## Report on Notification Regarding Indian Standards (September 17, 2021)
**1. Executive Summary:**
This report analyzes a notification issued by the Bureau of Indian Standards (BIS) on September 17, 2021, concerning the establishment and revision of various Indian Standards. The notification, documented under reference number HQPUB01312020PUBBIS220, details the introduction of new standards and the concurrent maintenance (followed by withdrawal) of older versions of these standards. This standardization aims to ensure quality, safety, and interoperability across diverse sectors, from ether specification to shipbuilding and software engineering. The key finding is a coordinated effort to update and harmonize Indian standards with international practices, promoting industry competitiveness and consumer protection.
**2. Introduction:**
This report aims to provide an overview of the BIS notification published on September 17, 2021, regarding the establishment, revision, and withdrawal of Indian Standards. This analysis is based solely on the content of the provided policy text. The purpose of this report is to inform industry about the changes and provide a quick reference guide.
**3. Policy Overview:**
This notification represents an update and revision of existing standards, thus it serves as an **Amendment** to the body of existing Indian Standards. The core objective, inferred from the text, is to update and maintain the relevance and applicability of Indian Standards across a range of industries, potentially to align with current best practices, technological advancements, and international standards. A clear goal is to replace older standards with revised and updated versions.
**4. Background and Rationale:**
This notification updates current standards. The changes are likely made to reflect advancements in technology, address identified shortcomings in previous standards, and align Indian standards with international norms. These amendments aim to improve the quality, safety, and efficiency of products and services covered by these standards. The widespread nature of the updates suggests a proactive effort to maintain the relevance and competitiveness of Indian industries.
**5. Key Provisions / Changes:**
This notification details a series of changes to Indian Standards. It specifies the withdrawal of older standards and the concurrent implementation of new or revised ones. The following table summarizes the key changes. **It is important to note that the specific changes within each standard are *not* detailed in the provided document. The notification *only* states that a new version is established and an old version will be withdrawn.**
| Sl. No. | Standard Being Established (New Version) | Date of Establishment | Standard Being Withdrawn (Old Version) | Date of Withdrawal |
| :------ | :----------------------------------------- | :--------------------- | :------------------------------------- | :------------------- |
| 1 | IS 336 : 2021 | 16 Sept 2021 | IS 336 : 1973 | 15 Oct 2021 |
| 2 | IS 5113 : 2021ISO 3730 : 2012 | 16 Sept 2021 | IS 5113 : 2012ISO 3730 : 1988 | 15 Oct 2021 |
| 4 | ISISO 85282 : 2018 | 16 Sept 2021 | ISISO 85282 : 2005 | 15 Oct 2021 |
| 5 | IS 10318 Part 1 : 2021ISO 56731 : 2005 | 16 Sept 2021 | IS 10318 : 2002ISO 5673 : 1993 | 5 Oct 2021 |
| 8 | IS 11032 : 2021 | 16 Sept 2021 | IS 11032 : 1984 | 15 Oct 2021 |
| 10 | ISISO 118436 : 2019 | 16 Sept 2021 | ISISO 118436 : 2013 | 15 Oct 2021 |
| 11 | IS 12343 : 2021 | 16 Sept 2021 | IS 12343 : 1998 | 15 Oct 2021 |
| 13 | IS 14607 : 2021ISO 8277 : 2013 | 16 Sept 2021 | IS 14607 : 1998ISO 8277 : 1988 | 15 Oct 2021 |
| 14 | ISISO 147082 : 2019 | 16 Sept 2021 | ISISO 147082 : 2012 | 15 Oct 2021 |
| 18 | IS 16446 : 2021ISOIEC 25020 : 2019 | 16 Sept 2021 | IS 16446 : 2016ISOIEC 25020 : 2007 | 15 Oct 2021 |
| 19 | IS 16448 : 2021ISOIEC 25030 : 2019 | 16 Sept 2021 | IS 16448 : 2016ISOIEC 25030 : 2007 | 15 Oct 2021 |
| 21 | IS 17269 : 2021 | 16 Sept 2021 | IS 17269 : 2019 | 15 Oct 2021 |
| 23 | IS 17612 : 2021ISO 5621 : 1984 | 16 Sept 2021 | NA | NA |
|24-30| IS 17615/18 Part 1-6 : 2021 | 16 Sept 2021| NA | NA |
| 31 | IS 17620 : 2021ISO 6666 : 2011 | 16 Sept 2021 | NA | NA |
|32-40| IS 17629-17667 : 2021 | 16 Sept 2021 | NA | NA |
| 34 | IS 17642 : 2021ISO 17828 : 2015 | 16 Sept 2021 | NA | NA |
| 35 | IS 17643 : 2021ISO 17829 : 2015 | 16 Sept 2021 | NA | NA |
The effect of these changes is that stakeholders must adhere to the newly established standards from the establishment date to ensure compliance and maintain product/service quality.
**6. Target Audience and Stakeholders:**
The target audience includes manufacturers, service providers, testing laboratories, certification bodies, and consumers across various industries. Specifically, the stakeholders impacted include:
* Manufacturers of ether, reciprocating internal combustion engines, agricultural tractors, rotary screen type pre-cleaners and other items in the table above.
* Shipbuilding and marine technology companies.
* Medical device manufacturers.
* Software and systems engineering organizations.
* Packaging and transport industries.
* Pashmina product manufacturers.
* Food industries.
* Textile manufacturers.
* Companies using or processing solid biofuels.
* Organizations involved in water quality and reuse.
**7. Implementation Aspects (Inferred):**
* **Responsible Agency/Bodies:** The Bureau of Indian Standards (BIS) is the responsible body for establishing and implementing these standards.
