## Report on Notification Regarding Indian Standards (September 17, 2021)
**1. Executive Summary:**
This report analyzes a notification issued by the Bureau of Indian Standards (BIS) on September 17, 2021. The notification pertains to the establishment and withdrawal of several Indian Standards (IS) across various sectors. This appears to be an amendment rather than a new policy, as it involves updating existing standards with newer versions, often aligning with international standards (ISO/IEC). The key finding is that BIS is actively updating and harmonizing Indian standards, potentially to improve product quality, ensure safety, and facilitate international trade.
**2. Introduction:**
This report provides an overview and analysis of the notification published by the Bureau of Indian Standards (BIS) on September 17, 2021, based solely on the provided text. The report aims to inform affected industries about the updated and withdrawn Indian Standards.
**3. Policy Overview:**
This notification amends existing Indian Standards by introducing updated versions and withdrawing older ones.
* **Core Objective(s):** Based on the provided text, the core objectives appear to be:
* To update and maintain Indian Standards, aligning them with international standards (ISO/IEC) where applicable.
* To withdraw obsolete standards, ensuring that only current and relevant standards are in force.
* To provide specifications and guidelines for various products and processes, encompassing diverse areas such as carbon black for paints, vulcanized rubber testing, agricultural tractors, identification cards, water reuse, and electronic equipment.
**4. Background and Rationale:**
The notification acts as an amendment to existing policies. The likely rationale for these specific amendments (updating and withdrawing standards) is to:
* Incorporate advancements in technology, materials, and processes into the standards.
* Align Indian standards with international best practices, facilitating trade and ensuring compatibility.
* Address any identified shortcomings or gaps in existing standards.
* Reflect changes in regulatory requirements.
**5. Key Provisions / Changes:**
This section focuses specifically on the changes introduced by the notification. The notification lists numerous standards that have been either newly established or withdrawn. Key changes include:
* **Establishment of New Standards:** Several Indian Standards have been established with the date of effect being September 14, 2021. Many of these new standards align with international standards (ISO/IEC).
* **Withdrawal of Old Standards:** Concurrently, older versions of these Indian Standards are withdrawn, with the date of withdrawal being October 15, 2021.
* **Examples of Specific Changes:**
* **IS 40:2021:** Establishes a new specification for carbon black for paints, replacing IS 40:1971. This change likely incorporates advancements in carbon black production or paint formulation.
* **IS 3400 Part 11:2021:** Introduces a new method for testing vulcanized rubber, aligning with ISO 4662:2017. This change likely updates the testing procedure to reflect improved accuracy or relevance.
* **IS 14172:2021:** Establishes a new standard for identification cards aligning with ISO/IEC 7810:2003.
The *difference* in effect is that products and processes must now adhere to the newer established standards. Products conforming to withdrawn standards may no longer be considered compliant.
**6. Target Audience and Stakeholders:**
Based on the text, the directly affected stakeholders include:
* Manufacturers of products covered by the listed standards (e.g., carbon black, rubber, agricultural machinery, electronic equipment).
* Testing laboratories and certification bodies that assess compliance with these standards.
* Industries involved in water treatment and reuse.
* Organizations utilizing mechanical structures for electronic equipment.
**7. Implementation Aspects (Inferred):**
* **Responsible Agency:** The Bureau of Indian Standards (BIS) is the responsible agency for implementing and enforcing these changes.
* **Timelines:** The established standards came into effect on September 14, 2021. The older standards were to be withdrawn on October 15, 2021. This implies a transition period for industries to adapt to the new standards.
* **Industry Responsibility:** Industries must ensure that their products and processes comply with the new standards by the specified dates. This likely involves updating manufacturing processes, testing procedures, and documentation.
**8. Expected Outcomes / Impact of Changes:**
The intended outcomes of these amendments are likely to include:
* **Improved Product Quality:** The updated standards should lead to improvements in the quality, performance, and safety of products covered by the standards.
* **Enhanced Competitiveness:** Alignment with international standards can enhance the competitiveness of Indian products in global markets.
* **Greater Efficiency:** The updated processes and practices within the new standard are expected to increase efficiency.
* **Reduced Trade Barriers:** Harmonization with international standards can reduce technical barriers to trade.
**9. Conclusion:**
The notification from the Bureau of Indian Standards (BIS) regarding the establishment and withdrawal of Indian Standards represents an important step in maintaining and improving product standards across various sectors. It reflects a commitment to align with international best practices and drive continuous improvement in product quality and safety. Industries affected by these changes must promptly adopt the new standards to ensure compliance and maintain competitiveness. The timely implementation of these updated standards is essential for achieving the desired outcomes of improved product quality, enhanced competitiveness, and reduced trade barriers.
