Home India Bureau of Indian Standards In pursuance of Subrule 1 of Rule 15 of the Bureau of Indian...
Date: 22-May-2023 Category: Extra Ordinary State: Union Government Country: India

In pursuance of Subrule 1 of Rule 15 of the Bureau of Indian Standards Rules,

Issued by Bureau of Indian Standards · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

What it means

  • The gazette notification issued by the Bureau of Indian Standards (BIS) announces the establishment of new Indian standards and the withdrawal/replacement of existing ones. This notification is in pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018.
  • The Indian standards, with their particulars, are listed in the schedule. The schedule specifies the new standard, its establishment date, the standard being replaced (if any), and the withdrawal date of the replaced standard.

Key Changes

  • The notification establishes several new Indian Standards across various categories, including brushes, electric tools, photovoltaic devices, and equipment for explosive atmospheres.
  • A total of 44 standards are listed in the schedule.
  • Many of the new standards are revisions or replacements of older standards. The older standards will be withdrawn on June 18, 2023, or May 18, 2024, depending on the specific standard.
  • For example, IS 487: 2023 (Brushes, Paints and Varnishes) replaces IS 487: 2012 and will be effective from May 18, 2023, with the older standard being withdrawn on June 18, 2023.
  • Similarly, IS/IEC 60079-6: 2016+AMD1 2020 (Explosive Atmospheres) replaces IS/IEC 60079-6: 2015 and will be effective from May 18, 2023, with the older standard being withdrawn on May 18, 2024.
  • Some new standards, especially in the area of photovoltaic devices such as IS 12375 (Part 10) : 2023, IS 12762 (Part 14) : 2023, IS 16170 (Part 4) : 2023, IS 16221 (Part 3) : 2023, IS 16960 (Part 2) : 2023, IS 17841 (Part 4) : 2023, IS 17956 : 2023, IS 17959 : 2023, IS 18124 (Part 1) : 2023, IS 18124 (Part 2) : 2023, IS 18127 : 2023, IS 18128 : 2023, IS 18160 (Part 1) : 2023 and IS 18207 : 2023 do not replace any existing standards.

Impact Analysis

Manufacturers

  • Manufacturers of equipment for explosive environments must adhere to the updated standards to ensure safety and compliance.

Consumers

  • Increased confidence in products bearing the BIS mark due to adherence to the latest standards.

Bureau of Indian Standards (BIS)

  • BIS will need to monitor the market to ensure that manufacturers are complying with the new standards and take enforcement action where necessary.

Government Agencies

  • Enforcement agencies need to be aware of the changes in standards to ensure compliance.

Suggested Action Items

  • Government agencies should update their regulations and procurement processes to reflect the new standards.

