## Report on Bureau of Indian Standards Notification Regarding Withdrawal of Indian Standards
**1. Executive Summary:**
This report analyzes a notification issued by the Bureau of Indian Standards (BIS) regarding the withdrawal of several Indian Standards. The core purpose of this notification is to officially cancel and withdraw outdated or superseded standards, effective May 31, 2022. Key findings include the extensive list of standards withdrawn, covering a wide range of industrial and technical areas, including cinematography, earth moving machinery, vacuum technology, and various industrial equipment components. This suggests a systematic review and updating process of Indian Standards by the BIS.
**2. Introduction:**
This report provides an overview of a notification published by the Bureau of Indian Standards (BIS) concerning the withdrawal of several Indian Standards. The analysis is based solely on the provided text of the notification. This report aims to inform affected industries and stakeholders about the changes and their potential implications.
**3. Policy Overview:**
This notification constitutes an amendment to the body of Indian Standards.
* **Core Objective(s):** The primary objective, as inferred from the text, is to maintain the relevance and efficacy of Indian Standards by withdrawing outdated or superseded standards. This ensures that current standards accurately reflect best practices and technological advancements.
**4. Background and Rationale:**
This is an amendment to existing standards by way of withdrawal of certain standards. The likely reason for this specific amendment is to remove obsolete standards from circulation, ensuring that industries and stakeholders rely on the most current and applicable guidelines. The withdrawal likely reflects a review process where the BIS identified standards that are no longer relevant or have been replaced by newer versions or alternative technologies.
**5. Key Provisions / Changes:**
This notification specifically details the *withdrawal* of numerous Indian Standards.
* **What specific part of the original policy is being changed:** The notification removes specific existing standards from the list of active Indian Standards.
* **What the *new* rule/provision *is*, based *only* on the amendment text:** The new provision is that the listed Indian Standards are officially cancelled and withdrawn from use as of May 31, 2022. Specifically, the standards listed are no longer considered valid or enforceable by BIS.
* **Explain the *difference* or the *effect* of this specific change:** The effect of this change is that any product, process, or service that previously adhered to these withdrawn standards can no longer claim compliance. Industries must now refer to newer or alternative standards to ensure adherence to current requirements. The table details standards withdrawn. It lists the IS number, year, title, and withdrawal date (May 31, 2022). This table forms the core of the amendment.
**6. Target Audience and Stakeholders:**
The primary target audience includes manufacturers, suppliers, testing laboratories, and other organizations that previously relied on the withdrawn Indian Standards. Stakeholders also include consumers who benefit indirectly from products and services that adhere to relevant standards.
**7. Implementation Aspects (Inferred):**
* **Responsible agency/bodies mentioned:** The Bureau of Indian Standards (BIS) is the responsible agency for implementing and enforcing these changes. The notification is issued under the authority of the Bureau of Indian Standards Rules, 2018.
* **Any timelines or procedures specified *in the text*?** The withdrawal is effective from May 31, 2022. There are no specific procedures outlined in this text, but it's implied that industries are expected to cease using the withdrawn standards from that date.
**8. Expected Outcomes / Impact of Changes:**
The intended outcome of these changes is to ensure that industries adhere to the most up-to-date standards, promoting product quality, safety, and efficiency. The impact of these withdrawals includes the need for affected organizations to:
* Identify and update their processes and products to comply with newer or alternative standards.
* Ensure that references to the withdrawn standards are removed from documentation and quality control procedures.
* Potentially undergo re-certification or testing to demonstrate compliance with current standards.
**9. Conclusion:**
The BIS notification regarding the withdrawal of Indian Standards represents a crucial step in maintaining the relevance and effectiveness of the Indian standardization system. By removing outdated standards, the BIS promotes the adoption of current best practices and technological advancements across various industries. Affected stakeholders must take immediate action to adapt to these changes and ensure continued compliance with relevant standards. It is recommended that these industries determine updated standards applicable to their process.
Key Entities Referenced
NEW DELHI: Place of publication of the gazette
Bureau of Indian Standards: Organization responsible for setting Indian standards.
Bureau of Indian Standards Rules, 2018: A set of rules under which the Bureau of Indian Standards operates.
Department of Consumer Affairs: The department under which the Bureau of Indian Standards falls.