Key Entities Referenced
NEW DELHI: Place of Publication
Bureau of Indian Standards: Organization that has established Indian Standards
Bureau of Indian Standards Rules, 2018: Rules under which the notification is issued
Indian Standards: Standards notified by the Bureau of Indian Standards
ISO 4662 : 2017: International standard
ISO 56732 : 2005: International standard
ISO 5673: International standard
ISOIEC 7810 : 2003: International standard
ISO 20419 : 2018: International standard
ISO 204681 : 2018: International standard
ISO 204682 : 2019: International standard
ISO 219391 : 2019: International standard
ISIEC 602973101 : 2004: Standard related to Mechanical Structures for Electronic Equipment Dimensions
IS 11719 Part 2Sec 1 : 1986: Indian standard related to Dimensions of Mechanical Structures of the 4826 mm Series
IS 11719 Part 2Sec 2 : 1986: Indian standard related to Dimensions of Mechanical Structures of the 4826 mm Series
ISIEC 606033 : 1987: Standard related to Connectors for Frequencies below 3 MHz for Use with Printed Boards
ISIEC 606036 : 1987: Standard related to Connectors for Frequencies below 3 MHz for Use with Printed Boards
ISIEC 606038 : 1990: Standard related to Connectors for Frequencies Below 3 MHz for Use with Printed Boards
ISIEC 6060311 : 1992: Standard related to Connectors for Frequencies below 3 MHz for use with Printed Boards
ISIEC 6060313 : 1995: Standard related to Connectors for Frequencies Below 3 MHz for Use with Printed Boards
ISIEC 6060314 : 1998: Standard related to Connectors for Frequencies Below 3 MHz for use with Printed Boards
ISIEC 60915 : 2006: Standard related to Capacitors and Resistors for Use in Electronic Equipment
IS 4586 Part IISec 2 : 1980: Indian Standard related to Dimensions of Spindles and of Shaft Ends Bushes and for the Mounting
ISIEC 610201 : 2019: Standard related to Electromechanical Switches for Use in Electrical and Electronic Equipment
IS QC 960000 : 1995IEC: Standard related to Electromechanical Switches for Use in Electrical and Electronic Equipment
QC 960000 : 1991: Standard related to Electromechanical Switches for Use in Electrical and Electronic Equipment
ISIEC 610764100 : 2001: Standard related to Connectors for Electronic Equipment
ISIEC 610764102 : 1997: Standard related to Connectors with Assessed Quality for Use in d.c., LowFrequency Analogue and in Digital High Speed Data Applications
ISIEC 610764103 : 1999: Standard related to Connectors for Use in d.c. Lowfrequency Analogue and Digital HighSpeed Data Applications
ISIEC 610764104 : 1999: Standard related to Connectors for Use in d.c. LowFrequency Analogue and Digital HighSpeed Data Applications
ISIEC 610764115 : 2003: Standard related to Connectors for Electronic Equipment
InfiniBand: Type of Backplane Connector for Electronic Equipment
ISIEC 622092 : 2019: Standard related to Human Exposure to Radio Frequency Fields
ISIEC 622092 : 2010: Standard related to Human Exposure to Radio Frequency Fields
30 MHz: Lower bound of frequency range
6 GHz: Upper bound of frequency range
ISIEC 622093 : 2019: Standard related to Measurement Procedure for the Assessment of Specific Absorption Rate of Human Exposure to Radio Frequency Fields
600 MHz: Lower bound of frequency range
ISIEC 62271102 : 2018: Standard related to HighVoltage Switchgear and Controlgear
