SI 2025/504 - The Russia (Sanctions) (EU Exit) (Amendment) Regulations 2025

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Regulations made by the Secretary of State, laid before Parliament under section 55(3) of the Sanctions and Anti-Money Laundering Act 2018, for approval by resolution of each House of Parliament within twenty-eight days beginning with the day on which the instrument is made, subject to extension for periods of dissolution or prorogation or during which both Houses are adjourned for more than four days.

STATUTORY INSTRUMENTS 2025 No. 504 SANCTIONS The Russia (Sanctions) (EU Exit)

(Amendment) Regulations 2025 Made - - - - 22nd April 2025 Laid before Parliament 23rd April 2025 Coming into force - - 24th April 2025 The Secretary of State(1), considering that the condition in section 45(2) of the Sanctions and Anti- Money Laundering Act 2018(2) is met, makes the following Regulations in exercise of the powers conferred by sections 1, 3(1)(b)(ii) and (d)(ii), 5, 15, 17, 21(1), 45(1)(b) and 54(1) and (2) of, and paragraphs 2(b), 3(a), (b) and (e), 4(b) and (c), 5(a)(ii) and (b), 6(a)(ii) and (b), 7(b), 11(a)(ii), 13(b),

(c), (f), (h), (i), (k), (l), (m), (n), (q) and (w), 14(a), (f) and (k), 17(d) and 20 of Schedule 1 to, that Act.

Citation, commencement and extent

1.—(1) These Regulations may be cited as the Russia (Sanctions) (EU Exit) (Amendment) Regulations 2025.

(2) These Regulations come into force on 24th April 2025.

(3) These Regulations extend to England and Wales, Scotland and Northern Ireland.

(1) The power to make regulations under Part 1 of the Sanctions and Anti-Money Laundering Act 2018 (c. 13) is conferred on an appropriate Minister. Section 1(9)(a) of the Act defines an “appropriate Minister” as including the Secretary of State.

(2) 2018 c. 13. Sections 1(5) and 15 are amended by the Economic Crime and Corporate Transparency Act 2023 (c. 56) (“the 2023 Act”), section 35(2) and (5). Section 17(5)(b)(i) (enforcement) is amended by the Sentencing Act 2020 (c. 17), Schedule 24, paragraph 443(1). Section 17(9)(a) is amended by the 2023 Act, section 214(3). Section 17A is inserted by the 2023 Act,

section 214(4). Sections 1 and 45 are amended by the Economic Crime (Transparency and Enforcement) Act 2022 (c. 10), sections 57 and 62.Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Amendment of the Russia (Sanctions) (EU Exit) Regulations 2019

2. The Russia (Sanctions) (EU Exit) Regulations 2019(3) are amended in accordance with regulations 3 to 16.

Amendment of regulation 21

3.—(1) Regulation 21 (interpretation of Part 5) is amended as follows.

(2) In paragraph (1), insert the following definitions in the appropriate places— ““energy-related technology” means any thing described in Schedule 3 as technology other than any thing for the time being specified in—

(a) Schedule 2 to the Export Control Order 2008;

(b) Annex 1 of the Dual-Use Regulation, (but see paragraph (4CA)); “G7 dependency and further technology” means any thing described in Schedule 3E as technology other than any thing for the time being specified in—

(a) Schedule 2 to the Export Control Order 2008;

(b) Annex 1 of the Dual-Use Regulation, (but see paragraph (4CA)); “Russia’s vulnerable technology” means any thing described in Schedule 3I as technology other than any thing for the time being specified in—

(a) Schedule 2 to the Export Control Order 2008;

(b) Annex 1 of the Dual-Use Regulation, (but see paragraph (4CA)); “sectoral software and technology” means any thing described in Schedule 3IA other than any thing for the time being specified in—

(a) Schedule 2 to the Export Control Order 2008;

(b) Annex 1 of the Dual-Use Regulation, (but see paragraph (4CB));”.

(3) After paragraph (4C) insert— “(4CA) The definitions of “energy-related technology”, “G7 dependency and further technology” and “Russia’s vulnerable technology” do not apply to technology which is—

(a) in the public domain; or

(b) basic scientific research.

(4CB) The definition of “sectoral software and technology” in paragraph (1) does not apply to software or technology which is—

(a) in the public domain; or

(b) used for basic scientific research.”.

Amendment of Chapter 4 of Part 5

4.—(1) Chapter 4 of Part 5 (energy-related goods and related activities) is amended as follows.

(3) S.I. 2019/855 as amended by S.I. 2020/590 and 951, S.I. 2022/123, 194, 195, 203, 205, 241, 395, 452, 477, 500, 792, 801, 814, 818, 850, 1110, 1122 and 1331, S.I. 2023/149, 440, 665, 713, 1364 and 1367 and S.I. 2024/218, 834, 900 and 1157 and by the Sentencing Act 2020 (c. 17).

2Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

(2) In the heading of the Chapter, after “Energy-related goods” insert “, energy-related technology”.

(3) In the headings of regulations 42, 43, 44 and 45, after “energy-related goods” insert “and energy-related technology”.

(4) In regulation 44(3), for “energy related goods” wherever those words occur, substitute “energy-related goods”.

(5) In the provisions specified in paragraph (6), after “energy-related goods” insert “or energy- related technology”.

(6) Those provisions are—

(a) regulation 42(1) and (1A);

(b) regulation 43(1);

(c) regulation 44(1)(c) and (d) and (3)(c) and (d);

(d) regulation 45(1)(b) and (c).

(7) In regulations 42(3) and 43(3)(b), after “goods” insert “or technology”.

(8) After regulation 42 insert— “Transfer of energy-related technology 42A.—(1) A person must not transfer energy-related technology—

(a) to a person connected with Russia;

(b) to a place in Russia.

(2) Paragraph (1) is subject to Part 7 (Exceptions and licences).

(3) A person who contravenes a prohibition in paragraph (1) commits an offence, but—

(a) it is a defence for a person charged with the offence of contravening paragraph (1)

(a) to show that the person did not know and had no reasonable cause to suspect that the person was connected with Russia;

(b) it is a defence for a person charged with the offence of contravening paragraph (1)

(b) (“P”) to show that P did not know and had no reasonable cause to suspect that the transfer was to a place in Russia.”.

(9) In regulation 44—

(a) omit “or” at the end of paragraph (1)(c);

(b) after paragraph (1)(c) insert— “(ca) the transfer of energy-related technology, or”;

(c) after paragraph (3)(c) insert— “(ca) the transfer of energy-related technology—

(i)to a person connected with Russia, or

(ii)to a place in Russia; or”.

(10) In regulation 45, after paragraph (1)(c) insert— “(ca) the transfer of energy-related technology from a place in a third country—

(i)to a person connected with Russia, or

(ii)to a place in Russia;”.

3Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Amendment of Chapter 4H of Part 5

5.—(1) Chapter 4H of Part 5 (G7 dependency and further goods) is amended as follows.

(2) At the end of the heading of the Chapter insert “and G7 dependency and further technology”.

(3) In the headings of regulations 46Y, 46Z, 46Z1 and 46Z2, after “G7 dependency and further goods” insert “and G7 dependency and further technology”.

(4) In the provisions specified in paragraph (5), after “G7 dependency and further goods” insert “or G7 dependency and further technology”.

(5) Those provisions are—

(a) regulation 46Y(2)(b) and (c);

(b) regulation 46Z(1);

(c) regulation 46Z1(1)(c) and (d) and (3)(c) and (d);

(d) regulation 46Z2(1)(c) and (d).

(6) In regulations 46Y(4)(c) and 46Z(3)(b), after “goods” insert “or technology”.

(7) After regulation 46Y insert— “Transfer of G7 dependency and further technology 46YA.—(1) A person must not transfer G7 dependency and further technology—

(a) to a person connected with Russia;

(b) to a place in Russia.

(2) Paragraph (1) is subject to Part 7 (Exceptions and licences).

(3) A person who contravenes a prohibition in paragraph (1) commits an offence, but—

(a) it is a defence for a person charged with the offence of contravening paragraph (1)

(a) to show that the person did not know and had no reasonable cause to suspect that the person was connected with Russia;

(b) it is a defence for a person charged with the offence of contravening paragraph (1)

(b) (“P”) to show that P did not know and had no reasonable cause to suspect that the transfer was to a place in Russia.”.

(8) In regulation 46Z1—

(a) omit “or” at the end of paragraph (1)(c);

(b) after paragraph (1)(c) insert— “(ca) the transfer of G7 dependency and further technology; or”;

(c) omit “or” at the end of paragraph (3)(c);

(d) after paragraph (3)(c) insert— “(ca) the transfer of G7 dependency and further technology—

(i)to a person connected with Russia, or

(ii)to a place in Russia; or”.

(9) In regulation 46Z2, after paragraph (1)(c) insert— “(ca) the transfer of G7 dependency and further technology from a place in a third country—

(i)to a person connected with Russia, or

(ii)to a place in Russia;”.

4Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Amendment of Chapter 4JC of Part 5

6. For the definition of “relevant processed diamonds” in regulation 46Z16Q (Interpretation) substitute— ““relevant processed diamonds” means diamonds which—

(a) were mined in Russia; and

(b) have been processed in a third country;”.

Insertion of Chapter 4JD in Part 5

7. After regulation 46Z16U insert— “Chapter 4JD Certain synthetic diamonds processed in a third country Interpretation 46Z16V.—(1) In this Chapter— “relevant processed synthetic diamonds” means synthetic diamonds which—

(a) are equal to, or larger than, 0.5 carats;

(b) were manufactured in Russia; and

(c) have been processed in a third country; “synthetic diamonds” means any thing falling within the following commodity codes—

(a) 7104 21 (synthetic or reconstructed diamonds, unworked or simply sawn or roughly shaped); or

(b) 7104 91 (synthetic or reconstructed diamonds, other than unworked or simply sawn or roughly shaped); “third country” means a country that is not the United Kingdom, the Isle of Man or Russia.

(2) Paragraph 1 of Schedule 3 applies for the purposes of interpreting the definition of synthetic diamonds in paragraph (1).

(3) For the purposes of this Chapter, synthetic diamonds are processed where they are—

(a) altered;

(b) transformed in any way; or

(c) subjected to any other type of operation or process.

Import of relevant processed synthetic diamonds 46Z16W.—(1) The import of relevant processed synthetic diamonds is prohibited.

(2) Paragraph (1) is subject to Part 7 (Exceptions and licences).

Technical assistance relating to relevant processed synthetic diamonds 46Z16X.—(1) A person must not directly or indirectly provide technical assistance relating to the import of relevant processed synthetic diamonds.

(2) Paragraph (1) is subject to Part 7 (Exceptions and licences).

5Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

(3) A person who contravenes a prohibition in paragraph (1) commits an offence, but it is a defence for a person charged with an offence of contravening paragraph (1) to show that the person did not know and had no reasonable cause to suspect that the technical assistance related to an import described in that paragraph.

Financial services and funds relating to relevant processed synthetic diamonds 46Z16Y.—(1) A person must not directly or indirectly provide financial services or funds in pursuance of or in connection with an arrangement whose object or effect is the import of relevant processed synthetic diamonds.

(2) Paragraph (1) is subject to Part 7 (Exceptions and licences).

(3) A person who contravenes a prohibition in paragraph (1) commits an offence, but it is a defence for a person charged with the offence of contravening paragraph (1) to show that the person did not know and had no reasonable cause to suspect that the financial services or funds (as the case may be) were provided in pursuance of or in connection with an arrangement mentioned in that paragraph.

Brokering services relating to relevant processed synthetic diamonds 46Z16Z.—(1) A person must not directly or indirectly provide brokering services in relation to any arrangement described in regulation 46Z16Y(1).

(2) Paragraph (1) is subject to Part 7 (Exceptions and licences).

(3) A person who contravenes a prohibition in paragraph (1) commits an offence, but it is a defence for a person charged with the offence of contravening paragraph (1) to show that the person did not know and had no reasonable cause to suspect that the brokering services were provided in relation to an arrangement mentioned in that paragraph.”.

Amendment of Chapter 4M of Part 5

8.—(1) Chapter 4M of Part 5 (Russia’s vulnerable goods) is amended as follows.

(2) At the end of the heading of the Chapter insert “and Russia’s vulnerable technology”.

(3) In the headings of regulations 46Z30, 46Z31, 46Z32 and 46Z33, after “Russia’s vulnerable goods” insert “and Russia’s vulnerable technology”.

(4) In regulation 46Z32(3), renumber the first sub-paragraph (c) as sub-paragraph (b).

(5) In the provisions specified in paragraph (6), after “Russia’s vulnerable goods” insert “or Russia’s vulnerable technology”.

(6) Those provisions are—

(a) regulation 46Z30(2)(b) and (c);

(b) regulation 46Z31(1);

(c) regulation 46Z32(1)(c) and (d) and (3)(c) and (d);

(d) regulation 46Z33(1)(c) and (d).

(7) In regulations 46Z30(4)(c) and 46Z31(3)(b), after “goods” insert “or technology”.

(8) After regulation 46Z30 insert— “Transfer of Russia’s vulnerable technology 46Z30A.—(1) A person must not transfer Russia’s vulnerable technology—

(a) to a person connected with Russia;

6Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

(b) to a place in Russia.

(2) Paragraph (1) is subject to Part 7 (Exceptions and licences).

(3) A person who contravenes a prohibition in paragraph (1) commits an offence, but—

(a) it is a defence for a person charged with the offence of contravening paragraph (1)

(a) to show that the person did not know and had no reasonable cause to suspect that the transfer was to a person connected with Russia;

(b) it is a defence for a person charged with the offence of contravening paragraph (1)

(b) (“P”) to show that P did not know and had no reasonable cause to suspect that the transfer was to a place in Russia.”.

(9) In regulation 46Z32—

(a) omit “or” at the end of paragraph (1)(c);

(b) after paragraph (1)(c) insert— “(ca) the transfer of Russia’s vulnerable technology; or”;

(c) omit “or” at the end of paragraph (3)(c);

(d) after paragraph (3)(c) insert— “(ca) the transfer of Russia’s vulnerable technology—

(i)to a person connected with Russia, or

(ii)to a place in Russia; or”.

(10) In regulation 46Z33, after paragraph (1)(c) insert— “(ca) the transfer of Russia’s vulnerable technology from a place in a third country—

(i)to a person connected with Russia, or

(ii)to a place in Russia.”.

Insertion of Chapter 4N of Part 5

9. After regulation 46Z33 insert— “Chapter 4N Sectoral software and technology Making sectoral software and technology available 46Z34.—(1) A person must not directly or indirectly make sectoral software and technology available—

(a) to a person connected with Russia;

(b) for use in Russia.

(2) Paragraph (1) is subject to Part 7 (Exceptions and licences).

(3) A person who contravenes a prohibition in paragraph (1) commits an offence, but—

(a) it is a defence for a person charged with an offence of contravening paragraph (1)

(a) (“P”) to show that P did not know and had no reasonable cause to suspect that the person was connected with Russia;

(b) it is a defence for a person charged with the offence of contravening paragraph (1)

(b) to show that the person did not know and had no reasonable cause to suspect that the software or technology were for use in Russia.

7Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Transfer of sectoral software and technology 46Z35.—(1) A person must not transfer sectoral software and technology—

(a) to a person connected with Russia;

(b) to a place in Russia.

(2) Paragraph (1) is subject to Part 7 (Exceptions and licences).

(3) A person who contravenes a prohibition in paragraph (1) commits an offence, but—

(a) it is a defence for a person charged with the offence of contravening paragraph (1)

(a) (“P”) to show that P did not know and had no reasonable cause to suspect that the person was connected with Russia;

(b) it is a defence for a person charged with the offence of contravening paragraph (1)

(b) to show that the person did not know and had no reasonable cause to suspect that the transfer was to a place in Russia.

Technical assistance relating to sectoral software and technology 46Z36.—(1) A person must not directly or indirectly provide technical assistance relating to sectoral software and technology—

(a) to a person connected with Russia; or

(b) for use in Russia.

(2) Paragraph (1) is subject to Part 7 (Exceptions and licences).

(3) A person who contravenes a prohibition in paragraph (1) commits an offence, but—

(a) it is a defence for a person charged with an offence of contravening paragraph (1)

(a) (“P”) to show that P did not know and had no reasonable cause to suspect that the person was connected with Russia;

(b) it is a defence for a person charged with an offence of contravening paragraph (1)

(b) to show that the person did not know and had no reasonable cause to suspect that the software or technology were for use in Russia.

Financial services and funds relating to sectoral software and technology 46Z37.—(1) A person must not directly or indirectly provide, to a person connected with Russia, financial services in pursuance of or in connection with an arrangement whose object or effect is—

(a) directly or indirectly making sectoral software and technology available to a person;

(b) the transfer of sectoral software and technology; or

(c) the direct or indirect provision of technical assistance relating to sectoral software and technology.

(2) A person must not directly or indirectly make funds available to a person connected with Russia in pursuance of or in connection with an arrangement mentioned in paragraph (1).

(3) A person must not directly or indirectly provide financial services or funds in pursuance of or in connection with an arrangement whose object or effect is—

(a) directly or indirectly making sectoral software and technology available—

(i)to a person connected with Russia, or

(ii)for use in Russia;

8Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

(b) the transfer of sectoral software and technology—

(i)to a person connected with Russia, or

(ii)to a place in Russia; or

(c) the direct or indirect provision of technical assistance relating to sectoral software and technology—

(i)to a person connected with Russia, or

(ii)for use in Russia.

(4) Paragraphs (1) to (3) are subject to Part 7 (Exceptions and licences).

(5) A person who contravenes a prohibition in any of paragraphs (1) to (3) commits an offence, but—

(a) it is a defence for a person charged with an offence of contravening paragraph (1) or (2) (“P”) to show that P did not know and had no reasonable cause to suspect that the person was connected with Russia;

(b) it is a defence for a person charged with the offence of contravening paragraph (3) to show that the person did not know and had no reasonable cause to suspect that the financial services or funds (as the case may be) were provided in pursuance of or in connection with an arrangement mentioned in that paragraph.

Brokering services: non-UK activity relating to sectoral software and technology 46Z38.—(1) A person must not directly or indirectly provide brokering services in relation to an arrangement (“arrangement A”) whose object or effect is—

(a) directly or indirectly making sectoral software and technology available in a third country for transfer—

(i)to a person connected with Russia, or

(ii)to a place in Russia;

(b) the transfer of sectoral software and technology from a place in a third country—

(i)to a person connected with Russia, or

(ii)to a place in Russia;

(c) the direct or indirect provision, in a non-UK country, of technical assistance relating to sectoral software and technology—

(i)to a person connected with Russia, or

(ii)for use in Russia;

(d) the direct or indirect provision, in a non-UK country, of financial services—

(i)to a person connected with Russia, where arrangement A, or any other arrangement in connection with which arrangement A is entered into, is an arrangement mentioned in regulation 46Z37(1), or

(ii)where arrangement A, or any other arrangement in connection with which arrangement A is entered into, is an arrangement mentioned in regulation 46Z37(3);

(e) directly or indirectly making funds available, in a non-UK country, to a person connected with Russia, where arrangement A, or any other arrangement in connection with which arrangement A is entered into, is an arrangement mentioned in regulation 46Z37(1); or 9Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

(f) the direct or indirect provision of funds from a non-UK country, where arrangement A, or any other arrangement in connection with which arrangement A is entered into, is an arrangement mentioned in regulation 46Z37(3).

(2) Paragraph (1) is subject to Part 7 (Exceptions and licences).

(3) A person who contravenes a prohibition in paragraph (1) commits an offence, but it is a defence for a person charged with that offence to show that the person did not know and had no reasonable cause to suspect that the brokering services were provided in relation to an arrangement mentioned in that paragraph.

(4) In this regulation— “non-UK country” means a country that is not the United Kingdom; “third country” means a country that is not the United Kingdom, the Isle of Man or Russia.”.

Amendment of regulation 60A

10.—(1) Regulation 60A (trade: exceptions in respect of personal effects etc.) is amended as follows.

(2) In paragraph (1B) after “G7 dependency and further goods”—

(a) in the first place where it occurs insert “and G7 dependency and further technology”;

(b) in the second place where it occurs insert “or G7 dependency and further technology”.

(3) In paragraph (1E)—

(a) after “Russia’s vulnerable goods” in the first place where it occurs insert “and Russia’s vulnerable technology”;

(b) in sub-paragraph (a), for “any Russia’s vulnerable goods which are necessary” substitute “any Russia’s vulnerable goods or Russia’s vulnerable technology which is necessary”.

(4) After paragraph (1E) insert— “(1F) The prohibitions in Chapter 4N (sectoral software and technology) are not contravened by a relevant activity in relation to any sectoral software and technology which is necessary for the official purposes of a diplomatic mission or consular post in Russia or an international organisation enjoying immunities in accordance with international law.”.

(5) In paragraph (2) insert the following definitions in the appropriate places— ““G7 dependency and further technology” has the meaning given in regulation 21 (interpretation of Part 5); “Russia’s vulnerable goods” has the meaning given in regulation 21 (interpretation of Part 5);

“Russia’s vulnerable technology” has the meaning given in regulation 21 (interpretation of Part 5); “sectoral software and technology” has the meaning given in regulation 21 (interpretation of Part 5);”.

Amendment of regulation 60B

11.—(1) Regulation 60B (trade: exceptions in relation to consumer communication devices and software updates) is amended as follows.

(2) In paragraph (1), for “or G7 dependency and further goods” substitute “, G7 dependency and further goods or G7 dependency and further technology”.

(3) In paragraph (2), after the definition of “G7 dependency and further goods” insert— 10Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. ““G7 dependency and further technology” has the meaning given in regulation 21 (interpretation of Part 5);”.

Insertion of regulation 60DZA

12. After regulation 60D insert— “Trade: exceptions relating to sectoral software and technology 60DZA.—(1) The prohibitions in Chapter 4N (sectoral software and technology) are not contravened by any act done by a person (“P”) in satisfaction of an obligation to a person connected with Russia where that act is to discharge, or comply with, UK statutory or regulatory obligations, such obligations not arising under contract, provided that P notifies the Secretary of State of that act before the end of the period of 12 months beginning with the first day on which the act is done.

(2) The prohibitions in Chapter 4N are not contravened by any act done by a person (“P”) in satisfaction of an obligation arising under a contract concluded before 23rd April 2025, or an ancillary contract necessary for the satisfaction of such a contract, provided that—

(a) the act is carried out before the end of 22nd July 2025, and

(b) P notifies the Secretary of State of that act, before or after the act is carried out, by the end of 22nd July 2025.

(3) The prohibitions in Chapter 4N are not contravened by activities relating to sectoral software and technology where that software or technology is of a non-commercial nature or for personal use.”.

Amendment of regulation 60I

13.—(1) Regulation 60I (Trade: exceptions in relation to Energy-related Goods) is amended as follows.

(2) At the end of the heading insert “and energy-related technology”.

(3) In paragraph (1), after “energy-related goods”, in both places, insert “and energy-related technology”.

(4) In paragraph (2), after “energy-related goods” insert “, energy-related technology”.

(5) In paragraph (3), insert in the appropriate place— ““energy-related technology” has the meaning given in regulation 21(1) (interpretation of Part

5);”.

Amendment of regulation 61

14.—(1) Regulation 61 (trade: exception for emergencies in certain cases) is amended as follows.

(2) In paragraph (1A)(d), after “G7 dependency and further goods” insert “etc.”.

(3) After paragraph (1A)(d) insert— “(da) in Chapter 4M (Russia’s vulnerable goods etc.);

(db) in Chapter 4N (sectoral software and technology);”.

Amendment of regulation 85

15.—(1) Regulation 85(3B) (trade enforcement: application of CEMA) is amended as follows.

11Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

(2) At the end of each of the provisions specified in paragraph (3) insert “or to the transfer of technology to or from the United Kingdom”.

(3) Those provisions are—

(a) sub-paragraph (ca);

(b) sub-paragraph (cb);

(c) sub-paragraph (cc);

(d) sub-paragraph (d);

(e) sub-paragraph (k);

(f) sub-paragraph (ka);

(g) sub-paragraph (kb);

(h) sub-paragraph (l);

(i) sub-paragraph (s);

(j) sub-paragraph (sa);

(k) sub-paragraph (sb);

(l) sub-paragraph (t).

(4) After sub-paragraph (ca) insert— “(caa) regulation 42A(3) insofar as it does not relate to the transfer of technology to or from the UK;”.

