See Full Document Text
रजजस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एxलx.x-GअID.-H2x7x0x 12026-269596
CG-DLxx-xEG-I2D7E0x1x2x0 26-269596
असाधारण
EXTRAORDINARY
भाग II—खण् ड 3—उप-खण्ड (i)
PART II—Section 3—Sub-section (i)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 31] नई ददल्ली, रुधवार, जनवरी 14, 2026/पौष 24, 1947 26/पौष 17, 1947
No. 31] NEW DELHI, WEDNESDAY, JANUARY 14, 2026/PAUSHA 24, 1947 /PAUSHA 17, 1947
वाजणज्य और उद्योग मत्रं ालय
(उद्योग सवं धनध और आतं ररक व्यापार जवभाग)
(केोबीय रॉयलर रोड)ध
अजधसचू ना
नई ददल्ली, 14 जनवरी, 2026
सा.का.जन. 31(अ).— रॉयलर अजधजनयम, 2025 (2025 का 12) की धारा 40, द्वारा प्रदत्त िजियों का प्रयोग
करते हुए तथा भारतीय रॉयलर जवजनयम, 1950 के अजधक्रमण म,ें ऐस े अजधक्रमण स े पहले दकए गए अथवा लोप की गई
रातों को छोड़कर, केोबीय रॉयलर रोड ध जनम्नजलजखत मसौदा जवजनयमों को रनान े का प्रस्ट्ताव करती ह,ै को उि अजधजनयम
की धारा 40 की उप-धारा (1) के अनुसार इनस े प्रभाजवत होने की संभावना वाले सभी व्यजियों की जानकारी के जलए
एतदद्वारा प्रकाजित दकया जाता ह ै और यह नोरिस ददया जाता ह ै दक उि मसौदा जवजनयमों पर, इस अजधसूचना को
प्रकाजित करन े वाले भारत के राजपत्र की प्रजतयां जनसामाोय को उपलब्ध कराए जाने की तारीख स े तीस ददनों की अवजध
के समाप्त होने के राद जवचार दकया जाएगा;
उि मसौदा जवजनयमों स े संरंध म ें जनधाधररत अवजध के भीतर दकसी व्यजि स े प्राप्त आपजत्तयों या सुझावों पर
केोबीय रॉयलर रोडध द्वारा जवचार दकया जाएगा;
0आपजत्तयां और सुझाव, यदद कोई हों, ऊपर जनधाधररत अवजध के भीतर सजचव, केोबीय रॉयलर रोड,ध वाजणज्य
और उद्योग मंत्रालय (उद्योग सवं धधन और आंतररक व्यापार जवभाग), कमरा न.ं 126ए, उद्योग भवन, नई ददल्ली- 110011
अथवा ई-मेल (sandeep.kumbhar7@gov.in) पर भेज ेजा सकते ह।ैं
302 GI/2026 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
मसौदा विवनयम
प्रारंवभक
1. संविप्त शीर्षक, अनुप्रयोग और आरंभ -- (1) इन विवनयमो ों को भारतीय बॉयलर विवनयम, 2026
कहा जाएगा।
(2) ये विवनयम सभी बॉयलरो ों पर लागू होगों े वजनमें प्राकृ वतक पररचलन कृ विम पररचलन और
कृ विम प्रिाह के वसद्ाोंत पर कायय करने िाले िे बॉयलर भी शावमल हैं वजनकी भाप और पानी की कोई
वनधायररत लाइन नही ोंहै।
(3) ये विवनमय आवधकाररक राजपि में इनके प्रकाशन की तारीख से लागू होगों े।
2. पररभार्ाएं- इन विवनयमो ोंमें, जब तक वक सोंदभय में अन्यथा अपेवित न हो: -
(क) अवधवनयम का तात्पयय बॉयलर अवधवनयम, 2025 (2025 का 12) से है;
(ख) "अप्रेजल कमेटी" का अथय वनरीिण प्रावधकरण के रूप में मान्यता के वलए आिेदन करने
िाली फमय के प्रदशयन का मूल्ाोंकन करने के वलए कें द्रीय बॉयलर बोडय द्वारा गवठत एक सवमवत
से है;
(ग) "कें द्रीय बॉयलसय बोडय परीिा स्थायी सवमवत" का अथय सिम व्यक्तियो ों की मान्यता के वलए
परीिा आयोवजत करने के वलए कें द्रीय बॉयलसय बोडय द्वारा गवठत सवमवत से है;
(घ) "बॉयलर का वडजाइन प्रेशर", -
(i) एक प्राकृ वतक या सहायता प्राप्त पररचलन बॉयलर के सोंबोंध में, अथय बॉयलर
के स्टीम डरम में अवधकतम अनुमन्य काययशील प्रेशर से है;
(ii) एक बार वकए जाने िाले कृ विम पररचलन बॉयलर के सोंबोंध में अथय अोंवतम
सुपरहीटर स्टीम आउटलेट अवधकतम अनुमन्य काययशील प्रेशर से है;
(ङ) "वडजाइन तापमान", -
(i) वबना तपे हुए घटक के वलए उि का तात्पयय, प्रचालन के तहत वकसी घटक
के भीतर द्रव्य तापमान से होगा।
(ii) तप्त घटक के वलए उि का तात्पयय, वनरोंतर पररक्तस्थवतयो ों में घटक के अोंदर
द्रि का तापमान वनवदयष्ट स वीकीकायय कोड द्वारा बााया गया से होगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 3
(च) "इिैल्ूएशन कमेटी" का अथय कें द्र सरकार द्वारा सिम प्रावधकारी, प्रवसद् सामग्री परीिण
प्रयोगशाला, प्रवसद् स्टील वनमायता, प्रवसद् फाउोंडरी या फोजय, प्रवसद्-ज्ञात ट्यूब या पाइप
वनमायता और प्रवसद् अिशे जीिन आकलन सोंगठन से है;
(छ) "फमय" का अथय है एक फमय और इसमें एक कों पनी शावमल है;
(ज) "फॉमय" का अथय है इन विवनयमो ोंके पररवशष्ट स में वदया गया प्रपि;
(झ) "अवधकतम अनुमन्य वीकीकायय काययशील प्रेशर" का अथय प्रेशर डरॉप और हाइडरॉवलक हेड
को ध्यान में रखते हुए समायोवजत वकसी भी वहस्से के वडजाइन प्रेशर से है;
(ञ) ‚पाइप‛ का अथय सामान्य प्रचालन के दौरान भाप अथिा पानी अथिा पानी-भाप के वमश्रण
के प्रिाह को चलाने के वलए आशवयत वडजाइन के साथ ट्यूब, डरम अथिा हेडर को छोड़कर
वसलेंवडरकल हॉलो पाटटयस के साथ ही िे जो सविराम प्रिाह करते हैं जैसे वनकासी पाइप, से है।
‘पाइप’ शब्द का अथय है वक प्रेशर पाटय के बाहरी वहस्से के जररए ताप के अोंतरण को प्रभावित
करने के वलए कोई वडजाइन।
(ट) "ट्यूब" ट्यूबुलर प्रेशर पाटय, जो या तो ताप के अोंतरण के प्रयोजन के वलए अपनी अवधकाोंश
लोंबाई में गमय गैसो ों के सोंपकय में आया है या वफर ऐसे वकसी ट्यूबलर प्रेशर पाटय के साथ प्रत्यि
रूप से बट्ट िेल्डेड है।
(2) इसमें प्रयुि वजन शब्दो ों और अवभव्यक्तियो ों को पररभाव त नही ों वकया गया है, लेवकन
अवधवनयम या इसके तहत बनाए गए वनयमो ों को पररभाव त वकया गया है, उनका आशय
हृमशः इन अवधवनयम या वनयमो ोंमें वदया गया अथय होगा।
अध्याय-1
3. सामान्य आिश्यकताएं, मानक शतों का अनुप्रयोग तथा इस संबंध में अपिाद
(1) कोई बॉयलर, अवधवनयम की धारा 12 की उप-धारा (5) के तहत पोंजीकृ त नही ोंहोगा तथा बॉयलर
के सोंदभय में उस धारा की उप-धारा (6) के तहत प्रमाण-पि जारी नही ोंवकया जाएगा, जब तक वक इन
विवनयमो ों के अनुिती अध्यायो ों में विवनवदयष्ट स सामग्री, वडजाइन और वनमायण सोंबोंधी मानक शतें ऐसे
बॉयलर के सोंबोंध में पूरी नही ोंकी जाती हैं।
(2) उप-विवनयम (1) में वलखी वकसी भी बात के बािजूद, विवनयम 29 के प्रािधानो ों के अध्यधीन मुख्य
वनरीिक वनम्नवलक्तखत में से वकसी भी पररक्तस्थवत के तहत बॉयलर को पोंजीकृ त कर सकता है, तथा
इसके इस्तेमाल को प्रावधकृ त करने के वलए आदेश जारी कर सकता है, अथायतट:-
(क) जब बॉयलर, स्टीम पाइप, इकोनमाइजर अथिा सुपरहीटर के वनमायण में इस्तेमाल
सामग्री भारतीय बॉयलर विवनयाम के अनुरूप नही ों है, लेवकन बॉयलर और स्टीम4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पाइप के वनमायण में इस्तेमाल वकए जाने के वलए उपयुि होने के कारण अन्य देशो ों
में सामान्य रूप से इस्तेमाल के वलए जानी जाती है, बशते वक ऐसी सामग्री इन
विवनयमो ों द्वारा विवशष्ट स रूप से प्रवतबोंवधत न हो तथा विवनमायण, वनमायण तापशोधन
सोंवहताओ ोंया मानको ोंके अनुरूप हो;
(ख) जब बॉयलर, स्टीम पाइप, इकोनमाइजर अथिा सुपरहीटर की सरोंचनागत विशे ताएों
इन विवनयमो ोंके अनुरूप तो नही ोंहै, लेवकन बोडय ने इन विवनयमो ोंमें वनधायररत िमता से
कमतर नही ोंमाना है तथा ये अन्य देशो ों में बॉयलर और स्टीम पाइप्स के विवनमायण की
सामान्य प्रवहृया का वहस्सा हैं;
(ग) जब बॉयलर, स्टीम पाइप, इकोनॉमाइजर अथिा सुपरहीटर का वनमायण इन विवनयमो ों
के अनुरूप वकया गया है, लेवकन विवनयमो ों के तहत यथा अपेवित कोई प्रमाण-पि
उपलब्ध नही ोंहै।
(3) बॉयलर का कोई भी सोंरचनागत पुजाय, जो प्रेशर के अध्यधीन है, बेसेमर प्रवहृया इस्पात अथिा
कास्ट अथिा मेवलएबल कास्ट ऑयरन से नही ोंबना होगा।
(4) जहाों इन विवनयमो ों में वकसी प्रेशर िाले पुजे के वडजाइन या वनमायण के वलए कोई विवशष्ट स प्रािधान
नही ों वकया गया है, िहाों वनरीिण प्रावधकारी िाल्व सवहत ऐसे प्रेशर िाले पुजों के वडजाइन, विवनमायण,
चरण वनरीिण और प्रमाणन की अनुमवत दे सकता है; विवटश मानक (बीएस), यूरोपीय मानक (ईएन),
अमेररकन सोसाइटी ऑफ मैके वनकल इोंजीवनयसय (एएसएमई) बॉयलर और प्रेशर िेसल कोड, ट्यूबलर
एक्सचेंजर मैन्यूफै क्चरसय एसोवसएशन (टीईएमए), तकनीकी आिश्यकताएों दस्तािेज (टीआरडी) जैसे
कोड या मानको ों के अनुरूप माउोंवटोंग और वफवटोंग, जीओएसटी और जापानी औद्योवगक मानक
(जेआईएस), जो आमतौर पर औद्योवगक रूप से उन्नत देशो ोंमें उपयोग वकए जाने के वलए जाने जाते हैं
और वनरीिण अवधकाररयो ोंका वनणयय सभी पोंजीकरण प्रावधकाररयो ोंके वलए बाध्यकारी होगा।
(5) टाइटेवनयम और अन्य विदेशी धातुओ ों से बने बॉयलरो ों और हीट एक्सचेंजसय की ट्यूबो ों को
अमेररकन सोसाइटी ऑफ मैके वनकल इोंजीवनयसय (एएसएमई), विवटश स्टैंडडटयस (बीएस), यूरोवपयन
स्टैंडडटयस (ईएन), डीआईएन, ट्यूबलर सवहत अोंतरायष्ट सरीय कोड के अनुसार अनुमोवदत वकया जा सकता
है, एक्सचेंजर मैन्युफै क्चरसय एसोवसएशन (टीईएमए) वनमायण के उन कोडो ों में वनवदयष्ट स न्यूनतम मोटाई के
साथ।
4. वकसी विदेशी कोड के अनुपालन के वलए बॉयलर का वनरीिण - इन विवनयमो ों में वनवहत बातो ों
के बािजूद वनरीिण प्रावधकारी वनयायत के वलए बनाए गए वकसी बॉयलर का उसके वनमायण के विवभन्न
चरणो ों के दौरान वनरीिण कर सकता है, तावक वकसी विदेशी कोड की आिश्यकताओ ों का अनुपालन
हो सके और प्रपि I के भाग क में प्रमाण-पि प्रदान कर सकता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 5
5. बॉयलर अथिा बॉयलर घटको ं को छू ट - अवधवनयम की धारा 38 की उप-धारा (4) के अनुसार
वकसी बॉयलर अथिा बॉयलर घटक को वनम्नवलक्तखत शतों के अध्यधीन अवधवनयम के सभी अथिा
वकसी प्रािधान के सोंचालन से पूरी तरह अथिा राज्य के वकसी भाग में वनम्नवलक्तखत शतों के अधीन छू ट
दी जा सकती है, अथायतट:-
(1) विवटश मानक (बीएस), यूरोपीय मानक (ईएन), अमेररकन सोसाइटी ऑफ मैके वनकल
इोंजीवनयसय (एएसएमई) बॉयलर और प्रेशर िेसल कोड, ट्यूबलर एक्सचेंजर
मैन्युफै क्चरसय एसोवसएशन (टीईएमए), तकनीकी आिश्यकता दस्तािेज (टीआरडी),
जीओएसटी और जापानी औद्योवगक मानक (जेआईएस) सवहत अोंतरायष्ट सरीय कोड अथिा
मानक के अनुसार बॉयलर अथिा बॉयलर घटक का वडजाइन और वनमायण;
(2) वनमायण में इस्तेमाल सामग्री उि विवनयमो ोंद्वारा विशे रूप से प्रवतबोंवधत न हो;
(3) राज्य सरकारो ोंद्वारा, बॉयलर अथिा बॉयलर घटको ों का, वडजाइन, वनमायण और सामग्री
की रेमनेंट लाइफ असेसमेंट जैसे आिश्यक परीिणो ों और जाोंच जो वक मावलक
कराएगा, के जररए सोंतुवष्ट स की गई है,
6. विवनयमो ं में फीस वनधाषररत नही ं की गई - ऐसी वकसी भी गवतविवध, वजसके सोंबोंध में राज्य
सरकार का मत है वक इसमें समय और श्रम लगेगा और वजसके वलए इन विवनयमो ों में कोई फीस
वनधायररत नही ोंकी गई है, ऐसी फीस राज्य सरकार द्वारा वनधायररत की जाएगी।
7. मानक अपेिाएं
(1) बॉयलर के वनमायण में वनम्नवलक्तखत अपेिाओ ोंका पालन वकया जाएगा, नामत: --
(क) सामग्री – बॉयलर के वनमायण में इस्तेमाल सभी प्लेटटस और बासय की जाोंच की
जाएगी, और यह आिश्यक होगा वक िे यहाों इसके बाद वनवहत विवनयमो ों के अनुरूप
पाए जाएों।
(ख) विवनमाषण –
(i) वनमायण के दौरान सभी बॉयलर सिम व्यक्ति के पययिेिण के अधीन होगों े,
तथा पररवशष्ट स-क में वनधायररत वकए गए अनुसार वनमायण के सभी चरणो ों में
उनका वनरीिण वकया जाएगा।
(ii) पररवशष्ट स क में िवणयत अनुसार विवभन्न चरणो ोंमें ट्यूब और स्टीम पाइप्स का
वनमायता के कारखाने में वनरीिण वकया जाएगा, तथा वनमायताओ ों द्वारा की गई
जाोंच भी सिम व्यक्ति की वनगरानी में होगी।6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iii) बॉयलर, बॉयलर घटको,ों इकोनमाइजर, फीड पाइप्स, स्टीम पाइप्स, और
सुपरहीटर की िैक्तल्डोंग करने िाले िैल्डर फामय II में वनधायररत प्रमाण-पि धारी
होगा।
(iv) बॉयलरो ों का विवनमायण उपयुि श्रेणी बॉयलर विवनमायता द्वारा वकया
जाएगा।
(v) मान्यता प्राप्त करने की इच्छुक फमय को उस राज्य में सोंचालनरत वनरीिण
प्रावधकरण के समि वनम्नवलक्तखत शुल्क के साथ प्रश्नािली ‘फामय III‘ में आिेदन करना
होगा जहाों िह मान्यता प्राप्त करने की इच्छुक है:
हृम सों. विवनमायता की श्रेणी मान्यता का शुल्क (रुपए) मान्यता के निीकरण के
वलए शुल्क
(i) विशे श्रेणी 20,000/- 10,000/-
(ii) श्रेणी I 15,000/- 7,500/-
(iii) श्रेणी II 10,000/- 5,000/-
(iv) श्रेणी III 7,500/- 3,750/-
(v) श्रेणी IV 5,000/- 2,500/-
(vi) बॉयलर घटक 5,000/- 2,500/-
(2) विवनमायता के रूप में मान्यता प्राप्त करने की इच्छुक फमय को, बॉयलर की श्रेणी के
आधार पर, वनम्नवलक्तखत अपेिाओ ोंको पूरा करना होगा, नामत: -
(क) विशेर् श्रेणी के बॉयलर विवनमाषता: वकसी भी प्रकार और िमता के बॉयलर
विवनमाषता के वलए- विशे श्रेणी के बॉयलर विवनमायता के पास विवनमायण सुविधाओ ों के वलए
7500 िगय मीटर का न्यूनतम किडय िेि होगा तथा वनम्नवलक्तखत वडजाइन, वनमायण और जाोंच
सुविधाएों होगों ी:-
(i) मशीनरी, औजार और उपकरण:
(अ) अवनिायष: सीम िैक्तल्डोंग के वलए सॉ िैक्तल्डोंग मशीन, टीआईजी िेक्तल्डोंग मशीन,
पैनल बैंवडोंग मशीन, िैक्तल्डोंग और ग्राइोंवडोंग उपकरण, रेवडयल वडरवलोंग मशीन,
चैम्फररोंग मशीन, ट्यूब बैंवडोंग मशीन, ट्यूब वीकेवगोंग मशीन, प्री- हीवटोंग और पोस्ट[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 7
हीवटोंग के वलए बनयर, तापशोधन सुविधाएों, हाइडरॉवलक टेस्ट पोंप (500 वक.ग्रा/ प्रवत िगय
सें.मी. तक या उससे अवधक), बैंड सॉ कवटोंग मशीन, एयर कम्प्रेसर, मापन औजार।
(ब) िैकल्पिक: उपयुि मोटाई की प्लेट बेंवडोंग अथिा रोवलोंग मशीन, ट्यूब
एक्सपेंडर, वडश्ड एण्ड मेवकों ग मशीन।
(ii) गुणित्ता आश्वासन और जांच सुविधाएं:
चुोंबकीय कण वनरीिण (एमपीआई), वलक्तिड पेनीटरेंट वनरीिण (एलपीआई), उवचत
साम्रगी की पहचान (पीएमआई) सोंबोंवधत सुविधाएों, यूवनिसयल टेक्तस्टोंग मशीन (यूटीएम),
रेवडयोग्रावफक टेक्तस्टोंग (आरटी), अल्ट्रासॉवनक टेक्तस्टोंग (यूटी)।
(iii) कायषबल:
(क) बॉयलर के िेि में न्यूनतम पाोंच ि य के अनुभि सवहत सोंगत वि य में स्नातक
इोंजीवनयर (इोंजीवनयसय), वनमायण, आरोंभ और पययिेिण के अनुभि िाले इोंजीवनयर
(इोंजीवनयसय), आई.एस.एन.टी. अथिा ए.एस.एन.टी. से िगय – III एनडीटी प्रमाणपि
धारक गैर विनाशकारी परीिण (एनडीटी) कावमयक, और उपयुि श्रेणी के आईबीआर
प्रमावणत िैल्डर।
(ख) विवनमायता, इोंजीवनयरो,ों तकनीवशयनो ों और िेल्डरो ों के प्रवशिण के वलए
आोंतररक सुविधाएों प्रदान करेगा और उसके पास आोंतररक अनुसोंधान और विकास
(आर एण्ड डी) सुविधाएों अथिा आर एण्ड डी के वलए टाई-अप होगा।
नोट: 1. विवनमायताओ ों के पास वडश्ड एण्ड, पोंप और वफवटोंग के विवनमायण की सुविधा होना
आिश्यक नही ोंहै, यवद िे इन्हें आउटसोसय कर देते हैं।
2. कायायत्मक आिश्यकता के आधार पर बॉयलर के वकसी भी पुजे/अथिा घटक को
अनुमोवदत विवनमायता से आउटसोसय वकया जा सकता है।
3. रोवलोंग और एज तैयार करने की प्रवहृया को आउटसोसय वकया जा सकता है तथा
विवनमायताओ ोंके पास इसके वलए विवनमायण सुविधाएों होना आिश्यक नही ोंहै।
4. वडजाइन कायायलय उनके वकसी भी विवनमायण के न्द्र के भीतर या विवनमायण के न्द्र के
बाहर क्तस्थत हो सकता है।
(ख) श्रेणी- I के बॉयलर विवनमाषता: 180 वक.ग्रा/ िगष सें.मी. तक के िवकिं ग प्रेशर के बॉयलर
के विवनमाषण के वलए श्रेणी I के बॉयलर विवनमायता के पास विवनमायण सुविधाओ ों के वलए8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
5000 िगय मी. का न्यूनतम किडय िेि तथा वनम्नवलक्तखत वडजाइन, वनमायण और जाोंच
सुविधाएों होगों ी:
(i) मशीनरी, औजार और उपकरण:
(क) अवनिायष: सीम िैक्तल्डोंग के वलए सॉ िैक्तल्डोंग मशीन, टीआईजी िैक्तल्डोंग मशीन,
पैनल बैंवडोंग मशीन, िैक्तल्डोंग और ग्राइोंवडोंग उपकरण, रेवडयल वडरवलोंग मशीन, चैम्फररोंग मशीन,
ट्यूब बैंवडोंग मशीन, ट्यूब वीकेवगोंग मशीन, प्री- हीवटोंग और पोस्ट हीवटोंग के वलए बनयर, तापशोधन
सुविधाएों, हाइडरॉवलक टेस्ट पोंप (300 वक.ग्रा/ प्रवत िगय सें.मी. तक या उससे अवधक), बैंड सॉ
कवटोंग मशीन, एयर कम्प्रेसर मापन औजार।
(ख) िैकल्पिक: उपयुि मोटाई की प्लेट बेंवडोंग अथिा रोवलोंग मशीन, ट्यूब
एक्सपेंडर, वडश्ड एण्ड मेवकों ग मशीन।
(ii) गुणित्ता आश्वासन और जांच सुविधाएं:
अवनिायष: चुोंबकीय कण वनरीिण (एमपीआई), वलक्तिड पैनेटरेंट वनरीिण (एलपीआई),
पॉवजवटि मैटेररयल आइडेंवटवफके शन (पीएमआई) सोंबोंवधत सुविधाएों, यूवनिसयल टैक्तस्टोंग मशीन
(यूटीएम), रेवडयोग्रावफक टैक्तस्टोंग (आरटी), अल्ट्रासॉवनक टैक्तस्टोंग (यूटी)।
(iii) कायषबल:
(क) बॉयलर के िेि में न्यूनतम चार ि य के अनुभि सवहत सोंगत वि य में स्नातक इोंजीवनयर
(इोंजीवनयसय), वनमायण, आरोंभ और पययिेिण अनुभि िाले इोंजीवनयर (इोंजीवनयसय),
आई.एस.एन.टी. अथिा ए.एस.एन.टी. से स्तर – II एनडीटी प्रमाणपि धारक एनडीटी कावमयक,
और उपयुि श्रेणी के आईबीआर प्रमावणत िैल्डर।
(ख) विवनमायता के पास इोंजीवनयरो,ों तकनीवशयनो ोंऔर िैल्डरो ोंके प्रवशिण के वलए आोंतररक
सुविधाएों होगों ी।
नोट: 1. विवनमायताओ ों के पास वडश्ड एण्ड, पोंप और वफवटोंग के विवनमायण की सुविधा होना
आिश्यक नही ोंहै, वजन्हें आउटसोसय वकया जा सकता है।
2. कायायत्मक आिश्यकता के आधार पर बॉयलर के वकसी भी पुजे/ अथिा घटक को
अनुमोवदत विवनमायता से आउटसोसय वकया जा सकता है।
3. रोवलोंग और एज तैयार करने की प्रवहृया को आउटसोसय वकया जा सकता है तथा
विवनमायताओ ोंके पास इसके वलए विवनमायण सुविधाएों होना आिश्यक नही ोंहै।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 9
4. वडजाइन कायायलय उनके वकसी भी विवनमायण के न्द्र के भीतर या विवनमायण के न्द्र के
बाहर क्तस्थत हो सकता है।
(ग) श्रेणी-II के बॉयलर विवनमायता: 120 वक.ग्रा/ िगय सें.मी. तक के िवकिं ग प्रेशर के बॉयलर के विवनमायण
के वलए - श्रेणी II के बॉयलर विवनमायता के पास विवनमायण सुविधाओ ों के वलए 3000 िगय मी. का
न्यूनतम किडय िेि तथा वनम्नवलक्तखत वडजाइन, वनमायण और जाोंच सुविधाएों होगों ी:
(i) मशीनरी, औजार और उपकरण:
(क) अवनिायष: सीम िैक्तल्डोंग के वलए सॉ िैक्तल्डोंग मशीन, टीआईजी िैक्तल्डोंग मशीन,
िेक्तल्डोंग और ग्राइोंवडोंग उपकरण, रेवडयल वडरवलोंग मशीन, चैमफररोंग मशीन, ट्यूब बैंवडोंग
मशीन, प्री- हीवटोंग और पोस्ट हीवटोंग के वलए बनयर, तापशोधन सुविधाएों, हाईडरोवलक टेस्ट पोंप
(200 वक.ग्रा/ प्रवत िगय सें.मी. तक या उससे अवधक), बैंड सॉ कवटोंग मशीन, एयर कम्प्रेसर
मापन औजार।
(ख) िैकल्पिक: उपयुि मोटाई की प्लेट बैंवडोंग अथिा रोवलोंग मशीन, पैनल बैंवडोंग
मशीन, ट्यूब एक्सपेंडर, वडश्ड एण्ड मेवकों ग मशीन, ट्यूब वीकेवगोंग मशीन।
(ii) गुणित्ता आश्वासन और जांच सुविधाएं:
(अ) अवनिायष: चुोंबकीय कण वनरीिण (एमपीआई), वलक्तिड पेनीटरेंट वनरीिण
(एलपीआई)।
(ब) िैकल्पिक: यूवनिसयल टैक्तस्टोंग मशीन (यूटीएम), रेवडयोग्रावफक टेक्तस्टोंग
(आरटी), अल्ट्रासॉवनक टेक्तस्टोंग (यूटी)।
(iii) कायषबल:
बॉयलर के िेि में स्नातक इोंजीवनयर (इोंजीवनयसय) के वलए न्यूनतम तीन ि य और वडप्लोमा
इोंजीवनयर (इोंजीवनयसय) के वलए पाोंच ि य के अनुभि सवहत सोंगत वि य में स्नातक अथिा
वडप्लोमा इोंजीवनयर एनडीटी कावमयक के वलए, आई.एस.एन.टी. अथिा ए.एस.एन.टी. से स्तर-
II का एनडीटी प्रमाण-पि धारक, और उपयुि श्रेणी के आईबीआर प्रमावणत िेल्डर।
नोट: 1. विवनमायताओ ों के पास वडश्ड एण्ड, पोंप और वफवटोंग के विवनमायण की सुविधा
होना आिश्यक नही ोंहै। वजन्हें आउटसोसय वकया जा सकता है।
2. कायायत्मक आिश्यकता के आधार पर बॉयलर के वकसी भी पुजे/ घटक को
अनुमोवदत विवनमायता से आउटसोसय वकया जा सकता है।10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
3. रोवलोंग और एज तैयार करने की प्रवहृया को आउटसोसय वकया जा सकता
है, तथा विवनमायताओ ों के पास इसके वलए विवनमायण सुविधाएों होना आिश्यक
नही ोंहै।
4. वडजाइन कायायलय उनके वकसी भी विवनमायण के न्द्र के भीतर या विवनमायण
के न्द्र के बाहर क्तस्थत हो सकता है।
(घ) श्रेणी-III के बॉयलर विवनमाषता: 50 वक.ग्रा./ िगष सें.मी. तक के िवकिं ग प्रेशर के बॉयलर के
विवनमाषण के वलए - श्रेणी III के बॉयलर विवनमायता के पास विवनमायण सुविधाओ ों के वलए 1500
िगय मी. का न्यूनतम किडय िेि तथा वनम्नवलक्तखत वडजाइन, वनमायण और जाोंच सुविधाएों होगों ी:
(i) मशीनरी, औजार और उपकरण:
(क) अवनिायष: उपयुि मोटाई की प्लेट बैंवडोंग अथिा रोवलोंग मशीन, टीआईजी
िैक्तल्डोंग मशीन, िैक्तल्डोंग और ग्राइोंवडोंग उपकरण, रेवडयल वडरवलोंग मशीन, चैमफररोंग
मशीन, ट्यूब बैंवडोंग मशीन, प्री- हीवटोंग और पोस्ट हीवटोंग के वलए बनयर, तापशोधन
सुविधाएों, हाईडरोवलक टेस्ट पोंप (100 वक.ग्रा./ प्रवत िगय सें.मी. तक या उससे अवधक),
बैंड सॉ कवटोंग मशीन, एयर कम्प्रेसर मापन औजार।
(ख) िैकल्पिक: सीम िैक्तल्डोंग के वलए सॉ िैक्तल्डोंग मशीन, पैनल बैंवडोंग मशीन, ट्यूब
एक्सपेंडर, वडश्ड एण्ड मेवकों ग मशीन, ट्यूब वीकेवगोंग मशीन।
(ii) गुणित्ता आश्वासन और जांच सुविधाएं:
(क) अवनिायष: चुोंबकीय कण वनरीिण (एमपीआई), वलक्तिड पेनीटरेंट वनरीिण
(एलपीआई)।
(ख) िैकल्पिक: ऑप्शनल यूवनिसयल टैक्तस्टोंग मशीन (यूटीएम), रेवडयोग्रावफक
टैक्तस्टोंग (आरटी), अल्ट्रासॉवनक टैक्तस्टोंग (यूटी)।
(iii) कायषबल:
बॉयलर के िेि में स्नातक इोंजीवनयर (इोंजीवनयसय) के वलए न्यूनतम दो ि य और वडप्लोमा
इोंजीवनयर (इोंजीवनयसय) के वलए चार ि य के अनुभि सवहत सोंगत वि य में स्नातक अथिा
वडप्लोमा इोंजीवनयर एनडीटी कावमयक के वलए, आई.एस.एन.टी. अथिा ए.एस.एन.टी. से वद्वतीय
स्तर का एनडीटी प्रमाण-पि धारक, और उपयुि श्रेणी के आईबीआर प्रमावणत िेल्डर।
नोट: 1. विवनमायताओ ों के पास वडश्ड एण्ड, पोंप और वफवटोंग के विवनमायण की सुविधा होना
आिश्यक नही ोंहै। वजन्हें आउटसोसय वकया जा सकता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 11
2. कायायत्मक आिश्यकता के आधार पर बॉयलर के वकसी भी पुजे/ अथिा घटक को
अनुमोवदत विवनमायता से आउटसोसय वकया जा सकता है।
3. रोवलोंग और एज तैयार करने की प्रवहृया को आउटसोसय वकया जा सकता है तथा
विवनमायताओ ोंके पास इसके वलए विवनमायण सुविधाएों होना आिश्यक नही ोंहै।
4. वडजाइन कायायलय उनके वकसी भी विवनमायण के न्द्र के भीतर या विवनमायण के न्द्र के
बाहर क्तस्थत हो सकता है।
(ङ) श्रेणी-IV के बॉयलर विवनमाषता: 17.5 वक.ग्रा./ िगष सें.मी. तक के िवकिं ग प्रेशर के बॉयलर के
विवनमाषण के वलए - श्रेणी IV के बॉयलर विवनमायता के पास विवनमायण सुविधाओ ों के वलए पयायप्त
किडय िेि तथा वनम्नवलक्तखत वडजाइन, वनमायण और जाोंच सुविधाएों होगों ी:
(i) मशीनरी, औजार और उपकरण:
अवनिायष: उपयुि मोटाई की प्लेट बैंवडोंग अथिा रोवलोंग मशीन, रेवडयल वडरवलोंग मशीन,
िैक्तल्डोंग और ग्राइोंवडोंग उपकरण, हाईडरोवलक टेस्ट पोंप (50 वक.ग्रा./ प्रवत िगय सें.मी. तक या
उससे अवधक), ट्यूब एक्सपेंडर, लेद मशीन, पािर हैकसॉ, वडरल मशीन, मापन औजार।
(ii) कायषबल:
बॉयलर के िेि में स्नातक इोंजीवनयर (इोंजीवनयसय) के वलए न्यूनतम एक ि य और वडप्लोमा
इोंजीवनयर (इोंजीवनयसय) के वलए तीन ि य के अनुभि सवहत सोंगत वि य में स्नातक अथिा
वडप्लोमा इोंजीवनयर (इोंजीवनयसय) तथा उपयुि श्रेणी के आईबीआर प्रमावणत िैल्डर।
नोट: 1. विवनमायताओ ों के पास वडश्ड एण्ड, पोंप और वफवटोंग के विवनमायण की सुविधा होना
आिश्यक नही ोंहै वजन्हें आउटसोसय वकया जा सकता है।
2. कायायत्मक आिश्यकता के आधार पर बॉयलर के वकसी भी पुजे/अथिा घटक को
अनुमोवदत विवनमायता से आउटसोसय वकया जा सकता है।
3. ताप शोधन, एनडीटी और मैके वनकल जाोंच आउटसोसय की जा सकती है।
4. वडजाइन कायायलय उनके वकसी भी विवनमायण के न्द्र के भीतर या विवनमायण के न्द्र के
बाहर क्तस्थत हो सकता है।
(च) बॉयलर घटक विवनमाषता: बॉयलर घटक विवनमायता के पास विवनमायण सुविधाओ ों के वलए पयायप्त
किडय एररया होगा तथा उन बॉयलर घटको ों के वलए पयायप्त वडजाइन और वनमायण सुविधाएों होगों ी12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वजनका िे विवनमायण करने का इच्छुक है। बॉयलर विवनमायता के वडजाइन के अनुसार बॉयलर
घटक का विवनमायण वकए जाने की क्तस्थवत में वडजाइन सुविधाओ ोंकी आिश्यकता नही ोंहोगी।
नोट: 1. उच्चतर श्रेणी का बॉयलर विवनमायता, वनम्नतर श्रेणी के बॉयलर का विवनमायण करने के
वलए पाि होगा।
2. बॉयलर विवनमायता, बॉयलर घटक विवनमायता के रूप में बॉयलर घटको ोंके विवनमायण
के वलए भी पाि होगा।
(3) वनरीिण प्रावधकारी प्रश्नािली के उत्तर सवहत आिेदन की जाोंच और मूल्ाोंकन करेगा तथा इस
बारे में सोंतुष्ट स होने के बाद वक उप-विवनयम (2) के तहत आिश्यकताओ ों को पूरा वकया गया है,
फमय को उस श्रेणी में विवनमायता के रूप में मान्यता प्रदान करेगा, वजस श्रेणी के वलए आिेदन
वकया गया है।
(4) विवनमायता के रूप में फमय की मान्यता तीन ि य की अिवध के वलए होगी। तत्पश्चातट फमय को
उि अिवध की समाक्तप्त से कम से कम तीन महीने पहले अपनी मान्यता के निीकरण के वलए
आिेदन करना होगा।
8. प्रमाण-पि, रेखावचि और विशे वििरण – (1) अवधवनयम की धारा 12 की उप-धारा (1) तथा
धारा 19 की उप-धारा (1) के खण्ड (ग) के तहत बॉयलर के पोंजीकरण के वलए आिेदन से
पहले अथिा उसके साथ, मुख्य वनरीिक को, वनम्नवलक्तखत प्रमाण-पि और रेखावचि अथिा
विशे वििरण (प्रमाण-पि और रेखावचि अथिा विशे वििरण वडवजटल हस्तािर सवहत,
सॉफ्ट कॉपी में भी प्रस्तुत वकया जाए) प्रस्तुत वकया जाएगा, नामत: --
(क) (I) वनरीिण प्रावधकारी से फामय I (खण्ड ख) अथिा फामय I (खण्ड ग), जैसा भी मामला हो, में
प्रमाण-पि, जो यह प्रमावणत करता हो वक वनमायण के दौरान बॉयलर के वनरीिण के सोंबोंध में
सामग्री की जाोंच की गई थी तथा बॉयलर का वनमायण उनके पययिेिण में हुआ था तथा पूरा होने
के बाद हाईडरॉवलक जाोंच की गई थी।
(II) उसी स्थल पर जोड़े जाने िाले बॉयलर के मामले में, पूरी तरह से जोड़े गए बॉयलर पर
वनरीिण प्रावधकारी द्वारा हाईडरॉवलक जाोंच की आिश्यकता लागू नही ों होगी बशते वक ऐसे
बॉयलर के प्रत्येक पुजे की हाईडरॉवलक रूप से जाोंच की गई हो तथा वनरीिण प्रावधकारी द्वारा
इसे प्रमावणत वकया गया हो, जैसा वक इन विवनयमो ोंके तहत अपेवित है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 13
(iii) िेस्ट हीट बॉयलरो ों के मामले में, वनमायण के बाद फॉमय- I (खण्ड-ख) या फॉमय- I (खण्ड-ग)
में एक प्रमाण पि राज्य के वनरीिण प्रावधकरण द्वारा जारी वकया जा सकता है, जहाों बॉयलर
स्थावपत वकया गया है। यह प्रमाण-पि, इस विवनयम के तहत बॉयलर के पोंजीकरण के वलए
प्रस्तुत वकए जाने िाले अलग-अलग घटको ोंके वलए वीकावमयो ोंद्वारा, साइट पर वनमायण पूरा करने
के वलए, वनधायररत प्रपिो ोंमें उन्हें वदए गए प्रमाणपिो ोंके बल पर प्रदान वकया जाएगा, वजन्हें राज्य
के वनरीिण प्रावधकरण को, जहाों बॉयलर स्थावपत है, साइट पर ऐसे बॉयलर का वनमायण शुरू
होने से पहले प्रस्तुत वकया जाएगा।
(iv) फामय I (खण्ड ख) अथिा फामय I (खण्ड ग), जैसा भी मामला हो, के बदले में वनरीिण
प्रावधकरण द्वारा बॉयलर के वलए फामय I (खण्ड घ) में प्रमाण-पि प्रदान वकया जा सकता है,
वजनके वलए सामग्री, वडजाइन और वनमायण के सोंबोंध में मानक शतों से अोंतर के वलए बोडय
अथिा वनरीिण प्रावधकरण द्वारा अनुमवत दी गई है।
(v) बॉयलर तैयार होने और बॉयलर को जोड़ने के स्थल पर हाइडरॉवलक जाोंच के सोंतो जनक
रहने के बाद वनरीिण प्रावधकरण द्वारा फामय I – (खण्ड ङ) जारी वकया जाएगा।
(ख) बॉयलर के वनमायता अथिा उसके प्रवतवनवध द्वारा हस्तािररत, विवनमायण और जाोंच के सोंबोंध में
फामय IV (खण्ड क) में एक प्रमाण-पि, वजसमें बॉयलर, इसके प्रमुख पररमाप का वििरण,
इसके वनमायण में इस्तेमाल सामग्री के प्रकार का वििरण, सभी प्लेटटस की मोटाई, शैल बनाने
की सामान्य पद्वत में वकसी अोंतर का ब्यौरा जैसे सॉवलड रोवलोंग अथिा िैक्तल्डोंग, हाइडरॉवलक
टेस्ट वजससे बॉयलर सोंबोंवधत था, अवभप्रेत िवकिं ग प्रेशर, तप्त सतह का िेिफल, अवधकतम
वनरोंतर िाष्पीकृ त िमता, विवनमायण का ि य और स्थान तथा प्रचालनरत बॉयलर की सोंख्या का
ब्यौरा हो।
नोट: हालाोंवक वनरीिण प्रावधकारी प्रमाण-पि के सोंशोवधत फामय को अनुमोवदत कर सकता है,
वजसमें उस वििरण का लोप वकया जा सकता है जो वकसी बॉयलर विशे से सोंबोंवधत न हो।
(ग) (i) शॉप में जोड़े गए बॉयलसय के मामले में, प्रमुख पररमाप के उवचत माप को दशायने िाले
रेखावचि, खण्ड, वनमायता का नम्बर वनरीिण प्रावधकारी की मोहर की क्तस्थवत, सामग्री का वबल,
िैक्तल्डोंग का ब्यौरा और वडजाइन मापदण्ड।
(ii) उस साइट पर जोड़े गए बॉयलसय के मामले में, सामान्य और प्रेशर पुजों की व्यिस्था को
दशायने िाले रेखावचि, कॉइल का रेखावचि, प्रमुख पररमाप के ब्यौरे सवहत हेडर और डरम,14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
सामग्री का वबल और वडजाइन मापदण्ड। विवनमायता, रेखावचिो ों के वलए उवचत माप का
इस्तेमाल कर सकते हैं और एक समान अथिा वमलती - जुलती एकावधक वहस्सो ों के मामले में
के िल एक वहस्से का रेखावचि प्रस्तुत वकया जाए।
(घ) (i) विवनयम 45 और 46 में सोंदवभयत प्रकार के अनुसार हृमश: इस्पात विवनमायता से फामय V
(खण्ड क) में प्रमाण-पि और प्लेटटस अथिा बासय के वनमायता से प्रमाण-पि तथा प्लेटटस अथिा
बासय के वनमायता से प्रमाण-पि में चाजय नोंबर, प्लेटटस अथिा बासय की सोंख्या एिों जाोंची गई
विवभन्न प्लेटटस की सोंख्या और पररमाप, उनका रसायवनक विश्ले ण एक खण्ड में वकलोग्राम
प्रवत िगय वकलोमीटर में उनकी अवधकतम िहन िमता, बाोतरी का प्रवतशत और मापी गई
लोंबाई, बेंड तथा की गई अन्य जाोंच के प्रकार और नतीजे तथा जाोंच की तारीख दशायई जाएगी।
(ii) यवद िवकिं ग प्रेशर के वलए वनरीिण प्रावधकारी द्वारा बॉयलर की योग्यता के सोंबोंध में वदए गए
अनुमोदन के बारे में उनके पोंजीकरण की तारीख से तीन ि य की अिवध के भीतर कोई प्रश्न
उठता है, तो मुख्य वनरीिक द्वारा अनुरोध वकए जाने पर वीकामी उि खण्डो ों में विवनवदयष्ट स मूल
दस्तािेज प्राप्त और प्रस्तुत करेगा।
बशते वक के न्द्रीय बॉयलर बोडय द्वारा मान्यताप्राप्त प्रख्यात इस्पात वनमायता द्वारा
विवनयम 17 से 23 में वनधायररत तरीके से तैयार और जाोंचे गए इस्पात के सोंबोंध में, वनरीिण
प्रावधकारी से प्रमाण-पि के बदले फामय V (खण्ड क) में, प्रख्यात इस्पात वनमायता के प्रमाण-पि
को वीकीकार वकया जाएगा।
(iii) अन्य प्रयोजनो ोंके वलए भी इस्तेमाल की गई प्लेटटस के ब्यौरे िाले ऐसे प्रमाण-पि के कारण
उन मामलो ों में, जहाों प्रख्यात इस्पात वनमायता से प्राप्त मूल प्रमाण-पि फामय V (खण्ड क) में
प्रस्तुत वकए जाने योग्य नही ोंहै, फामय V (खण्ड क) में प्रमाण-पि के एिज में बॉयलर के वनमायता
द्वारा विवधित रूप से हस्तािररत और वनरीिण प्रावधकारी द्वारा प्रवत हस्तािररत मूल प्रमाण-
पि का उद्रण वीकीकार वकया जाएगा, बशते वक फामय V (खण्ड क) में अपेवित सभी
जानकारी उद्रण में प्रस्तुत की गई हो।
(iv) बॉयलर और बॉयलर घटको ों में इस्तेमाल सामग्री के सभी जाोंच प्रमाण-पिो ों का उद्रण
फामय IV (खण्ड क) के साथ फामय V (खण्ड ख) में वदया जाएगा।
(v) फ्यूजन िेल्डेड डरम्स के मामले में, िैल्ड मरम्मत का आरेख और तापशोधन के तापमान
चाटय भी प्रस्तुत वकए जाएोंगे।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 15
(vi) फनेस अथिा सुपर हीटर जोन में हृीप रेंज में इस्तेमाल की गई वमवश्रत इस्पात सामग्री-
(क) फनेस अथिा सुपर हीटर जोन में इस्तेमाल वकए जाने पर वमवश्रत इस्पात अथिा
वनके ल अलॉय की प्रत्येक श्रेणी के वलए अवधकतम सवियस तापमान से 50० से॰ से
अवधक पर दो बार 1,000 घोंटे का स्टरेस रप्चर टेस्ट वकया जाएगा;
(ख) उपयुयि तापमान पर 1,000 घोंटो ोंमें रप्चर स्टरेस को -20 प्रवतशत रेखा के अनुरूप
सोंपूणय घुमाि (मास्टर किय) से वलया जाएगा। इस प्रेशर पर न्यूनतम 1,000 घोंटे के
विदीणय काल का अनुमान है तथा दोनो ों नमूनो ों उपयुयि प्रेशर और तापमान पर 1,000
घोंटे की जाोंच को पास करेंगे।
(ग) ऊपर वदए गए वििरण के अनुसार, 1000 घोंटो ों के वलए कम अिवध के स्टरेस रप्चर
टेस्ट राष्ट सरीय धातुकमीय प्रयोगशाला/प्रख्यात इस्पात वनमायता अथिा वीकदेशी रूप से
उत्पावदत वमवश्रत इस्पात के बाे हुए तापमान के आोंकड़े एकि करने हेतु हृीप टेक्तस्टोंग
के वलए बॉयलर बोडय द्वारा मान्यताप्राप्त वकसी अन्य सामग्री प्रयोगशाला अथिा भारत
के बाहर उत्पावदत वमवश्रत इस्पात के वलए विवनमायण िाले देश में हृीप टेक्तस्टोंग के वलए
राष्ट सरीय रूप से मान्यता प्राप्त अथिा प्रत्यावयत जाोंच प्रयोगशाला द्वारा वकया जाता है,
वजसका प्रयोजन यह पता लगाना है वक इस्पात विशे वििरण के अनुरूप है अथिा
नही ोंतथा यह भी सुवनवश्चत करना है वक इस्पात अमेररकन सोसाइटी ऑफ मेके वनकल
इोंजीवनयसय (एएसएमई) अथिा विवटश मानक (बीएस) अथिा यूरोपीय मानक (ईएन)
कोड, जैसा भी मामला हो, में वदए गए दीघयकालीन रप्चर स्टरेस िैल्ू/ अथिा अवधकतम
अनुमन्य प्रेशर मूल् को पूरा करने में सिम है, तथा इस सबोंधों में एक प्रमाण-पि वदया
जाता है; यवद वकसी मान्यताप्राप्त वनरीिण प्रावधकरण के साथ काययरत सिम व्यक्ति
की मौजूदगी में जाोंच कराई जाती है, तो वकसी अन्य प्रयोगशाला में िैकक्तिक जाोंच भी
की जा सकती है।
(घ) इन नमूनो ों को सिम व्यक्ति द्वारा हृमरवहत तरीके से चुना जा सकता है तथा यह
नमूने अधयवनवमयत उत्पाद के रूप में हो सकते हैं, जैसे लगभग 25 िगय वम.मी के फॉर्ज्य
बार, जो सोंगत विशे ताओ ों द्वारा यथावनधायररत ताप शोधन से गुजरेंगे।
(vii) 20 टन प्रवत घोंटे या उससे अवधक की िमता िाले ऐसे बॉयलरो ों के वलए, वजन्हें उसी
स्थल पर जोड़ा जाना अपेवित है, उनके ढाोंचो ों की अलग से आपूवतय की जा सकती है तथा 20
टन प्रवत घोंटे से कम की िमता िाले सभी बॉयलरो ों को बॉयलर के विवनमायण के समय जारी16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
फामय IV (खण्ड क) में उक्तिक्तखत ब्यौरे के साथ सोंबोंवधत फॉमय में सभी ााोंचो ों और पुजों का
प्रमाण-पि प्राप्त करना होगा।
9. वनमाषता की मोहर—बॉयलर में एक स्पष्ट स स्थान पर मोहर लगी होगी, जैसे-
वनमाषता का नाम ..........................................................
कारखाने की सोंख्या ......... वनमायण का ि य........... ....................... परीिण
वक.ग्रा./ िगय सें.मी. (ग्रा) पर ........ जाोंच की गई वडजाइन प्रेशर......... वक.ग्रा./ िगय सें.मी. (ग्रा)
सिम व्यक्ति अथिा
वनरीिण प्रावधकारी की आवधकाररक मोहर
10. पाइपो ं के वलए प्रमाण-पत्र – फामय IV (खण्ड ख) में वनमायता और वनरीिण प्रावधकारी द्वारा
हस्तािररत विवनमायण और जाोंच प्रमाण-पि प्रस्तुत करना होगा, तथा प्रख्यात पाइप वनमायताओ ों
को भी फामय IV (खण्ड ख) में विवनमायण और जाोंच के ऑनलाइन प्रमाण-पि पर वडवजटल रूप
से हस्तािर करने की अनुमवत होगी।
11. ट्यूब के वलए प्रमाण-पत्र – फामय IV (खण्ड ग) में वनमायता और वनरीिण प्रावधकारी द्वारा
हस्तािररत विवनमायण और जाोंच प्रमाण-पि प्रस्तुत करना होगा तथा प्रख्यात ट्यूब वनमायताओ ों
को भी फामय IV (खण्ड ग) में विवनमायण और जाोंच के ऑनलाइन प्रमाण-पि पर वडवजटल रूप
से हस्तािर करने की अनुमवत दी जाएगी।
नोट: प्रख्यात पाइप अथिा ट्यूब वनमायताओ ों (विवनयम 17 से 23 में यथा वनधायररत तरीके से
के न्द्रीय बोडय द्वारा मान्यता प्राप्त) द्वारा भारत अथिा अन्य देशो ों में तैयार ट्यूब्स के मामले में,
उनके द्वारा मेके वनकल जाोंच सवहत, सामग्री की जाोंच की जाए तथा उनके द्वारा यथाप्रमावणत
मेके वनकल जाोंच सवहत सामग्री की जाोंच से सोंबोंवधत वििरण तथा फामय IV (खण्ड ख) या फामय
IV (खण्ड ग) में प्रमाण-पि में वििरण के उपयुि कॉलम और पैराग्राफ तथा ऊपर बताए गए
अनुसार ‘प्रख्यात पाइप और ट्यूब वनमायता’ से प्रमाण-पि प्रस्तुत वकए जाने के मामले में, जहाों
तक फामय में विवनवदयष्ट स मेके वनकल जाोंच सवहत सामग्री की जाोंच का सोंबोंध है, ऐसे प्रमाण-पि
को वनरीिण प्रावधकारी से प्राप्त प्रमाण-पि के एिज में वीकीकार वकया जाए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 17
12. माउंवटंग और वफवटंग के वलए प्रमाण-पत्र – विवनमायण के दौरान बॉयलर के ढाोंचें और स्टीम
पाइप के सोंबोंध में वनमायता और वनरीिण प्रावधकारी द्वारा हस्तािररत फामय IV (खण्ड घ) में
विवनमायण और जाोंच प्रमाण-पि प्रस्तुत वकया जाएगा।
नोट: फामय IV (खण्ड घ) में प्रमाण-पि की प्रवतवलवप को वीकीकार वकया जाएगा बशते वक इसे मूल
प्रमाण-पि पर हस्तािर करने िाले विवनमायता और वनरीिण प्रावधकारी द्वारा पृष्ाोंवकत वकया
गया हो।
13. काल्पटंग के वलए प्रमाण-पत्र- फामय IV (खण्ड ङ) में वनमायता और वनरीिण प्रावधकारी द्वारा
हस्तािररत विवनमायण और जाोंच प्रमाण-पि प्रस्तुत वकया जाएगा। हालाोंवक के न्द्रीय बॉयलर बोडय
द्वारा मान्यताप्राप्त प्रख्यात फाउन्ड्री द्वारा विवनवमयत काक्तस्टोंग के मामले में वनरीिण प्रावधकारी के
हस्तािर अपेवित नही ोंहोगों े।
14. णोवजिंग के वलए प्रमाण-पत्र- फामय IV (खण्ड च) में वनमायता और वनरीिण प्रावधकारी द्वारा
हस्तािररत विवनमायण और जाोंच प्रमाण-पि प्रस्तुत वकया जाएगा। हालाोंवक के न्द्रीय बॉयलर बोडय
द्वारा मान्यताप्राप्त प्रख्यात फाउन्ड्री द्वारा विवनवमयत फ़ोवजिंग के मामले में वनरीिण प्रावधकारी के
हस्तािर अपेवित नही ोंहोगों े।
15. हेडसष, डीसुपरहीटसष अथिा अटैम्परेटर, ब्लोडाउन टैंक, फीडिॉटर टैंक, एक्यूमुयलेटर
और डीअरेटर के विवनमाषण के दौरान वनरीिण का प्रमाण-पत्र – फामय IV (खण्ड छ) में
वनमायता और वनरीिण प्रावधकारी द्वारा हस्तािररत विवनमायण और जाोंच प्रमाण-पि प्रस्तुत वकया
जाएगा।
16. वडश्ड एण्ड अथिा एण्ड किसष के विवनमाषण के दौरान वनरीिण का प्रमाण-पत्र- फामय IV
(खण्ड ज) में वनमायता और वनरीिण प्रावधकारी द्वारा हस्तािररत विवनमायण और जाोंच प्रमाण-पि
प्रस्तुत वकया जाएगा।
17. मान्यता के वलए आिेदन- (1) काययकलाप के वकसी एक िेि में सलोंग्न फमय, सिम
प्रावधकारी, वनरीिण प्रावधकरण, प्रख्यात सामग्री जाोंच प्रयोगशाला, प्रख्यात इस्पात वनमायता,
प्रख्यात फाउोंडरी/ अथिा फ़ोजय, प्रख्यात ट्यूब/ अथिा पाइप वनमायता और प्रख्यात शे
जीिनकाल मूल्ाोंकन सोंगठन के रूप में मान्यता के वलए सवचि, के न्द्रीय बॉयलर बोडय, उद्योग
सोंिधयन और आोंतररक व्यापार विभाग, िावणज्य और उद्योग मोंिालय को, वनधायररत शुल्क
सवहत, आिेदन प्रस्तुत करेगी।18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) उप-विवनयम (1) के तहत काययकलाप के िेि में लागू प्रश्नािली फामय VI (खण्ड
क) से फामय VI (खण्ड-छ) में विवधितट रूप से भरा हुआ आिेदन वकया जाएगा अथिा
इसे ऑनलाइन भी प्रस्तुत वकया जा सकता है।
(3) उप-विवनयम (1) के तहत सिम प्रावधकारी और वनरीिण प्रावधकारी के रूप
में मान्यता हेतु आिेदन करने िाली फमय के पास उस काययकलाप के िेि में न्यूनतम 2
ि य का अनुभि होना चावहए, वजसके वलए आिेदन वकया गया है। इन विवनयमो ों के
प्रािधानो ों के अनुसार, प्रख्यात सामग्री जाोंच प्रयोगशाला, अथिा प्रख्यात इस्पात
वनमायता/ प्रख्यात फाउोंडरी/ अथिा फ़ोजय, प्रख्यात ट्यूब/ अथिा पाइप वनमायता और
प्रख्यात शे जीिनकाल मूल्ाोंकन सोंगठन के रूप में मान्यता के वलए 2 ि य का
अनुभि अपेवित होगा।
(4) प्रख्यात इस्पात वनमायता, प्रख्यात पाइप/ ट्यूब वनमायता, प्रख्यात फाउोंडरी अथिा
फ़ोजय के रूप में मान्यता प्राप्त करने की इच्छुक विदेश में क्तस्थत फमय के मामले में पूणय
रूप से भरी हुई प्रश्नािली के साथ दस हजार अमेररकी डॉलर का शुल्क जमा कराना
होगा, तावक विवनयमन 23 के तहत इिैलुएशन कमेटी के दौरे के खचय को पूरा वकया
जा सके ।
बशते वक, जहाों फमय के पास उसी देश में एक से ज्यादा विवनमायण इकाइयाों हैं,
िहाों दो हजार अमेररकी डॉलर माि प्रवत अवतररि इकाई की दर से अवतररि शुल्क
जमा कराना होगा।
(5) सिम प्रावधकरण और वनरीिण प्रावधकरण के रूप में मान्यता प्राप्त करने की
इच्छुक विदेश में क्तस्थत फमों के मामले में पूणय रूप से भरी हुई प्रश्नािली के साथ एक
हजार अमेररकी डॉलर का शुल्क जमा कराना होगा।
(6) भारत में उप-विवनयम (1) के तहत मान्यता प्राप्त करने की इच्छुक फमय के
मामले में पूणय रूप से भरी हुई प्रश्नािली के साथ पोंद्रह हजार रुपए का शुल्क जमा
कराना होगा तथा मान्यता के निीकरण के वलए पूणय रूप से भरी हुई प्रश्नािली के साथ
दस हजार रुपए का शुल्क जमा कराना होगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 19
(7) विदेश में विवनमायण कायय के मामले में इिैलुएशन कमेटी को, शुल्क प्राप्त होने
के नब्बे वदनो ों के भीतर तथा देश में विवनमायण कायय के मामले में साठ वदनो ों के भीतर
विवनमायण कायय का मूल्ाोंकन करना होगा।
(8) अप्रेजल कमेटी अथिा इिैलुएशन कमेटी, जैसा भी मामला हो, शुल्क प्राक्तप्त के
साठ वदनो ों के भीतर सिम प्रावधकरण अथिा वनरीिण प्रावधकरण के रूप में मान्यता
के वलए आिदेन करने िाली फमय के कायय वनष्पादन का मूल्ाोंकन भी करेगी।
(9) मान्यता का प्रमाण-पि इिैलुएशन कमेटी द्वारा सोंयोंि के दौरे अथिा अप्रेजल
कमेटी की बैठक, जैसा भी मामला हो, की तारीख से पाोंच ि य की अिवध के वलए िैध
होगा, और मान्यता के निीकरण के मामले में, यवद इस विवनयम के अनुसार अपेवित
शुल्क के साथ निीकरण का आिेदन प्राप्त होता है, तो इन विवनयमो ों में वनधायररत
प्रवहृया का पालन करने के बाद फमय को मान्यता दी जा सकती है तथा आगे पाोंच ि य
की अिवध के वलए प्रमाण-पि जारी वकया जाएगा।
18. इिैलुएशन कमेटी अथिा अप्रेजल कमेटी द्वारा आिेदनो ं की जांच- (1) सवचि, के न्द्रीय
बॉयलर बोडय, वनरीिण प्रावधकरण के रूप में प्राप्त आिेदनो ोंको छोड़कर विवनयम 17 के उप-
विवनयम (1) के तहत प्राप्त सभी आिेदनो ों को, इस विवनयम के उप-विवनयम (2) के तहत
प्रश्नािली के साथ इिैलुएशन कमेटी को भेजेंगे।
(2) वनरीिण प्रावधकरण के रूप में मान्यता के वलए प्रश्नािली के उत्तर सवहत सभी आिेदन
अप्रेजल कमेटी को अग्रेव त वकए जाएोंगे।
(3) इिैलुएशन सवमवत या अप्रेजल कमेटी, जैसा भी मामला हो, उप-विवनयम (1) के तहत
सभी आिेदनो ोंतथा प्रश्नािली के उत्तरो ोंकी जाोंच करेगी, तथा—
(क) जहाों वनरीिण प्रावधकरण के रूप में मान्यता के वलए आिेदन वकया गया है,
िहाों अप्रेजल कमेटी वनम्नानुसार कर सकती है–
(i) अवतररि जानकारी, जो उि सवमवत द्वारा अपेवित है, के वलए उसके समि
स्पष्ट सीकरण देने हेतु वकसी भी आिेदक को बुला सकती है;
(ii) वकसी आिेदक फमय से वलक्तखत रूप में विशे अनुरोध प्राप्त होने पर अथिा वकसी
अप्रेजल कमेटी द्वारा वनणयय वकए जाने पर उि फमय के वनष्पादन के मूल्ाोंकन के20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वलए ऐसी फमय को दौरा कर सकती है, तथा इस प्रयोजन के वलए अप्रेजल कमेटी
आिेदक फमय के दौरे के वलए तीन सदस्ो ोंको वनयुि कर सकती है;
(ख) जहाों प्रख्यात सामग्री, जाोंच प्रयोगशाला, प्रख्यात शे जीिनकाल मूल्ाोंकन
सोंगठन, प्रख्यात इस्पात वनमायता, प्रख्यात फाउोंडरी अथिा फोजय, प्रख्यात ट्यूब अथिा
पाइप वनमायता अथिा के रूप में मान्यता के वलए आिेदन वकया गया है, िहाों इिैलुएशन
कमेटी, की गई जाोंच और विवनवमयत उत्पादो ों के कायय वनष्पादन की गुणित्ता के
मूल्ाोंकन के वलए ऐसी सामग्री जाोंच प्रयोगशाला तथा शे जीिनकाल मूल्ाोंकन
सोंगठन की प्रयोगशालाओ ों अथिा ऐसे इस्पात वनमायताओों, फाउोंडरी अथिा फाजय तथा
ट्यूब अथिा पाइप वनमायताओ ों के कारखानो ों का वनरीिण करेगी जहाों जाोंच और
विवनमायण वहृयाकलाप चलाए जा रहे हैं।
(4) इिैलुएशन कमेटी अथिा अप्रेजल कमेटी, जैसा भी मामला हो, इस बात से सोंतुष्ट स होने
के बाद वक विवनयम 23 और 24 में विवनवदयष्ट स आिश्यकताएों पूरी की गई हैं, मान्यता देने अथिा
अवीकीकार करने के सोंबोंध में सवचि, के न्द्रीय बॉयलर बोडय को ररपोटय प्रस्तुत करेगी।
19. सिम प्रावधकरण, वनरीिण प्रावधकरणो ंआवद के रूप में प्रख्यात फमष को मान्यता-
इिैलुएशन कमेटी अथिा अप्रेजल कमेटी, जैसा भी मामला हो, की ररपोटय की जाोंच करके
सवचि, के न्द्रीय बॉयलर बोडय आिेदक को मान्यता का प्रमाण-पि जारी कर सकता है।
बशते वक यवद सवचि, मान्यता को अवीकीकार करने का वनणयय करता है तो इसे
आिेदक को इसका कारण बताते हुए वलक्तखत रूप में सूवचत करना होगा।
20. मान्यता प्रमाण-पत्र की िैधता
विवनयम 19 के तहत जारी मान्यता प्रमाण-पि पाोंच ि य की अिवध के वलए िैध होगा।
21. मान्यता प्रमाण-पत्र का निीकरण – (1) मान्यता प्रमाण-पि के निीकरण की इच्छुक फमय
को प्रमाण-पि की िैधता समाप्त होने से कम-से-कम तीन महीने पहले सवचि, के न्द्रीय बॉयलर
बोडय को ऐसे निीकरण के वलए आिेदन करना होगा, जो इन विवनयमो ोंमें वनधायररत प्रवहृया का
पालन करने के बाद मान्यता प्रमाण-पि का निीकरण कर सकते हैं तथा ऐसा निीकरण अगले
पाोंच ि य की अिवध के वलए लागू होगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 21
(2) िैधता की अिवध को उस समय तक बाा हुआ माना जाएगा जब तक वक उप-
विवनयम (1) के अोंतगयत आिेदन प्राप्त होने के उपराोंत निीकरण के बारे में वनणयय नही ोंले
वलया जाता।
22. अपील - (1) यवद कोई फमय सवचि, के न्द्रीय बॉयलर बोडय द्वारा वदए गए वनणयय से असोंतुष्ट स है,
तो िह अध्यि, के न्द्रीय बॉयलर बोडय के समि अपील दायर कर सकती है।
(2) उप-विवनयम (1) के तहत अध्यि, के न्द्रीय बॉयलर बोडय द्वारा प्राप्त सभी आिेदनो ों पर के न्द्रीय
बॉयलर बोडय के परामशय से अध्यि द्वारा वनणयय वलया जाएगा।
23. इिैलुएशन कमेटी- (1)(क) इन विवनयमो ों के प्रयोजन के वलए, कें द्र सरकार द्वारा इिैलुएशन
कमेटी गठन वकया जाता है, वजसमें वनम्नवलक्तखत शावमल हैं:
(i) तकनीकी सलाहकार (बॉयलर) - अध्यि
(ii) राज्य, जहाों इकाई क्तस्थत है, के मुख्य वनरीिक (बॉयलर) - सदस्
(iii) कें द्र सरकार या भारतीय मानक ब्यूरो या बॉयलर और बॉयलर घटक वनमायताओ ों या राष्ट सरीय
प्रयोगशालाओ ों या इोंजीवनयररोंग परामशय एजेंवसयो ों या बॉयलर उपयोगकताय और अन्य
वहतधारको ोंका प्रवतवनवधत्व करने िाले बोडय का एक प्रवतवनवध - सदस्।
(ख) सवचि, कें द्रीय बॉयलर बोडय सदस्ो ोंको नावमत करेगा;
(2) इिैलुएशन कमेटी के कायष- (क) इिैलुएशन कमेटी इन वनयमो ों के प्रािधानो ों के अनुसार मान्यता
के वलए आिेदन करने िाली फमय के विशे रूप से वनम्नवलक्तखत िेिो ों में कायय वनष्पादन का
मूल्ाोंकन करेगी, अथायतट: -
(i) गुणित्ता प्रणाली;
(ii) सोंगठन;
(iii) गुणित्ता प्रणाली की समीिा;
(iv) प्रलेखीकरण-
(क) वनरीिण और जाोंच प्रवहृयाएों;
(ख) ररकॉडय;22 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ग) तकनीकी आोंकड़े;
(v) वनरीिण उपकरण;
(vi) खरीदी गई सामग्री अथिा सेिाओ ोंका वनरीिण-
(क) खरीद;
(ख) खरीद सोंबोंधी आोंकड़े;
(ग) वनरीिण वकए जाने िाले;
(घ) खरीदी गई सामग्री का सत्यापन;
(vii) प्रवहृयागत वनरीिण;
(viii) कारीगरी;
(ix) पूरी हो चुकी मदो ोंका वनरीिण और जाोंच;
(x) सैंपवलोंग प्रवहृया;
(xi) गैर-अनुरूप सामग्री का वनयोंिण;
(xii) वनरीिण क्तस्थवत को दशायना;
(xiii) उत्पाद गुणित्ता की सुरिा और सोंरिण –
(क) सामग्री की हैंडवलोंग;
(ख) भोंडारण;
(ग) सुपुदयगी;
(xiv) प्रवशिण।
(ख) सिम प्रावधकरण के रूप में मान्यता के वलए, इिैलुएशन कमेटी इन विवनयमो ों के प्रिाधानो ों के
अनुसरण में, इस प्रकार की मान्यता हेतु आिेदन करने िाली फमय के कायय वनष्पादन का मूल्ाोंकन
करेगी, विशे रूप में वनम्नवलक्तखत िेिो ोंमें, नामत: -
(i) फमय अथिा कों पनी पोंजीकृ त कों पनी होगी तथा एकल वीकावमत्व िाली नही ोंहोगी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 23
(ii) भारत में व्यापार करने हेतु, फमय को भारत में भी पोंजीकृ त वकया जाएगा।
(iii) सिम प्रावधकरण की ओर से अहयक िेल् डसय को प्रमाण-पि जारी करने के वलए उत् तरदायी
प्रावधकृ त हस् तािरकताय, सिम प्रावधकरण का कमयचारी होगा तथा उसे िेक्तल् डोंग के िेि में पाोंच
ि य के अनुभि के साथ ही इोंजीवनयर होना चावहए, जो मकै वनकल अथिा उत् पादन अथिा
धातुकमी अथिा िेक्तल्डोंग इोंजीवनयररोंग में वडग्री/ स् नातकोत् तर वडग्री अथिा रेवडयोग्राफी
तकनीको ोंमें स् तर-II के प्रमाण-पि धारक होना चावहए।
(iv) फमय अथिा कों पनी के पास वनम् नवलक्तखत सुविधाओ ों से यु् त कमयशाला होगी नामत:-
(क) नमूनो ोंकी िेक्तल्डोंग करने के वलए इलेक्तररक िेक्तल्डोंग सेट;
(ख) प्री-हीवटोंग सुविधाएों;
(ग) िेक्तल्डोंग के वलए प् लेटफाम् सय;
(घ) वनम् नवलक्तखत आोंतररक जाोंच मशीनें:
(i) यूनीिसयल टेक्तस्टोंग मशीन;
(ii) गैर-विध्वोंसक जाोंच (एनडीटी)- डाई पेवनटरेशन टेस् ट;
(iii) नमूने तैयार करने के वलए मशीनें;
(iv) कठोरता मापक (िैकक्तिक);
(ड.) रेवडयोग्राफी, ( नमूनो ों की सूक्ष् म ि स् थूल जाोंच) अनुमोवदत एजेंवसयो ों को आउटसोसय
हेतु की जा सकती है।
(च) भारत में पररचालन के वलए, उपयुयि सुविधाओ ों के साथ भारत में िकय शाप का
उपलब्ध होना भी अपेवित है;
(v) फमय को इन विवनयमो ोंके तहत िेल् डसय की परीिा की अपेिाओ ोंसे पररवलत होना चावहए।
(vi) वनरीिण प्रावधकरण िेल् डसय के आोंतररक सत् यापन के वलए सिम प्रावधकरण के रूप में भी
कायय कर सकता है तथा इस प्रयोजन के वलए ऐसी बाहरी एजेंसी की सुविधा ली जा सकती है जो
िेल् डसय के आोंतररक सत् यापन के वलए िेल् ड नमूनो ों के परीिण हेतु उपयुय् त सुविधाओ ों से यु् त हो,24 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
बशते वक इसमें उपयुय् त उप-खण्ड (iii) में यथा उक्तिक्तखत प्रावधकृ त हस् तािरकताय रोजगाररत
हो।
(ग) शे जीिनकाल मूल् याोंकन सोंगठन (आरएलएओ) के रूप में मायय ता के वलए, इिैलुएशन कमेटी
इन विवनयमो ों के प्रािधानो ों के अनुसरण में, आरएलएओ के रूप में मायय ता हेतु आिेदन करने िाली
फमय के काययवनष् पादन का मूल् याोंकन करेगी, विशे रूप से वनम् नवलक्तखत िेिो ोंमें, नामत: -
(i) 120 वक.ग्रा./ िगय सें.मी. प्रेशर से अवधक पर सोंचावलत बॉयलसय का शे जीिनकाल
मूल्ाोंकन (आरएलए) करने के वलए –
(क) बॉयलर वडजाइन, विवनमायण की जानकारी तथा बॉयलर के सोंचालन और रख-
रखाि, सामग्री, कोड और मानको ोंकी फील्ड आधाररत जानकारी;
(ख) प्रेशर पुजों घटक के जीिनकाल का मूल्ाोंकन करने के वलए असफलता
विश्ले ण, तनाि विश्ले ण में विशे ज्ञता;
(ग) धातुकमय, एनडीटी तथा अन्य आरएलए मूल्ाोंकन तकनीको में विशे ज्ञता;
(घ) आोंतररक ऑक्साइड मोटाई (आईओटी) माप तथा विश्ले णात्मक िमताएों;
(ङ) फमय अथिा कों पनी के पास वनम्नवलक्तखत होगों े –
(I) राष्ट सरीय जाोंच और अोंशाोंकन प्रयोगशाला प्रत्यायन बोडय (एनएबीएल) द्वारा
प्रत्यावयत प्रयोगशाला, वजसमें सैंपल ट्यूब, वडपोवजट की जाोंच के वलए इस िेि
से सोंबोंवधत विशे ज्ञ और आिश्यक उपकरण अथिा साधन शावमल होगों े;
(II) िॉटर िॉल (डब् ल् यूडब् ल् यू) वडपॉवजटटस और विलयन चयन के विश् ले ण के
विशे ज्ञो ों िाली प्रयोगशाला, वजनमें बॉयलरो ों की रसायवनक सफाई के वलए
वदशावनदेश जारी करने की िमता हो; (इसे आउटसोसय वकया जा सकता है)
(III) अहय कावमयको ोंसवहत एनडीटी प्रयोगशाला;
(IV) विवनयम 313 से 315 के अनुसार आरएलए परीिण करने के वलए स् थल
पर कायय करने हेतु कु शल और अनुभिी श्रमशक्ति;
(V) विवनयम 313 से 315 में यथावनधायररत बॉयलर के आरएलए अध् ययन के
वलए अपेवित सभी मापन और परीिण उपकरण; और[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 25
(VI) वनरीिण प्रावधकरण के अोंतगयत कम-से-कम पाोंच आरएलए अध् ययनो ों का
अनुभि।
(ii) 120 वक.ग्रा./िगय सें.मी. प्रेशर तक सोंचावलत बॉयलर आरएलए करने के वलए –
(क) बॉयलर वडजाइन, विवनमायण की जानकारी तथा बॉयलर के सोंचालन और रख-रखाि,
सामग्री, कोड और मानको ोंकी िेि जानकारी;
(ख) प्रेशर पुजों के घटक के जीिनकाल का मूल्ाोंकन करने के वलए असफलता विश्ले ण,
तनाि विश्ले ण की जानकारी;
(ग) धातुकमय, एनडीटी तथा अन्य आरएलए मूल्ाोंकन तकनीको ोंकी जानकारी;
(घ) आईओटी माप तथा विश्ले णात्मक िमताएों;
(ङ) फमय के पास वनम्नवलक्तखत होगों े –
(I) राष्ट सरीय जाोंच और अोंशाोंकन प्रयोगशाला प्रत्यायन बोडय (एनएबीएल) द्वारा प्रत्यावयत
प्रयोगशाला, वजसमें सैंपल ट्यूब, वडपोवजट की जाोंच के वलए इस िेि से सोंबोंवधत
विशे ज्ञ और आिश्यक उपकरण अथिा साधन शावमल होगों े (इय हें आउटसोसय भी
वकया जा सकता है);
(II) िॉटर िॉल (डब् ल् यूडब् ल् यू) वडपॉवजटटस और विलयन चयन के विश् ले ण के विशे ज्ञो ों
िाली प्रयोगशाला वजनमें बॉयलरो ों की रसायवनक सफाई के वलए वदशावनदेश जारी
करने की िमता हो(इय हें आउटसोसय भी वकया जा सकता है);
(III) अहय एनडीटी कावमयको ोंसवहत एनडीटी प्रयोगशाला;
(IV) विवनयम 313 से 315 के अनुसार आरएलए परीिण करने के वलए स् थल पर कायय
करने हेतु कु शल और अनुभिी श्रमशक्ति;
(V) विवनयम 313 से 315 में यथावनधायररत बॉयलर के आरएलए अध् ययन के वलए
अपेवित सभी मापन और परीिण उपकरण; और
(VI) वनरीिण प्रावधकरण के अोंतगयत कम-से-कम पाोंच आरएलए अध् ययनो ों का
अनुभि।26 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
24. अप्रेजल कमेटी (1) (क) अप्रेजल कमेटी की सोंरचना- इन विनयमनो ों के प्रयोजन हेतु "अप्रेजल
कमेटी" का अथय के न्द्रीय बॉयलर बोडय द्वारा गवठत सवमवत से है वजसमें वनम्नवलक्तखत शावमल हैं-
(i) तकनीकी सलाहकार (बॉयलर) - अध्यि;
(ii) राज्यो ों के बॉयलरो ों के पाोंच मुख्य वनरीिक या वनदेशक *वजन राज्यो ों में आिेदक फमों या
कों पवनयो ोंके पोंजीकृ त कायायलय क्तस्थत हैं, उनमें बॉयलर के मुख्य वनरीिक या वनदेशक शावमल
हैं+ - सदस्;
(iii) कें द्र सरकार या भारतीय मानक ब्यूरो या बॉयलर और बॉयलर घटक वनमायताओ ों या राष्ट सरीय
प्रयोगशालाओ ों या इोंजीवनयररोंग परामशय एजेंवसयो ों या बॉयलरो ों के उपयोगकताय और अन्य वहतो ों
का प्रवतवनवधत्व करने िाले बोडय के पाोंच सदस्; - सदस्
(ख) सवचि, कें द्रीय बॉयलर बोडय सदस्ो ोंको नावमत करेगा;
(2) अप्रेजल कमेटी के कायष- यह सवमवत, विवनयममो ंके प्रािधानो ंके अनुसरण में वनरीिण
प्रावधकरण के रूप में मान्यता के वलए आिेदन करने िाली फमष के कायष वनष्पादन का मूल्ांकन
करेगी, विशेर् रूप से वनम्नवलल्पखत िेत्रो ंमें, नामत:-
(i) फमय एक पोंजीकृ त कों पनी होगी, तथा भारत में अपने सोंचालन के वलए यह कों पनी भारत में पोंजीकृ त
की जाएगी;
स्पष्ट सीकरण- इस विवनयम के प्रयोजन के वलए एतद्दट िारा यह घो ण की जाती है वक एकल वीकावमत्व
िाली फमय वनरीिण प्रावधकरण के रूप में मान्यता के वलए आिेदन करने हेतु पाि नही ोंहै;
(ii) यह फमय इस प्रकार की होगी वक,-
(क) फमय भारतीय और अोंतरायष्ट सरीय कोड तथा मानको ों के तहत वनरीिण, सत्यापन एिों सोंबद्
वहृया-कलापो ोंके अवतररि वकसी अन्य िावणक्तज्यक गवतविवध में शावमल नही ोंहोगी;
(ख) फमय के पास आोंतररक वडजाइन और आरेख वनरीिण कायायलय होगा तथा भारत में
सोंचालन के वलए आोंतररक वडजाइन और आरेख वनरीिण कायायलय भारत में क्तस्थत होगा।
(ग) फमय के पास इन विवनयमो ों के अोंतगयत वनरीिण आिश्यकताओ ों को पूरा करने हेतु विवभन्न
कोडो ोंसवहत विवभन्न अोंतरायष्ट सरीय कोडटस की जानकारी होगी;[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 27
(घ) फमय सिम व्यक्तियो ोंको वनयुि करेगी, वजनके पास भारत में कायय करने के वलए विवनयम
25(5)(ग)(i) के तहत जारी वकया गया के न्द्रीय बॉयलर बोडय प्रावधकार काडय होगा;
(ड.) फमय के पास सुस्थावपत तथा प्रलेक्तखत गुणित्ता काययहृम होगा, वजसे इन विवनयमो ों के
अनुसार वनरीिण आिश्यकताओ ोंको पूरा करने करने वलए स्थावपत तथा बनाए रखा गया हो;
(च) फमय के पास बॉयलर के वनरीिण और सत्यापन के वलए अपनी सोंगठन में काययरत प्रत्येक
सिम व्यक्ति का सम्पूणय वििरण होगा;
(छ) फमय के पास सिम व्यक्तियो ोंके वलए प्रवशिण काययहृम होगा।
25. सिम व्यल्पि की मान्यता के वलए प्रवहृया
(1) (क) यह विवनयम एकसमान अहयता, जाोंच, सिम व् यक्ति के रूप में कें द्रीय बॉयलर बोडय प्रमाणन
जारी करने तथा निीकरण करने की आिश् यकता की व् यिस्थ ा करता है; तावक अवधवनयम के तहत
सिम व् यक्ति को, विवनमायण, वनमायण, प्रचालन और रखरखाि के दौरान पूरे भारत में बॉयलसय के
वनरीिण और सत्यापन की अनुमवत दी जा सके ।
(2) आिश्यक न्यूनतम योग्यता और अनुभि वनम्नानुसार हैं:-
(क) मायय ता प्राप्त सोंस् थान से मकै वनकल इोंजीवनयररोंग अथिा उत् पादन अथिा विदटयुत सोंयोंि
अथिा धातुकमीय इोंजीवनयररोंग में स् नातक हो;
(ख) बॉयलसय से सोंबोंवधत वनम् नवलक्तखत िेिो ों में अके ले या समग्र रूप से कम-से-कम पाोंच ि य
का अनुभि:-
(i) वडजाइन;
(ii) विवनमायण;
(iii) कमीशन;
(iv) प्रचालन और रखरखाि;
(v) विवनमायण अथिा प्रचालन और रखरखाि के दौरान वनरीिण तथा सत् यापन;
(vi) उच् च प्रेशर िाला िेक्तल्डोंग वनरीिण;28 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ग) इोंवडयन सोसायटी फॉर नॉन-वडस् टरक्तरि टेक्तस्टोंग (आईएसएनटी) अथिा अमेररकन
सोसाइटी फॉर नॉन-वडस्टरक्तरि टेक्तस्टोंग (एएसएनटी) या रेवडयोग्राफी और अल् टरासॉवनक टेक्तस्टोंग
में गैर-विध् िोंसक तरीको ों में आईएसएनटी या एएसएनटी द्वारा मायय ता प्राप्त वकसी अय य पेशेिर
वनकाय से श्रेणी-II का एनडीटी प्रमाण-पि।
(3) कें द्रीय बॉयलसय बोडय परीिा स्थायी सवमवत की सोंरचना:- (क) इन विवनयमो ोंके प्रयोजन के वलए,
कें द्रीय बॉयलसय बोडय परीिा स्थायी सवमवत" का अथय कें द्रीय बॉयलसय बोडय द्वारा गवठत एक सवमवत है,
वजसमें वनम्नवलक्तखत शावमल हैं-
(i) तकनीकी सलाहकार (बॉयलर) - अध्यि
(ii) राज्यो ोंसे बॉयलर के दो मुख्य वनरीिक या वनदेशक - सदस्
(iii) कें द्र सरकार या भारतीय मानक ब्यूरो या बॉयलर और बॉयलर घटक वनमायताओ ों या राष्ट सरीय
प्रयोगशालाओ ों या इोंजीवनयररोंग परामशय एजेंवसयो ों या बॉयलरो ों के उपयोगकताय और अन्य वहतो ों
का प्रवतवनवधत्व करने िाले बोडय के दो सदस् – सदस्
(ख) सवचि, कें द्रीय बॉयलर बोडय, सदस्ो ोंको नावमत करेगा;
(4) कें द्रीय बॉयलर बोडय परीिा के वलए प्रवहृया वनम्नानुसार होगी:
(क) कें द्रीय बॉयलसय बोडय स् थायी परीिा सवमवत अथिा इसके द्वारा प्रावधकृ त एजेंसी अथिा िेिीय
स् थायी परीिा सवमवत द्वारा वनम् नवलक्तखत विवध से परीिा आयोवजत की जाएगी, नामत:-
(i) वलक्तखत परीिा में बॉयलर का वडजाइन, विवनमायण, प्रचालन और अनुरिण, गैर-
विध् िोंसक परीिण तकनीकें , इन विवनयमो ोंके अनुसार विवनमायण के दौरान बॉयलसय का
वनरीिण और प्रमाणीकरण तथा उसका उपयोग शावमल होगा (70 प्रवतशत भाररता);
(ii) मौक्तखक परीिा हेतु अहयता के वलए अय थी को प्रत्येक वलक्तखत पेपर में 45 प्रवतशत
और कु ल वमलाकर कम-से-कम 60 प्रवतशत अोंक प्राप् त करने होगों े;
(iii) उपयुय् त से सोंबोंवधत मौक्तखक परीिा (30 प्रवतशत भाररता);
(iv) परीिा उत्तीणय करने के वलए, अभ्यथी को कु ल प्राप्ताोंक में से कम से कम 60 प्रवतशत
अोंक प्राप्त करने होगों े (वलक्तखत परीिा की भाररता 70 प्रवतशत और मौक्तखक परीिा की
भाररता 30 प्रवतशत होगी)
(v) कें द्रीय बॉयलसय बोडय, परीिा उत्तीणय करने के बाद अ यथी को उत्तीणय श्रेणी का प्रमाण-
पि जारी करेगा।‛;
(ख) कें द्रीय बॉयलर बोडय परीिा में भाग लेने के वलए कें द्रीय बॉयलर बोडय स् थायी परीिा सवमवत द्वारा
तथा ऐसे स् थान और समय पर उपलब् ध कराए गए प्रारूप में आिेदन वकया जाएगा जैसा वक कें द्रीय[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 29
बॉयलर बोडय स् थायी परीिा सवमवत अथिा इसके द्वारा प्रावधकृ त एजेंसी अथिा िेिीय स् थायी परीिा
सवमवत द्वारा वनणयय वकया गया हो।
(5) कें द्रीय बॉयलर बोडष प्रावधकृ त के वलए प्रवहृया वनम्नानुसार होगी:
(क) सिम व् यक्ति को वहतो ोंमें टकराि के वबना कायय करना होगा;
(ख) कें द्रीय बॉयलर बोडय प्रमाणन हेतु आिेदक को वनम् नवलक्तखत शतें पूरी करनी होगों ी, नामत:
--
(i) आिेदक कें द्रीय बॉयलर बोडय से मायय ताप्राप्त वनरीिण प्रावधकरण का वनयवमत
कमयचारी अथिा उसके द्वारा काययरत व् यक्ति होगा:
बशते वक अवधवनयम की धारा 13 के तहत इस् तेमाल के दौरान बॉयलर के
वनरीिण और सत् यापन के वलए आिेदक कें द्रीय बॉयलर बोडय से मायय ता प्राप् त वनरीिण
प्रावधकरण में कायय वकए वबना भी स् ितोंि रूप से कायय कर सकता है;
(ii) आिेदक को इस विवनयम के उप-विवनयम (2) में यथासोंदवभयत य यूनतम
अहयताओ ोंऔर अनुभि सोंबोंधी आिश् यकताओ ों को पूरा करना होगा;
(iii) आिेदक को इस विवनयम के उप-विवनयम (4) में यथासोंदवभयत कें द्रीय बॉयलर
बोडय परीिा में भाग लेना और तथा उसे पास करना होगा;
(iv) आिेदक को कें द्रीय बॉयलर बोडय परीिा पास करने के तीन ि य के भीतर
प्रावधकार हेतु आिेदन करना होगा तथा यवद वकसी व् यक्ति का प्रावधकार तीन
ि य की अिवध के भीतर जारी नही ों वकया जाता है तो उसके वलए कें द्रीय
बॉयलर बोडय परीिा में भाग लेना और पास करने योग् य श्रेणी प्राप्त करना
अपेवित होगा; तथा
(v) सिम व् यक्ति के वलए अवधकतम आयु पैंसठ ि य होगी बशते वक व् यक्ति
वचवकत्सकीय दृवष्ट सकोण से वफट हो;
(ग)30 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(i) जब आिेदक खण्ड ख में वदये अनुसार और पािता अपेिाओ ों को पूरा करता
है तब उसके वनयोिा के अनुरोध पर कें द्रीय बॉयलर बोडय से प्रावधकार पि और एक
प्रमाणपि जारी वकया जाएगा:
बशते वक अवधवनयम की धारा 13 के अोंतगयत, उपयोग के दौरान, के िल
बॉयलर के वनरीिण और प्रमाणन के वलए, आिेदक द्वारा भी प्रावधकार पि हेतु
अनुरोध वकया जा सकता है;
(ii) प्रावधकार के वलए आिेदन कें द्रीय बॉयलर बोडय से प्राप्त फॉमय में वकया जाएगा;
और
(iii) सिम व् यक्त् त के पास माि एक िैध प्रावधकार पि होना चावहए।
(घ)
(i) प्रावधकार प्रमाण-पि जारी वकए जाने की तारीख से तीन ि य अथिा वनरीिण
प्रावधकरण की वनयुक्ति की मायय ता अिवध तक कोटवमयनस आधार पर (जहाों
लागू हो) जो भी पहले हो, िैध होगा;
(ii) विवनमायण और वनमायण के दौरान बॉयलसय का वनरीिण और सत् यापन करने के
वलए, सिम व् यक्ति कें द्रीय बॉयलर बोडय से मायय ता प्राप् त वनरीिण प्रावधकरण
में वनयवमत रूप से काययरत हो, वजसके न होने पर प्रावधकार रद्द हो जाएगा;
(iii) सिम व् यक्ति द्वारा कायय छोड़ने पर कें द्रीय बॉयलर बोडय प्रावधकार काडय
वनरीिण प्रावधकरण द्वारा कायय छोड़ने की तारीख से सात वदनो ों के भीतर
सवचि, कें द्रीय बॉयलर बोडय को लौटाया जाएगा;
(iv) सिम व् यक्ति के वनयोिा द्वारा निीकरण का अनुरोध वकया जाएगा तथा
अनुरोध में यह सत् यावपत वकया जाएगा वक वनरीिण वहृयाकलाप करके अथिा
उनका पययिेिण करके सिम व् यक्ति ने वनरीिण कु शलता बनाए रखी है तथा
उस व् यक्ति ने इस उप-खोंड (vi) में यथा वनधायररत अद्यतन अपेिाओ ों को
लगातार पूरा वकया है;
बशते वक बॉयलर अवधवनयम, 2025 की धारा 13 के तहत के िल बॉयलर का
वनरीिण तथा सत् यापन करने के वलए प्रावधकार के निीकरण का अनुरोध[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 31
सिम व् यक्ति द्वारा भी वकया जा सकता है, वजसमें वपछले तीन ि ों के दौरान
वकए गए वनरीिण का ब् यौरा वदया जाए तथा यह पुवष्ट स की जाए वक उसने इस
उप-विवनयम के खोंड (vi) में दी गई वनरोंतर अद्यतन अपेिाओ ों को पूरा वकया
है;
(v) रोजगार में बदलाि होने पर, सिम व् यक्ति के ितयमान वनयो् ता द्वारा कें द्रीय
बॉयलर बोडय से प्राप्त प्रपिो ोंमें प्रावधकार काडय का अनुरोध वकया जाएगा।
(vi) कें द्रीय बॉयलर बोडय द्वारा प्रावधकृ त प्रत्य ेक सिम व् यक्ति को हर तीन ि य में
कम-से-कम एक बार या तो कें द्रीय बॉयलर बोडय के सम् मेलन में भाग लेगा
अथिा वनरीिण से सोंबोंवधत अनुदेशो ों को प्राप्त कर सकता है तथा ये अनुदेश
वकसी भी रूप में हो सकते हैं, जैसे ् लासरूम, घर पर अध् ययन अथिा िेब
आधाररत; इसके अोंतगयत शावमल वि यो ों में वनरीिण प्रवहृया के वलए प्रासोंवगत
वि य शावमल हो सकता है, जैसे नई पद्वतयाों, उत् पाद, सामग्री, प्रौद्योवगकी
अथिा वनमायण या मरम् मत कोड में बदलाि;
(vii) ऐसा व् यक्ति वजसके प्रावधकार का पाोंच ि ों या इससे कम अिवध से निीकरण
नही ों वकया गया है, उसका, उवचत आिेदन के आधार पर, प्रावधकार बहाल
वकया जा सकता है;
(viii) यवद वनयो् ता अथिा सिम व् यक्ति, जैसा भी मामला हो, स् ितोंि रूप से कायय
कर रहा है, तो िह उप-खोंड (vi) में यथाउक्तिक्तखत वनरोंतर अद्यतन वकए जाने
के सोंबोंध में प्रमाणन उपलब् ध कराएगा; तथा
(ix) ऐसा व् यक्ति वजसका प्रावधकार, पाोंच ि य से अवधक अिवध से निीनीकृ त नही ों
वकया गया है, उसके वलए कें द्रीय बॉयलर बोडय परीिा में भाग लेना और उसमें
पावसोंग श्रेणी प्राप्त करना अपेवित होगा;
(ङ)
(i) वकसी आिेदन में वनवहत वििरण में गलत जानकारी देने पर कें द्रीय बॉयलर
बोडय का प्रावधकार सवचि, कें द्रीय बॉयलर बोडय द्वारा िापस वलया जा सकता है,
हालाोंवक िह व् यक्ति सवचि, कें द्रीय बॉयलर बोडय को पुन: विचार करने हेतु
अनुरोध कर सकता है;32 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ii) जब वकसी मूल् याोंकन से यह पता चलता है वक कें द्रीय बॉयलर बोडय द्वारा
प्रावधकृ त व् यक्ति अपने कत् तयव् यो ों का पालन करने में लापरिाह है अथिा उसने
कत् तयव् यो ों के प्रलेखीकरण में इस् तेमाल प्रपिो ों में गलत वििरण वदया है, तो इस
प्रयोजन के वलए गवठत कें द्रीय बॉयलर बोडय सवमवत, मूल् याोंकन की जाोंच कर
सकती है तथा सवचि, कें द्रीय बॉयलर बोडय को ऐसे सिम व् यक्ति के विरुद्
उवचत कारयिाई करने की वसफाररश कर सकती है। सवचि, कें द्रीय बॉयलर
बोडय इस मामले में वनणयय लेगा;
(iii) यवद कोई व् यक्ति सवचि, कें द्रीय बॉयलर बोडय के वनणयय से असोंतुष् ट है तो इस
वनणयय की तारीख से तीस वदनो ों के भीतर कें द्रीय बॉयलर बोडय के समि ऐसे
वनणयय के विरुद् अपील कर सकता है;
(iv) कें द्रीय बॉयलर बोडय का वनणयय बाध् यकारी होगा; तथा
(v) यवद कोई व् यक्ति वनम् नवलक्तखत से असोंतुष् ट है –
(क) इस अवधवनयम द्वारा प्रदत् त अथिा इस अवधवनयम के अधीन शक्ति का
प्रयोग करते हुए सिम व् यक्ति द्वारा वकया गया अथिा वकए जाने के वलए
आशवयत आदेश; तथा
(ख) सिम व् यक्ति द्वारा कोई आदेश अथिा प्रमाण-पि जारी करने से
इनकार करना वजसे बनाना अथिा जारी करना उसके वलए अपेवित अथिा
इस अवधवनयम के तहत आिश् यक है;
तो, िह ऐसे आदेश अथिा अस् िीकृ वत के बारे में उसे सूवचत वकए जाने
की तारीख से तीस वदनो ों के भीतर, उस राज् य, जहाों िह बॉयलर क्तस्थत है, के
मुख् य बॉयलर वनरीिक को, ऐसे आदेश अथिा अस् िीकृ वत के विरुद् अपील
कर सकता है;
(च) जारी, निीनीकृ त अथिा बहाल वकए गए प्रत्य ेक प्रावधकार के वलए कें द्रीय बॉयलर बोडय
स् थायी जाोंच सवमवत द्वारा वनयत शुल् क का भुगतान वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 33
(6) कें द्रीय बॉयलर बोडय प्रावधकार सोंख् या उसके द्वारा प्रयु् त सभी भारतीय बॉयलर विवनयम प्रपिो ों
में दजय होगी तथा वनरीिण के साक्ष् य के रूप में वनरीवित और मुद्राोंवकत मदो ोंपर लगाई जाएगी और यह
प्रावधकार सोंख् या सिम व् यक्ति की डायरी में भी दजय की जाएगी।
(7) (क) सिम व् यक्ति द्वारा वनम् नवलक्तखत के वलए डायरी रखी जाएगी:-
(i) वनमायण वहृयाकलापो ोंका वनरीिण; और
(ii) कें द्रीय बॉयलसय बोडय द्वारा वनधायररत प्रारूप के अनुसार प्रत्य ेक स् थान अथिा स् थल
के वलए मरम् मत और बदलाि सवहत सेिागत वनरीिण;
(ख) डायरी बाउोंड होगी और उसमें नोंबर वलखे हुए होगों े तथा इस डायरी का प्रयोजन सिम
व् यक्ति के वहृयाकलापो ों का ररकॉडय उपलब् ध कराना तथा वनरीिण की वनरोंतरता की
प्रवहृया में सहायता करना है;
(ग) सिम व् यक्ति की डायरी, जहाों भी लागू हो, वनयो् ता वनरीिण प्रावधकरण की सम् पवत्त
होगी तथा यह वनरीिण के स् थान अथिा स् थल पर अिश् य उपलब् ध होनी चावहए; तथा
(घ) अोंवतम प्रविवष्ट स की तारीख से कम-से-कम पाोंच ि ों की अिवध के वलए इस डायरी का
रखरखाि वकया जाएगा तथा यह ऑनलाइन प्रविवष्ट सयो ों के प्रािधानो ों सवहत वडवजटल
रूप में भी रखी जाएगी;
(8) सिम व्यक्ति के कतयव्यो ोंऔर वजम्मेदाररयो ोंमें वनम्नवलक्तखत शावमल होगों े, अथायतट: –
(क) बॉलयर के इस् तेमाल के वलए प्रमाण-पि के निीकरण हेतु आिेदन प्राप्त होने पर, सिम
व् यक्ति, ऐसा आिेदन प्रापट त होने की तारीख से पोंद्रह वदन के भीतर बॉयलर का वनरीिण
करेगा, वजसकी तारीख की सूचना बॉयलर के मावलक को अवग्रम रूप से दी जाएगी;
(ख) सेिारत बॉयलरो ों के वलए, वनरीिण पुस् तक के ज्ञापन की प्रवत सोंबोंवधत बॉयलर
वनरीिणालय से वनरीिण प्रावधकरण के जररए अथिा यवद स् ितोंि रूप से कायय कर रहा है, तो
प्रत्य ि रूप से, प्राप्त की जाएगी, वजसे वपछले वनरीिण के पूरा होने की तारीख से एक सप् ताह
की अिवध के भीतर, इसमें आिश् यक प्रविवष्ट सयाों करने के वलए, लौटाया जाएगा;
(ग) सिम व् यक्ति विवभय न चरणो ोंमें, वनम् नवलक्तखत कतयव् यो ोंका भी पालन करेगा, नामत: -34 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
I. विवनमाषण तथा कमीशवनंग के दौरान वनरीिण: -
(क) इन विवनयमो ों में वनवहत प्रािधानो ों के अनुसार, बॉयलर के विवनमायण, वनमायण और कमीशन
के दौरान वनरीिण के वलए वनरीिण प्रावधकरण की सोंतुक्तष् ट के अनुसार कायय करना;
(ख) पररवशष् ट-क में दी गई प्रवहृया के अनुसार विवनमायण और वनमायण के दौरान वनरीिण
करना;
II. सेिाकालीन वनरीिण: -
(क) जाोंच करना वक स् टैक्तम् पोंग अथिा नामपट्ट पठनीय है और वनरीिण दस् तािेज में
िवणयत मद को प्रदवशयत करता है;
(ख) बाह्य और आोंतररक वनरीिण करना तथा वकसी भी अपेवित प्रेशर परीिण का
सािी रहना;
(ग) बॉयलर के स् िामी को, अनुपालन नही ोंकी जा रही वकन्ही ोंशतों, यवद कोई हो,ों
सवहत वनरीिण पररणामो ोंके सोंबोंध में सूवचत करना;
III. मरम् मत और पररितषन: -
(क) जाोंच करना वक बॉयलर स् िामी ने वलक्तखत रूप में मुख् य वनरीिक को सूवचत
कर वदया है और प्रमाण-पि के कायय िेि में यह गवतविवध अनुमत है अथिा
सोंरचनात् मक पररितयन, पररिधयन अथिा निीकरण उनके पययिेिण में वकया गया है;
(ख) सत्यावपत करना वक बॉयलर के मरम् मत कताय के पास इन विवनयमो ों में
विवनवदयष्ट स िैध प्रमाणपि है;
(ग) गुणित् ता वनयोंिण प्रणाली की मानीटररोंग और सत्यावपत करना वक प्रणाली का
कायायय ियन विवनयमो ोंकी अपेिाओ ोंके अनुसार वकया जा रहा है;
(घ) जाोंच करना वक सभी सामवग्रयाों इन विवनयमो ोंके अनुरूप है;
(ङ) सत्यावपत करना वक सभी िेक्तल् डोंग प्रवहृया विवशष् टताएों, प्रवहृया अहयता ररकॉडय
और िेल् डर तथा िेक्तल् डोंग प्रचालन ररकॉडय इन विवनयमो ोंके अनुरूप हैं;
(च) सत्यावपत करना वक इन विवनयमो ों के अोंतगयत यथा यथापेवित ताप प्रवहृया की
गई और उसे उवचत रूप से दस् तािेजो ोंमें दजय वकया गया;[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 35
(छ) सत्यावपत करना वक इन विवनयमो ों के अोंतगयत यथापेवित नॉन-वडस् टरक्त् टि
जाोंच और परीिण वकए गए और उन्हें उवचत रूप से दस् तािेज में दजय वकया गया;
(ज) इन विवनयमो ोंके अोंतगयत यथापेवित प्रेशर परीिण का सािी रहना;
(झ) सत्यावपत करना वक फॉमय में प्रदान की गई सूचना सही है और ब् यौरे उवचत
रूप से पोंच वकए गए हैं;
(ञ) स् टैंवपोंग का सही होना सत्यावपत करना।
(9) सिम व् यक्त् त अथिा वनरीिण प्रावधकारी, वनरीिण के वलए शुल् क ले सकता है बशते वक यह
शुल् क सोंबोंवधत राज् य द्वारा वनधायररत शुल् क से कम नही ोंहोना चावहए।
(10) ये वनरीिण, इन विवनयमो ों वदए गए प्रािधानो ों के अनुसार वकए जाएगे और सोंबद् प्रमाण पि
वनम् नानुसार जारी वकए जाएोंगे, नामत: -
(क) सेिाकालीन बॉयलर वनरीिण के वलए:
(i) वनरीिण के वदन बॉयलर के स् िामी को एक प्रवत दी जाएगी;
(ii) एक प्रवत वनरीिण पुक्तस् तका ज्ञापन (फॉमय-XI) के साथ मुख् य वनरीिक को दी जाएगी;
(iii) एक प्रवत पुक्तस् तका में रहेगी;
(iv) यवद इन विवनयमो ों में िवणयत अनुसार वनरीिण नही ों वकया जाता है, तो मुख् य वनरीिक,
बॉयलर, सिम व् यक्त् त के विरूद् समुवचत कारयिाई करने, वजसमें उसके प्रावधकार पि
को रद्द करना शावमल हो सकता है, के वलए सवचि, कें द्रीय बॉयलर बोडय को इस मामले
की सूचना देगा।
(ख) विवनमायण के दौरान वनरीिण के वलए:
(i) एक प्रवत विवनमायता को दी जाएगी;
(ii) एक प्रवत वनरीिण प्रावधकारी को दी जाएगी;
(ग) वनमायण के दौरान वनरीिण के वलए:
(i) एक प्रवत बॉयलर के स् िामी को दी जाएगी;
(ii) एक प्रवत मुख् य वनरीिक को दी जाएगी;36 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iii) एक प्रवत वनरीिण प्रावधकारी के पास रहेगी।
26. फॉमूषले का संशोधन
[1] बॉयलसय के विवभय न वहस् सो ों पर अवधकतम अनुमत काययशील प्रेशर के वनधायरण के वलए सामग्री,
वजस पर यह फॉमूयला लागू हो, िह इसके विपरीत वकसी प्रािधान के अभाि में ऐसा होना
चावहए जो अध् याय 2 की अपेिाओ ोंको पूरा करता हो।
[2] जहाों प् लेटटस के वलए कोई परीिण प्रमाण-पि प्रस् तुत नही ोंवकया जाता, िहाों सामग्री को आयरन
माना जाएगा, यवद वनरीिण प्रावधकारी सोंतुष् ट है वक यह सामग्री उपयुि बॉयलर गुणित् ता के
अनुरूप है। यवद वकसी ऐसे मामले में, वजसमें वनरीिण प्रावधकारी पूणयत: सोंतुष् ट है वक सामग्री
उच् च गुणित् ता की है, तो आयरन के वलए अनुमवत से अवधक िमता की अनुमवत दी जा सकती
है, परोंतु प् लेटटस की िमता, विशे कारणो ों के अवतरर् त, को 37 वकग्रा/िगय वममी से अवधक
माना जाएगा। ऐसे मामलो ों में तय यता और वशयर िमता का मान, स् टील के वलए 37 वकग्रा/िगय
वममी और 30 वकग्रा/िगय वममी से अवधक और आयरन के वलए 30 वकग्रा/िगय वममी और 25
वकग्रा/िगय वममी से अवधक नही ोंहोना चावहए। आयरन के वलए सभी स् थानो ों पर तय यता िमता
25 वकग्रा/िगय वममी होनी चावहए।
[3] कॉपर की फ्लैट प् लेटटस के वलए सूि के आधार पर प्राप् त काययशील प्रेशर से, 50 प्रवतशत कम
अनुमत काययशील प्रेशर होना चावहए।
[4] जब सामग्री की गुणित् ता और स् टील पाइप का वनमाणय फॉमय IV-(ख) में विवनमायता द्वारा प्रमाण
पि से समवथयत न हो, तो पाइपो ोंका परीिण एक परीिणशाला में वकया जाएगा और अवधकतम
अनुमत काययशील तनाि िह होगा जैसा वक वनरीिण प्रावधकारी अपने वििेक से वनधायररत
करेगा।
27. सामग्री की अवधप्राक्तप्त - (1) जहाों कम मािा के कारण वमलो ों से सीधे सामग्री खरीदना सोंभि
नही ोंहै, िहाों वनम्नवलक्तखत विवध अपनाई जाएगी, अथायतट:-
(क) सामग्री जो पूणयत: पहचान योग् य हो, विवनमायता द्वारा सामग्री परीिण ररपोटय द्वारा समवथयत हो
लेवकन इन विवनयमो ोंके अोंतगयत फॉमय द्वारा किर न की जाती हो:-
(i) जब कोई सामग्री वमल द्वारा अनुप्रयु् त सोंपूणय पहचान वच्ो ों के साथ प्राप्त होती है
और सामग्री परीिण ररपोटय द्वारा समवथयत होती है तो बॉयलर, बॉयलर सोंघटक
और पुजों का विवनमायता, वनरीिण प्रावधकारी को इस बात से सोंतुष् ट करेगा वक[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 37
सामग्री सोंबोंधी विवशष् टता और विवनयम की सभी विवनवदयष् ट अपेिाओ ों को पूरा
वकया गया है।
(ii) सामग्री विवनमायता द्वारा जारी सामग्री परीिण ररपोटय, जाोंच के वलए वनरीिण
प्रावधकारी को प्रस् तुत की जाएगी।
(iii) वनरीिण प्रावधकारी द्वारा वनधायररत कोई भी अवतरर् त परीिण, परीिण शाला में
वकया जाएगा और उसके पररणामो ोंको दस् तािेज में दजय वकया जाएगा।
(iv) फॉमय IV (ख), विवशष् टता, आकार, मािा, ररपोटय वकए गए परीिण पररणाम के साथ
तैयार वकया जाएगा और उस पर बॉयलर, बॉयलर सोंघटक अथिा पुजों के
विवनमायता और वनरीिण प्रावधकारी द्वारा सोंयु् त रूप से हस् तािर वकए जाएोंगे।
(ख) सामग्री जो उत् पादन लॉट हेतु वमल मावकिं ग के साथ पूणयत: पहचान योग् य हो, परोंतु सामग्री
जाोंच ररपोट और इन विवनयमो ोंके अोंतगयत प्रपिो ोंद्वारा समवथयत न हो:-
(i) बॉयलर, बॉयलर सोंघटक अथिा पुजों का विवनमायता, ऐसी सामग्री को वनरीिण
प्रावधकारी को वमल द्वारा माकय वकए अनुसार प्रस् तुत करेगा। वशवपोंग दस् तािेज
और अथिा खरीद ऑडयर अथिा, जैसा भी मामला हो, डरॉइोंग को भी, सामग्री की
अपेवित विवशष् टता को स् थावपत करने के वलए प्रस् तुत करना होगा।
(ii) सामवग्रयो ों का परीिण, सामग्री विवशष् टता और इन विवनयमो ों की अवतरर् त
अपेिाओ,ों यवद कोई हो,ों के अनुसार वकया जाएगा।
(iii) परीिण के वलए नमूनो ों की सोंख् या का वनधायरण, जाोंच प्रावधकारी द्वारा वकया
जाएगा। परोंतु यह सोंदभायधीन मािा के 10 प्रवतशत से कम नही ोंहोना चावहए।
(iv) परीिण पररणामो ों को फॉमय IV(खण्ड-ख) दजय वकया जाएगा, वजस पर विवनमायता
और वनरीिण प्रावधकारी के हस् तािर होगों े।
(v) इस सोंबोंध में उपयुयि िवणयत अनुसार, अहयता प्राप्त प् लेट अथिा शीट का उपयोग,
बॉयलर शैल अथिा डरम वनमायण में करने की अनुमवत नही ोंहोगी।
28. सामवग्रयो ंहेतु मानक विवशष्ट ताएं
स् टील रॉट आयरन और कॉपर प् लेटटस तथा बासय, और कास् ट स् टील के वलए मानक विवशष् टताएों
िही ोंहोगों ी जैसा वक अध् याय-2 में िवणयत हैं।38 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
29. ऐसे पुराने बॉयलरो ंका पंजीकरण जो मानक ल्पथ वतयो ंके अनुरूप नही ंहैं - यवद कोई पुराना
बॉयलर पोंजीकरण के वलए इन विवनयमो ों की अपेिाओ ों के अनुरूप नही ों पाया जाता है, तो उसे
वनम् नवलक्तखत मामलो ोंको छोड़कर, पोंजीकृ त नही ोंवकया जाएगा, नामत: -
(1) िाटर ट्यूब बॉयलर- जब इसके पोंजीकरण के वलए इसके विवनमायण के कोड के तहत
अपेवित दस् तािेज प्रस् तुत कर वदया जाए और इसकी काययकु शलता में वकसी भी रूप में शोंका
न हो तो पुराने िाटर ट्यूब बॉयलर को, विवनयम के सोंदभय में बॉयलर के वहस् सो ों के वलए
पररकवलत काययशील प्रेशर को 10 प्रवतशत तक कम करके पोंजीकृ त वकया जा सकता है:
बशते वक उच् चतर काययशील प्रेशर, जो विवनमायता के कोड द्वारा अनुमत काययशील
प्रेशर से अवधक नही ोंहोगा, की अनुमवत बॉयलर पर काययकाल सोंबोंधी आकलन परीिण करने
के आधार पर बोडय की सोंस् तुवत पर दी जा सकती है।
(2) शेल टाइप बॉयलर- जब इसके पोंजीकरण के वलए इसके विवनमायण के कोड के तहत
अपेवित दस् तािेज प्रस् तुत कर वदया जाए, तो पुराने शेल टाइप बॉयलर को, विवनयम से
पररकलन द्वारा बॉयलर के वहस् सो ों के काययशील प्रेशर को नीचे दी गई तावलका के अनुसार कम
करके पोंजीकृ त वकया जा सकता है:
तावलका1/1
बॉयलर की कायय अिवध(पहले उपयोग 25 35 45 50 60 70 80 90 100
की तारीख से) ि य में
काययशील प्रेशर में कमी (प्रवतशत) 5 10 15 20 30 40 50 60 70[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 39
अध् याय- 2
वनमाषण की सामग्री
भाग-I
30. काबषन, एलॉय, ट ेनलैस ट ील और वनवकल एलॉय ग्रेड की प् लेटें, पाइप, ट्यूब, काल्पटंग,
फोवजिंग और वफवटंग – (1) इन विवनयमो ोंमें काबयन, एलॉय, स् टेनलैस स् टील और वनवकल एलॉय ग्रेडटस
की बॉयलर प् लेट, ट्यूब, पाइप, काक्तस् टोंग् स, फॉवजिंग् स और वफवटोंग् स को शावमल वकया गया हैं और ये सभी
मामलो ोंमें इसमें विवनवदयष्ट स आिश्यकताओ ोंका पूणय रूप से अनुपालन करेंगे।
(2) अय य राष् टरीय अथिा अोंतरायष्ट सरीय मानको ोंका अनुपालन करने िाली सामग्री वजय हें बॉयलर प् लेटटस,
ट्यूब् स, पाइप् स, काक्तस् टोंग् स, फॉवजिंग् स और वफवटोंग् स के तौर पर उपयोग के वलए उपयु् त होने के
कारण सामाय य तौर पर उपयोग वकया जाता है, को राष् टरीय अथिा अोंतरायष्ट सरीय मानको ों के
पदनाम के साथ भी उपयोग वकया जा सकता है बशते वक ऐसी सामवग्रयाों इन विवनयमो ों द्वारा
विवशष् ट रूप से वनव द् न हो।ों
(3) अन्य राष्ट सरीय या अोंतरायष्ट सरीय मानको ों के अनुरूप बॉयलर प्लेट, ट्यूब, पाइप, काक्तस्टोंग, फोवजिंग
और वफवटोंग बनाते समय सोंबोंवधत मानको ोंके वीकीकायय तनाि, रासायवनक और याोंविक गुणो ोंका
वडजाइन तैयार करते समय अनुपालन वकया जाएगा।
(4) बॉयलर प्लेट, ट्यूब, पाइप, काक्तस्टोंग, फोवजिंग और वफवटोंग में उपयोग की जाने िाली सामग्री के
विवभन्न ग्रेड और उनके वडजाइन धातु तापमान तावलका 2/1 के अनुसार होगों े।
(5) तावलका 2/1 में M नोंबर ग्रुवपोंग उन अल्फ़ान्यूमेररक डेवजग्नेशन को दशायती है जो िेक्तल् डोंग और
पोस् ट िेल् ड हीट टरीटमेंट (पीडबल् यूएचटी) हेतु सामवग्रयो ों के विवभय न ग्रेड के समूह तैयार करने
के उद्देश् य से मूल धातुओ ों को वदये गये हैं।40 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 2/1: मैटेररयल ग्रुवपंग
हृम सों. अवधकतम
फ़ोवजिंग अनुमत
सामाय य
M नोंबर/ ग्रुप प् लेटटस (‘t’ वममी में मोटाई) पाइप् स ट्यूब् स काक्तस् टोंग् स और तापमान(0C)
सोंघटक
वफवटोंग
(1) (2) (3) (4) (5) (6) (7) (8) (9)
1. C S A 515 Gr60 (t≤ 25) SA 179, BS 427
3059
2. C-Si SA 515 Gr60 (t=26- SA 106 Gr A , SA 210 Gr A1 SA 352 SA 266 427
50) SA 106 Gr B LCB Gr1
M1/Gr 1
SA 515 Gr60 (t=51-
(काबयन स् टील)
100)
SA515 Gr60 (t> 100)
3. C-Mn-Si SA 350 427
LF1
4. C SA 105 427
5. C-Si SA 515 Gr70 (t≤ 25) SA 216 SA 266 427
SA 515 Gr70 (t=26- WCB Gr2,
M1/Gr 2 50) SA 266
(काबयन स् टील) SA 515 Gr70 (t> 50) Gr3
6. C-Mn-Si SA 516 Gr60, Gr70 (t≤ SA 106 Gr C SA 210 Gr C SA 216 SA 350 427
12.5) WCC, LF2
SA 516 Gr60, Gr70 352 LCC[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 41
(t=12.6–50)
SA 516 Gr60, Gr70
(t=51-100)
SA 516 Gr60, Gr70
(t>100)
SA 299 GrA (t≤ 25),
SA 299 GrA (t>25)
7. C-0.5 Mo SA 335 Gr P1 SA 209 Gr T1 538
M3/Gr 1
8. 0.5 Cr-0.5 SA 335 Gr P2 SA 213 Gr T2 538
(L A S)
Mo
9. C-0.5 Mo SA 182 F1 538
M3/Gr 2
10. 0.5 Cr-0.5 SA 182 F2 538
Mo
11. 1.25Cr- SA 387 Gr11 Cl 2 SA 335 Gr P11 SA 213 Gr T11 SA 217 SA 182 649
0.5Mo-Si WC6 F11 Cl
1,2,3
SA 234
M4/Gr 1 WP11 Cl
(L A S) 1
SA 336
F11 Cl
1,2,3
12. 1Cr-0.5Mo SA 387 Gr12 Cl 2 SA 335 Gr P12 SA 213 Gr T12 SA 182 64942 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
F12 Cl 1,2
SA 234
WP12 Cl
1
SA 336
F12
13. 2.25Cr- SA 387 Gr22 Cl 2 SA 335 Gr P22 SA 213 Gr T22 SA 217 SA 182 649
1Mo WC9 F22 Cl 1,3
M5A/Gr 1
SA 234
(L A S)
WP22 Cl
1
14. 5Cr-0.5Mo SA 335 Gr P5 SA 213 Gr T5 SA 182 F5 649
SA 234
WP5 Cl1
M5B/Gr 1 SA 336 F5
15. (A S) 9Cr-1Mo SA 335 Gr P9 SA 213 Gr T9 SA 182 F9 649
SA 234
WP9 Cl1
SA 336 F9
16. 9Cr-1Mo-V SA 387 Gr91 Cl 2 SA 335 Gr P91 SA 213 Gr T91 SA 217 SA 182 649
C12A F91
M15E Gr 1
SA 234
(A S)
WP91
SA 336[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 43
F91
17. 18Cr-8Ni SA 240 304 SA 213 TP SA 351 SA 182 816
304, CF8 F304
SA 213 TP SA 182
304H F304H
18. 18Cr-8Ni SA 240 304L SA 213 TP SA 182 427
304L F304L
19. 16Cr-12Ni- SA 240 316 SA 213 TP 316 SA 351 SA 182 816
2Mo SA 213 TP CF8M F316
316H SA 182
M8/Gr 1
F316H
(S S)
20. 16Cr-12Ni- SA 240 316L SA 213 TP SA 182 454
2Mo 316L F316L
21. 18Cr-10Ni- SA 213 TP 321 SA 182 816
Ti SA 213 TP F321
321H SA 182
F321H
22. 18Cr-10Ni- SA 213 TP 347 SA 351 SA 182 816
Cb SA 213 TP CF8C F347H
347H
23. 25Cr-20Ni SA 213 TP 816
M8/Gr2 (SS) 310S44 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
24. MX12 12X1Mφ 649
25. MX20 X20CrMoV121 X20CrMoV121 649
26. M43 52Ni– SB 168 N06617 SB 167 SB 167 SB 564
22Cr– N06617 N06617 N06617-
13Co–9Mo फोवजिंग
SB 166
N06617 –
रोड़, बार
तथा िायर
नोट:-
1. स् टे बासय के वलए, SA 675 अथिा इसके समान सामग्री का भी उपयोग वकया जा सकता है।
2. ईआरडब्ल्यू ट्यूब के वलए, BS/EN 10217 अथिा इसके समान सामग्री का भी उपयोग वकया जा सकता है।
3. कोल् ड-डरॉन रेवससटेंस िेल् डेड ट्यूब् स के वलए, BS/EN 10305 अथिा इसके समान सामग्री का उपयोग वकया जा सकता है।
4. विकास के अधीन सामग्री का उपयोग तकनीकी सलाहकार (बॉयलर) के अनुमोदन से वकया जा सकता है।
5. उपयुय् त के अलािा, IS अथिा वकसी भी अोंतरायष् टरीय कोड BS, EN, ASME, DIN और JIS का अनुपालन करने िाली सामग्री का भी उपयोग वकया जा
सकता है।
6. IBR में विवनवदयष् ट और िास् तविक सामग्री विवशष् टताओ ों की अपेिाओ ों(रासायवनक, याोंविक और पररमापीय िहन िमता) के बीच कोई वभय नता आने के
मामले में बाद िाली अपेिाओ ोंका अनुपालन वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 45
भाग-II
31. काबषन, एलॉय, ट ेनलैस ट ील और वनवकल एलॉय प् लेट स के वनमाषण की सामग्री-
(1) प् लेटटस के वलए स् टील खुली भट्टी, इलैक्त् टरक फनेस अथिा बेवसक ऑ् सीजन प्रवहृया अथिा
वकसी ऐसी अय य प्रवहृया से तैयार वकया जाएगा जो स् टील को समकि विवनवदयष् ट विशे ताएों
प्रदान करें।
(2) उपयोग वकये जाने िाले स् टील की वकस् म के वलए सामायय डीऑ् सीडेशन प्रवहृया उपयु् त
होगी, विशे रूप से ऐसे मामले में जहाों डीऑ् सीडेशन प्रवहृया स् टील के िवधयत तामपान
विशे ताओ ोंके स् तर को प्रभावित करती है।
(3) काबयन (C) और काबयन मैंगनीज (C-Mn) स् टील की प् लेटटस के वलए सेमी-वकल् ड स् टील का
उपयोग वकया जा सकता है वजसकी तय यता िमता की ऊपरी सीमा 56 वकग्रा/िगय वममी से
अवधक न हो और मोटाई 50 वममी से अवधक न हो।
(4) स् टील स् टरैंड कास् ट हो सकता है अथिा उसे स्टेशनरी मोल् ड में कास् ट वकया जा सकता है।
(5) यवद उसी साोंके वतक रासायवनक सोंघटक के हीटटस को एक बार में लगातार स् टरैंड कास् ट
वकया जाता है तो कास् ट उत् पाद (स् लैब) को वदया गया हीट नोंबर िही रहेगा जब तक वक लैब
में सभी स्टील अलग-अलग हीट से न हो।
(6) जब दो लगातार स् टरैंड कास् ट हीट की अलग-अलग साोंके वतक रासायवनक सोंघटक रेंज हो
तो विवनमायता वकसी ऐसी स् थावपत प्रवहृया द्वारा टराोंवजशन सामग्री को हटायेगा जो ग्रेडटस को
आिश् यक रूप से अलग कर सके ।
(7) स् टरैंड-कास् ट स् लैग से प् लेट की मोटाई में कमी का अनुपात कम से कम 3:1 होना चावहए
वसिाय इसके वक वनम् नवलक्तखत सभी शतों को पूरा करने पर इसे 2:1 तक कम करने की
अनुमवत दी जा सकती है:-
(क) प् लेट की विवनवदयष् ट मोटाई पचहत्तर वमवलमीटर (वममी) अथिा अवधक है।
(ख) वनम् नवलक्तखत लो हाइडरोजन प्रवहृयाओ ों में से एक या अवधक का उपयोग वकया जाता है
नामत:-
(i) स् टील मेवकों ग के दौरान िै् यूम डीगैवसोंग;
(ii) स् लैब् स अथिा स् लैब् स की वनयोंवित सोवकों ग;
(iii) स् लैब् स अथिा प्ल ेटटस की वनयोंवित स् लो कू वलोंग।
(ग) ताप विश् ले ण के आधार पर, सल् फर अोंश 0.004 % अथिा कम।
(घ) वनम् नवलक्तखत प्रवहृयाओ ों में से एक या अवधक का उपयोग वकया जाता है, नामत:- (i)
स् टरैंड काक्तस् टोंग के दौरान इलै् टरोमैग् नेवटक स् टाइररोंग;
(ii) स् टरैंड काक्तस् टोंग के दौरान सॉफ्ट ररड् शन;
(iii) प् लेट रोवलोंग के दौरान हैिी पास ररड् शन अथिा अय य विशे प्रवहृयाएों;
(iv) प् लेट रोवलोंग के दौरान कों बाइोंड फ़ोवजिंग और रोवलोंग।
(ङ) 100 प्रवतशत प् लेट सफे स की लगातार स् कै वनोंग के आधार पर प्लेटो ों की अल् टरासोवनक
रूप से जाोंच की जाती है।
(च) इन प् लेटो ोंकी गहन रूप से मोटाई सोंबोंधी तनाि का परीिण वकया गया है।46 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(छ) खरीद ऑडयर में अय यथा विवनवदयष् ट न होने, पर प् लेटटस का उत् पादन प् लेटें-एज-रोल् ड से
वकया जाएगा।
(8) फ्यूजन िेल् डेड बॉयलर डरम, िेसल् स, सेपरेटसय, हैडसय और अय य प्रैशर पाटटयस की प् लेट इस
अध्याय की तावलका 2/2 में वदये गये रासायवनक सोंघटन का पालन करेंगी।
(9) स् टील में 0.05 प्रवतशत से अवधक सल् फर अथिा फॉस् फोरस नही ोंहोना चावहए।
(10) जब सामग्री की आिश् यकता फ्लेम कवटोंग अथिा िेक्तल् डोंग या दोनो ोंके वलए होती है तो काबयन
अोंश 0.30% से अवधक नही ोंहोना चावहए और 0.26% से अवधक काबयन अोंश होने पर विशे
सािधानी बरती जानी चावहए।
(11) जब स् टील का सवियस टेंपरेचर 371 वडग्री सेक्तियस से अवधक होने की सोंभािना हो तो
वसवलकॉन अोंश 0.10% से कम नही ों होना चावहए अथिा िैकक्तल् पक रूप से सामग्री को
बॉयलर गुणित् ता के काबयन स् टील प् लेटटस की हृीप गुणित् ता हेतु साक्ष् य परीिण पास करना
होगा।
(12) (क) काबयन स्टील के मामले में, -
(i) बारह वमलीमीटर (वममी) और उससे कम मोटाई िाली प् लेटटस, जो हॉट फॉवमिंग के
आशय से नही ोंबनाई गई है, उनकी आपूवतय अननॉमयलाइज् ड अथिा रोल्ड कों डीशन में की जा
सकती है बशते वक विवनमायण के कोड में इसका प्रािधान हो।
(ii) बारह वमलीमीटर (वममी) से अवधक मोटाई िाली प् लेटटस, जो हॉट फॉवमिंग के आशय से
नही ोंबनाई गई है, उनकी आपूवतय नॉमयलाइज् ड क्तस् थवत में की जाएगी:
(iii) यवद नॉमयलाइवजोंग फै विके टर द्वारा की जानी है तो प् लेटटस को हॉट फॉवमिंग के वलए
समान रूप से या तो नॉमयलाइज अथिा हीट वकया जा सकता है। तथावप हॉट फॉवमिंग के वलए
हीट की गई प् लेटटस का तापमान नॉमयलाइवजोंग तापमान से बहुत अवधक न हो।
बशते वक नॉमयलाइवजोंग से छू ट दी जा सकती है यवद विवनमायता द्वारा यह प्रस् तुत वकया
जाता है वक समकि विशे ताएों कू वलोंग के पश् चात रोवलोंग द्वारा भी प्राप्त की जा सकती हैं।
(iv) बॉयलर विवनमायता यवद चाहे तो जाोंच विश् ले ण का आदेश दे सकता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 47
तावलका 2/2: रासायवनक संघटक (%)
हृम काबषन मैंगनी फास्पोर सल्फ वसवल हृोवमयम वनवकल मोवलब्डे िैनेवडय नाइटरो अन्य
सं. सामग्री का ग्रेड (C) ज(Mn स (P) र (S) कोन (Cr) (Ni) नम म (V) जन
) (Si) (Mo) (N)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
1. SA 299 GrA (t≤25) 0.26 0.9- 0.035 0.03 0.15- - - - - - -
1.4 5 0.4
2. SA 299 GrA (t>25) 0.28 0.9- 0.035 0.03 0.15- - - - - - -
1.5 5 0.4
3. SA 515 Gr60 (t≤25) 0.24 0.9 0.025 0.02 0.15- - - - - - -
5 0.4
4. SA 515 Gr60 (t=26-50) 0.27 0.9 0.025 0.02 0.15- - - - - - -
5 0.4
5. SA 515 Gr60 (t=51-100) 0.29 0.9 0.025 0.02 0.15- - - - - - -
5 0.4
6. SA 515 Gr60 (t>100) 0.31 0.9 0.025 0.02 0.15- - - - - - -
5 0.4
7. SA 515 Gr70 (t≤25) 0.31 1.2 0.025 0.02 0.15- - - - - - -
5 0.4
8. SA 515 Gr70 (t=26-50) 0.33 1.2 0.025 0.02 0.15- - - - - - -
5 0.4
9. SA 515 Gr70 (t>50) 0.35 1.2 0.025 0.02 0.15- - - - - - -
5 0.4
10. SA 516 Gr60 (t≤12.5) 0.21 0.6- 0.025 0.02 0.15- - - - - - -
0.9 5 0.4
11. SA 516 Gr60 (t=12.6-50) 0.23 0.85- 0.025 0.02 0.15- - - - - - -
1.2 5 0.4
12. SA 516 Gr60 (t=51-100) 0.25 0.85- 0.025 0.02 0.15- - - - - - -
1.2 5 0.448 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
13. SA 516 Gr60 (t>100) 0.27 0.85- 0.025 0.02 0.15- - - - - - -
1.2 5 0.4
14. SA 516 Gr70 (t≤12.5) 0.27 0.85- 0.025 0.02 0.15- - - - - - -
1.2 5 0.4
15. SA 516 Gr70 (t=12.6-50) 0.28 0.85- 0.025 0.02 0.15- - - - - - -
1.2 5 0.4
16. SA 516 Gr70 (t=51-100) 0.3 0.85- 0.025 0.02 0.15- - - - - - -
1.2 5 0.4
17. SA 516 Gr70 (t>100) 0.31 0.85- 0.025 0.02 0.15- - - - - - -
1.2 5 0.4
18. SA 387 Gr11 Cl 2 0.05- 0.4- 0.025 0.02 0.5- 1.0-1.5 - 0.45- - - -
0.17 0.65 5 0.8 0.65
19. SA 387 Gr12 Cl 2 0.05- 0.4- 0.025 0.02 0.15- 0.8-1.15 - 0.45- - - -
0.17 0.65 5 0.4 0.65
20. SA 387 Gr22 Cl 2 0.05- 0.3- 0.025 0.02 0.5 2.0-2.5 - 0.9- - - -
0.15 0.6 5 1.10
21. SA 387 Gr91 Cl 2 0.08- 0.3- 0.02 0.01 0.2- 8.0-9.5 0.4 0.85- 0.18- 0.03- Nb: 0.06-0.1;
0.12 0.6 0.5 1.05 0.25 0.07 Al: 0.02;
Ti: 0.01; Zr:
0.01
22. SA 240 304 0.07 2 0.045 0.03 0.75 17.5- 8.0- - - 0.1 -
19.5 10.5
23. SA 240 304L 0.03 2 0.045 0.03 0.75 17.5- 8.0-12 - - 0.1 -
19.5
24. SA 240 316 0.08 2 0.045 0.03 0.75 16.0- 10.0- 2.0-3.0 - 0.1 -
18.0 14.0
25. SA 240 316L 0.03 2 0.045 0.03 0.75 16.0- 10.0- 2.0-3.0 - 0.1 -
18.0 14.0[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 49
26. SB 168 N06617 0.05- 1.0 - 0.01 1.0 20.0- 44.5 8.0- - - Co:10.0-15.0;
0.15 5 24.0 min 10.0 Fe:3.0; Al: 0.8-
1.5; Cu:0.5;
Ti:0.6; B:0.006
(नोट: अवधकतम जब एकल मान विवनवदषष्ट हो)50 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) एलॉय स् टील के मामले में, :-
(i) ग्रेड 91 प्लेटो ों को छोड़कर, सभी प् लेटो ों को या तो एनीवलोंग, नॉमयलाइवजोंग और टेंपररोंग द्वारा
ताप प्रवहृया से गुजारा जाएगा अथिा यवद खरीदार से अनुमवत प्राप्त हो तो टेंपररोंग के
पश् चात एअर ब् लाक्तस् टोंग अथिा वलक्त् िड ् िैक्तय चोंग द्वारा एक वनक्तश् चत तापमान पर गमय करने
के पश् चात तेजी से ठोंडा वकया जाएगा।
(ii) ग्रेड 91 पट लेटो ों को या तो नॉमयलाइवजोंग और टेंपररोंग द्वारा ताप प्रवहृया से गुजारा
जाएगा अथिा टेंपररोंग के पश् चात एअर ब् लाक्तस् टोंग अथिा वलक्त् िड ् िैक्तय चोंग द्वारा एक वनक्तश् चत
तापमान पर गमय करने के पश् चात तेजी से ठोंडा वकया जाएगा।
(iii) ग्रेड 91 प् लेटो ों को 1040°C से 1080°C के वनक्तश् चत तापमान पर गमय वकया जाएगा
और 730°C से 800°C पर टेंपर वकया जाएगा।
(ग) स् टेनलैस स् टील के मामले में, :─ लागू सामग्री ग्रेड की याोंविक गुणो ों की आिश्यकताओ ों को
पूरा करने के वलए सामग्री को साल् यूशन एनील् ड वकया जाएगा।
(घ) वनवकल एलॉय के मामले में:- ग्रेड N06617 को 1150°C से 1230°C पर विवलयन एनील् ड
वकया जाएगा और वजसे पानी में ठोंडा वकया जाएगा अथिा अय य साधनो ों से तेजी से ठोंडा वकया
जाएगा।
32. कवमयो ं आवद से मुल्पत - (1) प् लेटटस की छोटी सतही कवमयो ों को याोंविक साधनो ों द्वारा हटाया जा
सकता है तावक वचकनी सतह प्राप्त की जा सके बशते वक य यूनतम वनधायररत मोटाई बनाये रखी जा सके ।
(2) वनरीिण प्रावधकारी के अनुमोदन द्वारा ही सतही कवमयो ों की िेक्तल् डोंग द्वारा मरम् मत की जा
सकती है, बशते वक जहाों आिश् यक हो िेक्तल् डोंग के पश् चात प् लेट के तनाि को दूर वकया जाये।
33. काबषन ट ील के वलए रोवलंग मावजषन - वकसी भी प्ल ेट अथिा रोल से्श न की मोटाई वकसी भी वहस्स े
में विवनवदयष् ट मोटाई से कम नही ोंहोगी, यह पररकवलत वकए भार से 5 प्रवतशत से अवधक नही ोंहोगी वसिाय
पतली प् लेटो ोंऔर चौड़ी प् लेटो ोंके मामले में वजनकी भार िहन िमता तावलका 2/3 में वदये अनुसार होगी :-
तावलका 2/3: बॉयलर प्ल ेट स के वलए रोवलंग भार िहन िमता की प्रवतशतता की अनुसूची
वमलीमीटर (वममी) में मोटाई
हृम वममी में मोटाई 1219 1219 से 1524 1828 2134 2438 2743 3048 3352
सों. से कम 1524 से से से से से से और
तक 1828 2134 2438 2743 3048 3352 उससे
तक तक तक तक तक तक अवध
क
% % % % % % % % %
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
1. 6 से 8 तक 5 5 5 7 9 12 - - -
2. 8 से 10 तक 5 5 5 6 7.5 10 11 12 -
3. 10 से 11 तक 5 5 5 6 6 8 9 11 15
4. 11 से 13 तक 5 5 5 5 6 7.5 8 9 12[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 51
5. 13 से 16 तक 5 5 5 5 6 6 7.5 9 10
6. 16 से 19 तक 5 5 5 5 5 5 7 8 9
7. 19 से 25 तक 5 5 5 5 5 5 6 7 8
8. 25 से 51 तक 5 5 5 5 5 5 5 9 7
उपयुषत सभी मावजष्स की गणना वनिल सै्ांवतक भार से की जाएगी
34. परीिण और वनरीिण - परीिण और वनरीिण, भेजे जाने से पहले विवनमायण स्थल पर वकये जाएोंगे;
लेवकन यवद बॉयलर में कायय करते हुए कोई सामग्री असोंतो जनक सावबत होती है तो उस सामग्री को
परीिण के सोंतो जनक पाये जाने सोंबोंधी वकसी वपछले प्रमाणपि के बािजूद अस् िीकार कर वदया जाएगा
और उसी चाजय की सामग्री के ऐसे और परीिण वकये जाएोंगे जैसा वक सिम व् यक्त् त को िाोंवछत हो।
35. परीिण टुकडो ं का चयन - सामग्री के सभी परीिण टुकड़ो ों का चयन सिम व्यक्ति द्वारा वकया
जाएगा और उनकी उपक्तस्थवत में परीिण वकया जाएगा, और िह इस बात से सोंतुष् ट होना चावहए वक यहाों
वनधायररत शतों को पूरा वकया गया है।
36. त् यता परीिण टुकडे- (1) तय यता परीिण टुकड़े सोंगत सामग्री विवशष् टताओ ोंके अनुरूप होगों े।
(2) 60 वमलीमीटर (वममी) से अवधक मोटाई की प् लेट के वलए, परीिण टुकड़े प् लेट हृॉस से् शन के
ए् सटीररयर थडय से वलये जाएोंगे और जहाों व्यािहाररक है, रोल्ड सफे स को परीिण वहस् से के दोनो ों
विपरीत वसरो ोंपर ररटेन रखा जाएगा।
37. त् यता परीिण: (1) परीिण नमूने वनम् नवलक्तखत अपेिाओ ोंके अनुरूप होगों े, अथायतट:
तावलका 2/4
हृम ग्रेड यांवत्रक विशेर्ताएं (् यूनतम, जहां एकल मान विवनवदषष्ट
सं. हो)
TS YS जी एल पर
MPa (वकग्रा/वममी2) MPa प्रवतशत
(वकग्रा/वममी2) एलांगेशन
= 50
वममी
् यूनतम
(1) (2) (3) (4) (5)
1. SA 299 GrA (t≤25) 515-655 (52.5-66.8) 290 (29.6) 19
2. SA 299 GrA (t>25) 515-655 (52.5-66.8) 275 (28) 19
3. SA 515 Gr60 (t≤25) 415-550 (42.3-56.1) 220 (22.4) 25
4. SA 515 Gr60 (t=26-50) 415-550 (42.3-56.1) 220 (22.4) 25
5. SA 515 Gr60 (t=51-100) 415-550 (42.3-56.1) 220 (22.4) 25
6. SA 515 Gr60 (t>100) 415-550 (42.3-56.1) 220 (22.4) 2552 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
7. SA 515 Gr70 (t≤25) 485-620 (49.5-63.2) 260 (26.5) 21
8. SA 515 Gr70 (t=26-50) 485-620 (49.5-63.2) 260 (26.5) 21
9. SA 515 Gr70 (t>50) 485-620 (49.5-63.2) 260 (26.5) 21
10. SA 516 Gr60 (t≤12.5) 415-550 (42.3-56.1) 220 (22.4) 25
11. SA 516 Gr60 (t=12.6-50) 415-550 (42.3-56.1) 220 (22.4) 25
12. SA 516 Gr60 (t=51-100) 415-550 (42.3-56.1) 220 (22.4) 25
13. SA 516 Gr60 (t>100) 415-550 (42.3-56.1) 220 (22.4) 25
14. SA 516 Gr70 (t≤12.5) 485-620 (49.5-63.2) 260 (26.5) 21
15. SA 516 Gr70 (t=12.6-50) 485-620 (49.5-63.2) 260 (26.5) 21
16. SA 516 Gr70 (t=51-100) 485-620 (49.5-63.2) 260 (26.5) 21
17. SA 516 Gr70 (t>100) 485-620 (49.5-63.2) 260 (26.5) 21
18. SA 387 Gr11 Cl 2 515-690 (52.5-70.3) 310 (31.6) 22
19. SA 387 Gr12 Cl 2 450-585 (45.9-59.6) 275 (28) 22
20. SA 387 Gr22 Cl 2 515-690 (52.5-70.3) 310 (31.6) 18
21. SA 387 Gr91 Cl 2 585-760 (59.6-77.5) 415 (42.3) 18
22. SA 240 304 515 (52.5) 205 (21) 40
23. SA 240 304L 485 (49.5) 170 (17.3) 40
24. SA 240 316 515 (52.5) 205 (21) 40
25. SA 240 316L 485 (49.5) 170 (17.3) 40
26. SB 168 N06617 655 (66.8) 240 (24.5) 35
(2) काबयन स्टील के मामले में, ─ (i) सामाय य तापमान पर अपर यील् ड प् िाइोंट सामाय य तापमान पर
विवनवदयष् ट य यूनतम तय यता िमता के 50% से कम नही ोंहोनी चावहए।
(ii) अवधकतम अनुमत तनाि, सामग्री के देश में लागू बॉयलर कोड में वकए गए प्रािधान के अनुरूप
होगा, वजससे िह सोंबोंवधत है और मान की अनुपलब् धता के मामले में अवधकतम अनुमत तनाि, के
मूल् याोंकन के उद्देश् य से, िवधयत तापमान (E) पर 0.2% की साक्ष् य सीमा पर तनाि के य यूनतम मूल् य
t
की गणना, सामाय य तापमान (R ) पर य यूनतम विवनवदयष् ट तय यता िमता को नीचे दी गई तावलका
20
2/5 में वदये गये अनुपात (Et/R ) के मूल् य से गुणा करके की जा सकती है:
20
तावलका 2/5
काबषन ट ील बॉयलर प्ल ेट स का सामा्य तापमान (R ) पर ् यूनतम विवनवदषष्ट त् यता िमता पर
20
िवधषत तापमान (E ) के साक्ष्य सीमा 0.2% पर तनाि के अनुपात हेतु ् यूनतम मान
t
तापमान °C *250 *275 300 325 350 375 400 425
E/R 0.40 0.38 0.36 0.34 0.33 0.32 0.31 0.30
t 20[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 53
*300 वडग्री सेक्तियस से कम तापमान के मामले में, स् िीकाययता के वलए अपेवित कोई परीिण, इन
तापमानो ों पर वपछले परीिण के ररकॉडय के अभाि में, 300 वडग्री सेक्तियस माना जाएगा, ऐसे मामले में
साक्ष् य तनाि सामाय य तापमान पर विवनवदयष् ट य यूनतम तय यता िमता से पररकलन द्वारा प्राप्त मान से कम
होना चावहए और 300 वडग्री सेक्तियस के वलए उपयुय् त साक्ष् य अनुपात 0.36 होना चावहए।
38. त् यता परीिणो ं की सं् या: शेल प्लेटटस, बट स्टरैप्स और प्लेटटस, गसेट प्लेटटस, एोंड प्लेटटस, फनेस
प्लेटटस और फ्लैंवजोंग प्लेटटस के परीिण के उद्देश्य से, प्रत्येक प्लेट से एक तन्यता परीिण टुकड़ा काटा
जाएगा।
39. कोल् ड बेंड स के मामले में बेंड परीिण:- (1) परीिण टुकड़ो ों को प् लेटटस अथिा बार की लोंबाई में
अथिा चौड़ाई में काटा जाएगा और यह 38 वमलीमीटर (वममी) से कम चौड़ा नही ोंहोना चावहए लेवकन छोटे
बार के वलए पूरे खोंड का उपयोग वकया जा सकता है।
(2) (क) सभी कोल् ड बेंड परीिणो ों में, 13 वमलीमीटर (वममी) और उससे अवधक की मोटाई िाले नमूने,
काटने के कारण वजनके कोने अथिा वकनारे खुरदुरे हो गये हैं उय हें वफवलोंग अथिा ग्राइोंवडोंग द्वारा
हटाया जाएगा और 25 वमलीमीटर (वममी) और उससे अवधक मोटाई िाले नमूनो ों के वकनारो ों को
मशीन से वकया जा सकता है लेवकन परीिण वहस् सो ोंपर और कोई अय य प्रवहृया नही ोंकी जाएगी।
(ख) परीिण वहस्स ो ों को तब तक एनील्ड नही ोंवकया जाएगा जब तक वक सामग्री वजससे वक उयह ें
काटा गया है, को भी इसी प्रकार एनील्ड न वकया गया हो और ऐसे मामले में परीिण वहस् से को
परीिण से पूिय उसी प्रवहृया से गुजारा जाएगा।
(3) स् टील के सभी ग्रेड की प् लेटो ोंके बेंड परीिण के वलए, परीिण वहस् से को मेनडरेल, वजसकी विज् या प् लेट
की मोटाई से वनम् नानुसार सोंबोंवधत होगा, के चारो ों ओर 180 वडग्री कोल् ड बेंड करने पर वबना वकसी
दरार के खरा उतरना चावहए:
हृम सों. तय यता िमता मेनडरेल विज् या
(1) (2) (3)
1. 36 - 49 वकग्रा/वममी2 1 T*
2. 41 - 57 वकग्रा/वममी2 1 T
3. 45 - 64 वकग्रा/वममी2 1.5 T
*जहाों, T = प् लेट की मोटाई
(4) छोटे खोंडो ोंमें सामग्री के वलए ये बेंड परीिण चपटे बार से वकये जा सकते हैं।
(5) बेंड परीिण प्रेशर अथिा ब् लो द्वारा वकया जा सकता है।54 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
40. बेंड परीिणो ंकी सं्य ा- बेंड परीिण रोल वकए गए प्रत् येक प् लेट का वकया जाएगा। शैल प् लेटटस, बट
स्ट रैप् स और अय य प् लेटटस वजय हें आग से फ्लैंग अथिा िकय नही ोंवकया जाना है अथिा वजय हें प्रयोग के दौरान
आग के सोंपकय में नही ोंआना है, ऐसे बेंड का कोल् ड बेंड परीिण वकया जाएगा।
41. अि ीकार करने से पूिष अवतरर त परीिण- (1) (क) यवद सिम व् यक्त् त द्वारा पहले चुने गए परीिण
वहस् से इन विवनयमो ोंके तहत परीिण अपेिाओ ों को पूरा नही ोंकर पाते हैं तो, उसी प्रकार के 2 अय य परीिण
वकये जायेंगे लेवकन इनमें से वकसी के भी असफल रहने पर, उन प् लेटटस अथिा बासय को अस् िीकार कर
वदया जाएगा वजनसे परीिण वहस् सो ोंको काटा गया था।
(ख) ऐसे सभी मामलो ों में उसी चाजय की वकसी सामग्री को स् िीकार वकये जाने से पूिय और परीिण वकये
जायेंगे।
(2) यवद वकसी परीिण के पररणाम, परीिण पद्वत की तकनीकी क्तस् थवतयाों अथिा वकसी परीिण वहस् से की
सीवमत कमी के कारण असोंतो जनक पाये जाते हैं, तो इस असफलता पर अपेिा को पूरा करने और दूसरे
परीिण वहस् से से प्रवतस् थावपत करने के वनणयय पर विचार वकया जा सकता है।
(3) अगर परीिण का पररणाम ठीक न होने की िजह खराब ताप प्रवहृया है, तो प्लेट और टेस्ट क्तस्टरप की
पुन: ताप प्रवहृया की जा सकती है और उसके बाद, पूरे परीिण को दोहराया जाएगा।
42. ब्ांवडंग- (1) प्रत्य ेक प् लेट, खोंड और बार को पहचान वच् की सोंख् या से दो स् थानो ोंपर माकय र द्वारा स् पष् ट
और विवशष् ट रूप से माकय वकया जाएगा वजसके द्वारा उस चाजय का पता लगाया जा सकता है वजससे सामग्री
का वनमायण हुआ था।
(2) प्रत्य ेक प् लेट पर IS: 2002 में वदये अनुसार स् टील माकय र द्वारा स् टैम् प भी लगाई जाएगी; वजसमें
वनम् नवलक्तखत सूचना आिश् यक रूप से प्रदान की जाएगी:-
(क) विवनमायता का नाम;
(ख) विवशष् टता;
(ग) हीट नोंबर;
(घ) प् लेट नोंबर, और
(ङ) स् टैंप।
43. अि ीकार की गई सामग्री को विरूवपत करना- यवद सामग्री वकसी मामले में वनधायररत परीिण पर
खरा उतरने में असफल रहती है तो सिम व् यक्त् त का पहचान वच् वजसे सामग्री पर स् टैंप वकया गया है, को
पहचान वच् के बाहर तक हृॉस के रूप में पोंच माकय द्वारा विरूवपत वकया जाएगा इस प्रकार यह दशायया
जाएगा वक यह सामग्री असफल रही।
44. वनरीिण हेतु सुविधाएं - वनमायता इनगॉटटस, वबलेटटस, स् लैब् स, प् लेटटस, बासय आवद को बनाने की ऐसी
प्रणाली को अपनाएगा जो इसे इन सभी तैयार सामवग्रयो ोंके मूल चाजय का पता लगाने में सिम बनायेगी और
वनरीिक अथिा सिम व् यक्त् त, जैसा भी मामला हो, को वनमायता द्वारा उनके सोंबोंवधत चाजय में सभी प् लेटटस
और बासय का पता लगाने और अपेवित परीिणो ों का सािी रहने के वलए सभी सुविधाएों प्रदान की जाएगी।
जब वनरीिण या सिम व्यक्ति जैसा भी मामला हो, सामग्री और परीिण के पररणामो ों से सोंतुष् ट होगा तो[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 55
वनरीिक या सिम व् यक्ति, जैसा भी मामला हो, को सामग्री की परीिण ररपोटय की दो प्रवतयाों उसके हस् तािर
हेतु प्रदान की जाएोंगी।
45. जब ट ील का उ पादन िहां नही ंवकया गया हो जहां उसे रोल वकया जा रहा है- (1) जहाों स् टील
का उत् पादन उस कारखाने में नही ों वकया जाता जहाों इसे रोल वकया जाता है, तो प्रपि V(भाग-क) अथिा
प्रपि IV(भाग-ग), जैसा भी मामला हो, में सामग्री के परीिण के साक्ष् य हेतु वनयु् त सिम व् यक्त् त को एक
प्रमाण पि प्रस् तुत वकया जाएगा वजसमें खुली भट्टी अथिा इलैक्त् टरक प्रवहृया अथिा कोई ऑ् सीजन प्रवहृया
वजससे उसका वनमायण वकया गया था, उसे आपूवतय करने िाले स् टील वनमायता का नाम, साथ ही स् टील वनमायता
की बु् स के सोंदभय हेतु चाजेस की सोंख् या का उल् लेख होगा।
(2) चाजय की सोंख् या को पहचान के उद्देश् य से प्रत्य ेक प् लेट अथिा बार पर अोंवकत वकया जाएगा।
46. वनमाषता का प्रमाणपत्र
वमल शीटटस पर हस् तािर करने से पूिय, वनमायता प्रपि V(भाग-क) अथिा प्रपि IV(भाग-ग), जैसा भी
मामला हो, में ऐसा प्रमाण-पि सिम व् यक्त् त को प्रस् तुत करेगा, जो इस बात की गारोंटी प्रदान करता है वक
इस सामग्री को खुली भट्टी अथिा इलैक्त् टरक प्रवहृया, अम् लीय अथिा िारीय द्वारा तैयार वकया गया है और
इसने सिम व् यक्त् त की उपक्तस् थवत में ऊपर उक्तल् लक्तखत परीिण को सोंतो जनक रूप से पूरा वकया है।
भाग-III
47. बॉयलर, सुपर हीटर, रीहीटर और हीट एस चेंजर के वलए काबषन, एलॉय, ट ेनलेस ट ील और
वनवकल एलॉय के सीमलेस ट्यूब् स- (1) ये विवनयम काबयन, एलॉय, स् टेनलेस स् टील और वनवकल एलॉय ग्रेड
के हॉट वफवनश् ड और कोल् ड डरॉन सीमलेस बॉयलर, सुपर हीटर, रीहीटर और हीट ए् सचेंजर ट्यूब् स पर
लागू होगों े। ये विवनयम-30 में विवनवदयष् ट अपेिाओ ों के अवतरर् त भाग-III में विवनवदयष् ट सभी अपेिाओ ों को
पूरा करेंगे।
(2) वडजाइन धातु तापमानो ोंके वलए विवनयम-30 की तावलका 2/1 देखें।
(3) (क) ये ट्यूब् स सीमलेस होगों े और इनका विवनमायण खुली भट्टी अथिा इलैक्त् टरक प्रवहृया अथिा वकसी
भी ऑ् सीजन प्रवहृया द्वारा तैयार स् टील से वकया जायेगा।
(ख) यह स् टील रासायवनक सोंघटक की वनम् नवलक्तखत सीमाओ ोंके अनुरूप होगा:-
तावलका 2/6: रासायवनक संघटक (%)
हृ ग्रेड रासायवनक सोंघटक %
म काबयन मैंगनीज हृोवमयम मोवलब्डेनम िैनेवडयम वनवकल अय य
वसवलकोन सल्फर फास्फोरस
सों. (C) (Mn) (Cr) (Mo) (V) (Ni) तत्ि
(S)
(P)
(Si)
(1) (2) (3) (4) (8) (9) (10) (11) (12)
(5) (6) (7)
1. SA17 0.06 0.27.- 0.25 0.035 0.035
9 - 0.63 अवध. अवध. अवध.
0.1856 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
2. SA 0.27 0.93 0.10 0.035 0.035
210 अवध. अवध. य यून. अवध. अवध.
ग्रेड *
A1
3. SA 0.35 0.29- 0.10 0.035 0.035
210 अवध. 1.06 य यून. अवध. अवध.
ग्रेड C *
4. SA 0.10 0.30 0.10 0.025 0.025 ------- 0.44 --- --- ----
209 0.20 0.80 0.50 अवध. अवध. 0.65
ग्रेड T1
5. SA 0.10 0.30 0.10 0.025 0.025 0.50 0.44 ---- --- -----
213 0.20 0.61 0.30 अवध. अवध. 0.81 0.65
ग्रेड T2
6. SA 0.15 0.30 0.50 0.025 0.025 4.00 0.45 ---- ---- -----
213 अवध. 0.60 अवध. अवध. अवध. 6.00 0.65
ग्रेड T5
7. SA 0.15 0.30 0.25 0.025 0.025 8.00 0.90 ---- ---- -----
213 अवध. 0.60 1.00 अवध. अवध. 10.0 1.10
ग्रेड T9
8. SA 0.05 0.30 0.50 0.025 0.025 1.00 0.44 ---- ---- -----
213 0.15 0.60 1.00 अवध. अवध. 1.50 0.65
ग्रेड
T11
9. SA 0.05 0.30 0.50 0.025 0.025 0.80 0.44 ---- --- -----
213 0.15 0.61 अवध. अवध. अवध. 1.25 0.65
ग्रेड
T12
10. SA 0.05 0.30 0.50 0.025 0.025 1.90 0.87 ---- ---- -----
213 0.15 0.60 अवध. अवध. अवध. 2.60 1.13
ग्रेड
T22
11. SA 0.07 0.30 0.20 0.010 0.020 8.00 0.85 0.18 0.40 Cb
213 0.14 0.60 0.50 अवध. अवध. 9.50 1.05 0.25 अवध. 0.06 -
ग्रेड 0.10
T91 N
0.030-
0.070
Al 0.02[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 57
अवध.
Ti 0.01
अवध.
Zr
0.01
अवध.
12. SA 0.08 2.00 1.00 0.030 0.045 18.0 ---- --- 8.00 ----
213 अवध. अवध. अवध. अवध. अवध. 20.0 11.0
TP
304
13. SA 0.04 2.00 1.00 0.030 0.045 18.0 ----- --- 8.00 -----
213 0.10 अवध. अवध. अवध. अवध. 20.0 11.0
TP304
H
14. SA 0.03 2.00 1.00 0.030 0.045 18.0 ----- --- 8.00 -----
213 5 अवध. अवध. अवध. अवध. 20.0 12.0
TP अवध.
304L
15. SA 0.08 2.00 1.00 0.030 0.045 24.0 ---- --- 19.0 -----
213 अवध. अवध. अवध. अवध. अवध. 26.0 22.0
TP310
S
16. SA 0.08 2.00 1.00 0.030 0.045 16.0 2.00 --- 10.0 -----
213 अवध. अवध. अवध. अवध. अवध. 18.0 3.00 14.0
TP
316
17. SA 0.04 2.00 1.00 0.030 0.045 16.0 2.00 --- 11.0 -----
213 0 अवध. अवध. अवध. अवध. 18.0 3.00 14.0
TP316 0.10
H
18. SA 0.03 2.00 1.00 0.030 0.045 16.0 2.00 --- 10.0 -----
213 5 अवध. अवध. अवध. अवध. 18.0 3.00 15.0
TP अवध.
316L
19. SA 0.08 2.00 1.00 0.030 0.045 17.0 ---- --- 9.00 Ti =
213 अवध. अवध. अवध. अवध. अवध. 20.0 13.0 5xC
TP य यून.
321 0.6058 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अवध.
20. SA 0.04 2.00 1.00 0.030 0.045 17.0 ---- --- 9.00 Ti =
213 0.10 अवध. अवध. अवध. अवध. 20.0 13.0 4xC
TP321 य यून.
H 0.60
अवध.
21. SA 0.08 2.00 1.00 0.030 0.045 17.0 ---- --- 9.00 Cb =
213 अवध. अवध. अवध. अवध. अवध. 20.0 13.0 10xC
TP य यून.,
347 1.00
अवध.
22. SA 0.04 2.00 1.00 0.030 0.045 17.0 ---- --- 9.00 Cb =
213 0.10 अवध. अवध. अवध. अवध. 19.0 13.0 8xC
TP347 0 य यून.,
H 1.00
अवध.
23. SB167 0.05 1.0 1.0 0.015 - 20.024 8.0 - 44.5 Co:10.
N066 0.15 अवध. अवध. अवध. .0 10.0 य यून. 0-15.0;
17 Fe:3.0
अवध.;
Al:
0.8-
1.5;
Cu:0.5
अवध.;
Ti:0.6
अवध.;
B:0.00
6 अवध.
* ग्रेड SA 210 ग्रेड ए1 और SA 210 ग्रेड सी के वलए विवनवदयष् ट अवधकतम काबयन से नीचे प्रत्य ेक 0.01
प्रवतशत की कमी के वलए, अवधकतम वनधायररत सीमा से ऊपर मैग् नीज के 0.06 प्रवतशत िृक्तद् की
अनुमवत होगी वजसकी अवधकतम सीमा 1.35 प्रवतशत होगी।
(ग) कोल् ड ि् डय ग्रेड टीपी 321एच का ग्रेन आकार 7 नों. का अथिा मोटा होगा।
(4) (क) काबयन स् टील ग्रेड के तप्त रूप से तैयार ट्यूब के वलए ताप प्रवहृया की आिश् यकता नही ों है।
काबयन स् टील ग्रेड के सामाय य ताप पर तैयार ट्यूब् स को अोंवतम रूप से कोल् ड वफवनवशोंग के
पश् चात सब-हृीवटकल एनीवलोंग, फु ल एनील अथिा नॉमयलाइवजोंग ताप प्रवहृया प्रदान वकया
जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 59
(ख) काबयन स् टील ग्रेड, टी 91, 12X1M, X20CrMoV121 और N06617 ग्रेड को छोड़कर
तावलका 2/6 में वदये गये ग्रेड के सभी ट्यूब् स को ररहीट वकया जाएगा और इसे फु ल एनील् ड,
आइसोथमयल एनील् ड अथिा नॉमयलाइज् ड अथिा टैम् पडय क्तस् थवत में तैयार वकया जाएगा। यवद
नॉमयलाइज् ड अथिा टैम् पडय क्तस् थवत में तैयार वकया जाता है तो ग्रेड टी1 और टी11 के वलए
य यूनतम टेम् पररोंग तापमान 650 वडग्री सेक्तल् सयस होगा और ग्रेड टी5, टी9 और टी22 के वलए
य यूनतम टेम् पररोंग तापमान 675 वडग्री सेक्तल् सयस होगा।
(ग) ग्रेड टी1, टी2 और टी12 की ट्यूवबोंग चाहे ताप प्रवहृया से तैयार हो अथिा सामाय य तापमान पर
तैयार वकया गया हो, विवनमायता के विकल् प के आधार पर, उपयुय् त खोंड (ख) में विवनवदयष् ट ताप
प्रवहृया के स् थान पर अोंवतम रूप से 650 वडग्री सेक्तल् सयस से 730 वडग्री सेक्तल् सयस का ताप
प्रवहृया दी जाएगी।
(घ) ग्रेड टी91 को अोंवतम ताप प्रवहृया के रूप में य यूनतम 1040 वडग्री सेक्तल् सयस पर नॉमयलाइज
और 730 वडग्री सेक्तियस पर टेंपर वकया जाएगा।
(ङ) ग्रेड 12x1Mo को एक से तीन घोंटे की अिवध के वलए 950-980 वडग्री सेक्तल् सयस पर
नॉमयलाइज और 720-750 वडग्री सेक्तियस पर टेंपर वकया जाएगा।
(च) ग्रेड X20CrMoV121 को य यूनतम एक घोंटे की अिवध के वलए 1020-1070 वडग्री सेक्तल् सयस
पर नॉमयलाइज और 730-780 वडग्री सेक्तियस पर टेंपर वकया जाएगा।
(छ) सभी स् टेनलेस स् टील ट्यूब्स को ताप प्रवहृया क्तस् थवत में तैयार वकया जाएगा। एच ग्रेड के अलािा
ताप प्रवहृया के दौरान सामग्री को 1040 वडग्री सेक्तियस के य यूनतम तापमान तक गमय करना
और पानी में ठोंडा करना अथिा अय य साधनो ोंसे तेजी से ठोंडा करना शावमल है।
(ज) सभी एच ग्रेड को विलयन शोधन क्तस् थवत में तैयार वकया जाएगा। यवद काययिाही में कोल् ड िवकिं ग
प्रवहृया को शावमल वकया जाएगा तो ग्रेड TP321H और TP347H के वलए य यूनतम विलयन
शोधन तापमान 1100 वडग्री सेक्तियस होगा तथा ग्रेड TP304H और TP316H के वलए 1040
वडग्री सेक्तियस होगा। यवद पी ग्रेड हॉट रोल्ड है तो ग्रेड TP 321 H और TP 347 H के वलए
य यूनतम विलयन शोधन 1050 वडग्री सेक्तियस पर होगा और ग्रेड TP 304H और TP 316H के
वलए 1040 वडग्री सेक्तियस होगा।
(झ) ग्रेड N06617 1150 वडग्री सेक्तियस से 1230 वडग्री सेक्तियस तक विलयन एनील् ड होगा और
पानी से ठोंडा वकया जाएगा अथिा अय य साधनो ोंसे तेजी से ठोंडा वकया जाएगा।
(5) (क) ट्यूबो ोंको भली प्रकार से तैयार, साफ और हावनप्रद कवमयो ोंको दूर वकया जाएगा तथा िे उवचत
रूप से सीधे, वचकने, बेलनाकार और वनम् नवलक्तखत िहन िमता के अधीन होगों े-
(i) उनके छोर वचकने और खुरदुरेपन से मु् त होगों े।
(ii) िे काययकु शलता से तैयार वकये जाएोंगे।
(iii) सतह की कवमयो ों जैसे ट्यूब में पाये गये वकसी अोंतर अथिा अवनयवमतता को वघस कर दूर
वकया जाएगा, बशते वक उसकी वचकनी और घुमािदार सतह को बनाये रखा जाये और
उसकी दीिारो ोंकी मोटाई अनुमत सीमा से कम न हो।
(iv) वघसाई के दौरान बाहरी व् यास को उस सीमा तक कम वकया जा सकता है वजतनी वक
अनुमवत हो।60 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) बाहरी व् यास में अनुमत वभय नता वनम् नानुसार है:-
तावलका 2/7: 12X1M, X20CrMoV121 और N06617 को छोडकर काबषन ट ील, एलॉय और
ट ेनलेस ट ील
हृम सों. बाहरी व् यास (वममी) अनुमत बाह्य अनुमत भीतरी
अोंतर (वममी) अोंतर (वममी)
(1) (2) (3) (4)
1. ताप से तैयार सीमलेस ट्यूब् स
2. 101.6 और उससे कम 0.4 0.8
3. 101.6 से 190.5 तक 190.5 सवहत 0.4 1.2
4. 190.5 से 228.6 तक 228.6 सवहत 0.4 1.6
5. सामाय य तापमान पर तैयार सीमलेस ट्यूब् स
6. 25.4 से कम 0.1 0.1
7. 25.4 से 38.1 तक 38.1 सवहत 0.15 0.15
8. 38.1 से 50.8 तक 50.8 के वबना 0.2 0.2
9. 50.8 से 63.5 तक 63.5 के वबना 0.25 0.25
10. 63.5 से 76.2 तक 76.2 के वबना 0.3 0.3
11. 76.2 से 101.6 तक 101.6 सवहत 0.38 0.38
12. 101.6 से 190.5 तक 190.5 सवहत 0.38 0.64
13. 190.5 से 228.6 तक 228.6 सवहत 0.38 1.14
तावलका 2/8: 12X1M ग्रेड के वलए
हृम सों. बाहरी व् यास (वममी) अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4)
1 ताप से तैयार और सामाय य तापमान पर तैयार ट्यूब् स
2 30.0 से कम 0.30 0.30
3 30 से 50 0.40 0.40
4 50.0 से अवधक 0.80% 0.80%
तावलका 2/9: X20CrMoV121 ग्रेड के वलए
हृम सों. बाहरी व् यास (वममी) अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 61
1 ताप से तैयार सीमलेस ट्यूब् स
2 100 और उससे कम 0.75% (0.5 वममी य यून.) 0.75% (0.5 वममी य यून.)
3 सामाय य तापमान पर तैयार सीमलेस ट्यूब् स
4 120 और उससे कम 0.60% (0.25 वममी य यून.) 0.60% (0.25 वममी य यून.)
5 120 से अवधक 0.75% 0.75%
तावलका 2/10: N06617 ग्रेड के वलए
हृम सों. बाहरी व् यास (वममी) अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4)
1. सीमलेस सामायय तापमान पर तैयार ट्यूब् स
2. 10 से अवधक 16 से कम 0.13 0.13
3. 16 से 38 0.19 0.19
4. 38 से 76 तक 0.25 0.25
5. 76 से 114 तक 0.38 0.38
6. 114 से 152 तक 0.51 0.51
7. 152 से 168 तक 0.64 0.64
8. 168 से 219 तक 0.79 0.79
9. ताप से तैयार ट्यूब् स
10. 19 से 38 0.4 0.8
11. 38.1 से 102 0.8 0.8
12. 102 से 235 1.6 0.8
(ग) प्रवतशत में दीिार की मोटाई के सोंबोंध में अनुमत अोंतर वनम्नानुसार होगा:-
तावलका 2/11: 12X1M, X20CrMoV121 और N06617 को छोडकर काबषन टील, एलॉय और
टेनलेस टील
हृम सों. बाहरी व् यास दीिार की मोटाई में प्रवतशत अोंतर
(वममी) 2.4 वममी और 2.4वममी से 3.8 3.8 वममी से 4.6 वममी से
उससे कम वममी तक और 4.6 वममी तक अवधक
3.8 वममी सवहत और 4.6 वममी
सवहत
बाह्य भीतरी बाह्य भीतरी बाह्य भीतरी बाह्य भीतरी
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
1. ताप से तैयार सीमलेस ट्यूब् स
2. 101.6 और 40 0 35 0 33 0 28 0
उससे कम
3. 101.6 से NA NA 35 0 33 0 28 0
अवधक
4. सामाय य तापमान पर तैयार सीमलेस ट्यूब् स62 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
5. बाह्य भीतरी
6. 38.1 और उससे कम 20 0
7. 38.1 से अवधक 22 0
तावलका 2/12: 12X1M ग्रेड के वलए
हृम सों. बाहरी व् यास (वममी) प्रवतशत अनुमत अोंतर
बाह्य भीतरी
(1) (2) (3) (4)
1. ताप से तैयार सीमलेस ट्यूब् स
2. 108 और उससे कम 15 10
3. 108 से अवधक 20 5
4. सामाय य तापमान पर तैयार सीमलेस ट्यूब् स
5. सभी आकार के 10 10
तावलका 2/13: X20CrMoV121 ग्रेड के वलए
बाहरी व् यास (वममी) प्रवतशत अनुमत अोंतर
बाह्य भीतरी
(1) (2) (3)
100 और उससे कम 12.5 10
तावलका 2/14: N06617 ग्रेड के वलए
हृम सों. बाहरी व् यास (वममी) प्रवतशत अनुमत अोंतर
बाह्य भीतरी
(1) (2) (3) (4)
1. सामाय य तापमापन पर तैयार सीमलेस ट्यूब् स
2. 10 से 16 तक 15.0 15.0
3. 16 - 38 10.0 10.0
4. 38 से 76 तक 10.0 10.0
5. 76 से 114 तक 10.0 10.0
6. 114 से 152 तक 12.5 12.5[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 63
7. 152 से 168 तक 12.5 12.5
8. 168 से 219 तक 12.5 12.5
9. ताप से तैयार ट्यूब् स
10. 19 से 38 12.5 12.5
11. 38.1 से 102 तक 12.5 12.5
12. 102 से 235 तक 12.5 12.5
(घ) लोंबाई में अनुमत अोंतर वनम्नानुसार होगा:-
तावलका 2/15: 12X1M, X20CrMoV121 और N06617 को छोडकर काबषन टील, एलॉय और
टेनलेस टील
हृम सों. विवनमायण की पद्वत बाहरी व् यास (वममी) लोंबाई (वममी)
बाह्य भीतरी
(1) (2) (3) (4) (5)
1. ताप से तैयार सीमलेस सभी आकार के 5 0
2. सामाय य तापमान पर 50.8 से कम 3 0
तैयार सीमलेस
50.8 और उससे 5 0
अवधक
नोट: लोंबाई में ये अनुमत अोंतर 7.3 मीटर सवहत 7.3 मीटर तक लोंबाई पर लागू हैं । 7.3 मीटर से अवधक
लोंबाई के वलए प्रत्य ेक 3 मीटर अथिा उसके वहस् से हेतु 3 वममी की अवतरर् त िहन िमता की अनुमवत होगी
जो अवधकतम 12 वममी तक अनुमत होगा। विवनवदयष् ट के अवतरर् त सकारात् मक स् तर पर लोंबाई की िहन
िमता वजसके सोंबोंध में परस् पर सहमवत हो।
तावलका 2/16: 12X1M ग्रेड के वलए
हृम सों. बाहरी व् यास (वममी) ट्यूब् स की लोंबाई (मी) अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4) (5)
1. 108 से कम 9 से कम 15 0
2. 9 से 12 35 0
3. 108 से अवधक सभी लोंबाइयाों 50 064 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 2/17: X20CrMoV121 ग्रेड के वलए
हृम सों. ट्यूब् स की लोंबाई (मी) अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4)
1. 6 और इससे कम 10 0
2. 6 से 12 तक, 12 सवहत 15 0
तावलका 2/18: N06617 ग्रेड के वलए
हृम सों. ट्यूब का बाहरी व् यास (वममी) लोंबाई में अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4)
1. 50.8 से कम 3.2 0
2. 50.8 और इससे अवधक 4.8 0
48. परीिण के वलए ट्यूब्स का चयन- (1) (क) (i) चपटा करने और फै लाने, फ्लेररोंग के वलए यहाों िवणयत
अपेवित परीिण नमूने स् िेवगोंग, फै लाने अथिा वकसी अय य प्रकार के प्रचालन के वनधायरण अथिा लोंबाई में
काटे जाने पूिय तैयार ट्यूब के वसरे से वलये जाएोंगे।
(ii) िे वसरे पर वचकने होने चावहए और खुरदुरेपन अथिा कवमयो ोंसे मु् त होने चावहए।
(ख) (i) यवद िाोंवछत और व् यिहायय हो तो परीिण मशीन की िमता तक ट्यूब के पूरे खोंड पर तय यता िमता
परीिण वकया जाए।
(ii) बड़े आकार के ट्यूबो ों के वलए, तय यता िमता परीिण के नमूने में ट्यूब से लोंबाई में काटी गई स् टरीप
शावमल होगी और वजसे गेज लेंथ के भीतर सीधा और आगे ताप प्रवहृया न वकया गया हो।
(ग) यवद कोई परीिण नमूना कमी अथिा िुवटपूणय मशीवनोंग को दशायता है तो उसे नष् ट कर वदया जाएगा
और दूसरे नमूने से प्रवतस् थावपत वकया जाएगा।
(घ) सभी नमूनो ोंका सामाय य तापमान पर परीिण वकया जाएगा।
(2) (क) यहाों विवनवदयष् ट परीिण पहले 100 ट्यूब् स के वलए य यूनतम 2 ट्यूब् स पर वकया जाएगा और प्रत्य ेक
खेप की 100 से अवधक ट्यूब् स के मामले में प्रत्य ेक 100 पर एक अथिा उसके वहस् से का परीिण
वकया जाएगा।
(ख) खेप के भीतर सभी ट्यूब् स समान आकार और दीिार की मोटाई िाले समान ताप और ताप प्रवहृया
िाले ट्यूब होगों े।
(3) (क) परीिण नमूने तावलका 2/19 में विवनवदयष्ट स अपेिाओ ोंके अनुरूप होगों े।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 65
(ख) कठोरता परीिण ट्यूब के नमूने की दीिार के खोंड अथिा बाहरी सतह के एक सपाट वहस् से पर
वकया जा सकता है।
तावलका 2/19: यांवत्रक गुण संबंधी अपेिाएं
हृम सों. ग्रेड उत् पादन िमता त य य ता िमता जीएल पर कठोरता
एमपीए एमपीए प्रवतशत
(वकग्रा/वममी2) (वकग्रा/वममी2) दीघीकरण=
य यून. य यून. 50 वममी
य यून.
एचआरबी एचबी
*
अवध. अवध.
(1) (2) (3) (4) (5) (6)
1. SA 179 180 (18.3) 325 (33.1) 35 72 130
2. SA 210 ग्रेड A1 255 (26.1) 415 (42.2) 30 79 143
3. SA 210 ग्रेड C 275 (28.2) 485 (49.3) 30 89 179
4. SA 209 ग्रेड T1 205 (21.1) 380 (38.7) 30 80 146
5. SA 213 ग्रेड T2 205 (21.1) 415 (42.2) 30 85 163
6. SA 213 ग्रेड T5 205 (21.1) 415 (42.2) 30 85 163
7. SA 213 ग्रेड T9 205 (21.1) 415 (42.2) 30 89 179
8. SA 213 ग्रेड T11 205 (21.1) 415 (42.2) 30 85 163
9. SA 213 ग्रेड T12 220 (22.5) 415 (42.2) 30 85 163
10. SA 213 ग्रेड T22 205 (21.1) 415 (42.2) 30 85 163
11. SA 213 ग्रेड T91 415 (42.2) 585 (59.6) 20 25 HRC 250
12. 12X1Mφ 274 (28.0) 441 (45.0) 21 85 163
637 (65.0)
13. X20CrMoV121 490 (50.0) 690 (70.4) 17 25 HRC 250
840 (85.7)
14. SA 213 TP 304 205 (21.1) 515 (52.5) 35 90 192
15. SA 213 TP 304H 205 (21.1) 515 (52.5) 35 90 192
16. SA 213 TP 304L 170 (17.3) 485 (49.5) 35 90 192
17. SA 213 TP 310S 205 (21.1) 515 (52.5) 35 90 192
18. SA 213 TP 316 205 (21.1) 515 (52.5) 35 90 192
19. SA 213 TP 316H 205 (21.1) 515 (52.5) 35 90 192
20. SA 213 TP 316L 170 (17.3) 485 (49.5) 35 90 192
21. SA 213 TP 321 205 (21.1) 515 (52.5) 35 90 192
22. SA 213 TP 321H 205 (21.1) 515 (52.5) 35 90 192
23. SA 213 TP 347 205 (21.1) 515 (52.5) 35 90 192
24. SA 213 TP 347H 205 (21.1) 515 (52.5) 35 90 192
25. SB 167 N06617 240 (24.5) 655 (66.8) 35 - -66 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
*तय यता िमता परीिण नमूने सोंगत सामग्री विवशष् टताओ ोंके अनुसार होगों े।
नोट: काबयन स् टील के लोंबित क्तस् टरप परीिण के वलए य यूनतम दीघीकरण मूल् य अपेिा से 8 वममी तक की
मोटाई िाली दीिार में प्रत्य ेक 0.8 वममी की कमी हेतु प्रवतशत दीघीकरण में 1.5 प्रवतशत कमी की जाएगी।
(4) लोंबाई में कम से कम 63 वममी लोंबे ट्यूब के खोंड को, कोई दरार या िुवट का कोई वच् दशायये वबना
नीचे वदये गये सूि द्वारा की गई गणना के अनुसार प् लेटो ों (H) के बीच वनक्तश् चत दूरी रखते हुए दो
समानाोंतर फ्लैट सतहो ोंके बीच सामाय य तापमान पर चपटा वकया जायेगा।
H = (1 + e) t / e + t/D
जहाों, t = ट्यूब की वनधायररत मोटाई (वममी)
D = ट्यूब का वनधायररत बाहरी व् यास (वममी)
e = वनयताोंक, वनम् नानुसार
e = 0.18% से अवधक विवनवदयष् ट अवधकतम काबयन िाले काबयन स् टील के वलए 0.07
e = 0.18% या उससे कम विवनवदयष् ट अवधकतम काबयन िाले काबयन स् टील के वलए 0.09
e = एलॉय स् टील के वलए 0.08
e = ऑस् टेनेवटक स् टील के वलए 0.09
नोट: N06617 ग्रेड के वलए वकसी फ्लैटवनोंग परीिण की आिश् यकता नही ोंहै।
(5) लोंबाई में लगभग 100 वममी की ट्यूब के एक खोंड को 60 वडग्री के कोण िाले वकसी उपकरण से
फु लाया जाएगा जब तक की ट्यूब का वसरा नीचे वदये गये प्रवतशत तक वबना वकसी दरार के न फै ल
जाये।
तावलका 2/20
हृम सों. आोंतररक और बाह्य व् यास का अनुपात आोंतररक व् यास के य यूनतम फै लाि का प्रवतशत
(1) (2) (3)
1. 0.9 21
2. 0.8 22
3. 0.7 25
4. 0.6 30
5. 0,5 39
6. 0.4 51
7. 0.3 68[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 67
नोट: N06617 ग्रेड के वलए फै लाने अथिा फ्लेररोंग परीिण की आिश् यकता नही ोंहै।
(6) (क)(i) यवद इन विवनयमो ों में वनधायररत एक या अवधक परीिण असफल रहता है तो उसी बैच के दो
अय य ट्यूबो ोंपर इसी प्रकार के दो और परीिण वकये जाएों।
(ii) यवद इनमें से कोई परीिण असफल रहता है, तो उस बैच के ट्यूबो ों की और ताप प्रवहृया की
जाएगी और इस पूरे परीिण को दोहराया जायेगा।
(ख) यवद पुन: वकए गये परीिण सोंतो जनक पाये जाते हैं तो ट्यूब् स को स् िीकार वकया जाएगा।
यवद परीिणो ोंमें असफल होता है, तो ट्यूब् स के पूरे बैच को अस् िीकार कर वदया जाएगा।
(7) (क) विवनमायता द्वारा प्रत् येक ट्यूब का परीिण वकया जाएगा और इसे वडजाइन दबाि के 1.5 गुना तक
हाइडरोवलक दबाि पर खरा उतरना होगा जो वक य यूनतम 1 वकग्रा/वममी2 के अधीन होगा, लेवकन
वनम् नवलक्तखत सूि द्वारा पररकवलत दबाि से अवधक नही ोंहोगा:
P = 2 S t / D
जहाों , P = परीिण दबाि
D = ट्यूब का वनधायररत बाहरी व् यास
t = ट्यूब की दीिार की वनधायररत मोटाई
S = तनाि काबयन और एलॉय स् टील के वलए सामाय य तापमान पर य यूनतम तय यता िमता का 40
प्रवतशत तक होगा और ऑस् टेनेवटक स् टेनलेस स् टील के वलए सामाय य तापमान पर य यूनतम
उत् पादन िमता का 80 प्रवतशत होगा।
(ख) खोंड (क) में कु छ भी वनवहत होने के बािजूद, वनमायता के कायों में हाइडरोवलक परीिण से
छू ट दी जा सकती है, बशते वक अल् टरासोवनक अथिा एडी करोंट अथिा स् टरे फ्ल् स परीिण जैसे
उवचत पद्वत द्वारा नॉन-वडस् टरक्तरि परीिण वकया गया हो।
भाग-IV
49. सीमलेस काबषन, एलॉय ट ील और वनवकल एलॉय पाइप् स- (1) इन विवनयमो ोंमें उच् च तापमान सेिा
के वलए ताप प्रवहृया से और सामाय य तापमान दोनो ों पर तैयार सीमलेस काबयन, एलॉय स् टील और वनवकल
एलॉय पाइप् स शावमल हैं। ये पाइप् स विवनयम 30 में विवनवदयष् ट अपेिाओ ों के अवतरर् त यहाों विवनवदयष् ट सभी
अपेिाओ ोंका पूरी तरह अनुपालन करेंगे।
(2) वडजाइन धातु तापमान के वलए विवनयम 30 की तावलका 2/1 देखें।
(3) (क) ये पाइप् स सीमलेस होगों े और इनका विवनमायण खुली भट्टी अथिा इलैक्त् टरक प्रवहृया अथिा वकसी भी
ऑ् सीजन प्रवहृया द्वारा स् टील से वकया जायेगा।
(ख) यह स् टील रासायवनक सोंघटक की वनम् नवलक्तखत सीमाओ ोंके अनुरूप होगों े, नामत:-68 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 2/21: रासायवनक संघटक (%)
हृम ग्रेड रासायवनक सोंघटक %
सों. काबयन मैंग्नीज वसवलकॉन सल्फर पोटेवशयम हृोवमयम मोवलब्डेनम िैनेवडयम वनवकल ताोंबा अय य तत् ि
(C) (Mn) (Si) (S) (P) (Cr) (Mo) (V) (Ni) (Cu)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (1)
1. एसए 0.25* 0.27 0.10य यून 0.035 0.035अ 0.40** 0.15** 0.08** 0.40* 0.4
106 अवध. 0.93 . अवध. वध. अवध. अवध. अवध. * 0**
अवध
ग्रेड A अवध.
.
2. एसए 0.30* 0.29 0.10य यून 0.03 0.035अ 0.40** 0.15** 0.08** 0.40* 0.4
106 य यून. 1.06 . 5 वध. अवध. अवध. अवध. *अवध 0**
अवध. अवध
ग्रेड B .
.
3. एसए 0.35* 0.29 0.10य यून 0..03 0.035अ 0.40** 0.15** 0.08** 0.40* 0.4
106 अवध. 1.06 . 5 वध. अवध. अवध. अवध. *अवध 0**
अवध. अवध
ग्रेड C .
.
4. एसए 0.10 0.30 0.10 0.02 0.025 ---- 0.44 ---- ---- -----
335 0.20 0.80 0.50 5 अवध. 0.65
ग्रेड अवध.
P1
5. एसए 0.10 0.30 0.10 0.02 0.025 0.50 0.44 ---- ---- -----
335 0.20 0.61 0.30 5 अवध. 0.81 0.65
ग्रेड अवध.
P2
6. एसए 0.15 0.30 0.50 0.02 0.025 4.00 o.45 ---- ---- -----
335 अवध. 0.60 अवध. 5 अवध. 6.00 0.65
ग्रेड अवध.
P5
7. एसए 0.15 0.30 0.25 0.02 0.025 8.00 0.90 ---- ---- -----
335 अवध. 0.60 1.00 5 अवध. 10.0 1.10
ग्रेड अवध.
P9
8. एसए 0.05 0.30 0.50 0.02 0.025 1.00 0.44 ---- ---- -----
335 0.15 0.60 1.00 5 अवध. 1.50 0.65
ग्रेड अवध.
P11
9. एसए 0.05 0.30 0.50 0.02 0.025 0.80 0.44 ---- ---- -----
335 0.15 0.61 अवध. 5 अवध. 1.25 0.65
ग्रेड अवध.
P12[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 69
10. एसए 0.05 0.30 0.50 0.02 0.025 1.90 0.87 ---- ---- -----
335 0.15 0.60 अवध. 5 अवध. 2.60 1.13
ग्रेड अवध.
P22
11. एसए 0.08 0.30 0.20 0.01 0.020 8.00 0.85 0.18 0.40 Cb=0.
335 0.12 0.60 0.50 0 अवध. 9.50 1.05 0.25 अवध.. 06 -
ग्रेड अवध. 0.10
P91 N=0.0
30 -
0.70
Al=0.0
2 अवध..
Ti=0.0
1 अवध..
Zr=0.0
1 अवध..
12. X20C 0.17 1.00 0.50 0.03 0.030 10.0 0.80 0.25 0.30 ----
r 0.23 अवध. अवध. अवध. अवध. 12.5 1.20 0.35 0.80
MoV
121
13. SB 0.05 1.0 1.0 0.01 - 20.02 8.0 - 44.5 0.5 Co:10.
167 0.15 अवध. अवध. 5 4.0 10.0 य यून. अवध 0-15.0;
N06 अवध. . Fe:3.0
617 अवध.;
Al: 0.8-
1.5;
Ti:0.6
अवध.;
B:0.00
6 अवध.
* विवनवदयष् ट अवधकतम काबयन से नीचे प्रत्य ेक 0.01 प्रवतशत की कमी के वलए अवधकतम वनधायररत सीमा से
ऊपर मैग् नीज के 0.06 प्रवतशत िृक्तद् की अनुमवत होगी, वजसकी अवधकतम सीमा 1.35 प्रवतशत होगी।
** Cr + Cu + Mo + Ni + V < 1.0 %
(4) (क) (i) काबयन स्टील ताप से तैयार पाइपो ोंको ताप प्रवहृया करने की आिश्यकता नही ोंहै।
(ii) सामान्य ताप पर तैयार पाइपो ों को अोंवतम रुप से सामान्य तापमान पर प्रवहृया के बाद सब-
वहृवटकल एनील, फु ल एनील या नॉमयलाइवजोंग ताप प्रवहृया वदया जाएगा।
(ख) (i) P91, X20CrMoV121 और N06617 को छोड़कर P1, P2, P5, P9, P11, P12 और P22 ग्रेड के
पाइपो ों को रीहीट वकया जाएगा और फु ल एनील्ड, आइसोथमयल एनील्ड या नामयलाइर्ज् और टेम्पडय
क्तस्थवत में तैयार वकया जाएगा।70 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ii) यवद नामयलाइर्ज् और टेम्पडय िाली क्तस्थवत में तैयार वकया जाता है, तो P1, P2, P11 और P12
ग्रेड के वलए न्यूनतम टेम्पररोंग तापमान 650° सेक्तियस और P5, P9 और P22 ग्रेड के वलए न्यूनतम
टेम्पररोंग तापमान 675° सेक्तियस होगा।
(ग) P1, P2 और P12 ग्रेड के पाइप चाहे ताप प्रवहृया या सामान्य तापमान पर तैयार हो,ों को विवनमायता
के विकि के अनुसार उपरोि खोंड (ख) में वनवदयष्ट स ताप प्रवहृया के बजाय, 650° सेक्तियस से
705° सेक्तियस पर अोंवतम रुप से ताप प्रवहृया वदया जा सकता है।
(घ) P91 ग्रेड को न्यूनतम 1040° सेक्तियस पर नामयलाइज वकया जाएगा और अोंवतम रूप से ताप
प्रवहृया के रूप में न्यूनतम 730° सेक्तियस पर टेम्पर वकया जाएगा।
(ङ) X20CrMoV121 ग्रेड को 1020° सेक्तियस - 1070° सेक्तियस पर नामयलाइज वकया जाएगा और
न्यूनतम एक घोंटे की अिवध के वलए 730° सेक्तियस - 780° सेक्तियस पर टेम्पर वकया जाएगा।
(च) N06617 ग्रेड को 1150 वडग्री सेक्तियस से 1230 वडग्री सेक्तियस पर विवलयन एनील्ड वकया
जाएगा और पानी में ठोंडा वकया जाएगा या अन्य साधनो ोंसे तेजी से ठोंडा वकया जाएगा।
(5) (क)(i) पाइपो ोंको भली प्रकार से तैयार, साफ और उससे हावनप्रद कवमयो ोंको दूर वकया जाएगा।
(ii) िे उवचत रूप से सीधे, वचकने, बेलनाकार और और इस उप-विवनयम में वनवदयष्ट स िहन िमता के
अधीन होगों े। पाइप विवनमायता यह सुवनवश्चत करने के वलए वक उनका अच्छे से मूल्ाोंकन वकया गया
है, पयायप्त सोंख्या में िास्तविक वनरीिण करेगा।
(ख) बाहरी व् यास में अनुमत अोंतर वनम् नानुसार होगा:
तावलका 2/22: काबषन टील के ताप प्रवहृया से तैयार और सामान्य तापमान पर तैयार सीमलेस
पाइप्स
हृम सों. बाहरी व् यास (वममी) अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4)
1. 10.3 से 48.3 तक, 48.3 सवहत 0.40 0.40
2. 48.3 से 114.3 तक, 114.3 सवहत 0..80 0.80
3. 114.3 से 219.1 तक, 219.1 सवहत 1.60 0.80
4. 219.1 से 457.0 तक, 457.0 सवहत 2.40 0.80
5. 457.0 से 660.0 तक, 660.0 सवहत 3.20 0.80
6. 660.0 से 864.0 तक, 864.0 सवहत 4.00 0.80
7. 864.0 से 1219.0 तक, 1219.0 सवहत 4.80 0.80[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 71
तावलका 2/23: X20CrMoV121 और N06617 ग्रेड को छोडकर एलॉय ट ील के सभी ग्रेड के
वलए
हृम सों. ताप प्रवहृया से तैयार और सामान्य तापमान पर तैयार सीमलेस पाइप्स
बाहरी व् यास (वममी) अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4)
1. 10.3 से 48.3 तक, 48.3 सवहत 0.40 0.40
2. 48.3 से 114.3 तक, 114.3 सवहत 0.80 0.80
3. 114.3 से 219.1 तक, 219.1 सवहत 1.60 0.80
4. 219.1 से 300 तक, 300 सवहत 2.40 0.80
5. 300 से अवधक 1% 1%
तावलका 2/24: X20CrMoV121 ग्रेड के वलए
हृम सों. बाहरी व् यास (वममी) अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4)
1. 100 और उससे कम 0.75% 0.75%
2. 100 से 320 तक, 320 सवहत 0.90% 0.90%
3. 320 से अवधक 1.00% 1.00%
तावलका 2/25: N06617 ग्रेड के वलए
हृम सों. बाहरी व् यास (वममी) अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4)
1. सामान्य तापमान पर तैयार सीमलेस पाइप्स
2. 10 से अवधक और 16 से कम 0.13 0.13
3. 16 से 38 0.19 0.19
4. 38 से अवधक 76 तक 0.25 0.25
5. 76 से अवधक 114 तक 0.38 0.38
6. 114 से अवधक 152 तक 0.51 0.51
7. 152 से अवधक 168 तक 0.64 0.64
8. 168 से अवधक 219 तक 0.79 0.79
9. ताप प्रवहृया से तैयार पाइप्स
10. 64 से 114 0.79 0.79
11. 114 से अवधक 165 तक 1.2 1.2
12. 165 से अवधक 235 तक 1.6 1.672 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ग) दीिार की मोटाई में अनुमत अोंतर वनम्नानुसार होगा:-
तावलका 2/26: X20CrMoV121 ग्रेड के वलए
हृम सों. बाहरी व् यास (वममी) प्रवतशत अनुमत अोंतर
बाह्य भीतरी
(1) (2) (3) (4)
1. 100 और उससे कम 12.5 10
2. 100 से 320 तक, 320 सवहत 12.5 12.5
3. 320 से अवधक 15.0 12.5
तावलका 2/27: ग्रेड के वलए N06617
हृम सों. बाहरी व् यास (वममी) अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4)
1. सामान्य तापमान पर तैयार सीमलेस पाइप्स
2. 10 से 16 तक, 16 से कम 15.0 15.0
3. 16 - 38 10.0 10.0
4. 38 से 76 तक 10.0 10.0
5. 76 से 114 तक 10.0 10.0
6. 114 से 152 तक 12.5 12.5
7. 152 से 168 तक 12.5 12.5
8. 168 से 219 12.5 12.5
9. ताप प्रवहृया से तैयार पाइप्स
10. 64 से 114 16.0 12.5
11. 114 से अवधक 165 तक 16.0 12.5
12. 165 से अवधक 235 तक 16.0 12.5
नोट: X20CrMoV121 और N06617 को छोड़कर सभी ग्रेड के वलए, दीिार की विवनवदयष् ट सामाय य
मोटाई के अोंतगयत वकसी भी वबोंदु पर दीिार की य यूनतम मोटाई 12.5 प्रवतशत से अवधक नही ोंहोगी।
(घ) विवनवदयष् ट लोंबाई अथिा वकसी भी लोंबाई में ताप से तैयार सीमलेस और सामाय य तापमान पर तैयार
पाइपो ोंको आडयर वकया जा सकता है। यवद विवनवदयष्ट स लोंबाई का पाइप ऑडयर वकया जाता है तो िहन
िमता वनम् नानुसार होगी:-
तावलका 2/28
हृम सों. ग्रेड लोंबाई (मी) अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4) (5)
1. X20CrMoV121 और N06617 सभी लोंबाई के 6 0
को छोड़कर सभी ग्रेड
2. X20CrMoV121 ग्रेड के वलए 6 और 6 से कम 10 0[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 73
3. 6 से 12 तक, 12 सवहत 15 0
तावलका 2/29: N06617 ग्रेड के वलए
हृम सों. पाइप का बाहरी व् यास (वममी) लोंबाई में अनुमत अोंतर (वममी)
बाह्य भीतरी
(1) (2) (3) (4)
1. 50.8 से कम 3.2 0
2. 50.8 और 50.8 से अवधक 4.8 0
(6) (क) यहाों नीचे उप-वनयमो ों में विवनवदयष् ट चपटा करने और फै लाने या फ्लेररोंग के वलए अपेवित
परीिण नमूने अपसेवटोंग, स् िेवगोंग, फै लाने अथिा वकसी अय य प्रकार के प्रचालन के वनधायरण
अथिा लोंबाई में काटे जाने पूिय तैयार ट्यूब के वसरे से वलये जाएोंगे और वसरे पर वचकने और
खुरदुरेपन अथिा कवमयो ोंसे मु् त वकए जाएोंगे।
(ख) यवद िाोंवछत और व् यिहायय हो तो परीिण मशीन की िमता तक ट्यूब के पूरे खोंड पर तय यता
िमता परीिण वकया जाएगा। बड़े आकार के ट्यूब के वलए तय यता िमता परीिण का नमूना
ट्यूब से लोंबाई में काटी गई क्तस्टरप होगी और वजसे गेज लेंथ के भीतर सीधा और आगे ताप
प्रवहृया न वकया गया हो।
(ग) यवद कोई परीिण नमूना कमी अथिा िुवटपूणय मशीवनोंग को दशायता है तो उसे नष् ट कर वदया
जाएगा और दूसरे नमूने से प्रवतस् थावपत वकया जाएगा।
(घ) सभी नमूनो ोंका सामाय य तापमान पर परीिण वकया जाएगा।
(7) उप-वनयमो ोंमें विवनवदयष् ट परीिण पहले 100 ट्यूब् स के वलए य यूनतम 2 ट्यूब् स पर वकया जाएगा और
प्रत्य ेक 100 पर एक अथिा प्रत्य ेक खेप की 100 से अवधक ट्यूब् स के मामले में उसके वहस् से का
परीिण वकया जाएगा। खेप के भीतर सभी ट्यूब् स समान आकार और दीिार की मोटाई िाले समान
ताप और ताप प्रवहृया िाले ट्यूब होगों े।
(8) (क) पाइप से लोंबित वदशा में काटे गये ऐसे परीिण वहस् से पर तय यता िमता परीिण वकया जाये
वजसकी बाद में ताप प्रवहृया न की गई हो और न ही गेज लेंथ में सीधा वकया गया हो। विकल् प के
रूप में पाइपो ोंका परीिण पूणय अनुप्रस् थ काट पर भी वकया जा सकता है।74 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) चयवनत पाइपो ोंके वसरो ोंसे काटे गये परीिण वहस् से उप-वनयमो ोंमें वनवदयष्ट स अपेिाओ ों के अनुरूप
होने चावहए।
तावलका 2/30
हृम सों. ग्रेड उत् पादन िमता िहन िमता जी एल पर प्रवतशत
एमपीए एमपीए दीघीकरण
(वकग्रा/वममी2) (वकग्रा/वममी2) = 50 वममी य यून. *
य यून. य यून. सोंपूणय ट्यूब परीिण
हेतु
(1) (2) (3) (4) (5)
1. एसए 106 ग्रेड A 205 (21.1) 330 (33.1) 35
2. एसए 106 ग्रेड B 240 (24.7) 415 (42.2) 30
3. एसए 106 ग्रेड C 275 (28.2) 485 (49.3) 30
*तय यता िमता परीिण नमूना सोंगत सामग्री विवशष् टताओ ोंके अनुरूप होगा।
नोट: लोंबित क्तस् टरप परीिण के वलए, य यूनतम अपेवित दीघीकरण का वनधायरण वनम् नवलक्तखत सूि द्वारा
वकया जायेगा:
e = 1940 (A 0.2/U0.9)
जहाों e = य यूनतम दीघीकरण 50.8 वममी में, प्रवतशत वनकटतम 0.5 प्रवतशत तक सटीक होगा।
A = विवनवदयष् ट बाहरी व् यास अथिा नमूने की वनक्तश् चत चौड़ाई और दीिार की विवनवदयष् ट मोटाई के
आधार पर तय यता िमता परीिण नमूने का िगय वममी में अनुप्रस् थ काट िेि जो वक वनकटतम 6.45
िगय वममी तक सटीक होगा। यवद इस प्रकार पररकवलत िेि 484 िगय वममी से अवधक है तो िेि को
484 िगय वममी माना जाएगा। यवद पररकवलत िेि 484 िगय वममी से कम है तो िास्त विक िेि को
स् िीकार वकया जाएगा।
U = एमपीए में विवनवदयष् ट तय यता िमता
तावलका 2/31: एलॉय ट ील के वलए यांवत्रक गुण अपेिाएं
हृम सों. ग्रेड उत् पादन िमता तय यता िमता जीएल पर प्रवतशत
एमपीए (वकग्रा/वममी) य यून. एमपीए (वकग्रा/वममी) दीघीकरण = 50
य यून. वममी य यून. *
(1) (2) (3) (4) (5)
1. SA 335 Gr P1 205 (21.1) 380 (38.7) 30
2. SA 335 Gr P2 205 (21.1) 380 (38.7) 30[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 75
3. SA 335 Gr P5 205 (21.1) 415 (42.2) 30
4. SA 335 Gr P9 205 (21.1) 415 (42.2) 30
5. SA 335 Gr P11 205 (21.1) 415 (42.2) 30
6. SA 335 Gr P12 220 (22.5) 415 (42.2) 30
7. SA 335 Gr P22 205 (21.1) 415 (42.2) 30
8. SA 335 Gr P91 415 (42.2) 585 (59.8) 20
9. X20CrMoV121 490 (50.0) 690 (70.4) 17
840 (85.6)
10. SB 167 240 (24.5) 655 (66.8) 35
N06617
*तय यता िमता परीिण नमूना सोंगत सामग्री विवशष् टताओ ोंके अनुरूप होगा।
(9) 60.3 वममी और इससे कम के बाहरी व् यास के पाइपो ों का बेंड परीिण वकया जाएगा। पयायप् त लोंबाई का
पाइप जो बेलनाकार मेनडरेल, वजसका व् यास पाइप के सामाय य व् यास का 12 गुना हो, के ऊपर सामायय
तापमान पर वबना दरार आए 90 वडग्री मोड़ा जा सके िह पाइप इस परीिण में खरा उतरेगा।
बशते वक ग्रेड N06617 के वलए बेंड परीिण की आिश् यकता हो।
(10) (क) 60.3 वममी से अवधक बाहरी व् यास के पाइपो ोंके वलए, फ्लैटवनोंग परीिण वकया जाएगा और लोंबाई
में कम से कम 63 वममी लोंबे पाइप के खोंड में कोई दरार या िुवट का कोई वच् दशायये वबना नीचे वदये गये
सूि द्वारा की गई गणना के अनुसार प् लेटो ों(H) के बीच वनक्तश् चत दूरी रखते हुए दो समानाोंतर सपाट सतहो ोंके
बीच सामाय य तापमान पर चपटा वकया जायेगा:
(1 + e) t
H = -----------
e + t/D
जहाों, t = पाइप की वनधायररत मोटाई (वममी)
D = पाइप का वनधायररत बाहरी व् यास (वममी)
e = वनयताोंक, वनम् नानुसार
e = 0.18% से अवधक विवनवदयष् ट अवधकतम काबयन िाले काबयन स् टील के वलए
0.07
e = 0.18% या उससे कम विवनवदयष् ट अवधकतम काबयन िाले काबयन स् टील के
वलए 0.09
e = एलॉय स् टील के वलए 0.0876 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) 254 वममी अथिा इससे अवधक व् यास िाले पाइप के वलए, फ्लैटवनोंग परीिण के स् थान पर
बेंड परीिण वकया जा सकता है। बेंड परीिण के नमूने को सामाय य तापमान पर 180 वडग्री
मोड़ा जाएगा लेवकन मोड़े गये वहस् से के बाहरी वहस् से में दरार न आए। मोड़ का आोंतररक
व् यास 25 वममी होगा। फ्लैटवनोंग परीिण के वलए बेंड परीिण का प्रवतस् थापन हृे ता के
अनुमोदन के अधीन होगा।
(ग) ऐसे पाइप के वलए वजसका व् यास 635 वमलीमीटर (वममी) से अवधक है और वजसका व् यास
ि दीिार की मोटाई का अनुपात 7.0 या उससे कम है, फ्लैटवनोंग परीिण के स् थान पर उप-
विवनयम (9) में िवणयत बेंड परीिण वकया जाएगा।
बशतें वक N06617 ग्रेड के वलए वकसी फ्लैटवनोंग परीिण की आिश् यकता हो।
(11) (क) यवद इन विवनयमो ोंमें वनधायररत एक या अवधक परीिण असफल रहता है, तो उसी बैच के दो
अय य पाइपो ों पर इसी प्रकार के दो और परीिण वकये जाएों। यवद इनमें से कोई परीिण
असफल रहता है तो उस बैच के पाइपो ों पर और ताप प्रवहृया की जाएगी और इस पूरे
परीिण को दोहराया जायेगा।
(ख) यवद पुन: वकए गये परीिण सोंतो जनक पाये जाते हैं तो पाइपो ों को स् िीकार वकया जाएगा।
यवद परीिणो ोंमें असफल होता है तो पाइपो ोंके पूरे बैच को अस् िीकार कर वदया जाएगा।
(12) (क) विवनमायता द्वारा प्रत्य ेक पाइप का परीिण वकया जाएगा और इसे वडजाइन दबाि के गुना 1.5
वलक्तखत सूि द्वारा पररकवलत तक हाइडरोवलक दबाि पर खरा उतरना होगा, जो वक वनम् न
दबाि से अवधक नही ों होगा। परीिण प्रमाणपि में प्रदवशयत कायायत् मक दबाि के अभाि में
परीिण प्रमाणपि में दशायये गये परीिण दबाि को 1.5 से भाग देने से प्राप् त पररणाम
अवधकतम कायायत् मक दबाि होगा:
P = 2 S t / D
जहाों , P = परीिण दबाि
D = पाइप का वनधायररत बाहरी व् यास
t = पाइप की दीिार की वनधायररत मोटाई
S = तनाि सामाय य तापमान पर य यूनतम तय यता िमता के 40 प्रवतशत
तक होगा।
(ख) उपयुय् त खोंड (क) में कु छ भी वनवहत होने के बािजूद, वनमायता के कायों में हाइडरोवलक
परीिण से छू ट दी जा सकती है, बशते वक अल्ट रासोवनक अथिा एडी करोंट अथिा स्ट रे
फ्ल् स परीिण जैसे उवचत पद्वत द्वारा नॉन वडस् टरक्तरि परीिण वकया गया हो।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 77
भाग-V
50. काबषन, एलॉय और टेनलेस टील की काल्पटंग- (1) इस विवनयमन में बॉयलर और स्टीम पाइप के
वनमायण में उपयोग की जाने िाले काबयन, एलॉय और स्टेनलेस स्टील काक्तस्टोंग शावमल होगों े, वजसमें उनकी
वफवटोंग भी शावमल है।
(2) (क) सभी काक्तस्टोंग, ताप प्रवहृया की वनम्नानुसार क्तस्थवत में आपूवतय की जाएगी:-
(i) काबयन स्टील काक्तस्टोंग: एनीवलोंग, या नॉमयलाइवजोंग, या नॉमयलाइवजोंग और टेम्पररोंग।
(ii) एलॉय स्टील काक्तस्टोंग: एनीवलोंग, या नॉमयलाइवजोंग और टेम्पररोंग, या कठोर बनाना या ठोंडा करना
और टेम्पररोंग।
(iii) स्टेनलेस स्टील काक्तस्टोंग: विलयन एनीवलोंग।
(ख) ताप प्रवहृया या तो विवनमायता या सिम व्यक्ति के वििेक के अनुसार वकया जाएगा और विवनयम
54 में विवनवदयष्ट स याोंविक गुण प्रदान करने के वलए उपयुि तापमान पर वकया जाएगा ।
(3) सभी काक्तस्टोंग की उवचत रूप से फे टवलोंग और डरेवसोंग की जाएगी और वनरीिण उद्देश्यो ों के वलए सभी
सतहो ोंको अच्छी प्रकार से साफ वकया जाएगा।
(4) रफ मशीवनोंग या अोंवतम रुप से मशीवनोंग के बाद काक्तस्टोंग की कास् ट के रूप में आपूवतय की जा सकती
है। नॉन-वडक्तस्टरक्तरि परीिण, सोंगत सामग्री विवशष्ट सताओ ों की नॉन-वडक्तस्टरक्तरि परीिण (एनडीई)
आिश्यकताओ ोंके अनुसार कास्ट या मशीन्ड् क्तस्थवत में वकया जा सकता है।
51. विवनमाषण की प्रवहृया:- (1) काक्तस्टोंग के वलए इस्तेमाल वकया जाने िाला स्टील एक खुली भट्टी (ओपेन
अथय) या इलेक्तररक फनेस या वकसी अन्य प्रवहृया द्वारा बनाया जाएगा जो स्टील को समकि गुण देता है।
(2) स्टील तावलका 2/32 में विवनवदयष्ट स रासायवनक सोंरचना के अनुरूप होना चावहए।78 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 2/32 रासायवनक संघटन (%)
हृम सं. काबषन मैंगनीज फास्पोरस सल्फर वसवलकोन हृोवमयम वनवकल मोवलब्डेनम िैनेवडयम नाइटरोजन अन्य
ग्रेड
(C) (Mn) (P) (S) (Si) (Cr) (Ni) (Mo) (V) (N)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
1. SA352
0.30 1.00 0.04 0.045 0.60 0.50 0.50 0.20 0.03 - Cu-0.30
LCB
2. SA
216 0.30 1.20 0.04 0.045 0.60 0.50 0.50 0.20 0.03 - Cu-0.30
WCB
3. SA
216 0.25 1.20 0.04 0.045 0.60 0.50 0.50 0.20 0.03 - Cu-0.30
WCC
4. SA
352 0.25 1.20 0.04 0.045 0.60 0.50 0.50 0.50 0.03 Cu-0.30
LCC
5. SA
0.05– 0.50– 1.00- Cu-0.50
217 0.04 0.045 0.60 0.50 0.45–0.65 - -
0.20 0.80 1.50 W-0.10
WC6
6. SA
0.05– 0.40– 2.00– Cu-0.50
217 0.04 0.045 0.60 0.50 0.90-1.20 - -
0.18 0.70 2.75 W-0.10
WC9
7. Nb -
SA 0.060–
0.08– 0.30– 0.20– 0.18– 0.030–
217 0.030 0.010 8.0–9.5 0.40 0.85–1.05 0.10
0.12 0.60 0.50 0.25 0.070
C12A Al- 0.02
Ti- 0.01[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 79
Zr - 0.01
8. SA
18.0-
351 0.08 1.50 0.040 0.040 2.00 8.0-11.0 0.50 - - -
21.0
CF8
9. SA
18.0–
351 0.08 1.50 0.040 0.040 1.50 9.0–12.0 2.0–3.0 - - -
21.0
CF8M
10. SA
18.0–
351 0.08 1.50 0.040 0.040 2.00 9.0-12.0 0.50 - - -
21.0
CF8C
नोट: 1. अवधकतम जब एकल मान विवनवदयष्ट स हो
2. 0.3%से अवधक काबयन सामग्री न होने की शतय बॉयलर वनमायता और वनरीिण प्रावधकारी के बीच सहमवत के अधीन हो सकती है।80 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
52. कवमयो ंको हटाना और सुधार करना- स्टील काक्तस्टोंग की सतह साफ होनी चावहए और यह कवमयो ों
से मुि होनी चावहए तथा आकार या मोटाई में विवनवदयष्ट स अनुमत वभन्नता से अवधक नही ों होनी चावहए।
वनरीिण प्रावधकारी के अनुमोदन से के िल िेक्तल्डोंग द्वारा ही कवमयो ों की मरम्मत की जा सकती है, बशते वक
यवद आिश्यक हो तो िेक्तल्डोंग के बाद काक्तस्टोंग को तनाि से मुि कर दी गई हो।
53. परीिणो ंकी सं् या और परीिण नमूनो ंका प्रािधान – तय यता और बेंड परीिण वहस् सो ों को प्रत्य ेक
गलन प्रवहृया या ताप प्रवहृया बैच के प्रवतवनवध परीिण नमूनो ोंसे वनम् नानुसार तैयार वकया जाता है:-
(i) (क) परीिण नमूना, विवनमायता और सिम व् यक्त् त के बीच सहमवत के अनुसार काक्तस् टोंग से
सोंबद् हुआ अथिा कास्ट से अलग वकया गया होगा।
(ख) सोंबद् परीिण नमूने हेतु करार में सटीक स् थान और सोंलग् नता की पद्वत शावमल होगी। यवद
सिम व् यक्त् त विवनमायता के साथ ऐसा कोई करार नही ोंकरता है तो परीिण नमूने प्रदान करने
का तरीका विवनमायता द्वारा वनधायररत होगा।
(ग) तथावप विवनमायता का वििेकावधकार, नीचे उप वनयम (4) में दशायये गये एक से अवधक गलन
प्रवहृया से तैयार काक्तस् टोंग के परीिण पर लागू नही ोंहोगा।
(ii) (क) यवद परीिण नमूनो ोंको काक्तस् टोंग के साथ सोंलग् न वकया जाता है, तो प्रत्य ेक गलन प्रवहृया से
कम से कम एक तय यता िमता परीिण और यवद आिश् यक हो एक बेंड परीिण वकया
जाएगा।
(ख) ऐसे परीिण नमूनो ोंको तब तक काक्तस् टोंग से अलग नही ोंवकया जाएगा जब तक वक काक्तस् टोंग का
ताप प्रवहृया पूरा न कर वलया जाये और सिम व् यक्त् त द्वारा उन पर स् टाम् प न लगा दी जाये।
(ग) परीिण नमूनो ोंपर ताप प्रवहृया करने के पश् चात सिम व् यक्त् त द्वारा स् टाम् प लगाया जाएगा।
(iii) (क) यवद परीिण नमूने अलग-अलग कास् ट वकये जाते हैं, तो उय हें प्रत्य ेक गलन प्रवहृया से
काक्तस् टोंग की सोंख् या के 2 प्रवतशत तक उपलब्ध कराए जाएोंगे, लेवकन यह वकसी भी मामले में
प्रवत गलन प्रवहृया दो नमूने से कम नही ों होगी, वसिाय विवनमायता और सिम व् यक्त् त के बीच
वकये गये करार द्वारा ऐसा वकया गया हो।
(ख) परीिण नमूनो ों को उसी सामग्री के मोल् ड में कास् ट वकया जायेगा जैसा वक काक्तस् टोंग के वलए
प्रयोग वकया गया हो और कासट वटोंग के रूप में उसी अिवध के वलए ऐसा वकया जायेगा और
उसी लेडल से वकया जायेगा।
(ग) सिम व् यक्त् त द्वारा नमूनो ोंपर स् टाम्प लगाई जाएगी, तावक उस काक्तस् टोंग की पहचान की जा सके
वजससे िह सोंबोंवधत हैं।
(iv) (क) जब वकसी काक्तस् टोंग को एक से अवधक गलन प्रवहृया से तैयार वकया जाता है, तो काक्तस् टोंग
पर वजतना सोंभि हो एक दूसरे से दूर क्तस् थत परीिण नमूनो ों से कम से कम 4 तय यता िमता
परीिण और जहाों आिश् यक है 4 बेंड परीिण वकये जाएोंगे।
(ख) कु छ परीिण नमूने काक्तस् टोंग के ऊपरी वहस् से से और अय य वनचले वहस् से से वलये जाएोंगे जैसा भी
िट यिहायय हो।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 81
(v) परीिण नमूनो ोंकी, उनका प्रवतवनवधत् ि करने िाली काक्तस् टोंग के साथ ताप प्रवहृया की जाएगी।
54. त् यता परीिण:- (1) सामाय य तापमान पर अपर यील् ड प् िाइोंट, सामाय य तापमान पर विवनवदयष् ट
य यूनतम तय यता िमता के 50 प्रवतशत से कम नही ोंहोना चावहए।
(2) सामग्री के िवधयत तापमान (Et) के 0.2 प्रवतशत के साक्ष् य सीमा के तनाि के य यूनतम मूल् य का
पररकलन, विवनयम 37 के अोंतगयत तावलका 2/5 में वदये गये अनुपात E/R के मूल् य द्वारा सामायय
t 20
तापमान (R ) पर य यूनतम वनधायररत तय यता िमता से गुणा करके प्राप्त वकया जाता है।
20
(3) तथावप, यवद तय यता परीिण वकसी अय य मानक के अनुरूप नमूनो ोंपर वकया जाता है, तो सामग्री को
स् िीकार वकया जाएगा बशते वक विवनयम के अोंतगयत परीिण वहस् सो ों के पररमाप के आधार पर
पररकवलत तय यता िमता और दीघीकरण उपयुय् त अपेिाओ ों के अनुरूप होगों े।
(4) परीिण नमूने नीचे दी गई अपेिाओ ोंके अनुरूप होने चावहए:
तावलका 2/33
हृ ग्रेड मेके वनकल गुण (् यूनतम, जब एकल मान विवनवदषष्ट हो)
म टीएस िाईएस जीएल पर प्रवतशत दीघीकरण= 50
सं. एमपीए एमपीए mm ् यून.*.
(वकग्रा/वममी) (वकग्रा/वममी)
(1) (2) (3) (4) (5)
1. SA 352 450-620 (45.8-
240 (24.5) 24
LCB 63.2)
2. SA 216 485 to 655 (49.5-
250 (25.5) 22
WCB 66.8)
3. SA 216 485 to 655 (49.5-
275 (28) 22
WCC 66.8)
4. SA 352 485-655 (49.5-
275 (28) 22
LCC 66.8)
5. SA 217 485-655 (49.5-
275 (28) 20
WC6 66.8)
6. SA 217 485-655 (49.5-
275 (28) 20
WC9 66.8)
7. SA 217 585-760 (59.6-
415 (42.3) 18
C12A 77.5)
8. SA 351
485 (49.5) 205 (21) 35
CF8
9. SA 351 485 (49.5) 205 (21)
30
CF8M
10. SA 351 485 (49.5) 205 (21)
30
CF8C
* तय यता परीिण नमूना सोंगत सामग्री विवशष् टताओ ों के अनुरूप होगा।82 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
55. बेंड परीिण- (1) बेंड परीिण ऐसे परीिण वहस् सो ोंपर वकया जाएगा वजनके आयताकार खोंड 25 वममी
चौड़े और 19 वममी मोटे हो।ों
(2) परीिण वहस् सो ों की मशीवनोंग की जाएगी और उनके वसरो ों को 1.6 वममी की विज् या तक गोल वकया
जाएगा तथा पतले वहस् से के ऊपर मोड़ा जाएगा।
(3) बेंड परीिण को दबाि द्वारा अथिा ब् लो द्वारा वकया जा सकता है और परीिण वहस् से को 25 वममी िाली
विज् या पर कम से कम तावलका 2/34 में वदये गये कोण पर मोड़े जाने पर वबना दरार के खरा उतरना
चावहए:
तावलका 2/34
हृम सं. काल्पट ंग का ग्रेड बेंड का ् यूनतम कोण
(1) (2) (3)
1. M1 समूह 1 & 2 M3 समूह 1 & 2, M4 समूह1 120°
2. M5A समूह1, M5B समूह1, M15E समूह1 90°
3. M8 समूह 1 & 2 and M43 कोई परीिण नही ों
(4) िैकक्तल् पक रूप से, बेंड परीिण के वलए नमूना तैयार करना, परीिण पद्वत और स् िीकाययता मानदोंड
सोंगत सामग्री विवशष् टताओ ों के अनुरूप होगों े।
56. अवतरर त परीिण- (1) (क) यवद मूल परीिण वहस् सो ों में से कोई वहस् सा याोंविक परीिण में असफल
रहता है तो उसी काक्तस् टोंग के दो अय य नमूनो ों का चयन वकया जाएगा और इसी प्रकार के परीिण वकये
जाएोंगे।
(ख) विवनमायता के पास अवधकार होगा वक यवद िह चाहे तो दो अय य नमूनो ोंके चयन से पूिय काक्तस् टोंग को पुन:
ताप प्रवहृया प्रदान कर सकता है।
(ग) यवद वकए गये दो अय य परीिण इस मानक की अपेिाओ ों को पूरा करते हैं तो उनके प्रवतवनवधत् ि िाली
काक्तस् टोंग् स को स् िीकार वकया जाएगा। यवद पुन: वकया गया कोई परीिण असफल होता है तो उनके
प्रवतवनवधत् ि िाली काक्तस् टोंग को अस् िीकार कर वदया जाएगा।
(2) सिम व् यक्त् त ताप प्रवहृया िाले काक्तस् टोंग के कठोरता परीिण के वलए कह सकता है।
(3) (क)(i) सिम व् यक्त् त काक्तस् टोंग की रेवडयाग्रावफक जाोंच अथिा अय य नॉन-वडस् टरक्त् टि परीिण के वलए
कह सकता है और उवचत न पाई गई काक्तस् टोंग पर विवनयम 52 के अनुरूप काययिाही की जाएगी।
(ii) यवद सिम व् यक्त् त द्वारा िेक्तल् डोंग मरम् मत की मोंजूरी दी जाती है, तो विवनयम 57 के अनुसार ऐसा वकया
जाएगा।
(ख) अनुमत कायायत् मक तनाि के पररकलन में 80 प्रवतशत से अवधक घटक िाले उच् च श्रेणी की काक्तस् टोंग
वनम् नवलक्तखत वनरीिण अपेिाओ ोंके अधीन होगी, अथायत:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 83
(i) (क) सभी महत् िपूणय स् थानो ों पर रेवडयोग्रावफक अथिा अल् टरासोवनक पद्वतयो ों द्वारा प्रत्य ेक काक्तस् टोंग
की जाोंच की जाएगी और इय हें हावनप्रद कवमयो ोंसे मु् त होना चावहए।
(ख) सभी काक्तस् टोंग की इस स् तर तक पूरी तरह मशीवनोंग की जाएगी वक सभी महत्ि पूणय खोंडो ों पर
पूरी मोटाई हो।
(ii) सभी काक्तस् टोंग की मैग् नेवटक-पावटयकल अथिा पेवनटरेट-फ्लूड प्रवहृया अथिा वघसाई या मशीवनोंग
और इवचोंग द्वारा सभी महत् िपूणय स् थानो ोंकी जाोंच की जाएगी।
(iii) (क) काक्तस् टोंग जो िुवटपूणय पाई जाएोंगी उय हें अस् िीकार कर वदया जाएगा अथिा जाोंच प्रावधकारी की
सोंतुक्तष् ट के अनुसार उनकी मरम् मत की जाएगी।
(ख) यवद िेक्तल् डोंग द्वारा मरम् मत की गई हो, तो काक्तस् टोंग को इसके पश् चात तनाि प्रवहृया अथिा ताप
प्रवहृया से गुजरना होगा।
(ग) उवचत न पाई गई काक्तस् टोंग का विवनयम 57 के अनुसार वनधायररत प्रवहृया से गुजरना होगा।
(घ) काक्तस्ट ोंग के मरम्म त िाले वहस्स ो ोंकी इस उप-विवनयम के उप-खोंड (i) के अनुसार सिम व्य क्त्त
द्वारा पुन: जाोंच की जाएगी और उसे यह वदखाया जाएगा वक िह यह वकसी हावनप्रद कमी से
मु् त है।
(iv) काक्तस् टोंग वजसे 0.90 गुणित् ता घटक प्रदान वकया गया है, उय हें उपयुय् त जाोंच वकये जाने और
सोंतो जनक पाये जाने के पश् चात उन पर ‘G’ उपयु् त वच् द्वारा स् पष् ट और स् थाई रूप से अोंवकत
वकया जाएगा।
(4) उप-विवनयम 3 के खोंड (क) के प्रािधान उन काक्तस् टोंग् स पर लागू होगों े जो उच् च श्रेणी के ऐसे काक्तस् टोंग से
अलग हैं जो विवनयम 170 के अोंतगयत बॉयलर के शैल और इोंटीग्रल सुपर हीटर डरम और हैडर के वलए
अनुमत कायायत् मक तनाि के पररकलन में 80 प्रवतशत से अवधक घटक िाले काक्तस् टोंग में आते हैं।
57. िेल्पल् डंग के वलए प्रवहृया- (1) स् टील काक्तस् टोंग की आकय -िेक्तल् डोंग मरम् मत में काययकु शलता के उच् च
मानक को बनाये रखने के वलए, वनम् नवलक्तखत य यूनतम अपेिाओ ों को ध् यान में रखते हुए एक वलक्तखत प्रवहृया
का अनुपालन वकया जाएगा।
(2) (क) स् टील की सतह वजसे िेल् ड वकया जाना है, को साफ और सभी बाहरी तत्ि ो ों से मु् त होना चावहए
अय यथा इसका पररणाम खराब पेवनटरेशन और अनमोल् ड िेल् ड मैटल के रूप में होगा।
(ख) दरारो ों की िेक्तल् डोंग के वलए तैयारी U अथिा V वकस् म के अनुरूप होनी चावहए। जब बाद िाले
प्रकार का उपयोग वकया जाता है तो इसमें शावमल कोण 70 से कम नही ोंहोना चावहए। जहाों काक्तस् टोंग
के पूरे खोंड तक दरारें फै ली हो ों तो एकल और दोहरी तैयारी के बीच विकल् प, U अथिा V का
वनधायरण वनम् नानुसार होगा-
(i) काक्तस् टोंग की मोटाई;
(ii) खराबी का स् थान। दोहरी तैयारी में U अथिा V, U अथिा V का रूट पयायप् त रूप से खुला होना
चावहए तावक पूणय पेवनटरेशन सुवनक्तश् चत वकया जा सके ।84 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) इलै् टरोडटस का चयन सोंबोंवधत सामग्री समूह के अनुरूप होना चावहए। इलै् टरोड के उपयोग
के वलए इलै् टरोड के विवनमायता की वसफाररशो ोंका सख् ती से पालन वकया जाना चावहए।
(4) सोंघटक में अोंतर, व् यापक वडजाइन और अपेवित िेक्तल् डोंग की सीमा ऐसी शतें स् थावपत वकये जाने के
वलए विवनवदयष्ट स वनयम बनाने का असोंभि बनाती हैं, जो वक प्री-हीवटोंग पर लागू होनी चावहए। उपयु् त
पररिवतययो ों को ध् यान में रखते हुए प्रत्य ेक काक्तस् टोंग पर विचार करने पर यवद प्री-हीट वकया जाना
आिश् यक पाया जाता है, तो ऐसी प्री-हीवटोंग 150 वडग्री सेक्तियस से 300 वडग्री सेक्तियस के
तापमान पर की जानी चावहए।
(5) (क) काक्तस् टोंग को सामाय य ताप प्रवहृया देने के पश् चात जब िेक्तल् डोंग की जाती है तो पुन: ताप प्रवहृया
देना आिश् यक हो सकता है। यह प्रवहृया वसफय ऐसे मामलो ों पर लागू की जानी चावहए जहाों िेक्तल् डोंग
का उपयोग या तो आोंतररक तनाि को बााना हो सकता है जो वक काक्तस् टोंग अथिा स् थानीय कठोर
वहस् सो ों के वलए हावनकर होगा जो वक मशीवनोंग प्रवहृया में समस् या उत् पय न करेगी। जहाों यह
अवतरर् त ताप प्रवहृया अपनाई जाती है िहाों, जहाों तक सोंभि हो, काक्तस् टोंग को िेक्तल् डोंग के पश् चात
ठोंडा नही ोंहोने देना चावहए, लेवकन उसे िॉमय फनेस में चाजय वकया जाना चावहए और ऐसे उपयु् त
टेम् पररोंग तापमान पर री-हीट वकया जाना चावहए जो वक सामायय त: 550 वडग्री सेक्तियस से कम न
हो।
(ख) इस अवतरर् त प्रवहृया को लागू करने की सलाह पर विचार करने के दौरान काक्तस् टोंग के
भौवतक गुणो ों पर इसके प्रभाि को ध् यान में रखा जाना चावहए। यवद यह प्रवहृया अथिा िेक्तल् डोंग इस
प्रकार की जाती है वक इसका भौवतक गुणो ों पर प्रवतकू ल प्रभाि पड़े तो, इसे सोंतो जनक गुण प्राप् त
करने के वलए अपेवित पूणय ताप प्रवहृया से प्रवतस् थावपत वकया जाना चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 85
भाग-VI
58. काबषन, एलॉय, ट ेनलेस ट ील और वनवकल एलॉय के फोवजिंग- (1) फोवजिंग के वलए इस् तेमाल वकये जाने िाले स् टील का वनमायण खुली भट्टी (ओपेन
अथय) अथिा इलैक्त् टरक अथिा मूल ऑ् सीजन प्रवहृया अथिा वकसी भी ऐसी प्रवहृया द्वारा वकया जाएगा जो स् टील को समकि गुण प्रदान करते हो।ों
(2) (क) इस स् टील में 0.05 प्रवतशत से अवधक सल् फर अथिा फास् फोरस नही ोंहोना चावहए।
(ख) यह स् टील तावलका 2/35 में विवनवदयष् ट रासायवनक सोंघटक के अनुरूप होगा:
तावलका 2/35: रासायवनक संघटक (%)
हृम काबषन मैंगनीज फास्पोरस सल्फर वसवलकोन हृोवमयम वनवकल मोवलब्डेनम िैनेवडयम नाइटरोजन अन्य
ग्रेड
सं. (C) (Mn) (P) (S) (Si) (Cr) (Ni) (Mo) (V) (N)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
1. SA 266 Gr1 0.40– 0.15–
0.30 0.025 0.025 - - - - - -
1.05 0.35
2. SA 266 Gr2 0.40– 0.15–
0.30 0.025 0.025 - - - - - -
1.05 0.35
3. SA 266 Gr3 0.80– 0.15–
0.35 0.025 0.025 - - - - - -
1.35 0.35
4. SA 350 LF1- 0.60– 0.15– Nb-0.02
0.30 0.035 0.040 0.30 0.40 0.12 0.08 -
Note 4 1.35 0.30 Cu-0.04
5. SA 350 LF2- 0.60– 0.15– Nb-0.02
0.30 0.035 0.040 0.30 0.40 0.12 0.08 -
Note 4 1.35 0.30 Cu-0.04
6. SA 105 - Note 4 0.60– 0.10–
0.35 0.035 0.040 0.30 0.40 0.12 0.08 - Cu-0.4
1.05 0.35
7. SA 182 F1 0.60– 0.15–
0.28 0.045 0.045 - - 0.44–0.65 - - -
0.90 0.35
8. SA 182 F2 0.05– 0.30– 0.10– 0.50–
0.040 0.040 - 0.44–0.65 - - -
0.21 0.80 0.60 0.8186 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
9. SA 182 F11 Cl 1 0.05– 0.30– 0.50– 1.00–
0.030 0.030 - 0.44–0.65 - - -
0.15 0.60 1.00 1.50
10. SA 182 F11 Cl 2 0.10– 0.30– 0.50– 1.00–
0.040 0.040 - 0.44–0.65 - - -
0.20 0.80 1.00 1.50
11. SA 182 F11 Cl 3 0.10– 0.30– 0.50– 1.00–
0.040 0.040 - 0.44–0.65 - - -
0.20 0.80 1.00 1.50
12. SA 182 F12 Cl 1 0.05– 0.30– 0.80–
0.045 0.045 0.50 - 0.44–0.65 - - -
0.15 0.60 1.25
13. SA 182 F12 Cl 2 0.10– 0.30– 0.10– 0.80–
0.040 0.040 - 0.44–0.65 - - -
0.20 0.80 0.60 1.25
14. SA 182 F22 Cl 0.05– 0.30– 2.00–
0.040 0.040 0.50 - 0.87–1.13 - - -
1,3 0.15 0.60 2.50
15. SA 182 F5 0.30–
0.15 0.030 0.030 0.50 4.0–6.0 0.50 0.44–0.65 - - -
0.60
16. SA 182 F9 0.30– 0.50– 8.0–
0.15 0.030 0.030 - 0.90–1.10 - - -
0.60 1.00 10.0
17. Nb-0.06–
0.10; Al
0.08– 0.30– 0.20– 0.18– 0.03–
SA 182 F91 0.020 0.010 8.0–9.5 0.40 0.85–1.05 0.02
0.12 0.60 0.50 0.25 0.07
Ti 0.01; Zr
0.01
18. SA 182 F304 18.0–
0.08 2.00 0.045 0.030 1.00 8.0-11.0 - - 0.10 -
20.0
19. SA 182 F304H 0.04– 18.0– 8.0–
2.00 0.045 0.030 1.00 - - - -
0.10 20.0 11.0[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 87
20. SA 182 F304L 18.0– 8.0–
0.030 2.00 0.045 0.030 1.00 - - 0.10 -
20.0 13.0
21. SA 182 F316 16.0- 10.0-
0.08 2.00 0.045 0.030 1.00 2.0-3.0 - 0.10 -
18.0 14.0
22. SA 182 F316H 16.0- 10.0-
0.04-0.10 2.00 0.045 0.030 1.00 2.0-3.0 - - -
18.0 14.0
23. SA 182 F316L 16.0- 10.0-
0.030 2.00 0.045 0.030 1.00 2.0-3.0 - 0.10 -
18.0 15.0
24. SA 182 F321 17.0-
0.08 2.00 0.045 0.030 1.00 9.0-12.0 - - - J
19.0
25. SA 182 F321H 17.0-
0.04-0.10 2.00 0.045 0.030 1.00 9.0-12.0 - - - K
19.0
26. SA 182 F347H 0.04– 17.0– 9.0–
2.00 0.045 0.030 1.00 - - - M
0.10 20.0 13.0
27. SA 234 WPB- 0.29–
0.30 0.050 0.058 0.10 य यून. 0.40 0.40 0.15 0.08 - -
Note 2 1.06
28. SA 234 WPC 0.29–
0.35 0.050 0.058 0.10 य यून. 0.40 0.40 0.15 0.08 - -
1.06
29. SA 234 WP11 Cl 0.05– 0.30– 0.50– 1.00–
0.030 0.030 - 0.44–0.65 - - -
1 0.15 0.60 1.00 1.50
30. SA 234 WP12 Cl 0.05– 0.30– 0.80–
0.045 0.045 0.60 - 0.44–0.65 - - -
1 0.20 0.80 1.25
31. SA 234 WP22 Cl 0.05– 0.30– 1.90–
0.040 0.040 0.50 - 0.87–1.13 - - -
1 0.15 0.60 2.60
32. SA 234 WP5 Cl1 0.15 0.30– 0.040 0.030 0.50 4.0–6.0 - 0.44–0.65 - - -88 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
0.60
33. SA 234 WP9 Cl1 0.30– 8.0–
0.15 0.030 0.030 1.00 - 0.90–1.10 - - -
0.60 10.0
34. SA 234 WP91 0.08– 0.30– 0.20–
0.020 0.010 8.0–9.5 - 0.85–1.05 - - -
0.12 0.60 0.50
35. SA 336 F11 Cl 1 0.05– 0.30– 0.50– 1.00–
0.025 0.025 - 0.44–0.65 - - -
0.15 0.60 1.00 1.50
36. SA 336 F11 Cl 0.10– 0.30– 0.50– 1.00–
0.025 0.025 - 0.45–0.65 - - -
2,3 0.20 0.80 1.00 1.50
37. SA 336 F12 0.10– 0.30– 0.10– 0.80–
0.025 0.025 - 0.45–0.65 - - -
0.20 0.80 0.60 1.10
38. SA 336 F5 0.30–
0.15 0.025 0.025 0.50 4.0–6.0 0.50 0.45–0.65 - - -
0.60
39. SA 336 F9 0.30– 0.50– 8.0–
0.15 0.025 0.025 - 0.90–1.10 - - -
0.60 1.00 10.0
40. SA 336 F91 Nb-0.06–
0.10; Al-
0.08– 0.30– 0.20– 0.18– 0.03–
0.025 0.025 8.0–9.5 0.40 0.85–1.05 0.02
0.12 0.60 0.50 0.25 0.07
Ti-0.01; Zr-
0.01
41. SB 564 N06617 0.05-0.15 1.0 - 0.015 1.0 20.0- 44.5 8.0-10.0 - - Co:10.0-
SB 166 N06617 24.0 य यून. 15.0; Fe:3.0;
Al: 0.8-1.5;
Cu:0.5;
Ti:0.6;
B:0.006[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 89
नोट: 1. अवधकतम जब एकल मान विवनवदयष् ट हो।
2. SA 234 WPB के वलए, बार अथिा प्ल ेट से बनाई गई वफवटोंग् स में अवधकतम 0.35 काबयन हो सकता है।
3. SA 234 WPB और SA 234 WPC वफवटोंग् स के वलए:
(i) कॉपर, वनवकल, हृोवमयम, मॉवलब् डेनम और िैनेवडयम का योग 1.00 प्रवतशत से अवधक नही ोंहोगा।
(ii) फ़ोवजिंग से बनाई वफवटोंग् स में अवधकतम 0.35 काबयन और अवधकतम 0.35 वसवलकॉन होगा और इनकी कोई य यूनतम सीमा नही ों
है।
(iii) वनधायररत अवधकतम काबयन से नीचे प्रत्य ेक बार 0.01 प्रवतशत की कमी के वलए, वनधायररत अवधकतम सीमा से ऊपर 0.06 प्रवतशत
मैग् नीज में िृक्तद् की अनुमवत होगी वजसकी अवधकतम सीमा 1.65 प्रवतशत है।
4. SA 350 LF1, LF2 और SA 105 फॉवजिंग् स के वलए
(i) हृोवमयम और मॉवलब् डेनम का योग 0.32 प्रवतशत से अवधक नही ोंहोगा।
(ii) कॉपर, वनवकल, हृोवमयम, मॉवलब् डेनम और िैनेवडयम का योग 1.00% से अवधक नही ोंहोगा।
5. J ग्रेड F 321 में टाइटेवनयम का अोंश काबयन अोंश के पाोंच गुना से कम नही ोंहोगा और यह 0.70 प्रवतशत से अवधक नही ोंहोगा।
K ग्रेड F 321H टाइटेवनयम का अोंश काबयन अोंश के चार गुना से कम नही ोंहोगा और यह 0.70 प्रवतशत से अवधक नही ोंहोगा।
M ग्रेड F 347H कोलोंवबयम का अोंश काबयन अोंश के आठ गुना से कम नही ोंहोगा और यह 1.10 प्रवतशत से अवधक नही ोंहोगा।90 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) ताप प्रवहृया सोंगत सामग्री विवशष् टताओ ों के अनुसार होगी।
(4) जहाों मशीवनोंग नही ों की जाती ऐसे पाइपो ों की इस प्रकार की सतह होनी चावहए जैसे सामाय य रूप से
रोवलोंग, फ़ोवजिंग अथिा डरॉइोंग द्वारा प्राप् त की जाती है।
बशते की य यूनतम अपेवित मोटाई को बनाये रखा जाये, तो सतह की छोटी कवमयो ों को स् िीकार
वकया जा सकता है और अय य कवमयो ों को याोंविक साधनो ों द्वारा दूर वकया जाता है तावक वचकनी सतह
प्राप्त की जा सके । वनरीिण प्रावधकारी के अनुमोदन से वसफय िेक्तल् डोंग द्वारा सतह की कवमयो ों की भी
मरम् मत की जा सकती है बशते वक जहाों आिश् यक हो िेक्तल् डोंग के पश् चात उन वहस् सो ोंको तनाि से मु् त
वकया गया हो।
59. परीिण वह सो ंका चयन- (1) परीिण के वलए या तो उसके वहस् सो ों का उपयोग वकया जाएगा अथिा
अवतरर् त सामग्री या पयायप् त आकार के परीिण वहस् से उपलब् ध कराये जाएोंगे। हेडर के मामले में उदाहरण
के वलए परीिण ररोंग के सरप् लस वहस् सो ों का उपयोग वकया जा सकता है। डाई में स् िैग वकये गये फ्लैंग् स के
मामले में बचे हुए पोंवचोंग का उपयोग परीिण वहस् सो ों के रूप में वकया जा सकता है, वजस मामले में पोंवचोंग
की सामग्री की पहचान पयायप् त रूप से उस फ्लैंग से की जाएगी। यह परीिण अधय-तैयार सामग्री पर भी
वकया जा सकता है उदाहरण के वलए वकसी बार अथिा वबलट पर बशते वक तैयार फ़ोवजिंग की भाोंवत इसका
भी लगभग समान रूप से अपचयन हुआ हो और ताप प्रवहृया से गुजरा हो। बोंद वसरे िाले हेडर के वलए
वडवशोंग या ररड्यूवसोंग से पहले परीिण ररोंग को काटा जाएगा और ये हेडर के समान उसी ताप प्रवहृया के
अधीन वकया जाएगा। ऐसे हेडर के मामले में वजय हें विशे किर से बोंद वकया गया है, परीिण ररोंग को ताप
प्रवहृया के बाद काटा जाएगा। इसी तरह की प्रवहृया अय य फ़ोवजिंग के परीिण वहस् सो ोंके वलए की जाएगी।
(2) परीिण के वलए, एक तथा समान कास् ट के वहस् से जो उसी ताप प्रवहृया बैच के हो ोंऔर इसके साथ-साथ
समान पररमाप के हो ों उय हें एक समूह में रखा जा सकता है तथा प्रत् येक समूह से कम से कम एक परीिण
वहस् सा वलया जाएगा।
(3) प्रासोंवगक परीिण वहस् सो ों का उपयोग जहाों व् यिहायय हो, हेडर के वलए वकया जाएगा। 200 वममी से कम
बाहरी व् यास िाले हेडर के वलए लोंबित परीिण वहस् सो ोंकी अनुमवत है।
60. त् यता िमता- (i) सामग्री की तय यता िमता इस उप-वनयमन की तावलका 2/36 के अनुसार याोंविक
गुणो ोंके अनुरूप होगी।
तावलका 2/36
हृम सं. ग्रेड यांवत्रक गुण (् यूनतम, जब एकल मान विवनवदषष् ट हो)
TS YS जी एल पर
एमपीए (वकग्रा/वममी) एमपीए प्रवतशत
(वकग्रा/वममी) दीघीकरण = 50
mm ् यून.*.
(1) (2) (3) (4) (5)
1. SA 266 Gr1 415-585 (42.3–59.6) 205 (21) 23
2. SA 266 Gr2 485–655 (49.5–66.8) 250 (25.5) 20[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 91
3. SA 266 Gr3 515–690 (52.5–70.4) 260 (26.5) 19
4. SA 350 LF1 415-585 (42.3–59.6) 205 (21) 25
5. SA 350 LF2 485-655 (49.5-66.8) 250 (25.5) 22
6. SA 105 485 (49.5) 250 (25.5) 30
7. SA 182 F1 485 (49.5) 275 (28) 20
8. SA 182 F2 485 (49.5) 275 (28) 20
9. SA 182 F11 Cl 1 415 (42.3) 205 (21) 20
10. SA 182 F11 Cl 2 485 (49.5) 275 (28) 20
11. SA 182 F11 Cl 3 515 (52.5) 310 (31.6) 20
12. SA 182 F12 Cl 1 415 (42.3) 220 (22.4) 20
13. SA 182 F12 Cl 2 485 (49.5) 275 (28) 20
14. SA 182 F22 Cl 1 415 (42.3) 205 (21) 20
15. SA 182 F22 Cl 3 515 (52.5) 310 (31.6) 20
16. SA 182 F5 485 (49.5) 275 (28) 20
17. SA 182 F9 585 (59.6) 380 (38.7) 20
18. SA 182 F91 620 (63.2) 415 (42.3) 20
19. SA 182 F304 515 (52.5) 205 (21) 30
20. SA 182 F304H 515 (52.5) 205 (21) 30
21. SA 182 F304L 485 (49.5) 170 (17.3) 30
22. SA 182 F316 515 (52.5) 205 (21) 30
23. SA 182 F316H 515 (52.5) 205 (21) 30
24. SA 182 F316L 485 (49.5) 170 (17.3) 30
25. SA 182 F321 515 (52.5) 205 (21) 30
26. SA 234 WPB 415 (42.3) 240 (24.5) 22
27. SA 234 WPC 485 (49.5) 275 (28) 22
28. SA 182 F321H 515 (52.5) 205 (21) 30
29. SA 182 F347H 515 (52.5) 205 (21) 30
30. SA 234 WP11 Cl 1 415-585 (42.3–59.6) 205 (21) 22
31. SA 234 WP12 Cl 1 415-585 (42.3–59.6) 220 (22.4) 22
32. SA 234 WP22 Cl 1 415-585 (42.3–59.6) 205 (21) 22
33. SA 234 WP5 Cl1 415-585 (42.3–59.6) 205 (21) 22
34. SA 234 WP9 Cl1 415-585 (42.3–59.6) 205 (21) 22
35. SA 234 WP91 585–760 (59.6–77.5) 415 (42.3) 20
36. SA 336 F11 Cl 1 415-585 (42.3–59.6) 205 (21) 20
37. SA 336 F11 Cl 2 485–660 (49.5–67.3) 275 (28) 20
38. SA 336 F11 Cl 3 515–690 (52.5–70.4) 310 (31.6) 18
39. SA 336 F12 485–660 (49.5–67.3) 275 (28) 20
40. SA 336 F5 415-585 (42.3–59.6) 250 (25.5) 20
41. SA 336 F9 585–760 (60.7–77.5) 380 (38.7) 20
42. SA 336 F91 620–760 (63.2–77.5) 415 (42.3) 20
43. SB 564 N06617 655 (66.8) 241 (24.6) 35
SB 166 N06617
* तय यता परीिण नमूना सोंगत सामग्री विवशष् टताओ ों के अनुरूप होगा।92 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) सामाय य तापमान पर अपर यील् ड प् िाइोंट, सामाय य तापमान पर विवनवदयष् ट य यूनतम तय यता िमता के
50 प्रवतशत से कम नही ोंहोना चावहए।
(3) सामग्री के िवधयत तापमान (Et) के 0.2 प्रवतशत के साक्ष् य सीमा के तनाि के य यूनतम मूल् य का
पररकलन, विवनयम 37 के अोंतगयत तावलका 2/5 में वदये गये अनुपात E/R के मूल् य द्वारा सामायय
t 20
तापमान (R ) पर य यूनतम वनधायररत तय यता िमता से गुणा करके प्राप्त वकया जाता है।
20
61. बेंड परीिण- (1) बेंड परीिण वहस् से 25 वममी चौड़े और 19 वममी मोटे आकार में मशीवनोंग से तैयार
चौकोर खोंड होगों े। इनके वकनारो ों को 1.6 वममी विज् या के रूप में गोल वकया जाएगा। परीिण वहस् सो ों को
पतले खोंड की ओर से मोड़ा जाएगा।
(2) परीिण वहस् सो ोंको उनके ठोंडा होने पर 180 वडग्री के कोण पर वबना कोई दरार आए मोड़ा जाएगा,
25 वममी चौड़े और 19 वममी मोटे परीिण वहस् सो ों के वलए बेंड की आोंतररक विज् या तावलका 2/37 में
विवनवदयवष्ट सत मािा से अवधक नही ोंहोनी चावहए।
तावलका 2/37
हृम सं. फोवजिंग का ग्रेड बेंड की आंतररक वत्रज्या (वममी)
(1) (2) (3)
1. M1 समूह 1 & 2 M3 समूह 1 & 2, M4 समूह1 6.35
2. M5A समूह1, M5B समूह1, M15E समूह1 & 1.5 x परीिण नमूने की मोटाई
M8 समूह 1 & 2
3. M43 वकसी परीिण की आिश्यकता नही ोंहै
िैकक्तल् पक रूप से, बेंड परीिण के वलए नमूना तैयार करना, परीिण पद्वत और स् िीकाययता
मानदोंड सोंगत सामग्री विवशष् टताओ ोंके अनुरूप होगों े।
62. अि ीकार करने से पूिष अवतरर त परीिण- (1) यवद तन्यता अथिा बेंड परीिण में से कोई भी
असफल रहता है तो वजसमें िे असफल हुए थे उसी प्रकार के दो अन्य परीिण उसी फोवजिंग के परीिण
वहस् सो ोंपर वकया जाएगा। यवद वकये गये पुन: परीिण का पररणाम सोंतो जनक पाया जाता है तो फ़ोवजिंग को
स्ि ीकार कर वलया जाएगा बशते वक अय य सोंदभय में स् टील फ़ोवजिंग के वलए ऊपर वनधायररत शतों को िे पूरा
करते हो।ों यवद इन पुन: परीिणो ों से सोंतो जनक पररणाम प्राप्त नही ोंहोता है तो इन फॉवजिंग् स को परीिण
ब् लॉक के शे वहस् से के साथ पुन: ताप प्रवहृया से गुजारा जाएगा और वफर से परीिण के वलए प्रस् तुत वकया
जाएगा।
(2) ऐसे सभी मामलो ों में वजनमें पुन: परीिण का सोंतो जनक पररणाम नही ों आता है, असफल रहने िाले
परीिण वहस् सो ोंके प्रवतवनवधत् ि िाले फ़ोवजिंग को अस् िीकार कर वदया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 93
भाग-VII
63. सामा्य ग्रे आयरन काल्पट ंग् स (ग्रेड ए)- (1) काक्तस् टोंग को वकसी लौह अयस् क स् मैक्तल् टोंग फनेस के
अलािा वकसी ऐसे मैटालवजयकल सोंयि में वपघलाये अथिा पररशोवधत की गई धातु से कास् ट वकया जाएगा,
वजस फनेस के उपयोग के वलए वनरीिण प्रावधकारी से वलक्तखत अनुमवत अिश् य प्राप् त की गई हो।
(2) कास् ट के रूप में लोहे के सोंगठन के सोंबोंध में विवनमायता का वििेकावधकार होगा लेवकन फास् फोरस
अथिा सल् फर अथिा दोनो ों के अवधकतम प्रवतशत का वनधायरण वनरीिण प्रावधकारी द्वारा वकया जा
सकता है, यवद िह ऐसा चाहे।
(3) काक्तस् टोंग को यथावनधायररत अिर, अोंक अथिा वच् के साथ वनरीिण प्रावधकारी द्वारा वदये गये पैटनय
अथिा कायायत् मक डराइोंग के अनुरूप सटीक रूप से मोल् ड वकया जाएगा और डराइोंग में विवनयम में
वनधायररत िहन िमता शावमल होगी।
(4) (क) काक्तस् टोंग सख् त, वकसी भी मोड़ से मु् त और ब् लो होल सोंबोंधी कमी तथा सभी सतही और अय य
कवमयो ोंसे मु् त होगा।
(ख) िे पूरी तरह से डरेस् ड अथिा फै टल् ड होगों े और सामाय य पद्वतयो ोंद्वारा मशीवनोंग वकये जाने योग् य
होगों े।
64. परीिण बार का प्रािधान- (1) परीिण से पूिय, वनरीिण प्रावधकारी यह उल् लेख करेगा वक ् या उसे
तय यता अथिा अनुप्रस् थ परीिण अथिा दोनो ों की आिश्य कता है और िह बार के कास् ट को भी विवनवदयष् ट
कर सकता है जहाों काक्तस् टोंग के वडजाइन और प्रचालन की पद्वत की अनुमवत है।
(2)(क) जब परीिण बार को अलग से कास् ट वकया जाता है उय हें एक ही समय पर और एक ही लैडल से
डाला जाएगा अथिा िही धातु होगी वजसका काक्तस् टोंग प्रवतवनवधत् ि करता है।
(ख) विवनयम 69 में विवनवदयष् ट परीिण की सोंख् या प्रत्य ेक मैल् ट की सभी काक्तस् टोंग पर लागू होगी।
(3) जब बार की काक्तस् टोंग की जाएगी तो काक्तस् टोंग के मोल् ड और परीिण वहस् से के वलए मोल् ड को इस प्रकार
जोड़ा जाएगा वक तरल धातु एक ही बार में दोनो ोंमोल् ड को भरे।
(4) सभी परीिण बार को उस काक्तस् टोंग के अनुसार वजसका िे प्रवतवनवधत् ि कर रहे हैं ग्रीन सैंड अथिा डराई
सैंड अथिा मोल् ड में कास् ट वकया जाएगा जैसा वक काक्तस् टोंग को हृमश: ग्रीन सैंड अथिा लोम अथिा डराई
सैंड में वकया गया हो।
(5) मोल्ड से वनकालने के बाद परीिण बार को वकसी ताप प्रवहृया से नही ोंगुजारा जाएगा।
65. परीिण बार का पररमाप- (1) (क) प्रस् तुत काक्तस् टोंग के मुख् य अनुप्रस् थ काट की मोटाई के अनुसार
वनरीिण प्रावधकारी द्वारा विवनवदयष् ट व् यास के अनुप्रस् थ परीिण बार वनम् नवलक्तखत पररमाप का अनुपालन
करेंगे, अथायत:-94 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 2/38
हृम सों. परीिण बार का व् यास की सीमा कुल लोंबाई प्रस् तुत काक्तस् टोंग के मुख् य
व् यास अनुप्रस् थ काट की मोटाई
(1) (2) (3) (4) (5)
1. वममी वममी वममी वममी
2. 15 + 1 254 10 तक
3. 22 + 1.7 381 10 से अवधक और 19 तक
4. 30 + 2 533 19 से अवधक और 28 तक
5. 40 + 2.5 533 28 से अवधक और 41 तक
6. 53 + 2.5 685 41 से अवधक
(ख) ऊपर दी गई सीमा से अवधक आकार के बार कास् ट को वनधायररत सीमा के व् यास तक मशीन वकया जा
सकता है।
(ग) अनुप्रस् थ परीिण करने से पूिय भी व् यास की दी गई सीमा तक बार कास् ट को मशीन वकया जा सकता है
बशते वक अोंवतम रूप से तैयार व् यास दी गई सीमा के भीतर हो।
(2) वनरीिण प्रावधकारी द्वारा विवनवदयष् ट व् यास के तय यता परीिण बार, प्रस् तुत काक्तस् टोंग के मुख् य अनुप्रस् थ
काट की मोटाई के अनुसार तावलका 2/39 में दशायये पररमाप के अनुसार होगों े। बार का परीिण या
तो प् लेन अथिा स् हृू ड छोर से वकया जा सकता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 95
तावलका 2/39
हृम सों. कास् ट के गैज िेिफ य यूनतम य यून प् लेन स् हृूड वसरा लगभग य यूनतम प्रस् तुत काक्तस् टोंग के मुख् य
रूप में का ल समानाोंतर तम वसरे की योग अनुप्रस् थ काट की मोटाई
व् यास व् यास लोंबाई वि य यूनतम
ज् या लोंबाई
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
1. B D A P R C E F LP LS
2. वममी वममी िगय वममी वममी वममी वममी वममी वममी वममी वममी
वममी
3. 15 10 80 25 38 38 13 S.P. 14 114 3 10 तक
14 S.F.
14 S.W
4. 22 14 161 50 89 38 19 S.F. 19 179 37 10 से अवधक और 19
22 S.W. तक
5. 30 20 322 50 89 50 38 S.F. 38 210 149 19 से अवधक और 38
38 S.W तक
6. 41 29 645 50 89 63 38 S.F 38 229 184 38 से अवधक और 41
38 S.W. 184 तक
7. 53 41 1290 50 89 89 50 S.F 51 286 210 41 से अवधक
परीिण बार को कॉलम बी में वदये व् यास के समानाोंतर बार के रूप में कास् ट वकया जाएगा और तावलका 2/39 में वदये गये C और P के पररमाप के
अनुसार मशीन वकया जाएगा।96 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 2/1
(3) विवनमायता और वनरीिण प्रावधकारी के बीच सहमवत से 51 वममी से अवधक मोटाई िाली
काक्तस् टोंग के वलए 53 वममी से अवधक व् यास के परीिण बार का उपयोग वकया जा सकता है।
वचि और तावलका के वलए इस विवनयम के उप-विवनयम (2) के वचि 2/1 और तावलका 2/39
को देखें।
66. यांवत्रक परीिण- (1) काक्तस् टोंग को विवनयम 67 और 68 विवनवदयष् ट अनुप्रस् थ और तय यता परीिण
का अनुपालन करना चावहए।
(2) सभी परीिण वहस् सो ों का चयन सिम व् यक्त् त द्वारा वकया जाएगा और उसकी सोंतुक्तष् ट के अनुसार
परीिण वकया जाएगा।
67. अनुप्रथ परीिण- विवनयम 65 के उप-वनयमन (1) के अनुसार अनुप्रस् थ परीिण बार कास् ट को
जब तावलका 2/40 के कॉलम 2 में दशाययी गई दूरी पर क्तस् थत सपोटय पर रखा जाए तो उय हें मध् य में कम
से कम कॉलम 3 में दशायये गये लोड को िहन करना चावहए और टूटने से पूिय कम से कम कॉलम 4 में
वदया गया वडफ्ले् शन दशायना चावहए।
(2) सपोटय और लोड रखने के वबोंदु की विज् या की सटीकता 3 वममी से कम नही ोंहोनी चावहए।
तावलका 2/40
हृम सों. परीिण बार का व् यास सपोटय के बीच ग्रेड A का य यूनतम ग्रेड A का य यूनतम
दूरी िेवकोंग लोड वडफ्ले् शन
(1) (2) (3) (4) (5)
1. वममी वममी वकग्रा वममी
2. 15 228 240 1.8
3. 22 305 538 2.5
4. 30 457 885 3.8
5. 40 457 1941 3
6. 53 610 3020 3.8[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 97
(3) कास् ट के रूप में अनुप्रस् थ परीिण बार का व् यास यवद विवनयम 65 के उप-विवनयम (1) में
विवनवदयष् ट सीमा के भीतर होता है तो, मानक व् यास के परीिण बार के वलए समकि िेवकों ग लोड की
गणना पररवशष् ट-ख मे वदये घटको ोंके अनुसार की जाएगी।
68. त् यता परीिण- विवनयम 65 के उप-विवनयम (2) में दशायये पररमाप तक मशीन वकये गये और
प् लेन अथिा स् हृू ड वसरो ों से परीिण वकये गये तय यता परीिण बार तावलका 2/41 में दशायए गए से कम
में टूटने की िमता प्रदवशयत नही ोंकरने चावहए:-
तावलका 2/41
हृम सों. परीिण बार का व् यास य यूनतम चरम तय यता तनाि- ग्रेड ए
(1) (2) (3)
1. वममी वकग्रा/वममी2
2. 15 17.5
3. 22 16.8
4. 30 15.5
5. 40 14.8
6. 53 14
नोट: एक्त् सअल लोवडोंग सुवनक्तश् चत करने के वलए सेल् फ-एलाइवनोंग वग्रप् स की वसफाररश की जाती है।
69. अनुप्रथ और त् यता परीिणो ं की सं् या- (1) काक्तस् टोंग के प्रत्य ेक बैच के वलए अपेवित
परीिणो ों की सोंख् या तावलका 2/42 के अनुसार होगी, इसके पश् चात काक्तस् टोंग के विवभय न िगों को 4
प्रवतवनवध समूहो ोंमें विभावजत वकया जाएगा।
(2) एक परीिण एक अनुप्रस् थ और एक तय यता परीिण का सोंदभय लेगा, चाहे उसे कास् ट के रूप में
एक अथिा दो परीिण बार से वलया गया हो।
तावलका 2/42
हृम समूह काल्पट ंग् स का भार परीिण अपेिाएं
सं.
(1) (2) (3) (4)
1. 1 13 वकग्रा तक काक्तस् टोंग अथिा उसके वहस् सो ों के प्रत्य ेक
1524 वकग्रा के वलए एक परीिण।
2. 2 13 वकग्रा से अवधक और 50 काक्तस् टोंग अथिा उसके वहस् सो ों के प्रत्य ेक
वकग्रा तक 1814 वकग्रा के वलए एक परीिण।
3. 3 50 वकग्रा से अवधक और 907 काक्तस् टोंग अथिा उसके वहस् सो ों के प्रत्य ेक
वकग्रा तक 3629 वकग्रा के वलए एक परीिण।
4. 4 907 से अवधक और ऐसे काक्तस् टोंग अथिा उसके वहस् सो ों के प्रत्य ेक
महत् िपूणय काक्तस् टोंग वजन पर 3629 वकग्रा अथिा 3629 वकग्रा या उससे
परस् पर सहमवत हो अवधक भार की प्रत्य ेक काक्तस् टोंग के वलए एक
परीिण।98 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
ऊपर वदये गये समूह 1, 2 और 3 में, एक परीिण के प्रवतवनवधत् ि िाले सभी काक्तस् टोंग को उसी
लैडल से वकया गया हो या उसी समान ताप प्रवहृया से गुजारा गया हो वजससे परीिण वकया गया हो।
70. अवतरर त परीिण- वकसी काक्तस् टोंग अथिा काक्तस् टोंग के बैच को यवद अस् िीकार वकया जाएगा तो
तावलका 2/43 के अनुसार वनम् नवलक्तखत अवतरर् त परीिण करने होगों े:
तावलका 2/43
हृम सों. परीिण पररणाम क्तस् थवतयाों
वहस् सा
(1) (2) (3) (4)
1. 1st यवद असफल रहता है दूसरे परीिण वहस् से की जाोंच की जाएगी।
2. 2nd यवद सफल रहता है प्रस् तुत बैच या अलग काक्तस् टोंग को स् िीकार वकया
जाएगा।
3. यवद असफल रहता है प्रस् तुत बैच या अलग काक्तस् टोंग को अस् िीकार
वकया जाएगा।
4. बशते वक दोनो ोंपरीिण वहस् सो ों के असफल रहने के मामले में, यवद उनमें से कोई भी स् पष् ट
दो दशायता है तो वनम्नानुसार अवतरर् त परीिण के वलए असफल काक्तस् टोंग से एक टुकड़ा
अथिा टूटी हुई काक्तस् टोंग से एक तीसरा परीिण वहस् सा वलया जा सकता है:
5. 3rd यवद सफल रहता है प्रस् तुत बैच या अलग काक्तस् टोंग को स् िीकार वकया
जाएगा।
6. यवद असफल रहता है प्रस् तुत बैच या अलग काक्तस् टोंग को अस् िीकार
वकया जाएगा।
भाग-VIII
71. शील् डेड मैटल आकष िेल्पल् डंग के वलए किडष इलैट रोड- (1) (क) (i) काबयन स् टील, लो एलॉय
स्ट ील, स्ट ेनलेस स् टील और नॉन फै रस सामवग्रयो ोंकी शील् डेड मैटल आकय िैक्तल् डोंग के वलए 2.0 वममी
और उससे अवधक आकार के व् यास िाले किडय इलै् टरोडटस पर यह विवनयम लागू होगों े।
(ii) 2.0 वममी से कम व् यास के इलै् टरोडटस बॉयलर में उपयोग नही ोंवकये जाएोंगे।
(ख) किडय इलै् टरोड इन विवनयमो ोंमें विवनवदयष् ट अपेिाओ ोंका अनुपालन करेंगे।
(ग) सामाय य कायय क्तस् थवतयो ोंमें विशे ताएों और व्य िहार इस प्रकार होगों े वक औसत कौशल और अनुभि
िाले िेल् डर द्वारा सोंतो जनक िेल् ड वडपोवजट वकया जा सके और वजसमें वनम् नवलक्तखत विशे ताएों हो,ों
अथायत-
(i) िेक्तल् डोंग के दौरान स् लैग और िेल् ड मैटल के वनयोंिण में आसानी हो
(ii) आकय अपेवित रूप से वटकाऊ हो
(iii) अनअपेवित रूप से कोई छीटों े न फै लें[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 99
(iv) जमाि की दर और पेवनटरेशन की गहराई अपेिा के अनुसार हो
(v) स् लैग को आसानी से हटाया जा सके
(vi) वकसी अनअपेवित अोंडर-कट की प्रिृवत्त न हो
(vii) िेल् ड वडपोवजट अपेवित रूपरेखा िाला हो तथा
(viii) िेल् ड मैटल की कम आोंतररक वछद्रता हो।
(2) किडय इलै् टरोडटस को वनम् नवलक्तखत श्रेवणयो ों में िगीकृ त वकए जाएोंगे और अमेररकन सोसायटी
ऑफ मेके वनकल इोंजीवनयसय (एएसएमई) भाग-IIसी की विवशष् टताओ ों या एडब्ल्यूएस (अमेररकन
िेक्तल्डोंग सोसाइटी) विवनदेशो ोंया समकि के वफलर एलॉय (एसएफए) के वलए लागू विवनदेशो ोंके
अनुसार वकए जाएोंगे:
(क) काबयन स् टील इलै् टरोडटस
(ख) लो एलॉय स् टील इलै् टरोडटस
(ग) स् टेनलेस स् टील इलै् टरोडटस
(घ) वनवकल और वनवकल एलॉय िेक्तल्डोंग इलै् टरोडटस
(3) किडय इलै् टरोडटस ऐसी वकसी पद्वत से बनाये जा सकते हैं वजससे िे उत् पाद इन विवनयमो ोंऔर
सोंगत वफलर अलॉय की विवशष्ट सताओ ों (एसएफए) अथिा अमेररकन िेक्तल्डोंग सोसायटी
(एडबल् यूएस) की विवशष् टता की अपेिाओ ों के अनुरूप हो।ों
(4) (क) किडय इलै् टरोडटस का सामाय य आकार कोर िायर के व् यास के अनुरूप होगा और इसकी
लोंबाई 450 वममी से अवधक नही ोंहोगी एिों वसरे पर वग्रवपोंग के वलए प्रािधान वकया जाएगा।
(ख) इलै् टरोडटस के कोर िायर के विवनवदयष् ट व् यास पर िहन िमता ± 0.05 वममी होगी।
(ग) इलै् टरोडटस की लोंबाई पर िहन िमता ±10 वममी होगी अथिा सोंगत वफलर अलॉय की
विवशष्ट सताओ ों (एसएफए) अथिा अमेररकन िेक्तल्डोंग सोसायटी (एडबल् यूएस) की विवशष् टता
में विवनवदयष् ट वकये अनुसार होगी।
(5) (क) कोर िायररोंग और किररोंग ऐसे वकसी दो से मु् त रहेंगे जो वक इलै् टरोड की समान
वडपोवजशन में बाधा उत् पय न कर सकती है।
(ख) फ्ल् स किररोंग पयायप् त रूप से मजबूत होगी वजससे िह वबना वकसी िवत के पररिहन,
भोंडारण, हैंडवलोंग और उपयोग की सामायय क्तस् थवतयो ों में बरकरार रहे और उसके सभी
वहस् सो ोंकी मोटाई समान रहे तावक उय हें एकसार रूप से जोड़ा जा सके ।
(ग) किररोंग कोर पर अवभकें वद्रत होगी तथा अवधकतम कोर और एक किररोंग के सोंबोंध में
अनुमत अोंतर य यूनतम कोर और एक किररोंग से नीचे वदये गये आोंकड़ो ों से अवधक नही ों
होगी।
(i) 2.5 वममी तक के व् यास के वलए माध् य पररमाप का 7%,
(ii) 3.2 से 4.0 वममी तक के व् यास के वलए माध् य पररमाप का 5% और
(iii) 5 वममी और उससे अवधक व् यास के वलए माध् य पररमाप का 4%100 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) इलै् टरोड िगीकरण का कम से कम एक इमवप्रोंट वग्रप एोंड के 65 वममी के भीतर किररोंग पर
इमवप्रोंट वकया जाएगा। यह इमवप्रोंट िेक्तल् डोंग से पहले और उसके पश् चात पाने योग् य रहना
चावहए।
(7) (क) किडय इलै् टरोडटस को पररिहन के दौरान िवत से सुरवित रखने के वलए उपयुि रूप से
पैक वकया जाएगा। जब स् टोर वकया जाये तो इलै् टरोडटस को एक शुष् क स् टोर रूप में उनके मूल
बोंडल अथिा पैवकों ग में रखा जाएगा और इस क्तस् थवत में रखा जाएगा वक इलै् टरोडटस विवनमायता
द्वारा वडस् पैच की तारीख को वजस प्रकार के पररणाम देने में सिम हैं उस क्तस् थवत में दो ि य की
अिवध अथिा इलै् टरोड विवनमायता द्वारा सोंस् तुत अिवध, जो भी कम हो, तक बने रहेंगे। इस
अिवध के पश् चात इलै् टरोडटस के उपयोग की अनुमवत विवशष् टताओ ों के अनुसार जाोंच परीिण
करने के बाद दी जाएगी बशते की इलै् टरोड विवनमायता द्वारा ऐसा करने का वन ेध न हो।
(ख) प्रत्य ेक पैके ज पर वनम् नवलक्तखत सूचना अोंवकत होनी चावहए-
(i) विवनमायता का नाम
(ii) इलै् टरोडटस का टरेड नेम/िाोंड नेम
(iii) इलै् टरोडटस का आकार और सोंख् या
(iv) विवनमायण का बैच नोंबर और तारीख
(v) सोंस् तुत ितयमान रेंज
(vi) एडबल् यूएस िगीकरण
(8) (क) इन इलै् टरोडटस को आरोंवभक परीिण और आिवधक जाोंच परीिण की शतय को पूरा
करना होगा तावक िे इन विवनयमो ोंकी अपेिाओ ोंको पूरा वकया जाना सुवनक्तश् चत करें।
(ख) इलै् टरोडटस वजय हें एक से अवधक प्रकार के करोंट अथिा पोलैररटी हेतु उपयोग वकया जाना है,
उनका परीिण प्रत्य ेक प्रकार के करोंट और पोलैररटी का प्रयोग करते हुए प्रत्येक प्रकार के
करोंट और पोलैररटी के वलए वकया जाएगा।
(ग) यवद कोई परीिण नमूना वकसी विशे परीिण की आिश् यकता को पूरा करने में असफल
रहता है तो उसी बैच के इलै् टरोडटस का उपयोग करते हुए दो अय य परीिण नमूने तैयार वकये
जाएोंगे और उसी परीिण के वलए प्रस् तुत वकये जाएोंगे।
(घ) इलै् टरोडटस के बैच को स् िीकार कर वलया जाएगा जैसे वक उय होनों े परीिण पास कर वलया हो
बशते वक दोनो ोंअवतरर् त नमूनो ोंके परीिण सोंतो जनक पाये जाते हैं।
(9) किडय इलै् टरोड के विवनमायता द्वारा प्रदान वकये गये परीिण प्रमाण-पि को विवशष् टता की
अपेिाओ ों को पूरा करना होगा। जब माोंगा जाएगा, विवनमायता आपूवतय वकये गये इलै् टरोडटस के वलए
वपछले 12 माह के भीतर वकये गये सबसे निीनतम आिवधक जाोंच परीिण के पररणाम प्रस् तुत
करेगा।
भाग-IX[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 101
72. गैस शील् डेड आकष िेल्पल् डंग के वलए रॉड स और इलैट रोड स- (1) (क) इन विवनयमो ोंमें प्रयु् त
काबयन स् टील, लो एलॉय स् टील, स् टेनलेस स् टील और नॉन फै रस सामवग्रयो ोंकी गैस शील्डेड आकय िैक्तल्डोंग
के वलए 0.8 वममी और उससे अवधक आकार के व्यास िाले इलैररोडटस और रॉडटस पर ये विवनयम
लागू होगों े।
(ख) रॉडटस और इलै् टरोडटस इन विवनयमो ों और एडबल् यूएस अथिा एसएफए विवशष् टताओ ों की लागू
अपेिाओ ोंका अनुपालन करेंगे।
(ग) सामायय कायय क्तस् थवतयो ोंमें उनकी विशे ताएों और व् यिहार इस प्रकार होगों े वक औसत कौशल और
अनुभि िाले िेल् डर द्वारा सोंतो जनक िेल् ड वडपोवजट वकया जा सके और वजसमें वनम् नवलक्तखत
विशे ताएों हो।ों
(घ) ये रॉडटस और इलै् टरोडटस मैनुअल, सेमी ऑटोमैवटक और मशीन िेक्तल् डोंग के वलए उवचत होने
चावहए।
(i) िेक्तल् डोंग के दौरान मोल् टेन पूल के वनयोंिण में आसानी हो
(ii) आकय अपेवित रूप से वटकाऊ हो
(iii) अनअपेवित रूप से कोई छीटों े न फै लें
(iv) जमाि की दर और पेवनटरेशन की गहराई अपेिा के अनुसार हो
(v) वकसी अनअपेवित अोंडर-कट की प्रिृवत्त न हो
(vi) िेल् ड वडपोवजट अपेवित रूपरेखा िाला हो और
(vii) िेल् ड मैटल की कम आोंतररक वछद्रता हो।
(2) इलै् टरोडटस और रॉडटस वनम् नानुसार चार श्रेवणयो ोंमें िगीकृ त वकये जाएोंगे, अथायत:-
(क) काबयन स् टील इलै् टरोडटस और रॉडटस
(ख) लो एलॉय स् टील इलै् टरोडटस और रॉडटस
(ग) स् टेनलेस स् टील इलै् टरोडटस और रॉडटस
(घ) वनवकल और वनवकल-एलॉय िेक्तल् डोंग इलै् टरोडटस और रॉडटस
(3) इलै् टरोडटस और रॉडटस ऐसी वकसी पद्वत से बनाये जा सकते हैं वजससे िे उत् पाद इन विवनयमो ों
और सोंगत वफलर अलॉय की विवशष्ट सताओ ों (एसएफए) अथिा अमेररकन िेक्तल्डोंग सोसायटी
(एडबल् यूएस) की विवशष् टता की अपेिाओ ों के अनुरूप हो।ों
(4) सीधी लोंबाई और कॉयल् स के वलए इलै् टरोडटस और रॉडटस का आकार और िहन िमता समुवचत
वफलर अलॉय की विवशष्ट सताओ ों (एसएफए) अथिा अमेररकन िेक्तल्डोंग सोसायटी (एडबल् यूएस) की
विवशष् टता की अपेिाओ ों के अनुरूप हो।ों
(5) (क) रॉडस और इलै् टरोडटस की वफवनवशोंग वचकनी होनी चावहए और ये स् लीिर, गड्ढे, स् हृै च, स् के ल,
सीम् स, लैप् स और बाहरी तत्ि ो ों से यथासोंभि मु् त होने चावहए तावक िेल् ड की गई धातु की
विशे ताओ ोंपर इनका प्रभाि न पड़े।
(ख) इलै् टरोड की पूरी लोंबाई में मुख् य सोंघटक एकरूप में वितररत होने चावहए तावक िेल् ड धातु की
विशे ताओ ोंकी वनरोंतरता सुवनक्तश् चत की जा सके ।102 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) (क)इलै् टरोडटस िाले कॉयल् स, स् पूल् स और डरम् स पर उपयु् त सूचना के साथ उवचत और सुरवित
रूप से टैग अथिा लेबल लगाये जाएोंगे।
(ख) रॉडटस पर वफलर अलॉय की विवशष्ट सताओ ों (एसएफए) अथिा अमेररकन िेक्तल्डोंग सोसायटी
(एडबल् यूएस) की विवशष् टता की पहचान के वलए कम से कम एक इमवप्रोंट होगा।
(7) (क) रॉडटस और इलै् टरोडटस को पररिहन के दौरान िवत से सुरवित रखने के वलए उपयुि रूप से
पैक वकया जाएगा।
(ख) प्रत्य ेक पैके ज पर उत् पाद की सूचना पठनीय रूप में दजय की जाएगी।
(8) प्रत्य ेक पैके ज पर वनम् नवलक्तखत सूचना दजय होनी चावहए, अथायतट;-
(क) विवनमायता का नाम;
(ख) इलै् टरोडटस का टरेड नेम/िाोंड नेम;
(ग) इलै् टरोडटस का आकार और सोंख् या;
(घ) लॉट, कों टरोल अथिा हीट नोंबर; और
(ङ) अमेररकन िे क्तल् डोंग सोसायटी (एडबल् यूएस) िगीकरण
(9) (क) इन इलै् टरोडटस और रॉडटस को आरोंवभक परीिण और आिवधक जाोंच परीिण की शतय को
पूरा करना होगा तावक िे इन विवनयमो ोंकी अपेिाओ ों को पूरा करना सुवनक्तश् चत वकया जा सके ।
(ख) इलै् टरोडटस और रॉडटस वजय हें एक से अवधक प्रकार के गैस हेतु उपयोग वकया जाना है, उनका
परीिण प्रत् येक प्रकार की गैस के वलए वकया जाएगा।
(ग) यवद कोई परीिण नमूना वकसी विशे परीिण की आिश् यकता को पूरा करने में असफल रहता
है, तो उसी बैच के इलै् टरोडटस का उपयोग करते हुए दो अय य परीिण नमूने तैयार वकये जाएोंगे और
उसी परीिण के वलए प्रस् तुत वकये जाएोंगे।
(घ) इलै् टरोडटस के बैच को स् िीकार कर वलया जाएगा जैसे वक उय होनों े परीिण पास कर वलया हो बशते
वक दोनो ोंअवतरर् त नमूनो ोंके परीिण सोंतो जनक पाये जाते हैं।
(10) (क) इलैकट टरोड और रॉडटस के विवनमायता द्वारा प्रदान वकये गये परीिण प्रमाण-पि को
विवशष् टता की अपेिाओ ों को पूरा करना होगा।
(ख) विवनमायता, जब उससे माोंग की जाएगी, आपूवतय वकये गये इलै् टरोडटस और रॉडटस के वलए
वपछले 12 माह के भीतर वकये गये सबसे निीनतम आिवधक जाोंच परीिण के पररणाम
प्रस् तुत करेगा।
भाग-X[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 103
73. फ्ल्ल् स कोडष आकष िेल्पल् डंग के वलए इलैट रोड स- (1)(क) यह विवनयम शीक्तल् डोंग गैस सवहत
अथिा उसके वबना फ्ल्ल्् स कोडय आकय िेक्तल् डोंग के वलए इलै् टरोडटस पर लागू होगों े।
(ख) इन विवनयमो ोंमें प्रयु् त काबयन स् टील, लो एलॉय स् टील, स् टेनलेस स् टील और नॉन फै रस सामवग्रयो ों
की फ्ल्ल्् स कोडय आकय िेक्तल् डोंग के वलए उपयु् त होने चावहए।
(ग) इलै् टरोडटस एडबल् यूएस अथिा एसएफए विवशष् टताओ ोंकी लागू अपेिाओ ोंका अनुपालन करेंगे।
(घ) सामाय य कायय क्तस् थवतयो ोंमें विशे ताएों और व्य िहार इस प्रकार होगों े वक औसत कौशल और अनुभि
िाले िेल् डर द्वारा सोंतो जनक िेल् ड वडपोवजट वकया जा सके और वजसमें वनम् नवलक्तखत विशे ताएों भी
हो।ों
(ङ) इलै् टरोडटस मैनुअल, सेमी ऑटोमैवटक और मशीन िेक्तल् डोंग के वलए वनम्न मापदोंडो ोंपर उपयुि
होने चावहए-
(i) िेक्तल् डोंग के दौरान मोल् टेन पूल के वनयोंिण में आसानी हो
(ii) आकय अपेवित रूप से वटकाऊ हो
(iii) अनअपेवित रूप से कोई छीटों े न फै लें
(iv) जमाि की दर और पेवनटरेशन की गहराई अपेिा के अनुसार हो
(v) वकसी अनअपेवित अोंडर-कट की प्रिृवत्त न हो
(vi) िेल् ड वडपोवजट अपेवित रूपरेखा िाला हो
(vii) िेल् ड मैटल की कम आोंतररक वछद्रता हो और
(viii) स् लैग हटाने का अपेवित स् तर
(2) इलै् टरोडटस वनम् नानुसार चार श्रेवणयो ोंमें िगीकृ त वकये जाएोंगे, अथायत:
(i) काबयन स् टील इलै् टरोडटस
(ii) लो एलॉय स् टील इलै् टरोडटस
(iii) स् टेनलेस स् टील इलै् टरोडटस; और
(iv) वनवकल और वनवकल एलॉय िेक्तल्डोंग इलै् टरोडटस
(3) इलै् टरोडटस ऐसी वकसी पद्वत से बनाये जा सकते हैं वजससे िे उत् पाद इन विवनयमो ों और सोंगत
एसएफए अथिा एडबल् यूएस विवशष् टता की अपेिाओ ों के अनुरूप हो।ों
(4) सीधी लोंबाई और कॉयल् स के वलए इलै् टरोडटस और रॉडटस का आकार और िहन िमता समुवचत
एसएफए अथिा एडबल् यूएस विवशष् टता के अनुरूप होगी।
(5) वफवनवशंग और एकरूपता:- इलै् टरोडटस की वफवनवशोंग वचकनी होनी चावहए और ये स् लीिर,
गड्ढे, स् हृै च, स् के ल, सीम् स, लैप् स और बाहरी तत्ि ो ों से यथासोंभि मु् त होने चावहए तावक िेलट ड की
गई धातु की विशे ताओ ों पर इनका प्रभाि न पड़े। इलै्ट रोड की पूरी लोंबाई में मुख् य सोंघटक
एकरूप में वितररत होने चावहए तावक िेल् ड धातु की विशे ताओ ों की वनरोंतरता सुवनक्तश् चत की जा
सके ।
(6) इलै् टरोडटस िाले कॉयल् स, स् पूल् स और डरम् स पर उपयु् त सूचना के साथ उवचत और सुरवित
रूप से टैग अथिा लेबल लगाये जाएोंगे।
(7) (क) इलै् टरोडटस को पररिहन के दौरान िवत से सुरवित रखने के वलए उपयुि रूप से पैक
वकया जाएगा और प्रत् येक पैके ज पर उत् पाद की सूचना पठनीय रूप में दजय की जाएगी।
(ख) प्रत्य ेक पैके ज पर वनम् नवलक्तखत सूचना दजय होनी चावहए, अथायत:-
i. विवनमायता का नाम104 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
ii. इलै् टरोडटस का टरेड नेम/िाोंड नेम
iii. इलै् टरोडटस का आकार और सोंख् या
iv. लॉट, कों टरोल अथिा हीट नोंबर; और
v. अमेररकन िेक्तल्डोंग सोसायटी (एडबल् यूएस) िगीकरण
(8) (क) इन इलै् टरोडटस को आरोंवभक परीिण और आिवधक जाोंच परीिण की शतय को पूरा
करना होगा तावक िे इन विवनयमो ोंकी अपेिाओ ोंको पूरा वकया जाना सुवनक्तश् चत करें।
(ख) यवद कोई परीिण नमूना वकसी विशे परीिण की आिश् यकता को पूरा करने में असफल
रहता है तो उसी बैच के इलै् टरोडटस का उपयोग करते हुए दो अय य परीिण नमूने तैयार वकये
जाएोंगे और उसी परीिण के वलए प्रस् तुत वकये जाएोंगे।
(ग) इलै् टरोडटस के बैच को स् िीकार कर वलया जाएगा जैसे वक उय होनों े परीिण पास कर वलया
हो बशते वक दोनो ोंअवतरर् त नमूनो ोंके परीिण सोंतो जनक पाये जाते हैं।
(9) (क) इलै् टरोडटस के विवनमायता द्वारा प्रदान वकये गये परीिण प्रमाण-पि को विवशष्ट ता की
अपेिाओ ोंको पूरा करना होगा।
(ख) विवनमायता से जब माोंग की जाएगी, आपूवतय वकये गये इलै् टरोडटस के वलए वपछले 12 माह
के भीतर वकये गये सबसे निीनतम आिवधक जाोंच परीिण के पररणाम प्रस् तुत करेगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 105
भाग-XI
74. सबमर्जड ष आकष िेल्पल् डंग के वलए इलैट रोड स और फ्ल्ल् स - (1) (क) ये विवनयम सबमज् डय आकय
िेक्तल् डोंग प्रवहृया के वलए इलै् टरोडटस और फ्ल्ल् ् स पर लागू होगों े।
(ख) इन विवनयमो ोंमें इलै् टरोडटस और फ्ल्ल् ् स कॉक्तम् बनेशन काबयन स् टील, लो एलॉय स् टील और वनवकल
एलॉय की सबमज् डय आकय िेक्तल् डोंग के वलए उपयु् त होने चावहए।
(ग) इलै् टरोडटस और फ्ल्ल् ् स कॉक्तम् बनेशन एडबल् यूएस अथिा एसएफए विवशष् टताओ ोंकी लागू अपेिाओ ों
का अनुपालन करेंगे।
(घ) िायर फ्ल्ल्् स कॉक्तम् बनेशन डीसी अथिा एसी करोंट का उपयोग करते हुए मल् टी रन और वसोंगल रन
तकनीक के वलए उपयु् त होने चावहए और इनके द्वारा अपेवित भौवतक और मैटलवजयकल विशे ताओ ों
िाले िेल् ड का उत् पादन करना चावहए।
(ङ) इलै् टरोड फ्ल्ल्् स कॉक्तम् बनेशन को चाहे सेमी ऑटोमैवटक अथिा मशनी िेक्तल् डोंग प्रवहृया के वलए
उपयु् त होना चावहए।
(च) सामाय य कायय क्तस् थवतयो ों में फ्ल्ल्् स इलै् टरोड कॉक्तम्ब नेशन की विशे ताएों और व् यिहार इस प्रकार
होगों े वक औसत कौशल और अनुभि िाले िेल् डर द्वारा सोंतो जनक िेल् ड वडपोवजट वकया जा सके और
वजसमें वनम् नवलक्तखत विशे ताएों हो,ों अथायत:-
(i) जमाि की दर और पेवनटरेशन की गहराई अपेिा के अनुसार हो
(ii) वकसी अनअपेवित अोंडर-कट की प्रिृवत्त न हो
(iii) िेल् ड वडपोवजट अपेवित रूपरेखा िाला हो
(iv) िेल् ड मैटल की कम आोंतररक वछद्रता हो और
(v) स् लैग हटाने का अपेवित स् तर हो
(2) इलै् टरोडटस वनम् नानुसार तीन श्रेवणयो ोंमें िगीकृ त वकये जाएोंगे:-
(क) उपयु् त फ्ल्ल्् स के साथ काबयन स् टील इलै् टरोडटस
(ख) उपयु् त फ्ल्ल्् स के साथ लो-एलॉय स् टील इलै् टरोडटस और
(ग) उपयु् त फ्ल्ल्् स के साथ वनवकल एलॉय इलै् टरोडटस
(3) (क) इलै् टरोडटस ऐसी वकसी पद्वत से बनाये जा सकते हैं वजससे िे उत् पाद इन विवनयमो ों और
सोंगत एसएफए अथिा एडबल् यूएस विवशष् टता की अपेिाओ ोंके अनुरूप हो।ों
(ख) फ्ल्ल्् स के विवनमायण की पद्वत फ्यूज् ड, एग् लोमरेटेड और वम् स् ड होगी एिों फ्ल्ल्् स के
विवनमायण के वलए हृश् ड स् लैग अथिा री-हृश् ड फ्ल्ल्् स का उपयोग नही ोंवकया जाएगा।
(4) (क) इलै् टरोडटस का आकार और िहन िमता समुवचत एसएफए अथिा एडबल् यूएस
विवशष् टता के अनुरूप होगी।
(ख) फ्ल्ल्् स स् मूथ फीवडोंग के वलए ग्रैय यूलर होने चावहए और इसकी उवचत शीक्तल् डोंग सुवनक्तश् चत
की जानी चावहए। पावटयकल के आकार का वितरण समान और वनरोंतर होना चावहए।106 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) (क) इलै् टरोडटस की वफवनवशोंग वचकनी होनी चावहए और ये स् लीिर, गड्ढे, स् हृै च, स् के ल, सीम् स,
लैप् स और बाहरी तत्ि ो ोंसे यथासोंभि मु् त होने चावहए।
(ख) िेल् ड की गई धातु की विशे ताओ ोंपर इनका प्रभाि नही ोंपड़ना चावहए।
(ग) इलै् टरोड की पूरी लोंबाई में मुख् य सोंघटक एकरूप में वितररत होने चावहए तावक िेल् ड धातु
की विशे ताओ ोंकी वनरोंतरता सुवनक्तश् चत की जा सके ।
(6) (क) इलै् टरोडटस िाले कॉयल् स, स् पूल् स और डरम् स पर उपयु् त सूचना के साथ उवचत और
सुरवित रूप से टैग अथिा लेबल लगाये जाएोंगे।
(ख) फ्ल्ल्् स िाले बैग् स पर उवचत पहचान दजय होनी चावहए।
(7) (क) इलै् टरोडटस और फ्ल्ल्् स को पररिहन के दौरान िवत से सुरवित रखने के वलए समुवचत
रूप से पैक वकया जाएगा। प्रत्य ेक पैके ज पर उत् पाद की सूचना पठनीय रूप में दजय की
जाएगी।
(ख) प्रत्य ेक पैके ज पर वनम् नवलक्तखत सूचना दजय होनी चावहए, अथायत:-
(i) विवनमायता का नाम
(ii) इलै् टरोडटस अथिा फ्ल्ल् ् स का टरेड नेम / िाोंड नेम
(iii) इलै् टरोडटस अथिा फ्ल्ल् ् स का आकार और सोंख् या
(iv) लॉट, कों टरोल अथिा हीट नोंबर और
(v) अमेररकन िेक्तल्डोंग सोसायटी (एडबल् यूएस) िगीकरण
(8) (क) इन इलै् टरोडटस और फ्ल्ल्् स को आरोंवभक परीिण और आिवधक जाोंच परीिण की शतय
को पूरा करना होगा तावक िे इन विवनयमो ोंकी अपेिाओ ोंको पूरा वकया जाना सुवनक्तश् चत करें।
(ख) यवद कोई परीिण नमूना वकसी विशे परीिण की आिश् यकता को पूरा करने में असफल
रहता है तो दो अय य परीिण नमूने वलये जाएोंगे और उसी परीिण के वलए प्रस् तुत वकये जाएोंगे।
(ग) इलै् टरोडटस के बैच को स् िीकार कर वलया जाएगा जैसे वक उय होनों े परीिण पास कर वलया
हो बशते वक दोनो ोंअवतरर् त नमूनो ोंके परीिण सोंतो जनक पाये जाते हैं।
(9) (क) इलैररोड और फ्लक्स के विवनमायता द्वारा प्रदान वकए गए परीिण प्रमाणपि विवशष्ट सता की
अपेिाओ ोंको पूरा करेगा।
(ख) विवनमायताओ ों से जब माोंग की जाएगी, आपूवतय वकये गये इलैररोड अथिा फ्लक्स आपूवतय के
वलए वपछले 12 माह के भीतर वकये गये सबसे निीनतम आिवधक जाोंच परीिण के पररणाम
प्रस् तुत करेगा।
75. (1) इलैररोड के प्रत्येक िान्ड् के शुरूआती परीिण, विवनयमो ोंऔर उवचत एडब्लयूएस अथिा
एसएफए विवनदेश के अनुसार वकए जाएोंगे।
(2) (क) ऑल िेल्ड-धातु तन्यता परीिण नमूने तैयार वकए जाएोंगे और पररवशष्ट-ग में िवणयत
तरीको ोंके अनुसार उनके परीिण होगों े।
(ख) अक्तल्ट्मेट तन्यता स्टरैस, यील्ड स्टरैस और प्रत्येक परीिण नमूने का इलाोंगेशन उवचत
एडब्लयूएस और एसएफए विवनदेश के अनुसार होगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 107
(3) िन वफक्तिट िेल्ड हॉट हृै वकों ग टेस्ट पररवशष्ट-ग में वदए अनुसार वकया जाएगा।
(4) (क) इलेररोड को सोंतो जनक माना जाएगा यवद परीिण की शतों के तहत कोई भी हॉट
हृै वकों ग न हो।
(ख) हृे टर हृै क की उपेिा की जा सकती है बशते िे िेल्ड के पूणय खोंड में न हो।
(5) प्रत्येक िेक्तल्डोंग क्तस्थवत के वलए एक टरायवीकसय तन्यता परीिण वकया जाएगा वजसके वलए
विवनमायता के द्वारा इलेररोड की वसफाररश की गई है वसिाय इसके वक फ्लैट क्तस्थवत के वलए दो
परीिणो ों की आिश्यकता होगी। अक्तल्ट्मेट तन्यता स्टरैस उवचत एडब्लयूएस और एसएफए
विवनदेश के अनुसार होगों े। परीिण वहस्से को तैयार करने का तरीका पररवशष्ट-ग में वदया गया
है।
(6) प्रत्येक िेक्तल्डोंग क्तस्थवत के वलए दो बेंड परीिण एक अग्र भाग के साथ और दूसरा रूट इन
टेंशन के साथ वकया जाएगा, वजसके वलए विवनमायता द्वारा इलेररोड की अनुशोंसा की गई है,
इसके अलािा प्रत्येक में से दो में के िल फ्लैट क्तस्थवत के वलए ऐसा वकया जाएगा। परीिण की
तैयारी और उसे करने का तरीका पररवशष्ट स-ग के अनुसार होगी। इलेररोड को सोंतो जनक
माना जाएगा बशते वक परीिण के समाप्त होने पर, नमूने के अोंदर बाहरी सतह पर 3 वम.मी. से
बड़ी या इसकी लोंबाई के साथ 1.6 वम.मी. से बड़ी कोई दरार या कमी न मापी गई हो। परीिण
नमूना के वसरो ों की समय-पूिय विफलता को अवीकीकार करने का कारण नही ों माना जाएगा।
वनकल एलॉय इलेररोड के वलए लागू एडब्लयूएस अथिा एसएफए विवनदेशो ों के अनुसार थ्री
टरायवीकसय साइड बेन्ड् परीिण वकया जाएगा।
(7) काबयन स्टील और लो एलॉय स्टील इलेररोड के वलए के िल पाोंच इम्पैर परीिण नमूनो ोंकी
आिश्यकता है। इलेररोड का आकार सोंबद् एडब्लयूएस अथिा एसएफए विवनदेश के
अनुसार होगा। चरपी V नोच परीिण लागू एडब्ल्यूएस अथिा एसएफए विवनदेश के अनुसार
वकया जाएगा।
(8) इलेररोड के प्रत्येक िगीकरण के वलए सोंबद् एडब्लयूएस अथिा एसएफए विवनदेश के
अनुसार अनडायल्ूटेड िेल्ड धातु के रासायवनक विश् ले ण के वलए परीिण वकया जाएगा।
(9) (क) इलेररोड की उपयोवगता का मूल्ाोंकन करने के वलए सोंबद् िेल्ड परीिण प्लेट की
रेवडयोग्राफी होनी चावहए और अन्य परीिणो ों को करने से पूिय िेल्ड वडपॉवजट सुदृा होना
चावहए।
(ख) रेवडयोग्राफी के उद्देश्य के वलए, बैवकों ग प्लेट को हटाना होगा और िेल्ड धातु के दोनो ों
सतहो ों को मशीनीकृ त या वघसाई द्वारा वचकना करना और िेल्ड धातु की मोटाई को कम वकए
वबना फ्लश वकया जाएगा।
(ग) परीिण प्रवहृया और वीकीकृ त मानदोंड सोंगत एडब्लयूएस अथिा एसएफए विवनदेश के
अनुसार होगों े।
(घ) परीिण प्लेट के दोनो ों वकनारो ों से 25 वममी की लोंबाई को हटाया जाएगा और रेवडयोग्राफी
के मूल्ाोंकन के दौरान इस पर विचार करने की आिश्यकता नही ोंहै।108 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
76. आिवधक जांच परीिण- इलेररोड के प्रत्येक िाण्ड सोंबोंधी वनम्नवलक्तखत आिवधक जाोंच परीिण
वकए जाएोंगे, अथायत:-
(i) आिवधक जाोंच परीिण में विवनयम 75 के तहत वनधायररत परीिणो ों से चयन शावमल है
और उन्हें 12 महीने से कम के अोंतराल पर दोहराया जाना चावहए तावक यह साक्ष्य उपलब्ध
कराया जा सके वक ितयमान में उत्पावदत इलेररोड प्रारोंवभक परीिणो ोंमें दजय गुणो ोंको बनाए
रखे हुए हैं।
(ii) विवनयम 75 के उप-विवनयम (2) में वनधायररत सीमा के भीतर वकसी भी दो आकार के
इलेररोड के साथ ऑल-िेल्ड तन्यता परीिण।
(iii) विवनयम 75 के उप-विवनयम (3) में वनधायररत िन टी ज्वाइोंट वफलेट िेल्ड हॉट हृै वकों ग
परीिण।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 109
अध्याय-3
वनमाषण और कायषकु शलता
भाग I
77. प्लेट स की तैयारी (1) सभी प्लेटो ों और बट स्टरैप के वकनारो ों को मशीनीकृ त वकया
जाना चावहए या मशीन द्वारा फ्लेम कट वकया जाना चावहए और कक्तल्कों ग वकनारो ों को प्लेट के तल से
20 वडग्री से अवधक और 70 वडग्री और 80 वडग्री के बीच, जहाों भी सोंभि हो, कोण पर बेिल्ड वकया
जाना चावहए। गसेट प्लेटटस उन वकनारो ोंको छोड़कर काटी जा सकती हैं, वजन्हें िेल्ड वकया जाना है।
(2) वजन प्लेटो ों को वबना ताप प्रवहृया या बाद में ग्राइोंवडोंग या मशीवनोंग के वलए मशीन द्वारा
फ्लेम-कट वकया जाना है, उनमें काबयन सामग्री 0.25 प्रवतशत से अवधक नही ोंहोनी चावहए।
(3) जहाों काबयन सामग्री 0.25 प्रवतशत से अवधक है ताप प्रवहृया, ग्राइोंवडोंग या मशीवनोंग की
जाएगी।
(4) सभी प्लेटो ोंके वकनारो ोंपर स्भूद वफवनवशोंग होनी चावहए।
(5) जोड़ की िेक्तल्डोंग शुरू करने से पहले (टैक िेक्तल्डोंग के अलािा) यह सुवनवश्चत वकया जाना
चावहए वक चैम्फडय वकनारे एलाइन्मेंट में हैं और प्लेटो ोंकी सतहो ोंके बीच एलाइन्मेंट में कवमयााँ तावलका
3/1 में दशायए गए से से अवधक न हो:
तावलका 3/1: खंडो ंके एलाइन्मेंट टॉलरेंस बट-िेल्ड होने चावहए
हृम सों. खोंड की मोटाई t वम.मी. में बेलनाकार शेल में जोड़ की वदशा
अनुदैर्घ्य पररधीय
1. 13 वम.मी. तक 13 वम.मी. सवहत ¼ t ¼ t
2. 13 वम.मी. से अवधक 19 वम.मी. तक 3 वम.मी. ¼ t
3. 19 वम.मी. से अवधक 38 वम.मी. तक 3 वम.मी. 5 वम.मी.
4. 38 वम.मी. और 51 वम.मी. तक 3 वम.मी. 3 वम.मी.
5. 51 वम.मी. तक t/16 or 9 वम.मी. में जो t/8 or 19 वम.मी.
