## Report on the Static and Mobile Pressure Vessels Unfired Amendment Rules, 2021
**1. Executive Summary:**
This report analyzes the "Static and Mobile Pressure Vessels Unfired Amendment Rules, 2021," published in the Gazette of India on February 2, 2021. This document amends the existing Static and Mobile Pressure Vessels Unfired Rules, 2016. The key changes introduced by this amendment focus on incorporating ISO Tank Containers into the regulatory framework, clarifying the role of Third-Party Inspection Agencies (TPIA), and streamlining certain procedures and experience requirements. The amendments aim to enhance safety and facilitate the transportation of compressed gases using ISO Tank Containers.
**2. Introduction:**
The purpose of this report is to provide a comprehensive overview of the Static and Mobile Pressure Vessels Unfired Amendment Rules, 2021, based solely on the information presented in the provided policy text. This report aims to inform affected industries about the key changes introduced by this amendment and their potential implications.
**3. Policy Overview:**
* This document amends the **Static and Mobile Pressure Vessels Unfired Rules, 2016**.
* **Core Objective(s):** Based on the text, the core objectives of these amendments are to:
* Incorporate and regulate the use of ISO Tank Containers for the transportation of compressed gases.
* Formalize the role of Third-Party Inspection Agencies (TPIAs) in inspection and certification processes.
* Streamline application and permission processes related to the transportation of compressed gases.
**4. Background and Rationale:**
This is an amendment to an existing policy. The rationale for this specific amendment appears to stem from the increasing use of ISO Tank Containers in the transport of compressed gases. The original 2016 rules seemingly lacked specific provisions for these containers. By incorporating ISO Tank Containers, the amendment aims to ensure their safe handling and transportation under a clear regulatory framework. The inclusion of Third Party Inspection Agencies (TPIA) likely aims to enhance the expertise and independence in the inspection and certification processes, improving safety oversight.
**5. Key Provisions / Changes:**
The following key changes are introduced by the amendment:
* **Definition of ISO Tank Container:** A new definition for "ISO Tank Container" is added, defining it as a tank container complying with ISO 1496 standards, suitable for road, rail, and sea transport of compressed gases (Rule 2). This addition clarifies what vessels the amendment will cover.
* **Definition of Third-Party Inspection Agency (TPIA):** A definition for "Third Party Inspection Agency (TPIA)" is added, specifying that it is a professional organization recognized by the Chief Controller for carrying out inspections, certifications, testing, and safety audits. It also clarifies TPIA must have qualified and experienced personnel, particularly for major accident hazard premises (Rule 2). This clearly codifies the role and prerequisites for these agencies.
* **Inclusion of ISO Tank Container and TPIA in relevant rules:** The terms "ISO Tank Container" and "Third Party Inspection Agency TPIA" are inserted into various rules (Rules 5-9, 13), extending the application of these rules to ISO Tank Containers and involving TPIAs in related processes like inspection and certification by competent persons. This ensures that the new vessels are completely covered by existing regulations.
* **Introduction of Form AS4 and Form LS2A:** New forms (AS4 and LS2A) are introduced for applying for and granting permission to transport compressed gas in ISO Tank Containers by road (Rules 11, 15). This establishes a clear application process for operators.
* **Experience Requirement Adjustment:** The minimum experience requirement for certain personnel is reduced from 10 years to 5 years (Rule 12).
* **Permission for Import Transport of Compressed Gas:** A new form, FORMLS2B, is introduced for seeking permission for the import transport of compressed gas in ISO Tank Containers (Rule 16). This establishes a specific process for importers.
**6. Target Audience and Stakeholders:**
The directly affected target audience and stakeholders include:
* Companies involved in the transportation of compressed gases.
* Owners and operators of Static and Mobile Pressure Vessels.
* Manufacturers and suppliers of ISO Tank Containers.
* Third-Party Inspection Agencies (TPIAs).
* Regulatory bodies responsible for enforcing safety standards in the transportation and storage of compressed gases.
**7. Implementation Aspects (Inferred):**
* **Responsible agency/bodies:** The Chief Controller of Explosives and Controller of Explosives are mentioned as key authorities responsible for granting permissions and enforcing the rules.
* **Timelines:** The notification states that the draft rules will be taken into consideration after thirty days from the date of publication. Permissions granted under the new rules (Form LS2A) are valid for one year.
* **Procedures:** New procedures are introduced for applying for permission to transport compressed gas in ISO Tank Containers (Form AS4), and for granting such permission (Form LS2A).
**8. Expected Outcomes / Impact of Changes:**
The expected outcomes of these changes are:
* **Enhanced Safety:** By incorporating ISO Tank Containers into the regulatory framework and involving TPIAs, the amendments aim to enhance safety in the transportation and handling of compressed gases.
* **Improved Regulatory Clarity:** The new definitions and forms provide greater clarity for operators and regulators, streamlining the application and permission processes.
* **Facilitation of Trade:** By addressing the specific requirements of ISO Tank Containers, the amendments may facilitate the import, export, and domestic transportation of compressed gases.
**9. Conclusion:**
The Static and Mobile Pressure Vessels Unfired Amendment Rules, 2021, represent a significant update to the existing regulatory framework for static and mobile pressure vessels. The amendments focus on incorporating ISO Tank Containers, clarifying the role of TPIAs, and streamlining procedures. These changes are likely to enhance safety, improve regulatory clarity, and facilitate the transportation of compressed gases. It is important for affected industries to carefully review the amended rules and ensure compliance with the new requirements.
Key Entities Referenced
Chief Controller: Authority who issues storage licenses.
New Delhi: Location where the notification was issued.
February 2, 2021: Date of the notification.
Magha 13, 1942: Date according to the Saka calendar corresponding to the notification date.
Central Government: The governing body responsible for drafting the rules.
Explosives Act, 1884: The primary legislation under which the rules are being framed. Specific sections 5, 7, and 18 are referenced.
Static and Mobile Pressure Vessels Unfired Rules, 2016: The rules being amended by this notification.
Shri Sushil K Satpute: Director Explosives at Department for Promotion of Industry and Internal Trade to whom objections or suggestions should be sent.
Department for Promotion of Industry and Internal Trade: Department under Ministry of Commerce and Industry responsible for handling objections to the draft rules.
Ministry of Commerce and Industry: The ministry under which the Department for Promotion of Industry and Internal Trade operates.
Udyog Bhawan, New Delhi 110 011: Address for sending objections to the draft rules.
Static and Mobile Pressure Vessels Unfired Amendment Rules 2021: The new rules being introduced.