ISIEC 62271102 : 2003: Standard related to HighVoltage Switchgear and Controlgear
ISIEC 6235111 : 2016: Standard related to Power Systems Management and Associated Information Exchange Data and Communications Security
ISIEC TR 6235113 : 2016: Standard related to Power Systems Management and Associated Information Exchange Data and Communications Security
Manak Bhavan: Building of Bureau of Indian Standards, New Delhi
9 Bahadur Shah Zafar Marg: Address of Bureau of Indian Standards in New Delhi
New Delhi 110 002: Address of Bureau of Indian Standards
Kolkata: Regional Office of Bureau of Indian Standards
Chandigarh: Regional Office of Bureau of Indian Standards
Chennai: Regional Office of Bureau of Indian Standards
Mumbai: Regional Office of Bureau of Indian Standards
Ahmedabad: Branch Office of Bureau of Indian Standards
Bengaluru: Branch Office of Bureau of Indian Standards
Bhopal: Branch Office of Bureau of Indian Standards
Bhubaneshwar: Branch Office of Bureau of Indian Standards
Coimbatore: Branch Office of Bureau of Indian Standards
Dehradun: Branch Office of Bureau of Indian Standards
Faridabad: Branch Office of Bureau of Indian Standards
Ghaziabad: Branch Office of Bureau of Indian Standards
Guwahati: Branch Office of Bureau of Indian Standards
Hyderabad: Branch Office of Bureau of Indian Standards
Jaipur: Branch Office of Bureau of Indian Standards
Jammu: Branch Office of Bureau of Indian Standards
Jamshedpur: Branch Office of Bureau of Indian Standards
Lucknow: Branch Office of Bureau of Indian Standards
Nagpur: Branch Office of Bureau of Indian Standards
Parwanoo: Branch Office of Bureau of Indian Standards
Patna: Branch Office of Bureau of Indian Standards
Pune: Branch Office of Bureau of Indian Standards
Raipur: Branch Office of Bureau of Indian Standards
Rajkot: Branch Office of Bureau of Indian Standards
Kochi: Branch Office of Bureau of Indian Standards
Vishakhapatanam: Branch Office of Bureau of Indian Standards
J. ROY CHOWDHURY: Scientist G DDG Standardization PM
Government of India Press, Ring Road, Mayapuri, New Delhi110064: Uploaded by Dte. of Printing
रजजस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-21092021-229835
xxxGIDHxxx
CG-DL-E-21092021-229835
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 401] नई ददल्ली, मगं ल ार, जसतम्ब र 21, 2021/भाद्र 30, 1943
No. 401] NEW DELHI, TUESDAY, SEPTEMBER 21, 2021/BHADRA 30, 1943
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेज भाग)
अजधसचू ना
नई ददल्ली, 17 जसतम्बर, 2021
सदं भ:भ HQ-PUB013/1/2020-PUB-BIS(221).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण में भारतीय मानक ब्यूरो एतद्द्वारा अजधसूजचत करता ह ै की जजन भारतीय मानकों के ज रण
इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ म ें ददये गये ह,ैं तीसरे स्ट्तभं में इंजगत जतजथ को स्ट्थाजपत हो गये ह ैं। चौथे स्ट्तंभ में ददय े
गय े मानकों के ज रण, यदद कोई हो तो े भी साथ-साथ लाग ू रहगें े जब तक े पााँच ें स्ट्तंभ में इंजगत जतजथ को ापस जलए
जाने ह ैं ।
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्थापन जतजथ भारतीय मानकों, यदद ापस जलए जान े ापस होंन े
स.ं र् भतथा िीर्कभ हैं, की सख्ं या, र् भतथा िीर्कभ की जतजथ
(1) (2) (3) (4) (5)
1 आई एस 40 : 2021 14 जसतम्बर 2021 आई एस 40 : 1971 15 अक्टूबर
रोगन के जलए काबभन ब्लैक ─ ज जिजि रोगन के जलए काबभन ब्लैक के जलए 2021
(दसू रा पुनरीक्षण) ज जिजि
(पहला पुनरीक्षण)
5310 GI/2021 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