कम हो में जो कम हो
(6) यवद असमान मोटाई के प्लेट वसरो ों को जोड़ा जाता है और सतहो ों के बीच का अोंतर दोनो ों
तरफ ऊपर उक्तिक्तखत सीमा से अवधक हो जाता है, तो मोटी प्लेट को एक समतल टेपर करने के वलए
पतला वकया जाएगा, जो वक यवद िाोंवछत हो तो, िेल्ड की चौड़ाई सवहत ऑफसेट के 4 गुना से कम हो।
अनुदैर्घ्य जोड़ो ों में, प्लेटो ों की मध्य रेखा मोटी प्लेट की मोटाई के 10 प्रवतशत के भीतर अवधकतम 3
वम.मी. के साथ एलाइन्मेंट में होनी चावहए।110 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
78. टील प्लेट स की नामषलाइवजंग या टरैस ररलीविंग – (1) सभी प्लेटें जो वडश या फ्लैंज
की गई हैं, उन्हें घटको ोंके रूप में स्टरैस ररलीि वकया जाएगा यवद कोल्ड िकय वकया गया हो और जब
पूरी तरह से या आोंवशक रूप से ताप प्रवहृया की गई हो तो नामयलाइज वकया जाएगा।
(2) जब स्टरैस ररलीविोंग की पररकिना बाद में की जाती है, तो घटको ों की स्टरैस ररलीविोंग
को अोंवतम स्टरेस ररलीविोंग के साथ जोड़ा जा सकता है।
79. प्लेट स की न्यूनतम मोटाई - कोई भी बॉयलर प्लेट 6 वम.मी. की मोटाई से कम नही ोंहोगी।
भाग - II
80. बेलनाकार शेल (1) प्रत्येक ररोंग को दो प्लेटटस से अवधक से नही ोंबनाया जाएगा और प्लेट
के बाहरी वकनारो ों को बेलनाकार वचि में रोल वकया जाएगा। बेंक्तल्डोंग पूणयत: मशीन द्वारा की जाएगी।
प्रोफाइल के सुधार के वलए स्थानीय ताप या हैमररोंग का उपयोग नही ोंवकया जाएगा।
(2) अनुदैर्घ्य सीम या सीम्स को वकसी भी उवचत क्तस्थवत में रखा जा सकता है
लेवकन सक्सेवसि ररोंग में सीम्स को एक सीध में नही ोंरखा जाएगा और न्यूनतम 150 वम.मी. द्वारा स्टेगर
वकया जाएगा।
(3) विक सेट बॉयलर के मामले में सीम या सीम्स को यथा व्यिहायय विकिकय से दूर रखा
जाएगा।
81. अनुदैर्घ्ष सीम्स की ल्पथवत - प्लेट के प्रत्येक ररोंग जो शेल, बैरल या डरम शेल को बनाता है, जहाों
व्यािहाररक हो, एक वहस्से में हो और इसकी अनुदैर्घ्य सीम इसके पास के ररोंग्स की हो। लोंकाशायर,
कोवनयश और अन्य प्रकार के बॉयलर, जहाों शेल का वहस्सा आग के सोंपकय में आता है, अनुदैर्घ्य सीम्स,
जहाों सोंभि हो,ों स्टीम स्पेस में हो, हृाउन के प्रत्येक तरफ बारी-बारी से व्यिक्तस्थत हो और दीिार से
दूर हो।
82. पररधीय और एंड सीम्स - पररधीय सीम्स की जोड़ की िमता विवनयमन 169 के उप-
विवनयमन (1) में विस्तृत के रूप में वनधायररत की जाएगी। पररधीय सीम्स के स्थान पर ट्यूब होल द्वारा
वलगामेंट बनने की क्तस्थवत में, जोड़ की िमता विवनयम 171 के अनुसार पररकवलत की जाएगी।
83. ऐगं ल ररंग - शेल प्लेट और या फ्लू खोंड का एोंड प्लेट से सोंलग्न करने के वलए ऐगों ल ररोंग को
लपेटा या मशीनकृ त वकया जाना चावहए तावक िे फ्लैट और बेलनाकार सतह में अच्छी से आ सकें
वजनसे उन्हें जोड़ा जाना है, और उन्हें काक्तल्कों ग वकनारो ोंपर मशीनी या मशीन गैस कट वकया जाए।
84. शेल ऐगं ल ररंग की मोटाई - जहाों शेल प्लेट और एोंड प्लेट को बाहरी ऐगों ल ररोंग के माध्यम द्वारा
जोड़ा जाता है, ऐगों ल ररोंग की मोटाई वनम्नवलक्तखत से कम नही ोंहोगी:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 111
तावलका 3/2
(1) 16 वम.मी. मोटाई सवहत 16 वम.मी. शेल प्लेट की मोटाई से 10 प्रवतशत अवधक
मोटाई की शेल प्लेट के वलए
(2) शेल प्लेट के वलए जो 16वम.मी. मोटाई मोटाई का 90 प्रवतशत और 17 वम.मी. से कम
से अवधक और 25 वम.मी. सवहत25 नही ों
वम.मी. मोटाई तक हो ों
(3) शेल प्लेट के वलए जो मोटाई में 25 25 वम.मी. की खोंड मोटाई िाले ऐगों ल बार से
वम.मी. से अवधक हो।ों वनवमयत।
85. िेल्डेड शेल प्लेट स - जैसा भी मामला हो, अध्याय-4 या अध्याय-12 के विवनयमन में वकए
गए प्रािधान के द्वारा िेल्डेड शेल की आिश्यकता को किर वकया जाएगा।
भाग – III
86. फ्लैट एन्ड प्लेट स - (1) जहाों व्यािहाररक हो, बॉयलर की फ्लैट या वडश एन्ड् प्लेट एक
रोल्ड प्लेट से बना एकल वहस्सा होगा। जहाों बॉयलर का व्यास इतना बड़ा हो जो इसे अव्यिहायय बनाता
हो, िहाों फ्लैट एन्ड् प्लेट को फ्यूशन बट- िेक्तल्डोंग द्वारा दो वहस्सो ों में बनाया जा सकता है। (वचि 12/1
और 12/2 देखें)। बाद के मामले में, िेक्तल्डोंग की लाइन बॉयलर के िैवतज अि के समानाोंतर होगी और
पूणय रेवडयोग्राफी जाोंच के अधीन होगी।
(2) प्लेटटस के फ्लैंजेज मशीन द्वारा की जाएगी। फ्लैंर्ज् एन्ड् प्लेट की कोल्ड फॉवमिंग के बाद ताप
प्रवहृया की जाएगी। विशे त: एक सोंचालन में, इस तरह की फ्लैंजेज को गमय वकया जाएगा, परोंतु जहाों
यह अव्यिहायय नही ोंहै हृीप मशीन फ्लैंजेज का उपयोग वकया जा सकता है बशते वक प्लेट पर उवचत
तापमान पर िकय वकया गया और प्लेट के उस वहस्से से पयायप्त दूरी पर गमय वकया गया वजस पर
तत्काल प्रवहृया की जानी है।
(3) िेल्डेड प्लेट की हॉट फॉवमिंग को अनुमवत दी जाएगी बशते वक िेल्डेड जोड़ हॉट
फॉवमिंग के बाद 100% रेवडयोग्रावफक या अल्ट्रासॉवनक जाोंच के अधीन हो।
(4) 20 वम.मी. मोटाई सवहत 20 वम.मी. तक िेल्डेड प्लेट को कोल्ड फॉमय वकया जा सकता है बशते वक
वनम्नवलक्तखत शतों को पालन वकया जाए:-
(क) कोल्ड फॉवमिंग के पहले, िेल्ड रीइन्फॉस्भेन्ट को वघस कर वचकना वकया जाएगा, और िेल्ड
मेंटल या ताप प्रभावित जोन में दरार आने से बचाने के वलए, जहाों जरूरी हो, विवनमायता सािधानी
बरतेगा।
(ख) यवद फॉवमिंग के बाद किेचर की आोंतररक विज्या मोटाई के 10 गुना से कम है, तो स्टरेस
ररलीविोंग जानी चावहए।
(ग) कोल्ड फॉवमिंग के बाद, िेल्डेड जोड़ो ों की जाोंच की जाएगी और उनकी पूरी लोंबाई में
100% रेवडयोग्रावफक या अल्ट्रासॉवनक जाोंच होगी। वकसी भी मोटाई के जोड़, वजसे मोटाई के 10 गुना112 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
से कम विज्या के वलए कोल्ड फामय वकया गया है, का चुोंबकीय कण या पेनेटरट विवधयो ों द्वारा दरारो ों के
वलए वनरीिण वकया जाएगा।
(घ) फ्लैंजेज सोंचालन के पूरा होने के बाद फ्लैंज सटीक पररधीय क्तस्थवत में (सोंबद् भागो ों के साथ
उवचत एलाइन्मेंट सुवनवश्चत करने के वलए या तो िृत्ताकार या सीधे जैसा जो आिश्यक हो), और अच्छी
सतह का, उभार से मुि, ग्रूि या अन्य स्थानीय अवनयमवतता; प्लेट का फ्लैट भाग सेट या वडस्टाशयन से
मुि होना चावहए।
(5) अनफायर बॉयलरो ोंके वनमायण में जब वडश्ड एन्ड् ताप िाली सतह का वहस्सा नही ोंहै तो आईएस: 2825
के अनुरूप कोल्ड स्पन वडश्ड एन्ड् का उपयोग वकया जा सकता है।
(6) बात का ध्यान रखा जाना चावहए वक फ्लैंजेज िृत्ताकार और अच्छी सतह के हो,ों स्थानीय अवनयमवतताएों
से मुि हो,ों और िे समानाोंतर और प्लेट के फ्लैट भाग के साथ िगय स्क्वायर में हो।ों
(7) सभी फ्लैंजेज और मशीन सोंचालन पूरा होने पर, एन्ड् प्लेट का फ्लैट भाग, सेट या वडस्टाशयन से मुि
होना चावहए।
87. मैनहोल में फ्लैट एन्ड प्लेट का सुदृढीकरण - (1) ऐसे सभी मामलो ोंमें वजसमें फ्रों ट एन्ड्
प्लेट गसेट प्लेट फनेस के नीचे रहता है, उसे मडहोल फ्रे म के वजतना सोंभि हो सके समीप रखा जाना
चावहए।
(2) जहाों फ्लैट एन्ड् प्लेट को शेल के सोंपकय के वलए फ्लैंज वकया जाता है, 38 वम.मी. की
अवधकतम मोटाई से फ्लैंजेज की आोंतररक विज्या प्लेट की मोटाई के 1.75 गुना से कम नही ों होनी
चावहए।
88. टीम स्पेस में एन्ड प्लेट स – जब स्टीम स्पेस में क्तस्थत बॉयलर की एन्ड् प्लेट का तप्त गैसो ों के
सोंपकय में आना तय है, तो एन्ड् प्लेटटस को ऐसे सोंपकय से शील्ड प्रदान की जानी चावहए।
89. अधषगोलाकार हृाउन - (1) अधयगोलाकार शेल हृाउन प्लेटो ों के खोंडो ों के किेचर को ठीक करने
के वलए एक ताप में दबाया जाएगा और वचि 12/3, 12/4, 12/5 या 12/6 के अनुसार एक साथ बट-
िेल्डेड वकया जाएगा। हृाउन का बेलनाकार भाग अधयगोलाकार भाग से ऊपरी तौर पर जुड़ा होगा।
(2) जहाों अधयगोलाकार फनेस के हृाउन को एक प्लेट से दबाया जाता है, उन्हें मशीन द्वारा
वबना पतला वकए हृवमक चरणो ों में बनाने के वलए दबाया जाएगा और पूरा होने पर एनील वकया
जाएगा।
90. वडश्ड एन्ड और हृाउन प्लेट स - (1) बॉयलर की वडश्ड एन्ड् प्लेट विशे त: एक रोल्ड प्लेट
से एक पीस में बना होगा। यवद बड़े व्यास के कारण यह अव्यिहाररक है, तो इसे वडश्ड एन्ड् प्लेट को
दो प्लेट फ्यूजन बट को एक साथ िेल्ड को साथ वमलाकर तैयार वकया जा सकता है और ऐसे मामलो ोंमें
स्टरेस ररलीविोंग और रेवडयोग्राफी जाोंच की आिश्यकता के सोंबोंध में जैसा विवनयम 86 में प्रािधान वकया
गया है, िह लागू होगा और िेल्ड की लाइन बॉयलर का िैवतज अि के समानाोंतर होगी।
(2) वजस आोंतररक विज्या में एक प्लेट वडश की जाती है, िह शेल के बाहरी व्यास से
अवधक नही ोंहोनी चावहए वजससे िह जुड़ी हुई है, लोंकाशायर और कोवनयश बॉयलरो ोंके मामले
को छोड़कर, जब विज्या शेल के व्यास के 1½ गुना से अवधक नही।ों[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 113
(3) शेल या फायरबॉक्स के फ्लैयग्स के कियचर की आोंतररक विज्या हृाउन या एन्ड् प्लेट
की मोटाई से चार गुना से कम नही ोंहोनी चावहए और वकसी भी क्तस्थवत में 63 वम.मी. से कम
नही ोंहोना चावहए।
(4) अपटेक्स के किेचर की आोंतररक विज्या हृाउन प्लेट की मोटाई से दुगुने से कम नही ों
होगी और वकसी भी क्तस्थवत में 25 वम.मी. से कम हो।
(5) फनेस ट्यूब को सोंलग्न करने के वलए आथोडॉक्स फ्लैंजेज के स्थान पर एन्ड् प्लेट पर
बोंग्ड -माउथ–वपसीज को िेल्ड वकया जा सकता है। ऐसी िेक्तल्डोंग विवनयम 97 के प्रािधान के
अनुरूप होगी।
(6) मैनहोल फ्रे म को फ्रों ट एन्ड् प्लेट पर िेल्ड वकया जा सकता है, और यह विवनयम 97
के प्रािधानो ोंके अधीन होगा।
91. ट्यूब प्लेट स - बैरल या शेल से जोड़ने के वलए स्भोक बाक्स ट्यूब प्लेट को फ्लैंज वकया
जाएगा और यह फ्लैट होनी चावहए और िेक्तल्डोंग द्वारा उससे जुड़ी होनी चावहए।
92. ट्यूब नेट के भीतर फ्लैट ट्यूब प्लेट स के भाग - (1) जहाों डायरेरली फायडय
मल्ट्ी-ट्यूबलर बॉयलरो ों में सभी ट्यूब नेस्ट का कु ल िेि पर 0.65 िगय.मी. से अवधक हो, स्टे ट्यूब वफट
वकया जाना चावहए।
(2) जहाों िैवतज मल्ट्ी – ट्यूबलर िेस्ट हीट बॉयलर में सभी ट्यूबो ों और एक नेस्ट में
डायरेर फायर लोको टाइप बॉयलरो ों का प्रबोंध वकया गया है, और वजसका एररया 1.95 िगय
मी. से अवधक हो, िहाों स्टे ट्यूबें वफट की जाएोंगी।
(3) ऐसे सभी मामलो ों मे जहाों सभी ट्यूबो ों को एक से अवधक नेस्ट में रखा गया है, स्टे ट्यूबें
वफट की जाएोंगी।
(4) ट्यूब प्लेटटस के भाग, जो ट्यूब के नेस्ट के बाहर क्तस्थत हैं उन्हें जहाों कही ोंभी प्लेट के
आकार को स्टीम प्रेशर आिश्यकता के अनुसार स्टे या सपोटय चावहए िहाों या तो मारजीनल
स्टे ट्यूब या अन्य माध्यमो ोंके द्वारा स्टे या सपोटय वदया जाएगा।
93. एन्ड प्लेट का फ्लैंजेज - सभी फ्लैग्ज शेल और फ्लू में अच्छी तरह से वफट होने चावहए। इन भागो ों
की वफवटोंग में फ्लैंजेज और/ या हैमररोंग िवजयत है। सभी फ्लैग्ड प्लेटो ों के कावकों ग वकनारे मशीनकृ त
और मशीन गैस कट होगों े।
भाग IV
94. फनेस - (1) वकसी भी फनेस या फायरबॉक्स टॉप, चाहे िह प्लेन या कारगैवटड हो की
मोटाई 22 वम.मी. से अवधक नही ोंहोनी चावहए, और सभी गोलाकार सेक्शन फनेस जब नई हो,ों तो िे
उतनी गोलाकार रूप में होनी चावहए वजतना जोड़ का प्रकार अनुमवत दे।
(2) फनेस फाउण्डेशन सीम्स के वलए जेड ऐगों ल ररोंग का उपयोग िवजयत होगा।
(3) फनेस हृाउन, अप्टेक और अन्य प्लेटटस जो तनाि में हो ों उन्हें फ्यूशन िेक्तल्डोंग द्वारा जोड़ा जा
सकता है बशते विवनयम 95 से 101 में वनधायररत शतों का अनुपालन करती हो।ों ऐसी प्लेटटस का शेल114 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
या शेल हृाउन के साथ एन्ड् कनेक्शन भी ऐसी शतो के अनुरूप होगा। लोंकाशायर और कोवनयश प्रकार
के बॉयलर वजसमें पूणय या प्लेन सेक्शन पर हो,ों यह वनमायण लागू नही ोंहोगा।
95. िैवतज बॉयलरो के फनेस - (1) आोंतररक फ्लूस के सेक्शन में से प्रत्येक एक प्लेट में होगें
और ठोंड़ा रहते हुए उन्हें गोलाकार रूप में मोड़ा जाएगा और लोंबित रूप में िेक्तल्डड वकए जाएोंगे।
(2) वकसी भी हृॉस-सेक्शन पर व्यास में अवधकतम अनुमेय वभन्नता प्लेट की मोटाई से अवधक
नही ोंहोगी।
(3) िेल्ड को फ्लूस के वनचले वहस्से में रखा जाना चावहए, और लगातार खोंडो ोंमें जोड़ो ोंको कम से
कम 305 वम.मी. पर तोड़ा जाएगा।
(4) गोलाकार सीम्स के वलए प्रत्येक फ्लैंयग को उपयुि मशीनरी के द्वारा समान ताप बनाया पर
जाएगा।
(5) आोंतररक स्टरैस से बचने के वलए खोंडो को धीरे धीरे ठोंडा होने वदया जाना चावहए।
(6) सभी फ्लू फ्लैंग्ज के कावकों ग वकनारो ोंको मशीनीकृ त या मशीन गैस कट वकया जाना चावहए।
(7) गोलाकार सीम्स को व्यिक्तस्थत वकया जाना चावहए तावक िे आसन्न फ्लू के साथ या शेल की
पररवध िाले सीम्स की सीध में न हो ोंऔर कम से कम 152 वम.मी. अलग हो।ों
(8) जब फ्लूस को दोनो ों एन्ड् प्लेटटस के सोंयोजन के वलए फ्लैंज वकया जाता है तो प्रत्येक सम्पूणय
फ्लू की कु ल लोंबाई बैक एन्ड् प्लेट की आोंतररक परत से शेल से फ्रों ट एन्ड् प्लेट की आोंतररक सतह की
लोंबा से अवधक नही ोंहोनी चावहए, दोनो ोंशेल के वनकट होने चावहए।
(9) जहाों फ्लूस को एन्ड् प्लेटटस के सोंयोजन के वलए फ्लैंयग करते हैं, शे खोंडो ों की तुलना में एन्ड्
खोंड 1.5 वम.मी. तक मोटा हो सकता है, ऐसे मामलो ों को छोड़कर जहाों मोटाई 21 वम.मी. तक
पररकवलत की गई है, जब एन्ड् खोंड की मोटाई 22 वम.मी. होगी।
(10) फनेस ररोंग का फ्लैंज भाग के किेचर की विज्या पानी की तरफ से 25 वम.मी. से कम नही ों
होनी चावहए।
(11) कॉरूगैवटड फ्लू के खोंडो ों को पररधीय रूप से फ्यूशन बट िेल्ड हो सकते है और तत्पश्चात
ताप प्रवहृया के द्वारा स्टरैस ररलीव्ड वकया जा सकता है।
(12) एडमसन फ्लैंग्ज के विकि के रूप में, फनेस जो वक आोंवशक रूप में कॉरूगैवटड खोंड के
साथ वफट होते हैं उन्हें फनेस से पयायप्त रूप से िेल्ड वकए गए उवचत क्तस्टफवनोंग ररोंगस के माध्यम से
मजबूत वकया जाएगा। वकसी भी क्तस्थवत में फ्लैट क्तस्टफ़नर 63 वम.मी.x 13 वम.मी. से कम नही ों होना
चावहए।
96. िवटषकल बॉयलर का फनेस - (1) िवटयकल बॉयलर के फनेस का वनमायण एक या अवधक
लोंबाई िार खोंडो ों में वकया जा सकता है, प्रत्येक खोंड को एक प्लेट से पूणय गोलाकार के रूप में रोल
जाता है। ऐसे मामलो ों में, घटक खोंडो ों को इलेररकली बट िेक्तल्डोंग के द्वारा पररधीय रूप जोडा जा
सकता है और विवनयम 98 के अनुरूप स्टरेस ररलीव्ड वकया जाएगा।
(2) िवटयकल बॉयलर के मामले में जहाों ट्यूब प्लेट, फायरबॉक्स का भाग होती हैं ट्यूब प्लेट के
वहस्से का वनमायण दो िवटयकल खोंडो ों में वकया जा सकता है और िवटयकल सीम्स को जब िेल्ड वकया
जाएगा तो उन्हें स्टरैस ररलीव्ड वकया जाएगा। व्यास में अवधकतम वीकीकृ त वभन्नता, वकसी भी हृास-खोंड
में 900 वम.मी. व्यास तक के फायरबॉक्स के वलए 6 वम.मी. से अवधक नही ों होगी, या 900 वम.मी. से
अवधक व्यास िाले फायरबॉक्स के वलए 10 वम.मी., या प्लेट की आधी मोटाई, जो भी अवधक हो, से
अवधक नही ोंहोगी।
(3) सकुय लर फनेस को विशे रूप से टैपर वकया जाएगा, प्रवत 300 वम.मी. ऊों चाई पर 38 वम.मी. व्यास
के एक टैपर की वसफाररश की जा रही है। फनेस और शेल के बीच तली पर न्यूनतम जल का स्थान[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 115
760 वम.मी. व्यास तक के बॉयलरो ोंके वलए 50 वम.मी. से कम नही ोंहोना चावहए और 760 वम.मी. व्यास
से अवधक के बॉयलरो ोंके वलए 63 वम.मी. से कम नही ोंहोना चावहए।
(4) िेक्तल्डोंग की विवध विवनयम 151 के अनुसार होगी। पानी की ट्यूब को डालने के वलए फायरबॉक्स में
बने फ्लैटो ों की फ्लैट और घुमािदार सतहो ों के जोंक्शन पर पयायप्त विज्या होनी चावहए और िह तेज
कोनो ोंया टूल माकय से मुि होना चावहए। प्लेट अनािश्यक रूप से पतली नही ोंहोनी चावहए।
(5) ओजी फ्लैक्तयगोंग जो फायरबॉक्स के साथ या एक अलग से ररोंग उवचत मशीनरी के द्वारा एक ताप में
बनाया जाएगा और आोंतररक तनाि से बचने के वलए धीरे धीरे ठोंडा वकया जाएगा। फायर होि के
माउथवपस ररोंग या फाोंउडेशन ररोंग्स हल्के स्टील के होने चावहए। फाोंउडेशन ररोंग के वलए जेड खोंड का
उपयोग नही ोंवकया जाएगा।
(6) महत्वपूणय खोंड फ्यूशन के सकुय लर ररोंग द्वारा फायर होल के रोल से शेल या फायरबॉक्स के
साथ फ्यूजन िेल्ड वकए गए िवटयकल प्रकार के बॉयलर के फनेस को सोंलग्न वकया जा सकता है। फायर
होल के वलए शेल में ओपवनोंग की शेल प्लेट के बाहर िेल्ड वकए गएररोंग द्वारा पयायप्त रूप से क्तस्थर
प्रवतपूवतय की जाएगी।
(7) फायर होल में फायरबॉक्स प्लेट और शेल प्लेट को फ्लैंज और साथ में फ्यूशन िेल्ड वकया जा
सकता है।
97. फ्यूजन बट िेल्डेड अनुदैर्घ्ष सीम्स - जहाों अनुदैर्घ्य सीम्स फ्यूजन बट िेल्डेड हैं, िहाों
वनम्नवलक्तखत सािधानी बरती जाएगी:
(i) 20 वम.मी. या उससे ज्यादा की मोटाई प्लेट को प्रत्येक साथ लगे हुए वकनारो ों के दोनो ों तरफ
से बेिल्ड वकया जाएगा परोंतु प्रत्येक वकनारे पर समान आिश्यक रूप से बेिल होना आिश्यक नही ोंहै।
(वचि 3/I और 3/2 देखें) 20 वम.मी. से कम मोटाई की प्लेट को साथ लगे हुए प्रत्येक वकनारो ों के एक
तरफ से बेिल्ड वकया जा सकता है।(वचि 3/3 और 3/4 देखें)। बेिल का शावमल कोण 60 वडग्री से
कम नही ोंहोना चावहए और बेिवलोंग वचि 3/1 से 3/4 में दशायए गए रूप में से कोई भी एक हो सकती
है।
वचि 3/1 वचि 3/2 वचि 3/3 वचि 3/4
(ii) िेल्ड धातु के पूरे भेदन को प्राप्त करने के वलए जब िे िेल्ड वकए जाएगें तो प्लेटो ोंके बीच एक
अतोंराल रखा जाना चावहए। दोनो ोंओर से जोड़ो ोंको िेल्ड वकया जाना चावहए और प्रत्येक रन को बनाने
के बाद लैग को हटा देना होगा। जोड़ की दूसरी साइड को िेल्ड करने से पूिय वकसी भी लैग या प्रथम
रन के तल पर वकसी दो को वघसाई, वचवपोंग या मशीवनोंग द्वारा हटाया जाएगा। प्लेट की कोई
अप्रेवसएबल अोंडरकवटोंग नही ोंकी जाएगी।
(iii) आोंतररक स्टरैस को दूर करने के उद्देश्य से फ्यूजन िेल्ड से सटे प्लेटो ों को िेक्तल्डोंग के
बाद कु शलता से एनील वकया जाएगा।116 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
98. फनेस हृाउन - (1) फनेस हृाउन एक प्लेट से बनाया जाएगा और इसे फनेस से जोड़ने िाला
सीम बॉयलर शेल के वकसी भी पररवध सीम के सीध में नही ोंहोगी।
(2) फनेस हृाउन को फायरबॉक्स के िवटयकल भाग से िेक्तल्डड वकया जा सकता है। जोड़ को
इलेक्तररक आकय प्रवहृया के द्वारा फ्यूशन बट िेक्तल्डड होना चावहए,बशते विवनयम 97 के अनुसार फ्यूशन
बट की शतों पालन वकया जाए। जहाों जोड़ को फनेस हृाउन के वकनारो ों के साथ िेल्ड वकया जाना है
और फायरबॉक्स बॉडी को वचि III / 3 या वचि III / 4 के अनुसार बेिल वकया जाएगा। फ्लैंक्ति विज्या
के किेचर की िहृता के प्रारोंभ से फनेस हृाउन प्लेट के फ्लैंज की गहराई कम से कम 38 वम.मी. के
साथ प्लेट की मोटाई के चार गुना से कम नही ोंहोनी चावहए। िेक्तल्डोंग के पूरा होने पर फायरबॉक्स को
ताप प्रवहृया से प्रभािी रूप से स्टरैस ररवलि वकया जाएगा (विवनयमन 75 भी देखें)।
99. हृॉस ट्यूब - (1) हृॉस ट्यूब सीमलैस पाईप या रोल्ड प्लेट से या स्टरीप और इलेक्तररक
आकय प्रवहृया द्वारा इलेक्तररक प्रवतरोधक या फ्यूशन बट िेक्तल्डड पाइप में बनाया जाएगा। फ्यूशन
िेक्तल्डोंग अध्याय-12 की आिश्यकताओ ों के अनुरूप होना चावहए। इन पाइपो ों की टॉलरेंस िमता
विवनयम 251 की आिश्यकताओ ों के अनुरूप होनी चावहए।जहाों िेक्तल्डड पाइप उपयोग होते है, िेल्डेड
लोंबित ऐसे स्थान पर क्तस्थत होने चावहए वक िह सीधे तौर से आग के प्रभाि में नही ोंआए।
(2) हृॉस ट्यूब का आोंतररक व्यास 305 वम.मी. से अवधक नही ों होना चावहए। न्यूनतम
मोटाई 8 वम.मी. होगी।
(3) जहाों िेल्डेड वनमायण का उपयोग वकया जाता है, िहाों फनेस प्लेट और फ्लस में प्रिेश
करने के वलए ट्यूब पयायप्त लोंबाई की होनी चावहए और इसके सभी और पानी होना चावहए अथिा
पररवध के वकसी वहस्से में पानी की जगह 6 वम.मी. से कम और 16 वम.मी. से अवधक नही ोंहोनी चावहए।
जहाों ट्यूबो ोंको फ्यूजन िेल्ड वकया जाता है, िहाों फायरबॉक्स प्लेटटस को उपयुि रूप से कै म्फर वकया
जाएगा और जोड़ो ोंको बाहरी और आोंतररक रूप से िेल्ड वकया जाएगा (वचि 3/5 देखें)
वचत्र 3/5 िवटषकल हृॉस ट्यूब बॉयलरो ंके हृॉस ट्यूब का फ्यूजन िेल्पल्डंग
100. अपटेक्स
(1) सीमलैस पाईप या रोल्ड प्लेट या स्टरीप से और इलेक्तररक आकय प्रवहृया द्वारा इलेक्तररक
प्रवतरोधक या फ्यूशन बट िेक्तल्डड पाइपो ों में बनाया जाएगा। इन पाइपो ों की टॉलरेंस िमता विवनयम
224 की आिश्यकताओ ों के अनुरूप होनी चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 117
(2) अपटेक यह होगा वक फायरबॉक्स हृाउन प्लेट में ओपवनोंग के अपिडय फ्लैंज पर इलेक्तररक
आकय प्रवहृया द्वारा फ्यूशन बट िेक्तल्डड होना चावहए, बशते फ्यूशन िेल्ड के वलए विवनयम 97 में में दी
गई शतों का पालन वकया गया हो। अपिडय फ्लैंज के वकनारो ों और अपटेक के समीपिती के वकनारो ों
को वचि 3/3 या वचि 3/4 के अनुसार बेिल वकया जाएगा। फ्लैंवजोंग विज्या के किेचर के आरोंभ से
हृाउन प्लेट के ओपवनोंग गहराई न्यूनतम 25 वम.मी. और प्लेट की मोटाई के दोगुने से कम नही ोंहोनी
चावहए। िेक्तल्डोंग के पूरा होने पर अपटेक और हृाउन प्लेट को ताप प्रवहृया के द्वारा कु शलता से स्टरैस
ररवलि वकया जाएगा।
(3) जहाों फ़ायरबॉक्स हृाउन प्लेट को भी फ़ायरबॉक्स के मुख्य भाग से फ्यूजन िेल्डेड वकया
जाता है, िह िेक्तल्डोंग के पूरा होने पर ताप प्रवहृया से अपटेक से पूरा वकए गए फ़ायरबॉक्स को प्रभािी
ढोंग से स्टरैस ररवलि वकया जाएगा।
(4) िेल्डेड अपटेक को इस तरह व्यिक्तस्थत वकया जाएगा वक िेल्ड सीधे मैनहोल की लोंबित कें द्र
रेखा के सामने रहे।
101. लोको टाइप फायरबॉक्स – (1) फ्लैंज की गहराई के अधीन सीम्स को इस प्रकार िेल्ड
वकया जाएगा, वक िेल्डेड सीम्स स्क्रू स्टे की पहली और दूसरी पोंक्तियो ों के बीच या फ्लैंज और
समीपिती पोंक्ति के स्क्रू स्टे के बीच हो।
(2) फायरहोल माउथपीस को उसी प्रकार िेल्ड वकया जा सकता है जब फायरबॉक्स और शेल
को इस उद्देश्य के वलए फ्लैंज वकया जाता है।
(3) िेक्तल्डोंग विवनयम 97 के अनुरूप होगा।
भाग V
102. बार टे - बार स्टे को वकसी भी वहस्से में िेल्ड नही ों वकया जाएगा। उनके पास मुख्यत: प्लस
थ्रेड होगों े, स्टे के वकनारे अपसेट होगों े या इस उद्देश्य के वलए मध्य भाग को कम वकया जा रहा है। आग
की प्रवहृया से गुजरने िाले स्टे बार को बाद में एनील वकया जाएगा।
103. अनुदैर्घ्ष टे: - (1) अनुदैर्घ्य और समान ठोस स्क्रू स्टे को प्रत्येक छोर पर नट से कु शलता से
सुरवित वकया जाएगा। जहाों िे लोंबाई में 3657 वम.मी. से अवधक हैं, उन्हें इसकी लोंबाई के साथ 1829
वम.मी. के अोंतराल पर सपोटय वदया जाएगा।
(2) जहाों दोनो ों प्लेटो ों के माध्यम से स्टे को स्क्रू वकया गया है, िहाों स्टे और होि काोंवटवनिस थ्रेड
होना चावहए और बाहर की तरफ से नट और िाशर के साथ वफट होना चावहए। जहाों स्टे क्लीयररोंग
होि से गुजरता हो और िॉशर भी वफट वकया जाएगा। जहाों स्टे प्लेट की सतह पर नामयल न हो, िॉशर
को इस प्रकार आकार वदया जाएगा वजससे नटटस के वलए सही सतह बनाई जाए या नक्कल ज्वाइोंट को
वफट वकया जा सके ।
(3) िवटयकल बॉयलरो ों में स्टे को या तो दोनो ों हृाउन प्लेटटस में स्क्रू वकया जाएगा या फनेस हृाउन
प्लेट में स्क्रू वकया जाएगा और शेल हृाउन प्लेट में क्लीयररोंग होि से गुजारा जाएगा।
104. टे हेतु नट स और िॉशर (1) िाशर, स्टे के थ्रेडेड वहस्से के व्यास का कम से कम 2½ गुना
और मोटाई में 6 वम.मी. से कम नही ोंहोना चावहए।118 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) बाहरी नटटस की मोटाई कम से कम स्टे के थ्रेडड वहस्से के व्यास के बराबर होनी चावहए।
जहाों बार स्टे एोंड प्लेटटस में क्लीयररोंग होि से होकर गुजरता है, िहाों स्टे के थ्रेडेड वहस्से के व्यास के
दो-वतहाई से कम मोटाई के आोंतररक नट वफट वकए जाने चावहए।
105. ज्वाइंटेड टे - जहाों ज्वाइोंटेड लोंबित स्टे वफट वकया गया है, यवद व्यािहाररक हो तो, वपन
के साथ वफट उस स्टे से 25 प्रवतशत अवधक होना चावहए। यवद होल में वपन ढीले हैं, तो कु ल लैकनेस
1.6 वम.मी. से अवधक नही ों होनी चावहए। वपन्ऱ आई फोवजिंग के शोल्डर के वजतना सोंभि हो उतना
करीब होना चावहए। फोवजिंग का शोल्डर चौतरफा कम से कम 13 वम.मी. चौड़ा होना चावहए, यानी
शोल्डर पर व्यास होल के व्यास और 25 वम.मी. से योग कम नही ोंहोना चावहए।
106. डायग्नल बार या रॉड टे - डायग्नल रॉड या बार स्टे का सेक्शनल एररया डायरेर स्टे
के उसी अनुपात के समान होगा जैसा वक डायग्नल स्टे की लोंबाई का सोंबोंध उस लोंबित रेखा की लोंबाई
से जो डायग्नल स्टे के छोर से सफे स सपोटय तक है। डायग्नल स्टे के वकनारे, मुड़े हुए नही ोंहोने चावहए,
लेवकन प्लेट से बेिेल्ड िाशर और नटटस के साथ या ररिेटेड टी, ब्लॉक या एोंगल और शैकल वपन के
साथ जुड़े होगों े (आई और वपन के वलए विवनयम 105 देखें)।
भाग VI
107. स्क्रू ड टे - (1) इनके वलए स्क्रू ड स्टे और होि एक कों टीवनिस थ्रेड के साथ स्क्रू होगें
(2) स्टे का स्क्रू ड थ्रेड साफ और जाोंच या कमी से पूरी तरह से मुि पूरी गहराई से सही होना होना
चावहए। व्हाइटिथय फामय का होल में अच्छी तरह और एक गुड वफट हो। मध्य भाग को विशे रूप से
थ्रेड के नीचे तक घुमाया जाना चावहए।
(3) स्टे को कम से कम 11 थ्रेड प्रवत 25 वम.मी. के पतले थ्रेड से स्क्रू वकया जाएगा।
(4) थ्रेड के उपर स्टे का व्यास 19 वम.मी. से कम या फायरबॉक्स प्लेट की मोटाई से दुगुना जो भी
अवधक हो से कम नही ोंहोना चावहए।
(5) िवटयकल बॉयलर के फनेस के स्टे का वपच फनेस प्लेट की मोटाई के 14 गुना से अवधक नही ों
होगा।
(6) जहाों स्टे नटटस के साथ वफट नही ों हैं, िहाों वकनारे क्तस्थर शी य के रूप में ररिेटे वकए जाएोंगे।
िैकक्तिक रूप से, स्टे को शेल और फायरबॉक्स प्लेटो ों के माध्यम से स्क्रू वकया जा सकता है और
प्रोजेक्तरोंग एोंड को अनुमोवदत तरीके से पयायप्त रूप से वफलेड िेल्ड वकया जाएगा। प्लेट की सतह से
स्टे के एोंडका प्रोजेक्शन स्टे के व्यास के एक चौथाई से कम नही ोंहोना चावहए लेवकन वकसी भी क्तस्थवत
में 6 वम.मी. से कम नही ोंहोना चावहए। स्टे का पूरा वकनारा िेक्तल्डोंग के पूरा होने पर वदखाई देगा।
(7) लोको टाइप बॉयलर के हृाउन स्टे को या तो नटटस के साथ वफट होना चावहए या आग की तरफ से
ररिेटे वकया जाना चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 119
108. ऐक्सीअल वडरवलंग - सभी स्क्रू ड स्टे वजनकी लोंबाई 355 वम.मी. से कम है, को 5 वम.मी. व्यास
के साथ 13वम.मी. गहराई के साथ टैल- टेल होल से वडरल वकया जाना चावहए। स्टे जो वक एक तरफ से
छुपे हुए हैं को मुख्य रूप से होलो स्टे बार से बना होगा।
109. टे नट स - (1) कम्बशन चैम्बर और फायरबॉक्स में स्क्रू स्टे के नटटस थ्रेडटस के ऊपर
38 वम.मी. व्यास तक के स्टे के वलए 19 वम.मी. से कम मोटाई नही ोंहोनी चावहए, 41 वम.मी. और 44
वम.मी. के स्टे वलए 22 वम.मी. मोटाई, 47 वम.मी. और 51 वम.मी. स्टे के वलए 25 वम.मी. मोटाई, और 51
वम.मी. से अवधक व्यास िाले स्टे के वलए 28 वम.मी. मोटाई होनी चावहए।
(2) नटटस ठोस मध्यम स्टील या लोहे के बने होने चावहए लेवकन अगर आग के सम्पकय मे लाना हो
तो वबना िेल्ड के होने चावहए।
110. एन्ड टे की स्पेवसंग- किष के वलए अनुमवत आवद - फायरबॉक्स और कम्बशन चैम्बर के शी य
के वलए ट्यूब प्लेट या फायर होल प्लेट या बैक प्लेट जैसा भी मामला हो समीप क्तस्थत स्टे की पोंक्तियो ों
के बीच की दूरी, और उनके फ्लैंग्ज पर इन प्लेटो ों का कियचर के आरोंभ स्टे के िैवतज वपच से अवधक
नही ोंहोना चावहए।
भाग VII
111. फायरबॉक्स और कम्बशन चैम्बर हृाउन के वलए गडषर टे - (1) जब सामान्य प्रकार
के प्रत्येक गडयर को, स्टे बोल्ट् और नटटस के साथ वफट गया हो, तो िे पयायप्त िमता के डबल प्लेट
इोंटरकनेरेड प्रकार के होने चावहए तावक हृाउन प्लेट से वीकतोंि रूप से प्लेट को सपोटय करने के वलए
हृाउन पर भार के अनुपात को समथयन सपोटय कर सके , और बॉल्ट् या िेल्ड सोंलग्नको ों में अनुप्रयुि
भार को टॉलरेंस करने के वलए पयायप्त हृास- सेक्शनल िेि होना चावहए।
(2) हृाउन प्लेट और गडयर बार के अोंडरसाइड के बीच साफ िाटरिे वजतना व्यािहाररक हो
उतना बड़ा होना चावहए परोंतु वकसी भी मामले में 38 वम.मी. से कम नही ोंहोना चावहए जैसा वक वचि
3/8 वदया गया है।
(3) गडयर का वसरा फ्लैट हृाउन प्लेट पर नही ोंवटका रहेगा बक्तल्क िवटयकल एन्ड् या साइड प्लेट के
कोनो ोंको बेंड पर सािधानीपूियक सीधे ही वफट वकया जाएगा।
(4) गडयर प्लेटो ों के टोस गडयर प्लेटो ों के साथ ठोस होगों ी और उनसे जुड़े अलग-अलग टुकड़े नही ों
होगों े
(5) गडयर को बोल्ट् या स्क्रू द्वारा हृाउन प्लेट से अच्छी तरह से जोड़ा जाएगा।
(6) जहाों एक ऑल िेल्डेड फायरबॉक्स वफट वकया जाता है, िहाों गडयर रहता है, तनाि से राहत से
पहले फायरबॉक्स में िेल्डेड वकया जा सकता है। उप-विवनयम (2) (वचि 3/6 और वचि 3/7) के
अनुसार जलमागों के वलए गडयर स्टे को पुनः प्राप्त वकया जाएगा। ऐसे गडयरो ों को एक अनुमोवदत विवध
द्वारा फायरबॉक्स हृाउन में सुरवित रूप से िेल्ड वकया जाएगा। िेक्तल्डोंग की विवध और अटैचमेंट का
अनुपात वनरीिण प्रावधकारी की सोंतुवष्ट स के अनुरूप होना चावहए।120 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 3/6 वचत्र 3/7
भाग VIII
112. गवसट टे - (1) गवसट प्लेट फ्लैट होगों े और परपेंवडकु लर होगों े। गवसट एोंगल को शेल एोंड
प्लेट और गसेट प्लेट के वनकट बेड पर वफट वकया जाएगा। प्लेट की हृै वकों ग या सेवटोंग िवजयत है।
(2) गवसट स्टे, जहाों वफट वकया गया है, में शेल और एन्ड् प्लेट के डबल एोंगल द्वारा सुरवित फ्लैट प्लेट
शावमल होगा, और उसे वनम्नवलक्तखत के अनुरूप वडजाइन वकया जाना चावहए।
113. ब्ीवदंग स्पेस (1) गवसट स्टे इस तरह से व्यिक्तस्थत वकया जाएगा तावक फनेस कनेक्शन और
ट्यूब नेस्ट के आसपास प(1) यायप्त िीवदोंग स्पेस हो।
(2) लोंकाशायर बॉयलर के वलए फनेस और फ्लूज के ऊपर एोंड प्लेटो ों के वहस्से के वलए नीचे
दी गई तावलका में वदखाए गए अनुपात सोंस्तुवत की गई है।
तावलका 3/3
हृम सों. एन्ड् प्लेट की मोटाई लों (वचि.3/8) लों (वचि 3/9)
(1) (2) (3) (4)
वम.मी. वम.मी. वम.मी.
1 13 228 254
2 14 254 254
3 16 279 309
4 17 309 330
5 19 309 330
6 21 309 330
7 उपरोि 21 317 343[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 121
वचि 3/8 वचि 3/9
(3) वचि 3/8 वनम्नवलक्तखत क्तस्थवतयो ोंके वलए अनुशोंवसत िीवदोंग स्पेस को दशायता है: फ्लैट एोंड, एोंड
प्लेट से जोड़ने के वलए फनेस या फ्लूज, एडमसन फ्लैंर्ज् सीम्म सीम के साथ तैयार फनेस और फ्लूज।
(4) वचि 3/9 वचि 3/8 के समान क्तस्थवतयो ों को वदखाता है वसिाय इसके वक एोंड प्लेट को फनेस
या फ्लूज ररोंग कनेक्शन के वलए बाहर की ओर फ्लैंज वकया गया है, वचि 3 /8 में प्लेट की समान मोटाई
के वलए वनधायररत माप से 25 वम.मी. िीवदोंग स्पेस अवधक होने की अनुमवत दी गई है।
(5) जहाों प्रत्येक आोंतररक फ्लूज या लोंकाशायर बॉयलर में 1830 वम.मी. लोंबाई के कॉरगैवटड खोंड
को शावमल है, उपरोि तावलका में वदए गए पररमाप को चारो ों ओर से लगभग 38 वम.मी. कम वकया
जा सकता है।
(6) यह वसफाररश की जाती है वक फनेस और फ्लूज के नीचे िीवदोंग स्पेस उपरोि तावलका वदए
गए पररमाप का व्यास लगभग आधा होना चावहए।जबवक वकसी अन्य व्यिस्था का उपयोग करना
िाोंवछत है जो अवधक या कम लचीलापन देता है, िीवदोंग स्पेस की मािा पर विशे रूप से माना जाएगा
और मामले की आिश्यकता के अनुसार सोंशोवधत वकया जाएगा।
(7) ट्यूब नेस्ट के ऊपर गवसट स्टे उपरोि हेतु, जैसा वक आोंतररक फनेस के वबना अपवशष्ट स
ताप बॉयलरो ों में लगाया जाता है, गवसट एोंगल के अग्र भाग के ररिेटटस के कें द्र के टॉप ट्यूबो ों
की मध्य रेखा से 203 वम.मी. के िीवदोंग स्पेस की वसफाररश की जाती है (वचि 3 / 9 देखें)
114. गवसट एंगल - स्टे को शेल और एोंड प्लेटटस से जोड़ने िाले गसेट एोंगल शेल प्लेट की मोटाई
का कम से कम 7/8 िाों वहस्सा होनी चावहए, परोंतु 13 वम.मी. मोटाई से कम नही ोंहोनी चावहए।
115. गवसट टे पर लोड - बॉयलर के एोंड प्लेट को सपोटय को इस प्रकार वडजाइन वकया
जाएगा वक प्रत्येक गवसट स्टे उसके द्वारा समवथयत िेि पर प्रेशर के कारण उस पूरे भार का िहन कर
सके ।
भाग IX
116. बाहरी दबाि के अधीन बॉयलर ट्यूब - दोनो ोंप्लेन और स्टे स्भोक ट्यूब या तो स्टील या रॉट
आयरन ट्यूब से बने होने चावहए और इलेक्तररक- प्रवतरोधक–िेल्ड, या सीमलेस होने चावहए।122 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
117. प्लेन ट्यूब की वफवटंग - (1) प्लेन ट्यूब को दोनो ों वसरो ों पर विस्ताररत वकया जा
सकता है। यह होने चावहए। विस्तार ट्यूब प्लेट की पूरी मोटाई में समानाोंतर होगा। प्लेन ट्यूब के गैस
इनलेट वसरे बेल- माउथ, बीडेड या िेल्ड भी वकया जा सकता है।
(2)जहाों स्टे ट्यूब वफट नही ोंहैं, िहाों ट्यूबो ों के वसरो ों को फायर बॉक्स एोंड पर बीडेड वकया जाएगा और
दूसरे छोर पर बीडेड या बेल-माउथ वकया जाएगा। यवद बेल-माउथ वकया जाता है तो ट्यूब, ट्यूब प्लेट
से कम से कम 13 वम.मी. बाहर वनकले रहेंगे।
भाग X
118. टे ट्यूब का स्क्रू थ्रेड – (1) स्टे ट्यूबो ोंको दोनो ोंवसरो ोंपर वनरोंतर धागो ोंसे स्क्रू वकया जाएगा, और
ट्यूब प्लेटो ों में छेदो ोंको कों टीवनयस थ्रेड से टेप्ड वकया जाएगा। धागो ोंकी वपच 11 थ्रेड प्रवत 25 वम.मी. से
अवधक पतली नही ों होनी चावहए। स्टे ट्यूबो ों को रोलर विस्तारको ों द्वारा विस्ताररत वकया जाना चावहए
और के िल कॉवकों ग द्वारा सही नही ोंवकया जाना चावहए।
(2) स्टे ट्यूबो ों को िेक्तल्डोंग द्वारा जोड़ा जा सकता है, ऐसे मामले में िे लोकल एररया को छोड़कर
एक ही ट्यूब नेस्ट के भीतर नही ोंहोगों े, जहाों िेक्तल्डोंग द्वारा दो से अवधक वनकटिती स्टे ट्यूब सोंलग्न नही ों
वकए जा सकते हैं। जोड़ने का रूप ऐसा होना चावहए वक िेक्तल्डोंग के अलािा एक मैके वनकल होल्ड हो,
जैसा वक वचि 3/10 में वदखाया गया है। िेक्तल्डोंग के पूरा होने पर स्टे ट्यूबो ों को धीरे धीरे से वफर से
विस्ताररत वकया जाएगा।
वचि 3/10 िेल्ड स्टे ट्यूब का आदशय उदाहरण
119. टे ट्यूब - (1) स्टे ट्यूब िह ट्यूब है वजनकी िेल्ड गहराई नोवमनल ट्यूब मोटाई से 3वम.मी.
अवधक है। इन स्टे ट्यूबो ोंकी ट्यूब नेस्ट के भीतर आश्यकता नही ोंहोती है वसिाय जब ट्यूब नेस्ट में ऐसी
टयूबें हैं जो के िल विस्तार योग्य हैं।
(2) यवद ट्यूब नेस्ट में प्लेन टयूबें हैं वजन्हें विस्ताररत और वबवडड वकया जाता है तो, विक्तस्तररत और बेल
वकया जाता है या विस्ताररत और िेल्ड वकया जाता है, िेल्ड स्टे ट्यूब का उपयोग पयायप्त सोंख्या में
बाहरी वकनारे की पोंक्ति में वकया जाएगा तावक ट्यूब एररया के बाहर फ्लैट प्लेट लॉवडोंग की जा सकें ।
(3) 600 वडग्री सेक्तियस से अवधक की लौ या गैस के तापमान के सोंपकय में आने िाली प्लेन ट्यूबो ों या
स्टे ट्यूबो ों के वलए, िेल्डेड ट्यूबो ों के वसरो ों को िेल्ड के साथ फ्लश वकया जाएगा। यवद इस प्रकार सोंपकय
में है लाया गया, तो िेल्डेड ट्यूबो ों के वसरो ों को िेल्ड से अवधक 10 वम.मी. तक बााया जाएगा या
विस्ताररत ट्यूबो ों के मामले में ट्यूबो ों को ट्यूब प्लेट से अवधकतम 15 वम.मी. तक बाहर प्रोजर वकया
जाएगा।
(4) प्रत्येक स्टे ट्यूब को उन प्लेटो ोंपर भार के अपने उवचत अनुपात को टॉलरेंस करने के वलए वडजाइन
वकया जाएगा, जो सपोटय करती है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 123
(5) ट्यूब प्लेट में िेल्डेड स्टे ट्यूब की मोटाई ऐसी होगी वक ट्यूब के सबसे पतले वहस्से पर अिीय तनाि
7.14 वकग्रा/िगय वम.मी. से अवधक न हो।
(6) स्टे ट्यूब की मोटाई वकसी भी भाग पर नीचे दी गई तावलका में दशायए गए मान से कम नही ोंहोनी
चावहए। ट्यूब ऑडयर करते समय माइनस टॉलरेंस को ध्यान में रखा जाएगा।
तावलका 3/4
हृम सों. वम.मी. में नाममाि बाहरी व्यास वम.मी. . में न्यूनतम मोटाई
(1) (2) (3)
1. 38 तक 2.28
2. 38 से अवधक परोंतु 51 से कम 2.81
3. 51 से अवधक परोंतु 70 से कम 3.12
4. 70 से अवधक परोंतु 76.2 से कम 3.38
5. 76.2 से अवधक परोंतु 88.9 से कम 3.96
6. 88.9 से अवधक परोंतु 101.6 से कम 4.26
7. 101.6 से अवधक परोंतु 127 से कम 4.55
120. टे ट्यूबो ंके मोटे वसरे - यवद स्टे ट्यूबो ों को स्क्रू वसरो ों पर उनकी मोटाई बााने की
आिश्यकता होती है, तावक थ्रेड के वनचले वहस्से की मोटाई ट्यूब के मुख्य भाग के समान ही हो, तो यह
मोटाई िेक्तल्डोंग प्रवहृया द्वारा नही,ों बक्तल्क अपसेवटोंग करके प्राप्त की जाएगी, और ट्यूबो ों को अपसेवटोंग
करने के बाद अनील वकया जाएगा।
121. टे ट्यूब और टे बार पर लोड - स्टे ट्यूबो ों को, सपोटय वकए जाने िाले िेि पर प्रेशर के
कारण पड़ने िाले पूरे भार को िहन करने के वलए वडजाइन वकया जाएगा। प्रत्येक मामले में िेि का
पररकलन वनम्नानुसार होगा:
(i) ट्यूब नेस्ट के भीतर एक स्टे ट्यूब के वलए सपोटय वकया गया नेट िेि स्टे ट्यूब के वम.मी. में िैवतज और
िवटयकल वपचो ोंका गुणनफल होगा, वजसमें से इम्ब्रेस ट्यूब होल के िेिफल को कम वकया जाएगा। जहाों
स्टे ट्यूब की वपच अवनयवमत है, िहाों िेि को स्टे ट्यूब के माध्य वपच के िगय के रूप में वलया जाएगा
(अथायत चार आसन्न स्टे ट्यूबो ों से वघरे वकसी भी चतुभुयज की चार भुजाओ ों के योग के एक चौथाई का
िगय) वजसमें से इम्ब्रेस्ड ट्यूब होल के िेिफल को कम वकया जाएगा।
(ii) सीमािती पोंक्ति में स्टे के वलए सपोटय वकए जाने िाले वनिल िेि और सपोटय के आसन्न वबोंदुओ ों के बीच
में से गुजरने िाली रेखाओ ों से वघरा हुआ िेि होगा वजसमें से वकसी इम्ब्रेस्ड ट्यूब के िेऊ को कम वकया
जाएगा। सपोटय के आसन्न वबोंदु अन्य स्टे ट्यूब या सकय ल की कें द्र रेखा के फ्लैंजेज के किेचर की
शुरुआत में हो सकते हैं या एोंड प्लेट से शेल एोंगल को खोल कोण तक सुरवित करने िाले ररिेटटस हो
सकते हैं।
(iii) बार स्टे के मामले में जहाों ट्यूब नेस्ट में कोई स्टे ट्यूब नही ोंहै, सपोटय वकया जाने िाला िेि ट्यूब नेस्ट
की स्पशयरेखा सीमा तक विस्ताररत होगा।
भाग XI
122. बॉयलर और सुपरहीटर ट्यूबें आंतररक प्रेशर टील ट्यूबो ं के अध्यधीन हैं– (1) सभी
ट्यूबें जो पानी या भाप के आोंतररक प्रेशर के अधीन हैं, अध्याय -2 के अनुसार कोल्ड डरॉ या हॉट124 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वफवनश्ड सीमलेस या इलेक्तररक रेवजस्टेंस िेल्डेड होनी चावहए। नीचे वदए गए उप-अवधवनयम (2) में
वकए गए प्रािधान को छोड़कर िे वबना जोड़ के होगों े।
(2) 127 वम.मी. तक के बाहरी व्यास िाले ट्यूबो ोंको जोड़ा जा सकता है और ऐसे जोड़ो ोंको फ्लैश
िेल्ड, मशीन फोजय िेल्डेड आकय या गैस िेल्ड वकया जा सकता है। 127 वम.मी. से अवधक व्यास के
ट्यूबो ोंको भी िेल्ड वकया जा सकता है बशते िे फनेस के बाहर क्तस्थत हो।ों इस तरह के िेल्ड को अध्याय
-7 की आिश्यकताओ ोंके अनुरूप होना चावहए।
(3) फ्लैश बट िेक्तल्डोंग उवचत प्रवहृया के अनुसार की जाएगी। फ्लैश बट िेक्तल्डोंग के कारण होने
िाले बाहरी वफन को व्यास के बाहर की ट्यूब को अवधकतम 5 प्रवतशत ऊों चाई के अधीन हटा वदया
जाएगा। ट्यूब के आकार के नाममाि आोंतररक व्यास के 75% के वनकटतम बॉल व्यास का उपयोग
करके बॉल परीिण करके आिश्यक प्रिाह िेि सुवनवश्चत वकया जाएगा।
(4) सभी फ्यूजन िेल्डेड बट जोड़ो ों को विवनयम 123 में वनवदयष्ट स आिश्यकताओ ों के अनुसार पोस्ट
िेल्ड हीट टरीटेड वकया जाएगा।
(5) जब गैस िेक्तल्डोंग को शावमल वकया जाता है तो अपनाई जाने िाली तकनीक को सिम व्यक्ति
द्वारा अनुमोवदत वकया जाएगा।
(6) वडजाइन धातु तापमान और सामग्री आिश्यकताओ ों के वलए विवनयम 30 की तावलका 2/1
देखें।
(7) ट्यूबो ों के सभी फील्ड िेक्तल्डोंग में वनयोवजत तकनीक वनरीिण प्रावधकारी या मुख्य वनरीिक,
जैसा भी मामला हो, के अनुमोदन के अधीन होगी।
(8) ट्यूबो ोंके सभी बट िेल्ड का यथापेवित परीिण वनम्नानुसार वकया जाएगा:
(i) 178 वम.मी. बोर से अवधक के ट्यूब के वलए सभी िेल्ड का रेवडयोग्रावफक या अन्य अनुमोवदत
विवधयो ोंद्वारा नॉन वडस्टरक्तरि टेस्ट वकया जाएगा।
(ii) 102 वम.मी. बोर से अवधक और 178 वम.मी. तक बोर (178 वम.मी. सवहत) िाले ट्यूब के वलए
- प्रत्येक िेल्डर द्वारा 10 प्रवतशत िेल्ड, प्रवत िेल्डर न्यूनतम 2 िेल्ड के साथ यादृक्तच्छक रूप से चुने गए
िेल्ड, रेवडयोग्रावफक या अन्य अनुमोवदत तरीके द्वारा नॉन-वडस्टरक्तरि टेस्ट के अधीन होगों े।
(iii) 102 वम.मी. बोर और उससे कम बोर के ट्यूब के वलए - याोंविक परीिण के वलए उत्पादन
िेल्ड का अनुकरण करने िाला नमूना िेल्ड या तो 2 प्रवतशत की दर से या प्रत्येक 150 िेक्तल्डोंग घोंटे के
बाद न्यूनतम एक नमूना िेल्ड प्रवत िेल्डर वलया जाएगा।
(iv) िैकक्तिक रूप से, प्रत्येक िेल्डर द्वारा बनाए गए 5 प्रवतशत िेल्ड यादृक्तच्छक रूप से चुने
जाएोंगे, प्रवत िेल्डर न्यूनतम एक िेल्ड, रेवडयोग्रावफक या अन्य अनुमोवदत विवध द्वारा नॉन वडस्टरक्तरि
टेस्ट के अधीन होगों े। प्रारोंवभक सोंतो जनक पररणाम आने के बाद वनरीिण प्रावधकारी के साथ व्यिस्था
करके इस दर को घटाकर 2 प्रवतशत वकया जा सकता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 125
(v). वकसी भी नॉन वडस्टरक्तरि टेस्ट के अपेिाओ ों पर खरा उतरने की क्तस्थवत में, िेल्ड में उस
परीिण द्वारा दशायए गए दो ो ोंको ठीक वकया जाएगा और वनरीिण प्रावधकारी नॉन वडस्टरक्तरि
टेस्ट की सोंख्या में िृक्तद् की माोंग कर सकता है जब तक वक सोंतो जनक मानक हावसल न हो
जाए।
(9) उप-विवनयम (8) में इोंवगत बट िेल्डेड जोड़ रेवडयोग्रावफक, रेवडयोस्कोपी या अन्य अनुमोवदत
विवधयो ों जैसे फे र्ज् एरे अल्ट्रासॉवनक परीिण सवहत, अल्ट्रासॉवनक परीिण सवहत, मैग्नेवटक पावटयकल
वनरीिण या वलक्तिड डाई पेनेटरेशन वनरीिण सवहत नॉन वडस्टरक्तरि टेस्ट के अधीन होगों े। जब िेल्डेड
घटको ों पर रेवडयोग्राफी के स्थान पर रेवडयोस्कोवपक परीिा की जानी हो, तो वनम्नवलक्तखत
आिश्यकताओ ोंको पूरा वकया जाएगा, अथायतट: -
(क) वनरीिण प्रावधकारी के अनुमोदन के वलए एक वलक्तखत प्रवहृया प्रस्तुत की जाएगी वजसमें
वनम्नवलक्तखत शावमल होगों े:
(i) सामग्री और मोटाई की सीमा;
(ii) उपकरण की अहयता;
(iii) परीिण िस्तु स्कै न प्लान;
(iv) रेवडयोस्कोवपक पैरामीटर;
(v) इमेज प्रोसेवसोंग पैरामीटर;
(vi) इमेज वडस्प्ले पैरामीटर;
(vii) इमेज सोंग्रह अपेिाएों;
(viii वीकीकार-अवीकीकार सोंबोंधी मानदोंड (कोड सोंदभय);
(ix) प्रदशयन मूल्ाोंकन;
(x) ऑपरेटर की पहचान।
(ख) रेवडयोस्कोवपक इमेज की गुणित्ता बााने के वलए वसस्टम को एक इमेज प्रोसेसर लगाया जाएगा
और वसस्टम वनम्नवलक्तखत प्रदशयन गुणित्ता प्रदवशयत करेगी :-
(i) 3% की वथन सेक्शन कों टरास्ट सेंक्तस्टविटी;
(ii) 2% वथन सेक्शन कों टरास्ट सेंक्तस्टविटी;
(iii) प्रवत वम.मी. 3लाइन जोड़े स्पेररयल ररजाल्ूशन;
(iv) इमेज िावलवट सेंवसविटी(आईक्यूआई) सेंवसटीविटी - सोंयुि मोटाई का 2% जब िायर
आईक्यूआई का उपयोग वकया जाना है, तो तार व्यास अि प्रणाली की सबसे कम सेंस्टीविटी के अि
की ओर उन्मुख होना चावहए।
(ग) प्रस्तुत जोड़ के विशे भाग के साथ जोड़ने के वलए रेवडयोस्कोप को ठीक से वचव्त वकया
जाना चावहए।
(घ) रेवडयोस्कोवपक जाचों के आोंकड़ो ों को दजय वकया जाएगा और वनरीिण प्रावधकारी द्वारा वनवदयष्ट स
रेवडयोस्कोवपक परीिा की तारीख के बाद पयायप्त अिवध के वलए वनमायता के सोंयोंि में िीवडयो टेप,
चुोंबकीय वडस्क या ऑवप्टकल वडस्क जैसे उपयुि भोंडारण मीवडया पर पर सोंग्रवहत वकया जाएगा,
कु शल रेवडयोस्कोवपक परीिा ररकॉडय ररकॉल को ररकॉडय ररटेंशन अिवध में वकसी भी समय उपलब्ध
कराया जाएगा और परीिण िस्तुओ ोंके वलए पता लगाने योग्य होगा।126 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ङ) जब रेवडयोस्कोवपक परीिा के पररणामवीकरूप मरम्मत की जाती है, तो मरम्मत की प्रभािशीलता
का मूल्ाोंकन करने के वलए उसी रेवडयोस्कोवपक तकनीक का उपयोग करके मरम्मत वकए गए िेिो ों
की वफर से जाोंच की जाएगी।
(च) रेवडयोस्कोवपक परीिा डेटा की उवचत व्याख्या में सहायता के वलए, उपयोग की जाने िाली
तकनीक का वििरण डेटा के साथ होगा। कम से कम जानकारी में अनुमोवदत प्रवहृया आिश्यकताएाँ
और वसस्टम प्रदशयन परीिण डेटा शावमल होगा।
123. पोट िेल्ड हीट टरीटमेंट (पीडबल्ूएचटी) की आिश्यकताएं- पोस्ट िेल्ड हीट टरीटमेंट
(पीबीडब्ल्यूएच) की आिश्यकताएों तावलका 3/5 में दी गई हैं।
तावलका 3/5
हृम सं. सामग्री पीडब्ल्यूएचटी वनम्नवलल्पखत शतों के तहत पीडब्ल्यूएचटी की
समूह आिश्यकता नही ंहै:
(तावलका
2/1 के
अनुसार)
(1) (2) (3) (4)
1. (i) सभी उत्पाद फामय के वलए:
एम1 समूह 595°C (क) नाममाि िेल्ड मोटाई (t) ≤ 20 वम.मी. ;और
1, एम 1 अवधकतम (ख) अगर पहले से 95°C पर प्रीहीट है तो नाममाि िेल्ड
समूह 2 मोटाई(t) ≤ 20 वम.मी. और नाममाि बेस मेटल मोटाई <
25वम.मी. ;और
(ग) C ≤ 0.25%;
(ii) के िल ट्यूब और पाइप के वलए, अगर0.25% < C ≤
0.3% और नाममाि मोटाई≤ 9 वम.मी.; िेल्ड स्टे के मामले
में, स्टे के व्यास को प्रीहीट करने की आिश्यकताओ ों के
वनधायरण के वलए उपयोग नही ोंवकया जाता है।
2. (क) सभी उत्पाद फामय नाममाि िॉल मोटाई(t) ≤ 16
एम3 समूह 595°C वम.मी. ट्यूब और पाइप को छोड़कर t ≤ 13 वम.मी. &
1 अवधकतम ओडी ≤ 127 वम.मी.;और
(ख)सी ≤ 0.25%
3. (क) सभी उत्पाद रूपो ोंके वलए नाममाि बेस मेटल मोटाई
एम4 समूह 650°C t ≤ 16 ट्यूबो ोंऔर पाइपो ोंको छोड़कर टी ≤ 13 वम.मी.
1 अवधकतम और ओडी ≤ 127 वम.मी.; और
(b) सी≤ 0.15%; और
(c) प्रीहीट 120°C अवधकतम[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 127
4. (क) सभी उत्पाद रूपो ोंके वलए नाममाि बेस मेटल मोटाई
एम5ए 675°C t ≤ 16 ट्यूबो ोंको छोड़कर टी ≤ 13 वम.मी. और ओडी ≤
समूह 1 अवधकतम 127 वम.मी. और पाइप के वलए टी ≤ 13 वम.मी. और
और ओडी ≤ 127 वम.मी.; तथा
एम5बी (ख) सीआर ≤ 3%; और
समूह 1 (ग) सी ≤ 0.15%; और
(घ) प्रीहीट 150°C अवधकतम
5.
एम15 ई 730°C से शून्य
समूह1 785°C
6. शून्य
एम8 पीडब्ल्यूएचटी
: शून्य
7. पीएच: 250- शून्य
एमएक्स20 300°C
जीटीएब्ल्यू के
वलए और
400-450
एसएमएडब्ल्यू
पोस्टहीट के
वलए :80-
100°C 90
वमनट के वलए
न्यूनतम
पीडब्ल्यएचटी
: 740°C -
760°C
8. एमएक्स 12 पीएच:220°C शून्य
(t 52 पीडब्ल्यूएचटी:
वम.मी. तक) 725°C +/-
15°C
9. एम43 950°C (क) 540 वडग्री सेक्तियस से कम वडजाइन तापमान
अवधकतम के वलए
या
(ख) प्रेशर भाग में पररधीय बट िेल्ड के वलए वजसका
िेल्ड में 13 वम.मी. या कम नाममाि बेस मेटल मोटाई हो
वटप्पणी 1:
(क) सभी ताप प्रवहृया की रेंज योग्य िेक्तल्डोंग प्रवहृया के अनुसार होनी चावहए।128 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) जब भी िेल्ड द्वारा दो अलग अलग एम- सोंख्या के प्रेशर पाटटयस को जोड़ा जाता है, तो उच्चतर
पोस्ट िेल्ड ताप प्रवहृया तापमान की आिश्यकता िाले सामग्री आिश्यकताओ ों के वलए तावलका 3/5 के
अनुसार पोस्ट िेल्ड ताप प्रवहृया होती है, एम सों-8 समूह में िवणयत को छोड़कर।
(ग) ट्यूब या पाइप की मोटाई में एम सों- 4 या एम सों 5ए ट्यूब और पाइप से वनचले एम‐नोंबर
सामग्री के हेडर को सोंलग्न करते हुए वफक्तिट िेल्ड, आोंवशक पेवनटरेशन िेल्ड, पूणय पेवनटरेशन िेल्ड पोस्ट
की कम एम‐नोंबर सामग्री के वलए तावलका 3/5 में वनवदयष्ट स तापमान पर िेल्ड ताप प्रवहृया की जा सकती
है, बशते ट्यूब या पाइप वनम्नवलक्तखत सभी शतों का अनुपालन करते हो:ों
(i) 3.0% का अवधकतम विवशष्ट स हृोवमयम घटक
(ii) एनपीएस4(डीएन 100) का अवधकतम आकार
(iii) 13 वम.मी. की अवधकतम मोटाई
(iv) 0.15 तक अवधकतम विवशष्ट स काबयन घटक
(घ) जब नॉन प्रेशर पाटय को प्रेशर पाटय के साथ िेल्ड वकया जाता है, तब प्रेशर पाटय के पोस्ट िेल्ड
ताप प्रवहृया को वनयोंवित करेगा । प्रेशर पाटय िेल्ड और सोंलग्न िेल्ड जो ऐसे फे रीवटक वफलर मेटल
उपयोग करते हैं वजनमें 3% से अवधक विवशष्ट स हृोवमयम घटक होगा उन्हें पोस्ट िेल्ड ताप प्रवहृया से
गुजारा जाएगा। पोस्ट िेल्ड ताप प्रवहृया का समय और उपयोग वकया गया तापमान समकि विश्ले ण
की बेस मेटल के वलए तावलका 3/5 में दशायए गए तापमान से कम नही ोंहोगा।
(ङ) वनधायररत पोस्ट िेल्ड ताप प्रवहृया और सोवकों ग समय के वलए नाममाि मोटाई को वनम्नानुसार
वकया जाएगा:
(i) फु ल पेवनटरेशन बट िेल्ड के वलए, नाममाि मोटाई जोडे जाने िाले भागो ोंसे पतली है।
(ii) कॉनयर िेल्ड के वलए, नाममाि मोटाई िेल्ड की गहराई है।
(iii) पावशययल पेवनटरेशन ग्रूि और सामग्री की मरम्मत िेल्ड के वलए, नाममाि मोटाई िेल्ड की
गहराई है। दोनो ों तरफ से बने पावशययल या फु ल पेवनटरेशन ग्रूि िेल्ड की कु ल गहराई वकसी वदए गए
स्थान पर दोनो ोंतरफ की गहराई का योग होगी।
(iv) वफलेट िेल्ड के वलए, नाममाि मोटाई िेल्ड मागय के बराबर है। जब एक ग्रूव्ड िेल्ड के साथ
एक वफलेट िेल्ड का उपयोग वकया जाता है, तो नाममाि मोटाई या तो ग्रूव्ड िेल्ड की गहराई या वफलेट
मागय के पररमाप, जो भी अवधक हो के बराबर होगी।
(v) नीचे वदए गए खोंड (vi) में वनधायररत के अलािा, नाममाि मोटाई ग्रूि की गहराई है, यवद मौजूद
है, शेल या नोजल या मजबूत पैड, या वकसी वफलेट िेल्ड मागय के माध्यम से, जो भी अवधक हो, के
माध्यम से।
(vi) जब कई ओपवनोंग एक वलगामेंट बनाते हैं जहाों कें द्रो ों के बीच की दूरी औसत व्यास के दोगुने
से कम होती है, तो सोंयोजन नाली और वफलेट िेल्ड की नाममाि मोटाई, नाली की गहराई और वफलेट
िेल्ड मागय का योग होगी।
(vii) बट िेल्ड के मामले में, प्रेशर पाटय की मोटाई सोंलग्न वबोंदु पर जहाों प्रेशर पाटय को एक नॉन
प्रेशर पाटय िेल्ड से वकया जाता है;
(viii) वफलेट िेल्ड के मामले में, सोंलग्न वबोंदु पर वफलेट िेल्ड की मोटाई जहाों एक नॉन प्रेशर पाटय
को प्रेशर पाटय में िेल्ड वकया जाता है।
(च) जब एम 1 और एम 3 सामग्री के वलए तावलका 3/5 में वनवदयष्ट स तापमान पर पीडब्लूएचटी
करना अव्यािहाररक हो, तो नीचे दी गई तावलका 3/6 के अनुसार लोंबे समय तक पीडब्लूएचटी को
कम तापमान पर करने की अनुमवत है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 129
तावलका 3/6: काबषन और लो एलाय टील के वलए िैकल्पिक पीडब्ल्यूएचटी आिश्यकता
हृम सों. न्यूनतम वनवदयष्ट स तापमान से नीचे तापमान में कमी, °C न्यूनतम होक्तल्डोंग समय नोट
(नोट (1)) घटे हुए तापमान
पर, घोंटा
(1) (2) (3) (4)
1. 28 2 -
2. 56 4 -
3. 83 10 (2)
4. 111 20 (2)
वटप्पणी:
(1) मोटाई के वलए प्रवत 25 वम.मी. के वलए न्यूनतम होक्तल्डोंग समय और 50 वम.मी. सवहत 50 वम.मी.
तक। 50 वम.मी. से अवधक मोटाई के वलए प्रवत 25 वम.मी. मोटाई के वलए 15 वमन. जोड़ा जाता है।
(2) ये लॉअर पोस्ट िेल्ड हीट टरीटमेंट तापमान के िल एम- सों 1 ,समूह1 और 2 सामग्री के वलए अनुमत
है।
(छ) हीवटोंग के दौरान सोवकों ग/ एसआर (अथिा पीडब्लूएचटी) नीचे वदए गए वदशा वनदेशो ों के अनुसार
होना चावहए:
तावलका 3/7: सोवकं ग
हृम सं. एचटी साइकल सोवकं ग समय वटप्पणी
(1) (2) (3) (4)
1. हॉट िवकिं ग / एम5बी, एम-15ई ग्रेड1 (पी91) के
नॉमयलाइवजोंग वलए: 30 वमनट "t" के प्रवत 25 ‘t’ स्टरेस ररलीविोंग के वलए
वम.मी. हेतु या 30 वमनट न्यूनतम जो उत्पाद मोटाई है
भी अवधक हो और अन्य सभी के
वलए 30 वमनट "t" के प्रवत 25
वम.मी. या 15 वमनट न्यूनतम जो भी
अवधक हो।
2. एसआर/ पीडब्ल्यूएचटी- 50 वम.मी. से ऊपर प्रत्येक 25 ‘t’ नॉवमनल मोटाई है,
काबयन स्टील वम.मी. के वलए अवतररि 15 वमनट पीडब्ल्यूएचटी की तावलका
के साथ 50 वम.मी. तक ‚t‛ के वलए 3/5 के नोट (ख) के अनुसार।
‚t‛ के प्रवत 25 वम.मी. हेतु 1 घोंटे
(न्यूनतम 15 वमनट)।
3. एसआर/ पीडब्ल्यूएचटी- नीचे उक्तिक्तखत न्यूनतम सोवकों ग130 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
एलॉय स्टील समय के साथ ‚t‛ के प्रवत 25 वम.मी.
हेतु 1 घोंटा:
(एम3 और एम4)- 30 वमनट
न्यूनतम
(एम5ए) – 127 वम.मी. और इससे
कम ओडी और 13वम.मी. और
इससे कम t के एम5ए पाइप को
छोड़कर न्यूनतम 60 वमनट, वजसमें
के िल 30 वमनट की आिश्यकता
होती है)
(एम5बी और एम-15 ई ग्रेड1)-60
वमनट न्यूनतम
4. एमएक्स20 60 वम.मी. से कम मोटाई के वलए
न्यूनतम 2 घोंटे और 60 वम.मी. से
अवधक मोटाई के वलए न्यूनतम 3
घोंटे
5. एमएक्स12 (52 वम.मी. t के 25 वम.मी. के वलए 1 घोंटा-30
तक t) वमनट न्यूनतम
6. एसआर/ पीडब्ल्यूएचटी- T के 25 वम.मी. के वलए 1 घोंटा-60
वनकल एलॉय वमनट न्यूनतम
(ज) फनेस का तापमान एसआर/ पीडब्ल्यूएचटी के वलए घटको ों को रखने के समय 425°C से अवधक
नही ोंहोना चावहए। घटक एसआर/ पीडब्ल्यूएचटी तापमान पर न्यूनतम सोवकों ग समय पर रखा जाएगा।
एसआर/ पीडब्ल्यूएचटी के बाद घटक को फनेस में ठोंडा करने के वलए तापमान 425°C से अवधक में
नही ोंहोना चावहए। फनेस से वनकालने के बाद उस भाग को शाोंत िातािरण में ठोंडा होने देना चावहए।
(झ) 425°C से अवधक गमय करने की दर और 425°C तक ठोंडा करने की दर नीचे वदए अनुसार
होगी। मोटाई से इोंच में विभावजत करके गमय करने की दर और ठोंडा करने की दर 335°C से अवधक
नही ोंहोनी चावहए, लेवकन वकसी भी मामले में यह 335°C प्रवत घोंटे से अवधक नही ोंहोनी चावहए।
वटप्पणी 2:
(i) काबयन स्टील पाइप, िाल्व और वफवटोंग के वलए सॉके ट िेल्डेड जोड़ो ोंया अन्य प्रकार के जोड़ो ों
के मामले में, पीडब्लूएचटी की आिश्यकता नही ोंहै, यवद वफलेट िेल्ड के मागय की मोटाई 20 वम.मी. से
अवधक नही ोंहै या काबयन सामग्री 0.25% से अवधक नही ोंहै।
(ii) काबयन स्टील हेडर और िॉटर ट्यूब के मड बॉक्स के वलए, सामग्री वजसमें 0.25% तक
न्यूनतम काबयन तत्व हो, हेडर के ट्यूब िेल्ड के वलए पोस्ट िेल्ड हीट टरीटमेंट की आिश्यकता अवनिायय
नही ोंहै यवद वनम्नवलक्तखत सारी शतों को पूरा वकया जाता है नामत:
(क) ट्यूब का बाहरी व्यास(ओडी)51 वम.मी. से अवधक न हो
(ख) हेडर का बाहरी व्यास 219.1 वम.मी. से अवधक न हो[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 131
(ग) हेडर की मोटाई 13 वम.मी. से अवधक नही ोंहोनी चावहए
(घ) 100 °C की न्यूनतम प्री-हीट उपयोग की जाए
(iii) काबयन स्टील के वलए, यवद बॉयलर की छोटे घटको ों की मोटाई 20 वम.मी. से अवधक है और
िेल्ड रीसैस भी लोकल स्टरैस ररलीविोंग 20वम.मी. से अवधक है तो इस सोंबोंध में वनरीिण प्रावधकारी के
सोंतुष्ट स होने पर इसकी अनुमवत होगी।
(iv) काबयन स्टील और लो एलॉय स्टील के िेल्ड जोडो ों में पोस्ट-िेल्ड हीट टरीटमेंट में छू ट दी जा
सकती है जब हीट टरीटमेंट व्यािहाररक न हो जहाों आोंतररक भाग को स्पेशल स्टील के साथ लाइन
वकया जाता है वजसे 400°C से अवधक गमय नही ोंवकया जा सकता है (इस कारण तापमान के बाने के
दौरान ऐसी लाइवनोंग के सोंिारण गुणो ों में कमी के वलए सोंबोंवधत समस्ा के कारण), जब वनम्नवलक्तखत
सभी शतों को पूरा वकया गया हो:
(क) वबल्ट्-अप ओिरले िेक्तल्डोंग (एक साथ िेल्ड करने के वलए क्लोवजोंग जॉइोंट के वहस्सो ों के दोनो ों
िेक्तल्डोंग एज बेिल पर बटररोंग की जाती है। यह बटररोंग वनम्नवलक्तखत की हो सकती है:
(1) लो काबयन (C) के साथ काबयन स्टील इलेररोड=0.1 प्रवतशत अवधकतम (उदाहरण ई-7018-
1) काबयन स्टील भाग के मामले में।
(2) स्टेनलेस स्टील इलेररोड ई-309 के साथ या एलॉय स्टील भाग के मामले में इनकोनेल
इलेररोड के साथ
(3) कम वमश्र धातु स्टील इलेररोड के साथ, काबयन (सी) = 0.12 प्रवतशत अवधकतम या उच्च
शक्ति िाले कम वमश्र धातु स्टील भागो ों के मामले में इनकोनेल इलेररोड के साथ 56 वकग्रा/िगय वम.मी.
से अवधक यूटीएस िाले जैसे डब्ल्यूबी36, एसए 533 टाइप B Cl 2;
(ख) बटररोंग की मोटाई उस तरफ न्यूनतम 15 वम.मी. होनी चावहए जहाों पुन: िेक्तल्डोंग से पहले वचप
बैक की आिश्यकता होती है और दूसरी तरफ न्यूनतम 8 वम.मी. होनी चावहए। नीचे वदए गए वचि का
सोंदभय लें:
वचि 3/11
(ग) उवचत प्री-हीट और अन्य पास वहवटोंग का बटररोंग के दौरान उपयोग वकया जाता है:
(घ) विशे स्टेनलेस स्टील जोंग प्रवतरोधी लाइनर प्लेट को िेक्तल्डोंग करने से पहले या विशे जोंग
प्रवतरोधी स्टेनलेस स्टील लाइवनोंग के अोंवतम िेल्ड ओिरले का प्रयोग करने से पहले बटररोंग के बाद
अलग-अलग वहस्सो ोंको पोस्ट-िेल्ड हीट टरीट वकया जाता है।
(ङ) आोंतररक लाइन साइड सोंबोंधी अोंवतम लेयर, लाइनर सामग्री के अनुकू ल होनी चावहए और
बेस मेटल साइड शेल पर अोंवतम िेल्ड (काबयन स्टील बेस मेटल में काबयन स्टील िेक्तल्डोंग, उच्ची िमता
िाले लो एलॉय स्टील मेटल के मामले में लो एलॉय स्टील इनकोनेल िेक्तल्डोंग और अन्य लो एलॉय स्टील
बेस मेटल के मामले में ई309 इनकोनेल िेक्तल्डोंग) अनुरूप याोंविक विशे ताएों के सोंबोंध में बेस मेटल के
अनुरूप होगी। िेक्तल्डोंग प्रवहृया को पयायप्त कठोरता और लचीलेपन और वनरीिण प्रावधकारी या मुख्य
वनरीिक, जैसा भी मामला हो, द्वारा अनुमोवदत प्रवहृया का ध्यान रखते हुए स्थावपत वकया जाएगा;
(च) चापी–V नोच इम्पैर टेस्ट 20°C पर वकया जाता है132 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(I) बेस मेटल और हीट अफरेड जोन
(II) काबयन स्टील िेक्तल्डोंग के मामले में िेल्ड मेटल
(छ) वनम्नानुसार नॉन-वडस्टरक्तरि परीिण (अनुशोंवसत):
(i) बटररोंग करने से पहले िेल्ड बेिेल का चुोंबकीय कण परीिण।
(ii) बटररोंग परत का डाई-पेनेटरेंट परीिण।
(iii) बाकी िेल्ड का डाई-पेनेटरेंट टेस्ट।
(iv) आोंतररक लाइनर की तरफ अोंवतम िेल्ड का डाई-पेनेटरेंट परीिण।
(v) क्लोवजोंग सीम के साथ उपकरण के हाइडरो परीिण के बाद अोंवतम िेल्ड का अल्ट्रासॉवनक
परीिण।
124. टील ट्यूब का संयोजन - (1) वनम्नवलक्तखत में से वकसी एक तरीके से स्टील ट्यूबो ों को ट्यूब
प्लेटो ोंसे जोड़ा जाएगा: -
(i) एक्सपैंडेड
(ii) स्टरैन्थ िेक्तल्डोंग
(iii) मेकै वनकल बाल्ट्ेड बॉल जॉइन्ट
(2) वडरफ्ट या रोलर एक्सपैंडेड ट्यूब 25 वम.मी. के चौथाई के द्वारा नेक या होल के वबयररोंग पाटय से
बाहर वनकले होगों े और 1.6 वम.मी. प्लस व्यास में प्रत्येक 25 वम.मी. के वलए 0.8 वम.मी. तक के वलए
बेल माउथ के द्वारा उन्हें बाहर वनकलने से सुरवित वकया जाएगा।
(3) बॉयलर और सुपर हीटर दोनो ोंके वलए ट्यूबो ोंको वफवटोंग या हेडर में सील िेल्ड वकया जा सकता है,
जब उनका विस्तार और फ्लेयर वकया गया हो, बशते वफवटोंग या हेडर में सामग्री में 0.35 प्रवतशत से
अवधक काबयन न हो।
(4) वडरफ्ट और रोलर एक्सपैंडेड ट्यूब के मामले में , डरम, पॉके ट या हेडर के ट्यूब प्लेट में ट्यूब होल
ऐसे तरीके से बनाया जाएगा वक ट्यूब कु शलता से उसमें कस वदया जाए। जहाों ट्यूब एोंड ट्यूब प्लेट के
वलए नॉमयल नही ोंहै, िहाों कम से कम 13 वम.मी. की गहराई के समानाोंतर सीवटोंग की एक नेक या बेल्ट्
होनी चावहए, जो वक होल पर ट्यूब की धुरी के प्लेन नॉमयल से मापी जाए।
(5) जहाों ट्यूब को मजबूती से ट्यूब प्लेट से िेल्ड वकया जाता है, अपनाई जाने िाली तकनीक को
वनरीिण प्रावधकारी के द्वारा अनुमोवदत वकया जाएगा और सभी िेल्ड को उवचत हीट-टरीट वकया
जाएगा। 22 वम.मी. से कम मोटाई की प्लेट के मामले में, ट्यूब के िेल्ड के बाद हीट टरीटमेंट के द्वारा
स्टरैस ररलीविोंग की आिश्यकता के सोंबोंध में छू ट दी जा सकती है बशते िेल्ड अवधकतम कठोरता की
अपेिाओ ों और िेल्ड धातु के प्रभाि मूल्ो ों से सोंबोंवधत आिश्यकताओ ों को पूरा करता हो। अपनाई गई
िेक्तल्डोंग प्रवहृया और चयवनत िेल्ड अनुहृम भी वनरीिण प्रावधकारी के अनुमोदन के अधीन होगों े। यह
प्रािधान के िल मैन्युफै क्चरसय िक्सय में ट्यूबो ोंकी शॉप िेक्तल्डोंग पर लागू होता है।
(6) ट्यूब स्पेसर, सपोवटिंग क्तक्लप और लग्स को ट्यूब में िेल्ड वकया जा सकता है। ररफ्रै ररीज आवद को
सपोटय करने के वलए स्टड की फ्लैश िेक्तल्डोंग की भी अनुमवत है।
(7) ट्यूबो ोंको इस तरह व्यिक्तस्थत वकया जाएगा वक िे आोंतररक और बाहरी सफाई के वलए सुलभ
हो।ों[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 133
भाग XII
125. िॉटर ट्यूब बॉयलर के हेडर, मड बाक्स आवद (1) (क) हेडर और मड बाक्स आवद
विवनयम 49 से 57 में वनवहत प्रािधानो ों की आिश्यकता के अनुरूप सीमलेस या िेल्ड स्टील या कास्ट
स्टील के हो सकते है। जहाों िेल्ड करते हैं, िेल्ड को स्टरैस ररलीि वकया जाएगा, उनकी रेवडयोग्राफी या
अलटरासोवनक रूप से जाोंच होगी और सभी तरह से विवनयम 123 की तावलका 3/5 के अनुसार
वनरीिण प्रावधकारी की सोंतुवष्ट स के अनुसार होगा।
(ख) सीमलेस स्टील ट्यूब हेडर के खुले वसरो ों को फोवजिंग द्वारा बोंद वकया जा सकता है या वसरो ों को
अनुमोवदत तरीके से बोक्तल्ट्ोंग, स्क्रू इोंग या िेक्तल्डोंग द्वारा सुरवित वकया जा सकता है। बोक्तल्ट्ोंग का उपयोग
नही ोंवकया जाना चावहए जहाों बोल्ट् दहन के गैसो ोंके सोंपकय में आते हैं या उनके द्वारा घुमाया जाता है।
(ग) वसरो ों की सोंयोजन की विवध वसरो ों के अधीन होगी, वनरीिण प्रावधकारी के अनुमोदन के अधीन
होगी।
(2) वफट वकए जाने से पहले प्रत्येक वहस्सा, बॉयलर वजसमें इसे वफट वकया जाना है के वडजाइन
प्रेशर के डेा गुना हाइडरोवलक परीिणो ोंसे गुजारा जाएगा।
(3) (क) साइवटोंग होल्ड डोर और हेडर कै प मजबूत होना चावहए और सुरिा का
कु शलता में कमी लाए वबना समय-समय पर हटाया या बदला जाना चावहए। िे बोल्ट् या सील िेक्तल्डोंग
द्वारा वकसी भी तरीके से अपनी क्तस्थवत में रखा जा सकता है।
(ख) वजन बोल्ट्ो ोंसे उन्हें जगह में रखा जाता है, उन्हें इस तरह से वफट वकया जाएगा वक उपरोि
शतों को पूरा वकया जा सके ।
(ग) दरिाजे इस तरह से वडजाइन वकए जाने चावहए वक बोल्ट् के टूटने की क्तस्थवत में िे फटे नही।ों
(घ) इवलवप्टकल होि के अवतररि सरकु लर होि भी प्रदान कर सकते है, जोड़ को सुरवित
करते समय दरिाजे के बोल्ट् को मुड़ने से रोकने के वलए प्रािधान वकया जाता है।
(4) सभी फ्लैंग्ज में कियचर की विज्या के साथ कम से कम नेक की मोटाई के बराबर एक वफलेट
होगी वजससे िे जुड़े हुए हैं।
भाग – XIII
126. टैंड पाइप और पैड स आवद - के रीइोंग माउोंवटोंग के वलए स्टैंड पाइप और सीवटोंग रॉट,
फे विके टेड स्टील से बने कास्ट के होने चावहए। ये शॉटय स्टैंड पाइप्स, प्रेस्ड स्टील प्लेट सैडल, फोर्ज्य पैड
या राउोंड रोल्ड बार से कटे पैड के रूप में होगों े जो िेक्तल्डोंग द्वारा बॉयलर के वलए सबसे सुविधाजनक
और सुरवित हो सकते हैं। जहाों शॉटय स्टैंड पाइप का उपयोग वकया जाता है, िे ठोस फोर्ज्य, फे विके टेड
या कास्ट स्टील के होने चावहए। अटैचमेंट से पहले उन्हें सािधानी से शेल में वबठाया जाएगा। जुड़ने
िाले भाग वजन पर माउोंवटोंग को बोल्ट् वकया जाना है, मशीनीकृ त वकया जाएगा। पैड में पयायप्त मोटाई
होनी चावहए तावक माउोंवटोंग के वलए स्टड होल की वडरवलोंग वबना आोंतररक सतह को बेवधत वकए सोंभि
हो सके और पैड में स्टड के स्क्रू िाले वहस्से की लोंबाई स्टड के व्यास से कम नही ोंहोनी चावहए।
127. टैंड पाइप का वडजाइन - िाोंच और स्टैंड-पाइप का वडजाइन को वनम्नवलक्तखत तरीके
से विवनयवमत वकया जाएगा :134 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(i) अवधकतम वीकीकायय कामकाजी प्रेशर का सामना करने के वलए, िाोंच और स्टैंड-पाइप की न्यूनतम
मोटाई विवनयमन 217 के उप-विवनयम (क) में वनवदयष्ट स प्रािधानो ोंके अनुसार वनधायररत की जाएगी;
(ii) मेन प्रेशर पाटय में ओपेवनोंग के वलए आिश्यक िवतपूवतय विवनयम 179 के प्रािधान के अनुसार वनधायररत
की जाएगी;
(iii) अवतररि मोटाई को पाइप-कायय या वफवटोंग को जोड़ने के कारण सुपरइम्पोर्ज् लोवडोंग का सामना पर
विचार वकया जाएगा।
(iv) िाोंच या स्टैंडपाइप की न्यूनतम मोटाई िह होगी जो उपरोि अपेवित मान में सबसे बड़ी हो और
0.015 d॰ प्लस 3.2 वम.मी. से कम नही ोंहोनी चावहए जहाों d॰ िाोंच का बाहरी व्यास (वम.मी. में) है।
बशते वक विवनयमो ों के प्रािधान ऐसे ट्यूब स्टब पर लागू नही ों होगों े वजन्हें ट्यूब के रूप में
नावमत वकया गया है।
128. प्रेड प्लेट सैडल - जहाों प्रेस्ड प्लेट सैडल रखे जाते हैं उन्हें बॉयलर के वनकट बेड वकया
जाएगा, और माउोंवटोंग के फे स ज्वाइोंवटोंग और वसरो ों को मशीन वकया जाएगा। माउोंवटोंग के सोंयोजन के
वलए स्टड यवद सैडल के माध्यम से स्क्रू वकए जाते हैं, तो प्रत्येक को स्टड के व्यास के बराबर मोटाई
िाले को अोंदर की तरफ एक नट के साथ वफट वकया जाएगा। जहाों स्टड होल सैडल के माध्यम से
पेनेटरेट नही ों करते हैं, प्लेट में स्टड के स्क्रू िाले वहस्से की लोंबाई स्टड के व्यास से कम नही ों होनी
चावहए।
129. मांउवटंग के वलए सीवटंग्स – (1) 8.7 वकग्रा/िगय सेमी (g), से अवधक के प्रेशर के वलए,
स्क्रू वसरो ोंिाले माोंउवटोंग जो एस.पी.टी(स्टरेट पाइप थ्रेडटस) में 1 इोंच से अवधक नही ोंहोगों े; ऐसी वकसी
माउवटोंग का स्क्रू वकया गया वहस्सा 5 वम.मी. से कम नही ोंहोना चावहए।
(2) माोंउवटोंग को वनम्नानुसार स्क्रू वकया जा सकता है:
क. सीधे बॉयलर शेल प्लेट में, पानी की तरफ नट वफट वकया जा रहा है या
ख. स्टील वडस्टैंस वहस्सो ों में लगे थ्रेड की लोंबाई वकसी भी मामले में माउोंवटोंग प्लस 6 वम.मी. के बोर से
कम नही ोंहोती है।
(3) वडस्टेन्ऱ वहस्सो ों को सॉवलड माइल्ड स्टील के बनाए जाने चावहए। िे प्लेट में स्क्रू होने चावहए
और पानी की तरफ से नट के साथ वफट होने चावहए। वडस्टेन्ऱ पीसेज की दीिार थ्रेड के तल में 6
वम.मी. मोटाई से कम नही ोंहोनी चावहए।
130. मांउवटंग का संयोजन - (1) माउोंवटोंग को सीधे वकसी भी शेल या एोंड प्लेट से जोड़ा जा
सकता है जहाों प्लेट बॉयलर माउोंवटोंग के सोंयोजन के वलए उपयुि सतह प्राप्त करने की अनुमवत देने
के वलए पयायप्त मोटाई की है।
(2) शेल या एोंड प्लेट में होल की न्यूनतम मोटाई प्लेट को अभेद्य मानते हुए अवधकतम अनुमेय
िवकिं ग प्रेशर के वलए आिश्यक मोटाई से कम नही ोंहोनी चावहए।
(3) जहाों बॉयलर माउोंवटोंग स्टड द्वारा सुरवित हैं, स्टड में कम से कम एक व्यास के वलए प्लेट में
एक पूरी थ्रेड होक्तल्डोंग होनी चावहए। अगर स्टड होल प्लेट की पूरी मोटाई को पेवनटरेट करते हैं। स्टड
को ठीक प्लेट एोंड के माध्यम से स्क्रू कर वदया जाएगा, वजसे स्टड के व्यास के बराबर की मोटाई के[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 135
एक नट के साथ वफट वकया जाएगा। जहाों बोल्ट् का उपयोग माउोंवटोंग को सुरवित करने के वलए वकया
जाता है, िहाों उन्हें शेल या एोंड प्लेट के अोंदर उनके हेड के साथ ठीक प्लेट से स्क्रू कर वदया जाएगा।
131. एंड प्लेट की अपयाषप्त मोटाई - (1) ऐसे मामलो ों जहाों एोंड प्लेट की मोटाई इस
उद्देश्य के वलए अपयायप्त है, माउोंवटोंग को विवनयम 126 में वदए गए प्रािधान के अनुसार उवचत स्टील
सीवटोंग को जोड़ा जाएगा।
(2) शेल और एोंड प्लेटटस से जुड़े स्टैंड पाइप के सोंबोंध में वनम्नवलक्तखत वनमायण की अनुमवत होगी:
(i) जहाों स्टैंड पाइप का आोंतररक व्यास 25 वम.मी. से अवधक नही ोंहै, स्टैंडपाइप को प्लेट में स्क्रू
वकया जा सकता है और िाटरसाइड पर एक नट के साथ लगाया जा सकता है।
(ii) जहाों स्टैंडपाइप का आोंतररक व्यास 25 वम.मी. से अवधक है लेवकन 51 वम.मी. से अवधक नही ों
है, िहाों इसे स्क्रू और सील-िेल्ड वकया जा सकता है।
(iii) जहाों स्टैंड पाइप का व्यास 51 वम.मी. से अवधक है, इसे एोंड प्लेट में िेल्ड वकया जा सकता है।
(3) स्टैंड पाइप के बारे में पूियगामी प्रािधानो ों को वनम्नवलक्तखत शतों से विवनयवमत वकया
जाएगा:
(i) जब स्टैंड पाइप को स्क्रू वकया जाता है, स्क्रू इोंग स्टैंडडय पाइप थ्रेड का होना चावहए,
(ii) जहाों स्टैंड पाईप, सैडल या सीवटोंग की अन्य फॉमय को फ्यूशन िेल्ड के द्वारा फे िीके टेड हैं
उन्हें बॉोंयलर के सोंयोजन से पहले हीट टरीटमेंट के द्वारा स्टरेस ररलीि वकया जाएगा
(iii) जहाों स्टैंड पाइप या सीवटोंग का बोर और प्लेट का होल 127 वम.मी. प्लस प्लेट की मोटाई के
दोगुने से अवधक नही ोंहै, सीवटोंग को, इस तरह के िेल्ड के बाद के हीट टरीटमेंट के वबना प्लेट में िेल्ड
वकया जा सकता है। जहाों स्टैंड पाइप या सीवटोंग का बोर और प्लेट में होल 127 वम.मी. प्लस प्लेट की
मोटाई के दोगुने से अवधक नही ों है, िहाों वजस प्लेट से सीवटोंग जुड़ी हुई है उसे हीट टरीटमेंट के द्वारा
स्टरैस ररलीि वकया जाएगा।
132. पानी और प्रेशर गेज का संयोजन - पानी और प्रेशर गेज साइफन को पैड या स्टैंड पाइप
के हस्तिेप के वबना फ्रों ट एोंड प्लेट के सीधे सोंयोजन से जोड़ा जा सकता है, बशते िे स्टड के द्वारा
फ्लैंज और सुरवित हो। यवद स्टड प्लेट के माध्यम से स्क्रू वकया गया है, तो नट को प्लेट के अोंदर वफट
वकया जाएगा।
133. फ्लैट थानो ंपर माउंवटंग - जहाों फ्लैंर्ज् माउोंवटोंग एक फ्लैट प्लेट से सीधे जुड़े होते हैं, ऐसे
माउोंवटोंग में पयायप्त क्तस्पगोट, बॉयलर प्लेट की पूरी मोटाई होनी चावहए।
134. बोल्ट और नट स - बोल्ट् और नट को मशीनीकृ त वकया जाएगा जहाों िे फ्लैंग्ज के
सोंपकय में आते हैं, और सैडल और पैड में सभी होल वडरल वकए जाएोंगे।136 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वटप्पणी: सभी मामलो ों में जहाों बॉयलर को माउोंवटोंग के जोड़ पर लैग वकया जाता है लैवगोंग
सतह साफ होना चावहए या लैवगोंग को फ्लैंज से साफ रखा जाना चावहए तावक जोड़ का वनरीिण वकया
जा सके और जब आिश्यक हो, वफर से बनाया जा सके ।
भाग XIV
135. मेनहोल, मडहोल आवद - (1)कु शल वनरीिण और सफाई की अनुमवत देने के वलए पयायप्त
दृवष्ट स और सफाई छेद प्रदान वकए जाएोंगे। इस तरह के छेद सामान्य रूप से अण्डाकार रूप में होगों े
और 89 वम.मी. x 63 वम.मी. से कम नही ोंहोगों े।
(2) बेलनाकार शेल के ऊपरी भाग में या शेल हृाउन, या एोंड प्लेट में कम से कम एक
मैनहोल या साइट होल प्रदान वकया जाना चावहए और यह तावलका 3/8 में दशायए गए से कम नही ोंहोगों े:
तावलका 3/8
हृम सों. आकार
(वम.मी. में)
1. बॉयलर 760 वम.मी. से अवधक नही ों 230 x 180
2. बॉयलर 760 वम.मी. व्यास से ऊपर और 915 वम.मी. से अवधक नही ों 305 x 230
3. बॉयलर 915 वम.मी. व्यास से ऊपर और 1060 वम.मी. से अवधक नही ों 355 x 255
4. बॉयलर 1060 वम.मी. व्यास से ऊपर और 1220 वम.मी. से अवधक नही ों 380 x 280
5. बॉयलर 1220 वम.मी.से ऊपर 410x305
(3) जहाों बॉयलर के वनमायण का आकार सफाई और वनरीिण के वलए प्रिेश की अनुमवत नही ों
देता है, इन उद्देश्यो ोंके वलए शेल में पयायप्त सफाई होल प्रदान कराए जाएोंगे।
(4)जहाों िवटयकल बॉयलरो ों में हृॉस ट्यूब लगाए गए हैं, िहाों प्रत्येक ट्यूब के कम से कम एक वसरे के
सामने एक सफाई होल प्रदान वकया जाएगा। सोंकीणय जल स्थानो ों के तल पर कम से कम तीन सफाई
होल उपलब्ध कराए जाने चावहए। सफाई होि को इस प्रकार व्यिक्तस्थत वकया जाएगा वक उनके बीच
की पररधीय दूरी 91 सेमी से अवधक न हो जब तक वक फॉउोंडेशन ररोंग बॉयलर के अोंदर से सफाई और
वनरीिण की अनुमवत के वलए पयायप्त रूप से सुलभ न हो।
वटप्पणी: जहाों भी व्यािहाररक हो, फ्रे म को शेल के अोंदर इस तरह सुरवित वकया जाना
चावहए वक शाटयर एक्तक्सस बॉयलर की अनुदैर्घ्य मध्य रेखा के समानतर हो।
(5) लोको टोप बॉयलर में सफाई होि या मड होि बाहरी फायरबॉक्स के वसोंग के तल के प्रत्येक
कोनो ों में, फायरहोल ररोंग के ऊपर और बैरल के तल की सीध में सैडल प्लेट के प्रत्येक वकनारे पर
प्रदान वकए जाएोंगे।
(6) छोटे बॉयलरो ों के मामले में या जहाों पूियगामी प्रािधान अव्यािहाररक हैं, सफाई होल या मड होल
बाहरी फायरबॉक्स आिरण के कोने के वजतना सोंभि हो उतना वनकट होना चावहए और होल उतना ही
बड़ा होना चावहए वजतनी की पररक्तस्थवतयाों अनुमवत देती हो।ों
136. शेल में ओपवनंग के वलए िवतपूरक ररंग और फ्रे म - (1) शेल में ओपवनोंग के वलए
िवतपूरक ररोंग और फ्रे म उसी साम्रागी के होने चावहए वजसका शेल बना हुआ है। प्रदान की गई
िवतपूवतय मुख्यतः फ्लैंर्ज् फ्रे म होगा, जो उन सभी के सेज में लगाया जाएगा जहाों शेल प्लेट 14 वम.मी. से[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 137
अवधक मोटी हो। फ्लैंर्ज् फ्रे म कम िेल्ड वकया जाना चावहए और किर के वलए एक फ्लैट ज्वाइोंवटोंग
सतह प्रदान करने के वलए फ्लैंज या प्रेस वकया जाना चावहए।
(2) सभी िवतपूरक ररोंग और फ्रे म जोड़े जाने िाली सतहो ोंको वनकटता से बेड करने के वलए बनें होगों े।
उसमें वकया गया कोई भी िेल्ड अनुप्रस्थ मध्य रेखा पर होगा।
(3) सभी फ्लैंर्ज् या प्रेस वकए गए फ़्रे मो ों और सभी दरिाजो ों या किरो ों की फ्लैट ज्वाोंइवटोंग सतहो ों को
मशीनीकृ त वकया जाएगा
137. आंतररक दरिाजे - आोंतररक दरिाजे अध्याय-2 के अनुसार रॉट स्टील के होगों े और उनका
वनमायण वनम्नानुसार होगा:-
(1) दरिाजे आोंतररक जोड़ सतह के साथ वनकटता से वफट होने के वलए बनाया होना चावहए और स्टड,
नटटस और हृॉसबार के साथ वफों ट होना चावहए;
(2) 250 वम.मी. से बड़े या 250 वम.मी. x 175 वम.मी. से बड़े िृत्ताकार ओपवनोंग अोंडाकार/आयताकार
ओपवनोंग के वलए दरिाजे में दो स्टड होगों े लेवकन 250 वम.मी. x 170 वम.मी. या उससे कम की ओपवनोंग
के वलए के िल एक स्टड लगाया जा सकता है। 123 वम.मी. x 90 वम.मी. तक की ओपवनोंग हेतु दरिाजो ों
में दरिाजे के साथ स्टड फोजयड हो सकता है;
(3) डोर स्टड िेक्तल्डोंग गुणित्ता स्टील के होने चावहए वजनकी न्यूनतम विवनवदयष्ट स तन्यता िमता 36.7
वकग्रा/िगय वम.मी. से कम नही ोंहोनी चावहए और मैनहोल के वलए 30 वम.मी. से कम नही ोंहोगों े
िे वनम्न में से वकसी एक प्रकार से वफक्स्ड होगों े :-
(क) प्लेट माध्यम से स्क्रू और अोंदर वफलेट िेल्डेड;
(ख) प्लेट के प्रत्येक वकनारा वफलेट िेल्ड और लेग लेंथ 10 वम.मी. से कम न हो ;
(ग) एक मध्यिती प्लेट या लग्स द्वारा दरिाजे से जुड़ा हुआ हो तावक सोंयोजन िमता स्टड की
ताकत से कम न हो और स्टड को मुड़ने से बचाया जा सके ; या
(घ) एक एकीकृ त कॉलर प्रदान वकया गया हो और दरिाजे की प्लेट पर ररिेट या स्क्रू वकया
जाएगा और इसे बेंडने से रोका जा सके , इस मामले में सोंयोजन की शक्ति स्टड की शक्ति से कम नही ों
होगी;
(4) जब दरिाजा कें द्रीय क्तस्थवत में हो तो डोर क्तस्पगोट के चारो ों ओर लगभग 105 वम.मी. की वनकासी
होनी चावहए और वकसी भी वबोंदु पर वनकासी 3 वम.मी. से अवधक नही ोंहोनी चावहए। क्तस्पगोट की गहराई
गैस्के ट को फों साने के वलए पयायप्त होनी चावहए;
(5) नट को बोल्ट् के अनुकू ल उपयुि सामग्री का होना चावहए और वसवटोंग सतह पर होने चावहए;
(6) हृॉस-बार पयायप्त अनुपात का और हल्के या रॉट स्टील का होना चावहए।138 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वटप्पणी: डोर प्लेट या डोर प्लेट पर लॉटेड सेक्शन से जुड़े हेड बोल्ट् स्टड के बजाय उवचत
लेग्स के आई बोल्ट् का उपयोग वकया जा सकता है।
(7) फ्लैट प्लेट वनमायण के दरिाजे की न्यूनतम पररकवलत मोटाई (अथायतट एक प्लेट से बनी
अनक्तस्टफे न्ड्), वनम्न सूि द्वारा वनधायररत की गई मोटाई से कम नही ोंहोगी: -
0.35 Pxd² + W
t = -------------------- िृत्ताकार दरिाजे के वलए
f
0.35 P (2-a/b) x a² + W
t = ----------------------------- अोंडाकार दरिाजे के वलए
f
जहाों,
t = फ्लैट डोर की न्यूनतम पररकक्तित मोटाई (वम.मी. में)
P = N/वम.मी.² में बॉयलर का वडजाइन प्रेशर है
d = ओपवनोंग का व्यास है वजसमें डोर वफट वकया गया है, यवद गोल है (वम.मी. में)
a = ओपवनोंग का छोटा अि है, वजसमें डोर वफट वकया गया है यवद िह अोंडाकार है। (वम.मी. में)
b = ओपवनोंग के वलए बड़ा अि है, वजसमें डोर वफट वकया गया है, यवद अण्डाकार है (वम.मी. में)
W = एन में एक स्टड की पूणय भार िमता है (वडजाइन तापमान पर प्रभािी स्टड िेि X
वडजाइन स्टरैस मान)
f = अवधकतम अनुमेय तनाि मान है, जो उस सामग्री के देश के गिवनिंग कोड में उपलब्ध
है जो N/वम.मी.2 है।
वटप्पणी: 50 N/वम.मी.2 मान के एक वडजाइन तनाि का उपयोग काबयन स्टील बोल्ट् के
वलए वकया जा सकता है, वजसका वडजाइन तापमान 300 वडग्री सेक्तियस से अवधक न हो।
138. उठे हुए मैनहोल फ्रे म, किर प्लेट स और जॉइन्ट बोल्ट - (1) (क) उठे हुए
सकुय लर मैनहोल फ्रे म वजसका व्यास 406 वम.मी. से अवधक नही ोंहै िे सभी वहस्सो ों में 19 वम.मी. मोटे
होने चावहए। ऐसे फ्रे म के वलए सकुय लर किर प्लेट और ज्वाोंइट फ्लैंग्ज वनम्न से कम नही ोंहोने चावहएः
8.4 वकग्रा/िगय सेमी तक के प्रेशर के वलए मोटाई 25 वम.मी. (जी)
8.4 वकग्रा/िगय सेमी से अवधक लेवकन 14 वकग्रा/िगय सेमी तक के प्रेशर के वलए मोटाई 28 वम.मी. (जी)
14 वकग्रा/िगय सेमी से अवधक लेवकन 17.5 वकग्रा/िगय सेमी तक के प्रेशर के वलए मोटाई 32 वम.मी.
(जी)
(ख) 14 वकग्रा/िगय सेमी (जी) प्रेशर के वलए उठे हुए सकुय लर मैनहोल फ्रे म वफट नही ोंवकया जाएोंगे।
किर प्लेट को कम से कम सोलह स्टील बोल्ट् वजनका व्यास 25 वम.मी. से कम न हो, से सुरवित वकया
जाएगा, तावक भाप के प्रेशर के कारण बोल्ट् में स्टरैस वनम्नवलक्तखत से अवधक न हो:
25 वम.मी. बोल्ट् के वलए 350 वकग्रा/ िगय सेमी
28 वम.मी. बोल्ट् के वलए 421 वकग्रा/ िगय सेमी
32 वम.मी. बोल्ट् के वलए 456 वकग्रा/ िगय सेमी[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 139
(ग) गणना के प्रयोजन के वलए प्रेशर को बोल्ट् के वपच सकय ल के भीतर पूरे िेि पर कायय करता
हुआ माना जाएगा और स्क्रू थ्रेड के नीचे बोल्ट् िेि माना जाएगा।
(2) बाहर उठा हुआ सकषु लर माउथपीस वनम्नानुसार होगा:
(क) िेल्ड के वबना एक वहस्से में बना हुआ;
(ख) उवचत रोल्ड सक्शेन और फोजय िेक्तल्डड के द्वारा बना हुआ, अथिा
(ग) फ्यूजन िेक्तल्डोंग द्वारा वनवमयत, बशते वक िे िेक्तल्डोंग के बाद और बॉयलर से जोड़ने से पहले हीट
टरीटमेंट द्वारा स्टरैस ररवलि वकए हुए हो ों
(घ) िेल्ड उपयुि जगह पर होने चावहए तावक िे बॉयलर की अनुप्रस्थ मध्य रेखा पर क्तस्थत हो।ों
माउथवपस और किरो ों के ज्वाोंइवटोंग फ्लैंग्ज को बोल्ट् के वलए सामने और वकनारे और वबयररोंग
सतह पर मशीनीकृ त वकया जाएगा।
(ङ) बोल्ट् और नट को मशीनीकृ त वकया जाएगा जहाों फ्लैंग्ज के सोंपकय में और बोल्ट् के अोंदर और
बाहर जोड़ा तैयार वकया जाना चावहए तावक फ्लैंज के विरूपण की सोंभािना को रोका जा सके ।
किर प्लेटो ोंको फ्रे म के आोंतररक व्यास के लगभग एक-आठिें वहस्से की गहराई तक बाहर की
ओर रखा जाना चावहए।
(च) सभी फ्रे म और माउथपीस उन सतहो ों के करीब होने चावहए वजनसे उन्हें जोड़ा जाना है। सभी
कॉवकों ग वकनारो ोंको मशीन या मशीन गैस कट वकया जाना चावहए।
139. शेल में मैनहोल की ल्पथवत- बेलनाकार शेल में मैनहोल और अन्य ओपवनोंग जहाों तक
सोंभि हो, वकसी भी सीम्स से, अवधमानतः बॉयलर टॉप के पीछे के छोर की ओर रखा जाना चावहए।
जहाों भी सोंभि हो, बॉयलर की अनुदैर्घ्य मध्य रेखा के समानाोंतर लघु अि के साथ अोंडाकार ओपवनोंग
की व्यिस्था की जाएगी। वकसी भी क्तस्थवत में वकसी भी ओपवनोंग की पररवध की लोंबाई ओपवनोंग की
अनुदैर्घ्य चौड़ाई के दोगुने से अवधक नही ोंहोगी।
140. मैनहोल के िवतपूवतष ररंग - मैनहोल के वलए बेलनाकार शेल के भाग को काटने के वलए हर
मामले में िवतपूवतय प्रदान की जाएगी। िवतपूवतय ररोंग के नेट सेक्शन की ताकत और िेल्ड जो उन्हें शेल
में सुरवित रखता है कटे हुए शेल के उस वहस्से की तुलना में, अनुदैर्घ्य सीम्म की दिता से कम नही ों
होना चावहए।
141. शेल प्रकार के बॉयलर में बडे होल्स काटने के वलए िवतपूवतष - जहाों फ्रे म या डोर में
सीवटोंग के सोंयोजन के उद्देश्य से होि को बेलनाकार शेल में काटते हैं, िवतपूवतय इस प्रकार प्रदान की
जाएगी वक शेल के 101.6 वम.मी. के भीतर फ्रे म के वहस्सो ों सवहत शावमल सेक्शनल एररया, हटाए गए
सेक्शलन एररया से कम नही ोंहोगा। जो वक ओपवनोंग के व्यास और प्लेट की गणना की गई मोटाई का
गुणनफल होगा जैसा वक सूि (4 / 2) द्वारा पाया गया है। जहाों माउोंवटोंग के वलए सीवटोंग को वफक्स
करने के उद्देश्य से बेलनाकार शेल में होल काटा जाता है और छेद का व्यास शेल प्लेट प्लस 70 वम.मी.
की मोटाई के 2¼ गुना से अवधक है, िवतपूवतय प्रदान वकया जाएगा। जहाों सोंरचना के अन्य भाग को
प्राप्त करने के वलए बेलनाकार शेल में बड़ी ओपवनोंग को काटा जाता है, जहाों काटा गया है उस वकनारे
को वकसी अन्य तरीके से कु शलता से हृासस्टे या सुदृा वकया जाएगा।140 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय -4
िाटर ट्यूब बॉयलर और सुपरहीटसष के वलए फ्यूजन िेल्ड डरम
142. सामान्य शतें
जहाों लागू हो, वनमायताओ,ों वनरीिण प्रावधकाररयो,ों आवद के प्रमाण पि से सोंबोंवधत अध्याय -1 और
वनमायण से सोंबोंवधत अध्याय -3 की सामान्य शतों का पालन वकया जाना चावहए।
भाग – I
143. फ्यूजन िेल्डेड बॉयलर डरमो ंके वलए वनमाषण की सामग्री.- (1) फ्यूजन िेल्डेड बॉयलर डरम के
वनमायण में प्लेटो ोंका उपयोग करने के वलए अध्याय-2 की आिश्यकताएों लागू होगों ी।
(2) गाे जाने से पहले 50 वम.मी. से अवधक मोटाई की प्लेटो ोंको ग्रेन शोधन के वलए समान रूप से
हीट टरीटमेंट वकया जाएगा। एक तरल माध्यम में शमन करने िाले हीट टरीटमेंट की अनुमवत नही ोंहै।
भाग - II
144. फ्यूजन िेल्डेड डरम.- शब्द 'फ्यूजन िेल्ड', इस अध्याय के प्रयोजन के वलए, धातु आकय प्रवहृया
द्वारा किर वकए गए इलेररोड या अन्य इलेक्तररक आकय प्रवहृया के साथ बनाए गए सभी िेल्डेड जोड़ो ों
पर लागू होता है, वजसमें आकय स्टरीम और जमा िेल्ड धातु िायुमोंडलीय सोंदू ण से परररवित होते हैं।
145. यह अभीष्ट स है वक यह अध्याय वसोंगल रन या हैिी रन िेक्तल्डोंग प्रवहृया के मामले में लागू होगा और
इस प्रवहृया द्वारा विवनवमयत िेल्डेड बॉयलर डरम इस अध्याय के सभी विवनयमो ों के साथ पालन करेंगे,
उन मामलो ों को छोड़कर वजनमें विचलन के िल उस प्रवहृया के सबसे कु शल उपयोग के वलए
आिश्यक विशे आिश्यकताओ ों के कारण आिश्यक है। इसवलए सामग्री की सोंचालन गुणित्ता,
वनमायण िकय मैनवशप और परीिण (नॉन-वडस्टरक्तरि और अन्य दोनो ों ही) को वनयोंवित करने िाले सभी
विवनयम लागू होगों े।
146. कमषशाला के उपकरण
(1) िेक्तल्डोंग प्लाोंट और उपकरण अच्छी गुणित्ता के होने चावहए और उन्हें एक दितापूणय काययशील
क्तस्थवत में बनाए रखा जाना चावहए।
(2) िेक्तल्डोंग उपकरणो ों को किर में सोंस्थावपत और व्यिक्तस्थत वकया जाना चावहए, तावक िेक्तल्डोंग
कायय हिा के झोको ोंऔर प्रवतकू ल मौसम क्तस्थवत से मुि क्तस्थवतयो ोंमें वकया जा सके ।
(3) प्रवहृया ऐसी होनी चावहए वक िेक्तल्डोंग कायों का वनयवमत और व्यिक्तस्थत पययिेिण हो और
अवधकाररयो ोंद्वारा िेक्तल्डोंग ऑपरेटरो ोंकी कारीगरी की गुणित्ता का समय-समय पर परीिण वकया जाना
चावहए।
(4) इन परीिणो ों का ररकॉडय रखा जाना चावहए और जाोंच के वलए सिम व्यक्ति को उपलब्ध
कराया जाना चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 141
147. परीिण प्रयोगशाला.-
(1) कमयशाला को एक दि परीिण प्रयोगशाला से सक्तित वकया जाना चावहए वजसमें तन्यता, बेंड
और प्रभाि परीिण करने के वलए उपयुि उपकरण, नमूनो ों की सूक्ष्म जाोंच और दबाि िावहकाओ ों में
िास्तविक जोड़ो ोंकी एक्स-रे जाोंच शावमल होनी चावहए।
(2) कमयशाला को तापमान वनयोंिण के वलए सोंतो जनक साधनो ोंके साथ एक उपयुि ताप उपचार
भट्टी से भी सुसक्तित वकया जाना चावहए, लेवकन एक िैकक्तिक व्यिस्था की जाए वजसमें डरमो ोंका कही ों
और ताप प्रवहृया वकया जा सके ।
148. वनमाषण का वििरण और िेल्पल्डंग की तैयारी.- (1) विवनमायता, वनमायण कायय शुरू करने
से पहले, अनुमोदन के वलए डरमो ों के वनमायण का पूणय वििरण दशायते हुए पूरी लम्बाई-चौड़ाई की
खोंडिार डराइोंग के साथ वनरीिण प्रावधकारी को उपलब्ध कराएगा।
(2) एक पैमाने पर रेखा वचवित मुख्य खाोंचो ों (सीम) की प्रस्तावित िेल्ड तैयारी की पूरी लम्बाई-
चौड़ाई की डराइोंग, वजसमें स्पष्ट स रूप से सभी प्रासोंवगक वििरण दशायया गया हो, प्रस्तुत की जाएगी।
(3) स्टैंड पाइप, शाखा पाइप और सीवटोंग और अनुदैर्घ्य और पररधीय खाोंचो ों (सीम) और अन्य
खाली जगहो ोंको जोड़ने के वलए िेल्ड तैयाररयो ोंका वििरण दशायते हुए स्के च प्रस्तुत वकया जाएगा।
149. प्लेटो ंकी तैयारी.- प्लेटो ोंकी तैयारी के वलए विवनयम 77 की अपेिाएों लागू होगों ी।
150. डरमो ंका बेलनाकार ढांचा (शेल).-
(1) प्रत्येक डरम शेल प्लेट प्लेट के अोंवतम वकनारो ोंतक बेलनाकार रूप में होगी।
(2) बेंवडोंग पूरी तरह से मशीन द्वारा की जाएगी और स्थानीय हीवटोंग या हथौड़ा चलाना प्रवतबोंवधत
है।
(3) जहाों प्लेटटस, प्लेट की मोटाई के 20 गुना से कम आोंतररक व्यास की ओर मोड़ी जाती हैं, िहाों
मुड़ने या अोंवतम पोस्ट िेल्ड हीट टरीटमेंट के साथ सोंयुि होने के बाद उन्हें दितापूियक हीट-टरीट वकया
जाएगा।
151. िेल्डेड जोड बनाने की प्वत.- (1) िेक्तल्डोंग की अपेवित गुणित्ता प्राप्त करने के वलए
खाोंचो ों को (सीम) बैवकों ग क्तस्टरप के साथ या वबना प्लेट के दोनो ों ओर या प्लेट के एक ओर से िेल्ड वकया
जा सकता है और यवद एक बैवकों ग क्तस्टरप का उपयोग वकया जाता है, तो इसे हटा वदया जाएगा और उस
सतह को तैयार वकया जाएगा।
(2) धातु के अवतररि रन, िेल्डेड खाोंचो ों(सीम) की सतह पर जमा वकए जाने चावहए तावक प्लेट की
सतहो ोंके स्तर पर िेल्डेड धातु को यथासोंभि पररष्कृ त वकया जा सके ।
(3) ऐसी अवतररि िेक्तल्डोंग की मोटाई तावलका 4/1 में वदए गए मूल् से अवधक नही ोंहोगी।142 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 4/1
हृम सों. अवधकतम सुदृढीकरण, वममी . में
नाममाि मोटाई, वममी. में पाइप और ट्यूवबोंग में पररधीय
अन्य िेल्ड
जोड़
(1) (2) (3) (4)
(i) 2.5 2.5
3 तक
(ii) 3 से अवधक और 5 इोंच तक, (5 इोंच
3.0 2.5
शावमल है)
(iii) 5 से अवधक और 13 इोंच तक, (13
4.0 2.5
इोंच शावमल है)
(iv) 13 से अवधक और 25 इोंच तक,
5.0 2.5
(25 इोंच शावमल है)
(v) 25 से अवधक और 50 इोंच तक,
6.0 3.0
(50 इोंच शावमल है)
(vi) 50 से अवधक और 75 इोंच तक,
4.0
नोट
(75 इोंच शावमल है)
(vii) 75 से अवधक और 100 इोंच तक,
5.5
नोट
(100 इोंच शावमल है)
(viii) 75 से अवधक और 100 इोंच तक,
6.0
नोट
(100 इोंच शावमल है)
(ix) 8.0
125 से अवधक नोट
नोट - 6 वममी या िेल्ड की चौड़ाई से 1/8 गुना, वम.मी. में, इनमें से जो भी अवधक हो।
(4) िेल्ड की सतह, वजन्हें बाद में रेवडयोग्राफ वकया जाना है, कोसय लहरो,ों ओिरलैप, खाोंचे, वि म
लकीरो ों और िैली से पयायप्त रूप से मुि होनी चावहए, तावक दबाि बाने से बचा जा सके और
रेवडयोग्राफ और अन्य एनडीटी पद्वतयो ों की उवचत व्याख्या की अनुमवत वमल सके । यवद
रेवडयोग्रावफक वफल्म की व्याख्या करते समय िेल्ड की सतह की क्तस्थवत के बारे में कोई प्रश्न है, तो
वफल्म की िास्तविक िेल्ड सतह से तुलना की जाएगी, या वचकनी आकृ वत प्रदान की जाएगी और
रेवडयोग्राफी जाोंच से पहले प्लेट की सोंबोंवधत सतहो ोंके साथ फ्लश वकया जाएगा।
(5) अोंडरकट 0.8 वममी या दीिार की मोटाई के 10% से अवधक नही ोंहोगा, जो भी कम हो और
अोंडरकट वडजाइन की दीिार की मोटाई का अवतहृमण नही ोंकरेगी।
(6) स्टैंडपाइप, शाखा पाइप, सीवटोंग, िवतपूवतय प्लेट, डबवलोंग प्लेट या मैनहोल फ्रे म वचपकाते समय,
प्रत्येक िेल्ड पर कम से कम दो रन धातु जमा की जाएगी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 143
(7) िेल्ड के प्रत्येक रन को अच्छी तरह से साफ वकया जाएगा और ऐसे लैग से मुि वकया जाएगा,
जो बाद के रन की गुणित्ता पर प्रवतकू ल प्रभाि डाल सकता है।
(8) िेल्डो ोंको उनकी लोके शन की पहचान सुविधा के वलए स्थायी रूप से वचव्त वकया जाएगा।
152. िेल्डेड जोडो ं का प्रकार.- अनुदैर्घ्य और पररधीय खाोंचे (सीम) वसोंगल या डबल यू या िी प्रकार
के बट जोड़ो ोंके साथ बनाए जाएोंगे।
153. जोडो ं की संख्या.- वजन मामलो ों में अनुमोवदत वडजाइन को ध्यान में रखते हुए, ऐसी लम्बाई-
चौड़ाई हैं वक शेल को एकल प्लेट से नही ोंबनाया जाना सोंभि नही ोंहै, िहाों इसे जोड़ो ोंकी न्यूनतम सोंख्या
के साथ बनाया जाएगा और हृवमक ररोंगो ोंमें अनुदैर्घ्य सीम लाइन में नही ोंपड़ेगी, वसिाय इसके वक जहाों
डरम की ररोंग असमान मोटाई िाले दो वहस्सो ों(हाब्स) में है।
154. ट्यूब छेदो ं की ल्पथवत.- (1) िेल्डेड सीमो ों में ट्यूब के छेदो ों से बचा जाना चावहए। जहाों छेद
अपररहायय हैं, इन सीमो ों की रेवडयोग्राफी के बाद उन्हें िेल्डेड सीम के माध्यम से मशीनीकृ त वकया जा
सकता है।
(2) िेनेवडयम स्टीि के मामले में, रेवडयोग्राफी के अलािा, िेल्डेड सीमो ों को स्टरेस ररलीि वकया
जाएगा।
(3) िेल्ड की वदशा में वलगामेंट की दिता को 0.95 तक के िेल्ड घटक से गुणा वकया जाएगा, वक
ऐसे मामलो ोंको छोड़कर जब ट्यूब छेद के वकनारे से िेल्ड के वकनारे तक की दूरी 13 वममी से अवधक
हो।
(4) िेल्ड के वकनारे को िेल्ड ग्रूि का वकनारा माना जाएगा, जैसा वक िेक्तल्डोंग से पहले प्लेट में
मशीनीकृ त वकया गया हो।
इस विवनयम में शावमल वकसी बात के होते हुए भी, वजन मामलो ोंमें िेल्ड जोड़ की 100 प्रवतशत
रेवडयोग्राफी की जाती है, िहाों िेल्ड की वदशा में वलगामेंट की दिता को िेल्ड घटक 0.95 से गुणा नही ों
वकया जाएगा।
155. डरमो ंकी गोलाई.-
(1) (क) डरमो ं की गोलाई- वकसी भी हृॉस-सेक्शन पर मापे गए डरम के आोंतररक व्यास और डरम के
नाममाि आोंतररक व्यास के बीच का अोंतर नाममाि आोंतररक व्यास के 1 प्रवतशत से अवधक नही ोंहोना
चावहए।
(ख) डरम के बाहरी वहस्से के वडजाइन वकए गए रूप और आोंतररक व्यास के एक चौथाई के बराबर
लोंबाई के गेज के साथ डरम के बाहर मापा गया प्रोफ़ाइल का कोई भी अोंतर, नीचे तावलका 4/2 में वदए
गए प्रवतशत से अवधक नही ोंहोगा:
तावलका 4/2
हृम सों. डरम का नाममाि आोंतररक व्यास नाममाि आोंतररक व्यास का प्रवतशत
(1) (2) (3)
(i) 915 एमएम तक, (915 एमएम सवहत) 0.375
(ii) 915 एमएम से अवधक (1150 एमएम सवहत) 0.35
(iii) 1150 एमएम से अवधक 0.3144 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
िेल्डेड सीम पर फ्लैट की अनुमवत नही ोंहोगी, और गोलाई की तुलना में कोई भी लोकल अोंतर, धीरे-
धीरे लाया जाएगा।
(2) (क) सामान्यीकृ त डरमो ों के मामले में, वकसी भाग में गोलाई में अोंतर 2% से अवधक नही ों
होगा और दबाि मुि डरम के मामले में 1% से अवधक नही ोंहोगा। एक सीधी रेखा से अोंतर बेलनाकार
लोंबाई के 0.3% से अवधक नही ोंहोगा।
(ख) (i) डरमो ोंकी गोलाई से अोंतर वनधायररत करने के वलए हृॉस सेक्शन पर अवधकतम
और न्यूनतम आोंतररक व्यास को मापा जाएगा।
(ii) इन मापे गए मूल्ो ोंसे गोलाई से प्रवतशत अोंतर की गणना वनम्न सूि के अनुसार
की जाएगी:-
2(d – d )
max min
C = ------------------- 100
(d + d )
max min
जहाों, C = गोल आकार की तुलना में डरमो ोंके अोंतर की प्रवतशतता।
d = हृॉस-सेक्शन पर आोंतररक व्यास।
(ग) एक सीधी रेखा से अोंतर वनधायररत करने के वलए, एक क्तखोंची हुई रेखा को पिो ों
के सापेि अनुदैर्घ्य रूप से रखा जाना चावहए और सोंबोंवधत शेल रेखा से इसकी सबसे
बड़ी दूरी को मापा जाना चावहए। इस दूरी से, और बेलनाकार शेल से, सीधी रेखा से
अोंतर की गणना की जाएगी।
156. फ्यूजन िेल्डेड सीमो ं के मैके वनकल टेट और टेट प्लेट स.- (1) फ्यूजन िेल्डेड जोड़ यहाों
वनवदयष्ट स याोंविक परीिणो ों के अनुरूप होगों े। प्रत्येक अनुदैर्घ्य सीम की िेक्तल्डोंग को दशायने के वलए कम से
कम एक सेट परीिण प्लेट प्रदान की जाएगी। परीिण प्लेटें अनुदैर्घ्य सीम के प्रत्येक छोर पर सोंलग्न हो
सकती हैं या सेट के िल एक छोर पर क्तस्थत हो सकता है।
(2) जहाों डरम शेल दो या दो से अवधक प्रवहृयाओ ों (कोसय) में बनाया जाता है, साोंतररत अनुदैर्घ्य सीम को
वनरोंतर अनुदैर्घ्य सीम के रूप में माना जाएगा, बशते वक िेक्तल्डोंग एक ही वनरोंतर सोंचालन और एक ही
ऑपरेटर या ऑपरेटरो ोंद्वारा की जाए।
(3) जहाों के िल पररधीय सीम है या जहाों पररवध सीम को िेक्तल्डोंग करने की पद्वत अनुदैध्यय सीम के वलए
वनयोवजत से वभन्न होती है, िहाों परीिण प्लेट प्रदान करने की पद्वत का वनरीिण प्रावधकारी द्वारा
वनधायररत जाएगा।
(4) (क) विवनयम 157 के उप-विवनयम (1) में वनवदयष्ट स परीिण टुकड़ो ों और आिश्यकतानुसार
वकसी भी दोहराए जाने िाले परीिण टुकड़े की तैयारी के वलए परीिण प्लेट पयायप्त आकार की होनी
चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 145
(ख) परीिण प्लेटो ों के प्रत्येक सेट के वलए सामग्री को सोंबोंवधत प्लेट या उपयुि सीम बनाने िाली
प्लेटो ोंसे काटा जाएगा, और कट शुरू होने से पहले सिम व्यक्ति द्वारा मुहर लगाई जाएगी।
(5) जब प्लेट के विश्ले ण को वनरीिण प्रावधकारी द्वारा अनुमोवदत वकया जाता है और इसे पयायप्त रूप
से समान माना जाता है, तो परीिण प्लेटो ोंको के िल एक डरम प्लेट से काटा जा सकता है।
(6) परीिण के टुकड़ो ोंको काटने की अनुमवत देने के वलए शेल प्लेट पर अपयायप्त सामग्री उपलब्ध होने
की क्तस्थवत में, ये वीकीकायय होगों े, यवद िे वकसी अन्य प्लेट से बने हो,ों बशते वक यह उसी कास्ट से बना हो।
(7) (क) परीिण प्लेटो ों में िेल्ड खाोंचे (ग्रूि) अनुदैर्घ्य सीम के सोंगत वकनारो ों के वलए अपनाए गए के
समान होगों े, और सोंबोंवधत इयफ्यूज फे स वनरोंतर एलाइन्मेंट में होगों े।
(ख) विकृ वत रोकने के उद्देश्य से िेक्तल्डोंग के दौरान परीिण प्लेटो ों को सुदृा बनाया जाना चावहए या
सपोटय प्रदान वकया जाना चावहए।
(ग) प्लेटो ोंऔर सीम में िेल्ड धातु एक ही ग्रेड के इलेररोड की होनी चावहए और एक ही ऑपरेशन
में लगातार जमा की जानी चावहए।
(8) वकसी भी परीिण प्लेट में िेल्ड की मरम्मत तब तक नही ोंकी जाएगी जब तक वनरीिण प्रावधकारी
द्वारा सहमवत न दी जाए और मरम्मत इस तरह से की जाएगी, वजससे यह सुवनवश्चत हो सके वक टेस्ट
तपोपचार प्लेट में मरम्मत वकया गया सीम, मुख्य सीम में सामग्री का प्रवतवनवधत्व करता हो।
(9) जहाों िेक्तल्डोंग के दौरान विकृ त परीिण प्लेटो ोंको सीधा करना अपेवित हो, उन्हें डरम के तपोपचार के
तापमान से नीचे के तापमान पर सीधा वकया जा सकता है, वजससे िे सोंबोंवधत हैं। सीधा करने की यह
प्रवहृया अोंवतम तपोपचार से पहले पूरी की जाएगी।
(10) तपोपचार की प्रवहृया में विवनयम 98 का अनुपालन सुवनवश्चत वकया जाएगा।
(11) यवद रेवडयोग्रावफक जाोंच द्वारा परीिण प्लेट के िेल्ड धातु में कोई दो प्रकट होता है, तो उनकी
क्तस्थवत प्लेट पर स्पष्ट स रूप से वचव्त की जाएगी और परीिण के टुकड़ो ों को परीिण प्लेटो ों के ऐसे
वहस्सो ोंसे चुना जाएगा, जैसा वक वनरीिण प्रावधकारी द्वारा वनधायररत वकया जाए।
157. टेट पीस का चयन *.- (1) प्रत्येक अनुदैर्घ्य सीम पर परीिण प्लेटो ों या प्लेटो ों से, वनम्नवलक्तखत
परीिणो ोंके वलए परीिण टुकड़ो ोंका चयन वकया जाएगा, वचि 4/1 और 4/2 में दशायते हुए कट आउट
नमूनो ोंऔर पहचान के वलए सिम व्यक्ति द्वारा मुहर लगाई गई।
(क) िेल्डेड जोड़ के वलए एक तन्यता परीिण नमूना।
(ख) एक ऑल-िेल्ड धातु तन्यता परीिण नमूना
(ग) दो बेंड परीिण नमूने।
(घ) तीन नोकदार-बार प्रभाि परीिण नमूने।146 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ङ) सूक्ष्म और स्थूल जाोंच के वलए एक नमूना
सभी लम्बाई-चौड़ाई वममी में है।
1. जोड़ के वलए तन्यता परीिण।
2. सभी-िेल्ड धातु के वलए तन्यता परीिण।
3. बेंड टेस्ट, प्लेट की बाहरी और भीतरी सतह (िेल्ड पर)।
4. नोकदार बार प्रभाि परीिण नमूना।
5. माइहृो और मैहृो नमूना।
वचत्र 4/1: टेट प्लेट स का वििरण
सभी लम्बाई-चौड़ाई वममी में है।
1. जोड़ के वलए तन्यता परीिण। 4. (क) चापी प्रभाि परीिण, प्लेट की
2. सभी-िेल्ड धातु के वलए तन्यता बाहरी सतह।
परीिण (ख) चापी प्रभाि परीिण, प्लेट की
3. बेंड टेस्ट, प्लेट की बाहरी और भीतरी आोंतररक सतह।
सतह (िेल्ड पर) 5. माइहृो और मैहृो नमूना।
वचत्र 4/2: परीिण प्लेटो ंका वििरण
* परीिण प्लेटो ों में परीिण टुकड़ो ों की अनुमावनत क्तस्थवत दशायते हुए उदाहरण वचि 4/1 और 4/2
में वदए हैं[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 147
परीिण प्लेटो ों के प्रत्येक सेट के शे को वकसी भी अपेवित पुन: परीिण के वलए सुरवित रखा
जाएगा। पुन: परीिण के वलए वकसी भी नमूने को मूल नमूने के रूप में परीिण प्लेट के उसी
सेट से काट वदया जाएगा।
(2) डरम के बाहर के अनुरूप तन्यता, बेंड और प्रभाि परीिण नमूनो ोंकी सतहो ोंको के िल हल्के ढोंग से
सक्तित वकया जाएगा तावक मूल धातु की लुाकी सतह पूरी तरह से हटाई न जाए, वसिाय इसके वक
जहाों लगी प्लेटो ोंकी रोल्ड सतहें एक दूसरे के बराबर नही ोंहैं, िहाों िेल्ड के प्रत्येक फे स पर एक प्लेट को
मशीनीकृ त वकया जा सकता है, बशते वक हटाई धातु की गहराई 0.8 वममी से अवधक न हो।
158. तन्यता परीिण टुकडे.- (1) (क) कम तन्यता भाग की लम्बाई-चौड़ाई वचि 4/3 में दशायई
जाएगी, कम वकए गए भाग की चौड़ाई कम से कम 25 एमएम होगी।
(ख) यवद प्लेट की मोटाई 30 वममी से अवधक नही ोंहै, तो नमूने की मोटाई प्लेट की मोटाई के बराबर
होगी और प्लेट और िेल्ड की सतह की अवनयवमतताओ ों को दूर करने के वलए नमूने की प्लेट की सतह
को मशीनीकृ त वकया जाएगा।
सभी लम्बाई-चौड़ाई वममी में हैं।
वचत्र 4/3: कम वकए भाग का तन्यता नमूना
(ग) यवद प्लेट की मोटाई 30 वममी से अवधक है, तो तन्यता परीिण कई कम वकए गए भाग के नमूनो ों
पर वकया जाएगा, वजनमें से प्रत्येक की मोटाई कम से कम 30 वममी और चौड़ाई कम से कम 25 वममी
के प्रभािी हृॉस-सेक्शन पर होगी। इन नमूनो ोंको परीिण के टुकड़े से इस तरह से वनकाला जाएगा वक
तन्यता परीिण िेल्ड जोड़ो ों की पूरी मोटाई को किर करे जैसा वक वचि में 4/4 दशायया गया है। इस
मामले में सोंबोंवधत प्रत्येक परीिण नमूने के परीिण का पररणाम विवनयम 159 के उप-विवनयम (1) में
वनवदयष्ट स शतों के अनुरूप होना चावहए।
सभी लम्बाई-चौड़ाई वममी में है।
वचत्र 4/4: मोटी प्लेट में कम वकए भाग का तन्यता नमूना148 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
सभी लम्बाई-चौड़ाई वममी में है।
वचत्र 4/5: ऑल-िेल्ड मेटल टेट नमूना
(2) सभी िेल्ड मेटल तन्यता परीिण नमूनो ों की लम्बाई चौड़ाई-वचि 4/5 में दी गई है। व्यास
िेल्ड के हृॉस-सेक्शन के अनुरूप अवधकतर सोंभि होगा, लेवकन वकसी भी मामले में 20 वममी
से अवधक नही ोंहोगा। गेज की लोंबाई व्यास के पाोंच गुना के बराबर होगी।
159. तन्यता परीिण.- (1) सामग्री के विवभन्न ग्रेड की तन्यता शक्ति विवनयम 37 में वनवदयष्ट स सीमा के
भीतर होगी।
(2) कमरे के तापमान पर ऊपरी उत्पन्न वबोंदु कमरे के तापमान पर वनवदयष्ट स न्यूनतम तन्यता
शक्ति के 50% से कम नही ोंहोगा।
(3) प्रवतशत में िेवकों ग दीघयरूपता (एन-आरएम) / सी. से कम नही ोंहोगी
जहाों Rm = कमरे के तापमान पर kgf/mm2 . में तन्यता शक्ति
एन = 50 वममी तक प्लेट मोटाई के वलए 100 का एक गुणित्ता सूचकाोंक या 50 वममी से
अवधक प्लेट की मोटाई के वलए 95।
सी = 2.2 के िल Lo=5 do या Lo=5.65/ Ao . की गेज लोंबाई के वलए
जहाों L0 = गेज लोंबाई
एओ = आयताकार परीिण टुकड़े का मूल हृॉस सेक्शन।
डीओ = गोल परीिण टुकड़े का मूल व्यास।
नोट: सी = 1.9 पररवशष्ट स-बी के परीिण टुकड़े के वलए 4 Ao की गेज लोंबाई के वलए।
(4) ऊों चे तापमान (ई ) पर सबूत सीमा 0.2% पर दबाि के न्यूनतम मूल्ो ों की गणना, विवनयम 37 में
टी
तावलका 2/5 में वदए अनुपात के (ई /आर ) के मूल् द्वारा कमरे के तापमान (आर ) में न्यूनतम
टी 20 20
वनवदयष्ट स तन्यता शक्ति को गुणा करके की जा सकती है।
160. बेंड टेट पीस.- (1) एक सीधे और एक उल्ट्े (ररिसय) बेंड के िेल्ड के वलए आड़े रूप में वलया
जाएगा और जहाों प्लेट की मोटाई इस प्रकार की हो, िहाों यह एक दूसरे के ऊपर होनी चावहए। नमूने
खोंड में आयताकार होगों े तावक चौड़ाई नमूने की मोटाई के डेा गुना के बराबर हो, लेवकन ये 30 वममी
से कम न हो। नमूनो ों की सतह को के िल प्लेट और िेल्ड की सतह की वि मताओ ों को दूर करने के
वलए मशीनीकृ त वकया जाएगा। नमूनो ों के कोनो ों को नमूने की मोटाई के 10% से अवधक के दायरे में
गोल नही ोंवकया जाएगा।
(2) जहाों प्लेट की मोटाई अवधक नही ोंहै, िहाों 38 वममी नमूने की मोटाई परीिण प्लेट की पूरी मोटाई
के बराबर होगी। जहाों प्लेट की मोटाई 38 वममी से अवधक हो तो सभी मामलो ोंमें नमूने की मोटाई कम
से कम 38 वममी होनी चावहए। तनाि में िेल्ड की बाहरी सतह के साथ परीिण वकए जाने िाले नमूने[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 149
को िेल्ड की आोंतररक सतह पर धातु को स्थानीय रूप से अपवशष्ट स को काटकर तैयार वकया जाएगा,
तावक अपेवित नमूना मोटाई प्राप्त हो सके (वचि 4/6, नमूना ए देखें)। तनाि में आोंतररक सतह के साथ
परीिण वकए जाने िाले नमूने को स्थानीय धातु की िेल्ड की बाहरी सतह के अपवशष्ट स को काटकर
तैयार वकया जाएगा तावक अपेवित नमूना मोटाई प्राप्त हो सके (वचि 4/6, नमूना बी देखें)। जहाों प्लेट
की मोटाई इस प्रकार की हो, िहाों दोनो ोंनमूनो ोंको प्लेट के एक ही टुकड़े से काटा जा सकता है। नमूने
प्लेट में एक दूसरे के ऊपर क्तस्थत होगों े (वचि 4/6, नमूना सी देखें)।
सभी लम्बाई-चौड़ाई वममी में है।
वचि 4/6: नमूना 3 बेंड परीिण (बेंड टेस्ट)
161. बेंड परीिण (बेंड टेट).- (1) नमूना इस तरह से तैयार वकया जाएगा वक पूिय की धुरी, िेल्ड
के बीच में हो, और रोलर पर उन फे सो ोंको सपोटय करता हो, जो नमूने की मोटाई द्वारा वनधायररत दूरी से
अलग वकए गए हो।ों
(2) सियश्रेष् नमूने फॉमयर के माध्यम से सपोटय के मध्य अके ला जाएगा। इस एक पूियती व्यास के
साथ विस्ताररत वकया जाएगा फॉमयर का व्यास नमूने की मोटाई द्वारा वनधायररत होगा। नीचे दी गई
तावलका की आिश्यकताएों, जो परीिण नमूने की मोटाई से सोंबोंवधत हैं, लागू होगों ी।
(3) परीिण के पूरा होने पर, नमूने की बाहरी सतह पर कोई दरार या दो पूरे नमूने में मापी गई
1.5 वममी या नमूने के साथ मापी गई 3 वममी से अवधक नही ोंहोगी। नमूने के आने पर समय से पहले
विफलता को अवीकीकृ वत का कारण नही ोंमाना जाएगा।
तावलका 4/3: बेंड टेट संबंधी आिश्यकताएं
हृम सों. प्लेट की वनवदयष्ट स न्यूनतम तन्यता शक्ति फॉमयर का सूची के अोंत में सपोटय
व्यास के बीच खाली स्थान150 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(1) (2) (3) (4)
(i) 44 के जीएफ/ वममी2. से कम 2 टी 4.2 टी
(ii) 44 से 54 के जीएफ/ वममी2 3 टी 5.2 टी
(iii) 54 के जीएफ/ वममी2. से अवधक 4 टी 6.2 टी
162. नोकदार-बार-प्रभाि परीिण.- (1) नोकदार बार प्रभाि परीिण नमूने वचि –4/7 में वदखाए
गए प्रकार और लम्बाई-चौड़ाई के हैं। नोक िेल्ड-धातु में लगभग िेल्ड की धुरी पर वनवहत होगी, और
नोक की धुरी प्लेट की सतह पर लोंबित होनी चावहए।
(2) परीिण वनम्नानुसार वकया जाएगा:
िी-नॉच नमूना 20 ± 2 वडग्री सेक्तियस के तापमान पर होना चावहए। िी-नॉच नमूने के मामले
में, नोक के वनचले भाग की मशीवनोंग बहुत सािधानीपूियक की जाएगी।
प्रभाि परीिण कायय (इम्पैर टेस्ट पीस) से प्राप्त होने िाला न्यूनतम पररणाम होगा:
(क) िी-नॉच नमूना: 3.46 के जीएफ/सेमी2
(ख) एक परीिण में तीन परीिण नमूने शावमल होगों े, और ऊपर वनवदयष्ट स मूल् तीन नमूना मूल्ो ों औसत
का है।
(ग) तीन मूल्ो ोंमें से, कोई एकल मूल्, औसत मूल् के एक वतहाई से कम नही ोंहोगा।
नोट: ऊपर का मूल् नोक के नीचे के खोंडीय िेि से विभावजत 2.76 के जीएफएम के बराबर है।
सभी लम्बाई-चौड़ाई वममी में है।
वचत्र 4/7: मानक िी-नॉच टेट पीस
163. अस्वीकृ वत से पहले अवतररि परीिण.- (1) यवद विवनयम 156 से 162 के अनुसार वलया गया
कोई भी परीिण नमूना वनवदयष्ट स आिश्यकताओ ों को पूरा करने में विफल रहता है, तो विफल होने िाले
प्रत्येक नमूने के वलए एक पुन: परीिण की अनुमवत दी जाएगी, बशते वक वनम्नवलक्तखत न्यूनतम आोंकड़े
प्राप्त कर वलए गए हैं।
(क) िेिफल में 30 प्रवतशत की कमी।
(ख) बेंड और प्रभाि परीिण को छोड़कर कोई अन्य परीिण, वनवदयष्ट स आिश्यकताओ ों
का 90 प्रवतशत।
(2) यवद कोल्ड बेंड नमूना वनवदयष्ट स आिश्यकताओ ों को पूरा करने में विफल रहता है, तो उसी
परीिण प्लेट से दो पुन: परीिण वकए जाएोंगे और ये विवनयम 160 और 161 की
आिश्यकताओ ोंका अनुपालन करेंगे।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 151
(3) यवद चापी प्रभाि परीिण वनवदयष्ट स आिश्यकताओ ों को पूरा करने में विफल रहता है, तो
परीिण प्लेट से दो पुन: परीिण वकए जाएोंगे। मूल नमूने के प्रत्येक पि में से एक, और उन्हें
इससे 5 वममी से अवधक दूरी से अलग नही ोंवकया जाएगा। दोनो ों पुन: परीिण में 2.76 के जी
एफ.एम. का न्यूनतम चापी प्रभाि परीिण मूल् वदखाई देगा।
(4) यवद यह पाया जाता है वक परीिण के अनुस्भरण से पुन: परीिण के वलए नमूना तैयार
करने की अनुमवत देने के वलए अपयायप्त धातु है, तो विपरीत और उसी अनुदैर्घ्य सीम से
सोंबोंवधत परीिण प्लेट से काटा जा सकता है।
164. नॉन-वडटरल्पिि परीिण.- (1) सूक्ष्म और मैहृो जाोंच- एक नमूना, प्लेट की पूरी मोटाई और
कम से कम 13 वममी चौड़ाई, सूक्ष्म और मैहृो जाोंच के उद्देश्य से वनरीिण प्रावधकारी द्वारा परीिण
प्लेटो ों के प्रत्येक सेट से वलया जा सकता है। गमी प्रभावित िेि सवहत िेल्ड के एक पूणय हृॉस-सेक्शन
की मैहृो-एवचोंग, सोंतो जनक पैनीटरेशन, फ्यूजन और अन्य दो ो ोंका अभाि वदखाई देना चावहए। सूक्ष्म-
एवचोंग द्वारा वदखाए गए िेल्ड की क्तस्थवत के बारे में सोंदेह के मामले में, दो की जाोंच के वलए सोंबोंवधत
िेि की सूक्ष्म जाोंच की जानी चावहए।
(2) रेवडयोग्रावफक जाोंच- (क) डरम के अनुदैर्घ्य और पररधीय िेल्डेड जोड़ो ों के प्रत्येक भाग को
रेवडयोग्रावफक जाोंच या अल्ट्रासोवनक जाोंच के अधीन होगी। जहाों अल्ट्रासोवनक जाोंच की जाती है, िहाों
वनरीिण प्रावधकारी की सोंतुवष्ट स के वलए यह प्रदवशयत वकया जाएगा वक उपयोग वकए जाने िाले उपकरण
और तकनीक सोंतो जनक है। विवनमायता यह सुवनवश्चत करेगा वक वनयोवजत ऑपरेटर उपकरण का
उपयोग करने, तकनीक को लागू करने और जाोंच के पररणामो ों की व्याख्या करने में सिम है। एनडीई
ऑपरेटर और मूल्ाोंकनकताय के पास ASNT SNT-TC-1A या ISO 9712 या समकि के अनुसार
अहयता होनी चावहए।
(ख) रेवडयोग्राफ प्राप्त करने के वलए प्रयुि पद्वत, ऐसी होनी चावहए वक िेल्ड जोड़ो ोंकी मोटाई के
2 प्रवतशत के बराबर पररमाण िाले दो ो ोंको स्पष्ट स रूप से प्रदवशयत करें। यह वनधायररत करने के वलए वक
क्या यह पररणाम प्राप्त वकया जा रहा है और अनुमोवदत फॉमय का सोंके तक है वजसमें जोड़ की मोटाई
के 2 प्रवतशत से अवधक के बराबर भाग शावमल नही ोंहै, िेल्ड के आसपास के िेि में रखा जाएगा तावक
प्रत्येक रेवडयोग्राफ़ पर एक ररकॉडय बनाया जा सके । प्रत्येक िेल्ड के प्रत्येक खोंड को वचव्त वकया
जाएगा, तावक रेवडयोग्राफ को जोड़ के प्रवतवनवधत्व के विशे भाग से आसानी से सहसोंबद् वकया जा
सके । रेवडयोग्रावफक अल्ट्रासोवनक परीिण /सिम व्यक्ति द्वारा वीकीकृ वत के अधीन स्थावपत अोंतरायष्ट सरीय
बॉयलर कोड की लाइन के अनुरूप तकनीक, आईक्यूआई सोंिेदनशीलता, घनत्व आिश्यकताओ ों और
वीकीकृ वत मानदोंडो ोंको वनवदयष्ट स करने िाली वलक्तखत प्रवहृया के अनुसार वकया जाएगा।
(ग) जाोंच मूल वफल्मो ों से की जाएगी और िेल्ड की वीकीकाययता को अवीकीकार कर वदया जाएगा या
विवनयम 165 के तहत वनपटाया जाएगा और वफर से रेवडयोग्राफ वकया जाएगा।
(घ) रेवडयोग्रावफक परीिण के बदले PAUT या TOFD या दोनो ों का उपयोग अोंतरराष्ट सरीय कोड के
अनुरूप तकनीको,ों सेट अप, कै वलिेशन, ऑपरेटर अहयता, वीकीकृ वत मानदोंडो ोंको शावमल करने के वलए
एक प्रवहृया स्थावपत करने के अधीन वकया जा सकता है।
(3). चुोंबकीय कण दो का पता लगाना- फे ररवटक स्टील के वलए जहाों भी सोंभि हो, दो का पता
लगाने की चुोंबकीय पद्वत का प्रयोग वकया जाएगा
(4). डाइ-पेनीटरेट दो का पता लगाना -डराई पेनीटरेंटटस या दो का पता लगाने की समकि पद्वत
ऑस्टेवनवटक या अन्य गैर चुोंबकीय स्टील के वलए वनयोवजत की जाएगी।152 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5). सभी बट िेल्डेड जोड़ रेवडयोग्रावफक, रेवडयोस्कोपी या अन्य अनुमोवदत पद्वतयाों जैसे
अल्ट्रासोवनक परीिण, चुोंबकीय कण वनरीिण या तरल डाई प्रिेश वनरीिण द्वारा नॉन-वडस्टरक्तरि जाोंच
के अध्यधीन होगों े। जब िेल्डेड घटको ों पर रेवडयोग्राफी के स्थान पर रेवडयोस्कोवपक जाोंच की जानी हो,
तो वनम्नवलक्तखत आिश्यकताओ ोंको पूरा वकया जाएगा, अथायतट: -
(क) वनरीिण प्रावधकारी के अनुमोदन के वलए एक वलक्तखत प्रवहृया प्रस्तुत की जाएगी,
वजसमें वनम्नवलक्तखत शावमल होगों े:
(i) सामग्री और मोटाई रेल;
(ii) उपकरण अहयता;
(iii)परीिण िस्तु स्कै न योजना;
(iv) रेवडयोस्कोवपक पैरामीटर;
(v) छवि प्रवहृया पैरामीटर;
(vi) छवि प्रदशयन पैरामीटर;
(vii) छवि सोंग्रह आिश्यकताएों;
(viii) वीकीकार-अवीकीकार मानदोंड (कोड सोंदभय);
(ix) कायय वनष्पादन मूल्ाोंकन;
(x) ऑपरेटर पहचान।
(ख) वसस्टम की रेवडयोस्कोवपक इमेजो ों की गुणित्ता बााने के वलए एक इमेज प्रोसेसर भी
होगा और वसस्टम कायय वनष्पादन गुणित्ता के अोंतगयत वनम्नवलक्तखत का प्रदशयन वकया
जाएगा:
(i) 3% की बारीक खोंड की कों टरास्ट सेंवसवटविटी;
(ii) 2% की एक मोटे खोंड की कों टरास्ट सेंवसवटविटी;
(iii) प्रवत वममी 3 लाइन के जोड़ो ोंका एक स्पावशयल रेजॉल्ूशन;
(iv) IQI सोंिेदनशीलता – जोड़ मोटाई का 2% जब तार IQI का उपयोग वकया जाना
होता है, तो तार का व्यास अि प्रणाली की न्यूनतम सेंवसवटविटी की धुरी के साथ
उन्मुख होना चावहए।
(ग) रेवडयोस्कोप को जोड़ प्रवतवनवधत्व के विशे भाग के साथ सह-सोंबद् करने के वलए
उवचत रूप से वचव्त वकया जाएगा।
(घ) रेवडयोस्कोवपक जाोंच डेटा ररकॉडय वकया जाएगा और वनरीिण प्रावधकारी द्वारा वनवदयष्ट स
रेवडयोस्कोवपक जाोंच की तारीख के बाद पयायप्त अिवध के वलए वनमायता के सोंयोंि में िीवडयो टेप,
चुोंबकीय वडस्क या ऑवप्टकल वडस्क या वकसी अन्य इलेररॉवनक स्टोरेज वडिाइस पर सोंग्रहीत
वकया जाएगा, दि रेवडयोस्कोवपक जाोंच ररकॉडय ररकॉल ररकॉडय प्रवतधारण अिवध के दौरान
वकसी भी समय उपलब्ध कराया जाएगा और परीिण िस्तुओ ों के वलए सोंदभय में खोजा जा
सके गा।
(ङ) जब रेवडयोस्कोवपक जाोंच के पररणामवीकरूप मरम्मत की गई है, तो मरम्मत की
प्रभािशीलता का मूल्ाोंकन करने के वलए उसी रेवडयोस्कोवपक तकनीक का उपयोग करके
मरम्मत वकए गए िेिो ोंकी वफर से जाोंच की जाएगी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 153
(च) रेवडयोस्कोवपक जाोंच डेटा की उवचत व्याख्या में सहायता के वलए, उपयोग की जाने िाली
तकनीक का वििरण डेटा के साथ होगा। इस जानकारी में, कम से कम, अनुमोवदत प्रवहृया
सोंबोंधी आिश्यकताएों और वसस्टम काययवनष्पादन डाटा अिश्य शावमल होगा।
165. सामान्य – (1) (क) विवनमायता द्वारा िेल्ड की गई वकसी भी मरम्मत के वलए पहले वनरीिण
प्रावधकारी द्वारा सहमवत दी जाएगी।
(ख) जहाों सीम में वितररत क्तस्थवत में दो होते हैं, दो पूणय िेक्तल्डोंग को बदलने के वलए सीम की
कु ल लोंबाई के 15 प्रवतशत की सीमा में मरम्मत की अनुमवत दी जाएगी।
(ग) जहाों दो एक ही वनरोंतर लोंबाई में क्तस्थत हैं, मरम्मत की अनुमेय सीमा वनरीिण
प्रावधकारी द्वारा वनधायररत की जाएगी।
(2) जहाों िेल्ड धातु वकसी भी तरह से वनवदयष्ट स आिश्यकताओ ों का पालन करने में विफल रहता है,
पूरे िेल्ड धातु को हटाया जा सकता है और सीम को वफर से िेल्ड वकया जा सकता है बशते वक;
(क) मूल परीिण प्लेटो ोंको समान रूप से टरीट वकया जाएगा, या
(ख) जोड़ और समान गुणित्ता िाली सामग्री के समान मोटाई की नई परीिण प्लेटटस को सीम के
अोंत से जोड़ा जाता है और इसके साथ वफर से िेल्ड वकया जाता है।
(ग) वकसी भी मामले में प्लेटो ों का परीिण विवनयम 156 से 164 के अनुसार वकया जाएगा,
तापोपचार की आिश्यकता विवनयम 166 के अनुसार होगी।
(3) अनुमेय मरम्मत की सीमा के सोंबोंध में और जब वनरीिण प्रावधकारी द्वारा सहमवत व्यि की
जाती है, तो एक पररधीय सीम को अनुदैध्यय सीम के समान माना जाएगा। वनरीिण प्रावधकारी एक
पुन: िेल्डेड पररधीय सीम के वलए प्रवतवनवध परीिणो ोंके वलए कॉल करने का हकदार होगा।
(4) मशीवनोंग की वचवपोंग या एयर आकय िेल्ड प्रवहृया द्वारा जलाकर दो ो ोंको काट वदया जाएगा।
(5) जहाों एक दो पूणय भाग को काट वदया गया है, िहाों वनरीिण प्रावधकारी पुन: िेक्तल्डोंग से पहले
एक बार जाोंच करने का हकदार होगा।
(6) मरम्मत के वलए के िल धातु चाप िेक्तल्डोंग का उपयोग वकया जाएगा।
(7) सभी मरम्मत िेि, अनुमोवदत तकनीको ों द्वारा रेवडयोग्रावफक जाोंच या रेवडयोस्कोवपक जाोंच के
अधीन वकया जाएगा।
(8) जाोंच और परीिण के उद्देश्य के वलए वनरीिण प्रावधकारी वकसी भी िेल्डेड मरम्मत का
प्रवतवनवधत्व करने िाले नमूने के वलए कॉल करने का हकदार होगा।
(9) िेल्डेड मरम्मत का कायय पूरा होने पर, वनमायताओ ों को, अनुरोध करने पर ऐसी सभी
मरम्मतो ों की क्तस्थवत, लोंबाई, गहराई और चौड़ाई को दशायता हुआ एक विस्तृत आरेख, ररकॉडय
रखने के उद्देश्यो ोंके वलए उपलब्ध कराना होगा।154 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
166. तापोपचार (हीट टरीटमेंट).- (1) (क) स्टैंड पाइप पर सीम और िेक्तल्डोंग के पूरा होने के बाद
और िेक्तल्डोंग की मरम्मत सवहत, लेवकन हाइडरोवलक परीिण से पहले, प्रत्येक डरम को दबाि राहत के
वलए हीट टरीट वकया जाएगा; तापोपचार के दौरान आवधकाररक परीिण प्लेट डरम के अोंदर पड़ी रहेंगी।
(ख) तापोपचार आिश्यकताओ ोंके वलए विवनयम 123 देखें।
(2) जहाों शेल डरम को वदए जाने िाले अोंवतम तापोपचार के समान प्राथवमक दबाि राहत उपचार
के अधीन है, प्राथवमक उपचार के दौरान परीिण प्लेटो ों को शेल के अोंदर रखा जा सकता है और
उसके बाद डरम का अोंवतम टरीटमेंट का इोंतजार वकए वबना कट और परीिण वकया जा सकता है।
(3) जहाों शेल प्राथवमक स्टरेस ररलीविोंग उपचार के अधीन नही ों है या ऐसे प्राथवमक स्टरेस ररलीविोंग
उपचार के अधीन है, जो अोंवतम तापोपचार के समान नही ों है, तो परीिण प्लेटो ों को तुलनीय
लम्बाई-चौड़ाई के वकसी अन्य डरम के अोंदर रखा जा सकता है, वजसे इस अध्याय के अनुसार
तापोपचाररत वकया जाएगा। तापोपचार भट्ठी, वजसमें परीिण प्लेटो ों से सोंबोंवधत डरम को अोंततः
अपना अोंवतम रूप से तापोपचार वदया जाएगा।
(4) तापमान चाटय यह इोंवगत करने के वलए प्रस्तुत वकए जाएोंगे वक परीिण प्लेट और िे वजस डरम
का प्रवतवनवधत्व करते हैं, िे समान हीवटोंग सोवकों ग और शीतोपचार के अधीन हैं।
(5) (क) तापोपचार के वलए, डरम को पूरे डरम को समायोवजत करने के वलए पयायप्त रूप में बड़ी
भट्टी में रखा जाएगा।
(ख) भट्ठी में तापमान माप और वनयोंिण के उवचत साधन होगों े और पूरे डरम को एक समान
तापमान पर गमय करने में सिम होगों े। इसे इस तरह से वडजाइन वकया जाएगा वक डरम पर लौ की
सीधी टक्कर को रोका जा सके ।
(ग) थमोकपलो ों को उपयुि स्थानो ों पर डरम से जोड़ा जाएगा। एक िेल्डेड शेल या डरम के वलए
दबाि-राहत प्रवहृया का एक तापमान समय आरेख प्रदान वकया जाएगा और अन्य िेल्डेड दबाि
भाग के वलए एक समान आरेख प्रदान वकया जाएगा, जहाों वनरीिण प्रावधकारी को इसकी
आिश्यकता होगी।
(6) डरम के तापोपचार के वलए िैकक्तिक प्रवहृया वनरीिण प्रावधकारी को अनुमोदन के वलए प्रस्तुत
की जा सकती है।
(7) विशे मामलो ोंमें परीिण प्लेटो ों को डरम से अलग तापोचार हीट टरीट करने की अनुमवत दी जा
सकती है, बशते वक वनरीिण प्रावधकारी यह सुवनवश्चत करने के वलए अपनाए गए साधनो ों से सोंतुष्ट स
हो वक परीिण प्लेटो ोंके वलए डरम के वलए वनम्नवलक्तखत घटक समान होगों े:-
(i) हीवटोंग की दर
(ii) अवधकतम तापमान
(iii) अवधकतम तापमान में रखने का समय[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 155
(iv) कू वलोंग की शतें।
167. मेकसष िक्सष में हाइडरोवलक परीिण (टेट).- (1) 600 वममी से अवधक आोंतररक व्यास िाले
बॉयलर डरम और 1000 वममी से अवधक आोंतररक व्यास िाले अन्य बेलनाकार घटक का, सिम व्यक्ति
की उपक्तस्थवत में विवनमायताओ ों के काम के पूरा होने पर हाइडरॉवलक रूप से दुगयण और दो के सोंके त
के वबना अवधकतम वीकीकायय कायय दबाि के 1½ गुना स्तर तक परीिण वकया जाएगा।
(2) सभी घटक, जो बॉयलर में असेंबली के बाद वनरीिण के वलए उवचत रूप से सुलभ नही ोंहैं या उप-
विवनयम (1) में वनवदयष्ट स दबाि से कम पर िेक्तल्डोंग से पहले हाइडरॉवलक रूप से परीिण वकया गया है,
बॉयलर में असेंबली से पहले दबाि अवधकतम वीकीकायय कायय करने के वलए 1½ गुना हाइडरॉवलक रूप
से परीिण वकया जाएगा।
(3) ट्यूबलर उत्पाद, वजनका िेक्तल्डोंग या अल्ट्रासॉवनक रूप से परीिण से पहले आिश्यक दबाि के
वलए हाइडरोवलक रूप से परीिण वकया गया है, उनकी आगे हाइडरोवलक परीिण की आिश्यकता नही ों
होगी, क्योवोंक घटको ों को पररधीय बट जोड़ द्वारा असेंबली के दौरान जोड़ा गया था, वजसे इन विवनयमो ों
के सोंगत प्रािधान के अनुसार िेल्डेड और नॉन-वडस्टरक्तरि परीिण वकया गया है।
(4) ट्यूबलर उत्पादो ों को छोड़कर अन्य घटको ों को बॉयलर में असेंबली से पहले हाइडरॉवलक परीिण
की आिश्यकता नही ोंहोगी, यवद पूरा बॉयलर साइट पर वडजाइन दबाि के 1½ गुना हाइडरॉवलक रूप
से परीिण वकया जाता है।
(5) डरमो,ों हैडरो ों के मामले में जो ट्यूबो ों के साथ लगाए जाने हैं, परीिण ट्यूब के वछद्रो ों की वडरवलोंग से
पहले वकया जा सकता है, लेवकन नोजल और इसी तरह की वफवटोंग करने के बाद।
(6) परीिण दबाि हर समय उवचत वनयोंिण में धीरे-धीरे बााया जाएगा तावक यह आिश्यक दबाि के
6% से अवधक न हो और 30 वमनट तक बनाए रखा जाए, वजसके बाद दबाि अवधकतम वीकीकायय कायय
दबाि तक कम वकया जाएगा, और दबाि भागो ोंके ररसाि के वलए वनकटस्थ दृश्य वनरीिण की अनुमवत
के वलए पयायप्त समय रखा जाएगा ।
(7) दबाि परीिण के माध्यम के रूप में प्रयुि पानी का तापमान 20 वडग्री सेक्तियस से कम और 50
वडग्री सेक्तियस से अवधक नही ोंहोगा।
(8) (क) 'वमवश्रत' वनमायण के डरमो ों और आोंवशक रूप से उलटे वकए गए और आोंवशक रूप से वसरो ों के
साथ िेल्ड सीम या फ्यूजन िेक्तल्डोंग द्वारा सोंलग्न वकए गए सीमलेस फोर्ज्य डरम शेल के मामले में परीिण
दबाि फ्यूजन िेल्डेड डरम के समान होगा।
(9) यवद हाइडरॉवलक परीिण से िेल्डेड भाप में कोई दो प्रकट होता है, तो इसकी मरम्मत तब तक
नही ोंकी जाएगी, जब तक वक वनरीिण प्रावधकारी ऐसा करने की अनुमवत न दे।
(10) सहमवत के अनुसार, डरम मरम्मत पूरी होने पर, वजसे पहले तापोपचार से स्टरेस ररलीि वकया गया
था, आगे तापोचार, यवद वनरीिण प्रावधकारी द्वारा आिश्यक हो, वकया जाएगा और डरम को वफर से
हाइडरॉवलक परीिण से गुजारा जाएगा।156 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
भाग – III
168. वनमाषण के दौरान वनरीिण.- वनमायण के दौरान वनरीिण और शुल्क को पररवशष्ट स-क और
विवनयम 278 द्वारा शावसत वनयोंवित वकया जाएगा।
भाग- IV
फ्यूजन िेल्ड डरम शेल के साथ जल ट्यूब बॉयलरो ंके अवधकतम स्वीकायष संचालन दबाि
169. भाप और पानी के डरम का शेल.- (क) (i) अवधकतम वीकीकायय सोंचालन दबाि वनम्न सूि द्वारा
वनधायररत वकया जाएगा:
2fE (T – 0.75)
P = ------------------- समीकरण(4/1)
D + (T – 0.75)
जहाों, P = अवधकतम वीकीकायय सोंचालन दबाि, वकलो/सेमी2 (जी) में
T = शेल की िास्तविक मोटाई, वममी में
D = शेल का अवधकतम आोंतररक व्यास, वममी में
F = काययरत धातु के तापमान में वीकीकायय सोंचालन वकलो / सेमी 2 (जी) में
दबाि (विवनयमन 170 देखें),
E = ट्यूब के वछद्र या शेल में अन्य असम्बद् खाली जगह, या अनुदैर्घ्य जोड़ो ों
के िेल्ड घटको ोंके बीच वलगामेंटटस की दिता,
क्लास I बॉयलसय के वलए, िेल्ड घटक को 1 माना जाएगा, विशे रूप से
फ्यूजन िेक्तल्डड डरम की वबना वछद्र िाली रैपर प्लेट के मामले में,
E = 1,
(ख) शेल की न्यूनतम आिश्यक मोटाई वनम्नवलक्तखत सूि के आधार पर वनधायररत की जाएगी:
t समीकरण (4/2)
( )-
जहाों,
t = वममी में शेल की न्यूनतम आिश्यक मोटाई गणना की गई,
P = वकग्रा/सेमी2 (जी) में अवधकतम वीकीकायय सोंचालन दबाि
D = शेल का अवधकतम आोंतररक व्यास, वममी में
f = काययशील धातु तापमान में वीकीकायय कायय दबाि वकग्रा/सेमी2 (जी) में का मान वनम्नवलक्तखत से
(विवनयमन 170 देखें),
E = विवनयम 171 के अनुसार वलगामेंट दिता।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 157
पूियिती सूि के आधार पर पररकवलत मोटाई के बािजूद "t" कम नही ोंहोगा: -
(i) ट्यूब प्लेटटस के वलए (जहाों ट्यूबो ों का विस्तार वकया जाता है) मोटाई कम से कम
इतनी होनी चावहए वक ट्यूब सीट की न्यूनतम समानाोंतर बेल्ट् चौड़ाई 10 वममी हो, इस
सीवटोंग को नीचे बताए अनुसार मापा जाना चावहए।
(ii) सभी ट्यूबो ों को सािधानीपूियक ट्यूब प्लेट के वछद्रो ों में फै लाना चावहए। िापसी को
रोकने के वलए ट्यूबो ोंको बेल्ड या बीडेड वकया जाना चावहए और यवद बेल वकया जाता
है, तो िे समानाोंतर ट्यूब सीट के माध्यम से कम से कम 6 वममी प्रविप्त (प्रोजेर)
करेंगे।
(2) बेवलोंग नीचे दी गई तावलका 4/4 में वदखाए अनुसार होगी:
तावलका 4/4
हृम सं. ट्यूब का बाहरी व्यास ट्यूब के वछद्र के व्यास के ऊपर
बेवलंग के व्यास की मात्रा (में)
वम.मी
(1) (2) (3)
(i) 38 वम.मी. तक (38 वम.मी. सवहत) 2 वममी
(ii) 38 वममी से अवधक और 50 वम.मी. तक 3 वममी
(50 वम.मी. सवहत)
(iii) 50 वममी से अवधक और 83 वम.मी. तक 4 वममी
(83 वम.मी. सवहत)
(iv) 83 वममी से अवधक और 101 वम.मी. 5 वममी
तक (101 वम.मी. सवहत)
(3) हैडर से बने डरमो ों की ट्यूब प्लेट में ट्यूब वछद्र इस तरह से बनाए जाने चावहए वक उनमें ट्यूब को
प्रभािी ढोंग से कसा जा सके । जहाों ट्यूब के छोर ट्यूब प्लेट के वलए सामान्य नही ोंहोते हैं, िहाों वछद्र में
ट्यूब की धुरी िाले प्राइम में मापी गई कम से कम 13 वममी की गहराई में ट्यूब की धुरी के समकोण
पर समानाोंतर सीवटोंग की नेक या बेल्ट् होनी चावहए।
(4) जहाों ट्यूब, ट्यूब प्लेट या हेडर के वलए व्यािहाररक रूप से सामान्य हैं, यह समानाोंतर
सीवटोंग, जहाों व्यािहाररक हो, 10 वममी से कम गहराई िाली नही ोंहोनी चावहए।
170. बॉयलर और इंटीग्रल सुपर हीटर डरम और हेडर के शेल्स के वलए स्वीकायष कायषशील
दबाि
डरम शेल और हेडर के वलए अवधकतम वीकीकायय दबाि को उस देश के गिवनिंग बॉयलर कोड
में उपलब्ध सामग्री के अनुरूप माना जाएगा, वजससे िह सोंबोंवधत है। मूल् की अनुपलब्धता के मामले
में, मूल्ाोंकन के वलए वनम्नवलक्तखत प्रवहृया अपनाई जाएगी:-158 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(i) 454 वडग्री सेक्तियस या उससे कम तापमान के वलए, वनम्न दो मूल्ो ोंमें से कम:-
E R
t
f= ------ or ------
1.5 2.7
(ii) 454 वडग्री सेक्तियस से अवधक के तापमान के वलए, वनम्नवलक्तखत तीन मूल्ो ोंमें से न्यूनतम:-
E S
t r
(a) ------ (b) ------ (c) S
c
1.5 1.5
जहाों,
t = काययशील धातु का तापमान,
R = कमरे के तापमान पर स्टील की न्यूनतम वनवदयष्ट स तन्यता शक्ति,
E = कमरे के तापमान पर न्यूनतम वनवदयष्ट स उत्पन्न वबोंदु,
E = तापमान 't' पर, उत्पन्न वबोंदु (0.2% प्रूफ स्टरेस)
T
S = तापमान 't' पर 100,000 घोंटो ों में 1% (चाना) उत्पन्न दैर्घ्य िृक्तद् का औसत
C
दबाि,
S = तापमान 't' पर 100,000 घोंटो ोंमें टूटने का औसत दबाि और वकसी भी क्तस्थवत में
R
तापमान पर उत्पन्न टूटन के वलए 1.33 गुना से अवधक नही।ों
नोट: यवद सामग्री मानक में S मूल् में उपलब्ध नही ों हैं और ऐसी सामग्री को भारत या विदेश में
C
बॉयलरो ों में उपयोग वकया जाता है, तो ऐसी सामग्री के वलए वीकीकायय दबाि को वनम्नानुसार माना जा
सकता है
E S
t r
------ या ------
1.5 1.5
(2) फ्यूजन िेल्डेड डरम के वलए, जब दीिार की मोटाई 60 वममी से अवधक हो, तो मोटाई में
5 वममी की प्रत्येक िृक्तद् के वलए वनधायररत "F" के मूल् में 1 प्रवतशत की कटौती की जाएगी।
इस तरह की कटौती की आिश्यकता नही ों है, बशते वक बॉयलर डरम के वनमायण में प्रयुि
स्टील प्लेट के वकसी भी वहस्से में R और E के न्यूनतम वनवदयष्ट स मूल् "जाने-माने स्टील वनमायता"
द्वारा गारोंटीकृ त हो ोंया एक वनरीिण प्रावधकारी द्वारा प्रमावणत हो।ों
(3) धातु का काययशील तापमान वनम्नानुसार वलया जाएगा: -
(क) सोंतृप्त भाप, पानी और वमट्टी के डरम के वलए, दबाि WP प्लस 28 वडग्री सेक्तियस
के अनुरूप सोंतृक्तप्त तापमान।
(ख) सुपरहीटेड स्टीम के वलए उस डरम प्लस 28 वडग्री सेक्तियस के वलए वडजाइन
वकया गया अवधकतम भाप तापमान।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 159
(4) जहाों डरम को दहन गैसो ों या बॉयलर के तीसरे या बाद के पास में ऐसी गैसो ोंद्वारा बहाि
पयायप्त रूप से सोंरवित वकया जाता है, धातु के काययशील तापमान को सोंतृक्तप्त के रूप में वलया
जाएगा या ऊपर पररभाव त अवधकतम भाप तापमान, जो भी लागू हो, के रूप में वलया जाएगा।
रीफ्रे ररी या इोंसूलेवटोंग मैटीररयल का एक ऐसा किर वजसे हटाया जा सकता है, उसे पयायप्त
सुरिा नही ोंमाना जाएगा।
नोट: जहाों स्टीि 370 वडग्री सेक्तियस से अवधक तापमान पर सेिा के वलए है, िहाों यह कहा
जाएगा वक वसवलकॉन सामग्री न्यूनतम 0.10 प्रवतशत होगी या िैकक्तिक रूप से सामग्री को,
जैसा पररवशष्ट स ङ में वदया गया है, "बॉयलर प्लेट की काबयन स्टील प्लेट की बाने की गुणित्ता
के वलए प्रूफ टेस्ट" पास करना चावहए।
171. वलगामेंट की दिता.- जब शेल या डरम की धुरी के समानाोंतर एक रेखा में ट्यूबो ों के वलए एक
शेल या डरम वडरल वकया जाता है, तो ट्यूब वछद्रो ों के बीच वलगामेंटटस की दिता वनम्नानुसार वनधायररत की
जाएगी:
(क) जब प्रत्येक पोंक्ति पर ट्यूब वछद्रो ोंकी वपच बराबर होती है (जैसा वक वचि IV/8 में है),
तब सूि वनम्नानुसार है:
p – d
------ = वलगामेंटटस की दिता समीकरण (4/3)
p
जहाों
p = ट्यूब के वछद्रो ोंकी वपच, वममी में।
d = ट्यूब के वछद्रो ोंका व्यास, वममी में।
ट्यूब वछद्रो ों की वपच या तो रोवलोंग से पहले फ्लैट प्लेट पर या रोवलोंग के बाद मीवडयन लाइन पर मापी
जाएगी।
उदाहरण: डरम में ट्यूब के वछद्रो ों की वपच जैसा वक वचि 4/8 = 133.3 वममी में वदखाई गई है। ट्यूब का
व्यास = 82.5 वममी। ट्यूब वछद्रो ोंका व्यास = 83.3 वममी.
p – d 133.3 - 83.3
------ = ---------------- = 0.375, वलगामेंटटस की दिता.
p 133.3
वचत्र 4/8 - प्रत्येक पंल्पि में समान छेद की वपच के साथ ट्यूबो ंकी दूरी का उदाहरण
पंल्पि
(ख) जब ट्यूब वछद्रो ोंकी वपच वकसी एक पोंक्ति पर असमान होती है (जैसा वक वचि 4/9
और 4/10 में), तब सूि वनम्नानुसार है:160 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
p – nd = वलगामेंटटस की दिता समीकरण (4/4)
------------
p
जहाों
p = वलगामेंट की इकाई लोंबाई, वम.मी.में ।
n= लोंबाई p में ट्यूब वछद्रो ोंकी सोंख्या।
d = ट्यूब वछद्रो ोंका व्यास, वम.मी. में।
उदाहरण: वचि में दशायया गया स्पेस। 4/9 ट्यूब वछद्रो ोंका व्यास = 83.3 वममी
p – nd 304.8 – (2 x 83.3)
------ = ------------------- = 0.453, वलगामेंटटस की दिता
p 304.8
वचत्र 4/9 - प्रत्येक पंल्पि में असमान वछद्रो ंकी वपच के साथ ट्यूब स्पेवसंग का उदाहरण
उदाहरण: वचत्र में दशाषया गया स्पेस 4/10 ट्यूब वछद्रो ंका व्यास = 83.3 वममी
p – nd 742.9 – (5 x 83.3)
------ = --------------------- = 0.439, वलगामेंटटस की दिता
p 742.9
वचत्र 4/10 - दूसरी और तीसरी पंल्पि में अलग-अलग वछद्रो ंकी वपच के साथ ट्यूब स्पेवसंग का
उदाहरण
(ग) ट्यूब के वछद्रो ों के बीच उन बोंधनो ों की शक्ति, जो एक अनुदैर्घ्य दबाि के अधीन हैं, उन बोंधनो ों की
आिश्यक शक्ति को कम से कम आधा गुना होना चावहए, जो ट्यूब के वछद्र के बीच आते हैं जो एक
पररधीय दबाि के अधीन होते हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 161
(घ) (i) जब िजन के कारण बेंवडोंग िाला दबाि नगण्य होता है और ट्यूब के वछद्रो ों को अनुदैर्घ्य धुरी के
सोंबोंध में एक विकणय रेखा के साथ व्यिक्तस्थत वकया जाता है, तो सोंबोंवधत वलगामेंटटस की दिता (z) भुज
(ऐबवसस) और अनुपात पर अनुपात b/a के साथ वचि 4/11 में दी जाती है।
2a – d d
------- या -- पैरामीटर के रूप में प्रयुि
2a a
जहाों, ए और बी को वचि 4/13 और 4/14 में दशायए अनुसार मापा जाता है।
d = ट्यूब के वछद्रो ोंका व्यास।
नोट: 1. लम्बाई-चौड़ाई या तो रोवलोंग से पहले फ्लैट प्लेट पर या रोवलोंग के बाद मध्यम रेखा
पर फ्लैट प्लेट पर मापी जानी चावहए।
2. वचि 4/11 पर वदए गए आोंकड़े वनम्नवलक्तखत सूि पर आधाररत
हैं:
√( - )
जहााँ,
( ‐ )
( ) ( ‐ )( )
( ‐ )
;
√ √
( = बेलन की कें द्र रेखा का कोण विकणय वछद्रो ोंकी कें द्र रेखा)।
(ii) वचि 4/15 में दशायए गए वनयवमत आरी-दाोंत पर वडरवलोंग वछद्रो ोंके मामले में पैराग्राफ (i) के समान
वनयम लागू होना चावहए।
(iii) ट्यूब के वछद्रो ोंके बीच वनयवमत अोंतराल के मामले में (वचि 4/13 देखें। सभी वलगामेंटटस, अनुदैर्घ्य,
पररवध और विकणय की दिता z का सबसे कम मूल् एबेवसस और अनुपात पर अनुपात पीसी/पीएल
वचि 4/12 में वदया गया है।
P – d d
L
------- or -- पैरामीटर के रूप में प्रयुि,
P a
L
जहाों,162 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
d = ट्यूब वछद्रो ोंका व्यास, वममी में।
P = 2b = वछद्रो ोंकी पररधीय पोंक्तियो ोंके बीच की दुगुनी दूरी;
C
P = 2a = धुरीय पोंक्ति वछद्रो ोंके बीच की दुगुनी दूरी;
L
नोट: लम्बाई-चौड़ाई P रोवलोंग से पहले फ्लैट प्लेट पर या रोवलोंग के बाद मध्यम रेखा पर
C
मापी जानी चावहए। वचि 4/12 के आोंकड़े उन्ही ोंसूिो ों पर आधाररत हैं, जैसा वक वचि
4/13 में दशायया गया है।
(ड.) जब एक डरम के साथ अनुदैर्घ्य रूप से फै ले वछद्र एक सीधी रेखा में गमय होते हैं, तो
उपरोि वनयमो ों के लागू होने पर प्रत्येक स्थान के वलए समान अनुदैर्घ्य वपच का उपयोग
वकया जा सकता है। समान वपच को प्रत्येक स्थान के वलए वचि 4/11 से प्राप्त समान िमता
से िास्तविक अनुदैर्घ्य वपच को गुणा करके प्राप्त वकया जाता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 163
दिता
वचत्र 4/11: एक विकणष रेखा के साथ वलगामेंट स की िमता164 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 4/12: वछद्रो ंके बीच बंधनो ंकी दिता[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 165
वचत्र 4/13: वछद्रो ंका वनयवमत विस्मयकरण वचत्र 4/14: वछद्रो ंका वनयवमत सॉ-टूथ पैटनष
वचत्र 4/15: वछद्रो ंका वनयवमत सॉ-टूथ पैटनष
172. अनुदैर्घ्ष दबाि.- (1) समीकरण (4/1) द्वारा पररकवलत अवधकतम वीकीकायय कायय दबाि के
बािजूद डरम या बेलनाकार हैडर शेल की मोटाई ऐसी होनी चावहए वक वकसी भी क्तस्थवत में आोंतररक
भाप दबाि से उत्पन्न दबाि के सोंयोजन के पररणामवीकरूप अनुदैध्यय दबाि न हो, वीक-भार डरम या हेडर
और उसकी सामग्री और सभी बाहरी रूप से लागू भार, विवनयम 170 में वनधायररत काययशील धातु
तापमान के अनुरूप अनुमेय कायय दबाि से अवधक है।
(2) डरम के वसरो ों पर अवभनय करने िाले आोंतररक भाप दबाि के कारण अवधकतम प्रत्यि
अनुदैर्घ्य दबाि की गणना वनम्नानुसार की जाएगी:
f = PD2
d
---------------------
1.273A समीकरण (4/5)
जहाों,
f = अवधकतम प्रत्यि अनुदैर्घ्य दबाि, वकग्रा/से.मी.2 में
d
P = वकलो / सेमी2 (g) में अवधकतम वीकीकायय कायय दबाि,
D = डरम या हेडर का आोंतररक व्यास, से.मी. में,
A = डरम या हेडर का नेट हृॉस-सेक्शनल िेिफल सेमी2 में, जो धुरी पर समकोण पर
एक समतल रूप में ट्यूब वछद्र के माध्यम से वलया गया हो।166 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) वकसी भी खोंड में पररणामी बेंवडोंग मोमेंट एम अोंवतम दबाि की उत्के न्द्रता और बाहरी रूप से लागू
भार के कारण बेंवडोंग मोमेंट का बीजगवणतीय योग होगा।
M = M + M समीकरण (4/6)
e w
अोंत दबाि की उत्के न्द्रता के कारण बेंवडोंग मोमेंट की गणना वनम्नानुसार की जाएगी।
PD2.e
M = ---------- समीकरण (4/7)
e
1.273
जहाों,
Me = उत्के न्द्रता के कारण पररणामी बेंवडोंग मोमेंट, kgf -cm में
P = अवधकतम वीकीकायय कायय दबाि वकग्रा/सेमी2 (जी) में,
D = डरम या हेडर का आोंतररक व्यास से.मी. में,
e = नेट हृॉस-सेक्शन की उत्कें द्रता अथायत नेटहृॉस सेक्शन की न्यूटरल धुरी से डरम या हेडर धुरी की
दूरी, सेमी में।.
बाहरी रूप से लागू भार के कारण बेंवडोंग मोमेंट (एमडब्ल्यू) की गणना डरम या हेडर को बाहरी
रूप से लागू भार को ले जाने िाले बीम के रूप में मानी जाएगी, वजसमें डरम या हेडर का वीक-
भार और काययकरण की पररक्तस्थवतयो ोंमें इसकी अन्तियस्तु शावमल है।
(4) बेंवडोंग के कारण दबाि की गणना वनम्नानुसार की जाएगी:
M Y
r
f = -------- समीकरण (4/8)
b
I
जहाों,
f = बेंवडोंग के कारण दबाि, वकग्रा/सेमी2 में ।
b
Mr = खोंड में, पररणामी बेंवडोंग मोमेंट, िण kgf -सीएम में
Y= नेट हृॉस-सेक्शन की तटस्थ धुरी से सेमी में हेडर शेल के डरम के अोंवतम फाइबर तक की दूरी।
I = नेट हृॉस-सेक्शन की तटस्थ धुरी इदय-वगदय में (सेमी4) जड़त्व का मोमेन्टा वलया गया है। पररणामी
अनुदैर्घ्य दबाि (ए) और (सी) के तहत वदए गए दबािो ोंका बीजगवणतीय योग है।
(5) एक डरम में बेंवडोंग के कारण अनुदैर्घ्य दबाि की गणना में या उसके वसरो ों के पास और ट्यूबो ों के
एक वकनारे से नीचे डरम से जुड़ा हुआ है (इस तरह डरम के बीच पयायप्त स्टरटटस बनाने के वलए
व्यिक्तस्थत) जड़त्व I के िण का मूल् उप-विवनयम (4) में सूि में प्रयुि आईए होगा: -
a
ऊपरी डरम (I ) की जड़ता का िण प्लस वनचले डरम (I ) की जड़ता के िण का अनुपात (S)।
b c
2
S = 1 - ----- समीकरण(4/9)
240[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 167
जहाों, ऊपरी और वनचले डरम के कें द्रो ोंको वमलाने िाली ऊध्वायधर और रेखा के बीच वडग्री में कोण है।
जहाों 15½° के बराबर या उससे अवधक है; S को 0 के रूप में माना जाएगा। वकसी भी क्तस्थवत में
समीकरण (4/8) में प्रयुि I का िास्तविक मूल् ऊपरी डरम (I ) की जड़त्व के िण के 1.33 गुना से
b
अवधक नही ोंवलया जाएगा।
पूियगामी में, जब तक वक अन्यथा सहमवत न हो, शब्द "ट्यूबो ों का बैंक" को सहायता के बीच डरम की
लोंबाई के कम से कम तीन चौथाई तक फै ली हुई ट्यूबो ों की चार या अवधक पोंक्तियो ों को वमलाकर
पररभाव त वकया जाएगा, और चार ट्यूब व्यास के औसत वपच से अवधक नही ों पर अनुदैध्यय रूप से
वपच वकया जाएगा।
173. मध्यिती (इंटरमीवडएट) बॉयलर डरम सहायता.- जहाों बॉयलर डरम को मध्यिती वबोंदुओ ों पर
उसकी लोंबाई में डरम शेल के समानाोंतर भाग के अोंत से एक आोंतररक व्यास से अवधक की दूरी पर
सपोटय वकया जाता है, शेल को स्थानीय रूप से सहायता के वलए मोटा होना चावहए या इस तरह से
वडजाइन वकया जाना चावहए वक जब स्थानीय दबाि सेट हो तो डरम शेल में सहायता द्वारा जोड़ा जाता
है, आोंतररक भाप दबाि और सहायता प्राप्त भार के कारण बीजगवणतीय रूप से, अवधकतम पररणामी
दबाि काययशील धातु तापमान पर अनुमेय कायय दबाि से अवधक नही ोंहोता है।
भाग-V
174. वडश एंड प्लेट का आकार
जब एोंड प् लेट को अधय-दीघयिृत्ताकार, आोंवशक गोलाकार या अधयगोलाकार रूप में तिाकार वहृया जाता
है, तो यह वनम्नवलक्तखत का अनुपालन करेगा: (वचि 4/16, 4/17, और 4/18 देखें);
वचत्र. 4/16: दीघषिृत्ताकार हैड वचत्र.4/17: टोररसफे ररकल हैड
वचत्र. 4/18: मैनहोल हैड (दीघषिृत्ताकार या टोररसफे ररकल)
(क) वबना वकसी सीमा के गोलाद्य के हैड;
(ख) दीघयिृत्ताकार हैड पयायप्त रूप से तिाकार वकए गए तावक H ≥ 0.2 D;
(ग) आोंवशक गोलाकार हैड वनम्नवलक्तखत सभी आिश्यकताओ ोंको पूरा करते हैं:
r 0.1 D
r 3 T168 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
RD
H 0.18D
R का एक मूल् <1.2 डी का मूल् उन वसरो ोंके वलए अनुमेय है, वजनमें H/D अनुपात 0.18-0.2
के बीच है।
वचि 4/16, 4/17, 4/18, 4/19, 4/20,4/21 – के अनुसार
D = हैड का बाहरी व्यास;
H = बेलनाकार शेल के साथ तिाकार वहस्से के जोंक्शन से इसकी बाहरी सतह पर मापे गए हैड
की ऊों चाई;
R = आोंवशक गोलाकार हैड के गोलाकार भाग के अोंदर विज्या;
r = आोंवशक गोलाकार वसरो ोंके पोर विज्या के अोंदर।
वचत्र. 4/19: ओपवनंग इन हैड वचत्र. 4/20: रीइन्फोसष ओपवनंग[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 169
गहराई अनुपात H/D
नोट 1: श्रृोंखला में वनरोंतर रेखा के साथ खीचों ा गया िहृ सादे वबना वछद्र िाले हैड के वलए K का मूल्
वनधायररत करने के वलए है। वबोंदीदार रेखाओ ोंिाले अन्य िहृ उस पर खुलने िाले हैड के वलए हैं।
नोट 2: यवद H/D अनुपात 0.25 (टॉररसफे ररकल हेडटस) से कम है, तो K के मूल् को वनधायररत करने में
T/D के अनुपात पर अवतररि विचार वकया जाएगा।170 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 4/21: वडश हेड स के वलए शेप फै िर K का ग्राफ
175. सामान्य.- (1) विवनयम 177 के समीकरण (4/10) में वनवदयष्ट स मोटाई T वनमायण के बाद एोंड
प् लेट की मोटाई है और एोंड प् लेट के पूरे िेि में उस वबोंदु तक लागू होती है, जहाों आोंवशक रूप से
गोलाकार आकार के वसरो ों के वलए, वडवशोंग विज्या कोने की विज्या में शावमल हो जाती है; इस जोड़ से
एक हृवमक पतलेपन की अनुमवत उस वबोंदु पर मोटाई T की अवधकतम 10 प्रवतशत तक है, जहाों
कोने की विज्या फ्लैंग्ड एोंड प्लेट के सीधे वहस्से से जुड़ती है।
(2) अधय-दीघयिृत्ताकार आकार की अोंवतम प्लेटो ों के वलए एक समान हृवमक पतलेपन की अनुमवत
है।
(3) मोटाई में कमी की अनुमवत मैनहोल खोलने के वलए वनकले वकनारे पर भी लागू होती है। वकसी
भी मामले में, हालाोंवक, जब एोंड प् लेट को डरम शेल में बट िेल्डेड वकया जाता है, तो शेल के कनेक्शन
के वलए वनकले वकनारे की मोटाई उसी व्यास और सामग्री के एक वबना वछद्र िाले सीमलेस शेल की
मोटाई से कम होनी चावहए, जो समीकरण द्वारा (4/2) द्वारा वनधायररत की जाती है।
176. ओपवनंग के साथ वडश का अंत.- (1) (क) हैड (मैनहोल या ट्यूब होल) में कटे वछद्र गोल या
दीघयिृत्ताकार होने चावहए
(ख) उप-विवनयम (3) की शतों का अनुपालन करने िाले लघु आकार के ओपवनोंग के वलए हैड की
वकसी अवतररि मोटाई या ओपवनोंग के सुदृढीकरण की आिश्यकता नही ोंहोती है।
(ग) बड़े आकार की ओपवनोंग के वलए उप-विवनयम (2) के अनुसार मोटाई में िृक्तद् और उप-वनयम (4)
के अनुसार ओपवनोंग के सुदृढीकरण की आिश्यकता होती है।
(2) (क) हैड की मोटाई की गणना में उपयोग वकया जाने िाला आकार घटक ‘K हैड H की ऊों चाई
और सबसी बड़े ओपवनोंग की लम्बाई-चौड़ाई के आधार पर वभन्न-वभन्न होते हैं। K का मूल् िहृो ों के
माध्यम से वचि 4/21 में दशायया गया है। िहृो ों के माध्यम से, वजनमें से प्रत्येक अनुपात के मूल् से मेल
खाता है -
d
-------
DT
जहाों,
d = व्यास या हैड में सबसे बड़ी ओपवनोंग (दीघयिृत्ताकार ओपवनोंग के मामले में, दीघयिृत्ताकार
का
बड़ा व्यास);
D= हैड का बाहरी व्यास; तथा
T = वडवशोंग के बाद न्यूनतम मोटाई।
(ख) इसके अलािा, वनम्नवलक्तखत शतों को पूरा वकया जाएगा;[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 171
T
< 0.1 और
D
d
< 0.5
D
(ग) िही क्तस्थवत और समान िहृ के िल हैड की प्लेट में कटी ओपवनोंग के साथ-साथ उन पर भी लागू
होते हैं, जो अोंदर की ओर फों सी होती हैं। बाद के मामले में, फ्लैंवजोंग की विज्या 'r' (वचि 4/18 देखें) 25
वममी से कम नही ों होनी चावहए। वनकले वकनारे भाग की मोटाई पररकवलत मोटाई ‘T’ से छोटी हो
सकती है।
(घ) वडश हेडटस में अनरीइन्फोस्डय ओपवनोंग और फ्लैंर्ज्-इन ओपवनोंग को व्यिक्तस्थत वकया जाएगा,
तावक हैड के वकनारे से दूरी वचि 4/19 में दशायए अनुसार से कम न हो।
(ङ) सभी मामलो ों में, दो आसन्न ओपवनोंग को अलग करने िाले बैंड की चौड़ाई, प्रोजेक्शन में, कम से
कम सबसे लघुतम व्यास के बराबर होनी चावहए, जैसा वक वचि 4/19 में दशायया गया है।
(3) (क) लघु ओपवनोंग, वजन्हें वकसी सुदृढीकरण की आिश्यकता नही ों होती है; वचि 4/21 दशायती है
वक, H/D के वदए गए अनुपात के वलए, एक सादे हैड का आकार घटक K अनुपात एक वनवश्चत मूल् से
मेल खाता है,
d
DT
(ख) इस मूल् से कम या उसके बराबर व्यास िाले वछद्रो ोंको छेदना इस प्रकार वबना वकसी सुदृढीकरण
के हैड में बनाया जा सकता है, वजसकी मोटाई एक सादे हैड के वलए आिश्यक न्यूनतम के बराबर
होती है।
(ग) हालाोंवक इन ओपवनोंग की क्तस्थवत उप-विवनयम (2) में बताई गई शतों के अनुरूप होगी।
(4) (क) बड़ी ओपवनोंग का सुदृढीकरण; बड़े वछद्रो ों के हैड की मोटाई को बााए वबना काटा जा सकता
है, बशते वक िे पयायप्त रूप से सुदृा हो।ों
(ख) सुदृढीकरण में या तो एक िेल्डेड नोजल या एक या दो सुदृा िेल्डेड प्लेटटस, या इन दोनो ों
प्रवहृयाओ ोंके सोंयोजन शावमल हो सकते हैं।
(ग) वनमायण की मजबूती वनम्नवलक्तखत सूि (वचि 4/20 देखें) के अनुसार वनधायररत की जाएगी:- माना वक
ओपवनोंग का कािवनक व्यास d' है।
A
’ - ----
T
जहाों,172 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
d = हेड में ओपवनोंग का िास्तविक व्यास (नोजल का बाहरी व्यास);
T = हेड की न्यूनतम मोटाई; तथा
A = सुदृढीकरण का प्रभािी हृॉस-सेक्शन।
(घ) यह प्रभािी िेि ए, नीचे दी गई सीमाओ ों में, सुदृा प्लेटो ों के िास्तविक हृॉस-सेक्शन के साथ
और नोजल के हृॉस-सेक्शन के साथ, हैड की आोंतररक सतह के बाहर क्तस्थत नोजल के उन वहस्सो ों के
वलए दबाि की सहायता करने के वलए आिश्यक हृॉस-सेक्शन है।
(ङ) आकृ वत घटक K को वचि 4/21 के आधार पर पाा जा सकता है जो अनुपात d' / √DT के
तदनुरूप है।
(च) सुदृढीकरण िेि की अवधकतम सीमा, वजस वहसाब में वलया जाना चावहए वनम्नानुसार हैं*
(क) L = √2RT, एक सुदृा प्लेट की चौड़ाई के वलए;
1
(ख) L = √dT , एक नोजल की लोंबाई के वलए
2 t
जहाों,
R = हेड के गोलाकार वहस्से की आोंतररक विज्या (या दीघयिृत्ताकार हेड के वलए ओपवनोंग
के कें द्र में मेरीवडयन की िहृता की आोंतररक विज्या है)।
T = नोजल की िास्तविक मोटाई,
t
L और L = वचि 4/20 में दी गई लम्बाई-चौड़ाई।
1 2
(छ) सुदृढीकरण के बाहरी वकनारो ों की क्तस्थवत उप-विवनयम (2) और वचि 4/19 के प्रािधानो ों के
अनुरूप होगी।
(ज) ऐसे मामलो ों में जहाों सुदृढीकरण के एक वहस्से का वीकीकायय दबाि, हेड की तुलना में कम है,
सोंबोंवधत िेि ए को वनम्न अनुपात से गुणा वकया जाना चावहए:
सुदृढीकरण सामग्री का वीकीकायय दबाि
---------------------------------------------
हैड सामग्री का वीकीकायय दबाि
177. एंड प् लेट अितल पि पर दबाि के अधीन है.- (1) अितल पि पर दबाि के अध्यधीन धुले हुए
वसरो ोंको वनम्नवलक्तखत सूि द्वारा वनधायररत वकया जाएगा;
2f (T – 0.75)
P = ----------------- समीकरण (4/10)
DK
जहाों,
T = वडश एोंड की िास्तविक मोटाई, वममी में
P = अवधकतम वीकीकायय काययशील दबाि वकग्रा/सेमी2 (g) में;
D = वडश एोंड का बाहरी व्यास वममी में[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 173
f = अवधकतम अनुमेय दबाि मूल्, जो उस देश के गिवनिंग कोड में उपलब्ध है, वजससे सामग्री से
सोंबोंवधत है वकग्रा/सेमी2 में;
K = आकृ वत घटक, जैसा वक विवनयम 176 के उप-विवनयम (2) और वचि 4/21 में पररभाव त वकया
गया;
0.75 = योगात्मक मोटाई वम.मी. में
(2) हेड की न्यूनतम अपेवित मोटाई, तथावप 5 वममी से कम नही ोंहोगी
(3) वडश्ड एोंड की न्यूनतम अपेवित मोटाई, वनम्नवलक्तखत समीकरण से वनधायररत की जाएगीः
P x D x K
t = ----------------- + 0.75 समीकरण (4/11)
2 x f
जहाों,
P = अवधकतम वीकीकायय काययशील दबाि वकग्रा/सेमी2 (g) में;
T = वडश एोंड की न्यूनतम पररकवलत मोटाई, वममी में
D = वडश एोंड का बाहरी व्यास वममी में
f = अवधकतम अनुमेय दबाि मूल्, जो उस देश के गिवनिंग कोड में उपलब्ध है, वजससे सामग्री से
सोंबोंवधत है, वकग्रा/सेमी2 में;
K = आकृ वत घटक, जैसा वक विवनयम 176 के उप-विवनयम (2) और वचि 4/21 में पररभाव त वकया
गया;
0.75 = योगात्मक मोटाई वम.मी. में
178. आंतररक दरिाजे.- विवनयम 137 की अपेिाएों लागू होगों ी।
भाग -VI
179. टैंड पाइप, नोजल और ओपवनंग (1) जहाों डरमो,ों शेलो,ों पाइप में वछद्र एक वनवश्चत पैटनय में
वडरल वकए जाते हैं, बोंधनो ों(वलगामेंटटस) की दिता विवनयम 171 में दी गई पद्वतयो ोंद्वारा वनधायररत की
जाएगी, बशते वक समूह में सबसे बड़ा वछद्र वनम्नवलक्तखत से अवधक न हो:-
वकसी भी गैर-सुदृा ओपवनोंग का अवधकतम व्यास, वनम्नवलक्तखत समीकरण (अवधकतम 203
वममी के अधीन) के आधार पर की गई गणना के अनुसार 'डी' से अवधक नही ोंहोगा।
d=8.08{(1-K) Dt} 1/3
K = PD / 1.82f t
जहाों,
D = डरम, शेल, हैडर, पाइप या वडश एोंड की ओपवनंग (वम.मी.) का नाममाि ओडी
t = िास्तविक मोटाई (वम.मी.)
P = अवधकतम वीकीकायय कायय दबाि (वकलो / से.मी. 2 (जी))
f = अवधकतम अनुमेय दबाि, जो उस देश के गिवनिंग कोड में उपलब्ध है, वजससे सामग्री
(kg/cm2(g) सोंबोंवधत है।174 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
जब K का इकाई या उससे अवधक मूल् हो, तो वबना सुदृाता ओपवनोंग के अवधकतम व्यास को
51 वममी के रूप में वलया जाना चावहए। बड़ी ओपवनोंग के मामले विवनयम 179 के उप-
विवनयम (2) के अनुसार प्रवतपूवतय की जाएगी।
(2) (क) जहाों स्टैंडपाइप या नोजल को िेक्तल्डोंग द्वारा सुरवित वकया जाता है, वछद्र में कटौती के
वलए पयायप्त प्रवतपूवतय प्रदान की जाएगी। प्रवतपूवतय पयायप्त रूप में विचार वकया जाएगा, जब िेि
'X' शेल की धुरी के माध्यम से मापी गई प्रवतपूवतय, वचि 4/22 और वचि 4/23 में वदए गए
प्रवतपूवतय िेि 'Y' से कम है।
(ख) ऐसे मामले में जहाों 'Y' 'X' से कम है, एक प्रवतपूवतय प्लेट को स्टैंडपाइप पर शेल में वफट
वकया जाएगा, और वफलेट िेल्ड द्वारा वफट वकया जाएगा, जैसा वक वचि 4/22 और वचि 4/23
में है।
4/22: शाखा ओपवनोंग के माध्यम से सेट की प्रवतपूवतय
वचत्र 4/23: शाखा ओपवनोंग पर सेट की प्रवतपूवतष
प्रवतपूवतष वकए जाने िाला िेि ("X) = dn x es"
नोट: यवद प्रवतपूवतष पैड प्रदान की जाती है, तो प्रवतपूवतय पैड की मोटाई को न्यूनतम मोटाई शेल
के साथ जोड़ा जाना चावहए।
" शेल प्रवतपूवतष के वलए उपलब्ध िेि = 2 x" ("ts-es")"x Ci"[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 175
" शेल सतह के बाहर वनकला नोजल से प्रवतपूवतष के वलए उपलब्ध िेि"
"= 2 x" ("tn-en")"x Bo x ""fn" /"fs"
" शेल सतह के अोंदर वनकली नोजल से प्रवतपूवत षके वलए उपलब्ध िेि"
"= 2 x tn x B x " "fn" /"fs"
"िेल्ड से उपलब्ध िेि = िेल्ड x" "fn" /"fs" का कुल हृॉस सेक्शनल िेि
प्रवतपूवत षके वलए उपलब्ध िेि (Y) = उपरोि सभी िेिो ोंका योग।
जहाों,
ts= शेल की िास्तविक मोटाई।
es= आिश्यक दबाि और तापमान का सामना करने के वलए वडजाइन वकए गए वबना वछद्र
िाले शेल की मोटाई।
dn = नोजल टाइप नोजल पर सेट के वलए अवधकतम आोंतररक व्यास या टाइप नोजल के
माध्यम से सेट के वलए वछद्र व्यास।
tn= नोजल की िास्तविक मोटाई।
en = नोजल पर आिश्यक दबाि, तापमान और बाहरी भार का सामना करने के वलए
आिश्यक नोजल की मोटाई।
fs = काययरत धातु के तापमान पर शेल सामग्री के वलए वीकीकायय दबाि।
Ci = इन दोनो ोंमें से अवधक (ts + 76, dn/2)
Bo & Bi = कम से कम (शेल की िास्तविक मोटाई का 2.5 गुना, नोजल की िास्तविक मोटाई
का 2.5 गुना)।
नोट: वकसी भी मामले में यवद नोजल की लोंबाई ऊपर वनवदयष्ट स शतय से कम है, तो ' Bo & Bi,
नोजल की िास्तविक लोंबाई तक सीवमत होनी चावहए।
w= िेल्ड की चौड़ाई
h = िेल्ड की ऊोंचाई
नॉजल या रीइन्फोवसिंग पैड के वलए प्रयुि शेल की तुलना में अवधक दबाि मूल् प्राप्त होने की
क्तस्थवत में सामग्री के सोंदभय में अवतररि मजबूती का श्रेय नही ोंवलया जाना चावहए।
िवतपूवतय प्लेट के हृॉस-सेक्शन का िेि को शेल की सामग्री और िवतपूवतय प्लेट के वलए
काययशील धातु के तापमान पर अनुमेय दबाि के बीच के अनुपात के आधार पर वनयोंवित वकया
जाएगा।
(3) जहाों स्टैंडपाइप या नोजल को वडश एोंड प्लेटटस में िेल्ड वकया जाता है, प्रवतपूवतय पर पयायप्त
रूप से विचार वकया जाएगा, यवद उपयुयि (1) और (2) आधार पर गणना की जाती है। लेवकन
िवतपूवतय की जाने िाली एोंड प् लेट के हृॉस-सेक्शनल िेि की गणना समीकरण (4/10) के
आधार पर की जाएगी, और एोंड प् लेट की आोंतररक सतह के भीतर बाहरी सतह के ऊपर
स्टैंडपाइप की ऊों चाई, ओपवनोंग कें द्र के माध्यम से गुजरने िाली रेवडयल रेखा के साथ मापी
जाएगी।
(4) फ्लैंज्स की न्यूनतम मोटाई और स्टैंडपाइप की बॉडी को विवनयम 127 के अनुसार होना
चावहए। अोंतरराष्ट सरीय कोड और एएसएमई, बीएस, ईएन, डीआईएन जैसे मानको ों के अनुरूप176 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
फ्लैंज्स का भी प्रयोग वकया जा सकता है, यवद यह आिश्यक दबाि और तापमान रेवटोंग को
पूरा कर रहा है।
180. िेल्पल्डंग द्वारा टैंडब्लॉक्स और ब्ांच पाइप्स का अटैचमेंट
(1) अटैचमेंट की विवशष्ट स पद्वतयाों वनम्न वचिो ोंमें दशायई गयी हैं:
वचि 4/24, 4/25, 4/26, 4/27, 4/28, 4/29, 4/30, 4/31, 4/32, 4/33, 4/34, 4/35 और 4/36.
दशायई गई सभी िेल्ड लम्बाई-चौड़ाई न्यूनतम लम्बाई-चौड़ाई के रूप में होगी जो खाोंचे को पररभाव त
करते हैं और िेक्तल्डोंग के वलए िास्तविक तैयारी को सोंदवभयत करते हैं।
t = स्टैंडपाइप या शाखा पाइप की वनवदयष्ट स मोटाई।
n
t = स्टैंडपाइप या शाखा कनेक्शन पर डरम या हेडर शेल की वनवदयष्ट स मोटाई।
s
t = िवतपूवतय ररोंग की िास्तविक मोटाई।
e
सवचि वनमायणो ोंमें से कु छ का उपयोग वडजाइन दबाि और तापमान या आकार (सोंयोजन में) के विचार
से सीवमत हो सकता है, और हालाोंवक कु छ लम्बाई-चौड़ाई दी गई हैं, प्रत्येक मामले पर
गुणित्ता आधार पर विचार वकया जाना चावहए।
वनरीिण प्रावधकारी और वनमायता के बीच समझौते के अधीन अन्य पद्वतयाों अपनाई जा सकती हैं।
(2) िेक्तल्डोंग उपभोग्य सामवग्रयो ोंको विवनयम 71 से 76 की अपेिाओ ोंका पालन करना होगा।
(3) प्रत्येक िेल्ड पर धातु के कम से कम दो रन जमा वकए जाने चावहए। अगले रन जमा करने से पहले
िेल्ड धातु के प्रत्येक रन को अच्छी तरह से साफ वकया जाएगा और लैग से मुि वकया जाएगा। सुपर
हीटर के साथ लगे िॉटर ट्यूब बॉयलर या बॉयलर के मामले में, फीड िॉटर कनेक्शन और स्टॉप िाल्व
को बोंद करने की आिश्यकता नही ों है और यवद कु ल िाल्व िेि को उठा वलया जाता है और गणना
द्वारा पयायप्त पाया जाता है, तो सोंचय परीिण की आिश्यकता को पूरा हुआ माना जा सकता है, यवद
िाल्व िेि को इस प्रकार समायोवजत वकया जाए वक प्रत्येक बॉयलर पर कम से कम एक सुरिा िाल्व
बॉयलर के वडजाइन दबाि पर या उससे नीचे उठेगा, और सभी िाल्व इस तरह से उठेंगे वक भाप
बॉयलर द्वारा उत्पन्न की जा सकती है एिों वडजाइन दबाि के 10 प्रवतशत से अनवधक िृक्तद् के साथ
छोड़ी जा सकती है।
(4) िेल्ड का अोंवतम वफवनश ऐसा होगा वक डरम से स्टैंडपाइप में या फ्लैंज से स्टैंडपाइप में भाग का
पररितयन हृवमक और तेज नॉच से मुि हो। िेक्तल्डोंग के पूरा होने के बाद (सील िेल्ड के मामले को
छोड़कर) डरम को तापोपचार द्वारा दबाि से मुि वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 177
वचत्र 4/24: टैंडपाइप और ब्ान्ो ंतक एिं 101.6
वचत्र 4/25: टैंडपाइप या ब्ान् या वकसी भी
वममी बोर सवहत िेल्ड वकया टैंडपाइप या ब्ान् में
ब्ान् तक िेल्ड वकया और 101.6 वममी बोर
टैंडपाइप और शाखाओ ंतक एिं 101.6 वममी
सवहत
बोर सवहत िेल्ड वकया
वचत्र 4/27: टैंडपाइप या ब्ान् में िेल्ड वकया
वचत्र 4/26: टैंडपाइप या 101.6 वममी बोर सवहत
टैंडपाइप और ब्ान् तक एिं प्रवतपूवतष ररंग के
टैंडपाइप या ब्ान् में िेल्ड ब्ान् के वलए प्रवतपूवतष
साथ टैंडपाइप या ब्ान् में िेल्ड वकया 101.6
ररंग के साथ
वममी बोर सवहत178 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 4/29: पेंचदार और सील िेल्ड
कनेक्शन
वचत्र 4/31: टैंडपाइप या ब्ान् में िेल्ड
वकया
वचत्र 4/30: प्रवतपूवतष ररंग के साथ टैंडपाइप या ब्ान्
में िेल्ड वकया
वचत्र 4/32: टैंडपाइप या ब्ान् में िेल्ड
वकया[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 179
वचत्र 4/33 हैडर पर आंतररक मशीनरी के वचत्र 4/34
साथ जोडा गया वह सा
वचत्र 4/35: शेल के भीतर िेल्पल्डंग के वलए दुगषम वचत्र 4/36: शेल के भीतर िेल्पल्डंग के वलए दुगषम
अप्रवतबंवधत ब्ांचेज अप्रवतबंवधत ब्ांचेज
नोट:
वछद्र में िाोंच ढीली होनी चावहए लेवकन वकसी भी वबोंदु
पर उनमें अोंतर 3 एमएम या एन/2 इनमें से जो भी कम
हो, से अवधक नही ोंहोना चावहए ।
िेल्डेड आकार B + F = 1.5en.
1 1
सभी आयाम एमएम में हैं। F 16 एमएम से अवधक नही ों होना चावहए और en/2
1
से कम नही ों होना चावहए। िेल्ड आकार B + F =
1.5en न्यूनतम या 1.5es न्यूनतम, इनमें से जो भी
कम हो।
एफ 16 एमएम से अवधक नही ोंहोना चावहए और न ही
en/2 से कम होना चावहए।
en = नोजल की मोटाई
es = शैल की मोटाई180 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय-5
िाल्व, गेज और ऑल्पक्सवलअरी
भाग- I
181. अपेवित माउंवटंग, वफवटंग और ऑल्पक्सवलअरी- (1) प्रत्येक बायलर में कम से कम
वनम्नवलक्तखत लगे होने चावहए, नामतः -
(क) दो सुरिा िाल्व, वजनमें से एक उच्च िाष्प और वनम्न स्तरीय जल िाले सुरिा िाल्व हो
सकते हैं और वकसी भी क्तस्थवत में िाल्व की सीट का बोर 19 एमएम से कम नही ोंहोना चावहए।
(ख) जल स्तर को इोंवगत करने िाले दो माध्यम;
(ग) स्टीम प्रेशर गेज;
(घ) स्टीम स्टॉप िाल्व ;
(ङ) फ़ीड चेक िाल्व;
(च) एक फ़ीड उपकरण;
बशते वक गैसीय, तरल या ठोस ईोंधन से चलने िाले बॉयलरो ों में रुकािट आने पर जहाों तप्त
सतह 20 िगय मीटर से अवधक हो, िहाों न्यूनतम दो फीड िाले उपकरण लगे होने चावहए वजनकी सोंयुि
िमता बॉयलर की अवधकतम वनरोंतर रेवटोंग से कम नही ोंहोनी चावहए: बशते यह और वक अन्य बॉयलरो ों
के वलए जहाों ईोंधन आपूवतय बोंद करने के बाद भी अिवशष्ट स तप्त ही रहता है, तब िहाों दो फीड उपकरण
लगे होने चावहए वजसमें प्रत्येक की िमता बॉयलर की अवधकतम वनरोंतर रेवटोंग से कम नही ों होनी
चावहए।(बैटरी में उपयोग वकए जाने िाले बॉयलरो ोंके वलए विवनयम 242 देखें)
(छ) एक ब्लो-डाउन कॉक अथिा िाल्व;
(ज) फ्यूवसबल प्लग जैसावक विवनयम 236 के तहत प्रािधान है;
(झ) सिम व्यक्ति द्वारा टेस्ट गैज को मापने के वलए एक अटैचमेंट;
(ञ) एक मैनहोल बॉयलर वजसमें उवचत आकार के और ऐसे मड वछद्र या साईट वछद्र को
लगाने की अनुमवत दी जानी चावहए वजससे वक बॉयलर को ठीक तरीके से साफ वकया जा
सके ।
(2) इोंटीग्रल सुपर हीटर से लैस बॉयलरो ों के मामले में, सुपर हीटर आउटलेट हेडर के अोंवतम छोर
पर एक अवतररि सुरिा िाल्व लगाया जाना चावहए।
(3) वबना क्तस्थर िाष्प और िाटर लाइन िाले बॉयलरो ों के मामले में, ऐसे उपकरणो ों की वफवटोंग पर
जोर नही ों वदया जा सकता है वजनकी अवनिायय रूप से आिश्यकता नही ों है या वजनका उपयोग नही ों
वकया जाता है, जैसे वक िाटर गेज, िाटर कॉलम और गेज कॉक पर जोर नही ोंवदया जा सकता है।
(4) शेल प्रकार के एकल बॉयलर के मामले में जो अन्य बॉयलरो ों के साथ बैटरी से जुडे़े नही ों है,
वजसकी तापीय सतह 102 िगय मीटर से अवधक नही ोंहै, दो फ़ीड योंि तक वबजली की आपूवतय करने के
वलए दो अलग स्रोत को लगाने की आिश्यकता नही ोंहोनी चावहए।
(5) अध्याय-14 के तहत आने िाले छोटे बॉयलरो ों के मामले में, स्टीम प्रेशर गेज को साइफन ट्यूब
या समतुल् योंि द्वारा स्टीम स्पेस या स्टीम कनेक्शन से पानी के कॉलम से जोड़ा जा सकता है जो गेज
ट्यूब में पानी भरेंगे और यवद इसमें िास या िाोंज का उपयोग वकया जाता है, तब साइफन ट्यूब का[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 181
न्यूनतम आकार 6 एमएम को स्टैण्डडय पाइप वजतना होना चावहए; अन्य सामवग्रयो ोंके वलए पाइप या ट्यूब
के भीतर का न्यूनतम व्यास 13 एमएम होना चावहए।
(6) इलेररोड बॉयलर के वलए विवनयम 356 देखें।
(7) रीहीटसय िाले बॉयलरो ों के मामले में, ररहीटसय को 105% िमता (कु ल िमता का 15% रीहीटर
आउटलेट और फस्टय स्टॉप िाल्व के बीच स्टीम फ्लो मागय में क्तस्थत होना चावहए) के एक या अवधक
ररलीविोंग वडिाइस से सोंरवित वकया जाना चावहए तावक आोंतररक रूप से बाधा आने के मामले में पड़ने
िाले अत्यवधक दबाि से बचा जा सके ।
182. स्वचावलत बॉयलरो ंके वलए अवतररि आिश्यकताएं – (1) ऐसे प्रत्येक बॉयलर वजनमें
उपयुि जल स्तर और/या फायररोंग वनयोंिण का प्रािधान है, ऐसे बॉयलर को वीकचावलत रूप से काम
करने की वीकीकृ वत देने के वलए वनम्नवलक्तखत अपेिाओ ों का अनुपालन करना होगा:
(क) वीकचावलत वनयोंिण करने में विफल होने की क्तस्थवत में, बॉयलर को तत्काल मैनुअल
वनयोंिण में लाने के वलए सिम बनाया जाना चावहए।
(ख) ऐसे मामलो ों में जहाों वनयोंिण और अलामय सोंबोंधी उपकरण बॉयलर के बाहरी किो ों में
लगे होते हैं, िहाों वनम्नवलक्तखत लागू होगा अथायत :
(i) बॉयलर में बॉयलरो ों किो ों से जुड़े िाष्प और जल को अलग करने का
प्रािधान होना चावहए। इस तरह के आइसोलेवटोंग िाल्व खुलकर बोंद होने में सिम होगों े
और प्राथवमक तौर पर समानाोंतर लाइड के प्रकार के होगों े, लेवकन यवद जल कनेक्शन
के वलए स्क्रू डाउन स्टॉप िाल्व वफट वकए जाते हैं, तब उसे क्तस्पोंडल हॉररजॉन्टल रूप में
ऊपर लगाया जाना चावहए तावक िायु को रोकने की सोंभािना से बचा जा सके । किो ों
तक जाने िाले िाष्प और जल कनेक्शन 25 एमएम बोर से कम नही ोंहोने चावहए। ऐसे
मामलो ों में जहाों सीिें वसोंग कों टरोल िॉटर िॉल्व वफट वकए जाते हैं, िहाों स्टीम
आइसोलेवटोंग िॉल्व को छोड़ा जा सकता है;
(ii) बॉयलर में वनयोंिण या अलामय के प्रचालन की जाोंच करने के साधन का प्रािधान
होगा और िाटर कनेक्शन में पृथक रूप से भरने के वलए और चैम्बर में जल को इकठा
होने से रोका जा सके इसके वलए अलग माध्यम उपलब्ध कराया जाएगा। प्रिाह के
वलए सीिें वसोंग िाल्व या समतुल् उपकरण लगाए जाना चावहए जो इस तरह व्यिक्तस्थत
होगों े वक बॉयलर से पानी का कनेक्शन तब तक बोंद नही ोंवकया जा सकता जब तक वक
कि के वलए वनकासी का कनेक्शन खुला न हो;
(iii) बॉयलर के किो ोंसे एक वनकासी प्रणाली होनी चावहए वजसमें प्रिाह को दृश्य रूप
से दशायने का प्रािधान होना चावहए, जहाों कही ों भी व्यिहायय हो, उवचत आकार के
टोंवडश को एक उपयुि स्थान पर लगाया जाना चावहए।
(ग) जहाों बॉयलर में जल स्तर और फायररोंग वनयोंिण के वलए विदटयुत उपकरण लगाने का
प्रािधान होता है, िहाों इस उपकरण को इस तरह से वडजाइन वकया जाना चावहए वक ईोंधन और
िायु की दोनो ोंकी आपूवतय करने िाले सवकय ट में कोई भी खराबी आने पर बॉयलर वीकतः ही बोंद हो
जाएगा। यवद जल स्तर और/ या फायररोंग वनयोंिण उपकरण तक वबजली की आपूवतय नही ोंहोती
है, तब बॉयलर तक जानेिाले ईोंधन और िायु आपूवतय को कम करने के वलए मैनुअल रीसेवटोंग
आिश्यकता िाले सकारात्मक साधन लगे होने चावहए। जल स्तर और फायररोंग वनयोंिण से जुड़े182 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
सभी विदटयुत सोंचालक और उपकरण उपयुि आकार के होने चावहए और उन्हें उवचत स्थान
पर लगाए जाने चावहए जो खतरे से बचाि करने के वलए लगाए जाने चावहए वजसमें नमी को अोंदर
आने से रोकना और उच्च तापमान के प्रभािो ों से उवचत तरीके से बचाि करना भी शावमल होना
चावहए।
(घ) जहाों बॉयलर की िाष्पीकरण िमता 3700 के जी/घोंटा से अवधक है, िहाों इसमें वीकचावलत
जल स्तर अलामय और फायररोंग वनयोंिण उपकरण लगा होना चावहए और वजसकी बॉयलर के
जल स्तर को बदले वबना वनयवमत रूप से जाोंच की जा सकती है। जल स्तर सोंबोंधी अलामय को
वीकचावलत वनयोंिण प्रणाली में शावमल वकया जा सकता है। जल का स्तर स्पष्ट स करके इसे वीकतः
कायय करने के वलए व्यिक्तस्थत वकया जाता है और वजसका वनरोंतर पययिेिण नही ोंवकया जाता है,
उसमें उप-विवनयम (2) और (3) में वनवदयष्ट स जल स्तर और फायररोंग वनयोंिण के अवतररि एक
पूणयतः वीकतोंि और पृथक रूप से प्रचावलत ओिर-राइवडोंग वनयोंिण उपकरण लगा होना चावहए।
ओिर-राइवडोंग सोंबोंधी वनयोंिण हेतु वनम्नवलक्तखत आिश्यकताओ ोंका अनुपालन वकया जाएगा:
(i) बनयर तक ईोंधन की आपूवतय या ठोस ईोंधन स्टोकर तक ईोंधन और िायु आपूवतय को कम
करने और जब बॉयलर में जल का स्तर पूिय-वनधायररत वनम्न जल स्तर तक कम हो जाए तो एक
श्रिण योग्य अलामय लगाना;
(ii) इसे लॉक-आउट प्रकार का होना चावहए और इसे इस तरह से तैयार वकया जाना चावहए
वक बॉयलर को पुनः प्रचालन में लाने से पूिय वनयोंिण या उसके विदटयुत सवकय ट को मैन्युअल रूप
से रीसेट वकया जा सके ;
(iii) इसमें पूणयतः अलग विदटयुत वनयोंिण सवकय ट लगाने का प्रािधान होना चावहए।
(ङ) जहाों बॉयलर को बाह्य रूप से माउोंट वकया जाता है, िहाों ओिर-राइवडोंग पर वनयोंिण रखना चावहए
---
(i) इसके अपने अलग कि होने का प्रािधान होना चावहए ;
(ii) खोंड (ख) की आिश्यकताओ ों का अनुपालन
(2) वीकचावलत जल स्तर का वनयोंिण इस प्रकार से वकया जाएगा :-
(क) फ्लोट या वडसप्लेसर प्रचावलत; या
(ख) विदटयुत जाोंच या थमोस्टेट द्वारा प्रचावलत ; अथिा
(ग) वनरीिण प्रावधकारी की सोंतुवष्ट स के वलए अन्य अनुमोवदत वसद्ाोंत द्वारा प्रचालन।
पूिय वनधायररत सीमाओ ों के मध्य बॉयलर में जल के स्तर को प्रभािी ढोंग से बनाए रखने के वलए
वनयोंिण उपकरण बॉयलर तक फ़ीड-जल की आपूवतय को विवनयवमत करेगा ।
(3) वीकचावलत फायररोंग कों टरोल वनम्नवलक्तखत आिश्यकताओ ों का अनुपालन करेगा : -
(क) हर समय उन्हें दहन उपकरणो ों तक होने िाले ईोंधन और िायु की आपूवतय को प्रभािी
ढोंग से वनयोंवित करना होगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 183
(ख) िे वनम्नवलक्तखत शतों के तहत बनयर तक होनेिाली ईोंधन की आपूवतय या स्टोकर तक
होनेिाली ईोंधन और िायु की आपूवतय को बोंद कर देंगे: :-
(i) गैस, तेल या पुल्वेराइजड ईोंधन से चलने िाले बॉयलरो ों के मामलो ों में फ्लेम का न
जलना या पायलट फ्लेम का न जलना। यह वनयोंिण लॉकआउट प्रकार के होने चावहए
वजसे मैन्युअल रूप से रीसेट वकया जाएगा ;
(ii) पूिय वनधायररत समय के भीतर बनयर में ईोंधन जला न पाना। यह वनयोंिण लॉक-
आउट प्रकार का होना चावहए वजसे मैन्युअल रूप से रीसेट वकया जाएगा;
(iii) जब बॉयलर में जल स्तर पूिय-वनधायररत स्तर से नीचे आ जाता है। तब वनयोंिण
सोंबोंधी उपकरण लगे होने से श्रिण योग्य अलामय भी बजने लगेंगे ।
(iv) फोस्डय या इोंड्यूस्ड डराट फे न या वकसी वीकचावलत फ़्लू डैम्पर को न चला पाना।
(v) फनेस के दबाि में पूिय-वनधायररत मान तक बााना।
नोट: उपरोि प्रािधान को िोंस-थ्रू फोस्डय सकुय लेशन बॉयलर पर लागू नही ोंहोगा।
भाग- II
183. सामग्री, तापमान और दबाि सीमाएं - (1) वफवटोंग की बॉडी के वनमायण में प्रयुि सामग्री में
वनम्नवलक्तखत आिश्यकताओ ों का अनुपालन वकया जाना चावहए, अथायत:-
(i) काबयन, एलॉय और स्टेनलेस स्टील की काक्तस्टोंग में विवनयम 50 से 57 का अनुपालन
वकया जाना चावहए ।
(ii) स्टील फोवजिंग विवनयम 58 से 62 का अनुपालन करेंगे।
(iii) आयरन काक्तस्टोंग विवनयम 63 से 70 का अनुपालन करेंगे।
(iv) िोजों काक्तस्टोंग वनम्नवलक्तखत तावलका 5/1 का अनुपालन करेंगे।
तावलका 5/1
हृम सं रासायवनक संरचना ग्रेड क ग्रेड ख
(1) (2) (3) (4)
1 वटन 5.5 से 8.0% 4 से 6%
2 लेड 1.0 से 3.0% 4 से 6%
3 वजोंक 3.0 से 6.0% 4 से 6%
4 ऊपर वदए गए तत्वो ों के अलािा और कॉपर और 0.50% 0.50%
इक्तन्ऱडेंटल वनकल को छोड़कर सभी तत्वो ोंका योग
5 कॉपर प्लस इक्तन्ऱडेंटल वनकल शे शे
6 भौवतक गुण 22 20.5
अल्ट्ीमेट टेंसाइल स्टरेंथ के जी/एमएम2 के जी/एमएम2184 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
7 रेत की लागत मानक परीिण पीस सी पर
(कास्ट ऑन) न्यूनतम प्रवतशत बात 8% 15%
8 अल्ट्ीमेट टेंसाइल स्टरेंथ 23 के जी 20.5 के जी/
/एमएम 2 एमएम2
9 रेत की लागत मानक परीिण पीस सी पर
(अलग से कास्ट) न्यूनतम प्रवतशत बात 12% 15%
(V) िाल्व की सीट और वडस्क नॉन-कोरोडीब्ल धातु से बनी होनी चावहए
*नॉन-कोरोडीब्ल धातु से अवभप्राय ऐसे धातु से है जो जोंग और / या िरण के वलए विशे रूप
से प्रवतरोधी है
(2) कास्ट आयरन का उपयोग वनम्नवलक्तखत क्तस्थवतयो ोंमें नही ोंवकया जाएगा :-
(i) 220 वडग्री सेक्तियस से ऊपर तापमान होने पर
(ii) 13 बार गेज से अवधक दबाि होने पर।
(iii) 200 एमएम नॉवमनल बोर से अवधक िाले िाल्व जो बॉयलर से सीधे जुड़े होते हैं।
(iv) िेज या डबल वडस्क गेट िाल्व जो बॉयलर से सीधे जुड़े होते हैं।
(v) बॉयलर ब्लो डाउन वफवटोंग।
स्पष्ट सीकरण- बॉयलर से सीधे जुड़े हुए एक्सप्रेशन िाल्व को किर करती है वजसे वीकतः बॉयलर से
अलग नही ोंवकया जा सकता है।
नोट: गोलाकार लोहे का उपयोग 282°C तक तापमान और 17.58 वकग्रा/ सीएम2 (जी) तक दबाि के
वलए वकया जा सकता है, बशते वक यह भौवतक गुणो ों के सोंबोंध में वनम्नवलक्तखत आिश्यकताओ ों का
अनुपालन करता हो।
(क) 0.2% प्रूफ स्टरेस 250 वकग्रा/एमएम2;
(ख) न्यूनतम बात प्रवतशत 12
(3) जहाों िाल्व सीधे बॉयलर से जुड़े होते हैं, िहाों कॉपर एलॉय का उपयोग 225°C से ऊपर के
तापमान के वलए नही ोंवकया जाना चावहए। जब िाल्व सीधे बॉयलर से नही ोंजुड़े होते है तब इस तापमान
सीमा को 260°C तक बााया जा सकता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 185
भाग-III
184. काल्पटंग्स – (1) सभी काक्तस्टोंग समतल आकार िाले, ठोस और दो ो ोंया अन्य हावनकारक िुवटयो ों
से रवहत होने चावहए। वकसी भी भाग की मोटाई में धीरे-धीरे पररितयन होना चावहए और इसके वलए
पयायप्त वफिेटटस का प्रािधान वकया जाना चावहए।
(2) बॉयलर माउोंवटोंग मजबूत और सख्त नली द्वारा बॉयलर फ्लेंज से जुड़ा होगा। वकसी भी
पररक्तस्थवत में 19 एमएम बोर तक वजसमें 19 एमएम शावमल है, िोजों माउोंवटोंग की बाह्य नली
का आकार 5 एमएम से अथिा 19 एमएम बोर से अवधक के वलए 6 एमएम से कम नही ोंहोगा
।
185. कोक की पैवकं ग - (1) दबाि गैजो के वलए उपयोग वकए जाने िाले कोक को छोड़कर और
इसमें लगाए जाने िाले प्लग के वलए ग्लैंड को छोड़कर सभी कोक को वकसी गैर-एस्बेस्टस ताप
प्रवतरोधक सामग्री से पैक वकया वकए जाएोंगे और इसे अच्छे तरीके से वडजाइन वकया जाना चावहए और
25 एमएम िाले बोर के वलए इसमें विवशष्ट स प्रािधान वकए जाने चावहए।
(2) िाटर गैज कॉलम कोक को वकसी भी गैर-एस्बेस्टेस ताप प्रवतरोधी सामग्री अथिा ठोस
प्लगटाइप से पैक वकया जा सकता है।
186. किसष और ल्पस्पंडल्स -
(1) 38 एमएम और उससे अवधक िाले बोर िाले िाल्वो ों और सीधे बॉयलरो ों से जुड़े िाल्वो ों में 63 एमएम
और उससे अवधक बोर के अन्य िॉल्व तथा उसके ऊपर लगाए गए किर ऐसे होने चावहए वजनमें
बोल्ट्टस अथिा स्टडटस लगे हो ों और क्तस्पोंडि के स्क्रू िाला भाग स्टवफों ग बॉक्स के बाहर लगाया जाना
चावहए। अत्यवधक गमय िाष्प के वलए सभी िॉल्वो ोंको बाह्य स्क्रू क्तस्पोंडल के साथ वफट वकया जाना चावहए।
(2) (क) जहााँ िॉल्व के किर स्डटस से जुड़े होते है, िहाों कम से कम एक व्यास की लोंबाई िाले धागे को
लगाकर उसे उसके भीतर स्क्रू ड वकया जाना चावहए।
(ख) स्टड वछद्रो ोंमें वकसी भी काक्तस्टोंग हेतु दबाि देने के वलए वछद्र नही ोंवकया जाना चावहए।
(3) िाल्व को क्तस्क्रउड किसय िाले किसय से उपयुि तरीके से बोंद वकया जाना चावहए तावक किर को
घूमने न देने से रोका जा सके ।
187. प्रचालन की वदशा - िॉल्व में बहाि की वदशा का सोंके त देने िाले स्पष्ट स वचन्ह बने होने चावहए।
बॉयलरो ों से सीधे जुड़े िॉल्व में सोंके तक लगे होने चावहए वजससे स्पष्ट स रूप से िॉल्व के बोंद अथिा खुले
होने का पता लगाया जा सके और सभी िॉल्व एोंटी-क्लॉक िाइज वदशा में घूमाने से खुलने चावहए ।
188. घूमने िाले पुजे - िॉल्व और क्तस्पोंडि में काययशील गाइड लगे होने चावहए और प्रत्येक मामले
में ऐसे माध्यमो ोंका प्रािधान होना चावहए वजससे उनके गाइडो ोंको उनसे अलग होने से बचाया जा सके ।186 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
काययशील पुजों को ठीक तरीके से घूमने के वलए उपयुि स्थान होना चावहए तावक सेिा की सभी शतों
के तहत घूमना सुवनवश्चत हो सके ।
189. फ्लैंवजज़ - (1) फ्लैंवजज को उपयुि दबाि हेतु तावलका के अनुरूप होना चावहए
(पररवशष्ट स च)।
(2) सुरिा िॉल्वो ों के मामले में इनलेट फ्लैंवजज की वडरवलोंग, मोटाई तथा बोक्तल्ट्ोंग के वलए
उपयुि दबाि और सामग्री तथा अपनाए गए फ्लैंवजज के व्यास को तावलका के अनुरूप
होना चावहए। आउटलेट फ्लैंवजज के मामले के वलए गए दबाि से िाल्व के आउटलेट साइड
पर दबाि पड़ना चावहए।
(3) ब्लो डाउन और स्कम पाइप वफवटोंग्स के वलए फ्लेंजो ोंके वि य में जानकारी का वनधायरण
करने के उद्देश्य से, वफवटोंग्स के वडजाइन दबाि को बॉयलर के वडजाइन दबाि के रूप में
माना जाना चावहए।
(4) सभी फ्लेंजो ों के फे स, स्पाट फे स मशीनीकृ त होने चावहए अथिा वपछले भाग पर
मशीनीकृ त होने चावहए और िॉल्व वछद्रो ोंका िेधन वकया जाना चावहए।
190. िॉल्व वसवटंग- जहाों अलग से सीटटस लगाई जाती हैं, उन्हें कु शल तरीके से लगाया जाएगा और
प्रत्येक मामले में ऐसा प्रािधान वकया जाएगा वजससे की िॉल्व को उनके गाइड से अलग होने देने से
बचा जा सके ।
191. चेट और सामान्य वफवटंग्स - (1) (क) सभी चेस्ट और वफवटोंग्स समतल आकार िाले, ठोस
और दो ो,ों दरारो ों या अन्य हावनकारक िुवटयो ों रवहत होने चावहए और इसे पूरा करने के पश्चात चेस्ट की
िॉल्व की उस अवधकतम अनुमत काययशील दबाि के एक से कम डेा गुना दबाि पर हाइडरावलक रूप
से जाोंच की जानी चावहए, वजतना उनसे अपेवित है।
(ख) हाइडरावलक जाोंच जल से की जानी चावहए वजसमें के रोवसन िाले कोरोवसन इनहीबीटर शावमल
हो सकते हैं अथिा अन्य उपयुि द्रि का प्रािधान होगा वजसकी विस्कोवसटी जल से अवधक नही ोंहोनी
चावहए वजसका जाोंच तापमान 52°C से अवधक न हो।
(2) (क) (i) िॉल्वो ों को सीमलेस स्टील पाइपो ों से वनवमयत्त वकया जाए वजसके वलए दबाि
17.6 के जी/ सीएम2 (जी) और तामपान 426°C से अवधक नही ोंहोगा। िेक्तल्डोंग विवनयम 97 के
अनुरूप होगी और वनमायण के पश्चातट िॉल्व चेस्ट को दबाि मुि की जाएगी।
(ii) पाइप कायय में उपयोग वकए जाने िाले िाल्वो ों को सीमलेस स्टील पाइपो ों से िेक्तल्डोंग द्वारा
वनवमयत वकया जा सकता है, परोंतु उपयुयि सोंबोंवधत दबाि और तापमान पर वकसी तरह का
प्रवतबोंध नही ोंलगाया जाएगा और इन्हें इन विवनयमनो ोंके अध्याय-4 में विवनवदयष्ट स िेल्ड के दबाि[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 187
मुि और रेवडयो-ग्रावफक वनरीिण जैसे फ्यूजन िेक्तल्डोंग से सोंबद् सभी आिश्यकताओ ों के
अनुरूप लागू वकया जाएगा ।
(ख) चेस्टो ोंके वलए अवधकतम अनुमत काययशील दबाि का वनधायरण समीकरण (7/3) से वकया
जाना चावहए, जहाों ‘2 ’ को ‘1.8 ’ से प्रवतस्थावपत वकया जाना चावहए ।
(3) िाोंज और कास्ट आयरन िाल्व चेस्ट की अवधकतम अनुमत काययशील दबाि और मोटाई
का वनधायरण वनम्नवलक्तखत सूि से वकया जाएगा, जो विवनमयन 184 के उप-विवनमयन (2) में
विवनवदयष्ट स न्यूनतम मोटाई के अध्यधीन होगी।
R x (T – C)
P= -------------- समीकरण (5/1)
4.5 x D
4.5 x P x D
T = ---------------- + C समीकरण (5/2)
R
जहााँ
P अवधकतम अनुमत काययशील दबाि है
R सामग्री के ग्रेड की न्यूनतम विवनवदयष्ट स तन्यता िमता है,
D चेस्ट का बाहरी व्यास है
T िहन िमता को छोड़कर चेस्ट की न्यनूतम मोटाई और
C न्यूनतम सकारात्मक िहन िमता है, जैसावक नीचे विवनवदयष्ट स है:
िाोंज चेस्ट हेतु C = 1.5 एमएम
कास्ट आयरन चेस्ट हेतु C = 5 एमएम
(4) सकुय लर हृाश-सेक्शन के स्टील िॉल्व चेस्टो ों की अवधतकम अनुमत काययशील दबाि और मोटाई
का वनधायरण वनम्नवलक्तखत सूि से वकया जाना चावहए, अथायतट:-
2f (T – C)
P= --------------
D-T+C समीकरण (5/3)
P x D
T= ------------- + C समीकरण (5/4)
2f + P
जहाों,
P अवधकतम अनुमत काययशील दबाि Kg/cm2 (g) है188 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
f= अवधकतम अनुमत दबाि जैसावक ऐसी सामग्री से सोंबोंध रखने िाले देश के शासी कोड में उपलब्ध
है जो Kg/वममी2 से सोंबोंध रखता है। मान की अनुपलब्धता के मामले में अनुमत दबाि मान का मूल्ाोंकन
करने के वलए वनम्नवलक्तखत प्रणाली अपनायी जानी चावहए।
454°C तापमान अथिा उससे कम तापमान के वलए वनम्नवलक्तखत दो मान हैं:-
E R
t
f = f =
1.5 2.7
454°C से अवधक तापमान के वलए वनम्नवलक्तखत तीन मान हैं -
E S
t r
(a) f = --- (b) f = ----- (c) f = S
c
1.5 1.5
जहाों,
E = तापमान ‘t’ पर यील्ड प्ाोंइट (0.2 प्रवतशत प्रूफ स्टरेस) का न्यूनतम मान
t
R = सामान्य तापमान पर सोंबोंवधत स्टील के ग्रेड के वलए न्यूनतम विवनवदयष्ट स तन्यता िमता
S = 100,000 घोंटो ोंमें रप्चर लाने के वलए सोंबोंवधत स्टील के ग्रेड हेतु औसत दबाि।
r
यवद इस मान का वनधायरण करते हुए प्राप्त पररणाम में स्कै टर बैंड की चौड़ाई, औसत िैल्ू के 20
प्रवतशत से अवधक या कम होती है, तब 100,000 घोंटो ों में रप्चर लाने के वलए तापमान ‘t’ में न्यूनतम
दबाि डालने के वलए s को 1.25 गुना कर देना चावहए ।
r
S = तापमान ‘t’ में 100,000 घोंटो ों में सोंबोंवधत स्टील के ग्रेड के वलए 1 प्रवतशत औसत इलॉनगेशन
c
(हृीप) लाने के वलए औसत दबाि । धातु के वलए तापमान ‘t’ जो 250°C से कम है, मान ‘ ’ के वलए
250°C का उपयोग वकया जाना चावहए।
नोट: ऐसे मामले में जहाों S मान सामग्री मानक के वलए उपलब्ध नही ोंहै और ऐसी सामवग्रयो ोंका उपयोग
c
भारत अथिा विदेशो ोंके बॉयलर में वकया जाता है, तब ऐसी सामवग्रयो ोंके वलए अनुमत दबाि वनम्नवलक्तखत
में वनम्नतर होगा
Et S
r
अथिा
1.5 1.5
नोट: कास्ट स्टील के वलए अनुमत दबाि 80 प्रवतशत होना चावहए वजसका वनधायरण उपयुयि
आधार पर वकया जाना चावहए
D = चेस्ट का बाहरी व्यास[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 189
T = न्यूनतम सकारात्मक िहनीयता जैसा वक नीचे विवनवदयष्ट स है;
कास्ट स्टील चेस्ट C हेतु = 5 एमएम
फोजडय अथिा स्टेनलेस चेस्ट C हेतु =2.5 एमएम
नोट: पररकवलत मोटाई के अलािा, वनरीिण प्रावधकारी की सोंतुवष्ट स के अनुसार विवनमायताओ ों
द्वारा सकुय लर और दबाि साोंद्रता को छोड़कर असेम् बली दबािो,ों िॉल्व को बोंद करने के वलए
लगाए जाने िाले दबाि के वलए अवतरर् त मोटाई का प्रािधान वकया जाना चावहए ।
(5) (क) िॉल्वो ों और वफवटोंग्स की सोंख्या वजसे सिम व्यक्ति (मैके वनकल जाोंचो ों को छोड़कर)
को उपलब्ध कराया जाना चावहए, वनम्नानुसार होनी चावहए, अथायत :-
तावलका 5/1क
हृम सोंख्या िॉल्वो ोंऔर वफवटोंग्स का आकार सोंख्या
(1) (2) (3)
1 51 एमएम तक और उसे शावमल करते हुए 10%
2 51 एमएम से ऊपर और 76 एमएम तक चेस्टो ोंकी सोंख्या का 15%
और उसे शावमल करते हुए
3 76 एमएम से अवधक 114 एमएम तक और चेस्टो ोंकी सोंख्या का 20%
उसे शावमल करते हुए
4 114 एमएम से अवधक 100%
(ख) यवद वनरीिण प्रावधकारी इस बात से सोंतुष्ट स हो जाते है वक वनमायता के पास जाोंच के वलए
पयायप्त सुविधाएों हैं और 10.5 kg/cm2(g) से अवधक अथिा 204°C से अवधक तापमान िाले
सवियस दबाि के वलए अवभष् ट िाल्व का वनरीिण वकया जाता है तथा िास्ति में प्रत्येक वफवटोंग
की जाोंच करता है, तब ऐसे मामले में वनरीिण अवधकारी अपने वििेकावधकार से नमूने के
आधार पर जाोंच कर सकता है।
(6) गोलाकार हृास सेक्शन के स्टील िॉल्व चेस्ट का अवधकतम अनुमत काययशील दबाि और
न्यूनतम मोटाई वनम्नवलक्तखत सूि द्वारा वनधायररत की जानी चावहए, नामतः
4f(T-C)
P= ------------
D-0.8(T-C) समीकरण (5/5)
PxD
T= --------- +C समीकरण (5/6)
4f+0.8P
जहाों,
P= अवधकतम अनुमत काययशील दबाि190 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
T= चेस्ट की न्यूनतम मोटाई
D= चेस्ट का बाहरी व्यास
f= उपयुयि खोंड (घ) में दी गई व्याख्या के आधार पर सामग्री के वलए अनुमत दबाि वनधायररत की
जाएगी।
C = न्यूनतम सकारात्मक िहनीयता जैसावक नीचे विवनवदयष्ट स है:
कास्ट स्टील चेस्ट C के वलए = 5 एमएम
फोजयड अथिा स्टेनलेस स्टील चेस्ट C के वलए = 2.5 एमएम
भाग IV
192. सुरिा िॉल्वो ंके वलए विवशष्ट आिश्यकताएँ - सामाय य, हाई वलफ्ट और फु ल वलफ्ट सुरिा
िॉल्वो ों को ऐसे तरीके से बनाया जाना चावहए वजससे वक इसके वकसी भी भाग में टूट-फू ट होने पर
बॉयलर से आनेिाले िाष्प को बाहर वनकलने में कोई कवठनाई न आए और बॉयलर से िाष्प अच्छे
तरीके से बाहर वनकले।
193. सामान्य वलफ्ट सुरिा िाल्व – (1) ऐसा सुरिा िॉल्व वजसमें वनधायररत दबाि के 10% से
अवधक का अवतररि दबाि नही ों लगाया जाता है, में कम से कम D/24 की दूरी से िॉल्व का ऊपरी
वहस्सा वीकचावलत तरीके से ऊपर उठता है।
(2) यहााँ ऐसा कोई मैके वनकल वनयोंिण नही ोंहोगा, जो िॉल्व के ऊपरी वहस्से को कम से कम D/8 की
दूरी से ऊपर उठाने से रोकें गा। D सीट की बॉडी का न्यूनतम बोर है।
194. हाई वलफ्ट सुरिा िॉल्व – (1) ऐसा सुरिा िॉल्व वजनमें कम से कम D/12 की दूरी पर भी
क्तस्थत होने पर िॉल्व को ऊपरी वसरा वनधायररत दबाि के 10% से भी अवधक दबाि न डालने पर खुल
सकता है।
(2) ऐसे मामले में इसे मेके वनकल तरीके से बोंद नही ों वकया जाना चावहए वजससे कम से कम D/8 की
दूरी से िॉल्व के ऊपरी वसरे को खोलने से बचा जा सकता है। जहााँ D बॉडी सीट का न्यूनतम बोर है।
195. फु ल वलफ्ट सुरिा िॉल्व – (1) ऐसा सुरिा िॉल्व वजसमें बॉडी सीट के वकसी खोंड या नीचे का
न्यूनतम िेि 100% और 80% के बीच क्तस्थत िॉल्वो ों के जररए फ्लो सीमा वनधायररत की जाती है और
इससे िॉल्वो ोंका ऊपरी भाग वीकचावलत तरीके से ऊपर उठाया जाता है।
(2) इस उठाने की प्रवहृया को वनधायररत दबाि के 5% तक का दबाि लगाकर भी तेजी से खोला जा
सकता है।
196. सुरिा िॉल्वो ंकी वनकास िमता – (1) सुरिा िॉल्व की रेवटड वनकास िमता जो सोंतृप्त
िाष्प का वनकास करती है, की गणना वनम्नवलक्तखत समीकरण का उपयोग करके वकया जाना चावहए[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 191
E= CAP समीकरण (5/7)
जहाों,
E = सोंतृप्त िाष्प (Kg/h) की रेवटड वनकास िमता है।
P = बॉयलर (बार एब्सोल्ूट) के मुहाने पर लगे वकसी भी सुरिा िॉल्व पर लगाया जाने िाला उच्चतम
दबाि है।
A = िेि (वममी2) है।
सामान्य तौर और अवधक ऊपर उठाए जाने िाले सुरिा िॉल्व के वलए ‚ ‛ बॉडी सीट का न्यूनतम बोर
िाला िेि है। पूणयत: सुरिा िॉल्व को उठाने के वलए ‚ ‛ वनकास का िह िेि है जो विवनयम 195 में
िवणयत है और इसका मान के िल सुरिा िॉल्व में विवनवदयष्ट स है और इसका मान के िल सुरिा िॉल्व
विवनमायताओ ों से प्राप्त वकया जा सकता है। " ‛ वनम्नवलक्तखत तावलका से वलया गया क्तस्थर मान है जो िॉल्व
के विवभन्न प्रकार के अनुसार होता है अथिा जो पररवष्ट-छ के अनुसार की गई जाोंचो ोंके द्वारा स्थावपत की
जाती है।
तावलका 5/2
हृम संख्या िॉल्व के प्रकार ‘C’ का ल्पथर मान
(1) (2) (3)
1 सामान्य वलफ्ट 0.05
2 हाई वलफ्ट 0.10
3 फु ल वलफ्ट 0.24
(2) सुरिा िॉल्व की रेवटड वनकास िमता जो अवत तप्त िाष्प का वनकास करेगी, का आकलन
वनम्नवलक्तखत समीकरण का उपयोग करके वकया जाना चावहए :-
E
E = --------------- समीकरण(5/8)
s
1 + 2.7 T
s
1000
जहाों,
E = अवत तप्त िाष्प (kg/h) की रेवटड वनकास िमता है।
s
E= समीकरण (5/7) (kg/h) का उपयोग करके सोंतृप्त िाष्प की रेवटड वनकास िमता का आकलन
वकया जाता है।
T = अवत तप्त (0°C) की वडग्री है।
s192 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
समीकरण (5/8) का उपयोग अवत सोंिेदनशील िाष्प दबाि में सुरिा िॉल्वो ों की रेवटड वनकास का
वनधायरण करने के वलए वकया जा सकता है। ऐसे मामलो ोंमें िाष्प का सोंतृप्त तापमान 375°C वलया जाना
चावहए।
(3) (क) बॉयलर के कु ल पीक लोड िाष्पीकरण का आकलन तप्त सतह (विवशष्ट स सुपर हीटर और
अिाष्पशील इकोनोमाइजर) वजसकी िाष्पशील िमता 30 kg/hr/m2 से अवधक नही ोंहोगी, के आधार
पर की जानी चावहए।
(ख) िेस्ट हीट बॉयलरो ों के मामले में, जहाों तप्त सतह की प्रवत िगय मीटर िाष्पशील िमता 30 वकग्रा से
कम होगी, उसे ही विवनमायत्ताओ ों द्वारा प्रमावणत वकया जाता है। अपेवित सुरिा िॉल्वो ोंकी न्यूनतम सोंख्या
का आकलन बॉयलर की िास्तविक अवधकतम िाष्पशील िमता के आधार पर वकया जा सकता है।
197. सुरिा िॉल्वो ं पर अवतररि दबाि – (1) सुरिा िॉल्वो ों को इस प्रकार से वडजाइन वकया जाना
चावहए तावक उनकी वनकास िमता विवनयम 193 से 195 में वदए गए अवतररि दबाि से अवधक के
रेवटड वनकास िमता के लक्ष्य को प्राप्त कर सके बशते वक ऐसे सुरिा िॉल्व वजनकी वनकास िमता के
80 प्रवतशत से कम है, वडजाइन वलफ्ट पर वदया जाने िाला अवतररि दबाि वनधायररत दबाि के 10
प्रवतशत से अवधक नही ोंहोना चावहए।
(2) ऐसे सुरिा िॉल्व वजनका वनकास िेि बहाि िेि के 80 प्रवतशत से अवधक है, अवतररि दबाि
वजससे वक वडजाइन वलफ्ट को वनधायररत दबाि के 5 प्रवतशत से अवधक नही ोंहोना चावहए।
198. प्रेशर डराप (ब्लो डाउन) – (1) सुरिा िॉल्वो ों को कम से कम 2.5% से कम दबाि डालकर उसे
पुन: लगाया जाएगा, लेवकन ऐसा दबाि सुरिा िॉल्वो ों के वलए वनधायररत दबाि के 5% से अवधक नही ों
होगा। (2) 25kg/cm2 तक के वनधायररत दबािो ों के वलए 5% की सीमा को बाा कर 6% तक वकया
जाएगा और 32 वममी से कम बॉडी सीट बोर िाले िाल्व के वलए यह 10% होगा।
199. सुरिा िॉल्वो ंकी माउंवटंग - (1) (क) सुरिा िॉल्वो ोंपर ऐसे पैडटस अथिा िाोंचो ोंपर लगाया जाना
चावहए, वजनका उपयोग वकसी अन्य प्रयोजन के वलए नही ों वकया जाता है और वजनमें कोई इोंटरिेवनोंग
िॉल्व नही ोंलगे होते। िॉल्व का एक्तक्सस लम्बितट रूप से खड़ा होना चावहए।
(ख) प्रत्येक पैडट अथिा िाोंच के बोर का हृास-सेक्शनल एररया सुरिा िॉल्व के इनलेट में क्तस्थत एररया के
बराबर होना चावहए अथिा जहााँ दो या दो से अवधक सुरिा िॉल्व समान पैड अथिा िाोंच से जुड़े होते है
तो ऐसे मामले में सभी सुरिा िॉल्वो ोंके इनलेट बोसय को कम से कम उन िेिो ोंके बराबर होना चावहए।
(2) (क) यथा सोंभि िाोंचो ों को छोटा होना चावहए तावक सुरिा िॉल्वो ों को ठीक तरीके से काम करने में
बाधा उत्पन्न न हो अथिा िाोंच के िे वबोंदु जो बॉयलर से जुड़े होते है उस पर कोई अवतररि दबाि न
पड़े।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 193
(ख) िॉल्व तक जाने िाली मागय में कोई बाधा नही ों आनी चावहए। विशे त: ऐसे िाोंच पर वजन पर फु ल
वलफ्ट सुरिा िॉल्वो ोंको लगाया जाता है, तब ऐसे िाोंचो ोंके इनलेट गोलाकार आकार के होने चावहए।
(ग) अपनाए गए फ्लेंजो ों के व्यास हेतु पररवशष्ट स-च में दी गई तावलका के अनुसार इनलेट और आउटलेट
फ्लैंवजज का िेधन वकया जाना चावहए।
200. ओपवनंग इन शैल – (1) सुरिा िॉल्वो ों से जुड़े अवभन्न घटको ों को छोड़कर कोई अन्य सहायक
सामग्री बॉयलर शैल तक जाने में कोई बाधा उत्पन्न नही ोंकरेगी।
(2) वनकलने िाली िाष्प आोंतररक पाइपो ों के माध्यम से वबना वकसी बहाि के सुरिा िॉल्व तक सीधे
पहुाँच जानी चावहए।
201. वनिषहन मागष – (1) (क) सेफ्टी िॉल्व वडस्चाजय पाइप इस विवनयम के उप-विवनयम (2), (3) और
(4) की आिश्यकताओ ोंके अनुरूप होने चावहए।
(ख) वडस्चाजय पाइप वजतना सोंभि हो उतना छोटा और सीधा होना चावहए और पाइप में पानी के सोंचय
को रोकने के वलए खुली नली लगी होनी चावहए। वडस्चाजय पाइप वसस्टम में उपयुि व्यिस्था का
प्रािधान होना चावहए तावक बॉयलर सहायक द्वारा वडस्चाजय के समय वनकलने िाली ध्ववन को आसानी से
सुना जा सके ।
(2) जहाों एक िेस्ट स्टीम पाइप लगाया जाता है,िहााँ पाइप और इस तक जाने िाले मागय में एक
हृॉस सेक्शनल िेि होना चावहए वजसका िेि विवनयम 196 में अपेवित सुरिा िाल्वो ोंके न्यूनतम सोंयुि
िेि से कम नही ोंहोना चावहए।
(3) फु ल वलफ्ट िाल्वो ों के वलए िेस्ट स्टीम पाइप का िेि और उस तक जाने िाले मागय का हृॉस-
सेक्शनल िेि दोगुने ‚ ‛ िेि से कम नही ोंहोना चावहए, या ऐसा िेि इस न्यूनतम िेि से अवधक होगा
जो उच्चतर स्तर पर अनुमोवदत क्तस्थराोंक िाले िाल्वो ों के वलए अपेवित हो सकता है, जैसा वक विवनयम
196 में ‚ ‛, ‚ ‛और ‚P‛ को पररभाव त वकया गया है।
(4) (क) एक इकोनॉमाइजर सुरिा िाल्व से वनियहन पाइप का िेि कम से कम िाल्व सीवटोंग िेि से
दोगुना होना चावहए।
(ख) जहाों कई इकोनॉमाइजर सुरिा राहत िाल्व से वनियहन मुख्य वनियहन पाइप से जुड़ा हुआ है, मुख्य
वनियहन पाइप का व्यास तापमान और दबाि की विशे पररक्तस्थवतयो,ों जैसा भी मामला हो, के तहत
िाष्प बनने से दबाि के सोंचय को रोकने के वलए वडजाइन वकया जाएगा।
202. वनकासी - (1) प्रत्येक लगे हुए सुरिा िॉल्व चेस्ट के वलए, वनकासी की एक प्रणाली का प्रािधान
होना चावहए।
(2) वनकास पाइप को ऐसे स्थान पर लगाना चावहए जहाों से लगातार बॉयलर का अपवशष्ट स नीचे की तरफ
वनकलता रहे और उसे स्पष्ट स रूप से वदखाई देना चावहए और इससे वकसी व्यक्ति को िवत न पहुाँचे।
203. घूमने िाले पुजे - (1) िॉल्वो ों और क्तस्पोंडलो ों को कु शलतापूियक घुमाना चावहए और प्रत्येक मामले
में कु छ ऐसा प्रािधान वकया जाना चावहए वजससे वक उनके गाइडटस उनसे अलग न होने पाए।194 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) सभी सेिा शतों के तहत काययशील पुजो को सुचारू रूप से घूमने के वलए पयायप्त स्थान होना
चावहए। क्तस्पोंडल को स्टवफों ग बॉक्स के साथ नही ोंलगाया जाना चावहए।
204. लीिसष हेतु वबयररंग – (1) लीिर िॉल्व के लीिरो ों के वबयररोंग को इस प्रकार से वडजाइन वकया
जाना चावहए तावक सभी सेिा शतों के तहत िॉल्व सुचारू तरीके से कायय कर सके ।
(2) ऐसे मामलो ों में जहाों लीिर वबयररोंग्स वपन के ऊपर लगे होते है, वलिर में लगे वछद्र नॉन-कोरोवडबल
धातु से बने हुए होने चावहए अथिा वपन नॉन-कोरोवडबल धातु से बने हुए होने चावहए।
205. भार और ल्परंग्स को लगाना - (1) लीिर और भार सुरिा िॉल्व में भार को एक तरफ लगाया
जाना चावहए और इसे लीिर से इस प्रकार से जुड़ा हुआ होना चावहए तावक सुरिा िॉल्व पर अत्यवधक
बोझ न पड़े।
(2) (क) क्तरोंग लोडेड सुरिा िॉल्वो ों के मामले में, िाशसय अथिा फे रूि को अडजक्तस्टोंग स्क्रू के नीचे
लगाया जाना चावहए तावक िॉल्व पर िाष्प आने से उस पर अत्यवधक बोझ न पड़े। सुरिा िॉल्व को
एडजस् ट करने के पश्चातट क्तरोंग्स पर पड़ने िाले दबाि को सेट वकया गया है अथिा एडजक्तस्टोंग स्क्रू पर
लोक नट का इस्तेमाल करते हुए पेडलोक अथिा अन्य उपयुि उपकरण के माध्यम से सुरवित वकया
जाना चावहए।
(ख) जहाों क्तरोंग्स में तनाि होता है, िहाों उससे वलोंक अथिा उवचत स्टॉप लगाया जाना चावहए तावक
क्तरोंग्स को D/4 के िॉल्व वलफ्ट सोंबोंधी सीमा से अवधक दूर तक न खीचों ा जा सके ।
जहाों D = िॉल्व सीवोंटग का व्यास
206. ईवजंग वगयर - सुरिा िॉल्वो ों को इस प्रकार से लगाया जाना चावहए तावक इसकी सीट पर पड़ने
िाले दबाि को आसानी से कम वकया जा सके और इवजोंग लीिर आसानी से िॉल्व को उठा सके ।
207. वलफ्ट - सुरिा िॉल्व एक वनवश्चत दूरी से उठाए जाने योग्य होगों े जो विवनयम 196 में िवणयत
वडस्चाजय ऐज िाले न्यूनतम समग्र िेि ‚ ‛ से कम नही ोंहोगा।
208. हाई और लो िाटर अलामष - हाई और लो िाटर अलामय को इस प्रकार से लगाया जाएगा वक गेज
में जल स्तर वदखने पर अलामय से ध्ववन आए।
209. अंवतम सेवटंग – वनमायता के कारखाने से वनकालने से पूिय प्रत्येक सुरिा िॉल्व को वनधायररत दबाि
पर ब्लो-ऑफ करने के वलए व्यिक्तस्थत वकया जाएगा।
210. सुरिा िॉल्व सेट प्रेसर वनधाषररत करना- सुरिा िॉल्व के वलए दबाि वनधायररत करने के वलए
िायु अथिा अन्य गैस का उपयोग वकया जा सकता है, बशते वक परीिण के वलए माध्यम सुरिा िॉल्व
को विवनयम 191 के उप-विवनयम (1) की आिश्यकता के अनुरूप पूिय में वकए गये हाइडरॉवलक परीिण
के अध्यधीन होना चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 195
211. सुरिा िॉल्व के वनधाषररत दबाि में बदलाि करना - सुरिा िॉल्व में लगे क्तरोंग को 5% से
अवधक या जहाों िॉल्व पर वचन्ह लगाया जाता है उससे कम दबाि पर ररसेट नही ों वकया जाएगा, और
वनधायररत दबाि को पोंजीकृ त प्रावधकारी की सोंतुवष्ट स के आधार पर बदला जा सकता है।
212. सामवग्रयां - (1) (क) क्तरोंग्स को एवसड ओपन हथय अथिा इलेक्तररक प्रवहृया द्वारा बने स्टील से
बनाया जाना चावहए और इसका रासायवनक सोंगठन वनम्नवलक्तखत सीमाओ ों के भीतर होना चावहए:
तावलका5/3: काबषन टील
हृम सोंख्या तत्व न्यूनतम (प्रवतशत) अवधकतम (प्रवतशत)
(1) (2) (3) (4)
1. काबयन 0.90 1.20
2. वसवलकॉन 0.30
3. मैंगनीज 0.45 0.80
4. सल्फर 0.050
5. फास्फोरस 0.050
तावलका 5/4: वसवलकॉन मैंगनीज टील
हृम सोंख्या तत्व न्यूनतम (प्रवतशत) अवधकतम (प्रवतशत)
(1) (2) (3) (4)
1. काबयन 0.5 0.65
2. वसवलकॉन 1.50 2.00
3. मैंगनीज 0.70 1.00
4. सल्फर 0.050
5. फास्फोरस 0.050
तावलका 5/5: अलॉय टील
हृम सोंख्या तत्व ग्रेड I ग्रेड II ग्रेड III ग्रेड VI
(1) (2) (3) (4) (5) (6)
1 काबयन % 0.55 से 0.65 0.46 t से 0.54 0.55 से 0.65 0.55 से 0.65
2 मैंगनीज % 0.70 से 1.00 0.70 से 0.90 0.70 से 1.00 0.70 से 1.00
3 वसवलकॉन % 0.10 से 0.35 0.10 से 0.35 0.10 से 0.35 1.70 से 2.10
4 हृोवमयम % 0.60 से 0.90 0.80 से 1.10 0.40 से 0.60 0.20 से 0.40
5 मोवलब्लेडनम -- -- 0.15 से 0.25 0.20 से 0.30
%196 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
6 बेनेवडयम % -- 0.15 न्यूनतम. -- --
7 वनकल % -- -- 0.40 to 0.70 --
8 फास्फोरस % -- -- -- --
9 सल्फर % -- -- -- --
तावलका 5/6: टंगटन अलॉय टील
हृम H12 H21
तत्व
संख्या
न्यून. अवधक. न्यून. अवधक.
(1) (2) (3) (4) (5) (6)
1 काबयन % 0.30 0.40 0.26 0.36
2 मैंगनीज % 0.20 0.60 0.15 0.40
3 फास्फोरस का अवधकतम % - 0.03 - 0.03
4 सल्फर का अवधकतम % - 0.03 - 0.03
5 वसवलकॉन % 0.80 1.25 0.15 0.50
6 हृोवमयम % 4.75 5.50 3.00 3.75
7 बेनेवडयम % 0.20 0.50 0.30 0.60
8 टोंगस्टन % 1.00 1.70 8.50 10.00
9 मोवलब्लेडनम % 1.25 1.75 - -
(ख) विवनमायता, वनरीिक प्रावधकारी द्वारा अपेवित होने पर प्रत्येक कास्ट का विश्ले ण प्रस्तुत
करेगा। यवद वीकतोंि विश्ले ण की आिश्यकता होगी, तो इसका वनधायरण एक प्रवतशत की दर से वकया
जाना चावहए।
(ग) सभी क्तरोंग्स को गमय करके तैयार करना चावहए और उसे उवचत तरीके से सख्त और नरम भी
करना चावहए।
(घ) 16 एमएम बार के व्यास से अवधक व्यास िाले क्तरोंग्स को गमय करके तैयार करना चावहए और
16 एमएम बार के व्यास से कम व्यास िाले क्तरोंग्स को गमय या ठण्डा करके तैयार करना चावहए। उवचत
तरीके से क्तरोंग्स को सख्त और नरम करना चावहए।
(2) टॉरसन बासय को ऐसे स्टील से तैयार करना चावहए वजसका यील्ड प्ाोंइट 141 के जी/एमएम2 से
कम होता है।
नोट: अलग-अलग विवनमायताओ ों द्वारा विकवसत विवशष्ट स स्टील को बॉयलर, मुख्य वनरीिक अपने
वििेकावधकार पर वीकीकृ वत दे सकता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 197
213. आकार - (1) सामान्य वलफ्ट िॉल्वो ों के वलए सुरिा िॉल्व क्तरोंग्स को दबाने अथिा उसे बााने के
वलए वनधायररत दबाि के साथ िॉल्व को लोड वकया जाना चावहए, ऐसा दबाि िॉल्व के व् यास के एक-
चौथाई दबाि से कम नही ों होना चावहए, क्तरोंग्स लोडेड स्तर के सुरिा िॉल्व के मामले में लीिरेज के
अनुपात पर विचार वकया जा सकता है।
(2) क्तरोंग का बाह्य व्यास अनलोडेड लोंबाई के 4:1 के समानुपात से अवधक नही ोंहोना चावहए।
(3) ये आिश्यकताएों फु ल वलफ्ट और हाई वलफ्ट िॉल्वो ोंपर लागू नही ोंहोती है।
214. अवधकतम अनुमत कायषशील दबाि का वनधाषरण - (1) क्तरोंग्स को खीचों ने के वलए गोलाकार
िगायकार अथिा आयातकार खोंड हेतु वीकीकृ त अवधकतम अनुमत काययशील दबाि, का वनधायरण
वनम्नवलक्तखत सूि से वकया जाना चावहए
(क) गोलाकार खोंड
10,000 πd3
P = समीकरण (5/9)
DACK
(ख) िगायकार खोंड
33,333d3
P = समीकरण (5/10)
DACK
(ग)आयताकार खोंड
160,000 B2 H2
P = समीकरण (5/11)
DACK (3B + 1.8H)
नोट - कों प्रेशन में लगे क्तरोंग्स के वलए- उपयुयि समीकरण से अनुमावनत अवधकतम अनुमत काययशील
दबाि को 25 प्रवतशत तक बााया जा सकता है।
जहाों ( सभी आयाम इोंच में)
4 (D – 1)/d 0.615
K = + समीकरण (5/12)
D D
(आयताकार खोंड के मामले में डी, को बी से प्रवतस्थावपत वकया जाए)
P = पाउण् ड िगय इोंज (वनधायररत दबाि) में अवधकतम अनुमत काययशील दबाि
A = िॉल्व का लोवडोंग एररया
D = िगायकार स्टील के गोल अथिा वकनारे िाले वहस्से का व्यास
B = तार की चौड़ाई (क्तरोंग एक्तक्सस के वलए रेवडयल)198 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
H = तार की डेप्थ (क्तरोंग एक्तक्सस के समानाोंतर)
D = कॉयल का माध्य व्यास
L + L
1 2
C = क्तस्थर = --------- समीकरण (5/13)
L
1
L = अपेवित लोवडोंग के वलए क्तरोंग के आरोंवभक कों प्रेशन अथिा क्तरोंग को खीचों ना (PxA)
1
L = विवनयम 193 से 195 और 207 में उक्तिक्तखत व्याख्या के अनुसार वलफ्ट वकए जाने के वलए क्तरोंग
2
पर कों प्रेशन देना अथिा क्तरोंग को आगे खीचों ना ।
उदाहरण :
C = 2 जहाों क्तरोंग का कों प्रेशन या क्तरोंग को खीचों ने के वलए अपेवित लोवडोंग हेतु िॉल्व के व्यास का ¼
है।
C= 1.5 जहाों क्तरोंग का कों प्रेशन या क्तरोंग को खीचों ने के वलए अपेवित लोवडोंग हेतु िॉल्व के व्यास का ½
है।
C = 1.25 जहाों क्तरोंग का कों प्रेशन या क्तरोंग को खीचों ने के वलए अपेवित लोवडोंग हेतु िॉल्व के व्यास के
बराबर है।
नोट: (1) उपयुयि सूि क्तरोंग्स को खीचों ने के तहत क्तरोंग्स के खोंड पर 5,624 Kg cm2(g) के
अवधकतम अनुमत सुरवित दबाि और 7,030 kg/cm2 आधाररत है जहााँ ये कों प्रेशन के अोंतगयत आते हैं।
(2) उपयुयि िैल्ू का ‚ ‛ के िल ‚फु ल वलफ्ट‛ सुरिा िॉल्वो ोंके मामले में, जहाों L बराबर है D/4 जहाों
2
‚हाई वलफ्ट‛ और ‚ऑवडयनरी वलफ्ट‛ सुरिा िॉल्वो ों का मामले है, ‚सी‛ का सोंबोंवधत मान L के उवचत
2
मान का उपयोग करके वनकाला जा सकता है।
(2) टॉसयन बासय के मामले में अवधकतम शीयर दबाि को वनम्नवलक्तखत सूि से वनकाला जा सकता है, जो
55 kg/वममी2 से अवधक नही ोंहो
TDC
f = ------- समीकरण (5/14)
s
2J
जहाों,
f = शीयर दबाि
s
T = वनधायररत दबाि पर टाकय
D = बार का बाहरी व्यास
J = बार के भाग के इनवशयया का पालेर मूमेंट और
िॉल्व को पूणयत: घूमाने के वलए कोण
C = ------------------------------
वनधायररत दबाि पर घुमाने के वलए कोण
(जैसावक विवनमायता द्वारा प्रस्तुत वकया गया)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 199
टॉकय को बााने िाले लीि के आयाम उपयोग होने िाली सामग्री के बराबर समानुपात में होने चावहए।
215. जांच - (1) क्तरोंग का परमानेंट सेट (सामान्य तापमान पर पहले से सेट करने के पश्चातट, फ्री हाईट
और अवतररि तीन बार क्तरोंग को खीचों ने के 10 वमनट पश्चातट मापी गई लोंबाई के बीच का अोंतर जैसा
वक उक्तिक्तखत है) फ्री हाइट के 0.5% से अवधक नही ोंहोनी चावहए।
(2) टॉसयन बासय को काययशील कोण के 50% से भी अवधक कोण पर घुमाने के पश्चातट स्थायी रूप से टेाा
नही ोंहोना चावहए।
216. एक्स्टेंसन ल्परंग्स - एक्स्टेंसन क्तरोंग्स गोल आकार िाले तार से बने होगों े ।
217. उपयोगी कॉयलो ंका संख्या - क्तरोंग के कों प्रेशन अथिा क्तखोंचाि िाले क्तरोंग में प्रभािी अथिा खुले
कॉयलो ोंकी सोंख्या का वनधायरण वनम्नवलक्तखत सूि से वकया जाना चावहए:
(i) गोलाकार अथिा िगायकार तार हेतु
KCd4
N = समीकरण (5/15)
SD3
(ii) आयताकार तार हेतु
66B3H3K
N = समीकरण (5/16)
(B2 + H2) SD2
जहााँ,
N = प्रभािी कॉयलो ोंकी सोंख्या
K = वनधायररत दबाि पर इोंचो ोंमें कों प्रेशन अथिा टेंशन
C = गोलाकार हेतु 22, िगायकार स्टील हेतु 30
D = इोंच के 16 िें भाग में िगायकार स्टील का व्यास अथिा वकनारा
S = ब्लो ऑफ दबाि पर पाउोंड में क्तरोंग पर पड़ने िाला लोड
D = इोंच में िॉयल का औसत व्यास
B = इोंच के 16 िें भाग में तार की चौड़ाई
H = इोंच के 16 िें भाग में तार का मध्य वहस्सा
218. कॉयलो ंके बीच दूरी - कॉयलो ों के बीच दूरी जब िॉल्वो ों को इसके व्यास के ¼ से ऊपर उठाया
जाता है, तब इसे पूणयत: उठाने के वलए 1.6 एमएम और सामान्य तौर पर तथा इसे पूरी तरीके से ऊपर
उठाने के वलए 0.8 एमएम से कम नही ोंहोना चावहए।
219. वकनारो ं की वफवनवशंग - कों प्रेशन क्तरोंग का नीचे िाला भाग समतल और बराबर होना चावहए
और क्तरोंग की एक्तक्सस िाले समकोण की पूणय पररवध में होना चावहए तावक िैवतज समतल िेि के
वकनारे पर लगाए जाने पर क्तरोंग्स लम्बित रूप से खड़े रहें।200 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
भाग –V
220. लीिर िॉल्व -जहाों िॉल्व लीिर से प्रचावलत होते हैं, चाहे उन्हें हाथ अथिा मेके वनकली वनयोंवित
वकया जाता है, िहााँ लीिर लोंबा होना चावहए और इसे इस प्रकार से वडजाइन वकया जाना चावहए तावक
िॉल्व सेिा शतों के तहत समुवचत ढोंग से कायय कर सके ।
221. टीम टॉप िॉल्व :- (1) (क) बॉयलर अथिा सुपर हीटर को स् टीम वडवलिरी पाइप से जोड़ने
िाले स्टॉप िॉल्व को फाइनल सुपर हीटर हेडर के आउटलेट के समीप लगे होना चावहए क्योवोंक यह
सुविधाजनक और व्यिहायय होगा अथिा सुपर हीटयस रवहत बॉयलरो ों के मामले में डरम के समीप
व् यािहाररक रूप से यथा होना चावहए।
(ख) जहााँ दो या दो से अवधक बॉयलर िाष्प ररसीिर अथिा वकसी अन्य िेसेि से जुड़े होते, िहााँ िाष्प
को रोकने िाले िॉल्व को बॉयलर और ऐसे ररसीिर अथिा िेसेि के बीच लगाया जाना चावहए।
2 (क) स्टीम स्टॉप िॉल्वो ोंको बॉयलर शैल अथिा उपयुि पैडटस अथिा स्टैंड ब्लॉको ोंसे सीधे जुड़ा होना
चावहए तथा नली तथा िॉल्व चेस्ट को छोटा और मजबूत ढाोंचे से तैयार वकया जाना चावहए।
(ख) स्टीम स्टॉप िॉल्व को स्टैंड पाइप, कनेक्तरोंग कनेक्तरोंग पाइप या सुपर-हीटर हेडर से भी जोड़ा जा
सकता है।
(ग) ऐसे अटेचेमेंट को बोल्ट् फ्लैंवजज या बट-िेल्डेड जोड़ो ों द्वारा बनाया जा सकता है। जहाों आिश्यक
हो इस तरह के बट-िेल्डेड जोड़ो ोंको उपयुि रूप से तनाि मुि वकया जाएगा:
बशते वक एक बड़े बॉयलर के मामले में जहााँ वनकासी के वलए ऐसा वकए जाने का प्रस्ताि है, या
िाष्प-पाइप को िाष्प रोकने िाले िाल्व से इस विवनयम के तहत वनधायररत स् तर से अवधक ऊों चाई पर
जोड़ने के कारण बाधा आती है,िहाों स्टॉप िाल्व और बॉयलर के बीच 5 िाले व्यास तक के एक
लोंबित स्टैंड पाइप को लगाने की अनुमवत होगी। इस तरह के स्टैंड पाइप मजबूत होने चावहए और
रॉट आयरन, माइल्ड स्टील या कास्ट स्टील से बने होने चावहए। रॉट या माइल्ड स्टील पाइप के
फ्लैंवजज को पाइप पर िेल्ड वकया जाना चावहए, और वकसी अन्य कनेक्शन के वलए स्टैंड पाइप पर
कोई िाोंच नही ोंहोनी चावहए:
बशते यह भी वक बड़े बायलर के मामले में वजसमें स् टॉप िाल्व और बायलर के बीच एक
िाोंच कनेक्शन जोड़ने के वलए एक टी पीस वफट करना िाोंवछत है, टी पीस लगाया जा सकता है, टी
पीस रॉट आयरन, माइल्ड स्टील या कास्ट स्टील से मजबूत तरीके से बना होना चावहए और उसकी
ऊों चाई में 2½ के व्यास से अवधक नही ोंहोना चावहए तथा प्रत्येक टी पीस िाोंच में सीधे एक स्टॉप िाल्व
लगाया जाना चावहए।
(3) जब दो या दो से अवधक बॉयलर एक सामान्य स्टीम मेन से जुड़े होते हैं और िहाों कोई सोंयुि
स्टॉप नही ों लगा होता है और उनमें आइसोलेवटोंग िाल्व लगे होते हैं तो एक वीकचावलत आइसोलेवटोंग[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 201
िाल्व को अवनिायय रूप से लगाया जाना चावहए । िेल्डेड पाइपो ों के साथ जुड़े बॉयलरो ों के मामले में,
एक वीकतोंि वीकचावलत आइसोलेवटोंग िाल्ि अवनिायय रूप से लगाया जाना चावहए ।
भाग –VI
222. ब्लो-डाउन कॉक या िाल्व और पाइप – (1) ब्लो-डाउन कॉक या िॉल्व का आकार बड़ा
होना चावहए।
(2) कॉक या िॉल्व से जुड़े िेस् ट पाइप को आचय या विक िकय से घेर कर नही ोंरखना चावहए और इसे
ऐसे वबोंदु पर वडस्चाजय वकया जाना चावहए जहाों वकसी भी व्यक्ति के आहत होने का खतरा न हो।
(3) इन पाइपो ोंको दूसरे बॉयलर के वकसी साझा पाइप से नही ोंजोड़ा जाना चावहए।
(4) हालााँवक, वनरोंतर होने िाले ब्लो-डाउन को एक सामान्य हेडर से जोड़ा जा सकता है, जो पयायप्त
तरीके से िेंटेड टैंक या सम्प से अलग होकर वडस्चाजय करता है।
(5) हेडर बड़े हृॉस-सेक्शन िाले आकार के होने चावहए और उस ब्लो-ऑफ टैंक में िाल्व से मु् त तथा
पयायप् त बड़े आकार के िेंट पाइप लगे होने चावहए जो दबाि के सोंचय को रोक सके । हालाोंवक, टैंक
फ्लैश स्टीम एकि करने के वलए लगाए गए हैं, इसवलए पयायप्त िमता िाला एक सुरिा िाल्व लगाया
जाना चावहए ।
(6) टैंक को ऐसी जगह पर होना चावहए वक सभी भागो ोंका वनरीिण सुगमता से वकया जा सके ।
223. ब्लो-डाउन माउंवटंग – (1) प्रत्येक बायलर में उपयुि ब्लो-डाउन िॉल्व या कॉक लगा होना
चावहए, या वजतना सोंभि हो जो बायलर के सबसे वनचले वबोंदु पर लगाया जाना चावहए।
(2) (क) लोकोमोवटि, िटीकल और मरीन प्रकार के बॉयलरो ों के वलए, िाल्व या कॉक सीधे बॉयलर या
उपयुि पैड या स्टैंड पाइप से जुड़ा होना चावहए।
(ख) िाटर ट्यूब बॉयलरो ोंके वलए िॉल्व या कॉक विक िकय के बाहर लगा होना चावहए और इसके और
मड बॉक्स के बीच एक बड़े आकार का स्टील पाइप लगा होना चावहए।
(3) कोवनयश और लोंकाशायर बॉयलर के वलए कॉक या िॉल्व को कास्ट स्टील एल्बो पाइप से जोड़ा
जा सकता है, जो बड़े आकार िाले खोंड के उपयुि स्टैंड पाइप या बॉयलर हेतु िेल्डेड पैड से जुड़ा
होता है। लेवकन कास्ट आयरन एल्बो पाइप को लगाने की अनुमवत नही ोंदी जाएगी।
224. ब्लो-डाउन िाल्व अथिा कॉक - (1) प्रत्येक िाल्व या कॉक में एक उपकरण लगा होना चावहए
जो स्पष्ट स रूप से इसके खुले और बोंद होने की क्तस्थवत को इोंवगत करे और िाल्व या कॉक के सोंचालन के
वलए कोई भी की या समान उपकरण ऐसा होना चावहए वजसे तब तक हटाया नही ोंजा सकता जब तक
वक िाल्व या कॉक पूरी तरह से बोंद न हो जाए।
(2) लॉवकों ग फीदर को िेक्तल्डोंग द्वारा सुरवित वकया जाना चावहए ।
(3) टेपर प्लग के साथ लगे कॉक अलग पैवकों ग ग्लैंडटस के साथ बोल्ट्ेड किर प्रकार के होने चावहए।
भाग VII
225. िाटर गेज – (1) प्रत्येक बॉयलर में पानी के स्तर को इोंवगत करने के वलए दो साधन होने चावहए
वजनमें से एक पारोंपररक गेज ग्लास होना चावहए:202 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
बशते वक 91 सेमी व्यास से नीचे के बॉयलर डरम के मामले में जहाों दो पानी के गेज लगाने में
कवठनाई आती है, दो टेस्ट कॉक और एक ग्लास िाटर गेज लगाया जाना चावहए।
(2) (क) िाटर गेज के ग्लास का सबसे कम विवजबल भाग और वनचले टेस्ट कॉक को सुरवित कायय
स्तर पर लगाया जाना चावहए।
(ख) लोकोमोवटि प्रकार और िटीकल बॉयलर के वलए यह फायरबॉक्स रूफ प्लेट के उच्चतम भाग से
50 एमएम से कम नही ों होना चावहए। गेज ग्लास के दृश्य भाग की न्यूनतम लोंबाई 200 एमएम होनी
चावहए।
(ग) वनरीिण प्रावधकारी द्वारा बॉयलर की िमता के आधार पर लोंबाई बााई जा सकती है।
(3) (क) ग्लास िाटर गेज को इस प्रकार से लगाया जाना चावहए वजससे की बायलर अटेंडेंट द्वारा इसे
आसानी से देखा जा सके और इस तक आसानी से पहुाँचा जा सके ।
(ख) ग्लास िाटर गेज और टेस्ट कॉक के वनकासी िेि बड़े होने चावहए वजससे वक इसके माध्यम से
सफाई करने में सुविधा हो।
(ग) गेज कॉक को खोलने पर उनके हैंडल को िटीकल वदशा में होना चावहए और प्लग के साथ इसके
जोंक्शन पर प्रत्येक हैंडल को प्लग के माध्यम से मागय की वदशा को इोंवगत करने के वलए एक गहरी रेखा
के साथ स्पष्ट स रूप से वचव्त वकया जाना चावहए।
(घ) जब अलग वकए जा सकने िाले हैंडल लगाये जाते हैं, तब हैंडल को गलत तरीके से लगाए जाने से
बचने के वलए उवचत व्यिस्था की जानी चावहए ।
226. डरेन -एक उपयुि वनकास पाइप िाली एक डरेन कॉक या िाल्व प्रत्येक िाटर गेज के साथ
लगाया जाना चावहए।
227. संरिक – (1)जहाों ट्यूबलर ग्लास िॉटर गेज लगाये जाते हैं, िहाों पयायप्त सोंरिक लगाये जाने
चावहए।
(2) क्तस्प्लोंटररोंग को रोकने के वलए ग्लास को उवचत तरीके से लगाया जाना चावहए।
228. ग्लास का आकार -ट्यूबलर िॉटर गेज ग्लास 13 एमएम से कम नही ोंहोना चावहए और इसका
बाहरी व्यास 19 एमएम से अवधक नही ोंहोना चावहए।
229. सुरिा उपकरण - िाटर गेज ग्लास माउोंवटोंग को बॉटम आम्सय में सेल्फ क्लोवजोंग उपकरण के
साथ लगाया जाना चावहए और यह वसफाररश की जाती है वक इसी तरह के उपकरण को टॉप आमय में
लगाया जा सकता है।
230. गेज कॉलम -जहाों गेज एक कॉलम से जुड़े होते हैं, िहाों कॉलम के ऊपर और नीचे की आम्सय को
जोड़ने का कोई मागय नही ोंहोना चावहए, जब तक वक कॉलम और बॉयलर के बीच िाल्व या कॉक को न
लगाया जाए।
231. आइसोलेवटंग कॉक - जहाों बॉयलर से िॉटर गेज पाइप को जोड़ने िाले आइसोलेवटोंग कॉक या
िॉल्व लगाये जाते हैं, िहाों उन्हें 25 एमएम बोर से कम नही ोंहोना चावहए और उन्हें अलग पैवकों ग ग्लैंड
के साथ बोल्ट्ेड किर िाला होना चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 203
भाग – VIII
232. दबाि गेज डायल – (1) 35 के जी/सीएम2(जी) तक दबाि के वलए और जहााँ तक सोंभि हो
दबाि गेज डायल को के जी/सीएम2 (जी) में धीरे-धीरे दबाि को शून्य से दुगना करना चावहए।
(2) 35 के जी/सीएम2(जी) से अवधक दबाि के वलए जहााँ तक सोंभि हो सके अवधकतम अनुमत
काययशील दबाि को धीरे-धीरे बााने की रेंज शून्य से डेा गुना की जानी चावहए, लेवकन वकसी भी
मामले में गेज पर अवधकतम बात 70 के जी/ सीएम2(जी) से कम नही ोंहोनी चावहए।
(3) डायल पर स्के ल स्पष्ट स रूप से और स्थायी रूप से के जी/सीएम2(जी) में अोंवकत होना चावहए।
(4) प्रत्येक दबाि गेज के डायल पर अवधकतम अनुमत काययशील दबाि लाल रोंग में वचव्त वकया
जाएगा।
(5) (क) जहाों गेज और बॉयलर कनेक्शन के बीच पानी के शी य के वलए गेज को कों पनसेट वकया
जाता है, ऐसे कों पनसेशन की मािा को डायल पर वचव्त वकया जाना चावहये। दबाि गेज में + 1
प्रवतशत की सटीकता होनी चावहए।
(ख) बॉयलर दबाि गेज 150 एमएम से कम के व्यास का नही ोंहोना चावहए।
(6) डायल गेज के पॉइोंटर का टरेिल 325° से अवधक नही ोंहोनी चावहए।
233. कनेक्शन - सभी दबाि गेजो ों को एक साइफन पाइप और एक कॉक या िाल्व के साथ, या
उसके आस-पास, इस तरह से लगाया जाना चावहए वक गेज बोंद हो जाए और बॉयलर के स् टीम में रहते
हुए हटाया जा सके ।
234. गेज कॉक - गेज कॉक के हैंडल उन पाइपो ों के समानाोंतर होगों े वजनमें िे कॉक के खुलने िाले
जगह पर लगे होते है और खुले होने का सोंके त देने के वलए कॉक के शेंक पर कट का वनशान लगाया
जाना चावहए।
235. टेट कनेक्शन- सिम व्यल्पि द्वारा प्रेशर गेज को लगाना – (1) प्रत्येक बायलर में सिम
व्यक्ति के दबाि गेज को जोड़ने िाले स्क्रू को िटीकल तरीके से लगाते हुए एक िाल्व या कॉक लगाना
चावहए।
(2) ररसीविोंग सॉके ट को M/20 x 1.5 मेवटरक थ्रेडटस के साथ टैप वकया चावहए और इसे आसानी से
हटाये जाने योग्य कै प लगाया जाना चावहए।
भाग IX
236. फ्यूवज़बल प्लग- (1) फ्यूवसबल प्लग पयायप् त ऊों चाई का होना चावहए और उन्हें इस प्रकार से
लगाया जाना चावहए जो पानी की कमी की क्तस्थवत में फनेस की हीट से सीधे होने िाले नुकसान हो
सकने की क्तस्थवत में बॉयलर के सभी वहस्सो ोंको जल्दी सुरिा प्रदान कर सके ।
नोट: उदाहरणाथय- लोंकाशायर बॉयलरो ोंमें फ्यूवसबल प्लग विक िकय फायर विज के सामने 305 एमएम
से 457 एमएम तक फनेस हृाउन में लगा होगा।204 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) (क) िेट बैक ररिवसिंग चेंबर िाले बॉयलरो ों पर, कम से कम दो फ्यूवजबल प्लग लगाए जाने चावहए;
एक ररिवसिंग चेंबर के हृाउन पर और दूसरा ट्यूब प्लेटटस के ऊपर। वजन बॉयलरो ों में िेट बैक ररिवसिंग
चेंबर नही ोंहोते है, उनमें फ्रों ट एोंड ट्यूब प्लेट पर कम से कम एक फ्यूवजबल प्लग लगाया जाना चावहए।
(ख) प्लग को इस तरह से लगाया जाना चावहए वक प्लग के फ्यूजन की क्तस्थवत में, बॉयलर के अोंदर के
दबाि से पेिेटटस बाहर आ जायेंगे।
237. प्रकार – (1) फ्यूवजबल प्लग में एक सेंटरल कॉवनकल पैसेज िाला एक आउटर बॉडी शावमल
होना चावहए।
(2) सबसे छोटा भाग 7 के जी/सीएम2(जी) तक के दबाि के वलए उपयुि प्लग हेतु 13 एमएम से
अवधक नही ों होना चावहए और 7 के जी/सीएम2(जी) से अवधक दबाि के वलए प्लग हेतु 10 एमएम से
अवधक नही ोंहोना चावहए।
(3) पैसेज को फ्यूवसबल अलाय की एनुअल लाइवनोंग द्वारा सुरवित प्लग द्वारा बोंद वकया जाना चावहए
तावक यवद लाइवनोंग वपघल जाए तो प्लग डराप हो जाए।
(4) फ्यूवसबल धातु से वनवमयत भाग को आधार से अवनिायय रूप से अलग वकया जाएगा तावक बॉयलर से
पूरी वफवटोंग को हटाए वबना इसे आसानी से हटाया जा सके ।
238. सामग्री – (1) अलौह सामग्री में उपयोग वकये जाने िाले बायलर िाटर को रोकने िाले भाग को
छोड़कर प्लग के नॉन- फ्यूवसबल भाग िाोंज के होने चावहए।
(2) फ्यूवसबल धातु बॉयलर के वडजाइन दबाि पर सोंतृप्त िाष्प तापमान कम से कम 66 वडग्री
सेक्तियस के तापमान पर आसानी से वपघलने िाले एलाय का होगा।
239. बॉयलर से अटैचमेंट – (1) जहाों कही ों भी व्यिहायय हो, फ्यूवजबल प्लग को पानी की तरफ से
बॉयलर प्लेट में स्क्रू वकया जाना चावहए।
(2) स्क्रू िाले वहस्से में क्तव्हटिथय फॉमय के थ्रेड प्रवत 25 एमएम पर 11 से अवधक नही ोंहोने चावहए।
भाग X
240. फीड िाल्व- (1) फीड चेक िाल्व नॉन-ररटनय प्रकार के होने चावहए ।
(2) जहाों िाल्व स्क्रू -डाउन नॉन-ररटनय प्रकार का नही ोंहै, िहाों एक अलग स्क्रू -डाउन िाल्व लगाया
जाना चावहए।
(3) फीड चेक िाल्व या आोंतररक फीड पाइप (यवद लगाया जाता है) से वडस्चाजय वनम्न जल स्तर से
ऊपर होना चावहए और लोंकाशायर और कोवनयश बॉयलरो ोंके मामले में, फायर विज से कम से
कम 152 सीएम अवधक होना चावहए।
बशते वक फीड वडस्चाजय स्तर की क्तस्थवत के सोंबोंध में पूिोि प्रवतबोंध िाटर ट्यूब बॉयलरो ोंके मामले
में लागू नही ोंहोगा।
241. ऑपरेवटंग ल्पथवत - फीड चेक िॉल्व या रेगुलेवटोंग िॉल्व को इस प्रकार से लगाया जाना चावहये
वक िे बायलर फ्लोर से सोंतो जनक ढोंग से सोंचावलत हो सकें ।
242. कु छ मामलो ं में णीड उपकरण के रूप में आिश्यकताएँ - एक सामान्य फीड रेंज से जुड़े
बॉयलरो ों की बैटरी के मामले में, फीड उपकरण की सोंख्या के सोंबोंध में विवनयम 181 की[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 205
आिश्यकताओ ों को पूरा माना जाना चावहए, बशते वक फीड िाटर की कु ल आपूवतय, जो सभी सवहृय
बॉयलरो ों की सोंयुि अवधकतम वनरोंतर रेवटोंग से कम नही ोंहोनी चावहए, को बनाए रखा जा सके , चाहे
वबजली आपूवतय के स्रोतो ोंमें से कोई एक विफल हो जाए।
अध्याय-6
बॉयलर और सुपरहीटर ट्यूब्स, हेडसष और अन्य पुजे
भाग-I
243. ट्यूबो ंका वनमाषण और सामग्री - अपेिाएों विवनयम 122 के अनुरूप होगों ी।
244. (1) (क) (i) ट्यूबो ों का अवधकतम अनुमत काययशील दबाि वनम्नवलक्तखत सूि द्वारा वनधायररत
वकया जाना चावहए : -
2f(T-C)
P = --------------- समीकरण (6/1)
(D – T + C)
जहााँ
T = ट्यूबो ोंकी न्यूनतम मोटाई, जो वक नोवमनल मोटाई में से अनुमेय नकारात्मक िहनीयता को घटा
कर प्राप्त होता है, वम.मी. में।
C = 0.75 वम.मी., 70 के जी/सीएम2 (जी) तक और 70 के जी/सीएम2 (जी) सवहत काययशील दबाि
हेतु या
C = 0, 70 के जी/सीएम2 (जी) से अवधक काययशील दबाि हेतु
P = के जी/सीएम2 (जी) में बायलर का अवधकतम अनुमत काययशील दबाि
D = वम.मी. में ट्यूब का बाहरी व्यास
f = अवधकतम अनुमेय तनाि मान जैसावक सामग्री के सोंबोंध में उस देश के शा ी कोड में उपलब्ध
है, जो वक के जी/सीएम2 है। मान की अनुपलब्धता के मामले में, अनुमेय दबाि मानो ों के
मूल्ाोंकन के वलए वनम्नवलक्तखत प्रवहृया अपनाई जानी चावहए।
(ii) ट्यूबो ोंकी न्यूनतम अपेवित मोटाई वनम्नवलक्तखत सूि द्वारा वनधायररत की जानी चावहए: -
PXD
t= --------- +C समीकरण (6/2)
2Xf+P
जहााँ
t = ट्यूबो ोंकी न्यूनतम मोटाई, वम.मी. में
C = 0.75 वम.मी. 70 के जी/सीएम2 (जी) तक और 70 के जी/सीएम2 (जी) सवहत काययशील दबाि
हेतु या
C = 0, 70 के जी/सीएम2 (जी) से अवधक काययशील दबाि हेतु
P = के जी/सीएम2 (जी) में बायलर का अवधकतम अनुमत काययशील दबाि
D = वम.मी. में ट्यूब का बाहरी व्यास206 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
f = अवधकतम अनुमेय तनाि मान जैसावक सामग्री के सोंबोंध में उस देश के शा ी कोड में उपलब्ध
है, जो वक के जी/सीएम2 है। मान की अनुपलब्धता के मामले में, अनुमेय दबाि मानो ों के
मूल्ाोंकन के वलए वनम्नवलक्तखत प्रवहृया अपनाई जानी चावहए।
(क) 454oC तापमान पर या उससे कम तापमान हेतु
T E
s t
--- अथिा ----- इनमें से जो भी कम हो
2.7 1.5
(ख) 454oC से अवधक तापमान हेतु
S
r
--- अथिा S इनमें से जो भी कम हो
c
1.6
जहााँ
T = सामान्य तापमान पर सामग्री की न्यूमतम तन्यता िमता
s
E = काययशील धातु के तापमान ‘t’ पर यील्ड प्ाोंइट (0.2 प्रवतशत प्रूफ स्टरेस)
t
S = 100,000 घोंटो ों में रप्चर लाने के वलए औसत दबाि और वकसी भी मामले में काययशील धातु के
r
तापमान में रप्चर लाने के वलए य यूनतम स् टरेस 1.33 गुना से अवधक नही ोंहोगा ।
S = काययशील धातु तापमान पर, 100,000 घोंटो ों में 1 प्रवतशत का इलॉनगेशन (हृीप) लाने के वलए
c
औसत दबाि ।
नोट: S के मान के मामले में जहाों सामग्री के वलए मानक उपलब्ध नही ों है और ऐसी सामवग्रयो ों का
c
उपयोग भारत अथिा विदेशो ों के बॉयलर में वकया जाता है, तब ऐसी सामवग्रयो ों के वलए अनुमत दबाि
िह होगा जो इनमें से कम होगा
E S
t r
---- अथिा -----
1.5 1.6
(ख) काययशील धातु तापमान को वनम्न रूप में वलया जाएगा नामत:-
(i) इोंटीग्रल इकोनोमाइजर ट्यूबो ों के वलए, पानी का अवधकतम तापमान वजसके वलए तत्व के
वहस्से को वडजाइन वकया गया है प्लस 11oC होगा ।
(ii) फनेस और बॉयलर ट्यूबो ों के वलए, सोंतृप्त तापमान, काययशील दबाि प्लस 28oC के अनुरूप
होना चावहए।
(iii) कन्रेंशनल सुपर हीटर ट्यूबो ों के वलए, अवधकतम िाष्प तापमान वजसके वलए तत्व का वहस्सा
वडजाइन वकया गया है प्लस 39oC होगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 207
(iv) रेवडएोंट सुपर हीटर ट्यूबो ोंके वलए वडजाइन अवधकतम िाष्प तापमान प्लस 50oC ।
(2) हालाोंवक, वकसी भी मामले में, वदए गए ट्यूबो ों की मोटाई नीचे दी गई तावलका में दी गई मोटाई से
कम नही ों होनी चावहए (विवनयम 47 के उप-विवनयम (5) और विवनयम 49 के उप-विवनयम (5) में
विवनवदयष्ट स िहनीयता के अध्यधीन):
तावलका 6/1
हृम बाहरी व्यास सीमलेस हॉट सीमलेस कोल्ड डरान
सों. वफवनश्ड अथिा इलेक्तररक
रेवजस्टेंस िेल्डेड
(1) (2) (3) (4)
1 32 वम.मी. तक और 32 वम.मी. सवहत 2.9 वम.मी. 2.03 वम.मी.
