Home› India› Ministry of Commerce and Industry› Notifying of Amendment in Plywood and Wooden flush door shut...
Date: 15-Mar-2024 Category: Extra Ordinary State: Union Government Country: India

Notifying of Amendment in Plywood and Wooden flush door shutters (Quality Control) Order, 2024

Issued by Ministry of Commerce and Industry · DEPARTMENT FOR PROMOTION OF INDUSTRY AND INTERNAL TRADE

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

What it means

  • The gazette notification introduces the Plywood and Wooden flush door shutters (Quality Control) Order, 2024, which mandates compliance with specified Indian Standards and the use of the Standard Mark under a license from the Bureau of Indian Standards (BIS) for the manufacture of plywood and wooden flush door shutters.
  • This order supersedes the Plywood and Wooden flush door shutters (Quality Control) Order, 2023, except for actions taken or omitted before the supersession.

Key Changes

  • The order comes into effect on February 28, 2025.
  • For small enterprises, as defined under the Micro, Small and Medium Enterprises Development Act, 2006, the order will be effective from May 28, 2025.
  • For micro enterprises, as defined under the Micro, Small and Medium Enterprises Development Act, 2006, the order will be effective from August 28, 2025.
  • The order mandates that goods specified in the table must conform to the corresponding Indian Standards and bear the Standard Mark under a license from BIS as per Scheme-1 of Schedule-II of the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018.
  • The Bureau of Indian Standards (BIS) is designated as the certifying and enforcing authority.
  • The order does not apply to goods or articles manufactured domestically meant for export.
  • Violation of the order's provisions will result in penalties under the Bureau of Indian Standards Act, 2016.
  • The table lists specific goods (Plywood and Wooden flush door shutters) along with their corresponding Indian Standards:
  • Plywood for general purposes (IS 303:1989)
  • Wooden flush door shutters (solid core type) - Plywood face panels (IS 2202 (Part 1):1999)
  • Marine plywood (IS 710:2010)
  • Fire retardant plywood (IS 5509:2021)
  • Veneered decorative plywood (IS 1328:1996)
  • Wooden flush door shutters (cellular and hollow core type) - Particle board and hardboard face panels (IS 2191 (Part 2):2022)
  • Wooden flush door shutters (cellular and hollow core type) - Plywood face panels (IS 2191 (Part 1):2022)
  • Wooden Flush Door Shutters (Solid core type) — Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels (IS 2202(Part 2): 2022)
  • Plywood for concrete shuttering works - Specification (IS 4990: 2011)
  • Structural plywood - Specification (IS 10701: 2012)
  • The latest versions of Indian Standards, including amendments notified by the Bureau from time to time, will apply.

Impact Analysis

Manufacturers of Plywood and Wooden Flush Door Shutters

  • Action Items: Plan and budget for compliance costs, including testing and certification fees.

Small and Micro Enterprises

  • Action Items: Explore options for financial assistance or subsidies to support compliance efforts.

Bureau of Indian Standards (BIS)

  • Action Items: Strengthen enforcement mechanisms to ensure compliance.

Consumers

  • Action Items: Be aware of the requirements and benefits of the Quality Control Order.

Exporters

  • Action Items: Ensure compliance with export regulations and standards relevant to the destination country.

