See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-28012025-260524
CG-DLx-xEx-G2I8D0H1x2x0x2 5-260524
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग II—खण्ड 3—उप-खण्ड (ii)
PART II—Section 3—Sub-section (ii)
प्राजधकार स े प्रकाजित
PUBLISHED BY AUTHORITY
स.ं 488] नई ददल्ली, सोमवार, िनवरी 27, 2025/ माघ 7, 1946
No. 488] NEW DELHI, MONDAY, JANUARY 27, 2025/MAGAHA 7, 1946
नवीन एव ंनवीकरणीय ऊिा ामत्रं ालय
आदेि
नई ददल्ली, 27 िनवरी, 2025
का.आ. 492(अ).—भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 17 और धारा 25
की उप-धारा (3) के साथ पठित धारा 16 की उप-धारा (1) तथा (2) द्वारा प्रदत्त िजियों का प्रयोग करत े हुए और सौर
फोटोवोल्टेइक प्रणाजलयां, उपकरण और संघटक माल (अजनवाया रजिस्ट्रीकरण के जलए आवश्यकताएं) आदेि, 2017 के
अजधक्रमण म,ें ऐसे अजधक्रमण से पूवा दकए गए या लोजपत जवषयों को छोड़कर, भारतीय मानक ब्यूरो से परामिा के पश्चात,
केन्द्रीय सरकार का यह मत ह ैदक िनजहत म ेंऐसा करना आवश्यक या उजित ह,ै एतद्द्वारा जनम्नजलजखत आदेि िारी करती ह:ै
2. सजं िप्त िीषका और प्रारंभ - (1) इस आदेि का नाम “सौर प्रणाजलयां, उपकरण तथा संघटक माल आदिे , 2025” होगा।
(2) यह सरकारी रािपत्र में इसके प्रकािन की जतजथ से 180 ददनों की समाजप्त पर प्रवृत्त होगा।
3. पठरभाषाएं- (1) इस आदिे में, िब तक दक संदभा स ेअन्द्यथा अपेजित न हो -
(क) “अजधजनयम” स ेभारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) अजभप्रेत ह।ै
694 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
(ख) "समुजित प्राजधकारी" का अथ ा ह ै सजिव, नवीन एव ं नवीकरणीय ऊिा ा मंत्रालय, भारत सरकार द्वारा प्राजधकृत नवीन एवं
नवीकरणीय ऊिा ा मंत्रालय या उसके अधीनस्ट्थ या संबद्ध कायाालयों से कोई भी अजधकारी, िो जनदेिक या वैज्ञाजनक 'ई' स्ट्तर
से कम का न हो।
(2) इन िब्दों और पदों को, िो यहां प्रयुि ह ैं और पठरभाजषत नहीं ह ैं परंत ु उस आधार पर बनाए गए अजधजनयम और
जवजनयमों में पठरभाजषत ह,ैं का क्रमिः वही अथा होगा िो इसके अंतगात बनाए गए अजधजनयम और जवजनयमों में ह।ै
4. मानक स े अनरूु पता और मानक जिह्न का अजनवाय ा उपयोग - नीिे दी गई ताजलका के कॉलम (2) म ें जनर्दाष्ट माल या वस्ट्त ु
उि ताजलका के कॉलम (3) में ददए गए सगं त भारतीय मानक के अनरूु प होंग े और भारतीय मानक ब्यरू ो (अनुरूपता
मूल्यांकन) जवजनयम, 2018 की योिना-II के अनुसार ब्यरू ो से लाइसेंस के तहत 'मानक जिह्न' धारण करेंग:े
बिते दक इस आदेि में कुछ भी माल या वस्ट्तु पर लाग ू नहीं होगा, िैसा दक जनयाात के जलए उि ताजलका के कॉलम (2) म ें
जनर्दाष्ट ह।ै
5. प्रमाणन और प्रवतना - उि ताजलका के कॉलम (2) में जनर्दाष्ट माल या वस्ट्त ु के संबंध में, ब्यूरो, प्रमाणन और प्रवतना
प्राजधकारी होगा। उि ताजलका के कॉलम (2) म ें उजल्लजखत मानक जिह्न धाठरत माल या वस्ट्तु के जलए भारतीय मानक से
अनुरूपता सुजनजश्चत करन े के जलए बािार जनगरानी ब्यरू ो अथवा ब्यूरो द्वारा नवीन एवं नवीकरणीय ऊिा ा मंत्रालय के परामि ा
से अजधसूजित एिेंजसयों द्वारा की िाएगी।
6. सौर फोटोवोल्टेइक, प्रणाजलया,ं उपकरण और सघं टक माल (अजनवाय ा पिं ीकरण के जलए आवश्यकताएं) आदेि, 2017 के
साथ समवती प्रिलन - यह आदेि सौर फोटोवोल्टेइक, प्रणाजलयां, उपकरण और संघटक माल (अजनवाया पंिीकरण के जलए
आवश्यकताएं) आदेि, 2017 के प्रावधानों के अनुसार वैध लाइसेंस वाले मौिूदा माल या वस्ट्तुओं के लाइसेंस की वैधता को