2 32 वम.मी. के ऊपर 51 वम.मी. तक और 51 वम.मी. 3.25 वम.मी. 2.34 वम.मी.
सवहत
3 51 वम.मी. के ऊपर 76 वम.मी. तक और 76 वम.मी. 3.35 वम.मी. 2.64 वम.मी.
सवहत
4 76 वम.मी. के ऊपर 89 वम.मी. तक और 89 वम.मी. 3.25 वम.मी. 3.25 वम.मी.
सवहत
5 89 वम.मी. के ऊपर 114 वम.मी. तक और 114 3.66 वम.मी. 3.66 वम.मी.
वम.मी. सवहत
फोस्डय सकुय लेशन टाइप के बॉयलरो ों के वलए कॉयल ट्यूबो ों के मामले में, वदए गए ट्यूबो ों की न्यूनतम
मोटाई वनम्नानुसार होगी :
तावलका 6/2
हृम सोंख्या ट्यूब का बाहरी व्यास वम.मी. म ें न्यूनतम मोटाई
(1) (2) (3)
1 29 वम.मी. तक और 29 वम.मी. सवहत 1.62 वम.मी.
2 29 वम.मी. से अवधक, 35 वम.मी. तक और 35 वम.मी. सवहत 1.83 वम.मी.
3 35 वम.मी. से अवधक, 42 वम.मी. तक और 42 वम.मी. सवहत 2.34 वम.मी.
(3) (क) इकोनोमाइजर, फनेस िॉल, सुपरहीटर और रीहीटसय सवहत बॉयलर के कु छ पुजों के वलए
हॉट या कोल्ड बेंड ट्यूब इस खोंड के अनुरूप होने चावहए और उन्हें वनम्नित तरीके से हीट टरीट वकया
जाना चावहए :
काबयन स्टील/एलाय स्टील हेतु (P-91 और आस्टेवनवटक स्टेनलेस स्टील को छोड़कर)
- यवद प्रवतशत वथवनोंग 25% से अवधक है - पोस्ट बेंड हीट टरीटमेंट (PBHT) आिश्यक है।208 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
- यवद बाहरी व्यास (OD) 141.3 वम.मी. से कम है और R/D<- 1.30 - PBHT आिश्यक है।
- यवद बाहरी व्यास (OD) 141.3 वम.मी. से अवधक है और R/D<- 2.5 - PBHT आिश्यक है।
P-91 और आस्टेवनवटक स्टेनलेस स्टील हेतु- सामग्री विवनदेशो ों में विवनवदयष्ट स आिश्यकताओ ों का पालन
वकया जाना चावहए।
जहााँ, R ट्यूब की कें द्र रेखा का बेंड मीन रेवडयस (वम.मी. में) है और D ट्यूब का बाहरी व्यास (वम.मी.
में) है।
बेंडटस के भीतर बट िेल्ड को अनुमवत नही ोंदी जानी चावहए।
सकुय लररटी सीमा से वथवनोंग और डीपारचर वनम्नवलक्तखत विवधयो ों में से एक द्वारा प्रदवशयत वकया जाना
चावहए।
(क) सोंबद् और सोंतो जनक सेिा अनुभि;
(ख) एक प्रवहृया परीिण;
(ग) प्रत्येक वशफ्ट के पहले बेंड सवहत, बेंडो के 2% की माप द्वारा।
विवध का चयन वनमायता के विकि के आधार पर होना चावहए।
(ख) ट्यूब बेंड पर वथवनोंग वनम्नानुसार होगी :
(i) बेंड एक्सटरैडोस के आसपास वकसी भी स्थान पर, जहाों (ii) द्वारा अनुमत क्तस्थवत को छोड़कर, स्टरेट
ट्यूब की पररकवलत न्यूनतम अनुमेय वडजाइन मोटाई में कमी (प्रवतशत में) वनम् नवलक्तखत, से अवधक
नही ोंहोनी चावहए :
_100_
4R + 2
D
जहााँ
R ट्यूब की कें द्र रेखा के बेंड का मीन रेवडयस है। (वम.मी. में)
D ट्यूब का ऑडयर वकया हुआ बाहरी व्यास (वम.मी. में)
(ii) उन मामलो ों में (i) के तहत आिश्यक न्यूनतम मान से कम बेंड मोटाई की अनुमवत दी जानी
चावहए जहाों वनमायता कम से कम तीन बेंडो ों पर वकए गए बक्तस्टिंग परीिणो ों द्वारा यह प्रदवशयत कर
सकता है वक बेंड की िमता सीधी ट्यूब की िमता से कम नही ोंहै।
(iii) जहाों कोल्ड फॉमयड बेंडो ों पर बेंड एक्सटरैडोस के आसपास वकसी भी स्थान पर वथवनोंग की मािा
स्टरेट क्तस्थवत में ट्यूब की िास्तविक मोटाई के 25% से अवधक हो तो बेंडो ों को उपयुि रूप से हीट
टरीटेड वकया जाना चावहए। उसकी िास्तविक मोटाई बेंड के प्रत्येक छोर पर एक्सटरैडोस की रेखा के
समान है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 209
(ग) बेंड एपेक्स पर सकुय लररटी से वडपाचयर वसोंगल बेंवडोंग ऑपरेशन में वकए गए बेंड के वलए 10% से
अवधक नही ोंहोना चावहए और प्राथवमक, बेंवडोंग ऑपरेशन के बाद हॉट प्रेस न वकए गए बेंड हेतु 15%
से अवधक नही ोंहोना चावहए ।
सकुय लेररटी से वडपाचयर (प्रवतशत में) का आकलन वनम्नवलक्तखत तरीके से वकया जाना चावहए:
D - D
अवधकतम न्यूनतम
100
----------------- x
D
जहााँ
D ट्यूब बेंड एपेक्स (वम.मी.) में मापा गया अवधकतम बाहरी व्यास है,
अवधकतम =
D D (वम.मी.) के रूप में एक ही हृॉस सेक्शन पर मापा गया न्यूनतम बाहरी व्यास है
न्यूनतम = अवधकतम
D ट्यूब का बाहरी व्यास (वम.मी. में) है जैसा आडयर वकया गया था।
भाग - II
245. हेडसष और समान दबाि िाले पुजों का वनमाषण और सामग्री - सामग्री और वनमायण अध्याय-2
और अध्याय-3 के अनुरूप होने चावहए।
246. आयताकार हेडसष फॉमष में वसमेवटरकल – (1) अवधकतम अनुमत काययशील दबाि वनम्न सूि से
प्राप्त मान के छोटे मान से अवधक नही ोंहोना चावहए :
Cf (t – C )2
1
(क) P = ------------------- समीकरण (6/3)
b2
6.25t2.f.E
(ख) P = ------------ समीकरण (6/4)
w2
जहााँ
P = अवधकतम अनुमत काययशील दबाि
t = मोटाई
b = हेडसय से जुड़े वकनारो ोंके बीच की आोंतररक चौड़ाई
c = रॉट स्टील हेतु 3.413 और स्टील काक्तस्टोंग हेतु 2.926
जहाों वकनारो ों को नलीदार बनाकर या अन्यथा अवधक सपोटय द्वारा ररइनफोस्डय वकया जाता है िह भी
ऐसा वक नलीदार या सपोटय के बीच के वहस्से की लोंबाई b से अवधक न हो, वजसे रॉट स्टील हेतु 5.82
और स्टील काक्तस्टोंग हेतु 5.12 के रूप में वलया जाना चावहए,210 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
f = उप-विवनयम (3) के तहत तावलका 6/3 में वदए गए अनुसार काययशील धातु तापमान पर अनुमेय
दबाि
c = 0.08 सें.मी.
1
w = ट्यूब प्लेट और विपरीत वकनारो ोंके बीच हैडर की आोंतररक चौड़ाई
E = वछद्रो ोंके बीच के वलगामेंटटस की दिता
(2) यवद हेडर के फे स को सामान्य रूप से ट्यूब होल या हैंड होल पर मशीनीकृ त वकया जाता है,
तो उस वहस्से की मोटाई उपरोि समीकरण द्वारा वदए गए 4.8 वम.मी. से कम हो सकती है; लेवकन
सूिो ोंके उपयोग से प्राप्त मोटाई को छोड़कर, ट्यूब वछद्र पर हेडर की मोटाई वनक्तम् न वलक्तखत से कम नही ों
होनी चावहए :-
t = √(C x d + C ) समीकरण (6/5)
1
जहाों
t = मोटाई
d = वछद्र का व्यास
C = 0.2235 वम.मी.
C = 6.4 वम.मी.
1
वकसी भी मामले में मोटाई 8 वम.मी. से कम नही ोंहोनी चावहए, वसिाय ऐसे छोटे पैच के जो 322 वम.मी.2
तक हो, को छोड़कर, यह मोटाई, समीकरणो ों (6/3) और (6/4) में प्रयुि मोटाई का 50 प्रवतशत हो
सकती है।
(3) काययशील धातु तापमान पर अनुमेय तनाि नीचे दी गई तावलका के अनुसार होना चावहए: -
तावलका 6/3 : आयताकार सेक्शन हेडसष हेतु कायषशील तापमान पर अनुमेय तनाि
हृम सोंख्या
वडग्री में कास्ट स्टील काबयन और एलाय स्टील
काययशील धातु 44-45
तापमान kg/mm2
C kg/cm2 (g) वनवदयष्ट स तापमान पर प्रत्येक मामले में प्राप् त न्यून
मान वनम्नवलक्तखत आधार पर गणना करके
प्राप्त की गई है :
(1) (2) (3) (4)
1 288 703 454 वडग्री सेक्तियस या उससे कम
तापमान के वलए
2 316 633
T E
S t
3 343 562
----- अथिा ----
4 371 532
2.7 1.5
5 399 505[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 211
6 427 475 454 वडग्री सेक्तियस से अवधक तापमान के
वलए
7 454 443
S
r
8 482 309
--- अथिा S
c
1.6
जहााँ
T = सामान्य तापमान पर सामग्री की न्यूमतम तन्यता िमता
s
E = काययशील धातु के तापमान ‘t’ पर यील्ड प्ाोंइट (0.2 प्रवतशत प्रूफ स्टरेस)
t
S = 100,000 घोंटो ों में रप्चर लाने के वलए तापमान ‘t’ पर औसत दबाि और वकसी भी मामले में
r
100,000 घोंटो ोंमें रप्चर लाने के वलए न्यूमतम तनाि 1.33 गुना से अवधक नही ोंहोगा।
S = 100,000 घोंटो ोंमें 1 प्रवतशत का इलॉनगेशन (हृीप) डालने के वलए तापमान ‘t’ पर औसत तनाि ।
c
(4) काययशील धातु के तापमान को वनम्न प्रकार से वलया जाएगा:
(क) सोंतृप्त िाष्प और िाटर डरम तथा हेडर हेतु सोंतृक्तप्त तापमान बॉयलर के काययशील
दबाि प्लस 28°C के अनुरूप होगा।
(ख) सुपरहीटर हेडसय हेतु, हेडर हेतु िाष्प का अवधकतम तापमान प्लस 28°C होगा।
(5) (क) जहाों हेडर दहन की गैसो ोंसे पयायप्त रूप से सुरवित हैं या बॉयलर के तीसरे या बाद के पास में
ऐसी गैसो ों द्वारा बहा वदए गए हैं, काययशील धातु तापमान को सोंतृप्त या ऊपर पररभाव त अवधकतम
भाप तापमान, जो भी लागू हो, के रूप में वलया जाएगा।
(ख) एक किररोंग या आग रोक या इन्ऱुलेट सामग्री जो हटाए जाने के वलए उत्तरदायी हो सकती है, उसे
पयायप्त सुरिा नही ोंमाना जाएगा।
(6) (क) आयताकार हेडर के वसरो ोंको हेडर के साथ जोड़कर बनाया जा सकता है या िेक्तल्डोंग द्वारा उसे
जोड़ा जा सकता है।
(ख) फ्लैट वसरो ोंके वलए अवधकतम अनुमत काययशील दबाि की गणना वनम्न सूि द्वारा की जानी
चावहए : -
f (t – C)2
P = ---------------- समीकरण (6/6)
d2 K
जहाों,
P =अवधकतम अनुमत काययशील दबाि वक.ग्रा/ से.मी.2(जी) में
f =अवधकतम अनुमत काययशील तनाि जैसावक ऐसे देश के शा ी कोड में उपलब्ध है वजससे वक
सामग्री सोंबोंवधत है के जी/सीएम2(जी) में।212 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
t = सबसे कमजोर वबोंदु पर प् लेट की मोटाई, वम. मी. में
d = आयताकार हेडर की िाि के बीच की य यूनतम चौड़ाई वममी.में
C = 1 वममी,
K = 0.32, हेडर के साथ एोंड इोंटीग्रल सवहत अथिा फ्लैंग् ड और बट िेक्तल्डड के वलए,
= 0.40, अनुमोवदत तरीके से हेडर के साथ सीधे तौर पर स् टरेंथ िेक्तल्डड एोंडटस के वलए ।
247. अवनयवमत रूप में हैडसष– (1) ऐसे मामलो ों में जहाों हेडर ऐसे अवनयवमत आकार के होते हैं वक
मोटाई के वनधायरण के वलए सूि का प्रयोग अव्यािहाररक हो जाता है, वनमायता अवधकतम आोंतररक
हाइडरोवलक दबाि को इोंवगत करके काययशील क्तस्थवत के वलए हेडर की उपयुिता वदखाएगा वक हेडर
उसी वडजाइन और समान सामग्री से बने हैं और स्थायी विरूपण के वबना वटके रहेंगे।
(2) इसी तरह के हेडर के वलए अवधकतम काययशील तनाि को वनम्नवलक्तखत सूिो ों द्वारा वनधायररत वकया
जा सकता है: -
काययशील धातु तापमान पर अनुमेय तनाि
काययशील धातु तापमान पर अनुमेय तनाि
P = P x --------------------------------------------------- समीकरण (6/7)
1
F x C
जहाँ,
P = पाउोंड प्रवत िगय इोंच में अवधकतम अनुमत काययशील दबाि
P = स्थायी डीफामेशन वक वबना अवधकतम आतोंररक हाइडरोवलक दबाि प्रवतरोध
1
F = रॉट स्टील हेतु 1.75 और कास्ट सटील हेतु 2,
C = 24 टन प्रवत िगय इोंच के रॉट स्टील हेतु न्यूनतम अल्ट्ीमेट तन्यता तनाि 15500,
= 26 टन प्रवत िगय इोंच के रॉट स्टील हेतु न्यूनतम अल्ट्ीमेट तन्यता तनाि 16500,
= 28 टन प्रवत िगय इोंच के रॉट स्टील हेतु न्यूनतम अल्ट्ीमेट तन्यता तनाि 18000,
= 32 टन प्रवत िगय इोंच के रॉट स्टील हेतु न्यूनतम अल्ट्ीमेट तन्यता तनाि 21000
= 34 टन प्रवत िगय इोंच के रॉट स्टील हेतु न्यूनतम अल्ट्ीमेट तन्यता तनाि 22000
= 28 टन प्रवत िगय इोंच के कास्ट स्टील हेतु न्यूनतम अल्ट्ीमेट तन्यता तनाि 15500
248. बेलनाकार हेडर – (1) जहाों बेलनाकार हेडर लगाए जाते हैं, उनका अवधकतम अनुमत
काययशील दबाि समीकरण (6/1) द्वारा वनधायररत वकया जाना चावहए।
(2) वसरो ों से जुड़े और अवधकतम अनुमत काययशील दबाि की गणना करने की विवध वनम्नवलक्तखत
सोंशोधन के अध्यधीन विवनयम 246 के उप-विवनयम (6) के खोंड (ख) के अनुसार होगी:-
K = 0.19 वसरो ोंके आतोंररक भाग अथिा फ्लैंज और बट जो हैडर में िेल्ड वकए हुए हो; हेतु
= 0.28 वीकीकृ त तरीके से हैडर से सीधे वसरो ोंको िेल्ड करने हेतु और
D = हैडर का आतोंररक व्यास।
अपेवित मोटाई का वनधायरण वनम्नवलक्तखत सूि से वकया जाना चावहए:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 213
समीकरण (6/8)
जहा,ाँ
P = अवधकतम अनुमत काययशील दबाि के जी/सीएम2(जी) में
f = अवधकतम अनुमत काययशील दबाि जैसावक ऐसे देश की शा ी कोड में उपलब्ध है
वजससे वक सामग्री सोंबोंवधत है के जी/सीएम2(जी) में
t = सबसे कमजोर भाग में प्लेट की मोटाई वम.मी. में
C = 1 वम.मी.,
K = 0.19, वसरो ोंके आतोंररक भाग अथिा फ्लैंज और बट जो हैडर में िेल्ड वकए हुए हो,ों हेतु
= 0.28, वीकीकृ त तरीके से हैडर से सीधे वसरो ोंको िेल्ड करने हेतु
d = हैडर का आतोंररक व्यास।
अध्याय 7
पाइप और वफवटंग्स
249. पाइप – (1) (क) िाष्प-पाइप काबयन स्टील, कास्ट स्टील, अलॉय स्टील और वनकल अलॉय
के हो सकते हैं।
(ख) पाइपो ोंको मजबूती से खीचों ा जा सकता है (कोल्ड अथिा हॉट वफवनश्ड), बट िेल्डेड या विदटयुत
प्रवतरोधक से िेल्डेड हो सकते है।
(2) जहाों, उपयोग की गई सामग्री विवनमायण के देश की सोंवहता और इन विवनयमो ों के
प्रािधानो ों के अनुरूप होती है अलग-अलग तापमान पर सोंवहता में वनवदयष्ट स अनुमेय तनाि के
आोंकड़े वनम्नवलक्तखत में से वकसी भी मामले में विवनयम 256 के तहत प्रस्तुत आिश्यक डेटा से
गणना वकए गए आोंकड़ो ोंके बदले वीकीकार वकए जा सकते हैं, नामतः -
(क) जहाों वनरीिण प्रावधकारी से इस आशय का एक प्रमाण पि प्रस्तुत वकया जाता है
वक यह स्टील, स्टील ग्रेड की आिश्यकताओ ों का अनुपालन करता है (वनरीिण
प्रावधकारी द्वारा विवनवदयष्ट स वकया जाना है) और यह वक काययशील क्तस्थवत के वलए
अनुमेय तनाि जैसा वक विवनमायता देश की सोंवहता में अनुमत है, इन विवनयमो ों के
तहत अनुमत सीमाओ ों के अोंतगयत आता है।
(ख) जहाों इन दबािो ों के वनधायरण का आधार उपलब्ध कराया गया है और इस
आधार पर ऐसा नही ोंपाया जाता वक विवनयमो ों के तहत अनुमेय से अवधक तनाि को
बााया जा सकता है।214 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ग) जहाों पाइपो ोंको आकार देने का कायय प्लेटटस रोल्ड की लोगों ीट्यूडीनल फ्यूजन बट
इलेक्तररक आकय िेक्तल्डोंग द्वारा वकया जाना है, विवनयम 255 के तहत तावलका 7/4 में
बट िेल्डेड पाइपो ोंके वलए वनधायररत सीमाएों लागू नही ोंहोगों ी।
(घ) ऐसे पाइपो ों पर अध्याय -12 में वनधायररत फ्यूजन बट िेक्तल्डोंग के वलए शेल की
न्यूनतम मोटाई से सोंबोंवधत अपेिाओ ोंके अलािा अन्य अपेिाएों लागू होगों ी।
(3) अध्याय -7 में कु छ भी शावमल करने के बािजूद, मेकसय वप्रमाइज में पाइप के वलए हाइडरोवलक
परीिण, वनरीिण प्रावधकारी द्वारा छोड़ा भी जा सकता है:
बशते वक इन पाइपो ों का रेवडयोग्रावफक या अल्ट्रासोवनक तकनीको ों द्वारा पूरी तरह
से गैर विनाशकारी परीिण वकया गया हो:
बशते वक ऐसे पाइपो ों के मामले में, वजनका आोंतररक व्यास 1000 वम.मी. और उससे
अवधक है, पाइप के वनमायण के वलए उपयोग की जाने िाली प्लेटो ोंऔर पाइपो ोंके लोंबे सीम िेल्ड
का गैर विनाशकारी परीिण; उदाहरणाथय, अल्ट्रासोवनक या रेवडयोग्रावफक परीिण द्वारा पूणय
परीिण वकया गया हो और मूल सामग्री और िेल्ड दोनो ोंमें पाइप की मजबूती वनमायता के मेकसय
वप्रमाइजेस में वनधायररत की गई है; और साइट पर वकसी भी आगे के वनमायण कायय और इरेक्शन
के पूरा होने के बाद पाइप के पूरे भाग का, हाइडरोवलक रूप से परीिण वकया गया हो, वजसमें
पाइवपोंग वसस्टम के अवधकतम अनुमत काययशील दबाि के 1.5 गुना से कम दबाि न रहा हो।
बशते यह भी वक साइट पर इन पाइपो ों का हाइडरोवलक परीिण करने के बाद वकसी
भी तरह की खराबी का पता चलने की क्तस्थवत में, खराब पाइपो ोंकी मरम्मत या बदलने,जैसा भी
वनरीिण प्रावधकारी द्वारा अपेवित समझा जाएगा की वजम्मेदारी वनमायता की होगी।
(4) इलेक्तररक फ्यूजन िेल्डेड पाइप वजनका बट-िेल्ड पूरी तरह से रेवडयोग्राफ या अल्ट्रासोवनक रूप
से परीिण वकया गया हो, उन्हें शॉप में हाइडरॉवलक रूप से परीिण करने की आिश्यकता नही ोंहोती
है, बशते वक विवनयम 292 के अनुसार अपेवित परीिण दबाि के अनुरूप साइट पर पूरे पाइप वसस्टम
का हाइडरॉवलक परीिण वकया गया हो।
(5) फ्यूजन िेल्डेड पाइप के मामले में सभी िेल्डेड सीमो ों को प्रस्तुत करने के वलए टेस्ट प्लेटटस को
लोगों ीट्यूडीनल सीम के प्रत्येक छोर पर जोड़ा जाना चावहए और अध्याय -12 की अपेिाओ ों के अनुसार
परीिण वकया जाना चावहए, बशते वक िह एक टेस्ट प्लेट 60 मी. तक की लोंबाई के बहुत से पाइपो ोंका
प्रवतवनवधत्व करती हो और समान ग्रेड की सामग्री और समान हीट टरीटमेंट के अध्यधीन समान मोटाई
की हो।
भाग I
250. टील पाइप की सामग्री – (1) (क) पाइप ओपन हाथय या इलेक्तररक प्रोसेस या वकसी
ऑक्सीजन प्रोसेस द्वारा वनवमयत स्टील से बनाए जाने चावहए।
(ख) हालाोंवक, हॉट वफवनश्ड सीमलेस पाइप बेसेमर स्टील से बने हो सकते हैं।
(ग) बेसेमर स्टील का उपयोग 21 वकग्रा/सेमी² से अवधक दबाि या 260 वडग्री सेक्तियस से अवधक
तापमान के वलए नही ोंवकया जाना चावहए। यवद बेसेमर प्रवहृया का उपयोग वकया जाता है, तो स्टील को
वनरीिण प्रावधकारी द्वारा मान्यता प्राप्त वनमायता द्वारा बनाया जाना चावहए।
(घ) जब पाइप को 399 वडग्री सेक्तियस से अवधक तापमान के वलए उपयोग वकया जाता है तो स्टील को
अपृथक या फु ली वकल्ड प्रकार का होना चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 215
(2) विवनयम 30 की तावलका 2/1 में वदए गए तापमान से अवधक वडजाइन तापमान के वलए
काबयन और वमश्र धातु स्टील पाइप का उपयोग नही ोंवकया जाना चावहए।
(3) 427 वडग्री सेक्तियस से अवधक वडजाइन तापमान हेतु यह सुवनवश्चत करने के वलए विशे
सािधानी बरती जानी चावहए वक पाइप की सतह की क्तस्थवत इन आिश्यकताओ ों के वलए
उपयुि है।
(4) (क) वजस सामग्री से सीमलेस पाइप बनाए जाते हैं, िह विवनयम 49 में पाइप के उपयुि
विवनदेशो ोंके अनुरूप होने चावहए और वजससे विदटयुत प्रवतरोध िाले िेल्डेड पाइप बनाए जाते
है, उन्हें विवनयम 30 में ट्यूबो ोंके उपयुि विवनदेश के अनुरूप होना चावहए।
(ख) ऐसी सामवग्रयाों वजनसे बट्ट िेल्डेड पाइप बनाए जाते हैं, उन्हें विवनयम 253 के तहत
तावलका 7/3 की आिश्यकताओ के अनुरूप होना चावहए।
251. पाइप की ल्पथवत - (1) सभी पाइप व्यािसावयक रूप से सीधे होने चावहए और उनमें
लोगों ीट्यूडीनल सीवमोंग, ग्रूविोंग, क्तब्लस्टररोंग या अन्य सतह दो के वचन्ह नही ों होना चावहए। पाइपो ों के
वसरो ोंको स्क्वायर काटा जाना चावहए।
(2) पाइप को नीचे दी गई िहनीयता की सीमा के भीतर बनाया जाना चावहए:-
तावलका 7/1
हृम सों. श्रेणी िहनीयता
नोवमनल
बाहरी व्यास
मोटाई
51 वम.मी. तक और 51 51वम.मी. से
वम.मी. सवहत ऊपर
(1) (2) (3) (4) (5)
1. सीमलेस या विदटयुत
प्रवतरोध िेल्डेड विवनयम 49 के अनुसार
(*ई.आर.डब्लू)
2. + कोई सीमा नही ों
बट िेल्डेड ± 1% ± 1%
- 12.5%
भाग - II
252. मैके वनकल परीिणो ंके परीिण सेटो ंकी संख्या- (1) पाइपो ोंकी सोंख्या वजन पर मैके वनकल
परीिण वकए जाएोंगे, वनम्नानुसार होगों े:-
तावलका 7/2
सीमलेस पाइप विवनयम 49 के अनुसार
िेल्डेड पाइप बनाए गए पाइपो ोंकी लोंबाई का 2 प्रवतशत216 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) 454 वडग्री सेक्तियस से अवधक वडजाइन वकए गए तापमान िाले पाइप के मामले में, 114
वम.मी. बाहरी व्यास से अवधक व्यास िाले प्रत्येक पाइप का परीिण वकया जाना चावहए।
253. परीिण – (1) 102 वम.मी. नॉवमनल बोर तक और 102 वम.मी. िाले, पाइप के वलए
फ़्लैटवनोंग टेस्ट अध्याय -2 की वनम्नवलक्तखत आिश्यकताओ ोंके अनुसार होगों े :-
(क) कोल्ड डरॉन सीमलेस वनमायण हेतु - विवनयम 48 के उप विवनमय (4)
(ख) हॉट वफवनश्ड सीमलेस वनमायण हेतु - विवनयम 49 के उप विवनमय (10)
(ग) विदटयुत प्रवतरोधी िेल्डेड पाइप हेतु - सोंबद् सामग्री विवनदेशो ोंके अनुसार।
उन पाइपो ोंके वलए जहाों दीिार की मोटाई और व्यास के बीच का अनुपात उपरोि विवनयम में
वनवदयष्ट स सपाट सतहो ों के बीच की दूरी को बनाए रखने की अनुमवत नही ों देता, यह पाइप के 2/3 बोर
तक सीवमत होनी चावहए।
(2) 102 एम एम से अवधक नोवमनल बोर िाले पाइपो ों के वलए कोल्ड बेंड टेस्ट हेतु, प्रत्येक चयवनत
पाइप के एक एोंड से कम से कम एक 38 वममी. चौड़ी कटी हुई पट्टी, को वकया जाता जब ठोंड है, और
वबना दरार या खराबी को वदखाए वबना मूल किेचर राउोंड की वदशा में दोगुनी हो जाती है, तो बार का
व्यास :
10 वम.मी. की मोटाई िाली और मोटाई तक की पाइप हेतु 3 गुना मोटाई
10 वम.मी. से अवधक मोटाई िाली पाइप हेतु 4 गुना मोटाई
(3) िेल्ड पर बेंड टेस्ट के वलए ;पट्टी के बीच के पास िेल्ड िाले प्रत्येक चयवनत पाइप के एक एोंड से
कम से कम 38 वममी. चौड़ी कटी हुई पट्टी, को जब कोल्ड वकया जाता है, तो वबना दरार या दो रवहत,
एक बार के चारो ोंओर मूल किेचर राउोंड की वदशा में डबल वकया जाता है,जब बार का व्यास परीिण
वकए गए टुकड़े की मोटाई के आठ गुना के बराबर होता है, तब िेल्ड को अवधकतम बेंवडोंग की वबोंदु पर
रखा जाता है।
ऐसे मामलो ों में जहाों पाइप का बाहरी व्यास दीिार की मोटाई के 8 गुना से कम है, पहले िाले
पाइप का व्यास पाइप के नॉवमनल बोर के 4 या ⅔ के बराबर होना चावहए जो भी इनमें से कम हो ।
(4) अवतररि परीिण; परीिण के वलए चयवनत पाइप ऊपर वनवदयष्ट स वकसी एक या अवधक
परीिणो ों में विफल की क्तस्थवत में उसी प्रकार के दो और परीिण उसी बैच के समान या अन्य पाइप से
वकए जा सकते हैं। इनमें से कोई भी परीिण विफल होने की क्तस्थवत में पेश वकए गए पाइपो ोंको वफर से
गरम वकया जा सकता है और उनका वफर से परीिण वकया जा सकता है। पुनः वकया गया परीिण
सोंतो जनक रहने की क्तस्थवत में पाइपो ों को वलया जाना चावहए बशते वक िे अन्य आिश्यकताओ ों का
अनुपालन करते हो,ों लेवकन यवद वफर से विफलता होती है, तो परीिण को दशायने िाले पाइपो ों को नही ों
वलया जाना चावहए।
(5) तन्यता परीिण अध्याय -2 की आिश्यकताओ ों के अनुसार होगा ।
(6) िाल्व और वफवटोंग हेतु परीिण, विवनयम 191 के उप विवनयम (5) की आिश्यकताओ ों के अनुसार
होगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 217
तावलका 7/3: काबषन टील
हृम सों. बट िेल्डेड पाइप
के जी/िगय न्यूनतम इलोगों ेशन प्रवतशत
वम.मी. में मुख्य
203 वम.मी. 51 वम.मी.
तन्यता तीव्रता .सल्फर फोस्फोर
6 वम.मी. प्रवतशत स
पाइप के प्रकार
की 6 वम.मी. की (अवधक प्रवतशत
से से 6 वम.मी.
मोटाई 6 वम.मी. की मोटाई िाले तम) (अवधक
कम अवधक की मोटाई
िाले और मोटाई से कम और उससे तम)
नही ों नही ों से कम
उससे अवधक
अवधक
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
1. िेल्ड की ओर से
पाइप से क्तस्टरप को 35 44 20 18 32 30 0.05 0.05
काटना और उन्हे
किय क्तस्थवत में जाोंच
करना
2. वफ़वनश्ड पाइप से
वलए गए टेस्ट 35 44 25 23 - - 0.05 0.05
पाइप की लोंबाई
(वग्रप हेतु पाइप के
छोर को प्लग
वकया जाना)
3. के जी/िगय
वम.मी. में मुख्य 203 वम.मी. पर न्यूनतम एलोगों ेशन प्रवतशत
तन्यता िमता फोस्फोर
सल्फर
4. चयवनत नमूनो ों वनम्न स
13 वम.मी. 13 वम.मी. की प्रवतशत
को टराोंवीकसयली वल वनम्नवल प्रवतशत
की मोटाई मोटाई से कम (अवधक
काटना क्तखत क्तखत से 6 वम.मी. की (अवधक
िाले और और 6 वम.मी. की तम)
से अवधक मोटाई से कम तम)
उससे मोटाई से कम
कम नही ों
अवधक नही ों
नही ों
5. 36 44 23 20 18 0.05 0.05
254. वनमाषण, हीट टरीटमेंट और मावकिं ग की विवध (1) वकसी भी ऐसे काम को पूरा करने के वलए
वजसमें हीवटोंग शावमल है, चाहे पाइप को गमय करके बेंवडग हेतु या वकसी अन्य समान उद्देश्य के वलए,
पाइप को सािधानी से एनील्ड कर देना चावहए।
(2)(क) कोल्ड डरॉन सीमलेस काबयन स्टील पाइप और िेल्डेड काबयन स्टील पाइप की सामान्य
क्तस्थवत में आपूवतय की जानी चावहए।
(ख) हॉट वफवनश्ड सीमलेस काबयन स्टील पाइप की हॉट वफवनश्ड क्तस्थवत में या सामान्य
क्तस्थवत में, वनमायता के विकि के अनुसार आपूवतय की जानी चावहए।
(ग) सीमलेस अलॉय स्टील पाइप चाहे कोल्ड वफवनश्ड हो या हॉट वफवनश्ड हो, और िेल्डेड
पाइपो ोंकी सामान्य और टेम्पडय क्तस्थवत में आपूवतय की जानी चावहए।
(घ) उपयोगकतायओ ों और वनमायता के बीच सहमवत से, पाइप की सामान्य और टेम्पडय क्तस्थवत
से वभन्न क्तस्थवत में भी आपूवतय की जा सकती है, और वजस क्तस्थवत में िे बाद में बदलाि के218 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वलए उपयुि होगों े और उपयोगकताय को आिश्यक गुण का उपयोग करने के वलए वजसमें
हीट टरीटमेंट के वि य में सूवचत वकया जाएगा।
(3)(क) (i) पाइप की बेवडोंग और फावमिंग (ररड्यूवसोंग अथिा वीकेवजोंग) सोंबोंधी ऑपरेशन वकसी
भी हॉट या कोल्ड तरीके से और वकसी भी रेवडयस के वलए वकया जाना चावहए, वजसके
पररणामवीकरूप सतह से दरार, बकल या अन्य दो ो ों को हटाया जाएगा जैसा वक वडजाइन में
वनवदयष्ट स वनरीिण की विवध में वनधायररत है।
(ii) काबयन स्टील सामग्री के वलए तब तक पोस्ट बेंवडोंग या पोस्ट फॉवमिंग हीट टरीटमेंट की
आिश्यकता होती है,वजसमें 19 वम.मी. से अवधक मोटाई का नॉवमनल िॉल हो, जब तक वक
सामान्य तापमान पर बेंवडोंग अथिा फॉवमिंग सोंबोंधी कायय नही ोंवकया जाता अथिा पूरा नही ोंवकया
जाता है, जहाों आगे हीट टरीटमेंट की आिश्यकता नही ोंहोती है।
(iii) जहाों अपेवित हो, हीट टरीटमेंट को सामान्य या तनाि मुि वकया जाना चावहए जैसा भी
मामला हो ।
(ख) सभी फे ररवटक अलॉय स्टील सामग्री हेतु पोस्ट बेवडोंग या पोस्ट फॉवमिंग हीट टरीटमेंट
अपेवित होगी, वजसमें नॉवमनल पाइप का आकार 100 वम.मी. और उससे अवधक या
नॉवमनल मोटाई 13 वम.मी. या उससे अवधक के हैं।
(ग) (i) यवद हॉट बेवडोंग या फॉवमिंग की जाती है तो सामग्री को वडजाइन के अनुसार अपेवित
सामान्य और टेंपर या टेंपररोंग हीट टरीटमेंट वदया जाएगा।
(ii) कोल्ड ऑपरेशन के वलए, टेम्पररोंग हीट-टरीटमेंट लागू वकया जाना चावहए।
(4) मावकिं ग विवनयम 329 के अनुसार की जाएगी।
255. िाष्प िाले पाइप और वफवटंग - वजस दबाि और तापमान की सीमा के भीतर पाइप, टीज,
िाोंचेज आवद का उपयोग वकया जाएगा, िह नीचे दी गई तावलका 7/4 के अनुसार होगा।
तावलका 7/4: अवधकतम अनुमत कायषशील दबाि और तापमान
हृम सं. अवधकतम अवधकतम अनुमेय उत्पाद के
विवनयम 8 के
अनुमत तापमान प्रकार
अनुसार वनमाषण की प्रवहृया
कायषशील
सामग्री समूह °C
दबाि
(1) (2) (3) (4) (5) (6)
1. M1/Gr1, कोल्ड डरॉन सीमलेस कोई प्रवतबोंध विवनयम 30 की तावलका सीधा, बेंड
M1/Gr2 नही ों 2/1 के अनुसार या वफवटोंग
2. हॉट वफवनश्ड सीमलेस कोई प्रवतबोंध विवनयम 30 की तावलका िही
नही ों 2/1 के अनुसार
3. बट िेल्डेड *अवधकतम 21 kg/cm2 260 िही
नोवमनल बोर अनुमत 102 (g)
वम.मी.+
4. इलेक्तरक रेवजस्टेंस िेल्डेड कोई प्रवतबोंध विवनयम 30 की तावलका िही
नही ों 2/1 के अनुसार[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 219
5. कास्ट स्टील काक्तस्टोंग कोई प्रवतबोंध 454 िही
नही ों
M3/Gr1, कोल्ड डरान सीमलेस और कोई प्रवतबोंध विवनयम 30 की तावलका िही
6. M3/Gr2, काक्तस्टोंग नही ों 2/1 के अनुसार
M4/Gr1
7. M5A/Gr1 कोल्ड डरान सीमलेस और कोई प्रवतबोंध विवनयम 30 की तावलका िही
हॉट वफवनश्ड सीमलेस नही ों 2/1 के अनुसार
256. टील पाइप - स्टील पाइप पर अवधकतम अनुमत काययशील दबाि वनम्नवलक्तखत सूि द्वारा
वनधायररत वकया जाना चावहए : -
(क) जहाों गणना का आधार बाहरी व्यास होता है।
2 f E (t – C)
P = ------------- समीकरण (7/1)
D – t + C
जहााँ,
t = पाइप की न्यूनतम मोटाई (वम.मी.),
P = अवधकतम अनुमत काययशील दबाि (kg/cm2 (g),
f = विवनयम 170 के तहत वनधायररत अनुमत तनाि (kg/cm2)
D = पाइप का बाहरी व्यास (वम.मी.),
E = दिता कारक,
= 1.0 है, अध्याय-2 की अपेिा के अनुरूप सीमलेस और इलेक्तररक रेवजस्टेंस िेल्डेड
स्टील पाइप तथा इलेक्तररक फ्यूजन िेल्डेड स्टील पाइप हेतु, वजसमें िेल्ड की पूणयतः
रेवडयोग्राफ़ी अथिा अल्ट्रासोवनक तरीके से जाोंच की जाती है,
= 0.95, अध्याय-2 की अपेिा के अनुरूप इलेक्तररक फ्यूजन िेल्डेड स्टील पाइप हेतु
= 22 वम.मी. सवहत और 22 वम.मी. तक टी के मान िाले 0.90, िेल्डेड स्टील पाइप हेतु
= 0.85, 22 वम.मी. के ऊपर और 29 वम.मी. तक और 29 वम.मी. सवहत टी के मान
िाले िेल्डेड स्टील पाइपो ोंके वलए
= 0.80, 29 वम.मी. के ऊपर टी के मान िाले िेल्डेड स्टील पाइपो ोंके वलए
C = 0.75 वम.मी.
पाइप हेतु अपेवित न्यूनतम मोटाई का वनधायरण वनम्नवलक्तखत सूि से वकया जाना चावहए :
समीकरण(7/2)220 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
जहााँ,
t = पाइप की पररकवलत अपेवित न्यूनतम मोटाई (वम.मी.)
P = अवधकतम अनुमत काययशील दबाि (kg/cm2 (g)),
f = विवनयम 170 के तहत यथा वनधायररत अनुमत तनाि (kg/cm2)
D = पाइप का बाहरी व्यास (वम.मी.),
E = विवनयम 171 के अनुसार वलगामेंट दिता,
C = 0.75 वम.मी.
(ख) जहााँ आोंतररक व्यास गणना का आधार होता है
2 f E (t – C)
P = ------------- समीकरण (7/3)
d + t – C
जहााँ,
t = पाइप की न्यूनतम मोटाई (वम.मी.),
P = अवधकतम अनुमत काययशील दबाि (kg/cm2 (g)),
f = विवनयम 170 के तहत यथा वनधायररत अनुमत तनाि (kg/cm2)
d = पाइप का आोंतररक व्यास (वम.मी.)
E = दिता कारक,
= 1.0, अध्याय-2 की आिश्यकता के अनुरूप सीमलेस और इलेक्तररक रेवजस्टेंस
िेल्डेड स्टील पाइप तथा इलेक्तररक फ्यूजन िेल्डेड स्टील पाइप हेतु वजसमें िेल्ड की
पूणयतः रेवडयोग्राफ़ी अथिा अल्ट्रासोवनक तरीके से जाोंच की जाती है
= 0.95, अध्याय-2 की आिश्यकता के अनुरूप इलेक्तररक फ्यूजन िेल्डेड स्टील पाइप
हेतु
= 0.90 है, 22 वम.मी. तक और 22 वम.मी. सवहत टी के मान िाले िेल्डेड स्टील पाइप
हेतु
= 0.85, 22 वम.मी. के ऊपर और 29 वम.मी. तक और 29 वम.मी. सवहत टी के मान
िाले िेल्डेड स्टील पाइप के वलए
= 0.80, 29 वम.मी. के ऊपर टी के मान िाले िेल्डेड स्टील पाइप के वलए
C = 0.75 वम.मी.
पाइप हेतु अपेवित न्यूनतम मोटाई का वनधायरण वनम्नवलक्तखत सूि से वकया जाना चावहए:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 221
समीकरण (7/4)
जहााँ,
t = पाइप की पररकवलत अपेवित न्यूनतम मोटाई (वम.मी.)
P = अवधकतम अनुमत काययशील दबाि kg/cm2 (g),
f = विवनयम 170 के तहत यथा वनधायररत अनुमत तनाि (kg/cm2)
d = पाइप का आोंतररक व्यास (वम.मी.)
E = = विवनयम 171 के अनुसार वलगामेंट दिता,
C = 0.75 वम.मी.
257. काट टील पाइप - (1) सामग्री विवनयम 50 से 57 के अनुरूप होगी।
(2) कास्ट स्टील पाइप पर अवधकतम अनुमत काययशील दबाि का वनधायरण वनम्नवलक्तखत सूि द्वारा
वकया जाएगा: -
2S (t – 0.15D – C)
P= ---------------------- समीकरण(7/5))
D
जहााँ,
t = न्यूनतम मोटाई,
P = अवधकतम अनुमत काययशील दबाि,
D = पाइप का बाहरी व्यास,
S = अनुमत काययशील दबाि जैसा वक तावलका 7/5 अथिा विवनयम 249 में
विवनवदयष्ट स है।
C = 0.64 सेमी222 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 7/5: काबषन और अलॉय काट टील पाइप हेतु अवधकतम अनुमेय कायषशील दबाि
वनवदयष्ट स तापमान पर प्रत्येक मामले में वनम्नवलक्तखत आधार पर प्राप्त मान की गणना वनम्नवलक्तखत आधार
पर की जाती है:-
454°C सवियस T.S. E E S
t t r
तापमान पर अथिा ------ अथिा ---- और ---- अथिा ---- अथिा S
c
उससे कम 2.7 1.5 1.5 1.5
तापमान के वलए
454°C सवियस E S
t r
तापमान पर अथिा ---- or ---- or S .
c
उससे अवधक 1.5 1.5
तापमान के वलए
जहाों
T.S. = सामान्य तापमान पर सामग्री की न्यूमतम तन्यता िमता,
E = तापमान ‘t’ पर िामय यील्ड प्ाोंइट (0.2% प्रूफ स्टरेस)
t
S = 100,000 घटो ों में 1 प्रवतशत के इलॉनगेशन (हृीप) के वलए सवियस तापमान पर औसत
c
तनाि,
S = वकसी तापमान पर 100,000 घोंटो ों में रप्चर लाने के वलए सवियस तापमान पर औसत
r
तनाि और वकसी भी मामले में सवियस तापमान पर रप्चर लाने के वलए न्यूमतम तनाि
1.33 गुना से अवधक नही ोंहोगा।
भाग III
258. काबषन टील पाइप के फ्लैंवजज़ - (1) काबयन स्टील फ्लैंवजज के वलए सामग्री, जहाों फोजय,
कास्ट या प्लेट से काटी हुई हो (पाइप के साथ इोंवटग्रल फोर्ज्य िाोंचेज को छोड़कर), ओपन हथय या
इलेक्तररक प्रवहृया या वकसी भी ऑक्सीजन प्रवहृया द्वारा तैयार स्टील से बनी हुई होगी।
(2) काबयन स्टील फ्लैंवजज का उपयोग 454 वडग्री सेक्तियस से अवधक तापमान के वलए
नही ों वकया जाना चावहए। ऐसे फ्लैंवजज वबना िेल्ड के बनायी जाएगी और लेवमनेशन या
िेक्तल्डोंग से होने िाली अन्य िुवटयो ोंसे मुि होगी।
(3) खाली फ्लैंवजज हल्के स्टील या कास्ट स्टील के होगों े तथा इन फ्लैंवजज की मोटाई
वजनके साथ इनको जोड़ा गया है उनकी तुलना में कम नही ों होगी। सामग्री इन विवनयमो ों के
अध्याय-2 या अध्याय-4 के प्रासोंवगक विवनयम में वनवदयष्ट स आिश्यकताओ ोंके अनुरूप होगी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 223
259. अलॉय टील पाइप के फ्लैंवजज़ – (1) (क) अलॉय स्टील के फ्लैंवजज के वलए सामग्री,
जहाों फोजय, कास्ट या प्लेट से कटी हुई हो (पाइप के साथ इोंवटग्रल रूप से फोर्ज्य िाोंचेज को छोड़कर)
ओपन हथय या इलेक्तररक प्रवहृया द्वारा उत्पावदत स्टील से बना होगी।
(ख) फ्लैंवजज वबना िेल्ड के बनायी जाएगी और लेवमनेशन या अन्य िुवटयो ोंसे मुि होगी।
(ग) अलॉय स्टील के फ्लैंवजज की सामग्री विवनयम 30 के प्रािधानो ोंके अनुरूप होगी।
(घ) फ्लैंवजज की सामग्री उन पाइपो ोंजैसी होनी चावहए वजनसे उन्हें जोड़ा जाना है।
(ड) फ्लैंवजज को इस तरह से वडजाइन वकया जाना है वक उनमें डाला गया कु ल दबाि अवधकतम
वीकीकायय दबाि से अवधक न हो जैसा वक विवनयम 170 में उक्तिक्तखत मानदोंडो ों द्वारा वनधायररत वकया
गया है।
(2) अलॉय स्टील के ब्लैंक फ्लैंवजज की मोटाई उस फ्लैंवजज से कम नही ोंहोनी चावहए वजससे उन्हें
जोड़ा जाना है और सामग्री उसी फ्लैंवजज के समान होगी।
260. अलौह फ्लैंवजज़ – (1) इस अलौह फ्लैंवजज के वलए सामग्री िोजों की होगों ी।
(2) रासायवनक सोंरचना विवनयम 183 के उप-विवनयम (1) के खोंड (iv) की आिश्यकताओ ों के
अनुरूप होगी।
(3) जब फ्लैंवजज को कॉपर पाइप से िेवजोंग द्वारा जोड़ा जाता है, तो उन्हें इस तरह से अवतररि रूप
से सुरवित वकया जाएगा अथायत फलैयज में एक शोंिाकार बोर बनाकर वकया जाएगा तावक फलैयज से
वनकासी का प्रवतरोध पूरी तरह से िैवजोंग पर वनभयर न हो।
261. फ्लैंवजज़ पर स्क्रू लगाना - (1) जहाों फ्लैंवजज को स्क्रू से सुरवित वकया जाता है , िहााँ पाइपो ों
पर और फ्लैंवजज में स्क्रू थ्रेड को फ्लैंज के बॉस के ठीक पीछे एक वबोंदु पर समाप्त करने की व्यिस्था
की जाएगी। फ्लैंज का स्क्रू वकए जाने के बाद, पाइप का रोलर एक्सपेंडर द्वारा फ्लैंज में विस्तार वकया
जाएगा।
(2) इस तरह के स्क्रू वकए गए और विस्ताररत फ्लैंवजज का उपयोग, भाप के वलए 31.5
वकग्रा/सेमी2(जी) के अवधकतम वीकीकायय दबाि और 3990 सेक्तियस के अवधकतम तापमान के वलए
तथा 42 वकग्रा/सेमी2 (जी) के अवधकतम वीकीकायय काययशील दबाि के वलए फीड हेतु वकया जा सकता
है।
262. लूज फ्लैंवजज़ – (1)(क)लूज फ्लैंवजज का उपयोग िहााँ वकया जा सकता है जहाों पाइप के छोर
पर जोड़ इोंटीग्रल रूप से मेटल फे स के बने होते हैं। िैकक्तिक रूप से इन जोड़ो ोंको िेल्डेड या सील
िेल्ड वकया जा सकता है।
(ख) लूज फ्लैंवजज पररवशष्ट स-च में दी गई तावलका के अनुरूप होगों े।
(2) जहाों जोड़ इोंवटग्रल फ्लैंवजज से बनाया जाता है, मशीवनोंग के बाद ये समीकरण (7/2)के
द्वारा की गई गणना के अनुसार पाइप की वडजाइन की गई मोटाई से कम मोटाई के नही ोंहोगों े।
263. फ्लैंवजज़ पर िेल्ड - (1) जहाों फ्लैंवजज को िेल्ड वकया जाता है, िेक्तल्डोंग ऑक्सी-एवसवटलीन या
मेटल आकय प्रोसेस द्वारा की जाएगी; किर वकए गए इलेररोड के साथ बाद िाली प्रवहृया विवनयम
71 से 76 के अनुरूप होगा।
(2)(क) िेल्ड का अनुपात, वचि 7/10 से 7/34( इस अध्याय का भाग v में वनम्न प्रकार से
वनम्नवलक्तखत तावलका में दशायए अनुसार होगा:-224 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
1. िेक्तल्डोंग नेक फ्लैंज, वचि 7/10
प्रकार 2. मेटल आकय िेक्तल्डोंग के वलए फ्लैंज पर 'फे स एोंड बैक' िेल्डेड। वचि 7/26
3. मेटल आकय िेक्तल्डोंग के वलए फ्लैंवजज पर 'बोर एोंड बैक' िेल्डेड। वचि 7/27 और 7/28
4. मेटल आकय िेक्तल्डोंग के वलए फ्लैंवजज पर 'फे स एोंड वफलेट' िेल्डेड। वचि 7/29
5. मेटल आकय िेक्तल्डोंग के वलए फ्लैंज पर 'बोर एोंड वफलेट' िेल्डेड। वचि 7/ 30 और 7 /
31
6. मेटल आकय िेक्तल्डोंग के वलए फ्लैंज पर 'क्तलप ऑन' िेल्डेड। वचि 7/ 32
7. ऑक्सी-एवसवटलीन िेक्तल्डोंग के वलए बॉस्ड फ्लैंज पर 'क्तलप ऑन' िेल्डेड। वचि 7 /
33
8. सॉके ट िेल्डेड फ्लैंज, वचि 7/34
फ्लैंज पाइप पर टाइट वफट नही ोंहोना चावहए।
(ख) फ्लैंज के बोर और पाइप के बाहरी व्यास के बीच की अवधकतम जगह वकसी भी वबोंदु पर 3
वम.मी. होनी चावहए, और व्यास के दोनो ों ओर की क्लीयरेंस का योग 5 वम.मी. से अवधक नही ों होना
चावहए।
नोट: 1 से 7 प्रकार के वचिो ों में वदखाए गए सभी आयाम तैयार आकार से सोंबोंवधत
हैं।
प्रत्येक प्रकार के वलए वडजाइन की शतें इस प्रकार हैं:
सभी अवधकतम वीकीकायय काययशील दबाि और तापमान की क्तस्थवतयो ोंटाइप 1, 2 और
3 फ्लैंवजज के वलए।
42 वकग्रा/सेमी 2 (जी) तक और 42 वकग्रा/सेमी 2 (जी) सवहत सभी दाब क्तस्थवतयो ों और
3990 सेक्तियस तक के वडजाइन तापमान के वलए टाइप 4 और 5 फ्लैंवजज ।
17.6 वकग्रा/सेमी 2 (जी) तक और 17.6 वकग्रा/सेमी 2 (जी) सवहत सभी दाब क्तस्थवतयो ों
और 3990 सेक्तियस तक के वडजाइन तापमान के वलए टाइप 6 और 7 फ्लैंवजज,
वसिाय इसके वक टाइप 6 के बॉस्ड फ्लैंवजज का उपयोग नोवमनल बोर में 304 वम.मी.
से अवधक पाइपो ोंपर नही ोंवकया जाएगा, न ही टाइप 7 के बॉस्ड फ्लैंवजज का उपभोग
नोवमनल बोर में 152 वम.मी. पाइप पर वकया जाएगा।
सभी अवधकतम वीकीकायय काययशील दबाि और तापमान की क्तस्थवत के वलए टाइप 8
फ्लैंवजज। इस प्रकार के फ्लैंवजज का उपयोग के िल 51 वम.मी. तक और 51 वम.मी.
सवहत नोवमनल बोर िाले पाइपो ों के वलए वकया जाएगा। इन फ्लैंवजज का उपयोग िहाों
नही ोंवकया जाना चावहए जहाों गोंभीर िरण या िय होने की सोंभािना हो।
(3) टाइप 1,2,3,4 और 5 काबयन स्टील टाइप के फ्लैंवजज पर मेटल आकय प्रोसेस द्वारा िेल्ड वकया
जाता है, जहाों िेल्ड ररसेस की वडजाइन गहराई 20 वम.मी. से अवधक होती है, िहाों िेल्ड स्टरेस से
मुि होना चावहए। और अलॉय स्टील पाइप में फ्लैंवजज को जोड़ने िाले सभी िेल्ड स्टरेस से मुि
होना चावहए।
(4) जहाों ऑक्सी-एवसवटलीन िेक्तल्डोंग द्वारा टाइप 1 फ्लैंवजज को जोड़ा जाता है, िेल्ड को
वनम्नवलक्तखत आिश्यकताओ ों के अनुसार सामान्यीकृ त वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 225
(क) हल्के स्टील पाइप में िेल्ड को 900 वडग्री और 950 वडग्री सेक्तियस के बीच के
तापमान पर धातु को गमय करके सामान्य वकया जाएगा, वफर 102 वम.मी. बोर से
कम या 102 वम.मी. बोर तक के पाइप के वलए तापमान को कम से कम दो
वमनट तक बनाए रखा जाएगा, और 102 वम.मी. से अवधक बोर के पाइप के वलए
यह समय पाोंच वमनट से कम नही ोंहोगा।
(ख) अलॉय स्टील से बने पाइपो ों में िेल्ड को 925 वडग्री और 975 वडग्री सेक्तियस के
बीच के तापमान पर धातु को गमय करके सामान्य वकया जाएगा, वफर 102 वम.मी.
बोर सवहत और 102 वम.मी. बोर तक के पाइप के वलए तापमान को कम से कम
दो वमनट तक बनाए रखा जाएगा, और 102 वम.मी. से अवधक बोर के पाइप के
वलए यह समय पाोंच वमनट से कम नही ोंहोगा।
(ग) 950° और 975°C के बीच के उच्च तापमान का उपयोग, 0.12 प्रवतशत सवहत
और 0.12 प्रवतशत तक काबयन सामग्री िाले अलॉय स्टीि के
वलए वकया जाएगा और 925° और 950°C के बीच के वनम्न तापमान का उपयोग
0.12 प्रवतशत से अवधक काबयन िाले अलॉय स्टीि के वलए वकया जाएगा।
(घ) जोड़ को सामान्य करने के बाद धीमा और समान शीतलन सुवनवश्चत करने के वलए
उपयुि मफ या एस्बेस्टस कपड़े से ढका जाना चावहए।
(ङ) 102 वम.मी. बोर तक के पाइप में िेल्ड का सामान्यीकरण, िेक्तल्डोंग फ्लेम से वकया
जा सकता है, तापमान को एक कलर काडय की सहायता से आोंका जा सकता है,
या एक या एक से अवधक थमो-कपल या एक ऑवप्टकल पाइरोमीटर के माध्यम
से मापा जा सकता है।
(च) 102 वम.मी. बोर से अवधक के पाइप में िेल्ड का सामान्यीकरण अवधमानतः एक
पोटेबल पाइप नॉमयलाइवजोंग फनेस या मफल में वकया जाएगा, तापमान को एक
या एक से अवधक थमो-कपल या एक ऑवप्टकल पाइरोमीटर के माध्यम से मापा
जा रहा है।
(छ) विवनवदयष्ट स तापमान तक हीट टरीटमेंट िाले िेि की चौड़ाई, िेल्ड सुदृढीकरण के
दोनो ोंओर कम से कम 13 वम.मी. तक होनी चावहए।
(5) िेल्ड के स्टरेस रीवलविोंग में पालन की जाने िाली प्रवहृया अपेवित विवनयम 123 के अनुसार
होगी और स्टरेस रीवलविोंग वनम्नवलक्तखत विवधयो ोंमें से वकसी एक द्वारा की जाएगी: -
(क) (i) पोटेबल मफल फनेस, इोंडक्शन कॉइल या अन्य उपयुि उपकरणो ों का उपयोग
करके लोकल हीवटोंग की जायेगी और टरीट वकए गए िेि पर समान रूप से गमय करने
का विशे ध्यान रखा जाएगा।
(ii) ऐसी प्रवहृयाओ ों का उपयोग वजन पर पयायप्त वनयोंिण नही ों होता, जैसे गैस टॉचय का
मैनुअल सोंचालन, उनके प्रयोग की अनुमवत नही ोंहै।
(iii) तापमान को पाइप की सतह पर वपन वकए गए, िेल्डेड या अन्यथा उपयुि रूप से
सोंलग्न थमो-कपल द्वारा मापा जाएगा और जहाों आिश्यक हो, लौ के प्रभाि से सोंरवित
वकया जाएगा।
(ख) स्टेशनरी औद्योवगक भट्टी में तापन के दौरान जोड़ के तापमान को थमो-कपलो ों द्वारा
मापा जाएगा जो भट्ठी के भीतर इस प्रकार रखे गए हो ोंवक सोंयुि तापमान का सही माप
दे सकें ।226 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
264. मानक फ्लैंवजज़ - फ्लैंवजज का आकार और मोटाई तथा उनके बोल्ट्ो ोंकी सोंख्या और आकार
पररवशष्ट स-च में दशायए गए अनुसार होगों े।
265. जोड - (1) इन विवनयमो ों में प्रािधान है वक साधारण बोल्ट् िाले फ्लैंज जोड़ा और विशे
प्रकार के जोड़ो ों का उपयोग वकया जा सकता है। जो वक वनरीिण प्रावधकारी या मुख्य वनरीिक, जैसा
भी मामला हो, के अनुमोदन के अध्यधीन है।
(2) पाइप, िाल्व और वफवटोंग के वलए पाइप या सॉके ट िेल्डेड जोड़ो ों के िेल्डेड बट जोड़ो ों
को आकय िेक्तल्डोंग प्रवहृया द्वारा बनाया जाएगा और प्रभािी ढोंग से पोस्ट िेल्ड ताप प्रवहृया की
जाएगी जैसा की विवनयम 123 में वनधायररत वकया गया है।
(3) ताप प्रवहृया वनम्नवलक्तखत विवधयो ोंमें से वकसी एक द्वारा की जाएगी:
(क)(i) पोटेबल मफल, इोंडक्शन कॉइल या अन्य उपयुि हीवटोंग उपकरणो ों का
उपयोग करके लोकल हीवटोंग की जायेगी।
(ii) उपचाररत िेि पर समान रूप से ताप लागू करने का विशे ध्यान रखा जाएगा।
(iii) ऐसी प्रवहृयाओ ों के उपयोग, जैसे वक मैनुअल ऑपरेटेड गैस टॉचय जो इस उद्देश्य के
वलए पयायप्त वनयोंिण प्रदान नही ोंकरते हैं, की अनुमवत नही ोंहै।
(iv) तापमान को बट िेल्डेड वप्रपरेशन की चौड़ाई से कम से कम तीन गुना चौड़ाई के
मेटल के पेरीफे रल बैंड पर वसमेवटरकली बनाए रखा जाएगा।
(v) तापमान को पाइप की सतह पर वपन वकए गए, िेल्डेड या अन्यथा उपयुि रूप से
सोंलग्न थमो-कपल द्वारा मापा जाएगा और जहाों आिश्यक हो, लौ के प्रभाि से सोंरवित
वकया जाएगा।
(ख) स्टेशनरी भट्टी में तापन की क्तस्थवत में, जोड़ के तापमान को थमो-कपलो ों द्वारा मापा
जाएगा, वजन्हें भट्टी में इस प्रकार रखा जाएगा वक सोंयुि तापमान का सही माप प्राप्त हो
सके ।
(ग) विदेशी कोड या मानको ों के तहत बनाई गई सामग्री वजन्हें विवनयम 3 के उप विवनयम
(2) के खोंड (क) के तहत वीकीकार वकया जाता है, के मामले में ताप प्रवहृया की विवध कोड
या मानको ोंमें जैसा वनवदयष्ट स है, के अनुरूप होगी।
(4) इस तरह के बट्ट-िेल्डेड जोड़ वचि 7/10 के अनुरूप होने चावहए।
266. पाइपलाइनो ंका पूणष िेल्ड परीिण - (1) पाइपलाइनो ोंका पूणय िेल्ड परीिण के प्रयोजन के
वलए, पाइपलाइनो ोंको वनम्नवलक्तखत दो िगों में विभावजत वकया जाएगा, नामतः
(क) िगय -I: सेिा शतों के वलए पाइपलाइन वजसमें वनम्नवलक्तखत सीमाओ ों में से
वकसी एक को पार वकया गया है।
(i) वडजाइन तापमान 218 वडग्री सेक्तियस[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 227
(ii) अवधकतम वीकीकायय कायय दबाि 17.6 वकग्रा/सेमी 2 (जी)
(iii) फीड़ िाटर दबाि 24.6
वकग्रा/सेमी 2 (जी)
(ख) िगय- II: सेिा शतों के वलए पाइपलाइन वजसमें ऊपर उक्तिक्तखत सीमाओ ों में से कोई भी
सीमा पार नही ोंकी गई है।
(2) िेल्ड के पहचान के वलए वच् पर इोंडेंटेशन के वबना िेल्डर की पहचान की मुहर लगाई
जाएगी, या प्रत्येक पूणय वकए गए िेल्ड के वनकट स्टेंवसल वकया जाएगा।
267. िगष-I पाइपलाइनो ं के वलए परीिण - (1) जहाों हाइडरोवलक दबाि के अनुप्रयोग द्वारा पूणय
पाइपलाइनो ों का परीिण नही ों वकया जाता है, िहाों िेल्ड वनम्नवलक्तखत वनरीिण प्रवहृया के अधीन
होगों े,नामतः
(क)(i) 102 वम.मी. बोर से अवधक की पाइवपोंग के वलए, सभी बट्ट-िेल्ड रेवडयोग्रावफक
या अन्य अनुमोवदत विवधयो ोंद्वारा नॉन-वडस्टरक्तरि परीिा के अधीन होगों े।
(ii) प्रत्येक िेल्डर द्वारा बनाए गए पहले पाोंच िेल्ड की पूरी पररवध की नॉन-वडस्टरक्तरि
जाोंच की जाएगी। यवद ये सोंतो जनक पाए जाते हैं और सिम व्यक्ति िेक्तल्डोंग
तकनीको,ों वनयोंिण और पययिेिण के तरीको ों से सोंतुष्ट स हैं, तो नॉन-वडस्टरक्तरि जाोंच की
सीमा में छू ट पर विचार वकया जा सकता है, लेवकन यह छू ट वकसी भी मामले में
सोंबोंवधत िेल्डर द्वारा बनाए गए प्रत्येक शे िेल्ड की सीमा के एक वतहाई से कम की
गैर- विनाशकारी जाोंच की अनुमवत नही ोंहोगी।
(ख) 102 वम.मी. बोर और इससे कम, और 38 वम.मी. तक की पाइवपोंग के वलए -
प्रत्येक िेल्डर द्वारा बनाए गए बट्ट-िेल्ड का पाोंच प्रवतशत, प्रवत िेल्डर न्यूनतम दो िेल्ड
के साथ, हृों मारवहत रूप से चयवनत, रेवडयोग्रावफक या अन्य द्वारा नॉन-वडस्टरक्तरि
परीिण के अधीन होगा, वजनको अनुमोवदत विवधयो ों या दृश्य परीिण और बेंड
परीिणो ोंके वलए काटा जा सकता है।
(ग) 38 वम.मी. से कम बोर की पाइवपोंग के वलए - सामान्य रूप से विशे परीिणो ों की
आिश्यकता नही ोंहोती है, लेवकन एक पाइपलाइन पर प्रत्येक िेल्डर द्वारा दो प्रवतशत िेल्ड
को दृश्य जाोंच और बेंड परीिण के वलए पाइप लाइन से काटा जा सकता है।
(2) जहााँ पूरी पाइपलाइन को हाइडरोवलक प्रेशर लगाकर टेस्ट वकया जाता है, िहााँ िेल्ड को
नीचे वदए गए इोंस्पेक्शन प्रोसेस से गुजारा जाएगा, नामत:-
(क) 102 वम.मी. से ज़्यादा बोर िाली पाइवपोंग के वलए, हर िेल्डर द्वारा कम से कम दो िेल्ड
िाली पाइपलाइन पर बनाए गए दस परसेंट िेल्ड को, रैंडम तरीके से चुना जाएगा, और
रेवडयोग्रावफक या दूसरे अनुमोवदत विवधयो ों से नॉन-वडस्टरक्तरि जाोंच की जाएगी।
(ख) 102 वम.मी. बोर और उससे कम, लेवकन 38 वम.मी. बोर तक की पाइवपोंग के वलए, हर
िेल्डर द्वारा बनाई गई पाइपलाइन पर वकए गए दो परसेंट िेल्ड, वजसमें हर िेल्डर के वलए कम
से कम एक िेल्ड हो, को रैंडम तरीके से चुना जाएगा, और रेवडयोग्रावफक या दूसरे अनुमोवदत228 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
विवधयो ों से नॉन-वडस्टरक्तरि जाोंच की जाएगी या दृश्य जाोंच और बेंड टेस्ट के वलए काटा जा
सकता है।
(ग) 38 वम.मी. से कम बोर की पाइवपोंग के वलए, आम तौर पर विशे परीिणो ोंकी जरूरत नही ों
होती है, लेवकन हर िेल्डर द्वारा पाइपलाइन पर वकए गए दो परसेंट िेल्ड की दृश्य जाोंच और
बेंड टेस्ट के वलए पाइपलाइन से काटा जा सकता है।
268. िगष II पाइपलाइनो ं के वलए परीिण - (1) इस िगीकरण के तहत सभी पाइपलाइनो ों का
वनमायण कायय पूरा होने पर हाइडरोवलक परीिण वकया जाएगा।
(2)(क) प्रत्येक िेल्डर द्वारा बनाए गए पहले दस उत्पादन िेल्ड के पूरा होने पर, िेल्ड में से
एक को परीिण उद्देश्यो ों के वलए काट जाएगा, या िैकक्तिक रूप से िेल्डर दो समान
लोंबाई के पाइवपोंग से बना एक ऐसा परीिण नमूना तैयार करेगा जो इस क्तस्थवत में
िेल्डेड होगा जो व्यािहाररक रूप से चयवनत उत्पादन िेल्ड का वनकटता से
प्रवतवनवधत्व कर सकें ।
(ख) परीिण के नमूने दृश्य जाोंच और बेंड जाोंच के अधीन होगों े।
(3) प्रत्येक िेल्डर द्वारा वकए गए शे िेल्डो ों में से दो प्रवतशत को यादृक्तच्छक रूप से चुना
जाएगा और परीिण के उद्देश्य से काटा जाएगा, या िैकक्तिक रूप से िेल्डर दो समान
लोंबाई के पाइवपोंग से बना एक ऐसा जाोंच नमूना तैयार करेगा जो इस क्तस्थवत में िेल्डेड
होगा जो व्यािहाररक रूप से चयवनत उत्पादन िेल्ड का वनकटता से प्रवतवनवधत्व कर
सके ।परीिण के नमूने दृश्य परीिण और बेंड़ परीिणो ोंके अधीन होगों े।
(4) उप-विवनयम (2) और (3) में कु छ भी शावमल न होने के बािजूद, बेंड परीिणो ों से छू ट
दी जाएगी, यवद िेल्डटस का वनम्न तरीके से नॉन-वडस्टरक्तरि परीिण वकया गया है:
(क) 102 वम.मी. से अवधक बोर की पाइवपोंग, प्रत्येक िेल्डर द्वारा एक पाइप लाइन
पर कम से कम दो िेल्ड प्रवत िेल्डर के साथ बनाए गए पाोंच प्रवतशत िेल्ड,
वजसका चयन यादृक्तच्छक रूप से वकया गया है रेवडयोग्रावफक या अन्य
अनुमोवदत विवधयो ोंद्वारा एक नॉन-वडस्टरक्तरि जाोंच के अधीन होगों े।
(ख) 102 वम.मी. बोर और इससे कम की पाइवपोंग, प्रत्येक िेल्डर द्वारा कम से कम
एक िेल्ड प्रवत िेल्डर के साथ पाइप लाइन पर बनाए गए िेल्ड का एक
प्रवतशत, वजसका चयन यादृक्तच्छक रूप से वकया गया है रेवडयोग्रावफक या
अन्य अनुमोवदत तकनीक द्वारा नॉन-वडस्टरक्तरि परीिणो ोंके अधीन होगों े।
269. पुन: जांच - (1) यवद कोई जाोंच नमूना असोंतो जनक है, तो पुन: जाोंच के वलए दो और िेल्ड
नमूने उत्पादन िेल्ड से चुने जाएोंगे और जो परीिण के अधीन होगों े।
(2) वकसी भी पुन: परीिण नमूने की असफलता की क्तस्थवत में, वपछले परीिणो ोंके बाद इस िेल्डर द्वारा
वकए गए उत्पादन िेल्ड विशे रूप से विचार वकए जाने के अधीन होगों े।
270. सॉके ट िेल्ड ज्वाइंट – (1) सॉके ट िेल्ड ज्वाइोंट का उपयोग काबयन और कम अलॉय स्टील
पाइप के साथ वकया जा सकता है, वजनका बाहरी व्यास 60.3 वम.मी. से अवधक न हो।ों[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 229
(2) ऐसे िेल्ड का उपयोग ऐसे स्थान हेतु नही ोंवकया जाना चावहए जहाों श्रम, गोंभीर अपिरण या गोंभीर
सोंिारण होने की सोंभािना हो।
(3) सॉके ट िेल्ड वफवटोंग का अवधकतम वीकीकायय काययशील दबाि समीकरण (7/1) (विवनयम 256)
के अनुसार वनधायररत वकया जाएगा।
(4) सॉके ट िेल्ड वफवटोंग की मोटाई पाइप की नोवमनल मोटाई के 1¼ गुना से कम नही ों होगी और
सामग्री सोंबोंवधत पाइवपोंग अनुरूप होगी।
271. बट िेल्डेड ज्वाइंट – (1) यथा लागू बट िेल्डेड ज्वाइोंट को रेवडयोग्रावफक, रेवडयोस्कोपी या
अन्य अनुमोवदत विवधयो ोंजैसे वक चरणबद् अरे अल्ट्रासोवनक परीिण, चुोंबकीय कण वनरीिण या तरल
डाई प्रिेश वनरीिण सवहत अल्ट्रासोवनक परीिण द्वारा नॉन-वडस्टरक्तरि परीिण के अधीन होगों े।
(2) जब िेल्डेड घटको ों पर रेवडयोग्राफी के स्थान पर रेवडयोस्कोवपक परीिण वकए जाने हैं, तो
वनम्नवलक्तखत अपेिाओ ोंको पूरा वकया जाएगा:
(क) वनरीिण प्रावधकारी के अनुमोदन के वलए एक वलक्तखत प्रवहृया प्रस्तुत की जाएगी
वजसमें वनम्नवलक्तखत शावमल होगों े:-
(i) सामग्री और मोटाई की सीमा;
(ii) उपकरण अहयता;
(iii) परीिण िस्तु स्कै न योजना;
(iv) रेवडयोस्कोवपक मानदोंड;
(v) इमेज प्रोसेवसोंग मानदोंड;
(vi) इमेज वडस्पले मानदोंड;
(7) इमेज सोंग्रह आिश्यकताएों;
(8) वीकीकार-अवीकीकार मानदोंड (कोड सोंदभय);
(ix) प्रदशयन मूल्ाोंकन;
(x) ऑपरेटर पहचान।
(ख) रेवडयोस्कोवपक इमेज की गुणित्ता बााने के वलए वसस्टम को एक इमेज प्रोसेसर की
सहायता देनी होगी और वसस्टम प्रदशयन गुणित्ता वनम्नवलक्तखत प्रदवशयत करेगा-
(i) 3% का एक वथन सेक्शन कोन्टरस्ट सेंवसटीविटी;
(ii) 2% का एक वथक सेक्शन कोन्टरस्ट सेंवसटीविटी;
(iii) 3 लाइन जोड़े प्रवत वम.मी.का एक विविम ररजोल्ूशन;
(iv) आईक्यूआई सेंवसटीविटी - जोड़ मोटाई का 2% जब तार आईक्यूआई का उपयोग
वकया जाना है, तब तार व्यास अि वसस्टम से कम से कम सेंवसटीविटी की धुरी के
साथ उन्मुख होना चावहए।
(ग) प्रस्तुत जोड़ के विशे भाग के साथ सह-सोंबोंध के वलए रेवडयोस्कोप को ठीक से वचव्त
वकया जाना चावहए।
(घ) रेवडयोस्कोवपक जाोंच डेटा ररकॉडय वकया जाएगा और वनरीिण प्रावधकारी, द्वारा वनवदयष्ट स
रेवडयोस्कोवपक परीिण की तारीख के बाद पयायप्त अिवध के वलए वनमायता के सोंयोंि
में िीवडयो टेप, चुोंबकीय वडस्क या ऑवप्टकल वडस्क या वकसी अन्य इलेररॉवनक भोंडारण
उपकरण पर सोंग्रहीत वकया जाएगा। कु शल रेवडयोस्कोवपक जाोंच ररकॉडय ररकॉल को
ररकॉडय धारण अिवध के दौरान वकसी भी समय उपलब्ध कराया जाएगा और परीिण
िस्तुओ ोंके वलए खोजा जा सके गा।230 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ङ) जब रेवडयोस्कोवपक परीिण के पररणामवीकरूप मरम्मत की गई हो, तो मरम्मत की
प्रभािशीलता का मूल्ाोंकन करने के वलए उसी रेवडयोस्कोवपक तकनीक का उपयोग करके
मरम्मत वकए गए िेिो ोंकी वफर से जाोंच की जाएगी।
(च) रेवडयोस्कोवपक परीिण डेटा की उवचत व्याख्या में सहायता के वलए, उपयोग की जाने
िाली तकनीक का वििरण डेटा के साथ होगा। न्यूनतम रूप में, जानकारी में अनुमोवदत
अपेवित प्रवहृया और वसस्टम प्रदशयन परीिण डेटा शावमल होगों ें।
भाग IV
टीम पाइप वफवटंग और कनेक्शन
272. रॉट बेंड - पाइप बेंड पर वकसी भी वबोंदु पर दीिार की न्यूनतम मोटाई वनम्नवलक्तखत विवधयो ों में
से वकसी एक के अनुसार वनधायररत की जाएगी, अथायतट : -
(क) (i) तैयार बेंड में वकसी भी वबोंदु पर दीिार की न्यूनतम मोटाई विवनयम 256 में वदए गए
समीकरण (7/2) या (7/4) द्वारा आिश्यक मोटाई से कम नही ोंहोगी।
(ii) बेंवडोंग के बाद न्यूनतम मोटाई आिश्यकताओ ों को सुवनवश्चत करने के वलए विवनमायण
प्रवहृया के आधार पर बेंड वथवनोंग अलाउोंस का चयन वकया जाएगा।
(iii) इस प्रकार चयवनत बेंड वथवनोंग अलाउोंस अोंवतम उत्पाद पर वकसी भी नुकसानदेह
प्रभाि के वबना पाइप पररवध के हृॉस सेक्शन के सभी वहस्सो ोंपर वकया जाना है।
(ख) एक बेंड की न्यूनतम आिश्यक मोटाई t , बेंवडोंग के बाद, अपने तैयार रूप में, समीकरण
m
(i) या (ii) के अनुसार वनधायररत की जाएगी , अथायतट: -
t = P x D
m
जब बाहरी व्यास ‘D’ गणना का
+ C [समीकरण (i)]
आधार है
2 x (f x e / I) + P
t = P x d जब आंतररक व्यास ‘d’ गणना
m
+ C [समीकरण (ii)] का आधार है
2 x (f x e/I) - P
जहाों, t = बेंड की दीिार की न्यूनतम मोटाई वम.मी. में,
m
P = अवधकतम वीकीकायय काययशील दबाि वकग्रा/सेमी² (जी) में,
D = पाइप का बाहरी व्यास वम.मी. में,
d = पाइप का आोंतररक व्यास वम.मी. में,
f = वीकीकायय स्टरैस वकग्रा / सेमी² में जैसा वक विवनयम 170 के तहत प्रदान वकया
गया है,
e = दिता कारक,
= 1.0 शीमलेस और इलेक्तररक रेवसस्टेंस िेल्डेड स्टील पाइप के वलए और
इलेक्तररक फ्यूजन िेल्डेड स्टील पाइप के वलए, अध्याय-2 की आिश्यकताओ ों[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 231
का अनुपालन करते हुए वजसमें िेल्ड पूरी तरह से रेवडयोग्राफ या अल्ट्रासोवनक
रूप से परीिण वकया जाता है,
= 0.95 अध्याय-2 की आिश्यकताओ ों का अनुपालन करने िाले इलेक्तररक
फ्यूजन िेल्डेड स्टील पाइप के वलए,
= 0.90 िेल्डेड स्टील पाइप के वलए t (पाइप की न्यूनतम मोटाई) का मान 22
वम.मी. तक वजसमें 22 वम.मी. भी शावमल,
= 0.85 िेल्डेड स्टील पाइप के वलए t (पाइप की न्यूनतम मोटाई) का मान 22
वम.मी. से अवधक और 29 वम.मी. तक वजसमें 29 वम.मी. भी शावमल,
= 0.80 िेल्डेड स्टील पाइप के वलए t (पाइप की न्यूनतम मोटाई) का मान जहाों
पाइप 29 वम.मी. से अवधक हो
C = 0.75 वम.मी.
I =[4x (R/D) - 1] {इोंटराडोस पर (बेंड के अोंदर)},
[4x (R/D) - 2]
=[4x (R/D) +1] {एक्सटराडोस पर (बेंड के बाहर)},
[4x (R/D) +2]
= 1.0 {बेंड की सेंटर लाइन की साइड िॉल पर },
जहााँ, R = पाइप बेंड की बेंड विज्या वम.मी. में (नीचे वचि देखें),
D= पाइप का बाहरी व्यास
अोंतः िहृ से बवहश्चाप की तरफ और बेंड के वसरो ों पर मोटाई का अोंतरहृवमक रूप से होनी
चावहए। ऊपर की गई गणना की न्यूनतम मोटाई आिश्यकताओ ों को तैयार बेंड के बवहश्चाप,
अोंतः िहृ और बेंड सेंटर लाइन पर पूरा वकया जाना चावहए (नीचे वचि देखें)।
बेंड के वसरो ों पर न्यूनतम मोटाई विवनयम 256 में वदए गए समीकरण (7/2) या (7/4) की
आिश्यकताओ ों से कम नही ोंहोनी चावहए। बेंवडोंग के बाद न्यूनतम मोटाई की आिश्यकताओ ों
को सुवनवश्चत करने के वलए विवनमायण प्रवहृया के आधार पर बेंड वथवनोंग अलाउोंस का चयन
वकया जाएगा।
वचि 7/1232 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
273. बट िेल्पल्डंग वफवटंग - बट-िेक्तल्डोंग वफवटोंग नीचे वदए गए वचि आकृ वत और तावलका में वदए
गए आयाम और िहन िमता के अनुरूप होनी चावहए :
वचत्र 7 / 2 : टील बट िेल्पल्डंग वफवटंग – विवनयम 273
भाग V
274. टील बट िेल्पल्डंग वफवटंग - (1) (क) पाइप से िेल्ड की हुई िाोंच, बॉस और डरेन पॉके ट
विवनयम 148 से 152 की आिश्यकताओ ोंके अनुरूप होगों े ।
(ख) िाोंच को 600 से कम के कोण पर वकसी भी मुख्य वहस्से से िेल्ड नही ोंवकया जाना चावहए ।
(2) (क) यवद एक या एक से अवधक िाोंच के टुकड़े की मोटाई मुख्य वहस्से या िाोंच की मोटाई जो
समीकरण (7/6) में दी गई है, से कम है तो बाहरी सुदृाीकरण प्रदान वकया जाएगा।
(ख) इस तरह के सुदृाीकरण 'हॉसय शू' के रूप में कई रेवडयल प्लेटो ोंया कॉलर या अन्य सुदृाीकरण
के रूप में हो सकते हैं, जो वक वनरीिण प्रावधकारी या मुख्य वनरीिक द्वारा अनुमोवदत, जैसा भी
लागू हो, िाोंच और मुख्य के बीच जोंक्शन पर या उसके आसपास लगाए जा सकते हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 233
वचत्र 7 / 2
3 (क) जहाों कोई बाहरी सुदृाीकरण प्रदान नही ों वकया जाता है िहाों मोटाई, जहाों एक से
अवधक िाोंच एक पाइप से जुड़ी होती हैं, प्रत्येक िाोंच को प्रस्तावित मेन धुरी पर लोंबित रूप
में लगाया वकया जाएगा और इन लगाए गए प्रत्येक जोड़े के बीच की दूरी को मापा
जाएगा। यवद दो िाोंचो ों के बीच इस प्रकार मापी गई दूरी उनके वछद्रो ों के योग से कम है, तो
दोनो ोंिाोंचो ोंको एक दूसरे को प्रभावित करने िाला माना जाता है; यवद यह दूरी उनके वछद्रो ों
के योग के बराबर या उससे अवधक है, तो दोनो ोंिाोंच को एक दूसरे को प्रभावित नही ोंकरने
िाला माना जाता है। आिश्यक सुदृाीकरण की गणना में, प्रत्येक िाोंच के सोंदभय में उन
सभी िाोंच को ध्यान में रखा जाना चावहए वजनसे िह प्रभावित होती है।
(ख) ऐसी िाोंच जो वकसी अन्य िाोंच से प्रभावित नही ों होने की क्तस्थवत में है, जहाों िाोंच के
टुकड़े पर कोई बाहरी सुदृढीकरण नही ों लगाया जाना है, तो िाोंच की मोटाई
समीकरण (7/6) से वनधायररत की जाएगी।
PD
t ---------------- + C समीकरण (7/6)
m =
(2 SE + P) X
जहााँ, tm = िाोंच की नोवमनल मोटाई में से वीकीकायय ऋणात्मक िहन
िमता घटा कर,
P = अवधकतम वीकीकायय काययशील दबाि,
S = उस सामग्री से सोंबोंवधत अवधकतम वीकीकायय तन्यता मान जो
देश में उनके सोंचालन वनयम से सोंबोंवधत हो।
E = विवनयम 256 में वदया गया दिता कारक
X = 1-B (1-0.7 sin y) समीकरण (7/7)
B = िाोंच के बोर का मेन बोर से अनुपात
y = िाोंच और मेन के बीच का कोण वडग्री में
D= बाहरी व्यास
C = 0.75 वम.मी.
समीकरण (7/6) से t का जो मान आया है, िह न्यूनतम मोटाई है और वकसी भी
m
प्रकार की ऋणात्मक तन्यता के वलए आगे प्रािधान वकया जाएगा।
वकसी सुदृढीकरण की आिश्यकता नही ोंहै यवद -
Y
B का मान ----------- से कम है234 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Y + 90 समीकरण (7/8)
(ग) एक या एक से अवधक अन्य िाोंचो से प्रभावित िाोंच के मामले में ( वचि 7 /6
देखें ) समीकरण (7/7)से प्रत्येक िाोंच की क्तस्थवत में X का मान अलग से वनधायररत करें।
माना वक 'X' विचाराधीन िाोंच का मान है और X , X , आवद अन्य िाोंचो के मान है।
a b
तब X = 1 - C (1 - X )
1 a
X = 1 - C (1 - X ) समीकण (7/9)
2 b
जहााँ, C एक ऐसा गुणनखोंड है वजसका मान तावलका 7/6 से लेना है।
तावलका 7/6
हृम सों. L
----------- C
d + d
1 2
(1) (2) (3)
1. 1 या अवधक 0
2. 0.9 0.10
3. 0.8 0.34
4. 0.7 0.66
5. 0.6 0.80
6. 0.5 0.90
7. 0.4 0.94
8. 0.3 0.97
9. 0.2 0.98
10. 0.1 0.99
11. 0.0 1
(L = बोरो ोंके प्रिेपणो ोंके बीच की दूरी, d और d )
1 2
रैक्तखक प्रिेप द्वारा मध्यिती मान:
यह विशे रूप से ध्यान वदया जाना चावहए वक एक िाोंच दो अलग-अलग, या कई
िाोंचो ोंका वहस्सा बन सकती है, जब इसकी मोटाई प्रत्येक बहु िाोंच के एक घटक के
रूप में इसके वलए की गई गणना की मोटाई से अवधक हो।
प्रत्येक िाोंच की मोटाई जो एक बहु िाोंच का एक घटक है, समीकरण (7/10) से
वनधायररत की जाएगी । समीकरण (7/6 ) लागू नही ोंहोगा:
Pd 1
* t = ----------------- x ----------- + C समीकरण (7/10)
m
2 (Se + P) X X . X
1 2[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 235
जहाों C = 0.75 वम.मी.
*प्रोफाइल की आकृ वत - जब तक िेल्ड को डरेस्ड फ्लश नही ोंवकया जाता है, तब तक ही बाहरी िेल्ड
सुदृाीकरण होगा, जो यवद नीचे तावलका 7/7 में वनधायररत सीमाओ ों के अोंदर हो उसको प्राथवमकता देंगें
और यह सुदृाीकरण जोड़ की कें द्र रेखा से काफी हद तक अनुरूप होगा। सुदृाीकरण का आकार
इस्तेमाल वकए गए इलेररोड या िेक्तल्डोंग तकनीक के प्रकार और िेक्तल्डोंग की क्तस्थवत के अनुसार वभन्न हो
सकता है, परन्तु सभी मामलो ोंमें शेल सपाट आकार का होना चावहए, वजससे प्रोफ़ाइल पाइप के प्रत्येक
साइड वबना वकसी वनशान या मोटाई में कमी के िेल्ड के वकनारो ों पर पाइप में सुचारू रूप से चलती
रहे।
तावलका 7/7: िेल्ड सुदृढीकरण की मात्रा
हृम सों. पाइप की मोटाई वनधायररत सीमाएों
से अवधक यहाों तक और ये न्यूनतम अवधकतम
भी शावमल
वम.मी. वम.मी. वम.मी. वम.मी.
(1) (2) (3) (4) (5)
1. - 6 1.6 5
2. 6 वम.मी. 13 1.6 5
3. 13 वम.मी. - 1.6 6
(घ) मेन्ऱ के वलए ( वचि 7/6, 7/7, 7/8 और 7/9देखें) – (i) एक या एक से अवधक िाोंच
को ले जाने िाली मुख्य की मोटाई एकल िाोंच या एकावधक िाोंच के एक घटक के वलए
वनधायररत की जाएगी वसिाय इसके वक प्रतीक 'D' और 'E' मेन पर लागू होगों े।
(ii) एक से अवधक िाोंचो ों िाले मेन की मोटाई, एकल या एकावधक, प्रत्येक िाोंच के
सोंबोंध में अलग से की गई गणना के तुलना में मेन की मोटाई सबसे अवधक होगी।
(iii) िाोंच सुदृढीकरण के वलए मेन की अवतररि मोटाई िाोंच द्वारा किर की गई लोंबाई
तक और उससे आगे की दूरी के वलए प्रत्येक तरफ िाोंच के बोर से कम नही ोंहोगी।236 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 7/3 : टील बट्ट िेल्पल्डंग रेड्यूसर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 237
*आिश्यक ओ.डी.को वनवदयष्ट स वकया जाना है।
वटप्पवणयाँ:
1. d = समान टी के मामले में रन पाइप और िाोंच का बाहरी व्यास
2. d = असमान टी के मामले में िाोंच का बाहरी व्यास
1
3. L = एोंड ऑफ रन से कें द्र की दूरी।
4. L = एोंड ऑफ िाोंच से कें द्र की दूरी।
11
वचत्र 7/4 : टील बट िेल्पल्डंग टीज़238 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वटप्पवणयाँ:
1. कै प्स अधय-दीघयिृत्ताकार आकार के होते हैं और कॉलम 3 और 5 में वनवदयष्ट स समग्र लोंबाई बनाने के
वलए सीधी लोंबाई के होते है। अधय-दीघयिृत्ताकार भाग की ऊों चाई जो बाहरी रूप से मापी जाती है, के प
के आोंतररक व्यास के एक-चौथाई से कम नही ोंहोनी चावहए।
2. लोंबाई E दीिार की मोटाई के कै प पर लागू होती है जो कॉलम 4 में वदए गए से अवधक नही ोंहोती है।
3. लोंबाई E, दीिार की मोटाई के कै प पर लागू होती है जो कॉलम 4 में दी गई मोटाई से अवधक होती है।
4. d = बाहरी व्यास वम.मी. में।
E या E = कु ल लोंबाई।
1
वचत्र 7/5[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 239
वचत्र 7 / 10 - िेल्पल्डंग नेक फ्लैंज
वचत्र 7 /6 : विवशष्ट ब्ांच के टुकडे
वचत्र 7 / 11 : बैवकं ग ररंग के साथ
उपयोग के वलए प्लेन िी
वचत्र 7 / 7: विवशष्ट ब्ांच के टुकडे
[13 वम.मी. से अवधक मोटे पाइपो ोंके वलए+
वचत्र 7/12 : बैवकं ग ररंग के साथ
वचत्र 7/8 : विवशष्ट ब्ांच के टुकडे
उपयोग के वलए डबल एंगल िी
[13वम.मी. से अवधक मोटे पाइपो ोंके वलए+
वचत्र 7 /13: बैवकं ग ररंग के साथ
उपयोग के वलए सामान्य वनवमषत यू-
वचत्र 7 / 9 : विवशष्ट ब्ांच के टुकडे नाली
सभी आयाम वम.मी. में हैं।240 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
[13वम.मी. से अवधक मोटे पाइपो ोंके वलए+
वचत्र 7 / 14 : बैवकं ग ररंग के साथ उपयोग के वचत्र 7 /18 : ऑक्सी-एवसवटलीन बेस रन के
वलए लंबित या लगभग लंबित पाइप यू-नाली साथ उपयोग के वलए सामान्य वनवमषत डबल
के वलए अनुमत िैकल्पिक प्रबन्ध एंगल िी
लोंबित या लगभग लोंबित पाइप के वलए वीकीकायय
[8 वम.मी. से अवधक मोटे पाइपो ोंके वलए+
िैकक्तिक प्रबोंध
वचत्र 7 /15 : टेपर बैवकं ग ररंग और डबल रूट
वचत्र 7 /19 : ऑक्सी-एवसवटलीन बेस रन के
रन के साथ उपयोग के वलए नाली तैयार करना
साथ उपयोग के वलए डबल एंगल िी
13 वम.मी. और इससें पतले पाइपो ोंके वलए
वचत्र 7 /16 : ररसेड बैवकं ग ररंग के साथ सामान्य प्रबोंध
उपयोग के वलए ग्रूि वचत्र 7 /20 : ऑक्सी-एवसवटलीन बेस रन के
साथ उपयोग के वलए यू- ग्रूि
13 वम.मी. से अवधक मोटे पाइपो ोंके वलए बोर के
साथ लगभग फ्लश करें।
वचत्र 7 / 17 : ररसेड बैवकं ग ररंग िाले
लोंबित या लगभग लोंबित पाइप के वलए वीकीकायय
उपयोगकताष के वलए ग्रूि
िैकक्तिक तैयारी
वचत्र 7 / 21 : ऑक्सी-एवसवटलीन बेस रन के[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 241
साथ उपयोग के वलए यू- ग्रूि
सभी आयाम वम.मी. में हैं।
विशे िेक्तल्डोंग तकनीक के साथ प्रयोग के वलए
[10 से 16 वम.मी. मोटी पाइप वजसमें 16 वम.मी. भी वचत्र 7 / 24 : बैवकं ग ररंग के वबना उपयोग
शावमल है+ के वलए प्लेन िी
वचत्र 7 / 22 : ऑक्सी-एवसवटलीन बेस रन के
साथ उपयोग के वलए प्लेन िी सामान्य प्रबोंध
वचत्र 7 /23 : बैवकं ग ररंग के वबना उपयोग के
वचत्र 7 / 25 : बैवकं ग ररंग के वबना उपयोग
वलए प्लेन िी
के वलए वसंगल यू
सभी आयाम वम.मी. में हैं।242 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 7 / 26 वचत्र 7 / 27
सभी आयाम वम.मी. में हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 243
वचत्र7 / 30
वचत्र 7 / 28
वचत्र 7 / 31
वचत्र 7 / 29
सभी आयाम वम.मी. में हैं।244 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 7 / 32 : फ्लैंज बोर और पाइप के ओडी के बीच वनकासी के वलए *विवनयम 263(2)देखें +
वचत्र 7 / 33 : फ्लैंज बोर और पाइप के ओडी
के बीच वनकासी के वलए [विवनयम 263(2) आयाम X न्यूनतम 28 वम.मी.(नोवमनल पाइप
देखें+ की दीिार की मोटाई) या फ्लैंज बब की मोटाई,
जो भी छोटा हो।
वचत्र 7 / 34 : सॉके ट िेल्डेड फ्लैंज
सभी आयाम वम.मी. में हैं।
275. ब्लो-डाउन पाइप्स - (1) ब्लो-डाउन पाइप वजन्हें पूणय बॉयलर दबाि के तहत काम में
वलया जा सकता है, उन्हें उस दबाि पर सोंतृप्त भाप-पाइप माना जाएगा।
(2) ब्लो-डाउन पाइप जो पूणय बॉयलर दबाि के तहत काम में नही ों वलया जा सकता है,
उन्हें बॉयलर के आधे वडजाइन दबाि पर सोंतृप्त भाप-पाइप माना जाएगा ।
276. िाल्व चेट (1) स्टॉप-िाल्व, आइसोलेवटोंग िाल्व, ररडूवसोंग िाल्व, स्टीम टरैप, आवद के चेस्ट,
रॉट स्टील के मेन स्टीम पाइवपोंग के वहस्से के रूप में तैयार वकये जा सकते हैं, जब सोंतृप्त भाप के
साथ 11वकग्रा/ सेमी 2 (जी) के गेज दबाि या 204 वडग्री सेक्तियस के तापमान पर विवनयम 191 की
आिश्यकताओ ोंके अनुसार कास्ट आइरन, कास्ट स्टील या रॉट स्टील से बनाये गये हो ।
(2) जब 204 वडग्री सेक्तियस से ऊपर सुपरहीटेड स्टीम का उपयोग वकया जाता है या जब
दबाि 11 वकग्रा/सेमी २ गेज से ऊपर होता है, तो ऐसे चेस्ट विवनयम 191 की आिश्यकता के
अनुसार कास्ट या रॉट स्टील या अन्य अनुमोवदत सामग्री से बनाये जायेंगे।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 245
भाग- VI
277. टीम ररसीिसष, सेपरेटसष, कै च िाटसष, एक्यूमुलेटसष और इसी प्रकार के िेसल के वनमाषण
की सामग्री - (1) प्लेट, बार और सेक्शन जो स्टीम ररसीिर, सेपरेटसय, कै च िाटर, एक्यूमुलेटर और
इसी तरह के िेसि के वनमायण में काम में ली जाती है उनकी सामग्री अध्याय- 2 और 4 के प्रासोंवगक
विवनयमो ोंकी अपेिाओ ों के पूणयत: अनुरूप होगी, जो वनमायण के तरीके पर भी वनभयर करता है।
(2) िाोंच, बोस और डरेन पॉके ट ठोस फोर्ज्य हो सकती हैं, जो फ्यूजन िेक्तल्डोंग, ठोस बारो ोंसे
मशीनीकृ त या ट्यूबो ोंके द्वारा वनवमयत की जा सकती हैं।
(3) फ्लैंवजज के वलए सामग्री विवनयम 258 के उपयुि प्रािधानो ोंके अनुरूप होगी।
(4) फोवजिंग, विवनयम 58 से 62 की आिश्यकताओ ों के अनुरूप होगी।
(5) शेल या शेल के दबाि िाले भागो ों के वलए स्टील काक्तस्टोंग विवनयम 51 से 57 के
अनुरूप होगी।
278. वनमाषण और कारीगरी - (1) शेल एोंड वजनको शेल से अलग बनाया गया है, को वडश या
फ्लैट वकया जा सकता है या शेल एोंड को फोर्ज्य डाउन वकया जा सकता है और मैनहोल डोर या प्लग
या िाोंच द्वारा िेल्ड करके बोंद वकया जा सकता है।
(2) (क) (i) प्रत्येक वडश एोंड को एक रोल्ड की हुई प्लेट से बनाया जाएगा।
(ii) यवद यह अवधक व्यास के कारण अव्यािहाररक है, तो वडश एोंड प्लेट को दो प्लेट फ्यूजन
बट से एक साथ िेल्ड वकया जा सकता है और ऐसे मामलो ों में िेल्ड की लाइन िेशि के
होरीजॉन्टल एक्तक्सस के समानाोंतर होगी और वनमायण के बाद िेल्ड की रेवडयोग्राफी की
जाएगी।
(iii) वडश एोंड शेल का आकार विवनयम 174 की आिश्यकताओ ोंके अनुरूप होना चावहए।
(iv) वडवशोंग एोंड पेरीफे रल फ्लैंजेज मशीन द्वारा की जाएगी।
(v) कोल्ड फ्लैंजेज को नही ोंअपनाया जाएगा।
(vi) सभी प्लेटें वजन्हें वडश, फ्लैंग्ड या लोकल हीट वकया गया है, बाद में आोंतररक स्टरेस से राहत
के उद्देश्य से कु शलतापूियक हीट टरीटीड वकया जाएगा, जब तक वक वनमायण के अोंवतम चरण के
दौरान, उन्हें एक समान रूप से एक उपयुि तापमान पर हीट नही ोंवकया गया हो।
(vii) इस बात पर ध्यान वदया जाना चावहए वक फ्लैंवजज अच्छी सतह के हो,ों बेलनाकार हो ोंऔर
स्थानीय अवनयवमतताओ ों से मुि हो।ों
(ख) जहाों कनेक्शनो ों को जोड़ने के वलए फ्लैटो ों को वडश एोंड पर दबाया जाता है, िे फ्लैट
और घुमािदार सतहो ों के जोंक्शनो ों पर पयायप्त विज्या के साथ बने होगों े और नुकीले कोनो ों और
उपकरण के वनशानो ोंसे मुि होगों े।246 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ग) वनम्नवलक्तखत विवधयो ों में से वकसी एक द्वारा वडश एोंड को शेल के बेलनाकार भाग से जोड़ा
जाएगा:
(i) एक या दोहरे यू या िी प्रकार के बट्ट जोड़ो ों के साथ िेक्तल्डोंग; जहाों खोल का आोंतररक
व्यास 610 वम.मी. या इससे अवधक है, ऐसे सभी मामलो ों में, जोड़ो को प्लेट के दोनो ों
ओर से िेल्ड वकया जायेगा।
(ii) जहाों खोल का आोंतररक व्यास 610 वम.मी. से कम है, जोड़ो ों को के िल एक तरफ से
िेल्ड वकया जा सकता है, जब अोंदर से प्रभािी िेक्तल्डोंग को अव्यिहाररक माना जाता
है।
(ii) अनफायडय बॉयलरो ों के वनमायण में जब वडश के वसरे हीवटोंग सतह का भाग नही ोंहोते
हैं, तो आईएस:2825 के अनुरूप कोल्ड स्पन वडश एोंड का उपयोग वकया जा सकता
है।
(3) (क) फ्लैट एोंडटस फोजय स्टील या प्लेट स्टील के होगों े और शेल के बेलनाकार वहस्से में िेल्ड
वकए जाएोंगे या फ्लैंज से बोल्ट् वकए जाएोंगे जो वक विवनयम 263 के अनुसार शेल के बेलनाकार
वहस्से से जुड़े होगों े ।
(ख) फ्लैट एोंड को जोड़ने का तरीका वचि 7 /35, 7 /36, 7 /37 और 7 /38 में वदखाए गए
तरीको ोंमें से वकसी एक द्वारा वकया जाएगा।
(ग) जब वचि 7/38 में दशायए अनुसार वसरो ोंको जोड़ा जाता है, तो िेक्तल्डोंग जहाों व्यािहाररक
हो, शेल प्लेट के दोनो ोंओर से होनी चावहए। जहाों भी िेक्तल्डोंग के िल एक तरफ से की जाती
है, िहाों बैवकों ग क्तस्टरप्स का उपयोग करके पूरी पैठ सुवनवश्चत करने का ध्यान रखा जाएगा।
वचत्र 7 / 35
वचत्र 7 / 37[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 247
वचत्र 7 /36
वचत्र 7 /38
सभी आयाम वम.मी. में हैं।
वचत्र 7 /39
279. शेल तक पहुंच – (1) पूरी तरह से सफाई और वनरीिण के वलए पहुोंच की अनुमवत देने के
वलए कम से कम एक मैनहोल वदया जाएगा, वसिाय इसके वक जहाों प्रिेश की अनुमवत देने के वलए शेल
बहुत छोटा है, पयायप्त आकार और सोंख्या में सफाई और वनरीिण करने के वलए उपलब्ध कराये
जाएोंगे।
(2) जब शेल के बेलनाकार भाग में एक अण्डाकार मुोंह होता है, तो लघु अि शेल, जहााँ कही ों भी
व्यािहाररक हो, शेल के अनुदैध्यय अि के समानाोंतर होता है।
280. ओपवनंग और दरिाजो ं के वलए कम्पनसेवटंग ररंग - कम्पनसेवटोंग ररोंग और दरिाजो ों की
सामग्री, वनमायण और कारीगरी सोंगत विवनयमो ों के अध्याय 2, 3 और 12 के अनुरूप
होगी।
281. ब्ांचेज और अन्य कनेक्शन – (1) (क) शेल के कनेक्शन िाोंचो,ों प्रेस्ड की गई प्लेट सैडि,
फोजय पैड या बॉसेस के माध्यम से वकए जाएोंगे या, जहाों शेल की मोटाई उपयुि सतह प्राप्त करने की
अनुमवत देने के वलए पयायप्त है, कनेक्शन सीधे शेल से जोड़े जा सकते हैं, बशते वक शेल में छेद पर
न्यूनतम मोटाई अवधकतम वीकीकायय काययदबाि और तापमान के वलए आिश्यक मोटाई से कम न हो,
शेल को वबना छेद िाला मानते हुए और यह वक छेद का व्यास विवनयम 141 और 179 में पररभाव त
एक अकम्पनसेटेड छेद के अवधकतम व्यास से अवधक नही ोंहै।
(ख) इस तरह के कनेक्शन को सुरवित करने के वलए स्टड में कम से कम एक व्यास की लोंबाई के
वलए शेल में फु ल थ्रेड होक्तल्डोंग होनी चावहए और स्टड छेद शेल की पूरी मोटाई में प्रिेश नही ों करना
चावहए।
(ग) िाोंच, सैडि और फोजय पैड में बोल्ट् और स्टड के वलए सभी छेद वडरल से वकए जाने चावहए।
(घ) सील िेल्ड को छोड़कर, जहाों ऐसे कनेक्शन अके ले िेक्तल्डोंग द्वारा सुरवित वकए जाते हैं, िहाों प्रत्येक
िेल्ड पर धातु की कम से कम दो परत की जानी चावहए।248 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ड़) अगली सतह लगाने से पहले िेल्ड धातु के प्रत्येक सतह को अच्छी तरह से साफ वकया जाना
चावहए और यह लैग से मुि होना चावहए।
(च) िेल्ड का अोंवतम वफवनश ऐसा होना चावहए वक शेल से िाोंच में सेक्शन का पररितयन हृवमक और
तेज कटाि से मुि हो।
(छ) जहाों शेल का व्यास 610 वम.मी. या इससे अवधक हो, िहाों िेक्तल्डोंग प्लेट के दोनो ों ओर से होनी
चावहए।
(ज) जहाों शेल का आोंतररक व्यास 610 वम.मी. से कम हो, बाहरी और आोंतररक िेल्ड तब तक लगाया
जाएगा जब तक यह नही ोंमाना जाता है वक दोनो ोंतरफ से कु शल िेक्तल्डोंग अव्यािहाररक है।
(झ) यह वचि 7/40 और 7/41 में वदखाए गए अनुलग्नक के तरीको ोंपर लागू नही ोंहोता है वजसमें िेक्तल्डोंग
हमेशा दोनो ोंतरफ से होती है।
वचत्र 7 / 40[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 249
वचत्र 7 / 43
वचि 7 /42 और 7/43 में वदखाए गए प्रकार
के वलए िेक्तल्डोंग प्रवहृया डबल िेल्डेड बट जोड़ो
के वलए होगी। पहले बाहरी िेल्ड को बनाया
जाएगा। बाहरी िेल्ड का वपछला भाग वनकाल
वदया जायेगा। इनर िेल्ड की शुरूआत से
पहले डीप पेनेटरेशन िेक्तल्डोंग का उपयोग
वनमायता द्वारा वकए जा रहे आिश्यक पेनेटरेशन
के प्रमाण के रूप में, वनरीिण प्रावधकारी द्वारा
माोंगने पर वकया जा सकता है।
नोट: उपरोि िाोंच लोंबाई की वसफाररश नही ों की
जाती है और िाोंच को यथासोंभि छोटा होना चावहए।
वचत्र 7 / 41
सभी आयाम वम.मी. में हैं।
वचत्र 7 / 44
वचत्र 7 / 45
वचत्र 7 / 42250 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचि 7 /49 में दशाययें गये प्रकार की अनुमवत
वचत्र 7 / 46
नही ोंहै, जहाों शेल की मोटाई 25.4 वम.मी. से
अवधक हो।
वचत्र 7 / 49
वचि 7 /47 में दशायए गए प्रकार की के िल तभी
अनुमवत दी जाती है, जब उपयोग वकए जाने िाले
इलेररोड और तकनीक को अलग से तैयार परीिण
नमूनो ों द्वारा दशायया गया हो, तावक ध्ववन िेल्ड धातु
के साथ पूरी तरह से पेनेटरेशन वकया जा सके । जहाों वचत्र 7 / 50
िाोंच का बोर 127 वम.मी. से अवधक है, िहाों इनकी
अनुमवत नही ोंहै।
वचत्र 7 / 47
सभी आयाम वम.मी. में हैं।
वचत्र 7 / 51
वचि 7 /48 में दशायये गये प्रकार की अनुमवत नही ोंहै
जहाों िेसल के अोंदर िेक्तल्डोंग योग्य पहुोंच है। वचि को
िहाों प्राथवमकता दी जाती है जहाों िाोंच के अोंदर
िेक्तल्डोंग योग्य पहुोंच है, जहाों यह शेल से जुड़ता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 251
वचत्र 7 / 48
वचत्र 7 / 52 वचत्र 7 / 56
वचि 7 /52 और 7 /53 में दशायए गए प्रकारो ों के
वलए िेक्तल्डोंग प्रवहृया डबल िेल्डेड बट जॉइोंट के
वलए है। पहले बाहरी िेल्ड बनाई जानी चावहए। इनर
िेल्ड की शुरूआत से पहले डीप बाहरी िेल्ड का
वपछला भाग वनकाल वदया जायेगा। पेनेटरेशन
िेक्तल्डोंग का उपयोग वनमायता द्वारा वकए जा रहे
वचत्र 7 / 57
आिश्यक पेनेटरेशन के प्रमाण के रूप में, वनरीिण
प्रावधकारी द्वारा माोंगने पर वकया जा सकता है।
वचत्र 7 / 53
सभी आयाम वम.मी. में हैं।
वचत्र 7 / 58
वचत्र 7 / 54252 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र7 / 55 वचत्र 7 / 59
वचि 7 /60 में दशायये गये प्रकार की अनुमवत नही ोंहै
जहाों िेसल के अोंदर िेक्तल्डोंग योग्य पहुोंच है। वचि
7/60 को िहाों प्राथवमकता दी जाती है जहाों िाोंच के
अोंदर िेक्तल्डोंग योग्य पहुोंच है, जहाों यह शेल से जुड़ता वचत्र 7 / 63
है।
वचत्र 7 / 60
सभी आयाम वम.मी. में हैं।
वचत्र 7 / 64
वचि 7 /61 में दशायए गये प्रकार की अनुमवत नही
है जहाों शेल की मोटाई 25.4 वम.मी. से अवधक हो ।
वचत्र 7 / 61[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 253
38.1 वम.मी.के मानक पाइप आकार से अवधक
वचि 7 /62 में दशायए गये प्रकार की िहाों अनुमवत
के टैप बोसेज की अनुमवत नही ोंहै।
नही ोंहै, जहाों वनम्नवलक्तखत में से कोई भी अवधक हो,
शेल मोटाई 19 वम.मी., अवधकतम वीकीकायय कायय
वचत्र 7 / 65
दबाि 7.4 वकग्रा / सेमी 2 (जी) वडजाइन तापमान
171 वडग्री सेक्तियस
वचत्र 7 / 62
वचि 7 / 66 में दशायए गए प्रकार की िहाों वचि 7 /70 में दशायए गए प्रकार की िहाों
अनुमवत नही ोंहै जहाों िेक्तल्डोंग के वलए शेल के अोंदर अनुमवत नही ों है जहाों शेल की मोटाई 19
पहुोंच योग्य है। वम.मी.से अवधक हो।
वचत्र 7 / 66 वचत्र 7 / 70
वचत्र 7 / 67
सभी आयाम वम.मी. में हैं। आयाम बी कनेक्शन के नाममाि बोर से बड़ा
हो सकता है लेवकन इससे अवधक बड़ा नही ों
होना चावहए: वपच सकय ल व्यास माइनस (स्टड
व्यास + 12.7 वम.मी.)। वचि 7 /71 में दशायए
गए प्रकारो ों के वलए िेक्तल्डोंग प्रवहृया डबल
िेल्डेड बट जॉइोंट की बाहरी िेल्ड बनी होनी
वचि 7 /68 में दशायए गये प्रकार की के िल तभी
चावहए, पहले बाहरी िेल्ड को बनाया
अनुमवत दी जाती है जब शेल के अोंदर िेक्तल्डोंग के
जाएगा। बाहरी िेल्ड का वपछला भाग वनकाल
वलए पहुोंच योग्य न हो
वदया जायेगा। इनर िेल्ड की शुरूआत से
वचत्र 7 / 68
पहले डीप पेनेटरेशन िेक्तल्डोंग का उपयोग254 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वनमायता द्वारा वकए जा रहे आिश्यक पेनेटरेशन
वचि 7 /68 और 7 /69 में दशायए गए प्रकार की के प्रमाण के रूप में, वनरीिण प्रावधकारी द्वारा
अनुमवत नही ों है जहाों वनम्नवलक्तखत में से कोई भी माोंगने पर वकया जा सकता है।
सीमा पार हो गई हो: शेल की मोटाई 19 वचत्र 7 / 71
वम.मी.; अवधकतम वीकीकायय कायय दबाि 10.6
वकग्रा/सेमी 2 (जी) ; वडजाइन तापमान 260 वडग्री
सेक्तियस; 38.1 वम.मी. मानक पाइप आकार से
अवधक टैप वकए गए बोस
वचत्र 7 / 72
वचत्र 7 / 69 : अंवतम सीलिेल्ड
वचि 7 /73 में दशायए गए प्रकार की
अनुमवत नही ों है जहाों िेक्तल्डोंग के वलए शेल के
अोंदर पहुोंच योग्य है
वचत्र 7 / 73
वचत्र 7 / 74
आयाम बी कनेक्शन के नोवमनल बोर से बड़ा हो
आयाम 'बी' कनेक्शन के नोवमनल बोर से बड़ा
सकता है लेवकन इससे अवधक नही ों होना चावहए:
हो सकता है लेवकन इससे अवधक नही ों होना
वपच सकय ल व्यास माइनस (स्टड व्यास + 12.7
चावहए: वपच सकय ल व्यास माइनस (स्टड व्यास
वम.मी.) वचि 7 /72, 7 /73 और 7 /74 में दशायए गए
+ 12.7 वम.मी.) वचि 7 /75 और 7 /76 में
प्रकार की अनुमवत नही ोंहै जहाों शेल की मोटाई 19
दशायए गए प्रकार की अनुमवत नही ों है जहाों
वम.मी. से अवधक हो।
शेल की मोटाई 19 वम.मी. से अवधक है।
वचत्र 7 / 76
सभी आयाम वम.मी. में हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 255
वचि 7 /75 में दशायए गए प्रकार की अनुमवत नही है जब खोल के अोंदर िेक्तल्डोंग के वलए पहुोंच योग्य
हो।
वचत्र 7 / 75
सभी आयाम वम.मी. में हैं।
(2)(क) 38 वम.मी. से ज्यादा नोवमनल बोर न होने िाली िाोंचो ों को एक टेपर थ्रेड और सील िेल्डेड के
साथ शेल में स्क्रू वकया जा सकता है, बशते वक शेल की मोटाई िाोंच के व्यास के बराबर थ्रेड की लोंबाई
की अनुमत पयायप्त हो।
(ख) जहाों शेल की मोटाई इस उद्देश्य के वलए पयायप्त नही ोंहै, िहाों एक बॉस को िेल्ड वकया जा सकता
है तावक बॉस और शेल की कु ल मोटाई कम से कम थ्रेड की आिश्यक लोंबाई के बराबर हो।
(ग) ऐसे बोसेज को जोड़ने के तरीके वचि 7 /65 से 7 /69 में दशायए गए हैं ।
(3) (क) िाोंचो,ों प्रेस्ड प्लेट सैडि, बोसेज के फोजय पैड वनम्न विवधयो ों में से एक द्वारा शेल
में सुरवित वकए जाएोंगे :
(i) िेक्तल्डोंग;
(ii) स्क्रू इोंग और सील िेक्तल्डोंग।
(ख) (i) िेक्तल्डोंग द्वारा सुरवित जोड़ने के तरीके वचि 7/40 से 7/64 में दशायए गये हैं।
(ii) सामान्य बोल्ट् िाले जोड़ के वलए फ्लैंवजज के साथ िाोंचेज उपलब्ध होगी। विशे प्रकार के
जोड़ो ोंका भी उपयोग वकया जा सकता है।
(iii) सामान्य बोल्ट् िाले जोड़ो ों के वलए फ्लैंवजज पररवशष्ट स-च में उपयुि तावलका के अनुसार
होना चावहए और िाोंचो ोंके साथ फोजयड सोवलड होना चावहए या विवनयम 263 के अनुसार जुडे
होने चावहए।
(iv) उन्हें जोड़ने िाली और बोल्ट् धाररत सतहो ोंपर मशीनीकृ त वकया जाएगा।
(ग) (i)जहाों प्रेस्ड प्लेट सैडि का उपयोग वकया जाता है, उन्हें शेल के वनकट बनाया जाना चावहए
और कनेक्शन को जोड़ने िाले वसरो ों तथा मशीन या वकनारो ों पर मशीन द्वारा फ्लेम कट पर
मशीनीकृ त वकया जाएगा।
(ii) कनेक्शन के जोड़ के वलए स्टड , यवद स्क्रू के माध्यम से सेडल वकये जाते हैं, तो अोंदर की
तरफ प्रत्येक एक नट के साथ वफट वकया जाएगा।256 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iii) जहाों स्टड के छेद सेडल के आर-पार प्रिेश नही ोंकरते हैं, प्लेट में स्टड के स्क्रू िाले वहस्से
की लोंबाई स्टड के व्यास से कम नही ोंहोनी चावहए।
(घ) सभी पैडटस के जॉइन फे स को मशीनीकृ त वकया जाएगा।
(ङ) (i)पैड पयायप्त रूप से मोटे होने चावहए तावक आोंतररक सतह को छेदे वबना कनेक्शन
के वलए स्टड होल की वडरवलोंग की जा सके ।
(ii) पैड में स्टड के स्क्रू िाले भाग की लोंबाई स्टड के व्यास से कम नही ोंहोनी चावहए।
(iv) िेक्तल्डोंग द्वारा सुरवित वकए गए पैड को लगाने की विवध इस अध्याय के वचि 7 /70
से 7 /76 में दशाययी गई है, लेवकन जहाों वचि 7 /70 में दशायए गए प्रकार के पैड
का उपयोग वकया जाता है, उन्हें शेल के वनकट बनाया जाएगा।
(च) (i) 38 वम.मी. से कम िाले मानक पाइप को शेल में िेल्डेड मानक पाइप के टैप वकए
गए बॉस को अवधकतम वीकीकायय कायय दबाि के वलए इस्तेमाल वकया जा सकता है जो 14
वकग्रा/सेमी2 (जी) से अवधक नही ोंहै और वनधायररत तापमान 343 वडग्री सेक्तियस से अवधक नही ों
है।
(ii) ऐसे बोसो ोंमें टेपर थ्रैड होगों े।
(iii)िेक्तल्डोंग द्वारा सुरवित बोसो ोंको जोड़ने के तरीके इस अध्याय के वचि 7/65, 7/69 में दशायए
गए हैं।
(छ) (i)फ्लैंवजज कनेक्शन के अलािा सभी िेल्डेड जोड़ मेटल आकय प्रवहृया द्वारा होगों े और
उपयोग वकए गए इलेररोड विवनयम 71 से 76 की आिश्यकताओ ोंके अनुरूप होगों े।
(ii) जहाों टैक िेल्डटस का उपयोग वकया जाता है, िे मजबूत होगों े और जब तक वक कट आउट
नही ोंहो जाते, तब तक उन्हें सािधानी से मुख्य रनो ोंमें जोड़ वदया जाएगा।
(ज) िेक्तल्डोंग द्वारा सुरवित सभी भागो ों की सभी िेक्तल्डोंग के पूरा होने के बाद और
हाइडरोवलक परीिण से पहले प्रभािी ढोंग से ताप वहृया की जाएगी।
282. शेल जोड - (1)फ्यूजन िेल्डेड शेल को वनम्नानुसार िगीकृ त वकया जाएगा:
(क) िगय I –स्कैं टवलोंग की कोई सीमा नही।ों
(ख) िगय II - जब वनम्न में से कोई भी सीमा पार नही ोंकी जाती है -
(i) अवधकतम वीकीकायय काययशील दबाि 35 वकग्रा/सेमी 2 (जी)
(ii) अवधकतम वीकीकायय कायय दबाि और आोंतररक व्यास, का गुणनफल सेमी में -
3750
(iii) वडजाइन तापमान - 343 वडग्री सेक्तियस।
(ग) िगय III- जब वनम्नवलक्तखत में से कोई भी सीमा पार नही ोंकी जाती है -
(i) अवधकतम वीकीकायय कायय दबाि -7.4 वकग्रा/सेमी 2 (जी)
(ii) अवधकतम वीकीकायय कायय दबाि और आोंतररक व्यास, का गुणनफल सेमी में -
940
(iii) वडजाइन तापमान - 171 वडग्री सेक्तियस।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 257
(2) फ्यूजन िेल्ड, सीम की तैयारी, बेंवडोंग के बाद ताप प्रवहृया सवहत बेलनाकार शेल के
वनमायण की विवध, िेल्डेड सीम बनाने की विवध, िेल्डेड जोड़ो ोंके प्रकार, परीिण प्लेटें और शेल
का घेरा, वनम्नवलक्तखत के अलािा अध्याय -4 की आिश्यकताओ ोंके अनुरूप होगा , अथायतट-
(क)(i) जब भी सोंभि हो, प्लेट के दोनो ों ओर की सीम को िेल्ड वकया जाना चावहए।
प्लेट की मोटाई से 10 प्रवतशत अवधक मोटाई के वनमायण के वलए िेल्डेड सीम की
दोनो ोंसतहो ोंपर धातु के अवतररि सतह लगाए जाने चावहए।
(ii)िेल्ड की सतह जहाों कही ों भी दोनो ों तरफ से िेल्ड की जाती है िह सतह सपाट
होनी चावहए और प्लेटो ोंकी सोंबोंवधत सतहो ोंके साथ फ्लश होनी चावहए।
(iii)जहाों तह को के िल एक तरफ से िेल्ड वकया जाता है, ये प्रािधान सतह के िेल्ड
के अनािृत होने पर लागू होगों े।
(ख) िगय-I फ्यूजन िेल्डेड सीम्स के वलए परीिण अध्याय -4 के प्रासोंवगक विवनयमो ों
की आिश्यकताओ ों के अनुरूप होगों े ।
(ग) िगय- II के फ्यूजन िेल्डेड सीम्स के वलए परीिण अध्याय - 12 की
आिश्यकताओ ों के अनुरूप होगों े , वसिाय इसके वक एक माइहृो और मैहृो परीिण
के वलए एक अवतररि प्रािधान वकया जाएगा।
(घ) िगय- III फ्यूजन िेल्डेड सीम्स के वलए परीिण अध्याय - 12 की आिश्यकताओ ों
का अनुपालन करेंगे ।
(ङ) जब दीिार की मोटाई 20 वम.मी. से अवधक हो या काबयन सामग्री 0.25% से
अवधक हो या पाइप अलॉय स्टील से बने हो,ों तो िगय-I और िगय-II के शेल ताप प्रवहृया
द्वारा प्रभािी रूप से दबाि मुि होगों े।
283. अवधकतम स्वीकायष कायष दबाि का वनधाषरण – (1) (क) शेल का अवधकतम वीकीकायय कायय
दबाि वनम्नवलक्तखत सूि द्वारा वनधायररत वकया जाएगा:-
2f E (T – 0.75)
P = -------------------
D + (T – 0.75)
जहाों,
T वम.मी. में मोटाई,
D वम.मी. में अवधकतम आोंतररक व्यास,
P अवधकतम वीकीकायय काययशील दबाि वकग्रा/सेमी 2 (जी) में,
f काययशील धातु तापमान पर वकग्रा/सेमी 2 में अवधकतम वीकीकायय कायय स्टरेस है
जैसा वक विवनयम 170 या 256 जो भी लागू हो, में वनधायररत वकया गया है
E नीचे दी गई तावलका में वदए गए फ्यूजन िेल्डेड शेल के वलए दिता कारक है,
जोड़ रवहत शेल वबना जोड़ की ट्यूबो ोंसे बने शेल के वलए 1.00,258 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
एक अोंश के रूप में व्यि शेल में वछद्रो ोंया ओपवनोंग के बीच जोड़ो की िमता
है।
0.75 कोरोजन को ध्यान में रखते हुए अवतररि मोटाई है
तावलका 7/8
हृम सं. िगष दिता कारक (E)
(1) (2) (3)
1. I 0.90
2. II 0.75 अगर दोनो ोंतरफ से िेल्ड वकया गया है
0.50 अगर दोनो ोंतरफ से िेल्ड वकया गया है
3. III 0.45
तावलका 7/9: शेल की न्यूनतम मोटाई
हृम सों. िगीकरण आोंतररक व्यास न्यूनतम मोटाई
वम.मी. में वम.मी. में
(1) (2) (3) (4)
1. फ्यूजन िेल्डेड क्लास I 6.3
2. फ्यूजन िेल्डेड क्लास II और 610 सवहत 610 6.3
क्लास III, तक
3. फ्यूजन िेल्डेड शेल के 610 से अवधक 8
अलािा अन्य शेल और 914 सवहत
914 तक
4. शेल 914 से अवधक 9.5
(ख) जहाों स्टील 371 वडग्री सेक्तियस से अवधक तापमान पर कायय के वलए अवभप्रेत वकया
गया हैं, ऐसा कहा जाएगा और वसवलकॉन सामग्री 0.10 प्रवतशत से कम नही ोंहोगी या िैकक्तिक
रूप से, सामग्री को ‚बॉयलर की काबयन स्टील प्लेट की हृीप िावलटी‛ का प्रूफ टेस्ट पास
करना होगा जैसा वक पररवशष्ट स - ड़ में है।
(ग) शैि में ओपवनोंग कों पोंसेशन के वलए, जहाों शेल के बेलनाकार भाग में काटे गए वकसी
भी होल के व्यास की प्रमुख धुरी शेल प्लेट की मोटाई के 2½ गुना और 70 वम.मी. अवधक हो,
कों पोंसेशन वकया जायेगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 259
(घ) शेल के लम्बित एक्तक्सस के समानाोंतर में मापे गये वजस िेिगत एररया का कों पोंसेशन
वकया जाना है, जो इस िेि को अवधकतम बनाता है, उसकी गणना
समीकरण ( 4/2) (विवनयम 169 ) के साथ उसी दबाि और तापमान की क्तस्थवतयो ों पर की
जायेगी जोवक समान सामग्री की ओपवनोंग की लोंबाई और सीमलेस शेल का गुणनफल होगा।
(ङ) जहाों फ्रे म, पैड या िाोंचो ों को िेक्तल्डोंग द्वारा सुरवित वकया जाता है, कों पोंसेवटोंग िेि की
गणना विवनयम 141 में दी गई विवध के अनुसार की जाएगी ।
(2)(क) 'अितल फलक पर दबाि' के साथ अवधकतम वीकीकायय कायय दबाि या वडश एोंड प्लेटटस को
विवनयम 175 से 177 द्वारा वनधायररत वकया जाएगा ।
(ख) वचि 7/77 के अनुसार प्रेस्ड़ फ्रे मो ों पर वडश वकए गए एोंड प्लेटो ों पर िेक्तल्डोंग
द्वारा बनाए गए मैनहोल के वलए, ‘ ’ का मान इकाई के रूप में वलया जा सकता है जब
कों पोंसेवटोंग फ्रे म के व्यासीय हृॉस-सेक्शनज िेि और या ररोंग एोंड प्लेट में ओपवनोंग के व्यास के
हृॉस-सेक्शनज िेि के बराबर या उससे अवधक है, को कों पोंसेट वकया जायेगा। एोंड के वलए जो
शेल के बेलनाकार भागो ोंमें बट िेल्डेड होते हैं, शेल के बेलनाकार भाग से जोड़ने के वलए फ्लैंज
के वकनारे की मोटाई विवनयम 169 में उक्तिक्तखत समीकरण (4/2) द्वारा वनधायररत सीमलेस
अनवपयस्डय शेल के वलए आिश्यक मोटाई से कम नही ोंहोनी चावहए।
वचत्र 7 / 77 : वडश्ड एंड प्लेट में िेल्ड वकया गया दीघषिृताकार मैनहोल फ़्रे म
(3) (क) फ्लैट एोंड प्लेटटस में िेल्ड के वलए अवधकतम वीकीकायय काययकारी दबाि, जैसा वक वचि
7/35, 7/37 और 7/38 में दशायया गया है, वनम्नवलक्तखत सूि द्वारा वनधायररत वकया जाएगा:-
f T2
P = -------
C d2
जहाों, T = एोंडप्लेट की न्यूनतम मोटाई इोंच में,
d = शेल का आोंतररक व्यास इोंच में,
P = पाउण्ड/िगय इोंच में अवधकतम वीकीकायय काययकारी दबाि
C = 0.28260 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) विवनयम 170 में वनधायररत काययकारी धातु तापमान पर अवधकतम वीकीकायय काययकारी स्टरेस
‚f‛
(ग) जहाों स्टील 371 वडग्री सेक्तियस से अवधक तापमान पर कायय के वलए अवभप्रेत वकया
गया हैं, ऐसा कहा जाएगा और वसवलकॉन सामग्री 0.10 प्रवतशत से कम नही ों होगी या
िैकक्तिक रूप से, सामग्री को ‚बॉयलर प्लेट िावलटी की काबयन स्टील प्लेट की प्रूफ टेस्ट हृीप
िावलटी‛ का पास करना होगा जैसा वक पररवशष्ट स-ड़ में है।
(घ) जहाों फ्लैट एोंड प्लेटटस को फ्लैंज में बोल्ट् वकया गया है जैसा वचि 7/39 में दशायया गया
है, फ्लैंवजज के आयाम पररवशष्ट स-च में वदए गए हैं। एोंड प्लेटटस की मोटाई सोंबोंवधत फ्लैंवजज की
मोटाई से कम नही ोंहोनी चावहए।
(ङ) जहाों फ्लैट एोंड प्लेट में होल का व्यास 2½ T + 70 वम.मी. से अवधक है , विवनयम 141
और 179 के अनुसार िवतपूवतय की जाएगी।
(4) (क) जहाों सैडल की िाोंचो ों को स्टड द्वारा शेल में सुरवित वकया जाता है, शेल से सटे फ्लैंज की
न्यूनतम मोटाई वनम्नवलक्तखत तावलका 7/10 के अनुसार होगी :-
तावलका 7/10
हृम सों. शेल प्लेट की मोटाई वम.मी. फ्लैंज की न्यूनतम मोटाई
में वम.मी. में
(1) (2) (3)
1. 9.5 से 19 13
2. 19 से ऊपर 25 तक 16
3. 25 से ऊपर 51 तक 19
4. 51 से ऊपर 25
(ख) फ्लैंवजज के िास्तविक आयाम दरारो ोंकी िवतपूवतय की अपेिाओ ों द्वारा वनधायररत होगों े।
(ग) (i)साधारण बोल्ट् िाले जोड़ो ों के वलए शेल से दूर िाोंचो ों के फ्लैंवजज के आयाम, और
सभी पैड और सैडल के बोल्ट् के आयाम अवधकतम वीकीकायय कायय दबाि और तापमान ि शेल
के अवधकतम वीकीकायय कायय दबाि और तापमान के अनुरूपता के वलए पररवशष्ट स च में दी गई
उपयुि तावलका के अनुसार होगों े।
(ii)विशे जोड़ो ोंके वलए फ्लैंवजज के आयाम, जैसा भी मामला हो, वनरीिण प्रावधकारी या मुख्य
वनरीिक के अनुमोदन के अधीन होगों े।
(घ) िाोंच के ढाोंचे के वलए अवधकतम वीकीकायय काययकारी दबाि का वनधायरण दरारो ों के वलए
िवतपूवतय की आिश्यकताओ ों के आधार पर ऊपर िवणयत उप-विवनयम (1) के खोंड (क) में
प्रदत्त समीकरण के द्वारा वनधायररत वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 261
(ङ)(i) समीकरण से प्राप्त पररणाम के बािजूद, िाोंचो ों के ढाोंचे की न्यूनतम मोटाई ऐसी होनी
चावहए वक वकसी भी क्तस्थवत में आोंतररक दबाि और सभी बाहरी रूप से लागू भार के कारण
स्टरेस के सोंयोजन के पररणामवीकरूप कु ल स्टरेस वीकीकायय वडजायन तापमान के अनुरूप स्टरेस से
अवधक न हो।
(ii)कु ल दबाि की गणना की विवध, जैसा भी मामला हो, वनरीिण प्रावधकारी या मुख्य वनरीिक
के अनुमोदन के अधीन होगी। जहाों बाहरी रूप से लगाए गए भार का पररमाण वनधायररत नही ों
वकया जा सकता है, िहाों िाोंच के ढाोंचे की न्यूनतम मोटाई वनम्न तावलका 7/11 में दी गई है: -
तावलका 7 /11 : ब्ांचो की न्यूनतम मोटाई जहां बाहरी भार ज्ञात नही ंहैं
हृम सों. शेल के बेलनाकार
िाोंच का नोवमनल बोर वम.मी. में भाग की मोटाई ढाोंचे की न्यूनतम मोटाई
वम.मी. में
(1) (2) (3) (4)
1. 19 और 9.5 से
63.5 सवहत 63.5 तक
ऊपर
2. 63.5 से अवधक और 108 सवहत 22 और 11 से
पतले शेल के वलए शेल के
108 तक अवधक
बेलनाकार भाग की मोटाई के आधे
3. 108 से अवधक और 203 सवहत 203 25 और 13 से
से कम नही ों होगी।वनरीिण
तक अवधक
प्रावधकारी के अनुमोदन के अधीन
4. 32 और 16 से होगी ।
203 से अवधक 254 सवहत 254
अवधक
5.
254 से अवधक 32 से अवधक
284. वनमाषण के दौरान वनरीिण –स्टीम ररसीिर सेपरेटसय, कै च िाटर और इसी तरह के िैशि के
सभी वहस्सो,ों का वनरीिण इन विवनयमो ों पररवशष्ट स -क में िवणयत वनमायण के सभी उवचत चरणो ों में वकया
जाएगा।
285. टील स्क्रू ड और सॉके टेड जॉइंट स और टील की माउंवटंग – (1) स्टील कपवलोंग या
सॉके ट का उपयोग पाइपो ोंपर तावलका 7/12 में दी गई सीमा के भीतर वकया जा सकता है:-
तावलका 7/12
हृम सों. अवधकतम
अवधकतम वीकीकायय
वीकीकायय
नोवमनल बोर काययकारी दबाि
तापमान
वकग्रा/सेमी 2 (जी) वडग्री सेक्तियस
(1) (2) (3) (4)
25 वम.मी.सवहत 25 तक 12.25 260
1.
25 वम.मी. से अवधक 38 सवहत 38 वम.मी. तक
10.5 260262 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
2. 38 वम.मी. से अवधक और 75 वम.मी. सवहत 75 वम.मी. 8.75 260
तक
7 260
3. 76 वम.मी. से अवधक और 102 वम.मी.सवहत 102 वम.मी. 8.5 177
तक
4. 102 वम.मी. से अवधक और 127 वम.मी. सवहत 127 वम.मी. 7 171
तक
(2) पेंचदार जोड़ो ों को 260 वडग्री सेक्तियस से अवधक तापमान और इस विवनयम की
तावलका 7/12 में वदए गए आकार या दबाि सीमा से अवधक तापमान पर अनुमवत होगी, बशते वक
वनम्नवलक्तखत शतें पूरी हो,ों अथायतट:-
(क) सभी थ्रेड तब तक टेपर वकए जाते हैं जब तक वक दबाि की जकड़न एक सील िेल्ड
या थ्रेडटस के अलािा लगाने की सतह पर वनभयर न हो और अनुभि या परीिण जोड़ की
उपयुिता को प्रदवशयत करता हो।
(ख) बीएस, एएसएमई, डीआईएन आवद जैसे उपयुि घटक मानक या प्रासोंवगक विवनयम
के तहत गणना के अनुसार दबाि या तापमान रेवटोंग वनधायररत मान से अवधक न हो।
(ग) पेंचदार पाइपो ोंका न्यूनतम वनवदयष्ट स तन्यता बल 30.5 वकग्रा/वम.मी. २ से अवधक है।
(घ) पेंचदार पाइपो ों की न्यूनतम मोटाई इस अवधवनयम की तावलका 7/13 में दी गई मोटाई से
कम नही ोंहोनी चावहए।
(ङ) वडजाइन तापमान 495 वडग्री सेक्तियस से अवधक नही ोंहै।
(च) इस अवधवनयम की तावलका 7/14 में दी गई दबाि सीमा पार नही ोंकी जाती है।
(3) पेंचदार जोड़ो ों को 495 वडग्री सेक्तियस से अवधक तापमान और इस अवधवनयम की
तावलका 7/14 में वदए गए दबाि से अवधक के वलए उपकरण अोंतिेशन और टैवपोंग तथा रेवडयोग्रावफक
वनरीिण हेतु एक्सेस ओपवनोंग के वलए प्लग के वलए अनुमवत दी जाती है, बशते वनम्नवलक्तखत शतें पूरी हो ों
-
(क) िो जो 50 वम.मी. आकार के नोवमनल बोर या नोवमनल आकार के पाइप के एक चौथाई से
अवधक नही ोंहैं, जो भी छोटा हो।
(ख)न्यूनतम थ्रेड इोंगेजमेंट वनम्नवलक्तखत से कम नही ोंहै-
(i) 20 वम.मी. तक वजसमें 20 वम.मी. शावमल है िाले नोवमनल बोर हेतु 6;
(ii) 20 वम.मी. से अवधक और 40 वम.मी. तक वजसमें 40 वम.मी. शावमल है िाले नोवमनल बोर
हेतु 7;
(iii)40 वम.मी.से 50 वम.मी. तक वजसमें 50 वम.मी. शावमल है िाले नोवमनल बोर हेतु 8
(ग) कनेक्शन सील-िेल्ड है।
(घ) उपकरण प्रिेश की वडजाइन द्रि विशे ताओों, द्रि प्रिाह और वकसी भी प्रकार के कों पन को
सहन करने में सिम है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 263
(4) पेंचदार जोड़ो ोंको आउटलेट के अोंत में डेड एोंड इोंस्टूमेंट लाइनो ोंके वलए तावलका 7/14 से 345
बार में वदए गए दबाि से अवधक दबाि और शट ऑफ िाल्व और उपकरणो ों के डाउनस्टरीम, वनयोंिण
उपकरण या नमूना कू लर के वनियहन की अनुमवत है बशते वक नोवमनल बोर पाइप का आकार 12
वम.मी. से अवधक नही ोंहै।
तावलका 7/13: पेंचदार पाइपो ंकी न्यूनतम मोटाई
नोवमनल न्यूनतम मोटाई
हृम सों.
पाइप का 105 वडग्री सेक्तियस (वम.मी.) 105 वडग्री सेक्तियस (वम.मी.) से
आकार से ऊपर भाप के वलए 17.5 अवधक तापमान पर भाप के
(वम.मी.) वकग्रा/सेमी 2 (जी) या कम, वलए 17.5 वकग्रा/सेमी 2 (जी) से
पानी के वलए 7 अवधक पानी के वलए 7
वकग्रा/सेमी 2 (जी) और कम वकग्रा/सेमी 2 (जी) से अवधक
(1) (2) (3) (4)
1. 8 2.24 3.02
2. 10 2.31 3.20
3. 15 2.77 3.75
4. 20 2.87 3.91
5. 25 3.38 4.55
6. 32 3.56 4.85
7. 40 3.68 5.08
8. 50 3.91 5.54
9. 65 5.16 7.01
10. 80 5.49 7.62264 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 7/14: पेंचदार पाइपो ंके वलए अवधकतम स्वीकायष कायषकारी दबाि
हृम सों. नोवमनल पाइप का आकार अवधकतम वीकीकायय काययकारी दबाि
(वम.मी.) (वकग्रा/सेमी 2 (जी) )
(1) (2) (3)
1. 50 से अवधक और 80 तक 28
वजसमें 80 शावमल है
2. 25 से अवधक और 50 तक 42
वजसमें 50 शावमल है
3. 20 से अवधक और 25 तक 84.5
वजसमें 25 शावमल है
4. 20 तक वजसमें 20 शावमल 105.5
है
286. ब्ोजं के पेंचदार और सॉके ट वकए हुए जोड तथा ब्ोजं की माउंवटंग और वफवटंग –
(1) जब दबाि और तापमान हृमशः 8.5 वकग्रा/सेमी 2 (जी) और 225 वडग्री सेक्तियस से अवधक न हो,
तो 76 वम.मी. व्यास तक के िोजों के माउोंवटोंग और वफवटोंग को सीधे स्टील पाइप से पेंच द्वारा जोड़ा जा
सकता है; जहाों टेपर थ्रेड लगें हैं, इस तरह के जोड़ का इस्तेमाल 17.6 वकग्रा/सेमी 2 (जी) से ज्यादा
दबाि के वलए नही ोंवकया जा सकता है।
(2) 76 वम.मी. व्यास से ऊपर व्यास के वलए िोजों वफवटोंग फ्लैंज वनमायण के वलए इस्तेमाल वकये जा
सकते है।
287. ररड्यूवसंग िाल्व – जहाों वकसी पाइप लाइन में ररड्यूवसोंग िाल्व लगाया जाता है, ररड्यूवसोंग िाल्व
के कम दबाि िाले वहस्से पर पाइप लाइन और सहायक एक्सेसररज को एक उपयुि सुरिा िाल्व या
ऐसे िाल्व द्वारा सोंरवित वकया जाना चावहए तावक भाप के अवधकतम वीकीकायय काययकारी दबाि से जैसे
ही अवधक होने पर भाप को पास होने का रास्ता वमल सके या जैसे ही अवधकतम वीकीकायय काययकारी
दबाि पार हो जाता है, भाप की आपूवतय वीकचावलत रूप से काटने के वलए उपयुि उपकरण द्वारा बोंद
हो जाये।
288. लचीलापन- (1) पाइप को इस प्रकार व्यिक्तस्थत वकया जाएगा तावक वसस्टम उनके पूरे विस्तार
और जुड़े हुए उपकरणो ों के द्वारा गई की गवतविवध के िास्तविक विस्ताररत स्टरेस (एसई) के वबना
वीकीकायय स्टरेस सीमा (एसए) से अवधक को, समावहत करने के वलए पयायप्त रूप से लचीला हो वजसको
वनम्नवलक्तखत समीकरण से वनधायररत वकया गया है :-
SA =F (1.25 SC + 0.25 SH) समीकरण (7/11)
जहाों, SC = न्यूनतम (ठोंडा) तापमान पर मूल सामग्री का वीकीकायय स्टरेस,
SH = अवधकतम (गमय) तापमान पर मूल सामग्री का वीकीकायय स्टरेस,
SE = स्टरेस विश्ले ण से प्राप्त िास्तविक पररकवलत विस्ताररत स्टरेस,
F = कु ल ि ों में वजसके दौरान वसस्टम के सोंचावलत होने की उम्मीद है पूणय
तापमान चहृो ों की कु ल सोंख्या ‚N‛ के वलए चहृीय क्तस्थवतयो ों में स्टरेस सीमा में
कमी करने िाले कारको ोंको नीचे दी गई तावलका में वदया गया है:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 265
तावलका 7/15 :टरेस सीमा में कमी करने िाले कारक:
हृम सों. N F
1. 7,000 और उससे कम 1.0
2. 7,000 - 14,000 0.9
3. 14,000 - 22,000 0.8
4. 22,000 - 45,000 0.7
5. 45,000 - 100,000 0.6
6. 100,000 और अवधक 0.5
नोट:
1. एससी और एसएच के िैल्ू की गारोंटी उस स्टील के वनमायता द्वारा दी जाएगी वजससे
पाइप बनाए जाते है और पाइप वनमायताओ ों /वनरीिण प्रावधकारी को प्रस्तुत वकया जाता है
तब तक एससी और एसएच के ऐसी िैल्ू को विवनयमो ोंमें शावमल वकया जाता है।
2. वकसी मान्यता प्राप्त विदेशी मानक या कोड के अनुरूप आयावतत पाइपो ोंके मामले में
एससी और एसएच के िैल्ू को उस कोड में वीकीकायय स्टरेस की तावलका से वलया जा सकता
है या उस कोड में वदए गए आधार पर िैल्ू वनधायररत की जा सकती है।
3. दबाि, िजन और बाहरी भार के कारण बेंवडोंग स्टरेस सवहत अन्य वनरोंतर भार के कारण
लाोंवगट्यूशनल स्टरेस का योग तापीय पररक्तस्थवतयो ों (एसएच) में वीकीकायय स्टरेस से अवधक नही ों
होगा, जहाों इन स्टरेसो ों का योग एसएच से कम है तो एसएच और इस योग के बीच के अोंतर
को एसएच 0.25 की टमय में जोड़ा जा सकता है जो एसए की वीकीकायय स्टरेस की सीमा
वनधायरण करने के वलए उपरोि सूि है।
4. विस्ताररत स्टरेस की गणना, एसई कमरे के तापमान पर लोच के मापाोंक पर आधाररत
होगी।
(2) जहाों व्यािहाररक हो, सुरिा िाल्व वडस्चाजय पाइवपोंग को छोड़कर विशे विस्तार बेंड या विस्तार
जोड़ के सहारे के वबना पाइप के लेआउट में अपेवित लचीलापन प्रदान वकया जाएगा। जहाों जगह
की कमी या अन्य कारणो ों के कारण इस विवध का उपयोग प्रवतबोंवधत है, विस्तार वफवटोंग जैसे
विस्ताररत जोड़ो ों या बैलोज प्रकार के नालीदार पाइपो ों का उपयोग वकया जा सकता है, बशते वक
अवधकतम सीमाओ ों द्वारा लगाए गए एोंकर, गाइड और योजक रेखा को इस तरह वडजाइन वकया
जायेगा तावक यह सुवनवश्चत हो सके वक िे विस्तार वफवटोंग की पयायप्त रूप से रिा करते हैं और
दबाि के कारण अवतररि भार को समायोवजत करते हैं।
(3) इस विवनयम के उप-विवनयम (1) में वनवहत वकसी भी चीज के बािजूद, यवद वसस्टम
वनम्नवलक्तखत मानदोंडो ोंमें से वकसी एक को पूरा करता है तो पाइवपोंग वसस्टम का पूरा विश्ले ण वकए
जाने की प्रवहृया से छू ट दी जा सकती है:
(क) यह पाइवपोंग वसस्टम सफलतापूियक ऑपरेवटोंग इोंस्टॉलेशन को दोहरा लेता है या
वसस्टम को प्रवतस्थावपत कर देता है और इसका सोंतो जनक सवियस ररकॉडय है।266 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) वपछली बार विश्लेव त की गई प्रणाली की तुलना में पाइवपोंग वसस्टम को पयायप्त रूप
से आोंका जा सकता है।
(ग) पाइवपोंग वसस्टम एक समान आकार का है वजसमें दो से अवधक एोंकर नही ों हैं और
कोई मध्यिती बाधा नही ोंहै और वनम्नवलक्तखत को सोंतुष्ट स करता है: -
DY
--------- = 208
(L-U) 2
जहाों, D = नोवमनल पाइप का आकार वम.मी. में
Y= पाइपलाइनो ों द्वारा अिशोव त वकए जाने िाले गवतविवध का
पररणाम,
L = अिरेखा में लोंबाई मापना, मीटर में,
U = एोंकर की दूरी मीटर में (एोंकर को वमलाने िाली सीधी रेखा की
लोंबाई)
नोट:
1. यवद वसस्टम उपरोि मानदोंडो ोंको पूरा नही ोंकर रहा है या जहाों वसस्टम के पयायप्त लोच के
रूप में उवचत सोंदेह है, इसका विश्ले ण इस विवनयम के उप-विवनयम (1) में वदए गए
आधार पर सरलीकृ त, अनुमावनत या व्यापक तरीको ों से वकया जाएगा जो विवशष्ट स मामले के
विश्ले ण के वलए उपयुि हैं।
2. के िल तभी अनुमावनत या सरलीकृ त विवध लागू की जा सकती है यवद उन्हें उसी श्रेणी या
कॉक्तयफ़गरेशन के वलए उपयोग वकया जाता है वजसके वलए उनकी पयायप्त सटीकता प्रदवशयत
की गई है ।
3. थमयल विस्तार, लोच का मापाोंक, पॉइसन अनुपात, लचीलेपन के कारको ों और स्टरेस की
तीव्रता के कारको ोंके वलए डेटा वकसी भी कोड या विवनदेश से वलया जा सकता है।
4. नोवमनल व्यास और नोवमनल मोटाई का उपयोग विस्ताररत स्टरेस की गणना में वकया जा
सकता है।
289. पाइप के कायष को मजबूती प्रदान करने िाले कारक
(1) विस्तार और सोंकु चन के वलए मुि सोंचलन की अनुमवत देने के वलए सभी पाइप के कायय
को पयायप्त रूप से मजबूत वकया जाएगा, और इस तरह की हलचल की मािा उपयुि वबोंदुओ ों पर
एोंकर के प्रािधान द्वारा वकसी भी मेन के पूरे अनुपात में होगी।
(2) जहाों पाइप ऊध्वायधर हलचल करने के अधीन हो सकते हैं, िहाों सभी पररक्तस्थवतयो ों में भार
को िहन करने के वलए वडजाइन वकए गए क्तरोंग सपोटय प्रदान वकए जाएोंगे।
(3) यह आिश्यक है वक मजबूती के वबोंदुओ ों को, जहाों तक व्यािहाररक हो, पाइप जोड़ो ों के
वनकट लगाये जाएोंगी।
(4) रोलर सपोटय के वलए सामान्य रूप से क्तलोंग्स बेहतर होते हैं और इन्हें के िल आिश्यक होने
पर ही उपयोग वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 267
(5) सभी पाइप सपोटय जहाों तक सोंभि हो, माइल्ड स्टील के होने चावहए और पाइप एोंकर या तो
माइल्ड स्टील या कास्ट स्टील के होगों े।
290. डरेनेज - (1)(क) स्टीम मेन के मामले में, नाली पॉके ट के रूप में डरेनेज वबोंदुओ ों के पयायप्त सोंख्या
के प्रािधान पर ध्यान वदया जाएगा।
(ख) स्टरीम-टरैप से जुड़े डरेनेज वबोंदुओों, जहााँ भी काम करने की क्तस्थवत में पानी एकि हो सकता है, प्रदान
वकया जाएगा।
(ग) उन सभी वबोंदुओ ों पर हैंड डरेन की व्यिस्था की जाएगी जहाों पानी, िाल्व ररसाि या अन्य माध्यमो ोंसे,
बोंद होने पर, या उपयोग करने से पहले उपयोग के वलए तैयार करते समय स्टीम मेन के वकसी भी
वहस्से में जमा हो सकता है।
(2) जहाों भी व्यिहायय हो, पाइप के काम में एक उपयुि ढाल प्रदान वकया जाएगा तावक
डरेनेज वबोंदुओ ों की ओर भाप के प्रिाह की वदशा में सोंघवनत पानी का मागय सुवनवश्चत हो सके ।
(3) यह अनुशोंसा की जाती है वक प्रत्येक स्टीम टरैप पर एक बाईपास लगाया जाएगा।
(4) जहाों बहुत ज्यादा मािा में पानी के इकट्ठे होने की सोंभािना है, िहाों सेपरेटर स्थावपत
वकया जाएगा।
(5) प्रत्येक सेपरेटर को एक स्टीम टरैप से तैयार वकया जाएगा जो वक तीन-तरफा कॉक के
माध्यम से इससे जुड़ा होगा, वजसका एक वसरा मैन्युअल रूप से सोंचावलत नाली से जुड़ा
होगा।
291. जंग और अन्य बाहरी पदाथों से मुल्पि - सभी पाइपो,ों िाल्वो ों और वफवटोंग्स को वनमायण से
पहले जोंग और अन्य बाहरी पदाथों से यथासोंभि अच्छी तरह से साफ वकया जाएगा और पाइप लाइनो ों
को काम में लेने से पहले भाप या हिा से साफ वकया जाएगा।
292. दबाि परीिण - (1) अध्याय-2 की आिश्यकताओ ों के अनुसार प्रत्येक पूणय पाइप और
वफवटोंग का हाइडरोवलक दबाि द्वारा परीिण वकया जाएगा।
(2)(क) 7 वकग्रा/सेमी 2 (जी) से अवधक भाप के दबाि के वलए फ्लैंवजज के साथ पाइप और
वफवटोंग का परीिण खाली फ्लैंवजज बोल्ट् या क्लैम्प्ड के साथ वकया जाएगा।
(ख) अन्य सभी पाइप यवद सीधे हैं, तो इनका परीिण एक साधारण हाइडरोवलक पाइप परीिण
मशीन के वसरो ोंके बीच वकया जा सकता है।
(3) (क) पाइवपोंग वसस्टम वनमायण के बाद, हाइडरोस्टेवटक दबाि परीिण के अधीन होगा।
(ख) पाइवपोंग वसस्टम में वकसी भी वबोंदु पर हाइडरोस्टेवटक परीिण दबाि वडजाइन दबाि के 1.5
गुना से कम नही ोंहोना चावहए, लेवकन वकसी भी गैर-पृथक घटको ोंजैसे िेसल, पोंपो ोंया िाल्वो ोंके
अवधकतम वीकीकायय परीिण दबाि से अवधक नही ोंहोना चावहए।
(ग) हाइडरोस्टेवटक परीिणो ों के दौरान वकसी भी समय पाइवपोंग वसस्टम के वकसी भी वहस्से को
परीिण तापमान पर अपनी यील्ड स्टरेंथ (0.2 प्रवतशत ऑफ सेट) के 90 प्रवतशत से अवधक
स्टरेस के अधीन नही ोंवकया जाएगा।
इस उप-खोंड में वकसी भी बात के होते हुए भी, बॉयलर की बाहरी पाइवपोंग और गैर-बॉयलर
बाहरी पाइवपोंग के वलए, जो िेंट और डरेन पाइप जैसे िातािरण में खुले हैं, अोंवतम आइसोलेशन268 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
िाल्व से परे क्तस्थत ऐसे पाइपो ों के वहस्सो ों के वलए हाइडरोवलक परीिण को छोड़ा जा सकता है,
बशते वक सोंदवभयत पाइप में िेल्ड जोड़ो ों को अनुमोवदत गैर विनाशक परीिा द्वारा 100%
परीिण वकया जाता है और सोंतो जनक पाये गये हैं।
(4) बेंड और अन्य वफवटोंग जो फ्लैंज नही ोंहैं, के परीिण के वलए पररक्तस्थवतयो ों के अनुसार
विशे व्यिस्था की जाएगी।
(5) बट िेल्ड और सॉके ट िेल्डेड जोड़ो ों का हाइडरोवलक परीिण या तो वनमायताओ ों के
काययस्थल पर या उपयोगकताय के पररसर में वनरीिण प्रावधकारी द्वारा पाइप के वनमायण के पूरा
होने पर वकया जाएगा।
(6) (क) फ्लैंवजज, वफवटोंग्स, बट जॉइोंटटस, िाोंच जॉइोंटटस और िेल्डोलेटटस को जोड़ने िाले
फै विके टेड पाइपो ों का हाइडरोस्टेवटक परीिण वनमायता के काययस्थल पर या िैकक्तिक रूप से
साइट पर अवधकतम वीकीकायय काययकारी दबाि के 1.5 गुना पर वकया जाएगा।
(ख) जहाों विवनमायता के काययस्थल में फे विके टेड पाइप जोड़ो ों का हाइडरोवलक परीिण नही ों
वकया जाता है, ऐसे जोड़ो ों के पाोंच प्रवतशत रेवडयोग्राफी के साथ िेल्ड जोड़ो ों पर डाई-पेनेटरेंट
परीिण वकया जाएगा।
अध्याय-8
वनमाषण और बॉयलर पंजीकरण के दौरान बॉयलरो ंऔर पाइपो ंका वनरीिण और परीिण
293. सामान्य- (1) दुकान और फील्ड साइट पर बॉयलर के वनमायण के दौरान और बॉयलर के
पोंजीकरण के वलए आिेदन के सोंबोंध में और बॉयलरो ों की जाोंच के सोंबोंध में वनरीिण प्रावधकारी इन
विवनयमो ोंके तहत प्रदान की गई प्रवहृया का पालन करेगा।
(2) सिम व्यक्ति द्वारा अनुमोवदत प्रपि-VIII के अनुसार अोंवतम वनरीिण ररपोटय के आधार पर बॉयलर
घटको ों को साइट पर स्थावपत वकया जाएगा। वकसी भी जमीनी वनरीिण या वकसी अन्य दस्तािेज जैसे
वनमायण वचि, वडजाइन गणना आवद को जमा करने की कोई आिश्यकता नही ोंहै ।
294. बॉयलर घटक की पहचान के वलए मावकिं ग - (1) कन्रेक्शन बैंक ट्यूबो,ों लूज ट्यूबो,ों
कॉयल - इिेपोरेटर सुपर हीटर और इकोनोमाइजर, राइजर डाउनकॉमर और सेचुरेटेड सप्लाई पाइप,
अटेम्परेटरवलोंक पाइवपोंग, बॉयलर इोंटीग्रल और नॉन इोंटीग्रल पाइवपोंग, वबना हैडर के िाटर िॉल पैनल
को नीचे दी गई तावलका के अनुसार सामग्री ग्रेड, बाहरी व्यास और मोटाई के बािजूद स्टेंवसल वकया
जाएगा।
(2) इन घटको ोंपर सिम व्यक्ति की कोई स्पष्ट स मुहर नही ोंहोगी।
तावलका 8/1
बॉयलर प्रेशर पाटष घटको ंकी पहचान
हृम सं. घटक थान / टेंवसवलंग के सिम व्यल्पि पहचान
साथ पंवचंग की मुहर
1 बॉयलर ब्लॉक असेंबली डी/ई पर हाडय पोंवचोंग हाों प्रपि I (भाग-ग) के
अनुसार[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 269
2 फायर ट्यूब बॉयलर शेल पर हाडय पोंवचोंग हाों प्रपि I (भाग-ग) के
असेंबली अनुसार
3 स्टीम डरम डी/ई पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
अनुसार
4 पानी का डरम डी/ई पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
अनुसार
5 हैडर के साथ पैनल हैडर पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
अनुसार
6 कन्रेक्शन बैंक असेंबली हैडर पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
अनुसार
7 इन बेड सुपर हैडर पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
हीटर असेंबली अनुसार
8 सुपर हीटर असेंबली हैडर पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
अनुसार
9 बाई डरम डी/ई पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
इिेपोरेटरअसेंबली अनुसार
10 इन बेड इिेपोरेटर हैडर पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
असेंबली अनुसार
11 एचआरएसजी हापय हैडर पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
अनुसार
12 एचआरएसजी मॉड्यूलर हैडर पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
असेंबली अनुसार
13 इकोनोमाइजर हैडर पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
मॉड्यूलर असेंबली अनुसार
14 हेडर हैडर पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
अनुसार
15 टैंक शेल पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
अनुसार
1 िाटर क्लेक्तरोंग टैंक पाइप पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
अनुसार
17 िवटयकल स्टीम सेपरेटर पाइप पर हाडय पोंवचोंग हाों प्रपि I(भाग-ग) के
अनुसार
18 वबना हैडर का पैनल ट्यूब पर स्टेंवसवलोंग नही ों बॉयलर
नोंबर, डरॉइोंग नोंबर,
पाटय नों
19 राइजर डाउन कॉनयर पाइप पर स्टेंवसवलोंग नही ों बॉयलर
सेचुरेवटड़ सप्लाई पाइप नोंबर डरॉइोंग नोंबर,
पाटय नों
20 अटेम्परेटर वलोंक पाइप पर स्टेंवसवलोंग नही ों बॉयलर
नोंबर, डरॉइोंग नोंबर,
पाटय नों
21 बॉयलर इोंटीग्रल पाइप पर स्टेंवसवलोंग नही ों बॉयलर
पाइवपोंग नोंबर, डरॉइोंग नोंबर,270 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पाटय नों
22 बॉयलर नॉन इोंटीग्रल पाइप पर स्टेंवसवलोंग नही ों बॉयलर
पाइवपोंग नोंबर, डरॉइोंग नोंबर,
पाटय नों
23 कन्रेक्शन बैंक ट्यूब ट्यूब पर स्टेंवसवलोंग नही ों बॉयलर नोंबर, ट्यूब
नोंबर /पाटय नोंबर
24 लूज ट्यूब ट्यूब पर स्टेंवसवलोंग नही ों बॉयलर नोंबर, ट्यूब
नोंबर / पाटय नोंबर
25 कॉइल –इिेपोरेटर, ट्यूब पर स्टेंवसवलोंग नही ों बॉयलर नोंबर,
सुपर हीटर एोंड आइटम वििरण,
इकोलोमाइजर, री- पाटय सोंख्या
हीटर कॉइल, प्लेवटन
सुपर हीटर कॉइल
295. वनरीिण की तैयारी – (1) (क) (i)बॉयलर के प्रत्येक परीिण में या वकसी प्रमाणपि के
निीनीकरण की वीकीकृ वत, बॉयलर के सभी भाग खाली और पूरी तरह से साफ होगों े। उप-विवनयम (6)
में बताए गए भागो ों को छोड़कर, मैनहोल के सभी दरिाजे, हैंड होल और साइट होल और क्तक्लवनोंग
प्लग और हेडर में सभी कै प और िॉटर ट्यूब बॉयलरो ों के मड डरम, सभी फायर बार, वबयरसय, फ्रों ट
प्लेट, विज प्लेटटस के अलािा , फायर विज विक आकय , तेल ईोंधन बनयर और याोंविक स्टोकर वफवटोंग को
हटा वदया जाएगा।
(ii) सिम व्यक्ति के आने से पहले, बॉयलर माउोंवटोंग िाले सभी िाल्व और कॉक को खोल वदया
जाएगा और अलग कर वदया जाएगा और जब आिश्यक हो तो िाल्व या कॉक्स को ग्राउोंड कर
वदया जाएगा।
(ख) ऐसे बॉयलर के वलए पोंजीकरण के समय फायर बार, वबयरसय, फ्रों ट प्लेटटस, विज प्लेटटस,
फायर विज, विक आकय , ऑयल फ्यूल बनयर और मैके वनकल स्टोकर वफवटोंग को हटाने
की आिश्यकता नही ों है, वजसके वलए बॉयलर प्रेशर पाटय असेंबली पूरी हो गई है और सिम
व्यक्ति द्वारा वनमायणकताय के काययस्थल पर हाइडरॉवलक टेस्ट वकया गया है।
(2)(क) यवद सिम व्यक्ति द्वारा आिश्यक हो, लैवगोंग या विक-िकय या अन्य छुपाने िाले वहस्से को
हटाने और प्लेटो ों की वडरवलोंग के वलए और प्रेशर गेज और सुरिा िाल्व आयामो ों और भार के
सत्यापन के वलए प्रािधान वकया जाएगा।
(ख) बॉयलर के पोंजीकरण के समय लैवगोंग या विक-िकय या अन्य छुपे वहस्सो ों को हटाने
की आिश्यकता नही ों है, वजसके वलए बॉयलर प्रेशर पाटय असेंबली पूरी हो गई है और सिम
व्यक्ति द्वारा वनमायणकताय के काययस्थल पर हाईडरॉवलक टेस्ट वकया गया है।
(3) सभी स्भोक ट्यूब, पानी की नवलयो ों के बाहरी वहस्से, स्भोक बॉक्स और बाहरी वचमनी को साफ
वकया जाएगा।
(4) इन विवनयमो ों के अध्याय-9 में यथापेवित भाप के अधीन अन्य बॉयलर के साथ सभी भाप और
गमय पानी के सोंचार को प्रभािी ढोंग से विच्छेदन का प्रािधान वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 271
(5) सेफ्टी िॉल्व चेस्ट और बॉयलर के बीच आम तौर पर कोई ब्लैंक फ्लैंज/प्लग नही ोंडाला जाएगा
और जहाों सिम व्यक्ति द्वारा इसकी अनुमवत दी जाती है, िहाों ब्लैंक फ्लैंज/प्लग उसकी
उपक्तस्थवत में हटा वदया जाएगा।
(6) िैकक्तिक िाव यक वनरीिणो ों पर और कम से कम तीन वनचली पोंक्तियो ों या सभी ट्यूबो ों के
अधीन रहते हुए वनरीिण के वलए पहले हीट पास को खोला जाएगा, जहाों उप-विवनयमन (1) के
तहत, सिम व्यक्ति अपने वििेक पर 90 टन प्रवतघोंटे और उससे अवधक की िाष्पीकरणीय
िमता िाले बॉयलरो ों के पि में वनरीिण की तैयारी में छू ट दे सकता है और सिम व्यक्ति की
सोंतुवष्ट स के वलए टरीटेड फीड िाटर का प्रयोग वकया सकता है।
(7) विशे रूप से विदटयुत ऊजाय उत्पादन के वलए उपयोग वकए जाने िाले बॉयलरो ों के वलए,
वनरीिण पररवशष्ट स-ज के प्रािधानो ोंके अनुसार वकया जाएगा।
(8) (क) वनरोंतर प्रवहृया सोंयोंिो ों में विशे रूप से उपयोग वकए जाने िाले अपवशष्ट स ताप बॉयलरो ों
(फायडय और अनफायडय) के वलए, वनरीिण पररवशष्ट स-झ के प्रािधानो ोंके अनुसार वकया जाएगा।
(ख) सोंिारक पररिेश में उपयोग वकए जाने िाले बॉयलर जैसे सल्फ्यूररक एवसड सोंयोंि, पररवशष्ट स
एचबी के प्रािधानो ोंके तहत किर नही ोंवकए जाएोंगे।
(9) फोस्डय फ्लो और फोस्डय सक्यूयलेशन प्रकार के बॉयलरो ोंके मामले में, पानी के प्रिाह द्वारा सवकय ट
के सभी भागो ों के माध्यम से उवचत पररसोंचरण बनाए रखने की जाोंच के वलए प्रािधान वकए
जाएोंगे।
296. बॉयलरो ं का हाईडरॉवलक परीिण - (1) प्रत्येक बॉयलर का वनरीिक की उपक्तस्थवत में
हाईडरॉवलक परीिण वकया जाएगा।
(2) 50 वकग्रा/सेमी 2 (जी) या अवधक दबाि पर काम कर रहे बॉयलर, और विशे रूप से वबजली
उत्पादन के वलए उपयोग वकए जाने िाले बॉयलर को हर साल प्रमाण पि जारी करने के वलए
हाईडरॉवलक रूप से परीिण करने की आिश्यकता नही ोंहै, बशते वक ऐसे बॉयलर का वनरीिण
विवनयम 295 के उप-विवनयम (7) के प्रािधानो ोंके अनुसार वकया गया है।
(3) वनरोंतर प्रवहृया सोंयोंिो ोंमें विशे रूप से उपयोग वकए जाने िाले िेस्ट हीट बॉयलर (फायडय और
अनफायडय) को हर साल प्रमाण पि जारी करने के वलए हाईडरॉवलक रूप से परीिण करने की
आिश्यकता नही ों है बशते वक ऐसे बॉयलर का वनरीिण विवनयम 295 के उप-वनयम (8)
प्रािधानो ोंके अनुसार वकया गया है।
297. हाईडरॉवलक परीिण की तैयारी - (1) भाप के दबाि के अध्यधीन सभी माउोंवटोंग के अग्र
भाग उवचत स्थान पर कसकर बोंद या ब्लैंक फ्लैंज के रूप में होने चावहए।
(2) सेफ्टी िॉल्व को हमेशा हटा देना चावहए और चेस्ट ओपवनोंग ब्लैंक फ्लैंज होना चावहए।
(3) सिम व्यक्ति के प्रेशर गेज के वलए सम्बध्द उपकरण वहृयाशील होगों े।
(4) (क) सभी दरिाजे ठीक तरह से जुड़े और कसे होने चावहए।272 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) बॉयलर पूरी तरह से पानी से भरा होना चावहए, सभी तरह की हिा की बाहरी वनकासी का
ध्यान रखा जाएगा और, यवद सोंभि हो तो, बॉयलर के वडजाइन दबाि से अवधक नही हो, पर
जोड़ो ोंकी पकड़ का परीिण सिम व्यक्ति की यािा से पहले कर वलए जाएगा।
(5) जब बॉयलर का पहली बार हाईडरॉवलक परीिण वकया जाता है, तो यह पूरी तरह से लैवगोंग या
ईोंट के काम से मुि होगा; और अनुिती परीिणो ों में सिम व्यक्ति द्वारा आिश्यक होने पर
लैवगोंग या ईोंट के काम, या उसके वहस्से को हटा वदया जाएगा बशते वक सिम व्यक्तिअपने
वििेकानुसार, बॉयलर के मामले में लैवगोंग और ईोंट के काम को यथाित रहने की अनुमवत दे
सकता है, जहाों किर वकए गए भागो ों कावनमायण वकया गया है और इस क्तस्थवत में वनमायण से
पहले परीिण वकया गया है।
298. हाईडरॉवलक टेट की प्रवहृया - (1) (क) विवनयम 300 के उप-विवनयम (1) के प्रािधानो ों के
अधीन, प्रत्येक सब-वहृवटकल बॉयलर का सिम व्यक्ति की उपक्तस्थवत में साइट पर वनमायण के बाद
हाइडरॉवलक रूप से, जैसा वक प्रपि-I (भाग-ख) या प्रपि-1 (भाग-ग) में, जैसा भी मामला हो, वनरीिण
प्रावधकारी द्वारा प्रमावणत वकये गए वडजायन दबाि से 1.25 गुना पर परीिण वकया जाएगा और जैसा
वक कमी या दो ो ों के वकसी भी सोंके त से मुि है इसकी बॉयलर पर स्टाोंप लगाई जाएगी तथा प्रत्येक
सुपर वहृवटकल बॉयलर, वबना वकसी वनवश्चत भाप और जल रेखा के , जल-भाप प्रिाह के पथ के साथ
विवभन्न दबाि स्तरो ों के वलए वडजाइन वकए गए दबाि िाले वहस्सो ों को सिम व्यक्ति की उपक्तस्थवत में
साइट पर वनमायण के बाद, वनरीिण प्रावधकारी द्वारा प्रपि-I (भाग-ख) या प्रपि-1 (भाग-ग) में, जैसा भी
मामला हो, सुपर हीटर आउटलेट के प्रमावणत दबाि के कम से कम 1.5 गुना दबाि पर हाईडरॉवलक
रूप से परीिण वकया जाएगा जो बॉयलर के वकसी भी वहस्से पर जो वडजाइन दबाि के 1.25 गुना से
कम नही ोंहोगा और वकसी भी कमी या दो ो ों के वकसी भी सोंके त से मुि है इसकी बॉयलर पर स्टाोंप
लगाई जाएगी।
(ख) यवद विवनयम 167 के अनुसार विवनमायता के पररसर में बॉयलर के सभी घटको ों का
हाइडरॉवलक रूप से परीिण नही ोंवकया गया है, तो इसके पूणय होने पर, वडजाइन दबाि
के 1.5 गुना दबाि पर इनका परीिण वकया जाएगा।
(ग) दबाि परीिण के माध्यम के रूप में उपयोग वकए जाने िाले पानी का तापमान
20 वडग्री सेक्तियस से कम और 50 वडग्री सेक्तियस से अवधक नही ों होना
चावहए।
(घ) परीिण दबाि को हर समय उवचत वनयोंिण में धीरे-धीरे बााया जाएगा तावक यह
वकसी भी समय आिश्यक दबाि के 6% से अवधक न हो और इस 30 वमनट तक
बनाए रखा जाएगा, वजसके बाद दबाि को अवधकतम वीकीकायय काययशील दबाि
तक कम वकया जाएगा और दबाि िाले वहस्सो ोंसे ररसाि की जाोंच करने के वलए वनकट
दृश्य वनरीिण की अनुमवत देने के वलए इसे पयायप्त समय तक बनाए रखा जाएगा।
(ड़) निीकरण या रेटरोवफट या पुजों के वलए बने घटको ों के वलए साइट पर हाईडरॉवलक
परीिण वडजाइन दबाि के 1.25 गुना दबाि पर वकया जाएगा और इन घटको ों को
वनमायता के पररसर में हाईडरॉवलक रूप से परीिण करने की आिश्यकता नही ोंहै।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 273
(2) बॉयलर को कम से कम लगातार दस वमनट के वलए वबना वकसी ररसाि या अनुवचत
वििेपण या उसके भागो ों के विरूपण के वबना ऐसे दबाि का सोंतो जनक ढोंग से कायय
करना चावहए। यवद परीिण सोंतो जनक नही ों है, तो गणना द्वारा वीकीकायय वडजाइन
दबाि को उपयुि रूप से कम वकया जाएगा, जब तक वक मावलक ऐसे पररितयन
करने की इच्छा नही ों रखता है, जो बॉयलर को हाईडरॉवलक परीिण को सोंतो जनक
ढोंग से झेलने में सिम बनाता है, और ऐसे मामलो ोंमें इन पररितयनो ोंके बाद बॉयलर की
वफर से जाोंच की जाएगी। यवद आिश्यक हो तो ऑल्ट्रेशन के बाद दबाि की
पुनगयणना की जाएगी और सिम व्यक्ति की सोंतुवष्ट स के वलए बॉयलर का परीिण वकया
जाएगा।
(3) मूल प्रमाण पि जारी करने से पहले बॉयलर के पहले हाईडरॉवलक परीिण में, प्रत्येक
भट्ठी की लोंबाई, फायर-बॉक्स और फ्लैट एोंड या अन्य प्लेटो ों के परीिण के पहले,
दौरान और बाद में वििेपण माप वकए जाएोंगे।
(4) हाईडरॉवलक परीिण के आिेदन के बाद, सिम व्यक्ति बॉयलर के अोंदर और बाहर
सािधानीपूियक जाोंच करेगा और वीकयों को सोंतुष्ट स करेगा वक उसने सोंतो जनक ढोंग से
जाोंच की है।
(5) (क) यवद परीिण की प्रगवत के दौरान बॉयलर के वकसी भी वहस्से में अनुवचत वििेपण
या स्थायी सेट का सोंके त वदखाई देता है, तो सोंके त वदखाई देने पर दबाि तुरोंत हटाया
जाएगा।
(ख) स्थायी सेट के वबोंदु पर पहुोंचने पर भाग के वलए अवधकतम वीकीकायय काययशील दबाि
परीिण दबाि का 40 प्रवतशत होगा। यह प्रवहृया वकसी भी परीिण में वकसी भी
बॉयलर पर लागू होगी।
(6) बॉयलरो ों के हाईडरॉवलक परीिण की अनुिती जाोंच,बॉयलर के वडजाइन दबाि के 1.25
गुना पर होगों े ।
(7) जब बॉयलर के आकार का आोंतररक वनमायण सिम व्यक्ति को उसके अोंदर जाने या
उसके सभी भागो ों की बारीकी से जाोंच करने की अनुमवत नही ोंदेता है, तो िह प्रत्येक
वनरीिण या वीकीकृ वत या प्रमाणपि के निीनीकरण पर इसे हाईडरॉवलक दबाि द्वारा
वडजाइन दबाि के 1.5 गुना दबाि पर जाोंच करके देखेगा।
(8) िाटर ट्यूब लोकोमोवटि प्रकार के बॉयलरो ों और सभी ट्यूबलर बॉयलरो ों के प्रमाण पि
की वीकीकृ वत या निीनीकरण के वलए इनका प्रत्येक वनरीिण में हाइडरॉवलक रूप से
परीिण वकया जाएगा, जब तक वक मुख्य वनरीिक के आदेश के तहत इस तरह के
परीिण से छू ट नही ोंकी जाती।
(9) सिम व्यक्ति यवद आिश्यक समझे तो वकसी भी वनरीिण में वकसी भी बॉयलर में
हाईडरॉवलक परीिण लागू कर सकता है।
(10) ऊध्वायधर बॉयलरो ोंके हीवटोंग सतह के मामलो ोंको छोड़कर, वजनकी हीवटोंग सतह 18.5
मी 2 पोटेबल और िहीक्यूलर बॉयलर से कम है, वजन्हें ईोंट के काम में पुन: वनमायण या
भिन की आिश्यकता नही ोंहै, सभी बॉयलरो ोंके हाईडरॉवलक परीिण, के िल वनमायण के274 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
बाद आयोवजत वकए जाएोंगे, बॉयलर इन सीटू और सभी बॉयलरो ों को पुन: वनमायण के
बाद उस क्तस्थवत से वभन्न क्तस्थवत में स्थावपत वकया जाएगा, वजसमें वपछली बार
हाइडरॉवलक परीिण द्वारा जाोंच की गई थी।
(11) बाे हुए दबाि के प्रमाणपि देने और बॉयलर की मरम्मत के बाद हाईडरॉवलक टेस्ट भी
वलया जाएगा। हालाोंवक, िाटर ट्यूब बॉयलरो ों की मामूली मरम्मत के मामले में जहाों
(गैर-विनाशकारी परीिण) (एनडीटी) वकया गया है, हाईडरॉवलक परीिण वकया जा
सकता है बशते एनडीटी एक अनुमोवदत विवध द्वारा वकया जाता है।
(12) हाईडरॉवलक परीिण करते समय, सिम व्यक्ति यह सुवनवश्चत करेगा वक दबाि गेज में
िैध अोंशाोंकन वकया गया हो।
299. भाप परीिण - (1) प्रत्येक बॉयलर पोंजीकरण से पहले और प्रत्येक अन्य बॉयलर,
वजसका वडजाइन दबाि बदल वदया गया है, ऐसे बॉयलर के वलए मूल या निीनीकरण प्रमाण पि जारी
करने से पहले वनरीिक की सोंतुवष्ट स के वलए, भाप के तहत परीिण वकया जाएगा। वनरीिक, भाप
परीिण के वलए वनधायररत वतवथ के वलए मावलक को नोवटस भेजेगा और परीिण पूरा होने पर वनरीिक,
वनरीिण पुस्तको ोंके ज्ञापन में सभी प्रासोंवगक वििरण दजय करेगा।
(2) परीिण के समय, सुरिा िाल्व मुि छोड़ वदए जाएोंगे और िे अनुमोवदत वडजाइनदबाि के
अनुसार एडजस्ट वकए जा सकें गे।
(3) िाल्वो ोंको सही ब्लोइोंग प्रेशर पर एडजस्ट करके के बाद बॉयलर को पूरी भाप के तहत
और फीड िाटर फ़ाइररोंग बोंद करके और स्टॉप-िाल्व बोंद करके चलाया जाएगा और वनरीिक दबाि
बाने के साथ अन्य वििरणो,ों जैसे वक सुरिा िाल्वो ोंकी लोवडोंग और एडजस्टमेंट को नोट करेगा।
(क) सब-वहृवटकल िॉटर ट्यूब बॉयलर या सुपर हीटर के साथ लगे बॉयलर के मामले में,
फीड िॉटर कनेक्शन और स्टॉप िाल्व को बोंद करने की आिश्यकता नही ों है और यवद कु ल
िाल्व िेि को उठा वलया जाता है और गणना द्वारा पयायप्त पाया जाता है, तो सोंचय परीिण
आिश्यकता को सोंतुष्ट स वकया गया माना जाएगा, यवद िाल्व को इस प्रकार एडजस्ट वकया जाए
वक कम से कम एक सुरिा िाल्व को बॉयलर के वडजाइन दबाि पर या उससे नीचे रखा हो
और शे सुरिा िाल्व को वडजाइन दबाि से 3 प्रवतशत ऊपर तक सेट वकया जा सकता है।
बशते सभी िाल्वो ों को उठा वलया जाएगा तावक समस्त भाप जो बॉयलर द्वारा उत्पन्न की जा
सकती है, वडजाइन दबाि के 10 प्रवतशत से अवधक नही ों होने िाले दबाि के साथ छोड़ी जा
सकती है ;
(ख) सुपर वहृवटकल बॉयलर या बॉयलरो ोंके मामले में, वजसमें वनवश्चत स्टीम या िाटर लाइन
न हो, और िाटर स्टीम फ्लो के पाथ के विवभन्न दबाि स्तरो ों के वलए वडजाइन वकए गए प्रेशर
पाटय के मामले में, वजस घटक पर सुरिा िाल्व क्तस्थत है उसके अवधकतम वीकीकायय िवकिं ग प्रेशर
से 10 प्रवतशत ऊपर तक सुरिा िाल्व स्थावपत वकया जाएगा।
बशते सभी िाल्वो ों को उठा वलया जाए तावक बॉयलर द्वारा उत्पन्न की जा सकने िाली सम्पूणय
भाप को व्यक्तिगत घटक के अवधकतम वीकीकायय कायय दबाि के 13 प्रवतशत से अवधक नही ों
होने िाले दबाि के साथ छोड़ा जा सके , बशते बॉयलर में वीकचावलत बनयर प्रबोंधन प्रणाली और[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 275
मास्टर ईोंधन वटरप (एमएफ़टी) हो और मुख्य भाप का दबाि अवधक होने पर, सुरिा िाल्व उठने
का परीिण हायडरोवलकली ऐ्यूएटेड तरीको ोंसे वकया जा सकता हो।
(4) सुरिा िाल्व परीिण से पहले, वनरीिक खुद को सोंतुष्ट स करेगा वक पानी के गेज
काम कर रहे हैं, और फ़ीड उपकरण बॉयलर को पयायप्त पानी की आपूवतय करने में
सिम है।
(5) जहाों वनयमो ों के अनुसार, बॉयलर प्रभारी व्यक्ति को योग्यता प्रमाण पि युि होने की
आिश्यकता नही ोंहै, वनरीिक, जब िह उवचत समझे, पूछताछ करके या व्यािहाररक परीिण
द्वारा वीकयों को सोंतुष्ट स कर सकता है वक क्या बॉयलर का प्रभारी व्यक्ति पानी के गेज, दबाि
नापने के योंि, सुरिा िाल्व, फ़ीड पानी की आपूवतय और ब्लो डाउन के उपयोग और उद्देश्य को
समझता है।
(6) सुरिा िाल्व परीिण देखते समय, वनरीिक यह सुवनवश्चत करेगा वक दबाि गेज में िैध
मापाोंकन मौजूद है।
(7) वकसी भी भाप गेज का उपयोग उसके और बॉयलर के बीच पानी से भरे साइफन के
वबना नही ोंवकया जाएगा।
(8) जब भाप परीिण में दबाि का सोंचय, वडजाइन दबाि के दस प्रवतशत से अवधक हो
जाता है तो सुरिा िाल्व के िेि को अपयायप्त माना जाएगा, और सुरिा िाल्व िेि में
िृक्तद् होने तक प्रमाण पि अवीकीकार कर वदया जाएगा ।
(9) एक वनरीिक, जब वकसी भी उद्देश्य के वलए वकसी कारखाने का दौरा करते समय,
अपने मानक दबाि गेज की तुलना से तुलना करके भाप के तहत वकसी भी बॉयलर के सुरिा
िाल्व और दबाि गेज की शुद्ता को सत्यावपत कर सकता है।
* नोट: एक भाप परीिण मुख्य रूप से िास्तविक परीिण द्वारा पता लगाने के उद्देश्य से होता है वक
क्या सुरिा िाल्व, बॉयलरो ों को अवतररि भाप से प्रभािी ढोंग से राहत देने के वलए पयायप्त हैं और
क्या िे उस समय काम करते हैं जब अवधकतम वीकीकायय काययशील दबाि पहुोंच जाता है।
300. पंजीकरण की प्रवहृया - (1) अवधवनयम की धारा 12 की उप-धारा (1) के तहत, प्रमाण पि और
डराइोंग के साथ, जैसा वक विवनयमन 8 में वनधायररत है पोंजीकरण के वलए एक आिेदन प्राप्त होने
पर, वनरीिक , जब वीकयों को सोंतुष्ट स कर लें वक बॉयलर को वनरीिण के वलए उवचत रूप से तैयार वकया
गया है तब उसका वनरीिण करने के वलए आगे बाें और वीकयों को इस बात के वलए सोंतुष्ट स करने के वलए
वक बॉयलर को विवनमायण के स्थल से उसके लगाए जाने िाले स्थान तक उसके पारगमन के दौरान
कोई नुकसान नही ों हुआ है और यवद िह वनमायता के प्रमाण पि की प्रामावणकता और सामग्री के
सोंबोंवधत अन्य वििरणो ोंसे अवधवनयम की धारा 19 की उप-धारा (1) के खोंड (ग) और विवनयम 7 के के
अनुसार सोंतुष्ट स है, तो कारीगरी और प्रत्येक भाग के विवनमायण के वििरण को विवधित रूप से नोट
करें।
(2) मुख्य वनरीिक द्वारा प्रयोग की जाने िाली वकसी भी वििेकाधीन शक्ति के अधीन, िह
प्रपि-I (भाग-ख) और प्रपि-I (भाग-ग), जैसा भी मामला हो और प्रपि-IV (भाग-क) में276 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वनरीिण प्रावधकारी द्वारा प्रमावणत बॉयलर के अनुमेय कायय दबाि को वीकीकार कर सकता है
और बॉयलर का वनरीिण करने के बाद, विवनयम 298 की आिश्यकताओ ों के
अनुसार वनरीिक इसका हाईडरॉवलक परीिण करेगा और हाईडरॉवलक परीिण के बाद धारा
14 के तहत प्रपि-X में एक अनोंवतम आदेश जारी वकया जाएगा।
(3) यवद उप-विवनयमन (2) के तहत अनोंवतम आदेश की आिश्यकताओ ों को पूरा नही ों
वकया जाता है, तो बाद में वबना वकसी वनरीिण और शुल्क भुगतान के पहले अनोंवतम आदेश
जारी होने की तारीख से बारह महीने की कु ल अिवध के भीतर अवधकतम छह महीने के वलए
नए अनोंवतम आदेश जारी वकए जाएोंगे।
(4) वनरीिक बॉयलर के ऊपर वदये गए ब्यौरे और आयामो ों को हाईडरॉवलक परीिण के
वििरण के साथ, विवनयम 306 के तहत प्रपि-XI (वनरीिण ज्ञापन" पुस्तक) में दजय करेगा और
बॉयलर के वलए सभी वनमायताओ ों के 'कागजात के साथ, वनरीिक की ररपोटय के साथ मुख्य
वनरीिक को प्रस्तुत वकया जाएगा और रवजस्टरी सोंख्या जारी होने के
बाद, वनरीिक विवनयम 299 के अनुसार भाप परीिण करेगा और भाप परीिण का
वििरण प्रपि-XI में दजय करेगा ।
301. पंजीकरण संख्या का उत्कीणषन – (1) (क) (i) पोंजीकरण सोंख्या, उसकी प्राक्तप्त की तारीख से
एक महीने की अिवध के भीतर प्रत्येक बॉयलर की पोंजीकरण सोंख्या को सामने की प्लेट
या वनरीिक द्वारा बताई गई वकसी भी क्तस्थवत में उत्कीणय की जाएगी ।
(ii) प्रत्येक राज्य/सोंघ राज्य िेि के उपकरण को वनम्नवलक्तखत अिरो ोंद्वारा वचव्त वकया
जाएगा:
सारणी
हृम सों. राज्य/सोंघ राज्य िेि का नाम अिर
(1) (2) (3)
1. अोंडमान और वनकोबार द्वीप समूह ए & एन
2. आोंध्र प्रदेश एपी
3. अरुणाचल प्रदेश एआरपी
4. असम ए
5. वबहार बीआर
6. छत्तीसगा सीजी
7. दादरा और नगर हिेली डीएनएच
8. वदिी डी
9. गोिा जी
10. गुजरात जीटी
11. हररयाणा एचए
12. वहमाचल प्रदेश एचपी
13. जम्मू और कश्मीर जेके
14. झारखोंड जेएच
15. कनायटक के टीके
16. के रल के
17. लिद्वीप, वमवनकॉय और अमीनदीिी एलआई
द्वीप समूह[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 277
18. लद्दाख एलए
19. मध्यप्रदेश एमपी
20. महाराष्ट सर एमआर
21. मवणपुर एमए
22. मेघालय एमएल
23. नागालैंड एनएल
24. ओवडशा ओआर
25. पुदुच्चेरी पीिाई
26. पोंजाब पीआई
27. राजस्थान आरआई
28. तवमलनाडु टी
29. तेलोंगाना टीजी
30. विपुरा टीआर
31. उत्तर प्रदेश यूपी
32. उत्तराखोंड यूआर
33. पवश्चम बोंगाल डबल्ूबीएल
(ख) (i) विवशष्ट स अिरो ोंको एक सोंख्या के ऊपर उके रा जाएगा और िहाों से 64 वममी लोंबाई की एक
िैवतज रेखा से अलग वकया जाएगा।
(ii) अिर और अोंक 25 वममी की लोंबाई और उपयुि चौड़ाई के होगों े, बशते छोटे बॉयलरो ों के
मामले में मुख्य वनरीिक के वििेक पर वडिाइस के अिर और आोंकड़े लोंबाई में 10 वममी तक के
हो सकते हैं। पूरे उत्कीणयन को एक आयत में रखा जाएगा, वजसके ऊपरी और वनचले वहस्से अिरो ों
के शी य और नीचे की आकृ वत से हृमशः 76 वममी और 6 वममी स्पष्ट स होगों े, अलग होगों े जैसा वक
नीचे दशायया गया है:
उदाहरण -
एमआर
1234
(ग) छोटे औद्योवगक बॉयलरो ों के पोंजीकरण के मामले में, "एस" अिर को राज्य या सोंघ शावसत
िेिो ोंके वलए विवशष्ट स अिरो ोंके नीचे पोंजीकरण सोंख्या के उपसगय के रूप में जोड़ा जाएगा जैसा वक
नीचे दशायया गया है: -
यूपी
एस----
(घ) पार्श्य रेखाएों आोंकड़ो ों से समान दूरी पर स्पष्ट स होनी चावहए। उत्कीणयन की गहराई 0.4 वममी से
कम नही ोंहोनी चावहए।278 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) पोंजीकरण सोंख्या प्राप्त होने की तारीख से एक महीने के भीतर उत्कीणयन पूरा कर
वलया जाएगा और सत्यापन के वलए तैयार होगा, और इस अिवध के भीतर बॉयलर के मुख्य
वनरीिक को इस तथ्य की सूचना दी जाएगी।
(3)(क) वजन बॉयलरो ों के पोंजीकरण उपकरण यहाों वनधायररत उपकरणो ों से वभन्न हैं, उन्हें ऐसे
उपकरणो ों में बदल वदया जाना चावहए या काट वदया जाना चावहए और ऊपर वनधायररत वकए
गए अनुसार एक नया उत्कीणयन वकया जाना चावहए।
(ख) ऐसे बॉयलरो ोंकी मूल सोंख्या को नए उपकरण में रखा जाएगा, बशते वक बॉयलर के मामले
में जो वकसी राज्य या सोंघ शावसत िेि में पोंजीकृ त थे, जो अब विलुप्त हो गए हैं, एक नया नोंबर
राज्य या सोंघ शावसत प्रदेश द्वारा वदया जाएगा, जहाों बॉयलर चल रहा है। बॉयलर को आबोंवटत
कोई भी सोंख्या दूसरे बॉयलर के वलए पुन: उपयोग नही ोंकी जाएगी।
302. ताप सतह का मापन - (1) सुरिा िाल्व के िेि और पोंजीकरण और वनरीिण शुल्क
की रावश को विवनयवमत करने के वलए बॉयलर की "हीवटोंग सतह" एक तरफ गमी के सोंपकय में आने
िाली सभी प्लेटो ोंऔर ट्यूबो ोंकी कु ल सतह और दूसरी तरफ पानी पानी या आग के सोंपकय आने िाली
कु ल सतह, इन दोनो ोंमें जो भी अवधक हो, उसे माना जाता है।
(2)(क) लोंकाशायर और कॉवनयश बॉयलरो ों के वलए, कु ल ताप सतह एोंड प्लेटो ों के बीच भवट्टयो ों
की गीली सतह, हृॉस ट्यूबो ों की आग की सतह जहाों वफट होती है और साइड फ़्लू किर के
नीचे बाहरी शेल का वहस्सा शावमल होगा। िेिो ोंका आकलन करने में भवट्टयो ोंको सादे वसलेंडरो ों
के रूप में माना जाएगा, उनकी गीली सतह के िेि को उनकी औसत बाहरी पररवध X के रूप
में वलया जाएगा जो एोंड प्लेटो ों के बीच बॉयलर की लोंबाई है। शेल के वलए वग्रप किर के नीचे
की पररवध के उस वहस्से की चौड़ाई = 2D और इस चौड़ाई को एोंड प्लेटो ोंके बीच की लोंबाई से
गुणा करने पर शेल ताप सतह के िेि के रूप में वलया जाएगा।
(ख) गमी के सोंपकय में आने िाली बैक एोंड प्लेट की सतह के वहस्से को गणना से हटा वदया
जाएगा।
उदाहरण - लोंकाशायर बॉयलर, वजसमें हृॉस ट्यूब के वबना सादा भवट्टयाों हैं, उसकी कु ल ताप
सतह का सूि वनम्न प्रकार है: -
ताप सतह, िगय मीटर में =2 L (3.14 d + D)। "L" एोंड प्लेटो ों के बीच बॉयलर की
लोंबाई है, मीटर में, "d" भवट्टयो ोंका माध्य बाहरी व्यास है, मीटर में और "D" शेल के सबसे बड़े
बेल्ट् का आोंतररक व्यास है, मीटर में।
(3)(क) िॉटर ट्यूब बॉयलरो ोंभाप या पानी के डरम के वलए डरम की ताप सतह बाहरी पररवध के
आधी को बाहरी विक िाल या हृॉस बोक्सेस के बीच के डरम के स्पष्ट स लोंबाई जैसा भी मामला हो
से गुणा वकया जाएगा।
(ख)ट्यूब प्लेट या हीटर के बीच ट्यूबो ों की बाहरी सतह को ट्यूबो ों की ताप सतह के रूप में
वलया जाएगा।
(ग) हीटर की ताप सतह को गणना से हटा वदया जाएगा।
(4)(क) फायर-ट्यूब के मरीन बॉयलरो ोंके प्रकार के वलए ताप सतह में ट्यूब प्लेटटस (लोंकाशायर
बॉयलरो ों के वलए उसी तरह माना जाता है), दहन किो ों की गीली सतह (कम िेि) के बीच[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 279
भवट्टयो ों की गीली सतह शावमल होगी। ट्यूब के छेद और ट्यूब प्लेटो ों के बीच ट्यूबो ों की गीली
सतह।
(ख) गमी के सोंपकय में आने िाली सामने की ट्यूब प्लेट के वहस्सो ों को गणना से हटा वदया
जाएगा।
(5) (क) लोकोमोवटि प्रकार के बॉयलरो ोंके वलए ताप सतह में फाउोंडेशन ररोंग के ऊपर फायर-
बॉक्स की गीली सतह (ट्यूब के छेद और फायर होल और ररोंग का िेि) और ट्यूब प्लेटो ों के
बीच ट्यूबो ोंकी गीली सतह शावमल होगी।
(ख) स्भोक बॉक्स ट्यूब प्लेट को गणना से हटा वदया जाएगा।
(6) साधारण प्रकार के ऊध्वायधर बॉयलरो ों के वलए, ताप सतह मुख्य चहारदीिारी (घटा
फायर होल और ररोंग और ट्यूब छेद का िेि घर अगर कोई हो) के ऊपर आग बॉक्स से गीली
सतह और वकसी भी पार की सतह या अन्य ट्यूब और गेज ग्लास में वदखाए गए वनम्नतम िॉटर
स्तर से नीचे का उठाि शावमल होगा।
(7) इलेररोड बॉयलरो ों के वलए ताप सतह की गणना, वनम्नवलक्तखत सूिो ों के अनुसार की
जाएगी:
ताप सतह = E/6
जहाों ,
E = सामान्य भार के तहत 100 वडग्री सेक्तियस पर समान िाष्पीकरण , जो X वकलो
िॉट
वकलो िॉट = जब वनवदयष्ट स मािा में बॉयलर में पानी का 65 वडग्री सेक्तियस पर विवशष्ट स
प्रवतरोध 200 ओम प्रवत इोंच ट्यूब हो और जब बॉयलर अपने वडजाइन दबाि पर 15 वडग्री
सेक्तियस तापमान के फीड िॉटर पर भाप का सामान्य उत्पादन दे हो उस समय अिशोव त
वकलोिाट।
(8) ताप सतह की गणना में स्टे आवद के वलए कोई कटौती नही ोंकी जाएगी।
(9) अन्य ताप सतहें, वजनके वि य में पूिोि अनदेशो ों में कोई प्रािधान नही ोंवकया गया है
उनकी गणना के वलए उसी सामान्य प्रवहृया का पालन वकया जाएगा।
303. बॉयलर रेवटंग - बॉयलर रेवटोंग, विवनयम 302 के तहत वनधायररत बॉयलर की ताप सतह में िगय
मीटरो ोंकी सोंख्या (वनकटतम पूणय सोंख्या तक) होगी ।
304. पंजीकरण शुल्क – (1) अवधवनयम की धारा 12 की उप-धारा (2) के तहत पोंजीकरण के वलए
आिश्यक शुल्क इस विवनयम की तावलका 8 / 2 के अनुसार होगा।
बशते मुख्य वनरीिक यह वनदेश दे सकता है वक अवधवनयम की धारा 19 की उप-धारा (2) के
अनुसरण में वकए गए नए आिेदन के सोंबोंध में कोई शुल्क देय नही ोंहोगा।
(1) अलग-से फायर वकए गए सुपर-हीटर के वलए वनरीिण शुल्क, री-हीटर और
इकोनॉमाइजर को पोंजीकरण शुल्क के समान दर पर वलया जाएगा।280 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) वफों ड ट्यूबो ों के साथ हीट ररकिरी स्टीम जेनरेटर के वलए, शुल्क की गणना खाली
ट्यूबो ों के ताप सतह िेि और वफनो ों के ताप सतह िेि के एक चौथाई वहस्से पर की
जाएगी।
तावलका 8/2
पंजीकरण शुल्क (विवनयम 304)
हृम सों. बॉयलर रेवटोंग शुल्क (रुपए में)
(1) (2) (3)
1 अध्याय - 14 के अनुसार छोटे औद्योवगक बॉयलरो ोंके वलए और अध्याय - 1200
17 के अनुसार छोटे सौर बॉयलरो ोंके वलए
2 बॉयलर रेवटोंग 10 िगय मीटर से अवधक नही ोंहोने पर 1800
3 बॉयलर रेवटोंग 10 िगय मीटर से अवधक लेवकन 30 िगय मीटर से अवधक नही ों 2400
होने पर
4 बॉयलर रेवटोंग 30 िगय मीटर से अवधक लेवकन 50 िगय मीटर से अवधक नही ों 2700
होने पर
5 बॉयलर रेवटोंग के वलए 50 िगय मीटर से अवधक लेवकन 70 िगय मीटर से 3300
अवधक नही ोंहोने पर
6 बॉयलर रेवटोंग 70 िगय मीटर से अवधक लेवकन 90 िगय मीटर से अवधक नही ों 3900
होने पर
7 बॉयलर रेवटोंग 90 िगय मीटर से अवधक लेवकन 110 िगय मीटर से अवधक 4500
नही ोंहोने पर
8 बॉयलर रेवटोंग 110 िगय मीटर से अवधक लेवकन 200 िगय मीटर से अवधक 5100
नही ोंहोने पर
9 बॉयलर रेवटोंग 200 िगय मीटर से अवधक लेवकन 400 िगय मीटर से अवधक 5700
नही ोंहोने पर
10 बॉयलर रेवटोंग 400 िगय मीटर से अवधक लेवकन 600 िगय मीटर से अवधक 6600
नही ोंहोने पर
1 1 बॉयलर रेवटोंग 600 िगय मीटर से अवधक लेवकन 800 िगय मीटर से अवधक 7200
नही ोंहोने पर
12 बॉयलर रेवटोंग 800 िगय मीटर से अवधक लेवकन 1000 िगय मीटर से अवधक 8100
नही ोंहोने पर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 281
13 बॉयलर रेवटोंग 1000 िगय मीटर से अवधक लेवकन 1200 िगय मीटर से 9600
अवधक नही ोंहोने पर
14 बॉयलर रेवटोंग 1200 िगय मीटर से अवधक लेवकन 1400 िगय मीटर से 10800
अवधक नही ोंहोने पर
15 बॉयलर रेवटोंग 1400 िगय मीटर से अवधक लेवकन 1600 िगय मीटर से 12600
अवधक नही ोंहोने पर
16 बॉयलर रेवटोंग 1600 िगय मीटर से अवधक लेवकन 1800 िगय मीटर से 13500
अवधक नही ोंहोने पर
17 बॉयलर रेवटोंग 1800 िगय मीटर से अवधक लेवकन 2000 िगय मीटर से 15000
अवधक नही ोंहोने पर
18 बॉयलर रेवटोंग 2000 िगय मीटर से अवधक लेवकन 2200 िगय मीटर से 16200
अवधक नही ोंहोने पर
19 बॉयलर रेवटोंग के वलए 2200 िगय मीटर से अवधक लेवकन 2400 िगय मीटर 18000
से अवधक नही ोंहोने पर
20 बॉयलर रेवटोंग के वलए 2400 िगय मीटर से अवधक लेवकन 2600 िगय मीटर 18900
से अवधक नही ों
21 बॉयलर रेवटोंग के वलए 2600 िगय मीटर से अवधक लेवकन 2800 िगय मीटर 20400
से अवधक नही ों
22 बॉयलर रेवटोंग के वलए 2800 िगय मीटर से अवधक लेवकन 3000 िगय मीटर 21600
से अवधक नही ों
23 3000 िगय मीटर से अवधक बॉयलर रेवटोंग होने पर 21600+ 600,
प्रत्येक 200 िगय
मीटर या उसके
भाग के वलए
नोट: राज्य सरकारें, राजपि में अवधसूचना द्वारा, अवधवनयम की धारा 42 की उप-धारा (1) के खोंड (ख)
के अनुसार शुल्क वनधायररत करने के वलए वनयम बना सकती है, जो प्रभािी होगा।
305. प्रमाणपत्र के निीनीकरण के वलए वनरीिण शुल्क – (1) एक आिेदन के साथ आिश्यक
शुल्क, अवधवनयम की धारा 13 की उप - धारा (3) के तहत तावलका 8 / 3 के अनुसार होगा।
बशते मुख्य वनरीिक यह वनदेश दे सकता है वक अवधवनयम की धारा 19 की उप-धारा (2) के
अनुसरण में वकए गए नए आिेदन के सोंबोंध में कोई शुल्क देय नही ोंहोगा।
(2) अलग से फायर वकए गए सुपर-हीटर, री-हीटर और फीड िॉटर हीटर के वलए वनरीिण
शुल्क समान दर पर िसूल वकया जाएगा।282 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) वफों ड ट्यूबो ों के साथ हीट ररकिरी स्टीम जेनरेटर के वलए, शुल्क की गणना खाली ट्यूबो ों के
ताप सतह के िेि और पोंखो ोंके ताप सतह िेि के एक चौथाई वहस्से पर की जाएगी।
(4) मावलक के अनुरोध पर छह महीने या उससे कम अिवध के वलए प्रमाण पि के निीनीकरण
के वलए, लागू शुल्क का आधा देय होगा।
(5) खराब बॉयलर के मरम्मत कायय पूणय होने के बाद पुन: वनरीिण के वलए पुन: लागू शुल्क देय
होगा।
(6) विवनमेय लेखपि अवधवनयम, 1881 (1881 का 26) के तहत मावलक के अनुरोध पर रवििार
और साियजवनक अिकाश के वदन वनरीिण के वलए लागू शुल्क के आधे के बराबर अवतररि
शुल्क देय होगा।
तावलका 8 / 3
प्रमाणपत्र के निीनीकरण के वलए वनरीिण शुल्क (विवनयमन 305)
हृम बॉयलर रेवटोंग शुल्क
सों. रुपए में
(1) (2) (3)
1 अध्याय - 14 के अनुसार छोटे औद्योवगक बॉयलरो ोंके 1000
वलए और अध्याय - 17 के अनुसार छोटे सौर बॉयलरो ोंके वलए
2 बॉयलर रेवटोंग 10 िगय मीटर से अवधक नही ोंहोने पर 1600
3 बॉयलर रेवटोंग 10 िगय मीटर से अवधक लेवकन 30 िगय मीटर से अवधक 2100
नही ोंहोने पर
4 बॉयलर रेवटोंग 30 िगय मीटर से अवधक लेवकन 50 िगय मीटर से अवधक 2400
नही ोंहोने पर
5 बॉयलर रेवटोंग 50 िगय मीटर से अवधक लेवकन 70 िगय मीटर से अवधक 2700
नही ोंहोने पर
6 बॉयलर रेवटोंग 70 िगय मीटर से अवधक लेवकन 90 िगय मीटर से अवधक 3400
नही ोंहोने पर
7 बॉयलर रेवटोंग 90 िगय मीटर से अवधक लेवकन 110 िगय मीटर से अवधक 4000
नही ोंहोने पर
8 बॉयलर रेवटोंग 110 िगय मीटर से अवधक लेवकन 200 िगय मीटर से अवधक 4500
नही ोंहोने पर
9 बॉयलर रेवटोंग 200 िगय मीटर से अवधक लेवकन 400 िगय मीटर से अवधक 5000
नही ोंहोने पर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 283
10 बॉयलर रेवटोंग 400 िगय मीटर से अवधक लेवकन 600 िगय मीटर से अवधक 5800
नही ोंहोने पर
1 1 बॉयलर रेवटोंग 600 िगय मीटर से अवधक लेवकन 800 िगय मीटर से अवधक 6300
नही ोंहोने पर
12 बॉयलर रेवटोंग 800 िगय मीटर से अवधक लेवकन 1000 िगय मीटर से 7100
अवधक नही ोंहोने पर
13 बॉयलर रेवटोंग 1000 िगय मीटर से अवधक लेवकन 1200 िगय मीटर से 8400
अवधक नही ोंहोने पर
14 बॉयलर रेवटोंग 1200 िगय मीटर से अवधक लेवकन 1400 िगय मीटर से 9500
अवधक नही ोंहोने पर
15 बॉयलर रेवटोंग 1400 िगय मीटर से अवधक लेवकन 1600 िगय मीटर से 11100
अवधक नही ोंहोने पर
16 बॉयलर रेवटोंग 1600 िगय मीटर से अवधक लेवकन 1800 िगय मीटर से 11900
अवधक नही ोंहोने पर
17 बॉयलर रेवटोंग 1800 िगय मीटर से अवधक लेवकन 2000 िगय मीटर से 13200
अवधक नही ोंहोने पर
18 बॉयलर रेवटोंग 2000 िगय मीटर से अवधक लेवकन 2200 िगय मीटर से 14300
अवधक नही ोंहोने पर
19 बॉयलर रेवटोंग 2200 िगय मीटर से अवधक लेवकन 2400 िगय मीटर से 15800
अवधक नही ोंहोने पर
20 बॉयलर रेवटोंग 2400 िगय मीटर से अवधक लेवकन 2600 िगय मीटर से 16600
अवधक नही ोंहोने पर
21 बॉयलर रेवटोंग 2600 िगय मीटर से अवधक लेवकन 2800 िगय मीटर से 18000
अवधक नही ोंहोने पर
22 बॉयलर रेवटोंग 2800 िगय मीटर से अवधक लेवकन 3000 िगय मीटर से 19000
अवधक नही ोंहोने पर
23 बॉयलर रेवटोंग 3000 िगय मीटर से अवधक होने पर 19000 + 500
प्रत्येक 200 िगय
मीटर या उसके
भाग के वलए
306 . वनरीिण पुल्पिका ज्ञापन - (1) प्रत्येक बॉयलर के वलए प्रपि- XI में एक वनरीिण पुक्तस्तका
ज्ञापन तैयार वकया जाएगा और वनरीिक इस पुस्तक में हाईडरॉवलक परीिण और स्टीम परीिण और
उसके वनरीिण नोटो ों के वििरण के साथ बॉयलर के सभी वििरणो ों और आयामो ों को वलक्तखत में दजय
करेगा;284 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) बाद के वनरीिण में जब उन पर वटप्पणी की गई हो ों तो सिम व्यक्ति, वनरीिण,
हाईडरॉवलक परीिण और भाप परीिण की तारीखो ोंको दजय करेगा;
(3) वनरीिक या सिम व्यक्ति, जैसा भी मामला हो, को वनरीिण पुक्तस्तका के ज्ञापन में
बॉयलर की सामान्य क्तस्थवत और उसकी मरम्मत भी दजय करनी चावहए, साथ ही बॉयलर में से
ईोंट के वहस् सो ोंको वकस हद तक साफ वकया गया है, मरम्मत के वनरीिण, मुख्य भाप पाइपो ोंके
वनरीिण, सभी आकक्तस्भक दौरो ोंऔर दुघयटनाओ ों से सोंबोंवधत ररपोटें भी होनी चावहए;
(4) (क) नए पोंजीकृ त बॉयलरो ों के मामले में, मुख्य वनरीिक ज्ञापन पुक्तस्तका जमा
करने पर सभी वििरणो ों और गणनाओ ों की जाोंच करेंगे और वजस वडजाइन
प्रेशर की अनुमवत देनी है उसे वीकीकृ त करेंगे।
(ख) पुराने बॉयलरो ोंके मामले में, मुख्य वनरीिक, वनरीिक की वनरीिण वटप्पवणयो ों और
मरम्मत या दबाि में कमी के वलए वकए गए प्रस्तािो ोंकी जाोंच करेंगे।
(ग) मुख्य वनरीिक के वलक्तखत प्रावधकार के वबना बॉयलर के वलए वीकीकृ त प्रेशर में
पररितयन नही ोंवकया जाना चावहए।
(घ) वनरीिण पुक्तस्तका ज्ञापन साफ सुथरी और अद्यवतत रखी जाएगी और जब तक सिम
व्यक्ति को िास्ति में इसकी आिश्यकता हो, तब तक वनरीिण पुक्तस्तका को, मुख्य
वनरीिक के कायायलय में रखा जाएगा।
307 . पंजीकरण पुल्पिका - (1) पोंजीकरण के वलए आिश्यक सभी वििरण िाली एक
पोंजीकरण पुक्तस्तका या वनरीिण ज्ञापन पुक्तस्तका की प्रवत मुख्य वनरीिक के कायायलय में प्रपि-
XI में रखी जाएगी और बॉयलर के सोंबोंध में उनके द्वारा पाररत वकसी भी आदेश को पोंजीकरण पुक्तस्तका
में उसके आद्यािर से दजय वकया जाएगा।
(2) मुख्य वनरीिक को यह भी देखना होगा वक वनरीिण ज्ञापन पुक्तस्तका में दजय वकए गए
बाद के वनरीिणो ोंके नोट पोंजीकरण पुस्तक में कॉपी वकए गए हैं।
308. अवभलेखो ंका रखरखाि - (1) वनरीिण प्रावधकारी बॉयलर या इकोनोमाइजर, जैसा
भी मामला हो, से सोंबोंवधत ररकॉडय, वजसमें वनधायररत प्रपिो ों में सभी प्रमाण पि शावमल होगों े,
अथायतट प्रपि-I (भाग-ख), प्रपि-I(भाग-ग), प्रपि-IV(भाग-क), प्रपि-IV(भाग-ख), प्रपि-
IV(भाग-ग), प्रपि-IV(भाग-घ), प्रपि-V(भाग-क) तथा प्रपि-XVI और बॉयलर के पोंजीकरण
के बाद कम से कम 3 साल की अिवध के वलए वीकीकृ त डराइोंग की प्रवतयाों बनाए रखेगा। इसके
बाद इन अवभलेखो ोंको वनरीिण प्रावधकारी द्वारा बॉयलर के मावलक को भेजा जा सकता है।
(2) एक बॉयलर के इकोनोमाइजर का मावलक बॉयलर या इकोनोमाइजर जैसा भी मामला
हो से सोंबक्तित अवभलेख वजसमें प्रपि-I (भाग-ख), प्रपि-I (भाग-ग), प्रपि-IV (भाग-ख), प्रपि-
IV (भाग-ग), प्रपि-V (भाग-क), और प्रपि-XV में प्रमाण पि और बॉयलर या इकोनोमाइजर
का कायायिवध के पूरे कायायिवध के वलए जैसा भी मामला हो अनुमोवदत डराइोंग की प्रवतयाों
शावमल हैं को बनाए रखेगा ।
(3) वीकावमत्व हस्ताोंतरण की वकसी भी की क्तस्थवत में, ऊपर िवणयत अवभलेख, नए मावलक
को स्थानाोंतररत कर वदए जाएोंगे और नया मावलक, उपरोि उप-विवनयमन (2) के प्रािधान के
अनुसार अवभलेख रखेगा।
(4) बॉयलर या एकोनोमाइजर या भाप पाइप के वनमायता, प्रपि-I (भाग-ख), प्रपि-I (भाग-
ग), प्रपि-IV (भाग-ख), प्रपि-IV (भाग-ग), प्रपि-IV (भाग-ग), प्रपि-IV (भाग-घ), प्रपि-V[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 285
(भाग-क), प्रपि-V (भाग-ख), प्रपि-XV, और प्रपि-XVI के प्रमाणपि और अनुमोवदत डराइोंग
की प्रवतयाों, कम से कम 5 ि ों की अिवध के वलए बनाए रखने सवहत बॉयलर या
इकोनोमाइजर या भाप पाइप, जैसा भी मामला हो, से सोंबोंवधत अवभलेख बनाए रखेगा।
309 . वनरीिण पुल्पिका ज्ञापन और पंजीकरण पुिक का थानांतरण - एक बॉयलर एक राज्य
से दूसरे में हस्ताोंतरण पर, वनरीिण ज्ञापन पुक्तस्तका और पोंजीकरण पुक्तस्तका, उस राज्य के मुख्य
वनरीिक, जहाों के वलए बॉयलर स्थानाोंतररत वकया गया है, के अनुरोध पर, उस अवधकारी के वलए
अग्रेव त कर वदया जाएगा और िह उन्हें अपनी वहफाजत में लेगा और उनका रख-रखाि करेगा।
310.प्रमाणपत्र प्रदान करना – (1) बॉयलर के उपयोग के वलए प्रमाण पि प्रपि-XII में वदया जाएगा।
(2) प्रमाण पि में , वडजाइन दबाि, वजस पर बॉयलर काम में वलया जाएगा, लोड सुरिा िाल्व
डाला जाने िाला िजन या िाशर की मोटाई या अवधक भार के क्तखलाफ फै रूि के
आिश्यकता और बॉयलर के वपछले हाईडरॉवलक परीिण के दबाि और तारीख को दजय
वकया जाएगा ।
(3) वनरीिक की वटप्पणी यथासोंभि सोंविप्त होगी।
311. थावपत बॉयलरो ं के वनरीिण की प्रवहृया – (1) (क) बॉयलर के सभी वहस्सो ों को बाहर और
अोंदर से पहुाँच योग्य, खुला और वनरीिण योग्य और वनरीिण के वलए ठीक से तैयार रखना आिश्यक
है।
(ख) सभी बॉयलरो ों में द्वार होता है वजसके माध्यम से एक जाोंच की जा सकती है और
वजसके वलए सोंचालन बोंद होता है; ऐसे सभी भागो ोंचाहे पानी की सतहो,ों या हीटर की सतहो ों
तक पहुोंच के वलए के वलए खोला जाएगा।
(ग) वनरीिण या मरम्मत के वलए बॉयलर को ठोंडा करते समय, बॉयलर को नुकसान से बचाने
के वलए पानी को तब तक नही ोंवनकालना चावहए जब तक वक सेवटोंग पयायप्त रूप से ठोंडा
न हो जाए और जब सोंभि हो तो वीकाभाविक रूप से ठोंडा होने दें।
(घ) सामान्य वििेक का पालन करने के वलए, बॉयलर के इन्ऱुलेशन सामग्री, वचनाई, या वनवश्चत
भागो ों को हटाने की आिश्यकता नही ों है, जब तक वक बॉयलर के सुलभ भागो ों में कु छ
प्रकार के दो या वगरािट का सोंदेह न हो और जहाों नमी या िाष्प हो किररोंग हटा करके
देखना चावहए और एक बार में पूरी जाोंच की जानी चावहए।
(ङ) बॉयलर के बाहरी वहस्सो ों में सीवटोंग ब्लॉक पर विशे ध्यान वदया जाएगा, खासकर जब
क्तस्थवत नम हो। पहले वनरीिण, और यवद सिम व्यक्ति उन वहस्सो ों की क्तस्थवत के बारे में
सोंतुष्ट स नही ों होता है तो, उवचत अिवध में बाद के वकसी वनरीिण के दौरान, लोकोमोवटि
प्रकार के बॉयलरो ों के सैडल टैंक और इोंजन वफवटोंग के नीचे के वहस्सो ों को सुविधा के वलए
हटा वदया जाएगा।
(च) पयायप्त दृश्य साक्ष्य या पुराना होने या अन्य कारणो ों से सोंदेह होने पर, सही क्तस्थवत का पता
लगाने के वलए हर सोंभि प्रयास वकया जाएगा, यहाों तक वक बॉयलर के इन्ऱूलेट सामग्री,
वचनाई या वनवश्चत भागो ों को हटाना भी। कभी-कभी इस क्तस्थवत को सकारात्मक रूप से
वनधायररत करने के वलए भागो ों की वडरवलोंग करना या काटना उवचत और आिश्यक होता
है।
(2) सिम व्यक्ति, जब भी आकार इसकी अनुमवत दे, इसके अोंदर जाएगा और इसके सभी
आोंतररक भागो ों का गहन वनरीिण करेगा। ऐसा करने से पहले, उसे वनवश्चत रूप से खुद
को सोंतुष्ट स करेगा वक भाप के तहत वकसी अन्य बॉयलर से बॉयलर को वडस्कनेर करने के286 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वलए उवचत प्रािधान वकया गया है। यवद उसे पता चलता है वक वडस्कनेक्शन के वलए
उवचत प्रािधान नही ों वकया गया है या बॉयलर को ठीक से साफ नही ों वकया गया है, या
स्के ल नही ों वकया गया है, या िह अनुवचत रूप से गमय है, तो उसे वनरीिण के साथ आगे
बाने से इनकार करेगा और वनरीिण प्रावधकारी या मुख्य वनरीिक को, जैसा भी मामला
हो, आदेश के वलए तथ्यो ों की ररपोटय करनी चावहए। जब बॉयलर इतने आकार का हो या
उसका विवनमायण ऐसा हो वक सिम व्यक्ति उसके अोंदर नही ोंजा सकता है, तो उसे मुख्य
आोंतररक भागो ोंको देखने के योग्य बनाने के वलए पयायप्त दृवष्ट स छेद या हैंड होल प्रदान वकए
जाने चावहए; यवद बॉयलर का कोई महत्वपूणय भाग इस प्रकार बनाया गया है वक सिम
व्यक्ति उसकी जाोंच नही ों कर सकता है, तो उसे आदेश के वलए वनरीिण प्रावधकारी या
मुख्य वनरीिक को, जैसा भी मामला हो, तथ्यो ोंकी सूचना प्रदान करनी चावहए।
(3) अवीकाभाविक पररसोंचरण और अवीकाभाविक प्रिाह बॉयलरो ों के मामले में जो वनकट दृश्य
वनरीिण के वलए सुलभ नही ोंहैं, सिम व्यक्ति को पूरी तरह से जाोंच के अलािा, पानी के
प्रिाह से सुवनवश्चत करना चावहए वक क्या पानी के सवकय ट के सभी िगों के माध्यम से उवचत
पररसोंचरण बनाए रखा जाता है।
(4)(क) बॉयलर में प्रिेश करने पर, सिम व्यक्ति पानी, ऑयल स्के ल सॉल्वेंटटस, या अन्य
पदाथों, जो जाने अनजाने में फ़ीड पानी के साथ चले गए हैं के उपयोग के कारण पहले िाले
प्रभाि का वनरीिण करने के वलए खुली धातु की सभी सतहो ोंकी जाोंच करेगा। थोड़ा-सा भी तेल
खतरनाक है, और बॉयलर में तेल के वकसी भी प्रिेश को रोकने के वलए तत्काल कदम उठाए
जाएोंगे।
(ख) िाटर-ट्यूब बॉयलरो ों की ट्यूबो ों में या वकसी बॉयलर की आग िाली प्लेटो ों पर तेल या
स्के ल विशे रूप से खराब होता है, वजससे िे अक्सर फट जाते हैं।
(5) एक सीम के साथ या नजदीक लगा हुआ एक वनवश्चत मािा का कोरोजन, ठोस प्लेट में
सीम से दूरस्थ स्थान पर लगी कोरोजन की समान मािा से अवधक गोंभीर है। सीम के साथ
लम्बित ग्रूविोंग विशे रूप से महत्वपूणय है या दरारें होने की सोंभािना है जब सामग्री दबाि के
अधीन हो। उन वबोंदुओ ों पर गोंभीर िरण होने की सोंभािना है, जहाों पानी का सोंचलन खराब है
और सोंिारक कारयिाई के साक्ष्य के वलए ऐसे स्थानो ों की सबसे सािधानीपूियक जाोंच की
जाएगी।
(6) यवद सिम व्यक्ति यह वनणयय लेता है वक बॉयलर के एक या अवधक भागो ों में अब इसके वलए
वीकीकृ त दबाि के वलए उपयुि नही ोंहै, तो िह वबना देर वकए मुख्य वनरीिक को दबाि कम करने के
अपने प्रस्ताि की ररपोटय करेगा, और साथ ही साथ दबाि के अनुमोदन के वलए खराब पुजों की अपनी
गणना प्रस्तुत करनी चावहए।
(7) शेल प्लेटो ों की वपवटोंग और िेस्ट होने के सोंबोंध में, सिम व्यक्ति यह ध्यान रखेगा वक
शेल प्लेटें मोटाई में काफी हद तक कम हो सकती हैं और वफर भी लम्बित सीम से अवधक
मजबूत हो सकती हैं।
(8) (क) सभी फ्लैंवजोंग विशे रूप से सकुय लर और प्लेटो ों के फ्लेंज जो रुके नही ोंहैं उनका पूरी
तरह से वनरीिण वकया जाना चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 287
(ख) इस तरह के वसरो ों के पवट्टका में आोंतररक ग्रूविोंग और वसर की बाहरी सतहो ों में बाहरी
ग्रूविोंग दबाि के वलए बहुत आम है क्योवोंक इस प्रकार के वसरो ों में मामूली गवत होती है जो
इस तरह के दो पैदा करती है। कु छ प्रकार के बॉयलरो ों में उनके कु छ वहस्सो ों जो सामने
वदखाई नही ोंदेते उनमें में कु छ ऐसा होता है वजसे ओजी या ररिसय फ्लैंज वनमायण के रूप में
जाना जाता है, लेवकन क्तस्थवत एक दपयण के सक्तम्मलन द्वारा वनधायररत की जाएगी जो आाँख
पर एक उवचत कोण पर िापस प्रवतवबोंवबत होगी। ऐसी जगह, का इस प्रकार या वकसी
अन्य व्यिहायय तरीके से क्तस्थवत पर नजर रखें।
(9) (क) सभी स्टे, चाहे विकणय या आर-पार के हो,ों की जाोंच की जाएगी वक िे सभी समान
तनाि में हैं।
(ख) सभी जोड़े जाने िाले वसरो ोंकी जाोंच की जाएगी वक कही ोंदरारें हैं या नही,ों जहाों स्टे, पोंच
या वडरल वकए गए हैं या ररिेटटस या बोल्ट् हैं, और यवद ये उवचत तनाि में नही ोंपाए जाते हैं
तो सिम व्यक्ति उनके उवचत एडजस्टमेंट की वसफाररश
करेगा।
(10) (क) एक बॉयलर में फ्लैंज या स्क्रू वकए गए मैनहोल और अन्य रीइोंफोवसिंग प्लेट,
नॉलज या अन्य जोड़ो ों के आोंतररक और साथ ही बाहरी रूप से यहा देखने के वलए जाोंच
की जाएगी, वक िे हृै क या विकृ त तो नही ोंहैं, और जहाों भी सोंभि हो, उस सोंपूणयता के साथ
वजसके साथ उसके पाइप कनेक्शन बॉयलर से बने हैं को परखने के वलए बॉयलर के
अोंदर का अिलोकन वकया जाना चावहए।
(ख) बाहरी घटको ों के सभी खुले स्थान, जैसे पानी के कॉलम के कनेक्शन, सूखे पाइपो ों और
सुरिा िाल्वो ों में खुले स्थानो ों पर यह देखने के वलए ध्यान वदया जाना चावहए वक िे रुकािट
रवहत हो।ों
(11) (क) आग के सोंपकय में आने िाली प्लेट या ट्यूब की सतह पर विशे ध्यान वदया जाना
चावहए । सिम व्यक्ति यह वनरीिण करेगा वक क्या बॉयलर का कोई वहस्सा ऑपरेशन के
दौरान बक्तजोंग या क्तब्लस्टररोंग द्वारा विकृ त हो गया है; बक्तजोंग जहाों होता है, यह प्लेट या ट्यूब
की पूरी मोटाई का विरूपण है, जबवक क्तब्लस्टररोंग प्लेट के घूमने से पहले उसके इोंगोट में
अनचाही सामग्री के लगे होने के कारण प्लेट का लैवमनेशन या पृथक्करण होता है।
(ख) यवद बक्तजोंग या क्तब्लस्टसय, ऐसे आकार के हैं, जो प्लेट या ट्यूब को गोंभीर रूप से कमजोर
कर देते हैं और विशे रूप से जब उन कवमयो ों से ररसाि नोट वकया जाता है, तो बॉयलर को
सेिा से तब तक बोंद कर वदया जाएगा जब तक वक दो पूणय भाग या भागो ों की उवचत मरम्मत
न हो जाए।
(ग) बॉयलर सोंरचनाओ,ों विशे रूप से सीम और ट्यूब के वसरो ोंके आसपास के वकसी भी वहस्से
से ररसाि का पता लगाने के वलए सािधानीपूियक अिलोकन वकया जाना चावहए।
(घ) फायर ट्यूब पर कभी-कभी क्तब्लस्टसय होते हैं, लेवकन शायद ही कभी वगरते हैं, सिम व्यक्ति
ऐसे दो ो ों के वलए ट्यूबो ों को देखेगा और यवद िे पयायप्त विकृ वत के साथ पाए जाते हैं, तो उन्हें
हटाया जाएगा।
(12) (क) लैप ज्वाइोंट बॉयलसय उन जगहो ों पर दरार होने के वलए उपयुि हैं जहाों प्लेटटस
लम्बित या सीधे सीम में लैप करते हैं; यवद इस वबोंदु पर ररसाि या अन्य सोंकट का कोई सबूत
है, तो इसकी पूरी तरह से जाोंच की जाएगी और यवद आिश्यक हो तो ररिेटटस को हटा वदया
जाएगा या यह वनधायररत करने के वलए प्लेट को हटा वदया जाएगा वक क्या सीम में दरारें मौजूद
हैं। शेल प्लेटो ों में नोट की गई कोई भी दरार आमतौर पर खतरनाक होती है, वसिाय आग की
दरारो ोंके जो प्लेट के वकनारे से गथय सीम के ररिेट छेद में चलती हैं ।288 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) आमतौर पर ऐसी आग की दरारो ोंकी सीवमत सोंख्या बहुत गोंभीर मामला नही ोंहै।
(13) सिम व्यक्ति प्रत्येक बोल्ट् के एक एोंड को हथौड़े से टैप करके स्टे बोल्ट् का परीिण
करेगा और जब सोंभि हो तो परीिण को और अवधक प्रभािी बनाने के वलए विपरीत एोंड पर
एक हथौड़ा या अन्य भारी उपकरण रखा जाएगा।
(14) (क) (i) हॉररजॉन्टल फायर ट्यूब बॉयलरो ों में ट्यूब आग की ओर वसरो ोंपर अवधक तेजी
से खराब होती हैं, और उनकी बाहरी सतह पर हल्के हथौड़े से सािधानीपूियक टैप वकया
जाएगा, तावक यह पता लगाया जा सके क्या उनकी मोटाई में गोंभीर कमी आई है या नही।ों
(ii) पानी के सोंरिण के वबना दहन के उत्पादो ोंके सोंपकय में आने पर ट्यूब या ऊध्वायधर ट्यूबलर
बॉयलर ऊपरी खुले एोंड पर खराब होने की दृवष्ट स से अवतसोंिेदनशील होते हैं।
(iii) जहाों तक सोंभि हो, या तो हैंड होि यवद कोई हैं, तो उनके माध्यम से, या वसरो ों से
वनरीिण वकया जाएगा।
(ख) (i) उभार या दरारें, या वकसी सबूत या दो पूणय िेल्ड का पता लगाने के वलए सतहो ों
की सािधानीपूियक जाोंच की जानी चावहए।
(ii) जहाों एक मजबूत डराफ्ट होता है, ईोंधन और राख के इोंवपगमेंट या कणो,ों या सूट-
ब्लोिर के अनुवचत उपयोग से उत्पन्न कोरोजन से ट्यूब पतले हो सकते हैं।
(iii) ट्यूब से ररसाि अक्सर इसके आसपास के कई ट्यूबो ों पर गोंभीर सोंिारक प्रभाि
का कारण बनता है।
(ग) (i) जहाों डरम या हेडर को जोड़ने में शॉटय ट्यूब या वनप्पल लगाए जाते हैं, िहाों भट्ठी
के अपवशष्ट स उत्पादो ों के एकि होने िाले वबोंदुओ ों में रहने की प्रिृवत्त होती है और नमी
मौजूद होने पर इस तरह के जमा से कोरोजन की सोंभािना होती है।
(ii) ऐसे सभी स्थानो ों को अच्छी तरह से साफ वकया जाएगा और जाोंचा
जाएगा।
(15) (i) सभी प्रकार के फायर-ट्यूब बॉयलसय के हेडटस में ट्यूब होल के मध्य
वलगामेंटटस और िॉटर-ट्यूब बॉयलसय के शेि की जाोंच की जाएगी।
(ii) यवद ररसाि नोट वकया जाता है, तो यह एक टूटे हुए वलगामेंट को दशायता है।
(16) कभी-कभी नए या प्रवतस्थापन कायय में सतहो ों पर स्टीम पॉके ट पाए जाते हैं, और जहाों
भी सोंभि हो या होने की सोंभािना हो, सिम व्यक्ति को अिलोकन करना चावहए और यवद
कोई पाया जाता है, तो आिश्यक पररितयनो ोंकी वसफाररश की जाएगी।
(17) (क)(i) पानी के कॉलम के कनेक्शन सवहत भाप और पानी के पाइप की ररसाि के वलए
जाोंच की जाएगी, और यवद कोई पाए जाते हैं तो यह सुवनवश्चत वकया जाएगा वक क्या िे विस्तार
और सोंकु चन के कारण अत्यवधक तनाि का पररणाम हैं , या अन्य कारण से हैं।
(ii) विस्तार और पानी की वनकासी के प्रािधानो ों के साथ-साथ उवचत वबोंदुओ ों पर पयायप्त
मजबूती के सोंबोंध में पाइवपोंग की सामान्य व्यिस्था को ध्यानपूियक नोट वकया जाएगा।
(iii) विवभन्न स्टॉप िाल्वो ों का स्थान यह पता लगाने के वलए देखा जाएगा वक िाल्व बोंद होने पर
पानी पॉके ट में नही ोंजाएगा और इस तरह िाटर-हैमर होने का कारण पता लगाया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 289
(ख) बॉयलर की क्तस्थवत में सेवटोंग या वकसी और कारण से हुए पररितयन से बॉयलर और उसके
मुख्य भाप पाइपो ों के बीच कनेक्शन की व्यिस्था को विशे रूप से नोट करें तावक ये पाइवपोंग
पर अनािश्यक रूप से तनाि न डालें।
(ग) यह पता लगाया जा जाएगा वक बॉयलर के सभी पाइप कनेक्शन उनके बोंधन से उवचत
मजबूती से जोड़े गए हैं उनको बॉयलर में टैप वकया गया है, वफवटोंग की गई है या बॉयलर
से एक फ्लेंज ररिेट वकया गया है।
(घ) (i) सिम व्यक्ति यह वनधायररत करेगा वक क्या ऐसी पाइवपोंग के विस्तार और सोंकु चन के
वलए प्रािधान है, और यह वक इसके अधीन भागो ों को वहृस्टलीकृ त करने के वलए कोई
अनुवचत कों पन तो नही ोंहै।
(ii) इसमें भाप और पानी के सभी पाइप शावमल हैं, और उनके कनेक्शन और वफवटोंग के
साथ ब्लो ऑफ पाइप पर विशे ध्यान वदया जाना चावहए, क्योवोंक तापमान और पानी-
हैमररोंग कारयिाई में तेजी से बदलाि के कारण विस्तार और सोंकु चन पूरे ब्लो ऑफ वसस्टम
पर एक बड़ा तनाि पैदा करते हैं, जो तब अवधक प्रबल होता है जब एक सामान्य वडस्चाजय
में कई ब्लो ऑफ पाइपो ोंको जोड़ वदया जाता है।
(iii) ब्लो ऑफ कनेक्शन की मुि अिस्था को, प्रत्येक बॉयलर में, जब भी सोंभि हो िाल्व
को कु छ सेकों ड के वलए खोलकर परीिण वकया जाएगा, वजससे यह वनधायररत वकया जा
सके वक अत्यवधक कों पन है। कोरोजन को रोकने के वलए ब्लो ऑफ पाइप
बाहरी नमी मुि होना चावहए ।
(18)(क)(i) िाटर कॉलम - पानी के कॉलम में जहाों तक सोंभि हो यह देखने के वलए नोट
वकया जाएगा वक पानी के कॉलम से स्टीम कनेक्शन बनाने िाली पाइवपोंग में पानी के पॉके ट में
जाने की कोई सोंभािना तो नही ोंहै। स्टीम-पाइप को अवधकाोंशतः िॉटर कॉलम की ओर जाना
चावहए।
(ii) िॉटर कॉलम से पानी के पाइप का कनेक्शन बॉयलर की ओर बहना चावहए।
(ख)(i) बॉयलर की आग की सतहो ों के वलए िॉटर कॉलम की सापेि क्तस्थवत को यह वनधायररत
करने के वलए देखा जाएगा वक क्या कॉलम को विवनयमो ों के अनुसार रखा गया है। साथ लगी
हुई िस्तुओ ोंके पररचालन क्तस्थवत वनधायररत करने के वलए उनकी जाोंच की जाएगी।
(19)(क) िाटर ट्यूब बॉयलसय में, जहाों तक सोंभि हो, यह नोट वकया जाना चावहए वक उवचत
बैफवलोंग मौजूद है या नही।ों
(ख) कई प्रकार के बॉयलरो ोंमें, बैफवलोंग की अनुपक्तस्थवत अक्सर बॉयलर सोंरचना के उन वहस्सो ों
पर उच्च तापमान का कारण बनती है, जो ऐसे तापमान के सोंपकय में नही ों आते हैं, वजससे
खतरनाक क्तस्थवत उत्पन्न हो सकती है। ट्यूब सतहो ों के सोंबोंध में दहन मेहराब का स्थान
सािधानी से नोट वकया जाना चावहए। इनकी क्तस्थवत कभी-कभी इस प्रकार की हो जाती है वक
आग की लपटें बॉयलर के वकसी विशे भाग पर कें वद्रत हो जाती हैं और सामग्री के अवधक गमय
होने और इसके पररणामवीकरूप भाग के टूटने का खतरा पैदा हो जाता है।
(20) अनुवचत या दो पूणय बनयर या स्टोकर स्थापना या पररचालन के कारण ताप
कोलोकलाइजेशन होने से बॉयलर पर ब्लो पाइप प्रभाि पैदा करने िाली उत्पन्न ताप की क्तस्थवत
का उवचत उपाय वकया जाएगा।290 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(21) जहाों बॉयलर सस्पेंडेड हैं, िहाों विशे रूप से उन वबोंदुओ ों पर जो बॉयलर सोंरचना
सेवटोंग दीिारो ों या फशय के पास आती उनकी मजबूती और सेवटोंग की सािधानीपूियक जाोंच की
जाएगी। अक्सर जमा राख और कावलख ऐसे वबोंदुओ ों पर बॉयलर सोंरचना को बाोंध देगी और
पररचालन क्तस्थवतयो ों के तहत भागो ों के विस्तार के कारण सोंरचना पर अत्यवधक तनाि पैदा
करेगी।
(22)(क) चूोंवक सुरिा िाल्व बॉयलर पर सबसे महत्वपूणय भाग हैं, इसवलए उनका
अत्यवधक सािधानी के साथ वनरीिण वकया जाना चावहए। िाल्वो ोंके वबना रुकािट सोंचालन के
वलए के वसोंग में क्तस्थत कोरोजन, स्के ल या अन्य अनािश्यक पदाथों का कोई सोंचय नही ों होना
चावहए । स्थापना और सुरिा िाल्व के मुि होने का विशे कर ब्लो-इन-वबयदु पर भाप का
दबाि बाा कर परीिण वकया जाना चावहए, या अगर यह नही ों वकया जा सकता, तो उनके
वबना रुकािट सोंचालन का पता लगाने के वलए टराई लीिर के माध्यम से िाल्व परीिण वकया
जाएगा। जहाों सुरिा िाल्व से वनकलने िाली भाप को एक पाइप के माध्यम से ले जाया जाता है,
िहाों सिम व्यक्ति उस समय यह वनधायररत करेगा वक िाल्व चल रहा है या नही,ों वडस्चाजय पाइप
में खुलने िाली नाली साफ है और विवनयमो ोंके अनुसार है।
(ख) सुरिा िाल्व से वबना रुकािट वनकासी का वनधायरण करने के वलए यवद सिम व्यक्ति इसे
आिश्यक समझे, तो, वडस्चाजय कनेक्शन को हटा वदया जाना चावहए। वकसी भी पररक्तस्थवत में
बॉयलर और उसके सुरिा िाल्व के बीच स्टॉप िाल्व की अनुमवत नही ोंदी जानी चावहए।
(23) सभी बॉयलरो ोंपर स्टीम गेज हटा वदए जाएोंगे और सिम व्यक्ति उनका परीिण करेगा
और उनकी रीवडोंग की तुलना एक मानक परीिण गेज से करेगा। जहाों कई बॉयलर एक
सामान्य स्टीम मेन से जुड़े हुए हो ोंिहाों स्टीम गेज की रीवडोंग देखी जानी चावहए और बॉयलर पर
भाप के साथ वनरीिण करते समय तुलना की जानी चावहए। यवद स्भोक फ्लू या बॉयलर या
सेवटोंग के अन्य उच्च गमय वहस्से के करीब रखा जाता है, जैसा भी मामला हो, भाप गेजो ोंके स्थान
को यह देखने के वलए नोट वकया जाना चावहए वक क्या यह बाहरी रूप से उच्च तापमान के
सोंपकय में है या नही,ों या भाप को रोकने के वलए उवचत साइफन या जाल के साथ गेज क्तरोंग की
सुरिा की कमी के कारण आोंतररक रूप से क्तरोंग के सोंपकय में आने से गमी के सोंपकय में आता
है। सिम व्यक्ति यह सुवनश्चत करेगा वक स्टीम गेज की ओर जाने िाले पाइप को ब्लो करने के
वलए व्यिस्था की गई।
312. खराब शेल की गणना - (1) जब कोई वहस्सा खराब हो जाता है और सिम व्यक्ति को दबाि के
वलए उसकी उपयुिता के बारे में सोंदेह होता है, तो िह एक या एक से अवधक छोटे छेद करेगा और
उनसे उस भाग के वलए लागू सूि के अनुसार गणना करके उन वहस्सो ों की औसत मोटाई का पता
लगाकर खुद को सोंतुष्ट स कर सके गा। इस प्रकार के आकलन और गणना को िह वनरीिण ज्ञापन
पुक्तस्तका में दजय करेगा।
(2) सिम व्यक्ति, बॉयलर शेल के खराब वहस्से, उदाहरण के वलए, लोंकाशायर बॉयलर के
सीवटोंग ब्लॉक की रेखा की गणना करने के वलए वनम्नवलक्तखत सूि का उपयोग करेगा:
2t x S
P = -------- (समीकरण 8 / 1)
D x F[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 291
जहाों
t = खराब प्लेट की मोटाई, जहाों िह सबसे पतली हो, वमवलमीटर में,
S= शेल की सामग्री की न्यूनतम तन्यता शक्ति, वकलोग्राम/ वमवलमीटर2में
D = शेल का आोंतररक व्यास, वमवलमीटर में
F = सुरिा कारक, जो 4 से कम नही ोंहोगा।
P = अवधकतम वीकीकायय काययशील दबाि, वकलोग्राम/वमवलमीटर2 में
313. शेल टाईप बॉयलरो ं का पुराना होना - (1) बॉयलरो ों पर पुराना होने के प्रभाि की गणना के
वलए, इन विवनयमो ोंमें सूिो ोंसे गणना वकए गए वडजाइन दबाि को नीचे दी गई तावलका के अनुसार कम
वकया जाएगा:
तावलका 8 /4
बॉयलर का पुरानापन (ि ों में) 25 35 45 50 60 70 80 90 100
वडजाइन दबाि (प्रवतशत) 95 90 85 80 70 60 50 40 30
(2) उन बॉयलरो ों के वलए, वजनकी प्लेटो ों को पहले ही काट वदया गया है और उनका परीिण
वकया जा चुका है, उन्हें बॉयलरो ों के परीिण की तारीख से पचास ि य की अवतररि
कायायिवध प्रदान की जाएगी। परीिण के बाद वजस वडजाइन दबाि की अनुमवत दी जाएगी,
िह नीचे दी गई सारणी के अनुसार कम वकया जाएगा:
तावलका 8 /5
परीिण की तारीख के बाद की अिवध (ि य में) 10 20 30 40 50
वडजाइन दबाि की अनुमवत (प्रवतशत) 90 80 70 50 30
(3) (क) पच्चीस साल का कायायिवध पूरा होने पर, शेल प्रकार के अपवशष्ट स ताप बॉयलरो ों (अन-
फायडय) का, कें द्रीय बॉयलर बोडय द्वारा अनुमोवदत शे कायायिवध मूल्ाोंकन सोंगठन
(आरएलएओ) द्वारा गैर-विनाशकारी परीिण वकया जाएगा।
(ख) ऐसे बॉयलरो ों के शेल, एोंड-प्लेटटस, स्टैंड पाइप आवद जैसे दबाि भागो ों का वनरीिण
अल्ट्रासोवनक परीिण, चुोंबकीय कण परीिण और डाई पेनेटरेंट परीिण द्वारा वकया जाएगा।
(ग) यवद कें द्रीय बॉयलर बोडय द्वारा वनधायररत मानको ों के अनुसार पररणाम वीकीकायय हैं, तो
बॉयलर के कायायिवध को शे कायायिवध मूल्ाोंकन सोंगठन (आरएलएओ) द्वारा अनुशोंवसत
बारह ि य या उससे कम अिवध या उससे कम की अिवध हेतु बााने के वलए, बॉयलर के मुख्य
वनरीिक या वनदेशक, जैसा भी मामला हो, द्वारा एक प्रमाण पि जारी वकया जाएगा ।
(घ) शे कायायिवध मूल्ाोंकन सोंगठन की वसफाररश पर ऐसे बॉयलरो ों के काययशील दबाि
को कम वकया जा सकता है।
(ङ) उसके बाद हर बारह साल में गैर-विनाशकारी परीिण द्वारा शे कायायिवध का
मूल्ाोंकन या कें द्रीय बॉयलर बोडय द्वारा अनुमोवदत शे कायायिवध मूल्ाोंकन सोंगठन292 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(आरएलएओ) द्वारा वकया जाएगा। ऐसी एजेंसी, मुख्य वनरीिक या बॉयलर वनदेशक, जैसा भी
मामला हो, के कायायलय के साथ समन्रय में काम करेगी।
नोट :
(1) उप-विवनयमन (1) या उप-विवनयमन (2) के प्रािधानो ों का चयन करना यह बॉयलर के
मावलक के विकि पर होगा वक या उपरोि उप-विवनयमन (3) के अनुसार बॉयलर के शे
कायायिवध मूल्ाोंकन का विकि दे।
(2) जहाों कही,ों शे कायायिवध मूल्ाोंकन के वलए बॉयलर का गैर-विनाशकारी परीिण करना
सोंभि नही ोंहै, िहाों उप-विवनयमन (1) या उप-विवनयमन (2) के प्रािधान लागू होगों े।
314. िाटर ट्यूब बॉयलरो ं का पुराना होना – (1) (क) बॉयलर जो 400 वडग्री सेक्तियस
(मुख्य भाप आउटलेट तापमान) और उससे अवधक के तापमान पर काम कर रहे हैं, उनके
घटको ोंकी शे कायायिवध का आकलन करने के वलए जब िे 100,000 घोंटे तक सोंचालन में हो ों
तब परीिण शे कायायिवध का मूल्ाोंकन सोंगठन विवनयमन 315 की नीचे दी
गई तावलका 8 / 6 के अनुसार वकया जाएगा।
(ख) यवद कें द्रीय बॉयलर बोडय द्वारा वनधायररत मानको ों के अनुसार पररणाम वीकीकायय हैं,
तो बॉयलर के कायायिवध को छह साल की और अिवध के वलए बााने के वलए, बॉयलर
के मुख्य वनरीिक या वनदेशक जैसा भी मामला हो द्वारा एक प्रमाण पि जारी वकया
जाएगा। शे कायायिवध मूल्ाोंकन सोंगठन द्वारा अनुशोंवसत इस शे कायायिवध का यह
आकलन उसके बाद हर छह साल में कें द्रीय बॉयलर बोडय द्वारा अनुमोवदत शे
कायायिवध मूल्ाोंकन सोंगठन द्वारा वकया जाएगा। शे कायायिवध मूल्ाोंकन सोंगठन,
शे कायायिवध का मूल्ाोंकन और विस्तार के िेि में, मुख्य वनरीिक या बॉयलर
वनदेशक के कायायलय के साथ वनकट समन्रय में काम करेगा। ऐसे बॉयलरो ों
का वडजाइन दबाि शे कायायिवध मूल्ाोंकन सोंगठन की वसफाररशो ों पर कम वकया जा
सकता है;
(2)(क) पच्चीस ि य की कायायिवध के पूरा होने पर 400 वडग्री सेक्तियस (मुख्य भाप
आउटलेट तापमान) से कम तापमान पर काम कर रहे बॉयलरो ों के घटको ों की शे
कायायिवध का मूल्ाोंकन, शे कायायिवध का मूल्ाोंकन सोंगठन द्वारा विवनयमन 315 की
नीचे दी गई 8/7 तावलका के अनुसार वकया जाना है।
(ख) यवद कें द्रीय बॉयलर बोडय द्वारा वनधायररत मानको ों के अनुसार पररणाम वीकीकायय हैं,
तो बॉयलर के कायायिवध को बारह साल की या कम अिवध तक और अिवध के वलए
बााने के वलए, बॉयलर के मुख्य वनरीिक या वनदेशक जैसा भी मामला हो द्वारा एक
प्रमाण पि जारी वकया जाएगा। शे कायायिवध शे कायायिवध मूल्ाोंकन सोंगठन द्वारा
अनुशोंवसत होगी। शे कायायिवध का यह आकलन उसके बाद हर बारह साल में
कें द्रीय बॉयलर बोडय द्वारा अनुमोवदत एक शे कायायिवध सोंगठन द्वारा वकया
जाएगा। शे कायायिवध मूल्ाोंकन सोंगठन, शे कायायिवध मूल्ाोंकन और विस्तार के
िेि में, मुख्य वनरीिक या बॉयलर वनदेशक के कायायलय के साथ वनकट समन्रय में
काम करेगा। वडजाइन दबाि में इस तरह के बॉयलरो ों के शे कायायिवध का आकलन
सोंगठन की वसफाररशो ोंके कम वकया जा सकता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 293
(ग) इस विवनयम में कु छ भी शावमल होने के बािजूद, 400 वडग्री सेक्तियस (मुख्य भाप
आउटलेट तापमान) से कम तापमान पर काम करने िाले बॉयलरो ों के वलए 50
वकग्रा/सेमी2 (जी) से कम दबाि और इस तरह के विस्तृत शे कायायिवध मूल्ाोंकन
अवनिायय नही ोंहै। हालाोंवक, ऐसे मामलो ोंमें, ऐसे बॉयलरो ों के डरम और हेडर का
वनरीिण अल्ट्रासोवनक परीिण, चुोंबकीय कण परीिण और डाई पेनीटरेंट परीिण
द्वारा वकया जाएगा।
315. हीट ररकिरी टीम जेनरेटर (एचआरएसजी) का पुराना होना: हीट ररकिरी स्टीम
जेनरेटर (एचआरएसजी) जो 400°C (मुख्य स्टीम आउटलेट तापमान) और उससे अवधक के
तापमान पर काम कर रहे हैं, जो 100,000 घोंटे के वलए प्रचालन में हो ों तो इस वनयम के तहत
उनके घटको ों की शे कायायिवध के आकलन के वलए उनके घटको ों के वलए शे कायायिवध
मूल्ाोंकन सोंगठन द्वारा नीचे दी गई तावलका 8 / 8 के अनुसार गैर-विनाशकारी परीिण से
वकया जाएगा।294 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 8/6
हृम भाग दृश्य अल्ट्रा मैग- वलक्तिड प्रवतकृ वत नमूना जमा बाहरी फाइबर कठोरता अन्य
सों. सोवनक नेवटक डाई चयन विश्ले ण व्यास ऑवप्टक
पररिण कण पेनीटरेंट और वनरीिण
वनरीिण वनरीिण मोटाई
1. 2. 3. 4. 5. 6. 7. 8 9. 10. 11. 12 13
1 भाप डरम हाों हाों हाों हाों हाों नही ों हाों@ हाों* नही ों हाों
2 पानी का डरम हाों हाों हाों हाों हाों नही ों हाों@ हाों* नही ों हाों
3 वनचला शी यलेख हाों हाों नही ों हाों नही ों नही ों नही ों हाों हाों हाों
4 कम तापमान हैडर हाों हाों नही ों हाों नही ों नही ों नही ों हाों हाों हाों
(400 0 सेंटीग्रेट से कम )
5 अटेम्परेटर हेडर हाों हाों नही ों हाों हाों नही ों नही ों हाों हाों हाों सूजन माप
6 इकोनोमाइजर ट्यूब हाों नही ों नही ों नही ों नही ों हाों नही ों हाों नही ों हाों#
7 कन्रेंशन सुपर-हीटर हाों नही ों नही ों नही ों नही ों हाों नही ों हाों नही ों हाों#
कॉइि
8 प्राथवमक सुपरहीटर कॉइि हाों नही ों नही ों नही ों नही ों हाों नही ों हाों नही ों हाों# गैर-
विनाशकारी
ऑक्साइड
मोटाई
वनरीिण
9 प्रीफाइनल सुपर-हीटर हाों नही ों नही ों नही ों नही ों हााँ$$ नही ों हाों नही ों हाों#
कॉइि
10 फाइनल सुपर-हीट कॉइि हाों नही ों नही ों नही ों नही ों हााँ$$ नही ों हाों नही ों हाों#
11 ररहीटर कॉइि हाों नही ों नही ों नही ों नही ों हााँ$$ नही ों हाों नही ों हाों#
12 उच्च तापमान हेडर हाों हाों नही ों हाों हाों नही ों YNo हाों हाों हाों
(400 सेंटीग्रेट और ऊपर)
13 मुख्य भाप पाइवपोंग हाों नही ों नही ों नही ों हाों नही ों नही ों हाों नही ों हाों[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 295
14 कोल्ड रीहीट पाइवपोंग हाों नही ों नही ों नही ों हाों नही ों नही ों हाों नही ों हाों
15 हॉट रीहीट पाइवपोंग हाों नही ों नही ों नही ों हाों नही ों नही ों हाों नही ों हाों
16 एसएच/आरएच वलोंक हाों हाों नही ों हाों हाों नही ों नही ों हाों नही ों नही ों
17 बॉयलर बैंक ट्यूब हाों नही ों नही ों नही ों नही ों नही ों नही ों हाों नही ों नही ों
18 फनेस िॉटर िाि हाों नही ों नही ों नही ों नही ों हाों हाों@ हाों नही ों नही ों
नोट: अन्य घटको ोंकी जाोंच/परीिा देखकर की जाएगी।
* स्टीम डरम और िाटर डरम/बॉटम हेडर के वलए ओडी या आईडी माप वलया जाना है।
# प्रयोगशाला में जाोंच की जाने िाली ट्यूब के नमूनो ों(अोंदर और बाहर दोनो)ों की कठोरता।
@ जमा विश्ले ण वकया जाना है।
$$ नमूनो ोंपर त्वररत हृीप रप्चर परीिण वकया जाएगा।296 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 8 /7
हृम सों. भाग दृश्य अल्ट्रा मैग- तरल प्रवतकृ वत नमूना जमा बाहरी फाइबर कठोरता अन्य
सोवनक नेवटक रोंग चयन विश्ले ण व्यास ऑवप्टक
का कण पेनीटरेट और वनरीिण
पररिण वनरीिण वनरीिण मोटाई
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
1. भाप डरम हाों हाों हाों हाों हाों नही ों हाों@ हाों* नही ों नही ों
2. पानी का डरम हाों हाों हाों हाों हाों नही ों हाों@ हाों* नही ों नही ों
3. इकोनोमाइजर ट्यूब हाों नही ों नही ों नही ों नही ों हाों नही ों हाों नही ों नही ों
4. कनिेक्शन सुपरहीटर हाों नही ों नही ों नही ों नही ों हाों नही ों हाों नही ों नही ों
कॉइि
5. प्राथवमक सुपरहीटर हाों नही ों नही ों नही ों नही ों हाों नही ों हाों नही ों नही ों
कॉइि
6. अोंवतम सुपरहीटर हाों नही ों नही ों नही ों नही ों हाों नही ों हाों नही ों नही ों
कॉइि
7. िॉटर शी यलेख हाों हाों नही ों हाों नही ों नही ों नही ों हाों हाों नही ों
8. स्टीम हेडर हाों हाों नही ों हाों नही ों नही ों नही ों हाों हाों नही ों
9. बैंक ट्यूब हाों नही ों नही ों नही ों नही ों नही ों नही ों हाों नही ों नही ों
10. फनेस िॉटर िाल हाों नही ों नही ों नही ों नही ों हाों हाों@ हाों नही ों नही ों
11. मुख्य भाप पाइवपोंग हाों नही ों नही ों हाों नही ों नही ों नही ों हाों नही ों नही ों
नोट: अन्य घटको ोंकी जाोंच/परीिा देखकर की जाएगी।
* स्टीम डरम और िाटर डरम/बॉटम हेडर के वलए ओडी या आईडी माप वलया जाना है।
# प्रयोगशाला में जाोंच की जाने िाली ट्यूब के नमूनो ों(अोंदर और बाहर दोनो)ों की कठोरता।
@ जमाि विश्ले ण प्रयोगशाला में वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 297
तावलका 8 / 8
हृम सों. भाग दृश्य अल्ट्रा मैग- तरल प्रवतकृ वत नमूना जमा बाहरी फाइबर कठोरता अन्य
सोवनक नेवटक रोंग चयन विश्ले ण व्यास ओवप्टक
का कण पेनाटरेट और वनरीिण
पररिण वनरीिण वनरीिण मोटाई
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
1. एसएच/आरएच नही ों नही ों नही ों नही ों नही ों हाों* नही ों नही ों नही ों हाों*
ट्यूब
2. एसएच/आरएच हाों नही ों नही ों नही ों हाों # नही ों नही ों हाों नही ों हाों
इनलेट और
आउटलेट हैडर
3. डीईएसएच हैडर हाों नही ों नही ों नही ों हाों# नही ों नही ों हाों नही ों हाों
4. डीईएसएच इनलेट हाों नही ों नही ों नही ों हाों# नही ों नही ों हाों नही ों हाों
और आउटलेट
वलोंक
5. डरम हाों हाों हाों हाों हाों नही ों हाों आईडी नही ों हाों
सब
मोटाडय
6. डाउन कमसय हाों नही ों नही ों नही ों नही ों नही ों नही ों हाों नही ों हाों
7. िाष्पीकरण हाों नही ों नही ों नही ों नही ों नही ों नही ों हाों नही ों हाों
आउटलेट वलोंक
8. िाष्पीकरण ट्यूब नही ों नही ों नही ों नही ों नही ों हाों* हाों* नही ों नही ों हाों*
9. इकोनोमाइजर नही ों नही ों नही ों नही ों नही ों हाों* हाों* नही ों नही ों हाों*
ट्यूब
10. इकोनोमाइजर हाों नही ों नही ों नही ों नही ों नही ों नही ों नही ों नही ों हाों298 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
इनलेट और
आउटलेट
हैडर
11. डरम वलोंक के हाों नही ों नही ों नही ों नही ों नही ों नही ों हाों नही ों हाों
इकोनोमाइजर
* असफलता के इवतहास के आधार पर वनणयय वलया जाना।
# 400 वडग्री सेक्तियस से ऊपर के एसएच/आरएच हेडर के वलए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 299
316. बॉयलर और टीम पाइपो ंकी मरम्मत - (1) बड़ी मरम्मत या प्रवतस्थापन जैसे ट्यूब, कॉइल, हेडर,
डरम, फ्यूजन िेल्डेड पैच से शेल, फायरबॉक्स और बॉयलर की एोंड प्लेट और इन विवनयमो ोंके तहत अनुमत
बॉयलरो ों के खराब भागो ों का व्यापक विवनमायण, भवट्टयो ों और एोंड प्लेटटस का निीनीकरण शेल के वहस्से,
फायरबॉक्स, गडयर और स्टीम-पाइप आवद, के कायय के िल एक फमय को सौपों े जाएोंगे, वजसे इन विवनयमो ोंके
तहत साझेदार के रूप में मान्यता प्राप्त है।
(2) मान्यता चाहने िाली कोई भी फमय, उस राज्य के बॉयलरो ों के मुख्य वनरीिक को, वजसमें
मान्यता माोंगी जाती है, तावलका 8 /9 में वनवदयष्ट स शुल्क के साथ 'प्रपि XIII' में आिेदन करेगी।
(3) मरम्मतकताय के रूप में मान्यता प्राप्त करने िाली फमय बॉयलरो ों के िगय के आधार पर
वनम्नवलक्तखत आिश्यकताओ ों को पूरा करेगी, नामतः : -
(क) प्रथम श्रेणी के बॉयलर मरम्मतकताय के वलए, फमय के मावलक के पास वीकयों के पास
मैके वनकल या प्रोडक्शन या पािर प्लाोंट या मेटलवजयकल इोंजीवनयररोंग में वडग्री होगी या फमय के
पास मैके वनकल या प्रोडक्शन या पािर में वडग्री रखने िाला स्थायी रूप से वनयोवजत इोंजीवनयर
होगा। उि मावलक या स्थायी रूप से वनयोवजत इोंजीवनयर को सोंयोंि या धातुकमय इोंजीवनयररोंग और
बॉयलर के वनमायण, विवनमायण, मरम्मत या रखरखाि और गुणित्ता वनयोंिण में लगे सोंगठन में कम
से कम पाोंच साल का अनुभि होना चावहए; और फमय के पास इन विवनयमो ों के प्रािधानो ों के
अनुसार योग्य और स्थायी रूप से वनयोवजत िेल्डर भी होगों े;
(ख) वद्वतीय श्रेणी के बॉयलर मरम्मतकताय के वलए- फमय के मावलक के पास मैके वनकल
इोंजीवनयररोंग में वडप्लोमा होगा या फमय के पास मैके वनकल इोंजीवनयररोंग में वडप्लोमा रखने िाला
एक स्थायी रूप से वनयोवजत इोंजीवनयर होगा और उि मावलक या स्थायी रूप से वनयोवजत
इोंजीवनयर बॉयलर के विवनमायण, विवनमायण, मरम्मत या रखरखाि और गुणित्ता वनयोंिण में लगे
सोंगठन में कम से कम तीन साल का अनुभि भी हो; और फमय के पास इन विवनयमो ों के प्रािधानो ों
के अनुसार योग्य और स्थायी रूप से वनयोवजत िेल्डर भी होगों े;
(ग) तृतीय श्रेणी के बॉयलर मरम्मतकताय के वलए - फमय मावलक वीकयों या फमय में स्थायी रूप से
वनयोवजत व्यक्ति को, बॉयलर की मरम्मत, अनुरिण, प्रचालन, विवनमायण या वनरीिण में कम से
कम तीन ि य का अनुभि होगा और फमय के पास प्रािधानो ों के अनुसार योग्य और स्थायी रूप से
वनयोवजत िेल्डर भी होगों े।
(घ) विशे श्रेणी का बॉयलर मरम्मतकताय-फमय के मावलक के पास कम से कम तीन साल की
अिवध के वलए िेक्तल्डोंग तकनीक में विशे अनुभि के साथ-साथ मैके वनकल या िेक्तल्डोंग
इोंजीवनयररोंग में वडग्री होनी चावहए या फमय के पास स्थायी रूप से वनयोवजत इोंजीवनयर होना
चावहए। कम से कम तीन साल की अिवध के वलए िेक्तल्डोंग तकनीक में विशे अनुभि के साथ
मैके वनकल या िेक्तल्डोंग इोंजीवनयररोंग में वडग्री , और इन विवनयमो ों के प्रािधानो ों के अनुसार स्थायी
रूप से वनयोवजत िेल्डर वजनके पास टोंगस्टन इनटय गैस िेक्तल्डोंग करने के वलए िैध प्रमाण पि भी
होना चावहए;300 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ङ) (i) जहाों वबजली स्टेशन, उियरक सोंयोंि, रासायवनक और पेटरोके वमकल सोंयोंि या ररफाइनरी
अपने वीकयों के बॉयलर की मरम्मत के वलए आिेदन करते हैं, उनके पास सभी सुविधाएों होगों ी, और
िे इन विवनयमो ों के अनुसार अपने वीकयों के बॉयलर के मरम्मत के वलए राज्य के बॉयलर के मुख्य
वनरीिक से मरम्मत के वलए अनुमवत के वलए आिेदन कर सकते हैं।;
(ii). बॉयलर की मरम्मत की अनुमवत के वलए आिेदन प्राप्त होने पर, राज्य के मुख्य बॉयलर
वनरीिक, आिेदन प्राप्त होने के दो वदनो ोंके भीतर आिेदन का जिाब देंगे ।
(4) मुख्य वनरीिक, प्रश्नािली के साथ आिेदन की जाोंच और मूल्ाोंकन करेगा और खुद को
इस बारे में सोंतुष्ट स करने के बाद वक वनम्नवलक्तखत आिश्यकताओों को पूरा वकया गया है, फमय को
एक मरम्मतकताय के रूप में तीस वदनो ोंकी अिवध के भीतर, वजस श्रेणी के वलए आिेदन वकया गया
है, मान्यता देगा, अथायतट: -
(क) वक फमय के पास रेक्तरफायर या जनरेटर, ग्राइोंडर, सामान्य उपकरण और टैकल,
डाई-पेनेटरेंट वकट, एक्सपैंडर और मापक योंि हैं;
(ख) वक विदटयुत चाप या ऑक्सी-एवसवटलीन िेक्तल्डोंग सेट और मरम्मत करने के वलए उसके
पास जो उपकरण और सोंयोंि उपलब्ध हैं िे वकए गए कायय के वलए उपयुि हैं।
(ग) वक प्रयुि सामग्री की गुणित्ता इन विवनयमो ोंमें वनधायररत विवनदेशो ोंके अनुरूप है;
(घ) वक फमय द्वारा वनयोवजत पययिेिी और पररचालन कमयचारी के पास वकए गए कायय के वलए
आिश्यक प्रवशिण और अनुभि है;
(ङ) वक फमय द्वारा वनयोवजत सभी िेल्डरो ों के पास इन विवनयमो ोंके अध्याय - 13 के तहत
आिश्यक प्रमाण पि जारी वकए गए हैं;
(च) कायय का स्तर उच्च कोवट का होना चावहए और मुख्य वनरीिक द्वारा वनवदयष्ट स सभी
आिश्यकताओ ोंऔर परीिण का अनुपालन करना चावहए।
(5) एक मरम्मतकताय के रूप में फमय की मान्यता दो साल की अिवध के वलए होगी और
तदुपरान्त उि अिवध की समाक्तप्त से कम से कम दो महीने पूिय इसकी मान्यता के निीनीकरण के
वलए आिेदन करना होगा।
(6) एक राज्य में मान्यता प्राप्त मरम्मत करने िाला इस विवनयम में वनधायररत शुल्क का
भुगतान करके सोंबोंवधत राज्य के मुख्य वनरीिक या बॉयलर के वनदेशक से मान्यता प्राप्त करके
वकसी अन्य राज्य में काम करने के वलए पाि होगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 301
(7) यवद मरम्मत करने िाला, अवधवनयम या विवनयमो ोंके प्रािधानो ोंका उिोंघन करने में वलप्त
पाया जाता है, तो फमय को सभी राज्यो ों और कें द्र शावसत प्रदेशो ों के मुख्य वनरीिक या बॉयलर के
वनदेशक और कें द्रीय बॉयलर बोडय के सवचि को सूवचत करते हुए उसे वनव द् सूची में डाल वदया
जाएगा और वकसी भी दशा में निीनीकरण नही ोंवकया जाएगा।
तावलका 8/9
बॉयलर और टीम पाइप की मरम्मत करने िाले के वलए शुल्क (विवनयम 316)
हृम.सों. बॉयलर मान्यता के वलए मान्यता के पृष्ाोंकन के वलए
मरम्मतकताय की शुल्क (रुपए में) निीनीकरण के शुल्क (रुपए में)
श्रेणी वलए शुल्क (रुपए
में)
(1) (2) (3) (4) (5)
1. विशे श्रेणी 15,000/- 7,500/- 5,000/-
2. श्रेणी I 10,000/- 5,000/- 4,000/-
3. श्रेणी II 5,000/- 2,400/- 2,000/-
4. श्रेणी III 2,400/- 1,250/- 1,000/-
317. मरम्मत के वलए प्रवहृया - (1) मरम्मत कायय, वनरीिक या सिम व्यक्ति की देखरेख में वकया
जाएगा और जब लोकोमोवटि ट्यूब बॉयलरो ों के फायरबॉक्स और स्भोक ट्यूब िापस ले वलए जाते हैं, तो
आोंतररक भागो,ों जो अन्यथा वनरीिण के वलए दुगयम हैं, का वनरीिण, वनरीिक या सिम व्यक्ति, जैसा भी
मामला हो द्वारा वकया जाएगा।
(2) बॉयलर के शेल की मरम्मत पैवचोंग या खराब या िवतग्रस्त प्लेट की एक पट्टी को
हटाकर और लम्बित बट वसरो ों पर किररोंग पवट्टयो ों के साथ नई पट्टी लगाकर की
जाएगी, ररिेट वकए गए जोड़ो ोंकी मजबूती शेल के लम्बित जोड़ से कम नही ोंहोनी चावहए।
(3) (क) आग के सोंपकय में आने िाली प्लेटो ों के पैच िकय में धातु से धातु तक वबना वकसी
जोड़ के वफट वकए जाएोंगे;
(ख) छेद के कोनो ों को अच्छी तरह गोल छोड़कर, प्रभावित वहस्से को काट वदया
जाएगा।302 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ग) जहाों भी सोंभि हो, ररिेट छेद के वकनारे और प्लेट के वकनारे के बीच कम से
कम ररिेट के व्यास के बराबर प्लेट की चौड़ाई के साथ उवचत दूरी िाले ररिेटटस सुरवित
करने के वलए पेंच वकए जाने चावहए ।
(घ) जहाों ररिेवटोंग अव्यािहाररक है, िहाों प्लेट को िेल्ट् वफवटोंग काउोंटरसोंक हेडेड स्क्रू
वपन द्वारा सुरवित वकया जाएगा।
(4) पैच प्लेट की मोटाई उस प्लेट की मूल मोटाई से कम नही ोंहोनी चावहए वजसे पैच
करने के वलए इस्तेमाल वकया जाता है।
(5) उभरी हुई या विकृ त भवट्टयो ों या गोलाकार खोंड में यवद बहुत अवधक उभार या
विकृ वत नही ोंहै, तो उसे िापस आकार में दबाया जा सकता है।
(6) िैवतज बॉयलरो ों की गोलाकार भवट्टयाों जो विकृ त हो गई हैं, उन्हें उपयुि रूप से
मजबूत वकया जा सकता है।
(7) (क) एोंटी-कोलैप्स ररोंग्स वसोंगल या डबल एोंगि के पयायप्त खोंड होगों े, जो स्क्रू के साथ
बैक टु बैक बोल्ट् के साथ 22 वममी व्यास से कम नही ोंहोगों े और लगभग 178 वममी वपच में
होगों े, हालाोंवक कोण के फ्लैट और फनेस में पेंच, वसरो ोंको आग की तरफ गोल वकया जाता
है और दूसरी तरफ नट के साथ लगाया जाता है।
(ख) स्टे बोल्ट्, फनेस और एोंगल ररोंग के बीच कम से कम 25 वममी की गहराई में
फे रूल के साथ लगाए जाएोंगे।
(8) एक बॉयलर वजसके वलए िेक्तल्डोंग इन वनयमो ोंके तहत मना है बॉयलर के वकसी भी वहस्से में
मरम्मत के वलए िेक्तल्डोंग वीकीकार नही ोंवकया जाएगा और उसके वकसी भी वहस्से की छोटे अलग-
थलग कोरोजन लगे हुए या वपवटड स्थान या वनकास के वकनारो ों के विवनमायण के अवतररि
िेक्तल्डोंग द्वारा मरम्मत नही ोंकी जाएगी।
(9) बेलनाकार गोले के बतयन या फ्लैट एोंड प्लेटो ोंमें या एक पररवध वदशा में भट्ठी के फ्लैंजेंस के
बेंड में दरार या खाोंचे को बाहर वनकाला जा सकता है और िेल्ड वकया जा सकता है।
(10) िृत्ताकार भवट्टयो ोंऔर फायरबॉक्सो ोंके बेकार वहस्सो ों और आग लगने िाली फ्लैट प्लेटो ों को
आयताकार फायरबॉक्स और दहन किो ों के रूप में काटा जा सकता है और उन्हें नए िेल्डेड
टुकड़ो ोंसे बदला जा सकता है या िे िेक्तल्डोंग द्वारा वनवमयत हो सकते हैं।
(11) गोलाकार भवट्टयो ों और फायरबॉक्स में लम्बित दरारें और आयताकार फायरबॉक्स और
दहन किो ोंमें दरारें िेल्ड की जा सकती हैं।
(12) कोई भी स्टे बार िेल्ड नही ोंवकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 303
(13) स्भोक ट्यूब को या तो फ्यूजन िेक्तल्डोंग, फ्लश िेक्तल्डोंग या ऑक्सी-एवसवटलीन िेक्तल्डोंग द्वारा
बट-िेल्ड वकया जा सकता है, और वनरीिण प्रावधकारी के वििेक पर इनका हाईडरॉवलक रूप से
परीिण वकया जा सकता है।
318. मरम्मत के दौरान िेक्तल्डोंग की प्रवहृया। मरम्मतकताय वनरीिण प्रावधकारी को वनम्नवलक्तखत
सोंदभय में सोंतुष्ट स करेगा-
(1) वक उसके पास मौजूद विदटयुत चाप या ऑक्सी-एवसवटलीन िेक्तल्डोंग सेट और अन्य सभी
उपकरण और सोंयोंि मरम्मत वकए गए कायय करने के वलए उपयुि हैं।
(2) वक प्रयुि सामग्री की गुणित्ता, वनधायररत विवनदेशो ोंके अनुरूप है।
(3) वक उसके द्वारा वनयोवजत पययिेिक तथा पररचालन कमयचाररयो ों के पास, वकए गए कायय के
वलए आिश्यक प्रवशिण और अनुभि है।
(4) वक उसके द्वारा वनयोवजत सभी िेल्डरो ों के पास इन विवनयमो ोंके अध्याय 13 के तहत
आिश्यक प्रमाण पि उपलब्ध हैं ।
(5) कायय का स्तर उच्च कोवट का होना चावहए और मुख्य वनरीिक द्वारा वनधायररत की गई सभी
आिश्यकताओ ोंऔर परीिण का अनुपालन वकया जाना चावहए ।
319. ररिेवटंग और अन्य मरम्मतकायष - मरम्मतकताय मुख्य वनरीिक को वनम्नवलक्तखत सोंदभय में
सोंतुष्ट स करेगा:
(1) वक उसके पास आिश्यक उपकरण और औजार हैं और वकए गए काम के वलए
िह, प्रवशवित और अनुभिी कामगारो ोंऔर कमयचाररयो ोंको वनयुि करता है।
(2) कायय का स्तर उच्च कोवट का होना चावहए और मुख्य वनरीिक द्वारा वनधायररत वकए
गए सभी आिश्यकताओ ों और परीिण का अनुपालन करना चावहए और उपयोग की जाने
िाली सभी सामग्री बॉयलर गुणित्ता की होगी।
320. मरम्मत के वलए विविध प्रािधान–(1) (क) अपने अन्य कायों पर समुवचत रूप से उपाय
देने के साथ-साथ सिम व्यक्ति को मरम्मत कायय की मॉनीटररोंग करनी चावहए।
(ख) जब भी लोकोमोवटि ट्यूब बॉयलरो ों के फायर बॉक्स और स्भोक ट्यूब िापस वनकाले जाते हैं,
इस अिसर का लाभ उठाते हुए आोंतररक भागो ोंका वनरीिण वकया जाना चावहए, जो अन्यथा गहन
वनरीिण करने के वलए दुगयम हैं304 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) बॉयलर के शेल की मरम्मत या तो पैच या एक िवतग्रस्त या खराब पट्टी को हटाने और
किर के साथ लम्बित बट पर नई पट्टी डालने से प्रभावित होगी, रेिेटेड जोड़ो ोंकी मजबूती शेल के
लम्बित जोड़ो ोंसे कम नही ोंहोगी।
(3) (क) आग के सोंपकय में आने िाली प्लेटो ोंमें पैच धातु से धातु तक वबना वकसी जोड़ के वफट वकए
जाने चावहए। छेद के कोनो ोंको गोल छोड़कर, प्रभावित वहस्से को काट वदया जाएगा।
(ख) जहाों भी सोंभि हो पैच को, सुरवित वकया जाएगा, ओर ररिेटटस कम से कम प्लेट की चौड़ाई के
बराबर व्यास िाले दोने या ररिेट छेद के वकनारे और प्लेट के वकनारे के बीच में ररिेट होगा।
(ग) जहाों ररिेवटोंग अव्यािहाररक हो िहाों प्लेट को िेल्ट् वफवटोंग काउोंटरसोंक हेडेड स्क्रू वपन द्वारा
सुरवित वकया जाएगा।
(4) पैच प्लेट की मोटाई उस प्लेट की मूल मोटाई से कम नही ों होनी चावहए वजसे पैच वकया
जाना है।
(5) यवद िृत्ताकार खोंड की उभरी हुई या विकृ त फनेसेस की विकृ वत का उभार बहुत अवधक
नही ोंहै, तो उसे दबाकर िापस अपने आकार में लाया जा सकता है।
(6) सकुय लर फनेस हॉररजॉन्टल बॉयलसय जो खराब हो गए हैं, उन्हें उपयुि रूप से ठीक वकया
जा सकता है ।
(7) पयायप्त खोंड के एोंटी-कोलैप्स ररोंग्स या तो इकसरी या दोहरी एोंगल के होगों े, जो स्क्रू स्टे के
साथ बैक-टू-बैक 22 वममी व्यास से कम नही ोंहोगों े और लगभग 178 वममी वपच कोण के फ्लैट से
होकर गुजरती है उसके वसरो ोंको आग की तरफ गोल वकया जाता है, और दूसरी तरफ नट लगाया
जाता है। फे रूि के साथ स्टे बोल्ट् को, एोंगल ररोंग और फनेस के बीच कम से कम 25 वममी की
गहराई में लगाया जाना चावहए ।
(8) बॉयलर के वकसी भी वहस्से, वजसके वलए इन विवनयमो ों के तहत नए बॉयलर के वलए
िेक्तल्डोंग वनव द् है, की मरम्मत के वलए िेक्तल्डोंग को वीकीकार नही ोंवकया जाएगा। बॉयलर के शेल की
मरम्मत, छोटे कोरोजन लगे गड्ढे को भरने या वनकासी के व्यथय वकनारो ों को, बनाने के अलािा
िेक्तल्डोंग द्वारा नही ोंकी जानी चावहए।
(9) बेलनाकार गोले की वडश या फ्लैट एोंड प्लेट में ग्रूविोंग या हृै क्स या पररवध वदशा में फनेस
फ्लैंजेस के मोड़ो ोंको बाहर वनकाला जा सकता है और िेल्ड वकया जा सकता है।
(10) िृत्ताकार भवट्टयो ोंऔर आग के बक्सो ोंके बेकार वहस्सो ोंऔर आग लगने िाली फ्लैट प्लेटो ोंके
रूप में आयताकार फायर बॉक्स और दहन किो ों को काट कर बाहर वनकाला जा सकता है और
उन्हें नए िेल्डेड टुकड़ो ों से बदला जा सकता है या िे िेक्तल्डोंग द्वारा वनवमयत वकया जा सकता
है। गोलाकार भवट्टयो ों और आग के बक्सो ों और आयताकार फ़ाइर बॉक्स और दहन किो ों में में
लम्बित दरारें िेल्ड की जा सकती हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 305
(11) कोई भी स्टेबार िेल्ड नही ोंवकया जाएगा।
(12) इन विवनयमो ोंके प्रयोजनो ोंके वलए निीनीकृ त भाग को एक नए बॉयलर के वहस्से के रूप में
माना जाएगा, जो उस दबाि में उपयोग के वलए अवभप्रेत है, वजस पर निीनीकरण के तहत बॉयलर
का उपयोग वकया जाता है।
(13) स्भोक ट्यूबो ोंकी बट िेक्तल्डोंग के वलए स्भोक ट्यूब को फ्यूजन िेक्तल्डोंग, फ्लश िेक्तल्डोंग या
ऑक्सी-एवसवटलीन िेक्तल्डोंग द्वारा बट िेल्ड वकया जा सकता है, और इनका मुख्य वनरीिक के
वििेक पर हाइडरॉवलक रूप से परीिण वकया जाना चावहए।
321. विविवनमाषण वचत्र और बॉयलरो ंका वििरण अवग्रम रूप से प्रिुत करना- (1) भूवम बॉयलर और
बॉयलर घटको ों के मामले में, राज्यो ों में उपयोग के वलए भारत में बने स्पेयर सवहत, बॉयलर या बॉयलर
घटको ों के वनमायताओ ों जैसा भी मामला हो, द्वारा विविवनमायण वचि और सामग्री, वडजाइन और विवनमायण के
वििरण को उस राज्य के वनरीिण प्रावधकारी को जाोंच और अनुमोदन के वलए प्रस्तुत वकए जाएोंगे, जहाों
बॉयलरो ोंका विवनमायण शुरू होने से पहले बॉयलरो ोंके मुख्य भागो ोंका विवनमायण वकया जाएगा।
(2) भारत के बाहर बने बॉयलर और बॉयलर पुजों के राज्यो ों में उपयोग के मामले में, बॉयलर
के विविवनमायण वचि और सामग्री, वडजाइन और विवनमायण के वििरण, शुरू में विवनमायण करने िाले
देश में परीिा और अनुमोदन के वलए वनरीिण प्रावधकारी को प्रस्तुत वकए जाएोंगे।
(3) 100 टन/घोंटा और उससे अवधक की भाप उत्पन्न करने िाले बॉयलरो ों के मामले में विवनमायण
वचि और सामग्री, वडजाइन और विवनमायण का वििरण और बॉयलर घटको ोंऔर उसके पुजों सवहत
20 टन/घोंटा और उससे अवधक के अपवशष्ट स ताप बॉयलर के वििरण, उच्च शक्ति और उच्च
तापमान और दबाि में उपयोग के साथ निीनतम सामग्री के चयन के वलए और सुरिा के वलए
तकनीकी सलाहकार (बॉयलर) को प्रस्तुत वकए जाएोंगे। तत्पश्चात, बॉयलर के विवनमायण और
पोंजीकरण के समय उत्पन्न होने िाले प्रश्नो ों से बचने के वलए, वनरीिण प्रावधकारी द्वारा अनुमोवदत
विवनमायण वचि और सामग्री, वडजाइन और विवनमायण के वििरण को उस राज्य के मुख्य बॉयलर
वनरीिक, जहाों बॉयलर स्थावपत और उपयोग वकया जाएगा, को अोंवतम परीिण और विवनमायण
शुरू होने से पूिय अनुमोदन के वलए भेजा जाएगा।
(4) 100 टन/घोंटा से कम भाप उत्पन्न करने िाले बॉयलरो ोंके मामले में विवनमायण वचि और सामग्री,
वडजाइन और विवनमायण का वििरण और बॉयलर घटको ों और उनके पुजों सवहत 20 टन/घोंटा से
कम के अपवशष्ट स ताप बॉयलर के द्वारा अनुमोवदत वनरीिण प्रावधकरण उस राज्य के मुख्य बॉयलर
वनरीिक के समि अोंवतम परीिण और विवनमायण शुरू होने से पूिय अनुमोदन के वलए को प्रस्तुत
वकया जाएगा जहाों बॉयलर स्थावपत और उपयोग वकया जाएगा, तावक बॉयलर के विवनमायण और
पोंजीकरण के समय उत्पन्न होने िाले प्रश्न से बचा जा सके ।
(5) वनरीिण प्रावधकारी या मुख्य वनरीिक या दोनो,ों जैसा भी मामला हो, विवनमायण वचि और
वििरण की जाोंच के बाद प्रस्तािक को सूवचत करेगा वक क्या िे सामग्री, वडजाइन, विवनमायण और306 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
भागो ों और इक्तच्छत दबाि की उपयुिता से सोंतुष्ट स हैं और, यवद नही,ों तो उसमें क्या सोंशोधन
आिश्यक है। जब विवनमायण वचि और बॉयलर के वििरण को मोंजूरी दे दी गई हो, तो वनरीिक या
सिम व्यक्ति, जैसा भी मामला हो, अपनी जाोंच करने में यह देखेगा वक अनुमोवदत वडजाइन और
विवनमायण के वििरण का सािधानीपूियक पालन वकया गया है और क्या सामग्री वीकीकृ त वििरण के
साथ मेल खाती है ।
(6) पुजों सवहत बॉयलर और बॉयलर घटको ोंके विवनमायण वचि और सामग्री, वडजाइन और
विवनमायण के वििरण की वनधायररत पैमाने पर जाोंच के वलए उप-विवनयम (1) या (2)
के तहत शुल्क तावलका 8/3 में अवधकतम रु. 50,000 होगा। जब विवनमायण वचि की छानबीन की
गई हो और उनमें पररितयन के सोंबोंध में सुझाि वदया हो और यवद विवनमायण वचि शावमल पहले
सुझाए गए पररितयनो ों के अलािा अन्य पररितयन हैं, तो जाोंच के वलए शुल्क पहली जाोंच के 10
प्रवतशत की दर पर देय होगा।
(7) मौजूदा बॉयलर के सोंशोधनो ों या रूपाोंतरणो ों के व्यापक वििरण वदखाने िाली व्यिस्था के
वचि, राज्य के बॉयलर के मुख्य वनरीिक के अनुमोदन के अधीन होगों े जहाों बॉयलर सोंशोधन या
रूपाोंतरण पोंजीकृ त है।
(8) यवद विस्तृत विविवनमायण डराइोंग को उस राज्य के वनरीिण प्रावधकारी द्वारा अनुमोवदत
वकया गया हो जहाों भागो ों का विवनमायण और वनरीिण वकया जाएगा तो उप-विवनयम (7) के अलग
से अनुपालन की आिश्यकता नही ोंहै।
तावलका - 8/10
मैन्युफै क्चररंग डरॉइंग की जांच के वलए शुल्क (विवनयम 321)
श्रेणी उत्पाद विवनयमन गणना शुल्क रुपए में वटप्पवणयां
संख्या संख्या मानदंड
(1) (2) (3) (4) (5) (6)
1 बॉयलर, और 321(6) ताप सतह विवनयम 305 . में
बॉयलर के पुजे िेि वनवदयष्ट स अनुरूप शुल्क
जाोंच
स्पेयर सवहत
(अवधकतम रु.
