## Report on Bureau of Indian Standards Notification Regarding Indian Standards
**1. Executive Summary:**
This report analyzes a notification from the Bureau of Indian Standards (BIS) regarding the establishment, revision, and withdrawal of several Indian Standards related primarily to electrical components, specifically winding wires and adjustable speed electrical power drive systems. This notification serves to update and refine existing standards, ensuring their relevance and alignment with technological advancements. The key finding is the establishment of new standards in June 2025, concurrent enforcement of older standards with planned withdrawal in December 2025, indicating a transition and update process.
**2. Introduction:**
This report provides an overview and analysis of the notification published by the Bureau of Indian Standards (BIS) concerning the establishment, revision, and withdrawal of specific Indian Standards. The analysis is based solely on the provided policy text and aims to inform affected industries about the details and implications of this notification.
**3. Policy Overview:**
This notification is implicitly an amendment of existing standards by the Bureau of Indian Standards (BIS). The core objective, as inferred from the text, is to maintain and update a set of Indian Standards relevant to the manufacture and performance of electrical components. This involves establishing new standards, revising existing ones, and withdrawing outdated standards to ensure industry compliance with current best practices.
**4. Background and Rationale:**
The rationale for this specific amendment lies in the need to adapt standards to technological advancements and evolving industry practices. Specifically, the older standards listed for concurrent enforcement until withdrawal in December 2025 suggest a desire for a smooth transition to the newer versions. The notification updates references to International Electrotechnical Commission (IEC) standards, suggesting an effort to harmonize Indian standards with international practices.
**5. Key Provisions / Changes:**
This notification introduces the following key changes to Indian Standards related to electrical components:
* **Establishment of New Standards:** Several new standards were established on June 2, 2025, including:
* IS 13730 Part 27Sec 3 : 2025: Specification for Particular Types of Winding Wires Part 27 Paper Tape Covered Rectangular Copper Wire Section 3.
* IS 13730 Part 27Sec 4 : 2025: Specification for Paper Covered Aluminium Conductors of Winding Wires Part II Rectangular Part 27 Paper Tape Covered Conductors Section 4.
* IS 17123 Parts 1, 3, 5Sec 1, 5Sec 3, and 7Sec 201 : 2025: Standards related to Adjustable Speed Electrical Power Drive Systems.
* ISIEC 6003423 : 2019 : Rotating Electrical Machines Part 23 Repair, Overhaul and Reclamation.
* **Concurrent Enforcement and Withdrawal:** The notification specifies that older versions of these standards will remain in force concurrently until December 2, 2025, at which point they will be withdrawn. This includes:
* IS 13730 Part 27 : 2018
* IEC 6031727 : 2013 AMD 1 : 2024
* IS 6162 Part II 1971 AMD 1 : 2024 CSV
* IS 17123 Part 1 : 2019
* IEC 618001 : 2021
* ISIEC 618003 : 2017
* ISIEC 6180051 : 2016
* **Difference/Effect:** This change means that manufacturers and other stakeholders will need to comply with the *new* standards established in June 2025. The concurrent enforcement period allows for a transition from the older standards, providing time for manufacturers to adapt their processes and products to meet the new requirements. The withdrawal of older standards after the transition period ensures that only the updated standards are in effect.
**6. Target Audience and Stakeholders:**
The target audience and stakeholders primarily include:
* Manufacturers of winding wires (copper and aluminum)
* Manufacturers of adjustable speed electrical power drive systems
* Manufacturers of rotating electrical machines
* Testing laboratories and certification bodies
* Users of electrical components and systems
**7. Implementation Aspects (Inferred):**
* **Responsible Agency:** The Bureau of Indian Standards (BIS) is the responsible agency for implementing and enforcing these standards.
* **Timelines:** The notification clearly specifies the establishment date (June 2, 2025) and the withdrawal date (December 2, 2025) for the superseded standards. This provides a concrete timeline for industry stakeholders to adapt to the changes. It can be inferred that compliance will be expected by December 2, 2025 with the new standards, for continued production.
* **Procedures:** Although the notification doesn't explicitly outline procedures, it implies that manufacturers will need to update their testing and certification processes to align with the new standards before December 2, 2025.
**8. Expected Outcomes / Impact of Changes:**
The likely intended outcomes of these changes include:
* **Improved Quality and Safety:** Updated standards for winding wires and power drive systems are expected to lead to improved product quality and safety.
* **Technological Advancement:** The incorporation of IEC standards suggests an alignment with international best practices and technological advancements in the electrical component industry.