* **Timelines:** The notification specifies two key dates:
* **Date of Establishment:** The date from which the new standard is in effect (September 16, 2021, for most).
* **Date of Withdrawal:** The date on which the older standard will be withdrawn (primarily October 15, 2021).
* **Implementation of Changes:** Affected organizations are expected to transition to the new standards between September 16, 2021 and October 15, 2021.
**8. Expected Outcomes / Impact of Changes:**
The intended outcome of these standards revisions is to:
* Enhance product quality and performance.
* Improve safety standards.
* Promote interoperability and compatibility.
* Facilitate trade and reduce technical barriers.
* Align Indian standards with international best practices.
* Increase industry competitiveness.
The impact of these changes will require affected industries to update their processes, products, and testing procedures to comply with the new standards. This may involve investments in new equipment, training, and certification.
**9. Conclusion:**
The BIS notification of September 17, 2021, signifies a commitment to maintaining relevant and up-to-date standards across various sectors in India. The establishment and revision of these standards aim to enhance product quality, safety, and industry competitiveness. Affected stakeholders must familiarize themselves with the new standards and adapt their practices accordingly to ensure compliance and reap the benefits of these improvements. Further details on each individual standard can be obtained from the BIS.
Key Entities Referenced
NEW DELHI: Capital of India; place of publication of the gazette notification.
Bureau of Indian Standards: Organization responsible for establishing Indian Standards.
Department of Consumer Affairs: The department under which the Bureau of Indian Standards operates.
Bureau of Indian Standards Rules, 2018: Rules governing the operation of the Bureau of Indian Standards.
Indian Standards: Standards established by the Bureau of Indian Standards.
IS 336 : 1973: An Indian Standard specification for Ether, Second Revision.
IS 336 : 2021: An Indian Standard specification for Ether, Third Revision.
IS 5113 : 2012: An Indian Standard for Shipbuilding Mooring Winches, Second Revision
ISO 3730 : 1988: International Standard for Shipbuilding Mooring Winches
IS 5113 : 2021: An Indian Standard for Shipbuilding and Marine Structures Mooring Winches Third Revision, equivalent to ISO 3730 : 2012
Faridabad: Branch Office of Bureau of Indian Standards.
ISO 63601 : 2004: International Standard for Dentistry Number Coding System for Rotary Instruments Part 1 General Characteristics
ISO 85282 : 2005: An International Standard for Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 2 Engines
ISO 85282 : 2018: An International Standard for Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 2 Engines First Revision
IS 10318 : 2002: Indian Standard for Agricultural Tractors and Machinery Power TakeOff Drive Shafts and Power Input Connection First Revision equivalent to ISO 5673 : 1993
ISO 56731 : 2005: International Standard for Agricultural Tractors and Machinery Power TakeOff Drive Shafts and Power Input Connection
IS 10318 Part 1 : 2021: Indian Standard for Agricultural Tractors and Machinery Power TakeOff Drive Shafts and Power Input Connection Part 1 general Manufacturing and Safety Requirements Position of PowerInput Connection Second Revision
ISO 10368 : 2006: International Standard for Freight Thermal Containers Remote Condition Monitoring
ISO 1099314 : 2001: International Standard for Biological Evaluation of Medical Devices Part 14 Identification and Quantification of Degradation Products from Ceramics
IS 11032 : 1984: Indian Standard Specification for Rotary Screen Type PreCleaner First Revision
IS 11032 : 2021: Indian Standard Rotary Screen Type PreCleaner Specification
ISO 11156 : 2011: International Standard for Packaging Accessible Design General Requirements
ISO 118436 : 2013: International Standard for Capability of Detection Part 6 Methodology for the Determination of the Critical Value and the Minimum Detectable Value in Poisson Distributed Measurements by Normal Approximations First Revision
ISO 118436 : 2019: International Standard for Capability of Detection Part 6 Methodology for the Determination of the Critical Value and the Minimum Detectable Value in Poisson Distributed Measurements by Normal Approximations
IS 12343 : 1998: Indian Standard for Agricultural Tractors Operators Seat Technical Requirements First Revision
IS 12343 : 2021: Indian Standard for Agricultural Tractors Operators Seat Technical Requirements Second Revision
ISO 12776 : 2008: International Standard for Pallets Slip Sheets
IS 14607 : 1998: Indian Standard for Shipbuilding Pipework Information Transfer Guidelines, equivalent to ISO 8277 : 1988
ISO 8277 : 2013: International Standard for Ships and Marine Technology Pipework and Machinery Information Transfer
IS 14607 : 2021: Indian Standard for Ships and Marine Technology Pipework and Machinery Information Transfer Shipbuilding Pipework First Revision
ISO 147082 : 2012: International Standard for Implants for Surgery Active Implantable Medical Devices Part 2 Cardiac Pacemakers First Revision
ISO 147082 : 2019: International Standard for Implants for Surgery Active Implantable Medical Devices Part 2 Cardiac Pacemakers
ISISOTR 15069 : 2018: International Standard for Series 1 Freight Containers Handling and Securing Rationale for ISO 3874 : 2017, Annexes A To E
ISO 16103 : 2005: International Standard for Packaging Transport Packaging for Dangerous Goods Recycled Plastics Material
ISO 16106 : 2020: International Standard for Transport Packages for Dangerous Goods Dangerous Goods Packagings, Intermediate Bulk Containers IBCs and Large Packagings Guidelines for the Application of ISO 9001
IS 16446 : 2016: Indian Standard for Systems and Software Engineering Software Product Quality Quality Measurement Framework Requirements and Evaluation SQuaRE Measurement Reference Model and Guide, equivalent to ISOIEC 25020 : 2007
IS 16446 : 2021: Indian Standard for Systems and Software Engineering Quality Software Engineering Requirements and Evaluation SQuaRE Software Product Quality Quality Measurement Framework Requirements and First Revision, equivalent to ISOIEC 25020 : 2019
IS 16448 : 2016: Indian Standard for Systems and Software Engineering Software Product Quality Quality Requirements Framework Requirements and Evaluation Square Quality Requirements, equivalent to ISOIEC 25030 : 2007
IS 16448 : 2021: Indian Standard for Systems and Software Engineering Quality Software Engineering Requirements and Evaluation SQuaRE Software Product Quality Quality Requirements Framework Requirements and First Revision equivalent to ISOIEC 25030 : 2019
ISO 16495 : 2013: International Standard for Packaging Transport Packaging for Dangerous Goods Test Methods
IS 17269 : 2019: Indian Standard for Identification, Labelling and Marking of Pashmina Products First Revision
IS 17269 : 2021: Indian Standard for Identification, Labelling and Marking of Pashmina Products
Ghaziabad: Branch Office of Bureau of Indian Standards.
