Okay, I will analyze the provided government policy text and generate the requested report.
**Report: Analysis of Bureau of Indian Standards Notification Regarding Withdrawal of Indian Standards**
**1. Executive Summary:**
This report analyzes a notification from the Bureau of Indian Standards (BIS) regarding the withdrawal of several Indian Standards. The core purpose of this notification is to inform stakeholders that specific standards related to various technologies and testing procedures are being withdrawn, effective May 14, 2025. Key findings indicate that the withdrawn standards cover a wide range of areas, including radio frequency cables, power systems, television transmissions, data interchange on flexible disks, and electromechanical components.
**2. Introduction:**
The purpose of this report is to provide an informative overview of a notification issued by the Bureau of Indian Standards (BIS) concerning the withdrawal of several Indian Standards. This analysis is based solely on the text provided in the notification.
**3. Policy Overview:**
* This document constitutes an amendment to the Bureau of Indian Standards Rules, 2018, specifically regarding the withdrawal of certain Indian Standards.
* **Core Objective:** The core objective, as inferred from the text, is to formally notify stakeholders of the withdrawal of specific Indian Standards, thereby rendering them no longer applicable. This likely aims to streamline standards, potentially reflecting technological advancements or the adoption of newer standards.
**4. Background and Rationale:**
This document reports on the amendment to the Bureau of Indian Standards Rules, 2018. The withdrawal of standards suggests a periodic review and updating of standards by the BIS. The likely reasons include:
* **Obsolescence:** The withdrawn standards may be outdated due to technological advancements.
* **Redundancy:** The withdrawn standards may be replaced by newer or more comprehensive standards.
* **Lack of Relevance:** The withdrawn standards may no longer be relevant to current industry practices.
**5. Key Provisions / Changes:**
This notification details *changes* to existing standards. Specifically, it lists Indian Standards that are being *withdrawn*.
* **Specific Change:** The specific change is the *cancellation* and *withdrawal* of the standards listed in the schedule. This is affecting the industries that previously used these standards.
* **New Rule/Provision:** The *new* provision is that the listed Indian Standards "have been cancelled and stands withdrawn from the date indicated against it." That date is specified as May 14, 2025, for all the listed standards.
* **Difference/Effect:** The *difference* is that the listed standards are no longer valid. The *effect* is that manufacturers and other stakeholders should not rely on these withdrawn standards for compliance purposes after the withdrawal date. They should refer to newer or alternative standards for their activities. This may require affected industries to adapt their processes and products to meet current industry standards.
**6. Target Audience and Stakeholders:**
Based on the titles of the withdrawn standards, the target audience and stakeholders include:
* Manufacturers of radio frequency cables.
* Operators of AC power systems.
* Manufacturers of television receivers and transmission equipment.
* Companies involved in data interchange on flexible disks.
* Manufacturers of electromechanical components for electronic equipment.
* Manufacturers of television signal boosters.
* Manufacturers and installers of video surveillance systems.
* Testing and certification bodies.
**7. Implementation Aspects (Inferred):**
* **Responsible Agency:** The Bureau of Indian Standards (BIS) is the responsible agency, as indicated by the notification.
* **Timelines:** The implementation timeline is clear: the standards are withdrawn on May 14, 2025.
* **Specific to the Amendments:** The implementation of the amendment requires the BIS to ensure that the withdrawn standards are removed from their official documentation and that stakeholders are aware of the change. It also implies that the BIS will likely promote or enforce compliance with any replacement standards, if applicable.
**8. Expected Outcomes / Impact of Changes:**
The likely intended outcomes *of these specific changes* introduced by the amendment text are:
* **Compliance with updated standards:** Affected industries will need to adapt to new or revised standards, potentially requiring changes to manufacturing processes, product design, and testing procedures.
* **Elimination of outdated practices:** The withdrawal of outdated standards encourages the adoption of more current and relevant practices.
* **Clarity and consistency:** By removing outdated standards, the BIS aims to provide greater clarity and consistency in the application of standards within the relevant industries.
**9. Conclusion:**
The Bureau of Indian Standards notification regarding the withdrawal of several Indian Standards is a significant update. The withdrawal of these standards necessitates that affected industries review their practices and ensure compliance with current and applicable standards. This action is likely part of the BIS's ongoing efforts to maintain relevant, up-to-date standards that reflect technological advancements and industry best practices.
Key Entities Referenced
D. L.3300499: Registration number.
NEW DELHI: Location of publication.
FRIDAY, MAY 23, 2025: Date of publication.
