Aequs Limited - Prospectus

F. dumm* PROSPECTUS Dated December 5, 2025 Please read Section 26 of the Companies Act 2013 100% Book Built Offer (Please scan this QR (cPoldeea se tsoc an vtiheiws QRt hceo de to view this Prospectus) UDRHP-I) AEQUS LIMITED

CORPORATE IDENTITY NUMBER: U80302KA2000PLC026760 REGISTERED CORPORATE CONTACT PERSON E-MAIL AND TELEPHONE WEBSITE OFFICE OFFICE Aequs Tower, No. 55, Aequs SEZ, No. 437/A, Ravi Mallikarjun Hugar E-mail: www.aequs.com Whitefield Main Road, Hattargi Village, Company Secretary and investor.relations@aequs.com Mahadevapura Post, Hukkeri Taluk, Compliance Officer Tel: +91 96 3205 8521 Bengaluru 560 048, Belagavi 591 243, Karnataka, India Karnataka, India

OUR PROMOTERS: ARAVIND SHIVAPUTRAPPA MELLIGERI, AEQUS MANUFACTURING INVESTMENTS PRIVATE LIMITED, MELLIGERI PRIVATE FAMILY FOUNDATION AND THE MELLIGERI FOUNDATION DETAILS OF THE OFFER Fresh Issue Offer for Total Offer Eligibility and share reservation among QIBs, NIIs, RIIs and Eligible Type size Sale size size Employees Fresh Issue 54,047,958* 20,307,393* 74,355,351* The Offer was made pursuant to Regulation 6(2) of the Securities and and Offer for Equity Equity Equity Exchange Board of India (Issue of Capital and Disclosure Requirements) Sale Shares Shares Shares Regulations, 2018, as amended (“SEBI ICDR Regulations”), as our bearing face bearing face bearing face Company did not fulfil requirements under Regulation 6(1)(b) of the SEBI value of ₹ 10 value of ₹ value of ₹ 10 ICDR Regulations. The Company did not have an average operating profit of each 10 each each at least ₹ 150 million, calculated on a restated and on consolidated basis, during aggregating aggregating aggregating the preceding three Financial Years ended March 31, 2025, March 31, 2024 to ₹ 6,700.00 to ₹ to ₹ 9,218.12 and March 31, 2023, with operating profit in the Financial Year ended March million 2,518.12 million 31, 2024 and operating loss in the Financial Years ended March 31, 2025 and million March 31, 2023 on a restated and consolidated basis, respectively. For further details, see “Other Regulatory and Statutory Disclosures – Eligibility for the Offer” on page 592. For details in relation to share allocation and reservation among QIBs, NIIs, RIIs and Eligible Employees, see “Offer Structure” on page 616.

DETAILS OF THE OFFER FOR SALE NAME OF TYPE NUMBER OF WEIGHTED NAME OF TYPE NUMBER OF WEIGHTED THE SELLING OFFERED AVERAGE THE SELLING OFFERED AVERAGE SHAREHOLD SHARES/ COST OF SHAREHOLD SHARES/ COST OF ER AMOUNT (IN ₹ ACQUISITION ER AMOUNT (IN ₹ ACQUISITIO MILLION) PER EQUITY MILLION) N PER SHARE EQUITY BEARING SHARE FACE VALUE BEARING OF ₹ 10 EACH FACE VALUE (IN ₹)^ OF ₹ 10 EACH (IN ₹)^ 7,481,908* Equity 871,308* Equity Amicus Capital Investor Shares bearing face Individual Shares bearing face Ravindra Private Equity I Selling value of ₹ 10 each 29.48 Selling value of ₹ 10 each 41.61 Mariwala LLP Shareholder aggregating to ₹ Shareholder aggregating to ₹

927.76 million 108.04 million 8,879,915* Equity 435,656* Equity Amicus Capital Investor Shares bearing face Vasundhara Investor Shares bearing face Partners India Selling value of ₹ 10 each 30.78 Dempo Family Selling value of ₹ 10 each 41.61 Fund II Shareholder aggregating to ₹ Private Trust Shareholder aggregating to ₹ 1,101.11 million 54.02 million 1,323,500* Equity 435,656* Equity Melligeri Private Promoter Shares bearing face Girija Dempo Investor Shares bearing face Family Selling value of ₹ 10 each 1.18 Family Private Selling value of ₹ 10 each 41.61 Foundation Shareholder aggregating to ₹ Trust Shareholder aggregating to ₹

164.11 million 54.02 million 754,450* Equity 100,000* Equity Aequs Amicus Capital Investor Shares bearing face Promoter Shares bearing face Manufacturing Partners India Selling value of ₹ 10 each 29.48 Selling value of ₹ 10 each 29.11 Investments Fund I Shareholder aggregating to ₹ Shareholder aggregating to ₹ Private Limited

93.55 million 12.40 million 25,000* Equity Individual Shares bearing face Raman Selling value of ₹ 10 each 74.64 Subramanian Shareholder aggregating to ₹ 3.10 million ^As certified by Manian & Rao, Chartered Accountants (FRN No. 001983S), by way of their certificate dated December 5, 2025.

*Subject to finalization of Basis of AllotmentRISKS IN RELATION TO THE FIRST OFFER The face value of the Equity Shares is ₹ 10 each. This being the first public issue of Equity Shares of our Company, there has been no formal market for the Equity Shares. The Floor Price, Cap Price and Offer Price each as determined and justified by our Company in consultation with the Book Running Lead Managers (“BRLMs”), in accordance with SEBI ICDR Regulations, on the basis of the assessment of market demand for the Equity Shares by way of the Book Building Process, as stated in “Basis for Offer Price” on page 166 should not be considered to be indicative of the market price of the Equity Shares after the Equity Shares are listed. No assurance can be given regarding an active or sustained trading in the Equity Shares nor regarding the price at which the Equity Shares will be traded after listing.

GENERAL RISK Investments in equity and equity-related securities involve a degree of risk and investors should not invest any funds in the Offer unless they can afford to take the risk of losing their entire investment. Investors are advised to read the risk factors carefully before taking an investment decision in the Offer. For taking an investment decision, investors must rely on their own examination of our Company and the Offer, including the risks involved. The Equity Shares offered in the Offer have not been recommended or approved by the Securities and Exchange Board of India (“SEBI”), nor does SEBI guarantee the accuracy or adequacy of the contents of this Prospectus. Specific attention of the investors is invited to “Risk Factors” on page 37.

ISSUER’S AND SELLING SHAREHOLDERS’ ABSOLUTE RESPONSIBILITY Our Company, having made all reasonable inquiries, accepts responsibility for and confirms that this Prospectus contains all information with regard to our Company and the Offer, which is material in the context of the Offer, that the information contained in this Prospectus is true and correct in all material aspects and is not misleading in any material respect, that the opinions and intentions expressed herein are honestly held and that there are no other facts, the omission of which makes this Prospectus as a whole or any of such information or the expression of any such opinions or intentions, misleading in any material respect. The Selling Shareholders, severally and not jointly, accept responsibility for and confirm only the statements expressly made or confirmed by them in this Prospectus to the extent of information solely pertaining to themselves and their respective portion of the Offered Shares and assume responsibility that such statements are true and correct in all material respects and not misleading in any material respect.

LISTING The Equity Shares offered through the Red Herring Prospectus and this Prospectus are proposed to be listed on the Stock Exchanges being BSE Limited (“BSE”) and National Stock Exchange of India Limited (“NSE” and together with BSE, the “Stock Exchanges”). For the purposes of the Offer, NSE is the Designated Stock Exchange.

DETAILS OF BOOK RUNNING LEAD MANAGERS Name and logo of Book Running Lead Managers Contact E-mail and Telephone Person E-mail: aequs.ipo@jmfl.com JM Financial Limited Prachee Dhuri

Tel: + 91 22 6630 3030 Dhruv IIFL Capital Services Bhavsar / E-mail: aequs.ipo@iiflcap.com Limited (formerly known

Pawan Kumar Tel: + 91 22 4646 4728 as IIFL Securities Limited) Jain Kotak Mahindra Capital E-mail: aequs.ipo@kotak.com Ganesh Rane

Company Limited Tel: +91 22 4336 0000 REGISTRAR TO THE OFFER Name of the Registrar Contact person E-mail and Telephone E-mail: aequs.ipo@kfintech.com KFin Technologies Limited M. Murali Krishna

Tel: + 91 40 6716 2222/ 1800 309 4001 BID/OFFER PERIOD Tuesday, Wednesday, Friday, Anchor Investor Bid/Offer opened December 2, December 3, Bid/Offer closed on December 5, Bidding Date on 2025 2025 2025 * Our Company, in consultation with the BRLMs, undertook a private placement of Equity Shares, as permitted under applicable law, aggregating to ₹ 1,440.00 million (“Pre- IPO Placement”). The Pre-IPO Placement was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term and Think India Opportunities Master Fund LP at a price of ₹ 123.97 per Equity Share bearing face value ₹ 10 each, decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue, as disclosed in the UDRHP – I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue, as disclosed in the UDRHP - I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.PROSPECTUS Dated December 5, 2025 Please read Section 26 of the Companies Act 2013 100% Book Built Offer AEQUS LIMITED Our Company was originally incorporated as “Mechanical Training Acadamy Private Limited” on March 27, 2000, as a private limited company under the Companies Act, 1956 at Bengaluru, Karnataka, India, pursuant to a certificate of incorporation issued by the Registrar of Companies, Karnataka at Bengaluru (“RoC”). The name of our Company was changed to “QuEST Machining & Manufacturing Private Limited”, pursuant to a resolution passed by our Board dated February 24, 2006, and a special resolution passed by our Shareholders dated March 24, 2006 and a fresh certificate of incorporation dated April 18, 2006 was issued by the RoC. Subsequently, pursuant to a resolution passed by our Board dated February 22, 2011, and a special resolution passed by our Shareholders dated March 7, 2011, the name of our Company was changed to “QuEST Global Manufacturing Private Limited” and a fresh certificate of incorporation dated March 24, 2011 was issued by the RoC. Thereafter, pursuant to a resolution passed by our Board dated January 23, 2014 and a special resolution passed by our Shareholders dated February 25, 2014, the name of our Company was changed to “Aequs Private Limited” and a fresh certificate of incorporation dated March 5, 2014 was issued by the RoC. Upon the conversion of our Company into a public limited company, pursuant to a resolution passed by our Board on April 9, 2025 and a special resolution passed by our Shareholders on April 25, 2025, the name of our Company was changed to “Aequs Limited”, and a fresh certificate of incorporation dated May 7, 2025 was issued by the RoC CPC. For details of changes in the registered office of our Company, see “History and Certain Corporate Matters – Changes in the registered office of our Company” on page 335.

Corporate Identity Number: U80302KA2000PLC026760

Registered Office: Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru 560 048, Karnataka, India; Corporate Office: Aequs SEZ, No. 437/A, Hattargi Village, Hukkeri Taluk, Belagavi 591 243, Karnataka, India

Contact Person: Ravi Mallikarjun Hugar, Company Secretary and Compliance Officer; E-mail: investor.relations@aequs.com; Tel:+91 96 3205 8521; Website: www.aequs.com

OUR PROMOTERS: ARAVIND SHIVAPUTRAPPA MELLIGERI, AEQUS MANUFACTURING INVESTMENTS PRIVATE LIMITED, MELLIGERI PRIVATE FAMILY FOUNDATION AND THE MELLIGERI FOUNDATION INITIAL PUBLIC OFFERING OF 74,355,351* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH (THE “EQUITY SHARES”) OF AEQUS LIMITED (“COMPANY” OR “ISSUER”) FOR CASH AT A PRICE OF ₹ 124.00 PER EQUITY SHARE INCLUDING A SHARE PREMIUM OF ₹ 114 PER EQUITY SHARE (THE “OFFER PRICE”) AGGREGATING TO ₹ 9,218.12 MILLION (THE “OFFER”) COMPRISING A FRESH ISSUE OF 54,047,958* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 6,700.00 MILLION (THE “FRESH ISSUE”) AND AN OFFER FOR SALE OF 20,307,393* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 2,518.12 MILLION, COMPRISING AN OFFER FOR SALE OF 100,000* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 12.40 MILLION BY AEQUS MANUFACTURING INVESTMENTS PRIVATE LIMITED, 1,323,500* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 164.11 MILLION BY MELLIGERI PRIVATE FAMILY FOUNDATION (“PROMOTER SELLING SHAREHOLDERS”), 7,481,908* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 927.76 MILLION BY AMICUS CAPITAL PRIVATE EQUITY I LLP, 754,450* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 93.55 MILLION BY AMICUS CAPITAL PARTNERS INDIA FUND I, 8,879,915* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 1,101.11 MILLION BY AMICUS CAPITAL PARTNERS INDIA FUND II, TO 435,656* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 54.02 MILLION BY VASUNDHARA DEMPO FAMILY PRIVATE TRUST, 435,656* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 54.02 MILLION BY GIRIJA DEMPO FAMILY PRIVATE TRUST (“INVESTOR SELLING SHAREHOLDERS”), 871,308* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 108.04 MILLION BY RAVINDRA MARIWALA, AND 25,000* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 3.10 MILLION BY RAMAN SUBRAMANIAN (“INDIVIDUAL SELLING SHAREHOLDERS”, TOGETHER WITH THE PROMOTER SELLING SHAREHOLDERS AND INVESTOR SELLING SHAREHOLDERS, THE “SELLING SHAREHOLDERS”) (THE “OFFER FOR SALE” AND TOGETHER WITH THE FRESH ISSUE, THE “OFFER”).

THE OFFER INCLUDED A RESERVATION OF 176,991* EQUITY SHARES OF FACE VALUE OF ₹ 10 EACH, AGGREGATING TO ₹ 20.00 MILLION (CONSTITUTING 0.03% OF THE POST OFFER PAID-UP EQUITY SHARE CAPITAL OF OUR COMPANY FOR SUBSCRIPTION BY ELIGIBLE EMPLOYEES (THE “EMPLOYEE RESERVATION PORTION”). THE OFFER LESS THE EMPLOYEE RESERVATION PORTION IS HEREINAFTER REFERRED TO AS THE “NET OFFER”. THE OFFER AND THE NET OFFER CONSTITUTED 11.09% AND 11.06% OF THE POST-OFFER PAID-UP EQUITY SHARE CAPITAL OF OUR COMPANY, RESPECTIVELY. OUR COMPANY, IN CONSULTATION WITH THE BRLMS, OFFERED A DISCOUNT OF ₹ 11.00 PER EQUITY SHARE, I.E., 8.87% OF THE OFFER PRICE TO ELIGIBLE EMPLOYEES BIDDING IN THE EMPLOYEE RESERVATION PORTION (“EMPLOYEE DISCOUNT”).

OUR COMPANY IN CONSULTATION WITH THE BRLMS, UNDERTOOK A PRE-IPO PLACEMENT AGGREGATING TO ₹ 1,440.00 MILLION, PRIOR TO FILING OF THE RED HERRING PROSPECTUS WITH THE ROC, AS PERMITTED UNDER APPLICABLE LAW. THE PRE-IPO PLACEMENT, WAS MADE TO SBI EMERGENT INDIA FUND, DSP INDIA FUND - INDIA LONG / SHORT STRATEGY FUND WITH CASH MANAGEMENT OPTION, SBI OPTIMAL EQUITY FUND – LONG TERM, AND THINK INDIA OPPORTUNITIES MASTER FUND LP AT A PRICE OF ₹ 123.97 PER EQUITY SHARE BEARING FACE VALUE ₹ 10 EACH, DECIDED BY OUR COMPANY, IN CONSULTATION WITH THE BRLMS.WHILE THE AMOUNT RAISED PURSUANT TO THE PRE-IPO PLACEMENT WAS REDUCED FROM THE FRESH ISSUE, AS DISCLOSED IN THE UDRHP – I, OUR COMPANY HAD INCREASED THE SIZE OF THE FRESH ISSUE SUCH THAT THE REVISED SIZE OF THE FRESH ISSUE WAS 54,047,958* EQUITY SHARES BEARING FACE VALUE OF ₹ 10 EACH AGGREGATING TO ₹ 6,700.00 MILLION.

THE PRE-IPO PLACEMENT, DID NOT EXCEED 20% OF THE SIZE OF THE FRESH ISSUE, AS DISCLOSED IN THE UDRHP-I. OUR COMPANY HAD APPROPRIATELY INTIMATED THE SUBSCRIBERS TO THE PRE-IPO PLACEMENT, PRIOR TO ALLOTMENT PURSUANT TO THE PRE-IPO PLACEMENT, THAT THERE WAS NO GUARANTEE THAT OUR COMPANY WOULD PROCEED WITH THE OFFER OR THE OFFER WOULD BE SUCCESSFUL AND RESULT INTO LISTING OF THE EQUITY SHARES ON THE STOCK EXCHANGES. FURTHER, RELEVANT DISCLOSURES IN RELATION TO SUCH INTIMATION TO THE SUBSCRIBERS TO THE PRE- IPO PLACEMENT HAVE BEEN APPROPRIATELY MADE IN THE RELEVANT SECTIONS OF THE RED HERRING PROSPECTUS AND THIS PROSPECTUS.