Indian Standards: Standards cancelled and withdrawn as part of the notification.
IS 4495 : 1992: Indian Standard related to Cinematography Light Output of Narrow Gauge Film Projectors Method of Measurement
IS 4988 Part 4 : 1968: Indian Standard related to Glossary of terms and Classification of Earth Moving Machinery Part 4 Excavators
IS 5353 : 1969: Indian Standard related to Screen Luminance for the Projection of 35 mm Film on Matt and Directional Screens
IS 5673 : 1970: Indian Standard related to Methods of Tests for Still Projectors
IS 7369 : 1983: Indian Standard related to Specification for Wheels and Castors First Revision
IS 8245 : 1976: Indian Standard related to Graphical Symbols for Vacuum Technology
IS 8262 Part 1 : 1976: Indian Standard related to Specification for Quick Release Couplings for Vacuum Pipelines Part 1 Screwed Type
IS 8576 : 1977: Indian Standard related to Purchasers Data Sheet for General Purpose Dryers
IS 8577 : 1977: Indian Standard related to Purchasers Data Sheet for Rotary Vacuum Filters
IS 8578 : 1977: Indian Standard related to Purchasers Data Sheet for Pulverizers
IS 8579 : 1977: Indian Standard related to Purchasers Data Sheet for Crystallizers
IS 8580 : 1977: Indian Standard related to Suppliers Data Sheet for Vibrating Screens
IS 8581 : 1977: Indian Standard related to Suppliers Data Sheet for Cooling Towers for Process Industry
IS 8582 : 1977: Indian Standard related to Suppliers Data Sheet for Basket Type Centrifuges
IS 8667 : 1977: Indian Standard related to Purchasers Data Sheet for Cooling Tower for Process Industry
ISISO 9373: Indian Standard related to Cranes and Related Equipment Accuracy Requirements for measuring Parameters During Testing
IS 10039 : 1981: Indian Standard related to Specification for Number Printing Machines, HandOperated
IS 10092 : 1982: Indian Standard related to Glossary of Terms and Materials of Construction of Rotary Equipment
IS 10120 : 1982: Indian Standard related to Suppliers Data Sheet for Rotary Dryers
IS 10217 : 1982: Indian Standard related to Method of Determination of Crushability Index
IS 10218 : 1982: Indian Standard related to Method of Determination of Grindability Index
IS 10219 : 1982: Indian Standard related to Purchasers Data Sheet for Tube Nest Evaporation Plants
IS 10247 : 1982: Indian Standard related to Method of determination of Impact Index
IS 10409 : 1983: Indian Standard related to Purchasers Data Sheet for Rotary Type Dryer
IS 10732 : 1983: Indian Standard related to Purchasers Data Sheet for Gauge Glasses for Pressure Vessels
IS 10739 : 1983: Indian Standard related to Dimensions for Model ICartridge Camera Interface and Take up Core Drive of 8 mm Type S Motion Picture Camera Cartridge
IS 10875 : 1983: Indian Standard related to Glossary of Terms and Material of Construction for Rotary Dryers and Coolers
IS 10906 : 1992: Indian Standard related to Photography Camera using Films 35 mm and 16 mm Films Pictures sizes Adoption of ISO 1754 : 1986
