## Report on the Plastic Waste Management Amendment Rules, 2021
**1. Executive Summary:**
This report analyzes the Plastic Waste Management Amendment Rules, 2021, as published in the Gazette of India on August 12, 2021. This amendment modifies the Plastic Waste Management Rules, 2016, with a core purpose of strengthening the regulatory framework around plastic waste management. Key changes include the expansion of the definition of stakeholders, revisions to thickness requirements for plastic carry bags, the introduction of a ban on certain single-use plastic items, and the inclusion of provisions for nonwoven plastic bags. This amendment aims to reduce plastic pollution and promote sustainable waste management practices.
**2. Introduction:**
This report provides an informative overview of the Plastic Waste Management Amendment Rules, 2021, based solely on the official gazette notification provided. The report aims to inform affected industries about the key changes introduced and their potential implications.
**3. Policy Overview:**
This document amends the Plastic Waste Management Rules, 2016. The core objective, inferred from the text, is to strengthen the existing regulatory framework for managing plastic waste and reducing plastic pollution by introducing new definitions, restrictions, and responsibilities.
**4. Background and Rationale:**
The amendment likely stems from a need to address gaps or inadequacies in the original Plastic Waste Management Rules, 2016. The specific issues addressed by this amendment, as inferred from the text, include:
* **Broadening Stakeholder Responsibilities:** Expanding the scope of responsibility beyond importers to include brand owners, plastic waste processors, recyclers, and co-processors.
* **Increasing Minimum Thickness for Plastic Carry Bags:** Addressing the environmental impact of thin plastic bags by increasing the minimum thickness requirements in a phased manner.
* **Phasing Out Single-Use Plastics:** Tackling the proliferation of single-use plastics by banning the manufacture, import, stocking, distribution, sale, and use of certain identified items.
* **Regulating Nonwoven Plastic Bags:** Introducing specific standards for nonwoven plastic bags.
**5. Key Provisions / Changes:**
The Plastic Waste Management Amendment Rules, 2021, introduce the following key changes:
* **Rule 2 Amendment:** Expands the definition of stakeholders to include "brandowner, plastic waste processor recycler, coprocessor, etc." after "Importers" in subrule 1. This broadens the scope of entities responsible under the rules.
* **Rule 3 Amendment:** Introduces definitions for:
* "Nonwoven plastic bag": Defines this type of bag, specifying its composition and manufacturing process.
* "Plastic waste processing": Defines the handling of plastic waste for reuse, recycling, coprocessing, or transformation.
* "Single-use plastic commodity": Defines a plastic item intended for single use before disposal or recycling.
* "Thermoset plastic": Defines a plastic that becomes irreversibly rigid when heated.
* "Thermoplastic": Defines a plastic that softens on heating and can be moulded.
* **Rule 4 Amendment:**
* Substitutes "importer stocking" with "import, stocking" in subrule 1(i).
* Replaces "fifty microns in thickness" with a phased increase in minimum thickness for plastic carry bags: "seventy five microns in thickness with effect from the 30th September, 2021and one hundred and twenty 120 microns in thickness with effect from the 31st December, 2022" in subrule 1(ii). This aims to reduce the overall volume of plastic waste generated.
* Inserts "and commodities" after "carry bags" and "or commodities or both" after "compostable plastic carry bags" in subrule 1(iii) and (iv), respectively.
* Inserts a new clause (j) requiring nonwoven plastic carry bags to be no less than "60 Gram Per Square Meter GSM with effect from the 30th September, 2021."
* Inserts new subrules (2, 3, and 4):
* Subrule 2 introduces a ban on the manufacture, import, stocking, distribution, sale, and use of specific single-use plastic items, including ear buds, plastic sticks for balloons, plastic flags, candy sticks, ice cream sticks, polystyrene (thermocol) for decoration, plates, cups, glasses, cutlery, straws, trays, wrapping films around sweet boxes, invitation cards, cigarette packets, banners less than 100 micron, and stirrers, effective July 1, 2022.
* Subrule 3 exempts commodities made of compostable plastic from the single-use plastic ban.
* Subrule 4 states that future notifications prohibiting carry bags, plastic sheets, multi-layered packaging, or single-use plastic will come into force after ten years from the date of their publication.