THE FACE VALUE OF THE EQUITY SHARES IS ₹ 10 EACH. THE OFFER PRICE IS 12.40 TIMES THE FACE VALUE OF THE EQUITY SHARES. *SUBJECT TO FINALISATION OF BASIS OF ALLOTMENT The Offer was made in terms of Rule 19(2)(b) of the Securities Contracts (Regulation) Rules (“SCRR”) read with Regulation 31 of the SEBI ICDR Regulations. The Offer was made through the Book Building Process, in compliance with Regulation 6(2) of the SEBI ICDR Regulations, wherein at least 75% of the Net Offer was made available for allocation on a proportionate basis to Qualified Institutional Buyers (“QIBs”) (the “QIB Portion”), provided that our Company in consultation with the Book Running Lead Managers, allocated 60% of the QIB Portion to Anchor Investors, on a discretionary basis in accordance with the SEBI ICDR Regulations (the “Anchor Investor Portion”), of which one-third was reserved for domestic Mutual Funds, subject to valid Bids having been received from domestic Mutual Funds at or above the price at which Equity Shares are allocated to Anchor Investors. In the event of under-subscription or non-allocation in the Anchor Investor Portion, the balance Equity Shares were required to be added to the QIB Portion (excluding the Anchor Investor Portion) (“Net QIB Portion”). Further, 5% of the Net QIB Portion was made available for allocation on a proportionate basis to Mutual Funds only and the remainder of the Net QIB Portion was made available for allocation on a proportionate basis to all QIBs (other than Anchor Investors), including Mutual Funds, subject to valid Bids having been received at or above the Offer Price. If at least 75% of the Net Offer cannot be Allotted to QIBs, then the entire application money will be refunded forthwith. Further, not more than 15% of the Net Offer was made available for allocation to non-institutional investors (“Non-Institutional Investors” or “NIIs”) (the “Non-Institutional Portion”) of which one-third of the Non-Institutional Portion was made available for allocation to Bidders with an application size of more than ₹ 0.20 million and up to ₹ 1.00 million and two-thirds of the Non-Institutional Portion was made available for allocation to Bidders with an application size of more than ₹ 1.00 million and under-subscription in either of these two sub-categories of Non-Institutional Portion was allocated to Bidders in the other sub-category of Non-Institutional Portion in accordance with the SEBI ICDR Regulations, subject to valid Bids having been received at or above the Offer Price. The allocation to each Non-Institutional Investor was not less than the minimum application size, subject to availability of Equity Shares in the Non-Institutional Portion and the remaining available Equity Shares, if any, were allocated on a proportionate basis in accordance with the conditions specified in this regard in Schedule XIII of the SEBI ICDR Regulations. Further, not more than 10% of the Net Offer was made available for allocation to retail individual investors (“Retail Individual Investors” or “RIIs”) (the “Retail Portion”) in accordance with the SEBI ICDR Regulations, subject to valid Bids having been received at or above the Offer Price. Further, Equity Shares were allocated on a proportionate basis to Eligible Employees applying under the Employee Reservation Portion, subject to valid Bids having been received from them at or above the Offer Price (net of Employee Discount, as applicable). All Bidders (other than Anchor Investors) were required to mandatorily participate in the Offer through the Application Supported by Block Amount (“ASBA”) process and had provided details of their respective bank account (including UPI ID for UPI Bidders (defined hereinafter)) in which the Bid Amount had been blocked by the SCSBs or the Sponsor Bank(s), as the case may be. Anchor Investors were not permitted to participate in the Offer through the ASBA process. For details, specific attention is invited to “Offer Procedure” on page 623.

RISKS IN RELATION TO THE FIRST OFFER This being the first public offer of our Company, there has been no formal market for the Equity Shares. The face value of the Equity Shares is ₹ 10 each. The Floor Price, Cap Price and Offer Price each (as determined and justified by our Company, in consultation with the Book Running Lead Managers, in accordance with the SEBI ICDR Regulations, on the basis of the assessment of market demand for the Equity Shares by way of the Book Building Process, as stated in “Basis for Offer Price” on page 166 should not be considered to be indicative of the market price of the Equity Shares after the Equity Shares are listed. No assurance can be given regarding an active or sustained trading in the Equity Shares nor regarding the price at which the Equity Shares will be traded after listing.

GENERAL RISK Investments in equity and equity-related securities involve a degree of risk and investors should not invest any funds in the Offer unless they can afford to take the risk of losing their entire investment. Investors are advised to read the risk factors carefully before taking an investment decision in the Offer. For taking an investment decision, investors must rely on their own examination of our Company and the Offer, including the risks involved. The Equity Shares offered in the Offer have not been recommended or approved by SEBI, nor does SEBI guarantee the accuracy or adequacy of the contents of this Prospectus. Specific attention of the investors is invited to “Risk Factors” on page 37.

ISSUER’S AND SELLING SHAREHOLDERS’ ABSOLUTE RESPONSIBILITY Our Company, having made all reasonable inquiries, accepts responsibility for and confirms that this Prospectus contains all information with regard to our Company and the Offer, which is material in the context of the Offer, that the information contained in this Prospectus is true and correct in all material aspects and is not misleading in any material respect, that the opinions and intentions expressed herein are honestly held and that there are no other facts, the omission of which makes this Prospectus as a whole or any of such information or the expression of any such opinions or intentions, misleading in any material respect. The Selling Shareholders, severally and not jointly, accept responsibility for and confirm only the statements expressly made or confirmed by them in this Prospectus to the extent of information solely pertaining to themselves and their respective portion of the Offered Shares and assume responsibility that such statements are true and correct in all material respects and not misleading in any material respect.

LISTING The Equity Shares offered through the Red Herring Prospectus and this Prospectus are proposed to be listed on the Stock Exchanges. Our Company has received in-principle approvals from BSE and NSE for the listing of the Equity Shares pursuant to letters each dated July 31, 2025. For the purpose of this Offer, NSE is the Designated Stock Exchange. A signed copy of the Red Herring Prospectus has been filed with the RoC in accordance with Section 32 and a signed copy of this Prospectus has been filed with

Section 26(4) of the Companies Act 2013. For details of the material contracts and documents which were available for inspection from the date of the Red Herring Prospectus up to the Bid/Offer Closing Date, see “Material Contracts and Documents for Inspection” on page 682.

BOOK RUNNING LEAD MANAGERS REGISTRAR TO THE OFFER JM Financial Limited IIFL Capital Services Limited (formerly known as IIFL Kotak Mahindra Capital Company Limited KFin Technologies Limited 7th Floor, Cnergy Securities Limited) 27 BKC, 1st Floor Selenium, Tower-B, Plot No. 31 & 32, Financial District Appasaheb Marathe Marg 24th Floor, One Lodha Place, Senapati Bapat Marg Plot No. C – 27, “G” Block Nanakramguda, Serilingampally, Rangareddi Prabhadevi, Mumbai 400 025 Lower Parel (West), Mumbai 400 013 Bandra Kurla Complex, Bandra (East), Mumbai 400 051 Hyderabad 500 032 Maharashtra, India Maharashtra, India Maharashtra, India Telangana, India

Tel: + 91 22 6630 3030 Tel: + 91 22 4646 4728 Tel: +91 22 4336 0000 Tel: + 91 40 6716 2222/ 1800 309 4001 E-mail: aequs.ipo@jmfl.com E-mail: aequs.ipo@iiflcap.com E-mail: aequs.ipo@kotak.com E-mail: aequs.ipo@kfintech.com

Website: www.jmfl.com Website: www.iiflcapital.com Website: https://investmentbank.kotak.com/ Website: www.kfintech.com Investor grievance e-mail: grievance.ibd@jmfl.com Investor grievance e-mail: ig.ib@iiflcap.com Investor grievance e-mail: kmccredressal@kotak.com Investor grievance e-mail: einward.ris@kfintech.com

Contact person: Prachee Dhuri Contact person: Dhruv Bhavsar / Pawan Kumar Jain Contact person: Ganesh Rane Contact person: M. Murali Krishna SEBI registration no.: INM000010361 SEBI registration no.: INM000010940 SEBI registration no.: INM000008704 SEBI registration no.: INR000000221 BID/OFFER PERIOD Anchor Investor Tuesday, December 2, Bid/Offer opened on Wednesday, December 3, 2025 Bid/Offer closed on Friday, December 5, 2025 Bidding Date 2025TABLE OF CONTENTS

SECTION I - GENERAL ..................................................................................................................................... 1 DEFINITIONS AND ABBREVIATIONS ..................................................................................................... 1 SUMMARY OF THE OFFER DOCUMENT ............................................................................................. 18 CERTAIN CONVENTIONS, USE OF FINANCIAL INFORMATION AND MARKET DATA AND CURRENCY OF PRESENTATION ............................................................................................................ 32 FORWARD-LOOKING STATEMENTS ................................................................................................... 36

SECTION II - RISK FACTORS ....................................................................................................................... 37

SECTION III – INTRODUCTION ................................................................................................................... 95 THE OFFER .................................................................................................................................................. 95 SUMMARY FINANCIAL INFORMATION .............................................................................................. 98 GENERAL INFORMATION ..................................................................................................................... 105 CAPITAL STRUCTURE ............................................................................................................................ 115 OBJECTS OF THE OFFER ....................................................................................................................... 147 BASIS FOR OFFER PRICE ...................................................................................................................... 166 STATEMENT OF POSSIBLE TAX BENEFITS ..................................................................................... 189

SECTION IV: ABOUT OUR COMPANY ..................................................................................................... 219 INDUSTRY OVERVIEW ........................................................................................................................... 219 OUR BUSINESS........................................................................................................................................... 288 KEY REGULATIONS AND POLICIES ................................................................................................... 327 HISTORY AND CERTAIN CORPORATE MATTERS ......................................................................... 335 OUR SUBSIDIARIES AND JOINT VENTURES .................................................................................... 342 OUR MANAGEMENT ............................................................................................................................... 360 OUR PROMOTERS AND PROMOTER GROUP .................................................................................. 377 DIVIDEND POLICY ................................................................................................................................... 382

SECTION V – FINANCIAL INFORMATION ............................................................................................. 383 RESTATED CONSOLIDATED FINANCIAL INFORMATION .......................................................... 383 OTHER FINANCIAL INFORMATION ................................................................................................... 535 MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS ...................................................................................................................................... 539 CAPITALISATION STATEMENT ........................................................................................................... 576 FINANCIAL INDEBTEDNESS ................................................................................................................. 577

SECTION VI – LEGAL AND OTHER INFORMATION ........................................................................... 581 OUTSTANDING LITIGATION AND OTHER MATERIAL DEVELOPMENTS .............................. 581 GOVERNMENT AND OTHER APPROVALS ........................................................................................ 586 OUR GROUP COMPANIES ...................................................................................................................... 589 OTHER REGULATORY AND STATUTORY DISCLOSURES ........................................................... 591

SECTION VII – OFFER RELATED INFORMATION ............................................................................... 609 TERMS OF THE OFFER ........................................................................................................................... 609 OFFER STRUCTURE ................................................................................................................................ 616 OFFER PROCEDURE................................................................................................................................ 623 RESTRICTION ON FOREIGN OWNERSHIP OF INDIAN SECURITIES ........................................ 644

SECTION VIII – MAIN PROVISIONS OF THE ARTICLES OF ASSOCIATION ................................ 646

SECTION IX – OTHER INFORMATION .................................................................................................... 681 MATERIAL CONTRACTS AND DOCUMENTS FOR INSPECTION ................................................ 681 DECLARATION ......................................................................................................................................... 685SECTION I - GENERAL DEFINITIONS AND ABBREVIATIONS Unless the context otherwise indicates or implies or unless otherwise specified, the following terms and abbreviations have the following meanings in this Prospectus, and references to any statute or rules or guidelines or regulations or circulars or notifications or clarifications or policies will include any amendments, clarifications, modifications, replacements or re-enactments notified thereto, from time to time and any reference to a statutory provision shall include any subordinate legislation made from time to time under that provision.

Further, the Offer related terms used but not defined in this Prospectus shall have the meanings ascribed to such terms under the General Information Document. In case of any inconsistency between the definitions given below and the definitions contained in the General Information Document (as defined below), the definitions given below shall prevail.

Unless the context otherwise indicates, all references to “the Company”, and “our Company”, are references to Aequs Limited, a public limited company incorporated in India under the Companies Act 2013, with its Registered Office at Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru 560 048, Karnataka, India.

Furthermore, unless the context otherwise indicates, all references to the terms “we”, “us” and “our” are to our Company and our Subsidiaries (as defined below) on a consolidated basis.

The words and expressions used in this Prospectus but not defined herein, shall have, to the extent applicable, the meanings ascribed to such terms under the Companies Act 2013, the SEBI ICDR Regulations, the SEBI Listing Regulations, the SCRA, the Depositories Act or the rules and regulations made thereunder, as applicable.

Notwithstanding the foregoing, the terms used in “Basis for Offer Price”, “Statement of Possible Special Tax Benefits”, “Our Business”, “Industry Overview”, “Key Regulations and Policies”, “Restated Consolidated Financial Information”, “Outstanding Litigation and Other Material Developments”, “Government and Other Approvals”, “Restrictions on Foreign Ownership of Indian Securities” and “Main Provisions of the Articles of Association” on pages 166, 189, 288, 219, 327, 383,581, 586, 644 and 646, respectively, shall have the meanings ascribed to such terms in the relevant sections.

General Terms Term Description QR code for all weblinks indicated in the Offer Documents Company Related Terms Term Description AABV Aequs Aerospace B.V.

AAF Aequs Aerospace France SAS AAI Aerostructures Assemblies India Private Limited AALLC Aequs Aerospace LLC, USA AAM Aequs Aero Machine Inc.

Aerospace Segment Aerospace segment comprises manufacturing of precision engineered components for engine systems, landing systems, cargo and interiors, structures, assemblies and turning for our aerospace clients ACPL Aequs Cookware Private Limited ACPPL Aequs Consumer Products Private Limited AEPPL Aequs Engineered Plastics Private Limited AFC Aequs Force Consumer Products Private Limited AHF Aequs Holdings France SAS Amendment and Termination The amendment and termination agreement dated May 12, 2025 to the Shareholders’ Agreement Agreement entered into among our Company, Aequs Manufacturing Investments Private Limited, Melligeri Private Family Foundation, Aravind Shivaputrappa Melligeri, Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II, Amansa Investments Limited, Catamaran Ekam (acting through its trustee, Catamaran Advisors LLP), Steadview Capital Mauritius Limited, Sparta Group LLC, Ravindra K Mariwala, Vasundhara Dempo Family Private Trust, Girija Dempo Family Private Trust, Mukul Mahavir Agrawal and certain other Shareholders 1Term Description AMHPL Aerospace Manufacturing Holdings Private Limited AMIPL Aequs Manufacturing Investments Private Limited AOGLLC Aequs Oil & Gas LLC, USA API Aerospace Processing India Private Limited AREPL Aequs Rajas Extrusion Private Limited Articles of Association/ The articles of association of our Company, as amended from time to time Articles / AoA ATHPL Aequs Toys Hong Kong Private Limited* * The sole director of ATHPL through resolution dated July 15, 2025 has approved the process of winding up of ATHPL and appointment of liquidators in this regard.

ATPL Aequs Toys Private Limited ASMIPL AeroStructures Manufacturing India Private Limited Audit Committee The audit committee of our Board, as described in “Our Management – Board committees – Audit Committee” on page 366 Auditors / Statutory Auditors The statutory auditors of our Company, being B S R & Co. LLP, Chartered Accountants Belagavi Manufacturing Our manufacturing facilities located in Belagavi, Karnataka, India and operated by our Cluster Company, certain of our Subsidiaries, namely, (i) Aerostructures Assemblies India Private Limited, (ii) Aequs Engineered Plastics Private Limited, (iii) Aequs Force Consumer Products Private Limited, (iv) AeroStructures Manufacturing India Private Limited, and certain of our Joint Ventures, namely, (i) Aerospace Processing India Private Limited and

(ii) SQuAD Forging India Private Limited Board / Board of Directors The board of directors of our Company. For further details, please see “Our Management”, on page 360 CCPS / Preference Shares The compulsorily convertible preference shares of our Company bearing face value of ₹ 10 each Chief Financial Officer / CFO The chief financial officer of our Company, as described in “Our Management – Key Managerial Personnel and Senior Management - Key Managerial Personnel” on page 374 Cholet Facility Our manufacturing facility located in Cholet, France and operated by our Subsidiary, namely Aequs Aerospace France SAS Company Secretary and The company secretary and compliance officer of our Company, as described in “Our Compliance Officer Management – Key Managerial Personnel and Senior Management - Key Managerial Personnel” on page 374 Consumer Segment Consumer segment comprises manufacturing of products such as components for portable computers and smart devices, plastics such as outdoor toys, figurines and toy vehicles and consumer durable products such as non-stick cookware and small home appliances for our consumer clients Corporate Office The corporate office of our Company, situated at Aequs SEZ, No. 437/A, Hattargi Village, Hukkeri Taluk, Belagavi 591 243, Karnataka, India Corporate Promoter(s) Aequs Manufacturing Investments Private Limited, Melligeri Private Family Foundation and The Melligeri Foundation Corporate Social The corporate social responsibility committee of our Board, as described in “Our Responsibility Committee Management – Board committees – Corporate Social Responsibility Committee” on page 371 Director(s) The director(s) on our Board of Directors, as described in “Our Management” on page 360 Direct Subsidiaries The direct subsidiaries of our Company, namely

(i) AeroStructures Manufacturing India Private Limited;

(ii) Aerospace Manufacturing Holdings Private Limited;

(iii) Aerostructures Assemblies India Private Limited;

(iv) Aequs Oil & Gas LLC;

(v) Aequs Force Consumer Products Private Limited;

(vi) Aequs Consumer Products Private Limited;

(vii) Aequs Toys Private Limited;

(viii) Aequs Engineered Plastics Private Limited; and

(ix) Aequs Aerospace B.V.