2 आई एस 3400 (भाग 11) : 14 जसतम्बर 2021 आई एस 3400 (भाग 11) : 1985 15 अक्टूबर
2021/आई एस ओ 4662 : 2017 ल्कनीकृत रबड़ हते ु परीक्षण की 2021
ल्कनीकृत रबड़ हते ु परीक्षण की पद्धजतयााँ
पद्धजतयााँ भाग 11 ररबाउंड ररजिल्यन्स ज्ञात करना
भाग 11 ररबाउंड ररजिल्यन्स ज्ञात (पहला पुनरीक्षण)
करना
(दसू रा पुनरीक्षण)
3 आई एस 10318 (भाग 2) : 14 जसतम्बर 2021 आई एस 10318 : 2002/आई एस ओ 15 अक्टूबर
2021/आई एस ओ 5673-2 : 2005 5673 : 1993 2021
कृजर् रैक्टर और मिीनरी ─ पा र कृजर् रैक्टर ए ं मिीनरी ─ पा र टेक-
टेक-ऑफ चालक धुरी और िजि आफ् चालक धुरी और िजि जनज जि
जनज जि (पा र इनपुट) संयोजन (पा र इनपुट) संयोजन की जस्ट्थजत
भाग 2 पी टी ओ चालक धुरी के (पहला पुनरीक्षण)
उपयोग हते ु ज जिजि, तथा पी टी ओ
ड्राइ लाइन की जस्ट्थजत और
जक्लयरेन्स तथा ज जभन्न् संलग्नक हेतु
पी आइ सी
(दसू रा पुनरीक्षण)
4 आई एस 14172 : 2021/आई एस 14 जसतम्बर 2021 आई एस 14172 : 1994 15 अक्टूबर
ओ/आई ई सी 7810 : 2003 पहचान पत्र ─ भौजतक ज िेर्ताएं 2021
पहचान पत्र ─ भौजतक ज िेर्ताएं
(पहला पुनरीक्षण)
5 आई एस 17664 : 2021/आई एस 14 जसतम्बर 2021 लागू नहीं लागू नहीं
ओ 20419 : 2018
पररिोजधत अपजिि जल का ससचाई
के जलए पुनप्रभयोग ─ पररिोजधत
अपजिि जल का ससचाई प्रणाजलयााँ
और प्रथाओं के अनुकूलन के जलए
ददिाजनदिे
6 आई एस 17665 (भाग 1) : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
2021/आई एस ओ 20468-1 :
2018
जल के पुनप्रभयोग प्रणाली के जलये
पररष्करण तकनीदकयों की प्रदिभन
क्षमता के मूल्यांकन हते ु मागभदिी
जसद्धांत
भाग 1 सामान्य
7 आई एस 17665 (भाग 2) : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
2021/आई एस ओ 20468-2 :
2019
जल के पुनप्रभयोग प्रणाली के जलये
पररष्करण तकनीदकयों की प्रदिभन
क्षमता के मूल्यांकन हते ु मागभदिी
जसधदांत[भाग III—खण् ड 4] भारत का राजपत्र : असाधारण 3
भाग 1 ग्रीन हाउस गैस उत्सजभन के
आधार पर पररष्करण पद्धजतयों की
प्रदिभन क्षमता के मूल्यांकन की
कायभप्रणाली
8 आई एस 17666 (भाग 1) : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
2021/आई एस ओ 21939-1 :
2019
जल के पुनप्रभयोग के उद्देश्य के जलए
औद्योजगक अपजिि जल के पररष्करण
में ऊजाभ खपत की गणना और व्यि
करने की ज जध
भाग 1 जैज क प्रदक्रया
9 आई एस/आई एस ओ/आई ई सी 14 जसतम्बर 2021 लागू नहीं लागू नहीं
29192-6 : 2019
सूचना प्रौद्योजगकी ─ लाइट् ेट
दक्रप्टोग्राफी
भाग 6 संदिे प्रमाणीकरण कोड (मैक)
10 आई एस/आई ई सी 60297-3-101 : 14 जसतम्बर 2021 आई एस 11719 (भाग 2/अनुभाग 1) : 15 अक्टूबर
2004 1986 2021
इलेक्रॉजनक उपकरणों के जलए यांजत्रक 482’6 जममी श्ृंखला के यांजत्रक
संरचनाएं संरचनाओं के आयाम
भाग 3 482.6 जममी (19 इंच) भाग 2 सब्रक और संबद्ध प्लग-इन
श्ृंखला के यांजत्रक संरचनाओं का इकाइयााँ
आयाम अनुभाग 1 सब्रक
अनुभाग 101 सब्रक और संबद्ध प्लग- आई एस 11719 (भाग 2/अनुभाग 2) :
इन इकाइयााँ 1986
482’6 जममी श्ृंखला के यांजत्रक
संरचनाओं के आयाम
भाग 2 सब्रक और संबद्ध प्लग-इन
इकाइयााँ
अनुभाग 2 प्लग-इन इकाइयााँ
11 आई एस/आई ई सी 60603-3 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
1987
मुदद्रत बोडों के साथ प्रयोग के जलए 3
मेगाहट्जभ फ़्रीक्वेंसी के नीचे कनेक्टसभ
भाग 3 2.54 जममी (0.100 इंच) पर
फैला हुआ कॉंटॅक्ट्स और स्ट्टॅगडभ
टरर्ममनेिन्स ाले मुदद्रत
बोडों के जलए टू पाटभ कनेक्टसभ
12 आई एस/आई ई सी 60603-6 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
1987
सप्रटेड बोडभ के साथ प्रयोग के जलए 3
मेगाहटभज से कम आ ृजि के संयोजक4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
भाग 6 1.6 जमजम (0.063 इन)
नामीय मोटाई के एक या दोनों तरफ
से सप्रटेड बोडभ के जलए छोर-सॉकेट
संयोजक 2.54 जमजम (0.1 इन) संपकभ
अंतराल के साथ
13 आई एस/आई ई सी 60603-8 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
1990
सप्रटेड बोडभ के साथ प्रयोग के जलए 3
मेगाहटभज से कम आ ृजि के संयोजक