* **Rule 5 Amendment:** Substitutes "2000" with "2016" in subrule 1(d).
* **Rule 6 Amendment:** Inserts a clause (aa) to ensure adherence to the amended rules.
* **Rule 7 Amendment:** Inserts a clause (aa) to ensure adherence to the amended rules.
* **Rule 9 Amendment:** Inserts "as per guidelines issued under these rules from time to time" after "local body concerned."
* **Rule 11 Amendment:** Inserts "plastic packaging" after "plastic carry bag"; includes "producer or brand owner"; excludes "multilayered packaging used for imported goods"; and requires the name and certificate number "of producer" on packaging.
* **Rule 12 Amendment:** Inserts "restriction or prohibition on" after "waste generator".
* **Rule 13 Amendment:** Inserts "or the Central Pollution Control Board" after "Union Territory concerned".
**6. Target Audience and Stakeholders:**
Based on the text, the primary target audience and stakeholders affected by these amendments include:
* Manufacturers, importers, and distributors of plastic carry bags and single-use plastic items.
* Brand owners using plastic packaging.
* Plastic waste processors, recyclers, and co-processors.
* Local bodies responsible for waste management.
* Consumers of the targeted single-use plastic items.
**7. Implementation Aspects (Inferred):**
* **Responsible Agency/Bodies:** The Central Government (Ministry of Environment, Forest and Climate Change) and the Central Pollution Control Board (CPCB) have oversight. Local bodies are responsible for implementation at the local level.
* **Timelines:** The amendment specifies timelines for increasing the minimum thickness of plastic carry bags (September 30, 2021, and December 31, 2022) and for the ban on single-use plastics (July 1, 2022).
* **Enforcement:** Ensuring adherence to the amended rules is the responsibility of the authorities mentioned.
**8. Expected Outcomes / Impact of Changes:**
The likely intended outcomes of these specific changes include:
* **Reduced Plastic Waste Generation:** Increasing the minimum thickness of plastic carry bags and banning single-use plastic items are expected to reduce the overall volume of plastic waste generated.
* **Improved Waste Management:** Enhanced definitions and stakeholder responsibilities should improve the efficiency of plastic waste collection, processing, and recycling.
* **Environmental Protection:** Reducing plastic pollution and promoting sustainable alternatives are the ultimate goals, contributing to a cleaner environment.
**9. Conclusion:**
The Plastic Waste Management Amendment Rules, 2021, represent a significant step towards strengthening the regulatory framework for plastic waste management in India. By expanding stakeholder responsibilities, increasing minimum thickness standards, banning specific single-use plastics, and including nonwoven plastic bags regulations, this amendment is likely to have a substantial impact on the industry. Affected stakeholders should carefully review the changes and ensure compliance to avoid penalties and contribute to a more sustainable future.
Key Entities Referenced
Plastics Waste Management Rules, 2016: A set of rules pertaining to the management of plastic waste in India. These rules are being amended by the notification.
Environment Protection Act 1986: An act of the Parliament of India. The notification references sections 6, 8 and 25 of this act as the source of power for the amendments.
Plastic Waste Management Amendment Rules, 2021: The name given to the amended rules being introduced by this notification.
Central Government: The government of India, responsible for making and enforcing the Plastic Waste Management Amendment Rules, 2021.
Official Gazette: The official government publication where the amended rules will be published, marking their entry into force.
Nonwoven plastic bag: A type of plastic bag defined in the amendment, specifying its composition and structure.
Singleuse plastic commodity: A plastic item intended to be used once for the same purpose before being disposed of or recycled
Thermoset plastic: A plastic which becomes irreversibly rigid when heated and hence cannot be remoulded into desired shape
Thermoplastic: A plastic which softens on heating and can be moulded into desired shape
Central Pollution Control Board: A governmental organization referenced in the document related to implementation of the rules within Union Territories.
New Delhi: The city in India where the Ministry of Environment, Forest and Climate Change issued the notification.
Ministry of Environment, Forest and Climate Change: The Indian government ministry responsible for issuing the notification regarding the Plastic Waste Management Rules.
11th March, 2021: Date of publication of the draft rules in the Gazette of India, Extraordinary.