For further details, see “Our Subsidiaries and Joint Ventures” on page 342 ESOP Plan 2025 Aequs Employee Stock Option Plan 2025, as amended from time to time Executive Chairman and The Executive Director, chairman and chief executive officer of our Company, as described Chief Executive Officer in “Our Management” on page 360 Executive Director(s) Executive director(s) on our Board, as described in “Our Management” on page 360 Equity Shares Unless otherwise stated, equity shares bearing face value of ₹ 10 each of our Company 2Term Description F&S Frost & Sullivan (India) Private Limited F&S Report Report titled “An Assessment of Aerospace and Consumer PEC Industry” dated November 14, 2025 commissioned by our Company and issued by F&S. The F&S Report has been exclusively commissioned and paid for by our Company in connection with the Offer. The F&S Report was made available on the website of our Company from the date of filing of the Red Herring Prospectus at www.aequs.com/investor/ until the Bid/ Offer Closing Date Girija Dempo Family Private Girija Dempo Family Private Trust (acting through its trustees, Shrinivas Vasudeva Dempo Trust and Pallavi Shrinivas Dempo) Group Companies Our group companies identified in accordance with the SEBI ICDR Regulations, which include companies (other than our Promoters and Subsidiaries) with which there were related party transactions as disclosed in the Restated Consolidated Financial Information and any other companies as considered material by our Board, in accordance with the Materiality Policy and as described in “Our Group Companies” on page 589 Hubballi Manufacturing Our manufacturing facilities located in Hubballi, Karnataka, India and operated through Cluster one of our Subsidiaries, namely, Aequs Consumer Products Private Limited, and one of our Joint Ventures, namely, Aequs Cookware Private Limited Independent Director(s) Independent director(s) on our Board, as described in “Our Management” on page 360 Individual Promoter Aravind Shivaputrappa Melligeri Individual Selling Collectively, Raman Subramanian, and Ravindra Mariwala Shareholder(s) Investor Selling Collectively, Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Shareholder(s) Amicus Capital Partners India Fund II, Girija Dempo Family Private Trust and Vasundhara Dempo Family Private Trust IPO Committee The IPO committee of our Board Joint Ventures The joint ventures of our Company, namely, (i) Aerospace Processing India Private Limited; (ii) SQuAD Forging India Private Limited; and (iii) Aequs Cookware Private Limited, as described in “Our Subsidiaries and Joint Ventures” on page 342 Key Managerial Personnel Key managerial personnel of our Company in terms of Regulation 2(1)(bb) of the SEBI ICDR Regulations and as described in “Our Management – Key Managerial Personnel and Senior Management – Key Managerial Personnel” on page 374 Key Performance Indicator(s) Key financial and operational performance indicators of our Company, as included in / KPI(s) “Basis for Offer Price” and “Our Business” beginning on pages 166 and 288 respectively Koppal Manufacturing Our manufacturing facilities located in Koppal, Karnataka, India and operated through Cluster certain of our subsidiaries, namely, (i) Aequs Toys Private Limited, (ii) Koppal Toys Molding COE Private Limited, and (iii) Aequs Rajas Extrusion Private Limited KTMPL Koppal Toys Molding COE Private Limited Managing Director The Managing director of our Company, as described in “Our Management” on page 360 Material Subsidiaries For the purposes of disclosure of statement of possible special tax benefits, (i) AeroStructures Manufacturing India Private Limited; (ii) Aequs Aero Machine Inc.; (iii) Aequs Aerospace France SAS; (iv) Aequs Aerospace B.V.; (v) Aequs Engineered Plastics Private Limited; and (vi) Aequs Oil & Gas LLC, are considered as material subsidiaries, in accordance with as per Regulation 16(1)(c) of the SEBI Listing Regulations, and in compliance with Paragraph 9(M) of Schedule VI of the SEBI ICDR Regulations. For further details, see “Statement of Possible Special Tax Benefits” on page 189 Further, for the purposes of disclosure of standalone financial statements of the last three financial years on our Company’s website, (i) AeroStructures Manufacturing India Private Limited; (ii) Aequs Aerospace France SAS; (iii) Aequs Oil & Gas LLC; (iv) Aequs Holdings France SAS; (v) Aequs Aero Machine Inc.; (vi) Aequs Aerospace B.V.; (vii) Aerostructures Assemblies India Private Limited; (viii) Aequs Consumer Products Private Limited; (ix) Aequs Engineered Plastics Private Limited; (x) Aequs Toys Private Limited;

(xi) Koppal Toys Molding COE Private Limited; (xii) Aequs Force Consumer Products Private Limited; (xiii) Aequs Toys Hong Kong Private Limited*; and (xiv) Aerospace Manufacturing Holdings India for the financial years ended March 31, 2025, March 31, 2024, and March 31, 2023, are considered as material subsidiaries**, determined in accordance with paragraph 11, I(A)(ii)(b) of Schedule VI of the SEBI ICDR Regulations.

For further details, see “Other Financial Information” on page 535 * The sole director of ATHPL through resolution dated July 15, 2025 has approved the process of winding up of ATHPL and appointment of liquidators in this regard.

* * (i) Bernar SAS ceased to be a subsidiary with effect from March 31, 2023; and (ii) Aequs Home Appliances Private Limited ceased to be a subsidiary (owing to being struck off from the Registrar of Companies, Karnataka at Bengaluru with effect from June 27, 2025, and consequently dissolved).

However, their audited financial statements shall be uploaded. on our Company’s website to comply with the requirements set out under paragraph 11, I(A)(ii)(b) of Schedule VI of SEBI ICDR Regulations.

3Term Description For the purpose of due diligence and disclosure of material approvals, (i) AeroStructures Manufacturing India Private Limited; (ii) Aequs Aerospace France SAS; (iii) Aequs Oil & Gas LLC; (iv) Aequs Aero Machine Inc.; (v) Aequs Aerospace BV; (vi) Aequs Consumer Products Private Limited; (vii) Aequs Engineered Plastics Private Limited; (viii) Aequs Toys Private Limited; and (ix) Aequs Force Consumer Products Private Limited, have been identified as material subsidiaries, in accordance with Regulation 16(1)(c) of the SEBI Listing Regulations and paragraph 11, I(A)(ii)(b) of Schedule VI of SEBI ICDR Regulations. For details of such material approvals, see “Government and Other Approvals” on page 586 For further details, see “Our Subsidiaries and Joint Ventures” on page 342 Materiality Policy The policy adopted by our Board pursuant to its resolution dated May 30, 2025 for identification of companies to be disclosed as group companies, material outstanding litigation, material creditors and outstanding dues to such creditors, in accordance with the requirements under the SEBI ICDR Regulations MoA/ Memorandum The memorandum of association of our Company of Association MPFF/ Melligeri Private Melligeri Private Family Foundation (acting through its trustee, MTSPL) Family Foundation MTSPL Mellwood Trustee Services Private Limited Nomination and The nomination and remuneration committee of our Board, as described in “Our Remuneration Committee Management – Board committees – Nomination and Remuneration Committee” on page 369 Non-executive Director(s) Non-executive director(s) on our Board, as described in “Our Management” on page 360 Previous Statutory Auditor The previous statutory auditors of our Company, being Price Waterhouse Chartered Accountants LLP Promoter(s) The Promoters of our Company, being, Aravind Shivaputrappa Melligeri, Aequs Manufacturing Investments Private Limited, Melligeri Private Family Foundation and The Melligeri Foundation Promoter Group The persons and entities constituting the promoter group of our Company in terms of Regulation 2(1)(pp) of the SEBI ICDR Regulations, as disclosed in “Our Promoters and Promoter Group” on page 377 Promoter Selling Collectively, Aequs Manufacturing Investments Private Limited and Melligeri Private Shareholder(s) Family Foundation Registered Office The registered office of our Company, situated at Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru, Karnataka 560 048, India Restated Consolidated The restated consolidated financial information of our Company, Aequs Stock Option Plan Financial Information Trust and our Subsidiaries, our associate and our Joint Ventures, included in this Prospectus comprise the restated consolidated statement of assets and liabilities as at six months period ended September 30, 2025 and September 30, 2024 and for the financial years ended March 31, 2025, March 31, 2024 and March 31, 2023, the restated consolidated statement of profit and loss (including other comprehensive income), the restated consolidated statement of changes in equity and the restated consolidated statement of cash flows for the six months period ended September 30, 2025 and September 30, 2024 and for the financial years financial years ended March 31, 2025, March 31, 2024 and March 31, 2023, the material accounting policies and other explanatory information and notes, and are prepared as per requirements of (a) Section 26 of Part I of Chapter III of the Companies Act 2013, (b) the SEBI ICDR Regulations and (c) the Guidance Note on Reports in Company Prospectuses (Revised 2019) issued by the ICAI, and included in “Restated Consolidated Financial Information” on page 383 Risk Management The risk management committee of our Board, as described in “Our Management – Board Committee committees – Risk Management Committee” on page 370 RoC / Registrar of Registrar of Companies, Karnataka at Bengaluru Companies RoC CPC Registrar of Companies, Central Processing Centre, Manesar Senior Management Senior management of our Company in terms of Regulation 2(1)(bbbb) of the SEBI ICDR Regulations and as described in “Our Management – Key Managerial Personnel and Senior Management – Senior Management” on page 374 Selling Shareholders Collectively, the Promoter Selling Shareholders, Investor Selling Shareholders and Individual Selling Shareholders Shareholders The holders of the Equity Shares from time to time SHA/ Shareholders’ Shareholders’ agreement dated October 12, 2023, read with supplementary letter dated Agreement October 27, 2023, amendment agreement dated February 18, 2025 and the amendment and termination agreement dated May 12, 2025, entered into by and among our Company, 4Term Description Aequs Manufacturing Investments Private Limited, Melligeri Private Family Foundation, Aravind Shivaputrappa Melligeri, Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II, Amansa Investments Limited, Catamaran Ekam (acting through its trustee, Catamaran Advisors LLP), Steadview Capital Mauritius Limited, Sparta Group LLC, Ravindra K Mariwala, Vasundhara Dempo Family Private Trust, Girija Dempo Family Private Trust, Mukul Mahavir Agrawal and certain other Shareholders SIRA Group SIRA, a simplified joint stock company, along with its direct and indirect subsidiaries SQuAD SQuAD Forging India Private Limited Stakeholders’ Relationship The stakeholders’ relationship committee of our Board, as described in “Our Management Committee – Board committees – Stakeholders’ Relationship Committee” on page 370 Step-down Subsidiaries The step-down subsidiaries of our Company, namely

(i) Aequs Aerospace LLC, USA;

(ii) Aequs Aero Machine Inc.;

(iii) Aequs Holdings France SAS;

(iv) Aequs Aerospace France SAS;

(v) Aequs Toys Hong Kong Private Limited*;

(vi) Koppal Toys Molding COE Private Limited; and

(vii) Aequs Rajas Extrusion Private Limited. * The sole director of ATHPL through resolution dated July 15, 2025 has approved the process of winding up of ATHPL and appointment of liquidators in this regard.

For further details, see “Our Subsidiaries and Joint Ventures” on page 342 Subsidiaries The subsidiaries of our Company as on the date of this Prospectus, namely as described under “Our Subsidiaries and Joint Ventures” on page 342 Texas Facility Our manufacturing facility located in Texas, U.S. and operated by our subsidiary, namely Aequs Aero Machine Inc.

TMF The Melligeri Foundation Vasundhara Dempo Family Vasundhara Dempo Family Private Trust (acting through its trustees, Shrinivas Vasudeva Private Trust Dempo and Pallavi Shrinivas Dempo) Offer Related Terms Term Description Abridged Prospectus Abridged prospectus means a memorandum containing such salient features of a prospectus as may be specified by the SEBI in this behalf Acknowledgment Slip The slip or document issued by the relevant Designated Intermediary(ies) to a Bidder as proof of registration of the Bid cum Application Form Allotment Advice The note or advice or intimation of Allotment, sent to each successful Bidder who has been or is to be Allotted the Equity Shares after approval of the Basis of Allotment by the Designated Stock Exchange Allotted/Allotment/Allot Unless the context otherwise requires, allotment of Equity Shares offered pursuant to the Fresh Issue and transfer of the Offered Shares pursuant to the Offer for Sale to successful Bidders Allottee A successful Bidder to whom the Equity Shares are Allotted Anchor Investor(s) A QIB, who applied under the Anchor Investor Portion in accordance with the requirements specified in the SEBI ICDR Regulations and the Red Herring Prospectus and who has Bid for an amount of at least ₹ 100 million Anchor Investor Allocation The final price, being ₹ 124.00 per Equity Share at which Equity Shares were allocated to the Price Anchor Investors in terms of the Red Herring Prospectus and this Prospectus. The Anchor Investor Allocation Price was determined by our Company, in consultation with the BRLMs on the Anchor Investor Bidding Date Anchor Investor Application The application form used by an Anchor Investor to make a Bid in the Anchor Investor Form Portion in accordance with the requirements specified under the SEBI ICDR Regulations and which was considered as an application for Allotment in terms of the Red Herring Prospectus and this Prospectus Anchor Investor Bidding The day, being one Working Day prior to the Bid/Offer Opening Date being Tuesday, Date December 2, 2025 on which Bids by Anchor Investors were submitted, prior to and after which BRLMs did not accept any Bids from Anchor Investors, and allocation to the Anchor Investors was completed Anchor Investor Offer Price The final price, being ₹ 124.00 per Equity Shares at which the Equity Shares will be Allotted to Anchor Investors in terms of the Red Herring Prospectus and this Prospectus, which was a 5Term Description price equal to or higher than the Offer Price but not higher than the Cap Price. The Anchor Investor Offer Price was decided by our Company, in consultation with the BRLMs Anchor Investor Pay-in Date With respect to Anchor Investor(s), it was the Anchor Investor Bidding Date Anchor Investor Portion 60% of the QIB Portion, which was allocated by our Company in consultation with the BRLMs, to Anchor Investors, on a discretionary basis, in accordance with the SEBI ICDR Regulations. One-third of the Anchor Investor Portion was reserved for domestic Mutual Funds only, subject to valid Bids having being received from domestic Mutual Funds at or above the Anchor Investor Allocation Price, in accordance with the SEBI ICDR Regulations Application Supported by An application (whether physical or electronic) by an ASBA Bidder to make a Bid authorizing Blocked Amount / ASBA the relevant SCSB to block the Bid Amount in the relevant ASBA Account and included application made by UPI Bidders using UPI Mechanism, where the Bid Amount was blocked upon acceptance of UPI Mandate Request by UPI Bidders using UPI Mechanism ASBA Account A bank account maintained with an SCSB by an ASBA Bidder, as specified in the ASBA Form submitted by ASBA Bidders for blocking the Bid Amount mentioned in the relevant ASBA Form which was blocked by such SCSB or the account maintained by a UPI Bidder linked to a UPI ID, which was blocked upon acceptance of a UPI Mandate Request made by the UPI Bidders, to the extent of the Bid Amount of the ASBA Bidders ASBA Bidders All Bidders except Anchor Investors ASBA Form An application form, whether physical or electronic, used by ASBA Bidders to submit Bids, which was considered as the application for Allotment in terms of the Red Herring Prospectus and this Prospectus Banker(s) to the Offer Collectively, the Escrow Collection Bank(s), Refund Bank(s), Public Offer Account Bank(s) and the Sponsor Bank(s), as the case may be Basis of Allotment The basis on which the Equity Shares will be Allotted to successful Bidders under the Offer, described in “Offer Procedure” on page 623 Bid(s) An indication to make an offer during the Bid/Offer Period by an ASBA Bidder pursuant to the submission of an ASBA form, or on the Anchor Investor Bidding Date by an Anchor Investor, pursuant to submission of a Bid cum Application Form, to subscribe to or purchase our Equity Shares at a price within the Price Band, including all revisions and modifications thereto, to the extent permissible under the SEBI ICDR Regulations and in terms of the Red Herring Prospectus and the Bid cum Application Form. The term ‘Bidding’ shall be construed accordingly Bid Amount The highest value of optional Bids indicated in the Bid cum Application Form and paid by the Bidder or blocked in the ASBA Account of the ASBA Bidder, as the case may be, upon submission of the Bid in the Offer, as applicable.

In the case of Retail Individual Investors Bidding at the Cut-off Price, the Bid Amount was the Cap Price multiplied by the number of Equity Shares Bid for by such Retail Individual Investor and mentioned in the Bid cum Application Form.

However, Eligible Employees applying in the Employee Reservation Portion could apply at the Cut-off Price and the Bid Amount was Cap Price net of Employee Discount multiplied by the number of Equity Shares Bid for by such Eligible Employee and mentioned in the Bid cum Application Form.

The maximum Bid Amount under the Employee Reservation Portion by an Eligible Employee did not exceed ₹ 0.50 million (net of Employee Discount). However, the initial allocation to an Eligible Employee in the Employee Reservation Portion did not exceed ₹

0.20 million (net of Employee Discount). Only in the event of an undersubscription in the Employee Reservation Portion post initial allocation, such unsubscribed portion was required to be allocated on a proportionate basis to Eligible Employees Bidding in the Employee Reservation Portion, for a value in excess of ₹ 0.20 million (net of Employee Discount) subject to the maximum value of Allotment made to an Eligible Employee not exceeding ₹

0.50 million (net of Employee Discount).