IS 10919 : 1984: Indian Standard related to Glossary of Terms for Electrostatic Precipitators
IS 11555 Part 1 : 1986: Indian Standard related to Designers Data Sheet Part 1 Mechanical Design of Columns
IS 11555 Part 2 : 1986: Indian Standard related to Designers Data Sheet Part 2 Column Internal
IS 11556 : 1986: Indian Standard related to Purchasers Data Sheet for Distillation Columns
IS 11564 : 1986: Indian Standard related to Suppliers Data Sheet for Fluid Bed Dryers
IS 11565 : 1986: Indian Standard related to Data Sheet for Industrial Ovens
IS 11572 : 1986: Indian Standard related to Purchasers Data Sheet for Fluid Bed Dryers
IS 11577 : 1985: Indian Standard related to Dimension for Projectable reels for 8mm type S Motion Picture Film for use with Projection Cassettes
IS 11760 : 1986: Indian Standard related to Specification for Gravity Fed Kerosene Wick Stove
IS 12090 : 1987: Indian Standard related to Dimensions of Rotary Tables for Direct Rotary Drilling Equipment
IS 12097 : 1994: Indian Standard related to Classification and Selection of Drilling Rigs for Water Well Drilling
IS 12355 : 1987: Indian Standard related to Suppliers data sheet for Vibrators for use with Bin and Hopper
IS 12356 : 1988: Indian Standard related to Purchasers Data Sheet for Clean air Equipment Laminar Flow
IS 12357 : 1988: Indian Standard related to Suppliers Data Sheet for Clean air Equipment Laminar Flow
IS 12962 : 1990: Indian Standard related to Data Sheet for Basic Engineering Plant Design
IS 15591 : 2005ISO 8569 : 1996: Indian Standard related to Mechanical Vibration and Shock Measurement and Evaluation of Shock and Vibration Effects on Sensitive Equipment in Buildings
RAJEEV SHARMA: Scientist F DDG Standardization I
Mayapuri, New Delhi: Location of the Government of India Press
Delhi: Place of publication of the gazette
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-17062022-236593
xxxGIDHxxx
CG-DL-E-17062022-236593
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 298] नई दिल्ली, मगं लिार, िनू 14, 2022/ज्य ष्े ठ 24, 1944
No. 298] NEW DELHI TUESDAY, JUNE 14, 2022/JYAISTHA 24, 1944
भारतीय मानक ब्यरू ो
(उपभोक्ता मामल े जिभाग)
अजधसचू ना
नई दिल्ली, 3 िून, 2022
सिं भ:भ HQ-PUB017/1/2020-PUB-BIS (365).---भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यरू ो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानको का जििरण
इसके साथ सलं ग्र अनूसूची म ें दिया गया ह,ै उन्ह ें कॉलम तीन म ें इंजगत तारीख को रद्द कर दिया या और िाजपस ल े जलया
गया ह।ै
अनसु चू ी
क्रम स.ं िाजपस जलए गए भारतीय मानकों की सख्ं या, िर् भ तथा िीर्कभ िाजपस जलए िान ेकी तारीख
(1) (2) (3)
1 आई एस 4495 : 1992 31 मई 2022
जसनेमैटोग्राफी ─ लघु गेि दिल्म प्रोिेक्टरों के जलए लाइट जनिेि ─
मापन पद्धजत
(पहला पुनरीक्षण)
4001 GI/2022 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
क्रम स.ं िाजपस जलए गए भारतीय मानकों की सख्ं या, िर् भ तथा िीर्कभ िाजपस जलए िान ेकी तारीख
(1) (2) (3)
2 आई एस 4988 (भाग 4) : 1968 31 मई 2022
अथभ मूविंग मिीनरी
भाग 4 उत्खनकों की िगीकरण और पाररभाजर्क िब्िािली
3 आई एस 5353 : 1969 31 मई 2022
मैट और दििात्मक पि े पर 35 एमएम दिल्म के प्रोिक्िन के जलए