Key Entities Referenced

Bureau of Indian Standards (BIS): The national standards body of India responsible for formulating and promoting Indian standards. Indian Standards (IS): Specifications and guidelines established by BIS to ensure quality, safety, and reliability of products and services in India. Bureau of Indian Standards Rules, 2018: The regulatory framework governing the operations and functions of the Bureau of Indian Standards. IEC (International Electrotechnical Commission): An international standards organization that prepares and publishes international standards for all electrical, electronic and related technologies. ISO (International Organization for Standardization): An independent, non-governmental international organization that develops standards to ensure the quality, safety, and efficiency of products, services and systems.
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 सी.जी.-डी.एल.-अ.-23052023-245992 xxxGIDHxxx CG-DL-E-23052023-245992 xxxGIDExxx असाधारण EXTRAORDINARY भाग III—खण् ड 4 PART III—Section 4 प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 335] नई दिल्ली, सोमिार, मई 22, 2023/ज्य ष्े ठ 1, 1945 No. 335] NEW DELHI, MONDAY, MAY 22, 2023/JYAISHTHA 1, 1945 भारतीय मानक ब्य रू ो (उपभोक्त ा मामल ेजिभाग) अजधसचू ना नई दिल्ली, 19 मई, 2023 सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (594).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ म ें दिये गये ह,ैं तीसरे स्ट्तभं में इंजगत जतजि को स्ट्िाजपत हो गये ह ैं । चौि े स्ट्तंभ में दिय े गय े मानकों के जििरण, यदि कोई हो तो ि े भी साि-साि लाग ू रहगें े िब तक ि े पााँचि ें स्ट्तंभ में इंजगत जतजि को िापस जलए िाने ह ैं । अनसु चू ी क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस होन ेकी स.ं जतजि िर् भतिा िीर्कभ िापस जलए िान ेह,ैं की सख्ं या, िर् भतिा िीर्कभ (1) (2) (3) (4) (5) 1 आई एस 487 : 2023 18 मई 2023 आई एस 487 : 2012 18 िून 2023 3237 GI/2023 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] रंग रोगन और िार्नभि के जलए ब्रि — रंग रोगन और िार्नभि के अंडाकार फेरुल कसे हुए, तिा जलए ब्रि — (i) अडं ाकार गोलाकार, फेरूल कसे हुए फेरुल कसे हुए, तिा (ii) (छठा पुनरीक्षण) गोलाकार, फेरूल कसे हुए (पांचिााँ पुनरीक्षण) 2 आई एस 2616 : 2023 18 मई 2023 आई एस 2616 : 1963 18 िून 2023 सफाई टैंक और कमोड/िौचालय के जलए (i) सफाई टैंक, और ब्रि — जिजिजि (ii) (पहला पुनरीक्षण) कमोड/िौचालय के जलए ब्रि की जिजिजि 3 आई एस 2621 : 2023 18 मई 2023 आई एस 2621 : 1976 18 िून 2023 ब्रि, कमोड चुट्स — जिजिजि ब्रि, कमोड चुट्स के जलए (िसू रा पनु रीक्षण) जिजिजि (पहला पुनरीक्षण) 4 आई एस 2622 : 2023 18 मई 2023 आई एस 2622 : 1986 18 िून 2023 ब्रि, बैजनस्ट्टर (हाि स्ट्िीपपंग), पसंगल ब्रि, बैजनस्ट्टर (हाि — जिजिजि स्ट्िीपपंग), पसंगल के जलए (तीसरा पनु रीक्षण) जिजिजि (िसू रा पनु रीक्षण) 5 आई एस 4665 (भाग 1) : 2023/आई 18 मई 2023 आई एस 4665 (भाग 1) 18 िून 2023 ई सी 60745-1 : 2006 : 1984 हस्ट्त-जस्ट्ति िाली मोटर संचाजलत जिद्युत पोटेबल इलेजक्रक मोटर- उपकरण — सरु क्षा संचाजलत उपकरण भाग 1 सामान्य आिश्यकताएं भाग 1 सामान्य (िसू रा पनु रीक्षण) आिश्यकताएाँ और परीक्षण के जलए जिजििता (पहला पुनरीक्षण) 6 आई एस 4665 (भाग 2/अनुभाग 3) : 18 मई 2023 आई एस 4665 (भाग 2) 18 िून 2023 2023/आई ई सी 60745-2-3 : 2006 : 1984 हस्ट्त-जस्ट्ति िाली मोटर-जिद्युत पोटेबल इलेजक्रक मोटर- संचाजलत उपकरण — सुरक्षा संचाजलत उपकरण भाग 2 जििेर् अपेक्षाए ाँ भाग 2 उपकरण के जलए अनुभाग 3 ग्राइंडर, पॉजलिर और जिजिि आिश्यकताए ं के जडस्ट्क-प्रकार के सैंडस भ जलए जिजििता (पहला पुनरीक्षण)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3 7 आई एस 4665 (भाग 2/अनुभाग 5) : 18 मई 2023 आई एस 4665 (भाग 2) 18 िून 2023 2023/आई ई सी 60745-2-5 : 2010 : 1984 हस्ट्त-जस्ट्ति िाली मोटर संचाजलत जिद्युत पोटेबल इलेजक्रक मोटर- उपकरण — सुरक्षा संचाजलत उपकरण भाग 2 जििेर् अपेक्षाए ाँ भाग 2 उपकरण के जलए अनुभाग 5 पररपत्र आरी जिजिि आिश्यकताए ं के जलए जिजििता (पहला पुनरीक्षण) 8 आई एस 4665 (भाग 2/अनुभाग 7) : 18 मई 2023 आई एस 4665 (भाग 2) 18 िून 2023 2023/आई ई सी 60745-2-7 : 1989 : 1984 हस्ट्त-जस्ट्ति िाली मोटर-संचाजलत पोटेबल इलेजक्रक मोटर- जिद्युत उपकरण — सरु क्षा संचाजलत उपकरण भाग 2 जििेर् अपेक्षाए ाँ भाग 2 उपकरण के जलए अनुभाग 7 गैर ज्िलनिील तरल पिािों जिजिि आिश्यकताए ं के जलए जिजििता के जलए