(5) After sub-paragraph (jzc) insert— “(jzca) regulation 46T(3) insofar as it does not relate to the import or export of goods;

(jzcb) regulation 46V(3) insofar as it does not relate to the import or export of goods;

(jzcc) regulation 46W(3) insofar as it does not relate to the import or export of goods;

(jzcd) regulation 46X(3) insofar as it does not relate to the import or export of goods;”.

(6) After sub-paragraph (k) insert— “(kza) regulation 46YA(3) insofar as it does not relate to the transfer of technology to or from the United Kingdom;”.

(7) After sub-paragraph (rzd) insert— “(rze) regulation 46Z16D(4) insofar as it does not relate to the import or export of goods;

(rzf) regulation 46Z16E(3) insofar as it does not relate to the import or export of goods;

(rzg) regulation 46Z16G(3) insofar as it does not relate to the import or export of goods;

(rzh) regulation 46Z16H(3) insofar as it does not relate to the import of goods;

(rzi) regulation 46Z16I(3) insofar as it does not relate to the import or export of goods;”.

(8) After sub-paragraph (re) insert— “(rf) regulation 46Z19(3) insofar as it does not relate to the import or export of goods;

(rg) regulation 46Z21(3) insofar as it does not relate to the import or export of goods;

(rh) regulation 46Z22(3) insofar as it does not relate to the import or export of goods;

(ri) regulation 46Z23(3) insofar as it does not relate to the import or export of goods;

(rj) regulation 46Z26(3) insofar as it does not relate to the import or export of goods;

(rk) regulation 46Z27(3) insofar as it does not relate to the import or export of goods;

(rl) regulation 46Z28(3) insofar as it does not relate to the import or export of goods;

12Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

(rm) regulation 46Z29(3) insofar as it does not relate to the import or export of goods;”.

(9) After sub-paragraph (s) insert— “(saa) regulation 46Z30A(3) insofar as it does not relate to the transfer of technology to or from the United Kingdom;”.

(10) After sub-paragraph (t) insert— “(ta) regulation 46Z34(3) insofar as it does not relate to the transfer of technology to or from the United Kingdom;

(tb) regulation 46Z35(3) insofar as it does not relate to the transfer of technology to or from the United Kingdom;

(tc) regulation 46Z36(3) insofar as it does not relate to the transfer of technology to or from the United Kingdom;

(td) regulation 46Z37(5) insofar as it does not relate to the transfer of technology to or from the United Kingdom;

(te) regulation 46Z38(3) insofar as it does not relate to the transfer of technology to or from the United Kingdom;”.

Amendment and insertion of Schedules

16.—(1) Schedule 2A (Critical-industry goods and critical-industry technology) is amended in accordance with paragraphs (2) to (4).

(2) In Part 1, in paragraph 1—

(a) in sub-paragraph (1), for “8” substitute “9”;

(b) in sub-paragraph (3)(a), for Schedules 2 and 3 of” substitute “Schedule 2 to”.

(3) In Part 2, in entries 3D991 and 3E991, omit, in each place it occurs, “of Annex 1 of the Dual- Use Regulation”.

(4) In Part 9, after paragraph 12, insert— “13. All-terrain vehicles. [Note: For the purpose of this entry, an “all-terrain vehicle” means a motorised vehicle designed to travel on three or four low pressure (less than 0.9 bar gauge pressure) tyres on unpaved surfaces, typically having a seat designed to be straddled by the operator and handlebars for steering control and includes quad bikes, off-road vehicles and utility terrain vehicles.

14. Lithium and lithium compounds as follows—

(a) Lithium (CAS 7439-93-2);

(b) Lithium carbonate (CAS 554-13-2);

(c) Lithium hydroxide (CAS 1310-65-2 and CAS 1310-66-3);

(d) Lithium oxide (CAS 12057-24-8);

(e) Lithium cobalt oxide (CAS 12190-79-3);

(f) Lithium iron phosphate (CAS 15365-14-7);

(g) Lithium manganese oxide (CAS 12057-17-9);

(h) Lithium nickel manganese cobalt oxide (CAS 346417-97-8); or

(i) Lithium titanate (CAS 12031-82-2).

15. Ultra-High-Molecular-Weight Polyethylene (UHMWPE) not controlled by 1C010 or 1C210, presented in any of the following forms— 13Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

(a) Primary forms (9002-88-4);

(b) Filament yarns or monofilaments;

(c) Filament tows;

(d) Rovings;

(e) Staples or chopped fibres;

(f) Fabrics;

(g) Pulps or flocks.”.

(5) Schedule 3 (Energy-related goods and infrastructure-related goods) is amended in accordance with paragraphs (6) to (9).

(6) In the heading, after “Energy-related goods” insert “, energy-related technology”.

(7) In Part 1—

(a) at the end of paragraph 1 insert— “(4) For the purposes of this Schedule, “technology” has the meaning given in paragraph 37 of Schedule 1 to the Act.”;

(b) after paragraph 1 insert— “1A. Terms printed in quotation marks and not defined in this Schedule have the meaning given to them in Annex I of the Dual-Use Regulation.”.

(8) In the first column of the table in paragraph 3A in Part 2—

(a) in item a, omit “, software and data, e.g. seismic analysis data”;

(b) in item b, omit row b.1.

(9) At the end of Part 3 insert— “Part 4 Energy-related technology

6. Technology “required” for the “development”, “production” or “use” of any thing falling within paragraphs 2 to 3A.”.

(10) In Schedule 3C (Defence and security goods and defence and security technology), in Part 3, at the end of the table in paragraph 15(2), insert— “2926 9070 Malononitrile (CAS 109-77-3) 2922 29 o-Aminophenol (CAS 95-55-6) 2921 49 2-Chlorobenzylamine (CAS 89-97-4) 2915 9070 Chloroacetyl Chloride (CAS 79-04-9) 2914 39 Acetophenone (CAS 98-86-2) 2913 2-Chlorobenzaldehyde (CAS 89-98-5) 2906 29 2-Chlorobenzyl Alcohol (CAS 17849-38-6) 2903 9980 Benzene, 1-chloro-2-(dimethoxymethyl) (CAS 70380-66-4) 2903 13 Chloroform (CAS 67-66-3)”.

14Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

(11) In Schedule 3DA (Schedule 3DA Revenue Generating Goods)—

(a) in Part 1, in paragraph 3, for “or column 1 of the table in Part 3” substitute “, column 1 of the table in Part 3 or column 1 of the table in Part 4”;

(b) after Part 3 insert— “PART 4 Commodity code (1) Item (2) 2804 29 10 Helium 2845 40 Helium-3”

(12) Schedule 3E (G7 dependency and further goods) is amended in accordance with paragraphs

(13) to (17).

(13) At the end of the heading, after “goods” insert “and G7 dependency and further technology”.

(14) In Part 1—

(a) in paragraph 1, for “and 3” substitute “to 5”;

(b) after paragraph 1A insert— “1B. For the purposes of this Schedule, “technology” has the meaning given in paragraph 37 of Schedule 1 to the Act.

1C. Terms printed in quotation marks and not defined in this Schedule have the meaning given to them in Annex I of the Dual-Use Regulation.”.

(15) For the table in Part 2, substitute the table in Schedule 1 to these Regulations.

(16) At the end, insert the Part 5 in Schedule 2 to these Regulations.

(17) After Part 5 insert— “Part 6 G7 dependency and further technology

6. Technology “required” for the “development”, “production” or “use” of any thing falling within Parts 2 to 5, other than any thing falling within Chapter 6, 44, 45, 47, 48, 51, 52, 53, 54, 55, 56, 58, 59, 60, 63 or 68 of the Goods Classification Table.”.

(18) Schedule 3I (Russia’s vulnerable goods) is amended in accordance with paragraphs (19) to (25).

(19) At the end of the heading insert “and Russia’s vulnerable technology”.

(20) Immediately before paragraph 1 insert— “Part 1 General”.

(21) After paragraph 1 insert— “1A. For the purposes of this Schedule, “technology” has the meaning given in paragraph 37 of Schedule 1 to the Act.

1B. Terms printed in quotation marks and not defined in this Schedule have the meaning given to them in Annex I of the Dual-Use Regulation.

15Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

1C. Russia’s vulnerable goods means any thing falling within a commodity code mentioned in column 1 of the table in Part 2 or column 1 of the table in Part 3.”.

(22) Immediately after paragraph 2 but before the table insert— “Part 2 Russia’s vulnerable goods”.

(23) For the table in paragraph 2 substitute the table in Schedule 3 to these Regulations.

(24) After Part 2 insert the Part 3 in Schedule 4 to these Regulations.

(25) After Part 3 insert— “Part 4 Russia’s vulnerable technology

4. Technology “required” for the “development”, “production” or “use” of any thing falling within Parts 2 and 3, other than any thing falling within Chapter 44 or 68 of the Goods Classification Table.”.

(26) After Schedule 3I insert the Schedule 3IA (sectoral software and technology) set out in Schedule 5 to these Regulations.

(27) Omit the commodity codes and associated descriptions in respect of which the relevant codes are specified in Schedule 6 to these Regulations.

Transitional provision

17.—(1) Paragraph (2) applies in relation to each licence issued by the Secretary of State which—

(a) was in effect immediately before the operative day; and

(b) authorises an act which would otherwise be prohibited, on and after the operative day, by

Chapter 4, 4H, 4M, 6 or 6B of Part 5 (Trade) of the 2019 Regulations, and such a licence is referred to in this regulation as an “existing licence”.

(2) A licence is deemed to have been issued by the Secretary of State at the beginning of the operative day under regulation 65 (Trade licences) of the 2019 Regulations, disapplying every provision of Part 5 of the 2019 Regulations which would, in the absence of this paragraph, prohibit a relevant act.

(3) In this regulation— “the 2019 Regulations” means the Russia (Sanctions) (EU Exit) Regulations 2019; “the operative day” means the day on which these Regulations come into force; “relevant act” means an act specified in paragraph (4).

(4) The relevant acts for the purposes of this regulation are the transfer or making available of the minimum software and technology, or the direct or indirect provision of services required, for—

(a) the installation, maintenance, operation and repair of the goods specified in the existing licence; or

(b) the direct or indirect provision of the services specified in the existing licence.

16Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Stephen Doughty Minister of State Foreign, Commonwealth and Development 22nd April 2025 Office 17Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Schedules Schedule 1 Regulation 16(15) New table in Part 2 of Schedule 3E “Commodity code (1) Name of the good (2) 0601 10 Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, dormant 0601 20 Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, in growth or in flower; chicory plants and roots 0602 30 Rhododendrons and azaleas, grafted or not 0602 40 Roses, grafted or not 0602 90 Other live plants (including their roots), cuttings and slips; mushroom spawn - Other 0604 20 Foliage, branches and other parts of plants, without flowers or flower buds, and grasses, mosses and lichens, being goods of a kind suitable for bouquets or for ornamental purposes, fresh, dried, dyed, bleached, impregnated or otherwise prepared - Fresh 2508 10 Bentonite 2508 30 Fireclay (excluding kaolin and other kaolinic clays and expanded clay) 2508 40 Other clays 2508 50 Andalusite, kyanite and sillimanite 2508 60 Mullite 2508 70 Chamotte or dinas earths 2509 Chalk 2512 Siliceous fossil meals (for example, kieselguhr, tripolite and diatomite) and similar siliceous earths, whether or not calcined, of an apparent specific gravity of 1 or less 2515 11 Marble and travertine, crude or roughly trimmed 2515 12 Merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape 18Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 2515 20 Ecaussine and other calcareous monumental or building stone; alabaster 2518 20 Calcined or sintered dolomite 2519 10 Natural magnesium carbonate (magnesite) 2520 10 Gypsum; anhydrite 2521 Limestone flux; limestone and other calcareous stone, of a kind used for the manufacture of lime or cement 2522 10 Quicklime 2522 20 Slaked lime 2522 30 Hydraulic lime 2525 10 Crude mica and mica rifted into sheets or splittings 2525 20 Mica powder 2525 30 Mica waste 2526 10 Natural steatite, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a square or rectangular shape, and talc, uncrushed or unpowdered 2526 20 Natural steatite, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape; talc - Crushed or powdered 2530 20 Kieserite, epsomite (natural magnesium sulphates) 2610 Chromium ores and concentrates 2701 Coal; briquettes, ovoids and similar solid fuels manufactured from coal 2702 Lignite, whether or not agglomerated, excluding jet 2703 Peat (including peat litter), whether or not agglomerated 2704 Coke and semi-coke of coal, of lignite or of peat, whether or not agglomerated; retort carbon 2707 30 Xylol (xylenes) 2708 10 Pitch obtained from coal tar or from other mineral tars 2708 20 Pitch coke 2712 10 Petroleum jelly 19Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 2712 20 Paraffin wax containing < 0.75% by weight of oil 2712 90 Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured 2715 Bituminous mastics, cut-backs and other bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch - Other 2804 10 Hydrogen 2804 30 Nitrogen 2804 40 Oxygen 2804 50 Boron; tellurium 2804 61 Silicon - Containing by weight not less than

99.99 % of silicon 2804 69 Silicon containing < 99.99% by weight of silicon 2804 70 Phosphorus 2804 90 Selenium 2806 10 Hydrogen chloride (hydrochloric acid) 2806 20 Chlorosulphuric acid 2818 30 Aluminium hydroxide 2819 10 Chromium trioxide 2819 90 Chromium oxides and hydroxides - Other 2820 10 Manganese dioxide 2820 90 Manganese oxides (excluding manganese dioxide) 2832 20 Sulphites (excluding sodium sulphites) 2839 11 Metasilicates of sodium, including commercial metasilicates 2839 19 Silicates of sodium, including commercial silicates (excluding sodium metasilicates) 2839 90 Silicates; commercial alkali metal silicates - Other 2840 30 Peroxoborates (perborates) 2843 10 Colloidal precious metals 2843 21 Silver nitrate 20Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 2843 29 Silver compounds - Other 2843 30 Gold compounds 2843 90 Inorganic or organic compounds of precious metals, whether or not chemically defined (excluding silver and gold); amalgams of precious metals 2847 Hydrogen peroxide, whether or not solidified with urea 2901 10 Saturated acyclic hydrocarbons 2901 21 Ethylene 2901 22 Propene “propylene” 2901 23 Butene (butylene) and isomers thereof 2901 24 Buta-1,3-diene and isoprene 2902 11 Cyclohexane 2902 19 Cyclanes, cyclenes and cycloterpenes (excluding cyclohexane) 2902 20 Benzene 2902 30 Toluene 2902 41 O-xylene 2902 42 M-xylene 2902 43 P-xylene 2902 44 Mixed xylene isomers 2902 50 Styrene 2902 60 Ethylbenzene 2902 70 Cumene 2902 90 Cyclic hydrocarbons (excluding cyclanes, cyclenes, benzene, toluene, xylenes, styrene, ethylbenzene and cumene) ex 2903 Halogenated derivatives of hydrocarbons (excluding 2903 13 Chloroform (CAS 67-66-3) and 2903 9980 Benzene, 1-chloro-2-

(dimethoxymethyl) (CAS 70380-66-4)) 2904 Sulphonated, nitrated or nitrosated derivatives of hydrocarbons, whether or not halogenated 2906 11 Menthol 2906 12 Cyclohexanol, methylcyclohexanols and dimethylcyclohexanols 2906 13 Sterols and inositols 21Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 2906 19 Cyclanic, cyclenic or cycloterpenic - Other 2906 21 Benzyl alcohol 2907 11 Phenol (hydroxybenzene) and its salts 2907 12 Cresols and their salts 2907 13 Octylphenol, nonylphenol and their isomers;

salts thereof 2907 15 Naphthols and their salts 2907 19 Monophenols - Other 2907 21 Resorcinol and its salts 2907 22 Hydroquinone (quinol) and its salts 2907 23 4,4’-isopropylidenediphenol “bisphenol a, diphenylolpropane” and its salts 2907 29 Polyphenols and phenol-alcohols (excluding resorcinol and hydroquinone “quinol” and their salts, and 4,4’-isopropylidenediphenol “bisphenol a, diphenylolpropane” and its salts) 2909 11 Diethyl ether 2909 19 Acyclic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives (excluding diethyl ether) 2909 20 Cyclanic, cyclenic or cycloterpenic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives 2909 30 Aromatic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives 2909 41 2.2′-Oxydiethanol (diethylene glycol, digol) 2909 43 Monobutyl ethers of ethylene glycol or of diethylene glycol 2909 44 Monoalkylethers of ethylene glycol or of diethylene glycol (excluding monobutyl ethers) 2909 49 Ether-alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives - Other 2909 50 Ether-phenols, ether-alcohol-phenols and their halogenated, sulphonated, nitrated or nitrosated derivatives 2909 60 Alcohol peroxides, ether peroxides, ketone peroxides and their halogenated, sulphonated, nitrated or nitrosated derivatives 2910 20 Methyloxirane (propylene oxide) 22Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 2910 30 1-chloro-2,3-epoxypropane “epichlorohydrin” 2910 40 Dieldrin (iso, inn) 2910 50 Endrin (iso) 2910 90 Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a three-membered ring, and their halogenated, sulphonated, nitrated or nitrosated derivatives (excluding oxirane “ethylene oxide”, methyloxirane “propylene oxide”, 1-chloro-2,3-epoxypropane “epichlorohydrin”, dieldrin (iso, inn) and endrin (iso)) 2911 Acetals and hemiacetals, whether or not with other oxygen function, and their halogenated, sulphonated, nitrated or nitrosated derivat 2912 11 Methanal “formaldehyde” 2912 12 Ethanal (acetaldehyde) 2912 19 Acyclic aldehydes, without other oxygen function (excluding methanal (formaldehyde) and ethanal (acetaldehyde)) 2912 21 Benzaldehyde 2912 29 Cyclic aldehydes, without other oxygen function (excluding benzaldehyde) 2912 41 Vanillin “4-hydroxy-3-methoxybenzaldehyde” 2912 42 Ethylvanillin “3-ethoxy-4- hydroxybenzaldehyde” 2912 49 Aldehyde-alcohols, aldehyde-ethers, aldehyde- phenols and aldehydes with other oxygen function - Other 2912 50 Cyclic polymers of aldehydes 2912 60 Paraformaldehyde ex 2915 90 Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives - Other (excluding 2915 9070 Chloroacetyl Chloride (CAS 79-04-9 2916 11 Acrylic acid and its salts 2916 12 Esters of acrylic acid 2916 13 Methacrylic acid and its salts 2916 14 Esters of methacrylic acid 23Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 2916 15 Oleic, linoleic or linolenic acids, their salts and esters 2916 16 Binapacryl (iso) 2916 19 Unsaturated acyclic monocarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and halogenated, sulphonated, nitrated or nitrosated derivatives (excluding acrylic acid and its salts and esters, methacrylic acid and its salts and esters, and oleic, linoleic or linolenic acids, their salts and esters, and binapacryl (iso)) 2916 20 Cyclanic, cyclenic or cycloterpenic monocarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and their halogenated, sulphonated, nitrated or nitrosated derivatives (excluding inorganic or organic compounds of mercury) 2916 31 Benzoic acid, its salts and esters (excluding inorganic or organic compounds of mercury) 2916 32 Benzoyl peroxide and benzoyl chloride 2916 34 Phenylacetic acid and its salts 2916 39 Aromatic monocarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and their halogenated, sulphonated, nitrated or nitrosated derivatives (excluding benzoic acid, its salts and esters, benzoyl peroxide, benzoyl chloride, phenylacetic acid and its salts, and inorganic or organic compounds of mercury whether or not chemically defined) 2921 22 Hexamethylenediamine and its salts 2921 41 Aniline and its salts 2922 11 Monoethanolamine and its salts 2922 43 Anthranilic acid and its salts 2923 20 Lecithins and other phosphoaminolipids 2933 54 Other derivatives of malonylurea (barbituric acid); salts thereof 2933 71 6-Hexanelactam (epsilon caprolactam) 3201 10 Quebracho extract 3201 20 Wattle extract 3201 90 Tanning extracts of vegetable origin; tannins and their salts, ethers, esters and other derivatives 24Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 3202 10 Synthetic organic tanning substances 3202 90 Synthetic organic tanning substances; inorganic tanning substances; tanning preparations, whether or not containing natural tanning substances; enzymatic preparations for pre- tanning 3203 Colouring matter of vegetable or animal origin, including dye extracts (excluding animal black), whether or not chemically defined;

preparations based on colouring matter of vegetable or animal origin of a kind used to dye fabrics or produce colorant preparations (excluding preparations of headings 3207, 3208, 3209, 3210, 3213 and 3215) - Other 3206 49 inorganic or mineral colouring matter, n.e.s.;

preparations based on inorganic or mineral colouring matter of a kind used for colouring any material or produce colorant preparations, n.e.s. (excluding preparations of heading 3207, 3208, 3209, 3210, 3213 and 3215 and inorganic products of a kind used as liminophores) – Other 3207 20 Vitrifiable enamels and glazes, engobes (slips) and similar preparations 3207 40 Glass frit and other glass, in the form of powder, granules or flakes 3208 10 Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to

Chapter 32 - Based on polyesters 3208 20 Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to Chapter 32 - Based on acrylic or vinyl polymers 3208 90 Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to

Chapter 32 - Other 25Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 3209 10 Paints and varnishes, including enamels and lacquers, based on acrylic or vinyl polymers, dispersed or dissolved in an aqueous medium 3209 90 Paints and varnishes, including enamels and lacquers, based on synthetic or chemically modified natural polymers, dispersed or dissolved in an aqueous medium (excluding those based on acrylic or vinyl polymers) - Other 3210 Other paints and varnishes (including enamels, lacquers and distempers); prepared water pigments of a kind used for finishing leather 3212 90 Pigments (including metallic powders and flakes) dispersed in non- aqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels);

stamping foils; dyes and other colouring matter put up in forms or packings for retail sale - Other 3214 10 Glaziers’ putty, grafting putty, resin cements, caulking compounds and other mastics; painters’ fillings 3214 90 Glaziers’ putty, grafting putty, resin cements, caulking compounds and other mastics;

painters’ fillings; non-refractory surfacing preparations for façades, indoor walls, floors, ceilings or the like - Other 3403 11 Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals – Containing petroleum oils or oils obtained from bituminous minerals - Preparations for the treatment of textile materials, leather, furskins or other materials 3403 19 Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, 26Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals – Containing petroleum oils or oils obtained from bituminous minerals - Other 3403 91 Preparations for the treatment of textile materials, leather, furskins or other materials 3403 99 Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals - Other 3505 10 Dextrins and other modified starches 3506 99 Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg - Other 3701 20 Instant print film 3701 91 For colour photography (polychrome) 3702 10 Photographic film in rolls, unexposed, for x-ray (excluding that of paper, paperboard or textiles) 3702 31 Photographic film including instant print film, in rolls, sensitised, unexposed, without perforations, width <= 105 mm, for colour photography “polychrome” (excluding that of paper, paperboard or textiles) 3702 32 Other film, with silver halide emulsion 3702 39 Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposed - Other 3702 41 Photographic film including instant print film, sensitised, in rolls, unexposed, without perforations, width > 610 mm, length > 200 m, for colour photography “polychrome” (excluding that of paper, paperboard or textiles) 27Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 3702 42 Photographic film “including instant print film”, sensitised, in rolls, unexposed, without perforations, width > 610 mm, length > 200 m, for monochrome photography (excluding that of paper, paperboard or textiles) 3702 43 Other film, without perforations, of a width exceeding 105 mm - Of a width exceeding 610 mm and of a length not exceeding 200 m 3702 44 Other film, without perforations, of a width exceeding 105 mm - Of a width exceeding 105 mm but not exceeding 610 mm 3702 52 Photographic film, sensitised, in rolls, unexposed, with perforations, for colour photography “polychrome”, width <= 16 mm (excluding of paper, paperboard or textiles) 3702 53 Photographic film, sensitised, in rolls, unexposed, with perforations, for colour photography “polychrome”, width > 16 mm to 35 mm, length <= 30 m, for slides 3702 54 Photographic film, sensitised, in rolls, unexposed, with perforations, for colour photography “polychrome”, width > 16 mm but <= 35 mm, length <= 30 m (excluding of paper, paperboard and textiles; for slides) 3702 55 Other film, for colour photography

(polychrome) - Of a width exceeding 16 mm but not exceeding 35 mm and of a length exceeding 30 m 3702 56 Other film, for colour photography

(polychrome) - Of a width exceeding 35 mm 3702 96 Photographic film, sensitised, in rolls, unexposed, with perforations, for monochrome photography, width <= 35 mm, length <= 30 m (excluding of paper, paperboard and textiles; x- ray film) 3702 97 Other film, for colour photography

(polychrome) - Of a width not exceeding 35 mm and of a length exceeding 30 m.