पिाभ ज्योजतमभयता हते ु जिजिजि
4 आई एस 5673 : 1970 31 मई 2022
अचल प्रोिेक्िन के जलए परीक्षण की पद्धजत
5 आई एस 7369 : 1983 31 मई 2022
पजहयों और कैस्ट्टर की जिजिजि
(पहला पुनरीक्षण)
6 आई एस 8245 : 1976 31 मई 2022
जनिाभत प्रौद्योजगकी के जलए रैजखक प्रतीक
7 आई एस 8262 (भाग 1) : 1976 31 मई 2022
जनिाभत् पाइपलाइन के जलए िीघ्र जिमोची युग्मन हते ु जिजिजि
भाग 1 चडू ीिार टाइप
8 आई एस 8576 : 1977 31 मई 2022
सामान्य प्रयोिन के िुजष्कत्रों हेतु क्रेता की आंकडा िीट
9 आई एस 8577 : 1977 31 मई 2022
घूणी जनिाभत् दिल्टर के जलए क्रेता की आंकडा िीट
10 आई एस 8578 : 1977 31 मई 2022
पलिराइिर के जलए क्रेता की आंकडा िीट
11 आई एस 8579 : 1977 31 मई 2022
दक्रस्ट्टलाइज़र के जलए क्रेता की आंकडा िीट
12 आई एस 8580 : 1977 31 मई 2022
कम्पन स्ट्क्रीन हेतु आपूर्तभकताभ आंकडा िीट
13 आई एस 8581 : 1977 31 मई 2022
प्रदक्रया उद्योग हेतु कूवलंग टॉिरों के जलए आपूर्तभकताभ आंकडा िीट
14 आई एस 8582 : 1977 31 मई 2022
बास्ट्केट टाइप मथानी हेत ुआपूर्तभकताभ आंकडा िीट
15 आई एस 8667 : 1977 31 मई 2022
प्रदक्रया उद्योग के जलए कूवलंग टॉिरों हेतु क्रेता की आंकडा िीट
16 आई एस/आई एस ओ 9373 : 31 मई 2022
क्रेन और संबंजधत उपस्ट्कर- परीक्षण के िौरान मापिंडों को मापने के जलए
सटीकता की अपेक्षाए ं
17 आई एस 10039 : 1981 31 मई 2022
नंबर वप्रंटटंग मिीन, हस्ट्त संचाजलत हेतु जिजिजि
18 आई एस 10092 : 1982 31 मई 2022[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
क्रम स.ं िाजपस जलए गए भारतीय मानकों की सख्ं या, िर् भ तथा िीर्कभ िाजपस जलए िान ेकी तारीख
(1) (2) (3)
रोटरी उपस्ट्कर की (और जनमाणभ की सामग्री) पाररभाजर्क िब्िािली
19 आई एस 10120 : 1982 31 मई 2022
घूणी िुजष्कत्र हेतु आपूर्तभकताभ आंकडा िीट
20 आई एस 10217 : 1982 31 मई 2022
क्रिेजबजलटी इंडेक्स के जनधाभरण करने की पद्धजत
21 आई एस 10218 : 1982 31 मई 2022
ग्राइंडेजबजलटी इंडेक्स के जनधाभरण करने की जिजध
22 आई एस 10219 : 1982 31 मई 2022
ट्यूब नेस्ट्ट िाष्पीकरण संयंत्रों के जलए क्रेता की आंकडा िीट
23 आई एस 10247 : 1952 31 मई 2022
प्रभाि इंडेक्स के जनधाभरण करने की जिजध
24 आई एस 10409 : 1983 31 मई 2022
घूणी टाइप िुजष्कत्र हेतु क्रेता की आंकडा िीट
25 आई एस 10732 : 1983 31 मई 2022
िाब पात्रों के जलए गेि ग्लास हते ु क्रेता की आंकडा िीट
26 आई एस 10739 : 1983 31 मई 2022
8 एमएम आयाम टाइप एस चलजचत्र कैमरा काररि का मॉडल I ─
काररि कैमरा अंतरपृष्ठ और टेक अप कोर ड्राइि
27 आई एस 10875 : 1983 31 मई 2022
घूणी िुजष्कत्र और कूलर के जलए पाररभाजर्क िब्िािली और जनमाभण की
सामग्री
28 आई एस 10906 : 1992 31 मई 2022
िोटोग्रािी ─ 35 एमएम और 16 एमएम की दिल्म का उपयोग करने
िाले कैमरे ─ जचत्र का साइि
(पहला पुनरीक्षण)
29 आई एस 10919 : 1984 31 मई 2022
जस्ट्थर जिद्युत अिक्षेपक के जलए पाररभाजर्क िब्िािली
30 आई एस 11555 (भाग 1) : 1986 31 मई 2022
जडज़ाइनर की आंकडा िीट
भाग 1 कॉलम का यांजत्रक जडज़ाइन
31 आई एस 11555 (भाग 2) : 1986 31 मई 2022
जडज़ाइनर की आंकडा िीट
भाग 2 आंतररक कॉलम
32 आई एस 11556 : 1986 31 मई 2022
आसजित कॉलम हते ु क्रेता की आंकडा िीट
33 आई एस 11564 : 1986 31 मई 2022
तरल बेड िुजष्कत्र हते ु आपूर्तभकताभ आंकडा िीट
34 आई एस 11565 : 1986 31 मई 2022
औद्योजगक ओिन के जलए आंकडा िीट4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
क्रम स.ं िाजपस जलए गए भारतीय मानकों की सख्ं या, िर् भ तथा िीर्कभ िाजपस जलए िान ेकी तारीख