JYAISTHA 2, 1947: Date according to the Indian national calendar.
HQPUB01712020PUBBIS 1241: Reference number.
THE GAZETTE OF INDIA: Title of the publication.
Bureau of Indian Standards: Organization responsible for setting Indian standards.
Department of Consumer Affairs: Government department overseeing the Bureau of Indian Standards.
New Delhi: Location of the notification.
19th May, 2025: Date of the notification.
Bureau of Indian Standards Rules, 2018: Rules governing the Bureau of Indian Standards.
Indian Standards: Standards set by the Bureau of Indian Standards.
IS 5026: Indian Standard for General Requirements and Tests for Radio Frequency Cables.
IS 8793: Indian Standard for Line Traps for AC Power Systems Methods of Tests.
IS 10662: Indian Standard for Receivers for Colour Television Broadcast Transmissions Specification.
IS 11453: Indian Standard for Characteristics of Systems for Monochrome and Colour Television
IS 11853 Part 3: Indian Standard for Specification for Data Interchange on 130 mm, Double Sided, 3.8 tpmm, Flexible Disk Cartridge Using Modified Frequency Recording Part 3 Track Format B
IS 11975: Indian Standard for Methods of Measurements for MultiChannel Television Tuners
IS 12327 Part 3: Indian Standard for Specification for Data Interchange on 130 mm Double Sided 3.8 tpmm High Density Flexible Disk Cartridge Using Modified Frequency Modulation Recording at 13 262 ftprad Part 3 Track Format B For 80 Tracks
ISO 86303: International standard referenced within IS 12327
IS 12448 Part 2Sec 1: Indian Standard for Basic Testing Procedures and Measuring Methods for Electrotechnical Components for Electronic Equipment Part 2 General Examination, Electrical Continuity and Contact Resistance Tests, Insulation Tests and Voltage Stress Tests Section 1 General Examination
IS 12448 Part 5Sec 1: Indian Standard for Basic Testing Procedures and Measuring Methods for Electromechanical Components for Electronic Equipment Part 5 Impact Tests Free Components, Static Load Tests Fixed Components, Endurance Tests and Overload Tests Section 1 Impact Tests Free Components
IS 12448 Part 5Sec 2: Indian Standard for Basic Testing Procedure and Measuring Methods for Electromechanical Components for Electronic Equipment Part 5 Impact Tests Free Components, Static Load Tests Fixed Components, Endurance Tests and Overload Tests Section 2 Static Load Tests Fixed Components
IS 12448 Part 5Sec 3: Indian Standard for Basic Testing Procedures and Measuring Methods for Electromechanical Components for Electronic Equipment Part 5 Impact Tests Free Components, Static Load Tests Fixed Components, Endurance Tests and Overload Tests Section 3 Endurance Tests
IS 12448 Part 5Sec 4: Indian Standard for Basic Testing Procedures and Measuring Methods for Electromechanical Components for Electronic Equipment Part 5 Impact Tests Free Components, Static Load Tests Fixed Components, Endurance Tests and Overload Tests Section 4 Overload Tests
IS 12448 Part 9: Indian Standard for Basic Testing Procedures and Measuring Methods for Electromechanical Components for Electronic Equipment Part 9 CableClamping Tests, Explosion Hazard Tests, Chemical Resistance Tests, Fire Hazard Tests, R.F. Resistance Tests, Capacitance Tests, Shielding and Filtering Tests and Magnetic Interference Tests