स्ट्प्रे बंिकू ें (पहला पनु रीक्षण) 9 आई एस 12375 (भाग 10) : 2023 18 मई 2023 लाग ू नहीं लाग ू नहीं सिभरी के जलए प्रत्यारोपण — कूल्ह े के िोड़ के जलये आंजिक और पूण भकृजत्रम अंग (ISO 7206-10 : 2018, संिोजधत) भाग 10 मॉड्यूलर ऊरु जसर के स्ट्िैजतक भार के जलय ेप्रजतरोध का जनधाभरण 10 आई एस 12762 (भाग 7) : 2023/आई 18 मई 2023 आई एस 12762 (भाग 18 िून 2023 ई सी 60904-7 : 2019 7) : 2013/आई ई सी फोटोिोजल्टक जडिाइस 60904-7 : 2008 भाग 7 फोटोिोजल्टक उपकरणों के मापन प्रकाििोल्टीय युजियााँ के जलए िणभक्रमीय बेमेल सुधार की भाग प्रकाििोल्टीय गणना युजियों (पहला पुनरीक्षण) के मापन हते ु स्ट्पैक्रल असंतुलन सुधार की गणना 11 आई एस 12762 (भाग 14) : 18 मई 2023 लाग ू नहीं लाग ू नहीं 2023/आई ई सी टी आर 60904-14 : 2020 फोटोिोजल्टक जडिाइस भाग 14 पसंगल-िंक्िन पीिी मॉड्यूल के उत्पािन लाइन मापन के जलए दििाजनिेि अजधकतम जबिली उत्पािन4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] और मानक परीक्षण जस्ट्िजतयों पर ररपोर्टिंग 12 आई एस 12834 : 2023/आई ई सी टी 18 मई 2023 आई एस 12834 : 18 िून 2023 एस 61836 : 2016 2013/आई ई सी/ टी एस सौर फोटोिोजल्टक ऊिाभ प्रणाली — 61836 : 2007 ितें, पररभार्ाएं और प्रतीक सौर प्रकाििोल्टीय ऊिा भ (िसू रा पनु रीक्षण) प्रणाजलयााँ — िब्ि, पररभार्ाए ं एिं जचन्ह (पहला पुनरीक्षण) 13 आई एस 13586 : 2023/आई ई सी 18 मई 2023 आई एस 13586 : 1993 18 िून 2023 60276 : 2018 जबिली की घूणी मिीनरी के जलए काबभन ब्रुि, ब्रि काबनभ ब्रि, ब्रि होल्डर, दिक्पररितभक होल्डर, दिक्पररितभक तिा सिी-िलय पररभार्ाएाँ और नाम तिा सिी-िलय की पद्यजत पररभार्ाएाँ और नाम (पहला पुनरीक्षण) पद्धजत 14 आई एस 14197 : 2023/आई ई सी 18 मई 2023 आई एस 14197 : 18 िून 2023 60193 : 2019 1994/आई ई सी पब द्रिचाजलत टबाभइन, भंडारण पम्प और 193 : 1965 पम्प-टबाभइन — मॉडल स्ट्िीकरण द्रि चाजलत टरबाइनों के परीक्षण माडल स्ट्िीकरण परीक्षण (पहला पुनरीक्षण) की संजहता 15 आई एस 15999 (भाग 2/अनभु ाग 1) : 18 मई 2023 आई एस 15999 (भाग 18 िून 2023 2023/आई ई सी 60034-2-1 : 2014 2/अनुभाग 1) : जिद्युत घूर्णभय मिीन 2011/आई ई सी भाग 2 परीक्षण के द्वारा क्षजत और 60034-2-1 : 2007 िक्षता का जनधारभ ण घूणी जिद्युतीय मिीन ें अनुभाग 1 मानक तरीके (संकर्णभ भाग 2 परीक्षण पद्धजतयााँ िाहनों की मिीनों को छोड़कर) अनुभाग 1 परीक्षणों स े (पहला पुनरीक्षण) हाजन और िक्षता ज्ञात करने के जलए मानक पद्धजतयााँ (संकर्णभ िाहनों की मिीनों को छोड़कर) 16 आई एस 15999 (भाग 3) : 2023/आई 18 मई 2023 आई एस 15999 (भाग 18 िून 2023 ई सी 60034-3 : 2020 3) : 2016/आई ई सी घूणी जिद्युत मिीन 60034-3 : 2007 भाग 3 घुरजनया जिद्युत मिीनों के जलए घूणी जिद्युत मिीन ें[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5 स्ट्टीम टबाभइनों या कम्बिन गैस टबाभइनों भाग 3 घूणी जिद्युतीय द्वारा चाजलत तुल्यकारक िेनरे ेटरों के मिीनों के जलए स्ट्टीम जलए जििेर् अपेक्षाए ाँ टरबाइनों या कॉम्बसिन (पहला पुनरीक्षण) गैस टरबाइनों द्वारा चाजलत तल्ु यकारक िनरेटरों के जलए जििेर् अपेक्षाए ाँ 17 आई एस 15999 (भाग 4/अनभु ाग 1) : 18 मई 2023 आई एस 15999 (भाग 18 िून 2023 2023/आई ई सी 60034-4-1 : 2018 4) : 2017/आई ई सी 60034-4 : 2008 घूणी जिद्युत मिीन घूणी जिद्युत मिीनें भाग 4 तुल्यकालक मिीन की मात्राएाँ भाग 4 परीक्षणों से अनुभाग 1 परीक्षण पद्धजतयााँ तुल्यकालक मिीन की मात्राए ाँ ज्ञात करन े की (पहला पुनरीक्षण) पद्धजतयााँ 18 आई एस 16170 (भाग 4) : 2023/आई 18 मई 2023 लाग ू नहीं लाग ू नहीं ई सी 61853-4 : 2018 फोटोिोजल्टक (पीिी) मॉड्यूल प्रििभन परीक्षण और ऊिाभ रेटटंग भाग 4 मानक संिभभ िलिायु प्रोफाइल 19 आई एस 16221 (भाग 3) : 2023/आई 18 मई 2023 लाग ू नहीं लाग ू नहीं ई सी 62109-3 : 2020 फोटोिोजल्टक पािर जसस्ट्टम म ेंउपयोग के जलए पािर कन्िटभसभ की सुरक्षा भाग 3 फोटोिोजल्टक तत्िों के संयोिन में इलेक्रॉजनक उपकरणों के जलए जििेर् आिश्यकताएं 20 आई एस 16501 : 2023/आई ई सी 18 मई 2023 आई एस 16501 : 18 िून 2023 62061 : 2021 2017/आई ई सी 62061 मिीनरी की सुरक्षा — सुरक्षा से : 2005 संबंजधत जनयंत्रण प्रणाजलयों की मिीनों की सुरक्षा — कायाभत्मक सुरक्षा सरु क्षा सम्बंजधत (पहला पुनरीक्षण) जिद्युतीय, इलेक्रॉजनक एिं प्रोग्रामेबल इलेक्रॉजनक जनयंत्रण प्रणाजलयों की कायाभत्मक सुरक्षा6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] 21 आई एस 16782 : 2023/आई ई सी टी 18 मई 2023 आई एस 16782 : 18 िून 2023 एस 62910 : 2020 2018/आई ई सी यूरटजलटी — इंटरकनेक्टेड फोटोिोजल्टक 62910 : 2015 इन्िटभर — अडं र िोलटेि राइड टेस्ट्ट यूरटजलटी — इंटरकनेक्टेड प्रदक्रया — मापन द्वारा