* **Enhanced Competitiveness:** Compliance with updated standards can enhance the competitiveness of Indian manufacturers in the global market.
* **Reduced Risk:** The repair, overhaul, and reclamation standards help ensure the safety and reliability of existing machinery, which is safer for the user.
**9. Conclusion:**
The BIS notification regarding the establishment, revision, and withdrawal of Indian Standards is a crucial update for the electrical component industry. The establishment of new standards and the planned withdrawal of older versions signals a commitment to continuous improvement and alignment with international practices. Stakeholders need to be aware of these changes and proactively adapt their processes to ensure compliance and benefit from the enhanced quality and safety standards. The concurrent enforcement period allows for a smooth transition, but manufacturers must act within the specified timeline to comply by December 2, 2025.
Key Entities Referenced
ISIEC 618003 : 2017: Superseded Indian Standard.
NEW DELHI: Location of publication.
JUNE 13, 2025: Date of publication of the gazette.
JYAISTHA 23, 1947: Date of publication according to the Indian national calendar.
THE GAZETTE OF INDIA: Title of the publication.
Bureau of Indian Standards: Organization responsible for establishing Indian standards.
Department of Consumer Affairs: The government department to which the Bureau of Indian Standards belongs.
June, 2025: Month and year of the notification.
Bureau of Indian Standards Rules, 2018: The set of rules under which the notification is issued.
Indian standards: Standards established by the Bureau of Indian Standards.
IS 13730 Part 27Sec 3 : 2025: Identified Indian Standard.
IS 13730 Part 27 : 2018: Superseded Indian Standard.
December 2025: Withdrawal date for superseded standards.
IEC 60317273 : 2019: Identified International Electrotechnical Commission Standard.
IEC 6031727 : 2013: Superseded International Electrotechnical Commission Standard.
AMD 1 : 2024: Amendment to a standard.
IS 13730 Part 27Sec 4 : 2025: Identified Indian Standard.
IS 6162 Part II 1971: Superseded Indian Standard.
IEC 60317274 : 2020: Identified International Electrotechnical Commission Standard.
IS 17123 Part 1 : 2025: Identified Indian Standard.
IS 17123 Part 1 : 2019: Superseded Indian Standard.
IEC 618001 : 2021: Identified International Electrotechnical Commission Standard.
IEC 618001 : 1997: Superseded International Electrotechnical Commission Standard.
IS 17123 Part 3 : 2025: Identified Indian Standard.
IEC 618003 : 2022: Identified International Electrotechnical Commission Standard.
IS 17123 Part 5Sec 1 : 2025: Identified Indian Standard.
ISIEC 6180051 : 2016: Superseded Indian Standard.
IEC 6180051 : 2022: Identified International Electrotechnical Commission Standard.
IS 17123 Part 5Sec 3 : 2025: Identified Indian Standard.
IEC 6180053 : 2021: Identified International Electrotechnical Commission Standard.
IS 17123 Part 7Sec 201 : 2025: Identified Indian Standard.
IEC 618007201 : 2015: Identified International Electrotechnical Commission Standard.
ISIEC 6003423 : 2019: Identified Indian Standard.
CHITRA GUPTA: Scientist G DDG Hallmarking and Training.
Government of India Press, Ring Road, Mayapuri, New Delhi110064: Location of the printing press.
