## Report on Amendments to Indian Standards
**1. Executive Summary:**
This report analyzes notifications from the Bureau of Indian Standards (BIS) regarding amendments to various Indian Standards. The notifications, published in *The Gazette of India* in September 2022, concern amendments to standards related to cast iron drainage pipes, infant food and related products, textiles, colourants for plastics in contact with food, and bullet resistant morcha. The core purpose of these amendments is to update and revise existing standards, ensuring they remain relevant and effective. Key findings indicate a focus on maintaining quality and safety in these diverse sectors, with specific validity periods assigned to each amendment.
**2. Introduction:**
This report provides an overview and analysis of several notifications published by the Bureau of Indian Standards (BIS) in *The Gazette of India* in September 2022. The purpose of this report is to inform stakeholders about the specific amendments made to various Indian Standards based on the provided text.
**3. Policy Overview:**
This report concerns itself with amendments to existing Indian Standards. The core objective, inferred from the text, is to ensure that existing standards are updated and aligned with current best practices, technological advancements, and/or safety requirements within their respective industries. The notifications aim to maintain the relevance and efficacy of these standards by incorporating necessary modifications and revisions.
**4. Background and Rationale:**
The amendments likely address the need to update existing standards due to factors such as technological advancements, new safety concerns, evolving industry practices, or the identification of areas where the original standard was deficient. The rationale for each amendment is not explicitly stated in the provided text, but it can be inferred that they are necessary to ensure the continued applicability, accuracy, and effectiveness of the respective Indian Standards. For example, amendments to food-related standards might address new nutritional guidelines, while changes to the bullet-resistant morcha specification could reflect advancements in material science or security threats.
**5. Key Provisions / Changes:**
This section details the changes introduced by the provided amendment texts.
* **IS 1729:2002 Amendment No. 8 (Cast Iron/Ductile Iron Drainage Pipes):** This amendment to the Cast IronDuctile Iron Drainage Sept 2022 Pipes and Pipe Fittings for Over Ground NonPressure Pipeline Socket and Spigot Series Second Revision is valid until December 23, 2022. The specific changes implemented by the amendment are not detailed in the notification, but it can be inferred that they pertain to the specifications or requirements for cast iron drainage pipes and fittings.
* **IS 1656:2022 Amendment No. 1 (Infant Food Milk-Cereal Based Complimentary Foods):** This amendment to the Infant Food MilkCereal Sept 2022 Based Complimentary Foods Specification Fifth Revision is valid until March 27, 2023. The specific changes implemented by the amendment are not detailed in the notification, but it can be inferred that they pertain to the specifications or requirements for infant food.
* **IS 11536:2022 Amendment No. 1 (Processed Cereal Based Complimentary Foods):** This amendment to the ProcessedCereal Based Sept 2022 Complimentary Foods Specification Third Revision is valid until March 27, 2023. The specific changes implemented by the amendment are not detailed in the notification, but it can be inferred that they pertain to the specifications or requirements for processed cereal based complimentary foods.
* **IS 14433:2022 Amendment No. 1 (Infant Milk Substitutes):** This amendment to the Infant Milk Substitutes Sept 2022 Specification Second revision is valid until March 27, 2023. The specific changes implemented by the amendment are not detailed in the notification, but it can be inferred that they pertain to the specifications or requirements for infant milk substitutes.
* **IS 15757:2022 Amendment No. 1 (Infant Food Follow-Up Formula):** This amendment to the Infant Food FollowUp Sept 2022 Formula Specification First Revision is valid until March 27, 2023. The specific changes implemented by the amendment are not detailed in the notification, but it can be inferred that they pertain to the specifications or requirements for infant food follow-up formula.
* **IS 4727:2020 Amendment No. 1 (Textiles Nylon Webbing):** This amendment to the Textiles Nylon Webbing for Sept 2022 Aeronautical Purposes Specification First Revision is valid until October 23, 2022. The specific changes implemented by the amendment are not detailed in the notification, but it can be inferred that they pertain to the specifications or requirements for nylon webbing used in aeronautical applications.