ISO 17480 : 2015: International Standard for Packaging Accessible Design Ease of Opening
IS 17612 : 2021: Indian Standard for Shipbuilding Bilge Mud Boxes for Machinery Spaces and Tunnels General Design Characteristics equivalent to ISO 5621 : 1984
IS 17615 Part 1 : 2021: Indian Standard for Measurement of Ride Quality Part 1 Lifts Elevators, equivalent to ISO 187381 : 2012
ISO 5621 : 1984: International Standard for Shipbuilding Bilge Mud Boxes for Machinery Spaces and Tunnels General Design Characteristics
ISO 187381 : 2012: International Standard for Measurement of Ride Quality Part 1 Lifts Elevators
IS 17618 Part 1 : 2021: Indian Standard for Tasar Raw Silk Grading and Test Methods Part 1 GradingClassification
IS 17618 Part 2 : 2021: Indian Standard for Tasar Raw Silk Grading and Methods of Tests Part 2 Visual and Tactual Examination
IS 17618 Part 3 : 2021: Indian Standard for Tasar Raw Silk Grading and Methods of Tests Part 3 Winding Test
IS 17618 Part 4 : 2021: Indian Standard for Tasar Raw Silk Grading and Methods of Tests Part 4 Size Test
IS 17618 Part 5 : 2021: Indian Standard for Tasar Raw Silk Grading and Methods of Tests Part 5 Tenacity and Elongation Test
IS 17618 Part 6 : 2021: Indian Standard for Tasar Raw Silk Grading and Methods of Tests Part 6 Cohesion Test
IS 17620 : 2021: Indian Standard for Coffee Sampling Triers for Green Coffee or Raw Coffee and Parchment Coffee, equivalent to ISO 6666 : 2011
ISO 6666 : 2011: International Standard for Coffee Sampling Triers for Green Coffee or Raw Coffee and Parchment Coffee
IS 17629 : 2021: Indian Standard for Medical Textiles Caps Specification
IS 17630 : 2021: Indian Standard for Medical Textiles Bedsheet and Pillow Cover Specification
IS 17642 : 2021: Indian Standard for Solid Biofuels Determination of Bulk Density, equivalent to ISO 17828 : 2015
ISO 17828 : 2015: International Standard for Solid Biofuels Determination of Bulk Density
IS 17643 : 2021: Indian Standard for Solid Biofuels Determination of Length and Diameter of Pellets, equivalent to ISO 17829 : 2015
ISO 17829 : 2015: International Standard for Solid Biofuels Determination of Length and Diameter of Pellets
IS 17651 : 2021: Indian Standard for Soy Nuts Specification
IS 17652 : 2021: Indian Standard for Soy Butter Specification
IS 17662 : 2021: Indian Standard for Guidelines for Water Quality Grade Classification for Water Reuse, equivalent to ISO 20469 : 2018
ISO 20469 : 2018: International Standard for Guidelines for Water Quality Grade Classification for Water Reuse
IS 17663 : 2021: Indian Standard for Water Reuse in Urban Areas Guidelines for Water Reuse Safety Evaluation Assessment Parameters and Methods, equivalent to ISO 20761 : 2018
ISO 20761 : 2018: International Standard for Water Reuse in Urban Areas Guidelines for Water Reuse Safety Evaluation Assessment Parameters and Methods
IS 17667 : 2021: Indian Standard for Vegetable Fats and Oils Determination of Phospholipids Content in Lecithins by HPLC Using a LightScattering Detector, equivalent to ISO 11701 : 2009
ISO 11701 : 2009: International Standard for Vegetable Fats and Oils Determination of Phospholipids Content in Lecithins by HPLC Using a LightScattering Detector
Manak Bhavan: Address of Bureau of Indian Standards in New Delhi.
Bahadur Shah Zafar Marg: Address of Bureau of Indian Standards in New Delhi.
Kolkata: Regional Office of Bureau of Indian Standards.
Chandigarh: Regional Office of Bureau of Indian Standards.
Chennai: Regional Office of Bureau of Indian Standards.
Mumbai: Regional Office of Bureau of Indian Standards.
Ahmedabad: Branch Office of Bureau of Indian Standards.
Bengaluru: Branch Office of Bureau of Indian Standards.
Bhopal: Branch Office of Bureau of Indian Standards.
Bhubaneshwar: Branch Office of Bureau of Indian Standards.
Coimbatore: Branch Office of Bureau of Indian Standards.
Dehradun: Branch Office of Bureau of Indian Standards.
Guwahati: Branch Office of Bureau of Indian Standards.