प्रभाजवत नहीं करेगा तथा मानक जिह्न के उपयोग के जलए लाइसेंस का नया पंिीकरण या मिं ूरी तथा उनकी संबंजधत वधै ता
अवजध की समाजप्त के बाद पंिीकरण का नवीकरण, इस आदिे के प्रावधानों के अंतगात दकया िाएगा।
7. उल्लघं न पर िमु ाना ा - कोई भी व्यजि, िो इस आदेि के प्रावधानों का उल्लघं न करता ह,ै उि अजधजनयम के प्रावधानों के
तहत दडं नीय होगा।
8. जनदेि िारी करन े की िजि - समुजित प्राजधकारी, इस आदेि के प्रयोिनों को पूरा करन े के जलए आवश्यक समझी िान े
वाली िानकारी देन े के जलए माल या वस्ट्तुओं के जवजनमााण, आयात, जवतरण, जबक्री, दकराये, पट्टे, भडं ारण, माल या वस्ट्तओंु
की जबक्री के जलए प्रदिान में संजलप्त दकसी भी व्यजि को जनदेि िारी कर सकता ह।ै
9. जनदेिों का अनपु ालन - प्रत्येक व्यजि, जिसे इस आदेि के अधीन कोई जनदेि िारी दकया िाता ह,ै वह ऐसे जनदेि का
अनुपालन करेगा।
10. लाइससें प्रदान करना - इस आदिे के तहत लाइसेंस प्रदान करन े के प्रयोिन के जलए, (@मानक परीिण ितें अथाात ्
एसटीसी) मानदंड को जनधााठरत करन े अथाात मोनो दक्रस्ट्टेलाइन जसजलकॉन टेरेजस्ट्रयल फोटोवोल् टेइक (पीवी) मॉड्यूल (एसआई
वेफर आधाठरत) प्रौद्योजगकी एवं जथन-दफल्म टेरेजस्ट्रयल फोटोवोल् टेइक (पीवी) मॉड्यलू [Cd, Te, a-Si, Cu(In, Ga) (S,
Se)2] प्रौद्योजगकी के जलए 18% की दिता (@ एसटीसी) तथा पोली दक्रस्ट्टेलाइन जसजलकॉन टेरेजस्ट्रयल फोटोवोल् टेइक
(पीवी) मॉड्यलू (एसआई वेफर आधाठरत) प्रौद्योजगकी के जलए 17% की दिता (@ एसटीसी) न्द्यूनतम दिता के जलए ित ा
लाग ू की गई ह।ै सौर पीवी मॉड्यूल की दिता (@ एसटीसी % में) की गणना “मॉड्यूल के अजधकतम पीवी आउटपुट के
फोटोवोल् टेइक मॉड्यूल के आगे की सतह के िेत्रफल के अनुपात के रूप में की िाएगी िैसा दक इसके बाहरी दकनारों (m2 म)ें
और 1000, अथाात दिता (@ एसटीसी % में)=[Pmax (वाट में)/{1000xA (m2 म)ें }] x100 द्वारा पठरभाजषत दकया गया
ह”ै । मॉड्यलू के अजधकतम पीवी आउटपुट और िेत्रफल को एसटीसी में आईएस 14286 में गणना के अनुसार उजल्लजखत दकया
िाएगा।[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 3
ताजलका
क्रम माल या वस्ट्त ु भारतीय मानक भारतीय मानक का िीषका
स.ं
(1) (2) (3) (4)
1. दक्रस्ट् टेलाइन IS 14286 (भाग-1): टेरेजस्ट्रयल फोटोवोल् टेइक (पीवी) मॉड्यूल – जडिाइन
जसजलकॉन टेरेजस्ट्रयल योग् यता और प्रकार अनुमोदन भाग 1 परीिण आवश्कताए ं
2023/IEC 61215-1:
फोटोवोल् टेइक (पीवी)
2021
मॉड्यूल (एसआई
वेफर आधाठरत) IS 14286 (भाग-1/खंड-1): टेरेजस्ट्रयल फोटोवोल् टेइक (पीवी) मॉड्यूल – जडिाइन
योग्यता और प्रकार अनुमोदनः भाग 1 परीिण की
2023/IEC 61215-1-1:
आवश्यकताएं: दक्रस्ट् टेलाइन जसजलकॉन फोटोवोल् टेइक (पीवी)
2021
मॉड्यूलों के परीिण के जलए खडं 1 जवजिष्ट आवश्यकताए ं
IS/IEC 61730-1: 2016 फोटोवोल् टेइक (पीवी) मॉड्यलू सरु िा योग् यता भाग 1
जनमााण के जलए आवश्कताएं
IS/IEC 61730-2: 2016 फोटोवोल् टेइक (पीवी) मॉड्यलू सुरिा पात्रता भाग 2
(परीिण के जलए) आवश्यकताए ं
2. जथन दफल्म टेरेजस्ट्रयल IS 14286 (भाग-1): 2023/ टेरेजस्ट्रयल फोटोवोल् टेइक (पीवी) मॉड्यूल - जडिाइन
फोटोवोल् टेइक (पीवी) योग्यता और प्रकार अनमु ोदन: भाग 1 परीिण
IEC 61215-1: 2021
मॉड्यूल [CdTe, a- आवश्यकताए ं
Si, Cu (In,Ga) IS 14286 (भाग-1/खंड-2): टेरेजस्ट्रयल फोटोवोल् टेइक (पीवी) मॉड्यूल - जडिाइन
योग्यता और प्रकार अनुमोदन
(S,Se) ]
2 2023/ IEC 61215-1-2:
भाग-1 परीिण आवश् यकताएं खंड-2 जथन-दफल् म कैडजमयम
2021 + Amd-1:2022
टेल् यरू ाइड (CdTe) आधाठरत फोटोवोल् टेइक (पीवी)
माड्यूलों के परीिण के जलए जविेष आवश् यकताए ं
IS 14286 (भाग-1/खंड-3): टेरेजस्ट्रयल फोटोवोल् टेइक (पीवी) मॉड्यूल - जडिाइन
योग्यता और प्रकार अनुमोदन
2023/ IEC 61215-1-3:
भाग 1 परीिण आवश्यकताए ँ खंड-3 जथन दफल्म एमोफास
2021 + Amd-1:2022
जसजलकॉन आधाठरत फोटोवोल् टेइक (पीवी) मॉड्यलू ों के
परीिण के जलए जविेष आवश्यकताएं
IS 14286 (भाग-1/खंड-4): टेरेजस्ट्रयल फोटोवोल्टेइक (पीवी) मॉड्यूल - जडिाइन
योग्यता और प्रकार अनुमोदन भाग 1 परीिण आवश्यकताए ं
2023/ IEC 61215-1-4:
खंड-4 जथन-दफल्म Cu(In,Ga)(S,Se)2 आधाठरत
2021 + Amd-1:2022
फोटोवोल् टेइक (पीवी) मॉड्यूलों के परीिण के जलए जविेष
आवश्यकताए ं
IS/IEC 61730-1: 2016 फोटोवोल् टेइक (पीवी) मॉड्यलू सरु िा योग्यता भाग 1
जनमााण के जलए आवश्यकताए ं
IS/IEC 61730-2: 2016 फोटोवोल् टेइक (पीवी) मॉड्यलू सरु िा योग्यता भाग 2
परीिण के जलए आवश्यकताए ं
सौर फोटोवोल् टेइक अनुप्रयोग के जलए सेकन्द् डरी सले और
3. भंडारण बैटरी IS 16270: 2023
बैटठरयां - सामान्द्य आवश्यकताएं और परीिण के तरीके
4. फोटोवोल् टेइक जवद्युत IS 16221 (भाग-2): 2015/ फोटोवोल् टेइक जवद्युत प्रणाजलयों में उपयोग के जलए जवद्युत
प्रणाली म ें उपयोग के कन्द् वटारों की सुरिा भाग 2 इन्द् वटारों के जलए जविेष
IEC 62109-2: 2011
जलए जवद्युत इन्द् वटार आवश् यकताए ं4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
IS/IEC 61683: 1999 फोटोवोल् टेइक प्रणाजलयां - पावर कंडीिनर - दिता मापने
के जलए प्रदक्रया
5. यूठटजलटी– IS 16221 (भाग-2): 2015/ फोटोवोल् टेइक जवद्युत प्रणाजलयों में उपयोग के जलए जवद्युत
कन्द् वटारों की सुरिा भाग 2 इन्द् वटारों के जलए जविेष
इंटरकनेक्ट ड IEC 62109-2: 2011
आवश् यकताए ं
फोटोवोल् टेइक इन्द् वटार
IS 16169: 2019/ IEC यूठटजलटी–इंटरकनेक्ट ड फोटोवोल् टेइक इनवटारों के जलए
62116: 2014 आइलैंडडंग रोकथाम उपायों की परीिण प्रदक्रया
IS 17980: 2022/IEC जिड-कनेक् टड फोटोवोल् टेइक इन्द् वटारों की अजधकतम पावर
पोइंट रेककंग दिता
62891:2020
ठटप्पणी: ताजलका के प्रयोिनाथा, भारतीय मानक के नवीनतम संस्ट्करण, जिसमें िारी दकए गए और ब्यूरो द्वारा समय-समय
पर अजधसूजित संिोधन िाजमल ह,ैं ऐसी अजधसूिना के प्रकािन की जतजथ से लाग ूहोंगे।
[फा. स.ं 313-12/5/2022-एस एंड क्यूसी]
डॉ. ए. के. जत्रपािी, सलाहकार/वैज्ञाजनक-िी
MINISTRY OF NEW AND RENEWABLE ENERGY
ORDER
New Delhi, the 27th January, 2025
S.O. 492(E).—In exercise of the powers conferred by sub-sections (1) and (2) of section 16
read with section 17 and sub-section (3) of section 25 of the Bureau of Indian Standards Act, 2016
(11 of 2016) and in supersession of the Solar Photovoltaics, Systems, Devices and Components
Goods (Requirements for Compulsory Registration) Order, 2017, except as respects things done or
omitted to be done before such supersession, the Central Government after consulting the Bureau of
Indian Standards, is of the opinion that it is necessary or expedient so to do in the public interest,
hereby makes the following Order, namely:-
2. Short title and commencement- (1) This Order may be called the “Solar Systems, Devices and