ISO Tank Container: A type of tank container suitable for the carriage of compressed gas, defined according to ISO 1496 standards. New rules are being introduced pertaining to this.
ISO 1496: ISO standard which ISO Tank Container complies.
Third Party Inspection Agency TPIA: A professional organization recognized by Chief Controller to carry out inspection, certifications, testing and safety audit of major accident hazards MAH premises.
Manufacture, Storage and Import of Hazardous Chemicals Rules, 1989: Rules under which major accident hazards (MAH) premises are defined.
Indian Territory: Geographical area where permission to transport compressed gas in ISO Tank containers by road is applicable.
Gas Cylinders Rules, 2016: Mentioned with respect to particulars of storage license.
Controller: Authority who issues storage licenses.
FORM AS4: Application proforma for the grant of permission to Transport Compressed gas in ISO Tank containers by Road within Indian Territory.
FORM LS2A: Permission to Transport Compressed Gas in ISO Tank Container by Road within the Indian Territory.
Indian Explosives Act, 1884: Act which governs the transport of compressed gas by ISO Tank Container.
ISO 6348: Standard for markings of ISO Tank Container.
IMDG: International Maritime Dangerous Goods Code. Standard for periodic inspection of ISO Tank Container.
Original Equipment Manufacturer: Repairs of ISO Tank Container shall be carried out by them.
FORMIII: Premises licensed in FORMIII of the SMPVU Rules2016 for product loadingunloading.
FORM LS2B: Proforma for Grant of Permission for Import Transport of Compressed Gas in ISO Tank Container
Sumita Dawra: Addl. Secy.
G.S.R. 1109E, dated the 1st December, 2016: Original Notification of principal rules
G.S.R 388E, dated the 20th April, 2018: Amendment vide notification
G.S.R 148E, dated 25th February, 2019: Amendment vide notification
Government of India Press, Ring Road, Mayapuri, New Delhi 110064: Place of printing
Controller of Publications, Delhi110054: Publisher name
रजजस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
xxxGIDHxxx
सी.जी.-डी.एलxx.x-GअID.-E0x3x0x 22021-224895
CG-DL-E-03022021-224895
ऄसाधारण
EXTRAORDINARY
भाग II—खण् ड 3—ईप-खण्ड (i)
PART II—Section 3—Sub-section (i)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 58] नइ ददल्ली, मगं लवार, फरवरी 2, 2021/माघ 13, 1942
No. 58] NEW DELHI, TUESDAY, FEBRUARY 2, 2021/MAGHA 13, 1942
वाजणज्य और ईद्योग मत्रं ालय
(ईद्योग सवं धनध और अतं ररक व्य ापार जवभाग)
ऄजधसचू ना
नइ ददल् ली 2 फरवरी, 2021
सा.का.जन. 96(ऄ).—जस्ट्थर और गजतिील दाब पात्र (ऄज् वजलत) जनयम, 2016 का संिोधन करन े के
जलए जनम्न जलजखत जनयमों के प्रारूप, जजसे केन्द र सरकार, जवस्ट् फोटक क ऄजधजनयम,1884 (1884 का 4) की धारा 5 तथा 7
द्वारा प्रदत्त िजियों का प्रयोग करते हुए ईक्त ऄजधजनयम की धारा 18 की ईपधारा (1) द्वारा यथा ऄपेजित व्यजियों को
जानकारी के जलए प्रकाजित की जाती ह,ै जजनके ईससे प्रभाजवत होन े की संभावना ह;ै और यह नोरटक स ददया जाता ह ै दक
ईक्त प्रारूप जनयमों पर, जजस तारीख से आस ऄजधसूचना वाले राजपत्र की प्रजतयां जनता को ईपलब् ध करा दी जाती ह,ं
ईससे तीस ददन या ईसके पश् चात जवचार दकया जाएगा;
आन प्रारूप जनयमों के बारे में, अपजत्तयााँ या सुझाव, यदद कोइ ह,ै को श्री सुिील के. सातपूते, जनदेिक
(जवस्ट् फोटक क), ईद्योग संवधधन और अंतररक व् यापार जवभाग, वाजणज् य और ईद्योग मंत्रालय, कमरा न.ं 265, ईद्योग
भवन, नइ ददल् ली– 110001 या इमेलः sushil.satpute@nic.in को उपर जनधाधररत ऄवजध के भीतर भेजे जा सकेंगे ।
ईक्त प्रारूप के बारे म,ें दकसी व् यजि से प्रा् त अपजत्तयााँ या सुझाव, को ईपयुधक् त जवजन्द् टक ऄवजध के भीतर केंर
सरकार द्वारा जवचार दकया जाएगा।
674 GI/2021 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
प्रारूप जनयम
1. संजि्त नाम और प्रारम्भ .–(1) आन जनयमों का संजि् त नाम जस्ट्थर और गजतिील दाब पात्र (ऄज्व जलत) (संिोधन)