भाग 8 0.63 जममी × 0.63 जममी के
गभ पुरुर् संपकों के साथ 2.54 जममी
(0.1 इन) की बुजनयादी जग्रड के जलए
मुदद्रत बोडों के जलए दो-भाग कनेक्टर
14 आई एस/आई ई सी 60603-11 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
1992
मुदद्रत बोडों के साथ प्रयोग के जलए 3
मेगाहट्जभ फ़्रीक्वेंसी के नीचे कनेक्टसभ
भाग 11 संकेंदद्रत कनेक्टसभ के जलए
ज स्ट्तार ज जनदिे (मुि कनेक्टसभ और
दफक्स्ट्ड कनेक्टसभ के जलए आयाम)
15 आई एस/आई ई सी 60603-13 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
1995
मुदद्रत बोडों के साथ प्रयोग के जलए 3
मेगाहट्जभ फ़्रीक्वेंसी के नीचे कनेक्टसभ
भाग 13 नॉन आक्सेजसबल इन्सुलेिन
जडसप्लेसमेंट
टरर्ममनेिन्स (आईडी) के जलए फ्री
कनेक्टसभ के साथ 2.54 जममी
(0.1 इच) के बेजसक जग्रड के मुदद्रत
बोडों के जलए असेस्ट्ड क्वाजलटी के दो-
भाग कनेक्टरों का ज रण ज जनदिे
16 आई एस/आई ई सी 60603-14 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
1998
मुदद्रत बोडभ के साथ उपयोग के जलए 3
मेगाहटभज के नीचे की आ ृजियों के
जलए कनेक्टसभ
भाग 14 कम-आ ृजि ाले ऑजडयो
और ीजडयो अनुप्रयोगों जैसे ऑजडयो,
ीजडयो और ऑजडयो-ज िुअल
उपकरण के जलए पररपत्र कनेक्टर के
जलए ज स्ट्तार ज जनदिे
17 आई एस/आई ई सी 60915 : 2006 14 जसतम्बर 2021 आई एस 4586 (भाग 2/अनुभाग 2) : 15 अक्टूबर
इलेक्रॉजनक उपकरणों में उपयोग के 1980 2021
जलए कैपेजसटर और प्रजतरोधक ─ सस्ट्पडल संचाजलत इलेक्रॉजनक घटकों के[भाग III—खण् ड 4] भारत का राजपत्र : असाधारण 5
ससगल-होल की माउंटटग, बुिस, और जलए सस्ट्पडल के आयाम और माउंटटग
बुि-माउंटेड िाफ्ट-ऑपरेटेड व्य स्ट्था
इलेक्रॉजनक उपकरण के जलए पसंदीदा भाग 2 माउंटटग व्य स्ट्था
आयाम अनुभाग 2 दफसक्सग नट
18 आई एस/आई ई सी 61020-1 : 14 जसतम्बर 2021 आई एस क्यू सी 960000 : 1995/आई 15 अक्टूबर
2019 ई सी क्यू सी 960000 : 1991 2021
ज द्युत और इलेक्रॉजनक उपकरणों में इलैक्रानी उपस्ट्कर में उपयोग के जलये
उपयोग के जलए इलेक्रामकैजनकल ज द्युत यांजत्रक जस्ट् च
जस्ट् च भाग 1 ज जिजि
भाग 1 सामान्य ज जनदिे
19 आई एस/आई ई सी 61076-4-100 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
2001
इलेक्रॉजनक उपकरणों के जलए
कनेक्टसभ
भाग 4 गुण िा ाले मूल्यांकन के
साथ मुदद्रत बोडभ कनेक्टर
अनुभाग 100 मुदद्रत बोडभ और
बैकप्लेन के जलए 2.5 जमजम के जग्रड
ाले दो-भाग कनेक्टर मााँड्यूल के जलए
ज रण ज जनदिे
20 आई एस/आई ई सी 61076-4-102 : 14 जसतम्बर 2021 लागू नहीं लाग ूनहीं
1997
डी.सी. कम-आ ृजि एनालॉग और
जडजजटल उच्च गजत डेटा अनुप्रयोगों में
उपयोग के जलए मूल्यांकन की गई
गुण िा के साथ कनेक्टसभ
भाग 4 मुदद्रत बोडभ कनेक्टसभ
अनुभाग 102 पू भ-केंदद्रत, कोसडग और
प्रारंजभक संभोग सुज धाओं के साथ
प्लग-इन इकाइयों के कई उपयोगों के
जलए दो-भाग एकल-पोल कनेक्टसभ के
जलए ज रण ज जनदिे , आई ई सी
60917 के अनुसार एक मीररक जग्रड
ाले
21 आई एस/आई ई सी 61076-4-103 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
1999
कम फ्रीक्वेन्सी एनालॉग और जडजजटल
उच्च गजत डेटा अनुप्रयोगो में उपयोग के
जलए d.c कनेक्टसभ
भाग 4 गुण िा ाले मूल्यांकन के
साथ मुदद्रत बोडभ कनेक्टर
अनुभाग 103 जिलसडग और 2.5
जममी का बेजसक जग्रड के साथ दो-भाग
कनेक्टसभ के जलए ज स्ट्तार ज जनदिे6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
22 आई एस/आई ई सी 61076-4-104 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
1999
कम फ्रीक्वेन्सी एनालॉग और जडजजटल
उच्च गजत डेटा अनुप्रयोगो में उपयोग के
जलए d.c. कनेक्टसभ
भाग 4 गुण िा ाले मूल्यांकन के
साथ मुदद्रत बोडभ कनेक्टर
अनुभाग 104 0.5 जममी के एकाजधक
जग्रड पर टर्ममनेिन के साथ 2.0 जममी
का मूल जग्रड ाले दो-भाग मॉड्यूलर
कनेक्टर के जलए ज स्ट्तार ज जनदिे
23 आई एस/आई ई सी 61076-4-115 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
2003
इलेक्रॉजनक उपकरणों के जलए
कनेक्टसभ
भाग 4 मुदद्रत बोडभ कनेक्टर