Controller of Publications, Delhi110054: Publisher of the gazette.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-16062025-263851
xxxGIDHxxx
CG-DL-E-16062025-263851
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण्ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 428] नई दिल्ली, िुक्रिार, िनू 13, 2025/ज्य ष्े ठ 23, 1947
No. 428] NEW DELHI, FRIDAY, JUNE 13, 2025/JYAISTHA 23, 1947
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल े जिभाग)
अजधसचू ना
नई दिल्ली, 4 िून, 2025
सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (1250).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण
इसम ें संलग्न अनूसूची के जद्वतीय स्ट्तंभ म ें दिय े गय े ह,ैं तीसरे स्ट्तभं म ें इंजगत जतजि को स्ट्िाजपत हो गय े ह|ैं चौिे स्ट्तंभ म ें दिय े
गय े मानकों के जििरण, यदि कोई हो तो ि े भी साि-साि लाग ू रहगें े िब तक ि े पााँचि ें स्ट्तंभ म ें इंजगत जतजि को िापस जलए
िाने ह|ैं
3815 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
अनसु चू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन भारतीय मानकों, यदि िापस जलए िापस होने की
स.ं जतजि जतजि
तिा िीर्भक िाने ह,ैं की संख्या, िर् भ तिा िीर्भक
(1) (2) (3) (4) (5)
1 2 िून 2025
आई एस 13730 (भाग 27/अनुभाग 3) : आई एस 13730 (भाग 27) : 2018 2 दिसम्बर 2025
2025 आई ई सी 60317-27 : 2013
आई ई सी 60317-27-3 : 2019 जििेर् प्रकार के कुंडलण तारें की
जिजिजियााँ
+ ए एम डी 1 : 2024 सी एस िी
भाग 27 कागज़ टेप आच्छादित
जििेर् प्रकार की कुंडलण तारों की
आयताकार तााँबे के तार
जिजिजि
(पहला पुनरीक्षण)
भाग 27 कागज़ टेप से आच्छादित
अनुभाग 3 आयताकार तांबे के तार
2 2 िून 2025
आई एस 13730 (भाग 27/अनुभाग 4) : आई एस 6162 (भाग II) – 1971 2 दिसम्बर 2025
2025 कागि से ढके एल्यूजमजनयम कंडक्टसभ के
जलए जिजिजि
आई ई सी 60317-27-4 : 2020
भाग II आयताकार कंडक्टर
+ ए एम डी 1 : 2024 सी एस िी
जििेर् प्रकार की कुंडलण तारों की
जिजिजि
भाग 27 कागज़ टेप से आच्छादित
अनुभाग 4 आयताकार एल्यूमीजनयम के
तार
3 2 िून 2025
आई एस 17123 (भाग 1) : 2025 आई एस 17123 (भाग 1) : 2019 2 दिसम्बर 2025
आई ई सी 61800-1 : 2021 आई ई सी 61800-1 : 1997
समायोज्य गजत जिद्युत चालन यंत्र समायोज्य गजत जिद्युत चालन यंत्र
भाग 1 सामान्य अपेक्षाएाँ — जनम्न भाग 1 सामान्य अपेक्षाएं — जनम्न
िोल्टता समायोज्य गजत डी.सी. चालकों िॉल्टता समायोज्य गजत डी.सी.
के जलए रेटटंग जिजिजि चालकों के जलए रेटटंग जिजिजि
(पहला पुनरीक्षण)
4 2 िून 2025
आई एस 17123 (भाग 3) : 2025 आई एस/आई ई सी 61800-3 : 2017 2 दिसम्बर 2025
आई ई सी 61800-3 : 2022 एडिस्ट्टेबल स्ट्पीड इलेजक्रकल पािर
ड्राइि जसस्ट्टम
समायोज्य गजत जिद्युत चालन यंत्र
भाग 3 जिद्युत चुम्बकीय संगतता
भाग 3 पीडीएस और मिीन टूल्स के
अपेक्षाएं एि ं जिजिि परीक्षण पद्धजतयााँ
जलए ईएमसी अपेक्षाएाँ औए जिजिि
परीक्षण पद्धजतयााँ[भाग III—खण्ड 4] भारत का रािपत्र : असाधारण 3
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन भारतीय मानकों, यदि िापस जलए िापस होने की
स.ं जतजि जतजि
तिा िीर्भक िाने ह,ैं की संख्या, िर् भ तिा िीर्भक
(1) (2) (3) (4) (5)
5 2 िून 2025
आई एस 17123 (भाग 5/अनभु ाग 1) : आई एस/आई ई सी 61800-5-1 : 2 दिसम्बर 2025
2025 2016
आई ई सी 61800-5-1 : 2022 समायोज्य चाल जिद्युतीय पािर ड्राइि
प्रणाली
समायोज्य गजत जिद्युत चालन यंत्र
भाग 5 संरक्षा अपेक्षाएं
भाग 5 सुरक्षा अपेक्षाएाँ
अनुभाग 1 जिद्युत्, उष्मीय एि ंऊिाभ
अनुभाग 1 जिद्युत, उष्मीय एि ंऊिाभ
6 2 िून 2025
आई एस 17123 (भाग 5/अनभु ाग 3) : लाग ू नहीं लाग ू नहीं
2025
आई ई सी 61800-5-3 : 2021
समायोज्य गजत जिद्युत चालन यंत्र
भाग 5 सुरक्षा अपेक्षाएाँ
अनुभाग 3 एनकोडर के जलए कायाभत्मक
जिद्युत और पयाभिरण संबंधी अपेक्षाएाँ
7 2 िून 2025
आई एस 17123 (भाग 7/अनभु ाग 201) लाग ू नहीं लाग ू नहीं
: 2025
आई ई सी 61800-7-201 : 2015
समायोज्य गजत जिद्युत चालन यंत्र
भाग 7 सामान्य इंटरफेस और पािर