1st July, 2022: The effective date for the ban on manufacture, import, stocking, distribution, sale and use of certain single use plastics
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
xxxGIDHxxx
सी.जी.-डी.एxलx.x-GअID.-E1x2xx0 82021-228947
CG-DL-E-12082021-228947
असाधारण
EXTRAORDINARY
भाग II—खण्ड 3—उप-खण्ड (i)
PART II—Section 3—Sub-section (i)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 459] नई ददल्ली, बहृ स्ट्प जतवार, अगस्ट्त 12, 2021/श्रावण 21, 1943
No. 459] NEW DELHI, THURSDAY, AUGUST 12, 2021/SHRAVANA 21, 1943
पयावा रण, वन और िलवाय ुपररवतना मत्रं ालय
अजधसचू ना
नई ददल् ली, 12 अगस्ट् त, 2021
सा.का.जन. 571(अ).—प् लाजस्ट्टक अपजिष्ट प्रबंधन जनयम, 2016 को संिोधन करने के जलए भारत के रािपत्र,
असाधारण म ें अजधसूचना संख् या सा.का.जन. 169 (अ) द्वारा तारीख 11 माच,ा 2021 म ें प्रारूप जनयम प्रकाजित दकए गए
थ,े जिसम ें उन सभी लोगों स,े िो उन जनयमों स े प्रभाजवत हो सकते ह,ैं उक्त प्रारूप जनयम को अंतर्ववष्ट करने वाले रािपत्र
की प्रजतया ं िनता को उपलब्ध कराए िाने की तारीख स े साठ ददन की अवजध के भीतर आक्षपे और सझु ाव आमंजत्रत दकए
गए थ;े
और, उक्त प्रारूप जनयमों को अंतर्ववष्ठ करने वाले रािपत्र की प्रजतयां िनता को तारीख 11 माच,ा 2021 को
उपलब् ध कराई गई थी;
और, उपयुाक् त अवजध के भीतर प्राप् त आक्षेपों और सझु ावों पर केंद्रीय सरकार द्वारा सम् यक रूप स े जवचार दकया
गया ह;ै
अत:, अब केन्द द्रीय सरकार पयावा रण (सरं क्षण) अजधजनयम, 1986 (1986 का 29) की धारा 6, धारा 8 और धारा
25 द्वारा प्रदत् त िजियों का प्रयोग करते हुए, एतद्द्वारा प्ल ाजस्ट्टक अपजिष्ट प्रबंधन जनयम, 2016 म ें संिोधन करने के जलए
जनम्न जलजखत जनयम बनाती ह,ै अथाात:्-
1. (1) इन जनयमों का संजक्षप् त नाम प्ल ाजस्ट्टक अपजिष्ट प्रबंधन (संिोधन) जनयम, 2021 कहा ह।ै
(2) वे रािपत्र म ें उनके प्रकािन की तारीख को प्रवृत्त होंगे।
4497 GI/2021 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
2. प् लाजस्ट्टक अपजिष्ट प्रबंधन जनयम, 2016 (इसम ें इसके पश् चात् उक्त जनयमों को कहा गया ह)ै म,ें जनयम 2 म,ें
उप-जनयम (1) म,ें ‘‘आयातकों’’ िब् द के पश् चात् ‘‘ब्राण् ड स्ट्व ामी, प् लाजस्ट्टक अपजिष्ट प्रसंस्ट् करणकताा (पुनचाक्रक, सह-
प्रसंस्ट् करणकता ा आदद)’’ िब द् अतं :स थ् ाजपत दकया िाएगा।
उक्त जनयमों म,ें जनयम 3 म ें–
(i) खंड (ढ) के पश् चात, जनम्न जलजखत खंड अंत:स्ट्थ ाजपत दकया िाएगा, अथाता ् -
‘(ढ क) “जबना बुने प् लाजस्ट्टक बैग” – स े अजभप्रेत ह ै िो यांजत्रक अथवा थमाल अथवा रासायजनक साधनों द्वारा एक-साथ बंध े
हुए िरटल प् लाजस्ट्टक फाइबरों या तंतओंु (और जिदद्रत दफल् मों द्वारा) की प्ल ाजस्ट्टक की िीट अथवा वेब आकार के कपडे स े
बने हुए जबना बुने प् लाजस्ट्टक के बैग और “जबना बुने कपडे” स े अजभप्रेत ह ैजिसम ें एक समतल अथवा गुच्ि ेदार जिद्रयुक् त िीट
िो सीधे प् लाजस्ट्टक फाइबरों, जपघल े हुए प्ल ाजस्ट्टक अथवा प् लाजस्ट्टक की दफल् मों स ेबनाया िाता ह;ै