Bid cum Application Form The form in terms of which the Bidder made a Bid, including an ASBA Form and an Anchor Investor Application Form, and which was be considered as the application for the Allotment pursuant to the terms of the Red Herring Prospectus and this Prospectus Bid Lot 120 Equity Shares and in multiples of 120 Equity Shares thereafter Bid/Offer Closing Date Except in relation to any Bids received from the Anchor Investors, the date after which the Designated Intermediaries did not accept any Bid, being Friday, December 5, 2025 Bid/Offer Opening Date Except in relation to any Bids received from the Anchor Investors, the date on which the Designated Intermediaries started accepting Bids, being Wednesday, December 3, 2025 Bid/Offer Period Except in relation to any Bids received from the Anchor Investors, the period between the Bid/Offer Opening Date and the Bid/Offer Closing Date, inclusive of both days 6Term Description Bidder Any investor who made a Bid pursuant to the terms of the Red Herring Prospectus and the Bid cum Application Form and unless otherwise stated or implied, and includes an Anchor Investor Bidding Centres Centres at which the Designated Intermediaries accepted the Bid cum Application Forms, being the Designated SCSB Branches for SCSBs, Specified Locations for the Syndicate, Broker Centres for Registered Brokers, Designated RTA Locations for RTAs and Designated CDP Locations for CDPs Book Building Process The book building process as described in Part A of Schedule XIII of the SEBI ICDR Regulations, in terms of which the Offer was made Book Running Lead The book running lead managers to the Offer, in this case being JM Financial Limited, IIFL Managers / BRLMs Capital Services Limited (formerly known as IIFL Securities Limited) and Kotak Mahindra Capital Company Limited Broker Centres Broker centres of the Registered Brokers where ASBA Bidders submitted the ASBA Forms (in case of UPI Investors only ASBA Forms under UPI) to a Registered Broker. The details of such broker centres, along with the names and contact details of the Registered Brokers, are available on the respective websites of the Stock Exchanges at www.bseindia.com and www.nseindia.com, and updated from time to time Cap Price The higher end of the Price Band, i.e., ₹ 124.00 per Equity Share bearing face value of ₹ 10 each Cash Escrow and Sponsor The agreement dated November 26, 2025, entered into amongst our Company, the Selling Bank Agreement Shareholders, the Syndicate Members, the Registrar to the Offer, the BRLMs and the Banker(s) to the Offer for, among other things, appointment of the Escrow and Sponsor Bank(s), collection of the Bid Amounts from the Anchor Investors, transfer of funds to the Public Offer Account, and where applicable, remitting refunds, if any, to such Bidders, on the terms and conditions thereof Client ID Client identification number maintained with one of the Depositories in relation to the demat account Collecting Depository A depository participant, as defined under the Depositories Act, 1996 and registered under Participants / CDPs SEBI Act and who is eligible to procure Bids at the Designated CDP Locations in terms of the SEBI ICDR Master Circular and the UPI Circulars, issued by SEBI and the Stock Exchanges, as per the list available on the websites of the Stock Exchanges, www.bseindia.com and www.nseindia.com, as updated from time to time Collecting Registrar and Registrar and share transfer agents registered with SEBI and eligible to procure Bids at the Share Transfer Designated RTA Locations in terms of circular no. (CIR/CFD/POLICYCELL/11/2015) dated Agents/RTAs November 10, 2015 issued by SEBI as per the list available on the respective websites of the Stock Exchanges (www.bseindia.com and www.nseindia.com), as updated from time to time and the UPI Circulars Confirmation of Allocation Notice or intimation of allocation of the Equity Shares sent to Anchor Investors, who were Note / CAN allocated the Equity Shares, on or after the Anchor Investor Bidding Date Cut-off Price The Offer Price, finalised by our Company, in consultation with the BRLMs, being ₹ 124.00 per Equity Share bearing face value of ₹ 10 each. Only Retail Individual Investors under the Retail Portion and Eligible Employees Bidding under the Employee Reservation Portion Bidding were entitled to Bid at the Cut-off Price. QIBs (including Anchor Investors) and Non- Institutional Investors were not entitled to Bid at the Cut-off Price Demographic Details The details of the Bidders including the Bidder’s address, name of the Bidder’s father/husband, investor status, occupation, bank account details and UPI ID, as applicable Designated CDP Locations Such centres of the Collecting Depository Participants where ASBA Bidders submitted the ASBA Forms (in case of UPI Bidders only ASBA Forms under UPI). The details of such Designated CDP Locations, along with the names and contact details of the CDPs eligible to accept ASBA Forms are available on the respective websites of the Stock Exchanges (www.bseindia.com and www.nseindia.com) and updated from time to time Designated Date The date on which the funds from the Escrow Account are transferred to the Public Offer Account or the Refund Account, as appropriate, and the relevant amounts blocked in the ASBA Accounts are transferred to the Public Offer Account(s) and/or are unblocked, as applicable, in terms of the Red Herring Prospectus and this Prospectus, after finalization of the Basis of Allotment in consultation with the Designated Stock Exchange, following which the Board of Directors may Allot Equity Shares to successful Bidders in the Offer Designated Intermediaries SCSBs, Syndicate, sub-Syndicate, Registered Brokers, CDPs and RTAs who are authorised to collect ASBA Forms from the ASBA Bidders, in relation to the Offer Designated RTA Locations Such centres of the RTAs where ASBA Bidders submitted the ASBA Forms (in case of UPI Bidders, only ASBA Forms under UPI). The details of such Designated RTA Locations, along with the names and contact details of the RTAs eligible to accept ASBA Forms are available on the respective websites of the Stock Exchanges (www.bseindia.com and www.nseindia.com) and updated from time to time 7Term Description Designated SCSB Branches Such branches of the SCSBs which collected the ASBA Forms used by the Bidders, a list of which is available on the website of SEBI at www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognisedFpi=yes&intmId=35, updated from time to time, or at such other website as may be prescribed by SEBI from time to time Designated Stock Exchange NSE Eligible Employees Permanent employees of our Company or of our Corporate Promoters, or of our Subsidiaries, excluding such employees not eligible to invest in the Offer under applicable laws, rules, regulations and guidelines, as on the date of filing of the Red Herring Prospectus with the RoC and who continue to be a permanent employee of our Company or of our Corporate Promoters, or of our Subsidiaries until the submission of the ASBA Form and are based, working and present in India or abroad as on the date of submission of the ASBA Form; or Director of our Company, whether a whole-time or otherwise, who was eligible to apply under the Employee Reservation Portion under applicable law as of the date of filing of the Red Herring Prospectus with the RoC and who continued to be a Director of our Company until submission of the ASBA Form and is based, working and present in India or abroad as on the date of submission of the ASBA Form, but not including (i) Promoters; (ii) persons belonging to the Promoter Group; and (iii) Directors who either themselves or through their relatives or through any body corporate, directly or indirectly, hold more than 10% of the outstanding Equity Shares of our Company Eligible FPI(s) FPIs that were eligible to participate in this Offer in terms of applicable laws, other than individuals, corporate bodies and family offices Eligible NRI(s) A non-resident Indian, resident in a jurisdiction outside India where it is not unlawful to make an offer or invitation under the Offer and in relation to whom the Red Herring Prospectus and the Bid Cum Application Form constituted an invitation to subscribe or purchase for the Equity Shares Employee Discount Our Company, in consultation with the BRLMs, offered a discount of 8.87% of the Offer Price (equivalent to ₹ 11.00 per Equity Share) to Eligible Employee(s) Bidding in the Employee Reservation Portion, which was announced two Working Days prior to the Bid/Offer Opening Date Employee Reservation The portion of the Offer being 176,991* Equity Shares of face value of ₹ 10 each aggregating Portion up to ₹ 20.00 million which did not exceed 5% of the post Offer Equity Share capital of our Company, available for allocation to Eligible Employees, on a proportionate basis.

* Subject to finalisation of Basis of Allotment Escrow Account(s) Account(s) opened with the Escrow Collection Bank for the Offer and in whose favour the Anchor Investors transferred money through direct credit or NEFT or RTGS or NACH in respect of the Bid Amount when submitting a Bid Escrow Collection Bank A bank, which is a clearing member and registered with SEBI as a banker to an issue under the SEBI BTI Regulations and with whom the Escrow Account was opened, in this case being Kotak Mahindra Bank Limited First Bidder The Bidder whose name was mentioned first in the Bid cum Application Form or the Revision Form and in case of joint Bids, whose name appeared as the first holder of the beneficiary account held in joint names Floor Price The lower end of the Price Band being ₹ 118.00 per Equity Shares bearing face value of ₹ 10 each Fresh Issue Fresh issue of 54,047,958** Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million* by our Company *Our Company, in consultation with the BRLMs, undertook a Pre-IPO Placement, as permitted under applicable law, aggregating to ₹ 1,440.00 million. The Pre-IPO Placement was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹ 123.97 per Equity Share bearing face value ₹ 10 each, decided by our Company, in consultation with the BRLMs.

While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue, as disclosed in the UDRHP – I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue, as disclosed in the UDRHP - I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.

** Subject to finalisation of Basis of Allotment General Information The general information document for investing in public issues, prepared and issued in Document / GID accordance with the circular (SEBI/HO/CFD/DIL1/CIR/P/2020/37) dated March 17, 2020 and the SEBI ICDR Master Circular notified by SEBI and the UPI Circulars and any 8Term Description subsequent circulars or notifications issued by SEBI, as amended from time to time. The General Information Document was made available on the websites of the Stock Exchanges and the BRLMs Gross Proceeds Gross proceeds of the Fresh Issue that will be available to our Company IIFL IIFL Capital Services Limited (formerly known as IIFL Securities Limited) JM Financial JM Financial Limited Kotak Kotak Mahindra Capital Company Limited Monitoring Agency CARE Ratings Limited Monitoring Agency The agreement dated November 12, 2025, entered into between our Company and the Agreement Monitoring Agency Mutual Fund Portion 5% of the Net QIB Portion or 1,112,676* Equity Shares which was made available for allocation to Mutual Funds only, on a proportionate basis, subject to valid Bids having been received at or above the Offer Price *Subject to finalisation of Basis of Allotment Net Offer The Offer less the Employee Reservation Portion Net Pre-IPO Proceeds Gross proceeds of the Pre-IPO Placement less the Pre-IPO Placement related expenses Net Proceeds Proceeds of the Fresh Issue, i.e., Gross Proceeds less our Company’s share of the Offer expenses. For further details regarding the use of the Net Proceeds and the Offer expenses, see “Objects of the Offer” on page 147 Net QIB Portion The QIB Portion less the number of Equity Shares Allotted to Anchor Investors Non-Institutional Portion The portion of the Offer being not more than 15% of the Net Offer, or 11,126,753* Equity Shares, which was available for allocation to Non-Institutional Investors, subject to valid Bids having been received at or above the Offer Price, of which one-third was available for allocation to Bidders with an application size of more than ₹ 0.20 million and up to ₹ 1.00 million and two-thirds was available for allocation to Bidders with an application size of more than ₹ 1.00 million in accordance with the SEBI ICDR Regulations, subject to valid Bids having been received at or above the Offer Price *Subject to finalisation of Basis of Allotment Non-Institutional Investors / Bidders that were not QIBs or RIIs and who have Bid for Equity Shares for an amount more NIIs than ₹ 0.20 million (but not including NRIs other than Eligible NRIs) Offer The initial public offer of 74,355,351* Equity Shares bearing face value of ₹ 10 each for cash at a price of ₹ 124.00 per Equity Share (including a share premium of ₹ 114 per Equity Share) aggregating to ₹ 9,218.12 million* comprising the Fresh Issue and Offer for Sale *Subject to finalisation of Basis of Allotment Offer Agreement The agreement dated May 31, 2025 entered into among our Company, the Selling Shareholders and the BRLMs, based on which certain arrangements are agreed to in relation to the Offer Offer for Sale The offer for sale comprising 20,307,393* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 2,518.12 million by the Selling Shareholders. For further information, see “The Offer” on page 95 *Subject to finalisation of Basis of Allotment Offer Price ₹124.00 per Equity Share bearing face value of ₹10 each, as determined in accordance with the Book Building Process and determined by our Company, in consultation with the BRLMs, on the Pricing Day, in terms of the Red Herring Prospectus. Equity Shares will be Allotted to Anchor Investors at the Anchor Investor Offer Price in terms of the Red Herring Prospectus A discount of 8.87% on the Offer Price (equivalent of ₹ 11.00 per Equity Share) was offered to Eligible Employees Bidding in the Employee Reservation Portion. This Employee Discount was decided by our Company in consultation with the BRLMs Offered Shares The Equity Shares offered by the Selling Shareholders in the Offer by way of Offer for Sale Pre-filed Draft Red Herring The pre-filed draft red herring prospectus dated May 31, 2025 filed with SEBI and the Stock Prospectus or Pre-filed Exchanges, in accordance with Chapter IIA of the SEBI ICDR Regulations, which did not DRHP contain complete particulars of the price at which the Equity Shares will be Allotted and the size of the Offer Pre-IPO Placement Our Company, in consultation with the BRLMs, undertook a private placement of Equity Shares , as permitted under the applicable law, aggregating to ₹ 1,440.00 million, prior to filing of the Red Herring Prospectus with the RoC. The Pre-IPO Placement, was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹ 123.97 per Equity Share bearing face value ₹ 10 each, decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the 9Term Description Pre-IPO Placement was reduced from the Fresh Issue, as disclosed in the UDRHP – I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement, did not exceed 20% of the size of the Fresh Issue, as disclosed in the UDRHP - I. The utilisation of the proceeds raised pursuant to the Pre-IPO Placement was towards the Objects in compliance with applicable law. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus * Subject to finalization of Basis of Allotment Pre-IPO Proceeds Gross proceeds of the Pre-IPO Placement Price Band Price band ranging from a Floor Price of ₹ 118.00 per Equity Share bearing face value of ₹ 10 each to a Cap Price of ₹ 124.00 per Equity Share bearing face value of ₹ 10 each Pricing Date The date on which our Company in consultation with the BRLMs, finalized the Offer Price Prospectus This prospectus dated December 5, 2025 filed with the RoC in accordance with the provisions of Sections 26 and 32 of the Companies Act 2013 and the SEBI ICDR Regulations, containing the Offer Price, the size of the Offer and certain other information, including any addenda or corrigenda thereto Public Offer Account The bank account opened with the Public Offer Account Bank under Section 40(3) of the Companies Act 2013 to receive monies from the Escrow Account(s) and the ASBA Accounts on the Designated Date Public Offer Account The bank(s), which is a clearing member and registered with SEBI as a banker to an issue Bank(s) under the SEBI BTI Regulations, with whom the Public Offer Account was opened for collection of Bid Amounts from the Escrow Account(s) and ASBA Accounts on the Designated Date, in this case being HDFC Bank Limited QIB Portion The portion of the Offer, being not less than 75% of the Net Offer, or 55,633,772* Equity Shares *Subject to finalisation of Basis of Allotment Qualified Institutional A qualified institutional buyer as defined under Regulation 2(1)(ss) of the SEBI ICDR Buyers / QIBs Regulations Red Herring Prospectus / The red herring prospectus dated November 26, 2025, read with the addendum cum RHP corrigendum dated December 4, 2025 issued in accordance with Section 32 of the Companies Act 2013 and the SEBI ICDR Regulations, which did not have complete particulars of the price at which the Equity Shares were Allotted and which was filed with the RoC at least three Working Days before the Bid/Offer Opening Date Refund Account The account opened with the Refund Bank from which refunds, if any, of the whole or part of the Bid Amount shall be made to Anchor Investors Refund Bank(s) The bank(s) which is a clearing member registered with SEBI under the SEBI BTI Regulations, with whom the Refund Account was opened, in this case being Kotak Mahindra Bank Limited Registered Brokers Stock brokers registered with SEBI and the stock exchanges having nationwide terminals, other than the members of the Syndicate and eligible to procure Bids in terms of the SEBI ICDR Master Circular and the UPI Circulars, issued by SEBI Registrar Agreement The agreement dated May 31, 2025 entered into among our Company, the Selling Shareholders and the Registrar to the Offer in relation to the responsibilities and obligations of the Registrar to the Offer pertaining to the Offer Registrar to the Offer KFin Technologies Limited Retail Portion The portion of the Offer, being not more than 10% of the Net Offer, or 7,417,835 Equity Shares, which was made available for allocation to Retail Individual Investors in accordance with the SEBI ICDR Regulations, subject to valid Bids having been received at or above the Offer Price *Subject to finalisation of Basis of Allotment Retail Individual Investors / Individual Bidders, whose Bid Amount for Equity Shares in the Offer was not more than ₹ RIIs 0.20 million in any of the bidding options in the Offer (including HUFs who applied through their karta and Eligible NRIs and did include NRIs other than Eligible NRIs) Revision Form The form used by the Bidders to modify the quantity of Equity Shares or the Bid Amount in any of their Bid cum Application Forms or any previous Revision Form(s), as applicable.

QIBs Bidding in the QIB Portion and Non-Institutional Investors Bidding in the Non- Institutional Portion were not permitted to withdraw their Bid(s) or lower the size of their 10Term Description Bid(s) (in terms of quantity of Equity Shares or the Bid Amount) at any stage. Retail Individual Investors and Eligible Employees Bidding in the Employee Reservation Portion could revise their Bids during Bid/Offer period and withdraw their Bids until Bid/Offer Closing Date SCORES Securities and Exchange Board of India Complaints Redress System Self-Certified Syndicate The banks registered with SEBI, offering services in relation to ASBA (other than through Banks / SCSBs UPI Mechanism), a list of which is available on the website of SEBI at www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognisedFpi=yes&intmId=34 or www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognisedFpi=yes&intmId=35, as applicable, or such other website as updated from time to time, and (i) the banks registered with SEBI, enabled for UPI Mechanism, a list of which is available on the website of SEBI at www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognisedFpi=yes&intmId=40, or such other website as updated from time to time In relation to Bids (other than Bids by Anchor Investor) submitted to a member of the Syndicate, the list of branches of the SCSBs at the Specified Locations named by the respective SCSBs to receive deposits of Bid cum Application Forms from the members of the Syndicate is available on the website of the SEBI (https://www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognisedFpi=yes&intmId=35) and updated from time to time. For more information on such branches collecting Bid cum Application Forms from the Syndicate at Specified Locations, see the website of the SEBI at

https://www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognisedFpi=yes&intmId=35 as updated from time to time Applications through UPI in the Offer could be made only through the SCSBs mobile applications (apps) whose name appears on SEBI website. A list of SCSBs and mobile application, which, are live for applying in public issues using UPI Mechanism is appearing in the “list of mobile applications for using UPI in public issues” displayed on SEBI website at www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognisedFpi=yes&intmId=43. The said list shall be updated on the SEBI website.