3702 98 Photographic film, sensitised, in rolls, unexposed, with perforations, for monochrome photography, width > 35 mm (excluding of paper, paperboard and textiles; x-ray film) 3703 10 Photographic paper, paperboard and textiles, sensitised, unexposed, in rolls > 610 mm wide 28Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 3703 20 Photographic paper, paperboard and textiles, sensitised, unexposed, for colour photography ‘polychrome’ (excluding products in rolls > 610 mm wide) 3703 90 Photographic paper, paperboard and textiles, sensitised, unexposed, for monochrome photography (excluding products in rolls > 610 mm wide) 3705 Photographic plates and film, exposed and developed (excluding products made of paper, paperboard or textiles, cinematographic film and ready-to-use printing plates) 3706 10 Cinematographic film, exposed and developed, whether or not incorporating soundtrack or consisting only of soundtrack, width >= 35 mm 3706 90 Cinematographic film, exposed and developed, whether or not incorporating soundtrack or consisting only of soundtrack, width < 35 mm 3801 20 Colloidal or semi-colloidal graphite 3806 20 Salts of rosin, of resin acids or of derivatives of rosin or resin acids (excluding salts of rosin adducts) 3807 Wood tar; wood tar oils; wood creosote; wood naphtha; vegetable pitch; brewer’s pitch and similar preparations based on rosin, resin acids or vegetable pitch (excluding burgundy pitch, yellow pitch, stearin pitch, fatty acid pitch, fatty tar and glycerin pitch) 3809 10 Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations such as dressings and mordants of a kind used in the textile, paper, leather or like industries, n.e.s., with a basis of amylaceous substances 3809 91 Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the textile or similar industries, n.e.s. (excluding those with a basis of amylaceous substances) 3809 92 Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the paper or similar industries, n.e.s. (excluding those with a basis of amylaceous substances) 29Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 3809 93 Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the leather or similar industries, n.e.s. (excluding those with a basis of amylaceous substances) 3810 10 Pickling preparations for metal surfaces;

soldering, brazing or welding pastes and powders consisting of metal and other materials 3810 90 Fluxes and other auxiliary preparations for soldering, brazing or welding; preparations of a kind used as cores or coatings for welding electrodes or rods (excluding soldering, brazing or welding powders and pastes consisting of metal and other materials, and welding electrodes or rods of base metals or metal carbides coated with fluxes) 3811 Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti- corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils 3813 Preparations and charges for fire-extinguishers;

charged fire-extinguishing grenades (excluding full or empty fire-extinguishing devices, whether or not portable, unmixed chemically undefined products with fire-extinguishing properties in other forms) 3814 Organic composite solvents and thinners, n.e.s.;

prepared paint or varnish removers (excluding nail varnish remover) 3815 11 Supported catalysts with nickel or a nickel compound as the active substance, n.e.s.

3815 12 Supported catalysts with precious metal or a precious-metal compound as the active substance, n.e.s.

3815 19 Supported catalysts, n.e.s. (excluding with precious metal, a precious-metal compound, nickel or a nickel compound as the active substance) 3815 90 Reaction initiators, reaction accelerators and catalytic preparations, n.e.s. (excluding rubber accelerators and supported catalysts) 30Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 3817 Mixed alkylbenzenes and mixed alkylnaphthalenes, other than those of heading 2707 or 2902 3818 Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms;

chemical compounds doped for use in electronics 3820 Anti-freezing preparations and prepared de- icing fluids (excluding prepared additives for mineral oils or other liquids used for the same purposes as mineral oils) 3823 13 Tall oil fatty acids, industrial 3824 99 Chemical products and preparations of the chemical or allied industries, including those consisting of mixtures of natural products, n.e.s. - Other 3825 90 Residual products of the chemical or allied industries, n.e.s. (excluding waste) 3826 Biodiesel and mixtures thereof, not containing or containing < 70 % by weight of petroleum oils or oils obtained from bituminous minerals 3827 90 Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included (excluding those of subheadings 3827 11 to 3827 69) 3901 40 Ethylene-alpha-olefin copolymers, having a specific gravity of < 0.94, in primary forms 3905 12 Poly “vinyl acetate”, in aqueous dispersion 3905 19 Poly “vinyl acetate”, in primary forms (excluding in aqueous dispersion) 3905 21 Vinyl acetate copolymers, in aqueous dispersion 3905 29 Vinyl acetate copolymers, in primary forms (excluding in aqueous dispersion) 3905 30 Poly “vinyl alcohol”, in primary forms, whether or not containing unhydrolyzed acetate groups 3905 91 Copolymers of vinyl, in primary forms (excluding vinyl chloride-vinyl acetate copolymers and other vinyl chloride copolymers, and vinyl acetate copolymers) 3905 99 Polymers of vinyl esters and other vinyl polymers, in primary forms (excluding those of vinyl chloride or other halogenated olefins, poly “vinyl acetate”, vinyl acetate copolymers 31Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) and poly “vinyl alcohol”, whether or not containing unhydrolised acetate groups) 3906 10 Poly‘methyl methacrylate’, in primary forms 3906 90 Acrylic polymers, in primary forms (excluding poly‘methyl methacrylate’) 3907 21, 3907 29 Polyethers, in primary forms (excluding polyacetals) 3907 40 Polycarbonates, in primary forms 3907 70 Poly‘lactic acid’, in primary forms 3907 91 Unsaturated polyallyl esters and other polyesters, in primary forms (excluding polycarbonates, alkyd resins, poly‘ethylene terephthalate’ and poly‘lactic acid’) 3908 10 Polyamides-6, -11, -12, -6,6, -6,9, -6,10 or -6,12, in primary forms 3908 90 Polyamides, in primary forms (excluding polyamides-6, -11, -12, -6,6, -6,9, -6,10 and -6,12) 3915 20 Waste, parings and scrap, of polymers of styrene 3922 90 Bidets, lavatory pans, flushing cisterns and similar sanitary ware, of plastics (excluding baths, shower-baths, sinks, washbasins, lavatory seats and covers) 4002 11 Styrene-butadiene rubber latex ‘sbr’;

carboxylated styrene-butadiene rubber latex ‘xsbr’ 4002 19 Styrene-butadiene rubber “sbr”; carboxylated styrene-butadiene rubber “xsbr”, in primary forms or in plates, sheets or strip (excluding latex) 4002 20 Butadiene rubber ‘br’, in primary forms or in plates, sheets or strip 4002 31 Isobutylene isoprene rubber ‘iir’, in primary forms or in plates, sheets or strip 4002 39 Halo-isobutene-isoprene rubber ‘ciir’ or ‘biir’, in primary forms or in plates, sheets or strip 4002 41 Chloroprene latex ‘chlorobutadiene rubber, cr’ 4002 49 Chloroprene “chlorobutadiene rubber, cr”, in primary forms or in plates, sheets or strip (excluding latex) 4002 51 Latex of acrylonitrile-butadiene rubber ‘nbr’ 32Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 4002 59 Acrylonitrile-butadiene rubber “nbr”, in primary forms or in plates, sheets or strip (excluding latex) 4002 60 Isoprene rubber “ir”, in primary forms or in plates, sheets or strip 4002 70 Ethylene-propylene diene rubber “epdm”, non-conjugated, in primary forms or in plates, sheets or strip 4002 80 Mixtures of natural rubber, balata, gutta-percha, guayule, chicle or similar types of natural rubber with synthetic rubber or factice, in primary forms or in plates, sheets or strip 4002 91 Synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip (excluding styrene-butadiene rubber ‘sbr’, carboxylated styrene-butadiene rubber ‘xsbr’, butadiene rubber ‘br’, isobutylene isoprene rubber ‘iir’, halo-isobutene-isoprene rubber ‘ciir’ or ‘biir’, chloroprene rubber ‘cr’, acrylonitrile-butadiene rubber ‘nbr’, isoprene rubber ‘ir’ and non-conjugated ethylene- propylene diene rubber ‘epdm’) 4002 99 Synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip (excluding latex, styrene-butadiene rubber ‘sbr’, carboxylated styrene-butadiene rubber ‘xsbr’, butadiene rubber ‘br’, isobutylene isoprene rubber ‘iir’, halo-isobutene-isoprene rubber ‘ciir’ or ‘biir’, chloroprene rubber ‘cr’, acrylonitrile-butadiene rubber ‘nbr’, isoprene rubber ‘ir’ and non-conjugated ethylene- propylene diene rubber ‘epdm’) 4005 10 Rubber, unvulcanised, compounded with carbon black or silica, in primary forms or in plates, sheets or strip 4005 20 Compounded rubber, unvulcanised, in the form of solutions or dispersions (excluding rubber compounded with carbon black or silica, and mixtures of natural rubber, balata, gutta- percha, guayule, chicle and similar natural gums containing synthetic rubber or factice derived from oils) 4005 91 Compounded rubber, unvulcanised, in the form of plates, sheets or strip (excluding rubber compounded with carbon black or silica, and mixtures of natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums 33Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) containing synthetic rubber or factice derived from oils) 4005 99 Compounded, unvulcanised rubber in primary forms (excluding solutions and dispersions, those containing carbon black or silica, mixtures of natural rubber, balata, gutta-percha, guayule, chicle or similar types of natural rubber with synthetic rubber or factice, and those in the form of plates, sheets or strip) 4006 10 “Camel-back” strips of unvulcanised rubber, for retreading rubber tyres 4006 90 Rods, bars, tubes, profiles and other forms of unvulcanised rubber, including mixed rubber, and articles of unvulcanised rubber, including mixed rubber (excluding plates, sheets and strip which, apart from basic surface-working, have not been cut, or have merely been cut into square or rectangular shapes, and “camel-back” strips) 4008 21 Plates, sheets and strip, of non-cellular rubber 4009 12 Tubes, pipes and hoses, of vulcanised rubber (excluding hard rubber), not reinforced or otherwise combined with other materials, with fittings 4009 41 Tubes, pipes and hoses, of vulcanised rubber (excluding hard rubber), reinforced or otherwise combined with materials other than metal or textile materials, without fittings 4010 11 Conveyor belts or belting, of vulcanised rubber, reinforced only with metal 4010 12 Conveyor belts or belting, of vulcanised rubber, reinforced only with textile materials 4010 19 Conveyor belts or belting, of vulcanised rubber (excluding reinforced only with metal or only with textile materials) 4010 31 Endless transmission belts of trapezoidal cross-

section ‘v-belts’, of vulcanised rubber, v- ribbed, of an outside circumference > 60 cm but <= 180 cm 4010 32 Endless transmission belts of trapezoidal cross-

section “v-belts”, of vulcanised rubber, of an outside circumference > 60 cm but <= 180 cm (excluding v-ribbed) 4010 33 Endless transmission belts of trapezoidal cross-

section ‘v-belts’, of vulcanised rubber, v- 34Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) ribbed, of an outside circumference > 180 cm but <= 240 cm 4010 34 Endless transmission belts of trapezoidal cross-

section “v-belts”, of vulcanised rubber, of an outside circumference > 180 cm but <= 240 cm (excluding v-ribbed) 4010 35 Endless synchronous belts, of vulcanised rubber, of an outside circumference > 60 cm but <= 150 cm 4010 36 endless synchronous belts, of vulcanised rubber, of an outside circumference > 150 cm but <= 198 cm 4010 39 Transmission belts or belting, of vulcanised rubber (excluding endless transmission belts of trapezoidal cross-section ‘v-belts’, v-ribbed, of an outside circumference > 60 cm but <= 240 cm and endless synchronous belts of an outside circumference > 60 cm but <= 198 cm) 4011 20 New pneumatic tyres, of rubber, of a kind used for buses and lorries (excluding tyres with lug, corner or similar treads) 4011 30 New pneumatic tyres, of rubber, of a kind used on aircraft 4012 11 Retreaded pneumatic tyres, of rubber, of a kind used on motor cars ‘including station wagons and racing cars’ 4012 12 Retreaded pneumatic tyres, of rubber, of a kind used on buses or lorries 4012 13 Retreaded pneumatic tyres, of rubber, of a kind used on aircraft 4012 19 Retreaded pneumatic tyres, of rubber (excluding of a kind used on motor cars, station wagons, racing cars, buses, lorries and aircraft) 4012 20 Used pneumatic tyres of rubber 4012 90 Solid or cushion tyres, interchangeable tyre treads and tyre flaps, of rubber 4016 93 Gaskets, washers and other seals, of vulcanised rubber (excluding hard rubber and those of cellular rubber) 4407 Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end- jointed, of a thickness exceeding 6 mm 4408 10 Sheets for veneering, including those obtained by slicing laminated wood, for coniferous 35Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm 4411 13 Medium density fibreboard ‘mdf’ of wood, of a thickness > 5 mm but <= 9 mm 4411 94 Fibreboard of wood and other ligneous materials 4412 Plywood, veneered panels and similar laminated wood, whether or not agglomerated with resins or other organic bonding agents, of a density of <= 90.5 g/cm3 (excluding medium density fibreboard (“mdf”)) 4416 Casks, barrels, vats, tubs and other coopers’ products parts thereof, of wood, including staves 4418 40 Wooden shuttering for concrete constructional work (excluding plywood boarding) 4418 79 Flooring panels, assembled, of wood other than bamboo (excluding multilayer panels and panels for mosaic floors) 4418 81, 4418 82, 4418 83, 4418 89 Posts and beams, of wood 4503 10 Corks and stoppers of all types, of natural cork, including round-edged blanks 4503 90 Articles of natural cork (excluding cork in square or rectangular blocks, plates, sheets or strips; corks, stoppers and cork blanks;

footwear and parts thereof; insoles, whether or not removable; headgear and parts thereof; plugs and dividers for shotgun cartridges; toys, games and sports equipment and parts thereof) 4504 10 Tiles of any shape, blocks, plates, sheets and strip, solid cylinders, including discs of agglomerated cork 4504 90 Agglomerated cork, with or without a binding substance, and articles of agglomerated cork (excluding footwear and parts thereof; insoles, whether or not removable; headgear and parts thereof; plugs and dividers for shotgun cartridges; toys, games and sports equipment and parts thereof; blocks, plates, sheets or strips; tiles of any shape; solid cylinders, including discs) 4701 Mechanical wood pulp, not chemically treated 36Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 4703 11 Unbleached coniferous chemical wood pulp, soda or sulphate (excluding dissolving grades) 4703 19 Unbleached non-coniferous chemical wood pulp, soda or sulphate (excluding dissolving grades) 4703 21 Semi-bleached or bleached coniferous chemical wood pulp, soda or sulphate (excluding dissolving grades) 4703 29 Semi-bleached or bleached non-coniferous chemical wood pulp, soda or sulphate (excluding dissolving grades) 4704 11 Unbleached coniferous chemical wood pulp, sulphite (excluding dissolving grades) 4704 19 Unbleached non-coniferous chemical wood pulp, sulphite (excluding dissolving grades) 4704 21 Semi-bleached or bleached coniferous chemical wood pulp, sulphite (excluding dissolving grades) 4704 29 Semi-bleached or bleached non-coniferous chemical wood pulp, sulphite (excluding dissolving grades) 4705 Wood pulp obtained by a combination of mechanical and chemical pulping processes 4706 10 Cotton linters pulp 4706 20 Pulps of fibres derived from recovered “waste and scrap” paper or paperboard 4706 30 Pulps of fibrous cellulosic bamboo material 4706 91 Mechanical pulp of fibrous cellulosic material (excluding that of bamboo, wood, cotton linters and fibres derived from recovered (waste and scrap) paper or paperboard) 4706 92 Chemical pulp of fibrous cellulosic material (excluding that of bamboo, wood, cotton linters and fibres derived from recovered (waste and scrap) paper or paperboard) 4706 93 Semi-chemical pulp of fibrous cellulosic material (excluding that of bamboo, wood, cotton linters and fibres derived from recovered (waste and scrap) paper or paperboard)) 4707 10 Recovered “waste and scrap” paper or paperboard of unbleached kraft paper, corrugated paper or corrugated paperboard 37Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 4707 20 Recovered “waste and scrap” paper or paperboard made mainly of bleached chemical pulp, not coloured in the mass 4707 30 Recovered “waste and scrap” paper or paperboard made mainly of mechanical pulp, e.g. newspapers, journals and similar printed matter 4707 90 Recovered “waste and scrap” paper or paperboard, including unsorted waste and scrap (excluding waste and scrap of unbleached kraft paper or kraft paperboard, or of corrugated paper or corrugated paperboard, that of paper or paperboard made mainly of bleached chemical pulp not coloured in the mass, that of paper or paperboard made mainly of mechanical pulp, and paper wool) 4802 20 Paper and paperboard of a kind used as a base for photosensitive, heat-sensitive or electrosensitive paper and paperboard, uncoated, in rolls or in square or rectangular sheets, of any size 4802 40 Wallpaper base, uncoated 4802 58 Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls or in square or rectangular sheets, of any size, not containing fibres obtained by a mechanical or chemi- mechanical process or of which <= 10 % by weight of the total fibre content consists of such fibres, weighing > 150 g/m2, n.e.s.

4802 61 Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch- tape paper, in rolls of any size, of which > 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi- mechanical process, n.e.s.

4804 11 Unbleached kraftliner, uncoated, in rolls of a width > 36 cm 4804 19 Kraftliner, uncoated, in rolls of a width > 36 cm (excluding unbleached and goods of heading 4802 and 4803) 4804 21 Unbleached sack kraft paper, uncoated, in rolls or sheets, other than that of heading 4802 or 4803 38Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 4804 29 Sack kraft paper, uncoated, in rolls or sheets (excluding unbleached, and goods of heading 4802 or 4803) 4804 31 Unbleached kraft paper and paperboard, uncoated, weighing <= 150 g/m2 (excluding kraftliner, sack kraft paper and goods of heading 4802 or 4803) 4804 39 Kraft paper and paperboard, uncoated, weighing <= 150 g/m2 (excluding unbleached, kraftliner, sack kraft paper and goods of heading 4802 or 4803) 4804 41 Unbleached kraft paper and paperboard, uncoated, weighing > 150 g/m2 to < 225 g/ m2 (excluding kraftliner, sack kraft paper, and goods of heading 4802 or 4803) 4804 42 Kraft paper and paperboard, uncoated, weighing > 150 g/m2 to < 225 g/m2, bleached uniformly in the mass and containing > 95 % chemically processed wood fibre by weight in relation to the total fibre content consists of wood fibres obtained by a chemical process (excluding unbleached, kraftliner, sack kraft paper, and goods of heading 4802 or 4803) 4804 49 Kraft paper and paperboard, uncoated, weighing > 150 g/m2 to < 225 g/m2 (excluding unbleached, bleached uniformly in the mass and containing > 95 % chemically processed wood fibre by weight in relation to the total fibre content consists of wood fibres obtained by a chemical process, kraftliner, sack kraft paper, and goods of heading 4802 or 4803) 4804 51 Unbleached kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing >= 225 g/m² (excluding kraftliner, sack kraft paper and goods of heading 4802, 4803 or 4808) 4804 52 Kraft paper and paperboard, uncoated, in rolls or rectangular sheets, weighing >= 225 g/m2, bleached uniformly in the mass, containing > 95 % chemically processed wood fibre by weight in relation to the total fibre content (excluding unbleached, kraftliner, sack kraft paper and goods of heading 4802 or 4803) 39Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 4804 59 Kraft paper and paperboard, uncoated, in rolls or rectangular sheets, weighing >= 225 g/m2 (excluding unbleached, bleached uniformly in the mass, containing > 95 % chemically processed wood fibre by weight in relation to the total fibre content, kraftliner, sack kraft paper and goods of heading 4802 or 4803) 4805 11 Semi-chemical fluting paper, uncoated, in rolls of a width > 36 cm 4805 12 Straw fluting paper, in rolls of a width > 36 cm, weighing >= 130 g/m² 4805 19 Fluting paper, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excluding semi-chemical fluting paper and straw fluting paper) 4805 24 Testliner “recycled liner board”, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2 4805 25 Testliner ‘recycled liner board’, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g/m2 4805 30 Sulphite wrapping paper, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state 4805 40 Filter paper and paperboard, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state 4805 50 Felt paper and paperboard, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state 4805 91 Paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2, n.e.s.

4805 92 Paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side 40Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) > 15 cm in the unfolded state, weighing > 150 g/m2 to < 225 g/m2, n.e.s.

4805 93 Paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing >= 225 g/m², n.e.s.

4806 10 Vegetable parchment, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state 4806 20 Greaseproof papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state 4806 30 Tracing papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state 4806 40 Glassine and other glazed transparent or translucent papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excluding vegetable parchment, greaseproof papers and tracing papers) 4807 Composite paper and paperboard ‘made by sticking flat layers of paper or paperboard together with an adhesive’, not surface-coated or impregnated, whether or not internally reinforced, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state 4808 10 Corrugated paper and paperboard “with or without glued flat surface sheets”, whether or not perforated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state 4808 40 Kraft paper, creped or crinkled, whether or not embossed or perforated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state 4808 90 Paper and paperboard, creped, crinkled, embossed or perforated, in rolls of a width > 36 cm or in square or rectangular sheets with one 41Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) side > 36 cm and the other side > 15 cm in the unfolded state (excluding sack kraft and other kraft paper, and goods of heading 4803) 4809 20 Self-copy paper, whether or not printed, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excluding carbon and similar copying papers) 4809 90 Transfer papers, including coated or impregnated paper for duplicator stencils or offset plates, whether or not printed, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excluding self- copy paper) 4810 13 Paper and paperboard used for writing, printing or other graphic purposes, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10 % by weight of the total fibre content consists of such fibres, coated on one or both sides with kaolin or other inorganic substances, in rolls of any size 4810 14 Paper and paperboard used for writing, printing or other graphic purposes, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10% by weight of the total fibre content consists of such fibres, coated on one or both sides with kaolin or other inorganic substances, in square or rectangular sheets with one side <= 435 mm and the other side <= 297 mm in the unfolded state 4810 19 Paper and paperboard used for writing, printing or other graphic purposes, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10 % by weight of the total fibre content consists of such fibres, coated on one or both sides with kaolin or other inorganic substances, in square or rectangular sheets with one side > 435 mm or with one side <= 435 mm and the other side > 297 mm in the unfolded state 4810 22 Lightweight coated paper used for writing, printing or other graphic purposes, total weight <= 72 g/m2, coating weight <= 15 g/m2 per side, on a base of which >= 50 % by weight of the total fibre content consists of fibres obtained by a mechanical process, coated on both sides with kaolin or other inorganic 42Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) substances, in rolls or in square or rectangular sheets, of any size 4810 29 Paper and paperboard used for writing, printing or other graphic purposes, of which > 10% by weight of the total fibre content consists of fibres obtained by a mechanical or chemi- mechanical process, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size (excluding lightweight paper) 4810 31 Kraft paper and paperboard, bleached uniformly throughout the mass and containing > 95 % chemically processed wood fibres by weight in relation to the total fibre content, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size, weighing <= 150 g/m2 (excluding that for writing, printing or other graphic purposes) 4810 32 Kraft paper and paperboard, bleached uniformly throughout the mass and containing > 95% chemically processed wood fibres by weight in relation to the total fibre content, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size, weighing > 150 g/m² (excluding that for writing, printing or other graphic purposes) 4810 39 Kraft paper and paperboard, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size (excluding that for writing, printing or other graphic purposes; paper and paperboard bleached uniformly in the mass and containing > 95 % chemically processed wood fibres by weight in relation to the total fibre content) 4810 92 Multi-ply paper and paperboard, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size (excluding that for writing, printing or other graphic purposes, kraft paper and paperboard) 4810 99 Paper and paperboard, coated on one or both sides with kaolin “china clay” or other inorganic substances, with or without a binder, and with no other coating, whether or not surface-coloured, surface-decorated or printed, 43Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) in rolls or in square or rectangular sheets, of any size (excluding that for writing, printing or other graphic purposes, kraft paper and paperboard, multi-ply paper and paperboard, and with no other coating) 4811 10 Tarred, bituminised or asphalted paper and paperboard, in rolls or in square or rectangular sheets, of any size 4811 51 Paper and paperboard, surface-coloured, surface-decorated or printed, coated, impregnated or covered with artificial resins or plastics, in rolls or in square or rectangular sheets, of any size, bleached and weighing > 150 g/m2 (excluding adhesives) 4811 59 Paper and paperboard, surface-coloured, surface-decorated or printed, coated, impregnated or covered with artificial resins or plastics, in rolls or in square or rectangular sheets, of any size (excluding bleached and weighing > 150 g/m2, and adhesives) 4811 60 Paper and paperboard, coated, impregnated or covered with wax, paraffin wax, stearin, oil or glycerol, in rolls or in square or rectangular sheets, of any size (excluding goods of heading 4803, 4809 and 4818) 4811 90 Paper, paperboard, cellulose wadding and webs of soft cellulose, coated, impregnated, covered, surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excluding goods of headings 4803, 4809, 4810 and 4818, and of subheading 4811 10 to 4811 60) 4814 90 Wallpaper and similar wallcoverings of paper, and window transparencies of paper (excluding wallcoverings of paper, consisting of paper coated or covered, on the face side, with a grained, embossed, coloured or design-printed or otherwise decorated layer of plastics) 4819 20 Folding cartons, boxes and cases, of non- corrugated paper or paperboard 4822 10 Bobbins, spools, cops and similar supports of paper pulp, paper or paperboard, whether or not perforated or hardened, for winding textile yarn 4822 90 Bobbins, spools, cops and similar supports of paper pulp, paper or paperboard, whether or not perforated or hardened (excluding those for winding textile yarn) 44Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 4823 20 Filter paper and paperboard, in strips or rolls of a width <= 36 cm, in rectangular or square sheets, of which no side > 36 cm in the unfolded state, or cut to shape other than rectangular or square 4823 40 Rolls, sheets and dials, printed for self- recording apparatus, in rolls of a width <= 36 cm, in rectangular or square sheets of which no side > 36 cm in the unfolded state, or cut into dials 4823 61 Trays, dishes, plates, cups and the like, of bamboo paper or bamboo paperboard 4823 69 Trays, dishes, plates, cups and the like, of paper or paperboard (excluding of bamboo paper or bamboo paperboard) 4823 70 Moulded or pressed articles of paper pulp, n.e.s.