50000)
2 बॉयलर, और 321 (6) ताप सतह जाोंच शुल्क का 10% पररितयन
बॉयलर के पुजे िेि
सवहत पुजे
322 . पाइपो ंका वनरीिण - (1) वनधायररत स्थान पर लगाने से पूिय पाइपो ों का परीिण वकया
जाएगा। परीिण में परीिण दबाि िह होना चावहए जो स्टीम पाइपो ों के वलए मानक पररक्तस्थवतयो ों के वलए[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 307
वनधायररत वकया गया है। वनरीिण प्रावधकारी से प्रपि -IV (भाग-ख), में एक प्रमाण पि, वजसमें कहा गया
हो वक यह उसके द्वारा वकया गया है, वीकीकार वकया जा सकता है। यवद सिम व्यक्ति परीिण से सोंतुष्ट स है,
तो पाइप को वनधायररत स्थान पर लगाया जा सकता है । मुख्य वनरीिक वनवदयष्ट स वकए जाने िाले दबाि और
तापमान पर उपयोग के वलए पाइप लाइन की उपयुिता के सोंबोंध में वीकामी को अपने अनुमोदन
की सूचना देगा।
(2) बॉयलर के बाद के वनरीिण में या वकसी अन्य समय पर, सिम व्यक्ति भाप-पाइप का
बाहरी वनरीिण कर सकता है और इस उद्देश्य के वलए फ्लैंजेस पर लैवगोंग के एक वहस्से को हटाने
की आिश्यकता हो सकती है, और पाइप बनाया जा सकता है। यवद इस वनरीिण के
पररणामवीकरूप सिम व्यक्ति की राय है वक पाइप या उस समय की कोई भी क्तस्थवत असोंतो जनक
है, तो िह मुख्य वनरीिक को मामले की ररपोटय करेगा, जो वकसी भी पाइप या पाइपो ोंकी पूरी लैवगोंग
को हटिा सकता है और उसका हाइडरॉवलक परीिण करिा सकता है। ऐसे हाईडरॉवलक परीिण में
दबाि परीिण बॉयलर के वडजाइन दबाि या पाइप के अवधकतम वीकीकायय कायय दबाि जैसा भी
मामला हो, के डेा गुना से कम नही ोंहोना चावहए।
(3) (क) स्टीम पाइप और वफवटोंग के सोंबोंध में प्रपि सोंख्या XIV में वनरीिण पुक्तस्तका का एक ज्ञापन
तैयार वकया जाएगा। इस पुस्तक में, वनरीिक, भाप पाइप और वफवटोंग के सभी वििरणो ों और
आयामो ोंको वलक्तखत रूप में दजय करेगा, वजसमें विवभन्न भागो ोंके वलए गणना, हाईडरॉवलक परीिण के
वििरण और उनके वनरीिण नोट शावमल हैं।
(ख) बाद के वनरीिण में, सिम व्यक्ति वनरीिण और हाईडरॉवलक परीिण की तारीख को नोटो ों के
साथ दजय करेगा।
(ग) सिम व्यक्ति, स्टीम पाइप और वफवटोंग की सामान्य क्तस्थवत, और मरम्मत, पररितयन के
प्रवतस्थापन, यवद कोई हो, और वजस हद तक स्टीम पाइप को लैवगोंग और किररोंग से साफ वकया
गया हो, के बारे में वनरीिण पुस्तक वटप्पणी के ज्ञापन में भी दजय करेगा। यह पुस्तक बाद के वनरीिण
में सिम व्यक्ति की जानकारी और मागयदशयन के वलए स्टीम-पाइप और वफवटोंग का एक उपयोगी
ररकॉडय प्रदान करती है।
(घ) वकसी पाइप लाइन या उसकी वफवटोंग के दुघयटनाग्रस्त होने की क्तस्थवत में, आिश्यक वटप्पवणयो ों
को भी पुस्तक में दजय वकया जाएगा।
(ङ) मेमोरेंडम पुक्तस्तका मुख्य वनरीिक को प्रस्तुत की जाएगी, जो सभी वििरणो ों और गणनाओ ों
की जाोंच करेगा और पाइप लाइन और वफवटोंग के विवभन्न वहस्सो ों के वलए अनुमत अवधकतम
वीकीकायय काययशील दबाि और तापमान को मोंजूरी देगा । विशे भाप पाइप लाइन के वलए एक
बार वीकीकृ त दबाि और तापमान में मुख्य वनरीिक के वलक्तखत प्रावधकार के अलािा कोई
पररितयन नही ोंवकया जाएगा।
323. टीम-पाइपो ंकी योजना की प्रिुवत- (1) माउोंवटोंग और वफवटोंग सवहत स्टीम पाइप की योजनाएों
वनमायण से पूिय वनरीिण प्रावधकारी को, और बॉयलर के पोंजीकरण के समय मुख्य वनरीिक को इस वनणयय308 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
के वलए वक पाइप और उनकी व्यिस्था वनयमो ों का अनुपालन करती है या नही,ों वनधायररत शुल्क के साथ
प्रस्तुत की जाएोंगी।
(2) (क) स्टीम पाइप का विवनमायण शुरू होने से पूिय, योजनाओ ोंकी जाोंच और सामग्री के वििरण,
वडजाइन और स्टीम पाइप के विवनमायण के वलए शुल्क तावलका - 8/11 में वनवदयष्ट स दर
पर होगा ।
(ख) योजनाओ ों और सामग्री के वििरण, वकसी भी वफवटोंग, माउोंवटोंग के वडजाइन और विवनमायण
और डी-सुपरहीटर, स्टीम ररसीिर, सेपरेटर जैसी वफवटोंग के वलए जाोंच शुल्क, शुल्क तावलका 8 /
11 में वनवदयष्ट स दर पर होगा ।
तावलका - 8/11
टीम पाइप और वफवटंग की योजनाओ ंकी जांच के वलए शुल्क (विवनयम 323)
श्रेणी उत्पाद विवनयमन गणना मानदंड शुल्क वटप्पवणयां
संख्या संख्या रुपए में
(1) (2) (3) (4) (5) (6)
1 स्टीम पाइप की 323(2)(क) 30 200 जाोंच
योजनाएों मीटर पाइवपोंग या
(न्यूनतम
उसका वहस्सा
500
रुपए)
2 स्टीम पाइप की 323(2)(क) जाोंच शुल्क के स्क्रू टनी पररितयन
योजनाएों आधार पर शुल्क
का 10%
3 वफवटोंग, माउोंवटोंग और 323(2)(ख) समान वफवटोंग प्रत्येक जाोंच और पररितयन
कों पोनेंटटस (वबना हीट की प्रत्येक श्रेणी श्रेणी के
टराोंसफर के ) जैसे िॉल्व, वलए 300
वडश एोंड, हैंड होल
किर, मैन होल किर,
फ्लैंजेस आवद।
4 डी-सुपरहीटसय, 323(2)(ख) समान प्रत्येक जाोंच और पररितयन
स्टीम ररसीिसय, सेपरेटसय वफवटोंग की श्रेणी
जैसी वफवटोंग्स प्रत्येक श्रेणी के वलए
500[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 309
नोट: जाोंच: विवनमायण वचिो ोंकी जाोंच।
पररितयन: विवनमायण वचि में पररितयन।
324 . भारत में वनवमषत बॉयलर और उनके भाग के वलए वनरीिण शुल्क - भारत में वनवमयत बॉयलरो ों
और उनके पुजों के वलए वनरीिण शुल्क, तावलका 8 /12 में वनवदयष्ट स शुल्क के अनुसार होगा।
तावलका - 8 / 12
भारत में वनवमषत बॉयलर और उसके भाग के वलए वनरीिण शुल्क (विवनयम 324)
श्रेणी उत्पाद गणना मानदंड वनरीिण शुल्क रुपए इनपुट वटप्पवणयां
संख्या में
(1) (2) (3) (4) (5) (6)
1 बॉयलर ताप िेिफल एचएसए * सोंबोंवधत दबाि भाग प्रमाणपि के
(वनमायताओ ों (एचएसए) शुल्क विवनयम 305 * व्यिस्था निीनीकरण के
के करिाने 4 में वनवदयष्ट स है (पीपीए) वलए वनरीिण
पर) डरॉइोंग शुल्क का 4
गुना
( विवनयम 305 )
2 ट्यूब और प्रवत मीवटरक टन या 360 िजन,
पाइप उसका भाग मीवटरक
टन में
3 बॉयलर ताप िेिफल एचएसए सोंबोंवधत पीपीए प्रमाणपि के
(विवनमायण शुल्क विवनयम 305 4 डराइोंग निीनीकरण के
स्थल पर) में वनवदयष्ट स है वलए वनरीिण
शुल्क का 4
गुना
( विवनयम 305)
4 फोज्ड़य पाइप <= 25 50 या 225 सामान्य फोज्ड़य और
वफवटोंग वममी उसके बोर और कास्ट फ्लैंजेस
भाग के बैच के वलए वनवदयष्ट स
बैच के आकार दर पर
वलए (अवधवनयम
<= 25 100 या 390 326)
वममी उसके
भाग के
बैच के
वलए
> 25 50 या 435
वममी उसके310 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
<= 50 भाग के
वममी बैच के
वलए
> 25 435
50 वममी या उसके
<= 100 भाग
वममी के बैच के
वलए
> 100 10 या 465
वममी उसके
<= 250 भाग के
वममी बैच के
वलए
> 250 5 या 540
वममी उसके
भाग के
बैच के
वलए
5 फोर्ज्य पाइप <= 25 50 या 450 सामान्य फोर्ज्य और
वफवटोंग के वममी उसके बोर और कास्ट फ्लैंजेस
अलािा अन्य भाग के बैच के वलए वनवदयष्ट स
पाइप बैच के आकार दर पर
वफवटोंग वलए (अवधवनयम
<= 25 100 या 780 326)* 2
वममी उसके
भाग के
बैच के
वलए
> 25 50 या 870
वममी उसके
<= 50 भाग के
वममी बैच के
वलए
> 50 25 या 870
वममी उसके
<= 100 भाग के
वममी बैच के
वलए
> 100 10 या 930
वममी उसके[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 311
<= 250 भाग के
वममी बैच के
वलए
> 250 5 या 1080
वममी उसके
भाग के
बैच के
वलए
6 पाइप और प्रवत मीटर 10 लोंबाई
ट्यूब बेंड (न्यूनतम 300) मीटर में
325. पाइपो ंके वलए वनरीिण शुल्क - पाइपो ों के वलए वनरीिण शुल्क, तावलका 8 / 13 में वनवदयष्ट स शुल्क
के अनुसार होगा ।
तावलका 8 /13
पाइपो ंके वलए वनरीिण शुल्क (विवनयम 325)
श्रेणी उत्पाद गणना मानदंड वनरीिण शुल्क इनपुट
संख्या रुपए में
(1) (2) (3) (4) (5)
1 पाइपो ों(डी- एनबी <= 30 मीटर 500 लोंबाई मीटर
सुपरहीटसय, स्टीम 100 वममी पाइप या (न्यूनतम 500) में
ररसीिसय, फीड हीटर उसके वहस्से
और अलग से फायर के वलए
वकए गए सुपरहीटसय एनबी> 100 30 मीटर 1200
जैसी वफवटोंग्स को वममी पाइप या ( न्यूनतम
छोड़कर सभी उसके वहस्से 1200 )
वफवटोंग्स सवहत) के वलए
326. िाल्वो ं और फ्लैंजो ं के वलए वनरीिण शुल्क - िाल्वो ों और फ्लैंजो ों के वनरीिण के वलए शुल्क,
तावलका 8 / 14 में वनवदयष्ट स शुल्क के अनुसार वलया जाएगा।
तावलका 8 /14
िाल्व और फ्लैंजेस के वलए वनरीिण शुल्क (विवनयम 326)
श्रेणी उत्पाद गणना मानदंड वनरीिण इनपुट वटप्पवणयां
संख्या शुल्क
(रुपए में)
(1) (2) (3) (4) (5) (6)
1 िाल्व <= 25 15 प्रवत मामूली न्यूनतम 600312 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वममी पीस वछद्र रुपए प्रवत
> 25 45 प्रवत वनरीिण
वममी पीस
<= 100
वममी
> 100 270 प्रवत
वममी पीस
<= 250
वममी
> 250 720 प्रवत
वममी पीस
2 जाली और <= 25 50 225 सामान्य
कास्ट फ्लैंजेस वममी या उसके भाग बोर
के बैच के और बैच
वलए आकार
<= 25 100 या 390
वममी उसके भाग के
बैच के वलए
> 25 50 या उसके 435
वममी भाग के बैच
<= 50 के वलए
वममी
> 50 25 या उसके 435
वममी भाग के बैच
<= 100 के वलए
वममी
> 100 10 या उसके 465
वममी <= भाग के बैच
250 वममी के वलए
> 250 5 या उसके 540
वममी भाग के बैच
के वलए
3 प्लेट फ्लैंजेस <=25 50 या उसके 112 सामान्य फोर्ज्य और
वममी भाग के बैच बोर और कास्ट
के वलए बैच फ्लैंजेस के
<=25 100 या 195 आकार वलए प्रभाररत
वममी उसके भाग के दर की तुलना
बैच के वलए के आधार पर
> 25 50 या उसके 217
वममी भाग के बैच[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 313
<= 50 के वलए
वममी
> 50 25 या उसके 217
वममी भाग के बैच
<= 100 के वलए
वममी
> 100 10 या उसके 232
वममी <= भाग के बैच
250 वममी के वलए
> 250 5 या उसके 270
वममी भाग के बैच
के वलए
327. िाल्वो ं के घटको ं के वनरीिण के वलए शुल्क - िाल्वो ों के घटको ों के वनरीिण के वलए शुल्क
वनम्नानुसार वलया जाएगा:
(1) िाल्व वनरीिण का 50% वनरीिण शुल्क उस राज्य के मुख्य वनरीिक द्वारा वलया जाएगा
जहाों घटको ों के परीिण के वलए िाल्व के घटक विवनवमयत वकए जाते हैं जो उस राज्य से अलग है
जहाों पुजों को जोड़ा जाना है और शे 50% वनरीिण शुल्क उस राज्य के मुख्य वनरीिक द्वारा
िसूल वकया जाएगा, जहाों िाल्वो ोंके जोड़ा जाना है और अोंवतम वनरीिण के वलए वनवमयत वकया जाता
है।
(2) जहाों तक सामग्री परीिण का सोंबोंध है, यवद वनरीिण वकसी "सुप्रवसद् फाउोंडरी" या "
सुप्रवसद् फोजय" द्वारा वकया गया है, तो पूणय वनरीिण शुल्क उस राज्य के मुख्य वनरीिक द्वारा वलया
जाएगा जहाों िाल्व वनवमयत वकया गया है और अोंवतम परीिण वकया गया है।
(3) जहाों िाल्व के घटको ोंका वनरीिण और परीिण उसी विवनमायण कारखाने में वकया जाता है
जहाों िाल्वो ों को वनवमयत वकया जाता है और अोंवतम परीिण वकया जाता है तो उस राज्य के मुख्य
वनरीिक द्वारा पूणय वनरीिण शुल्क वलया जाएगा जहाों विवनमायण कारखाना क्तस्थत है।
(4) यवद वकसी राज्य में घटको ों का विवनमायण, एक फमय द्वारा वकया जाता है और अोंततः िाल्व
की वफवटोंग और असेंबली दूसरी फमय द्वारा की जाती है, तो दोनो ों फमों को 50:50 के आधार पर
वनरीिण शुल्क का भुगतान करना होगा।
328 . फीड िॉटर हीटर और अन्य वफवटंग के वलए वनरीिण शुल्क - फीड िॉटर हीटर और अन्य
वफवटोंग के वलए वनरीिण शुल्क तावलका 8 / 15 में वनवदयष्ट स शुल्क के अनुसार होगा-314 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 8 /15
फीड िॉटर हीटर और अन्य वफवटंग के वलए वनरीिण शुल्क
श्रेणी उत्पाद गणना मानदंड वनरीिण इनपुट
संख्या शुल्क रुपए
में
(1) (2) (3) (4) (5)
1 फ़ीड िॉटर हीटर और अन्य प्रवत हीटर 10000 मािा
वफवटोंग
2 डी-सुपरहीटर, स्टीम प्रवत वफवटोंग 2500 मािा
ररसीिर और अलग से
फायर वकए गए सुपरहीटर
329. मावकिं ग - (1) काबयन स्टील ट्यूब या पाइप, जो बाहरी व्यास 50 वममी से अवधक या 1000 वममी
से अवधक लोंबाई के हैं, उन पर स्पष्ट स रूप से दशायने के वलए वनम्न वििरण छापा जाएगा-
(क) स्टील के प्रकार के वलए पहचान वच्।
(ख) विवनमायण का िाोंड; तथा
(ग) क्या सीमलेस या विदटयुत प्रवतरोध िेल्डेड ट्यूब या पाइप हैं।
(2) काबयन स्टील ट्यूब या पाइप का बाहर का व्यास 50 वममी से कम या 1000 वममी से कम
लोंबाई के मामले में, उप-विवनयमन-(1) में वनवदयष्ट स सूचना को बोंडल या बॉक्स से सुरवित रूप से जुड़े
टैग पर छापा जाएगा।
(3) वमश्र धातु इस्पात ट्यूबो ों या पाइपो ों के वलए ट्यूबो ों या पाइपो ों पर वनशान नही ों लगाए
जाएोंगे। उप-विवनयमन-(1) में वनवदयष्ट स जानकारी को प्लेन एोंड पाइप के अोंवतम भाग पर या फ्लैंजेस के
ररम पर या पाइप या ट्यूब से उपयुि रूप से जुड़ी पहचान प्लेटो ोंपर मुहर लगाई जाएगी। वमश्र धातु
स्टील ट्यूब या पाइप पर वनरीिण या पहचान के वनशान वचवित की जा सकती हैं, बशते इन पर
आयरन ऑक्साइड बेस या टाइटेवनयम बेस पेंट का उपयोग वकया जाता है।
(4) एक विदेशी मानक या कोड के अनुरूप ट्यूब या पाइप, वजसे विवनयम 3(2) के तहत
वीकीकार वकया गया है, उस मानक या कोड के प्रािधान के अनुसार, जैसा भी मामला हो, अोंकन पर
मुहर लगाई जाएगी।
330. पुजों और बॉयलर घटको ंके वलए वनरीिण शुल्क - पुजों और बॉयलर घटको ों के वलए वनरीिण
शुल्क तावलका 8/16 में वनवदयष्ट स शुल्क के अनुसार होगा ।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 315
तावलका 8/16
पुजों और बॉयलर घटको ंके वलए वनरीिण शुल्क
श्रेणी संख्या उत्पाद गणना वनरीिण शुल्क इनपुट
मानदंड रुपए में
(1) (2) (3) (4) (5)
1 पुजे और बॉयलर घटक ताप तल विवनयम 305 . में डराइोंग में वनवदयष्ट स
(सभी प्रकार की कॉइि िेिफल वनवदयष्ट स शुल्क ताप तल िेिफल
अथायतट इकोनॉमाइजर
कॉइि, सुपरहीटर
कॉइि, रीहीटर
कॉइि)
2 ट्यूब और ट्यूब बेंडटस प्रवत मीटर 10 लोंबाई मीटर में
(न्यूनतम 500
रुपए )
नोट: जहाों कही ोंभी बॉयलर घटको ों को मुख्य बॉयलर वनमायता द्वारा विहृे ता कारखानो ों में विवनमायण के वलए
आउटसोसय वकया जाता है, और यवद वनरीिण शुल्क का भुगतान मुख्य बॉयलर वनमायता द्वारा वकया जाता है,
तो विहृे ता द्वारा वनरीिण शुल्क का भुगतान करने की आिश्यकता नही ोंहै।
331. िेल्डरो ं या िेल्पल्डंग ऑपरेटरो ंका परीिण शुल्क - (1) इन विवनयमो ों के तहत िेल्डरो/ों िेक्तल्डोंग
ऑपरेटरो ों की जाोंच के वलए शुल्क 600 रुपए होगा और यह आिेदक या प्रायोजक, जैसा भी मामला हो,
द्वारा िहन वकया जाएगा, और इसके अलािा, आिेदक या प्रायोजक अन्य सभी खचों जैसे सामग्री की
लागत और काययशाला और सिम प्रावधकारी द्वारा वनधायररत परीिण सुविधाओ ों को िहन करेगा।
(2) िेल्डर प्रमाण पि की एोंडोसेमेंटय के वलए शुल्क 200 रुपए होगा और आिेदक या प्रायोजक , जैसा
भी मामला हो द्वारा िहन वकया जाएगा।
(3) डुप्लीके ट प्रमाण पि जारी करने के वलए शुल्क 300 रुपए होगा।
332. जुमाषना: (1) जो कोई भी इन विवनयमो ोंका उिोंघन करते हुए वकसी व्यक्ति को बॉयलर या स्टीम-
पाइप की िेक्तल्डोंग में वनयोवजत करता है, िह अवधवनयम की धारा 31 के तहत जुमायने का भागी होगा।
(2) कोई भी मरम्मतकताय का वनमायता, जो विवनयम 542 के तहत आिश्यक ररकॉडय को बनाए रखने में
विफल रहता है, िह अवधवनयम की धारा 31 के तहत जुमायने का भागी होगा।
.316 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय - 9
बॉयलर के अंदर व्यल्पियो ंकी सुरिा
333. बॉयलर के अंदर काम करने िाले व्यल्पियो ं की सुरिा- (1) मावलक या प्रभारी व्यक्ति द्वारा
वकसी भी व्यक्ति को वकसी भी उद्देश्य के वलए स्टीम बॉयलर के अोंदर जाने के वलए वििश नही ोंवकया
जाएगा या अनुमवत नही ोंदेगा, जब तक वक बॉयलर को इस विवनयम में बताए गए वनधायररत तरीके से
वकसी दूसरे बॉयलर के साथ भाप या गमय पानी के सोंचार से प्रभािी ढोंग से वडस्कनेर न कर वदया
जाए।
(2)(क) प्रभािी वडस्कनेक्शन या तो बॉयलर स्टॉप िाल्व को हटाकर या वकसी अन्य बॉयलर या
िेसेल या भाप या गमय पानी युि पाइप से सभी भाप और गमय पानी के कनेक्शन से पाइवपोंग को
हटाकर और बॉयलर स् टॉप िाल्ि और पाइवपोंग के बीच पयायप्त खाली फ्लेंजो ों को लगाकर वकया
जाएगा।
(ख) स्टॉप िाल्व, स्टॉप कॉक या वीकचावलत आइसोलेवटोंग िाल्व को बोंद करना, इस विवनयम का
अनुपालन नही ोंमाना जाएगा।
(ग) हालाोंवक, िेल्डेड पाइप िकय के मामले में, यवद कम से कम 50 वममी आोंतररक व्यास (बोर)
का एक िेंट पाइप, मुख्य स्टॉप िाल्व और स्टीम मेन के इोंटरमीवडएट स्टॉप िाल्व के बीच और फीड
चेक िाल्व और इोंटरमीवडएट चेक िाल्ि के बीच फीड लाइन पर लगाया जाता है तो, इस विवनयमन
का अनुपालन माना जाएगा, बशते वक ऐसे िेंट पाइप बोल्ट्-ऑन ब्लैंक फ्लेंजो ोंके साथ वफट वकए गए
हो,ों और फ्लेंजो ों को हटा वदया गया हो तावक भाप या पानी के वकसी भी ररसाि को िायुमोंडल में
प्रभािी ढोंग से वडस्चाजय वकया जा सके , वजससे दोनो ोंतरफ के िाल्ि को बोंद वकया गया है।
(3) बॉयलर का मावलक वजस पर यह विवनयम लागू होता है, िह मुख्य वनरीिक से वलक्तखत
रूप में वडस्कनेक्शन की विवध का अनुमोदन प्राप्त करेगा वजसका िह उपयोग करने का प्रस्ताि
करता है और यह सुवनवश्चत करने के वलए वजम्मेदार होगा वक इस प्रकार अनुमोवदत पद्वत का
व्यिहार में पालन वकया जाए।
(4) जब बॉयलर शेल या डरम या बॉयलर के भीतर वकसी भी सीवमत स्थान के अोंदर काम करने
के वलए विदटयुत प्रकाश का उपयोग वकया जाता है, तो िोल्ट्ेज 24 िोल्ट् से अवधक नही ोंहोगी और
बॉयलर का मावलक अनुमोवदत प्रकार के लैम्प-गाडय के साथ एक हैंड लैंप, कीलेस सॉके ट इोंसुलेटेड
हैंडल और एक्स्टेंशन कॉडय प्रदान करेगा।
(5) जहाों बॉयलर के अोंदर वकसी भी उपकरण को काम करने के वलए वबजली का उपयोग वकया जाता है,
िहाों उपकरण के धातु िाले वहस्से को प्रभािी ढोंग से अथय वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 317
अध्याय - 10
इलेिरोड बॉयलर
भाग -1
334. अनुप्रयोग - यह अध्याय वकसी भी काययशील दबाि के वलए सभी िोल्ट्ेज के वलए और 343 वडग्री
सेक्तियस तक के तापमान के वलए इलेररोड स्टीम बॉयलरो ोंपर लागू होता है और इलेररोड बॉयलर के िल
वनम्नवलक्तखत बनािट के होगों े:
(क) फ्यूजन िेल्डेड स्टील बॉयलर;
(ख) सीमलैस शेल स्टील बॉयलर।
335. सामान्य आिश्यकताएँ- जहाों भी लागू हो,ों वनमायताओ,ों वनरीिण अवधकाररयो ों आवद से सोंबोंवधत
प्रमाण पिो ोंसे जुड़े अध्याय - 1 प्रािधानो ोंऔर वनमायण से सोंबोंवधत अध्याय - 3 के प्रािधानो ोंका पालन वकया
जाएगा।
336. सामग्री- इलेररोड बॉयलर के सोंरचनात्मक भागो ोंके वलए सामग्री विवनदेश, स्टील प्लेट के वलए
प्रमाण पि, और विवनमायण और परीिण के तरीके , रासायवनक सोंरचना,विवनमायण की प्रवहृया के सोंबोंध में
अध्याय 2 का अनुपालन करेंगे, बशते वक अवधकतम तय यता तनाि और सामग्री का एलाोंगेशन नीचे दी गई
सीमाओ ोंके बीच हो:-
(क) फ्यूजन िेल्डेड वनमायण के वलए, जैसा वक अध्याय – 2 में वदया गया है।
(ख) सीमलैस वनमायण के वलए, जैसा वक विवनयम 250 में बताया गया है और सीमलैस काबयन स्टील
पाइप के वलए जैसा वक विवनयम 253 की तावलका 7/3 में बताया गया है।
भाग-2
337. फ्यूजन िेल्डेड बॉयलर का वनमाषण और कारीगरी- फ्यूजन िेल्डेड डरम के वलए वनमायण और
कारीगरी अध्याय -4 में वदये गए प्रािधान का वनम्नवलक्तखत शतों के अधीन पालन करेगी, अथायतट:
(क) श्रेणी-I के बॉयलर अध्याय - 4 की आिश्यकता का अनुपालन करेंगे;
(ख) िेक्तल्डोंग द्वारा एोंड प्लेट कनेक्शन के वलए, इस विवनयम के वचि 10/1 में वदखाए गए सीम के प्रकार
को अपनाया जा सकता है;
(ग) श्रेणी-II के बॉयलर वनम्नवलक्तखत आिश्यकताओ ों का पालन करेंगे;
(घ) लम्बित सीम विवनयम 152 का अनुपालन करेगी और िेक्तल्डोंग करके एोंड प्लेट कनेक्शन के वलए
वनम्नवलक्तखत में से वकसी भी प्रकार के सीम को अपनाया जा सकता है (इस विवनयम के वचि 10/1 से 10/6
को देखें)।318 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पररधीय सीम के वलए िेल्डेड जोडो ंके प्रकार -
बॉयलर के सभी िगों के वलए स्वीकायष
वचत्र. 10 / 4
श्रणी-II के बॉयलरो ंके वलए 508 वममी व्यास
वचत्र. 10 / 1 तक के वलए फ्लैट एंड प्लेटो ंके वलए िेल्डेड
जोडो ंके प्रकार
वचत्र. 10 / 2
वचत्र. 10 / 5
वचत्र. 10 / 3
वचत्र. 10 / 6
सभी आयाम एमएम में हैं।
नोटः
1. श्रेणी-I के बॉयलर, वजनमें वडजाइन दबाि 11 वकलोग्राम / सेमी 2 (जी) से अवधक हो या वकलोग्राम /
सेमी 2 (जी) में उत्पाद वडजाइन दबाि और आोंतररक व्यास 1400 सेंटीमीटर से अवधक हो।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 319
2. श्रेणी-II बॉयलर, वजनमें वडजाइन दबाि 11 वकलोग्राम / सेमी 2 (जी) और इससे कम हो या वडजाइन
दबाि का उत्पाद वकग्रा / सेमी 2 (जी) में हो और आोंतररक व्यास 1400 सेंटीमीटर से कम हो।
3. सीमलेस शेल बॉयलरो ों के वलए और श्रेणी-II के 19 वममी से अवधक मोटी प्लेटो ों के िेल्डेड बॉयलर के
वलए प् लेटो ों के वकनारो ोंके बीच के अोंतराल हेतु पररधीय सीमो ों के वलए िेल्डेड जोड़ो ों के प्रकार स् िीकायय है,
वजस पर वनरीिण प्रावधकारी और विवनमायता द्वारा सहमवत व्यि की जाती है।
भाग-3
श्रेणी-I के फ्यूजन िेल्डेड सीमो ंके वलए परीिण
338. परीिण टुकडो ं का चयन- (1) वनम्नवलक्तखत परीिण के वलए प्रत्येक लम्बित सीम पर प्लेटो ों की
परीिण प्लेट से परीिण टुकड़ो ों का चयन, इस विवनयम के वचि 10/7 में वदये गए अनुसार वकया जाएगा
और िे पहचान के वलए सिम व्यक्ति द्वारा मुहर लगाई जाएगी:
(क) िेल्डेड सीम के वलए एक तन्यता परीिण नमूना;
(ख) दो बेंड परीिण नमूने;
(ग) एक वनक िेक परीिण नमूना।
(2) परीिण प्लेटो ों के प्रत्येक सेट के शे को वकसी भी आिश्यक पुन: परीिण के वलए रखा
जाएगा। पुन: परीिण के वलए वकसी भी नमूने को मूल नमूने के समान परीिण प्लेटो ों के सेट से
काटा जाएगा।
वचत्र. 10/7 : परीिण प्लेट स का वििरण
(3) शेल के बाहर और अोंदर के अनुरूप तन्यता और बेंड के नमूनो ोंकी सतह को के िल हल्के ढोंग से तैयार
वकया जाना चावहए तावक मूल धातु की रोल की हुई सतह पूरी तरह से हट न जाए, इसके वसिाय जहाों
सोंलग्न प्लेटो ोंकी रोल की हुई सतह एक दूसरे के साथ समतल न हो,ों िेल्ड के प्रत्येक सतह पर एक प्लेट को
वघसा जा सकता है बशते हटाई गई धातु की गहराई 0.8 वममी से अवधक न हो ।320 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
339. तन्यता परीिण- (क) नमूने को िेल्डेड सीम के वियक काटा जाएगा (विवनयम 338 का वचि X/7
देखें ) और यह िेल्डेड सीम पर प्लेट की पूरी मोटाई का होगा और चौड़ाई ‚W‛ उतनी ही बड़ी होगी
वजतनी परीिण मशीन उवचत रूप से अनुमवत दे, बशते वक प्रभािी हृॉस-सेक्शनल िेि 322.5 िगय वममी से
कम हो। (नीचे वचि 10/8 देखें)।
(ख) िेल्डेड सीम नमूने का अोंवतम तन्यता बल प्लेट के वलए वनवदयष्ट स वनचली सीमा से कम नही ोंहोना चावहए
(विवनयम 37 के तहत देखें)।
वचत्र. 10/8 : जोड के वलए तन्यता परीिण
340. बेंड परीिण- (1)(क) िेल्डेड सीम के वलए दो बेंड परीिण वकए जाएोंगे।
(ख) एक नमूने का परीिण बाहरी सतह या तनाि में िेल्ड के साथ वकया जाएगा, और दूसरे को आोंतररक
सतह के तनाि के साथ वकया जाएगा।
(ग) नमूना खोंड में आयताकार होगा और उसे िेल्ड से वियक आकार में काटा जाएगा तावक उसकी
चौड़ाई प्लेट की मोटाई के 1½ गुने से कम न हो।
(घ) नमूनो ों के नुकीले कोनो ों को इस प्रकार गोल वकया जाएगा वक उसकी विज्या नमूने की मोटाई के दस
प्रवतशत तक हो।
(2) (क) जहाों प्लेट की मोटाई 32 वममी से अवधक न हो, िहाों नमूने की मोटाई परीिण प्लेट की पूरी
मोटाई के बराबर होगी।
(ख) जहाों प्लेट की मोटाई 32 वममी से अवधक हो, िहाों नमूने की मोटाई कम से कम 32 वममी होनी
चावहए।
(ग) तनाि िाले िेल्ड की बाहरी सतह का परीिण वकया जाने िाला नमूना, िेल्ड की आोंतररक सतह की
धातु से स् थानीय रूप से काटकर तैयार वकया जाएगा, तावक िाोंवछत मोटाई का नमूना प्राप्त हो सके ।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 321
(3) (क) तनाि में आोंतररक सतह के साथ परीिण वकए जाने िाले नमूने को धातु को िेल्ड की बाहरी सतह
पर स्थानीय रूप से समाप्त करने के वलए काटकर तैयार वकया जाएगा तावक िाोंवछत धातु की
मोटाई प्राप्त हो सके ।
(ख) जहाों प्लेट की मोटाई अनुमवत दे, दोनो ोंनमूने प्लेटो ोंमें एक के ऊपर एक क्तस्थत होते हैं।
(ग) प्रत्येक नमूने को सपोटय के बीच वमडिे िेल्ड पर माउण्ट वकया जाएगा, जो नमूने की मोटाई से 5.2
गुना अवधक की दूरी पर अलग रखा जाएगा और सपोटय के माध्यम से उसे पुश वकया जाएगा,
वजसमें पूिय का व्यास नमूना की मोटाई के तीन गुना के बराबर हो (अध्याय 4 के विवनयम 160 के
वचि 4/6 देखें)।
(4) (क) परीिण के पूरा होने पर, नमूने की बाहरी सतह पर कोई दरार या दो पूरे नमूने में मापने
पर 1.5 वममी या नमूना की लोंबाई के साथ मापने पर 3 वममी से अवधक नही ोंहोगा।
(ख) नमूने के वप्रमेच् योर फे ल् योर को अवीकीकृ वत का कारण नही ोंमाना जाएगा (वचि 4/6 देखें, नमूना क)।
341. वनक ब्ेक परीिण –(क) नमूना खोंड में आयताकार होगा और खाोंचे के वियक काटा जाएगा तावक
इसकी चौड़ाई इसकी मोटाई के आधे से कम न हो।
(ख) लॉट को नमूने के िेल्ड के कें द्र से एक तरफ से और िेसल के बाहरी ओर से परपेंवडकु लर काटा
जाएगा।
(ग) वफर नमूने को िेल्ड पर से तोड़ा जाएगा और फ्रै क्चर से पता चलेगा वक यह एक मजबूत सजातीय-िेल्ड
है, जो लैग समािेशन, पोरोवसटी और मोटे वहृस्टलीयता से काफी हद तक मुि है।
342. पुन: परीिण- यवद कोई भी परीिण विफल हो जाता है, तो उसी प्लेट से काटे गए नमूनो ोंपर पुन: दो
परीिण वकए जाएोंगे और पुन वकए गए दोनो:ों परीिणो ोंको वनवदयष्ट स आिश्यकताओ ों को पूरा करना होगा।
343. परीिण के बाद नमूने- यवद वनरीिण प्रावधकारी द्वारा आिश्यक समझा जाएगा, तो परीिण के बाद
नमूने जाोंच के वलए भेजे जाएोंगे।
344. ताप प्रवहृया- सभी फ्यूजन िेल्डेड इलेररोड बॉयलरो ों को ताप प्रवहृया से तनाि मुि वकया
जाएगा। ताप प्रवहृया विवनयम 123 के अनुसार होगी ।
345. हाइडरोवलक परीिण - हाइडरोवलक परीिण विवनयम 167 का अनुपालन करेगा
346. अवधकतम स्वीकायष कायषशील दबाि का वनधाषरण- (1) फ्यूजन िेल्डेड सीम के साथ बेलनाकार
शैलो ोंके अवधकतम वीकीकायय काययशील दबाि की गणना वनम्नवलक्तखत सूि से की जाएगी:
P = (t-2) x S x c / D समीकरण (10/1)
जहाों
t = एक इोंच के तीस सेकों ड में शेल प्लेट की मोटाई,
D = शेल का आोंतररक व्यास, इोंच में322 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
S = टन प्रवत िगय इोंच में अोंवतम तन्यता तनाि,
c = श्रेणी-I के बॉयलर के वलए 32,
c = श्रेणी-II के बॉयलरो ोंके वलए 27,
(2) फ्यूजन िेल्डेड सीम के साथ बेलनाकार शेल की मोटाई वकसी भी क्तस्थवत में नीचे दी गई
तावलका से कम नही ोंहोनी चावहए:
तावलका 10/1 : फ्यूजन िेल्डेड शेल के वलए न्यूनतम मोटाई
हृम सों. श्रेणी आोंतररक व्यास (वममी) न्यूनतम मोटाई (वममी)
(1) (2) (3) (4)
1 II (क) 610 सवहत 610 तक 6
(ख) 610 से अवधक 914 तक और 914 सवहत 8
(ग) 914 से अवधक 10
(3) वकसी भी क्तस्थवत में, बेलनाकार शैलो ोंऔर वसरो ोंका सुरिा कारक 4 से कम नही ोंहोगा।
347. मेनहोल और ब्ांचेज के वलए िेल्ड और प्रवतपूवतष - मेनहोल और ओिर ओपवनोंग में वफट वकए
गए िेल्डेड प्रवतपूवतय ररोंग वचि 10/9 से 10/13 के अनुरूप होगों े।
वचत्र. 10/10 : आंतररक िवतपूवतष ररंग
वचत्र. 10/9 : बाहरी िवतपूवतष ररंग[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 323
वचत्र. 10/12 : वडश एंड प्लेट में अण्डाकार
वचत्र. 10 /11 : अण्डाकार मेनहोल फ्लैंर्जड फ्रे म
प्रेड मेनहोल
िेल्डेड टू शेल
वचत्र. 10/13 : अण्डाकार मेनहोल फ्रे म जो वडश एंड प्लेट में िेल्डेड हो
सभी आयाम वम.मी. में हैं।
348. मेनहोल और शेल में अन्य खुले थान –(क) बॉयलर में मेनहोल और अन्य खुले स्थान को वकसी
भी िेल्डेड सीम से दूर रखा जाएगा और अोंडाकार खुले स्थान को बॉयलर की लम्बित कें द्र रेखा के
समानाोंतर उनके लघु अि के समानान्तर व्यिक्तस्थत वकया जाएगा।
(ख) गैर-प्रवतपूवतय प्रदत्त और प्रवतपूवतय प्रदत्त खुले स्थान विवनयम 179 का पालन करेंगे ।
349. अितल पि पर दबाि के साथ वडश्ड एंड प्लेटें – यह विवनयम 174, 176 और 177 का अनुपालन
करेगा ।
350. अनटेड फ्लैट एंड प्लेटें- अनस्टेड फ्लैट-एोंड प्लेटो ों का कायय दबाि वनम्नवलक्तखत सूि द्वारा वनधायररत
वकया जाएगा:
P = 2S (t-2) ²/D2 समीकरण (10 / 2)
जहााँ, t = एक इोंच के तीस सेकों ड में प्लेट की मोटाई
P = प्रवत िगय इोंच काम करने का दबाि पाउोंड में,324 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
D = बोल्ट् या ररिेटटस के वपच सकय ल का इोंच में व्यास जब प्लेट बाहरी फ्लेंज से जुड़ी हो या शैल का
आोंतररक व्यास जब प्लेट अोंदर के फ्लेंज से जुड़ा हो।
S = प्लेट का न्यूनतम तन्यता बल टन प्रवत िगय इोंच में
(2) वकसी भी क्तस्थवत में अनस्टेड फ्लैट-एोंड प्लेट की मोटाई 10 वममी से कम नही ोंहोनी चावहए।
(3) जहाों 63 वममी से अवधक व्यास िाले खुले स्थान के द्वारा इलेररोड या अन्य वफवटोंग के वलए एक
अनस्टेड फ्लैट-एोंड प्लेट को छेद वकया जाता है और खुले स्थान की वपच वमवलमीटर में खुले स्थान के व्यास
के चार गुना से कम नही ोंहो, िहाों प्रवतपूवतय की आिश्यकता नही ोंहोती है।
(4) जहाों एक अनस्टेड फ्लैट एोंड प्लेट में खुले स्थान का व्यास 63 वममी से अवधक है या वपच वमवलमीटर
में छेद के व्यास के चार गुना से कम हो, तो विवनयम 179 के अनुसार पूरी प्रवतपूवतय की जाएगी।
351. वसवटंग और माउंवटंग- (1) जहाों काययशील दबाि 18 वकलोग्राम/सेमी² से अवधक नही ोंहै, पेंच िाले
वसरो ोंिाले माउोंवटोंग 19 वममी तक के हैं, िहाों मानक पाइप थ्रेड का उपयोग वकया जा सकता है।
(2) वनम्नवलक्तखत पररक्तस्थवतयो ोंमें माउोंवटोंग को पेंच लगाया जा सकता है :
(क) सीधे बॉयलर शेल प्लेटटस में, नटटस को िाटरसाइड पर वफट वकया गया हो; या
(ख) स्टील के दूरस्थ भाग में (वचि 10/14 देखें ), वकसी भी क्तस्थवत में लगे हुए थ्रेड की लोंबाई माउोंवटोंग के
बोर प् लस 6 वममी से कम नही ोंहो।
वचि-10/14 माउोंवटोंग हेतु वटवपकल माइल्ड स् टील वडस् टेंस
(3) (क) दूरस्थ भाग को हल्के स्टील से ठोस बनाया जाएगा और बॉयलर के टुकड़ो ों को स् हृू वकया जाएगा
और पानी के वकनारे पर नट लगाए जाएोंगे।
(ख) दूरस्थ प्लेटो ोंकी दीिारो ोंकी मोटाई थ्रेड के तल पर 6 वममी से कम नही ोंहोगी।
(4) जहाों काक्तस्टोंग को फ्यूजन िेक्तल्डोंग द्वारा बनाया जाएगा, उनका बॉयलर में लगाने से पूिय स्टरैस-ररलीव्ड
हीट टरीटमेंट वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 325
(5) कनेरसय को शेल से िेक्तल्डोंग करके जोड़ने की विवध को इस विवनयम के वचि 10/15 से 10/19 में
दशायया गया है।
(6) (क) पैड या स्टैंडपाइप के सहारे के वबना िाटर गेज और दबाि गेज साइफन को सीधे बॉयलर शेल या
वसरो ोंसे जोड़ा जा सकता है, बशते िे स्टड द्वारा फलैंर्ज् और सुरवित हो।ों
(ख) यवद स्टड को प्लेट के माध्यम से पेंच से जोड़ा गया है, तो बॉयलर के अोंदर पूरी मोटाई के नट वफट
वकए जाएोंगे।
(7) जहाों वडजाइन का दबाि 18 वकग्रा/सेमी² से अवधक हो या माउोंवटोंग का नोमीनल बोर 19 वममी से
अवधक हो, तो माउोंवटोंग को छोटे स्टैंडपाइप या पैड द्वारा जोड़ा जाना चावहए।
(8) बॉयलर के सोंपकय में आने िाले फ्लेंजो ोंऔर पैडो ोंको उस प्लेट के करीब बनाया जाना चावहए वजससे िे
जुड़े हुए हैं।
(9) (क) (i) जहाों छोटे स्टैंडपाइप का उपयोग वकया जाता है, िहााँ फ्लेंजो ोंको जोड़ने िाले और बोक्तल्ट्ोंग िाली
सतहो ोंको मशीनीकृ त वकया जाना चावहए और प्लेट के करीब होना चावहए।
(ii) फ्लेंज के कॉक्तल्कों ग वकनारे को मशीनीकृ त वकया जाना चावहए या मशीन द्वारा फ्लेम-कट वकया जाना
चावहए।
(iii) जहाों अलग-अलग फ्लैंजेज वफट वकए गए हैं, उन्हें अध्याय 7 के वचि 7/10, 7/26, 7/27 और 7/32 में
वदखाए अनुसार जोड़ा जाएगा।
(ख) फ्यूजन िेक्तल्डोंग द्वारा वनवमयत स्टैंडपाइपो ों को बॉयलर से जोड़ने से पहले हीट टरीटमेंट द्वारा तनाि से
मुि वकया जाएगा। जहाों स्टैंडपाइप का बाहरी व्यास 127 वमलीमीटर से ज्यादा ना हो और शेल प्लेट की
मोटाई के दोगुना हो वमलीमीटर में, तो स्टैंडपाइप को अध्याय 10 के वचि 10/20 और 10/21 में वदखाए
गए तरीके से हीट टरीटमेंट से स्टरेस ररलीि वकए वबना फ्यूजन िेक्तल्डोंग द्वारा सुरवित वकया जा सकता है।
(ग) स्टैंडपाइप बोर के वलए न्यूनतम िेल्ड अटैचमेंट 127 वममी और और उससे कम है, और प्लेट की
मोटाई (T ) 1.5 Tn या उससे ज्यादा है, जैसा वचि 10/20 और 10/21 में वदखाया गया है, तो स्टैंडपाइप के
S
वलए न्यूनतम िेल्ड अटैचमेंट हेतु प्रवतपूरक प्लेटो ोंकी आिश्यकता नही ोंहोगी।
(घ) जहाों स्टैंडपाइप का बाहरी व्यास 127 वममी से ज्यादा हो और शेल प्लेट की मोटाई का दोगुनी हो, तो
स्टैंडपाइप को फ्यूजन िेक्तल्डोंग द्वारा सुरवित वकया जा सकता है जैसा वक अध्याय 10 के वचि 10/22,
10/23, 10/24 और 10/25 में वदखाया गया है और स्टैंडपाइप तथा पूरी प्लेट वजससे इसे जोड़ा गया है
उसे हीट टरीटमेंट द्वारा तनाि से मुि वकया जाएगा।
(ड़) स्टैंडपाइप को आोंतररक दबाि का सामना करने के वलए वडजाइन वकया जाएगा, लेवकन वनम् नवलक्तखत
के वलए अवतररि मोटाई की आिश्यकता हो सकती है:
(i) प्रवतपूवतय (विवनयम 179 देखें)।
(ii) बाहरी रूप से जुड़े हुए पाइप के विस्तार और सोंकु चन द्वारा स्टैंडपाइप पर लग रहा
तनाि।326 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(च) स्टैंड पाइप की मोटाई 6 वममी से कम नही ोंहोगी या जो वनम्नवलक्तखत सूिो ोंद्वारा दी गई हो, जो भी
अवधक हो:
(i) 250 lb./sq.in. तक और 250 lb./sq.in. सवहत काययशील दबाि के वलए, t=D+4
(ii) 250 lb./sq.in. से ऊपर काययशील दबाि के वलए, t = 1.4 D + 6
जहाों,
t = एक इोंच के तीस सेकों ड में स्टैंडपाइप की मोटाई,
D = स्टैंडपाइप का बाहरी व्यास इोंच में।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 327328 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)][भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 329
352. हाईडरॉवलक परीिण- हाईडरॉवलक परीिण विवनयम, 298 के उप-विवनयम (1) का अनुपालन
करेगा।
भाग-4
सीमलेस शेल बॉयलर
353. अवधकतम स्वीकायष कायाषत्मक दबाि का वनधाषरण – (1) अवधकतम वीकीकायय कायायत्मक दबाि
का वनधायरण विवनयम 346 के अनुसार वनधायररत वकया जाएगा वसिाय उनके जहाों, शेल की न्यूनतम मोटाई
वनम्नवलक्तखत तावलका में उक्तिक्तखत के अनुसार होगी:-
तावलका 10/2
हृम सों. आोंतररक व्यास वम.मी. नयूनतम मोटाई वम.मी
में में
(1) (2) (3)
1. 610 तक और 610 6.3
सवहत
2. 610 से अवधक, 914 8
तक और 914 सवहत
3. 914 से अवधक 10
(2) वकसी भी क्तस्थवत में बेलनाकार शेल और एोंड शेल की सुरिा का कारक 4 से कम नही ोंहोना चावहए।
(3) समीकरण में ‚ ‛ का मान 35 के रूप में वलया जाएगा।
(4) जहाों वसरो ों को शेल के साथ िेल्डेड वकया जाता है या याोंविक रुप से सुरवित और िेल्डेड हो, वजससे िे
तनाि मुि होगों े।
354. एंड प्लेट- (1) एोंड प्लेटें विवनयम 174,176 और 177 या 350 के अनुरूप होगों ी, जैसा भी मामला हो
जो वक इस बात पर वनभयर है वक िे वडश्ड हैं या फ्लैट हैं।
(2) जब एोंड प्लेटो ोंको याोंविक रुप से सुरवित वकया जाता है और सीमलेस शेल को अध्याय 10 के वचि सों.
10/4 और 10/5 में वदखाए गए तरीके से िेल्डेड वकया जाता है और िेल्ड तनाि मुि होता है, तो विवनयम
337 में बॉयलर श्रेणी-II के सोंबोंध में वनवदयष्ट स दबाि और अन्य सीमाएों लागू नही ोंहोगों ी।330 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
355. मेनहोल्स और शैल्स में अन्य खुले थ ान -ये विवनयम, 179 का अनुपालन करेंगी।
356. माउंवटंग, वफवटंग और कनेक्शन – (1) सभी प्रकार के इलेररॉड बॉयलर के वलए माउोंवटोंग,
वफवटोंग और कनेक्शन विवनयम, 181 का अनुपालन करेंगे।
(2) इलेररॉड बॉयलर के मामले में, ट्यूबलर ग्लास टाइप िाटर लेिल गेज के जल स्तर को दशायने िाला एक
माध्यम होना चावहए और बॉयलर को फीवडोंग के वलए एक माध्यम पयायप्त होगा और सेफ्टी िाल्व क्तरोंग
लोडेड टाइप के होने चावहए।
(3) यवद एक इलेररॉड बॉयलर को चुम्बकीय िॉल्व के साथ वफट वकया जाता है, तो उि िॉल्व को दूसरे
सुरिा िॉल्व के स्थान पर वीकीकार वकया जाएगा, बशते वक िॉल्व और बॉयलर दोनो ोंकी वबजली की आपूवतय
का स्रोत समान हो और दोनो ोंएक वसग्नल क्तवीकच द्वारा सोंचावलत हो।ों[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 331
अध्याय-11
इकोनोमाइजसष, फीड पाइप्स, फीड हीटसष और अन्य समान िैसल के वडजाइन और वनमाषण के
वलए मानक शतें
भाग-1
इकोनोमाइजसष
357. मानक शतों और उनके अपिादो ंका लागू वकया जाना - (1) इकोनोमाइजसय को अवधवनयम
की धारा 12 की उप-धारा (5) के तहत पोंजीकृ त नही ोंवकया जाएगा और इकोनोमाइजसय के सोंदभय में उस
धारा की उप-धारा (6) के तहत प्रमाण पि जारी नही ोंवकया जाएगा जब तक वक सामग्री वडजाइन और
वनमायण, के सोंबोंध में मानक शतें जो इस अध्याय में वनवदयष्ट स है, ऐसे इकोनोमाइजसय के सोंबोंध में पूरी न की गई
हो।ों
(2) उप-विवनयम (1) में कु छ भी वनवहत होने के बािजूद, मुख्य वनरीिक विवनयम 359 के प्रािधानो ोंके
तहत, इकोनोमाइजसय पोंजीकृ त कर सकता है और इसके उपयोग को अवधकृ त करने िाले प्रमाणपि को
जारी करने का आदेश दे सकता है, चाहे ऐसे इकोनोमाइजसय के सबोंध में मानक शतें पूणय रूप से पूरी नही ों
की गई हैं।
358. सामान्य आिश्यकताएं- (1) सभी कास्ट आयरन और स्टील हेडर और इकोनोमाइजसय की
असेंबली में प्रयोग वकए जाने िाले भाग, सामग्री विवनदेश और परीिण कारीगरी और सोंरचनात्मक
आिश्यकताओ ोंके सोंबोंध में इस अध्याय की आिश्यकताओ ोंके अनुरूप होगों े।
(2) सभी इकोनोमाइजसय वनरीिण प्रावधकारी की देख-रेख में बनाए जाएोंगे और उस प्रावधकारी द्वारा
इसे प्रमावणत वकया जाएगा।
(3) फॉमय XV में वनरीिण प्रावधकारी से प्रमाण-पि जो यह प्रमावणत करता है वक सामग्री का परीिण
वकया गया है और इकोनोमाइजर उनकी देख-रेख में बनाए गए थे, को पोंजीकरण के वलए
आिेदन के साथ या उससे पहले मुख्य वनरीिक को प्रस्तुत वकया जाएगा।
(4) पोंजीकरण के वलए आिेदन के पहले या आिेदन के साथ वनम्नाोंवकत प्रस्तुत करना चावहए :-
(क) विवनमायता या वनमायता के वजम्मेदार प्रवतवनवध द्वारा हस्तािररत फामय XVI में विवनमायण और
परीिण का प्रमाण-पि, वजसमें इकोनोमाइजसय का वििरण इसके वनमायण में प्रयुि सामग्री332 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
का वििरण और कई भागो ोंके आयाम शावमल हैं साथ ही यह घो णा वक तन्यता िेंवकों ग
स्टरेंथ की सीमाएों और परीिण मानक शतों को पूरा करती हैं।
(ख) सामग्री वनमायता से तन्यता िेंवकों ग स्टरेंथ और एलाोंगेशन का उिेख करते हुए एक
प्रमाणपि प्रदान वकया गया हो, वक यवद वनमायता और विवनमायता एक ही हैं, तो उपरोि
जानकारी प्रस्तुत करने िाले विवनमायता के सटीक वििरण वीकीकार वकए जाएोंगे।
(5) जहाों सोंभि हो वीकामी की सुविधा के अनुरूप, यह वसफाररश की जाती है वक इकोनोमाइजसय को दो
या अवधक खोंडो में स्थावपत वकया जाए।
359. सूत्र का संशोधन- जहाों कोई प्रमाण-पि प्रस्तुत नही ोंवकया जाता, िहाों अवधकतम वीकीकायय
कायायत्मक दबाि जैसा वक सूि में है, से 10% कम कर वदया जाएगा। हालाोंवक जब कायय कौशल वकसी भी
तरह से सोंवदग्ध है, और मुख्य वनरीिक सोंतुष्ट स नही ोंहै वक पूियगामी शतों में से कोई भी शतय सोंतुवष्ट स के वलए
पयायप्त है, तो िह अपने वििेक से अवधकतम वीकीकायय कायायत्मक दबाि का उस प्रवतशत तक कम कर
सकता है जैसा िह उवचत समझता है।
360. इस्पात इकनॉमाइजसष के वलए वनमाषता का प्रमाण-पत्र - वनमायता सिम व्यक्ति को वनम्नवलक्तखत
रूप में प्रमाण-पि प्रस्तुत करेगा:-
हम एततद्वारा प्रमावणत करते हें वक नीचे िवणयत सामग्री ओपेनहथय या इलेक्तररक प्रवहृया िारीय/ अम्रीय
द्वारा बनाई गई है और मानक परीिणो ोंके अनुसार सिम व्यक्ति की उपक्तस्थवत में सोंतो जनक ढोंग से
परीिण वकया गया है।
361. नए इकनॉमाइजसष के वलए हाईडरॉवलक परीिण – (1) सभी नए इकनॉमाइजसय के वलए
हाईडरॉवलक परीिण लागू वकया जाएगा, जैसा वक नीचे तावलका 11/1 में वदखाया गया है:-
तावलका 11/1
हृ.सं. असेंबली से पहले घटको ंपर अवधकतम वीकीकायय हाईडरोवलक परीिण
कायायत्मक दबाि दबाि
वक.ग्रा./ सेमी2
वक.ग्रा./ सेमी2 (जी) में
(जी) में
(1) (2) (3) (4)
1 कास्ट, आयरन ट्यूब, हेडर और बेंड अवधकतम वीकीकायय कायायत्मक दबाि का दोगुना।
न्यूनतम दबाि 49[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 333
2 इस्पात ट्यूब और बेंड 35 या उससे कम 70
3 इस्पात ट्यूब और बेंड 35 से ऊपर लेवकन 70 अवधकतम वीकीकायय
से अवधक नही ों कायायत्मक दबाि का
दोगुना।
4 इस्पात ट्यूब और बेंड 70 से ऊपर 70 से ऊपर अवधकतम
वीकीकायय कायायत्मक
दबाि
5 हेडर 70 से नीचे अवधकतम वीकीकायय
कायायत्मक दबाि का
दोगुना।
6 हेडर 70 से ऊपर 70 वक.ग्रा/ सेमी2
अवधकतम
(जी) वीकीकायय
कायायत्मक दबाि
(2) सभी एसेम्बल्ड खोंडो ोंके वलए, हाईडरॉवलक परीिण दबाि अवधकतम वीकीकायय कायायत्मक दबाि से 1.5
गुना से कम नही ोंहोना चावहए।
(3) अवधकतम वीकीकायय कायायत्मक दबाि िह उच्च दबाि होगा वजस पर इकोनोमाइजर ररलीफ िॉल्व सेट
वकए जाने हैं।
(4) उपरोि परीिण दबाि कम से कम दस वमनट की अिवध तक रखा जाएगा।
362. कायषकौशल और विवनमाषण- प्रेशर पाटय के वनमायण में प्रयोग की गई सभी सामग्री का परीिण
वकया जाना चावहए और सामग्री वनम्नाोंवकत आिश्यकताओ ोंके अनुरूप होगी:-
(i) कायय कौशल पूणयतया उच्चतम मानक का होना चावहए। सभी काक्तस्टोंग अच्छी तरह से पूणय होनी
चावहए, िे वकसी भी कमी, वछद्रयुि स्थान और ब्लो होि से मुि होगों े और वबना अशुद्ता के आयामो ोंके
अनुसार सही होना चावहए। जहाों चापलेट का उपयोग वकया जाता है, िहाों धातु के साथ सोंतो जनक फ्यूजन
होना चावहए और चापलेट सीसे मुि धातु से अच्छी तरह वटन वकया जाना चावहए।
(ii) सभी बोल्ट् के पेंच थ्रेड विटिथय फामय में होने चावहए।334 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iii) जहाों आिश्यक हो, सभी घटक भागो ोंका वनमायण गेज को सीवमत करने के वलए वकया जाएगा तावक
पूरे में अदला-बदली सुवनवश्चत की जा सके ।
भाग -2
कच्चा लोहा, ट्यूब और हेडर
363. वनमाषण की प्रवहृया- (1) (क) काक्तस्टोंग लौह अयस्क गलाने िाली फनेस के अलािा वकसी भी
उपयुि धातुकमय सोंयोंि में वपघला हुआ या पररष्कृ त धातु से कास्ट की जाएगी।
(ख) 30 वम.मी व्यास िाले टेस्ट बार पर आिश्यक न्यूनतम परीिण पररणाम वनम्न तावलका 11/2 के
अनुसार होगों े:-
तावलका 11/2
हृम ट्यूबो ोंके वलए सामग्री और अन्य प्रेशर वक.ग्रा./ वम.मी2 में 45.8 सें.मी की अिवध पर
सों. पाटय न्यूनतम िहन िमता अनुप्रस्थ परीिण
(1) (2) (3) (4) (5)
1. वक.ग्रा. में न्यूनतम
न्यूनतम वडफ्लेक्शन
अनुप्रस्थ िेवकों ग सें.मी. में.
लोड
2. ग्रेड 16.5 23.2 1,052 0.434
3. ग्रेड 14 लोहा 19.7 934 0.407
4. ग्रेड 12 लोहा 16.9 839 0.382
नोट: ग्रेड 16.5, 14 और 12 लोहा हृमश: 23.2, 19.7 और 19.9 वक.ग्रा/ वम.मी2 न्यूनतम तन्यता िमता के
अनुरूप है।
(2) विश्ले ण के अनुसार, सल्फर और फास्फोरस सामग्री वनम्नवलक्तखत तावलका 11/3 में वदए गए प्रवतशत से
अवधक नही ोंहोनी चावहए:-[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 335
तावलका 11/3
हृम सों. घटक अवधकतम सल्फर प्रवतशत अवधकतम फास्फोरस %
(1) (2) (3) (4)
1. ट्यूब 0.15 1.00
2. हेडर 0.15 1.00
(3) (क) न्यूनतम मैंगनीज सामग्री वनम्नवलक्तखत फॉमूयले द्वारा सल्फर सामग्री से सोंबोंवधत होगी-
(%सल्फर x1.7) + 0.3 = % मैंगनीज
(ख) यह वनयवमत गुणित्ता वनयोंिण प्रयोगशाला विश्ले ण द्वारा सोंतुष्ट स होने चावहए और वकसी भी क्तस्थवत में,
मैंगनीज 0.5 प्रवतशत से कम नही ोंहोना चावहए और 0.50-0.90 प्रवतशत के दायरे में होना चावहए।
(ग) फॉस्फोरस सामग्री को वकफायती रूप से वजतना सोंभि हो कम रखना चावहए, लेवकन वकसी भी क्तस्थवत
में 1.0 प्रवतशत से अवधक नही ोंहोगी।
364. टेट बासष- (1)(क) जब टेस्ट बार अलग-अलग कास्ट वकये जाते हैं, तो उन्हें उसी समय और धातु
के उसी लैडल से डाला जाना चावहये वजस काक्तस्टोंग का िे प्रवतवनवधत्व करते हैं।
(ख) विवनयम, 365 में विवनवदयष्ट स टेस्ट बारो ोंकी सोंख्या प्रत्येक मेल्ट् की सभी काक्तस्टोंग पर लागू होगी।
(2) जब काक्तस्टोंग के वलए बार साोंचो ोंमें ढाले जाते हैं और परीिण भाग साोंचे में ढालकर इस तरह से
जोड़े जाते हैं वक तरल धातु एक ही प्रवहृया में दोनो ोंसाोंचो ोंको भर देती है।
(3) सभी परीिण बार को उसी तरह के सैंड मोल्ड में कास्ट वकया जाएगा, जैसे हरी रेत, या दोमट या
सूखी रेत, जैसा वक िे वजस काक्तस्टोंग का िे प्रवतवनवधत्व करते हैं उसमें उपयोग होता है।
(4) मोल्ड से हटाने के बाद टेस्ट बार को कोई भी हीट टरीटमेंट नही ोंवकया जाएगा वसिाय उन मामलो ों
के जहाों काक्तस्टोंग का हीट टरीटमेंट हुआ है।
365. तन्यता परीिणो ंकी संख्या- (1) काक्तस्टोंग के प्रत्येक बैच के वलए आिश्यक परीिणो ोंकी
सोंख्या वनम्नाोंवकत तावलका 11/4 के अनुसार होगी, जहाों काक्तस्टोंग को चार िगों में विभावजत वकया गया है
और आिश्यक परीिण का उिेख वकया गया है-336 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 11/4
हृम सों. िगय काक्तस्टोंग का भार परीिण आिश्यकताएों
(1) (2) (3) (4)
1. 1 13 वक.ग्रा तक प्रत्येक 1524 वकग्रा. काक्तस्टोंग या उसके भाग
के वलए एक परीिण
2. 2 13 वक.ग्रा से प्रत्येक 2000 वकग्रा. काक्तस्टोंग या उसके भाग
अवधक और 50 के वलए एक परीिण
वक.ग्रा तक
3. 3 50 वक.ग्रा. से प्रत्येक 3000 वकग्रा. काक्तस्टोंग या उसके भाग
अवधक और 1000 के वलए एक परीिण
वक.ग्रा तक
4. िगय 1,2 और 3 में एक परीिण द्वारा प्रस्तुत सभी काक्तस्टोंग को उसी ताप के एक ही लैडल
में डाला जाना चावहये जैसा वक परीिण के वलए बार या बासय को प्रदान की गई है।
5. 4 1000 वक.ग्रा से प्रत्येक 4000 वकग्रा. काक्तस्टोंग या उसके भाग
अवधक और के वलए या 4000 वकग्रा. या अवधक िजन
महत्वपूणय काक्तस्टोंग िाले प्रत्येक काक्तस्टोंग के वलए एक परीिण
(2) वीकीकृ त और अवीकीकृ त करने की शतें वनम्नानुसार हैं:
तावलका 11/5
हृम सों. परीिण पररणाम वनष्क य
(1) (2) (3) (4)
1. प्रथम सफल बैच या प्रस्तुत अलग काक्तस्टोंग को
वीकीकार वकया जाएगा
2. तन्यता या अनुप्रस्थ दो और परीिण वकए जाएोंगे
परीिण असफल[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 337
3. वद्वतीय यवद दोनो ोंसफल होती बैंच या अलग काक्तस्टोंग का
है प्रस्तुतीकरण वीकीकार वकया जाएगा
4. यवद कोई एक विफल बैंच या अलग काक्तस्टोंग का
रहता है प्रस्तुतीकरण अवीकीकार वकया
जाएगा
बशते, स्पष्ट स काक्तस्टोंग दो दशायने िाले वकसी भी परीिण सामग्री की विफलता के मामले में, एक और
परीिण सामग्री अवतररि परीिण बार से ली जाएगी या उसी बैच की काक्तस्टोंग से काट ली जाएगी और
इससे प्राप्त पररणामो ोंको दो पूणय परीिण बार से प्राप्त पररणामो ोंसे प्रवतस्थावपत वकया जाएगा।
366. मानक परीिण सामग्री- (1) तन्यता िमता परीिण बार वनम्नवलक्तखत वचि 11/1 में दशायए गए
आयामो ोंके अनुरूप होगा और बासय का परीिण या तो सादे या पेंचदार वसरो ोंके साथ वकया जा सकता है।
वचत्र 11/1
तावलका 11/6
B D A P R C E F L L
p s
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
वममी. वममी. वममी. वममी. वममी. वममी. वममी. वममी. वममी. वममी.
30
29SF
29 SW
20 51 51
13 89 29 210 149
(2) परीिण बासय को कॉलम-(1) में वदए गए व्यास के बेलनाकार बासय के रूप में कास्ट वकया जाएगा और
उपरोि तावलका में कॉलम (2) और (4) में वदए गए आयामो ोंके वलए मशीनीकृ त वकया जाएगा।338 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
भाग-3
काट आयरन इकोनोमाइजसष की वनमाषण आिश्यकताएं
367. वडजाइन आिश्यकताएं- वनमायता, वडजाइन वििरण के आधार पर वनम्नवलक्तखत अवधकतम वीकीकायय
कायायत्मक दबाि के अधीन कॉस्ट आयरन इकोनॉमाइजसय के सभी भागो ोंके वडजाइन के और मजबूती के
सोंबोंध में वनरीिण प्रावधकारी को सोंतुष्ट स करेगा:
तावलका 11/7
हृम सों. प्रकार वक.ग्रा/ सें.मी2 (जी) में अवधकतम
वीकीकायय कायायत्मक दबाि
(1) (2) (3)
1. साधारण लोंबितट ट्यूब 22.8
2. मजबूत ट्यूबो ोंके साथ साधारण 26.3
लोंबित ट्यूब
3. ररोंग स्टे लोंबितट ट्यूब 33.3
4. वगल्ड ट्यूब प्रकार का अनुमोवदत 45.7
वडजाइन
368. काट ऑयरन इकनॉमाइजसष के वलए संयुि बोल्ट और टड – (1) बोल्ट् और स्टड के वलए
अवधकतम वीकीकायय कायायत्मक दबाि की गणना विवनयम 375 के अनुसार की जाएगी।
(2) कास्ट ऑयरन में टैप वकए गए स्टड के उपयोग की अनुमवत है जहाों
(क) स्टड और नट फ्लू गैसो ोंके मागय में न हो
(ख) स्टड को गेज के वहसाब से सािधानी से पेंचदार बनाया गया हो और पयायप्त गहराई के टैप
वकए गए वछद्रो ोंमें वफट वकया गया हो।
(3) 16.5 ग्रेड के लोहे से बने वगल्ड ट्यूब प्रकार के अनुमोवदत वडजाइन के इकोनोमाइजर के वलए
अवधकतम वीकीकायय कायायत्मक दबाि की सीमा को 52.7 वक.ग्रा/ सें.मी. (जी) तक बााया जा सकता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 339
369. इकोनोमाइजर जल वनकास का तापमान- वडजाइन की क्तस्थवत ऐसी होगी वक इकोनोमाइजर का
अवधकतम वनगयम जल का तापमान, बॉयलर डरम में सोंतृप्त भाप तापमान से कम से कम 22० से॰ नीचे हो।
बशते वक यह आिश्यकता उन इकोनोमाइजर पर लागू नही ोंहोती जो कम दबाि िाले जल ताप प्रवहृया पर
काम कर रहे हैं, जो पानी के 36.5 मी से कम दबाि पर काम कर रहे हैं।
भाग -4
ट्यूबो ंपर काट ऑयरन स्लीव्ज के साथ या उनके वबना टील इकोनोमाइजर हेतु वनमाषण
आिश्यकताएं
370. ट्यूब वनमाषण (1) ट्यूब विवनयम122 के अनुसार वनवमयत की जानी चावहये।
(2) बेंवडोंग तनािो ोंको दूर करने के वलए िैवतज ट्यूबो ोंकी लोंबाई में एक या अवधक अोंतराल पर
सपोटय देने के वलए उपयुि प्रािधान वकया जाएगा और इन सपोटटयस के साथ-साथ वसरो ोंके
कनेक्शनो ोंको मुि विस्तार की अनुमवत दी जानी चावहये।
371. ट्यूब के अवधकतम स्वीकायष कायाषत्मक दबाि- ट्यूबो ोंके अवधकतम वीकीकायय कायायत्मक दबाि
की गणना विवनयम 244 के उप विवनयम (1) के अनुसार की जाएगी, लेवकन काययशील धातु तापमान को
जल के अवधकतम तापमान के रूप में वलया जाएगा वजसके वलए अियि के वहस्से वडजाइन वकये गए हैं
प्लस 11० सें॰।
372. हेडर का वनमाषण- (1) हेडर का वनमायण, विवनयम 125 के अनुसार वकया जाना चावहये।
(2) भागो ोंको वनम्नवलक्तखत विवधयो ोंमें से वकसी एक विवध द्वारा सुरवित वकया जाएगा, नामत:-
(क) विस्ताररत, बेलेड और िेल्डेड
(ख) अवतररि सुरवित साधन के साथ मजबूत िेल्डेड।
(ग) पूणय गहराई युि मजबूत िेल्ड
(घ) 51 वम.मी. बोर से कम के वहस्सो ोंको पेंच और सील िेल्ड वकया जा सकता है।
(3) फार्ज्य सीमलेस स्टील ट्यूब हेडर के खुले वसरो ोंको फोवजिंग द्वारा बोंद वकया जा सकता है, या वसरो ों
को बोक्तल्ट्ोंग, स्क्रू इोंग या िेक्तल्डोंग द्वारा अनुमोवदत तरीके से सुरवित वकया जा सकता है।340 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
373 हेडर का अवधकतम स्वीकायष कायाषत्मक दबाि- (1) आयताकार हेडर के अवधकतम वीकीकायय
कायायत्मक दबाि की गणना विवनयम 246 के अनुसार की जाएगी।
(2) बेलनाकार हेडर का अवधकतम वीकीकायय कायायत्मक दबाि की गणना विवनयम 169 और 170 के
अनुसार की जाएगी।
374. हेडर से ट्यूबो ंको जोडना- (1) ट्यूबो ोंको वनम्नवलक्तखत तरीको ोंमें से एक के द्वारा ट्यूब प्लेट से
जोड़ा जाएगा, अथायतट -
(क) बेल माउवटोंग या सील िेक्तल्डोंग के साथ विस्तार
(ख) मजबूत िेक्तल्डोंग
(ग) याोंविक बोक्तल्ट्ड जोड़
(2) रोलर विस्ताररत ट्यूब कम-से-कम 6 वम.मी. के होल द्वारा नेक या बेयररोंग िाले वहस्से के माध्यम से
बाहर वनकला होना चावहए और प्रत्येक 25 वम.मी व्यास प्लस 1.6 वम.मी. के वलए 0.8 वम.मी की सीमा तक
बेल माउथ द्वारा खीचों कर तैयार वकया जाएगा।
(3) (क) हेडर में विस्ताररत ट्यूबो ोंको हेडर के अोंदर या बाहर सील िेल्डेड वकया जा सकता है।
(ख) जहाों हेडर के अोंदर एक सील िेल्ड लगाया जाता है, ट्यूब एण्ड प्रोजेक्शन और बेल माउथ जो उप
विवनयम (2) में वनवदयष्ट स है, की आिश्यकता नही ोंहोती है।
(4) रोलर विस्ताररत ट्यूब के मामले में, हेडर में ट्यूब होल इस प्रकार बने होने चावहए वक ट्यूबो ोंको प्रभािी
ढोंग से कसा जा सके , कम-से-कम 13 वम.मी. की समानाोंतर सीवटोंग की नेक या बेल्ट् होनी चावहये।
(5) जहाों ट्यूबो ोंको हेडर से सीधे िेल्डेड वकया जाता है िहाों वजस तकनीक का इस्तेमाल होता है िह
वनरीिण प्रावधकारी द्वारा अनुमोवदत होगी और सभी िेल्ड का उपयुि रूप से हीट टरीटमेंट वकया जाएगा।
(6) बोल्ड िाले जोड़ो ोंको विवनयम 375 के अनुसार वडजाइन वकया जाएगा।
(7) क्तक्लप और लग्स को स्पोटय देने िाले ट्यूब स्पेससय को ट्यूबो ोंमें िेल्ड वकया वकया जा सकता है।
(8) ट्यूबो ोंको इस प्रकार व्यिक्तस्थत वकया जाएगा वक उनकी आोंतररक और बाह्य सफाई सुलभ हो।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 341
भाग-5
375. बोल्ट और टड स जोड और फ्लैंजेस - (1) बोल् ट के वलए अवधकतम वीकीकायय कायायत्मक
दबाि वनम्नवलक्तखत सूि द्वारा वनवश्चत वकया जाएगा।
P 2
समीकरण (11/1)
जहाों,
N= तैयार वहस्से में बोल्ट् की सोंख्या
N= प्रवत इोंच स्क्रू थ्रेड की सोंख्या
D= थ्रेड पर मापा गया बोल्ट् व्यास इोंच में
A= दबाि के सोंपकय में आने िाला िेि वजसे बोल्ट् की वपच लाइन और फ्लैंज के अोंदरूनी वकनारे के
बीच में एक लाइन से वघरा माना जाता है, जहाों फ्लैट जोड़ो ोंका उपयोग जोड़ो के छिो ोंके साथ वकया जाता
है। जहाों शिाकार जोड़ो के फे स का उपयोग सोंयुि ररोंगो ोंके साथ, घुमािदार हृॉस-सेक्शन के वकया जाता
है, िहाों दबाि के सोंपकय में आने िाले िेि को थ्रेड की रूट तक विस्ताररत माना जाएगा जहाों ट्यूब के वसरो ों
को स्क्रू वकया गया है, या इसी सीमा तक यवद फ्लैग्स द्वारा अन्य साधन जुड़े होते हैं।
C= 4,700, 28 टन प्रवत िगय इोंच न्यूनतम अोंवतम तन्यता तनाि के स्टील बोल्ट् या स्टड के वलए, जहाों
थ्रेड पर व्यास ¾ इोंच से कम है।
C= 5,100, 30 टन पवत िगय इोंच न्यूनतम अोंवतम तन्यता तनाि के स्टील बोल्ट् या स्टड के वलए, जहाों
थ्रेड पर व्यास ¾ इोंच से कम है।
C= 5,600, 35 टन प्रवत िगय इोंच न्यूनतम अोंवतम तन्यता तनाि के स्टील बोल्ट् या स्टड के वलए, जहाों
थ्रेड पर व्यास ¾ इोंच से कम है।
C= 5,600, 28 टन प्रवत िगय इोंच न्यूनतम अोंवतम तन्यता तनाि के स्टील बोल् ट या स्टड के वलए, जहाों
थ्रेड पर व्यास ¾ इोंच से कम नही ोंहै और 7/8 इोंच से ज्यादा नही ोंहै।342 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
C= 7,000, 28 टन प्रवत िगय इोंच न्यूनतम अोंवतम तन्यता तनाि के स्टील बोल्ट् या स्टड के वलए, जहाों
थ्रेड पर व्यास 7/8 इोंच से ज्यादा है।
जहाों इस्तेमाल वकए गए बोल् ट या स्टड में 32 टन िगय इोंच से अवधक िहन िमता होती है, बोल् ट या स्टड का
प्रवतस्थापना आिश्यक होने पर इस तथ्य पर ध्यान आकव यत करने के वलए एक प्लेट को इकोनोमाइजर
सोंरचना में स्थायी रूप से विशे क्तस्थवत में वफक्स की जानी चावहए। वकसी भी क्तस्थवत में, नटो ोंको फ्लू गैसो ों
के सोंपकय में नही ोंआना चावहए।
(2) प्रत्येक फ्लैंज की मोटाई वनम्नवलक्तखत समीकरण मे दी गई मोटाई से ज्यादा नही ोंहोनी चावहये।
[ ( )]
√ समीकरण (11/2)
जहाों
t= फ्लैंजो ोंकी मोटाई एक इोंच के 30 सेके ण्ड में
P= अवधकतम वीकीकायय कायायत्मक दबाि, पाउोंड प्रवत िगय इोंच (गेज) में
D= ट्यूब का बाहरी व्यास इोंच में
D = वपच िृत्त का व्यास अथिा बोल्ट् या स्टड इोंच में
1
बशते वक ऐसा फ्लैंज बॉडी के साथ उपयुि रूप से और इोंटरनल कॉनयर विज्या से अवभन्न रूप में कास्ट
वकया गया हो।
हालाोंवक वकसी भी मामले में फ्लैंज की मोटाई एक इोंच के तीस सेके ण्ड के 24 से कम होनी चावहए।
भाग-6
376. िाल्व और माउंवटंग - (1) सभी इकोनोमाइजर थमोमीटर के साथ उपलब्ध होने चावहये तावक
इनलेट और आउटलेट कनेक्शनो ोंके पास जल का तापमान मापा जा सके ।
(2)(क) िह िाल्व जो एक पूिय वनधायररत सीमा से अवधक दबाि में िृक्तद् को रोकता है, प्रत्येक इकोनोमाइजर में वफट
वकया जाएगा और इसका वडजाइन लोवडोंग के साथ अिाोंछनीय बाधा को रोकने का प्रािधान करेगा। कास्ट
ऑयरन के दबाि भागो ोंिाले इकोनोमाइजर और पररचावलत पाइवपोंग से जुड़े स्तरो ोंके समूह में व्यिक्तस्थत[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 343
प्रत्येक समूह या स्तर पर एक ररलीफ िाल्व लगाया जाएगा। ररलीफ िाल्व का वछद्र कम-से-कम 19 वम.मी.
व्यास का होना चावहए।
(ख) ररलीफ िाल्व िमता की गणना इकोनोमाइजर के तापीय िमता के आधार पर की जाएगी।
(3) इकोनोमाइजर में दबाि को इोंवगत करने के वलए दबाि गेज का वनमायण विवनयम 232 के अनुसार
वकया जाएगा।
(4) िायु छोड़ने िाले िाल्वो ोंको उन सभी वबयदुओ ों पर हिा छोड़ने के वलए लगाया जाना चावहए जहाों
िायु सोंचय हो सकता है।
(5) ब्लो ऑफ डरेन िाल्व को इकोनोमाइजर का जल पूरी तरह से वनकालने के वलए लगाया जाएगा।
(6) इकोनोमाइजर, वजसमें इनकवमोंग फीड को इकोनोमाइजर आउटलेट से गमय पानी के साथ
वमलाकर गमय करने का प्रािधान है, उसमें गमय पानी की ररटनय लाइन मे एक नॉन – ररटनय िाल्व होगा।
(7) प्रत्येक मामले में, जब बॉयलर को इकोनोमाइजर के माध्यम से कोई पानी नही ोंवदया जा रहा हो, तो
फ्लू गैसो ोंको प्रिावहत करके एक ररजिय फ्लू का प्रािधान वकया जाएगा जहाों यह बॉयलर से जुड़ा हुआ नही ों
है।
(8) आोंतररक विस्फोट के कारण जमा अत्यावधक दबाि सोंचय से इकोनोमाइजर को मुि करने के
वलए, अवधकाोंशत: िैवतज रूप से वटके हुए ‚सेल्फ सीवलोंग‛ प्रकार के डोर वफट वकए जाएोंगे।
(9) सभी िाल्व और माउवटोंग सोंतो जनक रूप से उसी दबाि के हाईडरॉवलक परीिण का सामना
करेंगे जो इकोनोमाइजर के पोंजीकरण के दौरान उन पर लागू वकया गया होगा।
(10) इकोनोमाइजर के माध्यम के अलािा बॉयलर फीवडोंग के िैकक्तिक साधन का प्रािधान वकया
जाएगा।
(11) बॉयलर से इकोनोमाइजर में भाप या जल के वनियहन को रोकने के वलए बॉयलर और
इकोनोमाइजर के बीच हॉट फीड लाइन में एक नॉन-ररटनय िाल्व का प्रािधान वकया जाएगा।
भाग-7
फीड पाइप्स
377. फीड पाइवपंग के वलए अवधकतम स्वीकायष कायाषत्मक दबाि- अवधकतम वीकीकायय कायायत्मक
दबाि सामान्य काययशील पररक्तस्थवतयो ोंमें फीड पाइवपोंग में घ यण और अन्य नुकसानो ोंपर काबू पाने में
उत्पन्न अवधकतम दबाि या बॉयलर फीड पोंप द्वारा उत्पन्न अवधकतम दबाि होगा, जब तक उस दबाि को
पाइप लाइन में फै लने से रोकने के वलए विशे प्रािधान नही ोंवकया जाता।344 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
नोट: 100 वक.ग्रा./ िगय सें.मी. (जी) और उससे अवधक वडजाइन प्रेशर पर सोंचावलत बॉयलरो ोंके वलए वबना
इकोनोमाइजर इनलेट आइसोलेवटोंग िाल्व के फीड जल वसस्टम के वलए फीड जल वनकास पाइप को
मैके वनकल ररलीफ वडिाइस के प्रािधान के साथ बॉयलर वडजाइन प्रेशर के आधार पर वडजाइन वकया जा
सकता है या एचपी हीटर के उपमागय के वलए थ्री-िे िाल्व, बॉयलर फीड पोंप (बीएफपी) शट-ऑफ दबाि
को पाइवपोंग वसस्टस से सोंचाररत होने से रोकने के वलए और इस तरह के फीड िॉटर वसस्टम के साथ,
बॉयलर को फीड िॉटर लाइन में अोंवतम आईसोलेशन िाल्व तक हाइडरो परीिण वकया जाएगा।
378. टील फीड पाइप- स्टील फीड पाइप अध्याय -7 के अनुसार होगों े।
379. फीड हीटर और फीड पाइप के साथ वफट इसी तरह के िैसल - (1)(क) यवद वनमायण िेल्डेड हो
तो ऐसे िैसल अध्याय-12 की आिश्यकताओ ों के अनुरूप होगों े बशते वक िेल्ड के रेवडयोग्रवफक परीिण से
17.5 वक.ग्रा./ िगय से.मी. (जी) तक के दबाि को छू ट दी जा सकती है।
(ख) वमवश्रत वनमायण के िैसल के कु छ वहस्सो ोंके वलए, उपरोि अध्यायो ोंके उपयुि विवनयमो ोंकी
आिश्यकताओ ोंका पालन वकया जाएगा जो प्रत्येक ऐसे वहस्से पर लागू हो सकता है।
(2) सभी भागो ोंका अवधकतम वीकीकायय काययशील दबाि इन विवनयमो ोंमें वदए गए उपयुि सूिो ोंद्वारा
वनधायररत वकया जाएगा और तनािो ोंकी गणना करते समय वनम्नवलक्तखत अवतररि वबयदुओ ोंपर उवचत ध्यान
वदया जाएगा, अथायतट-
िैसल और इसकी सामग्री के अपने भार, वकसी भी सुपर इम्पोस्ड िैसल या दूसरे उपकरण, पाइप और
िैसल से जुड़े दूसरे ऐसे ही भाग, इनसुलेशन और स्टैवटक हैड के कारण होने िाला तनाि, यवद कोई है।
(3) आोंतररक फ्ल्ल्ोर के मामले में अवधक प्रेशर को रोकने के वलए पयायप्त िमता के ररलीविोंग वडिाइस
के साथ प्रत्येक ऐसी िैसल को सुरवित वकया जाएगा।
(4) वनमायण, स्टामवपोंग और टेक्तस्टोंग के दौरान वनरीिण, अध्याय-1 के उवचत विवनयम का अनुपालन
वकया जाएगा।
भाग- 8
फीड पाइप और इकोनोमाइजर का पंजीकरण और वनरीिण
380. वनरीिण की तैयारी- (1)(क) प्रत्येक वनरीिण पर, इकोनोमाइजर खाली और पूरी तरह
आोंतररक और बाहरी रूप से साफ होना चावहए और वचमनी भी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 345
(ख) पूणय वनरीिण की अनुमवत के वलए सभी माउवटोंग खुली और सभी ढक्कन, डोर और ब्लैंक फ्लैंज
हटाए जाने चावहए।
(2) वजस इकोनोमाइजर पर यह विवनयम लागू होता है,उसका मावलक वडस्कनेक्सन के उस तरीके के
वलए मुख्य वनरीिक से वलक्तखत रूप में मोंजूरी लेगा वजसका िह उपयोग करने का प्रस्ताि करता है और
यह सुवनवश्चत करने के वलए वजम्मेदार होगा वक अनुमोवदत पद्वत का तरीका ही असल में अपनाया जाए।
381. पंजीकरण के वलए प्रवहृया- (1) पोंजीकरण के वलए आिेदन प्राप्त होने पर वनरीिक
इकोनोमाइजर को परीिण के वलए तैयार करने के बाद, वडजाइन का पूरा वििरण लेगा और विवनयमो ोंद्वारा
अनुमत अवधकतम वीकीकायय कायायत्मक दबाि का पता लगाएगा।
(2) इकोनोमाइजर के वहस्सो ोंकी वफटनेस वनम्नवलक्तखत सूिो ोंके अनुसार वनधायररत की जाएगी:
(क) लगभग आयताकार हृास- सेक्शन का हेडर के वलए
P = C (t-2) समीकरण (11/3)
b2
जहाों
t = एक इोंच के 30 सेके ण्ड में मोटाई
b = तल की सपोटय करने िाले हेडर के वकनारो ोंके बीच दूरी, इोंच में
P= अवधकतम वीकीकायय कायायत्मक दबाि, पाउोंड प्रवत िगय इोंच में, (गेज)
C= 11 जहाों िाटर साइड सफे स फ्लैट हो
= 22 जहाों िाटर साइड सफे स िहृ हो, बशते वक िहृता वबना वकसी रूकािट के जारी रहे और वकनारे के
प्रत्येक छोर पर मोटाई C=11 द्वारा वनधायररत से कम न हो।
तथावप, वकसी भी क्तस्थवत में हेडर के वसरो ोंकी मोटाई प्रत्येक वहस्से के एक इोंच के तीस सेकण्ड से कम नही ों
होगी।
(ख) लगभग िृत्ताकार हृॉस- सेक्शन के हेडर के वलए
( )
समीकरण (11/4)
t= एक इोंच के तीस-सेके ण्ड की मोटाई346 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
P= अवधकतम वीकीकायय कायायत्मक दबाि पाउोंड प्रवत िगय इोंच में (गेज)
D= हेडर का बाहरी व्यास इोंच में
K= ग्रेड 16.5 ऑयरन के वलए 265
= ग्रेड 14 ऑयरन के वलए 240
= ग्रेड 12 ऑयरन के वलए 220
लोंबाई के उस वहस्से में हेडर के सादे बेलनाकार भागो ोंकी न्यूनतम मोटाई वजसमें ट्यूब होल नही ों
होते है, खोंड (घ) की आिश्यकताओ ोंका अनुपालन करेंगे।
तथावप, वकसी भी क्तस्थवत में वकसी भी वबयदु की मोटाई एक इोंच के तीस सेके ण्ड से कम नही ोंहोनी
चावहए।
(ग) ट्यूब्स के वलए-
समीकरण (11/5)
जहाों
t= एक इोंच के 30 सेके ण्ड में मोटाई
P= अवधकतम वीकीकायय कायायत्मक दबाि, पाउोंड प्रवत िगय इोंच में, (गेज)
D= ट्यूब का बाहरी व्यास इोंच में
K= 16.5 ग्रेड ऑयरन के वलए 265
= 14 ग्रेड ऑयरन के वलए 240
= 12 ग्रेड ऑयरन के वलए 220
C = 4 उस वहस्से के वलए जहाों वगल सुदृाीकरण के रूप में कायय करते हैं।
= 5 उस वहस्से के वलए वजसका सुदृाीकरण नही ोंहुआ है।
तथावप, वकसी भी क्तस्थवत में वकसी भी वबयदु की मोटाई एक इोंच के तीस सेके ण्ड से कम नही ोंहोनी चावहए।
(घ) विविध पाइप के वलए-[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 347
( )
P समीकरण (11/6)
जहाों,
t= एक इोंच के तीस-सेके ण्ड की मोटाई
P= अवधकतम वीकीकायय कायायत्मक दबाि, पाउोंड प्रवत िगय इोंच में (गेज)
D= पाइप का बाहरी व्यास (इोंच में)
K= ग्रेड 16.5 ऑयरन के वलए 265
= ग्रेड 14 ऑयरन के वलए 240
= ग्रेड 12 ऑयरन के वलए 220
तथावप, वकसी भी क्तस्थवत में, विविध पाइप या उप-खोंड की मोटाई एक इोंच के तीस सेके ण्ड से कम नही ों
होना चावहए।
(ङ) विस्तृत सतह के सामाोंतर ट्यूब, कनेरर बेंड के साथ कास्ट ऑयरन इकोनोमाइजर के वलए-
( )
समीकरण (11/7)
जहाों,
t= एक इोंच के 30 सेके ण्ड में बेंड को मोटाई
P= अवधकतम वीकीकायय कायायत्मक दबाि, पाउोंड प्रवत िगय इोंच में, (गेज)
D= बेंड को बाहरी व्यास इोंच में
K= ग्रेड 16.5 ऑयरन के वलए 265
= ग्रेड 14 ऑयरन के वलए 240
= ग्रेड 12 ऑयरन के वलए 220
तथावप, वकसी भी क्तस्थवत में 18.75 वक.ग्रा/ सें.मी2 (जी) (12.0 टन/ िगय इोंच) और 22.00 वक.ग्रा/ सें.मी2
(जी)(14.0 टन/ िगय इोंच) ग्रेड ऑयरन के वलए कनेक्तरड बेंड की मोटाई 10.3 वम.मी. (एक इोंच के 13 तीस
सेके ण्ड) से कम नही ोंहोनी चावहए 26 वक.ग्रा./ सें.मी2 (जी) (16.5 टन/ िगय इोंच) ग्रेड ऑयरन के वलए
कनेक्तरड बेंड की मोटाई 9.0 वम.मी. (एक इोंच के 11 तीस सेके ण्ड) से कम नही ोंहोनी चावहए।
(च) ट्यूब्स समीकरण (11/5) का अनुपालन करेगी।348 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(छ) विविध पाइप समीकरण (11/6) का अनुपालन करेगी।
(3) वनरीिक एक वनरीिण पुक्तस्तका (फामय-XVIII) के ज्ञापन में विवभन्न भागो ोंकी आिश्यक गणना के
साथ इकोनोमाइजर का पूरा वििरण दजय करेगा और इसे मुख्य वनरीिक को प्रस्तुत करेगा।
(4) यवद उपरोि िवणयत के अलािा, वकसी भी भाग पर लागू कोई सूि या गुणाोंक विवनयमो ोंमें वनवहत
नही ोंहै, तो मुख्य वनरीिक अपने वििेक से भाग की वफटनेस का वनधायरण करेगा।
(5) इकोनोमाइजर का वनरीिण करने और अवधकतम कायायत्मक दबाि वजस पर िह कायय कर सकता
है यह वनधायररत करने के बाद, वनरीिक विवनयम सोंख्या 383 के अनुसार हाइडरॉवलक परीिण को देखेगा
और फामय-XVII में एक अनोंवतम आदेश जारी कर सकता है।
(6) यवद उप विवनयम (5) के तहत अनोंवतम आदेश की आिश्यकताओ ोंको पूरा नही ोंवकया जाता है, तो
उसके बाद वबना वकसी वनरीिण और शुल्क के भुगतान के , पहले अनोंवतम आदेश जारी होने की तारीख से
अवधकतम चौबीस महीने की अिवध के अधीन नए अनोंवतम आदेश जारी वकए जाएोंगे।
382. वनरीिण के बाद की प्रवहृया- (1)(क) इकोनोमाइजर को साफ वकए जाने के बाद, सिम व्यक्ति
पूरी तरह से जाोंच करेगा जहाों तक इसका वनमायण अनुमवत देता है।
(ख) विशे रूप से फीड इनलेट वसरे पर िेक्तस्टोंग के वलए ट्यूबो ोंकी बाहरी क्तस्थवत को ध्यान से देखा जाना
चावहए और सभी सुलभ ट्यूबो ोंको कै वलबर वकया जाना चावहए।
(ग) कास्ट आयरन ट्यूबो ोंकी आोंतररक सतहो ोंपर जहाों तक सोंभि हो ग्रेफाइवटक िेक्तस्टोंग के वलए बारीकी से
देखा जाना चावहए और वकसी भी ट्यूब की फ्ल्ल्ोर की क्तस्थवत में इन्हें जाोंच के वलए तोड़ा जा सकता है तावक
अन्य ट्यूबो ोंकी सामान्य आोंतररक क्तस्थवत का अनुमान लगाया जा सके ।
(2) जहाों ट्यूब या अन्य भागो ोंकी िेक्तस्टोंग होती है, िहाों उनकी मजबूती की वफर से गणना की जानी
चावहये।
(3) स्क्रै पर वगयर का परीिण वकया जाना चावहये, यह नोट करने के वलए वक कोई भाग गायब तो नही ों
है, वक लैंथ ऑफ टरैिल पयायप्त है और वक स्क्रै पर को अच्छी प्रकार समायोवजत वकया गया है।
(4) सभी कै प बोल्ट् का वनरीिण वकया जाएगा, साथ ही डैम्पली और बैफि की क्तस्थवत और अिस्था
का वनरीिण भी वकया जाएगा।
(5) प्रत्येक वनरीिण और गणना का ररकाडय वनरीिण-पुक्तस्तका के ज्ञापन में वलखा जाना चावहये।
383. हाइडरॉवलक परीिण की प्रवहृया- (1) पोंजीकरण के वलए प्रत्येक इकोनोमाइजर का वनरीिक की
उपक्तस्थवत में अवधकतम वीकीकायय काययशील दबाि के 1.5 गुना प्रेशर पर हाइडरॉवलक रूप से परीिण वकया[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 349
जाना चावहये। जब सिम व्यक्ति द्वारा आिश्यक पाए जाने पर वनरीिण के बाद इकोनोमाइजर का
हाइडरॉवलक परीिण वकया जाएगा।
(2) जाोंच के बाद इकोनोमाइजर पर डाला गया परीिण दबाि इकोनोमाइजर के अवधकतम वीकीकायय
कायायत्मक दबाि का 1.25 से 1.5 गुना होगा। परीिण के दौरान, बाहरी और फ्लू के सभी भागो ोंमें लीके ज
को नोट वकया जाएगा।
384. वनरीिण पुल्पिका का ज्ञापन- (1) हर इकोनोमाइजर के वलए फॉमय-XVIII में एक वनरीिक
पुक्तस्तका तैयार की जाएगी और वनरीिक इस पुक्तस्तका में हाइडरॉवलक परीिण के वििरण के साथ-साथ
इकोनोमाइजर के पररमाप और अपने वनरीिण सभी ब्यौरे वलक्तखत रूप में दजय करेगा
(2) बाद के वनरीिण में, सिम व्यक्ति वनरीिण की तारीखें, हाइडरोवलक टेस्ट जब वकए जाएों, तो अलग-
अलग पाटटयस की क्तस्थवत से जुड़े नोटटस के साथ दजय करेगा;
(3) वनरीिक या सिम व्यक्ति, जैसा भी मामला हो, वनरीिण पुक्तस्तका के ज्ञापन में इकोनोमाइजर की
सामान्य क्तस्थवत और मरम्मत की क्तस्थवत भी दजय करेगा;
(4) (क) मुख्य वनरीिक को ज्ञापन पुक्तस्तका प्रस्तुत करने पर, िह नए पोंजीकृ त इकोनोमाइजर के मामले में,
सभी वििरण और कै लकु लेशन की जाोंच करेगा और वजस वडजाइन प्रेशर की अनुमवत दी जानी है, उसे
अनुमोवदत करेगा।
(ख) पुराने इकोनोमाइजर के मामले में, मुख्य वनरीिक, वनरीिक के वनरीिण नोटटस और मरम्मत के वलए
वदए गए प्रस्ताि की जाोंच करेगा।
(ग) इकोनोमाइजर के वलए एक बार अनुमोवदत वकया गया प्रेशर, मुख्य वनरीिक के वलक्तखत अवधकार के
वबना नही ोंबदला जाएगा।
(घ) वनरीिण पुक्तस्तका ज्ञापन को साफ़ और अद्यतन रखा जाएगा और वनरीिण पुक्तस्तका, जब तक वक
सिम व्यक्ति को असल में इसकी जरूरत न हो, मुख्य वनरीिक के कायायलय में रखी जाएगी।
385. पंजीकरण पुल्पिका- (1) इकोनोमाइजर के वलए एक पोंजीकरण पुक्तस्तका या वनरीिण पुक्तस्तका
ज्ञापन की प्रवत, वजसमें पोंजीकरण के वलए सभी जरूरी वििरण हो,ों मुख्य वनरीिक के कायायलय में फॉमय-
XVIII में रखी जाएगी और इकोनोमाइजर के बारे में उसके द्वारा पास वकए गए वकसी भी आदेश को उसके
आद्यािर के साथ पोंजीकरण पुक्तस्तका में दजय वकया जाएगा।
(2) मुख्य वनरीिक यह भी देखेगा वक वनरीिण पुक्तस्तका ज्ञापन में दजय वकए गए बाद के वनरीिण के नोट
को पोंजीकरण पुक्तस्तका में कॉपी वकया जाए।
386. वनरीिण पुल्पिका ज्ञापन और पंजीकरण पुल्पिका का हिांतरण- एक राज्य से दूसरे राज्य में
इकोनोमाइजर के हस्ताोंतरण पर, वनरीिण ज्ञापन और पोंजीकरण पुक्तस्तका उस राज्य के मुख्य वनररिक के
अनुरोध पर वजसको इकोनोमाइजर हस्ताोंतररत वकया गया है, उस अवधकारी को अग्रेव त वकया जाएगा जो
इसे अपनी वनगरानी में रखेगा और जैसा बताया गया उस प्रकार अनुरिण करेगा।350 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
387. प्रमाण-पत्र प्रदान करना- इकोनोमाइजर का उपयोग करने के वलए प्रमाण-पि फामय XIX में प्रदान
वकया जाएगा।
388. आकल्पस्मक दौरा- (1) वनरीिक यह नोट करेगा वक क्या इकोनोमाइजर सोंतो जनक ढोंग से काम
कर रहा है, और वक क्या ररलीफ िाल्व सही प्रकार से समायोवजत वकए गए हैं, और क्या सहृै पर वगयर
सोंचालन में है और क्या बाहरी ईोंट की वचनाई दरारो ोंसे मुि है।
(2) िह यह भी सुवनवश्चत करेगा वक कायय के वलए वनमायता- वदशावनदेशो ोंका मावलक द्वारा कठोरता से
पालन वकया जा रहा है।
नोट: यह सलाह दी जाती है वक ट्यूब और बॉटम हेडर को वीकेवटोंग और पररणामी बाहरी िरण से बचाने के
वलए इकोनोमाइजर के फीड इनलेट का तापमान 38॰ सेक्तियस से कम नही ोंहोना चावहए।
389. इकोनोमाइजर रेंवटग- रेवटोंग िगय मीटर में उस तापीय सतह के िेि के अनुरूप होनी चावहए
वजसकी गणना ट्यूब और हेडर से होगी।
390. पंजीकरण शुल्क- इकोनोमाइजर के पोंजीकरण के वलए आिेदन विवनयम 304 में वनवदयष्ट स उवचत
शुल्क के साथ वकया जाएगा।
391. प्रमाण-पत्र के निीनकरण के वलए शुल्क- इकोनोमाइजर के पोंजीकरण के प्रमाण-पि के
निीनकरण के वलए आिेदन जैसा विवनयम 305 में वनवदयष्ट स है के अनुसार उवचत शुल्क के साथ वकया
जाएगा।
392. रवजटरी संख्या की छपाई- (1) (क) प्रत्येक इकोनोमाइजर में एक प्लेट होनी चावहए वजस पर
उसका रवजस्टरी नोंबर छपा हो, जो विवशष्ट स स्थान में सुरवित होना चावहए और जहाों तक सोंभि हो तो मुख्य
स्थान में उस सोंख्या के साथ पहचान के वलए स्टाम्प होना चावहए।
(ख) पोंजीकरण सोंख्या की प्राक्तप्त की तारीख से 30 वदन की अिवध के अोंदर छपाई पूरी होनी चावहए।
(2) एक अिर ‚E‛ उपयुि उपकरण के पोंजीकरण सोंख्या के नीचे िाले अोंक से पहले लगाया जाएगा
जैसा वक विवनयम 301 में वदखाया गया है।
उदाहरण UP
E-53
(3) राज्य के मुख्य वनरीिक से छपाई क्तलप की प्राक्तप्त की वतवथ से 30 वदनो ोंके भीतर छपाई पूरी हो
जाएगी और सत्यापन के वलए तैयार होगी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 351
(4) (क) ऐसे इकोनोमाइजर वजनमें उप विवनयम (1) और (2) में वनधायररत रवजस्टरी उपकरणो ोंसे अलग
रवजस्टरी उपकरण है, तो ऐसे उपकरणो ोंके रवजस्टरी नोंबर को हृॉस वकया जाएगा या हटा वदया जाएगा और
पूिोि उप विवनयमो ोंमें वनधायररत वनयमो ोंके अनुरूप एक नई पोंजीकरण सोंख्या छापी जाएगी।
(ख) ऐसे इकोनोमाइजर की मूल सोंख्या को नए उपकरणो ोंमें रखा जाएगा, बशते वक इकोनोमाइजर ऐसे
िेि में काम करने िाले हैं, जो राज्य के पुनगयठन के पररणामवीकरूप दूसरे राज्य का वहस्सा बन गया है, तो
नए नोंबर राज्य के मुख्य वनरीिक द्वारा वदए जाएोंगे।
(ग) एक बार आोंिवटत सोंख्या को दूसरे इकोनोमाइजर में दोबारा इस्तेमाल नही ोंवकया जाएगा।
393. फीड पाइप का वनरीिण- (1)(क) फीड पाइप को उसके स्थान पर स्थावपत करने से पहले उसका
वनरीिण और हाइडरॉवलक परीिण वकया जाएगा, और हाइडरॉवलक परीिण दबाि इकोनोमाइजर के
अवधकतम वीकीकायय कायायत्मक दबाि को दुगना से कम नही ोंहोना चावहए।
(ख) मान्यताप्राप्त वनमायता या वनरीिक प्रावधकारी से एक प्रमाण-पि वक यह पूरा वकया जा चुका है इसे
वीकीकार वकया जा सकता है।
(ग) यवद वनरीिक या सिम व्यक्ति, जैसा भी मामला हो, परीिण से सोंतुष्ट स है, तो पाइप लगाया जा सकता
है।
(घ) फीड पाइप के वलए कोई अलग प्रमाण-पि जारी नही ोंवकया जाएगा और ना ही उनके वनरीिण के वलए
अलग से शुल्क वलया जाएगा।
(ड़) छपाई रवजस्टरी सोंख्या की प्राक्तप्त की वतवथ से दो महीनो ोंकी अिवध के भीतर पूरा वकया जाएगा।
(2) वनरीिण के बाद या वकसी भी समय, सिम व्यक्ति, फीड पाइप का बाहरी वनरीिण कर सकता है
और यवद िह इसे खराब क्तस्थवत में पाता है तो िह मुख्य वनरीिक को इस मामले की ररपोटय प्रस्तुत करेगा
जो अपेवित हो तो पाइप का हाइडरॉवलक परीिण कर सकता है।
394. फीड पाइप की योजना प्रिुत करना- (1) फीड पाइपो ोंके वनमायण की शुरूआत से पहले, फीड
पाइपो ोंकी सामग्री, वडजाइन और वनमायण की योजनाओ ों और वििरण की जाोंच के वलए 30 मी. पाइप के
वलए या उसके भाग के वलए शुल्क 200 रूपए होगा।
(2) फीड िाटर हीटर जैसी वकसी भी वफवटोंग की सामग्री, वडजाइन और वनमायण की योजनाओ ोंऔर
वििरणो ोंकी जाोंच के वलए प्रवत वफवटोंग 2500 रूपए शुल्क वकया जाएगा।352 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय- 12
िेल्डड वनमाषण के शेल टाइप बॉयलर
भाग-1
395. लागू होना- (1) ये विवनयम हृमश: अध्याय-4 और 10 में सोंदवभयत िाटर ट्यूब बॉयलरो ों और
इलेररोड के अलािा फ्यूजन िेल्डड वनमायण िाले बॉयलरो ोंपर लागू होगों े।
(2) जहाों बॉयलर का वडजाइन कों पोवजट वनमायण अथायतट फायर ट्यूब और िॉटर ट्यूब के सोंयोजन िाला है,
िहाों यह उस विशे प्रकार के वनमायण को वनयोंवित करने िाले सोंबोंवधत वनयमो ोंका पालन करेगा।
396. सामान्य आिश्यकताएं- जहाों लागू हो, वनमायताओ,ों वनरीिण प्रावधकरणो ों से प्रमाण-पि से सोंबोंवधत
अध्याय-1 की सामान्य आिश्यकताएों और वनमायण से सोंबोंवधत अध्याय-3 की प्रकार की आिश्यकताओ ों का
पालन वकया जाएगा।
397. कमषशाला के उपकरण- (1) िेक्तल्डोंग सोंयोंि और उपकरण अच्छी गुणित्ता के होने चावहए, और
उनका रख-रखाि कु शल काययशील क्तस्थवत में होना चावहए। िेक्तल्डोंग उपकरण किर के अोंदर होने चावहए
और इस प्रकार व्यिक्तस्थत होने चावहए वक विपरीत मौसमी पररक्तस्थवतयो ों और तेज हिाओ ों में भी िेक्तल्डोंग
कायय को जारी रखा जा सके । यह प्रवहृया इस प्रकार होनी चावहए वक िेक्तल्डोंग कायों की वनयवमत और
व्यिक्तस्थत मानीटररोंग की जा सके और िेक्तल्डोंग ऑपरेटरो ों को कारीगरी की गुणित्ता के दृवष्ट सकोण से
कमयशाला के परीिण अवधकाररयो ों द्वारा समय-समय पर वकया जाना है। इन परीिणो ों का ररकाडय रखा
जाएगा और जाोंच के वलए सिम व्यक्ति के वलए उपलब्ध होगा।
(2) कमयशाला िेक्तल्डोंग सोंयोंि उपकरण और गुणित्ता वनयोंिण कवमययो ों से युि होनी चावहए। हालाोंवक
विनाशकारी, गैर-विनाशकारी परीिण तथा प्रवहृया के वलए उपकरण आिश्यक नही ों है। विवनमायता इन
सुविधाओ ों के वलए बाहरी पि से समझौता कर सकता है और वजससे पि िह यह समझौता करता है, जो
उसका एक पि बॉयलर के मुख्य वनरीिक या उसके प्रवतवनवध को उपलब्ध कराया जाना चावहए और
परीिण के दौरान पि को प्रयोगशाला में सामग्री का वनरीिण करने की अनुमवत दी जानी चावहए।
398. वनमाषण की सामग्री - इन सामग्री के वनमायण में प्रयोग की जानी िाली प्लेट, सेक्शन और बार,
अध्याय-2 की आिश्यकताओ ों का सभी तरह से अनुपालन करेंगे। तथावप जहाों, तन्यता शक्ति 49.6
वक.ग्रा/िगय वम.मी से अवधक, तो िेक्तल्डोंग तकनीक, वजसमें पूिय ताप और पोस्ट हीवटोंग और प्रयोग की गई
प्लेट की तैयाररयाों शावमल हैं, का पूरा वििरण वनमायण कायय शुरू करने से पहले अनुमोदन के वलए वनरीिण
प्रावधकारी को प्रस्तुत करना होगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 353
399. िेल्पल्डंग से संबंवधत सामग्री- जहाों िेक्तल्डोंग से सोंबोंवधत सामग्री का प्रयोग वकया जाता है, िे विवनयम
71 से 76 की आिश्यकताओ ों का अनुपालन करेंगे, के िल िेल्ड मेटल के मामलो ों को छोड़कर, जहाों तन्य
शक्ति पलेट के वलए वनवदयष्ट स वनचली सीमा से कम नही ोंहोगी।
400. प्लेन और टे ट्यूब- (1) ट्यूब, विवनयम 30, 47 और 48 के प्रािधान का अनुपालन करेंगे।
(2) सीमलेस स्टील - हृॉस-टूयूब और अपटेक ट्यूब, हृमश: विवनयम 99 ओर 100 के अोंतगयत आएोंगे।
401. वनमाषण और कारीगरी- विवनमायता काम के हाथ में लेने से पहले अनुमोदन के वलए बॉयलर के
वनमायण को पूणय वििरण में वदखाते हुए पूरी तरह से आयामी खोंडिार डराइोंग के साथ वनरीिण प्रावधकारी को
प्रस्तुत करेगा। अनुदैर्घ्य और पररधीय सीम के वलए प्लेटो ोंकी तैयारी के आयामो ोंसवहत पूणय वििरण भी इस
डराइोंग में वदखाया जाएगा। स्टैंड पाइप िाोंच पाइप और सीवटोंग के वलए अटैचमेंट का वििरण वदखाते हुए
पूरी तरह से आयामी रेखावचि, अनुदैर्घ्य और पररधीय जोड़ और दूसरे खुली जगहो ोंसे सोंबोंवधत इन पुजों की
क्तस्थवत को डराइोंग में वदखाया जाएगा।
402. प्लेट की तैयाररयां- प्लेट की तैयारी के मामले में, विवनयम 77 की अपेिाएों लागू होगों ी। जब अलग-
अलग मोटाई की प्लेटो ोंपोंक्तिबद् की जाती हैं, तो िेक्तल्डोंग पतली प्लेट के वलए आिश्यक सहनशीलता और
कम पतली प्लेट से वमलती-जुलती होगी (वचि 12/1 का सोंदभय लें)
403. तनाि ररलीविंग- विवनयम 78 की अपेिाएों लागू होगों ी।
404. बेलनाकार सैल- विवनयम 80 की अपेिाएों लागू होगों ी।
405. सकषु लेररटी- (1) वकसी भी हृॉस सैक्शन पर मापे गए शेल के अवधकतम और न्यूनतम आोंतररक
व्यास के बीच का अोंतर साोंके वतक आोंतररक व्यास के 1 प्रवतशत से अवधक नही ोंहोना चावहए।
(2) बॉयलर की बाहरी वडजाइन फॉमय गेज के माध्यम द्वारा बॉयलर की बाह्य सतह पर मापी गई प्रोफाइल,
आोंतररक व्यास के एक चौथाई के बराबर लोंबी होनी चावहए वडजाइन फॉमय से और सारणी 12/1 में दी गई
प्रवतशतता से अवधक अलग नही ोंहोना चावहए।
तावलका 12/1: िेल्डेड बॉयलर के वडजाइन फॉमष से अलग होने की अवधकतम प्रवतशतता
हृम सोंख् या बॉयलर डी का साोंके वतक आोंतररक वडजाइन फॉमय से अवधकतम
व्यास, वममी. में वभन्नता, प्रवतशत में
(1) (2) (3)
1. 915 तक और 915 सवहत 0.375354 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
2. 915 से ज्यादा, 1150 तक और 1150 0.350
सवहत
3. 1150 से अवधक 0.300
(3) िेल्डेड सीम पर कोई फ्लैट नही ोंहोगों े और गोलाई से कोई भी स्थानीय वभन्नता, हृवमक होगी।
406. एंड प्लेट, हृाउन प्लेट और ट्यूब प्लेट- (1) िेल्डेड लोंकाशायर और कॉवनयश बॉयलर की एोंड
प्लेट को शेल प्लेट के साथ जोड़ने के वलए फ्लैंज वकया जाएगा।
(2) बॉयलरो ोंकी एोंड प्लेट की आिश्यकताओ ों के वलए, विवनयम 86 का उप-विवनयम (1) लागू होगा।
(3) अधय गोलीय हृाउन की आिश्यकताओ ोंके वलए, विवनयम 89 लागू होगा।
(4) फ्लैंज की आिश्यकताओ ोंके वलए, विवनयम 86 का उप-विवनयम (2) लागू होगा।
(5) वबना आग िाले बॉयलर के वनमायण में, जब वडस्क वसरे तापीय तल का वहस्सा नही ों बनाते, तो कोल्ड
स्पन वडश्ड वसरे को आई एस: 2825 के अनुरूप उपयोग वकया जा सकता है।
(6) जहाों फ्लेट को माउवटोंग में जोड़ने के वलए वडश्ड एोंड प्लेट में दबाया जाता है ि प्लेट और घुमािदार
सतह के जोड़ पर बड़ी विज्या बनाएोंगे, और शापय कॉनयर या टूल माकय नही ोंहोगों े, प्लेट अत्यावधक पतली नही ों
होगी।
(7) (क) ऐसी प्लेटें, वजनके वकनारे उभरे हुए हैं, िे उप-विवनयम (4) के अनुसार होगों ी, और उन भागो ों से
िेल्डेड होगों ा, वजनसे िे वनम्नानुसार जोड़ी जानी हैं:-
(i) वचि 12/7, 12/8, 12/9, 12/10 या 12/11 में वदखाए गए अनुसार बेलनाकार फायर बॉक्स या शेल से।
(ii) वचि 12/14, 12/15 या 12/16 में वदखाए अनुसार गए आोंतररक फ्लू ट्यूब से ।
(iii) वचि 12/16 में वदखाए गए अनुसार अपटेक से
(iv) वचि 12/19 में वदखाए गए अनुसार फायर बॉक्स रैपर प्लेट या ज्वलन चैंबर से ।
(ख) प्लेटें जो फ्लैंज नही ोंकी गई हैं को उन भागो ोंसे िेल्ड वकया जाएगा वजनसे उन्हें वनम्नानुसार जोड़ा जाना
हैः
(i) वचि 12/12 या 12/13 में वदखाए गए अनुसार शेल से ।
(ii) वचि 12/17 में वदखाए गए अनुसार आोंतररक फ्लू ट्यूब या अपटेक से।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 355
(iii)वचि 12/20, 12/21 या 12/22 में वदखाए गए अनुसार ज्वलन चैंबर या फॉयर बॉक्स रैपर प्लेट से ।
(ग) जहाों वडश्ड एोंड या हृाउन का उपयोग वकया गया है, िे शेल या फॉयर बॉक्स के बेलनाकार भाग के
साथ जुड़ने के वलए वकनारे उभरे हुए होगों े। घुमािदार बॉयलर की फॉयर बॉक्स हृाउन प्लेट और फ्लैट सेल
फॉयर बॉक्स या शेल के बेलनाकार भाग को जोड़ने के वलए वकनारे उभरे हुए होने चावहए।
(घ) अपटेक के वलए घुमािदार बॉयलर की फॉयर बॉक्स हृाउन प्लेट में खुला हुआ भाग उभरा हुआ होगा
और अपटेक का सोंयोजन पररधीय बटिेल्ड के माध्यम से बनाया जाना चावहए (वचि 12/3, 12/4, 12/5,
12/6 देखें)।
407. आंतररक वचमनी (फ्लूज)- (1) आोंतररक वचमनी अनुभाग में प्रत्येक को एक प्लेट द्वारा बनाया
जाएगा, वजसे ठोंडा होने पर गोलाकार रूप में घुमाया जाएगा। लोंबित जोड़ धातु चाप प्रवहृया द्वारा बट-
िेल्डेड का वमश्रण होना चावहए।
(2) हृॉस-सैक्शन के व्यास में अवधकतम अनुमत वभन्नता प्लेट की मोटाई का आधा, जो भी अवधक हो या 6
वम.मी से ज्यादा नही ोंहोनी चावहए।
(3) लोंबित िेल्ड, फनेस के वनचले वहस्से में लगाए जाएोंगे और िो कम-से-कम 150 वम.मी पर एक के बाद
एक खोंडो में िेक ज्वाइोंट लगाए जाएोंगे। यवद एक के बाद एक खोंड ट्यूब प्लेट या एोंड प्लेट या बोवलोंग हूप्स
से अलग हो, तो यह शतय लागू नही ोंहोगी।
(4) जहाों पररधीय जोड़ो के वलए फ्लू खोंडो ोंके वसरे को उभारा जाता है, िहाों उपयुि मशीनरी द्वारा एक ही
ताप पर फ्लैवजोंग की जाएगी।
(5) सभी वचमनी फ्लैवजोंज के वकनारो ों को मशीनी या मशीन द्वारा फ्लेम-कट वकया जाएगा (विवनयम 402
देखें)।
(6) फलैंर्ज् पररधीय जोड़ को, इस तरह व्यिक्तस्थत वकया जाएगा तावक िे पास िाली वचमनी के साथ या सेल
के पररधीय जोड़ो ोंके अनुरूप न हो।
(7) भट्टी का न्यूनतम मध्य आोंतररक व्यास शुद् ताप इनपुट के आधार पर वचि 12/ 23 में वदए गए व्यास
से कम नही ोंहोना चावहए।
(8) जहाों फनेस की वचमनी सादी या नालीदार खोंडो ों या दोनो ों से बनी होती है, िे एक दूसरे से फ्यूजन बट
िेल्डेड पररवध जोड़ो ोंसे जुड़े हो सकते हैं।
(9) (क) प्लेन फनेस की लोंबाई 3 मी. से अवधक नही ोंहोनी चावहए, के िल ररिसय फ्लेम बॉयलर को छोड़कर,
वजन्हें लचीला माना जाता है या िैसी होगी, जैसा वक खोंड (घ) में बताया गया है। अन्य सभी मामलो ों में,
फनेस के व्यास में कम-से-कम 150 वम.मी तक कोरूगेशन या ब्लोइोंग हूप्स या स्टेवपोंग के माध्यम से
फनेस में लचीलापन प्रदान वकया जाएगा। (वचि 12/24 से 12/28 तक देखें)।356 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) यवद नावलयो ों का उपयोग लचीला बनाने के वलए वकया जाना है तो फनेस की लोंबाई का कम-से-कम
एक वतहाई भाग नालीदार होना चावहये।
(ग) इस खोंड के अनुसार बनाए गए बॉयलरो ों के विवनयम 483 के अनुसार हिा आने की जगह होनी
चावहए।
(घ) खोंड (क) और (ख) के प्रािधानो ों के बािजूद, बॉयलर में 3 मी. से ज्यादा लोंबी प्लेन फनेस के उपयोग
की अनुमवत है, जब बॉयलर एोंड प्लेट के बीच लोंबाई 6.5 मी. से ज्यादा ना हो, बशते इस मामले में इस्तेमाल
वकया गया िीवदोंग स्पेस विवनयम 484 के अनुसार हो।
(10) जहाों पूरा फ्लू छोटे प्लेन खोंडो ों से बना होता है, िहाों पर आस पास के खोंडो ों के वसरो ों को या तो एक
विज्या तक बाहर वनकला हो तावक पयायप्त सपोटय और लोंबित लचीलापन प्रदान वकया जा सके और एक
साथ बट- बेल्ड वकया जा सके , या प्रत्येक तरफ की बॉवलोंग हूप को बट-िेल्ड वकया जा सके । आयाम, वचि
12/31, 12/32 या 12/33 का पालन करेंगे।
(11) ताप प्रवहृया द्वारा तनाि से राहत तब दी जाएगी, जब वचमनी के वनमायण में एक पररधीय िेल्ड का
उपयोग शावमल होता है। इस प्रकार के तनाि से राहत, सभी िेक्तल्डोंग के पूरा होने पर विवनयम 453 के
अनुसार दी जाएगी।
(12) एोंड प्लेटो ों से फ्लू कनेक्शन का फामय वचि 12/14, 12/15, 12/16,12/17 और 12/18 में वदखाए गए
प्रारूप के अनुसार होगों े, या वनरीिण प्रावधकारी के अनुमोदन के अधीन, िेक्तल्डोंग ग्रूि के वकसी भी रूप में
होगों े।
408.अपटेक- (1) अपटेक सीमलेस या इलेक्तररक रेवजस्टेंस िेल्डेड या फ्यूजन बट-िेल्डेड पाइप से
इलेक्तररक आकय प्रवहृया द्वारा बनाए जाएोंगे। इन पाइपो ों पर टॉलरेंस रेगुलेशन 251 की आिश्यकताओ ों का
अनुपालन करेंगे। अपटेक को वचि 12/3 और 12/4 के अनुसार फनेस हृाउन प्लेट के खुलने िाले ऊपरी
फ्लेंज से फ्यूजन बट िेल्ड वकया जाएगा। फायरबॉक्स हृाउन प्लेट के खुलने िाले फ्लेंज की गहराई, फ्लेंज
के घुमाि की शुरुआत से, प्लेट की मोटाई न्यूनतम 25 वममी. के साथ कम से कम दोगुनी होनी चावहए।
जब तक पूरे बॉयलर को बाद में स्टरेस ररलीि नही ोंवकया जाता, तब तक अपटेक और फायरबॉक्स हृाउन
प्लेट को िेक्तल्डोंग के बाद प्रभािी ढोंग से स्टरेस ररलीि वकया जाएगा। जहाों फायरबॉक्स हृाउन प्लेट को भी
फायरबॉक्स की बॉडी से फ्यूजन िेल्ड वकया जाता है, जैसा वक वचि 12/16 में वदखाया गया है, िहाों
अपटेक के साथ पूरा फायरबॉक्स सभी िेक्तल्डोंग पूरी होने पर हीट टरीटमेंट द्वारा प्रभािी ढोंग से स्टरेस ररलीि
वकया जाएगा।
(2) बॉयलर को हीट टरीटमेंट द्वारा अोंवतम रूप से स्टरेस ररलीि करने से पहले अपटेक को शेल हृाउन से
जोड़ा जा सकता है, जैसा वक वचि 12/17 में वदखाया गया है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 357
(3) जहाों अपटेक का िवटयकल सीम फ्यूजन िेल्ड वकया जाता है, िहाों िेक्तल्डोंग रेगुलेशन 432 का पालन
करेगी, और िेल्ड को इस तरह से व्यिक्तस्थत वकया जाएगा वक इसे बाहरी और आोंतररक रूप से िेल्ड वकया
जाए (देखें वचि 12/42)।
(4) यह िाोंछनीय है वक अपटेक में एक आोंतररक कास्ट आयरन लाइनर लगाया जाए, जो कम पानी के
स्तर से नीचे तक फै ला हो।
409. हृॉस-ट्यूब- विवनयम 99 की आिश्यकताएों लागू होगों ी।
भाग-2
फॉयर बाक्स और दहन कि
410. िवटषकल बॉयलर की फनेस – (1) िवटयकल बॉयलरो ोंकी फनेस, एक या अवधक लोंबाई के खोंडो ोंमें
बनाई जा सकती है, प्रत्येक खोंड को एक प्लेट से पूणय गोलाई में घुमाया जा सकता है। ऐसे मामलो ों में,
अियि खोंडो ों को विदटयुत बट-िेक्तल्डोंग द्वारा पररधीय रूप से जोड़ा जा सकता है। िेक्तल्डोंग विवनयम 432 के
अनुसार तनाि मुि होगी।
(2) िवटयकल बॉयलर के मामले में जहाों ट्यूब प्लेट फॉयर बॉक्स का वहस्सा बनाती है, जब िेल्डेड तनाि
मुि होगी तब ट्यूब प्लेट का वहस्सा, दो िवटयकल खोंडो ों और िवटयकल जोड़ िेक्तल्डोंग में वनवमयत वकया जा
सकता है।
(3) व्यास में अवधकतम अनुमेय वभन्नता, वकसी भी हृास सेक्शन पर 900 वम.मी व्यास तक के फॉयरबॉक्स
के वलए 6 वम.मी. से अवधक नही ोंहोनी चावहए, या 900 वम.मी. से अवधक व्यास िाले फॉयर बॉक्स के वलए
10 वम.मी, या प्लेट की आधी मोटाई, जो भी अवधक हो।
(4) गोल फॉयर बॉक्स अवधकाोंशत: पतला वकया जाएगा। प्रवत 300 वम.मी ऊों चाई पर व्यास में 38 वम.मी.
का टेपर लगाने की वसफाररश की जाती है। फॉयर बॉक्स और शेल के बीच तल पर पानी का स्थान 760
वम.मी. व्यास तक के बॉयलरो के वलए 50 वम.मी. से कम नही ों होना चावहए और व्यास में 760 वम.मी से
अवधक बॉयलरो ोंके वलए 63 वम.मी. से कम नही ोंहोना चावहए।
(5) िेक्तल्डोंग की विवध विवनयम 432 के अनुसार होगी।
(6) पानी की नवलयो ों को डालने के वलए फॉयर बॉक्स में बने फ्लैटो ों में फ्लैट घुमािदार सतहो ों के जक्शन
पर पयायप्त विज्या होनी चावहए और नोकों िाले कोनो ों या उपकरण के वनशान से मुि होनी चावहए। प्लेट
अनािश्यक रूप से पतली नही ोंहोनी चावहये।
(7) विज्या मुि उभरे हुए वकनारे चाहे फॉयर बॉक्स के साथ अवभन्न हो या अलग ररोंग358 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
के रूप में बनाया गया हो, अवधकाोंशतः उपयुि मशीनरी द्वारा एक ताप में बनाया जाएगा और आोंतररक
तनाि से बचने के वलए धीरे-धीरे ठोंडा होने वदया जाएगा।
(8) ररोंग ऑफ फॉयर सेि का मुखनाल या फाउोंडेशन ररोंग नरम स्टील के बने होगों े। ‘जेड’ सेक्शन का
उपयोग फाउोंडेशन ररोंग के वलए नही ोंवकया जाएगा।
(9) बेलनाकार शेल के साथ फॉयर बॉक्स का सोंयोजन, वचि 12/34, 12/35, 12/36 या 12/37 के अनुसार
होगा।
(10) फॉयर होि माउथपीस के सोंयोजन की विवध, वचि 12/40 या 12/41 के अनुसार होगी।
411. अधष-गोलीय फॉयर बॉक्स- (1) अधय-गोलीय फॉयर बॉक्स को मशीन द्वारा बनाने के वलए
प्रगवतशील चरणो ोंमें वबना पतला वकए दबाया जाएगा और पूरा होने पर एनील्ड वकया जाएगा।
(2) फॉयर बॉक्स को शेल से जोड़ने की विवधयाों, वचि 12/34, 12/35, 12/36 या 12/37 के अनुसार होगों ी।
(3) थ्रोट पीस और फॉयर होल माउथपीस के सोंयोजन की विवध, वचि 12/40, या 12/41, 12/43 या 12/44
के अनुसार होगी।
412. लोको टाइप फॉयर बॉक्स- (1) लोको टाइप फॉयर बॉक्स रैपर प्लेट के वकनारे अवधमानत: टेपडय
होने चावहए। शेल और फॉयर बॉक्स के बीच शी य पर पानी की जगह 63 वम.मी से कम नही ोंहोगी।
(2) जहाों फॉयर बॉक्स ट्यूब प्लेट या फॉयर होल प्लेट रैपर प्लेट के साथ सोंयोजन के वलए फ्लैर्ज् की गई है,
िेल्ड उभरे हुए वकनारे के झुकाि की शुरूआत और पेंचदार स्टे की पहली पोंक्ति में क्तस्थर होगा। (3)
फाउोंडेशन ररोंग के फॉयर होल माउथपीस के वलए ररोंग्स, अध्याय-2 में वनवदयष्ट स सामग्री के बने होगों े।
(4)फाउोंडेशन ररोंग के वलए जेड सेक्शन का उपयोग नही ोंहोगा। फॉयर बॉक्स का बाहरी के वसोंग के साथ
सोंयोजन वचि 12/37, या 12/30, 12/31 के अनुसार होगा।
(5)फॉयर होल माउथपीस के सोंयोजन की विवध वचि 12/40 के अनुसार होगी या, जहाों बाहरी आिरण
और फॉयर बॉक्स प्लेट को फॉयर होल बनाने के वलए पानी की और फ्लैंर्ज् वकया जाता है, िहाों फ्लैवजोंग के
घुमाि की शुरुआत से स्टेज की औसत वपच के आधे से ज्यादा दूरी पर स्क्रू ड स्टेज की एक ररोंग लगाई
जाएगी (वचि 12/45 देखें)।
413. िाटर कू ल्ड दहन कि- (1) दहन कि ट्यूब प्लेट और बैक प्लेट का रैपर प्लेट के साथ सोंयोजन
वचि 12/19, 12/20, 12/21, 12/22 के अनुसार होगा और जहाों ट्यूब प्लेट को रैपर प्लेट के साथ जोड़ने
के वलए वकनारो ोंको उभारा गया है, िहाों िेल्ड फ्लैयज के झुकाि की शुरुआत में और पेंचदार स्टे की पहली
पोंक्ति के बीच क्तस्थत होगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 359
(2) वचमनी ट्यूब की फनेस की सोंयोजन विवध, वचि 12/15, 12/16 या 12/17 के अनुसार होगी और
एक्सेस ओपवनोंग वचि 12/40, या 12/46 के अनुसार होगी।
भाग-3
414. बार टे और फॉयरबॉक्स टे
(1) प्रत्येक बार स्टे या फॉयर बॉक्स स्टे को एक ठोस रोल्ड बार से उसकी लोंबाई में िेल्ड के वबना बनाया
जाएगा, वसिाय इसके वक िह उस प्लेट से जुड़ा हो वजसे िह सपोटय करता है।
(2) ऐसे बार स्टे वजन पर आग में काम वकया गया हो उन्हें बाद में एनील्ड वकया जाएगा।
(3) इस बात को प्राथवमकता दी जाएगी वक जब बॉयलर में स्टे अपनी क्तस्थवत में हो, तो उसकी धुरी उस
प्लेट पर सामान्य होगी, जो इसे सहारा देती है, लेवकन जहाों इसे इस तरह से व्यिक्तस्थत नही ों वकया जा
सकता है, िहाों यवद स्टे, नट के साथ वफटेड हो तो नट और फ्लेट बीच में बेिल िाले िाशर उपलब्ध कराए
जाएोंगे।
(4) विवनयम 415 से 418 में दी गई वनम्नवलक्तखत विवधयो ों में से एक विवध द्वारा समवपयत प्लेटो ों के वलए स्टे
सुरवित वकए जाएोंगे:-
415. बार टेस- (i) प्लेन बार, प्लेटो ों में क्तक्लयररोंग छेद से गुजरते हुए और उनमें िेल्ड वकए हुए (वचि
12/50) देखें।
(2) प्लेन बार प्लेटो ों में छेद से गुजरते हुए और बाहर की ओर िाशर के साथ वफर होगों े, स्टे और िाशर को
प्लेट के साथ वचि 12/52, 12/53, 12/54, 12/55, 12/56, 12/57, 12/58, 12/59 में वदखाई गई वकसी
एक विवध द्वारा िेल्ड होने चावहए।
नोट: ऐसे विवनयम के प्रयोजन के वलए क्तक्लयररोंग छेद का अथय है मशीनीकृ त बेलनाकार छेद, वजसका
व्यास, बार स्टे से 2% से अवधक नही ोंहै।
416.फॉयरबॉक्स टे- (1)(क) पेंचदार स्टे, प्लेटो ोंके माध्यम से पेंच और प्रत्येक छोर पर पयायप्त हेड बनाने
के वलए या नट के साथ वफट वकया जाएगा या प्रोजेक्तरोंग वसरो ों को वचि 12/47 और 12/48 मे जैसा
वदखाया गया है उसके अनुसार वफलेट िेल्ड वकया जाएगा।
(ख) यह वसफाररश की जाती है वक जहाों स्टे को स्क्रू वकया जाएगा िहाों यह महीन धागे के साथ होगा और
स्टे और होि को एक सतत थ्रेड के द्वारा स्क्रू वकया जाएगा।
(ग) स्टे कम-से-कम प्रवत 25 वम.मी 11 महीन थ्रेड द्वारा वकया जाएगा।360 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(घ) स्टे पर स्क्रू थ्रेटटस साफ, चेक्स या खावमयो ों से मुि, पूरी गहराई, या सही मानक रूप और होि में
अच्छी तरह वफट होने िाला होना चावहए। मध्य भाग को अवधकाोंशत: थ्रेड के नीचे की और मोड़ा जाना
चावहए।
(2) प्लेन स्टे को प्लेट से मजबूती से िेल्ड वकया जाएगा। (वचि 12/49 और 12/50 देखें।
नोट: इस प्रकार का सोंयोजन, प्लेन बार स्टे के वलए भी उपयुि है।
(3) 350 वम.मी. से कम लोंबे सभी पेंचदार स्टे को प्लेट के अोंदरूनी वहस्से से परे 13 वम.मी की गहराई तक
5 वम.मी व्यास के सोंके तक वछद्र के साथ वडरल वकया जाना चावहए। स्टे जो एक तरफ छुपे हुए है उन्हें
खोखली स्टे बार से बनाया जाना बेहतर है।
417. फॉयर बॉक्स और दहन कि हृाउन के वलए गडषर टे - (1) जहाों गडयर स्टे बोल्ट् और नट से जुड़े
होते हैं, उन्हें साइड प्लेट के कोनो ोंया वसरो ोंपर लगाया जाएगा।
(2) सीधे हृाउन प्लेट से िेल्ड वकए गए गडयर स्टे, वचि 12/60, 12/61, 12/62, 12/63 या 12/64 के
अनुरूप होगों े। ऐसे गडयरो ोंको स्टरेस ररलीि करने से पहले हृाउन प्लेट में िेल्ड वकया जाएगा।
(3) प्रत्येक गडयर को हृाउन प्लेट पर वीकतोंि रूप से भार के अपने उवचत अनुपात को सोंभालने के वलए
पयायप्त मजबूत होना चावहए, और बोल्ट् या िेल्ड सोंयोजन में लागू भार को ले जाने के वलए पयायप्त हृॉस-
सैक्शनल िेि होना चावहए।
(4) गडयर के नीचे और हृाउन प्लेट के बीच का जलमागय, वजतना सोंभि हो उतना बड़ा होना चावहए, लेवकन
वकसी भी क्तस्थवत में 38 वम.मी. से कम गहरा नही ोंहोना चावहए।
418. गसेट टे- विवनयम 112 के उप विवनयम (1) की आिश्यकताएों लागू होगी।
भाग-4
419. एक्सेस- (1) उप विवनयम (2), (3) और (4) में दी गई आिश्यकताओ ों के अलािा विवनयम 135 के
उप विवनयम (1), (2), (3) और (4) में वनवदयष्ट स आिश्यकताएों लागू होगों ी।
(2) िवटयकल बॉयलरो ों में पानी की सोंकीणय जगह के नीचे, जहाों आोंतररक पहुोंच सोंभि नही ोंहै, वमट्टी के छेद
(मड होल) को बॉयलर की पररवध के चारो ों ओर समान दूरी पर व्यिक्तस्थत वकया जाना चावहए, वजनकी
सोंख्या सारणी 12/2 में दी गई सोंख्या से कम नही ोंहोगी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 361
तावलका 12/2: वनचले सफाई वछद्रो ंया वमट्टी के वछद्रो ंकी संख्या
हृम सों. बॉयलर का व्यास होि की
सोंख्या
(1) (2) (3)
1 610 वम.मी. और उससे अवधक लेवकन 915 वम.मी. से 3
अवधक नही।ों
2 915 वम.मी. से अवधक और 1525 वम.मी. से अवधक 4
नही।ों
3 1525 वम.मी. से अवधक और 1830 वम.मी. से अवधक 5
नही।ों
4 1830 वम.मी से अवधक और 2290 वम.मी. से अवधक 6
नही।ों
5 2290 वक.मी. से अवधक और 2590 वम.मी. से अवधक 7
नही।ों
6 2590 वम.मी. से अवधक और 2745 वम.मी. से अवधक 8
नही।ों
(3) लोको-टाइप बॉयलरो ोंमें सफाई के छेद या वमट्टी के छेद प्रत्येक वनचले कोने पर या बाहरी फॉयरबॉक्स
आिरण के कोनो ों में, वजतना सोंभि हो सके और फॉयर होल खोलने के ऊपर के शी य कोनो ों पर उपलब्ध
कराएों जाएोंगे और बैरल स्भोक बॉक्स के शी य समान सैंडल प्लेट के प्रत्येक कोने पर वमट्टी के छेद उपलब्ध
कराएों जाएोंगे।
(4) लोंकाशायर बॉयलसय के सामने के एोंड प्लेटटस के वनचले वहस्से में, इसी प्रकार के बॉयलर में, आोंतररक
फ्लू के साथ, जहाों भी सोंभि हो, एक मैनहोल वदया जाएगा।
420. मैनहोल फ्रे म, माउथपीस और डोर
(1) मैनहोल फ्रे म, माउथपीस, डोर या किर प्लेट नरम स्टील की बनी होगी। फ्रे म अण्डाकार होना चावहए
और जहाों ये फ्लैंर्ज् प्रकार के होगों े िहाों किर के वनकट होगों े और डोर को एक फ्लैट जुड़ने िाली सतह
प्रदान करेंगे। िैकक्तिक रूप से, उभरे हुए िृत्ताकार को बाहरी रूप से वफट वकया जा सकता है, जहाों
फ्लैंर्ज् टाइप को शेल के करीब रखा जाएगा।362 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) जहाों सोंभि हो, फ्रे म को बॉयलर की लोंबित मध्य रेखा के समान्तर छोटी दूरी के साथ शेल के साथ
जोड़ा जाएगा। ऐसे मामलो ों में जहाों शेल की मोटाई 14 वम.मी. के अोंडाकार फ्रे म से अवधक है या गोलाकार
माउथपीस वफट वकए जाएोंगे।
(3) अोंडाकार फ्रे म और बाहरी रूप से उठाए गए गोलाकार माउथपीस या तो
(क) वबना िेल्ड के िन पीस में बने होगों े, या
(ख) उपयुि रोल्ड सेक्शन से बने और फोजय–िेल्डेड, या फ्यूजन िेक्तल्डोंग द्वारा वनवमयत होगों े, बशते वक
िेक्तल्डोंग के बाद और बॉयलर से जोड़ने से पहले िे ताप प्रवहृया द्वारा स्टरेस ररलीव्ड हो ों – के िल ऐसे मामलें
को छोड़कर जब तक जाने के बाद पूरे बॉयलर को ताप प्रवहृया से गुजारा जाना हो।
(4) िेल्डटस को इस तरह से लगाया जाएगा वक ये बॉयलर की अनुप्रस्थ मध्य रेखा लाइन पर क्तस्थत हो
(विवनयम 430 देखें)।
(5) माउथपीस और किर के जुड़ने िाले फलैंज को सामने और वकनारो ों पर और बोल्ट् के वलए िहनीय
सतह पर मशीनीकृ त वकया जाएगा। जहाों बोल्ट् और नट को फ्लैंज के सोंपकय में मशीनीकृ त वकया जाएगा,
जोड़ो ों को वपच लाइन के बोल्ट् के वपच सकय ल के अोंदर और बाहर बनाया जाना चावहए, तावक उभरा हुआ
वकनारो के विरूपण की सोंभािना को रोका जा सके । किर प्लेटो ों को फ्रे म के आोंतररक व्यास के लगभग
आठिें वहस्से की गहराई तक बार की ओर रखा जाना चावहए।
(6) सभी वकनारो ोंको मशीनीकृ त या मशीन द्वारा फ्लेम-कट वकया जाएगा (विवनयम 402 देखें)।
(7) मैनहोल फ्रे म और सोंयोजन के विवभन्न प्रकार, वचि 12/65, 12/66, 12/67, 12/68 और 12/69 में
दशायए गए हैं। मैनहोल, हेड होल या एक्सेस ओपवनोंग कनेक्शन के वलए, जहाों विवनयम 463 के अनुसार
वकए गए मुआिजे की गणना के वलए िवतपूवतय प्लेटो ों की आिश्यकता नही ों होती है, वचि 12/108 का
उपयोग शेल के साथ सोंयोजन के वलए वकया जाना है।
421. आंतररक दरिाजे -विवनयम 137 की आिश्यकताएों लागू होगी।
भाग-5
422. माउवटंग के वलए सीवटंग- माउवटोंग हेतु सीवटोंग की आिश्यकताओ ों के वलए विवनयम 129 देखें।
माउवटोंग के सोंयोजन की आिश्यकताओ ोंके वलए, विवनयम 130 देखें।
423. टैड पाइप- जहाों स्टैंड पाइप का उपयोग हुआ हो, िहाों फ्लैंजेज को वकनारे पर मशीनीकृ त या
मशीन द्वारा फ्लेम - कट वकया जाएगा। बोक्तल्ट्ोंग फ्लैंजेज को जोड़ो और बोक्तल्ट्ोंग सतह पर मशीनकृ त वकया
जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 363
424. सैडल्स- जहाों सैडल का उपयोग हुआ हो, िहाों फ्लैंजेज के वकनारो ोंको मशीनीकृ त या मशीन द्वारा
फ्लेम कट वकया जाएगा। जोड़ो ों की सतह को मशीनीकृ त वकया जाएगा। माउवटोंग के सोंयोजन के वलए
स्टड, यवद सैडल के मध्य से पेंचदार हो तो पूरी माटाई के नट के साथ अोंदर की ओर वफट वकए जाएोंगे।
जहाों स्टड के छेद सैडल के मध्य से नही ों गुजरते िहाों फ्लेट में स्टड के पेंचदार वहस्से की लोंबाई स्टड के
व्यास से कम नही ोंहोनी चावहए।
425. पैड स- जहाों पैड का उपयोग वकया जाता है, िहाों जुड़ने िाली सतह को मशीनीकृ त वकया जाएगा।
पैड पयायप्त मोटाई की होनी चावहए, वजससे वक आोंतररक सतह को छेदे वबना माउवटोंग के वलए स्टड होल
की वडरवलोंग की जा सके और पैड में स्टड के पेंच िाले वहस्से की लोंबाई स्टड के व्यास से कम नही ोंहोनी
चावहए।
426. टैड पाइप का संयोजन- (1) शेल और एोंड प्लेट से जुड़े स्टैंड पाइप में वनम्नवलक्तखत वनमायण की
अनुमवत होगी।
(i) जब स्टैंड पाइप का आोंतररक व्यास 25 वम.मी से अवधक न हो तो स्टैंड पाइप की पानी के वकनारे पर
नट के साथ में कसा जा सकता है।
(ii) जहाों स्टैंड पाइप का आोंतररक व्यास 25 वम.मी. से अवधक है, लेवकन 50 मी.मी से अवधक नही ोंहै, िहाों
इसे कसा जा सकता है और सील िेल्डेड भी वकया जा सकता है।
(iii) िहाों स्टैंड पाइप का व्यास 50 वम.मी से अवधक है, इसे एोंड फ्लेट में िेल्ड वकया जा सकता है।
(2) स्टैंड पाइप सोंयोजन के बारे में उप विवनयम (1) में प्रािधान वनम्नवलक्तखत शतों द्वारा विवनयवमत वकया
जाएगा।
(i) जब स्टैंडपाइप को स्क्रू वकया जाता है, तो स्क्रू इोंग मानक पाइप थ्रेड का होगा।
(ii) स्टैंड पाइप को वचि 12/104, 12/105, 12/106, 12/107, 12/108, 12/109, 12/110, 12/111,
12/112, 12/113 और 12/118 में वदखाए गई वकसी एक विवध द्वारा या वनरीिण प्रावधकारी द्वारा
अनुमोवदत वकसी अन्य तरीके से जोड़ा जाएगा।
(iii) जहाों स्टैंडपाइप फ्यूजन-िेक्तल्डोंग द्वारा गाे जाते हैं, उन्हें बॉयलर से सोंयोवजत करने से पहले ताप प्रवहृया
द्वारा स्टरेस ररलीि वकया जाएगा, के िल उन मामलो ोंको छोड़कर जब पूरे बॉयलर की ताप प्रवहृया से गुजारा
जाना हो।
(iv) जहाों स्टैंड पाइप का बोर 127 वम.मी से अवधक न हो ना शेल में ओपवनोंग का व्यास 127 वम.मी से
अवधक न हो, वजस प्लेट से यह जुड़ी तो उस प्लेट की मोटाई का दुगुना हो, स्टैंड पाइप को बाद में िेल्ड
बनाने की ताप प्रवहृया के वबना प्लेट से िेल्ड वकया जाना चाहए। यवद ये सीमाएों पूणय प्लेट से ज्यादा हो,
वजससे स्टैंड पाइप जुड़ा है, तब िेक्तल्डोंग के पूरा होने पर ताप प्रवहृया द्वारा स्टरेस ररलीि वकया जाएगा।364 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
427. पैड का संयोजन-(1) शेल पर िेल्डेड पैड या वकसी एोंड प्लेट आोंतररक और बाहरी रूप से िेल्ड
वकए जाएोंगे।
(2) पैड के सोंयोजन की विवध वचि 12/115, 12/116 या 12/117 में दशायए अनुसार होगी। जहाों सीवटोंग का
बोर 127 वम.मी से अवधक नही ोंहै, या ओपवनोंग शेल का व्यास 127 वम.मी, जमा वजस प्लेट से यह जुड़ी है
उस प्लेट की मोटाई के दुगुने, से अवधक नही ोंहै िहाों पैड को इस प्रकार बनाए गए िेल्ड की उत्तरािती ताप
प्रवहृया के प्लेट से िेल्ड वकया जाना चावहए। यवद इन सीमाओ ोंको बााया जाता है तो पूरी प्लेट वजससे प्लेट
सोंलग्न है को िेक्तल्डोंग के पूरा होने पर हीट-टरीटमेंट द्वारा स्टरेस ररलीि वकया जाएगा।
428. जल और प्रेशर गेज का संयोजन- पानी के गेज और दबाि गेज साइफन को पैड या स्टैंडपाइप
के हस्तिेप के वबना सीधे फ्रों ट एोंड प्लेट से जोड़ा जा सकता है। बशते िे स्टड द्वारा फ्लैंज और सुरवित हो।
यवद स्टड प्लेट के माध्यम से स्क्रू वकए जाए, तो प्लेट की ओर पूरी मोटाई के नट वफट वकए जाएोंगे।
429. बोल्ट और नट- बोल्ट् और नट के वलए सभी होल वडरल्ड वकए जाएोंगे और जहाों ये फ्लैंजेज के
सोंपकय में है िहाों बोल्ट् और नट को मशीनीकृ त वकया जाएगा।
भाग-6
430. कं पेनसेवटंग प्लेट- सोंलग्न करने से पहले कों पेनसेट प्लेट शेल की सामग्री के समान होनी चावहए और
उन प्लटो ों के वनकट क्तस्थत होगों े, वजनसे उन्हें जोड़ा जाना है। इसमें यवद कोई िेल्ड है तो िह अनुप्रस्थ के न्द्र
लाइन पर क्तस्थत होगा।
431. ‘फ्यूजन िेल्ड’ शब्द की पररभार्ा- (1) इस अध्याय के प्रयोजन के वलए शब्द ‘फ्यूजन िेल्ड’ धातु
चाप प्रवहृया द्वारा किर वकए गए इलेररोड के साथ या वकसी अन्य इलेक्तररक चाप प्रवहृया द्वारा बनाए गए
सभी िेल्डेड सीमा पर लागू होता है, वजसमें आकय स्टरीम और वडपोवजट िेल्ड धातु को िायुमोंडलीय सोंदू ण
से बचाया जाता है।
(2) इस अध्याय के प्रासोंवगक प्रािधान, वसोंगल रन या हेिी रन िेक्तल्डोंग प्रवहृया पर भी लागू होगों े और उस
प्रवहृया द्वारा वनवमयत िेल्ड बॉयलर इस अध्याय के सभी विवनयमो ों का पालन करेंगे, वसिाय उनको ों छोड़कर
वजनमें उस प्रवहृया के कु शल उपयोग की विशे आिश्यकताओ ों के कारण विचलन आिश्यक है। इस
प्रकार सामग्री वनमायण कारीगरी, और परीिण (गैर-विनाशकारी और अन्यथा दोनो)ों की गुणित्ता को
वनयोंवित करने िाले सभी वनयम लागू होते हैं।
(3) जहाों इस अध्याय के विवनयमो ों के अनुरूप िेल्डेड सेल वसोंगल या हैिी रन प्रवहृया द्वारा बनाए गए हैं,
यह समझा जाएगा वक विवनयम 431, 432 और 433 पूरी तरह से लागू नही ोंहोते हैं। िेल्ड बनाने की विवध,
वनरीिण प्रावधकारी द्वारा अनुमोवदत होगी।
432. िेल्पल्डंग की विवध- (1) जोड़ो ों को प्लेटो ों के दोनो ों ओर से फ्यूजन िेल्ड वकया जाएगा। मुख्य िेक्तल्डोंग
प्लेट के दोनो ों ओर हो सकती है, जो भी वनमायता के वलए सबसे सुविधाजनक हो। प्लेट के दूसरे वहस्से को[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 365
िेल्ड करने से पहले, पहली साइड के नीचे की धातु को वग्रवडोंग, वचवपोंग, मशीवनोंग या दूसरी अनुमोवदत विवध
द्वारा हटा वदया जाएगा।
(2) जोड़ो ों को प्लेट के दोनो ों ओर या प्लेट के एक तरफ से िेल्ड वकया जा सकता है बशते िेक्तल्डोंग की
अपेवित गुणित्ता हावसल कर ली गई हो। प्लेट के दूसरे पि को िेल्ड करने से पहले, पहले पि के नीचे की
धातु को वग्रवडोंग, वचवपोंग, मशीवनोंग या अन्य अनुमोवदत विवध द्वारा हटा वदया जाएगा।
(3) धातु के अवतररि रन, िेल्डेड जोड़ को दोनो ों सतहो ों पर जमा वकए जाएोंगे तावक सुवनवश्चत हो सके वक
प्लेट की सतहो ोंके स्तर पर िेल्ड धातु को यथासोंभि पररष्कृ त वकया गया है।
(4) इस तरह की अवतररि िेक्तल्डोंग की मोटाई वनम्नवलक्तखत तावलका में वदए गए मानो ों से अवधक नही ोंहोनी
चावहए।
तावलका 12/3: अवतररि िेल्पल्डंग की मोटाई
सोंके वतक मोटाई, वम.मी में अवधकतम पुनबयलन, वम.मी में
पाइप और ट्यूवबोंग में अन्य िेल्ड
पररधीय जोड़
(1) (2) (3) (4)
1 3 तक 2.5 2.5
2 3 से अवधक से लेकर 5 तक (5 सवहत) 3.0 2.5
3 5 से अवधक से लेकर 13 तक (13 सवहत) 4.0 2.5
4 13 से अवधक से लेकर 25 तक (25 सवहत) 5.0 2.5
5 25 से अवधक से लेकर 50 तक (50 सवहत) 6.0 3.0
6 50 से अवधक से लेकर 75 तक (75 सवहत) नोट 4.0
7 75 से अवधक से लेकर 100 तक (100 सवहत) नोट 5.5366 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
8 100 से अवधक से लेकर 125 तक (125 सवहत) नोट 6.0
9 125 से अवधक नोट 8.0
नोट- 6 वम.मी या िेल्ड की चौड़ाई का 1/8 गुना, जो भी अवधक हो।
(5) िेल्ड की सतहें, वजन्हें बाद में रेवडयोग्राफ वकया जाना है, मोटी तरोंगो,ों ओिरलैप, ग्रूव्स, एबरप्ट ररजेज
और िैलीज से पयायप्त रूप से मुि होनी चावहए, तावक तनाि बााने िालो ोंसे बचा जा सके और रेवडयोग्राफ
और अन्य गैर विनाशकारी परीिण (एनडीटी) विवधयो ों की उवचत व्याख्या की गुोंजाइस रहे। यवद
रेवडयोग्राफी वफल्म की व्याख्या करते समय िेल्ड की सतह की क्तस्थवत के बारें में कोई प्रश्न है, तो वफल्म की
िास्तविक िेल्ड सतह से तुलना की जाएगी, या वचकनी आकृ वत प्रदान की जाएगी और रेवडयोग्राफी परीिण
से पहले प्लेट की सोंबोंवधत सतहो ोंके साथ फ्लश वकया जाएगा।
(6) सबमर्ज्य चाप या वकसी अन्य अनुमोवदत वीकचावलत प्रवहृया द्वारा िेल्ड वकए गए पररधीय शेल सीमो ों के
मामले में, एक समान सतह खत्म करने के वलए, ऐसे पररधीय िेल्ड, फ्लश डरेस्ड की आिश्यकता नही ोंहै।
उनकी सतह वफवनश और आकार, वनरीिण प्रावधकारी की वीकीकाययता के अध्यधीन है।
(7) अोंडर कट 0.8 वम.मी या दीिार की मोटाई जो भी कम हो के 10% से अवधक नही ोंहोनी चावहए, और
अोंडर कट, वडजाइन की दीिार की मोटाई को नही ोंछुएगी।
(8) िेल्ड की क्तस्थवत को वचव्त वकया जाएगा, िवतपूवतय प्लेट, दोहरी प्लेट या मैनहोल फ्रे म, प्रत्येक िेल्ड पर
कम-से-कम दो रन या धातु डीपॉवजट की जाएगी।
(9) स्टैंडपाइप, िाोंच पाइप, सीवटोंग, िवतपूवतय प्लेट, डबवलोंग प्लेट या मैनहोल फ्रे म लगाते समय, प्रत्येक िेल्ड
पर कम से कम दो रन या धातु वडपोवजट की जाएगी।
(10) अगला रन डीपॉवजट करने से पहले िेल्ड धातु के प्रत्येक रन को अच्छी तरह साफ वकया जाएगा और
लैग मुि वकया जाएगा।
433. िेल्डेड शेल सीम के प्रकार
लोंबित और मध्यिती पररधीय सीम यू या िी प्रकार के वसोंगल और डबल बट जोड़ (12/3, 12/4, 12/5
और 12/6 देखें) या वनरीिण प्रावधकारी द्वारा अनुमोवदत कोई अन्य प्रकार के साथ बना होगा। एोंड पररधीय
सीम, वचि 12/7, 12/8, 12/9, 12/10 12/11 या 12/12 के अनुसार या वनरीिण प्रावधकारी द्वारा
अनुमोवदत वकसी अन्य फॉमय के अनुसार होगी।
434.िेल्डेड सीम की मरम्मत - (1) वनमायता द्वारा वदए गए िेल्ड की वकसी भी मरम्मत के वलए पहले
सिम व्यक्ति द्वारा सहमवत दी जाएगी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 367
(2)(क) जहाों कवमयो ों को सीम की पूरी लोंबाई में वितररत वकया जाएगा, सभी कवमयो ों को दूर करने के वलए
वकसी भी लोंबित या पररधीय सीम से काटे जाने िाले भागो ों की कु ल लोंबाई, सीम की कु ल लोंबाई के 15
प्रवतशत से अवधक नही ोंहोनी चावहए।
(ख) तथावप, जब सभी दो एक ही वनरोंतर लोंबाई में क्तस्थत होते हैं, वजन्हें सभी दो ो ों को दूर करने के वलए
काटा जा सकता है, तब सीम की कु ल लोंबाई के 10 प्रवतशत से अवधक नही ोंहोना चावहए।
(3) वचवपोंग, मशीवनोंग या अन्य अनुमोवदत विवधयो ोंद्वारा कमी को काट वदया जाएगा।
(4) श्रेणी-I बॉयलर के मामले में, सभी मरम्मत वकए गए िेिो ोंका रेवडयोग्रावफक परीिण वकया जाएगा।
435. शेल की िेल्डेड सीम पर परीिण- (1) सभी िेल्डेड सीमो ोंका प्रवतवनवधत्व करने िाली परीिण प्लेट
को प्रत्येक लोंबित सीम के प्रत्येक छोर पर सोंलग्न वकया जाएगा। ये, वनवदयष्ट स परीिण सामग्री की तैयारी के
वलए पयायप्त आकार के होगों े। शेल प्लेट के मामले में, परीिण प्लेट के िल एक छोर पर क्तस्थत हो सकती है
(वचि 12/58 देखें)। जहाों शेल दो या दो से अवधक ररोंगो ों में बनता है, कों वपत लोंबित सीम को एक वनरोंतर
लोंबित सीम माना जाएगा, बशते िेक्तल्डोंग एक ही वनरोंतर सोंचालन में और एक ही सोंचालक या सोंचालको ों
द्वारा की गई हो। परीिण प्लेटो ों के वलए सामग्री को सोंबोंवधत प्लेट या उपयुि सीम बनाने िाली प्लेटो ों से
काटा जाएगा।
(2) परीिण सामग्री को काटने के वलए शेल प्लेट पर अपयायप्त सामग्री उपलब्ध होने की क्तस्थवत में, ये
वीकीकायय होगों े यवद िे वकसी अन्य प्लेट से बने हो,ों बशते वक यह समान कास्ट से बना हो। परीिण प्लेटो ोंको
काटने से पहल वनरीिण प्रावधकारी द्वारा मुहर लगाई जाएगी।
(3) परीिा प्लेटो ों में िेल्ड ग्रूि लोंबित सीम के सोंबोंवधत वकनारो ों के वलए अपनाई गई के समान होगी, और
सोंबोंवधत फ्यूजन सतह वनरोंतर एलाइनमेंट में होगी। िेक्तल्डोंग के दौरान परीिण प्लेटो ों को रीइनफोसय या
सपोटय वकया जा सकता है तावक िेक्तल्डोंग के दौरान िावपिंग के कारण कोई भी सापेि विस्थापन 50 से अवधक
न हो। परीिण प्लेटो ोंऔर सीम में िेल्ड धातु को समान सोंचालन में लगातार वडपॉवजट वकया जाना चावहए।
(4) वकसी भी परीिण प्लेट में िेल्ड की मरम्मत नही ोंकी जाएगी। यवद वकसी परीिण प्लेट की िेल्ड धातु में
कोई दो प्रकट होता है, तो उसकी पोजीशन स्पष्ट स रूप से प्लेट पर अोंवकत की जाएगी और परीिण
सामग्री को परीिण प्लेटो ोंके ऐसे भागो ोंसे चुना जाएगा, जो सिम व्यक्ति द्वारा तय वकया गया हो।
(5) िेक्तल्डोंग के दौरान 50से अवधक िाप्डय परीिण प्लेट को पहले ताप प्रवहृया द्वारा सीधा वकया जाएगा।
परीिण प्लेटो ों की ताप प्रवहृया के वलए विवनयम 453 देखें। (6) जहाों के िल पररधीय सीम है या जहाों
पररधीय सीम को िेल्ड करने की विवध, लोंबित सीम के वलए इस्तेमाल की गई विवध से वभन्न होती है, िहाों
परीिण प्लेट प्रदान की जानी चावहए।368 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
भाग-7
436. श्रेणी I बॉयलर का परीिण- (1) वनम्नवलक्तखत परीिणो ोंके वलए नमूनो ोंको परीिण प्लेट या प्लेटो ों
से चुना जाएगा और पहचान के वलए सिम व्यक्ति द्वारा मुहर लगाई जाएगी (वचि 12/71 और 12/72
देखें):-
(i) िेल्डेड सीम के वलए एक तन्यता परीिण नमूना।
(ii) एक सोंपूणय िेल्ड धातु तन्यता परीिण नमूना।
(iii) दो बेन्ड् परीिण नमूने।
(iv)दो प्रभाि परीिण नमूने।
(v) मैहृो परीिण के वलए प्रत्येक टेस्ट प्लेट से एक नमूना।
(2) नमूनो ों के आयाम, वचि 12/73, 12/74, 12/76, 12/77 और 12/78 में वदए गए रेखावचिो ों के अनुसार
होगों े। यवद आिश्यक हो तो शे परीिण प्लेटो ोंको पुन: परीिण के वलए रखा जाएगा। पुन: परीिण के वलए
वकसी भी नमूने को मूल नमूने के समान परीिण प्लेट से काटा जाएगा। िेल्डेड सीम को प्रस्तुत करने िाले
नमूनो ों को, यवद आिश्यक हो, मशीवनोंग शुरू होने से पहले ठोंडा वकया जाना चावहए। तन्यता और मोड़ के
नमूने, यवद व्यिहाररक हो, तो पूरी प्लेट की मोटाई के होने चावहए। बॉयलर के बाहर अोंदर के अनुरूप
तन्यता, मोड़ और चरपी नमूनो ोंकी सतहो ों को के िल हल्के ढोंग से तैयार वकया जाना चावहए, तावक मूल धातु
की रोल्ड सतह पूरी तरह से हटाई न जाए। जहाों एक दूसरे के साथ सटी प्लेटो ोंकी रोल्ड सतहें एक दूसरे के
साथ समतल नही ोंहोती हैं, िेल्ड के सामने िाली प्लेट का तब तक मशीनीकृ त वकया जाएगा जब तक वक
हटाई गई धातु की गहराई 0.8 वम.मी से अवधक न हो।
437. तन्यता परीिण:- (1) िेल्डेड जोड़; कम तन्यता खोंड के आयाम वचि 12/73 में वदखाए गए अनुसार
होगों े। कम वकए गए खोंड की चौड़ाई कम-से-कम 25 वम.मी होनी चावहए।
(2) यवद प्लेट की मोटाई 30 वम.मी से अवधक नही ोंहै, तो नमूने की मोटाई प्लेट की मोटाई के बराबर होगी,
और िेल्ड की सतह की अवनयवमतताओ ों को दूर करने के वलए नमूने की प्लेट की सतह को मशीनीकृ त
वकया जाएगा।
(3) यवद प्लेट की मोटाई 30 वम.मी से अवधक है, तो तन्यता परीिण कई कम वकए गए अनुभाग नमूनो ोंपर
वकया जाएगा, वजनमें से प्रत्येक की मोटाई कम-से-कम 30 वम.मी और चौड़ाई कम-से-कम 25 मी.मी के
प्रभािी हृॉस सेक्शन पर होगी। इन नमूनो ों को परीिण सामग्री से इस तरह वनकाला जाएगा वक तन्यता
परीिण िेल्ड जोड़ो ोंकी पूरी मोटाई को किर करें, जैसा वक वचि 12/74 में वदखाया गया है। तन्यता शक्ति
प्लेट के वलए वनवदयष्ट स वनचली सीमा से कम नही ोंहोनी चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 369
(4) सभी िेल्ड धातु तन्यता परीिण नमूने के आयात वचि 12/77 में वदए गए अनुसार होगों े। व्यास, िेल्ड के
हृॉस सेक्शन के अनुरूप अवधकतम सोंभि होगा, लेवकन वकसी भी मामले में 20 वम.मी से अवधक नही,ों गेज
की लोंबाई व्यास के पाोंच गुना के बराबर होगी। तन्य शक्ति प्लेट के वलए वनवदयष्ट स वनचली सीमा से कम नही ों
होनी चावहए। बााि नमूने के व्यास के पाोंच गुना या नमूने के हृॉस-सेक्शन िेि के िगयमूल के 5.65 गुना
की लोंबाई पर 20% से कम नही होना चावहए, और िेि में कमी 35 प्रवतशत से कम नही ोंहोना चावहए।
438. कोल्ड बेंड परीिण- (1) जैसा वक इस विवनयम में वदया गया है, दो बेंड टेस्ट वकए जाएोंगे:-
(2) एक नमूने का परीिण िेल्ड की बाहरी सतह के साथ तनाि में और दूसरे का आोंतररक सतह पर तनाि
के साथ वकया जाएगा। नमूना खोंड में आयताकार होना और िेल्ड के वलए लोंबित काट वदया जाएगा, तावक
चौड़ाई प्लेटो ोंकी मोटाई से डेा गुना से कम न हो। नमूने के नुकीले कोनो ोंको नमूने की मोटाई के 10% से
कम दायरे में गोल वकया जाएगा।
(3) जहाों प्लेट की मोटाई 32 वम.मी से अवधक न हो, िहाों नमूने की मोटाई परीिण प्लेट की पूरी मोटाई के
बराबर होगी। जहाों प्लेट की मोटाई 32 वम.मी से अवधक है, सभी मामलो ों में नमूने की मोटाई कम-से-कम
32 वम.मी होनी चावहए। तनाि में िेल्ड की बाहरी सतह के साथ परीिण वकए जाने िाले नमूनो ोंको िेल्ड की
आोंतररक सतह की स्थानीय धातु िेस्ट से काटकर तैयार वकया जाएगा तावक िाोंछनीय नमूने की मोटाई
प्राप्त की जा सके (वचि 12/78 क देखें)।
(4) तनाि में िेल्ड की आोंतररक सतह के साथ परीिण वकए जाने िाले नमूनो ोंको िेल्ड की बाहरी सतह की
स्थानीय धातु िेस्ट से काटकर तैयार वकया जाएगा, तावक िाोंछनीय नमूने की मोटाई प्राप्त की जा सके (वचि
12/78, ख देखें)। जहाों प्लेट की मोटाई दोनो ों नमूनो ों को प्लेट के एक ही टुकड़े से काटने की अनुमवत देती
है, जो नमूने प्लेट में एक-दूसरे के ऊपर क्तस्थत होते हैं (वचि 12/78, ग देखें), प्रत्येक नमूने को नमूने की
मोटाई के 5.2 गुना से कम की दूरी पर अलग सेट वकए गए सपोटय के बीच िेल्ड के बीच में रखा जाएगा
और नमूने की मोटाई के तीन गुना व्यास िाले एक फॉमयर के साथ सपोटय के माध्यम से दबाि वदया जाएगा।
(5) परीिण पूरा होने पर नमूने की बाहरी सतह पर कोई भी दरार या कमी नमूनो ोंहृॉस के साथ मापा गया
1.5 वम.मी या नमूने के लोंबाई के साथ मापे गए 3 वम.मी से अवधक नही ोंहोगा। नमूने के कानयर पर वप्रमैयोर
फे वलयर अवीकीकृ वत का कारण नही ोंमाना जाएगा।
439. प्रभाि परीिण- प्रभाि परीिण विवनयम 162 के अनुसार होगा।
440. मैहृो और माइहृो परीिाएं- (1) प्लेट की पूरी मोटाई और 13 वम.मी की चौड़ाई से कम चौड़ा
नमूना, मैहृो और माइहृो परीिा के प्रयोजन के वलए परीिण प्लेट के प्रत्येक सेट से उपलब्ध होगा।
(2) ताप प्रभावित िेि सवहत िेल्ड के एक पूणय हृॉस-सेक्शन की माइहृो-एवचोंग में सोंतो जनक पेनीटरेशन,
फ्यूजन और महत्वपूणय समािेशन या अन्य कवमयो ों का अभाि वदखना चावहए। यवद मैहृो-एवचोंग द्वारा
वदखाए गए िेल्ड की क्तस्थवत के बारे में कोई सोंदेह हो, तो दो सोंबोंधी जाोंच के वलए सोंबोंवधत िेि की सूक्ष्म
जाोंच की जानी चावहए।370 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
441. अस्वीकृ वत से पहले अवतररि परीिण- (1) विवनयम 435 से 443 के अनुसार वलया गया कोई
भी परीिण नमूना जो वनवदयष्ट स आिश्यकताओ ों को पूरा करने में विफल रहता है, तो प्रत्येक विफल नमूने के
वलए वनम्नानुसार पुन: परीिण वकया जाएगा।
(2) जहाों तन्यता परीिण का कोई भी पररणाम वनवदयष्ट स आोंकड़ो ों के 90% कम नही ों है, एक पुन: परीिण
वकया जाएगा। जहाों कोई भी पररणाम 90% से कम आता है, िहाों दो पुन: परीिण वकए जाएोंगे।
(3) जहाों बेंड नमूना वनवदयष्ट स आिश्यकताओ ों को पूरा करने में विफल रहता है, तो दो पुन:परीिण वकए
जाएोंगे।
(4) यवद प्रभाि परीिण वनवदयष्ट स आिश्यकताओ ों को पूरा करने में विकास रहता है, तो दो परीिण प्लेट से
वलए जाएोंगे, अोंवतम नमूने के प्रत्येक तरफ एक और इससे अलग 5 वम.मी से अवधक नही ोंवकया जाएगा।
(5) यवद यह पाया जाता है वक परीिण प्लेट के शे भाग के पुन: परीिण के वलए नमूने तैयार करने की
अनुमवत देने के वलए अपयायप्त धातु है, वजसमें से मूल नमूना वलया गया था, तो पुन: परीिण के वलए नमूना
उसी के विपरीत छोर के समान लोंबित सीम से सोंबोंवधत परीिण प्लेट से काटा जा सकता है।
(6) यवद कोई अवतररि परीिण वनवदयष्ट स आिश्यकताओ ों को पूरा करने में विफल रहता है, तो इन परीिणो ों
द्वारा दशायए गए िेल्डेड सीम को अवीकीकार कर वदया जाएगा।
442.परीिण के बाद के नमूने -यवद आिश्यक हो तो, परीिण के बाद नमूने परीिा के वलए वनरीिण
प्रावधकारी के वडस्पोजल पर होगों े।
443.रेवडयोग्रावफक परीिा- (1) बॉयलर के शेल के लोंबित और पररधीय बट-िेल्डेड सीम के प्रत्येक
वहस्से की रेवडयोग्रावफक या अलटरासॉवनक परीिा आिश्यक होगी। डराप पाइप और एक्सेस ट्यूब, ररिसयल
चेम्बर, फनेस के प्रत्येक लोंबित और पररधीय बट-िेल्डेड सीम 10%, रेवडयोग्रावफक परीिा के अधीन
होगों े। जाोंच वकए जाने िाले िेल्ड के प्रवतशत में लोंबित और पररधीय सीम के प्रत्येक इोंटरसेक्शन शावमल
होगों े। जहाों अल्ट्रासॉवनक जाोंच का उपयोग वकया जाता है, िहाों वनरीिण प्रावधकारी की सोंतुवष्ट स के वलए यह
प्रदवशयत वकया जाएगा वक उपकरण और उपयोग की जाने िाली तकनीक सोंतो जनक है। वनमायता यह
सुवनश्चत करेगा वक वनयोवजत ऑपरेटर उपकरण का उपयोग करने, तकनीक लागू करने और जाोंच के
पररणामो ोंकी व्याख्या करने में सिम है।
(2)रेवडयोग्रावफक प्राप्त करने में इस्तेमाल वकए तरीके इस प्रकार के होगों े वक िेल्ड जोड़ो पर मोटाई के 2%
के बराबर का अोंतर स्पष्ट स रूप से वदखाई दे। यह वनधायररत करने के वलए वक क्या इस पररणाम द्वारा
वीकीकृ त फॉमय का सोंके तक प्राप्त वकया जा सकता है, वजसमें सोंयुि मोटाई के 2% से अवधक बराबर भाग
शावमल नही ोंहै, उसे िेल्ड के आस-पास के िेि में रखा जाएगा, तावक प्रत्येक रोवडयोग्राफ पर एक ररकॉडय
बनाया जा सके । प्रत्येक िेल्ड के प्रत्येक खोंड को वचव्त वकया जाएगा, तावक रेवडयोग्राफ को प्रवतवनवधत्व
वकए गए सीम के विशे भाग से आसानी से जोड़ा जा सके ।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 371
(3) परीिा मूल वफल्मो ों से की जाएगी और िेल्ड की वीकीकाययता वनरीिण प्रावधकारी द्वारा तय की जाएगी।
असोंतो जनक समझे जाने िाले िेल्ड को विवनयम 434 की शतों के तहत खाररज या वनपटाया जाएगा और
पुन: रोवडयोग्राफ वकया जा सकता है। वफल्मो ों को वनमायता द्वारा सोंदभय के वलए न्यूनतम तीन ि य के वलए
रखा जाएगा।
नोट: (1) चुोंबकीय कण दो का पता चलाना- फे राइट स्टील के वलए, जहाों भी सोंभि हो, दो का पता
लगाने के चुोंबकीय तरीको ोंको वनयोवजत वकया जाएगा।
(2) डाई-पेनीटरेट दो का पता लगाना- डाई-पेनीटरेट या दो का पता लगाने के समान तरीको ोंको
ऑस्टेवनवटक या अन्य गैर-चुोंबकीय स्टील के वलए वनयोवजत वकया जाएगा।
(3) सभी नट-िेल्डेड जोड़ो ोंको रेवडयाग्रावफक, रेवडयोस्कोपी या अन्य अनुमोवदत विवधयो ोंजैसे अल्ट्रासॉवनक
परीिण, चुोंबकीय कण वनरीिण या तरल डाई पेनीटरेट वनरीिण द्वारा गैर- विनाशकारी परीिा के अधीन
वकया जाएगा। जब िेल्डेड घटको ोंपर रेवडयोग्राफी के स्थान पर रेवडयोस्कोवपक परीिा की जाती है, तो
वनम्नवलक्तखत आिश्यकताओ ों को पूरा वकया जाएगा, अथायत :-
(क) वनरीिण प्रावधकारी को अनुमोदन के वलए एक वलक्तखत प्रवहृया प्रस्तुत की जाएगी, वजसमें
वनम्नवलक्तखत शावमल होगों े:-
(i) सामग्री और मोटाई की सीमा
(ii) उपकरण योग्यता
(iii) परीिण िस्तु स्कै न योजना
(iv) रेवडयोस्कोवपक मापदोंड
(v) इमेज सोंसाधन मापदोंड
(vi) इमेज वडस्प्ले मापदोंड
(vii) इमेज सोंग्रह आिश्यकताएों
(viii) वीकीकार-अवीकीकार मानदोंड (कोड-सोंदभय)
(ix) प्रदशयन मूल्ाोंकन
(x) ऑपरेटर पहचान
(ख) रेवडयोस्कोवपक इमेज की गुणित्ता बााने के वलए वसस्टम को एक इमेज प्रोसेसर से जोड़ा जाएगा और
वसस्टम प्रदशयन गुणित्ता वनम्नवलक्तखत को प्रदवशयत करेगी-372 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(i) 3% का पतला खोंड वि म ग्रहणशीलता।
(ii) 2% का मोटा खोंड वि म ग्रहणशीलता।
(iii) प्रवत वम.मी तीन लाइन जोड़ो ोंका स्थावनक ररजॉल्ूशन।
(iv) आईक्यूआई ग्रहणशीलता- तार की सोंयुि मोटाई का 2%, जब तार का आईक्यूआई का उपयोग
वकया जाता है तो तार का व्यास अि प्रणाली की ग्रहणशीलता की धुरी के साथ प्रमुख होना चावहए।
(ग) सोंबोंवधत जोड़ के विशे भाग के साथ सह सोंबोंध के वलए रवडयोस्कोप को उवचत रूप से वचव्त वकया
जाना चावहए।
(घ) रेवडयोस्कोवपक परीिा डाटा ररकॉडय वकया जाएगा और कु शल रेवडयोस्कोवपक परीिा ररकॉडय द्वारा
वनवदयष्ट स रेवडयोस्कोवपक परीिा की तारीख के बाद वनरीिण प्रावधकरण, पयायप्त अिवध के वलए वनमायता सोंयोंि
में विवडयो, टेप, चुोंबकीय वडस्क या ऑवप्टकल वडस्क या वकसी अन्य इलेररॉवनक मीवडया पर सोंग्रवहत वकया
जाएगा। ररकॉडय प्रवतधारण अिवध के दौरान इसे वकसी भी समय उपलब्ध कराया जाएगा और परीिण
िस्तुओ ोंके सोंदभय में खोजा जा सके गा।
(ङ) जब रेवडयोस्कोवपक परीिा के पररणामवीकरूप कोई मरम्मत की जाती है, तो मरम्मत की प्रभािशीलता
का मूल्ाोंकन करने के वलए उसी रेवडयोस्कोवपक तकनीक का उपयोग करके मरम्मत िाले िेिो ों की वफर
से जाोंच की जाएगी।
(च) रेवडयोस्कोवपक परीिा डाटा की उवचत व्याख्या में सहायता के वलए, उपयोग की जाने िाली तकनीक
का वििरण डाटा के साथ होगा। इसे जानकारी में कम-से-कम, अनुमोवदत प्रवहृया आिश्यकताएों और
वसस्टम प्रदशयन परीिण डाटा अिश्य शावमल होना चावहए।
भाग-8
444. श्रेणी-II बॉयलर के वलए परीिण- (1) प्रत्येक लोंबित सीम से वनम्नवलक्तखत परीिणो ोंके वलए परीिण
सामग्री का चयन वकया जाएगा और पहचान के वलए सिम व्यक्ति द्वारा मुहर लगाई जाएगी:-
(i) परीिण प्लेट या प्लेट से:
(ii) िेल्डेड सीम के वलए तन्यता परीिण नमूना
(iii) एक बेंड परीिण नमूना
(iv) एक ररजिय बेंड परीिण नमूना
(v) एक वनक-िेक परीिण नमूना[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 373
(2) नमूने की क्तस्थवत वचि 12/79 में वदए गए रेखावचिो ोंके अनुसार होगी। यवद आिश्यक हो तो प्रत्येक
परीिण प्लेट के शे भाग को पुन: परीिण के वलए रखा जाएगा।
445. तन्यता परीिण- परीिण नमूने के आयाम वचि 12/73 में वदए गए रेखावचि के अनुसार होगों े।
नमूना 1 क, और नमूने को िेल्डेड सीम से आड़ा काट वलया जाएगा। जब उपलब्ध परीिण मशीन की
िमता पूरे नमूने का परीिण करने की अनुमवत नही ोंदेती है, तो दो सोंकीणय तन्यता नमूनो ों को प्रवतस्थावपत
वकया जाएगा। ये नमूने िेल्डेड जोड़ पर प्लेट की पूरी मोटाई में होगों े, और उनकी चौड़ाई उतनी ही बड़ी
होगी वजतनी परीिण मशीन उवचत रूप से अनुमवत देगी, बशते परीिण सामग्री का प्रभािी हृॉस सेक्शनल
िेि 968 िगय वम.मी. से कम न हो (वचि 12/74 नमूना 1ख देखें)। िेल्डेड सोंयुि नमूने की तन्यता शक्ति
प्लेट के वलए वनवदयष्ट स वनचली सीमा से कम नही ोंहोनी चावहए।
446. कोल्ड बेंड परीिण- (1) इस विवनयम में वदए गए अनुसार दो बेंड परीिण वकए जाएोंगे।
(2) एक नमूने का तनाि में िेल्ड की बाहरी सतह के साथ और दूसरे तनाि में आोंतररक सतह के साथ
परीिण वकया जाएगा। नमूने खोंड में आयताकार होगों े और िेल्ड के वलए आड़े काटे जाएोंगे, तावक चौड़ाई
प्लेट की मोटाई के डेा गुना से कम न हो। नमूनो ों के नुकीले कोनो ों को नमूने की मोटाई के 10% से कम
विज्या में गोल वकया जाएगा।
(3) तनाि में िेल्ड की बाहरी सतह के साथ परीिण वकए जाने िाले नमूने को स्थानीय धातु को िेल्ड की
आोंतररक सतह के िेस्ट से काटकर तैयार वकया जाएगा तावक िाोंछनीय नमूना मोटाई प्राप्त की जा सके
(वचि 12/78, ‘क’ देखें)। तनाि में आोंतररक सतह के साथ परीिण वकये जाने िाले स्थानीय धातु को िेल्ड
की बाहरी सतह के िेस्ट से काटकर तैयार वकया जाएगा, तावक िाोंछनीय मोटाई प्राप्त की जा सके (वचि
12/78, ‘ख’ देखें) जहाों प्लेट की मोटाई दोनो ोंनमूनो ों को प्लेट के समान भाग से काटने की अनुमवत देती है,
नमूने प्लेट में एक-दूसरे के ऊपर क्तस्थत होते हैं (वचि 12/78, ‘ग’ देखें)।
(4) प्रत्येक नमूने को िेल्ड के साथ सपोटय के बीच में लगाया जाएगा,जो नमूने की मोटाई के 5.2 गुना से
ज्यादा दूरी पर नही ोंहोगों े और नमूने की मोटाई के तीन गुना व्यास िाले एक फॉमयर से सपोटय के माध्यम से
धके ला जाएगा।
(5) परीिण के पूरा होने पर, नमूने की बाहरी सतह पर कोई भी दरार या दो पूरे नमूने में मापे गए 1.6
वम.मी या नमूने की लोंबाई के साथ मापने पर 3 वम.मी से अवधक नही ोंहोगा। नमूने के कोनो ों पर प्रीमैयोर
विफलता को अवीकीकृ वत का कारण नही ोंमाना जाएगा।
447. वनक-ब्ेक नमूना- (1) इस नमूने की चौड़ाई इसकी मोटाई के डेा गुना से कम नही ों होगी और
लॉट को िेल्ड के के न्द्र के माध्यम से नमूने के प्रत्येक पि में और बॉयलर बाहरी फे स के लोंबित काट
वदया जाएगा।
(2) इसके बाद नमूना िेल्ड में तोड़ा जाएगा और फ्रै क्चर, एक समरूप िेल्ड को प्रकट करेगा जो लैग
समािेशन, सरोंध्रता और कोसय वहृस्टलीयता से अवधकाोंशत: मुि होगा।374 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
448. अस्वीकृ वत से पहले अवतररि परीिण- यवद कोई भी परीिण नमूना विफल हो जाता है, तो दो
पुन: परीिण वकए जाएोंगे और दोनो ोंवनवदयष्ट स आिश्यकताओ ोंको पूरा करेंगे।
449. परीिण के बाद नमूना- यवद आिश्यक हो, तो परीिण के बाद नमूने को परीिा के वलए वनरीिण
प्रावधकारी के सुपुदय वकया जाएगा।
450. रेवडयोग्रावफक या अल्टरासॉवनक परीिा- श्रेणी-II बॉयलर में प्रत्येक लोंबित और पररधीय सीमो ों
को (एोंड प्लेट से शेल तक शावमल है) उसी स्थल पर रेवडयोग्रावफक या अल्ट्रासॉवनक परीिा से गुजारा
जाएगा।
भाग-9
451. श्रेणी III बॉयलर के वलए परीिण- वनम्नवलक्तखत परीिा के वलए नमूने परीिण प्लेट या प्लेट से चुने
जाएोंगे और पहचान के वलए सिम व्यक्ति द्वारा इन पर मुहर अोंवकत वकया जाएगा।
(i) एक फॉरिडय बेंड टैस्ट
(ii) एक ररिसय बेंड टैस्ट
452. रेवडयोग्रावफक या अल्टरासॉवनक परीिा- श्रेणी-III बॉयलर में प्रत्येक लोंबित और पररधीय सीम
(एोंड प्लेट से शेल तक शावमल है) स्थल रेवडयोग्रावफक या अल्ट्रासॉवनक परीिा के अध्यधीन होगी।
भाग-10
453. ताप प्रवहृया- श्रेणी I या श्रेणी II की अपेिाओ ों के तहत वनवमयत सभी बॉयलर को समस्त िेक्तल्डोंग पूरी
होने के बाद और विवनयम 123 के तहत हाईडरॉवलक परीिण से पहले ताप प्रवहृया द्वारा स्टरेस ररलीि वकया
जाएगा।
454. फ्यूजन- िेल्डेड बॉयलरो ंका िगीकरण- इस अध्याय के अोंतगयत रखे गए बॉयलरो ों का िगीकरण
तावलका 12/4 के अनुसार होगा।
तावलका 12/4: फ्यूजन- िेल्डेड बॉयलर का िगीकरण
हृम सं. िगीकरण अनुप्रयोग की सीमाएं न्यूनतम मोटाई
(1) (2) (3) (4)
1 श्रेणी I कोई सीमा नही ों 8 वम.मी
2 श्रेणी II जब वनम्नवलक्तखत सीमाओ ों को 915 वम.मी तक (915
पार न वकया जाए:- वम.मी सवहत) और[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 375
(क) अवधकतम वीकीकायय बॉयलर आोंतररक व्यास 8
कायायत्मक दबाि 7 वक.ग्रा/ वम.मी िाले
सेमी2
(ख) वक.ग्रा/ सेमी2 में अवधकतम
वीकीकायय कायायत्मक दबाि गुणा
आोंतररक व्यास, से.मी में- 940
3 श्रेणी III जब वनम्नवलक्तखत सीमाएों पार न 915 वम.मी से और 10
की गई हो: वम.मी आोंतररक व्यास
ऊपर बॉयलर
(क) अवधकतम वीकीकायय
कायायत्मक दबाि 2 वक.ग्रा/
सेमी2
(ख) वक.ग्रा/ सेमी2 में अवधकतम
वीकीकायय कायायत्मक दबाि 535
आोंतररक व्यास गुना सेमी में-
455. शेल्स- (1) श्रेणी-I बॉयलर के वलए पररधीय शेल का अवधकतम वीकीकायय कायायत्मक दबाि
विवनयम 169 और 170 के अनुसार वनधायररत वकया जाएगा।
(2) (क) श्रेणी II और श्रेणी III बॉयलर के वलए पररधीय शेल का अवधकतम वीकीकायय कायायत्मक दबाि
वनम्नाोंवकत सूि द्वारा वनधायररत होगा:-
P = (T-1.5) SC समीकरण (12/1)
0.7 D
जहाों,
T= वम.मी में शेल प्लेट की न्यूनतम मोटाई है।
P= वक.ग्रा/ सेमी2 में अवधकतम वीकीकायय कायायत्मक दबाि है।
D= वम.मी में अवधकतम आोंतररक व्यास है।
S= वक.ग्रा/ वम.मी2 में प्लेट की न्यूनतम तन्यता शक्ति है।
C= क्तस्थराोंक है जैसा नीचे वदया गया है376 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) हालाोंवक, वकसी भी क्तस्थवत में शेल का सुरिा फै रर 4 से कम नही ोंहोना चावहए या प्लेट की मोटाई
विवनयम 454 के तहत दी गई तावलका 12/4 में वनवदयष्ट स से कम नही ोंहोनी चावहए-
C= 27, जहाों श्रेणी II की अपेिाओ ोंका अनुपालन वकया जाता है
C= 23, श्रेणी III बॉयलरो ोंके वलए, जब स्टरेस ररलीव्ड हो
C= 21, श्रेणी III बॉयलरो ोंके वलए जब कोई स्टरेस ररलीव्ड न हो।
(3) जहाों बॉयलर में िैवतज ट्यूबो ोंका एक समूह होता है, तावक बॉयलर के वसरो ोंपर िवटयकल भार या शेल में
िैवतज सोंबोंधो ोंके रूप में कायय करने िाली ट्यूब प्लेट के दौरान ट्यूब प्लेटो ोंपर सीधा तनाि हो।
(क) बाहरी िवटयकल पोंक्ति ट्यूबो ोंमें प्रत्येक िैकक्तिक ट्यूब एक स्टे ट्यूब होगी;
(ख) ट्यूब प्लोटें की मोटाई और ट्यूबो ोंका पैक ऐसा होना चावहए वक भार लेने िाली सेक्शन धातु
वनम्नवलक्तखत सूि द्वारा वनधायररत शेल प्लेट पर अनुमत तनाि को बनाए रखने के वलए पयायप्त हो:
P = (T-2) SJ समीकरण (12/2)
2 D
जहाों,
T= वम.मी में ट्यूब प्लेट की मोटाई है
P= वक.ग्रा/ सेमी2 में अवधकतम वीकीकायय कायायत्मक दबाि है।
S= वक.ग्रा/ वम.मी2 में न्यूनतम तन्यता शक्ति है।
D= वम.मी में शेल की धूरी से ट्यूब होल के बाहरी पोंक्ति के के न्द्र के विज्य दूरी का दुगुना
है,
J= ट्यूब होल के माध्यम से प्लेट की प्रवतशत शक्ति है अथायतट
J = 100 (p-d) समीकरण (12/3)
P
p= वम.मी में ट्यूब की िवटयकल वपच है
d= वम.मी में ट्यूब होल की विज्या है
नोट: स्टे ट्यूब के बीच ट्यूब प्लेट ट्यूब की अपेिाओ ों के अनुरूप होगी। (विवनयम 469 देखें)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 377
456. शेल के वहस्से को बनाती हुई ट्यूब प्लेट की िैवतज शेल्फ- (1) बॉयलर के वसरे पर दबाि के
कारण िवटयकल भार को िहन करने के वलए ट्यूब प्लेटो ोंके िैवतज शेल्फ को सपोटय करने के वलए
आिश्यक गसेट की सोंख्या वनम्नवलक्तखत विवध से वनधायररत की जाएगी:
(क) दहन कि ट्यूब प्लेट के वलए गसेट की न्यूनतम सोंख्या वनम्नानुसार होगी:-
जहाों C 4560 से अवधक है 1 गसेट
जहाों C 6240 से अवधक है 2 गसेट
जहाों C 7440 से अवधक है 3 गसेट
(ख) स्भोक फोक्स ट्यूब प्लेट के वलए गसेट की न्यूनतम सोंख्या वनम्नाोंवकत होगी:
जहाों C 4560 से अवधक है 1 गसेट
जहाों C 8400 से अवधक है 2 गसेट
और C = PAD समीकरण (12/4)
t
जहाों,
A= शेल प्लेट के अोंदर से शेल का अवधकतम िैवतज आयाम है जो ट्यूब प्लेट के बाहर इोंच में है (वचि
12/75 देखें),
D= इोंच में बॉयलर की आोंतररक विज्या है,
P= पाउोंड प्रवत िगय इोंच में अवधकतम वीकीकायय कायायत्मक दबाि है
t= इोंच के तीसो ोंसेके ण्ड में ट्यूब की मोटाई है।
(2) शेल प्लेट, वजससे प्लेट के वकनारे जुड़े हुए हैं, 1.5 वम.मी से कम मोटी नही ोंहोनी चावहए, जो गोलाकार
के साथ शेल प्लेटो ोंपर लागू होने िाले सूि द्वारा आिश्यक है; और जहाों गसेट या अन्य स्टे शेल्ब में वफट
नही ोंहोते, एक ट्यूब प्लेट के बाहर से दूसरे के बाहर तक इन प्लेटो ोंके ऊपर और नीचे पररधीय सीम के
भागो ोंकी सामथ्यय सुरिा काकय के साथ 4.5 कम नही ोंहोगों े और बॉयलर के वसरे पर पूरा भार िहन के वलए
पयायप्त होगों े।
457. लंकाशायर और कॉवनषश बॉयलर के वलए वडश्ड एंड प्लेट- (1) वबना स्टे और आोंतररक दबाि के
अधीन लोंकाशायर और कॉवनयश बॉयलरो ोंके वडश्ड वसरो ोंके वलए अवधकतम वीकीकायय कायायत्मक दबाि
वनम्नवलक्तखत सूि द्वारा वनधायररत वकया जाएगा:378 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
P= (32 t – 203.2) S समीकरण (12/5)
R (67.35617)
जहाों,
t= एोंड प्लेट की न्यूनतम मोटाई, वम.मी में
P= अवधकतम वीकीकायय कायायत्मक दबाि, वक.ग्रा/ समी2 में (g)
R= वम.मी में एोंड प्लेट आोंतररक विज्या का किेचर
S= वक.ग्रा/ सेमी2 में प्लेट की न्यूनतम तन्यता शक्ति है।
(2) एोंड प्लेट की िहृता की आोंतररक विज्या शेल की बाहरी व्यास 1.5 गुना से ज्यादा न हो वजससे ये जुड़ी
है।
(3) एोंड प्लेट की फ्लैंज की आोंतररक विज्या प्लेट की मोटाई की चार गुना से कम नही ोंहोगी लेवकन वकसी
भी क्तस्थवत में 63 वम.मी से कम होगी।
(4) जहाों एोंड प्लेट में एक मैनहोल है, खुले हुए वकनारे को फ्लैज करके या ररोंग प्रदान करके प्रवतपूवतय की
जाएगी (वचि 12/65 देखें)।
(5) वकसी भी मामले में माइनर एक्तक्सस पर मापी गई फ्लैवजोंग या ररोंग की गहराई वनम्न सूि द्वारा वनधायररत
गहराई से कम नही ोंहोगी।
D = √TW समीकरण (12/6)
जहाों,
D= वम.मी में प्लेट के बाहर से सामने जोड़ तक मापी गई ररोंग या फ्लैग की गहराई है,
T= वम.मी में प्लेट की मोटाई है,
W= वम.मी में माइनर एक्तक्सस पर मापी गई खुली जगह की चौड़ाई है।
458. आंतररक दबाि के अधीन वडश्ड एंड
(1) िवटयकल बॉयलरो ोंऔर समान बॉयलर भागो ोंके गोलो और शी य के अक्तस्थर वसरो ोंके वलए, जब आोंवशक
गोलाकार रूप में डाला जाता है, तो अवधकतम वीकीकायय कायायत्मक दबाि वनम्न सूि द्वारा वनधायररत वकया
जाएगा:
P = 0.216 S (t-0.79) समीकरण (12/7)
R
जहाों,[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 379
P= वक.ग्रा/ सेमी2 (जी) में अवधकतम वीकीकायय कायायत्मक दबाि है,
t= वम.मी में एोंड प्लेट की माटाई है, लेवकन वकसी भी क्तस्थवत में इसकी मोटाई उस शेल की मोटाई से
कम नही ोंहोगी वजससे ये जुड़ी है।
R= वम.मी में वसरे की िहृता की आोंतररक विज्या है, जो इस शेल के बाहरी व्यास से ज्यादा रही होनी
चावहए वजससे जुड़ी है।
S= वक.ग्रा/ सेमी2 में प्लेट की न्यूनतम तन्यता विभोंजक सामथ्यय है, या जो भी इसके वलए अनुमत है।
(2) वजस आोंतररक विज्या पर हृाउन प्लेट को वडश वकया जाता है, िह उस वसलेण्डर के बाहरी व्यास से
अवधकतम नही ोंहोगी, वजससे यह जुड़ी है।
(3) शेल से फ्लैंज की िहृता की आोंतररक विज्या हृाउन प्लेट की मोटाई की चार गुना से कम नही ोंहोगी,
और वकसी भी क्तस्थवत में 63 मी.मी से कम नही ोंहोगी।
(4) फ्लैंज की िहृता की आोंतररक विज्या हृाउन प्लेट की मोटाई की दोगुना से कम नही ोंहोगी, और वकसी
भी क्तस्थवत में 25 वम.मी से कम नही ोंहोगी।
(5) जब वसरे पर एक मैनहोल हो तब सूि में (t-0.79) के वलए (t-3.97) प्रवतस्थावपत वकया जाएगा।
(6) लघु अि पर मापी गई बाहरी सतह से मैनहोल से वनकला हुआ वकनारो ोंकी कु ल गहराई कम-से-कम
बराबर होगी-
वम.मी में फ्लैंज की गहराई समीकरण (12/8)
जहाों T= वम.मी में प्लेट की मोटाई है और वम.मी में होल की माइनर एक्तक्सस W है।
(7) फ्लैंवजोंग विज्या की िहृता के प्रारोंभ से हृाउन प्लेट के खुली जगह की गहराई कम-से-कम 25 वम.मी
के साथ प्लेट की मोटाई के दोगुने से कम नही ोंहोनी चावहए।
459. विवनयम 458 में की कोई भी बात विवनयम 174 से 177 के अनुपालन में वडश के उपयोग पर रोक
नही ोंलगाएगी, जहाों एक अपटेक के साथ वफट न वकया गया हो।
460. बाहरी दबाि के अधीन वडश्ड एंड - (1) 12/7 समीकरण में गुणाोंक 0.216 वलए अनस्टे वडश्ड
वसरो ोंके मामले में, गुणाोंक 0.173 को प्रवतस्थावपत वकया जाएगा, और R प्लेट को िहृता की बाहरी विज्या
होगी, जो इस शेल के बाहरी व्यास से अवधक नही ोंहोगा, वजससे िह जुड़ा है।
(2) फनेस-फ्लेम के सोंपकय में आने िाली प्लेट के वलए गुणाोंक 0.151 होगा।
(3) वकसी भी क्तस्थवत में R/t 2.75 से अवधक नही ोंहोगा।380 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) फ्लैंज पर िहृता की आोंतररक विज्या एोंड प्लेट की मोटाई के चार गुना से कम नही ोंहोनी चावहए और
वकसी भी क्तस्थवत में 63 वम.मी से कम नही ोंहोनी चावहए।
(5) अपटेक तक फ्लैंज की िहृता की आोंतररक विज्या, हृाउन प्लेट की मोटाई की दोगुने से कम नही ोंहोनी
चावहए और वकसी भी क्तस्थवत में 25 वम.मी से कम नही ोंहोनी चावहए।
461. अधषगोलीय हृाउन- (1) आोंतररक दबाि के अधीन अधयगोलीय हृाउन के वलए अवधकतम वीकीकायय
कायायत्मक दबाि वनम्नाोंवकत सूि द्वारा वनधायररत होगा:-
(12/9)
जहाों,
t= वम.मी में प्लेट की मोटाई है
P= वक.ग्रा/ सेमी2 (g) में अवधकतम वीकीकायय कायायत्मक दबाि है
R= वम.मी में िहृता की आोंतररक विज्या है।
S= वक.ग्रा/ सेमी2 में प्लेट की न्यूनतम तन्यता शक्ति है।
C= क्तस्थराोंक है, जैसा वक उप-विवनमय (2) में वदया गया है।
(2) तथावप, वकसी भी क्तस्थवत में, हृाउन प्लेट की सुरिा का काकय विवनयम 454 के तहत दी गई तावलका
12/4 में वनवदयष्ट स से कम नही ोंहोना चावहए और न ही प्लेट की मोटाई कम नही ोंहोनी चावहए।
C= 0.4608 जहाों श्रेणी -1 की अपेिाओ ोंका अनुपालन वकया गया है,
C= 0.3888 जहाों श्रेणी -2 की अपेिाओ ोंका अनुपालन वकया गया है,
C= 0.3312 श्रेणी -3 के बॉयलरो ोंके वलए जब स्टरेस ररलीि हो,
C= 0.3024 श्रेणी -3 बॉयलरो ोंके वलए जब स्टरेस ररलीि हो,
462. मैनहोल और शेल में दूसरी खुली जगहें -विवनयम 139 की आिश्यकताएों लागू होगों ी।
463. शेल की खुली जगहो ंके वलए प्रवतपूवतष - (1) जहाों वकसी भी खुली जगह की चौड़ाई (बॉयलर के
लोंबित अि के सामाोंतर वदशा में मापी गई) की मोटाई के ढाई गुना से अवधक वम.मी में है और साथ ही 70
वम.मी से अवधक है, तो प्रवतपूवतय की जाएगी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 381
(2) कों पेनसेट वकया जाने िाला िेि शेल में काटे गए ओपवनोंग की अवधकतम चौड़ाई (बॉयलर के लोंबित के
सामाोंतर वदशा में मापा जाता है) और समान सामग्री के वबना छेद िाले सीमलेस शेल की मोटाई का गुणा
होगा। श्रेणी-1 बॉयलर की मोटाई विवनयम 169 और 170 के अनुसार वनधायररत होगी। श्रेणी II और श्रेणी III
बॉयलर के वलए समीकरण 12/1 द्वारा उसी अवधकतम वीकीकायय कायायत्मक दबाि के वलए क्तस्थराोंक C=35
होगा.
(3) जब वनम्नवलक्तखत िेि का योग कों पनसेट वकए गए िेि से कम ना हो तब कों पेनसेट िेि को पयायप्त माना
जाएगा:
(क) शेल की िास्तविक मोटाई के अोंतर को गुणा करके प्राप्त वकया गया िेि और एक समान वबना छेद
िाले सीमलेस शेल के वलए आिश्यक मोटाई की लोंबाई 2 (75 वममी + टीएस), से गुणा करके प्राप्त वकया
जाता है, जहाों ‘टी’ शेल प्लेट की िास्तविक मोटाई है वममी में।
(ख) फ्रे म या पैड का कु ल हृॉस-सेक्शनल िेि, या िाोंच या मैनहोल के मामले में, हेड होल ररोंग, मैनहोल
या िाोंच की दीिार के हृॉस-सेक्शनल िेि, हेड होल ररोंग मेनहोल या िाोंच के सेक्सनल िेि को कम करता
है, उसी बोर की हेड होल ररोंग वजसकी मोटाई विवनयमन 169 और 170 के अनुसार गणना की गई है, साथ
ही बाहरी भार को झेलने के वलए आिश्यक मोटाई। िेि को सीमा के भीतर इस तरह मापा जाएगा तावक
वचि 12/80 में (क+ख) 100 वममी से अवधक ना हो ।
(ग) ओिल आकार के व्यास के मैनहोल और हेड होल ररोंगो ोंकी गणना के वलए नीचे वदए गए सूि से गणना
की जाएगी:
D = a2 /b
जहाों,
a वममी में अोंडाकार फ्रे म की प्रमुख धुरी है।
b वममी में अोंडाकार फ्रे म की छोटी धुरी है।
(घ) जहाों एक फ्रे म, पैड या िाोंच की सामग्री में एक तन्य शक्ति होती है जो उस खोल से वभन्न होती है
वजससे िह जुड़ा होता है, कों पनसेट िेि को वनम्न अनुपात से गुणा वकया जाएगा:
प्रवतपूवतय भाग की तन्यता शक्ति
--------------------------------------------------
शेल प्लेट की तन्यता शक्ति382 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ड़) िेक्तल्डोंग वफलेटटस के हृॉस-सेक्शनल िेि।
(4) (क) ऐसे मामलो ोंमें जहाों उप-विवनयम (3) के (क), (ख) और (ड़) का योग कों पनसेटेड िेि से कम है,
एक िवतपूवतय प्लेट को शेल में िेल्डेड वकया जाएगा, इसका कु ल हृास सेक्सनल िेि, कमी के बराबर होगा
तथा जब प्लेट की सामग्री की तन्यता शक्ति शेल से वभन्न होती है, तो एलाउोंस उपरोिानुसार की जाएगी।
(ख) कों पेनसेट प्लेट को शेल प्लेट के अोंदर या बाहर सबसे सुविधाजनक रूप में लगाया जा सकता है और
इसका व्यास खोल के छेद की अनुदैध्यय चौड़ाई के दोगुने से अवधक नही ोंहोना चावहए।
(5)(क) वचि 12/80 में िेल्डेड िाोंच को दशायया गया है, वजसमें पूिोि आिश्यकताएों लागू होती हैं, जहाों:
W= वममी. में शेल के छेद की मोटाई है
T = वममी. में शेल की िास्तविक मोटाई है
s
T1= उप-विवनयम (2) में वदए गए अनुसार एक समान वबना छेद िाले वनबायध खोल की मोटाई है
T वममी में िाोंच की िास्तविक मोटाई है,
n=
T विवनयम 463 (3)(ख) में दी गई िाोंच की न्यूनतम मोटाई है,
2=
T वममी में बाहरी भार का सामना करने के वलए आिश्यक मोटाई= 3 वममी है, जब तक वक लोवडोंग
3=
को अवधक मोटाई की आिश्यकता के रूप में जाना जाता है और = 0 है जहाों कोई बाहरी लोवडोंग नही ोंहै,
T = वममी में िवतपूवतय प्लेट की न्यूनतम मोटाई है,
c
S = वकलो/सेमी2 में शेल प्लेट की न्यूनतम तन्यता शक्ति है
1
S = वकलो/सेमी2 में िाोंच की न्यूनतम तन्यता शक्ति है,
2
S = वकलो/सेमी2 में कों पेनसेट प्लेट की न्यूनतम तन्यता शक्ति है,
3
W= वममी में कों पेनसेट प्लेट की चौड़ाई है उसी प्लेट में मापी जाती है वजसे शेल छेद
के रूप में मापा जाता है।
(ख) कों पनसेटेड िेि
A = W x T1
(ग) कों पनसेशन के वलए उपलब्ध शेल का वहस्सा:
B =2(75+Ts) (Ts-T1)
(घ) कों पनसेशन के वलए उपलब्ध िाोंच का वहस्सा:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 383
C = 2 (100+Ts) [Tn – (T + T3)]
2 -
(ड़) कों पेनसेशन के वलए उपलब्ध िेल्ड का वहस्सा:
D= आोंतररक और बाहरी िेक्तल्डोंग पवट्टका का कु ल हृास सेक्सनल िेि है।
यवद A, (B+C+D) से बड़ा है, तो अोंतर को पूरा करने के वलए अवतररि कों पनसेशन की आिश्यकता है।
वचि 12/80 में वदखाए गए उदाहरण में यह एक कों पनसेवटोंग प्लेट के माध्यम से प्रदान वकया गया है, कु ल
कों पनसेवटोंग िेि ऐसा है वक (B + C + D) + Z, A से कम नही ोंहै, जहाों:
Z = 2 x W x T x S
c 3
--
S
1
464. उठा हुआ मैनहोल फ्रे म्स, किर प्लेट स और ज्वाइंट बोल्ट स- विवनयम 138 की आिश्यकताएों
लागू होगों ी ।
465. टैंडपाइप और ब्ांचेज- (1) माउोंवटोंग और वफवटोंग में शावमल होने के वलए सभी फ्लैंजेस की मोटाई
और बोक्तल्ट्ोंग इन विवनयमो ोंके पररवशष्ट स-च में वनधायररत आयामो ोंके अनुसार होगी। तथावप, वकसी भी क्तस्थवत
में फ्लैंजेस की मोटाई 13 वममी से कम नही ोंहोनी चावहए। एएसएमई, बीएस, ईएन, डीआईएन जैसे
अोंतरायष्ट सरीय कोड और मानको ोंके अनुरूप फ्लैंजेस का उपयोग आिश्यक दबाि और तापमान रेवटोंग को
पूरा करने के वलए वकया जा सकता है।
(2) (क) नोजल और अन्य कनेक्शनो ोंकी दीिार की मोटाई लागू लोवडोंग, अथायतट आोंतररक दबाि, बेंवडोंग
और क्तस्थर भार के वलए वनवदयष्ट स से कम नही ोंहोनी चावहए।
(ख) दबाि लोवडोंग विवनयम 455 द्वारा वनधायररत की जाएगी, लेवकन वकसी भी क्तस्थवत में मोटाई वनम्नवलक्तखत
सूि द्वारा गणना की गई मोटाई से कम नही ोंहोगी:
t = 0.04D + 2.5 mm समीकरण (12/10)
जहाों, t स्टैंडपाइप की मोटाई है और D कनेक्शन का बाहरी व्यास है। यवद िाोंच को पेंच से जोड़ा जाता है,
तो मोटाई 't' को थ्रेड के रुट पर मापा जाएगा।
(3) जहाों एक डबल फ्लैंज िाला स्टीम पाइप पतला होता है, बॉयलर और वफवटोंग में शावमल होने िाले
वनकले हुए वकनारे की मोटाई इन विवनयमो ोंके पररवशष्ट स-च के अनुसार फ्लैंज कनेक्शन पर पाइप के बोर के
अनुरूप होगी।384 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
466. टेड फ्लैट सफे स (िवटषकल बॉयलरो ंके हृाउन को छोडकर)- विवभन्न िेस्ड और स्टेड फ्लैट
प्लेटटस, और वजनके वलए इन विवनयमो ोंद्वारा िेवसज के साथ फ्लैट सतहो ोंके रूप में रहने की आिश्यकता
होती है, या समरूप व्यास के स्टे बोल्ट्टस की मोटाई के वलए गणना, वनम्न समीकरण द्वारा की जानी चावहए;
अथायतट-
P
e = Cd --- + e समीकरण (12/11)
1
f
1
जहाों,
P= वकग्रा-बल/ सेमी2 में अवधकतम वीकीकायय काययशील दबाि है,
e = वममी में, मोटाई है,
d = प्लेट के रहने िाले वबोंदुओ ोंके बीच वलए गए सबसे बड़े िृत्त का व्यास (वममी में) है
f = 0.85 f (f जैसा वक विवनयम 169 में पररभाव त वकया गया है), वकग्रा-बल/ सेमी2,
1
e = 0.75 वममी के बराबर अवतररि मोटाई है,
1
C= गुणाोंक नीचे दी गई तावलका में वदए गए मान के रूप या अपनाई गई सपोटय-विवध पर वनभयर करता है।
तावलका 12 / 5
हृ. सों घटक ‘ ’ का मूल्
(1) (2) (3)
1 फ्लैंज् ड एोंड प्लेट 0.32
फ्लैट एोंड प्लेटटस को दोनो ोंतरफ से शेल में िेल्डेड वकया
जाता है, और एोंड प्लेट की मोटाई का शेल प्लेट की
2 मोटाई से वनम् नवलक्तखत अनुपात होता है
≤ 1.4
> 1.4 ≤ 1.6 0.33[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 385
> 1.6 ≤ 1.8 0.36
> 1.8 ≤ 2.0 0.39
0.42
3 प् लेन फनेस 6.5 मीटर से कम या उसके बराबर लोंबी 0.3
4 ≤ 50 वममी गहराई के साथ नालीदार फनेस 0.32
≤ 6 मीटर लोंबाई के साथ > 50 वममी गहराई की
5 नालीदार भट्ठी 0.35
वजसकी लोंबाई > 6 मीटर है 0.37
6 बॉवलोंग हूप भट्ठी 0.35
7 दोनो ोंतरफ से िेल्डेड एक्सेस ररोंग 0.3
8 के िल एक तरफ से िेल्डेड एक्सेस ररोंग 0.45
9 गसेट या वलोंक स् टे 0.3
10 ट्यूब नेस्ट में स्टे ट्यूब 0.39
11 आइसोलेटेड स्टे ट्यूब 0.45
12 ग्रुप में स् टे बार 0.39
13 आइसोलेटेड स्टे बार 0.45
नोट :
i. फ्लैंज् ड एोंड प्लेटो ों के वलए, सबसे बड़े सकय ल का व्यास फ्लैंज की िहृता के प्रारोंभ से वलया
जाएगा।
ii. जब ऊपर िवणयत विवभन्न प्रकार के सपोटय के साथ सबसे बड़ा सकय ल आता है, तो गणना के
वलए ‘ ’ का औसत मूल् वलया जाना चावहए।
iii. यवद प्लेट फ्लेम वीकेप्ट है, तो मोटाई में 10% की िृक्तद् की जाएगी।
iv. इन प्लेटो ोंके वनमायण में उपयोग की जाने िाली िेक्तल्डोंग सामग्री में, उपयोग की गई प्लेट की
तुलना में अोंवतम तन्यता िमता कम नही ोंहोगी ।
467. िवटषकल बॉयलरो ंके वलए फ्लैट हृाउन प्लेट स
(1) फ्लैट हृाउन प्लेटटस को अपटेक और/या बार स्टे द्वारा सपोटय वकया जाएगा।
(2) शेल या फायर बॉक्स के वलए फ्लैंज की िहृता की आोंतररक विज्या, प्लेट की
मोटाई के चार गुना से कम नही ोंहोनी चावहए और वकसी भी क्तस्थवत में 63 वममी से
कम नही ोंहोनी चावहए, जहाों प्लेट को ऊपर उठाने के वलए लगाया जाता है, फ्लैंज
की िहृता की भीतरी विज्या प्लेट की मोटाई के दोगुने से कम नही ों होनी चावहए
और वकसी भी क्तस्थवत में 25 वममी से कम नही ोंहोनी चावहए।
(3) फ्लैट हृाउन प्लेट की मोटाई विवनयम 466 के अनुसार वनधायररत की जाएगी।
468. ट्यूब नेट स के बीच और उसके आस-पास िाइड िाटर प ेस
िाइड िाटर स् पेस पर प्लेट की मोटाई की गणना विवनयम 466 के अनुसार की जाएगी386 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
जहाों,
A = ट्यूबो ोंके कें द्र से कें द्र तक वममी में ट्यूब नेस्ट के बीच िाइड िाटर स् पेस की चौड़ाई है ।
B= वममी में िाइड िाटर स् पेस की सीमा पोंक्तियो ोंमें ट्यूबो ोंकी वपच है।
469. फ्लैट ट्यूब प्लेट और ट्यूब नेट स
(1) स्टे ट्यूब िे ट्यूब होते हैं वजनकी िेल्ड गहराई नोवमनल ट्यूब मोटाई प्लस 3 वममी के
बराबर होती है जैसा वक 12/84 (i) से (iv) वचि में दशायया गया है। ट्यूब नेस्ट के भीतर
इन स्टे ट्यूब की आिश्यकता नही ोंहोती है, वसिाय जब ट्यूब नेस्ट में ऐसे ट्यूब होते हैं जो
उस तरह विस्ताररत होते हैं जैसा वक वचि 12/82 (iii) में दशायया गया है।
(2) यवद ट्यूब नेस्ट में प्लेन ट्यूब होते हैं जो विस्ताररत और बीडेड, विस्ताररत और बेलेड होते
हैं जैसा वक वचि 12/82 (iv) में दशायया गया है या विस्ताररत और िेल्डेड (जैसा वक वचि
12/82 (i) और (ii) में दशायया गया है) िेल्डेड स्टे ट्यूब *जैसा वक वचि 12/82 (i) से (iv) में
दशायया गया है+ का उपयोग ट्यूब िेि के बाहर फ्लैट प्लेट लोवडोंग को ले जाने के वलए
पयायप्त सोंख्या में सीमा पोंक्तियो ोंमें वकया जाएगा ।
(3) प् लेन ट्यूबो ों और स्टे ट्यूबो ों के वलए जो 600 वडग्री सेक्तियस से अवधक अवग्न या गैस
तापमान के सोंपकय में आते हैं, िेल्डेड ट्यूबो ोंके वसरो ोंके िेल्ड और विस्ताररत ट्यूबो ोंके वसरो ों
को डरेस् ड फ्लश वकया जाएगा जैसा वक वचि 12/82 (iii) और (iv) में दशायया गया है। यवद
ये ज् यादा खुला नही ोंहै, तो िेल्डेड ट्यूबो ोंके वसरो ोंको िेल्ड से अवधक 10 वममी तक बााया
जा सकता है, या विस्ताररत ट्यूबो ों के मामले में, ट्यूबें ट्यूब प्लेट से अवधकतम 15 वममी
तक आगे बढाई जा सकती है।
(4) प्रत्येक स्टे ट्यूब को उन प्लेटो ों पर भार के अपने उवचत अनुपात को ले जाने के वलए
वडजाइन वकया जाएगा जो इसे सपोटय करती हैं। ट्यूब प्लेट में िेल्डेड स्टे ट्यूब की मोटाई
ऐसी होगी वक ट्यूब के सबसे पतले वहस्से पर अिीय तनाि 7.14 वकग्रा/वममी2 से अवधक
न हो।
(5) यवद स्टे ट्यूब का उपयोग ट्यूब नेस्ट के भीतर वकया जाता है, तो ट्यूब प्लेट की मोटाई की
गणना विवनयम 466 के अनुसार की जाएगी।
470. फ्लैट प्लेट में मैनहोल ओपवनंग
(1) जहाों मैनहोल फ्लैट प्लेटो ोंमें क्तस्थत हैं, िहाों ओपवनोंग के वलए उपयुि िवतपूवतय की जाएगी।
(2) ओपवनोंग के वकनारे को फ्लैंग करके या एक फै विके वटोंग ररोंग प्रदान करके िवतपूवतय की
जाएगी (वचि 12/65, 12/66, 12/67, 12/68 और 12/69 देखें)।
(3) फ्लैट फ्रों ट एोंड प्लेटटस के वनचले वहस्से में मैनहोल एक फ्लैंग्ड स्टरेंवथोंग ररोंग के साथ वफट
वकया जाएगा, वजसके फ्लैट वहस्से की मोटाई (1.5 टी + 3 वममी) से कम नही ोंहोगी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 387
जहाों, T = वममी में एोंड प्लेट की मोटाई है, और 2280 वममी और इससे अवधक के बॉयलर में,
मैनहोल फ्रे म के ऊपर फनेस के बीच और नीचे एोंड प्लेट के वहस्से को सुदृा करने के वलए एक
पीक वफट वकया जाएगा और इस पीक को सुरवित रूप से िेल्ड वकया जाएगा ।
(4) सभी मामलो ोंमें फ्लैंवजोंग या ररोंग की गहराई समीकरण 12/6 द्वारा वनधायररत की गई गहराई
से कम नही ोंहोनी चावहए।
नोट: जहाों मैनहोल मल्ट्ी-ट्यूबलर बॉयलरो ोंमें या अन्य बॉयलरो ोंकी फनेस के नीचे ट्यूब नेस्ट में या
उसके बीच क्तस्थत है, िहाों बाउोंडरी पोंक्तियो ोंमें स्टे ट्यूब्स, या गसेट स्टे, जैसा लागू हो, को मैनहोल के
यथासोंभि वनकट व्यिक्तस्थत वकया जाएगा।
471. प्लेन ट्यूबें
(1) प्लेन ट्यूबो ों को दोनो ों वसरो ों पर िेल्ड वकया जा सकता है, इनलेट पर िेल्ड वकया जा सकता
है और आउटलेट के अोंत में विस्ताररत वकया जा सकता है, या दोनो ों वसरो ों पर विस्ताररत
वकया जा सकता है। जहाों के िल ट्यूबो ों का विस्तार वकया जाता है, समानाोंतर रोलसय िाले
विस्तारको ों के साथ प्रोसेस वकया जाएगा, और ट्यूब का विस्ताररत भाग ट्यूब प्लेट की पूरी
मोटाई के समानाोंतर होगा। विस्ताररत ट्यूबो ों के अलािा इनलेट एोंड पर बेल-माउथ या
बीडेड वकए जा सकते हैं। जहाों ट्यूब को ट्यूब प्लेट में िेल्ड वकया जाता है, िहाों िेक्तल्डोंग से
पहले ट्यूब होल को पकड़ने के वलए ट्यूब को थोड़ा विस्त ाररत वकया जाना चावहए।
(2) बाहरी दबाि में ट्यूबो ोंकी मोटाई की गणना वनम्नानुसार की जाएगी:
P'D
T = -------- + C समीकरण (12/12)
1.6f
जहाों,
t = वममी. में, ट्यूब की न्यूनतम मोटाई
P’ = बाहरी अवधकतम वीकीकायय काययशील दबाि, वकलोग्राम / सेमी2(जी) में
D = वममी. में, बाहरी ट्यूब व्यास
C = कोरोजन एलाउोंस 0.75 वममी के रूप में वलया जाना है, लेवकन स्टेनलेस स्टील C = 0 है, उपयोगकताय
द्वारा िाोंवछत होने पर उच्च मूल् अपनाया जा सकता है।
f = विवनयम 244 के अनुसार वीकीकायय तनाि।
(3) वकसी भी मामले में, बाहरी दबाि में सीधे ट्यूबो ोंकी मोटाई नीचे वनवदयष्ट स से कम नही ोंहोगी:388 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 12/6
हृम ट्यूब का बाहरी व् यास (वममी) न्यूनतम मोटाई (वममी)
सों.
(1) (1) (2)
1 32 से अवधक नही ों 2.10
2 32 से अवधक लेवकन 39 से अवधक नही ों 2.28
3 39 से अवधक लेवकन 51 से अवधक नही ों 2.81
4 51 से अवधक लेवकन 70 से अवधक नही ों 3.12
5 70 से अवधक लेवकन 77 से अवधक नही ों 3.38
6 77से अवधक लेवकन 89 से अवधक नही ों 3.96
7 89 से अवधक लेवकन 102 से अवधक नही ों 4.26
(4) आोंतररक दबाि - आोंतररक दबाि में ट्यूबो ोंकी मोटाई की गणना वनम्नानुसार की जाएगी:
P.D
t= ---------- + C समीकरण (12/13)
P +2f
जहाों,
P= = आोंतररक अवधकतम वीकीकायय काययशील दबाि, वकग्रा/सेमी2 (जी), और अन्य वसोंबल ऊपर
उप-विवनयम (2) में दशायए गए स्पष्ट सीकरण के अनुसार ।
(5) वकसी भी क्तस्थवत में, आोंतररक दबाि में सीधे ट्यूबो ोंकी मोटाई नीचे तावलका 12/7 सूचीबद् से
कम नही ोंहोगी:
तावलका 12/7
हृम ट्यूब का बाहरी व् यास (वममी) न्यूनतम मोटाई (वममी)
सों.
(1) (1) (2)
1 39 से अवधक नही ों 1.75
2 39 से अवधक लेवकन 51 से अवधक नही ों 2.16
3 51 से अवधक लेवकन 70 से अवधक नही ों 2.40[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 389
4 70 से अवधक लेवकन 77 से अवधक नही ों 2.60
5 77 से अवधक लेवकन 96 से अवधक नही ों 3.05
6 96 से अवधक लेवकन 102 से अवधक नही ों 3.28
7 102 से अवधक लेवकन 127 से अवधक नही ों 3.50
472. ट्यूबो ंकी वपच
ट्यूब होल की दूरी की गणना नीचे दी गई विवधयो ोंमें से वकसी एक के अनुसार की जाएगी:
(i) ट्यूब होल की दूरी की गणना इस तरह की जाएगी वक ट्यूब होल के बीच वकसी भी
वलगामेंट की (वममी में) न्यूनतम चौड़ाई वनम् नवलक्तखत से कम न हो:
जहाों,
D वममी में, ट्यूब छेद का व्यास है।
(ii) ट्यूब होल् स के बीच प्लेट की मोटाई और हृॉस-सेक्शन वनम् नवलक्तखत से कम नही ों होना
चावहए:
0.125D + 5.08 = वममी में न्यूनतम मोटाई,
4.318 D+16.13= वममी2 में न्यूनतम हृॉस-सेक्शन
(iii) ट्यूब होल की दूरी = िगय वममी में न्यूनतम हृॉस-सेक्शन / प्रदान की गई ट्यूब प्लेट मोटाई
जहाों, D वममी में ट्यूब होल का व्यास है।
वकसी भी क्तस्थवत में ट्यूब िेि में वकसी भी ट्यूब प्लेट की न्यूनतम मोटाई वनम्नवलक्तखत सीमा से कम
नही ोंहोगी:
T = 13 वममी, जहाों ट्यूब होल का व्यास 51 वममी से अवधक न हो।
T = 14 वममी, जहाों ट्यूब होल का व्यास 51 वममी से अवधक है।
473. टे ट्यूब
(1) स्टे ट्यूब सीमलेस स्टील या विदटयुत प्रवतरोधी िेल्डेड स् टील की होनी चावहए।
(2)स्टे ट्यूब की न्यूनतम मोटाई विवनयम 119 के अनुसार होगी।
(3) स्टे ट्यूब में पेंच के वलए अवधकतम वीकीकायय काययशील दबाि की गणना वनम्नवलक्तखत सूि द्वारा की
जाएगी:
समीकरण (12/14)390 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
जहाों,
P अवधकतम वीकीकायय काययशील दबाि वकलोग्राम/सेमी2 (जी) में
D वममी में थ्रेडटस के ऊपर स्टे ट्यूब का व्यास।
D वममी में थ्रेडटस के नीचे ट्यूबो ोंका आोंतररक व्यास।
1
N प्रवत वममी थ्रेड की सोंख्या।
A िगय वममी में, एक स्टे ट्यूब से सपोटेड िेि है, वजसे स्टे ट्यूब के कें द्र से कें द्र तक मापा जाता है। जब
िेि में ट्यूब या ट्यूब के वहस्से होते हैं, तो उनके कु ल िेिफल की गणना, उनके बाडी के सबसे छोटे बाहरी
व्यास से की जाती है जब िह तनाि में होता है और सबसे छोटा आोंतररक व्यास जब दबाि में होता है, को
आकृ वत िाले िेि से घटाया जाएगा और शे िेि को सूि में A के रूप में उपयोग वकया जाएगा ।
(4) जहाों स्टे ट्यूबो ोंमें प्लस थ्रेडटस प्रदान करने के वलए पेंचदार वसरो ोंपर उनकी मोटाई बााई जाती है,
िहाों बाी हुई मोटाई िेक्तल्डोंग द्वारा नही ों बक्तल्क अप्सेवटोंग करके प्राप्त की जाएगी, और ट्यूबो ों को
बाद में एनील्ड वकया जाएगा।
(5) स्टे ट्यूब्स को स्क्रू या मेटल आकय िेक्तल्डोंग द्वारा ट्यूब प्लेट से जोड़ा जा सकता है।
(6) जहाों स्टे ट्यूबो ों को ट्यूब प्लेट में पेंच वकया जाता है, उन्हें एक सतत धागे से पेंच वकया जाएगा जो
दोनो ों चार वसरो ों पर प्रवत सेंटीमीटर 4 थ्रेड से अवधक पतला नही ोंहोगा और रोलर विस्तारक द्वारा
ट्यूब प्लेटो ोंमें विस्ताररत वकया जाएगा और यवद िाोंवछत है, तो सील िेल्डेड वकया जा सकता है।
(7) स्टे ट्यूबो ोंका िेल्डेड जुड़ाि जैसा वक वचि 12/81, 12/82, 12/83, 12/84 और 12/85 में दशायया गया
है।
474. ट्यूब प्लेट स का संपीडन
(1) फायर-बॉक्स या दहन कि ट्यूब प्लेटो ोंके वलए जो रूफ प्लेट पर दबाि के कारण सोंपीड़न के
अधीन हैं, का अवधकतम वीकीकायय काययशील दबाि होगा:
समीकरण (12/15)
जहाों,
t वममी में, ट्यूब प्लेट की मोटाई
p वममी में, ट्यूबो ोंकी वपच, िैवतज रूप से मापा जाता है जहाों ट्यूबो ोंको चेन वपच वकया जाता है या वतरछे
जहाों ट्यूबो ोंको वजग जैग वपच वकया जाता है और विकणय वपच िैवतज से कम होता है।
D वममी में, प्लेन ट्यूबो ोंका आोंतररक व्यास।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 391
L फायर-बॉक्स या दहन कि की आोंतररक लोंबाई वममी में, वजसे ट्यूब प्लेट और फायरहोल प्लेट या बैक
प्लेट के बीच शी य पर मापा जाता है, या दो विपरीत फनेस के वलए दहन किो ोंके साथ डबल एोंडेड
बॉयलरो ोंमें ट्यूब प्लेटो ोंके बीच मापा जाता है।
C = 61.16706
बशते वक उपरोि सूि उन फायरबॉक्सो ोंके मामलो ोंमें लागू नही ोंहोगा जहाों गडयसय ट्यूब प्लेट पर नही ोंहोते
हैं, या जहाों रूफ प्लेट बाहरी शेल या शेल द्वारा सपोटेड गडयसय पर ही सीधे वटकी रहती है।
(2) जहाों गडयसय साइड प्लेटटस पर होते हैं या रूफ प्लेट इस प्रकार बनी होती है वक लोड साइड
और एोंड प्लेट दोनो ोंद्वारा िहन वकया जाता है, प्लेटो ोंपर कों प्रेवसि स्टरेस वकसी भी क्तस्थवत में 984
वकग्रा / सेमी2 से अवधक नही ोंहोगा।
475. फायर-बॉक्स और दहन चैंबर हृाउन के वलए गडषसष
(1) आयताकार फायर-बॉक्स के हृाउन प्लेटटस को सपोटय करने िाले गडयसय के वलए, जहाों गडयसय के
वसरो ों को लोंबित एोंड या साइड प्लेटटस द्वारा सपोटय वदया जाता है, उनके अनुपात की गणना
वनम्नवलक्तखत सूि द्वारा की जाएगी:
CSTd2
P = -------- समीकरण (12/16)
L2Y
जहाों,
P अवधकतम वीकीकायय काययशील दबाि वकलोग्राम/सेमी2 (जी) में है
S सामग्री का न्यूनतम तन्यता तनाि वकलोग्राम/सेमी2 में है,
T वममी में स्टे की कु ल मोटाई।
d वममी में गडयर स्टे की गहराई,
L सपोटय की विवध के अनुसार, ट्यूब प्लेट के अोंदर और फायर-होल प्लेट के बीच या साइड प्लेट के
बीच में वममी में, मापी गई गडयर स्टे की लोंबाई है
Y वममी में, गडयर स्टे की वपच है।
C = 0.352 स्टील प्लेट या स्टील फोवजिंग के वलए,
= 0.304 स्टील काक्तस्टोंग के वलए392 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) जहाों गडयसय को हृाउन प्लेट में िेल्ड वकया जाता है, िेल्ड के आयाम ऐसे होगों े, वक थ्रोट की मोटाई से
गुणा करके प्रत्येक गडयर को जोड़ने िाले िेल्ड की प्रभािी लोंबाई के योग के बराबर िेि पर पररकवलत
तनाि तावलका 12/13 में उपयुि िेल्ड कारक से गुणा करके 527 वक ग्रा / सेमी.2 से अवधक नही ोंहोगा।,
("प्रभािी लोंबाई" और "थ्रोट की मोटाई" को विवनयम 486 में पररभाव त वकया गया है)। िेल्ड पर भार को
उस अवधकतम वीकीकायय काययशील दबाि के रूप में वलया जाएगा जो ‘LY’, L और Y िेि पर कायय कर रहा
है, जैसा वक इस विवनयमन में पररभाव त है।
476. गडषर ल्पस्लंग टे
क्तलोंग गडयसय के वलए क्तलोंग, वलोंक्स, वपन्ऱ और शेल के कनेक्शन में अनुपात, पूरे भार को िहन करने के
वलए पयायप्त होगा, जो अन्यथा गडयसय के टोज पर और तनाि िाले उपरोि वकसी भी वहस्से पर होगा
वजसका तनाि कु ल खोंड का 633 वकग्रा/cm2 और शीयर में पुजों के वलए कु ल खोंड के 562 kg/cm2 से
अवधक नही ोंहोगा। डबल शीयर के भागो ोंके मामले में, खोंड के शुद् िेि को एकल खोंड के 1.875 गुना के
रूप में वलया जाना चावहए।
477. फायर बॉक्स और सकषु लर फनेस के वलए टे
(1) दहन किो ों और फायर-बॉक्स में सावलड स्क्रू स्टे के वलए और अनुदैध्यय और हृॉस स्टे के
वलए, स् टे हेतु अवधकतम वीकीकायय काययशील दबाि की गणना वनम्नवलक्तखत सूिो ोंमें से उपयुि
एक से की जानी है:
C 1.28 2
P= - - - D- --
A N समीकरण (12/17)
C x D 2
1
P= ---------- समीकरण (12/18)
A
जहाों,
P = वकलोग्राम/सेमी2 में अवधकतम वीकीकायय काययशील दबाि है,
D = वममी में थ्रेड के ऊपर स्टे का व्यास है,
D = वममी में अपने सबसे छोटे वहस्से पर स्टे की बॉडी का व्यास है,
1
N = प्रवत वममी में स्टे के थ्रेड की सोंख्या है,
A = िगय वममी में िह िेि है, जो लोको-टाइप बॉयलरो ोंके फायर-बॉक्स ट्यूब प्लेटो ोंमें ट्यूबो ोंके पास के स्टे
द्वारा सपोटेड िेि के वलए एक स्टे द्वारा सपोटेड है,[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 393
C = 499.17943 दहन कि या फायर-बॉक्स हेतु स्टील या विशे रॉट आयरन स् हृू स् टे
C = 607.45216 नट के साथ वफट स्टील के अनुदैध्यय या हृॉस स् टे के वलए
= 330.44272 ताोंबे के स्टे के वलए
(2) जहाों बाे हुए वसरो ोंके साथ स्टे का वनमायण वकया जाता है और स्टे की बाडी का व्यास थ्रेड के
वनचले वहस्से की तुलना में छोटा होता है, अवधकतम वीकीकायय काययशील दबाि की गणना
दूसरे सूि (12/18) से की जाएगी।
(3) सकुय लर फनेस और फायर-बॉक्स के वलए सकय मफे रेंवशयल स्टे के मामले में, स्टे का व्यास 19
वममी से कम या फायर-बॉक्स प्लेट की मोटाई का दोगुना, जो भी अवधक हो, से कम नही ों
होना चावहए। पेंचदार थ्रेड के मामले में, व्यास को थ्रेड के ऊपर मापा जाएगा। फायर-बॉक्स
प्लेट में स्टे की वपच फायर-बॉक्स प्लेट की मोटाई के 14 गुना से अवधक नही ोंहोनी चावहए।
478. लोको-टाइप बॉयलरो ंके वलए फायर-बॉक्स हृाउन टे-
(1) जहाों फायर-बॉक्स हृाउन स्टे सीधे अधय-बेलनाकार बाहरी के वसोंग से जुड़ा होता है, और
फायर-बॉक्स टॉप को चैम्बर में रखा जाता है और स्टे के साथ वफट वकया जाता है जैसा वक वचि 12/94
में दशायया गया है, बाहरी के वसोंग की मोटाई कम से कम तीन सोंलग् न थ्रेड का स् थान प्रदान करने के वलए
पयायप्त होगी वजनमें से कम से कम एक स् टे में पूणय थ्रेड होना चावहए, जो स् टे की गई सतह के वलए
सामान्य नही ोंहै, लेवकन यवद प्लेट की मोटाई एक सोंलग् न पूणय थ्रेड के वलए पयायप्त नही ोंहै, तो प्लेट को
प्रबवलत वकया जाएगा।
(2) जहाों िवटयकल स्टे का उपयोग के िल फायर बॉक्स टॉप के लोड का वहस्सा सािा करने के
वलए वकया जाता है, 1370 वममी व्यास और उससे अवधक के शेल िाले बॉयलर अनुप्रस्थ स्टे के साथ
वफट वकए जाएोंगे (वचि 12/95 देखें)। वचि 12/47, 12/48 और 12/49 में दशायए अनुसार स्टे को सोंलग्न
वकया जा सकता है ।
479. लांवगट्यूवडनल बार टे-
(1) लाोंवगट्यूवडनल बार स्टे के वलए अवधकतम वीकीकायय काययशील दबाि की गणना
वनम्नवलक्तखत दो सूिो ोंमें से उपयुि एक से की जानी है:
C 1.28 2 समीकरण (12/19)
P = --- D - ----
A N
C x D 2
1
P = ---------- समीकरण (12/20)
A394 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
जहाों पर,
P = वकलोग्राम/सेमी2 (जी) में अवधकतम वीकीकायय काययशील दबाि है,
D = वममी में थ्रेड के ऊपर स्टे का व्यास है,
D = वममी में अपने सबसे छोटे वहस्से पर स्टे की बॉडी का व्यास है,
1
N = प्रवत वममी स्टे के थ्रेड की सोंख्या है,
A = िगय वममी में िेिफल है वजसे एक स्टे द्वारा सपोटय वकया गया है,
C = नीचे तावलका 12/8 में वदया गया मान है।
तावलका 12/8: लांवगट्यूवडनल बार टे पर तनाि
हृम सों. बार की तन्यता शक्ति की सीमा
C का मान (वकग्रा/सेमी2)
(वकग्रा/सेमी2)
1 551.90966
3656 – 4218
2 3937-4500 607.45216
3 4218 – 4781 655.26089
4 4500 - 5062 717.13102
(2)जहाों बार स्टे िवटयकल बॉयलरो ोंमें वफट वकए जाते हैं, िहाों 1200 वममी और उससे अवधक लेवकन 1500
वममी व्यास से कम के बॉयलरो ों में कम से कम चार बार स्टे वफट वकए जाएोंगे; 1500 वममी और उससे
अवधक लेवकन 1800 वममी व्यास से कम के बॉयलर में पाोंच बार स् टे वफट वकए जाएोंगे है; 1829 वममी और
उससे अवधक व्यास के बॉयलरो ोंमें छ: बार सट टे वफट वकए जाएोंगे।
(3)वकसी भी क्तस्थवत में, वकसी भी भाग पर स्टे का व्यास 25 वममी से कम नही ोंहोना चावहए। जहाों ज् िाइोंड
स्टे वफट हैं, िहाों लगाए गए नकल जॉइोंट की िमता कम से कम बार स्टे के बाकी वहस्सो ों की िमता के
बराबर होनी चावहए।
480. टे ट्यूब और बार टे पर लोड-
विवनयम 121 की अपेिाएों लागू होगों ी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 395
481. फ्लैट प्लेट मावजषन
(1) स् टे की ररलीफ में सपोटय की मािा के वलए शेल, फनेस या फ़्लूज, वजनसे फ़्लैट प्लेटटस जुड़ी हुई हैं,
वजम्मेदार हो सकती हैं, वनम्नवलक्तखत सूिो ोंद्वारा वनधायररत मािा से अवधक नही ोंहोगी:
वममी में मावजयन की चौड़ाई= समीकरण(12/21)
जहाों,
t वममी. में प्लेट की मोटाई है
P अवधकतम वीकीकायय काययशील दबाि वकलोग्राम/सेमी2 (जी) में है
C = 0.92008 फ्लेम के सोंपकय में आने िाली प्लेटो ोंके वलए।
C = 0.98107 उन प्लेटो ोंके वलए जो फ्लेम के सोंपकय में नही ोंहैं।
(2)जहाों प्लेटो ों को फ्लैंग वकया जाता है, मावजयन को फ्लैंवजोंग की िहृता के प्रारोंभ से, या प्लेट के बाहर से
मापी गई प्लेट की मोटाई के 3½ गुना, जो भी वनकले हुए वकनारे के करीब हो, से मापा जाएगा। जहाों फ्लैट
प्लेट को शेल या फ्लू ट्यूबो ोंसे जोड़ने के वलए फ्लैंज् ड नही ोंवकया जाता है और िेल्ड वकया जाता है जैसा वक
वचि 12/12 या 12/17 में दशायया गया है, मावजयन की चौड़ाई को शेल के अोंदर या फ्लू ट्यूब के बाहर से
मापा जाएगा, जो भी लागू हो।
(3)हालाोंवक, वकसी भी मामले में, एक िवटयकल बॉयलर के अपटेक से सपोटेड मावजयन की सीमा बनाने िाले
सकय ल का व्यास ‘ ’ वनम्नवलक्तखत सूि द्वारा प्राप्त की तुलना में अवधक नही ोंहोगा:
समीकरण(12/22)
जहाों,
A िगय वममी में अपटेक ट्यूब का हृॉस सेक्शनल िेि है,
P वकलोग्राम/सेमी2 (जी) में अवधकतम वीकीकायय काययशील दबाि है,
d वममी में अपटेक का बाहरी व्यास है।
भाग-11
482. वब्वदंग स्पेस- फनेस के सोंबोंध में विवनयम 407 के उप-विवनयम (9) के प्रािधान पर विशे ध्यान
देते हुए बॉयलर के वडजाइन के आधार पर विवनयम 483, 484 अथिा 485 में वदए गए अनुसार विवदोंग
स्पेस प्रदान वकए जाएोंगे।396 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
483.विवनयम 407 के उप-विवनयम (9) के खंड (क) के अनुसार बॉयलरो ंके वलए –
(1) फनेस कनेक्शन और ट्यूब नेस्ट के आसपास पयायप्त विवदोंग स्पेस के वलए स्टे की व्यिस्था की जाएगी
(देखें वचि 12/91 और 12/93 देखें), और अनस्टेड िेिो ोंको समान रूप से अलग करेंगे।
(2) (क) मल्ट्ी-ट्यूबलर बॉयलर के मामले में, फनेस के आगे और पीछे दोनो ों अटैचमेंट के वलए, फनेस
और ट्यूब नेस्ट के बीच या फनेस और शेल के बीच िीवदोंग स्पेस कम से कम 50 वममी या शेल के भीतरी
व्यास का 5%, जो भी बड़ा हो, अवधकतम अपेिा 100 वममी है।
(ख) फनेस और िेट-बैक रैपर प्लेटटस के बीच क्लीयरेंस पर िीवदोंग स्पेस के रूप में विचार करने की
आिश्यकता नही ोंहोगी।
(ग) ररिसय फ्लेम बॉयलर के मामले में, फनेस और ट्यूब नेस्ट के बीच सामने के छोर पर विवदोंग स्पेस 50
वममी से कम नही ों होनी चावहए और फनेस ररयर प्लेट के बाहरी कुों डलाकार िेि द्वारा बनाई गई विवदोंग
स्पेस 50 वममी या शेल के भीतरी व् यास के 5%, जो भी बड़ा हो, से कम नही ों होनी चावहए। जो वक
अवधकतम 100 वममी है।
(घ) गसेट या वलोंक स्टे और ट्यूब के वसरो ोंके बीच िीवदोंग स्पेस 100 वममी से कम नही ोंहोनी चावहए। ट्यूबो ों
और िेट-बैक रैपर प्लेटो ों के बीच की ् लीयरेंस को िीवदोंग स्पेस के स्थान के रूप में विचार करने की
आिश्यकता नही ोंहोगी।
(ड.) ट्यूबो ोंऔर शेल के बीच िीवदोंग स्पेस 40 वममी से कम नही ोंहोनी चावहए।
(च) गसेट या वलोंक स्टे और फनेस के बीच िीवदोंग स्पेस 200 वममी से कम नही ोंहोना चावहए, वसिाय इसके
वक शेल का बाहरी व्यास 1800 वममी से अवधक और फनेस की लोंबाई 6000 वममी से अवधक होने पर, िे
250 वममी से कम नही ोंहोगों े और शेल के बाहरी व् यास के 1400 वममी से कम और फनेस की लोंबाई 3000
वममी से कम होने पर िे 150 वममी से कम नही ोंहोगों े।
(छ) अन्य सभी िीवदोंग स्पेस न्यूनतम 50 वममी या शेल के भीतरी व्यास का 3%, जो भी बड़ा हो, होगों े,
अवधकतम अपेिा 100 वममी है।
(3) (क) कोवनयश और लोंकाशायर बॉयलरो ों हेतु, िीवदोंग स्पेस को पररभाव त करने िाला सकय ल वचि
12/89 में वदखाए अनुसार होगा यानी स्टे सकय ल के कें द्र और फ्लू के कें द्र के बीच की दूरी 3e+ 63 से कम
नही ोंहोगी। जहाों, ‘e’ वममी. में एोंडप्लेट की मोटाई है
नोट: लोंकाशायर बॉयलरो ोंके वलए, नीचे दी गई तावलका 12/9 में वदखाए गए अनुपात फनेस और फ्लूज के
ऊपर एोंड प्लेटो ोंके वहस्से के वलए अनुशोंवसत हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 397
तावलका 12/9: लंकाशायर बॉयलरो ंके वलए ब्ीवदंग स्पेस
एोंड प्लेट की 13 14 16 18 20 20 से अवधक
मोटाई (वममी में)
ब्ीवदंग स्पेस 255 280 305 330 330 340
(वममी में) (वचि
12/70 देखें)
(ख) यह अनुशोंसा की जाती है वक फ्लू के नीचे विवदोंग स्पेस तावलका 12/9 में वदए गए आयामो ोंका लगभग
आधा हो।
484. विवनयम 407 के उप-विवनयम (9) के खंड (घ) के अनुसार बॉयलरो ं के वलए – (1) स्टे फनेस
कनेक्शन और ट्यूब नेस्ट के आसपास विवदोंग स्पेस देंगे (वचि 12/86 से 12/93, 12/96, 12/97, 12/98,
12/99 और 12/100 देखें) और अनस्टेड िेिो ों को समान रूप से अलग करेगी। फनेस और ट्यूब नेस्ट के
बीच विवदोंग स्पेस कम से कम 50 वममी या शेल के बाहरी व्यास का 5%, जो भी बड़ा हो, लेवकन 100 वममी
से अवधक नही ोंहोनी चावहए।
(2) फनेस और शेि के बीच विवदोंग स्पेस तावलका 12/9 या 12/10 में वदए गए अनुसार होनी चावहए,
लेवकन 50 वममी से कम नही ों होनी चावहए या, बोवलोंग हूप फनेस के वलए, 75 वममी से कम नही ों होनी
चावहए, जैसा वक बोवलोंग हूप के बाहरी व्यास से मापा जाता है।
(3) एक से अवधक फनेस िाले बॉयलरो ों के वलए, फनेस के बीच विवदोंग स्पेस 120 वममी से कम नही ोंहोनी
चावहए।
(4) गसेट या वलोंक स्टे और फनेस के बीच विवदोंग स्पेस 200 वममी से कम नही ों होनी चावहए, वसिाय
वनम्नवलक्तखत के ;
शेल का बाहरी व्यास >1800 वममी 250 वममी
या फनेस की लोंबाई > 6000 वममी
शेल का बाहरी व्यास <1400 वममी 150 वममी
या फनेस की लोंबाई <3000 वममी
(5) गसेट या वलोंक स्टे और ट्यूब नेस्ट के विवदोंग स्पेस 100 वममी से कम नही ोंहोनी चावहए।398 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) जब अनफ्लैंज् ड फ्लैट एोंड प्लेटो ोंका उपयोग वकया जाता है, तो गसेट या वलोंक स्टे और फनेस के बीच
विवदोंग स्पेस को वनम्नानुसार बााया जाएगा:
200 वममी से 220 वममी. तक बााएाँ
250 वममी से 275 वममी. तक बााएाँ
150 वममी से 165 वममी. तक बााएाँ
100 वममी से 110 वममी. तक बााएाँ
(7) अन्य सभी विवदोंग स्पेस कम से कम 50 वममी या शेल के बाहरी व्यास का 3%, जो भी बड़ा हो, लेवकन
100 वममी से अवधक नही ोंहोना चावहए।
तावलका 12/10 : ट्यूब प्लेट की मोटाई 25 वममी से अवधक न होने पर फनेस और शेल के बीच
वब्वदंग स्पेस (तावलका 12/11 भी देखें)
वडजाइन बॉयलर और एोंड प्लेट के बीच विवदोंग स्पेस
लोंबाई L मी. में
बाहरी व्यास का अवधकतम वममी
प्रवतशत (नोट)
(1) (2) (3) (4)
इन्ऱटेड फ्लेट < 5.5 5 100
एोंडटस
5.5 < L < 6.0 5.5 110
6.0 < L < 6.5 6 120
फ्लेंर्ज् एोंडटस कोई भी लोंबाई 5 100
नोट: लेवकन 50 वममी से कम नही ोंया, बोवलोंग हूप फनेस के वलए 75 वममी।
(8) जब एोंड प्लेट की िास्तविक मोटाई 25 वममी से अवधक हो तो विवदोंग स्पेस को तावलका 12/10 से
बााकर तावलका 12/11 के अनुसार बााया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 399
तावलका 12/11: एंड प्लेट की मोटाई 25 वममी. से अवधक होने पर फनेस और शेल के बीच वब्वदंग
स्पेस
भट्टी की लोंबाई विवदोंग स्पेस
मीटर में d का % वममी से अवधक न्यूनतम वममी
होने की
आिश् यकता नही ों
(1) (2) (3) (4) (5)
< 5.5 6.5 130 65
5.5 < L < 6.0 7.0 140 70
6.0 < L < 6.5 8.0 150 75
485. विवनयम 483 और 484 के अंतगषत नही ंआने िाले बॉयलरो ंके वलए – (1) फनेस कनेक्शन और
ट्यूब नेस्ट के आसपास पयायप्त वबयररोंग स्पेस देने के वलए गसेट स्टे की व्यिस्था की जाएगी (वचि 12/86 से
12/93, 12/96 और 12/97 से 12/100 देखें)। तावलका 12/12 में वदखाए गए अनुपातो ोंकी वसफाररश
फनेस और फ्ल्ल्ूज के ऊपर की एोंड प्लेटो ोंके वहस्से के वलए की जाती है।
तावलका 12/12: विवदोंग स्पेस
हृम सों. वममी में एोंड प्लेट की लोंबाई पररमाप ‘L’ वममी
(1) (2) (3)
1. < 13 255
2. > 13 < 14 280
3. > 14 < 16 305
4. > 16 < 20 330
5. > 20 340400 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) फ़्लूज के नीचे विवदोंग स्पेस तावलका 12/12 में वदए गए आयामो ों का लगभग आधा
होना चावहए।
(3) ट्यूब नेस्ट के ऊपर गसेट स्टे के वलए, जैसा वक आोंतररक फनेस के वबना मल्ट्ी-
ट्यूबलर िेस्ट हीट बॉयलर में वफट वकया गया है, आसन्न ट्यूबो ों की कें द्र रेखा से गसेट
कोण या प्लेट के टो तक 20.3 वममी की विवदोंग स्पेस को बनाए रखा जा सकता है।
मल्ट्ी-ट्यूबलर डराई बैक बॉयलरो ों की नीचे बैक एोंड स् टे के वलए, 152 वममी की एक
विवदोंग स्पेस को बनाए रखा जा सकता है, जहाों विवनयम 407 के अनुसार फ्ल्ल्ूज का
वनमायण वकया जाता है।
(4) जहाों एक साथ िेल्ड वकए गए नालीदार खोंडो ोंके फ्ल्ल्ूज का वनमायण वकया जाता है, िहाों
114 वममी की विवदोंग स्पेस को बनाए रखा जा सकता है।
486. गसेट वलंक, ब्ेस और इसी तरह के टे- (1) िेल्डेड लोंकाशायर, कोवनयश और बेलनाकार िैवतज
बहु-ट्यूबलर प्रकार के बॉयलरो ोंके वलए, सभी िेल्डेड गसेटटस स्टे का उपयोग नही ोंवकया जाएगा। लचीलेपन
को सुवनवश्चत करने के वलए, वलोंक स्टे, बार स्टे, िेस स्टे, ऑल-िेल्डेड टाइप के अलािा अन्य का उपयोग
वकया जाएगा। हालाोंवक, सभी िेल्डेड गसेट स्टे का उपयोग बेलनाकार िैवतज िेस् ट हीट और बेलनाकार
िवटयकल मल् टी-ट्यूबलर बॉयलरो ोंमें वकया जा सकता है।
(2) िेल्डेड लोंकाशायर कोवनयश और बेलनाकार िैवतज मल् टी-ट्यूबलर प्रकार के बॉयलरो ों के वलए िेल्डेड
गसेट स्टे और िेस का उपयोग वकया जा सकता है, बशते वक उनके अटेचमेंट की विवध वनरीिण
प्रावधकारी द्वारा अनुमोवदत हो।
(3) बॉयलर के फ्लैट एोंड प्लेट को सपोटय करने िाले प्रत्येक गसेट या वलोंक स्टे को उस िेि पर दबाि के
कारण पूरे भार को ले जाने के वलए वडजाइन वकया जाएगा। वकसी एक स्टे द्वारा सपोटय िेिो ोंको सपोटय वकए
जाने िाले कु ल िेि पर विचार करके प्राप्त वकया जाएगा जो फ्लैट प्लेट मावजयन की सीमा के भीतर है और
इस िेि को स्टे के बीच खीचों ी गई सीमा रेखाओ ों से विभावजत करता है। ये सीमा रेखाएों विचाराधीन िेि में
सपोटय के आसन्न वबोंदुओ ों से समान दूरी पर क्तस्थत सभी वबोंदुओ ों पर होगों ी। विकोणीय गसेट प्लेट या विकणय
वलोंक स्टे पर प्रभािी समान रूप से वितररत भार को L/L1 से गुणा करके सपोटेड (जैसा ऊपर वनधायररत
वकया गया है) एोंड प्लेट के वहस्से पर लोंबित भार के बराबर माना जाएगा (आोंकड़े 12/101, 12/102 और
12/103 देखें)।
(4) (क) गसेट प्लेटटस इस तरह से आनुपावतक होनी चावहए वक कोण "V" (वचि 12/101 और 12/102
देखें), 60 वडग्री से कम न हो।
(ख) गसेट प्लेट की मोटाई ऐसी होगी वक प्लेट में स्टरैस समान रूप से वितररत भार (जैसा वक ऊपर
पररभाव त वकया गया है) का िहन करने के वलए लाइन XX या YY (वचि 12/101 और 12/102) पर सबसे
छोटे हृॉस-सेक्शन पर गणना की जाती है, उपयोग की गई प्लेट के न्यूनतम तन्यता तनाि के एक-सातिें[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 401
वहस्से से अवधक नही ोंहोना चावहए, लेवकन वकसी भी क्तस्थवत में मोटाई न्यूनतम 11 वममी प्लेट के साथ। शेल
की मोटाई के सातिें-आठिें वहस्से से कम नही ोंहोनी चावहए।
(ग) जहाों ऑल-िेल्डेड गसेट स्टे का उपयोग वकया जाता है, िहाों एक सख्त प्लेट को गसेट के टो पर िेल्ड
वकया जाना चावहए, जहाों इसे अोंत प्लेट में सुरवित वकया जाता है, जहाों अवधकतम स्टरैस होता है, (वचि
12/101 देखें)।
(5) वलोंक स्टे की व्यिस्था इस प्रकार की जाएगी वक कोण "V" (वचि 12/ 103) 60 वडग्री से कम न हो और
आयाम ऐसा हो वक इसके सबसे कमजोर वहस्से पर स्टरैस इस्तेमाल की गई प्लेट के न्यूनतम तन्यता तनाि
का एक-सातिें वहस्से से अवधक न हो।
(6) एोंकर प्लेट, एोंगल और वलोंक वपन की सबसे कमजोर खोंड पर पररकक्तित िमता इस प्रकार होगी:
(क) वलोंक वपनो ों को इस प्रकार वडजाइन वकया जाएगा वक शीयर स्टरेस 562 वकग्रा/सेमी2 से अवधक न हो,
डबल शीयर में वपनो ोंकी शक्ति को एकल शीयर में वपनो ोंकी स्टरेंथ का 1.875 गुना माना जाए।
(ख) एोंकर प्लेट या एोंगल इस तरह से वडजाइन वकए जाएोंगे वक पररकवलत तनाि उपयोग की गई सामग्री के
न्यूनतम तन्यता तनाि के एक-सातिें वहस्से से अवधक न हो, लेवकन वकसी भी मामले में मोटाई शेल प् लेट
की मोटाई के सात-आठिें से कम नही ोंहो और न्यूनतम 12.7 वममी हो, न ही एोंड प्लेट से जुड़े वहस्से की
लोंबाई एोंड से शेल फ्लैट मावजयन की रेखाओ ों और ट्यूब नेस्ट के फ्लू के चारो ोंओर विवदोंग स्पेस रेखा के बीच
की दूरी से कम हो।
7. (क) जहाों गसेट प्लेटटस, एोंकर प्लेटटस या एोंगि को शेल और/या एोंड प्लेटटस से िेल्ड वकया जाता है,
अटैचमेंट प्रत्येक तरफ वनरोंतर वफलेट िेल्डटस के माध्यम से या बट-िेल्डटस द्वारा वनम्नवलक्तखत पैराग्राफ और
पररवशष्ट स-ञ के वििरण l, m, n, या p. के अनुसार तैयार वकए जाएोंगे।
(ख) िेल्ड इस तरह के आयाम के होगों े वक प्रभािी थ्रोट की मोटाई से गुणा वकए गए िेल्ड की प्रभािी लोंबाई
के बराबर िेि पर गणना वकया गया तनाि तावलका 12/13 में उपयुि िेल्ड कारक द्वारा गुणा की गई मूल
धातु के वलए अनुमत सीमा से अवधक नही ोंहोगी।
(ग) एक िेल्ड की प्रभािी लोंबाई को िेल्ड की उस लोंबाई के रूप में वलया जाएगा जो पूरे वनवदयष्ट स आकार की
हो।
(घ) ओपन-एोंडेड वफलेट िेल्ड के वलए प्रभािी लोंबाई कु ल लोंबाई होगी जो िेल्ड आकार के दोगुनी से कम
होगी।
(ड.) स्टरैस गणना के प्रयोजन के वलए, बट िेल्ड की प्रभािी थ्रोट की मोटाई को गसेट या वकसी अन्य प्लेट
की मोटाई के रूप में वलया जाएगा और वफलेट िेल्ड की प्रभािी थ्रोट की मोटाई को वफलेट आकार के 0.7
के रूप में वलया जाएगा। यौवगक िेल्ड के वलए प्रभािी मोटाई घटक भागो ोंके योग के बराबर होगी।402 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका 12/13: िेल्ड अटैचमेंट
िेल्ड का रूप िेल्ड कारक
स्टरैस मुि नही ों स्टरैस मुि
(1) (2) (3)
वसोंगल J या बेिल सील न की गयी 0.35 0.45
बट-िेल्ड (अवतरोंवजत सील की गयी 0.60 0.70
वफलेट के साथ या
इसके वबना)
डबल J या बेिल बट-िेल्ड (अवतरोंवजत 0.60 0.70
वफ़ललेटटस के साथ या इसके वबना)
डबल वफलेट िेल्ड 0.55 0.65
भाग-12
बाहरी दबाि के अधीन फनेस, फनेस घटक, िेट-बैक ररिसषल चैंबर और बेलनाकार रूप के फायर
बॉक्स
487. भवट्टयां:
(1) फनेस का औसत व्यास 1800 वममी से अवधक नही ोंहोना चावहए।
(2) नोटेशन वनम्नानुसार है–
b = फनेस कोरुगेशन का वपच है (वममी में);
c = कोरोजन एलाउोंस है = 0.75 वममी;
d = फनेस का औसत व्यास है (वममी में) (नोट 1 देखें);
d = फनेस का अवधकतम माध्य व्यास (वममी में) है;
max
d = फनेस का न्यूनतम माध्य व्यास (वममी में) है;
min
e = फनेस प्लेट की मोटाई (वममी में) है;
E= वडजाइन तापमान पर योंग का इलाक्तस्टवसटी गुणाोंक (वकग्रा/सेमी2 में) है।
E = वनवदयष्ट स न्यूनतम उच् च तापमान यील् ड स्टरैस या वडजाइन तापमान पर 0.2% प्रूफ स्टरैस
t
(वकलोग्राम / सेमी 2 में) जैसा वक सामग्री के देश के गिवनिंग कोड में उपलब्ध है;
F= नालीदार फनेस की दीिार के अनुदैध्यय खोंड का हृॉस-से् शनल िेि है, लोंबाई b और मोटाई
(e-c) (वममी2 में) *वचि 12/119 (वचि-ए से वचि-जी)+ देखें;
I = अपने तटस्थ अि के बारे में एक पूणय कोरुगेशन िेि का दूसरा मोमेंट है, कोरोजन एलाउोंस
(वममी4 में) को छोड़कर;
I = अपने तटस्थ अि के बारे में प् लेन क्तस्टफ़नर खोंड (आोंकड़े 12/29 और 12/30) के िेि का
s
दूसरा मोमेंट है, वजसमें क्तस्टफ़नर के प्रत्येक साइड 0.55√ (de) की फनेस की लोंबाई शावमल है
(वममी4 में) (नोट 2 देखें)
L = सपोटय के दो प्रभािी वबोंदुओ ोंके कें द्र के बीच की दूरी है (वममी में) (नोट 3 देखें);[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 403
P = अवधकतम वीकीकायय काययशील दबाि है (वकलोग्राम/सेमी2 में)
S = सुरिा का कारक है:
1
= 2.5 श्रेणी I और श्रेणी II बॉयलर में फनेस के वलए
= 3.5 श्रेणी III के बॉयलरो ोंमें फनेस के वलए
= 2.0 फनेस और व्रैपर प्लेटो ोंके वलए जो फ्लेम के सोंपकय में नही ोंहैं;
S = सुरिा का कारक है:
2
= 3.0 श्रेणी I और श्रेणी II बॉयलर के वलए
= 3.9 श्रेणी III के बॉयलरो ोंके वलए
u= गोलाई का प्रवतशत है वजसे प् लेन फनेस के वलए 1.5 और नालीदार फनेस के वलए 1.0 के
रूप में वलया जाना है;
W = कोरुगेशन की गहराई (वममी में) है।
नोट स:
1. नालीदार फनेस के वलए, माध्य व्यास अोंदर के व्यास के बराबर है और वचि 12/119 में सोंदवभयत
कोरुगेशन की पूरी गहराई है जो अोंदर के व्यास +e+W के बराबर है।
2. l की गणना करते समय, के िल फनेस गैस पि पर सोंिारण भत्ता को ध्यान में रखना आिश्यक है।
s
3. वचि 12/29 और 12/30 बॉयलर और ररिसयल चैंबर एोंड प्लेटटस का अनुपालन करने िाले क्तस्टफ़नर को
सपोटय के प्रभािी वबोंदु माना जाता है।
4. फनेस का वडजाइन तापमान = Cs + 4e +15 (सोंतृक्तप्त तापमान प्लस फनेस की मोटाई का चार गुणा
प्लस 15)।
(3) वडजाइन तापमान पर योंग के मापाोंक का मूल्ाोंकन। ‘ ’ का मान वनम्न तावलका से प्राप्त वकया जाएगा
(यवद आिश्यक हो, तो रैक्तखक प्रिेप द्वारा):
तावलका 12/14
हृम वडग्री सेक्तियस में वडजाइन तापमान E का मान Kg/cm2 x 103में
सोंख् या
(1) (2) (3)
1 250 1987
2 300 1947
3 350 1896
4 400 1845
5 450 1814
488. सादी भवट्टयां
(1) प् लेन फनेस का अवधकतम वीकीकायय काययशील दबाि समीकरण 12/23 और 12/24 का
उपयोग करके प्राप्त वकए गए वनम्न से कम होगा, लेवकन मोटाई 7 वममी से कम और 22 वममी से
अवधक नही ोंहोनी चावहए:404 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
समीकरण (12/23)
समीकरण (12/24)
(2) समीकरण 12/23 और 12/24 को हृमशः समीकरण 12/25 और 12/26 का उपयोग करके
वनम् नानुसार मोटाई के रूप में व्यि वकया जा सकता है और इनमें से वजसमें अवधक मोटाई
होगी उसका उपयोग वकया जाएगा।
समीकरण ( 12/25)
जहाों,
समीकरण (12/26)
(3) यवद भट्ठी/दहन कि में ट्यूब रेवडयल रूप से हैं, तो फनेस के उस वहस्से की मोटाई को
वलगामेंट दिता के मूल् से बााया जाना है।
489. फनेस घटक - फनेस घटको ोंकी मोटाई, उदाहरण के वलए एश डरॉप-आउट ट्यूब और ईोंधन इनलेट
कनेक्शन की गणना विवनयम 488 के अनुसार 10 वममी की न्यूनतम मोटाई और 22 वममी की अवधकतम
मोटाई के साथ की जाएगी।
490. नालीदार भवट्टयां - नालीदार फनेस का अवधकतम वीकीकायय काययशील दबाि समीकरण 12/27 का
उपयोग करके वनधायररत वकया जाएगा, लेवकन मोटाई 10 वममी से कम और 22 वममी से अवधक नही ोंहोगी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 405
अन्य आकृ वतयो ोंके वलए कु छ कोरुगेशन हेतु ‘I’ और ‘F’ का पररकवलत मान वचि 12/119 में वदया गया है,
और आकारो ोंके वलए गणना बुवनयादी वसद्ाोंतो ोंसे की जानी चावहए।
समीकरण(12/27)
491. टॉलरेंस और अलाउंस – दीिार की पररकवलत मोटाई में जोंग और वियर के वलए 0.75 वममी का
एक वनवश्चत अलाउोंस होता है। नालीदार फनेस के वलए, दीिार की पररकवलत मोटाई तैयार फनेस की
न्यूनतम मोटाई होगी। प् लेन फनेस और ररिसयल चैम् बसय के वलए, प्लेट की मोटाई पर वकसी भी माइनस
टॉलरेंस के वलए अलाउोंस वदया जाएगा।
492. आउट-ऑफ-राउंडनेस: (1) आउट-ऑफ-राउोंडनेस का प्रवतशत वनम् नानुसार है:
200 (d - d
max min)
u = --------------------- समीकरण (12/28)
d d
max + min
(2) इसे नालीदार फनेस के वलए u = 1.0 और प्ल ेन फनेस के वलए u = 1.5 के रूप में गणना में वलया
जाएगा।
493. ल्पटणनर:
(1) क्तस्टफ़नर में इनवशयया का सेके य ड मोमेय ट होगा जो वनम्नवलक्तखत समीकरण द्वारा वदए गए
से कम नही ोंहोगा:
Pd3 L
Is = ---------------- समीकरण (12/29)
1.35 x 107
(2) (क) यवद क्तस्टफ़नर बार या प्लेट के खोंडो ोंमें बनाए जाते हैं, तो एबवटोंग एोंड तैयार वकए जाने
चावहए तावक यह सुवनवश्चत हो सके वक पूणय प्रिेश िाले िेल्ड वकए गए हैं।
(ख) क्तस्टफवनोंग ररोंग की मोटाई आिश्यकतानुसार न्यूनतम रखी जाएगी (आयामो ों को
सीवमत रखने के वलए वचि 12/29 और 12/30 देखें) ।406 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) बॉवलोंग हूप्स को सपोटय के प्रभािी वबोंदु के रूप में माना जाता है। बावलोंग हूप कें द्रो ों की न्यूनतम वपच
500 वममी से कम नही ोंहोनी चावहए। यवद बॉवलोंग हूप्स का उपयोग वकया जाता है, तो फनेस की मोटाई की
गणना विवनयम 488 से की जाएगी। बॉवलोंग हूप्स के आयाम वचि 12/120 (वचि ए, बी और सी) के अनुसार
होगों े और इन वचिो ोंमें दी गई तावलकाओ ों से वनधायररत िेि का सेके ण् ड मोमेंट उप-विवनयम (i) द्वारा अपेवित
से कम नही ोंहोगा।
(4) यवद नालीदार भवट्टयाों कई क्तस्टफ़नर से सुसक्तित हैं, उदाहरण के वलए समीकरण 12/27 का उपयोग
करते समय प्रत्येक कोरुगेशन पर या प्रत्येक दूसरे कोरुगेशन पर, हृॉस-से् शनल िेि और क्तस्टफ़नर के
दूसरे मोमेंट के िेि को भी ध्यान में रखा जाएगा। गणना के वलए फनेस की मोटाई के चार गुना से अवधक
की ऊों चाई का उपयोग नही ोंवकया जाएगा।
494. िृत्तीय ररिसषल चैंबर -
(1) (क) िैवतज मल् टी-ट्यूबलर बॉयलरो ों के बेलनाकार ररिसयल चैंबर की रैपर प्लेटो ों की मोटाई की
गणना विवनयम 488 में वदए गए समीकरणो ों के अनुसार की जाएगी। मोटाई 35 वममी से
अवधक नही ोंहोनी चावहए और 10 वममी से कम नही ोंहोनी चावहए।
(ख) तथावप, ररिसयल चैंबर रैपर प्लेटो ोंके वलए वडजाइन तापमान वनम्नवलक्तखत समीकरणो ोंके अनुसार
वनधायररत वकया जाएगा: -
t = (t + 2e ) या (t + 50) जो भी अवधक हो।
s 2 s
जहााँ, t = वडजाइन तापमान (वडग्री सेंटीग्रेड में)
t = भाप या गमय पानी के बॉयलर दोनो ोंके वलए अवधकतम वीकीकायय काययशील दबाि पर पानी का सोंतृप्त
s
तापमान (वडग्री सेंटीग्रेड में)।
e = नोवमनल प्लेट मोटाई (वममी में)।
2
(2) (क) एक्सेस ट्यूबो ोंकी मोटाई की गणना 10 वममी की न्यूनतम मोटाई के साथ विवनयम 488 के अनुसार
की जाएगी।
(ख) हालााँवक, एक्सेस ट्यूबो ोंके वलए वडजाइन तापमान वनम्नवलक्तखत समीकरणो ोंके अनुसार वनधायररत वकया
जाएगा: -
t = (t + 2e ) या
s 2
(t + 50) जो भी अवधक हो।
s
जहााँ, t = वडजाइन तापमान (वडग्री सेंटीग्रेड में)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 407
t = भाप या गमय पानी के बॉयलर दोनो ोंके वलए अवधकतम वीकीकायय कायय दबाि पर पानी का सोंतृक्तप्त
s
तापमान (वडग्री सेंटीग्रेड में)।
e = नोवमनल प्लेट मोटाई (वममी में)।
2
495. िवटषकल बॉयलरो ंके प् लेन फनेस- (1) िवटयकल बॉयलरो ोंके प्लेन फनेस का अवधकतम वीकीकायय
काययशील दबाि समीकरणो ों(12/23) और (12/24) द्वारा प्राप्त दो मानो ोंसे कम होगा।
जहाों पर,
D = वममी में, फायर-बॉक्स का बाहरी व्यास। जहाों फायरबॉक्स को पतला वकया जाता है, जहाों वलया गया
व्यास ऊपर और नीचे का औसत होगा, जहाों फ्लैंज या ररोंग से पयायप्त सपोटय वमलता है,
L = फ्लैंज किेचर के आरोंभ से या फाउोंडेशन कनेक्शन, या स्क्रू स्टे, जो विवनयम 416 और विवनयम 477
के उप- विवनयम (3), जो भी लागू हो, का अनुपालन करता हो, से मापा गया पयायप्त सपोट के वबोंदुओ ों के
बीच वममी में फ़ायरबॉक्स की लोंबाई है।
(2) मोटाई 22 वममी से अवधक नही ोंहोनी चावहए और 10 वममी से कम नही ोंहोनी चावहए।
496. िवटषकल बॉयलरो ंके नालीदार फायरबॉक्स
(1) 'सेंवटनल' मानक मोटर िैगन बॉयलरो ों के सेमी-स् पायरली नालीदार फायरबॉक्स के वलए
अवधकतम वीकीकायय काययशील दबाि वनम्नवलक्तखत सूि द्वारा वनधायररत वकया जाएगा:
समीकरण (12/30)
जहाों,
P अवधकतम वीकीकायय काययशील दबाि वकलोग्राम / सेमी2 (जी) में है
t वममी. में फायरबॉक्स प्लेट की मोटाई है
D वममी में, फ्लैंज की िहृता के आरोंभ में प्रत्येक छोर पर सादे भाग पर मापा गया फायरबॉक्स के बाहरी
व्यास का माध्य है
C = 27.41972
(2) कोई भी नालीदार फनेस 10 वममी से कम मोटाई की नही ोंहोनी चावहए।408 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
497. िवटषकल बॉयलरो ंके हेवमफ े ररकल फनेस-
(1) जब फनेस हेवमस् फे ररकल रूप में होती है और उत्तल पि पर दबाि के अधीन होती हैं और वकसी भी
प्रकार के सपोटय के वबना होती है, तो अवधकतम वीकीकायय काययशील दबाि वनम्न सूि द्वारा मापा जाएगा:
समीकरण (12/31)
जहाों
P अवधकतम वीकीकायय काययशील दबाि वकलोग्राम/सेमी2 (जी) में है
t वममी में शी य प्लेट की मोटाई है।
R वममी में फनेस की िहृता की बाहरी विज्या है।
(2) इन फनेसेज की मोटाई वकसी भी क्तस्थवत में 22 वममी से अवधक नही ोंहोगी।
भाग-13
498. िवटषकल बॉयलर फनेस की नीिं -
जब िवटयकल बॉयलरो ोंके फायरबॉक्सो ोंकी गोलाकार भवट्टयाों अपटेक ट्यूब, स्भोक ट्यूब या बोल्ट् स्टे द्वारा
शेल हृाउन से नही ोंजुड़ी होती हैं और फायरबॉक्स पर पूरा भार लोंबित रूप से फायरबॉक्स के वनचले
वहस्से द्वारा िहन वकया जाता है जहाों यह शेल से जुड़ा होता है, तो उस भाग के वलए अवधकतम वीकीकायय
काययशील दबाि, यवद फायरबॉक्स को शेल से जोड़ने के वलए बाहर वनकाला जाता है या यवद कोई ओजी
ररोंग वफट की जाती है, तो वनम्न सूि द्वारा प्राप्त की गई मािा से अवधक नही ोंहोगी:
समीकरण (12/32)
जहाों,
P अवधकतम वीकीकायय काययशील दबाि वकलोग्राम/सेमी2 (जी) में है
t वममी में जॉगल्ड फायरबॉक्स प्लेट या ओजी ररोंग की मोटाई है।
D वममी में बॉयलर शेल का आोंतररक व्यास है।
D जॉगल्ड फ़ायरबॉक्स के बाहरी व्यास, वममी में, जॉगल भाग के ऊपर िहृता के आरोंभ में या
1
फायरबॉक्स के बाहरी व्यास में होता है जहााँ यह ओजी ररोंग से जुड़ता है।
C = ओजी ररोंगो ोंके वलए C = 9.84297 (वचि 12/34 और 12/35 देखें)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 409
C = 7.03070 जहाों 'यू' ररोंग सेक्शन का उपयोग वकया जाता है (वचि 12/36 देखें)।
499. लोकोटाइप बॉयलर फायरबॉक्स का फाउण् डेशन
(1) जहाों लोकोटाइप बॉयलरो ों में फायरबॉक्स रुफ बाहरी के वसोंग हृाउन या के वसोंग के गडयरो ों पर
सीधे क्तस्थत नही ों रहती है या यवद क्तलोंग द्वारा के वसोंग से जुड़ा नही ों है, तो भागो ों के वलए
अवधकतम वीकीकायय काययशील दबाि, यवद प्लेटो ों को के वसोंग से वमलाने के वलए बाहर वनकाला
जाता है या यवद एक ओजी ररोंग वफट की गई है, तो वनम्न सूि द्वारा प्राप्त दबाि से अवधक नही ों
होनी चावहए:
(t – 1) x (L + W)
P = 70 ---------------------- समीकरण (12/33)
L + W (W – W )
1
जहाों, P = पाउोंड प्रवत िगय इोंच में अवधकतम वीकीकायय काययशील दबाि है,
t = एक इोंच के तीस सेकों ड में फायरहोल प्लेट (जो भी कम हो) या ओजी ररोंग के जॉगलेड फायरबॉक्स
साइड प्लेटटस की मोटाई है,
L = फायरबॉक्स के वसोंग की लोंबाई इोंच में है, वजसे फाउोंडेशन सीम पर फ्रों ट एोंड प्लेट और सैडल प्लेट के
िाटर साइड के बीच मापा जाता है,
W= फाउण् डेशन सीम पर के वसोंग साइड प्लेटटस के उस िाटर साइड के बीच मापा गया इोंच में चौड़ाई
िाला फायरबॉक्स के वसोंग है,
W = फायरबॉक्स की चौड़ाई इोंच में होती है, वजसे फायरबॉक्स साइड प्लेटटस के िाटर साइड के बीच
1
जॉगल वकए गए वहस्से के ऊपर िहृता के प्रारोंभ में मापा जाता है, जहाों यह ओजी ररोंग से जुड़ता है।
(2) जहाों फायरबॉक्स रूफ की के िल एक तुलनात्मक रूप से सोंकीणय क्तस्टरप सीधे के वसोंग हृाउन
पर वटकी हुई है, िहाों रहने िाले िेि को फॉमूयला की वनचली पोंक्ति में ‘L x W’ द्वारा दशायए गए
िेि से घटाया जाएगा:
(L x W – A) (W – W ) और इसी प्रकार समीकरण (12/33) का उपयोग भागो ोंके वलए काययशील दबाि
1
को वनधायररत करने में वकया जाता है। "A" के वसोंग हृाउन द्वारा सपोटेड रूफ के वहस्से के िगय इोंच िेि में
है।
500. िवटषकल बॉयलरो ंका अपटेक
(1) िवटयकल बॉयलरो ों के अपटेक ट्यूबो ों के वलए अवधकतम वीकीकायय काययशील दबाि वनम्नवलक्तखत
सूि द्वारा वनधायररत वकया जाएगा:410 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(i) जब एक आोंतररक लाइनर वफट नही ोंहोता है:
समीकरण (12/34)
(ii) जब एक आोंतररक लाइनर को य यून जल स्तर से नीचे ए् सटेंड कर वफट वकया जाता है:
समीकरण (12/35)
जहाों,
P अवधकतम वीकीकायय काययशील दबाि वकलोग्राम/सेमी2 (जी) में है
t वममी में, अपटेक की मोटाई है।
D वममी में बाहरी व्यास है।
L वममी में अपटेक की लोंबाई है, वजसे पररवधगत सीमो ोंके बीच मापा जाता है।
(2) वकसी भी क्तस्थवत में, अपटेक ट्यूब की मोटाई 10 वममी से कम नही ोंहोनी चावहए।
501. हृॉस ट्यूब
(1) हृॉस ट्यूब का आोंतररक व्यास 305 वममी से अवधक नही ोंहोना चावहए। ट्यून के अवधकतम वीकीकायय
काययशील दबाि वनम्न सूि द्वारा वनधायररत वकया जाएगा:
समीकरण (12/36)
जहाों,
t = वममी में हृॉस ट्यूब की मोटाई है,
D = वममी में हृॉस ट्यूब की आोंतररक व्यास है।
(2) वकसी भी क्तस्थवत में, हृॉस ट्यूब की मोटाई 8 वममी से कम नही ोंहोनी चावहए।
502. शेल से िेल्ड वकए पैड स या फ्लैंग्ड माउंवटंग्स का अटैचमेंट-[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 411
बाहरी पररधीय वफलेट िेल्ड का आकार वजसके द्वारा गोलाकार पैड शेल प्लेटो ोंसे जुड़े होते हैं, समीकरण
(12/37) द्वारा वनधायररत वकए जाएोंगे, लेवकन वकसी भी मामले में आोंतररक िेल्ड से कम या तावलका 12/3 में
वनवदयष्ट स न्यूनतम प्लेट मोटाई से कम नही ोंहोगों े:
2A – D L
1 1
L = ------------- समीकरण (12/37)
o
D
जहाों,
L वममी में, पैड की बाहरी पररवध के चारो ोंओर वफलेट िेल्ड का आकार है,
0
L वममी में, पैड की भीतरी पररवध के चारो ोंओर िेल्ड वफलेट का आकार है,
1
A शेल में ओपवनोंग का हृॉस-से् शनल िेि है (िगय वममी में न्यूनतम मोटाई के आधार पर,
विवनयम 463 देखें),
D वममी में, पैड का बाहरी व्यास है,
D वममी में, पैड का भीतरी व्यास है,
1
503. हाइडरोवलक टेट:
(1) (क) प्रत्येक श्रेणी I बॉयलर, सभी िेक्तल्डोंग और / या मरम्मत के पूरा होने पर और हीट-टरीटमेंट के बाद,
वकसी भी कमजोरी या दो के सोंके त के वबना 1.5 गुना वडजाइन दबाि के हाइडरोवलक परीिण के अधीन
होगा। .
(ख) प्रत्येक श्रेणी II और श्रेणी III बॉयलसय को वडजाइन प्रेशर के दोगुने प्रेशर के वलए टेस्ट वकया
जाएगा।
(2) (क) परीिण वनरीिण प्रावधकारी या सिम व्यक्ति द्वारा देखा जाएगा।
(ख) परीिण का दबाि कम से कम 30 वमनट की अिवध के वलए बनाए रखा जाएगा।
(ग) सुरिा के वहत में यह महत्वपूणय है वक बॉयलर को ठीक से हिादार वकया जाए, तावक परीिण
दबाि लागू होने से पहले एयर पाके टटस के बनने को रोका जा सके ।
नोट स:1. यह अनुशोंसा की जाती है वक हाइडरोवलक परीिण के दौरान पानी का तापमान 7 वडग्री
सेक्तियस से कम नही ोंहोना चावहए।412 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
2. आगे यह अनुशोंसा की जाती है वक बायलर का ठीक से परीिण करने से पहले, दबाि को
वडजाइन दबाि से कम से कम 1.1 गुना और हाइडरोवलक परीिण दबाि के 0.9 गुना से अवधक नही ोंवकया
जाना चावहए।
3. हाइडरोवलक परीिण के पूरा होने पर, दबाि धीरे-धीरे ररलीज वकया जाएगा।
4. विवभन्न दबाि भागो ोंके वडफ्ले् शन की सािधानीपूियक जाोंच की जाएगी और दबाि को ररलीज
करने के बाद कोई स्थायी सेट नही ोंहोगा।
(3) यवद हाइडरोवलक दबाि परीिण के दौरान या बाद में कोई आिश्यक मरम्मत पाई जाती है, तो बॉयलर
को मरम्मत के पूरा होने के बाद वफर से ऊपर वनवदयष्ट स दबाि परीिण के अधीन वकया जाएगा और वकसी
भी हीट टरीटमेंट के बाद मरम्मत वकए गए िेल्ड जाइोंट को विवनयम 453 के अनुसार हीट टरीटमेंट की
आिश्यकता होती है ।
नोट: सिम व्यक्ति/वनरीिण प्रावधकारी के अ युक्तियो ोंऔर वटप्पवणयो ोंको वनमायता के कागजात के साथ
दाक्तखल करने के वलए दजय वकया जाएगा।
504. सुरिा िाल्व-
विवनयम 192 से 219 के अनुपालन में बायलर को वनम्नवलक्तखत पररितयन के साथ सुरिा िाल्व प्रदान वकए
जाने चावहए:-
(i) सुरिा िाल्वो ों को कम से कम 2.5% नीचे के दबाि पर रीसेट वकया जाना चावहए, लेवकन
सुरिा िाल्व सेट दबाि से 5% से अवधक नही ोंहोना चावहए।
(ii) 32 वममी से कम की बॉडी सीट िाले और 24 बार गेज या उससे कम के वनधायररत दबाि
िाले िाल्वो ोंके वलए 5% की सीमा बााकर 10% कर दी गई है।
एंड प्ल ेट में हृॉस बीम् स
वचि 12/2
वचि 12/1[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 413
गॉर्ज ड आऊट वबफोर एप्ल ाइंग बेल् ट फ्रॉम सेकं ड साइड
वचत्र 12/3
वचत्र 12/4
वचत्र 12/5 वचत्र 12/6
वचत्र 12/7
वचत्र 12/8: शेल से अवधक मोटाई के फ्लैंर्जड
एंड प्ल ेट स वथ कर
सभी पररमाप वममी में हैं।414 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 12/10: फ्लैंर्जड फ्लैट एंड प्ल ेट स
वचत्र 12/9: शेल से अवधक मोटाई के फ्लैंर्जड एंड
प् लेट स
वचि 12/11: फ्लैंर्जड फ्लैट एंड प्ल ेट स टू शेल वचत्र 12/12: फ्लैट एंड
(एंड से अवधक मोटाई के शेल)
वचत्र 12/14: एंड प्ल ेट स से फ्लूज़ का
अटैचमेंट-
वचत्र 12/13
(वडशेड या फ्लैट)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 415
सभी पररमाप वममी में हैं।
वचत्र 12/16: एंड प्ल ेट से फ्लू कनेश न
वचत्र 12/15
(वडशेस या फ्लैट)
वचत्र 12/17: एंड प्ल ेट से फ्लू कनेश न
(वडशेस या फ्लैट)
वचत्र 12/18
वचत्र 12/19
वचत्र 12/20416 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 12/22
वचत्र 12/21
सभी पररमाप वममी में हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 417418 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 12/24: ररिसष फायर बॉयलर
वचत्र 12/25: डराई बैक बॉयलर
वचत्र 12/26: िेट बैक बॉयलर
वचत्र 12/27: सेमी-िेट बैक बॉयलर
वचत्र 12/28: सेमी-िेट बैक बॉयलर
सभी पररमाप वममी में हैं।
वचत्र 12/29: प् लेन बार[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 419
वचत्र 12/30: हॉररजॉ् टल फ्लूज हेतू बल् ि बार
वचत्र 12/31:बॉवलंग हूप
ल्पट फनर
वचत्र 12/33: वडटेल फ्लू जॉइंट
वचत्र 12/32: बॉवलंग हूप420 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 12/34
वचत्र 12/35
सभी पररमाप वममी में हैं।
वचत्र 12/37: फाउंडेशन ररंग् स
वचत्र 12/36[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 421
वचत्र 12/39: फाउंडेशन ररंग् स
वचत्र 12/38: फाउंडेशन ररंग् स
वचत्र 12/40: फायरहोल माउथपीस
वचत्र 12/41: फायरहोल माउथपीस
सभी पररमाप वममी में हैं।422 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 12/42: हृॉस ट्यूब्स के फ्यूजन िेल् डस
वचत्र 12/43: िेल्पल् डंग ऑफ फ्लू पाइप् स
वचत्र 12/44 थ्रोट पीस[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 423
वचत्र 12/46
वचत्र 12/45
वचत्र 12/47: फायरबॉ स और कम् बट न चैंबर वचत्र 12/48: फायरबॉ स और कम् बट न
ट ेस का अटैचमेंट चैंबर ट ेस का अटैचमेंट
सभी पररमाप वममी में हैं।424 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 12/49: फायरबॉ स और कम् बट न चैंबर
ट ेस का अटैचमेंट
वचत्र 12/51: बार ट ेस का अटैचमेंट
वचत्र 12/52: बार ट ेस का अटैचमेंट
वचत्र 12/50: फायरबॉ स और ररिसषल चैंबर का
अटैचमेंट[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 425
वचत्र 12/54: बार ट ेस का अटैचमेंट
वचत्र 12/53: बार ट ेस का अटैचमेंट
सभी पररमाप वममी में हैं।
.426 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 12/56: बार ट ेस का अटैचमेंट
वचत्र 12/55: बार ट ेस का अटैचमेंट
वचत्र 12/58: बार ट ेस का अटैचमेंट
वचत्र 12/57: बार ट ेस का अटैचमेंट[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 427
वचत्र 12/60*
वचत्र 12/59: बार ट ेस का अटैचमेंट
सभी पररमाप वममी में हैं।
वचत्र 12/61* वचत्र 12/62*
वचत्र 12/64: वटवपकल मैथड ऑफ वफवटंग
वचत्र 12/63*
िेल् डेड ग्राइंडर टू िेल् डेड कं बट न चैंबर एंड
* वटवपकल मैथड ऑफ वफवटंग िेल् डेड
फायरबॉ स
ग्राइंडर टू िेल् डेड कं बट न चैंबर एंड
फायरबॉ स428 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 12/65: फ्यूजन िेल् डेड ओिल मैनहोल
फ्रे म वचत्र 12/66
वचत्र 12/68: फ्लैट एंड प्ल ेट में मैनहोल के
वलए िेल्पल् डंग ब् यौरा
वचत्र 12/67
सभी पररमाप वममी में हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 429
वचत्र 12/70: वटवपकल माइल् ड ट ील
वड टेंस पीस ऑफ माउंटवनंग
वचत्र 12/69
1. सीम का तय यता परीिण
2. प् लेट का बाहरी सतह का प्रभाि
परीिण
2a & 2b. प् लेट का बाहरी सतह का पुन:
प्रभाि परीिण
3. प् लेट का आोंतररक सतह का प्रभाि
परीिण.
3a & 3b. प् लेट का आोंतररक सतह का
पुन: प्रभाि परीिण
4. ऑल िेल् ड मेटल के वलए तय यता
परीिण .
5. तनाि में बाहरी सतह के वलए सामाय य
बेंड परीिण .
वचत्र 12/71: परीिण प् लेट स का ब् यौरा
6. तनाि में आोंतररक सतह के वलए ररिसय
बेंड परीिण.
7. माइहृो और मैहृो परीिण430 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 12/72
वचत्र 12/73: नमूना 1A – ररड्यूर्जड सेश न त्य ता नमूना
सभी पररमाप वममी में हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 431
वचत्र 12/75
वचत्र 12/74: वथक प् लेट में ररड्यूर्जड सेश न त्य ता नमूना
नमूना (2) और (3) प्रभाि परीिण
वचत्र 12/76: ईजोड इंपैट टेट पीसेस432 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 12/79: टेट प् लेट स का ब्य ौरा
वचत्र 12/77: टेंसाइल टेट ऑल िेल् ड मैटल
वचत्र 12/81: िेल्पल् डंग से पहले ट्यूब का प् लेट में थोडा
वित ार
वचत्र 12/80: ब्ांच के वलए कं पंशेसन
सभी पररमाप वममी में हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 433
वचत्र 12/78434 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
सभी पररमाप वममी में हैं।
वचत्र 12/83: िेल्पल् डंग से पहले ट्यूब का प् लेट में
थोडा वित ार
वचत्र 12/82: प् लेन ट्यूब का वटवपकल अटैचमेंट[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 435
सभी पररमाप वममी में हैं।
वचत्र 12/84: ट े ट्यूब का वटवपकल अटैचमेंट436 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचि 12/85[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 437
वचत्र 12/86: लंकाशायर बॉयलर पर एंड प्ल ेट का वटवपकल अरेंजमैंट
सभी पररमाप वममी में हैं।
वचत्र 12/90*: इकोनॉवमक बॉयलर का एंड
वचत्र 12/87: लंकाशायर बॉयलर पर एंड
प् लेट का वटवपकल अरेंजमैंट
प् लेट का वटवपकल अरेंजमैंट438 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 12/88: कॉवनषश बॉयलर पर एंड प्ल ेट
का वटवपकल अरेंजमैंट
वचत्र 12/91*: इकोनॉवमक बॉयलर का एंड
प् लेट का वटवपकल अरेंजमैंट
वचत्र 12/92*: मल् टी ट्यूबलर बॉयलर पर
वचत्र 12/89: कॉवनषश बॉयलर पर एंड प्ल ेट एंड प्ल ेट का वटवपकल अरेंजमैंट
का वटवपकल अरेंजमैंट
*शेल और फनेस के एोंड प् लेट के अटैचमेंट की
विवभय न तरीको ोंके वलए विवनयम 358 को देखें .
सभी पररमाप वममी में हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 439
वचत्र 12/97: छोटे प्रकार के बॉयलरो ंमें
कु छ वब्वदंग प ेस
वचत्र 12/93: मल् टी ट्यूबलर बॉयलर पर एंड
प् लेट का वटवपकल अरेंजमैंट
अटैचमेंट के अय य तरीको ोंके वलए वचि. 12/47, 48
और 49 देखें वचि 12/98: ररिवसयबल फ्लेम बॉयलर के कु छ
िीवदोंग स् पेस
वचि 12/94: लोकोमोवटि बॉयलर के वलए फायर
बॉ् स हृाउन स् टे की व् यिस् था
वचि 12/95: लोकोटाइप बॉयलर के वलए फायर वचि 12/99: एक फनेस से अवधक िाले
बॉ् स हृाउन और टराोंसिसय स् टे की व् यिस्थ ा बॉयलर में कु छ िीवदोंग स् पेस440 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचि 12/96: िीवदोंग स् पेस
सभी पररमाप वममी में हैं।
वचि 12/100: स् टेप् ड फनेस के कु छ िीवदोंग
स् पेस
वचि 12/101: ऑल िेल् डेड गसेट स् टे के वलए
1. गसेट/ वलोंक स् टे और फनेस के बीच िीवदोंग
विवशष् ट ब् यौरा
स्प ेस
2. फनेस और ट्यूब/ ट्यूब नेस् ट के बीच
िीवदोंग स् पेस.
3. फनेस का बाहरी व् यास.
4. गसेट/ वलोंक स् टे और ट्यूब/ ट्यूब नेस् ट के
बीच िीवदोंग स् पेस.
5. शेल और ट्यूब/ ट्यूब नेस् ट के बीच िीवदोंग
स्प ेस
6. फनेस और शेल के बीच िीवदोंग स् पेस
7. शेल का आोंतररक व् यास
8. फनेस का आोंतररक व् यास
9. फनेस और ट्यूब/ ट्यूब नेस् ट के बीच फ्रों ट[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 441
एोंड पर िीवदोंग स् पेस वचि 12/102: िेल् डेड और वपोंड गसेट स् टे के वलए
10. फनेस ररअर प्ल ेट के आउटर एनुलर एररया विवशष् ट ब् यौरा
द्वारा वनवमयत िीवदोंग स् पेस.
11. विज् या के सोंदभय में स् टेवपोंग.
12. स्ट ेप् ड फनेस के अवधकतम व् यास वहस् से का
बाहरी व् यास
13. स्ट ेप् ड फनेस के य यूनतम व् यास वहस् से का
बाहरी व् यास
वचि 12/103: डायग् नल स् टे के वलए विवशष् ट ब् यौरा
(चैन लाइन मल् टीपल वलों् स को दशायती है)
सभी पररमाप वममी में हैं।442 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचि 12/105
वचि 12/104: 127 वममी तक और 127 वममी सवहत स् टैंड
पाइप् स के वलए य यूनतम िेल् ड अटैचमेंट वजय हें प्रवतपूरक प् लेट
की आिश् यकता नही ोंहोती
वचि- 12/105, 12/106 और 12/107 – 5 बोर से ऊपर के स् टैंड
पाइप् स के वलए य यूनतम िेल् ड अटैचमेंट वजसके वलए प्रवतपूरक प् लेट
की आिश् यकता नही ोंहोती।
सभी पररमाप वममी में हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 443
वचि 12/108: िाोंचेज में सेट वकया हुआ (फु ल पेवनटरेशन िेल् ड)444 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचि 12/109: मानक िेल् ड की तैयारी सोंबोंधी ब् यौरे
सभी पररमाप वममी में हैं।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 445
वचि 12/110: एडेड कों पोंसेटेड ररोंग सवहत िाोंचेज
में सेट
वचि 12/113: 127 वममी तक और 127 वममी
वचि 12/111: 127 वममी से अवधक स् टैंड पाइप् स सवहत स् टैंड पाइप् स के वलए य यूनतम िेल् ड
के वलए य यूनतम िेल् ड अटैचमेंट वजय हें प्रवतपूरक अटैचमेंट वजय हें प्रवतपूरक प् लेट की आिश् यकता
प् लेट की आिश् यकता है है446 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचि 12/112: 127 वममी से अवधक स् टैंड पाइप् स
के वलए य यूनतम िेल् ड अटैचमेंट वजय हें प्रवतपूरक
प् लेट की आिश् यकता है वचि 12/114: फ्लैंज पर िेल् डेड
सभी पररमाप वममी में हैं।
वचि 12/117
वचि 12/115: स् टटडस के वलए िेल् डेड पैडटस[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 447
वचि 12/116
वचि 12/118: बैवकों ग के वबना समकोण
शाखाओ ोंपर सेट हेतु विवशष् ट तैयारी और
असेंबली
वचि 12/119: एररया और हृॉस से् शनल एररया F के सेकें ड मूिमेंटटस (जारी)
सभी पररमाप वममी में हैं।448 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)][भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 449
वचि 12/119: एररया और हृॉस से् शनल एररया F के सेकें ड मूिमेंटटस (जारी).