Key Entities Referenced

Bureau of Indian Standards (BIS): The national standards body of India responsible for formulating and promoting standards. Micro, Small and Medium Enterprises Development Act, 2006: An Act to facilitate the promotion and development and enhance the competitiveness of micro, small and medium enterprises. Plywood and Wooden flush door shutters (Quality Control) Order, 2024: An order issued by the Ministry of Commerce and Industry mandating compliance with Indian Standards for plywood and wooden flush door shutters. Plywood and Wooden flush door shutters (Quality Control) Order, 2023: The order that is superseded by the 2024 order.
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 सी.जी.-डी.एल.-अ.-15032024-253067 CG-DxLx-xEG-I1D5H0x3x2x0 24-253067 xxxGIDExxx असाधारण EXTRAORDINARY भाग II—खण् ड 3—उप-खण्ड (ii) PART II—Section 3—Sub-section (ii) प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 1311] नई ददल्ली, िुक्रवार, मार्ध 15, 2024/फाल्ग नु 25, 1945 No. 1311] NEW DELHI, FRIDAY, MARCH 15, 2024/PHALGUNA 25, 1945 वाजणज्य और उद्योग मंत्रालय (उद्योग संवधनध और आतं ररक व्यापार जवभाग) आदेि नई ददल्ली, 15 मार्ध, 2024 का.आ. 1377(अ).—भारतीय मानक ब्यरू ो अजधजनयम, 2016 (2016 का 11) की धारा 16 के साथ परित धारा 17 और धारा 25 की उप धारा (3) द्वारा प्रदत्त िजियों का प्रयोग करत े हुए तथा को प्लाईवुड और लकडी के फ्लि डोर िटर (गुणवत्ता जनयंत्रण) आदेि, 2023 का अजधक्रमण करते हुए, जसवाय ऐस े कायों के संबंध म ें िो ऐस े अजधक्रमण स े पहल े दकए गए या जिनके दकए िाने स े छूट प्रदान दकया गया, केंद्र सरकार का यह मत ह ै दक यह िनजहत म ें आवश्यक अथवा जहतकर ह,ै अत: एतद्द्वारा जनम्नजलजखत आदेि करती ह,ै नामत: - 1.सजं िप्त िीर्कध और प्रारंभ.-(1) इस आदेि को प्लाईवुड और लकडी के फ्लि डोर िटर (गुणवत्ता जनयंत्रण) आदेि, 2024 कहा िाएगा। (2) यह आदेि 28 फरवरी, 2025 से लाग ू होगा: बिते दक लघ ु उद्यमों के जलए, िैसा दक सूक्ष्म, लघ ु और मध्यम उद्यम जवकास अजधजनयम, 2006 (2006 का 27) म ें पररभाजर्त दकया गया ह,ै यह आदेि 28 मई , 2025 स ेलाग ू होगा। बिते यह भी दक सूक्ष्म उद्यमों के जलए, िैसा दक सूक्ष्म, लघ ु और मध्यम उद्यम जवकास अजधजनयम, 2006 (2006 का 27) म ेंपररभाजर्त दकया गया ह,ै यह आदिे 28 अगस्ट्त , 2025 से लाग ू होगा। 1978 GI/2024 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 2. मानक जर्ह्न का अजनवाय ध उपयोग.- ताजलका के कॉलम (1) म ें जवजनर्ददष्ट वस्ट्तुए ं या सामान उि ताजलका के कॉलम (2) म ें उजल्लजखतत दनुरूपी भारतीय मानक के अनुरूप होंगे तथा उनम ें भारतीय मानक ब्यूरो (अनुपालन मल्ू यांकन) जवजनयम, 2018 की अनुसूर्ी-II की स्ट्कीम-I के अनुसार ब्यरू ो के लाइसेंस के तहत मानक जर्ह्न लगा होगा। (2) बिते दक इस आदेि म ें से कुछ भी, जनयाधत की िाने वाली स्ट्वदेि म ें जवजनर्ममत वस्ट्तुओं या सामान पर लागू नहीं होगा। 3. प्रमाणन और प्रवतनध प्राजधकारी.- यह ब्यूरो ताजलका के कॉलम (1) म ें जवजनर्ददष्ट वस्ट्तओंु या सामान के जलए प्रमाणन और प्रवतधन प्राजधकरण होगा। 4. उल्लघं न के जलए पने ल्टी– इस आदिे के प्रावधानों का उल्लंघन करन े वाल े व्यजि को भारतीय मानक ब्यरू ो अजधजनयम, 2016 के प्रावधानों के तहत दंजडत दकया िाएगा। ताजलका वसत् ुया सामान भारतीय मानक भारतीय मानक का िीर्धक (1) (2) (3) प्लाईवुड और लकडी के फ्लि डोर 303:1989 सामान्य प्रयोिनों के जलए प्लाईवुड िटर 2202 (भाग1):1999 वडु ेन फ्लि डोर िटर (िोस प्रकार के)- प्लाईवुड फेस पैनल 710:2010 मरीन प्लाईवुड 5509:2021 अजिरोधी प्लाईवुड 1328:1996 साि-सज्जा वाले प्लाईवुड 2191 (भाग 2):2022 वुडेन फ्लि डोर िटर(सेलुलर और जछद्र वाले) – पार्टटकल बोडध और हाडधबोडध फेस पैनल 2191 (भाग 1):2022 वुडेन फ्लि डोर िटर (सेलुलर और जछद्र वाले) - प्लाईवुड फेस पैनल 2202(भाग 2): 2022 वुडन फ्लि डोर िटर (िोस प्रकार के) - पार्टटकल बोडध, हाई डेंजसटी फाइबर बोडध, मीजडयम डेंजसटी फाइबर बोडध और फाइबर हाडधबोडध फेस पैनल 4990: 2011 कंक्रीट िटररग कायों के जलए प्लाईवुड – जवजनदिे न 10701: 2012 स्ट्रक्र्रल प्लाईवुड – जवजनदिे न नोट: इस ताजलका के प्रयोिन के जलए, भारतीय मानकों के संबंध म ें िारी संिोधनों सजहत उनके नवीनतम संस्ट्करण, िैसादक ब्यूरो द्वारा समय-समय पर अजधसूजर्त दकए गए ह,ैं ऐसी अजधसूर्ना की तारीख स े लागू होंगे। [फा. स.