(ii) खंड (थ) के पश् चात, जनम्न जलजखत खडं अंत:स्ट् थाजपत दकया िाएगा, अथाात ्-
‘(थ क) “प् लाजस्ट्टक अपजिष्ट प्रसंस्ट् करण” – स े अजभप्रेत ह ै जिससे कोई ऐसी प्रदक्रया जिसके द्वारा प् लाजस्ट्टक अपजिष्ट को
पुन:उपयोग, पुनचाक्रण, सह-प्रसंस्ट् करण अथवा नए उत् पादों म ें पररवतान के प्रयोिन के जलए प्रब ंजधत दकया िाता ह;ै ’;
(iii) खंड (फ) के पश् चात, जनम्न जलजखत खंड अंत:स्ट्थ ाजपत दकया िाएगा, अथाता ् -
‘(फ क) “एकल प्रयोग प्ल ाजस्ट्टक स े बनी वस्ट्त ”ु का अथ ा ह ै – जिससे प् लाजस्ट्टक की मद, जिसके जनपटान अथवा पुनचाक्रण स े
पहले उस े एक ही प्रयोिन के जलए एक बार ही उपयोग दकया िाना ह;ै
(फ ख) “थमोसेट प् लाजस्ट्टक” स े अजभप्रेत ह ै जिसम ें ऐसा प् लाजस्ट्टक िो गम ा करने पर अपररवतानीय रूप स े कठोर हो िाता ह ै
और इसजलए इस े वांजित आकार म ेंनहीं बदला िा सकता ह;ै
(फ ग) “थमोप् लाजस्ट्टक” स े अजभप्रेत ह ै जिसम ें ऐसा प्ल ाजस्ट्टक िो गम ा करन े पर नरम हो िाता ह ै और इस े वांजित आकार म ें
ढाला िा सकता ह;ै’
4. उक्त जनयमों म,ें जनयम 4 म ें–
(क) उप-जनयम (1) म,ें - (i) “आयातक भंडारण” िब् दों के स्ट्थ ान पर “आयात, भंडारण” िब् द रखें िाएंग;े
(ii) खंड (ग) म,ें “पचास माइक्रोन की मोटाई”, िब् दों के स्ट् थान पर, िब् द आंकडे, अक्षर और कोष्ठ क “30 जसतम्ब र
2021 स े पचहत् तर माइक्रोन की मोटाई और 31 ददसम् बर, 2022 स े एक सौ बीस (120) माइक्रोन की मोटाई” िब् द रख े
िाएंगे;
(iii) खंड (ि), “कैरी बैगों”, िब् दों के बाद, “और वस्ट् त”ु िब् द अ तं र्ववष्ट दकए िाएंग;े
(iv) खंड (ि), “कंपोस्ट् ट योग् य प्ल ाजस्ट्टक कैरी बैगों”, िब् दों के बाद, “या वस्ट् तु या दोनों“ िब् द अ तं र्ववष्ट दकए िाएंग;े
(v) खंड (झ) के पश् चात, जनम्न जलजखत खंड अंत:स्ट्थ ाजपत दकया िाएगा, अथाता ् -
“(ञ) 30 जसतम्ब र, 2021 की तारीख स े गरै -बुना हुआ प्ल ाजस्ट्टक कैरी बैग 60 ग्राम प्रजत वग ा मीटर (िीएसएम) स े कम नहीं
होगा।”;
(ख) उप-जनयम (1) के पश् चात, जनम्न जलजखत उप-जनयम अंत:स्ट् थाजपत दकया िाएगा, अथाात ्-
“(2)” 1 िुलाई, 2022 की तारीख स े पोलीस्ट् टाइरीन और जवस्ट् ताररत पोलीस्ट् टाइरीन वस्ट् तओंु सजहत जनम्न जलजखत एकल-
प्रयोग-प् लाजस्ट्टक वस्ट् तओंु के जवजनमााण, आयात, भंडारण, जवतरण, जबक्री और उपयोग का जनषधे दकया िाएगा:-
(क) प्ल ाजस्ट्टक जस्ट्टक युक् त ईयर बड्स, गुब् बारों के जलए प् लाजस्ट्टक की डंजडया, प् लाजस्ट्टक के झडं े, कैंडी जस्ट्टक, आइसक्रीम की
डंजडया, पोलीस्ट् टाइरीन (थमोकोल) की सिावटी सामग्री;
(ख) प् लेटें, कप, जगलास, कांटे, चम् मच, चाकू, स्ट् रॉ, रे िैसे कटलरी, जमठाई के जडब् बों के इद-ा जगद ा लपेटन े या पैक करन े
वाली दफल् म,ें जनमंत्रण काडा और जसगरेट पैकेट, 100 माइक्रोन स े कम मोटाई वाले प्ल ाजस्ट्टक या पीवीसी बैनर, जस्ट्रर।
(3) उप-जनयम (2) (ख) के उपाबंध, कंपोस्ट् ट योग् य प् लाजस्ट्टक स े बनी हुई वस्ट्त ुओं पर लाग ू नहीं होंगे।[भाग II—खण् ड 3(i)] भारत का रािपत्र : असाधारण 3
