In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules

## Policy Analysis Report: Withdrawal of Indian Standards (October 6, 2022) **1. Executive Summary:** This report analyzes a notification issued by the Bureau of Indian Standards (BIS) on October 6, 2022, regarding the withdrawal of several Indian Standards. The notification, referenced as HQPUB01712020PUBBIS 418, details the cancellation of fifteen specific Indian Standards related to various dental materials, instruments, and compliance management systems. These standards were withdrawn effective September 28, 2022. This report provides an overview of the notification, its background, key changes, affected stakeholders, and the likely impact of these withdrawals. **2. Introduction:** This report aims to provide a clear and concise understanding of the BIS notification (Ref: HQPUB01712020PUBBIS 418) issued on October 6, 2022, concerning the withdrawal of specific Indian Standards. The analysis is based solely on the provided text of the notification. **3. Policy Overview:** This notification constitutes an *amendment* to existing standardization frameworks. * **Core Objective(s):** The core objective, as inferred from the text, is to update and revise the catalog of Indian Standards by withdrawing outdated or superseded standards. This likely aims to maintain the relevance and effectiveness of the Bureau of Indian Standards' quality control and certification processes. **4. Background and Rationale:** This notification represents an amendment, specifically a withdrawal of existing standards. The likely rationale for this specific amendment, based on the provided text, is that the listed Indian Standards (IS) have become obsolete or have been superseded by newer or revised standards. The withdrawals ensure that outdated specifications are no longer used as benchmarks for quality control, promoting the adoption of more current and relevant industry practices and technologies. **5. Key Provisions / Changes:** This notification functions as an amendment, specifically the withdrawal of established standards. The key changes introduced are: * **Specific Part of Original Policy Changed:** This notification specifically alters the *list of active and valid Indian Standards*. By withdrawing the standards, they are no longer considered current benchmarks. * **New Rule/Provision:** The "new rule" is that the fifteen listed Indian Standards are *no longer valid or enforceable* as of September 28, 2022. They are officially "cancelled and stand withdrawn." * **Effect of Change:** The effect of this change is that manufacturers, suppliers, and other stakeholders can no longer rely on these specific withdrawn standards for product specifications, testing, or certification purposes. They must adhere to any updated or alternative standards that may be in place. Specifically, the following standards have been withdrawn: * IS 5941 : 1970 Specification for Dental Engine, Electric * IS 6035 : 1986 Specification for Zinc Phosphate Dental Cement * IS 6043 : 1970 Specification for Copper Phosphate Zinc Phosphate Dental Cement * IS 6462 : 1972 Fitting Dimensions for Dental Burs and Cutters * IS 6525 : 1972 Specification for Syringe, Hypodermic, Dental for Interchangeable Needle * IS 6555 : 1972 Specification for Dental Laboratory Plaster * IS 6811 : 1972 Specification for Syringe, Water, Self Filling , Dental * IS 6814 : 1972 Specification for Syringe, Air and Water, Dental * IS 8022 : 1972 Specification for Acrylic Resin Teeth * IS 8409 : 1991 Cardiovasular Surgery Instruments Dilator, Valve , Tubbs Mitral Pattern * IS 9940 : 1981 Specification for Trimmers, Electrically Operated for Dental Models * IS 12797 : 1989 Dental Materials Dental Glass Polyalkenoate Cements Specification * IS 12855 : 1989 Dental Materials Root Canal Sealing Materials Specification * IS 14977 : 2001 Control Charts Based on Inspection by Gauging * ISISO 19600 : 2014 Compliance Management Systems Guidelines **6. Target Audience and Stakeholders:** Based on the provided text, the primary target audience and stakeholders are: * Manufacturers and suppliers of dental equipment, materials, and related products. * Dental professionals and laboratories. * Organizations responsible for quality control and certification of dental products. * Organizations using Control Charts Based on Inspection by Gauging * Organizations using Compliance Management Systems Guidelines **7. Implementation Aspects (Inferred):** * **Responsible Agency/Bodies:** The Bureau of Indian Standards (BIS) is the responsible agency for implementing this notification. * **Timelines/Procedures:** The withdrawal of the listed standards is effective from September 28, 2022, as explicitly stated. The notification itself serves as the official communication of this change. **8. Expected Outcomes / Impact of Changes:** The likely intended outcome of these withdrawals is to ensure that industry practices align with current technological advancements and regulatory requirements. The potential impact of these specific changes includes: * Manufacturers must cease production according to the withdrawn standards. * Suppliers must ensure compliance with new and existing standard revisions. * Stakeholders should seek guidance and review existing processes with the new changes to ensure industry best practice. **9. Conclusion:** The BIS notification dated October 6, 2022, regarding the withdrawal of fifteen Indian Standards represents an update to the national standardization framework. This report helps identify the withdrawal standards, the rational for change, and the potential impact these withdrawals will have on industry. This change necessitates the reassessment of current practices, the adoption of updated standards, and a commitment to quality and compliance.

Key Entities Referenced