जनयम, 2021 होगा।
(2) ये राजपत्र में प्रकािन की तारीख को प्रवृत होंग े ।
2. जस्ट्थर और गजतिील दाब पात्र (ऄज् वजलत) जनयम, 2016 में जनम् नजलजखत संिोधन दकया जाएगा
3. ईक्त जनयम म,ें जनयम 2 म,ें ईप जनयम (xxix) के पश् चात जनम्न जलजखत ऄंतःस्ट्थ ाजपत दकया जाएगा;
“(xxix) (क) अइएसओ टक ंक कंटक ेनर से ऐसा टक ंक कंटक ेनर ऄजभप्रेत ह ै जजसमें दो बुजनयादी तत्व िाजमल हं, पात्र और
ढांचा, जो सड़क, रेल और समरु के द्वारा संपीजडत गैस पररवहन के जलए ईपयिु है, जजसमें पररवहन के आन रूपों
के बीच ऄंतबधदल िाजमल ह,ै और जो अइएसओ 1496 की ऄपिे ाओं का ऄनुपालन करता ह ै”।
4. ईक्त जनयम म,ें जनयम 2 (xl) के पश् चात, जनम्न जलजखत पंजि प्रजतस्ट् थाजपत की जाएगी:-
“(xl) (क) थडध पाटक ी आंस्ट्पेक्िन एजेंसी (टक ीपीअइए) से ऐसा पेिेवर संगठन ऄजभप्रेत ह ै जो मुख्य जनयंत्रक द्वारा
जनरीिण, प्रमाणन, परीिण और खतरनाक रसायन जनमाधण, भंडारण और अयात जनयम, 1989 के तहत
पररभाजित प्रमुख दघु धटक ना खतरों (एमएएच) पररसर की सुरिा ऑजडटक करन े के जलए मान्दयता प्राप्त ह ं और जजसमे
ऐसे व्यजि िाजमल होग ेंजजनके पास सिम व्यजियों के समान योग् यता और ऄनुभव हो”।
5. ईक्त जनयम म,ें जनयम 2 ईप जनयम (xliii) म,ें ‘दाब पात्र’ िब् द के पश् चात जनम्न जलजखत िब्द ऄंतःस्ट् थाजपत दकए
जाएंगे: ऄथाधत-
“,अइएसओ टक ंक कंटक ेनर”
6. ईक्त जनयम म,ें जनयम 18 (2)(xiii) म,ें ‘सिम व् यजि’ िब् दों के पश् चात जनम्न जलजखत िब् द ऄंतःस्ट् थाजपत दकए
जाएंगे: ऄथाधत-
“,थड धपाटक ी आंस्ट्पक्े िन एजेंसी (टक ीपीअइए)”
7. ईक्त जनयम म,ें जनयम 19 (1)(क) और 19(7) म,ें ‘सिम व् यजि’ िब् दों के पश् चात जनम्न जलजखत िब् द ऄंतःस्ट् थाजपत
दकए जाएंगे;
“,थड धपाटक ी आंस्ट्पक्े िन एजेंसी (टक ीपीअइए)”
8. ईक्त जनयम म,ें जनयम 33 म,ें ‘सिम व् यजि’ िब् दों के पश् चात जनम्न जलजखत िब् द ऄंतःस्ट्थ ाजपत दकए जाएंग:े
ऄथाधत-
“,थड धपाटक ी आंस्ट्पक्े िन एजेंसी (टक ीपीअइए)”
9. ईक्त जनयम म,ें जनयम 43 म,ें ‘सिम व् यजि’ िब् दों के पश् चात जनम्न जलजखत िब् द ऄंतःस्ट्थ ाजपत दकए जाएंग:े
ऄथाधत-
“,थड धपाटक ी आंस्ट्पक्े िन एजेंसी (टक ीपीअइए)”
10. ईक्त जनयम म,ें जनयम 49 ईप जनयम (4) म,ें ‘एलएस-2’ िब् द और ऄंक के पश् चात जनम् नजलजखत िब् द और
ऄंक ऄंतःस्ट्थ ाजपत दकए जाएगं :े ऄथाधत-
“,एलएस-2क”
11. ईक्त जनयम म,ें जनयम 50 ईप जनयम (ग) के पश् चात जनम्न जलजखत ऄंतःस्ट् थाजपत दकया जाएगा: ऄथाधत-
“प्ररूप एएस -4 म,ें यदद अवेदन भारतीय िेत्र के भीतर भूजम मागध से अइएसओ टक ंक कंटक ेनर म ें संपीजड़त गैस
पररवहन की ऄनुमजत के संबधं म ें ह ै या अइएसओ टक ंक पोत में संपीजड़त गैस के अयात और पररवहन की
ऄनुमजत ह”ं[भाग II—खण् ड 3(i)] भारत का राजपत्र : ऄसाधारण 3
12. ईक्त जनयम म,ें पररजि्टक IIक म,ें क्र.स.ं 2 म,ें कॉलम 4 म,ें “(1) न्द यनू तम 10 विध का ऄनुभव - ” िब् दों को
“न्द यनू तम 5 विध का ऄनुभव- ” िब् दों को प्रजतस्ट् थाजपत दकया जाएगा।
13. ईक्त जनयम म,ें पररजि्टक III म,ें क्र.स.ं क और 4 म,ें कॉलम 4 म,ें ‘सिम व य् जि’ िब् दों के पश् चात जनम्न जलजखत
िब् द ऄंतःस्ट्थ ाजपत दकए जाएंग,े ऄथाधत:-
“,थड धपाटक ी आंस्ट्पक्े िन एजेंसी (टक ीपीअइए)”
14. ईक्त जनयम म,ें ऄनुसूची 1ख क्र.सं. 14 के पश् चात जनम्न जलजखत ऄंतःस्ट्थ ाजपत दकया जाएगा, ऄथाधत:-
15 भारतीय िेत्र के भीतर भूजम मागध स े अइएसओ टक ंक कंटक ेनरों म ें 5000/ विध
संपीजड़त गैस के पररवहन की ऄनुमजत
15. ईक्त जनयम म,ें प्ररूप एएस-3 के पश् चात जनम्न जलजखत प्ररूप ऄंतःस्ट्थ ाजपत दकया जाएगा, ऄथाधत:-
प्ररूप एएस-4
(जनयम 50 देख)ें
भारतीय सीमा म ेंसड़क द्वारा अइएसओ टक ंक कंटक ेनरों म ेंसपं ीजड़त गसै के पररवहन
की ऄनमु जत के जलए अवदे न प्रोफामाध
1. जजस नाम से ऄनुमजत ऄपजे ित ह ै
i- अवेदक का नाम
ii- अवेदक का पूरा डाक पता
iii- टक ेलीफोन संख् या(ए)ं और इ-मेल
2. एसएमपीवी (यू) जनयम, 2016 और गैस जसलडें र जनयम, 2016 के तहत भंडारण लाआससें का जववरण:
i - मुख्य जनयंत्रक / जनयंत्रक द्वारा जारी दकए गए भंडारण ऄनुज्ञज् त की संख्या और तारीख
ii- ऄनुज्ञज् त की वधै ता - ....................... तक
iii- ईपरोक्त ऄनुज्ञज् त के ऄनुसार भडं ारण की िमता
3. अइएसओ टक ंक कंटक ेनर का जववरण:
i. माजलक कोड और सीररयल नंबर
ii. मॉडल सख्ं या
iii. जवजनमाधता देि का नाम
iv जवजनमाधता का नाम
v. जवजनमाधण का विध
vi ऄनुमोदन देने वाल ेदेि का नाम