* **IS 9833:2018 Amendment No. 1 (Colourants for Use in Plastics):** This amendment to the List of Colourants for Use in Sept 2022 Plastics in Contact with Foodstuffs and Pharmaceuticals Second Revision is valid until October 23, 2022. The specific changes implemented by the amendment are not detailed in the notification, but it can be inferred that they pertain to the permitted colourants used in plastics that come into contact with food and pharmaceuticals.
* **IS 17525:2021 Amendment No. 1 (Bullet Resistant Morcha):** This amendment to the Specification for Bullet Sept 2022 Resistant Morcha is valid until October 23, 2022. The specific changes implemented by the amendment are not detailed in the notification, but it can be inferred that they pertain to the specifications or requirements for bullet-resistant morchas.
**6. Target Audience and Stakeholders:**
Based on the provided text, the directly affected stakeholders include:
* Manufacturers of cast iron drainage pipes and fittings.
* Manufacturers of infant food products, including milk-cereal based complimentary foods, processed cereal based complimentary foods, infant milk substitutes, and infant food follow-up formula.
* Manufacturers of nylon webbing used for aeronautical purposes.
* Manufacturers of plastics used in contact with foodstuffs and pharmaceuticals, and colourant suppliers.
* Manufacturers of bullet-resistant morchas, and related security agencies.
**7. Implementation Aspects (Inferred):**
The Bureau of Indian Standards (BIS) is the responsible agency for establishing and notifying these amendments. The amendments are effective from the date of notification and are valid until the dates specified in the schedule. The text indicates that copies of the amendments are available for sale at BIS headquarters, regional offices, and branch offices, as well as for online purchase and download. No other specific procedures are mentioned in the provided text.
**8. Expected Outcomes / Impact of Changes:**
The intended outcomes of these amendments are likely to include:
* Improved quality and performance of cast iron drainage pipes and fittings.
* Enhanced safety and nutritional value of infant food products.
* Ensured reliability and safety of nylon webbing used in aeronautical applications.
* Safer use of colourants in plastics that come into contact with food and pharmaceuticals.
* Improved protection provided by bullet-resistant morchas.
* Ultimately, these amendments are expected to contribute to greater consumer safety and confidence in the quality of products and materials governed by these standards.
**9. Conclusion:**
The notifications from the Bureau of Indian Standards (BIS) detail important amendments to several Indian Standards across diverse sectors. These amendments aim to update and improve existing standards, ensuring they meet current needs and best practices. The specific changes implemented by each amendment are not detailed in the notifications, but it can be inferred that they are necessary to maintain the relevance and effectiveness of the respective Indian Standards. These updates are significant for manufacturers, suppliers, and consumers alike, contributing to improved product quality, safety, and performance.
Key Entities Referenced
Parwanoo: Branch Office of Bureau of Indian Standards located in Himachal Pradesh.
Bureau of Indian Standards: An organization that establishes and publishes Indian Standards.
Department of Consumer Affairs: The department under which the Bureau of Indian Standards operates.
New Delhi: The city where the notification is issued and the location of the Bureau of Indian Standards headquarters. Located in Delhi.
Bureau of Indian Standards Rules, 2018: The set of rules governing the operations of the Bureau of Indian Standards.
IS 1729 : 2002: Indian Standard for Cast IronDuctile Iron Drainage Pipes and Pipe Fittings for Over Ground NonPressure Pipeline Socket and Spigot Series Second Revision
IS 1656 : 2022: Indian Standard for Infant Food MilkCereal Based Complimentary Foods Specification Fifth Revision
IS 11536 : 2022: Indian Standard for ProcessedCereal Based Complimentary Foods Specification Third Revision
IS 14433 : 2022: Indian Standard for Infant Milk Substitutes Specification Second revision
IS 15757 : 2022: Indian Standard for Infant Food FollowUp Formula Specification First Revision
IS 4727 : 2020: Indian Standard for Textiles Nylon Webbing for Aeronautical Purposes Specification First Revision
IS 9833 : 2018: Indian Standard for List of Colourants for Use in Plastics in Contact with Foodstuffs and Pharmaceuticals Second Revision
IS 17525 : 2021: Indian Standard for Specification for Bullet Resistant Morcha
Manak Bhavan: Building where the Bureau of Indian Standards office is located, located in New Delhi, Delhi.