(1) (2) (3)
35 आई एस 11572 : 1986 31 मई 2022
तरल बेड िुजष्कत्र हते ु क्रेता की आंकडा िीट
36 आई एस 11577 : 1985 31 मई 2022
प्रोिेक्िन कैसेट्स के साथ उपयोग हते ु 8 एमएम टाइप एस चलजचत्र
दिल्म के जलए प्रक्षेपणीय रील हते ु आयाम
37 आई एस 11760 : 1986 31 मई 2022
गुरुत्ि भररत केरोजसन बत्ती स्ट्टोि हते ु जिजिजि
38 आई एस 12090 : 1987 31 मई 2022
प्रत्यक्ष घणू ी िेधन उपस्ट्कर के जलए घूणी ताजलकाओं के आयाम
39 आई एस 12097 : 1994 31 मई 2022
िल कूप िेधन ररग्स का िगीकरण और चयन
40 आई एस 12355 : 1987 31 मई 2022
जबन और हॉपर के साथ उपयोग हते ु कजम्पत्र के जलए आपूर्तभकताभ की आंकडा
िीट
41 आई एस 12356 : 1988 31 मई 2022
स्ट्िच्छ िाय ु उपस्ट्कर हते ु क्रेता की आंकडा िीट (लाजमना प्रिाह)
42 आई एस 12357 : 1988 31 मई 2022
स्ट्िच्छ िाय ु उपस्ट्कर हते ु आपूर्तकभ ता भ की आंकडा िीट (लाजमना प्रिाह)
43 आई एस 12962 : 1990 31 मई 2022
बुजनयािी इंिीजनयटरंग संयंत्र जडिाइन हेतु आंकडा िीट
44 आई एस 15591 : 2005/ आई एस ओ 8569: 1996 31 मई 2022
भिनों में संिेिनिील उपस्ट्करों पर यांजत्रक कंपन और आघात मापन और आघात
मूल्यांकन और कंपन प्रभाि’
रािीि िमाभ, िैज्ञाजनक एि एि ंउपमहाजनिेिक (मानकीकरण – I)
[जिज्ञापन III/4/असा./120/2022-23]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 3rd June, 2022
Ref: HQ-PUB017/1/2020-PUB-BIS (365).---In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that the Indian standards, particulars of
which are given in schedule hereto annexed have been cancelled and stands withdrawn from the date indicated against
it in the third column.
SCHEDULE
Sl. No., Year & Title of the Indian Standard Withdrawn Date of Withdrawal
No.
(1) (2) (3)
1 IS 4495 : 1992 31 May 2022
Cinematography ─ Light Output of Narrow Gauge Film
Projectors ─ Method of Measurement[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
Sl. No., Year & Title of the Indian Standard Withdrawn Date of Withdrawal
No.
(1) (2) (3)
2 IS 4988 (Part 4) : 1968 31 May 2022
Glossary of terms and Classification of Earth Moving Machinery
Part 4 Excavators
3 IS 5353 : 1969 31 May 2022
Screen Luminance for the Projection of 35 mm Film on Matt and
Directional Screens
4 IS 5673 : 1970 31 May 2022
Methods of Tests for Still Projectors
5 IS 7369 : 1983 31 May 2022
Specification for Wheels and Castors
(First Revision)
6 IS 8245 : 1976 31 May 2022
Graphical Symbols for Vacuum Technology
7 IS 8262 (Part 1) : 1976 31 May 2022
Specification for Quick Release Couplings for Vacuum Pipelines
Part 1 Screwed Type
8 IS 8576 : 1977 31 May 2022
Purchaser’s Data Sheet for General Purpose Dryers
9 IS 8577 : 1977 31 May 2022
Purchaser’s Data Sheet for Rotary Vacuum Filters
10 IS 8578 : 1977 31 May 2022
Purchaser’s Data Sheet for Pulverizers
11 IS 8579 : 1977 31 May 2022
Purchaser’s Data Sheet for Crystallizers
12 IS 8580 : 1977 31 May 2022
Supplier’s Data Sheet for Vibrating Screens
13 IS 8581 : 1977 31 May 2022
Supplier’s Data Sheet for Cooling Towers for Process Industry
14 IS 8582 : 1977 31 May 2022
Supplier’s Data Sheet for Basket Type Centrifuges
15 IS 8667 : 1977 31 May 2022
Purchaser’s Data Sheet for Cooling Tower for Process Industry