Hyderabad: Branch Office of Bureau of Indian Standards.
Jaipur: Branch Office of Bureau of Indian Standards.
Jammu: Branch Office of Bureau of Indian Standards.
Jamshedpur: Branch Office of Bureau of Indian Standards.
Lucknow: Branch Office of Bureau of Indian Standards.
Nagpur: Branch Office of Bureau of Indian Standards.
Parwanoo: Branch Office of Bureau of Indian Standards.
Patna: Branch Office of Bureau of Indian Standards.
Pune: Branch Office of Bureau of Indian Standards.
Raipur: Branch Office of Bureau of Indian Standards.
Rajkot: Branch Office of Bureau of Indian Standards.
Kochi: Branch Office of Bureau of Indian Standards.
Vishakhapatanam: Branch Office of Bureau of Indian Standards.
J. ROY CHOWDHURY: Scientist G DDG Standardization I
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-21092021-229836
xxxGIDHxxx
CG-DL-E-21092021-229836
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 400] नई दिल्ली, मगं ल ार, जसतम्ब र 21, 2021/भाद्र 30, 1943
No. 400] NEW DELHI, TUESDAY, SEPTEMBER 21, 2021/BHADRA 30, 1943
भारतीय मानक ब्य ूरो
(उपभोक्त ा मामल ेज भाग)
अजधसचू ना
नई दिल्ली, 17 जसतम्बर, 2021
सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (220).— भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1)
के अनुसरण में भारतीय मानक ब्यूरो एतद्द्वारा अजधसूजचत करता है दक जिन भारतीय मानकों के ज रण इसमें संलग्न अनूसूची के जितीय
स्ट्तंभ में दिये गय े ह,ैं तीसरे स्ट्तंभ में इंजगत जतजि को स्ट्िाजपत हो गय े ह|ैं चौिे स्ट्तंभ में दिये गय े मानकों के ज रण, यदि कोई हो तो े
भी साि-साि लाग ूरहेंग ेिब तक ेपााँच ेंस्ट्तंभ में इंजगत जतजि को ापस जलए िाने ह ैं।
अनसु चू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, र् भ प्रजतस्ट्िापन भारतीय मानकों, यदि ापस ापस होन ेंकी जतजि
स.ं जतजि
तिा िीर्भक जलए िान ेह,ैं की सख्ं या, र्भ
तिा िीर्भक
(1) (2) (3) (4) (5)
1 आई एस 336 : 2021 16 जसतम्बर आई एस 336 : 1973 15 अक्टूबर 2021
ईिर ─ ज जिजि 2021 ईिर के जलए ज जिजि
(तीसरा पुनरीक्षण) (िसू रा पुनरीक्षण)
2 आई एस 5113 : 2021/आई एस ओ 3730 16 जसतम्बर आई एस 5113 : 2012/आई 15 अक्टूबर 2021
: 2012 2021 एस ओ 3730 : 1988
5309 GI/2021 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
पोत जनमाभण और समुद्री संरचनाएाँ ─ मूररंग पोत जनमाभण ─ मूररंग ज न्च
व ंच
(िसू रा पुनरीक्षण)
(तीसरा पुनरीक्षण)
3 आई एस/आई एस ओ 6360-1 : 2004 16 जसतम्बर लागू नहीं लागू नहीं
ितं जचदकत्सा ─ रोटरी उपकरणों के जलये 2021
नम्बर कोवडंग प्रणाली
भाग 1 सामान्य ज िेर्ताय ें
4 आई एस/आई एस ओ 8528-2 : 2018 16 जसतम्बर आई एस/आई एस ओ 8528-2 : 15 अक्टूबर 2021
प्रत्यागामी आतंररक िहन इंिन चाजलत 2021 2005
प्रत्या ती धारा िनरेरटंग सेट
प्रत्यागामी आतंररक िहन इंिन
भाग 2 इंिन चाजलत प्रत्या ती धारा
(पहला पुनरीक्षण) िनरेरटंग सेट
भाग 2 इंिन
5 आई एस 10318 (भाग 1) : 2021/आई एस 16 जसतम्बर आई एस 10318 : 2002/आई 15 अक्टूबर 2021
ओ 5673-1 : 2005 2021 एस ओ 5673 : 1993
कृजर् रैक्टर ए ं मिीनरी ─ पा र टेक-ऑफ कृजर् रैक्टर ए ं मिीनरी ─
चालक धुरी और िजि जनज ि (पा र इनपुट) पा र टेक-आफ् चालक धुरी और
संयोिन की अ स्ट्िा िजि जनज जि (पा र इनपुट)
भाग 1 सामान्य उत्पािन ए ं सुरक्षा की संयोिन की जस्ट्िजत
(पहला पुनरीक्षण)
अपेक्षाएाँ
(िसू रा पुनरीक्षण)
6 आई एस/आई एस ओ 10368 : 2006 16 जसतम्बर लागू नहीं लागू नहीं
फ्रेट िमभल कंटेनर ─ िरू स्ट्ि अ स्ट्िा जनगरानी 2021
7 आई एस/आई एस ओ 10993-14 : 2001 16 जसतम्बर लागू नहीं लागू नहीं
जचदकत्सा का िैज क मूल्यांकन उपकरण 2021
भाग 14 चीनी जमट्टी की चीज़ें से जगरा ट
उत्पािों की पहचान और मात्रा का ठहरा
8 आई एस 11032 : 2021 16 जसतम्बर आई एस 11032 : 1984 15 अक्टूबर 2021
रोटरी स्ट्क्रीन प्रकार के प्री-क्लीनर ─ ज जिजि 2021 रोटरी स्ट्क्रीन प्रकार के प्री-
(पहला पुनरीक्षण) क्लीनर के जलए ज जिजि