IS 12922 Part 1: Indian Standard for Specification for 90 mm Flexible Disk Cartridge Using Modified Frequency Recording at 7 958 ftprad on 80 Tracks on Each Side Part 1 Dimensional, Physical and Magnetic Characteristics
ISO 88601: International standard referenced within IS 12922
IS 12922 Part 2: Indian Standard for Specification for 90 mm Flexible Disk Cartridge Using Modified Frequency Recording at 7 958 ftprad on 80 Tracks on Each Side Part 2 Track Format
ISO 88602: International standard referenced within IS 12922
IS 12997 Part 1: Indian Standard for Television Signal Booster Specification Part 1 Wide Band, VHF Range
IS 16910 Part 2Sec 2: Indian Standard for Video Surveillance Systems for Use in Security Applications Part 2 Video Transmission Protocols Section 2 IP Interoperability Implementation Based on HTTP and REST Services
IEC 6267622: International standard referenced within IS 16910
CHITRA GUPTA: Name of the Scientist G DDG Hallmarking and Training
Government of India Press, Ring Road, Mayapuri, New Delhi110064: Name and address of the printing press
Controller of Publications, Delhi110054: Name and address of the publisher
14 May 2025: Date of Withdrawal for a number of Indian Standards mentioned in the schedule.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-24052025-263367
xxxGIDHxxx
CG-DL-E-24052025-263367
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण्ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 388] नई दिल्ली, िक्रु िार, मई 23, 2025/ज्य ेष्ठ 2, 1947
No. 388] NEW DELHI, FRIDAY, MAY 23, 2025/JYAISTHA 2, 1947
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेजिभाग)
अजधसचू ना
नई दिल्ली, 19 मई, 2025
सिं भ:भ HQ-PUB017/1/2020-PUB-BIS (1241).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वाराअजधसूजचत करता ह ै की जिन भारतीय मानको का जििरण
इसके साथ सलं ग्र अनूसूची म े दिया गया ह,ै उन्ह ें कॉलम तीन में इंजगत तारीख को रद्द कर दिया या और िाजपस ल े जलया
गया ह।ै
3390 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
अनसु चू ी
क्रम िाजपस जलए गए भारतीय मानकों की सख्ं या, िर् भतथा िीर्कभ िाजपस जलए िान े
स.ं की तारीख
(1) (2) (3)
आई एस 5026 – 1987 14 मई 2025
1 रेजडयो आिृजि केबल के जलए सामान्य अपेक्षाएँ और परीक्षण
(पहला पुनरीक्षण)
आई एस 8793 : 1995 14 मई 2025
2 ए सी पॉिर प्रणाजलयों के जलय ेलाइन रैप — परीक्षण जिजधयाँ
(पहला पुनरीक्षण)
आई एस 10662 : 1992 14 मई 2025
3 रंगीन िरू ििभन प्रसारण संचार के जलए ररसीिरों की जिजिजि
(पहला पुनरीक्षण)
आई एस 11453 – 1985 14 मई 2025
4 मोनोक्रोम और रंगीन टेलीजििन के जलए प्रणाजलयों की जििेर्ताएँ
आई एस 11853 (भाग 3) – 1986 14 मई 2025
5 130 जममी, डुअल साइडेड, 3.8 tpmm, फ्लेजक्सबल जडस्ट्क कार्ट्रभि पर डेटा इंटरचेंि का
संिोजधत फ्रीक्वेंसी ररकॉर्डिंग के जलए जिजिजि
भाग 3 रैक फॉमेट बी
आई एस 11975 : 1987 14 मई 2025
6 मल्टी-चैनल टेलीजििन ट्यूनसभ के जलए माप की पद्धजतया ँ
आई एस 12327 (भाग 3) : 1989 14 मई 2025
7 आई एस ओ 8630-3 : 1987
130 जममी िोहरी पक्षीय 3.8 tpmm उच्च घनत्ि लचीली जडस्ट्क कारतूस पर डेटा जिजनमय
के जलए जिजिजि, 13 262 ftprad पर 3 आिृजि संिोधन ररकॉर्डिंग का उपयोग करते हुए
(भाग 3 रैक प्रारूप B 80 रैक्स के जलए)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
