See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-16032024-253089
xxxGIDHxxx
CG-DLxx-xEG-I1D6E0x3x2x0 24-253089
असाधारण
EXTRAORDINARY
भाग II—खण् ड 3—उप-खण्ड (ii)
PART II—Section 3—Sub-section (ii)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 1356] नई ददल्ली, िुक्रवार, मार्ध 15, 2024/फाल्ग नु 25, 1945
No. 1356] NEW DELHI, FRIDAY, MARCH 15, 2024/PHALGUNA 25, 1945
वाजणज्य और उद्योग मत्रं ालय
(उद्योग संवधनध और आतं ररक व्य ापार जवभाग)
आदेि
नई ददल् ली, 15 मार्ध, 2024
का.आ. 1422(अ).—भारतीय मानक ब् यूरो अजधजनयम, 2016 (2016 का 11) की धारा 25 की उप-धारा (3) के
साथ परित धारा 16 की उप-धाराओं (1) और (2) द्वारा प्रदत् त िजियों का प्रयोग करते हुए तथा सभी रबड़ और पॉलीमर
सामग्री स े बन े फुटजवयर और इसके घटक (गुणवत् ता जनयंत्रण) आदिे , 2022, के अजधक्रमण म,ें जसवाय ऐसे कायों के िो
अजधक्रमण से पहले दकए गए अथवा जिन् ह ें दकए िाने से छोड़ ददया गया, केंद्र सरकार का ब् यूरो के साथ परामिध करने के बाद
यह मत ह दक यह िनजहत म ेंआवश् यक अथवा जहतकर ह, अत: एतद्द्वारा जनम्न जलजखत आदेि करती ह, नामत:
1. संजिप्त िी्कध और प्रारंभ.(1) इस आदेि को सभी रबड़ और सभी पॉलीमर सामग्री स े बने फुटजवयर और इसके घटक
(गणु वत् ता जनयंत्रण) आदेि, 2024 कहा िाए।
(2) यह आदेि ददनांक 01 अगस्ट्त, 2024 से प्रभावी होगा।
2. मानक जर्ह्न का अजनवाय धप्रयोग. ताजलका के कॉलम (2) में जवजनर्दष्ध ट वस्ट् तुएं या सामान उत ताजलका के कॉलम (3) म ें
उजल्लजखत तद्नरूु पी भारतीय मानक के अनुरूप होंग े तथा उनमें भारतीय मानक ब् यूरो (अनुपालन मूल् यांकन) जवजनयम,
2031 GI/2024 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
2018 की अनुसूर्ी-II की स्ट् कीम-I के अनुसार ब् यरू ो के लाइससें के तहत मानक जर्ह्न लगा होगा।
बिते दक जनयाधत की िाने वाली वस्ट् तओंु या सामान पर इस आदेि में स ेकुछ भी लाग ू नहीं होगा।
बिते यह भी दक समय-समय पर यथा संिोजधत सूक्ष्म , लघ ु और मध् यम उद्यम जवकास अजधजनयम, 2006 (2006 का 27) के
अनुच्छेद के तहत यथा पररभाज्त सूक्ष्म और लघ ुजवजनमाधण इकाइयों पर इस आदिे म ेंसे कुछ भी लागू नहीं होगा।
बिते यह भी दक केवल जनयाधत के जलए भारत में फुटजवयर के जवजनमाधण में प्रयु त की िाने वाली जनम्न जलजखत ताजलका म ें
जवजनर्दष्ध ट वस्ट् तुओं अथवा सामान के आयात पर इस आदेि में से कुछ भी लाग ूनहीं होगा:
क्र.स.ं वस्ट्त एु ं अथवा सामान भारतीय मानक भारतीय मानक का िी्कध
(घटक)
(i) (ii) (iii) (iv)
1. मोजल्डड रबड़ आउटसोल आईएस 5676:1995 मोजल्डड रबड़ यूजनट आउटसोल –
जविे्ताएं
2. आउटसोल के जलए माइक्रोसेल् यलु र आईएस 6664:1992 आउटसोल के जलए माइक्रोसेल् यलु र
रबड़ िीट रबड़ िीट – जविे्ताए ं
3. मोल् डेड पीवीसी आउटसोल आईएस 6719:1972 मोल्ड ेड पीवीसी यूजनट आउटसोल —