16 IS/ISO 9373 31 May 2022
Cranes and Related Equipment ─ Accuracy Requirements for
measuring Parameters During Testing
17 IS 10039 : 1981
31 May 2022
Specification for Number Printing Machines, Hand-Operated
18 IS 10092 : 1982 31 May 2022
Glossary of Terms (and Materials of Construction) of Rotary
Equipment
19 IS 10120 : 1982 31 May 2022
Supplier’s Data Sheet for Rotary Dryers
IS 10217 : 1982 31 May 2022
20 Method of Determination of Crushability Index
IS 10218 : 1982 31 May 2022
21 Method of Determination of Grindability Index
IS 10219 : 1982 31 May 2022
22 Purchaser’s Data Sheet for Tube Nest Evaporation Plants
IS 10247 : 1982 31 May 2022
23 Method of determination of Impact Index
IS 10409 : 1983 31 May 2022
24 Purchaser’s Data Sheet for Rotary Type Dryer
IS 10732 : 1983 31 May 2022
25 Purchaser’s Data Sheet for Gauge Glasses for Pressure Vessels
IS 10739 : 1983 31 May 2022
26 Dimensions for Model I-Cartridge Camera Interface and Take up
Core Drive of 8 mm Type S Motion Picture Camera Cartridge6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Sl. No., Year & Title of the Indian Standard Withdrawn Date of Withdrawal
No.
(1) (2) (3)
27 IS 10875 : 1983 31 May 2022
Glossary of Terms and Material of Construction for Rotary
Dryers and Coolers
28 IS 10906 : 1992 31 May 2022
Photography ─ Camera using Films 35 mm and 16 mm Films ─
Pictures sizes (Adoption of ISO 1754 : 1986)
29 IS 10919 : 1984 31 May 2022
Glossary of Terms for Electrostatic Precipitators
30 IS 11555 (Part 1) : 1986 31 May 2022
Designer’s Data Sheet
Part 1 Mechanical Design of Columns
31 IS 11555 (Part 2) : 1986 31 May 2022
Designer’s Data Sheet
Part 2 Column Internal
32 IS 11556 : 1986 31 May 2022
Purchaser’s Data Sheet for Distillation Columns
33 IS 11564 : 1986 31 May 2022
Supplier’s Data Sheet for Fluid Bed Dryers
IS 11565 : 1986
34 31 May 2022
Data Sheet for Industrial Ovens
IS 11572 : 1986
35 31 May 2022
Purchaser’s Data Sheet for Fluid Bed Dryers
36 IS 11577 : 1985 31 May 2022
Dimension for Projectable reels for 8mm type S Motion Picture
Film for use with Projection Cassettes
37 IS 11760 : 1986 31 May 2022
Specification for Gravity Fed Kerosene Wick Stove
38 IS 12090 : 1987 31 May 2022
Dimensions of Rotary Tables for Direct Rotary Drilling
Equipment
39 IS 12097 : 1994 31 May 2022
Classification and Selection of Drilling Rigs for Water Well
Drilling
40 IS 12355 : 1987 31 May 2022
Supplier’s data sheet for Vibrators for use with Bin and Hopper
41 IS 12356 : 1988 31 May 2022
Purchaser’s Data Sheet for Clean air Equipment (Laminar Flow)
42 IS 12357 : 1988 31 May 2022
Supplier’s Data Sheet for Clean air Equipment (Laminar Flow)
43 IS 12962 : 1990 31 May 2022
Data Sheet for Basic Engineering Plant Design
44 IS 15591 : 2005/ISO 8569 : 1996 31 May 2022
Mechanical Vibration and Shock ─ Measurement and Evaluation
of Shock and Vibration Effects on Sensitive Equipment in
Buildings
RAJEEV SHARMA, Scientist F & DDG (Standardization – I)
[ADVT.-III/4/Exty./120/2022-23]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.