The gazette notification issued by the Bureau of Indian Standards (BIS) announces the establishment of revised Indian Standards for specific materials and products, replacing older versions. These standards are crucial for ensuring quality, safety, and efficiency in various engineering and industrial applications.
Key Changes
IS 1285:2023 replaces IS 1285:2002 for wrought aluminium and aluminium alloys extruded round tubes and hollow sections for general engineering purposes. The 2023 version is the fourth revision, while the 2002 version was the third revision. Both standards will remain in force concurrently until December 19, 2023.
IS 1536:2023 replaces IS 1536:2001 for centrifugally cast (spun) iron pressure pipes for water, gas, and sewage. The 2023 version is the fifth revision, while the 2001 version was the fourth revision. Both standards will remain in force concurrently until December 19, 2023.
IS 9997:2023 replaces IS 9997:1991 for aluminium alloy redraw rods for electrical purposes. The 2023 version is the second revision, while the 1991 version was the first revision. Both standards will remain in force concurrently until December 19, 2023.
All the new standards were established on June 19, 2023, and the older standards will be withdrawn on December 19, 2023.
Impact Analysis
Manufacturers and Suppliers
Action Items: Review current manufacturing processes, update quality control procedures, train staff on the new standards, and obtain necessary certifications to demonstrate compliance.
Engineers and Designers
Action Items: Familiarize themselves with the revised standards, update design software and manuals, and ensure that all new projects adhere to the latest requirements.
Procurement Agencies (Government and Private)
Action Items: Revise procurement policies, update tender documents, and communicate the new standards to suppliers and contractors.
Consumers
Action Items: Be aware of the updated standards and look for products that comply with them.
Bureau of Indian Standards (BIS)
Action Items: Conduct awareness programs, provide training to manufacturers and other stakeholders, and monitor compliance with the new standards.
Key Entities Referenced
Bureau of Indian Standards (BIS): The national standards body of India responsible for formulating, implementing, and promoting standards for various products and services.
IS 1285:2023: Indian Standard for Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes — Specification (Fourth Revision).
IS 1536:2023: Indian Standard for Centrifugally Cast (Spun) Iron Pressure Pipes for Water, Gas and Sewage — Specification (Fifth Revision).
IS 9997:2023: Indian Standard for Aluminium Alloy Redraw Rods for Electrical Purposes — Specification (Second Revision).
IS 1285:2002: Indian Standard for Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes — Specification (Third Revision) - To be withdrawn on December 19, 2023.
IS 1536:2001: Indian Standard for Centrifugally Cast (Spun) Iron Pressure Pipes for Water, Gas and Sewage — Specification (Fourth Revision) - To be withdrawn on December 19, 2023.
IS 9997:1991: Indian Standard for Aluminium Alloy Redraw Rods for Electrical Purposes — Specification (First Revision) - To be withdrawn on December 19, 2023.
Bureau of Indian Standards Rules, 2018: The rules governing the operations and functions of the Bureau of Indian Standards.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-22062023-246738
xxxGIDHxxx
CG-DL-E-22062023-246738
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 433] नई दिल्ली, बुधिार, िनू 21, 2023/ज्य ष्े ठ 31, 1945
No. 433] NEW DELHI, WEDNESDAY, JUNE 21, 2023/JYAISHTHA 31, 1945
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेजिभाग)
अजधसचू ना
नई दिल्ली, 20 िून, 2023
सिं भ:भ HQ-PUB012/1/2020-PUB-BIS (627) .—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1)
के अनुसरण में भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण इसमें संलग्न अनूसूची के
जद्वतीय स्ट्तंभ में दिये गय ेह,ैं तीसरे स्ट्तंभ में इंजगत जतजि को स्ट्िाजपत हो गय ेह|ैं चौिे स्ट्तंभ में दिये गये मानकों के जििरण, यदि कोई हो
तो ि ेभी साि-साि लाग ूरहेंग ेिब तक ि ेपााँचिें स्ट्तंभ में इंजगत जतजि को िापस जलए िाने ह|ैं
अनसु चू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस जलए िापस होन ेंकी
स.ं जतजि
तिा िीर्कभ िान ेह,ैं की सख्ं या, िर् भतिा िीर्कभ
(1) (2) (3) (4) (5)
1 आई एस 1285 : 2023 19 िून 2023 आई एस 1285 : 2002 19 दिसम्बर
सामान्य इंिीजनयररंग अनुप्रयोगों हते ु सामान्य इंिीजनयररंग अनुप्रयोगों हते ु 2023
जपटिााँ एल्यूजमजनयम एिं एल्यूजमजनयम जपटिां ऐल्यूजमजनयम एि ं
जमश्र धातुओं से बनी एक्सटूडेड गोल ऐल्यूजमजनयम जमश्र धातओंु से बनी
3960 GI/2023 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
नजलयााँ एि ंखोखल ेसेक्िन —जिजिजि एक्सटूडेड गोल नजलयााँ एिं खोखल े
सेक्िन —जिजिजि
(चौिा पुनरीक्षण)
(तीसरा पुनरीक्षण)
2 आई एस 1536 : 2023 19 िून 2023 आई एस 1536 : 2001 19 दिसम्बर
िल, गैस एि ंमल िल के जलए अपकेन्री िल, गैस एि ंमल िल के जलए 2023
ढलिां (स्ट्पण) लोह ेके िाब पाइप — अपकेन्री ढलिां (स्ट्पण) लोह ेके िाब
जिजिजि पाइप — जिजिजि
(पााँचिां पुनरीक्षण) (चौिा पुनरीक्षण)
3 आई एस 9997 : 2023 19 िून 2023 आई एस 9997 : 1991 19 दिसम्बर
जिद्युत कायों के जलए एल्युमीजनयम जमश्र जिद्युत-कायों के जलए ऐल्युमीजनयम 2023
धातु पुनः छड़ों की — जिजिजि जमश्र धातु पुनःकर्भण छड़ों की जिजिजि
(पहला पुनरीक्षण)
(िसू रा पुनरीक्षण)
पी. रािेि, िैज्ञाजनक एफ एि ंउप महाजनिेिक (आई टी एस, पी आर टी , टी एन एम)
[जिज्ञापन-III/4/असा./214/2023-24]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 20th June, 2023
Ref: HQ-PUB012/1/2020-PUB-BIS (627).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be withdrawal
withdrawn, if any
(1) (2) (3) (4) (5)
1 IS 1285 : 2023 19 June 2023 IS 1285 : 2002 19 December
Wrought Aluminium and Aluminium Wrought Aluminium and 2023
Alloys — Extruded Round Tube and Aluminium Alloys — Extruded
Hollow Sections for General Round Tube and Hollow
Engineering Purposes — Sections for General
Specification Engineering Purposes —
(Fourth Revision) Specification
(Third Revision)
2 IS 1536 : 2023 19 June 2023 IS 1536 : 2001 19 December
Centrifugally Cast (Spun) Iron Centrifugally Cast (Spun) Iron 2023
Pressure Pipes for Water, Gas and Pressure Pipes for Water, Gas
Sewage — Specification and Sewage — Specification
(Fifth Revision) (Fourth Revision)
3 IS 9997 : 2023 19 June 2023 IS 9997 : 1991 19 December
Aluminium Alloy Redraw Rods for Aluminium Alloy Redraw Rods 2023
Electrical Purposes — Specification for Electrical Purposes —
(Second Revision) Specification
(First Revision)
P. RAJESH, Scientist F & DDG (ITS, PRT & TNM)
[ADVT.-III/4/Exty./214/2023-24]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.