See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-22072023-247533
xxxGIDHxxx
CG-DL-E-22072023-247533
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग II—खण् ड 3—उप-खण्ड (ii)
PART II—Section 3—Sub-section (ii)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 3134] नई ददल्ली, िुक्रवार, िुलाई 21, 2023/आर्ाढ़ 30, 1945
No. 3134] NEW DELHI, FRIDAY, JULY 21, 2023/ASHADHA 30, 1945
वाजणज्य और उद्योग मत्रं ालय
(उद्योग सवं धनध और आतं ररक व्यापार जवभाग)
आदेि
नई ददल्ली, 21 िुलाई, 2023
का.आ. 3267(अ).—भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 25 की उप-धारा (3)
और धारा 17 के साथ परित धारा 16 की उप-धाराओं (1) और (2) द्वारा प्रदत्त िजियों का प्रयोग करते हुए, केंद्र सरकार
का भारतीय मानक ब्यरू ो के साथ परामि ध करन े के बाद यह मत ह ै दक यह िनजहत म ें आवश्यक अथवा जहतकर ह,ै अत:
एतद्द्वारा जनम्नजलजखत आदिे करती ह,ै नामत:-
1. सजं िप्त िीर्कध और प्रारंभ - (1) इस आदेि को बोल््स, न्स और फास्ट्टेनेस ध (गुणवत्ता जनयंत्रण) आदिे , 2023 कहा
िाएगा।
(2) यह आदेि इस अजधसूचना के प्रकािन की तारीख स ेछ: माह की अवजध के बाद प्रभावी होगा:
बिते दक सूक्ष्म, लघु और मध्यम उद्यम जवकास अजधजनयम, 2006 (2006 का 27) के तहत यथा पररभाजर्त लघ ु उद्यमों के
जलए यह आदेि इस अजधसूचना के प्रकािन की तारीख से नौ माह की अवजध के बाद प्रभावी होगा।
बिते दक सूक्ष्म, लघु और मध्यम उद्यम जवकास अजधजनयम, 2006 (2006 का 27) के तहत यथा पररभाजर्त सूक्ष्म उद्यमों
के जलए यह आदेि इस अजधसूचना के प्रकािन की तारीख स े बारह माह की अवजध के बाद प्रभावी होगा।
2. मानक जचह्न का अजनवाय ध प्रयोग - ताजलका के कॉलम (1) म ें जवजनर्दधष्ट वस्ट्तुए ँ या सामान उि ताजलका के कॉलम (2)
म ें उजल्लजखत तद्नरूु पी भारतीय मानक के अनरूु प होंगे तथा उनम ें भारतीय मानक ब्यरू ो (अनुपालन मूल्यांकन) जवजनयम,
2018 की अनुसूची-II की स्ट्कीम-1 के अनुसार ब्यूरो के लाइसेंस के तहत मानक जचन्ह लगा होगा।
4710 GI/2023 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
बिते दक इस आदेि म ेंस े कुछ भी जनयाधत की िाने वाली स्ट् वदिे म ें जवजनर्मधत वस्ट्तुओं या सामान पर लागू नहीं होगा।
बिते इसके अलावा दक इस आदेि म ें स े कुछ भी उन वस्ट्तुओं अथवा सामान पर लाग ू नहीं होगा जिन्ह े दकसी तैयार वस्ट्त ु
अथवा उनके जहस्ट्स े अथवा घटक के रूप म ेंआयात दकया गया ह।ै
बिते दक इस आदेि म ें स े कुछ भी उन वस्ट्तुओं अथवा सामान पर लाग ू नहीं होगा जिनका घरेलू जवजनमाधता द्वारा जनयाधत
हते ु उत्पाद जवजनर्मधत करने के जलए आयात दकया गया ह।ै
बिते दक इस आदेि म ें स े कुछ भी सूक्ष्म, लघु और मध्यम उद्यम मंत्रालय के ‘उद्यम पोटधल’ के तहत पंिीकृत उद्यमों द्वारा
स्ट्वदेिी रूप स े जवजनर्मधत वस्ट्तओंु अथवा सामान पर लाग ू नहीं होगा, जिसम ें मूल लागत पर संयंत्र एव ं मिीनरी अथवा
उपकरण म ें जनवेि पच्चीस लाख रूपए स े अजधक नहीं ह ै तथा चाटधडध अकाउंटेंट द्वारा यथा सत्याजपत उत्पादन जपछले जवत्तीय
वर्ध म ें दो करोड़ रूपए स ेअजधक नहीं ह,ै उसे संगत गुणवत्ता जनयंत्रण आदेि के कायाधन्वयन स ेछूट दी िाएगी।
3. प्रमाणन और प्रवतनध प्राजधकरण – यह ब्यूरो ताजलका के कॉलम (1) म ें जवजनर्दधष्ट वस्ट्तओंु या सामान के जलए प्रमाणन