Share Escrow Agent Escrow agent appointed pursuant to the Share Escrow Agreement, in this case being KFin Technologies Limited Share Escrow Agreement Agreement dated November 24, 2025, entered into among the Selling Shareholders, our Company and the Share Escrow Agent in connection with the transfer of the portion of Equity Shares being offered by the Selling Shareholders in the Offer for Sale portion of the Offer and credit of such Equity Shares to the demat account of the Allottees Specified Locations Bidding Centres where the Syndicate accepted Bid cum Application Forms, a list of which were included in the Bid cum Application Form Sponsor Bank(s) The Banker(s) to the Offer registered with SEBI, which have been appointed by our Company to act as a conduit between the Stock Exchanges and NPCI in order to push the UPI Mandate Request by a UPI Bidder in accordance with the UPI Mechanism and carry out other responsibilities, in terms of the UPI Circulars, in this case being HDFC Bank Limited, and Kotak Mahindra Bank Limited Stock Exchanges Together, BSE and NSE Sub-Syndicate Members The sub-syndicate members, if any, appointed by the BRLMs and the Syndicate Members, to collect ASBA Forms and Revision Forms Syndicate Agreement Agreement dated November 26, 2025, entered into among the members of the Syndicate, our Company, the Selling Shareholders and the Registrar to the Offer in relation to the collection of Bid cum Application Forms by the Syndicate Syndicate Members Intermediaries registered with SEBI and permitted to carry out activities as an underwriter, in this case being JM Financial Services Limited and Kotak Securities Limited Syndicate or members of the Together, the BRLMs and the Syndicate Members Syndicate Underwriters Collectively, the BRLMs, JM Financial Services Limited and Kotak Securities Limited Underwriting Agreement The agreement dated December 5, 2025 entered into among our Company, the Selling Shareholders, the Registrar to the Offer and the Underwriters Updated Draft Red Herring The updated draft red herring prospectus-I dated September 30, 2025 filed with SEBI and the Prospectus-I or UDRHP–I Stock Exchanges, after complying with the observations issued by SEBI and Stock Exchanges on the Pre-filed Draft Red Herring Prospectus and after incorporation of other updates, in accordance with the Chapter IIA of the SEBI ICDR Regulations and in compliance with the other applicable provisions of the SEBI ICDR Regulations, which did not contain complete particulars of the price at which the Equity Shares will be Allotted and the size of the Offer UPI Unified Payments Interface which is an instant payment mechanism, developed by NPCI UPI Bidders Collectively, individual investors who applied as Retail Individual Investors in the Retail Portion, and individuals who applied as Non-Institutional Investors with a Bid Amount of up 11Term Description to ₹ 0.50 million in the Non-Institutional Portion and Eligible Employees who applied in the Employee Reservation Portion and with an application size of up to ₹ 0.50 million (net of Employee Discount) and Bidding under the UPI Mechanism through ASBA Form(s) submitted with Syndicate Members, Registered Brokers, Collecting Depository Participants and Registrar and Share Transfer Agents.

Pursuant to the SEBI ICDR Master Circular, all individual investors applying in public issues where the application amount is up to ₹ 0.50 million shall use UPI and shall provide their UPI ID in the bid-cum-application form submitted with: (i) a syndicate member, (ii) a stock broker registered with a recognized stock exchange (whose name is mentioned on the website of the stock exchange as eligible for such activity), (iii) a depository participant (whose name is mentioned on the website of the stock exchange as eligible for such activity), and (iv) a registrar to an issue and share transfer agent (whose name is mentioned on the website of the stock exchange as eligible for such activity) UPI Circulars SEBI circular no. SEBI/HO/CFD/DIL2/CIR/P/2019/85 dated July 26, 2019, SEBI RTA Master Circular (to the extent it pertains to UPI), SEBI ICDR Master Circular, along with the circulars issued by NSE having reference no. 25/2022 dated August 3, 2022 and the circular issued by BSE having reference no. 20220803-40 dated August 3, 2022 and any subsequent circulars or notifications issued by SEBI in this regard UPI ID ID created on the UPI for single-window mobile payment system developed by the NPCI UPI Mandate Request A request (intimating the UPI Bidders, by way of a notification on the UPI linked mobile application and by way of an SMS directing the UPI Bidders to such UPI linked mobile application) to the UPI Bidders initiated by the Sponsor Bank(s) to authorize blocking of funds equivalent to the Bid Amount in the relevant ASBA Account through the UPI linked mobile application, and the subsequent debit of funds in case of Allotment UPI Mechanism The Bidding mechanism used by UPI Bidders to make Bids in the Offer in accordance with the UPI Circulars UPI PIN Password to authenticate UPI transaction Working Day(s) All days on which commercial banks in Mumbai, Maharashtra, India are open for business,

provided however, for the purpose of announcement of the Price Band and the Bid/Offer Period, “Working Day” shall mean all days, excluding all Saturdays, Sundays and public holidays on which commercial banks in Mumbai, Maharashtra, India are open for business and the time period between the Bid/Offer Closing Date and listing of the Equity Shares on the Stock Exchanges, “Working Day” shall mean all trading days of the Stock Exchanges excluding Sundays and bank holidays in India, as per the circulars issued by SEBI from time to time Conventional and General Terms and Abbreviations Term Description Air Act The Air (Prevention and Control of Pollution) Act, 1981 AGM Annual general meeting of shareholders under the Companies Act 2013 AIF(s) Alternative Investment Funds as defined in and registered with SEBI under the SEBI AIF Regulations ASM Additional surveillance measures BIS Bureau of Indian Standards Bn/bn Billion BPS Basis points BSE BSE Limited CAGR Compounded Annual Growth Rate CDSL Central Depository Services (India) Limited CIN Corporate Identity Number Client ID Client identification number of the Bidder’s beneficiary account Companies Act 1956 The erstwhile Companies Act, 1956 read with the rules, regulations, clarifications and modifications thereunder Companies Act 2013 The Companies Act, 2013 read with rules, regulations, clarifications and modifications thereunder Competition Act The Competition Act, 2002 Consolidated FDI Policy The Consolidated FDI Policy, effective from October 15, 2020, issued by the DPIIT, and any modifications thereto or substitutions thereof, issued from time to time Consumer Protection Act The Consumer Protection Act, 2019 Copyright Act The Copyright Act, 1957 CPC The Code of Civil Procedure, 1908 CSR Corporate social responsibility 12Term Description Data Protection Act The Digital Personal Data Protection Act, 2023 Depositories Act The Depositories Act, 1996, read with the rules, regulations, clarifications and modifications thereunder Depository A depository registered with the SEBI under the Securities and Exchange Board of India (Depositories and Participants) Regulations, 1996 DIN Director Identification Number DP ID Depository Participant’s identity number DP/Depository Participant A depository participant as defined under the Depositories Act DPIIT Department for Promotion of Industry and Internal Trade, Ministry of Commerce and Industry (formerly Department of Industrial Policy and Promotion), GoI EGM Extra-ordinary general meeting EP Act The Environment (Protection) Act, 1986 EPF Act Employees Provident Funds and Miscellaneous Provisions Act, 1952 EP Rules The Environment (Protection) Rules, 1986 EPC Export packing credit EPS Earnings per share ESI Act The Employees’ State Insurance Act, 1948 ESIC Employees’ State Insurance Corporation ESG Environmental, Social and Governance FCNR Account Foreign Currency Non Resident (Bank) account established in accordance with the provisions of FEMA FDI Foreign direct investment FEMA The Foreign Exchange Management Act, 1999 read with rules and regulations thereunder FEMA Rules The Foreign Exchange Management (Non-debt Instruments) Rules, 2019 Financial Year/Fiscal/Fiscal The period of 12 months commencing on April 1 of the immediately preceding calendar Year year and ending on March 31 of that particular calendar year FIR First information report FPIs Foreign portfolio investor registered with SEBI pursuant to the SEBI FPI Regulations Fraudulent Borrower Fraudulent borrower as defined under Regulation 2(1)(lll) of the SEBI ICDR Regulations FTA The Foreign Trade (Development and Regulation) Act, 1992 Fugitive Economic Offender An individual who is declared a fugitive economic offender under section 12 of the Fugitive Economic Offenders Act, 2018 FVCI Foreign venture capital investors registered with SEBI pursuant to the SEBI FVCI Regulations GDP Gross Domestic Product GoI/ Central Government/ The Government of India Indian Government GSM Graded surveillance measures GST Goods and services tax HUF(s) Hindu undivided family(ies) ICAI Institute of Chartered Accountants of India ICAI Guidance Note on Guidance Note on Reports in Company Prospectuses (Revised 2019) issued by the Institute Company Prospectus of Chartered Accountants of India IFRS The International Financial Reporting Standards issued by the International Accounting Standards Board Income Tax Act Income-tax Act, 1961 Ind AS The Indian Accounting Standards as specified under Section 133 of the Companies Act 2013 read with Companies (Indian Accounting Standards) Rules, 2015, as amended Ind AS 24 The Indian Accounting Standard 24, “Related Party Disclosures”, notified under Section 133 of the Companies Act 2013 read with Companies (Indian Accounting Standards) Rules, 2015, as amended Ind AS Rules The Companies (Indian Accounting Standards) Rules, 2015, as amended INR / Indian Rupees / Rupee / Indian Rupee, the official currency of the Republic of India ₹ / Rs.

IPO Initial public offering IST Indian Standard Time IT Act The Information Technology Act, 2000 IT Intermediary Rules The Information Technology (Intermediaries Guidelines and Digital Media Ethics Code) Rules, 2021 IT Security Rules The Information Technology (Reasonable Security Practices and Procedures and Sensitive Personal Data or Information) Rules, 2011 LM Act The Legal Metrology Act, 2009 MCA The Ministry of Corporate Affairs, Government of India MSME Micro, small or a medium enterprise 13Term Description Mutual Funds Mutual funds registered with the SEBI under the Securities and Exchange Board of India (Mutual Funds) Regulations, 1996 N.A. / NA Not applicable NACH National Automated Clearing House Net Asset Value per Equity Net asset value per Equity Share represents net worth as at the end of the year/period divided Share by weighted average number of Equity Shares considered for calculating basic and diluted EPS for the year. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535 Net Worth Net Worth, as per Regulation 2(1)(hh) of the SEBI ICDR Regulations, means the aggregate value of the paid-up share capital and all reserves created out of the profits and securities premium account and debit or credit balance of profit and loss account, after deducting the aggregate value of the accumulated losses, deferred expenditure and miscellaneous expenditure not written off, as per the restated statement of assets and liabilities, but does not include reserves created out of revaluation of assets, write-back of depreciation and amalgamation. Further, Net Worth is calculated by deducting the revaluation reserve and common control capital reserve from the equity attributable to owners of the Company.

Equity attributable to owners of the Company comprises of equity share capital, instruments entirely equity in nature and other equity. For details in relation to reconciliation of Non- GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535 NBFC-SI Systemically important non-banking financial company NCBs Non-convertible bonds Non-GAAP Non-generally accepted accounting principles NR/Non-Resident A person resident outside India, as defined under the FEMA and includes an NRI NRE Non-Resident External NRI Non-Resident Indian as defined under the Foreign Exchange Management (Non-Debt Instruments) Rules, 2019 NRO Non-Resident Ordinary NSDL National Securities Depository Limited NSE National Stock Exchange of India Limited OCB / Overseas Corporate A company, partnership, society or other corporate body owned directly or indirectly to the Body extent of at least 60% by NRIs including overseas trusts, in which not less than 60% of beneficial interest is irrevocably held by NRIs directly or indirectly and which was in existence on October 3, 2003 and immediately before such date had taken benefits under the general permission granted to OCBs under FEMA. OCBs are not allowed to invest in the Offer p.a. Per annum PAN Permanent account number PAT Profit after tax PCFC Pre-shipment credit in foreign currency PEC Precision engineering component P/E Ratio Price/Earnings Ratio RBI Reserve Bank of India Regulation S Regulation S under the U.S. Securities Act Relative(s) Such persons, as defined under Section 2(77) of the Companies Act 2013 Return on Net Worth/ RoNW Loss for the year divided by the net worth as at the end of the year/period. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535 RPC Running pre shipment credit RPCFC Running pre shipment credit in foreign currency RTGS Real Time Gross Settlement

Rule 144A Rule 144A under the U.S. Securities Act SAARC South Asian Association for Regional Cooperation SCRA The Securities Contracts (Regulation) Act, 1956 SCRR The Securities Contracts (Regulation) Rules, 1957 SEBI The Securities and Exchange Board of India constituted under section 3 of the SEBI Act SEBI Act The Securities and Exchange Board of India Act, 1992 SEBI AIF Regulations The Securities and Exchange Board of India (Alternative Investment Funds) Regulations, 2012 SEBI BTI Regulations The Securities and Exchange Board of India (Bankers to an Issue) Regulations, 1994 SEBI FPI Regulations The Securities and Exchange Board of India (Foreign Portfolio Investors) Regulations, 2019 14Term Description SEBI FVCI Regulations The Securities and Exchange Board of India (Foreign Venture Capital Investor) Regulations, 2000 SEBI ICDR Regulations The Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended SEBI Listing Regulations The Securities and Exchange Board of India (Listing Obligations and Disclosure Requirements) Regulations, 2015, as amended SEBI Merchant Bankers The Securities and Exchange Board of India (Merchant Bankers) Regulations, 1992 Regulations SEBI RTA Master Circular SEBI master circular bearing number SEBI/HO/MIRSD/MIRSD/PoD/P/CIR/2025/91 dated June 23, 2025, to the extent it pertains to UPI SEBI ICDR Master Circular SEBI master circular no. SEBI/HO/CFD/PoD-1/P/CIR/2024/0154 dated November 11, 2024 SEBI SBEB & SE The Securities and Exchange Board of India (Share Based Employee Benefits and Sweat Regulations Equity) Regulations, 2021 SEBI Takeover Regulations The Securities and Exchange Board of India (Substantial Acquisition of Shares and Takeovers) Regulations, 2011 SOFR Secured overnight financing rate Stock Exchanges BSE Limited and National Stock Exchange of India Limited STT Securities Transaction Tax Trademark Act The Trade Marks Act, 1999 Trademark Amendment Act The Trade Marks (Amendment) Act, 2010 UAE/ United Arab Emirates United Arab Emirates U.S. GAAP Generally Accepted Accounting Principles in the United State of America U.S. Securities Act The U.S. Securities Act of 1933, as amended US$ / USD / US Dollar United States Dollar, the official currency of the United States of America USA / U.S. / US The United States of America VCF Venture capital funds as defined in and registered with the SEBI under the erstwhile Securities and Exchange Board of India (Venture Capital Fund) Regulations, 1996 or the SEBI AIF Regulations, as the case may be Wilful Defaulter Wilful Defaulter as defined under Regulation 2(1)(lll) of the SEBI ICDR Regulations Technical and Industry Related Terms Term Description ABS Acrylonitrile butadiene styrene is a durable plastic commonly used to make consumer goods, automotive and electronic parts BD Business development BTP Build-to-Print refers to a manufacturing approach where a supplier manufactures parts, assemblies, or products strictly according to detailed specifications, drawings, and requirements provided by the customer, without being involved in the design process CMM Coordinate measuring machines are devices used to measure the physical geometrical characteristics of an object CNC Computer numerical control is a manufacturing process in which pre-programmed computer software dictates the movement of tools and machinery CSR Corporate social responsibility ETP Effluent treatment plants FMS Flexible manufacturing system is an automated production system that can adapt to changes in the type and quantity of products being manufactured, allowing for customization and responsiveness to market demand HDPE High-density poly ethylene is a durable and versatile thermoplastic polymer made from petroleum, commonly used in the production of containers, pipes, and industrial packaging due to its high strength-to-density ratio and resistance to impact and chemicals ISO International Organization for Standardization LEAP Leading edge aviation propulsion refers to advanced propulsion technologies and systems that enhance the efficiency, performance, and sustainability of modern aircraft engines M&C Marketing and communications MSA Master service agreement NADCAP National Aerospace and Defense Contractors Accredited Program OEM Original equipment manufacturer is an entity that manufactures parts or products that are used in another entity's end product PAT Profit after tax PDU Power distribution unit PLI Production linked incentive PP Polypropylene is a type of plastic that is lightweight, durable, and commonly used to make 15Term Description products like food containers, toys, and car parts PPE Polyphenylene ether is a thermoplastic polymer known for its dimensional stability, heat resistance, and mechanical strength, commonly used in engineering applications such as electrical components and automotive parts PVC Polyvinyl chloride is a type of plastic commonly used to make pipes, cables, and packaging materials due to its durability and resistance to moisture and chemicals RPM Revolutions per minute SEZ Special economic zone SKU A stock keeping unit refers to an individual unit of stock in our inventory, and is the unit of measure in which our stocks are managed.

SPECS Scheme for Promotion of Electronic Components and Semiconductors STP Sewage treatment plants Key Performance Indicators (“KPIs”) (as identified in “Basis for Offer Price” beginning on page 166) Term Description Capacity utilization Actual production (in machining hours) as a percentage of installed capacity (in machining/ molding hours) Cash Conversion Cycle Days Trade receivable days plus inventory days minus trade payable days.

Trade receivable days is calculated as trade receivable for the particular period/ Fiscal divided by Revenue from Operations multiplied by 183/ 365 days.

Inventory days is calculated as inventory at the end of period/ Fiscal divided by raw material consumed plus purchases of stock-in-trade plus changes in inventories of finished goods and work-in-progress during the particular period/ Fiscal multiplied by 183/ 365 days.

Trade payable days is calculated as trade payable outstanding at the end of period/ Fiscal divided by purchase of raw materials plus purchases of stock-in-trade during the period/ Fiscal multiplied by 183/ 365 days Consolidated Installed Installed capacity (in machining/ molding hours) is the capacity available at the Capacity (in machining/ manufacturing facilities of the Company and its Subsidiaries at the end of the given molding hours) year/period EBITDA Loss for the year as per restated consolidated statement of profit and loss plus (i) Total tax expenses; (ii) finance costs; and (iii) depreciation and amortisation expense adjusted for (iv) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; (v) exceptional items gain/(loss); and (vi) (Loss) / profit from discontinued operations before tax. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535 EBITDA Margin EBITDA Margin is calculated as EBITDA as a percentage of revenue from operations. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535 EBITDA - Aerospace Profit / (Loss) before tax for the year for Aerospace Segment plus (i) finance costs; and (ii) Segment depreciation and amortisation expense adjusted for (iii) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; and (iv) Exceptional items gain/(loss) of the Aerospace Segment as per the segment reporting in the Restated Consolidated Financial Information. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535 EBITDA - Aerospace EBITDA - Aerospace Segment as a percentage of net external revenue of the Aerospace Segment Margin % Segment as per the segment reporting in the Restated Consolidated Financial Information.