सभी पररमाप वममी में हैं।
वचि 12/120450 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय-13
वनमाषण, थावपत करने और पररवनमाषण की साइट पर वनमाषणाधीन बॉयलरो ंऔर बॉयलर घटको,ं
पाइपो,ं ताप-पररितषको ंऔर ताप-पररितषक के घटको ंकी िेल्पल्डंग और मरम्मत के कायष में लगे
िेल्डरो ंऔर िेल्पल्डंग ऑपरेटरो ंके वलए योग्यता परीिा
505. अनुप्रयोग (1) ये विवनयम वनमायण, स्थावपत करने और पररवनमायण की साइट पर वनमायणाधीन
बॉयलरो ोंऔर बॉयलर घटको,ों स्टीम पाइपो ोंऔर फे रस और गैर फे रस सामग्री के ताप पररितयको ोंऔर ताप
पररितयक के घटको ोंकी िेक्तल्डोंग और मरम्मत में लगे िेल्डरो ोंऔर िेक्तल्डोंग ऑपरेटरो ोंकी परीिा पर लागू
होगों े।
भाग – 1
पररभार्ाएं
506. िेल्डर.- िेल्डर का अथय ऐसे व्यक्ति से है जो मैनुअल या सेमी आटोमेवटक िेक्तल्डोंग करने का कायय
करता है।
507. िेल्पल्डंग ऑपरेटर: िेक्तल्डोंग ऑपरेटर का अथय ऐसे व्यक्ति से है जो मशीन या आटोमेवटक िेक्तल्डोंग
उपकरणो ोंका सोंचालन करता है।
508. सेिा की उवचत वनरंतरता- िेल्डर या िेक्तल्डोंग ऑपरेटर की सेिा की वनरोंतरता को सेिा की
वनरोंतरता तभी माना जाएगा यवद छह महीने की अिवध तक िेक्तल्डोंग का कायय नही ोंकरने के बािजूद िह
प्रारोंवभक कौशल स्तर को बनाए रखता है।
509. यू-संख्या.- (1) विवनयम 520 की तावलका 13/5 में िेक्तल्डोंग उपभोज्य सामवग्रयो ोंऔर इलेररोडटस
का U-सोंख्या समूहीकरण अवनिायय रूप से उनकी उपयोवगता विशे ताओ ों पर आधाररत है, जो दी गई
िेक्तल्डोंग उपभोज्य सामग्री के साथ सोंतो जनक िेल्ड करने की िेल्डर की िमता वनधायररत करते हैं।
(2) इस समूहीकरण का उद्देश्य िेक्तल्डोंग सोंबोंधी काययवनष्पादन योग्यताओ ों की सोंख्या को कम करना है।
भाग - 2
िेल्पल्डंग की ल्पथवत
510. प्लेट ग्रुि िेल्पल्डंग.- इस अध्याय के वचि 13/1 में उक्तिक्तखत िेक्तल्डोंग क्तस्थवत वनम्नानुसार होगी,
अथायतट: -[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 451
(i) फ्लैट क्तस्थवत 13/एलजीएफ; ऊपर से जमा की गई िेल्ड धातु के साथ िैवतज तल में
प्लेट।
(ii) िैवतज क्तस्थवत 13/एलजीएच; िेल्ड िैवतज की धुरी के साथ ऊध्वायधर तल में प्लेट।
(iii) ऊध्वायधर क्तस्थवत 13/एलजीिी; िेल्ड ऊध्वायधर की धुरी के साथ एक ऊध्वायधर तल में
प्लेट।
(iv) ओिरहैड क्तस्थवत 13/एलजीओ; नीचे से जमा की गई िेल्ड धातु के साथ िैवतज तल में
प्लेट।
511. प्लेट वफलेट िेल्पल्डंग.- इस अध्याय के वचि 13/2 में उक्तिक्तखत िेक्तल्डोंग क्तस्थवत वनम्नानुसार होगी,
अथायत:
(i) फ्लैट क्तस्थवत 13/एलएफएफ; प्लेटो ों को इस प्रकार रखा गया है वक िेल्ड को इसकी अि
िैवतज और इसके थ्रोट के ऊध्वायधर के साथ जमा हो।
(ii) िैवतज क्तस्थवत 13/एलएफएच; प्लेटो ों को इस प्रकार रखा गया है वक िेल्ड को िैवतज सतह
के ऊपरी वहस्से पर और ऊध्वायधर सतह के सामने अपनी अि िैवतज के साथ जमा हो।
(iii) ऊध्वायधर क्तस्थवत 13/एलएफिी; प्लेटो ों को इस प्रकार रखा गया है वक िेल्ड को इसकी
ऊध्वायधर धुरी के साथ जमा हो।
(iv) ओिरहेड क्तस्थवत 13/एलएफओ; प्लेटो ों को इस प्रकार रखा गया है वक िेल्ड को िैवतज
सतह के नीचे और ऊध्वायधर सतह के समि अपनी अि िैवतज के साथ जमा हो।
512. पाइप ग्रुि िेल्पल्डंग.- इस अध्याय के वचि 13/3 में उक्तिक्तखत पाइप ग्रूि िेक्तल्डोंग की िेक्तल्डोंग क्तस्थवत
वनम्नानुसार होगी, अथायत:-
(i) िैवतज रोल्ड 13/पीजीआर; िेक्तल्डोंग के दौरान पाइप को अपनी धुरी के साथ िैवतज
और रोल्ड वकया जाता है तावक िेल्ड धातु िेल्ड िैवतज की धुरी के साथ ऊपर से जमा
हो।
(ii) ऊध्वायधर वफक्स्ड 13/पीजीिी; एक ऊध्वायधर क्तस्थवत में पाइप की धुरी के साथ ग्रूि
िेल्डेड जोड़ का एक परीिण और सीम को िैवतज क्तस्थवत में पररधीय रूप से िेल्डेड
वकया जाए।
(iii) िैवतज क्तस्थर 13/पीजीएच; िैवतज क्तस्थवत में पाइप की धुरी के साथ ग्रूि िेल्डेड जोड़
का एक परीिण और पाइप को घुमाए वबना सीम िेल्डेड।
(iv) पाइप का झुकाि 13/पीजीआई; िैवतज अि पर 45 वडग्री झुके पाइप की धुरी के साथ
ग्रूि िेल्डेड जोड़ का एक परीिण और पाइप को घुमाए वबना सीम िेल्डेड वकया गया
था।452 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 13/एलजीएफ: प्लेट ग्रूि फ्लैट क्तस्थवत वचत्र 13/एलजीएच: प्लेट ग्रूि िैवतज क्तस्थवत
वचि 13/एलजीिी: प्लेट ग्रूि लोंबित क्तस्थवत वचत्र 13/एलजीओ: प्लेट ग्रूि ओिरहेड क्तस्थवत
आकार: 16X150X400 वममी---2
परीिण क्तस्थवतयाों
वचत्र: 13/1 प्लेट ग्रूि जोड[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 453
वचत्र 13/एलएफएफ: प्लेट वफलेट फ्लैट क्तस्थवत वचत्र13/एलएफएच: प्लेट वफलेट िैवतज क्तस्थवत
वचत्र 13/एलएफिी: प्लेट वफलेट लोंबित क्तस्थवत वचत्र 13/एलएफओ: प्लेट वफलेट ऊपरी क्तस्थवत
आकार: 16X75X300 वममी--2
परीिण क्तस्थवतयाों
वचत्र 13/2: प्लेट वफलेट जोड (टी)454 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 13/पीजीआर: पाइप अि िैवतज वचत्र 13/पीजीिी: पाइप अि लोंबित
ऊपरी प्लैट क्तस्थवत से िेक्तल्डोंग िैवतज क्तस्थवत िेल्ड (पाइप वफक्स)
(पाइप को घुमाया गया)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 455
वचत्र 13/ पीजीएच: पाइप अि िैवतज वचत्र 13/पीजीआई/पीजीआई पाइप अि पर 45० झुका हुआ
सभी ओर से िेल्ड (पाइप वफक्स) सभी ओर से िेल्ड (पाइप वफक्स)
आकार: पाइप व्यास 127.5 वममी X 12.5 वममी मोटाई या अवधक
ट्यूब व्यास 76.1 वममी X 8.8 वममी मोटाई या कम
परीिण क्तस्थवतयाों
वचत्र 13/3 पाइप/ ट्यूब ग्रुि जोड़
भाग - 3
513. पंजीकृ त िेल्डर अथिा िेल्पल्डंग संचालक वनयुि करना.- (1) वकसी भी िेल्डर अथिा िेक्तल्डोंग
सोंचालक को स्टीम पाइप या बॉयलर की मरम्मत में या स्थल पर सोंचरना या स्थापना या वनमायण के अधीन
स्टीम पाइप या बॉयलर की िेक्तल्डोंग में वनयुि नही ोंवकया जा सकता है जब तक वक उनके पास विवनयमो ों
के तहत आिश्यक प्रमाणपि न हो और िह कम से कम अठारह ि य की आयु का हो।
(2) उसने वकसी मान्यता प्राप्त औद्योवगक प्रवशिण सोंस्थान से दो ि य का वनयवमत प्रवशिण
प्राप्त वकया हो अथिा वक उद्योग में िेल्डर या िेक्तल्डोंग ऑपरेटर के रूप में कम से कम
एक ि य वनयवमत कायय करने का अनुभि हो।
(3) ऐसे प्रमाणपि का धारक वनरीिण प्रावधकारी या सिम व्यक्ति द्वारा ऐसा करने के वलए
बुलाए जाने पर इसे प्रस्तुत करने के वलए बाध्य होगा।
(4) अनुभिी िेल्डरो ोंअथिा िेक्तल्डोंग ऑपरेटरो ोंको वनयुि करने के मामले में, वनयुि करने
िाले सोंगठन द्वारा वकए गए परीिण के उवचत ररकॉडय को बनाए रखते हुए उन्हें सोंलग्न
करने से पहले वनयोिा सेिा की उवचत वनरोंतरता सुवनवश्चत करेगा।
514. प्रारंवभक योग्यता परीिण और प्रमाणपत्र जारी करना.- (1) प्रत्येक िेल्डर अथिा िेक्तल्डोंग
ऑपरेटर सिम प्रावधकारी की सोंतुवष्ट स के वलए आिश्यक योग्यता को पूरा करेगा जो प्रमाणपि के वलए
अहयता प्राप्त करने के वलए उसके प्रदशयन का आकलन करेगा।456 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) इसके बाद, सिम प्रावधकारी, फॉमय-II में एक प्रमाणपि जारी कर सकता है वजसमें उस
िगय और प्रकार की िेक्तल्डोंग का उिेख वकया गया है वजसमें उसने योग्यता प्राप्त की है।
515. डुप्लीके ट प्रमाणपत्र जारी करना- (1) फॉमय XXI में िेल्डर अथिा िेक्तल्डोंग ऑपरेटर को जारी
वकए गए प्रमाणपि के खोने की क्तस्थवत में, सिम प्रावधकारी वजसने मूल प्रमाणपि जारी वकया था, िो
डुप्लीके ट प्रमाणपि जारी कर सकता है बशते सिम प्रावधकारी मामले की सच्चाई से सोंतुष्ट स हो।
(2) डुप्लीके ट प्रमाणपि जारी करने के वलए शुल्क विवनयम 331 के अनुसार होगा।
516. प्रमाणपत्र की िैधता- (1) इन विवनयमो ोंके तहत िेल्डर अथिा िेक्तल्डोंग ऑपरेटर को जारी वकया
गया प्रमाणपि, जारी करने के वतवथ से चौबीस महीनो ोंकी अवधकतम अिवध के वलए िैध होगा, बशते वक
धारक को परीिण के बाद, उस कायय की श्रेणी और प्रकार वजसके वलए िह योग्य है, पर उवचत वनरोंतरता
के साथ वनयुि वकया गया हो।
517. प्रमाणपत्र का पुनिैधीकरण अथिा निीनीकरण.- (1) यवद कोई िेल्डर अथिा िेक्तल्डोंग ऑपरेटर
लगातार योग्य प्रवहृया में लगा हुआ है और उस सोंगठन द्वारा प्रमावणत है वजसके वलए िह काम कर रहा है,
तो समय-समय पर योग्यता प्राप्त करने की तारीख से 24 महीने की िैधता के बाद प्रमाण पि का
निीनीकरण वकया जा सकता है और निीनीकरण की यह अिवध एक बार में चौबीस माह से अवधक नही ों
होगी
(2) िेक्तल्डोंग वनरोंतरता का वििरण सोंगठन द्वारा विवधित हस्तािररत फॉमय-XX में भरा जाएगा और मूल
प्रमाण पि के साथ सोंरवित वकया जाएगा और निीनीकरण के वलए सिम प्रावधकारी को प्रस्तुत वकया
जाएगा।
(3) वनरोंतरता मानदोंडो ोंको पूरा न करने की क्तस्थवत में िेल्डर अथिा िेक्तल्डोंग ऑपरेटर सिम प्रावधकारी
की सोंतुवष्ट स के वलए पुन: योग्यता परीिण हेतु उपक्तस्थत होगा।
518. योग्यता रद्द करना.- (1) सिम प्रावधकारी द्वारा िेल्डर अथिा िेक्तल्डोंग ऑपरेटर के योग्यता प्रदशयन
को रद्द वकया जा सकता है यवद विवशष्ट सताओ ों के अनुरूप िेल्ड करने की उसकी िमता पर सिाल उठाने
का कोई विवशष्ट स कारण है।
(2) िह योग्यता जो ऐसी िेक्तल्डोंग के सोंबोंध में है, जो िह कर रहा है, को प्रमावणत करता है, को रद्द कर
वदया जाएगा।
519. योग्यता का पदानुहृम.- (1) (क) शुरूआत में, िेल्डर या िेक्तल्डोंग ऑपरेटर काबयन स्टील प्लेट में
योग्यता ले सकता है और इसके बाद, इसे एलॉय स्टील प्लेट, काबयन स्टील अथिा एलॉय स्टील पाइप और
ट्यूब योग्यता में योग्यता परीिण के वलए उपक्तस्थत होने की अनुमवत दी जाती है अथिा िेल्डर या िेक्तल्डोंग
ऑपरेटर का प्रत्यि रूप से पाइप और ट्यूब के हायर ग्रेड के वलए परीिण वकया जा सकता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 457
(ख) वकसी विशे ग्रेड की सामग्री या उत्पाद रूप के परीिण द्वारा किर की जाने िाली योग्यता की रेंज
तावलका 13/1 में दशायई गई है।
(2) ऐसे िेल्डर अथिा िेक्तल्डोंग ऑपरेटरो ोंका योग्यता प्रमाणपि, वजन्होनों े अच्छी तरह से योग्यता परीिण
पूरा वकया है, विवनयम 517 के अनुसार प्रदान की जा सकती है।
तावलका 13/1 सामग्री और उत्पाद रूप में िेल्डर अथिा िेल्पल्डंग ऑपरेटरो ंके वलए योग्यता की रेंज
वनम्नवलल्पखत वनम्नवलल्पखत के वलए योग्य
परीिण
हृम सं. काबषन टील काबषन टील एलॉय टील एलॉय टील
प्लेट पाइप और प्लेट पाइप और
ट्यूब ट्यूब
(1) (2) (3) (4) (5) (6)
1. काबयन स्टील प्लेट हाों नही ों नही ों नही ों
2. काबयन स्टील पाइप हाों हाों नही ों नही ों
और ट्यूब
3. एलॉय स्टील प्लेट हाों नही ों हाों नही ों
4. एलॉय स्टील पाइप हाों हाों हाों हाों
और ट्यूब
520. िेल्डर अथिा िेल्पल्डंग ऑपरेटर की पुन: योग्यता के वलए अवनिायष अपेवित िैररएबल-
वनम्नवलक्तखत अवनिायय िैररएबल में से वकसी एक में जब भी पररितयन वकया जाता है, तो िेल्डर अथिा
िेक्तल्डोंग ऑपरेटर को पुन: योग्यता की आिश्यकता होगी अथायत:-
(i) बैवकों ग का हटाया जाना- िेल्डर अथिा िेक्तल्डोंग ऑपरेटर की पुन: योग्यता की आिश्यकता
होती है जब बैंवकों ग हटा दी जाती है और डबल-िेल्डेड ग्रूि िेल्ड को बैवकों ग के साथ िेक्तल्डोंग
माना जाता है।
(ii) गैस िेक्तल्डोंग में बैवकों ग को शावमल करना- िेल्डर अथिा िेक्तल्डोंग ऑपरेटर को पुन: योग्यता
की आिश्यकता होगी, जब गैस िेक्तल्डोंग प्रवहृया में बेंवकों ग को शावमल वकया जाता है।458 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iii) इलेकटरॉड की U सोंख्या में बदलाि- िेल्डर को पुन: योग्यता की आिश्यकता होगी जब
उपभोज्य समूह पदनाम को एक U सोंख्या से दूसरी U सोंख्या में बदल वदया जाता है (इसे
विवनयम की तावलका 13/5 और तावलका 13/6 देखें)।
(iv) िेल्डेड वकए जाने िाले बेस धातु (एम सोंख्या) में बदलाि- िेल्डर की पुन: योग्यता की
आिश्यकता होगी जब बेस धातु बदली जाती है (अध्याय-2 की तावलका 2/1 और इस
अध्याय की तावलका 13//7 देखें)। हालाोंवक, िह िेल्डर जो स्टील की उच्च ग्रेड में योग्यता
रखता है, को स्टील के वनम्न ग्रेड के िेल्ड की अनुमवत दी जाएगी।
(v) एक िेक्तल्डोंग प्रवहृया से वकसी अन्य प्रवहृया में पररितयन-िेल्डर को पुन: योग्यता की
आिश्यकता होगी जब िेक्तल्डोंग प्रवहृया में पररितयन होता है।
(vi) डायरेर करोंट से अल्ट्रनेवटोंग करोंट धारा में पररितयन और विलोमत- िेल्डर को पुन:
योग्यता की आिश्यकता होगी जब करोंट के प्रकार को ‘डीसी’ से ‘एसी’ में बदला जाता है
और विलोमतः ।
(vii) िेक्तल्डोंग क्तस्थवत में बदलाि- (क) िेल्डर को पुन: योग्यता की आिश्यकता होगी जब वजस
क्तस्थवत में िह योग्यता है उसे बदला जाता है।
(ख) िेल्डर वजसे अवधक कवठन क्तस्थवत में कायय करने की योग्यता है, उसे कम कवठन क्तस्थवत
जैसा वक तावलका 13/2, 13/3 और 13/4 में वदया गया है, के वलए योग्य माना जाएगा।
(viii) पाइप व्यास की योग्य रेंज में पररितयन।
(ix) ऊध्वायधर िेक्तल्डोंग के िेक्तल्डोंग अनुहृम में पररितयन।
(x) वडपोवजटेड िेल्ड धातु की वनधायररत मोटाई में पररितयन (तावलका 13/8 देखें)
तावलका 13/2: अवतररि ल्पथवत वजसमें िेल्डर की योग्यता है (प्लेट ग्रूि िेल्पल्डंग)
हृम सं. परीिण ल्पथवत अवतररि योग्य ल्पथवतयां
फ्लैट िैवतज ऊर्ध्ाषधर ओिरहेड
(वचत्र (वचत्र (वचत्र वचत्र (13/4)
13/1) 13/2) 13/3)
(1) (2) (3) (4) (5) (6)
1. फ्लैट (वचि 13/1) हाों नही ों नही ों नही ों
2. िैवतज (वचि 13/2) हाों हाों नही ों नही ों
3. ऊध्वायधर (वचि 13/3) हाों नही ों हाों नही ों
4. ओिरहेड वचि (13/4) हाों नही ों नही ों हाों[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 459
तावलका 13/3: अवतररि ल्पथवत वजसमें िेल्डर योग्य होता है (प्लेट वफलेट िेल्पल्डंग)
हृम सं. परीिण ल्पथवत अवतररि योग्य ल्पथवतयां
फ्लैट िैवतज ऊर्ध्ाषधार ओिरहेड
(वचत्र 13/LFF) (वचत्र (वचत्र वचत्र
13/LFH) 13/LFV) (13/LFO)
(1) (2) (3) (4) (5) (6)
1. फ्लैट (वचि 13/LFF) हाों नही ों नही ों नही ों
2. िैवतज (वचि 13/LFH) हाों हाों नही ों नही ों
3. ऊध्वायधार (वचि 13/LFV) हाों हाों हाों नही ों
4. ओिर हेड वचि (13/LFO) हाों हाों नही ों हाों
तावलका 13/4: अवतररि ल्पथवतयां वजसमें िेल्डर योग्य हो (पाइप ग्रूि िेल्पल्डंग)
हृम सं. परीिण ल्पथवत अवतररि योग्य ल्पथवतयां
िैवतज रोल्ड ऊर्ध्ाषधार िैवतज पाइप 45० पर
वफक्स्ड वफक्स्ड झुका हुआ
(वचत्र
13/PGR) (वचत्र (वचत्र 13/ (वचत्र 13/PGI)
13/PGV) PGH)
(1) (2) (3) (4) (5) (6)
1. िैवतज रोल्ड हाों नही ों नही ों नही ों
(वचि 13/PGR)
2. ऊध्वायधार वफक्स्ड हाों हाों नही ों नही ों
(वचि 13/PGV)
3. िैवतज वफक्स्ड हाों नही ों हाों नही ों
(वचि 13/ PGH)
4. पाइप 45० पर झुका हाों हाों हाों हाों460 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
हुआ
(वचि 13/PGI)
तावलका 13/5 इलेिरॉड िगीकरण ग्रुप
हृों म सों. समूह पदनाम इलेररॉड िगीकरण
(1) (2) (3)
1 U1 EXX10, EXX13, EXX13-X.
2 U2 EXX15, EXX16, EXX18, EXX48, EXX15-X, EXX16-X, EXX18-X,
E410-15/16, E347-15/16, E308-15/16, E309-15/16, E310-15/16,
E316-15/16, E2209-15/16
3 U3 ERXXS-X, ERXXX (ऑटेवनक टेनलेस टील), ERXXXX (डुप्लेक्स
टेनलेस टील), EXXT-X, EXXC-X
4 U4 सभी वनकल और वनकल एलॉय
5 U5 ECoCr-A/B/C/E,
6 U6 ERCoCr-A/B/C/E/F/G
नोट: इस तावलका में िगीकरण पदनाम में प्रयुि अिर ‚‛ इलेररॉडटस के विवभन्न िमता स्तरो ोंके
वलए है, ,60*415+-, 70 *485+, 80 *550+, 90*620+, 100*690+, 110*760+, 120*830+ ‘X’ िेल्ड धातु के
रासयवनक विश्ले ण के वलए है।
तावलका 13/6: िैक्लवपक U-नंबर योग्यता िेल्डर और िल्पल्डंग ऑपरेटर की योग्यता के वलए
हृम सं. वनम्नवलल्पखत के साथ परीिण योग्यता रेंज
(1) (2) (3)
1 U1 के िल U1[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 461
2 U2 U1 और U2
3 U3 के िल U3
4 U4 के िल U4
5 U5 के िल U5
6 U6 के िल U6
तावलका 13/7: िैकक्तिक ‘M’ नोंबर योग्यता िेल्डरो ोंऔर िेक्तल्डोंग ऑपरेटरो ोंकी योग्यता के
वलए
हृम वनम्नवलल्पखत ‘एम’ नंबर वनम्नवलल्पखत ‘M’ नंबरो ंकी रेंज के वलए योग्य
सं. के साथ परीिण वकया
गया
(1) (2) (3)
1 M1 Gr2 के िल M1
2 M5A or M5B or M15E M1 to M15E
3 M8 M1 & M8
4 M43 के िल M43
तावलका 13/8: िेल्डर अथिा िेल्पल्डंग ऑपरेटरो ंयोग्यता के वलए योग्य मोटाई की रेंज
हृम सं. t(वममी)a िेल्ड की वडपोवजट मोटाई योग्य मोटाई की रेंज
(1) (2) (3)
1. t < 12 2t
2. t ≥ 12 b असीवमत462 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
नोट:
क. मल्ट्ी प्रोसेस िेक्तल्डोंग के वलए ‚t‛ प्रत्येक प्रवहृया की वडपोवजट मोटाई है।
ख. परीिण सामग्री को न्यूनतम तीन लेयर के साथ िेल्ड करना है।
तावलका 13/9: हाडष-फे वसंग (वियर रेवसटेंट) और िरण- रेवसटेंट ओिरले के वलए िेल्डर और
िेल्पल्डंग ऑपरेटरो ंकी योग्यता, मोटाई सीमा और आिरण परीिण नमूने
हृम परीिण कू पन की मोटाई (T) िरण रेवसटेंट और हाडष फे वसंग ओिरले
सं.
मोटाई योग्य बेस धातु
(1) (2) (3)
1 25 वममी से कम (T) योग्य से असीवमत
2 25 वममी और इससे ऊपर 25 वममी से असीवमत
भाग- 4
521. िेल्डर अथिा िेल्पल्डंग ऑपरेटरो ंकी प्राथवमक योग्यता के वलए परीिण.- िेल्डर की
योग्यता के वलए, िेल्डर अथिा िेक्तल्डोंग ऑपरेटर को विवनयम 522 से 526 में वदए गए परीिणो ोंके वलए
उपक्तस्थत होना होगा।
522. सै्ांवतक परीिा:- िेल्डर अथिा िेक्तल्डोंग ऑपरेटर को वनम्नवलक्तखत वि यो ोंपर मौक्तखक या अन्य
प्रकार से प्रश्नो ोंके उत्तर देने की आिश्यकता होगी-
(i) िेल्ड की तैयारी
(ii) िेक्तल्डोंग उपकरण की काययप्रणाली का प्रारोंवभक ज्ञान
(iii) िेल्ड की जाने िाली सामग्री के गुणो ों – गमय और ठण्डी काययप्रणाली, तापीय चालकता,
सोंलयन वबयदु, ऑक्सीकरण (िेल्डर के वलए वमश्र धातु इस्पात का कायय करने िाले िेल्डर)
का प्रारोंवभक ज्ञान।
(iv) इलेररो-तकनीकी वसद्ाोंतो ोंका प्रारोंवभक ज्ञान – करोंट का प्रकार, स्टराइविोंग आकय िोल्ट्ेज,
िेक्तल्डोंग-आकय िोल्ट्ेज (आकय िेल्डरो ोंके वलए)
(v) िेल्ड के प्रकार, िेक्तल्डोंग के दो और उनकी रोकथाम, िेक्तल्डोंग तकनीक (आगे
के कायय और वपछले कायय), एमपरेल की तरह इलेक्तररकल पैरामीटर का प्रभाि[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 463
(इलेक्तररक आकय िेल्डर के वलए), मूल साम्रगी का पूिय तापन और बाद की ताप
प्रवहृया।
(vi) विवभय न प्रकार के िेल् डटस और स् टील तथा अलग-अलग स् थान पर मौजूद जॉइोंटटस के वलए
इलेररॉड और वफलर धातु।
523. व्यािहाररक परीिण – (1) िेल्डर अथिा िेक्तल्डोंग ऑपरेटर को विवनयम 524 से 526 में वदए गए
परीिण देने होगों े और पास करना आिश्यक होगा।
(2) इन परीिणो ोंके वलए प्रयुि प्लेट, ट्यूब, पाइप और इलेररॉड की सामग्री उपयुि विवनयमो ोंके
अनुरूप होगी जैसा वक प्रत्येक मामले में लागू होगा।
524. प्लेट िेल्पल्डंग.- (1) अपेवित क्तस्थवत में बॉयलर गुणित्ता प्लेटो ोंपर वसोंगल िी, डबल िी या डबल यू
ग्रूि के साथ प्लेटो ोंके दो खोंडो ोंके जोड़ पर एक ग्रुि िेल्डेड जोड़ (विवनयम 512 का वचि 13/1 देखें)।
(2) अपेवित क्तस्थवत में कम से कम 16 वममी मोटी प्लेटो ोंका उपयोग करके 381 वममी की लोंबाई पर एक
वफलेट िेल्डेड जोड़ (वचि 13/2 देखें)।
525. पाइप और ट्यूब िेल्पल्डंग.─ (1) िैवतज क्तस्थवत में अि के साथ पाइप के दो खोंडो ोंका एक बट
िेल्डेड जोड़। (वचि 13/PGH देखें) पाइप व्यास 127.5 X 12.5 वममी मोटाई (न्यूनतम) के साथ।
(2) ऊध्वायधर क्तस्थवत में अि के साथ और 300 वममी (वचि 13/ PGV देखें) की वपच दूरी पर वनकटिती
क्तस्थवतयो ोंमें वफक्स वकये गये समान आकार के ट्यूब के साथ व्यास 76.1 वममी x 7.1 वममी मोटाई
(अवधकतम) के के बॉयलर ट्यूब के दो खोंडो ोंपर एक बट िेल्डेड जोड़।
(3) 88.9 वममी (न्यूनतम) व्यास की िाोंच ट्यूब से पाइप के बीच एक िेल्ड (वचि 13/7 देखें) िाोंच ट्यूब
का आकार 89 वममी व्यास 6 वममी मोटाई से कम नही ोंहोना चावहए।
526. क्लैवडंग.- (1) यह परीिण के िल िरण प्रवतरोधी/ हाडय फे वसोंग ओिरले करने िाले िेल्डरो ोंअथिा
िेक्तल्डोंग ऑपरेटरो ोंके वलए होता है।
(2) योग्यता परीिण कू पन न्यूनतम 150 वममी X 150 वममी X T (बेस मेटल की मोटाई) आकार का
होना चावहए।
(3) िेल्ड ओिरले क्लैवडोंग 38 वममी चौड़ी (न्यूनतम) और 5 वममी मोटाई (न्यूनतम दो परत) की होना
चावहए।
(4) िेल्ड ओिरले की पहली परत में कम-से-कम तीन िेल्ड बीडटस होगी (योग्यता सीमा के वलए
अध्याय 13 की 13/9 तावलका देखें)।464 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
नोट: िेल्डरो ोंकी जाोंच के वलए प्रत्येक िेल्डेड परीिण सामग्री पर िेल्ड के दोनो ोंओर एक पहचान वच्
लगाया जाएगा।
527. िेल्डर अथिा िेल्पल्डंग ऑपरेटर की पुन: योग्यता के वलए परीिण.- (1) व्यािहाररक परीिणो ों
के वलए प्रयुि प्लेट, ट्यूब, पाइप और इलेररॉड की सामग्री उपयुि विवनयमो ोंकी आिश्यकता के
अनुरूप होगी जैसा वक प्रत्येक मामले में लागू हो सकता है।
(2) पुन: योग्यता के वलए, िेल्डर अथिा िेक्तल्डोंग ऑपरेटर की सैद्ाोंवतक वि य में परीिा की
आिश्यकता नही ोंहै। उन्हें वनम्नवलक्तखत व्यािहाररक परीिणो ोंमें अहयता प्राप्त करने की आिश्यकता होगी
अथायत:
(i) प्लेट िेल्पल्डंग; मूल रूप में योग्य क्तस्थवत में एक ग्रूि िेल्डेड जोड़ बनाना होगा।
(ii) पाइप और ट्यूब िेल्पल्डंग: जैसा वक विवनयम 525 में बताया गया है।
(iii) क्लैवडंग; जैसा वक विवनयम 526 में बताया गया है।
(3) जब एक िेल्डर लगातार उत्पादन िेल्ड में सोंलग्न रहता है, तो सिम प्रावधकारी की सोंतुवष्ट स के
अनुरूप िास्तविक उत्पादन जोड़ो ोंपर परीिण को उप विवनयम (2) के खोंड (i), (ii) और (iii) के तहत
उपरोि वनधायररत परीिणो ोंके विकि के रूप में वीकीकार वकया जा सकता है।
भाग – 5
प्रारंवभक योग्यता परीिणो ंके वलए परीिण नमूनो ंकी जांच
528. ग्रूि िेल्डेड प्लेट नमूने- (1) (क) िेक्तल्डोंग के बाद ग्रुि िेल्डेड प्लेट नमूनो ोंको िेक्तल्डोंग के कारण
वकसी भी विकृ वत को दूर करने के वलए ठोंडा होने तक हल्के से दबाया जा सकता है।
(ख) परीिण के नमूने को दृश्य परीिा और रेवडयोग्रावफक परीिा के अधीन होगों े जैसा वक विवनयम 164 के
उप-विवनयम (2) में वदया गया है और इसके बाद परीिण सामग्री को वचि 13/4 में वदखाए गए हृम में
वचव्त कर वदया जाएगा और काटकर वनकाला जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 465
वचत्र 13/4 प्रारंवभक योग्यता परीिण के वलए परीिण प्लेट से परीिण नमूना हटाने का हृम
(2) तन्यता परीिण नमूना (T और T ) विवनयम 158 के अनुसार तैयार वदया जाएगा। बेंड
1 2
परीिण नमूने प्रत्येक दो (FB और RB) विवनयम 160 और 161 के अनुसार तैयार और परीिण
वकया जाएगा। दो नमूने (M और M ) तैयार वकए जाएोंगे, एक माइहृो के वलए और दूसरा मैहृो
1 2
परीिा के वलए जो विवनयम 164 के उप-विवनयम (1) के अनुसार और मैहृो और माइहृो परीिा
के पररणाम सोंतो जनक होने चावहए।
(3) उप-विवनयम (4) में दी गई आिश्यकताओ ोंको पूरा करने पर परीिण को सोंतो जनक
माना जाएगा। दोनो ोंपरीिण नमूनो ोंकी तन्यता िमता को सामग्री के वलए अपेवित िमता की
आिश्यकता को पूरा करना होगा।
(4) बेंड परीिण नमूनो ोंका उत्तल पि नमूने की मोटाई के तीन गुना मैनडरैल व्यास के साथ
180 वडग्री तक झुकने के बाद वकसी भी वदशा में 3 वममी से अवधक आकार में कोई अवनयवमतता
नही ोंवदखाएगा। एलॉय स्टील नमूने के मामले में, बेंड का कोण सिम प्रावधकारी द्वारा तय वकया
जाएगा, बशते वक कोण वकसी भी क्तस्थवत में 120० से कम ना हो।
529. वफलेट िेल्डेड प्लेट नमूने.- (1) (क) वफलेट-िेल्ड परीिण नमूने की तैयारी अध्याय 13 के वचि
13/5 के अनुरूप होगी।
(ख) परीिण नमूने में कोई दृश्यमान दरार नही ोंहोनी चावहए। इसे के न्द्रीय खोंड (254 वममी) लोंबा और
छोर के दो खोंडो ोंप्रत्येक लगभग (25 वममी) लोंबा बनाने के अनुसार अनुप्रस्थ रूप में काटा जाएगा।
(2) (क) मध्य खोंड को पार्श्य रूप से इस तरह लोड वकया जाना चावहए वक िेल्ड की रूट तनाि में
हो।466 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) लोड तब तक लगातार बााया जाना चावहए जब तक वक नमूना फ्रै क्चर या बेंड अपने आप फ्लैट न
हो जाए।
(3) िेल्ड की सोंरचना की स्पष्ट स पररभा ा देने के वलए एक उपयुि रीएजेंट के साथ एोंड सेक्शन में से
एक के कटे हुए एोंड को पॉवलश और एच्ड वकया जाएगा।
(4) उप विवनयम (5) में उक्तिक्तखत आिश्यकताओ ोंके पूरा होने पर परीिण को सोंतो जनक माना जाएगा।
(5) (क) लोवडोंग के दौरान बेंड नमूना फ्रै क्चर नही ोंहोना चावहए और यवद नमूना फ्रै क्चर होता है, तो
खोंवडत सतह दरार या अपूणय धातु भेदन का कोई साक्ष्य नही ोंहोना चावहए, और खोंवडत सतह पर वदखाई
देने िाले समािेशन और गैस पावकट की लोंबाई का योग (51 वममी.) से अवधक नही ोंहोना चावहए।
(ख) िेल्ड के हृॉस सेक्शन की दृश्य परीिा वनम्नवलक्तखत प्रस्तुत करेगी:
(i) रूट पर पूणय सोंलयन और दरारो ोंसे मुि।
(ii) िेल्ड प्रोफ़ाइल की उत्तलता या अितलता 1.6 वममी से अवधक नही ों
(iii) वफलेट के दोनो ोंलैग्स की लोंबाई का अोंतर 1.6 वममी के भीतर
वचत्र 13/5: प्रदशषन योग्यता के वलए वफलेट िेल्ड साउंडनेस परीिण[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 467
530. ग्रूि और वफलेट िेल्डेड पाइप और ट्यूब नमूने. – (1) (क) ग्रूि िेल्डेड पाइप और ट्यूब के
नमूनो ोंको वचव्त वकया जाएगा और परीिण सामग्री को वचि 13/6 के अनुसार काटा जाएगा।
(ख) परीिण सामग्री फे स बेंड, रूट बेंड और इोंच परीिण के वलए तैयार का जाएगी।
(2)(क) पाइपो ोंको चपटा नही ोंवकया जाएगा, लेवकन रूट पर 0.8 वममी. से कम प्रबलन के साथ उनकी
कणय क्तस्थवतयो ोंमें परीिण वकया जाएगा।
(ख) वकसी अवतररि िेल्ड धातु को वघसकर हटाया जाएगा।
(3) बेंड परीिण नमूने, नमूने की उत्तल की ओर 3 वममी से अवधक की अवनयावमतता नही ोंदशायएगा।
वचत्र 13/6 िेल्डेड पाइप/ ट्यूब से परीिण नमूने को हटाने का हृम
(4) वफलेट िेल्डेड िाोंचेज का वनम्नानुसार दृश्यता परीिण और मैहृो परीिण वकया जाएगा:
(क) इस प्रकार प्राप्त वकए गए परीिण िेल्ड की रूट पेनेटरेशन, अोंडरकट से मुक्ति, रनो ोंके वडसपोजीशन,
सतह की एकरूपता, , प्रोफाइल के आकार जोड़ की वचकनाहट, कै विटी और लैग से मुक्ति, िेल्ड
वडपॉवजट के आयाम, िेल्ड मेटल की गुणित्ता (ओिरहीवटोंग, सतही दरार, फू ली हुई सतह, आवद) के वलए
दृवष्ट सगत रूप से जाोंच की जाएगी। वकसी भी टुकड़े गोंभीर कमी वदखाई पड़ने पर उसे अवीकीकार कर वदया
जाएगा।468 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) प्रत्येक िाोंच िेल्ड टेस्ट पीस को वचि 13/7 में वदखाए गए अनुसार काटा जाएगा और इस प्रकार प्राप्त
वकए गए प्रत्येक भाग को तैयार वकया जाएगा और अोंवकत वकया जाएगा। इसके बाद सोंलयन की वडग्री,
रूट पेवनटरेशन की वडग्री, गैर-धातु (लेग) समािेश की अनुपक्तस्थवत और िेल्ड धातु की गुणित्ता के वलए
खोंडो ोंकी जाोंच की जाएगी। जोड़ में रूट सोंलयन ठीक लगना चावहए, बेसल हृै वकों ग से पूणय रुप से मुि
होना चावहए और कै सी भी छोटी से छोटी कमी नही ोंहोनी चावहए।
मुख्य पाइप का बाहरी व्यास D1- व्यास, 127X10 वममी. मोटाई या उससे अवधक
उपखोंड D2 की बाहरी व्यास – व्यास. 89 वममी. X6 मी.मी मोटाई या उससे अवधक
वचत्र 13/7 ब्ांच िेल्ड के वलए नमूना हटाने का हृम
531. िेल्डेड ट्यूब जोड.─ (1) ट्यूब से लगभग 203 वममी लोंबी परीिण हेतु काटा जाएगा, वजसमें
िेल्डेड जॉइोंट लगभग मध्य में होगा। दृश्य परीिण के बाद, एक परीिण टुकड़ा जो 13 वममी से अवधक न
हो, ट्यूब के वलए 6 वममी या उससे कम मोटाई और 6 वममी से अवधक की मोटाई के वलए ट्यूब की मोटाई
का तीन गुना को अनुदैध्यय रूप से काटा जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 469
(2) (क) िेल्ड के दोनो ोंओर परीिण टुकड़े की लोंबाई 76 वममी. से कम नही ोंहोगी।
(ख) आोंतररक बीड की थोड़ी अवधकता तब तक वफल की जा सकती है जब तक वक यह सामान्य सतह
पर 0.8 वममी से अवधक न हो।
(ग) इसके बाद परीिण टुकड़े को ट्यूबो ोंकी मोटाई के तीन गुना के बराबर व्यास के 90° राउण्ड
करते हुए तनाि में रूट के साथ पीछे की ओर मोड़ा जाता है।
(घ) एलॉय स्टील पाइप और ट्यूब के सोंबोंध में, िेल्ड सुदृढीकरण को उसके स्तर से नीचे हटाने के बाद
लेवकन सतह से नीचे नही,ों व्यास 4t के पहले राउण्ड करते हुए और 90 वडग्री के कोण के माध्यम से बेंड
परीिण नमूना वबना सीधा वकए मोड़ा जाएगा।
(ङ) मोड़ने का कायय चोट या दबाि द्वारा पूरा वकया जाएगा। यह सुवनवश्चत करने के वलए ध्यान रखा
जाना चावहए वक पहले िाले को इस तरह से रखा जाए वक िेल्ड को बेंड के हृाउन पर बनाए रखा जाए।
(च) परीिण नमूना विफलता के सोंके तो ोंके वबना 90° वडग्री तक मोड़े जाने में सिम हो, हालाोंवक, नमूने
के वकनारो ोंपर मामूली असामवयक विफलता को अवीकीकृ वत का कारण नही ोंमाना जाएगा।
(छ) अपूणय रूट भेदन या रूट सोंलयन की कमी का कारण होने िाली मामूली कमी का पता चलने को
अवीकीकृ वत का कारण माना जाना अपेवित नही ोंहै बशते इस कमी के बािजूद दोनो ोंओर अच्छी धातु हो।
532. क्लैवडड नमूना.- (1) िरण प्रवतरोधी अथिा हाडय फे वसोंग ओिरले िेल्ड की सतह की तरल भेदन
विवध द्वारा जाोंच की जाएगी और विवनयम 164 के उप-विवनयम (2) में वदए वीकीकृ वत मानको ोंको पूरा
करेगा।
(2) िरण प्रवतरोधी परीिण कू पन को विवनयम 160 और 161 के अनुसार चार साइड-बेंड (B1, B2,
B3, B4) परीिण नमूने जो िेवडोंग की वदशा के लोंबित है, को बनाने के वलए विभावजत वकया जाएगा।
परीिण नमूने को वचि 13/8 में वनवदयष्ट स स्थानो ोंसे हटाया जाएगा।470 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्लेट का आकार 150x150xT वममी (आधार धातु की मोटाई)
प्लेट 13/8: प्राथवमक/ पुन: योग्यता परीिण के वलए िरण प्रवतरोधी ओिरले से परीिण नमूना
हटाने का हृम
(3) (क) हाडय फे वसोंग ओिरले बेस मेटल के हाडय फे वसोंग ओिरले की वदशा में वतययक खोंड वकये जायेंगे।
(ख) बनाए खोंडो ोंसे वनकले हाडय फे वसोंग के दो फलको ोंको पॉवलश वकया जाएगा और एक उपयुि
उत्कीणयक के साथ उके रा जायेगा और उनकी 5X आिधयन के साथ दृवष्ट सगत रूप से जाोंच की जायेगी।
(ग) िेल्ड धातु या ताप से प्रभावित िेि में, दरारें, सोंलयन की कमी, या अन्य रैक्तखक दो की जाोंच की
जायेगी (वचि 13/9 को देखें)।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 471
प्लेट का आकार 150x150 T (आधार धातु की मोटाई)
वचत्र 13/9 : प्रारंवभक/पुनः योग्यता जांच हेतु हाडष फे वसंग ओिरले से मेहृो
जांच नमूनो ंको हटाने का हृम
533. नामंजूरी से पहले अवतररि जांच.– (क) जहाों विवनयम 528 से 531 के अनुसार जाोंच वकया गया
कोई भी जाोंच टुकड़ा विवनवदयष्ट स आिश्यकताओ ों को पूरा करने में विफल होता है, तो एक और टुकड़े को
नमूने से काटा जा सकता है और उस पर पुनः जाोंच की जा सकती है और यवद कोई जाोंच टुकड़ा
आिश्यक मानको ोंको पूरा नही ोंकरता हैं तो दो और िेल्ड वकए जाएोंगे और उपरोि उप-विवनयम की
प्रवहृया दोहराई जाएगी।
(ख) यवद इनमें से कोई भी िेल्ड आिश्यक मानक को पूरा नही ोंकरता हैं, तो िेल्डर को प्रमाण पि के
वलए योग्य नही ोंमाना जाएगा।
534. सिम प्रावधकारी का वनणषय - िेल्डर प्रमाणपि वीकीकृ त करने से इन्कार करने का सिम
प्रावधकारी का वनणयय अोंवतम होगा।
भाग-6
पुनः योग्यता परीिण के वलए परीिण नमूनो ंकी जांच
535. ग्रूि िेल्डेड प्लेट के नमूने.- (1) (क) िेक्तल्डोंग के बाद ग्रूि िेल्डेड प्लेट के नमूनो ोंमें िेक्तल्डोंग के
कारण हुई वकसी भी विकृ वत को दूर करने के वलए लाइटली प्रेस्ड कोल्ड वकया जा सकता है।472 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) तब परीिण के नमूनो ोंका दृश्य परीिण और रेवडयोग्रावफक परीिण वकया जाएगा जैसा वक
विवनयम 164 के उप विवनयम (2) में िवणयत है और इसके बाद परीवित खोंडो ोंको वचि 13/10 में वदखाए
गए हृम में वचव्त वकया जायेगा और काटा जाएगा।
(2) (क) फे स और रूट बेंड टेस्ट नमूनो ोंको (FB और RB) तैयार वकया जाएगा और विवनयम 135 और 136
के अनुसार उनके परीिण वकए जाएोंगे। विवनयम 164 के उप-विवनयम (1) के अनुसार प्रत्येक के दो नमूने
(M और M ) तैयार वकए जाएोंगे, एक माइहृो के वलए और दूसरा मैहृो परीिण के वलए।
1 2
(ख) वनम्नवलक्तखत आिश्यकताओ ों को पूरा करने पर परीिण को सोंतो जनक माना जाएगा।
वचत्र 13 / 10 : पुन: योग्यता परीिण के वलए परीिण प्लेट से परीिण नमूनो ंको हटाने का हृम
(i) बेंड टेस्ट नमूनो ोंको उत्तल तल 180 वडग्री तक झुकाने के बाद तीन गुना मोटाई के मैनडरेल के
व्यास के साथ वकसी भी वदशा में 3 वममी से अवधक आकार में कोई अवनयवमत्ता नही ोंनजर आनी चावहए
और अलॉय स्टील के नमूनो ोंके मामले में, बेंड का कोण सिम प्रावधकारी द्वारा तय वकया जाना है, बशते
वक कोण वकसी भी क्तस्थवत में 120 वडग्री से कम नही ोंहोगा।
(ii) मैहृो/माइहृो परीिण िेल्ड मेटल और ऊष्मा प्रभावित िेि (एचएजेड) के माइहृोस्टरक्चर को
सोंतो जनक रूप से प्रकट करती है।
536. वफलेट प्लेट िेल्ड वकया गया नमूने – ये नमूने विवनयम 529 में वदए गए वििरण के अनुसार
तैयार वकए जाएोंगे ।
537. पाइप और ट्यूब िेल्पल्डंग – नमूनो ोंकी तैयारी और उनके परीिण, विवनयम 530 या 531 में जैसा
भी मामला हो, वनधायररत प्रवहृया के अनुसार वकए जाएोंगे।
538. क्लैडेड नमूना.- विवनयम 532 के अनुसार क्लैड नमूनो ोंका मूल्ाोंकन वकया जाएगा ।
539. नामंजूरी से पूिष अवतररि परीिण- (1) (क) यवद 535 से 538 विवनयमो ोंके अनुसार जाोंच वकया
गया कोई भी परीिण टुकड़ा वनवदयष्ट स आिश्यकताओ ों को पूरा करने में विफल रहता है तो नमूने में से एक
और िेल्ड को काटा जा सकता है और उस पर परीिण को पुनः वकया जा सकता है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 473
(ख) यवद कोई जाोंच वकया गया परीिण टुकड़ा आिश्यक मानको ोंको पूरा नही ोंकरता है, तो पयायप्त
रोटरेवनोंग के बाद एक और िेल्ड तैयार वकया जाएगा, और उपरोि विवनयमो ोंकी प्रवहृया पुनः दोहराई
जाएगी।
(ग) यवद दुबारा वकया गया िेल्ड भी आिश्यक मानक को पूरा नही ोंकरता है, तो िेल्डर को प्रमाण पि
के वलए योग्य नही ोंमाना जाएगा।
(2) िेल्डर प्रमाणपि वीकीकृ त करने से इन्कार करने का सिम प्रावधकारी का वनणयय अोंवतम होगा।
भाग-7
540. अंक देने की प्रवहृया.- (1) (क) प्रपि XXI के अनुसार अोंक वदए जाएोंगे।
(ख) मौक्तखक या वलक्तखत परीिा में कम से कम 60 प्रवतशत अोंक प्राप्त करने िाले और व्यािहाररक
परीिणो ोंमें कम से कम 75 प्रवतशत से कम अोंक प्राप्त करने िाले अभ्यवथययो ोंको प्रमाण पि के वलए योग्य
माना जाएगा, बशते वक बेंड परीिण में सोंतो जनक पाए जाएों और यवद कोई अभ्यथी मौक्तखक या वलक्तखत
परीिा में अनुत्तीणय हो जाता है परोंतु प्रायोवगक परीिा में उत्तीणय हो जाता है, तो उसकी मौक्तखक परीिा या
वलक्तखत परीिा, प्रायोवगक परीिा की तारीख से बारह सप्ताह की अिवध के भीतर पुन: ली जा सकती है,
और यवद िह पुन: परीिा में कम से कम 60 प्रवतशत अोंक प्राप्त कर लेता है तो, उसे प्रमाण पि के वलए
योग्य माना जाएगा।
(2) यह प्रपि सिम प्रावधकारी द्वारा सत्यावपत वकया जाएगा।
541. प्रमाणपत्र देने की प्रवहृया.- (1) विवनयम 522 में उक्तिक्तखत सैद्ाोंवतक परीिाओ ोंऔर विवनयम
523 से 526 में उक्तिक्तखत प्रायोवगक परीिाओ ोंको सफलतापूियक पूरा करने पर िेल्डर को उसके द्वारा
पास की गई परीिाओ ोंकी सीमा तक प्रपि-II में एक प्रमाण पि प्रदान वकया जा सकता है।
(2) (क) िेल्डर अथिा िेक्तल्डोंग ऑपरेटर जो प्लेटो ोंमें ग्रूि िेल्ड के वलए परीिा पास करते हैं, उन्हें
प्लेटो ोंमें वफलेट िेल्ड बनाने के वलए योग्य माना जाएगा।
(ख) िेल्डर अथिा िेक्तल्डोंग ऑपरेटर जो वफलेट िेल्ड के वलए परीिा पास करते हैं, िे के िल
वफलेट िेल्ड बनाने के वलए योग्य होगों े।
(ग) इस सोंबोंध में राज्य सरकार द्वारा बनाए गए वकसी भी वनयम के तहत वकसी भी उद्देश्य के
वलए जारी वकया गया कोई भी प्रमाण पि, इस अध्याय के तहत उसी उद्देश्य के वलए जारी
वकया गया माना जाएगा और उि वनयमो ोंके तहत की गई कोई भी कारयिाई इस अध्याय
के तहत की गई कारयिाई समझी जाएगी।
542. अवभलेखो ंका रखरखाि.- (1) बॉयलरो ोंऔर स्टीम-पाइपो ोंका प्रत्येक विवनमायता या मरम्मत
करने िाला, बॉयलरो ोंऔर स्टीम-पाइपो ोंकी िेक्तल्डोंग और मरम्मत में लगे सभी िेक्तल्डोंग कवमययो ोंका, ऐसे
प्रत्येक िेल्डर और िेक्तल्डोंग ऑपरेटर का वििरण और उनके द्वारा वकए गए कायय का ररकॉडय बनाए रखेगा।
माोंगे जाने पर, ऐसा ररकॉडय वनरीिण प्रावधकारी अथिा सिम व्यक्ति को प्रस्तुत वकया जाएगा।474 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) िेल्डरो ोंअथिा िेक्तल्डोंग आपरेटरो ोंके मामले में, जो वीकयों की वजम्मेदारी के तहत िेक्तल्डोंग का कायय
करते हैं, उपरोि ररकॉडय उनके द्वारा वीकयों रखा जाएगा।
543. िेल्डरो ंअथिा िेल्पल्डंग ऑपरेटरो ंकी परीिा के वलए शुल्क.- िेल्डरो ोंया िेक्तल्डोंग ऑपरेटरो ोंकी
परीिा के वलए शुल्क विवनयम 331 के अनुसार होगा।
544. शाल्पि.- शाक्तस्त विवनयम 332 के अनुसार होगी।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 475
अध्याय - 14
छोटे औद्योवगक बॉयलर
भाग-1
सामान्य
545. कायष िेत्र - यह अध्याय छोटे औद्योवगक बॉयलरो ों के वडजाइन, वनमायण, वनरीिण, पोंजीकरण,
प्रचालन और रख-रखाि पर लागू होगा।
546. इस अध्याय के प्रयोजन हेतु, "छोटे औद्योवगक बॉयलर" में वनम्नवलक्तखत शावमल होगों े-
(क) शेल प्रकार का बॉयलर जो 7 वकग्रा/सेमी2 (जी) तक के दाब में अपने बाहरी उपयोग के वलए भाप
उत्पन्न करता है और वजसकी िॉल्ूमेवटरक िमता 25 लीटर से अवधक होती है (ऐसी िमता को फीड चेक
िाल्व से मुख्य स्टीम स्टॉप िाल्व तक मापा जाता है), लेवकन ऐसे ताप स्रोत से गमय वकए जाने और बॉयलर
से जुड़े सभी दाब भागो ोंकी िॉल्ूमेवटरक िमता सवहत 500 लीटर से अवधक नही ोंहोनी चावहए; या
(ख) कॉयल प्रकार या िन्ऱ थ्रू बॉयलर या िॉटर ट्यूब बॉयलर जो ऊपर खोंड (क) में वनवदयष्ट स शतों को पूरा
करता हो, वसिाय वनम्नवलक्तखत के -
(i) दाब की सीमा 12 वकग्रा/सेमी 2 (जी) होगी, और
(ii) िमता 150 लीटर से अवधक नही ोंहोनी चावहए;
बशते वक खोंड (क) और (ख) की सोंयुि विशे ताओ ों िाले बॉयलरो ों के मामले में, वडजाइन दाब 7
वकग्रा/सेमी 2 (जी) तक सीवमत होगा और विशे दाब िाले भागो ों की िॉल्ूमेवटरक िमता ऊपर वदए गए
सोंबोंवधत खोंडो ोंमें विवनवदयष्ट स सीमा से अवधक नही ोंहोगी, जो कु ल 500 लीटर के अध्यधीन है।
भाग-2
वपछले अध्यायो ंमें वनधाषररत मानक शतों से वकस सीमा तक बदलाि की अनुमवत है
547- मानको ंमें बदलाि- छोटे औद्योवगक बॉयलरो ों के वलए इन विवनयमो ों के वपछले अध्यायो ों में वदए गए
मानक शतों में बदलाि की अनुमवत प्रदान की जाएगी जैसावक विवनयम 548 से 554 में प्रािधान वकया गया
है।
548. सामग्री – (1) इस अध्याय के अोंतगयत वकए गए प्रािधानो ों को छोड़कर, छोटे औद्योवगक बॉयलरो ों के
वनमायण में प्रयुि सामग्री, इन विवनयमो ोंके अध्याय-2 में वकए गए प्रािधानो ोंके अनुरूप होगी।
2 (क) बॉयलरो ों के वनमायण में उपयोग की जाने िाली स्टील प्लेट आईएस: 2062 पूणयतः वकल्ड या समतुल्
होनी चावहए और शेल ि हैडटस के वलए प्लेट की मोटाई 6 वममी से कम नही ोंहोनी चावहए और ट्यूबो ों
को रोल करने के वलए ट्यूब शीट के रूप में हैड कम से कम 8 वममी मोटाई का होना चावहए।476 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) आईएस: 2062 की स्टील प्लेटटस के वलए प्रपि V के भाग-क में वदए गए स्टील वनमायता से प्रमाण-पि
की आिश्यकता नही ोंहोती है, बशते वक लागू विवनयमो ोंमें विवनवदयष्ट स अन्य सभी प्रमाणन शतों का अनुपालन
वकया गया हो।
(3)(क) बॉयलरो ों के पुजों का ऊपरी भाग जब लौ के सीधे प्रभाि के सोंपकय में नही ोंआते हैं, तब उन्हें कास्ट
आयरन या मैलीऐबल आयरन से बनाया जाए, बशते वक िे इन विवनयमो ों की अन्य शतों का अनुपालन
करते हो।ों
(ख) कास्ट आयरन या मैलीऐबल आयरन के सोंबोंध में अनुमत दबाि, सामग्री की तन्यता िमता पर
आधाररत होगा वजसमें सुरिा का कारक 4.5 से कम नही ोंहोगा।
549. वडजाइन, वनमाषण, कायषकु शलता और अवधकतम अनुमत कायषशील दाब की गणना करने की
विवध- (1) (क) िहाों जहाों अन्यथा विवनवदयष्ट स वकया गया है, को छोड़कर, वनमायण कायय िही वकया जाएगा जो
इन विवनयमो ोंके पूियिती अध्यायो ोंके प्रासोंवगक प्रािधानो ोंमें वनधायररत है।
(ख) फ्यूजन िेल्डेड बॉयलर के मामले में न तो स्टरेस छोड़ने की और न ही िेल्ड वकये हुए ज्वाइोंटटस की
रेवडयोग्राफी की आिश्यकता होती है।
(2) (क) छोटे औद्योवगक बॉयलरो ोंमें, अनफ्लैंर्ज् स्टील ट्यूब प्लेट शेल में डाला जा सकता है और इसे
पूरी मोटाई के वलए िेल्ड वकया जा सकता है जैसा वक नीचे इस विवनयमन के वचि 14/1 में
वदखाया गया है, वजसमें एक वफलेट िेल्ड है वजसका नली, शेल या ट्यूब शीट की मोटाई के
1¼ गुना से कम नही ोंहै, इनमें से जो भी छोटा हो।
वचत्र 14/1
(ख) फ्लैंर्ज् िेल्ड की हुई ट्यूब शीट की न्यूनतम मोटाई 10 वममी होनी चावहए।
(ग) विदटयुत रूप से तप्त भाप बॉयलरो ों के ताप तन्तुओ ों का तापमान इस प्रकार वनयोंवित वकया
जाएगा वक यह 650°C से अवधक न हो।
(3) (क) ट्यूब स्टील से वनवमयत होने चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 477
(ख) (i) ट्यूबो ोंके वछद्रो ोंको शेल बट स्टरैप्स के साथ पूणय आकार में वडरल वकया जाएगा और एोंड
बोल्ट् पोवजशन में ऊपर होगा या पूणय आकार से व्यास में कम से कम 13 वममी छोटा वछद्र
वकया जा सकता है और वफर एक घूणयन कटर के साथ पूणय आकार में वडरल, रीम्ड या पूणय
आकार में तैयार वकया जा सकता है।
(ii) तेज वकनारो ों और वचप्स को हटाया जाएगा, प्लेटटस और बट स्टरैप्स ररअसेम्बल मेटल को
धातु में वपन वफवटोंग और टेक बोल्ट् के साथ वफर से जोड़ा जाएगा।
550.वनरीिण और परीिण - छोटे औद्योवगक बॉयलरो ोंके वनमायण के दौरान वनरीिण प्रावधकारी द्वारा
वनमायण वनरीिण के अध्यधीन होगा और बॉयलरो ोंका वनरीिण विवनयमन 551 और 552 में वदए गए चरणो ों
के आधार पर वकया जाएगा।
551. शेल प्रकार के बॉयलर: शेल प्रकार के बॉयलरो ों का वनरीिण वनम्नवलक्तखत चरणो ों के आधार पर
वकया जाएगा, अथायतट:-
(i) सामग्री की पहचान और वनरीिण;
(ii) िेक्तल्डोंग और वडरवलोंग पूरा करने के बाद प्रत्येक घटक का वनरीिण;
(iii) बॉयलर की असेंबली;
(iv) हाइडरोवलक परीिण;
(2) बॉयलर को पूणयतः या आोंवशक रूप से िेल्ड वनमायण के मामले में, हाइडरोवलक परीिण दाब
बॉयलर के वडजाइन दाब के दो गुना के बराबर होगा।
(3) रूट और फे स बेंड परीिण करने के वलए वनमायता द्वारा एक परीिण कू पन प्रदान वकया
जाएगा।
552. कॉयल प्रकार के बॉयलसष, िन्स थ्रू बॉयलर, और िाटर ट्यूब बॉयलर: (1) कॉयल प्रकार के
बॉयलसय, िन्ऱ थ्रू बॉयलर, और िाटर ट्यूब बॉयलर का वनरीिण वनम्नवलक्तखत रूप से वकया जाएगा नामत:-
(i) सामग्री की पहचान करना।
(ii) हाइडरोवलक परीिण,
(2) हाइडरोवलक परीिण के वलए दाब बॉयलर के वडजाइन दाब का दो गुना होगा ।
553. प्रमाण पत्र और वनमाषता की टैम्प- (1) प्रमाण पि और वनमायता की स्टैम्प इन विवनयमो ोंके
अध्याय -1 के प्रािधानो ोंके अनुरूप होगी ।
(2) यवद बॉयलर के छोटे आकार के कारण बॉयलर प्लेट पर सभी सूचनाओ ों को स्पष्ट स रूप से स्टाम्प नही ों
वकया जा सकता है, तो बॉयलर के साथ वनमायता के प्रमाण पि में आिश्यक वििरण शावमल होगों े,478 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
लेवकन सभी मामलो ोंमें बॉयलर पर नाम, कायय सोंख्या और वनमायण के ि य की स्टैम्प लगाई जानी चावहए
या प्रदवशयत की जानी चावहए।
भाग-3
554. िाल्व, गेज, वफवटंग और फीड आपूवतष- (1) (क) (i) प्रत्येक बॉयलर में कम से कम 25 वममी
व्यास के कम से कम 3 िाश िॉश प्लग लगे होने चावहए जो शेल के मुख के पास तल में स्क्रू वकये जाएोंगे।
(ii) क्लोर्ज् वसस्टम टाईप बॉयलरो ों को ररमूिेशन आोंतररक इलेक्तररक वहवटोंग एवलमेंट द्वारा वकया जाता है,
तो इन एवलमेंट की ओपवनोंग को जब ये साफ-सफाई के उद्देश्य के वलए उपयुि, तो इसे िॉश आउट
ओपवनोंग से बदला जा सकता है।
(ख) (i) 300 वममी तक के आोंतररक व्यास िाले बॉयलरो ों में सफाई के वलए 25 वममी की दो ओपवनोंग हो
सकती हैं वजनमें से एक का उपयोग ब्लो ऑफ िाल्व को लगाने के वलए वकया जाएगा।
(ii) जहाों भी सोंभि हो ओपवनोंग, एक दूसरे के विपरीत होने चावहए।
(iii) बॉयलर में सभी थ्रेडेड ओपवनोंग को िेक्तल्डोंग से सुदृा वकया जाएगा और यवद आिश्यक हो, तो उसमें
चार पूणय थ्रेड लगाए जाएोंगें।
(ग) (i) वनरीिण और सफाई के वलए लगाए गए हटाए जाने योग्य किर फलैंजे की वडजाइन िाले इलेक्तररक
बॉयलरो ोंको िॉशआउट ओपवनोंग और िॉशआउट प्लग के साथ वफट करने की आिश्यकता नही ोंहै।
(ii) िन्ऱ थ्रू बॉयलरो ोंके वलए लेिल गेज की आिश्यकता नही ोंहोती है।
(2) प्रत्येक बॉयलर के वलए कम से कम एक फीड पोंप या अन्य फीवडोंग वडिाइस उपलब्ध करिाया जाएगा,
वसिाय इसके वक िह उस बॉयलर को फीड कराने के वलए पानी के मेन के रीइोंग प्रेशर से जुड़ा हो या जहाों
भाप जनरेटर वबना भाप के वनष्क यण (क्लोर्ज् वसस्टम) के साथ सोंचावलत हो। बाद के मामले में, फीवडोंग
वडिाइस के बदले, बॉयलरो ों को फीड के वलए एक उपयुि कनेक्शन या ओपवनोंग प्रदान वकया जाएगा।
ऐसे कनेक्शन 13 वममी व्यास से कम के नही ोंहोने चावहए।
(3) (क) प्रत्येक बॉयलर में अपेवित माउोंवटोंग और वफवटोंग वफट वकया जाएगा, जैसा वक इन विवनयमो ों के
अध्याय-5 में प्रािधान वकया गया है और िे 7 वकलो.ग्रा./ सेमी2 (जी) के वलए उपयुि ठोस सोंरचना के
होगों े।
(ख) सेफ्टी िॉल्व को छोड़कर इन सभी वफवटोंग को वफवटोंग के विवनमायताओ ों द्वारा वीकयों प्रमावणत वकया
जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 479
4 (क) फीड पाइप में एक चेक िाल्व और एक स्टॉप िॉल्व लगे होने चावहए जो उस पाइप के आकार से
कम न हो।
(ख) ब्लो ऑफ कनेक्शन के शेल में उसी आकार के ओपवनोंग के माध्यम से बॉयलर तक फीड िाटर
पहुोंचाया जा सकता है।
5 (क) प्रत्येक बॉयलर ब्लो ऑफ कनेक्शन से लैस होगा जो आकार में 18 वममी से कम का नही ों होना
चावहए, जो बॉयलर पर दाब होने पर व्यािहाररक रूप से सबसे कम पानी के स्थान से बॉयलर के पानी को
वनकालने के वलए हो।
(ख) पानी के कॉलम, िॉटर गेज ग्लास या गेज कॉक के वलए आिश्यक ओपवनोंग या कनेक्शन के माध्यम से
फीड िाटर का प्रचालन नही ोंवकया जाएगा ।
(6) (क) एक कॉयल टाइप या िन्ऱ थ्रू बॉयलर के अलािा हर बॉयलर में पानी के स्तर को वनधायररत करने
के वलए दो गेज ग्लास वजनकी लोंबाई 150 वममी से कम नही ोंहोगी, लगे होने चावहए।
(ख) बॉयलर में पानी के गेज का सबसे कम वदखाई देने िाला वहस्सा न्यूनतम वीकीकायय जल स्तर से कम से
कम 25 वममी ऊपर होना चावहए।
7 (क) ऊध्वायधर बॉयलरो ों का न्यूनतम वीकीकायय जल स्तर शेल के तल से या ट्यूब शीट के ऊपर से शेल की
ऊों चाई के एक वतहाई वबोंदु पर होना चावहए।
(ख) जहाों बॉयलर आोंतररक फनेस से सुसक्तित है, िहाों जल स्तर फनेस ट्यूब शीट के ऊपर ट्यूबो ों की
लोंबाई के एक वतहाई से कम नही ोंहोना चावहए।
8 (क) िाष्प दबाि गेज का अपना डायल होना चावहए, जो बॉयलर के अवधकतम अनुमत काययशील दाब के
दोगुने से कम नही ोंहोना चावहए।
(ख) डायल का व्यास कम से कम 100 वममी और दाब गेज को जोड़ने िाला पाइप न्यूनतम 10 वममी का
होना चावहए और इसका कनेक्शन साइफन के माध्यम से वकया जाना चावहए।
9 (क) िाष्प दाब को कम करने के वलए प्रत्येक बॉयलर में दो सुरिा िाल्व लगे होने चावहए। िाल्वो ों का
व्यास 13 वममी से कम नही ोंहोना चावहए।
(ख) सुरिा िाल्व की न्यूनतम ररलीविोंग िमता इतनी होनी चावहए वक िह बॉयलर द्वारा उत्पन्न सभी िाष्प
को वनकालने के वलए पयायप्त हो तावक बॉयलर के अवधकतम अनुमत काययशील दाब से 10 प्रवतशत अवधक
दाब तक बाने न वदया जाए।
(ग) सुरिा िाल्व वबना वकसी अनािश्यक मध्यिती पाइप या वफवटोंग के वकसी भी अन्य भाप कनेक्शन से
वीकतोंि रूप से बॉयलर से जुड़ा होगा। इस तरह मध्यिती पाइप या वफवटोंग, यवद अपररहायय हो, तो एक ही
व्यास के टी वफवटोंग के सोंबोंवधत फे स टू फे स आयाम से अवधक लोंबा नही ोंहोना चावहए और िहाों से इसके
द्वारा न्यूनतम वनकासी कम से कम िाल्व इनलेट के बराबर होना चावहए।
(10) सुरिा िाल्व और बॉयलर के बीच वकसी भी प्रकार का कोई ऐसा िाल्व नही ों लगाया जाना चावहए,
सुरिा िाल्व से िायुमोंडल तक वनकासी पाइप पर न लगे हो।ों480 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(11) इलेक्तररक से तप्त होने िाले बॉयलरो ों को पयायप्त हृॉस सेक्शन के लीड के साथ प्रभािी ढोंग से अवथिंग
वकया जाना चावहए।
555. पंजीकरण, प्रचालन और रख-रखाि (1) (क) अवधवनयम की धारा 12 की उप-धारा (2) के तहत
पोंजीकरण के वलए अपेवित शुल्क विवनयम 304 की तावलका 8/2 के अनुसार होना चावहए ।
(ख) प्रमाण-पि के निीकरण के वलए िाव यक वनरीिण शुल्क विवनयम 305 की तावलका 8/3 के
अनुसार होना चावहए ।
(2) छोटे औद्योवगक बॉयलरो ों के विवनमायण और परीिण के प्रमाण-पि को प्रपि XXII के अनुसार जारी
वकया जाना चावहए।
(3) इन बॉयलरो ों को चलाने िाले ऑपरेटर के पास मैवटरक या उसके समतुल् न्यूनतम शैिवणक योग्यता
होनी चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 481
अध्याय-15
बॉयलर के वलए फीड िॉटर
556. कायष िेत्र- यह अध्याय फीड िॉटर और बॉयलर िॉटर के वलए विवनदेशो ोंको वनधायररत करता है-
(क) कम और मध्यम दबाि िाले बॉयलरो ों(60 वकग्रा/सेमी 2 (जी) तक के बॉयलरो ोंके प्रचालन के वलए)
(ख) 60 वकग्रा/सेमी 2 (जी) से अवधक दाब पर प्रचालन करने िाले बॉयलरो ोंहेतु, जल की बेहतर गुणित्ता के
वलए आईएस:10496 को अपनाया जाना चावहए।
557. आिश्यकताएं- तावलका के कॉलम 6 और 7 में दी गई विवधयो ोंद्वारा परीिण वकए जाने पर जल को
इस अध्याय की तावलका 15/1 में दी गई आिश्यकताओ ोंका अनुपालन करना चावहए ।
558. सैम्पवलंग – भारतीय मानक ब्यूरो द्वारा जारी आईएस: 3025 के भाग-2 में उक्तिक्तखत सामान्य
वनदेशो ों का पालन करते हुए सैम्पवलोंग की जानी चावहए और विशे रूप से, वनम्नवलक्तखत वबोंदुओ ों को ध्यान
में रखा जाना चावहए-
(क) सैंपवलोंग कॉक पर एक स्टेनलेस स्टील या मोनेल मेटल कॉयल लगाई जानी चावहए तावक जल के नमूने
का तापमान िायुमोंडलीय दाब पर िथनाोंक से काफी नीचे हो और िाष्प में फ्लैवशोंग के कारण िातन और
सघनता का कोई खतरा न हो; तथा
(ख) बॉयलर फीड पोंप की आपूवतय से फीड िॉटर के नमूने, ऊपरी डरम से बॉयलर िॉटर के नमूने और
सोंघनन वनष्क यण पोंप की आपूवतय से सोंघनन के नमूने एकि वकए जाने चावहए।
559. परीिण की विवधयां- परीिण आईएस: 3025 और आईएस: 3550 के उपयुि खोंडो ों में वदए गए
प्रािधानो ोंऔर इस अध्याय की तावलका 15/1 में विशे ताओ ों के सामने दशायई गई विवधयो ोंके अनुसार वकए
जाने चावहए।
तावलका 15/1 : वनम्न और मध्यम दाब िाले बॉयलरो ंके वलए फीड िॉटर और बॉयलर िॉटर की
रासायवनक अपेिाएं
(विवनयम 557 और 559)
बॉयलर दाब की अपेिा परीिण की विवध
हृ. विशे ताएों (कॉलम सों. का
स. सोंदभय लें)
20 21 से 39 40 से 60 आईएस: आईए
वकग्रा/सेमी 2 (जी) वकग्रा/सेमी 2 वकग्रा/से 3550+ स:
तक (जी) हेतु मी 2 (जी) 3025*
हेतु
(1) (2) (3) (4) (5) (6) (7)
(i) फीड िॉटर482 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(क) अवधकतम 5 2 शून्य - 16.1
कु ल कठोरता
(CaCO
2
के रूप में),
वमलीग्राम/ली.,
(ख) पीएच मान 8.8 से
8.8 से 9.5 8.8 से 9.5 - 8
9.5
(ग) अवधकतम
घुली हुई
- 0.5 0.5 16 -
ऑक्सीजन,
वमलीग्राम/ली.
(घ) अवधकतम
वसवलका
(SiO के रूप - 0.5 0.5 16 -
2
में),
वमलीग्राम/ली.
(ii) बॉयलर िॉटर
(क) अवधकतम
कु ल िारीयता
φ (CaCO 700 500 300 - 13
3
के रूप में),
वमलीग्राम/ली.
(ख) अवधकतम
काक्तस्टक
िारीयता
350 200 60 - 15
(CaCO
3
के रूप में),
वमलीग्राम/ली.
(ग) पीएच का 9.0 से
9.0 से 12.0 9.0 से 12.0 - 8
मान 11.0
(घ)β अिवशष्ट स
सोवडयम
सल्फाइट
- 30 से 50 20 से 30 - 21
(Na SO के
2 3
रूप में)
वमलीग्राम/ली.
(ङ) अिवशष्ट स
0.1 से 0.5
हाइडरावजन 0.1 से 1 0.05 से
(यवद डाला 26 -
(N H के रूप (यवद डाला गया है) 0.3
2 4
गया है)
में),[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 483
वमलीग्राम/ली.
(च) फॉस्फे ट
(PO के रूप
4
में) वमलीग्राम/ 20 से 40 15 से 30 5 से 20 14 -
लीटर (यवद
डाला गया हो)
(छ) अवधकतम
कु ल घुवलत
3500 α 2500 1500 9 12
ठोस
वमलीग्राम/ली.,
(ज) अवधकतम
वसवलका (SiO
2
- 15 15 16 30
के रूप में),
वमलीग्राम/ली.
नोट:
1. ररकिरी बॉयलर: उपयोग वकए गए बॉयलर फीड िॉटर को पूरी तरह से डी-वमनरलाइर्ज् वकया
जाना चावहए और बॉयलर फीड िॉटर और बॉयलर िॉटर को 60 वकग्रा/सेमी 2 (जी) और
उससे अवधक पर उच्च दाब िाले बॉयलरो ों के अनुसार अनुकू वलत वकया जाना चावहए (आईएस:
4343 देखें)।
2. जब फीड िॉटर हीटर, कॉपर या कॉपर अलॉय के बने होते हैं, तो फीड िॉटर का पीएच 8.5 और
9.2 के बीच बनाए रखा जाना चावहए, जबवक जब फीड िॉटर हीटर, आयरन के बने होते हैं, तो
फीड का पीएच 8.5 और 9.5 के बीच बनाए रखा जाएगा।
3. बॉयलर िॉटर में वसवलका: टबायइनो ों की िाष्प के वलए वसवलका की कम साोंद्रता हेतु परामशय वदया
जाएगा, वजसके वलए सामान्य तौर पर िाष्प में 0.02 वमलीग्राम/लीटर से कम वसवलका अपेवित है।
*उद्योग में उपयोग वकए जाने िाले जल के वलए वनयवमत वनयोंिण हेतु परीिण की विवध।
+ उद्योग में उपयोग वकए जाने िाले जल के वलए नमूना लेने और परीिण (भौवतक और
रासायवनक) की विवध।
φ कु ल िारीयता प्राथवमकता के आधार पर कु ल घुवलत ठोसो ों का लगभग 20 प्रवतशत होना
चावहए।
β यवद सोवडयम सल्फाइट के अलािा अन्य अपचायको ों का उपयोग वकया जाता है तो यह लागू
नही ोंहोगा।
मापदोंडो ोंके आधार पर शेल प्रकार के बॉयलरो ोंके वलए, सीमाओ ोंमें छू ट दी जा सकती है।484 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय - 16
हीट एक्सचेंजसष और प्रेशर िेसल्स
भाग-1
560. लागू होना- (1) यह अध्याय, 3.5 वकग्रा/सेमी 2 (जी) से ऊपर प्रचावलत होने िाले
स्टीम एक्यूमुलेटर, स्टीम कॉयल एयर प्रीहीटर, हाई प्रेशर (एचपी) हीटर, डीएरेटर और ब्लो
डाउन टैंक पर लागू होगा।
(2) कोई भी भाप खपत करने िाला उपकरण जहाों भाप सोंघवनत होती है या िातािरण में
वनकाली जाती है, इस अध्याय के तहत किर नही ों वकया जाना चावहए।
561. वनमाषण और कायष कु शलता- वनमायण और काययकु शलता विशे प्रकार के वनमायण के
वलए प्रासोंवगक विवनयमो ों की आिश्यकताओ ों के अनुरूप होने चावहए।
562. सामग्री- इन िेसिो ों के वनमायण में प्रयुि सामग्री को अध्याय -2 के प्रासोंवगक
विवनयमो ों का अनुपालन करना चावहए।
563. िेल्पल्डंग हेतु उपभोग्य ििुएं- िेक्तल्डोंग हेतु उपभोग्य िस्तुओ ों को अध्याय-2 के लागू
प्रािधानो ों का अनुपालन करना चावहए।
564. ट्यूब और पाइप- ट्यूब और पाइप को अध्याय-2 के प्रासोंवगक प्रािधानो ों का अनुपालन
करना चावहए।
565. ताप शोधन- विवनयम 123 के अनुसार सभी फ्यूजन िेल्डेड िेसि को दबाि मुि
करने के वलए ताप शोधन की प्रवहृया की जानी चावहए।
भाग-2
िेल्ड से वनमाषण वकए हुए िेसल्स के कायषशील दबाि का वनधाषरण
566. शेल्स – काययशील दबाि की गणना, अध्याय 4 के विवनयम 169 के अोंतगयत
उक्तिक्तखत समीकरण (4/1) के अनुसार की जानी चावहए।
567. वडश एंड प्लेट स - अितल पि पर दबाि के अध्यधीन वडश एोंड प्लेटटस का
अवधकतम काययशील दबाि अध्याय 4 के विवनयम 177 के समीकरण (4/10) के अनुसार
वनधायररत वकया जाना चावहए ।
568. फ्लैट एंड प्लेट स - फ्लैट एोंड प्लेटटस का अवधकतम काययशील दबाि अध्याय-3 में
उपयुि विवनयमो ों के अनुसार वनधायररत वकया जाना चावहए।
569. वगथष फ्लैंज - (1) गैर-मानक बोल्ट् फ्लैंज कनेक्शन जब उपयोग वकया जाता है, तो
उसे इन विवनयमो ों की आिश्यकताओ ों को पूरा करना होगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 485
(2) फ्लैंज के वडजाइन और वनमायण में गैस्के ट (सामग्री, प्रकार और आयाम), फ्लैंज
फै वसोंग, बोक्तल्ट्ोंग, हब अनुपात, फ्लैंज की चौड़ाई और फ्लैंज की मोटाई का चयन करना
शावमल होगा।
(3) फ्लैंज का आयाम ऐसा होना चावहए वक फ्लैंज में गणना वकया गया दाब अनुमत फलैंज
दबाि से अवधक न हो।
570. मानक फ्लैंज - हीट एक्सचेंजर में उपयोग वकए जाने िाले मानक फ्लैंज विवटश मानक
(बीएस), यूरोपीय मानक (ईएन), अमेरीकन सोसायटी ऑफ मेके वनक्ल इोंजीवनयसय
(एएसएमई) और बॉयलर एिों प्रेशर िेसेल कोड तथा ट्यूबलर एक्सेंजर मैन्यूफै क्चरसय
एसोवसएशन (टीईएमए) जैसे कोड या मानको ों का अनुपालन करेंगे, वजन्हें सामान्य तौर पर
औद्योवगक रूप से उन्नत देशो ों में उपयोग वकया जाता है।
571. बोल्ट और ट ड – (1) िेसल के कु छ वहस्सो ों जैसे शेल, एोंड प्लेटटस, ट्यूब प्लेटटस
आवद को जोड़ने िाले बोल्ट् और स्टटड स्टील के बने होने चावहए।
(2) बोल्ट् और स्टटड के वलए अवधकतम काययशील दबाि की गणना वनम्नवलक्तखत समीकरण के
अनुसार की जानी चावहए:
N x C 1.28 2
P = ------- D - ----- समीकरण (16/1)
A n
जहाों,
P अवधकतम अनुमत काययशील दाब टन/िगय इोंच में,
D थ्रैड पर बोल्ट् या स्टटड का व्यास इोंच में है,
N वहस्से को सुरवित करने िाले बोल्ट् या स्टटड की सोंख्या है,
n प्रवत इोंच स्क्रू के थ्रैड की सोंख्या है,
C जहाों थ्रैड के ऊपर का व्यास 19 वममी से कम है, 28 टन/िगय इोंच न्यूनतम
अोंवतम तन्यता तनाि स्टील बोल्ट् या स्टटड के वलए 4,700,
C जहाों थ्रैड के ऊपर का व्यास 19 वममी से कम है, 30 टन/िगय इोंच न्यूनतम
अोंवतम तन्यता तनाि स्टील बोल्ट् या स्टटड के वलए 5,100,
C जहाों थ्रैड के ऊपर का व्यास 19 वममी से कम नही ों है, 35 टन/िगय इोंच
न्यूनतम अोंवतम तन्यता तनाि स्टील बोल्ट् या स्टड के वलए 5,600,
C 28 टन/िगय इोंच न्यूनतम अोंवतम तन्यता तनाि जहाों थ्रैड के ऊपर का व्यास
19 वममी से कम नही ों है तथा 22 वममी से अवधक नही ों है, िाले स्टील बोल्ट्
या के स्टटड के वलए 5,600।
C 28 टन/िगय इोंच न्यूनतम अोंवतम तन्यता तनाि जहाों थ्रैड के ऊपर का व्यास
22 वममी से अवधक है, िाले स्टील बोल्ट् या स्टटड के वलए 7,000।486 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
‘A’ िगय इोंच में बोल्ट् या स्टटड द्वारा समवथयत सतह िाला िेिफल है। ज्वाइोंटटस फ्लैंज के
वलए िेि को बोल्ट् की वपच लाइनो ों और फ्लैंज के आोंतररक वकनारे के बीच मध्य-मागय तक
बााने के वलए ले जाया जाएगा, वजसके द्वारा भाग सुरवित है।
भाग-3
572. ट्यूब - एक साथ आोंतररक और बाहरी दोनो ों तरह के दाब के अधीन कायय करने
िाली ट्यूबो ों के मामले में, ट्यूबो ों की मोटाई अध्याय 12 के विवनयम 471 के समीकरण
12/12 और समीकरण 12/13 द्वारा वीकतोंि रूप से वनधायररत की जाने िाली मोटाई से अवधक
होनी चावहए ।
573. वडश एंड प्लेट स- वडश एोंड प्लेटटस का आकार विवनयम 174 की अपेिाओ ों के
अनुरूप होने चावहए।
574. एंड प्लेट अटैचमेंट- ये अध्याय-10 या अध्याय-12 में वदए गए वचिो ों में से वकसी भी
एक का अनुपालन करेंगे।
575. ट्यूब प्लेट स- ट्यूब प्लेटो ों की न्यूनतम मोटाई विवनयम 472 की आिश्यकताओ ों का
अनुपालन करेंगी।
576. माउंवटंग के वलए टैंड पाइप, नोजल, पैड और सीवटंग तथा उनके अटैचमेंट-
माउोंवटोंग के वलए स्टैंड पाइप, नोजल, पैड और सीवटोंग तथा उनके अटैचमेंटटस प्रासोंवगक
विवनयमो ों के प्रािधानो ों का अनुपालन करेंगे।
577. U-ट्यूब- (1) हीट एक्सचेंजसय में उपयोग वकए जाने िाले U-ट्यूब को वनवमयत करने
के बाद ओिवलटी 10% से अवधक नही ों होनी चावहए।
(2) काबयन और अलॉय स्टील के U-ट्यूब वजनकी माध्य विज्या R = 5D (जहाों D = ट्यूब
का बाहरी व्यास) तक हो, को न्यूनतम 15 वमनट तक वभगोकर तनाि मुि वकया
जाना चावहए।
578. ट्यूब बंडल असेंबली- ट्यूब बोंडल असेंबली के बाधा रवहत प्रिेश की जाोंच करने के
वलए एक ररोंग गेज का उपयोग वकया जाएगा, वजसके बैफल का आोंतररक व्यास ट्यूब के
बाहरी व्यास (OD) + 1.5 वममी के बराबर होना चावहए।
579. ट्यूब से ट्यूब शीट ज्वाइंट स की प्रारंवभक विवशष्टता:
(1) ट्यूब को ट्यूब शीटटस से जोड़ने की विवध वनम्नवलक्तखत में से कोई एक होनी चावहए:
(i) के िल िमता का विस्तार (वबना िेक्तल्डोंग के );
(ii) िमता के साथ िेक्तल्डोंग और बहुत कम विस्तार, या
(iii) िमता का विस्तार और सील िेक्तल्डोंग।
(2) उपयुयि सभी तीनो ों प्रवहृयाओ ों को विवनमायता द्वारा वनयम के अनुकू ल प्रवहृया के
द्वारा पूरा वकया जाना चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 487
(3) (क) बॉयलर या बॉयलर घटक विवनमायता को ऐसे ज्वाइोंटटस वजनका विस्तार (चाहे
िेल्ड वकया हुआ और विस्ताररत वकया हुआ या के िल विस्ताररत) ज्वाइोंटटस की
मजबूती हेतु वकया गया है, के वलए वलक्तखत प्रवहृया तैयार करनी होगी।
(ख) बॉयलर या बॉयलर घटक विवनमायता को उन कारको ों को वनधायररत करना होगा जो
इन प्रवहृयाओ ों में सोंयुि पुनरािृवत्त को प्रभावित करते हैं।
(ग) इन प्रवहृयाओ ों में ग्रूव्स, सेरेशन, थ्रेडटस और कोसय मशीवनोंग प्रोफाइल जैसे
एन्हैंस्भेंटटस का विस्तृत वििरण या रेखावचि प्रदान वकया जाएगा।
(4) (क) िेल्ड वकए गए ज्वाोंइटटस को सुदृा करने के वलए, प्रत्येक प्रवहृया को पूरा
करने के वलए न्यूनतम आठ मॉक अप िेल्ड की आिश्यकता होती है।
(ख) मॉक अप असेंबली अवनिायय रूप से ट्यूब होल कॉक्तयफ़गरेशन और ट्यूब-टू-
ट्यूबशीट ज्वाोंइटटस वडजाइन के डुक्तप्लके ट होगों े।
(5) (क) मटेररयि ग्रुप (एम सों.िार), ट्यूब होल आकार, ट्यूब आकार और ट्यूब
शीट के साथ ट्यूब वफट उत्पादन अनुकरण करने िाले होगों े।
(6) परीिण ब्लॉक हृम वनम्नानुसार होना चावहए:
होि की न्यूनतम सोंख्या = 3-2-3 विकोणीय वपच हेतु
= 3-3-3 स्क्वायर वपच हेतु
मोटाई = ट्यूब शीट की मोटाई या 50 वममी, इनमें से जो भी कम हो।
(7) (क) ट्यूबशीट का अनुकरण करने िाला परीिण ब्लॉक आकार में गोलाकार, िगायकार
या आयताकार होगा, जो अवनिायय रूप से ट्यूब वपच वजओवमटरी की सामान्य अनुरूपता
िाला होगा।
(ख) इस परीिण असेंबली में ट्यूबो ों की एक सारणी शावमल होगी जो इस प्रकार की होगी
वक परीिण की जाने िाली ट्यूब सारणी के वजओवमटरी सेंटर में हो और जो समीपिती
ट्यूबो ों की कम से कम एक पोंक्ति से वघरी हुई हो।
(ग) परीिण ब्लॉक, असेंबली में पररधीय ट्यूबो ों के वकनारे से बाहर कम से कम एक
ट्यूबशीट वलगामेंट की दूरी का विस्तार करने िाले होगों े।
(8) परीिण ब्लॉक श्रेणी में सभी ट्यूब्स एक ही ग्रेड की सामग्री की होनी चावहए और इन्हें
समान प्रवहृयाओ ों का उपयोग करके लगाया जाना चावहए।
(9) (क) ट्यूब ज्वाइोंट के परीिण हेतु उपयोग की जाने िाली ट्यूब की लोंबाई के िल
परीिण उपकरण के वलए पयायप्त होनी चावहए।
(ख) परीिण वकए जाने िाले ट्यूब ज्वाइोंट से सटे ट्यूबो ों की लोंबाई, प्रमावणत वकए जाने
िाले परीिण ब्लॉक की मोटाई से कम नही ों होनी चावहए।
580. परीिण ब्लॉक के परीिण की प्रवहृया- (1) मॉक-अप िेल्ड को विवनयम 581 से
583 में वदए गए परीिणो ों के अध्यधीन हृमानुसार लगाया जाना चावहए और इसे लागू
वीकीकृ वत मानदोंडो ों को पूरा करना होगा।488 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
581. विजुअल जांच हेतु स्वीकृ वत मानदंड - (1) िेल्ड की एक्सेस योग्य सतहो ों की
विजुअल रूप से जाोंच की जानी चावहए, वजसके वलए वकसी भी प्रकार के आिधयन की
आिश्यकता नही ों होनी चावहए।
(2) िेल्ड को पूणयतः फ्यूजन को दशायना चावहए और इसमें ट्यूब िॉल के माध्यम से जलने
का प्रमाण नही ों होना चावहए, और इसमें कोई दरार या वछद्र नही ों होना चावहए।
582.वलल्पिड पेवनटरेंट से स्वीकृ वत मानदंड- वलक्तिड पेवनटरेंट तकनीको ों द्वारा जाोंच की गई
प्रवहृया और कायय-वनष्पादन परीिणो ों को तब अवीकीकायय माना जाना चावहए जब जाोंच में
वनम्नवलक्तखत विवनवदयष्ट स सीमाओ ों से अवधक कोई सोंके त प्रदवशयत होता हो:-
(i) प्रासोंवगक वलनीअर सोंके त
(ii) 5 वममी से अवधक प्रासोंवगक राउण्डेड सोंके त;
(iii) एक पोंक्ति में चार या उससे अवधक प्रासोंवगक राउण्डेड सोंके त वजनमें
1.5 वममी या उससे कम वममी की दूरी पर हो ों (ऐज टू ऐज)।
583. मैहृो-जांच हेतु स्वीकृ वत मानदंड – (1) मॉक अप िेल्ड को मैहृो जाोंच हेतु ट्यूब
के कें द्र के माध्यम से विभावजत वकया जाना चावहए।
(2) चार वनकली हुई सतहो ों को उपयुि एचेंट के द्वारा स्भूथ और ऐच वकया जाना चावहए
तावक िेल्ड और ताप प्रभावित जोन को स्पष्ट स रूप से पररभाव त वकया जा सके ।
(3)10X से 20X के आिधयन का उपयोग करते हुए, िेल्ड के उभरे हुए हृॉस सेक्शन
वनम्नवलक्तखत के अनुरूप होने चावहए;-
(i) वडजाइन द्वारा अपेवित न्यूनतम वलक पाथ डाईमेंशन;
(ii) वकसी भी प्रकार की दरार नही;ों
(iii) िेल्ड वडपॉवजट का ट्यूबशीट और ट्यूब िॉल फे स में पूणयतः फ्यूजन;
(iv) ज्वाइोंट के मूल से 0.4 वममी की दूरी तक िेल्ड वडपॉवजट का पूणयतः
प्रिेश; और
(v) वछद्र के कारण िेल्ड थ्रोट की मोटाई अपेवित न्यूनतम वलक पाथ की
मोटाई से कम नही ों होनी चावहए।
584. ट्यूब वथवनंग कै लकु लेशन– (1) मापे गए मानो ों के आधार पर, नीचे वदए गए
समीकरण का उपयोग करके ट्यूब वथवनोंग कै लकु लेशन की जानी चावहए।
(2) वथवनोंग 5% से 8% तक की सीमा में होनी चावहए।
(T-t) - (D - d) समीकरण (16/2)
% वथवनोंग = ----------------- x 100
2 x ट्यूब की मोटाई[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 489
जहाों,
T = विस्तार के बाद ट्यूब का आोंतररक व्यास
t = विस्तार से पहले ट्यूब का आोंतररक व्यास
D = ट्यूब शीट वछद्र का व्यास
d = ट्यूब का बाहरी व्यास490 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय-17
छोटे सौर बॉयलर
585. कायष िेत्र - यह अध्याय छोटे सौर बॉयलरो ों के वडजाइन, वनमायण, वनरीिण, पोंजीकरण, प्रचालन और
रख-रखाि पर लागू होगा।
भाग-1
पररभार्ा
586. सौर ररसीिर - सौर ररसीिर ऐसे उपकरण होते हैं जो भाप उत्पन्न करने के वलए सूयय से सौर
विवकरण ऊष्मा प्राप्त करते हैं।
587. छोटा सौर बॉयलर- (1) एक छोटे सौर बॉयलर में, सौर भाप उत्पन्न करने िाली प्रणाली मौजूद होनी
चावहए जो अपने बाह्य उपयोग के वलए भाप का उत्पन्न करती है, वजसमें सौर विवकरण को प्राप्त करने िाला
एपचयर िेि से ररसीिर िेि के िेिफल का साोंद्रण अनुपात 300 से कम होता है और वजसकी आयतवनक
िमता 25 लीटर से अवधक होती है।
2) एक प्राकृ वतक या कृ विम पररसोंचरण प्रकार का बॉयलर वजसमें ररसीिर सौर ताप प्राप्त करने िाला
उपकरण है जो 12 वकग्रा/सेमी 2 (जी) तक के दाब में भाप उत्पन्न करता है।
588. ताप सतह िेत्र - एक छोटे सौर बॉयलर का तापीय सतह िेि, प्राप्त करने िाले विवकरण के सोंपकय
में आने िाले ररसीिरो ोंका िेिफल होगा।
589. आयतवनक िमता - एक छोटे सौर बॉयलर की आयतवनक िमता, फीड चेक िाल्व से लेकर स्टीम
हेडर के आउटलेट पर क्तस्थत मुख्य स्टीम स्टॉप िाल्व तक की कु ल मािा होनी चावहए।
भाग-2
पूिषिती अध्यायो ंमें वनधाषररत मानक शतों से वभन्नता की अनुमत सीमा
590. मानक से वभन्नता ─ इन विवनयमो ों के पूियिती अध्यायो ोंमें दी गई मानक शतों से वभन्नताएों छोटे सौर
बॉयलरो ोंके वलए अनुमत होनी चावहए, जैसा विवनयम 591 से 594 में वदया गया है।
591. सामग्री – (1) छोटे सौर बॉयलरो ोंके वनमायण में प्रयुि सामग्री इन विवनयमो ोंमें वकए गए प्रािधानो ोंके
अनुरूप होनी चावहए।
(2) (क) बॉयलरो ों के वनमायण में प्रयुि प्लेटटस या तो आईएस: 2062 या उसके समतुल् या अध्याय -2 के
अनुसार होने चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 491
(ख) शेल और हेडटस के वलए प्लेट की मोटाई कम से कम 6 वममी होनी चावहए और ट्यूबो ों के वलए ट्यूब
शीट के रूप में हेडटस की मोटाई कम से कम 8 वममी होनी चावहए।
(3) ट्यूब और पाइप काबयन स्टील, अलॉय स्टील, स्टेनलेस स्टील या कॉपर के बने होने चावहए।
(4) िातािरण और सौर विवकरण के सीधे सोंपकय में आने िाले बॉयलर के वहस्सो ों के वलए 0.75 वममी के
करोशे़ न अलाउोंस का प्रािधान होना चावहए।
(5) बॉयलर के स्टेनलेस स्टील भागो ोंके वलए वकसी करोशे़ न अलाउोंस की आिश्यकता नही ोंहै।
(6) यवद लागू विवनयमो ों में उक्तिक्तखत अन्य सभी प्रमाणीकरण अपेिाओ ों का अनुपालन वकया जाता है, तो
वनमायता से भारतीय बॉयलर विवनयमो ों के प्रपिो ों सवहत सामवग्रयो ों को प्रमावणत करने की आिश्यकता नही ों
है।
592. वडजाइन, वनमाषण, कायष-कौशल और अवधकतम अनुमत कायषशील दाब की गणना करने की
विवध- (1) अन्यथा विवनवदयष्ट स न वकए जाने पर वनमायण कायय, इन विवनयमो ों के पूियिती अध्यायो ों के प्रासोंवगक
प्रािधानो ोंमें वदए गए प्रािधानो ोंके समान ही होने चावहए।
(2) फ्यूजन िेल्ड वकए हुए छोटे सौर बॉयलरो ों के मामले में, िेल्ड वकए गए ज्वाइोंटटस की रेवडयोग्राफी या
स्टरेस रवहत होना अवनिायय नही ोंहोना चावहए।
593. जांच और परीिण – (1) वनमायण के दौरान और वनमायण कायय पूरा होने के बाद, वनरीिण प्रावधकारी
द्वारा छोटे सौर बॉयलरो ोंका वनरीिण वकया जाना चावहए।
(2) छोटे सौर बॉयलरो ोंका वनरीिण कायय वनम्नवलक्तखत चरणो ोंमें वकया जाना चावहए, अथायतट:-
(i) सामग्री की पहचान और वनरीिण कायय करना।
(ii) हाइडरोवलक परीिण; प्रत्येक वनवमयत बॉयलर में पूणयतः या आोंवशक रूप से िेल्ड का कायय हुआ है,
हाइडरोवलक परीिण दाब, बॉयलर के वडजाइन दाब के दो गुना के बराबर होना चावहए।
594. प्रमाण-पत्र और वनमाषता की टैम्प – (1) प्रमाण-पि और वनमायता की स्टैम्प इन विवनयमो ोंके
अध्याय -1 के प्रािधानो ोंके अनुरूप होने चावहए।
(2) जहाों बॉयलर प्लेट के छोटे आकार के कारण उस पर सभी जानकारी स्पष्ट स रूप से अोंवकत नही ोंकी जा
सकती है, िहाों बॉयलर के साथ वदए गए वनमायता के प्रमाण पि में आिश्यक वििरण शावमल होगों े, लेवकन
ऐसे सभी मामलो ों में नाम, कायय सोंख्या और वनमायण का ि य बॉयलर पर अोंवकत या प्रदवशयत वकया जाना
चावहए।492 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
भाग-3
595. िाल्व, गेज, वफवटंग और फीड आपूवतष – (1) छोटे सौर बॉयलर में वनम्नवलक्तखत िस्तुएों लगी होनी
चावहए, अथायतट:–
(i) सफाई के वलए िाश प्लग;
(ii) जल स्तर को इोंवगत करने के वलए उपयुि प्रािधान;
(iii) एक िॉटर वफवडोंग िाला उपकरण;
(iv) फीड पाइप में एक चेक िाल्व और एक स्टॉप िाल्व लगा होना चावहए, वजसका आकार पाइप के
आकार से कम नही ोंहोना चावहए;
(v) बॉयलर के जल को वनकालने हेतु उपयुि प्रािधान;
(vi) कम से कम 100 वममी डायल आकार िाला एक भाप दबाि गेज; और
(vii) भाप के दबाि को कम करने के वलए एक सुरिा िाल्व।
(2) सुरिा िाल्वो ों को भारतीय बॉयलर विवनयम के तहत प्रमावणत वकया जाना चावहए और अन्य सभी
वफवटोंग्स को ऐसी वफवटोंग्स के विवनमायताओ ोंद्वारा प्रमावणत वकया जाए।
596. पंजीकरण, प्रचालन और रख-रखाि - (1) अवधवनयम की धारा 12 की उप-धारा (2) के तहत
आिेदन के साथ अपेवित शुल्क िह होनी चावहए, जैसा वक विवनयम 304 में वनधायररत है।
(2) प्रत्येक चार ि य के बाद प्रमाण-पि के निीनीकरण के वलए वनरीिण शुल्क विवनयम 305 में विवनवदयष्ट स
शुल्क के अनुसार होना चावहए।
(3) छोटे सौर बॉयलरो ोंके विवनमायण और परीिण का प्रमाण-पि प्रपि-XXII में जारी वकया जाना चावहए।
(4) इन बॉयलरो ों को चलाने िाले ऑपरेटर के पास मैवटरक या इसके समतुल् न्यूनतम शैिवणक योग्यता
होनी चावहए।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 493
प्रपि I (क):आर 01 वदनाोंक: xx.xx.2026
प्रपत्र - I
(भाग-क)
[विवनयम 4+
वनयाषत के वलए विदेशी कोड के वलए बनाए गए बॉयलर के संबंध में वनमाषण के दौरान वनरीिण
प्रावधकारी वनरीिण प्रमाण पत्र
हम यह प्रमावणत करते हैं वक ……………………… प्रकार के बॉयलर; लोंबाई ……………… व्यास
……………… बॉयलर का वडजाइन दबाि ……………… दुकान सोंख्या ……………… के तहत मेससय
……………………… द्वारा वनवमयत बॉयलर को हमारी देख रेख में वनवमयत वकया गया और वनमायण के विवभन्न
चरणो ों में हमारे पययिेिक द्वारा वनरीिण वकया गया था और पाया गया वक वडजाइन, वनमायण और कारीगरी
सोंतो जनक है और हर तरह से विवशष्ट सता कोड …………… अनुसार है। बॉयलर पर वनम्नानुसार मुहर
लगाई जाती है:
पूरा होने पर बॉयलर का ……………… के वलए सिम व्यक्ति की उपक्तस्थवत में _____ को परीिण
वकया गया और यह परीिण पर सोंतो जनक ढोंग से खरा उतरा। इस प्रमाणपि के साथ परीिण और
वनरीिण का वििरण वदया गया है।
हमने अपने आप को सोंतुष्ट स कर वलया है वक बॉयलर का वडजाइन, वनमायण और आयाम वनमायता आरेखण
सोंख्या ________________ में दशायया गया है और जो हमारे द्वारा हस्तािररत और अनुमोवदत है और
वनमायता के वनमायण के प्रमाण पि में दजय वििरण हमारे सिोत्तम ज्ञान और विर्श्ास के अनुसार सही हैं।
…………… कोड/विशे वििरण के तहत अपेवित, वनमायता प्रमाणपि, उनके द्वारा हस्तािररत और हमारे
द्वारा प्रवतहस्तािररत, सोंलग्न है।
वनरीिण प्रावधकारी का नाम और हस्तािर494 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि I (ख):आर01 वदनाोंक: xx.xx.2026
प्रपत्र - I
(भाग-ख)
[विवनयम 8(क) देखें]
शॉप असेम्बल्ड बॉयलरो ंके वलए वनरीिण प्रमाण पत्र
वनरीिण प्रावधकारी : ____________________ प्रमाणपि सोंख्या ____________
हम यह प्रमावणत करते हैं वक मैससय ________द्वारा ___________________ वनमायता हृमाोंक के
अोंतगयत वनवमयत ___बॉयलर का वनमायण हमारी देख रेख में वकया गया और बॉयलर अवधवनयम, 2025
के तहत बनाए गए विवनयमो ों के अनुसार सिम व्यक्ति द्वारा वनमायण के विवभन्न चरणो ों में वनमायण का
वनरीिण वकया गया और यह पाया गया वक बॉयलरो ोंका वडजाइन और वनमायण और कारीगरी सोंतो जनक
और मानक शतों के अनुसार थे।
नीचे वदए गए वििरण के अनुसार बॉयलर शैल प्लेट पर मुहर लगाई जाती है।
वनमायता का नाम : __________
वनमायता का नोंबर: ___________ वनमायण का ि य: ________
करने के वलए परीिण वकया : ___________ वकग्रा/सेमी² (जी) ___________ को
बॉयलर का वडजाइन दबाि : __________ वकग्रा/सेमी² (जी)
सिम व्यक्ति या वनरीिण प्रावधकारी की आवधकाररक मुहर
बॉयलर का वनमायण कायय पूणय होने पर ____के वदन______सिम व्यक्ति की उपक्तस्थवत में _________
वकग्रा./िगय सेमी(जी) के हाइडरावलक परीिण दबाि के अध्यधीन था और यह परीिण सोंतो जनक रूप से
सफल रहा।
सभी िेल्डेड सीमो ोंको जहाों कही ोंलागू हो, विनाशकारी और गैर-विनाशकारी जाोंच के अधीन परखा
गया और इन्हें सोंतो जनक पाया गया।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 495
हमने अपने आप को सोंतुष्ट स कर वलया है वक बॉयलर का वनमायण और आयाम हमारे द्वारा
हस्तािररत वनमायता आरेखण सोंख्या _____________ में दशाषया गया है और हमारे द्वारा प्रवत हस्तािररत
प्रपि-IV (भाग-क) में वनमायता के वनमायण के प्रमाण पि में दजय वििरण, हमारे सिोत्तम ज्ञान और विर्श्ास के
अनुसार सही हैं।
सिम व्यक्ति का नाम और हस्तािर वनरीिण प्रावधकारी का नाम और
हस्तािर
वतवथ और मुहर496 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि I(ग):आर01 वदनाोंक: xx.xx.2026
प्रपत्र -I
(भाग-ग)
[विवनयम 8(क) देखें]
साइट असेम्बल्ड बॉयलरो ंके वलए वनमाषता के काम का वनरीिण प्रमाण पत्र
वनरीिण प्रावधकारी : ____________________
प्रमाणपि सोंख्या ____________
हम यह प्रमावणत करते हैं वक मैससय ________द्वारा ___________________ वनमायता हृमाोंक के
अोंतगयत वनवमयत ___बॉयलर का वनमायण हमारी देख रेख में वकया गया और बॉयलर अवधवनयम, 2025
के तहत बनाए गए वनयमो ों के अनुसार सिम व्यक्ति द्वारा वनमायण के विवभन्न चरणो ों में वनमायण का
वनरीिण वकया गया और यह पाया गया वक बॉयलरो ोंका वडजाइन और वनमायण और कारीगरी सोंतो जनक
और मानक शतों के अनुसार थे।
जहाों कही ोंलागू हो, नीचे वदए गए वििरण के अनुसार बॉयलर घटको ोंपर मुहर लगाई जाती है।
घटक का नाम आरेखण सोंख्या मुहर लगाने का वििरण
वनमायता का नाम : __________ वनमायता का नोंबर: ___________ वनमायण का ि य: ________
करने के वलए परीिण वकया : ___________ वकग्रा/सेमी² (जी) ___________ को
बॉयलर का वडजाइन दबाि : __________ वकग्रा/सेमी² (जी)
सिम व्यक्ति या वनरीिण प्रावधकारी की आवधकाररक मुहर
बॉयलर के वनमायण में प्रयुि सामग्री के नमूने का परीिण सिम व्यक्ति की उपक्तस्थवत में वकया
गया और इसे वनयमो ोंका अनुपालन में पाया गया।
सभी िेल्डेड सीमो ोंको जहाों कही ोंलागू हो, विनाशकारी और गैर-विनाशकारी जाोंच के अधीन परखा
गया और इन्हें सोंतो जनक पाया गया।
हमने अपने आप को सोंतुष्ट स कर वलया है वक बॉयलर का वनमायण और आयाम हमारे द्वारा
हस्तािररत वनमायता आरेखण सोंख्या _____________ में दशाषया गया है और हमारे द्वारा प्रवतहस्तािररत
प्रपि- IV (भाग-क) में वनमायता के वनमायण के प्रमाण पि में दजय वििरण, हमारे सिोत्तम ज्ञान और विर्श्ास
के अनुसार सही हैं।
सिम व्यक्ति का नाम और हस्तािर वनरीिण प्रावधकारी का नाम और हस्तािर
वतवथ और मुहर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 497
प्रपत्र-I(घ)आर01 वदनांक: xx.xx.2026
प्रपत्र- I
(भाग-घ)
[विवनयम 8 (क) (i) (iv) देखें+
बॉयलर के वनमाषण के दौरान प्रावधकारी का वनरीिण प्रमाण पत्र वजसके वलए मानक शतों से
बदलाि की अनुमवत दी गई है
हम यह प्रमावणत करते हैं वक ……………………… प्रकार के बॉयलर; लोंबाई ……………… व्यास
……………… बॉयलर का वडजाइन दबाि ……………… दुकान सोंख्या ……………… के तहत मेससय
……………………… द्वारा वनवमयत बॉयलर को हमारी देख रेख में वनवमयत वकया गया और वनमायण के विवभन्न
चरणो ों में हमारे पययिेिक वनरीिण वकया गया था और यह वक वडजाइन, वनमायण और कारीगरी को
सोंतो जनक पाया गया और सामग्री वडजाइन के वलए भारतीय बॉयलर विवनयम, 2026 में वनधायररत मानक
शतों से वभन्नता के अनुसार थी और सामग्री वडजाइन तथा वनमायण विशे ताएाँ भारतीय बॉयलर अवधवनयम
2025 के अनुरूप वनरीिण प्रावधकारी बोडय द्वारा अनुमवत प्रदत्त है।
बॉयलर को एोंड प्लेट के सामने िाले वहस्से पर नीचे दशायये अनुसार हमारी स्टैम्प लगाई जाती है।
वनमायता का नाम_________ वनमायण का ि य __________ कायय सोंख्या ______का बॉयलर के _______ वडजाइन
दबाि पर परीिण वकया गया । सिम व्यक्ति या वनरीिण प्रावधकारी की आवधकाररक मुहर।
बॉयलर के पूरा होने पर इसके डरम और हैडर सिम व्यक्ति की उपक्तस्थवत में_____20 _______को
एक जल दबाि परीिण के _____ अधीन सोंतो जनक ढोंग से परीिण पर खरे उतरे।
*बॉयलर के वनमायण में प्रयुि सामग्री के नमूनो ों का सिम व्यक्ति की उपक्तस्थवत में परीिण वकया
गया और यह पाया गया वक िे आिश्यकताओ ों का अनुपालन करते हैं। सभी िेल्डेड सीमो ों का भौवतक
परीिण और रेवडयोग्रावफक परीिण, जहाों कही ोंलागू हो, वकया गया और सोंतो जनक पाया गया।
नोट : जहाों एक प्रवसद् वनमायता द्वारा प्रपि-IV (भाग-क) में प्रमाण पि प्रस्तुत करने का इच्छुक हो ओर
ऐसा कोई परीिण नही ोंवकया गया है िहााँ इस पैराग्राफ को काट दें।
* जो लागू न हो उसे काट दें।
हमने अपने आप को सोंतुष्ट स कर वलया है वक बॉयलर का वनमायण और आयाम हमारे द्वारा
हस्तािररत वनमायता आरेखण सोंख्या …………… में दशायये और हमारे द्वारा प्रवतहस्तािररत प्रपि-IV (भाग-
क) में वनमायता के वनमायण के प्रमाण पि में दजय वििरण हमारे सिोत्तम ज्ञान और विर्श्ास के अनुसार सही
हैं। बोडय या वनरीिण प्रावधकारी द्वारा अनुमत उि विवनयमो ोंमें वनधायररत मानक शतों से वभन्नता का वििरण
सोंलग्न है।
वनरीिण प्रावधकारी का नाम और हस्तािर
वदनाोंक …………… 20 का वदन ………498 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि I(ड़):आर01
वदनाोंक: xx.xx.2026
प्रपत्र I
(भाग-ङ)
[ विवनयम 8 (क) (v) देखें]
बॉयलर वनमाषण के पूरा होने के उपरान्त कायषथल पर प्रवतथावपत करने पर
वनरीिण प्रावधकरण वनरीिण प्रमाण पत्र
हम यह प्रमावणत करते हैं वक ............ प्रकार के बॉयलर बॉयलर का वडजाइन दबाि ...................
.....वकलोग्राम/ सेमी 2 (जी) ___ पर वनमायता सोंख्या ……………………………… के तहत
मेससय................................. द्वारा वनवमयत बॉयलर हमारी देखरेख में प्रवतस्थावपत वकया गया और प्रवतस्थापन
के विवभन्न चरणो ोंमें सिम व्यक्ति द्वारा इसका वनरीिण वकया गया और यह पाया गया वक प्रवतस्थापन और
कारीगरी सोंतो जनक था और यह भूवम बॉयलरो ों के वनमायण के वलए भारतीय बॉयलर अवधवनयम 2025 के
अोंतगयत मानक शतों के अनुसार था।
जहाों कही ोंभी लागू था सभी िेल्डेड सीमो ोंका पोस्ट िेल्ड हीट टरीटमेंट और गैर-विनाशकारी जाोंच के अधीन
परीिण वकया गया और इन्हें सोंतो जनक पाया गया।
प्रवतस्थापन के पूरा होने पर ______को सिम व्यक्ति की उपक्तस्थवत में बॉयलर का ...........................
वकग्रा / सेमी 2 (जी) के पानी के दबाि पर परीिण वकया गया और इसने परीिण को सोंतोसजनक रूप
से परीिण को सहन वकया।
हमने अपने आप को सोंतुष्ट स कर वलया है वक बॉयलर का प्रवतस्थापन वनमायता आरेखण सोंख्या
_______में दशायये गए अनुसार हमारे सिोत्तम ज्ञान और विर्श्ास के अनुसार सही है।
सिम व्यक्ति का नाम ि हस्तािर वनरीिण प्रावधकारी का नाम
और हस्तािर
वदनाोंक ……………………… 0 का वदन ………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 499
प्रपि II: आर01 वदनाोंक: xx.xx 2026
प्रपत्र संख्या II
[विवनयम 7(1)(ख)(iii) और 541 देखें]
योग्य बॉयलर िेल्डर के प्रमाणपत्र की संख्या:
भारतीय बॉयलर विवनयम, 2026
के तहत जारी
िेल्डर का नाम :
नवीनतमपासपोटटसाइज़
वपता का नाम : फोटो(हाडट/सॉफ्टकॉपी)
जन्म की तारीख : सक्षमव्यक्तिद्वारा
अक्तभप्रमाक्तणत
पहचान वच् :
िेल्डर के हस्तािर :
िेल्डर का पता :
(सोंगठन का पता)
रोजगार वििरण
से तक वनयोिा का नाम वजस काम पर लगे हैं
यह प्रमावणत वकया जाता है वक श्री./सुश्री __________________________ (िेल्डर का नाम)
पुि/पुिी श्री................. की उपक्तस्थवत में (सिम प्रावधकारी के प्रवतवनवध)_____________ द्वारा वनधायररत तरीके
से जाोंच और परीिण वकया गया है और उन्हें पृष् सोंख्या दो में वदए गए वििरण के अनुसार साउोंड िेल्ड
करने की िमता को सोंतो जनक ढोंग से सावबत करने के वलए माना जाता है और इस तरह के िेल्ड करने
के वलए अवधकृ त है। िह इन विवनयमो ोंके तहत िेक्तल्डोंग करने के वलए अवधकृ त है ।500 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रमाण पि की िैधता दी गई तारीख की समाक्तप्त या पुनिैधीकरण की समाक्तप्त की तारीख में से जो भी बाद
में हो, तक है।
यह __________ (तारीख) (सिम प्रावधकारी के कायायलय का नाम) की मुहर और
_________________________________के अवधकार के तहत प्रदान वकया गया।
तारीख मुहर ( सिम प्रावधकारी का नाम और हस्तािर )
योग्यता वििरण
वििरण अिलोकन
परीिण की वतवथ
परीिण का प्रकार और क्तस्थवत
सामग्री के प्रकार काबयन स्टील / वमश्र धातु स्टील / वनवकल और
वनवकल वमश्र;
सामग्री समूहन (एम और जीआर सोंख्या)
िेक्तल्डोंग की प्रवहृया
समथयन के साथ िेल्ड हााँ/नही
इलेररोड ग्रुवपोंग (U सोंख्या)/ वफलर िायर का
नाम/विशे वििरण
परीिण टुकड़े का एक्स-रे वकया गया हााँ/नही
िैधता की अिवध
से तक निीनीकरण का सिम प्रावधकारी
आधार हस्तािर और मुहर
(वनरोंतर जुड़ाि /
नए परीिणो ोंके
आधार पर)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 501502 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि III:आर00 वदनाोंक: xx.xx 2026
प्रपत्र - III
[विवनयम 7 (1 ) (ख)(V) देखें]
भारतीय बॉयलर विवनयम, 2026 के तहत बॉयलरो/ं बॉयलर घटको ंके वनमाषता के वलए
प्रश्नािली प्रपत्र
1. फमष का पंजीकृ त नाम और उसका थायी पता:
2. थापना िर्ष:
3. कारखाने का पता :
4. वजस िगीकरण के वलए आिेदन वकया गया-
(क) विशेर् िगष
(ख श्रेणी I
(ग) श्रेणी II
(घ) श्रेणी III
(ङ) श्रेणी IV
(च) घटक वनमाषता
नोट: 1. एक उच्च श्रेणी का बॉयलर वनमाषता वनम्न श्रेणी के बॉयलरो ं
के विवनमाषण के वलए पात्र होगा
2. एक बॉयलर विवनमाषता बॉयलर घटक विवनमाषता के रूप में बॉयलर घटको ं के विवनमाषण के
वलए भी पात्र होगा
2. वनमाषण के वलए उपलब्ध ढका हुआ िेत्र :
3. उपलब्ध वडजाइन सुविधाओ ंऔर उसके थान का वििरण:
4. कारखाने के भीतर उपलब्ध विवनमाषण सुविधाओ ंका वििरण:
5. कारखाने के भीतर उपलब्ध परीिण सुविधाओ ंका वििरण:
6. अनुसंधान एिं विकास सुविधाओ ंका वििरण, यवद कोई हो:
7. योग्य एनडीटी कावमषको ंकी संख्या:
8. योग्य िेल्डर की संख्या:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 503
9. तकनीकी जनशल्पि का वििरण:
10. आंतररक गुणित्ता वनयंत्रण प्रणाली का वििरण :
11.कोई अन्य प्रासंवगक जानकारी:
वदनांक ………………… फमष के अवधकृ त
हिािरकताष के मुहर के साथ हिािर
थान ………………..
नोट 1: एक वनमाषता के रूप में फमष की मान्यता तीन िर्ष की अिवध के वलए होगी , उसके बाद िे
उि अिवध की समाल्पप्त से कम से कम तीन महीने पहले अपनी मान्यता के निीनीकरण के वलए
आिेदन करेंगे
नोट 2: जहां भी आिश्यक हो, अवतररि पन्नो ंपर सूचना प्रिुत की जा सकती504 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि IV(क) :आर01
वदनाोंक: xx.xx.2026
प्रपत्र- IV
[विवनयम 8(ख) देखें ]
वनमाषण और परीिण के वनमाषता का प्रमाण पत्र
1. वििरण वनमायता का नाम और पता …………………………………………
……………………………………………… के वलए वनवमयत/ स्टॉक उद्देश्य
सम्पकय सूि ………………………………………………………………………
बॉयलर का प्रकार ……………………………………………… कु ल लोंबाई
सबसे बड़े बेल्ट् के अोंदर का व्यास …………………………………………………
बॉयलर का वडजाइन दबाि ………………………………………………………
वकग्रा/सेमी² (जी)
ररहीटर दबाि -----------------------------------------------------
वकग्रा/सेमी² (जी)
बॉयलर की वनमायता सोंख्या …………………………………………… ……
वनमायण का ि य …………………………………………… ……
कु ल ताप सतह ……………………………………………… िगय मीटर
िाष्पीकरण िमता ……………………………………………………… (सुरिा िाल्वो ोंकी राहत
िमता की गणना के वलए)
भाप का अोंवतम तापमान (वडजाइन) सुपरहीटर आउटलेट ……………°
ररहीटर आउटलेट …………… °
बॉयलर का सोंविप्त वििरण …………………………………………… ……
2. वनमाषता के कायषथल पुजे का नाम ………………………………………
पर वनवमषत पुजे
आरेखण सोंख्या……………………………………… ……
…………………………………………………………… द्वारा बनाया गया
पहचान वच् ………………………………………………………
………………………… (वनरीिण प्रावधकारी) द्वारा वनमायण के सभी चरणो ोंमें वनवमयत भागो ों
का वनरीिण वकया गया।
परीिण के बाद पुजे (पुजों) का …………… द्वारा हाइडरॉवलक रूप से परीिण और
वनरीिण वकया गया।
3. वनमाषता के कायषथल पुजे का नाम ……………………………………… ……
से बाहर वनवमषत पुजे
आरेखण सोंख्या…………………… ……
…………………………………………………………………… द्वारा बनाया गया
पहचान वच् ………………………………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 505
………………………… (वनरीिण प्रावधकारी) द्वारा वनमायण के सभी चरणो ोंमें वनवमयत पुजों
का वनरीिण वकया गया।
परीिण के बाद पुजे (पुजों) का …………… द्वारा हाइडरॉवलक रूप से परीिण और
वनरीिण वकया गया।
नोट : इसी प्रकार की जानकारी वनमायता के काययस्थल से बाहर वनवमयत प्रत्येक पुजे के वलए प्रस्तुत की जानी है।
4. वनमाषण
वनमायण भारतीय बॉयलर विवनयम के अध्याय 3/ 4 /10/12/14 /16/17 के अनुसार है ।
प्रत्येक बेल्ट् में शेल/डरम में लम्बित सीमो ोंकी सोंख्या …………………………………
फनेस में प्रत्येक ररोंग में लम्बित सीमो ोंकी सोंख्या ………………………………………
शेल/डरम में पररवधगत सीमो ोंकी सोंख्या ……………………………………
(अोंत सीम सवहत) ………………………………………………………… ……
फनेस में पररवधगत सीमो ोंकी सोंख्या…………………………………
वनमायण के दौरान िेल्डेड सीम में की गई मरम्मत, यवद कोई हो तो उसका वििरण ।
ऊष्मा उपचार का वििरण ……………………………………………………… ……
जहाों आिश्यक हो िहााँ, वनरीिण प्रावधकारी की सोंतुवष्ट स के वलए सभी िेल्डेड सीमो ों को रेवडयोग्रावफक जाोंच के
अधीन रखा
गया था।
नोट : जो लागू न हो उसे काट दें
5. डरम/शेल का वििरण
शेल प् लेट ट्यूब प्लेट वसर
)
िों ण
ी
ज ए ा ि ी ( .ी म
स ख्य र प से
ा सों क गय
म व्य ि
.सों .हृ
ा न ा क
स्तु ि
क त
व क े ाोंस ई ा ब लों
ी क ल
ो ह न मे
र
ा क आ
ट व स्टै
ो डर इ ा ह
त व प्र
ा ग्र क
व
में
ीममव
ईाटोम
में ीममव
ाज्यिव
ःन्तअ
में
. ीममव
ईाटोम
में ीममव
ाज्यिव
ःन्तअ
में
. ीममव
ईाटोम
*राकप्र
. ीममव
ाज्यिव
ीक
टप्ले
में
1 2 3 4 5 6 7 8 9 10 1 1 12 13
* दशायएों (1) फ्लैट (2) वडश (3) दीघयिृत्ताकार (4) अधयगोलाकार
6. हेडर और बॉक्स506 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वििरण आकार और मोटाई वममी . हैड या एोंड हाइडरोस्टेवटक
आकृवत में परीिण
आकार मोटाई वममी . में
वकग्रा
/ सेमी² (जी)
7. माउंवटंग
सोंख्या िस्तु का नाम सामग्री प्रकार सोंख्या आकार
1. मुख्य स्टॉप िाल्व
2. सहायक स्टॉप िाल्व
3. सुरिा िॉल्व (क)
(ख)
(ग)
4. ब्लो डाउन िाल्व
5. फ़ीड चेक िाल्व
8. सुरिा िाल्व और परीिण पररणामो ंका वििरण {(विवनयम 8 (घ) (vii) }
वनमायता …………………………………………………………………………………
िाल्वो ोंके पहचान वच् ………………………………………………………………… ……
वनमायता की सोंख्या …………………………………………………………………………………………………
प्रकार ……………………………………………………………………………………………………………
जीिन (एमएम) ………………………… आरेखण सोंख्या ………………………………………………………
िाल्व वििरण:
सामग्री ……………………………………………………………………………………………… ……
िाल्व सीट …………………………………………………………………………………………… ……
फ्लैट/बेिेल …………………………………………………………………………………………
सीवटोंग िाल्व का व्यास ………………………………………………………………………………
िाल्व बोडी:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 507
सामग्री ……………………………………………………………………………………………… ……
नैक की ओपवनोंग …………………………………………………………………………………………
आउटलेट की ओपवनोंग ………………………………………………………………… ……
क्तरोंगें :
सामग्री ……………………………………………………………………………………………………
वनमायण की प्रवहृया …………………………………………………………………………………
रासायवनक सोंरचना ……………………………………………………………………………… ……
आयाम:
कॉइल का बाहरी व्यास ………………………………………………………………………
तार का सेक्सन …………………………………………………………………………… ……
कॉइलो ोंकी सोंख्या ……………………………………………………………………………………… ……
कॉइलो ोंकी मुि लोंबाई ……………………………………………………………………………
परीिण पररणाम:
परीिण का स्थान ………………… तारीख ………………………………………………………………………
बोंद होने का दबाि ………………………………………………………………………
वटप्पवणयाों:
क्या िाल्व आिाज करता है? ………………………………………………………………………………
क्या िाल्व की सीट लीक होती है? ………………………………………………………………………………
ब्लो ऑफ दबाि ……………………………………………………………………………………………
िाल्व का प्रकार और परीिण के पररणामो ोंका सार …………………………………………………………
िाल्व का प्रकार …………………………………………………………………… ……
परीिण का स्थान ………………………………………………… तारीख ……………………………
परीिण के पररणामो ोंद्वारा क्तस्थर 'सी' ………………………………………………………………… ……
इक्तच्छत ब्लो ऑफ दबाि के वलए िाल्व की िमता ………………………………………
वनमायता के प्रवतवनवध के हस्तािर परीिण देखने िाला प्रावधकारी
9. प्रमावणत वकया जाता है वक यहाों दजय वकए गए वििरण सही हैं और धारा 2 से 8 तक के वहस्से, वजनके
नाम के सामने प्रविवष्ट सयाों की गई हैं, बॉयलर के वनमायण में उपयोग वकए गए हैं।
उपयोग वकए गए विवभन्न भागो ों के सामने वदखाए गए वििरण सोंबोंवधत वनमायताओ ों के सोंलग्न प्रमाण पि के
अनुसार हैं।
बॉयलर का वडजाइन ऐसा है जैसा वक आरेखण सोंख्या ……… में दशाषया गया है
बॉयलर का वडजाइन और वनमायण बॉयलर अवधवनयम, 2025 के तहत विवनयमो ों का अनुपालन में
…………… वकग्रा./ सेमी² (जी) के वडजाइन दबाि पर हमारे उपरोि कायों के वलए वकया गया और508 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
……… के वदन ______को …………… वकग्रा. / सेमी² (जी) पर पानी के परीिण पर हमारे वजम्मेदार
प्रवतवनवध की उपक्तस्थवत में वजसका हस्तािर यहाों सोंलग्न है सोंतो जनक ढोंग से खरा उतरा।
वनमायता का प्रवतवनवध वनमायता
(नाम, हस्तािर और मुहर) (नाम, हस्तािर और मुहर)
नाम, हस्तािर और मुहर नाम, हस्तािर और मुहर
सिम व्यक्ति वनरीिण
प्रावधकारी वदनाोंक …………… का वदन ………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 509
प्रपि IV (ख) : आर01 वदनाोंक: xx.xx2026
प्रपत्र- IV
(भाग-ख)
[विवनयम 10 देखें+
पाइपो ंके वलए विवनमाषण और परीिण का प्रमाण पत्र
प्रमाणपि सोंख्या ---------------
वदनाोंक: -------
पुजे का नाम और मािा ………………………………………………………………………………………………………
……………
आरेखण सोंख्या
………………………………………………………………………………………………………………………………
………………………
वनमायता का नाम और पता
………………………………………………………………………………………………………………… ……
ग्राहक का नाम और पता …
*अवधकतम वीकीकायय कायय दबाि ……………… वकग्रा/सेमी² (जी)
* वडजाइन तापमान …………… ० C
कच्चा माल
वनमायण की प्रवहृया………………………………………………………………………………………………………… ……
पूरी तरह से वकल्ड/ररम्ड ………………………………………………………………………………………………………
……
रासायवनक सोंरचना………………………………………
…………………………………………………………………………… …… .
ऊष्मा
सोंख्या………………………………………………………… ………………………………………………………………
……………
आकार …………………………………………………………………………………………………………………
……………………510 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
परीिण प्रमाणपि सोंख्या और तारीख
…………………………………………………………………………………………………………… ……
स्टील वनमायता का नाम ……………………………………………………………………………………………………………
…
वनरीिण प्रावधकारी का नाम
………………………………………………………………………………………………………………
पाइप
वनमायण की प्रवहृया…………………………………………………………………………………………………………
मुख्य आयाम
…………………………………………………………………………………………………………………………… ………
टोलरेय स………………………………………………………………………………………………………………………
…………
विवशष्ट सता ………………………………………………………………………………………………………………… … ……
पाइप या िेल्ड पर बेंड परीिण …
फ्लैट करने का परीिण
…………………………………………………………………………………………………………………… ……………
अन्य परीिण …………………………………………………………………………………………………………………
……………
तन्यता बल ……………………………………………………………………… …………………………………………………
………
रासायवनक सोंरचना…………………………………………………………
………………………………………………………………
उष्मा
उपचार……………………………………………………… …………………………………………………………………
……………
हाइडरोवलक परीिण ……………… वकग्रा/सेमी² ( जी)
वनरीिण प्रावधकारी/प्रवसद् पाइप वनमायता का पहचान वच् …………………………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 511
प्रमावणत वकया जाता है वक यहाों दजय वकए गए वििरण सही हैं। फै विके टेड पुजों का वििरण आरेखण
सोंख्या .................. में दशाषया गया है।
पाइपो ों का वडजाइन और वनमायण *अवधकतम वीकीकायय काययशील दबाि _____________ वकग्रा / सेमी ²
के (जी) और _______0C के तापमान पर भारतीय बॉयलर वनयमो ों का पालन करने के वलए वकया गया है
और ___________ 20 के वदन __________ को हमारे वजम्मेदार प्रवतवनवध की उपक्तस्थवत में, वजसका
हस्तािर यहाों सोंलग्न है ये पाइप _____ वकग्रा / सेमी ² (जी) के एक जल परीिण पर सोंतो जनक ढोंग से
भी खरे उतरे।
वनमायता का प्रवतवनवध वनमायता
(नाम और हस्तािर) (नाम और हस्तािर)
हमने खुद को सोंतुष्ट स कर वलया है वक ________ का वनमायण भारतीय बॉयलर विवनयम 2026
के अनुसार वकया गया है । तैयार पाइप से वलए गए नमूनो ोंपर वकए गए परीिण हमारे द्वारा देखे गए हैं और
यहाों दजय वकए गए वििरण सही हैं।
सिम व्यक्ति का नाम और हस्तािर वनरीिण प्रावधकारी / प्रवसद् पाइप वनमायता
नाम और हस्तािर
स्थान _______________
वदनाोंक ________________
नोट 1): यह प्रपि पाइप वनमायताओ ों और पाइवपोंग फै विके टर दोनो ों के उपयोग हेतु है। इस
प्रपि में ऐसे कॉलम या पैराग्राफ जो लागू हो,ों या जानकारी जो अन्य प्रमाणपिो ों से
प्राप्त और प्रस्तुत की जा सके उसे ही इस प्रपि में भरने या दजय करने
की आिश्यकता है।
नोट 2): अन्यि से प्राप्त स्टील पाइप के वनमायण के मामले में, "सामग्री" और "पाइप" के सोंबोंध
में वििरण पाइप के सोंबोंध में प्राप्त प्रमाणपिो ों के समान रूपो ों से वलया जाएगा और
उपयुि कॉलम या पैराग्राफ में नोट वकया जाएगा।
नोट 3): स्टॉक और वबहृी के उद्देश्य के वलए, पाोंच से अवधक पाइपो ों के वलए, एक प्रपि जारी
वकया जाएगा।
नोट-(4): जाने-माने पाइप वनमायताओ ों से वडवजटल रूप से हस्तािररत ऑनलाइन प्रपि भी
वीकीकार वकया जाएगा।
नोट-(5) : प्रवसद् पाइप वनमायताओ ों के वलए सिम व्यक्ति और वनरीिण प्रावधकारी के हस्तािर
की आिश्यकता नही ोंहै।
नोट -(6): * के िल पाइवपोंग फै विके टर के वलए लागू ।512 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
स्टील से बने पाइपो ों के मामले में, भारत या अन्य देशो ों में जाने-माने स्टील वनमायताओ ों द्वारा बनाए और
परीिण वकए गए, प्रपि V (भाग-क) में उनके द्वारा प्रमावणत 'सामग्री' के बारे में वििरण कच्चे माल के
उपयुि कॉलम या पैराग्राफ में नोट वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 513
प्रपि IV(ग) : आर01 वदनाोंक: xx.xx.2026
प्रपत्र IV
(भाग-ग)
[विवनयम 11 देखें+
ट्यूबो ंके वलए विवनमाषण और परीिण का प्रमाण पत्र
प्रमाणपिसोंख्या---------------
वदनाोंक: ---------
पुजे का नाम और मािा ………………………………………………………………………………………………………
……………
आरेखण सोंख्या………………………………………………………………
…………………………………………………………… ……………………………
वनमायता का नाम और पता
……………………………………………………………………………………………………………………… ……………
ग्राहक का नाम और पता ……
*अवधकतम वीकीकायय कायय दबाि …………… वकग्रा/सेमी² (जी)
* वडजाइन तापमान …………… °
कच्चा माल
वनमायण की प्रवहृया………………………………………………………………………………………………………………
पूरी तरह से वकल्ड/ररम्ड ………………………………………………………………………………………………………
रासायवनक सोंरचना…………………………
………………………………………………………………………………………… ……
ऊष्मा
सोंख्या……………………………………… …………………………………………………………………………………
……………
आकार …………………………………………………………………………………………………………………
……………………514 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
परीिण प्रमाणपि सोंख्या और तारीख
……………………………………………………………………………………………………………… …
स्टील वनमायता का नाम ……………………………………………………………………………………………………………
…
वनरीिण प्रावधकारी का नाम
………………………………………………………………………………………………………………
ट्यूब
वनमायण की प्रवहृया ………………………………………………………………………………………………… ……
मुख्य आयाम
…………………………………………………………………………………………………………………………… ……
टोलरेय स ………………………………………………………………………………………………………………………
…………
विवशष्ट सता …………………………………………………………………………………………………………………………
…………
तन्यता बल
……………………………………………………………………………………………………………………………… …
रासायवनक
सोंरचना…………………………………………………………………………………………………………………………
बााि प्रवतशत……………………………………………………………………………………………………………………
……
मोड़
परीिण…………………………………………………………………………… ……………………………………………
…………………
फ्लैट करने का परीिण
………………………………………………………………………………………………………………………………
……………
हृवशोंग परीिण ……………………………………………………………………………………………………… ……………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 515
फ्लेयर परीिण
……………………………………………………………………………………………………………………………
…………………
फ्लैंज परीिण …………………………………………………………………………………………………………………
…………
अन्य परीिण
उष्मा
उपचार………………………………………………………………………………………………………………………………
………
हाइडरोवलक परीिण ………………………… …… वकग्रा/सेमी² (जी)
वनरीिण प्रावधकारी/प्रवसद् ट्यूब वनमायता का पहचान वच् ……………………………………………………………
प्रमावणत वकया जाता है वक यहाों दजय वकए गए वििरण सही हैं। फै विके टेड पुजों का वििरण आरेखण
सोंख्या .................. में दशाषया गया है।
ट्यूब का वडजाइन और वनमायण *अवधकतम वीकीकायय काययशील दबाि _____________ वकग्रा /
सेमी ² के (जी) और _______0C के अवधकतम तापमान पर भारतीय बॉयलर वनयमो ों का पालन करने के
वलए वकया गया है और ___________ 20 के वदन ___________ को हमारे वजम्मेदार प्रवतवनवध की उपक्तस्थवत
में, वजसका हस्तािर यहाों सोंलग्न है ये ट्यूब _____ वकग्रा / सेमी ² (जी) के एक जल परीिण पर
सोंतो जनक ढोंग से खरे उतरे।
वनमायता का प्रवतवनवध वनमायता
(नाम और हस्तािर) (नाम और हस्तािर)
हमने खुद को सोंतुष्ट स कर वलया है वक ________ का वनमायण भारतीय बॉयलर विवनयम 2026
के अनुसार वकया गया है । तैयार ट्यूब से वलए गए नमूनो ोंपर वकए गए परीिण हमारे द्वारा देखे गए हैं और
यहाों दजय वकए गए वििरण सही हैं।
सिम व् यक्त् त का नाम और हस्तािर वनरीिण प्रावधकारी / प्रवसद् ट्यूब वनमायता
का नाम और हस्तािर
स्थान ________________
वदनाोंक ________________516 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
नोट (1): यह प्रपि ट्यूब वनमायताओ ों और ट्यूब फै विके टर दोनो ोंके उपयोग हेतु है। इस प्रपि
में के िल ऐसे कॉलम या पैराग्राफ जो लागू हो,ों या जानकारी जो अन्य प्रमाणपिो ों से प्राप्त और प्रस्तुत
की जा सके उसे ही इस प्रपि में भरने या दजय करने की आिश्यकता है।
नोट (2): अन्यि से प्राप्त स्टील पाइप से वनमायण के मामले में, "सामग्री" और "ट्यूब" के सोंबोंध
में वििरण ट्यूब के सोंबोंध में प्राप्त प्रमाणपिो ों के समान रूपो ों से वलया जाएगा और
उपयुि कॉलम या पैराग्राफ में नोट वकया जाएगा।
नोट (3): स्टॉक और वबहृी के उद्देश्य के वलए, दस से कम ट्यूबो ों के वलए, एक प्रपि जारी
वकया जाएगा।
नोट-(4): जाने-माने पाइप वनमायताओ ों से वडवजटल रूप से हस्तािररत ऑनलाइन प्रपि भी
वीकीकार वकया जाएगा।
नोट-(5) : प्रवसद् ट्यूब वनमायताओ ों के वलए सिम व्यक्ति और वनरीिण प्रावधकारी के हस्तािर
की आिश्यकता नही ोंहै।
नोट -(6): * के िल ट्यूब फै विके टर के वलए लागू ।
स्टील से बने ट्यूबो ों के मामले में, भारत या अन्य देशो ों में जाने-माने स्टील वनमायताओ ों द्वारा
वनवमयत और परीिण वकए गए 'सामग्री' के बारे में वििरण जैसा वक उनके द्वारा प्रपि V (भाग-
क) में प्रमावणत वकया गया है, इस प्रमाणपि में कच्चे माल के उपयुि कॉलम या पैराग्राफ में
नोट वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 517
प्रपि IV (घ):आर01 वदनाोंक: xx.xx.2026
प्रपत्र – IV
(भाग-घ)
[विवनयम 12 देखें+
बॉयलर की माउंवटंग और वफवटंग के विवनमाषण और परीिण का प्रमाण पत्र
प्रमाणपि सोंख्या ………… वदनाोंक: ……………………
पुजे का नाम …………………………………………………………………………………………………………………
……………………………
मािा …………………………………………………………………………………………… हृम सोंख्या …………………
…
आरेखण
सोंख्या………………………………………………………………………………………………………………………………
………………………
वनमायता का नाम और पता
………………………………………………………………………………………………………………… ………
ग्राहक का नाम और पता ……
अवधकतम वीकीकायय वहृयाशील दबाि ………………… वकग्रा / सेमी 2 (जी)
वडजाइन तापमान ... ............ .. वडग्री सेक्तियस
हाइडरोवलक परीिण दबाि ……………………………………………… …… वकग्रा/सेमी 2 (जी)
मुख्य आयाम……………………………………………………………………… ………………………………………
विवशष्ट सता……………………………………………………………………………… ………………………………………
............
वनरीिण प्रावधकारी के पहचान वच्
……………………………………………………………………………………………
रासायवनक सोंरचना………………………………………………………… ……………
...................................................518 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
भौवतक परीिण के पररणाम …………………………………………………………………
………………………………………
(i) तन्यता शक्ति ……………………………………………………………… ...
...................................
(ii) अनुप्रस्थ मोड़ परीिण ……………………………………………………………
(iii) बााि ……………………………………………………………………………… ……………………………
अन्य परीिण ………………………………………
कच्चा माल
वनमायण की प्रवहृया………………………………………………
पूरी तरह से वकल्ड/ररम्ड ………………………………………………………………………………………………………
विवशष्ट सता …………………………………… ……
ऊष्मा
सोंख्या……………………………………… …………………………………………………………………………………
……………
आकार …………………………………………………………………………………………………………………
परीिण प्रमाणपि सोंख्या और तारीख ………………………………………
वनमायता का नाम………………………………………………
वनरीिण प्रावधकारी का नाम……………………………………………
प्रमावणत वकया जाता है वक हमारे द्वारा यहाों दजय वकया गया वििरण सही है।
___________ को भारतीय बॉयलर विवनयम 2026 के अनुपालन के वलए _____वकग्रा/सेमी 2 (जी)
के अवधकतम वीकीकायय कामकाजी दबाि के वलए वडजाइन और वनवमयत वकया गया है।
और हमारे वजम्मेदार प्रवतवनवध वजसका हस्तािर यहाों सोंलग्न है की उपक्तस्थवत में __________ 20 के
वदन ________________ को ______ वडग्री सेक्तियस के अवधकतम तापमान और ____________ वकग्रा /
सेमी 2 (जी) के दबाि पर पानी या वमट्टी का तेल या वकसी अन्य उपयुि तरल का पर उपयोग कर एक
हाइडरोवलक परीिण पर खरे उतरे:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 519
वनमायता प्रवतवनवध वनमायता
(नाम और हस्तािर) (नाम और हस्तािर)
हमने खुद को सोंतुष्ट स कर वलया है और _________ का वनमायण और परीिण भारतीय बॉयलर
विवनयम, 2026 की आिश्यकताओ ों के अनुसार वकया गया है । हम आगे प्रमावणत करते हैं वक यहाों दजय
वकए गए वििरण सही हैं।
नाम और हस्तािर नाम और हस्तािर
सिम व्यक्ति वनरीिण प्रावधकारी
वजसने परीिण देखा
स्थान _______________
वदनाोंक ________________
नोट: (1) कें द्रीय बॉयलसय बोडय द्वारा मान्यता प्राप्त प्रवसद् फाउोंडरी या फोजय द्वारा बनाए और परीिण
वकए गए िाल्व चेस्ट के मामले में, जैसा वक विवनयम 17 से 21 में वनधायररत वकया गया है, उनके
द्वारा प्रमावणत सामग्री के बारे में वििरण, प्रपि-IV (भाग-छ) / प्रपि-IV (भाग-ज) में और प्रपि-V
(भाग-क), प्रमाण पि में उपयुि कॉलम या पैराग्राफ में नोट वकया जाएगा और प्रवसद् फाउोंडरी या
फोजय से प्रमाण पि प्रस्तुत वकए जाने के मामले में, इस तरह के प्रमाण पि को वनरीिण प्रावधकारी
से प्रमाण पि के बदले में वीकीकार वकया जा सकता है, यह प्रपि में वनवदयष्ट स सामग्री के परीिण से
सोंबोंवधत है।
(2) सुरिा िाल्वो ों के मामले में, प्रपि-IV (भाग-क) के मद सोंख्या 8 में अपेवित वििरण और
परीिण के पररणाम भी वनमायता और वनरीिण प्रावधकारी द्वारा विवधित हस्तािररत प्रस्तुत वकए
जाने चावहए।
(3) स्टॉक और वबहृी के उद्देश्य के वलए, पचास से अवधक माउोंवटोंग और वफवटोंग के वलए एक प्रपि
जारी वकया जाएगा।520 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि-IV (भाग-ड़): आर01 वदनाोंक: xx.xx.2026
प्रपत्र-IV
(भाग-ड)
[विवनयम 13 और 50 से 57 देखें]
वनमाषण का प्रमाण पत्र और काल्पटंग का परीिण
प्रमाणपि सोंख्या और तारीख
ऊष्मा सोंख्या * और डालने की तारीख
वनमायता का नाम और पता ……
ग्राहक का नाम और पता …………………………………………………
आरेखण सोंख्या …………………………………………………………………………… ……
वििरण और मािा _________________________________________________
हृम सोंख्या ___________________
फाउोंडरी पहचान__________________________
रासायवनक सोंरचना
उष्मा उपचार
भौवतक परीिण के पररणाम।
(i) तन्यता शक्ति
(ii) अनुप्रस्थ मोड़ परीिण
(iii) बााि
(iv) अन्य परीिण
प्रमावणत वकया जाता है वक हमारे द्वारा यहाों दजय वकया गया वििरण सही है। यह भारतीय बॉयलर
विवनयम, 2026 की आिश्यकताओ ोंको पूरा करता है ।
वनमायता का प्रवतवनवध वनमायता
(नाम और हस्तािर) (नाम और हस्तािर)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 521
सिम व्यक्ति वनरीिण प्रावधकारी / प्रवसद् फाउोंडरी
का नाम और हस्तािर का नाम और हस्तािर
* इनिेस्टमेंट काक्तस्टोंग को छोड़कर 100 वममी से अवधक आकार की काक्तस्टोंग के वलए ऊष्मा सोंख्या,
कास्ट के अनुरूप चावहए ।
नोट: काक्तस्टोंग, कास्ट के तरह रफ-मशीन या फ़ाइनल मशीन हो सकती है।522 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि-IV (च) आर01 वदनाोंक: xx.xx.2026
प्रपत्र-IV
(भाग-च)
[ विवनयम 14 और 58 से 62 देखें ]
फोवजिंग के वनमाषण और परीिण का प्रमाण पत्र
प्रमाणपि सोंख्या और तारीख
ऊष्मा सोंख्या
कच्चे माल का वििरण
वनमायता का नाम और पता ……
ग्राहक का नाम और पता …………………………………………………
आरेखण सोंख्या …………………………………………………………………………… ……
वििरण और मािा______________________
फोजय शॉप की पहचान__________________________________
रासायवनक सोंरचना
उष्मा उपचार
भौवतक परीिण के पररणाम।
(i) तन्यता बल
(ii) अनुप्रस्थ मोड़ परीिण
(iii) बााि
(iv) अन्य परीिण
प्रमावणत वकया जाता है वक हमारे द्वारा यहाों दजय वकया गया वििरण सही है। यह भारतीय बॉयलर
विवनयम, 2026 की आिश्यकताओ ों को पूरा करता है ।
वनमायता का प्रवतवनवध वनमायता
(नाम और हस्तािर) (नाम और हस्तािर)
सिम व्यक्ति वनरीिण प्रावधकारी / प्रवसद् फोजय
नाम और हस्तािर नाम और हस्तािर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 523
प्रपि-IV (छ) आर01 वदनाोंक: xx.xx.2026
प्रपत्र-IV
(भाग-छ)
[ विवनयम 15 देखें ]
विवनमाषणष और (हैडसष, वडसुपरहीटसष,/अटेम्परेटर, ब्लोडाउन टैंक, फीडिॉटर टैंक, ऐक्युमूलेटर,
वडअरेटर) के वलए परीिण प्रमाणपत्र
प्रमाणपि सोंख्या : ……………………………………………… वदनाोंक:
……………………………………
पुजे का नाम : …………………………………………………
वनमायता का नाम और : ………………………………………..
पता
ग्राहक का नाम और : …………………………………………………
पता
आरेखण सोंख्या। : ………………………………………
अवधकतम :
वीकीकायय
कामकाजी
दबाि (वकलो /
सेमी² (जी) )
वडजाइन
विवनमायण की प्रवहृया,
कच्चे माल के परीिण प्रमाण तापमान उष्मा :
सामग्री की क्तस्थवत,
पि के बदले में सोंलग्न कच्चे उपचार
रासायवनक सोंरचना,
माल के परीिण प्रमाण पि :
तन्यता शक्ति, या प्रपि V (भाग-ख) देखें
हाइडरोवलक :
टोलरेय स, परीिण दबाि
बेंड परीिण, फ़्लैटवनोंग गैर विनाशकारी :
परीिण आवद। परीिण
वनरीिण प्रावधकारी पहचान वच्:
मद सामग्री का
पुजे का नाम मात्रा मेल् ट संख्या
संख्या आकार
01 पाइप
02 एोंड किर
03 स्टब्स524 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
04 खण्ड पाइप
05
06
प्रमावणत वकया जाता है वक यहाों दजय वकए गए वििरण सही हैं।
पुजों का वनमायण अवधकतम वीकीकायय काययशील दबाि _____________ वकग्रा / सेमी ² के (जी) और
_______0C के तापमान पर भारतीय बॉयलर अवधवनयम 2026 का पालन करने के वलए वकया गया है और
___________ के वदन ___________ को हमारे वजम्मेदार प्रवतवनवध की उपक्तस्थवत में, वजसका हस्तािर यहाों
सोंलग्न है ये ट्यूब ____ वकग्रा / सेमी ² (जी) के एक जल परीिण पर सोंतो जनक ढोंग से की खरे उतरे।
वनमायता के प्रवतवनवध के हस्तािर और मुहर वनमायता के हस्तािर और मुहर
अोंवतम वनरीिण वतवथ: ………………………………………
हमने खुद को सोंतुष्ट स कर वलया है वक ……………………… का वनमायण भारतीय बॉयलर
विवनयम, 2026 के अनुसार वकया गया है । जहाों कही ोंभी लागू हैं िे वकए गए परीिण हमारे द्वारा देखे गए
हैं, और यहाों दजय वकए गए वििरण सही हैं।
सिम व्यक्ति का नाम और हस्तािर वनरीिण प्रावधकारी का नाम और
हस्तािर
स्थान :…………………………… ……
वदनाोंक:…………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 525
प्रपि-IV (ज)):आर01 वदनाोंक: xx.xx.2026
प्रपि-IV
(भाग-ज)
[विवनयम 16 देखें ]
वडश एंड/एंड किसष के वलए विवनमाषण और परीिण प्रमाण पत्र
परीिण प्रमाणपि सोंख्या : ……………………………………………… वदनाोंक:
…………………………
पुजे का नाम :
वनमायता का नाम और पता :
ग्राहक का नाम और पता :
आरेखण सोंख्या। : अवधकतम वीकीकायय :
काययशील
दबाि (वकग्रा./सेमी² (जी) )
वडजाइन तापमान (ºC) :
विवनमायण की प्रवहृया,
कच्चे माल के उष्मा उपचार :
सामग्री की क्तस्थवत,
परीिण प्रमाण पि
हाइडरोवलक परीिण दबाि :
रासायवनक सोंरचना,
के बदले में सोंलग्न
तन्यता शक्ति, : कच्चे माल के गैर विनाशकारी परीिण :
परीिण प्रमाण पि
टोलरेय स,
या प्रपि IV-A देखें
बेंड परीिण, फ़्लैटवनोंग
परीिण आवद।
वनरीिण प्रावधकारी पहचान वच्:
सामग्री का मात्रा परीिण
मेल्ट संख्या
मद आकार प्रमाणपत्र
पुजे का नाम नमूना / प्लेट
संख्या संख्या और
संख्या
तारीख
01 प्लेट / फोवजिंग526 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रमावणत वकया जाता है वक यहाों दजय वकए गए वििरण सही हैं।
वनमायता के प्रवतवनवध के हस्तािर और मुहर वनमायता के हस्तािर और मुहर
अोंवतम वनरीिण वतवथ:
हमने खुद को सोंतुष्ट स कर वलया है वक _________ का वनमायण भारतीय बॉयलर विवनयम, 2026 के अनुसार
वकया गया है । आयोवजत परीिण हमारे द्वारा देखा गया है और यहाों दजय वकए गए वििरण सही
हैं।
सिम व्यक्ति का नाम और हस्तािर वनरीिण प्रावधकारी का नाम और हस्तािर
स्थान :……………………………
वदनाोंक:………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 527
प्रपि V (क):आर01 वदनाोंक: xx.xx.2026
प्रपत्र V
(भाग- क)
[विवनयम 8 (घ) ]
टील वनमाषता का विवनमाषण प्रमाणपत्र और परीिण के पररणाम
हम यह प्रमावणत करते हैं वक नीचे िवणयत सामग्री मेससय ………………… द्वारा _______ विवनदेशो ोंके
अनुसार --------- प्रवहृया द्वारा बनाई गई है, ………………… और ………………… द्वारा रोल की गई है और
हमारे परीिण हाउस मैनेजर या उसके प्रवतवनवध की उपक्तस्थवत में वनधायररत परीिणो ों और टोलरेय स के
अनुसार उसका सोंतो जनक ढोंग से परीिण वकया गया है।
प्लेट और बार के वलए, भौवतक गुणो ों का उिेख करना आिश्यक है, जबवक वसक्तियाों, वबलेट,
ब्लूम, लैब और कॉनकास्ट बार वजन्हें और सोंसावधत वकया जाना है, उनके भौवतक गुणो ों का स्टील वनमायता
द्वारा उिेख करने की आिश्यकता नही ोंहै।
परीिण के पररणाम
आकार
ा
त
ा ख्य म ा ख्य न्य त2 ी म त श त
ा ख्य सों ा ष्म ऊ सों र औ ड ाोंि ा न ा क द ा त्प उ सों ी क ोंो ड़ क टु ा क क त ने ट टू म व / ा ग्र क व ल ब व प्र ा क ा त न्य त ण ि ी र प ड बैं ााँय ण व प्प ट
व
)रटीम(
ईाबलों
)रटीम(
ईाड़ौच
ईाटोम
ाय साव्य )ीममव(
रासायवनक विश्ले ण
…………………………………………………………………………………………………………………
अन्य परीिण ……………………………………………………………………………………
………………………………………
वनमायता का प्रवतवनवध वनमायता
(नाम और हस्तािर) (नाम और हस्तािर)528 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
हमने खुद को सोंतुष्ट स कर वलया है वक ________ ने भारतीय बॉयलर विवनयम, 2026 के अनुसार
उत्पादो ों का वनमायण वकया गया है । तैयार उत्पादो ों से वलए गए नमूनो ों पर वकए गए परीिण हमारे द्वारा देखे
गए हैं और यहाों दजय वकए गए वििरण सही हैं।
सिम अवधकारी के वनरीिण प्रावधकारी/प्रवसद् स्टील वनमायता के
नाम और हस्तािर नाम और हस्तािर
स्थान _______________
वदनाोंक ________________[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 529
प्रपि V (ख): आर01 वदनाोंक: xx.xx.2026
प्रपत्र – V
(भाग- ख)
[विवनयम 8 (घ) देखें ]
मूल परीिण प्रमाणपत्रो ंके थान पर विवनमाषण प्रमाण पत्र और परीिण के पररणाम
यह प्रमावणत वकया जाता है वक वनमायता सोंख्या ……… आरेखण सोंख्या :…………………के अनुसार
मूल परीिण प्रमाणपि में बॉयलर या उसके घटको ोंके विवनमायण में प्रयुि सामग्री के सोंबोंध में वनम्नवलक्तखत
जानकारी होती है:-
बॉयलर घटक मािा आकार कास्ट/हीट नों. स्टील बनाने विशे वििरण
प्लेट नों. की प्रवहृया
1 2 3 4 5 6
स्टील वनमायता/पुजाय वनमायता का उष्मा उपचार
नाम
प्रमाणपि सोंख्या और तारीख
7 8 9
% रासायवनक विश्ले ण यील् ड शक्ति यूटीएस तन्यता % गेज मोड़ वनरीिण
CMnPSSi* अन्य वमश्र धातु तत्व (वकलो/वममी 2 ) (वकलो/वममी 2 ) लोंबाई परीिण प्रावधकारी
का नाम
10 1 1 12 13 14 15
*(काबयन, मैंगनीज, फास्फोरस, सल्फर, वसवलकॉन)530 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रमावणत वकया जाता है वक हमारे द्वारा यहाों दजय वकया गया वििरण सही है। यह भारतीय बॉयलर
विवनयम, 2026 की आिश्यकताओ ोंको पूरा करता है ।
वनमायता का प्रवतवनवध वनमायता
(नाम और हस्तािर) (नाम और हस्तािर)
सिम व्यक्ति वनरीिण प्रावधकारी
का नाम और हस्तािर का नाम और हस्तािर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 531
प्रपि VI (क) :आर01 वदनाोंक: xx.xx.2026
प्रपत्र - VI
(भाग-क)
[विवनयम 17 (2) देखें+
कें द्रीय बॉयलर बोडष से "वनरीिण प्रावधकारी" बनने के वलए मान्यता की मांग करने िाली
फमों/कं पवनयो ंद्वारा उत्तर वदये जाने िाली प्रश्नािली
1. कों पनी/फमय का पोंजीकृ त नाम और पता:
2. पिाचार का पता:
3. िह ि य वजसमें कों पनी/फमय की स्थापना की गई थी।
4. वनरीिण प्रावधकारी के रूप में प्रस्तावित देश/प्रचालन िेि:
5. क्या कों पनी/फमय प्रचालन के प्रस्तावित देशो ोंमें पोंजीकृ त है?
यवद हाों, तो कृ पया उसका वििरण दें।
6. क्या आपकी कोई शाखा या सहयोगी कायायलय है?
यवद हाों, तो कृ पया उनके नाम और पते दें।
7. क्या कों पनी/फमय भारतीय या अोंतरायष्ट सरीय कोड और मानको ों के तहत एक वनरीिण प्रावधकारी के
रूप में कायय कर रही है?
यवद हाों, तो उसका वििरण।
8. भारतीय बॉयलर विवनयम, 2026 के तहत वनरीिण प्रावधकारी के रूप में मान्यता के निीनीकरण
के मामले में , क्या आपने वपछले पाोंच ि ों के दौरान वनरीिण वकया है?
यवद हाों, तो उसका वििरण।
9. क्या कों पनी/फमय भारतीय या अोंतरायष्ट सरीय सोंवहताओ ों और मानको ों के तहत वनरीिण, प्रमाणन और
सोंबोंवधत गवतविवधयो ोंके अलािा वकसी अन्य िावणक्तज्यक गवतविवध में शावमल है?
यवद हाों, तो उसका वििरण।
10. कृ पया उन बॉयलरो ोंके वडजाइन दबाि के प्रकार, आकार और श्रेणी का उिेख करें वजनका
आपने वनरीिण प्रावधकारी के रूप में वनमायण के दौरान अब तक वनरीिण वकया है, साथ ही आपके
द्वारा प्रदान की जाने िाली सेिा की श्रेवणयो ोंका भी उिेख करें, अथायतट: -
(क) कृ पया वनमायण के विवभन्न चरणो ोंके नाम बताएों वजन पर वनरीिण वकए जाते हैं।
(ख) बॉयलर के वनमायण के बाद के िल हाइडरोवलक परीिण।532 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
11. आपके यहाों वकतने वनरीिक/सिम व्यक्ति वनयुि हैं? कृ पया उन व्यक्तियो ों द्वारा प्राप्त योग्यताओ ों का
वििरण दें।
12. क्या आपके पास बॉयलरो ों के वनमायण के सोंबोंध में सभी आिश्यक विनाशकारी और गैर-
विनाशकारी परीिण करने के वलए वीकयों की कोई परीिण प्रयोगशाला है?
यवद हाों, तो उसका वििरण।
13. क्या आपके पास इन-हाउस वडजाइन और आरेखण वनरीिण कायायलय है?
यवद हाों, तो उसका वििरण।
14. क्या आपके पास भारतीय बॉयलर विवनयम, 2026 के अनुसार वनरीिण आिश्यकताओ ों को पूरा
करने के वलए स्थावपत और अनुरवित कोई दस्तािेज गुणित्ता काययहृम है ?
यवद हाों, तो उसका वििरण दें ।
15. क्या आपके पास वनरीिण और प्रमाणन कायय के वलए सोंगठन में काययरत सभी वनरीिको/ों सिम
व्यक्तियो ोंकी पाठ्यचयाय है?
16. क्या आप वनरीिको/ों सिम व्यक्तियो ोंके वलए प्रवशिण काययहृम चला रहे हैं?
यवद हाों, तो उसका वििरण।
17. क्या आप भारतीय बॉयलर विवनयम, 2026 के अनुरूप बॉयलरो,ों एकोनोमाइजर और उनके
सहायक उपकरणो ोंके वनरीिण का कायय करने के वलए तैयार हैं ?
18. क्या आप, आपके द्वारा जारी प्रमाणपि की पूरी वजम्मेदारी वीकीकार करने के वलए तैयार हैं?
19. क्या वनरीिण प्रावधकारी के रूप में मान्यता के आपके अनुरोध को वकसी प्रावधकारी द्वारा
अवीकीकार वकया गया है? यवद हाों, तो जानकारी दें।
20. क्या आप भारतीय बॉयलर विवनयमो ों के प्रारूपो ों में वनरीिण वकए गए उत्पादो ों के वलए प्रमाणपि
जारी करने के वलए तैयार हैं?
21. क्या आप जानते हैं वक मान्यता के िल पाोंच ि य की अिवध के वलए है, जो हर पाोंच ि य के बाद नए
वसरे से मूल्ाोंकन पर निीकरणीय है?
नाम , हस्तािर और मुहर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 533
प्रपि VI (ख) : आर01 वदनाोंक: xx.xx 2026
प्रपत्र -VI
(भाग-ख)
[विवनयम 17(2) देखें+
"सिम प्रावधकारी" के रूप में मान्यता प्रदान वकए जाने िाली फमष/कं पनी की योग्यता के बारे में
जानकारी प्राप्त करने के वलए प्रश्नािली
1. कों पनी/फमय का पोंजीकृ त नाम और पता।
2. पिाचार का पता।
3. ि य वजसमें कों पनी/फमय की स्थापना की गई थी।
4. शाखा या सहयोगी कायायलय का पता, यवद कोई हो।
5. कों पनी/फमय का प्रमुख कायय।
6. क्या कों पनी/फमय के पास िेल्डरो ों के वलए कोई प्रवशिण अनुभाग है? यवद हाों, तो योजना का वििरण
बताया जाए।
7. क्या कों पनी/फमय वनयवमत रूप से अपने िेल्डरो ोंद्वारा वकए गए िेल्ड का परीिण करती है? यवद हाों,
तो अनुसरण वकए गए कोड और वकए गए परीिणो ोंका वििरण कृ पया बताया जाए।
8. परीिण आयोवजत करने के वलए सोंगठन द्वारा कौन सी सुविधाएों प्रदान की जा सकती हैं या प्राप्त की जा
सकती हैं?
9. क्या कों पनी/फमय अन्य सोंगठन द्वारा वनयोवजत िेल्डरो ोंका परीिण करने के वलए तैयार है?
10. भारतीय बॉयलर विवनयम, 2026 के तहत सिम प्रावधकारी के रूप में मान्यता के निीनीकरण के
मामले में , क्या आपने वपछले पाोंच ि ों के दौरान िेल्डर का वनरीिण और प्रमाणीकरण वकया है?
यवद हाों, तो उसका वििरण।
11. क्या कों पनी/फमय भारतीय बॉयलर विवनयम, 2026 की आिश्यकताओ ों के अनुसार परीिण करने के
वलए तैयार है ?
12. प्रमाणपि जारी करने के वलए एक परीिण आयोवजत करने के वलए कों पनी/फमय एक उम्मीदिार से
वकतना शुल्क लेगी। वनम्नवलक्तखत शी ों के तहत अनुमान वदए जा सकते हैं:
(क) परीिण टुकड़े, इलेररोड और/या वफलर रॉडटस की आपूवतय के वलए:
(ख) िेक्तल्डोंग मशीन के उपयोग के वलए:
(ग) मशीवनोंग के वलए परीिण के टुकड़े और नमूना तैयार करना:
(घ) याोंविक परीिण करने के वलए (नमूना तैयार करने सवहत):
(इ) गैर-विनाशकारी परीिण के वलए:
13. क्या कों पनी/फमय भारतीय बॉयलर विवनयम, 2026 की आिश्यकताओ ों के अनुसार िेल्डरो ों की
जाोंच करने और उन्हें प्रमाणपि जारी करने के वलए तैयार है ?
14. क्या कों पनी/फमय इसके द्वारा जारी प्रमाणपिो ोंकी पूरी वजम्मेदारी लेने के वलए तैयार है।534 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
15. क्या आप जानते हैं वक मान्यता के िल पाोंच ि य की अिवध के वलए है जो हर पाोंच ि य के बाद नए
वसरे से मूल्ाोंकन पर निीकरणीय है?
नाम , हस्तािर और मुहर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 535
प्रपि VI(ग): आर01 वदनाोंक: xx.xx 2026
प्रपत्र - VI
(भाग-ग)
[विवनयम 17 (2) देखें+
कें द्रीय बॉयलर बोडष से "मान्यता प्राप्त प्रवस् टील वनमाषताओ"ं के रूप में अवधसूवचत वकए जाने
की मांग करने िाले टील वनमाषताओ ंद्वारा उत्तर वदये जाने के वलए प्रश्नािली
1. फमय/कों पनी का पोंजीकृ त नाम और पता:
2. कारखाने का पता:
3. वजस ि य कारखाना स्थावपत वकया गया था:
4. स्टील के उत्पादन की िमता:
5. स्टील के वनमायण की प्रवहृया:
6. स्टील उत्पादो ोंकी विविधता:
7. प्रत्येक वकस्भ में उत्पावदत स्टील की रेंज:
8. विवभन्न राष्ट सरीय और अोंतरायष्ट सरीय मानक वजनके वलए स्टील उत्पादो ोंका वनमायण वकया जाता है:
9. कारखानो ोंके भीतर उपलब्ध परीिण सुविधाएों:
10. वकए गए परीिणो ोंके प्रकार:
11. यवद हाों, तो वकसके द्वारा आयोवजत वकया गया:
12. क्या फमय/कों पनी द्वारा वकए गए परीिण देश के अन्य सोंगठनो ों को वीकीकायय हैं? यवद हाों, तो
वकसके द्वारा?
13. क्या फमय / कों पनी भारतीय बॉयलर विवनयम, 2026 के अनुसार परीिण करने के वलए तैयार
है ?
14. क्या फमय/कों पनी को वकसी अन्य देश में "प्रवसद् स्टील वनमायता" के रूप में मान्यता प्राप्त है?
15. क्या फमय/कों पनी के पास वकसी मान्यता प्राप्त वनरीिण प्रावधकारी के वनरीिण के तहत
भारतीय बॉयलर विवनयमो ों के प्रािधान के अनुसार स्टील का उत्पादन करने का न्यूनतम दो
ि य का अनुभि है।
यवद हाों, तो उसका वििरण।
16. क्या फमय/कों पनी भारतीय बॉयलर विवनयम, 2026 के प्रािधान के तहत प्रमाण पि प्रस्तुत
करने के वलए तैयार है ।
17. मान्यता के निीनीकरण के मामले में, क्या आपने वपछले पाोंच ि ों के दौरान भारतीय
बॉयलर विवनयमो ों के तहत "जाने-माने स्टील वनमायता" के रूप में स्टील का वनमायण और
आपूवतय की थी ?
यवद हाों, तो उसका वििरण।536 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
18. क्या फमय/कों पनी स्टील का वनमायण अयस्क से ही करती है या के िल अयस्क और स्क्रै प या
स्क्रै प से:
19. क्या फमय बोडय द्वारा वनयुि तीन सदस्ो ों िाली टीम को अपनी वनमायण प्रवहृया और इन-
हाउस परीिण सुविधाओ ों को वदखाने के वलए सहमत है।
20. क्या आप जानते हैं वक मान्यता के िल पाोंच ि य की अिवध के वलए है जो हर पाोंच ि य के
बाद नए वसरे से मूल्ाोंकन पर निीकरणीय है?
नाम , हस्तािर और मुहर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 537
प्रपि VI(घ): आर01 वदनाोंक: xx.xx 2026
प्रपत्र -VI
(भाग-घ)
[विवनयम 17 (2) देखें+
कें द्रीय बॉयलसष बोडष से "प्रवस् फाउंडरी/फोजष" के रूप में अवधसूवचत वकए जाने की मांग करने
िाली
फाउंडरी/फोजष द्वारा उत्तर की जाने िाली प्रश्नािली
1. फमय/कों पनी का पोंजीकृ त नाम और पता:
2. कारखाने का पता:
3. वजस ि य कारखाना स्थावपत वकया गया था:
4. फाउोंडरी/फोजय की िमता:
5. (i) फोवजिंग/काक्तस्टोंग के उत्पादन की िमता:
(ii) फोवजिंग/काक्तस्टोंग का अवधकतम िजन और आकार:
6. फमय/कों पनी द्वारा वकए गए कायय के प्रकार का विस्तृत वििरण:
7. काक्तस्टोंग/फोवजिंग की सामग्री (लौह-सादा या वमश्र धातु स्टील, अलौह वमश्र धातु):
8. प्रत्येक वकस्भ में उत्पावदत फोवजिंग/काक्तस्टोंग की रेंज:
9. कारखाने के भीतर उपलब्ध परीिण सुविधाएों:
10. परीिण सुविधा का वििरण, अथायतट रासायवनक और भौवतक परीिण:
11. आयोवजत परीिण के प्रकार:
12. यवद हाों, तो वकसके द्वारा आयोवजत वकया गया?
13. क्या फमय/कों पनी द्वारा वकए गए परीिण देश के अन्य सोंगठनो ोंको वीकीकायय हैं? यवद ऐसा है तो वकसके
द्वारा?
14. क्या फमय/कों पनी भारतीय बॉयलर विवनयम, 2026 के अनुसार परीिण करने के वलए तैयार है ?
15. क्या फमय/कों पनी को वकसी अन्य देश में "प्रवसद् फाउोंडरी/फोजय" के रूप में मान्यता प्राप्त है?
16. क्या फमय/कों पनी भारतीय बॉयलर विवनयम, 2026 न्यूनतम आिश्यकताओ ों को पूरा करने िाले वकसी
भी राष्ट सरीय/अोंतरायष्ट सरीय विवनदेशो ोंके अनुसार फोवजिंग/काक्तस्टोंग का उत्पादन करने की क्तस्थवत में है :
17. क्या फमय/कों पनी के पास वकसी मान्यता प्राप्त वनरीिण प्रावधकारी के वनरीिण के अोंतगयत भारतीय
बॉयलर विवनयमो ों के प्रािधान के अनुसार फोवजिंग/काक्तस्टोंग का उत्पादन करने का न्यूनतम दो ि य
का अनुभि है।
यवद हाों, तो उसका वििरण।538 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
18. क्या फमय/कों पनी भारतीय बॉयलर विवनयम, 2026 के प्रािधान के तहत प्रमाण पि प्रस्तुत करने के
वलए तैयार है ।
19. मान्यता के निीनीकरण के मामले में, क्या आपने वपछले पाोंच ि ों के दौरान भारतीय बॉयलर
विवनयमो ोंके तहत काक्तस्टोंग / फोवजिंग का वनमायण और आपूवतय "प्रवसद् फाउोंडरी / फोजय" के रूप में की
थी?
यवद हाों, तो उसका वििरण।
20. क्या फमय/कों पनी सेंटरल बॉयलसय बोडय द्वारा वनयुि सदस्ो ों के एक दल को अपनी वनमायण प्रवहृया,
इन-हाउस परीिण सुविधाओ ोंको वदखाने के वलए सहमत है।
21. क्या आप जानते हैं वक मान्यता के िल पाोंच ि य की अिवध के वलए है, जो हर पाोंच ि य के बाद नए वसरे
से मूल्ाोंकन पर निीकरणीय है?
नाम, हस्तािर और मुहर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 539
प्रपि VI (ड़) : आर01 वदनाोंक: xx.xx 2026
प्रपत्र – VI
(भाग-ड)
[विवनयम 17(2) देखें+
के न्द्रीय बॉयलसष बोडष से "प्रवस् ट्यूब/पाइप वनमाषता" के रूप में मान्यता चाहने िाले
ट्यूब/पाइप वनमाषता द्वारा उत्तर की जाने िाली प्रश्नािली
1. फमय/कों पनी का पोंजीकृ त नाम और पता:
2. कारखाने का पता:
3. वजस ि य कारखाना स्थावपत वकया गया:
4. वपछले तीन ि ों के दौरान ट्यूब/पाइप के उत्पादन की िमता और प्रवत टन भार
वििरण :
5. उत्पादन के तहत ट्यूब/पाइप के स्टील ग्रेड:
6. उत्पादन के तहत ट्यूबो/ों पाइपो ोंकी आकार सीमा:
7. ट्यूब/पाइप के वनमायण की प्रवहृया:
8. (क) क्या फमय/कों पनी कच्चे माल का उत्पादन कर रही है या कच्चे माल की खरीद कर रही
है।
(ख) यवद कच्चा माल खरीदा जाता है तो विगत तीन ि ों का हृय वििरण दें।
i. भारतीय बॉयलर विवनयमो ोंके तहत जाने-माने स्टील वनमायताओ ोंसे।
ii. अन्य स्रोतो ोंसे।
9. यवद खरीद 8(ख) (ii) के अनुसार है, तो बताएों वक क्या कच्चे माल का परीिण भारतीय बॉयलर
विवनयमो ोंके तहत ट्यूब वनमायता/पाइप वनमायता के पररसर में वकया जाता है।
10. यवद फमय/कों पनी कच्चे माल का उत्पादन कर रही है, तो बताएों वक क्या फमय/कों पनी को
भारतीय बॉयलर विवनयमो ोंके तहत प्रवसद् स्टील वनमायता के रूप में मान्यता प्राप्त है।
11. फमय/कों पनी के पास उपलब्ध प्रमुख विवनमायण सुविधाएों:
12. कायों के साथ उपलब्ध परीिण सुविधाएों:
13. ट्यूबो/ों पाइपो ों पर वकए गए परीिणो ों के प्रकार ( फमय के गुणित्ता वनयोंिण और वनरीिण
कवमययो ोंके साथ कच्चे माल के चरण से तैयार चरण तक पूणय गुणित्ता वनयोंिण योजना सोंलग्न
करें ):
14. विफलताओ ोंऔर अवीकीकृ वत का वििरण
(क) गैर-विनाशकारी परीिण (एनडीटी) द्वारा
(ख) विनाशकारी परीिण द्वारा।
15. क्या फमय / कों पनी ट्यूबो/ों पाइपो ों के वनमायण की क्तस्थवत में है और भारतीय बॉयलर
विवनयम, 2026 के प्रािधान के अनुसार उनकी आिश्यक परीिण सुविधाएों भी प्रदान
करती है ।540 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
16. क्या फमय/कों पनी के पास वकसी मान्यता प्राप्त वनरीिण प्रावधकारी के वनरीिण के तहत
भारतीय बॉयलर विवनयमो ों के प्रािधान के अनुसार ट्यूब/ पाइप बनाने का न्यूनतम दो ि य
का अनुभि है ।
यवद हाों, तो उसका वििरण।
17. क्या फमय/कों पनी भारतीय बॉयलर विवनयम, 2026 के प्रािधान के तहत प्रमाण पि प्रस्तुत
करने के वलए तैयार है ।
18. मान्यता के निीनीकरण के मामले में, क्या आपने वपछले पाोंच ि ों के दौरान भारतीय बॉयलर
विवनयमो ों के तहत ट्यूबो/ों पाइपो ों को "जाने-माने ट्यूब/पाइप वनमायता" के रूप में वनवमयत और
आपूवतय की थी?
यवद हाों, तो उसका वििरण।
19. उन फमों का नाम वजन्हें फमय/कों पनी ने आपूवतय की है ट्यूब/पाइप:
20. क्या फमय/कों पनी बोडय द्वारा वनयुि तीन सदस्ो ों िाली टीम को अपनी वनमायण प्रवहृया और
इन-हाउस सुविधाओ ोंको वदखाने के वलए सहमत है ।
21. क्या फमय/कों पनी को इस तथ्य की जानकारी है वक मान्यता के िल पाोंच ि य की अिवध के वलए
है, जो पुनः मूल्ाोंकन पर प्रत्येक पाोंच ि य की अिवध के बाद निीकरणीय है?
नाम , हस्तािर और मुहर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 541
प्रपि VI (च) : आर01 वदनाोंक: xx.xx.2026
प्रपत्र -VI
(भाग-च)
[विवनयम 17 (2) देखें+
कें द्रीय बॉयलसष बोडष से "सुप्रवस् सामग्री परीिण प्रयोगशाला" के रूप में मान्यता चाहने िाली
प्रयोगशाला के द्वारा उत्तर वदये जाने के वलए प्रश्नािली
1. प्रयोगशाला का पोंजीकृ त नाम और पता:
2. प्रयोगशाला का पता:
3. िह ि य वजसमें प्रयोगशाला की स्थापना हुई :
4. (क) क्या प्रयोगशाला को कें द्र सरकार या राज्य सरकार द्वारा मान्यता प्राप्त है:
(ख) यवद हाों, तो कृ पया मान्यता का वििरण दें:
5. शाखा या सहयोगी प्रयोगशाला का नाम और पता, यवद कोई हो:
6. उत्पादो ोंके परीिण के वलए प्रयोगशाला वकतने समय से कायय कर रही है?
7. गैर-विनाशकारी या विनाशकारी परीिण करने के वलए प्रयोगशाला में उपलब्ध उपकरण या मशीनें:
8. प्रयोगशाला द्वारा वकए गए परीिणो ोंके प्रकार और श्रेणी:
9. परीिण कमी और उनकी योग्यता या अनुभि का वििरण:
10. क्या आप भारतीय बॉयलर विवनयम, 2026 की आिश्यकताओ ों के अनुसार नमूनो ों का कड़ाई से
परीिण करने के वलए तैयार हैं ?
11. क्या अनुमोवदत प्रयोगशाला के रूप में मान्यता के वलए आपका अनुरोध वकसी प्रावधकारी द्वारा
अवीकीकार कर वदया गया है? यवद हाों, तो कृ पया उसका वििरण दें।
12. क्या आप उन उत्पादो ों के वलए प्रमाण पि जारी करने के वलए तैयार हैं वजनका आप भारतीय
बॉयलर विवनयम, 2026 के प्रारूपो ोंमें परीिण करते हैं ?
13. क्या आपके पास वकसी मान्यता प्राप्त वनरीिण प्रावधकारी की देखरेख में भारतीय बॉयलर विवनयमो ों
के प्रािधान के अनुसार परीिण करने का न्यूनतम दो ि य का अनुभि है।
यवद हाों, तो उसका वििरण
14. मान्यता के निीनीकरण के मामले में, क्या आपने वपछले पाोंच ि ों के दौरान भारतीय बॉयलर
विवनयमो ोंके प्रािधानो ोंके तहत परीिण वकए थे?
यवद हाों, तो उसका वििरण
15. क्या आप बोडय द्वारा वनयुि तीन सदस्ो ों िाली टीम को अपनी प्रयोगशाला और उसके अोंदर की
सुविधाएों वदखाने के वलए सहमत हैं ?
16. क्या आप जानते हैं वक मान्यता के िल पाोंच ि य की अिवध के वलए िैध है, जो नए मूल्ाोंकन पर
पाोंच ि य के वलए निीकरणीय है?
नाम, हस्तािर और मुहर542 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि VI (छ) : आर01 वदनाोंक: xx.xx 2026
प्रपत्र- VI
(भाग-छ)
[विवनयम 17 (2) देखें+
विवनयम 313 से 315 के तहत कें द्रीय बॉयलर बोडष से "अिशेर् जीिन मूल्ांकन संगठन" के रूप
में
मान्यता चाहने िाली फमष द्वारा उत्तर वदये जाने िाली प्रश्नािली
1. फमय/कों पनी का पोंजीकृ त नाम और पता:
2. फमय /कों पनी का पता :
3. िह ि य वजसमें फमय/कों पनी की स्थापना की गई थी:
4. (क) क्या फमय/कों पनी को कें द्र सरकार या राज्य सरकार द्वारा मान्यता प्राप्त है:
(ख) यवद हाों, तो मान्यता का वििरण प्रस्तुत करें:
5. शाखा या सहयोगी फमय का नाम और पता, यवद कोई हो:
6. आपकी फमय वकतने समय से बॉयलर और बॉयलर के पुजों के अिशे जीिन मूल्ाोंकन का कायय कर
रही है:
7. गैर-विनाशकारी या विनाशकारी परीिण करने के वलए प्रयोगशाला में उपलब्ध उपकरण या मशीनें:
8. फमय/कों पनी द्वारा वकए गए परीिणो ोंका प्रकार और श्रेणी :
9. परीिण कमी, उनकी योग्यता और उनके अनुभि का वििरण:
10. क्या आप भारतीय बॉयलर विवनयम, 2026 की आिश्यकताओ ों के अनुसार नमूनो ों का कड़ाई से
परीिण करने के वलए तैयार हैं ?
11. क्या आपके एक वीकीकृ त सोंगठन के रूप में मान्यता प्राप्त करने के अनुरोध को वकसी प्रावधकारी
द्वारा अवीकीकार वकया गया है? यवद हाों, तो जानकारी दें।
12. क्या आप भारतीय बॉयलर विवनयम, 2026 के प्रारूपो ोंमें अनुशोंवसत परीिणो ोंके वलए प्रमाण पि जारी
करने के वलए तैयार हैं ?
13. मान्यता के निीनीकरण के मामले में, क्या आपने वपछले पाोंच ि ों के दौरान भारतीय बॉयलर
विवनयमो ोंके तहत बॉयलर और बॉयलर के पुजों का अिशे जीिन मूल्ाोंकन वकया था ?
यवद हाों, तो उसका वििरण।
14. क्या आप बोडय द्वारा वनयुि तीन सदस्ो ों िाली टीम को अपनी प्रयोगशाला और आोंतररक सुविधाएों
वदखाने के वलए सहमत हैं?
15. क्या आप जानते हैं वक मान्यता के िल पाोंच ि य की अिवध के वलए िैध है, जो पुनः मूल्ाोंकन पर पाोंच
ि य के वलए निीकरणीय है।
नाम , हस्तािर और मुहर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 543
प्रपि VII (क) : आर01 वदनाोंक: xx.xx 2026
प्रपत्र – VII
(भाग-क)
[विवनयम 19 देखें]
राष्टरीय प्रतीक
हृम सोंख्या ………………………… फ़ाइलसोंख्या ……………………
कें द्रीय बॉयलर बोडष
वनरीिण प्रावधकरण के अनुमोदन का प्रमाण पत्र
यह प्रमावणत वकया जाता है वक:
मैससय ________________________________
________________________________
________________________________
____________________________________ की वनरीिण और गुणित्ता प्रबोंधन प्रणाली का कें द्रीय बॉयलर
बोडय द्वारा मूल्ाोंकन वकया गया है और भारतीय बॉयलर विवनयम, 2026 के विवनयम 19 के तहत सोंचालन
के वलए इसे एक वनरीिण प्रावधकरण के रूप में मान्यता प्रदान की गई है ।
यह प्रमाणपि पाोंच ि य के वलए िैध है, यानी …………………
िैधता भारतीय बॉयलर विवनयम, 2026 के प्रािधानो ों के तहत वनधायररत गुणित्ता वनयोंिण के अनुपालन के
अध्यधीन है ।
_______________
जारी करने की तारीख
प्रमाणपि सोंख्या
सवचि544 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि VII (ख): आर01 वदनाोंक: xx.xx 2026
प्रपत्र – VII
(भाग-ख)
[विवनयम 19 देखें]
राष्टरीय प्रतीक
हृम सोंख्या ………………………… फ़ाइलसोंख्या ……………………
कें द्रीय बॉयलर बोडष
सिम प्रावधकरण के अनुमोदन का प्रमाण पत्र
यह प्रमावणत वकया जाता है वक
मैससय __________________________
________________________________
________________________________
__________________________________की िेल्डर प्रणाली के परीिण का कें द्रीय बॉयलर बोडय द्वारा
मूल्ाोंकन वकया गया है और भारतीय बॉयलर विवनयम, 2026 के विवनयम 19 के तहत सोंचालन के
वलए इसे एक सिम प्रावधकरण के रूप में मान्यता प्रदान की गई है ।
यह प्रमाणपि पाोंच ि य के वलए िैध है, यानी ………………
िैधता, भारतीय बॉयलर विवनयम, 2026 के प्रािधानो ों के तहत वनधायररत गुणित्ता वनयोंिण के अनुपालन के
अध्यधीन है ।
______________
जारी करने की ताररख
प्रमाणपि सोंख्या
सवचि[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 545
प्रपि VII (ग): आर01 वदनाोंक: xx.xx 2026
प्रपत्र – VII
(भाग-ग)
[विवनयम 19 देखें]
राष्टरीय प्रतीक
हृम सोंख्या ………………………… फ़ाइल सोंख्या ……………………
कें द्रीय बॉयलर बोडष
प्रवस् टील वनमाषता के वलए अनुमोदन का प्रमाण पत्र
यह प्रमावणत वकया जाता है वक कें द्रीय बॉयलर बोडय द्वारा मैससय
_____________________________
_____________________________
_____________________________
की वनरीिण और गुणित्ता प्रबोंधन प्रणाली का मूल्ाोंकन वकया गया है और भारतीय बॉयलर
विवनयम, 2026 के विवनयम 19 के तहत _____________ के वनमायण के वलए उनके
___________________________________पर क्तस्थत कारखाने को विख्यात स्टील वनमायता के रूप में मान्यता
प्रदान की गई है।
यह प्रमाणपि पाोंच ि य के वलए िैध है, यानी _______________ तक
िैधता, भारतीय बॉयलर विवनयम, 2026 के प्रािधानो ों के तहत वनधायररत गुणित्ता वनयोंिण के अनुपालन के
अध्यधीन है ।
_______________
जारी करने की तारीख
प्रमाणपि सोंख्या
सवचि546 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि VII (घ) : आर01 वदनाोंक: xx.xx 2026
प्रपत्र – VII
(भाग-घ)
[विवनयम 19 देखें]
राष्टरीय प्रतीक
हृम सोंख्या ………………………… फ़ाइल सोंख्या ……………………
कें द्रीय बॉयलर बोडष
प्रवस् ढलाई (फाउ् डरी) के वलए अनुमोदन का प्रमाण पत्र
यह प्रमावणत वकया जाता है वक कें द्रीय बॉयलर बोडय द्वारा मैससय_______________ की वनरीिण और
गुणित्ता प्रबोंधन प्रणाली मूल्ाोंकन वकया गया है और भारतीय बॉयलर विवनयम, 2026
के विवनयम 19 के तहत उनके _____________________________
_____________________________
____________________________
क्तस्थत कारखाने को ___________________के वनमायण के वलए एक प्रवसद् फाउोंडरी के रूप में मान्यता प्रदान
की गई है
यह प्रमाणपि पाोंच ि य के वलए िैध है, यानी _______________ तक
िैधता, भारतीय बॉयलर विवनयम, 2026 के प्रािधानो ों के तहत वनधायररत गुणित्ता वनयोंिण के अनुपालन के
अध्यधीन है ।
______________
जारी करने की ताररख
प्रमाणपि सोंख्या
सवचि[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 547
प्रपि VII (ङे़ ):आर01 वदनाोंक: xx.xx 2026
प्रपत्र – VII
(भाग-ङ)
[विवनयम 19 देखें]
राष्टरीय प्रतीक
हृम सोंख्या ………………………… फ़ाइल सोंख्या ……………………
कें द्रीय बॉयलर बोडष
प्रवस् फोजष के वलए अनुमोदन का प्रमाण पत्र
यह प्रमावणत वकया जाता है वक कें द्रीय बॉयलर बोडय द्वारा
मैससय __________________________
__________________________
__________________________
की वनरीिण और गुणित्ता प्रबोंधन प्रणाली का मूल्ाोंकन वकया गया है और भारतीय बॉयलर
विवनयम, 2026 के विवनयम 19 के तहत उनके _______________________क्तस्थत कारखाने को
__________________ वनमायण के वलए एक प्रवसद् फोजय के रूप में मान्यता प्रदान की गई है
यह प्रमाणपि पाोंच ि य के वलए िैध है, यानी _______________ तक
िैधता, भारतीय बॉयलर विवनयम, 2026 के प्रािधानो ों के तहत वनधायररत गुणित्ता वनयोंिण के अनुपालन के
अधीन है ।
_______________
जारी करने की तारीख
प्रमाणपि सोंख्या
सवचि548 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि VII (च): आर01 वदनाोंक: xx.xx 2026
प्रपत्र – VII
(भाग-च)
[विवनयम 19 देखें]
राष्टरीय प्रतीक
हृम सोंख्या ………………………… फ़ाइल सोंख्या ……………………
कें द्रीय बॉयलर बोडष
प्रवस् ट्यूब वनमाषता के वलए अनुमोदन का प्रमाण पत्र
यह प्रमावणत वकया जाता है वक कें द्रीय बॉयलर बोडय द्वारा मैससय __________________________की
वनरीिण और गुणित्ता प्रबोंधन प्रणाली का मूल्ाोंकन वकया गया है और भारतीय बॉयलर विवनयम, 2026
के विवनयम 19 के तहत उनके _______________________
_______________________
_______________________
क्तस्थत कारखाने को _______________________ से ________________________________ तक के आकार के
ट्यूबो ोंके वनमायण के वलए एक प्रवसद् ट्यूब वनमायता के रूप में मान्यता प्रदान की गई है।
यह प्रमाणपि पाोंच ि य के वलए िैध है, अथायत _______________ तक
िैधता, भारतीय बॉयलर विवनयम, 2026 के प्रािधानो ों के तहत वनधायररत गुणित्ता वनयोंिण के अनुपालन के
अध्यधीन है ।
_______________
जारी करने की तारीख
प्रमाणपि सोंख्या
सवचि[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 549
प्रपि VII (छ):आर01 वदनाोंक: xx.xx 2026
प्रपत्र – VII
(भाग-छ)
[विवनयम 19 देखें )]
राष्टरीय प्रतीक
हृम सोंख्या ………………………… फ़ाइल सोंख्या ……………………
कें द्रीय बॉयलर बोडष
प्रवस् पाइप वनमाषता के वलए अनुमोदन का प्रमाण पत्र
यह प्रमावणत वकया जाता है वक कें द्रीय बॉयलर बोडय द्वारा मैससय __________________________की
वनरीिण और गुणित्ता प्रबोंधन प्रणाली का मूल्ाोंकन वकया गया है और भारतीय बॉयलर
विवनयम, 2026 के विवनयम 19 के तहत उनके ________________________
_______________________
_______________________
क्तस्थत कारखाने को __________________________ से _______________________ तक के आकार के पाइप
के वनमायण के वलए एक प्रवसद् पाइप वनमायता के रूप में मान्यता प्रदान की गई है।
यह प्रमाणपि पाोंच ि य के वलए िैध है, यानी _______________ तक
िैधता, भारतीय बॉयलर विवनयम, 2026 के प्रािधानो ों के तहत वनधायररत गुणित्ता वनयोंिण के अनुपालन के
अधीन है ।
_______________
जारी करने की तारीख
प्रमाणपि सोंख्या
सवचि550 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि VII (ज): आर01 वदनाोंक: xx.xx 2026
प्रपत्र - VII
(भाग-ज)
[विवनयम 19 देखें]
राष्टरीय प्रतीक
हृम सोंख्या ………………………… फ़ाइल सोंख्या ……………………
कें द्रीय बॉयलर बोडष
प्रवस् सामग्री परीिण प्रयोगशाला के अनुमोदन का प्रमाण पत्र
यह प्रमावणत वकया जाता है वक वनम्नवलक्तखत प्रयोगशाला के वनरीिण और सामग्री परीिण प्रणाली
के मूल्ाोंकन के बाद, कें द्रीय बॉयलर बोडय ने भारतीय बॉयलर विवनयम, 2026 के विवनयम 19 के तहत
इसे एक प्रवसद् सामग्री परीिण प्रयोगशाला के रूप में मान्यता प्रदान की है :-
मैससय _________________
_________________
_________________
यह प्रमाणपि पाोंच ि य के वलए िैध है, अथायत _____________ तक
नोट : मान्यता, भारतीय बॉयलर विवनयम, 2026 के प्रािधानो ोंके तहत वनवदयष्ट स मानको ोंके अनुसार होगी ।
_______________
जारी करने की तारीख
प्रमाणपि सोंख्या
सवचि[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 551
प्रपि VII(झ): आर01 वदनाोंक: xx.xx 2026
प्रपत्र VII
(भाग-झ)
[विवनयम 19 देखें]
राष्टरीय प्रतीक
हृम सोंख्या ………………………… फ़ाइल सोंख्या ……………………
कें द्रीय बॉयलर बोडष
विख्यात अिशेर् जीिन मूल्ांकन संगठन के रूप में अनुमोदन का प्रमाण पत्र
यह प्रमावणत वकया जाता है वक वनम्नवलक्तखत फमय के वनरीिण और सामग्री परीिण प्रणाली के
मूल्ाोंकन के बाद, कें द्रीय बॉयलर बोडय ने इसे भारतीय बॉयलर विवनयम, 2026
के विवनयम 19 के तहत एक प्रवसद् अिशे जीिन मूल्ाोंकन सोंगठन के रूप में मान्यता प्रदान की है ।
मैससय _____________________
_________________
यह प्रमाणपि पाोंच ि य के वलए िैध है, यानी _______________ तक
_______________
जारी करने की तारीख
प्रमाणपि सोंख्या
सवचि552 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि VIII:आर00 वदनाोंक: xx.xx.2026
प्रपत्र VIII
(विवनयम 293)
वनमाषता का नाम और पता
बॉयलर घटको ंके वलए अंवतम वनरीिण ररपोटष
ररपोटष संख्या: वदनांक:
यह प्रमावणत वकया जाता है वक नीचे वदए गए दबाि भागो ंका भारतीय बॉयलर विवनयम, 2026
के तहत वनरीिण वकया गया और उ् हें साफ वकया गया है
बॉयलर संख्या:
हृ. उत्पाद की आरेखण वििरण मात्रा सिम व्यल्पि का
सं. पहचान संख्या सं. पहचान
वचन्ह
वनमाषता के प्रवतवनवध के हिािर और मुहर सिम व्यल्पि का नाम और हिािर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 553
प्रपि IX:आर01
वदनाोंक: xx.xx 2026
प्रपत्र IX
[विवनयम 295 (7) और 295 (8) देखें+
विवनयम 311 के तहत प्रमाणन के बारह/छत्तीस महीने बाद अनुबंध ‘ज’ तथा अनुबंध ‘झ’ के
अनुसार बॉयलर के वनरीिण के वलए आिेदन के साथ प्रिुत वकए जाने िाले वििरण
1. मावलक का नाम और पता
2. बॉयलर की पोंजीकरण सोंख्या
3. भाप का दबाि और तापमान
4. भाप उत्पादन की दर
5. ताप सतह
6. वनमायण का ि य
7. बॉयलर का सोंविप्त वििरण
8. वनमायण का प्रकार (ररिेटेड या िेल्डेड)
9. फ़ायर वकया हुआ या िेस् ट हीट बॉयलर
10. पोंजीकरण की वतवथ
11. सरकार द्वारा दी गई वपछली छू ट का वििरण, यवद कोई हो
12. वपछले िाव यक वनरीिण की वतवथ
13. ितयमान प्रमाणपि की समाक्तप्त वतवथ
14. िह अवधकतम कायय दबाि वजस पर वपछले प्रमाणपि जारी वकया
गया था
15. वपछली मरम्मत का वििरण (ि य-िार)
16. वपछले प्रमाण पि में दजय की गई वटप्पणी
17. बॉयलर फ़ीड िॉटर की गुणित्ता
18. क्या फीड पोंप ितयमान में अपेवित सोंख्या में सोंतो जनक कायय करने की क्तस्थवत में हैं?
19. शेल/डरम और सुपर हीटर पर लगे सुरिा िाल्वो ोंकी सोंख्या
20. बॉयलर में उपलब्ध कराए गए सूट ब्लोअरो ोंकी कु ल सोंख्या
21. काम करने की क्तस्थवत में सूट ब्लोअरो ोंकी सोंख्या554 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
22. क्या सुरिा िाल्व वडजाइन दबाि पर या उससे कम पर सोंतो जनक
ढोंग से ब्लो कर रहे हैं?
23. जैसा वक ऑपरेवटोंग के वसोंग लीिर द्वारा सत्यावपत वकया गया है, क्या
सेफ्टी िॉल्व एसेंबली जैवमोंग से मुि है?
24. क्या उच्च और वनम्न जल स्तर अलामय अच्छी क्तस्थवत में है?
25. क्या मुख्य स्टीम स्टॉप िाल्व, फीड चेक िाल्व, ब्लो डाउन िाल्व और मास्टर दबाि गेज काम करने
की क्तस्थवत में हैं?
26. क्या विवनयम 182 के अनुसार वीकचावलत बॉयलरो ों के वलए अवतररि आिश्यकताओ ों का अनुपालन
वकया जाता है? (यवद 'नही'ों है तो वििरण दें)
27. मुख्य दबाि गेज, तापमान सोंके तक/ सुपरहीटर के वलए ररकॉडयर,
हॉट रीहीट, कोल्ड रीहीट और मुख्य भाप लाइन के अोंशाोंकन की
वपछली तारीख।
28. (क) वपछली तारीख जब बॉयलर सुरिा उपकरणो ोंका सोंतो जनक परीिण वकया गया और उसका
वििरण।
(ख) वपछली तारीख जब वसमुलेशन द्वारा बॉयलर सुरिा उपकरणो ोंका परीिण वकया गया था।
29. वपछले बारह महीनो ोंमें बॉयलर के रुकने के कारणो ोंऔर मरम्मतो ोंका वििरण
30. बॉयलर हाउस के वनयोंिण कि में उपकरणो ोंऔर वनयोंिणो ोंमें ितयमान में पाई गई अवनयवमतताएों,यवद
कोई हो ों
31. ितयमान बॉयलर ररसाि का वििरण
32. बॉयलर का ितयमान पररचालन दबाि
33. क्या पानी की गुणित्ता का ऑनलाइन परीिण वकया जाता है (कु ल घुवलत ठोस (टीडीएस) सवहत
विश्ले ण के मूल्ो ोंको दशायने िाली परीिण ररपोटय की प्रवत सोंलग्न करें)
34. बताएों वक इस तरह के परीिण वकस अोंतराल पर वकए जाते हैं
35. बॉयलर को वपछली बार आोंतररक और/या बाहरी सफाई के वलए
कब खोला गया था?
36. बताएों वक ऐसी सफाई वकस अोंतराल पर की जाती है
37. क्या वपछले बार जब बॉयलर को वनरीिण के वलए पेश वकया गया था
तब से कोई शट डाउन हुआ है?
38. क्या बॉयलर का काम करने का दबाि अतीत में प्रमावणत सीमा से अवधक हुआ है? यवद कोई हो तो
वििरण दें
39. पूिय में हुई बॉयलर दुघयटना का वििरण, यवद कोई हो
40. बॉयलर ऑपरेशन इोंजीवनयर/अटेंडेंट की सूची
41. अवधवनयम के अनुपालन में पूिय में देखी गई अवनयवमतताएों, यवद
कोई हो ों
42. िेस्ट हीट बॉयलसय को छू ट देने के वलए सेंटरल बॉयलसय बोडय द्वारा वनधायररत वदशा-वनदेशो ोंको पूरा वकया
गया है या नही?ों
महाप्रबोंधक (जनरेशन) का नाम और हस्तािर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 555
उस सिम व्यक्ति की वटप्पवणयाों वजन्होनों े बॉयलर हाउस के जाोंच के दौरे के उपरोि वििरण की सत्यता
का सत्यापन वकया गया है।
सिम व्यक्ति का नाम और हस्तािर556 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि X : आर01 वदनाोंक: xx.xx.2026
प्रपत्र -X
[विवनयम 300 (2)]
बॉयलर अवधवनयम 2025 की धारा 14 के तहत अनंवतम आदेश
……………………… को बॉयलर (पोंजीकरण सोंख्या ……………) बॉयलर रेवटोंग …………… ……………
द्वारा वनवमयत और _________वनमायता सोंख्या वडजाइन दबाि ……………… वकग्रा / सेमी 2 (जी) पर इसका
उपयोग करने की अनुमवत है, यवद इसकी तारीख से छह महीने के भीतर एक प्रमाण पि जारी करने
के वलए लोंवबत वकया गया या इनकार वकया तो इसके उपरान्त यह आदेश अमान्य हो जाएगा।
वदनाोंक : …………… बॉयलरो ोंके वनरीिक[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 557
प्रपि XI:आर01 वदनाोंक: xx.xx.2026
प्रपत्र- XI
(विवनयम 306)
बॉयलर वनरीिण विभाग
बॉयलर पोंजीकरण सोंख्या
वनरीिण पुल्पिका ज्ञापन
या
पंजीकरण पुल्पिका558 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
सामान्य
वजला…………………………………………
मावलक…………………………………………
कारखाने का पता …………………………
वनकटतम रेलिे स्टेशन ………………
कारखाना …………………………… है स्टेशन से ………………………… वकमी
काम या कारखाना…………………………
काम करने का मौसम ……………………… ……
बॉयलर …………………………… में ……………………………………………………… को पोंजीकृ त है
रवजस्टर पुक्तस्तका सोंख्या …………………………… पृष्…………………………………………… ……
पोंजीकरण सोंख्या………………………… ………………………………… को सत्यावपत की गई।
बॉयलर का वडजाइन दबाि …………………
बॉयलर रेवटोंग …………………………… जााँच शुल्क………………………………………
पोंजीकरण पुस्तक …………….. पर ………………………………………………को दायर की गई
स्थानान्तरण इत्यावद पर वटप्पणी।
अनंवतम आदेश और प्रमाणपत्र अवभलेख
शुल्क भुगतान वनरीिण प्रमाणपि प्रमाण बॉयलर मुख्य स्टीम बॉयलर उपयोग िाष्पीकरण वनरीिक /
(रुपए) की की वतवथ सोंख्या पि का वडजाइन आउटलेट रेवटोंग वकया गया टन/घोंटा या सिम
वतवथ और की दबाि तापमान(वडग्री फ्यूल वकग्रा/घोंटा व्यक्ति के
वदनाोंक अिवध वकग्रा/सेमी 2 (जी) सेक्तियस) आद्यािर
वििरण और आयाम
बॉयलर का प्रकार: अग्रणी आयाम:
वनमायता: प्रत्यावशत कायय दबाि:
मुख्य स्टीम आउटलेट तापमान
बनाने का स्थान और ि य: वनमायता की सोंख्या:
बॉयलर का वििरण:
वनमायता की मुहर का वििरण[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 559
मुहर की क्तस्थवत ……………………
वनमाषता का प्रमाणपत्र
बॉयलर नाम………………………
वनमायता विवनमायण, …………… वकग्रा / सेमी² (जी) के वलए हाइडरोवलक परीिण आरेखण सोंख्या
…… ---प्राप्त
वनरीिण नाम………………………
प्रावधकारी सामग्री, वनमायण, पययिेिण, हाइडरोवलक परीिण के परीिण ……………… प्राप्त ……………
दबाि भागो ंका वििरण
हृ. सों. दबाि पुजे का नाम आकार सामग्री विशे वििरण
बेलनाकार शेल
(क) (ख)
शेल या मड डरम स्टीम डरम
पुजों के नाम
सोंख्या
अोंत प्लेटो ोंके बीच की लोंबाई
एोंड प्लेट सीम के बीच की लोंबाई
सबसे बड़े बेल्ट् के अोंदर व्यास
प्लेटो ोंकी मोटाई
प्लेवटोंग की बेल्ट्ो ोंकी सोंख्या
लम्बित सीम
क्तस्थवत (बजे)
पररधीय सीम
सीमो ोंकी सोंख्या (अोंत और भीतरी)
शेल एंड प्लेट और टे
सपाट, धुला हुआ, अधयगोलाकार (…………………………………… टुकड़ो ोंमें) न रुका हुआ, न फ्लेंज वकया हुआ
ले स
प् टट व्यास (बाहर), सामने …………… पीछे, ………… हृाउन ………………… सबसे बड़ा िृत्त ………560 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
िहृता के सामने की विज्या …………… …… पीछे , ………………… हृाउन …………………
िहृता की विज्या, फ्लेंज का कोना, ……… शेल , ………………… फनेस, …… अपटेक, …
प्लेट, मोटाई, सामने …………… पीछे, … …… हृाउन ………………… ट्यूबप्लेट सामने, …… पीछे
शेल से जुड़े हृाउन या सामने, …………… ……
शेल से जुड़े, बैक एोंड, ………………………
अपटेक या फनेस हृाउन या फ्रों ट से जुड़े,……
फनेस फ्लू से जुड़े, बैक एोंड …………………
गसेट स्टे, सोंख्या एफई, टॉप, ……… तल , ………… बीई, टॉप, ………… तल, …………
लम्बित स्टे सोंख्या ……………… व्यास, ……………… …………… , ………………
ज
टे
लम्बित स्टे वपच रहता है, ऊध्वायधार िैवतज…………… पररधीय …………
स्
वियक डी , ……………………………………………………………………………………………… ……
ओ
मेनहोल, हैंड और साइट होल् स, दरिाजे और टैंड ब्लॉक
इनके अोंतगयत पुजे और सामग्री ……………………………… ………………………………………………
सोंख्या और क्तस्थवत
फ़्रे मयुि या फ्लेंज वकए हुए प्लेट
बॉयलर दरार, लोंबाई × चौड़ाई
फ़्रे म दरार, लोंबाई × चौड़ाई
फ्रे म अोंदर, बाहर, उठा हुआ, दबाया हुआ
ि फ्रे म ठोस, िेल्डेड, कास्ट
ो ह लम्बित अि पर फ़्रे म खोंड
न
मे दरिाजा, प्रकार और मोटाई
दरिाजा, अगर अोंदर, क्तस्पगोट क्लीयरेंस
बोल्ट्, सोंख्या, व्यास, थ्रेड नट
बोल्ट्, वपच सकय ल
कों पनसेशन छिे, चौड़ाई x मोटाई
सोंख्या ………………………………… आयाम ……………… क्तस्थवतयााँ ………………
स
ल् ो लगाए गए कों पनसेशन छिे …………… खण्ड …………………………
ह
ट
इ दरिाजे, प्रकार …………………… …… बोल्ट् व्यास,…… थ्रेड ……… क्तस्पगोट क्लीयरेंस ………
ा
स
सफाई प्लगो ोंकी सोंख्या ………………… व्यास,…………………………………… क्तस्थवत …………………
क ऊों चाई ……………………………… व्यास (बाहर), ऊपर,… तल … मोटाई ……… ……
ॉ
ल
ब् स्टॉप िाल्व के नीचे स्टैंडपाइप, ……… ऊों चाई, …… व्यास (बाहर) …… मोटाई ……… ……[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 561
फ्लेंज ……………………………
फायरबॉक्स वििरण
फ्लू ट्यूबो ंका वििरण
सदा सोंख्या स्टे कु ल लोंबाई …… विशे वििरण ………
………… ..
सादा, व्यास मोटाई, … फ्रों ट एोंड, िेल्डेड, एक्सपीड,
(बाहर) ……… िीडेड, फे रुल्ड । स्भोक एोंड ।,
िेल्डेड एक्सपीड, िीडेड , या…
स्टे व्यास (बाहर) मोटाई, …… …… एफई, िेल्डेड, एक्सपीड।, िीडेड,
……… एच………………… एसई, िेल्डेड, एक्सपीड, ..
सादे ट्यूबो ोंकी …… डी …………… सीजेड ………… ……
वपच, िी……
ब
स्टे ट्यूब की वपच, एच……………… डी …………… सीजेड ………… ……
ट्यू
िी… ……
स
ा
प
सादा सोंख्या , स्टे कु ल लोंबाई …… विशे वििरण ………
।
।
…………………
र
औ
सादा, व्यास मोटाई, … फ्रों ट एोंड, िेल्डेड, एक्सपीड,
।
(बाहर) ……… िीडेड, फे रुल्ड स्भोक एोंड ।,
िेल्डेड एक्सपीड, िीडेड , या…
स्टे व्यास (बाहर) मोटाई, …… …… एफई, िेल्डेड, एक्सपीड, िीडेड,
……… एसई, िेल्डेड, एक्सपीड, ..
प्लेन ट्यूब की वपच, एच डी सीजेड ……… ……
िी… ……………… … ……
स्टे ट्यूब की वपच, एच……………… डी सीजेड ……… ……
िी… …… ………
फनेस, हृाउन और अपटेक
िैवतज सोंख्या , ……………………………… प्रकार …………………………………
और प्रत्येक फनेस में क्तस्टफ़नर छिो ोंकी सोंख्या ………………… लम्बित सीम की क्तस्थवत
लोंबित कें द्र के मध्य
लोंबाई
अोंदर का व्यास562 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्लेट की मोटाई
हृॉस ट्यूब या
क्तस्टफ़नर की
क्तस्थवत
माउंवटंग और वफवटंग
सोंख्या व्यास प्रकार सामग्री बोल्ट् या िेल्ड
वकए हुए
िाल्व सुरिा
इत्यावद
सुरिा
मुख्य विराम
सहायक विराम
सोंभरण
ब्लो डाउन
इोंजेरर
विविध पानी के गेज, सोंख्या ………………………… प्रकार ………………… परीिण कॉक सोंख्या …………………
वफवटंग िाटर गेज, वनचले नट का ऊपरी भाग ……………………… वममी ऊपर …………………
दबाि नापने का योंि, प्रकार …………………… व्यास वममी में …
रेंज ……… वकग्रा/सेमी² (जी)
दबाि नापने का योंि, वनमायता …………………… सोंख्या …… लाल रेखा …………… वकग्रा/सेमी² (जी)
पर
फ़्यूवजबल प्लग, प्रकार ………………………… ……………………… क्तस्थवत ……………………
……
ब्लो डाउन पाइप ……… से जुड़ा है
फ़ीड उपकरण ……………………………………………………………………………………………
अवतररि वफवटोंग …………………………………………………………………………………
सुरिा िॉल्व
(क) (ख) (ग)
प्रत्येक चेस्ट में िाल्वो ोंकी सोंख्या………………………
प्रकार………………………………………………………
िाल्व सीट का व्यास (वममी) …………………
नैक का व्यास (वममी) ………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 563
आउटलेट का व्यास (वममी) ………………………
……………………………………………………………
सुरिा िाल्वो ंका आिश्यक िेत्र
सोंतृप्त भाप के वलए
E
A
C.P.
अवत गरम भाप के वलए
√
E = ; C = ; P = ; A =
के रूप में = ; T = ; A = ;
ताप सतह
कु ल ताप सतह
…………………………………………………………………………………………………………………………… िगय मीटर
बॉयलर रेवटोंग ……………………
हाइडरोवलक परीिण (पंजीकरण)
वनरीिक ……………………… परीिण की वतवथ ……………………… परीिण दबाि ………………… वकग्रा /
सेमी² (जी)
परीिण की अिवध …………… वमनट बॉयलर दबाि, गेज सोंख्या ………………… परीिण में उपयोग
………………
-------को --------------की की तुलना में बॉयलर दबाि गेज ………………………………… पाया गया।
परीिण में बॉयलर की क्तस्थवत …………………………………………………………………………………
ईोंट का काम ……………………………………… लैवगोंग ……………… ………………………………………
परीिण के अोंतगयत बॉयलर की क्तस्थवत ……………………………………………………………………
परीिण के अोंतगयत बॉयलर माउोंवटोंग की क्तस्थवत …………………………………………………………………
एमआई पुक्तस्तका …………………… द्वारा ……………………… को तैयार कर ……………………… को प्रस्तुत
वकया गया।
एमआई पुक्तस्तका की जाोंच ………………… द्वारा ………………………………………………………… को564 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
की गई ।
मुख्य वनरीिक/वनदेशक बॉयलर की वटप्पणी और हस्तािर
भाप परीिण (पंजीकरण)
वनरीिक ………………………………………………… परीिण की वतवथ …………………………………
बॉयलर का वडजाइन दबाि ………… वकग्रा / सेमी² ( जी ) ……
बॉयलर कनेक्शन ……………………………………… परीिण दबाि ……… वकग्रा / सेमी² ( जी )
उपयोग वकया गया ईोंधन आग की क्तस्थवत ……………………………
……………………………………………… डरॉट……………………………………… ……
सुरिा िाल्व को उठाया (क) ……………… वकग्रा / सेमी² (ख) …… वकग्रा / सेमी² ( जी )। (ग)
( जी ) …… वकग्रा / सेमी² ( जी ) पर उठाया गया
शुरुआत 5 10 15 वम. अोंतर
वमनट। वमवनट।
परीिण का समय ……………………… ……
शीशे में पानी की ऊाँ चाई………………
बॉयलर गेज द्वारा दबाि ………………
दबाि का सोंचय, (%)में ……………………………………………………………………
क्या सुरिा िाल्व बॉयलर को कु शलता पूियक राहत देते
हैं? ……………………………………………………………
भाप के तहत बॉयलर की क्तस्थवत ………………………………………………………………………
भाप के तहत माउोंवटोंग की क्तस्थवत ………………………………………………………………
िाशर या फे रूल की मोटाई ………………………………………………………………… ……
फीड पोंप या इोंजेरर ने काम वकया …………………………………………………………………………………
पानी के गेज का परीिण वकया गया ………………………………………………………………………
बॉयलर अटेंडेंट (या) बॉयलर ऑपरेशन इोंजीवनयर ……………………………………………………………
प्रमाणपि में दजय वकए जाने िाले सुरिा िाल्वो ोंपर भार की सीमा ………………………………………
बॉयलर के काम करने पर वटप्पवणयाँ
बॉयलर का उपयोग ………………………………………………………………………………… के वलए वकया जाता
है।
लगातार, रुक-रुक कर या मौसमी काम ……………………………………………………………
क्या बॉयलर को स्पेयर बॉयलर से राहत वमली[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 565
है? ………………………………………………………………………
फीड िॉटर की प्रकृ वत …………………………………………………………………………
प्रयुि ईोंधन …………………………… क्या मुवद्रत वनदेश बॉयलर के पास रखे जाते
हैं? ………………………
वनरीिक द्वारा अनुशोंवसत सफाई के बीच की अिवध ……………………………………
________________________________________________________________________________________
भाप-पाइप
मुख्य भाप-पाइपो ंकी योजना
जुडे हुए बॉयलरो ंकी पंजीकरण संख्या ……………………………
अन्य बॉयलर से अलग करने के वलए प्रािधान …………
वनरीिण और परीिण के अवभलेख
…………………… द्वारा ………………… को प्रथम वनरीिण करने के वलए
…………………………………वकग्रा/सेमी²( जी ) पहला हाइडरोवलक परीिण ...............................
वदनाोंक.....................
वनरीिण वटप्पवणयाँ
बॉयलर अटेंडेंट और बॉयलर ऑपरेशन इंजीवनयर का वििरण
दौरे की नाम ग्रेड प्रमाणपि सोंख्या जारी करने की ताररख
तारीख़566 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि XII:आर01 वदनाोंक: xx.xx.2026
प्रपत्र-XII
(विवनयम 310)
एक बॉयलर के उपयोग के वलए प्रमाण पत्र
बॉयलर की पोंजीकरण सोंख्या बॉयलर का प्रकार
बॉयलर रेवटोंग वनमायण का स्थान और ि य
अवधकतम वनरोंतर िाष्पीकरण
मावलक का नाम
बॉयलर की क्तस्थवत
मरम्मत
वटप्पवणयाों
--------------को -------------- हाइडरॉवलक रूप से परीिण वकया गया
प्रवत वकग्रा/सेमी 2 (जी) पर
मैं यह प्रमावणत करता हूों वक ऊपर िवणयत बॉयलर को मेरे/मुख्य वनरीिक द्वारा बॉयलर
अवधवनयम, 2025 की धारा 12/13 के प्रािधानो ों के तहत …………… वकग्रा/सेमी 2 के (जी) के अवधकतम
दबाि पर ________ से _______ अिवध के वलए काम करने की अनुमवत है ।
……………… सुरिा िाल्व की लोवडोंग ……………… वकग्रा / सेमी 2 (जी) से अवधक नही ोंहोनी चावहए
……………… को रु. ……………… शुल्क भुगतान वकया
वदनाोंक …………… 20 ……… का वदन------------------
नाम और हस्तािर
सिम व्यक्ति
प्रवतहस्तािररत
मुख्य वनरीिक
"शतों‛ के वलए पन्ना पलटें
शतेँ
(प्रपि XII की वपछली साइड)
(1) बॉयलर मे अवधवनयम की धारा 18 के अनुसार ही कोई अवतररि सोंरचनात्मक पररितयन, जोड़ या
निीनीकरण वकया जाएगा, अन्यथा नही।ों[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 567
(2) अवधवनयम की धारा 13 के प्रािधानो ोंके तहत यह प्रमाणपि लागू नही ोंरहेगा:
(क) उस अिवध की समाक्तप्त पर वजसके वलए इसे प्रदान वकया गया था; या
(ख जब बॉयलर में कोई दुघयटना हो जाती है; या
(ग) वजस बॉयलर की हीवटोंग सतह दो सौ िगय फु ट से कम हो, बॉयलर ऊध्वायधार नही ों होने के
कारण जब बॉयलर को स्थानाोंतररत वकया जाता है, या एक पोटेबल बॉयलर हो या िाहन
बॉयलर हो या
(घ) अवधवनयम की धारा 17 में वदए गए प्रािधान के अलािा, जब बॉयलर में कोई सोंरचनात्मक
पररितयन, पररिधयन या निीनीकरण वकया जाता है; या
(ड़) यवद मुख्य वनरीिक वकसी खास मामले में ऐसा वनदेश देता है,जब बॉयलर से जुड़े वकसी भी
स्टीम पाइप में कोई सोंरचनात्मक पररितयन, पररिधयन या निीनीकरण वकया जाता है; या
(च) बॉयलर के मावलक को मुख्य वनरीिक या वनरीिक का आदेश वमलने पर,जो इसके इस्तेमाल
पर इस आधार पर रोक लगाता है वक यह या इससे जुड़ा कोई भी बॉयलर उपकरण
खतरनाक क्तस्थवत में है।
अवधवनयम की धारा 15 के तहत, जब एक बॉयलर से सोंबोंवधत प्रमाण पि की अिवध समाप्त हो गई
हो, तो मावलक, बशते वक उसने उस अिवध की समाक्तप्त से पहले प्रमाण पि के निीनीकरण के वलए
आिेदन वकया हो, आिेदन पर आदेश जारी होने तक पूिय प्रमाणपि मे उिेक्तखत वडजाइन दबाि पर
बॉयलर का उपयोग करने का हकदार होगा, लेवकन इसे धारा 13 की उप-धारा (1) के खोंड (ख), (ग), (घ),
(ड़) और (च) में बताए गए वकसी भी मामले में बॉयलर के इस्तेमाल को अवधकृ त नही ों माना जाएगा, जो
प्रमाण पि की अिवध की समाक्तप्त के बाद होते है
(3) बॉयलर का उपयोग प्रमाण पि में वडजाइन दबाि के रूप में दजय वकए गए दबाि से अवधक दबाि में
नही ोंवकया जाएगा और न ही ऐसे वडजाइन दबाि से अवधक दबाि पर सुरिा िाल्व सेट वकया जाएगा ।
(4) बॉयलर का उपयोग ऐसी क्तस्थवत में नही ोंवकया जाएगा जो मावलक को सुरवित कायय के वलए यथोवचत
अनुकू ल ना लगे।
(5) अवधवनयम की धारा 12 की उप-धारा (6) के प्रािधानो ों के अनुसार, के िल प्रपि XII को पोंजीकरण के
समय मुख्य वनरीिक द्वारा प्रवतहस्तािररत वकया जाएगा ।
नोट : मावलक द्वारा इस बॉयलर के वििरण और आयाम के बारे में मुख्य वनरीिक को वनधायररत तरीके से
आिेदन और शुल्क का भुगतान करके प्राप्त वकया जा सकता है।568 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि XIII:आर01 वदनाोंक: xx.xx 2026
प्रपत्र XIII
[विवनयम 316 (2) देखें]
बॉयलर/इकोनोमाइज़र /टीम लाइन/फीड िॉटर लाइन के मरम्मतकताष के वलए प्रश्नािली प्रपत्र
1. (क) फमय का पोंजीकृ त नाम और उसका स्थायी पता
……………………………………………………………
(ख) काययशाला का पता:
2. स्थापना
ि य…………………………………………………………………………………………………………………………… …
3. िगीकरण के वलए आिेदन वकया-
(क) विशे श्रेणी (वकसी भी बॉयलर दबाि के वलए)
(ख) श्रेणी I (125 वकग्रा/सेमी2 तक के बॉयलर दबाि के वलए)
(ग) श्रेणी II (40 वकग्रा/सेमी2 तक के बॉयलर दबाि के वलए)
(घ) श्रेणी III (17.5 वकग्रा/सेमी2 तक के बॉयलर दबाि के वलए)
4. फमय द्वारा पहले वनष्पावदत वकए गए कायों के प्रकार, उनके वडजाइन दबाि , तापमान और शावमल
सामग्री के विशे सोंदभय, दस्तािेजी साक्ष्य के साथ
5. (क) क्या फमय को कभी वकसी बॉयलर वनदेशालय/वनरीिणालय द्वारा अनुमोवदत वकया गया है? यवद हाों,
तो वििरण दें
(ख) क्या भारतीय बॉयलर विवनयम, 2026 के तहत वकसी प्रावधकारी द्वारा एक मरम्मतकताय के रूप में
आपका मान्यता के वलए अनुरोध अवीकीकार वकया गया है?
यवद हाों, तो जानकारी दें
6. क्या आपके पास विवनयम 316 (4) (क) के अोंतगयत रेक्तरफायर/जनरेटर, ग्राइोंडर, सामान्य
उपकरण और टैकल, डाई पेनेटरेंट वकट, विस्तारक और माप उपकरण या कोई अन्य उपकरण
मौजूद हैं।
7. फमय में स्थायी रूप से काययरत तकनीकी कवमययो ोंके पदनाम, शैविक योग्यता और प्रासोंवगक अनुभि
सवहत की विस्तृत सूची (दस्तािेजो ोंकी प्रवतयाों सोंलग्न करें)
8. फमय द्वारा एक साथ वकतनी िवकिं ग साइटटस को हैंडल वकया जा सकता है?
9. क्या फमय वनयमो ोंके अनुरूप कायय को सख्ती से वनष्पावदत करने और कायय के उच्च स्तर को बनाए
रखने के वलए तैयार है?
10. क्या फमय इसके द्वारा वकए गए कायय के वलए पूरी वजम्मेदारी वीकीकार करने के वलए तैयार है और
यवद आिश्यक हो तो वकसी भी वििादास्पद मुद्दे को स्पष्ट स करने के वलए तैयार है?[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 569
11. क्या फमय, माोंगे जाने पर उवचत परीिण प्रमाण पि के साथ आिश्यक विवनदेशो ोंके वलए सामग्री की
आपूवतय करने की क्तस्थवत में है?
12. क्या फमय की अपनी कोई आोंतररक गुणित्ता वनयोंिण प्रणाली है? यवद हाों, तो वििरण दें
13. भारतीय बॉयलर विवनयम, 2026 के तहत एक सिम प्रावधकारी द्वारा जारी ितयमान प्रमाण पि की
प्रवतयो ोंके साथ वनयोवजत िेल्डर की सूची ।
फमय के अवधकृत हस्तािरकताय का नाम और
हस्तािर मुहर के साथ
वदनाोंक …………………
स्थान ………………
नोट 1: एक मरम्मतकताय के रूप में फमय की मान्यता दो ि य की अिवध के वलए होगी, तदोपराोंत िे उि
अिवध की समाक्तप्त से कम से कम दो महीने पूिय अपनी मान्यता के निीनीकरण के वलए आिेदन
करेंगे।
नोट 2: यवद मरम्मतकताय को जानबूझकर या अनजाने में अवधवनयम या विवनयमो ों के प्रािधानो ों का
उिोंघन करते हुए पाया जाता है, तो फमय को सभी राज्यो/ों सोंघ राज्य िेिो ों के मुख्य वनरीिको ों या
बॉयलर वनदेशको ों को सूवचत करते हुए इन्हें वनव द् सूची में डाल वदया जाएगा और वकसी भी
क्तस्थवत में निीनीकरण नही ोंवकया जाएगा।570 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि XIV:आर01 वदनाोंक: xx.xx.2026
प्रपत्र XIV
[ विवनयम 322 (3)+
बॉयलर अवधवनयम, 2025
बॉयलर वनरीिण विभाग
टीम पाइप और कनेिेड वफवटंग
पहचान संख्या
वनरीिण पुल्पिका का ज्ञापन
__________________________________________________________________________
विविध
वजला ………………………………………………………………………………………………………… ……
मावलक ………………………………………………………………………………………………………… ……
पता ……………………………………………………………………………………………………………
कारखाने का काम: …………………………………………………………………………………………………
उन बॉयलरो ों की पोंजीकरण सोंख्या वजससे पाइप और वफवटोंग लगे हुए हैं और वजनका वििरण इस ज्ञापन
जुड़ा हुआ है,
वटप्पणी वदनाोंक पररिधयनो ोंऔर पररितयनो ोंका वििरण
…………………… ……………………………………………………………………………………… ……
…………………… ……………………………………………………………………………………… ……
…………………… ……………………………………………………………………………………… ……
…………………… ……………………………………………………………………………………… ……
टीम पाइप और उनसे जुडी वफवटंग की योजना[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 571
अवभलेख योजना के वलए शुल्क और अनुमोदन
आरेखण स्टीम जुड़े शुल्क भुगतान योजना एमएडब्ल्यूपी अनुमोदन अनुमेय वनरीिक
सोंख्या पाइप पािो ों की वतवथ और वकग्रा/सेमी 2 (जी) तापमान ०C की
की की अवभन्यास वटप्पवणयाों
कुल सोंख्या का और
लोंबाई अनुमोदन आद्यािर
की सोंख्या
और तारीख
भाप पाइप-वििरण और आयाम
पररक्तस्थवत ……………………………………………………………………………………………………… ……
सोंलग्न बॉयलरो ोंकी पोंजीकरण सोंख्या ………………………………………………………………………
स्टीम पाइवपोंग वसस्टम में …………………………………………………………… शावमल हैं।
पाइप सामग्री …………………………………… व्यास (बाहर) ……………………………… ……
पाइपो ोंकी मोटाई ……………………………………… बनािट ………………………………………
फ्लेंजो ों की अटैचमेंट ……………………………………………………………………………………… ……
एल्बो , टीज आवद …………………………………………………………………………………………………
……………………………………………………………………………………………………………..
सहयोवगक ………………………………………………………………………………………………………………
लचीलापन …………………………………………………………………………………………… ……
वनकासी …………………………………………………………………………………………………
फ़ीड पाइप ………………………………………………………………………………………… ……
बाहरी व्यास …………………………………………… मोटाई ……………………………………………572 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
बनािट …………………………………………………………………………………………………………………
अवधकतम दबाि ………………………………… अवधकतम तापमान ……………………………… ……
जुड़ा हुआ पाि ………………………………………………………………………………… ……
सोंख्या …………………………………………………………………………………………………………………
प्रकार …………………………………………………………………………………………………………… ……
अवधकतम वीकीकायय कायय दबाि …………………………… अवधकतम वडजाइन तापमान
………………………………………
स्थापना की वतवथ …………………………………………………………………………………
अोंदर और बाहर का पहला वनरीिण …………………………………………………………………………………………
………………………………………………………………………………………………………………
............... वकग्रा /सेमी 2 पर के वलए .................द्वारा ________को फ़ीड पाइप्स का हाइडरोवलक
परीिण............. ...........................।
वटप्पवणयाों ……………………………………………………………………………………………………… ……
गणना
भाप पाइप: ………………………………………………………………………………………………………
……………………………………………………………………………………………………………
……………………………………………………………………………………………………………
……………………………………………………………………………………………………………
गणना
भाप पाइप: ………………………………………………………………………………………………………
……………………………………………………………………………………………………………
……………………………………………………………………………………………………………
……………………………………………………………………………………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 573
गणना
भाप पाइप: ………………………………………………………………………………………………………
……………………………………………………………………………………………………………
……………………………………………………………………………………………………………
……………………………………………………………………………………………………………
गणना
……………………………………………………………………………………………………………
……………………………………………………………………………………………………………
……………………………………………………………………………………………………………
……………………………………………………………………………………………………………
वनरीिक का नोट
……………………………………………………………………………………………………………
……………………………………………………………………………………………………………
……………………………………………………………………………………………………………574 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि XV:आर01 वदनाोंक: xx.xx.2026
प्रपत्र XV
[विवनयम 358 (3)+
वनरीिण प्रावधकारी का वनमाषणाधीन वनरीिण प्रमाण पत्र
हम यह प्रमावणत करते हैं वक ……………… प्रकार, ……………… एकोनोमाइसर, ……………… खण्डो ों
और ट्यूबो ों से वमलकर प्रत्येक खण्ड का …………… वकग्रा / सेमी 2 (जी) के वडजाइन दबाि के वलए
वनमायण वकया गया। मेससय ……………… ने हमारी देखरेख में और भारतीय बॉयलर विवनयम, 2026 के
अध्याय -11 में वनधायररत वनयमानुसार सिम व्यक्ति द्वारा वनमायण के विवभन्न चरणो ों में वनरीिण वकया गया
और इसकी वनमायण और कारीगरी सोंतो जनक थी और एकोनोमाइसर के वडजाइन और वनमायण के वलए
मानक शतों के अनुसार है।
प्रत्येक खण्ड पर पहचान वच्।
अन्य दबाि िाले वहस्से पर शाखा पाइप।
उसकी क्तस्थवत।
पूरा होने पर सिम व्यक्ति की उपक्तस्थवत में दस वमनट के वलए अनुभागो ों
को …………… वकग्रा/सेमी 2 (जी) के पानी के दबाि के अधीन परीिण वकया गया और इसने विवनयम 361
के तहत परीिण का सोंतो जनक ढोंग सामना वकया।
सिम व्यक्ति की उपक्तस्थवत में एकोनोमाइसर के वनमायण में प्रयुि सामग्री के नमूनो ों का परीिण
वकया गया और भारतीय बॉयलर विवनयम, 2026 के अध्याय -11 में वनधायररत परीिणो ों के अनुपालन में
पाया गया ।
हमने अपने आप को सोंतुष्ट स कर वलया है वक एकोनोमाइसर का वनमायण और आयाम हमारे द्वारा
हस्तािररत वनमायता आरेखण सोंख्या ………… में दशाषया गया है और हमारी जानकारी और विर्श्ास के
अनुसार यह हमारे द्वारा प्रवतहस्तािररत प्रपि XVI में वनमायता के वनमायण प्रमाण पि में दजय वििरण सही है।
वदनाोंक …………… …… वदन ……………
वनरीिण प्रावधकारी का नाम और हस्तािर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 575
प्रपि XVI:आर01 वदनाोंक: xx.xx.2026
प्रपत्र - XVI
[विवनयम 358 (4)+
कारखाने का पता
वनमाषता का विवनमाषण प्रमाण पत्र और परीिण
1. वििरण एकोनोमाइसर का प्रकार ट्यूबो ोंकी सोंख्या
अनुभागो ोंकी सोंख्या वकग्रा/सेमी 2 (जी)
इक्तच्छत कायय दबाि कु ल ताप
उत्पादन का ि य ट्यूबो ोंकी सतह
वििरण
2. वनरीिण ……………………… की देखरेख में वनवमयत इकोनोमाइजर
प्रावधकारी
खण्डो ोंका हाइडरॉवलक रूप से ……… वमनट के वलए परीिण वकया गया और ……
द्वारा परीिण के बाद वनरीिण वकया गया।
3. वनमायण और वििरण, आरेखण सोंख्या ……………………… में है।
कारीगरी सभी काक्तस्टोंग बाहरी दो ो,ों झरझरा स्थानो ोंऔर ब्लो-होल से मुि और वबना तोड़
मरोड़ वकए आयामो ोंके वलए सही हैं।
जहाों प्रकरणो ोंका प्रयोग वकया जाता है, िहाों धातु के साथ सोंतो जनक सोंलयन होता
है।
प्रकरणो ोंको उवचत रूप से सीसे से मुि धातु से वटन्ड् वकया जाता है
सभी स्क्रू थ्रेड क्तव्हटिथय फॉमय के है
सभी घटक भागो ोंका विवनमायण गेज को सीवमत करने के वलए वकया जाता है तावक
अदला बदली की पूरे प्रवहृया को सुरवित वकया जा सके ।
4. इकोनोमाइजर पाटटयस सामग्री वनमायता सिम व्यक्ति
और वफवटोंग की वटप्पवणयाों
प्रयुि सामग्री हेडर ट्यूब और/या
का वििरण पाइप्स िाल्व चेस्ट
बोल्ट्
भागो ंकी मोटाई और तन्यता परीिण-सीमा
5. एकोनोमाइसर का मोटाई तन्यता बल टन तक बााि की गेज की िाोंड और
वहस्सा 32nds . में सीवमत है सीमा % लोंबाई सोंख्या
हेडर576 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
ट्यूब
बोल्ट्
प्रमावणत वकया जाता है वक यहाों दजय वकए गए वििरण सही हैं और ऊपर िवणयत भागो ोंऔर वफवटोंग
का उपयोग इकोनोमाइजर के वनमायण और वफवटोंग में वकया गया है।
उपयोग वकए गए विवभन्न भागो ोंके सामने दशायये गए वििरण हमारे पास उपलब्ध वनमायता
प्रमाणपिो ोंके अनुसार हैं।
खण्ड और हमारे उपरोि कायों में एकोनोमाइजर के वडजाइन को मुख्य भागो ों का आरेखण
सोंख्या ............ के अनुसार पूरी तरह से अनुभाग और वप्रोंवसपल के साथ वमलान वकया गया है।
एकोनोमाइजर का वनमायण और वडजाइन भारतीय बॉयलर वनयमो ों के वडजाइन दबाि ............ वकलो
/सेमी 2 (जी) पर पालन करते हुए तैयार वकया गया है और हमारे उपयुयि कायों और खण्डो ों ने
…………………………… के वदन ……………20 वमनट के वलए हमारे वजम्मेदार प्रवतवनवध, वजसके हस्तािर
यहाों सोंलग्न हैं की की उपक्तस्थवत में सोंतो जनक रूप से ………… वकग्रा/सेमी 2 (जी) के जल परीिण का
सामना वकया ।
परीिण देखने िाले अवभयोंता के हस्तािर वनमायता का क्तस्थवत नाम
वदनाोंक ……… 20.. के वदन……… वनरीिण अवधकारी का नाम और हस्तािर
नोट : इस प्रमाणपि के साथ इकॉनोमाइजर और वनमायता के वनमायण प्रमाण पि के साथ तन्यता बल
और बााि के परीिण के पररणाम होगों े और यवद इकोनोमाइजर एक वनरीिण प्रावधकारी की
देखरेख में बनाया गया है तो प्रपि XV में उनका प्रमाण पि साथ में होगा ।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 577
प्रपि XVII आर01 वदनाोंक: xx.xx.2026
प्रपत्र XVII
प्रवतपणय [विवनयम 381 (5)+
सोंख्या
सोंख्या बॉयलर अवधवनयम, 2025 के तहत अनोंवतम आदेश
उस व्यक्ति या फमय का नाम वजसे —————————————————————————
अनोंवतम आदेश वदया गया है। ————————————को …………… द्वारा वनवमयत
इकोनोमाइजर का वििरण इकोनोमाइजर पोंजीकरण सोंख्या —————————
वनमायता की सोंख्या इकोनोमाइजर रेवटोंग ______ वनमायता सोंख्या का वडजाइन
दबाि …………… वकग्रा / सेमी 2 (जी) / अवधकतम तापमान
रेवटोंग
…………° C पर इस्तेमाल करने की अनुमवत है, मामले लक्तम्बत रहने
अनुमेय दबाि
तक या वकसी प्रमाण पि के जारी होने की तारीख से छह महीने के
अिवध
भीतर इनकार करने पर, यह आदेश अमान्य हो जाएगा।
वदनाोंक
वनरीिक
वदनाोंक ......... ……का वदन
वनरीिक578 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि XVIII:आर01 वदनाोंक: xx.xx.2026
प्रपत्र- XVIII
(विवनयम 385)
बॉयलर वनरीिण
विभाग
इकोनोमाइजर
पोंजीकरण सोंख्या
_____________________________________________________________________________________________
___
वनरीिण पुल्पिका ज्ञापन
या
पंजीकरण पुल्पिका
विविध
वजला ……………………………………………
मावलक …………………………………… ……
कारखाने का पता …………………… ……
वनकटतम रेलिे स्टेशन …………………………
इकोनोमाइजर ……………………… पर ………………………………को पोंजीकृ त है।
पोंजीकरण पुक्तस्तका सोंख्या ……………………… पृष् …………………………………………
पोंजीकरण सोंख्या ……………………… …… ………………………………… को सत्यावपत वकया
वडजाइन दबाि …………… …… गया।
इकोनोमाइजर रेवटोंग ………………… …… वकग्रा/सेमी 2 (जी) ……………………………………
को भरी गई।
पोंजीकरण पुक्तस्तका …………………
जााँच शुल्क …………………………………
स्थानाोंतरण आवद पर वटप्पवणयाों ………
…………………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 579
अनंवतम आदेश और प्रमाणपत्र अवभलेख
शुल्क भुगतान वनरीिण प्रमाणपि प्रमाणपि वडजाइन इकोनोमाइजर वटप्पवणयाों और
की वतवथ की वतवथ सोंख्या की अिवध का दबाि रेवटोंग वनरीिक का
और आद्यािर
वदनाोंक
एकोनोमाइसर का प्रकार ………………………………………
वनमायता …………………………………………………
इक्तच्छत कायय दबाि ………………… ……
बनाने का स्थान और ि य ………………… ……
वनमायता सोंख्या ……………………………………………
एकोनोमाइसर का वििरण …………………………
ट्यूबो ोंकी सोंख्या …………………………………………… …… लोंबाई ……………… व्यास ………………
मोटाई ……………………………………………… ……
आोंतररक आयाम ……………………………
हेडर की सोंख्या ………………………………………
हेडर की मोटाई ………………………………………
शी य शाखा पाइप की लोंबाई …………………………… मोटाई ……………………………………
बॉटम िाोंच पाइप की लोंबाई ………………………… मोटाई ..................................................
कै प ओपवनोंग्स के आयाम ………………………………
कै प बोल्ट् का व्यास …………………………………
माउंवटंग
सोंख्या व्यास प्रकार क्तस्थवत सामग्री
ररलीफ िाल्व …………………………………………… ……
स्टॉप िाल्व ………………………………………
ब्लो डाउन ………………………………580 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
थमायमीटर ………………………………………… ……
दबाि गेज ……………………………………… ……
अवतररि वफवटोंग ……………………………… ……
वनमाषता का प्रमाण पत्र
वनमायता का नाम ………………………………………………………………………
वनमायता का हाइडरोवलक परीिण दबाि ………………………………………………………………………
वनमायता की आरेखण सोंख्या ………………………………………………………………………
वनरीिण प्रावधकारी का नाम ………………………………………………………………………
सामग्री के वनमायता का नाम ………………………………………………………………………
ट्यूब …………………………………………………
प्रवहृया हेडर …………………………………………………
बोल्ट् …………………………………………………
परीिा के पररणाम
ट्यूब T E
हैडर T E
पाइप T E
बोल्ट् T
सल्फर %
फास्फोरस %
वनमायता का पहचान वच्
क्तस्थवत
गणना
हेडर
ट्यूब
शाखा पाइप
बोल्ट
ताप सतह[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 581
कु ल ताप सतह ………………………………………
इकोनोमाइजर रेवटोंग ……………
……… द्वारा की गई गणना … को प्रस्तुत की गई
………………द्वारा गणना की जाोंच की गई …………को
अवधकतम वीकीकायय कायय दबाि …………………
मुख्य वनरीिक की वटप्पणी और हस्तािर ………………… ………………वकग्रा/सेमी 2 (जी)
वनरीिक के नोट स582 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि XIX:आर01 वदनाोंक: xx.xx.2026
प्रपत्र XIX
(विवनयम 387)
एक इकोनोमाइज़र के उपयोग के वलए प्रमाण पत्र
इकोनोमाइजर की पोंजीकरण सोंख्या प्रकार
ट्यूबो ोंकी सोंख्या
हैडरो ोंकी सोंख्या
इकोनोमाइजर रेवटोंग वनमायण का स्थान और ि य
मावलक का नाम
इकोनोमाइजर की क्तस्थवत
मरम्मत
वटप्पवणयाों
__________ को _वकग्रा/सेमी 2 (जी ) पर हाइडरॉवलक रूप से परीिण वकया गया
मैं यह प्रमावणत करता हूाँ वक उपरोि इकोनोमाइजर को मेरे/ मुख्य वनरीिक द्वारा बॉयलर
अवधवनयम 2025 की धारा 12/13 के प्रािधानो ों के तहत अवधकतम दबाि ............... वकग्रा /
सेमी 2 (जी) /____ °F के अवधकतम तापमान पर …………… से …………… तक की अिवध में काम करने
की अनुमवत दी जाती है।
सेफ्टी ररलीफ िॉल्व की इस लोवडोंग को …………… वकग्रा/सेमी 2 (जी ) से अवधक नही ोंहोनी
चावहए ।
…………… रु. शुल्क का भुगतान ________ को वकया
स्थान
वदनाोंक ________ 20.. के वदन ……………
सिम व्यक्ति का नाम और हस्तािर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 583
शतेँ
(प्रपि XIX के पीछे की ओर)
(1) मुख्य वनरीिक की वलक्तखत अनुमवत के वबना इकोनोमाइजर में कोई सोंरचनात्मक पररितयन, पररिधयन
या निीनीकरण नही ोंवकया जाएगा।
(2) यह प्रमाणपि लागू नही ोंरहेगा-
(क) उस अिवध की समाक्तप्त पर वजसके वलए इसे प्रदान वकया गया था, या
(ख) जब इकोनोमाइजर के साथ कोई दुघयटना होती है, या
(ग) जब इकोनोमाइजर में या उसके वलए कोई सोंरचनात्मक पररितयन, जोड़ या निीनीकरण वकया
जाता है, या
(घ) जब अवधवनयम की धारा 17 में वदए गए प्रािधान के अनुसार, इकोनोमाइजर में या उसके वलए
कोई सोंरचनात्मक पररितयन, पररिधयन या निीनीकरण वकया जाता है; या
(ड़) मुख्य वनरीिक या वनरीिक के एक आदेश को इकोनोमाइजर के मावलक देने पर वक इसका
उपयोग इस आधार पर प्रवतबोंवधत है वक यह एक खतरनाक क्तस्थवत में है।
(3) एकोनोमाइसर का उपयोग प्रमाण पि में दजय ऐसे अवधकतम वीकीकायय काययशील दबाि /तापमान से
अवधक तापमान पर नही ोंवकया जाएगा जो रेलीफ िाल्व अवधकतम वीकीकायय काययशील दबाि /तापमान
सेट है।
(4) एकोनोमाइसर का उपयोग उस क्तस्थवत के अलािा अन्यथा नही ोंवकया जाएगा, वजसे मावलक उवचत रूप
से सुरवित कायय के साथ सोंगत मानता है।
नोट : इस इकोनोमाइजर के बारे में वििरण एक पोंजीकरण पुक्तस्तका सोंख्या …………… में दजय वकया गया
है, वजसकी एक प्रवत मुख्य वनरीिक को आिेदन करके भुगतान देकर प्राप्त की जा सकती है।584 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि XX:आर00 वदनाोंक: xx.xx.2026
प्रपत्र संख्या XX
योग्य बॉयलर िेल्डर का प्रमाणन वनरंतरता प्रपत्र
(भारतीय बॉयलर विवनयम के विवनयम 517 और 527 (3) के अनुसार, निीनीकरण अनुरोध के
साथ प्रिुत वकया जाना है)
भारतीय बॉयलर विवनयम, 2026
के तहत जारी
िेल्डर का नाम :
वपता का नाम :
जन्मवतवथ :
सोंगठन का नाम और पता :
आईबीआर योग्यता प्रमाणपि सोंख्या: िैधता:
वनपुणता : काबयन स्टील - प्लेट / पाइप और ट्यूब (एम नोंबर
ग्रुवपोंग)
वमश्र धातु स्टील - प्लेट / पाइप और ट्यूब (एम नोंबर
ग्रुवपोंग)
प्रवहृया:
उपभोज्य U सोंख्या:
वनरोंतरता वििरण (सोंदभय के वलए नमूना वििरण के माध्यम से) :
क 6 महीने पूरे होने पर
क िेल्ड वकए गए पुजे का नाम:
ख तारीख:
ख 12 महीने पूरे होने पर
क िेल्ड वकए गए जोड़ का नाम:
ख तारीख:
ग 18 महीने पूरे होने पर
क िेल्ड वकए गए पुजे का नाम:
ख तारीख:
घ 24 महीने पूरे होने पर
क िेल्ड वकए गए पुजे का नाम:
ख तारीख:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 585
जमाकताय
वनयोिा के हस्तािर और मुहर , तारीख के साथ
प्रमाणपि ______________ तक बााया गया
अनुमोदनकताय
(सिम प्रावधकारी का नाम और हस्तािर)
तारीख और मुहर586 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रपि XXI:आर01 वदनाोंक: xx.xx2026
प्रपत्र XXI
(विवनयम 540)
िेल्डर की योग्यता / पुनः योग्यता परीिण का अवभलेख (भारतीय बॉयलर विवनयम, 2026 )
परीिण का स्थान ………………
वदनाोंक ………………………
िेल्डर का नाम ……………………………………………………………………………………………
वपता का नाम ………………………………………………………………………………………………………
जन्मवतवथ ………………………………………………………………………………………………………
पता ……………………………………………………………………………………………………………
…………………………………………………………………………………………………………………
गैस/इलेक्तररक आकय पर सेिा का अनुभि ………………………ि य ………………………………
िेल्डर के हस्तािर ………………………………………………………………………………………
उन फमों के नाम और पते जहाों प्रवशवित हुए ……………………………………………………………
…………………………………………………………………………………………………………………
(प्लेट, पाइप, ट्यूब)………………………………………………………………………………… पर परीिण वकया गया
इलेक्तररक गैस की एसी/डीसी …………………………………………………………………………………
परीिण का प्रकार ……………………………………………………………………… (ग्रूि/ पवट्टका / शाखा)
क्तस्थवत……………………………………………………………………………………………………… ……
प्रयुि सामग्री की मोटाई ……………………………………………………………………………
उपयोग वकए गए पाइप, शाखा या ट्यूबो ोंका व्यास और मोटाई ………………………………………… ……
मुख्य सामग्री और इलेररोड या वफलर रॉड की गुणित्ता ……………………………………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 587
वनगरानी के पररणाम
अोंक
अवधकतम प्राप्ताोंक
प्रवहृया
1. नमूना तैयार करना 3
2. इलेररोड या वफलर रॉड का आकार और 2
ग्रेड
3. चक्करो ोंकी सोंख्या और वनयोंिण में बदलाि 5
ख दृश्य वनरीिण
4. जड़ प्रिेश 10
5. अोंडरकट से मुक्ति 5
6. रय स का वडसपोवजशन 2
7. सतह की एकरूपता 1
8. प्रोफ़ाइल का आकार 1
9. जोड़ो ोंका वचकनापन 2
10. गुहाओ ोंऔर लैग से मुक्ति 5
11. िेल्ड जमा के आयाम 1
12. िेल्ड धातु की गुणित्ता (ओिरहीवटोंग, सतह की दरारें, स्पोंजी सतह आवद) 3
ग. भौवतक परीिण
13. फे स बेंड परीिण 10
14. रूट बेंड परीिण 20
घ खुदाई परीिण
15. रय स का वडसपोवजशन 2
16. सोंलयन की गहनता 5
17. रूट पेनेटरेशन 1 1
18. लैग समािेशन और सरोंध्रता 5
ङ. खंवडत सतह
19. िेल्ड धातु की गुणित्ता (अत्यवधक ऑक्सीकरण, काबयराइजेशन, 7588 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अवतताप,खुरदरापन, सरोंध्रता, उपक्तस्थवत)।
100
सिम प्रावधकारी का नाम और हस्तािर
रेवडयोग्रावफक परीिण का अिलोकन (यवद वकया गया है) …………………………………………
वदए गए अोंक ……………………………………………………………………………… %
मौक्तखक या वलक्तखत परीिा का पररणाम ……………………………………………… ……
वदए गए अोंक ……………………………………………………………………………… %
सिम प्रावधकारी की सामान्य वटप्पणी ………………………………………
पाि िैक्तल्डोंग का प्रकार तथा श्रेणी--------------------- गैस या इलेक्तररक आकय िेक्तल्डोंग।
प्रमाण पि की िैधता की अिवध ……………………………… से …………… तक
स्थान ……………
वदनाोंक ……… …… सिम प्रावधकारी का नाम और हस्तािर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 589
प्रपि XXII:आर01 वदनाोंक: xx.xx 2026
प्रपत्र XXII
छोटे औद्योवगक बॉयलरो ंके वलए विवनमाषण और परीिण प्रमाण पत्र
(विवनयम 555(2))
1. वनमायता का नाम ……………………… वनमायण का ि य ………………………………… ……
2. ………………………………………………………………………………… के वलए वनवमयत।
3. स्थापना का स्थान …………………………………………………………………… ……
4. बॉयलर की पहचान …………………………… सिम व्यक्ति की मुहर …………………………
5. आरेखण सोंख्या …………………………………… पररितयन सोंख्या ……………………………………
6. वडजाइन दबाि (वकलो / सेमी 2 (जी)) …………………………
7. बॉयलर का आकार
लोंबाई (मीटर) चौड़ाई (मीटर) ऊोंचाई (मीटर) व्यास (मीटर)
8. सामग्री विवशष्ट सता (जैसा लागू हो)
रासायवनक सोंरचना याोंविक विशे ताएों
C. Si. Mn. P S Y S U.T.S % EL
सीप ………………………………………………………………………………………………………………
फनेस ……………………………………………………………………………………………
ट्यूब प्लेटटस ………………………………………………………………………………………………………
फ्लेंज ……………………………………………………………………………………………………………
बॉयलर ट्यूब/पाइप/पैड वििरण ………………………………………………………………………
व्यास मोटाई सामग्री विवशष्ट सता रासायवनक सोंरचना याोंविक विशे ताएों
C. Si. Mn. P S Y S U.T.S % EL
ट्यूब ……………………………………………………………………………………………………………
पाइप …………………………………………………………………………………………………
पैड ………………………………………………………………………………………………………
9. आयतन िमता590 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
10. ताप सतह (िगय मीटर)
11. नोजल कनेक्शन
(क) स्टीम आउटलेट ……………………………………………………………
(सोंख्या आकार और नोजलो ोंका प्रकार)
(ख) सुरिा िाल्व ……………………………………………………………………… ……
(सोंख्या आकार और नोजलो ोंका प्रकार)
(ग) सहायक (एयर िेंट) …………………………………………………………
((सोंख्या आकार और नोजलो ोंका प्रकार)
(घ) ब्लोऑफ िाल्व ……………………………………………………………………………
(सोंख्या आकार और नोजलो ोंका प्रकार)
(इ) फ़ीड िाल्व ……………………………………………………………
(सोंख्या आकार और नोजलो ोंका प्रकार)
12. शॉप हाइडरो परीिण दबाि (वकलो सेमी 2) ……………………… वतवथ …………………………………
वनमायता का नाम और हस्तािर
हम यह प्रमावणत करते हैं वक उपरोि बॉयलर का वनमायण हमारी देखरेख में वकया गया और भारतीय
बॉयलर विवनयम, 2026 के अनुसार सिम व्यक्ति द्वारा वनमायण के विवभन्न चरणो ों में वनरीिण वकया गया
तथा इसकी वनमायण और कारीगरी को क्तस्थवत सोंतो जनक पाया गया।
सिम व्यक्ति का नाम और हस्तािर वनरीिण प्रावधकारी का नाम और हस्तािर
वदनाोंक ………… .. का ……………………… वदन[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 591
प्रपि XXIII:आर00 वदनाोंक: xx.xx.2026
प्रपत्र XXIII
छोटे सौर बॉयलरो ंके वलए विवनमाषण और परीिण प्रमाण पत्र
[विवनयम 596(3)]
1. वनमायता का नाम ……………………… वनमायण का ि य ………………………………… ……
2. ………………………………………………………………………………… के वलए विवनवमयत।
3. स्थापना का स्थान …………………………………………………………………… ……
4. बॉयलर की पहचान …………………………… सिम व्यक्ति की मुहर …………………………
5. आरेखण सोंख्या …………………………………… पररितयन सोंख्या ……………………………………
6. वडजाइन दबाि (वकलो/सेमी 2 (जी)) …………………………
7. ताप सतह (िगय मीटर) ………………………
8. सामग्री विवशष्ट सता (जैसा लागू हो)
9. आयतन िमता (लीटर में) …………… ……
10. सुरिा िाल्व (सोंख्या ……………… आकार …………………)
11. हाइडरो परीिण दबाि (वकग्रा/सेमी 2 (जी)) ……………………… वदनाोंक …………………………
विवनमायता
(नाम, हस्तािर और मुहर)
हम यह प्रमावणत करते हैं वक उपरोि बॉयलर का वनमायण हमारी देखरेख में वकया गया और भारतीय
बॉयलर विवनयम, 2026 के अध्याय -17 में वनवदयष्ट स वनमायण के विवभन्न चरणो ोंमें सिम व्यक्ति द्वारा वनरीिण
वकया गया और वनमायण, कारीगरी के अनुसार सोंतो जनक थी।
सिम व् यक्त् त वनरीिण प्रावधकारी
(नाम, हस्तािर और मुहर) (नाम, हस्तािर और मुहर)
वदनाोंक ……………… .. का वदन592 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पररवशष्ट-क
विवनमाषण के दौरान बॉयलसष, बॉयलर घटको ंऔर अ् य पुजों का वनरीिण और जांच
सामा् य
वनरीिण प्रावधकारी/ सिम व् यक्ति को सारे उवचत समय में विवनमायण के स् थल तक पहुोंच प्राप्त होगी तथा
कम-से-कम वनम् नवलक्तखत चरणो ों में बॉयलर के विवनमायण का वनरीिण करेगा और भारतीय बॉयलर
विवनयम, 2026 की आिश् यकताओ ों का अनुपालन न करने िाले वकसी भी पुजे को अस् िीकार कर सकता
है। वकसी सोंदेह की क्तस्थवत में, वनरीिण प्रावधकारी/सिम व् यक्ति नीचे वनधायररत चरणो ों के अलािा वकसी भी
चरण में जाोंच कर सकता है। विवनमायता को प्रत्य ेक चरण पर पहुोंचने से कम-से-कम 4 काययवदिस पहले
वनरीिण प्रावधकारी/सिम व् यक्ति को सूवचत करना होगा। वकसी भी चरण का वनरीिण करने से पहले
वनरीिण प्रावधकारी/सिम व् यक्ति इस बात से सोंतुष् ट होना होगा वक सभी जाोंच उपकरण/साधन सही तरीके
से अोंशाोंवकत वकए गए हैं।
वनरीिण के चरण
वनरीिण प्रावधकारी द्वारा नावमत सिम व् यक्ति प्रत्य ेक बॉयलर का विवनमायण के दौरान वनरीिण करेगा। यह
सुवनवश्चत करने के वलए पयायप् त वनरीिण वकए जाएोंगे वक सामग्री, विवनमायण और जाोंच इन विवनयमो ों की
आिश् यकताओ ोंके अनुरूप हो।
विवनमाषण के दौरान वनरीिण के चरण
क. शेल टाइप बॉयलर
(क) (i) जब बॉयलर वनमायता के कारखाने पर सोंगत सामग्री जाोंच प्रमाण-पि के साथ पहचान के वलए
सामग्री तैयार हो;
(ii) प् लेटटस के अवभविय यास और कवटोंग में, बॉयलर के पुजे पूरे होने के बाद, प् लेट पहचान वच् इस प्रकार
लगाया जाएगा जो स् पष् ट रूप से वदखाई दे। यवद प् लेट का पहचान वच् अपररहायय रूप से कट कर अलग
हो गया है तो वनरीिण प्रावधकारी/ सिम व् यक्ति की सोंतुवष्ट स के वलए विवनमायता द्वारा उसे घटक के वकसी
अय य भाग पर स् थानाोंतररत वकया जाएगा;
(iii) यवद उत् पादन िेल्ड जाोंच अपेवित है तो वनरीिण प्रावधकारी/ सिम व् यक्ति िेल् ड टेस् ट प् लेट सामग्री की
पहचान करेगा;
(ख) जब शेल प् लेट और एोंड प् लेटटस को िेक्तल्डोंग के वलए तैयार प् लेट को कोनो ोंके साथ बनाया जाए तथा टेस् ट
प् लेटटस जोड़ी जाएों;
(ग) जब मुख् य बेलनाकार शेल की िेक्तल्डोंग पूरी हो गई हो तथा इसकी गोलाई की जाोंच कर ली गई हो;
(घ) रेवडयोग्राफ और/अथिा गैर-विनाशकारी परीिण की ररपोटों की जाोंच करने के वलए;[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 593
(ड.) जब बॉयलर के खुले हुए वहस् से को तैयार वकया गया हो तथा स् टैंड पाइप् स और एोंड पाइप् स सवहत
समान कने् शन को उवचत स् थान पर िेल् ड वकया गया है तथा बाद में पूरा होने के बाद;
(च) जब डरम अथिा शेल की िेक्तल्डोंग पूरी हो गई हो तथा जब इन विवनयमो ोंके तहत ताप प्रवहृया अपेवित
हो, तब ताप प्रवहृया के ररकॉडय की जाोंच के वलए;
(छ) जब िेल् ड जाोंच के नमूने जाोंच प् लेट से तैयार वकए गए हैं वजय हें अपेवित परीिण के साक्ष् य के वलए पहले
चुना गया है;
(ज) हाइडरॉवलक परीिण के दौरान, वजसके बाद बाहरी और आोंतररक जाोंच तथा स् टेंवपोंग की जाती है।
ख. िॉटर ट्यूब बॉयलसष
(I) िेल्पल्डड डरम् स, हेडसष, सेपरेटसष और िेसेल् स
(क) (i) जब बॉयलर वनमायता के कारखाने पर सोंगत सामग्री जाोंच प्रमाण-पि के साथ पहचान के वलए
सामग्री तैयार हो;
(ii) प् लेटटस के अवभविय यास और कवटोंग में, बॉयलर के पुजे पूरे होने के बाद, प् लेट पहचान वच् इस प्रकार
लगाया जाएगा जो स् पष् ट रूप से वदखाई दे। यवद प् लेट का पहचान वच् अपररहायय रूप से कट कर अलग
हो गया है तो वनरीिण प्रावधकारी/ सिम व् यक्ति की सोंतुवष्ट स के वलए विवनमायता द्वारा उसे घटक के वकसी
अय य भाग पर स् थानाोंतररत वकया जाएगा;
(iii) यवद उत् पादन िेल्ड जाोंच अपेवित है तो वनरीिण प्रावधकारी/ सिम व् यक्ति िेल् ड जाोंच प् लेट सामग्री की
पहचान करेगा;
(ख) जब कोनो ोंके साथ बेलनाकार प् लेटटस को िेक्तल्डोंग के वलए बनाया जाए और टेस् ट प् लेटटस की िेक्तल्डोंग
और अटैचमेंट की शुरुआत के वलए तैयार रूप में स् थावपत वकया जाए;
(ग) जब मुख् य बेलनाकार शेल की िेक्तल्डोंग पूरी हो जाए, शेल की गोलाई की जाोंच हो जाए और
रेवडयोग्रावफक अथिा अल् टरासोवनक जाोंच ररपोटें, ररकॉडय जाोंच हेतु उपलब् ध हो;ों
(घ) जब ऐडों प् लेटटस वमल प्रमाण-पि के साथ पहचान हेतु तैयार हो,ों तैयार िेल् ड कोनो ों के साथ आकार में
तैयार वकए गए हो ोंतथा पररवधक िेक्तल्डोंग प्रचालन के वलए तैयार बेलनाकार शेल स् थावपत वकए गए हो;ों
(ड.) जब डरम अथिा हेडर में ऐडों प् लेट की िेक्तल्डोंग पूरी हो गई हो और रेवडयोग्राफ अथिा अल् टरासोवनक
परीिण ररपोटें जाोंच हेतु उपलब् ध हो;ों
(च) जब प्रत्य ेक डरम अथिा हेडर को कम् पोंसेशन प् लेटटस और अटैचमेंटटस प्राप् त करने के वलए तैयार वकया
गया हो, तथा जब प्रत्य ेक प्रकार की ट्यूब स् टब की िाोंच के कम-से-कम 10 प्रवतशत को िेक्तल्डोंग के वलए
तैयार वकया गया हो;
(छ) जब प्रत्य ेक डरम अथिा हेडर में सारी िेक्तल्डोंग पूरी हो जाए, तो वनरीिण प्रावधकारी/ सिम व् यक्ति ताप
प्रवहृया के ररकॉडों की जाोंच करेगा, तथा टेस् ट प् लेटटस तैयार करने तथा जाोंच के वलए नमूनो ों को वचव्त
करेगा;594 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ज) गैर-विनाशकारी जाोंच के दौरान, दबाि कम होने के बाद, वमवश्रत इस् पात डरम और काबयन इस् पात डरम
पर, वजसमें काबयन की मािा 0.25 प्रवतशत से अवधक अथिा मोटाई 100 वममी. से अवधक हो;
(i) हाइडरॉवलक जाोंच के दौरान वजसके बाद अोंवतम जाोंच और स् टैंवपोंग होगी।
(II) सीमलेस डरम् स, हेडसष, सेपरेटसष और िेसेल्स
(क) सोंगत सामग्री जाोंच प्रमाण-पि के साथ पहचान के वलए सामग्री तैयार हो, साथ ही जब प्रत्य ेक वसलेंडर
को तैयार वकए जाने, अथिा पृथकट ऐडों ् लोजर की िेक्तल्डोंग तथा टेस् ट प् लेट सामग्री की पहचान करने हेतु
बनाया जाता है;
(ख) जब ऐडों प् लेटटस वमल प्रमाण-पि के साथ पहचान हेतु तैयार हो,ों तैयार िेल् ड कोनो ों के साथ आकार में
तैयार वकए गए हो ोंतथा पररधीय िेक्तल्डोंग प्रचालन के वलए तैयार बेलनाकार शेल स् थावपत वकए गए हो;ों
(ग) जब डरम अथिा हेडर में ऐडों प् लेट की िेक्तल्डोंग पूरी हो गई हो और रेवडयोग्राफ अथिा अल् टरासोवनक
परीिण ररपोटें जाोंच हेतु उपलब् ध हो;ों
(घ) जब प्रत्य ेक डरम अथिा हेडर को कम् पोंसेशन प् लेटटस और अटैचमेंटटस प्राप्त करने के वलए तैयार वकया
गया हो, तथा जब प्रत्य ेक प्रकार की ट्यूब स् टब की िाोंच के कम-से-कम 10 प्रवतशत को िेक्तल्डोंग के वलए
तैयार वकया गया हो;
(ड.) जब प्रत् येक डरम अथिा हेडर में सारी िेक्तल्डोंग पूरी हो जाए, तो वनरीिण प्रावधकारी ताप प्रवहृया के
ररकॉडों की जाोंच करेगा, तथा टेस् ट प् लेटटस तैयार करने तथा जाोंच के वलए नमूनो ोंको वचव्त करेगा;
(च) गैर-विध् िोंसक जाोंच के दौरान, दबाि कम होने के बाद, वमवश्रत इस् पात डरम और काबयन इस् पात डरम पर,
वजसमें काबयन की मािा 0.25 प्रवतशत से अवधक अथिा मोटाई 100 वममी. से अवधक हो;
(छ) हाइडरॉवलक जाोंच के दौरान वजसके बाद अोंवतम जाोंच और स् टैंवपोंग होगी।
ग. ट्यूबलर और पाइवपंग घटक
(क) जब बॉयलर वनमायता के कारखाने पर सोंगत सामग्री जाोंच प्रमाण-पि के साथ पहचान के वलए ट्यूब् स
अथिा पाइप् स तैयार हो;ों
(ख) जब ट्यूब् स अथिा पाइप् स और उनसे जुड़ी हुई िस्त ुओ ों की सारी िेक्तल्डोंग पूरी हो चुकी हो तथा गैर-
विनाशकारी परीिण और दबाि कम करने सोंबोंधी ररपोटय/ररकॉडय जाोंच हेतु उपलब् ध हो;ों
(ग) हाइडरॉवलक जाोंच के दौरान वजसके बाद अोंवतम जाोंच और स् टैंवपोंग होगी।
घ. प्रावधकारी/सिम व्यल्पि द्वारा टील वनमाषताओ ंके कारखानो ं/फोवजिंग इकाईयो ंऔर ट्यूब तथा
पाइप वनमाषताओ ंके कारखाने में वकए जाने िाले वनरीिण और परीिण:
(I) टील वनमाषता कारखाने[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 595
(क) बॉयलर के वनमायण में उपयोग वकए जाने िाले वबलेट, वसक्तियाों, लैब, ब्लूम, प्लेट, बार, कॉनकास्ट
बार या वकसी अन्य सामग्री के वनमायण के वलए:
(i) वनयमानुसार स्टील के रसायन की जााँच;
(ii) जब ऊष्मा उपचार के बाद गैर-विनाशकारी परीिा और याोंविक परीिण नमूने के चयन के वलए तैयार
हो;
(iii) परीिण, अोंवतम परीिा और मुद्राोंकन।
नोट: उपयुयि के बािजूद भी जहााँ स्टील, सेंटरल बॉयलसय बोडय द्वारा भारतीय बॉयलर विवनयमो ों के तहत
मान्यता प्राप्त प्रवसद् स्टील वनमायताओ ों द्वारा बनाया गया हो तो ये परीिण स्टील वनमायताओ ों द्वारा वीकयों वकया
जाएगा और प्रमावणत वकया जाएगा तथा ररकॉडय बनाए रखा जाएगा।
(II) पाइप और ट्यूब वनमाषता
(i) प्रासोंवगक सामग्री परीिण प्रमाण पि के साथ सामग्री की पहचान;
(ii) जब हीट टरीटमेंट के बाद गैर-विनाशकारी परीिा और याोंविक परीिण नमूनो ों के चयन के वलए तैयार
हो;
(iii) जब नमूने का परीिण वकया जाता है और हाइडरोवलक परीिण के वलए पाइप/ट्यूब तैयार होते हैं।
(iv) अोंवतम वनरीिण और मुद्राोंकन
नोट: उपयुयि के बािजूद भी, जब पाइपो/ों ट्यूबो ों का वनमायण के न्द्रीय बॉयलर बोडय द्वारा भारतीय बॉयलर
विवनयमो ों के तहत मान्यता प्राप्त प्रवसद् पाइप/ट्यूब वनमायताओ ों द्वारा वकया गया हो, तो वनरीिण के सभी
उपरोि चरणो ों को पाइप और ट्यूब वनमायताओ ों द्वारा वीकयों वकया जाएगा और प्रमावणत वकया जाएगा तथा
ररकॉडय बनाए रखा जाएगा।
(III) फोवजिंग इकाईयाँ:
(i) वनयमानुसार स्टील के रसायन की जााँच;
(ii) जब हीट टरीटमेंट के बाद गैर-विनाशकारी परीिा और याोंविक परीिण नमूने के चयन के वलए
तैयार हो;
(iii) परीिण, अोंवतम परीिा और मुद्राोंकन।
नोट: उपयुयि के बािजूद भी, जब फोवजिंग का वनमायण कें द्रीय बॉयलर बोडय द्वारा भारतीय बॉयलर
विवनयमो ों के तहत मान्यता प्राप्त प्रवसद् फोवजिंग इकाइयो ों द्वारा वकया गया हो, तो फ़ोजय द्वारा वीकयों परीिण
वकए जाएोंगे और प्रमावणत वकया जाएगा तथा सभी ररकॉडय ठीक से बनाए रखे जायेंगे।
(IV) फाउंडरी इकाइयाँ:596 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(i) वपघली हुई धातु के रसायन की जााँच;
(ii) ऊष्मा सोंख्या का सत्यापन और परीिण बार का मुद्राोंकन;
(iii) गैर-विनाशकारी परीिा ररपोटय और ऊष्मा उपचार ररपोटय/ररकॉडय, याोंविक परीिण, अोंवतम
परीिा और मुद्राोंकन का सत्यापन।
नोट: उपयुयि के बािजूद भी, जब काक्तस्टोंग कें द्रीय बॉयलर बोडय द्वारा भारतीय बॉयलर विवनयमो ों के तहत
मान्यता प्राप्त प्रवसद् फाउोंडरी इकाइयो ोंद्वारा की की गई हो तो फाउोंडरी द्वारा वीकयों परीिण वकए जाएोंगे और
प्रमावणत वकया जाएगा तथा सभी ररकॉडय ठीक से बनाए रखे जायेंगे।
ङ. िाल्व और माउंवटंग
(क) प्रासोंवगक सामग्री परीिण प्रमाण पि के साथ सामग्री की पहचान;
(ख) हाइडरोवलक परीिण और मुद्राोंकन।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 597
पररवशष्ट ख
टरांसिसष रप्चर टरैस (रप्चर के मॉड्यूलस)
कास्ट आयरन की टराोंसिसय बल को टराोंसिसय रप्चर स्टरैस के रूप मे दशायए गए आोंकड़े के माध्यम से व्यि
वकया जा सकता है ; ये आोंकड़ा को सेक्शन के मॉड्यूलस में विफल होने पर अवधकतम मोड़ लाने पर उसे
विभावजत करके प्राप्त वकए जा सकता है। अतएि, टराोंसिसय रप्चर स्टरैस पर अवधकतम दबाि तब माना
जाएगा जब इसे मोड़ लाने की सामान्य वसद्ान्त में वकए गए पूिायनुमान के अनुसार सामग्री पर दबाि डाला
जाए और इस हृम में सेक्शन का आकार और आकृ वत अलग होगी। तथावप, टराोंसिसय के दौरान टूटी हुई
छड़ पर इसकी इलाक्तस्टक सीमा से अवधक स्टरैस वदया जाए और इन पररक्तस्थवतयो ोंके अोंतगयत मोड़ लाने के
वसद्ाोंत को उपयुि नही ों माना जा सकता है। इसके अवतररि, कास्ट मेटल में कू वलोंग की दर का ऐसा
प्रभाि होना चावहए वजससे वक मोटी छड़ का टराोंसिसय रप्चर स्टरैस उसी मेटल से बनी पतली छड़ से कम
होता है। इसवलए टराोंसिसय रप्चर पूरी तरह से स्टरैस खोंड के आकार और मेटल पर वनभयर नही ों करता है,
बक्तल्क उवचत तरीके से बार के आयाम सोंबोंधी पूरा ब्योरा वदए वबना ही टराोंसिसय परीिण के पररणामवीकरूप
लाया जा सकता है। इसके वलए अपेवित सूि वनम्नानुसार प्राप्त वकया जाता है:
दोनो ोंवकनारो ोंपर लगे बार और वजन्हें बीच में लोड डबल्ू के साथ लोड वकया जाता है, बेंवडोंग मोमेंट WL/4
के अध्यधीन होगी जहाों L दोनो ोंवकनारो ोंके बीच की दूरी होगी। छड़ द्वारा लगाए गए प्रवतरोध को fZ के रूप
में व्यि वकया जा सकता है जहाों f स्टरैस और Z खोंड का मॉड्यूलस होगा। फ्रे क्चर िाले स्थान पर f टराोंसिसय
रप्चर स्टरैस का िेवकों ग स्टरैस बन जाता है और WL/4 = fZ होता है, जहाों f=LW/LZ (4Z) है। यवद W टन में
है और L इोंच में है तब िहााँ f टन प्रवत िगय इोंच में है। गोल छड़ के वलए Z=0.098d2 है , जहाों d व्यास इोंचो ों
में है।
एक मानक गोलाकार छड़ के वलए L और Z का मान क्तस्थर होता है , जहाों WL/4Z का मान वनवश्चत होता है
और इसवलए टराोंसिसय रप्चर स्टरैस f=KW, जहाों K का मान क्तस्थर होता है।
िास्तविक िेवकों ग लोड को टराोंसिसय रप्चर स्टरैस में बदलने हेतु कारक विवनयमन 65 की सीमाओ ों के भीतर
मानक परीिण छड़ो ों और परीिण छड़ो ों में होने िाले बदलाि को वनम्नवलक्तखत तावलका में वदया गया है।
उसी तावलका में मानक व्यास की छड़ो ों पर िास्तविक िेवकों ग लोड को समान िेवकों ग लोड में पररिवतयत
करने के वलए कारक वदए गए हैं।
मानक व्य ास की छडो ंपर िात विक ब्े वकं ग लोड स को समतुल् य ब्ेवकं ग लोड स में बदलने के वलए
फै ट र एस
(मानक व् यास के छड़ पर समतुल् य िेवकों ग लोड = X x िास्त विक िेवकों ग लोड)
और
िात विक ब्ेवकं ग लोड स को वतयषक विभंजक तनाि में बदलने के वलए फै ट र K598 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(प्रवत िगय इोंच में वतययक विभोंजक तनाि टन में = ख x िास्त विक िेवकों ग लोड पाउोंड में)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 599
पररवशष्ट ग
(विवनयम 75 देखें)
(1) परीिण प् लेट के वलए मूल धातु: परीिण टुकड़ेऔरपरीिण नमूने तैयार करने में प्रयु् त मूल
धातु सोंगत एडबल् यूएस अथिा एसएफए विवशष् टता के अनुसार माइल्ड स् टील/ नॉन फे रस सामग्री के समान
होगी। ग्रूि फे स और बेवकों ग प् लेटटस पर 3 वममी य यूनतम मोटाई सवहत बटररोंग के साथ समान सामग्री का
उपयोग वकया जाएगा। मोटाई और अय य पररमाप सोंगत एडबल् यूएस अथिा एसएफए विवशष् टता के
अनुरूप होगों े।
(2) ऑल-िेल् ड धातु परीिण: परीिण टुकड़ो ों को तैयार करने की पद्वत। िेल् ड मेटल के पहली बार
के जमाि के तत्क ाल पहले मूल धातु का तापमान य यूनतम 10°-38°C के बीच होगा। प्रीहीट और इोंटरपास
तापमानसोंगत एडबल् यूएस अथिा एसएफए विवशष् टता के अनुरूप होगा। परीिण नमूना अपेवित
एडबल् यूएस अथिा एसएफए विवशष् टता के अलािा वकसी याोंविक अथिा तापीय प्रवहृया के अधीन नही ों
होगा ऑल-िेल् ड परीिण टूकड़ो ोंको लागू एडबल् यूएस अथिा एसएफए विवशष्ट ता के अनुसार तैयार वकया
जाएगा।
वचत्र 2/2: ऑल-िेल्ड मेटल परीिण नमूनो ंको तैयार करने की प्वत600 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
असेम् बली को इन प् लेटटस वप्र-सेट के साथ िेल् ड वकया जाएगा तावक प् लेटटस के कै म् फडय वसरो ों के
ऊपरी वहस् से के बीच का अोंतर 25 वममी हो और जब बट िेल् ड का काम पूरा कर वलया गया हो तो प् लेटटस
लगभग एक स् तर पर हो।ों
िेल् ड मेटल को वसोंगल अथिा मल् टी रन लेयर में जमा वकया जाएगा और प्रत्य ेक लेयर के जमा
करने की वदशा बारी बारी से नमूने के प्रत्य ेक वसरे की ओर होगी। िेल् ड मेटल का प्रत्य ेक रन मोटाई 1.5
वममी से कम नही ोंहोगी और 3 वममी से अवधक नही ोंहोगी। एक रन को पूरा करने और उसके बाद के रन
में जमा करना शुरू करने के बीच समय का अोंतराल 5 वमनट से कम नही ोंहोगा। असेंबली को रनो ोंमें जमा
करने की प्रवहृया के बीच ठोंडा नही ोंवकया जाएगा। उपयोग वकये जाने िाला िेक्तल् डोंग करोंट विवनमायता द्वारा
बताई गई उपयु् त रेंज के भीतर होगा। असेंबली के वलए िेक्तल् डोंग की क्तस् थवत फ्लैट होगी जब तक वक
इलै् टरोड के वलए अनुवशवसत क्तस् थवत के विपरीत न हो, और ऐसे मामले में िेल् ड की क्तस् थवत विवनमायता द्वारा
की गई अनुसशोंसा के अनुसार होगी।
िेल् ड पूरा होने के पश् चात नमूने को िायु रवहत िेि में ठोंडा होने वदया जाएगा। वचि. 2/2 में दशायए
स्थ ानो ोंसे अवतरर् त प् लेटटस से िेल् ड सवहत इसके वहस्से को को काट कर अलग वकया जाएगा।
सभी िेल्ड टेस्ट पीस को एक समान तापमान तक बााकर हीट-टरीट वकया जाएगा और इलेररोड
के सोंबोंवधत एडब्ल्यूएस या एसएफए विवनदेश के अनुसार उस तापमान पर बनाए रखा जाएगा। परीिण
प्लेट को 300 °C से आगे भट्टी के बाहर धीरे-धीरे ठोंडा होने वदया जाएगा इसके अलािा डरॉट और वचवलोंग
से सोंरवित वकया जाएगा। हीवटोंग और कू वलोंग की दर सोंबोंवधत एडब्ल्यूएस या एसएफए विवशष्ट सता के
अनुसार होगी। एक तन्यता परीिण नमूने को इस बात का ध्यान रखते हुए वक नमूने की अनुदैध्यय धुरी िेल्ड
की कें द्र रेखा और प्लेट की मध्य-मोटाई के साथ मेल खाती हो परीिण टुकड़े से वचि 2/3 में दशायए गए
आयाम तक मशीन वकया जाएगा। तब नमूने का तन्यता बल के वलए परीिण वकया जाएगा।
वचत्र 2/3: तन्यता परीिण नमूना
(3) प्रभाि परीिण नमूना[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 601
चापी परीिण नमूने को सोंगत एडबल् यूएस अथिा एसएफए विवशष् टता में वदये पररमाप के
अनुरूप िेल् ड मेटल परीिण टुकड़ो ों से मशीन वकया जाएगा। ऑल-िेल् ड टेस् ट असेंबली से परीिण के
वलए परीिण नमूने वलये जायेंगे।
वचत्र 2/4:प्रभाि परीिण नमूना
(4) टरांसिसष तन्यता और बेंड परीिण
टराोंसिसय तय यता और बेंड परीिण टुकड़ो ोंको 12 वममी की उवचत लोंबाई और कम से कम 150
वममी चौड़ाई की दो प् लेटो ों को जोड़कर बट-िेक्तल् डोंग द्वारा वचि. 2/5में दशायये अनुसार तैयार वकया
जाएगा। प् लेट के वसरो ों को वसोंगल िी के आकार में जोड़कर तैयार वकया जाएगा वजसका वििरण
वनम् नानुसार होगा:
वचत्र 2/5: टरांसिसष तन्यता और बेंड परीिण नमूने तैयार करने की प्वत602 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 2/6: बैवकं ग रन के वडसपोजीशन के वलए वप्रपरेशन में ग्रूविंग
(वचि. 2/6देखें)
फ्यूजन फे सो ोंके बीच का कोण 60°-70°
आधार फे स 3.2 वममी
अवधकतम अोंतर 3.2 वममी
प् लेट के वसरो ों को वचि. 2/6के अनुसार तैयार वकया जाएगा और ऐसे प्री-सेट वकया जाएगा वजससे
उनमें िेक्तल् डोंग के पश् चात थोड़ा पररितयन करना सोंभि हो।
परीिण टुकड़े तैयार करने के दौरान िेक्तल् डोंग प्रवहृया नीचे दी गई तावलका 2/38 में वदए गए
वििरण के अनुसार िेक्तल् डोंग की क्तस् थवत के अनुरूप होगी:
तावलका II/38: टरांसिसष त् यता परीिण और बेंड परीिण टुकडेकी तैयारी के वलए िेल्पल् डंग प्रवहृया
परीिण टुकड़ो ोंके वलए िेक्तल्डोंग पोवजशन (सारे िेक्तल् डोंग प्रवहृया
कोण≠ 5°) जैसा वक नीचे तावलका 2/39 में
दशायया गया है
फ्लैट 1. सभी रन 4 वममी इलै् टरोडटस से बने होगों े।
िेल् ड स् लोप 0° 2. प्रथम रन – 5 वममी इलै् टरोडटस. इसके
िेल् ड रोटेशन 0° पश् चात सभी रन 6.3 वममी व्यास के इलैररोडटस
(अथिा सबसे बड़े विवनवमयत आकार के ) होगों े
झुके हुए प्रथम – 4 वममी इलैररोडटस.
िेल् ड स् लोप 30° इसके पश् चात के सभी रन – 4./5.0 वममी
िेल् ड रोटेशन 45° इलैररोडटस
िैवतज लोंबित प्रथम रन– 4 वममी इलैररोडटस
िेल् ड स् लोप 0° इसके पश् चात के सभी रन– 4/5 वममी[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 603
िेल् ड रोटेशन 90° इलैररोडटस
लोंबित
िेल् ड स् लोप 90° सभी रन 4 वममी इलैररोडटस से बने होगों े
ओिर हेड
िेल् ड स् लोप 0° सभी रन 4 वममी इलैररोडटस से बने होगों े
िेल् ड रोटेशन 180°
सभी मामलो ोंमें यवद आिश् यक पाया जाये तो वचि.2/6 में दशायये अनुसार, 3 वममी गहरे ग्रूि काटने
के पश् चात बैवकों ग रन परीिण टुकड़ेपर लागू िेक्तल् डोंग क्तस् थवत में 4 वममी इलैररोडटस से बने होगों े।
झुकी हुई और लोंबित क्तस्थवत के वलए परीिण टुकड़ो ों को ‘अपिडय’ पद्वत का उपयोग करते हुए
िेल् ड वकया जाएगा जब तक वक इलैररोडटस विवनमायता द्वारा विशे रूप से यह अनुशोंसा न की गई हो वक
‘डाउनिडय’ पद्वत का उपयोग वकया जाए, यवद दोनो ोंपद्वतयो ोंकी अनुशोंसा की जाती है तो परीिण टुकड़े
प्रत्य ेक पद्वत द्वारा िेल् ड टुकड़े से वलए जाएोंगे। िेक्तल् डोंग के पश् चात, परीिण टुकड़ो ों को िन फे स-बेंड और
िन रूट-बेंड परीिण नमूने तैयार करने के वलए मशीवनोंग पर शॉइोंग द्वारा काटा जाएगा जैसा वक वचि.
2/5में दशायया गया है।
(5) टरांसिसष त् यता परीिण
टराोंसिसय तय यता परीिण नमूने वचि. 2/7 में वदये पररमाप के अनुसार होगों े। िेल् ड के ऊपरी और वनचली
सतहो ों को प् लेटो ों के सोंबोंवधत मूल सतहो ों के स् तर पर फाइल, वघसा अथिा मशीन वकया जाएगा। जब
प् लेटें एक दूसरे के लेिल पर नही ों होती तो धातु को बराबर के लेिल पर लाने के वलए काटा जाएगा
बशते वक प् लेट की मोटाई में कु ल-वमलाकर 1 वममी से अवधक की कमी न हो।
परीिण नमूने का परीिण पररवशष्ट स ख में वदए गए तय यता परीिण के अनुसार वकया जाएगा।
(6) टरांसिसष बेंड परीिण
बेंड परीिण नमूनो ों की चौड़ाई 38 वममी होगी। िेल् ड के ऊपरी और वनचली सतहो ों को प् लेटो ों की
सोंबोंवधत मूल सतहो ोंके स् तर तक फाइल, वघसा अथिा मशीन वकया जाएगा, जो वक उपयुय् त मद (6) के
परोंतुक के अनुरूप होगा। टूल मा् सय से बचा जाना चावहए ् योवोंक यह उसे तनाि के स् थान तक ले
जायेगा और इससे प्रीमैच् यौर फे ल् योर हो सकता है। इस कारण से सतहो ों की मशीवनोंग की वदशा नमूनो ों
और िेल् ड के टराोंसिसय के अनुरूप होनी चावहए। परीिण नमूनो ों के नुकीले कोनो ों को गोलाकार वकया
जाना चावहए वजसकी विज् या 1.3 वममी से अवधक न हो।604 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
परीिण नमूनो ों को 180° के कोण के माध्यम से एक पूिय के ऊपर झुकाया जाएगा वजसका व्यास
नमूनो ों की मोटाई के तीन गुना के बराबर होगा, जैसा वक वचि 2/8 में दशायया गया है। एक परीिण
नमूने का परीिण िेल्ड के चेहरे के साथ तनाि में वकया जाएगा और एक तनाि में िेल्ड की जड़ के
साथ।
परीिण नमूनो ों को वचि. 2/8 में दशायए गए अनुसार फॉमयर वजसका व् यास नमूने की मोटाई का
तीन गुना होगा पर 180° के कोण पर मोड़ा जाएगा। एक परीिण नमूने का तनाि िाले िेल् ड फे स के
साथ और एक परीिण नमूने का तनाि िाले िेल् ड के रूट के साथ वकया जाएगा।
वचत्र. 2/8: बेंड परीिण करने की प्वत
वचत्र. 2/7: टरांसिसष तन्यता परीिण नमूने का
पररमाप
िेल्पल् डंग की शब् दािली की पररभार्ा, किडष इलैट रोड स का िगीकरण, पररभार्ाएं और वस्ांत-
पररभार्ाएं
िेल्ड ल ोप: िेल्ड का स्ल ोप िह कोण है जो िेल्ड रूट की रेखा और िेल्ड के सबसे वनचले वहस्स े
पर क्तस् थत िैवतज रेफरेंस प् लेन के बीच बनता है। (वचि. 2/9 देखें)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 605
वचत्र. 2/9: िेल् ड ल ोप को दशाषने िाला वचत्र
िेल् ड रोटेशन: िेल् ड का रोटेशन िेल् ड रूट की रेखा के माध् यम से गुजरने िाले लोंबित रेफरेंस
प् लेन के ऊपरी वहस् से और िेल् ड रूट की रेखा से खीचों ी गई एक रेखा के बीच बनने िाला कोण है जो िेल् ड
सतह के समकोण और िेल् ड के वकसी वसरे से समान दूरी पर क्तस् थत एक वबोंदु को जोड़ता है। (वचि. 2/10
देखें)
नोट: विवभन्न िेल्डो ोंके ढलान और रोटेशन का उदाहरण वचि 2/11 में वदया गया है। .
वचि 2/10 : िेल् ड रोटेशन को दशायने िाले वचि606 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचि. 2/11: ‘स् लोप’ और ‘रोटेशन’ के उदाहरण
वचि 2/12: फ्लैट (F)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 607
तावलका 2/39
िेक्तल् डोंग क्तस् थवतयाों : िेक्तल्डोंग क्तस् थवतयो ोंको वनम् नानुसार पररभाव त वकया गया है
क्तस् थवतयाों ल ोप रोटेशन वचह्न वचत्र
फ्लैट 10° से अवधक नही ों 10° से अवधक नही ों F वचि 2/12
झुकी हुई 10°से अवधक 45° तक 90° से अवधक नही ों I वचि 2/13
िैवतज लोंबित 10° से अवधक नही ों 10°से अवधक, 90° से H वचि 2/14
अवधक नही ों
लोंबित 45° से अवधक कोई भी V वचि 2/15
ओिरहेड 45° से अवधक नही ों 90° से अवधक O वचि 2/16
नोट: उपयुय् त पररभाव त पाोंच क्तस् थवतयाों स् लोप और रोटेशन के सभी सोंभि सोंयोजन को किर करते हैं
तावक प्रत्य ेक िेल् ड को इनमें से वकसी एक क्तस् थवत में िगीकृ त वकया जा सके ।
उपयुय् त तावलका वचि 2/12 के वलए है।
वचत्र 2/13: इन लाइंड (I)
वचत्र 2/14: हॉररजॉय टल िवटयकल (H)608 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
वचत्र 2/15: िवटयकल (V) वचत्र 2/16:ओिरहेड (U)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 609
पररवशष्ट घ
मानक तन्यता परीिण वहस्सो ंके रूप
मानक फ्लैट परीिण टुकडे
परीिण टुकड़ा क
1. शीटो,ों प्लेटो,ों स्टरीप्स, फ्लैट छड़ो,ों खोंडो ोंआवद के वलए चीफ
वचत्र 1
(i) (ii) (iii) (iv)
परीिण टुकड़े की (नोट 3 देखें) 9.5 वममी और
साोंके वतक मोटाई उससे अवधक
9.5 वममी तक की मोटाई, 9.5 वममी को छोड़कर
मोटाई
वममी वममी वममी वममी
चौड़ाई W 12.7 25.4 38.1 38.1 (अवधकतम)
(अवधकतम)
गेज लोंबाई L 50.8 101.6 203.2 203.2
समानाोंतर लोंबाई P 63.5 114.3 228.6 228.6
शोल्डर के रूप में 25.4 25.4 25.4 25.4
विज्या (न्यूनतम) R
लगभग कु ल लोंबाई 203.2 304.8 457.2 457.2610 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
जब परीिण की जा रही सामग्री की चौड़ाई मानक तन्यता परीिण टुकड़ो ों को तैयार करने की
अनुमवत देने के वलए अपयायप्त हो तो सामग्री की पूरी चौड़ाई िाले टुकड़े का उपयोग वकया जा सकता है।
नोट:
(1) कु छ सामग्री के वलए सीधे समानाोंतर परीिण टुकड़ो ोंका उपयोग करना सुविधाजनक है।
(2) कु छ नॉन-फे रस धातुओ ों के वलए कई बार ऐसे मानक परीिण टुकड़ो ों का उपयोग करना
सुविधजनक होता है जहाों 6.3 वममी से अवधक मोटाई के वलए चौड़ाई 12.7 वममी और गेज लोंबाई
50.8 वममी हो।
(3) 6.3 वममी से कम साोंके वतक मोटाई की सामग्री के वलए कॉलम (iii) में वदए गए पररमाप का
परीिण टुकड़ा वसफय फे रस धातुओ ों के वलए होगा।
परीिण टुकड़ा A-1
2. विशे शीट और क्तस्टरप सामवग्रयो ों(उदाहरण के वलए डीप प्रेवसोंग ऑपरेशन्ऱ के वलए उपयोग वकया
जाने िाला स्टील) पर तन्यता परीिण में वनम्नवलक्तखत िैकक्तिक परीिण टुकड़े का उपयोग वकया
जा सकता है: -
वचत्र 2
मानक राउंड परीिण टुकडे
परीिण टुकड़ा B
3. मुख्यतः 25.4 वममी तक के व्यास िाले मशीन न वकए गए रॉडटस और छड़ो ों के वलए (कास्ट
धातुओ ोंको छोड़कर[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 611
गेज लोंबाई G = 203.2 वग्रप्स P के बीच लोंबाई 9D से कम नही ोंहोनी चावहए
वचत्र 3
प्रपि ख से सभी परीिण टुकड़े एक समान हैं और एक ही सामग्री के वलए समान प्रवतशत
दीघीकरण प्रदान करते हैं। िे 203.2 वममी गेज लोंबाई 38.1 वममी चौड़ाई और 12.7 वममी मोटाई के
मानक फ्लैट टुकड़ो ोंके समान ही दीघयकरण प्रदान करते हैं।
नोट: जब कॉस्ट धातुओ ोंको छोड़कर मशीन न वकए गए िगायकार और टकोणीय छड़ो ोंपर तन्यता
परीिण वकए जाते हैं तो गेज लोंबाई फ्लैट के बीच की दूरी का 8 गुना होनी चावहए और वग्रप्स के
बीच लोंबाई फ्लैट के बीच की दूरी के 9 गुना से कम नही ोंहोनी चावहए।
4. 25.4 वममी से अवधक व्यास िाले रॉडटस और छड़ो ोंके वलए (कॉस्ट धातुओ ों को छोड़कर)
गेज की लोंबाई G = 4D; वग्रप्स P के बीच लोंबाई 4.5D से कम नही ोंहोनी चावहए
वचत्र 4
5. सामान्य उद्देश्य के वलए मशीन राउोंड परीिण टुकड़ा
वचत्र. 5612 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
गेज की लोंबाई G = 50.8 वममी; समानाोंतर लोंबाई P 57.2 वममी से कम होनी चावहए
व्यास D = 14.3 वममी; हृास-सेक्सनल िेि A = 161.3 वममी2
शोल्डर पर विज्या = रॉट मेटल के वलए 12.7 वममी न्यूनतम और कॉस्ट मेटल के वलए 63.5 वममी
न्यूनतम
6. सामान्य उद्देश्य के वलए मशीन परीिण टुकड़े (कॉस्ट आइरन को छोड़कर).
वचत्र. 6
हृास-सेक्शन िेि A = D2π
-----
4
गेज की लोंबाई G = 4√A = 3.54D
समानाोंतर लोंबाई P = 9/8 G न्यूनतम = 3.98D न्यूनतम
रॉट मेटल के वलए शोल्डर पर विज्या = G/4 न्यूनतम (0.88 Dन्यूनतम)
कास्ट मेटल के वलए शोल्डर पर विज्या = G/4 न्यूनतम (4.40 Dन्यूनतम)
उपयुय् त पररमाप के अनुरूप सभी परीिण टुकड़ेसों बोंवधत शोल् डर विज् या िाले मानक परीिण
टुकड़े C के समान हैं और िह उसी सामग्री के वलए परीिण टुकड़े के समान प्रवतशत दीघीकरण दशोते हैं।
सहायक मानक राउोंड परीिण टुकड़ो ोंके वलए सोंस् तुत पररमाप नीचे तावलका में वदये गये हैं। तुलना
के वलए मानक परीिण टुकड़े C (14.3 वममीव्यास) को शावमल वकया गया है। तथावप कोई परीिण टुकड़ा
वजसका व् यास 3.2 वममी से कम नही ों है और वजसका पररमाप सहायक मानक रूप के अनुकू ल है उसे
सहायक मानक परीिण टुकड़ा माना जाएगा[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 613
व्यास D हृास- गेज लोंबाई G समानाोंतर शोल्डर पर विज्या R
सेक्सनल िेि लोंबाई P
रॉट मेटल कॉस्ट मेटल
A (न्यूनतम)
वममी वममी2 वममी वममी वममी वममी
28.65 645.2 101.6 114.3 25.4 127
24.8 483.8 87.9 98.8 21.8 109.2
20.3 322.6 71.6 80.8 17.8 88.9
14.3 161.3 50.8 57.2 12.7 63.5
10.8 91.1 38.1 42.9 9.4 47
10.1 80.6 35.8 40.1 8.9 44.4
9 64.5 32 36 7.8 39.3
7.2 40.3 25.4 28.4 6.3 31.2
5.7 25.8 20.3 22.9 5 25.4
4 12.9 14.2 16 3.6 17.8
3.2 7.9 11.2 12.7 2.8 14614 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पररवशष्ट-ङ
काबषन टील बायलर गुणित्ता प्लेट की हृीप गुणित्ता हेतु साक्ष्य परीिण- विवशष्टता
परीिण की प्रकृ वत
1. परीिण में तन्यता हृीप स्टरेस परीिण शावमल होगा वजसे 450°C तापमान और 11.25
वकग्रा/वममी2 के स्टरेस के साथ कम से कम 48 घोंटे की अिवध में पूरा वकया जाएगा। इन क्तस्थवतयो ोंमें
24 और 48 घोंटे के बीच हृीप किय तक कॉडय लोप 50x10= 4 वडग्री स्टरेन प्रवत घोंटा से अवधक
नही ोंहोना चावहए।
सामग्री की ल्पथवत
2. सामग्री पर सामान्य क्तस्थवत में परीिण वकया जाना चावहए। ऐसा करने के वलए सामान्य तापमान
875 °C से 925 °C तक होना चावहए और प्लेट सेंपल को एक घोंटे प्रवत इोंच मोटाई के अनुसार
सामान्य तापमान पर रखा जाना चावहए और उसे जहाों हिा न चल रही हो िहाों ठोंडा वकया जाना
चावहए।
परीिण का तापमान
3. (क) तापमान का मापन- विवनवदयष्ट स तापमान हेतु उपयुि थमोंकपि द्वारा नमूने के तापमान को
मापा जाएगा। गेज के प्रत्येक छोर पर एक-एक थमोंकपि लगे होने चावहए वजनका उपयोग 51
वममी तक की लोंबाई िाले गेज के परीिण टुकड़े के वलए वकया जाएगा और लोंबे गेज तथा गेज की
लोंबाई के बीच में लगे अवतररि थमोंकपि के वलए वकया जाएगा।
थमोंकपि का परीिण टुकड़े के साथ थमयल से बेहतर तारतम्य होना चावहए और उसे एसबेसटस
टेप अथिा समतुल् तापािरोधन ढक्कन से ढके होने के कारण फनेस से आनेिाली सीधी ताप से
बचाना चावहए।
कोल्ड जोंक्शन का रख-रखाि ज्ञात तापमान पर वकया जाना चावहए जो मकय री थमायमीटर द्वारा दजय
वकया जाना चावहए। इसके साथ-साथ कोल्ड जोंक्शन के तापमान में पररितयन होने के कारण
परीिण में होनेिाली िुवट को वीकतः ठीक करने के वलए एक उवचत प्रणाली का प्रािधान वकया जाना
चावहए।
(ख) तापमान वनयंत्रण- खोंड(क) में विवनवदयष्ट स दो (अथिा तीन) थमोंकपि 3°C के भीतर एक-
दूसरे के समरूप होने चावहए और इन मापे गए तापमानो ों का औसत परीिण तापमान के रूप में[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 615
वलया जाना चावहए जहाों पूरे परीिण के दौरान तापमान 450°C वजसे + 2°C तक बााया जा
-
सकता है, में पररितयन नही ोंहोना चावहए।
अन्यथा तापमान की पयाप्त रीवडोंग का लगातार ररकॉडय रखा जाना चावहए जो यह इोंवगत करेगा वक
तापमान की क्तस्थवत सोंतो जनक है।
(ग) लोवडंग से पूिष हीवटंग की अिवध- लोड करने के कम से कम एक घोंटे पहले नमूने का
विवनवदयस्ट तापमान बनाए रखा जाना चावहए।
टरेस
4. वनधायररत स्टरैस लाने के वलए अपेवित लोड को पााँच वमनट की अिवध से कम के वलए धीरे-धीरे
बााया जाना चावहए वजसमें शॉक का उपयोग नही ों वकया जाएगा और ऐसा स्टरैस ± 2½ प्रवतशत
के बराबर होगा।
टरेन मापने िाले उपकरण की सेंसीवटविटी
5. एक्स्टेंसोमीटर की सेसीवटविटी इस प्रकार की होनी चावहए वजससे वक स्टरेन को लगभग 0.00002
तक मापा जा सके ।
रीवडंग
6. हृीप किय को लाने के वलए 48 घोंटे तक बार-बार स्टरेन रीवडोंग की जाएगी और और कॉडय लोप को
24िें और 48िें घोंटे में िहृ पर वबोंदुओ ों के बीच खीचों े गए तार से मापा जाएगा।
पुन: परीिण
7. यवद सामग्री परीिण में सफल नही ोंहो पाती, परोंतु कॉडय लोप 60x10 =6o स्टरेन प्रवतघोंटे से ऊपर
नही ोंजाता, तब विवनमायता के अनुरोध पर पुनः परीिण वकया जा सकता है और इसे सोंतो जनक
पाए जाने पर या सिम व्यक्ति के वििेकावधकार से विवनवदयष्ट स से 5 प्रवतशत कम के स्टरैस पर एक
पास परीिण वीकीकार वकया जा सकता है।616 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पररवशष्ट च
पाइप,िाल्व तथा वफवटंग्स हेतु फ्लैंज
तावलका क: 50 पाउंड के ऊपर और 100 पाउंड तक के वलए प्रवत िगष इंच कायषशील िाष्प दबाि
पाइपो ोंका फ्लैंज बोल्ट् बोल्ट् की सोंख्या फ्लैंज की मोटाई
नोमीनल का सकय ल और व्यास (ऑफ कास्ट कास्ट स्टील और
आोंतररक
व्यास का व्यास सेंटर लाइन) आयरन िोजों स्टेंप अथिा फोजय वकया गया
व्यास
राट आयरन अथिा
स्टील(सोंख्या देखें)
50 50 100 50 50 100 50 पाउोंड तक 100 पाउोंड
50 पाउोंड पाउोंड पाउोंड पाउोंड पाउोंड पाउोंड तक
पाउोंड 100 तक तक 100 तक तक
100पाउों पाउोंड पाउोंड
ड तक तक तक
इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच.
½ 3¾ 2-5/58 4½ 4½ 3/8 3/8 3/8 3/16 ¼
¾ 4 2-7/8 4½ 4½ ½ 3/8 3/8 3/16 ¼
1 4½ 3¼ 4½ 4½ ½ 3/8 3/8 3/16 9/32
1¼ 4¾ 3-7/16 4½ 4½ 5/8 ½ ½ ¼ 5/16
1½ 5¼ 3-7/8 4½ 4½ 5/8 ½ ½ ¼ 11/32
2 6 4½ 4-5/8 4-5/8 ¾ 9/16 9/16 5/16 3/89
2½ 6½ 5 4-5/8 4-5/8 ¾ 9/16 9/16 5/16 13/32
3 7¼ 5¾ 4-5/8 4-5/8 ¾ 9/16 9/16 3/8 7/16
3½ 8 6½ 4-5/8 8-5/8 ¾ 9/16 9/16 3/8 15/32
4 8½ 7 4-5/8 8-5/8 7/8 11/16 11/16 3/8 ½
*4½ 9 7½ 8-5/8 8-5/8 7/8 11/16 11/16 7/16 ½
5 10 8½ 8-5/8 8-5/8 7/8 11/16 11/16 ½ 9/16
6 11 9¼ 8-5/8 8¾ 7/8 11/16 11/16 ½ 11/16
7 12 10¼ 8-5/8 8¾ 1 ¾ ¾ ½ ¾
8 13¼ 11½ 8-5/8 8¾ 1 ¾ ¾ ½ ¾
9 14½ 12¾ 8-5/8 12¾ 1 ¾ 13/16 5/8 13/16[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 617
10 16 14 8¾ 12¾ 1 ¾ 7/8 5/8 7/8
*11 17 15 8¾ 12¾ 1-1/8 7/8 15/16 5/8 15/16
12 18 16 12¾ 12-7/8 1-1/8 7/8 1 5/8 1
*13 19¼ 17¼ 12¾ 12-7/8 1-1/8 7/8 1 ¾ 1
14 20¾ 18½ 12-7/8 12-7/8 1¼ 1 1 ¾ 1
15 21¾ 19½ 12-7/8 12-7/8 1¼ 1 1 ¾ 1
इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच.