9 आई एस/आई एस ओ 11156 : 2011 16 जसतम्बर लागू नहीं लागू नहीं
पैकेविंग ─ सुगम जडिाइन ─ सामान्य 2021
आ श्यकताएाँ
10 आई एस/आई एस ओ 11843-6 : 2019 16 जसतम्बर आई एस/आई एस ओ 11843-6 15 अक्टूबर 2021
संसूचन सक्षमता 2021 : 2013
भाग 6 सामान्य अनमु ानों िारा पायसन संसूचन सक्षमता
ज तररत मापो में महत् पूणभ मल्ू य और भाग 6 सामान्य अनमु ानों िारा
न्यूनतम पता लगाने योग्य मूल्य के जनधाभरण
पायसन ज तररत मापों में
के जलए पद्धजत
महत् पूणभ मूल्य और न्यूनतम
(पहला पुनरीक्षण)
पता लगाने योग्य मूल्य के
जनधाभरण के जलए पद्धजत
11 आई एस 12343 : 2021 16 जसतम्बर आई एस 12343 : 1998 15 अक्टूबर 2021
कृजर् रैक्टर ─ प्रचालक सीट ─ तकनीकी 2021 कृजर् रैक्टर ─ प्रचालक सीट ─
अपेक्षाएाँ तकनीकी अपेक्षाएाँ
(िसू रा पुनरीक्षण) (पहला पुनरीक्षण)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
12 आई एस/आई एस ओ 12776 : 2008 16 जसतम्बर लागू नहीं लागू नहीं
पैलेट्स ─ जस्ट्लप िीट 2021
13 आई एस 14607 : 2021/आई एस ओ 16 जसतम्बर आई एस 14607 : 1998/आई 15 अक्टूबर 2021
8277 : 2013 2021 एस ओ 8277 : 1988
िहाि और समुद्री प्रौद्योजगकी ─ पाईपकायभ पोत जनमाभण ─ पाइपकायभ ─
और मिीनरी ─ िानकारी अंतरण सूचना स्ट्िानान्तरण ─ दििा
(पहला पुनरीक्षण) जनििे
14 आई एस/आई एस ओ 14708-2 : 2019 16 जसतम्बर आई एस/आई एस ओ 14708-2 15 अक्टूबर 2021
सिभरी के जलए प्रत्यारोपण ─ सदक्रय 2021 : 2012
प्रत्यारोपण जचदकत्सा उपकरण
सिभरी के जलए प्रत्यारोपण ─
भाग 2 कार्डभयक पेसमेकर सदक्रय प्रत्यारोपण जचदकत्सा
(पहला पुनरीक्षण) उपकरण
भाग 2 कार्डभयक पेसमेकर
15 आई एस/आई एस ओ/टी आर 15069 : 16 जसतम्बर लागू नहीं लागू नहीं
2018 2021
सीरीज़ 1 फ्रेट कंटेनर ─ संभाल और सुरक्षा ─
आईएसओ 3874 : 2017 के जलए उपपजि,
उपबंध ए से ई
16 आई एस/आई एस ओ 16103 : 2005 16 जसतम्बर लागू नहीं लागू नहीं
पैकेविंग ─ खतरनाक सामानों के जलए 2021
परर हन पैकेविंग ─ पुननभ ीनीकरण
प्लाजस्ट्टक सामग्री
17 आई एस/आई एस ओ 16106 : 2020 16 जसतम्बर लागू नहीं लागू नहीं
खतरनाक सामानों के जलए परर हन पैकेि ─ 2021
खतरनाक सामानों, मध्य ती बल्क कंटेनर
और बड़े पैकेविंग के जलए आईएसओ 9001
के प्रयोग हते ु दििाजनििे
18 आई एस 16446 : 2021/आई एस ओ/आई 16 जसतम्बर आई एस 16446 : 2016/आई 15 अक्टूबर 2021
ई सी 25020 : 2019 2021 एस ओ/आई ई सी 25020 :
जसस्ट्टम और सॉफ्ट ेयर अजभयांजत्रकी ─ 2007
जसस्ट्टम और सॉफ्ट ेयर गुण िा हेतु
सॉफ्ट ेयर अजभयांजत्रकी ─
आ श्यकताएाँ ए ंमूल्यांकन (स्ट्क ेयर) ─
सॉफ्ट ेयर उत्पाि की गुण िा
मापन गुण िा ंांचा
हते ु आ श्यकताएाँ ए ंमूल्यांकन
(पहला पुनरीक्षण)
(स्ट्क ेयर) ─ मापन
संिभभगुण िा माडल ए ं
मागभििभक
19 आई एस 16448 : 2021/आई एस ओ/आई 16 जसतम्बर आई एस 16448 : 2016/आई 15 अक्टूबर 2021
ई सी 25030 : 2019 2021 एस ओ/आई ई सी 25030 :
जसस्ट्टम और सॉफ्ट ेयर अजभयांजत्रकी ─ 2007
जसस्ट्टम और सॉफ्ट ेयर गुण िा हेतु
सॉफ्ट ेयर अजभयांजत्रकी ─
आ श्यकताएाँ ए ंमूल्यांकन (स्ट्क ेयर) ─
सॉफ्ट ेयर उत्पाि की गुण िा
गुण िा आ श्यकताओं की रुपरेखा
हते ु आ श्यकताएाँ ए ंमूल्यांकन
(पहला पुनरीक्षण)
(स्ट्क ेयर) ─ गुण िा
आ श्यकताएाँ4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
20 आई एस/आई एस ओ 16495 : 2013 16 जसतम्बर लागू नहीं लागू नहीं
पैकेविंग ─ खतरनाक सामानों के जलए 2021
परर हन पैकेि ─ परीक्षण ज जधयााँ
21 आई एस 17269 : 2021 16 जसतम्बर आई एस 17269 : 2019 15 अक्टूबर 2021
पश्मीना उत्पािों की पहचान, लेबवलंग ए ं 2021 पश्मीना उत्पािों की पहचान,
मोहरांकन लेबवलंग ए ं मोहरांकन
(पहला पुनरीक्षण)
22 आई एस/आई एस ओ 17480 : 2015 16 जसतम्बर लागू नहीं लागू नहीं
पैकेविंग ─ सुगम जडिाइन ─ खोलने की 2021
सुगमता
23 आई एस 17612 : 2021/आई एस ओ 16 जसतम्बर लागू नहीं लागू नहीं
5621 : 1984 2021
पोत जनमाभण ─ मिीनरी अतं राल ए ं सुरंग
के जलए जबल्ि कीच जडब्बा ─ सामान्य
जडज़ाइन की
ज िेर्ताएाँ
24 आई एस 17615 (भाग 1) : 2021/आई एस 16 जसतम्बर लागू नहीं लागू नहीं
ओ 18738-1 : 2012 2021
राइड गुण िा का मापन
भाग 1 जलफ्ट्स (एजल ेटर)
25 आई एस 17618 (भाग 1) : 2021 16 जसतम्बर लागू नहीं लागू नहीं