For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535 EBITDA - Consumer Segment Profit / (Loss) for the year before tax for Consumer Segment plus (i) finance costs; and (ii) depreciation and amortisation expense adjusted for (iii) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; and (iv) exceptional items gain/(loss); of the Consumer Segment as per the segment reporting in the Restated Consolidated Financial Information. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535 EBITDA - Consumer Segment EBITDA - Consumer Segment as a percentage of net external revenue of the Consumer Margin % Segment as per the segment reporting in the Restated Consolidated Financial Information.

16Term Description For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535 Fixed Asset Turnover Revenue from Operations divided by total fixed assets. Total fixed assets comprises property, plant and equipment and right of use assets Loss for the year Loss for the year as traced from the Restated Consolidated Financial Information PAT margin Loss for the year divided by Revenue from Operations during the Fiscal/period multiplied by 100. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non- GAAP Measures” on page 535 Net Debt to Equity Ratio Net debt divided by total equity.

Net debt is calculated as non-current borrowings plus current borrowings plus non-current lease liabilities plus current lease liabilities plus CCPS classified as non-current borrowings less cash and cash equivalents less bank balances other than cash and cash equivalent Net external revenue – Revenue from operations from the Aerospace Segment as traced from the Restated Aerospace Segment Consolidated Financial Information Net external revenue – Revenue from operations from the Consumer Segment as traced from the Restated Consumer Segment Consolidated Financial Information Revenue from Operations Revenue from operations as traced from the Restated Consolidated Financial Information Return on Capital Employed Earnings before interest and tax as a percentage of capital employed. Earnings before interest and tax is calculated as loss before tax from continuing operations as adjusted to exceptional items gain/ (loss), and finance costs. Capital employed is the sum of total equity, non-current and current borrowings and non-current and current lease liabilities Return on Equity Loss from continuing operations as a percentage of Total Equity as per the Restated Consolidated Financial Information Year on Year growth in Year-on-year growth in Revenue from Operations is calculated as Revenue from Operations Revenue from Operations during the relevant Fiscal less the Revenue from Operations during the previous Fiscal) divided by Revenue from Operations during the previous Fiscal) Total Assets Total assets as traced from the Restated Consolidated Financial Information 17SUMMARY OF THE OFFER DOCUMENT The following is a general summary of the terms of the Offer and certain disclosures included in this Prospectus and is not exhaustive, nor does it purport to contain a summary of all the disclosures in this Prospectus or all details relevant to the investors. This summary should be read in conjunction with, and is qualified in its entirety by, the more detailed information appearing elsewhere in this Prospectus, including the sections titled “Risk Factors”, “The Offer”, “Capital Structure”, “Objects of the Offer”, “Industry Overview”, “Our Business”, “Our Promoters and Promoter Group”, “Restated Consolidated Financial Information”, “Management’s Discussion and Analysis of Financial Condition and Results of Operations”, “Outstanding Litigation and Other Material Developments”, “Offer Procedure” and “Main Provisions of the Articles of Association” on pages 37, 95, 115, 147, 219, 288, 377, 383, 539, 581, 623 and 646, respectively.

Summary of our primary business We are a vertically integrated precision component manufacturer with manufacturing capabilities in the Aerospace Segment and Consumer Segment. We operate units in three engineering-led vertically-integrated precision manufacturing ecosystems, which enable us to produce complex products for our global OEM customers across the aerospace and consumer sectors. Our advanced manufacturing capabilities enable us to enter into new business segments by leveraging existing capabilities across existing business segments. Our product portfolio comprises components for engine systems, landing systems, cargo and interiors, structures, assemblies and turnings for our aerospace clients; and consumer electronics, plastics and consumer durables for our consumer clients.

For further information, see “Our Business” beginning on page 288.

Summary of the industry in which we operate India’s precision manufacturing sector is rapidly expanding, driven by advancements in technology and increasing demand across industries such as automotive, aerospace, and electronics (Source: F&S Report, see “Industry Overview”, para 1 on page 267). A combination of factors such as manufacturing-led government initiatives, strong domestic demand, integration into global value chains (China +1) and cost competitiveness and availability of skilled labour favourably position India within the global precision manufacturing landscape (Source: F&S Report, see “Industry Overview”, para 1 on page 267). The Aerospace Segment value chain involves several critical stages, each influencing cost and quality (Source: F&S Report, see “Industry Overview”, para 8 on page

235). The growth in global consumer electronics market which includes products such as laptops, tablets and wearable devices, is driven by technological advancements and shifting consumer trends (Source: F&S Report, see “Industry Overview”, para 3 on page 252).

For further information, see “Industry Overview” beginning on page 219.

Promoters Our Promoters are Aravind Shivaputrappa Melligeri, Aequs Manufacturing Investments Private Limited, Melligeri Private Family Foundation and The Melligeri Foundation. For details, see “Our Promoters and Promoter Group” on page 377.

Offer size

The following table summarizes the details of the Offer:

Offer(1) 74,355,351* Equity Shares bearing face value of ₹ 10 each for cash at a price of ₹

124.00 per Equity Share aggregating to ₹ 9,218.12 million

Of which:

Fresh Issue(1)(2) 54,047,958* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million Offer for Sale(3) 20,307,393* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 2,518.12 million by the Selling Shareholders

The Offer consists of:

Employee Reservation Portion(4) 176,991 Equity Shares bearing face value of ₹ 10 each, aggregating to ₹ 20.00 million Net Offer 74,178,360 Equity Shares bearing face value of ₹ 10 each, aggregating to ₹ 9,198.12 million *Subject to finalisation of Basis of Allotment 18(1) The Offer has been authorised by our Board pursuant to its resolution dated May 10, 2025, and the Fresh Issue has been authorized by our Shareholders pursuant to a special resolution dated May 13, 2025. For details of the consent of the Selling Shareholders in relation to the Offer for Sale, see “The Offer” and “Other Regulatory and Statutory Disclosures” beginning on pages 95 and 591, respectively.

(2) Our Company, in consultation with the BRLMs, undertook a pre-IPO Placement, as permitted under applicable law, aggregating to ₹ 1,440.00 million. The Pre-IPO Placement, was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹

123.97 per Equity Share bearing face value ₹ 10 each, decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue, as disclosed in the UDRHP – I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue, as disclosed in the UDRHP – I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.

(3) The Equity Shares being offered by the Selling Shareholders are eligible for being offered for sale pursuant to the Offer in terms of Regulation 8 and Regulation 8A of the SEBI ICDR Regulations. For details of authorisation received from the Selling Shareholders for the Offer for Sale, see “Other Regulatory and Statutory Disclosures – Authority for the Offer – Approvals from the Selling Shareholders” on page 591.

(4) Eligible Employees who Bid in the Employee Reservation Portion ensured that the maximum Bid Amount did not exceed ₹ 0.50 million (net of Employee Discount). The initial allocation to an Eligible Employee in the Employee Reservation Portion did not exceed ₹ 0.20 million (net of Employee Discount). In the event of under-subscription in the Employee Reservation Portion (if any), the unsubscribed portion was required to made available for allocation and Allotment, proportionately to all Eligible Employees who have Bid in excess of ₹ 0.20 million (net of Employee Discount), subject to the maximum value of Allotment made to such Eligible Employee not exceeding ₹ 0.50 million (net of Employee Discount). The unsubscribed portion, if any, in the Employee Reservation Portion after allocation of up to ₹ 0.50 million (net of Employee Discount), was added to the Net Offer. Further, an Eligible Employee Bidding in the Employee Reservation Portion could also Bid in the Net Offer and such Bids were not treated as multiple Bids subject to applicable limits. Our Company, in consultation with the BRLMs, offered a discount of 8.87% on the Offer Price (equivalent of ₹ 11.00 per Equity Share) to Eligible Employees Bidding in the Employee Reservation Portion which was announced two Working Days prior to the Bid/Offer Opening Date. For further details, see “Offer Procedure” and “Offer Structure” on pages 623 and 616, respectively.

The Offer and Net Offer constituted 11.09% and 11.06% of the post-Offer paid-up Equity Share capital of our Company, respectively. For further details, see “The Offer” and “Offer Structure” on pages 95 and 616, respectively.

Objects of the Offer Our Company proposes to utilise the Net Proceeds and Net Pre-IPO Proceeds towards funding the objects set forth

below: (in ₹ million) S. Particulars Total estimated Amount utilised by Amount pending No. amount/ the Company from utilisation by the expenditure to be the Net Pre-IPO Company from the funded from the Proceeds Net Pre-IPO Net Proceeds Proceeds

1. Repayment/ prepayment in full or in part, - of certain outstanding borrowings and 4,331.67 202.54@ prepayment penalties, as applicable,

availed by:

(a) our Company 175.52 70.00 -

(b) three of our wholly-owned - Subsidiaries, ASMIPL, ACPPL, and 4,156.15 132.54 AEPPL through investment in such Subsidiaries

2. Funding capital expenditure to be incurred - on account of purchase of machinery and 640.02 166.42@

equipment by:

(a) our Company 81.14 - -

(b) one of our wholly-owned Subsidiaries, - ASMIPL, through investment in such 558.88 166.42 Subsidiary

3. Funding inorganic growth through 1,252.09 750.00& 288.64 unidentified acquisitions, other strategic initiatives and general corporate purposes*#^ Net Proceeds*^ 6,223.78 1,118.96 288.64 * The cumulative amount to be utilized towards inorganic growth through unidentified acquisitions, other strategic initiatives and general corporate purposes shall not exceed 35% of the Gross Proceeds (including the Pre-IPO Proceeds). The amount utilised for general corporate purposes shall not exceed 25% of the Gross Proceeds (including the Pre-IPO Proceeds). Further, the amount utilized for funding inorganic 19growth alone through unidentified acquisitions and other strategic initiatives shall not exceed 25% of the Gross Proceeds (including Pre-IPO Proceeds).

&The utilization of the Net Pre-IPO Proceeds towards general corporate purposes which comprises investments in certain of our Subsidiaries through loans amounting to ₹ 640.00 million and investment in equity share capital amounting to ₹ 110.00 million, for meeting our operational and other business requirements, have been certified by Manian & Rao, Chartered Accountants (FRN No. 001983S), by way of their certificate dated November 26, 2025.

^ Our Company, in consultation with the BRLMs, undertook a Pre-IPO Placement, as permitted under applicable law, aggregating to ₹ 1,440.00 million. The Pre-IPO Placement, was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹ 123.97 per Equity Share bearing face value of ₹ 10 each, as decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue as disclosed in the UDRHP I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue as disclosed in the UDRHP - I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.

#The aggregate proceeds of the Pre-IPO Placement and the Fresh Issue is ₹ 8,140.00 million and the Offer expenses apportioned to our Company is ₹ 476.22 million and the expenses for the Pre-IPO Placement is ₹ 32.40 million. Accordingly, the aggregate of the Net Proceeds and the Net Pre-IPO Proceeds is ₹ 7,631.38 million. For details with respect to the fees and expenses related to the Offer, please refer to “Objects of the Offer - Offer related expenses” on page 162. The Net Pre-IPO Proceeds have been utilised towards the Objects in the manner shown above.

@ As certified by our Statutory Auditors by way of their certificate dated November 26, 2025.

For further details, see “Objects of the Offer” on page 147.

Aggregate pre-Offer Shareholding of our Promoters, members of the Promoter Group and Selling Shareholders Except as disclosed below, our Promoters, members of the Promoter Group and Selling Shareholders, do not hold

any Equity Shares in our Company:

Name Pre-Offer no. of Equity Pre-Offer % of Equity Shares of face value of ₹ Share capital 10 each held* Promoters Aravind Shivaputrappa Melligeri 1,000,000 0.16 Aequs Manufacturing Investments Private Limited^ 290,808,225 47.16 Melligeri Private Family Foundation^ 101,761,570 16.50 Sub-total (A) 393,569,795 63.82 Promoter Group Jagadish Shivaputrappa Melligeri 1,000,000 0.16 Babasaheb Appanna Patil 370,843 0.06 Basavant Appanna Patil 228,739 0.04 Mayflower Investments LLC 1,397,325 0.23 Akkamahadevi Melligeri 798,072 0.13 Leela B Naikar 78,273 0.01 Vijaya Sugandhi 78,273 0.01 Venkatesh Shivaputrappa Melligeri 110,000 0.02 Sub-total (B) 4,061,525 0.66 Selling Shareholders Amicus Capital Private Equity I LLP 12,418,403 2.01 Amicus Capital Partners India Fund I 1,252,230 0.20 Amicus Capital Partners India Fund II 21,793,063 3.53 Vasundhara Dempo Family Private Trust 1,069,185 0.17 Girija Dempo Family Private Trust 1,069,185 0.17 Raman Subramanian 300,000 0.05 Ravindra Mariwala 2,138,362 0.35 Sub-total (C) 40,040,428 6.48 Total 437,671,748 70.96 ^ Also participating in the Offer as Promoter Selling Shareholders.

One of our Corporate Promoters, The Melligeri Foundation does not hold any Equity Shares in our Company. For further details, see “Capital Structure” beginning on page 115.

Shareholding of our Promoters, members of the Promoter Group and top 10 Shareholders of the Company 20The aggregate pre-Offer and post-Offer shareholding, of each of our Promoters, members of the Promoter Group and additional top 10 Shareholders (apart from our Promoters) is set forth below:

Shareholders Pre-Offer shareholding as on the date Post-Offer shareholding as at Allotment* of the Price Band advertisement No. of Equity % of pre-Offer At the lower end of the Price At the upper end of the Price Band Shares of face Equity Share Band (₹118) (₹124) value of ₹ 10 capital No. of Equity Post-Offer No. of Equity Post-Offer each Shares of face Shareholding Shares of face Shareholding (%) value of ₹ 10 (%) value of ₹ 10 each each Promoters Aravind 1,000,000 0.16% 1,000,000 0.15% 1,000,000 0.15% Shivaputrappa Melligeri** Aequs 290,808,225 47.16% 290,708,225 43.17% 290,708,225 43.35% Manufacturing Investments Private Limited Melligeri 101,761,570 16.50% 100,438,070 14.91% 100,438,070 14.98% Private Family Foundation** Promoter Group Jagadish 1,000,000 0.16% 1,000,000 0.15% 1,000,000 0.15% Shivaputrappa Melligeri Babasaheb 370,843 0.06% 370,843 0.06% 370,843 0.06% Appanna Patil Basavant 228,739 0.04% 228,739 0.03% 228,739 0.03% Appanna Patil Mayflower 1,397,325 0.23% 1,397,325 0.21% 1,397,325 0.21% Investments LLC Akkamahadevi 798,072 0.13% 798,072 0.12% 798,072 0.12% Melligeri Leela B Naikar 78,273 0.01% 78,273 0.01% 78,273 0.01% Vijaya 78,273 0.01% 78,273 0.01% 78,273 0.01% Sugandhi Venkatesh 110,000 0.02% 110,000 0.02% 110,000 0.02% Shivaputrappa Melligeri Additional top 10 Shareholders Amansa 50,132,863 8.13% 50,132,863 7.44% 50,132,863 7.48% Investments Ltd Steadview 22,820,619 3.70% 22,820,619 3.39% 22,820,619 3.40% Capital Mauritius Limited Amicus Capital 21,793,063 3.53% 12,913,148 1.92% 12,913,148 1.93% Partners India Fund II# Catamaran 19,005,748 3.08% 19,005,748 2.82% 19,005,748 2.83% Ekam Aroor 15,811,500 2.56% 15,811,500 2.35% 15,811,500 2.36% Raghavendra Sparta Group 15,750,380 2.55% 15,750,380 2.34% 15,750,380 2.35% LLC Amicus Capital 12,418,403 2.01% 4,936,495 0.73% 4,936,495 0.74% Private Equity I LLP# Sbi Emergent 5,081,874 0.82% 5,081,874 0.75% 5,081,874 0.76% India Fund Think India 4,331,750 0.70% 4,331,750 0.64% 4,331,750 0.65% Opportunities Master Fund LP Vivekanandhan 4,054,926 0.66% 4,054,926 0.60% 4,054,926 0.60% Srinivasan Maripudi *Assuming full subscription in the Offer and subject to finalization of the Basis of Allotment.

**Also the Promoter Selling Shareholder. # Selling Shareholders.

21Summary of selected financial information The summary of certain financial information as set out under the SEBI ICDR Regulations as of and for the six months period ended September 30, 2025 and September 30, 2024 and for the Fiscals 2025, 2024 and 2023,

derived from the Restated Consolidated Financial Information is set forth below: (₹ in million, unless otherwise specified) Particulars As at and for As at and for As at and for As at and for As at and for the six months the six months the Fiscal the Fiscal the Fiscal period ended period ended ended March ended March ended March September 30, September 30, 31, 2025 31, 2024 31, 2023 2025 2024 Equity share capital 6,050.02 4,247.59 5,818.29 4,247.59 4,247.58 Revenue from operations 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 Loss for the period/ year (169.77) (717.00) (1,023.46) (142.44) (1,094.95) Total Borrowings 5,335.11 3,847.86 4,370.62 2,918.81 3,461.39 Earnings per equity share for (0.30) (1.26) (1.80) (0.20) (2.44) profit from discontinued & continuing operation attributable to owners of Aequs Limited (formerly known as Aequs Private Limited) (Basic and Diluted in INR) (Nominal value per share – ₹ 10) Net Asset Value per Equity 13.60 12.89 12.47

14.82 6.21 Share (in ₹)(1) Total equity 8,044.88 7,401.07 7,159.78 8,156.20 2,672.52 Net Worth(2) 7,960.35 7,316.54 7,075.25 8,071.67 2,519.14

Notes:

1. Net asset value per Equity Share represents Net Worth as at the end of the year/period divided by weighted average number of Equity Shares considered for calculating basic and diluted EPS for the year/period.