4823 90 Paper, paperboard, cellulose wadding and webs of cellulose fibres, in strips or rolls of a width <= 36 cm, in rectangular or square sheets, of which no side > 36 cm in the unfolded state, or cut to shape other than rectangular or square, and articles of paper pulp, paper, cellulose wadding or webs of cellulose fibres, n.e.s.

5105 10 Wool, carded 5105 21 Wool, combed, in fragments “open tops” 5105 29 Wool, combed (excluding that in fragments “open tops”) 5105 31 Hair of kashmir “cashmere” goats, carded or combed 5105 39 Fine animal hair, carded or combed (excluding wool and hair of kashmir “cashmere” goats) 5105 40 Coarse animal hair, carded or combed 5106 10 Carded wool yarn containing >= 85 % wool by weight (excluding that put up for retail sale) 5106 20 Carded wool yarn containing predominantly, but < 85 % wool by weight (excluding that put up for retail sale) 5107 10 Yarn of combed wool containing >= 85% wool by weight (excluding that put up for retail sale) 5107 20 Yarn of combed wool containing predominantly, but < 85 % wool by weight (excluding that put up for retail sale) 45Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 5112 11 Woven fabrics containing >= 85 % combed wool or combed fine animal hair by weight and weighing <= 200 g/m2 (excluding fabrics for technical uses of heading 5911 ) 5112 19 Woven fabrics containing >= 85 % combed wool or combed fine animal hair by weight and weighing > 200 g/m2 5112 20 Woven fabrics containing predominantly, but < 85% combed wool or combed fine animal hair by weight, mixed principally or solely with synthetic or artificial filaments (excluding fabrics for technical uses of heading 5911) 5112 30 Woven fabrics containing predominantly, but < 85% combed wool or combed fine animal hair by weight, mixed principally or solely with synthetic or artificial staple fibres (excluding fabrics for technical uses of heading 5911) 5112 90 Woven fabrics containing predominantly, but < 85% combed wool or combed fine animal hair by weight (excluding those mixed principally or solely with synthetic or artificial filaments or staple fibres and fabrics for technical uses of heading 5911) 5205 11 Single cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of >= 714.29 decitex “<= mn 14” (excluding sewing thread and yarn put up for retail sale) 5205 12 Single cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of 232.56 decitex to < 714.29 decitex “> mn 14 to mn 43” (excluding sewing thread and yarn put up for retail sale) 5205 13 Single cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of 192.31 decitex to < 232.56 decitex “> mn 43 to mn 52” (excluding sewing thread and yarn put up for retail sale) 5205 14 Single cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of 125 decitex to < 192.31 decitex “> mn 52 to mn 80” (excluding sewing thread and yarn put up for retail sale) 5205 15 Single cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of < 125 decitex “> mn 46Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 80” (excluding sewing thread and yarn put up for retail sale) 5205 21 Single cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of 232.56 decitex to < 714.29 decitex “> mn 14 to mn 43” (excluding sewing thread and yarn put up for retail sale) 5205 22 Single cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of 232.56 decitex to < 714.29 decitex “> mn 14 to mn 43” (excluding sewing thread and yarn put up for retail sale) 5205 23 Single cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of 192.31 decitex to < 232.56 decitex “> mn 43 to mn 52” (excluding sewing thread and yarn put up for retail sale) 5205 24 Single cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of 125 decitex to < 192.31 decitex “> mn 52 to mn 80” (excluding sewing thread and yarn put up for retail sale) 5205 26 Single cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of 106.38 decitex to < 125 decitex “> mn 80 to mn 94” (excluding sewing thread and yarn put up for retail sale) 5205 27 Single cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of 83.33 decitex to < 106.38 decitex “> mn 94 to mn 120” (excluding sewing thread and yarn put up for retail sale) 5205 28 Multiple “folded” or cabled cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of >= 714.29 decitex “<= mn 14” per single yarn (excluding sewing thread and yarn put up for retail sale) 5205 31 Multiple “folded” or cabled cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of >= 714.29 decitex “<= mn 14” per single yarn (excluding sewing thread and yarn put up for retail sale) 5205 32 Multiple “folded” or cabled cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of 232.56 decitex to < 714.29 decitex “> mn 14 to mn 43” 47Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) per single yarn (excluding sewing thread and yarn put up for retail sale) 5205 33 Multiple “folded” or cabled cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of 192.31 decitex to < 232.56 decitex “> mn 43 to mn 52” per single yarn (excluding sewing thread and yarn put up for retail sale) 5205 34 Multiple “folded” or cabled cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of 125 decitex to < 192.31 decitex “> mn 52 to mn 80” per single yarn (excluding sewing thread and yarn put up for retail sale) 5205 35 Multiple “folded” or cabled cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of < 125 decitex “> mn 80” per single yarn (excluding sewing thread and yarn put up for retail sale) 5205 41 Multiple “folded” or cabled cotton yarn, of uncombed fibres, containing >= 85% cotton by weight and with a linear density of 232.56 decitex to < 714.29 decitex “> mn 14 to mn 43” single yarn (excluding sewing thread and yarn put up for retail sale) 5205 42 Multiple “folded” or cabled cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of 232.56 decitex to < 714.29 decitex “> mn 14 to mn 43” per single yarn (excluding sewing thread and yarn put up for retail sale) 5205 43 Multiple “folded” or cabled cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of 192.31 decitex to < 232.56 decitex “> mn 43 to mn 52” per single yarn (excluding sewing thread and yarn put up for retail sale) 5205 44 Multiple “folded” or cabled cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of 125 decitex to < 192.31 decitex “> mn 52 to mn 80” per single yarn (excluding sewing thread and yarn put up for retail sale) 5205 46 Multiple “folded” or cabled cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of 106.38 decitex to < 125 decitex “> mn 80 to mn 94” 48Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) per single yarn (excluding sewing thread and yarn put up for retail sale) 5205 47 Multiple “folded” or cabled cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of 83.33 decitex to < 106.38 decitex “> mn 94 to mn 120” per single yarn (excluding sewing thread and yarn put up for retail sale) 5205 48 Multiple “folded” or cabled cotton yarn, of combed fibres, containing >= 85% cotton by weight and with a linear density of < 83.33 decitex “> mn 120” per single yarn (excluding sewing thread and yarn put up for retail sale) 5206 42 Plain woven fabrics of cotton, containing > = 85% cotton by weight and weighing > 200 g/m 2, unbleached 5209 11 Plain woven fabrics of cotton, containing >= 85 % cotton by weight and weighing > 200 g/m2, unbleached 5211 11 Plain woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m², unbleached 5211 12 Woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m², in three-thread or four-thread twill, including cross twill, unbleached 5211 19 Woven fabrics of cotton, containing predominantly, but < 85 % cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, unbleached (excluding those in three-thread or four-thread twill, including cross twill, and plain woven fabrics) 5211 20 Woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m², bleached 5211 31 Plain woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m², dyed 5211 32 Woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, 49Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) mixed principally or solely with man-made fibres and weighing > 200 g/m², in three-thread or four-thread twill, including cross twill, dyed 5211 39 Woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man- made fibres and weighing > 200 g/m², dyed (excluding those in three-thread or four-thread twill, including cross twill, and plain woven fabrics) 5211 41 Plain woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m², made of yarn of different colours 5211 42 Denim, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/ m², made of yarn of different colours 5211 43 Woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m², in three-thread or four-thread twill, including cross twill, made of yarn of different colours 5211 49 Woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m², made of yarn of different colours (excluding those in three- thread or four-thread twill, including cross twill, and plain woven fabrics) 5211 51 Plain woven fabrics of cotton, containing predominantly, but < 85 % cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, printed 5211 52 Woven fabrics of cotton, containing predominantly, but < 85% cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m², in three-thread or four-thread twill, including cross twill, printed 5211 59 Woven fabrics of cotton, containing predominantly, but < 85 % cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, printed (excluding those in three-thread or four-thread 50Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) twill, including cross twill, and plain woven fabrics) 5308 10 Coconut “coir” yarn 5308 20 Hemp yarn 5308 90 Yarn of vegetable textile fibres (excluding flax yarn, yarn of jute or of other textile bast fibres of heading 5303, coconut “coir” yarn, hemp yarn and cotton yarn) 5402 63 Multiple “folded” or cabled filament yarn of polypropylene, including monofilament of < 67 decitex (excluding sewing thread, yarn put up for retail sale and textured yarn) 5403 10 High-tenacity yarn of viscose rayon filament (excluding sewing thread and yarn put up for retail sale) 5403 31 Yarn of viscose rayon filament, including monofilament of < 67 decitex, single, untwisted or with a twist of <= 120 turns per metre (excluding sewing thread, high-tenacity yarn and yarn put up for retail sale) 5403 32 Yarn of viscose rayon filament, including monofilament of < 67 decitex, single, with a twist of > 120 turns per metre (excluding sewing thread, high-tenacity yarn and yarn put up for retail sale) 5403 33 Filament yarn of cellulose acetate, including monofilament of < 67 decitex, single (excluding sewing thread, high-tenacity yarn and yarn put up for retail sale) 5403 39 Artificial filament yarn, including artificial monofilament of < 67 decitex, single (excluding sewing thread, filament yarn of viscose or cellulose acetate and yarn put up for retail sale) 5403 41 Multiple “folded” or cabled filament yarn of viscose rayon, including monofilament of < 67 decitex (excluding sewing thread, high-tenacity yarn and yarn put up for retail sale) 5403 42 Multiple ‘folded’ or cabled filament yarn of cellulose acetate, including monofilament of < 67 decitex (excluding sewing thread, high- tenacity yarn and yarn put up for retail sale) 5403 49 Multiple “folded” or cabled artificial filament yarn, including artificial monofilament of < 67 decitex (excluding sewing thread, filament yarn 51Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) of viscose or cellulose acetate and yarn put up for retail sale) 5404 11 Elastomeric monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm 5404 12 Polypropylene monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm (excluding elastomers) 5404 19 Synthetic monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm (excluding elastomers and polypropylene) 5404 90 Strip and the like, e.g. artificial straw, of synthetic textile material, with an apparent width of <= 5 mm 5407 30 Woven fabrics of synthetic filament yarn, including monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm, consisting of layers of parallel textile yarns superimposed on each other at acute or right angles, the layers being bonded at the intersections of the yarns by an adhesive or by thermal bonding 5501 11 Filament tow as specified in note 1 to Chapter 55, of aramids 5501 19 Filament tow as specified in note 1 to Chapter 55, of nylon or other polyamides (excluding of aramids) 5501 20 Filament tow as specified in note 1 to Chapter 55, of polyesters 5501 30 Filament tow as specified in note 1 to Chapter 55, acrylic or modacrylic 5501 40 Synthetic filament tow as specified in note 1 to

Chapter 55, of polypropylene 5501 90 Synthetic filament tow as specified in note 1 to Chapter 55 (excluding that of acrylic, modacrylic, polyesters, polypropylene, nylon or other polyamide filament) 5502 10 Artificial filament tow as specified in note 1 to

Chapter 55, of acetate 5502 90 Artificial filament tow, as specified in note 1 to

Chapter 55 (excluding of acetate) 5503 11 Staple fibres of aramids, not carded, combed or otherwise processed for spinning 52Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 5503 19 Staple fibres of nylon or other polyamides, not carded, combed or otherwise processed for spinning (excluding those of aramids) 5503 20 Staple fibres of polyesters, not carded, combed or otherwise processed for spinning 5503 30 Acrylic or modacrylic staple fibres, not carded, combed or otherwise processed for spinning 5503 40 Staple fibres of polypropylene, not carded, combed or otherwise processed for spinning 5503 90 Synthetic staple fibres, not carded, combed or otherwise processed for spinning (excluding those of polypropylene, acrylic, modacrylic, polyesters, nylon or other polyamides) 5504 90 Artificial staple fibres, not carded, combed or otherwise processed for spinning (excluding those of viscose rayon) 5506 10 Staple fibres of nylon or other polyamides, carded, combed or otherwise processed for spinning 5506 20 Staple fibres of polyesters, carded, combed or otherwise processed for spinning 5506 30 Acrylic or modacrylic staple fibres, carded, combed or otherwise processed for spinning 5506 40 Staple fibres of polypropylene, carded, combed or otherwise processed for spinning 5506 90 Synthetic staple fibres carded, combed or otherwise processed for spinning (excluding acrylic, modacrylic, polyester, polypropylene, nylon or other polyamides) 5507 Artificial staple fibres, carded, combed or otherwise processed for spinning 5512 21 Woven fabrics containing >= 85 % acrylic or modacrylic staple fibres by weight, unbleached or bleached 5512 99 Woven fabrics containing >= 85 % synthetic staple fibres by weight, dyed, made of yarn of different colours or printed (excluding those of acrylic, modacrylic or polyester staple fibres) 5516 Woven fabrics of artificial staple fibres 5601 29 Wadding of textile materials and articles thereof (excluding of cotton or man-made fibres; sanitary towels and tampons, napkins and napkin liners for babies and similar sanitary articles, wadding and articles thereof, 53Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) impregnated or covered with medicated substances or put up for retail for medical, surgical, dental or veterinary purposes, or impregnated, coated or covered with perfumes, make-up, soaps, cleansing agents, etc.) 5601 30 Textile flock and dust and mill neps 5604 10 Textile-covered rubber thread and cord 5604 90 Textile yarn, strip and the like of heading 5404 and 5405, impregnated, coated, covered or sheathed with rubber or plastics (excluding imitation catgut, thread and cord with fish-hook attachments or otherwise put up as fishing line) 5605 Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405, of textile fibres, combined with metal in the form of thread, strip or powder or covered with metal (excluding yarns manufactured from a mixture of textile fibres and metal fibres, with anti-static properties;

yarns reinforced with metal wire; articles with the character of trimmings) 5607 41 Binder or baler twine, of polyethylene or polypropylene 5801 27 Warp pile fabrics, of cotton (excluding terry towelling and similar woven terry fabrics, tufted textile fabrics and narrow woven fabrics of heading 5806) 5803 Gauze (excluding narrow woven fabrics of heading 5806) 5806 40 Narrow fabrics consisting of warp without weft assembled by means of an adhesive “bolducs”, with a width of <= 30 cm 5901 10 Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books, the manufacture of boxes and articles of cardboard or the like 5901 90 Tracing cloth; prepared painting canvas;

buckram and similar stiffened textile fabrics of a kind used for hat foundations (excluding plastic-coated textile fabrics) 5905 Textile wallcoverings 5908 Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like;

incandescent gas mantles and tubular knitted gas-mantle fabric for incandescent gas mantles, whether or not impregnated (excluding wax- 54Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) covered wicks of the taper variety, fuses and detonating fuses, wicks in the form of textile yarn and glass-fibre wicks) 5910 Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material (excluding those of a thickness of < 3 mm and of indeterminate length or cut to length only, and those impregnated, coated, covered or laminated with rubber or made of yarn or cord impregnated or coated with rubber) 5911 10 Textile fabrics, felt and felt-lined woven fabrics, coated, covered or laminated with rubber, leather or other material, of a kind used for card clothing, and similar fabrics of a kind used for other technical purposes, including narrow fabrics made of velvet impregnated with rubber, for covering weaving spindles ‘weaving beams’ 5911 31 Textile fabrics and felts, endless or fitted with linking devices, of a kind used in papermaking or similar machines, e.g. for paper pulp or asbestos-cement, weighing < 650 g/m2 5911 32 Textile fabrics and felts, endless or fitted with linking devices, of a kind used in papermaking or similar machines, e.g. for paper pulp or asbestos-cement, weighing >= 650 g/m2 5911 40 Straining cloth of a kind used in oil-presses or for similar technical purposes, including that of human hair 6001 99 Pile fabrics, knitted or crocheted (excluding cotton or man-made fibres and ‘long pile’ fabrics) 6003 10 Knitted or crocheted fabrics of wool or fine animal hair, of a width of <= 30 cm (excluding those containing by weight >= 5% of elastomeric yarn or rubber thread, and pile fabrics, including “long pile”, looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated) 6003 20 Knitted or crocheted fabrics of cotton, of a width of <= 30 cm (excluding those containing by weight >= 5% of elastomeric yarn or rubber thread, and pile fabrics, including “long pile”, looped pile fabrics, labels, badges and similar 55Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated) 6003 30 Knitted or crocheted fabrics of synthetic fibres, of a width of <= 30 cm (excluding those containing by weight >= 5% of elastomeric yarn or rubber thread, and pile fabrics, including “long pile”, looped pile fabrics, labels, badges and similar articles, knitted or crocheted fabrics, impregnated, coated, covered or laminated, and sterile surgical or dental adhesion barriers of subheading 3006 10 30) 6003 40 Knitted or crocheted fabrics of artificial fibres, of a width of <= 30 cm (excluding those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, including ‘long pile’, looped pile fabrics, labels, badges and similar articles, knitted or crocheted fabrics, impregnated, coated, covered or laminated, and sterile surgical or dental adhesion barriers of subheading 3006 10 30) 6003 90 Knitted or crocheted fabrics of a width of <= 30 cm (excluding of cotton, man-made fibres, wool or fine animal hair, those containing by weight >= 5% of elastomeric yarn or rubber thread, and pile fabrics, including “long pile”, looped pile fabrics, labels, badges and similar articles, knitted or crocheted fabrics, impregnated, coated, covered or laminated, and sterile surgical or dental adhesion barriers of subheading 3006 10 30) 6005 36 Unbleached or bleached warp knit fabrics of synthetic fibres ‘including those made on galloon knitting machines’, of a width of > 30 cm (excluding those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, including ‘long pile’, looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated) 6005 44 Printed warp knit fabrics of artificial fibres including those made on galloon knitting machines’, of a width of > 30 cm (excluding those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, including ‘long pile’, looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated) 56Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 6006 10 Fabrics, knitted or crocheted, of a width of > 30 cm, of wool or fine animal hair (excluding warp knit fabrics ‘including those made on galloon knitting machines’, those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, including ‘long pile’, looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated) 6309 Worn clothing and clothing accessories, blankets and travelling rugs, household linen and articles for interior furnishing, of all types of textile materials, including all types of footwear and headgear, showing signs of appreciable wear and presented in bulk or in bales, sacks or similar packings (excluding carpets, other floor coverings and tapestries) 6802 92 Calcareous stone, in any form (excluding marble, travertine and alabaster, tiles, cubes and similar articles of subheading 6802 10, imitation jewellery, clocks, lamps and lighting fittings and parts thereof, original sculptures and statuary, setts, curbstones and flagstones) 6804 23 Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of natural stone (excluding of agglomerated natural abrasives or ceramics, perfumed pumice stones, hand sharpening or polishing stones, and grinding wheels etc. specifically for dental drill engines) 6806 10 Slag-wool, rock-wool and similar mineral wools, including intermixtures thereof, in bulk, sheets or rolls 6806 20 Exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials, including intermixtures thereof 6806 90 Mixtures and articles of heat-insulating, sound-insulating or sound absorbing mineral materials (excluding slag-wool, rock-wool and similar mineral wools, exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials, articles of light concrete, asbestos-cement, cellulose fibre- cement or the like, mixtures and other articles of or based on asbestos, and ceramic products) 6807 10 Articles of asphalt or of similar materials, e.g.

petroleum bitumen or coal tar pitch, in rolls 57Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 6807 90 Articles of asphalt or of similar materials, e.g.

petroleum bitumen or coal tar pitch (excluding in rolls) 6809 19 Boards, sheets, panels, tiles and similar articles, of plaster or compositions based on plaster (excluding ornamented, faced or reinforced with paper or paperboard only, and with plaster agglomerated articles for heat-insulation, sound-insulation or sound absorption) 6810 91 Prefabricated structural components for building or civil engineering of cement, concrete or artificial stone, whether or not reinforced 6811 40 Articles of asbestos-cement, cellulose fibre- cement or the like, containing asbestos 6811 81 Corrugated sheets of cellulose fibre-cement or the like, not containing asbestos 6811 82 Sheets, panels, paving, tiles and similar articles, of cellulose fibre-cement or the like, not containing asbestos (excluding corrugated sheets) 6811 89 Articles of cellulose fibre-cement or the like, not containing asbestos (excluding corrugated and other sheets, panels, tiles and similar articles) ex 6813 20 Brake discs and pads for use on aircraft 6813 81 Brake linings and pads 6813 89 Friction material and articles thereof, e.g.

sheets, rolls, strips, segments, discs, washers and pads, for clutches and the like, with a basis of mineral substances or cellulose, whether or not combined with textile or other materials (excluding containing asbestos, and brake linings and pads) 6814 90 Worked mica and articles of mica (excluding electrical insulators, insulating fittings, resistors and capacitors, protective goggles of mica and their glasses, mica in the form of christmas tree decorations, and plates, sheets and strips of agglomerated or reconstituted mica, whether or not on supports) 6901 Bricks, blocks, tiles and other ceramic goods of siliceous fossil meals, e.g. kieselguhr, tripolite or diatomite, or of similar siliceous earths 58Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 6904 10 Building bricks (excluding those of siliceous fossil meals or similar siliceous earths, and refractory bricks of heading 6902) 6905 10 Roofing tiles 6905 90 Ceramic chimney pots, cowls, chimney liners, architectural ornaments and other ceramic constructional goods (excluding of siliceous fossil meals or similar siliceous earths, refractory ceramic constructional components, pipes and other components for drainage and similar purposes, and roofing tiles) 6906 Ceramic pipes, conduits, guttering and pipe fittings (excluding of siliceous fossil meals or similar siliceous earths, refractory ceramic goods, chimney liners, pipes specifically manufactured for laboratories, insulating tubing and fittings and other piping for electrotechnical purposes) 6907 22 Finishing ceramics (excluding refractory) 6907 40 Finishing ceramics (excluding refractory) 6909 90 Ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods (excluding general-purpose storage vessels for laboratories, containers for shops and household articles) 7002 10 Glass in balls, unworked (excluding glass microspheres <= 1 mm in diameter, glass balls of the nature of a toy) 7002 20 Rods of glass, unworked 7002 31 Tubes of fused quartz or other fused silica, unworked 7002 32 Tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°C to 300°C, unworked (excluding tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°C to 300°C) 7002 39 Tubes of glass, unworked (excluding tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°C to 300°C or of fused quartz or other fused silica) 59Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 7003 12 Cast glass and rolled glass, in non-wired sheets, coloured throughout the mass “body tinted”, opacified, flashed or having an absorbent, reflecting or non-reflecting layer, but not otherwise worked 7003 19 Cast glass and rolled glass, in non-wired sheets, not otherwise worked (excluding glass coloured throughout the mass “body tinted”, opacified, flashed or having an absorbent, reflecting or non-reflecting layer) 7003 20 Cast glass and rolled glass, in wired sheets, whether or not with absorbent, reflecting or non-reflecting layer, but not otherwise worked 7003 30 Profiles of glass, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked 7004 20 Sheets of glass, drawn or blown, coloured throughout the mass ‘body tinted’ opacified, flashed or having an absorbent, reflecting or non-reflecting layer, but not otherwise worked 7004 90 Sheets of glass, drawn or blown, but not otherwise worked (excluding glass coloured throughout the mass “body tinted” opacified, flashed or having an absorbent, reflecting or non-reflecting layer) 7005 10 Float glass and surface ground or polished glass, in sheets, having an absorbent, reflecting or non-reflecting layer, but not otherwise worked (excluding wired glass) 7005 21 Float glass and surface ground glass, in sheets, coloured throughout the mass “body tinted”, opacified, flashed or merely surface ground, but not otherwise worked (excluding wired glass or glass having an absorbent, reflecting or non- reflecting layer) 7005 29 Float glass and surface ground and polished glass, in sheets, but not otherwise worked (excluding wired glass or glass coloured throughout the mass “body tinted”, opacified, flashed or merely surface ground, or glass having an absorbent, reflecting or non- reflecting layer) 7005 30 Float glass and surface ground and polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, wired, but not otherwise worked 60Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 7007 11 Toughened “tempered” safety glass, of size and shape suitable for incorporation in motor vehicles, aircraft, spacecraft, vessels and other vehicles 7007 19 Glass; safety glass, toughened (tempered), (not of a size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels) 7007 21 Glass; safety glass, laminated, of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels 7007 29 Laminated safety glass (excluding glass of size and shape suitable for incorporation in motor vehicles, aircraft, spacecraft, vessels or other vehicles, multiple-walled insulating units) 7011 10 Glass envelopes, including bulbs and tubes, open, and glass parts thereof, without fittings, for electric lighting 7301 20 Angles, shapes and sections, of iron or steel, welded 7304 24 Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel 7307 22 Threaded elbows, bends and sleeves 7308 Structures and parts of structures “e.g. bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns”, of iron or steel; plates, rods, angles, shapes, sections, tub 7309 Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat- insulated, but not fitted with mechanical or thermal equipment 7310 Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material “other than compressed or liquefied gas”, of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s 7311 Containers of iron or steel, for compressed or liquefied gas (excluding containers specifically constructed or equipped for one or more types of transport) 61Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 7314 12 Endless bands of stainless steel wire, for machinery 7318 24 Cotters and cotter pins, of iron or steel 7320 20 Helical springs, of iron or steel (excluding flat spiral springs, clock and watch springs, springs for sticks and handles of umbrellas or parasols, and shock absorbers of section 17) 7322 90 Air heaters and hot-air distributors, including distributors which can also distribute fresh or conditioned air, non-electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel 7324 29 Baths of steel sheet 7407 10 Bars, rods and profiles, of refined copper 7407 21 Bars, rods and profiles, of copper-zinc base alloys “brass”, n.e.s.