फोटोिोजल्टक इन्िटभर — (पहला पुनरीक्षण) अंडर िोलटेि राइड टेस्ट्ट प्रदक्रया — मापन द्वारा 22 आई एस 16792 (भाग 1/अनभु ाग 4) : 18 मई 2023 आई एस 16792 (भाग 18 िून 2023 2023/आई ई सी 62788-1-4 : 1/अनुभाग 4) : 2016+AMD1 : 2020 2019/आई ई सी फोटोिोजल्टक मॉड्यूल में प्रयुि सामग्री 62788-1-4 : 2016 के जलए मापन प्रदक्रया प्रकाििोल्टीय मॉड्यूलों म ें भाग 1 एनकैप्सलु ेंट्स प्रयुि पिािों हते ु मापन अनुभाग 4 ऑजप्टकल रांसजमिन का पद्धजतयााँ मापन और सौर-भाररत फोटॉन भाग 1 संपुटक रांसजमिन की गणना, पीलापन अनुभाग 4 प्रकाजिक सूचकांक, और यूिी कट-ऑफ तरंगिैध्र्य पारगमनता का मापन एि ं (पहला पुनरीक्षण) सौर-भाररत फोटोन पारगमनता यल्े लोनेस इंडेक्स, एि ं यूिी कट-ऑफ तरंग िैध्र्य की गणना 23 आई एस 16792 (भाग 1/अनभु ाग 6) : 18 मई 2023 आई एस 16792 (भाग 18 िून 2023 2023/आई ई सी 62788-1-6 : 1/अनुभाग 6) : 2017+AMD1 : 2020 2019/आई ई सी फोटोिोजल्टक मॉड्यूल में प्रयुि सामग्री 62788-1-6 : 2017 के जलए मापन प्रदक्रयाए ाँ प्रकाििोल्टीय मॉड्यूलों म ें भाग 1 एन्कैप्स्ट्यलु ेंटस प्रयुि पिािों हते ु मापन अनुभाग 6 एजिलीन-जिनाइल एसीटेट में पद्धजतयााँ इलाि की जडग्री जनधाभररत करन े के जलए भाग 1 संपुटक परीक्षण जिजधयााँ अनुभाग 6 एजिलीन- (पहला पुनरीक्षण) जिनाइल एसीटेट में संसाधन मात्रा िााँचने की परीक्षण जिजध 24 आई एस 16960 (भाग 2) : 2023/आई 18 मई 2023 लाग ू नहीं लाग ू नहीं ई सी 62446-2 : 2020 फोटोिोजल्टक (पीिी) जसस्ट्टम — परीक्षण, प्रलेखन और रखरखाि के जलए[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 7 आिश्यकताए ाँ भाग 2 जग्रड कनेक्टेड जसस्ट्टम — पीिी जसस्ट्टम का रखरखाि 25 आई एस 17841 (भाग 4) : 2023/आई 18 मई 2023 लाग ू नहीं लाग ू नहीं एस ओ 25539-4 : 2021 कार्डभयोिस्ट्कुलर इम्प्लांट्स — एंडोिस्ट्कुलर जडिाइसेस भाग 4 लेजपत एडं ोिस्ट्कुलर उपकरणों के जलए आईएसओ 17327-1 का अनुप्रयोग 26 आई एस 17956 : 2023/आई ई सी 18 मई 2023 लाग ू नहीं लाग ू नहीं 62892 : 2019 पीिी मॉड्यूल की जिस्ट्ताररत िमभल साइदकपलंग — परीक्षण प्रदक्रया 27 आई एस 17959 : 2023/आई ई सी टी 18 मई 2023 लाग ू नहीं लाग ू नहीं एस 63126 : 2020 उच्च तापमान पर संचालन के जलए पीिी मॉड्यूल, घटकों और सामजग्रयों को अहतभ ा प्राप्त करन े के जलए दििाजनिेि 28 आई एस 18114 : 2023/आई ई सी 18 मई 2023 आई एस/आई ई सी 18 िून 2023 62941 : 2016 62941 : 2019 भौजमक प्रकाििोल्टीय स्ट्िलीय फोटोिोजल्टक पीिी मॉड्यूल — (पी िी) मॉड्यूल — पी पीिी मॉड्यूल जनमाणभ के जलए गुणित्ता िी मॉड्यूल जडज़ाइन प्रणाली जिजििता एिं टाइप (पहला पुनरीक्षण) स्ट्िीकृजत के िर्धभत प्रत्यय हते ु दििाजनिेि 29 आई एस 18124 (भाग 1) : 2023/आई 18 मई 2023 लाग ू नहीं लाग ू नहीं ई सी 63092-1 : 2020 भिनों में फोटोिोजल्टक भाग 1 भिन-एकीकृत फोटोिोजल्टक मॉड्यूल के जलए आिश्यकताएाँ आई एस 18124 (भाग 2) : 2023/आई 18 मई 2023 लाग ू नहीं लाग ू नहीं 30 ई सी 63092-2 : 2020 भिनों में फोटोिोजल्टक भाग 2 भिन-एकीकृत फोटोिोजल्टक जसस्ट्टम के जलए आिश्यकताए ाँ8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] 31 आई एस 18127 : 2023/आई ई सी टी 18 मई 2023 लाग ू नहीं लाग ू नहीं एस 63156 : 2021 फोटोिोजल्टक जसस्ट्टम — जबिली रूपांतरण उपकरण प्रििनभ — ऊिाभ मूल्यांकन जिजध 32 आई एस 18128 : 2023/आई ई सी टी 18 मई 2023 लाग ू नहीं लाग ू नहीं एस 63157 : 2019 फोटोिोजल्टक जसस्ट्टम — जिद्युत रूपांतरण उपकरण के प्रभािी गुणित्ता आश्वासन के जलए दििाजनिेि 33 आई एस 18129 : 2023/आई ई सी 18 मई 2023 आई एस/आई ई सी 18 िून 2023 61701 : 1995 61701 : 2020 प्रकाििोल्टीय मॉड्यूल का फोटोिोजल्टक (पीिी) मॉड्यूल — नामक लिण जमस्ट्ट संक्षारण धुंध िगं परीक्षण परीक्षण (पहला पुनरीक्षण) 34 आई एस 18160 (भाग 1) : 2023/आई 18 मई 2023 लाग ू नहीं लाग ू नहीं ई सी टी एस 63106-1 : 2020 फोटोिोजल्टक पािर कनिज़भन उपकरण के परीक्षण के जलए प्रयुि जसमुलेटर — जसफाररिें भाग 1 ए.सी. पािर जसमुलेटर 35 लाग ू नहीं आई एस 18207 : 2023 18 मई 2023 लाग ू नहीं कार्डभयोपल्मोनरी बाईपास के िौरान एक रोगी को गैसीय माइक्रोएम्बोली (िी एम ् ई) के संचरण को कम करन े की क्षमताओं के सापेक्ष सीपीबी उपकरणो का मूल्यांकन (ISO/TR 19024 : 2016, सिं ोजधत) आई एस/आई ई सी 60079-6 : 18 मई 2023 आई एस/आई ई सी 18 मई 2024 36 2016+AMD1 2020 60079-6 : 2015 जिस्ट्फोटी पयाभिरण जिस्ट्फोटी पयाभिरण भाग 6 तेल जनमज्जन “o” द्वारा उपकरण भाग 6 तेल जनमज्जन “o” संरक्षण द्वारा उपकरण संरक्षण (िसू रा पनु रीक्षण) (पहला पुनरीक्षण)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 9 37 आई एस/आई ई सी 60079-7 : 2017 18 मई 2023 आई एस/आई ई सी 18 मई 2024 जिस्ट्फोटी पयाभिरण 