ड्राइि जसस्ट्टम के जलए प्रोफाइल का
उपयोग
अनुभाग 201 प्रोफाइल प्रकार 1 —
जिजिजि
8 2 िून 2025
आई एस/आई ई सी 60034-23 : 2019 लाग ू नहीं लाग ू नहीं
जिद्युत घूणभन मिीन ें
भाग 23 मरम्मत, ओिरहाल और
पुनर्ग्भहण
जचत्रा गुप्ता, िैज्ञाजनक िी एि ंउप महाजनिेिक (हॉलमार्किंग एि ं रेननंग)
[जिज्ञापन-III/4/असा./161/2025-26]4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 4th June, 2025
Ref: HQ-PUB013/1/2020-PUB-BIS (1250).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which
are given in the second column of the schedule hereto annexed have been established on the date indicated against it in
third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force
concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be Withdrawal
Withdrawn, if any
(1) (2) (3) (4) (5)
2 June 2025
1 IS 13730 (Part 27/Sec 3) : 2025 IS 13730 (Part 27) : 2018 2 December 2025
IEC 60317-27-3 : 2019 IEC 60317-27 : 2013
+ AMD 1 : 2024 CSV Specifications for Particular
Specification for Particular Types Types of Winding Wires
of Winding Wires Part 27 Paper Tape Covered
Part 27 Paper Tape Covered Rectangular Copper Wire
Section 3 Rectangular Copper (First Revision)
Wire
2 June 2025
2 IS 13730 (Part 27/Sec 4) : 2025 IS 6162 (Part II) – 1971 2 December 2025
IEC 60317-27-4 : 2020 Specification for Paper
+ AMD 1 : 2024 CSV Covered Aluminium
Specification for Particular Types Conductors
of Winding Wires Part II Rectangular
Part 27 Paper Tape Covered Conductors
Section 4 Rectangular Aluminium
Wire
2 June 2025
3 IS 17123 (Part 1) : 2025 IS 17123 (Part 1) : 2019 2 December 2025
IEC 61800-1 : 2021 IEC 61800-1 : 1997
Adjustable Speed Electrical Power Adjustable Speed Electrical
Drive Systems Power Drive Systems
Part 1 General Requirements — Part 1 General Requirements
Rating Specifications for Low — Rating Specifications for
Voltage Adjustable Speed d.c. Low Voltage Adjustable
Power Drive Systems Speed d.c. Power Drive
(First Revision) Systems
2 June 2025
4 IS 17123 (Part 3) : 2025 IS/IEC 61800-3 : 2017 2 December 2025
IEC 61800-3 : 2022 Adjustable Speed Electrical
Adjustable Speed Electrical Power Power Drive Systems
Drive Systems Part 3 EMC Requirements and
Part 3 EMC Requirements and Specific Test Methods
Specific Test Methods for PDS
and Machine Tools
2 June 2025
5 IS 17123 (Part 5/Sec 1) : 2025 IS/IEC 61800-5-1 : 2016 2 December 2025
IEC 61800-5-1 : 2022 Adjustable Speed Electrical
Power Drive Systems[भाग III—खण्ड 4] भारत का रािपत्र : असाधारण 5
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be Withdrawal
Withdrawn, if any
(1) (2) (3) (4) (5)
Adjustable Speed Electrical Power Part 5 Safety Requirements
Drive Systems Section 1 Electrical, thermal
Part 5 Safety Requirements and energy
Section 1 Electrical, Thermal and
Energy
2 June 2025
6 IS 17123 (Part 5/Sec 3) : 2025 NA NA
IEC 61800-5-3 : 2021
Adjustable Speed Electrical Power
Drive Systems
Part 5 Safety Requirements
Section 3 Functional Electrical
and Environmental Requirements
for Encoders
2 June 2025
7 IS 17123 (Part 7/Sec 201) : 2025 NA NA
IEC 61800-7-201 : 2015
Adjustable Speed Electrical Power
Drive Systems
Part 7 Generic Interface and Use
of Profiles for Power Drive
Systems Section 201 Profile Type
1 — Specification
2 June 2025
8 IS/IEC 60034-23 : 2019 NA NA
Rotating Electrical Machines
Part 23 Repair, Overhaul and
Reclamation
CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training)
[ADVT.-III/4/Exty./161/2025-26]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.