7407 29 Bars, rods and profiles of copper alloys, n.e.s. (excluding such articles of copper-zinc base alloys “brass”) 7408 11 Wire of refined copper, with a maximum cross- sectional dimension of > 6 mm 7408 19 Wire of refined copper, with a maximum cross- sectional dimension of <= 6 mm 7408 21 Wire of copper-zinc base alloys “brass” 7408 22 Wire of copper-nickel alloys “cupro-nickel” or copper-nickel-zinc alloys “nickel silver” 7408 29 Wire of copper alloys (other than copper-zinc alloys (brass) copper-nickel alloys (cupro- nickel) or copper-nickel-zinc alloys (nickel silver)) 7409 21 Plates, sheets and strip, of copper-zinc base alloy “brass”, of a thickness of > 0.15 mm, in coils (excluding expanded sheet and strip and electrically insulated strip) 7409 29 Plates, sheets and strip, of copper-zinc base alloys “brass”, of a thickness of > 0.15 mm, not in coils (excluding expanded sheet and strip and electrically insulated strip) 7409 31 Plates, sheets and strip, of copper-tin base alloys “bronze”, of a thickness of > 0.15 mm, in coils (excluding expanded sheet and strip and electrically insulated strip) 62Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 7409 39 Plates, sheets and strip, of copper-tin base alloys “bronze”, of a thickness of > 0.15 mm, not in coils (excluding expanded sheet and strip and electrically insulated strip) 7409 90 Plates, sheets and strip, of copper alloys, of a thickness of > 0.15 mm (excluding copper- zinc base alloys “brass”, copper-tin base alloys “bronze”, copper-nickel base alloys “cupro- nickel”, copper-nickel-zinc base alloys “nickel silver”, and expanded sheet and strip and electrically insulated strip) 7415 21 Washers, ‘including spring washers and spring lock washers’, of copper 7505 11 Bars, rods, profiles and wire, of non-alloy nickel, n.e.s. (excluding electrically insulated products) 7505 12 Bars, rods, profiles and wire, of nickel alloys, n.e.s. (excluding electrically insulated products) 7505 21 Wire of non-alloy nickel (excluding electrically insulated products) 7505 22 Wire of nickel alloys (excluding electrically insulated products) 7506 10 Plates, sheets, strip and foil, of non-alloy nickel (excluding expanded plates, sheets or strip) 7506 20 Plates, sheets, strip and foil, of nickel alloys (excluding expanded plates, sheets or strip) 7507 11 Tubes and pipes of non-alloy nickel 7507 12 Tubes and pipes of nickel alloys 7507 20 Tube or pipe fittings, of nickel 7605 11 Wire of non-alloy aluminium, with a maximum cross-sectional dimension of > 7 mm (excluding stranded wire, cables, plaited bands and the like and other articles of heading 7614, and electrically insulated wires) 7605 19 Wire of non-alloy aluminium, with a maximum cross-sectional dimension of <= 7 mm (other than stranded wires, cables, ropes and other articles of heading 7614, electrically insulated wires, strings for musical instruments) 7605 21 Wire of aluminium alloys, with a maximum cross-sectional dimension of > 7 mm (excluding stranded wire, cables, plaited bands and the like and other articles of heading 7614, and electrically insulated wires) 63Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 7605 29 Wire, of aluminium alloys, having a maximum cross-sectional dimension of <= 7 mm (other than stranded wires, cables, ropes and other articles of heading 7614 , electrically insulated wires, strings for musical instruments) 7606 92 Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm (other than square or rectangular) 7607 20 Aluminium foil, backed, of a thickness (excluding any backing) of <= 0.2 mm (excluding stamping foils of heading 3212, and foil made up as Christmas tree decorating material) 7610 Structures and parts of structures “e.g. bridges and bridge-sections, towers, lattice masts, pillars and columns, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades”, of aluminium (excluding prefabricated buildings of heading 9406); plates, rod 7611 Reservoirs, tanks, vats and similar containers, of aluminium, for any material (other than compressed or liquefied gas), of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat- insulated (excluding containers specifically constructed or equipped for one or more types of transport) 7612 10 Collapsible tubular containers, of aluminium 7612 90 Casks, drums, cans, boxes and similar containers, including rigid tubular containers, of aluminium, for any material (other than compressed or liquefied gas), of a capacity of <= 300 l, n.e.s.

7804 11 Lead plates, sheets, strip and foil; lead powders and flakes - Plates, sheets, strip and foil - Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0.2 mm 7804 19 Lead plates, sheets, strip and foil; lead powders and flakes - Plates, sheets, strip and foil - Other 7804 20 Lead powders and flakes (excluding grains of lead, and spangles of heading 8308) 7905 Zinc plates, sheets, strip and foil 8001 10 Unwrought tin, not alloyed 8001 20 Unwrought tin alloys 64Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 8003 Tin bars, rods, profiles and wire 8007 Articles of tin 8101 10 Tungsten powders 8102 10 Molybdenum powders 8102 94 Unwrought molybdenum, including bars and rods obtained simply by sintering 8102 95 Molybdenum bars and rods (other than those obtained simply by sintering), profiles, plates, sheets, strip and foil, n.e.s.

8102 96 Molybdenum wire 8102 97 Molybdenum waste and scrap (excluding ash and residues containing molybdenum) 8102 99 Articles of molybdenum, n.e.s.

8105 90 Articles of cobalt 8109 21 Unwrought zirconium and zirconium powders, containing < 1 part hafnium to 500 parts zirconium by weight 8109 29 Unwrought zirconium and zirconium powders, containing => 1 part hafnium to 500 parts zirconium by weight 8109 31 Zirconium waste and scrap, containing less than 1 part hafnium to 500 parts zirconium by weight 8109 39 Zirconium waste and scrap - Other 8109 91 Articles of zirconium, containing less than 1 part hafnium to 500 part zirconium by weight 8109 99 Articles of zirconium - Other 8202 20 Bandsaw blades of base metal 8207 60 Tools for boring or broaching 8208 10 Knives and cutting blades, for machines or for mechanical appliances - for metalworking 8208 20 Knives and cutting blades, for machines or for mechanical appliances - for wood-working 8208 30 Knives and cutting blades, for machines or for mechanical appliances - used by the food industry 8208 40 Knives and cutting blades, for machines or for mechanical appliances - for agricultural, horticultural or forestry machines 65Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 8208 90 Knives and cutting blades, for machines or for mechanical appliances - other 8301 20 Locks used for motor vehicles, of base metal 8301 70 Keys presented separately 8302 30 Other mountings, fittings and similar articles suitable for motor vehicles 8309 10 Crown corks of base metal 8309 90 Stoppers, caps and lids, including screw caps and pouring stoppers, capsules for bottles, threaded bungs, bung covers, seals and other packing accessories of base metal (excluding crow corks) 8402 12 Watertube boilers with a steam production not exceeding 45 tonnes per hour 8402 19 Other vapour generating boilers, including hybrid boilers 8402 20 Superheated water boilers 8402 90 Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam);

superheated water boilers - Parts 8405 90 Parts of producer gas or water gas generators and acetylene gas generators or similar water process gas generators, n.e.s.

8406 90 Steam turbines and other vapour turbines – Parts 8408 Compression-ignition internal combustion piston engine “diesel or semi-diesel engine” 8412 10 Reaction engines other than turbojets 8412 21 Engines and motors - linear acting (cylinders) 8412 29 Hydraulic power engines and motors - Other 8412 39 Pneumatic power engines and motors - Other 8413 11 Pumps fitted or designed to be fitted with a measuring device, for dispensing fuel or lubricants, of the type used in filling stations or in garages 8413 19 Pumps for liquids, fitted or designed to be fitted with a measuring device (excluding pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages) 8413 30 Fuel, lubricating or cooling medium pumps for internal combustion piston engine 66Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 8413 50 Reciprocating positive displacement pumps for liquids, power-driven (excluding those of subheading 8413 11 and 8413 19, fuel, lubricating or cooling medium pumps for internal combustion piston engine and concrete pumps) 8413 60 Rotary positive displacement pumps for liquids, power-driven (excluding those of subheading 8413 11 and 8413 19, fuel, lubricating or cooling medium pumps for internal combustion piston engine) 8413 81 Pumps for liquids, power-driven (excluding those of subheading 8413 11 and 8413 19, fuel, lubricating or cooling medium pumps for internal combustion piston engine, concrete pumps, general reciprocating or rotary positive displacement pumps and centrifugal pumps of all kinds) 8414 10 Vacuum pumps 8415 83 Other air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated - not incorporating a refrigerating unit 8416 10 Furnace burners for liquid fuel 8416 20 Furnace burners for pulverised solid fuel or gas, including combination burners 8416 30 Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances (excluding burners) 8416 90 Parts of furnace burners such as mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances 8418 61 Heat pumps (excluding air conditioning machines of heading 8415) 8419 19 Instantaneous or storage water heaters, non- electric (excluding instantaneous gas water heaters and boilers or water heaters for central heating) 8419 40 Distilling or rectifying plant 8419 50 Heat-exchange units (excluding those used with boilers) 67Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 8419 89 Machinery, plant or laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, sterilising, pasteurising, steaming, evaporating, vaporising, condensing or cooling, n.e.s. (excluding machinery used for domestic purposes and furnaces, ovens and other equipment of heading 8514) 8419 90 Parts of machinery, plant and laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, and of non-electric instantaneous and storage water heaters, n.e.s.

8420 99 Parts of calendering or other rolling machines, other than for metals or glass, and cylinders therefor - Other 8424 89 Other appliances - Other 8424 90 Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sandblasting machines and similar jet projecting machines - Parts 8425 11 Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles powered by electric motor 8426 12 Mobile lifting frames on tyres and straddle carriers 8426 99 Ships’ derricks; cranes, including cable cranes;

mobile lifting frames, straddle carriers and works trucks fitted with a crane - Other 8427 20 11 Rough terrain fork-lift and other stacking trucks, self-propelled, with a lifting height >= 1 m 8427 20 19 Works trucks, self-propelled, with a lifting height >= 1 m, non- powered with an electric motor (excluding rough terrain fork-lift trucks and other stacking trucks) 8427 20 90 Works trucks, self-propelled, with a lifting height < 1 m, non-powered with an electric motor 8429 19 Bulldozers and angledozers - Other 68Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 8429 59 Mechanical shovels, excavators and shovel loaders – Other 8430 50 Self-propelled earth-moving machinery, n.e.s.

8430 69 Earth moving machinery, not self-propelled, n.e.s.

8439 10 Machinery for making pulp of fibrous cellulosic material 8439 30 Machinery for finishing paper or paperboard 8440 90 Bookbinding machinery, including book- sewing machines - Parts 8441 30 Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by moulding 8442 30 Machinery, apparatus and equipment for preparing or making printing plates, cylinders or other printing components (excluding machines of headings 8456 to 8465) 8442 40 Parts of the foregoing machinery, apparatus or equipment 8443 11 Offset printing machinery, reel fed 8443 13 Other offset printing machinery 8443 15 Letterpress printing machinery, other than reel fed, excluding flexographic printing 8443 16 Flexographic printing machinery 8443 17 Gravure printing machinery 8443 91 Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 8444 Machines for extruding, drawing, texturing or cutting man-made textile materials 8448 11 Dobbies and jacquards; card-reducing, copying, punching or assembling machines for use therewith 8448 19 Auxiliary machinery for machines of heading 8444, 8445, 8446 or 8447 - Other 8448 33 Spindles, spindle flyers, spinning rings and ring travellers 8448 42 Reeds for looms, healds and heald-frames 8448 49 Parts and accessories of weaving machines

(looms) or of their auxiliary machinery - Other 69Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 8448 51 Sinkers, needles and other articles used in forming stitches 8451 10 Dry-cleaning machines 8451 29 Drying machines - Other 8451 30 Ironing machines and presses (including fusing presses) 8451 90 Machinery (other than machines of heading

8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made- up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics - Parts 8453 10 Machinery for preparing, tanning or working hides, skins or leather 8453 80 Other machinery 8453 90 Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines – Parts 8454 10 Converters 8458 Lathes (including turning centres) for removing metal 8459 10 Way-type unit head machines 8459 61 Milling machines for metals, numerically controlled (excluding way-type unit head machines, boring-milling machines, knee-type milling machines and gear cutting machines) 8459 69 Milling machines for metals, not numerically controlled (excluding way-type unit head machines, boring-milling machines, knee-type milling machines and gear cutting machines) 8459 70 Other threading or tapping machines 8461 20 Shaping or slotting machines, for working metals, metal carbides or cermets 8461 30 Broaching machines, for working metals, metal carbides or cermets 8461 40 Gear-cutting, gear-grinding or gear-finishing machines 70Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 8461 50 11 Circular saws for working metals, metal carbides or cermets (excluding machines for working in the hand) 8461 50 19 Sawing machines for working metals, metal carbides or cermets (excluding machines for working in the hand and circular saws) 8461 50 90 Cutting-off machines for working metals, metal carbides or cermets (excluding machines for working in the hand and sawing machines) 8461 90 Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included - Other 8463 Machine tools for working metal, sintered metal carbides or cermets, without removing material (excluding forging, bending, folding, straightening and flattening presses, shearing machines, punching or notching machines, presses and machines for working in the hand) 8464 Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold-working glass (excluding machines for working in the hand) 8466 10 Tool holders and self-opening dieheads 8466 20 Work holders for machine tools 8466 30 Dividing heads and other special attachments for machine tools, n.e.s.

8466 91 Other parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines;

tool holders for any type of tool for working in the hand - For machines of heading 8464 8466 92 Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand - For machines of headings 8456 to 8461 8466 93 Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, 71Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand; For machines of headings 8456 to 8461 8471 50 Processing units other than those of subheading 8471 41 or 8471 49, whether or not containing in the same housing one or two of the following

types of unit: storage units, input units, output units 8471 80 Units for automatic data-processing machines (excluding processing units, input or output units and storage units) 8474 10 Sorting, screening, separating or washing machines 8474 39 Mixing or kneading machines - Other 8474 80 Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form;

machines for forming foundry moulds of sand - Other machinery 8475 21 Machines for making optical fibres and preforms thereof 8475 29 Machines for manufacturing or hot working glass or glassware - Other 8475 90 Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware - Parts 8477 30 Blow-moulding machines for working rubber or plastics 8479 10 Machinery for public works, building or the like 8479 30 Presses for the manufacture of particle board or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork 8479 50 Industrial robots, not elsewhere specified or included 8479 82 Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying 72Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) or stirring machines, n.e.s. (excluding industrial robots) 8479 89 Machines and mechanical appliances, n.e.s.

8479 90 Machines and mechanical appliances having individual functions, not specified or included elsewhere in Chapter 84 - Parts 8480 20 Mould bases 8480 30 Moulding patterns 8480 60 Moulds for mineral materials 8481 10 Pressure-reducing valves 8481 20 Valves for oleohydraulic or pneumatic transmissions 8481 30 Check “non-return” valves for pipes, boiler shells, tanks, vats or the like 8481 40 Safety or relief valves 8482 10 Ball bearings 8482 20 Tapered roller bearings, including cone and tapered roller assemblies 8482 40 Needle roller bearings 8482 91 Balls, needles and rollers 8483 Transmission shafts, including camshafts and crankshafts, and cranks; bearing housings and plain shaft bearings for machines; gears and gearing; ball or roller screws, gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks, clutches and shaft couplings 8484 20 Mechanical seals 8486 Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note 11(c) to Chapter 84; parts and accessories, n.e.s.

8502 13 20 Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output > 375 kVA but <= 750 kVA 8502 13 40 Generating sets with compression-ignition internal combustion piston engine “diesel or 73Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) semi-diesel engine” of an output > 750kVA but <= 2,000 kVA 8502 13 80 Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output > 2,000 kVA 8502 20 Generating sets with spark-ignition internal combustion piston engine 8502 31 Generating sets, wind-powered 8502 39 Other generating sets - Other 8502 40 Electric rotary converters 8504 33 Transformers having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA 8504 34 Transformers having a power handling capacity exceeding 500 kVA 8505 19 Permanent magnets and articles intended to become permanent magnets after magnetization, of materials other than metal 8505 20 Electromagnetic couplings, clutches and brakes 8505 90 Electromagnets and electromagnetic lifting heads, and their parts (excluding magnets for medical use); electromagnetic or permanent magnet chucks, clamps and similar holding devices and their parts, n.e.s.

8507 30 Electric accumulators, including separators therefor, whether or not rectangular (including square) - Nickel-cadmium 8511 Electrical ignition or starting equipment of a kind used for spark-ignition or compression- ignition internal combustion engines e.g.

ignition magnetos, ignition coils, sparking plugs, glow plugs and starter motors; generators e.g. dynamos and alternators and cut-outs of a kind used in conjunction with such engines; parts thereof 8514 20 Furnaces and ovens functioning by induction or dielectric loss 8514 31 Electron beam furnaces 8514 40 Equipment for the heat treatment of materials by induction or dielectric loss (excluding ovens and furnaces) 8516 21 Electric storage heating radiators, for space- heating 74Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 8516 80 Electric heating resistors (excluding those of agglomerated coal and graphite) 8523 51 Solid-state, non-volatile data storage devices for recording data from an external source (excluding goods of Chapter 37) 8525 50 Transmission apparatus 8525 60 Transmission apparatus for radio-broadcasting or television, incorporating reception apparatus 8525 81 High-speed television cameras, digital cameras and video camera recorders as specified in subheading note 1 to Chapter 85 8525 82 Radiation-hardened or radiation-tolerant television cameras, digital cameras and video camera recorders as specified in subheading note 2 to Chapter 85 8525 83 Night vision television cameras, digital cameras and video camera recorders as specified in subheading note 3 to Chapter 85 8526 10 Radar apparatus 8526 91 Radio navigational aid apparatus 8526 92 Radio remote control apparatus 8529 90 Other parts suitable for use solely or principally with the apparatus of headings 8524 to 8528 8530 90 Electrical signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields (other than those of heading 8608) - Parts 8533 29 Other fixed resistors - Other 8535 21 Automatic circuit breakers for a voltage > 1,000 V but < 72.5 kV 8535 29 Automatic circuit breakers for a voltage >=

72.5 kV 8535 30 Isolating switches and make-and-break switches 8535 40 Lightning arresters, voltage limiters and surge suppressors, for a voltage > 1,000 V 8535 90 Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, fuses, lightning arresters, voltage limiters, surge suppressors, plugs and other connectors, 75Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) junction boxes), for a voltage exceeding 1,000 V - Other 8539 41 Arc lamps 8539 51 Light-emitting diode (LED) modules 8539 52 Light-emitting diode (LED) lamps 8540 20 Television camera tubes; image converters and intensifiers; other photocathode tubes 8540 60 Other cathode ray tubes 8540 71 Magnetrons 8540 79 Microwave tubes (for example, magnetrons, klystrons, travelling-wave tubes, carcinotrons), excluding grid-controlled tubes - Other 8540 81 Receiver or amplifier valves and tubes 8540 89 Other valves and tubes - Other 8540 91 Parts of cathode ray tubes 8547 90 Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material - Other 8548 Electrical parts of machinery or apparatus, not specified or included elsewhere in Chapter 85 8549 Electrical and electronic waste and scrap 8601 10 Rail locomotives powered from an external source of electricity 8602 90 Rail locomotives powered by electric accumulators 8604 Railway or tramway maintenance or service vehicles, whether or not self-propelled (for example, workshops, cranes, ballast tampers, trackliners, testing coaches and track inspection vehicles) 8606 92 Other railway or tramway goods vans and wagons, not self-propelled - Open, with non- removable sides of a height exceeding 60 cm 8703 10 Vehicles for the transport of <10 persons on snow; golf cars and similar vehicles 76Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 8703 23 Motor cars and other motor vehicles principally designed for the transport of <10 persons, including station wagons and racing cars, with only spark-ignition internal combustion reciprocating piston engine of a cylinder capacity >1,500 cm³ but <= 3,000 cm³ 8703 24 Motor cars and other motor vehicles principally designed for the transport of <10 persons, including station wagons and racing cars, with only spark-ignition internal combustion reciprocating piston engine of a cylinder capacity > 3,000 cm³ 8703 32 Motor cars and other motor vehicles principally designed for the transport of <10 persons, including station wagons and racing cars, with only diesel engine of a cylinder capacity > 1,500 cm³ but <= 2,500 cm³ 8703 33 Motor cars and other motor vehicles principally designed for the transport of <10 persons, including station wagons and racing cars, with only diesel engine of a cylinder capacity > 2,500 cm³ 8703 40 Motor cars and other motor vehicles principally designed for the transport of <10 persons, including station wagons and racing cars, with both spark-ignition internal combustion reciprocating piston engine and electric motor as motors for propulsion (excluding plug-in hybrids) 8703 50 Motor cars and other motor vehicles principally designed for the transport of <10 persons, including station wagons and racing cars, with both diesel engine and electric motor as motors for propulsion (excluding plug-in hybrids) 8703 60 Motor cars and other motor vehicles principally designed for the transport of <10 persons, including station wagons and racing cars, with both spark-ignition internal combustion reciprocating piston engine and electric motor as motors for propulsion, capable of being charged by plugging to external source of electric power 8703 70 Motor cars and other motor vehicles principally designed for the transport of <10 persons, including station wagons and racing cars, with both diesel engine and electric motor as motors for propulsion, capable of being charged by plugging to external source of electric power 77Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 8703 80 Motor cars and other motor vehicles principally designed for the transport of <10 persons, including station wagons and racing cars, with only electric motor for propulsion 8703 90 Motor cars and other vehicles principally designed for the transport of <10 persons, including station wagons and racing cars, with engines other than internal combustion piston engine or electric motor 8704 Motor vehicles for the transport of goods, including chassis with engine and cab, excluding vehicles of subheadings 8704 21 91 and 8704 21 99 with engines of a cylinder capacity not exceeding 1,900 cm³ 8705 10 Crane lorries (excluding breakdown lorries) 8705 40 Concrete-mixer lorries 8705 90 Special purpose motor vehicles, other than those principally designed for the transport of persons or goods (for example, breakdown lorries, crane lorries, fire fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile workshops, mobile radiological units) - Other 8903 Yachts and other vessels for pleasure or sports;

rowing boats and canoes 9005 Binoculars, monoculars, other optical telescopes, and mountings therefor; other astronomical instruments and mountings therefor (excluding instruments for radioastronomy and other instruments or apparatus specified elsewhere) 9007 10 Cinematographic cameras 9007 20 Cinematographic projectors 9007 91 Parts and accessories for cinematographic cameras, n.e.s.

