Date: 2025-08-05Category: Extra OrdinaryState: Union GovernmentCountry: India
In pursuance of Subrule (1) of Rule (15) of the Bureau of Indian Standards Rules 2018 the Bureau of Indian Standards hereby notifies that Indian standards
Executive Summary:
This notification from the Bureau of Indian Standards announces the establishment and revision of several Indian Standards, as per Rule 15 of the Bureau of Indian Standards Rules, 2018. The established standards are listed in the schedule, and some will concurrently remain in force until withdrawn on January 24, 2026. The notification is effective from July 29, 2025.
Key Points / Main Content:
* **Establishment of Indian Standards:**
* New Indian Standards have been established as listed in the attached schedule.
* The date of establishment for these standards is July 24, 2025.
* **Concurrent Standards and Withdrawal:**
* Certain existing standards will remain in force concurrently with the newly established standards.
* These concurrent standards will be withdrawn on January 24, 2026.
* **Specific Standards and Revisions:**
* The schedule provides details of specific standards, their titles, and revision numbers.
* Examples include revisions to standards for galvanizing of iron and steel (IS 2629), needle roller bearings (IS 4216), phthalic anhydride (IS 5158), and others.
Impact Analysis:
* **Bureau of Indian Standards (BIS):**
* Impact: Responsible for implementing and enforcing the updated standards.
* Action Required: Ensure compliance with the established and revised standards; monitor and enforce the withdrawal of concurrent standards on the specified date.
* **Manufacturers and Industries:**
* Impact: Must adhere to the new and revised Indian Standards in their production processes.
* Action Required: Review current practices and products to ensure compliance with the updated standards; implement necessary changes to meet the new requirements.
* **Consumers:**
* Impact: Benefit from products that meet updated safety and quality standards.
* Action Required: Be aware of the updated standards when purchasing products.
Key Entities Referenced
Bureau of Indian Standards: A national standards body of India responsible for standardization, marking and quality certification of goods.
Department of Consumer Affairs: A department under the Ministry of Consumer Affairs, Food and Public Distribution in India.
New Delhi: The capital of India, where the notification was issued.
Bureau of Indian Standards Rules, 2018: A set of rules governing the operations of the Bureau of Indian Standards.
IS 2629: Indian Standard for Process, Design, Testing and Recommended Practice for Hot Dip Application of Galvanizing of Iron and Steel
IS 4216: Indian Standard for Cages for Needle Roller Bearings Specification for Needle Cages
IS 5158: Indian Standard for Phthalic Anhydride, Technical Specification for Phthalic Anhydride, Technical
ISO 3861: International Organization for Standardization standard for Rubber hoses for sand and grit blasting
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
ससीी..जजीी..--डडीी..एएलल..--अअ..--0088008822002255--226655229933
xxxGIDHxxx
CCGG--DDLL--EE--0088008822002255--226655229933
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 536] नई दिल्ली, मगं लिार, अगस्ट्त 5, 2025/श्रािण 14, 1947
No. 536] NEW DELHI, TUESDAY, AUGUST 5, 2025/SHRAVANA 14, 1947