16 22¾ 20½ 12-7/8 12-7/8 1¼ 1 1 ¾ 1
*17 24 21¾ 12-7/8 12-7/8 1-3/8 1-1/8 1-1/8 7/8 1-1/8
18 25¼ 23 12-7/8 16-7/8 1-3/8 1-1/8 1-1/8 7/8 1-1/8
*19 26½ 24 12-7/8 16-7 1-3/8 1-1/8 1¼ 7/8 1¼
20 27¾ 25¼ 16-7/8 16-7 1½ 1¼ 1¼ 1 1¼
21 29 26½ 16-7/8 16-1 1½ 1¼ 1-3/8 1 1-3/8
*22 30 27½ 16-1 16-1 1½ 1¼ 1-3/8 1 1-3/8
23 31 28½ 16-1 16-1 1-5/8 1-3/8 1-3/8 1-1/8 1-3/8
24 32½ 29¾ 16-1 16-1 1-5/8 1-3/8 1½ 1-1/8 1-1/8
* अन्य वििरण के वलए भी इनसे सोंबोंवधत तावलकाओ ों के अोंत में वदए गए नोट को देखें।
तावलका ख: प्रवत िगष इंच 150 पाउंड के ऊपर और 250 पाउंड तक कायषशील िाष्प दबाि हेतु
पाइप का नोमीनल फ्लैंज का बोल्ट् बोल्ट् की सोंख्या और फ्लैंज की मोटाई
आोंतररक व्यास व्यास सकय ल का व्यास (ऑफ सेंटर कास्ट स्टील और िोजों स्टील
व्यास लाइन) आयरन (स्टेंप्ड अथिा फोर्ज्य)
(नोट देख)ें
150 150 150 पाउोंड के िल 150 150 250
पाउोंड पाउोंड 250 पाउोंड तक पाउोंड पाउोंड पाउोंड तक
250 250 तक तक
पाउोंड तक पाउोंड तक
इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच.
के िल 150 ½ 2¾ 2-5/8 4½ 4-5/8 ½ 3/8 —618 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पाउोंड
¾ 4 2-7/8 4½ 4-5/8 ½ 3/8 —
के िल 250 ½ 4½ 3¼ — 4-5/8 — — —
पाउोंड
¾ 4½ 3¼ — 4-5/8 — — ½
1 4¾ 3-7/16 4-5/8 ½ 3/8 9/16
1¼ 5¼ 3-7/8 4-5/8 5/8 7/16 11/16
2½ 5½ 4-1/8 4-5/8 5/8 ½ 11/16
2 6½ 5 4-5/8 ¾ 5/8 ¾
2½ 7¼ 5¾ 8-5/8 ¾ 5/8 ¾
3 8 6½ 8-5/8 ¾ 5/8 7/8
3½ 8½ 7 8-5/8 7/8 ¾ 7/8
4 9 7½ 8-5/8 7/8 ¾ 1
*4½ 10 8¼ 8¾ 7/8 ¾ 1
5 11 9¼ 8¾ 1 7/8 1-1/8
6 12 10¼ 12¾ 1 7/8 1-1/8
इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच. इोंच.
7 13¼ 11½ 12¾ 1 7/8 1¼
8 14½ 12¾ 12¾ 1-1/8 1 1¼
9 16 14 12-7/8 1-1/8 1 1-3/8
10 17 15 12-7/8 1-1/8 1 1-3/8
*11 18 16 16-7/8 1¼ 1-1/8 1½
12 19¼ 17¼ 16-7/8 1¼ 1-1/8 1½
*13 20¾ 18½ 16-1 1¼ 1-1/8 1-5/8
14 21¾ 19½ 16-1 1-3/8 1¼ 1-5/8
15 22¾ 20½ 16-1 1-3/8 1¼ 1¾
16 24 21¾ 20-1 1-3/8 1¼ 1¾
*17 25¼ 23 20-1 1½ 1-3/8 1-7/8
18 26½ 24 20-1-1/8 1½ 1-3/8 1-7/8
*19 27¾ 25¼ 20-1-1/8 1½ 1-3/8 2[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 619
20 29 26½ 24-1-1/8 1-5/8 1½ 2
21 30 27½ 24-1-1/8 1-5/8 1½ 2-1/8
*22 31 28½ 24-1-1/8 1-5/8 1½ 1-1/8
*23 32½ 29¾ 24-1-1/8 1¾ 1-5/8 2¼
24 33½ 30¾ 24-1¼ 1¾ 1-5/8 2¼
* फ्लैंज, पाइप तथा अन्य वििरण के वलए भी इनसे सोंबोंवधत तावलकाओ ों के अोंत में वदए गए नोट को देखें।
तावलका ग : प्रवत िगष इंच 250 पाउंड के ऊपर और 350 पाउंड तक कायषशील िाष्प दबाि हेतु
पाइप का रॉट पाइप का फ्लैंज का व्यास बोल्ट् सकय ल का बोल्ट् की सोंख्या फ्लैंज की मोटाई
नोमीनल िास्तविक बाह्य व्यास और व्यास (ऑफ कास्ट स्टील और
आोंतररक व्यास
व्यास सेंटर लाइन) िोजों स्टील (स्टेंप्ड
अथिा फोर्ज्य)
(नोट देख)ें
इोंच. इोंच. इोंच. इोंच. इोंच. इोंच.
½ 27/32 4½ 3¼ 4-5/8 5/8
¾ 1-1/6 4½ 3¼ 4-5/8 5/8
1 1-11/32 4¾ 3-7/16 4-5/8 ¾
1¼ 1-11/16 5¼ 3-7/8 4-5/8 ¾
1½ 1-29/32 5½ 4-1/8 4-5/8 7/8
2 3-3/8 6½ 5 4¾ 1
2½ 3 7¾ 5¾ 8¾ 1
इोंच. इोंच. इोंच. इोंच. इोंच. इोंच.
3 3½ 8 6½ 8¾ 1¼
3¼ 4 8½ 7 8¾ 1¼
4 4½ 9 7½ 8¾ 1-3/8
4½ 5 10 8¼ 8-7/8 1-3/8
5 5½ 11 9¼ 8-7/8 1½
6 6½ 12 10¼ 12-7/8 1½620 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
7 7½ 13¼ 11½ 12-7/8 1-5/8
8 8½ 14½ 12¾ 12-7/8 1-5/8
9 9½ 16 14 12-1 1¾
10 10½ 17 15 12-1 1-7/8
11* 11½ 18 16 16-1 1-7/8
12 12½ 19¼ 17¾ 16-1 2
13* 14 20¾ 18¾ 16-1-1/8 2
14 15 21¾ 19¾ 16-1-1/8 2-1/8
15 16 22¾ 20¾ 16-1-1/8 2-1/8
16 17 24 21¾ 20-1-1/8 2¼
17* 18 25¼ 23 20-1-1/8 2-3/8
18 19 26½ 24 20-1¼ 2-3/8
19* 20 27¾ 25¼ 20-1¼ 2½
20 21 29 26½ 24-1¼ 2½
21 22 30 27½ 24-1¼ 2-5/8
22* 23 31 28½ 24-1¼ 2-5/8
23* 24 32½ 29¾ 24-1-3/8 2¾
24 25 33½ 30¾ 24-1-3/8 2¾
* फ्लैंज, पाइप तथा अन्य वििरण के वलए भी इनसे सोंबोंवधत तावलकाओ ों के अोंत में वदए गए नोट को देखें।
रॉट पाइप का िास्तविक बाह्य व्यास उपयुयि सभी तावलकाओ ोंपर समान रूप से लागू होगा।
तावलका घ: प्रवत िगष इंच 350 पाउंड के ऊपर और 450 पाउंड तक कायषशील िाष्प दबाि हेतु
पाइप का रॉट पाइप का फ्लैंज का व्यास बोल्ट् सकय ल बोल्ट् की सोंख्या फ्लैंज की मोटाई
नोमीनल िास्तविक बाह्य का व्यास और व्यास कास्ट स्टील और िोजों
आोंतररक व्यास
व्यास (ऑफ सेंटर स्टील (स्टेंपड़ अथिा
लाइन) फोर्ज्य) (नोट देख)ें
इोंच. इोंच. इोंच. इोंच. इोंच. इोंच.
½ 27/32 4½ 3¼ 4-5/8 ¾
¾ 1-1/16 4½ 3¼ 4-5/8 ¾
1 1-11/32 5 3¾ 4-5/8 7/8
1¼ 1-11/16 5¼ 3-7/8 4-5/8 1/8[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 621
1½ 1-29/32 6 4½ 4¾ 1
2 2-3/8 6½ 5 8-5/8 1
2½ 3 7¼ 5¾ 8¾ 1-1/8
3 3½ 8 6½ 8¾ 1¼
3½ 4 9 7¼ 8-7/8 1¼
4 4½ 9½ 7¾ 8-7/8 1-3/8
*4½ 5 10 8¼ 8-7/8 1½
5 5½ 11 9¼ 12-7/8 1-5/8
6 6½ 12 10¼ 12-7/8 1-5/8
7 7½ 13½ 11½ 12-1 1¾
8 8½ 14½ 12½ 12-1 1-7/8
9 9½ 16 14 16-1 2
10 10½ 17 15 16-1 2
*11 11½ 18½ 16¼ 16-1-1/8 2-1/8
12 12½ 19¼ 17 16-1-1/8 2¼
*13 14 21½ 19 16-1¼ 2-3/8
14 15 22½ 20 16-1¼ 2-3/8
15 16 23¾ 21¼ 20-1¼ 2½
16 17 24¾ 22¼ 20-1¼ 3-5/8
नोट:
यह अनुशोंसा की जाती है वक *वचक्तन्हत आकार का उपयोग करने से बचना चावहए।
तावलका में वदए गए यवद उपयोग वकया जाता है तो फ्लैंज की मोटाई में फ्लैंज का ऊपर उठा हुआ भाग भी
शावमल होना चावहए जो 1/16 से अवधक नही ोंहोना चावहए।
1/2 इोंच तथा 5/8 इोंच बोल्ट् हेतु वछद्रो ों का व्यास 1/6 होना चावहए जो बोल्ट् के व्यास से बड़ा और 1/8
बोल्ट् से बड़े आकार के होने चावहए।
आयरन अथिा स्टील फ्लैंज(स्टेंप्ड अथिा फोज्ड़य) बॉस से स्क्रू या ररिेवटड अथिा वफिेट से िेल्ड वकया
जाना चावहए, फ्लैंज को स्टील से बने होने के कारण 150 पाउोंड प्रवत िगय इोंच से ऊपर दबाि डाला जाना
चावहए।
जैसा वक नीचे बताया गया है 2 इोंच और उससे अवधक के नोमीनल व्यास िाले पाइप हेतु (िाल्व को लगाए
वबना) फ्लैंज (स्टटमेड अथिा फोज्ड़य) को विशे रूप से िेल्ड वकया जाता है,सभी मामलो ों में चयवनत फ्लैंज
जो समतुल् तावलका में पाइप के अगले छोटे आकार के वलए वदए गए अथिा वजनका विशे रूप से
उिेख वकया गया है।622 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
तावलका ङ : पाइप, िाल्व तथा वफवटंग्स हेतु फ्लैंज
प्रवत िगष इंच 450 पाउंड के ऊपर और 600 पाउंड तक कायषशील िाष्प दबाि हेतु
पाइप का रॉट पाइप का फ्लैंज का बोल्ट बोल्ट बोल्ट का फ्लैंज की मोटाई जोईवं टंग
नोमीनल लगभग व्यास सकष ल की व्यास काट टील;टील णे स का
आकार बाहरी व्यास का व्यास संख्या (टेंप्ड अथिा णोजषड) व्यास
बॉस के ऊपर स्क्रू
अथिा ररिेटेड वकया
गया अथिा वफल्लेट
के साथ िेल्ड वकया
गया
1 1(क) 2 3 4 5 6 7
इोंच. इोंच. इोंच इोंच. इोंच इोंच इोंच इोंच
½ 27/32 4½ 3¼ 4 5/8 ¾ 2¼
¾ 1-1/16 4½ 3¼ 4 5/8 ¾ 2¼
1 1-11/32 5 3¾ 4 5/8 7/8 2½
1¼ 1-11/16 5¼ 3-7/8 4 5/8 7/8 2¾
1½ 1-29/32 6 4½ 4 ¾ 1 3
2 2-3/8 6½ 5 8 5/8 1 3½
2½ 3 7¼ 5¾ 8 ¾ 1-1/8 4
3 3½ 8 6½ 8 ¾ 1¼ 4½
3½ 4 9 7¼ 8 7/8 1¼ 5
4 4½ 9½ 7¾ 8 7/8 1-3/8 5½
4½ 5 10 8¼ 8 7/8 1½ 6
5 5½ 11 9¼ 12 7/8 1-5/8 6½
6 6½ 12 10¼ 12 7/8 1¾ 7½
7 7½ 13½ 11½ 12 1 1-7/8 8¾
8 8½ 14½ 12¾ 12 1 2 9¾
9½ 9½ 16 14 16 1 2-1/8 10¾
10 10½ 17 15¼ 16 1 2¼ 11¾
11 11½ 19 17 16 1-1/8 2-3/8 12¾
12 12½ 20 18 16 1-1/8 2½ 13¾
13 14 21¾ 19½ 16 1¼ 2-5/8 15
14 15 23 20¾ 16 1¼ 2¾ 16[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 623
15 16 24 21¾ 20 1¼ 2-7/8 17
16 17 25¼ 23 20 1¼ 3 18
तावलका च: पाइप, िाल्व तथा वफवटंग्स हेतु टील फ्लैंज
प्रवत िगष इंच 600 पाउंड के ऊपर और 900 पाउंड तथा 800 वडग्री फारेनहाईट (427 °C ) तापमान
तक कायषशील िाष्प दबाि हेतु
पाइप का रॉट पाइप का फ्लैंज का बोल्ट् का बोल्ट् की बोल्ट् का फ्लैंज की जोईोंवटोंग
नोमीनल िास्तविक व्यास व्यास सोंख्या व्यास मोटाई फ़े स का
आकार बाहरी व्यास व्यास
1 1(a) 2 3 4 5 6 7
इोंच इोंच इोंच इोंच इोंच इोंच इोंच इोंच
½ 5 3½ 4 ¾ 7/8 2
¾ 1-1/16 5 3½ 4 ¾ 7/8 2
1 1-11/32 5½ 4 4 ¾ 1 2¼
1¼ 1-11/16 5¾ 4¼ 4 ¾ 1-1/8 2½
1½ 1-29/32 6¼ 5¾ 4 ¾ 1-1/8 2¾
2 2-3/8 6¾ 5¼ 8 ¾ 1¼ 3¼
2½ 3 7¼ 5¾ 8 ¾ 1¼ 3¾
3 3½ 8 6½ 8 7/8 1-3/8 4¼
3½ 4 9¼ 7½ 8 7/8 1½ 4¾
4 5 9¾ 8 8 1 1-5/8 5¼
4½ 5½ 10½ 8½ 8 1 1-5/8 5¾
5 6 11¼ 9¼ 12 7/8 1¾ 6¼
6 7 12¾ 10¾ 12 1 2 7¼
7 8½ 14¾ 12½ 12 1-1/8 2¼ 8½
8 9½ 16¼ 14 12 1¼ 2½ 9½
9 10½ 17¼ 15¼ 16 1-1/8 2-5/8 10½
10 11½ 19 16¾ 16 1¼ 2-7/8 11½
*10½ 12½ 21 18½ 16 1-3/8 3-1/8 12¾624 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
*11¾ 14 22¾ 20 16 1½ 3¼ 13¾
*12-5/8 15 24 21¼ 16 1½ 3½ 14¾
*13½ 16 25½ 22¾ 20 1½ 3¾ 16
*14-3/8 17 27½ 24½ 20 1-5/8 4 17
*15¼ 18 29¼ 26 20 1¾ 4½ 18
* आकार का वनधायरण कॉलम 1(क) में वदये गए बाहरी व्यास के आयाम के अनुसार वकया जाना चावहए।
कॉलम 1 (नोमीनल बोर) में वदए गए आोंकड़े के अनुरूप होते है और के िल सूचना के वलए वदए जाते है।
तावलका छ : पाइप, िाल्व तथा वफवटंग्स हेतु टील फ्लैंज
(नोट और पररवशष्ट स के साथ उपयोग वकया जाना चावहए)
प्रवत िगष इंच 900 पाउंड के ऊपर और 1400 पाउंड तक तथा 800 वडग्री फारेनहाईट (427 °C )
तापमान तक कायषशील िाष्प दबाि हेतु
पाइप का रॉट पाइप का फ्लैंज का बोल्ट् का बोल्ट् की बोल्ट् का फ्लैंज की जोईोंवटोंग
नोमीनल अवधकतम व्यास व्यास सोंख्या व्यास मोटाई फ़े स का
आकार बाहरी व्यास व्यास
1 1(a) 2 3 4 5 6 7
इोंच इोंच इोंच इोंच इोंच इोंच इोंच इोंच
½ 27/32 5½ 4 4 ¾ 1 2¼
¾ 1-1/16 5½ 4 4 ¾ 1 2¼
1 1-11/32 5¾ 4¼ 4 ¾ 1-1/8 2½
1¼ 1-11/16 6¼ 4¾ 4 7/8 1¼ 2¾
1½ 2-3/8 6¾ 5¼ 8 ¾ 1-3/8 3
2 3 7¼ 5¾ 8 ¾ 1-3/8 3½
2½ 3 8 6½ 8 7/8 1-5/8 4½
3 4 9¼ 7½ 8 1 1-7/8 5
3½ 4 10½ 8½ 8 1-1/8 2-1/8 5½
4 5 11¼ 9¼ 8 1-1/8 2¼ 6
4½ 5½ 11¾ 10 12 1 2-3/8 6½
5 6½ 12¾ 10¾ 12 1-1/8 2-5/8 7
6 7½ 14¾ 12½ 12 1¼ 2-7/8 8
7 9 17 14½ 12 1-3/8 3¼ 9¼[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 625
8 10½ 18¾ 16 12 1½ 3½ 10½
9 11½ 20 17½ 16 1-3/8 3¾ 11¾
10 12½ 22 19¼ 16 1½ 4¼ 12¾
मानक पाइप फ्लैंज
फ्लैंज आयाम की विवभन्न तावलकाओ ों (तावलका एफ.टी) को पाइप और िेस्सेल के अनुकू ल वडजाइन वकया
गया है वजसमें 427 °C के अवधकतम तापमान िाले िाष्प होते है।
यवद तापमान 427 °C से अवधक होता है और तापमान 482 °C से अवधक नही ों होता है तब
वनम्नवलक्तखत तावलका को अगले उच्चतर दबाि के वलए उपयोग वकया जाना चावहए।
वदए गए दबाि हेतु ऐसे जल के पाइप वजनमें जल का तापमान 232 °C से अवधक नही ोंहोता है,
ऐसे जल के पाइप को अगले वनम्नतर तावलका के वलए फ्लैंज के साथ लगाया जाना चावहए न वक
उक्तिवलक्तखत दबाि और 427 °C के अवधकतम तापमान हेतु अपेवित िाष्प के वलए।
सभी मामलो ोंमें हाईडरॉवलक परीिण दबाि को अवधकतम अनुमत काययशील दबाि के दोगुना होना
चावहए वजसके वलए पाइप का उपयोग वकया जाना अध्यधीन है।
तावलका ज : पाइप फ्लैंज तावलका के वलए अनुमत दबाि को दशाषना
दबाि िाष्प िाष्प जल हाईडरावलक
परीिण दबाि
Kg/cm2 (g) 482°सी पर 427° सी पर 232° सी पर
के जी/सेमी2(जी)
तावलका तावलका तावलका
98.4 - T S 196.8
63.3 T S R 126.5
42.2 S R K 84.3
31.6 R K J 63.2
24.6 K J H 49.2
17.5 J H F 35.1
10.5 H F - 21.1626 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पररवशष्ट छ
सुरिा िाल्व का वनिषहन दिता परीिण
क. सामान्य
(i) परीिण का उद्देश्य और तरीका ऐसा होगा वक एक उपयुि डेटा प्रदान वकया जा सके
वजससे समीकरण (5/ 7) में एक क्तस्थर 'c' वनधायररत वकया जा सके । इस प्रयोजन के वलए परीिण
वकए जाने से पहले वनम्नवलक्तखत जानकारी वनरीिण प्रावधकारी को प्रदान की जाएगी:
(क) परीिण वकए जाने िाले मानको ोंऔर उनका प्रवतवनवधत्व करने िाले िाल्वो ोंऔर क्तरोंग्स की
श्रेणी पर पूणय वििरण।
(ख) उपकरण और प्रस्तावित अोंशाोंकन प्रवहृया सवहत परीिण ररग का वििरण।
(ग) परीिण के वलए प्रयुि भाप का प्रस्तावित स्रोत, िमता, दबाि, तापमान।
(ii) सभी परीिण वनरीिण प्रावधकारी या सिम व्यक्ति द्वारा देखे जाएोंगे।
(iii) परीिण उन सुरिा िाल्वो ों की पररचालन विशे ताओ ों को वनधायररत करने, वजनके वलए एक
क्तस्थराोंक वनधायररत वकया जाना है और सुरिा िाल्व की वनियहन दिता भी स्थावपत करने के वलए
वकए जाएोंगे।
(iv) जहाों सोंभि हो, पररचालन विशे ताओ ों और वनियहन दिता को वनधायररत करने के वलए
परीिण समान भाप, समान दबाि पररक्तस्थवत और समान स्थान का उपयोग करके वकए
जाएोंगे। जब परीिण अलग-अलग वकए जाते हैं, तो प्रत्येक मामले में िाल्व पूणय होगों े और इसमें
सभी आोंतररक भाग जैसे ब्लो-डाउन समायोजन ररोंग शावमल होगों ी।
(v) वनयत दबाि वजस पर पररचालन विशे ताओ ों का वनधायरण वकया जाता है िह न्यूनतम
वनयत दबाि होगा वजसके वलए उपयोग वकए गए क्तरोंग को वडजाइन वकया गया है। परीिण भाप
का उपयोग करके वकए जाएोंगे और वनयत दबाि, िाल्व के प्रकार के वलए वनवदयष्ट स करेगा, अवधक
दबाि पर वलफ्ट, का वनधायरण विवनयमन 168 में पररभाव त अनुसार होगा।
(vi) क (v) में िवणयत पररचालन विशे ता परीिणो ों को वनरीिण प्रावधकारी समाप्त कर सकता
है।
(vii) वनियहन दिता परीिण भाप का उपयोग करके वकया जाएगा और क (v) में िवणयत
ऑपरेवटि विशे ता परीिणो ोंके सापेि वकया जाएगा।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 627
(viii) जब वनरीिण प्रावधकारी सोंतुष्ट स हो जाता है वक िाल्व का वडजाइन सोंतो जनक ढोंग से
सोंचावलत होगा, यवद िाोंवछत हो, तो वडस्चाजय दिता का पता लगाने के वलए परीिण करते समय
िाल्व हेड को याोंविक रूप से प्रमावणत वलफ्ट पर रखने की अनुमवत होगी।
ख. परीिण कायषहृम में प्रयुि िाल्व
(i) परीिण वकए गए सुरिा िाल्व, जहाों तक व्यािहाररक हो, वनवमयत िाल्व के दबाि और
आकार सीमा का प्रवतरूप होना चावहए।
(ii) सोंचालन विशे ताओ ों और वनियहन दिता परीिण के वलए परीिण तीन आकारो ों या सीमा
में आकार की आधी सोंख्या, इनमें जो भी छोटा हो, न्यूनतम दो आकारो ोंके साथ वकए जाएोंगे।
(iii) जब सीमा बाा दी जाती है, तो वनरीिण प्रावधकारी के परामशय से, इस बात पर उवचत
विचार वकया जाएगा वक क्या और अवधक देखे गए परीिण आिश्यक हैं।
(iv) ऑपरेवटोंग विशे ताओ ों के वलए प्रत्येक आकार के िाल्व के वलए तीन अलग-अलग वनयत
दबाि पर परीिण वकया जाएगा।
(v) िाल्व के प्रत्येक आकार के वलए एक वनयत दबाि के सापेि वनियहन दिता परीिण वकया
जाएगा।
(vi) वीकीकायय औसत पररणाम प्राप्त करने के वलए प्रत्येक परीिण कम से कम तीन बार वकया
जाएगा।
(vii) अनूठे या विशे वडजाइन के िाल्वो ोंके मामले में, वजनमें से के िल एक आकार का वनमायण
वकया जा रहा है, वनरीिण प्रावधकारी के साथ तालमेल से एक वनयत दबाि पर परीिण की
अनुमवत है। जब आकार या दबाि की सीमा बााई जाती है, तो वनरीिण प्रावधकारी के परामशय से
इस बात पर उवचत विचार वकया जाएगा वक क्या आगे के परीिण आिश्यक हैं।
ग. ल्पथरांक c का वनधाषरण
माना वक
Et सोंतृप्त भाप (वकग्रा/घोंटा) के परीिण परमाप िमता हो।
Pt सुरिा िाल्व इनलेट पर दबाि हो वजस पर िमता को मापा गया (बार गेज);
A िाल्व (वममी 2) के प्रकार के वलए उपयुि िेि हो, [विवनयम 169 (क) देखें+ ।
X परीिण के तहत िाल्व के प्रकार के वलए दबाि पर वीकीकायय प्रवतशत हो। (विवनयम 169 देखें)।628 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Ct परीिण से वनधायररत क्तस्थराोंक हो।
परीिण के पररणामो ोंपर अनुमत प्रसार को समायोवजत करने के वलए, िाल्व भागो ों और क्तरोंग्स पर
सहनशीलता, ‘ t’ के इस पररकवलत मान को विवनयमन 169 (क) के समीकरण (5/ 7 ) में उपयोग वकए
जाने िाले ‘ ’ के मान को प्राप्त करने के वलए 80% तक घटाया जाएगा । यह ये सुवनवश्चत करने के वलए है
वक सभी उत्पादन िाल्व, अपनी रेटेड वडस्चाजय िमता परीिण वकए गए िाल्व के प्रकार के वलए अनुमत
अवधकतम दबाि से कम पर प्राप्त करेंगे।
वनरीिण प्रावधकारी ‘ t’ के पररकवलत मूल् के 90% तक के अवधक अनुकू ल व्युत्पन्न कारक को
वीकीकार कर सकता है जहाों परीिण के तहत िाल्वो ोंका प्रदशयन और विवनमायण और क्तरोंग की सहनशीलता
लागू हो यह सुवनवश्चत करता है वक परीिण के तहत िाल्व के प्रकार के वलए वीकीकायय अवधक दबाि नही ों
होगा जब एक िाल्व सेिा में अपनी रेटेड िमता का वनियहन कर रहा हो, तो इसे पार नही ोंवकया जा सकता
है।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 629
पररवशष्ट ज
[विवनयम 295(7) देखें]
क. 100 वकग्रा/सेमी 2 (जी) या उससे अवधक के दबाि तथा 100,000 घंटे तक से संचालन िाले
पािर यूवटवलटी बॉयलर
(1) 100 वकग्रा/सेमी 2 (जी) या उससे अवधक के दबाि पर काम करने िाले और 1,00,000 तक
सोंचालन में रहे वबजली उत्पादन के वलए भाप पैदा करने िाले बॉयलरो ोंका वनरीिण की तारीख से
बारह महीने की समाक्तप्त के बाद, विवनयम 311 में िवणयत की गई प्रवहृया से नीचे वदए गए
अनुसार,राज्य में सोंबोंवधत सिम व्यक्ति द्वारा वनरीिण वकया जाएगा, सिम व्यक्ति को वनम्नवलक्तखत
अवभलेख सोंबोंवधत पररचालन प्रमाण पि की समाक्तप्त से कम से कम तीस वदन पहले उपलब्ध
कराया जाएगा तथा उनके द्वारा वफटनेस का प्रमाणीकरण जारी वकया जाएगा बशते िह सोंतुष्ट स हो
वक बॉयलर को बारह महीने की और अिवध के वलए सोंचावलत करने की अनुमवत दी जा सकती है।
(क) सुपरहीटर और रीहीटर का तापमान प्रचालन के वलए डेटा अवधग्रहण प्रणाली (डीएएस) के
आउटपुट से सोंचालन डेटा।
(ख) वपछले ि य के दौरान शट डाउन का वििरण उनके कारणो ोंऔर की गई कारयिाई के साथ।
(ग) ि य के दौरान बॉयलर के दबाि भागो ों पर वकए गए वकसी भी गैर-विनाशकारी परीिण के
अवभलेख।
(घ) बॉयलर के पानी की गुणित्ता को ऐसे बॉयलरो ोंकी आिश्यकता के अनुसार बनाए रखा जाता है
और गुणित्ता का डेटा ऑनलाइन प्रदान वकया जाता है।
(ङ) बॉयलर ट्यूब विफलता ररकॉडय (स्थान, मरम्मत वकए गए /प्रवतस्थावपत ट्यूबो ोंकी सोंख्या) ।
(2) विवनयम 311 में वदये गए प्रािधान के अनुसार चौबीस महीने की समाक्तप्त पर सोंबोंवधत सिम
व्यक्ति द्वारा वनरीिण वकया जाएगा । तथावप, यवद प्रमाणन अिवध की समाक्तप्त से पहले और
प्रमाणन के छह महीने के बाद वकसी भी समय पोंद्रह वदनो ोंया उससे अवधक के बोंद की योजना है,
तो सिम व्यक्ति को विवधित सूवचत वकया जाएगा तावक उि बोंद की अिवध के दौरान पूणय
वनरीिण वनधायररत वकया जा सके ।
ख. 100 वकग्रा/सेमी 2 (जी) तक के दबाि पर काम कर रहे और 100,000 घंटे तक या 25 िर्ष
तक के संचालन िाले पािर बॉयलर जो भी लागू हो
(1) 100 वकग्रा/सेमी 2 (जी) तक के दबाि पर काम करने िाले और 100,000 घोंटे तक सोंचालन में
400°C से ऊपर के बॉयलर और वबजली उत्पादन के वलए 400°C से कम पर विदटयुत पैदा करने के
वलए भाप बनाने बोइलरो ों के वलए सोंचालन के 25 साल हैं, विवनयम 311 में प्रदान की गई प्रवहृया और
वफटनेस के प्रमाणीकरण के अनुसार वकए गए वनरीिण की तारीख से बारह महीने की समाक्तप्त पर630 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
राज्य में सोंबोंवधत सिम व्यक्ति द्वारा पैरा ‚क‛ में सोंचालन ररकॉडय से सोंतुष्ट स होने पर, बारह महीने की
एक और अिवध के वलए चलाने की अनुमवत दी जाएगी।
(2) विवनयम 311 में वदये गए प्रािधान के अनुसार चौबीस महीने की समाक्तप्त पर सोंबोंवधत सिम
व्यक्ति द्वारा वनरीिण वकया जाएगा । तथावप, यवद प्रमाणन अिवध की समाक्तप्त से पहले और प्रमाणन
के छह महीने के बाद वकसी भी समय पोंद्रह वदनो ों या उससे अवधक के बोंद की योजना है, तो सिम
व्यक्ति को विवधित सूवचत वकया जाएगा तावक उि बोंद की अिवध के दौरान पूणय वनरीिण वनधायररत
वकया जा सके ।
ग. 100 वकग्रा/सेमी 2 (जी) या अवधक दबाि पर काम करने िाले और 100,000 घंटे से अवधक
संचालन में रहे बॉयलर
(1) जैसा वक विवनयम 270 में वदया गया है, 100 वकग्रा/सेमी 2 (जी) के दबाि में काम कर रहे और
वबजली उत्पादन के वलए भाप पैदा करने िाले बॉयलर के 100,000 घोंटे से अवधक के सोंचालन पर
राज्यो ों में सोंबोंवधत सिम व्यक्ति की सोंतुवष्ट स के वलए हर साल वनरीिण जारी रहेगा। तथावप, यवद इन
विवनयमो ोंके प्रािधानो ोंके अनुसार शे काययशील अिवध आकलन (आरएलए) बॉयलर पर वकया जाता
है और यवद सोंतो जनक पाया जाता है, तो उपरोि पैराग्राफ "क" के अनुसार प्रवहृया लागू होगी।
(2) विवनयम 270 में वदये गए प्रािधान के अनुसार चौबीस महीने की समाक्तप्त पर सोंबोंवधत सिम
व्यक्ति द्वारा वनरीिण वकया जाएगा । तथावप, यवद प्रमाणन अिवध की समाक्तप्त से पहले और प्रमाणन
के छह महीने के बाद पोंद्रह वदनो ों या उससे अवधक समय के बोंद की योजना है, तो सिम व्यक्ति को
विवधित सूवचत वकया जाएगा तावक उि बोंद की अिवध के दौरान पूणय वनरीिण वनधायररत वकया जा
सके ।
घ. 100 वकग्रा/सेमी 2 (जी) तक के दबाि पर काम कर रहे और 100,000 घंटे से अवधक संचालन में
रहे या 25 िर्ष तक संचालन में रहे बॉयलर जो भी लागू हो
(1) 400 °C से ऊपर िाले तथा 100 वकग्रा/सेमी 2 (जी) तक के दबाि पर काम करने िाले और
100,000 घोंटे से अवधक के सोंचालन रहे बॉयलर के के वलए और 400°C से कम पर सोंचावलत, 25
ि य तक सोंचावलत बॉयलरो ों का सोंचालन वनयम 311 में वदये गए प्रािधान के अनुसार हर ि य वनरीिण
के अधीन रहना जारी रहेगा। तथावप, यवद इन विवनयमो ोंके प्रािधानो ोंके अनुसार शे काययशील अिवध
आकलन (आरएलए) बायलर पर वकया जाता है और यवद सोंतो जनक पाया जाता है, तो उपरोि पैरा
"ख" के अनुसार प्रवहृया लागू होगी।
(2) विवनयम 311 में वदये गए प्रािधान के अनुसार चौबीस महीने की समाक्तप्त पर सोंबोंवधत सिम
व्यक्ति द्वारा वनरीिण वकया जाएगा । तथावप, यवद प्रमाणन अिवध की समाक्तप्त से पहले और प्रमाणन
के छह महीने के बाद वकसी भी समय पोंद्रह वदनो ों या उससे अवधक के बोंद की योजना है, तो सिम
व्यक्ति को विवधित सूवचत वकया जाएगा तावक उि बोंद की अिवध के दौरान पूणय वनरीिण वनधायररत
वकया जा सके ।[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 631
नोट : जहाों कही ों भी उच्च दबाि (एचपी) बॉयलर और कम दबाि (एलपी) बॉयलर एक ही स्थान से
सोंचावलत होते हैं उस सोंबोंध में उच्च दबाि (एचपी) िाले बॉयलर पर लागू वनरीिण की प्रवहृया
कम दबाि (एलपी) िाले बॉयलर पर भी लागू होगी।632 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पररवशष्ट झ
[विवनयम 295 (8) देखें]
क . विशेर् रूप से वनरंतर प्रवहृया में संयंत्र में उपयोग वकए बीस िर्ष की अिवध तक के (फायर
वकए गए) िेट हीट बॉयलर
(1) विशे रूप से वनरोंतर प्रवहृया में सोंयोंि में उपयोग वकए बीस ि य की अिवध तक के (फायर वकए
गए) िेस्ट हीट बॉयलरो ों का वनरीिण, वनरीिण की तारीख से बारह महीने की समाक्तप्त पर और चौबीस
महीने की समाक्तप्त पर, विवनयम 311 में दी गई प्रवहृया के अनुसार वकया जाएगा और राज्य में सोंबोंवधत
सिम व्यक्ति द्वारा वफटनेस का प्रमाणीकरण जारी वकया जाएगा और उनके विवधित भरे हुये फॉमय IX में
आिेदन के साथ नीचे वदए गए ऑपरेशन ररकॉडय से सोंतुष्ट स होने पर, बारह महीने की एक और अिवध के
वलए सोंचालन की अनुमवत प्रदान की जाएगी: -
(क) डेटा अवधग्रहण प्रणाली (डीएएस) के आउटपुट से सुपरहीटर और रीहीटर तापमान
प्रचालन के वलए ऑपरेशन डेटा या लॉग शीट में बनाए गए तापमान ररकॉडय सुपरहीटर
तापमान प्रचालन के वलए ऑपरेशन डेटा;
(ख) वपछले ि य के दौरान वकए गए बोंद का वििरण उनके कारण और की गई कारयिाई के
साथ;
(ग) ि य के दौरान बॉयलर के दबाि भागो ों पर वकए गए वकसी भी गैर-विनाशकारी परीिण के
ररकॉडय;
(घ) बॉयलर के पानी की गुणित्ता को ऐसे बॉयलरो ों की आिश्यकता के अनुसार बनाए रखा
जाता है गुणित्ता का अवधग्रहण प्रणाली (डीएएस) के द्वारा या सोंयोंि में या पानी के स्रोत पर
बनाए गए पानी की गुणित्ता ररकॉडय लॉगबुक के माध्यम से डेटा उपलब्ध कराया जाता
है;
(ड़) बॉयलर ट्यूब विफलता ररकॉडय (स्थान, मरम्मत/प्रवतस्थावपत ट्यूबो ोंकी सोंख्या)।
(2) विवनयम 311 में वदये गए प्रािधान के अनुसार छत्तीस महीने की समाक्तप्त पर सोंबोंवधत सिम व्यक्ति
द्वारा वनरीिण वकया जाएगा । तथावप, प्रमाणन अिवध समाप्त होने से पहले और प्रमाणन के छह महीने के
बाद वकसी भी समय पोंद्रह वदन या उससे अवधक समय तक के बोंद की क्तस्थवत में, सिम व्यक्ति को
विवधित सूवचत वकया जाएगा तावक उि बोंद की अिवध के दौरान वनरीिण वनधायररत वकया जा सके ।
ख. विशेर् रूप से वनरंतर प्रवहृया में संयंत्र में उपयोग वकए बीस िर्ष की अिवध तक के (वबना
फायर वकए हुए) िेट हीट बॉयलर
(1) विशेर् रूप से वनरंतर प्रवहृया में संयंत्र में उपयोग वकए बीस िर्ष की अिवध तक के (वबना फायर
वकए हुए) िेट हीट बॉयलर के वलए विवनयम 311 में दी गई प्रवहृया और वफटनेस के प्रमाणीकरण
के अनुसार वनरीिण और राज्य में सोंबोंवधत सिम व्यक्ति द्वारा जारी प्रमाणन की तारीख से चौबीस महीने[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 633
की समाक्तप्त पर वनरीिण वकया जाएगा, और पैराग्राफ "क" में सोंचालन ररकॉडय से सोंतुष्ट स होने पर, चौबीस
महीने की एक और अिवध के वलए सोंचालन की अनुमवत दी जाएगी।
(2) जैसा वक विवनयम 311 में प्रािधान है, सोंबोंवधत सिम व्यक्ति द्वारा अड़तालीस महीने की समाक्तप्त पर
वनरीिण वकया जाएगा। तथावप, प्रमाणन अिवध समाप्त होने से पहले और प्रमाणन के छह महीने के बाद
वकसी भी समय पोंद्रह वदन या उससे अवधक समय के बोंद की क्तस्थवत में, सिम व्यक्ति को विवधित सूवचत
वकया जाएगा तावक उि बोंद की अिवध के दौरान वनरीिण वनधायररत वकया जा सके ।
ग. विशेर् रूप से वनरंतर प्रवहृया में संयंत्र में उपयोग वकए बीस िर्ष से अवधक की अिवध के (फायर
वकए गए) िेट हीट बॉयलर
बीस ि य से अवधक की अिवध के बॉयलर विवनयम 311 में वदये गए प्रािधान के अनुसार, वनरीिण में राज्य
के सोंबोंवधत सिम व्यक्ति की सोंतुवष्ट स के अधीन रहना जारी रहेंगे। तथावप, यवद इन विवनयमो ोंके प्रािधानो ों के
अनुसार शे काययशील अिवध मूल्ाोंकन (आरएलए) बायलर पर वकया जाता है और यवद सोंतो जनक
पाया जाता है, तो उपरोि पैरा 'क' में दी गई प्रवहृया का पालन वकया जाएगा।
घ. विशेर् रूप से वनरंतर प्रवहृया में संयंत्र में उपयोग वकए बीस िर्ष से अवधक के अिवध के (वबना
फायर वकए हुए) िेट हीट बॉयलर
बीस ि य से अवधक की अिवध के बॉयलर विवनयम 311 में वदये गए प्रािधान के अनुसार वनरीिण में राज्य
के सोंबोंवधत सिम व्यक्ति की सोंतुवष्ट स के अधीन रहना जारी रहेंगे। तथावप, यवद इन विवनयमो ोंके प्रािधानो ोंके
अनुसार शे काययशील अिवध आकलन (आरएलए) बायलर पर वकया जाता है और यवद सोंतो जनक
पाया जाता है, तो उपरोि पैरा ‘ख’ में दी गई प्रवहृया लागू होगी।634 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पररवशष्ट ञ
I-p सवहत िेल्ड वप्रपेरशन (संशोवधत) ब्यौरो ं के संिुत रूप मैन्यूअल िेल्पल्डंग और नॉमषल
ऑटोमेवटक िेल्पल्डंग के वलए उपयुि है जहां ऑटोमेवटक डीप पेवनटरेशन तकनीकी अपनाई जाती
है, कु छ संशोधन आिश्यक हैं
l वसंगल J बट िेल्ड
िेल्ड का ब्यौरा िेल्पल्डंग मोटाई गैप G कोण ° वत्रज्या r रूट
पोवजशन T (वममी) (वममी) फे स R
(वममी) (वममी)
दोनो ं
ओर
अथिा
वसफष सभी 12.7 से 0 – 10° - 4.8 – 1.6 –
एक ओर पोवजशन अवधक
457.2 20° 9.5 3.2
से िेल्ड
वकया
हुआ
m डबल J बट िेल्ड
िेल्ड का ब्यौरा िेल्पल्डंग मोटाई गैप कोण ° वत्रज्या रूट
पोवजशन T G(वममी) r(वममी) फे स R
(वममी) (वममी)
दोनो ं
ओर से
िेल्ड
वकया सभी 25.4 से 0 – 10° - 4.8 – 1.6 –
हुआ पोवजशन अवधक 457.2 20° 9.5 3.2
n वसंगल बेिलबट िेल्ड
िेल्ड का ब्यौरा िेल्पल्डंग मोटाई T गैप कोण ° रूट
पोवजशन (वममी) G(वममी) फे स R
(वममी)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 635
दोनो ं
ओर
4.8 – 9.5 3.2 – 12.7 45° - 0 – 1.6
अथिा
50°
वसफष सभी
एक पोवजशन
9.5 से 4.8 – 7.9 0 – 1.6
ओर से
अवधक 45° -
िेल्ड
50°
वकया
हुआ
p डबल बेिल बट िेल्ड
िेल्ड का ब्यौरा िेल्पल्डंग मोटाई T गैप कोण ° रूट
पोवजशन (वममी) G(वममी) फे स R
(वममी)
दोनो ं
ओर से
िेल्ड
वकया सभी 12.7 से 4.8 - 7.9 45° - 0 – 1.6
हुआ पोवजशन अवधक 50°
न्यूनतम गैप और न्यूनतम कोण के उपयोग को 10 वममी के अवधकतम वत्रज्या से जोडा जाना
चावहए इसके विपरीत अवधकतम गैप और अवधकतम कोण को 5 वम.मी की न्यूनतम वत्रज्या r से
जोडा जाना चावहए636 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पररवशष्ट ट
विवभन्न गवतविवधयो ंके वलए समय सीमा
हृ. गवतविवध विवनयमन/ समय सीमा प्रावधकरण / व्यक्ति
सों. आईबीआर में
प्रािधान
(1) (2) (3) (4) (5)
1. प्रपि-I (भाग-ख) और प्रपि-I 8(क) (i) बॉयलर घटको ोंके वलए 3 वनरीिण प्रावधकरी
(भाग-ग) में वनमायण और वदन।
(ii) बॉयलर के वलए 7 वदन
परीिण के वलए प्रमाण पि
जारी करना
2. वनमायण के दौरान "प्रपि-I 8(ए)(v) 2 वदन वनरीिण प्रावधकारी
(भाग-ङ)‛ में वनरीिण
प्रावधकरी प्रमाण पि जारी
करना
3. बॉयलर का भाप परीिण 299(1) 30 वदन वनरीिक
4. पोंजीकरण वनरीिण के बाद 300(2) 48 घोंटे वनरीिक
प्रपि X में अनोंवतम आदेश
जारी करना
5. बॉयलर के वलए पोंजीकरण 300 30 वदन मुख्य वनरीिक, बॉयलर
सोंख्या वनवदयष्ट स करना।
6. वनरीिण पुक्तस्तका और 309 15 वदन मुख्य वनरीिक, बॉयलर
पोंजीकरण पुक्तस्तका के ज्ञापन
का हस्ताोंतरण
7. फॉमय-XII में बॉयलर के 310 48 घोंटे सिम व्यक्ति
उपयोग के वलए प्रमाण पि
जारी करना[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 637
8. रेमनेंट लाइफ असेसमेंट 313 से 315 वनरीिण/परीिण पूरा होने प्रवसद् अिशे जीिन
ररपोटय/वसफाररशें जमा करना की तारीख से 30 वदन मूल्ाोंकन सोंगठन
9. बॉयलर और स्टीम पाइप की 316(5) 30 वदन मुख्य वनरीिक, बॉयलर
मरम्मत करने िालो ों की
पहचान
10. बॉयलर में मरम्मत/बदलाि 316(3)(ङ)(ii) 2 वदन मुख्य वनरीिक, बॉयलर
करने की अनुमवत
11 भारत में वनवमयत बॉयलर और 321(1) (i) 20 TPH िमता तक के वनरीिण प्रावधकारी
बॉयलर घटको ों के वलए बॉयलरो ों और बॉयलर
घटको ोंके वलए 5 वदन ।
वडजाइन और विवनमायण
(ii) TPH से अवधक और 100
डरॉइोंग्स को अनुमोदन
TPH तक की िमता िाले
बॉयलर के वलए 15 वदन
(iii) 100 TPH िमता से ज़्यादा
िाले बॉयलरो ों के वलए 21
वदन
12. भारत के बाहर विवनवमयत 321(3) (i) 5 वदन, यवद िही सामग्री तकनीकी सलाहकार,
बॉयलरो ों और बॉयलर घटको ों पहले से अनुमोवदत है और (बॉयलर)
उसी वडजाइन प्रेशर और ताप
के वलए सामग्री का अनुमोदन
के वलए उपयोग हो रहा है।
(ii) अन्य मामलो ोंमें 10 वदन
13. भारत के बाहर विवनवमयत 321(3) 21 वदन मुख्य वनरीिक, बॉयलर
बॉयलरो ों और बॉयलर घटको ों
के वलए वडजाइन और
विवनमायण डरॉइोंग को अनुमोदन
14, सोंतो जनक ररपोटय जमा करने 541 5 वदन सिम प्रावधकारी
के बाद प्रपि-II में िेल्डर
योग्यता प्रमाणपि जारी करना638 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
15. वनमायण/विवनमायण के दौरान पररवशष्ट स क 2 वदन वनरीिण प्रावधकारी/सिम
वनरीिण व्यक्ति
नोट : (1) उपरोि समय सीमा पूणय वििरण/दस्तािेज जमा करने की तारीख से लागू होगी।
(2) वकसी गवतविवध के वलए वनधायररत समय सीमा समाप्त होने के बाद, उस गवतविवध के वलए
अनुमोदन प्रदान वकया गया माना जाएगा[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 639
अनुबंध ठ
संपररितषन तावलका
लंबाई
1 सेंटीमीटर (सेमी) = 10 वममी
1 फु ट (फीट) = 304.8 वममी
1 इोंच (इन) = 25.4 वममी
1 मीटर (एम) = 1000 वममी
1 वमलीमीटर (वममी) = 1 वममी
1 याडय (yd) = 914.4 वममी
तापमान
1 ०c = 1 ०c
1 ०c = 5/9 [ ०F- 32]
1 ०c = [ ०K -273.15]
कोण
1 वडग्री ( º ) = 1 वडग्री ( º )
1 रेवडयन (रेड) = 57.2958०
1 वमनट (') = 0.0166०
1 सेकें ड ('') = 0.0002०
दबाि
1 एटटमोस्फीयर = 1.033227 वकग्रा/सेमी 2 (जी)
1 बार = 1.019716 वकग्रा/सेमी 2 (जी)
1 वकग्रा/सेमी 2 = 14.223 पीएसआई
1 एमपीए = 10.19716 वकग्रा/सेमी 2 (जी)
1 एलबीएस/फीट 2 = 0.000488 वकग्रा/सेमी 2 (जी)
1 एलबीएस/इोंच 2 = 0.07030696 वकग्रा/सेमी 2 (जी)
1 टन/फीट 2 = 0.9764855 वकग्रा/सेमी 2 (जी)
1 टन/इोंच 2 = 140.6139 वकग्रा/सेमी 2 (जी)
बल
1kgf = 9.80665 एन
नोट: मानो ोंको वनकटतम एक दशमलि वबोंदु तक पूणािंवकत वकया जाएगा।
[फा. सं.पी-30014/3/2021- बॉयलर]
सोंदीप सदानोंद कु म्भार, सवचि640 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
MINISTRY OF COMMERCE AND INDUSTRY
(Department for Promotion of Industry and Internal Trade)
(CENTRAL BOILERS BOARD)
NOTIFICATION
New Delhi, the 14th January, 2026
G.S.R. 31(E).—In exercise of the powers conferred by section 40 of the Boilers Act,
2025 (12 of 2025), and in supersession of the Indian Boiler Regulations, 1950, except as respects
thing done or omitted to be done before such supersession, the following draft regulations, which
the Central Boilers Board proposes to make is hereby published as required under sub-section (1)
of section 40 of the said Act for the information of all persons likely to be affected thereby and
notice is hereby given that the said draft regulations will be taken into consideration after expiry
of a period of thirty days from the date the Gazette containing the publication of this notification
is made available to the public;
Any objections or suggestions which may be received from any person with respect to
the said draft regulations within the period so specified will be considered by the Central Boilers
Board;
Objections or suggestions, if any, may be addressed to the Secretary, Central Boilers
Board, Ministry of Commerce and Industry (Department for Promotion of Industry and Internal
Trade), Room No. 126A, UdyogBhawan, New Delhi- 110 011 or sent by email
(sandeep.kumbhar7@gov.in) within the period specified above.
DRAFT REGULATIONS
PRELIMINARY
1. Short title, application and commencement. ─ (1) These regulations may be called the
Indian Boiler Regulations, 2026.
(2) These regulations shall apply to all boilers including those working on the principles of
natural circulations, forced circulation and forced flow with no fixed steam and water line.
(3) They shall come into force on the date of their publication in the Official Gazette.
2. Definitions.─(1) In these regulations, unless the context otherwise requires,-[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 641
(a) ―Act‖ means the Boilers Act, 2025 (12 of 2025);
(b) ―Appraisal Committee‖ means a Committee constituted by the Central Boilers Board
to evaluate the performance of a firm or a company applying for recognition as
Inspecting Authority;
(c) ―Central Boilers Board Examination Standing Committee‖ means a Committee
constituted by the Central Boilers Board to conduct examination for recognition of
competent persons;
(d) ―design pressure of boiler‖,-
(i) in relation to a natural or assisted circulation boiler, means the maximum
allowable working pressure in the steam drum of the boiler;
(ii) in relation to a once through forced-circulation boiler, means the maximum
allowable working pressure at the final superheater steam outlet;
(e) ―design temperature‖,-
(i) for unheated components, means, the fluid temperature inside the
component, under operation;
(ii) for heated components, means, the fluid temperature inside the component
under sustained conditions increased by specified code allowances;
(f) ―Evaluation Committee‖ means a committee constituted by the Central Government
to evaluate the performance of firm or a company applying for recognition as
competent authority, well-known materialtesting laboratory, well-known steel maker,
well-known foundry or forge, well-known tube or pipe maker and well-known remnant
life assessment organisation;
(g) ―firm‖ means a firm and includes a company;
(h) ―form‖ means a form appended to these regulations;
(i) ―maximum allowable working pressure‖ means the design pressure of any part,
adjusted to take into account the pressure drop and hydraulic head;
(j) ―pipe‖ means the cylindrical hollow parts, other than tube, drum or header with a
design intent to carry a flow of steam or water or water-steam mixture during normal
operation, including those that carry intermittent flow, such as drain pipes;
The expression ‗pipe‘ implies that there is no design intent to effect heat transfer
through the wall of the pressure part;642 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(k) ―tube‖ meansa tubular pressure part that is either exposed over much of its length
to hot gases for purposes of heat transfer, or is directly butt welded to such a
tubular pressure part including a tube stub on a drum or header.
(2) Words and expressions used herein and not defined but defined is the Act or the rules
made there-under shall have the meanings respectively assigned to them in that Act or
the rules.
CHAPTER-1
3. General requirements, application of standard conditions and exception
thereto.─
(1) No boiler shall be registered under sub-section (5) of section 12 of the Act and no
certificate shall be issued under sub-section (6) of that section with reference to a boiler,
unless the standard conditions in respect of material, design and construction, specified in
the subsequent chapters of these regulations, are satisfied in respect of such a boiler.
(2) Notwithstanding anything in sub-regulation (1), the Chief Inspector may, subject to the
provisions of regulation 29, register a boiler and issue a certificate authorising the use
thereof, under any of the following circumstances, namely:-
(a) when the material used in the construction of a boiler, steam-pipe, economiser or
superheater is not in conformity with theseregulations but used in other countries
as being suitable for use in the construction of boilers and steam-pipes, provided
that such material is not specifically prohibited by these regulations and that the
methods of manufacture, fabrication and heat treatment conform to the specified
Codes or Standards;
(b) when the constructional features of a boiler, steam-pipe, economiser or
superheater are not in conformity with these regulations but are not considered
by the Board to be inferior in strength to those prescribed in these regulations
and form part of the usual manufacturing practice of boilers and steam-pipes in
other countries;
(c) when a boiler, steam-pipe, economiser or superheater has been built in
conformity with these regulations but no certificate as required under the
regulations is forthcoming;
(3) No structural part of a boiler, which is subject to pressure, shall be made of Bessemer
process steel or of Cast or Malleable Cast Iron.
(4) Where no specific provision is made in these regulations for design or manufacture of
any pressure part, the Inspecting Authority may permit the design, manufacture, stage
inspections and certification of such pressure parts including the valves; mountings and[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 643
fittings conforming to the Codes or Standards like British Standards (BS), European
Standards (EN), American Society of Mechanical Engineers (ASME) Boiler and Pressure
Vessel Code, Tubular Exchanger Manufacturers Association (TEMA), Technical
Requirements Document (TRD), GOST and Japanese Industrial Standards (JIS), which
are known to be commonly used in industrially advanced countries and the decision of
Inspecting Authorities shall be binding on all Registering Authorities.
(5) The tubes of boilers and heat exchangers made of titanium and other exotic metals may
be approved as per international codes, including American Society of Mechanical
Engineers (ASME), British Standards (BS), European Standards (EN), DIN, Tubular
Exchanger Manufacturers Association (TEMA)with the minimum thickness specified in
those codes of manufacture.
4. Inspectionof boiler to comply into any foreign code.─Notwithstanding anything
contained in these regulations, the inspecting authority may inspect any boiler meant for
export during the various stages of its construction so as to comply with the requirements of
any foreign code and may grant a certificate in Part-A of Form-I.
5. Exemption of boiler or boiler components.─Under sub-section (4) of section 38 of the Act,
any boiler or boiler component may be exempted in the whole or any part of the State from
the operation of all or any of the provisions of the Act, subject to the following conditions,
namely:-
(1) Design and construction of boiler or boiler component is in accordance with
international code or standard including British Standards (BS), European
Standards (EN), American Society of Mechanical Engineers (ASME) Boiler and
Pressure Vessel Code, Tubular Exchanger Manufacturers Association (TEMA),
Technical Requirements Document (TRD), GOST and Japanese Industrial
Standards (JIS);
(2) Materials used in the construction are not specifically prohibited under these
regulations;
(3) Design, construction and materials of boiler or boiler components are satisfied by
the State Governments by necessary tests and examination like Remnant Life
Assessment, which shall be carried out by the owner.
6.Fee not prescribed in regulations. For any activity, which in the opinion of a State
Government involves time and labour and for which no fee has been prescribed in these
regulations, may be prescribed by the State Government.
7. Standard requirements:-
(1) The construction of boilers shall comply with the following requirements, namely:-
(a) Material – All plates and bars used in the construction of boilers shall be tested
and found to conform with the regulations hereinafter contained.
(b) Manufacture –
(i) All boilers during construction shall be under the supervision of a Competent
Person and shall be inspected at all stages of construction as specified in
Appendix-A.644 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ii) Tubes and steam-pipes shall also be inspected at the makers‘ works at the
stages as specified in Appendix-A, and the tests conducted by the makers
shall also be witnessed by the Competent Person;
(iii) the welders engaged in welding of boilers, boiler components, economisers, feed
pipes, steam-pipes and super-heaters shall possess certificate in Form-II;
(iv) boilers shall be manufactured by a boiler manufacturer of appropriate class;
(v) any firm seeking recognition shall apply to an Inspecting Authority operating in the
State in which the recognition is sought in questionnaire ‗Form-III‘ alongwith the following
fee:
SI.No. Class of manufacturer Fee for recognition Fee for renewal of
(Rs.) recognition (Rs.)
(1) (2) (3) (4)
(i) Special Class 20,000/- 10,000/-
(ii) Class I 15,000/- 7,500/-
(iii) Class II 10,000/- 5,000/-
(iv) Class III 7,500/- 3,750/-
(v) Class IV 5,000/- 2,500/-
(vi) Boiler Component 5,000/- 2,500/-
(2) A firm seeking recognition as a manufacturer shall meet the following requirements
depending upon the class of boilers, namely:-
(a) Special class boiler manufacturerfor manufacture of boilers of any type and
capacity.─ A special class boiler manufacturer shall have minimum covered area of 7500
Sq. Meters for manufacturing facilities and shall have following design, fabrication and
testing facilities:-
(i) Machinery, tools and equipment:
(A) Mandatory: SAW welding machine for seam welding, TIG welding machine, panel
bending machine, welding and grinding equipment, radial drilling machine,
chamfering machine, tube bending machine, tube swaging machine, burners for
pre-heating and post heating, heat treatment facilities, hydraulic test pump ( upto
500 Kgs./Cm² or above), band saw cutting machine, air compressor, measuring
tools.
(B) Optional: Plate bending or rolling machine of appropriate thickness, tube
expander, dished end making machine.
(ii) Quality assurance and testing facilities:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 645
Magnetic Particle Inspection(MPI), Liquid PenetrantInspection(LPI), Positive
Material Identification (PMI) facilities, Universal Testing Machine (UTM),
Radiographic Testing (RT), Ultrasonic Testing (UT).
(iii) Manpower:
(A) Graduate Engineers in relevant discipline with minimum five years experience in
the field of boilers, engineers with experience in erection, commissioning and
supervision, Non Destructive Testing(NDT) personnel with Level-III NDT
Certificates from I.S.N.T. or A.S.N.T., and IBR certified welders of appropriate
class.
(B) Manufacturer shall provide in-house facilities for training of engineers, technicians
and weldersand shall have in house Research and Development (R&D) facilities or
tie up for R&D.
Note:1. Manufacturers need not have manufacturing facilities for manufacture of
dished ends, pumps andfittings if they outsource manufacturing of these
items .
2. Based on the functional requirement manufacturing of any boiler part or
component may be outsourced to an approved manufacturer.
3. Rolling and Edge preparation process may be outsourced and
manufactures need not have manufacturing facilities for the same.
4. Design office may be located within any of their manufacturing facilities
or outside the manufacturing facilities .
(b) Class-I boiler manufacturer for manufacture of boilers of working pressure upto 180
Kgs./Cm².─ A class-I boiler manufacturer shall have minimum covered area of 5000
Sq. Meters for manufacturing facilities and shall have following design, fabrication and
testing facilities:
(i) Machinery, tools and equipment:
(A) Mandatory: SAW welding machine for seam welding, TIG welding machine,
panel bending machine, welding and grindingequipments, radial drilling machine,
chamfering machine, tube bending machine, tube swaging machine, burners for pre-
heating and post heating, heat treatment facilities, hydraulic test pump (upto 300
Kgs./Cm² or above), band saw cutting machine, air compressor, measuring tools.
(B) Optional: Plate bending or rolling machine of appropriate thickness, tube
expander, dished end making machine.
(ii) Quality assurance and testing facilities:
Mandatory: Magnetic Particle Inspection(MPI), Liquid PenetrantInspection(LPI),
Positive Material Identification (PMI) facilities, Universal Testing Machine (UTM),
Radiographic Testing (RT), Ultrasonic Testing (UT).
(iii) Manpower:
(A) Graduate Engineers in relevant discipline with a minimum of four years
experience in the field of boilers, engineers with erection, commissioning and646 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
supervision experience, NDT personnel with Level-II NDT Certificates from I.S.N.T.
or A.S.N.T., and IBR certified welders of appropriate class.
(B) Manufacturer shall provide in-house facilities for training of engineers,
technicians and welders.
Note: 1. Manufacturers need not have manufacturing facilities for manufacture of
Dished Ends, Pumps and Fittings which may be outsourced.
2. Based on the functional requirement manufacturing of any boiler part or
component maybe outsourced to an approved manufacturer.
3. Rolling and Edge preparation process may be outsourced and manufactures
need not have manufacturing facilities for the same.
4. Design office may be located within any of their manufacturing facilities or
outside the manufacturing facilities .
(c) Class-II Boiler manufacturer for manufacture of boilers of working pressure upto 120
Kgs./Cm².─ A class-II boiler manufacturer shall have minimum covered area of
3000 Sq. Meters for manufacturing facilities and shall have following design,
fabrication and testing facilities:
(i) Machinery, tools and equipment:
(A) Mandatory: SAW welding machine for seam welding, TIG welding machine,
welding and grindingequipments, radial drilling machine, chamfering machine,
tube bending machine, burners for pre-heating and post heating, heat treatment
facilities, hydraulic test pump ( upto 200 Kgs./Cm² or above), band saw cutting
machine, air compressor, measuring tools.
(B) Optional:Plate bending or rolling machine of appropriate thickness, panel
bending machine, tube expander, dished end making machine, tube swaging
machine.
(ii) Quality assurance and testing facilities:
(A) Mandatory: Magnetic Particle Inspection (MPI), Liquid PenetrantInspection(LPI)
(B) Optional: Universal Testing Machine (UTM), Radiographic Testing (RT),
Ultrasonic Testing (UT)
(iii) Manpower:
Graduate or Diploma engineers in relevant discipline with a minimum of three
years experience in the field of boilers for graduate engineers and five years
for diploma Engineer‘, NDT personnel with Level-II NDT Certificates from
I.S.N.T. or A.S.N.T., and IBR certified welders of appropriate class.
Note: 1. Manufacturers need not have manufacturing facilities for manufacture of
Dished Ends, Pumps and Fittings which may be outsourced.
2.Based on the functional requirement manufacturing of any boiler part or
component may be outsourced to an approved manufacturer.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 647
3. Rolling and Edge preparation process may be outsourced and manufactures
need not have manufacturing facilities for the same.
4. Design office may be located within any of their manufacturing facilities or
outside the manufacturing facilities .
(d) Class-III Boiler manufacturer for manufacture of boilers of working pressure upto 50
Kgs./Cm².─ A Class-III Boiler manufacturer shall have minimum covered area of 1500
Sq. Meters for manufacturing facilities and shall have following design, fabrication and
testing facilities:
(i) Machinery, tools and equipment:
(A) Mandatory: Plate bending or rolling machine of appropriate thickness, TIG
welding machine, welding and grinding equipments, radial drilling machine,
chamfering machine, tube bending machine, burners for pre-heating and post
heating, heat treatment facilities, hydraulic test pump ( upto 100 Kgs./Cm² or
above), band saw cutting machine, air compressor, measuring tools.
(B) Optional:SAW Welding machine for seam welding, panel bending machine, tube
expander, dished end making machine, tube swaging machine.
(ii) Quality assurance and testing facilities:
(A) Mandatory: Magnetic Particle Inspection (MPI), Liquid PenetrantInspection(LPI)
(B) Optional:Universal Testing Machine (UTM), Radiographic Testing (RT),
Ultrasonic Testing (UT)
(iii) Manpower:
Graduate or Diploma Engineers in relevant discipline with a minimum of two
years experience in the field of boilers for graduate engineers and four years
for diploma engineers, NDT personnel with Level-II NDT Certificates from
I.S.N.T. or A.S.N.T., and IBR certified welders of appropriate class.
Note: 1. Manufacturers need not have manufacturing facilities for manufacture of
Dished Ends, Pumps and Fittings which may be outsourced.
2.Based on the functional requirement manufacturing of any boiler part or
component may be outsourced to an approved manufacturer.
3. Rolling and Edge preparation process may be outsourced and manufactures
need not have manufacturing facilities for the same.
4. Design office may be located within any of their manufacturing facilities or
outside the manufacturing facilities.
(e) Class-IV Boiler manufacturer for manufacture of boilers of working pressure upto 17.5
Kgs./Cm².─A class-IV boiler manufacturer shall have adequate covered area for
manufacturing facilities and shall have following design, fabrication and testing
facilities:
(i) Machinery, tools and equipment:648 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Mandatory: Plate bending or rolling machine of appropriate thickness, radial
drilling machine. welding and grindingequipments, hydraulic test pump ( upto 50
Kgs./Cm² or above), tube expander, lathe machine, power hacksaw, drill
machine, measuring tools .
(ii) Manpower:
Graduate or Diploma Engineers in relevant discipline with a minimum of one
year experience in the field of boilers for graduate engineers and three years
for diploma engineers and IBR certified welders of appropriate class.
Note: 1.Manufacturers need not have manufacturing facilities for manufacture of
Dished Ends, Pumps and Fittings which may be outsourced.
2. Based on the functional requirement manufacturing of any boiler part or
component may be outsourced to an approved manufacturer.
3. Heat Treatment, NDT and mechanical testings may be outsourced.
4. Design office may be located within any of their manufacturing facilities or
outside the manufacturing facilities.
(f) Boiler component manufacturer: A boiler component manufacturer shall have adequate
covered area for manufacturing facilities and have adequate design and fabrication facilities
for the boiler components which they intend to manufacture. In case boiler component is to be
manufactured as per the design of boiler manufacturer, design facilities may not be required.
Note: 1. A higher class boiler manufacturer shall be eligible to manufacture lower class boilers.
2. A boiler manufacturer shall also be eligible to manufacture boiler components as
boiler component manufacturer.
(3)The Inspecting Authority shall scrutinise and evaluate the application along with the replies
to the questionnaire and after satisfying itself that the requirements under sub-
regulation (2) are fulfilled, shall recognise the firm as a manufacturer in the category
applied for.
(4) The recognition of the firm as a manufacturer shall be for a period of three years and the
firm may apply for renewal of their recognition at least ninety days before the expiry of
said period.
8. Certificates, drawings and specifications- In advance or along with an application for
registration of a boiler under sub-section (1) of section 12 and clause (c) of sub-section (1) of
section 19 of the Act, the following certificates and drawings or specifications shall be furnished
to the Chief Inspector (certificates and drawings or specificationsmay also be submitted through
electronic means along with digital signatures), namely:-
(a) (i) A certificate in Form-I(Part-B) or Form-I(Part-C), as the case may be, from an
Inspecting Authority, certifying that the material was tested and the boiler was built under[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 649
their supervision in respect of the inspection of the boiler during construction and the
hydraulic test applied on completion.
(ii) In case of a boiler which is to be assembled only at site, requirement of the hydraulic
test on a completely assembled boiler by the Inspecting Authority shall not apply
provided that the individual parts of such boiler have been hydraulically tested and
certified by the Inspecting Authority separately as required under these regulations.
(iii) In case of Waste Heat Boilers, a certificate in Form-I(Part-B) or Form-I(Part-C) as
applicable may be issued by the Inspecting Authority of the State, where the boiler is
installed, after completion of construction at site on the strength of the certificates
supplied to him in prescribed forms by the owners for the individual components which
are required to be furnished for registration of a boiler under thisregulation, shall be
submitted to the Inspecting Authority of the State, where the boiler is installed, before the
commencement of construction of such boiler at the site.
(iv)The Inspecting Authority may grant a certificate in Form-I(Part-D) in lieu of Form-
I(Part-B) or Form-I(Part-C) as the case may be, for boilers for which variations from the
standard conditions in respect of material, design and construction features permitted by
the Board or the Inspecting Authority.
(v) The Inspecting Authority shall issue certificate in Form-I(Part-E)after completion of
boiler erection and satisfactory hydrostatic test at the assembly site.
(b) A certificate in Form-IV(Part-A)of manufacture and test signed by the maker of the boiler
or its representative, containing a description of the boiler, its principal dimensions,
particulars of the kind of material used in its construction, the thickness of all plates,
particulars of any departure from ordinary practice in making the shell, such as, solid
rolling or welding, the hydraulic test to which the boiler was subjected, the intended
working pressure, the area of heating surface, the maximum continuous evaporative
capacity, the year and place of manufacture, and the works number of the boiler.
Note: The Inspecting Authority mayapprove a modified form of certificate omitting
items which do not pertain to a particular boiler.
(c) (i) In case of shop assembled boilers, drawings to an appropriate scale showing the
principal dimensions, sections, Maker‘s number, position of Inspecting Authority‘s stamp,
bill of material, welding details and design parameters.
(ii) In case of site assembled boilers, drawings showing general and pressure parts
arrangement, drawings of coils, panels, headers and drums with details of principal
dimensions, bill of materials and design parameters. Manufacturer may use appropriate
scale for drawings and in case of identical or similar multiple sub-assemblies, drawings
for only one sub-assembly may be submitted.
(d) (i) A certificate inForm-V(Part-A) from the steel maker and a certificate from the maker
of the plates or bars, of the nature referred to in regulations 45 and 46 respectively and
the certificate from the maker of the plates, or bars, shall show the charge numbers, the650 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
plate or bar numbers and the number and dimensions of the various plates tested, their
chemical analysis, their ultimate tensile strength in kilograms per square millimetre of
section, the percentage of elongation and the length on which measured, the number,
kind and result of bend or other tests made and the date of tests .
(ii) In case any question arises in respect of the fitness of the boilers for the working
pressure approved by the Inspecting Authority within a period of three years from the
date of their registration, the owner shall if requested by the Chief Inspector obtain and
furnish the original documents specified in the said clauses:
Provided that in respect of the steel made and tested by Well-known steel
makers recognised by the Central Boilers Board in the manner laid down in
regulations 17 to 23, a certificate of Well-known steel maker in Form-V(Part-A) shall
be accepted in lieu of a certificate from an Inspection Authority.
(iii) In case where the original certificate from well-known steel makers in Form-V(Part-A)
is not produceable, owing to such certificate containing details of plates used for other
purposes also, an extract from the original certificate duly signed by the makers of the
boiler and countersigned by the Inspecting Authority shall be accepted in lieu of the
certificate in Form-V(Part-A) , provided all information required in Form-V(Part-A) are
furnished in the extract.
(iv) The extract of all test certificates of materials used in boiler and boiler components in
Form-V(Part-B) along with Form-IV(Part-A).
(v) In the case of fusion welded drums, diagram of weld repairs and temperature charts
of heat-treatment shall also be furnished.
(vi) Alloy steel materials used in creep range in furnace or super-heater zone─
(A) two numbers of 1000 hour stress rupture tests shall be carried out at
50°C above the maximum service temperature for each grade of alloy steel
and Nickel alloys; when used in furnace or in super heater zone;
(B) the stress to cause rupture in 1000 hours at above temperatures may be
taken from the master curve corresponding to - 20 percent lineat this stress,
a minimum rupture life of 1000 hours is expected and both the samples shall
pass 1000 hour tests at the above stress and temperature;
(C) the short-term stress rupture tests for 1000 hours as mentioned above
are carried out by National Metallurgical Laboratory or well known steel
makers or any other Material Testing Laboratory recognised by the Central
Boilers Board for creep testing and collecting elevated temperature data of
alloy steel produced indigenously or from a nationally recognised or
accredited testing laboratory for creep testing in that country of manufacture
for alloy steel produced outside India, for the purpose of checking whether
the steel is up to the specification and also to ensure that the steel is capable
of meeting the long-term rupture stress values or maximum allowable stress
values given in American Society of Mechanical Engineers (ASME) or British
Standards (BS) or European Standards (EN) Code, as the case may be, and[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 651
a certificate is given to this effect; alternately the testing can also be done in
any other laboratory if the tests are witnessed by a Competent Person
working with a recognised Inspecting Authority;
(D) these samples may be selected at random by the Competent Person and
may be in the form of semi-finished products, say, forged bars of about 25
mm2 which shall undergo heat treatment as prescribed by the relevant
specifications.
(vii) For such boilers having a capacity of 20 tons per hour and above which are
required to be assemble at site, the mountings may be supplied separately and
all boilers of capacity less than 20 tons per hour shall carry all the mountings or
fittings certificates in respective forms with details mentioned in Form-IV(Part-A),
issued at the time of manufacture of boilers.
9. Maker’s stamp.─The boiler shall have stamp in a conspicuous place such as-
MAKER’S NAME ------------------------------------------------------------------------------------------
Work‘s Number----------------Year of Make ------------------- Tested to ---------------------
kg/cm2(g) on ----------------- Design pressure ----------------- kg/cm2(g)
Competent Person‘s or
Inspecting Authority‘s Official Stamp
10. Certificates for Pipes.─A certificate of manufacture and test in Form-IV(Part-B) signed by
the maker and the Inspecting Authority shall be furnished and well-known pipe makers
may also furnish digitally signed on-line certificate of manufacture and test in Form-
IV(Part-B) through electronic mode along with digital signature.
11. Certificates for tubes.─A certificate of manufacture and test in Form-IV(Part-C), signed
by the maker and the Inspecting Authority shall be furnished and well-known tube
makers may also furnish certificate of manufacture and test in Form-IV(Part-C) through
electronic mode along with digital signature.
Note: In case of pipes or tubes made by well-known Pipe or Tube Makers recognised
by the Central Boilers Board in the manner as laid down in regulations 17 to 23in India or
other countries, material testing including mechanical tests may be carried out by them
and the particulars regarding testing of material including mechanical tests as certified
by them and the particulars appropriate column or paragraphs in the certificate inForm-
IV(Part-B), or Form-IV(Part-C), and in case, certificate from the ―well-known Pipe or
Tube Makers‖ as aforesaid is produced, such certificate may be accepted in lieu of the652 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
certificate from the Inspecting Authority insofar as it relates to testing of material
including mechanical tests specified in this form.
12. Certificates for mounting and fittings.─A certificate of manufacture and test in Form-
IV(Part-D), signed by the maker and the Inspecting Authority in respect of boiler
mountings and steam-pipe fittings during manufacture, shall be furnished.
Note: A Photocopy of certificate in Form-IV(Part-D)shall be accepted provided it is
endorsed by the manufacturer or the Inspecting Authority who has signed the original
certificate.
13. Certificate for Castings.─A certificate of manufacture and test in Form-IV(Part-E), signed
by the maker and the Inspecting Authority shall be furnished. However, in the case of
castings manufactured by well knownfoundries recognised by the Central Boilers Board,
signature of Inspecting Authority shall not be required.
14. Certificate for Forgings.─ A certificate of manufacture and test in Form-IV(Part-F), signed
by the maker and the Inspecting Authority shall be furnished. However, in the case of
forgings manufactured by well known forges recognised by the Central Boilers Board,
signature of Inspecting Authority shall not be required.
15.Certificate of inspection during manufacture of Headers, Desuperheaters or Attemperator,
Blowdown Tank, Feedwater Tanks, Accumulator and Dearator.─A certificate of
manufacture and test in Form-IV(Part-G), signed by the maker and the Inspecting Authority
shall be furnished.
16.Certificate of inspection during manufacture of dished ends or end covers.─ A certificate of
manufacture and test in Form-IV(Part-H), signed by the maker and the Inspecting Authority
shall be furnished.
17. Application for recognition.─(1) An application for recognition as Competent Authority,
Inspecting Authority, Well-known Material Testing Laboratory, Well-known Steel Maker, Well-
known Foundry or Forge, Well-known Tube or Pipe Maker and Well-known Remnant Life
Assessment Organisation, in one of the area of activity in which they are engaged, shall be
made by a firm to the Secretary, Central Boilers Board, alongwith specified fee.
(2) Application under sub-regulation (1) shall be made in duly filled in Forms VI(Part-A)
to VI(Part-G)applicable to the area of activity and may also be submitted through electronic
means .
(3) Any firm applying for recognition as Competent Authority and Inspecting Authority
under sub-regulation (1) shall have a minimum experience of two years in the area of activity for
which recognition is applied for and for recognition as Well-known Material Testing Laboratory
or Well-known Steel Maker or Well-Known Foundry or Forge, Well-Known Tube or Pipe Maker[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 653
or Well-Known Remnant Life Assessment Organisation, experience of two years shall be
required under these regulations.
(4) In case of firms in foreign countries seeking recognition as Competent Authority or
Well-Known Steel Maker, Well Known Pipe or Tube Maker, Well Known Foundry or Forge, a fee
of ten thousand US dollars shall be deposited along with the completed form to meet the
expenses of the visit of the Evaluation Committee specified under regulation 23:
Provided that where the firm has more than one manufacturing unit in the same country,
an additional fee at the rate of two thousand US dollarsper additional unit shall be deposited.
(5) In case of firms in foreign countries seeking recognition as Inspecting Authority, a fee
of one thousand US dollars shall be deposited along with the completed forms.
(6) In case of firms in India seeking recognition under sub-regulation (1), a fee of rupees
fifteen thousand shall be deposited along with the completed form and for renewal of
recognition, a fee of rupees ten thousand shall be deposited along with the completed form.
(7) The Evaluation Committee shall carry out the evaluation of the manufacturing works
of the firms within ninety days of receipt of the fees in case of manufacturing works in foreign
countries and within sixty days in case of manufacturing works in India.
(8) Appraisal Committee or Evaluation Committee, as the case may be, shall also
evaluate the performance of firm applying for recognition as Competent Authority or Inspecting
Authority within sixty days of receipt of fee.
(9) The certificate of recognition shall be valid for a period of five years from the date of
visit of the plant by the Evaluation Committee or meeting of Appraisal Committee, as the case
may be and in case of renewal of the recognition, if an application is received for renewal along
with the required fee, firm‘s certificate of recognition may be renewed after following the
procedure specified under these regulations and the certificate shall be issued for a further
period of five years.
18.Scrutiny of applications by Evaluation Committee or Appraisal Committee.─(1) The
Secretary, Central Boilers Board shall forward all the applications except that for recognition as
Inspecting Authority received under sub-regulation (1) of regulation 17, along with replies to the
questionnaire form under sub-regulation (2) of that regulation, to the Evaluation Committee.
(2) For recognition as Inspecting Authority all the applications along with replies to the
questionnaire shall be forwarded to the Appraisal Committee.
(3) The Evaluation Committee or the Appraisal Committee, as the case may be, shall
examine all the applications and replies to the Questionnaire specified under sub-regulation (1)
and—654 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(a) where the application is for recognition as Inspecting Authority, the Appraisal
Committee, may.─
(i) call any of the applicants if it considers necessary, to appear before it to give
clarification for additional information that may be required by the said Committee;
(ii) visit any of the applicant firms on a specific request in writing from such firm or if
decided so by the Appraisal Committee to evaluate the performance of the said firm and
for this purpose the Appraisal Committee may depute three members to visit the
applicant firm;
(b) where the applications are for recognition as Competent Authority or Well Known
Material Testing Laboratory, Well Known Remnant Life Assessment Organisation, Well
Known Steel Maker, Well Known Foundry or Forge or Well Known Tube or Pipe Maker,
the Evaluation Committee shall inspect the laboratories of such Material Testing
Laboratory and Remnant Life Assessment Organisation or the factories of such steel
makers, foundry or forge and tube or pipe makers, where the testing and manufacturing
activities are being carried out in order to evaluate the performance quality of the tests
conducted and products manufactured.
(4) The Evaluation Committee or the Appraisal Committee, as the case may be, after
satisfying itself that the requirements specified in regulations 23 and24 are fulfilled, shall submit
a report to the Secretary, Central Boiler Board recommending either to grant or refuse
recognition.
19. Recognition of a firm as Competent Authority, Inspecting Authorities, Well Known
firms ─On examining the report of the Evaluation Committee or the Appraisal Committee, as
the case may be, the Secretary, Central Boilers Board may issue a certificate of recognition to
the applicant in the applicable Form:
Provided that if he decides to refuse the recognition, he shall inform the applicant
withthe reasons to be recorded in writing.
20. Validity of certificate of recognition:-A certificate of recognition issued under regulation
19, shall be valid for a period of five years.
21. Renewal of certificate of recognition.─(1)A firm may apply for renewal of the certificate
of recognition at least three months before its expiry to the Secretary, Central Boilers Board who
after following the procedure specified in these regulations may renew the certificate of
recognition or refuse renewal and in case of renewal it shall be valid for a further period of five
years.
(2) The period of validity shall be deemed to have been extended till such time the
decision on the renewal is not taken after receipt of the application under sub-regulation (1).
22. Appeal.─(1) Any firm aggrieved with the decision given by the Secretary, Central Boilers
Board may prefer an appeal to the Chairperson, Central Boilers Board.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 655
(2) All applications received by the Chairperson, Central Boilers Board, under sub-regulation (1),
shall be decided by the Chairperson in consultation with Central Boilers Board.
23. Evaluation Committee.─(1)(a)For the purpose of these regulations, the Central
Government constitutes the Evaluation Committee consisting of the following persons, namely:-
(i) Technical Adviser (Boilers) -- Chairperson
(ii) Chief Inspector (Boilers) of the State where the unit is located -- Member
(iii) One representative from Board representing Central Government or Bureau of
Indian Standards or Boiler and boiler component manufacturers or National
Laboratories or Engineering Consultancy agencies or user of boilers and other
interests - Member.
(b) Secretary, Central Boilers Board shall nominate the members;
(2) Functions of Evaluation Committee.─(a)The Evaluation Committee shall evaluate the
performance of a firm applying for recognition in accordance with the provisions of these
regulations, in particular in the following areas, namely:-
(i) Quality System;
(ii) Organisation;
(iii) Review of quality system;
(iv) Documentation--
(A) Inspection and test procedures;
(B) Records;
(C) Technical data;
(v) Inspection equipment;
(vi) Inspection of purchased material or services—
(A) Purchasing;
(B) Purchasing data;
(C) Receiving inspection;
(D) Verification of purchased material;
(vii) In-process inspection;
(viii) Workmanship;
(ix) Inspection and test of completed items;
(x) Sampling procedure;
(xi) Control of non-conforming material;
(xii) Indication of inspection status;656 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(xiii) Protection and preservation of product quality—
(A) material handling;
(B) storage;
(C) delivery;
(xiv) Training.
(b)For recognition as Competent Authority, the Evaluation Committee shall evaluate the
performance of a firm applying for such recognition in accordance with the provisions of these
regulations, in particular in the following areas, namely:-
(i) The firm shall be registered entity and not a sole proprietorship.
(ii) For operation in India, firm shall be registered in India also;
(iii) The authorised signatory responsible to issue certificate to qualified welders on
behalf of the Competent Authority shall be an employee of the Competent Authority
and shall be an engineer with five years‘ experience in the field of welding having a
degree in mechanical or production or metallurgical or welding engineering and
certificate of Level-II in radiography techniques;
(iv) The firm or company shall have a workshop with following facilities, namely: -
(A) electric welding sets for conducting welding of the specimens;
(B) pre-heating facilities;
(C) platforms for welding;
(D) the following in-house testing machines:-
(I) universal testing machine;
(II) Non-Destructive Testing (NDT) – dye penetration tests;
(III) machines for preparation of specimens;
(IV) hardness tester (optional);
(E) Radiography, (micro and macro examination of samples) may be outsourced to
approved agencies.
(F) For operation in India, workshop with above facilities shall be required to be
available in India also;
(v) The firm shall be familiar with the requirement for examination of welders under
these regulations;
(vi) An inspecting Authority may also work as a Competent Authority for in-house
certification of welders and for this purpose it may avail the facility of an outside[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 657
agency having above facilities for testing of weld specimens for in-house certification
of welders, provided it has in-employment an authorised signatory as mentioned in
sub-clause (iii) above.
(c) For recognition as Remnant Life Assessment Organisation(RLAO), the Evaluation
Committee shall evaluate the performance of a firm applying for recognition as RLAO in
accordance with the provisions of these regulations, in particular in the following areas,
namely:-
i. For undertaking Remnant Life Assessment (RLA) of boilers operating above 120
Kg/Cm² pressure―
(A) Knowledge on boiler design, manufacturing and field knowledge on operation
and maintenance of boilers, materials, codes and standards;
(B) Expertise in failure analysis, stress analysis to evaluate pressure part
component life;
(C) Expertise on metallurgy, NDT and other RLA assessment techniques;
(D) Internal Oxide Thickness (IOT) measurement and analytical capabilities;
(E) Firm or company shall have, ―
(I) National Accreditation Board for Testing and Calibration Laboratories
(NABL) accredited laboratory with experts in the field and necessary equipment
or instruments for testing of sample tubes, deposits;
(II) Laboratory with experts for analysis of Water Wall (WW) deposits and
solvent selection with a capability to issue guidelines for chemical cleaning of
boilers; (it may also be outsourced);
(III) NDT laboratory with qualified personnel;
(IV) Skilled and experienced manpower for site work to carry out RLA tests as
per regulations 313 to 315;
(V) All measuring and testing instruments required for RLA study of boilers as
stipulated in regulation 313 to 315; and
(VI) Minimum experience of five numbers of RLA studies under Inspecting
Authorities.
ii. For undertaking RLA of boilers operating upto 120 kg/cm² pressure―
(A) Knowledge on boiler design, manufacturing and field knowledge on operation
and maintenance of boilers, materials, codes and standards;
(B) Knowledge in failure analysis, stress analysis to evaluate pressure part
component life;658 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(C) Knowledge on metallurgy, NDT and other RLA assessment techniques;
(D) IOT measurement and analytical capabilities;
(E) Firm shall have―
(I) National Accreditation Board for Testing and Calibration Laboratories
(NABL) accredited laboratory with experts in the field and necessary
equipment or instruments for testing of sample tubes, deposits(It may also
be outsourced);
(II) Laboratory with experts for analysis of water wall (WW) deposits and
solvent selection with a capability to issue guidelines for chemical cleaning
of boilers(It may also be outsourced);
(III) NDT laboratory with qualified personnel;
(IV) Skilled and experienced manpower for site work to carry out RLA tests as
per regulation 313 to 315;
(V) All measuring and testing instruments required for RLA study of boilers as
stipulated in regulation 313 to 315; and
(VI) Minimum experience of five numbers of RLA studies under Inspecting
Authorities.
24. Appraisal Committee.─(1)(a)Composition of Appraisal Committee.─For the purpose of
these regulations, the Central Boilers Board constitutes the Appraisal Committee consisting of
the following persons, namely:-
(i) Technical adviser (Boilers) – Chairperson;
(ii) Five Chief Inspectors or Director of Boilers from States [including Chief
Inspectors or Directors of Boilers of the States in which registered offices of
applicant firm are located] – Members;
(iii) Five Members from Board representing Central Government or Bureau of Indian
Standards or Boiler and boiler component manufacturers or National
Laboratories or Engineering Consultancy agencies or user of boilers and other
interests; - Members
(b) Secretary, Central Boilers Board shall nominate the members;
(2) Functions of Appraisal Committee.─ The Appraisal Committee shall evaluate the
performance of a firm applying for recognition as Inspecting Authority under these
regulations, in the following areas, namely:-
(i) the firm shall be a registered entity and for its operation in India, the entity shall be
registered in India ;[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 659
Explanation. - For the purposes of this regulation, it is hereby declared that the sole
proprietorship firm is not eligible to apply for recognition as Inspecting Authority.
(ii) the firm shall, ─
(a) not be involved in any commercial activity other than the inspection, certification and
related activities under the Indian and International Codes and Standards;
(b) have in-house design and drawing inspection office and for operation in India the in-
house design and drawing inspection office shall be situated in India ;
(c) have various codes in its office and the knowledge of various international codes
along with the Act and these regulations;
(d) have employed the Competent Persons possessing Central Boilers Board
authorisation card for operation in India issued under regulation 25(5)(c)(i);
(e) have a documented quality programme established and maintained to fulfil the
inspection requirements under these regulations;
(f) have complete detailsof each and every Competent Person employed in its
organisation for inspection and certification of boilers;
(g) have a training programme for Competent Persons.
25. Procedure for recognition of Competent Person.─
(1)(a)This regulation provides requirements for the uniform qualification, examination,
issuance and renewal of Central Boiler Board authorisation to act as a competent person for
inspection and certification of boilers and boiler components under the Act during
manufacture, erection, operation and maintenance throughout India.
(2) Minimum qualifications and experience required are as under.─
(a) shall be a graduate in Mechanical Engineering or Production or Power Plant or
Metallurgical Engineering from a recognised institute;
(b) minimum five years experience singly or cumulatively in the following fields related to
boilers:-
(i) Design;
(ii) Manufacture;
(iii) Commissioning;
(iv) Operation and maintenance;
(v) Inspection and certification during manufacture or operation and
maintenance;660 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(vi) High Pressure Welding-Inspection;
(c) Level-II NDT Certificates from Indian Society for Non-Destructive Testing (ISNT) or
American Society for Non-Destructive Testing (ASNT) or any other professional body
recognised by ISNT or ASNT in Non-Destructive methods of testing in radiography and
ultrasonic testing.
(3) Central Boilers Board Examination Standing Committee Composition: -(a)For the
purpose of these regulations, the Central Boilers Board constitutes the ‗Central Boilers
Board Examination Standing Committee‖ consisting of the following persons-
(i) Technical adviser (Boilers) -- Chairperson
(ii) Two Chief Inspectors or Director of Boilers from States -- Members
(iii) Two Members from Board representing Central Government or Bureau of Indian
Standards or Boiler and boiler component manufacturers or National
Laboratories or Engineering Consultancy agencies or user of boilers and other
interests - Members
(b) Secretary, Central Boilers Board shall nominate the members;
(4) The Process for Central Boilers Board Examination shall be as under─
(a)an examination shall be conducted by the Central Boilers Board Examination Standing
Committee or an agency or Regional Examination Standing Committees authorised by
it, as per the following examination methods, namely: -
(i) written examination consisting of design, manufacture, operation and maintenance of
the boiler, Non Destructive Testing Techniques, inspection and certification of boilers
during manufacture and use as per theseregulations( 70% weightage);
(ii) candidate shall be required to secure at least 45% marks in each written examination
papers and at least 60% marks in aggregate to qualify for viva-voce;
(iii) viva-voce on the above (30% weightage );
(iv) candidate shall secure at least 60% marks in aggregate (written exam with 70%
weightage and viva-voce with 30% weightage) in order to pass the examination;
(v) the Central Boilers Board shall issue a passing grade certificate to the candidate
after passing the examination;
(b) application for appearing in the Central Boiler Board Examination shall be made in the
format as provided by the Central Boilers Board Examination Standing Committee at
such place and time as decided by the Central Boilers Board Examination Standing
Committee or an agency or Regional Examination Standing Committees authorised by
it.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 661
(5) The process for Central Boilers Board authorisation shall be as under: ─
(a) the Competent Person shall perform the work without conflict of interest;
(b) an applicant for a Central Boiler Board Authorisation shall meet the following
requirements, namely:-
(i) the applicant shall be in regular employment of, and exclusively engaged by a
Central Boilers Board recognised Inspecting Authority:
Provided that for inspection and certification of boilers during use under
section 13 of the Act, applicant can work independently also without taking
employment with the Central Boilers Board recognised Inspecting Authority ;
(ii) the applicant shall meet the minimum qualification and experience requirements
as referred in sub-regulation (2) of this regulation;
(iii) the applicant shall have taken and passed the Central Boilers Board examination
as referred to in sub-regulation (4) of this regulation;
(iv) the applicant shall apply for an authorisation not later than three years after
passing the Central Boilers Board Examination and a person whose authorisation
has not been issued within the three year period shall be required to take the
Central Boiler Board Examination and receive a passing grade; and
(v) the maximum age for the Competent Person shall be sixty-five years provided the
person is medically fit;
(c) (i) when the applicant meets the requirements as referred to in clause (b)and at the
request of the applicant‘s employer; a Central Boilers Board authorisation card and
a certificate shall be issued:
Provided that the request for authorisation card, only for undertaking
inspection and certification of boilers during use under section 13 of the Act,
may also be made by the applicant;
(ii) the application for an authorisation shall be on forms available with the Central
Boilers Board; and
(iii) a Competent Person may possess only one valid authorisation card;
(d) (i) the validity of an authorisation certificate shall be three years from the date of issue or in
co-terminus with the validity period of recognition of employing Inspecting Authority
(wherever applicable), whichever is earlier;
(ii) for undertaking inspection and certification of boilers during manufacture and
erection, the Competent Person must be in regular employment of the Central Boiler
Board recognised Inspecting Authority failing which the authorisation lapses;
(iii) where the Competent Person leaves the employment, Central Boilers Board
Authorisation Card shall be surrendered by the Inspecting Authority to the Secretary,
Central Boilers Board within a period of seven days from the date of such leave;
(iv) the request for renewal shall be made by Competent Person‘s employer and the request
shall certify that the Competent Person maintained inspection proficiency by performing
or supervising inspection activity and that the individual has met the continuing updation
requirement as laid down in sub-clause (vi):662 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Provided that request for renewal of authorisation, only for undertaking inspection and
certification of boilers during use under section 13 of the Boilers Act, 2025, can also
be made by the Competent Person, giving details of inspections undertaken in the last
three years and confirming that he has met the continuing updation requirement as
given in clause (vi) of this sub-regulation;
(v) on change of employment, a request for authorisation card shall be made by the
Competent Person‘s current employer on forms obtained from the Central Boilers Board;
(vi) each Central Boilers Board authorised Competent Person, at least once every three
years, shall either attend a Central Boilers Board seminar or receive other instruction
related to inspections and the instruction may be in any format, e.g., classroom, home
study, or web-based; the topics may include any subject of relevance to the inspection
process, such as new methods, products, materials, technology or changes to
construction or repair codes;
(vii) a person whose authorisation has not been renewed for five years or less may, on
proper application, have the authorisation reinstated;
(viii) the employer or Competent Person, if working independently, as the case may be,
shall provide verification of continuing updation as mentioned in sub-clause (vi); and
(ix) a person whose authorisation has not been renewed for more than five years shall be
required to qualify the examination conducted by Central Boilers Board ;
(e)
(i) a Central Boilers Board authorisation may be revoked by the Secretary, Central Boilers
Board on the ground of falsification of any statement contained in any application;
(ii) when an evaluation reveals that a Competent Person authorised by Central Boilers Board
is found negligent in his duty or made false statements on forms used for documentation
of his duties, a Central Boilers Board Committee formed for the purpose may examine
the evaluation and recommend to the Secretary, Central Boilers Board, a suitable action
against such Competent Person and the Secretary, Central Boilers Board shall take the
decision;
(iii) if any person is aggrieved by a decision of the Secretary, Central Boilers Board, he may
prefer an appeal against such decision to the Central Boilers Board within thirty days from
the date of communication of the decision;
(iv) the decision of the Central Boilers Board shall be binding; and
(v) any person aggrieved by,-
(A) an order made or purporting to be made by a Competent Person in the exercise of any
power conferred by or under the Act; or[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 663
(B) a refusal of a Competent Person to make any order or to issue any certificate which he is
required or enabled by or under the Act to make or issue ,
may, within thirty days from the date on which such order or refusal is communicated to
him, prefer an appeal against such order or refusal, to the Chief Inspector of Boilers of
the State in which the boiler is located;
(C) fees for each authorisation issued, renewed or reinstated fixed by the Central Boiler
Board examination standing committee shall be paid including through electronic mode.
(6) The Central Boilers Board authorisation number for the purpose of its usage shall be
recorded on all forms used by him and on the items inspected and stamped as a proof
of inspection and the authorisation number shall also be entered into the Competent
Person‘s diary and other relevant records.
(7)(a) A diary shall be maintained by the Competent Person for,-
(i) inspection of construction activities; and
(ii) in-service inspection including repairs and alterations for each location or
siteas per the format laid down by the Central Boilers Board;
(b) the diary shall be bound and numbered and the purpose of the diary shall be to provide
a record of the Competent Person‘s activity and to support the continuity of inspections;
(c) the Competent Person‘s diary shall be the property of the employer Inspecting Authority,
wherever applicable, and shall be available at the location or site of the inspection; and
(d) the diary shall be maintained for a minimum period of five years from the date of last
entry and it may also be maintained in digitised form with provision for online entries:-
(8) Duties and responsibilities of a Competent Person shall include the following, namely:-
(a) on receipt of an application for renewal of certificate for use of a boiler, the
Competent Person shall, within fifteen days from the date of such receipt inspect
the boiler on a date communicated to the owner in advance;
(b) a copy of memorandum of inspection book shall be obtained from the concerned
boiler inspectorate though the Inspecting Authority or directly, if working
independently, for in-service boilers which shall be returned within a period of
sevendays from the date of completion of final inspection for making necessary
entries therein;
(c) the Competent Person shall also discharge the following duties at various stages,
namely:-
(i) Inspection during manufacture and commissioning:-664 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(A) work to the satisfaction of the Inspecting Authority for inspection during
manufacture, erection and commissioning of boilers as per the provisions of
these regulations;
(B) Inspect during manufacture and erection as per the procedure given in
Appendix-A;
(ii) In – service inspection:-
(A) verify whether the stamping or nameplate is legible and represents the item
described on the inspection documentation;
(B) perform external and internal inspection and witness any required pressure
tests;
(C) report the inspection results, including any nonconforming conditions to the
owner of the boilers;
(iii) Repairs and alterations:-
(A) verify that the boiler owner has informed in writing to the chief inspector and the
activity is permitted under the scope of the certificate or the structural alteration,
addition or renewal is made under his supervision;
(B) verify that the boiler repairer has the valid certificate as specified under these
regulations;
(C) monitor the quality control system and verify the system is being implemented
as required by regulations;
(D) verify that all materials comply with these regulations;
(E) verify that all welding procedure specifications, procedure qualification records,
and welder and welding operation records conform to these regulations;
(F) verify that heat treatments as required under these regulations have been
performed and properly documented;
(G) verify that non-destructive examinations and tests as required under these
regulations have been performed and properly documented;
(H) witness pressure tests as required under these regulations;
(I) verify that information in the forms is correct and that the details have been
properly punched;[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 665
(J) verify the correctness of the stamping;
(9) Competent Person or Inspecting Authority may charge a fee for the inspection subject to
the condition that the fee shall not be less than the fee specified by the concerned State.
(10) Inspection shall be carried out as provided under these regulations and the relevant
certificate shall be issued as follows, namely:-
(a) For in-service Boilers inspection: -
(i) one copy shall be given to the owner of boiler on the day of inspection;
(ii) one copy shall be given to Chief Inspector along with the Memorandum of
Inspection Book (Form-XI);
(iii) one copy shall remain in Book.
(iv) In case, inspection is not carried out as provided under these regulations, the
Chief Inspector of Boilers shall report the matter to the Secretary, Central
Boilers Board for appropriate action against the Competent Person which
may include cancellation of his authorisation.
(b) For inspection during manufacture: -
(i) one copy shall be given to the manufacturer;
(ii) one copy shall remain with Inspecting Authority.
(c) For inspection during erection:-
(i) one copy shall be given to the owner of boiler;
(ii) one copy shall be given to Chief Inspector;
(iii) one copy shall remain with Inspecting Authority.
26. Modification of formulae. ─
(1) For determining the maximum allowable working pressure to be allowed on various parts
of boilers, the material to which the formulae apply shall, in the absence of specific
provision to the contrary, be still complying with the requirements of Chapter-2.
(2) Where no test certificates for plates are produced, the material may be treated as iron, if
the Inspecting Authority is satisfied that the material is of suitable boiler quality. If in
such cases the Inspecting Authority is clearly satisfied that the material is of good
quality, a higher strength than that allowed for iron may be permitted but the strength of
the plates shall not, save for special reasons, be assumed to be more than 37kg/mm².
In such cases the values of tensile and shear strength shall not be more than 37kg/mm²
and 30kg/mm² for steel, and 30kg/mm² and 25kg/mm² for iron. For iron across the grain
the tensile strength may be 25kg/mm².666 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) For flat plates of copper, the working pressure as found from the formulae, reduced by
fifty percent shall be the permitted working pressure.
(4) When the quality of material and the make of steel pipe have not been supported by
certificates from the manufacturers in Form-IV(Part-B), the pipes shall be tested in a test
house and the maximum permissible working stress shall be such as the Inspecting
Authority may determine after reasons to be recorded in writing.
27. Procuring of materials. ─ (1) Where procuring materials directly from mills is
not feasible due to small quantity, the following method shall be adopted, namely:-
(a) materials fully identifiable, supported by a materials test report by material
manufacturer but not covered by a form under these regulations,─
(i) when a material is received with complete identification marks applied by the
mill and supported by a materials test report, the manufacturer of boiler, boiler
component, and spares shall demonstrate to the satisfaction of the Inspecting
Authority that all requirements of the material specification specified under
these regulations have been met;
(ii) the materials test report issued by materials manufacturer shall be presented
to the Inspecting Authority for verification;
(iii) any additional tests as determined by the Inspecting Authority shall be
conducted in a test house and results documented;
(iv) Form-IV(Part-B) shall be prepared with specification, size, quantity, reported
test results and jointly signed by manufacturer of boiler, boiler component or
spares and the Inspecting Authority;
(b) materials fully identifiable with mill markings for a production lot but not
supported by materials test reports and forms under these regulations,─
(i) the manufacturer of boiler, boiler components or spares shall present such
materials to the Inspecting Authority for as marked by the mill. Shipping
document or purchase order or as the case may be, drawing are also to be
presented to establish required specification of materials;
(ii) testing of materials shall be conducted as per materials specification and
additional requirements of these regulations, if any;
(iii) number of samples for tests shall be determined by the Inspecting Authority but
not less than 10% of the quantity under consideration;
(iv) test results are to be recorded in Form-IV(Part-B), signed by manufacturer and
the Inspecting Authority;
(v) plates or sheets qualified in the manner as provided above shall not be
permitted for use in boiler shell or drum construction;
28. Standard specifications for materials.─The standard specifications for steel wrought iron
and copper plates and bars, and the cast steel shall be as provided in Chapter -2.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 667
29. Registration of second-hand boilers not in accordance with the standard
conditions.─If a second hand boiler is not conforming to the requirements of these regulations
for its registration, then the same shall not be registered except in the following cases, namely:─
(1) Water Tube Boilers: Where the documents required under its code of manufacture for
its registration are furnished and its workmanship is not in any way doubtful, the second-
hand Water Tube Boiler may be registered by reducing the working pressure of the parts of
the boiler as calculated from the regulations by ten percent:
Provided that a higher working pressure, being not more than the working
pressure allowed by the code of manufacture, may be allowed on the recommendation
of the Board made by it on the basis of life assessment tests carried out on the boiler.
(2) Shell Type Boilers: Where the documents required under its code of manufacture, for its
registration are furnished, the second-hand Shell Type Boiler may be registered by
reducing the working pressure of the parts of the boiler as calculated under these
regulations as per the table given below:
Table 1/1
Age of boiler (from the date of first use) in 25 35 45 50 60 70 80 90 100
years
Reduction in working pressure (percent) 5 10 15 20 30 40 50 60 70
CHAPTER-2
MATERIALS OF CONSTRUCTION
PART-I
30.Plates, Pipes, Tubes, Castings, Forgings and Fittings of Carbon, Alloy,
Stainless Steel and Nickel AlloysGrades.─(1)Theregulation cover boiler plates, tubes,
pipes, castings, forgings and fittings of carbon, alloy, stainless steel and nickel alloy grades and
shall conform in all respects with the requirements herein specified.
(2) The material conforming to other national or international standards which are known to
be commonly used as being suitable for use as boiler plates, tubes, pipes, castings,
forgings and fittings can also be used with the designations of the national or
international standards, provided such materials are not specifically prohibited by these
regulations.
(3) While making boiler plates, tubes, pipes, castings, forgings and fittings to other national
or international standards the allowable stresses, chemical and mechanical properties of
the respective standards shall be followed while designing.
(4) The different grades of material used in boiler plates, tubes, pipes, castings, forgings and
fittings and their design metal temperatures shall be as per Table 2/1.668 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) M number grouping in the Table 2/1 indicates alphanumeric designations that are
assigned to base metals for the purpose of grouping different grades of materials for
welding and post weld heat treatment (PWHT).[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 669
TABLE2 /1: Material Grouping
Serial No. M Number / Group Nominal Plates (‗t‘ thickness in mm) Pipes Tubes Castings Forgings & Fittings Max
composition Permissible
Temp (0C)
(1) (2) (3) (4) (5) (6) (7) (8) (9)
1. C SA 515 Gr60 (t≤ 25) SA 179, BS 3059 427
2. C-Si SA 515 Gr60 (t=26-50) SA 106 Gr A , SA 210 Gr A1 SA 352 LCB SA 266 Gr1 427
M1/Gr 1 (Carbon
Steel) SA 515 Gr60 (t=51-100) SA 106 Gr B
SA515 Gr60 (t> 100)
3. C-Mn-Si SA 350 LF1 427
4. C SA 105 427
5. C-Si SA 515 Gr70 (t≤ 25) SA 216 WCB SA 266 Gr2, 427
SA 515 Gr70 (t=26-50) SA 266 Gr3
SA 515 Gr70 (t> 50)
6. M1/Gr 2 C-Mn-Si SA 516 Gr60, Gr70 (t≤ 12.5) SA 106 Gr C SA 210 Gr C SA 216 WCC, SA 350 LF2 427
(Carbon Steel)
SA 516 Gr60, Gr70 (t=12.6–50) 352 LCC
SA 516 Gr60, Gr70 (t=51-100)
SA 516 Gr60, Gr70 (t>100)
SA 299 GrA (t≤ 25),
SA 299 GrA (t>25)
7. M3/Gr 1 C-0.5 Mo SA 335 Gr P1 SA 209 Gr T1 538
8. (L A S) 0.5 Cr-0.5 Mo SA 335 Gr P2 SA 213 Gr T2 538
9. C-0.5 Mo SA 182 F1 538
M3/Gr 2
10. 0.5 Cr-0.5 Mo SA 182 F2 538
11. 1.25Cr-0.5Mo-Si SA 387 Gr11 Cl 2 SA 335 Gr P11 SA 213 Gr T11 SA 217 WC6 SA 182 F11 Cl 649
1,2,3
SA 234 WP11 Cl 1
M4/Gr 1 SA 336 F11 Cl
(L A S) 1,2,3
12. 1Cr-0.5Mo SA 387 Gr12 Cl 2 SA 335 Gr P12 SA 213 Gr T12 SA 182 F12 Cl 1,2 649
SA 234 WP12 Cl 1
SA 336 F12
13. M5A/Gr 1 2.25Cr-1Mo SA 387 Gr22 Cl 2 SA 335 Gr P22 SA 213 Gr T22 SA 217 WC9 SA 182 F22 Cl 1,3 649
(L A S) SA 234 WP22 Cl 1670 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
14. 5Cr-0.5Mo SA 335 Gr P5 SA 213 Gr T5 SA 182 F5 649
SA 234 WP5 Cl1
M5B/Gr 1 SA 336 F5
15. (A S) 9Cr-1Mo SA 335 Gr P9 SA 213 Gr T9 SA 182 F9 649
SA 234 WP9 Cl1
SA 336 F9
16. 9Cr-1Mo-V SA 387 Gr91 Cl 2 SA 335 Gr P91 SA 213 Gr T91 SA 217 C12A SA 182 F91 649
M15E Gr 1
SA 234 WP91
(A S)
SA 336 F91
17. 18Cr-8Ni SA 240 304 SA 213 TP 304, SA 351 CF8 SA 182 F304 816
SA 213 TP 304H SA 182 F304H
18. 18Cr-8Ni SA 240 304L SA 213 TP 304L SA 182 F304L 427
19. 16Cr-12Ni-2Mo SA 240 316 SA 213 TP 316 SA 351 CF8M SA 182 F316 816
M8/Gr 1 SA 213 TP 316H SA 182 F316H
(S S)
20. 16Cr-12Ni-2Mo SA 240 316L SA 213 TP 316L SA 182 F316L 454
21. 18Cr-10Ni-Ti SA 213 TP 321 SA 182 F321 816
SA 213 TP 321H SA 182 F321H
22. 18Cr-10Ni-Cb SA 213 TP 347 SA 351 CF8C SA 182 F347H 816
SA 213 TP 347H
23. M8/Gr2 (SS) 25Cr-20Ni SA 213 TP 310S 816
24. MX12 12X1Mφ 649
25. MX20 X20CrMoV121 X20CrMoV121 649
26. M43 52Ni–22Cr– SB 168 N06617 SB 167 N06617 SB 167 N06617 SB 564 N06617-
13Co–9Mo Forgings
SB 166 N06617 –
Rod, Bars & Wire
Notes:
1. For stay bars, material as per SA 675 or equivalent can also be used.
2. For ERW tubes, material as perBS/EN 10217 or equivalent canalso be used.
3. For Cold-drawn resistance welded tubes, BS/EN 10305 or equivalent canalso be used.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 671
4. Materials under development may be used with approval fromthe Technical Advisor (Boiler).
5. In addition to the above, materials conforming to IS or to any of the International codes BS, EN, ASME, DIN and JIS can also be used.
6. In case of any variations between the requirements (Chemical, Mechanical and Dimensional tolerances) specified in IBR and the actual
material specifications, the requirements of the latter shall govern.672 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
PART-II
31. Materials ofconstruction for carbon, alloy,stainless steel and nickel alloy plates.─
(1) Steel for plates shall be made by the open hearth, electric furnace or basic oxygen
process or any other process which gives steel having equivalent specified properties.
(2) General deoxidation practice shall be appropriate to the type of steel used,
particularly where the deoxidation practice influences the level of the elevated
temperature properties of steel.
(3) Semi-killed steel may be used for plates in carbon(C) and carbon manganese(C-
Mn) steel with an upper limit of the tensile strength not exceeding 56 kg /mm2 and
with thickness not exceeding 50 millimetre(mm).
(4) The steel may be strand cast or cast in stationary molds.
(5) If heats of the same nominal chemical composition are consecutively strand cast
at one time, the heat number assigned to the cast product (slab) may remain
unchanged until all the steel in the slab is from different heat.
(6) When two consecutively strand cast heats have different nominal chemical
composition ranges, the manufacturer shall remove the transition material by any
procedure that positively separates the grades.
(7) The ratio of reduction of thickness from a strand-cast slab to plate shall be at least
3:1, except that reduction ratios as low as 2:1 are permitted if all the following
limitations are complied with, namely:-
(a) The specified plate thickness is seventy-fivemillimetre(mm)or more.
(b) One or more of the following low hydrogen practices are used, namely:-
(i) vacuum degassing during steelmaking;
(ii) controlled soaking of the slabs or plates;
(iii) controlled slow cooling of the slabs or plates.
(c) The sulphur content is 0.004 percent or less, based upon heat analysis.
(d) One or more of the following practices are used, namely:-(i) electromagnetic
stirring during strand casting;
(ii) soft reduction during strand casting;
(iii)heavy pass reductions or other special practices during plate rolling;
(iv) combined forging and rolling during plate rolling.
(e) The plates are ultrasonically examined based on continuous scanning over
hundred percent of the plate surface.
(f) The plates are through-thickness tension tested.
(g) Unless otherwise specified in the purchase order, plates shall be produced
from plate-as-rolled.
(8) Plates of fusion welded boiler drums, vessels, separators, headers and other
pressure parts shall conform to the chemical composition given in Table 2/2in this
chapter.
(9) The steel shall not contain more than 0.05 per cent of sulphur or phosphorus.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 673
(10) When the material is required for flame cutting or weldingor both, the carbon
content shall not exceed 0.30% and due precautions shall be taken when the carbon
content exceeds 0.26percent.
(11) When steels are intended for service temperatures over 371°C, the silicon
content shall be not less than 0.10percent or alternatively, the material shall be
required topass the proof test for creep quality of carbon steel plates of boiler quality.
(12) (a) In case of Carbon Steel,─
(i) Plates having thickness of twelvemillimetre(mm)or less than that, not intended
for hot forming, can be supplied in unnormalised or as rolled condition subject
to the condition that the code of manufacture provides for the same.
(ii) For plates having thickness more than twelve millimetre(mm), not intended for
hot forming, shall be supplied in the normalised conditions:
(iii) If normalising is to be performed by the fabricator, the plates shall be either
normalised or heated uniformly for hot forming. However, the temperature to
which the plates are heated for hot forming does not significantly exceed the
normalising temperature:
Provided that such normalising may be exemptedby the Competent
Personif it is demonstrated by the manufacturer that equivalent properties can
be produced by the rolling subsequent cooling.
(iv) The boiler manufacturer may, if he so wishes order a check analysis.674 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Table 2/2: Chemical composition (%)
Serial No. Carbon Mangane Phosp Sulp Silicon Chromium Nickel Molybden Vanadium Nitrogen Others
Gradeof materials (C) se (Mn) horus hur (Si) (Cr) (Ni) um(Mo) (V) (N)
(P)
(S)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
SA1 2. 99 GrA (t≤25) 0.26 0.9-1.4 0.035 0.035 0.15-0.4 - - - - - -
SA2 2. 99 GrA (t>25) 0.28 0.9-1.5 0.035 0.035 0.15-0.4 - - - - - -
SA3 5. 15 Gr60 (t≤25) 0.24 0.9 0.025 0.025 0.15-0.4 - - - - - -
SA4 5. 15 Gr60 (t=26-50) 0.27 0.9 0.025 0.025 0.15-0.4 - - - - - -
SA5 5. 15 Gr60 (t=51-100) 0.29 0.9 0.025 0.025 0.15-0.4 - - - - - -
SA6 5. 15 Gr60 (t>100) 0.31 0.9 0.025 0.025 0.15-0.4 - - - - - -
SA7 5. 15 Gr70 (t≤25) 0.31 1.2 0.025 0.025 0.15-0.4 - - - - - -
SA8 5. 15 Gr70 (t=26-50) 0.33 1.2 0.025 0.025 0.15-0.4 - - - - - -
SA9 5. 15 Gr70 (t>50) 0.35 1.2 0.025 0.025 0.15-0.4 - - - - - -
SA1 501. 6 Gr60 (t≤12.5) 0.21 0.6-0.9 0.025 0.025 0.15-0.4 - - - - - -
SA1 511. 6 Gr60 (t=12.6-50) 0.23 0.85-1.2 0.025 0.025 0.15-0.4 - - - - - -
SA1 521. 6 Gr60 (t=51-100) 0.25 0.85-1.2 0.025 0.025 0.15-0.4 - - - - - -
SA1 531. 6 Gr60 (t>100) 0.27 0.85-1.2 0.025 0.025 0.15-0.4 - - - - - -
SA1 541. 6 Gr70 (t≤12.5) 0.27 0.85-1.2 0.025 0.025 0.15-0.4 - - - - - -
SA1 551. 6 Gr70 (t=12.6-50) 0.28 0.85-1.2 0.025 0.025 0.15-0.4 - - - - - -
SA1 561. 6 Gr70 (t=51-100) 0.3 0.85-1.2 0.025 0.025 0.15-0.4 - - - - - -[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 675
SA1 571. 6 Gr70 (t>100) 0.31 0.85-1.2 0.025 0.025 0.15-0.4 - - - - - -
SA1 388. 7 Gr11 Cl 2 0.05-0.17 0.4-0.65 0.025 0.025 0.5-0.8 1.0-1.5 - 0.45-0.65 - - -
SA1 398. 7 Gr12 Cl 2 0.05-0.17 0.4-0.65 0.025 0.025 0.15-0.4 0.8-1.15 - 0.45-0.65 - - -
SA2 308. 7 Gr22 Cl 2 0.05-0.15 0.3-0.6 0.025 0.025 0.5 2.0-2.5 - 0.9-1.10 - - -
SA2 318. 7 Gr91 Cl 2 0.08-0.12 0.3-0.6 0.02 0.01 0.2-0.5 8.0-9.5 0.4 0.85-1.05 0.18-0.25 0.03-0.07 Nb: 0.06-0.1; Al: 0.02;
Ti: 0.01; Zr: 0.01
SA2 224. 0 304 0.07 2 0.045 0.03 0.75 17.5-19.5 8.0-10.5 - - 0.1 -
SA2 234. 0 304L 0.03 2 0.045 0.03 0.75 17.5-19.5 8.0-12 - - 0.1 -
SA2 244. 0 316 0.08 2 0.045 0.03 0.75 16.0-18.0 10.0-14.0 2.0-3.0 - 0.1 -
SA2 254. 0 316L 0.03 2 0.045 0.03 0.75 16.0-18.0 10.0-14.0 2.0-3.0 - 0.1 -
SB2 166. 8 N06617 0.05-0.15 1.0 - 0.01 1.0 20.0-24.0 44.5 min 8.0-10.0 - - Co:10.0-15.0; Fe:3.0;
Al: 0.8-1.5; Cu:0.5;
Ti:0.6; B:0.006
(Note: Maximum when single values specified)676 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) In case ofAlloy Steel,─
(i) Except for Grade 91plates, all plates shall be thermally treated either by
annealing, normalising and tempering, or, when permitted by the purchaser,
accelerated cooling from the austenitising temperature by air blasting or liquid
quenching, followed by tempering.
(ii) Grade 91 plates shall be thermally treated, either by normalising-and-tempering
or by accelerated cooling from the austenitising temperature by air blasting or
liquid quenching, followed by tempering.
(iii) Grade 91 plates shall be austenitised at 1040°C to 1080°C and shall be
tempered at 730°C to 800°C.
(c)In case ofStainless Steel,─The material shall be solution annealed to meet the
mechanical property requirements of the applicable material grades.
(d) In case ofNickel Alloys,─Grade N06617 shall be solution annealed at 1150°C
to 1230°C and quenched in water or rapidly cooled by other means.
32.Freedom from defects, etc.─ (1)Minor surface defects of the plates may be removed by
mechanical means to achieve a smooth level surface provided that the minimum specified
thickness is maintained.
(2) Surface defects may be repaired by welding, only with approval of the Inspecting
Authority provided that the plate is stress relieved after welding where necessary.
33. Rolling margin for carbon steel. ─No plate or rolled section shall be under the
specified thickness at any part, nor more than five per cent over the calculated weight,
except that in the case of thin plates and wide plates the weight tolerances shall be as per
Table 2/3mentioned below:
Table 2/3: Schedule of percentage of rolling weight tolerances for boiler plates
Width in millimetre(mm)
Serial Thickness in Under 1219 to 1524 1828 2134 2438 2743 3048 3352
No. mm 1219 under to to to to to to and
1524 under under under under under under over
1828 2134 2438 2743 3048 3352
% % % % % % % % %
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)
1. 6 to under 8 5 5 5 7 9 12 - - -
2. 8 to under 10 5 5 5 6 7.5 10 11 12 -
3. 1 0 to under 11 5 5 5 6 6 8 9 11 15
4. 1 1 to under 13 5 5 5 5 6 7.5 8 9 12
5. 1 3 to under 16 5 5 5 5 6 6 7.5 9 10
6. 1 6 to under 19 5 5 5 5 5 5 7 8 9[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 677
7. 1 9 to under 25 5 5 5 5 5 5 6 7 8
8. 2 5 to under 51 5 5 5 5 5 5 5 9 7
Note: All the above margins will be taken over net theoretical weight.
34. Testing and inspection. ─The tests and inspections shall be made at the place of
manufacture prior to despatch; but in the event of any of the material proving unsatisfactory
in the course of being worked into boilers, such material shall be rejected, despite any
previous certificate of satisfactory testing, and such further tests of the material from the
same charge shall be made as the Competent Person may consider desirable.
35. Selection of test pieces.─All test piecesof material shall be selected by the Competent
Person and tested in his presence, andthereafter he shall satisfy himself that the conditions
herein described are fulfilled.
36. Tensile test pieces. ─(1)The tensile test pieces shall be as per the relevant material
specifications.
(2) For plate thickness exceeding 60 millimetre(mm), test pieces shall be taken from the
exterior third of the plate cross-section and wherever practicable, the rolled surface
shall be retained on two opposite sides of the test piece.
37.Tensile test.─(1)The test specimen shall comply with the following requirements,
namely:-
Table 2/4
Serial Grade Mechanical Properties (minimum, when single value specified)
No.
TS YS % Elongation on GL
MPa (kg/mm2) MPa (kg/mm2) = 50 mm min.
(1) (2) (3) (4) (5)
1. SA 299 GrA (t≤25) 515-655 (52.5-66.8) 290 (29.6) 19
2. SA 299 GrA (t>25) 515-655 (52.5-66.8) 275 (28) 19
3. SA 515 Gr60 (t≤25) 415-550 (42.3-56.1) 220 (22.4) 25
4. SA 515 Gr60 (t=26-50) 415-550 (42.3-56.1) 220 (22.4) 25
5. SA 515 Gr60 (t=51-100) 415-550 (42.3-56.1) 220 (22.4) 25
6. SA 515 Gr60 (t>100) 415-550 (42.3-56.1) 220 (22.4) 25
7. SA 515 Gr70 (t≤25) 485-620 (49.5-63.2) 260 (26.5) 21
8. SA 515 Gr70 (t=26-50) 485-620 (49.5-63.2) 260 (26.5) 21
9. SA 515 Gr70 (t>50) 485-620 (49.5-63.2) 260 (26.5) 21
10. SA 516 Gr60 (t≤12.5) 415-550 (42.3-56.1) 220 (22.4) 25
11. SA 516 Gr60 (t=12.6-50) 415-550 (42.3-56.1) 220 (22.4) 25
12. SA 516 Gr60 (t=51-100) 415-550 (42.3-56.1) 220 (22.4) 25
13. SA 516 Gr60 (t>100) 415-550 (42.3-56.1) 220 (22.4) 25
14. SA 516 Gr70 (t≤12.5) 485-620 (49.5-63.2) 260 (26.5) 21
15. SA 516 Gr70 (t=12.6-50) 485-620 (49.5-63.2) 260 (26.5) 21
16. SA 516 Gr70 (t=51-100) 485-620 (49.5-63.2) 260 (26.5) 21
17. SA 516 Gr70 (t>100) 485-620 (49.5-63.2) 260 (26.5) 21
18. SA 387 Gr11 Cl 2 515-690 (52.5-70.3) 310 (31.6) 22
19. SA 387 Gr12 Cl 2 450-585 (45.9-59.6) 275 (28) 22678 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
20. SA 387 Gr22 Cl 2 515-690 (52.5-70.3) 310 (31.6) 18
21. SA 387 Gr91 Cl 2 585-760 (59.6-77.5) 415 (42.3) 18
22. SA 240 304 515 (52.5) 205 (21) 40
23. SA 240 304L 485 (49.5) 170 (17.3) 40
24. SA 240 316 515 (52.5) 205 (21) 40
25. SA 240 316L 485 (49.5) 170 (17.3) 40
26. SB 168 N06617 655 (66.8) 240 (24.5) 35
(2) In case of Carbon Steel,─ (i) The upper yield point at room temperature shall not be
less than 50% of the specified minimum tensile strength at room temperature.
(ii) The maximum permissible stress shall be taken as provided in governing boiler
codes of the country of the material to which it belongs and in case of non-
availability of the same, for the purpose of evaluating the maximum permissible
stress, the minimum values of the stress at proof limit 0.2% at elevated temperature
(E) may be calculated by multiplying the minimum specified tensile strength at room
t
temperature (R ) by the value of the ratio (Et/R ) given in Table 2/5below:
20 20
Table 2/5
Minimum values for the ratio of the stress at proof limit 0.2% at elevated temperature
(E) to the minimum specified tensile strength at room temperature (R ) of carbon
t 20
Steel Boiler plates
Temperature *250 *275 300 325 350 375 400 425
°C
E/R 0.40 0.38 0.36 0.34 0.33 0.32 0.31 0.30
t 20
*For temperature lower than 300°C any test required for acceptance purposes, in the
absence of records of previous test at these temperatures shall be at 300°C, in which case
the proof stress shall be not less than value obtained by calculation from the specified
minimum tensile strength at room temperature and the above poof-ratio of 0.36 for 300°C.
38. Number of tensile tests.─Forthe purpose of test ofshell plates, butt straps and plates,
gusset plates, end plates, furnace plates and flanging plates, one tensile test piece shall be
cut from each plate as rolled.
39. Bend testsin case ofcold bends,─(1)Test pieces shall be sheared lengthwise or
crosswise from plates or bars, and shall not be less than 38 millimetre(mm) wide, but for small
bars the whole section may be used.
(2) (a)In all cold bend tests, on samples 13 millimetre(mm) in thickness and above, the
rough edge or burcaused by shearing may be removed by filling or grinding and
samples 25 millimetre(mm) in thickness and above may have the edges machined,
but the test pieces shall receive no other preparation.
(b) The test pieces shall not be annealed unless the material from which they are
cut is similarly annealed and in such case the test piece shall be similarly treated
with the material before testing.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 679
(3) For bend test of plates of all grades of steel, the test piece shall withstand, without
fracture, being bent cold through 180° around a mandrel, the radius of which shall
have a relationship to the plate thickness as given below:─
Serial No. Tensile strength Mandrel Radius
(1) (2) (3)
1. 36 - 49 kg/mm2 1 T*
2. 41 - 57 kg/mm2 1 T
3. 45 - 64 kg/mm2 1.5 T
*Where, T = Plate thickness
(4) For small sectional material the bend tests may be made from the flattened bar.
(5) Bend tests may be made either by pressure or by blows.
40.Number of bend tests.─A bend test shall be taken from each plate as rolled. The bend
tests from shell plates, butt straps and other plates which have not to be flanged or worked
in the fire or which when in use are not to be exposed to flame, shall be cold bend tested.
41. Additional tests before rejection.─(1)(a)Ifthe test pieces first selected by the
Competent Person fail to fulfil the test requirementsunder these regulations, two further tests
of the same heat may be made, but if either of these fail, the plates or bars from which test
pieces were cut shall be rejected.
(b) In all such cases further tests shall be made before any material from the same charge
can be accepted.
(2) If the unsatisfactory result of a test is due to technical conditions of the testing method or
to a closely limited defect of a test piece, then, the failure can be left out of consideration
in decision on the fulfilment of the requirement and another test piece may be
substituted.
(3)If the unsatisfactory result of test is due to an unfavourable heat treatment, the plate and
the test strip may be heat treated againandthereafter, the entire test shall be repeated.
42.Branding.─(1)Every plate, section and bar shall be clearly and distinctly marked by the
maker at two places with the number of identification mark by which they can be traced to
the charge from which the material was made.
(2) Every plate shall also be stamped by the steel maker as provided in IS: 2002andwiththe
following information, namely:-
(a) Name of manufacturer;
(b) Specification;
(c) Heat Number;
(d) Plate Number, and
(e) Stamp.
43. Defacing of rejected material.─In the event of the material failing to withstand the
prescribed tests, the identification mark of the Competent Person which has been
stamped on the material, shall be defaced by punch marks extending beyond the
identification mark, in the form of a cross, thus denoting that the material has failed.680 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
44. Facilities for inspection.─ The maker shall adopt a system of making the ingots, billets,
slabs, plates, bars, etc. so as to enable finished material to be traced to the original
charge, and the Inspector or Competent Person, as the case may be, shall be given
every facilitybymaker for tracing all plates and bars to their respective charges, and for
witnessing the required testsand when Inspector or Competent Person, as the case may
beis satisfied with the material and with the results of the tests,theInspector or Competent
Person, as the case may be,shall be provided two copies of test reports of the material for
his signature.
45.Steel not produced where rolled.─(1)Where steel is not produced in the works at which
it is rolled, a certificate in Form V(Part-A)or Form IV(Part-C), as the case may be, shall be
supplied to the Competent Person deputed to witness the testing of the material, stating
the Open Hearth or Electric Process or any of the Oxygen Processes by which it was
made, the name of the Steel-Maker who supplied it, also the numbers of the charges for
reference to the books of the Steel-Maker.
(2)The number of the charge shall be marked on each plate or bar for the purpose of
identification.
46. Maker’s certificate.─Before the mill sheets are signed, the maker shall furnish to the
Competent Person with a certificate inForm V(Part-A)or Form IV(Part-C), as the case
may be, guaranteeing that the material has been made by an Open Hearth or an Electric
Process, acid or basic, and that it withstands satisfactorily test described above in the
presence of the Competent Person.
PART-III
47. Seamless Tubes of Carbon, Alloy, Stainless SteelandNickel Alloys for Boiler,
Superheater, Reheater and Heat Exchanger.─ (1)These regulations shall apply on hot
finished and cold drawn seamless boiler, super heater, re-heater and heat exchanger tubes
of carbon, alloy, stainless steel and nickel alloy gradesandshall conform the requirements
herein specifiedin Part III in addition to the requirements specified in regulation30.
(2) For design metal temperatures Table2/1 of regulation30shall be considered.
(3) (a)The tubes shall be seamless and manufactured from fully killed steel produced by
an open hearth or electric process or any of the oxygen process.
(b) The steel shall conform to the following limits of chemical composition, namely:-
Table 2/6: Chemical Composition (%)
Serial Grade Chemical composition %
No. Carbon Mang Silic Sulp Phosp Chro Molyb Van Nick Other
anese on hur horus mium denu adiu el Elements
(C)
m m(V)
(Mn) (Si) (S) (P) (Cr) (Ni)
(Mo)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)
1 SA 179
0.06-0.18 0.27.- 0.25 0.03 0.035
0.63 max 5 max
max[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 681
2 SA 210 Gr
0.27 max* 0.93 0.10 0.03 0.035
A1
max min 5 max
max
3 SA 210 Gr C
0.35 max* 0.29- 0.10 0.03 0.035
1.06 min 5 max
max
4 SA 209 Gr T1 0.10 0.30 0.10 0.02 0.025 ------- 0.44 --- --- ----
0.20 0.80 0.50 5 max 0.65
max
5 SA 213 Gr T2 0.10 0.30 0.10 0.02 0.025 0.50 0.44 ---- --- -----
0.20 0.61 0.30 5 max 0.81 0.65
max
6 SA 213 Gr T5 0.15 0.30 0.50 0.02 0.025 4.00 0.45 ---- ---- -----
max 0.60 max 5 max 6.00 0.65
max
7 SA 213 Gr T9 0.15 0.30 0.25 0.02 0.025 8.00 0.90 ---- ---- -----
max 0.60 1.00 5 max 10.0 1.10
max
8 SA 213 Gr 0.05 0.30 0.50 0.02 0.025 1.00 0.44 ---- ---- -----
T11 0.15 0.60 1.00 5 max 1.50 0.65
max
9 SA 213 Gr 0.05 0.30 0.50 0.02 0.025 0.80 0.44 ---- --- -----
T12 0.15 0.61 max 5 max 1.25 0.65
max
10 SA 213 Gr 0.05 0.30 0.50 0.02 0.025 1.90 0.87 ---- ---- -----
T22 0.15 0.60 max 5 max 2.60 1.13
max
11 SA 213 Gr 0.07 0.30 0.20 0.01 0.020 8.00 0.85 0.18 0.40 Cb 0.06 -
T91 0.14 0.60 0.50 0 max 9.50 1.05 0.25 max 0.10
max N 0.030-
0.070
Al 0.02
max
Ti 0.01
max
Zr 0.01
max
12 SA 213 0.08 2.00 1.00 0.03 0.045 18.0 ---- --- 8.00 ----
TP304 max max max 0 max 20.0 11.0
max
13 SA 213 0.04 2.00 1.00 0.03 0.045 18.0 ----- --- 8.00 -----
TP304H 0.10 max max 0 max 20.0 11.0
max
14 SA 213 0.035 2.00 1.00 0.03 0.045 18.0 ----- --- 8.00 -----
TP304L max max max 0 max 20.0 12.0
max
15 SA 213 0.08 2.00 1.00 0.03 0.045 24.0 ---- --- 19.0 -----
TP310S max max max 0 max 26.0 22.0
max
16 SA 213 0.08 2.00 1.00 0.03 0.045 16.0 2.00 --- 10.0 -----
TP316 max max max 0 max 18.0 3.00 14.0
max
17 SA 213 0.040 2.00 1.00 0.03 0.045 16.0 2.00 --- 11.0 -----
TP316H 0.10 max max 0 max 18.0 3.00 14.0
max
18 SA 213 0.035 2.00 1.00 0.03 0.045 16.0 2.00 --- 10.0 -----
TP316L max max max 0 max 18.0 3.00 15.0
max682 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
19 SA 213 0.08 2.00 1.00 0.03 0.045 17.0 ---- --- 9.00 Ti = 5xC
TP321 max max max 0 max 20.0 13.0 min
max 0.60 max
20 SA 213 0.04 2.00 1.00 0.03 0.045 17.0 ---- --- 9.00 Ti = 4xC
TP321H 0.10 max max 0 max 20.0 13.0 min
max 0.60 max
21 SA 213 0.08 2.00 1.00 0.03 0.045 17.0 ---- --- 9.00 Cb = 10xC
TP347 max max max 0 max 20.0 13.0 min, 1.00
max max
22 SA 213 0.04 2.00 1.00 0.03 0.045 17.0 ---- --- 9.00 Cb = 8xC
TP347H 0.10 max max 0 max 19.0 13.0 min, 1.00
max 0 max
23 SB 167 0.05 1.0 1.0 0.01 - 20.02 8.0 - 44.5 Co:10.0-
N06617 0.15 max max 5 4.0 10.0 min 15.0; Fe:3.0
max max; Al:
0.8-1.5;
Cu:0.5 max;
Ti:0.6 max;
B:0.006
max
* For grade SA 210 Gr A1 and SA 210 Gr C for each reduction of 0.01% below the specified
carbon maximum, an increase of 0.06% Manganese above the specified maximum will be
permitted up to a maximum of 1.35%.
(c) The grain size of cold worked grade TP 321H shall be No.7 or coarser.
(4) (a)Hot finished tubes of Carbon Steel grades need not be heat treated. Cold drawn
tubes of Carbon Steel grades shall be given a sub-critical annealing, a full anneal, or
a normalising heat treatment after the final cold finishing process.
(b) All tubes of gradesprovided in Table 2/6, except Carbon steel grades, T91,
12X1M, X20CrMoV121 and N06617 grades shall be reheated and furnished in full
annealed, isothermal annealed or normalised and tempered condition. If furnished in
the normalised and tempered condition, the minimum tempering temperature for
Grades T1 and T11 shall be 650°C and the minimum tempering temperature for
Grades T5, T9 and T22 shall be 675°C.
(c )Tubing of Grades T1, T2 and T12 either hot finished or cold drawn, may be given
a final heat treatment at 650°C to 730°C, instead of heat treatments specified in
clause (b) above, at the option of the manufacturer.
(d) Grade T91 shall be normalised at 1040°C minimum and tempered at 730°C
minimum as a final heat treatment.
(e) Grade 12x1Mo shall be normalised at 950°C - 980°C and tempered at 720°C -
750°C for a period of 1 to 3 hours.
(f) Grade X20CrMoV121 shall be normalised at 1020°C - 1070°C and tempered at
730°C - 780°C for a period of 1 hour minimum.
(g) All stainless steel tubes shall be furnished in the heat treated conditionandthe
heat treatment procedure, except for the H gradessteel shall consist of heating
the material to a minimum temperature of 1040°C and quenching in water or
rapidly cooling by other means.
(h) All H gradessteel shall be furnished in the solution treated condition. If cold
working is involved in processing, the minimum solution treating temperatures for
grades TP321H and TP347H shall be 1100°C and for grades TP304H and
TP316H shall be 1040°Cand if the P grade is hot rolled, the minimum solution[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 683
treatment for grades TP 321 H and TP 347 H shall be 1050°C and for grades TP
304H and TP 316H shall be 1040°C.
(i) Grade N06617 shall be solution annealed at 1150°C to 1230°C and quenched in
water or rapidly cooled by other means.
(5) (a) The tubes shall be well finished, cleaned and free from harmful defects and they
shall be reasonably straight, smooth, cylindrical and subject to the following
tolerances, namely:-,
(i) They shall have smooth ends free of burrs;
(ii)They shall have a workmanlike finish;
(iii) Surface imperfections like any discontinuity or irregularity found in the tube
may be removed by grinding, provided that smooth curved surface is maintained,
and the wall thickness is not decreased to less than that permitted;
(iv) The outside diameter at the point of grinding may be reduced by the amount so
removed.
(b) Permissible variations in outside diameter shall be as follows:-
Table 2/7: Carbon Steel, alloy and stainless steels except 12X1M, X20CrMoV121 and
N06617
Serial No. Outside Diameter (mm) Permissible variation Over Permissible
(mm) variation Under
(mm)
(1) (2) (3) (4)
1 Hot finished seamless tubes
2 101.6 and under 0.4 0.8
3 Over 101.6 to 190.5 incl. 0.4 1.2
4 Over 190.5 to 228.6 incl. 0.4 1.6
5 Cold finished seamless tubes
6 Under 25.4 0.1 0.1
7 25.4 to 38.1 incl. 0.15 0.15
8 Over 38.1 to 50.8 excl. 0.2 0.2
9 50.8 to 63.5 excl 0.25 0.25
10 63.5 to 76.2 excl. 0.3 0.3
11 76.2 to 101.6 incl. 0.38 0.38
12 Over 101.6 to 190.5 incl. 0.38 0.64
13 Over 190.5 to 228.6 incl. 0.38 1.14
Table 2/8: For grade 12X1M
Serial No. Outside diameter (mm) Permissible Variation (mm)
Over Under
(2) (3) (4)
(1)
1 Hot finished and cold finished tubes
2 Under 30.0 0.30 0.30
3 30 to 50 0.40 0.40684 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
4
Over 50.0 0.80% 0.80%
Table 2/9: For grade X20CrMoV121
Serial No.
Outside diameter (mm) Permissible Variation (mm)
Over Under
(1) (2) (3) (4)
1. Hot finished Seamless tubes
2. 100 and under 0.75% (0.5 mm min) 0.75% (0.5 mm min)
3. Cold finished seamless tubes
4. 120 and under 0.60% (0.25 mm min) 0.60%(0.25 mm min)
5. Over 120 0.75% 0.75%
Table 2/10: For grade N06617
Serial No. Outside diameter (mm) Permissible Variation (mm)
Over Under
(1) (2) (3) (4)
1. Seamless Cold-worked tubes
2. Over 10 and less than 16 0.13 0.13
3. 16 - 38 0.19 0.19
4. Over 38 - 76 0.25 0.25
5. Over 76 to 114 0.38 0.38
6. Over 114 to 152 0.51 0.51
7. Over 152 to 168 0.64 0.64
8. Over 168 to 219 0.79 0.79
9. Hot finished Tubes
10. 19 to 38 0.4 0.8
11. Over 38.1 to 102 0.8 0.8
12. Over 102 to 235 1.6 0.8[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 685
(c) Permissible variation in Wall Thickness in percentageshall be as follows:-.
Table 2/11: Carbon Steel, alloy and stainless steels except 12X1M, X20CrMoV121 and
N06617
Serial Outside % variation in wall thickness
No. diameter
2.4 mm and under Over 2.4 mm to 3.8 Over 3.8 mm to Over 4.6 mm
(mm)
mm Incl. 4.6 mm incl.
Over Under Over Under Over Under Over Under
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
1. Seamless Hot Finished tubes
2. 101.6 & 40 0 35 0 33 0 28 0
under
3. Over 101.6 NA NA 35 0 33 0 28 0
4. Seamless Cold Finished tubes
5.
Over Under
6. 38.1 and under 20 0
7. Over 38.1 22 0
Table 2/12: For Grade 12X1M
Serial No. Outside Diameter (mm) Permissible variation %
Over Under
(1) (2) (3) (4)
1. Hot Finished Seamless Tubes
2. 108 and under 15 10
3. Over 108 20 5
4. Cold Finished Seamless Tubes
5. All sizes 10 10
Table 2/13: For Grade X20CrMoV121
Outside diameter (mm) Permissible variation %
Over Under
(1) (2) (3)
100 and under 12.5 10
Table 2/14: For Grade N06617
Serial No. Outside diameter (mm) Permissible Variation (%)
Over Under
(1) (2) (3) (4)
1. Seamless Cold-worked tubes686 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
2. Over 10 and less than 16 15.0 15.0
3. 16 - 38 10.0 10.0
4. Over 38 - 76 10.0 10.0
5. Over 76 to 114 10.0 10.0
6. Over 114 to 152 12.5 12.5
7. Over 152 to 168 12.5 12.5
8. Over 168 to 219 12.5 12.5
9. Hot finished Tubes
10. 19 to 38 12.5 12.5
11. Over 38.1 to 102 12.5 12.5
12. Over 102 to 235 12.5 12.5
(d) Permissible variations in length shall be as follows:-
Table 2/15: Carbon Steel, alloy and stainless steels except 12X1M, X20CrMoV121 and
N06617
Serial No. Method of manufacture Outside diameter Cut length (mm)
(mm)
Over Under
(1) (2) (3) (4) (5)
1. Seamless hot finished All sizes 5 0
2. Seamless cold finished Under 50.8 3 0
50.8 and over 5 0
Note: The abovepermissible variations in lengths apply to cut lengths up to and including 7.3 m. For
lengths over 7.3 m, an additional over tolerance of 3 mm for each 3 m or fraction thereof, shall be
permissible, up to a maximum of 12 mm. Length tolerances on the positive side other than specified
may be mutually agreed.
Table 2/16: For grade 12X1M
Serial No. Outside diameter (mm) Length of tubes (m) Permissible variation (mm)
Over Under
(1) (2) (3) (4) (5)
1. Under 108 Under 9 15 0
2.
9 to 12 35 0[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 687
3. 108 and over All lengths 50 0
Table 2/17: For grade X20CrMoV121
Permissible variation (mm)
Serial No. Length of tube (m)
Over Under
(1) (2) (3) (4)
1. 6 and under 10 0
2. Over 6 to 12 incl. 15 0
Table 2/18: For grade N06617
Permissible variation in Length (mm)
Serial No. Outside Diameter of tube
(mm) Over Under
(1) (2) (3) (4)
1. Under 50.8 3.2 0
2. 50.8 and over 4.8 0
48.Selection of Tubes for Test.─(1) (a) (i)Test specimens required for the flattening,
expandingor flaring test specifiedherein below shall be taken from the ends of finished tubes
prior to upsetting swaging, expanding or any other forming operations or being cut to length.
(ii)They shall be smooth on the ends and free from burrs and flaws.
(b) (i) If desirable and practicable tensile test may be carried out on full section of the
tubes up to the capacity of the testing machine.
(ii) For large size tubes, the tensile test specimen shall consist of strip cut longitudinally
from the tube and which is not straightened within the gauge length and further heat
treated.
(c) If any test specimen shows flaws or defective machining it shall be discarded and
another specimen be taken into consideration.
(d) All specimens shall be tested at room temperature.
(2) (a)The test specified herein below shall be made on minimum two tubes for first hundred
tubes and one per hundredor part thereof for tubes over 100 numbers from each lot.
(b)Lot applies to all tube of same size andwall thickness of same heat andheat treatment.
(3) (a)The test specimen shall comply with the requirementsas specified in table 2/19.
(b)The hardness test may be carried out on the wall cross section or on a flat on the
outside surface of the tube sample.
Table 2/19: Mechanical Property Requirements
Serial Grade Yield strength Tensile Strength % Elongation Hardness
No. MPa (kg/mm2) MPa (kg/mm2) on GL= 50 mm
HRB HB
Min Min min
max max
*
(1) (2) (3) (4) (5) (6)
1. SA 179 180 (18.3) 325 (33.1) 35 72 130
2. SA 210 Gr A1 255 (26.1) 415 (42.2) 30 79 143
3. SA 210 Gr C 275 (28.2) 485 (49.3) 30 89 179688 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
4. SA 209 Gr T1 205 (21.1) 380 (38.7) 30 80 146
5. SA 213 Gr T2 205 (21.1) 415 (42.2) 30 85 163
6. SA 213 Gr T5 205 (21.1) 415 (42.2) 30 85 163
7. SA 213 Gr T9 205 (21.1) 415 (42.2) 30 89 179
8. SA 213 Gr T11 205 (21.1) 415 (42.2) 30 85 163
9. SA 213 Gr T12 220 (22.5) 415 (42.2) 30 85 163
10. SA 213 Gr T22 205 (21.1) 415 (42.2) 30 85 163
11. SA 213 Gr T91 415 (42.2) 585 (59.6) 20 25 HRC 250
12. 12X1Mφ 274 (28.0) 441 (45.0) 21 85 163
637 (65.0)
13. X20CrMoV121 490 (50.0) 690 (70.4) 17 25 HRC 250
840 (85.7)
14. SA 213 TP 304 205 (21.1) 515 (52.5) 35 90 192
15. SA 213 TP304H 205 (21.1) 515 (52.5) 35 90 192
16. SA 213 TP304L 170 (17.3) 485 (49.5) 35 90 192
17. SA 213 TP310S 205 (21.1) 515 (52.5) 35 90 192
18. SA 213 TP316 205 (21.1) 515 (52.5) 35 90 192
19. SA 213 TP316H 205 (21.1) 515 (52.5) 35 90 192
20. SA 213 TP316L 170 (17.3) 485 (49.5) 35 90 192
21. SA 213 TP321 205 (21.1) 515 (52.5) 35 90 192
22. SA 213 TP321H 205 (21.1) 515 (52.5) 35 90 192
23. SA 213 TP347 205 (21.1) 515 (52.5) 35 90 192
24. SA 213 TP347H 205 (21.1) 515 (52.5) 35 90 192
25. SB 167 N06617 240 (24.5) 655 (66.8) 35 - -
*The tensile test specimen shall be as per the relevant material specifications.
Note: For longitudinal strip tests of Carbon steel a deduction in percentage elongation 1.5%
shall be made for each 0.8 mm decrease in wall thickness under 8 mm from the minimum
elongation value requirement.
(4) A section of the tube not less than 63 mm in length shall be flattened cold between two
parallel flat surfaces to a distance between the plates (H) as calculated by the formula
given below, without showing any sign of a crack or flaw:
H = (1 + e) t / e + t/D
Where, t = specified thickness of tube (mm)
D = specified outside diameter of the tube (mm)
e = a constant, as given below
e = 0.07 for Carbon steel with maximum specified carbon above 0.18%
e = 0.09 for Carbon steel with maximum specified carbon 0.18% or less.
e = 0.08 for alloy steel
e = 0.09 for Austenitic steel[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 689
Note: No flattening test required for grade N06617.
(5) A section of the tube approximately 100 mm in length shall stand being flared with a tool
having a 60° included angle until the tube at the mouth of the flare has been expanded to
the percentages given below, without cracking:
Table 2/20
Serial No. Ratio of inside diameter to outside Minimum expansion of inside
diameter diameter %
(1) (2) (3)
1. 0.9 21
2. 0.8 22
3. 0.7 25
4. 0.6 30
5. 0.5 39
6. 0.4 51
7. 0.3 68
Note: No expanding or flaring test required for grade N06617.
(6) (a)(i)If any one or more tests specified in these regulations fail, two further tests of
the same kind may be made on two other tubes of the same batch.
(ii) If any of these tests fails, the batch of the tubes represented may be given a
further heat treatment and entire set of test shall be repeated.
(b) If the repeat tests are satisfactory the tubes shall be accepted. If any failure in
the tests should occur, the entire batch of the tubes shall be rejected.
(7) (a)Each tube shall be tested by the manufacturer and shall withstand a hydraulic
pressure of one and half timesof the design pressure subject to a minimum of 1
kg/mm2, but not greater than pressure calculated by the following formula:
P = 2 S t / D
Where, P = test pressure
D = specified outside diameter of the tube
t = specified wall thickness of the tube
S = stress which shall be taken as 40% of the minimum tensile strength at
room temperature for carbon and alloy steel and 80% of the minimum yield
strength at room temperature for austenitic stainless steel.
(b) Despite anything contained in the clause(a), the hydraulic test at the maker‘s
works may be dispensed with, provided that the tubes are subject to non-
destructive testing by an appropriate method like Ultrasonic or Eddy Current or
Stray Flux testing.690 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
PART-IV
49.Seamless Carbon, Alloy Steel and Nickel Alloy Pipes.– (1)This regulation shall
applyon hot finished and cold drawn seamless carbon, alloy steel and Nickel alloy pipes for
high temperature serviceand the pipes shall conform in all respects with the requirements
underthis regulationin addition to the requirements specified in regulation30.
(2) For design metal temperatures Table 2/1of regulation30shall be considered.
(3) (a)The pipes shall be seamless and manufactured from fully killedsteel produced by
an open hearth or electric process or any of the oxygen processes.
(b) The steel shall conform to the following limits of chemical composition, namely:–
Table 2/21: Chemical Composition (%)
Serial No. Grade Chemical composition %
Carbo Mang Silico Sulphur Phosp Chro Molyb Vanad Nickel Copp Other
n (C) anese n(Si) (S) horus mium( denu ium (Ni) er Elements
(Mn) (P) Cr) m (V) (Cu)
(Mo)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (1)
1. SA 106 0.25* 0.27 0.10 0.035 0.035 0.40** 0.15** 0.08** 0.40** 0.40**
Gr A Max 0.93 Min Max Max Max Max Max Max Max
2. SA 106 0.30* 0.29 0.10 0.035 0.035 0.40** 0.15** 0.08** 0.40** 0.40**
Gr B Min 1.06 Min Max Max Max Max Max Max Max
3. SA 106 0.35* 0.29 0.10 0..035 0.035 0.40** 0.15** 0.08** 0.40** 0.40**
Gr C Max 1.06 Min Max Max Max Max max Max Max
4. SA 335 0.10 0.30 0.10 0.025 0.025 ---- 0.44 ---- ---- -----
Gr P1 0.20 0.80 0.50 max max 0.65
5. SA 335 0.10 0.30 0.10 0.025 0.025 0.50 0.44 ---- ---- -----
Gr P2 0.20 0.61 0.30 max max 0.81 0.65
6. SA 335 0.15 0.30 0.50 0.025 0.025 4.00 o.45 ---- ---- -----
Gr P5 max 0.60 max max max 6.00 0.65
7. SA 335 0.15 0.30 0.25 0.025 0.025 8.00 0.90 ---- ---- -----
Gr P9 max 0.60 1.00 max max 10.0 1.10
8. SA 335 0.05 0.30 0.50 0.025 0.025 1.00 0.44 ---- ---- -----
Gr P11 0.15 0.60 1.00 max max 1.50 0.65
9. SA 335 0.05 0.30 0.50 0.025 0.025 0.80 0.44 ---- ---- -----
Gr P12 0.15 0.61 max max max 1.25 0.65
10. SA 335 0.05 0.30 0.50 0.025 0.025 1.90 0.87 ---- ---- -----
Gr P22 0.15 0.60 max max max 2.60 1.13
11. SA 335 0.08 0.30 0.20 0.010 0.020 8.00 0.85 0.18 0.40 Cb=0.06 -
Gr P91 0.12 0.60 0.50 max max 9.50 1.05 0.25 max. 0.10
N=0.030 -
0.70
Al=0.02 max.
Ti=0.01 max.
Zr=0.01
max.
12. X20Cr 0.17 1.00 0.50 0.03 0.030 10.0 0.80 0.25 0.30 ----
MoV121 0.23 max max max max 12.5 1.20 0.35 0.80
13. SB 167 0.05 1.0 1.0 0.015 - 20.02 8.0 - 44.5 0.5 Co:10.0-15.0;
N06617 0.15 max max max 4.0 10.0 min max Fe:3.0 max;
Al: 0.8-1.5;
Ti:0.6 max;
B:0.006 max[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 691
* For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06%
manganese above the specified maximum will be permitted up to a maximum of 1.35%.
** Cr + Cu + Mo + Ni + V < 1.0 %
(4) (a)(i)Carbon Steelhot finished pipes need not be heat treated.
(ii)Cold drawn pipes shall be given a sub-critical anneal, a full anneal, or a normalising
heat treatment after the final cold finishing process.
(b) (i)Pipes of grades P1, P2, P5, P9, P11, P12, and P22 except P91, X20CrMoV121
and N06617 shall be reheated and furnished in full annealed, isothermal annealed or
normalised and tempered condition.
(ii) If furnished in the normalised and tempered condition, the minimum tempering
temperature for grade P1, P2, P11 and P12 shall be 650°C and the minimum
tempering temperature for grades P5, P9 and P22 shall be 675°C.
(c)Pipes of grades P1, P2 and P12 either hot finished or cold drawn may be given a final
heat treatment at 650°C to 705°C, instead of heat treatment specified in clause (b)
above at the option of the manufacturer.
(d) Grades P91 shall be normalised at 1040°C minimum and tempered at 730°C
minimum as a final heat treatment.
(e) Grades X20CrMoV121 shall be normalised at 1020°C - 1070°C and tempered at
730°C - 780°C for a period of one hour minimum.
(f) Grade N06617 shall be solution annealed at 1150°C to 1230°C and quenched in
water or rapidly cooled by other means.
(5) (a)(i)The pipes shall be finished, cleaned free from harmful defects.
(ii)They shall be reasonably straight, smooth, cylindrical and subject to the tolerance
specified in this sub-regulation. Pipes manufacturer shall explore a sufficient number of
visual inspections to provide reasonable assurance that they have been properly
evaluated.
(b) Permissible variations in outside diametershall be as follows:-
Table 2/22: Carbon Steel Hot finished and cold finished seamless pipes
Serial No. Outside diameter (mm) Permissible variations (mm)
Over Under
(1) (2) (3) (4)
1. 10.3 to 48.3 incl., 0.40 0.40
2. Over 48.3 to 114.3 incl., 0..80 0.80
3. Over 114.3 to 219.1 incl., 1.60 0.80
4. Over 219.1 to 457.0 incl., 2.40 0.80
5. Over 457.0 to 660.0 incl., 3.20 0.80
6. Over 660.0 to 864.0 incl., 4.00 0.80
7. Over 864.0 to 1219.0 4.80 0.80
incl.,692 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Table 2/23: For all grades of alloy steel except X20CrMoV121 and N06617
Serial No. Hot finished and Cold finished seamless pipes
Outside diameter (mm) Permissible variations (mm)
Over Under
(1) (2) (3) (4)
1. 10.3 to 48.3 incl. 0.40 0.40
2. Over 48.3 to 114.3 incl. 0.80 0.80
3. Over 114.3 to 219.1 incl. 1.60 0.80
4. Over 219.1 to 300 incl. 2.40 0.80
5. Over 300. 1% 1%
Table 2/24: For Grade X20CrMoV121
Serial No. Outside diameter Permissible variations (mm)
(mm)
Over Under
(1) (2) (3) (4)
1. 100 and under 0.75% 0.75%
2. Over 100 to 320 incl. 0.90% 0.90%
3. Over 320 1.00% 1.00%
Table 2/25: For Grade N06617
Serial No. Outside diameter (mm) Permissible Variation (mm)
Over Under
(1) (2) (3) (4)
1. Seamless Cold-worked pipes
2. Over 10 and less than 16 0.13 0.13
3. 16 - 38 0.19 0.19
4. Over 38 - 76 0.25 0.25
5. Over 76 to 114 0.38 0.38
6. Over 114 to 152 0.51 0.51
7. Over 152 to 168 0.64 0.64
8. Over 168 to 219 0.79 0.79
9. Hot finished pipes[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 693
10. 64 to 114 0.79 0.79
11. Over 114 to 165 1.2 1.2
12. Over 165 to 235 1.6 1.6
(c) Permissible variation in wall thickness shall be as follows:-:
Table 2/26: For grade X20CrMoV121
Serial No. Outside diameter (mm) Permissible variation %
Over Under
(1) (2) (3) (4)
1. 100 and under 12.5 10
2. Over 100 to 320 incl. 12.5 12.5
3. Over 320 15.0 12.5
Table 2/27: For grade N06617
Serial No. Outside diameter (mm) Permissible Variation (mm)
Over Under
(1) (2) (3) (4)
1. Seamless Cold-worked pipes
2. Over 10 and less than 16 15.0 15.0
3. 16 - 38 10.0 10.0
4. Over 38 - 76 10.0 10.0
5. Over 76 to 114 10.0 10.0
6. Over 114 to 152 12.5 12.5
7. Over 152 to 168 12.5 12.5
8. Over 168 to 219 12.5 12.5
9. Hot finished pipes
10. 64 to 114 16.0 12.5
11. Over 114 to 165 16.0 12.5
12. Over 165 to 235 16.0 12.5694 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Note: For all grades, except X20CrMoV121 and N06617, the minimum wall thickness
at any point shall not be more than 12.5% under the nominal wall thickness specified.
(d) Seamless Hot finished and Cold finished pipes can be ordered in specified length or in
random length. If ordered in specified length, the tolerances shall be as follows:
Table 2/28
Serial No. Grade Length (m) Permissible variation in (mm)
Over Under
(1) (2) (3) (4) (5)
1. All grades except All length 6 0
X20CrMoV121 and
N06617
2. For grade 6 and under 10 0
3. X20CrMoV121 Over 6 to 12 15 0
incl.
Table 2/29: For grade N06617
Permissible variation in Length (mm)
Serial No. Outside Diameter of pipe
(mm) Over Under
(1) (2) (3) (4)
1. Under 50.8 3.2 0
2. 50.8 and over 4.8 0
(6) (a)Test specimen required for flattening and expanding orflaring test specified in sub-
regulationsherein belowshall be taken from ends of finished pipes prior to upsetting,
swaging, expanding or any other forming operations or being cut to lengthand they shall
be smooth on ends and free from burrs and flaws.
(b) If desirable and practicable, tensile test may be carried out on full section of the pipe
up to the capacity of the testing machineand for large size pipes, the tensile test
specimen shall consist of strip cut longitudinally from the pipe and which is not
straightened within the gauge length and further heat treated.
(c) If any test specimen shows flaws or defective machining it may be discarded and
another specimen substituted.
(d) All specimens shall be tested at room temperature.
(7) The tests specified in sub-regulations below shall be made on minimum 2 pipes for first
100 pipes and 1 per 100 or part thereof for pipes over 100 numbers from each lot. Lot
applies to all pipes of same nominal size and wall thickness of same heat and heat
treatment.
(8) (a)The tensile test may be carried out on the test pieces cut out from the pipe in the
longitudinal direction which shall not be further heat treated nor straightened within the
gauge length. As an alternative, pipes may be tested on full cross section.
(b)Test pieces cut from the ends of the selected pipes shall comply with the
requirementsspecified in this sub-regulation.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 695
Table 2/30
Serial No. Grade Yield Strength Tensile Strength %Elongation
MPa (kg/mm2) MPa (kg/mm2) on G.L.= 50 mm min *
min Min for full tube testing
(1) (2) (3) (4) (5)
1. SA 106 Gr A 205 (21.1) 330 (33.1) 35
2. SA 106 Gr B 240 (24.7) 415 (42.2) 30
3. SA 106 Gr C 275 (28.2) 485 (49.3) 30
*The tensile test specimen shall be as per the relevant material specifications.
Note:For longitudinal strip test, the minimum required elongation shall be determined
by the following equation:
e = 1940 (A 0.2/U0.9)
Where e = minimum elongation in 50.8 mm, % rounded to the nearest 0.5%.
A = cross sectional area of the tensile test specimen in mm2 based on specified
outside diameter or nominal specimen width and specified wall thickness rounded to
the nearest 6.45 mm2. If the area thus calculated is more than 484 mm2 then use
area as 484 mm2. If the calculated area is less than 484 mm2 then use the actual
area thus obtained.
U = specified tensile strength in MPa.
Table 2/31: Mechanical Property Requirements for Alloy Steels
Serial Grade Yield Strength Tensile Strength % elongation on
No. MPa (kg/mm2) MPa (kg/mm2) GL= 50 mm min *
min min
(1) (2) (3) (4) (5)
1. SA 335 Gr P1 205 (21.1) 380 (38.7) 30
2. SA 335 Gr P2 205 (21.1) 380 (38.7) 30
3. SA 335 Gr P5 205 (21.1) 415 (42.2) 30
4. SA 335 Gr P9 205 (21.1) 415 (42.2) 30
5. SA 335 Gr P11 205 (21.1) 415 (42.2) 30
6. SA 335 Gr P12 220 (22.5) 415 (42.2) 30
7. SA 335 Gr P22 205 (21.1) 415 (42.2) 30
8. SA 335 Gr P91 415 (42.2) 585 (59.8) 20
690 (70.4)
9. X20CrMoV121 490 (50.0) 17
840 (85.6)
655 (66.8)
10. SB 167 N06617 240 (24.5) 35
*The tensile test specimen shall be as per the relevant material specifications.
(9) For pipes of outside diameter 60.3 millimetre(mm) and under, a bend test shall be
conducted. A sufficient length of pipe shall stand being bent cold through 90° around
a cylindrical mandrel, the diameter of which is 12 times the nominal diameter of the
pipe, without developing cracks.696 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Provided that bend test shall berequired for grade N06617.
(10) (a) For pipes of outside diameter over 60.3 mm, a flattening test shall be
conductedand a section of the pipe not less than 63 mm in length shall be flattened
cold between two parallel flat surfaces to a distance between the plates (H) as
calculated by the formula given below, without showing any sign of a crack or flaw:
(1 + e) t
H = -----------
e + t/D
where, t = specified thickness of pipe (mm)
D = specified outside diameter of the pipe (mm)
e = a constant, as given below
e = 0.07 for Carbon steel with maximum specified carbon above 0.18%
e = 0.09 for Carbon steel with maximum specified carbon 0.18% or less.
e = 0.08 for alloy steel
(b) For pipe whose diameter equals or exceeds 254 mm, a bend test may be
conducted instead of the flattening test. The bend test specimens shall be bent
at room temperature through 180° without cracking on the outside of the bent
portion. The inside diameter of the bend shall be 25 mm. Substitution of the bend
test for the flattening test shall be subject to the approval of the purchaser.
(c)For pipe whose diameter exceeds 635 millimetre(mm) and whose diameter to wall
thickness ratio is 7.0 or less, the bend test described in sub-regulation (9) shall
be conducted instead of the flattening test.
Provided that flattening test shall berequired for grade N06617.
(11)(a) If any one or more tests specified in these regulations fail, two further tests of the
same kind may be made on two other pipes of the same batchand if any of these
tests fails, the batch of the pipes represented may be given a further heat treatment
and entire set of tests shall be repeated.
(b) If the repeat tests are satisfactory the pipes shall be acceptedand in case of any
failure in the tests, the entire batch of the pipes shall be rejected.
(12) (a) Each pipe shall be tested by the manufacturer and shall withstand a
hydraulic pressure to one and half time the design pressure, but not greater than
pressure calculated by the formula given below and in the absence of working
pressure indicated in the Test Certificate then the test pressure indicated in the Test
Certificate divided by 1.5 shall be the maximum working pressure:
P = 2St/D
Where, P = test pressure
D = specified outside diameter of the pipe
t = specified wall thickness of the pipe[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 697
S = stress which shall be taken as 40% of the minimum tensile
strength at room temperature.
(b) Despite anything contained in the clause (a) above, the hydraulic test at the
maker's works may be dispensed with, provided that the pipes are subject to non-
destructive testing by an appropriate method like Ultrasonic or Eddy Current or
Stray flux testing.
PART-V
50.Castings of carbon, alloy and stainless steel.–(1) This regulation shall cover carbon,
alloy and stainless steel castings used in the construction of boilers and steam pipes,
including their fittings.
(2) (a) All castings shall be supplied in the heat-treated conditionas following:-
(i) carbon steel castings: annealing, or normalising, or normalising and tempering.
(ii) alloy steel castings: annealing, or normalising and tempering, or hardening
orquenching and tempering.
(iii) stainless steel castings: solution annealing.
(b) Heat treatment shall be carried out either at the discretion of the manufacturer or
the Competent Person and shall be carried out at suitable temperatures to give
the mechanical properties specified in regulation 54.
(3) All castings shall be properly fettled and dressed and all surfaces shall be
satisfactorily cleaned for inspection purposes.
(4) The castings can be supplied as cast, rough machined or after final machining. The
Non-Destructive Testing may be performed in as cast or in machined condition as
per the non-destructive examination(NDE)requirements of relevant material
specifications.
51. Process of manufacture.– (1) The steel used for castings shall be made by an Open
Hearth or Electric Furnace or any other process which gives steel having equivalent
properties.
(2) The steel shall comply with the chemical composition specified in the Table 2/32.698 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Table 2/32: Chemical composition (%)
Serial No. Carbon( Mangane Phosphor Sulphur(S Silicon(Si Chromiu Molybden Vanadium Nitrogen
Grade Nickel(Ni) Others
C) se(Mn) us(P) ) ) m(Cr) um(Mo) (V) (N)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
1.
SA 352 LCB 0.30 1.00 0.04 0.045 0.60 0.50 0.50 0.20 0.03 - Cu-0.30
2.
SA 216 WCB 0.30 1.20 0.04 0.045 0.60 0.50 0.50 0.20 0.03 - Cu-0.30
3.
SA 216 WCC 0.25 1.20 0.04 0.045 0.60 0.50 0.50 0.20 0.03 - Cu-0.30
4.
SA 352 LCC 0.25 1.20 0.04 0.045 0.60 0.50 0.50 0.50 0.03 Cu-0.30
5. 0.05– Cu-0.50
SA 217 WC6 0.50–0.80 0.04 0.045 0.60 1.00–1.50 0.50 0.45–0.65 - -
0.20 W-0.10
6.
0.05– Cu-0.50
SA 217 WC9 0.40–0.70 0.04 0.045 0.60 2.00–2.75 0.50 0.90–1.20 - -
0.18 W-0.10
7.
Nb- 0.060–0.10
0.08– 0.030– Al- 0.02
SA 217 C12A 0.30–0.60 0.030 0.010 0.20–0.50 8.0–9.5 0.40 0.85–1.05 0.18–0.25
0.12 0.070 Ti- 0.01
Zr- 0.01
8.
SA 351 CF8 0.08 1.50 0.040 0.040 2.00 18.0-21.0 8.0-11.0 0.50 - - -
9. SA 351
0.08 1.50 0.040 0.040 1.50 18.0–21.0 9.0–12.0 2.0–3.0 - - -
CF8M
10.
SA 351 CF8C 0.08 1.50 0.040 0.040 2.00 18.0–21.0 9.0-12.0 0.50 - - -
Note: 1. Maximum when single values specified
2. A carbon content not exceeding 0.3% may be subjected to the agreement between the boiler maker and the inspecting Authority.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 699
52. Freedom from and rectification of defects.–The steel castings shall have clean
surfaces and shall be free from defectsand the specified permissible variations in size or
thickness shall not be exceeded. Defects may be repaired by welding only, with the
approval of the Inspecting Authority provided that the castings are stress-relieved after
welding if necessary.
53. Number of testsand provision of test samples.–Tensile and bend test pieces shall be
prepared from test samples representative of each melt or heat-treatment batch as
following:-
(i) (a)The test samples shall be cast attached to or separate from the castings as
agreed between the manufacturer and the Competent Person.
(b) The agreement for attached test samples shall include the precise location and
method of attachment. If the Competent Person fails to make such an agreement
with the manufacturer, the decision as to the manner of providing test samples shall
rest with the manufacturer.
(c)The discretion of the manufacturer shall not, however, apply to the testing of
castings made from more than one melt as indicated in sub-regulation(4) below.
(ii) (a)If the test samples are attached to the castings, at least one tensile test, and
when required one bend test, shall be made from each melt.
(b) Such test samples shall not be detached from the castings until heat-treatment
of the castings has been completed and they have been stamped by the Competent
Person.
(c) Test samples shall be stamped by the Competent Person after that heat-
treatment process.
(iii) (a)If the test samples are cast separately, they shall be provided to the extent of 2
per cent of the number of castings from each melt, but in no case there shall be less
than 2 samples per melt, except by agreement between the manufacturer and the
Competent Person.
(b) The test samples shall be cast in moulds of the same material as is used for the
castings and shall be made at the same time as the castings, and run from the
same ladle.
(c) The samples shall be stamped by the Competent Person so as to identify the
castings to which they relate.
(iv) (a)When a casting is made from more than one melt, at least four tensile tests, and
where required four bends tests, shall be made from test samples situated as far
apart as possible on the casting.
(b) Some of the test samples shall be taken from as near the top and others near
from the bottom of the casting as is practicable.
(v) Test samples shall be heat-treated with the castings they represent.
54. Tensile test.– (1) The upper yield point at room temperature shall be not less than fifty
percent of the specified minimum tensile strength at room temperature.
(2) The minimum value of stress at proof limit of 0.2% at elevated temperature (E) of the
t
material may be calculated by multiplying the minimum specified tensile strength at
room temperature (R ) by the value of ratio E/R given in Table 2/5 under regulation
20 t 20
37.700 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) If, however, the tensile tests are carried out on specimen conforming to any other
standards, the material will be accepted provided the tensile strength and elongation
computed on the basis of the dimensions of the test pieces under the regulation shall
conform to the above requirements.
(4) The test specimen shall comply with the requirements given below:
Table 2/33
Serial No. Grade Mechanical Properties (minimum, when single value specified)
TS YS % Elongation on
MPa (kg/mm2) MPa (kg/mm2) GL = 50 mm
min*.
(1) (2) (3) (4) (5)
1. SA 352 LCB 450-620 (45.8-63.2) 240 (24.5) 24
2. SA 216 WCB 485 to 655 (49.5-66.8) 250 (25.5) 22
3. SA 216 WCC 485 to 655 (49.5-66.8) 275 (28) 22
4. SA 352 LCC 485-655 (49.5-66.8) 275 (28) 22
5. SA 217 WC6 485-655 (49.5-66.8) 275 (28) 20
6. SA 217 WC9 485-655 (49.5- 66.8) 275 (28) 20
7. SA 217 C12A 585-760 (59.6-77.5) 415 (42.3) 18
8. SA 351 CF8 485 (49.5) 205 (21) 35
9. SA 351 CF8M 485 (49.5) 205 (21) 30
10. SA 351 CF8C 485 (49.5) 205 (21) 30
*The tensile test specimen shall be as per the relevant material specifications.
55. Bend tests.–(1)Cold bend tests shall be made upon test pieces having rectangular
section of 25 mm wide by 19 mm thick.
(2) The test pieces shall be machined and the edges rounded to a radius of 1.6 mmand shall
be bent over the thinner section.
(3)Bend tests may be made by pressure or by blows, and the test pieces shall without
fracture withstand being bent round a former having a radius of 25 mm through an angle not
less than that given in the Table 2/34.
Table 2/34
Serial No. Grade of Casting Angle of Bend minimum
(1) (2) (3)
1. M1 Group 1 & 2 M3 Group 1 & 2, 120°
M4 Group1
2. M5A Group1, M5B Group1, 90°
M15E Group1
3. M8 Group 1 & 2 and M43 No test
(4) Alternatively, the specimen preparation for bend test, test method and acceptance criteria
may conform to the relevant material specifications.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 701
56. Additional Tests.–(1)(a)In case any of the original test pieces fail to pass the
mechanical tests, two further samples which represent the same castings shall be selected
and tested in the same manner.
(b) The manufacturer shall have the right, if he so desires to re-heat-treat the castings
before the two further samples are selected.
(c)In case the two further test satisfy the requirements of this standard, castings represented
by them shall be accepted and in case either of the re-tests fail, the castings represented
shall be liable to rejection.
(2) The Competent Person may call for hardness testing of the heat-treated castings.
(3) (a)(i)The Competent Person may call for radiographic examination or other non-
destructive testing of the castingsandCastingsfound to be unsound may be treated in
accordance with regulation 52.
(ii) If the welding repairs are sanctioned by the Competent Person, they shall be carried
out in accordance with regulation 57.
(b) High class Castings for which a factor greater than 80% is taken in computation of
permissible working stress shall be subject to the following inspection requirements,
namely:
(i) (a)Each casting shall be examined by radiographic or ultrasonic methods at all critical
locations and found free from harmful defects.
(b) All the castings shall be fully machined to such an extent that all critical sections
are exposed for full thickness.
(ii) All castings shall be examined at all critical locations using magnetic-particle or
penetrant-fluid procedure, or by grinding or machining and etching.
(iii) (a)Castings found to be defective shall be rejected by the Inspecting Authorityor
repaired to its satisfaction.
(b) If repairs by welding are carried out, the castings shall be subsequently stress-
relieved or heat treated.
(c)Castings found to be unsound may be treated in accordance with regulation 57.
(d)Repaired areas of castings shall be re-examined by the Competent Person in
accordance with sub-clause (i)of this sub-regulation and shall be shown to be free
from harmful defects.
(iv) Castings to which a quality factor of 0.90 is assigned shall be clearly and
permanently marked with ‗G‘ suitable symbol after being examined as above and
found satisfactory.
(4) The provisions of clause(a)of sub-regulation 3shall apply to the castings other than high
class castings for which a factor greater than 80% is used in the computation of
permissible working stress for shells of Boiler and integral super-heater Drums and
Headers under regulation 170.702 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
57. Procedure for welding.–(1)In order to maintain a high standard of workmanship in the
practice of arc-welding repair to steel castings, a written down procedure taking care of the
following requirements shall be followed.
(2) (a) The surfaces of the steel, it is intended to weld shall be cleaned and freed from all
foreign matter, otherwise it may resultinpoor penetration and unsoundweld metal.
(b) The preparation for the welding of cracks shall be of the U or V types. When the later
is used, the included angle shallbe not less than 70. Where cracks extend through
the section of the casting, the choice between single and double preparation, U or V
will be governed by:
(i) the thickness of the casting;
(ii) the location of the defect. In double preparation, U or V the root of the U or V
should be sufficiently open to ensure complete penetration.
(3) The selection of electrodes shall be compatible with the relevant material groups. The
electrode manufacturer‘s recommendations for the use of the electrode shall be strictly
followed.
(4) Variations in composition, mass design and the extent of welding required make it
impossible to lay down specific rules to establish conditions under which pre-heating
should be applied.When after consideration of each casting in the light of the above
variables it is deemed necessary to pre-heat, such pre-heating should be carried out at a
temperature of 150°C-300°C.
(5) (a)When the welding is carried out after the casting has received its normal heat
treatment, a further heat treatment may be considered necessary. This treatment need
be applied only in cases where welding has been such as to induce either internal
stresses which would be detrimental to the casting, or locally hardened areas which
would cause difficulty in machining. Where this further beat treatment is applied, the
casting, where possible, should not be allowed to go cold after welding, but should be
charged into a warm furnace and re-heated to a suitable tempering temperature which in
general should be not less than 550°C.
(b) When considering the advisability of applying this further treatment, its effect on the
physical properties of the castings shallbe borne in mind. If the treatment, or the welding
itself is such that the physical properties will be adversely affected, the full heat treatment
required to produce satisfactory qualities shallbe substituted.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 703
PART-VI
58.Forgingsof carbon, alloy,stainless steelandnickel alloys.–(1) The steel used for the forgings shall be made by an Open Hearth or
Electric or basic Oxygen process or by any other process which gives steel having equivalent properties.
(2) (a)The steel shall not contain more than 0.05 per cent of sulphur or of phosphorus.
(b) The steel shall comply with the chemical composition specified in the Table 2/35.
Table 2/35: Chemical composition (%)
Serial Carbon Manganes Phosphorus Sulphur(S) Silicon(Si) Chromium( Nickel(Ni) Molybdenu Vanadium Nitrogen (N) Others
Grade
No. (C) e(Mn) (P) Cr) m(Mo) (V)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
1. SA 266 Gr1 0.30 0.40–1.05 0.025 0.025 0.15–0.35 - - - - - -
2. SA 266 Gr2 0.30 0.40–1.05 0.025 0.025 0.15–0.35 - - - - - -
3. SA 266 Gr3 0.35 0.80–1.35 0.025 0.025 0.15–0.35 - - - - - -
4. SA 350 LF1-Note 4 Nb-0.02
0.30 0.60–1.35 0.035 0.040 0.15–0.30 0.30 0.40 0.12 0.08 -
Cu-0.04
5. SA 350 LF2-Note 4 Nb-0.02
0.30 0.60–1.35 0.035 0.040 0.15–0.30 0.30 0.40 0.12 0.08 -
Cu-0.04
6. SA 105 - Note 4 0.35 0.60–1.05 0.035 0.040 0.10–0.35 0.30 0.40 0.12 0.08 - Cu-0.4
7. SA 182 F1 0.28 0.60–0.90 0.045 0.045 0.15–0.35 - - 0.44–0.65 - - -
8. SA 182 F2 0.05–0.21 0.30–0.80 0.040 0.040 0.10–0.60 0.50–0.81 - 0.44–0.65 - - -
9. SA 182 F11 Cl 1 0.05–0.15 0.30–0.60 0.030 0.030 0.50–1.00 1.00–1.50 - 0.44–0.65 - - -
10. SA 182 F11 Cl 2 0.10–0.20 0.30–0.80 0.040 0.040 0.50–1.00 1.00–1.50 - 0.44–0.65 - - -
11. SA 182 F11 Cl 3 0.10–0.20 0.30–0.80 0.040 0.040 0.50–1.00 1.00–1.50 - 0.44–0.65 - - -
12. SA 182 F12 Cl 1 0.05–0.15 0.30–0.60 0.045 0.045 0.50 0.80–1.25 - 0.44–0.65 - - -
13. SA 182 F12 Cl 2 0.10–0.20 0.30–0.80 0.040 0.040 0.10–0.60 0.80–1.25 - 0.44–0.65 - - -
14. SA 182 F22 Cl 1,3 0.05–0.15 0.30–0.60 0.040 0.040 0.50 2.00–2.50 - 0.87–1.13 - - -
15. SA 182 F5 0.15 0.30–0.60 0.030 0.030 0.50 4.0–6.0 0.50 0.44–0.65 - - -
16. SA 182 F9 0.15 0.30–0.60 0.030 0.030 0.50–1.00 8.0–10.0 - 0.90–1.10 - - -
17. Nb-0.06–0.10; Al
SA 182 F91 0.08–0.12 0.30–0.60 0.020 0.010 0.20–0.50 8.0–9.5 0.40 0.85–1.05 0.18–0.25 0.03–0.07 0.02
Ti 0.01; Zr 0.01
18. SA 182 F304 0.08 2.00 0.045 0.030 1.00 18.0–20.0 8.0-11.0 - - 0.10 -704 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
19. SA 182 F304H 0.04–0.10 2.00 0.045 0.030 1.00 18.0–20.0 8.0–11.0 - - - -
20. SA 182 F304L 0.030 2.00 0.045 0.030 1.00 18.0–20.0 8.0–13.0 - - 0.10 -
21. SA 182 F316 0.08 2.00 0.045 0.030 1.00 16.0-18.0 10.0-14.0 2.0-3.0 - 0.10 -
22. SA 182 F316H 0.04-0.10 2.00 0.045 0.030 1.00 16.0-18.0 10.0-14.0 2.0-3.0 - - -
23. SA 182 F316L 0.030 2.00 0.045 0.030 1.00 16.0-18.0 10.0-15.0 2.0-3.0 - 0.10 -
24. SA 182 F321 0.08 2.00 0.045 0.030 1.00 17.0-19.0 9.0-12.0 - - - J
25. SA 182 F321H 0.04-0.10 2.00 0.045 0.030 1.00 17.0-19.0 9.0-12.0 - - - K
26. SA 182 F347H 0.04–0.10 2.00 0.045 0.030 1.00 17.0–20.0 9.0–13.0 - - - M
27. SA 234 WPB-Note 2 0.30 0.29–1.06 0.050 0.058 0.10 min 0.40 0.40 0.15 0.08 - -
28. SA 234 WPC 0.35 0.29–1.06 0.050 0.058 0.10 min 0.40 0.40 0.15 0.08 - -
29. SA 234 WP11 Cl 1 0.05–0.15 0.30–0.60 0.030 0.030 0.50–1.00 1.00–1.50 - 0.44–0.65 - - -
30. SA 234 WP12 Cl 1 0.05–0.20 0.30–0.80 0.045 0.045 0.60 0.80–1.25 - 0.44–0.65 - - -
31. SA 234 WP22 Cl 1 0.05–0.15 0.30–0.60 0.040 0.040 0.50 1.90–2.60 - 0.87–1.13 - - -
32. SA 234 WP5 Cl1 0.15 0.30–0.60 0.040 0.030 0.50 4.0–6.0 - 0.44–0.65 - - -
33. SA 234 WP9 Cl1 0.15 0.30–0.60 0.030 0.030 1.00 8.0–10.0 - 0.90–1.10 - - -
34. SA 234 WP91 0.08–0.12 0.30–0.60 0.020 0.010 0.20–0.50 8.0–9.5 - 0.85–1.05 - - -
35. SA 336 F11 Cl 1 0.05–0.15 0.30–0.60 0.025 0.025 0.50–1.00 1.00–1.50 - 0.44–0.65 - - -
36. SA 336 F11 Cl 2,3 0.10–0.20 0.30–0.80 0.025 0.025 0.50–1.00 1.00–1.50 - 0.45–0.65 - - -
37. SA 336 F12 0.10–0.20 0.30–0.80 0.025 0.025 0.10–0.60 0.80–1.10 - 0.45–0.65 - - -
38. SA 336 F5 0.15 0.30–0.60 0.025 0.025 0.50 4.0–6.0 0.50 0.45–0.65 - - -
39. SA 336 F9 0.15 0.30–0.60 0.025 0.025 0.50–1.00 8.0–10.0 - 0.90–1.10 - - -
40. SA 336 F91 Nb-0.06–0.10; Al-
0.08–0.12 0.30–0.60 0.025 0.025 0.20–0.50 8.0–9.5 0.40 0.85–1.05 0.18–0.25 0.03–0.07 0.02
Ti-0.01; Zr-0.01
41. SB 564 N06617 0.05-0.15 1.0 - 0.015 1.0 20.0-24.0 44.5 min 8.0-10.0 - - Co:10.0-15.0;
SB 166 N06617 Fe:3.0; Al: 0.8-1.5;
Cu:0.5; Ti:0.6;
B:0.006
Note: 1. Maximum when single values specified
2. For SA 234 WPB, Fittings made from bar or plate may have 0.35 max carbon.
3. For SA 234 WPB & SA 234 WPC Fittings:
(i) The sum of copper, nickel, chromium, molybdenum and vanadium shall not exceed 1.00%.
(ii) Fittings made from forgings may have 0.35 max carbon and 0.35 max silicon with no minimum[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 705
(iii) For each reduction of 0.01 % below the specified carbon maximum, an increase of 0.06 % manganese above the
specified maximum will be permitted, up to a maximum of 1.65 %.
4. For SA 350 LF1, LF2 & SA 105 Forgings
(i)The sum of chromium and molybdenum shall not exceed 0.32%.
(ii) The sum of copper, nickel, chromium, molybdenum and vanadium shall not exceed 1.00%.
5. J Grade F 321 shall have a titanium content of not less than five times the carbon content and not more than 0.70 %.
K Grade F 321H shall have a titanium content of not less than four times the carbon content and not more than 0.70 %.
M Grades F 347H shall have a columbium content of not less than eight times the carbon content and not more than 1.10 %.706 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) Heat treatment shall be as per relevant material specifications.
(4) Where not machined, the forgings, shall have workman like surfaces as normally
obtained by rolling, forging or drawing.
Provided that the minimum required thickness is maintained, minor surface defects
may be admitted and other defects removed by mechanical means so as to achieve a
smooth surface. Surface defects may also be repaired, by welding only, with the
approval of the Inspecting Authority provided that the parts are stress-relieved after
welding where necessary.
59. Selection of test pieces.–(1) For testing, either the parts themselves shall be used or
additional material or sufficient size for test pieces shall be available. In the case of headers
for examples, surplus lengths for test rings may be used. In the case of flanges swaged in
dies, the punching left may be used as test pieces, in which case the identity of the material
of the punching with that of the flange shall be evidenced in an adequate manner. The test
may be performed also on the semi-finished material for example a bar or a billet, provided it
is given approximately the same reduction and heat-treatment as the finished forging. For
headers with closed ends, the test rings shall be cut off before dishing or reducing and shall
be subjected to the same heat treatment as the headers themselves. In the case of
headers, which are closed by special covers, the test ring shall be cut off after heat
treatment. Similar procedure shall be followed for test pieces of other forgings.
(2) For testing, piece of one and the same cast of the same heat treatment batch as well as
of similar dimensions may be gathered into one group and at least one test piece shall
be made from each group.
(3) Tangential test piece shall be used for headers where practicable. For header with
outside diameter less than 200 mm, longitudinal test pieces may be allowed.
60. Tensile strength.–(1) The tensile strength of the material shall conform with mechanical
properties asper Table 2/36 of this sub-regulation.
Table 2/36
Serial Grade Mechanical Properties (minimum, when single value specified)
No. TS YS % Elongation on
MPa (kg/mm2) MPa (kg/mm2) GL = 50 mm
min*.
(1) (2) (3) (4) (5)
1. SA 266 Gr1 415-585 (42.3–59.6) 205 (21) 23
2. SA 266 Gr2 485–655 (49.5–66.8) 250 (25.5) 20
3. SA 266 Gr3 515–690 (52.5–70.4) 260 (26.5) 19
4. SA 350 LF1 415-585 (42.3–59.6) 205 (21) 25
5. SA 350 LF2 485-655 (49.5-66.8) 250 (25.5) 22
6. SA 105 485 (49.5) 250 (25.5) 30
7. SA 182 F1 485 (49.5) 275 (28) 20
8. SA 182 F2 485 (49.5) 275 (28) 20
9. SA 182 F11 Cl 1 415 (42.3) 205 (21) 20
10. SA 182 F11 Cl 2 485 (49.5) 275 (28) 20[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 707
11. SA 182 F11 Cl 3 515 (52.5) 310 (31.6) 20
12. SA 182 F12 Cl 1 415 (42.3) 220 (22.4) 20
13. SA 182 F12 Cl 2 485 (49.5) 275 (28) 20
14. SA 182 F22 Cl 1 415 (42.3) 205 (21) 20
15. SA 182 F22 Cl 3 515 (52.5) 310 (31.6) 20
16. SA 182 F5 485 (49.5) 275 (28) 20
17. SA 182 F9 585 (59.6) 380 (38.7) 20
18. SA 182 F91 620 (63.2) 415 (42.3) 20
19. SA 182 F304 515 (52.5) 205 (21) 30
20. SA 182 F304H 515 (52.5) 205 (21) 30
21. SA 182 F304L 485 (49.5) 170 (17.3) 30
22. SA 182 F316 515 (52.5) 205 (21) 30
23. SA 182 F316H 515 (52.5) 205 (21) 30
24. SA 182 F316L 485 (49.5) 170 (17.3) 30
25. SA 182 F321 515 (52.5) 205 (21) 30
26. SA 234 WPB 415 (42.3) 240 (24.5) 22
27. SA 234 WPC 485 (49.5) 275 (28) 22
28. SA 182 F321H 515 (52.5) 205 (21) 30
29. SA 182 F347H 515 (52.5) 205 (21) 30
30. SA 234 WP11 Cl 415-585 (42.3–59.6) 205 (21)
22
1
31. SA 234 WP12 Cl 415-585 (42.3–59.6)
220 (22.4) 22
1
32. SA 234 WP22 Cl 415-585 (42.3–59.6) 205 (21)
22
1
33. SA 234 WP5 Cl1 415-585 (42.3–59.6) 205 (21) 22
34. SA 234 WP9 Cl1 415-585 (42.3–59.6) 205 (21) 22
35. SA 234 WP91 585–760 (59.6–77.5) 415 (42.3) 20
36. SA 336 F11 Cl 1 415-585 (42.3–59.6) 205 (21) 20
37. SA 336 F11 Cl 2 485–660 (49.5–67.3) 275 (28) 20
38. SA 336 F11 Cl 3 515–690 (52.5–70.4) 310 (31.6) 18
39. SA 336 F12 485–660 (49.5–67.3) 275 (28) 20
40. SA 336 F5 415-585 (42.3–59.6) 250 (25.5) 20
41. SA 336 F9 585–760 (60.7–77.5) 380 (38.7) 20
42. SA 336 F91 620–760 (63.2–77.5) 415 (42.3) 20
43. SB 564 N06617 655 (66.8) 241 (24.6) 35
SB 166 N06617
*The tensile test specimen shall be as per the relevant material specifications.
(2) The upper yield point at room temperature shall be not less than 50% of the specified
minimum tensile strength.
(3) The minimum values of the stress at proof limit 0.2% at elevated temperature (E) may
t
be calculated by multiplying the minimum specified tensile strength of the material at
room temperature (R ) by the value of the ratio Et/R given in the Table 2/5 under
20 20
regulation 37.708 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
61. Bend tests.─ (1)Bend test pieces shall be of rectangular cross-section machined to a
finished size of 25 mm wide by 19 mm thick. The edges shall be rounded to a radius of 1.6
mm. The test pieces shall be bent over the thinner section.
(2) Test pieces shall be bent when cold through an angle of 180° without fracture, the
internal radius of the bend being not greater than that specified in Table 2/37 for the 25 mm
wide by 19 mm thick test piece.
Table 2/37
Serial No. Grade of forging Internal radius of bend (mm)
(1) (2) (3)
1. M1 Group 1 & 2 M3 Group 1 & 2, M4 6.35
Group1
2. M5A Group1, M5B Group1, M15E 1.5 x thickness of test specimen
Group1 & M8 Group 1 & 2
3. M43 No test
Alternatively, the specimen preparation for bend test, test method and acceptance
criteria may conform to the relevant material specifications.
62. Additional tests before rejection.─ (1) In case either a tensile or a bend test fails, two
further tests of the type which failed may be made on test pieces out from the same forging.
If the results obtained from these retests are satisfactory, the forging shall be accepted,
provided that in other respects they fulfil the conditions laid down above for steel forgings. If
these retests do not give satisfactory results, the forgings represented may be re-heat-
treated together with the remainder of the test blocks and presented for further testing.
(2) In all cases where final retests do not give satisfactory results, the forgings represented
by the test pieces which fail shall be rejected.
PART-VII
63.GENERAL GREY IRON CASTINGS (GRADE A).─ (1) The castings shall be cast from
metal melted or refined in any metallurgical plant other than an iron ore smelting furnace, for
the use of which furnace permission in writing must be received from the Inspecting
Authority.
(2) The Composition of the iron as cast shall be left to the discretion of the manufacturer but
the maximum percentage of phosphorus or sulphur or both may be specified by the
Inspecting Authority, if it so desires.
(3) The castings shall be accurately moulded in accordance with the pattern or working
drawings supplied by the Inspecting Authority with the addition of such letters, figures or
marks as may be specified and the drawings shall include the tolerances specified in the
regulation.
(4) (a)The castings shall be sound, clean out of twist and free from blow holes distortion
and all surface and other defects.
(b) They shall be well dressed or fettled and shall be machinable by normal methods.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 709
64. Provision of test bars.─(1) Prior to testing, the Inspecting Authority shall state whether
it requires tensile or transverse tests, or both, and itmay also specify cast on bars where the
design of the casting and method of running permit.
(2)(a)When the test bars are cast separately they shall be poured at the same time
and from the same ladle, or metal as the casting or castings they represent.
(b) The number of test specified in regulation 69 shall be applicable to all castings of
each melt.
(3)When the bars are cast-on, the mould for the casting and the mould for the test
piece shall be joined together in such a manner that the liquid metal fills both moulds at the
same operation.
(4)All test bars shall be cast in green sand or dry sand or in loam moulds according
to whether the casting or castings they represent are moulded in green sand, or in loam or
dry sand, respectively.
(5) The test bars shall not be subjected to any heat treatment after leaving the
moulds.
65. Dimension of test bars.─ (1) (a)The Transverse test bars of the diameter specified by
the Inspecting Authority according to the main cross-sectional thickness of the casting
represented, shall conform to the following dimensions, namely:-
Table 2/38
Serial No. Diameter test Limits on Overall Main cross-sectional
Bar Diameter length thickness of casting
represented
(1) (2) (3) (4) (5)
1. mm mm. mm. mm.
2. 15 + 1 254 Not Exceeding 10
3. 22 + 1.7 381 Over 10 and not exceeding
19
4. 30 + 2 533 Over 19 and not exceeding
28
5. 40 + 2.5 533 Over 28 and not exceeding
41
6. 53 + 2.5 685 Over 41
(b)Bars cast to a size in excess of the limits given above may be machined to a diameter
within the specified limits.
(c)Bars cast within these limits of diameter may also be machined before the transverse test
is made, providing that the finished diameter falls within these limits.
(2) The tensile test bars of the diameter specified by the Inspecting Authority, according
to the main cross-sectional thickness of the casting represented shall conform to the
dimensions shown in the Table 2/39. Bars may be tested with either plain or
screwed ends.710 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
TABLE 2/39
Serial No. Diameter Gauge Area Min. Min. Min. Screwed ends Approximate minimum Main cross- sectional
as Cast diameter parallel radiu Length overall thickness of casting
length s of plain represented
ends
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
1. B D A P R C E F LP LS
2. mm. mm. Sq. mm. mm. mm. mm. mm. mm. mm. mm.
mm.
3. 15 10 80 25 38 38 13 S.P. 14 114 3 Not exceeding
14 S.F. 10
14 S.W
4. 22 14 161 50 89 38 19 S.F. 19 179 37 Over 10 and not
22 S.W. exceeding 19
5. 30 20 322 50 89 50 38 S.F. 38 210 149 Over 19 and not
38 S.W exceeding 38
6. 41 29 645 50 89 63 38 S.F 38 229 184 Over 38 and not
38 S.W. 184 exceeding 41
7. 53 41 1290 50 89 89 50 S.F 51 286 210 Over 41
The test bars shall be cast as parallel bars of the diameters given in column B and then machined to the dimensions C and P in the
Table 2/39.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 711
Fig. 2/1
(3) For castings ofover 51 mm in thickness, a test bar of diameter largerthan 53 mm may
be used by agreement between the manufacturer and the Inspecting Authority. For
diagram and table see Fig.2/1 and Table 2/39 under sub-regulation (2) of this
regulation.
66. Mechanical test.─(1)The casting shall comply with the transverse and tensile tests
specified in regulations 67 and 68.
(2) All test pieces shall be selected by the Competent Person and tested to his satisfaction.
67. Transverse test.─(1)A transverse test bar cast in accordance with sub-regulation (1) of
regulation 65 when placed on supports set at the distance shown in column 2 of Table
2/40mustsustain a load applied at the centre of not less than that shown in column 3 and
must show before rupture a deflection not less than that shown in column 4.
(2) The supports and the point of application of the load shall be rounded to a radius of not
less than 3 mm.
Table 2/40
Serial No. Diameter of test Distance Minimum Minimum
bar between support breaking load deflection Grade
Grade A A
(1) (2) (3) (4) (5)
1. mm. mm. kg mm.
2. 15 228 240 1.8
3. 22 305 538 2.5
4. 30 457 885 3.8
5. 40 457 1941 3
6. 53 610 3020 3.8
(3)If the diameter of a transverse test bar as cast varies within the limits specified in
sub-regulation (1) of regulation 65,the equivalent breaking load for the test bar of standard
diameter shall be calculated in accordance with the factors given in Appendix-B .712 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
68. Tensile test.─A tensile test bar machined to the dimensions shown insub-regulation (2)
of regulation 65 and tested with either plain or screwed ends must show a breaking strength
of not less than that shown in the Table 2/41:
Table 2/41
Serial No. Diameter of test bar Minimum ultimate tensile stress
– Grade A
(1) (2) (3)
1. mm. Kg/mm2
2. 15 17.5
3. 22 16.8
4. 30 15.5
5. 40 14.8
6. 53 14
Note: Self-aligning grips to ensure axial loading are recommended.
69. Number of transverse and tensile tests.─(1)The number of tests required for each
batch of castings shall be in accordance with the Table 2/42, and various classes of castings
divided into four representative groups.
(2) One test shall refer to one transverse and one tensile test, whether taken from one or two
test bars as cast.
Table 2/42
Serial Group Weight of Castings Test requirements
No.
(1) (2) (3) (4)
1. 1 Upto 13 kg One test for each 1524 kgs of castings or
part thereof.
2. 2 Over 13 kg. And upto 50 kg. One test for each 1814 kgs of castings or
part thereof
3. 3 Over 50 kg And upto 907 kg One test each 3629 kgs of castings or part
thereof.
4. 4 Over 907 kg and important One test for each 3629 kgs of castings or
castings where mutually agreed part thereof or for each casting weighing
upon. 3629 kgs or more.
In the above group 1, 2 and 3, all castings represented by one test shall be poured
from the same ladle or same heat as the bar or bars provided for the test.
70. Additional tests.─The additional tests shall be carried outin accordance with the Table
2/43 before a casting or batch of castings, if rejected:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 713
Table 2/43
Serial No. Test piece Event Conditions
(1) (2) (3) (4)
1. 1st If this fails The second test piece shall be tested.
2. 2nd If this passes The batch or separate casting
represented shall be accepted.
3. If this fails The batch or separate casting
represented may be rejected.
4. Provided that in the case of failure of both test pieces if either show obvious
defects a third test piece may be taken from a broken casting or a piece may be
cut from a unable casting for further testing as follows:
5. 3rd If this passes The batch or separate casting
represented shall be accepted.
6. If this fails The batch or separate casting
Represented may be rejected.
PART-VIII
71.COVERED ELECTRODES FOR SHIELDED METAL ARC WELDING.─(1)
(a)(i)Thisregulationshallapply to covered electrodes of sizes 2.0 mm and larger in diameter
for shielded metal arc welding of carbon steel, low alloy steels, stainless steels and non-
ferrous materials. (ii)Electrodesofless than 2.0 mm in diameter shall not be used in boilers.
(b) The covered electrode shall comply with the requirements specified in these
regulations.
(c) The characteristics and behaviour under ordinary working conditions shall be
such that satisfactory weld deposits can be made by a welder of average skill and
experience and that the following characteristics are obtained,namely:-
(i) relative ease in the control of the slag and weld metal during welding;
(ii) good degree of stability of the arc;
(iii) no undue degree of spatter;
(iv) desired rate of deposition and depth of penetration.
(v) easy removability of the slag;
(vi) no undue tendency to under-cut;
(vii) desired contour of the weld deposits: and
(viii) low internal porosity of the weld metal.
(2) The covered electrodes shall be classified into following categories and in
accordance with applicable Specifications for Filler Alloys (SFA) of American Society
of Mechanical Engineers (ASME) Part IIC specificationsor AWS (American Welding
Society) specifications or equivalent:
(a) Carbon steel electrodes
(b) Low alloy steel electrodes
(c) Stainless steel electrodes
(d) Nickel and nickel-alloy welding electrodes714 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) Covered electrodes may be made by any method that shall yield a product
conforming to the requirements of these regulations and relevant Specifications for
Filler Alloys (SFA)or American Welding Society (AWS) specification.
(4) (a)The nominal size of the covered electrodes shall refer to the diameter of the core
wire and the length shall not exceed 450 mm with provision for end gripping.
(b)The tolerance on the specified diameter of the core wire of the electrodes shall be
± 0.05 mm.
(c)The tolerance on the length of the electrodes shall be ±10 mm or as specified in
relevant Specifications for Filler Alloys (SFA)or American Welding Society (AWS)
specifications.
(5) (a)The core wire and covering shall be free from defects that would interfere with the
uniform deposition of electrode.
(b)The flux covering shall be sufficiently robust to withstand the normal conditions of
transport, storage, handling and use, without damage and shall be uniform in
thickness all over so that it fuses evenly.
(c) The covering shall be concentric with coreand the permissible variation on
maximum core plus one covering shall not exceed the minimum core plus one
covering as under:
(i) For diameter up to 2.5 mm 7 % of mean dimension,
(ii) For diameter 3.2 to 4.0 mm 5 % of mean dimension, and
(iii) For diameter 5 mm and larger 4 % of mean dimension.
(6) At least one imprint of electrode classification shall be imprinted at the covering
within 65 mm of grip end. The imprinting shall be legible both before and after
welding.
(7) (a)Covered electrodes shall be suitably packed to guard against damage during
transportation. When stored, the electrodes shall be kept in their original bundles or
packing in a dry store room and under such conditions, the electrodes shall be
capable of giving results similar to those which they would have given on the date of
their dispatch from the manufacturer for a period of two years or as recommended by
the electrode manufacturer whichever is less. Usage of electrodes beyond this period
may be permitted after conducting check tests as per specification, provided it is not
restricted by the electrode manufacturer.
(b)Each package shall be marked with the following information.
(i) Name of the Manufacturer.
(ii) Trade name / Brand name of the electrodes.
(iii) Size and quantity of electrodes.
(iv)Batch Number and date of manufacture.
(v)Recommended current range.
(vi)AWS Classification.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 715
(8) (a) The electrodes shall be subjected to initial tests and periodic check tests to
ensure that the requirements of these regulations are fulfilled.
(b) Electrodes intended for use with more than one type of current or polarity
shall be tested using each type of current and polarity shall be tested using each
type of current and polarity.
(c) Where any test specimen fails to satisfy the requirements of any particular
test, two further test specimens shall be prepared using the electrodes from the
same batch and submitted to the same test.
(d) The batch of electrodes shall be accepted as having passed the test provided
that the tests of both the additional specimens are satisfactory.
(9) Test certificate provided by the manufacturer of covered electrode shall fulfil the
requirements of the specification.The manufacturers, when called upon, shallproduce
the results of the most recent periodic check test carried out within the preceding 12
months, for electrodes supplied.
PART-IX
72.RODS AND ELECTRODES FOR GAS SHIELDED ARC
WELDING.─(1)(a)Thisregulation apply to electrodes and rods of sizes 0.8 mm and larger in
diameter for gas shielded arc welding of carbon steels, low alloy steels, stainless steels and
nonferrous materials used in these regulations.
(b) The rods and electrodes shall comply with thisregulation and the applicable requirements
of AWS or SFA specifications.
(c) Their characteristics and behaviour under ordinary working conditions shall be such that
satisfactory weld deposits can be made by a welder of average skill and experience with
following characteristics.
(d) The rods and electrodes shall be suitable for manual, semi-automatic and machine
welding.
(i) relative ease in the control of the molten pool during welding;
(ii) desired degree of stability of the arc;
(iii) no undue degree of spatter;
(iv) desired rate of deposition and depth of penetration.
(v) no undue tendency to under-cut;
(vi) desired contour of the weld deposits: and
(vii) low internal porosity of the weld metal.
(2) The electrodes and rods shall be classified intofollowing four categories, namely:-
(a) Carbon steel Electrodes and rods;
(b) Low-alloy steel electrodes and rods;
(c) Stainless steel electrodes and rods; and
(d) Nickel and nickel-alloy welding electrodes and rods716 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) Electrodes and rods shall be made by any method to yield a product conforming to
the requirements of these regulations and relevant Specifications for Filler Alloys
(SFA) or American Welding Society (AWS) specification.
(4) The size and tolerance of the electrodes and rods for straight length and coils form
shall meet the appropriate Specifications for Filler Alloys (SFA) or American Welding
Society (AWS)specification.
(5) (a)The rods and electrodes shall have smooth finish and reasonably free from slivers,
depressions, scratches, scale, seams, laps and foreign matter so that these do not
affect the properties of the weld metal.
(b)The core ingredients shall be uniformly distributed throughout the length of the
electrode ensuring consistent weld metal properties.
(6) (a)Coils, spools and drums, containing electrodes shall have tag or label suitably and
securely affixed with suitable information.
(b) Rods shall have at least one imprint for positive identification of Specifications for
Filler Alloys (SFA) or American Welding Society (AWS)specification.
(7) (a)Electrodes and rods shall be suitably packed to guard against damage during
transportation.
(b) Product information shall be legibly marked on each package.
(8) Each package shall be marked with the following information, namely:-
(a) Name of the Manufacturer;
(b) Trade name / Brand name of the electrodes;
(c) Size and quantity of electrodes;
(d) Lot, Control or heat number;and
(e) American Welding Society (AWS) Classification
(9) (a)The electrodes and rods shall be subjected to initial tests and periodic check tests
to ensure that the requirements of these regulations are fulfilled.
(b) Electrodes and rods intended for use with more than one type of gas shall be tested
using each type of gases.
(c) Where any test specimen fails to satisfy the requirements of any particular test, two
further test specimens shall be prepared using the electrodes from the same batch
and submitted to the same test.
(d) The batch of electrodes shall be accepted as having passed the test provided that
the tests of both the additional specimens are satisfactory.
(10) (a)Test certificate provided by the manufacturer of electrodes and rods shall fulfil the
requirements of the specification.
(b) The manufacturers, when called upon, shallproduce the results of the latest
Periodic check test carried out within the preceding twelve months, for electrodes
and rods supplied.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 717
PART-X
73.ELECTRODES FOR FLUX CORED ARC WELDING.─(1)(a)Thisregulation apply to
electrodes for flux cored arc welding either with or without shielding gas.
(b) The electrodes shall be suitable for flux cored arc welding of carbon steels, low alloy
steels, stainless steels and nonferrous materials used in these regulations.
(c) The electrodes shall comply with the applicable requirements of AWS or SFA
specification. (d)Their characteristics and behaviour under ordinary working conditions shall
be such that satisfactory weld deposits can be made by a welder of average skill and
experience and that the following characteristics are also obtained.
(e)The electrodes shall be suitable for manual, semi-automatic and machine weldingas per
following parameters,-
(i) relative ease in the control of the molten pool during welding;
(ii) desired degree of stability of the arc
(iii) no undue degree of spatter;
(iv) desired rate of deposition and depth of penetration.
(v) no undue tendency to under-cut;
(vi) desired contour of the weld deposits
(vii) low internal porosity of the weld metal and
(viii) desired degree of slag removal
(2) The electrodes shall be classified into following four categories, namely:-
(a) Carbon steel Electrodes;
(b) Low-alloy steel electrodes;
(c) Stainless steel electrodes ; and
(d) Nickel and nickel-alloy welding electrodes
(3) Electrodes shall be made by any method to yield a product conforming to the
requirements of these regulations and relevant AWS or SFA specification.
(4) The size and tolerance of the electrodes and rods for straight length and coils form
shall meet the appropriate AWS or SFA specification.
(5) Finish and uniformity.─The electrodes shall have smooth finish and reasonably
free from slivers, depressions, scratches, scale, seams, laps and foreign matter so
that these do not affect the properties of the weld metal. The core ingredients shall
be uniformly distributed throughout the length of the electrode ensuring the weld
metal properties.
(6) Coils, spools and drums containing electrodes shall have tag or label suitably and
securely affixed with suitable information.
(7) (a)Electrodes shall be suitably packed to guard against damage during transportation
andproduct information shall be legibly marked on each package.718 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) Each package shall be marked with the following information, namely:-
(i)Name of the Manufacturer;
(ii) Trade name /Brand name of the electrodes;
(iii) Size and quantity of electrodes;
(iv) Lot, Control or heat number; and
(v) American Welding Society (AWS) Classification
(8) (a) The electrodes shall be subjected to initial tests and periodic check tests to
ensure that the requirements of these regulations are fulfilled.
(b) Where any test specimen fails to satisfy the requirements of any particular test,
two further test specimens shall be prepared using the electrodes from the same
batch and submitted to the same test.
(c) The batch of electrodes shall be accepted as having passed the test provided that
the tests of both the additional specimens are satisfactory.
(9) (a)Test certificate provided by the manufacturer of electrodes shall fulfil the
requirements of the specification.
(b) The manufacturers, when called upon, shallproduce the results of the most recent
periodic check test carried out within the preceding twelve months, for the electrodes
supplied.
PART-XI
74. ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING.─(1)
(a)Thisregulation apply to electrodes and fluxes for submerged arc welding process.
(b) The electrodes and flux combination shall be suitable for submerged arc welding of
carbon steels, low alloy steels and nickel alloys in these regulations.
(c) The electrodes and flux combination shall comply with the applicable requirements of
AWS or SFA specification.
(d) The wire flux combination shall be suitable for multi run and single run technique, using
DC or AC current and producing weld with desired physical and metallurgical properties.
(e) The electrode flux combination shall be suitable for either semi-automatic or machine
welding process.
(f) The characteristics and behaviour of the flux electrode combination under ordinary
working conditions shall be such that satisfactory weld deposits can be made by a welder of
average skill and experience with following characteristics, namely:-.
(i) desired rate of deposition and depth of penetration;
(ii) no undue tendency to under-cut;
(iii) desired contour of the weld deposits;
(iv) low internal porosity of the weld metal; and
(v) desired degree of slag removal
(2) The electrodes shall be classified intofollowing three categories, namely:-
(a) Carbon steel electrodes with suitable flux;
(b) Low-alloy steel electrodeswith suitable flux; and
(c) Nickel alloy electrodes with suitable flux[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 719
(3) (a)Electrodes shall be made by any method to yield a product conforming to the
requirements of these regulations and relevant AWS or SFA specification.
(b)The method of manufacture of flux shall be fused, agglomerated and mixed and
Crushed slag or re-crushed flux shall not be used for manufacture of flux.
(4) (a)The size and tolerance of the electrodes shall meet the appropriate AWS or SFA
specification.
(b) Flux shall be granular for smooth feeding and ensure proper shielding. The
particle size distribution shall be uniform and consistent.
(5) (a)The electrodes shall have smooth finish and free from slivers, depressions,
scratches, scale, seams, laps and foreign matter.
(b) These shall not affect the properties of the weld metal.
(c)The core ingredients shall be uniformly distributed throughout the length of the
electrode ensuring the weld metal properties.
(6) (a)Coils, spools and drums containing electrodes shall have tag or label suitably and
securely affixed with suitable information.
(b) Bags containing flux shall have suitable identification.
(7) (a) Electrodes and fluxes shall be suitably packed to guard against damage during
transportation and product information shall be legibly marked on each package.
(b) Each package shall be marked with the following information, namely:-
(i) Name of the Manufacturer ;
(ii) Trade name / Brand name of the electrodes or flux;
(iii) Size and quantity of electrodes or flux;
(iv) Lot, batch or heat number; and
(v) American Welding Society (AWS) Classification
(8) (a) The electrodes and flux shall be subjected to initial tests and periodic check tests
to ensure that the requirements under these regulations are fulfilled.
(b) Where any test specimen fails to satisfy the requirements of any particular test,
two more test specimens shall be taken and subjected to the same test.
(c) The batch of electrodes and flux shall be accepted as having passed the test
provided that the tests of both the additional specimens are satisfactory.
(9) (a)Test certificate provided by the manufacturer of electrodes and flux shall fulfil the
requirements of the specification.
(b) The manufacturers, when called upon, shallproduce the results of the
latestperiodic check test carried out within the preceding twelve months, for the
electrodes or flux supplied.
75.(1) Initial tests of each brand of electrodes shall be carried out in accordance with these
regulations and relevant AWS or SFA specification.720 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) (a)All-weld-metal tensile test specimens shall be prepared and tested in accordance
with the method described in Appendix-C.
(b) The ultimate tensile stress, yield stress and elongation of each test specimen
shall meet the relevant AWS or SFA specification.
(3) One fillet weld hot cracking test shall be carried out as specified in Appendix-C.
(4) (a)The electrodes shall be deemed to be satisfactory provided no hot cracking occurs
under the conditions of test.
(b)Crater cracks may be neglected provided they do not run into the full section of the
weld.
(5) One transverse tensile test shall be carried out for each welding position for which
the electrode is recommended by the manufacturer except two tests shall be required
for the flat position. The ultimate tensile stress shall meet the relevant AWS or SFA
specification. The method of preparation of the test pieces is specified in Appendix-C.
(6) Two bend tests one with the face and the other with the root in tension shall be
carried out for each welding position for which the electrode is recommended by the
manufacturer, except that two in each shall be carried out for those intended for flat
position only. The method of preparation and carrying out the test shall be in
accordance with Appendix-C. The electrode shall be deemed to be satisfactory
provided that on completion of the test, no crack or defect at the outer surface is
greater than 3 mm measured across the specimen or 1.6 mm measured along its
length. Premature failures at corners of the test specimen shall not be considered a
cause for rejection. For nickel alloy electrodes three transverse side bend test shall
be carried out as per the applicable AWS or SFA specification.
(7) Five impact test specimens are required for carbon steel and low alloy steel
electrodes only. The size of the electrode shall be as per the relevant AWS or SFA
specification. Charpy V notch testing shall be carried out as per the applicable AWS
or SFA specification.
(8) Each classification of electrode shall be tested for the chemical analysis of undiluted
weld metal as per the relevant AWS or SFA specification.
(9) (a) All weld test plate shall be radiographed to evaluate the usability of the electrode
and the soundness of the weld deposits prior to taking up for other tests.
(b) For the purpose of radiography, the backing plate shall be removed and both the
surfaces of the weld metal shall be machined or ground smooth and flush without
reducing the thickness of the weld metal.
(c) Test procedure and acceptance norms shall be in accordance with the relevant
AWS or SFA specification.
(d) A length of 25 mm from both the ends of the test plate shall be discarded and
need not be considered in evaluation of the radiograph.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 721
76. Periodic check test.─The following periodic check tests shall be carried outon each
brand of electrodes, namely:-
(i) Periodic check tests consist of a selection of the tests mentioned underregulation75 and
they shall be repeated at intervals of not more than 12 months to provide evidence that the
electrodes currently produced continue to possess the properties recorded in the initial tests.
(ii) All-weld tensile test with any two sizes of electrodes within the limits mentionedin
sub-regulation (2) of regulation 75.
(iii)One Tee joint fillet weld hot cracking test as mentionedin sub-regulation (3) of regulation
75.722 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER-3
CONSTRUCTION AND WORKMANSHIP
PART-I
77. Preparation of plates.─ (1)The edges of all plates and butt straps shall be machined or
flame cut by machine and the caulking edges shall be bevelled to an angle not sharper than
20° to the plane of the plate and between 70° and 80°wherever practicable. Gusset Plates
may be sheared except on those edges, which are to be welded.
(2)Plates which are to be flame-cut by machine without heat treatment or subsequent
grinding or machining shall not have a carbon content higher than 0.25 per cent.
(3) Where the carbon content exceeds 0.25 percent, heat treatment, grinding or
machining shall be carried out.
(4) The edges of all plates shall have a smooth finish.
(5) Before commencingwelding of the joint (apart from tack welding), it shall be
ascertained that the chamfered edges are in alignment and that the defects in
alignment between the surfaces of the plates do not exceed as given in the table 3/1:
Table 3/1: ALIGNMENT TOLERANCE OF SECTIONS TO BE BUTT-WELDED
Serial Section Thickness(t), in mm Direction of joints in cylindrical shells
No.
Longitudinal Circumferential
1 Up to 13 mm incl. ¼ t ¼ t
2 Over 13 mm up to 19 mm 3 mm ¼ t
3 Over 19 mm and up to 38 3 mm 5 mm
4 Over 38 mm and up to 51 3 mm 3 mm
mm
5 Over 51 mm Lessor of t/16 or 9 mm Lessor of t/8 or 19 mm
(6) If plate edges of unequal thickness are abutted and the difference between the surfaces
exceeds the limit mentioned as above on either side, the thicker plate shall be thinned
to a smooth taper for a distance not less than 4 times the offset including, if so desired,
the width of the weld. In longitudinal joints, the middle line of the plates shall be in
alignment within 10 per cent of the thickness of the thicker plate with a maximum of 3
mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 723
78. Normalising or stress relieving of steel plates.─ (1) All plates which have been
dished or flanged shall be stress relieved as components when cold worked and normalized
when hot worked fully or partially.
(2)Stress relieving of components may be combined with final stress relieving when
stress relieving is envisaged later.
79. Minimum thickness of plates.─No boiler plate shall be less than 6 mm in thickness.
PART-II
80.Cylindrical shells.─ (1) Each ring shall be formed from not more than two plates and
rolled to cylindrical form to the extreme ends of the plate. The bending shall be done entirely
by machine. Local heating or hammering shall not be used for correction of profile.
(2)The longitudinal seam or seams may be placed in any suitable position but the
seams in successive rings shall not fall in line and shall be staggered by minimum 150 mm.
(3)In the case of brick set boilers the seam or seams shall be kept as far as
practicable clear of the brickwork.
81. Position of longitudinal seams.─Each ring of plate forming the shell, barrel or drum
shell, where practicable, be in one piece and have its longitudinal seam well out of line with
those of the adjoining rings. In Lancashire, Cornish, and other types of boilers, where parts
of the shell are exposed to flame, the longitudinal seams shell, where practicable, be in the
steam space, arranged alternately on each side of the crown and clear of the brick work.
82. Circumferential and end seams.─Joint efficiency of circumferential seams shall be
determined as detailed in sub-regulation (1) of regulation 169. In the event of tube holes
forming a ligament at the location of circumferential seams, the joint efficiency shall be
calculated as per regulation 171.
83.Angle rings.─Angle rings for the attachment of end plates to shell plates and/or flue
sections shall be rolled or machined so that they fit closely to the flat and cylindrical surfaces
to be connected, and shall be machined or machine gas cut on the caulking edges.
84. Thickness of shell angle rings.─Where shell plates and end plate are connected by
means of an external angle ring, the angle rings shallnot be less in thickness than as follows:724 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Table 3/2
(1) For shell plates up to and including 10 per cent in excess of the thickness of
16 mm in thickness the thickness of the shell plate.
(2) For shell plate exceeding 16 mm 90 per cent of the thickness and not less
thickness and up to and including than 17 mm.
25 mm in thickness.
(3) For shell plates over 25 mm in Made from angle bar having a section
thickness. thickness of 25 mm.
85.Welded shell plates.─The requirements of welded shells shall be covered by the
provisions made in regulations in Chapter -4 or Chapter -12, as the case may be.
PART-III
86. Flat end plates.─ (1) Wherever practicable, the flat or dished end plates of boilers shall
be in one piece made from one rolled plate. Where diameter of boiler is so large as to make
this impracticable, the flat end plates may be made from two pieces by fusion butt-welding.
(See figures 12/1 and 12/2). In the latter case, the line of welding shall be parallel to the
horizontal axis of the boiler and shall be subjected to full radiographic examination.
(2) Flanging of plates shall be done by machine. Cold forming of flanged end plate shall
be followed by heat treatment. Such flanging shall be done hot, preferably in one
operation, but where this is impracticable creep machine flanging may be used
provided that the plate is worked at a suitable temperature and heated for an
adequate distance beyond that portion of the plate under immediate treatment.
(3) Hot forming of welded plates shall be permitted provided that the welded joint is
subjected to 100 percent radiographic or Ultrasonic examination after hot forming.
(4) Welded plates up to and including 20 mm thickness can be cold formed provided it
complies with following conditions.
(a) Before cold forming, the weld reinforcement shall be ground smooth, and the
manufacturer shall take precautions, where necessary, in order to avoid crack
formation in the weld metal or the heat affected zone.
(b) If the inside radius of curvature after forming is less than 10 times the
thickness, stress relieving shall be carried out.
(c) After cold forming, the welded joints shall be visually examined and subjected
to 100 percent radiographic or Ultrasonic examination throughout their length.
Joints of any thickness which have been cold formed to a radius less than 10
times the thic
(d) kness shall be inspected for cracks by magnetic particle or penetrant
methods.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 725
(e) After completion of the flanging operation flanges shall be of true peripheral
contour (either circular or straight as necessary to ensure accurate alignment
with the connecting parts), and of good surface, free from bulges, grooves or
other local irregularities; flat portions of the plate shall be free from set or
distortion.
(5) In the construction of unfired boilers when the dished ends do not form a part of the
heating surface cold spun dished ends conforming to IS: 2825 may be used.
(6) Care shall be taken to see that the flanges are circular and of good surface, free from
local irregularities, and that they are parallel and square with the flat part of the plate.
(7) Flat portions of end plates, on completion of all flanging and machining operations,
shall be flat and free from set or distortion.
87. Strengthening of flat end plate at manhole.─ (1) In all cases, the front end plate
gusset stays below the furnaces shall be placed as closely as possible to the mudhole
frame.
(2) Where flat end plates are flanged for connection to the shell, the inside radius of
flanging shall be not less than 1.75 times the plate thickness, with a minimum of 38 mm.
88. End Plates in steam spaces.─When the end plates of boilers situated in the steam
space are liable to contact with hot gases, the end plates shall be efficiently shielded from
such contact.
89. Hemispherical crowns.─ (1) The segments for hemispherical shell crown plates shall
be pressed in one heat to correct curvature and shall be butt-welded together in accordance
with Figures 12/3, 12/4, 12/5 or 12/6. The cylindrical portion of the crown shall be tangential
to the hemispherical portion.
(2) Where hemispherical furnace crowns are pressed from one plate, they shall be
pressed to form by machine in progressive stages without thinning and shall be
annealedon completion.
90. Dished end and crown plates.─ (1) The dished end plates of boilers shall bepreferably
in one piece made from one-rolled plate. If this is impracticable, owing to the large diameter,
the dished end plate may be made from two plates, fusion butt welded together and in such
cases the requirements of stress relieving and radiographic examination as provided for in
regulation 86 shall apply and the line of weld shall be parallel to the horizontal axis of the
boiler.
(2) The inside radius to which a plate is dished shall not be greater than the external
diameter of the shell to which it is attached, except in the case of Lancashire and
Cornish boilers when the radius shall not exceed 1½ times the diameter of the shell.726 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) The inside radius of curvature of the flanges to the shell or firebox shall not be less
than four times the thickness of the crown or end plate and in no case less than 63
mm.
(4) The inside radius of curvature to uptakes shall be not less than twice the thickness of
the crown plate and in no case less than 25 mm.
(5) Bunged mouth-pieces may be welded on to end plates in place of the orthodox
flanging for the attachment of furnace tubes. Such welding shall comply with
provisions of regulation 97.
(6) Manhole frames may be similarly welded on the front end plates, and will be subject
to provisions of regulation 97.
91.Tube plates.─Smoke box tube plates shall be flanged for attachment to the barrel or
shell and shall be flat and connected thereto by welding.
92. Parts of flat tube plates within the tube nests.─(1) Where the total area of all tube
nests in directly fired multi-tubular boilers exceeds 0.65 square meters, stay tubes shall be
fitted.
(2) Where the total number of tubes in horizontal multi-tubular waste heat boilers and
direct fired loco type boilers is arranged in one nest, the area of which exceed 1.95 sq.
m stay tubes shall be fitted.
(3) In all cases where the total number of tubes is arranged in more than one nest, stay
tubes shall be fitted.
(4) The parts of tube plates which lie outside the nests of tubes shall be stayed or
supported wherever the size of the area of plate subject to steam pressure
necessitates staying or support, either by marginal stay tubes or other means.
93.Flanging of end plates.─All flanges shall be a good fit to the shell and flues. Flogging
and/or hammering in the fitting of these parts is prohibited. The caulking edges of all flanged
plates shall be machined or machine gas cut.
PART-IV
94.Furnaces.─(1)No furnace or firebox top, whether plain or corrugated, shall exceed 22
mm in thickness, and all circular sectioned furnaces when new, shall be as near the truly
circular form as the type of joint will permit.
(2) The use of Z angle rings for furnace foundation seams shall be prohibited.
(3) Furnace crowns, uptakes and other plates not in tension may be joined by fusion
welding provided the conditions laid down in regulation 95 to 101 are complied with.
The end connections of such plates to the shell or shell crown shall also comply with
such conditions. This construction shall not apply to furnaces of Lancashire and
Cornish type boilers consisting wholly or plain sections.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 727
95. Furnaces of horizontal boilers.─ (1) The sections of the internal flues shall each be in
one plate and shall be bent while cold to circular form and shall be welded longitudinally.
(2) The maximum permissible variation in diameter at any cross-section shall not exceed
the thickness of the plate.
(3) The weld shall be placed at the lower part of the flues, and shall break joint in
successive sections by at least 305 mm.
(4) Each flange for the circular seams shall be formed at one heat by suitable machinery.
(5) The sections shall be allowed to cool gradually to avoid internal stresses.
(6) The caulking edges of all flue flanges shall be machined or machine gas cut.
(7) The circular seams shall be arranged so that they do not fall in line with those of the
adjacent flue or with the circumferential seams of the shell and are at least 152 mm
apart.
(8) When flues are flanged for attachment to both end plates the total length of each
completed flue shall not exceed the length of the shell measured from the inner
surface of the back end plate to the inner surface of the front end plate, both
adjacent to the shell.
(9) Where the flues are flanged for attachment to the end plates, the end sections shall
be 1.5 mm thicker than the remaining sections, except in cases where the calculated
thickness is over 21 mm, when the end section shall be 22 mm in thickness.
(10) The flanged portion of furnace rings shall have radius of curvature of not less than
25 mm on water side.
(11) Sections of corrugated flues may be fusion butt welded circumferentially and
afterwards stress relieved by heat treatment.
(12) As an alternative to adamson flanges, furnaces which are partly fitted with
corrugated sections shall be strengthened by means of suitable stiffening rings
adequately welded to the furnaces. In no case shall a flat stiffener be less than 63
mm x 13 mm.
96. Furnaces of vertical boilers.─ (1) The furnaces of vertical boilers may be constructed
in one or more lengthwise sections, each section being rolled from one plate to a full circle.
In such cases, the component sections may be jointed circumferentially by electrically butt
welding and shall be stress relieved in accordance with regulation 123.
(2) In the case of vertical boilers where tube plates form part of the firebox, the tube
plate portion may be constructed in two vertical sections and the vertical seams when
welded shall be stress relieved. The maximum permissible variation in diameter, at
any cross-section shall not exceed 6 mm for fireboxes up to 900 mm in diameter, or728 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
10 mm for fireboxes over 900 mm in diameter, or half the thickness of the plate
whichever is greater.
(3) Circular furnaces shall preferably be tapered, a tapper of 38 mm in diameter per 300
mm of height being recommended. The minimum water space at the bottom
between the furnaces and the shell shall not be less than 50 mm for boilers up to 760
mm in diameter and shall be not less than 63 mm for boilers over 760 mm diameter.
(4) The method of welding shall be in accordance with regulation 151. Flats formed in
the firebox for the insertion of water tubes shall have ample radius at the junction of
the flat and the curved surfaces and shall be free from sharp corners or tool marks.
The plate shall not be unduly thinned.
(5) Ogee flanging where integral with the firebox or in a separate ring shall preferably be
formed in one heat by suitable machinery and shall be allowed to cool gradually to
avoid internal stresses. Rings of fire holes mouthpieces or foundation rings shall be
made of mild steel. Z sections shall not be used for foundation rings.
(6) Furnaces of vertical type boilers may be attached to the shell at the fire hole by a
circular ring of substantial section fusion welded to shell and firebox. The opening in
the shell for fire hole shall be substantially compensated by a ring welded on the
outside of the shell plate.
(7) At the fire hole the firebox plate and the shell plate may be flanged and fusion welded
together.
97. Fusion butt welded longitudinal seams.─Where the longitudinal seam is fusion butt
welded,the precautions shall be observedas follows:
(i) Plates 20 mm and above in thickness shall be bevelled from both sides of each
abutting edge but the bevel need not necessarily be the same on each side (see Figs.
3/1 and 3/2). Plates less than 20 mm in thickness may be bevelled from one side only
of each abutting edge (see Figs. 3/3 and 3/4).The included angle of the bevel shall be
not less than 60o and the bevelling may be any one of the forms shown in Figs. 3/1
to3/4.
Fig. 3/1 Fig.3/2 Fig. 3/3 Fig. 3/4
(ii) In order to obtain full penetration of the weld metal, a gap shall be maintained between
the plates when they are being welded. Joints shall be welded from both sides, and the
slag shall be removed after making each run. Before the second side of the joint is
welded any slag or defect at the bottom of the first run shall be removed by grinding,
chipping or machining. There shall be no appreciable undercutting of the plate.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 729
(iii) For the purposes of relieving internal stresses, the plates adjacent to a fusion weld shall
be efficiently annealed after welding.
98. Furnace crown.─ (1) The furnace crown shall be made from one plate and the seam
connecting it to the furnace shall not fall in line with any circumferential seam of the boiler
shell.
(2) The furnace crown may be welded to the vertical portion of the firebox. The joint shall
be fusion butt welded by the electric arc process, provided the conditions for fusion
welding underregulation 97 are observed. Where the joint is to be welded, the edges
of the furnace crown and the firebox body shall be bevelled in accordance with Fig.
3/3 or Fig. 3/4. The depth of the flange of the furnace crown plate from the
commencement of the curvature of the flanging radius shall be not less than four
times the plate thickness with a minimum of 38 mm. On completion of welding the
firebox shall be effectively stress relieved by heat treatment (also referregulation
100).
99. Cross tubes.─ (1) Cross tubes shall be made from seamless steel pipes or from plate
or strip rolled and electric resistance or fusion butt welded intopipesby electric arc process.
The fusion welding shall conform to the requirements of Chapter-12. Tolerances on these
pipes shall conform to the requirements of regulation 251. Where welded pipes are used,
the longitudinal welds shall be so situated that they are not exposed to the direct impact of
flame.
(2) Cross tubes shall not exceed 305 mm internal diameter. The minimum thickness
shall be 8 mm.
(3) Where welded construction is employed, the tubes shall be of sufficient length to
enter the furnace plate and the flush with the water side all round or project not less
than 6 mm and not more than 16 mm into the water space at any part of the
circumference. Where the tubes are fusion welded in position, the firebox plates shall
be suitably chamfered and the joints shall be welded externally and internally (see
Fig. 3/5).
Fig. 3/5: Fusion Welding of Cross Tubes of Vertical Cross Tube Boilers
100. Uptakes.─ (1) The uptakes shall be formed from seamless steel pipes or from plate or
strip rolled and electric resistance welded or fusion butt welded intopipesby electric arc
process. The tolerances on these pipes shall comply with the requirements of regulation
251.730 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) The uptake shall be fusion butt welded by the electric arc process to the upward
flange of the opening in the firebox crown plate provided the conditions for fusion
welding givenin regulation 97 are observed. The edges of the upward flange and the
adjacent end of the uptake shall be bevelled in accordance Fig. 3/3 or Fig.3/4. The
depth of the crown plate opening from the commencement of the curvature of the
flanging radius shall be not less than twice the plate thickness with a minimum of 25
mm. On completion of welding the uptake and crown plate shall be effectively stress
relieved by heat treatment.
(3) Where the firebox crown plate is also fusion welded to the body of the firebox, the
firebox complete with uptake shall be effectively stress relieved by heat treatment on
completion of the welding.
(4) Welded uptakes shall be so arranged that the weld is directly facing the longitudinal
centre line of the manhole.
101. Loco type fireboxes.─ (1)The seams shall be welded subject to the depth of the
flange being such that the welded seams fall between the 1st and 2nd rows of screwed stays
or between the flange and the adjacent row screwed stay.
(2) The firehole mouthpiece may be similarly welded when the firebox and shell are
flanged for the purpose.
(3) The welding shall comply with regulation 97.
PART-V
102. Bar stays.─Bar stays shall not be welded at any part. They shall preferably have plus
threadsand the ends of the stays being upset or the middle portion being reduced for this
purpose. Stay bars which have been worked in the fire shall be subsequently annealed.
103. Longitudinal stays.─(1) Longitudinal and similar solid screwed stays shall be
efficiently secured with nuts at each end and not merely riveted over. Where they are over
3657 mm in length, they shall be supported at intervals of 1829 mm along its length.
(2) Where the stay is screwed through both plates, the stay and holes shall have a
continuous thread and fitted with nuts and washers on the outside. Where the stay
passes through clearing holes and internal nut and washer shall also be fitted.
Where the stay is not normal to the surface of the plate the washer shall be shaped
so as to form a true surface for the nuts or a knuckle joint may be fitted.
(3) In vertical boilers the stays shall either be screwed into both crown plates or screwed
into the furnace crown plate and passed through clearing holes in the shell crown
plate.
104. Nuts and Washers for Stays.─(1) The washers shall be at least 2½ times the
diameter of the threaded portion of the stay and not less than 6 mm in thickness.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 731
(2) The thickness of the external nuts shall be at least equal to the diameter of the
threaded portion of the stay. Where bar stays pass through clearing holes in end
plates, internal nuts of a thickness not less than two-thirds of the diameter of the
threaded portion of the stay shall be fitted.
105. Jointed stays.─Where jointed longitudinal stay are fitted, they shall, where practicable,
be fitted with pins having an effective sectional area 25 percent in excess of that of the stay.
If the pins are slack in the holes, the total slackness shall not be more than 1.6 mm. The pins
shall be as close as possible to the shoulder of the eye forging. The shoulder of the forging
shall be at least 13 mm wide all round, i.e. the diameter at the shoulder shall be not less than
the diameter of the hole plus 25 mm.
106. Diagonal bar or rod stays.─The sectional area of diagonal rod or bar stay shall bear
the same proportion to that of a direct stay as the length of the diagonal stay bears to the
length of the perpendicular line from the end of the diagonal stay to the surface supported.
The ends of diagonal stays, shall not be bent, but shall be attached to the plate with bevelled
washers and nuts or with riveted tee, blocks or angles and shackle pins (referregulation 105
for eyes and pins).
PART-VI
107. Screwed stays.─ (1) Screwed stays and the holes for these shall be screwed with a
continuous thread.
(2) The screwed threads of the stay shall be clean andfree from checks or imperfections,
of full depth, correct whitworth form and a good fit in the holes. The middle portion
shall preferably be turned down to the bottom of the thread.
(3) The stays shall be screwed with fine threads of not less than 11 threads per 25 mm.
(4) The diameter of the stay over the threads shall not be less than 19 mm or twice the
thickness of the firebox plate whichever is the greater.
(5) The pitch of the stays at the furnace of vertical boilers shall not exceed 14 times the
thickness of the furnace plate.
(6) Where the stays are not fitted with nuts, the ends shall be riveted over to form
substantial heads.Alternatively stays may be screwed through the shell and firebox
plates and the projecting ends shall be substantially fillet welded in an approved
manner. The projection of the end of the stay from the surface of the plate shall be not
less than one quarter of the diameter of the stay but in no case less than 6 mm. The
full end of the stay shall be visible on completion of the welding.732 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(7) Crown stays of Loco type boilers shall either be fitted with nuts or riveted over on the
fire side.
108. Axial drilling.─All screwed stays less than 355 mm long should preferably be drilled
with a tell-tale hole 5 mm diameter to a depth of 13 mm beyond the inner face of the plate.
Stays which are obscure on one side shall preferably be made from hollow stay bar.
109. Stay nuts.─(1) Nuts of screw stays in combustion chambers and firebox shall not be
less than 19 mm thick for stays up to 38 mm diameter over threads, 22 mm thick for 41 mm
and 44 mm stays, 25 mm thick for 47 mm and 51 mm stays, and 28 mm thick for stays over
51 mm in diameter.
(2) The nuts shall be made of solid mild steel or of iron which shall be without weld, if
exposed to flame.
110. Spacing of end stays-allowance for curves, etc.─For the tops of fireboxes and
combustion chambers, the distance between the rows of stays nearest to the tube plate or
fire hole plate or back plate, as the case may be, and the commencement of curvature of
these plates at their flanges shall not be greater than the horizontal pitch of the stays.
PART-VII
111. Girder stays for firebox and combustion chamber crowns.─ (1)Each girder when of
the normal type, fitted with stay bolts and nuts, shall be of the double plate interconnected
type of sufficient strength to support its proportion of the load on the crown to support plate
independently of the crown plate, and the bolts or weld attachments shall have sufficient
cross-sectional area to carry the applied load.
(2) The clear waterway between the crown plate and the underside of the girder bars shall
be as large as practicable but in no case less than 38 mm as in Fig.3/8.
(3) The ends of the girders shall not rest on the landing of the flat crown plate but shall be
carefully fitted to bed directly on the bends of the corners of the vertical end or side
plates.
(4) The toes of the girder plates shall be solid with the girder platesand not separate
pieces attached thereto.
(5) Girders shall be properly attached to the crown plate by bolts or screws.
(6) Where an all welded firebox is fitted, the girder stays may be welded to the firebox
prior to stress relieving. The girder stays shall be recessed for waterways as in sub-
regulation (2) (Fig. 3/6 and Fig. 3/7).Such girders shall be securely welded by an
approved method to the firebox crown. The method of welding and the proportions of
attachment shall be to be satisfaction of the Inspecting Authority.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 733
Fig. 3/6 Fig. 3/7
PART-VIII
112. Gusset stays.─(1) Gusset plates shall be flat and perpendicular to the end plates. The
gusset angles shall be fitted to bed closely to the shell end plate and gusset plates.
Cranking or setting of the plates is prohibited.
(2) Gusset stays, where fitted, shall comprise flat plates secured by double angles to the
shell and end plate respectively, and shall be designed in accordance with the following.
113. Breathing space.─(1) Gusset stays shall be so arranged as to allow sufficient
breathing space around furnace connections and the tube nests.
(2) For Lanchashire boilers, the proportions shown in the table below are recommended
for portion of the end plates above the furnaces and flues.
Table 3/3
Sl. Thickness of End Plate L (Fig.3/8) L (Fig. 3/9)
No.
(1) (2) (3) (4)
mm mm mm
1 13 228 254
2 14 254 254
3 16 279 309
4 17 309 330
5 19 309 330
6 21 309 330
7 Above 21 317 343734 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 3/8 Fig. 3/9
(3) Fig. 3/8 shows the breathing space recommended for the following conditions: Flat
end, furnace or flues flanged for attachment to end plate, furnaces and flues formed
with Adamson flanged seams.
(4) Fig. 3/9 shows similar conditions to Fig. 3/8 except that the end plate is flanged
outwards for the furnace or flue ring connection, the breathing spaces allowed being
25 mm more than those for the same thickness of plate in Fig. 3/8
(5) Where a corrugated section not less than 1830 mm long is included in each internal
flue or a Lancashire boiler, the dimensions given in the table above may be reduced by
approximately 38 mm throughout.
(6) It is recommended that the breathing space below the furnaces and flues shall be
approximately one half of the dimensions given in the table above. Whereas it is
desired to use any other arrangement which gives a greater or less degree or
flexibility, the amount of breathing space shall be specially considered and modified as
the necessity of the case requires.
(7) For Gusset stays above tube nests, as fitted in waste heat boilers without internal
furnaces, a breathing space of 203 mm from the center line of the top tubes of the
center of the toe rivets of the gusset angles is recommended (see Fig. 3/9).
114. Gusset angles.─The gusset angles connecting the stays to the shell and end plates
shall be at least 7/8th of the thickness of the shell plate, but shall be not less than 13 mm
thickness.
115. Load on gusset stay.─Each gusset stay supporting the end plate of a boiler shall be
designed to carry the whole load due to pressure on the area supported by it.
PART-IX
116.Boiler tubes subject to external pressure.─Both plain and stay smoke tubes may be
made either of wrought iron or steel and may be electric-resistance-welded or seamless.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 735
117. Fitting of plain tubes.─(1) Plain tubes shall be expanded at both ends. The
expanding shall be parallel throughout the full thickness of the tube plate. Plain tubes may
also be bell-mouthed, beaded, or welded at the gas inlet end.
(2) Where stay tubes are not fitted, the ends of the tubes shall be beaded over at the fire
box end and beaded or bell-mouthed at the other end. If bell-mouthed, the tubes shall
protrude not less than 13 mm beyond the tube plate.
PART-X
118. Screw threads of stay tubes.─(1) Stay tubes shall be screwed at both ends with
continuous threads, and the holes in the tube plates shall be tapped with continuous
threads. The pitch of the threads shall not be finer than 11 threads per 25 mm. The stay
tubes shall be expanded by roller expanders and not made right by caulking only.
(2) Stay tubes may be attached by welding in which case they shall not be adjacent within
the same tube nest except in local areas, where not more than two adjacent stay tubes
may be attached by welding. The form of attachment shall be such that there is a
mechanical hold in addition to the welding, as shown in Fig.3/10. On completion of
welding the stay tubes shall be lightly re-expanded.
Fig. 3/10: Typical Example of Welded Stay Tube
119. Stay tubes.─(1) Stay tubes are tubes having a weld depth equal to the nominal tube
thickness plus 3 mm. These stay tubes are not required within tube nests except when the
tube nests comprise tubes which are expanded only.
(2) If tube nests comprise plain tubes that are expanded and beaded, expanded and
belled or expanded and welded, welded stay tubes shall be used in boundary rows in
sufficient numbers to carry the flat plate loadings outside the tube area.
(3) For plain tubes or stay tubes exposed to flame or gas temperatures exceeding 600°C,
the ends of welded tubes shall be dressed flush with the welds. If not so exposed, the
ends of welded tubes shall extend a maximum of 10 mm beyond the weld or, in the
case of expanded tubes the tubes shall project beyond the tube plate up to a
maximum of 15 mm.
(4) Each stay tube shall be designed to carry its due proportion of the load on the plates
which it supports.736 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) The thickness of stay tubes welded into tube plates shall be such that the axial stress
on the thinnest part of the tube does not exceed 7.14 kg/mm2.
(6) The thickness of stay tube at any part shall not be less than the values shown in the
Table below. Minus tolerances shall be taken into account when ordering tubes.
TABLE 3/4
Serial Nominal outside diameter in mm Minimum Thickness in
No. mm
(1) (2) (3)
1. Not exceeding 38 2.28
2. Exceeding 38 but not exceeding 51 2.81
3. Exceeding 51 but not exceeding 70 3.12
4. Exceeding 70 but not exceeding 76.2 3.38
5. Exceeding 76.2 but not exceeding 88.9 3.96
6. Exceeding 88.9 but not exceeding 101.6 4.26
7. Exceeding 101.6 but not exceeding 127 4.55
120. Thickened ends of stay tubes.─If stay tubes are required to have their thickness
increased at the screwed ends so that the thickness at the bottom of the threads is
approximately the same as in the body of the tube the thickening shall be attained by
upsetting and not by welding process, and the tubes shall be annealed after the upsetting.
121. Load on stay tubes and stay bars.─Stay tubes shall be designed to carry the whole
load due to pressure on the area to be supported. In each case the area to be calculated is
as follows:
(i) For a stay tube within the tube nest the net area to be supported shall be product of
the horizontal and vertical pitches in mm of the stay tube less the area of the tube
holes embraced. Where the pitch of the stay tube is irregular the area shall be taken
as the square of the mean pitch of the stay tubes (i.e. the square of ¼ of the sum four
sides of any quadrilateral bounded by four adjacent stay tubes) less the area of the
tube holes embraced.
(ii) For a stay in the boundary row the net area to be supported shall be the area enclosed
by lines passing midway between it and the adjacent points of support less the area of
any tubes embraced. The adjacent points of support may be other stay tubes or the
commencement of curvature of flanging of center line of the circle or rivets securing
the end plate to the shell angle.
(iii) In the case of bar stay where there are no stay tubes in the tube nest the area to be
supported shall extend to the tangential boundary of the tube nest.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 737
PART-XI
122.Boiler and super heater tubes subject to internal pressure steel tubes.─ (1) All
tubes which are subject to internal pressure of water or steam shall be cold drawn or hot
finished seamless or electric resistance welded in accordance with Chapter-2. Except as
provided for in sub-regulation (2)below, they shall be without joint.
(2) Tubes having an external diameter not exceeding 127 mm may be jointed and such joints
may be flash welded, machine forge welded arc or gas welded. Tubes above 127 mm
diameter may also be welded provided they are located outside the furnace. Such welds
must conform to the requirements of Chapter-7.
(3) Flash butt welding shall be undertaken as per the qualified procedure. The external fin
caused by flash butt welding shall be removed subject to a maximum height of 5 percent
of the tube outside diameter. The required flow area shall be ensured by conducting ball
test using nearest ball diameter of 75% of the nominal Internal Diameter of the tube size.
(4) All fusion welded butt joints shall be post weld heat treated as per the requirements
specified in regulation 123.
(5) When gas welding is implied the technique followed shall be approved by a Competent
Person.
(6) For design metal temperatures and material requirements refer to Table 2/1 of regulation
30.
(7) The technique employed in all field welding of tubes shall be subject to the approval of
Inspecting Authority or Chief Inspector as the case may be.
(8) All butt weld of tubes shall be tested as required hereunder:
(i) Fortubes greater than 178 mm bore, all welds shall be non-destructively tested
by radiographic or other approved methods.
(ii) For tubes greater than 102 mm bore and up to and including 178 mm bore,
ten(10) per cent of the welds by each welder, selected at random with a
minimum of 2 welds per welder, shall be subjected to non-destructive
examination by radiographic or other approved method.
(iii) For tubes 102 mm bore and under, sample welds simulating the production
welds shall be provided for mechanical testing either at a rate of 2 per cent or
after each 150 welding hours with a minimum of one sample weld per welder.
(iv) Alternatively, 5 per cent of the welds made by each welder selected at random,
with a minimum of one weld per welder, shall be subjected to non-destructive
examination by radiographic or other approved method. This rate may be
reduced to 2 per cent by arrangement with the Inspecting Authority after initial
satisfactory results have been produced.738 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(v) In the event of any non-destructive test not meeting the requirements, defects
in the welds represented by that test shall be rectified and the Inspecting
Authority may call for an increase in the number of non-destructive tests until
such time as a satisfactory standard is achieved.
(9) Butt welded joints as indicated in sub-regulation(8) shall be subjected to non-
destructive examination by radiographic, radioscopy or other approved methods such
as ultrasonic testing including phased array ultrasonic testing, magnetic particle
inspection or liquid dye penetrant inspection. When radioscopic examination is to be
performed in lieu of radiography on welded components, the following requirements
shall be met, namely:-
(a) A written procedure shall be submitted for approval to the Inspecting Authority which
shall contain the following:
(i) material and the thickness range;
(ii) equipment qualifications;
(iii) test object scan plan;
(iv) radioscopic parameters;
(v) image processing parameters;
(vi) image display parameters;
(vii) image archiving requirements;
(viii) accept-reject criteria (Code reference);
(ix) performance evaluation;
(x) Operator identification.
(b) The system shall be aided with an image processor to enhance the quality of the
radioscopic images and system performance quality shall exhibit-
(i) A thin section contrast sensitivity of 3 percent;
(ii) A thick section contrast sensitivity of 2 percent;
(iii) A spatial resolution of 3 line pairs per mm;
(iv) Image Quality Sensitivity(IQI) sensitivity - 2 percent of the joint thickness
when wire IQI's are to be used, the wire diameter axis shall be oriented
along the axis of the least sensitivity of the system.
(c) Radioscopes are to be properly marked to co-relate with particular part of joint
represented.
(d) The radioscopic examination data shall be recorded and stored on a suitable
storage media like videotape, magnetic disk or optical disk at the maker's plant
for a sufficient period after the date of radioscopic examination as specified by
the Inspecting Authority, efficient radioscopic examination record recall shall be
made available at any time over the record retention period and shall be
traceable to the test objects.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 739
(e) When repair has been performed as a result of radioscopic examination, the
repaired areas shall be re-examined using the same radioscopic technique to
evaluate the effectiveness of the repair.
(f) To aid in proper interpretation of the radioscopic examination data, the details of
the technique used shall accompany the data. The minimuminformation shall
include the approved procedure requirements and system performance test data.
123. Requirements of Post Weld Heat Treatment(PWHT).─ The requirements of Post
Weld Heat Treatment(PBWH) shall be as provided in Table 3/5
Table 3/5
Serial Material group (as per PWHT PWHT not required under the following
No. Table 2/1) conditions:
(1) (2) (3) (4)
1 (i) For All Product Forms:
M1 Group 1, M1 Group 595°C min (a) nominal weld thickness (t) ≤ 20 mm;
2 and
(b) If preheated to 95°C min when nominal
weld thickness (t) ≤ 20 mm and nominal
base metal thickness ≤ 25 mm; and
(c) C ≤ 0.25%;
(ii) Only for tubes and pipes, if 0.25% < C
≤ 0.3% and nominal thickness ≤ 9 mm; In
case of welded stays, diameter of stay is
not used to determine preheat
requirements.
2 (a) For all product forms nominal wall
thickness (t) ≤ 16 mm except for tubes
M3 Group 1 595°C min
and pipes t ≤ 13 mm & OD ≤ 127 mm; and
(b) C ≤ 0.25%
3 (a) For all product forms nominal base
metal thickness t ≤ 16 except for tubes
M4 Group 1 650°C min
and pipes t ≤ 13 mm & OD ≤ 127 mm; and
(b) C ≤ 0.15%; and
(c) Preheat 120°C min
4 (a) For all product forms nominal base
675°C min metal thickness t ≤ 16 except for tubes t ≤
M5A Group 1 &
13 mm & OD ≤ 127 mm and for pipes t ≤
13 mm & OD ≤ 127 mm; and
M5B Group 1740 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) Cr ≤ 3%; and
(c) C ≤ 0.15%; and
(d) Preheat 150°C min
5
M15 E Group 1 730°C to 785°C NIL
6 NIL
M8
PWHT : Nil
7 PH: 250-300°C for NIL
GTAW and 400-
MX20
450 for SMAW
Post Heat:80-
100°C for 90
minutes minimum
PWHT: 740°C -
760°C
8 MX12 (t up to 52 mm) PH:220°C NIL
PWHT: 725°C +/-
15°C
9 M43 950°C min (a) For design temperature less than
540°C
or
(b) for circumferential butt welds in
pressure parts with a nominal base metal
thickness of 13 mm or less at the weld
Notes-1:
(a) All the heat treatment ranges shall be aligned with the Qualified Welding
Procedure.
(b) When pressure parts of two different M‐Number groups are joined by welding, the
post weld heat treatment shall be as specified in Table 3/5 for the material
requiring the higher post weld heat treatment temperature, except M-No. 8 group.
(c) Fillet welds, partial penetration welds, and full penetration welds through the tube
or pipe thickness, attaching M-No. 4 or M-No. 5A tubes and pipe to headers of
lower M‐Number material, may be post weld heat treated at the temperature[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 741
specified in Table 3/5 for the lower M‐Number material provided the tubes or pipe
comply with all the following conditions:
(i) a maximum specified chromium content of 3 percent
(ii) a maximum size of NPS 4 (DN 100)
(iii) a maximum thickness of 13 mm.
(iv) a maximum specified carbon content of not more than 0.15 percent
(d) When non-pressure parts are welded to pressure parts, the post weld heat
treatment temperature of the pressure parts shall control. Pressure part welds and
attachment welds using ferritic filler metals that have a specified chromium content
of more than 3% shall receive a post weld heat treatment. The post weld heat
treatment time and temperature used shall be not less than that shown in Table 3/5
for a base metal of equivalent analysis.
(e) The nominal thickness to be considered for determining Post Weld Heat Treatment
and soaking time shall be defined as:
(i) For full penetration butt welds, the nominal thickness is the thinner of the parts
being joined.
(ii) For full penetration corner welds, the nominal thickness is the depth of the weld.
(iii) For partial penetration groove and material repair welds, the nominal thickness is
the depth of the weld. The total depth of partial or full penetration groove welds
made from both sides shall be taken as the sum of the depth of both sides at a
given location.
(iv) For fillet welds, the nominal thickness is the weld throat. When a fillet weld is
used in conjunction with a groove weld, the nominal thickness is either the depth
of the groove weld or the fillet throat dimension, whichever is greater.
(v) Except as stipulated in clause (vi) below, the nominal thickness is the depth of
the groove, if present, through the shell or nozzle or reinforcing pad, or the throat
of any fillet weld, whichever is greater.
(vi) When multiple openings form a ligament where the spacing between centres is
less than twice the average diameter, the nominal thickness of a combination
groove and fillet weld shall be the sum of the groove depth and fillet weld throat.
(vii) The thickness of the pressure part at the point of attachment where a non-
pressure part is welded to a pressure part, in case of butt welds;
(viii) The thickness of the fillet weld at the point of attachment where a non –
pressure part is welded to a pressure part, in case of fillet welds.742 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(f) When it is impractical to carry out PWHT at the temperature specified in Table III/5
for M1 and M3 materials, it is permissible to carry out PWHT at lower temperatures
for longer periods of time in accordance with table 3/6 given below.
Table 3/6: Alternate PWHT requirements for Carbon and Low alloy steels
Serial Decrease in temperature below Minimum holding time at Notes
No. minimum specified temperature, decreased temperature, hour
°C (Note(1))
(1) (2) (3) (4)
1 28 2 -
2 56 4 -
3 83 10 (2)
4 111 20 (2)
Notes:
(1) Minimum holding time per 25 mm for thickness up to and including 50 mm. Add 15 min per
25 mm of thickness for thickness greater than 50 mm.
(2) These lower Post Weld Heat Treatment temperatures permitted only for M-No 1, Group 1
and 2 materials.
(g) Soakingduring heating / SR (or PWHT) shall be as per below guidelines:
Table 3/7: Soaking
Serial HT Cycle Soaking Time Remarks
No.
(1) (2) (3) (4)
1 Hot Working/ Normalizing For M5B, M-15E Gr1 (P91): 30 ‗t‘ is the product
minutes per 25 mm of ―t‖ or 30 thickness for Stress
minutes min whichever is greater & for relieving.
all others 30 minutes per 25 mm of ―t‖
or 15 minutes min whichever is
greater.
2 SR/PWHT – Carbon Steels 1 hour per 25 mm of ―t‖ for ―t‖ up to 50
mm with an additional 15 minutes for
‗t‘ is nominal thickness
every 25 mm above 50 mm (15
as per Note (b) of
minutes minimum).
Table 3/5 for PWHT.
3 SR/PWHT – Alloy Steels 1 hour per 25 mm of ―t‖ with below[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 743
mentioned minimum soaking times:
(M3 & M4) – 30 minutes minimum.
(M5A) – 60 minutes minimum except
for M5A pipes of OD ≤ 127mm and t ≤
13mm, which require only 30 minutes)
(M5B & M-15 E Gr 1) – 60 minutes
minimum
4 MX20 2 hrs minimum for thickness below 60
mm and 3 hrs minimum for thickness
above 60 mm
5 MX12 (t up to 52 mm) 1 hour per 25 mm of ‗t‘ - 30 minutes
minimum.
6 SR/PWHT – Nickel Alloys 1 hour per 25 mm of ‗t‘ - 60 minutes
minimum.
(h) The temperature of the furnace at the time of placing the component for SR/PWHT
shall not be higher than 425°C. The component shall be kept at SR/PWHT
temperature to the minimum soaking time. After SR/PWHT the component shall be
left to cool to in the furnace to a temperature not exceeding 425°C. After
withdrawal from the furnace the part shall be allowed to cool in a still atmosphere.
(i) The rate of heating above 425°C and rate of cooling up to 425°C shall be as below.
The rate of heating and rate of cooling should not exceed 335°C per hour divided
by the thickness in inches, but in no case should it be more than 335°C per hour.
Notes 2:
(i) In case socket welded joints or other type of joints for carbon steel pipes, valves
and fittings, PWHT is not required if the throat thickness of fillet weld does not
exceed 20 mm or carbon content does not exceed 0.25%.
(ii) For carbon steel Headers and Mud boxes of water tube boilers, material having a
maximum Carbon content of 0.25%, the Post Weld Heat Treatment requirement
for tubes welded to Header is not mandatory when all the following conditions are
fulfilled, namely:-
(a) The outer diameter (OD) of tubes is not more than 51 MM;
(b) The outer diameter of the Header is not more than 219.1 MM;
(c) The Header thickness is not more than 13 MM;
(d) A minimum pre-heat of 100°C is applied.
(iii) For Carbon steel, if the thickness of the small component of boiler exceeds 20
mm and the weld recess also exceeds 20 mm local stress relieving to the
satisfaction of the Inspecting Authority shall be permitted.744 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iv) Post-weld heat treatment in weld joints of carbon steel and low alloy steel may be
exempted when heat treatment is not practical where inside is lined with special
Stainless Steel which cannot be heated beyond 400°C (due to the associated
problem of reduction of corrosion properties of such lining during heating to the
temperature), when all the following conditions are satisfied –
(a) Built-up overlay welding (buttering is performed on both the welding edge
bevels of the parts of the closing joint to be welded together. The buttering
can be of:
(1) With Carbon Steel Electrode with low carbon (C) = 0.1 Percent max. (Ex:
E7018-1) in case of Carbon Steel parts.
(2) With Stainless Steel Electrode E-309 or with Inconel electrode in case of
low alloy steel parts.
(3) With low alloy steel electrodes, having carbon (C) = 0.12 percent
maximum or with Inconel electrode in case of high strength low alloy steel
parts having UTS greater than 56 kg/mm2 such as WB36, SA 533 Type B
Cl 2;
(b) Buttering thickness shall be 15 mm minimum on the side where chip back is
required to be done before re-welding and 8 mm minimum on the other side.
Refer Figure given below:
Fig. 3/11
(c) Suitable pre-heat and other pass heating is applied during buttering:
(d) Individual parts are post-weld heat treated after buttering prior to welding the
special stainless steel corrosion resistant liner plate or prior to applying final
weld overlay of special corrosion resistant stainless steel lining;
(e) The final layer on the internal line side shall be compatible with liner material
and final weld (carbon steel welding in carbon steel base metal, low alloy
steel Inconel welding in case of high strength low alloy steel base metal and
E309 Inconel welding in case of other low alloy steel base metals) on the
base metal side shell be compatible with base metal in respect of mechanical
properties. The welding procedure shall be established taking care of[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 745
adequate toughness and ductility and the procedure approved by Inspecting
Authority or Chief Inspector, as the case may be;
(f) Charpy – V Notch impact test is carried out at 20°C for:
(i) Base metal and heat affected zone,
(ii) Weld metal in case of Carbon Steel welding;
(g) Non-destructive testing as below (recommended):
(i) Magnetic particle test of weld bevels prior to buttering.
(ii) Dye-Penetrant test of buttering layer.
(iii) Dye-Penetrant test of rest of weld.
(iv) Dye-Penetrant test of final weld on internal liner side.
(v) Ultrasonic test of final weld after hydro test of the equipment with the
closing seam.
124. Attachment of Steel Tubes.─ (1) Steel tubes shall be connected to the tube plates by
one of the following methods:-
(i) Expanding.
(ii) Strength welding.
(iii) Mechanical bolted ball joint.
(2) Drift or roller expanded tubes shall project through the neck or bearing part in the
holes by at least a quarter of 25 mm and shall be secured from drawing out by being
bell mouthed to the extent of 0.8 mm for each 25 mm in diameter plus 1.6 mm.
(3) Tubes may be seal welded into fittings or headers for both boilers and super heaters
after they have been expanded and flared provided the material in the fittings or
headers does not contain carbon in excess of 0.35 per cent.
(4) In the case of drifted or roller expanded tubes, the tube holes in the tube plates of
drums, pockets, or headers shall be formed in such a way that the tubes can be
effectively tightened in them. Where the tube ends are not normal to the tube plate,
there shall be a neck or belt of parallel seating of at least 13 mm depth measured in a
plane normal to the axis of the tube at the holes.
(5) Where tubes are strength welded direct to the tube plates, the technique followed
shall be approved by the Inspecting Authority and all welds shall be suitably heat
treated. In the case of plates below 22 mm thickness, the requirement of stress
relieving by heat treatment after welding of the tubes may be waived provided the
weld satisfies the requirements of the maximum hardness and also the requirements
concerning the impact values of the weld metal. The welding procedure adopted and
the weld sequence selected shall also be subject to the approval of the Inspecting
Authority. This provision in applicable to only shop welding of tubes at the
Manufacturers Works.746 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) Tubes spacers, supporting clips and lugs may be welded to the tubes. Flash welding
of studs for supporting refractories, etc, is also permissible.
(7) The tubes shall be so arranged that they are accessible for cleaning internally and
externally.
PART-XII
125. Headers, mud boxes, etc. of water tube boilers.─(1) (a) Headers and mud boxes,
etc. of water tube Boiler may be of seamless or welded steel or of cast steel complying with
the requirements of the provisions contained in regulations 49 to 57. Where welded, the
welding shall be stress relieved, radio graphed or ultrasonically examined and in all respects
shall be to the satisfaction of the Inspecting Authority as per Table 3/5 of regulation 123.
(b) Open ends of seamless steel tube headers may be closed by forging or the ends
may be secured by bolting, screwing or welding in an approved manner. Bolting
shall not be used where the bolts are exposed to or are swept by gases of
combustion.
(c) The method of attachment of the ends shall be subject to the ends shall be subject
to the approval of the Inspecting Authority.
(2) Each piece prior to being fitted in place shall be subjected to hydraulic tests to one-
and-a-half times the design pressure of the boiler into which it is to be fitted.
(3) (a) The sighting hold doors and header caps shall be substantial and be capable
of being removed or replaced from time to time without loss of efficiency of
safety. They may be held in position either by means of bolts or by seal
welding.
(b) The bolts by which they are held in place shall be fitted to them in such a way
as to satisfy the above conditions.
(c) The doors shall be so designed that they will not blow out in the event of
breakage of the bolt.
(d) Circular holes also may be provided in addition to elliptical holes, if provision
is made to prevent the door bolts from turning, while securing the joint.
(4) All flanges shall have a fillet with a radius of curvature at least equal to the thickness
of the necks to which they are attached.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 747
PART-XIII
126. Stand pipes and padsetc..─Stand pipes and seating for carrying mountings shall be
made of wrought, cast of fabricated steel. These shall take the form of short stand pipes,
pressed steel plate saddles, forged pads or pads cut from round rolled bar as may be most
convenient and secured to the boiler by welding. Where short stand pipes are used they
shall be of solid forged, fabricated or cast steel. They shall be carefully bedded to the shell
before attachment. The jointing faces to which mountings are to be bolted shall be
machined. Pads shall have sufficient thickness to allow the drilling of stud holes for
mountings without the inner surface being pierced and the length of the screwed portion of
the stud in the pad shall be not less than the diameter of the stud.
127. Design of stand pipes.─The design of the branches and stand-pipe shall be regulated
in the following manner:
(i) in order to withstand the maximum allowable working pressure, the minimum thickness
of branch and stand-pipe shall be determined in accordance with the provisions
specified in sub-regulation (1) of regulation 244;
(ii) Compensation requirements for openings in the main pressure parts shall be
determined in accordance with the provisions of regulation 179;
(iii) The additional thickness shall be considered to withstand superimposed loading due to
connecting pipe-work or fittings.
(iv) The minimum thickness of the branch or standpipe shall be the greatest of the values
required above and shall not be less than 0.015 d plus 3.2 mm where, d is the
o o
outside diameter of the branch (in mm);
Provided that the provisions of the regulations shall not apply to such tube stub
which have been designated as tubes.
128. Pressed plate saddles.─Where pressed plate saddles are employed they shall be
formed to bed closely to the boiler and machined on the face jointing the mounting and on
the edges. The studs for attachment of mountings, if screwed through the saddle, shall each
be fitted with a nut on the inside having a thickness equal to the diameter of the stud. Where
the stud holes do not penetrate through the saddle, the length of the screwed portion of the
stud in the plate shall not be less than the diameter of the stud.
129. Seatings for mountings.─ (1) For pressures not exceeding 8.7 kg/cm2(g), mountings
with the screwed ends not exceeding 1 inch S.P.T.(Straight Pipe Threads) may be used; the
screwed portion of any such mounting being not less than 5 mm.
(2) The mountings may be screwed:
a. Directly into the boiler shell plate, nuts being fitted on the water side, or748 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
b. Into steel distance pieces the length of thread engaged being in no case less than
the bore of the mounting plus 6 mm.
(3) The distance pieces shall be made from solid mild steel. They shall be screwed into
the plate and fitted with nuts on the water side. The walls of the distance pieces shall
be not less than 6 mm thick at the bottom of the thread.
130. Attachment of mountings.─ (1) Mountings may be attached directly to any shell or
end plate where the plate is of sufficient thickness to allow a suitable surface to be obtained
for the attachment of the boiler mountings.
(2) The minimum thickness at the hole in the shell or end plate shall be not less than
the thickness required for the maximum allowable working pressure considering the
plate as being unpierced.
(3) Where the boiler mountings are secured by studs, the studs shall have a full thread
holding in the plate for at least one diameter. If the stud holes penetrate the whole
thickness of the plate. The stud shall be screwed right through the plate end be
fitted with a nut inside having a thickness equal to the diameter of the stud. Where
bolts are used for securing mountings they shall be screwed right though the plate
with their heads inside the shell or end plate.
131. Insufficient thickness of end plates.─ (1) In cases where the thickness of the end
plate is insufficient for this purpose the mountings shall be joined to suitable steel seatings
as provided in regulation 126.
(2) The following constructions as to stand pipes attached to shells and end plates shall
be permissible:
(i) Where the internal diameter of the stand pipe does not exceed 25 mm, the
standpipe may be screwed into the plate and fitted with a nut on the
waterside.
(ii) Where the internal diameter of the standpipe exceeds 25 mm but does not
exceed 51 mm, it may be screwed in and seal-welded.
(iii) Where the diameter of the standpipe exceeds 51 mm, it may be welded to the
end plate.
(3) The foregoing provisions as to the stand pipe shall be regulated by the following
conditions:
(i) When stand pipes are screwed, the screwing shall be of Standard Pipe Thread,
(ii) Where stand pipes, saddles or other forms of seatings are fabricated by fusion
welding they shall be stress relieved by heat treatment before attachment to the
boiler,
(iii) Where the bore of the stand pipe or seating and the hole in the plate does not
exceed 127 mm plus twice the thickness of the plate, the seating may be welded
to the plate without subsequent heat treatment of the weld so made. Where the[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 749
hole in the plate exceeds 127 mm plus twice the thickness of the plate, the plate
to which seating is attached shall be stress relieved by heat treatment.
132. Attachment of water and pressure gauges.─Water gauge and pressure gauge
siphons may be attached direct to the front end plates without the intervention of a pad or
stand pipe, provided they are flanged and secured by studs. If the studs are screwed
through the plate, nuts shall be fitted on the inside of the plate.
133. Mountings on flat places.─Where the flanged mountings are attached direct to a flat
plate, such mountings shall be provided with a substantial spigot, the full thickness of the
boiler plate.
134. Bolts and nuts.─Bolts and nuts shall be machined where they come in contact with
the flanges, and all holes in saddles and pads shall be drilled.
Note: In all cases where boiler is lagged the joint of the mountings shall be clear of the
lagging surface or the lagging kept clear of flange so that the joint can be inspected and, when
necessary, remade.
PART-XIV
135. Manholes, mudholes etc.─ (1) Sufficient sight and cleaning holes shall be provided to
permit efficient inspection and cleaning. Such holes shall normally be elliptical in form and
not less than 89 mm x 63 mm.
(2) At least one manhole or sight hole shall be provided in the upper part of the
cylindrical shell or in the shell crown, or end plate and this shall not be less thanas
given in the TABLE 3/8:
TABLE 3/8
Serial Size in mm
No.
1 Boilers not exceeding 760 mm 230 x 180
2 Boilers over 760 mm diameter and not exceeding 915 mm 305 x 230
3 Boilers over 915 mm diameter and not exceeding 1060 355 x 255
mm
4 Boilers over 1060 mm diameter and not exceeding 1220 380 x 280
mm
5 Boilers over 1220 mm 410 x 305
(3) Where the size of construction of the boiler does not permit entry for cleaning and
inspection, sufficient cleaning holes shall be provided in the shell for these purposes.
(4) Where cross tubes are fitted in Vertical boilers one cleaning hole shall be provided
opposite at least one end of each tube. At the bottom of the narrow water spaces at
least three cleaning holes shall be provided. The cleaning holes shall be so arranged
that the circumferential distance between them does not exceed 91 cm unless the
foundation ring is sufficiently accessible to permit of cleaning and inspection from the
inside of the boiler.750 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Note: Wherever practicable the frames should be secured to the inside of the shells
so that the shorter axis is parallel to the longitudinal centre line of the boiler.
(5) Cleaning holes or mud holes in Loco Tope boilers shall be provided at each bottom
corner of the outer firebox casing, above the firehole ring and on each side of saddle
plate in line with bottom of barrel.
(6) In the case of small boilers or where the foregoing provisions are impracticable the
cleaning holes or mud holes shall be as near as possible in the corner of the outer
firebox casing and the holes as large as circumstances permit.
136. Compensating rings and frames for openings in shells.─ (1) Compensating rings
and frames for openings in shells shall be of same material as that of shell. The
compensation provided shall preferably be flanged frames, which shall be fitted in all cases
where the shell plate exceeds 14 mm thick. Flanged frames shall be weld less and shall be
flanged or pressed to provide a flat jointing surface for the cover.
(2) All compensating rings and frames shall be formed to bed closely to the surfaces to
be connected. Any weld therein shall be on the transverse centre line.
(3) The flat jointing surfaces of all flanged or pressed frames and all doors or covers
shall be machined.
137. Internal doors.─Internal doors shall be of wrought steel in accordance with Chapter-2
and constructed in accordance with the following:-
(1) Doors shall be formed to fit closely to the internal joint surface and should be fitted
with studs, nuts and crossbars;
(2) Doors for circular opening larger than 250 mm or elliptical/rectangular opening
larger than 250 mm x 175 mm shall have two studs but for opening of 250 mm x
170 mm or less only one stud may be fitted. Doors for opening not larger than 123
mm x 90 mm may have the stud forged integrally with door;
(3) Doors studs shall be of welding quality steel having a minimum specified tensile
strength of not less than 36.7 kg/mm2 and those for manholes shall be not less than
30 mmand they shall be fixed in any of the following way:-
(a) screwed through the plate and fillet welded on inside;
(b) fillet welded each side of the plate with a leg length of not less than 10 mm;
(c) attached to the door by an intermediate plate or lugs so that the strength of the
attachment is not less than the strength of the studs and the studs are prevented
from turning; or
(d) provided with an integrated collar and be riveted or screwed onto the door plate
and be prevented from turning in which case the strength of the attachment shall
be not less than the strength of the studs;[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 751
(4) Door spigot when the door is in the central position shall have a clearance of
approximately 105 mm all around and at no point shall the clearance exceed 3 mm.
The spigot depth shall be sufficient to trap the gasket;
(5) The nuts shall be of appropriate material compatible to that of bolts and be placed
on the seating surface;
(6) The cross-bars shall be of substantial proportions and of mild or wrought steel.
Note: Eye bolts of suitable legs on the door plate or headed bolts engaging with slotted
sections on the door plate may be used instead of studs.
(7) The minimum calculated thickness of the door of the flat plat construction (i.e.
unstiffened made from one plate shall be not less than that determined by the
following formula: -
0.35 Pxd² + W
t = -------------------- for a circular door
f
0.35 P (2-a/b) x a² + W
t = ----------------------------- for an elliptical door
f
Where,
t = is the minimum calculated thickness of the flat door (in mm)
P = is the design pressure of boiler in N/mm²
d = is the diameter of the opening to which the door is fitted, if round (in mm)
a = is the minor axis of the opening to which the door is fitted if elliptical (in mm)
b = is the major axis of the opening to which the door is fitted, if elliptical (in mm)
W = is the full load capacity of one stud (effective stud area X design stress value
at design temperature) in N
f = is the maximum permissible stress values as available in the governing codes
of the country of the material to which it belongs in N/mm2
Note: A design stress of value of 50 N/mm2 may be used for carbon steel bolts for design
temperature not exceeding 300°C.
138. Raised manhole frames, cover plates and joint bolts.─ (1) (a) Raised circular
manhole frames not exceeding 406 mm in diameter shall be at least 19 mm thick in all parts.
The circular cover plates and joint flanges for such frames shall be not less than:
25 mm thick for pressures not exceeding 8.4 kg/cm2 (g)
28 mm thick for pressures over 8.4 kg/cm2but not exceeding 14 kg/cm2 (g).
32 mm thick for pressures over 14 kg/cm2 but not exceeding 17.5 kg/cm2 (g).
(b) For pressures 14 kg/cm2 (g) and over raised circular manhole frames shall not be
fitted.
The cover plates shall be secured by at least sixteen steel bolts not less than 25 mm
diameter, such that the stress in the bolts due to steam pressure shall not exceed:-752 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
350 kg/cm2for 25 mm bolts.
421 kg/cm2for 28 mm bolts.
456 kg/cm2for 32 mm bolts
(c) For the purpose of calculation the pressure shall be assumed to act on the whole
area within the pitch circle of the bolts and the bolt area at the bottom of the screw
thread shall be taken.
(2) External raised circular mouthpieces shall be:
(a) formed in one piece without welds,
(b) formed from a suitable rolled section and forge welded, or
(c) Fabricated by fusion welding provided they are stress relieved by heat treatment
after welding and before attaching to the boiler.
(d) Welds shall be positioned so that they are located on the transverse center line of
the boiler. The jointing flanges of mouthpieces and covers shall be machined on
the face and edge and on the bearing surface for the bolts.
(e) Bolts and nuts shall be machined where in contact with the flanges and the joints
should be formed inside and outside the bolts to preclude the possibility of flange
distortion. Cover plates shall be dished outwards to a depth of approximately
one-eighth of the internal diameter of the frames.
(f) All frames and mouthpieces shall be close to the surfaces to which they are to be
connected. All caulking edges shall be machined or machine gas cut.
139. Positions of manhole in shell.─Manholes and other openings in cylindrical shells
shall be placed as far as possible from any seams, preferably towards the back end to the
boiler top. Wherever practicable, oval openings shall be arranged with the minor axis
parallel to the longitudinal centre line of the boiler. In no case shall the circumferential length
of any opening exceed twice the longitudinal width of the opening.
140. Compensation rings to manholes.─Compensation shall be provided in every case for
the part cut of a cylindrical shell for a manhole. The strength of the net section of
compensating ring and also welds securing them to the shell, compared with that part of the
shell cut out, shall not be less than the efficiency of the longitudinal seam.
141. Compensation for cutting large holes in shell type boilers.─Where holes are cut in
the cylindrical shell for the purpose of attaching a seating of frame or door, compensation
shall be provided such that the added sectional area, including parts of the frame within
101.6 mm of the shell shall be not less than the sectional area of the plate removed which
shall be the product of the diameter of the opening and the calculated thickness of the plate
as found by Equation(4/2). Where holes are cut in the cylindrical shell for the purpose of
fixing seating for mountings and the diameter of the holes is greater than 2¼ times thickness
of the shell plate plus 70 mm, compensation shall be provided. Where a large opening is cut
in a cylindrical shell to receive another part of the structure, the sides where cut away shall
be efficiently cross-stayed or strengthened in some other effective manner.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 753
CHAPTER -4
FUSION WELDED DRUMS FOR WATER TUBE BOILERS AND
SUPERHEATERS
142. General requirements.─Where applicable the general terms of Chapter-1 relating to
Certificates from Makers, Inspecting Authorities, etc., and of Chapter-3 concerning
construction shall be followed.
PART-I
143. Materials of constructionfor fusion welded Boiler Drums.─(1) For plates to be
used in the construction of fusion welded boilers drums, requirements of Chapter-2 shall
apply.
(2) Plates having thicknessof more than 50 mm, before being fabricated, shall be uniformly
heat treated to produce grain refinement andheat treatment involving quenching in a liquid
medium is not permitted.
PART-II
144. Fusion Welded Drums.─The term 'Fusion Weld', for the purpose of this Chapter,
isapplicable to all welded joints made by the metal arc process with covered electrodes or
other electric arc process, in which the arc stream and the deposited weld metal are shielded
from atmospheric contamination.
145. This Chapter shall apply to the single run or heavy run welding process and that welded
boiler drums manufactured by that process shall conform with all regulations of this Chapter,
except those in which divergence is necessary solely because of special requirements
essential for the most efficient utilisation of that processand all regulations governing quality
of material, construction workmanship andtesting (both non-destructive and otherwise) are
applicable.
146. Equipment of workshop.─ (1) The welding plant and equipment shallbe of good
quality and maintained in an efficient working condition.
(2) The welding apparatus shallbe installed under cover and shall bearranged so that the
welding work may be carried out in positions free from draughts and adverse weather
conditions.
(3) The procedure shall be such that there is regular and systematic supervision of the
welding works, and the welding operators are subjected to periodic tests for quality of
workmanship by the works officials.
(4) Records of these periodic tests shall be kept and madeavailable by works office to the
Competent Person for scrutiny.754 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
147.Testing Laboratory.─
(1) The works shall be equipped with an efficient testing laboratory which shallinclude
apparatus suitable for carrying out tensile, bend and impact tests, micro-examination of
specimens and x-ray examination of the actual joints in pressure vessels.
(2) The works shallalso be equipped with a suitable heat treating furnace having satisfactory
means for temperature control, but as an alternative arrangement may be made whereby the
drums can be heat-treated elsewhere.
148. Constructional details and preparation for welding.─ (1) Before starting the
construction work, the manufacturer shall furnishto Inspecting Authority, a fully dimensioned
sectional drawing reflecting thereincomplete details of construction of the drumfor approval.
(2) Fully dimensioned drawings of the proposed welds preparations of the main seams
drawn to a scale, clearly reflecting therein all the relevant details shall be furnished.
(3) Sketches showing details of the welds preparations for the attachment of the stand
pipes, branch pipes and seating and their locations relative to the longitudinal and
circumferential seams and to other openings shall be furnished.
149. Preparation of plates.─For the purpose of preparation of plates, requirements
contained underregulation77 shall apply.
150. Cylindrical Shell of Drums.─
(1) Each drum shell plate shall be of cylindrical form to the extreme edges of the plate.
(2) The bending shall be done entirely by machine and local heating or hammering is
prohibited.
(3) Where the plates are bent to an internal diameter less than 20 times of the plate
thickness, they shall be efficiently heat-treated after bending or combined with final post weld
heat treatment.
151. Method of making welded joints.─(1) For the purpose of requisite quality of welding,
the seams may be welded from both sides of the plate or from one side of the plate with or
without a backing strip and If a backing strip is used, it shall be removed and the surface so
exposed shall be dressed.
(2) Additional runs of metal shall be deposited at the surface of the welded seams so that
the welded metal at the level of the surfaces of the plate is refined as far as possible.
(3)Thickness of such additional welding shall not exceed values given in Table 4/1below.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 755
Table 4/1
Serial Maximum reinforcement in mm
Number Nominal
thickness in mm Circumferential joint in
Other Welds
Pipe and tubing
(1) (2) (3) (4)
(i) Upto 3 2.5 2.5
(ii) O ver 3 to 5 incl. 3.0 2.5
(iii) Over 5 to 13
4.0 2.5
incl
(iv) O ver 13 to 25
5.0 2.5
incl
(v) Over 25 to 50
6.0 3.0
incl
(vi) Over 50 to 75
Note 4.0
incl
(vii) Over 75 to 100
Note 5.5
incl
(viii) Over 100 to 125
Note 6.0
incl
(ix) Over 125 Note 8.0
Note – The greater of 6 mm or 1/8 times width of weld in mm
(4)The surfaces of the welds which are to be subsequently radiographed shall be sufficiently
free from coarse ripples, overlap, grooves, abrupt ridges and valleys, so as to avoid stress
raisers and to permit proper interpretation of radiographs and other Non-Destructive
Testing(NDT) methods. If there is a question regarding the surface condition of the weld
when interpreting a radiographic film, the film shall be compared to the actual weld surface
or provide smooth contours and to be flush with the respective surfaces of the plate before
radiography examination is done.
(5) Undercut shall not exceed 0.8mm or 10% of wall thickness, whichever is less and
undercut shall not encroach on design wall thickness.
(6) When affixing standpipes, branch pipes, seating, compensating plates, doubling plates or
manhole frames, not less than two runs of metal shall be deposited at each weld.
(7) Each run of weld shall be thoroughly cleaned and free from slag that may adversely
affect the quality of the succeeding runs.
(8) Welds shall be marked permanently to facilitate their location.756 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
152. Type of welded joints.─The longitudinal and circumferential seams shall be made
with butt joints of the single or double U or Vee type.
153. Number of joints.─Where, having regard to the approved design, the dimensions are
such that the shell cannot be made from a single plate, it shall be made with the minimum
number of joints and the longitudinal seams in successive rings shall not fall in line, except
where the rings of the drum are in two halves of unequal thickness.
154. Position of the tube holes.─(1) Tube holes in welded seams shall be avoided as far
as possible.Where the holes are unavoidable, they may be machined through welded seams
after these seams are radiographed.
(2) In the case of vanadium steels, in addition to radiography, the welded seams shall be
stress relieved.
(3) The efficiency of the ligament in the direction of weld shall be multiplied by a weld factor
not exceeding 0.95 except where the distance from the edge of the tube hole to the edge of
the weld is greater than 13 mm.
(4) The edge of the weld shall be considered to be the edge of the weld groove as machined
in the plate prior to welding.
Notwithstanding anything in this regulation, efficiency of the ligament in the direction
of weld shall not be multiplied by a weld factor 0.95 where 100 percent radiography of weld
joint is done.
155. Circularity of drums.─
(1) (a)The difference between the internal diameter of the drum measured at any cross-
section and the nominal internal diameter of the drum shall not exceed 1 per cent of the
latter.
(b) Any departure of profile measured on the outside of the drum with a gauge of the
designed form of the exterior of the drum and of length equal to a quarter of the internal
diameter, shall not exceed the percentage given in Table 4/2 below:
Table 4/2
Serial Nominal internal diameter of Percentage of nominal internal
Number drum diameter
(1) (2) (3)
(i) Up to and including 915 mm 0.375
(ii) Over 915 mm up to and
0.35
including 1150 mm
(iii) Over 1150 mm 0.3
Flats at the welded seams shall not be permitted and any local departure from
circularity shall be gradual.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 757
(2) (a)The deviation from circularity in any section shall, in the case of normalised drums,
not exceed 2% and in case of stress relieved drum 1% and the deviation from a
straight line shall not exceed 0.3% of the cylindrical length.
(b) (i) In order to determine the deviation from circularity of the drums the maximum
and minimum internal diameter at one cross section shall be measured.
(ii) From these measured values the percentage deviation from circularity shall be
calculated according to the following formula, ─
2(d – d )
max min
C = ------------------- 100
(d + d )
max min
Where, C = percentage deviation from circularity of the drums.
d = internal diameter at one cross-section.
(c)In order to determine the deviation from a straight line, a stretched line should be
placed longitudinally against the sides and its largest distance from the shell line
concerned shall be measured. From this distance, and from the cylindrical shell, the
deviation from the straight line shall be calculated.
156. Mechanical test and test plates of fusion welded seams.─(1) Fusion welded joints
shall comply with the mechanical tests herein specified. Not less than one set of test plates
shall be provided to represent the welding of each longitudinal seam and the test plates may
by attached at each end of the longitudinal seam or the set may be located at one end only.
(2) Where the drum shell is formed in two or more courses, the staggered longitudinal seam
shall be regarded as a continuous longitudinal seam provided the welding be effected in
one reasonably continuous operation and by the same operator or operators.
(3) Where there are circumferential seams only or where the method of welding the
circumferential seam differ from that employed for the longitudinal seams, the method of
providing the test plates shall be decided by the Inspecting authority.
(4) (a) The test plates shall be of a size sufficient for the preparation of the test pieces
specified in sub-regulation(1)of regulation 157and for any repeat test pieces that may be
required.
(b) The material for each set of test plates shall be cut from the respective plate or plates
forming the appropriate seam, and before begin cut shall be stamped by the Competent
Person.
(5) When the analysis of the plate is approved by the Inspecting authority and is considered
sufficiently similar, the test plates may be cut from one drum shell plate only.
(6) In the case of insufficient material being available on the shell plate to permit the cutting
of test pieces, these shall be acceptable if they are made from another plate provided it is
made from the same cast.
(7) (a) The weld groove in the test plates shall be similar to that adopted for the
corresponding edges of the longitudinal seam, and the respective fusion faces shall be in
continuous alignment.
(b) The test plates shall be reinforced or supported during welding in order to prevent
under warping.758 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(c) The weld metal in the plates and the seam shall be of the same grade of electrode
and shall be deposited continuously at the same operation.
(8) The weld in any test plate shall not be repaired unless agreed by the Inspecting Authority
and the repairs shall be done in such a manner as will ensure that the repaired seam in
the test plate is still representative of the material in the main seam.
(9) Where it is desired to straighten test plates which have warped during welding they may
be straightened at a temperature below the temperature of heat treatment of the drum to
which they belong. Straightening shall take place before final heat treatment.
(10) Heat treatment requirements shall comply with regulation 123.
(11) If any defects in the weld metal of a test plate are revealed by radiographical
examination, the position of these shall be clearly marked on the plate and test pieces
shall be selected from such parts of the test plates as may be decided by the Inspecting
Authority.
157. Selection of test pieces*.─(1) From the test plates or plates on each longitudinal
seam, test pieces shall be selected for the following tests, the specimens being cut out as
showing Figs. 4/1 and 4/2 and stamped by the Competent Person for identification.
(a) One tensile test specimen for the welded joint.
(b) One all-weld metal tensile test specimen.
(c) Two bend test specimens.
(d) Three notched-bar impact test specimens.
(e) One specimen for micro and macro examination.
All dimensions are in mm.
1. Tensile test for joint
2. Tensile test for all-weld metal
3. Bend test, outer and inner surfaces of plate (at weld)
4. Notched bar impact test specimen.
5. Micro and macro specimen.
Fig. 4/1: Details of Test Plates[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 759
All dimensions are in mm.
1. Tensile test for joint. 4. (a) Charpy impact test, outer surface
2. Tensile test for all-weld metal of plate.
3. Bend test, outer and inner surfaces (b) Charpy impact test, inner surface
of plate (at weld) of plate.
5. Micro and macro specimen.
Fig. 4/2: Details of Test Plates
*Examples showing approximate dispositions of the test pieces in the test plates are shown
in Figs. 4/1 and 4/2.
The remainder of each set of test plates shall be retained for any retests required.
Any specimen for re-test shall be cut off from the same set of test plate, as the
original specimen.
(2) Surfaces of tensile, bend and impact test specimens corresponding with the outside
of the drums shall be only lightly dressed so that the rolled surface of the parent
metal is not wholly removed, except that where the rolled surfaces of the abutting
plates are not level with one another, one plate may be machined at each face of the
weld provided the depth of metal removed does not exceed 0.8 mm.
158. Tensile test pieces.─(1) (a)The dimension of the reduced tensile section shall be as
shown in Fig.4/3and the width of the reduced section shall be at least 25 mm.
(b) If the thickness of the plate does not exceed 30 mm, the thickness of the specimen
shall be equal to the plate thickness and the plate surface of the specimen shall be
machined to take away the surface irregularities of the plate and the weld.
All dimensions are in mm.760 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 4/3: Reduced Section Tensile Specimen
(c)If the plate thickness exceeds 30 mm, the tensile test shall be carried out on
several reduced section specimens, each having a thickness of at least 30 mm and a
width at the effective cross-section of at least 25 mm. These Specimens shall be
taken out of the test piece in such a way that the tensile test covers the whole
thickness of the weld joints as shown in Fig. 4/4. In this case the result of the test of
every test specimen concerned shall meet the requirements specified in sub-
regulation (1) of regulation 159.
All dimensions are in mm.
Fig. 4/4: Reduced Section Tensile Specimen in Thick Plate
All dimensions are in mm.
Fig. 4/5: All-Weld Metal Test Specimen
(2) The dimensions of the all weld metal tensile test specimens shall be those given in
Fig. 4/5.The diameter shall be the maximum possible, consistent with the cross-
section of the weld but in no case more than 20 mm. The gauge length shall be equal
to five times the diameter.
159. Tensile tests.─(1)The tensile strength of different grades of material shall be within the
limits specified in regulation 37.
(2) The upper yield point at room temperature shall be not less than 50% of the specified
minimum tensile strength at room temperature.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 761
(3) The breaking elongation in percentage shall be not less than (N-Rm)/C
Where Rm = Tensile strength at room temperature in kgf/mm2
N = a quality index of 100 for plate thickness upto 50 mm or 95 for plate thickness
over 50mm.
C = 2.2 for only gauge lengths of L = 5 d or L =5.65/ A
o
Where L = gauge length
A = original cross section of the rectangular test piece.
d = original diameter of the round test piece.
NOTE: C= 1.9 for gauge lengths of 4 A for test piece of Appendix-D.
(4) The minimum values of the stress at proof limit 0.2% at elevated temperature (E) may be
t
calculated by multiplying the minimum specified tensile strength at room temperature
(R ) by the value of the ratio (E/R ) given in the Table 2/5 in regulation 37.
20 t 20
160. Bend test pieces.─(1)One for direct and one for reverse bending shall be taken
transversely to the weld and where the thickness of the plate permits, one should be above
the other. The specimens shall be rectangular in section so as to have width equal to one
and half times the thickness of the specimen but not less than 30 mm. The surface of the
specimens shall be machined just to remove the surface irregularities of the plate and the
weld. The corners of the specimens shall be rounded to a radius not exceeding 10% of the
thickness of the specimen.
(2) Where plate thicknesses do not exceed 38 mm, the thickness of the specimen shall be
equal to the full thickness of the test plate. Where the plate thickness exceeds 38 mm, the
specimen shall in all cases have a thickness of at least 38 mm. The specimen to be
tested with the outer surface of the weld in tension shall be prepared by cutting to waste
the metal local to the inner surface of the weld so that the desired specimen thickness is
obtained (see Fig.4/6, Specimen A). The specimen to be tested with the inner surface in
tension shall be prepared by cutting to waste the metal local to the outer surface of the
weld so that the desired specimen thickness is obtained (see Fig. 4/6, Specimen B).
Where the thickness of the plate permits, both specimens may be cut from the same
piece of plate, the specimen being located in the plate one above the other (see Fig. 4/6,
Specimen C).762 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
All dimensions are in mm.
Fig. 4/6: Specimen Three Bend Test
161. Bend tests.─ (1)The specimen shall be mounted in such a way that the axis of the
former is in the middle of the weld, and on roller supports the faces of which are separated
by a distance determined by the thickness of the specimen.
(2) The best specimen shall be pushed through the supports by a former having a
diameter also determined by the thickness of the specimen. The requirements of table 4/3
givenbelow, relating tothe thickness of test specimen, shall apply.
(3)On completion of the test, no crack or defect on the outer surface of the specimen
shall be greater than 1.5 mm measured across the specimen, or 3 mm measured along the
specimen. Premature failure at the comers of the specimen shall not be considered as a
cause for rejection.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 763
Table 4/3: Bend Test Requirements
Serial Specified minimum tensile Diameter of Free space between
Number strength of plate Former support at the end of list
(1) (2) (3) (4)
(i) Below 44 kgf/mm2 2 T 4.2 T
(ii) From 44 to 54 kgf/mm2 3 T 5.2 T
(iii) Above 54 kgf/mm2 4 T 6.2 T
162. Notched-bar-impact test.─ (1) The notched bar impact test specimens shall be of the
type and dimension asshown in Fig.4/7, the notch shall be contained in the weld-metal at
approximately the axis of the weld and the axis of the notch is to be perpendicular to the
surface of the plate.
(2)The test shall be carried out as follows:
For the V-Notch specimen at a temperature of 20 ± 2°C. In the case of V-Notch
specimen, the machining of the bottom of the notch shall be done very carefully.The
minimum result to be obtained from the Impact test pieces shall be:
(a) V-Notch specimen: 3.46 kgfm/cm2
(b) One test shall consist of three test specimens and the value specified above is the
average of three specimen values.
(c) Out of the three values, no single value shall be less than one third of the average
value.
Note: Above value is equivalent to 2.76 kgfm divided by sectional area below the notch.
All dimensions are in mm.
Fig. 4/7: Standard V-Notch Test Piece
163. Additional tests before rejection.─ (1) In case any of the test specimens taken in
accordance with regulations 156 to 162 fail to meet the specified requirements,one retest
shall be allowed for each specimen that fails, provided the following minimum figures have
been obtained.
(a) Reduction in area 30 per cent.764 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) Any other test except the bend and impact tests, 90 percent of the specified
requirements.
(2) In case a cold bend specimen fail to meet the specified requirements, two re-tests
shall be taken from the same test plate and these shall comply with the requirements
of regulations 160 and 161.
(3) If Charpy impact test fails to meet the specified requirements, two re-tests shall be
taken from the test plateon each side of the original specimen and separated from it
by not more than 5 mm. Both re-tests shall show a minimum Charpy impact test
value of 2.76 kgfm.
(4) If it is found that there is insufficient metal to permit the preparation of specimen for
re-test from the reminder of the test may be cut from the test plate relating to the
opposite and of the same longitudinal seam.
164. Non-Destructive test.─ (1) Micro and Macro Examination─ A specimen, the full
thickness of the plate and not less than 13 mm wide may be taken from each set of test
plates by the Inspecting Authority for the purpose of micro and macro examination.Macro-
etching of a complete cross-section of the weld including the heat effected zone, should
show satisfactory penetration, fusion and absence of significant inclusions or other defects.
In case of a doubt as to the condition of the weld as shown by micro-etching, the area
concerned shall be microscopically examined for defect investigation.
(2) Radiographical examination─(a) Every portion of the longitudinal and circumferential
welded joints of the drums shall be subjected to radiographical examination or ultrasonic
examination. Where ultrasonic examinations isused,it shall be demonstrated to the
satisfaction of the Inspecting Authority that the equipment and the technique used are
satisfactory. The manufacturer shall ensure that the operator employed is competent to
use the equipment, apply the technique and interpret the results of the examination.
NDE operator and evaluator shall possess qualification as per ASNT SNT-TC-1A or ISO
9712 or equivalent.
(b) The method employed in obtaining the radiographs shall be such as to show clearly
defects having a magnitude equal to 2 per cent of the thickness of the welded joint. To
determine whether this result is being obtained and indicator of approved form which
includes a portion equivalent to not more than 2 per cent of the joint thickness, shall be
placed in the vicinity of the weld so as to make a record on each radiograph. Each
section of every weld shall be marked so that the radiographs can be easily correlated
to the particular part of the joint represented. Radiographic or Ultrasonic testing shall
be carried out as per written down procedure specifying technique, IQI sensitivity,
density requirements and acceptance norms in line with established International
boiler codes subject to acceptance by the Competent person.
(c)The examination shall be made from the original films and the acceptability of the
welds shall be rejected or dealt with under regulation 165 and be radiographed again.
(d) PAUT or TOFD or both in lieu of Radiographic test may be used subject to
establishing a procedure to include techniques, set ups, calibrations, operator
qualification, acceptance norms in line with International Codes.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 765
(3) Magnetic Particle Flaw Detection- Magnetic method of flaw detection shall be employed
wherever possible for ferritic steel.
(4) Dye-Penetrate Flaw Detection- Dye penetrants or equivalent method of flaw detection
shall be employed for Austenitic or other non-magnetic steel.
(5) All butt welded joints shall be subjected to non-destructive examination by radiographic,
radioscopy or other approved methods such as ultrasonic testing, magnetic particle
inspection or liquid dye penetrant inspection. When radioscopic examination is to be
performed in lieu of radiography on welded components, the following requirements shall
be met, namely:-
(a) A written procedure shall be submitted for approval to the Inspecting Authority
which shall contain the following:
(i) material and the thickness range;
(ii) equipment qualifications;
(iii) test object scan plan;
(iv) radioscopic parameters;
(v) image processing parameters;
(vi) image display parameters;
(vii) image archiving requirements;
(viii) accept-reject criteria (Code reference);
(ix) performance evaluation;
(x) Operator identification.
(b) The system shall be aided with an image processor to enhance the quality of the
radioscopic images and system performance quality shall exhibit:
(i) a thin section contrast sensitivity of 3%;
(ii) a thick section contrast sensitivity of 2%;
(iii) a spatial resolution of 3 line pairs per mm;
(iv) IQI sensitivity - 2% of the joint thickness when wire IQI's are to be used,
the wire diameter axis shall be oriented along the axis of the least
sensitivity of the system.
(c) Radioscopes shall be properly marked to co-relate with particular part of joint
represented.
(d) The radioscopic examination data shall be recorded and stored on videotape,
magnetic disk or optical disk or any other electronic storage device at the maker's
plant for a sufficient period after the date of radioscopic examination as specified
by the Inspecting Authority, Efficient radioscopic examination record recall shall
be made available at any time over the record retention period and shall be
traceable to the test objects.
(e) When repair has been performed as a result of radioscopic examination, the
repaired areas shall be re-examined using the same radioscopic technique to
evaluate the effectiveness of the repair.
(f) To aid in proper interpretation of the radioscopic examination data, the details of
the technique used shall accompany the data. As a minimum, the information
shall include the approved procedure requirements and system performance test
data.766 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
165. General.─ (1) (a) Any repair to a weld carried out by the manufacturer shall first be
agreed to by the Inspecting Authority.
(b)Where defects occur in distributed positions in a seam, repairs to the extent of 15 per
cent, of the total length of the seam shall be permitted to replace the defective welding.
(c)Where defects are located in a single continuous length, the permissible extent of
repair shall be decided by the Inspecting Authority.
(2) Where the weld metal in any way fails to comply with the requirements specified, the
whole of the weld metal may be removed and the seam re-welded provided that;
(a) the original test plates are similarly treated, or
(b) New test plates of the same thickness as the joint and of similar quality of material
are attached to the end of the seam and re-welded with it.
(c)In either case the plates shall be tested in accordance with regulations 156 to
164andthe requirement for heat treatment shall be in accordance with regulation 166.