और प्रवतधन प्राजधकरण होगा।
4. उल्लघं न के जलए पने ल्टी – इस आदेि के प्रावधानों का उल्लंघन करने वाले व्यजि को भारतीय मानक ब्यरू ो
अजधजनयम, 2016 के प्रावधानों के तहत दंजडत दकया िाएगा।
ताजलका
वस्ट्त ु या सामान भारतीय मानक भारतीय मानक का िीर्कध
(1) (2) (3)
1363(पाटध 1):2019 उत्पाद ग्रेड सी के हक्े सागन हडे बोल््स, स्ट्क्रू और न्स – हक्े सागन
बोल््स, न्स और हडे बोल््स (आकार एम 5 से एम 64 तक)
फास्ट्टेनेस ध 1363(पाटध 2):2018 हक्े सागन हडे स्ट्क्रू (आकार एम 5 स े एम 64 तक)
1363(पाटध 3):2018 उत्पाद ग्रेड सी के हक्े सागन हडे बोल््स, स्ट्क्रू और न्स – हक्े स ागन
न्स (आकार एम 5 स ेएम 64 तक)
1364(पाटध 1):2018 उत्पाद ग्रेड ए और बी के हक्े सागन हडे बोल््स, स्ट्क्रू और न्स –
हक्े सागन हडे बोल््स (आकार एम 1.6 स े एम 64 तक)
1364(पाटध 2) :2018 उत्पाद ग्रेड ए और बी के हक्े सागन हडे बोल््स, स्ट्क्रू और न्स –
हक्े सागन हडे स्ट्क्रू (आकार एम 1.6 स े एम 64 तक)
4621:1975 सावधिजनक स्नानघर और िौचालय म ेंइस्ट्तेमाल के जलए दिाधए गए
बोल््स
5187:1972 फ्लि बोल््स
10238:2001 फास्ट्टेनेस ध - थ्रेजडड स्ट्टील
फास्ट्टेनेस ध –स्ट्टील स्ट्टृक्चस धके जलए स्ट्टेप बोल््स
12427:2001 फास्ट्टेनेस ध - थ्रेजडड स्ट्टील
फास्ट्टेनेस ध - हक्े सागन हडे
रंिजमिन टावर बोल््स
3757:1985 हाई स्ट् रेंथ स्ट्टृक्चरल बोल््स
204(पाटध 2):1992 टावर बोल््स – नॉन-फेरस मेटल
204(पाटध 1):1991 टावर बोल््स – फेरस मेटल
15834:2020 पैडलॉक के साथ इस्ट्तेमाल के जलए स्ट्टैनलेस स्ट्टील स्ट्ल ाइडडगं डोर
बोल््स (एल्र ॉप् स)
2681:1993 पैडलॉक के साथ इस्ट्तेमाल के जलए नॉन-फेरस मेटल सस्ट्लाइडडगं
डोर बोल््स (एल् रॉप् स)
281:2009 पैडलॉक के साथ इस्ट्तेमाल के जलए माइल्ड सस्ट्टील स्ट्ल ाइडडगं डोर
बोल््स[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 3
7534:1985 पैडलॉक के साथ इस्ट्तेमाल के जलए स्ट्लाइडडगं लॉककंग बोल््स
1284:1975 सामान् य इंिीजनयररंग प्रयोिनों के जलए रॉट एल्युजमजनयम एलॉय
बोल्ट् और स्ट्क्रू स्ट् टॉक
15833:2009 स्ट्टैनलेस स्ट्टील टावर बोल््स
6623:2004 हाई स्ट्रेंथ स्ट्टृक्चरल न्स
नोट : इस ताजलका के प्रयोिन के जलए, भारतीय मानकों के सबं ंध म ें िारी संिोधनों सजहत उनके नवीनतम संस्ट्करण, िैसा
दक भारतीय मानक ब्यरू ो द्वारा समय-समय पर अजधसूजचत दकए गए ह,ैं ऐसी अजधसूचना की तारीख स ेलागू होंगे।
[फा. सं. पी-29026/1/2023-एलईआई]
संिीव, संयुि सजचव
MINISTRY OF COMMERCE AND INDUSTRY
(Department for Promotion of Industry and Internal Trade)
ORDER
New Delhi, the 21st July, 2023
S.O. 3267(E).—In exercise of the powers conferred by sub-sections (1) and (2) of section 16 read with
section 17 and sub-section (3) of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central
Government, after consulting the Bureau of Indian Standards, is of the opinion that it is necessary or expedient so to
do in the public interest, hereby makes the following Order, namely: -
1. Short title and commencement. - (1) This Order may be called The Bolts, Nuts and Fasteners (Quality
Control) Order, 2023.