जविे्ताएं
4. पीयू आउटसोल आईएस 13893:1994 पॉलीयूरेथने यूजनट आउटसोल -
जविे्ताएं
बिते यह भी दक आयातक को, ऐसे फुटजवयर सोल के आयात की अनुमजत सीमा िल्ु क द्वारा जनम्नजलजखत तरीके से प्राप्त
करने से पूवध, र्मड़ा जनयाधत परर्द ्द्वारा सत्याजपत स्ट्व-घो्णा प्रस्ट्तुत करनी होगी:
(i). आयातक की यह स्ट् व-घो्णा दक आयाजतत फुटजवयर सोल का इस्ट् तेमाल केवल जनयाधत के जलए फुटजवयर के उत् पादन
अथवा असेम् बल करन े में दकया िाएगा तथा भारत के घरेल ू बािार में बेर्न े के जलए नहीं दकया िाएगा।
(ii). स्ट् व-घो्णा, आयातक के पत्रिी्ध (लेटर हडे ) पर दी िाएगी जिसमें इनवॉइस नंबर और आयात खेप के अन् य संगत
ब् यौरे जवजधवत रूप से उजल्लजखत होंगे तथा यह उल्ल ेख होगा दक आयाजतत मद जनयाधत के प्रयोिन के जलए फुटजवयर
के जवजनमाधण के अलावा घरेल ू बािार में दकसी अन् य कायध के जलए अथवा बेर्ने के जलए इस्ट्त ेमाल नहीं की िाएगी
तथा कंपनी संबंजधत प्राजधकरणों द्वारा प्रमाणन अथवा भजवष्य में लेखा परीिा के जलए अपने आंतररक ररकॉड ध का
रखरखाव करेगी।
(iii). र्मड़ा जनयाधत परर्द ्का सत् यापन दक आयातक परर्द ्में पंिीक त एक जवजनमाधता जनयाधतक ह जिसम:ें
(क) वतधमान में व ध पंिीकरण-सह-सदस्ट् यता प्रमाणपत्र सं् या और िारी करने की तारीख; (ख) उद्यम पंिीकरण
प्रमाण पत्र स्ं या और तारीख अथवा औद्योजगक उद्यजमता ञापापन सं् या और तारीख;
(ग) होम कंज़म् पिन नंबर के जलए प्रवेि का जबल और तारीख जिसे आयात मंिूरी हते ु भारतीय सीमा िल्ु क
इलेर ॉजनक डाटा इंटरर्ेंि में दायर दकया गया ह, का उल्ल ेख हो; और
(iv). फुटजवयर सोल की सुगम सीमा िुल् क मंिरू ी के जलए, आयातक को भारतीय सीमा िुल् क इलेर ॉजनक डाटा इंटरर्ेंि
पोटधल पर उपयुध त दस्ट् तावेि और अन् य सगं त दस्ट् तावेि अपलोड करन े होंगे।[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 3
बिते इस बात के भी दक यदद ब् यूरो द्वारा प्रमाजणत कोई जवजनमाधता अथवा ऐसा जवजनमाधता जिसने ब् यूरो म ें प्रमाणन के
जलए आवेदन दकया ह, भारतीय मानक ब् यूरो अजधजनयम 201( (201( का 11) की धारा 1क की उप-धारा (4) के तहत
यह आदेि लागू होने से पहल,े भारतीय मानक ब् यूरो के जर्ह्न के जबना जवजनमिमधत अथवा आयाजतत फुटजवयर उत् पादों के
अपने पुराने स्ट् टॉक की घो्णा करता ह, तो ऐसे जवजनमाधता को ऐसे घोज्त स्ट् टॉक को 0 िून, 2025 तक बेर्ने अथवा
प्रदमििधत करने अथवा बेर्न े का प्रस्ट् ताव करने की अनुमजत दी िाएगी।
3. प्रमाणन और प्रवतनध प्राजधकरण.- भारतीय मानक ब् यूरो ताजलका के कॉलम (2) में जवजनर्दष्ध ट वस्ट् तओंु या सामान के जलए
प्रमाणन और प्रवतधन प्राजधकरण होगा।
वस्ट्त एु ं अथवा सामान भारतीय मानक भारतीय मानक का िी्कध
(1) (2) (3) (4)
इंडजस्ट्रयल और प्रोटेजटव रबड़ नी और एंकल
इंडजस्ट्रयल और प्रोटेजटव रबड़ नी और एंकल
1 आईएस 5557: 2004