(3) With regard to the extent of permissible repair and when agreed by the Inspecting
Authority,a circumferential seam shall be treated in the same manner as a longitudinal
seam. The Inspecting Authority shall be entitled to call for representative tests for a re-
welded circumferential seam.
(4) Defects shall be cut out by chipping of machining or by burning out by the Air Arc Weld
Process.
(5) Where a defective part has been cut out, the Inspecting Authority shall be entitled to make
an examination before re-welding.
(6) Only metallic arc welding shall be used for repairs.
(7) All repaired areas shall be subjected to radiographical examination or radioscopic
examination by the approved techniques.
(8) The Inspecting Authority shall be entitled to call for specimen representing any welded
repair, for the purpose of examination and test.
(9) On completion of all welded repairs, the manufacturers shall, if requested, supply for record
purposes a detailed diagram showing the positions, length depth and width of all such
repairs.
166. Heat treatment.─(1) (a)After completion of the welding of the seams and the welding on
the stand pipes and including welding repairs but before the hydraulic test, each drum shall
be heat treated for stress relieving; during this heat treatment the official test plates shall be
lying inside the drum.
(b)For heat treatment requirements refer regulation 123.
(2) Where shell is subjected to a primary stress relieving treatment identical to the final heat
treatment to be given to the drum, the test plates may be placed inside the shell during[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 767
the primary treatment and thereafter cut up and tested without waiting for the final
treatment of the drum.
(3) Where the shell is not subjected to primary stress relieving treatment or is subject to a
primary stress relieving treatment which is not identical with the final heat treatment the
test plates may be placed inside any other drum of comparable dimensions which is to be
heat treated in accordance with this Chapter. The heat treatment is to take place in the
furnace in which the drum relating to the test plates will eventually be given its final heat
treatment.
(4) Temperature charts shall be submitted to indicate that the test plates and the drum they
represent have been subjected to identical heating soaking and cooling treatment.
(5) (a) For the heat treatment, the drum shall be placed in a furnace sufficiently larger to
accommodate the whole drum.
(b) The furnace shall have proper means of temperature measurement and control and
shall be capable of heating the whole of the drum to a uniform temperature. It shall be
so designed as to prevent direct impingement of flame on the drum.
(c) Thermocouples shall be attached to the drum at appropriate locations.A temperature
time diagram of the stress-relieving process shall be provided for a welded shell or drum
and a similar diagram for other welded pressure part shall be provided where inspecting
Authority requires it.
(6) Alternative procedure for the heat treatment of the drum may be submitted to the
inspecting Authority for approval.
(7) In special cases it may be permissible to heat treat the test plates separately from the
drum, provided the inspecting Authority is satisfied with the means adopted to ensure
that the following factors shall be the same for the drum as for the test plates, namely:-
(i) Rate of heating
(ii) Maximum temperature
(iii) Time held at maximum temperature
(iv) Conditions of cooling.
167. Hydraulic test at makers’ works.─ (1) Boiler drum having internal diameter greater
than 600 mm and other cylindrical component having internal diameters greater than 1000
mm shall be hydraulically tested on completion of manufacture at the makers works in the
presence of Competent Person to 1½ times the maximum allowable working pressure
without indication of weakness and defects.
(2) All components which are not reasonably accessible for inspection after assembly into
the boiler or have been tested hydraulically prior to welding at a pressure less than that
specified in sub-regulation (1)shall be tested hydraulically to 1½ times the maximum
allowable working pressure before assembly into the boiler.
(3) Tubular products that have been hydraulically tested to the required pressure prior to
welding or ultrasonically tested shall not require further hydraulic testing as components
provided they were joined during assembly by circumferential butt joint which have been
welded and non-destructively tested as per relevant provisions of these regulations.768 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) Components other than tubular products shall not require hydraulic testing before
assembly into the boiler if the completed boiler is tested hydraulically to 1½ times the design
pressure at site.
(5) In case of drums, headers which are to be fitted with tubes, the test may be made
before drilling of tube holes but after attachments of nozzles and similar fittings.
(6) The test pressure shall be raised gradually under proper control at all times so that it
never exceeds by more than 6% of the required pressure and maintained for 30 minutes
whereupon the pressure shall be reduced to maximum allowable working pressure and
maintained for sufficient time to permit close visual inspection for leakages of the pressure
parts.
(7) The temperature of water used as medium of pressure testing shall not be less than
20°C and more than 50°C.
(8) (a) In case of drums of ‗composite‘ construction and partly reverted and partly welded
seams or seamless forged drum shell with ends attached by fusion welding.
(b) The test pressure shall be the same as for fusion welded drums.
(9) In case the hydraulic test reveal any defects in the welded steam, it shall not be
repaired unless the Inspecting Authority permits to do so.
(10) On completion of agreed repairs to a drum which has previously been stress relieved
by heat treatment, further heat-treatment, if required by the Inspecting Authority shall be done
and the drum shall again be subjected to hydraulic test.
PART-III
168. Inspection during construction.─Inspection during construction and fees therefor
shall be governed in accordance with the provisions of Appendix-A and regulation 324.
PART-IV
MAXIMUM ALLOWABLE WORKING PRESSURE OF WATER TUBE BOILERS WITH
FUSION WELDED DRUMS SHELLS
169. Shell of steam and water drums.─(1)(a)The maximum allowable working pressure
shall be determined by the following formula:
2fE (T – 0.75)
P = ------------------- Equation (4/1)
D + (T – 0.75)
Where, P = Maximum Allowable Working pressure in kg/cm2 (g)
T = Actual thickness of shell in mm,[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 769
D = maximum internal diameter of shell in mm,
F = permissible working stress in kg/cm2 (g) at working
metal temperature (see regulation 170),
E =the efficiency of ligaments between the tube holes or other
uncompensated opening in shell, or the weld factor of the
longitudinal joints,
For Class I boilers, the weld factor shall be taken as 1, In
the particular case of an unpierced wrapper plate of a fusion
welded drum,
E = 1,
(b) The minimum required thickness of shell shall be determined using the
following formula:
Equation (4/2)
-
Where
t = Calculated minimum required thickness of the shell in mm,
P = Maximum Allowable Working pressure in kg/cm2 (g)
D = maximum internal diameter of shell in mm,
f = permissible working stress in kg/cm2 (g) at working metal temperature (see
regulation 170),
E = Ligament efficiency as per regulation 171).
Irrespective of the thickness obtained by the use of the foregoing formula ―t‖ shall not
be less than: -
(i) For tube plates (where the tubes are expanded therein) the thickness shall be
at least such as to allow a minimum parallel belt width of tube seat of 10 mm,
this seating to be measured as explained below.
(ii) All tubes shall be carefully expanded into the holes in the tube plates. The
tubes shall be belled or beaded to resist withdrawal and if belled they shall
project through the parallel tube seat at least 6 mm.770 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) The belling shall be as shown in Table 4/4 below:
TABLE 4/4
Serial Number Outside diameter of tube Amount of diameter of belling
over diameter of the tube hole
(in) mm
(1) (2) (3)
(i) Upto and including 38 mm 2 mm
(ii) Over 38 mm upto and 3 mm
including 50 mm
(iii) Over 50 mm upto and 4 mm
including 83 mm
(iv) Over 83 mm upto and 5 mm
including 101 mm
(3) The tube holes in the tube plates of drums pockets of headers shall be formed in
such away that the tubes can be effectively tightened in them. Where the tube ends
are not normal to the tube plate, there shall be a neck or belt of parallel seating at
right angle to the axis of the tube at least 13 mm in depth measured in a prime
containing the axis of the tube at the hole.
(4) Where the tubes are practically normal to the tube plate or the header, this parallel
seating shall, where or practicable be not less than 10 mm in depth.
170. Permissible working stresses for shells of boiler and integral super heater drums
and headers.─(1) The maximum permissible stress for drum shells and headers shall be
taken as available in governing Boiler codes of the country of the material to which it
belongs. In case of non-availability of the value, the following procedure for evaluating shall
be adopted.
(i) For temperatures at or below 454°C, the smaller of the two values:-
E R
t
f = ------ or ------
1.5 2.7
(ii) For temperatures above 454°C, the least of the following three values:-
E S
t r
(a) ------ (b) ------ (c) S
c
1.5 1.5
Where,
t = Working metal temperature,
R = Minimum specified tensile strength of the steel at room temperature,[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 771
E = Minimum specified Yield point at room temperature,
E = Yield Point (0.2% proof stress) at the temperature 't',
t
S = The average stress to produce an elongation of 1% (creep) in 100,000
c
hours at temperature ‘t‘,
S = The average stress to produce rupture in 100,000 hours at the
r
temperature 't' and in no case more than 1.33 times the lowest stress to
produce rupture at the temperature.
Note: In case Sc values are not available in Material Standard and such
materials are known to have been used in boilers in India or abroad, then for
such materials the allowable stress may be taken as the lower of
E S
t r
------ or ------
1.5 1.5
(2) For fusion welded drums, when the wall thickness exceed 60 mm, a deduction of 1
per cent in the value of "f" so determined shall be made for each increase of 5 mm in
the thickness. Such deduction need not be made provided the minimum specified
values of R and E at any part of the section of the steel plate used in the manufacture
of the Boiler drum are guaranteed by a "Well known Steel Maker" or certified by an
Inspecting Authority.
(3) The working metal temperature shall be taken as:-
(a) For saturated steam, water and mud drums, the saturation temperature
corresponding to the pressure WP plus 28°C.
(b) For superheated steam the designed maximum steam temperature for
that drum plus 28°C.
(4) Where the drums are adequately protected from the gases of combustion or swept
by such gasses in the third or subsequent pass of a boiler, the working metal
temperature shall be taken as the saturation or designed maximum steam
temperature as defined above, whichever applies. A covering of refractory or
insulating material which may be liable to become dislodged shall not be deemed
adequate protection.
NOTE: Where steels are for service at temperatures in excess of 370°C it shall be so stated as the
silicon content shall be 0.10 per cent minimum or alternatively the material must pass the "Proof Test
for Creep Quality of Carbon Steel Plate of Boiler Plate Quality" as in the Appendix-E.
171.Efficiency of ligament.─When a shell or drum is drilled for tubes in a line parallel to the
axis of the shell or drum, the efficiency of the ligament between the tube holes shall be
determined as follows:
(a) When a pitch of the tube holes on every row is equal (as in Fig. 4/8), the formula
is:
p – d
------ = efficiency of ligament Equation (4/3)
p
Where,772 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
p = pitch of tube holes, mm.
d = diameter of tube holes, mm.
The pitch of tube holes shall be measured either on the flat plate before
rolling or on the median line after rolling.
Example: Pitch of tube holes in the drums as shown in Fig. 4/8 = 133.3 mm.
Diameter of tube = 82.5 mm. Diameter of tube holes = 83.3 mm.
p – d 133.3 - 83.3
------ = ---------------- = 0.375, efficiency of ligament.
p 133.3
Fig. 4/8 – EXAMPLE OF TUBES SPACING WITH PITCH OF HOLES EQUAL IN EVERY
ROW
(b) When the pitch of tube holes on any one row in unequal (as in Fig. 4/9 &4/10),
the formula is:
p - nd
-------- = efficiency of ligament Equation (4/4)
p
Where,
p = unit length of ligament, mm.
n = number of tube holes in length p.
d = diameter of tube holes, mm.
Example: Spacing shown in Fig. 4/9 Diameter of Tube hole = 83.3 mm
p – nd 304.8 – (2 x 83.3)
------ = ------------------- = 0.453, efficiency of ligament.
p 304.8[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 773
FIG. 4/9 – EXAMPLE OF TUBES SPACING WITH PITCH OF HOLES UNEQUAL IN
EVERY ROW
Example: Spacing shown in Fig. 4/10 Diameter of tube hole = 83.3 mm
p – nd 742.9 – (5 x 83.3)
------ = --------------------- = 0.439, efficiency of ligament.
p 742.9
FIG. 4/10 – EXAMPLE OF TUBE SPACING WITH PITCH OF HOLES VARYING IN
SECOND AND THIRD ROW
(c) The strength of those ligaments between the tube holes which are subjected to a
longitudinal stress shall be at least one-half times the required strength of those
ligaments which come between the tube holes which are subjected to a
circumferential stress.
(d) (i) When bending stresses due to weight are negligible and the tube holes are
arranged along a diagonal line with respect to the longitudinal axis, the efficiency
(z) of corresponding ligaments is given in Fig. 4/11, with the ratio b/a on the
abscissa and the ratio
2a – d d
------- or -- used as a parameter.
2a a774 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Where, a and b are measured as shown in Figs. 4/13 and 4/14,
d = diameter of the tube holes.
Notes: 1. The dimension should be measured either on the flat plate before rolling or
on the medium line after rolling.
2. The data given on Fig. 4/11 are based on the following formulae:
√( )
Where,
( )
( ) ( )
( )
√ √
( = angle of centre line of cylinder to centre line of diagonal holes).
(ii) The same rule as in paragraph (i) should apply for the case of drilling holes to a
regular saw- tooth shown in Fig. 4/15.
(iii) In the case of a regular staggered spacing of tube holes (see Fig. 4/13, the
smallest value of the efficiency z of all the ligaments, longitudinal,
circumferential and diagonal, is given in Fig. 4/12 by the ratio P /P on the
c L
abscissa, and the ratio
P – d d
L
------- or -- used as a parameter.
P a
L
Where,
d = diameter of tube holes, mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 775
P = 2b = twice the distance between circumferential rows of holes;
c
P = 2a = twice the distance between axial row holes;
L
Note: The dimension P should be measured on the flat plate before rolling or on
c
the medium line after rolling. The data on Fig. 4/12 are based on the same
formulae as shown in Fig. 4/13.
(e) When holes spaced longitudinally along a drum are hot in a straight line, the
equivalent longitudinal pitch for each spacing may be used in the application of
the above rules. The equivalent pitch is obtained by multi plying the actual
longitudinal pitch by the equivalent efficiency obtained from Fig. 4/11 for each
spacing.776 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
EFFICIENCY
Fig. 4/11: Efficiency of Ligament along a Diagonal Line[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 777
Fig. 4/12: Efficiency of Ligaments between Holes778 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 4/13: Regular Staggering of Holes Fig. 4/14: Regular Saw-Tooth Pattern of Holes
Fig. 4/15: Regular Saw-Tooth Pattern of Holes
172. Longitudinal stress.─ (1) Notwithstanding the maximum allowable working pressure
as calculated by equation (4/1), the thickness of drum or cylindrical header shells shall be
such that in no case does the longitudinal stress resulting from the combination of stress
arising from internal steam pressure, the self-weight of the drum or header and its contents
and all externally applied loads, exceed the permissible working stress corresponding to the
working metal temperature as prescribed in regulation 170.
(2) The maximum direct longitudinal stress due to the internal steam pressure acting on
the drum ends shall be calculated as follows:
PD2
f = ---------- Equation (4/5)
d
1.273A
Where,
f = Maximum direct longitudinal stress in kg/cm2,
d
P = Maximum Allowable Working Pressure in kg/cm2 (g),
D = Internal diameter of the drum or header in cm,
A = Net cross-sectional area of the drum or header in cm2 taken through the tube
holes in a plane at right angles to its axis.
(3) The resultant bending moments M at any section shall be the algebraic sum of the
bending moments due to the eccentricity of the end pressure and that due to the
externally applied loads.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 779
M = M + M Equation (4/6)
e w
The bending moment due to the eccentricity of end pressure shall be calculated
as follows.
PD2 .e
M = ---------- Equation (4/7)
e
1.273
Where,
M = Resultant bending moment due to eccentricity in kgf-cm,
e
P = Maximum Allowable Working Pressure in kg/cm2 (g),
D = Internal diameter of drum or header in cm,
e = Eccentricity of the net cross-section i.e., the distance from the neutral axis of
the net cross section to the drum or header axis in cm.
The bending moment (M ) due to externally applied loads shall be calculated by
w
treating the drum or header as a beam carrying the externally applied loads,
including the self-weight of the drum or header and its contents under working
conditions.
(4) The stress due to bending shall be calculated as follows:
M Y
r
f = -------- Equation (4/8)
b
I
Where,
f = Stress due to bending in kg/cm2.
b
M= resultant bending moment at the section in kgf-cm,
r
Y= Distance from the neutral axis of the net cross-section to the extreme fiber of the
drum of header shell in cm.
I = Moment of inertia of the net cross-section taken about its neutral axis in (cm4).
The resultant longitudinal stress is the algebraic sum of the stresses given under
(2)and(4).
(5) In calculating the longitudinal stress due to bending in a drum supported at or near its
ends and connected to a lower drum by a bank of tubes (so arranged as to form
substantial struts between the drums) the value of the moment of inertia I used in
a
the formula in sub-regulation (4) shall be : -
Moment of inertia of upper drum (I ) plus a proportion (S) of the moment of
b
inertia of lower drum (I ).
c
2
S = 1 - ----- Equation (4/9)
240780 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Where, the angle in degrees between the vertical and the line joining the
centers of the upper and lower drums. Where is equal to or greater than 15½°; S
shall is be taken as 0. In no case shall the actual value of I used in Equation(4/8) be
a
taken as more than 1.33 times the moment of inertia of the upper drum (I ).
b
In the foregoing, unless otherwise agreed the term ―bank of tubes‖ shall be
defined as consisting of four or more rows of tubes extending over at least three
quarters of the drum length between supports, and pitched longitudinally at not
greater than an average pitch of four tube diameters.
173. Intermediate boiler drum supports.─Where a boiler drum is supported at
Intermediate points in its length at a distance greater than one internal diameter from the end
of the parallel portion of the drum shell, the shell shall be thickened locally to the supports or
so designed that when the local stress set up by the supports in the drum shell are added,
algebraically to those caused by the internal steam pressure and supported loads, the
maximum resultant stress does not exceed the permissible working stress at the working
metal temperature.
PART-V
174. Shape of dished end plate.─When the end plate is dished to semi-ellipsodial, partial
spherical or hemispherical form, it shall comply with the following: (see Fig. 4/16, 4/17, and
4/18);
Fig. 4/16: Elliptical Head Fig. 4/17: TorisphericalHead
Fig. 4/18: Head with Manhole (Elliptical or Torispherical)
(a) Hemispherical heads without limitation;
(b) Elliptical heads sufficiently dished so that H ≥ 0.2 D;
(c) Partial spherical heads satisfying all the following requirements:
r 0.1 D
r 3 T[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 781
R D
H 0.18D
A value of R < 1.2 D is permitted for ends in which the ratio H/D falls between 0.18-
0.2.
In accordance with Figs. 4/16, 4/17, 4/18, 4/19, 4/20, 4/21 –
D = outside diameter of the head;
H = height of the head measured on its outside surface from the junction of the
dished part with the cylindrical shell;
R = inside radius of the spherical part of partial spherical heads;
r = inside knuckle radius of partial spherical heads.
Fig. 4/19: Opening in Heads Fig. 4/20: Reinforced opening782 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
DEPTH RATIO H/D
Note 1: The curve drawn with continuous line in the series is for determining value of K for plain
unpierced heads. Other curves with dotted lines are for heads with opening on it.
Note 2: If the H/D ratio is less than 0.25 (torispherical heads), additional consideration shall be given
to the ratio of T/D in determining the value of K
Fig. 4/21: Graph of Shape Factor K for Dished Heads[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 783
175. General.─ (1) The thickness ‗T‘ specified in equation (4/10) of regulation 177 is the
thickness of the end plate after manufacture and is applicable over the whole area of the end
plate up to the point where, for ends of partially spherical shape, the dishing radius joins the
corner radius; from this joint a gradual thinning is permissible up to maximum of 10 per cent
of the thickness ‗T‘ at the point where the corner radius joins the straight portion of flanged
end plate.
(2) A similar gradual thinning is permissible for end plates of semi-ellipsoidal shape.
(3) This permissible reduction in thickness applies also to the flange for the manhole
opening. In no case, however, when the end plate is butt welded to the drum shell, shall the
thickness of the edge of the flange for connection to the shell be less than the thickness of
an unpierced seamless shell of the same diameter and material, determined by equation
(4/2).
176. Dished end with opening.─ (1) (a) Holes cut in the heads (manholes or tube holes)
shall be round or elliptical.
(b) Small size openings complying with conditions of sub-regulation (3) do not require any
additional thickness of head or reinforcement of opening.
(c) Large size openings require an increase in thickness of the head, according to sub-
regulation (2)or a reinforcement of the opening according to sub-regulation(4) .
(2) (a)The shape factor ‗K‘ to be used in calculating the thickness of heads varies
depending on the height of the head ‗H‘ and on the dimension of the largest opening.
The value of K is indicated in Fig. 4/21, by means of curves, each of which corresponds
to a value of the ratio--
d
-------
DT
Where,
d = diameter or the largest opening in the head (in the case of an elliptical opening,
the larger diameter of the ellipse);
D = outside diameter of the head; and
T= minimum thickness after dishing.
(b) In addition, the following conditions shall be satisfied;
T
< 0.1 and
D
d
< 0.5
D784 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(c) The same condition and the same curves apply for openings simply cut in the
plate of the head as well as to those which are flanged inwards. In the latter case,
the radius ‗r‘ of the flanging (see Fig. 4/18) should not be smaller than 25 mm. The
thickness of the flanged portion may be smaller than the calculated thickness ‗T‘.
(d) Unreinforced openings and flanged-in openings in dished heads shall be
arranged so that the distance from the edge of the head is not less than as shown
in Fig. 4/19.
(e) In all case the width of the band separating two adjacent openings should, in
projection, be at least equal to the diameter of the smallest opening as shown in
Fig. 4/19.
(3) (a)Small openings which do not require any reinforcement; Fig. 4/21 indicates
that, for a given ratio of H/D, the shape factor K of a plain head corresponds to a
certain value of the ratio,
d
-------
DT
(b) Piercing of holes with a diameter smaller than or equal to that which corresponds
to this value can thus be made without any reinforcement in a head, the
thickness of which is equal to the minimum required for a plain head.
(c) The position of those openings shall however comply with the conditions stated in
sub-regulation (2).
(4) (a)Reinforcement of large openings; Large holes may be cut without increasing
the thickness of the head provided they are sufficiently reinforced.
(b) The reinforcement may consist either of a welded nozzle or one or two
reinforcing welded plates, or of a combination of these two procedures.
(c) To determine the strength of the construction, one shall proceed as follows
(see Fig. 4/20) Let the imaginary diameter d‘ of the opening be given by the formula.
A
d‘ = d - ----
T
Where,
d = actual diameter of the opening in the head (outside diameter of the nozzle);
T = minimum thickness of the head; and
A = effective cross-section of reinforcement.
(d) This effective area ‗A‘ corresponds, within the Limits given below, with the
actual cross-section of the reinforcing plates and with the cross-section of the
nozzle decreased by the cross-section necessary to support the pressure, for those
parts of the nozzle situated outside the internal surface of the head.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 785
(e) The shape factor K can then be read from Fig. 4/21, corresponding to the ratio d‘
/ √DT
(f) The maximum limits for the area of reinforcement that shall be taken into
account are
(a) L = 2RT for the width of a reinforcing plate;
1
(b) L = dT for the length of a nozzle
2 t
Where,
R= internal radius of the spherical part of the head (or for elliptical heads
the internal radius of curvature of the meridian at the centre of the
opening).
T = actual thickness of the nozzle,
t
L and L =dimensions given in Fig. 4/20.
1 2
(g) The position of the outer edges of the reinforcement shall comply with the
provisions of sub-regulation (2) and Fig. 4/19.
(h) In cases where the allowable stress of a part of the reinforcement is lower than
that of the head, the corresponding area A should be multiplied by the ratio:
allowable stress of the reinforcement material
-------------------------------------------------------------
allowable stress of the head material
177. End plate subject to pressure on the concave side.─(1)Dished ends subjected to
pressure on the concave side shall be determined by the following formula;
2f (T – 0.75)
P = ----------------- Equation (4/10)
DK
Where,
T = Actual thickness of dished end in mm;
P = Maximum Allowable Working Pressure in kg/cm2 (g);
D = Outside diameter of dished end in mm;
f = is the maximum permissible stress values as available in the governing codes
of the country of the material to which it belongs in kg/cm2;
K = Shape factor as defined in sub-regulation (2) of regulation 176 and Fig. 4/21;
0.75 = additive thickness in mm.
(2) The minimum head thickness shall, however be notless than 5 mm.
(3 ) The minimum required thickness of dished end shall be determined by the
following formula:786 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Equation (4/11)
Where,
P = Maximum Allowable working pressure in kg/cm2 (g),
t = Calculated minimum thickness of dished end in mm;
D = Outside diameter of dished end in mm;
f = is the maximum permissible stress values as available in the governing codes
of the country of the material to which it belongs in kg/cm2;
K = Shape factor as defined in sub-regulation (2) of regulation 176 and Fig. 4/21;
and
0.75 = additive thickness in mm
178. Internal doors.─Requirements of regulation 137 shall apply.
PART-VI
179. Stand Pipes, nozzles and openings.─ (1) Where openings in drums, shells, pipes are
drilled in a definite pattern, the efficiency of the ligaments shall be determined by the
methods given in regulation171 provided the largest hole in the group doesn‘t exceed the
following:-.
The maximum diameter of any unreinforced opening shall not exceed ‗d‘ as
calculated from the following equation (subject to a maximum of 203mm).
d = 8.08 {(1-K) Dt} 1/3
K = PD / 1.82 f t
where ,
D = nominal OD of the Drum, Shell, Header, Pipe or Dished end
containing opening (mm)
t = actual thickness (mm)
P = Maximum Allowable Working Pressure (kg/cm2 (g))
f = maximum permissible stress as available in the governing codes of the
country to which material belongs (kg/cm2(g)).
When K has a value of unity or greater, maximum diameter of unreinforced
opening should be taken as 51mm. Larger openings shall be compensated in
accordance withsub-regulation (2) ofregulation 179.
(2) (a) Where standpipes or nozzles are secured by welding, adequate compensation for
the hole cut shall be provided. Compensation shall be considered adequate when the
sectional area ‗X‘ to be compensated measured through the axis of the shell is less
than the compensating area ‗Y‘ given in Fig. 4/22 and Fig. 4/23.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 787
(b) In case where ‗Y‘ is less than ‗X‘,a compensating plate shall be fitted to the shell at
the standpipe and secured by fillet welds as in Fig. 4/22 and Fig. 4/23.
Fig. 4/22: Compensation of Set through branch openings788 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 4/23: Compensation of Set on branch openings
Area to be compensated (
Note: If compensation pad is provided, the thickness of compensation pad to be
added with shell minimum thickness.
Area available for compensation from shell = 2 x (ts-es)x Ci
Area available for compensation from nozzle projecting outside shell surface
fn
= 2 x (tn-en)x Bo x
fs
Area available for compensation from nozzle projecting inside shell surface
fn
= 2 x tn x Bi x
fs
fn
Area available from weld = Aggregate cross sectional area of weld x
fs
Area available for compensation (Y) = sum of all the above areas.
Where,
ts = actual thickness of the shell
es = thickness of unpierced shell designed to withstand the required pressure and
temperature
dn = nozzle maximum inside diameter for set on type nozzles or hole diameter for set
through type nozzles
tn = actual thickness of nozzle
en = thickness of nozzle required to withstand the required pressure, temperature
and external loads on the nozzle.
fs = allowable stress for shell material at the working metal temperature
fn = allowable stress for nozzle material at the working metal temperature
Ci = greater of (ts + 76, dn/2)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 789
Bo & Bi = least of (2.5 times the actual thickness of shell, 2.5 times the actual
thickness of nozzle).
Note: In any case if the length of nozzle is less than the condition specified above,
then ‗Bi‘ & ‗Bo‘ should be limited to actual length of the nozzle.
w = width of weld
h = height of weld
No credit should be taken for additional strength of material having higher stress
value than that of shell used for nozzle or reinforcing pad.
The area of cross-section of the compensation plate shall be governed by the ratio
between the permissible stress at the working metal temperature for the materials of
the shell and the compensating plate.
(3) Where the standpipe or nozzles are welded to dished end plates, the
compensation shall be considered adequate if calculated on the same basis as in
sub-regulation(1) & (2) above. But the cross-sectional area of the end plate to be
compensated shall be calculated on the basis of Equation (4/10) and the height
of standpipe above the outer surface on within the inner surface of the end plate
shall be measured along the radial line passing through the centre of the
opening.
(4) The minimum thickness of the flanges and the body of standpipes shall be in
accordance with regulation 127. Flanges conforming to International codes and
standards such as ASME, BS, EN, DIN can also be used if it is meeting required
pressure and temperature ratings.
180. Attachment of stand blocks and branch pipes by welding.─ (1)Typical methods of
attachment are shown in figures, namely:-
Fig. 4/24, 4/25, 4/26, 4/27, 4/28, 4/29, 4/30, 4/31, 4/32, 4/33, 4/34, 4/35 and 4/36.
All weld dimensions shown shall be regarded as minimum dimensions those defining
the grooves refer to the actual preparation for welding.
t = Specified thickness of standpipe or branch pipe.
n
t = Specified thickness of drum or header shell at standpipe or branch connection.
s
t = Actual thickness of compensating ring.
e
The application of certain of the constructions illustrated may be limited by
consideration of design pressure and temperature or size (in combination) and
although certain dimensions are given, each case must be considered on its merits.
Other methods may be adopted subject to agreement between the Inspecting
Authority and manufacturer.790 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) Welding consumables shall comply with the requirements of regulation 71 to 76.
(3) Not less than two runs of metal shall be deposited at each weld. Each run of weld
metal shall be thoroughly cleaned and freed from slag before the next run is
deposited. In the case of water tube boiler or boilers fitted with super heater, the feed
water connection and stop valve need not be shut off and if the total valve area is
lifted and found to be adequate by calculations, the requirement of the accumulation
test may be assumed to have been satisfied if the valves area has been found so
adjusted that at least one safety valve on each boiler shall lift at or below the design
pressure of the boiler and all valves shall lift so that are steam which can be
generated by the boiler can be discharged with a pressure rise not exceeding 10 per
cent of the design pressure.
(4) The final finish of the weld shall be such that change of section from drum to standpipe,
or from flange to standpipe is gradual and free from sharp notches. After completion of
welding (except in the case of seal welds) the drum shall be stress-relieved by heat
treatment.
Fig. 4/24: Welded in StandPipe or Branch for
StandPipes and Branches up to and Fig. 4/25: Welded to StandPipe or Branch
including 101.6 mm Bore or Branches up to any and including
101.6 mm Bore[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 791
Fig. 4/26: Welded in StandPipe or Branch with Fig. 4/27: Welded in StandPipe or Branch
Compensating Ring for StandPipes or with Compensating Ring For StandPipes
Branches including 101.6 mm Bore and Branches up to and including 101.6
mm Bore
All dimensions are in mm.
Fig. 4/29: Screwed and Seal Welded
Connection792 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 4/31: Welded in StandPipe or Branch
Fig. 4/30: Welded in StandPipe or Branch with
Compensating Ring
Fig. 4/32: Welded in StandPipe or Branch
All dimensions are in mm.
Fig. 4/34
Fig. 4/33: Branch Welded on Header with
Internal Machinery[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 793
Fig. 4/35: Unreinforced Branches Inaccessible
for Welding Inside Shell Fig. 4/36: Unreinforced Branches
Inaccessible for Welding Inside Shell
Notes:
The branch must be loose fit in the hole but the gap
at any point, should not exceed 3 mm or en/2
whichever is less.
Welded sizes B + F = 1.5en.
1 1
F should not exceed 16 mm not be less than en/2.
1
Weld size B + F = 1.5en minimum or 1.5es minimum,
whichever is less.
F should not exceed 16 mm nor be less than en/2.
en = Thickness of nozzle.
es = Thickness of shell.
All dimensions are in mm.
.794 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER-5
VALVES, GAUGES AND AUXILIARIES
PART-I
181. Requisite Mountings, fittings and Auxiliaries. ─(1)Every boiler shall be provided at
least with the following, namely: -
(a) Two safety valves, one of which may be a high steam and low water type safety
valve and in no case the bore of the seat of the valve should be less than 19 mm.
(b) Two means of indicating the water level;
(c) A steam pressure gauge;
(d) A steam stop valve;
(e) A feed check valve;
(f) One feed apparatus;
Provided that for boilers fired by gaseous, liquid or solid fuels in suspension
where heating surface exceeds 20 m2,shall be provided with minimum two feed
apparatus which shall have a combined capacity of not less than the maximum
continuous rating of the boiler: Provided further that for other boilers where residual
heat is there even after fuel supply cut-off, two feed apparatus each having a
capacity of not less than maximum continuous rating of the boiler shall be provided.
(For boilers in battery see regulation 242);
(g) A blow-down cock or valve;
(h) Fusible plugs as provided under Regulation 236;
(i) An attachment for Competent Person‘s test gauge;
(j) A manhole, where size and construction permit, and such mud holes or sight
holes as are necessary for effectively cleaning the boiler.
(2) In the case of boilers fitted with integral super heaters, an additional safety valve
shall be fitted at the end of the super heaters outlet header.
(3) In the case of boilers with no fixed steam and waterline, the fitting of such
accessories that are manifestly not needed or used, such as water gauges, water
columns and gauge cocks, may not be insisted upon.
(4) In the case of a single boiler of the Shell type and not connected in a battery with
other boilers, the heating surface of which does not exceed 102 m2, two independent
source of power supply to the two feed apparatus shall not be necessary.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 795
(5) In the case of miniature boilers coming under Chapter-14, the Steam pressure gauge
may be connected to the steam space or to a steam connection to the water column
by a syphon tube or equivalent device that will keep the gauge tube filled with water
and if brass or bronze composition is used, the minimum size of the syphon tube
shall be 6 mm standard pipe size; for other materials the minimum inside diameter of
the pipe or tube shall be 13 mm.
(6) For Electrode boilers, see regulation 356.
(7) In case of boilers with reheaters, the reheaters shall be protected with one or more
relieving devices of 105% capacity (15% of the total capacity shall be located in the
steam flow path between reheater outlet and first stop valve) to avoid over pressure
in case of internal failures.
182. Additional Requirements for Automatic Boilers.─(1)Every boiler which is provided
with the appropriate water level and /or firing control, to allow for automatic working, shall
comply with the following requirements:
(a) In the event of failure of automatic control, boiler shall be capable of being
brought under immediate manual control.
(b) In those cases where the control and alarm devices are housed in chambers
external to the boiler, the following shall apply, namely:-
(i) The boiler shall have provision made for isolating the steam and water
connections of the chambers from the boilers. Such isolating valves shall be
capable of being locked in the open position and shall preferably be of the
parallel slide type but if screw down stop valves are fitted, those on the water
connection shall be mounted with the spindle horizontal to avoid the possibility of
an air lock. The steam and water connections of the chambers shall be not less
than 25 mm bore. In those cases where sequencing control water valves are
fitted, the steam isolating valve may be omitted;
(ii) The boiler shall be provided means to test operation of the control or alarm and
to blow through separately the water connection and the chamber to prevent the
accumulation of deposits. The means provided for flowing through shall be
sequencing valves or equivalent devices so arranged that the water connection
to the boiler cannot be shut off unless the drain connections to the chamber is
open;
(iii) The boiler shall have a drain system from the chambers which provides a visual
indication of flow. Tundishes of adequate size, placed in a prominent position
shall be used wherever practicable.
(c) Where the boiler is provided with electrical equipment for water level and firing
control, it shall have this equipment so designed that any fault in the circuits caused,796 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
both in the fuel and air supply, the boiler to be automatically shut off. Positive means
requiring manual resetting shall be provided to cut off the fuel and air supplies to the
boilers should there be a failure of electricity supply to water level and / or firing
control equipment. All electrical conductors and equipment in connection with water
level and firing controls shall be of adequate size and shall be properly insulated and
protected against danger including adequate protection against the ingress of
moisture and the effects of high temperature.
(d) Where the evaporating capacity of the boiler is greater than 3700 Kg/h, it shall have
automatic water level alarms and firing controls and can be tested regularly without
altering the level of water in the boiler. The water level alarms may be incorporated in
the automatic control system. With a perceptible water level which are arranged for
automatic working and not intended for continuous supervision, shall be provided
with an entirely independent and separately operated over-riding control in addition to
the water level and firing control specified in sub-regulations (2) and (3). The over-
riding control shall comply with the following requirements:
(i) Cut off fuel supply to the burners or the fuel and air supply to solid fuel stoker
and operate an audible alarm when the water level in the boiler falls to a pre-
determined low water level;
(ii) Be of the lock-out type and so arranged that control or its electrical circuit has to
be manually reset before the boiler can be brought back into operation;
(iii) Be provided with its own entirely independent electrical control circuit.
(e) Where mounted externally to the boiler, the over-riding control shall -
(i) be provided with its own chamber;
(ii) Comply with the requirements of clause (b).
(2) Automatic water level control shall be as follows:-
(a) float or displacer operated; or
(b) operated by electrical probe or thermostat; or
(c) operated by other approved principle to the satisfaction of the Inspecting Authority.
The control equipment shall regulate the feed-water supply to the boiler in order
to effectively maintain the level of water in the boiler between predetermined limits.
(3) Automatic firing controls shall comply with the following requirements-
(a) At all times they shall effectively control the supply of fuel and air to the
combustion equipments.
(b) They shall shut off the fuel supply to the burners or the fuel and air supply to the
stoker under the following conditions:-[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 797
(i) Flame failure or pilot flame failure in the cases of gas, oil or pulverised
fuel fired boilers. This control shall be of the lockout type required to be
manually reset;
(ii) Failure to ignite the fuel at the burner within a pre-determined time. The
control shall be of the lock-out type required to be manually reset;
(iii) When the water level in a boiler falls below a pre-determined safe level.
The control shall also cause an audible alarm.
(iv) Failure of forced or induced draught fans or any automatic flue damper.
(v) Increase in furnace pressure to a pre-determined value.
Note: The above provisions shallnot apply to once-through forced circulation boiler.
PART-II
183. Materials, Temperature and Pressure Limits.─(1)The materials used in the
manufacture of the bodies of the fittings shall comply with the following requirements,
namely: -
(i) Castings of Carbon, Alloy and Stainless Steel shall comply with regulations
50to 57.
(ii) Steel forgings shall comply with regulations 58 to 62.
(iii) Iron casting shall comply with the regulations 63 to 70.
(iv) Bronze castings shall comply with the following table 5/1:
Table 5/1
Serial Chemical Composition Grade A Grade B
No.
(1) (2) (3) (4)
1. Tin 5.5 to 8.0% 4 to 6%
2. Lead 1.0 to 3.0% 4 to 6%
3. Zinc 3.0 to 6.0% 4 to 6%
4. Total of all elements other than those set 0.50% 0.50%
out above and excluding Copper and
incidental Nickel
5. Copper plus incidental Nickel Balance Balance
6. Physical Properties 22 kg/mm2 20.5 kg/mm2
Ultimate tensile Strength
7. Sand Cost Elongation per cent minimum
(cast on)on standard test piece C 8% 15%
8. Ultimate tensileStrength 23 kg/mm2 20.5 kg/mm2
9. Sand cost Elongation percent minimum
(separately cast) on standard test piece C 12% 15%798 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(v) The seats and discs of valves shall be made of non-corrodible metal.
By non-corrodible metal is meant specially resistant to corrosion and /or
erosion.
(2) Cast Iron shall not be used for:-
(i) Temperatures above 220°C.
(ii) Pressure exceeding 13 bar gauge.
(iii) Valves exceeding 200 mm nominal bore which are connected directly to the
boiler.
(iv) Wedge or double disc gate valves which are connected directly to the boiler.
(v) Boiler blow down fittings.
Explanation- The expression connected directly to the boilers covers the valve
which cannot itself be isolated from the boiler.
Note: Spheroidal iron may be used for temperature not exceeding 282°C and
pressure not exceeding 17.58 kg/cm2(g) provided it complies with the following
requirements in respect of the physical properties.
(a) 0.2% proof stress 250 kg/mm2;
(b) Minimum elongation percent 12.
(3) Copper alloy shall not be used for temperatures above 225°C, where the
valves are connected directly to the boiler. In the case of valves not
connected directly to the boiler this temperature limitation may be increased
to 260°C.
PART-III
184. Castings.─(1)All castings shall be smooth, sound and free from flaws or other injurious
defects. Variations in thickness at any part shall be gradual and substantial fillets shall be
provided.
(2) The body of a boiler mounting shall be connected to the boiler flange by a strong and
stiff neck. In no case, the thickness of the neck of bronze mounting shallbe less than 5
mm for sizes up to and including 19 mm bore or 6 mm size over 19 mm bore.
185. Packing of Cocks.─(1)The bodies of all cocks except those for pressure gauges shall
be packed with any non-asbestos heat resisting material and shall be of substantial
designand those over 25 mm bore shall have special provision, other than the gland for
securing the plug.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 799
(2) Water gauge column cocks may be any non-asbestos heat resisting material packed or
solid plug type.
186. Covers and Spindles.─(1)Valves of 38 mm bore and above directly connected to
boilers, and other valves of 63 mm bore and over where fitted with a cover shall have such
cover secured by bolts or studs and the screwed portion of the spindle shall be outside the
stuffing box. All valves for superheated steam shall be fitted with an external screwed
spindle.
(2) (a) Where the covers of valves are secured by studs shall be screwed into the body with
full thread for a length of at least one diameter.
(b) The stud holes shall not penetrate into the pressure space of any casting.
(3) Valves with screwed covers shall be fitted with suitable locking device to prevent
rotation of the cover.
187. Direction of Operation.─Valves shall be clearly marked to indicate the direction of
flow. Valves directly connected to boilers shall be fitted with indicators to clearly show
whether the valve is closed or open and all valves shall open by anti-clockwise rotation.
188. Moving Parts.─The valves and spindles shall be efficiently guided and means shall be
provided in every case to prevent them leaving their guides. The working parts shall have
sufficient clearance to ensure freedom of movement under all conditions of service.
189. Flanges.─(1) Flanges shall be in accordance with the tables for the appropriate
pressure (Appendix-F).
(2) In the case of safety valves the drilling, thickness and bolting of inlet flanges shall be in
accordance with tables for the appropriate pressure and material and for the diameter of
flange adopted. In the case of outlet flanges the pressure taken shall be the pressure on
the outlet side of the valve.
(3) For the purpose of determining particulars of flanges for blow down and scum pipe
fittings, the design pressure of the fittings shall be assumed to be design pressure of the
boiler.
(4) All flanges shall be machined on the face, spot faced, or machined at the back, and the
bolt holes shall be drilled.
190. Valve Seatings.─Where separate seats are fitted, they shall be efficiently
securedandmeans shall be provided in every case to prevent the valves leaving their guides.
191. Chests and fittings in General.─(1) (a) All chests and fittings shall be smooth, sound
and free from flaws, cracks or other injurious defects and after completion, the chests shall
be hydraulically tested at minimum one and half times the maximum allowable working
pressure of the valve for which they are intended.800 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) Hydraulic test shall be made with water which may contain a corrosion inhibiter, with
kerosene or with other suitable liquid provided its viscosity is not greater than that of water at
a test temperature not above 52°C.
(2) (a) (i) Valves may be fabricated from seamless steel pipes for pressures not exceeding
17.6 kg/cm2(g) and temperatures not exceeding 426°C.The welding shallconform to
regulation 97 and valve chest shall be stress relieved after fabrication.
(ii) Valves meant for use in pipe work may also be fabricated by welding from seamless
steel pipes but no restriction as above regarding pressure and temperature shall apply to
them provided the welding complies with all the relevant requirements of fusion welding
such as stress relieving and radio-graphic inspection of the weld as prescribed in
Chapter-4 of these regulations.
(b) The maximum allowable working pressure of the chests shall be determined by
equation (7/3), where the term ‗2 fE‘ shall be substituted by the term ‗1.8 x f‘.
(3) The maximum allowable working pressure and the thickness of the bronze and cast Iron
valve chests shall be determined by the following formulae, subject to the minimum
thickness as specified in sub-regulation ( 2) ofregulation 184.
R x (T – C)
P = -------------- Equation (5/1)
4.5 x D
4.5 x P x D
T = ------------------- + C Equation(5/2)
R
Where,
P is maximum allowable working pressure
R is the minimum specified tensile strength of the grade of the material,
D is the external diameter of the chest,
T is the minimum thickness of the chest, excluding tolerance, and
C is the minimum positive tolerance as specified hereunder:
For Bronze Chests C = 1.5 mm
For Cast Iron Chests C = 5 mm
(4) The maximum allowable working pressure and the thickness of the steel
valve chests of circular cross-section shall be determined by the following
formulae, namely: -
2f (T – C)
P = --------------- Equation (5/3)
D – T + C
P x D
T = ------------- + C Equation(5/4 )
2f + P[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 801
Where,
P is maximum allowable working pressure in kg/cm2(g)
f = maximum allowable stress as available in the governing codes of the country of
the material to which it belongs in kg/mm2. In case of non-availability of the
value, the following procedure for evaluating the allowable stress values shall
be adopted.
For temperature at or below 454°C is the lower of the following two values:
E R
t
f = f =
1.5 2.7
For temperature above 454°C the least of the following three values-
E S
t r
(a ) f = --- (b) f = ----- (c) f = S
c
1.5 1.5
Where,
E = Minimum value of yield point (0.2 per cent proof stress) at temperature ‗t‘,
t
R = Minimum specified tensile strength for the grade of steel concerned at room
temperature,
S = the average stress for the grade of steel concerned to produce rupture in
r
100,000 hours.
If the width of the scatter band of results obtained when determining this value
exceeds + 20 per cent of the average value, then S shall be taken as 1.25
r
times the minimum stress at temperature ‗t‘ to produce rupture in 100,000
hours.
S = The average stress to produce an elongation (creep) for the grade of steel
c
concerned of 1 percent in 100,000 hours at temperature ‗t‘. For metal
temperature ‗t‘ below 250°C values ‗f‘ for 250°C shall be used.
Note:In case Sc values are not available in Material Standard and such
materials are known to have been used in boiler in India or abroad, then for
such materials, the allowable stress may be taken as the lower of
Et S
r
or
1.5 1.5
Note:The allowable stress for cast steel shall be 80 per cent of that determined
on the above basis.
D = the external diameter of the chest,802 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
T = the minimum positive tolerance as specified hereunder:
For cast steel chest C = 5 mm
For forged or stainless chest C = 2.5 mm
Note: Over and above the calculated thickness, additional thickness needed for
assembly stresses, Valve closing stresses, shapes other than circular and
stress concentrations, shall be provided by the manufacturers to the satisfaction
of the Inspecting Authority.
(5) (a) The number of valves and fittings which shall be made available to the Competent
Person (excluding mechanical tests) shall be, following, namely:-
Table 5/1A
Serial Size of valves and fittings Number
No.
(1) (2) (3)
1. Up to and including 51 mm 10 per cent
2. Over 51 mm and up to and including 76 mm 15% of the number of
chests
3. Over 76 mm and up to and including 114 mm 20% of the number of
chests
4. Over 114 mm 100 per cent.
(b) If the Inspecting Authority is satisfied that the manufacturer has adequate facilities
for testing and Inspection of valves intended for service pressure exceeding 10.5
kg/cm2(g) or temperature exceeding 204°C and actually tests each fitting at his
works, the Inspecting Authority may, at his discretion, undertake test on a sample
basis.
(6) The maximum allowable working pressure and the minimum thickness of the steel
valve chest of spherical cross section shall be determined by the following formula,
namely,
4f (T – C)
P = ---------------- Equation (5/5)
D – 0.8 (T – C)
P x D
T = ------------------ + C Equation (5/6)
4f + 0.8 P
Where,
P = maximum allowable working pressure,
T = the minimum thickness of the chest,
D = the external diameter of the chest,
f = allowable stress for the material to be determined on the basis given in
clause (d) above.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 803
C = the minimum positive tolerance as specified hereunder:
For Cast Steel Chest C = 5 mm.
For forged or stainless steel chest C = 2.5 mm.
PART-IV
192. Special requirements for safety valves.─Safety valves, ordinary, high lift, and full lift,
shall be so constructed that breakage of any part shall not obstruct the free and full
discharge of steam from the boiler.
193.ordinary Lift Safety Valve.─ (1) A safety valve in which the valve head lifts
automatically a distance of at least D/24 with an over-pressure not exceeding 10% of the set
pressure.
(2) There shall not be any mechanical stop which would prevent the valve head from being
lifted a distance of at least D/8. D is the minimum bore of the body of seat.
194.High Lift Safety Valve.─ (1) A safety valve in which the valve head lifts automatically a
distance of at least D/12 with an over-pressure not exceeding 10% of the set pressure.
(2) There shall not be any mechanical stop which would prevent the valve head from being
lifted a distance of at least D/8. D is the minimum bore of the body seat.
195. Full Lift Safety Valve.─ (1) A safety valve in which the valve head lifts automatically a
distance such that the area of discharge which limits the flow through the valve is between
100% and 80% of the minimum area at any section at or below the body seat.
(2) This lift is achieved by a rapid opening within an over pressure not exceeding 5% of the
set pressure.
196.Discharge Capacity of Safety Valves.─(1)The rated discharge capacity of a safety
valve which discharges saturated steam shall be calculated using the following equation;
E = CAP Equation (5/7)
Where,
E = is the rated discharge capacity of saturated steam (kg/h.)
P = is the highest pressure of any safety valve mounted on the boiler (bar
absolute),
A = is the area (mm2).
For the ordinary lift and high lift safety valve, ―A‖ is the area of the minimum bore of
the body seat. For full lift safety valve, ―A‖ is the area of discharge described
regulation 195 and its value can only be obtained from the safety valve
manufacturers. ―C‖ is a constant taken from the following table, appropriate to the
type of the valve or as established by tests carried out in accordance with Appendix–
G804 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Table 5/2
Serial No. Type of valve Value of the
constant ‘C’
(1) (2) (3)
1. Ordinary lift 0.05
2. High lift 0.10
3. Full lift 0.24
(3) The rated discharge capacity of a safety valve which discharges superheated
steam shall be calculated using the following equation :-
E
E = --------------- Equation (5/8)
s
1 + 2.7 T
s
-------
1000
Where,
E = is the rated discharge capacity of superheated steam (kg/h),
s
E = is the rated discharge capacity of saturated steam calculated using equation
(5/7) (kg/h),
T = is the degree of superheat (°C)
s
Equation (5/8) may be used to determine the rated discharge capacity of safety
valves at super-critical steam pressure. In these cases the saturation
temperature of the steam shall be taken as 375°C.
(3) (a) The Total peak load evaporation of a boiler shall be calculated on the basis of
evaporation not less than 30 kg/hr/m2 of heating surface (exclusive of super heater and
non-steaming economiser).
(b) In the case of Waste Heat Boilers, however, when the evaporation per square
meter of the heating surface is certified by the manufacturers to be less than 30 kg.
The minimum number of safety valves required may be calculated on the basis of the
actual maximum evaporation of the boiler.
197. Over Pressure of Safety Valves.─ (1) The safety valves shall be sodesigned that they
attain rated discharge capacity with the over pressure not greater than that given in
regulation 193 to 195; provided that the safety valves which have a discharge area less than
80 per cent of the flow area, the over pressure at which the design lift is attained shall not
exceed 10 percent of the set pressure.
(2) For safety valves having discharge area 80 per cent of more of the flow area, the over
pressure at which the design lift is attained shall not exceed 5 per cent of set pressure.
198. Pressure Drop (Blow Down).─ (1) The safety valves shall bereset at a pressure at
least 2.5% below, but not more than 5% below the safety valves set pressure.
(2) The 5% limit shall be increased to 6% for set pressures up to 25 kg/cm2 and 10% for
valves having a body seat bore less than 32 mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 805
199. Mountings of Safety Valves.─(1)(a)Safety valves shall be mounted without any
intervening valve on pads or branches used for no other purpose. The axis of the valve shall
be vertical.
(b) The cross – sectional area of the bore of each pad or branch shall be at least equal to the
area of the bore at the inlet of the safety valve, or where two or more safety valves are
mounted on the same pad or branch, at least equal to the sum of the areas of the inlet bores
of all the safety valves.
(2) (a) Branches shall be as short as possible so as not to impair proper action of the safety
valves or impose any undue stress on the branches at their point of attachment to the boiler.
(b) Nothing shall obstruct free flow to the safety valve. Branches, particularly when full lift
safety valves are mounted on them, should be radiused at the inlet.
(c) The inlet and outlet flanges shall be drilled in accordance with the approximate table in
Appendix-F for the diameters of flanges adopted.
200. Openings in Shell.─(1) No accessories other than those integral with the Safety Valve
shall obstruct the openings in the boiler shell.
(2) Discharging steam shall have direct access to the safety valve without flowing through
internal pipes.
201. Discharge Passage.─(1) (a) The safety valve discharge pipes shall comply with the
requirements of sub-regulations (2) , (3) and (4) of this regulation.
(b) The discharge pipe shall be as short and straight as possible and be fitted with open
drain to prevent accumulation of water in the pipe. Suitable arrangement shall be provided in
the discharge pipe system so that the discharge can readily be heard by the Boiler
Attendant.
(2) Where a waste steam–pipe is fitted the pipe and the passage leading to it shall have a
cross-sectional area not less than the minimum combined area of the safety valves
required by regulation 196.
(3) For full lift valves, the area of waste steam pipe and passage leading to it shall have a
cross-sectional area not less than twice ―A‖, or such area above this minimum as maybe
required for valves having a higher approved constant, where ―A‖, ―E‖ and ―P‖ are as
defined in regulation 196.
(4) (a) The area of the discharge pipe from an economiser safety relief valve shall be at least
twice the area of the valve seating.
(b) Where the discharge from several economiser safety relief valves is connected to the
main discharge pipe, the diameter of the main discharge pipe shall be designed to
prevent accumulation of pressure due to the formation of steam under the particular
conditions of temperature and pressure which may be applicable.
202. Drainage.─(1) For each enclosed safety valve chest, a means of draining shall be
provided.
(2) The drain pipe shall be laid with a continuous downward gradient clear of the boiler to a
place where the discharge is visible and cannot do injury to any person.806 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
203. Moving Parts.─(1) The valves and spindles shall be efficiently guided and means shall
be provided in every case to prevent their lifting out of their guides.
(2) The working parts shall have sufficient clearance to ensure freedom of movement under
all conditions of service. The spindle shall not be fitted with a stuffing box.
204. Bearings for Levers.─(1) The bearings of the levers of lever valve shall be so
designed as to allow free working of the valve under all condition of service.
(2) Where the lever is mounted on pin bearings, the holes in the lever shall be bushed with
non-corrodible metal, or the pins shall be of non-corrodible metal.
205. Attachments of Weights and Springs.─(1) In a lever and weight safety valve, the
weight shall be in one piece and attached to the lever in such a way that the safety valve
cannot be over loaded.
(2) (a) In the case of spring loaded safety valves, washers or ferrules shall be fitted under the
adjusting screws so that the valves cannot be over loaded when under the steam.
Interference with load on the spring after the safety valve has been adjusted shall be
prevented by the fitting of a ferrule under the adjusting screw collar, or by using a lock nut
on the adjusting screw which shall be further safe-guarded by means of a padlock or
other suitable device.
(b) Where springs are in tension, links or the suitable stops shall be fitted to prevent the
spring being extended a greater amount than that corresponding to a valve lift of D/4.
Where, D = diameter of valve seating.
206. Easing Gear.─Safety valves shall be so arranged that they can be eased off seats
when under pressure and the easing lever shall positively lift the valve.
207.Lift.─ Safety valves shall be capable of being lifted a distance such that the area of
the discharge edge shall not be less than the minimum aggregate area ―A‖ in regulation 196.
208. High and Low Water Alarms.─High and low water alarms shall be adjusted so that
the alarm is sounded with the water level visible in the gauges.
209. Final Settings.─Before leaving the maker‘s works, each safety valve shall be adjusted
to blow-off at the specified pressure.
210. Adjustment of Safety Valve Set Pressure.─The set pressure of a safety valve may
be adjusted using air or other gas as the test medium provided that the safety valve has
been subjected previously to hydraulic test in accordance with the requirement of sub-
regulation(1) of regulation 191.
211.Change of Safety Valve Set Pressure.─The spring in a safety valve shall not be reset
for any pressure more than 5% above or below that for which the valve is markedandthe set
pressure may be changed to the satisfaction of registering authority.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 807
212. Materials.─(1)(a)The springs shall be manufactured from steel made by the Acid Open
Hearth or Electric Process and the Chemical composition shall be within the following limits:
Table 5/3: Carbon Steel
Serial No. Element Minimum ( Percent) Maximum( Percent)
(1) (2) (3) (4)
1. Carbon 0.90 1.20
2. Silicon 0.30
3. Manganese 0.45 0.80
4. Sulphur 0.050
5. Phosphorus 0.050
Table 5/4: SILICON MANGANESE STEEL
Serial No. Element Minimum ( Percent) Maximum( Percent)
(1) (2) (3) (4)
1. Carbon 0.5 0.65
2. Silicon 1.50 2.00
3. Manganese 0.70 1.00
4. Sulphur 0.050
5. Phosphorus 0.050
Table 5/5: ALLOY STEEL
Serial No. Element Grade I Grade II Grade III Grade VI
(1) (2) (3) (4) (5) (6)
1. Carbon % 0.55 to 0.65 0.46 to 0.54 0.55 to 0.65 0.55 to 0.65
2. Manganese % 0.70 to 1.00 0.70 to 0.90 0.70 to 1.00 0.70 to 1.00
3. Silicon % 0.10 to 0.35 0.10 to 0.35 0.10 to 0.35 1.70 to 2.10
4. Chromium % 0.60 to 0.90 0.80 to 1.10 0.40 to 0.60 0.20 to 0.40
5. Molybdenum % -- -- 0.15 to 0.25 0.20 to 0.30
6. Vanadium % -- 0.15 min. -- --
7. Nickel % -- -- 0.40 to 0.70 --
8. Phosphorous % -- -- -- --
9. Sulphur % -- -- -- --
Table 5/6: TUNGSTEN ALLOY STEEL
Serial
H12 H21
No.
Element
Min. Max. Min. Max.
(1) (2) (3) (4) (5) (6)
1.
Carbon % 0.30 0.40 0.26 0.36
2.
Manganese % 0.20 0.60 0.15 0.40
3.
Phosphorus max % - 0.03 - 0.03808 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
4.
Sulphur max % - 0.03 - 0.03
5.
Silicon % 0.80 1.25 0.15 0.50
6.
Chromium % 4.75 5.50 3.00 3.75
7.
Vanadium % 0.20 0.50 0.30 0.60
8.
Tungsten % 1.00 1.70 8.50 10.00
9.
Molybdenum % 1.25 1.75 - -
(b) The manufacturers shall supply an analysis of each cast when required by the Inspecting
Authority to do so. Should independent analysis be required, these shall be made at the
rate of one per cent.
(c) All springs shall be formed hot and suitably hardened and tempered.
(d) All the springs above 16 mm bar diameter shall be formed hot and the springs below 16
mm bar diameter shall be formed hot or cold. The springs shall be suitably hardened and
tempered.
(2) Torsion bars shall be manufactured from steel which shall have a yield point of not less
than 141 kg/mm2.
Note: Special steels developed by individual manufacturers may be accepted by the Chief
Inspector of Boilers at their discretion.
213. Dimensions.─ (1) For ordinary lift valves, the compression or extension of safety valve
springs required to load the valves to the set pressure shall not be less than one quarter of
the diameter of the valve due consideration being given in the case of spring loaded level
safety valves to the ratio of leverage.
(2)The proportion of unloaded length to external diameter of the spring shall not exceed
4:1.
(3) These requirements do not apply to full lift and high lift safety valves.
214. Determination of Maximum Allowable Working Pressure.─(1)The maximum
allowable working pressure to be allowed for steel springs of round, square or rectangular
section shall be determined from the following formulae for springs in extension.
(a) Round section ---
10,000 πd3
P = Equation (5/9)
DACK
(b) Square Section ---
33,333d3
P = Equation (5/10)
DACK[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 809
(c) Rectangular section ---
160,000 B2 H2
P = Equation (5/11)
DACK (3B + 1.8H)
Note:For Springs in Compression, the maximum allowable working pressure
calculated by the above equation may be increased by 25 per cent.
Where, (all dimensions in inches):-
4 (D – 1)/d 0.615
K = + Equation (5/12)
D D
(In case of rectangular section substitute B for d)
P = maximum allowable working pressure in lb. Square inch (set pressure)
A = Loading area of valve,
D = diameter of round or side of square steel,
B = Breadth of wire (radial to spring axis).
H = Depth of wire (parallel to spring axis).
D = Mean diameter of coil,
L + L
1 2
C = Constant = --------- Equation (5/13)
L
1
L = Initial compression or extension of the spring to give the required loading (P
1
x A),
L = the further compression or extension of the spring to give the lift as defined
2
in regulations 193 to 195 and 207.
EXAMPLES:
C = 2 where compression or extension of spring to give the required loading is
¼ diameter of valve.
C = 1.5 where compression or extension of spring to give the required loading is
½ diameter of valve.
C = 1.25 where compression or extension of spring to give the required loading
is full diameter of valve.
Note: (1) The above formulae are based on the maximum allowable safe stress of
5,624 kg/cm2(g) on the section of the springs under extension and 7,030
kg/cm2(g) where they are in compression.
(2) The above values of ―C‖ apply only to the case of ―full-lift‖ Safety Valves,
where L is equal D/4 in case of ―high-lift‖ and ―ordinary lift‖ Safety
2810 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Valves, respective values of ―C‖ may be worked out by using appropriate
values of L .
2
(2) In the case of torsion bars, the maximum shear stress as calculated from the
following formula shall not exceed 55 kg/mm2.
TDC
f = ------- Equation (5/14)
s
2J
Where,
f = Shear stress
s
T = Torque at set pressure,
D = Outside diameter of the bar,
J = Polar moment of inertia of the section the bar, and
Angle of twist at full lift valve
C = ---------------------------------------
Angle of twist at set pressure
(as furnished by the manufacturer).
The dimensions of sleeve transmitting the torque shall be of substantial proportions
for the material used.
215. Test.─(1)The permanent set in the spring (defined as the difference between free
height and height measured ten minutes after the spring has been compressed solid three
additional times, after pre-setting at room temperature) shall not exceed 0.5% the free
height.
(2) Torsion bars shall not show a permanent distortion after being twisted to an angle
fifty per cent in excess the working angle.
216. Extension Springs.─Extension springs shall be made from round section wire.
217. Number of Effective Coils.─ The number of effective or free coils in a compression or
extension spring shall be determined from the following formulae:
(i) For Round or Square wire
KCd4
N = Equation (5/15)
SD3
(ii) For Rectangular Wire
66B3H3K
N = Equation (5/16)
(B2 + H2) SD2
Where,[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 811
N = Number of effective coils,
K = Compression or tension in inches at set pressure,
C = 22 for round, 30 for square steel,
d = diameter or side of square steel in 16th of an inch,
S = load on spring in lbs. at blow off pressure,
D = mean diameter of coil in inches,
B= breadth of wire in 16th of an inch,
H= Depth of wire in 16th of an inch.
218. Spacing of Coils.─ The space between the coils when the valve is lifted to 1/4th of its
diameter, shall be not less than 1.6 mm for full lift valves and 0.8 mm for ordinary and high
lift valves.
219.Finishing of Ends.─ Compression springs shall have their ends ground flat and smooth
and at right angles to the axis of the springs over the full circumference so that when placed
on end on a horizontal plane the springs will stand perpendicular.
PART-V
220.Lever valves.─Where the valve is operated by means of a lever, whether hand or
mechanically controlled, the lever shall be of ample strength and the bearings shall be so
designed as to allow free working of the valve under all conditions of service.
221. Steam stop valve.─(1) (a) The stop valve connecting the boiler or super heater to the
steam–delivery pipe shall be located as near the outlet from the final superheater header as
is convenient and practicable or in case of boilers without super-heaters as close as
practicable to the drum.
(b) Where two or more boilers are connected with a steam receiver or any other vessel, a
steam stop valve shall be fitted between the boiler and such receiver or vessel.
(2) (a)Steam stop valves shall be attached direct to the boiler shell or to suitable pads or
stand blocks and the neck or the valve chest shall be reasonably short and of strong
construction.
(b) The steam stop valve may also be attached to a stand pipe, a connecting pipe or the
super-heater header.
(c) The attachment may be made by bolted flanges or butt-welded joints. Such butt- welded
joints shall be suitably stress relieved, where necessary:
Provided that in the case of a larger boiler in which it is proposed for the purpose of drainage
or owing to obstruction to connect the steam–pipes to the steam stop valve at a higher level
than would be obtained under this regulation, a vertical stand pipe not exceeding 5
diameters in height will be permitted between the stop valve and the boiler. Such stand pipes
shall be of strong construction and of wrought iron, mild steel, or cast steel. The flanges of
wrought or mild steel pipes shall be welded to the pipes, and there shall be no branch on the
stand pipe for any other connection:812 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Provided also that in the case of large boiler in which it is desired to fit a tee piece for
the purpose of providing a branch connection between the stop valve and the boiler, such a
tee piece may be so fitted, the tee piece shall be of strong construction, of wrought iron, mild
steel, or cast steel and shall not exceed 2½ diameters in height and a stop valve shall be
fitted direct to each tee piece branch.
(3) When two or more boilers are connected to a common steam main and there are no
combined stop and isolating valves fitted to them an automatic isolating valve shall be
compulsory. In the case of boilers fitted with welded pipes, fitting of an independent
automatic isolating valve shall be compulsory.
PART -VI
222.Blow-down cock or valve and pipes.─ (1) The blow-down cock or valve shall be of
substantial construction.
(2) The waste pipe attached to the cock or valve shall not be bound fast in arch or brick work
and shall discharge at a point where there is no danger of injury to any person.
(3) These pipes shall not be connected to a pipe common to another boiler.
(4) The continuous blow-downs may, however be connected to a common header
discharging freely to an adequately vented tank or sump.
(5) The headers shall be of sufficiently large cross- section and the blow- off tank shall be
provided with a vent pipe free from valves and of sufficient size to prevent accumulation of
pressure. If, however, the tank is intended for collecting flash steam, a safety valve of
adequate capacity shall be provided.
(6) The tank shall be so located that all parts will be accessible for inspection.
223 Blow-Down mountings.─(1) Each boiler shall be fitted with a suitable blow-down valve
or cock placed at, or as near as practicable, to the lowest point of the boiler.
(2) (a) For locomotive, vertical and marine type boilers, the valve or cock shall be attached
direct to the boiler or to a suitable pad or stand pipe.
(b) For water tube boilers the valve or cock shall be outside the brick work with a
substantial steel pipe between it and the mud box.
(3) For Cornish and Lancashire boilers, the cocks or valve may be attached to a cast steel
elbow pipe of substantial section bolted to a suitable stand pipe or pad welded to the boiler.
But cast iron elbow pipes shall not be permitted.
224.Blow-Down Valve or Cock.─(1) Each valve or cock shall be fitted with a device which
shall clearlyindicate its open and closed positions, and any key or similar device for
operating the valve or cock shall be such that it cannot be removed unless the valve or cock
is fully closed.
(2) The locking feather shall be secured by welding.
(3) Cocks fitted with taper plugs shall be of the bolted cover type with separate packing
glands.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 813
PART -VII
225.Water Gauges.─(1)Every boiler shall have two means of indicating the water in it outof
which one shall be conventional gauge glass:
Provided that in the case of boiler drums below 91 cm diameter where there is difficulty
in fitting two water gauges, two test cocks and a glass water gauge shall be fitted.
(2) (a) The lowest visible part of the glass of the water gauge and lower test cocks shall
be fixed at safe working level.
(b) For locomotive type and vertical boilers this shall not be less than 50 mm above the
highest part of the firebox roof plate. Minimum length of the visible portion of the gauge
glasses shall be 200 mm.
(c) The length may be increased depending upon the capacity of the boiler by the
Inspecting Authority.
(3) (a) Glass water gauges shall be so placed as to be easily seen and reached by the
boiler attendant.
(b) The fittings of glass water gauges and test cocks shall be of substantial make with
large passage ways through them to facilitate cleaning.
(c) The gauge cocks when open shall have their handles in a vertical direction and each
handle at its junction with the plug shall be plainly marked with a deep line to indicate the
direction of the passage way through the plug.
(d) When detachable handle are provided arrangement shall be made to prevent
incorrect fitting of the handles.
226. Drains.─A drain cock or valve with a suitable discharge pipe shall be fitted to each
water gauge.
227. Protectors.─ (1) Where tubular glass water gauges are fitted, substantial protectors
shall be provided.
(2) The glass shall be suitably treated to prevent splintering.
228. Glass Size.─ Tubular water gauge glasses shall be not less than 13 mm and not more
than 19 mm outside diameter.
229. Safety Devices.─ Water gauge glass mountings shall be fitted with self-closing
devices in the bottom arms and it is recommended that a similar device may be fitted in the
top arm.
230. Gauge Columns.─ Where the gauges are mounted on a column, there shall be no
connecting passage between the top and bottom arms of the column unless valves or cocks
are fitted between the columns and the boiler.
231. Isolating Cocks.─ Where isolating cocks or valves connecting water gauge pipes to
the boiler are fitted, they shall be not less than 25 mm bore and of the bolted cover type with
separate packing gland.814 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
PART -VIII
232. Pressure Gauges Dials.─ (1) For pressure upto35 kg/cm2 (g), pressure gauge dials
shall be graduated in kg/cm2(g) from zero to twice the pressure as nearly as may be
practicable.
(2) For pressure exceeding 35 kg/cm2(g),the range of the graduation shall be from zero to
one and a half times the maximum allowable working pressure, as nearly as may be
practicable, but in no case shall the maximum graduation on the gauge be less than 70
kg/cm2 (g).
(3) The scale on the dial shall be clearly and permanently marked in kg/cm2 (g).
(4) The maximum allowable working pressure shall be marked in red on the dial of each
pressure gauge.
(5) (a) Where the gauge is compensated for a head of water between the gauge and the
boiler connection, the amount of such compensation shall be marked on the dial.
Pressure gauge shall be calibrated within an accuracy of +1 percent.
(b) Boiler pressure gauges shall not be less than 150 mm in diameter.
(6) The travel of the pointer of the dial gauge shall not exceed 325°.
233. Connections.─All pressure gauges shall be fitted with a syphon pipe and a cock or
valve integral with, or adjacent to, the gauge in such manner that the gauge may be shut off
and removed whilst the boiler is under steam.
234. Gauge Cocks.─The handles of the gauge cocks shall be parallel to the pipes in which
they are located when the cocks are open and marks shall be cut on the shank of the cock
indicating open position.
235.Test Connections- Competent Person’s Pressure Gauge Attachment.─ (1)Every
boiler shall be fitted with a valve or cock carrying in a vertical position a receiving screw for
attachment of the Competent Person‘s pressure gauge.
(2) The receiving socket shall be tapped for M/20 x 1.5 metric threads and shall be fitted with
an easily removable cap.
PART -IX
236. Fusible Plugs.─(1)Fusible plugs shall be of sufficient height and fitted in such a
position as to give early protection to all parts of the boiler liable to damage by the direct
application of furnace heat in the event of shortness of water.
Note: For example - In Lancashire boilers the fusible plugs shall be in the crowns of the
furnaces from 305 mm to 457 mm in front of the brick work fire bridge.
(2) (a) On boilers having wet back reversing chamber, a minimum of two fusible plugs
shall be fitted; one on the crown of the reversing chamber and the other on one of the tube
plates. On boilers not having wet back reversing chamber, at least one fusible plug shall be
provided on the front end tube plate.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 815
(b) The plug shall be fitted in such a way that in the event of fusion of the plug, the pressure
inside the boiler shall push the pellets out.
237.Type.─ (1) Fusible plugs shall consist of an outer body with a central conical passage.
(2) The smallest part to be not greater than 13 mm for plugs suitable for pressures up to 7
kg/cm2(g) and not greater than 10 mm for plugs for pressures exceeding 7 kg/cm2 (g).
(3) The passage shall be closed by a plug secured by an annual lining of fusible alloy so that
the plug may drop clear if the lining melts.
(4) The portion of the body carrying the fusible metal shall preferably be detachable from the
base to allow of easy replacement without removing the whole fitting from the boiler.
238. Material.─(1) The non-fusible portions of the plug shall be of bronze except where the
nature of the boiler water precludes the use of non-ferrous material.
(2) The fusible metal shall be ofan alloy melting readily at a temperature not less than 66°C
in excess of the saturated steam temperature at the design pressure of the boiler.
239. Attachment to Boiler.─ (1) Wherever practicable, fusible plugs shall be screwed into
the boiler plates from the water side.
(2) The screwed portion shall have threads of Whitworth form not more than 11 per 25 mm.
PART -X
240.Feed Valves.─ (1) Feed check valves shall be of the non-return type.
(2) Where the valve is not of screw-down non-return type, a separate screw-down valve
shall be provided.
(3) The discharge from the feed check valve or from the internal feed pipe (if provided)
shall be above low water level and in the case of Lancashire and Cornish boilers, shall
be at least 152 cm beyond the fire bridge:
Provided that the aforesaid restriction regarding the position of feed discharge level
shall not apply in the case of water tube boilers.
241. Operating Position.─Feed check valves or regulating valves shall be so arranged as
to enable them to be satisfactorily operated from the boiler floor.
242. Requirements as to Feed Apparatus in certain cases.─In the case of a battery of
boilers connected to a common feed range, the requirements ofregulation181 in respect of
the number of feed apparatus shall be considered to have been fulfilled provided a total
supply of feed water, not less than the combined maximum continuous rating of all active
boilers can be maintained even if any one of the sources of power supply fails.816 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER -6
BOILER AND SUPERHEATER TUBES, HEADERS AND OTHER
PARTS
PART-I
243. Material and Constructionof Tubes.─The requirements shall comply with regulation
122.
244.(1)(a)(i)The maximum allowable working pressure of the tubes shall be determined by
the following formula: -
2f (T – C)
P = ---------------- Equation (6/1)
[D – (T - C)]
Where,
T = minimum thickness of tubes, that is, nominal thickness less the
permissible negative tolerance in mm,
C = 0.75 mm for working Pressure up to and including 70 kg/cm2 (g)or
C = 0 for working Pressure exceeding 70 kg/cm2 (g).
P = Maximum allowable working Pressure of boiler in kg/cm2 (g),
D = External diameter of tube in mm,
f = maximum permissible stress values as available in the governing
codes of the country of the material to which it belongs in kg/cm2. In
case of non-availability of the value, the following procedure for
evaluating the permissible stress values shall be adopted.
(ii) The minimum required thickness of tubes shall be determined by the following
formula:
Equation (6/2)
Where,
t = minimum thickness of tube in mm,
C = 0.75 mm for working pressure up to and including 70 kg/cm2 (g)or
C = 0 for working pressure exceeding 70 kg/cm2 (g).
P = maximum allowable working Pressureof boiler in kg/cm2 (g),
D = External diameter of tube in mm,
f = maximum permissible stress values as available in the governing
codes of the country of the material to which it belongs in kg/cm2. In case of[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 817
non-availability of the value, the following procedure for evaluating the
permissible stress values shall be adopted.
(A) For temperature at or below 454°C,
T E
s t
--- or ----- whichever is lower
2.7 1.5
(B) For temperature above 454°C
S
r
--- or S whichever is lower
c
1.6
Where T = minimum tensile strength of the material at room temperature,
s
E = yield point (0.2 % proof stress) at working metal temperature ‗t‘,
t
S = the average stress to produce rupture in 100,000 hours and in no case
r
more than 1.33 times the lowest stress to produce rupture at the working
metal temperature,
S = the average stress to produce an elongation of 1 percent (creep) in
c
100,000 hours, at the working metal temperature.
Note: In case S values are not available in Material Standard and such materials are
c
known to have been used in boilers in India or abroad, then for such materials the
allowable stress may be taken as the lower of
E S
t r
---- or -----
1.5 1.6
(b) The working metal temperature shall be taken as following, namely:-
(i) for integral economiser tubes, the maximum water temperature for which the
part of the element is designed plus 11°C.
(ii) for furnace and boiler tubes, the saturation temperature corresponding to the
working pressure plus 28°C.
(iii) for convection super heater tubes, the maximum steam temperature for which
the part of the element is designed plus 39°C.
(iv) for radiant super heater tubes the design maximum steam temperature plus
50°C.
(2) However, in no case, the thickness of tubes as suppliedshall be less than those
given in the table below (subject to tolerances specified in sub-regulation (5)
ofregulation47 and sub-regulation (5) ofregulation49:818 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
TABLE 6/1
Serial Outside diameter Seamless Hot finished Seamless Cold drawn
No. or electric resistance
welded
(1) (2) (3) (4)
1. Upto and including 32 mm 2.9 mm 2.03 mm
2. Over 32mm upto and 3.25 mm 2.34 mm
including 51 mm
3. Over 51mm upto and 3.35 mm 2.64 mm
including 76 mm
4. Over 76 mm upto and 3.25 mm 3.25 mm
including 89 mm
5. Over 89 mm upto and 3.66 mm 3.66 mm
including 114 mm
In the case of coiled tubes for boilers of forced circulation type, the minimum thickness
of tubes as supplied may, however, shall be as follows:
Table 6/2
Serial No. Outside diameter of tubes in mm Minimum
thickness
(1) (2) (3)
1. Upto and including 29 mm. 1.62 mm.
2. Over 29 mm. Upto and including 35 mm. 1.83mm.
3. Over 35 mm. upto and including 42 mm 2.34 m.
(3) (a) Tubes that are hot or cold bent for parts of boilers, including economizers,
furnace walls, superheaters and reheaters, shall comply with this clause and
suitably heat treated as under:
For Carbon steel / Alloy steel (except P-91 and Austenitic Stainless steel)
- If percentage thinning is more than 25% - Post Bend Heat Treatment (PBHT)
required.
- If Outer Diameter (OD) is less than 141.3 mm and R/D ≤ 1.30 – PBHT
required.
- If Outer Diameter (OD) is more than 141.3 mm and R/D ≤ 2.5 – PBHT
required.
For P-91 and Austenitic stainless steel – requirements as specified in the material
specifications shall be followed.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 819
Where, R is the mean radius of the bend to the centre line of the tube (in mm)
and D is the outside diameter of the tube (in mm).
Butt welds shall not be permitted within bends.
Thinning and departure from circularity limits shall be demonstrated by one of the
following methods.
(a) relevant and satisfactory service experience;
(b) a procedure test;.
(c) by measurement of 2% of the bends, including the first bend of each shift.
The method selected shall be at the option of the manufacturer.
(b) Thinning on tube bends shall comply with the following:
(i) At any location around the bend extrados, the reduction in thickness (in
per-cent) below the calculated minimum permissible design thickness of
the straight tube, except where permitted by (ii), shall not exceed:
_100_
4R + 2
D
Where,
R is the mean radius of the bend to the centre line of the tube (in mm).
D is the ordered outside diameter of the tube (in mm).
(ii) Bend thickness below the minimum value required under (i) shall be
permitted in cases where the manufacturer can demonstrate by bursting
tests carried out on at least three bends that the strength of the bend is
not less than that of the straight tube.
(iii) Where the amount of thinning at any location around the bend extrados
on cold formed bends exceeds 25% of the actual thickness of the tube
on the straight the bends shall be suitably heat treated. The actual
thickness of the same plans as the line of the extrados at each end of
the bend.
(c) The departure from circularity at the bend apex shall not exceed 10% for bends
performed in a single bending operation and 15% for bends which are hot pressed
after the primary, bending operation.
The departure from circularity (in percent) shall be calculated from:
D - D
max min
100
--------------------
D
Where,
D = is the maximum outside diameter measured in the tube bend apex (mm),
max820 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
D = is the minimum outside diameter measured at the same cross section
min
AsD (mm)
max
D is the ordered outside diameter of the tube (in mm).
PART-II
245. Material and constructionof Headers and similar pressure parts.─The materials
and construction shall comply with Chapter-2 and Chapter-3.
246. Rectangular Headers symmetrical in form.─(1) The maximum allowable working
pressure shall not exceed the smaller of the value obtained from the following formula:
(a) cf(t – C )2
1
P = ------------------- Equation (6/3)
b2
(b) 6.25t2.f.E
P = ------------ Equation (6/4)
w2
Where, P = maximum allowable working pressure,
t = thickness,
b = internal breadth between the supporting sides of the header,
c = 3.413 for wrought steel and 2.926 for steel castings,
Where the sides are corrugated or otherwise reinforced by
substantial supports so that the length of the portion between
the corrugations or supports does not exceed b, shall be taken
as 5.82 for wrought steel and 5.12 for steel castings,
f = permissible stress at working metal temperature as given in
the table6/3 under sub-regulation (3),
c = 0.08 cm,
1
w = internal width of the header between the tube plate and the
Opposite side,
E = efficiency of ligaments between the holes.
(2) If the faces of the headers are machined locally at the tube holes or hand
holes, the thickness at the part may be as much as 4.8 mm less than given by
the above equation; but irrespective of the thickness obtained by the use of
the formulae, the thickness of the headers at the tube holes shall not be less
than:-
t = √(C x d + C ) Equation (6/5)
1
where, t = thickness,
d = diameter of the hole,
C = 0.2235 mm,
C = 6.4 mm.
1[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 821
In no case shall the thickness be less than 8 mm except that in small patches not
exceeding 322 mm2 in area, the thickness may be 50 percent of the thickness
used in the Equations (6/3) and (6/4)
(3) The permissible stress at working metal temperature shall be as given in the
table below:-
Table 6/3: Permissible Stress at Working Temperature for Rectangular
Section Headers
Serial No. Working Metal Cast steel Carbon and Alloy Steels
Temperature 44-45
in degrees kg/mm2
C kg/cm2 (g) The lower value obtained in each case at the
specified temperature calculated on the
following basis:
(1) (2) (3) (4)
1. 288 703 For temperatures at or below 454°C
2. 316 633
3. 343 562 T.S E
t
4. 371 532 ----- or ----
5. 399 505 2.7 1.5
6. 427 475 For temperatures above 454°C
7. 454 443 S r
--- or S
8. 482 309 c
1.6
Where, Ts = minimum tensile strength of the material at room temperature,
Et = yield point (0.2% proof stress) at the working metal temperature ‗t‘,
Sr = the average stress at the temperature ‗t‘ to produce rupture in 100,000
hours and in no case more than 1.33 times the lowest stress to produce
the rupture in 100,000 hours,
Sc = the average stress at the temperature ‗t‘ to produce an elongation of
1% (creep) in 100,000 hours.
(4) The working metal temperature shall be taken asfollows:
(a) For saturated steam and water drums and headers, the saturation
temperature corresponding to the working pressure of the boiler plus 28°C.
(b) For superheater headers, the designed maximum steam temperature for
the header plus 28°C.
(5) (a) Where headers are adequately protected from the gases of combustion or
swept by such gases in the third or subsequent pass of a boiler, the working
metal temperature shall be taken as the saturation or designed maximum
steam temperature as defined above, whichever applies.
(b) A covering or refractory or insulating material which may be liable to
become dislodged shall not be deemed adequate protection.822 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) (a)The ends of rectangular headers may be formed integral with the header or
attached by welding.
(b) The maximum allowable working pressure for the flat ends shall be
calculated by the following formula: -
f (t – C)2
P = ----------------- Equation (6/6)
d2K
where, P = Maximum allowable working pressure in kg/cm2 (g),
f = maximum permissible stress values as available in the
governing codes of the country of the material to which it
belongs (kg/cm2),
t = thickness of the plate at the weakest part in mm,
d = the least width between the walls of the rectangular header in
mm,
C = 1 mm,
K = 0.32 for ends integral with or flanged and butt welded to the
header,
= 0.40 for ends directly strength welded to the header in an
approved manner.
247. Headers irregular in form.─ (1) In cases where the headers are of such irregular form
as to render the application of a formula for the determination of thicknessimpracticable, the
manufacturer shall show the suitability of the headers for the working conditions by indicating
practically the maximum internal hydraulic pressure which a header, made to the same
design and of similar material, will withstand without permanent deformation.
(2) The maximum working pressure for similar headers may then be determined by the
following formulae:-
Permissible stress at working metal temperature
Permissible stress at working metal temperature
P = P x --------------------------------------------------------------------
1
F x C
Equation (6/7)
Where,
P = The maximum allowable working pressure in lbs. per sq. in.,
P = The maximum internal hydraulic pressure withstood without permanent
1
deformation,
F = 1.75 for wrought steel and 2 for cast steel,
C = 15500 for wrought steel of 24 tons per sq. in. minimum ultimate tensile stress,
= 16500 for wrought steel of 26 tons per sq. in. minimum ultimate tensile stress,
= 18000 for wrought steel of 28 tons per sq. in. minimum ultimate tensile stress,
= 21000 for wrought steel of 32 tons per sq. in. minimum ultimate tensile stress,
= 22000 for wrought steel of 34 tons per sq. in. minimum ultimate tensile stress,
= 15500 for cast steel of 28 tons per sq. in. minimum ultimate tensile stress.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 823
248. Cylindrical Headers.─ (1)Where cylindrical headers are provided, their maximum
allowable working pressure shall be determined by Equation (6/1).
(2) The attachment of ends and the method of calculating the maximum allowable
working pressure shall be in accordance with clause (b) ofsub-regulation (6)of
regulation 246, subject to the following modifications:-
K = 0.19 for ends integral with or flanged and butt welded to the header.
= 0.28 for ends directly strength welded to the header in an approved
manner, and
d = internal diameter of the header.
The required thickness shall be determined by the following formula:
√ Equation (6/8)
Where,
P = maximum allowable working pressure in kg/cm2 (g),
f = maximum permissible stress values as available in the governing codes of the
Country of the material to which it belongs (kg/cm2),
t = thickness of the plate at the weakest part in mm,
C = 1 mm,
K = 0.19 for ends integral with or flanged and butt welded to the header.
= 0.28 for ends directly strength welded to the header in an approved manner,
d = internal diameter of the header.824 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER -7
PIPES AND FITTINGS
249. Pipes.─(1)(a) Steam-pipes may be ofcarbon steel, cast steel, alloy steel and nickel
alloys.
(b) Pipes may be solid drawn (cold or hot finished), butt welded or electric resistance
welded.
(2) Where, material used is in conformity with the code of the country of manufacture
and in accordance with provisions of these regulations, the permissible stress figures
specified in the code at different temperatures may be accepted in lieu of figures
computed from the data required to be furnished under regulation 256 in any of the
following cases, namely:-
(a) Where a certificate is furnished from the Inspecting Authority to the effect that the
steel complies with requirements of the steel grade (to be specified by the
Inspecting Authority) and that the permissible stress for the working condition as
allowed for in the code of the country of manufacture falls within the permissible
limits under theseregulations.
(b) Where the basis upon which these stresses have been arrived at is made
available and such basis is not found as to give rise to stresses higher than those
permissible under the regulations.
(c) Where pipes have to be fabricated by longitudinal fusion butt electric arc welding of
plates rolled to shape, the limits provided for butt welded pipes in Table 7/4 under
regulation 255 shall not apply.
(d) The requirements other than those relating to the minimum thickness of shell for
fusion butt welding provided in Chapter-12 shall be applicable to such pipes.
(3) Notwithstanding anything contained in Chapter-7, the hydraulic test for pipes in
maker's premises may be dispensed with by the Inspecting Authority:
Provided that these pipes have been fully tested by non-destructive
examination by radiographic or ultrasonic techniques:
Provided further that in the case of pipes having internal diameter 1000 mm
and more, the plates used for the manufacture of pipes and the long seam welds of
pipes are fully tested by non-destructive examination like ultrasonic or radiographic
testing and the soundness of pipes both in the parent material and in the weld is
established in the maker's premises; and the whole component of the pipes, after
completion of any further fabrication and erection at site, are hydraulically tested at a
pressure not less than 1.5 times the maximum allowable working pressure of the
piping system:
Provided also that in the event of detection of any defect after conducting
hydraulic test of these pipes at site, it shall be the responsibility of the manufacturer[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 825
to repair or replace the defective pipes, as may be deemed necessary by the
Inspecting Authority.
(4) Electric fusion welded pipes in which the butt-welds are fully radiographed or
ultrasonically tested need not be hydraulically tested in the shops provided the pipe
system as a whole is hydraulically tested at site to the requisite test pressure in
accordance withregulation292.
(5) In the case of fusion welded pipes, test plates to represent all welded seams shall be
attached at each end of longitudinal seam and tested in accordance with the Chapter
-12 provided that one test plate may represent a lot of pipes up to 60 m in length and
of the same grade of material and same thickness of the pipe subject to the same
heat treatment.
PART-I
250.Material of steel pipes.─(1) (a) The pipes shall be made from steel made by an Open
Hearth or Electric Process or by any of the Oxygen Processes.
(b) Hot finished seamless pipes may, however, be made of Bessemer Steel.
(c) Bessemer Steel shall not be used for pressures exceeding 21 kg/cm² or temperatures
exceeding 260°C and If the Bessemer process is used, the steel shall be made by a
manufacturer approved by Inspecting Authority.
(d) When pipe is used for temperatures exceeding 399°C the steel shall be of non-
segregated or fully killed type.
(2) Carbon and alloy steel pipes shall not be used for design temperatures exceeding
those given in Table 2/1 of regulation30.
(3) For design temperature over 427°C, precaution shall be taken to ensure that the
surface condition of the pipe is suitable for such requirements.
(4) (a) The material from which seamless pipes are made, shall conform to appropriate
specifications of pipesasin regulation 49 and electric resistance welded pipes are
made, shall conform to the appropriate specification of tubesas in regulation 30.
(b) The materials from which butt welded pipes are to be made shall conform to the
requirements of Table 7/3 under regulation 253.
251. Condition of pipes.─(1)All pipes shall be commercially straight, free from longitudinal
seaming, grooving, blistering or other injuries surface marks and the ends of the pipes shall
be cut square.
(2) The pipes shall be made within the limits of tolerances asgiven below:-826 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Table 7/1
Serial No. Class Tolerance on
Nominal
Outside diameter
thickness
Up to and including 51 Over 51
mm mm
(1) (2) (3) (4) (5)
1. Seamless or
Electric Resistance As per regulation 49.
Welded(*E.R.W)
2. + no limitation
Butt welded ± 1% ± 1%
- 12.5%
PART-II
252. Number of sets of mechanicaltests .─ (1) The number of pipes on which mechanical
tests are to be performed shall be as follows:-
Table 7/2
Seamless pipes As per regulation 49
Welded pipes 2 per cent of the lengths of pipes as made.
(2)In the case of pipes for designed temperatures over 454°C, every pipe over 114
mm outside diameter shall be tested.
253. Tests.─ (1) For pipes up to and including 102 mm Nominal bore, flattening testshall be
as per requirements of Chapter-2as under,-
(a) For cold drawn seamless construction – Sub-regulation (4) of regulation 48.
(b) For hot finished seamless construction – Sub-regulation (10) of regulation 49.
(c) For Electric resistance welded pipes – As per relevant material specifications.
For pipes where the ratio between the wall thickness and the diameter would
not permit the maintenance of the distance between the flat surfaces specified in the
above regulation, this shall be limited to 2/3rdofthe bore of the pipe.
(2) For cold Bend Test for pipes over 102 mm Nominal bore , a strip not less than 38
mm wide cut circumferentially from one end of each selected pipe shall when cold
withstand, without showing either crack or flaw being doubled over in the direction of
original curvature round a bar, the diameter of the bar being:
For pipes up to and including 10 mm thick 3 Times the thickness
For pipes over 10 mm thick 4 Times the thickness
(3) For Bend Test on the Weld; a strip not less than 38 mm wide cut circumferentially
from one end of each selected pipe with the weld near the middle of the strip, shall
when cold withstand, without showing either crack or flaw, being doubled over in the
direction of original curvature round a bar, the diameter of the bar being equal to[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 827
eight times the thickness of the test piece, the weld being placed at the point of
maximum bending.
In cases where the outside diameter of the pipe is less than 8 times the wall
thickness, the diameter of the former shall be equal to 4 or 2/3rd of the nominal bore
of the pipe, whichever is less.
(4) Additional Tests;In case a pipe selected for testing fail in any one or more of the tests
specified above, two further tests of the same kind may be made from the same or
another pipes from the same batch. In case either of these further tests fail, the pipes
represented may be reheated and then re-tested. If the repeat tests are satisfactory,
the pipes shall be accepted provided they comply with other requirements, but if
failure again occurs, the pipes which the test pieces represent shall be rejected.
(5) Tensile Testshall be as per Chapter-2.
(6) Test for Valves and Fittings shall beas per sub-regulation (5) of regulation 191.
Table 7/3: Carbon Steel
Serial No. Butt welded pipes
Ultimate tensile Minimum elongation percentage
Phosphoru
strength in Sulphur
Kind of pipes kg/mm2 On 203 mm On 51 mm percentage s
percentage
Not Not 6mm Less 6 mm Less than (maximum)
(maximum)
less more thick & than 6 thick & 6 mm
than than over mm thick over thick
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
1. Strips cut from
the pipes clear 35 44 20 18 32 30 0.05 0.05
of the welds
and tested in
their curved
position
2. Test lengths
taken from 35 44 25 23 - - 0.05 0.05
finished pipes
(ends of pipes
to be plugged
for grips)
3.
Ultimate tensile
strength in Minimum elongation per cent on 203 mm Phosphoru
Selected Sulphur
Kg/Sq. mm s
Samples cut percentage
percentage
4. transversely Not Not 13mm Less than 13mm Less than (maximum)
(maximum
less more thick & thick and not less 6 mm
than than over than 6 mm thick thick
5. 36 44 23 20 18 0.05 0.05
254. Method of manufacture, heat treatment and marking.─ (1) On completion of any
work which involves heating, whether for hot bending of the pipe or for any other similar
purpose, the pipe shall be carefully annealed.
(2) (a) The cold drawn seamless carbon steel pipes and welded carbon steel pipes shall
be supplied in normalised condition.828 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) Hot finished seamless carbon steel pipes shall be supplied in hot finished
condition or in normalised condition at the option of the manufacturer.
(c) The seamless alloy steel pipe either cold finished or hot finished and welded
pipes shall be supplied in normalised and tempered condition.
(d) By agreement between the users and the manufacturer, the pipes may be
delivered in a condition other than normalised and tempered condition in which case
they shall be suitable for subsequent manipulation and the user shall be informed of
the heat-treatment necessary to give required properties.
(3) (a) (i) Pipe bending and forming (reducing or swaging) operation shall be done by any
hot or cold method and to any radius which shall result in a surface free from cracks,
buckles or other defects as determined by the method of inspection specified in the
design.
(ii) A post bending or post forming heat treatment for carbon steel material is required
with a nominal wall thickness in excess of 19 mm unless the bending or forming
operation are performed and completed at normalizing temperatures, where no further
heat treatment is required.
(iii) The heat treatment where required, shall be normalised or stress relieved, as the
case may be.
(b) A post bending or post forming heat treatment shall be required for all ferritic alloy
steel material with nominal pipe size 100 mm and larger or with a nominal thickness 13
mm or greater.
(c) (i) If hot bending or forming is performed the material shall receive normalize and
temper or tempering heat-treatment as required by the design.
(ii) For cold operation, tempering heat-treatment shall be applied.
(4) Marking shall be carried out in accordance with regulation 329.
255. Steam pipes and fittings.─The pressure and temperature limits within which pipes,
tees, branches, etc., are to be used, shall be in accordance with Table 7/4as given below:
Table 7/4: Maximum allowable working pressure and temperature
Serial Maximum Maximum
Material group Product
Number allowable permissible
as per Method of manufacture Form
working temperature
Regulation 8
pressure °C
(1) (2) (3) (4) (5) (6)
1. M1/Gr1, Cold drawn seamless No As per Table 2/1 Straight,
M1/Gr2 restriction of Regulation 30 bends or
fittings
2. Hot finished seamless No As per Table 2/1 -do-
restriction of Regulation 30
3. Butt welded [Max. nominal 21 kg/cm2 260 -do-
bore allowable 102mm] (g)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 829
4. Electric Resistance welded No As per Table 2/1 -do-
restriction of Regulation 30
5. Cast Steel Castings No 454 -do-
restriction
6. M3/Gr1, Cold drawn seamless and No As per Table 2/1 -do-
M3/Gr2, Castings restriction of Regulation 30
M4/Gr1
7. M5A/Gr1 Cold drawn seamless and hot No As per Table 2/1 -do-
finished seamless restriction of Regulation 30
256. Steel pipes.─The maximum allowable working pressure allowed on steel pipes shall
be determined as per the following formula: -
(a) Where the outside diameter is the basis for calculation.
2 f E (t – C)
P = ------------- Equation (7/1)
D – t + C
Where,
t = minimum thickness of pipe (mm),
P = maximum allowable working pressure (kg/cm2 (g)),
f = allowable stress as provided under regulation 170(kg/cm2),
D = outside diameter of pipe (mm),
E = efficiency factor,
= 1.0 for seamless and for electric resistance welded steel pipes and for
electric fusion welded steel pipes comply with the requirements of Chapter-2
in which the weld is fully radiographed or ultrasonically tested,
= 0.95 for electric fusion welded steel pipes complying with the requirements
of Chapter-2,
= 0.90 for welded steel pipes for values of t up to and including 22 mm,
= 0.85 for welded steel pipes for values of t over 22 mm and up to and
including 29 mm,
= 0.80 for welded steel pipes for values of t over 29 mm,
C = 0.75 mm.
The minimum thickness of pipe required shall be as per the following formula:
Equation (7/2)
Where,
t = calculated minimum required thickness of pipe (mm),
P = maximum allowable working pressure (kg/cm2 (g)),830 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
f = allowable stress as provided under regulation 170(kg/cm2),
D = outside diameter of pipe (mm),
E = Ligament efficiency as per regulation 171,
C = 0.75 mm.
(b) Where the inside diameter is the basis for calculation.
2 f E (t – C)
P = ------------- Equation (7/3)
d + t – C
Where,
t = minimum thickness of pipe in mm,
P = maximum allowable working pressure (kg/cm2 (g)),
f = allowable stress as provided under regulation 170 (kg/cm2),
d = inside diameter of pipe (mm),
E = efficiency factor,
= 1.0 for seamless and for electric resistance welded steel pipes and for
electric fusion welded steel pipes comply with the requirements of Chapter-2
in which the weld is fully radiographed or ultrasonically tested,
= 0.95 for electric fusion welded steel pipes complying with the requirements
of Chapter-2,
= 0.90 for welded steel pipes for values of t up to and including 22 mm,
= 0.85 for welded steel pipes for values of t over 22 mm and up to and
including 29 mm,
= 0.80 for welded steel pipes for values of t over 29 mm,
C = 0.75 mm.
The minimum thickness of pipe required shall be as per the following formula:
Equation (7/4)
-
Where,
t = calculated minimum required thickness of pipe (mm),
P = maximum allowable working pressure in kg/cm2 (g),
f = Allowable stress as provided under regulation 170 (kg/cm2),
d = inside diameter of pipe (mm),
E = Ligament efficiency as per regulation 171,
C = 0.75 mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 831
257. Cast steel pipes.─ (1) The material shall comply with regulations 50 to57.
(2) The maximum allowable working pressure allowed on cast steel pipes shall be as per
the following formula: -
2S (t – 0.15D – C)
P = ---------------------- Equation (7/5)
D
Where,
t = minimum thickness,
P = Maximum Allowable Working Pressure,
D = External diameter of pipe,
S = Allowable working stress as specified in Table 7/5 or regulation 249,
C = 0.64 cm.
Table 7/5: Maximum Permissible Working Stress for Carbon and Alloy Cast Steel
Pipes
Lower value obtained in each case at the specified temperature calculated on the following basis:-
For service temperature
at or below 454°C T.S. E E S
t t r
------ or ---- and ---- or ---- orS
c
2.7 1.5 1.5 1.5
For service temperature E S
t r
above 454°C ---- or ---- or S .
c
1.5 1.5
Where
T.S. = Minimum Tensile strength of the material at room temperature,
E = Warm yield point (0.2% proof stress) at temperature t,
t
S = The average stress at the service temperature to produce an elongation of 1%
c
(creep) in 100,000 hours,
S = The average stress at the service temperature to produce rupture in 100,000
r
hours at the temperature and in no case more than 1.33 times the lowest stress to
produce rupture at service temperature.
PART-III
258. Flanges of carbon steel pipes.─(1)The material for carbon steel flanges, where
forged, cast or cut from the plates (excluding branches forged integral with the pipes) shall
be made of steel produced by an Open Hearth or Electric process or any of the Oxygen
processes.832 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) Carbon steel flanges shall not be used for temperatures exceeding 454°C and
such flanges shall be made without a weld and free from lamination or other
defects secured by welding.
(3) Blank flanges shall be of mild steel or cast steel and shall be not less in thickness
than the flanges to which they are attached. The material shall comply with the
requirements specified in relevant regulations of chapter-2 or Chapter-4 of these
regulations.
259. Flanges of alloy steel pipes.─ (1) (a) The material for alloy steel flanges where
forged, cast or cut from plates (excluding branches forged integral with the pipes),
shall be made from the steel produced by an Open Hearth or Electric process.
(b)Flanges shall be made without a weld and shall be free from lamination or other defects.
(c) The material of alloy steel flanges shall comply the provisions of regulation 30.
(d) The material for flanges shall be similar to that of the pipes to which they are to
be attached.
(e) The flanges are to be so designed that the total stress induced in them does not
exceed the maximum permissible stress as per criteria mentioned inregulation 170.
(2) Blank flanges of alloy steel shall be not less in thickness that the flanges to which
they are to be attached and the material shall be similar to that of the flanges.
260.Non-ferrous flanges.─ (1) The material for non-ferrous flanges shall be of bronze.
(2)The chemical composition shall comply with the requirements of clause (iv) of sub-
regulation(1) of regulation183.
(3) When flanges are attached to copper pipes by brazing, they shall be secured in
such additional way like forming a conical bore in the flange so that the resistance to
withdrawal from the flange does not depend wholly on the brazing.
261. Screwed on flanges.─ (1) Where flanges are secured by screwing, the screw thread
on the pipes and in the flanges shall be arranged to end at a point just inside the back of
boss of the flange and after the flange has been screwed on, the pipe shall be expanded into
the flange by a roller expander.
(2) Such screwed and expanded flanges may be used for steam for a maximum allowable
working pressure of 31.5 kg/cm2 (g) and maximum temperature of 399 0C and for feed for a
maximum allowable working pressure of 42 kg/cm2 (g).
262. Loose flanges.─ (1)(a)Loose flanges may be used where the joints are made by metal
faces integral with ends of the pipes and alternatively these joints may be welded or seal
welded.
(b) The loose flanges shall conform to the table given in Appendix-F.
(2) Where the joint is formed by integral flanges, after machining these shall be not
less in thickness than the designed thickness of the pipe as calculated by Equation (7/2)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 833
263. Welded on flanges.─ (1) Where flanges are welded on, the welding shall be done by
the oxy-acetylene or metal arc process; the latter with covered electrodes which shall comply
with regulations 71 to76.
(2) (a)The proportion of the weld shall be as indicated in the Figs.7/10 to 7/34(part V of
this chapter) for the following types as mentioned in the Table below,-
Type 1. Welding Neck Flange, Fig.7/10.
2. ‗Face and Back‘ welded – on flange for metal arc welding.fig. 7/26.
3. ‗Bore and Back‘ welded- on flange for metal arc welding.fig. 7/27 and
7/28.
4. ‗Face and Fillet‘ welded- on flange for metal arc welding.fig. 7/29.
5. ‗Bore and Fillet welded- on flange for metal arc welding.fig. 7/30 and
7/31.
6. ‗Slip on‘ welded- on flange for metal arc welding.fig. 7/32.
7. ‗Slip on‘ welded- on bossed flange for oxy-acetylene welding.fig. 7/33.
8. Socket welded flange, Fig.7/34.
The Flange shall not be a tight fit on the pipe.
(b) The maximum clearance between the bore of the flange and the outside diameter of
the pipe shall be 3 mm at any point, and the sum of clearance diametrically opposite
shall not exceed 5 mm.
Note: All dimensions shown in the figures of types 1 to 7 relate to finished sizes.
The design conditions for each type are as follows:
Types 1, 2 and 3 flanges for all maximum allowable working pressure and
temperature conditions.
Types 4 and 5 flanges for all pressure conditions up to and including 42 kg/cm2 (g)
and design temperature not exceeding 399°C.
Types 6 and 7 flanges for all pressure conditions up to and including 17.6 kg/cm2 (g)
and temperature not exceeding 399°C except that Bossed flanges of type 6 shall not
be used on pipes over 304 mm in nominal bore, nor Bossed flanges of type 7 on
pipes 152 mm in nominal bore.
Type 8 flanges for all maximum allowable working pressure and temperature
conditions and this type shall be used only for pipes up to and including 51 mm
nominal bore. These flanges shall not be used where severe erosion or corrosion is
expected to occur.
(3) Type 1,2,3,4 and 5 Carbon Steel types flanges welded on by the metal
arc process shall have the welds stress relieved where the design depth of the weld
recess is greater than 20 mm and all welds joining flanges to alloy steel pipes shall
be stress relieved.
(4) Where type 1 flanges are attached by oxy-acetylene welding, the welds shall be
normalised in accordance with the following requirements:
(a) Welds in mild steel pipes shall be normalised by heating the metal to a
temperature between 900° and 950°C, the temperature then being maintained for not834 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
less than two minutes for pipes up to and including 102 mm bore, and for not less
than five minutes for pipes over 102 mm bore.
(b) Welds in pipes made from the alloy steel shall be normalised by heating
the metal to a temperature between 925° and 975°C, the temperature then being
maintained for not less than two minutes for pipes up to and including 102 mm bore,
and for not less than five minutes for pipes over 102 mm bore.
(c) The higher temperatures of between 950° and 975°C, shall be used for
alloy steels having a carbon content up to and including 0.12 percent and the lower
temperatures of between 925° and 950°C shall be used for alloy steels having a
carbon content of more than 0.12 percent.
(d) After normalising the joint shall be covered with a suitable muff or
asbestos cloth to ensure slow and even cooling.
(e) The normalising of welds in pipes up to 102 mm bore may be carried out
with welding flames the temperature being judged with the aid of a colour card, or
measured by means of one or more thermo-couples or an optical pyrometer.
(f) The normalising of welds in pipes over 102 mm bore shall preferably be
carried out in a portable pipe normalising furnace or muffle, the temperature being
measured by means of one or more thermo-couples or an optical pyrometer.
(g) The width of the zone to be heat treated to the specified temperature shall
extend at least 13 mm on either side of the weld reinforcement.
(5) The procedure to be observed in the stress relieving of welds shall be in accordance
with regulation 123 and stress relieving shall be carried out by any of the following
methods:-
(a) (i) Local heating using a portable muffle furnace, induction coils or other
suitable appliances and due care shall be taken to apply heat uniformly over
the area to be treated.
(ii) The use of procedures not providing adequate control such as manual
operated gas torches are not permissible.
(iii) The temperature shall be measured by the thermo-couples pinned, welded
or otherwise su itably attached to the surface of the pipe and where necessary,
protection from flame impingement shall be taken.
(b) The temperature of the joint during heating in a stationary industrial furnace
shall be measured by thermo-couples appropriately placed within the furnace
as to give a true measure of the joint temperature.
264. Standard flanges.─The size and thickness of flanges and the number and size of their
bolts shall be as shown in Appendix-F.
265. Joints.─ (1) Theseregulations provide for ordinary bolted flange joints and special
types of joints may be used, subject to the approval of the Inspecting Authority or Chief
Inspector, as the case may be.
(2) Welded butt joints of pipes or socket welded joints for pipes, valves and fitting shall
be made by arc welding process and post weld heat treated effectively as per
regulation 123.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 835
(3) Heat treatment shall be carried out by one of the following methods:-
(a) (i) Local heating using a portable muffle induction coils, or other suitable heating
appliance.
(ii) Due care shall be taken to apply heat uniformly over the area to be treated.
(iii) The use of procedures not providing adequate control such as manual operated
gas torches are not permissible.
(iv) The temperature shall be maintained symmetrically over peripheral band of metal
of a minimum width of three times the width of the butt welded preparation.
(v) The temperature shall be measured by thermo-couples pinned, welded or
otherwise suitably attached to the surface of the pipe and, where necessary,
protected from flame impingement.
(b) In case ofheating in stationary furnace, temperature of the joint shall be measured
by thermo-couples so disposed with in the furnace as to give a true measure of the
joint temperature.
(c) In case of the materials made to the foreign codes or standards are accepted
under clause (a) of sub-regulation (2) of regulation 3, the method of heat treatment
shall conform to that specified in the codes or standards.
(4) Such Butt-welded joints conform to Fig. 7/10.
266. Tests on completed welds on pipelines.─ (1) For tests on completed welds on
pipelines, pipelines shall be divided into followingtwo classes, namely:-
(a) Class-I: Pipelines for service conditions in which any one of the following
limitsare exceeded.
(i) Design temperature 218°C
(ii) Maximum allowable working Pressure 17.6 kg/cm2(g)
(iii) Feed water pressure 24.6 kg/cm2 (g)
(b) Class II: Pipelines for service conditions in which none of the foregoing limits is
exceeded.
(2) For identification of welds,the welders‘ identification mark shall be stamped
without indentation, or stencilled adjacent to each completed weld.
267. Tests for Class I pipelines.─(1) Where the completed pipelines are not tested by
the application of hydraulic pressure, the welds shall be subjected to the following
inspection procedure, namely:-
(a) (i) For piping of over 102 mm bore, all butt-welds shall be subjected to
non-destructive examination by radiographic or other approved methods.
(ii) The entire circumference of the first five welds made by each welder
shall be non-destructively examined and If these are found to be
satisfactory and Competent Person is satisfied with the welding
techniques, methods of control and supervision employed, relaxation in836 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
the extent of non-destructive examination may be considered, but this
relaxation shall in no case permit the non-destructive examination of less
than one-third of the circumference of each of remaining welds made by
the welder concerned.
(b) For piping of102 mm bore and under, but not less than 38 mmbore, five
percent of the butt-welds made by each welder with a minimum of two
welds per welder, selected at random shall be subjected to non-
destructive examination by either radiographic or other approved methods
or may be cut out for visual examination and bend tests.
(c) For piping of less than 38 mm bore, special tests are not normally required
but two percent of the welds by each welder on a pipeline may be cut out
from the pipe-line for visual examination and bend tests.
(2) Where the completed pipelines are tested by the application of hydraulic
pressure, the welds shall be subjected to the following inspection procedure,
namely:-
(a) For piping ofover 102 mm bore, ten percent of the welds made by each
welder on a pipeline with a minimum of two welds per welder, selected at
random, shall be subjected to non-destructive examination by
radiographic or other approved methods.
(b) For piping of 102 mm bore and under, but not less than 38 mm bore, two
per cent of the welds made but each welder on a pipeline with a minimum
of one weld per welder, selected at random, shall be subjected to non-
destructive examination by radiographic or other approved methods or
may be cut out for visual examination and bend tests.
(c) For piping of less than 38 mm bore, special tests are not normally
required,but two percent of the welds by each welder on a pipeline may be
cut from the pipeline for visual examination and bend tests.
268. Tests for Class II pipelines.─(1)All pipelines under this classification shall
be subjected to hydraulic test on completion of erection.
(2) (a) On completion of the first ten production welds made by each welder, one
of the welds shall be cut out for test purposes or alternatively, the welder
shall prepare a test specimen made up of two similar lengths of piping
welded in a position as closely representative of a selected production weld
as is practicable. (b) The test specimen shall be subjected to visual
examination and bend tests.
(3) Two percent of the remainder of the welds made by each welder shall be
selected at random and cut out for test purpose, or, alternatively the welders
shall prepare a test specimen made up of two similar lengths of piping
welded in a position as closely representative of a selected production weld
as far as practicable and the test specimen shall be subjected to visual
examination and bend tests.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 837
(4) Notwithstanding anything contained in sub-regulations (2) and (3), the bend
tests shall be dispensed with, in case the welds have been non-destructively
tested in the following manner:
(a) For piping of over 102 mm bore, five per cent of the welds made by each
welder on a pipeline with a minimum of two welds per welder, selected at
random shall be subjected to a non-destructive examination by
radiographic or other approved methods.
(b) For piping of102 mm bore and under, one per cent of the welds made
by each welder on a pipeline with a minimum of one weld per welder,
selected at random shall be subjected to non-destructive examination
by radiographic or other approved technique.
269. Re-tests.─ (1) If any test specimen is unsatisfactory, two further weld specimen for
re-test shall be selected from the production welds and subjected to tests.
(2) In the events of failure of any of the re-test specimens, the production welds
carried out by this welder subsequent to the previous tests shall be subject of special
consideration.
270. Socket weld joints.─ (1) Socket weld joints may be used with carbon and low alloy
steel pipes not exceeding 60.3 mm. outside diameter.
(2) Such welds shall not be used where fatigue, severe erosion or severe corrosion is
expected to occur.
(3) The maximum allowable working pressure of the socket weld fittings shall be
determined in accordance with equation (7/1) (regulation 256).
(4) The thickness of the socket weld fittings shall not be less than 1¼ times the
nominal thickness of pipeandthe material shall be compatible with the associated
piping.
271. Butt welded joints.─ (1) Butt welded joints as applicable shall be subjected to
non-destructive examination by radiographic, radioscopy or other approved methods
such as ultrasonic testing including phased array ultrasonic testing, magnetic particle
inspection or liquid dye penetrant inspection.
(2) When radioscopic examination is to be performed in lieu of radiography on
welded components, the following requirements shall be met:-
(a) A written procedure shall be submitted for approval to the Inspecting Authority which
shall contain the following:-
(i) material and the thickness range;
(ii) equipment qualifications;
(iii) test object scan plan;
(iv) radioscopic parameters;
(v) image processing parameters;
(vi) image display parameters;
(vii) image archiving requirements;838 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(viii) accept-reject criteria (Code reference);
(ix) performance evaluation;
(x) Operator identification.
(b) The system shall be aided with an image processor to enhance the quality of the
radioscopic images and system performance quality shall exhibit-
(i) a thin section contrast sensitivity of 3%;
(ii) a thick section contrast sensitivity of 2%;
(iii) a spatial resolution of 3 line pairs per mm;.
(iv) IQI sensitivity - 2% of the joint thickness when wire IQI's are to be used, the
wire diameter axis shall be oriented along the axis of the least sensitivity of
the system.
(c) Radioscopes are to be properly marked to co-relate with particular part of joint
represented.
(d) The radioscopic examination data shall be recorded and stored on videotape,
magnetic disk or optical disk or any other electronic storage device at the maker's
plant for a sufficient period after the date of radioscopic examination as specified by
the Inspecting Authority, Efficient radioscopic examination record recall shall be
made available at any time over the record retention period and shall be traceable
to the test objects.
(e) When repair has been performed as a result of radioscopic examination, the
repaired areas shall be re-examined using the same radioscopic technique to
evaluate the effectiveness of the repair.
(f) To aid in proper interpretation of the radioscopic examination data, the details of
the technique used shall accompany the data. As a minimum, the information shall
include the approved procedure requirements and system performance test data
PART-IV
STEAM-PIPE FITTINGS AND CONNECTIONS
272. Wrought Bends.─The minimum wall thickness at any point on the pipe bend shall be
determined according to either of the following methods, namely :-
(a) (i)The minimum wall thickness at any point in the finished bend shall not be less than
required by equation (7/2) or (7/4) given in regulation 256.
(ii) The bend thinning allowance shall be selected based on the manufacturing
process to ensure the minimum thickness requirements after bending.
(iii) The bend thinning allowance thus selected is to be provided on all parts of the
cross section of the pipe circumference without any detrimental effects on the final
product.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 839
(b) The minimum required thickness t of a bend, after bending, in its finished form,
m
shall be determined in accordance with equation (i) or (ii), namely:-
t = P x D
m Wh u r m r ‘ ’ h
+ C [equation (i)]
basis for calculation
2 x (f x e / I) + P
t m = P x d Wh I r m r ‘ ’ h
+ C [equation (ii)]
basis forcalculation
2 x (f x e/I) - P
where, t = minimum wall thickness of a bend in mm,
m
P = maximum allowable working pressure in kg/cm²(g),
D = outside diameter of pipe in mm,
d = inside diameter of pipe in mm,
f = allowable stress as provided under regulation 170 in kg/cm²,
e = efficiency factor,
= 1.0 for seamless and for electric resistance welded steel pipes
and for electric fusion welded steel pipes complying with the
requirements of Chapter-2 in which the weld is fully
radiographed or ultrasonically tested,
= 0.95 for electric fusion welded steel pipes complying with the
requirements of Chapter-2,
= 0.90 for welded steel pipes for values of t (minimum thickness
of pipe) up to and including 22 mm,
= 0.85 for welded steel pipes for values of t ( minimum thickness
of pipe) over 22 mm and up to and including 29 mm,
= 0.80 for welded steel pipes for values of t (minimum thickness
of pipe) over 29 mm,
C = 0.75 mm.
I = [4x (R/D) - 1] {at the intrados (inside of bend)},
[4x (R/D) - 2]
= [4x (R/D) +1] {at the extrados (outside of bend)},
[4x (R/D) +2]
= 1.0 {at the side wall of the bend centre line},
Where, R = Bend radius of pipe bend in mm (see figure below),
D= outsidediameter of pipe
Thickness variations from the intrados to the extrados and at the ends of the bend
shall be gradual and the minimum thickness requirements calculated above should
be met at the extrados, intrados and bend centre line of the finished bend (see
figure below).840 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
The minimum thickness at the ends of the bends shall not be less than the
requirements of equation (7/2) or (7/4) given in regulation 256 and the bend thinning
allowance shall be selected based on the manufacturing process to ensure the
minimum thickness requirements after bending.
Fig. 7/1
273. Butt welding fitting.─The butt- welding fittings shall conform to the dimension and
tolerances given in the figure and table given below:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 841
Fig. 7/2: Steel Butt Welding Fittings – Regulation 273
PART-V
274.Steel butt Welded fittings.─ (1) (a) Branches, bosses and drain pockets welded to the
pipes shall conform to the requirements of regulations 148 to 152.
(b) Branches shall not be welded to any main at an angle of less than 60°.
(2) (a) If the thickness of the main or branches of a single or multiple branch piece is less
than given by the Equation(7/6),external reinforcement shall be provided.
(b) Such reinforcement may take the form of multiple radial plates of 'horse shoe'
form or the form of collars or other reinforcement, approved by the Inspecting
Authority or Chief Inspector as the case may be, applied to or around the junction
between the branch and the main.842 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) (a)Thickness where no external reinforcement is provided; where more than one
branch is attached to a pipe, the opening of each branch shall be projected
perpendicularly on the axis of the main and the distance between each pair of these
projection measured. If the distance so measured between two branches is less than
the sum of their bores, the two branches are deemed to affect each other; if this
distance is equal to or greater than the sum of their bores, the two branches are
deemed not to affect each other and in calculating the reinforcement required, each
branch is to be considered in turn together with all the branches by which it is
affected.
(b) In case abranch not affected by any other branch,where no external reinforcement is
to be applied to a branch piece the thickness of the branch shall be determined from
Equation (7/6).
PD
t ---------------- + C Equation (7/6)
m =
(2 SE + P) X
Where, tm = nominal thickness of the branch less the permissible negative
tolerance,
P = Maximum allowable working pressure,
S = Maximum permissible stress values available in the governing
codes of the country of the material to which it belongs,
E = Efficiency factor given in regulation256.
X = 1 - B (1 - 0.7 sin y) Equation (7/7)
B = ratio of bore of branch to bore of main
y = angle between branch and main in degrees
D= outside Diameter
C = 0.75 mm[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 843
The values of t derived from Equation(7/6) is the minimum thickness and
m
further provision shall be made for any minus tolerance.
No reinforcement is required if –
Y
B is less than -----------
Y + 90 Equation (7/8)
(c) In case a branch affected by one or more other branches (see Fig. 7/6), determine
the 'X' values for each branch alone from equation (7/7). Let 'X' be the value for the
branch under consideration and X , X , the value for the other branches.
a b
Then X = 1 - C (1 - X )
1 a
X = 1 - C (1 - X ) Equation(7/9)
2 b
Where, C is a factor the value of which is to be taken from Table 7/6.
Table 7/6
Serial No. L
----------- C
d + d
1 2
(1) (2) (3)
1. 1 or greater 0
2. 0.9 0.10
3. 0.8 0.34
4. 0.7 0.66
5. 0.6 0.80
6. 0.5 0.90
7. 0.4 0.94
8. 0.3 0.97
9. 0.2 0.98
10. 0.1 0.99
11. 0.0 1
(L = distance between projections of bores, d and d )
1 2
Intermediate values by linear interpolation:
It is to be specially noted that a branch may form part of two distinct, multiple
branches, when its thickness shall be the greater of the thickness calculated
for it as a component of each multiple branch.
The thickness of each branch which is a component of a multiple branch shall
be determined from Equation (7/10). Equation (7/6) shall not apply:844 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Pd 1
* t = ----------------- x ----------- + C Equation (7/10)
m
2 (Se + P) X X . X
1 2
Where C = 0.75 mm.
*SHAPE OF PROFILE - Unless the weld is dressed flush, there shall be external weld
reinforcement, preferably within the limits recommended in Table 7/7 below and this reinforcement
shall be substantially symmetrical about the centre line of the joint and the shape of the reinforcement
may vary according to the type of electrode or welding technique used and the welding position, but
shell in all cases be of smooth contour, the profile running out smoothly into the pipe on each side
without notching or reduction of thickness of the pipe at the edges of the weld.
Table 7/7: Amount of weld Reinforcement
Serial No. Pipe thickness Recommended limits
Over Upto and including Minimum Maximum
mm. mm. mm. mm.
(1) (2) (3) (4) (5)
1. - 6 1.6 5
2. 6 mm 13 1.6 5
3. 13 mm - 1.6 6
(d) Formains (see Figs. 7/6, 7/7, 7/8 and 7/9),(i) the thickness of main carrying a single
or a multiple branch shall be determined as for the single branch or one component
of the multiple branch except that the symbols ‗D‘ and ‗E‘ shall apply to the main.
(ii) The thickness of a main carrying more than one branch, single or multiple,
shall be the greatest of the thickness of the main calculated in connection with
each branch separately.
(iii) The additional thickness of a main for branch reinforcement shall extend over
the length covered by the branch and beyond it for a distance not less than the
bore of the branch on each side.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 845
Fig. 7/3: Steel Butt Welding Reducers846 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
*Required O.D. to be specified.
Notes:
1. d = Outside diameter of the run pipe and branch in case of equal tee.
2. d = Outside diameter of the branch in case of unequal tee.
1
3. L = Distance of centre to end of run.
4. L = Distance of centre to end of branch.
1
Fig.7/4: Steel Butt Welding Tees[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 847
Notes:
1. Caps are to be semi-ellipsoidal shape and are to have a length of straight to make the overall
length as specified in columns 3 and 5. The height of the semi-ellipsoidal portion, measures
externally, is to be not less than one-quarter of the internal diameter of the cap.
2. Lengths E apply to caps of wall thicknesses not exceeding those given in Col.4.
3. Lengths E, apply to caps of wall thicknesses greater than those given in Col.4.
4. d = Outside diameter in mm.
E or E = overall length.
1
Fig. 7/5848 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 7/10 – Welding Neck Flange
Fig. 7/6: Typical Branch Pieces
Fig. 7/11: Plain Vee for Use with
Backing Ring
Fig. 7/7: Typical Branch Pieces
[Pipes Over 13 mm Thick]
Fig. 7/8: Typical Branch Pieces
Fig. 7/12: Double Angle Vee for Use
with Backing Ring[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 849
[Pipes over 13 mm Thick]
Fig. 7/13: Normal preparation U-
Fig. 7/9: Typical Branch Pieces
Groove for use with backing ring
All dimensions are in mm.
[Pipes over 13 mm Thick]
Fig. 7/18: Normal Preparation Double Angle Vee
Fig. 7/14: Permissible Alternative Preparation
for Use with Oxy-Acetylene Base Run
for Vertical or Nearly Vertical Pipe U-Groove
for Use with Backing Ring
[For Pipes over 8 mm Thick] Permissible Alternative Preparation for Vertical or
Nearly Vertical Pipe
Fig. 7/15: Preparation of Groove for Use with
Taper Backing Ring and Double Root Run Fig. 7/19: Double Angle Vee for Use with Oxy-
Acetylene Base Run850 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
For Pipes 13 mm and Thinner
Normal Preparation
Fig. 7/16: Groove for Use with Recessed
Backing Ring
Fig. 7/20: U-Groove for Use With Oxy-Acetylene
Base Run
Approx. Flush with Bore for Pipes Thicker than 13
mm.
Fig. 7/17: Groove for User with Recessed Permissible Alternative Preparation for Vertical or
Backing Ring Nearly Vertical Pipe
Fig. 7/21: U-Groove for Use With Oxy-Acetylene
Base Run
All dimensions are in mm.
For Use with Special Welding Technique
[Pipes 10 to 16 mm Thick inclusive]
Fig. 7/24: Plain Vee for Use Without
Fig. 7/22: Plain Vee for Use With Oxy- Backing Ring
Acetylene Base Run
Normal Preparation[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 851
Fig. 7/23: Plain Vee for Use Without
Backing Ring Fig. 7/25: Single U for Use Without
Backing Ring
All dimensions are in mm.
Fig. 7/26
Fig. 7/27852 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
All dimensions are in mm.
Fig. 7/28
Fig. 7/30[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 853
Fig. 7/29
Fig. 7/31
All dimensions are in mm.
Fig. 7/32: For Clearance Between Flange Bore & O.D. of Pipe [See regulation263(2)]854 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 7/33: For Clearance Between Flange DIMENSION X MIN. MM. 28 MM
Bore & O.D. of Pipe [see regulation263(2)] (NOMINAL PIPE WALL THICKNESS)
OR THICKNESS OF FLANGE BUB,
WHICHEVER IS SMALLER.
Fig. 7/34: Socket Welded Flange
All dimensions are in mm.
275. Blow-down pipes .─ (1) Blow-down pipes which can be subjected to full boiler
pressure shall be considered as saturated steam-pipes at that pressure.
(2) Blow-down pipes which cannot be subjected to full boiler pressure shall be
considered as saturated steam-pipes at half the design pressure of the boiler.
276. Valves chests .─ (1) Chests of stop-valves, isolating valves, reducing valves, steam
traps, etc., forming parts of wrought steel main steam piping when for use with saturated
steam up to a gauge pressure of 11kg/cm2 (g)or a temperature of 204°C may be made of
cast iron, cast steel or wrought steel in accordance with the requirements of regulation 191.
(2) When superheated steam is used above 204°C or when pressures are above
11kg/cm2 gauge, such chests shall be made of cast or wrought steel or other approved
material in accordance with the requirements of regulation 191.
PART-VI
277. Materials in the construction of steam receivers, separators, catch waters ,
accumulators and similar vessels.─(1)Material for plates, bars and sections used in the
construction of steam receivers, separators, catch waters, accumulators and similar Vessels
shall comply in all respects with the requirements of relevant regulations of Chapters-2 and
4, depending upon the mode of construction.
(2) Branches, bosses and drain pockets may be solid forged, fabricated by fusion
welding, machined from solid bars or made from tubes.
(3) Materials for flanges shall comply with the appropriate provisions of regulation
258.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 855
(4) Forgings shall comply with the requirements of regulations58 to 62
(5) Steel castings for shells or pressure parts of shell shall comply with regulations
51 to 57.
278. Construction and workmanship.─(1)Shell ends formed separately from the shell may
be dished or flat or the ends of the shell may be forged down and closed by manhole doors
or by plugs or branches welded in.
(2) (a) (i) Each dished end shall be made from one rolled plate.
(ii) If this is impracticable, owing to the large diameter, the dished end plate may
be made from two plates fusion butt welded together and in such cases, the line
of weld shall be parallel to the horizontal axis of the vessels and the weld shall be
radiographed after forming.
(iii) The shape of dished end shall conform to the requirements of regulation 174.
(iv) Dishing end peripheral flanging shall be done by machine.
(v) Cold flanging shall not be adopted.
(vi) All plates which have been dished, flanged or locally heated shall afterwards
be efficiently heat treated for the purpose of relieving internal stresses, unless
during the last stage of manufacture, they have been uniformly heated throughout
to a suitable temperature.
(vii) Care shall be taken to see that the flanges are cylindrical, of good surface
and free from local irregularities.
(b) Where flats are pressed in dished ends for the attachment of connections,
they shall be formed with an ample radius at the junctions of the flat and curved
surfaces and shall be free from sharp corners and tool marks.
(c) Dished ends shall be attached to the cylindrical part of the shell by one of the
following methods:
(i) Welding with butt Joints of the Single or Double U or V Type;where the
internal diameter of the shell is 610 mm or over, the joints shall in all cases,
be welded from both sides of the plate.
(ii) Where the internal diameter of the shell is less than 610 mm the joints may
be welded from one side only, when efficient welding from inside is
considered impracticable.
(iii) In the construction of unfired boilers when the dished ends do not form part of
the heating surface, cold spun dished ends conforming to IS: 2825 may be
used.
(3) (a) Flat ends shall be of forged steel or plate steel and shall be welded to the
cylindrical part of the shell or bolted to flanges which shall be attached to the
cylindrical part of the shell in accordance with regulation 263.856 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) The attachment of flat ends shall be by one of the methods shown in figure7/35,
7/36, 7/37 and 7/38 of this chapter.
(c) When ends are attached as shown in figure7/38, welding shall be from both side
of the shell plate whereverpracticable andwhere welding is done from one side
only, care shall be taken to ensure full penetration using backing strips.
Fig. 7/35
Fig. 7/37
Fig. 7/36
Fig. 7/38
All dimensions are in mm.
Fig. 7/39[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 857
279. Access to Shells.─ (1) At least one manhole shall be provided to allow access for
thorough cleaning and inspection, except that where the shell is too small to permit
entry, cleaning and inspection openings of sufficient size and number shall be
provided. (2) When there is an elliptical opening in the cylindrical part of the shell, the
minor axis shell, wherever practicable be parallel to the longitudinal axis of the shell.
280.Compensating rings to openings and doors.─The material, construction and
workmanship of compensating rings and doors shall comply with the relevant
provisions of Chapters 2, 3 and 12.
281. Branches and other connections.─(1) (a) Connections to shell shall be made by
means of branches, pressed plate saddles, forged pads or bosses or where the
thickness of the shell is sufficient to allow suitable surface to be obtained, connections
may be attached directly to the shell, provided that the minimum thickness at the hole in
the shell is not less than the thickness required for the maximum allowable working
pressure and temperature considering the shell as being unpierced and that the diameter
of the hole does not exceed the maximum diameter of an uncompensated hole as
defined in regulation 141 and 179.
(b) Studs for securing such connections shall have a full thread holding in the shell for a
length of at least one diameter and the stud holes shall not penetrate the whole
thickness of the shell.
(c) All holes for bolts and studs in branches, saddles and forged pads shall be drilled.
(d) Where such connections are secured by welding alone, a minimum of two runs of
metal shall be deposited at each weld, except for seal welds.
(e) Each run of weld metal shall be thoroughly cleaned and free from slag before the
next run is deposited.
(f) The final finish of the welds shall be such that change of section from shell to branch
is gradual and free from sharp notches.
(g) Where the diameter of the shell is 610 mm and over, welding shall be from both
sides of the plate.
(h) Where the internal diameter of the shell is less than 610 mm, external and internal
welds shall be applied unless it is considered that efficient welding from both sides is
impracticable.
(i) This does not apply to the methods of attachment shown in Fig.7/40 and 7/41 in which
the welding shall always be from both sides.858 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 7/40
Fig. 7/43
WELDING PROCEDURE FOR TYPES
SHOWN IN FIG. 7/42 AND 7/ 43 TO BE AS
FOR DOUBLE WELDED BUTT JOINT. OUTER
WELD TO BE MADE FIRST. BACK OF OUTER
WELD TO BE CHIPPED OUT. BEFORE
COMMENCEMENT OF INNER WELD BUTT
DEEP PENETRATION WELDING MAY BE
USED SUBJECT TO PROOF OF REQUISITE
PENETRATION BEING PRODUCED BY THE
MANUFACTURER WHERE CALLED FOR BY
THE INSPECTING AUTHORITY.
NOTE: THE ABOVE ARE NOT RECOMMENDED
BRANCH LENGTHS AND BRANCHES SHOULD BE AS
SHORT AS POSSIBLE.
Fig. 7/41[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 859
All dimensions are in mm.
Fig. 7/44
Fig. 7/45
Fig. 7/42860 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
THE TYPE SHOWN IN FIG. 7/49 IS NOT
Fig. 7/46 PERMITTED WHERE THE SHELL
THICKNESS EXCEEDS 25.4 MM
Fig. 7/49
THE TYPES SHOWN IN FIG. 7/47 ARE ONLY
PERMITTED WHERE THE ELECTRODES AND
TECHNIQUE TO BE USED HAVE BEEN SHOWN, BY
SEPARATELY PREPARED TEST SPECIMENS, TO GIVE
FULL PENETRATION WITH SOUND WELD METAL AT
THE ROOT OF THE GROOVES. THEY ARE NOT
Fig. 7/50
PERMITTED WHERE THE BORE OF THE BRANCH
EXCEEDS 127 MM.
Fig. 7/47
All dimensions are in mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 861
Fig. 7/51
THE TYPE SHOWN IN FIG. 7/48 IS NOT PERMITTED
WHERE THE INSIDE OF THE VESSEL IS ACCESSIBLE
FOR WLEDING FIG. IS PREFERRED WHERE THE
INSIDE OF THE BRANCH IS ACCESSIBLE FOR
WELDING, WHERE IT JOINS THE SHELL.
Fig. 7/48
Fig. 7/52
Fig. 7/56862 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
WELDING PROCEDURE FOR TYPES SHOWN IN FIGS. 7/52
AND 7/53 TO BE AS FOR DOUBLE WELDED BUTT JOINT.
OUTER WELD TO BE MADE, FIRST BACK OF OUTER WELD
TO BE CHIPPED OUT BEFORE COMMENCEMENT OF INNER
WELD. BUT DEEP PENETRATION WELDING MAY BE USED
SUBJECT TO PROOF OF REQUISITE PENETRATION BEING
PRODUCED BY THE MANUFACTURER WHERE CALLED FOR
BY THE INSPECTING AUTHORITY.
Fig. 7/57
Fig. 7/53
All dimensions are in mm.
Fig. 7/58
Fig. 7/54
Fig. 7/55 Fig. 7/59[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 863
THE TYPE SHOWN IN FIG. 7/60 IS NOT PERMITTED
WHERE THE INSIDE OF THE VESSEL IS ACCESSIBLE
FOR WELDING. FIG. 7/61 IS PREFERRED WHERE THE
INSIDE OF THE BRANCH IS ACCESSIBLE FOR
WELDING WHERE IT JOIN THE SHELL.
Fig. 7/63
Fig. 7/60
All dimensions are in mm.
THE TYPE SHOWN IN FIG. 7/61 IS NOT PERMITTED Fig. 7/64
WHERE THE SHELL THICKNESS EXCEEDS 25.4 MM.
Fig. 7/61
TAPPED BOSSES EXCEEDING 38.1 MM
STANDARD PIPE SIZE ARE NOT
TYPE SHOWN IN FIG. 7/62 IS NOT PERMITTED WHERE
PERMITTED.
ANY OF THE FOLLOWING LIMITS IS EXCEEDED SHELL
THICKNESS 19 MM MAXIMUM ALLOWABLE WORKING
PRESSURE 7.4 kg/cm2 (g)DESIGN TEMPERATURE
171°C. Fig. 7/62
Fig. 7/65864 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
THE TYPE SHOWN IN FIG. 7/66 IS NOT PERMITTED WHERE
THE INSIDE OF THE SHELL IS ACCESSIBLE FOR WELDING. THE TYPE SHOWN IN FIG. 7/70 IS NOT
PERMITTED WHERE THE SHELL THICKNESS
Fig. 7/66
EXCEEDS 19 MM.
Fig. 7/70
Fig. 7/67
DIMENSION B MAY BE GREATER THAN NOMINAL
BORE OF CONNECTION BUT MUST NOT
EXCEED: PITCH CIRCLE DIAMETER MINUS (STUD
All dimensions are in mm. DIAMETER + 12.7 MM). WELDING PROCEDURE
FOR TYPE SHOWN IN FIG.7/71 TO BE AS FOR
DOUBLE WELDED BUTT JOINT. OUTER WELD TO
BE MAKE FIRST. BACK OF OUTER WELD TO BE
CHIPPED OUT BEFORE COMMENCEMENT OF
INNER WELD. BUT DEEP PENETRATION
WELDING MAY BE USED SUBJECT TO PROOF OF
REQUISITE PENETRATION BEING PRODUCED BY
THE MANUFACTURER WHERE CALLED FOR BY
THE INSPECTING AUTHORITY.
THE TYPE SHOWN IN FIG. 7/68 IS ONLY PERMITTED WHERE
THE INSIDE OF THE SHELL IS NOT ACCESSIBLE FOR Fig. 7/71
WELDING
Fig. 7/68
THE TYPES SHOWN IN FIGS. 7/68 &7/69 ARE NOT
PERMITTED WHERE ANY OF THE FOLLOWING LIMITS IS
EXCEEDED: SHELL THICKNESS 19 MM; MAXIMUM
ALLOWABLE WORKING PRESSURE 10.6 kg/cm2(g);
DESIGN TEMPERATURE 260°C; TAPPED BOSSES
EXCEEDING 38.1 MM STANDARD PIPE SIZES ARE NOT
PERMITTED[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 865
Fig. 7/72
Fig. 7/69: FINAL SEALWELD
THE TYPE SHOWN IN FIG. 7/73 IS NOT
PERMITTED WHERE THE INSIDE OF THE SHELL
IS ACCESSIBLE FOR WELDING
Fig. 7/73
Fig. 7/74
DIMENSION B MAY BE GREATER THAN NOMINAL
BORE OF CONNECTION BUT MUST NOT EXCEED:
DIMENSION ‗B‘ MAY BE GREATER THAN
PITCH CIRCLE DIAMETER MINUS (STUD DIAMETER +
NOMINAL BORE OF CONNECTION BUT
12.7 MM) THE TYPES SHOWN IN FIGS. 7/72, 7/73 AND
MUST NOT EXCEED: PITCH CIRCLE
7/74 ARE NOT PERMITTED WHERE THE SHELL
DIAMETER MINUS (STUD DIAMETER + 12.7
THICKNESS EXCEEDS 19 MM.
MM) THE TYPES SHOWN IN FIGS. 7/75 AND
7/76 ARE NOT PERMITTED WHERE THE
SHELL THICKNESS EXCEEDS 19 MM.
Fig. 7/76
All dimensions are in mm.866 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
THE TYPE SHOWN IN FIG. 7/75 IS NOT PERMITTED WHEN THE INSIDE OF THE SHELL IS
ACCESSIBLE FOR WELDING.
Fig. 7/75
All dimensions are in mm.
(2) (a) Branches of not more than 38 mm nominal bore may be screwed into the shell with a
taper thread and seal welded, provided that the thickness of the shell is sufficient to allow
for a length of thread equal to the diameter of the branch.
(b) Where the thickness of the shell is not sufficient for the purpose, a boss may be
welded on so that the total thickness of the boss and shell is at least equal to the required
length of thread.
(c) Methods of attachment of such bosses are shown in Figs. 7/65 to 7/69.
(3) (a)Branches, pressed plate saddles, forged pads of bossesshall be secured to the shell
by one of the following methods,-
(i) Welding;
(ii) Screwing and Seal Welding.
(b) (i) Methods of attachment secured by welding are shown in Figs. 7/40 to 7/64 of this
chapter.
(ii) Branches may be provided with flanges for ordinary bolted joints. Joints of
special type may also be used.
(iii) Flanges for ordinary bolted joints shall be in accordance with the appropriate
table of Appendix-F and shall be forged solid with the branches or attached in
accordance with regulation 263.
(iv) They shall be machined on the jointing and bolt bearing surfaces.
(c) (i) Where pressed plate saddles are used, they shall be formed to bed closely to the
shell and shall be machined on the face adjoining the connection and machined or
flame cut by machine on the edges.
(ii) The studs for the attachment of the connection, if screwed through the saddle,
shall each be fitted with a nut on the inside.
(iii) Where the stud holes do not penetrate through the saddle, the length of the
screwed portion of the stud in the plate shall be not less than the diameter of the
stud.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 867
(d) The join faces of all pads shall be machined.
(e) (i) The pads shall be sufficiently thick to allow the drilling of stud holes for
connections without the inner surface being pierced.
(ii) The length of the screwed portion of the stud in the pad shall be not less than the
diameter of the stud.
(iii) Method of attachment of pads secured by welding are shown in Fig. 7/70 to 7/76
of this chapter but where pads of the type shown in Fig. 7/70are used, they shall be
formed to bed closely to the shell.
(f) (i) Tapped bosses of not more than 38 mm standard pipe welded to the shell, may
be used for maximum allowable working pressure not exceeding 14 kg/cm2 (g) and
design temperatures not exceeding 343°C.
(ii) Such bosses shall have taper threads.
(iii) Methods of attachment of bosses secured by welding are shown in Fig. 7/65,
7/69 of this chapter
(g) (i) All welded attachments other than flange connections shall be by the metal arc
process and the electrodes used shall comply with the requirements ofregulations 71
to 76.
(ii) Where tack welds are used, they shall be sound and unless cut out, shall be
carefully fused into the main runs.
(h) All parts secured by welding shall be effectively heat treated after completion of all
welding and before hydraulic test.
282.Shell joints .─ (1)Fusion Welded Shellsshall be classified as follows:
(a) Class I – No limit to scantlings.
(b) Class II – When none of the following limits exceeds:–
(i) maximum allowable working pressure- 35 kg/cm2 (g)
(ii) product of maximum allowable working pressure and internal diameter in
centimeters – 3750.
(iii) design temperature – 343°C.
(c) Class III – When none of the following limits exceeds:–
(i) maximum allowable working pressure -7.4 kg/cm2 (g)
(ii) product of maximum allowable working pressure and internal diameter in
centimeters – 940.
(iii) design temperature – 171°C.
(2) Fusion welds, preparation of seams, the method of formation of cylindrical shells
including heat treatment after bending, method of making welded seams, types of
welded joints, test plates and circularity of shells, all shall conform to the
requirements of Chapter -4, except for the following, namely;-
(a) (i) Whenever practicable, seams shall be welded from both sides of the plate.868 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Additional runs of metal shall be deposited at both surfaces of the welded seams to
build up to a thickness 10 per cent greater than thickness of the plate.
(ii) The surfaces of welds wherever carried out on both sides shall be ground smooth
and flush with the respective surfaces of the plates.
(iii) Where the seam is welded from one side only, these provisions shall apply to the
exposed of the surface weld.
(b) Tests for Class I fusion welded seams shall comply with the requirements of the
relevant regulations of Chapter -4.
(c) Tests for Class II fusion welded seams shall comply with the requirements of
those of Chapter-12, except that an additional provision for one micro and macro
examination shall be made.
(d) Tests for Class III fusion welded seams shall comply with the requirements of
Chapter -12.
(e) Class I and Class II shells shall be effectively stress-relieved by heat treatment
when the wall thickness exceeds 20 mm or the carbon content exceeds 0.25% or the
pipes are made of alloy steel.
283. Determination of maximum allowable working pressure.─(1) (a) The maximum
allowable working pressure of shells shall be determined as per the following formula: -
2f E (T – 0.75)
P = ---------------
D + (T – 0.75)
Where,
T is thickness in mm,
D is maximum internal diameter in mm,
P is maximum allowable working pressure in kg/cm2 (g),
f is maximum permissible working stress as prescribed in
regulation170 or 256 whichever is applicable in kg/cm2 at the
working metal temperature,
E is Efficiency factor for fusion welded shells as given in table below,
is 1.00 for seamless shells or shells made from seamless
tubes,
is Efficiency of ligaments between holes or openings in shell
expressed as a fraction.
0.75 is the additive thickness in order to take corrosion into account.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 869
Table 7/8
Serial No. Class Efficiency Factor (E)
(1) (2) (3)
1. I 0.90
2. II 0.75, if welded from both
sides
0.50, if welded from both
sides
3. III 0.45
Table 7/9: Minimum thickness of shells
Serial No. Classification Internal diameter inmm Minimum
thicknessin mm
(1) (2) (3) (4)
1. Fusion welded class I 6.3
2. Fusion welded Class II and Upto and including 610 6.3
Class III,
3. Shells other than fusion Over 610 and up to & 8
welded including 914
4. Shells Over 914 9.5
(b) Where steels are intended for service at temperatures in excess of 371°C, this shall
be so stated and silicon contents shall be not less than 0.10 per cent or alternatively,
the material must pass the ‗Proof test for creep quality of carbon steel plate of boiler
quality‘ as in Appendix-E.
(c) For compensation for openings in shells, where the major axis of diameter of any
hole cut in cylindrical part of the shells is greater than 2½ times the thickness of the
shell plate plus 70 mm, compensation shall be provided.
(d) The sectional area to be compensated measured in the plane parallel to the
longitudinal axis of the shell, which makes this area a maximum, shall be the product
of the length of the opening and the thickness of a seamless shell of similar material
calculated in accordance with Equation (4/2)(regulation 169) for the same conditions
of pressure and temperatures.
(e) Where frames, pads or branches are secured by welding, the compensating area
shall be calculated as per the method given in regulation 141.870 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) (a)The maximum allowable working pressure for dished end plates with ‗pressure on
concave side‘ shall be determined as per regulations 175 to 177.
(b) For manholes formed by welding on pressed frames to dished end plates as in
Fig. 7/77,the value of ―E‖ may be taken as unity when the diametral cross-sectional
area of the compensating frame and or ring is equal to or greater than the diametral
cross-sectional area of the opening in the end plate to be compensated.For ends
which are butt welded to the cylindrical parts of the shell, the thickness of the edge of
the flange for connection to the cylindrical part of the shell shall be not less than that
required for seamless unpierced shell as determined as per Equation (4/2) as
mentioned under regulation 169.
Fig. 7/77: Elliptical Manhole Frame Welded to Dished End Plate
(3) (a)The maximum allowable working pressure for welded flat end plates as
mentioned in Fig. Nos. 7/35, 7//37 and 7/38 of this chapter shall be determined as
per the following formula; -
f T2
P = -------
C d2
Where, T = Minimum thickness of end plate in inches,
d = Internal diameter of shell in inches,
P = Maximum allowable Working pressure in lbs./sq.in.
C = 0.28.
(b) Maximum permissible working stress ―f‖ at working metal temperature as
prescribed in regulation 170.
(c ) Where steels are intended for service at temperatures in excess of 371°C, this
shall be so stated and silicon content shall not be less than 0.10 per cent or
alternatively, the material shall pass the ‗Proof test for creep quality of carbon steel
plates of boiler plate quality‘ as in Appendix-E.
(d) Where flat end plates are bolted to flanges as in Fig. 7/39, the dimensions of the
flanges shall be as given in Appendix-F. The thickness of the end plates shall be
not less than that of the corresponding flanges.
(e) Where the diameter of a hole in the flat end plate exceeds 2½ T + 70 mm,
compensation shall be provided in accordance with regulations 141and 179.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 871
(4) (a)Where branches of saddles are secured to the shell by studs, the minimum
thickness of the flange adjoining the shell shall be as per the Table 7/10 given
below,-
Table 7/10
Serial No. Thickness of shell platein Minimum thickness of flange
mm inmm
(1) (2) (3)
1. 9.5 to 19 13
2. Above 19 to 25 16
3. Above 25 to 51 19
4. Above 51 25
(b) The actual dimensions of the flanges shall be governed by the requirements of
compensation for the opening.
(c) (i) The dimensions of flanges of branches remote from the shell for ordinary bolted
joints and those of bolts of all pads and saddles shall be as per the appropriate table
given in Appendix-F for the maximum allowable working pressure and temperature
corresponding to the maximum allowable working pressure and temperature of the
shell. (ii) The dimensions of the flanges for special joints shall be subject to approval
of the Inspecting Authority or Chief Inspector as the case may be.
(d) The maximum allowable working pressure for the body of the branch shall be
determined by the equation as given in clause (a) of sub-regulation (1) above, subject
to the requirements of compensation for the opening.
(e) (i) Notwithstanding the result obtained from the equation the minimum thickness of
the body of the branches shall be such that in no case does the total stress, resulting
from the combination of the stress due to internal pressure and to all externally
applied loads, exceed the permissible stress corresponding to the design
temperature.
(ii) The method of calculating the total stress shall be subject to the approval of the
Inspecting Authority or Chief Inspector as the case may be. Where the magnitude of
the externally applied loads cannot be determined, the minimum thickness of the
body of the branch shall be as given in the table 7/11 as given below,-
Table 7/11: Minimum thickness of Branches where External Loads are not known
Serial No. Thickness of cylindrical Minimum body
Nominal bore of branch in mm
part of shell in mm thickness
(1) (2) (3) (4)
1. Up to and including 63.5 19 and above 9.5
For thinner shells, not
2. Over 63.5 up to and including less than one half the
22 and above 11
108 thickness of the
3. Over 108 up to and including 25 and above 13 cylindrical part of the872 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
203 shell. Subject to
approval of Inspecting
4. Over 203 up to and including
32 and above 16 Authority.
254
5. Over 254 above 32
284.Inspection during construction.─ All parts of steam receivers, separators, catch
waters and similar vessels shall be inspected at all appropriate stages of construction
detailed in Appendix-Aof theseregulations.
285. Steel screwed and socketed joints and mountings of steel.─(1)Steel couplings or
sockets may be used on pipes within the limits given in Table-7/12below:-
Table 7/12
Serial No. Maximum
Maximum
Allowable
permissible
Nominal bore Working
temperature
Pressure
kg/cm2 (g) °C
(1) (2) (3) (4)
1. Upto and including 25 mm 12.25 260
Over 25 mm upto and including 38 mm
10.5 260
2. Over 38 mm upto and including 8.75 260
75 mm
7 260
3. Over 76 mm upto and including 8.5 177
102mm
4. Over 102 mm upto and including 127 7 171
mm
(2) Screwed joints shall be permitted at temperatures exceeding 260°C and size or
pressure limits in excess of those given inthe Table 7/12 of this regulationprovided that the
following conditions are satisfied, namely:-
(a) all threads are tapered unless pressure tightness depends on a seal weld or a
seating surface other than the threads and experience or test demonstrates the
suitability of the joint.
(b) pressure or temperature rating in appropriate component standard like BS, ASME,
DIN or calculated as per relevant regulation is not exceeded.
(c) minimum specified tensile strength of screwed pipes is greater than 30.5 kg/mm2.
(d) the minimum thickness of screwed pipes is not to be less than that given in Table
7/13 of this regulation.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 873
(e) the design temperature does not exceed 495°C.
(f) the pressure limits given in Table 7/14 of this regulation are not exceeded.
(3) Screwed joints are permitted for temperatures in excess of 495°C and pressure in
excess of those given in Table 7/14 of this regulationfor instrument insertion and
tapping and for plug for access opening for radiographic inspection provided
following conditions are satisfied:-
(a) They do not exceed 50 mm nominal bore size or one quarter of nominal pipe size,
whichever is the smaller.
(b) The minimum thread engagement is not less than –
(i) 6 for up to and including 20 mm nominal bore;
(ii) 7 for over 20 mm up to and including 40 mm nominal bore; and
(iii) 8 for 40 mm up to and including 50 mm nominal bore.
(c) The connection is seal-welded.
(d) The design of instrument insertion withstands the fluid characteristics, fluid flow and
any vibrations.
(4) Screwed joints are permitted for pressure in excess of those given in Table 7/14 up
to 345 bar for dead end instrument lines at the outlet end and downstream of shut off
valves and instruments, control apparatus or discharge of a sample cooler provided
that the nominal bore size of the pipe does not exceed 12 mm.
Table 7/13: MINIMUM THICKNESS OF SCREWED PIPES
Serial No. Minimum thickness
Nominal
Pipe size (mm) 17.5 kg/cm2(g) or less Over 17.5 kg/cm2 (g)
for steam 7 kg/cm2 (g) for steam Over 7
and less for water over kg/cm2 (g) for water
105°C (mm) over 105°C (mm)
(1) (2) (3) (4)
1. 8 2.24 3.02
2. 10 2.31 3.20
3. 15 2.77 3.75
4. 20 2.87 3.91
5. 25 3.38 4.55
6. 32 3.56 4.85
7. 40 3.68 5.08874 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
8. 50 3.91 5.54
9. 65 5.16 7.01
10. 80 5.49 7.62
Table 7/14: MAXIMUM ALLOWABLE WORKING PRESSURE FOR SCREWED PIPES
Serial No. Nominal pipe size (mm) Maximum allowable working pressure (kg/cm2 (g))
(1) (2) (3)
1. Over 50 up to and including 80 28
2. Over 25 up to and including 50 42
3. Over 20 up to and including 25 84.5
4. Up to and including 20 105.5
286. Bronze screwed and socketed joints and mountings and fittings of bronze.─
(1) Mountings and fittings of bronze up to 76 mm diameter may be attached directly to steel
pipes by screwing, when the pressures and temperatures do not exceed 8.5 kg/cm2 (g) and
225°C respectively; where tapered threads are employed, such joints may be used for
pressures not exceeding 17.6 kg/cm2 (g).
(2) Bronze fittings above 76 mm diameter shall be of flanged construction.
287. Reducing valve.─Where a reducing valve is installed in a pipe line, the pipe line and
accessories on the low pressure side of the reducing valve shall be protected by a suitable
safety valve or valves so adjusted as to permit the steam to escape as soon as the
maximum allowable working pressure is exceeded or by a suitable appliance for cutting off
automatically the supply of steam as soon as the maximum allowable working pressure is
exceeded.
288.Flexibility.─(1)The pipe shall be arranged so that the system is sufficiently flexible to
absorb the whole of their expansion and the imposed movement of the connected equipment
without the actual expansion stress (SE) exceeding the allowable stress range (SA)
determined as per the following equation,─
SA = F (1.25 SC + 0.25 SH)Equation (7/11)
Where, SC = Basic material allowable stress at the minimum (cold) temperature,
SH = Basic material allowable stress at maximum (hot) temperature,
SE = Actual calculated expansion stress obtained from the stress analysis,[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 875
F = Stress range reduction factors of cyclic conditions for total number―N‖
of full temperature cycles over the total number of years during which
the system is expected to be in operation as in table given below:
Table 7/15: Stress range reduction factors:
Serial No. N F
1. 7,000 and less 1.0
2. 7,000 - 14,000 0.9
3. 14,000 - 22,000 0.8
4. 22,000 - 45,000 0.7
5. 45,000 - 100,000 0.6
6. 100,000 and above 0.5
Notes: 1. Value of SC and SH shall be guaranteed by the manufacturer of steel from which pipes are
madeand furnished to the pipe makers / Inspecting Authority until such time such values of SC and SH
are incorporated in the regulations.
2. In case of imported pipes conforming to a recognized foreign standard or code the values of SC
and SH may be taken from the table of allowance stress as given in that code or the value may be
determined on the basis given in that code.
3. The sum of the longitudinal stress due to pressure, weight and other sustained load including
bending stresses caused by external loads shall not exceed the allowable stress in the hot
conditions (SH), Where the sum of these stress is less than SH, the difference between SH and
this sum may be added to the term 0.25 SH, in the above formula for determining the allowable
stress range SA.
4. Calculation of the expansion stress, SE shall be based on modulus of elasticity at room
temperature.
(2) Where practicable, the requisite flexibility shall be provided in the layout of the pipes
without having recourse to special expansion bends or expansion joint except for the
safety valves discharge piping. Where lack of space or other considerations prohibits
the use of this method, expansion fittings like expansion joints or the bellows type of
corrugated pipes may be used provided that the limitations imposed by maximum
shall be given to the design of anchors, guides and ties to ensure that they
adequately protect the expansion fitting and accommodate the additional loads due
to pressure.
(3) Notwithstanding anything in sub-regulation(1)of this regulation, the complete analysis
of the piping system may be waived, if the system meets any of the criteria given
below,-
(a) the piping system duplicates a successfully operating installation or replaces a
system with a satisfactory service record.
(b) the piping system can be adjudged adequately by comparison with previously
analysed system.876 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(c) the piping system is of uniform size with not more than two anchors and no
intermediate restraints and satisfied the following :-
DY
--------- = 208
(L-U) 2
Where, D = Nominal pipe size in mm.
Y = Resultant of movements to be absorbed by pipelines in mm,
L = Developed length of line axis in meters,
U = Anchor distance (length of straight line joining anchors) in
meters.
Notes: 1. If the system is not meeting the above criteria or where reasonable doubt exist as in the
adequate flexibility of the system, shall be analysed on the basis given in sub-regulation(1) of
this regulation by simplified, approximate or comprehensive methods of analysis that are
appropriate for the specific case.
2. Approximate or simplified method may be applied only if they are used for the range or
configurations for which their adequate accuracy has been demonstrated.
3. Data for thermal expansion, modulus of elasticity, poison‘s ratio, flexibility factors and stress
intensity factors may be taken from any code or specification.
4. Nominal diameter and nominal thickness may be used in the calculation of expansion stress.
289. Pipe work supports.─ (1) All pipe work shall be adequately supported in order to
permit free movement for expansion and contraction, and the amount of such movement
shall be proportioned throughout the whole of any main by the provision of anchors at
suitable points.
(2) Where pipes may be subject to vertical movement, spring supports designed to carry the
load under all conditions shall be provided.
(3) Points of supports shall, as far as practicable, be arranged adjacent to the pipe joints.
(4) Slings are in general preferable to roller supports and the latter shall be used only where
necessary.
(5) All pipe supports shall as far as practicable, be of mild steel and pipe anchors either of
mild steel or cast steel.
290. Drainage.─ (1) (a) In the case of steam mains, attention shall be paid to the adequate
provision of drainage points in the form of drain pockets.
(b) Drainage points connected to stream-traps, shall be provided wherever water can collect
under working conditions.
(c) Hand drains shall be provided at all points at which water can collect in any portion of the
steam main, by valve leakage or other means, when shut down, or when warning up prior to
use.
(2) Wherever practicable, a suitable gradient shall be provided in the pipe work to ensure
the passage of condensed water in the direction of flow of steam towards the drainage
points.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 877
(3) It is recommended that a bypass shall be fitted at each steam trap.
(4) Where the volume of water deposited is likely to be of serious proportions, separator
shall be installed.
(5) Each separator shall be furnished with a steam trap which shall be connected to it by
means of a three-way cock, one end of which is connected to a manually operated
drain.
291.Freedom from rust and other foreign matter.─All pipes, valves and fittings shall be
thoroughly cleaned as far as possible of rust and other foreign matter before erection and
pipe lines shall be blown through with steam or air before being put into service.
292. Test Pressures.─(1) Each completed pipe and fitting shall be tested by hydraulic
pressure as per Chapter-2.
(2) (a) Pipes and fittings with flanges for steam pressures exceeding 7 kg/cm2 (g) shall be
tested with blank flanges bolted or clamped on.
(b) All other pipes, if straight, may be tested between the heads of an ordinary hydraulic
pipes testing machine.
(3) (a) The piping system shall, after erection, be subjected to a hydrostatic test pressure.
(b) The hydrostatic test pressure at any point in the piping system shall not be less than
1.5 times the design pressure but shall not exceed the maximum allowable test pressure of
any non-isolated components such as vessels, pumps or valves.
(c) At no time during the hydrostatic tests, any part of the piping system shallbe subjected
to a stress greater than 90 per cent of its yield strength (0.2 per cent off set) at test
temperature.
Notwithstanding anything contained in this sub-section, for boiler external piping and
non-boiler external piping which are open to atmosphere such as vent and drain pipes, the
hydraulic test for the portions of such pipes located beyond the last isolation valve may be
dispensed with provided the weld joints in the pipe under reference are tested 100% by
approved non-destructive examination and found satisfactory.
(4) Special arrangement shall be made, according to circumstances, for testing bends and
other fittings which are not flanged.
(5) Hydraulic testing of butt welded and socket welded joints shall be conducted either at
makers work or at user‘s premises on completion of fabrication of pipes by the Inspecting
Authority.
(6) (a) Hydrostatic testing of fabricated pipes having attachments of flanges, fittings, butt joints,
branch joints and weldolets shall be done at manufacturer‘s works or alternatively at site at
1.5 times the maximum allowable working pressure.
(b) Where hydraulic testing of fabricated pipe joints is not carried out at manufacturer‘s
works, dye-penetrant test shall be carried out on the welded joints along with five per cent
radiography of such joints.878 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER -8
INSPECTION AND TESTING OF BOILERS AND PIPES DURING
CONSTRUCTION AND BOILER REGISTRATION
293. General.─ (1)The Inspecting Authorityshall follow the procedure provided under these
regulations during construction of aboiler at shop, field-site,in dealing applications for the
registration of a boiler and examinations of boilers.
(2) The boiler components shall be erected at site based on the final inspection report as per
Form-VIIIapproved by Competent Personand there is no need for any ground inspection or
submission of any other document like manufacturing drawings, design calculations.
294. Boiler component’s identification marking.─ (1) Convection bank tubes, loose
tubes, coils - evaporator super heater and economiser, riser downcomer and saturated
supply pipes, attemperator link piping, boiler integral andnon integral piping, water wall panel
without header shall be stencilled as per the table given below irrespective of material
grade, outside diameter and thickness.
(2) There shall be no hard stamping of competent person on these component.
Table 8/1
IDENTIFICATION ON BOILER PRESSURE PART COMPONENTS
Serial Component Punching with Location / Competent Identification
No. Stencilling Person
Stamp
(1) (2) (3) (4) (5)
1 Boiler Block Assembly Hard Punching on D/E Yes As per Form-I(Part-C)
2 Fire tube Boiler Assembly Hard Punching on shell Yes As per Form-I(Part-C)
3 Steam Drum Hard Punching on D/E Yes As per Form-I(Part-C)
4 Water Drum Hard Punching on D/E Yes As per Form-I(Part-C)
5 Panel with Header Hard Punching on Header Yes As per Form-I(Part-C)
6 Convection Bank Assembly Hard Punching on Header Yes As per Form-I(Part-C)
7 In bed Super Heater Assembly Hard Punching on Header Yes As per Form-I(Part-C)
8 Super Heater Assembly Hard Punching on Header Yes As per Form-I(Part-C)
9 Bi Drum Evaporator Assembly Hard Punching on D/E Yes As per Form-I(Part-C)
10 In bed Evaporator Assembly Hard Punching on Header Yes As per Form-I(Part-C)
11 HRSG Harp Hard Punching on Header Yes As per Form-I(Part-C)
12 HRSG Modular Assembly Hard Punching on Header Yes As per Form-I(Part-C)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 879
13 Economiser Modular Assembly Hard Punching on Header Yes As per Form-I(Part-C)
14 Headers Hard Punching on Header Yes As per Form-I(Part-C)
15 Tanks Hard Punching on shell Yes As per Form-I(Part-C)
16 Water Collecting tank Hard Punching on Pipe Yes As per Form-I(Part-C)
17 Vertical Steam separator Hard Punching on Pipe Yes As per Form-I(Part-C)
18 Panel without Header Stencilling on tube No Boiler No, Drawing
No, Part no
19 Riser, Down comer Saturated Stencilling on Pipe No Boiler No Drawing
Supply Pipe No, Part no
20 Attemperator Link Stencilling on Pipe No Boiler No, Drawing
No, Part no
21 Boiler Integral Piping Stencilling on Pipe No Boiler No, Drawing
No, Part no
22 Boiler Non Integral Piping Stencilling on Pipe No Boiler No, Drawing
No, Part no
23 Convection Bank Tube Stencilling on tube No Boiler No, Tube no /
Part no
24 Loose Tubes Stencilling on tube No Boiler No, Tube no /
Part no
25 Coils - Evaporator, Stencilling on tube No Boiler No, Item
Superheater& Economiser, Re- Description, Part No
heater coils , Platen super
heater coils
295. Preparations of Inspection.─(1)(a)(i) At every boilerexamination or grant of renewal of
a certificate, the boiler shall be empty and all its parts shall be thoroughly cleaned. Except as
provided for in sub-regulation (6), all doors of manholes, hand holes and sight holes and
cleaning plugs and all caps in the headers and mud drums of water tube boilers, all fire bars,
bearers, front plates, bridge plates, fire bridges brick arches, oil fuel burners and mechanical
stoker fitting shall be removed.
(ii) All valves and cocks comprising the boiler mounting shall be opened up and taken apart
and the valves or cocks grounded, when necessary, before the Competent Person‘s visit.
(b) The removal of fire bars, bearers, front plates, bridge plates, fire bridges, brick arches,
oil fuel burners and mechanical stoker fitting is not required at the time of registration for
boilers for which boiler pressure part assembly is completed and hydraulic test has been
carried out at manufacturer works by Competent Person.
(2) (a) In case of requirement for inspection by the Competent Person, provision shall be
made for removal of lagging or brick-work or other concealing part for drilling of plates,
and for verifying the pressure gauge and safety valve dimensions and weights.
(b) The removal of lagging or brick-work or other concealing part shall not be required at
the time of registration of boilers for which boiler pressure part assembly is completed and
hydraulic test carried out at manufacturer works by Competent Person.
(3) All smoke tubes, exterior of water tubes, smoke boxes, and external flues shall be swept
clean.880 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) Provision shall be made for effective disconnection of all steam and hot water
communication with another boiler under steam as required in Chapter-9.
(5) No blank flange or plug shall be inserted between a safety valve chest and the boiler
generally and where it is permitted by the Competent Person, the blank flange or plug
shall be removed in his presence.
(6) At alternative annual inspections and subject to a minimum of three bottom rows or all
tubes subject to the first pass of heat being opened up for inspection, the Competent
Person may at his discretion relax the preparation for inspection specified under sub-
regulation (1)above in favour of boilers having an evaporative capacity of 90 tons per
hour and over, and using treated feed water to the satisfaction of the Competent Person.
(7) For boilers used for electric power generation, the inspection shall be carried out as per
the provisions of Appendix-H.
(8) (a) For Waste Heat Boilers (Fired and Unfired) used exclusively in continuous process
plants, the inspection shall be carried out as per the provisions of Appendix-I.
(b) The boilers used in corrosive environment such as sulphuric acid plants shall not be
covered under the provisions of Appendix-I.
(9) In the case of forced flow and forced circulation types of boilers, proper circulation in
every section of the circuit shall be ensured by the flow of water.
296. Hydraulic test of boilers.─ (1) Every boiler shall be hydraulically tested in the
presence of an Inspector.
(2) Boiler working at a pressureof 50 kg/cm2 (g) or more, and used exclusively for electric
power generation need not be hydraulically tested for issue of certificate every year,
provided the inspection of such boiler is carried out as per the provisions of sub-
regulation (7) of regulation 295.
(3) Waste Heat Boilers (Fired and Unfired) used exclusively in continuous process plants
need not be hydraulically tested for issue of certificate every year, provided the
inspection of such boilers is carried out as per the provisions of sub-regulation (8) of
regulation 295.
297. Preparation for hydraulic tests.─ (1) The chest of all mountings subject to steam
pressure shall be in place and shut tight or blank flanged.
(2) The safety valves shall be invariably removed and the chest opening blank flanged.
(3) The attachment for the Competent Person‘s pressure gauge shall be in order.
(4) (a) All doors shall be properly jointed and tightened up.
(b) The boiler shall be completely filled with waterwith care being taken to allow all air
to escape and, if possible, a preliminary test not exceeding the design pressure of the[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 881
boiler shall be taken before the Competent Person‘s visit, to test the tightness of the
joints.
(5) When a boiler is hydraulically tested for the first time, it shall be entirely cleared of
lagging or brick work; at subsequent tests the lagging or brick work, or portions
thereof, shall be removed, if required by the Competent Person, provided the
Competent Person may, at his discretion, allow the lagging and brick work to remain
in situ, in case of boilers where the covered parts have been fabricated and tested
before erection in position.
298. Procedure of hydraulic tests.─ (1) (a) Subject to the provisions of sub-regulation
(1)of regulation300, every sub-critical boiler shall be hydraulically tested after erection at site
in presence of the Competent Person to 1.25 times the design pressure as certified by the
Inspecting Authority in Form-I(Part-B) or Form-I(Part-C) as the case may be, to be stamped
on the boiler, as free from any indication of weakness or defects and every Super critical
boiler, with no fixed steam and waterline, having pressure parts designed for different
pressure levels along the path of water-steam flow, shall be hydraulically tested after
erection at site in presence of the Competent Person to a pressure of not less than 1.5 times
the design pressure at the super heater outlet but not less than 1.25 times the design
pressure of any part of the boiler as certified by the Inspecting Authority in Form-I(Part-B) or
Form-I(Part-C) as the case may be, to be stamped on the boiler, as free from any indication
of weakness or defects.
(b) If all components of the boiler in the manufacturer‘s premises have not been tested
hydraulically as per regulation 167, the test, on completion, shall be taken to 1.5 times
the design pressure.
(c) The temperature of the water used as medium of pressure testing shall not be less
than 20°C and greater than 50°C.
(d) The test pressure shall be raised gradually under proper control at all times so that it
never exceeds by more than 6% of the required pressure and maintained for 30 minutes
whereupon the pressure shall be reduced to maximum allowable working pressure and
maintained for sufficient time to permit close visual inspection for leakage of pressure
parts.
(e) The hydraulic test at site for the components meant for renovation or retrofit or
spares shall be carried out at 1.25 times of the design pressure and these
components need not be hydraulically tested at manufacturer‘s premises.
(2) The boiler shall satisfactorily withstand such pressure without appreciable leakage or
undue deflection or distortion of its parts for at least ten consecutive minutes. If the
test if not satisfactory, the design pressure allowable by calculation shall be suitably
reduced, unless the owner desires to make such alterations as will enable the boiler
to withstand the hydraulic testsatisfactorily, in which case the boiler shall again be
examined after the alterations have been made, the pressure recalculated, if
necessary and the boiler tested to satisfaction of the Competent Person.882 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) At the first hydraulic test of a boiler prior to the issue of an original certificate,deflection
measurements shall be made before, during and after test of each furnace length, fire-
box and flat end or other plates.
(4) After application of the hydraulic test, the Competent Person shall carefully examine
the boiler inside and outside and satisfy himself that it has satisfactorily withstood the
test.
(5) (a) In caseany part of the boiler show undue deflection or indication of permanent set
during the progress of the test, the pressure shall be released immediately such
indications are observed.
(b) The maximum allowable working pressure for the part shall be 40 per cent of the
test pressure applied when the point of permanent set was reached. This procedure
shall apply to any boiler at any test.
(6) Hydraulic tests of boilers at subsequent examination shall be at 1.25 times the design
pressure of the boiler.
(7) When the internal construction or size of a boiler does not permit the Competent
Person to get inside it for examining all its parts closely, he shall see it tested by
hydraulic pressure to 1.5 times the design pressure at each inspection or the grant or
renewal of a certificate.
(8) Water tube locomotive type boilerand all tubular boilers shall be hydraulically tested at
each inspection for the grant or renewal of a certificate, unless such test is waived
under the orders of the Chief Inspector.
(9) The Competent Person may if he considers it necessary, apply a hydraulic test to any
boiler at any inspection.
(10) Except in the case of vertical boilers having heating surface ofless than
18.5m2portable and vehicular boilers, which do not require re-erection or building in
brick work, the hydraulic tests of all boilers shall be conducted only after the erection of
the boiler in situ and all boilers shall after re-erection in a position different from that in
which were last examined by hydraulically tested.
(11) A hydraulic test shall also be taken granting an increased pressure certificate and
after repairing a boiler. However, in the case of minor repairs to the water tube boilers
where non-destructive testing(NDT) has been carried out, hydraulic testing may be
dispensed with provided non-destructive testing is carried out by an approved method.
(12) When carrying out hydraulic test, Competent Person shall ensure that the pressure
gauges have valid calibration.
299. Steam tests.─ (1) Every boiler before registration and every boiler of which the design
pressure has been altered shall, before the issue of an original or renewal certificate for
such boiler, be tested under steam to the satisfaction of the Inspector. Inspector shall send[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 883
notice to the owner for the date fixed for the steam test and on completion of the test the
Inspector shall enter all relevant details in the memorandum of inspection books.
(2) At the time of test, the safety valves shall be left free and capable of being adjusted to the
approved design pressure.
(3) After adjustment of the valves to the correct blowing pressure, the boiler shall be tried
under full steam and firing with the feed water shut off and the stop-valve closed, and the
Inspector shall note the accumulation of pressure and other details of the test as
accumulation of pressure and other details of the test as well as the loading and
adjustment of the safety valves.
(a) In the case of sub-critical water tube boiler or boilers fitted with super heater, the
feed water connection and stop valve need not be shut off and if the total valve
area is lifted and found to be adequate by calculations, the requirement of the
accumulation test may be assumed to have been satisfied if the valves are or
have been found so adjusted that at least one safety valve on boiler shall be set
at or below design pressure and remaining safety valves can be set up to three
per-cent above the design pressure:
Provided that all valves shall be lifted so that all steam which can be
generated by the boiler can be discharged with a pressure rise not exceeding ten
per-cent of the design pressure;
(b) In the case of super critical boiler or boilers, with no fixed steam and waterline,
having pressure parts designed for different pressure levels along with the path of
water-steam flow, safety valves shall be set up to ten per-cent above the
maximum allowable working pressure:
Provided that all the valves shall be lifted so that all steam which can be
generated by the boiler can be discharged with a pressure rise not exceeding
thirteen percent of the individual component maximum allowable working
pressure, provided the boiler is having automatic burner management system
and Master Fuel Trip (MFT) on main steam pressure. High lifting of safety valves
can be tested by hydraulically actuated methods.
(4) Before the safety valve test, the Inspector shall satisfy himself that the water gauges
are in working order and that the feed apparatus is capable of supplying the boiler
with sufficient water.
(5) Where as per rules, a person-in-charge of a boiler holding certificate of competency
is not required, the Inspector may, when he thinks fit, satisfy himself by questioning
or by practical test, whether the person-in-charge of the boiler understands the use
and purpose of the water gauges, the pressure gauge, the safety valves, the feed
water-supply and blow down.884 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) When witnessing safety valves test, Inspector shall ensure that the pressure gauges
have valid calibration.
(7) No steam gauge shall be used without a syphon filled with water between it and the
boiler.
(8) When the accumulation of pressure at a steam test exceeds ten per cent of the
design pressure the area of the safety valves shall be considered insufficient, and a
certificate shall be refused until the safety valve area is increased.
(9) An Inspector may, when visiting a factory for any purpose, verify the correctness of
the safety valve and pressure gauge of any boiler under steam by comparison with
his standard pressure gauge.
*Note: A steam test is primarily intended for ascertaining that the safety valves are sufficient to relieve
boilers effectively of excess steam and operate at the time when the maximum allowable working
pressure is reached.
300. Procedure for Registration.─ (1) On receipt of an application for registration under
sub-section (1) of Section 12 of the Act, along with certificates and drawings as provided in
regulation-8, the Inspector shall, when the boiler has been properly prepared for
examination proceed to inspect it with a view to satisfy himself that the boiler has not
suffered any damage during its transit from the place of manufacture to the site of erection
and if he is satisfied with the correctness of the maker‘s certificate and other particulars
relating to the material and construction as mentioned under clause (c) of sub-section (1) of
section 19 of the Act and regulation 7, take due account of the workmanship and details of
the construction of each part;
(2) Subject to any discretionary power exercised by the Chief Inspector, he may accept the
permissible working pressure of the boiler as certified by the Inspecting Authority in
Form-I(Part-B) or Form-I(Part-C) as the case may beand Form-IV(Part-A) and after inspecting
the boiler, the Inspector shall conduct hydraulic test as per requirements of regulations
298 and a provisional order under section 14 in Form-X shall be issued after the
hydraulic test.
(3) If the requirements of provisional order under sub-regulation (2) are not fulfilled, fresh
provisional orders shall be issued for a maximum of another six months but not
exceeding twelve months from the date of issue of first provisional order, without any
subsequent inspection and payment of fees.
(4) The Inspector shall enter the above particulars and dimensions of the boiler, together
with details of the hydraulic test, in Form-XI (Memorandum of Inspection Book)provided
underregulation 306and with all the makers‘ papers for the boiler, shall be submitted to
the Chief Inspector with the Inspector‘s report after issue of registry number, the
Inspector shall conduct steam test as per regulation 299 and enter the details of steam
test in Form-XI.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 885
301. Engraving of registry number.─ (1) (a) (i) The registry number of every boiler shall,
within a period of one month from the date of receipt thereof, shall be cut in the front plate or
any such position as shall be pointed out by the Inspector.
(ii) The device for each Stateor Union territory shall be distinguished by the following letters
as mentioned in the Table below,namely:-
Table
Serial Name of State/Union territory Letters
No.
(1) (2) (3)
1. Andaman and Nicobar Islands A&N
2. Andhra Pradesh AP
3. Arunachal Pradesh ARP
4. Assam A
5. Bihar BR
6. Chhattisgarh CG
7. Dadra and Nagar Haveli DNH
8. Delhi D
9. Goa G
10. Gujarat GT
11. Haryana HA
12. Himachal Pradesh HP
13. Jammu & Kashmir JK
14. Jharkhand JH
15. Karnataka KTK
16. Kerala K
17. Laccadive, Minicoy & Amindivi Islands LI
18. Ladakh LA
19. Madhya Pradesh MP
20. Maharashtra MR
21. Manipur MA
22. Meghalaya ML
23. Nagaland NL
24. Orissa OR
25. Pondicherry PY
26. Punjab PI
27. Rajasthan RI
28. Tamil Nadu T
29. Telangana TG
30. Tripura TR
31. Uttar Pradesh UP
32. Uttrakhand UR
33. West Bengal WBL
(b) (i) The distinguishing letters shall be engraved above a number and separated there
from by a horizontal line 64 mm in length.
(ii) The letters and figures shall be 25 mm in height and of suitable breadth, provided that
in the case of small boilers the letters and figures of the device may, in the discretion of
the Chief Inspector, be reduced to 10 mm in height. The whole shall be enclosed in a
rectangle, the upper and lower sides of which shall be 76 mm apart and 6 mm clear of
the top of the letters and the bottom of the figures respectively as indicated below:
Example:-886 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
MR
1234
(c) In the case of registration of small industrial boilers, the letter ―S‖ shall be added as a
prefixed to the registration number below the distinguishing letters for State or Union
territories as indicated below: -
Example:-
UP
S- ----
(d) The side lines shall be at equal distance clear from the figuresand the engraving shall
not be less than 0.4 mm in depth.
(2) The engraving shall be complete and ready for verification within one month from the
date of receipt of registry number, and the fact shall be reported to the Chief
Inspector of Boiler within this period.
(3) (a) Boilers having registry devices differing from those prescribed herein shall have
such devices altered or crossed out and engraved a new one in conformity with those
prescribed above.
(b) The original numbers of such boilers shall be retained in the new device, provided
that in the case of boilers which were registered in a State or Union territory which
has since become extinct, a new number shall be given by the State or Union
territory where the Boiler is operating and any number once allotted to a boiler shall
not be used again for another boiler.
302. Measurement of Heating Surface.─ (1) For the purpose of regulating the area of the
safety valves and the amount of registration and inspection fees, the heating surface of a
boiler shall be the total surface of all plates and tubes exposed to heat on one side and in
contact with water on the other measured on the water side or the fire side, whichever is
larger.
(2) (a) For Lancashire and Cornish boilers, the total heating surface shall include the
wetted surface of the furnaces between the end plates, the fire surface of cross tubes
where fitted, and the part of the external shell below the side flue covers. In estimating the
areas, furnaces shall be considered as plain cylinders andthe area of their wetted surface
shall be taken as their mean external circumference X the length of the boiler between end
plates. For the shell, the width of that part of the circumference below the flue covers shall
be taken as = 2D, and this width multiplied by the length between end plates, shall be
taken as the area of shell heating surface.
(b) The part of the surface of the back end plate exposed to heat shall be omitted from
the calculation.
Example – The formula for the total heating surface of a Lancashire boiler having
plain furnaces without cross tubes is as follows: -[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 887
Heating Surface in square meter = 2 L (3.14 d + D). ―L‖ is the length of the boiler
between end plates in meter, ―d‖ is the mean external diameter of the furnaces in
meter and ―D‖ is the internal diameter of the largest belt of shell in meter.
(3) (a) For steam and water drums of water tube boilers, the heating surface of the drum
shall be taken as half the external mean circumference multiplied by the clear length of
drum between the outer brick walls or centers of cross boxes, as the case may be.
(b) The heating surface of the tubes shall be taken as the external surface of the tubes
between the tube plates or heaters.
(c) The heating surface of the heater shall be omitted from the calculation.
(4) (a) For marine boilers of the fire-tube type, the heating surface shall include the
wetted surface of the furnaces between the tube plates (considered in the same way as for
Lancashire boilers), the wetted surface of the combustion chambers (less the area of the
tube holes) and the wetted surface of the tubes between tube plates.
(b) The parts of the front tube plate exposed to heat shall be omitted from the calculation.
(5) (a) For locomotive type boilers, the heating surface shall include the wetted surface
of the fire-box above the foundation ring (less the area of the tube holes and the fire hole
and ring) and the wetted surface of the tubes between the tube plates.
(b) The smoke box tube plate shall be omitted from the calculation.
(6) For vertical boilers of ordinary type, the heating surface shall include the wetted
surface of the fire-box above the foundation ring (less the area of fire hole and ring and
tube holes if any) and the surface of any cross or other tubes and uptake below the lowest
water level shown in the gauge glass.
(7) For Electrode boilers, the heating surface shall be calculated as per the following
formulae,-
E
Heating surface = --
6
Where,
E = the equivalent evaporation at 100°C under normal load, which x K.W,
K.W.= the kilowatts absorbed at the stated volume when the water in the boiler has a
specific resistance of not less than 200 ohms per inch tube at 65°C and while the boiler is
delivering its normal output of steam at its design pressure with the feed water temperature
of 15°C.
(8) No deduction shall be made for stays,in calculating the heating surface.
(9) For any other heating surface not provided for in the foregoing instructions, the same
general procedure shall be observed.
303. Boiler rating.─The boiler rating shall be the number of square meters (to the nearest
whole number) in the heating surface of the boiler as determined under regulation 302.888 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
304. Registration fee.─ (1) The fee required for registration under sub-section (2) of section
12 of the Act shall be as per table 8/2 of this regulation:
Provided that the Chief Inspector may direct that no fee shall be payable in respect of
a fresh application made in pursuance of sub-section (2) of section 19 of the Act.
(2)Inspection fee for separately fired super-heater, re-heater and economiser shall be
charged at the same rate as the registration fee.
(3) For heat recovery steam generators with finned tubes, the fee shall be calculated on
heating surface area of bare tubes and on one fourth of heating surface area of fins.
TABLE 8/2
Registration Fee (regulation 304)
Serial Boiler Ratings Fee in
No.
rupees
(1) (2) (3)
1 For Small Industrial Boiler as per Chapter-14 and Small solar boilers as per 1200
Chapter-17
2 For Boiler Rating not exceeding 10 sq. meters 1800
3 For Boiler Rating exceeding 10 sq. meters but not exceeding 30 sq. meters 2400
4 For Boiler Rating exceeding 30 sq. meters but not exceeding 50 sq. meters 2700
5 For Boiler Rating exceeding 50 sq. meters but not exceeding 70 sq. meters 3300
6 For Boiler Rating exceeding 70 sq. meters but not exceeding 90 sq. meters 3900
7 For Boiler Rating exceeding 90 sq. meters but not exceeding 110 sq. meters 4500
8 For Boiler Rating exceeding 110 sq. meters but not exceeding 200 sq. meters 5100
9 For Boiler Rating exceeding 200 sq. meters but not exceeding 400 sq. meters 5700
10 For Boiler Rating exceeding 400 sq. meters but not exceeding 600 sq. meters 6600
11 For Boiler Rating exceeding 600 sq. meters but not exceeding 800 sq. meters 7200
12 For Boiler Rating exceeding 800 sq. meters but not exceeding 1000 sq. meters 8100
13 For Boiler Rating exceeding 1000 sq. meters but not exceeding 1200 sq. meters 9600
14 For Boiler Rating exceeding 1200 sq. meters but not exceeding 1400 sq. meters 10800
15 For Boiler Rating exceeding 1400 sq. meters but not exceeding 1600 sq. meters 12600
16 For Boiler Rating exceeding 1600 sq. meters but not exceeding 1800 sq. meters 13500[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 889
17 For Boiler Rating exceeding 1800 sq. meters but not exceeding 2000 sq. meters 15000
18 For Boiler Rating exceeding 2000 sq. meters but not exceeding 2200 sq. meters 16200
19 For Boiler Rating exceeding 2200 sq. meters but not exceeding 2400 sq. meters 18000
20 For Boiler Rating exceeding 2400 sq. meters but not exceeding 2600 sq. meters 18900
21 For Boiler Rating exceeding 2600 sq. meters but not exceeding 2800 sq. meters 20400
22 For Boiler Rating exceeding 2800 sq. meters but not exceeding 3000 sq. meters 21600
23 For Boiler Rating exceeding 3000 sq. meters 21600 + 600
for every 200
sq. meters or
part thereof
Note: The State governments may, by notification may make rules for fees as per clause (b)
of sub-section (1) of section 42 of the Act, which shall prevail
305. Inspection fee for renewal of certificate. ─ (1) The required fee to accompany an
application under sub-section (3) of section 13 of the Act shall be as per table 8/3 of this
regulation:
Provided that the Chief Inspector may direct that no fee shall be payable in respect of
a fresh application made in pursuance of sub-section (2) of section 19 of the Act.
(2) Inspection fee for separately fired super-heater, re-heater and feed water heater shall
be charged at the same rate.
(3) For heat recovery steam generators with finned tubes, the fee shall be calculated on
heating surface area of bare tubes and on one fourth of heating surface area of fins.
(4) For renewal of certificate for a period of six months or less on the request of owner,
half of applicable fee shall be payable.
(5) Applicable fee shall be payable again for the re-inspection of a defective boiler after
completion of repairs.
(6) For inspection on Sundaysor on anypublic holiday notified under the Negotiable
Instrument Act, 1881 (26 of 1881), on the request of owner, additional fee equivalent to half
of applicable fee shall be payable.890 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
TABLE 8/3
Inspection fee for renewal of Certificate (regulation 305)
Serial Boiler Ratings Fee in
No. rupees
(1) (2) (3)
1 For Small Industrial Boiler as per Chapter-14 and Small solar boilers as per 1000
Chapter-17
2 For Boiler Rating not exceeding 10 sq. meters 1600
3 For Boiler Rating exceeding 10 sq. meters but not exceeding 30 sq. meters 2100
4 For Boiler Rating exceeding 30 sq. meters but not exceeding 50 sq. meters 2400
5 For Boiler Rating exceeding 50 sq. meters but not exceeding 70 sq. meters 2700
6 For Boiler Rating exceeding 70 sq. meters but not exceeding 90 sq. meters 3400
7 For Boiler Rating exceeding 90 sq. meters but not exceeding 110 sq. meters 4000
8 For Boiler Rating exceeding 110 sq. meters but not exceeding 200 sq. meters 4500
9 For Boiler Rating exceeding 200 sq. meters but not exceeding 400 sq. meters 5000
10 For Boiler Rating exceeding 400 sq. meters but not exceeding 600 sq. meters 5800
11 For Boiler Rating exceeding 600 sq. meters but not exceeding 800 sq. meters 6300
12 For Boiler Rating exceeding 800 sq. meters but not exceeding 1000 sq. meters 7100
13 For Boiler Rating exceeding 1000 sq. meters but not exceeding 1200 sq. meters 8400
14 For Boiler Rating exceeding 1200 sq. meters but not exceeding 1400 sq. meters 9500
15 For Boiler Rating exceeding 1400 sq. meters but not exceeding 1600 sq. meters 11100
16 For Boiler Rating exceeding 1600 sq. meters but not exceeding 1800 sq. meters 11900
17 For Boiler Rating exceeding 1800 sq. meters but not exceeding 2000 sq. meters 13200
18 For Boiler Rating exceeding 2000 sq. meters but not exceeding 2200 sq. meters 14300
19 For Boiler Rating exceeding 2200 sq. meters but not exceeding 2400 sq. meters 15800
20 For Boiler Rating exceeding 2400 sq. meters but not exceeding 2600 sq. meters 16600
21 For Boiler Rating exceeding 2600 sq. meters but not exceeding 2800 sq. meters 18000
22 For Boiler Rating exceeding 2800 sq. meters but not exceeding 3000 sq. meters 19000
23 For Boiler Rating exceeding 3000 sq. meters 19000 + 500
for every 200
sq. meters or
part thereof[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 891
306. Memorandum of Inspection Book .─ (1) A Memorandum of Inspection Book shall be
prepared for each boiler in Form-XIand the Inspector shall enter all particulars in ink and
dimensions of the boilers with the particulars of hydraulic test and steam test and his
inspection notes in this book;
(2) At subsequent inspection, Competent Person shall enter the dates of the Inspections,
hydraulic tests and steam tests, when such are made with their notes thereon;
(3) the Inspector or Competent Person, as the case may be, shall also enter in the
Memorandum of Inspection Book, the general condition of the boiler and of repairs, to
what extent boilers have been cleared of brick work, a report of all casual visits for
inspection of repairs, for inspection of main steam pipes, and reports on accidents;
(4) (a) On submission of the Memorandum Book to the Chief Inspector, he will in the
case of newly registered boilers, check all particulars and calculations and approve
the design pressure that is to be permitted.
(b) In the case of old boilers, the Chief Inspector shall examine the Inspector‘s notes
of inspection and proposals made for repairs or reduction of pressure.
(c) A pressure once approved for the boiler shall not be altered without the written
authority of the Chief Inspector.
(d)The Memorandum of Inspection Book shall be kept clean and up-to-date and the
Inspection Book except when actually required by the Competent Person, shall be
kept in the office of the Chief Inspector.
307. Registration book.─ (1) A registration book or copy of memorandum of inspection
book containing all the particulars required for registration shall be maintained in the office
of the Chief Inspector in Form-XIand any orders passed by him regarding the boiler shall
be entered in the registration book under his initials.
(2) The Chief Inspector shall also see that the note of subsequent inspections entered in
the Memorandum of Inspection Book are copied in the Registration book.
308. Maintenance of records.─ (1) The Inspecting Authority shall maintain the records
pertaining to the boiler or the economiser, as the case may be, including all the certificates
provided in Form-I(Part-B), Form-I(Part-C),Form-IV(Part-A), Form-IV(Part-B), Form-IV(Part-
C), Form-IV(Part-D), Form-V(Part-A) and Form-XVI and the copies of the approved drawings
for a period of at least three years after registration of the boiler and thereafter these
records may be sent to the owner of the boiler by the Inspecting Authority.
(2) The owner of a boiler or economiser shall maintain the records pertaining to the boiler or
economiser as the case may be, including the certificates provided in Form-I(Part-B),
Form-I(Part-C), Form-IV(Part-B), Form-IV(Part-C), Form-V(Part-A), and Form-XV and
the copies of the approved drawing for the entire life of the boiler or economiser as the
case may be.892 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) In the event of any transfer of the ownership, the records mentioned above shall be
transferred to the new owner and the new owner will maintain the record in accordance
with the provision of sub-regulation (2) above.
(4) The manufacturer of boiler or economiser or steam pipe shall maintain the record
pertaining to the boiler or economiser or steam pipe, as the case may be, including the
certificates provided in Form-I(Part-B), Form-I(Part-C), Form-IV(Part-B), Form-IV(Part-C),
Form-IV(Part-D), Form-V(Part-A), Form-V(Part-B) , Form-XV, and Form-XVI and the
copies of the approved drawings for a period of at least five years.
309. Transfer of memorandum of inspection book and registration book.─On transfer
of a boiler from one state to another, the memorandum of inspection book and the
registration book shall, on the request of Chief Inspector of the state to which the boiler has
been transferred, be forwarded to that officer who shall take over their custody and maintain
them.
310. Grant of Certificate.─ (1) A certificate for the use of a boiler shall be granted in Form-
XII.
(2) In the certificate, the design pressure at which the boiler shall be worked, the load to be
placed on the safety valves or the thickness of the washers or ferrules required as safeguard
against overloading and the date and pressure of the last hydraulic test of the boiler shall be
entered.
(3) The Inspector‘s remarks shall be as brief as possible.
311. Procedure for inspection of installed boilers.─(1) (a)It is essential to have every part
of the boiler that is accessible, open and properly prepared for examination, internally and
externally.
(b)All boilers have openings through which an examination may be made and for which
operation are closed; all such parts shall be opened whether for access to water surfaces, or
heater surfaces.
(c)In cooling a boiler down for inspection or repairs, the water should not be withdrawn until
the setting is sufficiently cooled to avoid damage to the boiler and when possible allowed to
cool down naturally.
(d)It is not necessary, in order to comply with ordinary prudence, to remove insulation
material, masonry, or fixed parts of the boiler, unless defects or deterioration peculiar to
certain types of in accessible parts of boilers are suspected and where there is moisture or
vapour showing through the covering should be removed at once and a complete
investigation made.
(e)Particular attention shall be paid to the external parts of boilers in the way of seating
blocks, especially when the situation is damp. Saddle tanks and engine fittings of locomotive
type boilers shall be removed to facilitate the inspection of the parts underneath at the first
inspection, and at any reasonable period afterwards, if the Competent Person cannot
otherwise satisfy himself as to the condition of those parts.
(f)Upon sufficient visible evidence or suspicion due to age or other causes, every effort shall
be made to discover the true condition, even to the removal of insulating material, masonry
or fixed parts of a boiler. Sometimes drilling or cutting away of parts is justifiable and
necessary to positively determine this condition.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 893
(2) The Competent Person shall, whenever the size permits, go inside it and make a
thorough inspection of all its internal parts. Before doing so, he shall, satisfy himself that
proper provision has been made for disconnecting the boiler from any other boiler under
steam. In case he find that proper provision for disconnection has not been made or that
the boiler has not been properly cleaned, or scaled, or that is unreasonably hot, he shall
decline to proceed with the inspection and shall report the facts to the Inspecting
Authority or Chief Inspector as the case may be,for orders. When a boiler is of such a
size or its construction is such that the Competent Person cannot go inside it, there
should be sufficient sight holes or hand holes provided to enable him to see the principal
internal parts; if any important part of a boiler is so constructed that the Competent
Person cannot examine it, he should report the facts to the Inspecting Authority or Chief
Inspector as the case may be, for orders.
(3) In the case of forced circulation and forced flow boilers which are not accessible to close
visual inspection, the Competent Person shall, besides thorough examination, ensure by
the flow of water that proper circulation is maintained through all sections of the water
circuits.
(4) (a)Upon entering a boiler, the Competent Person shall examine all surfaces of the
exposed metal to observe the action caused by the use of water, oil scale solvents, or
other substances which may have intentionally or unintentionally gone in with the feed
water. Any evidence of oil is dangerous and immediate steps shall be taken to prevent
any further entrance of oil into the boiler.
(b)Oil or scale in the tubes of water-tube boilers or on plates over the fire of any boiler is
particularly bad, often causing them to rupture.
(5) A given amount of corrosion along or immediately adjacent to a seam is more serious
than a similar amount of corrosion in the solid plate away from the seams. Grooving
along longitudinal seams is especially significant as grooving or cracks are likely to occur
when the material is highly stressed. Severe corrosion is likely to occur at points where
the circulation of the water is poor and such places shall be examined most carefully for
evidences of corrosive action.
(6) If the Competent Person decides that a boiler in one or more of its parts is no longer fit
for the pressure approved for it, he shall without delay report his proposal for reducing
the pressure to the Chief Inspector and at the same time submit his calculation for the
wasted parts for check and approval of pressure.
(7) With regard to the pitting and wasting of shell plates, the Competent Person shall bear in
mind that thickness of shell plates mayreduce to an appreciable extent and still be
stronger than longitudinal seams.
(8) (a)All flanging shall be thoroughly inspected and particularly the flanges of circular and
plates that are not stayed.
(b)Internal grooving in the fillet of such heads and external grooving in the outer surfaces
of heads concave to pressure is very common since there is slight movement in the
heads of this character which produces this kind of defect. Some types of boilers have
what is known as the OG or reversed flange construction in some of their parts that may
be inaccessible to the eye, but the condition shall be determined by the insertion of a
mirror which at a proper angle will reflect back to the eye the condition of such a place,
or any other feasible manner.894 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(9) (a)All stays, whether diagonal or through, shall be examined to note that they are in even
tension.
(b) All fastened ends shall be examined to note whether cracks exist where the stays are
punched or drilled or rivets or bolts and, if not found in proper tension, the Competent
Person shall recommend their proper adjustment.
(10) (a)The manhole and other reinforcing plates, as well as nozzles or other connection
flanged or screwed into a boiler, shall be examined internally as well as externally to see
that they are not cracked or deformed, and wherever possible observation shall be made
for the inside of the boiler, as to the thoroughness with which its pipe connections are
made to the boiler.
(b)All openings to external attachments, such as water column connections, openings in
dry pipes and opening to safety valves, shall be noted to see that they are free from
obstructions.
(11) (a)Particular attention shall be given to the plate or tube surface exposed to the fire. The
Competent Person shall observe whether any part of the boiler has become deformed
during, operation by bulging or blistering; bulging is a distortion of the entire thickness of
the plate or tube where it takes place, while the blistering is a lamination or separation of
the plate due to foreign material being embedded in the ingot before the plate is rolled.
(b)If bulges or blisters are of such size as would seriously weaken the plate or tube and
especially when the leakage is noted coming from those defects, the boiler shall be
discontinued from service until the defective part or parts have received proper repairs.
(c)Careful observation shall be made to detect leakage from any portion of the boiler
structures, particularly in the vicinity of seams and tube ends.
(d)Fire tubes sometimes blister but rarely collapse, the Competent Person shall look
through the tubes for such defects and if they are found with a sufficient degree of
distortion they shall be removed.
(12) (a)Lap joint boilers are apt to crack where the plates lap in the longitudinal or straight
seam; if there is any evidence of leakage or other distress at this point, it shall be
thoroughly investigated and, if necessary rivets removed or the plate slotted in order to
determine whether cracks exist in the seam. Any cracks noted in shell plates are usually
dangerous except fire cracks that run from the edge of the plate into the rivet holes of
girth seams.
(b)A limited number of such fire cracks is not usually a very serious matter.
(13) The Competent Person shall test stay bolts by tapping one end of each bolt with a
hammer and when practicable a hammer or other heavy tool shall be held on the
opposite end to make the test more effective.
(14) (a) (i)Tubes in horizontal fire tube boilers deteriorate more rapidly at the ends toward
the fire, and they shall be carefully tapped with a light hammer on their outer surface to
ascertain whether there has been serious reduction in thickness.
(ii)The tubes of vertical tubular boilers are more susceptible to deterioration at the upper
open ends when exposed to the products of combustion without water protection.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 895
(iii)They shall be reached as far as possible either through the hand holes if any, or
inspected at the ends.
(b) (i)The surfaces shall be carefully examined to detect bulges or cracks, or any
evidences or defective welds.
(ii)Where there is a strong draft, the tubes may become thinned by corrosion
produced by the impingement or particles of fuel and ash, or the improper use of soot
blowers.
(iii)A leak from a tube frequently causes serious corrosive action on a number of
tubes in its immediate vicinity.
(c) (i)Where short tubes or nipples are employed in joining drums or headers,
there is a tendency for waste products of the furnace to lodge in the junction points
and such deposits are likely to cause corrosion if moisture is present.
(ii)All such places shall be thoroughly cleaned and examined.
(15) (i)The ligaments between tube holes in the heads of all types of fire-tube boilers and in
shells of water-tube boilers shall be examined.
(ii)If leakage is noted, it may denote a broken ligament.
(16) Steam pockets on surfaces are sometimes found in new or replacement work, and
wherever, this is possible or likely, the Competent Person shall make observation and, if
any are found, recommend the necessary changes.
(17) (a)(i)The steam and water pipes, including connections to the water column, shall be
examined for leaks, and if any are found, it shall be determined whether they are the
result of excessive strains due to expansion and contraction, or other causes.
(ii)The general arrangement of the piping in regard to the provisions, for expansion and
drainage, as well as adequate support at the proper points, shall be carefully noted.
(iii)The location of the various stop valves shall be observed to see that water will not be
pocketed when the valves are closed and thereby establish cause for water-hammer
action.
(b)The arrangement of connections between individual boilers and the main steam pipes
shall be especially noted to see that any change of position of the boiler due to setting or
other causes, will not produce an undue strain on the piping.
(c) It shall be ascertained whether all pipe connections to the boiler possess the proper
strength in their fastenings, whether tapped into the boiler, a fitting, or flange riveted to
the boiler.
(d) (i)The Competent Person shall determine whether there is provision for the
expansion and contraction of such piping, and that there is no undue vibration tending to
crystalize the parts subjected to it.
(ii)This includes all steam and water pipe and special attention shall be given to the blow
off pipes with their connections and fittings, because the expansion and contraction due
to rapid change in temperature and water-hammer action create a great strain upon the
entire blow off system, which is more pronounced when a number of blow off pipes are
joined in one common discharge.896 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iii)The freedom of the blow off connection on each boiler shall be tested whenever
possible by opening the valve for a few seconds, at which time it can be determined
whether there is excessive vibration. Blow off pipes should be free from external
dampness to prevent corrosion.
(18) (a)(i)The piping to the water column shall be carefully noted to see that there is no
chance of water being pocketed in the piping forming the steam connection to the water
column. The steam-pipe shall preferably drain towards to the water column.
(ii)The water pipe connection to the water column must drain towards the boiler.
(b) (i)The relative position of the water column to the fire surfaces of the boiler shall be
observed to determine whether the column is placed in accordance with the regulations.
The attachments shall be examined to determine their operating condition.
(19) (a)In Water-Tube boilers, it shall be noted, as far as possible, whether or not the proper
baffling is in place.
(b) In many types of boilers, the absence of baffling often causes high temperatures on
portions of the boiler structure which are not intended to be exposed to such
temperatures, from which a dangerous condition may result. The location of combustion
arches with respect to tube surfaces shall be carefully noted. These are sometimes
arranged so as to cause the flame to impinge on a particular part of a boiler and
produces overheating of the material and consequent danger of the rupture of the part.
(20) Localisation of heat brought about by improper or defective burner or stoker installation
or operation creating a blow pipe effect upon the boiler, shall be condemned.
(21) Where boilers are suspended, the supports and setting shall be carefully examined
specially at points where the boiler structure comes near the setting walls or floor. Often
accumulation of ash and soot will bind the boiler structure at such points and produce
excessive strains on the structure owing to the expansion of the parts under operating
conditions.
(22) (a) As the safety valves are the most important attachments on the boiler, they shall be
inspected with the utmost caution. There shall be no accumulations of rust, scale, or
other foreign substances located in the casings so as to interfere with the free operation
of valves. The setting and freedom of the safety valves shall be tested preferably by
raising the steam pressure to the blow-in-off point, or if this cannot be done, the valves
shall be tested by means of the try levers to ascertain if they are free. Where the steam
discharged from a safety valve is led through a pipe the Competent Person shall
determine at the time the valve is operating whether or not the drain, opening in the
discharge pipe is free and in accordance with the Regulations.
(b)If the Competent Person deems it necessary, in order to determine the freedom of
discharge from a safety valve, the discharge connections shall be removed. Under no
circumstances a stop valveshall be permitted between a boiler and its safety valve.
(23) The steam gauges on all boilers shall be removed and the Competent Person shall test
them and compare their readings with a standard test gauge. The readings of the steam[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 897
gauges shall be observed and compared when making an inspection with steam on the
boiler, where several boilers are in service connected to a common steam main. The
location of the steam gauges shall be noted to see whether or not it is exposed to high
temperature either externally, as would be the case if placed close to the smoke flue or
other high heated part of the boiler or setting, or exposed to heat internally due to lack of
protection of the gauge spring with a proper syphon or trap to prevent steam from
coming in contact with the spring. The Competent Person shall see that the provisions
are made for blowing out the pipe leading to the steam gauge.
312. Calculation of wasted shell.─(1)When any part is wasted and the Competent Person
is doubtful of its fitness for the pressure, he shall cause one or more small holes to be bored
and from them ascertain the average thickness of the parts from which he can satisfy himself
by calculation, in accordance with the formula applicable to the part.He shall enter such
gauging and calculations in the Memorandum of Inspection Book.
(2) In making calculations for a wasted part of a boiler shell, e.g., along the line of
seating blocks of a Lancashire boiler, the Competent Person shall use the following
formula:
2t x S
P = -------- Equation (8/1)
D x F
Where,
t = thickness of wasted plate, where thinnest in mm,
S = minimum tensile strength of material of shell in Kg/mm2,
D = internal diameter of shell in mm,
F = factor of safety, which shall not be less than 4.
P = maximum allowable working pressure in Kg/mm2
313. Ageing of shell type boilers.─(1) In order to take the ageing effect on boilers, the
design pressure as calculated from the formulae in these regulations shall be reduced as per
the table given below:
TABLE 8/4
Age of boiler exceeding (in years) 25 35 45 50 60 70 80 90 100
Design Pressure (Percentage) 95 90 85 80 70 60 50 40 30
(2) For those boilers, the plates of which have already been cut and tested shall be given
a further lease of life of fifty years from the date of the test of the boilers. The design pressure
that shall be allowed after the testing shall be reduced as per the table given below:
TABLE 8/5
Period after date of test (in years) 10 20 30 40 50
Design pressure allowed (percentage) 90 80 70 50 30898 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) (a)Shell type Waste Heat Boilers(un-fired), on completion of a life of twenty-five years,
shall be non-destructively tested by a Remnant Life Assessment Organization (RLAO)
approved by Central Boilers Board.
(b) Pressure parts, such as shell, end- plates, stand pipes etc., of such boilers,
shall be inspected by Ultrasonic testing, Magnetic particle testing and Dye
Penetrant testing.
(c) If results are acceptable as per the standards laid down by the Central Boilers
Board, a certificate shall be issued by the Chief Inspector or Director of
Boilers as the case may be, for extending the life of the boiler for a further
period of twelve years or such less period as recommended by the Remnant
Life Assessment Organisation.
(d) The working pressure of such boilers may be reduced on the
recommendation of the Remnant Life Assessment Organisation.
(e) The assessment or remnant life by non-destructive testing shall be carried
out thereafter every twelve years by a Remnant Life Assessment
Organisation (RLAO) approved by the Central Boilers Board. Such agency
shall work in close coordination with the office of the Chief inspector or
Director of Boilers as the case may be.
Note:
(1) It shall at the option of the owner to opt for the provisions of sub-regulation
(1) or sub-regulation(2) above or opt for the Remnant Life Assessment of
boiler as per sub-regulation(3).
(2) Wherever, it is not possible to carry out non-destructively testing of boiler
for Remnant Life Assessment, provisions of sub-regulation (1) or sub-
regulation(2) shall be applicable.
314. Ageing of Water Tube Boilers.─(1) (a) The boilers which are operating at
temperature of 400°C (main steam outlet temperature) and above shall be tested by the
Remnant Life Assessment Organisation for the components as per Table 8/6 of
regulation 315 after they are in operation for 100,000 hours for assessment of the
remnant life of the components.
(b) If results are acceptable as per the standards laid down by the Central Boilers
Board, a certificate shall be issued by the Chief Inspector or Director of Boilers as the
case may be, for extending the life of the boiler for a further period of six years or such
less period as recommended by the Remnant Life Assessment Organisation. This
assessment of remnant life shall be carried out thereafter every six years by a Remnant
Life Assessment Organisation approved by the Central Boilers Board. The Remnant Life
Assessment Organisation shall work in close coordination with the office of the Chief
Inspector or Director of Boilers as the case may be, in the field of remnant life
assessment and extension. The design pressure of such boilers may be reduced on the
recommendations of the Remnant Life Assessment Organisation;
(2) (a)The boilers which are operating at a temperature of less than 400°C (main steam
outlet temperature) on completion of a life of twenty-five years shall be tested by the[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 899
Remnant Life Assessment Organisation for the components as per Table 8/7 given in
regulation 315 for assessment of the remnant life of the components.
(b) If results are acceptable as per the standards laid down by the Central Boilers
Board, a certificate shall be issued by the Chief Inspector or Director of Boilers as the
case may be, for extending the life of the boiler for a further period of twelve years or
such less period as recommended by the Remnant Life Assessment Organisation.
This assessment of remnant life shall be carried out thereafter every twelve years by a
Remnant Life Assessment Organisation approved by the Central Boilers Board. The
Remnant Life Assessment Organisation shall work in close coordination with the office
of the Chief Inspector or Director of Boilers as the case may be, in the field of remnant
life assessment and extension. The design pressure of such boilers may be reduced
on the recommendations of Remnant Life Assessment Organisation.
(c) Notwithstanding anything contained in this regulation, for boilers working at a
pressure less that 50 kg/cm2 (g) and temperature less than 400°C (main steam outlet
temperature), such elaborate remnant life assessment is not mandatory. However, in such
cases, drums and headers of such boilers, shall be inspected by Ultrasonic testing, Magnetic
particle testing and Dye Penetrant test.
315.Ageing of heat recovery steam generators (HRSGs).─Heat Recovery Steam
Generators (HRSGs) which are operating at a temperature of 400°C (main steam outlet
temperature) and above shall be non-destructively tested by the Remnant Life Assessment
Organisation for the components as per Table 8/8 given below under this rule after they are
in operation for 100,000 hours for assessment of remnant life of the components.900 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
TABLE 8/6
Serial No. Component Visual Ultra- Mag- Liquid Repli- Samp- Deposit Outside Fibre Hard- Others
Sonic netic Dye cation ling Ana- Dia- Optic ness
Testing Par- Pene- lysis metre Inspe-
ticle trant and ction
inspe- Inspe- thick-
ction ction ness
1 2 3 4 5 6 7 8 9 10 11 12 13
1. Steam Drum Yes Yes Yes Yes Yes No Yes@ Yes* No Yes
2. Water drum Yes Yes Yes Yes Yes No Yes@ Yes* No Yes
3. Bottom Headers Yes Yes No Yes No No No Yes Yes Yes
4. Low Temperature header Yes Yes No Yes No No No Yes Yes Yes
(Less than 4000C)
5. Attemperator header Yes Yes No Yes Yes No No Yes Yes Yes Swell
measurement
6. Economiser Tubes Yes No No No No Yes No Yes No Yes#
7. Convention Super-heater Coils Yes No No No No Yes No Yes No Yes#
8. Primary Superheater Coils Yes No No No No Yes No Yes No Yes# Non-destructive
oxide thickness
inspection
9. Prefinal Super-heater Coiles Yes No No No No Yes$$ No Yes No Yes#
10. Final Super-heat Coils Yes No No No No Yes$$ No Yes No Yes#
11. Reheater Coils Yes No No No No Yes$$ No Yes No Yes#
12. High temperature headers Yes Yes No Yes Yes No YNo Yes Yes Yes
(4000C & above)
13. Main steam piping Yes No No No Yes No No Yes No Yes
14. Cold Reheat Piping Yes No No No Yes No No Yes No Yes
15. Hot Reheat Piping Yes No No No Yes No No Yes No Yes
16. SH/RH Links Yes Yes No Yes Yes No No Yes No No
17. Boiler Banks tubes Yes No No No No No No Yes No No
18. Furnace Water walls Yes No No No No Yes Yes@ Yes No No
Note: Other Components shall be checked/examined visually.
*OD or ID measurement to be taken for steam drum and water drum/bottom headers.
# Hardness of Tube samples (both inside and outside) to be checked at Laboratory.
@ Deposit analysis to be done.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 901
$$ Sample shall be subjected to accelerated creep rupture test.
TABLE 8/7
Serial Component Visual Ultra- Mag- Liquid Repli- Samp- Deposit Outside Fibre Hard- Others
No. Sonic netic Dye cation ling Ana- Dia- Optic ness
Testing Par- Pene- lysis metre Inspe-
ticle Trant and ction
inspe- Inspe- thick-
ction ction ness
1 2 3 4 5 6 7 8 9 10 11 12 13
1. Steam Drum Yes Yes Yes Yes Yes No Yes@ Yes* No No
2. Water drum Yes Yes Yes Yes Yes No Yes@ Yes* No No
3. Economiser Tubes Yes No No No No Yes No Yes No No
4. Convection Superheater Coils Yes No No No No Yes No Yes No No
5. Primary Superheater Coils Yes No No No No Yes No Yes No No
6. Final Superheater Coils Yes No No No No Yes No Yes No No
7. Water Headers Yes Yes No Yes No No No Yes Yes No
8. Steam headers Yes Yes No Yes No No No Yes Yes No
9. Bank Tubes Yes No No No No No No Yes No No
10. Furnace Water wall Yes No No No No Yes Yes@ Yes No No
11. Main Steam Piping Yes No No Yes No No No Yes No No
Note: Other Components shall be checked/examined visually.
*OD or ID measurement to be taken for steam drum and water drum/bottom headers.
# Hardness of Tube samples (both inside and outside) to be checked at Laboratory.
@ Deposit analysis shall be undertaken at laboratory.
TABLE 8/8
Serial No. Component Visual Ultra- Mag- Liquid Repli- Sam Deposit Outside Fibre Hard- Others
Sonic netic Dye cation p- Ana- Dia- Optic ness
Testi Par- Pene- ling lysis metre Inspe-
ng ticle Trant and ction
inspe- Inspe- thick-902 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
ction ction ness
1 2 3 4 5 6 7 8 9 10 11 12 13
1. SH/RH Tubes No No No No No Yes* No No No Yes*
2. SH/RH Inlet & Yes No No No Yes # No No Yes No Yes
Outlet Header
3. DESH Header Yes No No No Yes# No No Yes No Yes
4. DESH Inlet & Outlet Yes No No No Yes# No No Yes No Yes
Link
5. Drum Yes Yes Yes Yes Yes No Yes ID & No Yes
Thick-
ness
6. Down Comers Yes No No No No No No Yes No Yes
7. Evaporator Outlet Links Yes No No No No No No Yes No Yes
8. Evaporator tubes No No No No No Yes* Yes* No No Yes*
9. Economiser Tubes No No No No No Yes* Yes* No No Yes*
10. Economiser Inlet & Yes No No No No No No No No Yes
Outlet
Header
11. Economiser to Drum Yes No No No No No No Yes No Yes
Link
* To be decided based on history of failure.
# For the SH/RH headers above 400°C.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 903
316. Repairs to boiler and steam pipes.─(1) Major repairs or replacements such as
tubes, coils, headers, drums, fusion welded patches to shells, fireboxes and end plates of
boilers and extensive building up of wasted parts of boilers permitted under these
regulations, the renewal of furnaces and end plates, parts of shell, fireboxes, girders and
steam-pipes, etc., shall only be entrusted to a firm who is recognised as a repairer under
these regulations.
(2) Any firm seeking recognition shall apply in ‗Form-XIII‘to the Chief Inspector of Boilers of
the State in which the recognition is sought along with the fee specified in table 8/9.
(3) A firm seeking recognition as a repairer shall meet the following requirements depending
upon the class of boilers, namely: —
(a) For Class I boiler repairer, the owner of the firm himself shall have a degree in
mechanical or Production or Power Plant or Metallurgical engineering or the firm
shall have on its rolls a permanently employed engineer having a degree in
mechanical or Production or Power Plant or Metallurgical engineering and the
said owner or the permanently employed engineer shall also have an experience
of at least five years in an organisation engaged in fabrication, erection, repair or
maintenance and quality control of boilers; and the firm shall also have qualified
and permanently employed welders as per the provisions of these regulations;
(b) For Class II boiler repairer,the owner of the firm himself shall have a diploma in
mechanical engineering or the firm shall have on its rolls a permanently
employed engineer having a diploma in mechanical engineering and the said
owner or the permanently employed engineer shall also have an experience of at
least three years in an organisation engaged in fabrication, erection, repair or
maintenance and quality control of boilers; and the firm shall also have qualified
and permanently employed welders as per the provisions of these regulations;
(c) For Class III boiler repairer, the owner of the firm himself or a person permanently
employed with the firm shall have a minimum three years‘ experience in repair,
maintenance, operation, erection or inspection of boiler and the firm shall also
have qualified and permanently employed welders as per the provisions of these
regulations;
(d) For Special class boiler repairer, the owner of the firm himself shall have a
degree in mechanical or welding engineering along with specialised experience
in welding technology for a minimum period of three years or the firm shall have
on its rolls a permanently employed engineer having a degree in mechanical or
welding engineering along with specialised experience in welding technology for
a minimum period of three years, and have permanently employed welders as
per the provisions of these regulations who should also have valid certificate for
carrying out Tungsten Inert Gas welding;
(e)(i) Where the power stations, fertilizer plants, chemical and petrochemical plants or
refineries apply for repair of their own boilers, they shall have al (i) Where the power
stations, fertilizer plants, chemical and petrochemical plants or refineries apply for repair
of their own boilers, they shall have all the facilities in-house and may apply to the Chief904 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Inspector of Boilers of the State for permission to repair their own boilers in accordance
with these regulations;
(ii) On receipt of the application for permission to repair to a boiler, the Chief
Inspector of Boilers of the State shall reply to the request within a period of
two days of the receipt of the application.
(4) The Chief Inspector shall scrutinise and evaluate the application along with the
replies to the questionnaire and after satisfying himself that the following
requirements are fulfilled, shall recognise the firm as a repairer within a period of
thirty days, in the category applied for, namely: —
(a) that the firm possesses rectifier or generator, grinder, general tools and
tackles, dye-penetrant kit, expander and measuring instruments;
(b) that the electric arc or oxy-acetylene welding sets and all other tools and plant
in his possession for carrying out repairs are suitable for the work undertaken;
(c) that the quality of material used conforms to the specifications prescribed in
these regulations;
(d) that the supervisory and operational staff employed by the firm possesses the
necessary training and experience for the work undertaken;
(e) that all welders employed by the firm possess certificates issued as required
under Chapter-13 of these regulations;
(f) Standard of work should be of high order and comply with all the
requirements and test that may be specified by the Chief Inspector.
(5) The recognition of the firm as a repairer shall be for a period of two years and
thereafter it shall apply for renewal of its recognition at least two months before the
expiry of said period.
(6) A repairer recognised in one State shall be eligible to work in any other State by
getting his recognition endorsed from the Chief Inspector or Director of Boilers of the
concerned State on making payment of fee as prescribed in this regulation.
(7) In case the repairer is found indulging in violating the provisions of the Act or
regulations, the firm shall be blacklisted under intimation to Chief Inspector or
Director of Boilers of all the States and Union territories and Secretary, Central
Boilers Board, and renewal shall not be done in any case.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 905
TABLE 8/9
Fees for repairer to boiler and steam pipes (regulation 316)
Serial No. Class of boiler Fee for Fee for renewal Fee for
repairer recognition in of recognition in endorsement in
rupees rupees rupees
(1) (2) (3) (4) (5)
1. Special Class 15,000/- 7,500/- 5,000/-
2. Class I 10,000/- 5,000/- 4,000/-
3. Class II 5,000/- 2,500/- 2,000/-
4. Class III 2,500/- 1,250/- 1,000/-
317. Procedure for repairs.─(1)The repair work shall be carried out under the supervision
of Inspector or Competent Person and when the fireboxes and smoke tubes of locomotive
tube boilers are withdrawn, the internal parts, which are otherwise inaccessible to close
inspection, shall be inspected by the Inspector or Competent Person, as the case may be.
(2) Repair to boilers shells shall be carried out by patching or by removing a strip of worn or
damaged plate and inserting the new strip with covering straps over the longitudinal butt
ends, the strength of the riveted joints shall be not less than that of the longitudinal joints
of the shell.
(3) (a) Patches for fire exposed plates shall be fitted metal to metal without joint of any
description;
(b) The affected part shall be cut out, leaving the corners of the hole well-rounded.
(c) Patches shall be secured, wherever possible, properly spaced rivets with a width of
plate at least equal to the diameter of rivet between the edge of the rivet hole and the
edge of the plate.
(d) Where riveting is impracticable, the plate shall be secured by welt fitting countersunk
headed screw pins.
(4) The thickness of a patch plate shall not be less than the original thickness of the plate
which it is used to patch.
(5) Bulged or distorted furnaces or circular section may, if the bulge or distortion is not too
great, be pressed back to shape.
(6) Circular furnaces of horizontal boilers that have become distorted may be suitably
reinforced.906 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(7) (a) Anti-collapse rings shall be substantial section either of single or double angles
bolted back to back with screw stays not less than 22 mm in diameter and about 178
mm in pitch passed though flat of angle and screwed into the furnace, the ends being
rounded over on the fire side and fitted with nuts at the other.
(b) The stay bolts shall be fitted with ferrules not less than 25 mm in depth between
furnace and angle ring.
(8) Welding shall not be accepted for the repair of any part of a boiler for which welding is
forbidden for a new boiler under these regulations and boiler shells shall not be repaired
by welding beyond the filling up of a small isolated corroded or pitted part or the making
up of wasted edges of openings.
(9) Cracks or grooving in dished or flat end plates of cylindrical shells or in the bends of
furnace flanges in a circumferential direction may be weed out and welded.
(10) Wasted parts of circular furnaces and fireboxes and fire exposed flat plates as in
rectangular fireboxes and combustion chambers may be cut out and be replaced by new
pieces welded in or they may be built-up by welding.
(11) Longitudinal cracks in circular furnaces and fireboxes and cracks in rectangular
fireboxes and combustion chambers may be welded.
(12) No stay bar shall be welded.
(13) Smoke tubes may be butt-welded either by fusion welding, flush welding or oxy-
acetylene welding, and these may be tested hydraulically at the discretion of the
Inspecting Authority.
318. Procedure for welding during repairs. The repairer shall satisfy the inspecting
Authority :-
(1) That the electric arc or oxy-acetylene welding sets and all other tools and
plant in his possession for carrying out repairs are suitable for the work
undertaken.
(2) That the quality of material used conforms to the specification that are
prescribed.
(3) That the supervisory and operational staff employed by him possess the
necessary training and experience for the work under taken.
(4) That all welders employed by him possess certificates issued as required
under Chapter-13 of these Regulations.
(5) Standard of work shall be of high order and comply with all the
requirements and test that may be prescribed by the Chief Inspector.
319. Riveting and other repairs.─The repairer shall satisfy the Chief Inspector:-[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 907
(1) That he possesses the necessary equipment and tools and engages trained
and experienced workmen and staff for the work underwork taken.
(2) Standard of work shall be of a high order and comply with all the
requirements and test that may be prescribed by the Chief Inspector, and all
material used shall be boiler quality.
320. Miscellaneous provisions for repairs.─ (1) (a)Therepairs shall be supervised, so
far as his other duties permit by the Competent Person.
(b) When the fire boxes and smoke tubes of locomotive tube boilers are withdrawn, the
opportunity shall be taken to inspect the internal parts which are otherwise
inaccessible to close inspection.
(2) Repairs to boiler shells shall be effected either by patching or by removing a strips of
worn or damaged plate and inserting the new strip with covering straps over the
longitudinal butt ends, the strength of the riveted joints shallbenot less than that of the
longitudinal joints of the shell.
(3) (a) Patches for fire exposed plates shall be fitted metal to metal without joint of any
description. The affected part shall be cut out, leaving the corners of the hole
rounded.
(b)Patches shall be secured, wherever possible, properly spaced rivets with a width
of plate at least equal to the diameter or rivet between the edge of the rivet hole and
the edge of the plate. (c)Where riveting is impracticable, the plate shall be secured
by welt fitting countersunk headed screw pins.
(4) The thickness of a patch plate shall not be less than the original thickness of the
plate which it is used to patch.
(5) Bulged or distorted furnaces of circular section may, if the bulge of distortion is not
too great, be pressed back to shape.
(6) Circular furnaces horizontal boilers that have become distorted may be suitably
reinforced.
(7) Anti-collapse rings shall be of substantial section either of single or double angles
bolted back to back with screw stays not less than 22 mm in diameter and about 178
mm in pitch passes through flat of angle and screwed into the furnace, the ends
being rounded over on the fire side and fitted with nuts at the other. The stay bolts
shall be fitted with ferrules not less than 25 mm in depth between furnace and angle
ring.
(8) Welding shall not be accepted for the repairs of any part of a boiler for which welding
is forbidden for a new boiler under these Regulations. Boiler shells shall not be
repaired by welding beyond the filling up of a small isolated corroded or pitted or the
making up of wasted edges of openings.908 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(9) Cracks or grooving in dished or flat end plate of cylindrical shells or in the bends of
furnace flanges in circumferential direction may be weed out and welded.
(10) Wasted parts of circular furnaces and fire boxes and fire exposed flat plates
as in rectangular fire boxes and combustion chambers may be cut out and be
replaced by new pieces welded in or they may be built up by welding. Longitudinal
cracks in circular furnaces and fire-boxes and cracks in rectangular fire-boxes and
combustion chambers may be welded.
(11) No Stay bar shall be welded.
(12) For the purposes of these Regulations renewed part shall be deemed to be
parts of a new boiler intended for use at the pressure at which the boiler under
renewal is used.
(13) ForButt Welding of Smoke Tubes,Smoke tubes may be butt welded either by fusion
welding, flush welding or oxy-acetylene welding, and these should be tested
hydraulically at the discretion of the Chief Inspector.
321.Submission of manufacturing drawings and the particulars of boilers in
advance.─ (1) In the case of land boilers and boiler components including spares made in
India for use in the States, the manufacturing drawings and the particulars of materials,
design and construction of boilers shall be submitted by the makers of the boilers or boiler
components or spares, as the case may be to the Inspecting Authority of the State, where
the principal parts of the boilers will be manufactured, for examination and approval before
commencement of the manufacture of boilers.
(2) In the case of boilers and boiler components including spares made outside India for
use in the State, the manufacturing drawings and particulars of the material, design and
construction, of boilers shall be submitted initially to the Inspecting Authority in the
country of manufacture for examination and approval.
(3) The manufacturing drawings and the particulars of materials, design and construction in
the case of fired boilers of steam generating capacity 100 Tons/hour and above and that
of Waste heat boiler of 20 Tons/hour and above including boiler components and spares
thereof shall then be submitted to the Technical Adviser (Boilers) for selection of latest
materials with high strengths and use in high temperature and pressure, for the safety.
Thereafter, the manufacturing drawings and the particulars of materials, design and
construction approved by the Inspecting Authority shall be sent to the Chief Inspector of
Boilers of the State where the boiler will be installed and used, for final examination and
approval before commencement of manufacture so as to avoid questions arising at the
time of erection and registration of the boiler.
(4) The manufacturing drawings and the particulars of materials, design and construction in
the case of fired boilers of steam generating capacity less than 100 Tons/hour and that
of Waste heat boiler of less than 20 Tons/hour including boiler components and spares
thereof approved by the Inspecting Authority shall be submitted to the Chief Inspector of
Boilers of the State where the boiler will be installed and used, for final examination and[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 909
approval before commencement of manufacture so as to avoid question arising at the
time of erection and registration of the boiler.
(5) The Inspecting Authority or the Chief Inspector or both, as the case may be, shall, after
examination of the manufacturing drawings and the particulars intimate to the proposer
whether they are satisfied with materials, design, construction and fitness of the parts for
the intended pressure and, if not, what modification is necessary therein. When the
manufacturing drawings and the particulars of boilers have been approved, the
Inspector or Competent Person, as the case may be, in making his examination shall
see that the design and the particulars of construction as approved have been carefully
followed and that the material corresponds with the approved particulars.
(6) The fees for the scrutiny of the manufacturing drawings and the particulars of the
materials, design and construction of boilers and boiler components including spares
under sub-regulations (1) or (2) shall be on the scale prescribed in Table8/3 subject to a
maximum of Rs. 50,000. When the manufacturing drawings have been scrutinised and
in respect of them alterations have been suggested and the same are resubmitted for
scrutiny, separate fee at the rate of ten percent of the fee for the first scrutiny of the
drawing shall be payable, if the manufacturing drawings contain alterations other than
those previously suggested.
(7) The arrangement drawings showings the broad details of modifications or conversions
of the existing boiler shall be subject to the approval of the Chief Inspector of Boilers of
the State where the boiler is intended for modification or conversion is registered.
(8) If the detailed manufacturing drawings are got approved by the Inspecting Authority of
the State where parts will be manufactured and inspected, no separate compliance of
sub-regulation (7) is required.
Table – 8/10
Fees for scrutiny of manufacturing drawings (regulation 321)
Category Product Regulation Calculation Fee in Rs. Remarks
No. No. criteria
(1) (2) (3) (4) (5) (6)
1 Boilers, and 321(6) Heating Corresponding Fee
boiler Surface specified in
components Area regulation 305
Scrutiny
including spares
(Maximum of Rs.
50000)
2 Boilers, and 321(6) Heating 10% of Scrutiny Fee
boiler Surface
Alteration
components Area
including spares910 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
322. Inspection of pipes.─ (1) Pipes shall be inspected and hydraulically tested before
use in place, in test pressure to be that prescribed in the standard conditions for steam
pipes. A certificate from the Inspecting Authority in Form-IV(Part-B), stating that this has
been done by him may be accepted. If the Competent Person is satisfied with the test, the
pipes may be erected in position. The Chief Inspector shall intimate his approval to the
owner regarding the suitability of the pipe line for use at the pressure and temperature to be
specified.
(2) At subsequent inspection of the boiler or at any other time, the Competent Person may
make an external inspection of the steam-pipes and for this purpose may require a part of
the lagging at the flanges to be removed, and the pipe made bare. If as a result of this
inspection the Competent Person is of opinion that the pipes or any positions of then are
in an unsatisfactory condition he shall report the matter to the Chief Inspector, who may
require the whole of the lagging to be removed and may require any pipe or pipes to be
hydraulically tested. The test pressure at such hydraulic test shall be not less than one
and half times, the design pressure of the boiler or the maximum allowable working
pressure of pipe as the case may be.
(3) (a) A memorandum of Inspection Book shall be prepared in respect of steam pipe and
fittings in Form-XIV. In this book, the Inspector shall enter in ink, all particulars and
dimensions of the steam pipe and fitting with calculations for the various parts in detail,
particulars of hydraulic test and his inspection notes.
(b) At subsequent inspection, the Competent Person shall enter the date of the
inspection and hydraulic test together with notes thereon.
(c) The Competent Person shall also enter in the Memorandum of Inspection Book
remarks regarding the general condition of the steam pipes and fittings, and repairs,
replacements of alterations, if any, and the extent to which the steam pipes have
been cleaned of lagging and covering so that the book provides a useful record of the
steam-pipes and fittings for the information and guidance of Competent Person at subsequent
inspection.
(d) In the event of an accident to a pipe line or its fittings, necessary remarks shall also
be entered in the book.
(e) The Memorandum Book shall be submitted to the Chief Inspector, who will check all
particulars and calculations and approve the maximum allowable working pressure
and temperature that are to be permitted for the various parts of the pipe line and
fittings. The pressure and temperature once approved for the particular steam pipe
line shall not be altered except on a written authority from the Chief Inspector.
323. Submission of plans of steam-pipes.─ (1) Plans of steam pipes including mountings
and fittings shall be submitted with the prescribed fee to the Inspecting Authority before
construction and to the Chief Inspector at the time of registration of the boiler for his decision
whether the pipes and their arrangement comply with the regulations.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 911
(2) (a) The fees for examination of plans and the particulars of materials, design and
construction of steam pipes before the commencement of manufacture of the steam
pipes shall be at the rate specified in Table – 8/11.
(b) The fees for examination of plans and the particulars of materials, design and
construction of any fitting, mountings and for fittings like de-superheaters, steam
receivers, separators, fee shall be as specified in Table 8/11.
Table – 8/11
Fees for scrutiny of plans of steam pipes and fittings (regulation 323)
Category Product Regulation Calculation Fee in Rs. Remarks
No. No. Criteria
(1) (2) (3) (4) (5) (6)
1 Plans of Steam Pipes 323(2)(a) For 30 meters 200 Scrutiny
of piping or (Min Rs 500)
part thereof
2 Plans of Steam Pipes 323(2)(a) Based on 10% of Alteration
Scrutiny Fee Scrutiny Fee
3 Fittings, Mountings and 323(2)(b) Each 300 for each Scrutiny and
components (without Category of category alteration
heat transfer) like identical
valves, dished ends, fittings
hand hole covers, man
hole covers, flanges
etc.
4 Fittings like De- 323(2)(b) Each 500 for each Scrutiny and
superheaters, steam Category of category alteration
receivers, separators identical
fittings
Note: Scrutiny: Scrutiny of manufacturing drawings
Alteration: Alteration of manufacturing drawings
324. Inspection fee for boilers and parts thereof constructed in India.─Inspection fee
for boilers and parts thereof constructed in India shall be as specified in Table 8/12.
Table – 8/12
Inspection fee for Boilers and parts thereof constructed in India (regulation 324)
Category Product Calculation Criteria Inspection Fee Input Remarks
No. in Rs.
(1) (2) (3) (4) (5) (6)
1 Boilers Heating Surface Area HSA * Pressure 4 times the
(at (HSA) Corresponding Part Inspection fee
manufacturers Fee specified in Arrangement for renewal of
works) Reg. 305 * 4 (PPA) certificate
drawing (Reg. 305)
2 Tubes and Per metric tonne or 360 Weight in
Pipes part thereof metric tonne
3 Boilers Heating Surface Area HSA * PPA drawing 4 times the
(at site of Corresponding Inspection fee912 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Construction) Fee specified in for renewal of
Reg. 305* 4 certificate
(Reg. 305)
4 Forged Pipe <= 25 for a batch 225 Nominal At the rate
fittings mm of 50 or Bore and specified for
part thereof Batch size forged and
cast flanges
<= 25 for a batch 390
mm of 100 or (Reg.326)
part thereof
> 25 for a batch 435
mm of 50 or
<= 50 part thereof
mm
> 50 for a batch 435
mm of 25 or
<= part thereof
100mm
> 100 for a batch 465
mm of 10 or
<= 250 part thereof
mm
> 250 for a batch 540
mm of 5 or part
thereof
5 Pipe fittings <= 25 for a batch 450 Nominal At the rate
other than mm of 50 or Bore and specified for
forged pipe part thereof Batch size forged and
fittings cast flanges
<= 25 for a batch 780
mm of 100 or (Reg. 326)* 2
part thereof
> 25 for a batch 870
mm of 50 or
<= 50 part thereof
mm
> 50 for a batch 870
mm of 25 or
<= part thereof
100mm
> 100 for a batch 930
mm of 10 or
<= 250 part thereof
mm
> 250 for a batch 1080
mm of 5 or part
thereof
6 Pipe bends Per Meter 10 Length in
and tube bends (Min 300) Meter[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 913
325. Inspection fee for pipes.─Inspection fee for pipes shall be as specified in Table 8/13.
Table 8/13
Inspection fee for pipes (regulation 325)
Category Product Calculation Criteria Inspection Fee Input
No. in Rs.
(1) (2) (3) (4) (5)
1 Pipes (Inclusive of NB <= 100 For 30 500 Length in
all fittings excepting mm meters of Meter
(Min 500)
fittings like de- pipe or part
superheaters, steam thereof
receivers, feed
heaters and
NB > 100 For 30 1200
separately fired
mm meters of
superheaters) (Min 1200)
pipe or part
thereof
326. Inspection fee for valves and flanges.─Fees for inspection of valves and flanges
shall be charged as specified in Table 8/14.
Table 8/14
Inspection fee for valves and flanges (regulation 326)
Category Product Calculation Criteria Inspection Input Remarks
No. Fee in Rs.
(1) (2) (3) (4) (5) (6)
1 Valves <= 25 mm 15 per piece Nominal Min Rs.
Bore 600 per
> 25 mm 45 per piece inspection
<= 100 mm
> 100 mm 270 per piece
<= 250 mm
> 250 mm 720 per piece
2 Forged <= 25 mm for a 225 Nominal
and Cast batch of Bore and
Flanges 50 or part Batch size
thereof
<= 25 mm for a 390
batch of
100 or
part914 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
thereof
> 25 mm for a 435
batch of
<= 50 mm
50 or part
thereof
> 50 mm for a 435
batch of
<= 100mm
25 or part
thereof
> 100 mm for a 465
<= 250 mm batch of
10 or part
thereof
> 250 mm for a 540
batch of 5
or part
thereof
3 Plate <=25 mm for a 112 Nominal Half the
Flanges batch of Bore and rate as
50 or part Batch size charged
thereof for Forged
and Cast
<=25 mm for a 195 Flanges
batch of
100 or
part
thereof
> 25 mm for a 217
batch of
<= 50 mm
50 or part
thereof
> 50 mm for a 217
batch of
<= 100mm
25 or part
thereof
> 100 mm for a 232
<= 250 mm batch of
10 or part
thereof
> 250 mm for a 270
batch of 5
or part
thereof[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 915
327. Fees for inspection of components of valves.─The fees for inspection of
components of valves shall be charged as under:
(1) 50% of the inspection fees of the valves shall be charged by the chief inspector of the
state where the components of the valves, are manufactured, for inspection of the
components manufactured in a State other than the State where the valves are
assembled and remaining 50% of the inspection fees shall be charged by the chief
inspector of the state, where the valves are assembled, for inspection of assembled,
and final inspection of the valves.
(2) Where the inspection, so far as the material testing is concerned, has been carried
out by a ―well Known Foundry‖ or ―Well Known Forge‖ full inspection fees shall be
charged by the chief inspector of the state where the valves have been assembled
and finally tested.
(3) Where the components of the valves are inspected and tested in the same
manufacturing work where the valves are assembled and finally tested, full inspection
fees shall be charged by the chief inspector of the state where the manufacturing
work is located.
(4) In case, in a state, components are manufactured by one firm and finally fitting and
assembly of the valves are made by another, both the firms shall pay inspection fees
on 50: 50 basis.
328. Inspection fee for feed water heaters and other fittings.─Inspection fee for feed
water heaters and other fittings shall be as specified in Table 8/15 given below,-
Table8/15
Inspection fee for feed water heaters and other fittings
Category Product Calculation Criteria Inspection Input
No. Fee in Rs.
(1) (2) (3) (4) (5)
1 Feed Water Heaters and Per Heater 10000 Quantity
other fittings
2 De-superheaters, Steam Per Fitting 2500 Quantity
receivers and separately
fired Superheaters
329. Markings.─ (1) Carbon steel tubes or pipes which are both over 50 mm outside
diameter or over 1000 mm in length shall be marked legibly to show-
(a) The identification symbol for the type of the steel.
(b) The brand of the manufacture; and
(c) Whether seamless or electric resistance welded tubes or pipes.916 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) In the case of Carbon steel tubes or pipes less than 50 mm outside diameter or less than
1000 mm in length, the information specified in sub-regulation(1) shall be marked on a
tag securely attached to the bundle or box.
(3) For alloy steel tubes or pipes markings shall not be stamped on the body of the tubes or
pipes. The information specified in sub-regulation(1) shall be stamped on the end face of
plain end pipes or on the rims of flanges or on identification plates suitably attached to the
pipes or tubes. Inspection or identification marks may be painted on the alloy steel tubes
or pipes provided iron oxide base or titanium base paints are used.
(4) Tubes or pipes conforming to a foreign standard or code, which have been accepted
under regulation 3(2), marking shall be stamped in accordance with the provision of that
standard or code, as the case may be.
330. Inspection fee for spares and boiler components.─Inspection fee for spares and
boiler components shall be as specified in Table 8/16 as given below,-
Table8/16
Inspection fee for spares and boiler components
Category Product Calculation criteria Inspection fee in Input
No. Rs.
(1) (2) (3) (4) (5)
1 Spares and Boiler Heating Surface Area Fee specified in Heating surface
Components regulation 305 area specified
in drawing
(All types of Coils
namely Economiser
Coils, Superheater
Coils, Reheater Coils)
2 Tube and tube Bends Per Meter 10 Length in Meter
(Min Rs. 500)
NOTE :Wherever boiler components are outsourced by the main boiler manufacturer for
manufacturing in vendor works, Inspection fees need not be paid by the vendor if the inspection fees
are paid by the main boiler manufacturer.
331. Fees for examination of welders orwelding operators.─ (1) Fees for examination of
weldersorwelding operators under these regulations shall be Rs. 600 and this shall be borne
by the applicant or sponsor, as the case may be and in addition, the applicant or sponsor
shall bear all other expenses like cost of material and workshop and testing facilities as fixed
by the Competent Authority.
(2)The fee for endorsement of welder‘s certificate shall be Rs. 200 and will be borne by the
applicant or sponsor, as the case may be.
(3) Fee for issue of duplicate certificate shall be Rs. 300.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 917
332. Penalty.─(1)Whoever employs a person in welding a boiler component or steam-pipe in
contravention of these regulations, shall be punishable with penalty as per section 31 of
the Act.
(2) Any manufacturer of repairer who fails to maintain the records as required under
regulation 542shall be punishable with penalty as per section 31 of the Act.
CHAPTER-9
SAFETY OF PERSONS INSIDE BOILERS
333.Safety of persons working inside boilers.─ (1) The owner or person in
charge shall not compel or allow any person to go inside a steam boiler for
any purpose whatsoever unless the boiler is effectively disconnected from
any steam or hot water communication with any other boiler,in the manner
provided in this regulation.
(2) (a) Effective disconnection shall be made either by the removal of the boiler
stop valve or of a length of piping from all steam and hot water connection
with any other boiler, vessel or pipe containing steam or hot water by the
insertion of substantial blank flanges between the boiler stop valves and
piping.
(b) The shutting of a stop valve, stop cock or automatic isolating valve shall
not be deemed to compliance with this regulation.
(c) In the case of welded pipe work, however, if a vent pipe of not less than
50 mm internal diameter (bore) is fitted between the main stop valve and the
intermediate stop valve on the steam main and between the feed check
valve and intermediate check valve on the feed line, this regulation shall be
considered to have been complied with, provided such vent pipes are fitted
with bolted-on blank flanges and the flanges are removed so as to effectively
discharge any leakage steam or water to the atmosphere which the valves
on either side of it have been closed.
(3) The owner of a boiler to which this regulation is applicable shall obtain the
approval of the Chief Inspector in writing to the method of disconnection
which he proposes to use and shall be responsible for ensuring that the
method so approved is followed in practice.
(4) When electric light is used for work inside a boiler shell or drum or any
confined space within a boiler, the voltage shall not exceed 24 volts and the
owner of the boiler shall provide a hand lamp with lamp-guard, keyless
socket, insulated handle and extension cord of approved type.
(5) Where power is used for working any equipment inside a boiler the metallic
portion of the equipment shall be effectively earthed.918 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER-10
ELECTRODE BOILERS
PART-1
334. Application.─This Chapter applies to electrode steam boilers for all voltages for any
working pressure and for temperatures not exceeding 343°C and electrode boilers shall only
be of the following construction:
(a) Fusion welded steel boilers;
(b) Seamless shell steel boilers.
335. General requirements.─Wherever applicable, the provisions of Chapter-1 relating to
certificates from makers, Inspecting Authorities etc., and of Chapter-3 relating to construction
shall be followed.
336. Materials.─The material specifications for structural parts of electrode boilers shall
comply with Chapter-2, as regards the process of manufacture, chemical composition, mode
of manufacture and test, and the certificates for the steel plates, provided that the ultimate
tensile stress and elongation of materials shall be between the following limits: -
(a) For fusion welded construction, as mentioned in Chapter-2.
(b) For seamless construction as mentioned in regulation 250 and for seamless carbon
steel pipes as mentioned in Table 7/3 of regulation 253.
PART-2
337. Construction and workmanshipof fusion welded boilers.─Construction and
workmanship shall comply with the provision made in chapter-4 for fusion welded drums
subject to the following conditions, namely:-
(a) Class I boilers shall comply with the requirement of chapter-4;
(b) For end plate connection by welding, the type of seam shown in Fig. 10/1 of this
regulation may be adopted;
(c) Class II boilers shall comply with the following requirements;
(d) The longitudinal seam shall comply with regulation 152 and for end plate connections by
welding, any of the following types of seams may be adopted (see Figs. 10/1 to 10/6 of this
regulation).[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 919
TYPES OF WELDED JOINTS FOR
CIRCUMFERENTIAL SEAMS –
ACCEPTABLE FOR ALL CLASSES OF
BOILERS
Fig. 10/4
TYPES OF WELDED JOINTS FOR FLAT
END PLATES FOR CLASS II BOILERS
NOT EXCEEDING 508 MM DIAMETER
Fig. 10/1
Fig. 10/2
Fig. 10/5
Fig. 10/3
Fig. 10/6
All dimensions are in mm.
Notes:
1. Class I Boilers, the design pressure of which exceeds 11 kg/cm2 (g) or the product of
the design pressure in kg/cm2 (g)and the internal diameter exceeds 1400
centimeters.
2. Class II Boilers, the design pressure of which is 11 kg/cm2 (g) and below or the
product of the design pressure in kg/cm2 (g)and the internal diameter is below 1400
centimeters.
3. Types of welded joints for circumferential seams acceptable for seamless shell
boilers and for class II welded boiler for plates over 19 mm thick with gap between920 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
the edges of the plates shall be agreed upon by the Inspecting Authority and the
manufacturer.
PART-3
TESTS FOR CLASS I FUSION WELDED SEAMS
338. Selection of test pieces.─(1) From the test plate of plates on each longitudinal seam,
test pieces shall be selected for the following test, the specimens being cut out as shown in
Fig. 10/7 of this regulation and stamped by the Competent Person for identification:
(a) One Tensile test specimen for the welded seam;
(b) Two bend test specimens;
(c) One nick break test specimen
(2) The remainder of each set of test plates shall be retained for any retest required and
any specimen for retest shall be cut from the same set of test plates as the original
specimen.
Fig. 10/7: Details of Test Plates
(3) Surface of tensile and bend specimens corresponding with the outside and inside
of the shell shall be only lightly dressed so that the rolled surface of the parent metal is not
wholly removed, except that where the rolled surfaces of the abutting plates are not level
with one another, one plate may be machined at each face of the weld provided the depth of
metal removed does not exceed 0.8 mm.
339. Tensile Test.─ (a) The specimen shall be cut out transversely to the welded seam (see
Fig. 10/7 of regulation 338) and shall be of the full thickness of the plate at the welded seam
and the breadth ―W‖ shall be as large as the testing machine will reasonably allow, provided
the effective cross-sectional areas is not less than 322.5 sq.mm (see Fig. 10/8 below).
(b) The ultimate tensile stress of the welded seam specimen shall be not less than the lower
limit specified for the plate (see under regulation 37).[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 921
Fig. 10/8: Tensile Test for Joint
340. Bend Test.─ (1) (a) Two bend tests shall be made for welded seams.
(b) One specimen shall be tested with the outer surface or the weld in tension, and the other
with the inner surface in tension.
(c) The specimen shall be rectangular in section and shall be cut out transversely to the weld
so as to have a width of not less than 1½ times the thickness of the plate.
(d) The sharp corners of the specimens shall be rounded to a radius not exceeding ten
percent of the thickness of the specimen.
(2) (a) Where the plate thickness does not exceed 32 mm, the thickness of the
specimen shall be equal to the full thickness of the test plate.
(b) Where the plate thickness exceeds 32 mm, the thickness of the specimen shall
be at least 32 mm.
(c) The specimen to be tested with the outer surface of the weld in tension shall be
prepared by cutting to waste the metal local to the inner surface of the weld, so that the
desired specimen thickness is obtained.
(3) (a) The specimen to be tested with the inner surface in tension shall be prepared
by cutting to waste the metal local to the outer surface of the weld so that the desired metal
thickness is obtained.
(b) Where the thickness of the plate permits, both specimen being located in the
plate one above the other.
(c) Each specimen shall be mounted with the weld midway between the support, set
apart at a distance of not more than 5.2 times the thickness of the specimen and pushed
through the supports with a former having a diameter equal to three times the thickness of
the specimen (see Fig. 4/6 of regulation 160 of chapter 4).922 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) (a) On completion of the test, no crack or defect at the outer surface of the
specimen shall be greater than 1.5 mm, measured across the specimen or 3 mm measured
along the length of the specimen.
(b) Premature failure at corners of the specimen shall not be considered cause for
rejection (see Fig. 4/6, specimen A).
341. Nick Break Test.─ (a) The specimen shall be rectangular in section and cut
transversely to the well so as to have a width not less than one-half times its thickness.
(b) The slot shall be cut in one side of the specimen through the center of the weld and
perpendicular to the outer face of the vessel.
(c) The specimen shall then be broken in the weld and the fracture shall reveal a sound
homogeneous-weld, substantially free from slag inclusions, porosity and coarse crystallinity.
342. Retests.─ In caseany of the tests fail, two retests shall be made on specimens cut
from the same plate and both retests shall meet the specified requirements.
343. Specimens after Tests.─If required by the inspecting Authority, the specimens after
test shall be forwarded for examination.
344. Heat Treatment.─All fusion welded electrode boilers shall be stress relieved by heat
treatment and the heat heat-treatment shall be in accordance with regulation 123.
345. Hydraulic Test.─Hydraulic Testshall comply with regulation 167.
346. Determination for maximum allowable working pressure.─ (1)The maximum
allowable working pressure of cylindrical shells with fusion welded seam shall be calculated
as per the following formula:
(t - 2) x S x c Equation (10/1)
P = ------------------
D
Where,
t = thickness of shell plate in thirty- seconds of an inch,
D = internal diameter of shell in inches,
S = Ultimate tensile stress in tons per square inch,
c = 32 for Class I boilers,
c = 27 for Class II boilers,
(2) In no case, the thickness of cylindrical shells with fusion welded seams shall be less
than those in table below:
Table 10/1: Minimum Thickness for fusion Welded Shells
Serial No. Class Internal diameter (mm) Minimum thickness (mm)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 923
(1) (2) (3) (4)
1 II (a) Upto and including 610 6
(b) Over 610 upto and including 914 8
(c) Over 914 10
(3) In no case, the factor of safety of the cylindrical shell and ends shall be less than 4.
347. Welds and compensation for manholes and branches.─Welded compensating ring
fitted to manhole and over opening shall conform to Figs. 10/9 to 10/13.
Fig. 10/10: Internal Compensating Ring
Fig.10/9: External Compensating Ring
Fig. 10/12: Elliptical Pressed Manhole in
Fig. 10/11: Elliptical Manhole Flanged Frame
Dished End Plate
Welded to Shell924 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 10/13: Elliptical Manhole Frame Welded to Dished End Plate
All dimensions are in mm.
348. Manholes and other opening in shells.─ (a) Manholes and other opening in boilers
shall be placed away from any welded seamand Oval opening shall be arranged with their
minor axis parallel to the longitudinal center line of the boiler.
(b) Un-compensated and compensated openings shall comply with regulation 179.
349. Dished end plates with pressure on concave side.─This shall comply with
regulations174, 176 and 177.
350. Unstayed flat end plates.─ (1) The working pressure of unstayed flat-end plates shall
be determined as per the following formula:
2S(t - 2)² Equation (10/2)
P = -------------
D²
where, t = thickness of plate in thirty-seconds of an inch,
P = working pressure in pounds per square inch,
D = diameter in inches of the pitch circle of the bolts or rivets when the
plate is attached to an outside flange or the internal diameter of the shell when the
plate is attached to an inside flange,
S = minimum tensile stress of the plate in tons per square inch.
(2)In no case the thickness of an unstayed flat-end plate shall be less than 10 mm.
(3) Compensation is not required where an unstayed flat-end plate is pierced for electrodes
or other fittings by opening having a diameter not greater than 63 mm and the pitch of the
openings is not less than four times of the diameter of the openings.
(4) Where the diameter of the opening in an unstayed flat end plate is greater than 63 mm or
the pitch is less than four times the diameter of the holes, full compensation shall be
provided as in regulation179.
351. Seating and Mounting.─ (1) Where the working pressure is not greater than 18
Kg/Cm², mountings having screwed ends not exceeding 19 mm, standard pipe thread may
be used.
(2) The mountings may be screwed.─
(a) directly into the boiler shell plates, nuts being fitted on the waterside; or
(b) into steel distance piece(see Fig. 10/14) the length of thread engaged being
is no case less than the bore of the mounting plus 6 mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 925
Fig. 10/14: Typical mild steel Distance piece for mountings
(3) (a) The distance piece shall be made solid from mild steel and shall be screwed
into the boiler pieces and fitted with nuts on the water side.
(b) The walls of the distance plates shall be not less than 6 mm in thickness at the
bottom of the thread.
(4)Where casting are fabricated by fusion welding, they shall be stress-relieved heat
treatment before attachment to the boiler.
(5) Method of attachment by welding of connectors to shells are shown in Figs 10/15
to10/19 of this regulation.
(6) (a) Water gauges and pressure gauge syphons may be attached direct to the
boiler shell or ends without the intervention of a pad or standpipe, provided they are
flanged and secured by studs.
(b) Nuts of full thickness shall be fitted on inside of the boiler, if the studs are
screwed through the plate.
(7) Where the design pressure exceeds 18 Kg/cm² or the nominal bore of the
mounting exceeds 19 mm,mountings shall be attached by short standpipes or pads.
(8) Flanges and pads in contact with the boiler shall be formed to bed closely to the
plate to which they are attached.
(9) (a) (i) Where short standpipes are used, the flanges shall be machined on the
jointing and bolting surfaces and shall be close to the plate.
(ii) The caulking edge of the flange shall be machined or flame cut by machine.
(iii) Where separate flanges are fitted they shall be attached as shown in Figs.
7/10,7/26, 7/27 and 7//32 of chapter 7.
(b) Standpipes fabricated by fusion welding shall be stress-relieved by heat treatment
before attachment to the boiler.Where the outside diameter of a standpipe is not
greater than 127 mm plus twice the thickness of the shell plate in mm, the standpipe
may be secured by fusion welding in the manner shown in Figures 10/20 and 10/21
of chapter 10 without subsequent stress-relieving by heat treatment.
(c) Where minimum weld attachment for standpipes bore is 127 mm and under, with
plate thickness(Ts) equal to 1.5 Tn or greater as shown in Fig. 10/20 and 10/21,
minimum weld attachments for standpipes shall not require compensating plates.926 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(d) Where the outside diameter of the standpipe exceeds 127 mm plus twice the
thickness of the shell plate, the standpipe may be secured by fusion welding as
shown in Figs. 10/22, 10/23, 10/24 and 10/25 of chapter 10 and the standpipe and
the entire plate to which it is attached shall be
stress-relieved by heat treatment.
(e)Standpipes shall be designed to
withstand the internal pressure, but additional
thickness may be required for:
(i) Compensation (see regulation 179).
(ii) Stresses imposed on the standpipe
by expansion and contraction of externally attached
pipe work.
(f) The thickness of the standpipe shall be not less
than 6 mm or that given by the following
formulae,whichever is the greater:
(i) for working pressure upto and
including 250 lb./sq. in., t = D+4
(ii) for working pressure above 250
lb./sq. in., t = 1.4 D + 6
where,
t = thickness of standpipe in thirty-
seconds of an inch,
D= outside diameter of the standpipe in
inches.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 927
352. Hydraulic Test.─The hydraulic test shall comply with sub-regulation (1)
ofregulation298.
PART-4
SEAMLESS SHELL BOILERS
353. Determination of maximum allowable working pressure.─(1) The maximum
allowable working pressure shall be determined as per with regulation 346 except the
minimum thickness of the shell shall be as mentioned in the following table: -
Table 10/2
Serial No. Internal diameter in mm Minimum thickness in mm
(1) (2) (3)
1. Upto and including 610 6.3
2. Over 610 upto and including 8928 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
914
3. Over 914 10
(2) In no case the factor of safety of the cylindrical shell and ends shall be less than 4.
(3)The value of ―c‖ in the equation shall be taken as 35.
(4) Where the ends are welded to shell or mechanically secured and welded, they shall be
stress-relived.
354. End Plates.─ (1) The end plates shall comply with regulations174,176 and 177 or 350
as the case may be depending upon they are dished or flat .
(2) When end plates are mechanically secured and welded to seamless shell as shown in
Figs. 10/4 and 10/5 of chapter 10 and the welded are stress-relived, the pressure and other
limitations specified in respect of class II boilers in regulation 337 shall not apply.
355. Manholes and others opening in the shells.─These shall comply with regulation 179
.
356. Mounting, fittings and connections.─(1) For all types of electrode boilers,
mounting, fitting and connections shall comply with regulation 181for all types of electrode
boilers.
(2) For electrode boilers, one means of indicating water level of the tubular glass type
water level gauge and one means of feeding the boilers shall be sufficient and the safety
valves shall be spring loaded type.
(3)If an Electrode boiler is fitted with a magnetic valve, the said valve will be accepted
in lieu of the second safety valve provided the source of power supply to both the valves and
the boiler are the same and both are operated by one signal switch.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 929
CHAPTER -11
STANDARD CONDITIONS FOR THE DESIGN AND CONSTRUCTION OF
ECONOMISERS, FEED PIPES, FEED HEATERS AND OTHER SIMILAR
VESSELS
PART-1
ECONOMISERS
357. Application of standard condition and exceptions thereto.─ (1) An economiser
shall not be registered under sub-section (5) of section 12 of the Act and a certificate shall
not be issued under sub-section (6) of that section with reference to an economiser unless
the standard conditions in respect of material design and construction, which are specified in
this chapter are satisfied in respect of such economiser.
(2) Notwithstanding anything contained in sub regulation (1), the chief Inspector may,
subject to the provisions of regulation 359, register an economiser and order the issue of a
certificate authorising the use thereof, although the standard conditions are not fully satisfied
in respect of such economiser.
358. General requirements.─ (1) All cast iron and steel headers and parts used in the
assembly of an economiser shall conform to the requirements of this Chapter in respect of
material specification and test workmanship and structural requirements.
(2) All economisers shall beconstructed under the supervision of an Inspecting Authority
and shall be so certified by that authority.
(3) A certificate from the Inspection Authority in Form--XV certifying that material was
tested and the economizers built under their supervision shall be furnished to the
chief inspector before or with the first application for registration.
(4) In advance or along with application for registration, the following shall be furnished:-
(a) A certificate of manufacture and test in Form-XVIsigned by the maker or by a
responsible representative of the Maker, containing the description of the
economiser, particulars of the materials used in its construction and the dimensions
of the several parts with the declaration that the limits oftensile breaking strength
and tests comply with the standard conditions.
(b) A certificate from the maker of the material stating the tensile breaking strength and
the elongation provided that if the maker and manufacturer be the same, the
manufacturer‘s precise statements showing the above information shall be
accepted.
(5) To suit owners‘ convenience, wherever possible it is recommended that economiser
be installed in two or more sections.
359. Modification of formula.─Where no certificate is produced, the maximum allowable
working pressure as found by formula will be reduced by 10%. However, when the
workmanship is doubtful in any way and the chief Inspector is not satisfied that any of the930 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
foregoing conditions would be sufficient to meet the circumstances, he may at his discretion
reduce the maximum allowable working pressure by such percentage as he deems fit.
360. Maker’s certificate for steel economisers.─The maker shall furnish a certificate to
the Competent Person in the following form:
We hereby certify that the material described below has been made by the Open Hearth
or an Electric process acid/basic and has been satisfactorily tested in the presence of
the Competent Person in accordance with the standard Tests.
361. Hydraulic test for new economisers.─(1) The hydraulic test for all new economisers
shall be conducted as per Table11/1 given below,─
Table 11/1
Serial No. On components before Maximum allowable Hydraulic test pressure in
assembly working pressure in kg/cm2 (g)
kg/cm2 (g)
(1) (2) (3) (4)
1. Cast Iron tubes, headers Twice Maximum allowable working pressure. Minimum
and bends pressure 49.
2. Steel tubes and bends 35 or less 70
3. Steel tubes and bends Above 35 but not Twice the Maximum
exceeding 70 allowable working pressure
4. Steel tubes and bends Above 70 70 above the Maximum
allowable working pressure
5. Headers Below 70 Twice the Maximum
allowable working pressure
6. Headers Above 70 Maximum allowable
Working pressure plus 70
kg/cm2 (g)
(2) For all assembled sections, the hydraulic test pressure shall not be less than 1.5
times of the maximum allowable working pressure.
(3) Maximum allowable working pressure shall be the highest pressure at which the
economiser relief valves are to be set.
(4) The above test pressure shall be held for a minimum period of ten minutes.
362. Workmanship and manufacture.─All materials used in the construction of pressure
parts shall be tested and shall conform to the following requirements:-
(i) The workmanship shall be of highest standard. All castings shall be well finished, free
from defects, porous places and blow holes, and true to dimensions without warping.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 931
Where chaplets are used, there shall be satisfactory fusion with the metal and
chaplets shall be properly tinned with metalfree from lead.
(ii) The screw threads of all bolts shall be of whitworth forms.
(iii) Wherevernecessary,all component parts shall be manufactured to limit gauges to
secure interchangeability throughout.
PART-2
CAST IRON, TUBES AND HEADERS
363. Process of manufacture.─(1) (a) The castings shall be cast from metal melted or
refined in any suitable metallurgical plant other than an iron ore smelting furnace.
(b) The minimum test results required on test bars 30 mm in diameter shall be as per
Table11/2 given below, ─
Table 11/2
Serial No. Material for tubes and Minimum tensile Transverse test on span of 45.8 cm
other pressure parts strength in
kg/mm2
(1) (2) (3) (4) (5)
1. Minimum transverse Minimum
breaking load in kg deflection in cm
2. Grade 16.5 23.2 1,052 0.434
3. Grade 14 iron 19.7 934 0.407
4. Grade 12 iron 16.9 839 0.382
Note: Grade 16.5, 14 and 12 iron correspond to 23.2, 19.7 and 19.9 kg /mm2 minimum tensile strength
respectively.
(2) On analysis, the sulphur and phosphorus contents shall not exceed the percentages
given in Table 11/3 below, ─
Table 11/3
Serial No. Components Maximum Sulphur Maximum
percentage Phosphorus
percentage
(1) (2) (3) (4)
1. Tubes 0.15 1.00
2. Headers 0.15 1.00
(3) (a) Minimum manganese content shall be related to sulphur content by the following
formula:-
(% Sulphur x 1.7) + 0.3 = % Manganese.932 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) It shall be shown to be satisfied by routine quality control Laboratory analysis and In
any case, the manganese shall not be less than 0.5 per cent and shall be within the
range 0.50 - 0.90 percent.
(c) Phosphorous content shall be kept as low as economically possible but in no
circumstances it shallexceed 1.0 per cent.
364.Test bars.─ (1) (a)When test bars are cast separately, they shall be poured at the same
time and from the same ladle of metal as the casting or castings they represent.
(b) The number of test bars specified in regulation 365 shall be applicable to all casting of
each melt.
(2) When the bars are cast on the mould for the casting and the mould for the test piece
shall be joined together in such a manner that the liquid metal fills both moulds at the
same operation.
(3) All test bars shall be cast in the same type of sand moulds viz. green sand or in loam
or dry sand as used in casting or castings they represent.
(4) The test bar shall not be subjected to any heat treatment after leaving the moulds
except where the castings are heat treated.
365. Number of tensile tests.─ (1) The number of tests required for each batch of castings
shall be as per the table 11/4 given below where the castings have been divided in four
groups and tests required have been mentioned there in, ─
Table 11/4
Serial No. Group Weight of casting Test requirements
(1) (2) (3) (4)
1. 1 Up to 13 kg One test for each 1524 kg
of casting or part thereof.
2. 2 Over 13 kg and up to 50 kg One test for each 2000 kg
of castings or part thereof.
3. 3 Over 50kg and up to 1000 kg One test for each 3000 kg
of casting or part thereof.
4. In the Groups 1,2 and 3, all castings represented by one test shall be poured
from the same ladle of same heat as the bar or bars provided for the test.
5. 4 Over 1000 kg and important One test for each 4000 kg
castings of castings or part thereof
or for each casting
weighing 4000 kg or more.
(2) Conditions for acceptance and for rejectionshall be as under:
Table 11/5[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 933
Serial Test Result Conclusion
No.
(1) (2) (3) (4)
1. 1st Pass The batch or separate casting represented
shall be accepted.
2. Tensile or Transverse test Two more tests shall be made.
fails
3. 2nd If both pass The batch or separate casting represented
shall be accepted.
4. If either fails The batch or separate castings represented
shall be rejected.
Provided that, in the case of failure of any test piece showing obvious casting
defects, another test piece shall be taken from spare test bars or cut from a casting from the
same batch and the results obtained from this shall be substituted for those results obtained
from the defective test bars.
366. Standard test piece.─ (1) The tensile test bar shall conform to the dimensions shown
in the Figure 11/1 given below and bars may be tested with either plain or screwed ends, ─
Fig. 11/1
Table 11/6
B D A P R C E F L L
p s
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
mm mm. mm mm mm mm mm mm mm
mm
29 SF
30
20 13 51 89 51 29 SW 29 210 149
(2)The test bars shall be cast as cylindrical bars of the diameters given in Column (1)
and machined to the dimensions given in Columns (2)&(4) in the above Table.934 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
PART-3
CONSTRUCTION REQUIREMENTSFOR CAST IRON ECONOMISERS
367. Design requirements.─The manufacturer, on the basis of design details, shallsatisfy
the Inspecting Authority regarding the design and the strength of all parts of cast iron
economisers subject to the following maximum allowable working pressures:
Table 11/7
Serial Type Max allowable working
No. pressure in kg/cm2 (g)
(1) (2) (3)
1. Ordinary Vertical Tube 22.8
2. Ordinary Vertical Tube with Strengthened Tubes 26.3
3. Ring Stay Vertical Tube 33.3
4. Gilled Tube Type approved Design 45.7
368. Joint bolts and studs for cast iron economisers.─(1) The maximum allowable
working pressure for the bolts and studs shall be calculated as perregulation 375.
(2) The use of studs tapped into cast iron shall be permissible where;
(a) The studs and nuts are not in the path of the flue gases;
(b) The studs are carefully threaded to gauge and fitted into tapped holes of ample
depth.
(3) For economiser of gilled tube type of approved design made from 16.5 grade iron,
the limitation for a maximum allowable working pressure may be increased to 52.7 kg/cm2
(g).
369. Economiser water outlet temperature.─The design condition shall be such that the
maximum outlet water temperature of the economiser shall be at least 22°C below the
saturated steam temperature in the boiler drum:
Provided that this requirement shall not apply to economizers used on low pressure
water heating system working at pressure less than 36.5 m head of water.
PART-4
CONSTRUCTION REQUIREMENTS FORSTEEL ECONOMISERS WITH OR
WITHOUT CAST IRON SLEEVES ON THE TUBES
370. Construction ofTubes.─ (1) The tubes shall be manufactured as perregulation 122.
(2)Suitable provision shall be made for supporting horizontal tubes at one or more interval
in their length to relieve bending stresses and these supports as well as the end connections
shall permit free expansion.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 935
371. Maximum allowable working pressureof tubes.─The maximum allowable working
pressure of the tubes shall be calculated as per sub-regulation (1) of regulation 244, but the
working metal temperature shall be taken as the maximum water temperature for which the
part of the elements is designed plus 11°C.
372.Construction ofheaders.─(1)The headers shall be constructed in accordance with
regulation 125.
(2) Branches shall be secured by one of the following methods, namely: -
(a) Expanded, belled and welded.
(b) Strength welded with additional securing means.
(c) Full depth strength weld.
(d) Branches less than 51 mm bore may be screwed and seal welded.
(3) Open ends of forged seamless steel tube headers may be closed by forging, or the
ends may be secured by bolting, screwing, or welding in an approved manner.
373. Maximum allowable working pressure of headers.─(1)The maximum allowable
working pressure of rectangular headers shall be calculated as per regulation 246.
(2) The maximum allowable working pressure of cylindrical headersshall be calculated
as per regulations 169 and 170.
374. Attachment of tubes to headers.─(1)Tubes shall be connected to the tube plates by
one of the following methods, namely:-
(a) Expanding with bell mounting or seal welding.
(b) Strength welding.
(c) Mechanical bolted joint.
(2) Roller expanded tubes shall project through the neck or bearing part in the holes by
at least 6 mm and shall be secured from drawing out by being bell mouthed to the
extent of 0.8 mm for each 25 mm in diameter plus 1.6 mm.
(3) (a) Tubes expanded into headers may be seal-welded inside or outside the header.
(b) Where a seal weld is provided inside the header, the tube end projection and bell
mouthed specified in sub-regulation (2) is not required.
(4) In the case of roller expanded tubes the tube holes in the headers shall be formed in
such a way that the tubes can be effectively tightened in them, there shall be a neck
or belt of parallel seating of at least 13 mm.
(5) Where the tubes are strength welded direct to the headers, the technique followed
shall be approved by the Inspecting Authority and all welds shall be suitably heat
treated.936 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) Bolted joints shall be designed as per regulation 375.
(7) Tubes spacers supporting clips and lugs may be welded to the tubes.
(8) The tubes shall be so arranged that they are accessible for cleaning internally and
externally.
PART-5
375. Bolts, studs joints and Flanges.─ (1) The maximum allowable working pressure for
the bolts shall as per the following formula, ─
2
N x C 1.28
P = ------- D - -------- Equation (11/1)
A n
Where,
N = No. of bolts securing the parts,
n = No. of screws threads per inch,
D = Bolt diameter in inches measured over the threads,
A = The area exposed to pressure which is assumed to be bounded by a line
midway between the pitch line of the bolts and the inner edge of the flange
where flat joints are used with joints rings. Where conical joints faces are
used with joint rings, of curvilinear cross-section, the area exposed to
pressure shall be assumed to extend to the root of the thread where the tube
ends are screwed, or to a corresponding boundary if the flanges are attached
by other means.
C = 4,700 for steel bolts or studs of 28 tons/sq.in.minimum ultimate tensile stress
where the diameter over thread is less than 3/4 inch,
C = 5,100 for steel bolts or studs of 30 tons /sq. in. minimum ultimate tensile
stress where the diameter over thread is less than 3/4 inch.
C = 5,600 for steel bolts or studs of 35 tons /sq. in. minimum ultimate tensile
stress where the diameter over thread is less than 3/4 inch.
C = 5,600 for steel bolts or studs of 28 tons/sq. in. minimum ultimate tensile
stress where the diameter over thread is not less than 3/4 inch and not
greater than 7/8 inch.
C = 7,000 for steel bolts or studs of 28 tons/sq. in. minimum ultimate tensile
stress where the diameter over thread is greater than 7/8 inch.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 937
Where the bolts or studs used have a tensile strength exceeding 32 tons sq.
in., a plate shall be permanently fixed to the economiser structure in a prominent
position drawing attention to this fact in case replacements of bolts or studs are
necessary. In no case shall the nuts be exposed to the action of the flue gases.
(2) The thickness of each flange shall be not less than that given by the following
equation:
[P.D. (D - D)]
1
t = ------------------ Equation (11/2)
2
Where,
t = Thickness of flange in thirty-seconds of an inch.
P = Maximum Allowable Working pressure, in lbs. per square inch (gauge)
D = Outside diameter of the tube in inches.
D = Pitch circle diameter or bolts or studs in inches.
1
Provided that such flange is cast integral with the body and with the appropriate
internal corner radius.
In no case, however, the thickness of a flange shallbe less than 24 thirty -seconds of
an inch.
PART-6
376.Valves and mountings.─ (1) All economisers shall be provided with thermometers for
measuring water temperature adjacent to the inlet and outlet connections.
(2) (a)A valve which shall prevent increase of pressure beyond a predetermined limit shall
be fitted to every economiser and the design shall provide against unauthorized
interference with the loading. Economisers with pressure parts of cast iron and arranged
in groups of tiers connected by circulating piping shall have a relief valve fixed on each
group or tier. Relief valves shall have a minimum orifice diameter of 19 mm.
(b)The relief valve capacity shall be calculated on the basis of economiser thermal
capacity.
(3) Pressure gaugefor indicating the pressure in the economiser shall be constructed as per
regulation 232.
(4) Air release valvesshall be provided for the release of air at all points where air
accumulation may occur.
(5) Blow off drain valvesshall be provided for complete drainage of water in the economiser.938 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) Economiser provided with means for heating the incoming feed by mixing it with hot
water from the economiser outlet,shall have a non-return valve in the hot water return
line.
(7)In every case, a reserve flue shall be provided for by passing the flue gases when no
water is being fed to the boiler through the economiser where it is not integral with boiler.
(8) To relieve the economisers of excessive pressure accumulation due to internal explosion
doors preferably of horizontally hinged ‗self-sealing‘ type shall be fitted.
(9) All valves and mountings shall satisfactorily withstand a hydraulic test to the same
pressure as will be applied to the economiser during its registration.
(10)Alternative means of feeding the boiler other than through the economiser shall be
provided.
(11) A non-returnvalve shall be provided in the hot feed line between the economiser and the
boiler to prevent the discharge of steam or water from the boiler into the economiser.
PART-7
FEED PIPES
377.Maximum allowable working pressure for feed piping .─The maximum allowable
working pressure shall be the maximum pressure generated in overcoming friction and other
losses in the feed piping under ordinary working conditions, or the maximum pressure which
can be generated by the boiler feed pumps unless special provision is made to prevent that
pressure being communicated to the pipe line.
Note: For boilers operating at design pressure 100 kg/cm2 (g) and above feed water discharge
piping for feed water system without economizer inlet isolating valve can be designed based
on boiler design pressure with provision of mechanical relief device or a three way valve for
bypassing H.P Heater, to prevent Boiler Feed Pump (BFP) shut off pressure being
communicated to the piping system and with such a feed water system, boiler shall be hydro
tested up to the last isolation valve in the feed water line.
378. Steel feed pipes.─Steel feed pipes shall be in accordance with chapter -7.
379. Feed Heaters and similar vessels fitted to feed pipes.─(1)(a) If welded construction,
such vessels shall comply with the requirements of Chapter-12, provided that radiographic
examination of welds may be waived for pressure not exceeding 17.5 kg/cm2 (g).
(b) For parts of vessels of composite construction, the requirements of the appropriate
regulations of the above Chapters shall be complied with as may be applicable to each such
part.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 939
(2) Maximum allowable working pressure of all parts shall be determined as per appropriate
formulae given in these regulations and due consideration shall be given to the following
additional points while calculating the stresses, namely. ─
The stresses due to self-weight of vessels and its contents, any super-imposed
vessel or other equipments, pipes and other similar parts attached to the vessels,
insulation and stresses due to static head, if any.
(3) Every such vessel shall be protected with a relieving device of sufficient capacity to avoid
over pressure in case of internal failure.
(4) Inspection during construction, stamping and testing shall comply with the appropriate
regulation of chapter-1.
PART-8
REGISTRATION AND INSPECTION OF ECONOMISER AND FEED PIPES
380. Preparation for inspection.─ (1) (a)At each inspection, the economiser shall be
emptied and thoroughly cleaned internally and externally and in the flues.
(b) All mountings shall be opened up and all caps, doors and blank flanges removed to
permit adequate inspection.
(2)The owner of an economiser to which this regulation is applicable shall obtain the
approval of the chief inspector in writing to the method of disconnection which he proposes
to use and shall be responsible for ensuring that the method so approved is followed in
practice.
381. Procedure for registration.─ (1) On receipt of an application for registration,the
Inspector after the economiser has been prepared for examination,shall take full particulars
of the design and ascertain the maximum allowable working pressure allowed by the
regulations.
(2) The fitness of the economiser parts shall be determined as per the following formulae:
(a) ForHeaders of approximately rectangular cross –section:–
C (t - 2)
P = ------------- Equation (11/3)
b2
Where,
t = Thickness in thirty-seconds of an inch.
b = Distance between the sides of header supporting the surface, in inches.
P = Maximum allowable working pressure, in lbs. per square inch (gauge),
C = 11 where the water side surface is flat.
= 22 where the water side surface is curved, provided that the curvature is
continued without interruption and the thickness at each end of the side is not
less than that determined with C = 11.940 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
In no case, however, shall the thickness of the side of a header be less than
16 thirty-seconds of an inch at any part.
(b) ForHeaders of approximately circular cross-section :–
0.6K (t - 5)
P = -------------- Equation (11/4)
D
Where,
t = thickness in thirty-seconds of an inch.
P = Maximum allowable working pressure, in lbs. per square inch (gauge),
D = Outside diameter of header in inches.
K = 265 for Grade 16.5 Iron
= 240 for Grade 14 Iron
= 220 for Grade 12 Iron
The minimum thickness of plain cylindrical portions of header in that part of the
length which does not contain tube holes shall comply with the requirements of clause (d).
In no case, however, shall the thickness at any point may be less than 16 thirty-
seconds of an inch.
(c) ForTubes :–
K (t - c)
P = ----------- Equation (11/5)
D
Where,
t = Thickness in thirty-seconds of an inch.
P = Maximum allowable working pressure, in lbs. per square inch (gauge),
D = Outside diameter of tube in inches.
K = 265 for Grade 16.5 Iron,
= 240 for Grade 14 Iron,
= 220 for Grade 12 Iron,
C = 4 for portion where gills act as reinforcement.
= 5 for portion not reinforced.
In no case, however, shall the thickness at any point may be less than 11
thirty-seconds of an inch.
(d) For Manifold pipes-
0.8K (t - 5)
P = --------------- Equation (11/6)
D[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 941
Where,
t = thickness in thirty-seconds of an inch
P = Maximum allowable working pressure, in lbs. per square inch (gauge),
D = Outside diameter of pipes in inches,
K = 265 for Grade 16.5 Iron,
= 240 for Grade 14 Iron,
= 220 for Grade 12 Iron.
In no case, however, shall the thickness of a manifold pipe or branch be less
than 14 thirty-seconds of an inch.
(e) ForCast iron economisers with extended surface horizontal tubes, connector
bends: –
K (t - 5)
P = --------------- Equation (11/7)
D
Where,
t = thickness of bend in thirty- seconds of an inch.
P = Maximum allowable working pressure, in lbs. per square inch (gauge).
D = Outside diameter of bend in inches.
K = 265 for Grade 16.5 Iron
= 240 for Grade 14 Iron
= 220 for Grade 12 Iron.
In no case, however, shall the thickness of a connected bend be less than
10.3 mm (13 thirty-seconds of an inch ) for 18.75 kg/cm2 (g) (12.0 tons sq. in.) and
22.00 kg/cm2 (g), (14.0 tons/sq. in.) Grade irons and 9.0 mm (11 thirty-seconds of an
inch), for 26.00 kg/cm2 (g) (16.5 tons/sq. in.) Grade iron.
(f) Tubes to comply with equation (11/5).
(g) Manifold pipes to comply with equation (11/6).
(3) The Inspector shall enter full particular of the economisers together with the required
calculations of various parts in a Memorandum of the Inspection book (Form-XVIII)
and submit it to the Chief Inspector.
(4) If no formula or co-efficient applicable to any part, other than what is mentioned
above, is contained in the regulations, the Chief Inspector shall at his discretion
determine the fitness of the part.
(5) After inspecting the economiser and ascertaining, the maximum working pressure to
which it may be worked, the Inspector shall witness the hydraulic test as per
regulation 383 and may issue a provisional order in Form-XVII.942 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) If the requirements of provisional order under sub-regulation(5)are not fulfilled, fresh
provisional orders shall be issued subject to a maximum period of twenty four
months from the date of issue of first provisional order, without any subsequent
inspection and payment of fee.
382. Procedure at subsequent Inspection.─ (1) (a)After economiser has been cleaned,the
Competent Person shall make a thorough examination so far as its construction permits.
(b) The external condition of the tubes shall be carefully noted for wasting especially at the
feed inlet end and all accessible tubes shall be calibered.
(c) The internal surfaces of cast iron tubes shallbe closely observed for graphitic wasting as
far as it is possible and in the event of any tube failure,these shallbe broken up for scrutiny
so that the general internal condition of the other tubes may be estimated.
(2) Where tubes or other parts are wasted, the strength shall be re-calculated.
(3) The scraper gear shallbe examined to note if any parts are missing, if the length of
travel is adequate and if the scrapers are correctly adjusted.
(4) All cap bolts shall be inspectedand also the condition and position of the dampers
and baffles.
(5) The record of each inspection and calculations shall be entered in the Memorandum
of Inspection Book.
383. Procedure for Hydraulic Test.─(1)Every economiser for registration shall be
hydraulically tested in the presence of Inspector to 1½ times the maximum allowable working
pressure. Hydraulic tests of economisers at subsequent examination when required by the
Competent Person,shallbe made after the inspection.
(2) The test pressure to be applied to economisers at subsequent examinations shall be
from 1.25 to 1.5 times the maximum allowable working pressure of the economisers. During
the test, all parts externally and in the flues shall be noted for leakage.
384. Memorandum of Inspection Book .─ (1) A Memorandum of Inspection Book shall be
prepared for each economiser in Form-XVIII and the Inspector shall enter all particulars in
ink and dimensions of the economisers with the particulars of hydraulic test and his
inspection notes in this book;
(2) At subsequent inspection, Competent Person shall enter the dates of the
Inspections, hydraulic tests when such are made with their notes pertaining to the
condition of the various parts;
(3) the Inspector or Competent Person, as the case may be, shall also enter in the
Memorandum of Inspection Book, the general condition of the economiser and of
repairs;[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 943
(4) (a) On submission of the Memorandum Book to the Chief Inspector, he will in the
case of newly registered economisers, check all particulars and calculations and
approve the design pressure that is to be permitted.
(b) In the case of old economisers, the Chief Inspector shall examine the Inspector‘s
notes of inspection and proposals made for repairs.
(c) A pressure once approved for the economiser shall not be altered without the
written authority of the Chief Inspector.
(d)The Memorandum of Inspection Book shall be kept clean and up-to-date and the
Inspection Book except when actually required by the Competent Person, shall be
kept in the office of the Chief Inspector.
385. Registration book.─ (1) A registration book or copy of memorandum of inspection
book for economiser containing all the particulars required for registration shall be
maintained in the office of the Chief Inspector in Form-XVIII and any orders passed by him
regarding the economiser shall be entered in the registration book under his initials.
(2) The Chief Inspector shall also see that the note of subsequent inspections entered in the
Memorandum of Inspection Book are copied in the Registration book.
386.Transfer of memorandum of inspection book and registration book - On transfer of
an economiser from one state to another, the memorandum of inspection and registration
book shall, on the request of the Chief Inspector of the State to which the economiser has
been transferred, be forwarded to that Officer who shall take over their custody and maintain
them as prescribed.
387. Grant of certificate.─A certificate for the use of an economiser shall be granted in
Form-XIX.
388. Casual visits.─ (1) The Inspector shall notethat the economiser is working
satisfactorily, the relief valves are correctly adjusted, the scraper gear is operating and the
external brick work is free from cracks.
(2) He shall also ascertain that the maker‘s instructions for working are being strictly
followed by the owner.
Note: It is recommended that the feed inlet temperature to the economiser shall not be less
than 38°C, to prevent sweating and consequent external corrosion of the tube and bottom
headers.
389. Economiser rating.─The rating shall be equivalent to the area of the heating surface
in square meters which shall be computed from the tubes and the headers.
390. Registration fee.─An application for registration of Economiser shall be accompanied
by appropriate fee as specified in regulation 304.
391. Fee for renewal of certificate.─An application for renewal of certificate of registration
of economiser shall be accompanied by appropriate fee as specified in regulation 305.944 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
392. Engraving of registry number.─(1)(a) Every economiser shall have a plate with its
registry number engraved, secured in a conspicuous place and wherever practicable
stamped for identification with that number in a prominent place.
(b) The engraving shall be done within a period of thirty daysfrom the date of receipt of the
registry number.
(2) A letter ―E‖ shall be prefixed to the registry number in the denominator of the appropriate
device as shown in regulation 301.
Example: UP
E-53
(3) The engraving shall be completed and ready for verification within thirty days from the
date of receipt of the engraving slip from the Chief Inspector of the State.
(4) (a) Economisers having registry devices different from those prescribed in sub-
regulations (1) and (2) shall have such devices crossed out or erased and engraved a
newregistry number in conformity with those prescribed in the aforesaidsub-regulations.
(b) The original numbers of such economisers shall be retained in the new device,
provided that in the case of economisers operating in an area which consequent upon the
reorganization of State forms part of another State, new numbers shall be given by the
Chief Inspectors of the State.
(c) A number once allotted shall not be used again in another economiser.
393. Inspection of feed pipes.─(1) (a)Feed pipes shall be inspected and hydraulically
tested before erection in place, and the hydraulic test pressure shall be not less than twice
the maximum allowable working pressure of the economiser.
(b) A certificate from the recognized maker or Inspecting Authority certifyingthat this has
been done may be accepted.
(c)If the Inspector or Competent Person, as the case may be, is satisfied with the test, the
pipes may be erected.
(d) Neither separate certificate for feed pipes shall be issued, nor separate fee shallbe
charged for their inspection.
(e) The engraving shall be done within a period of two months from the date of receipt of the
registry number.
(2) At subsequent inspection or at any other time, the Competent Person may make an
external inspection of feed pipes and if found in an unsatisfactory condition, he shall report
the matter to the ChiefInspector who may require the pipes to be hydraulically tested.
394. Submission of plans of feed pipes.─(1)The fees for the scrutiny of plans and
particulars of the material, design and construction of feed pipes, before commencement of
manufacture of the feed pipes, shall be at the rate of Rs. 200 for 30 metres of piping or part
thereof.
(2) The fees for scrutiny of plans and particulars of the material, design and construction
of any such fittings like feed water heater shall be charged at Rs. 2500 per fitting.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 945
CHAPTER-12
SHELL TYPE BOILERS OF WELDED CONSTRUCTION
PART-I
395.Application.─ (1) These regulations shall apply to all boilers of fusion welded
construction other than Water Tube boilers and Electrode boilers referred to in Chapters-4
and 10 respectively.
(2) Where the design of the boiler is of composite construction viz. combination of Fire
tube and Water Tube, it shall comply with the relevant regulations governing that particular
type of construction.
396. General requirements.─Wherever applicable, the general requirements of Chapter-1
relating to certificates from Makers, Inspecting Authorities, and the like and of Chapter-3
concerning construction, shall be followed.
397. Equipment of workshop.─ (1) The welding plant and equipment shall be of good
quality and maintained in an efficient working condition. The welding apparatus shallbe
installed under cover and arranged so that welding work may be carried out in positions free
from draughts and adverse weather conditions. The procedure shallbe such that there is
regular and systematic supervision of the welding works, and the welding operators shall be
subjected to periodic tests for quality of workmanship by the works officials. Records of
these tests shall be kept and shallbe madeavailable to the Competent Person for scrutiny.
(2) The works shallbe equipped with welding plant equipment and quality control
personnel. However, the equipment for destructive, non-destructive testing and heat
treatment are not necessary. The manufacturer can tie-up for these facilities outside and a
letter from the party with whom he makes a tie-up shallbe made available to the Chief
Inspector of Boilers or the Inspecting Authority or his representative andshallbe allowed to
inspect the material of the party in the laboratory during the test.
398.Materials of construction.─Plates, sections and bars used in the construction of these
boilers shall comply with the requirements of Chapter-2in all respects. However, where the
tensile strength exceeds 49.6 kg/mm2, the full details of the welding technique including pre-
heating and post-heating, and the plate preparation to be used, shall be submitted to
Inspecting Authority for approval before commencement of manufacture.
399. Welding consumables.─Where welding consumables are used , they shall comply
with the requirements of regulations 71 to 76, save in the case of the weld metal as
deposited, where the tensile strength shall not be less than the lower limit specified for the
plate.
400. Plain and Stay Tubes.─ (1) Tubes shall comply with the provisions of regulations
30,47 and 48.
(2) Seamless steel cross-tubes anduptake tubesshall come with regulations 99 and
100respectively.946 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
401. Construction and workmanship.─ The manufacturer shall provide Inspecting
Authority with a fully dimensioned sectional drawing showing the construction of the boiler in
full detail for approval before putting the work in hand.Full details including dimensions of
plates preparation for the longitudinal and circumferential seams shall also be shown on the
drawing.Fully dimensioned sketches showing in details the attachment for stand-pipes,
branch pipes and seatings, the position of these attachments relative to the longitudinal and
circumferential seams and other opening shall also be given in the drawing.
402. Preparation of plates.─For preparation of plates, requirements of regulation 77 shall
apply.When plates of different thickness are aligned, the welding shall be matched to the
lower thickness plate and tolerance as required for thinner plate. (refer Figure 12/1).
403. Stress relieving.─Requirements of regulation 78 shall apply.
404. Cylindrical shells.─Requirements of regulation 80 shall apply.
405.Circularity.─ (1) The difference between the maximum and minimum internal diameters
of the shell measured at any one cross section shall not exceed one per cent of the nominal
internal diameter.
(2)The profile as measured on the outside of the boiler by means of a gauge of the
designed form of the exterior of the boiler, having a length equal to one quarter of the
internal diameter, shall not depart from the designed form by more than the percentage
given in Table 12/1.
TABLE 12/1: Maximum percentage departure from designed form of welded boilers
Serial Nominal internal diameter of boiler Maximum departure from
Number ‗D‘ in mm designed form in percentage
(1) (2) (3)
1. Up to and including 915 0.375
2. Over 915, up to and including 1150 0.350
3. Over 1150 0.300
(3) There shall be no flats at the welded seams and any local departure from
circularity shall be gradual.
406. End plates, crown plates and tube plates.─ (1) End plate of welded Lancashire and
Cornish boilers shall be flanged for attachment to shell plates.
(2) For requirements of end plates of boilers, sub-regulation (1) of regulation 86 shall apply.
(3) For requirements of hemispherical crowns, regulation 89 shall apply.
(4)For requirements of flanging, sub-regulation (2) of regulation 86 shall apply.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 947
(5) In the construction of unfired boilers when the dished ends do not form a part of the
heating surface, cold spun dished ends conforming to IS: 2825 may be used.
(6) Where flats are pressed in dished end plates, for the attachment of mountings they shall
be formed with an ample radius at the junction of the flat and curved surfaces, and shall
be free from sharp corners or tool marks.The plate shall not be unduly thinned.
(7) (a) Plates which are flanged in accordance with sub-regulation(4), shall be welded to the
parts to which they are to be connected as follows:
(i) to shells or cylindrical fireboxes as shown in Figures 12/7, 12/8, 12/9, 12/10 or 12/11.
(ii) to internal flue tubes as shown in Figures 12/14, 12/15 or 12/16.
(iii) to uptake as shown in Figure 12/16.
(iv) to combustion chamber or firebox wrapper plates as shown in Figure 12/19.
(b) Plates which are not flanged shall be welded to the parts to which they are to be
connected as follows:
(i) to shells as shown in Figure 12/12 or 12/13.
(ii) to internal flue tubes or uptakes as shown in Figure 12/17.
(iii) to combustion chamber or firebox wrapper plates as shown in Figures 12/20, 12/21
or 12/22.
(c) Where dished ends or crowns are used, they shall be flanged for connection to the
shell or the cylindrical portion of the firebox. Flat shell and firebox crown plates of vertical
boilers shall also be flanged for connection to the cylindrical portions of the shell or firebox.
(d)The opening in the firebox crown plate of a vertical boiler for the uptake shall be
flanged and the connection to the uptake made by means of a circumferential butt-weld. (see
Figures 12/3, 12/4, 12/5, 12/6).
407. Internal flues.─ (1) Sections of internal flues shall each be made from one plate, which
shall be rolled while cold to circular form. The longitudinal seam shall be fusion butt-welded
by the metal arc process.
(2) The maximum permissible variation in diameter of any cross-section shall not exceed
6 mm or half of the thickness of the plate, whichever is greater.
(3) The longitudinal welds shall be placed at lower part of the furnace and shall break
joint in successive sections at least by 150 mm. This requirement shall not be
applicable if successive sections are separated by tube plate or end plate or bowling
hoops.
(4) Where flue sections are flanged for circumferential joints, the flanging shall be carried
out at one heat by suitable machinery.
(5) Edges of all flue flanges shall be machined or flame-cut by machine (see regulation
402).
(6) Flanged circumferential seams shall be soarranged that they do not fall in line with
those of the adjacent flue or with circumferential seams of the shell.948 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(7) The minimum mean internal diameter of furnaces shall not be less than those given
in Figure 12/23 depending on the net heat input.
(8) Where furnace flue is made up of plain or corrugated sections or both, they may be
connected to each other by fusion butt welded circumferential seams.
(9) (a) Plain furnaces shall not exceed 3 meter in length except in the case of reverse
flame boilers, which are considered to be inherently flexible or as provided in clause
(d). In all other cases flexibility shall be provided in the furnace by means of
corrugations or blowing hoops or stepping of a minimum of 150 mm in the diameter of
the furnace. (see figures 12/24 to 12/28.
(b)If corrugations are used to provide flexibility, at least one-third of the furnace
length shall be corrugated.
(c)Breathing spaces as perregulation 483shall be provided for boilers made as per
this clause.
(d) Notwithstanding the provisions of clauses (a) and (b), plain furnaces longer
than 3 meter are allowed to be used in a boiler when the length between boiler
end plates do not exceed 6.5 meters provided that breathing spaces used in
this case are in accordance with regulation 484 .
(10) Where a complete flue is constructed of short plain sections, the ends of each
adjoining section shall either be swaged out to a radius to provide an adequate point
of support and longitudinal flexibility and butt-welded together or be butt-welded to
each side of a bowling hoop. The dimensions shall comply with Figures 12/31,
12/32or12/33.
(11) Stress relieving by heat-treatment shall be carried out when the construction of a flue
involves the use of a circumferential weld such stress relieving being carried out on
the completion of all welding in accordance with regulation 453.
(12) The forms of flue connections to end plates shall be as shown in Figures 12/14,
12/15, 12/16, 12/17 and 12/18 or be in any other form of welding groovesubject to the
approval of the Inspecting Authority.
408. Uptakes.─ (1) The uptakes shall be formed from seamless or electric resistance
welded or fusion butt-welded pipes by electric arc process. The tolerances on these pipes
shall comply with the requirements of regulation 251. The uptakes shall be fusion butt
welded to the upward flange of the opening of the furnace crown plate in accordance with
Figures 12/3 and 12/4. The depth of the flange of the firebox crown plate opening from the
commencement of the curvature of flange shall be not less than twice the plate thickness
with a minimum of 25 mm. Unless the whole boiler is to be subsequently stress relieved, the
uptake and firebox crown plate shall be effectively stress relieved after welding. Where the
firebox crown plate is also fusion welded to the body of the firebox as in Figure 12/16, the
firebox complete with uptake shall be effectively stress relieved by heat treatment on
completion of all welding.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 949
(2) The uptake may be attached to the shell crown as indicated on Figure 12/17
before the boiler is finally stress relieved by heat treatment.
(3) Where the vertical seam of the uptake is fusion welded, the welding shall
comply with regulation 432 and the weld shall be so arranged that it is welded externally and
internally(see Figure 12/42)
(4) It is desirable that the uptake shall be fitted with an internal cast iron liner
extending below the low water level.
409.Cross-tubes.─ Requirements of regulation 99 shall apply.
PART-2
Fireboxes and Combustion chambers
410.Furnace of vertical boilers.─ (1) The furnaces of vertical boilers may be constructed in
one or more lengthwise sections, each section being rolled from one plate to a full circle. In
such cases, the component sections may be jointed circumferentially by electric butt-
welding. The welding shall be stress relieved in accordance with regulation 432.
(2) In the case of vertical boilers where tube plates form part of the firebox, the tube
plate portion may be constructed in two vertical sections and the welding of the vertical
seams when welded shall be stress relieved.
(3) The maximum permissible variation in diameter, at any cross-section shall not
exceed 6 mm for fireboxes up to 900 mm in diameter, or 10 mm for fireboxes over 900 mm
in diameter, or half the thickness of the plate whichever is the greater.
(4) Circular fireboxes shall preferably be tapered. A taper of 38 mm in diameter per 300
mm of height is recommended. The water space at the bottom between the firebox and the
shell shall be not less than 50 mm for boilers up to and including 760 mm in diameter and
shall be not less than 63 mm for boilers over 760 mm in diameter.
(5) The method of welding shall be in accordance with regulation 432.
(6) Flats formed in the firebox for the insertion of water tubes shall have an ample radius
at the junction of the flat and the curved surfaces and shall be free from sharp corners or tool
marks. The plate shall not be unduly thinned.
(7) Ogee flanging whether integral with the firebox or made as separate ring shall
preferably be formed in one heat by suitable machinery and shall be allowed to cool
gradually to avoid internal stresses.
(8) Rings of fire holes mouthpieces or foundation rings shall be made of mild steel. ‗Z‘
sections shall not be used for foundations rings.
(9) Attachment of fireboxes to cylindrical shells shall be in accordance with Figures
12/34, 12/35, 12/36 or 12/37.
(10) The method of attachment of fire holes mouthpieces shall be in accordance with
Figures 12/40 or 12/41).950 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
411.Hemispherical Fireboxes.─(1) Hemispherical fireboxes shall be pressed to form by
machine in progressive stages without thinning and shall be annealed on completion.