आई एस 12448 (भाग 2/अनभु ाग 1) – 1988 14 मई 2025
8 इलेक्रॉजनक उपकरणों के जलए इलेक्रोतकनीकी घटकों के जलए बुजनयािी परीक्षण प्रदक्रयाए ँ
और माप पद्धजतया ँ
भाग 2 सामान्य परीक्षण, जिद्युत जनरंतरता और संपकभ प्रजतरोध परीक्षण, रोधन परीक्षण
और िोल्टता तनाि परीक्षण
अनुभाग 1 सामान्य परीक्षण
आई एस 12448 (भाग 5/अनभु ाग 1) : 1989 14 मई 2025
9 इलेक्रानी उपस्ट्कर के जिद्युतयाजं त्रक घटकों की आधारभूत परीक्षण प्रदक्रयाए ंऔर मापन
पद्धजतयां
भाग 5 संघट्ट परीक्षण ( मुक्त घटक ) स्ट्थैजतक भार परीक्षण ( जस्ट्थर घटक ) सहयता परीक्षण
और अजधभार परीक्षण
अनुभाग 1 संघट्ट परीक्षण ( मक्तु घटक )
आई एस 12448 (भाग 5/अनभु ाग 2) : 1989 14 मई 2025
10 इलेक्रानी उपस्ट्कर के जिद्युत यांजत्रक घटकों की आधारभूत परीक्षण प्रदक्रयाए ंऔर मापन
पद्धजतयां
भाग 5 संघट्ट परीक्षण ( मुक्त घटक ), स्ट्थैजतक भार परीक्षण ( जस्ट्थर घटक ), सह्यता परीक्षण
और अजधभार परीक्षण
अनुभाग 2 स्ट्थैजतक भार परीक्षण ( जस्ट्थर घटक )
आई एस 12448 (भाग 5/अनभु ाग 3) : 1989 14 मई 2025
11 इलेक्रानी उपस्ट्कर के जिद्युत यांजत्रक घटकों की आधारभूत परीक्षण प्रदक्रयाए ंऔर मापन
पद्धजतयां
भाग 5 संघट्ट परीक्षण ( मुक्त घटक ), स्ट्थैजतक भार परीक्षण ( जस्ट्थर घटक ), सह्यता परीक्षण
और अजधभार परीक्षण
अनभु ाग 3 सह्यता परीक्षण
आई एस 12448 (भाग 5/अनभु ाग 4) : 1989 14 मई 2025
12 इलेक्रानी उपस्ट्कर के जिद्युतयाजं त्रक घटकों की आधारभूत परीक्षण प्रदक्रयाए ँऔर मापन
पद्धजतयां
भाग 5 संघट्ट परीक्षण ( मुक्त घटक ), स्ट्थैजतक भार परीक्षण ( जस्ट्थर घटक ), सहायता
परीक्षण और अजधभार परीक्षण
अनुभाग 4 अजधभार परीक्षण4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
आई एस 12448 (भाग 9) : 1992 14 मई 2025
13 इलैक्रॉजनक उपस्ट्कर के जलय ेजिद्युत यांजत्रक संघटकों की मूल परीक्षण कायभजिजधयां और
मापन पद्धजतयां
भाग 9 केबल-जसरंि परीक्षण, जिस्ट्फोट िोजखम परीक्षण, रासायजनक प्रजतरोध परीक्षण,
अजि िोजखम परीक्षण, रेजडयो आकृजत प्रजतरोध परीक्षण, संधाररता परीक्षण, जिलल्डंग और
छानन परीक्षण और चुम्बकीय व्यजतकरण परीक्षण
आई एस 12922 (भाग 1) : 1989 14 मई 2025
14 आई एस ओ 8860-1 : 1987
90 जममी लचील ेजडस्ट्क कार्ट्रभि के जलए जिजिजि जिसमें प्रत्येक पक्ष पर 80 रैक पर 7 958
फीट प्रजत रेजडयन की आिृजि ररकॉर्डिंग का उपयोग करना
भाग 1 आयाम, भौजतक और चम्ु बकीय जििेर्ताएँ
आई एस 12922 (भाग 2) : 1989 14 मई 2025
15 आई एस ओ 8860-2 : 1987
90 जममी लचील ेजडस्ट्क कार्ट्रभि के जलए जिजिजि
7 958 फीट प्रजत सेकंड पर संिोजधत आिृजि ररकॉर्डगिं का उपयोग करके
प्रत्येक तरफ 80 रैक
भाग 2 रैक प्रारूप
आई एस 12997 (भाग 1) : 1989 14 मई 2025
16 टेलीजिज़न जसिल बूस्ट्टर — जिजिजि
भाग 1 व्यापक बैंड, िीएचएफ रेंि
आई एस 16910 (भाग 2/अनभु ाग 2) : 2018 14 मई 2025
17 आई ई सी 62676-2-2 : 2013
िीजडयो जनगरानी प्रणाली के जलए सुरक्षा अनुप्रयोगों म ें प्रयोग
भाग 2 िीजडयो पारेर्ण प्रोटोकॉल
अनुभाग 2 आईपी अतं भकायभकारी कायाभन्ियन पर आधाररत एचटीटीपी और आरईएसटी
सेिाए ं
जचत्रा गुप् ता, िैज्ञाजनक िी एि ंउप महाजनिेिक (हॉलमार्किंग एि ं रेलनंग)
[जिज्ञापन-III/4/असा./121/2025-26][भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 19th May, 2025
Ref: HQ-PUB017/1/2020-PUB-BIS (1241).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that the Indian standards, particulars of
which are given in schedule hereto annexed have been cancelled and stands withdrawn from the date indicated against
it in the third column.
SCHEDULE
Sl. No., Year & Title of the Indian Standard Withdrawn Date of Withdrawal
No.