vii- जडजाआन ऄनुमोदन के जलए प्राजधकृत जनकाय
viii- दाबपात्र जडजाआन कोड
ix- ऄजधकतम स्ट्वीकाय धवर्ककग दाब (MAWP)
x- परीिण दाब4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
xi- प्रारंजभक दाब परीिण की तारीख
xii- जडजाआन तापमान रेंज
xiii- पात्र के जनमाधण की सामग्री
xiv- िेल और जडि एन्द् स की न्द यूनतम मोटक ाइ
xv- अइएसओ टक ंक कंटक ेनर की जल िमता
xvi- ऄजधकतम ऄनुमेय सकल रव्यमान
xvii- ऄनलडे न टक ेयर रव् यमान
xviii- दकसके द्वारा जनरीिण और परीिण दकया गया
xix- जनधाधररत दाब को िाजमल करते हुए, पात्र में लगे हुए सुरिा वाल् व् स की ब् यौरा
xx- जडजाआन अरेखण
xxi- माईंटटक गड्राआंग
xxii- से भरा हुअ (गैस का ऄसली रासायजनक नाम)
xxiii- यदद रजवत गैस से भरा हुअ ह ैतो ईसका भरण ऄनुपात
xxiv- ऄंजतम हाआड्रोजलक परीिण की जतजथ
4. अइएसओ टक ंक कंटक ेनर के माईन्न्द टक ग के ईेेश्य स ेप्रयोग दकए जाने वाले प्राआम मूवर (रों) का मेक एंड मॉडल
अवेदन की तारीख अवेदक के हस्ट् तािर
अवेदक का डाक पता
अवेदन के साथ जनम्नजलजखत दस्ट्तावेजों के दो सेटक सलं ग् न दकए जाए ं
i- प्रारंजभक जनरीिण प्रमाणपत्र / जनयंत्रण प्रमाणपत्र
ii- मान्दय परीिण और जनरीिण प्रमाण पत्र,यदद लाग ू हो
iii- थडध पाटक ी जनरीिण एजेन्दस ी द्वारा जवजधवत पृ्ठ ांदकत वसे ल जडजाआन ड्राआंग
iv- अइएसओ-कंटक ेनर अदद के जलए माईन्न्द टक ग अरेखण ।
v- एसएमपीवी(यू) जनयम 2016 के जनयम 43 के ऄन्दत गतध जारी प्रमाणपत्र
vi- ऄनुमजत िुल्क रुपए 5000 प्रजतविध
5. ईक्त जनयम म,ें प्ररूप एलएस-2 के पश् चात जनम्न जलजखत प्ररूप ऄंतःस्ट्थ ाजपत दकया जाएगा, ऄथाधत:-
प्ररूप - एलएस -2क
भारतीय सीमा म ेंसड़क द्वारा अइएसओ टक ंक कंटक ेनर म ेंसपं ीजड़त गसै के पररवहन की ऄनमु जत
(जनयम 49 और 50 देख)ें
ऄनुमजत संख् या .................................. िुल् क रुपए 5000 प्रजतविध[भाग II—खण् ड 3(i)] भारत का राजपत्र : ऄसाधारण 5
___________________________________________ को भारतीय जवस्ट्फोटक क ऄजधजनयम, 1884 (1884 का 4)
आसके ऄन्दत गतध बनाए गए जनयमों के प्रावधानों और आस ऄनुमजत की िततों के तहत जनम्न जववरण के ऄनुसार अएसओ टक ंक
द्वारा संपीजड़त गैस के पररवहन के जलए ऄनुमजत प्रदान की जाती ह ै -
अइएसओ टक ंक कंटक ेनर का वणनध
i- माजलक का कोड और क्रम संख्य ा
ii- अइएसओ टक ंक कंटक ेनर का मॉडल नंबर
iii- दकस देि में जवजनर्ममत
iv- जवजनमाधता का नाम
v- ऄजधकतम स्ट्वीकायध व्कग दाब (MAWP)
vi- अइएसओ टक ंक कंटक ेनर की जल िमता
vii- ऄजधकतम ऄनुमेय सकल रव्यमान
viii- मुख्य जवस्ट् फोटक क जनयंत्रक द्वारा ऄनुमोददत माईंटटक ग अरेखण का जववरण
ix- ...............से भरा हुअ (गैस का ऄसली रासायजनक नाम)
x- ऄजधकतम ऄनुमेय पेलोड
xi- प्राआम मूवर(रों) का का मेक और मॉडल
xii- पंजीकृत लदान भार (RLW)
यह ऄनुमजत,जारी होने की तारीख से एक विध तक वैध रहगे ी ।
जारी करन े की ताररख मुख्य जवस्ट् फोटक क जनयंत्रक / जवस्ट् फोटक क जनयंत्रक
यदद वाहन जस्ट्थ र तथा गजतिील दाबपात्र (ऄज् वजलत) जनयम 2016 के ऄध्यायों II और IV की ऄपेिाओं के ऄनुरूप नहीं
पाए जानेया जजन जनयमों एवं िततों के ऄधीन यह ऄनुमजत जारी की गइ है, ईनमें से दकसी का ईल्लंघन होने की दिा म ें यह
ऄनुमजत रे की जा सकती ह ैएवं ऄनुमजत धारक ऄजधजनयम के ऄधीन दण् डनीय होगा ।
ित ें
1. अइएसओ टक ंक कंटक ेनर का ईपयोग ईस संपीजड़त गैस के पररवहन के जलए दकया जाएगा जजसके जलए ऄनुमजत दी
गइ ह ै।
2. लोड वाहन का वजन अइएसओ टक ंक कंटक ेनर पर माईन्न्द टक ग के ईेेश् य से प्रयोग दकए जाने वाले प्रस्ट्त ाजवत वाहन के
अरएलडब्ल्य ू/ जीसीडब्लू / जीवीडब्ल्यू स ेऄजधक नहीं होगा ।
3. अइएसओ टक ंक कंटक ेनर का ईपयोग संपीजड़त गैस के जस्ट्थ र भंडारण ऄजध्ठ ापन के जलए नहीं दकया जाएगा।
4. भारतीय सीमा के ऄन्दद र अइएसओ टक ंक कंटक ेनर के बहुजवध पररवहन के मामल े में–
क माईन्न्द टक ग एवं डी-माईन्न्द टक ग के स्ट्थानों पर ईठाने और बांधन ेकी पयाध् त सुजवधाएं सुजनजचित की जाएंगी।
ख- रेलव/े पत् तन/पोत पररवहन महाजनदेिक/सीमा िुल् क अदद जो भी लाग ू हो के साजं वजधक ऄपेिाओं के
ऄनुपालन का ईत् तरदाजयत् व ऄनुमजत धारक का होगा ।
5- अइएसओ टक ंक कंटक ेनर पर अइएसओ 6348 की ऄपेिाओं के जचहनांकन होगा ।6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
6- IMDG में जवजन्द् टक ानुसार अइएसओ टक ंक कंटक ेनर का अवजधक जनरीिण दकया जाएगा।
7- अइएसओ टक ंक कंटक ेनर की मरम्मत मलू ईपकरण जवजनमाधता द्वारा की जाएगी ।