9007 92 Parts and accessories for cinematographic projectors, n.e.s.

9010 10 Apparatus and equipment for automatically developing photographic (including cinematographic) film or paper in rolls or for automatically exposing developed film to rolls of photographic paper 9014 Direction finding compasses; other navigational instruments and appliances (excluding radio navigational equipment); parts thereof 78Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 9015 10 Range Finders 9015 30 Levels 9015 40 Photogrammetrical surveying instruments and appliances 9015 80 Other instruments and appliances 9015 90 Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders - Parts and accessories 9025 90 Parts and accessories for hydrometers, areometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psychrometers, n.e.s.

9027 10 Gas or smoke analysis apparatus 9027 50 Mass spectrometers using optical radiation (uv, visible, ir) 9027 81 Mass spectrometers 9029 10 Revolution counters, production counters, taximeters, milometers, pedometers and the like 9401 10 Seats for aircraft 9401 20 Seats for motor vehicles 9403 30 Wooden furniture of a kind used in offices 9406 10 Prefabricated buildings of wood 9406 20 Modular building units, of steel 9406 90 Prefabricated buildings, whether or not complete or already assembled - Other 9503 00 75 Plastic toys and models, incorporating a motor, n.e.s under heading 9503 9503 00 79 Toys and models, not made of plastic incorporating a motor, n.e.s under heading 9503 9504 50 Video game consoles and machines other than those of subheading 9504 30 9606 10 Press-fasteners, snap-fasteners and press studs and parts therefor 9606 21 Buttons of plastics, not covered with textile material (excluding press-fasteners, snap- fasteners, press studs and cuff links) 9606 22 Buttons of base metal, not covered with textile material (excluding press-fasteners, snap- fasteners, press studs and cuff links) 79Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Name of the good (2) 9606 29 Buttons (excluding of plastics or base metal, not covered with textile material, press- fasteners, snap-fasteners, press studs and cuff links) 9606 30 Button moulds and other parts of buttons;

button blanks 9608 91 Pen nibs and nib points” Schedule 2 Regulation 16(16) New Part 5 of Schedule 3E “Part 5 Additional goods with industrial uses

5. Any thing (other than a thing falling within commodity code 98 that is a plant or component plant for the production of food and drinks, pharmaceuticals, medicines and medical devices) falling within a commodity code mentioned in column 1 of the following table.

Commodity code (1) Description (2) 2518 10 Crude dolomite, not calcined or not sintered 2520 20 Plasters consisting of calcined gypsum or calcium sulphate, whether or not coloured, with or without small quantities of accelerators or retarders 2602 Manganese ores and concentrates, including ferruginous manganese ores and concentrates with a manganese content of 20 % or more, calculated on the dry weight 2615 Niobium, tantalum, vanadium or zirconium ores and concentrates 2811 Other inorganic acids and other inorganic oxygen compounds of non-metals 2813 Sulphides of non-metals; commercial phosphorus trisulphide 2814 Ammonia, anhydrous or in aqueous solution 2815 Sodium hydroxide (caustic soda), potassium hydroxide (caustic potash); peroxides of sodium or potassium 2825 Hydrazine and hydroxylamine and their inorganic salts; inorganic bases, metal oxides, hydroxides and peroxides, n.e.s.

80Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Commodity code (1) Description (2) 2827 Chlorides, chloride oxides and chloride hydroxides; bromides and bromide oxides; iodides and iodide oxides 2829 Chlorates and perchlorates; bromates and perbromates; iodates and periodates 2833 Sulphates; alums; peroxosulphates

(persulphates) 2834 21 Nitrate of potassium 2834 29 Nitrates (excluding of potassium and of mercury) 2836 Carbonates; peroxocarbonates (percarbonates); commercial ammonium carbonate containing ammonium carbamate 2841 Salts of oxometallic or peroxometallic acids 2846 Compounds, inorganic or organic, of rare- earth metals, of yttrium or of scandium or of mixtures of these metals 2905 Acyclic alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives 2914 Ketones and quinones, whether or not with other oxygen function, and their halogenated, sulphonated, nitrated or nitrosated derivatives 2915 Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives 2917 Polycarboxylic acids, their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives 2920 Esters of inorganic acids of non-metals (excluding esters of hydrogen halides) and their salts; their halogenated, sulphonated, nitrated or nitrosated derivatives Ex 2924 Carboxyamide-function compounds; amide- function compounds of carbonic acid excluding any thing falling within commodity code 2924 2970 2925 Carboxyimide-function compounds (including saccharin and its salts) and imine-function compounds 2926 Nitrile-function compounds 2930 Organo-sulphur compounds 81Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Commodity code (1) Description (2) 3605 Matches other than pyrotechnic articles of heading 3604 3606 Ferro-cerium and other pyrophoric alloys in all forms; articles of combustible materials as specified in note 2 to Chapter 36 3812 Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidising preparations and other compound stabilisers for rubber or plastics 3903 Polymers of styrene, in primary forms 3904 Polymers of vinyl chloride or of other halogenated olefins, in primary forms 3909 Amino-resins, phenolic resins and polyurethanes, in primary forms 3911 Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in note 3 to

Chapter 39, not elsewhere specified or included, in primary forms 3912 Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms 3917 Tubes, pipes and hoses, and fittings therefor (for example joints, elbows, flanges), of plastics 3920 Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials 3921 Other plates, sheets, film, foil and strip, of plastics 3925 Builders’ ware of plastics, not elsewhere specified or included 4011 80 New pneumatic tyres, of rubber, of a kind used on construction, mining or industrial handling vehicles and machines 4811 41 Self-adhesive paper and paperboard, surface- coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size 4811 49 Gummed or adhesive paper and paperboard, surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size.

82Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Commodity code (1) Description (2) 6814 10 Plates, sheets and strips of agglomerated or reconstituted mica, whether or not on a support of paper, paperboard or other materials 6909 19 Ceramic wares for chemical or other technical uses (excluding of porcelain or china, articles having a hardness equivalent to >= 9 on the mohs scale, millstones, polishing stones, grindstones and the like of heading 6804, refractory ceramic goods, electrical devices, insulators and other electrical insulating fittings) 72 Iron and steel 7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel 7303 Tubes, pipes and hollow profiles, of cast iron 7304 31 Other, of circular cross-section, of iron or non- alloy steel cold-drawn or cold-rolled (cold- reduced) 7304 39 Other, of circular cross-section, of iron or non- alloy steel, other 7304 41 Other, of circular cross-section, of stainless steel cold-drawn or cold-rolled (cold-reduced) 7304 49 Other, of circular cross-section, of stainless steel, other 7304 51 Other, of circular cross-section, of other alloy steel cold-drawn or cold-rolled (cold-reduced) 7304 59 Other, of circular cross-section, of other alloy steel, Other 7304 90 Other, of circular cross-section, of other alloy steel, Other 7305 31 Casing of a kind used for drilling oil or gas, other, welded 7305 90 Casing of a kind used for drilling oil or gas, other 7306 30 Other, welded, of circular cross-section, of iron or non-alloy steel 7306 40 Other, welded, of circular cross-section, of stainless steel 7306 50 Threaded elbows, bends and sleeves 7306 61 Other, welded, of non-circular cross-section of square or rectangular cross-section 83Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Commodity code (1) Description (2) 7306 69 Other non-circular cross-section 7307 Tube or pipe fittings (for example couplings, elbows, sleeves), of iron or steel 7315 12 Articulated link chain of iron or steel (excluding roller chain) 7318 23 Rivets of iron or steel (excluding tubular and bifurcated rivets for particular uses) 7320 10 Leaf-springs and leaves therefor, of iron or steel 7409 11 Plates, sheets and strip of refined copper, not in coils, of a thickness of > [F1210.15] mm (excluding expanded sheet and strip and electrically insulated strip) 7409 19 Plates, sheets and strip of refined copper-zinc base alloy “brass” of a thickness of > 15 mm, in coils, (excluding expanded sheet and strip and electrically insulated strip) 7409 40 Plates, sheets and strip of copper alloys, in coils, of a thickness of > 15 mm (excluding copper-zinc base alloys “brass”, copper-zinc base alloys “bronze”, copper-nickel base alloys “cupro-nickel”, copper-nickel-zinc base alloys “nickel silver”, expanded sheet and strip and electrically insulated strip) 7410 21 Refined copper foil, backed, of a thickness “excluding any backing” of <= 0.15 mm (excluding stamping foils of heading 3212, metal yarns and metallised yarns and foil made up as Christmas tree decorating material) 7411 10 Copper tubes and pipes, of refined copper 7411 21 Copper tubes and pipes, of copper-zinc base alloys (brass) 7411 22 Copper tubes and pipes, of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) 7412 Copper tube or pipe fittings (for example couplings, elbows, sleeves) 7413 Stranded wire, cables, plaited bands and the like, of copper (not electrically insulated) 7606 11 Rectangular (including square) plates, sheets and strip, of not alloyed aluminium, of a thickness of > 0.2 mm 84Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Commodity code (1) Description (2) 7606 12 Rectangular (including square) plates, sheets and strip, of aluminium alloys, of a thickness of > 0.2 mm 7606 91 Plates, sheets and strip, of not alloyed aluminium, of a thickness of > 0.2 mm (other than square or rectangular) 7608 Aluminium tubes and pipes 7609 Aluminium tube or pipe fittings (for example couplings, elbows, sleeves) 7616 10 Lead plates, sheets, strip and foil; lead powders and flakes-Plates, sheets, strip and foil-Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0.2 mm 7907 Articles of zinc, n.e.s.

8111 Manganese and articles thereof, including waste and scrap (CAS 7439-96-5) 8112 21 Chromium unwrought; powders 8112 41 Unwrought rhenium and rhenium waste, scrap and powders (excluding ashes and residues) 8112 49 Articles of rhenium 8206 Sets of two or more tools of heading 8202 to 8205, put up in sets for retail sale 8212 10 Non-electric razors of base metal 8212 20 Safety razor blades of base metal, including razor blade blanks in strips 8302 49 Base metal mountings, fittings and similar articles (excluding locks with keys, clasps and frames with clasps incorporating locks, hinges, castors and mountings and fittings suitable for buildings, motor vehicles or furniture) 8404 Auxiliary plant for use with boilers of heading 8402 or 8403, e.g. economizers, superheaters, soot removers and gas recoverers; condensers for steam or other vapour power units; parts thereof Ex 8421 Centrifuges, including centrifugal dryers (excluding those for isotope separation);

filtering or purifying machinery and apparatus, for liquids or gases (excluding such machinery and apparatus for water and other beverages, and excluding artificial kidneys; parts thereof 85Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Commodity code (1) Description (2) 8428 Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics) 8485 20 Machines for additive manufacturing by plastics or rubber deposit 8485 30 Machines for additive manufacturing by plaster, cement, ceramics or glass deposit 8485 90 Parts for machines for additive manufacturing 8512 Electrical lighting or signalling equipment (excluding articles of heading 8539), windscreen wipers, defrosters and demisters, of a kind used for cycles or motor vehicles 8522 Parts and accessories suitable for use solely or principally with the apparatus of heading 8519 or 8521, discs, tapes, solid-state non-volatile storage devices, “smart cards” and other media for the recording of sound or of other phenomena, whether or not recorded, including matrices and masters for the production of discs, but excluding products of Chapter 37 8716 Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof 9027 20 Chromatographs and electrophoresis instruments 9612 Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges;

inkpads, whether or not inked, with or without boxes 98 Complete industrial plants and component parts” Schedule 3 Regulation 16(23) New table in renumbered Part 2 of Schedule 3I “Commodity code (1) Description (2) 4401 21 Coniferous wood in chips or particles (excluding those of a kind used principally for dying or tanning purposes) 4401 22 10 Wood in chips or particles, of eucalyptus 86Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 4401 22 90 Wood in chips or particles (excluding those of a kind used principally for dying or tanning purposes, coniferous wood and eucalyptus) 4403 11 Wood in the rough, treated with paint, stains, creosote or other preservatives, coniferous (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.) 4403 12 Wood in the rough, treated with paint, stains, creosote or other preservatives, non-coniferous (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.) 4403 21 10 Sawlogs of pine “Pinus spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared 4403 21 90 Pine “Pinus spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.;

wood treated with paint, stains, creosote or other preservatives) 4403 22 Pine “Pinus spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 23 10 Sawlogs of fir “Abies spp.” and spruce “Picea spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared 4403 23 90 Fir “Abies spp.” and spruce “Picea spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers;

wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 24 Fir “Abies spp.” and spruce “Picea spp.” in the rough, of which no cross-sectional dimension 87Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough- cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.;

wood treated with paint, stains, creosote or other preservatives) 4403 25 10 Sawlogs, coniferous, of which any cross- sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 25 90 Coniferous wood in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce;

sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 26 Coniferous wood in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce, and rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 41 Dark red meranti, light red meranti and meranti bakau wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like;

wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 49 10 Sapelli, acajou d’Afrique and iroko in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough- cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 49 35 Okoumé and sipo in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like;

88Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 49 85 Tropical wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding acajou d’Afrique, iroko, sapelli, okoumé and sipo; rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 91 Oak “Quercus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 93 Beech “Fagus spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding wood in the form of railway sleepers; wood cut into beams, etc.;

wood treated with paint, stains, creosote or other preservatives) 4403 94 Beech “Fagus spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 95 10 Sawlogs of birch “Betula spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared 4403 95 90 Birch “Betula spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.;

wood treated with paint, stains, creosote or other preservatives) 4403 96 Birch “Betula spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking 89Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 97 Poplar and aspen “Populus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers;

wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 98 Eucalyptus “Eucalyptus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers;

wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) 4403 99 Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives, coniferous and tropical wood, oak, beech, birch, poplar, aspen and eucalyptus) 4408 31 11 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, end-jointed, whether or not planed or sanded, of dark red meranti, light red meranti and meranti bakau 4408 31 21 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, of dark red meranti, light red meranti and meranti bakau (excluding end-jointed) 4408 31 25 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, sanded, of dark red 90Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) meranti, light red meranti and meranti bakau (excluding end-jointed) 4408 31 30 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, whether or not spliced, of dark red meranti, light red meranti and meranti bakau (excluding planed, sanded or end-jointed) 4408 39 15 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, sanded, or end-jointed, whether or not planed, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose 4408 39 21 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose (excluding end-jointed) 4408 39 30 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 6 mm, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose (excluding planed, sanded or end-jointed) 4408 39 55 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, sanded or end-jointed, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose) 91Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 4408 39 70 Small boards for the manufacture of pencils, of a thickness of <= 6 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose) 4408 39 85 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 1 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para, palissandre de Rose, and planed, sanded or end- jointed) 4408 39 95 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of > 1 mm but <= 6 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para, palissandre de Rose, and planed, sanded or end- jointed) 4408 90 15 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, sanded or end-jointed (excluding tropical and coniferous wood) 4408 90 35 Small boards for the manufacture of pencils, of wood, of a thickness of <= 6 mm (excluding tropical and coniferous wood) 4408 90 85 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 1 mm (excluding planed, sanded or end-jointed, and tropical and coniferous wood) 4408 90 95 Sheets for veneering, including those obtained by slicing laminated wood, for plywood or 92Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of > 1 mm (excluding planed, sanded or end-jointed, and tropical and coniferous wood) 6804 22 12 Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of synthetic or artificial resin, not reinforced (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) 6804 22 18 Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of synthetic or artificial resin, reinforced (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) 6804 22 30 Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of ceramics or silicates (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) 6804 22 50 Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of other than of synthetic or artificial resin, ceramics or silicates (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) 6804 22 90 Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of agglomerated natural abrasives or ceramics (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) 93Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8205 10 Hand-operated drilling, threading or tapping hand tools 8205 20 Hammers and sledge hammers with working parts of base metal 8205 30 Planes, chisels, gouges and similar cutting tools for working wood 8205 40 Hand-operated screwdrivers 8205 51 Household hand tools, non-mechanical, with working parts of base metal, n.e.s.

8205 59 10 Hand tools for masons, moulders, cement workers, plasterers and painters, of base metal, n.e.s.

8205 59 80 Hand tools, including glaziers’ diamonds, of base metal, n.e.s.

8205 60 Blowlamps and the like (excluding gas- powered blowlamps) 8205 70 Vices, clamps and the like (excluding accessories for and parts of machine tools or water-jet cutting machines) 8205 90 10 Anvils; portable forges; hand- or pedal- operated grinding wheels with frameworks 8205 90 90 Sets of articles of two or more subheadings of heading 8205 8207 19 90 Rock-drilling or earth-boring tools, interchangeable, with working parts of materials other than sintered metal carbide, cermets, diamond or agglomerated diamond 8207 20 10 Interchangeable dies for drawing or extruding metal, with working parts of diamond or agglomerated diamond 8207 20 90 Interchangeable dies for drawing or extruding metal, with working parts of materials other than diamond or agglomerated diamond 8207 30 10 Interchangeable tools for pressing, stamping or punching, for working metal 8207 30 90 Interchangeable tools for pressing, stamping or punching, for working materials other than metal 8207 40 10 Tools for tapping metal, interchangeable 8207 40 30 Tools for threading metal, interchangeable 8207 40 90 Tools for tapping or threading materials other than metal, interchangeable 94Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8207 50 10 Tools for drilling, interchangeable, with working parts of diamond or agglomerated diamond (excluding tools for rock-drilling or earth-boring and tools for tapping) 8207 50 30 Interchangeable masonry drills, with working parts of materials other than diamond or agglomerated diamond 8207 50 50 Tools for drilling metal, interchangeable, with working parts of sintered metal carbide or cermets (excluding tools for tapping) 8207 50 60 Tools for drilling, interchangeable, for working metal, with working parts of high speed steel (excluding tools for tapping) 8207 50 70 Tools for drilling metal, interchangeable, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide, cermets or high speed steel (excluding tools for tapping) 8207 50 90 Tools for drilling, interchangeable, for working materials other than metal, with working parts of materials other than diamond or agglomerated diamond (excluding tools for rock-drilling or earth-boring, wall boring and tools for tapping) 8207 70 31 Interchangeable shank type tools for milling metal, with working parts of materials other than sintered metal carbide or cermets 8207 70 37 Tools for milling, interchangeable, for working metal, with working part of materials other than sintered metal carbide or cermets (excluding shank-type) 8207 90 30 Screwdriver bits of base metal 8207 90 50 Interchangeable gear-cutting tools (excluding milling tools for gear-cutting) 8207 90 71 Interchangeable tools for hand tools, whether or not power-operated, or for machine tools, for working metal, with working parts of sintered metal carbide or cermets, n.e.s.

8207 90 78 Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances or in machine tools, for working materials other than metal, with working part of sintered metal carbides or cermets, n.e.s.

8207 90 91 Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances, or 95Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) for machine tools, for working metal, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide or cermets, n.e.s.

8209 00 20 Inserts, indexable, for tools, unmounted, of sintered metal carbide or cermets 8209 00 80 Plates, sticks, tips and the like for tools, unmounted, of sintered metal carbides or cermets (excluding indexable inserts) 8402 11 Watertube boilers with a steam production > 45 t/hour 8405 10 Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers (excluding coke ovens, electrolytic process gas generators and carbide lamps) 8406 10 Steam and other vapour turbines for marine propulsion 8406 81 Steam and other vapour turbines, of an output > 40 MW (excluding those for marine propulsion) 8406 82 Steam and other vapour turbines, of an output <= 40 MW (excluding those for marine propulsion) 8410 11 Hydraulic turbines and water wheels, of a power <= 1,000 kW (excluding hydraulic power engines and motors of heading 8412) 8410 13 Hydraulic turbines and water wheels, of a power > 10,000 kW (excluding hydraulic power engines and motors of heading 8412) 8410 90 Parts of hydraulic turbines and water wheels including regulators 8412 31 Pneumatic power engines and motors, linear- acting, “cylinders” 8412 80 10 Steam or other vapour power engines (excluding steam or other vapour generating boilers and turbines) 8412 80 80 Engines and motors, non-electrical (excluding steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines, reaction engines, hydraulic power engines and motors, pneumatic power engines and motors, steam or other vapour power engines and electric motors) 96Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8412 90 20 Parts of reaction engines, n.e.s. (excluding of turbojets) 8412 90 40 Parts of hydraulic power engines and motors, n.e.s.

8412 90 80 Parts of other engines and motors, n.e.s.

8415 20 Air conditioning machines of a kind used for persons, in motor vehicles 8415 81 Air conditioning machines incorporating a refrigerating unit and a valve for reversal of the cooling-heat cycle “reversible heat pumps” (excluding of a kind used for persons in motor vehicles and self-contained or “split- system” window or wall air conditioning machines) 8415 82 Air conditioning machines incorporating a refrigerating unit but without a valve for reversal of the cooling-heat cycle (excluding of a kind used for persons in motor vehicles, and self-contained or “split-system” window or wall air conditioning machines) 8415 90 Parts of air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, n.e.s.

8418 50 11 Refrigerated show-cases and counters, with a refrigerating unit or evaporator, for frozen food storage 8418 50 19 Refrigerated show-cases and counters, with a refrigerating unit or evaporator, for non-frozen food storage 8418 50 90 Refrigerating furniture with a refrigerating unit or evaporator (excluding combined refrigerator-freezers, with separate external doors, household refrigerators, refrigerated show-cases and counters) 8418 91 Furniture designed to receive refrigerating or freezing equipment 8418 99 10 Evaporators and condensers for refrigerating equipment (excluding for household refrigerators) 8418 99 90 Parts of refrigerating or freezing equipment and heat pumps, n.e.s.

8419 11 Instantaneous gas water heaters (excluding boilers or water heaters for central heating) 97Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8419 33 Dryers - lyophilisation apparatus, freeze drying units and spray dryers 8419 35 Other dryers, for wood, paper pulp, paper or paperboard 8419 39 Dryers n.e.s.

8420 10 10 Calendering or other rolling machines, of a kind used in the textile industry 8420 10 30 Calendering or other rolling machines, of a kind used in the paper industry 8420 10 81 Roll laminators of a kind used solely or principally for the manufacture of printed circuit substrates or printed circuits 8420 10 89 Calendering or other rolling machines (excluding of a kind used in the textile or paper industries or for metals or glass, and roll laminators of a kind used solely or principally for the manufacture of printed circuit substrates or printed circuits) 8420 91 10 Cylinders for calendering or other rolling machines, of cast iron (other than for metals or glass) 8420 91 80 Cylinders for calendering or other rolling machines (excluding of cast iron and those for metals or glass) 8422 90 90 Parts of packing or wrapping machinery and of other machinery of heading 8422, n.e.s.

