The gazette notification issued by the Bureau of Indian Standards (BIS) announces the establishment of new Indian Standards and the withdrawal of existing standards. This is done in accordance with the Bureau of Indian Standards Rules, 2018.
The notification specifies the updated standards for rubber hoses and hose assemblies used in measured fuel dispensing systems and for oil suction and discharge services.
Key Changes
IS 2396:2023/ISO 5772:2015 (Rubber Hoses and Hose Assemblies for Measured Fuel Dispensing Systems) has been established on February 17, 2023, replacing IS 2396:2017/ISO 5772:1998, which will be withdrawn on March 17, 2023. This is the fifth revision.
IS 8189:2023/ISO 1823:2015 (Rubber Hose and Hose Assemblies for Oil Suction and Discharge Service) has been established on February 17, 2023, replacing IS 8189:1996, which will be withdrawn on March 17, 2023. This is the second revision.
Impact Analysis
Manufacturers of Rubber Hoses and Hose Assemblies
Impact: Potential costs associated with updating equipment, processes, and obtaining new certifications.
Fuel Dispensing System Operators and Oil Industry
Impact: Improved safety and performance of fuel dispensing and oil handling systems due to updated standards.
Consumers
Impact: Increased consumer confidence in the quality and safety of fuel and oil products.
Bureau of Indian Standards (BIS)
Impact: Enhanced credibility and effectiveness of BIS in promoting quality and safety through standardization.
Key Entities Referenced
Bureau of Indian Standards (BIS): The national standards body of India responsible for formulating and promoting standards.
IS 2396:2023/ISO 5772:2015: Indian Standard for Rubber Hoses and Hose Assemblies for Measured Fuel Dispensing Systems (Fifth Revision).
IS 2396:2017/ISO 5772:1998: Previous Indian Standard for Rubber Hoses and Hose Assemblies for Measured Fuel Dispensing Systems (Fourth Revision), to be withdrawn on March 17, 2023.
IS 8189:2023/ISO 1823:2015: Indian Standard for Rubber Hose and Hose Assemblies for Oil Suction and Discharge Service (Second Revision).
IS 8189:1996: Previous Indian Standard for Rubber Hose for On-Shore Oil Suction and Discharge Services (First Revision), to be withdrawn on March 17, 2023.
Bureau of Indian Standards Rules, 2018: The regulatory framework under which BIS operates and establishes standards.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-01032023-244003
xxxGIDHxxx
CG-DL-E-01032023-244003
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 143] नई दिल्ली, मगं लिार, फरिरी 28, 2023/फाल्ग नु 9, 1944
No. 143] NEW DELHI, TUESDAY, FEBRUARY 28, 2023/PHALGUNA 9, 1944
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेजिभाग)
अजधसचू ना
नई दिल्ली, 23 फरिरी, 2023
सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (534).—भारतीय मानक ब्यरू ो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण
इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ में दिये गये हैं, तीसरे स्ट्तभं में इंजगत जतजि को स्ट्िाजपत हो गये ह।ैं चौिे स्ट्तंभ म ें दिय े
गय े मानकों के जििरण, यदि कोई हो तो ि े भी साि-साि लाग ू रहगें े िब तक ि े पााँचि ें स्ट्तंभ में इंजगत जतजि को िापस जलए
िाने ह।ैं
अनसु चू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस िापस होन ेंकी
स.ं िर् भतिा िीर्कभ जलए िान ेह,ैं की सख्ं या, िर् भ जतजि
तिा िीर्कभ
(1) (2) (3) (4) (5)
1 आई एस 2396 : 2023/आई एस ओ 17 फरिरी, 2023 आई एस 2396 : 2017/आई 17 माच,भ 2023
5772 : 2015 एस ओ 5772 : 1998
माजपत ईंधन पररक्षपे क हते ु रबड़ होज़ माजपत ईंधन पररक्षपे क हते ु
और होज़ एसेम्बली — जिजिजि रबड़ हौज़ और हौज़ समुच्चय
1346 GI/2023 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
(पांचिां पुनरीक्षण) — जिजिजि
(चौिा पनु रीक्षण)
2 आई एस 8189 : 2023/आई एस ओ 17 फरिरी, 2023 आई एस 8189 : 1996 17 माच,भ 2023
1823 : 2015 समुद्री अिचूर्ण एिं जनकास
तेल सक्िन और जडस्ट्चािभ सेिा के जलए सेिाओं के जलए तले की रबड़
रबड़ होज़ और होज़ एसेम्बली — नजलयां
जिजिजि (पहला पुनरीक्षण)
(िसू रा पनु रीक्षण)
पी रािेि, िैज्ञाजनक एफ और उपमहाजनिेिक (आई टी एस, पी आर टी , टी एन एम)
[जिज्ञापन-III/4/असा./669/2022-23]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 23rd February, 2023
Ref: HQ-PUB013/1/2020-PUB-BIS (534).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be withdrawal
withdrawn, if any
(1) (2) (3) (4) (5)
1 IS 2396 : 2023/ISO 5772 : 2015 17 Feb, 2023 IS 2396 : 2017/ISO 5772 : 17 March, 2023
Rubber Hoses and Hose Assemblies for 1998
Measured Fuel Dispensing Systems — Rubber Hoses and Hose
Specification Assemblies for Measured
(Fifth Revision) Fuel Dispensing —
Specification
(Fourth Revision)
2 IS 8189 : 2023/ISO 1823 : 2015 17 Feb, 2023 IS 8189 : 1996 17 March, 2023
Rubber Hose and Hose Assemblies for Rubber Hose for On-Shore
Oil Suction and Discharge Service — Oil Suction and Discharge
Specification Services — Specification
(Second revision) (First revision)
P. RAJESH, Scientist F and DDG (ITS, PRT and TNM)
[ADVT.-III/4/Exty./669/2022-23]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.