8- ऄनुमजत पत्र को ऄनुमजत प्राप्त वाहन में हर समय रखा जाएगा और जनयम 70 में जवजन्द् टक ानुसार, दकसी
ऄजधकारी द्वारा मागं े जान े पर प्रस्ट् तुत दकया जाएगा ।
9- ऄनुमजत प्रा् त वाहन चलान े या तत्स म् बन्द धी दकसी भी काय ध के जलए केवल ऐसे जजम् मेदार व्यजियों को ऄनुमजत दी
जाएगी जो ऄनुमजत की िततों के जानकार हों ।
10- ऄनुमजत प्रा् त वाहन के साथ हमेिा एक जजम्मेदार व्यजि तथा संपीजड़त गैस के पररवहन के समय कम से कम दो
व्यजि मौजूद रहगें े।
बिते ऄनुमजत प्राप्त वाहन, यदद खाली हो, तो मुख्य जनयंत्रक या जनयंत्रक द्वारा जलजखत रूप में, ईस
ईेेश्य के जलए स्ट्वीकृत दकए गए स्ट्थान पर जबना दकसी की मौजूदगी के खड़ा दकया जा सकता ह ै।
11- ऄनुमजत प्रा् त वाहन म ेंहमेिा ईपलब् ध रखा जाए –
ए- कम से कम दो पोटक ेबल ऄजग्न िमन यंत्र, जो 9 लीटक र से कम न हों एवं रासायजनक अग बुझाने के जलए ईपयुि
हों;
बी- ज्वलनिील संपीजड़त गैस के पररवहन के जलए ईपयोग दकए जाने वाले वाहन के मामल े में जवद्युत बॉन्न्द डग के
जलए एक मजबूत लचीला केबल; केबल कम से कम 5 मीटक र लंबा होगा और प्रत्येक छोर पर एक ईपयुि क्लंप या
जक्लप होगा।
12- संपीजड़त गैस, मुख्य जनयंत्रक या जनयंत्रक द्वारा जनयमों के ऄन्द तगधत जन्द् टक से ऄनज्ञु ् त पररसर के ऄन्द दर ऄनुमोददत
स्ट् थान के ऄजतररक्त दकसी ऄन्द य स्ट्थ ान परया जब पात्र मय दफटक मेन्द टक लीक,दोिपूणध या ऄन्दयथा ऄसुरजित
हो,अइएसओ टक ंक कंटक ेनर म ें/ से लोड या ऄनलोड नहीं दकया जाएगा ।
बिते दकसी दघु धटक ना या ब्रेक डाईन की जस्ट् थजत में अइएसओ टक ंक कंटक ेनर को सभी सावधाजनयों और पयाधप्त
पयधवेिणके साथदकसी भी ऄन्दय स्ट्थान पर ऄनलोड दकया जा सकता ह ै।
13. दकसी अइएसओ टक ंक कंटक ेनर दकसी भी संपीजड़त गैस को सीधे दकसी भी प्रोसेस पात्र में जडस्ट् चाजध नहीं दकया
जाएगा ।
14. यदद कोइ भी दफटक मेंटक मय पात्र लीक,दोिपूणध या ऄन्दयथा ऄसरु जित हो,ऄनुमजत प्रा् त अइएसओ टक ंक कंटक ेनर लोड
नहीं दकया जाएगा ।
15. ऄनुमजत प्रा् त अइएसओ टक ंक कंटक ेनर म ें/ से संपीजड़त गैस लोड / ऄनलोड करन े से पूवध –
क- आसके आंजन को बंद कर ददया जाएगा और बैटक री को एक ईजचत जस्ट्वच या ऄन्दयथा ऄलग दकया जाएगा;
ख- आसके पजहए ब्रेक द्वारा या स्ट्कैन्चग द्वारा सुरजित दकए जाएंग;े
ग- यदद वाहन ज्वलनिील सपं ीजड़त गैस के पररवहन के जलए ईपयोग दकया जा रहा है, तो आसकी चेजसस को
पाआप के साथ एक केबल द्वारा या जजसमें से आसे लोड या ऄनलोड दकया जाना ह,ै जवद्युत रूप से जोड़ा जाएगा;
घ- दोनों जसरों पर सही प्रकार से भरण या जडस्ट् चाजध पाआप कनेक्िन दकए जाएंग;े
ङ- जब तक लोन्डग या ऄनलोन्डग खत्म न हो जाए एवं वाहन को सील न कर ददया जाए, एक जजम्मेदार व्यजि
साथ में ईपजस्ट्थजत म ेंहोगा ।
16- रैदफक जसग्नलों पर या ऄनुज्ञज्त प्राजधकारी की अवश् यकतानसु ार या जनयमों को लाग ू करने वाल े दकसी ऄन्द य
ऄजधकारी के कह े जान े के ऄजतररक्त ऄनुमजत प्रा् त वाहन दकसी सड़क पर, भीड़भाड़ युक्त स्ट् थान पर या दकसी
ऐसे स्ट्थ ान पर अइएसओ टक ंक कन्दटक ेनर वाहन के लोन्डग एव ं ऄनलोन्डग के जलए जो जनयमों के ऄधीन ऄनज्ञु ज्त
पररसर के ऄन्द दर कोइ स्ट्थ ान नहीं ह,ै नहीं रोका जाएगा ।[भाग II—खण् ड 3(i)] भारत का राजपत्र : ऄसाधारण 7
17- दकसी ज्व लनिीन गैस के पररवहन के जलए के जलए प्रयोग म ें लाए जा रह ेऄनुमजत प्रा् त वाहन पर धू्रपपान, दकसी
भी प्रकार के ऄजग्न का रोतोत या कृजत्रम रोिनी या कोइ वस्ट् तु जो ज्व लनिील वा्प ईत् पन्दन कर सकता ह,ै की
ऄनुमजत नहीं होगी ।
18- ऄनुमजत प्रा् त अइएसओ टक ंक कन्द टक ेनर याजत्रयों को ले जान े के जलए प्रयोग नहीं दकया जाएगा ।
19- ऄनुज्ञ् त प्राजधकारी के जलजखत पूवाधनुमजत के जबनाअइएसओ टक ंक कन्द टक ेनर या ईसके दफटटक ग् स में दकसी तरह का
बदलाव नहीं दकया जाएगा । ऐसे बदलाव ऄनुज्ञज् त म ेंसंिोधन के रूप म ेंपृ्ठ ांदकत होंगे ।
20- अइएसओ टक ंक कन्द टक ेनर के ऄन्दद र घरटक त दकसी दघु धटक ना, ऄजग्न , जवस्ट् फोटक या दकसी ऄजप्रय घटक ना की सूचना संप्रेिण
के िीघ्रगामी साधन द्वारातत्क ाल मुख्य जनयंत्रक/जनयंत्रक, जनकटक मत पुजलस थाना एवं जजला मजजस्ट् रेटक को दी
जाएगी ।
फाम-ध एलएस – 2 ख
अइएसओ टक ंक कंटक ेनर म ेंसपं ीजड़त गसै के अयात और पररवहन के जलए ऄनमु जत
प्रदान करन ेहते ुप्रोफामा ध
(देख ें 49 और 50 रु)
सेवा में,
_____________________
_____________________
जविय : एसएमपीवी (यू) जनयम -2016 के तहत अइएसओ टक ंक कंटक ेनर म ेंसंपीजड़त गैस का अयात और पररवहन।