अनुभाग 115 InfiniBand उपकरण
के जलए बैकप्लेन कनेक्टर
24 आई एस/आई ई सी 62209-2 : 14 जसतम्बर 2021 आई एस/आई ई सी 62209-2 : 2010 15 अक्टूबर
2019 हस्ट्तधाररत ए ंिरीर पर अजधरोजपत 2021
हस्ट्त-जस्ट्तथ ् इंसानी िरीर आरोजपत बेतार संचार युजियों से रेजडयो आ ृजि
बेतार संचार यंत्र से रेजडयो आ ृजि के क्षत्रे ों से मान िारीर पर प्रभा ─
ज दकरण का इन्सान पर अना रण ─ मान मॉडल, इंस्ट्टुमेंटेिन प्रदक्रयााँऐ
इंसानी मॉडल, मापयंत्रण, प्रदक्रयाऐ भाग 2 मान िरीर के सामीप्य में प्रयुि
भाग 2 मान िरीर के सामीप्य में बेतार संचार युजियों हते ु ज जिजि
प्रयुि बेतार संचार युजियों हते ु अ िोर्ण दर (एसएआर) ज्ञात करने की
ज जिजि अ िोर्ण दर (एसएआर) प्रदक्रया (आ ृजि रेंज 30 MHz से 6
ज्ञात करने की प्रदक्रया (आ ृजि रेंज GHz)
30 मेगा हिे भ से 6 गीगा हिे )भ
(पहला पुनरीक्षण)
25 आई एस/आई ई सी 62209-3 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
2019
हस्ट्त-जस्ट्तथ इंसानी िरीर आरोजपत
बेतार संचार यंत्र से रेजडयो आ ृजि के
ज दकरण का इन्सान पर अना रण
इंसानी मॉडल, मापयंत्रण,
प्रदक्रयाएं
भाग 3 ेक्टर माप आधाररत प्रणाली
(आ ृजि रेंज 600 मेगा हिे भ से 3 गीगा
हिे भ)[भाग III—खण् ड 4] भारत का राजपत्र : असाधारण 7
26 आई एस/आई ई सी 62271-102 : 14 जसतम्बर 2021 आई एस/आई ई सी 62271-102 : 15 अक्टूबर
2018 2003 2021
उच्च- ोल्टता के जस्ट् चजगयर और उच्च- ोल्टता के जस्ट् चजगयर और
कंरोलजगयर जनयंत्रणजगयर जनयंत्रणजगयर
भाग 102 प्रत्या ती धारा ज योजक भाग 102 प्रत्या ती धारा ज योजक भू-
और भू-सम्पकभन जस्ट् च सम्पकभन जस्ट् च
(पहला पुनरीक्षण)
27 आई एस/आई ई सी 62351-11 : 14 जसतम्बर 2021 लागू नहीं लागू नहीं
2016
पा र जसस्ट्टम प्रबंधन और संबंजधत
सूचना का आदान-प्रदान ─ डेटा और
संचार सुरक्षा
भाग 11 एक्स एम एल दस्ट्ता ेजों के
जलए सुरक्षा
आई एस/आई ई सी टी आर 62351-
28 13 : 2016 14 जसतम्बर 2021 लागू नहीं लागू नहीं
पा र जसस्ट्टम प्रबंधन और संबंजधत
सूचना का आदान-प्रदान ─ डेटा और
संचार सुरक्षा
भाग 13 मानकों और ज जनदिे ों में
िाजमल दकए जाने ाले सुरक्षा ज र्यों
पर ददिाजनदिे
इन मानकों की प्रजतया ाँ भारतीय मानक ब्यरू ो, मानक भ न, 9 बहादरु िाह िफर माग,भ नई ददल्ली 110002, क्षेत्रीय
कायाभलयों:कोलकाता, चंडीगढ़, चेन्नई, मुम्बई तथा िाखा कायाभलयों : अहमदाबाद, बेंगलुरु, भोपाल, भुबनेश्वर, कोयम्बटूर,
देहरादनू , फरीदाबाद, गाजियाबाद, गु ाहाटी, हदै राबाद, जयपुर, जम् म ू , जमिेदपुर, लखनऊ, नागपरु , पर ान,ू पटना,
पुण,े रायपुर, राजकोट, कोजच्च, ज िाखापटनम में जबक्री हते ु उप्लब्ध ह.ैं भारतीय मानकों को http://www.
standardsbis.in पर आनलाईन खरीदा/ डाउनलोड दकया जा सकता है।
ज.े राय चौधरी, ैज्ञाजनक जी ए ं उपमहाजनदेिक (मानकीकरण–पी ए ं एम)
[ज ज्ञापन-III/4/असा./264/2021-22]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 17th September, 2021
Ref: HQ-PUB013/1/2020-PUB-BIS (221).—In pursuance of Sub-rule (1) of Rule (15) of the
Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian
standards, particulars of which are given in the second column of the schedule hereto annexed have been
established on the date indicated against it in third column. The particulars of the standards, if any which
are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date
indicated against them in the fifth column.8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
SCHEDULE
Sl No., Year & Title of the Indian Standards Date of No., Year & Title of the Date of
No. Established Establishment Indian Standards to be withdrawal
withdrawn, if any
(1) (2) (3) (4) (5)
1 IS 40 : 2021 14 Sept 2021 IS 40 : 1971 15 Oct 2021
Carbon Black for Paints ─ Specification Specification for Carbon
(Second Revision) Black for Paints
(First Revision)
2.