तसर कच्चा रेिम ─ ग्रेवडंग और परीक्षण 2021
पद्धजतयााँ
भाग 1 ग्रेवडंग/ गीकरण
26 आई एस 17618 (भाग 2) : 2021 16 जसतम्बर लागू नहीं लागू नहीं
तसर कच्चा रेिम ─ ग्रेवडंग और परीक्षण 2021
पद्धजतयााँ
भाग 2 िखे कर और स्ट्पिभ करके िााँच करना
27 आई एस 17618 (भाग 3) : 2021 16 जसतम्बर लागू नहीं लागू नहीं
तसर कच्चा रेिम ─ ग्रेवडंग और परीक्षण 2021
पद्धजतयााँ
भाग 3 लपेटन परीक्षण
28 आई एस 17618 (भाग 4) : 2021 16 जसतम्बर लागू नहीं लागू नहीं
तसर कच्चा रेिम ─ ग्रेवडंग और परीक्षण 2021
पद्धजतयााँ
भाग 4 साइि परीक्षण
29 आई एस 17618 (भाग 5) : 2021 16 जसतम्बर लागू नहीं लागू नहीं
तसर कच्चा रेिम ─ ग्रेवडंग और परीक्षण 2021
पद्धजतयााँ
भाग 5 तन्यता ए ं िीर्घीकरण परीक्षण
30 आई एस 17618 (भाग 6) : 2021 16 जसतम्बर लागू नहीं लागू नहीं
तसर कच्चा रेिम ─ ग्रेवडंग और परीक्षण 2021
पद्धजतयााँ
भाग 6 एकिुटता परीक्षण[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
31 आई एस 17620 : 2021/आई एस ओ 16 जसतम्बर लागू नहीं लागू नहीं
6666 : 2011 2021
कॉफ़ी नमूनाकरण ─ हरी कॉफ़ी उफ़भ कच्ची
कॉफ़ी ए ं पाचभमैंट कॉफ़ी के जलए रॉयस भ
32 आई एस 17629 : 2021 16 जसतम्बर लाग ूनहीं लाग ूनहीं
जचदकत्सीय स्त्रादि ─ कैप ─ ज जिजि 2021
33 आई एस 17630 : 2021 16 जसतम्बर लाग ूनहीं लाग ूनहीं
जचदकत्सीय स्त्रादि ─ चािर और तदकए का 2021
जगलाफ़ ─ ज जिजि
34 आई एस 17642 : 2021/आई एस ओ 16 जसतम्बर लागू नहीं लागू नहीं
17828 : 2015 2021
ठोस िै ईंधन ─ िोक र्घनत् का जनधाभरण
35 आई एस 17643 : 2021/आई एस ओ 16 जसतम्बर लागू नहीं लागू नहीं
17829 : 2015 2021
ठोस िै ईंधन ─ पैलेटस की लम्बाई और
व्यास का जनधाभरण
36 आई एस 17651 : 2021 16 जसतम्बर लाग ूनहीं लाग ूनहीं
सोया नट्स ─ ज जिजि 2021
37 आई एस 17652 : 2021 16 जसतम्बर लाग ूनहीं लाग ूनहीं
सोया मक्खन ─ ज जिजि 2021
38 आई एस 17662 : 2021/आई एस ओ 16 जसतम्बर लाग ूनहीं लाग ूनहीं
20469 : 2018 2021
िल के पनु प्रयभ ोग हते ुिल गणु ता श्रणे ी
गीकरण के मागभििी जसद्धातं
39 आई एस 17663 : 2021/आई एस ओ 16 जसतम्बर लाग ूनहीं लाग ूनहीं
20761 : 2018 2021
िहरी क्षत्रे ों म ेंिल का पनु प्रयभ ोग ─ िल के
पनु प्रयभ ोग के सुरक्षा मल्ू याकं न हते ुमागिभ िी
जसद्धातं ─ मल्ू याकं न मापिडं और ज जधया ाँ
40 आई एस 17667 : 2021/आई एस ओ 16 जसतम्बर लागू नहीं लागू नहीं
11701 : 2009 2021
नस्ट्पजत सा ए ंतेल ─ लाइट स्ट्कैटररंग
जडटेक्टर एच पी एल सी िारा लेजसिींस में
फोस्ट्फोजलजपड्स का जनधाभरण
इन मानकों की प्रजतयााँ भारतीय मानक ब्यूरो, मानक भ न, 9 बहािरु िाह ज़फर मागभ, नई दिल्ली-110002, क्षेत्रीय कायाभलयों:
कोलकाता, चंडीगढ़, चेन्नई, मुम्बई तिा िाखा कायाभलयों : अहमिाबाि, बेंगलुरु, भोपाल, भुबनेश्वर, कोयम्बटूर, िहे रािनू , फरीिाबाि,
गाजज़याबाि, गु ाहाटी, हिै राबाि, ियपुर, िम्मु, िमिेिपुर, लखनऊ, नागपुर, पर ानू, पटना, पुणे, रायपुर, रािकोट, कोजच्च,
ज िाखापटनम में जबक्री हते ु उप्लब्ध हैं। भारतीय मानकों को http://www.standardsbis.in पर आनलाईन खरीिा/ डाउनलोड
दकया िा सकता है ।
िे राय चौधरी, ैज्ञाजनक िी ए ं उपमहाजनििे क (मानकीकरण – I)
[ज ज्ञापन-III/4/असा./263/2021-22]6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 17th September, 2021
Ref: HQ-PUB013/1/2020-PUB-BIS(220).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl. No., Year & Title of the Indian Standards Date of No. , Year & Title of the Date of
No. Established Establishment Indian Standards to be withdrawal
withdrawn, if any
(1) (2) (3) (4) (5)
1 IS 336 : 2021 16 Sept 2021 IS 336 : 1973 15 Oct 2021
Ether ─ Specification Specification for Ether
(Third Revision) (Second Revision)
2 IS 5113 : 2021/ISO 3730 : 2012 16 Sept 2021 IS 5113 : 2012/ISO 3730 : 15 Oct 2021
Shipbuilding and Marine Structures ─ 1988
Mooring Winches Shipbuilding ─ Mooring
(Third Revision) Winches
(Second Revision)
3 IS/ISO 6360-1 : 2004 16 Sept 2021 NA NA
Dentistry ─Number Coding System for
Rotary Instruments