Kolkata: Regional Office of Bureau of Indian Standards located in West Bengal.
Chandigarh: Regional Office of Bureau of Indian Standards located in Chandigarh.
Chennai: Regional Office of Bureau of Indian Standards located in Tamil Nadu.
Mumbai: Regional Office of Bureau of Indian Standards located in Maharashtra.
Ahmedabad: Branch Office of Bureau of Indian Standards located in Gujrat
Bengaluru: Branch Office of Bureau of Indian Standards located in Karnataka.
Bhopal: Branch Office of Bureau of Indian Standards located in Madhya Pradesh.
Bhubaneshwar: Branch Office of Bureau of Indian Standards located in Orissa.
Coimbatore: Branch Office of Bureau of Indian Standards located in Tamil Nadu.
Dehradun: Branch Office of Bureau of Indian Standards located in Uttrakhand.
Faridabad: Branch Office of Bureau of Indian Standards located in Haryana.
Ghaziabad: Branch Office of Bureau of Indian Standards located in Uttar Pradesh.
Guwahati: Branch Office of Bureau of Indian Standards located in Assam.
Hyderabad: Branch Office of Bureau of Indian Standards located in Telangana.
Jaipur: Branch Office of Bureau of Indian Standards located in Rajasthan.
Jammu: Branch Office of Bureau of Indian Standards located in Jammu and Kashmir.
Jamshedpur: Branch Office of Bureau of Indian Standards located in Jharkhand.
Lucknow: Branch Office of Bureau of Indian Standards located in Uttar Pradesh.
Nagpur: Branch Office of Bureau of Indian Standards located in Maharashtra.
Patna: Branch Office of Bureau of Indian Standards located in Bihar.
Pune: Branch Office of Bureau of Indian Standards located in Maharashtra.
Raipur: Branch Office of Bureau of Indian Standards located in Chattisgarh.
Rajkot: Branch Office of Bureau of Indian Standards located in Gujrat.
Kochi: Branch Office of Bureau of Indian Standards located in Kerala.
Vishakhapatanam: Branch Office of Bureau of Indian Standards located in Andra Pradesh.
Rajeev Sharma: Scientist F DDG StandardizationI
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
ससीी..जजीी..--डडीी..एएलल..--अअ..--2299009922002222--223399222266
xxxGIDHxxx
CCGG--DDLL--EE--2299009922002222--223399222266
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 475] नई ददल्ली, बृहस्ट्प जत ार, जसतम्ब र 29, 2022/आज न 7, 1944
No. 475] NEW DELHI, THURSDAY, SEPTEMBER 29, 2022/ASVINA 7, 1944
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेज भाग)
अजधसचू ना
नई ददल्ली, 27 जसतम्बर, 2022
सदं भ:भ HQ-PUB014/1/2020-PUB-BIS (409).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण में भारतीय मानक ब्यूरो एतदद्व् ारा अजधसूजचत करता है इसमें संलग्न अनूसूची में ददये गये मानकों में
संिोधन दकये गये ह।ैं
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, र् भ सिं ोधनों की सख्ं या सिं ोधनों की जतजथ िब तक मानक
स.ं तथा िीर्कभ ए ं जतजथ प्रजतस्ट्थापन जतजथ तीसरे स्ट्तभं म ेंइंजगत
सिं ोधन के जबना भी
लाग ूरहगे ा
(1) (2) (3) (4) (5)
