Home› India› Ministry of Commerce and Industry› QCO for Cycle and Rickshaw Tyres and Tubes (Quality Control)...
Date: 13-Dec-2023 Category: Extra Ordinary State: Union Government Country: India

QCO for Cycle and Rickshaw Tyres and Tubes (Quality Control) Order, 2023.

Issued by Ministry of Commerce and Industry · DEPARTMENT FOR PROMOTION OF INDUSTRY AND INTERNAL TRADE

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

What it means

  • The gazette notification introduces the Cycle and Rickshaw Tyres and Tubes (Quality Control) Order, 2023.
  • This order mandates that cycle and rickshaw tyres and tubes must conform to the corresponding Indian Standards and bear the Standard Mark under a license from the Bureau of Indian Standards (BIS).

Key Changes

  • The order will come into force six months from the date of publication of the notification in the Official Gazette, which was December 13, 2023.
  • Micro enterprises have twelve months from the date of publication to comply with the order.
  • Small enterprises have nine months from the date of publication to comply with the order.
  • The order does not apply to goods or articles manufactured domestically for export.
  • The relevant Indian Standards are IS 2414:2005 for Cycle and Rickshaw Pneumatic Tyres and IS 2415:2015 for Cycle - Rubber Tubes (Moulded or Jointed).
  • The Bureau of Indian Standards (BIS) is the certifying and enforcing authority for the specified goods.

Impact Analysis

Manufacturers of Cycle and Rickshaw Tyres and Tubes

  • Action Item: Manufacturers should immediately begin the process of obtaining BIS certification and ensure their products meet the required standards. They should also review their production processes and quality control measures.

Exporters of Cycle and Rickshaw Tyres and Tubes

  • Action Item: Exporters need to maintain documentation to prove that their products are solely for export purposes.

Consumers

  • Action Item: Consumers should look for the Standard Mark when purchasing cycle and rickshaw tyres and tubes to ensure quality.

Bureau of Indian Standards (BIS)

  • Action Item: BIS needs to prepare for an increase in certification requests and ensure adequate resources for enforcement.

Retailers and Distributors

  • Action Item: Retailers and distributors should verify that the products they source have the Standard Mark from BIS.