(4) इस अजधसूचना के बाद कैरी बगै , प् लाजस्ट्टक िीट या समान प्रकार की सामग्री या प् लाजस्ट्टक िीट और बहु-परतीय
पैकेजिग स े बन े कवर और पोजलस्ट् टाइरीन और जवस्ट् ताररत पोजलस्ट् टाइरीन, वस्ट् तुओं सजहत एकल प्रयोग के प् लाजस्ट्टक के
जवजनमााण, आयात, भण् डारण, जवतरण, जवक्रय और उपयोग को जनजषद्ध करने के संबंध म,ें िारी की गई कोई भी
अजधसूचना, इस अजधसूचना के प्रकािन की तारीख स े दस वष ाकी अवजध समाप् त होन े के पश् चात लागू होगी।
5. उक्त जनयमों म,ें जनयम 5 म,ें उप-जनयम (1) म,ें खण् ड (घ) म ें‘‘2000’’ अंकों के स्ट्थ ान पर ‘‘2016’’ रखा िाएगा।
6. उक्त जनयमों, म,ें जनयम 6 म,ें उप-जनयम (2) म,ें खण्ड (क) के पश् चात जनम्न जलजखत खण् ड अंत-स्ट् थाजपत दकया
िाएगा, अथाात:्-
‘‘(क क) सुजनजित करना दक इन यथा संिोजधत जनयमों के उपबंधों का अनुपालन दकया िाए।
7. उक्त जनयमों म ें जनयम 7 म,ें उप-जनयम (1) म,ें खण् ड (क) के पश् चात जनम्न जलजखत खण्ड अंत:स्ट्थ ाजपत दकया
िाएगा, अथाात:्-
‘‘(क क) सुजनजित करना दक इन यथा संिोजधत जनयमों के उपबंधों का अनुपालन दकया िाए।
8. उक्त जनयमों म,ें जनयम 9 म,ें उप-जनयम (1) म,ें ‘‘संबंजधत स्ट्थ ानीय जनकाय’’ िब् दों के पश् चात, ‘‘इन जनयमों के
अंतगता समय-समय पर िारी दकए गए ददिाजनेदेिों के अनुसार’’ िब् द अंत:स्ट्थ ाजपत दकए िाएंगे।
9. जनयम 11 म,ें उप-जनयम (1), -
(i) ‘‘प् लाजस्ट्टक कैरी बगै ’’ िब् दों के पश् चात, ‘‘प् लाजस्ट्टक पैककग’’ िब् द अतं :स्ट्थ ाजपत दकए िाएंग;े
(ii) खंड (क) म ें ‘‘जवजनमााता’’ िब् द के पश् चात, ‘‘उत् पादक’’ या ब्रैंड स्ट् वामी’’ िब् द िोडे िाएगं ,े और ‘‘कैरी बगै ’’
िब् द के बाद, ‘‘और ब्रैंड के स्ट् वामी द्वारा उपयोग प् लाजस्ट्टक पैककग’’ िब् द अंत:स्ट्थ ाजपत दकए िाएंगे;
(iii) खंड (ख), ‘‘बहु-परतीय पैककग’’ िब् दों के पश् चात, ‘‘आयाजतत सामग्री के जलए उपयोग बहु-परतीय पैककग
को िोडकर’’ अंत:स्ट् थाजपत दकया िाएगा।
(iv) खंड (ग) म,ें ‘‘नाम और प्रमाणपत्र स.ं’’ िब् दों के पश् चात, ‘‘उत् पादक का’’ अंत:स्ट् थाजपत दकया िाएगा।
10. जनयम 12 म,ें -
(i) उप-जनयम (2) म,ें ‘‘अपजिष्ट िनक’’ िब् दों के पश् चात, ‘‘पर प्रजतबंध या जनषेध’’ िब् द अंत:स्ट् थाजपत दकए
िाएंगे;
(ii) उप-जनयम (3) म,ें ‘‘अपजिष्ट िनक’’ िब् दों के पश् चात, ‘‘पर प्रजतबंध या जनषेध’’ िब् द अंत:स्ट् थाजपत दकए
िाएंगे।
11. जनयम 13, म ें उप-जनयम (1) म,ें ‘‘संबंजधत संघ राज्य क्षत्रे ’’ िब् दों के पश् चात, ‘‘या केंद्रीय प्रदषू ण जनयंत्रण बोड’ा’
अंत:स्ट् थाजपत दकया िाएगा।
[फा. स.ं 17-2/2001(पाट)ा पाट ाI-एचएसएमडी]
नरेि पाल गगं वार, संयुक् त सजचव
रटप्प ण: मूल जनयम, भारत के रािपत्र, असाधारण, भाग-II, खंड 3, उपखंड (i) म ें सा.का.जन. 320(अ) तारीख 18 माच,ा
2016 द्वारा प्रकाजित दकए गए थ े और तत्प श् चात इनम ें अजधसूचना संख् या सा.का.जन. 285(अ) तारीख 27 माच,ा
2018 के द्वारा संिोधन दकया गया था।4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
MINISTRY OF ENVIRONMENT, FOREST AND CLIMATE CHANGE