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेजिभाग)
अजधसचू ना
नई दिल्ली, 29 िुलाई, 2025
सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (1299)—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1)
के अनुसरण में भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण इसमें संलग्न अनूसूची के
जद्वतीय स्ट्तंभ में दिये गये ह,ैं तीसरे स्ट्तंभ में इंजगत जतजि को स्ट्िाजपत हो गये हैं| चौिे स्ट्तंभ में दिये गये मानकों के जििरण, यदि कोई हो
तो िे भी साि-साि लागू रहेंगे िब तक िे पााँचिें स्ट्तंभ में इंजगत जतजि को िापस जलए िाने हैं|
अनसु चू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस जलए िापस होन ेकी
स.ं तिा िीर्कभ िान ेह,ैं की सख्ं या, िर् भतिा िीर्कभ जतजि
(1) (2) (3) (4) (5)
1 24 िुलाई 2025
आई एस 2629 (भाग 1) : 2025 आई एस 2629 – 1985 24 िनिरी
2026
लोह ेऔर इस्ट्पात के तप्त जनमज्जी लोह ेऔर इस्ट्पात के तप्त जनमज्जी
िस्ट्तीकरण की प्रदक्रया, जडज़ाइन, परीक्षण िस्ट्तीकरण के जलए अनुिंजसत अभ्यास
5214 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
और अनुप्रयोग — रीजत संजहता (पहला पुनरीक्षण)
भाग 1 खेप प्रदक्रया आई एस 4759 : 1996
(िसू रा पुनरीक्षण) संरक्षात्मक इस्ट्पात तिा अन्य संबद्ध
उत्पािों पर तप्त-जनमजज्जत लेपन —
जिजिजि
(तीसरा पुनरीक्षण)
आई एस 6159 : 1998
िस्ट्तीकरण और धातु फुहारन से पूिभ
सामग्री की जडिाईन और संजिरचन की
अनुसंजित रीजत
(िसू रा पुनरीक्षण)
2 24 िुलाई 2025
आई एस 4216 : 2025 आई एस 4216 – 1981 24 िनिरी
2026
नीडल रोलर जबयररंग्स के जलए पपंिरे — नीडल पपंिरे के जलए जिजिजि
जिजिजि
(पहला पुनरीक्षण)
(िसू रा पुनरीक्षण)
3 24 िुलाई 2025
आई एस 5158 : 2025 आई एस 5158 – 1987 24 िनिरी
2026
िैजलक एनहाइड्राइड, तकनीकी — जिजिजि िैजलक एनहाइड्राइड, तकनीकी के जलए
जिजिजि
(तीसरा पुनरीक्षण)
(िसू रा पुनरीक्षण)
4 24 िुलाई 2025
आई एस 5604 : 2025 आई एस 5604 – 1984 24 िनिरी
2026
हस्ट्तचाजलत सािभभौजमक जगयरलेस खींचने हस्ट्तचाजलत सािभभौजमक जगयरलेस
और उठाने िाली मिीनें — जिजिजि खींचने और उठाने िाली मिीनों के
जलए जिजिजि
(िसू रा पुनरीक्षण)
(पहला पुनरीक्षण)
5 24 िुलाई 2025
आई एस 5894 : 2025 आई एस 5894 : 2018 24 िनिरी
2026
आई एस ओ 3861 : 2021 आई एस ओ 3861 : 2005
बालू और जग्रट जिस्ट्फोटन के जलए रबड़ बालू और जग्रट जिस्ट्फोटन के जलए रबड़
होज़ और होज़ असेम्बली — जिजिजि के होि — जिजिजि
(चौिा पुनरीक्षण) (तीसरा पुनरीक्षण)
6 24 िुलाई 2025
आई एस 6961 : 2025 आई एस 6961 – 1984 24 िनिरी
2026
3-ब्रोमोबेनज़ैन्रोन, तकनीकी — जिजिजि 3-ब्रोमोबेनज़ैन्रोन के जलए जिजिजि
(िसू रा पुनरीक्षण) (पहला पुनरीक्षण)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
7 24 िुलाई 2025
आई एस/आई एस ओ 10218-2 : 2025 आई एस 14530 (भाग 2) : 2019 24 िनिरी
2026
रोबोटटक्स — सुरक्षा अपेक्षाएाँ आई एस ओ 10218-2 : 2011
भाग 2 औद्योजगक रोबोट अनुप्रयोग और रोबोट एिं रोबोटटक उपकरण —
रोबोट प्रकोष्ठ औद्योजगक रोबोटों के जलए सुरक्षा
आिश्यकताएं
भाग 2 रोबोट जसस्ट्टम एिं एकीकरण
(पहला पुनरीक्षण)
8 24 िुलाई 2025 लागू नहीं
आई एस/आई एस ओ 10263-5 : 2009 लागू नहीं
भ-ू संचलन मिीनरी — प्रचालन संिेिन
िातािरण भाग 5 पिंडस्ट्क्रीन जडफ्रोपस्ट्टंग
प्रणाली परीक्षण पद्धजत
9 24 िुलाई 2025
आई एस 10994 (भाग 3) : 2025 आई एस 10994 (भाग 3) – 1984 24 िनिरी
2026
िॉट गन कार्ट्रभि — जिजिजि िॉट गन कार्ट्रभि के जलए जिजिजि
भाग 3 खाली केस भाग 3 खाली केस
(पहला पुनरीक्षण)
10 24 िुलाई 2025
आई एस 12933 (भाग 1) : 2025 आई एस 12933 (भाग 1) : 2003 24 िनिरी
2026
सौर सपाट पटिका संग्राहक — जिजिजि सौर सपाट पटिका संग्राहक —
जिजिजि
भाग 1 अपेक्षाएाँ
भाग 1 अपेक्षाएाँ
(तीसरा पुनरीक्षण)
(िसू रा पुनरीक्षण)
रचना सहगल, िैज्ञाजनक िी एिं उप महाजनिेिक (एम एस सी)
[जिज्ञापन-III/4/असा./269/2025-26]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 29th July, 2025