Key Entities Referenced

Bureau of Indian Standards (BIS): The national standards body of India responsible for standardization, marking, and quality certification of goods. Bureau of Indian Standards Act, 2016: The Act that empowers the BIS to carry out its functions and provides for penalties for contravention of its regulations. Micro, Small and Medium Enterprises Development Act, 2006: The Act that defines micro, small, and medium enterprises and provides for their development and regulation. Cycle and Rickshaw Tyres and Tubes (Quality Control) Order, 2023: The order mandating quality control standards for cycle and rickshaw tyres and tubes. IS 2414:2005: Indian Standard for Cycle and Rickshaw Pneumatic Tyres. IS 2415:2015: Indian Standard for Cycle - Rubber Tubes (Moulded or Jointed).
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 सी.जी.-डी.एल.-अ.-14122023-250659 CG-DxLx-xEG-I1D4H1x2x2x0 23-250659 xxxGIDExxx असाधारण EXTRAORDINARY भाग II—खण् ड 3—उप-खण्ड (ii) PART II—Section 3—Sub-section (ii) प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 5094] नई ददल्ली, बुधवार, ददसम्ब र 13, 2023/अग्रहायण 22, 1945 No. 5094] NEW DELHI, WEDNESDAY, DECEMBER 13, 2023/AGRAHAYANA 22, 1945 वाजणज्य और उद्योग मत्रं ालय (उद्योग सवं धनध और आतं ररक व्यापार जवभाग) आदेि नई ददल्ली, 11 ददसम् बर, 2023 का.आ. 5323(अ).—भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करते हुए, केंद्र सरकार का, भारतीय मानक ब्यरू ो स ेपरामि ध करने के बाद यह मत ह ैदक यह िनजहत म ेंआवश्यक अथवाजहतकर ह,ै अत: एतद्द्वारा जनम्नजलजखत आदेि करती ह,ै नामत:- 1. सजं िप्त िीर्कध और प्रारंभ - (1) इस आदेि को साइकल और ररक्िा टायसध एण्ड ट्यूब्स (गणु वत्ता जनयंत्रण) आदेि, 2023 कहा िाएगा। (2) यह आदेि िासकीय रािपत्र म ें इस अजधसूचना के प्रकािन की तारीख स ेछह माह के बाद लागू होगा। 2. मानक जचह्न का अजनवाय ध प्रयोग – ताजलका के कॉलम (1) म ें जवजनर्दधष्ट वस्ट्तुए ं या सामान ताजलका के कॉलम (2) म ें उजल्लजखत तदनुरूपी भारतीय मानक के अनुरूप होंगे तथा उनम ें भारतीय मानक ब्यूरो (अनुपालन मल्ू यांकन) जवजनयम, 2018 की अनुसूची-II की स्ट्कीम-I के अनुसार भारतीय मानक ब्यूरो के लाइसेंस के तहत मानक जचह्न लगा होगा। बिते दक इस आदिे म ेंस े कुछ भी जनयाधत की िाने वाली स्ट्वदिे म ें जवजनर्मधत वस्ट्तुओं या सामान पर लागू नहीं होगा। बिते दक इसके अजतररि सूक्ष्म उद्यम के संबंध म,ें िैसा दक सूक्ष्म, लघु और मध्यम उद्यम जवकास अजधजनयम, 2006 (2006 का 27) की धारा 2 के क्रमिः खंड (ि) और (ड) म ें पररभाजर्त दकया गया ह,ै यह आदेि इस अजधसूचना के प्रकािन की तारीख स े बारह माह की अवजध समाप्त होन े के बाद लागू होगा। 7721 GI/2023 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] बिते दक लघु उद्यम के संबंध म ें भी, िैसा दक सूक्ष्म, लघु और मध्यम उद्यम जवकास अजधजनयम, 2006 (2006 का 27) की धारा 2 के क्रमिः खडं (ि) और (ड) म ें पररभाजर्त दकया गया ह,ै यह आदेि इस अजधसूचना के प्रकािन की तारीख स े नौ माह की अवजध समाप्त होन े के बाद लाग ू होगा। 3. प्रमाणन और प्रवतनध प्राजधकरण –भारतीय मानक ब्यरू ो ताजलका म ें जवजनर्दधष्ट वस्ट्तओंु या सामान के जलए प्रमाणन और प्रवतधन प्राजधकरण होगा। 4. उल्लघं न के जलए पने ल्टी– इस आदेि के प्रावधानों का उल्लंघन करन े वाल े व्यजि को भारतीय मानक ब्यूरो अजधजनयम, 2016 के प्रावधानों के तहत दंजडत दकया िाएगा। ताजलका वस्ट्त ु या सामान भारतीय मानक भारतीय मानक का िीर्कध (1) (2) (3) साइकल और ररक्िा 2414 : 2014 साइकल और ररक्िा न्यूमैरटक टायसध टायस ध एण्ड ट्यूब्स 2415 : 2015 साइकल– रबर ट्यूब्स (माउल्डडे अथवा ज्वाइंटेड) नोट – इस ताजलका के प्रयोिन के जलए, भारतीय मानकों के सबं ंध म ें िारी संिोधनों सजहत उनके नवीनतम संस्ट्करण, िैसा दक भारतीय मानक ब्यरू ो द्वारा समय-समय पर अजधसूजचत दकए गए ह,ैं लागू होंगे। [फा.सं. पी- 39012/6/2023–एलआर] संिीव, संयुि सजचव MINISTRY OF COMMERCE AND INDUSTRY (Department for Promotion of Industry and Internal Trade) ORDER New Delhi, the 11th December, 2023 S.O. 5323(E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards, is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following Order, namely:- 1. Short title and commencement.- (1) This order may be called the Cycle and Rickshaw Tyres and Tubes (Quality Control) Order, 2023. (2) It shall come into force on the expiry of six months from the date of publication of this notification in the Official Gazette. 2. Compulsory use of Standard Mark.- Goods or articles specified in column (1) of the Table shall conform to the corresponding Indian Standard specified in column (2) of the Table and shall bear the Standard Mark under a license from the Bureau of Indian Standards as per Scheme-1 of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018: Provided that nothing in this Order shall apply to goods or articles manufactured domestically for export. Provided further that in relation to micro enterprises, as defined in clauses (h) and (m), respectively of section 2 of the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006), it shall come into force on the expiry of twelve months from the date of publication of this notification. Provided also that in relation to small enterprises, as defined in clauses (h) and (m), respectively of section 2 of the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006), it shall come into force on the expiry of nine months from the date of publication of this notification. 3. Certification and enforcement authority.-The Bureau of Indian Standards shall be the certifying and enforcing authority for the goods or articles specified in the Table.[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 3 4. Penalty for Contravention. – Any person who contravenes the provisions of this Order shall be punishable under the provisions of the Bureau of Indian Standards Act, 2016. TABLE Goods or articles Indian Standard Title of Indian Standard (1) (2) (3) Cycle and Rickshaw Tyres and 2414:2005 Cycle and Rickshaw Pneumatic Tyres Tubes 2415 :2015 Cycle - Rubber Tubes (Moulded or Jointed) Note.- For the purposes of this Table, the latest version of Indian Standards including the amendments thereof, as notified by the Bureau of Indian Standards from time to time shall apply. [F. No. P-39012/6/2023-LR] SANJIV, Jt. Secy. Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research

Related Documents from Ministry of Commerce and Industry