महोदय,
ईपरोि जविय पर ऄपने पत्र क्रमांक ------- ददनांक -------------- का सन्द दभध ल ें।
अइएसओ कन्द टक ेनर म ें जनम्न जववरण के ऄनुसार ...................... से .............................. जस्ट् थत अपके
फैक्टक री पररसर तक ................... गैस के अयात और पररवहन (और खाली कन्द टक ेनर की वापसी ) के जलए ऄनुमजत प्रदान
की जाती ह ै-
पात्र सम् बन्द धी जववरण -
1. फैजब्रकेटक र का नाम:
2. क्रम संख्या:
3. जडजाआन / वर्ककग प्रेिर:
4. जडजाआन तापमान
5. जनमाधण कोड / प्रकार:
6. पानी की िमता:
7. परीिण और जनरीिण:
8. प्रमाणपत्र संख्या और ददनांक:
9. वजन:
10. सुरिा वाल्व सेटक दाब:
11. जवपुल भंडारण ऄनज्ञु ज् त संख् या:8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
ईपरोि ऄनुमजत जनम्नजलजखत िततों के साथ प्रदान की जाती ह ै-
क- ऄनुमजत केवल अइएसओ कंटक ेनर के एक बार के अयात / जनयाधत के जलए मान्दय ह।ै
ख- अइएसओ टक ंक कंटक ेनर(रों) ) के पररवहन के दौरान सुरिा सावधाजनयों और एसएमपीवी (यू) जनयम -2016 के
सुसंगत प्रावधानों का सख्त ी से ऄनुपालन दकया जाना चाजहए।
ग- यदद लाग ू हो तो वाहन की जनकासी में मख्ु य जवस्ट् फोटक क जनयंत्रक द्वारा ऄनुमोददत स्ट्प ाकध ऄरेस्ट् टक र लगा होना
चाजहए ।
घ- कंटक ेनर की माईंटटक ग / जडमाईंटटक ग का कायध अपके संगठन के एक जजम्मेदार ऄजधकारी की प्रत्यि देखरेख में दकया
जाएगा एवं आस जवभाग द्वारा मान्दयता प्राप्त दकसी सिम व्यजि द्वारा एसएमपीवी(य)ू जनयम 2016 के जनयम 43 के
ऄन्द तगधत सुरिा प्रमाणपत्र जारी दकया जाएगा ।
ङ- पत् तन / पररवहन और संबंजधत ऄन्दय प्राजधकारी स ेअवश्यक ऄनुमजत / मंजूरी / लाआसेंस प्राप्त दकया जाएगा।
च- टक ंक का सकल वजन वाहन के अरएलडब्ल्य ूसे ऄजधक नहीं होगा ।
छ- ईत्पाद केवल एसएमपीवी(यू) जनयम -2016 के प्ररूप - III में ऄनुज्ञ् त पररसर म ें ही लोड / ऄनलोड दकया
जाएगा।
ज- अइएसओ कंटक ेनर को भरने / खाली करने के बाद अइएसओ कंटक ेनर की वापसी के जलए दस्ट्तावेजी साक्ष्य प्रस्ट्तुत
करें।
ईपरोि ऄनुमजत सुरिा के जहत में और िततों के ईल्ल ंघन की दिा म,ेंअवश्यक होने पर दकसी भी समय की
समीिा, संिोधन दकया जा सकता ह ैऔर वापस जलया जा सकता ह।ै
आस पत्र के जारी होन ेकी तारीख स ेएक वि धकी ऄवजध के जलए ईपरोि ऄनमु जत ऄन्दयथा मान्दय ह।ै
भवदीय
कृते मुख्य जवस्ट् फोटक क जनयंत्रक
[फा. स.ं 2(1)/2017-Expl]
सुजमता डावरा, ऄपर सजचव
पदनाम
नोटक : मूल जनयम, भारत के राजपत्र, ऄसाधारण, भाग II, खण् ड 3, ईप-खण् ड (i) में ऄजधसूचना स.ं सा.का.जन.
1109(ऄ), तारीख 1 ददसम्बर, 2016 द्वारा प्रकाजित दकए गए थे और बाद म ें सा.का.जन. 388(ऄ) तारीख
20 ऄप्रैल, 2018 और सा.का.जन. 148(ऄ) तारीख 25 फरवरी, 2019 द्वारा संिोजधत दकया गया।
MINISTRY OF COMMERCE AND INDUSTRY
(Department for Promotion of Industry and Internal Trade)
NOTIFICATION
New Delhi, the 2nd February, 2021
G.S.R. 96(E).—The draft of the following rules further to amend the Static and Mobile Pressure
Vessels (Unfired) Rules, 2016 which the Central Government proposes to make in exercise of the powers
conferred by section 5 and 7 of the Explosives Act, 1884 (4 of 1884), is hereby published as required by
sub-section (I) of section 18 of the said Act for information of all persons likely to be affected thereby; and[भाग II—खण् ड 3(i)] भारत का राजपत्र : ऄसाधारण 9
notice is hereby given that the said draft rules shall be taken into consideration after thirty days from the
date on which the copies of this notification as published in the Official Gazette are made available to the
public;
Objections or suggestions, if any, to these draft rules may be sent to the Shri Sushil K Satpute,
Director (Explosives), Department for Promotion of Industry and Internal Trade, Ministry of Commerce
and Industry, Room No 265 Udyog Bhawan, New Delhi – 110 011 or sent by email (sushil.satpute@nic.in)
within the period specified above;
The objections or suggestions which may be received from any person with respect to the said draft
rules, within the period so specified will be considered by the Central Government.