IS 3400 (Part 11) : 2021/ISO 4662 : 2017 14 Sept 2021 IS 3400 (Part 11) : 1985 15 Oct 2021
Methods of Test for Vulcanized Rubber Methods of Test for
Part 11 Determination of Rebound Vulcanized Rubber
Resilience Part 11 Determination of
(Second Revision) Rebound Resilience
(First Revision)
3
IS 10318 (Part 2) : 2021/ISO 5673-2 : 2005 14 Sept 2021 IS 10318 : 2002/ISO 5673 : 15 Oct 2021
Agricultural Tractors and Machinery ─ 1993
Power Take-off Drive Shafts and Power – Agricultural Tractors and
input Connection Machinery ─ Power Take-
Part 2 Specification for Use of PTO Drive off Drive Shafts and
Shafts, and Position and Clearance of PTO Position of Power –input
Drive Line and PIC for Various Connection
Attachments (First Revision)
(Second Revision)
4
IS 14172 : 2021/ISO/IEC 7810 : 2003 14 Sept 2021 IS 14172 :1994 15 Oct 2021
Identification Cards ─ Physical Identification Cards ─
Characteristics Physical Characteristics
(First Revision)
5
IS 17664 : 2021/ISO 20419 : 2018 14 Sept 2021 NA NA
Treated Wastewater Reuse for Irrigation ─
Guidelines for the Adaptation of Irrigation
Systems and Practices to Treated
Wastewater
6 IS 17665 (Part 1) : 2021/ISO 20468-1 : 14 Sept 2021 NA NA
2018
Guidelines for Performance Evaluation of
Treatment Technologies for Water Reuse
Systems
Part 1 General
7
IS 17665 (Part 2) : 2021/ISO 20468-2 : 14 Sept 2021 NA NA
2019
Guidelines for Performance Evaluation of
Treatment Technologies for Water Reuse
Systems
Part 2 Methodology to Evaluate
Performance of Treatment Systems on the
Basis of Greenhouse Gas Emissions[भाग III—खण् ड 4] भारत का राजपत्र : असाधारण 9
8
IS 17666 (Part 1) : 2021/ISO 21939-1 : 14 Sept 2021 NA NA
2019
A Method to Calculate and Express Energy
Consumption of Industrial Wastewater
Treatment for the Purpose of Water Reuse
Part 1 Biological Processes
9 IS/ISO/IEC 29192-6 : 2019 14 Sept 2021 NA NA
Information Technology ─ Lightweight
Cryptography
Part 6 Message Authentication Codes
(MAC’s)
10 IS/IEC 60297-3-101 : 2004 14 Sept 2021 IS 11719 (Part 2/Sec 1) : 15 Oct 2021
Mechanical Structures for Electronic 1986
Equipment Dimensions of Mechanical
Part 3 Dimensions of Mechanical Structures Structures of the 482’6 mm
of the 482.6 mm (19 in) Series Series
Section 101 Subracks and Associated Plug- Part 2 Subracks and
in units Associated Plug-in units
Section 1 Subracks
IS 11719 (Part 2/Sec 2) :
1986
Dimensions of Mechanical
Structures of the 482’6 mm
Series
Part 2 Subracks and
Associated Plug-in units
Section 2 Plug-in units
11 IS/IEC 60603-3 : 1987 14 Sept 2021 NA NA
Connectors for Frequencies below 3 MHz
for Use with Printed Boards
Part 3 Two-Part Connectors for Printed
Boards Having Contacts Spaced at 2.54 mm
(0.100 in) Centres and Staggered
Terminations at that Same Spacing
12 IS/IEC 60603-6 : 1987 14 Sept 2021 NA NA
Connectors for Frequencies below 3 MHz
for Use with Printed Boards
Part 6 Edge-Socket Connectors and Printed-
Board Connectors with 2.54 mm (0.1 in)
Contact Spacing for Single or Double-Sided
Printed Boards of 1.6 mm (0.063 in)
Nominal Thickness
13 IS/IEC 60603-8 : 1990 14 Sept 2021 NA NA
Connectors for Frequencies Below 3 MHz
for Use with Printed Boards
Part 8 Two-part Connectors for Printed
Boards for Basic Grid of 2.54 mm (0,1 in),
with Square Male Contacts of 0.63 mm x
0.63 mm10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
14 IS/IEC 60603-11 : 1992 14 Sept 2021 NA NA
Connectors for Frequencies below 3 MHz
for use with Printed Boards
Part 11 Detail Specification for Concentric
Connectors (Dimensions for Free
Connectors and Fixed Connectors)
15 IS/IEC 60603-13 : 1995 14 Sept 2021 NA NA
Connectors for Frequencies Below 3 MHz
for Use with Printed Boards
Part 13 Detail Specification for Two-part
Connectors of Assessed Quality, for Printed
Boards for Basic Grid of 2.54 mm (0.1 in),
with Free Connectors for Non-accessible
Insulation Displacement Terminations (ID)
16 IS/IEC 60603-14 : 1998 14 Sept 2021 NA NA
Connectors for Frequencies Below 3 MHz
for use with Printed Boards
Part 14 Detail Specification for Circular
Connectors for Low-Frequency Audio and
Video Applications Such as Audio, Video
and Audio-visual Equipment
17 IS/IEC 60915 : 2006 14 Sept 2021 IS 4586 (Part II/Sec 2) : 15 Oct 2021
Capacitors and Resistors for Use in 1980
Electronic Equipment Preferred Dimensions Dimensions of Spindles and
of Shaft Ends Bushes and for the Mounting Mounting Arrangements for
of Single-hole Bush-mounted Shaft- Spindle Operated Electronic