60079-7 : 2015 भाग 7 बढ़ी सरु क्षा “e” द्वारा उपकरण जिस्ट्फोटी पयाभिरण संरक्षण भाग 7 बढ़ी सरु क्षा “e” (िसू रा पनु रीक्षण) द्वारा उपकरण संरक्षण (पहला पुनरीक्षण) 38 आई एस/आई ई सी 60079-19 : 2019 18 मई 2023 आई एस/आई ई सी 18 मई 2024 जिस्ट्फोटी पयाभिरण 60079-19 : 2010 भाग 19 उपस्ट्कर मरम्मत, ओिरहॉल, जिस्ट्फोटी पयाभिरण सुधार करना भाग 19 उपस्ट्कर मरम्मत, (िसू रा पनु रीक्षण) ओिरहॉल, सुधार करना (पहला पुनरीक्षण) 39 आई एस/आई ई सी 60079-25 : 2020 18 मई 2023 आई एस/आई ई सी 18 मई 2024 जिस्ट्फोटी पयाभिरण 60079-25 : 2010 भाग 25 जनितया जनरापि जिद्युत जिस्ट्फोटी पयाभिरण प्रणाजलयााँ भाग 25 जनितया (िसू रा पनु रीक्षण) जनरापि जिद्युत प्रणाजलयााँ (पहला पुनरीक्षण) 40 आई एस/आई ई सी 60079-26 : 2021 18 मई 2023 आई एस/आई ई सी 18 मई 2024 जिस्ट्फोटक िातािरण 60079-26 : 2014 भाग 26 पृिक्करण तत्िों या सुरक्षा के जिस्ट्फोटी पयाभिरण संयुि स्ट्तरों िाल ेउपकरण भाग 26 उपस्ट्कर सुरक्षा (िसू रा पनु रीक्षण) स्ट्तर (ईपीएल) िीए िाल े उपस्ट्कर (पहला पुनरीक्षण) 41 आई एस/आई ई सी/आई ई ई ई 60079- 18 मई 2023 आई एस/आई ई सी 18 मई 2024 60079-30-2 : 2007 30-2 : 2015 जिस्ट्फोटी पयाभिरण जिस्ट्फोटी पयाभिरण भाग 30 इलैजक्रकल भाग 30 इलेजक्रकल रोजधता लिे ताप रोजधता लेि ताप अनुभाग 2 जडिाइन, संस्ट्िापन एिं अनुभाग 2 जडज़ाइन, अनुरक्षण म ेंअनुप्रयोग की मागिभ र्िभका संस्ट्िापन एि ंअनरु क्षण म ें (पहला पुनरीक्षण) अनुप्रयोग की मागिभ र्िभका 42 आई एस/आई ई सी 60079-31 : 2022 18 मई 2023 आई एस/आई ई सी 18 मई 2024 जिस्ट्फोटी पयाभिरण 60079-31 : 2013 भाग 31 एंक्लोिर “टी” द्वारा उपस्ट्कर जिस्ट्फोटी पयाभिरण10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] धूल प्रज्िलन सुरक्षा भाग 31 एंक्लोिर “टी” (िसू रा पनु रीक्षण) द्वारा उपस्ट्कर धलू प्रज्िलन सुरक्षा (पहला पुनरीक्षण) 43 आई एस/आई ई सी 60384-14-1 : 18 मई 2023 आई एस/क्यूसी 302401 18 िून 2023 2016 : 1994/आई ई सी/क्यू सी इलेक्रॉजनक उपस्ट्कर म ेंउपभोग के जलए 302401 : 1993 िजड़त संधाररत्र मुख्य प्रिाय म ेंसंयोिन भाग 14 ररि जिस्ट्तुत जिजिजि — और जिद्युत चुम्बकीय जिद्युतचुम्बकीय हस्ट्तक्षेप िमन और व्यजतकरण जनरोध के जलय े मुख्य प्रिाय म ेंसंयोिन के जलए िजड़त जस्ट्िर संधाररयों के जलये संधाररत्र इलैक्रानी उपस्ट्कर खाली अनुभाग 1 मल्ू यांकन लेिेल डीिेड ब्यौरा क्षेत्रीय जिजिजि म ें प्रयुि जस्ट्िर संधा ररय लेबल डी का जनधाभरण 44 आई एस/आई ई सी 60556 : 2016 18 मई 2023 आईएस 8426 (भाग 1): 18 िून 2023 1977 माइक्रोिेि आिृजत्तयों पर अनुप्रयोग के माइक्रोिेि आिृजत्तयों पर जलए अजभप्रते िाइरोमग्नै ेरटक सामग्री — उपयोग के जलए गुणों को मापने के तरीके िाइरोमैग्नेरटक सामग्री के गुणों के मापन के तरीके भाग 1 चुंबकीयकरण आईएस 8426 (भाग 2): 1977 माइक्रोिेि आिृजत्तयों पर उपयोग के जलए िाइरोमैग्नेरटक सामग्री के गुणों के मापन के तरीके भाग 2 अनुनाि लाइनजिड्ि आईएस 8426 (भाग 3) : 1977 माइक्रोिेि आिृजत्तयों पर उपयोग के जलए िाइरोमैग्नेरटक सामग्री के गुणों के मापन के तरीके भाग 3 पारगम्यता, स्ट्पि घनत्ि और क्यरू ी तापमान पी. रािेि, िैज्ञाजनक एफ एिं उप महाजनिेिक (आई टी एस, पी आर टी, टी एन एम) [जिज्ञापन-III/4/असा./116/2023-24][भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 11 BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 19th May, 2023 Ref: HQ-PUB013/1/2020-PUB-BIS (594).— In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. SCHEDULE Sl. No. No., Year & Title of the Indian Date of No. , Year & Title of the Date of Standards Established Establishment Indian Standards to be Withdrawal withdrawn, if any (1) (2) (3) (4) (5) 1 IS 487 : 2023 18 May 2023 IS 487 : 2012 18 June 2023 Brushes, Paints and Varnishes — Oval, Brushes, Paints and Ferrule Bound; and Round, Ferrile Varnishes — (i) Oval, Bound Ferrule Bound; and (ii) (Sixth Revision) Round, Ferrile Bound (Fifth Revision) 2 IS 2616 : 2023 18 May 2023 IS 2616 : 1963 18 June 2023 Brush for Cleaning Tank and Specification for Commode/Lavatory — Specification Brush, (i) Cleaning Tank, (First Revision) and (ii) Commode and Lavatory 3 IS 2621 : 2023 18 May 2023 IS 2621 : 1976 18 June 2023 Brush, Commode Chutes — Specification for Brush, Specification Commode Chutes (Second Revision) (First Revision) 4 IS 2622 : 2023 18 May 2023 IS 2622 : 1986 18 June 2023 Brush, Banister (Hand Sweeping), Specification for Single — Specification Brush, Banister (Hand (Third Revision) Sweeping), Single (Second Revision) 5 IS 4665 (Part 1) : 2023/IEC 60745-1 18 May 2023 IS 4665 (Part 1) : 1984 18 June 2023 : 2006 Specification for Portable Hand-Held Motor-Operated Electric Electric Motor-Operated Tools Safety Tools Part 1 General Part 1 General Requirements Requirements and Tests (Second Revision) (First Revision) 6 IS 4665 (Part 2/Sec 3) : 2023/IEC 18 May 2023 IS 4665 (Part 2) : 1984 18 June 2023 60745-2-3 : 2006 Specification for Portable Hand-Held Motor-Operated Electric Electric Motor-Operated Tools — Safety Tools Part 2 Specific Part 2 Particular Requirements Requirements for Tools Section 3 Grinders Polishers and Disk- Type Sanders (First Revision) IS 4665 (Part 2/Sec 5) : 2023/IEC 18 May 2023 IS 4665 (Part 2) : 1984 18 June 2023 7 60745-2-5 : 2010 Specification for Portable Hand-Held Motor-Operated Electric Electric Motor-Operated12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] Tools — Safety Tools Part 2 Specific Part 2 Particular Requirements Requirements for Tools Section 5 Circular Saws (First Revision) 8 IS 4665 (Part 2/Sec 7) : 2023/IEC 18 May 2023 IS 4665 (Part 2) : 1984 18 June 2023 60745-2-7 : 1989 Specification for Portable Hand-Held Motor-Operated Electric Electric Motor-Operated Tools — Safety Tools Part 2 Specific Part 2 Particular Requirements Requirements for Tools Section 7 Spray Guns for Non- Flammable Liquids (First Revision) 9 IS 12375 (Part 10) : 2023 18 May 2023 NA NA Implants for Surgery — Partial and Total Hip-joint Prostheses (ISO 7206-10 : 2018, MOD) Part 10 determination of Resistance to Static Load of Modular Femoral Heads 10 IS 12762 (Part 7) : 2023/IEC 60904-7 : 18 May 2023 IS 12762 (Part 7) : 18 June 2023 2019 2013/IEC 60904-7 : 2008 Photovoltaic Devices Photovoltaic Devices Part 7 Computation of the Spectral Part 7 Computation of the Mismatch Correction for Spectral Mismatch Measurements of Photovoltaic Devices Correction for (First Revision) Measurements of Photovoltaic Devices 11 IS 12762 (Part 14) : 2023/IEC TR 18 May 2023 NA NA 60904-14 : 2020 Photovoltaic Devices Part 14 Guidelines for Production Line Measurements of Single-Junction PV Module Maximum Power Output and Reporting at Standard Test Conditions 12 IS 12834 : 2023/IEC TS 61836 : 2016 18 May 2023 IS 12834 : 2013/IEC TS 18 June 2023 Solar Photovoltaic Energy Systems — 61836 : 2007 Terms, Definitions and Symbols Solar Photovoltaic Energy (Second Revision) Systems — Terms, Definitions and Symbols (First Revision) 13 IS 13586 : 2023/IEC 60276 : 2018 18 May 2023 IS 13586 : 1993 18 June 2023 Carbon Brushes Brush Holders Definitions and Commutators and Ship-Rings Nomenclature for Carbon Definitions and Nomenclature Brushes, Brush-Holders, (First Revision) Commutators and Slip- Rings for Electrical Machinery 14 IS 14197 : 2023/IEC 60193 : 2019 18 May 2023 IS 14197 : 1994/IEC Pub 18 June 2023 Hydraulic Turbines Storage Pumps and 193 : 1965 Pump-Turbines — Model Acceptance Code for Model Acceptance Tests Tests of Hydraulic Turbines (First Revision)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 13 15 IS 15999 (Part 2/Sec 1) : 2023/IEC 18 May 2023 IS 15999 (Part 2/Sec 1) : 18 June 2023 60034-2-1 : 2014 2011/IEC 60034-2-1 : 2007 Rotating Electrical Machines Rotating Electrical Part 2 Determining Losses and Machines Efficiency from Tests Part 2 Method of Tests Section 1 Standard Methods Section 1 Standard Methods (Excluding Machines for Traction for Determining Losses and Vehicles) Efficiency from Tests (First Revision) (Excluding Machines for Traction Vehicles) 16 IS 15999 (Part 3) : 2023/IEC 60034-3 : 18 May 2023 IS 15999 (Part 3) : 18 June 2023 2020 2016/IEC 60034-3 : 2007 Rotating Electrical Machines Rotating Electrical Part 3 Specific Requirements for Machines Synchronous Generators Driven by Part 3 Specific Steam Turbines or Combustion Gas Requirements for Turbines and for Synchronous Synchronous Generators Compensators Driven by Steam Turbines (First Revision) or Combustion Gas Turbines 17 IS 15999 (Part 4/Sec 1) : 2023/IEC 18 May 2023 IS 15999 (Part 4) : 