(excluding parts of dishwashing machines) 8423 20 10 Scales for continuous weighing of goods on conveyors, using electronic means for gauging weight 8423 20 90 Scales for continuous weighing of goods on conveyors, using non-electronic means for gauging weight 8423 30 10 Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales, using electronic means for gauging weight 8423 30 90 Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales, using non-electronic means for gauging weight 8423 81 21 Check weighers and automatic control machines operating by reference to a pre- determined weight, having weighing capacity 98Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) <= 30 kg, using electronic means for gauging weight 8423 81 23 Machinery for weighing and labelling pre- packaged goods, having weighing capacity <= 30 kg, using electronic means for gauging weight 8423 81 25 Shop scales, having weighing capacity <= 30 kg, using electronic means for gauging weight (excluding machinery for weighing and labelling pre-packaged goods) 8423 81 29 Weighing machinery having a maximum weighing capacity <= 30 kg, using electronic means for gauging weight, n.e.s 8423 81 80 Weighing machinery having a maximum weighing capacity <= 30 kg, using non- electronic means for gauging weight, n.e.s 8423 82 20 Weighing machinery of a maximum weighing capacity > 30 kg but <= 5,000 kg, using electronic means for gauging weight (excluding machines for weighing motor vehicles, personal weighing machines, scales for continuous weighing of goods on conveyors, constant weight scales and scales for discharging a pre- determined weight of material into a bag or container, also hopper scales) 8423 82 81 Check weighers and automatic control machines operating by reference to a pre- determined weight, of a maximum weighing capacity > 30 kg but <= 5,000 kg, using non- electronic means for gauging weight 8423 82 89 Weighing machinery of a maximum weighing capacity > 30 kg but <= 5,000 kg, n.e.s.

8423 89 20 Weighing machinery of a maximum weighing capacity > 5,000 kg, using electronic means for gauging weight 8423 89 80 Weighing machinery of a maximum weighing capacity > 5,000 kg, using non-electronic means for gauging weight 8423 90 10 Parts of weighing machinery of subheadings 8423 20 10, 8423 30 10, 8423 81 21, 8423 81 23, 8423 81 25, 8423 81 29, 8423 82 20 or 8423 89 20 n.e.s.

8423 90 90 Weighing machine weights of all kinds; parts of weighing machinery, n.e.s.

8424 20 Spray guns and similar appliances (other than electrical machines, appliances and 99Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) other devices for spraying molten metals or metal carbides of heading 8515, sand blasting machines and similar jet projecting machines) 8424 30 01 Water cleaning appliances with built-in motor, with heating device 8424 30 08 Water cleaning appliances with built-in motor, without heating device 8424 30 10 Steam or sand blasting machines and similar jet projecting machines, compressed air operated 8424 30 90 Steam or sand blasting machines and similar jet projecting machines (excluding compressed air operated and water cleaning appliances with built-in motor and appliances for cleaning special containers) 8425 19 Pulley tackle and hoists (other than skip hoists or hoists of a kind used for raising vehicles), non-powered by electric motor 8425 31 Winches and capstans powered by electric motor 8425 39 Winches and capstans, non-powered by electric motor 8425 41 Built-in jacking systems of a type used in garages 8425 42 Jacks and hoists, hydraulic (excluding built-in jacking systems used in garages) 8425 49 Jacks and hoists of a kind used for raising vehicles, not hydraulic 8426 11 Overhead travelling cranes on fixed support 8426 19 Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes and mobile lifting frames (excluding overhead travelling cranes on fixed support, mobile lifting frames on tyres, straddle carriers and portal or pedestal jib cranes) 8426 20 Tower cranes 8426 30 Portal or pedestal jib cranes 8426 41 Mobile cranes and works trucks fitted with a crane, self-propelled, on tyres (excluding wheel-mounted cranes, mobile lifting frames on tyres and straddle carriers) 8426 49 Mobile cranes and works trucks fitted with a crane, self-propelled (excluding those on tyres and straddle carriers) 100Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8426 91 10 Hydraulic cranes designed for the loading and unloading of the vehicle 8426 91 90 Cranes designed for mounting on road vehicles (excluding hydraulic cranes designed for the loading and unloading of vehicles) 8427 10 10 Self-propelled works trucks powered by an electric motor, with a lifting height >= 1 m 8427 10 90 Self-propelled works trucks powered by an electric motor, with a lifting height < 1 m 8427 90 Works trucks fitted with lifting or handling equipment, not self-propelled 8429 11 Self-propelled bulldozers and angledozers, track laying 8429 20 Self-propelled graders and levellers 8429 30 Self-propelled scrapers 8429 40 10 Self-propelled roadrollers, vibratory 8429 40 30 Self-propelled roadrollers (other than vibratory) 8429 40 90 Self-propelled tamping machines (excluding roadrollers) 8429 51 10 Self-propelled front-end shovel loaders specially designed for underground use 8429 51 91 Self-propelled front-end crawler shovel loaders (other than specially designed for underground use) 8429 51 99 Self-propelled front-end shovel loaders (other than specially designed for underground use or crawler shovel loaders) 8429 52 10 Self-propelled track-laying excavators, with a 360° revolving superstructure 8429 52 90 Self-propelling mechanical shovels with a 360° revolving superstructure (other than track- laying excavators) 8430 20 Snowploughs and snowblowers (excluding those mounted on railway wagons, motor vehicle chassis or lorries) 8430 61 Tamping or compacting machinery, not self- propelled (excluding hand-operated tools) 8433 11 10 Electric motor mowers for lawns, parks or sports grounds, with the cutting device rotating in a horizontal plane 8433 11 51 Self-propelled mowers for lawns, parks or sports grounds, powered non-electrically, with 101Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) the cutting device rotating in a horizontal plane, with a seat 8433 11 59 Self-propelled mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane, without a seat 8433 11 90 Mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane not self- propelled 8433 19 10 Electric motor mowers for lawns, parks or sports grounds, with the cutting device rotating in a vertical plane or with cutter bars 8433 19 51 Self-propelled motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, with a seat 8433 19 59 Self-propelled motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, without a seat 8433 19 70 Motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, not self-propelled 8433 19 90 Mowers for lawns, parks or sports grounds, without motor 8433 20 10 Motor mowers (excluding mowers for lawns, parks or sports grounds) 8433 20 90 Mowers (excluding mowers designed to be carried on or hauled by a tractor, mowers for lawns, parks or sports grounds, motor mowers and combine harvester-threshers) 8439 20 Machinery for making paper or paperboard 8439 91 Parts of machinery for making pulp of fibrous cellulosic material, n.e.s.

8439 99 Parts of machinery for making or finishing paper or paperboard, n.e.s.

8440 10 10 Folding machines for bookbinding 8440 10 20 Collating machines and gathering machines for bookbinding 8440 10 30 Sewing, wire stitching and stapling machines, including book-sewing machines, for bookbinding 102Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8440 10 40 Unsewn “perfect” binding machines 8440 10 90 Bookbinding machinery (excluding machinery of heading 8441, general-purpose presses, printing machinery of heading 8443 and machines of uses ancillary to printing, folding machines, collating machines, gathering machines, sewing, wire stitching and stapling machines and unsewn binding machines) 8441 10 10 Combined reel slitting and re-reeling machines, for making up paper pulp, paper or paperboard 8441 10 20 Slitting and cross cutting machines, for making up paper pulp, paper or paperboard (excluding combined reel slitting and re-reeling machines) 8441 10 30 Guillotines for paper or paperboard 8441 10 70 Cutting machines for paper or paperboard (other than bookbinding machinery of heading 8440, combined reel slitting and re-reeling machines, other slitting and cross-cutting machines and guillotines) 8441 20 Machines for making bags, sacks or envelopes out of paper pulp, paper or paperboard (excluding sewing machines and eyeletting machines) 8441 40 Machines for moulding articles in paper pulp, paper or paperboard (excluding drying equipment) 8441 80 Machinery for making up paper pulp, paper or paperboard, n.e.s.

8441 90 10 Parts of cutting machines for making up paper pulp, paper or paperboard, n.e.s.

8441 90 90 Parts of machinery for making up paper pulp, paper or paperboard, n.e.s.

8442 50 Printing plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes, e.g. planed, grained or polished 8443 14 Letterpress printing machinery, reel fed (excluding flexographic printing machinery) 8443 19 20 Printing machinery for printing textile materials (excluding offset, flexographic, letterpress and gravure printing machinery) 8443 19 40 Printing machinery for use in the production of semiconductors 103Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8443 19 70 Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 (excluding machinery for printing textile materials, those for use in the production of semiconductors, ink jet printing machines, hectograph or stencil duplicating machines, addressing machines and other office printing machines of heading 8469 to 8472 and offset, flexographic, letterpress and gravure printing machinery) 8443 99 10 Electronic assemblies of printers, copying machines and facsimile machines (excluding of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442) 8443 99 90 Parts and accessories of printers, copying machines and facsimile machines, n.e.s.

(excluding electronic assemblies and of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442) 8445 11 Carding machines for preparing textile fibres 8445 12 Combing machines for preparing textile fibres 8445 13 Drawing or roving machines 8445 19 Machines for preparing textile fibres (excluding carding, combing, drawing or roving machines) 8445 20 Textile spinning machines (excluding extruding and drawing or roving machines) 8445 30 Textile doubling or twisting machines 8445 40 Textile winding, including weft-winding, or reeling machines 8445 90 Machines for producing textile yarns and machines for preparing textile yarns for use on machines of heading 8446 or 8447 (excluding machines of heading 8444 and spinning, doubling or twisting machines) 8446 10 Weaving machines for weaving fabrics of a width <= 30 cm 8446 21 Power looms for weaving fabrics of a width > 30 cm, shuttle type 8446 29 Hand looms for weaving fabrics of a width > 30 cm, shuttle type 8446 30 Weaving machines for weaving fabrics of a width > 30 cm, shuttleless type 104Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8447 11 Circular knitting machines, with cylinder diameter <= 165 mm 8447 12 Circular knitting machines, with cylinder diameter > 165 mm 8447 20 20 Warp knitting machines, including Raschel type, and stitch-bonding machines 8447 20 80 Flat knitting machines (excluding warp knitting machines, including Raschel type) 8447 90 Machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting (excluding chain or blanket stitch machines) 8448 20 Parts and accessories of machines for extruding, drawing, texturing or cutting man- made textile materials or of their auxiliary machinery, n.e.s.

8448 31 Card clothing for machines for preparing textile fibres 8448 32 Parts and accessories of machines for preparing textile fibres, n.e.s. (other than card clothing) 8448 39 Parts and accessories of machines of heading 8445, n.e.s.

8448 59 Parts and accessories of machines of heading 8447, n.e.s.

8449 Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats; parts thereof (excluding machinery for preparing fibres for felt and calendars) 8451 40 Machines for washing, bleaching or dyeing textile yarns, fabrics or made-up textile articles (excluding household or laundry-type washing machines) 8451 50 Machines for reeling, unreeling, folding, cutting or pinking textile fabrics 8451 80 10 Machines used in the manufacture of linoleum or other floor coverings for applying the paste to the base fabric or other support (excluding calendars and general purpose presses) 8451 80 30 Machinery for dressing or finishing textile yarns, fabrics or other made-up textile articles (excluding machinery for dressing or finishing felt, and calendars and general purpose presses) 105Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8451 80 80 Machinery for coating or impregnating textile yarns, fabrics or other made-up textile articles (excluding calendars and general purpose presses) 8453 20 Machinery for making or repairing footwear of hides, skins or leather (excluding sewing machines) 8454 20 Ingot moulds and ladles, of a kind used in metallurgy or in metal foundries 8454 30 10 Machines for casting under pressure of a kind used in metallurgy or in metal foundries 8454 30 90 Casting machines of a kind used in metallurgy or in metal foundries (excluding machines for casting under pressure) 8454 90 Parts of converters, ladles, ingot moulds and casting machines of a kind used in metallurgy or in metal foundries, n.e.s.

8455 10 Mills for rolling metal tubes 8455 21 Hot or combination hot and cold metal-rolling mills (excluding tubes mills) 8455 22 Cold-rolling mills for metal (excluding tube mills) 8455 30 10 Rolls for metal-rolling mills, of cast iron 8455 30 31 Hot-rolling work-rolls; hot-rolling and cold- rolling back-up rolls, of open-die forged steel, for metal 8455 30 39 Cold-rolling work-rolls, for metal, of open-die forged steel 8455 30 90 Rolls for metal-rolling mills, of cast or wrought steel 8455 90 Parts of metal-rolling mills, n.e.s.

8457 10 10 Horizontal machining centres for working metal 8457 10 90 Machining centres for working metal (excluding horizontal machining centres) 8457 20 Unit construction machines “single station”, for working metal 8457 30 10 Multi-station transfer machines for working metal, numerically controlled 8457 30 90 Multi-station transfer machines for working metal, not numerically controlled 106Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8459 21 Drilling machines for working metal, numerically controlled (excluding way-type unit head machines) 8459 29 Drilling machines for working metal, not numerically controlled (excluding way- type unit head machines and hand-operated machines) 8459 31 Boring-milling machines for metals, numerically controlled (excluding way-type unit head machines) 8459 39 Boring-milling machines for metals, not numerically controlled (excluding way-type unit head machines) 8459 41 Boring machines for metals, numerically controlled (excluding way-type unit head machines and boring-milling machines) 8459 49 Boring machines for metals, not numerically controlled (excluding way-type unit head machines and boring-milling machines) 8459 51 Milling machines for metals, knee-type, numerically controlled 8459 59 Milling machines for metals, knee-type, not numerically controlled 8460 12 Flat-surface grinding machines for finishing metal, numerically controlled 8460 19 Flat-surface grinding machines for finishing metal, not numerically controlled 8460 22 Centreless grinding machines for finishing metal, numerically controlled (other than gear finishing machines) 8460 23 Cylindrical grinding machines for finishing metal, numerically controlled (excluding gear finishing machines and centreless machines) 8460 24 Grinding machines for finishing metal, numerically controlled (excluding flat-surface, cylindrical and gear grinding machines) 8460 29 10 Grinding machines for cylindrical metal surfaces, not numerically controlled (excluding gear finishing machines) 8460 29 90 Grinding machines for finishing metal, not numerically controlled (excluding flat-surface, cylindrical and gear grinding machines) 8460 31 Sharpening “tool or cutter grinding” machines, numerically controlled 107Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8460 39 Sharpening “tool or cutter grinding” machines, not numerically controlled 8460 40 10 Honing or lapping machines, for finishing metals, metal carbides or cermets, numerically controlled (other than gear finishing machines) 8460 40 90 Honing or lapping machines, for finishing metals, metal carbides or cermets, not numerically controlled (other than gear finishing machines) 8460 90 Machines for deburring, polishing or otherwise finishing metal or cermets (excluding grinding, sharpening, honing and lapping machines and machines for working in the hand) 8462 11 10 Closed die forging machines - Numerically controlled 8462 11 90 Closed die forging machines - Other 8462 19 10 Other hot forming machines for forging, die forging (including presses) and hot hammers - Numerically controlled 8462 19 90 Other hot forming machines for forging, die forging (including presses) and hot hammers - Other 8462 22 10 Profile forming machines - Numerically controlled 8462 22 90 Profile forming machines – Other 8462 23 Numerically controlled press brakes 8462 24 Numerically controlled panel benders 8462 25 Numerically controlled roll forming machines 8462 26 Other numerically controlled bending, folding, straightening or flattening machines 8462 29 Other bending, folding, straightening or flattening machines (including press brakes) for flat products 8462 32 10 Slitting lines and cut-to-length lines - Numerically controlled 8462 32 90 Slitting lines and cut-to-length lines - Other 8462 33 Shearing machines - Numerically controlled 8462 39 Other slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines 108Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8462 42 Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines - Numerically controlled 8462 49 Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines – Other 8462 51 Machines for working tube, pipe, hollow

section and bar (excluding presses) - Numerically controlled 8462 59 Machines for working tube, pipe, hollow

section and bar (excluding presses) - Other 8462 61 10 Hydraulic presses - Numerically controlled 8462 61 90 Hydraulic presses - Other 8462 62 10 Mechanical presses - Numerically controlled 8462 62 90 Mechanical presses - Other 8462 63 10 Servo-presses - Numerically controlled 8462 63 90 Servo-presses - Other 8462 69 10 Other cold metal working presses - Numerically controlled 8462 69 90 Other cold metal working presses - Other 8462 90 10 Other - Numerically Controlled 8462 90 90 Other - Other 8466 94 Parts and accessories for machine tools for working metal without removing material, n.e.s.

8468 10 Hand-held blow pipes, gas-operated, for soldering, brazing or welding 8468 20 Gas-operated machinery and apparatus for soldering, brazing, welding or surface tempering (excluding hand-held blow pipes) 8468 80 Machinery and apparatus for welding, not gas- operated (excluding electric machines and apparatus of heading 8515) 8468 90 Parts of machinery and apparatus for soldering, brazing, welding or surface tempering, non- electric, n.e.s.

8474 20 Crushing or grinding machines for solid mineral substances 109Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8474 31 Concrete or mortar mixers (excluding those mounted on railway wagons or lorry chassis) 8474 32 Machines for mixing mineral substances with bitumen 8474 90 10 Parts of machinery of heading 8474, of cast iron or cast steel 8474 90 90 Parts of machinery of heading 8474 (excluding of cast iron or cast steel) 8475 10 Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes 8476 21 Automatic beverage-vending machines incorporating heating or refrigerating devices 8476 29 Automatic beverage-vending machines, without heating or refrigerating devices 8476 81 Automatic goods-vending machines incorporating heating or refrigerating devices (excluding automatic beverage-vending machines) 8476 89 10 Money-changing machines 8476 89 90 Automatic goods-vending machines, without heating or refrigerating devices (excluding automatic beverage-vending machines and money-changing machines) 8476 90 10 Parts of money-changing machines, n.e.s.

8476 90 90 Parts of automatic goods-vending machines, n.e.s. (excluding of money-changing machines) 8478 10 Machinery for preparing or making up tobacco (excluding dryers and other heating equipment, centrifuges and filter presses) 8478 90 Parts of machinery for preparing or making up tobacco, n.e.s.

8479 40 Rope or cable-making machines (excluding twisting machines of the type used in spinning mills) 8479 71 Passenger boarding bridges, of a kind used in airports 8479 79 Passenger boarding bridges (excluding of a kind used in airports) 8479 81 Machinery for treating metal, including electric wire coil-winders, n.e.s. (excluding industrial robots, furnaces, dryers, spray guns and the like, high-pressure cleaning equipment and 110Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) other jet cleaners, rolling mills or machines, machine tools and rope or cable-making machines) 8480 10 Moulding boxes for metal foundry 8480 41 Injection or compression-type moulds for metal or metal carbides (excluding moulds of graphite or other carbons and ceramic or glass moulds) 8480 49 Moulds for metal or metal carbides (excluding moulds of graphite or other carbons, ceramic or glass moulds, linotype moulds or matrices, injection or compression-type moulds and ingot moulds) 8480 50 Moulds for glass (excluding moulds of graphite or other carbons and ceramic moulds) 8480 71 Injection or compression-type moulds for rubber or plastics 8480 79 Moulds for rubber or plastics (other than injection or compression types) 8482 30 Spherical roller bearings 8482 50 Other cylindrical roller bearings, including cage and roller assemblies 8482 80 Roller bearings, including combined ball-roller bearings (excluding ball bearings, tapered roller bearings, including cone and tapered roller assemblies, spherical roller bearings, needle and cylindrical roller bearings) 8487 10 10 Ships’ or boats’ propellers and blades therefor, of bronze 8487 10 90 Ships’ or boats’ propellers and blades therefor (excluding those of bronze) 8487 90 40 Parts of machinery of Chapter 84, not intended for a specific purpose, of cast iron, n.e.s.

8487 90 51 Parts of machinery of Chapter 84, not intended for a specific purpose, of cast steel, n.e.s.

8487 90 57 Parts of machinery of Chapter 84, not intended for a specific purpose, of open-die forged or closed-die forged iron or steel, n.e.s.

8487 9059 Parts of machinery of Chapter 84, not intended for a specific purpose, of iron or steel, n.e.s. (other than cast, open-die or closed-die forged) 8487 90 90 Machinery parts of Chapter 84, not intended for a specific purpose, n.e.s.

111Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8502 11 20 Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output <= 7.5 kVA 8502 11 80 Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output > 7.5 kVA but <= 75 kVA 8502 12 Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output > 75 kVA but <= 375 kVA 8502 20 20 Generating sets with spark-ignition internal combustion piston engine, of an output <= 7.5 kVA 8502 20 40 Generating sets with spark-ignition internal combustion piston engine, of an output > 7.5 kVA but <= 375 kVA 8502 20 60 Generating sets with spark-ignition internal combustion piston engine, of an output > 375 kVA but <= 750 kVA 8502 20 80 Generating sets with spark-ignition internal combustion piston engine, of an output > 750 kVA 8503 00 10 Non-magnetic retaining rings for electric motors and electric generating sets 8503 00 91 Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s., of cast iron or cast steel 8503 00 99 Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s.

(excluding non-magnetic retaining rings and of cast iron or cast steel) 8504 10 20 Inductors, whether or not connected with a capacitor 8504 10 80 Ballasts for discharge lamps or tubes (excluding inductors, whether or not connected with a capacitor) 8504 21 Liquid dielectric transformers, having a power handling capacity <= 650 kVA 8504 22 10 Liquid dielectric transformers, having a power handling capacity > 650 kVA but <= 1,600 kVA 112Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8504 22 90 Liquid dielectric transformers, having a power handling capacity > 1,600 kVA but <= 10,000 kVA 8504 23 Liquid dielectric transformers, having a power handling capacity > 10,000 kVA 8504 31 21 Measuring transformers for voltage measurement, having a power handling capacity <= 1 kVA 8504 31 29 Measuring transformers having a power handling capacity <= 1 kVA (other than for voltage measurement) 8504 31 80 Transformers having a power handling capacity <= 1 kVA (excluding liquid dielectric transformers) 8504 32 Transformers, having a power handling capacity > 1 kVA but <= 16 kVA (excluding liquid dielectric transformers) 8504 40 60 Accumulator chargers 8504 40 83 Rectifiers 8504 40 85 Inverters having a power handling capacity not exceeding 7.5 kVA 8504 40 86 Inverters having a power handling capacity exceeding 7.5 kVA 8504 40 95 Other static converters 8504 50 Inductors (excluding inductors for discharge lamps or tubes) 8504 90 11 Ferrite cores for transformers and inductors 8504 90 13 Steel laminations and cores, whether or not stacked or wound, for transformers and inductors 8504 90 17 Parts of transformers and inductors, n.e.s.

(excluding ferrite cores and steel laminations and cores) 8504 90 90 Parts of static converters, n.e.s.

8505 11 Permanent magnets and articles intended to become permanent magnets after magnetisation; of metal 8507 10 20 Lead-acid accumulators of a kind used for starting piston engines (starter batteries), working with liquid electrolyte (excluding spent) 113Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8507 10 80 Lead-acid accumulators of a kind used for starting piston engines (starter batteries), working with non-liquid electrolyte (excluding spent) 8507 2020 Lead-acid accumulators, working with liquid electrolyte (excluding spent and starter batteries) 8507 20 80 Lead-acid accumulators, working with non- liquid electrolyte (excluding spent and starter batteries) 8507 50 Nickel-metal hydride accumulators (excluding spent) 8507 60 Lithium-ion accumulators (excluding spent) 8507 80 Other electric accumulators (excluding spent and lead-acid, nickel-cadmium, nickel-metal hydride and lithium-ion accumulators) 8507 90 30 Separators for electric accumulators (excluding separators of vulcanised rubber other than hard rubber or of textiles) 8507 90 80 Parts of electric accumulators (excluding separators) 8514 11 Resistance heated furnaces and ovens - Hot isostatic presses 8514 19 80 Other resistance heated furnaces and ovens – Other 8514 31 10 Electron beam furnaces - Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies 8514 31 90 Electron beam furnaces – Other 8514 32 10 Plasma and vacuum arc furnaces - Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies 8514 32 90 Plasma and vacuum arc furnaces – Other 8514 39 10 Other furnaces and ovens, other - Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies 8514 39 90 Other furnaces and ovens, other – Other 8514 90 30 Other furnaces and ovens of subheadings 8514 31 10, 8514 32 10 and 8514 39 10 8514 90 70 Parts of electric industrial or laboratory furnaces and ovens, including of those functioning by induction or dielectric loss, and of industrial or laboratory equipment for the 114Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) heat treatment of materials by induction or dielectric loss, n.e.s.