NOTIFICATION
New Delhi, the 12th August, 2021
G.S.R. 571(E).—Whereas the draft rules to amend the Plastics Waste Management Rules, 2016,
were published in the Gazette of India, Extraordinary, dated the 11th March, 2021 vide notification number
GSR 169 (E), inviting objections and suggestions from all persons likely to be affected thereby within a
period of sixty days from the date copies of the Gazette containing the said draft rules were made available
to the public;
And whereas, copies of the Gazette containing the said draft rules were made available to the
public on the 11th March, 2021;
And whereas, objections and suggestions received within the aforesaid period have been duly
considered by the Central Government;
Now, therefore, in exercise of the powers conferred by sections 6, 8 and 25 of Environment
(Protection) Act 1986, (29 of 1986), the Central Government hereby makes the following rules to amend
the Plastic Waste Management Rules, 2016, namely :-
1. (1) These rules may be called Plastic Waste Management (Amendment) Rules, 2021.
(2) They shall come into force on the date of their publication in the Official Gazette.
2. In the Plastic Waste Management Rules,2016 (hereinafter referred to as the said rules), in rule 2,
in sub-rule (1), after the word “Importers”, the words, “brand-owner, plastic waste processor (recycler,
co-processor, etc.)” shall be inserted.
3. In the said rules, in rule 3,
(i) after clause (n), the following clause shall be inserted, namely :-
„(na) “Non-woven plastic bag” means Non-woven plastic bag made up of plastic sheet or
web structured fabric of entangled plastic fibers or filaments (and by perforating films)
bonded together by mechanical or thermal or chemical means, and the “non-woven
fabric” means a flat or tufted porous sheet that is made directly from plastic fibres,
molten plastic or plastic films;‟
(ii) after clause (q), the following clause shall be inserted, namely: -
„(qa) “Plastic waste processing” means any process by which plastic waste is handled for
the purpose of reuse, recycling, co-processing or transformation into new products;‟
(iii) after clause (v), the following clauses shall be inserted, namely: -
„(va) “Single-use plastic commodity” mean a plastic item intended to be used once for the
same purpose before being disposed of or recycled;‟
„(vb) “Thermoset plastic” means a plastic which becomes irreversibly rigid when heated
and hence cannot be remoulded into desired shape;‟
„(vc) “Thermoplastic” means a plastic which softens on heating and can be moulded into
desired shape;‟.