18 June 2023 60034-4-1 : 2018 2017/IEC 60034-4 : 2008 Rotating Electrical Machines Rotating Electrical Part 4 Electrically Excited Machines Synchronous Machine Quantities Part 4 Methods for Section 1 Test Methods Determining Synchronous (First Revision) Machine Quantities from Tests 18 IS 16170 (Part 4) : 2023/IEC 61853-4 : 18 May 2023 NA NA 2018 Photovoltaic (PV) Module Performance Testing and Energy Rating Part 4 Standard Reference Climatic Profiles 19 IS 16221 (Part 3) : 2023/IEC 62109-3 : 18 May 2023 NA NA 2020 Safety of Power Converters for Use in Photovoltaic Power Systems Part 3 Particular Requirements for Electronic Devices in Combination with Photovoltaic Elements 20 IS 16501 : 2023/IEC 62061 : 2021 18 May 2023 IS 16501 : 2017/IEC 62061 18 June 2023 Safety of Machinery — Functional : 2005 Safety of safety-Related Control Safety of Machinery — Systems Functional Safety of Safety- (First Revision) Related Electrical, Electronic and Programmable Electronic Control Systems 21 IS 16782 : 2023/IEC TS 62910 : 2020 18 May 2023 IS 16782 : 2018/IEC 62910 18 June 2023 Utility-Interconnected Photovoltaic : 2015 Inverters — Test Procedure for Under Utility-Interconnected14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] Voltage Ride — Through Photovoltaic Inverters Test Measurements Procedure for Low Voltage (First Revision) Ride-Through Measurements 22 IS 16792 (Part 1/Sec 4) : 2023/IEC 18 May 2023 IS 16792 (Part 1/Sec 4) : 18 June 2023 62788-1-4 : 2016+AMD1 : 2020 2019/IEC 62788-1-4 : 2016 Measurement Procedures for Materials Measurement Procedures Used in Photovoltaic Modules for Materials Used in Part 1 Encapsulants Photovoltaic Modules Section 4 Measurement of Optical Part 1 Encapsulants Transmittance and Calculation of the Section 4 Measurement of Solar-Weighted Photon Transmittance, Optical Transmittance and Yellowness Index, and UV Cut-Off Calculation of the Solar- Wavelength Weighted Photon (First Revision) Transmittance, Yellowness Index, and UV Cut-Off Wave length 23 IS 16792 (Part 1/Sec 6) : 2023/IEC 18 May 2023 IS 16792 (Part 1/Sec 6) : 18 June 2023 62788-1-6 : 2017+AMD1 : 2020 2019/IEC 62788-1-6 : 2017 Measurement Procedures for Materials Measurement Procedures Used in Photovoltaic Modules for Materials Used in Part 1 Encapsulants Photovoltaic Modules Section 6 Test Methods for Part 1 Encapsulants Determining the Degree of Cure in Section 6 Test Methods for Ethylene-Vinyl Acetate Determining the Degree of (First Revision) Cure in Ethylene-Vinyl Acetate 24 IS 16960 (Part 2) : 2023/IEC 62446-2 : 18 May 2023 NA NA 2020 Photovoltaic (PV) Systems — Requirements for Testing, Documentation and Maintenance Part 2 Grid Connected Systems — Maintenance of PV Systems 25 IS 17841 (Part 4) : 2023/ISO 25539-4 : 18 May 2023 NA NA 2021 Cardiovascular Implants — Endovascular Devices Part 4 Application of ISO 17327-1 for Coated Endovascular Devices 26 IS 17956 : 2023/IEC 62892 : 2019 18 May 2023 NA NA Extended Thermal Cycling of PV Modules — Test Procedure 27 IS 17959 : 2023/IEC TS 63126 : 2020 18 May 2023 NA NA Guidelines for Qualifying PV Modules, Components and Materials for Operation at High Temperatures 28 IS 18114 : 2023/IEC 62941 : 2019 18 May 2023 IS/IEC 62941 : 2016 18 June 2023 Terrestrial Photovoltaic (PV) Modules Terrestrial Photovoltaic — Quality System for PV Module (PV) Modules —[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 15 Manufacturing Guidelines for Increased (First Revision) Confidence in PV Module Design Qualification and Type Approval 29 IS 18124 (Part 1) : 2023/IEC 63092-1 : 18 May 2023 NA NA 2020 Photovoltaics in Buildings Part 1 Requirements for Building- Integrated Photovoltaic Modules 30 IS 18124 (Part 2) : 2023/IEC 63092-2 : 18 May 2023 NA NA 2020 Photovoltaics in Buildings Part 2 Requirements for Building- Integrated Photovoltaic Systems 31 IS 18127 : 2023/IEC TS 63156 : 2021 18 May 2023 NA NA Photovoltaic Systems — Power Conversion Equipment Performance — Energy Evaluation Method 32 IS 18128 : 2023/IEC TS 63157 : 2019 18 May 2023 NA