In pursuance of Subrule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards

## Policy Analysis Report: Notification Regarding Indian Standards (April 11, 2022) **1. Executive Summary:** This report analyzes a notification issued by the Bureau of Indian Standards (BIS) on April 11, 2022, regarding the establishment, revision, and withdrawal of several Indian Standards. This notification effectively amends existing standards related to textile machinery, textile materials, and compostable plastics by establishing new standards and concurrently maintaining older versions until their withdrawal on May 7, 2022. The key finding is the simultaneous enforcement of old and new standards for a defined period, potentially allowing industries to transition to the updated specifications. **2. Introduction:** This report aims to provide a detailed overview of a notification published by the Bureau of Indian Standards (BIS) on April 11, 2022. This analysis is based solely on the provided text of the notification, focusing on the standards that are being established, revised, and withdrawn. The intention is to inform stakeholders about the changes and their potential implications. **3. Policy Overview:** * **Amendment:** This notification functions as an amendment to existing Indian Standards. * **Core Objective(s):** The core objectives, as inferred from the text, are to update and revise existing Indian Standards related to various materials and machinery (textiles, compostable plastics), ensuring they align with current best practices or technological advancements. A secondary objective seems to be providing a transition period during which both old and new standards are simultaneously valid. **4. Background and Rationale:** This is an amendment. The likely rationale for these specific amendments is to improve existing standards based on new information, technology, or industry needs. The concurrent enforcement suggests a need to allow industry participants time to adjust their processes and comply with the updated standards, avoiding immediate disruption. This could involve consuming existing inventories of compliant material or recalibrating machines. **5. Key Provisions / Changes:** This is an Amendment. The key changes introduced by this notification are the establishment of new versions of several Indian Standards, accompanied by the simultaneous enforcement of the older versions until a specific withdrawal date. The key changes are summarized in the table below: | Sl. No. | New Standard | Old Standard | Subject Area | Change | Effect of Change | |---------|-----------------------|-----------------------|-------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------| | 1 | IS 3199 : 2022 | IS 3199 : 1965 | Textile Machinery & Accessories | Definition of Side Left or Right of Weaving Preparatory Machines and Weaving Looms. First Revision | Updates terminology/definitions. Companies using older standards will need to update processes and documentation to be compliant. | | 2 | IS 3683 : 2022 | IS 3683 : 1987 | Textile Machinery & Accessories | Specification for Drop Wires for Warp Stop Motions. Third Revision | Likely updates specifications related to Drop Wires. Older inventories can be used. Compliance with new standards may require updated machinery. | | 3 | IS 4420 : 2022 | IS 4420 : 1967 | Methods for Determination of Conductivity of Aqueous and Organic Extracts of Textile Materials | First Revision | Updates the method of determination of conductivity. Labs/testing facilities will need to update testing procedures and equipment to ensure compliance. | | 4 | IS 11059 : 2022 | IS 11059 : 1984 | Textile Machinery & Accessories | Specification for Cylindrical Tubes for Open-End Spinning. First Revision | Likely updates specifications related to Cylindrical Tubes. Compliance may require updated machinery or changes to existing machinery. | | 5 | ISISO 17088 : 2021 | ISISO 17088 : 2012 | Compostable Plastics | Specification for Compostable Plastics. Second Revision | Updates the specification for compostable plastics. Manufacturers will need to ensure their products meet updated composition or testing requirements. | | 6 | IS 17261 : 2022 | IS 17261 : 2019 | Textiles Polyester Continuous Filament Fully Drawn Yarns | Specification for Textiles Polyester Continuous Filament Fully Drawn Yarns. First Revision | Updates the specification for polyester yarns. Producers need to adjust product and testing. | | 7 | IS 17263 : 2022 | IS 17263 : 2019 | Textiles Polyester Staples Fibres | Specification for Textiles Polyester Staples Fibres. First Revision | Updates the specification for polyester fibers. Producers need to adjust product and testing. | | 8 | IS 17265 : 2022 | IS 17265 : 2019 | Textiles 100 Percent Polyester Spun Grey and White Yarns | Specification for Textiles 100 Percent Polyester Spun Grey and White Yarns. First Revision | Updates the specification for polyester yarns. Producers need to adjust product and testing. | | 9 | IS 17879 : 2022 | NA | Textiles Polyester Textured Yarns | Specification for Textiles Polyester Textured Yarns | Defines the standard for these yarns. Producers can begin manufacturing to new specification | These changes are effective April 8, 2022, with the older standards being withdrawn on May 7, 2022. **6. Target Audience and Stakeholders:** Based on the provided text, the target audience and stakeholders directly affected by these changes include: * Manufacturers of textile machinery and accessories. * Manufacturers and suppliers of textile materials (yarns, fibers). * Manufacturers of compostable plastics. * Testing laboratories and certification bodies involved in assessing compliance with Indian Standards in these sectors. * End-users of the materials specified in the notification. **7. Implementation Aspects (Inferred):** * **Responsible agency/bodies:** The Bureau of Indian Standards (BIS) is the responsible body for implementing and enforcing these standards. * **Timelines or procedures:** The notification establishes a clear timeline: the new standards are effective from April 8, 2022, and the older standards will be withdrawn on May 7, 2022. This implies that organizations have approximately one month to transition to the new standards. It also implies a possible need to provide evidence of compliance. **8. Expected Outcomes / Impact of Changes:** The likely intended outcomes of these amendments are: * Improved quality and performance of textile machinery, materials, and compostable plastics. * Enhanced standardization and harmonization within the respective industries. * Increased consumer confidence in products meeting the updated Indian Standards. * Facilitation of trade and commerce by aligning Indian Standards with international best practices (in the case of compostable plastics). The specific effect of these changes is that textile industries and compostable plastic manufacturing companies must adjust their materials, machinery, and processes to adhere to new rules, or risk not adhering to the standards. **9. Conclusion:** The BIS notification of April 11, 2022, represents a significant update to Indian Standards for textile machinery, textile materials, and compostable plastics. The establishment of new standards, coupled with a transition period during which older versions remain in force, aims to facilitate a smooth adoption of updated specifications within the affected industries. Compliance with these revised standards is crucial for manufacturers to maintain product quality, market competitiveness, and regulatory adherence. The concurrent enforcement period will allow for the transition and minimization of disruption.

Key Entities Referenced