Part 1 General Characteristics
4 IS/ISO 8528-2 : 2018 16 Sept 2021 IS/ISO 8528-2 : 2005 15 Oct 2021
Reciprocating Internal Combustion Engine Reciprocating Internal
Driven Alternating Current Generating Sets Combustion Engine Driven
Part 2 Engines Alternating Current
Generating Sets
(First Revision)
Part 2 Engines
5 IS 10318 (Part 1) : 2021/ISO 5673-1 : 2005 16 Sept 2021 IS 10318 : 2002/ISO 5673 : 5 Oct 2021
Agricultural Tractors and Machinery ─ 1993
Power Take-Off Drive Shafts and Power- Agricultural Tractors and
Input Connection Machinery ─ Power Take-
Part 1 general Manufacturing and Safety Off Drive Shafts and
Requirements Position of Power-Input
Connection
(Second Revision)
(First Revision)
6 IS/ISO 10368 : 2006 16 Sept 2021 NA NA
Freight Thermal Containers ─ Remote
Condition Monitoring
7 IS/ISO 10993-14 : 2001 16 Sept 2021 NA NA
Biological Evaluation of Medical Devices
Part 14 Identification and Quantification of
Degradation Products from Ceramics
8 IS 11032 : 2021 16 Sept 2021 IS 11032 : 1984 15 Oct 2021
Rotary Screen Type Pre-Cleaner ─ Specification for Rotary
Specification Screen Type Pre-Cleaner
(First Revision)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 7
9 IS/ISO 11156 : 2011 16 Sept 2021 NA NA
Packaging ─ Accessible Design ─ General
Requirements
10 IS/ISO 11843-6 : 2019 16 Sept 2021 IS/ISO 11843-6 : 2013 15 Oct 2021
Capability of Detection Capability of Detection
Part 6 Methodology for the Determination Part 6 Methodology for the
of the Critical Value and the Minimum Determination of the Critical
Detectable Value in Poisson Distributed Value and the Minimum
Measurement by Normal Approximations Detectable Value in Poisson
(First Revision) Distributed Measurements
by Normal Approximations
11 IS 12343 : 2021 16 Sept 2021 IS 12343 : 1998 15 Oct 2021
Agricultural Tractors ─ Operator’s Seat ─ Agricultural Tractors ─
Technical Requirements Operator’s Seat ─ Technical
(Second Revision) Requirements
(First Revision)
12 IS/ISO 12776 : 2008 16 Sept 2021 NA NA
Pallets ─ Slip Sheets
13 IS 14607 : 2021/ISO 8277 : 2013 16 Sept 2021 IS 14607 : 1998/ISO 8277 : 15 Oct 2021
Ships and Marine Technology ─ Pipework 1988
and Machinery ─ Information Transfer Shipbuilding ─ Pipework ─
(First Revision) Information Transfer ─
Guidelines
14 IS/ISO 14708-2 : 2019 16 Sept 2021 IS/ISO 14708-2 : 2012 15 Oct 2021
Implants for Surgery ─ Active Implantable Implants for Surgery ─
Medical Devices Active Implantable Medical
Part 2 Cardiac Pacemakers Devices
(First Revision) Part 2 Cardiac Pacemakers
15 IS/ISO/TR 15069 : 2018 16 Sept 2021 NA NA
Series 1 Freight Containers ─ Handling and
Securing ─ Rationale for ISO 3874 : 2017,
Annexes A To E
16 IS/ISO 16103 : 2005 16 Sept 2021 NA NA
Packaging ─ Transport Packaging for
Dangerous Goods ─ Recycled Plastics
Material
17 IS/ISO 16106 : 2020 16 Sept 2021 NA NA
Transport Packages for Dangerous Goods ─
Dangerous Goods Packagings, Intermediate
Bulk Containers (IBCs) and Large
Packagings ─ Guidelines for the
Application of ISO 9001
18 IS 16446 : 2021/ISO/IEC 25020 : 2019 16 Sept 2021 IS 16446 : 2016/ISO/IEC 15 Oct 2021
Systems and Software Engineering ─ 25020 : 2007
Systems and Software Quality Software Engineering ─
Requirements and Evaluation (SQuaRE) ─ Software Product Quality
Quality Measurement Framework Requirements and
(First Revision) Evaluation (SQuaRE) ─
Measurement Reference
Model and Guide8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
19 IS 16448 : 2021/ISO/IEC 25030 : 2019 16 Sept 2021 IS 16448 : 2016/ISO/IEC 15 Oct 2021