बूट्स बूट्स – जविे्ताए ं
आईएस 5557 (भाग
ऑल रबड़ गम बूट्स और एंकल बूट्स: भाग 2
2 ऑल रबड़ गम बूट्स और एंकल बूट्स
2): 2018 व् यावसाजयक प्रयोिन
3 मोल् डेड रबड़ आउटसोल आईएस 5676: 1995 मोल्ड ेड रबड़ यूजनट आउटसोल — जविे्ताएं
आउटसोल के जलए माइक्रोसेल् यलु र रबड़ िीट
4 आउटसोल के जलए माइक्रोसेल् यलु र रबड़ िीट आईएस 6664: 1992
— जविे्ताए ं
मोल् डेड पीवीसी यूजनट आउटसोल —
5 मोल् डेड पीवीसी आउटसोल आईएस 6719: 1972
जविे्ताए ं
6 सैंडल और जस्ट्लपस ध आईएस 6721: 2023 सैंडल और जस्ट्लपसध - जविे्ताए ं
आईएस 10702:
7 हवाई र्प् पल हवाई र्प् पल - जविे्ताए ं
2023
आईएस 12254: पॉलीजवलाइल ल ोराइड (पीवीसी) इंडजस्ट्रयल
पॉलीजवलाइल ल ोराइड (पीवीसी)
8
इंडजस्ट्रयल बूट्स 2021 बूट्स - जविे्ताए ं
आईएस 13893:
9 पॉलीयूरेथने आउटसोल पॉलीयूरेथने यूजनट आउटसोल — जविे्ताएं
1994
आईएस 13995:
10 अनलाइन् ड मोल्ड ेड रबड़ बूट्स अनलाइन् ड मोल्ड ेड रबड़ बूट्स – जविे्ताएं
1995
11 सामान् य औद्योजगक इस्ट्त ेमाल के जलए मोल् डेड आईएस 16645: सामान् य औद्योजगक इस्ट्त ेमाल के जलए मोल् डेड4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
प् लाजस्ट्टक फुटजवयर –लाइन् ड अथवा 2018 प् लाजस्ट्टक फुटजवयर –लाइन् ड अथवा अनलाइन्ड
अनलाइन् ड बूट्स बूट्स - जविे्ताए ं
आईएस 16994:
नगर जनगम के सफाई कायों के जलए परुु ्ों नगर जनगम के सफाई कायों के जलए परुु ्ों और
12
और मजहलाओं हते ु फुटजवयर 2018 मजहलाओं हते ु फुटजवयर
नोट : इस ताजलका के प्रयोिन के जलए, समय-समय पर यथा संिोजधत भारतीय मानकों के नवीनतम संस्ट् करण, िो
भारतीय मानक ब् यरू ो द्वारा अजधसूजर्त दकए गए ह,ैं लाग ूहोंग।े
[फा. स.ं पी-27025/80/2023-र्मड़ा]
रािीव ससंह िाकुर, अपर सजर्व
MINISTRY OF COMMERCE AND INDUSTRY
(Department for Promotion of Industry and Internal Trade)
ORDER
New Delhi, the 15th March, 2024
S.O. 1422(E).—In exercise of the powers conferred by sub-section (1) and (2) of section 16 read with sub-
section (3) of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), and in supersession of Footwear
made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2022, except as
respects things done or omitted to be done before such supersession, the Central Government, after consulting the
Bureau of Indian standards, is of the opinion that it is necessary or expedient so to do in the public interest, hereby
makes the following Order, namely:-
1. Short title and commencement.(1) This Order may be called the Footwear made from All Rubber and all
Polymeric Material and its Components (Quality Control) Order, 2024.
(2) It shall come into force with effect from the 1st day of August, 2024.