8516 29 10 Liquid filled electric radiators, for space- heating and soil-heating 8516 32 Electro-thermic hairdressing apparatus (excluding hairdryers) 8516 33 Electric hand-drying apparatus 8516 40 Electric smoothing irons 852589 Other television cameras, digital cameras and video camera recorders 852910 Aerials and aerial reflectors of all kinds; parts suitable for use therewith 8529 90 18 Parts suitable for use solely or principally with the apparatus of headings 8524 to 8528, (excluding aerials, aerial fitters and separators, organic-light emitting modifiers and organic light-emitting diode panels) 8530 10 Electrical signalling, safety or traffic control equipment for railways or tramways (excluding mechanical or electromechanical equipment of heading 8608) 8530 80 Electrical signalling, safety or traffic control equipment (excluding that for railways or tramways and mechanical or electromechanical equipment of heading 8608) 8533 10 Fixed carbon resistors, composition or film types (excluding heating resistors) 8533 21 Fixed electrical resistors for a power handling capacity <= 20 W (excluding heating resistors) 8533 31 Wirewound variable electrical resistors, including rheostats and potentiometers, for a power handling capacity <= 20 W (excluding heating resistors) 8533 39 Wirewound variable electrical resistors, including rheostats and potentiometers, for a power handling capacity > 20 W (excluding heating resistors) 8533 40 10 Electrical variable resistors, including rheostats and potentiometers, for a power handling capacity <= 20 W (excluding wirewound variable resistors and heating resistors) 8533 40 90 Electrical variable resistors, including rheostats and potentiometers, for a power handling 115Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) capacity > 20 W (excluding wirewound variable resistors and heating resistors) 8533 90 Parts of electrical resistors, including rheostats and potentiometers, n.e.s.

8534 00 11 Multilayer printed circuits, consisting only of conductor elements and contacts 8534 00 19 Printed circuits consisting only of conductor elements and contacts (excluding multiple printed circuits) 8534 00 90 Printed circuits consisting of conductor elements, contacts and other passive elements (excluding those with passive and active elements) 8535 10 Fuses for a voltage > 1,000 V 8537 10 Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517, for a voltage not exceeding 1,000V 8539 10 Sealed beam lamp units 8539 21 30 Tungsten halogen filament lamps for motorcycles or other motor vehicles (excluding sealed beam lamp units) 8539 21 92 Tungsten halogen filament lamps for a voltage > 100 V 8539 21 98 Tungsten halogen filament lamps for a voltage <= 100 V (excluding those for motorcycles or other motor vehicles) 8539 22 10 Reflector filament lamps of a power <= 200 W and for a voltage > 100 V (excluding tungsten halogen filament lamps) 8539 22 90 Filament lamps of a power <= 200 W and for a voltage > 100 V (excluding tungsten halogen lamps, reflector lamps and ultraviolet or infra- red lamps) 8539 29 30 Filament lamps for motorcycles or other motor vehicles (excluding tungsten halogen lamps) 8539 29 92 Filament lamps for a voltage > 100 V (excluding tungsten halogen lamps, lamps of 116Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) a power <= 200 W, and ultraviolet or infra-red lamps) 8539 29 98 Filament lamps for a voltage <= 100 V (excluding tungsten halogen lamps and lamps for motorcycles and other motor vehicles) 8539 31 10 Discharge lamps, fluorescent, hot cathode, with double ended cap 8539 31 90 Discharge lamps, fluorescent, hot cathode (excluding with double ended cap) 8539 32 20 Mercury or sodium vapour lamps 8539 32 90 Metal halide lamps 8539 39 20 Cold-cathode fluorescent lamps “CCFLs” for backlighting of flat panel displays 8539 39 80 Discharge lamps (excluding hot-cathode fluorescent lamps, mercury or sodium vapour lamps, metal halide lamps, ultraviolet lamps, and cold-cathode fluorescent lamps “CCFLs” for backlighting of flat panel displays) 8539 49 Ultraviolet or infra-red lamps 8539 90 10 Lamp bases for filament or discharge lamps and other lamps of heading 8539, n.e.s.

8539 90 90 Parts of electric filament or discharge lamps, sealed beam lamp units, ultraviolet or infra-red lamps, arc lamps and LED lamps, n.e.s.

8540 11 Cathode ray television picture tubes, including video monitor cathode ray tubes, colour 8540 12 Cathode ray television picture tubes, including video monitor cathode ray tubes, black and white or other monochrome, with a screen width-to-height ratio of < 1.5 and a diagonal measurement of the screen > 72 cm 8540 40 Data/graphic display tubes, monochrome; data/ graphic display tubes, colour, with a phosphor dot screen pitch of < 0.4 mm (excluding photo cathode tubes and cathode ray tubes) 8541 10 Diodes, other than photosensitive or light- emitting diodes (LED) 8541 21 Transistors with a dissipation rate < 1 W (excluding photosensitive transistors) 8541 29 Other transistors, other than photosensitive transistors 8541 30 Thyristors, diacs and triacs (excluding photosensitive semiconductor devices) 117Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8541 41 Light-emitting diodes (LED) 8541 42 Photovoltaic cells not assembled in modules or made up into panels 8541 430 Photovoltaic cells assembled in modules or made up into panels 8541 49 Other photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels;

light-emitting diodes (LED) 8541 51 Semiconductor-based transducers 8541 59 Other semiconductor devices – other 8541 60 Mounted piezoelectric crystals 8541 90 Parts of diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, light emitting diodes and mounted piezoelectric crystals, n.e.s.

8542 31 Processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits 8542 32 Memories 8542 33 Amplifiers 8542 39 Other Electronic Integrated Circuits 8542 90 Parts of electronic integrated circuits, n.e.s.

8545 11 Electrodes of graphite or other carbon, for furnaces 8545 19 Electrodes of graphite or other carbon, for electrical purposes (excluding those used for furnaces) 8545 20 Carbon brushes for electrical purposes 8545 90 10 Heating resistors for electrical purposes, of graphite or other carbon 8545 90 90 Articles of graphite or other carbon, for electrical purposes (excluding electrodes, carbon brushes and heating resistors) 8548 Electrical parts of machinery or apparatus, not specified or included elsewhere in Chapter 85 8546 10 Electrical insulators of glass (excluding insulating fittings) 8546 20 Electrical insulators of ceramics (excluding insulating fittings) 118Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8546 90 10 Electrical insulators of plastics (excluding insulating fittings) 8546 90 90 Electrical insulators (excluding those of glass, ceramics or plastics and insulating fittings) 8547 10 Insulating fittings for electrical purposes, of ceramics 8547 20 Insulating fittings for electrical purposes, of plastics 8601 20 Rail locomotives powered by electric accumulators 8602 10 Diesel-electric locomotives 8606 10 Railway or tramway tank wagons and the like (excluding self-propelled) 8606 30 Railway or tramway self-discharging goods vans and wagons (excluding tank wagons and the like and insulated or refrigerated goods vans and wagons) 8606 91 10 Railway or tramway goods vans and wagons, covered and closed, specially designed for the transport of highly radioactive materials (excluding tank wagons and the like and insulated, refrigerated or self-discharging goods vans and wagons) 8606 91 80 Railway or tramway goods vans and wagons, covered and closed (excluding those specially designed for the transport of highly radioactive materials, tank wagons and the like and self- discharging goods vans and wagons) 8606 99 Railway or tramway goods vans and wagons (excluding those specially designed for the transport of highly radioactive materials, tank wagons and the like, insulated, refrigerated or self-discharging goods vans and wagons and open goods vans and wagons with non- removable sides of a height > 60 cm) 8608 Railway or tramway track fixtures and fittings (excluding sleepers of wood, concrete or steel, sections of track and other track fixtures not yet assembled and railway or tramway track construction material); mechanical, including electromechanical, signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing 119Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 8609 00 10 Containers with an anti-radiation lead covering, for the transport of radioactive materials 8609 00 90 Containers specially designed and equipped for carriage by one or more modes of transport (excluding those with an anti-radiation lead covering for the transport of radioactive materials) 8901 20 10 Sea-going tankers 8901 20 90 Tankers (excluding sea-going tankers) 8901 30 10 Sea-going refrigerated vessels (excluding tankers) 8901 30 90 Refrigerated vessels (excluding sea-going vessels and tankers) 8904 00 10 Tugs, sea-going and for inland waterways 8904 00 91 Sea-going pusher craft 8904 00 99 Pusher craft (excluding sea-going) 8905 10 10 Sea-going dredgers 8905 10 90 Dredgers (excluding sea-going) 8907 10 Inflatable rafts 8907 90 Rafts, tanks, coffer-dams, landing stages, buoys, beacons and other floating structures (excluding inflatable rafts, vessels of heading 8901 to 8906 and floating structures for breaking up) 8908 Vessels and other floating structures for breaking up 9001 10 10 Image conductor cables of optical fibres (excluding cables made up of individually sheathed fibres of heading 8544) 9001 10 90 Optical fibres, optical fibre bundles and cables (excluding made up of individually sheathed fibres of heading 8544 and image conductor cables) 9001 20 Sheets and plates of polarising material 9006 30 Cameras specially designed for underwater use, for aerial survey or for medical or surgical examination of internal organs; comparison cameras for forensic or criminological purposes 9008 50 Image projectors, and photographic enlargers and reducers (excluding cinematographic and parts) 120Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 9008 90 Parts and accessories for image projectors, photographic enlargers and reducers, n.e.s.

9010 50 Apparatus and equipment for photographic or cinematographic laboratories, n.e.s.; negatoscopes 9010 60 Projection screens 9010 90 20 Parts and accessories of apparatus and equipment of subheadings 9010 50 or 9010 60 , n.e.s.

9010 90 80 Parts and accessories for apparatus and equipment for automatically developing photographic or cinematographic film or paper in rolls or for automatically exposing developed film to rolls of photographic paper, n.e.s.

9015 20 Theodolites and tachymeters (tacheometers) 9016 00 10 Balances of a sensitivity of 50 mg or better, with or without weights 9016 00 90 Parts and accessories for balances of a sensitivity of 50 mg or better, n.e.s.

9017 10 10 Plotters as drafting machines 9017 10 90 Drafting tables and machines, whether or not automatic (excluding plotters) 9017 20 05 Plotters as drawing or marking-out instruments 9017 20 10 Drawing instruments (excluding drafting tables and machines, plotters) 9017 20 39 Marking-out instruments 9017 20 90 Mathematical calculating instruments, including slide rules, disc calculators and the like (excluding calculating machines) 9017 30 Micrometers, callipers and gauges (excluding gauges without adjustable devices of subheading 9031 80) 9017 80 10 Measuring rods and tapes and divided scales 9017 89 Hand-held instruments for measuring length, n.e.s.

9017 90 Parts and accessories for drawing, marking-out or mathematical calculating instruments and instruments for measuring length for use in the hand, n.e.s.

9024 10 20 Machines and appliances for universal testing of mechanical properties of metals or for tensile testing of metals 121Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 9024 10 40 Machines and appliances for testing the hardness of metals 9024 10 80 Machines and appliances for testing the mechanical properties of metals (excluding for universal, tensile or hardness testing) 9024 80 Machines and appliances for testing the mechanical properties of materials (excluding metals) 9024 90 Parts and accessories for machines and appliances for testing the mechanical properties of materials, n.e.s.

9025 19 Other thermometers and pyrometers, not combined with other instruments 9025 80 20 Barometers, not combined with other instruments 9025 80 80 Hydrometers, areometers and similar floating instruments, hygrometers and psychrometers, whether or not combined with each other or with thermometers or barometers, non- electronic 9026 10 21 Electronic flow meters for measuring or checking the flow or level of liquids (excluding meters and regulators) 9026 10 29 Electronic instruments and apparatus for measuring or checking the flow or level of liquids (excluding flow meters, meters and regulators) 9026 10 81 Flow meters for measuring or checking the flow or level of liquids, non-electronic (excluding meters and regulators) 9026 10 89 Instruments and apparatus for measuring or checking the flow or level of liquids, non- electronic (excluding flow meters, meters and regulators) 9026 20 20 Instruments and apparatus for measuring or checking pressure - electronic 9026 20 40 Instruments and apparatus for measuring or checking pressure - Spiral or metal diaphragm type pressure gauges 9026 20 80 Instruments and apparatus for measuring or checking pressure - other, n.e.s.

9026 80 20 Electronic instruments or apparatus for measuring or checking variables of liquids or gases, n.e.s.

122Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 9026 80 80 Non-electronic instruments or apparatus for measuring or checking variables of liquids or gases, n.e.s.

9026 90 Parts and accessories for instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases, n.e.s.

9027 89 10 Exposure meters 9027 89 30 pH meters, rH meters and other apparatus for measuring conductivity 9027 89 90 Instruments and apparatus for physical or chemical analysis or for determining surface tension or the like, or for measuring heat or sound, n.e.s.

9028 10 Gas meters, including calibrating meters therefor 9028 20 Liquid meters, including calibrating meters therefor 9028 30 11 Electricity supply or production meters for alternating current, single-phase, including calibrating meters therefor 9028 30 19 Electricity supply or production meters for alternating current, multi-phase, including calibrating meters therefor 9028 30 90 Electricity supply or production meters for continuous current, including calibrating meters therefor 9028 90 10 Parts and accessories for electricity meters, n.e.s.

9028 90 90 Parts and accessories for gas or liquid meters, n.e.s.

9029 20 31 Speed indicators for land vehicles 9029 20 38 Speed indicators and tachometers (excluding for land vehicles) 9029 2090 Stroboscopes 9029 90 Parts and accessories for revolution counters, production counters, taximeters, milometers, pedometers and the like, speed indicators and tachometers, and stroboscopes, n.e.s.

9031 90 Parts and accessories for instruments, appliances and machines for measuring and checking, n.e.s.

123Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format. “Commodity code (1) Description (2) 9033 00 10 Light-emitting diode “LED” backlight modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlight illumination for liquid crystal displays “LCDs” of apparatus of Chapter 90 9033 00 90 Parts and accessories for machines, appliances, instruments or other apparatus in Chapter 90, n.e.s.” Schedule 4 Regulation 16(24) New Part 3 of Schedule 3I “Part 3 Russia’s additional vulnerable goods

3. Any thing (other than a thing falling within commodity code 2921 2100, 2922 19, 2922 41, 2922 49, 2932 13, 2932 2020, 2934 2020, 2934 2080 or 2935 90 90 which is pre-packaged for medical use) falling within a commodity code mentioned in column 1 of the following table.

Commodity code (1) Description (2) 2529 21 Fluorspar (CAS 14542-23-5) 2710 12 25 Other light oils and preparations / for other purposes / special spirits 2809 20 Phosphoric acid and polyphosphoric acids 2832 30 Thiosulphates 2835 25 Calcium hydrogenorthophosphate (“dicalcium phosphate”) (CAS 7757-93-9) 2840 20 Other borates 2918 11 Lactic acid, its salts and esters 2918 14 Citric acid (CAS 77-92-9) 2918 99 40 2.6-dimethoxybenzoic acid; dicamba (iso);

sodium phenoxyacetate 2918 99 90 Other 2921 21 Ethylenediamine and its salts 2921 51 90 Other (Aromatic polyamines and their derivatives; salts thereof) 124Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Commodity code (1) Description (2) 2922 19 Other 2922 41 Amino-acids, other than those containing more than one kind of oxygen function, and their esters; salts thereof 2922 49 Other (Oxygen-function amino-compounds) 2931 90 Other organo-inorganic compounds 2932 11 Compounds containing an unfused furan ring (whether or not hydrogenated) in the structure 2932 13 Furfuryl alcohol and tetrahydrofurfuryl alcohol 2932 20 20 Gamma-butyrolactone (CAS 96-48-0) 2934 20 20 Di(benzothiazol-2-yl) disulphide;

benzothiazole-2-thiol (mercaptobenzothiazole) and its salts 2934 20 80 Other 2935 90 90 Sulphonamides (excluding perfluorooctane sulphonamides, 3-{1- [7-“hexadecylsulphonylamino”-1H-indole-3- yl]-3-oxo-1H, 3H-naphtho[1,8-cd]pyran-1-yl}- N,N-dimethyl-1H-indole-7-sulphonamide and metosulam “ISO” 2942 Other organic compounds 3204 17 Synthetic organic pigments; preparations based on synthetic organic pigments of a kind used to dye fabrics or produce colorant preparations (excluding preparations of heading 3207, 3208, 3209, 3210, 3213 and 3215, and subheading

320418) 3206 11 Pigments and preparations based on titanium dioxide 3209 10 Paints and varnishes, incl. enamels and lacquers, based on acrylic or vinyl polymers, dispersed or dissolved in an aqueous medium 3402 39 90 Other 3402 42 Non-ionic 3404 90 Other (Artificial waxes and prepared waxes) 3506 10 Products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg 3802 10 Activated carbon (CAS 64365-11-3) 3824 60 19 Other (Sorbitol other than that of subheading 2905 44 / in Aqueous solution) 125Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Commodity code (1) Description (2) 3901 Polymers of ethylene, in primary forms 3905 29 Vinyl acetate copolymers, in aqueous dispersion 3906 90 Other (Acrylic Polymers in primary forms) 3907 Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms (also partly in electronic and cable industry) 3913 90 Other 3919 10 Strips, the coating of which consists of unvulcanised natural or synthetic rubber 4009 Tubes, pipes and hoses, of vulcanised rubber other than hard rubber, with or without their fittings (for example, joints, elbows, flanges) 4010 Conveyor or transmission belts or belting, of vulcanised rubber 4011 50 Of a kind used on bicycles (tyres) 4016 Other articles of vulcanised rubber other than hard rubber 4017 Hard rubber (for example, ebonite) in all forms, including waste and scrap; articles of hard rubber 5402 11 High tenacity yarn of nylon or other polyamides, whether or not textured 5402 19 Other High tenacity yarn of nylon or other polyamides, whether or not textured 5407 10 Woven fabrics obtained from high-tenacity yarn of nylon or other polyamides or of polyester 5509 11 Containing 85% or more by weight of staple fibres of nylon or other polyamides 5509 12 Multiple (folded) or cabled yarn (Containing 85% or more by weight of staple fibres of nylon or other polyamides) 5509 42 Multiple (folded) or cabled yarn (Other yarn, containing 85% or more by weight of synthetic staple fibres) 5603 11 90 Other (Textiles / Nonwoven) 5603 12 90 Other (Textiles / Nonwoven) 5603 13 90 Other (Textiles / Nonwoven) 5902 10 Of nylon or other polyamides 126Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Commodity code (1) Description (2) 6909 11 Ceramic wares for laboratory, chemical or other technical uses 7019 Glass fibres (including glass wool) and articles thereof (for example, yarn, rovings, woven fabrics) 8207 19 10 With working part of diamond or agglomerated diamond, base metals and articles of base metal 8207 70 90 Base metals and articles of base metal, Other 8207 80 Tools for turning 8207 90 10 Base metals and articles of base metal, With working part of diamond or agglomerated diamond 8207 90 99 Base metals and articles of base metal, Other 8401 20 Machinery and apparatus for isotopic separation, and parts thereof 8527 Reception apparatus for radiobroadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock 8532 Electrical capacitors, fixed, variable or adjustable (pre-set) 8538 Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537 Ex 8543 Electrical machines and apparatus, having individual functions, not specified or included elsewhere in Chapter 85 excluding any thing falling within commodity code 8543 70 90 9405 Luminaires and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included;

illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included” 127Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Schedule 5 Regulation 16(26) New Schedule 3IA “Schedule 3IA Regulation 21(1) Sectoral software and technology

1. Paragraphs 2, 3 and 4 describe software and technology which is “sectoral software and technology”.

2. Business Enterprise software and technology meaning—

(a) enterprise resource planning software;

(b) customer relationship management software;

(c) business intelligence software;

(d) supply chain management software;

(e) enterprise data warehouse software;

(f) computerised maintenance management systems;

(g) project management software;

(h) product lifecycle management software;

(i) any component of the software described in sub-paragraphs (a) to (h), including human resource, accounting or fleet management components;

(j) any other information comprised in the software described in sub-paragraphs (a) to (h); and

(k) technology required for the development, production or use of the software described in sub-paragraphs (a) to (h);

3. Industrial Design software and technology meaning—

(a) building information modelling software;

(b) computer aided design software;

(c) computer aided manufacture software;

(d) engineer to order software;

(e) any component of the software described in sub-paragraphs (a) to (d);

(f) any other information comprised in the software described in sub-paragraphs (a) to (d); and

(g) technology required for the development, production or use of the software described in paragraphs (a) to (d);

4. Oil and gas related software and technology meaning—

(a) oil and gas exploration and oil and gas production software;

(b) reservoir simulation software;

(c) drilling and completion software;

(d) software for oil and gas production management;

(e) hydraulic fracturing design and analysis software;

(f) any component of the software described in sub-paragraphs (a) to (e);

(g) any other information comprised in, or for use in, the software described in sub-paragraphs

(a) to (e), including seismic analysis data or hydraulic fracturing data; and 128Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

(h) technology required for the development, production or use of the software described in sub-paragraphs (a) to (e).

5. For the purposes of this Schedule, “technology” has the meaning given in paragraph 37 of Schedule 1 to the Act.” Schedule 6 Regulation 16(27) Omission of commodity codes and associated descriptions

1. In Schedule 3A (luxury goods), in Part 2, the omitted commodity codes (and the associated descriptions) are— 8428 60 00;

8512 20;

8512 30 10;

8512 30 90;

8512 40;

8527 12;

8716 10;

8716 40;

9504 50.

2. In Schedule 3E (G7 dependency and further goods and G7 dependency and further technology), the omitted commodity codes (and the associated descriptions) are—

(a) in Part 3— 2905 13;

3909 40;

8716 20.

(b) in Part 4— 2811 22;

3812 39 10;

3903 11;

3912 20;

3920 71;

3921 13 10;

7222 19 10;

7223 00 11;

7229 20;

8421 21;

8421 32;

8522 90;

8527 13;

8527 19;

129Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

8527 29;

8527 91;

8527 92;

8527 99;

8543 10;

8543 70 10;

8543 70 30;

8543 70 90;

8543 90;

8716 31;

8716 40.

3. In Schedule 3I (Russia’s vulnerable goods and Russia’s vulnerable technology), the omitted commodity codes (and the associated descriptions) are— 8421 29 80 8421 31 00 8421 99 10 8421 99 90 8428 10 20 8428 10 80 8428 31 00 8428 39 20 8428 39 90 8428 40 00 8512 10 00 8512 90 10 8512 90 90 8532 21 00 8532 22 00 8532 23 00 8532 24 00 8532 25 00 8532 29 00 8532 30 00 8532 90 00 8538 90 19 8538 90 91 8538 90 99 8543 20 00 8543 40 000 130Document Generated: 2025-04-24

Status: This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

EXPLANATORY NOTE (This note is not part of the Regulations) These Regulations are made under the Sanctions and Anti-Money Laundering Act 2018 (c. 13).

Regulations 3 to 16 amend the Russia (Sanctions) (EU Exit) Regulations 2019 (S.I. 2019/855) (“the 2019 Regulations”). Regulation 17 makes transitional provision.

Regulation 3, for the purposes of the imposition of trade sanctions in Part 5, adds definitions of “energy-related technology”, “G7 dependency and further technology”, “Russia’s vulnerable technology” and “sectoral software and technology”. Regulations 4, 5, 8 and 9 impose the corresponding prohibitions (“the new prohibitions”) and regulation 16(26) and Schedule 5 add relevant definitions in relation to the “sectoral software and technology” prohibitions.

Regulation 7 imposes prohibitions in relation to the import of relevant processed synthetic diamonds.

Regulation 6 makes a consequential amendment.

Regulations 10 to 14 create exceptions to the new prohibitions.

Regulation 15 both prescribes offences created by these Regulations and other regulations amending the 2019 Regulations, the suspected commission of which may be referred to His Majesty’s Revenue and Customs for investigation, and creates exceptions to such referrals in certain cases.

Regulation 16 amends certain Schedules to the 2019 Regulations.

The transitional provision in regulation 17 relates to licences issued under regulation 65 of the 2019 Regulations. These licences ensure that the licence holder is not subject to certain prohibitions in those Regulations in respect of the activities specified in the licence. Regulation 17 provides that such licences issued before these Regulations come into force, will continue to apply on and after that date in respect of certain activities which would otherwise be subject to the new prohibitions.

A full impact assessment has not been produced for this instrument as no, or no significant, impact on the private, voluntary or public sectors is foreseen.

131