1 आई एस 1729 : 2002 संिोधन संख्या 8 24 जसतम्बर 2022 23 ददसम्बर 2022
िमीन के ऊपर दबा रजहत नाले की जसतम्बर 2022
पाइप लाइनों के जलए ढल ााँ लोह/े लन्द
लोह े की पाइप ए ं दिटिंग ेंसॉकेिं ए ं
स्ट्पाइगिं श्रेणी
(दसू रा पनु रीक्षण)
6540 GI/2022 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
इन मानकों म ें संिोधनों की प्रजतयााँ भारतीय मानक ब्यरू ो, मानक भ न, 9 बहादरु िाह ज़िर माग,भ नई ददल्ली 110 002,
क्षेत्रीय कायाभलयों : कोलकाता, चंडीगढ़, चेन्नई, मुम्बई तथा िाखा कायाभलयों : अहमदाबाद, बेंगलरुु , भोपाल, भुबनेश्वर,
कोयम्बिंूर, देहरादनू , िरीदाबाद, गाजज़याबाद, गु ाहािंी, हदै राबाद, ियपुर, िम् म,ू िमिेदपरु , लखनऊ, नागपरु , पर ान,ू
पिंना, पुण,े रायपुर, रािकोिं, कोजि, ज िाखापिंनम में जबक्री हते ु उप्लब्ध ह ैं । भारतीय मानकों में संिोधनों को
http://www.standardsbis.in पर आनलाईन खरीदा/ डाउनलोड दकया िा सकता ह ै ।
रािी िमाभ, ैज्ञाजनक एि ए ंउपमहाजनदेिक (मानकीकरण–I)
[ज ज्ञापन-III/4/असा./296/2022-23]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 27th September, 2022
Ref: HQ-PUB014/1/2020-PUB-BIS (409).—In pursuance of Sub-rule (1) of Rule (15) of the
Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments
to Indian standards, particulars of which are given in schedule hereto annexed have been established.
SCHEDULE
Sl. No., Year & Title of the Indian No. and Month/ Date of Date till which the
No. Standard Year of the Establishment of standard without
Amendment the Amendment the amendment as
mentioned in
column 3 shall
remain in force
(1) (2) (3) (4) (5)
1 IS 1729 : 2002 Amendment No. 8 24 Sept 2022 23 Dec 2022
Cast Iron/Ductile Iron Drainage Sept 2022
Pipes and Pipe Fittings for Over
Ground Non-Pressure Pipeline
Socket and Spigot Series
(Second Revision)
Copies of these amendments to standards are available for sale with Bureau of Indian Standards, Manak
Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi – 110 002; Regional Offices : Kolkata, Chandigarh,
Chennai, Mumbai and Branch Offices : Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore,
Dehradun, Faridabad, Ghaziabad, Guwahati, Hyderabad, Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur,
Parwanoo, Patna, Pune, Raipur, Rajkot, Kochi, Vishakhapatanam. Online purchase/downloading of
amendments to Indian Standards can be made at http://www.standardsbis.in.
RAJEEV SHARMA, Scientist F & DDG (Standardization−I)
[ADVT.-III/4/Exty./296/2022-23][भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
अजधसचू ना
नई ददल्ली, 28 जसतम्बर, 2022
सदं भ:भ HQ-PUB014/1/2020-PUB-BIS (410).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण में भारतीय मानक ब्यूरो एतदद्व् ारा अजधसूजचत करता है इसमें संलग्न अनूसूची में ददये गये मानकों में
संिोधन दकये गये ह ैं।
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, सिं ोधनों की सख्ं या सिं ोधनों की जतजथ िब तक मानक
स.ं र् भतथा िीर्कभ ए ं जतजथ प्रजतस्ट्थापन जतजथ तीसरे स्ट्तभं म ेंइंजगत
सिं ोधन के जबना भी
लाग ूरहगे ा
(1) (2) (3) (4) (5)