NA Photovoltaic Systems — Guidelines for Effective Quality Assurance of Power Conversion Equipment 33 IS 18129 : 2023/IEC 61701 : 2020 18 May 2023 IS/IEC 61701 : 1995 18 June 2023 Photovoltaic (PV) Modules — Salt Salt Mist Corrosion Testing Mist Corrosion Testing of (First Revision) Photovoltaic (PV) Modules 34 IS 18160 (Part 1) : 2023/IEC TS 18 May 2023 NA NA 63106-1 : 2020 Simulators Used for Testing of Photovoltaic Power Conversion Equipment — Recommendations Part 1 a.c Power Simulators 35 IS 18207 : 2023 18 May 2023 NA NA Evaluation of CPB Devices Relative to their Capabilities of Reducing the Transmission of Gaseous Microemboli (GME) to a Patient During Cardiopulmonary Bypass (ISO/TR 19024 : 2016, MOD) 36 IS/IEC 60079-6 : 2016+AMD1 2020 18 May 2023 IS/IEC 60079-6 : 2015 18 May 2024 Explosive Atmospheres Explosive Atmospheres Part 6 Equipment Protection by Part 6 Equipment Protection Increased Safety “o” by Liquid Immersion “o” (Second Revision) (First Revision) 37 IS/IEC 60079-7 : 2017 18 May 2023 IS/IEC 60079-7 : 2015 18 May 2024 Explosive Atmospheres Explosive Atmospheres Part 7 Equipment Protection by Part 7 Equipment Protection Increased Safety “e” by Increased Safety “e” (Second Revision) (First Revision) 38 IS/IEC 60079-19 : 2019 18 May 2023 IS/IEC 60079-19 : 2010 18 May 2024 Explosive Atmospheres Explosive Atmospheres16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] Part 19 Equipment Repair, Overhaul, Part 19 Equipment Repair, and Reclamation Overhaul, and Reclamation (Second Revision) (First Revision) 39 IS/IEC 60079-25 : 2020 18 May 2023 IS/IEC 60079-25 : 2010 18 May 2024 Explosive Atmospheres Explosive Atmospheres Part 25 Intrinsically Safe Electrical Part 25 Intrinsically Safe Systems Electrical Systems (Second Revision) (First Revision) 40 IS/IEC 60079-26 : 2021 18 May 2023 IS/IEC 60079-26 : 2014 18 May 2024 Explosive Atmospheres Explosive Atmospheres Part 26 Equipment with Separation Part 26 Equipment with Elements or Combined Levels of Equipment Protection Level Protection (EPL) GA (Second Revision) (First Revision) 41 IS/IEC/IEEE 60079-30-2 : 2015 18 May 2023 IS/IEC 60079-30-2 : 2007 18 May 2024 Explosive Atmospheres Explosive Atmospheres Part 30 Electrical Resistance Trace Part 30 Electrical Resistance Heating Trace Heating Section 2 Application Guide for Section 2 Application Guide Design, Installation and Maintenance for Design, Installation and (First Revision) Maintenance 42 IS/IEC 60079-31 : 2022 18 May 2023 IS/IEC 60079-31 : 2013 18 May 2024 Explosive Atmospheres Explosive Atmospheres Part 31 Equipment Dust Ignition Part 31 Equipment Dust Protection by Enclosure “t” Ignition Protection by (Second Revision) Enclosure “t” (First Revision) 43 IS/IEC 60384-14-1 : 2016 18 May 2023 IS/QC 302401 : 1994/IEC 18 June 2023 Fixed Capacitors for Use in Electronic QC 302401 : 1993 Equipment Fixed Capacitors for Use in Part 14 Blank Detail Specification — Electronic Equipment Fixed Capacitors for Electromagnetic Blank Detail Specification Interference for Fixed Capacitors for Suppression and Connection to the Electromagnetic Supply Mains Interference Suppression Section 1 Assessment Level DZ and Connection to the Supply Mains Assessment Level D 44 IS/IEC 60556 : 2016 18 May 2023 IS 8426 (Part 1) : 1977 18 June 2023 Gyromagnetic Materials Intended for Methods of Measurements Application at Microwave Frequencies for Properties of — Measuring Methods for Properties Gyromagnetic Materials for Use at Microwave Frequencies Part 1 Magnetization IS 8426 (Part 2) : 1977 Methods of Measurements for Properties of Gyromagnetic Materials for Use at Microwave Frequencies Part 2 Resonance Linewidth IS 8426 (Part 3) : 1977 Methods of Measurements[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 17 for Properties of Gyromagnetic Materials for Use at Microwave Frequencies Part 3 Permittivity, Apparent Density and Curie Temperature P. RAJESH, Scientist F & DDG (ITS, PRT & TNM) [ADVT.-III/4/Exty./116/2023-24] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research