operated Electronic Components Components
Part II Mounting
Arrangements
Section 2 Fixing Nuts
(First Revision)
18 IS/IEC 61020-1 : 2019 14 Sept 2021 IS QC 960000 : 1995/IEC 15 Oct 2021
Electromechanical Switches for Use in QC 960000 : 1991
Electrical and Electronic Equipment Electromechanical Switches
Part 1 Generic Specification for Use in Electrical and
Electronic Equipment
Part 1 Generic Specification
19 IS/IEC 61076-4-100 : 2001 14 Sept 2021 NA NA
Connectors for Electronic Equipment
Part 4 Printed Board Connectors with
Assessed Quality
Section 100 Detail Specification for two-
part Connector Modules having a grid of 2.5
mm for Printed Boards and Backplanes
20 IS/IEC 61076-4-102 : 1997 14 Sept 2021 NA NA
Connectors with Assessed Quality for Use
in d.c., Low-Frequency Analogue and in
Digital High Speed Data Applications[भाग III—खण् ड 4] भारत का राजपत्र : असाधारण 11
Part 4 Printed Board Connectors
Section 102 Detail Specification for two-
part Single-Pole Connectors, for multiple
uses on plug-in units,with pre-centring,
coding and early mating features, having a
metric grid in accordance with IEC 60917
21 IS/IEC 61076-4-103 : 1999 14 Sept 2021 NA NA
Connectors for Use in d.c. Low-frequency
Analogue and Digital High-Speed Data
Applications
Part 4 Printed Board Connectors with
Assessed Quality
Section 103 Detail Specification for Two-
part Connectors with Shielding and a Basic
Grid of 2.5 mm
22 IS/IEC 61076-4-104 : 1999 14 Sept 2021 NA NA
Connectors for Use in d.c. Low-Frequency
Analogue and Digital High-Speed Data
Applications
Part 4 Printed Board Connectors with
Assessed Quality
Section 104 Detail Specification for Two-
Part Modular Connectors, Basic Grid of 2.0
mm, with Terminations on a Multiple Grid
of 0.5 mm
23 IS/IEC 61076-4-115 : 2003 14 Sept 2021 NA NA
Connectors for Electronic Equipment
Part 4 Printed Board Connectors
Section 115 Backplane Connector for
InfiniBand Equipment
24 IS/IEC 62209-2 : 2019 14 Sept 2021 IS/IEC 62209-2 : 2010 15 Oct 2021
Human Exposure to Radio Frequency Fields Human Exposure to Radio
from Hand-Held and Body ─ Mounted Frequency Fields from
Wireless Communication Devices ─ Human Hand-Held and Body ─
Models, Instrumentation and Procedures Mounted Wireless
Part 2 Procedure to Determine the Specific Communication Devices ─
Absorption Rate (SAR) for Wireless Human Models,
Communication Devices Used in Close Instrumentation and
Proximity to the Human Body (Frequency Procedures
Range of 30 MHz to 6 GHz) Part 2 Procedure to
(First Revision) Determine the Specific
Absorption Rate (SAR) for
Wireless Communication
Devices Used in Close
Proximity to the Human
Body (Frequency Range of
30 MHz to 6 GHz)
25 IS/IEC 62209-3 : 2019 14 Sept 2021 NA NA
Measurement Procedure for the Assessment
of Specific Absorption Rate of Human
Exposure to Radio Frequency Fields from
Hand-held and Body-mounted Wireless12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Communication Devices
Part 3 Vector Measurement-based Systems
(Frequency range of 600 MHz to 6 GHz)
26 IS/IEC 62271-102 : 2018 14 Sept 2021 IS/IEC 62271-102 : 2003 15 Oct 2021
High-Voltage Switchgear and Controlgear High-Voltage Switchgear
Part 102 Alternating Current Disconnectors and Controlgear
and Earthing Switches Part 102 Alternating Current
(First Revision) Disconnectors and Earthing
Switches
27 IS/IEC 62351-11 : 2016 14 Sept 2021 NA NA
Power Systems Management and
Associated Information Exchange ─ Data
and Communications Security
Part 11 Security for XML Documents
28 IS/IEC TR 62351-13 : 2016 14 Sept 2021 NA NA
Power Systems Management and
Associated Information Exchange ─ Data
and Communications Security
Part 13 Guidelines on Security Topics to be
Covered in Standards and Specifications
Copies of these standards are available for sale with Bureau of Indian Standards, Manak Bhavan, 9 Bahadur
Shah Zafar Marg, New Delhi – 110 002; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and
Branch Offices: Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Dehradun, Faridabad,
Ghaziabad, Guwahati, Hyderabad, Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur, Parwanoo, Patna, Pune,
Raipur, Rajkot, Kochi, Vishakhapatanam. Online purchase/downloading of Indian Standards can be made
at http://www.standardsbis.in.
J. ROY CHOWDHURY, Scientist G & DDG (Standardization –P&M)
[ADVT.-III/4/Exty./264/2021-22]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.