Components Goods Order, 2025”.
(2) It shall come into force on the expiry of one hundred and eighty days from the date of its
publication in the Official Gazette.
3. Definitions- (1) In this Order, unless the context otherwise requires –
(a) “Act” means the Bureau of Indian Standards Act, 2016 (11 of 2016);
(b) “appropriate authority” means any officer, not below the rank of Director or Scientist ‘E’ of the
Ministry of New and Renewable Energy or its sub-ordinate or attached offices, authorised by the
Secretary, Ministry of New and Renewable Energy, Government of India;[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 5
(2) Words and expressions used herein and not defined but defined in the Act and Regulations made
thereunder, shall have the meanings respectively assigned to them in the Act and Regulations.
4. Conformity to the standard and compulsory use of standard mark- Goods or article specified
in column (2) of the Table below shall conform to the corresponding Indian Standard given in
column (3) of the said Table and shall bear the ‘Standard Mark’ under a licence from the Bureau as
per the Scheme-II of the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018:
Provided that nothing in this Order shall apply to goods or article, as specified in column (2) of the
said Table meant for export.
5. Certification and enforcement- In respect of the goods or article specified in column (2) of the
said Table, the Bureau shall be the certifying and enforcing authority. The market surveillance to
ensure the conformity to Indian Standard for goods or article bearing Standard Mark mentioned in
column (2) of the said Table shall be conducted by the Bureau or Agencies notified by the Bureau in
consultation with the Ministry of New and Renewable Energy.
6. Concurrent running with the Solar Photovoltaics, Systems, Devices and Components Goods
(Requirements for Compulsory Registration) Order, 2017- This Order shall not affect the validity
of the licence of existing goods or article having valid licence as per the provisions of Solar
Photovoltaics, Systems, Devices and Components Goods (Requirements for Compulsory
Registration) Order, 2017 and the fresh registration or grant of licence to use standards mark and
renewal of registration after expiry of their respective validity period shall be done under the
provisions of this Order.
7. Penalty for contravention- Any person who contravenes the provisions of this Order shall be
punishable under the provisions of the said Act.
8. Power to issue directions- The appropriate authority may issue directions to any person engaged
in the manufacture, import, distribution, sale, hire, lease, storage, or exhibit for sale of the goods or
articles to give information as deemed necessary, for carrying out the purposes of this Order.
9. Compliance of directions- Every person to whom any direction is issued under this Order shall
comply with such direction.