2. Compulsory use of Standard Mark. Goods or articles specified in the column (2) of the Table shall conform to
the corresponding Indian Standard specified in the column (3) of the said Table and shall bear the Standard Mark
under a license from the Bureau as per Scheme-I of Schedule-II of Bureau of Indian Standards (Conformity
Assessment) Regulations, 2018:
Provided that nothing in this Order shall apply to goods or articles meant for export:
Provided further that nothing in this Order shall apply to micro and small manufacturing units as defined in section 7
of the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006) as amended from time to time:
Provided also that nothing in this Order shall apply to import of goods or articles specified in the Table below used in
manufacturing of footwear in India for export only, namely:
Sl. No. Goods or Articles Indian Standard Title of Indian Standards
(Components)
(i) (ii) (iii) (iv)
1. Moulded Rubber Outsoles IS 5676:1995 Moulded Rubber Unit Outsoles —
Specification
2. Microcellular Rubber Sheets for IS 6664:1992 Microcellular Rubber Sheets for
Outsoles Outsoles — Specification
3. Moulded PVC Outsoles IS 6719:1972 Moulded PVC Unit Outsoles —
Specification
4. PU Outsoles IS 13893:1994 Polyurethane Unit Outsoles —
Specification[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 5
Provided also that the importer shall furnish a self-declaration certified by the Council for Leather Exports before the
import of such footwear soles are allowed by the customs in the following manner, namely:-
(i) self-declaration by the importer that the footwear soles imported are meant for production or assembly of footwear
for exports and not for sale in the domestic market of India;
(ii) the self-declaration shall be in the Letter Head of the importer duly mentioning the Invoice Number and other
relevant details of the import consignment and mentioning that the imported items shall not be put to any other use or
sold in the domestic market except in the manufacture of footwear for the purpose of exports and the company will
maintain its internal records for any future verification or audit by concerned authorities;
(iii) certification by the Council for Leather Exports that the importer is a manufacturer exporter registered with the
Council by quoting
(a) Currently valid Registration-cum-Membership Certificate number and date of issue;
(b) Udyam Registration Certificate Number and date;
(c) Bill of Entry for home consumption number and date which is filed in the Indian Customs Electronic Data
Interchange system for import clearance; and
(iv) the importers must upload the above documents along with other relevant documents in the Indian Customs
Electronic Data Interchange portal, for smooth customs clearance of the footwear soles:
Provided also that if any manufacturer certified by the Bureau or any manufacturer who has applied for certification to
the Bureau, declares prior to the Commencement of this Order, under sub-section (4) of section 18 of the Bureau of
Indian Standards, Act 2016 (11 of 2016) its old stock of footwear products without Bureau of Indian Standards Mark
manufactured or imported prior to such commencement, such manufacturer shall be permitted to sell or display or
offer to sell such declared stock upto the 30th June, 2025.
3. Certification and enforcement authority. The Bureau of Indian Standards shall be the certifying and enforcing
authority for the goods or articles specified in the column (2) of the Table.
Goods or articles Indian Standard Title of Indian Standard
(1) (2) (3) (4)
Industrial and protective rubber knee and Industrial and protective rubber knee and
1 IS 5557: 2004
ankle boots ankle boots - Specification
IS 5557 (Part 2): All rubber gum boots and ankle boots: Part 2
2 All rubber gum boots and ankle boots
2018 occupational purposes
Moulded Rubber Unit Outsoles —
3 Moulded Rubber Outsoles IS 5676: 1995
Specification
Microcellular Rubber Sheets for Outsoles —
4 Microcellular Rubber Sheets for Outsoles IS 6664: 1992
Specification
5 Moulded PVC Outsoles IS 6719: 1972 Moulded PVC Unit Outsoles — Specification
6 Sandal and Slippers IS 6721: 2023 Sandal and Slippers- Specification
7 Hawai Chappal IS 10702: 2023 Hawai Chappal- Specification
Polyvinyl chloride (PVC) industrial boots -
8 Polyvinyl chloride (PVC) industrial boots IS 12254: 2021
Specification
9 Polyurethane Outsoles IS 13893: 1994 Polyurethane Unit Outsoles — Specification
Unlined moulded rubber boots –
10 Unlined moulded rubber boots IS 13995: 1995
Specification
Moulded plastics footwear- Lined or Moulded plastics footwear- Lined or Unlined
11 Unlined polyurethane boots for general IS 16645: 2018 polyurethane boots for general industrial use-
industrial use Specification
Footwear for men and women for Footwear for men and women for municipal
12 IS 16994: 2018
municipal scavenging work scavenging work
Note : For the purposes of this Table, the latest version of Indian Standards, as amended from time to time, as
notified by the Bureau of Indian Standards, shall apply.
[F. No. P-27025/80/2023-LEATHER]
RAJEEV SINGH THAKUR, Addl. Secy.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.