1 आई एस 1656 : 2022 संिोधन संख्या 1 28 जसतम्बर 2022 27 माच भ 2023
जििु आहार ─ दग्ु ध-अनाि आधाररत जसतम्बर 2022
अनुपूरक आहार ─ ज जिजि
(पांच ा पुनरीक्षण)
2 आई एस 11536 : 2022 संिोधन संख्या 1 28 जसतम्बर 2022 27 माच भ 2023
प्रसंस्ट्कृत-अनाि आधाररत अनपु रू क जसतम्बर 2022
आहार ─ ज जिजि
(तीसरा पनु रीक्षण)
3 आई एस 14433 : 2022 संिोधन संख्या 1 28 जसतम्बर 2022 27 माच भ 2023
जििु दग्ु ध ज कल्प ─ ज जिजि जसतम्बर 2022
(दसू रा पनु रीक्षण)
4 आई एस 15757 : 2022 संिोधन संख्या 1 28 जसतम्बर 2022 27 माच भ 2023
जििु आहार ─ अनुसररत िामलूभ ा ─ जसतम्बर 2022
ज जिजि
(पहला पुनरीक्षण)
इन मानकों में संिोधनों की प्रजतयााँ भारतीय मानक ब्यूरो, मानक भ न, 9 बहादरु िाह ज़िर माग,भ नई ददल्ली 110
002, क्षेत्रीय कायाभलयों : कोलकाता, चंडीगढ़, चेन्नई, मुम्बई तथा िाखा कायाभलयों : अहमदाबाद, बेंगलरुु , भोपाल,
भुबनेश्वर, कोयम्बिंूर, देहरादनू , िरीदाबाद, गाजज़याबाद, ग ु ाहािंी, हदै राबाद, ियपुर, िम् मू, िमिेदपुर, लखनऊ,
नागपुर, पर ान,ू पिंना, पुण,े रायपुर, रािकोिं, कोजि, ज िाखापिंनम में जबक्री हते ु उप्लब्ध ह.ैं भारतीय मानकों में
संिोधनों को http://www.standardsbis.in पर आनलाईन खरीदा/ डाउनलोड दकया िा सकता ह ै।
रािी िमाभ, ैज्ञाजनक एि ए ंउपमहाजनदेिक (मानकीकरण– I)
[ज ज्ञापन-III/4/असा./296/2022-23]4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
NOTIFICATION
New Delhi, the 28th September, 2022
Ref: HQ-PUB014/1/2020-PUB-BIS (410).—In pursuance of Sub-rule (1) of Rule (15) of the
Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments
to Indian standards, particulars of which are given in schedule hereto annexed have been established.
SCHEDULE
Sl. No., Year & Title of the Indian No. and Date of Date till which the
No. Standard Month/Year of the Establishment of standard without
Amendment the Amendment the amendment as
mentioned in
column 3 shall
remain in force
(1) (2) (3) (4) (5)
1 IS 1656 : 2022 Amendment No. 1 28 Sept 2022 27 March 2023
Infant Food ─ Milk-Cereal Sept 2022
Based Complimentary Foods ─
Specification
(Fifth Revision)
2 IS 11536 : 2022 Amendment No. 1 28 Sept 2022 27 March 2023
Processed-Cereal Based Sept 2022
Complimentary Foods ─
Specification
(Third Revision)
3 IS 14433 : 2022 Amendment No. 1 28 Sept 2022 27 March 2023
Infant Milk Substitutes ─ Sept 2022
Specification
(Second revision)
4 IS 15757 : 2022 Amendment No. 1 28 Sept 2022 27 March 2023
Infant Food ─ Follow-Up Sept 2022
Formula ─ Specification
(First Revision)
Copies of these amendments to standards are available for sale with Bureau of Indian Standards, Manak
Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi – 110 002; Regional Offices : Kolkata, Chandigarh,
Chennai, Mumbai and Branch Offices : Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore,
Dehradun, Faridabad, Ghaziabad, Guwahati, Hyderabad, Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur,
Parwanoo, Patna, Pune, Raipur, Rajkot, Kochi, Vishakhapatanam. Online purchase/downloading of
amendments to Indian Standards can be made at http://www.standardsbis.in.