Ref: HQ-PUB013/1/2020-PUB-BIS (1299)— In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian
Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the
second column of the schedule hereto annexed have been established on the date indicated against it in third column. The
particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are
withdrawn on the date indicated against them in the fifth column.4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
SCHEDULE
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Indian Date of
No. Standards Established Standards to be Withdrawn, if Withdrawal
Establishment
any
(1) (2) (3) (4) (5)
24 July 2025 24 January 2026
1 IS 2629 (Part 1) : 2025 IS 2629 – 1985
Process, Design, Testing and Recommended Practice for Hot- Dip
Application of Hot Dip Galvanizing of Galvanizing of Iron and Steel
Iron and Steel — Code of Practice Part
(First Revision)
1 Batch Process
(Second Revision)
IS 4759 : 1996
Hot-Dip Zinc Coatings on
Structural Steel and Other Allied
Products — Specification
(Third Revision)
IS 6159 : 1998
Recommended Practice for Design
and Fabrication of Iron and Steel
Products Prior to Galvanizing and
Metal Spraying
(Second Revision)
24 July 2025 24 January 2026
2 IS 4216 : 2025 IS 4216 – 1981
Cages for Needle Roller Bearings — Specification for Needle Cages
Specification
(First Revision)
(Second Revision)
24 July 2025 24 January 2026
3 IS 5158 : 2025 IS 5158 – 1987
Phthalic Anhydride, Technical — Specification for Phthalic
Specification Anhydride, Technical
(Third Revision) (Second Revision)
24 July 2025 24 January 2026
4 IS 5604 : 2025 IS 5604 – 1984
Hand-Operated Universal Gearless Specification for Hand-Operated
Pulling and Lifting Machines — Universal Gearless Pulling and
Specification Lifting Machines
(Second Revision) (First Revision)
24 July 2025 24 January 2026
5 IS 5894 : 2025 IS 5894 : 2018
ISO 3861 : 2021 ISO 3861 : 2005
Rubber Hoses and Hose Assemblies for Rubber Hoses for Sand and Grit
Sand and Grit Blasting — Specification Blasting — Specification
(Fourth Revision) (Third Revision)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
24 July 2025 24 January 2026
6 IS 6961 : 2025 IS 6961 – 1984
3-Bromobenzanthrone, Technical — Specification for 3-
Specification Bromobenzanthrone
(Second Revision) (First Revision)
24 July 2025 24 January 2026
7 IS/ISO 10218-2 : 2025 IS 14530 (Part 2) : 2019
Robotics — Safety Requirements ISO 10218-2 : 2011
Part 2 Industrial Robot Applications Robots and Robotic Devices —
and Robot Cells
Safety Requirements for
Industrial Robots
Part 2 Robot Systems and
Integration
(First Revision)
24 July 2025 NA
8 IS/ISO 10263-5 : 2009 NA
Earth-Moving Machinery Operator
Enclosure Environment
Part 5 Windscreen Defrosting System
Test Method
24 July 2025 24 January 2026
9 IS 10994 (Part 3) : 2025 IS 10994 (Part 3) – 1984
Cartridges for Shotguns — Specification for Cartridges for Shot
Specification Guns
Part 3 Empty Case Part 3 Case Empty
(First Revision)
24 July 2025 24 January 2026
10 IS 12933 (Part 1) : 2025 IS 12933 (Part 1) : 2003
Solar Flat Plate Collector — Solar Flat Plate Collector —
Specification Specification
Part 1 Requirements Part 1 Requirements
(Third Revision) (Second Revision)
RACHNA SEHGAL, Scientist G & DDG (MSC)
[ADVT.-III/4/Exty./269/2025-26]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.