(2) Methods of attachment of firebox to the shell be in accordance with Figures
12/34, 12/35, 12/36 or 12/37.
(3)The method of attachment of fire-hole mouthpieces and throat pieces shall be in
accordance with Figures 12/40, or 12/41, 12/43 or 12/44.
412.Loco-type fireboxes.─ (1) Loco-type firebox wrapper plate sides shall preferably be
tapered. The water space at the bottom between the fire-box and the shell shall be not less
than 63 mm.
(2) Where the firebox tube plate or fire-hole plate is flanged for connection to the wrapper
plate, the weld shall be located between the commencement of curvature of the flange
and first row of screwed stays.
(3) Rings for fire-holemouthpieces of foundation rings shall be made of materials as
specified in chapter -2.
(4) Z-sections shall not be used for foundation rings. The attachment of the firebox to the
outer casing shall be in accordance with Figures 12/37), or 12/30, or 12/31.
(5) The method of attachment of fire hole mouthpieces shall be in accordance with
Figures 12/40 or, where the outer casing and the firebox plate are flanged towards the water
side to form the fire hole, a ring of screwed stays located at not more than half the average
pitch of the stays distant from the commencement of the curvature of the flanging shall be
provided (see Figure 12/45.
413.Water-cooled combustion chambers.─(1) The attachment of the combustion
chambers tube plates and back plates to the wrapper plate shall be in accordance with
Figures 12/19, 12/20, 12/21, 12/22 and where the tube plate is flanged for connection to the
wrapper plate the weld shall be located between the commencement of curvature of the
flange and first row of screwed stays.
(2) The method of attachment of furnace of the flue tubes shall be in accordance with Figures
12/1512/16 or 12/17 and access openings shall be in accordance with Figures 12/40 or
12/46.
PART-3
414. Bar stays and firebox stays.─ (1) Each bar stay or firebox stay shall be made from a
solid rolled bar without weld in its length, except where it is attached to the plate it supports.
(2) Bar stays which have been worked in the fire shall be subsequently annealed.
(3) It is preferred that when the stay is in position in the boiler, its axis shall be normal to
the plate it supports, but where this cannot be so arranged, then, if the stay is fitted
with nuts, bevelled washers shall be provided between the nuts and the plate.
(4) Stays shall be secured to the plates they support by one of the following methodsas
given in regulations 415 to 418.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 951
415.Bar stays.─ (1)Plain bars, passing through clearing holes in the plates and welded
thereto (see Figure 12/50).
(2) Plain bars passing through clearing holes in the plates and fitted with washers on the
outside, the stay and washers being welded to the plates in accordance with any one of the
methods shown in Figures 12/52, 12/53, 12/54, 12/55, 12/56, 12/57, 12/58, 12/59.
Note: Clearing hole for the purpose of this regulation mean a machined
cylindrical hole having a diameter not exceeding that of bar stay by more than
2%.
416.Firebox Stays.─ (1) (a) Screwed stays, screwed through the plates and riveted over at
each end to form substantial heads, or fitted with nuts, or the projecting ends fillet-welded as
indicated in Figures 12/47 and 12/48.
(b) It is recommended that where the stays are screwed, this shall be with a fine thread
and the stays and holes shall be screwed with a continuous thread.
(c)The stays shall be screwed with fine threads of not less than 11 threads per 25 mm.
(d)The screw threads on the stays shall be clean, free from checks or imperfections, of
full depth, or a correct standard form and a good fit in the holes.The middle portion
shall preferably be turned down to the bottom of the thread.
(2) Plain stays shall be strength welded to the plates (see Figure 12/49 and 12/50).
NOTE: This form of attachment is also suitable for plain bar stays.
(3) All screwed stays less than 350 mm long shall preferably be drilled with a tell-tale hole
of5 mm diameter to a depth of 13 mm beyond the inner face of the plate. Stays which
are obscure on one side shallpreferably be made from hollow stay bar.
417. Girder stays for firebox and combustion chamber crowns.─ (1)Where girder stays
are attached with stay bolts and nuts, they shall be bedded to the corners or ends of side
plates.
(2)The attachment of girder stays welded directly to the crown plates shall comply
with Figures 12/60, 12/61, 12/62, 12/63 or 12/64. Such girders shall be welded to the crown
plate prior to stress-relieving.
(3) Each girder shall be of sufficient strength to support its due proportion of the
load on the crown plate independently of the crown plate, and the bolts or weld attachments
shall have sufficient cross-sectional area to carry the applied load.
(4) The waterways between the underside of the girder and the crown plate shall
be as large as practicable, but in no case less than 38 mm deep.
418. Gusset Stays.─Requirements of sub-regulation(1) of regulation 112 shall apply.952 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
PART-4
419. Access.─ (1) The requirements specified insub-regulations (1), (2),(3) and (4) of
regulation 135shall apply in addition to the requirements given in sub-regulations (2), (3) and
(4).
(2)At the bottom of the narrow water space in vertical boilers where internal access is
not possible, mud holes shall be arranged at equal distances round the circumference of the
boiler not less in number than as given in Table 12/2.
TABLE 12/2:Number of lower cleaning holes or mud holes
Serial Diameter of boiler No. of Holes
number
(1) (2) (3)
1 610 mm and over but not exceeding 915 mm 3
2 Over 915 mm and not exceeding 1525 mm 4
3 Over 1525 mm and not exceeding 1830 mm 5
4 Over 1830 mm and not exceeding 2290 mm 6
5 Over 2290 mm and not exceeding 2590 mm 7
6 Over 2590 mm and not exceeding 2745 mm 8
(3) Cleaning holes or mud holes in loco-type boilers shall be provided at each
bottom corner or as nearly as possible in the corners of the outer firebox casing and at the
top corners above fire hole opening and also at each corner of the saddle plate in line with
the bottom of barrel Smoke box tube shall be provided with a mud hole.
(4) A manhole shall be provided in the lower part of front end plates of Lancashire
boilers and in similar boilers with internal flues wherever practicable.
420. Manhole frames, mouthpieces and doors.─ (1) Manhole frames, mouth-pieces,
doors or cover plates shall be of mild steel. Frames shall be oval and where of the flanged
type,shall be formed to bed closely to the shell and provide a flat joining surface to the door.
Alternatively, raised circular mouth-pieces may be fitted externally and where of the flanged
type shall be bedded closely to the shell.
(2) Wherever practicable, the frame shall be attached to the inside of the shell
with the shorter axis parallel to the longitudinal centre line of the boiler. In all
cases where the shell thickness exceeds 14 mm,oval frames or circular
mouth-pieces shall be fitted.
(3) Oval frames and externally raised circular mouthpieces shall be either:
(a) Formed in one piece without weld, or
(b) Formed from a suitable rolled section and forge-welded, or fabricated by fusion
welding, provided they are stress-relieved by heat-treatment after welding and before[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 953
attaching to the boiler unless the whole boiler is to be subjected to heat-treatment on
completion.
(4) Welds shall be positioned so that they are located on the transverse centre line
of the boiler (see regulation430).
(5) The joining flanges of mouthpieces and covers shall be machined on the face and
edges and on the bearing surface for the bolts. Bolts and nuts shall be machined
where in contact with the flanges and the joints shall be formed inside and outside
the pitch line or pitch circle of the bolts to preclude the possibility of flange
distortion. Cover plates shall be dished outwards to a depth of approximately one-
eighth of the internal diameter of the frame.
(6) All edges shall be machined or flame-cut by machine (see regulation 402).
(7) Forms of manhole frames and attachments are shown in Figures 12/65, 12/66,
12/67, 12/68 and 12/69. For Manhole, head hole or access opening connections,
where compensation calculation performed as per regulation 463, does not require
compensating plates, Figure 12/108 to be used for attachment to shell.
421. Internal doors.─Requirements of regulation 137shall apply.
PART-5
422. Seatings for mountings.─For requirements of seatings for mountings, refer regulation
129.For requirements of attachment of mountings, refer regulation 130.
423.Stand Pipes.─Where stand pipes are used, the flanges shall be machined or flame-cut
by machine on the edges. The bolting flanges shall be machined on the jointing and
bolting surfaces.
424.Saddles.─ Where saddles are used, the edges of the flanges shall be machined or
flame-cut by machine. The joining surfaces shall be machined. The studs for the attachment
of the mountings, if screwed through the saddle, shall be fitted on the inside with nuts of full
thickness.Where the stud holes do not penetrate through the saddles the length of the
screwed portion of the stud in the plate shall be not less than the diameter of the stud.
425.Pads.─Where pads are used, the joining surfaces shall be machined. The pads shall
have sufficient thickness to allow drilling of the stud holes for mountings without inner
surface being pierced and the length of the screwed portion of the stud in the pad shall be
not less than the diameter of the stud.
426.Attachment of standpipes.─(1)The following constructions as tostandpipes attached
to shells and end plates shall be permissible:-
(i) When the internal diameter of the standpipe does not exceed 25 mm the standpipe
may be screwed into the plate with a nut on the waterside.954 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ii) Where the internal diameter of the standpipe exceeds 25 mm but does not exceed 50
mm, it may be screwed in and seal welded.
(iii) Where the diameter of the standpipe exceeds 50 mm, it may be welded to the end
plate.
(2) The provisions in sub-regulation(1) as to the standpipe attachment shall be regulated
by the following conditions-
(i) When standpipes are screwed, the screwing shall be of standard pipe thread.
(ii) Standpipes shall be attached by one of the methods shown in Figures 12/104,
12/105,12/106,12/107, 12/108, 12/109, 12/110, 12/111, 12/112, 12/113 and
12/118 or by any other method approved by the Inspecting Authority.
(iii) Where the standpipes are fabricated by fusion-welding, they shall be stress
relieved by heat-treatment before attachment to the boiler, unless the whole
boiler is subject to heat-treatment on completion.
(iv) Where the bore of the standpipe does not exceed 127 mm or the diameter of
the opening in the shell does not exceed 127 mm plus twice the thickness of
the plate to which it is attached, the standpipe may be welded to the plate
without subsequent heat-treatment of the welds made. If these limits are
exceeded, the whole plate to which the standpipe is attached shall be stress
relieved by heat-treatment on completion of welding.
427.Attachment of pads.─(1) Pads welded to the shell or end plate shall be welded
internally and externally.
(2)Methods of attachment of pads shall be as shown in Figures 12/115, 12/116 or 12/117.
Where the bore of the seating does not exceed 127 mm or the diameter of the opening in the
shell does not exceed 127 mm plus twice the thickness of the plate to which it is attached,
the pad may be welded to the plate without subsequent heat-treatment of the welds so
made. If these limits are exceeded the whole plate to which the pad is attached shall be
stress relieved by heat-treatment on completion of welding.
428.Attachment of water and pressure gauges.─ Water gauges and pressure gauge
siphons may be attached direct to the front end plate without the intervention of a pad or
standpipe, provided they are flanged and secured by studs. If the studs are screwed through
the plate, nuts of full thickness shall be fitted on the inside of the plate.
429.Bolts and Nuts.─All holes for bolts and studs shall be drilled and bolts and nuts shall
be machined where in contact with the flanges.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 955
PART-6
430. Compensating plates.─Compensating plates shall be of same material as that of shell
and before attachment, shall bed closely to the plates to which they are to be connected.
Any weld therein shall be on the transverse centre line.
431. Definition of the term ‘fusion weld’.─ (1) For the purpose of this chapter, the term
‗fusion weld‘ is applicable to all welded seams made by the metal arc process with covered
electrodes or by any other electric arc process in which the arc stream and the deposited
weld metal are shielded from atmospheric contamination.
(2) The relevant provisions of this chapter shall also apply to the single run or heavy
run welding process and that welded boilers manufactured by that process shall comply with
all regulations of this chapter excepting those in which divergence is necessary solely
because of special requirements essential for the most efficient utilisation of that process.
Thus all regulation governing quality of material construction workmanship, and testing (both
non-destructive and otherwise) are applicable.
(3) Where welded shells conforming to the regulations of this chapter are made by single
or heavy run process,it shall be understood that regulations 431,432 and 433 do not apply
in their entirety. The method of making the welds shall be approved by the Inspecting
Authority.
432. Methods of welding.─ (1) The seams shall be fusion welded from both sides of the
plates. The main welding may be on either side of the plate, whichever itis most convenient
to the manufacturer. Before the second side of the plate is welded, the weld metal at the
bottom of the first side shall be removed by grinding, chipping, machining or other approved
method.
(2) Provided the requisite quality of welding is achieved, the seams may be welded
from both sides of the plate or from one side of the plate. Before the second side of the plate
is welded, the metal at the bottom of the first side shall be removed by grinding, chipping,
machining or other approved method.
(3) Additional runs of metal shall be deposited at both surfaces of the welded
seams to ensure that the weld metal at the level of the surfaces of the plate is refined as far
as possible.
(4) Thickness of such additional welding shall not exceed values given in following table.
TABLE 12/3: Thickness of additional welding
Serial Maximum reinforcement in mm
number
Nominal thickness in mm
Circumferential joint in Pipe
Other Welds
and tubing
(1) (2) (3) (4)
1 Upto 3 2.5 2.5956 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
2 Over 3 to 5 incl. 3.0 2.5
3 Over 5 to 13 incl. 4.0 2.5
4 Over 13 to 25 incl. 5.0 2.5
5 Over 25 to 50 incl. 6.0 3.0
6 Over 50 to 75 incl. Note 4.0
7 Over 75 to 100 incl. Note 5.5
8 Over 100 to 125 incl. Note 6.0
9 Over 125 Note 8.0
Note – The greater of 6 mm or 1/8 times width of weld in mm
(5) The surfaces of the welds which are to be subsequently radiographed shall
be sufficiently free from coarse ripples, overlap, grooves, abrupt ridges and
valleys, so as to avoid stress raisers and to permit proper interpretation of
radiographs andother Non-Destructive Test (NDT) methods. If there is a
question regarding the surface condition of the weld when interpreting a
radiographic film, the film shall be compared to the actual weld surface or
provide smooth contours and to be flush with the respective surfaces of the
plate before radiography examination is done.
(6) In the case of circumferential shell seams welded by submerged arc or any
other approved automatic process producing a similar surface finish, such
circumferential welds, need not be flush dressed, subject to their surface
finish and shape being acceptable to the Inspecting Authority.
(7) Undercut shall not exceed 0.8mm or 10% of wall thickness, whichever is less and
undercut shall not encroach on design wall thickness.
(8) The positions of the welds shall be marked, compensation plates, doubling plates or
manhole frames, not less than two runs or metal shall be deposited at each weld.
(9) When affixing standpipes, branch pipes, seatings, compensation plates, doubling plates
or manhole frames, not less than two runs or metal shall be deposited at each weld.
(10) Each run of weld metal shall be thoroughly cleaned and freed from slag before the
next run is deposited.
433. Types of welded shell seams.─The longitudinal and intermediate circumferential
seams shall be made with butt joints of the single or double U or V type (see Figures 12/3,
12/4, 12/5, and 12/6) or of any other type approved by the Inspecting Authority. End
circumferential seams shall be in accordance with Figures 12/7, 12/8, 12/9, 12/10, 12/11 or
12/12 or with any other form approved by the Inspecting Authority.
434. Repairs to welded seams.─ (1) Any repair to a weld carried out by the manufacturer
shall first be agreed to by the Competent person.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 957
(2) (a)Where defects are distributed over the whole length of the seam,the total length of
the portions which may be cut from any one longitudinal or circumferential seam to
remove all defects shall not exceed 15 percent of the total length of the seam.
(b) When, however, the defects are all located in a single continuous length
which may be cut out to remove all defects shall not exceed 10 percent of the total
length of the seam.
(3) Defect shall be cut out by chipping, machining or other approved methods.
(4) In the case of Class I boilers, all repaired areas shall be subjected to radiographic
examination.
435.Tests on welded seams of shell.─(1) Test plates to represent all welded seams shall
be attached at each end of each longitudinal seam. These shall be of a size sufficient for the
preparation of the test pieces specified. In the case of shell plates, the test plate may be
located at one end only (see Figure 12/58). Where the shell is formed in two or more rings,
the staggered longitudinal seam shall be regarded as a continuous longitudinal seam
provided the welding be effected in one reasonably continuous operation and by the same
operator or operators. The material for the test plates shall be cut from the respective plate
or plates forming the appropriate seam.
(2) In the case of insufficient material being available on the shell plate to permit the cutting
of test pieces, these shall be acceptable if they are made from another plate,provided it is
made from the same cast. The test plates shall be stamped by the Inspecting Authority
before being cut.
(3) The weld groove in the test plates shall be similar to that adopted for the
corresponding edges of the longitudinal seam, and the respective fusion faces shall be in
continuous alignment. The test plates may be reinforced or supported during welding so that
any relative displacement due to warping during welding does not exceed 5°. The weld
metal in the test plates and the seam shall be deposited continuously at the same operation.
(4) The weld in any test plate shall not be repaired. If any defects are revealed in the
weld metal of a test plate the position of this shall be clearly marked on the plate and the test
pieces shall be selected from such parts of the test plates as may be decided by the
Competent Person.
(5) Test plates warped during welding by not more than 5° may be straightened before
heat-treatment. For the heat-treatment of the test plates (see regulation 453).
(6) Where there are circumferential seams only or where the method of welding the
circumferential seams differ from that employed for the longitudinal seams, the test plates
shall be provided.
PART-7
436.Test of Class I boilers .─(1) Specimens for the following tests shall be selected from the
test plate or plates and stamped by the Competent Person for identification (see Figures 12/71
and 12/72).958 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(i) One tensile test specimen for the welded seam.
(ii) One all weld metal tensile test specimen.
(iii) Two bend test specimens.
(iv) Two impact test specimens.
(v) One specimen from each test plate for macro examination.
(2) The dimensions of the specimens shall be in accordance with the sketches in Figures
12/73, 12/74, 12/76,12/77 and 12/78. The remainder of the test plates shall be retained for re-
tests, if required. Any specimen for re-test shall be cut from the same test plate as the original
specimen. Specimens representing welded seams shall, if necessary, be straightened cold
before the commencement of machining. Tensile and bend specimens shall, if practicable, be
of the full plate thickness. Surfaces of tensile, bend and Charpy specimens corresponding
with the outside or inside of the boiler shall be lightly dressed only so that the rolled surface of
the parent metal is not wholly removed. Where the rolled surfaces of the abutting plates are
not level with one another one plate may be machined at each face of the weld so long as the
depth of the metal removed does not exceed 0.8 mm.
437. Tensile tests.─ (1) Welded joint; the dimensions of the reduced tensile section shall be as
shown in Figure 12/73. The width of the reduced section shall be at least 25 mm.
(2) If the thickness of the plate does not exceed 30 mm, the thickness of the specimen shall be
equal to the plate thickness and the plate surface of the specimen shall be machined to take
away the surface irregularities of the plate and the weld.
(3) If the plate thickness exceeds 30 mm, the tensile test shall be carried out on several
reduced section specimens, each having a thickness of at least 30 mm and width at the
effective cross-section of at least 25 mm. These specimens shall be taken out of the test
piece in such a way that the tensile test covers the whole thickness of the weld joints as
shown in Figure 12/74. The tensile strength shall not be less than the lower limit specified for
the plate.
(4) The dimensions of the all weld metal tensile test specimen shall be those given in Figure
12/77. The diameter shall be the maximum possible consistent with the cross section of the
weld but in no case more than 20 mm, the gauge length shall be equal to five times the
diameter. The tensile strength shall not be less than the lower limit specified for the plate.
The elongation shall not be less than 20% on a gauge length of five times the diameter of
the specimen or 5.65 times the square root of the cross-sectional area of the specimen, and
the reduction in area not less than 35 percent.
438.Cold bend tests.─ (1) Two bend tests shall be madeas given in this regulation.
(2) One specimen shall be tested with the outer surface of the weld in tension and the other
with the inner surface in tension. The specimen shall be rectangular in section and shall be
cut out transversely to the weld so as to have a width not less than one-and-a half times the
thickness of the plates. The sharp corners of the specimens shall be rounded to a radius not
exceeding 10% of the thickness of the specimen.
(3) Where the plate thickness does not exceed 32 mm, the thickness of the specimen shall be
equal to the full thickness of the test plate. Where the plate thickness exceeds 32 mm, the[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 959
specimen shall in all cases have a thickness of at least 32 mm. The specimen to be tested
with the outer surface of the weld in tension shall be prepared by cutting to waste the metal
local to the inner surface of the weld, so that the desired specimen thickness is obtained
(see A, Figure 12/78).
(4) The specimen to be tested with the inner surface in tension shall be prepared by cutting
to waste the metal local to the outer surface of the weld so that the desired specimen
thickness is obtained (See B, Figure 12/78). Where the thickness of the plate permits, both
specimens may be cut from the same piece of plate, the specimens being located in the
plate one above the other (see C, Figure 12/78). Each specimen shall be mounted with the
weld midway between the supports set apart at a distance of not more than 5.2 times the
thickness of the specimen and pushed through the supports with a former having a diameter
equal to three times the thickness of the specimen.
(5) On completion of the test, no crack or defect at the outer surface of the specimen shall be
greater than 1.5 mm measured across the specimen or 3 mm measured along the length of
the specimen. Premature failure at corners or the specimen shall not be considered cause
for rejection.
439.Impact tests.─ Impact tests shall be as perregulation 162.
440.Macro and micro examinations.─(1) A specimen of the full thickness of the plate and not
less than 13 mm wide shall be provided from each set of test plates for the purpose of macro
and micro examinations.
(2) Micro-etching of a complete cross-section of the weld including the heat affected zone shall
show satisfactory penetration, fusion and absence of significant inclusions or other defects.In
case thereis any doubt as to the condition of the weld as shown by macro-etching, the area
concerned is to be microscopically examined for defect investigation.
441.Additional tests before rejection.─(1)In case any of the test specimens taken in
accordance with regulations 435 to 443fail to meet the specified requirements, retests shall
be allowed for each specimen that fails as follows:
(2) Where any result of the tensile test is not less than 90% of the specified figures, one retest
shall be made. Where any result falls below 90%, two retests shall be made.
(3) Where a bend specimen fails to meet the specified requirements, two retests shall be
made.
(4) If an impact test fails to meet the specified requirements, two retests shall be taken from the
test plate, one on each side of the final specimen and separate from it by not more than 5
mm.
(5) If it be found there is insufficient metal to permit the preparation of specimens for retests
from the remainder of the test plate from which the original specimen was taken, the
specimen for retest may be cut from the test plate relating to the opposite end of the same
longitudinal seam.
(6) In case any of the additional tests fail to meet the specified requirements, the welded seams
represented by these tests shall be rejected.960 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
442.Specimens after tests.─If required, the specimens after test shall be at the disposal of the
Inspecting Authority for examination.
443. Radiographic examinations.─ (1) Every portion of the longitudinal and circumferential
butt-welded seams of the shell of the boiler shall be subjected to radiographic or ultrasonic
examination. Each Longitudinal and circumferential butt welded seams of Furnace, Reversal
chamber, Access tube and drop pipes shall be subjected to 10% radiographic
examination.The percentage of welds to be examined shall include each intersection of
longitudinal and circumferential seams.Where ultrasonic examination is used, it shall be
demonstrated to the satisfaction of the Inspecting Authority that the equipment and the
technique used are satisfactory. The manufacturer shall ensure that the operator employed
is competent to use the equipment, apply the technique and interpret the results of the
examination.
(2) The methods employed in obtaining the radiographs shall be such as to show clearly
differences equal to 2% of the thickness at the welded joints. To determine whether this
result is being attained, an indicator of approved form which includes a portion equivalent to
not more than2% of the joint thickness shall be placed in the vicinity of the weld so as to
make a record on each radiograph. Each section of every weld shall be marked so that the
radiographs can be easily correlatedto the particular part of the seam represented.
(3) The examination shall be made from the original films and the acceptability of the welds shall
be decided by the Inspecting Authority. The welds deemed unsatisfactory shall be rejected
or dealt with under the condition of regulation 434 and can be radiographed again. The films
shall be retained by the manufacturer for minimum three years for reference.
Notes: (1) Magnetic Particle Flaw Detection, Magnetic methods of flaw detection shall be employed
wherever possible for ferrite steel.
(2) Dye-Penetrate Flaw Detection; Dye-penetrant or equivalent methods of flaw detection
shall be employed for Austenitic or other non-magnetic steel.
(3)All butt-welded joints shall be subjected to non-destructive examination by radiographic,
radioscopy or other approved methods such as ultrasonic testing, magnetic particle
inspection or liquid dye penetrant inspection. When radioscopic examination is to be
performed in lieu of radiography on welded components, the following requirements shall be
met, namely:-
(a) A written procedure shall be submitted for approval to the
Inspecting Authority which shall contain the following:
(i) material and the thickness range;
(ii) equipment qualifications;
(iii) test object scan plan;
(iv) radioscopic parameters;
(v) image processing parameters;
(vi) image display parameters;
(vii) image archiving requirements;
(viii) accept-reject criteria (Code reference);
(ix) performance evaluation;
(x) Operator identification.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 961
(b) The system shall be aided with an image processor to enhance
the quality of the radioscopic images and system performance
quality shall exhibit-
(i) a thin section contrast sensitivity of 3%;
(ii) a thick section contrast sensitivity of 2%;
(iii) a spatial resolution of 3 line pairs per mm;
(iv) IQI sensitivity - 2% of the joint thickness when wire IQI's
are to be used, the wire diameter axis shall be oriented
along the axis of the least sensitivity of the system.
(c) Radioscopes are to be properly marked to co-relate with
particular part of joint represented.
(d) The radioscopic examination data shall be recorded and stored
on videotape, magnetic disk or optical disk or any otherelectronic
media at the maker's plant for a sufficient period after the date of
radioscopic examination as specified by the Inspecting Authority,
Efficient radioscopic examination record recall shall be made
available at any time over the record retention period and shall
be traceable to the test objects.
(e) When repair has been performed as a result of radioscopic
examination, the repaired areas shall be re-examined using the
same radioscopic technique to evaluate the effectiveness of the
repair.
(f) To aid in proper interpretation of the radioscopic examination
data, the details of the technique used shall accompany the data.
As a minimum, the information shall include the approved
procedure requirements and system performance test data.
PART-8
444. Test for class II boilers.─ (1) Test pieces shall be selected from each longitudinal
seamfor the following tests and stamped by the Competent Person for identification.
(i) From the test plate or plates:
(ii) One tensile test specimen for welded seam.
(iii) One bend test specimen.
(iv) One reverse bend test specimen.
(v) One nick-break test specimen.
(2) The disposition of the specimen shall be in accordance with the
sketches in Figure 12/79. The remainder of each test plate shall be
retained for retests, if required.
445.Tensiletest.─The dimensions of the test specimen shall be in accordance with the
sketch in Figure 12/73:Specimen1A, and the specimen shall be cut out transversely to962 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
the welded seam. When the capacity of the available testing machine does not allow full
specimen to be tested, two narrower tensile specimens shall be substituted. These
specimens shall be the full thickness of the plate at the welded joint and their breadth
shall be as great as the testing machine will reasonably allow, provided the effective
cross sectional area of the test piece is not less than 968 mm2 (see Figure
12/74:specimen 1B). The tensile strength of the welded joint specimen shall not be less
than the lower limit specified for the plate.
446.Cold bend tests.─ (1) Two bend tests shall be madeas given in this regulation.
(2) One specimen shall be tested with outer surface of the weld in tension, and the other
with the inner surface in tension. The specimens shall be rectangular in section and
shall be cut out transversely to the weld so as to have a width not less than one-and-
a-half times the thickness of the plate. The sharp corners of the specimens shall be
rounded to a radius not exceeding 10 percent of the thickness of the specimen.
(3) The specimen to be tested with the outer surface of the weld in tension shall be
prepared by cutting to waste the metal local to the inner surface of the weld, so that
the desired specimen thickness is obtained (see A, Figure 12/78). The specimen to be
tested with inner surface in tension shall be prepared by cutting to waste the metal
local to the outer surface of the weld so that the desired specimen thickness is
obtained (see B, Figure 12/78). Where the thickness of the plate permits, both
specimens may be cut from the same piece of plate, the specimens being located in
the plate one above the other (See C, Figure 12/78).
(4) Each specimen shall be mounted with the weld midway between the supports set
apart at a distance of not more than 5.2 times the thickness of the specimen and pushed
through the supports with a former having a diameter equal to three times the thickness
of the specimen.
(5) On completion of the test, no crack or defect at the outer surface of the specimen
shall be greater than 1.6 mm measured across the specimen, or 3 mm measured along
the length of the specimen. Premature failure at corners of the specimen shall not be
considered cause for rejection.
447.Nick-break specimen .─ (1) This specimen shall have a width not less than one and a
half times its thickness and the slot shall be cut in each side of the specimen through the
centre of the weld and perpendicular to the outer face of the boiler.
(2) The specimen shall then be broken in the weld and the fracture shall reveal a sound
homogenous weld substantially free from slag inclusions, porosity and coarse crystallinity.
448.Additional tests beforerejection.─ In case any of the test specimens fails, two retests
shall be made and both shall meet the specified requirements.
449.Specimen after tests.─If required, specimens after tests shall be at the disposal of the
Inspecting Authority for examination.
450.Radiographic or ultrasonic examination.─Each longitudinal and circumferential seams
in class II boiler (including shell to end plate) shall be subjected to spot radiographic or
ultrasonic examination.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 963
PART-9
451.Test for Class IIIboilers.─Specimens for the following tests shall be selected from the
test plate or plates and stamped by the Competent Person for identification.
(i)One forward bend test.
(ii)One reverse bend test.
452.Radiographic or ultrasonic examination.─ Each longitudinal and circumferential seams
in class III boiler (including shell to end plate) shall be subjected to spot radiographic or
ultrasonic examination.
PART-10
453. Heat treatment.─All boilers constructed to Class I or Class II requirements shall be
stress-relieved by heat treatment after completion of all welding and before hydraulic test as
per regulation 123.
454.Classification of fusion-welded boilers.─The boilers covered by this chapter shall be
classified in accordance with Table 12/4.
TABLE 12/4:Classification of fusion-welded boilers
Serial Classification Limits of application Minimum thickness
number
(1) (2) (3) (4)
1 Class I No limit 8 mm
2 Class II When the following limits are not
exceeded:
(a) Maximum Allowable Working pressure Boilers upto and including
7 kg/cm2. 915 mm internal diameter 8
(b) Maximum Allowable Working pressure mm.
in kg/cm2 multiplied by internal diameter in
cm – 940
3 Class III When the following Limits are not
exceeded: Boiler over 915 mm internal
(a) Maximum Allowable Working pressure diameter 10 mm.
2 kg/cm2.
(b) Maximum Allowable Working pressure
in kg/cm2 multiplied by internal diameter in
cm – 535
455.Shells.─ (1) The Maximum Allowable working pressure of cylindrical shells for Class I
boilers shall be determined in accordance with regulations 169 and 170.
(2) (a)The Maximum allowable working pressure of cylindrical shells for Class II and Class III
boilers shall be determined by the following formula:
(T-1.5) SC
P = --------- Equation (12/1)
0.7 D
Where,
T = is minimum thickness of shell plate in mm,
P = is Maximum Allowable working pressure in kg/cm2,
D = is maximum internal diameter in mm,964 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
S = is minimum tensile strength of plate in kg/mm2,
C = is a constant, as given below.
(b) In no case, however, shall be the factor of safety of shell be less than 4 or the plate
thickness be less than specified in Table 12/4 given under regulation 454,
C=27, where Class II requirements are complied with,
C=23, for Class III boilers when stress relieved,
C=21, for Class III boilers when no stress relieved.
(3) Where boilers have a nest of horizontal tubes, so that there is a direct tension on the tube
plates during the vertical load on the boiler ends or to tube plate acting as horizontal ties
across the shell:
(a)Each alternate tube in the outer vertical row tubes shall be a stay tube;
(b) The thickness of the tube plates and the pack of the tubes shall be such that the
section metal taking the load is sufficient to keep stress within that allowed on the
shell plate determined by the following formula:
(T-2) SJ
P = ---------- Equation (12/2)
2D
Where,
T = is thickness of the tube plate in mm,
P = is Maximum Allowable working pressure in kg/cm2,
S = is the minimum tensile strength in kg/mm2,
D = is twice the radial distance of the centre of outer row of tube holes from the axis of
the shell in mm,
J = is the percentage strength of the plate through the tube holes, i.e.
100 (p-d)
J= ----------- Equation(12/3)
P
p = is the vertical pitch of tubes in mm,
d = is the diameter of the tube holes in mm.
Note: The tube plates between the stay tubes shall come with the requirements for tube plates (see
regulation 469).
456.Horizontal shelves of tube plates forming part ofthe Shell.─(1)The number of
gusset required to support the horizontal shelves of tube plates to withstand vertical load due
to the pressure on the boiler end shall be determined in the following manner:
(a)For combustion chamber tube plates, the minimum number of the gussets shall be:-
Where C exceeds 4560 1 gusset.
Where C exceeds 6240 2 gussets.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 965
Where C exceeds 7440 3 gussets.
(b) For smoke fox tube plate,the minimum number of gussets shall be:-
Where C exceeds 4560 1 gusset.
Where C exceeds 8400 2 gussets.
PAD
And C = --- Equation. (12/4)
t
Where,
A = is maximum horizontal dimension of the shell from the inside of the shell plate is to
the outside of the tube plate in inches (See Figure 12/75),
D = is inside diameter of the boiler in inches,
P = is Maximum Allowable working pressure in pounds per square inch,
t = is thickness of tube plate in thirty-seconds of an inch.
(2)The shell plates to which the sides of the tube plates are connected shall be not
less than 1.5 mm thicker than is required by the formula applicable to shell plates with
continuous circularity; and where gussets or other stays are not fitted to the shelves, the
strength of the parts of the circumferential seams at the top and bottom of these plates from
the outside of one tube plate to the outside of the other, shall be sufficient to with-stand the
whole load on the boiler end, with a factor of safety of not less than 4.5.
457. Dished end plates for Lancashire and Cornish boilers.─ (1) For the dished ends of
Lancashire and Cornish boilers without stays and subject to internal pressure, the maximum
allowable working pressure shall be determined by the following formula:
( )
Equation (12/5)
( )
Where,
t = is minimum thickness of the end plate in mm,
P = is maximum allowable working pressure in kg/cm2(g),
R = is the inner radius of curvature of the end plate in mm,
S = is minimum tensile strength of the plate in kg/cm2.
(2)The inner radius of curvature of the end plate shall not exceed 1½ times the external
diameter of the shell which it is attached.
(3) The inner radius of flanging of the end plate shall be not less than 4 times the
thickness of the plate but in no case less than 63 mm.
(4) Where the end plate has a manhole, compensation shall be obtained by flanging the
edge of the opening or by providing a fabricated ring (see Figure 12/65).966 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) In either case the depth of the flanging or ring measured at the minor axis shall not
be less than that determined by the following formula:
D = √TW Equation (12/6)
Where,
D = is depth of Flange or ring in mm measured from the outside of the plate to the joint
face,
T = is thickness of the plate in mm,
W = is width of the opening in mm measured on the minor axis.
458. Dished Ends subject to internal pressure.─ (1) For unstayed ends of shells and tops
of vertical boilers and the like boiler parts, when dished to partial spherical form the
maximum allowable working pressure shall be determined by the following formula:
( )
Equation (12/7)
Where,
P = is the maximum allowable working pressure in kg/cm2(g),
t = is the thickness of the end plate in mm but in no case this shall be less than the
thickness of the shell to which it is attached,
R = is the inner radius of curvature of the end in mm, which shall not exceed the external
diameter of the shell to which it is attached,
S = is the minimum tensile breaking strength of plate in kg/cm2, or whatever is allowed for
it.
(2) The inside radius to which a crown plate is dished shall be not greater than the
external diameter of the cylinder to which it is attached.
(3) The inside radius of curvature of the flanges to the shell shall be not less than 4
times the thickness of the crown plate and in no case less than 63 mm.
(4) The inside radius of curvature of flanges shall be not less than twice the thickness of
the crown plate and in no case less than 25 mm.
(5) When the end has a manhole in it (t-3.97), shall be substituted for (t-0.79) in the
formula.
(6) The total depth of flange of manhole from the outer surface measured on the minor
axis shall be at least equal to -
√ (T x W) depth of flange in mm. Equation (12/8)
Where T = is the thickness of the plate in mm and W is the minor axis of the hole in mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 967
(7) The depth of the crown plate opening from the commencement of the curvature of
the flanging radius shall be not less than twice the plate thickness with a minimum of
25 mm.
459.Nothing in regulation 458 shall preclude the use of dished ends in compliance with
regulations 174 to 177, where not fitted with an uptake.
460. Dished Ends subject to external pressure.─ (1) In the case of unstayed dished
ends, for the co-efficient 0.216 in equation 12/7, the co-efficient 0.173 shall be substituted,
and R shall be the outer radius of the curvature of plate, which shall not exceed the external
diameter of the shell to which it is attached.
(2)For plates exposed to furnace-flame, the co-efficient shall be 0.151.
(3) In no case shall R/t exceed 2.75.
(4) The inside radius of curvature at the flange shall be not less than 4 times the
thickness of the end plate and in no case less than 63 mm.
(5) The inside radius of the curvature of the flange to uptake shall be not less than twice
the thickness of the crown plate and in no case less than 25 mm.
461. Hemispherical Crowns.─ (1) The maximum allowable working pressure for
hemispherical crowns subjected to internal pressure shall be determined by the following
formula:
( )
Equation (12/9)
Where,
t = is thickness of plate in mm,
P = is the maximum allowable working pressure in kg/cm2(g),
R = is inner radius of curvature in mm,
S = is minimum tensile strength of the plate in kg/cm2,
C = is a constant, as given in sub-regulation(2).
(2) In no case, however, shall the factor of safety to the crown plate be less than 4
,nor the plate thickness be less than specified in Table 12/4 given under regulation 454.
C = 0.4608 where Class-1 requirements are compiled with,
C = 0.3888 where Class-2 requirements are compiled with,
C = 0.3312 for Class-3 boilers when stress relieved,
C = 0.3024 for Class-3 boilers when stress relieved.
462. Manholes and other openings in Shells.─Requirements of regulation 139 shall
apply.968 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
463.Compensation for openings in Shells.─ (1) Where the width of any opening
(measured in a direction parallel to the longitudinal axis of the boiler) exceeds two-and-a half
times the thickness of the shell plate in mm plus 70 mm, compensation shall be provided.
(2) The area to be compensated shall be the product of the maximum width of the
opening cut in the shell (measured in a direction parallel to the longitudinal axis of
the boiler) and the thickness of an unpierced seamless shell of similar material.
For Class I boiler, thickness will be determined in accordance with regulations169
and 170. For Class II & Class III boilerby Equation 12/1, with constant C = 35 for
the same maximum allowable working pressure.
(3) Compensating Area shall be considered adequate when the sum of the following
area is not less than the area to be compensated:
(a) The area obtained by multiplying the difference the actual thickness of the
shell and the thickness required for an equivalent unpierced seamless shell
by a length 2(75 mm + Ts), there Ts is the actual thickness of the shell plate
in mm.
(b) The net cross-sectional area of the frame or pad, or in the case of a branch or
manhole, head hole ring,the cross-sectional area of the wall of the branch or
manhole, head hole ring minus the sectional area of a branch or manhole,
head hole ring of the same bore having thickness equal to that calculated in
accordance with regulations169 and 170, plus the thickness required to
withstand external loads. The area shall be measured within limits such that
(a+b) in Figure 12/80does not exceed 100 mm.
(c) For Manhole & Head hole rings of Oval shape diameter to be taken in
calculation is to be calculated from formula below
Where,
a is major axis of Oval frame in mm.
b is minor axis of Oval frame in mm.
(d) Where material of a frame, pad or branch has a tensile strength which differs
from that of the shell to which it is attached, the compensating area shall be
multiplied by the ratio:
Tensile strength of compensating part
--------------------------------------------------
Tensile strength of shell plate
(e) The cross-sectional areas of the welding fillets.
(4) (a) In cases where the sum of (a), (b) and (e)in sub-regulation (3) is less than the
area to be compensated, a compensating plate shall be welded to the shell, its
total cross-sectional area being equal to the amount of the deficit and due[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 969
allowance being made as above when the tensile strength of the material of the
plate differs from that of the shell.
(b) The compensating plate may be fitted on the inside or outside of the shell
plate as most convenient and its diameter shall not exceed twice the
longitudinal width of the opening in the shell.
(5) (a)Figure 12/80shows a welded branch to which foregoing requirements apply
where:
W = is width of the opening in the shell in mm,
T = is actual thickness of shell in mm,
s
T1= is thickness of an equivalent unpierced seamless shell as given in regulation
sub-regulation (2),
T = is actual thickness of branch in mm,
n
T is minimum thickness body of branch given in regulation 463(3)(b),
2 =
T = is thickness required to withstand external loads in mm = 3 mm unless the
3
loading is known to be such as to require a greater thickness and is=0 where
there is no external loading,
T = is minimum thickness of compensating plate in mm,
c
S = is minimum tensile strength of shell plate in kg/cm2,
1
S = is minimum tensile strength of branch in kg/cm2,
2
S = is minimum tensile strength of compensating plate in kg/cm2,
3
W = is width of compensating plate in mm measured in the same plate as the shell
opening.
(b) AREA TO BE COMPENSATED
A = W x T1
(c )Portion of shell available for compensation:
B =2(75+Ts) (Ts-T1)
(d) Portion of branch available for compensation:
C = 2 (100+Ts) [Tn – (T + T3)]
2 -
(e) Portion of welds available for compensation:
D = Total cross-sectional area of the internal and external welding fillets.
If A is greater than (B+C+D), additional compensation is required to
make up the difference. In the example shown in Figure 12/80this is
provided by means of a compensating plate, the total compensating
area being such that (B+C+D) +Z is not less than A where:970 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Z = 2 x W x T x S
c 3
--
S
1
464. Raised manhole frames, cover plates and joint bolts.─Requirements of regulation
138shall apply.
465.Standpipes and branches.─ (1) The thickness and bolting of all flanges for joining the
mountings and fittings shall be in accordance with the dimensions as laid down in Appendix-
F to these regulations. In no case, however, shall the thickness of flanges be less than 13
mm.Flanges conforming to International codes and standards such as ASME, BS, EN, DIN
can be used meeting required pressure and temperature ratings.
(2) (a) The wall thickness of nozzles and other connections shall not be less than that
specified for the applicable loading, namely, internal pressure, bending and static
loads.
(b)The pressure loading shall be determined by regulation 455, but in no case shall
the thickness be less than that calculated by the following formula:
t = 0.04D + 2.5 mm Equation(12/10)
Where t is the thickness of standpipe and ‗D‘ is the outside diameter of
connection. If the branch is connected by screwing, the thickness ‘t‘ shall be
measured at the root of the thread.
(3) Where a double flanged steam pipe is tapered, the thickness of flange joining the
boiler and fitting shall correspond to the bore of pipe at the flange connection in
accordance with Appendix-F to these regulations.
466. Stayed flat surfaces (other than crowns of vertical boilers).─ For various braced
and stayed flat plates and those which by these regulations require staying as flat surfaces
with braces or stay bolts of uniform diameter symmetrically spaced, the thickness shall be
calculated by the following formula; namely:-
P
e = Cd --- + e Equation (12/11)
1
f
1[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 971
Where,
P = maximum allowable working pressure in kgf / cm2,
e = thickness, in mm,
d = diameter of the largest circle taken between staying points of the plate (in mm),
f = 0.85 f (‗f‘as defined in regulation 169), kgf/cm2,
1
e = additional thickness equal to 0.75 mm,
1
C = coefficient having values given in table 12/5below, depending upon the form or method
of support adopted.
Table 12/5
S. No Component Value for ‗C‘
(1) (2) (3)
1 Flanged End Plate 0.32
Flat end plates welded to shell from both sides, with following
end plate thickness to shell plate thickness ratios
≤ 1.4
0.33
2
> 1.4 ≤ 1.6
0.36
> 1.6 ≤ 1.8
0.39
> 1.8 ≤ 2.0
0.42
3 Plain Furnace Less than or equal to 6.5 meters long 0.3
4 Corrugated furnace with corrugation depths ≤ 50 mm 0.32
Corrugated furnace with corrugation depths > 50 mm with a
length ≤ 6 meter
5 0.35
with a length > 6 meter
0.37
6 Bowling hoop furnace 0.35
7 Access ring welded from both sides 0.3
8 Access ring welded from one side only 0.45
9 Gusset or Link stays 0.3
10 Stay tube in tube nest 0.39
11 Isolated stay tube 0.45
12 Stay bar in group 0.39
13 Isolated stay bar 0.45972 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Notes:
i. For Flanged end plates, the diameter of largest circle shall be taken from the
commencement of the curvature of flange.
ii. When largest circle is arrived with different types of supports as mentioned above,
average value of ‗C‘ shall be taken for calculation.
iii. If the plate is Flame swept, the thickness shall be increased by 10%.
iv. The welding material used in the manufacture of these plates shall not have the
ultimate tensile strength less than that of the plate used.
467. Flat crown plates for vertical boilers.─ (1) Flat crown plates shall be supported by
the uptake and/or bar stays.
(2) The inside radius of curvature of the flange to the shell or fire box shall be not less
than four times the thickness of the plate and in no case less than 63 mm where the
plate is flanged for attachment to the uptake, the inside radius of curvature of the
flange shall be not less than twice the thickness of the plate and in no case less than
25 mm.
(3) The thickness of flat crown plates shall be determined in accordance with regulation
466.
468.Wide water spaces between and around tube nests.─The thickness of plate at wide
water spaces shall be calculated as per regulation 466 taking
Where,
A = is width of the wide water space between the tube nests in mm measured from
centre to centre of the tubes; and
B = is pitch of the tubes in the boundary rows of the wide water space in mm.
469. Flat tube plates and tubes nests.─ (1) Stay tubes are tubes having a weld depth
equal to the nominal tube thickness plus 3 mm as shown typically in figures 12/84(i) to (iv).
These stay tubes are not required within tube nests except when the tube nests comprise
tubes which are expanded only as shown typically in figure 12/82(iii).
(2) If tube nests comprise plain tubes which are expanded and beaded, expanded and
belled as shown typically in figure 12/82(iv) or expanded and welded (as shown typically
in figures 12/82(i) and (ii), welded stay tubes [as shown typically in figures 12/82 (i) to
(iv) shall be used in boundary rows in sufficient numbers to carry the flat plate loadings
outside the tube area.
(3) For plain tubes and stay tubes exposed to flame or gas temperatures exceeding 600°C,
the ends of welded tubes shall be dressed flush with the welds and the ends of the
expanded tubes shall be as shown in figures 12/82(iii) and (iv). If not so exposed, the
ends of welded tubes shall extend a maximum of 10 mm beyond the weld or, in the case
of expanded tubes, the tubes shall project beyond the tube plate up to a maximum of 15
mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 973
(4) Each stay tube shall be designed to carry its due proportion of the load on the plates
which it supports. The thickness of stay tubes welded into tube plates shall be such that
the axial stress on the thinnest part of the tube does not exceed 7.14 kg/mm2.
(5) If stay tubes are used within tubes nests, the thickness of the tube plate shall be
calculated in accordance with regulation466.
470. Manhole openings in flat plates.─ (1) Where manholes are located in flat plates, the
openings shall be suitably compensated.
(2) Compensation shall be obtained by flanging the edge of the opening, or by
providing a fabricating ring (see Figures 12/65, 12/66, 12/67, 12/68 and 12/69).
(3) The manhole in the lower portion of the flat front end plates shall be fitted with a
flanged strengthening ring, the thickness of the flat portion of which shall be not
less than (1.5 T + 3 mm),
where, T = the thickness of the end plate in mm, and in boilers of 2280 mm and over,
the manhole frame shall be fitted with a peak to reinforce the portion of the
end plate between and below the furnaces and this peak shall be securely
welded thereto.
(4) In all cases the depth of the flanging or ring shall not be less than that determined
by Equation12/6.
Note: Where the manhole is located in or between tube nests in Multi-tubular boilers or below the
furnaces of other Boilers,the stay tubes in the boundary rows, or the gusset stays, as
applicable, shall be arranged as closely as practicable to the manhole.
471. Plain Tubes.─(1) Plain tubes may be welded at both ends, welded at the inlet and
expanded at the outlet end, or expanded at both ends.Where the tubes are expanded only,
the process shall be carried out with expanders having parallel rollers, and the expanded
portion of the tube shall be parallel through the full thickness of the tube plate. In addition of
expanding tubes may be bell-mouthed or beaded at the inlet end.Where the tube is welded
to the tube plate, the tube should be lightly expanded to grip the tubes hole before welding.
(2) The thickness of tubes under external pressure shall be calculated as under:
P'D
T = -------- + C Equation(12/12)
1.6f
Where,
t = minimum thickness of tube in mm,
P' =External maximum allowable working pressure in kg/cm2 (g),
D =Outside tube diameter in mm,
C =Corrosion allowance to be taken as 0.75 mm but for stainless steel C
= 0.
Higher value may be adopted if desired by user.
f = allowable stress as per regulation 244.
(3) In no case, the thickness of straight tubes under external pressure shall be less than
as specified below:974 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Table 12/6
Serial Tube outside diameter (mm) Minimum thickness (mm)
number
(1) (2) (3)
1 Not exceeding 32 2.10
2 Exceeding 32 but not exceeding 39 2.28
3 Exceeding 39 but not exceeding 51 2.81
4 Exceeding 51 but not exceeding 70 3.12
5 Exceeding 70 but not exceeding 77 3.38
6 Exceeding 77 but not exceeding 89 3.96
7 Exceeding 89 but not exceeding 102 4.26
(4) The thickness of tubes under internal pressure shall be calculated as under:
P.D
t= ---------- + C Equation(12/13)
P + 2f
Where,
P = Internal maximum allowable working pressure, kg/cm2 (g), and other symbols as
per clarifications indicated at sub-regulation (2) above.
(5) In no case, the thickness of straight tubes under internal pressure shall be less than
aslisted below in Table 12/7:
Table 12/7
Serial Tube outside diameter (mm) Minimum thickness (mm)
number
(1) (1) (2)
1 Not exceeding 39 1.75
2 Exceeding 39 but not exceeding 51 2.16
3 Exceeding 51 but not exceeding 70 2.40
4 Exceeding 70 but not exceeding 77 2.60
5 Exceeding 77 but not exceeding 96 3.05
6 Exceeding 96 but not exceeding 102 3.28
7 Exceeding 102 but not exceeding 127 3.50
472. Pitch of Tubes.─The spacing of tube holes shall be calculated as per either of the
methods given below:
(i) The spacing of tube holes shall be calculated such that the minimum width(in mm) of
any ligament between the tube holes shall be not less than:
Where D is diameter of tube hole in mm.
(ii) The thickness and cross-section of the plate between the tube holes shall be not
less than:
0.125D + 5.08 = minimum thickness in mm,[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 975
4.318D + 16.13 = minimum cross-section in mm2,
(iii) Spacing of tube hole = minimum cross-section in square mm / provided tube
platethickness.
Where, D is diameter of the tube hole in mm.
In no case shall the minimum thickness of any tube plate in the tube area be
less than following limits:
T= 13 mm,where the diameter of the tube hole does not exceed 51 mm.
T = 14 mm,where the diameter of the tube hole is greater than 51 mm.
473. Stay Tubes.─ (1) Stay tubes shall be of seamlesssteel or electrically resistance
weldedsteel.
(2) The minimum thickness of stay tubes shall be as per regulation 119.
(3) The maximum allowable working pressure for screwed in stay tube shall be calculated
by the following formula:
[( ) ] Equation(12/14)
Where,
P is maximum allowable working pressure in kg/cm2 (g)
D is diameter of the stay tube over threads in mm.
D is internal diameter of the tubes under the threads in mm.
1
N is number of threads per mm.
A is the area in square mm supported by one Stay tube, measured from centre
to centre of stay tubes. When the area contains tubes or parts of tubes their
aggregate area, calculated from their smallest external diameter of body
when in tension and smallest internal diameter when in compression, shall be
deducted from the area of the containing figure and the remainder used as A
in the formula.
(4) Where stay tubes have their thickness increased at the screwed ends to provide for plus
threads, the increased thickness shall be obtained by upsetting and not by welding, and
the tubes shall be subsequently annealed.
(5) Stay tubes may be attached to the tube plates either by screwing or by metal arc
welding.
(6) Where stay tubes are screwed into the tube plates, they shall be screwed with a
continuous thread not finer than 4 threads per centimeter at both ends and shall be
expanded into the tube plates, by roller expander and, if desired, may be seal welded.
(7) Welded attachment of stay tubes be as shown in Figures 12/81, 12/82, 12/83,
12/84and12/85.976 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
474.Compression of Tube Plates.─ (1) For fire-box or combustion chamber tube plates
which are subject to compression due to the pressure on the roof plate, the maximum
allowable working pressure shall be:
( )
Equation (12/15)
Where,
t is thickness of the tube plate in mm.
p is pitch of the tubes in mm, measured horizontally where the tubes are chain
pitched or diagonally where the tubes are zigzag pitched and the diagonal pitch is
less than the horizontal.
D is internal diameter of the plain tubes in mm.
L is internal length of the fire-box or combustion chamber in mm measured at top
between tube plate and Firehole plate or back plate, or between tube plates in double
ended boilers with combustion chambers common to two opposite furnaces.
C = 61.16706
Provided that the above formula shall not apply in the cases of fire-boxes where the
girders do not rest on the tube plate, or where the roof plate is stayed direct to the
outer shell or to girders supported by the shell.
(2)Where girders rest on the side plates or the roof plate is so formed that the load is
carried both by side and end plates, the compressive stress on the plates shall not in
either case exceed 984 kg/cm2.
475.Girders for fire-box and combustion chamber crowns.─ (1) For girders supporting
crown plates of rectangular fire-boxes, where the ends of the girders are supported by the
vertical end or side plates, their proportions shall be calculated by the following formula:
CSTd2
P = -------- Equation(12/16)
L2Y
Where,
P is maximum allowable working pressure in kg/cm2 (g)
S is Minimum tensile stress of the material in kg/cm2,
T is Total thickness of the stay in mm.
d is Depth of the girder stay in mm,
L is Length of girder stay in mm measured between the inside of the tube plate
and the fire-hole plate, or between the inside of the
side plates, according to the method of support.
Y is Pitch of girder stays in mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 977
C = 0.352 for steel plates or steel forgings,
= 0.304 for steel castings.
(2) Where girders are welded to the crown plate the dimensions of the welds shall be
such that the stress calculated on an area equal to the sum of the effective lengths of
the welds attaching each girder multiplied by the effective throat thickness shall not
exceed 527 kg/cm2multiplied by the appropriate weld factor in Table 12/13, (―effective
length‖ and ―effective throat thickness‖ are defined in regulation486.The load on the
welds shall be taken as that due to the maximum allowable working pressure acting
on the area ‗LY‘, ‗L‘ and ‗Y‘being as defined in this regulation.
476. Girder sling stays.─For slung girders, the proportion in slings, links, pins and
connections to the shell shall be sufficient to carry the whole load that would otherwise be
carried on the toes of the girders and for any of the above parts in tension a stress of 633
kg/cm2 of net section, and for parts in shear a stress of 562 kg/cm2 of net section shall not be
exceeded. In the case of parts in double shear, the net area of the section should be taken
as 1.875 times the single section.
477. Stays for fire boxes and circular furnaces.─ (1) Forsolidcrew stays to combustion
chambers and fire-boxes and for longitudinal and cross Stays, the maximum allowable
working pressure for the stays is to be calculated from the appropriate one of the following
formulae:
C 1.28 2
P = ---- D - -----
A N Equation (12/17)
C x D 2
1
P = ---------- Equation (12/18)
A
Where,
P = is the maximum allowable working pressure in kg/cm2,
D = is diameter of stays over threads in mm,
D = is diameter of body of stay at its smallest part in mm,
1
N = is number of threads of stay per mm,
A = is area in square mm supported by one stay for area to be supported by stays near
tubes in fire-box tube plates of Loco-type boilers,
C = 499.17943 for steel or special wrought iron screw stays to combustion chamber or
fire-boxes,
C = 607.45216for steel longitudinal or cross stays fitted with nuts,
= 330.44272for copper stays.
(2) Where stays are made with enlarged ends and the body of the stay is smaller in diameter
than at the bottom of the thread, the maximum allowable working pressure shall be
calculated from the second Equation(12/18).
(3) In case of circumferential stay for circular furnaces and fire-boxes ,the diameter of stay
shall not be less than 19 mm or twice the thickness of the fire-box plate, whichever is
greater. In the case of screwed threads the diameter shall be measured over the978 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
threads.The pitch of the stays at the fire-box shall not exceed 14 times the thickness of
the fire-box plate.
478. Fire-box crown stays for Loco-type boilers.─(1) Where fire-box crown stays are
directly attached to a semi-cylindrical outer casing, and the fire-box top is chambered and
fitted with stays arranged as shown in Figure 12/94, the thickness of the outer casing shall
be sufficient to provide not less than three engaging threads, of which not less than one shall
be full thread in stays not normal to the stayed surface, but if the thickness of the plate is not
sufficient to give one engaging full thread, the plate shall be reinforced.
(2) Where vertical stays only are used to take part of the load on the fire box top,
boilers with shells 1370 mm diameter and over shall be fitted with transverse stays (see
Figures 12/95. Stays may be attached as shown in Figures 12/47, 12/48 and 12/49.
479. Longitudinal bar stays.─ (1) The maximum allowable working pressure for
longitudinal bar stays shall be calculated from the one appropriate formula out of the
following two formulae:
C 1.28 2 Equation(12/19)
P = --- D - -------
A N
C x D 2
1
P = ---------- Equation (12/20)
A
Where,
P = is maximum allowable working pressure in kg/cm2 (g),
D = is diameter of stays over threads in mm,
D = is diameter of a body of stays at its smallest part in mm,
1
N = is the number of threads of stay per mm,
A = is area in square mm supported by one stay,
C = is values given in Table 12/8 below.
TABLE 12/8: Stress on Longitudinal Bar Stays
Serial Range of Tensile strength of bar Value of C
number (kg/cm2) (kg/cm2)
(1) (2) (3)
1 3656 - 4218 551.90966
2 3937- 4500 607.45216
3 4218 - 4781 655.26089
4 4500 - 5062 717.13102[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 979
(2) Where bar stays are fitted in vertical boilers, not less than four bar stays shall be
fitted to boilers of 1200 mm and over but under 1500 mm in diameter; five bar stays
to boilers of 1500 mm and over but under 1800 mm in diameter; six bar stays to
boilers of 1829 mm and over in diameter.
(3) In no case, shall the diameter of the stay at any part be less than 25 mm. Where
joined stays are fitted, the strength of the knuckle joint employed shall be at least
equal to the strength of the remainder of the bar stay.
480. Loads on stay tubes and bar stays.─Requirements of regulation 121 shall apply.
481. Flat plate margins.─ (1) The amount of support in relief of the stays which may be
attributed to the shell, furnaces or flues to which flat plates are attached, shall not exceed
that determined by the following formulae:
( )
Width of margin in mm = Equation(12/21)
√
Where,
t is plate thickness in mm
P is maximum allowable working pressure in kg/cm2 (g)
C = 0.92008 for plates exposed to flame.
C = 0.98107 for plates not exposed to flame.
(2) Where the plates are flanged, the margin shall be measured from the
commencement of curvature of flanging, or from a line 3½ times the thickness of the
plate measured from the outside of the plate, whichever is nearer to the flange.
Where the flat plate is not flanged for attachment to the shell or flue tubes and is
welded as shown in figured 12/12 or 12/17, the width of the margin shall be
measured from the inside of the shell or the outside of the flue tube, whichever is a
applicable.
(3) In no case, however, shall the diameter ‗D‘ of the circle forming the boundary of the
margin supported by the uptake of a vertical boiler be greater than that found by the
following formula:
√ Equation(12/22)
Where,
A is cross sectional area of the uptake tube in square mm,
P is maximum allowable working pressure in kg/cm2 (g),
d is external diameter of uptake in mm.
PART-11
482. Breathing space.─Breathing spaces as provided in regulations 483,484 or 485shall be
provided depending on the design of the boiler with special attention to the provision of sub-
regulation (9) of regulation 407 regarding furnaces.
483.For boilers as perclause (a)of sub-regulation(9)of regulation407.─980 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(1) Stays shall be arranged to give sufficient breathing space around the furnace
connections and tube nests (see figure 12/91 and 12/93), and shall divide the
unstayed areas equally.
(2) (a) In case of multi-tubular boilers,for both front and rear attachment of
furnaces, the breathing spaces between furnace and tube nests or between
furnace and shell shall be minimum of 50 mm or 5% of the shell inside
diameter, whichever is larger, with a maximum requirement of 100 mm.
(b) Clearances between the furnace and wet-back wrapper plates shall not
require consideration as breathing spaces.
(c)In the case of reverse flame boilers, the breathing space at the front end
between furnace and the tube nests shall be not less than 50 mm and the
breathing space formed by the outer-annular area of the furnace rear plate
shall be not less than 50 mm or 5% of the shell inside diameter, whichever is
larger, with a maximum of 100 mm.
(d) Breathing spaces between gusset or link stays and tube ends shall be not
less than 100 mm. Clearances between the tubes and wet-back wrapper
plates shall not require consideration as breathing spaces.
(e )Breathing spaces between tubes and shell shall not be less than 40 mm.
(f) Breathing spaces between gusset or link stays and furnaces shall be not less
than 200 mm except that for shell outside diameters exceeding 1800 mm and
furnace length exceeding 6000 mm they shall be not less than 250 mm and
for shell outside diameter less than 1400 mm and furnace lengths less than
3000 mm they shall be not less than 150 mm.
(g) All other breathing spaces shall be a minimum of 50 mm or 3% of the shell
inside diameter, whichever is larger, with a maximum requirement of 100 mm.
(3) (a) ForCornish and Lancashire boilers, the circle defining the breathing
spaces shall be as shown in Figure 12/89i.e. the distance ‗AB‘ between the
centre of the stay circle and the centre of the flue shall be not less than
3e+63, where, ‗e‘ is the thickness of the endplate in mm.
Note: For Lancashire boilers, the proportions shown in Table 12/9 given below are
recommended for the portion of the end plates above the furnace and flues.
TABLE 12/9: Breathing Space for Lancashire Boilers
Thickness of end plate (in mm) 13 14 16 18 20 Over 20
Breathing space (in mm) 255 280 305 330 330 340
(see Figure 12/70)
(b) It is recommended that the breathing space below the flue be approximately
one-half of the dimensions given in Table 12/9.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 981
484.Forboilers as per clause (d) of sub-regulation(9) of regulation 407.─ (1) Stays shall
give breathing spaces around the furnace connections and tube nests (see Figures
12/86 to 12/93, 12/96, 12/97, 12/98, 12/99 and 12/100) and equally divide the unstayed
areas. Breathing spaces between furnace and tube nests shall be a minimum of 50 mm
or 5% of the shell outside diameter, whichever is larger, but need not be more than 100
mm.
(2)Breathing spaces between furnace and shells shall be as given in Table 12/9 or 12/10
as applicable, but shall be not less than 50 mm or, for bowling hoop furnace, not less
than 75 mm as measured from the outside diameter of the bowling hoop.
(3) For the boilers having more than one furnace, breathing spaces between furnaces shall
be not less than 120 mm.
(4) Breathing spaces between gusset or link stays and furnaces shall be not less than 200
mm, except foras under;
Shell outside diameter >1800 mm 250 mm
or furnace length >6000 mm
Shell outside diameter <1400 mm 150 mm
or furnace length <3000 mm
(5) Breathing spaces between gusset or link stays and tube nests shall be not less than 100
mm.
(6) When unflanged flat endplates as used, the breathing spaces between gusset or link
stay and furnaces shall be increased as follows:
Increase 200 mm to 220 mm
Increase 250 mm to 275 mm
Increase 150 mm to 165 mm
Increase 100 mm to 110 mm
(7) All other breathing spaces shall be a minimum of 50 mm or 3% of the shell outside
diameter whichever is larger but need not be more than 100 mm.
Table 12/10: Breathing spaces between furnaces and shells when tube plate thickness
does not exceed 25 mm (See Table 12/11 also)
Design Length between the boiler end plates Breathing space
L in meter
% of outside Maximum
diameter (Note) mm
(1) (2) (3) (4)
Inserted flat ends < 5.5 5 100
5.5 < L< 6.0 5.5 110
6.0 < L< 6.5 6 120
Flanged ends Any length 5 100
Note: But not less than 50 mm or, for bowling hoop furnaces 75 mm.
(8) When the actual thickness of the end plate exceeds 25 mm, the breathing spaces in
accordance with Table 12/10 shall be increased in accordance with Table 12/11.982 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Table 12/11: Breathing spaces between furnaces and shells when the thickness of the
end plate exceeds 25 mm
Length of furnace Breathing space
inmeter % of d. Need note be Minimum
more than mm mm
(1) (2) (3) (4) (5)
< 5.5 6.5 130 65
5.5 < L < 6.0 7.0 140 70
6.0 < L < 6.5 8.0 150 75
485.For Boilers not covered under regulations 483 and 484.─(1)Gusset stays shall be
arranged to give sufficient bearing space around the furnace connections and tube nests (see
figures 12/86 to 12/93, 12/96, and 12/97 to 12/100). The proportions shown in Table 12/12 are
recommended for the portion of the end plates above the furnace and the flues.
Table 12/12: Breathing Space
Serial Thickness of end plate Dimension ‘L’ mm
number mm
(1) (2) (3)
1 < 13 255
2 > 13< 14 280
3 > 14 < 16 305
4 > 16 < 20 330
5 > 20 340
(2) The breathing space below the flues shall be approximately one-half the dimensions
given in Table 12/12.
(3) For gusset stays above the tube nests, as fitted in multi-tubular waste heat boilers without
internal furnaces, a breathing space of 20.3 mm from the centre line of the adjacent tubes
to the toe of the gusset angle or plate, may be maintained. For the back end stays below
the furnace of multi-tubular dry back boilers, a breathing space of 152 mm may be
maintained where the flues are constructed in accordance with regulation 407.
(4) Where the flues are constructedof corrugated sections welded together, a breathing space
of 114 mm may be maintained.
486. Gusset Link, brace and similar stays.─ (1) For welded Lancashire, Cornish and
Cylindrical Horizontal Multi-tubular type boilers, all welded gussets stays shall not be used.
To ensure flexibility, link stays, bar stays, brace stays other than the all-welded type shall be
used. All welded gusset stays, however, may be used in cylindrical horizontal waste heat
and cylindrical vertical multi-tubular boilers.
(2) Welded gusset stays and brace may be used for welded Lancashire Cornish and
Cylindrical Horizontal Multi-tubular type boilers provided their method of attachment is
approved by the inspecting Authority.
(3) Each gusset or link stay supporting the flat end plate of a boiler shall be designed to
carry the whole load due to pressure on the area it supports. The areas supported by any
one stay shall be obtained by considering the total area to be supported which lies within[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 983
the limits of the flat plate margins and dividing this area by boundary lines drawn between
the stays. These boundary lines shall be at all points equidistant from the adjacent points of
support in the area under consideration.The effective uniformly distributed load on a
triangular gusset plate or on a diagonal link stay shall be assumed to be equal to the
perpendicular load on the portion of the end plate to be supported (determined as above)
multiplied by L/L1 (see Figures 12/101, 12/102 and 12/103).
(4) (a)Gusset plates shall be so proportioned that the angle "V" (see Figures 12/101and
12/102), is not less than 60°.
(b) The thickness of the gusset plate shall be such that the stress in the plate to
withstand the effective uniformly distributed load (as defined above) calculated on the
smallest cross-section on line XX or YY (Figure 12/101and12/102), shall not exceed
one-seventh of the minimum tensile stress of the plate used but in no case shall the
thickness be less than seven-eighths of the thickness of the shell, plate with a
minimum of 11 mm.
(c) Where all-welded gusset stays are used a stiffening plate shall be welded at the toe
of the gusset where it is secured to the end plate i.e. where the maximum stress
occurs, (see Figure 12/101).
(5) Link stays shall be so arranged that the angle "V" (figure 12/103) is not less than 600 and
the dimensions shall be such that stress in the stay at its weakest part does not exceed
one-seventh of the minimum tensile stress of the plate used.
(6) The strength of anchor plates, angles and link pins calculated at the weakest section shall
be as follows:
(a) Link pins shall be so designed that the shear stress does not exceed 562 kg/cm2, the
strength of pins in double shear being taken as 1.875 times the strength of pins in
single shear.
(b) Anchor plates or angles shall be so designed that the calculated stress does not
exceed one-seventh of the minimum tensile stress of the material used, but in no
case shall the thickness be less than seven-eighth of the thickness of the shell plate
with a minimum of 12.7 mm, nor the length of the portion attached to the end plate be
less than the distance between the lines of end to shell flat margin and the breathing
space line around the flues of tube nests.
(7) (a)Where gusset plates, anchor plates or angles are welded to the shell and/ or end plates,
the attachments shall be by mean of continuous fillet welds on each side or by butt-welds
prepared in accordance with following paragraph and detailsl, m, n, or p of Appendix –J.
(b) The welds shall be of such dimension that the stress calculated on an area equal to
the effective length of the weld multiplied by the effective throat thickness shall not
exceed that permitted for the parent metal multiplied by the appropriate weld factor in
Table 12/13.
(c)The effective length of a weld shall be taken as that length of weld which is of the
specified size throughout.984 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(d) For open-ended fillet welds the effective length shall be the overall length less twice
the weld size.
(e) For the purpose of stress calculation, the effective throat thickness of a butt weld shall
be taken as the thickness of the gusset or another plate and the effective throat
thickness of fillet weld shall be taken as 0.7 of the fillet size. For compound welds the
effective thickness shall be the sum of those of the constituent parts.
Table 12/13: Weld attachments
Form of weld Weld factor
Not stress relieved Stress-relieved
(1) (2) (3)
Single J or bevel butt-welds Unsealed 0.35 0.45
(with or without superimposed fillet)
Sealed 0.60 0.70
Double J or bevel butt-welds
(with or without superimposed fillets) 0.60 0.70
Double fillet welds 0.55 0.65
PART-12
Furnaces, furnace components, wet-back reversal chambers and fire boxes of
cylindrical form subject to external pressure
487. Furnaces.─ (1) The mean diameter of furnace shall not exceed 1800 mm.
(2) Notations shall be as under:
b = is the pitch of the furnace corrugations (in mm);
C = is the corrosion allowance = 0.75 mm;
d = is the mean diameter of furnace (in mm) (see Note 1);
d = is the maximum mean diameter of the furnace (in mm);
max
d = is the minimum mean diameter of the furnace (in mm);
min
e = is the furnace plate thickness (in mm);
E = is Young's modulus of elasticity (in kg/cm2) at the design temperature.
E = the specified minimum elevated temperature yield stress or the 0.2% proof
t
stress at the design temperature (in kg/cm2) as available in the governing
codes of the country of the material to which it belongs;
F = is the cross-sectional area of a longitudinal section of the corrugated furnace
wall, of length b and thickness (e-c) (in mm2) [see figures 12/119(Fig.A to
Fig.G);
I = is the second moment of area of one complete corrugation about its neutral
axis, excluding the corrosion allowance (in mm4);
I = is the second moment of area of plain stiffener section (see figures
s
12/29and12/30) about its neutral axis, including a length of the furnace of
0.55√ (de) on each side of the stiffener (in mm4) (see Note 2);
L = is the distance between the centre of two effective points of support (in mm)
(see Note 3);
P = is the maximum allowable working pressure (in kg/cm2)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 985
S = is the factor of safety:
1
= 2.5 for furnace in Class I and Class II boilers
= 3.5 for furnace in Class III boilers
= 2.0 for furnace and wrapper plates not exposed to flame;
S = is the factor of safety:
2
= 3.0 for Class I and Class II boilers
= 3.9 for Class III boilers
u = is the percentage out of roundness to be taken as 1.5 for plain furnace and
1.0 for corrugated furnace;
W = is the depth of corrugation (in mm).
Notes:
1. For corrugated furnace, mean diameter is equal to inside diameter plus full depth
of one corrugation referred to in Fig. 12/119 which is equal to the inside diameter
+e+W.
2. When calculating I , it is only necessary to take into account a corrosion
s
allowance on the furnace gas side.
3. Stiffeners complying with Figures 12/29and12/30boiler and reversal chamber
end plates are considered to be effective points of support.
4. The design temperature of the furnace = Cs + 4e +15 (saturation temperature
plus four times the thickness of the furnace plus 15).
(3) Evaluation of Young‘s modulus at the design temperature. Value of ‗E‘ shall be
obtained from the following table (by linear interpolation if required):
Table 12/14
Serial Design temperature in °C Value of E in Kg/cm2 x 103
number
(1) (2) (3)
1 250 1987
2 300 1947
3 350 1896
4 400 1845
5 450 1814
488.Plain furnaces.─ (1) The maximum allowable working pressure of plain furnaces
shall be the lower of those obtained using equations 12/23 and 12/24 as follows, but the
thickness shall be not less than 7 mm and shall not exceed 22 mm:
-
[ ] Equation (12/23)
u
- ( )
( )
Equation (12/24)
(2) Equation 12/23 and 12/24 may be expressed in terms of thickness using equation 12/25
and 12/26 respectively as follows and the greater of the thickness obtained shall be used.986 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Equation (12/25)
Where,
Equation(12/26)
(3) If the furnace/ combustion chamber has tubes radially to it, the thickness of that
portion of the furnace is to be increased by the value of ligament efficiency.
489.Furnace components.─The thickness of furnace components, e.g. ash drop-out
tubes and fuel inlet connections, shall be calculated in accordance with regulation 488
with a minimum thickness of 10 mm and a maximum thickness of 22 mm.
490.Corrugatedfurnaces.─The maximum allowable working pressure of corrugated
furnaces shall be determined using the equation 12/27, but the thickness shall not beless
than 10 mm and shall not exceed 22 mm. Calculated value of ‗I‘ and ‗F‘ for some of the
corrugations are given in figure 12/119 for other shapes and sizes calculations need to
be made from basic principles.
( )
Equation (12/27)
[ ]
{ ( ) }
491.Tolerances and allowances.─The calculated wall thickness contains a fixed
allowance of 0.75 mm for corrosion and wear. For corrugated furnaces, the calculated
wall thickness shall be the minimum thickness of the finished furnace. For plain furnaces
and reversal chambers, allowance shall be made to take account of any minus
tolerances on the plate thickness.
492.Out-of-roundness.─(1) The percentage out-of-roundness is as follows:
200 (d - d
max min)
u = ---------------------Equation (12/28)
d d
max + min[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 987
(2) This shall be included in the calculation as u = 1.0 for corrugated furnaces and u = 1.5 for
plain furnaces.
493. Stiffeners.─ (1) Stiffeners shall have second moment ofinertianot less than that
given by the following equation:
Pd3 L
Is = ----------------Equation (12/29)
1.35 107
(2) (a)If the stiffeners are made in sections from bar or plate, the abutting ends shall
be prepared so as to ensure that full penetration welds are made.
(b) The thickness of the stiffening ring shall be kept to the minimum required (for
limiting dimensions see Figures 12/29and12/30).
(3) Bowling hoops are considered as effective points of support. The minimum pitch of
bowling hoop centres shall be not less than 500 mm. If bowling hoops are used, the
furnace thickness shall be calculated fromregulation 488. The dimensions of bowling
hoops shall be in accordance with figures 12/120(Fig. A , Fig B and Fig C)and their
second moment of area determined from the tables given in these figures, shall be
not less than required by sub-regulation (1).
(4) If corrugated furnaces are equipped with several stiffeners, e.g. one on each
corrugation or on each second corrugation, the cross-sectional area and the second
moment of area of the stiffeners shall also be taken into consideration when using
the equation 12/27. A height of not more than four times the furnace thickness shall
be used for the calculation.
494.Circular reversal chambers. ─ (1) (a) The thickness of wrapper plates of cylindrical
reversal chambers of horizontal multi-tubular boilers shall be calculated in accordance
with the equations given in regulation 488. The thickness shall be not greater than 35
mm and shall be not less than 10 mm.
(b) However, the design temperature for reversal chamber wrapper plates shall be
determined in accordance with the following equations: -
t = (t + 2e ) or (t + 50) whichever is greater.
s 2 s
Where, t = Design temperature (in degree centigrade)
t = Saturation temperature of water (in degree centigrade) at the
s
maximum allowable working pressure, for both steam or hot water
boilers.
e = nominal plate thickness (in mm).
2
(2) (a) The thickness of access tubes shall be calculated in accordance with
regulation 488with a minimum thickness of 10 mm.
(b) However, the design temperature for access tubes shall be determined in
accordance with the following equations: -988 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
t = (ts + 2e2) or
(ts + 50) whichever is greater.
Where, t = Design temperature (in degree centigrade)
t = Saturation temperature of water (in degree centigrade) at the
s
maximum allowable working pressure, for both steam or hot water
boilers.
e = nominal plate thickness (in mm).
2
495. Plain furnaces of vertical boilers.─(1) The maximum allowable working pressure of
plain furnaces of vertical boilers shall be the lesser of the two values obtained by Equations
(12/23) and (12/24).
Where,
D = external diameter of the fire-box in mm. Where the firebox is tapered the
diameter taken shall be the mean of that at the top and at the bottom where it
meets the substantial support from the flange or ring,
L = is length of the firebox in mm between points of substantial support measured
from the commencement of flange curvature or from the foundation
connection, or from a row of screwed stays which comply with regulation 416
and sub-regulation (3) of regulation 477, whichever is applicable.
(2) The thickness shall be not greater than 22 mm and shall be not less than 10 mm.
496.Corrugated fireboxes of vertical boilers.─ (1) For the semi-spirally corrugated
fireboxes of ‗Sentinel‘ standard motor wagon boilers the maximum allowable working
pressure shall be determined by the following formula:
( )
Equation (12/30)
Where,
P is maximum allowable working pressure in kg/cm2(g)
t is thickness of the firebox plate in mm
D is mean of the external diameters of firebox measured over the plain part at each
end at commencement of curvature of flange in mm
C = 27.41972
(2) No corrugated furnace shall be less than 10 mm thick.
497.Hemispherical furnaces of vertical boilers.─ (1) When furnaces are hemispherical in
form and subject to pressure on the convex side and are without support from stays of any
kind, the maximum allowable working pressure shall be found by the following formula:
( )
Equation (12/31)
where
P is maximum allowable working pressure in kg/cm2 (g)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 989
t is thickness of the top plate in mm.
R is outer radius of curvature of the furnace in mm.
(2) The thickness of these furnaces shall in no case exceed 22 mm.
PART-13
498. Foundations of Vertical Boiler Furnaces.─When circular furnaces of fireboxes of
vertical boilers are not connected to the shell crown by uptake tube, smoke tubes or bolt
stays and the whole load on the firebox vertically is borne by the bottom part of the firebox
where it is connected to the shell, the maximum allowable working pressure for the part, if
firebox is joggled out to meet the shell or if any ogee ring is fitted, shall not exceed that found
by the following formula:
( )
Equation (12/32)
( )
Where,
P is maximum allowable working pressure in kg/cm2 (g)
t is thickness of the joggled firebox plate or ogee ring in mm.
D is inside diameter of the boiler shell in mm.
D is outside diameter of the joggled firebox in mm at the commencement of curvature
1
above joggled part or the outside diameter of the firebox where it joins the ogee ring.
C = 9.84297 for Ogee rings (see Fig 12/34 and 12/35)
C = 7.03070 where ‗U‘ ring section is used (see Fig. 12/36).
499.Foundations of Locotypeboiler fireboxes.─ (1) Where the firebox roof in locotype
boilers is not stayed direct to the external casing crown or to girders carried by the casing or
if not connected to the casing by slings,the maximum allowable working pressure for the
parts, if plates are joggled out to meet the casing or if an ogee ring is fitted, shall not exceed
that found by the following formula:
(t – 1) x (L + W)
P = 70 ---------------------- Equation (12/33)
L + W (W – W )
1
Where, P = is maximum allowable working pressure in pounds per square inch,
t = is thickness of the joggled firebox side plates of firehole plate (whichever is
less) or ogee ring in thirty-seconds of an inch,
L = is length of firebox casing in inches measured between the water sides of
front end plate and saddle plate at the foundation seam,
W = is width firebox casing in inches measured between that water side of
casing side plates at the foundation seam,
W = is width of firebox in inches measured between the water sides of firebox
1
side plates at the commencement of curvature above joggled part of where
it joins the ogee ring.
(2)Where only a comparatively narrow strip of the firebox roof is stayed directly to the
casing crown the area so stayed shall be deducted from the area represented by‗L x W‘ in
the bottom line of the formula thus:990 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(L x W– A) (W – W ) and so used is Equation (12/33) in determining the working
1
pressure for the parts. ―A‖ being the area in square inches of the part of roof supported by
the casing crown.
500. Uptakes of vertical boilers.─ (1) The maximum allowable working pressure for uptake
tubes of vertical boilers shall be determined by the following formula:
(i) When an internal liner is not fitted:
( )
Equation(12/34)
(ii) When an internal liner is fitted extending below the low water level:
( )
Equation (12/35)
( )
Where,
P is maximum allowable working pressure in kg/cm2 (g)
t is thickness of the uptake in mm.
D is external diameter in mm.
L is length of the uptake in mm, measured between the circumferential seams.
(2) In no case, the thickness of an uptake tubeshall be less than 10 mm.
501.Cross tubes.─ (1) Internal diameter of cross tubes shall not exceed 305 mm. The
maximum allowable working pressure of the tunes shall be determined by the following
formula:
( )
Equation (12/36)
Where,
t = is thickness in mm of the cross tube,
D = is internal diameter in mm of the cross tube.
(2) In no case, thethickness of a cross tube shall be less than 8 mm.
502.Pads welded to shell or the attachment of flanged mountings.─The size of outer
peripheral fillet welds by which circular pads are attached to shell plates shall be determined
by the Equation (12/37), but shall in no case be less than the inner welds or nor less than the
minimum specified for plate thickness in Table 12/3:
2A – D L
1 1
L = ------------- Equation (12/37)
o
D
Where,
L is size of fillet weld around outer periphery of pad, in mm,
o[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 991
L is size fillet weld around inner periphery of pad, in mm,
1
A is cross-sectional area of opening in shell (based on minimum thickness in square
mm see regulation 463 ),
D is outer diameter of pad, in mm,
D is inner diameter of pad, in mm.
1
503.Hydraulic test.─ (1) (a) Each Class I Boiler shall, on completion of all welding and/or
repairs and after heat-treatment, be subjected to a hydraulic test of 1.5 times the design
pressure without any indication of weakness or defect.
(b) Each Class II and Class III Boiler shall be tested to a pressure twice the design
pressure.
(2) (a) The test shall be witnessed by the Inspecting Authority or Competent Person.
(b) The test pressure shall be maintained for a period not less than 30 minutes.
(c) In the interest of safety,it is importantthat the boiler be properly vented, so as to
prevent the formation of air pockets, before the test pressure as applied.
Notes:
1. It is recommended that the temperature of the water shall not be less than 7°C during the
hydraulic test.
2. It is further recommended that before the boiler is approached for close examination, the
pressure shall be reduced to not less than 1.1 times the design pressure and not more
than 0.9 times the hydraulic test pressure.
3. On completion of hydraulic test, release of pressure shall be gradual.
4. Deflection of different pressure parts shall be examined carefully and there shall not be
any permanent set after release of pressure.
(3) If any repairs are found to be necessary during or subsequent to the hydraulic
pressure test, the boiler shall again be subjected to the pressure test specified above
after completion of the repairs and after any heat treatment provided repaired weld
joint requires heat treatment as per regulation 453.
Note: Observations and remarks of Competent Person/ Inspecting Authority shall be
recorded for filing with maker‘s papers.
504.Safetyvalves.─Boiler shall be provided safety valves complying with regulations 192 to
219, with following changes:-
(i) The safety valves shall be reset at a pressure at least 2.5% below, but not more than 5%
below the safety valve set pressure.
(ii) The 5% limit is increased to 10% for valves having a body seat bore less than 32 mm and
or having a set pressure of 24 bar gauge or less.992 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CROSS BEAMS IN END PLATES
Fig. 12/2
Fig. 12/1
GOUGED OUT BEFORE APPLYING WELD FROM SECOND SIDE
Fig. 12/3
Fig. 12/4
Fig. 12/5
Fig. 12/6[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 993
Fig. 12/7
Fig. 12/8: Flanged End Plates Ends
Thicker Than Shell
All dimensions are in mm.
Fig. 12/10: Flanged Flat End Plates
Fig. 12/9: Flanged End Plates Ends Thicker
Than Shell
Fig. 12/11: Flanged Flat End Plates to Shell Fig. 12/12: Flat End
(Shell Thicker than Ends)994 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/14: Attachment of Flues to End
Plates – Dished or Flat
Fig. 12/13
All dimensions are in mm.
Fig. 12/16: Flue Connections to End
Fig. 12/15
Plates (Dished or Flat)
Fig. 12/17: Flue Connections to End
Plates (Dished or Flat)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 995
Fig. 12/18
Fig. 12/19
Fig. 12/20
Fig. 12/21 Fig. 12/22
All dimensions are in mm.996 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)][भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 997
Fig. 12/24: Reverse Fired Boiler
Fig. 12/25: Dry Back Boiler
Fig. 12/26: Wet Back Boiler
Fig. 12/27: Semi-Wet Back Boiler
Fig. 12/28: Semi-Wet Back Boiler
Fig. 12/29: Plain Bar
All dimensions are in mm.998 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/30: Bulb Bar Stiffeners for
Fig. 12/31: Bowling Hoop
Horizontal Flues
Fig. 12/33: Detail Flue Joint
Fig. 12/32: Bowling Hoop
Fig. 12/34
Fig. 12/35[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 999
All dimensions are in mm.
Fig. 12/36 Fig. 12/37: Foundation Rings
Fig. 12/39: Foundation Rings
Fig. 12/38: Foundation Rings
Fig. 12/40: Firehole Mouthpiece
Fig. 12/41: Firehole Mouthpiece
All dimensions are in mm.1000 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/43: Welding of Flue Pipes
Fig. 12/44: Throat Piece[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1001
Fig. 12/46
Fig. 12/45
Fig. 12/47: Attachment of Firebox and Fig. 12/48: Attachment of Firebox and
Combustion Chamber Stays Combustion Chamber Stays
All dimensions are in mm.
Fig. 12/49: Attachment of Firebox and
Combustion Chamber Stays
Fig. 12/51: Attachment of Bar Stays1002 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/52: Attachment of Bar Stays
Fig. 12/50: Attachment of Firebox and
Reversal Chamber
Fig. 12/54: Attachment of Bar Stays
Fig. 12/53: Attachment of Bar Stays
All dimensions are in mm[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1003
Fig. 12/56: Attachment of Bar Stays
Fig. 12/55 :Attachment of Bar Stays
Fig. 12/57: Attachment of Bar Stays
Fig. 12/58: Attachment of Bar Stays
Fig. 12/59: Attachment of Bar Stays Fig. 12/60*
All dimensions are in mm.1004 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/61* Fig. 12/62*
Fig. 12/64: Typical Methods of Fittings
Fig. 12/63*
Welded Grinders to Welded Combustion
*TYPICAL METHODS OF FITTING Chambers and Fireboxes
WELDED GRINDERS TO WELDED
COMBUSTION CHAMBERS AND
FIREBOXES
Fig. 12/65: Fusion Welded Oval Manhole
Frame Fig. 12/66[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1005
Fig. 12/68: Welding Detail For Manhole in
Fig. 12/67
Flat End Plate
All dimensions are in mm.1006 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/70: Typical Mild Steel Distance
Piece for Mountings
Fig. 12/69
1. Tensile Test for Seam.
2. Impact Test outer surface of plate.
2a & 2b. Impact Re-test outer surface of plate.
3. Impact test Inner surface of plate.
3a & 3b. Impact re-test inner surface of plate.
4. Tensile test for all-weld metal.
5. Normal bend test-outer surface in tension.
6. Reverse bend test-inner surface in tension.
7. Micro and macro tests.
Fig. 12/71: Details of Test Plates
Fig. 12/72[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1007
Fig. 12/73: Specimen 1A – Reduced Section Tensile Specimen
All dimensions are in mm.
Fig. 12/751008 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/74: Reduced Section Tensile Specimen
in a Thick Plate
SPECIMENS (2) AND (3) IMPACT TEST
Fig. 12/76: Izod Impact Test Pieces
Fig. 12/79: Details of Test Plates
Fig. 12/77: Tensile Test All-Weld Metal[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1009
Fig12/81: Tubes to be Lightly Expanded
into the Plate before Welding
Fig. 12/80: Compensation for Branch
All dimensions are in mm.1010 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/78
All dimensions are in mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1011
Fig. 12/83: Tubes to be Lightly Expanded into
the Plate Before Welding
Fig. 12/82: Typical Attachment of Plain
Tubes
All dimensions are in mm.
Fig. 12/84: Typical Attachment of Stay Tubes1012 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/85
Fig. 12/86: Typical Arrangement of End Plates on Lancashire Boilers
All dimensions are in mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1013
Fig. 12/90*: Typical Arrangement of End
Plates of Economic Boilers
Fig. 12/87: Typical Arrangement of End
Plates on Lancashire Boilers
Fig. 12/88: Typical Arrangement of End
Plates ornish Boilers
Fig. 12/91*: Typical Arrangement of End
Plates on Economic Boilers
Fig. 12/89: Typical Arrangement of End
Fig. 12/92*: Typical Arrangement of End
Plates on Cornish Boilers1014 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Plates on Multi-Tubular Boilers
*See Regulation406 for various methods of
attachment of end plates to shell and furnaces.
All dimensions are in mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1015
Fig. 12/97: Some of the Breathing
Spaces in Small Type Boilers
Fig. 12/93: Typical Arrangement of End
Plates on Multi-Tubular Boilers
For Other Method of Attachment See Figs.
12/47, 48& 49 Fig. 12/98: Some of the Breathing
Spaces of Reversible Flame Boilers
Fig. 12/94: Arrangement of Firebox Crown
Stays for Locomotive Boilers
Fig. 12/95: Arrangement of Firebox Crown Fig. 12/99: Some of the Breathing
and Transverse Stays for Locotype Boilers Spaces in Boilers with more than one
Furnace1016 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/96: Breathing Space
All dimensions are in mm.
Fig. 12/100: Some of the Breathing
Spaces of Stepped Furnace
Fig. 12/101: Typical Details For All-
Welded Gusset Stay
1. B. Sp. between Gusset/Link Stays and
Furnace.
2. B. Sp. between Furnace and Tubes/Tube Nest.
3. Outer Diameter of Furnace.
4. B. Sp. between Gusset/Link Stays and
Tubes/Tube Nest.
5. B. Sp. between Shell and Tubes/Tube Nest.
6. B. Sp. between Furnace and Shell.
7. Inner Diameter of Shell.
8. Inner Diameter of the Furnace.
9. B. Sp. at the Front End between Furnace and
Tubes/Tube Nest.
10. B. Sp. formed by the outer annular area of the
Furnace Rear Plate.
11. Stepping in terms of radius.
12. Outer Dia. of the highest diameter portion of the
Stepped Furnace.
13. Outer dia. of the lowest diameter portion if the
Stepped Furnace. Fig. 12/102: Typical Details for Welded
and Pinned Gusset Stay[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1017
Fig. 12/103: Typical Details for Diagonal Stays
(Chain Lines Indicates Stay with Multiple Links)
All dimensions are in mm.1018 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/105
Fig. 12/104: Minimum Weld Attachment For
Stand Pipes Up to and Including 127 mm
Bore Not Requiring Compensating Plates
All dimensions are in mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1019
Fig. 12/108: Set in Branches (Full Penetration Weld)1020 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/109: Standard Weld Preparation Detail
All dimensions are in mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1021
Fig. 12/110: Set in Branches with Added
Compensation Rings
Fig. 12/113: Minimum Weld Attachments
ForStandPipes up to and including 127
mm Bore Requiring Compensation
Plates
Fig. 12/111: Minimum Weld Attachment
ForStandPipes Over 127 mm Bore
Requiring Compensation Plates
Fig. 12/112: Minimum Weld Attachment
ForStandPipes Over 127 mm Bore
Requiring Compensation Plates
Fig. 12/114: Welded on Flange
All dimensions are in mm.
Fig. 12/1171022 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/115: Pads Welded on For Studs
Fig. 12/116
Fig. 12/118: Typical Preparation and
Assembly of Set on Right Angle
Branches Without Backing
Fig. 12/119: Second Moments of Area and Cross-Sectional Area F (Contd.)…
All dimensions are in mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1023
Fig. 12/119: Second Moments of Area and Cross-Sectional Area F (Concluded).
All dimensions are in mm.1024 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 12/120[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1025
CHAPTER-13
QUALIFICATION TESTS FOR WELDERS AND WELDING
OPERATORS ENGAGED IN WELDING AND REPAIR OF BOILERS
AND BOILER COMPONENTS, PIPES, HEAT EXCHANGER AND
HEAT EXCHANGER COMPONENTS UNDER CONSTRUCTION,
ERECTION AND FABRICATION AT SITE.
505.Application.─ (1) These regulations shall apply to testing of welders and welding
operators engaged in welding and repair of boilers and boiler components, steam-pipes,
heat exchanger and heat exchanger components of ferrous and nonferrous material under
construction, erection and fabrication at site.
PART-1
Definitions
506. Welder.─ Welder means a person who performs manual or semi-automatic welding.
507.Welding operator.─ Welding operatormeans a person who operates machine or
automatic welding equipment.
508. Reasonable continuity of service.─The continuity of service of the welder orwelding
operator shall be considered as continuity of service if heretains the initial skill level though
not engaged in welding for a period of upto six months.
509. U-Number.─(1) U Number grouping of electrodes and welding consumables in table
13/5 of regulation 520 is based essentially on their usability characteristics, which determine
the ability of welders to make satisfactory welds with a given welding consumables.
(2) This grouping is intended to reduce the number of welding performance qualifications.
PART-2
Welding Positions
510.Plate groove welding.─The welding positions as mentioned in Figure 13/1 of this
chapter shall be as following,namely:-
(i)Flat position 13/LGF; Plate in a horizontal plane with the weld metal deposited from
above.
(ii) Horizontal Position 13/LGH; Plate in a vertical plane with the axis of the weld
horizontal.
(iii)Vertical Position 13/LGV;Plate in a vertical plan with the axis of the weld vertical.
(iv) Overhead Position 13/LGO;Plate in a horizontal plane with the weld metal
deposited from underneath.1026 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
511. Plate fillet welding.─The welding positionsas mentioned in Figure 13/2 of this chapter
shall be as following,namely:-
(i) Flat Position 13/LFF; Plates so placed that the weld is deposited with its axis
horizontal and its throat vertical
(ii) Horizontal Position 13/LFH;Plates so placed that the weld is deposited with its
axis horizontal on the upper side of the horizontal surface and against the
vertical surface.
(iii) Vertical Position 13/LFV;Plates so placed that weld is deposited with its axis
vertical.
(iv) Overhead Position 13/LFO;Plates so placed that the weld is deposited with its
axis horizontal on the underside of the horizontal surface and against the
vertical surface.
512. Pipe groove welding.─The welding position of pipe groove weldingas mentioned in
Figure 13/3 of this chapter shall be as following,namely:-
(i) Horizontal Rolled 13/PGR; Pipe with its axis horizontal and rolled during
welding so that the weld metal is deposited from above with the axis of the
weld horizontal.
(ii) Vertical Fixed 13/PGV; One test of groove welded joint with the axis of the
pipe in a vertical position and the seam welded circumferentially in a
horizontal position.
(iii) Horizontal Fixed 13/PGH; One test of groove welded joint with the axis of the
pipe in a horizontal position and the seam welded without rotating the pipe.
(iv) Pipe Inclined 13/PGI;One test of groove welded joint with the axis of the pipe
inclined 45 degree to the horizontal axis and the seam welded without rotating
the pipe.
FIGURE13/LGF: Plate Groove Flat Position FIGURE13/LGH: Plate Groove Horizontal
Position[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1027
FIGURE13/LGV: Plate Groove Vertical Position FIGURE13/LGO: Plate Groove Overhead
Position
Size: 16 x 150 x 400 mm -- 2 Nos.
TEST POSITIONS
FIGURE :13/1 PLATE GROOVE JOINTS
FIGURE13/LFH: Plate Fillet Horizontal Position
FIGURE13/LFF: Plate Fillet Flat Position1028 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
FIGURE13/LFV: Plate Fillet Vertical
Position
FIGURE13/LFO: Plate Fillet Overhead Position
Size: 16 x 75 x 300 mm -- 2 Nos
TEST POSITIONS
FIGURE13/2: PLATE FILLET JOINTS (TEE)
FIGURE13/PGR: PIPE Axis Horizontal FIGURE13/PGV: Pipe Axis Vertical
Welding from Top Flat Position (Pipe Rotated) Weld Horizontal position (Pipe Fixed)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1029
FIGURE13/PGH: PIPE Axis Horizontal FIGURE13/PGI: Pipe Axis Inclined at 45o
Weld All around (Pipe Fixed) Weld All around (Pipe Fixed)
Size: Pipe Dia 127.5mm x 12.5mm thick or more
Tube Dia 76.1mm X 8.8mm thick or less
TEST POSITIONS
FIGURE13/3 PIPE/TUBE GROOVE JOINTS
PART-3
513. Engagement of certified weldersorwelding operators.─ (1)No welderorwelding
operator shall be engaged for welding on boilers or steam-pipes under construction, erection
or fabrication at site or in the repair of boilers or steam-pipes, unless hepossesses a
certificate as required under the regulations and attains the agenot less than eighteen years.
(2) He shall have undergone a regular apprenticeship of two years from a recognised
Industrial training institute or haveat least one year regular on the job industrial
experience as a welder orwelding operator.
(3) The holder of such certificate shall be bound to produce it when called upon to do so by
the Inspecting Authority or Competent Person.
(4) In case of engaging experienced welders orwelding operators, reasonable continuity of
service shall be ensured by the employer before engaging them by maintaining proper
records of test conducted by the employing organisation.
514. Initial qualification test and issue of certificate.─ (1) Every welder or welding
operator shall meet the qualification requirement to the satisfaction of the Competent
Authority who shall assess hisperformance for qualifying for the certificate.
(2) The Competent Authority may, thereafter, issue a certificate in the Form-II indicating the
class and type of welding in which he has qualified.1030 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
515. Issue of duplicate certificate.─ (1)In case of loss of a certificate issued to a
welderorwelding operator in Form-XXI, a duplicate certificate may be issued by the
Competent Authority who issued the original certificate provided that the Competent
Authority is satisfied with the genuineness of the case.
(2) Fee for issue of duplicate certificate shall be as per regulation 331.
516. Validity of certificate.─ (1) The certificate issued to a welderorwelding operator under
these regulations shall remain valid for a maximum period of twenty-four months from the
date of issue, provided that the holder thereof has, subsequent to the test, been employed
with reasonable continuity on the class and type of work for which heis qualified.
517. Revalidation or renewal of certificate.─(1) The certificate may be renewed after the
validity of 24 months from the date of qualification from time to time, for a period not
exceeding twenty-four months at a time, in case the welder or welding operator is
continuously engaged in qualified process and certified by the organisation for which he is
working.
(2) The details of welding continuity shall be filled up in the Form-XX duly signed by the
organisation and preserved along with the original certificate and put up to Competent
Authority for renewal.
(3) In case of non-fulfilment of continuity criteria the welder or welding operator shall appear
for the re-qualification test to the satisfaction of the Competent Authority.
518. Revoking of qualification.─ (1) The performance qualification of a welder or welding
operator can be revoked by the Competent Authority if there is a specific reason to question
hisability to make welds that meet the specification.
(2) The qualificationthat support the welding that heis doing shall be revoked.
519. Hierarchy of qualifications.─ (1) (a) Initially, a welder or welding operator may be
qualified in carbon steel plate and subsequently, allowed to appear for qualification testing in
alloy steel plate, carbon steel or alloy steel pipe and tube qualification. or, a welderorwelding
operator may be tested for higher grades, pipe and tube directly.
(b) The range of qualification covered by testing of a particular grade of material or product
form shall be as shown in Table 13/1.
(2) The qualification certificate of such a welder or welding operator who has successfully
completed qualification test, may be extended as per regulation 517.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1031
Table 13/1. Range of qualification for a welderorwelding operator in material
and product form
Serial No. Tested with Qualified for
Carbon steel Carbon steel Alloy steel Alloy steel
plate pipe and tube plate pipe and
tube
(1) (2) (3) (4) (5) (6)
1. Carbon steel Yes No No No
plate
2. Carbon steel Yes Yes No No
pipe and tube
3. Alloy steel Yes No Yes No
plate
4. Alloy steel Yes Yes Yes Yes
pipe and tube
520.Essential variables for welder orwelding operator requalification.─A welder or
welding operator shall require requalification whenever a change is made in one of the
following essential variables,namely:-.
(i) An omission of backing- A welder or welding operator needs requalification
when the backing is removed and double‐welded groove welds are
considered welding with backing.
(ii) An addition of the backing in gas welding - A welder or welding operator shall
require requalification when the backing is introduced in gas welding process.
(iii) A change in U number of electrode - A welder shall require requalification
when the consumable group designation is changed from one U number to
other U number (refer Table 13/5 & Table 13/6 of this regulation).
(iv) A change in the base metal (M number) to be welded - A welder shall require
requalification when the base metal is changed (refer Table 2/1 in Chapter-
2and Table13/7 in this Chapter). However, a welder who is qualified in a
higher grade of steel shall be permitted to weld a lower grade of steel.
(v) A change from one welding process to any other process - A welder shall
require requalification when the welding process is changed.
(vi) A change from direct current to alternating current, and vice versa - A welder
shall require requalification when the current type is changed from ‗dc‘ to ‗ac‘
and vice versa.
(vii) A change in welding position –(a) A welder shall require requalification when
the position in which he is qualified is changed.
(b) A welder who is qualified in more difficult position shall be deemed to be
qualified for a less difficult position as given in tables13/2, 13/3 and 13/4.1032 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(viii) Change in pipe diameter from qualified range.
(ix) Change in welding progression in vertical welding.
(x) Change in deposited weld metal thickness qualified (see Table 13/8)
Table 13/2: Additional positions in which a welder is qualified (plate groove welding)
Serial No. Test position Additional qualified position
Flat H o r i z o n t a l Vertical O verhead
(Fig. 13/1) (Fig. 13/2) (Fig. 13/3) (Fig. 13/4)
(1) (2) (3) (4) (5) (6)
1. Flat (Fig. Yes No No
No
XIII/1)
2. Horizontal (Fig. Yes No No
Yes
XIII/2)
3. Vertical (Fig. Yes No
Yes No
XIII/3)
4. Overhead (Fig. Yes No
No Yes
XIII/4)
Table 13/3: Additional positions in which a welder is qualified (plate fillet welding)
Serial No. Test position Additional qualified position
Flat H o r i z o n t a l Vertical Overhead
(Fig. (Fig. 13/LFH) (Fig. (Fig. 13/LFO)
13/LFF) 13/LFV)
(1) (2) (3) (4) (5) (6)
1. Flat (Fig. 13/LFF) Yes No No No
2. Horizontal (Fig. Yes Yes No No
13/LFH)
3. Vertical (Fig. 13/LFV) Yes Yes Yes No
4. Overhead (Fig. Yes Yes
No Yes
13/LFO)
Table 13/4: Additional positions in which a welder is qualified (pipe groove welding)
Serial No. Test position Additional qualified position
Horizontal Vertical fixed Horizontal Pipe Inclined
rolled (Fig. (Fig. fixed to 45°(Fig.
13/PGR) 13/PGV) Fig. 13/PGI)
(XIII/PGH)
(1) (2) (3) (4) (5) (6)
1. Horizontal rolled Yes No No No
(Fig. 13/PGR)
2. Vertical fixed (Fig. Yes Yes No No
13/PGV)
3. Horizontal fixed Fig. Yes No Yes No
13/PGH)
4. Pipe Inclined to 45° Yes Yes Yes Yes[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1033
(Fig.13/PGI)
Table 13/5: Electrode classification Groups
Serial Group Electrode Classification
No. Designation
(1) (2) (3)
1 U1 EXX10, EXX13, EXX13-X.
2 U2 EXX15, EXX16, EXX18, EXX48, EXX15-X, EXX16-X, EXX18-X,
E410-15/16, E347-15/16, E308-15/16, E309-15/16, E310-15/16,
E316-15/16, E2209-15/16
3 U3 ERXXS-X, ERXXX (Austenitic stainless steel), ERXXXX (Duplex
Stainless Steel), EXXT-X, EXXC-X
4 U4 All Nickel and Nickel Alloy
5 U5 ECoCr-A/B/C/E,
6 U6 ERCoCr-A/B/C/E/F/G
Note: The letters ―XX‖ used in the classification designation in this table stand for the
various strength levels (60[415], 70[485], 80[550], 90[620], 100[690], 110[760], 120[830])
of electrodes, ―X‖ stands for weld metal chemical analysis.
Table 13/6: Alternate U-No. Qualified For welders and welding operator’s qualification
Serial No. Tested With Qualified Range
(1) (2) (3)
1 U1 U1 only
2 U2 U1 and U2
3 U3 U3 only
4 U4 U4 only
5 U5 U5 only
6 U6 U6 only1034 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Table 13/7: Alternate ‘M’Nos. qualified for welders and welding operator’s qualification
Serial No. Tested with ‗M‘ Number Range of Qualified ‗M‘ Numbers
(1) (2) (3)
1 M1 Gr2 M1 only
2 M5A or M5B or M15E M1 to M15E
3 M8 M1 & M8
4 M43 M43 only
Table 13/8: Qualified thickness range for Welder / Welding operator qualification
Serial No. Deposited Thickness of Range of
Weld t (mm) a Qualified thickness
(1) (2) (3)
1. t < 12 2t
2. t ≥ 12 b Unlimited
Note:
a For multi process welding ―t‖ is the deposited thickness of each processes
b The test piece has to be welded with minimum 3 layers
Table 13/9: Welder and welding operators’ qualification thickness limits and test
specimens for Hard-facing (Wear resistant) and corrosion –resistant overlays
Serial No. Thickness of test Corrosion –resistant and Hard-facing overlays
coupon (T) Base Metal Thickness Qualified
(1) (2) (3)
1 Less than 25 mm T qualified to unlimited
2 25 mm and over 25 mm to unlimited
PART-4
521. Tests for initial qualification of a welderorwelding operator.─For qualification of a
welder, the welder orwelding operator has to appear for the testsas given in regulations 522
to 526.
522.Theoretical examination.─ A welderorwelding operator shall be required to answer
questions on the following subjects, orally or otherwise-
(i) Weld preparation
(ii) Elementary knowledge of the working of welding equipment.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1035
(iii) Elementary knowledge of properties of material to be welded – cold and hot
working, thermal conductivity, fusion point, oxidation (for welders engaged in
alloy steel welding).
(iv) Elementary knowledge of electro-technical principles, - kinds of current, striking
arc voltage, welding – arc voltage (for arc welders).
(v) Kinds of welds, welding defects and their prevention, welding technique (forward
and backward), influence of electrical parameters like amperage (for electric arc
welders), preheating ofbase material and subsequent heat treatment.
(vi) Electrodesandfiller metals for different types of welds and steels and joints in
different positions.
523.Practical tests.─(1) The welderorwelding operator shall be required to undergo and
pass the testsas given in regulations 524 to 526.
(2) The material of plates, tubes, pipes and electrodes used for these tests shall conform to
the requirements of appropriate regulations as may be applicable in each case.
524.Plate Welding.─ (1)One groove welded joint of two pieces of plates with single V,
double V or double U grooves on boiler quality plates in the required positions (see Fig. 13/1
of regulation 512).
(2) One fillet welded joint over a length of 381 mm using plates of not less than 16 mm thick
in the required positions (see Fig. 13/2).
525.Pipe and tube Welding.─ (1)A butt welded joint of two pieces of pipes with the axis in a
horizontal position. (see Fig. 13/PGH) with a pipe diameter 127.5 x 12.5 mm thickness
(minimum).
(2) A butt welded joint of two pieces of boiler tubes of diameter 76.1 mm x 7.1 mm
thickness (maximum) with the axis in a vertical position and tubes of same size fixed
in adjoining positions at a pitch distance of 300 mm (see figure 13/PGV).
(3) A weld between a branch tubes of diameter 88.9 mm (minimum) to a pipe (see Fig.
13/7). The branch tube shall not be of size less than 89 mm diameter x 6 mm thick.
526.Cladding.─(1) This test is required only for welders or welding operators doing
corrosion resistant/hard facing overlay.
(2)The qualification test coupon shall be of minimum size of 150 mm × 150 mm x T
(thickness of base metal).
(3) The weld overlay cladding shall be of 38 mm wide (minimum) and 5 mm thick
(minimum two layers).
(4) The weld overlay shall consist of a minimum of three weld beads in the first layer.
(See Table 13/9 of chapter 13 for qualification limits.)
Note - Every welded test piece for the examination of welders shall be stamped with an identification
mark on either side of the weld.
527. Tests for requalification of a welder / welding operator.─ (1)The material of plates,
tubes, pipes and electrodes used for practical tests shall conform to the requirements of
appropriate regulations as may be applicable in each case.1036 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) For requalification, the welder or welding operator need not be examined in
theoretical subjects. He shall be required to qualify in the following practical tests, namely: -
(i) Plate Welding; agroove welded joint shall be made in a position originally qualified.
(ii) Pipe and Tube welding; as mentioned in regulation 525.
(iii) Cladding; as mentioned in regulation 526.
(3) When a welder is continuously engaged on production weld, test on the actual
production joints to the satisfaction of the Competent Authority may be accepted as
an alternative to the tests prescribed as above under clauses (i), (ii) and (iii) of sub-
regulation (2)
PART-5
Examination of Test Specimens for Initial Qualification Tests
528.Groove welded plate specimens.─(1) (a) The Groove welded plate specimens
after welding may be lightly pressed cold to remove any distortion due to welding.
(b)The test specimen shall be then subjected to visual examination and radiographic
examination as mentioned in sub-regulation(2) of regulation 164and thereafter test
pieces shall be marked and cut out in the order shown in Fig. 13/4.
Fig. 13/4:ORDER OF REMOVAL OF TEST SPECIMEN FROM TEST PLATE FOR INITIAL
QUALIFICATION TEST
(2) The tensile test specimens (T and T ) shall be prepared as per regulation 158
1 2
.The bend test specimens two each (FB & RB) shall be prepared and tested as per
regulations 160 and 161 . Two specimens (M & M ) shall be prepared, one for macro
1 2
and the other for micro examination as per sub-regulation(1) of regulation 164 and
the results of macro and micro examination shall be satisfactory[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1037
(3) The test shall be deemed to have been satisfactory when the requirements as
given in sub-regulation (4) are met. The tensile strength of the both the test
specimens shall meet the strength requirement for the material.
(4)The convex side of the bend test specimen after bending to 180° with a mandrel
diameter of three times the thickness of the specimen shall show no discontinuities
more than 3 mm in size in any direction. In the case of alloy steel specimen, the
angle of the bend shall be decided by the competent authority, provided that in no
case, the angle shallbe less than 120°.
529.Fillet weldedplatespecimens.─ (1) (a) The preparation of the fillet-weld test specimen
shall conform to Fig. 13/5 of chapter 13.
(b)The test specimen shall not contain any visible cracks. It shall be cut transversely to
provide a centre section (254 mm) long and two end sections each approximately (25 mm)
long.
(2) (a) The centre section shall be loaded laterally in such a way that the root of the weld is
in tension.
(b) The load shall be steadily increased until the specimen fractures or bends flat upon itself.
(3)The cut end of one of the end sections shall be polished and etched with a suitable
reagent to give a clear definition of the structure of the weld.
(4)The test shall be deemed to have been satisfactory when the requirementsas specified in
sub-regulation(5) are met.
(5) (a)The bend specimen shall not fracture during loading and if the specimen fractures,
then the fractured surface shall show no evidence of cracks or incomplete root penetration,
and the sum of the lengths of inclusions and gas pockets visible on the fractured surface
shall not exceed (51 mm).
(b) Visual examination of the cross-section of the weld shall show the following:
(i)Complete fusion at the root and freedom from cracks.
(ii)Convexity or concavity of the weld profile not more than 1.6 mm
(iii) The length of two legs of the fillet within 1.6 mm difference.1038 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
FIG. 13 / 5: FILLET WELD SOUNDNESS TEST FOR PERFORMANCE QUALIFICATION
530. Groove and Fillet Welded Pipe and Tube Specimens.─ (1)(a) The groove welded
pipe and tubes specimens shall be marked and test pieces cut out as in Fig. 13/6.
(b) The test pieces shall be prepared for face bend, root bend and etch test.
(2) (a) The pipes shall not be flattened, but tested in their curved conditions with the
reinforcement at the root not exceeding 0.8 mm.
(b) Any excess weld metal may be removed by grinding.
(3) The bend test specimens shall show no discontinuity more than 3 mm on the convex
side of the specimen.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1039
FIG. 13/6: ORDER OF REMOVAL OF TEST SPECIMEN FROM WELDED PIPE / TUBE
(4) Fillet welded branches shall be tested by visual examination and macro examination
as under:
(a) The test weld so obtained shall be visually examined for root penetration, freedom
from undercut, disposition of runs, uniformity of surface, shape of profile, smoothness
of joint, freedom from cavities and slag, dimensions of weld deposit, quality of weld
metal (overheating, surface cracks, spongy surface, etc.) Any piece showing serious
defect shall be rejected.
(b) Each branch weld test piece shall be sawn as shown in Fig. 13/7 and each portion so
produced shall be prepared and etched. The sections shall then be examined for
degree of fusion, degree of root penetration, absence of non-metallic (slag)
inclusions and quality of weld metal. The joint should show good root fusion,
complete freedom from basal cracking, and the absence of any very minor defects.1040 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Outside Dia. of Pipe Main D1 – Dia.127 x 10 mm thick or more
Outside Dia. of Branch D2 – Dia. 89mm x 6mm thick or more
FIG. 13/7: ORDER OF REMOVAL OF SPECIMEN FOR BRANCH WELDS
531.Welded Tube Joints.─ (1)A test length approximately 203 mm long shall be cut from
the tube with the welded joint disposed approximately at the centre. After visual examination,
one test piece not exceeding 13 mm, for tubes 6 mm in thickness and below and thrice the
thickness of the tube for thickness of over 6 mm shall be cut longitudinally.
(2) (a) The test piece shall not be less than 76 mm in length on either side of the weld.
(b) The slight excess of internal bead may be filed until it is not more than 0.8 mm proud of
the general surface.
(c) The test piece shall then be bent back with the root in tension through 90° round a former
of diameter equal to three times the thickness of the tubes.
(d) With regard to alloy steel pipes and tubes, the bend test specimen shall be bent without
being straightened, but after removal of the weld reinforcement down to the level of but not
below the surface, round a former of diameter 4t and through an angle of 90°.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1041
(e) The bending may be carried out by blows or by pressure. Care shall be taken to ensure
that the former is so positioned that the weld is maintained at the crown of the bend.
(f) The test specimen shall be capable of being bent through 90° without signs of failure,
although slight premature failure at the edges of a specimen need not be considered a
cause for rejection.
(g) The opening out of a slight defect due to incomplete root penetration or lack of root fusion
need not be considered a cause for rejection; provided the defect has sound metal at the
back and on either side of it.
532.Cladded Specimen.─ (1) The corrosion resistant or hard facing overlay weld surface
shall be examined by the liquid penetrant method and shall meet the acceptance standards
in sub-regulation (2) of regulation164.
(2)The corrosion resistant test coupon shall be sectioned to make four side‐bend (B1, B2,
B3, B4) test specimens perpendicular to the direction of the welding as perregulations 160
and 161. Test specimens shall be removed at locations specified in Fig. 13/8.
Plate size 150x150 X T (Base metal thickness) mm
FIG. 13 / 8: ORDER OF REMOVAL OF TEST SPECIMEN FROM CORROSION
RESISTANT OVERLAY FOR INITIAL / RE QUALIFICATION TEST
(3) (a) The hard facing overlay base metal shall be sectioned transversely to the
direction of the hard‐facing overlay.
(b)The two faces of the hard‐facing exposed by sectioning shall be polished and
etched with a suitable etchant and shall be visually examined with 5X magnification.1042 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(c) Cracks, lack of fusion, or other linear defects in the weld metal or the heat‐
affected zone shall be examined(see Fig. 13/9).
Plate size 150x150 X T (Base metal thickness)
FIG. 13/ 9: ORDER OF REMOVAL OF MACRO TEST SPECIMEN FROM HARD FACING
OVERLAY FOR INITIAL / RE QUALIFICATION TEST
533. Additional tests before rejection.─(a) Whereany test piece tested as per the
regulations 528 to 531fail to meet the specified requirements, one further strip may be cut
from the specimen and subjected to the same test and if any test piece does not reach the
required standard, two further welds shall be made and the procedure in the above
regulationsshall berepeated.
(b) If any of these welds does not reach the required standard, the welder shall be deemed
not to have qualified for a certificate.
534.Decision of the competent authority.─ The decision of the competent authority on
refusal to grant Welder Certificate shall be final.
PART-6
Examination of test specimens for requalification tests
535.Groove Welded Plate Specimens.─(1) (a) The Groove welded plate specimens
after welding may be lightly pressed cold to remove any distortion due to welding.
(b) The test specimen shall be then subjected to visual examination and radiographic
examination as mentioned insub-regulation (2) of regulation164 and thereafter, test
pieces shall be marked and cut out in the order shown in Fig. 13/10.
(2) (a) The face and root bend test specimens (FB & RB) shall be prepared and tested
as per regulations 135 and 136. Two specimens (M & M ) shall be prepared, one for
1 2
micro and the other for macro examination as per sub-regulation (1) of regulation164.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1043
(b) The test shall be deemed to have been satisfactory when the following requirements
are met.
FIG. 13 / 10: ORDER OF REMOVAL OF TEST SPECIMEN FROM TEST PLATE FOR RE
QUALIFICATION TEST
(i) The convex side of the bend test specimen after bending to 180° with a mandrel
diameter of three times the thickness of the specimen shall show no
discontinuities more than 3 mm in size in any direction and in the case of alloy
steel specimen, the angle of the bend is to be decided by the competent
authority, provided that the angle shall, in no case, be less than 120°.
(ii) The macro / micro examination reveal satisfactory microstructure of the weld
metal and Heat Affected Zone(HAZ).
536.Fillet Plate Welded Specimen.─They shall be conducted as mentioned in regulation
529.
537.Pipe and Tube Welding.─ Specimens shall be prepared and tested as mentioned
in regulation 530 or 531, as the case may be.
538.Cladded Specimen.─The cladded specimen evaluation shall be carried out as per
regulation 532.
539.Additional test before rejection .─ (1) (a) in case any of the test pieces tested in
accordance with the regulations 535 to 538fail to meet the specified requirements, one
further weld may be cut from the specimen and subjected to the same test.
(b) If any test piece does not reach the required standard, one further weld shall be
made after sufficient retraining, and the procedure in the above regulationsshall
berepeated.
(c) If the repeat weld does not reach the required standard, the welder shall be deemed
not to have qualified for a certificate.
(2) The decision of the competent authority on refusal to grant welder certificate
shall be final.1044 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
PART-7
540. Awarding of marks.─ (1) (a) Marks shall be awarded as per the Form-XXI.
(b) Candidates obtaining marks not less than 60 per cent in the oral or written examination
and not less than 75 per cent in the practical tests, shall be deemed to have qualified for a
certificate provided that the bend tests are found to be satisfactory and in case a candidate
fail in the oral or written examination but passes in the practical test, hemay be re-examined
in oral or written examination within a period of twelve weeks from the date of examination of
practical test, and if he obtains not less than 60 per cent marks in the re-examination,
heshall be deemed to have qualified for a certificate.
(2)The Form shall be attested by the Competent Authority.
541. Award of Certificate.─ (1)On successful completion of theoreticaltests mentioned in
regulation 522 and practical testsmentioned in regulations523 to 526the welder may be
awarded a certificate in Form-IIto the extent of the tests passed by him.
(2) (a) Welderorwelding operator who pass the tests for groove welds in plates shall
be considered as having qualified for making fillet welds in plates.
(b) Weldersorwelding operators who pass the tests for fillet welds, shall be qualified
to make fillet welds only.
(c) Any certificate issued for any purpose under any rules made by the State
Government in this behalf shall be deemed to have been issued for that purpose under this
Chapter and any action taken under the said rules, shall be deemed to have been taken
under this Chapter.
542. Maintenance of records.─ (1) Every manufacturer or repairer of boilers and steam-
pipes shall maintain a record of all welding personnel engaged on welding and repairing of
boilers and steam-pipes, particulars of each welder and welding operator and the work
handled by him. Such record shall be produced to the Inspecting Authority or Competent
Person on demand.
(2) In the case of welders orwelding operators who undertake welding under their
own responsibility, the record as aforesaid shall be maintained by themselves.
543. Fees for examination of Welders or Weldingoperators.─Fees for examination of
Welders or Welding operators shall be as per regulation 331.
544. Penalty.─Penalty shall be as per regulation332.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1045
CHAPTER -14
SMALL INDUSTRIAL BOILERS
PART-1
GENERAL
545. Scope.─ This Chapter shall apply to the design, construction, inspection, registration,
operation and maintenance of small industrial boilers.
546.For the purpose of this chapter, ―small industrial boiler‖ shall include;-
(a) A shell type boiler generating steam for use external to itself under pressure up to 7
kg/cm2 (g) and having a volumetric capacity exceeding 25 litres (such capacity being
measured from the feed check valve to the main steam stop valves), but not
exceeding 500 litres including the volumetric capacity of all pressure parts being
heated from the same heating source and connected to the boiler; or
(b) A coil type or a once through boiler or a water tube boiler having the conditions
specified in clause (a) above except -
(i) The limitation of pressure shall be 12 kg/cm2 (g), and
(ii) The capacity shall not be exceeding 150 litres;
Provided that in case of boilers having combined features of clauses (a) and (b), the
design pressure shall be restricted to 7 kg/cm2 (g) and the volumetric capacity of particular
pressure parts shall not exceed the limits specified in the respective clauses above subject
to an aggregate of 500 litres.
PART-2
Extent to which variation from the standard conditions laid down in the preceding
chapters is permissible
547.─Variations from standards.-The variations from the standard conditions provided in
the preceding chapters of these regulations shall be permittedfor small industrial boilersas
provided in regulations 548 to 554.
548.Materials.─(1) The materials used in the construction of small industrial boilers shall,
except as otherwise provided under this chapter, conform to the provisions made in chapter-
2 of these regulations.
(2) (a) Steel plates used in the construction of the boilers shall be of IS: 2062 fully killed
or equivalent and the plate for shell and heads shall be not less than 6 mm in
thickness and the heads as tube sheets for tubes rolled in shall be at least 8 mm in
thickness.1046 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) The steel maker certificate provided in Part A of Form V is not required for steel
plates of IS: 2062 from the steel maker provided all other certification requirements
as specified in applicable regulations are complied with.
(3) (a) Heads of parts of boilers when not exposed to direct impact of flame may be
made of cast iron or malleable iron provided they comply with other requirements of
these regulations.
(b) The allowable stress on cast iron or malleable iron shall be based on the
tensile strength of material with a factor of safety of not less than 4.5.
549.Design, construction, workmanship and method of computing the Maximum
Allowable Working Pressure-.─ (1) (a) The construction except where otherwise specified
shall be the same as those provided in the relevant provisions of the preceding chapters of
these regulations.
(b) In case of fusion welded boiler, neither stress-relieving nor radiography of welded
joints shall be required.
(2) (a) In small industrial boilers,unflanged steel tube plate may be inserted into the shell
and welded for the entire thickness as shown in Figure 14/1 of this regulation with a
fillet weld having a throat not less than 1¼ times the thickness of the shell or tube
sheet whichever is smaller.
Figure14/1
(b) The minimum thickness of flanged welded tube sheets shall be 10 mm.
(c) The temperature of the heating element of electrically heated steam boilers
shall be so controlled that it shall not exceed 650°C.
(3) (a) The tubes shall be made of steel.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1047
(b) (i) The tubes holes shall be drilled full size with shells butt straps and ends bolted
up in position or may be punched at least 13 mm smaller in diameter than full size
and then drilled, reamed or finished full size with a rotating cutter.
(ii) The sharp edges and chips shall be removed, the plates and butt straps re-
assembled metal to metal with pins fittings the holes and with tack bolts.
550.Inspection and Testing.─The small industrial boilers shall be subjected to inspection
during construction by an Inspecting Authority and the inspection of the boilers shall be
made at the stages as given in regulations 551 and 552:
551.Shell type boilers.─(1) The inspection of shell type boilers shall be made at the
following stages, namely:-
(i) material identification and inspection;
(ii) inspection of each component after completing welding and drilling;
(iii) assembly of boiler;
(iv) hydraulic test.
(2) In case of a boiler wholly or partly welded construction, the hydraulic test pressure
shall be equal to two times the design pressure of the boiler.
(3) A test coupon shall be provided by the maker for conducting root and face bend
tests.
552.Coil type boilers, once through boilers and water tube boilers.─ (1) The
inspection of coil type boilers, once through boilers and water tube boilers shall be made at
the following stages, namely:-
(i) Identification of materials.
(ii) Hydraulic test,
(2) The pressure for hydraulic test shall be two times of the design pressure of the
boiler.
553.Certificates and maker’s stamps.─ (1)The certificate and maker‘s stamp shall be in
conformity with the provisions of Chapter-1 of these regulations.
(2) Where all information cannot be visibly stamped on the boiler plate due to its small size,
maker‘s certificate accompanying the boiler shall contain the necessary details, but in all
cases, name, works number and the year of the make shall be stamped or exhibited on
the boiler.
PART-3
554. Valves, gauges, fittings and feed supply.─ (1) (a) (i) Every boiler shall be fitted with
at least three brass wash plugs of not less than 25 mm diameter which shall be screwed into
the openings in the shells near the bottom.1048 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ii) In the boilers of closed system type heated by removable internal electric heating
elements, the opening for these elements when suitable for cleaning purposes may be
substituted for wash out openings.
(b) (i) Boilers not exceeding 300 mm internal diameter may have two 25 mm openings
for cleaning, one of which may be used for the attachment of the blow off valve.
(ii) Wherever possible,the openings shall be opposite to each other.
(iii) All threaded openings in the boiler shall be provided with welded reinforcement, if
necessary, to give four full threads therein.
(c) (i) Electric boilers of a design employing removable top cover flange for inspection
and cleaning need not be fitted with washout openings and washout plug.
(ii) Level gauges are not required for once through boilers.
(2) Every boiler shall be provided with at least one feed pump or other feeding device
except where it is connected with a water main carrying pressure to feed that boiler
or where the steam generator is operated with no extraction of steam (closed
system). In the latter case, in lieu of the feeding device, a suitable connection or
opening shall be provided to feed the boilers. Such connection shall be not less than
13 mm in diameter.
(3) (a) Every boiler shall be fitted with necessary mounting and fittings as provided in
Chapter-5 of these regulations, and they shall be of substantial construction suitable
for 7 kg/cm2(g).
(b) All these fitting, except safety valves shall be certified by manufacturers of the
fittings themselves.
(4) (a) The feed pipe shall be provided with a check valve and a stop valve of a size not
less than that of the pipe.
(b) The feed water may be delivered to the boiler through the openings of the same
size in the shell as that of the blow off connection.
(5) (a) Each boiler shall be equipped with a blow off connection, not less than 18 mm in
size located to drain the boiler water from the lowest water space practicable when
the boiler is under pressure.
(b) Feed water shall not be introduced through the openings or connection needed
for the water column, the water gauge glass or the gauge cock.
(6) (a) Every boiler other than a coil type or a once through boiler shall be fitted with two
gauge glasses not less than 150 mm long for determining the water level.
(b) The boiler shall have the lowest visible part of the water gauge located at least 25
mm above the lowest permissible water level.
(7) (a) The lowest permissible water level of vertical boilers shall be at a point one-third
of the height at the shell above the bottom head or tube sheet.
(b) Where the boiler is equipped with internal furnace, the water level shall not be
less than one-third of the length of the tubes above the top of the furnace tube sheet.
(8) (a) The steam pressure gauge shall have its dial graduated to not less than twice
the maximum allowable working pressure of the boiler.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1049
(b) The diameter of the dial shall be at least 100 mm and the pipe connecting the
pressure gauge shall be minimum 10 mm and the connection shall be through
siphon.
(9) (a) Each boiler shall be equipped with two safety valves for relieving the steam
pressure. The diameter of the valves shall not be less than 13 mm.
(b) The minimum relieving capacity of the safety valve shall be sufficient to
discharge all the steam that can be generated by the boiler without allowing the
pressure to rise more than 10 percent above maximum allowable working pressure.
(c) The safety valve shall be connected to the boiler independently of any other
steam connections, without any unnecessary intervening pipe or fitting. Such
intervening pipe or fitting if unavoidable shall not be longer than the corresponding
face to face dimension of a tee fitting of the same diameter and the minimum
opening there through shall be at least equal to the valve inlet.
(10) No valve of any description shall be placed between safety valve and the boiler not
on the discharge pipe from the safety valve to the atmosphere.
(11) The electrically heated boilers shall be effectively earthed with a lead of substantial
cross section.
555. Registration, operation andmaintenance.─(1)(a) The fee required for registration
under sub-section (2) of section 12 of the Act shall be as per table 8/2 of regulation 304.
(b) The annual inspection fee for renewal of certificateshall be as per table 8/3 of
regulation 305.
(2) The certificate of manufacture and test for small industrial boilers shall be issued in
Form-XXII.
(3) Operator for these boilers shall possess minimum educational qualification of
matriculationor equivalent1050 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER-15
FEED WATER FOR BOILER
556. Scope.─This chapter lays down specifications for feed water and boiler water for.─
(a) Low and medium pressure boilers (boilers operation up to 60 kg/cm2 (g).
(b) For boilers operating at pressures higher than 60 kg/cm2 (g), better quality of water to
IS: 10496 shall be adopted.
557. Requirements.─ The water shall comply with the requirements given in Table 15/1of
this chapter when tested by the methods provided in Columns 6 and 7 of the table.
558. Sampling.─Sampling shall be done by following general directions mentioned in Part-2
of IS: 3025 issued by Bureau of Indian Standards and in particular, the following points shall
be observed, namely:-
(a) A stainless steel or monel metal coil shall be fitted on the sampling cock so that the
temperature of the water sample shall be well below the boiling point at atmospheric
pressure and there is no risk of aeration and concentration due to flashing into
steam; and
(b) Samples of feed water shall be collected from the delivery of the boiler feed pump,
samples of boiler water from the top drum, and samples of condensate from the
delivery of the condensate extraction pump.
559. Test methods.─ Tests shall be carried out as provided in the appropriate clauses of IS:
3025 and IS: 3550 and indicated against the characteristics in Table 15/1of this chapter.
Table 15/1: Chemical requirements of Feed water and Boiler water for Low and
Medium Pressure Boilers
(regulations 557 and 559)
Requirement for Boiler Pressure Method of Test
Serial Characteristic (Ref. to Cl. No. of)
Number
Up to 20 21 to 39 40 to 60 IS: 3550+ IS: 3025 *
kg/cm2(g) kg/cm2(g) kg/cm2(g)
(1) (2) (3) (4) (5) (6) (7)
(i) Feed Water
(a) Total hardness (as CaCO ), 5 2 Nil - 16.1
2
mg/l, max
(b) pH value 8.8 to 9.5 8.8 to 9.5 8.8 to 9.5 - 8
(c) Dissolved Oxygen, mg/l, max - 0.5 0.5 16 -
(d) Silica (as SiO ), mg/l, max - 0.5 0.5 16 -
2
(ii) Boiler Water
(a) Total alkalinity φ (as CaCO ), 700 500 300 - 13
3
mg/l max[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1051
(b) Caustic alkalinity (as CaCO ), 350 200 60 - 15
3
mg/l max
(c) pH value 9.0 to 9.0 to 9.0 to - 8
12.0 12.0 11.0
(d) β Residual sodium sulphite (as - 30 to 50 20 to 30 - 21
Na SO ) mg/l
2 3
(e) Residual hydrazine (as N H ), 0.1 to 1 0.1 to 0.5 0.05 to 26 -
2 4
mg/l 0.3
(if added) (if added)
(f) Phosphates (as PO ). mg/l (if 20 to 40 15 to 30 5 to 20 14 -
4
added)
(g) Total dissolved solids mg/l, max 3500α 2500 1500 9 12
(h) Silica (as SiO ), mg/l, max - 15 15 16 30
2
Notes:
1. Recovery Boilers: The boiler feed water used shall be completely de-mineralized and also the boiler
feed water and boiler water shall be conditioned in accordance with high pressure boilers working at 60
kg/cm2(g)and above (see IS: 4343).
2. When feed water heaters are of copper or copper alloy constructions, the pH of the feed water shall be
maintained between 8.5 and 9.2 while when feed water heaters are of iron constructions, the pH of feed
may be maintained between 8.5 and 9.5.
3. Silica in Boiler Water: Lower concentration of silica may be advisable for steam of turbines, which
generally requires less than 0.02 mg/l silica in steam.
* Methods of test for routine control for water used in industry.
+ Methods of sampling and test (physical and chemical) for water used in industry.
φ Total alkalinity should preferably be about 20 percent of total dissolved solids.
β Shall not apply if reducing agents other than sodium sulphite are used.
α For shell type boilers depending on parameters, the limits can be relaxed.
CHAPTER -16
HEAT EXCHANGERS AND PRESSURE VESSELS
PART-1
560. Application.─(1) This chaptershall apply to steam accumulators, steam coil air
preheaters, high pressure(HP) heaters, deaerators and blow down tanks operating
above 3.5 kg/cm2(g).
(2)Any steam consuming equipment where steam is condensed or open to atmosphere
shall not be covered under this chapter.
561. Construction and workmanship.─The construction and workmanship shall
conform to the requirements of relevant regulations for the particular type of
construction.
562. Materials.─Materials used in the construction of these vessels shall comply with
the applicableregulations of Chapter-2.
563. Welding consumables.─Welding consumables shall comply with the relevant
provisions of Chapter-2.1052 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
564. Tubes and pipes.─The tubes and pipes shall comply with the relevant provisions
of Chapter-2.
565. Heat treatment.─All fusion welded vessels shall be heat treated for stress reliefas
perregulation 123.
PART-2
Determination of working pressure of vessels of welded construction
566.Shells.─The working pressure shall be calculated as per Equation (4/1)
mentioned under regulation 169 of chapter 4.
567.Dished end plates.─ The maximum working pressure of dished end plates
subject to pressure on the concave sideshall be determined as per Equation(4/10) of
regulation 177 of chapter 4.
568.Flat end plates.─ The maximum working pressure of flat end plates shall be
determined as per appropriate regulations in Chapter -3
569.Girth flange.─(1) Non-standard bolted flange connections when used shall satisfy
the requirements of these regulations .
(2) The design and construction of a flange shall involve the selection of the gasket
(material, type, and dimensions), flange facing, bolting, hub proportions, flange width,
and flange thickness.
(3) Flange dimensions shall be such that the calculated stresses in the flange,does not
exceed the allowable flange stresses.
570.Standard flanges.─Standard flanges used in heat exchanger shall conform to the
Codes or Standards like British Standards (BS), European Standards (EN), American
Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code and
Tubular Exchanger Manufacturers Association (TEMA), commonly used in industrially
advanced countries.
571.Bolts and Studs .─(1) Bolts and studs connecting the parts of the vessel such as
shell, end plates , tube plates shall be made of steel.
(2)The maximum working pressure for the bolts and studs shall be as per by the
following Equation,─
N x C 1.28 2
P = -------- D - ----- Equation (16/1)
A n
Where,
P Maximum allowable working pressure in tons/sq.in,
D is the diameter of bolt or stud over threads in inches,[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1053
N is the number of bolts or studs securing the part,
n is the number of threads of screws per inch,
C 4,700 for steel bolts or studs of 28 tons/sq. in. minimum ultimate tensile
stress where the diameter over thread is less than 19 mm,
C 5,100 for steel bolts or studs of 30 tons/sq. in. minimum ultimate tensile
stress where the diameter over thread is less than 19 mm,
C 5,600 for steel bolts or studs of 35 tons/sq. in. minimum ultimate tensile
stress where the diameter over thread is not less than 19 mm,
C 5,600 for steel bolts or studs of 28 tons/sq. in. minimum ultimate tensile
stress where the diameter over thread is not less than 19 mm and not
greater than 22 mm,
C 7,000 for steel bolts or studs of 28 tons/sq. in. minimum ultimate tensile
stress where the diameter over thread is greater than 22 mm.
‗A‘ is the area in square inches of the surface supported by the bolts or studs. For
jointed flanges the area shall be taken to extend to mid-way between the pitch lines
of the bolts and the inner edge of the flange by which the part is secured.
PART-3
572. Tubes.─Where the tubes are subjected simultaneously to both internal and
external pressure, the thickness of the tubes shall be the higher of that determined
independently by the equations12/12 and12/13 of regulation 471 of chapter 12.
573. Dished end plates.─The shape of dished end plates shall be in conformity with
the requirements of regulation174.
574. End plate attachments.─ These shall comply with any one of the figures
provided in chapter-10 or chapter-12.
575. Tube plates.─The minimum thickness of tube plates shall comply with the
requirements of regulation 472.
576. Stand pipes, nozzles, pads and seating for mounting and their
attachments.─ Stand pipes, nozzles, pads and seatingfor mounting and their
attachments shall comply the provisions of relevant regulations.
577.U-Tubes.─(1) U-tubes used in heat exchangers shall not have ovality more than
10% after forming.
(2)Carbon and alloy steel U-Tubes up to mean radius R = 5D (where D = Tube
outside diameter) shall be stress relieved with minimum soaking time of 15 minutes.1054 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
578.Tube bundle assemblies. ─ Tube bundle assemblies shall be checked for
free entry by using a ring gauge having inside diameter of baffle equal to Outside
Diameter(OD) of tube + 1.5 mm.
579.Initial qualification of tube to tube sheet joints.─(1)The method of joining tubes
to tube sheet shall be any one of the following,namely:-
(i)Strength expansion only (without welding);
(ii) Strength welding & light expansion, or
(iii) Strength expansion & seal welding.
(2)All the above three process shall be carried out with procedure qualified by the
manufacturer.
(3) (a) The boilerorboiler component manufacturer shall prepare written procedures for
joints that are expanded (whether welded and expanded or expanded only) for joint
strength.
(b) The boileror boiler component manufacturer shall establish the variables that affect
joint repeatability in these procedures.
(c) The procedures shall provide detailed descriptions or sketches of enhancements,
such as grooves, serrations, threads, and coarse machining profiles.
(4) (a) For strength welded joints, minimum eight mock up welds are required to
qualify each procedure.
(b) The mock up assembly shall essentially duplicate the tube hole configuration and
tube-to-tubesheet joint design.
(5) The materials group (M No. wise), tube hole size, tube size and tube fit up
with tube sheet shall simulate production.
(6) Test block arrangementshall be as given under,─
Minimum number of holes = 3-2-3 for triangular pitch.
= 3-3-3 for Square pitch
Thickness = Tube sheet thickness or 50 mm whichever is less.
(7) (a) The test block simulating the tubesheet may be circular, square or
rectangular in shape, essentially in general conformity with the tube pitch geometry.
(b) The test assembly shall consist of an array of tubes such that the tube to be tested
is in the geometric center of the array and surrounded by at least one row of adjacent
tubes. (c) The test block shall extend a distance of at least one tubesheet ligament
beyond the edge of the peripheral tubes in the assembly.
(8) All tubes in the test block array shall be from the same grade of material and
shall be installed using identical procedures.
(9) (a) The length of the tube used for testing the tube joint need only be
sufficient to suit the test apparatus.
(b) The length of the tubes adjacent to the tube joint to be tested shall not be less
than the thickness of the test block to be qualified.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1055
580. Procedure for testing the test block.─(1) The mock-up welds shall be subjected
to the tests given in regulations 581 to 583sequentially and shall meet the applicable
acceptance criteria.
581. Acceptance criteria for visual examination.─ (1) The accessible surfaces of the
welds shall be examined visually with no magnification required.
(2) The welds shall show complete fusion and no evidence of burning through the tube
wall, and shall be free from cracking or porosity.
582. Acceptance criteria withliquid penetrant.─Procedure and performance tests
examined by liquid penetrant techniques shall be judged unacceptable when the
examination exhibits any indication in excess of the limitsspecified as the following;-
(i) relevant linear indications;
(ii) relevant rounded indications greater than 5 mm;
(iii) four or more relevant rounded indications in a line separated by 1.5 mm or
less (edge‐to‐edge).
583. Acceptance criteria for macro-examination.─ (1) The mock up welds shall be
sectioned through the center of the tube for macro‐examination.
(2) The four exposed surfaces shall be smoothed and etched with a suitable etchant to
give a clear definition of the weld and heat‐affected zone.
(3) Using a magnification of 10X to 20X, the exposed cross sections of the weld shall
conformto as under;-
(i)minimum leak path dimension required by the design;
(ii) no cracking;
(iii) complete fusion of the weld deposit into the tubesheet and tube wall face;
(iv) complete penetration of the weld deposit to within 0.4 mm of the root of the
joint; and
(v) porosity shall not reduce the weld throat below the required minimum leak
path thickness.
584. Tube thinning calculations.─ (1) Tube thinning calculations shallbe using the
equation given below, based on the measured values.
(2) The thinning shall be within 5% to 8%.
(T-t) - (D - d)
% Thinning = ----------------- x 100 Equation (16/2)
2 x Tube thickness
Where,
T = Internal diameter of the tube after expansion
t = Internal diameter of the tube before expansion
D = Tube sheet Hole Diameter
d = Tube outer diameter.1056 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER- 17
SMALL SOLAR BOILERS
585.Scope.─This chapter shall apply to the design, construction, inspection, registration,
operation and maintenance of small solar boilers.
PART-1
Definitions
586. Solar receivers.─Solar receivers are the devices that receive solar radiation heat from
the sun to generate steam.
587. Small solar boiler .─ (1) A small solar boiler shall be a solar steam generating system
producing steam for use external to itself having area concentration ratio of solar radiation
capturing aperture area to receiver area less than 300 and having a volumetric capacity
more than 25 litres.
(2) A natural or forced circulation type boiler wherein the receiver is the solar heat receiving
device generating steam at pressure up to 12 kg/cm2(g)
588. Heating surface area.─The heating surface area of a small solar boiler shall be the
area of receivers exposed to the receiving radiation.
589. Volumetric capacity.─Volumetric capacity of a small solar boiler shall be the total
volume from feed check valve to the main steam stop valve at the outlet of steam header.
PART-2
Extent to which Variation from the standard conditions laid down in the preceding
chapters is permissible
590.Variations from standards.─The variations from the standard conditions provided
in the preceding chapters of these regulations shall be permittedfor small solar boilersas
provided in regulations 591 to 594.
591. Materials.─ (1) The materials used in the construction of small solar boilers shall
conform to the provisions made in these regulations.
(2) (a) Plates used in the construction of the boilers shall be either of IS: 2062 or
equivalent or as per Chapter-2.
(b) The plate for shell and heads shall be not less than 6 mm in thickness and the heads
as tube sheets for tubes rolled in shall be at least 8 mm in thickness.
(3)The tubes and pipes shall be made of carbon steel, alloy steel, stainless steel or
copper.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1057
(4) Corrosion allowance of 0.75 mm shall be provided for parts of the boiler directly exposed
to atmosphere and solar radiation.
(5) No corrosion allowance is required for stainless steel parts of the boiler.
(6) Materials need not be certified with Indian Boiler Regulations forms from the maker
provided all other certification requirements as mentioned in applicable regulations are
complied with.
592. Design, construction, workmanship and the method of computing the maximum
allowable working pressure.─ (1) The construction except where otherwise specified
shall be the same as those provided in the relevant provisions of the preceding chapters
of these regulations.
(2) In the case of Fusion welded small solar boilers, radiography or stress relieving of
the weld joints shall notbemandatory.
593. Inspection and testing.─ (1) The small solar boilers shall be subjected to
inspection during construction and after completion of construction by an Inspecting
Authority.
(2) The inspection of small solar boilers shallbe made at the following stages, namely:-
(i) Material identification and inspection.
(ii) Hydraulictest; every completed boiler wholly or partly welded construction, the
hydraulic test pressure shall be equal to two times the design pressure of
theboiler.
594. Certificates and maker’s stamps.─ (1) The certificate and maker's stamp shall be in
conformity with the provisions of Chapter-1of theseregulations.
(2) Where all information cannot be visibly stamped on the boiler plate due to its small
size, maker's certificate accompanying the boiler shall contain the necessary details, but
in all cases name, works number and the year of make shall be stamped or exhibited on
theboiler.
PART-3
595. Valves, gauges, fittings and feed supply.─ (1) Small solar boiler shall be fitted with
the following, namely:–
(i) wash plugs for cleaning;
(ii) suitable provision to indicate the water level;
(iii) one water feeding device;
(iv)one feed pipe shall be provided with a check valve and a stop valve of a size
not less than that of the pipe;1058 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(v) suitable provision to drain the boiler water;
(vi) one steam pressure gauge having minimum 100 mm dial size; and
(vii) one safety valve for relieving the steam pressure.
(2) Safety valves shall be certified under Indian Boiler Regulations and all other fittings
may be certified by the manufacturers of such fittings.
596. Registration, operation and maintenance.─(1)The fees required to accompany an
application under sub-section (2) of Section 12 of theAct shall be such as provided in
regulation 304.
(2) The inspection fee for renewal of certificate after every four years shall be as
provided in regulation 305.
(3) The certificate of manufacture and test for small solar boilers shall be issued in
Form-XXIII.
(4) Operator for these boilers shall possess minimum educational qualification of
matriculationor equivalent.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1059
Form I(A):R01 Dated: xx.xx.2026
FORM-I
(PART-A)
[Regulation 4 ]
INSPECTING AUTHORITIES CERTIFICATE OF INSPECTION DURING CONSTRUCTION IN
RESPECT OF A BOILER MADE TO FOREIGN CODE FOR EXPORT
W h r y r y h h ……………………… yp l r l g h ……………… m r
……………… g pr ur l r……………… u l y M r ……………………………… u r h p N
………………… w ru u r ur up rv inspected at various stages at construction
by the Competent Person and that the design, construction and workmanship were satisfactory and
v ry r p r w h ………………… p Th l r mp u r:
The boiler on compl w ……………… h pr h mp r
……………… r ly w h h l p r ur h
with this certificate.
We have satisfied ourselves that the design, construction and dimensions of the boiler are as
h w h M k r’ r w g N ………………… ppr v g y u , h h p r ul r
r h M k r’ r m u ur r rr h ur k wl g
belief.
M k r’ r , g by them and countersigned by us, as required by the
…………………… / p , l
Name and Signature of Inspecting Authority1060 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form I(B):R01 Dated: XX.XX.2026
FORM-I
(PART-B)
[See regulation 8(a)]
CERTIFICATE OF INSPECTION FOR SHOP ASSEMBLED BOILERS
INSPECTING AUTHORITY: ____________________________________ Certificate No._____________
We hereby certify that the ________Boiler, built by M/s________________________
_______________________________________________________________________ under
M k r’ um r ____________ w ru u r ur up rv p v r u
stages of construction by the Competent Person and that the construction and workmanship were
satisfactory and in accordance with the standard conditions for the design and construction of
boilers as per regulations framed under the Boilers Act, 2025.
The boiler is stamped on the ____________________________ Shell Plate with stamp as shown
hereunder: -
M R’ N M : _____________________________________
M R’ NO : __________ YEAR OF MAKE : _________
TESTED TO : _______ kg./cm² (g)ON : _______________
Design Pressure of boiler : _______ kg./cm² (g)
OM T NT R ON’ OR IN TING UTHORITY’ OFFI I T M
The boiler on completion was subjected to a Hydrostatic test pressure of _____
kg/cm² (g) in the presence of the Competent Person on _____ day of ______________ and
satisfactorily withstood the test.
All welded seams were subjected to destructive and Non-Destructive examination wherever
applicable and found satisfactory.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1061
We have satisfied ourselves that the construction and dimensions of the boiler are as shown
h M k r’ r w g Num r _____________________________________ g y u h
h p r ul r r M k r’ r m u ur F rm-IV(Part-A) countersigned by us
are correct to the best of our knowledge and belief.
Name and Signature of Competent Person Name and Signature of Inspecting
Authority
Date and Seal1062 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form I(C):R01 Dated: XX.XX.2026
FORM-I
(PART-C)
[See regulation 8(a)]
CERTIFICATE OF INSPECTION FOR SITE ASSEMBLED BOILERS AT MAKER’S WORKS
INSPECTING AUTHORITY: ____________________ Certificate No. ____________
We hereby certify that the__________ boiler; built by
M/s____________________________________
u r M k r’ Num r _____________________w ru u r ur up rv
inspected at various stages of construction by the Competent Person and that the construction and
workmanship were satisfactory and in accordance with the Standard Conditions for the design and
construction of boilers as per regulations framed under the Boilers Act,2025.
The Boiler components are stamped as per details below, wherever applicable.
Component Name Drawing No. Stamping Details
M k r’ N m : ______________ M k r’ Num r: _____________Y r m k :
________
Tested to : _______________ kg/cm² (g) on ___________
Design Pressure of boiler : _______________ kg/ cm² (g)
mp r ’ r I p g u h r y’ O l mp
Samples of materials used in the constructions of the boiler were tested in the presence of
the Competent Person and found to comply with the regulations.
All welded seams were subjected to destructive and Non-Destructive examination wherever
applicable and found satisfactory.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1063
We have satisfied ourselves that the construction and dimensions of the boiler are as shown
h M k r’ r w g Num r___________________ signed by us, and that the particulars
r h M k r’ r m u ur F rm-IV(Part-A) countersigned by us are correct
to the best of our knowledge and belief.
Name and Signature of Competent Person Name and Signature of Inspecting
Authority
Date and Seal1064 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form I(D):R01 Dated: XX.XX.2026
FORM-I
(PART-D)
[See regulation 8(a)(iv)]
INSPECTING AUTHORITY CERTIFICATE OF INSPECTION DURING CONSTRUCTION OF
BOILERS FOR WHICH VARIATIONS FROM STANDARD CONDITIONS HAVE BEEN PERMITTED
W h r y r y h h ……………… yp l r l g h ……………… m r ………………
g pr ur l r……………… u l y M r ……………… ……………… u r h p Num r
……………… w ru u r ur up rv p v r u g ru y
the Competent Person, and that the design, construction and workmanship were satisfactory and in
accordance with the variations from the standard conditions laid down in the Indian Boiler
Regulations, 2026, for material design and construction features have been permitted by the Board
of Inspecting Authority under the Boilers Act, 2025.
The Boiler is stamped on the front end plate with our stamp as shown hereunder:—
M k r’ N m …………… Y r M k …………… W rk Num r …………… T ……………
……………… g pr ur l r mp r ’ r I p g u h r y’s official stamp.
The boiler on completion was
The drum and header were u j w r pr ur …………… h pr
mp r ……………… ……………… r ly w h h
*Samples of materials used in the construction of the boiler were tested in the presence of the
Competent Person and found to comply with the requirements. All welded seams were subjected to physical
tests and radiographic examination wherever applicable and found satisfactory.
Note: Strike off this paragraph where no such testshave been carried out and the certificate in Form-V(Part-A) by a
Well-Known steel Maker is intended to be furnished.
* Strike out which is not applicable.
We have satisfied ourselves that the constructions and dimensions of the boiler are as
shown in the Maker’ r w g N ……………… g y u h h p r ul r r h
M k r’ r m u ur F rm-IV(Part-A) countersigned by us, are correct to the best of
our knowledge and belief. Particulars of variations from the standard conditions laid down in the
said regulations as permitted by the Board or Inspecting Authority are enclosed.
Name and Signature of Inspecting Authority
………… h ………… y ………… ………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1065
Form I(E):R01 Dated: XX.XX.2026
FORM-I
(PART-E)
[See regulation 8(a)(v)]
INSPECTING AUTHORITIES CERTIFICATE OF INSPECTION AFTER COMPLETION OF BOILER
ERECTION AT ASSEMBLY SITE
We hereby certify that the...............type boilers Design pressure of
boiler.............................kg/cm2(g) built by Messrs................................. at........................... under
makers number .............................. was erected under our supervision and inspected at various
stages of erection by the Competent Person and that the erection and workmanship were
satisfactory and in accordance with the Standard Conditions for construction of land boilers under
the Boilers Act, 2025.
All welded seams were subjected to post weld Heat treatment and Non-destructive
examination wherever applicable and found satisfactory.
The boiler on completion of erection was subjected to a water pressure tests of
...........................kg /cm2(g) in the presence of the Competent Person on............................and
satisfactorily withstood the test.
W h v ur lv h h r h l r r h w h M k r’
Drawing No...............................are correct to the best of our knowledge and belief.
Name & Signature of Competent Person Name and Signature of Inspecting authority
Dated at ............this............. Day of ..............20.........1066 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form II:R01 Dated: xx.xx.2026
FORM-II
[See regulation 7(1)(b)(iii) and 541]
QUALIFIED BOILER WELDER’S CERTIFICATE NO:
ISSUED UNDER
THE INDIAN BOILER REGULATIONS, 2026
Recent Passport Size
Photo
Name of Welder :
(Hard / Soft Copy
F h r’ N m :
To be attested by
Date of Birth : Competent
Authority
Identification marks :
Signature of the Welder :
Address of Welder :
(Organisation Address)
EMPLOYMENT PARTICULARS
From To Name of Employer Work on which engaged
This is to certify that Mr. / Ms. __________________________ (Welder Name) son/daughter of
Mr._________________________ has been examined and tested in the prescribed manner in the
presence of ___________________________________________ (Representative of Competent
Authority) and is deemed to have satisfactorily proved his ability to make sound welds as per[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1067
particulars given in page number two and is hereby authorised to undertake such welds. He/She is
authorised to undertake welding under these regulation.
The certificate validity is till the date of expiry indicated or the date of expiry of the revalidation
whichever is later.
Granted this ____________ (date) under the seal and authority of the
_____________________________________ (name of the office of the competent authority).
Date Seal (Name and Signature of Competent Authority)
QUALIFICATION DETAILS
Particulars Observation
Date of Test
Type & Position of Test
Material Type Carbon Steel / Alloy Steel / Nickel & Nickel Alloys
Material Grouping (M & Gr. Number)
Process of Welding
Weld with Backing Yes / No
Electrode Grouping (U Number)/ Filler Wire
Name/Specification
Test Piece X-rayed Yes / No
PERIOD OF VALIDITY
From To Basis of Renewal COMPETENT AUTHORITY
(Based on continuous Signature & Seal
engagement / fresh
tests)1068 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form III:R00 Dated: xx.xx.2026
FORM-III
[See Regulation7(1)(b)(v)]
QUESTIONNAIRE FORM FOR MANUFACTURER OF BOILERS/BOILER COMPONENTS UNDER THE
INDIAN BOILER REGULATIONS, 2026
1. Registered name of the firm and its permanent address:
2. Year of establishment:
3. Works address(s):
4. Classification applied for—
(a) Special Class
(b) Class I
(c) Class II
(d) Class III
(e) Class IV
(f) Components manufacturer
Notes: 1. A higher class boiler manufacturer shall be eligible to manufacture lower
class boilers.
2. A boiler manufacturer shall also be eligible to manufacture boiler components
as boiler component manufacturer
2. Covered area available for manufacture:
3. Details of design facilities available and its location:
4. Details of manufacturing facilities available within the works:
5. Details of testing facilities available within the works:
6. Details of R & D facilities , if any:
7. Number of qualified NDT Personnel:
8. Number of qualified welders:[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1069
9. Details of Technical Manpower:
10. Details of internal quality control systems:
11. Any other relevant information:
Date ………………… Signature of the authorised signatory
of the firm with stamp
l ………………
Note 1: The recognition of the firm as a manufacturer shall be for a period of three years,
thereafter they shall apply for renewal of their recognition at least three months before
the expiry of the said period.
Note 2: Information may be submitted on additional sheets, wherever required.1070 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form IV(A):R01 Dated: xx.xx.2026
FORM-IV
(PART-A)
[See regulation 8(b)]
CONSTRUCTOR’S CERTIFICATE OF MANUFACTURE AND TEST
1. Description ru r’ N m r …………………………………………………
M u ur r/ k purp ………………………………………………
r N ………………………………………………………………………
Typ l r …………………………………………………… g h overall
m r rg l ………………………………………………………
g pr ur l r ……………………………………………………… g/ m² g
Reheater Pressure -------------------------------------- ---------------------Kg/ cm²(g)
M k r Num r l r …………………………………………………
Y r M k ………………………………………………………………
T l h g ur ……………………………………………………… q m
v p r p y ……………………………………………………………… r l ul
relieving capacity of safety valves)
Final Temperature of steam (Design) superheater outlet…………°
r h r Ou l ………… °
r r p l r …………………………………………………………
2. Parts manufactured N m mp ………………………………………………
at the constructor’s
r w g N ……………………………………………
works
M u ur y ……………………………………………………………………
I m rk ………………………………………………………………
r m u ur , p ll g ru y ………………………
(Inspecting Authority).
r hy r ul lly p r y ……………
3. Parts manufactured N m mp ………………………………………………………
outside the
r w g N …………………………
constructor’s works
M u ur y ……………………………………………………………………
I m rk ………………………………………………………………
r m u ur , p ll g ru y ………………………
(Inspecting Authority).
r hy r ul lly p r y ……………
Note: m l r rm ur h r h p r m u ur u h ru r’ W rk
4. Construction[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1071
The construction is in accordance with Chapter 3/ 4 / 10 / 12 / 14/16/17 of the Indian Boiler Regulations.
Num r l g u l m h ll/ rum h l …………………………………
Num r l g u l m ur h r g ………………………………………
Number of circumferential seams in h ll/ rum ……………………………………………
lu g m …………………………………………………………………………
Num r r um r l m h ur ……………………………………………
l r p r , y rr u w l m ur g ru ……………………
Details of heat r m ………………………………………………………………………
All welded seams were subjected to Radiographic examination to the satisfaction of the Inspecting
Authority, where required.
Note : Strike out whichever is not applicable
5. Details of Drums/Shells
Shell plate Tube plate Head e
.o N lc n
ee
mr
u ot Na
.a
id la n im o N h t g n e L
.m
m n i s s e n k c ih
T
s u id a r e d is n I .m m
m
m n i s s e n k c ih
T
m
m s u id a r e d is
n I
m
m n i s s e n k c ih
T
* e p y T h s id f o s u id a R m m .n i
z
iS
&
.o N s e lo h n a M
t
s
e
t c it a t s o r d y H2 m c /) gg k(
1 2 3 4 5 6 7 8 9 10 11 12 13
*Indicate (1) Flat (2) Dished (3) Ellipsoidal (4) Hemispherical.
6. Headers and Boxes
Description Size and shape Thickness in Head or end Hydrostatic
mm test
Shape Thickness in
kg/ cm²(g)
mm
7. Mountings
No. Nomenclature Material Type No. Size
1. Main stop valve1072 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
2. Auxiliary stop valves
3. Safety valves (a)
(b)
(c)
4. Blow down valves
5. Feed Check valves
8. Details of the safety valves and test results {Regulation 8(d)(vii)}
Manufactur r …………………………………………………………………………………………………
I m rk v lv ………………………………………………………………………………
M k r’ N …………………………………………………………………………………………………
Typ ……………………………………………………………………………………………………………
mm ………………………… r w g N ………………………………………………………
Valves details:
M r l ……………………………………………………………………………………………………
V lv …………………………………………………………………………………………………
Fl / v l …………………………………………………………………………………………………
m r v lv g ………………………………………………………………………………
Valve Body:
Mat r l ……………………………………………………………………………………………………
Op g k …………………………………………………………………………………………
Op g u l …………………………………………………………………………………………
Springs:
M r l ……………………………………………………………………………………………………
r m u ur …………………………………………………………………………………
h m l mp ……………………………………………………………………………………
Dimensions:
Ou m r l …………………………………………………………………………………
w r ……………………………………………………………………………………………
Num r l ……………………………………………………………………………………………
Fr l g h l ………………………………………………………………………………………
Test results:
l ………………… ………………………………………………………………………
l g w pr ur ……………………………………………………………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1073
Remarks:
h v lv h r? …………………………………………………………………………………
Does h v lv l k? ………………………………………………………………………………
l w pr ur ……………………………………………………………………………………… …
Typ v lv r r ul ………………………………………………………………
Typ v lv ………………………………………………………………………………………………
l …………………………………………………………… ……………………………
‘ ’ y r ul ………………………………………………………………………………
p y h v lv r h l w pr ur ……………………………………………
Signature of Maker’s representative INSPECTING AUTHORITY witnessing tests
9. Certified that the particulars entered herein are correct and that parts in sections 2 to 8, against the names
of which entries are made have been used in the construction of the boiler.
The particulars shown against the various parts used are in accordance with the enclosed certificates from the
respective Makers.
Th g h l r h h w r w g N ………
The boiler has been designed and constructed to comply with the regulations under the Boilers Act,
2 , r g pr ur ……………… kg/ cm²(g) at our Works above-named and satisfactorily withstood a
w r ……………… kg/ cm²(g) h …………… y …………… ……… h pr ur r p l
representative whose signature is appended hereunder.
M k r’ R pr v Maker
(Name, signature and stamp) (Name, signature and stamp)
Name, signature and stamp of Name, signature and stamp of
Competent Person Inspecting Authority
…………… h y …………… ………1074 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form IV(B):R01 Dated: xx.xx.2026
FORM-IV
(PART-B)
[See regulation 10 ]
CERTIFICATE OF MANUFACTURE AND TEST FOR PIPES
Certificate No. --------------- Date: -------
Name of part &
Qu y………………………………………………………………………………………………………………………
Drawing
N ……………………………………………………………………………………………………………………………………………
M k r’ m
r ………………………………………………………………………………………………………………………
u m r’ N m &
r ……………………………………………………………………………………………………………………
*M mum ll w l w rk g pr ur ……………… g/ m²(g)
* g mp r ur ………… ºC
RAW MATERIAL
Process of
m u ur ………………………………………………………………………………………………………………
Fully
k ll /r mm ……………………………………………………………………………………………………………………
Chemical
mp ……………………………… ……………………………………………………………………………
Heat
Num r……………………………………………… ……………………………………………………………………………
z …………………………………………………………………………………………………………………………………………
…
Test Certificate No.&
……………………………… ………………………………………………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1075
Name of the Steel
M k r……………………………………………… …………………………………………………………
Name of Inspecting
u h r y…………………………………………… ………………………………………………………
PIPES
Process of
m u ur ………………………………… …………………………………………………………………………
Main
m ………………………………………………………… ……………………………………………………………
T l r ……………………………………………………………………………………………………………………………
p …………………………………………………………………………………………………………………………
p p r w l ……………………………………… …………………………………………………………
Flattening tes ………………………………………………………………… ……………………………………………………
Other
……………………………………………………… …………………………………………………………………………
Tensile strength
……………………………………………………………… …………………………………………………………
Chemical
mp …………………………………………………… …………………………………………………………
Heat
r m …………………………………………… ……………………………………………………………………………
Hy r ul ………………………kg/ m² g
Identification mark of Inspecting Authority/Well known pipe maker
…………………… ……………………
Certified that the particulars entered herein are correct. The particulars of fabricated
component are shown in drawing No. ..................1076 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
The pipe has been designed and constructed to comply with the Indian Boiler Regulations
for a *Maximum allowable working pressure of _____________ kg/cm²(g) and *maximum
temperature of ____________0C and satisfactorily withstood a water test of ____ Kg/cm²(g) on the
___________ day of ____________ 20___, in the presence of our responsible representative whose
signature is appended hereunder.
M k r’ R pr v Maker
(Name and signature) (Name and Signature)
We have satisfied ourselves that the ________ have been constructed in accordance with
Indian Boiler Regulations 2026. The tests conducted on the samples taken from the finished pipes
have been witnessed by us and the particulars entered herein are correct.
Name and signature of Name and signature of
Competent Person Inspecting Authority/Well Known Pipe Maker
Place _______________
Date ________________
NOTE (1): This form is intended for the use by bothpipe makers and piping fabricators.
Only such of the columns or paragraphs that are applicable, or information that
can be obtained and furnished from other certificates, need to be filled or
entered in this form.
NOTE (2): In the case of fabrications made from steel pipes obtained from elsewhere,
p r ul r r g r h “m r l” “p p ” h ll k r m m l r
forms of certificates obtained in respect of pipes and noted in the appropriate
columns or paragraphs.
NOTE-(3): For Stock and sale purpose, one Form shall be issued for not more than five
pipes.
NOTE-(4): From Well-known pipe makers, digitally signed on-line Form shall also be
accepted.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1077
NOTE-(5): For Well-known Pipe Makers, Signatures of Competent Person and Inspecting
Authority are not required.
NOTE-(6): * Applicable only for Piping fabricators.
In the case of pipes made from steel, made and tested by well-known Steel Makers in India or other
u r , p r ul r r g r g h ‘m r l’ r y h m F rm V r -A) shall be noted in the
appropriate columns or paragraphs of Raw material in this certificate.1078 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form IV(C):R01 Dated: xx.xx.2026
FORM-IV
(PART-C)
[See regulation 11 ]
CERTIFICATE OF MANUFACTURE AND TEST FOR TUBES
Certificate No. --------------- Date: --------
-
N m p r & Qu y…………………………………………………………………………………………………………………
r w g N …………………………………………………… ……………………………………………………………………………………
M k r’ m
r ……………………………………………… ……………………………………………………………………
u m r’ N m &
r …………………………………………… ……………………………………………………………………
*M mum ll w l w rk g pr ur …………………… kg/ m²(g)
* g mp r ur …………… °
RAW MATERIAL
r m u ur …………………………………………………………………………………………………………
Fully
k ll /r mm …………………………………………………………………………………………………………………….
Chemical
mp ………………… …………………………………………………………………………………………
Heat
Num r…………………………… ………………………………………………………………………………………………
z …………………………………………………………………………………………………………………………………………
…[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1079
Test Certificate No.&
…………………………… ………………………………………………………………………
Name of the Steel
M k r……………………………………………… …………………………………………………………
Name of Inspecting
u h r y………………………………………… ………………………………………………………
TUBES
r m u ur ………………………………………………………………………………
Main dimensions
………………………………………………………… ……………………………………………………………
T l r ………………………………………………………………………………………………………………………………
…
p ……………………………………………………… …………………………………………………………………
…
Tensile
r g h………………………………………………………………………………………………………………………
Chemical
mp ………………………………………………………………………………………………………………
Elongation
p r g ………………………………………………… …………………………………………………………
Bend
……………………………………………………………… ………………………………………………………………
Flattening
………………………………………………………… ………………………………………………………………
Crushing
……………………………………………………………………………………………………………………………1080 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Flare
……………………………………………………………… …………………………………………………………………
Fl g ………………………………………………………………………………………………………………………………
…
Other Tests
Heat
r m …………………………………………………………………………………………………………………………
Hy r ul ……………………………………… kg/ m²(g)
I m rk I p g u h r y/W ll k w u m k r …………………… ……………………………
Certified that the particulars entered herein are correct. The particulars of fabricated
component are shown in drawing No. ..................
The tube has been designed and constructed to comply with the Indian Boiler Regulations
for a *Maximum allowable working pressure of _____________ Kg/cm²(g) and *maximum
temperature of ____________ºC and satisfactorily withstood a water test of ____ Kg/cm²(g) on the
___________ day of ____________ 20___, in the presence of our responsible representative whose
signature is appended hereunder.
M k r’ R pr v Maker
(Name and signature) (Name and Signature)
We have satisfied ourselves that the ________ have been constructed in accordance with Indian
Boiler Regulations 2026. The tests conducted on the samples taken from the finished tubes have
been witnessed by us and the particulars entered herein are correct.
Name and signature of Name and signature of
Competent Person Inspecting Authority/Well Known Tube Maker[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1081
Place ________________
Date ________________
NOTE (1): This form is intended for the use by both tube maker and tube fabricators. Only such of
the columns or paragraphs that are applicable, or information that can be obtained and
furnished from other certificates, need to be filled or entered in this form.
NOTE (2): In the case of fabrications made from steel tubes obtained from elsewhere, particulars
r g r h “m r l” “Tu ” h ll k r m m l r rm r
obtained in respect of tubes and noted in the appropriate columns or paragraphs.
NOTE-(3): For Stock and sale purpose, one Form shall be issued for not more than ten tubes.
NOTE-(4): From well-known tube manufacturers, digitally signed on-line Form shall also be
accepted.
NOTE-(5): For Well-known Tube Maker, Signatures of Competent Person and Inspecting
Authority are not required.
NOTE-(6): *Applicable only for tube fabricators
In the case of tubes made from steel, made and tested by well-known Steel Makers in India or other
u r p r ul r r g r g h ‘m r l’ r y h m F rm V r -A) shall be noted in the
appropriate columns or paragraphs of Raw material in this certificate.1082 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form IV(D):R01 Dated: xx.xx.2026
FORM-IV
(PART-D)
[See regulation 12]
CERTIFICATE OF MANUFACTURE AND TEST OF BOILER MOUNTINGS AND FITTINGS
r N ………… : ……………………
Name of
p r …………………………………………………………………………………………………………………………………………
Qu y …………………………………………………………………………………………… Sl.
N ………………………
Drawing
N ……………………………………………………………………………………………………………………………………………
M k r’ m
r ………………………………………………………………………………………………………………………
u m r’ N m &
r ……………………………………………………………………………………………………………………
M mum ll w l w rk g pr ur …………… kg/ m2 (g)
Design temperature…………… °
Hydraulic pr ur …………………………………………………………… kg/ m2 (g)
Main
m ……………………………………………………………………
p ………………………………………………………………………… ............
......
I p g u h r y’ I
M rk ………………………………………………………………………………………………
Chemical
mp …………………………………………………… ………
Physical test
r ul ………………………………………………………………… ……[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1083
(i) tensile
r g h………………………………………………………………
(ii) transverse bend
………………………………………………… ………
(iii) elo g …………………………………………………………
..
Other
T ……………………………………………………………… ………
RAW MATERIAL
r m u ur ………………………………………………………………
Fully k ll /r mm ……………………………………………………………
p ………………………………………………………
H Num r…………………………………………………………
z ……………………………………………………………………………………
T r N & ………………………………………
N m h M k r……………………………………………………………
N m I p g u h r y………………………………………………………
Certified that the particulars entered herein by us are correct.
The ___________ has been designed and constructed to comply with the Indian Boiler
Regulations 2026 for a Maximum allowable working pressure of ____________ kg/cm2(g)
and maximum temperature of ______ °C and satisfactorily withstood a hydraulic test using water or
kerosene or any other suitable liquid to a pressure of ____________kg/cm2(g)on the __________1084 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
day of ________________ 20___ in the presence of our responsible representative whose signature
is appended hereunder:
Maker Representative MAKER
(Name and signature) (Name and Signature)
We have satisfied ourselves and the _________ has been constructed and tested in
accordance with the requirements of the Indian Boiler Regulations, 2026. We further certify that the
particulars entered herein are correct.
Name and signature of Name and signature of
Competent Person Inspecting Authority
who witnessed the tests
Place _______________
Date ________________
Note: (1) In the case of valve chest made and tested by well-known Foundries
or Forges recognized by the Central Boilers Board in the manner as laid
down in regulations17 to 21, particulars regarding the material as certified
by them, in Form-IV(Part-G) / Form-IV(Part-H)& Form-V(Part-A), shall be
noted in the appropriate columns or paragraphs in the certificates and in
case of certificates from Well Known Foundries or Forges is produced, such
certificate may be accepted in lieu of the certificate from Inspecting
Authority in so far as it relates to the testing of material specified in the
Form.
(2) In case of safety valves, details and test results as required in item No.8 of
Form-IV(Part-A) shall also be furnished duly signed by manufacturer and
inspecting authority.
(3) For Stock and sale purpose, one Form shall be issued for not more than fifty
mountings and fittings.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1085
Form IV(E):R01 Dated: xx.xx.2026
FORM-IV
(PART-E)
[See regulation 13 and 50 to 57 ]
CERTIFICATE OF MANUFACTURE AND TEST OF CASTINGS
Certificate No. and date
Heat Number* and date of pouring
M k r’ m r ……
u m r’ m r …………………………………………………………
r w g N ………………………………………………………………………………………
Description and quantity_____________________________________________Sl. No.____________
Foundry identification__________________________________
Chemical composition
Heat treatment
Physical test results.
(i) Tensile strength
(ii) Transverse bend test
(iii) Elongation
(iv) Other tests
Certified that the particulars entered herein by us are correct. This satisfies the requirements of
Indian Boiler Regulations, 2026.
M k r’ R pr v Maker
(Name and signature) (Name and Signature)
Name and signature of Name and signature of
Competent Person Inspecting Authority/Well Known
foundry
*for castings of size more than 100mm Heat number must be as Cast except for Investment castings.
NOTE: Castings can be as cast, rough-machined or final machined.1086 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form IV(F):R01 Dated: xx.xx.2026
FORM-IV
(PART-F)
[See regulation 14 and 58 to 62]
CERTIFICATE OF MANUFACTURE AND TEST OF FORGINGS
Certificate No. and date
Heat Number
Details of raw material
M k r’ m r ……
u m r’ m r …………………………………………………………
r w g N ………………………………………………………………………………………
Description and quantity______________________________ Sl.No._____________________
Forge shop identification__________________________________
Chemical composition
Heat treatment
Physical test results.
(i) Tensile strength
(ii) Transverse bend test
(iii) Elongation
(iv) Other tests
Certified that the particulars entered herein by us are correct.This satisfies the requirements of
Indian Boiler Regulations, 2026.
M k r’ R pr v Maker
(Name and signature) (Name and Signature)
Name and signature of Name and signature of
Competent Person Inspecting Authority/Well Known Forge.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1087
Form IV(G):R01 Dated: xx.xx.2026
FORM-IV
(PART-G)
[See regulation 15 ]
CERTIFICATE OF MANUFACTURE AND TEST FOR (HEADERS,
DESUPERHEATERS/ATTEMPERATOR, BLOWDOWNTANK, FEEDWATERTANKS,
ACCUMULATOR, DEAERATOR)
T NO : ……………………………………………………… T : ………………………………………………
Name of the Part : …………………………………………………
Maker's Name & Address : ……………………………………………….
Customer's Name & Address : …………………………………………………
Drawing No. : ……………………………………
Maximum allowable :
working pressure
(kg/cm²(g))
Process of Manufacture, Design Temp.(oC) :
Refer enclosed Raw
Heat Treatment :
Material condition, material Test Certificates
or Form-V(Part-B) in lieu Hydraulic Test :
of Raw material Test Pressure
chemical composition,
Certificates
Non-destructive :
Tensile Strength, Testing
Tolerances,
Bend Test, Flattening Test
etc.
Inspecting Authority Identification Mark:
Item No. PART NAME MATERIAL SIZE QUANTITY MELT No.
01 PIPE
02 END COVER
03 STUBS
04 BRANCH PIPES
05
06
Certified that the particulars entered herein are correct.1088 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
The parts have been constructed to comply with the Indian Boiler Regulations, 2026 for a
Maximum allowable working pressure of --------------------- and temperature of -------------- and
satisfactorily withstood a water test of ----------------on the --------------day of ------------------- in the
presence of our responsible representative whose signature is appended hereunder.
Signature and Seal of Maker's Representative Signature and Seal of Maker
F l I p : ………………………………………………
W h v ur lv h h ……………………… h v ru r w h
Indian Boiler Regulations, 2026. The tests conducted have been witnessed by us, wherever applicable and the
particulars entered herein are correct.
Name and Signature of Competent Person Name and Signature of Inspecting Authority
l :…………………………………
:…………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1089
Form IV(H):R01 Dated: xx.xx.2026
FORM-IV
(PART-H)
[See regulation 16 ]
CERTIFICATE OF MANUFACTURE AND TEST FOR DISHED ENDS / END COVERS
T.C.NO.: ………………………………… T : …………………………………………………
Name of the Part :
Maker's Name & Address :
Customer's Name & Address :
Drawing No. : Maximum allowable :
working pressure
(kg./cm²(g))
Process of Manufacture, Design Temp.(ºC) :
Refer enclosed Raw
Heat Treatment :
material Test Certificates or
Material condition,
Hydraulic Test Pressure :
Form-V(Part-B) in lieu of
Raw material Test
chemical composition, Certificates Non-destructive Testing :
:
Tensile Strength,
Tolerances,
Bend Test, Flattening Test
etc.
Inspecting Authority Identification Mark:
ITEM No. PART NAME MATERIAL QUANTIT MELT No. / TC NO &
SPECN.
SIZE Y PLATE NO. DATE
01 PLATE / FORGING
Certified that the particulars entered herein are correct.
Signature and Seal of Maker's Representative Signature and Seal of Maker
Final Inspection Date:1090 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
We have satisfied ourselves that the _____________have been constructed in accordance with the
Indian Boiler Regulations, 2026. The test conducted have been witnessed by us and the particulars entered
herein are correct.
Name and Signature of Competent Person Name and Signature of Inspecting Authority
l :……………………………
:………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1091
Form V(A):R01 Dated: xx.xx. 2026
FORM-V
(PART-A)
[Regulation 8(d) ]
STEEL MAKER’S CERTIFICATE OF MANUFACTURE AND RESULTS OF TESTS
W h r y r y h h m r l r l w h m y M/ ……………… y
h ………………… pr , p r p ………………… r ll y ………………… h
satisfactorily tested in the presence of our Test House Manager or his representative in accordance
with the stipulated tests and tolerances.
For plates and bars, the physical properties are required to be mentioned whereas, for
ingots, billets, blooms, slabs and concast bars which are to be processed further, the physical
properties are not required to be mentioned by the steel manufacturer.
RESULTS OF TESTS
r e b m u N t a e H
r e
b m u N & d n a r B
t c
u d o r p f o e m a N h t g n e L ) s r e t e m ( h t d a e r
BS
) s r e t e m (
ize
r o s s e n k c ih T r e t e m a id ) m m (
s e
c e ip f o r e b m u N
e
lis n e t e t a m it lU
h t
g n e r t s g n ik a e r b2 m m / g k n i e g a t n e c r e P n o it a g n o lE s t s e T d n e B s k r a m e R
h m l ly ……………………………………………………………………………………………………………………………………………
O h r ……………………………………………………………………………………………………………………………………………………
M k r’ R pr v Maker
(Name and signature) (Name and signature)
We have satisfied ourselves that the ________ have manufactured the products in
accordance with Indian Boiler Regulations, 2026. The tests conducted on the samples taken from the
finished products have been witnessed by us and the particulars entered herein are correct.
Name and signature of Name and signature of
Competent Person Inspecting Authority/ Well Known Steel
Maker.
Place _______________
Date ________________1092 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form V(B):R01 Dated: xx.xx.2026
FORM-V
(PART-B)
[Regulation 8(d)]
CERTIFICATE OF MANUFACTURE AND RESULTS OF TESTS IN LIEU OF ORIGINAL TEST
CERTIFICATES
It is hereby certified that original Test Certificate contain the following information in
respect of the material used in the manufacture of the boiler or components thereof bearing Makers
Num r…………………… r g
r w g Num r :…………………………………………
Boiler Quantity size Cast/Heat No. Steel Making Specification
component Plate No. Process
1 2 3 4 5 6
Name of Steel Certificate No. & Date Heat Treatment
Maker/Part Maker
7 8 9
% Chemical Analysis CMnPSSi* other Yield strength U.T.S. Elongation % Bend Name of
alloying elements (Kg/mm2) (Kg/mm2) Gauge Length Test the
inspecting
authority
10 11 12 13 14 15
*(Carbon, Manganese, Phosphorus, Sulphur, Silicon).
Certified that the particulars entered herein by us are correct. This satisfies the requirements of
Indian Boiler Regulations, 2026.
M k r’ R pr v Maker
(Name and signature) (Name and Signature)
Name and signature of Competent Person Name and signature of Inspecting
Authority[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1093
Form VI(A):R01 Dated: xx.xx.2026
FORM-VI
(PART-A)
[See regulation 17(2) ]
QUESTIONNAIRE TO BE ANSWERED BY FIRMS/COMPANIES SEEKING RECOGNITION BY THE CENTRAL BOILERS
BOARD TO BECOME AN “INSPECTING AUTHORITY”
1. The registered name and address of the company/firm:
2. Address for correspondence:
3. The year in which the company/firm was established.
4. Proposed countries/areas of operation as Inspecting Authority:
5. Is company/firm registered in the proposed countries of operations?
If so, please give details thereof.
6. Have you any Branch or Associate Office?
If so, please give their names and addresses.
7. Is company/firm functioning as an Inspecting Authority under the Indian or International codes and
standards?
If so, details thereof.
8. In case of renewal of recognition as Inspecting Authority under the Indian Boiler Regulations, 2026, had you
conducted inspection during the last five years?
If yes, details thereof.
9. Is company/firm involved in any commercial activity other than inspection, certification and related activities
under the Indian or International Codes and standards?
If so, details thereof.
10. Please state the types, size and the range of Design pressure of the boilers which you have so far
inspected during manufacture as an Inspecting Authority, also state the classes of service you render,
namely: -
(a) Please name the various stages of manufacture at which inspections are carried out.
(b) Only hydraulic test after the manufacture of the boiler.
11. How many Inspectors/Competent persons have you in your employment? Please give details of the
qualifications held by those persons.
12. Have you any Testing Laboratory of your own to conduct all destructive and non-destructive tests
required in connection with the manufacture of boilers?
If so, details thereof.
13. Have you in-house design and drawing inspection office?
If so, details thereof.
14. Have you any documented quality programme established and maintained to fulfill the inspection
requirements as per Indian Boiler Regulations, 2026?
If so, details thereof.1094 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
15. Are you having Curriculum Vitae of all the inspectors/competent persons employed in the organization for
inspection and certification work?
16. Are you having a training programme for Inspectors/Competent persons?
If so, details thereof.
17. Are you prepared to conduct the work of Inspection of boilers, economisers and their accessories strictly
in conformity with the Indian Boiler Regulations, 2026?
18. Are you prepared to accept full responsibility for the certificate issued by you?
19. Has your request for recognition as an Inspecting Authority been rejected by any Authority? If so, please
give details.
20. Are you prepared to issue certificates for the products, you inspect, in the formats of the Indian Boiler
Regulations?
21. Are you aware that the recognition is for a period of five years only, which is renewable after every five
years on fresh assessment?
NAME, SIGNATURE &
SEAL[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1095
Form VI(B):R01 Dated: xx.xx.2026
FORM-VI
(PART-B)
[See regulation 17(2) ]
QUESTIONNAIRE FOR ELICITING INFORMATION REGARDING THE COMPETENCY OF A FIRMOR COMPANY TO
BE RECOGNISED AS “COMPETENT AUTHORITY”
1. Registered name and address of the company/firm.
2. Address for correspondence.
3. Year in which the company/firm was established.
4. Address of branch or associate office, if any.
5. Principal work of the company/firm.
6. Does the company/firm have any training section for the welders? If so, details of the scheme to be
stated.
7. Does the company/firm regularly conduct tests on welds done by its welders? If so, the code
followed and the details of tests carried out may please be stated.
8. What are the facilities that can be provided or availed of by the organisation for conducting the tests?
9. Is the company/firm prepared to undertake testing of welders employed by other organisation?
10. In case of renewal of recognition as Competent Authority under the Indian Boiler Regulations, 2026,
have you undertaken inspection and certification of welders during the last five years?
If yes, details thereof.
11. Whether the company/firm is prepared to conduct tests as per requirements of the Indian Boiler
Regulations, 2026?
12. The amount of fee which the company/firm would charge from a candidate for conducting a test for
the issue of certificate. Estimates under the following heads may be given:
(a) For the supply of tests pieces, electrodes and/or filler rods:
(b) For the use of welding machine:
(c) For machining the test pieces and preparation of specimen:
(d) For conducting mechanical tests (including specimen preparation):
(e) For non-destructive testing:
13. Is the company/firm prepared to examine and issue certificate to welders in accordance with the
requirements of the Indian Boiler Regulations, 2026?
14. Is the company/firm prepared to take full responsibility for certificates issued by it.
15. Are you aware that the recognition is for a period of five years only which is renewable after every
five years on fresh assessment?
NAME, SIGNATURE & SEAL1096 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form VI(C):R01 Dated: xx.xx.2026
FORM-VI
(PART-C)
[See regulation 17(2) ]
QUESTIONNAIRE TO BE ANSWERED BY STEEL MAKER SEEKING RECOGNITION BY CENTRAL BOILERS BOARD
TO BE NOTIFIED AS “WELL KNOWN STEEL MAKERS”
1. Registered Name and address of the firm/company:
2. Works address:
3. The year in which the factory was established:
4. Capacity for production of steel:
5. Process of manufacture of steel:
6. Variety of steel products:
7. Range of steel produced in each variety:
8. Various national and international Standards to which the steel products are manufactured:
9. Testing facilities available within the works:
10. Types of tests conducted:
11. If so, by whom conducted:
12. Are the tests conducted by the firm/company acceptable to the other organisations of the country? If
so, by whom?
13. Is the firm/company prepared to conduct tests in accordance with the Indian Boiler Regulations,
2026?
14. Is the firm/company r g “W ll w l M k r” y h r u ry?
15. Wh h r h rm/ mp y h m mum w y r ’ p r pr u l r w h
the provision of Indian Boiler Regulations under the inspection of any recognised Inspecting
Authority.
If yes, details thereof.
16. Whether the firm/company is prepared to furnish certificates under the provision of Indian Boiler
Regulations, 2026.
17. In case of renewal of recognition, had you manufactured and supplied steel “W ll w l
M k r” u r h I l r R gul ur g h l v y r ?[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1097
If yes, details thereof.
18. Whether the firm/company manufacture steel from the ore itself or from ore and scrap or scrap only:
19. Whether the firm is agreeable to show their manufacturing process and in-house testing facilities to a
team consisting of three members appointed by the Board.
20. Are you aware that the recognition is for a period of five years only which is renewable after every
five years on fresh assessment?
NAME, SIGNATURE & SEAL1098 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form VI(D):R01 Dated: xx.xx.2026
FORM-VI
(PART-D)
[See regulation 17(2)]
QUESTIONNAIRE TO BE ANSWERED BY FOUNDRY/FORGE SEEKING RECOGNITION BY CENTRAL BOILERS
BOARD TO BE NOTIFIED AS “WELL KNOWN FOUNDRY/FORGE”
1. The registered name and address of the firm/company:
2. Works address:
3. The year in which the factory was established:
4. Capacity of the foundry/forge:
5. (i) Capacity for production of forgings/castings:
(ii) Maximum weight and size of forgings/castings:
6. Detailed description of the type of job done by the firm/company:
7. Materials of castings/forgings (ferrous-plain or alloy steel, non-ferrous alloys):
8. Range of forgings/casting produced in each variety:
9. Testing facilities available within the works:
10. Details of testing facility, namely chemical and physical tests:
11. Types of test conducted:
12. If so, by whom conducted?
13. Are the tests conducted by the firm/company itself acceptable to the other organisations of the
country? If so by whom?
14. Is the firm/company prepared to conduct tests in accordance with the Indian Boiler
Regulations, 2026?
15. Is the firm/company r g “W ll w F u ry/F rg ” y h r u ry?
16. Whether the firm/company is in a position to produce forgings/casting in accordance with any
national/international specifications fulfilling the minimum requirements of Indian Boiler Regulations,
2026:
17. Whether the firm/company h m mum w y r ’ p r pr u rg g / g
accordance with the provision of Indian Boiler Regulations under the inspection of any recognised
Inspecting Authority.
If yes, details thereof.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1099
18. Whether the firm/company is prepared to furnish certificates under the provision of Indian Boiler
Regulations, 2026.
19. In case of renewal of recognition, had you manufactured and supplied casting / rg g “W ll
w F u ry/F rg ” u r h I l r R gul ur g h l v y r ?
If yes, details thereof.
20. Whether the firm/company is agreeable to show their process of manufacture, in-house testing
facilities to a team of members appointed by Central Boilers Board.
21. Are you aware that the recognition is for a period of five years only, which is renewable after every
five years on fresh assessment?
NAME, SIGNATURE & SEAL1100 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form VI(E):R01 Dated: xx.xx. 2026
FORM-VI
(PART-E)
[See regulation 17(2) ]
QUESTIONNAIRE TO BE ANSWERED BY TUBE/PIPE MAKER SEEKING RECOGNITION BY CENTRAL BOILERS
BOARD AS “WELL KNOWN TUBE/PIPE MAKER”
1. Registered name and address of the firm/company:
2. Works address:
3. The year in which the factory was established:
4. Capacity of production of Tube/Pipe and the tonnage details per during the last three years:
5. Steel grades of Tube/Pipes under production:
6. Size range of Tubes/Pipes under production:
7. Process of manufacture of Tube/Pipes:
8. (a) Whether the firm/company is producing the raw material or purchasing the raw material.
(b) If the raw material is purchased, give the details of purchase in last three years.
i. from well-known steel makers under Indian Boiler Regulations.
ii. from other sources.
9. If purchase is as per 8(b)(ii), wh h r h r w m r l Tu m k r’ / p
m k r’ pr m u r I l r R gul
10. If the firm/company is producing raw material, state whether the firm/company is recognised as
Well Known steel maker under Indian Boiler Regulations.
11. Major manufacturing facilities available with the firm/company:
12. Testing facilities available with the works:
13. Types of tests conducted on Tubes/Pipes (enclose complete quality control plan from raw
material stage to finished stage along with the quality control and inspection personnel of the
firm):
14. The details of failures and rejection
(a) By Non-Destructive Testing(NDT)
(b) By Destructive Testing.
15. Whether the firm/company is in a position to manufacture Tubes/Pipes and also provide for their
necessary testing facilities in accordance with the provision in Indian Boiler Regulations, 2026.
16. Wh h r h rm/ mp y h m mum w y r ’ p r pr u Tu / p
accordance with the provision of Indian Boiler Regulations under the inspection of any recognised
Inspecting Authority.
If yes, details thereof.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1101
17. Whether the firm/company is prepared to furnish certificates under the provision of Indian Boiler
Regulations, 2026.
18. In case of renewal of recognition, had you manufactured and supplied Tub / p “W ll
w Tu / p M k r” u r h I l r R gul ur g h l v y r ?
If yes, details thereof.
19. The name of the firms to whom the firm /company has supplied Tubes/Pipes:
20. Whether the firm/company is agreeable to show their manufacturing process and in-house
facilities to a team consisting of three members appointed by the Board.
21. Whether the firm/ company is aware of the fact that the recognition is for a period of five years
only, which is renewable after every five years term on fresh assessment?
NAME, SIGNATURE& SEAL1102 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form VI(F):R01 Dated: xx.xx. 2026
FORM-VI
(PART-F)
[See regulation 17(2) ]
QUESTIONNAIRE TO BE ANSWERED BY A LABORATORY SEEKING RECOGNITION BY CENTRAL BOILERS BOARD
AS A “WELL-KNOWN MATERIAL TESTING LABORATORY”
1. The registered name and address of the laboratory:
2. Address of the laboratory:
3. The year in which the laboratory was established:
4. (a) Whether the laboratory is recognised by the Central Government or by a State Government:
(b) If so, please furnish particulars of recognition:
5. Name and address of branch or associate laboratory, if any:
6. How long the laboratory has been functioning for testing of the products?
7. Equipment or machines available in the laboratory for carrying out the non-destructive or destructive
testing:
8. Type and range of tests carried out by the laboratory:
9. Details of testing personnel and their qualifications or experience:
10. Are you prepared to conduct the testing of specimens strictly as per the requirements of the Indian
Boiler Regulations, 2026?
11. Has your request for recognition as an approved laboratory been rejected by any authority? If so,
please give details.
12. Are you prepared to issue the certificates for the products you test in the formats of the Indian Boiler
Regulations, 2026?
13. Wh h r y u h v m mum w y r ’ p r u g r w h h
provision of Indian Boiler Regulations under the inspection of any recognised Inspecting Authority.
If yes, details thereof.
14. In case of renewal of recognition, had you conducted tests under the provisions of Indian Boiler
Regulations during the last five years?
If yes, details thereof.
15. Are you agreeable to show your laboratory and in- house facilities to a team consisting of three
members appointed by the Board?
16. Are you aware that the recognition is valid for a period of five years only, which is renewable for five
years on fresh assessment?
NAME, SIGNATURE & SEAL[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1103
Form VI(G):R01 Dated: xx.xx.2026
FORM-VI
(PART-G)
[See regulation 17(2) ]
QUESTIONNAIRE TO BE ANSWERED BY A FIRM SEEKING RECOGNITION BY CENTRAL BOILERS BOARD AS
“REMNANT LIFE ASSESSMENT ORGANISTION” UNDER REGULATIONS 313 to 315
1. The registered name and address of the firm/company:
2. Address of the firm/company:
3. The year in which the firm /company was established:
4. (a) Whether the firm/company is recognised by the Central Government or by State
Government:
(b) If so, furnish particulars of recognition:
5. Name and address of branch or associate firm, if any:
6. How long your firm has been functioning for Remnant Life Assessment of Boilers and Boiler
Parts:
7. Equipment or machines available in the laboratory for carrying out the non-destructive or
destructive testing:
8. Type and range of tests carried out by the firm/company:
9. Details of testing personnel and their qualifications and experience:
10. Are you prepared to conduct the testing of specimens strictly as per the requirements of the
Indian Boiler Regulations, 2026?
11. Has your request for recognition as an approved organisation been rejected by any authority?
If so, please give details.
12. Are you prepared to issue the certificates for the tests recommended in the formats of the
Indian Boiler Regulations, 2026?
13. In case of renewal of recognition, had you conducted Remnant Life Assessment of Boilers and
Boiler parts under the Indian Boiler Regulations during the last five years?
If yes, details thereof.1104 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
14. Are you agreeable to show your laboratory and in-house facilities to a team consisting of three
members appointed by the Board?
15. Are you aware that the recognition is valid for a period of five years only, which is renewable for
five years on fresh assessment.
NAME ,SIGNATURE& SEAL[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1105
Form VII(A):R01 Dated: xx.xx. 2026
FORM-VII
(PART-A)
[See regulation 19]
NATIONAL EMBLEM
r l N ………………………… F l N ……………………
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR INSPECTING AUTHORITY
This is to certify that the Inspection and Quality Management System of:
M/s ________________________________
________________________________
________________________________
_________________________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 19 of the
Indian Boiler Regulations, 2026, as an INSPECTING AUTHORITY for operation in
This certificate is valid for five year , up …………………………
Validity is subject to the adherence to the quality control prescribed under the provisions of the Indian Boiler
Regulations, 2026.
_______________
Date of Issue
Certificate No. -------------- _________________
Secretary1106 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form VII(B):R01 Dated: xx.xx. 2026
FORM-VII
(PART-B)
[See regulation 19]
NATIONAL EMBLEM
r l N …………………… F l N …………………………………
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR COMPETENT AUTHORITY
This is to certify that the Examination of Welder System of:
M/s _______________________
_______________________
_______________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 19 of the
Indian Boiler Regulations, 2026, as a COMPETENT AUTHORITYfor operation in
This certificate is valid for five y r , up ………………………
Validity is subject to the adherence to the quality control prescribed under the provisions of the Indian Boiler
Regulations, 2026.
_________________
Date of Issue
Certificate No.___________ ________________
Secretary[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1107
Form VII(C):R01 Dated: xx.xx. 2026
FORM-VII
(PART-C)
[See regulation 19]
NATIONAL EMBLEM
r l N …………………… F l N ……………………………
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR WELL-KNOWN STEEL MAKER
This is to certify that the Inspection and Quality Management System of:
M/s _________________________
_________________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 19 of the
Indian Boiler Regulations, 2026, as WELL KNOWN STEEL MAKER, for the manufacture of
_____________________
__________________________________________________________________________________________
___
for their factory at ________________________________
________________________________
_________________________________
_________________________________
This certificate is valid for five years, i.e. upto_______________________
Validity is subject to the adherence to the quality control prescribed under the provisions of the
Indian Boiler Regulations, 2026.
_________________
Date of Issue
Certificate No.____________ ________________
Secretary1108 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form VII(D):R01 Dated: xx.xx. 2026
FORM-VII
(PART-D)
[See regulation 19]
NATIONAL EMBLEM
r l N …………………………… F l N ………………………
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR WELL-KNOWN FOUNDRY
This is to certify that the Inspection and Quality Management System of:
M/s. _______________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 19 of the
Indian Boiler Regulations, 2026 as a WELL KNOWN FOUNDRY for the manufacture of
__________________________________________________________________________________________
___
for their factory at ________________________________
________________________________
_________________________________
_________________________________
This certificate is valid for five years, i.e. upto_______________________
Validity is subject to the adherence to the quality control prescribed under the provisions of the Indian Boiler
Regulations, 2026.
_________________
Date of Issue
Certificate No.____________ ________________
Secretary[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1109
Form VII(E):R01 Dated: xx.xx. 2026
FORM-VII
(PART-E)
[See regulation 19]
NATIONAL EMBLEM
r l N …………………… F l N ………………………
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR WELL KNOWN FORGE
This is to certify that the Inspection and Quality Management System of:
M/s __________________________
__________________________
__________________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 19 of the
Indian Boiler Regulations, 2026 as a WELL KNOWN FORGEfor the manufacture of
__________________________________________________________________
for their factory at ________________________________
________________________________
This certificate is valid for five years, i.e. upto_______________________
Validity is subject to the adherence to the quality control prescribed under the provisions of the Indian Boiler
Regulations, 2026.
__________________
Date of Issue
Certificate No.___________ __________________
Secretary1110 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form VII(F):R01 Dated: xx.xx. 2026
FORM-VII
(PART-F)
[See regulation 19]
NATIONAL EMBLEM
r l N ………………… F l N …………………………
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR WELL KNOWN TUBE MAKER
This is to certify that the Inspection and Quality Management System of:
M/s __________________________
__________________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 19 of the
Indian Boiler Regulations, 2026, as a WELL KNOWN TUBE MAKER for the manufacture of Tubes of sizes from
_______________________________ to ________________________________
for their factory at ________________________________
________________________________
This certificate is valid for five years, i.e. upto _______________________
Validity is subject to the adherence to the quality control prescribed under the provisions of the Indian Boiler
Regulations, 2026.
_______________
Date of Issue
Certificate No.__________ ______________
Secretary[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1111
Form VII(G):R01 Dated: xx.xx. 2026
FORM-VII
(PART-G)
[See regulation 19]
NATIONAL EMBLEM
r l N ………………… F l N …………………………
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL FOR WELL KNOWN PIPE MAKER
This is to certify that the Inspection and Quality Management System of:
M/s __________________________
__________________________
__________________________
has been evaluated by the Central Boilers Board and has been granted recognition under regulation 19 of the
Indian Boiler Regulations, 2026, as a WELL KNOWN PIPE MAKER for the manufacture of pipe of sizes from
_________________________________ to _______________________________
for their factory at _______________________________
________________________________
_________________________________
_________________________________
This certificate is valid for five years, i.e. upto_______________________
Validity is subject to the adherence to the quality control prescribed under the provisions of the Indian Boiler
Regulations, 2026.
_______________
Date of Issue
Certificate No.__________ ______________
Secretary1112 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form VII(H):R01 Dated: xx.xx. 2026
FORM-VII
(PART-H)
[See regulation 19]
NATIONAL EMBLEM
r l N ………………… F l N …………………………
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL AS WELL-KNOWN MATERIAL TESTING LABORATORY
This is to certify that after evaluation of the inspection and material testing system of the following laboratory,
the Central Boilers Board has granted recognition to it under regulation 19 of the Indian Boiler Regulations,
2026, as a Well-known Material Testing Laboratory.
M/s _________________________
_________________________
_________________________
________________________
This certificate is valid for five years, i.e. upto____________________
Note: The recognition will be as per the standards specified under the provisions of the Indian Boiler
Regulations, 2026.
_______________
Date of Issue
Certificate No.__________ ______________
Secretary[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1113
Form VII(I):R01 Dated: xx.xx. 2026
FORM-VII
(PART-I)
[See regulation 19]
NATIONAL EMBLEM
r l N ………………… File
N …………………………
CENTRAL BOILERS BOARD
CERTIFICATE OF APPROVAL AS WELL KNOWN REMNANT LIFE ASSESSMENT
ORGANISATION
This is to certify that after evaluation of the inspection and material testing system of the
following firm, the Central Boilers Board has granted recognition to it under regulation 19 of the
Indian Boiler Regulations, 2026 as a Well Known Remnant Life Assessment Organisation.
M/s._____________________
_________________________
This certificate is valid for five years, i.e. upto_______________________
_______________
Date of Issue
Certificate No.__________ ______________
Secretary1114 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form VIII:R00 Dated: xx.xx. 2026
FORM-VIII
(Regulation 293 )
MAKER’S NAME & ADDRESS
FINAL INSPECTION REPORT FOR BOILER COMPONENTS
REPORT NO: DATE:
THIS IS TO CERTIFY THAT THE PRESSURE PARTS DETAILED BELOW HAVE BEEN INSPECTED AND
CLEARED UNDER THE INDIAN BOILER REGULATIONS, 2026.
BOILER NO.:
SL. PRODUCT DRAWING NO. DESCRIPTION QTY COMPETENT PERSON
NO. IDENTIFICATION NO. IDENTIFICATION
MARK
Signature and Seal of Maker’s Representative Name and signature of Competent Person[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1115
Form IX:R01 Dated: xx.xx. 2026
FORM-IX
[See regulation 295(7) and 295(8) ]
DETAILS TO BE FURNISHED ALONGWITH APPLICATION FOR INSPECTION OF BOILER AFTER
TWELVE/THIRTY SIX MONTHS OF THE CERTIFICATION UNDER REGULATION 311 AS PER
APPENDIX ‘H’ AND APPENDIX ‘I’
1. Name and address of the owner
2. Registry number of the boiler
3. Steam pressure and temperature
4. Rate of steam generation
5. Heating surface
6. Year of make
7. Brief description of boiler
8. Type of construction (Whether riveted or welded)
9. Whether fired or waste heat boiler
10. Date of registration
11. Details of past exemption granted by the Government, if any
12. Date of last annual inspection
13. Expiry date of current certificate
14. Maximum working pressure at which last certificate was issued
15. Details of past repairs (year-wise)
16. Remark as entered in the last certificate
17. Quality of boiler feed water
18. Whether requisite number of feed pumps are in satisfactory working condition at present?
19. Number of safety valves mounted on shell/drum and super heater
20. Total number of soot blowers provided in boiler
21. Number of soot blowers in working condition
22. Whether safety valves are blowing satisfactorily at or below
design pressure?
23. Whether safety valve assembly is free from jamming as verified by
operating casing lever?
24. Whether high and low water level alarm is in good condition?
25. Whether main steam stop valves, feed check valves, blow down valves and master pressure gauge in
working condition?
26. Whether additional requirements for automatic boilers as per
r gul 8 r mpl w h? I ‘N ’, g v l
27. Last date of calibration for master pressure gauge, temperature indicator/recorder for superheater,
hot reheat, cold reheat and main steam line.
28. (a) Last date when boiler protection devices were satisfactorily tested and details thereof1116 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) Last date when boiler protection devices were tested by simulation
29. Details of boiler stoppages in last twelve months with reasons and remedies thereof
30. Present irregularities in instruments and controls if any observed in control-room of boiler house
31. Details of present boiler leakage
32. Present operating pressure of the boiler
33. Whether water quality is tested on-line (enclose copy of test report showing values of analysis
including Total Dissolved Solids (TDS)
34. State at what intervals such test is carried out
35. When boiler was last opened for internal and/or external
cleaning?
36. State at what intervals such cleaning is carried out
37. Whether there was any shut down since last inspection when the
boiler could have been offered for inspection?
38. Whether working pressure of the boiler ever exceeded in the past beyond certified limit? If any, give
details
39. Details of boiler accident which took place in the past, if any
40. List of Boiler Operation Engineers/Attendants
41. Irregularities, if any, noticed in the past in compliance of the Act
42. Whether guidelines laid down by Central Boilers Board for granting exemption to the waste heat
boilers are fulfilled or not?
Name and Signature of General Manager (Generation)
Remarks of the Competent Person who verified correctness of above statement paying check visit to the
Boiler House.
Name and signature of Competent Person[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1117
Form X :R01 Dated: xx.xx. 2026
FORM-X
[Regulation 300(2)]
PROVISIONAL ORDER UNDER SECTION 14 OF THE BOILERS ACT 2025
………………………… r h r y p rm u h ……………… l r R g ry N …………
l r r g …………… m y …………… r g M k r’ um r ……………… g pr ur
……………… kg/ m2(g) pending the issue of or refusal of a certificate within six months from the
date thereof after which period this order will become void.
Dated …………… Inspector of Boilers1118 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form XI:R01 Dated: xx.xx. 2026
FORM-XI
(Regulation 306)
BOILER INSPECTION DEPARTMENT
BOILER REGISTRY NUMBER
MEMORANDUM OF INSPECTION BOOK
OR
REGISTRATION BOOK[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1119
GENERAL
r …………………………………………
Ow r…………………………………………
r F ry…………………………
N r R lw y ……………………
F ry …………………………………… M ………………………………… r m
W rk r F ry Typ I u ry ……………………………
Working Se ……………………………
l r r g r …………………………… ………………………………………………………
R g r k N …………………………… g …………………………………………………
R g ry Num r……………………………… v r ……………………………………………
g pr ur l r …………………
l r R g…………………………………… I p F ………………………………………
R g r k F l …………………… ……………………………………………… ……
Remarks on transfers, etc.
PROVISIONAL ORDER AND CERTIFICATE RECORD
Fee Date of Date of Certificate No. Period of Design Pressure Main Steam Boiler Fuel Evaporation Initials of
(Rs.) payment inspection and date certificate of boiler outlet Temp. Rating used (T/hr or Kg/hr) Inspector/
[Kg/cm2(g)] (°C) Competent
Person
PARTICULARS AND DIMENSIONS
Type of Boiler: Leading Dimensions:
Maker: Intended Working Pressure:
Place and Year of make: Main Steam outlet temperature:
Description of Boiler: M k r’ Number:
l M k r’ mp
mp ……………………1120 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
M R’ RTIFI T
l r N m ………………………
M k r M u ur , hy r ul ……………kg/ m² g r w g N …… r v ……………
Inspecting N m ………………………
Authority T m r l, ru , up rv , hy r ul ……………… r v …………
DETAILS OF PRESSURE PARTS
S NO NAME OF THE PRESSURE PART SIZE MATERIAL SPECIFICATION
CYLINDRICAL SHELL
(a) (b)
Shell or Mud Drum Steam Drum
Name of parts
Number
Length between end plates
Length between end plates seam
Diameter inside largest belt
Thickness of Plates
Number of belts of plating
Longitudinal seams
’ l k
Circumferential seams
No. of seams (end and inner)
SHELL END PLATES AND STAYS
Fl , h , h m ph r l ……………………………………… p , y , l g
m r u , r ………… k,……… crow ………………… rg r l …………
R u urv ur r ………………………… k, ………………… r w …………………
R u urv ur , r r l g ,………… h ll, ………………… ur , …… up k , …
S
E
T l , h k , r …………… k, ……… r w ………………… u pl F,…… , …
A
L
P h h ll, r w r r , …………………
h h ll, k , ………………………
h up k r ur r w r r ,……
h ur lu , k ………………
S TGuA Y S y, N F , p, ………… m, ………… B.E., p, ……… m, …………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1121
g l y N …………………… , …………… ………… , …………
g l y p h, V r l …… H r z l…………… Circumferential ………
..
Diagl. D , ……………………………………………………………………………………………………
o
MANHOLES, HAND AND SIGHT HOLES, DOORS AND STAND BLOCKS
r m r l h r u r ……………………
No. and position
Framed or plate flanged
Boiler opening, length × width
Frame opening, length × width
S
Frame inside, outside, raised, pressed
E
L Frame solid, welded, cast
O
H Frame section on longtl. axis
N
A Door, type and thickness
M
Door, if inside, spigot clearance
Bolts, No. dia., threads Nut
Bolts, pitch circle
Compensation ring, width x thickness
N ………………………………… m …………………… p ………………
S
E
L
O mp r g ………… …………………………
H
T r , yp ………………………… l ,…… hr ……… p g l r ………
H
G
IS
Cleaning plugs, N ………………… …………………………… p …………………
H gh ……………………………… u , p,… m… h k ……… ……
K
C
O
.C
T p p l w p v lv , ……… h gh ,…… u …… h k ……… ……
L E
B
Fl g ……………………………
FIREBOX DETAILS
DETAILS OF FLUE TUBES
N pl , ……………… Stay overall l g h …… p ………
l , u ……… h k , … Front End.,welded, expd.,
S
E
B beaded, feruled. Smoke End.,
U
T
S
w l p , , r …
S
A
P y, u ……… h k , ………… F.E.,welded, expd., beaded, , S.E,welded, Expd., ..
II&
h pl u , V…… H……………………… …………… ………………
I
h y u , V … H…………………… ………… ………………
N pl , ……………… Stay overall l g h …… p ………1122 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
l , u ……… h k , … Front End.,welded, expd.,
beaded, feruled. Smoke End.,
w l p , , r …
y, u ……… thick , ………… F.E.,welded, expd., beaded,
S.E,welded, Expd., ..
h pl u , V … H ………………… ……… …………
h y u , V … H…………………… ……… …………
FURNACE, CROWN AND UPTAKE
N , ……………………………… Typ …………………………………
N r r g h Fur ………………………Longtl. seams position
L
A Length between
C
IT
Centre
R
E
V S Inside diameter
D E
N C
A
A
N
L R
A U Plate thickness
T
N F
O
Z
IR
Positions of
O
H cross tubes or
stiffener
MOUNTINGS AND FITTINGS
Number Diameter Type Material Bolted OR
welded to
Safety
Safety
.C
T Main. Stop
E
,S Aux. Stop
E
V
L Feed
A
V
Blow Down
Injector
S
W r g ug , N ………………………… yp ………………… T k N …………………
G
W r g ug , p l w r u ………… ……………………… mm v …………………
N
IT
T r ur g ug , Typ …………………… mm … r g ……… kg/cm² (g)
IF
S r ur g ug , M k r …………………… N ………… r l …………… kg/ m² g
U
O
E
N
A Fu l plug, yp ………………………… ……………………… p …………………………
L
L
E l w w p p ……………………
C
S
IM F pp r u ……………………………………………………………………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1123
A l g …………………………………………………………………………………………
SAFETY VALVES
(A) (B) (C)
N v lv h h ………………………
Typ ………………………………………………………
m r v lv mm …………………
m r N k mm ………………………..
m r u l mm ………………………
………………………………………………………………
__________________________________________________________________________________________1124 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
REQUISITE AREA OF SAFETY VALVES
For Saturated steam
E
A
C.P.
For Superheated steam
√
E = ; C = ; P = ; A =
As = ; T = ; Ts = ;
HEATING SURFACE
T l H g ur …………………………………………………………………………………………………………………………… q m
Boiler Rating
…………………………………………………………………………………… …………………………………………………………
HYDRAULIC TEST (REGISTRATION)
I p r ……………………… ……………………… T pr ur ……………… kg/ m² g
ur …………… m l r pr ur , g ug N … …………… u ………………
l r pr ur g ug mp r w h …………… …………………… u …………………………
l r ……………………………………………………………………………………………
r k w rk ……………………………………… gg g ……………… ………………………………………
Condition of boiler under test ……………………………………………………………………………………
l r m u g u r …………………………………………………… …………………
M I k pr p r y …………………… ……………………… u m ………………………
M I k h k y ………………… ………………………………………………………………
Chief Inspector/Director of Boiler’s remarks and signature[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1125
STEAM TEST (REGISTRATION)
I p r ………………………………………………… T ………………………………………
g pr ur l r ……… kg/ m² g T pr ur ……… kg/ m² g
l r ……………………………………… r …………………………………
Fu l u ……………………………………………… r ugh ……………………………………………
y V lv l ……………… kg/ m²(g) …… kg/ m² g …… kg/ m² g
Beginning 5 mins. 10 mins. 15 mins. Difference
T m g ……………………………
H gh w r gl …………………
r ur y l r g ug ………………
umul pr ur , % ………………………………………………………………………
y v lv ly r l v l r? ……………………………………………………………………
l r u r m …………………………………………………………………………………
m u g u r m …………………………………………………………………………
Th k w h r r rrul ………………………………………………………………………………
F pump r j r w rk …………………………………………………………………………………
W r g ug ………………………………………………………………………………………………
l r r l r Op r g r ……………………………………………………………
m l y v lv r r ……………………………………………………
NOTES ON WORKING OF BOILER
Boiler m u r ……………………………………………………………………………………………
, rm r l w rk ……………………………………………………………………
I l r r l v y p r l r? ………………………………………………………………………
N ur w r ………………………………………………………………………………………………
Fuel u …………………………… r pr ru k p r l r? ………………………
r w l g r mm y I p r ……………………………………………
___________________________________________________________________________________
_
STEAM-PIPES
PLAN OF MAIN STEAM-PIPES
Registry Nos. of connected boilers ……………………………
r v r r m h r l r …………1126 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
RECORDS OF INSPECTIONS AND TESTS
F r p y …………………… ……………………
First hydraulic test to kg/ m² g … y ……………………… ………………………
INSPECTION NOTES
PARTICULARS OF BOILER ATTENDANTS & BOILER OPERATION ENGINEER
Date of visit Name Grade Certificate No. Date of Issue[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1127
Form XII:R01 Dated: xx.xx. 2026
FORM-XII
(Regulation 310 )
CERTIFICATE FOR USE OF A BOILER
Registry Number of Boiler Type of Boiler
Boiler Rating Place and year of manufacture
Maximum Continuous Evaporation
Name of Owner
Situation of Boiler
Repairs
Remarks
Hydraulically Tested on to kg/cm2(g)
I hereby certify that the above described boiler is permitted by me/the Chief Inspector under the provisions
/ h l r , , w rk m mum pr ur ……………… kg/ m2(g) for the period from
………………
………………
Th l g h ……………… y v lv ……………… kg/ m2(g)
F R ……………… p ………………
………… h ………… y ………… ……
Name and signature of
Competent Person
Countersigned
Chief Inspector
R v r r “ ”
CONDITIONS
(REVERSE OF FORM XII)
(1) No structural alteration, addition of renewal shall be made to the boiler otherwise than in accordance
with section 18 of the Act.
(2) Under the provisions of Section 13 of the Act this certificate shall cease to be in force:
(a) on the expiry of the period for which it was granted; or
(b) when any accident occurs to the boiler; or
(c) when the boiler is moved the boiler, except a vertical boiler, the heating surface of which is less
than two hundred square feet, or a portable or vehicular boiler; or
(d) save as provided in section 17 of the Act, when any structural alteration, addition or renewal is
made in or to the boiler; or1128 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(e) if the Chief Inspector in any particular case so directs when any structural alteration, addition or
renewal is made in or to any steam-pipe attached to the boiler; or
(f) on the communication to the owner of the boiler of an order of the Chief Inspector or Inspector
prohibiting its use on the ground that it or any boiler component attached thereto is in a
dangerous condition.
Under Section 15 of the Act, when the period of a certificate relating to a boiler has expired,
the owner shall, provided that he has applied before the expiry of that period for a renewal of the
certificate be entitled to use the boiler at the design pressure entered in the former certificate,
pending the issue of orders on the application but this shall not be deemed to authorise the use of a
boiler in any of the cases referred to in clauses (b), (c), (d), (e) and (f) of sub-section (1) of section 13
occurring after the expiry of the period of the certificate.
(3) The boiler shall not be used at a pressure greater than the pressure entered in the certificate as
the Design pressure nor with the safety valve set to a pressure exceeding such design pressure.
(4) The boiler shall not be used otherwise than in a condition which the owner reasonably believes
to be compatible with safe working.
(5) Form XIIshall be countersigned by the Chief Inspector at the time of registration only, as per the
provisions of sub-section (6) of section 12 of the Act.
Note: The particulars and dimensions regarding this boiler may be obtained by the owner on payment in the
prescribed manner on application to the Chief Inspector.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1129
Form XIII:R01 Dated: xx.xx. 2026
FORM-XIII
[See regulation 316(2) ]
QUESTIONNAIRE FORM FOR REPAIRER OF BOILERS/ECONOMISER/STEAM LINE/FEED
WATER LINES
1. R g r m h rm p rm r …………………………………………………………………
(b) Address of the workshop:
2. Y r l hm ………………………………………………………………………………………………………………………………
3. Classification applied for—
(a) Special Class (For any Boiler Pressure)
(b) Class I (For Boiler Pressure upto 125 kg/cm2)
(c) Class II (For Boiler Pressure upto 40 kg/cm2)
(d) Class III (For Boiler Pressure upto 17.5 kg/cm2)
4. Type of jobs executed by the firm earlier, with special reference to their Design pressure, temperature and
the materials involved, with documentary evidence
5. Wh h r h rm h v r ppr v y y l r ’ r r /I p r ? I , g v l
(b) Has your request for recognition as a repairer under Indian Boiler Regulations, 2026 been rejected by
any Authority?
If so, please give details
6. Whether having rectifier/generator, grinder, general tools and tackles, dye penetrant kit, expander and
measuring instruments or any other tools and tackles under regulation 316(4)(a).
7. Detailed list of technical personnel with designation, educational qualifications and relevant experience
(attach copies of documents) who are permanently employed with the firm
8. How many working sites can be handled by the firm simultaneously?
9. Whether the firm is prepared to execute the job strictly in conformity with the regulations and maintain a
high standard of work?
10. Whether the firm is prepared to accept full responsibility for the work done and is prepared to clarify any
controversial issue, if required?
11. Whether the firm is in a position to supply materials to required specification with proper test certificates
if asked for?
12. Whether the firm has an internal quality control system of their own? If so, give details1130 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
13. List of welders employed with copies of current certificate issued by a Competent Authority under the
Indian Boiler Regulations, 2026.
Date ………………… Name & Signature of the authorised signatory
Place ……………….. of the firm with stamp
Note 1: The recognition of the firm as a repairer shall be for a period of two years, thereafter they
shall apply for renewal of their recognition at least two months before the expiry of the said
period.
Note 2: In case the repairer is found violating the provisions of the Act or Regulations knowingly or
unknowingly, the firm shall be blacklisted under intimation to Chief Inspectors or Directors of
Boilers of all the States/Union territories and renewal shall not be done in any case.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1131
Form XIV:R01 Dated: xx.xx. 2026
FORM- XIV
[Regulation 322(3) ]
THE BOILERS ACT, 2025
Boiler Inspection Department
Steam Pipes and Connected Fittings
Identification Number
Memorandum of Inspection Book
_____________________________________________________________________________
MISCELLANEOUS
r ………………………………………………………………………………………………………………
Ow r ………………………………………………………………………………………………………………
r ……………………………………………………………………………………………………………
W rk F ry: …………………………………………………………………………………………………
Registration Number of Boilers to which the pipes and fittings, particulars of which are given in this
Memorandum are connected.
Remarks Date Particulars of additions & alterations
…………………… ……………………………………………………………………………………………
…………………… ……………………………………………………………………………………………
…………………… ……………………………………………………………………………………………
…………………… ……………………………………………………………………………………………
PLAN OF STEAM PIPES & THEIR CONNECTED FITTINGS1132 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
FEE AND APPROVAL TO PLAN RECORD
Drawing Total No. of Fee Date of No. & date of M.A.W.P. Temp Remarks &
No. length of Connected Payment approval of approval allowed initial of
Steam vessels Plan & Layout Kg/cm2(g) ºC Inspector
Pipes
STEAM PIPES—PARTICULARS AND DIMENSIONS
u ……………………………………………………………………………………………………………
Ry N l r ……………………………………………………………………………………
m p g y m lu ……………………………………………………………………………………
P p M r l ………………………………………… m r u ……………………………………
p Th k ……………………………………… M k ……………………………………………………
hm Fl g ……………………………………………………………………………………………
l w , T …………………………………………………………………………………………………
………………………………………………………………………………………………………………………
upp r ………………………………………………………………………………………………………………
Fl l y ……………………………………………………………………………………………………………
r g ……………………………………………………………………………………………………………
F p p …………………………………………………………………………………………………………
Outside Dia. …………………………………………… Th k ……………………………………………
M k …………………………………………………………………………………………………………………
M r ur ………………………………………… M T mp ……………………………………………
V l …………………………………………………………………………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1133
N …………………………………………………………………………………………………………………
Typ …………………………………………………………………………………………………………………
M mum ll w l w rk g pr ur …………………………………… M g T mp
…………………………………
I ll …………………………………………………………………………………………………
F r I p & …………………………………………………………………………………………
Ou ………………………………………………………………………………………………………………
F p Hy r ul T …………… kg/ m2 …………… y ……………… ………………………
R m rk ……………………………………………………………………………………………………………
CALCULATIONS
Steam Pipes : ………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
CALCULATIONS
Steam Pipes : ………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
CALCULATIONS
Steam Pipes: ………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………1134 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
………………………………………………………………………………………………………………………
CALCULATIONS
………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………… .
………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
INSPECTOR’S NOTE
………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1135
Form XV:R01 Dated: xx.xx. 2026
FORM-XV
[Regulation 358(3) ]
INSPECTING AUTHORITY’S CERTIFICATE OF INSPECTION UNDER CONSTRUCTION
W h r y r y h ……………… yp , ……………… m r, g ………………
sections and tubes h w ru r g pr ur ……………… kg/ m2(g).
M r ……………… u r ur up rv p v r u g ru y h
Competent Person and that the construction and workmanship were satisfactory and in accordance
with the standard conditions for the design and construction of Economiser laid down in Chapter-11
of the Indian Boiler Regulations, 2026.
Identification Mark on each section.
Branch Pipe on other pressure part.
Position of same.
The sections on compl w r u j w r pr ur ……………… kg/ m2(g) for
m u h pr h mp r ……………… r ly w h h
test in accordance with Regulation 361 .
Samples of the material used in the constructions of the Economiser were tested in the
presence of the Competent Person and were found to comply with the tests prescribed in Chapter-
11 of the Indian Boiler Regulations, 2026.
We have satisfied ourselves that the construction and dimensions of the Economiser are as
h w h M k r’ r w g N ……………… g y u h h p r ul r r h
m k r’ r m u ur F rm-XVI countersigned by us are correct to the best of our
knowledge and belief.
…………… h …………… y …………… ……
Name and Signature of Inspecting Authority1136 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form XVI:R01 Dated: xx.xx. 2026
FORM-XVI
[Regulation 358(4) ]
WORKS ADDRESS
Constructor’s Certificate of Manufacture and Test
1. Description Type of Economiser No. of tubes
No. of Sections kg/cm2(g)
Intended working pressure Total heating
Year of manufacture Surface of tubes
Description
2. Inspecting m r ru u r up rv ………………………………
Authority
hy r ul lly r ……… m u p r y ……
3. Construction and l r r w g N ………………………………
Workmanship All castings are well finished free from external defects, porous places and blow-holes
and true to dimensions without warping.
Where chapters are used, there is satisfactory fusion with the metal.
Chapters properly tinned with metal free from lead.
All screw threads are of Whitworth form.
All components parts are manufactured to limit gauges to secure interchangeability throughout.
4. Economisers and Parts Material Maker Competent Person’s
fittings Remarks
Particulars of Headers Tubes and/or
material used Pipes Valve Chest Bolt
THICKNESS OF PARTS AND TENSILE TEST—LIMIT
5. Part of Economiser Thickness in Tensile strength Elongation Gauge Brand and
32nds limits to tons limits to % Length No.
Headers
Tubes
Bolts[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1137
Certified that the particulars entered herein are correct and that the parts and fittings mentioned
.
above have been used in the construction and fittings of the Economiser
Th p r ul r h w g h v r u p r u r r w h h M k r’
certificates in our possession.
The design of the economiser in section and end view with principal parts fully dimensioned
is tha h w r w g N ………… Th m r h g ru mply
w h h I l r R gul r g pr ur ………… kg/ m2(g) at our Works above-
m h r ly w h w r ………… kg/cm2(g) r …………
m u ………… y ………… …… h pr ur …………r p l r pr v
whose signature is appended hereunder.
Signature of Engineer who witnessed the test Designation of
Maker
……… h ……… y ……… …… N m Signature of Inspecting
Authority
Note: Th r w g h m r M k r’ r m u ur h w g r ul r l
strength and elongation shall accompany this certificate and if the economiser has been built under the
supervision of an Inspecting Authority their certificate in Form-XV shall accompany.1138 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form XVII:R01 Dated: xx.xx. 2026
FORM-XVII
Counterfoil [Regulation 381(5) ]
No.
No.
Provisional Order under the Boilers Act, 2025
Name of the person or firm to which
——————————————————————————
Provisional Order is granted.
are hereby permitted to u h m r Ry N ………… …………
Description of Economiser
m r R g ………… m y ………… r g M k r’ N
M k r’ N ………… g pr ur ………… kg/ m2(g) /maximum
Rating mp r ur ………… ° p g h u r r u l r
Pressure permitted within six months from the date thereof after which period this order
will become void.
Period
……… h ……… y ……… ……
Date
Inspector
Inspector[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1139
Form XVIII:R01 Dated: xx.xx. 2026
FORM-XVIII
(Regulation 385 )
BOILERS INSPECTION
DEPARTMENT
ECONOMISERS
REGISTRY NUMBER
__________________________________________________________________________________
__
MEMORANDUM OF INSPECTION
OR
REGISTRATION BOOK
MISCELLANEOUS
r ………………………………………………………
Ow r ………………………………………………………
r F ry …………………………………………
N r R lw y ……………………………………1140 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
m r R g r ………………………………… ………………………………………………
R g r k N ………………………………………… g …………………………………………
R g ry Num r …………………………………………… V r ……………………………………
g r ur ………………… Kg/cm2(g)………………………………………………
m r R g ………………………………………… I p …………………………………
R g r k ll ………………………………… ………………………………………………
R m rk r r …………………………………
…………………………………………………
PROVISIONAL ORDER AND CERTIFICATE RECORD
Fee Date of Date of Certificate Period of Design Economiser Remarks and
payment Inspection No. and Certificate pressure Rating Inspector’s initial
Date
Typ m r ………………………………………
M k r …………………………………………………………
I W rk g r ur ………………………………
l y r m k ……………………………………
M k r’ N …………………………………………………
r p m r …………………………………
No. of tubes ………………………………………………… l g h …………………… ………………
Th k ……………………………………………………
I r l m …………………………………………
N H r ………………………………………………
Th k H r ………………………………………
g h T p r h p ……………………………… Th k ……………………………………
g h m r h p …………………………… Th k ……………………………………
Dimensions p p g ………………………………
m r p l ………………………………………
MOUNTINGS
No. Diameter Type Position Material[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1141
R l V lv …………………………………………………
p V lv …………………………………………………
l w w …………………………………………………
Th rm m r ………………………………………………
r ur G ug ……………………………………………
l F g ……………………………………………
MAKER’S CERTIFICATE
Name of Maker ……………………………………………………………………
M k r’ Hy r ul T r ur ……………………………………………………………………
M k r’ r w g N ……………………………………………………………………
Name of Inspecting Authority ……………………………………………………………………
Name of Maker of Material ……………………………………………………………………
Tubes
…………………………………………………
Process Headers …………………………………………………
Bolts
…………………………………………………
Test Results
Tubes T E
Headers T E
Pipes T E
Bolts T
% Sulphur
% Phosphorus
M k r’ I M rk
Position1142 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CALCULATIONS
HEADERS
TUBES
BRANCH PIPES
BOLTS
HEATING SURFACE
T l H g ur ………………………………………
m r R g ………………………………………
l ul m y ……………………………………… u m …………………………………
l ul h k y …………………………………… ………………………………………………
M mum ll w l w rk g pr ur ………………… Kg/cm2(g) ……………………………………………
h I p r’ r m rk g ur …………………
INSPECTOR’S NOTES[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1143
Form XIX:R01 Dated: xx.xx. 2026
FORM-XIX
(Regulation 387)
CERTIFICATE FOR USE OF AN ECONOMISER
Registry Number of Economiser Type
No. of tubes
Number of Headers
Economiser Rating Place and year of manufacture
Name of owner
Situation of Economiser
Repairs
Remarks
.
Hydraulically tested on to kg/cm2(g)
I hereby certify that the above described Economiser is permitted by me/Chief Inspector under the provisions of
Section 12/1 h l r , w rk m mum pr ur ……………kg/ m2(g) /maximum temperature
°F r h p r r m …………… ……………
Th l g h y r l v lv , …………… kg/ m2(g).
F R …………… p ……………
……………
Th ………… y ………… ……,
Name and signature of
Competent Person1144 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CONDITIONS
(REVERSE OF FORM XIX)
(1) No structural alteration, addition or renewal shall be made to the Economiser without a written
permission from the Chief Inspector.
(2) This certificate shall cease to be in force—
(a) on the expiry of the period for which it was granted, or
(b) when any accident occurs to the Economiser, or
(c) when any structural alteration, addition or renewal is made in or to the Economiser, or
(d) save as provided in section 17 of the Act, when any structural alteration, addition or renewal is made
in or to the Economiser; or
(e) on the communication to the owner of the Economiser of an order of the Chief Inspector or Inspector
prohibiting its use on the ground that it is in a dangerous condition.
(3) The Economiser shall not be used at a pressure greater than the pressure/temperature entered in the
certificate as Maximum allowable working pressure /temperature not with the relief valve set to
pressure/temperature exceeding such Maximum allowable working pressure /temperature.
(4) The Economiser shall not be used otherwise than in a condition which the owner reasonably believes to
be compatible with safe working.
N.B.: l r g r g h m r r r r R g r k N ………… wh h py m y
obtained on payment on application to the Chief Inspector.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1145
Form XX:R00 Dated: xx.xx. 2026
FORM-XX
Qualified Boiler Welder’s Certification Continuity Form
(as per Regulations517 and 527(3), to be submitted along with renewal request)
Issuedunder
THE INDIAN BOILER REGULATIONS, 2026
Name of the welder :
F h r’ N m :
Date of Birth :
Organisation Name & Address :
IBR qualification certificate No : Validity:
Qualified In : Carbon Steel - Plate / Pipe & Tube (M number grouping)
Alloy Steel - Plate / Pipe & Tube (M number grouping)
Process:
Consumable U number:
Continuity details (through a sample detail for reference) :
a. On completion of 6 months
a. Welded Part Name:
b. Date :
b. On completion of 12 months
a. Welded Joint Name:
b. Date :
c. On completion of 18 months
a. Welded Part Name:
b. Date :1146 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
d. On completion of 24 months
a. Welded Part Name:
b. Date :
Submitted by
Signature and Seal of the employer with date
Certificate extended up to ______________ Approved by
(Name and Signature of Competent Authority)
Date & Seal[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1147
Form XXI:R01 Dated: xx.xx2026
FORM-XXI
(Regulation 540)
Record of Welder’s Qualifications/Requalification Tests (Indian Boiler Regulations, 2026)
l T ………………
……………………… ..
N m W l r ……………………………………………………………………………………………………
F h r’ m ………………………………………………………………………………………………………
r h ………………………………………………………………………………………………………
r ……………………………………………………………………………………………………………
………………………………………………………………………………………………………………………
rv p r G / l r r ……………………………… y r ……………………………
g ur W l r ……………………………………………………… ………………………………………
N m r h rm wh r r ……………………………………………………………
………………………………………………………………………………………………………………………
T …………………………………………………………………………………… l , p p , u
G l r / ………………………………………………… ………………………………………
……………………………………… ……………………………………… Gr v /F ll / r h
……………………………………………………………………………………………………………
Th k m r l u ………………………………………………………………………………………
m r h k p p , r h r u u ………………………………………………………1148 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Qu l y m r l l r r ll r r ……………………………………………………………
RESULTS OF OBSERVATIONS
Marks
Maximum Awarded
A. Procedure
1. Preparation of specimen 3
2. Size & Grade of electrode or filler rod 2
3. Number of runs and manipulation of control 5
B. Visual Inspection
4. Root penetration 10
5. Freedom from undercut 5
6. Disposition of runs 2
7. Uniformity of surface 1
8. Shape of profile 1
9. Smoothness of joints 2
10. Freedom from cavities & slags 5
11. Dimensions of weld deposit 1
12. Quality of weld metal (Overheating, surface cracks, spongy surface etc.) 3
C. Physical Test
13. Face bend test 10
14. Root bend test 20
D. Etch Test
15. Disposition of runs 2
16. Degree of fusion 5
17. Root Penetration 11
18. Slags inclusions and porosity 5
E. Fractured Surface
19. Quality of weld metal (Excessive oxidation, carburisation, overheating, 7
roughness, porosity, appearance).
100[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1149
Name and Signature of Competent Authority
O rv r gr ph m u ……………………………………………………
M rk w r ………………………………………………………………………………………………… %
R ul Or l r Wr m …………………………………………………………………………
M rk w r ………………………………………………………………………………………………… %
GENERAL REMARKS OF COM T NT UTHORITY ………………………………………………………
TYPE AND CLASS OF WELDING QUALIFI …………………………… in Gas or Electric Arc welding.
PERIOD OF VALIDITY OF RTIFI T ……………………………… Fr m …………… T ……………
Place ……………
Date ……………. Name and signature of Competent Authority1150 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form XXII:R01 Dated: xx.xx. 2026
FORM-XXII
CERTIFICATE OF MANUFACTURE AND TEST FOR SMALL INDUSTRIAL BOILERS
(Regulation 555(2))
M k r’ N m ……………………… Y r M k ……………………………………………………
M u ur r …………………………………………………………………………………………
I ll ……………………………………………………………………………………
l r I …………………………… mp r ’ mp …………………………
r w g N …………………………………… l r N …………………………………………
6. Design pressure (kg/Cm2(g) …………………………
7. Size of Boiler
Length (Meters) Width (Meters) Height (Meters) Diameter (Meters)
8. Material Specification (As applicable)
CHEMICAL COMPOSITION MECHANICAL PROPERTIES
C Si Mn P S Y S U.T.S. % EL.
h ll ………………………………………………………………………………………………………………
Fur …………………………………………………………………………………………………………
Tu l ………………………………………………………………………………………………………
Fl g ……………………………………………………………………………………………………………
l r Tu / p / l ………………………………………………………………………
Diameter Thickness Material CHEMICAL COMPOSITION MECHANICAL PROPERTIES
Specification
C Si Mn P S Y S U.T.S. % EL.
Tu ……………………………………………………………………………………………………………
p …………………………………………………………………………………………………………
……………………………………………………………………………………………………………[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1151
9. Volumetric Capacity
10. Heating Surface (Sq. Metres)
11. Nozzle connection
(a) m Ou l ……………………………………………………………………………
(No. Size and Type of Nozzles)
(b) y V lv ……………………………………………………………………………
(No. Size and Type of Nozzles)
(c) u l ry r v …………………………………………………………………
(No. Size and Type of Nozzles)
(d) l w V lv ……………………………………………………………………………
(No. Size and Type of Nozzles)
(e) F V lv ……………………………………………………………………………
(No. Size and Type of Nozzles)
12. Shop Hydro Test Pressure (Kg. Cm2 ……………………… …………………………………
Name and Signature of Manufacturer
We certify that the above boiler constructed under our supervision and inspected at various stages
of construction by the Competent Person and that the construction, workmanship were satisfactory
as per Indian Boiler Regulations, 2026.
Name and Signature Competent Person Name and Signature of Inspecting Authority
………… h ………… y ………… ……1152 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Form XXIII:R00 Dated: xx.xx. 2026
FORM-XXIII
CERTIFICATE OF MANUFACTURE AND TEST FOR SMALL SOLAR BOILERS
[Regulation 596(3)]
M k r’ N m ……………………… Y r M k ……………………………………………………
M u ur r …………………………………………………………………………………………
I ll ……………………………………………………………………………………
l r I …………………………… mp r ’ mp …………………………
r w g N …………………………………… l r N …………………………………………
6. Design pressure (kg/cm2 g …………………………
H g ur q M r ………………………
8. Material Specification (As applicable)
9 V lum r p y l r …………………
10. Safety Valve N ……………… z …………………
11. Hydro Test Pressure (Kg/cm2 g ……………………… …………………………………
Manufacturer
(Name, Signature & Stamp)
We certify that the above boiler was constructed under our supervision and inspected at various
stages of construction as specified in chapter-17 by the Competent Person and that the construction,
workmanship were satisfactory as per Indian Boiler Regulations, 2026.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1153
Competent Person Inspecting Authority
(Name, Signature & Stamp) (Name, Signature & Stamp)
………… h ………… y ………… ……1154 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
APPENDIX-A
INSPECTION AND TESTING OF BOILERS, BOILER COMPONENTS
AND OTHER PARTS DURING MANUFACTURE
GENERAL
The Inspecting Authority/Competent Person shall have access to the works of the
manufacturer at all reasonable times and shall inspect the manufacture of the boiler at least
at the following stages and may reject any part that does not comply with the requirements
of the Indian Boiler Regulations, 2026. In case of any doubt, the Inspecting
Authority/Competent Person may examine at any stage other than the stages stipulated
below. The manufacturer shall give at least 4 working days‘ notice to the Inspecting
Authority/Competent Person before reaching each stage. Before undertaking any of the
stage inspections, the Inspecting Authority/Competent Person shall satisfy himself that the
testing equipment/instrument has been properly calibrated.
STAGES OF INSPECTION
Each boiler shall be inspected during manufacture by a Competent Person nominated by the
Inspecting Authority. Sufficient inspections shall be made to ensure that the materials,
manufacturing and testing conform to the requirements of these regulations.
Stages of Inspection During Manufacture
A. Shell Type Boilers
(a) (i) When the materials are ready for identification with the relevant material test
certificates at boiler maker‘s works;
(ii) In laying out and cutting the plates, the plate identification mark shall be located so as to
be clearly visible after the boiler part is completed. If the plate‘s identification mark is
unavoidably cut out, it shall be transferred by the manufacturer to another part of the
component to the satisfaction of the Inspecting Authority/Competent Person;
(iii) The Inspecting Authority/Competent Person shall identify weld test plate material if
production weld tests are required;
(b) When the Shell plate and end plates have been formed with plate edges prepared for
welding and test plates are attached;
(c) When the welding of main cylindrical shell is completed and checked for circularity;
(d) To examine radiographs and/or reports of non-destructive testing;
(e) When openings have been prepared and stand pipes and similar connections including
end plates have been tackwelded in position and subsequently on completion;[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1155
(f) When welding of drum or shell is completed and to check the records of heat-treatment
when heat treatment is required under these regulations;
(g) When weld test specimens have been prepared from the test plate, previously selected
to witness the required testing;
(h) During hydraulic test, followed by external and internal examination and stamping.
B. Water Tube Boilers
(I) Welded drums, headers, separators and vessels
(a) (i) When the materials are ready for identification with the relevant material test
certificates at boiler maker‘s works;
(ii) In laying out and cutting the plates, the plate identification mark shall be located so as to
be clearly visible after the boiler part is completed. If the plate‘s identification mark is
unavoidably cut out, it shall be transferred by the manufacturer to another part of the
component to the satisfaction of the Inspecting Authority/Competent Person;
(iii) The Inspecting Authority/Competent Person shall identify weld test plate material
ifproduction weld tests are required;
(b) When the plates are formed to cylindrical shape with the edges prepared for welding and
set up in readiness for commencement of welding and attachment of test plates;
(c) When the welding of the main cylindrical shell is completed, the shell checked for
circularity and the radiographic or ultrasonic test reports, records are available for scrutiny;
(d) When the end plates are ready for identification with the mill certificate, formed to shape
with weld edges prepared and set on to the cylindrical shell in readiness for the
circumferential welding operation;
(e) When the welding of the end plates to the drum or the header is complete and the
radiographs or ultrasonic examination records are available for scrutiny;
(f) When each drum or header is prepared to receive any compensation plates and
attachments, and when at least 10% of each type of branch of tube stub is set up ready for
welding;
(g) When all welding on each drum or header is complete, the Inspecting
Authority/Competent Person will check the records of heat treatment, and mark off of
specimens for preparation and testing from test plates;
(h) During non-destructive examination, after stress relieving, on alloy steel drums and
carbon steel drums with carbon content exceeding 0.25 % or thickness more than 100 mm;
(i) During hydraulic test followed by final examination and stamping.
(II) Seamless drums, headers, separators and vessels1156 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(a) When materials are ready for identification with the relevant material test certificates, also
when each cylinder is prepared for forming, or welding of separate end closures and to
identify test plate material;
(b) When the end plates are ready for identification with the mill certificate, formed to shape
with weld edges prepared and set on to the cylindrical shell in readiness for the
circumferential welding operation;
(c) When the welding of the end plates to the drum or the header is complete and the
radiographs or ultrasonic examination records are available for scrutiny;
(d) When each drum or header is prepared to receive any compensation plates and
attachments, and when at least 10% of each type of branch of tube stub is set up ready for
welding;
(e) When all welding on each drum or header is complete, the Inspecting Authority will check
the records of heat treatment, and mark off of specimens for preparation and testing from
test plates;
(f) During non-destructive examination, after stress relieving, on alloy steel drums and
carbon steel drums with carbon content exceeding 0.25 % or thickness more than 100 mm;
(g) During hydraulic test followed by final examination and stamping.
C. Tubular and piping components
(a) When the tubes or pipes are ready for identification with the relevant material test
certificates at the boiler makers‘ works;
(b) When all welding of tubes or pipes and their attachments are complete and the non-
destructive examination and stress relieving report/records are available for scrutiny;
(c) During hydraulic test followed by final examination and stamping.
D. Inspections and tests to be carried out at Steel Makers’ Works Foundry/Forging
Units and the pipe and tube makers’ works by the Inspecting Authority/Competent
Person:
(I) Steel Makers Works
(a) For manufacture of the billets, ingots, slabs, blooms, plates, bars, concast bars or any
other material to be used in the construction of the boilers:
(i) Checking of the chemistry of steel as per regulations;
(ii) When ready for non-destructive examination and selection of mechanical test
specimenafter heat treatment;
(iii) Testing, final examination and stamping.
Note:Notwithstanding anything specified above where the steel is made by the Well-known
Steel Maker as recognised under the Indian Boiler Regulationsby the Central BoilersBoard,
these tests will be carried out and certified by the Steel Makers themselves and therecords
maintained.
(II) Pipe and Tube Makers[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1157
(i) Identification of materials with relevant material test certificates;
(ii) When ready for non-destructive examination and selection of mechanical test specimens
after heat treatment;
(iii) When specimen is tested and pipes/tubes are ready for hydraulic tests.
(iv) Final inspection and stamping
Note :Notwithstanding anything specified above, when the pipes/tubes are manufactured by
well-known pipes/tubes makers recognised under the Indian Boiler Regulationsby theCentral
Boilers Board, all the above stages of inspections shall be carried out and certified bythe
manufacturers of pipes and tubes themselves and records maintained.
(III) Forging Units:
(i) Checking of the chemistry of steel as per regulations;
(ii) When ready for non-destructive examination and selection of mechanical test specimen
afterheat treatment;
(iii) Testing, final examination and stamping.
Note: Notwithstanding anything specified above, when the forgings are made by well-
knownforging units as recognised under the Indian Boiler Regulationsby the Central
BoilersBoard then tests will be carried out and certified by the Forges themselves and all
records aremaintained properly.
(IV) Foundry Units:
(i) Checking of the chemistry of molten metal;
(ii) Verification of heat number and stamping of test bars;
(iii) Verification of non-destructive examination report and heat treatment
reports/records,mechanical testing, final examination & stamping.
Note: Notwithstanding anything specified above, when the castings are made by well-
knownfoundry units as recognised under the Indian Boiler Regulations by the Central
BoilersBoard then tests will be carried out and certified by the Foundries themselves and all
recordsare maintained properly.
E. Valves and Mountings
(a) Identification of materials with the relevant material test certificates;
(b) Hydraulic test and stamping.1158 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
APPENDIX-B
TRANSVERSE RUPTURE STRESS (MODULUS OF RUPTURE)
The transverse strength of cast iron may be expressed by a figure shown as the
Transverse Rupture Stress; this figure is obtained by dividing the maximum bending moment
at failure by the modulus of the section. Thus, the Transverse Rupture Stress is the
maximum stress which would have existed if the material had behaved in accordance with
the assumptions made in the ordinary theory of bending, and in that event it would be
independent of the size and shape of the section. Bars fractured in transverse, however, are
stressed beyond the elastic limit, and under these conditions the theory of bending no longer
holds good. Furthermore, the influence of rate of cooling in cast metals is such that the
Transverse Rupture Stress of a Thick Bar is less than that of a thinner bar of the same
metal. The Transverse Rupture Stress, therefore, is not strictly independent of the size and
metal. The Transverse Rupture Stress, therefore, is not strictly independent of the size and
shape, of the section, but nevertheless forces a convenient way of expressing the result of
transverse tests without the necessity for giving full details of bar dimensions. The formula
required is obtained as follows:
A bar supported at both ends and centrally loaded with a load ‗W‘ is subject to a
bending Moment WL/4, ‗L‘ being the distance between supports. The resistance offered by
the bar may be expressed as fZ, ‗f‘ being the stress and ‗Z‘ the modulus of the section. At
fracture, ‗f‘ becomes the breaking stress of Transverse Rupture Stress, and WL/4 = fZ,
where f = (LW)/ (4Z). If ‗W‘ is in tons and ‗L‘ in inches, ‗f‘ is in tons per square inch. For a
round bar, Z = 0.0982d2, where d diameter in inches.
Since for a standard round bar ‗L‘ and ‗Z‘ are constant, the value WL/4Z is fixed and
hence the Transverse Rupture Stress f = KW, where ‗K‘ is a constant.
The factor ‗K‘ for converting actual breaking loads into Transverse Rupture Stress
are given in the following tables both for the Standard test bars and the test bars varying
within the limits of regulation 65. In the same table are given factors for converting actual
breaking loads into equivalent breaking loads on the bars of Standard diameter.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1159
Factors X for converting Actual Breaking Loads into Equivalent Breaking Loads on
Bars of Standard Diameter.
(Equivalent Breaking Load on Bar of Standard Diameter = X x Actual Breaking Load).
And
Factors K for converting Actual Breaking Loads into Transverse Rupture Stresses.
(Transverse Rupture Stress in tons per sq.in. = K x Actual Breaking Load in lbs.)1160 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
APPENDIX- C
(See regulation 75)
(1) Parent metal for test plates: The parent metal used in preparing test pieces and test
specimen shall be equivalent matching mild steel / nonferrous material as per the relevant
AWS or SFA Specification. A matching material shall be used with buttering with a
minimum of 3 mm thickness on groove faces & on backing plate. The thickness and other
dimensions shall be as per the relevant AWS or SFA Specification.
(2) All-weld metal test: Method of preparation of test pieces. The temperature of the parent
metal shall be between 10°-38°C minimum immediately before deposition the first run of
weld metal. Preheat and interpass temperature shall be as applicable to the relevant AWS
or SFA Specification. The test specimen shall not be subjected to any mechanical or thermal
treatment other than the required AWS or SFA Specification. All-weld test pieces shall be
prepared as per the applicable AWS or SFA Specification.
Fig. 2/2: Method of Preparation of All-Weld Metal Test Specimen
The assembly shall be welded together with these plates pre-set so that the gap at
the top between the chamfered edges of the plates is 25 mm and the plates may be
approximately level when the butt-weld is completed.
The weld metal shall be deposited in single or multi-run layers and the direction of
deposition of each layer shall be alternatively from each end of the specimen. Each run of
weld metal shall not be less than 1.5 mm and not more than 3 mm thick. The time interval
between the completion of one run and the commencement of deposition of the succeeding
run shall be not less than 5 minutes. The assembly shall not be quenched between the
deposition of individual runs. The welding current used shall be within the appropriate range
given by the manufacturer. The welding position for the assembly shall be flat, unless this is[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1161
contrary to the recommended position for the electrode, in which case the position of weld
shall be as recommended by the manufacturer.
On completion of the weld the specimen shall be allowed to cool in still air. The
portion including the weld shall then be removed by cutting away the excess plates at the
places indicated in Fig. 2/2.
The all weld test piece shall be heat-treated by raising to a uniform temperature and
maintained at that temperature as per the relevant AWS or SFA specification of electrodes.
The test plate shall be allowed to cool slowly outside the furnace, from 300°C onwards
protected from draughts and chilling. Rate of heating and cooling shall be as per the relevant
AWS or SFA Specification. A tensile test specimen shall be machined from the test piece to
the dimension given in Fig. 2/3 taking care that the longitudinal axis of the specimen
coincides with the center line of the weld and the mid-thickness of the plate as indicated in
Fig. 2/2. The specimen then shall be tested for tensile strength.
Fig. 2/3: TENSILE TEST SPECIMEN
(3) Impact test specimen
The charpy test specimen shall be machined from the weld metal test pieces to
the dimensions as per the relevant AWS or SFA Specification. The test specimens shall
be taken for test from the all weld test plate assembly.
Fig. 2/4: IMPACT TEST SPECIMEN
(4) Transverse tensile and bend tests1162 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
The transverse tensile and bend test pieces shall be made as shown in Fig. 2/5
by butt-welding together two 12 mm plates of suitable length and not less than 150 mm
in width. The plate edges shall be prepared to form a single Vee joint the details of which
shall be a follows:
Fig. 2/5: METHOD OF MAKING TRANSVERSE TENSILE AND BEND TEST SPECIMENS
Fig. 2/6: GROOVING IN PREPARATION FOR DEPOSITION OF BACKING RUN
(See Fig. 2/6)
Angle between fusion faces 60°-70°
Root face 3.2 mm.
Maximum gap 3.2 mm.
The plate edges shall be prepared as per Fig. 2/6, and pre-set to allow for slight
distortion after welding.
The welding procedure in making out the test pieces shall be according to the
position of welding as in Table 2/38 below:
Table 2/38: Welding procedure for preparation of transverse tensile test and bend test
piece
Welding position for test pieces (all angles ≠ 5°) Welding Procedure
shown in Table 2/39 below
(1) (2)
FLAT 1. All runs made with 4 mm electrodes.
Weld slope 0°
Weld rotation 0° 2. First run – 5mm. electrodes. Subsequent[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1163
runs 6.3 mm diameter electrodes (or largest size
manufactured).
INCLINED
Weld slope 30° First – 4 mm electrodes.
Weld rotation 45° Subsequent runs – 4./5.0 mm electrodes
HORIZONAL VERTICAL
Weld slope 0° First run – 4 mm electrodes.
Weld rotation 90° Subsequent runs – 4 /5 mm electrodes
VERTICAL
Weld slope 90° All runs made with 4 mm electrodes.
OVER HEAD
Weld slope 0° All runs made with 4 mm electrodes.
Weld rotation 180°
In all cases a backing run shall be made with 4 mm. electrodes in the welding
position applicable to the test piece, after cutting out a groove of 3 mm deep if considered
necessary, as in Fig. 2/6.
The test pieces for the inclined and vertical positions shall be welded using the
‗upwards‘ methods unless the electrodes manufacturer especially recommends that only the
‗downwards‘ method shall be used, if both methods are recommended, test pieces welded
by each method shall be made. After welding, the test pieces shall be cut by sawing on
machining to form one face-bend and one root-bend test specimen, as indicated in Fig. 2/5.
(5) Transverse tensile test
Transverse tensile tests specimens shall conform to the dimensions given in Fig. 2/7.
The upper and lower surfaces of the weld shall be filed, ground or machined level with
the respective original surfaces of the plates. Where the plates are not level with each
other the metal many be cut away to bring them approximately level, provided that the
thickness of the plate is not reduced by more than a total of 1 mm.
The test specimens shall then be tested for tensile test as in Appendix-D.
(6) Transverse bend test
The bend test specimens shall be 38 mm in width. The upper and lower surfaces of
the weld shall be filled, ground or machined level with the respective original surfaces of
the plates, with the proviso as in item (6) above. The tool marks should be avoided as
they lead to location of stress and may cause premature failure. For this reason the
direction of machining of the surfaces should be along the specimens and transverse to
the weld. The sharp corners of the test specimens shall be rounded to a radius not
exceeding 1.3 mm.
The test specimens shall be bent through an angle of 180° over a former having a
diameter equal to three times the thickness of the specimen, as shown in Fig. 2/8. One1164 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
test specimen shall be tested with the face of the weld in tension and one with the root of
the weld in tension.
Fig. 2/8: Method of Carrying Out Bend
Fig. 2/7: Dimensions of Transverse Tensile
Tests
Test Specimen
DEFINITION OF WELDING TERMS, CLASSIFICATION OF COVERED ELECTRODES,
DEFINITIONS & PRINCIPLES – DEFINITIONS
Weld Slope: The slope of a weld is the angle formed between the line of weld root and a
horizontal reference plane placed below the lowest portion of the weld. (See Fig. 2/9)
Fig. 2/9: Figure to Illustrate Weld Slope
Weld Rotation: The rotation of weld is the angle formed between the upper portion of vertical
reference plane which passes through the line of the weld root and a line drawn from the line of the
weld root which intersects the weld surface at a right angle and a point equidistant from either edge of
the weld (see Fig. 2/10)
Note: Example of the slope & rotation of various welds are given in Fig. 2/11.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1165
Fig. 2/10: Figures to Illustrate Weld Rotation
Fig. 2/11: Examples of ‘Slope’ and ‘Rotation’1166 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Fig. 2/12: Flat (F)
TABLE 2/39
ELDING POSITIONS: WELDING POSITIONS ARE DEFINED AS FOLLOWS
POSITIONS SLOPE ROTATION SYMBOL ILLUTRATION
(1) (2) (3) (4) (5)
FLAT NOT EXCEEDING 10° NOT EXCEEDING 10° F Fig. 2/12
INCLINED EXCEEDING 10°NOT NOT EXCEEDING 90° I Fig. 2/13
EXCEDING 45°
HORIZONTAL NOT EXCEEDING 10° EXCEEDING 10°NOT H Fig. 2/14
VERTICAL EXCEEDING 00°
VERTICAL EXCEEDING 45° ANY V Fig. 2/15
OVERHEAD NOT EXCEEDING 45° EXCEEDING 90° O Fig. 2/16
NOTE: The five positions defined above cover any possible combination of slope and rotation so that
every weld can be classified in one of these positions.
The table above is for Fig. 2/12.
Fig. 2/13: Inclined (I)
Fig. 2/14: Horizontal – Vertical (H)
Fig. 2/15: Vertical (V) Fig. 2/16: Overhead (U)[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1167
APPENDIX-D
FORMS OF STANDARD TENSILE TEST PIECES
STANDARD FLAT TEST PIECES
TEST PIECE A
1. Chief for sheets, plates, strips, flat bars, sections, etc.
FIG. 1
(i) (ii) (iii) (iv)
Nominal thickness of (See note 3) 9.5 mm and
test piece thicker
Up to but not including 9.5 mm
mm mm mm mm
Width W 12.7 25.4 38.1 (max.) 38.1 (max.)
Gauge Length L 50.8 101.6 203.2 203.2
Parallel Length P 63.5 114.3 228.6 228.6
Radius as shoulder 25.4 25.4 25.4 25.4
(Minimum) R
Approximate total 203.2 304.8 457.2 457.2
length
When the width of the material to be tested is insufficient to permit of the preparation
of the standard tensile test pieces, a piece of the full width of the material may be used.
Notes:
(1) For some material it is convenient to use straight parallel test pieces.
(2) For certain non-ferrous metals it is sometimes convenient to use the standard test pieces
that has a width of 12.7 mm and a gauge length of 50.8 mm for thickness exceeding 6.3
mm.
(3) A test piece of the dimensions given in Col. (iii) for material under 6.3 mm nominal thickness
is intended for the ferrous metals only.1168 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
TEST PIECE A-1
2. In Tensile tests on special sheet and strip materials (e.g. steel used for deep
pressing operations) the following alternative test piece may be used: -
FIG. 2
STANDARD ROUND TEST PIECES
TEST PIECE B
3. Chiefly for un-machined rods and bars not exceeding 25.4 mm diameter (excluding
cast metals).
Gauge Length G = 203.2 Length between grips P to be not less than 9D
FIG. 3
All test pieces of form B are strictly similar and for the same material give the same
percentage elongation. They give elongation figures nearly the same as those of standard
flat test pieces 203.2 mm in gauge length 38.1 mm wide and 12.7 mm thick.
Note: When tensile tests are made on unmachined square and hexagonal bars excluding
cast metals the gauge length shall be 8 times the distance between the flats and the length
between the grips shall be not less than 9 times the distance between the flats.
4. For rods and bars over 25.4 mm diameter (excluding cast metals).[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1169
Gauge Length G = 4D; Length between grips P to be not less than 4.5D
FIG. 4
5. Machined Round Test, Piece for general purposes.
FIG. 5
Gauge Length G = 50.8 mm; Parallel length P to be not less than 57.2 mm.
Diameter D = 14.3 mm; Cross-sectional area A = 161.3 mm2
Radius at shoulder = 12.7 mm minimum for wrought metals and 63.5 mm minimum
for cast metals.
6. Machined Test Pieces for general purposes (excluding cast iron).
FIG. 6
Cross-section Area A = D2π
-----
4
Gauge length G = 4√A = 3.54D
Parallel length P = 9/8 G minimum = 3.98D minimum
Radius at shoulder for wrought metals = G/4 minimum (0.88 D minimum).
Radius at shoulder for cast metals = G/4 minimum (4.40 D minimum).
All test pieces conforming to the above dimensions are similar to Standard Test
Piece C with corresponding shoulder radius, and give the same percentage elongation as
Test Piece for the same material.1170 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Recommended dimensions for Subsidiary Standard Round Test Pieces are tabulated
below. Standard Test Piece C (14.3 mm diameter) is included for comparison. Any test
piece, however, in which the diameter is not less than 3.2 mm, and the dimensions of which
conform to the subsidiary standard form, is recognized as a subsidiary standard test piece.
Diameter ‗D‘ Cross- Gauge Length Parallel Radius at Shoulder ‗R‘
sectional Area ‗G‘ Length ‗P‘
‗A‘ (minimum) Wrought Cast Metal
Metal
mm mm2 mm mm mm mm
(2) (3) (4) (5) (6)
(1)
28.65 645.2 101.6 114.3 25.4 127
24.8 483.8 87.9 98.8 21.8 109.2
20.3 322.6 71.6 80.8 17.8 88.9
14.3 161.3 50.8 57.2 12.7 63.5
10.8 91.1 38.1 42.9 9.4 47
10.1 80.6 35.8 40.1 8.9 44.4
9 64.5 32 36 7.8 39.3
7.2 40.3 25.4 28.4 6.3 31.2
5.7 25.8 20.3 22.9 5 25.4
4 12.9 14.2 16 3.6 17.8
3.2 7.9 11.2 12.7 2.8 14
APPENDIX-E
PROOF TEST FOR CREEP QUALITY OF CARBON STEEL
BOILERQUALITY PLATE– SPECIFICATION
NATURE OF TEST
1. The test shall consist of a tensile creep test carried out over a period of at least 48
hours at a temperature of 450°C and with stress of 11.25 kg/mm2. Under these
conditions the slope of the chord to the creep curve between the 24th and 48th hour
shall not exceed 50 x 10 = 4° strain per hour.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1171
CONDITION OF MATERIAL
2. The test shall be made on the material in the normalized condition. The normalizing
temperature shall be between 875°C – 925°C, and the plate sample shall be
maintained at the normalizing temperature for one hour per inch of thickness and
cooled freely in still air.
TEMPERATURE OF TEST
3. (a) Temperature Measurement – The temperature of the
specimen shall be measured by thermocouples suitable for the temperature
specified. Two thermocouples situated one at each end of the gauge length
shall be used in the case of test pieces having gauge lengths upto 51 mm,
and for longer gauge lengths and additional thermocouple situated at the
middle of the gauge length shall be used.
Thermocouples shall make good thermal contact with the test piece and the
protected from the direct heat of the furnace of being covered with asbestos
tape or equivalent insulation.
The cold junction shall be maintained at a known temperature which shall be
registered by a mercury thermometer. Alternatively, a suitable means shall be
provided for correcting automatically errors in reading due to changes in
temperature of the cold junction.
(b) Temperature Control – The two (or three) thermocouples specified in clause
(a) shall agree with one another within 3°C and the average of these readings
shall be taken as the test temperature which shall not vary from 450°C by
more than ± 2°C throughout the test.
Either a continuous record of sufficient readings of the temperature shall be
made to indicate that the temperature conditions have been satisfactory.
(c) Heating period before loading – The specimen shall be maintained at the
specified temperature for at least an hour prior to the application of the load.
STRESS
4. The load required to produce the specified stress shall be gradually applied without
shock during a period not exceeding five minutes and the stress shall be accurate to
± 2 ½ percent.
SENSITIVITY OF STRAIN-MEASUREING EQUIPMENT
5. The sensitivity of the extensometer must be such that strains can be measured to the
nearest 0.00002.1172 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
READINGS
6. A sufficient number of strain readings shall be taken clearly to define the creep curve
upto 48 hours, and the chord slope shall be measured from a chord drawn between
points on the curve at the 24th and 48th hours.
REPEAT TEST
7. If the materials fail to pass the test, but the chord slope does not exceed 60 x 10 = 6°
strain per hour, a retest may be made at the request of the manufacturer and shall be
accepted if satisfactory, or at the Competent Person discretion a pass test at a stress
5 percent less than that specified may be accepted.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1173
APPENDIX-F
FLANGES FOR PIPES, VALVES AND FITTINGS
Table A: For Working Steam Pressures above 50 lbs. and upto 100 lbs. per square inch.
Nominal Dia- Dia- Number and Thickness of Flange
Intl. Dia.
meter of meter of Diameter of Cost Cast Steel and Stamped or Forged, Wrought
of Pipe
Flange Bolt Bolts (off Centre Iron Bronze Iron or Steel
Circle lines) (See Nos.)
Upto Upto Upto Upto Upto Upto Upto Upto Upto
50 lb. 50 lb. 50 lb. 100 lb. 50 lb. 50 lb. 100 lb. 50 lb. 100 lb.
100 lb. 100 lb. 100 lb.
in. in. in. in. in. in. in. in. in. in.
½ 3¾ 2-5/58 4½ 4½ 3/8 3/8 3/8 3/16 ¼
¾ 4 2-7/8 4½ 4½ ½ 3/8 3/8 3/16 ¼
1 4½ 3¼ 4½ 4½ ½ 3/8 3/8 3/16 9/32
1¼ 4¾ 3-7/16 4½ 4½ 5/8 ½ ½ ¼ 5/16
1½ 5¼ 3-7/8 4½ 4½ 5/8 ½ ½ ¼ 11/32
2 6 4½ 4-5/8 4-5/8 ¾ 9/16 9/16 5/16 3/89
2½ 6½ 5 4-5/8 4-5/8 ¾ 9/16 9/16 5/16 13/32
3 7¼ 5¾ 4-5/8 4-5/8 ¾ 9/16 9/16 3/8 7/16
3½ 8 6½ 4-5/8 8-5/8 ¾ 9/16 9/16 3/8 15/32
4 8½ 7 4-5/8 8-5/8 7/8 11/16 11/16 3/8 ½
*4½ 9 7½ 8-5/8 8-5/8 7/8 11/16 11/16 7/16 ½
5 10 8½ 8-5/8 8-5/8 7/8 11/16 11/16 ½ 9/16
6 11 9¼ 8-5/8 8¾ 7/8 11/16 11/16 ½ 11/16
7 12 10¼ 8-5/8 8¾ 1 ¾ ¾ ½ ¾
8 13¼ 11½ 8-5/8 8¾ 1 ¾ ¾ ½ ¾
9 14½ 12¾ 8-5/8 12¾ 1 ¾ 13/16 5/8 13/16
10 16 14 8¾ 12¾ 1 ¾ 7/8 5/8 7/8
*11 17 15 8¾ 12¾ 1-1/8 7/8 15/16 5/8 15/16
12 18 16 12¾ 12-7/8 1-1/8 7/8 1 5/8 1
*13 19¼ 17¼ 12¾ 12-7/8 1-1/8 7/8 1 ¾ 1
14 20¾ 18½ 12-7/8 12-7/8 1¼ 1 1 ¾ 1
15 21¾ 19½ 12-7/8 12-7/8 1¼ 1 1 ¾ 1
in. in. in. in. in. in. in. in. in. in.
16 22¾ 20½ 12-7/8 12-7/8 1¼ 1 1 ¾ 1
*17 24 21¾ 12-7/8 12-7/8 1-3/8 1-1/8 1-1/8 7/8 1-1/8
18 25¼ 23 12-7/8 16-7/8 1-3/8 1-1/8 1-1/8 7/8 1-1/81174 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
*19 26½ 24 12-7/8 16-7 1-3/8 1-1/8 1¼ 7/8 1¼
20 27¾ 25¼ 16-7/8 16-7 1½ 1¼ 1¼ 1 1¼
21 29 26½ 16-7/8 16-1 1½ 1¼ 1-3/8 1 1-3/8
*22 30 27½ 16-1 16-1 1½ 1¼ 1-3/8 1 1-3/8
23 31 28½ 16-1 16-1 1-5/8 1-3/8 1-3/8 1-1/8 1-3/8
24 32½ 29¾ 16-1 16-1 1-5/8 1-3/8 1½ 1-1/8 1-1/8
*See notes at the end of Tables regarding these, also for other particulars.
Table B: For Working Steam Pressures above 150 lbs. and upto 250 lbs. per square inch.
Nominal Intl. Dia. of Diameter Diameter Number and Diameter Thickness of Flange
Pipe of Flange of Bolt of Bolts (off Centre Cast Iron Steel and Bronze Steel
Circle lines)
(Stamped or forged)
(See Notes)
Upto Upto Upto 150 lb. Upto Upto Upto
150 lb. 150 lb. Upto 250 lb. 150 lb. 150 lb. 250 lb.
250 lb. 250 lb. only
in. in. in. in. in. in. in. in. in.
150 lb ½ 2¾ 2-5/8 4½ 4-5/8 ½ 3/8 —
Only ¾ 4 2-7/8 4½ 4-5/8 ½ 3/8 —
250 lb ½ 4½ 3¼ — 4-5/8 — — —
Only ¾ 4½ 3¼ — 4-5/8 — — ½
1 4¾ 3-7/16 4-5/8 ½ 3/8 9/16
1¼ 5¼ 3-7/8 4-5/8 5/8 7/16 11/16
2½ 5½ 4-1/8 4-5/8 5/8 ½ 11/16
2 6½ 5 4-5/8 ¾ 5/8 ¾
2½ 7¼ 5¾ 8-5/8 ¾ 5/8 ¾
3 8 6½ 8-5/8 ¾ 5/8 7/8
3½ 8½ 7 8-5/8 7/8 ¾ 7/8
4 9 7½ 8-5/8 7/8 ¾ 1
*4½ 10 8¼ 8¾ 7/8 ¾ 1
5 11 9¼ 8¾ 1 7/8 1-1/8
6 12 10¼ 12¾ 1 7/8 1-1/8
in. in. in. in. in. in. in. in. in.
7 13¼ 11½ 12¾ 1 7/8 1¼
8 14½ 12¾ 12¾ 1-1/8 1 1¼
9 16 14 12-7/8 1-1/8 1 1-3/8
10 17 15 12-7/8 1-1/8 1 1-3/8
*11 18 16 16-7/8 1¼ 1-1/8 1½
12 19¼ 17¼ 16-7/8 1¼ 1-1/8 1½
*13 20¾ 18½ 16-1 1¼ 1-1/8 1-5/8[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1175
14 21¾ 19½ 16-1 1-3/8 1¼ 1-5/8
15 22¾ 20½ 16-1 1-3/8 1¼ 1¾
16 24 21¾ 20-1 1-3/8 1¼ 1¾
*17 25¼ 23 20-1 1½ 1-3/8 1-7/8
18 26½ 24 20-1-1/8 1½ 1-3/8 1-7/8
*19 27¾ 25¼ 20-1-1/8 1½ 1-3/8 2
20 29 26½ 24-1-1/8 1-5/8 1½ 2
21 30 27½ 24-1-1/8 1-5/8 1½ 2-1/8
*22 31 28½ 24-1-1/8 1-5/8 1½ 1-1/8
*23 32½ 29¾ 24-1-1/8 1¾ 1-5/8 2¼
24 33½ 30¾ 24-1¼ 1¾ 1-5/8 2¼
*See Notes at the end of Tables regarding these also for flanges for pipe lines and other particulars
Table C: For Working Steam Pressures above 250 lbs. and upto 350 lbs. per square inch.
Nominal Intl. Actual External Diameter of Diameter of Bolt Number and Thickness of
Diameter of Pipes
Diameter of Flange Circle Diameter of Flange
Wrought Pipe Bolts (off centre Cast Steel and
lines) Bronze Steel
(Stamped or
forged)
(see Notes)
in. in. in. in. in. in.
½ 27/32 4½ 3¼ 4-5/8 5/8
¾ 1-1/6 4½ 3¼ 4-5/8 5/8
1 1-11/32 4¾ 3-7/16 4-5/8 ¾
1¼ 1-11/16 5¼ 3-7/8 4-5/8 ¾
1½ 1-29/32 5½ 4-1/8 4-5/8 7/8
2 3-3/8 6½ 5 4¾ 1
2½ 3 7¾ 5¾ 8¾ 1
in. in. in. in. in. in.
3 3½ 8 6½ 8¾ 1¼
3¼ 4 8½ 7 8¾ 1¼
4 4½ 9 7½ 8¾ 1-3/8
4½ 5 10 8¼ 8-7/8 1-3/8
5 5½ 11 9¼ 8-7/8 1½
6 6½ 12 10¼ 12-7/8 1½
7 7½ 13¼ 11½ 12-7/8 1-5/8
8 8½ 14½ 12¾ 12-7/8 1-5/8
9 9½ 16 14 12-1 1¾
10 10½ 17 15 12-1 1-7/81176 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
11* 11½ 18 16 16-1 1-7/8
12 12½ 19¼ 17¾ 16-1 2
13* 14 20¾ 18¾ 16-1-1/8 2
14 15 21¾ 19¾ 16-1-1/8 2-1/8
15 16 22¾ 20¾ 16-1-1/8 2-1/8
16 17 24 21¾ 20-1-1/8 2¼
17* 18 25¼ 23 20-1-1/8 2-3/8
18 19 26½ 24 20-1¼ 2-3/8
19* 20 27¾ 25¼ 20-1¼ 2½
20 21 29 26½ 24-1¼ 2½
21 22 30 27½ 24-1¼ 2-5/8
22* 23 31 28½ 24-1¼ 2-5/8
23* 24 32½ 29¾ 24-1-3/8 2¾
24 25 33½ 30¾ 24-1-3/8 2¾
*See Notes at the end of Tables regarding these, also for flanges for pipe lines and other particulars.
The actual external diameters of wrought pipes given above apply equally to all tables.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1177
Table D: For Working Steam Pressures above 350 lbs. and upto 450 lbs. per square inch.
Nominal Intl. Actual External Diameter of Diameter of Number and Thickness of Flange
Diameter of Pipes
Diameter of Flange Bolt Circle Diameter of Cast Steel and Bronze
Wrought Pipe Bolts (off centre Steel (Stamped or
lines) forged) (see Notes)
in. in. in. in. in. in.
½ 27/32 4½ 3¼ 4-5/8 ¾
¾ 1-1/16 4½ 3¼ 4-5/8 ¾
1 1-11/32 5 3¾ 4-5/8 7/8
1¼ 1-11/16 5¼ 3-7/8 4-5/8 1/8
1½ 1-29/32 6 4½ 4¾ 1
2 2-3/8 6½ 5 8-5/8 1
2½ 3 7¼ 5¾ 8¾ 1-1/8
3 3½ 8 6½ 8¾ 1¼
3½ 4 9 7¼ 8-7/8 1¼
4 4½ 9½ 7¾ 8-7/8 1-3/8
*4½ 5 10 8¼ 8-7/8 1½
5 5½ 11 9¼ 12-7/8 1-5/8
6 6½ 12 10¼ 12-7/8 1-5/8
7 7½ 13½ 11½ 12-1 1¾
8 8½ 14½ 12½ 12-1 1-7/8
9 9½ 16 14 16-1 2
10 10½ 17 15 16-1 2
*11 11½ 18½ 16¼ 16-1-1/8 2-1/8
12 12½ 19¼ 17 16-1-1/8 2¼
*13 14 21½ 19 16-1¼ 2-3/8
14 15 22½ 20 16-1¼ 2-3/8
15 16 23¾ 21¼ 20-1¼ 2½
16 17 24¾ 22¼ 20-1¼ 3-5/8
Notes:
It is recommended that the use of sizes marked * should be avoided.
The thickness of flanges given in the tables include a raised face for not more than 1/16 in. high if such be used.
For ½ in. and 5/8 in. bolts the diameters of the holes to be 1/16 in. larger than the diameters of the bolts, and for larger sizes
of bolts 1/8 in.
Iron or Steel flanges, (stamped or forged) may be screwed or riveted on with boss, or welded with fillet, the flanges being of
steel for pressures above 150 lbs. per square inch.
Special welded-on flanges (stamped or forged) for pipe lines 2 in. nominal diameter of pipe and upwards (without valves of
fittings) are made as stated below, the flange selected in all cases being, that given for the next smaller size of pipe in the
corresponding table or as especially stated.1178 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Table E: Flanges for pipes, Valves and Fittings.
For Working Steam Pressures above 450 lbs. and upto 600 lbs. per square inch.
Nominal Approximate Diameter Diameter Number Diameter Thickness of Flange Diameter
Pipe Size Outside of Flange of Bolt of Bolts of Bolts Cast Steel; Steel of Jointing
Diameter of Circle (Stamped or forged) Face
Wrought Pipe screwed or riveted on
with boss, or welded on
with fillet
1 1(a) 2 3 4 5 6 7
in. in. in. in. in. in. in. in.
½ 27/32 4½ 3¼ 4 5/8 ¾ 2¼
¾ 1-1/16 4½ 3¼ 4 5/8 ¾ 2¼
1 1-11/32 5 3¾ 4 5/8 7/8 2½
1¼ 1-11/16 5¼ 3-7/8 4 5/8 7/8 2¾
1½ 1-29/32 6 4½ 4 ¾ 1 3
2 2-3/8 6½ 5 8 5/8 1 3½
2½ 3 7¼ 5¾ 8 ¾ 1-1/8 4
3 3½ 8 6½ 8 ¾ 1¼ 4½
3½ 4 9 7¼ 8 7/8 1¼ 5
4 4½ 9½ 7¾ 8 7/8 1-3/8 5½
4½ 5 10 8¼ 8 7/8 1½ 6
5 5½ 11 9¼ 12 7/8 1-5/8 6½
6 6½ 12 10¼ 12 7/8 1¾ 7½
7 7½ 13½ 11½ 12 1 1-7/8 8¾
8 8½ 14½ 12¾ 12 1 2 9¾
9½ 9½ 16 14 16 1 2-1/8 10¾
10 10½ 17 15¼ 16 1 2¼ 11¾
11 11½ 19 17 16 1-1/8 2-3/8 12¾
12 12½ 20 18 16 1-1/8 2½ 13¾
13 14 21¾ 19½ 16 1¼ 2-5/8 15
14 15 23 20¾ 16 1¼ 2¾ 16
15 16 24 21¾ 20 1¼ 2-7/8 17
16 17 25¼ 23 20 1¼ 3 18[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1179
Table F: Steel Flanges for Pipes, Valves and Fittings.
For Working Steam Pressures above 600 lbs. and upto 900 lbs. per square in. and temperature
upto 800°F (427°C).
Nominal Actual Outside Diameter of Diameter of Number of Diameter of Thickness of Diameter of
Pipe Size Diameter of Flange Bolt Bolts Bolts Flange Jointing
Wrought Pipe Face
1 1(a) 2 3 4 5 6 7
in. in. in. in. in. in. in. in.
½ 5 3½ 4 ¾ 7/8 2
¾ 1-1/16 5 3½ 4 ¾ 7/8 2
1 1-11/32 5½ 4 4 ¾ 1 2¼
1¼ 1-11/16 5¾ 4¼ 4 ¾ 1-1/8 2½
1½ 1-29/32 6¼ 5¾ 4 ¾ 1-1/8 2¾
2 2-3/8 6¾ 5¼ 8 ¾ 1¼ 3¼
2½ 3 7¼ 5¾ 8 ¾ 1¼ 3¾
3 3½ 8 6½ 8 7/8 1-3/8 4¼
3½ 4 9¼ 7½ 8 7/8 1½ 4¾
4 5 9¾ 8 8 1 1-5/8 5¼
4½ 5½ 10½ 8½ 8 1 1-5/8 5¾
5 6 11¼ 9¼ 12 7/8 1¾ 6¼
6 7 12¾ 10¾ 12 1 2 7¼
7 8½ 14¾ 12½ 12 1-1/8 2¼ 8½
8 9½ 16¼ 14 12 1¼ 2½ 9½
9 10½ 17¼ 15¼ 16 1-1/8 2-5/8 10½
10 11½ 19 16¾ 16 1¼ 2-7/8 11½
*10½ 12½ 21 18½ 16 1-3/8 3-1/8 12¾
*11¾ 14 22¾ 20 16 1½ 3¼ 13¾
*12-5/8 15 24 21¼ 16 1½ 3½ 14¾
*13½ 16 25½ 22¾ 20 1½ 3¾ 16
*14-3/8 17 27½ 24½ 20 1-5/8 4 17
*15¼ 18 29¼ 26 20 1¾ 4½ 18
*The sizes shall be specified by the outside diameter dimensions given in column 1(a). The figures in column 1 (nominal
bore) are approximate and are given for information only.1180 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Table G: Steel Flanges for Pipes, Valves and Fittings.
(To be used in Conjunction with the Notes and Appendices)
For Working Steam Pressures above 900 lbs. and upto 1400 lbs. per square in.
and temperature upto 800°F (427°C).
Nominal Maximum Diameter of Diameter of Number of Diameter of Thickness of Diameter of
Pipe Size Outside Flange Bolt Bolts Bolts Flange Jointing
Diameter of Face
Wrought Pipe
1 1(a) 2 3 4 5 6 7
in. in. in. in. in. in. in. in.
½ 27/32 5½ 4 4 ¾ 1 2¼
¾ 1-1/16 5½ 4 4 ¾ 1 2¼
1 1-11/32 5¾ 4¼ 4 ¾ 1-1/8 2½
1¼ 1-11/16 6¼ 4¾ 4 7/8 1¼ 2¾
1½ 2-3/8 6¾ 5¼ 8 ¾ 1-3/8 3
2 3 7¼ 5¾ 8 ¾ 1-3/8 3½
2½ 3 8 6½ 8 7/8 1-5/8 4½
3 4 9¼ 7½ 8 1 1-7/8 5
3½ 4 10½ 8½ 8 1-1/8 2-1/8 5½
4 5 11¼ 9¼ 8 1-1/8 2¼ 6
4½ 5½ 11¾ 10 12 1 2-3/8 6½
5 6½ 12¾ 10¾ 12 1-1/8 2-5/8 7
6 7½ 14¾ 12½ 12 1¼ 2-7/8 8
7 9 17 14½ 12 1-3/8 3¼ 9¼
8 10½ 18¾ 16 12 1½ 3½ 10½
9 11½ 20 17½ 16 1-3/8 3¾ 11¾
10 12½ 22 19¼ 16 1½ 4¼ 12¾
STANDARD PIPE FLANGES
The different tables of flange dimensions (Table F.T.) have been designed to suit pipes and vessels
containing steam at a maximum temperature of 427°C.
If the temperature is higher than 427°C and does not exceed 482°C the following Table
should be used for the next higher pressure.
Water pipes for a given pressure in which the water temperature does not exceed 232°C
may be fitted with Flanges to the next lower Table than that required for steam at the stated
pressure and a maximum temperature of 427°C.
In all cases the hydraulic test pressure should be twice the maximum allowable working
pressure to which the pipes are subjected in use.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1181
Table H: showing the permissible application of pipe flanges tables.
Pressure Steam Steam Water Hydraulic Test
Pressure Kg/cm2
Kg/cm2 (g) at 482°C at 427°C at 232°C
(g)
Table Table Table
98.4 - T S 196.8
63.3 T S R 126.5
42.2 S R K 84.3
31.6 R K J 63.2
24.6 K J H 49.2
17.5 J H F 35.1
10.5 H F - 21.11182 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
APPENDIX-G
SAFETY VALVE DISCHARGE EFFICIENCY TESTING
A. General.
(i) The purpose and manner of testing shall be such as to provide suitable data from
which a constant 'c' may be determined in Equation(5/7). To this end the following
information shall be supplied to the Inspecting Authority before testing is undertaken:
(a) Full particulars on the values to be tested and range of valves and springs which
they represent.
(b) Details of the testing rig including instrumentation and proposed calibration
procedure.
(c) Proposed source, capacity, pressure, temperature of steam used for the test.
(ii) All testing shall be witnessed by Inspecting Authority or the Competent Person.
(iii) Tests shall be made to determine the operative characteristics of the safety valves
for which a constant is to be determined and also to establish the discharge
efficiency of the safety valve.
(iv) Where possible, the tests to determine operating characteristics and discharge
efficiency shall be carried out using the same steam, the same pressure conditions
and the same location. When the tests are carried out separately, the valves in each
case shall be complete and shall include all internals, e.g. blow-down adjustments
rings.
(v) The set pressure at which the operating characteristics are determined shall be the
minimum set pressure for which the spring used is designed. The tests shall be
carried out using steam and shall determine the set pressure, the lift at the over
pressure specified for the type of valve, as defined in regulations 193 to 195.
(vi) The Inspecting Authority may dispense with Operating Characteristic tests described
in A(v).
(vii) Discharge efficiency tests shall be carried out using steam and shall be carried out
relative to the operative characteristic tests described in A(v).
(viii) When the Inspecting Authority is satisfied that the design of valve will operate
satisfactorily it shall if desired, be permissible to hold the valve head mechanically at
the proven lift while carrying out the tests to ascertain the discharge efficiency.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1183
B. VALVES USED IN THE TEST PROGRAMME
(i) The safety valves tested shall, as far as is practicable, be representative of the
pressure and size range of valve manufactured.
(ii) The tests for operative characteristics and the discharge efficiency test shall be
carried out on the three sizes or half the number of sizes in the range, whichever is
smaller, with a minimum of two sizes.
(iii) When the range is extended, due consideration shall be given, in consultation with
the Inspecting Authority, to whether further witnessed tests are necessary.
(iv) The test for operating characteristics shall be carried out at three significantly
different set pressure for each size of valve.
(v) The discharge efficiency tests shall be carried out relative to one set pressure for
each size of valve.
(vi) Each tests shall be carried out a minimum of three times to obtain acceptable
average results.
(vii) For the case of valves of either novel or special design of which one size only is
being manufactured, tests at one set pressure are permitted by agreement with the
Inspecting Authority. When the range of sizes or pressure is extended, due
consideration shall be given in consultation with the Inspecting Authority, to whether
further witnessed tests are necessary.
C. DETERMINATION OF CONSTANT ‘C’
Let
E be the measure capacity, on test of saturated steam (Kg/h.)
t
Pbe the pressure at safety valve inlet at which the capacity was measured (bar gauge);
t
A be the area appropriate to the type of valve (mm2), [see regulation 196(1)].
X be the allowable percentage over pressure for the type of valve under test. (See
regulation 196) .
Ct be the constant determined from test.
To accommodate the permitted spread on test results, tolerance on valve parts and
springs, this calculated value of ‗Ct‘ shall be derated to 80% to obtain the value of ‗C‘ to be1184 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
used in equation (5/7) of regulation 196(1). This is to ensure that all production valves will
achieve their rated discharge capacity at not more than the over pressure allowed for the
type of valve tested.
The Inspecting Authority may accept a more favourable derating factor of up to 90%
of the calculated value of ‗Ct‘ where the performance of the valves under test and the
manufacturing and spring tolerance applicable ensure that the allowable overpressure for
the type of valve under test will not be exceeded when a valve is discharging its rated
capacity in service.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1185
APPENDIX- H
[See regulation 295(7) ]
A. Power Utility Boilers working at a pressure 100 kg/cm2(g) or more and upto
100,000 hours of operations.
(1) The boilers working at a pressure 100 kg/cm2(g) or more and up to 100,000 of
operations, generating steam for power generation shall be inspected as detailed
below after the expiry of twelve months from the date of inspection carried out in
accordance with the procedure provided in regulation 311 and certification of fitness
shall be issued by the concerned Competent Person in the State, through inspection
of the following records which shall be made available to the concerned Competent
Person at least thirty days before the expiry of the operating certificate, provided he
is satisfied that the boiler can be allowed to be operated for a further period of twelve
months.
(a) Operation data for superheater and reheater temperature excursions from the
output of Data Acquisition System (DAS).
(b) History of shut downs during the previous year with their causes and actions
taken.
(c) Records of any Non-Destructive test carried out on the boiler pressure parts
during the year.
(d) Water quality to the boiler is maintained up to the requirement of such boilers and
on line data of the quality be provided.
(e) Boiler tube failure record (location, number of tubes repaired/replaced).
(2) Inspection shall be carried out by the concerned Competent Person at the expiry of
twenty-four months as provided in regulation 311. However, in case shutdown of
fifteen days or more is planned any time before expiry of the certification period and
after six months of the certification, the Competent Person shall be duly informed so
that complete inspection can be scheduled during the said shut down period.
B. Power boiler working at a pressure up to 100 kg/cm2(g) and up to 100,000 hours of
operations or 25 years of operations as applicable.
(1) The boilers working at a pressure up to 100 kg/cm2(g)and up to 100,000 hours of
operations for boiler operating above 400°C and 25 years of operation for boilers
operating less than 400°C generating steam for power generation shall at the expiry
of twelve months from the date of inspection carried out in accordance with the
procedure provided in regulation 311and certification of fitness by the concerned
Competent Person in the State, and having satisfied with the operation records at
paragraph ‗A‘, shall be allowed for running for another period of twelve months.
(2) Inspection shall be carried out by concerned Competent Person at the expiry of
twenty-four months as provided in regulation 311. However, if shutdown of fifteen
days or more any time before expiry of the certification period and after six months of
the certification, Competent Person shall be duly informed so that inspection can be
scheduled during the said shut down period.1186 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
C. Boilers working at a pressure 100 kg/cm2(g) or more, and more than 100,000 hours
of operations.
(1) Boiler working at a pressure 100 kg/cm2(g)and more than 100,000 hours of
operations, generating steam for power generation, shall continue to be subject to
inspection as provided in regulation 311every year to the satisfaction of concerned
Competent Person in States. However, if Remnant Life Assessment (RLA), as per
provisions in these regulations is carried out on the boiler and if found satisfactory,
then procedure as per paragraph ―A‖ above shall be applicable.
(2) Inspection shall be carried out by the concerned Competent Person at the expiry of
twenty-four months as provided in regulation 311. However, if shut down of fifteen
days or more any time before expiry of the certification period and after six months of
the certification, Competent Person shall be duly informed so that inspection can be
scheduled during the said shut down period.
D. Boiler working at a pressure up to 100 kg/cm2(g) and more than 100,000 hours of
operations or twenty-five years of operations as applicable.
1) Boiler working at a pressure up to 100 kg/cm2(g) and more than 100,000 hours of
operations for boiler operating above 400°C and twenty-five years of operation for
boilers operating less than 400°C, shall continue to be subjected to inspection every
year as provided in regulation 311. However, if Remnant Life Assessment (RLA), as
per provisions in these regulations is carried out on the boiler and if found
satisfactory, then procedure as per paragraph ―B‖ above shall be applicable.
2) Inspection shall be carried out by the concerned Competent Person at the expiry of
twenty-four months as provided in regulation 311. However, in case of shut down of
fifteen days or more any time before expiry of the certification period and after six
months of the certification, Competent Person shall be duly informed so that
inspection can be scheduled during the said shut down period.
Note: Wherever High Pressure (HP) and Low Pressure (LP) boilers operate from
the same enclosure, the procedure for inspection as applicable to High
Pressure (HP) boiler shall also be applicable to Low Pressure (LP) boiler.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1187
APPENDIX-I
[See regulation 295(8)]
A. Waste Heat Boilers (Fired) upto twenty years of age used exclusively in
continuous process plant.
(1) For Waste Heat Boilers (Fired) up to twenty years of age used exclusively in continuous
process plant, at the expiry of twelve months and at twenty four months from the date of
inspection carried out in accordance with the procedure provided in regulation 311and
certification of fitness issued by the concerned Competent Person in the State, and having
satisfied with the operation records as given below received alongwith application in Form-
IX duly filled in shall be allowed for running for another period of twelve months:—
(a) Operation data for superheater and reheater temperature excursions from the output
of Data Acquisition System (DAS) or operation data for superheater temperature
excursions maintained in the log sheet temperature record;
(b) History of shut downs during the previous year with their causes and actions taken;
(c) Records of any Non-Destructive test carried out on the boiler pressure parts during
the year;
(d) Water quality to the boiler is maintained as per the requirement of such boilers and
on line data of the quality be provided through Data Acquisition System (DAS) or
through water quality record logbook maintained at plant or at source of water;
(e) Boiler tube failure record (location, number of tubes repaired/replaced).
(2) Inspection shall be carried out by the concerned Competent Person at the expiry of thirty
six months as provided in regulation 311. However, in case of shutdown of fifteen days or
more any time before expiry of the certification period and after six months of the
certification, Competent Person shall be duly informed so that inspection can be scheduled
during the said shutdown period.
B. Waste Heat Boilers (Unfired) up to twenty years of age used exclusively in
continuous process plant.
(1) For Waste Heat Boilers (Unfired) up to twenty years of age used exclusively in
continuous process plant, at the expiry of twenty-four months from the date of inspection
carried out in accordance with the procedure provided in regulation 311and certification of
fitness by the concerned Competent Person in the State, and having satisfied with the
operation records at paragraph ―A‖, shall be allowed for running for another period of twenty-
four months.
(2) Inspection shall be carried out by the concerned Competent Person at the expiry of forty-
eight months as provided in regulation 311. However, in case of shutdown of fifteen days or
more any time before expiry of the certification period and after six months of the
certification, Competent Person shall be duly informed so that inspection can be scheduled
during the said shutdown period.
C. Waste Heat Boilers (Fired) more than twenty years of age used exclusively in
continuous process plant.1188 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Boiler more than twenty years of age shall continue to be subjected to inspection as
provided in regulation 311every year to the satisfaction of concerned Competent Person in
the State. However, if Remnant Life Assessment (RLA) as per the provisions of these
regulations is carried out on the boiler and if found satisfactory, then procedure as given at
paragraph 'A' above shall be followed.
D. Waste Heat Boilers (Unfired) more than twenty years of age used exclusively in
continuous process plant.
Boiler more than twenty years of age shall continue to be subjected to inspection as
provided in regulation 311every year to the satisfaction of concerned Competent Person in
State. However, if Remnant Life Assessment (RLA) as per the provisions of these
regulations is carried out on the boiler and if found satisfactory, then procedure as given at
paragraph 'B' above would be applicable.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1189
APPENDIX- J
Recommended forms of weld preparation (Modified) details I-p inclusive are suitable for
manual welding and normal automatic welding where the automatic deep penetration
technique is employed, some modification may be necessary.
lSINGLE J BUTT WELD
Weld Detail Welding Thickness Gap G Angle α° Radius r Root
Position T (mm) (mm) (mm) face R
(mm)
Welded
from both
sides or
one side
All Over 12.7 0 – 10° - 20° 4.8 – 9.5 1.6 – 3.2
only
positions 457.2
m DOUBLE J BUTT WELD
Weld Detail Welding Thickness Gap G Angle α° Radius r Root
Position T (mm) (mm) (mm) face R
(mm)
Welded
from both
sides
All Over 25.4 0 – 10° - 20° 4.8 – 9.5 1.6 – 3.2
positions 457.2
n SINGLE BEVEL BUTT WELD
Weld Detail Welding Thickness Gap G Angle α° Root
Position T (mm) (mm) face R
(mm)
Welded
from
4.8 – 9.5 3.2 – 12.7 45° - 50° 0 – 1.6
both
sides or
All
one side
positions
only
Over 9.5 4.8 – 7.9 45° - 50° 0 – 1.6
p DOUBLE BEVEL BUTT WELD
Weld Detail Welding Thickness Gap G Angle α° Root
Position T (mm) (mm) face R
(mm)
Welded
from
both
sides
All Over 12.7 4.8 - 7.9 45° - 50° 0 – 1.6
positions1190 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
The use of Min. Gap and Min. Angle should be associated with the Max. Radius of 10
mm.Conversely the Max.Gap and Max. Angle should be associated with the Min. Radius r of
5 mm.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1191
APPENDIX- K
Time limits for the various activities
Sl. Activity Regulation/ Time limit Authority /Person
No. Provision in
IBR
(1) (2) (3) (4) (5)
1. Issue of Certificate for 8(a) (i) 3 days for boiler Inspecting Authority
manufacture and test in Form- components.
I(Part-B) and Form- I(Part-C)
(ii) 7 days for boiler
2. Issue of Inspecting Authority 8(a)(v) 2 days Inspecting Authority
Certificate during erection in
―Form-I(Part-E) ‖
3. Steam Tests of boiler 299(1) 30 days Inspector
4. Issue of provisional order in 300(2) 48 Hours Inspector
Form-X after registration
inspection
5. Assigning of Registration No. 300 30 days Chief Inspector of
for boilers Boilers
6. Transfer of Memorandum of 309 15 days Chief Inspector of
Inspection Book & Registration Boilers
Book
7. Issue of Certificate for use of 310 48 Hours Competent Person
boiler in Form-XII
8. Submission of Remnant Life 313 to 315 30 days from date of Well Known
Assessment report/ completion of Remnant Life
recommendations inspection/tests Assessment
Organisation
9. Recognition of repairers boilers 316(5) 30 days Chief Inspector of
& steam pipes Boilers
10. Permission to carry out 316(3)(e)(ii) 2 days Chief Inspector of
repairs/alterations in boilers Boilers
11 Approval of design and 321(1) (i) 5 days for boilers Inspecting Authority
manufacturing drawings for components &
boilers upto 20
boilers and boiler components
TPH capacity.
made in India
(ii) 15 days for boilers
above 20 TPH
&upto 100 TPH
capacity
(iii) 21 days for boilers
above 100 TPH
capacity
12. Approval of materials for 321(3) (i) 5 days, in case of Technical
boilers and boiler components same materials as Adviser(Boilers)
previously approved for
made outside India1192 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
the same design
pressure & temperature
(ii) 10 days, in other
cases
13. Approval of design and 321(3) 21 days Chief Inspector of
manufacturing drawings for Boilers
boilers and boiler components
made outside India
14, Issue of Welder qualification 541 5 days Competent
certificate in Form-II after Authority
submission of satisfactory
reports
15. Inspection during construction/ Appendix-A 2 days Inspecting
manufacture Authority/
Competent Person
Note: (1) Above time limits shall be applicable from the date of submission of complete
details/documents.
(2) After expiry of prescribed time limits for an activity, approval for that activity shall be
deemed to have been granted.[भाग II—खण्ड 3(i)] भारतकाराजपत्र:असाधारण 1193
APPENDIX-L
CONVERSION TABLE
Length
1 centimeter (cm) = 10 mm
1 foot (ft) = 304.8 mm
1 inch (in) = 25.4 mm
1 meter (m) = 1000 mm
1 millimeter (mm) = 1 mm
1 yard (yd) = 914.4 mm
Temperature
1 oC = 1 oC
1 oC = 5/9 [o F – 32]
1 oC = [o K -273.15]
Angle
1 degree (º) = 1 degree (º)
1 radian (rad) = 57.2958º
1 minute (‘) = 0.0166º
1 second (‘‘) = 0.0002º
Pressure
1 atmosphere = 1.033227 kg/cm2 (g)
1 bar = 1.019716 kg/cm2 (g)
1 kg/cm2 = 14.223 psi
1 MPa = 10.19716 kg/cm2 (g)
1 lbs/ft2 = 0.000488 kg/cm2 (g)
1 lbs/inch2 = 0.07030696 kg/cm2 (g)
1 ton/ft2 = 0.9764855 kg/cm2 (g)
1 ton/inch2 = 140.6139 kg/cm2 (g)
Force
1kgf = 9.80665 N
Note: Values shall be rounded off to nearest one decimal point.
[F. No. P-30014/3/2021-Boiler]
SANDEEP SADANAND KUMBHAR, Secy.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.