Draft Rules
1. Short title and commencement-(1) these rules may be called the Static and Mobile Pressure
Vessels (Unfired) (Amendment) Rules 2021.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. In the Static and Mobile Pressure Vessels (U) Rules, 2016 following may be amended
3. In the said Rules in Rule 2 after sub rule (xxix) following shall be inserted namely;
―(xxix)(a) ISO Tank Container means tank container which includes two basic elements, the vessel
and the framework, suitable for the carriage of compressed gas for conveyance by road, rail and
sea, including interchange between these forms of transport and complies with requirements of
ISO 1496‖
4. In the said Rules, in Rule 2 after(xl), the following lines to be added:-
(xl) (a) Third Party Inspection Agency (TPIA) means a professional organization recognized by
Chief Controller to carry out inspection, certifications, testing and safety audit of major accident
hazards (MAH) premises as defined under Manufacture, Storage and Import of Hazardous
Chemicals Rules, 1989, and having persons with qualifications and experience as applicable to the
competent persons.
5. In the said Rules in Rule 2 sub rule (xIiii) after the word pressure vessel following words shall be
inserted namely;
―,ISO Tank Container‖
6. In the said Rules, in the rule 18 (2) (xiii) after the word ―competent person‖ the following words
shall be inserted, namely: -
―, Third party inspection agency (TPIA)‖.
7. In the said Rules, in the rule 19 (1) (a) and 19 (7) after the word ―competent person‖ the following
words shall be inserted, namely: -
―, Third party inspection agency (TPIA)‖.
8. In the said Rules,in the rule 33 after the word ―competent person‖ the following words shall be
inserted, namely: -
―, Third party inspection agency (TPIA)‖.
9. In the said Rules, in the rule 43 after the word ―competent person‖ the following words shall be
inserted, namely: -
―, Third party inspection agency (TPIA)‖.
10. In the said Rules, in the rule 49 sub rule (4) after the words & figure LS-2. Following words and
figure shall be inserted namely;
―LS-2A‖
11. In the said Rules in Rule 50 after sub rule (c) following shall be inserted namely;10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
―In Form AS-4, if the application is in respect of permission to transport compressed gas in ISO
Tank Container by Road within the Indian Territory or to grant permission for Import & Transport
of Compressed Gas in ISO Tank Container‖
12. In the said Rules, in Appendix IIA, at Sl. No. 2, in column 4 the words ―(1) A minimum
experience of 10 years in –’’ shall be substituted with
―(1) A minimum experience of 5 years in –’’
13. In the said Rules, in Appendix III, at Sl. No. A &4, after the word ―competent person‖ the
following words shall be inserted, namely: -
―, Third party inspection agency (TPIA)‖.
14. In the said Rules in Schedule IB after Sl No. 14 following shall be inserted namely;
Grant of permission to Transport Compressed gas in ISO Tank
15 5000/Year
containers by Road within the Indian Territory
15. In the said Rules after Form AS-3 following Form shall be inserted namely;
FORM AS-4
(See Rule 50)
Application proforma for the grant of permission to Transport Compressed gas in ISO Tank
containers by Road within Indian Territory
1. Name in which permission required
i. Applicant’s calling
ii. Applicant’s full postal address
iii. Telephone No(s) and E-mail
2. Particulars of storage licence under SMPV(U) Rules, 2016 & Gas Cylinders Rules, 2016 :
i. Number and date of storage licence issued by the Chief Controller/Controller
ii. Validity of licenceupto
iii. Capacity of storage as per above licence
3. Description of the ISO Tank container :
i. Owners code & Serial Number
ii. Model Number
iii. Country of manufacture
iv. Name of the Manufacturer
v. Year of Manufacture
vi. Approval country
vii. Authorized body for design approval
viii. Pressure Vessel Design Code
ix. Maximum Allowable Working Pressure(MAWP)
x. Test Pressure
xi. Initial Pressure Test Date
xii. Design Temperature Range[भाग II—खण् ड 3(i)] भारत का राजपत्र : ऄसाधारण 11
xiii. Material of construction of vessel
xiv. Nominal thickness of shell and dish ends
xv. ISO tank container Water capacity
xvi. Maximum permissible gross mass
xvii. Unladen tare mass
xviii. Inspected and tested by
xix. Specification of the safety valves fitted to the vessel including set pressure
xx. Design drawing
xxi. Mounting drawing
xxii. Filled with (True chemical name of the gas)
xxiii. Filling ratio, if filled with a liquefiable gas
xxiv. Date of last hydraulic test
4. Make and Model of Prime Mover(s) to be used
for ISO Tank Container mounting purpose
Date of application Signature of applicant
Postal address of the applicant
Application shall accompany two sets of following documents
i. Initial inspection certificate / Certificate of Control
ii. Valid test and inspection certificates if applicable
iii. Vessel design drawing, duly endorsed by third party inspecting agency
iv. Mounting drawing for ISO-container, etc..
v. Certificates issued under Rule - 43 of SMPV (U) Rules, 2016.
vi. Permission Fee Rs.5000/Year
5. In the said Rules after the Form LS-2 following Form shall be inserted namely;
FORM-LS-2A
Permission to Transport Compressed Gas in ISO Tank Container by Road within the Indian
Territory
(See Rule 49 & 50)
Permission No.____________________ Fee Rs. 5000/Year
Permission is hereby granted to ___________________________________________ to transport
compressed gas by the ISO Tank Container as described below subject to the provisions of the Indian
Explosives Act, 1884 (4 of 1884) and the rules made there under and to the further conditions of this
Permission.
DESCRIPTION OF THE ISO TANK CONTAINER
i. Owners code & Serial Number
ii. ISO Tank Container Model Number
iii. Country of manufacture12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
iv. Name of the Manufacturer
v. Maximum Allowable Working Pressure(MAWP)
vi. ISO tank container Water capacity
vii. Maximum permissible gross mass
viii. CCOE approved Mounting drawing details
ix. Filled with (True chemical name of the gas)
x. Maximum permissible Payload
xi. Make and Model of Prime Mover(s)
xii. Registered Laden Weight (RLW)
This Permission will remain valid up to one year from date of grant of permission
Date of Issue: Chief Controller of Explosives/Controller of Explosives
This Permission is liable to be cancelled if the Permitted vehicle is not found conforming to the
requirements of chapters II and IV of the Static and Mobile Pressure Vessels (Unfired) Rules 2016, or for
the contravention of any of the said rules and conditions under which this Permission is granted and the
holder of this Permission is also punishable under the Act
CONDITIONS
1. ISO Tank Container shall be used for transportation of compressed gas for which permission is
granted
2. Loaded vehicle weight shall not be more than RLW/GCW/GVW of the vehicle proposed to be used
for ISO Tank Container mounting purpose
3. ISO Tank Container shall not be used for static storage installation for compressed gas
4. In case of multimodal transportation of ISO Tank container within the Indian Territory
a. adequate lifting and tie-down facilities shall be ensured at mounting and demounting locations
b. Permission holder shall be responsible for compliance of statutory requirements of
Railways/Ports/ Director General of Shipping/ Customs etc., as applicable.