2. Net Worth, as per Regulation 2(1)(hh) of the SEBI ICDR Regulations, means the aggregate value of the paid-up share capital and all reserves created out of the profits and securities premium account and debit or credit balance of profit and loss account, after deducting the aggregate value of the accumulated losses, deferred expenditure and miscellaneous expenditure not written off, as per the restated statement of assets and liabilities, but does not include reserves created out of revaluation of assets, write-back of depreciation and amalgamation. Further, Net Worth is calculated by deducting the revaluation reserve and common control capital reserve from the equity attributable to owners of the Company. Equity attributable to owners of the Company comprises of equity share capital, instruments entirely equity in nature and other equity.

3. For details, see “Other Financial Information – Reconciliation of Non-GAAP Financial Measures” on page 535.

For details, see “Restated Consolidated Financial Information” and “Other Financial Information” on pages 383 and 535, respectively.

Qualifications of the Statutory Auditors, which have not been given effect to in the Restated Consolidated Financial Information There are no qualifications which have not been given effect to in the Restated Consolidated Financial Information.

Summary of outstanding litigation A summary of outstanding litigation involving our Company, our Directors, our Key Managerial Personnel, Senior Management, our Promoters, our Subsidiaries and our Group Companies as required under the SEBI ICDR

Regulations as on the date of this Prospectus is provided below:

Disciplinary actions by SEBI or Stock Aggregate Actions by Exchanges against Material amount Category of individuals/ Criminal Tax statutory or our Promoters in the civil involved* entities proceedings proceedings regulatory last five years, litigation# (in ₹ authorities including outstanding million) action Company By the Company Nil N.A. N.A. N.A. Nil Nil Against the Company Nil 3 Nil N.A. Nil 805.34 Directors By the Directors Nil N.A. N.A. N.A. Nil Nil Against the Directors Nil 1 Nil N.A. Nil 3.31 22Key Managerial Personnel By the Key Managerial Nil N.A. N.A. N.A. N.A. N.A.

Personnel Against the Key Managerial Nil N.A. Nil N.A. N.A. N.A.

Personnel Senior Management By the Senior Management Nil N.A. N.A. N.A. N.A. N.A.

Against the Senior Nil N.A. Nil N.A. N.A. N.A.

Management Promoters By the Promoters Nil N.A. N.A. Nil Nil Nil Against the Promoters Nil Nil Nil Nil Nil Nil Subsidiaries By the Subsidiaries 1 N.A. N.A. N.A. Nil 0.44 Against the Subsidiaries Nil 7 Nil N.A. Nil 44.12 * To the extent quantifiable.

# Determined in accordance with the Materiality Policy.

As on the date of this Prospectus, there are no pending litigation involving our Group Companies which will have a material impact on our Company. For further details of the outstanding litigation proceedings, see “Outstanding Litigation and Other Material Developments” on page 581.

Risk factors Specific attention of Investors is invited to the section “Risk Factors” on page 37. Investors are advised to read the risk factors carefully before taking an investment decision in the Offer. Set forth below are the top 10 risk

factors:

S. Description of Risk No.

1. We derive a significant portion of our net external revenue from the Aerospace Segment (88.23% for the six months period ended September 30, 2025, 86.00% for the six months period ended September 30, 2024, 89.19% for the Financial Year 2025, 78.44% for the Financial Year 2024 and 72.06% for the Financial Year 2023). Any decrease in demand of products within the Aerospace Segment or any development that makes the sale of products within the Aerospace Segments less economically beneficial may adversely affect our business, results of operations, financial condition and cash flows.

2. We are dependent on our ten largest customer groups, which comprise a significant portion of our revenue from operations (82.51% for the six months period ended September 30, 2025, 85.56% for the six months period ended September 30, 2024, 88.57% for the Financial Year 2025, 86.51% for the Financial Year 2024 and 86.48% for the Financial Year 2023). Any failure to maintain our relationship with these customer groups or any adverse changes affecting their financial condition will have an adverse effect on our business, results of operations, financial condition and cash flows.

3. Our contractual arrangements with our OEM customer groups are typically requirement-based contracts which do not obligate our customers to place a fixed quantity of orders with us within a fixed time frame, and any termination of such contracts or decline in the production requirements of any of our customers, may adversely affect our business, results of operations, financial condition and cash flows.

4. Our business requires significant capital expenditure to maintain or upgrade equipment and machinery across our existing manufacturing clusters and facilities. If we are unable to have access to capital, it may adversely affect our business, results of operations, financial condition and cash flows.

5. While we intend to use a portion of the Net Proceeds to purchase and install machinery and equipment for our Company and our Subsidiary, AeroStructures Manufacturing India Private Limited, to expand our existing capacities, we cannot assure you that we will be able to maintain the existing levels of capacity utilization within the segments of our manufacturing clusters we operate in or facilities, which may adversely affect our results of operations. Further, a slowdown or shutdown in our manufacturing operations could have an adverse effect on our business, results of operations, financial condition and cash flows.

6. Our business is subject to fluctuations in the prices and disruptions in the availability of raw materials, which may have an adverse effect on our business, results of operations, financial condition and cash flows.

7. All the units in the manufacturing clusters that we operate in, in India are located in the state of Karnataka, which may expose us to regional risks that could adversely affect our business, results of operations, financial condition, and cash flows.

8. Our Company and certain of our Subsidiaries have had negative operating cash flows in the past and may continue to have negative operating cash flows in the future, which could adversely affect our results of operations and financial condition.

9. A downgrade in our credit rating could adversely affect our ability to raise capital in the future.

10. Our business and results of operations may be adversely affected if we are unable to maintain or improve capacity utilization following the installation of additional plant and machinery from the proceeds of the Offer.

23Summary of contingent liabilities The following is a summary table of our contingent liabilities as at September 30, 2025: (₹ in million) S. Particulars As at September No. 30, 2025

1. Labour related matters 73.10

2. Tax matters 861.22 Total 934.32 For further details of the contingent liabilities, see “Restated Consolidated Financial Information – Note 30 – Contingent Liabilities” on page 465.

Summary of related party transactions The following is the summary of transactions with related parties for the six months period ended September 30, 2025 and September 30, 2024 and for the Fiscals 2025, 2024 and 2023 as derived from the Restated Consolidated

Financial Information: (₹ in million) Six months period ended Particulars September 30, Fiscals ended Related parties with Nature of whom Nature of relationship 2025 2024 2025 2024 2023 transaction transactions have taken place Issue of shares - for - - consideration other - - 839.20 than cash Expenses incurred Aequs - - on behalf of related Manufacturing - - 0.03 entity Investments Holding company Unsecured loan Private - - taken during the Limited - 248.14 - period/ year Interest expense - 16.87 15.80

32.77 - - others Expenses incurred - - on behalf of related - 0.12 0.08 Associates entity Sale of PPE Aequs - - - 0.01 0.01 Expenses incurred Foundation, Enterprises in which - on behalf of related India(1) individuals owning interest in 0.32 - - - entity the Group, or their relatives have control, joint control or - - - - - Sale of PPE significant influence Employee stock - - option expense 0.16 0.49 0.61 cross charge Expenses incurred - 0.27 on behalf of related 0.28 8.93 8.44 entity Fair value of SQuAD - - financial guarantee Forging India Joint Venture 0.90 0.90 8.91 issued during the Private period/ year Limited Financial guarantee 1.20 1.20

2.40 5.21 8.48 income Investments in - - - 154.88 71.78 equity shares Sale of goods 0.09 1.64 55.61 42.67 22.63 Sale of PPE - - 0.01 - - 24Six months period ended Particulars September 30, Fiscals ended Related parties with Nature of whom Nature of relationship 2025 2024 2025 2024 2023 transaction transactions have taken place Expenses incurred - -

0.05 - - by related party Services provided 35.67 24.63 10.80 2.28 10.59 Purchase of goods 34.68 29.16

42.53 35.38 1.52 and consumables Services received 78.86 0.51 0.39 0.37 - Impairment of - - - - 19.37 investments Employee stock - - option expense - 0.09 - cross charge Expenses incurred - - on behalf of related 0.03 14.34 13.31 entity Expenses incurred - 0.29

0.01 - - by related party Aerospace Sale of goods Processing - - 0.07 - - Joint Venture Services received India Private 195.30 151.84 323.55 267.45 210.62 Services provided Limited 10.56 9.60 19.20 5.25 5.33 Financial guarantee 0.45 0.45

0.90 0.85 0.18 income Purchase of goods 0.44 -

0.13 - - and consumables Fair value of - - financial guarantee - 6.32 - issued Unsecured loan - - given during the - - 1.00 period/ year Aequs Rajas Interest income on - - Extrusion unsecured loan Subsidiary - - 0.61 Private given Limited(2) Expenses incurred - - on behalf of related - - 0.62 entity Expenses incurred 0.03 - on behalf of related 0.43 - - party Expenses incurred 1.80 -

2.27 - - by related party Financial guarantee 3.22 -

3.20 - - Income Fair value of - - financial guarantee Aequs

64.29 - - issued during the Cookware Joint Venture period/ year Private Deferred business Limited(3) - -

300.53 - - consideration Employee stock - -

0.16 - - option expense Investments in - 41.50

41.50 equity shares Interest on deferred 18.03 - business 18.03 - - consideration 25Six months period ended Particulars September 30, Fiscals ended Related parties with Nature of whom Nature of relationship 2025 2024 2025 2024 2023 transaction transactions have taken place Expenses incurred - - Enterprises in which on behalf of related Industrial individuals owning interest in 0.37 0.78 2.61 entity Knowledge the group, or their relatives Expenses incurred Centre Private have control, joint control or by related party Limited significant influence Services received - 1.46 1.48 61.14 78.60 Deposit given - - 14.43 5.22 0.11 Expenses incurred 0.13 0.32 on behalf of related 8.72 19.65 31.19 entity Expense incurred - 0.12

1.23 0.75 - by related party Financial guarantee 5.48 10.64

10.21 43.70 17.07 expense Interest income on - - - - 4.10 unsecured loan Interest expense on 109.91 126.13

246.38 219.81 192.06 lease liability Repayment of lease 146.38 125.08

256.99 - 188.81 liability Surrender of lease Enterprises in which - -

63.05 - - liability Aequs SEZ individuals owning interest in Services received Private the group, or their relatives 174.47 196.26 444.89 702.26 386.35 Sale of services Limited have control, joint control or - - - 4.70 3.81 Repayment of loan significant influence - - by Aequs SEZ - - 60.00 Private Limited Interest expense on - - unsecured loan - - 17.30 taken Repayment of - - unsecured loan - - 285.40 taken Sale of PPE - - - - 1.64 Sale of scrap - - - - 0.33 Fair value of 7.87 5.22 financial guarantee

8.22 73.46 11.48 received during the period/ year Expenses incurred - - - - 0.00 by related entity Interest expenses Aequs, Inc. Ultimate holding company - - - - 21.27 on loan taken Repayment of loan - - - - - Expenses incurred Enterprises in which - - - - 0.03 by related entity Melligeri individuals owning interest in Investment the group, or their relatives Interest on loan LLC have control, joint control or 1.08 1.00

2.10 2.02 1.99 taken significant influence QuEST 13.29 2.10 Enterprises in which Global individuals owning interest in Engineering Services received the group, or their relatives 10.03 2.55 2.64 Services have control, joint control or Private significant influence Limited 26Six months period ended Particulars September 30, Fiscals ended Related parties with Nature of whom Nature of relationship 2025 2024 2025 2024 2023 transaction transactions have taken place Expenses incurred - - on behalf of related - 0.50 0.00 entity Enterprises in which Fair value of individuals owning interest in - - MFRE Private financial guarantee the group, or their relatives Trust - 1.02 - received during the have control, joint control or period/ year significant influence Financial guarantee 0.07 3.38 - 1.65 - expense Expenses incurred Enterprises in which - - on behalf of related MFRE Estate individuals owning interest in - - 0.00 entity Private the group, or their relatives Financial guarantee Limited have control, joint control or - - - 0.76 0.15 expense significant influence Enterprises in which 0.86 0.00 Automotive Expenses incurred individuals owning interest in End Solution on behalf of related the group, or their relatives - - 0.02 Private entity have control, joint control or Limited significant influence Royalty expenses Enterprises in which - - - 70.24 Aequs individuals owning interest in 5.00 5.00 Limited, the group, or their relatives Branding expenses 10.00 5.90 - Malta(4) have control, joint control or significant influence Deposit given - - - 44.90 54.43 Services received 97.78 69.49 239.81 231.49 8.93 Repayment of lease 8.69 10.72

18.82 - 0.98 liability Interest expenses 21.27 31.32

53.04 12.60 9.15 on lease liability Hubballi Enterprises in which Expenses incurred Durable individuals owning interest in - -

0.03 - - by related party Goods Cluster the group, or their relatives Expenses incurred Private have control, joint control or - - on behalf of related Limited significant influence - 0.60 0.15 entity Recognition of new - 0.98 - - - lease Transfer due to - -

183.24 - - slump sale Repayment of lease Enterprises in which - - - 13.27 9.54 liability individuals owning interest in MFRE Taris, the group, or their relatives - - Interest expenses LLC have control, joint control or - 0.46 1.08 on lease liability significant influence Mr. Aravind 90.36 21.69

43.89 40.84 44.32 Melligeri Mr. Rajeev 9.45 10.33

18.36 15.10 12.29 Kaul Mr. Ravi 4.01 4.41 Managerial Key management personnel Mallikarjun 7.23 5.35 5.18 remuneration and their relatives Hugar Mrs. Vidhya 1.25 -

0.42 - - Sarathy Mr. Dinesh 10.53 9.93

17.02 14.07 11.81 Iyer 27Six months period ended Particulars September 30, Fiscals ended Related parties with Nature of whom Nature of relationship 2025 2024 2025 2024 2023 transaction transactions have taken place Mr. Ajay - 0.38 Aravind 1.45 - - Prabhu Ms. Shubhada - 0.67 - 1.41 1.20 Rao Dr. Anup 2.25 - - - - Wadhawan Dr. Eberhard 2.49 - - - - Klaus Richter Short-term 117.82 44.57

83.90 72.18 74.09 employee benefits Post employee 0.39 0.37

0.75 0.76 0.71 benefits Share-based 2.13 2.47

3.71 3.83 - payment

Note: The above table excludes details of related party transactions eliminated during the six months period ended September 30, 2025 and September 30, 2024 and Fiscals ended March 31, 2025, March 31, 2024 and March 31, 2023, as per Schedule VI (paragraph (11)(I)(A)(i)(g) of the SEBI ICDR Regulations).

(1) Ceased to be an associate with effect from February 25, 2024.

(2) Ceased to be a joint venture with effect from June 19, 2023.

(3) Joint Venture with effect from September 30, 2024.

(4) Name of the entity changed from ‘Aequs Limited, Malta’ to ‘MFO IP Holdings Limited’ with effect from March 17, 2025.

Financing arrangements There have been no financing arrangements whereby our Promoters, member of the Promoter Group, directors of our Promoters, our Directors, and their Relatives have financed the purchase by any other person of securities of our Company other than in the normal course of the business of the financing entity during a period of six months immediately preceding the date of the Red Herring Prospectus and this Prospectus.

Weighted average cost of acquisition of Equity Shares transacted in the last one year, eighteen months and three years preceding the date of this Prospectus The details of weighted average cost of acquisition of Equity Shares transacted in the last one year, eighteen months, and three years preceding the date of this Prospectus is as follows:

Period Weighted Average Cost Cap Price is ‘X’ times Range of acquisition of Acquisition (in ₹) the Weighted Average price: Lowest Price – Cost of Acquisition Highest Price (in ₹) Last one year 90.23$ 1.37 Nil* - 123.97 Last eighteen months 79.97$ 1.55 Nil* - 123.97 Last three years 46.58$$ 2.66 Nil* - 123.97 The above details have been certified by Manian & Rao, Chartered Accountants (FRN No. 001983S), by way of certificate dated December 5,

2025. * Includes Equity Shares acquired by way of transfers through gift. $ Conversion of CCPS into Equity Shares has not been considered for calculation of weighted average cost of acquisition during the last one year and eighteen months as the CCPS were originally allotted prior to one year or eighteen months, as applicable.

$$ For the Equity Shares allotted pursuant to conversion of CCPS, the cost of acquisition of Equity Shares has been considered as the cost of acquisition of original CCPS.