(2) It shall come into force with effect from six months from the date of publication of notification:
Provided that for Small Enterprises, as defined under the Micro, Small and Medium Enterprises Development Act,
2006 (27 of 2006), it shall come into force with effect from Nine months from the date of publication of this
notification.
Provided that for Micro Enterprises, as defined under the Micro, Small and Medium Enterprises Development Act,
2006 (27 of 2006), it shall come into force with effect from Twelve months from the date of publication of this
notification.
2. Compulsory use of Standard Mark. - Goods or articles specified in the column (1) of the Table below shall
conform to the corresponding Indian Standard specified in column (2) of the said Table and shall bear the Standard
Mark under a license from the Bureau as per Scheme-1 of Schedule-II of the Bureau of Indian Standards (Conformity
Assessment) Regulations, 2018:
Provided that nothing in this Order shall apply to goods or articles manufactured domestically for export:
Provided further that nothing in this Order shall apply to goods or articles imported as a part of any finished good or
sub-assembly or component:
Provided also that nothing in this Order shall apply to goods or articles imported by domestic manufacturer for
manufacturing products for export:
Provided also that nothing in this Order shall apply to goods or articles manufactured domestically by an enterprise,
registered under "Udyam portal" of the Ministry of Micro, Small and Medium Enterprises, wherein the investment in
plant and machinery or equipment at original cost does not exceed twenty-five lakh rupees and the turnover does not
exceed two crore rupees for the previous financial year as certified by a Chartered Accountant shall be exempted from
implementation of the relevant Quality Control Order.
3. Certification and enforcing authority. - The Bureau shall be the certifying and enforcing authority for the
goods or articles specified in the column (1) of the said Table.
4. Penalty for contravention. – Any person who contravenes the provisions of this Order shall be punishable
under the provisions of the Bureau of Indian Standards Act, 2016.4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
TABLE
Goods or articles Indian Standard Title of Indian Standard
(1) (2) (3)
1363 (Part 1):2019 Hexagon Head Bolts, Screws and Nuts of
product Grade C Hexagon Head Bolts (Size
Range M 5 to M 64)
Bolts, Nuts and Fasteners
1363 (Part 2): 2018 Hexagon Head Screw (Size ranges from M 5 to
M 64)
1363 (Part 3): 2018 Hexagon Head Bolts, Screws and Nuts of
product Grade C - Hexagon Nuts (Size Range
M5 to M64)
1364 (Part 1):2018 Hexagon Head Bolts, Screws and Nuts of
product Grades A and B - Hexagon Head Bolts
(Size Range M 1.6 To M 64)
1364 (Part 2) :2018 Hexagon Head Bolts, Screws and Nuts of
Product Grades A and B - Hexagon Head
Screws (Size Range M 1.6 to M 64)
4621:1975 Indicating Bolts for use in public baths and
lavatories
5187:1972 Flush Bolts
10238:2001 Fasteners - Threaded Steel Fastener - Step
Bolts for Steel Structures
12427:2001 Fasteners - Threaded Steel Fasteners - Hexagon
Head Transmission Tower Bolts
3757:1985 High Strength Structural Bolts
204 (Part 2): 1992 Tower Bolts- Non-ferrous metals
204 (Part 1):1991 Tower Bolts- Ferrous metals
Stainless Steel Sliding Door Bolts (Aldrops) for
use With Padlocks
2681:1993 Non-ferrous metal sliding door bolts (aldrops)
for use with padlocks
281:2009 Mild steel sliding door bolts for use with
padlocks
7534:1985 Sliding locking bolts for use with padlocks
1284:1975 Wrought Aluminium Alloy Bolt and Screw
Stock for General Engineering purposes
15833:2009 Stainless steel Tower Bolts
6623:2004 High Strength Structural Nuts
Note : For the purposes of this Table, the latest version of Indian Standards including the amendments issues thereof,
as notified by the Bureau of Indian Standards from time to time shall apply from the date of such notification.
[F. No. P- 29026/1/2023-LEI]
SANJIV, Jt. Secy.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.