5. ISO Tank Container shall bear Markings as per the requirements of ISO 6348
6. Periodic inspection of ISO Tank Container shall be carried out as specified in IMDG
7. Repair of ISO Tank Container shall be carried out by Original Equipment Manufacturer
8. The permission letter shall be kept at all times in the permitted vehicle and produced on demand by
an officer specified in Rule 70.
9. Only responsible persons who are conversant with the conditions of this permission shall be
employed for driving the Permitted vehicle or attending to it.
10. The Permitted vehicle shall be constantly attended to by a responsible person and by at least two
persons while it is transporting compressed gas:
Provided that the permitted vehicle may, if empty, be kept unattended in a place approved for the
purpose, in writing, by the Chief Controller or Controller.
11. The permitted vehicle shall at all times carry –
a. at least two portable fire extinguishers of capacity not less than 9 litres and suitable for
extinguishing chemical fires;
b. a strong flexible cable for electrical bonding in case of vehicle used for transportation of
flammable compressed gas; the cable shall be at least 5 metres long and shall have at each end
a suitable clamp or clip.
12. The compressed gas shall not be loaded or unloaded in/from ISO Tank Container except in a place
which is approved within the premises licensed for the purpose under the rules by the Chief
Controller or Controller or when the fitments including vessel becomes leaky, defective or
otherwise insecure.[भाग II—खण् ड 3(i)] भारत का राजपत्र : ऄसाधारण 13
Provided that the permitted ISO Tank Container may be unloaded at any other place with all the
precautions and under adequate supervision if such unloading is necessitated by an accident or break
down.
13. No ISO Tank Container shall discharge any compressed gas directly into any process vessel.
14. The permitted ISO Tank Container shall not be loaded if any of the fitments including vessel
becomes leaky, defective or otherwise insecure.
15. Before compressed gas is loaded into or unloaded from the permitted ISO Tank Container –
a. its engine shall be stopped and the battery shall be isolated by a proper switch or otherwise;
b. its wheels shall be secured by brakes or by scotching;
c. its chassis shall be electrically bonded by a cable with the pipe into or from which it is to be
loaded or unloaded, in case of vehicle used for transportation of flammable compressed gas;
d. the correct filling or discharge pipe connections are made at both ends;
e. a responsible person shall be in attendance and remain so until loading or unloading is over
and the vehicle has been sealed.
16. Except when called upon by traffic signals or required by the licensing authority or any other
officer entrusted with the job of enforcing the rules, the permitted vehicle shall not stop on any
road, congested area or a place which is not a place situated within the premises licensed under the
rules for the loading and unloading of ISO Tank Container vehicle.
17. No smoking and no fire or artificial light or any article capable of igniting flammable vapour shall
be allowed on the permitted vehicle used for the transportation of any flammable gas.
18. The permitted ISO Tank Container vehicle shall not be used for carrying passengers.
19. No alteration in the permitted ISO Tank Container or its safety fittings shall be carried out without
previous sanction in writing of the licensing authority. Such alteration so sanctioned shall be
endorsed on the licence by an amendment.
20. Any accident, fire, explosion or untoward incident occurred within the permitted ISO Tank
Container vehicle shall be immediately reported to the Chief Controller, Controller, nearest police
station and District Magistrate by quickest mode of communication.
FORM-LS-2B
Proforma for Grant of Permission for Import & Transport of Compressed Gas in ISO Tank
Container
(See Rule 49 & 50)
To,
_____________________
_____________________
Sub: Import & transport of Compressed Gas in ISO tank Container under SMPV (U) Rules-2016.
Sir,
Please refer to your letter No. ------- Dated --------------on the above subject.
Permission is hereby accorded for the import and transport _______gas from ----------------, to your factory
premises at ------------------------ (and return of empty container) in ISO- container as per the details
furnished below:
VESSEL PARTICULARS:
1. Name of the Fabricator :
2. Serial No. :
3. Design/Working Pressure :14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
4. Design Temperature
5. Fabrication Code/Type :
6. Water Capacity :
7. Test & Inspection :
8. Certificate No.& date.
9. Weight :
10. Safety Valve Set Pressure :
11. Bulk Storage Licence No. :
The above permission is accorded subject to the following conditions:-
a. The permission is valid only for one time import/export of ISO container.
b. safety precautions and relevant provisions of the SMPV(U) Rules-2016 should be strictly complied
with during transportation of the ISO Tank Container(s).
c. The exhaust of the vehicle shall be fitted with a spark Arrestor of a make approved by the Chief
Controller of Explosives if applicable
d. The mounting/demounting of the container shall be carried out under the direct supervision of a
responsible officer of your Organization and a Safety Certificate under rule 43 issued under
SMPV(U) Rules 2016 by a competent person duly recognized by this Department.
e. Necessary permission/ clearance/licences shall be obtained from Port/Transport and any other
authority concerned.
f. The gross weight of the tank shall not exceed the RLW of the vehicle
g. Product shall be loaded/unloaded only in the premises licensed in FORM-III of the SMPV(U)
Rules-2016.
h. Please submit documentary evidence for return of ISO container after filling/emptying of ISO
Container.
The above permission may be reviewed, amended and withdrawn at any time, if considered necessary in
the interest of safety and contravention of conditions.
The above permission is otherwise valid for a period of ONE YEAR from the date of issue of this
letter.
Yours faithfully,
For Chief Controller of Explosives
[F. No. 2(1)/2017-Expl]
SUMITA DAWRA, Addl. Secy.
Note : The principal rules were published in the Gazette of India, Extraordinary, Part-II, Section 3,
Sub-section (i) vide notification G.S.R. 1109(E), dated the 1st December, 2016, subsequently
amended vide G.S.R 388(E), dated the 20th April, 2018 and G.S.R 148(E), dated
25th February, 2019.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.