(1) (2) (3)
14 May 2025
1 IS 5026 – 1987
General Requirements and Tests for Radio
Frequency Cables
(First Revision)
14 May 2025
2 IS 8793 : 1995
Line Traps for Ac Power Systems — Methods of Tests
(First Revision)
14 May 2025
3 IS 10662 : 1992
Receivers for Colour Television Broadcast
Transmissions — Specification
(First Revision)
14 May 2025
4 IS 11453 – 1985
Characteristics of Systems for Monochrome and Colour Television
14 May 2025
5 IS 11853 (Part 3) – 1986
Specification for Data Interchange on 130 mm, Double Sided, 3.8 tpmm, Flexible
Disk Cartridge Using Modified Frequency Recording
Part 3 Track Format B
14 May 2025
6 IS 11975 – 1987
Methods of Measurements for Multi-Channel Television Tuners
14 May 2025
7 IS 12327 (Part 3) : 1989
ISO 8630-3 : 1987
Specification for Data Interchange on 130 mm Double Sided 3.8 tpmm High
Density Flexible Disk Cartridge Using Modified Frequency Modulation Recording
at 13 262 ftprad
(Part 3 Track Format B For 80 Tracks)
14 May 2025
8 IS 12448 (Part 2/Sec 1) – 1988
Basic Testing Procedures and Measuring Methods for Electrotechnical Components
for Electronic Equipment6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Sl. No., Year & Title of the Indian Standard Withdrawn Date of Withdrawal
No.
(1) (2) (3)
Part 2 General Examination, Electrical Continuity and Contact Resistance Tests,
Insulation Tests and Voltage Stress Tests
Section 1 General Examination
14 May 2025
9 IS 12448 (Part 5/Sec 1) : 1989
Basic Testing Procedures and Measuring Methods for Electromechanical
Components for Electronic Equipment
Part 5 Impact Tests (Free Components), Static Load Tests (Fixed Components),
Endurance Tests and Overload Tests
Section 1 Impact Tests (Free Components)
14 May 2025
10 IS 12448 (Part 5/Sec 2) : 1989
Basic Testing Procedure and Measuring Methods for Electromechanical
Components for Electronic Equipment
Part 5 Impact Tests (Free Components), Static Load Tests (Fixed Components),
Endurance Tests and Overload Tests
Section 2 Static Load Tests (Fixed Components)
14 May 2025
11 IS 12448 (Part 5/Sec 3) : 1989
Basic Testing Procedures and Measuring Methods for Electromechanical
Components for Electronic Equipment
Part 5 Impact Tests (Free Components), Static Load Tests (Fixed Components),
Endurance Tests and Overload Tests
Section 3 Endurance Tests
14 May 2025
12 IS 12448 (Part 5/Sec 4) : 1989
Basic Testing Procedures and Measuring Methods for Electromechanical
Components for Electronic Equipment
Part 5 Impact Tests (Free Components), Static Load Tests (Fixed Components),
Endurance Tests and Overload Tests
Section 4 Overload Tests
14 May 2025
13 IS 12448 (Part 9) : 1992
Basic Testing Procedures and Measuring Methods for Electromechanical
Components for Electronic Equipment
Part 9 Cable-Clamping Tests, Explosion Hazard Tests,
Chemical Resistance Tests, Fire Hazard Tests, R.F. Resistance
Tests, Capacitance Tests, Shielding and Filtering Tests and
Magnetic Interference Tests
14 May 2025
14 IS 12922 (Part 1) : 1989
ISO 8860-1 : 1987
Specification for 90 mm Flexible Disk Cartridge Using Modified Frequency
Recording at 7 958 ftprad on 80 Tracks on Each Side
Part 1 Dimensional, Physical and Magnetic Characteristics[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 7
Sl. No., Year & Title of the Indian Standard Withdrawn Date of Withdrawal
No.
(1) (2) (3)
14 May 2025
15 IS 12922 (Part 2) : 1989
ISO 8860-2 : 1987
Specification for 90 mm Flexible Disk Cartridge Using Modified Frequency
Recording at 7 958 ftprad on 80 Tracks on Each Side
Part 2 Track Format
14 May 2025
16 IS 12997 (Part 1) : 1989
Television Signal Booster — Specification
Part 1 Wide Band, VHF Range
14 May 2025
17 IS 16910 (Part 2/Sec 2) : 2018
IEC 62676-2-2 : 2013
Video Surveillance Systems for Use in
Security Applications
Part 2 Video Transmission Protocols
Section 2 IP Interoperability Implementation Based on HTTP and REST Services
CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training)
[ADVT.-III/4/Exty./121/2025-26]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.