Systems and Software Engineering ─ 25030 : 2007
Systems and Software Quality Software Engineering ─
Requirements and Evaluation (SQuaRE) ─ Software Product Quality
Quality Requirements Framework Requirements and
(First Revision) Evaluation (Square) ─
Quality Requirements
20 IS/ISO 16495 : 2013 16 Sept 2021 NA NA
Packaging ─ Transport Packaging for
Dangerous Goods ─ Test Methods
21 IS 17269 : 2021 16 Sept 2021 IS 17269 : 2019 15 Oct 2021
Identification, Labelling and Marking of Identification, Labelling and
Pashmina Products Marking of Pashmina
(First Revision) Products
22 IS/ISO 17480 : 2015 16 Sept 2021 NA NA
Packaging ─ Accessible Design ─ Ease of
Opening
23 IS 17612 : 2021/ISO 5621 : 1984 16 Sept 2021 NA NA
Shipbuilding ─ Bilge Mud Boxes for
Machinery Spaces and Tunnels ─ General
Design Characteristics
24 IS 17615 (Part 1) : 2021/ISO 18738-1 : 16 Sept 2021 NA NA
2012
Measurement of Ride Quality
Part 1 Lifts (Elevators)
25 IS 17618 (Part 1) : 2021 16 Sept 2021 NA NA
Tasar Raw Silk ─ Grading and Test
Methods
Part 1 Grading/Classification
26 IS 17618 (Part 2) : 2021 16 Sept 2021 NA NA
Tasar Raw Silk ─ Grading and Methods of
Tests
Part 2 Visual and Tactual Examination
27 IS 17618 (Part 3) : 2021 16 Sept 2021 NA NA
Tasar Raw Silk ─ Grading and Methods of
Tests
Part 3 Winding Test
28 IS 17618 (Part 4) : 2021 16 Sept 2021 NA NA
Tasar Raw Silk ─ Grading and Methods of
Tests
Part 4 Size Test
29 IS 17618 (Part 5) : 2021 16 Sept 2021 NA NA
Tasar Raw Silk ─ Grading and Methods of
Tests
Part 5 Tenacity and Elongation Test
30 IS 17618 (Part 6) : 2021 16 Sept 2021 NA NA
Tasar Raw Silk ─ Grading and Methods of
Tests
Part 6 Cohesion Test
31 IS 17620 : 2021/ISO 6666 : 2011 16 Sept 2021 NA NA
Coffee Sampling ─ Triers for Green Coffee
or Raw Coffee and Parchment Coffee[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 9
32 IS 17629 : 2021 16 Sept 2021 NA NA
Medical Textiles ─ Caps ─ Specification
33 IS 17630 : 2021 16 Sept 2021 NA NA
Medical Textiles ─ Bedsheet and Pillow
Cover ─ Specification
34 IS 17642 : 2021/ISO 17828 : 2015 16 Sept 2021 NA NA
Solid Biofuels ─ Determination of Bulk
Density
35 IS 17643 : 2021/ISO 17829 : 2015 16 Sept 2021 NA NA
Solid Biofuels ─ Determination of Length
and Diameter of Pellets
36 IS 17651 : 2021 16 Sept 2021 NA NA
Soy Nuts ─ Specification
37 IS 17652 : 2021 16 Sept 2021 NA NA
Soy Butter ─ Specification
38 IS 17662 : 2021/ISO 20469 : 2018 16 Sept 2021 NA NA
Guidelines for Water Quality Grade
Classification for Water Reuse
39 IS 17663 : 2021/ISO 20761 : 2018 16 Sept 2021 NA NA
Water Reuse in Urban Areas ─ Guidelines
for Water Reuse Safety Evaluation ─
Assessment Parameters and Methods
40 IS 17667 : 2021/ISO 11701 : 2009 16 Sept 2021 NA NA
Vegetable Fats and Oils ─ Determination of
Phospholipids Content in Lecithins by
HPLC Using a Light-Scattering Detector
Copies of these standards are available for sale with Bureau of Indian Standards, Manak Bhavan, 9 Bahadur Shah Zafar Marg,
New Delhi–110 002; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and Branch Offices: Ahmedabad, Bengaluru,
Bhopal, Bhubaneshwar, Coimbatore, Dehradun, Faridabad, Ghaziabad, Guwahati, Hyderabad, Jaipur, Jammu, Jamshedpur,
Lucknow, Nagpur, Parwanoo, Patna, Pune, Raipur, Rajkot, Kochi, Vishakhapatanam. Online purchase/downloading of Indian
Standards can be made at http://www.standardsbis.in.
J. ROY CHOWDHURY, Scientist G & DDG (Standardization − I)
[ADVT.-III/4/Exty./263/2021-22]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.