RAJEEV SHARMA, Scientist F & DDG (Standardization−I)
[ADVT.-III/4/Exty./296/2022-23][भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
अजधसचू ना
नई ददल्ली, 27 जसतम्बर, 2022
सदं भ:भ HQ-PUB015/1/2020-PUB-BIS (411).—भारतीय मानक ब्यरू ो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण में भारतीय मानक ब्यूरो एतदद्व् ारा अजधसूजचत करता है इसमें संलग्न अनूसूची में ददये गये मानकों में
संिोधन दकये गये ह ैं।
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, र् भ सिं ोधनों की सख्ं या सिं ोधनों की जतजथ िब तक मानक
स.ं तथा िीर्कभ ए ं जतजथ प्रजतस्ट्थापन जतजथ तीसरे स्ट्तभं म ेंइंजगत
सिं ोधन के जबना भी
लाग ूरहगे ा
(1) (2) (3) (4) (5)
1 आई एस 4727 : 2020 संिोधन संख्या 1 24 जसतम्बर 2022 23 अक्िंूबर 2022
स्त्रादद ─ ैमाजनकी प्रयोिनो के जलय े जसतम्बर 2022
नाईलॉन ेबबग ─ ज जिजि
(पहला पुनरीक्षण)
2 आई एस 9833 : 2018 संिोधन संख्या 1 24 जसतम्बर 2022 23 अक्िंूबर 2022
खाद्य सामग्री और और्जधयों के सम्पकभ में जसतम्बर 2022
आने ाले प्लाजस्ट्िंक्स में इस्ट्तेमाल होन े
ाले कलरंरस की जनश्चय सूची
(दसू रा पनु रीक्षण)
3 आई एस 17525 : 2021 संिोधन संख्या 1 24 जसतम्बर 2022 23 अक्िंूबर 2022
बुलेिं प्रजतरोजधत मोचाभ की ज जिजि जसतम्बर 2022
इन मानकों में संिोधनों की प्रजतयााँ भारतीय मानक ब्यूरो, मानक भ न, 9 बहादरु िाह ज़िर माग,भ नई ददल्ली 110002,
क्षेत्रीय कायाभलयों : कोलकाता, चंडीगढ़, चेन्नई, मुम्बई तथा िाखा कायाभलयों : अहमदाबाद, बेंगलरुु , भोपाल, भुबनेश्वर,
कोयम्बिंूर, देहरादनू , िरीदाबाद, गाजज़याबाद, गु ाहािंी, हदै राबाद, ियपुर, िम् म,ू िमिेदपरु , लखनऊ, नागपरु , पर ान,ू
पिंना, पुण,े रायपुर, रािकोिं, कोजि, ज िाखापिंनम में जबक्री हते ु उप्लब्ध ह.ैं भारतीय मानकों में संिोधनों को
http://www.standardsbis.in पर आनलाईन खरीदा/डाउनलोड दकया िा सकता ह ै ।
रािी िमाभ, ैज्ञाजनक एि ए ंउपमहाजनदेिक (मानकीकरण–I)
[ज ज्ञापन-III/4/असा./296/2022-23]6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
NOTIFICATION
New Delhi, the 27th September, 2022
Ref: HQ-PUB015/1/2020-PUB-BIS (411).—In pursuance of Sub-rule (1) of Rule (15) of the
Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments
to Indian standards, particulars of which are given in schedule hereto annexed have been established.
SCHEDULE
Sl. No., Year & Title of the Indian No. and Date of Date till which the
No. Standard Month/Year of Establishment standard without the
the Amendment of the amendment as
Amendment mentioned in column 3
shall remain in force
(1) (2) (3) (4) (5)
1 IS 4727 : 2020 Amendment No. 1 24 Sept 2022 23 Oct 2022
Textiles ─ Nylon Webbing for Sept 2022
Aeronautical Purposes ─
Specification
(First Revision)
2 IS 9833 : 2018 Amendment No. 1 24 Sept 2022 23 Oct 2022
List of Colourants for Use in Sept 2022
Plastics in Contact with
Foodstuffs and Pharmaceuticals
(Second Revision)
3 IS 17525 : 2021 Amendment No. 1 24 Sept 2022 23 Oct 2022
Specification for Bullet Sept 2022
Resistant Morcha
Copies of these amendments to standards are available for sale with Bureau of Indian Standards, Manak
Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi – 110 002; Regional Offices : Kolkata, Chandigarh,
Chennai, Mumbai and Branch Offices : Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore,
Dehradun, Faridabad, Ghaziabad, Guwahati, Hyderabad, Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur,
Parwanoo, Patna, Pune, Raipur, Rajkot, Kochi, Vishakhapatanam. Online purchase/downloading of
amendments to Indian Standards can be made at http://www.standardsbis.in.
RAJEEV SHARMA, Scientist F & DDG (Standardization−I)
[ADVT.-III/4/Exty./296/2022-23]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.