ं पी-14031/9/2023-सीआई] संिीव, संयुि सजर्व MINISTRY OF COMMERCE AND INDUSTRY (Department for Promotion of Industry and Internal Trade) ORDER New Delhi, the 15th March, 2024 S.O. 1377(E).—In exercise of the powers conferred by section 16 read with section 17 and sub-section (3) of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016) and in supersession of the Plywood and Wooden flush door shutters (Quality Control) Order, 2023, except as respects things done or omitted to be done[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 3 before such supersession, the Central Government, is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order, namely:- 1.Short title and commencement. - (1) This order may be called the Plywood and Wooden flush door shutters (Quality Control) Order, 2024. (2) It shall come into force with effect from the 28th February,2025: Provided that in respect of small enterprise, as defined under the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006), it shall come into force with effect from the 28th May, 2025: Provided further that in respect of micro enterprises, as defined under the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006), it shall come into force with effect from the 28th August, 2025. 2. Compulsory use of Standard Marks.-Goods or articles specified in column (1) of the Table shall conform to the corresponding Indian Standard specified in column (2) of the Table and shall bear the Standard Mark under a licence from the Bureau as per Scheme-1 of Schedule-II of the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018: Provided that nothing in this order shall apply to goods or articles manufactured domestically meant for export. 3. Certification and enforcing authority.-The Bureau shall be the certifying and enforcing authority for the goods or articles specified in column (1) of the Table. 4. Penalty for contravention. - Any person who contravenes the provisions of this order shall be punishable under the provisions of the Bureau of Indian Standards Act, 2016. TABLE Goods or articles Indian Standard Title of Indian Standard (1) (2) (3) Plywood and Wooden 303:1989 Plywood for general purposes flush door shutters 2202 (Part 1):1999 Wooden flush door shutters (solid core type) - Plywood face panels 710:2010 Marine plywood 5509:2021 Fire retardant plywood 1328:1996 Veneered decorative plywood 2191 (Part 2):2022 Wooden flush door shutters (cellular and hollow core type) - Particle board and hardboard face panels , 2191 (Part 1):2022 Wooden flush door shutters (cellular and hollow core type) - Plywood face panels 2202(Part 2): 2022 Wooden Flush Door Shutters (Solid core type) — Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels 4990: 2011 Plywood for concrete shuttering works - Specification 10701: 2012 Structural plywood - Specification Note.- For the purposes of this Table, the latest version of Indian Standards including the amendments thereof, as notified by the Bureau from time to time shall apply. [F. No. P-14031/9/2023-CI] SANJIV, Jt. Secy. Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research

Related Documents from Ministry of Commerce and Industry