10. Grant of licence-For the purpose of grant of licence under this Order, a condition is introduced
to set minimum efficiency (@ Standard Test Conditions i.e., STC) criteria, i.e., efficiency (@STC)
of 18% for Mono Crystalline Silicon Terrestrial Photovoltaic (PV) modules (Si wafer based)
technology & Thin-Film Terrestrial Photovoltaic (PV) Modules [Cd Te, a-Si, Cu(In, Ga)(S, Se)2]
technology and efficiency (@STC) of 17% for Poly Crystalline Silicon Terrestrial Photovoltaic (PV)
modules (Si wafer based) technology. The efficiency (@ STC in %) of Solar PV module shall be
calculated as “ratio of maximum PV output of the module to the Area of the front surface of a
photovoltaic module as defined by its outer edges (in m2) and 1000 i.e., 𝐸𝑓𝑓𝑖𝑐𝑖𝑒𝑛𝑐𝑦 (@ STC in %)
= [𝑃𝑚𝑎𝑥 (in Watt)/{1000×𝐴 (in m2)}] ×100.” The maximum PV output and area of the module shall
be referred as calculated in IS 14286 at STC.6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
Table
S. Goods or articles Indian Standard Title of Indian Standard
No.
(1) (2) (3) (4)
1. Crystalline IS 14286 (Part 1) : Terrestrial Photovoltaic (PV) Modules - Design
Silicon Terrestrial 2023/ IEC 61215-1 Qualification and Type Approval Part 1 Test
Photovoltaic (PV) : 2021 Requirements
modules IS 14286 (Part Terrestrial Photovoltaic (PV) Modules - Design
(Si wafer based) 1/Sec 1) : 2023/ IEC Qualification and Type Approval: Part 1 Test
61215-1-1: 2021 Requirements: Sec 1 Special requirements for
testing of crystalline silicon photovoltaic (PV)
modules.
IS/IEC 61730-1 : Photovoltaic (PV) Module Safety Qualification
2016 Part 1 Requirements for Construction
IS/IEC 61730-2 : Photovoltaic (PV) Module Safety Qualification
2016 Part 2 Requirements for Testing
2. Thin-Film IS 14286 (Part 1) : Terrestrial Photovoltaic (PV) modules - Design
Terrestrial 2023/ IEC 61215-1 qualification and type approval: Part 1 test
Photovoltaic (PV) : 2021 requirements.
Modules [CdTe, IS 14286 (Part Terrestrial Photovoltaic (PV) Modules - Design
a-Si, 1/Sec 2): 2023/ IEC Qualification and Type Approval
Cu(In,Ga)(S,Se) ] 61215-1-2: 2021 + Part 1 Test Requirements Section 2 Special
2
Amd-1:2022 requirements for testing of thin-film cadmium
telluride (CdTe) based photovoltaic (PV)
modules
IS 14286 (Part Terrestrial Photovoltaic (PV) Modules - Design
1/Sec 3 ) : 2023/ Qualification and Type Approval
IEC 61215-1-3 : Part 1 Test Requirements Section 3 Special
2021 + Amd-1:2022 requirements for testing of thin-film amorphous
silicon based photovoltaic (PV) modules
IS 14286 (Part Terrestrial Photovoltaic (PV) Modules - Design
1/Sec 4): 2023/ IEC Qualification and Type Approval Part 1 Test
61215-1-4: 2021 + Requirements Section 4 Special requirements for
Amd-1:2022 testing of thin-film Cu (In,Ga)(S,Se)2 based
photovoltaic (PV) modules
IS/IEC 61730-1: Photovoltaic (PV) Module Safety Qualification
2016 Part 1 Requirements for Construction
IS/IEC 61730-2: Photovoltaic (PV) Module Safety Qualification
2016 Part 2 Requirements for Testing
Secondary Cells and Batteries for Solar
3. Storage Battery IS 16270: 2023 Photovoltaic Application — General
Requirements and Methods of Test
4. Power inverters IS 16221 (Part 2): Safety of Power Converters for Use in
for use in 2015/ IEC 62109-2: Photovoltaic Power Systems Part 2 Particular
photovoltaic 2011 Requirements for Inverters
power system IS/IEC 61683: 1999 Photovoltaic systems - Power conditioners -[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 7
Procedure for measuring efficiency
5. Utility- IS 16221 (Part 2): Safety of Power Converters for Use in
Interconnected 2015/ IEC 62109-2: Photovoltaic Power Systems Part 2 Particular
Photovoltaic 2011 Requirements for Inverters
Inverters IS 16169: 2019/ Test Procedure of Islanding Prevention Measures
IEC 62116: 2014 for Utility-Interconnected Photovoltaic Inverters.
IS 17980: 2022/IEC Maximum Power Point Tracking Efficiency of
62891:2020 Grid Connected Photovoltaic Inverters
Note: For the purpose of the Table, the latest version of Indian Standard including the amendments
issued thereof and notified by the Bureau from time to time, shall apply from the date of such
notification.
[F.No. 313-12/5/2022-S AND QC]
Dr A. K. TRIPATHI, Adviser/Scientist-G
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.