4. In the said rules, in rule 4, -
(a) in sub-rule (1),−
(i) for the words “importer stocking”, the words “import, stocking” shall be
substituted;
(ii) in clause (c), for the words “fifty microns in thickness” , the words, figures, letters
and brackets “seventy five microns in thickness with effect from the 30th September,
2021and one hundred and twenty (120) microns in thickness with effect from the
31st December, 2022” shall be substituted;
(iii) in clause (h), after the words, “carry bags”, the words “and commodities” shall be
inserted;[भाग II—खण् ड 3(i)] भारत का रािपत्र : असाधारण 5
(iv) in clause (h), after the words, “compostable plastic carry bags”, the words “or
commodities or both” shall be inserted;
(v) after clause (i), following clause shall be inserted, namely: -
“ ( j) non-woven plastic carry bag shall not be less than 60 Gram Per Square Meter (GSM)
with effect from the 30th September, 2021.”;
(b) after sub-rule (1), the following sub-ules shall be inserted, namely:-
“(2) The manufacture, import, stocking, distribution, sale and use of following single-
use plastic, including polystyrene and expanded polystyrene, commodities shall be
prohibited with effect from the 1st July, 2022:-
(a) ear buds with plastic sticks, plastic sticks for balloons, plastic flags, candy sticks,
ice-cream sticks, polystyrene [Thermocol] for decoration;
(b) plates, cups, glasses, cutlery such as forks, spoons, knives, straw, trays, wrapping or
packing films around sweet boxes, invitation cards, and cigarette packets, plastic or
PVC banners less than 100 micron, stirrers.
(3) The provisions of sub-rule (2) (b) shall not apply to commodities made of
compostable plastic.
(4) Any notification prohibiting the manufacture, import, stocking, distribution, sale and
use of carry bags, plastic sheets or like, or cover made of plastic sheets and multi-
layered packaging and single-use plastic, including polystyrene and expanded
polystyrene, commodities, issued after this notification, shall come into force after the
expiry of ten years, from the date of its publication”.
5. In the said rules, in rule 5, in sub-rule (1), in clause (d), for the figures “2000”, the figures
“2016” shall be substituted.
6. In the said rules, in rule 6, in sub-rule (2), after clause (a), following clause shall be inserted,
namely: -
“(aa) ensuring that the provisions of these rules, as amended, are adhered to;”.
7. In the said rules, in rule 7, in sub-rule (1), after clause (a), following clause shall be inserted,
namely : -
“(aa) ensuring that the provisions of these rules, as amended, are adhered to;”.
8. In the said rules, in rule 9, in sub-rule (1), after the words, “local body concerned”, the words “as
per guidelines issued under these rules from time to time” shall be inserted.
9. In rule 11, sub-rule (1), −
(i) after the words “plastic carry bag”, the words, “plastic packaging” shall be
inserted;
(ii) in clause (a), after the word “manufacturer”, the words “producer or brand-
owner” shall be inserted, and after the words “carry bag”, the words “and plastic
packaging used by the brand owner” shall be inserted;
(iii) in clause (b), after the words “multilayered packaging”, the words “excluding
multi-layered packaging used for imported goods” shall be inserted;
(iv) in clause (c), after the words “name and certificate number”, the words “of
producer” shall be inserted.
10. In rule 12, −
(i) in sub-rule (2), after the words “waste generator,” ,the words “restriction or
prohibition on” shall be inserted;
(ii) in sub-rule (3), after the words “waste generator,” ,the words “
restriction or prohibition on” shall be inserted.6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
11. In rule 13, in sub-rule (1), after the words “Union Territory concerned”, the words “or the Central
Pollution Control Board” shall be inserted.
[F. No. 17-2-2001 (Pt)-Part I -HSMD]
NARESH PAL GANGAWAR, Jt. Secy.
Note : The principal rules were published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-
section (i), vide number GSR 320 (E), dated the 18th March, 2016 and subsequently amended vide
notification number GSR 285 (E), dated the 27th March, 2018.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.