Details of price at which specified securities were acquired by our Promoters, members of Promoter Group, Selling Shareholders and Shareholders with a right to nominate directors or any other special rights in the last three years preceding the date of this Prospectus Except as stated below, there have been no specified securities that were acquired in the last three years preceding the date of this Prospectus, by our Promoters, members of the Promoter Group, Selling Shareholders, and

Shareholders with a right to nominate directors or any other special rights in our Company:

28Nature of Face Date of Number of Acquisition S. Name of the acquirer/ specified value acquisition of securities price per No. Shareholder securities (in ₹) securities acquired security (in ₹) Promoters Aravind Shivaputrappa Equity 10 March 24, 2025

1. 500,000 10.00 Melligeri Equity 10 March 12, 2023 28,799,776 N.A.# Equity 10 August 2, 2024 182,998 12.79 Aequs Manufacturing Equity 10 August 12, 2024 8,169,935 30.60

2. Investments Private Equity 10 May 2, 2025 11,366,365 74.64 Limited*$ Equity 10 May 9, 2025 1,100,000 74.64 Equity 10 May 9, 2025 1,651,924 74.64 Equity 10 May 10, 2025 4,500,000 74.64 Promoter Group Mayflower Investments, Equity 10 September 24,

3. 1,397,325 N.A.@ LLC 2024 Equity 10 May 2, 2025 14,854 74.64

4. Babasaheb Appanna Patil Equity 10 May 8, 2025 141,174 26.27 Equity 10 May 12, 2025 100,000 26.10

5. Basavant Appanna Patil Equity 10 July 29, 2025 128,739 Nil@@

6. Akkamahadevi Melligeri Equity 10 April 21, 2025 798,072 Nil@@

7. Leela Basavaraj Naikar Equity 10 July 28, 2025 78,273 Nil@@ Vijaya Basavaraj Equity 10 July 28, 2025 Nil@@

8. 78,273 Sugandhi Venkatesh Shivaputrappa Equity 10 Nil@@

9. August 20, 2025 110,000 Melligeri Selling Shareholders Equity 10 March 24, 2023 135 22.40 Amicus Capital Private

10. CCPS 10 March 24, 2023 51,966,240 11.20 Equity I LLP Equity 10 March 30, 2025 19,745,845^ N.A.(1) Equity 10 March 24, 2023 15 22.40 Amicus Capital Partners

11. CCPS 10 March 24, 2023 5,240,100 11.20 India Fund I Equity 10 March 30, 2025 1,991,104^ N.A.(2) Equity 10 April 21, 2023 200 22.40 Amicus Capital Partners CCPS 10 April 21, 2023 66,007,260 11.20

12.

India Fund II$ Equity 10 March 30, 2025 25,081,068^ N.A.(3) Equity 10 May 2, 2025 745,028 74.64 Equity 10 October 30, 2023 10 31.56 Vasundhara Dempo CCPS 10 October 30, 2023 3,168,568 15.78

13.

Family Private Trust Equity 10 March 30, 2025 1,230,497^ N.A.(4) Equity 10 May 2, 2025 36,552 74.64 Equity 10 October 30, 2023 10 31.56 Girija Dempo Family CCPS 10 October 30, 2023 3,168,568 15.78

14.

Private Trust Equity 10 March 30, 2025 1,230,497^ N.A.(5) Equity 10 May 2, 2025 36,552 74.64

15. Raman Subramanian Equity 10 May 2, 2025 20,000 74.64 Equity 10 October 30, 2023 10 31.56 CCPS 10 October 30, 2023 6,337,136 15.78

16. Ravindra Mariwala Equity 10 March 30, 2025 2,460,995^ N.A.(6) Equity 10 May 2, 2025 73,103 74.64 The above details have been certified by Manian & Rao, Chartered Accountants (FRN No. 001983S), by way of certificate dated December 5,

2025. * Also the Promoter Selling Shareholders $ Also Shareholders with rights to nominate directors or other special rights #The amount paid on the acquisition of CCDs has not been considered in arriving at the acquisition price per Equity Share allotted pursuant to conversion of CCDs since the CCDs were originally allotted prior to more than three years @Transfer by way of distribution ^ These Equity Shares have been allotted upon the conversion of CCPS. The amount paid on the acquisition of CCPS has not been considered in arriving at the acquisition price per Equity Share allotted pursuant to conversion of CCPS, since the acquisition of CCPS and the price thereof has been disclosed as a separate line item for the CCPS acquired during the preceding three years. For further details, please see “Capital Structure – Notes to the Capital Structure – Share capital history of our Company – History of Equity Share capital of our Company” on page

116.

(1)19,745,845 of Equity Shares bearing face value of ₹ 10 each have been allotted pursuant to conversion of 51,966,240 of CCPS allotted on March 24, 2023.

(2) 1,991,104 of Equity Shares bearing face value of ₹ 10 each have been allotted pursuant to conversion of 5,240,100 of CCPS allotted on March 24, 2023.

29(3) 25,081,068 of Equity Shares bearing face value of ₹ 10 each have been allotted pursuant to conversion of 66,007,260 of CCPS allotted on April 21, 2023.

(4) 1,230,497 of Equity Shares bearing face value of ₹ 10 each have been allotted pursuant to conversion of 3,168,568 of CCPS allotted on October 30, 2023.

(5) 1,230,497 of Equity Shares bearing face value of ₹ 10 each have been allotted pursuant to conversion of 3,168,568 of CCPS allotted on October 30, 2023.

(6) 2,460,955 of Equity Shares bearing face value of ₹ 10 each have been allotted pursuant to conversion of 6,337,136 of CCPS allotted on October 30, 2023.

Weighted average price at which specified securities were acquired by each of our Promoters and Selling Shareholders in the last one year preceding the date of this Prospectus The weighted average price at which specified securities were acquired by our Promoters and Selling Shareholders

in the one year immediately preceding the date of this Prospectus is as follows:

Weighted average price Nature of Face Number of S. of acquisition Name specified value securities No. per specified securities (in ₹) acquired$ security (in ₹)$ Promoters

1. Aravind Shivaputrappa Melligeri Equity Shares 10 500,000 10.00

2. Aequs Manufacturing Investments Private Limited* Equity Shares 10 18,618,289 74.64

3. Melligeri Private Family Foundation* Equity Shares 10 N.A.^ N.A.^ Selling Shareholders

4. Amicus Capital Private Equity I LLP Equity Shares 10 19,745,845 29.48

5. Amicus Capital Partners India Fund I Equity Shares 10 1,991,104 29.48

6. Amicus Capital Partners India Fund II Equity Shares 10 25,826,096 30.78

7. Vasundhara Dempo Family Private Trust Equity Shares 10 1,267,049 41.62

8. Girija Dempo Family Private Trust Equity Shares 10 1,267,049 41.62

9. Raman Subramanian Equity Shares 10 20,000 74.64

10. Ravindra Mariwala Equity Shares 10 2,534,098 41.61 The above details have been certified by Manian & Rao, Chartered Accountants (FRN No. 001983S), by way of certificate dated December 5,

2025. * Also Promoter Selling Shareholders ^ No Equity Shares were acquired in the one year immediately preceding the date of this Prospectus. $ For the Equity Shares allotted pursuant to conversion of CCPS, the cost of acquisition of Equity Shares has been considered as the cost of acquisition of original CCPS.

Note: For arriving at the weighted average price per Equity Share acquired by the Promoters and the Selling Shareholders in the last one year, only acquisition of Equity Shares has been considered while arriving at weighted average price per Equity Share during last one year.

One of our Corporate Promoters, The Melligeri Foundation does not hold any Equity Shares in our Company.

Average cost of acquisition of Equity Shares of our Promoters and Selling Shareholders The average cost of acquisition per Equity Share of our Promoters and Selling Shareholders as at the date of this

Prospectus is as follows:

Average cost of acquisition Number of Equity S. per Equity Share bearing Name Shares bearing face No. face value of ₹ 10 each (in value of ₹ 10 acquired ₹)$ Promoters

1. Aravind Shivaputrappa Melligeri 1,000,100 18.05

2. Aequs Manufacturing Investments Private Limited* 302,245,192 29.11

3. Melligeri Private Family Foundation* 132,526,264 1.18

4. The Melligeri Foundation Nil Nil Selling Shareholders

5. Amicus Capital Private Equity I LLP 19,745,980 29.48

6. Amicus Capital Partners India Fund I 1,991,119 29.48

7. Amicus Capital Partners India Fund II 25,826,296 30.78

8. Vasundhara Dempo Family Private Trust 1,267,059 41.61

9. Girija Dempo Family Private Trust 1,267,059 41.61

10. Ravindra Mariwala 2,534,108 41.61

11. Raman Subramanian 300,000 30.60 30The above details have been certified by Manian & Rao, Chartered Accountants (FRN No. 001983S), by way of certificate dated December 5,

2025. * Also Promoter Selling Shareholders $ For the Equity Shares allotted pursuant to conversion of CCPS, the cost of acquisition of Equity Shares has been considered as the cost of acquisition of original CCPS.

Note: For arriving at the average cost of acquisition of the Equity Shares by the Promoters and the Selling Shareholders, only acquisition of Equity Shares has been considered while arriving at average cost of acquisition per Equity Share.

Details of Pre-IPO Placement Our Company had proposed to make a pre-IPO placement in the Updated Draft Red Herring Prospectus – I through a private placement, preferential offer or any other method as may be permitted under applicable law to any person(s), aggregating to ₹ 1,440.00 million, as permitted under applicable law. The Pre-IPO Placement, was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹ 123.97 per Equity Share bearing face value of ₹ 10 each, decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue, as disclosed in the UDRHP – I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue, as disclosed in the UDRHP - I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.

Issue of equity shares or preference shares for consideration other than cash in the last one year (excluding bonus issue) Our Company has not issued Equity Shares or Preference Shares for consideration other than cash (excluding bonus issue) in the one year preceding the date of this Prospectus.

Split/ consolidation of Equity Shares in the last one year Our Company has not undertaken any split or consolidation of Equity Shares in one year preceding the date of this Prospectus.

Exemption from complying with any provisions of securities laws, if any, granted by the Securities and Exchange Board of India As on the date of this Prospectus, our Company has not sought any exemption from complying with any provisions of securities laws from SEBI.

31CERTAIN CONVENTIONS, USE OF FINANCIAL INFORMATION AND MARKET DATA AND CURRENCY OF PRESENTATION Certain Conventions All references in this Prospectus to “India” are to the Republic of India and its territories and possessions and all references herein to the “Government”, “Indian Government”, “GoI”, “Central Government” or the “State Government” are to the Government of India, central or state, as applicable. All references herein to “US”, the “U.S.” or the “United States” are to the United States of America and its territories and possessions.

Unless indicated otherwise, all references to time in this Prospectus are to Indian Standard Time (“IST”). Unless indicated otherwise, all references to a year in this Prospectus are to a calendar year.

Unless indicated otherwise, all references to page numbers in this Prospectus are to page numbers of this Prospectus.

Financial Data Our Company’s financial year commences on April 1 of the immediately preceding calendar year and ends on March 31 of that particular calendar year. Accordingly, all references to a particular fiscal or financial year are to the 12-month period commencing on April 1 of the immediately preceding calendar year and ending on March 31 of that particular calendar year.

Unless indicated otherwise, the financial information in this Prospectus is derived from our Restated Consolidated Financial Information. The restated consolidated financial information of our Company, Aequs Stock Option Plan Trust and our Subsidiaries, our associate and our Joint Ventures, included in this Prospectus comprise the restated consolidated statement of assets and liabilities as at and for the six months period ended September 30, 2025 and September 30, 2024 and for the financial years ended March 31, 2025, March 31, 2024 and March 31, 2023, the restated consolidated statement of profit and loss (including other comprehensive income), the restated consolidated statement of changes in equity and the restated consolidated statement of cash flows for the six months period ended September 30, 2025 and September 30, 2024 and for the financial years ended March 31, 2025, March 31, 2024 and March 31, 2023, the material accounting policies and other explanatory information and notes, and are prepared as per requirements of (a) Section 26 of Part I of Chapter III of the Companies Act 2013, (b) the SEBI ICDR Regulations and (c) the Guidance Note on Reports in Company Prospectuses (Revised

2019) issued by the ICAI, and included in “Restated Consolidated Financial Information” on page 383.

Unless the context otherwise requires, any percentage, amounts, as set forth in “Risk Factors”, “Summary of the Offer Document”, “Our Business” and “Management’s Discussion and Analysis of Financial Conditions and Results of Operations” on pages 37, 18, 288 and 539, respectively and elsewhere in this Prospectus have been calculated on the basis of our Restated Consolidated Financial Information unless otherwise stated.

There are significant differences between the Ind AS, the IFRS and the Generally Accepted Accounting Principles in the United States of America (the “U.S. GAAP”). Accordingly, the degree to which the financial information included in this Prospectus will provide meaningful information is entirely dependent on the reader’s level of familiarity with Indian accounting practices. Any reliance by persons not familiar with the Ind AS, the Companies Act 2013 and the SEBI ICDR Regulations, on the financial disclosures presented in this Prospectus should accordingly be limited. We have not attempted to quantify or identify the impact of the differences between the financial data (prepared under Ind AS and IFRS/U.S. GAAP), nor have we provided a reconciliation thereof. We urge you to consult your own advisors regarding such differences and their impact on our financial data included in this Prospectus. For details see, “Risk Factors – Significant differences exist between the Indian Accounting Standards used to prepare our financial information and other accounting principles, such as the United States Generally Accepted Accounting Principles and the International Financial Reporting Standards, which may affect investors’ assessments of our financial condition.” on page 91.

Prospective investors should consult their own professional advisers for an understanding of the differences between these accounting principles and those with which they may be more familiar, and the impact on our financial data. The degree to which the financial information included in this Prospectus will provide meaningful information is entirely dependent on the reader’s level of familiarity with Indian accounting policies and practices, Ind AS, the Companies Act 2013 and the SEBI ICDR Regulations. Any reliance by persons not familiar with these accounting principles and regulations on our financial disclosures presented in this Prospectus should accordingly be limited.

32Certain figures contained in this Prospectus, including financial information, have been subject to rounding adjustments. All decimals have been rounded off to two decimal points. In certain instances, (i) the sum or percentage change of such numbers may not conform exactly to the total figure given; and (ii) the sum of the numbers in a column or row in certain tables may not conform exactly to the total figure given for that column or row. However, where any figures that may have been sourced from third-party industry sources are rounded off to other than two decimal points in their respective sources, such figures appear in this Prospectus as rounded-off to such number of decimal points as provided in such respective sources.

Non-Generally Accepted Accounting Principles Financial Measures Certain non-generally accepted accounting principles (“Non-GAAP”) financial measures, such as Net Worth, Return on Net Worth, Net Asset Value per Equity Share, EBITDA, EBIDTA Margin, EBITDA - Aerospace Segment, EBITDA – Aerospace Segment Margin %, EBITDA - Consumer Segment, EBITDA – Consumer Segment Margin % and PAT Margin (“Non-GAAP Financial Measures”) presented in this Prospectus are a supplemental measure of our performance and liquidity that are not required by, or presented in accordance with Ind AS. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535. Further, these Non-GAAP Financial Measures are not a measurement of our financial performance or liquidity under Ind AS and should not be considered in isolation or construed as an alternative to cash flows, profit/(loss) for the year or any other measure of financial performance or as an indicator of our operating performance, liquidity, profitability or cash flows generated by operating, investing or financing activities derived in accordance with Ind AS. In addition, the Non-GAAP Financial Measures used by our Company and their definition as set out herein, are not standardised terms, hence a direct comparison of similarly titled Non-GAAP Financial Measures between companies may not be possible. Other companies may calculate the Non-GAAP Financial Measures differently from us, limiting their usefulness as a comparative measure. Although the Non-GAAP Financial Measures are not a measure of performance calculated in accordance with applicable accounting standards, our Company’s management believes that they are useful to an investor in evaluating us because they are widely used measures to evaluate a company’s operating performance. For details see, “Risk Factors – Significant differences exist between the Indian Accounting Standards used to prepare our financial information and other accounting principles, such as the United States Generally Accepted Accounting Principles and the International Financial Reporting Standards, which may affect investors’ assessments of our financial condition.” on page 91.

Industry and Market Data For the purpose of confirming our understanding of the industry in connection with the Offer, we have commissioned and paid for a report titled “An Assessment of Aerospace and Consumer PEC Industry” dated November 14, 2025 (“F&S Report”) prepared by Frost & Sullivan (India) Private Limited (“F&S”), who were appointed pursuant to an engagement letter dated December 10, 2024, as supplemented by a subsequent engagement letter dated September 8, 2025. The F&S Report was available on the website of our Company from the date of filing of the Red Herring Prospectus until the Bid/Offer Closing Date at www.aequs.com/investor/.

F&S is an independent agency and is not a related party of our Company, our Subsidiaries, Directors, Key Managerial Personnel, Senior Management, our Promoters or the Book Running Lead Managers.

The F&S report is subject to the following:

Frost & Sullivan has taken due care and caution in preparing the report (“F&S Report”) based on the information obtained by Frost & Sullivan from sources which it considers reliable (“Data”). The F&S Report is not a recommendation to invest / disinvest in any entity covered in the F&S Report and no part of the F&S Report should be construed as an expert advice or investment advice or any form of investment banking within the meaning of any law or regulation. Without limiting the generality of the foregoing, nothing in the F&S Report is to be construed as Frost & Sullivan providing or intending to provide any services in jurisdictions where Frost & Sullivan does not have the necessary permission and/or registration to carry out its business activities in this regard.

Aequs Limited will be responsible for ensuring compliances and consequences of non-compliances for use of the F&S Report or part thereof outside India. No part of the F&S Report may be published/reproduced in any form without Frost & Sullivan’s prior written approval.

Aside from the above, unless otherwise stated, industry and market data used throughout this Prospectus has been obtained from publicly available sources of industry data. The data used in these sources may have been reclassified by us for the purposes of presentation. Data from these sources may also not be comparable. The extent to which the industry and market data presented in this Prospectus is meaningful depends upon the reader’s familiarity with and understanding of the methodologies used in compiling such data. There are no standard data gathering methodologies in the industry in which we conduct our business and methodologies and assumptions 33may vary widely among different market and industry sources. For details, see “Risk Factors – This Prospectus contains information from third parties, including an industry report prepared by an independent third-party research agency, Frost & Sullivan (India) Private Limited, which we have commissioned and paid for purposes of confirming our understanding of the industry exclusively in connection with the Offer.” on page 85.

In accordance with the SEBI ICDR Regulations, the section “Basis for Offer Price” on page 166 includes information relating to our peer group companies, which has been derived from publicly available sources.

Currency and Units of Presentation

All references to: • “Rupees” or “₹” or “Rs.” or “INR” are to Indian Rupees, the official currency of the Republic of India; • “US$”, “U.S. Dollar”, “USD” or “U.S. Dollars” are to United States Dollar, the official currency of the United States of America;

• “Euro”, “EURO” and “€” are to Euros, the official currency of the European Union. • “GBP” or “£” are to Pound sterling, the official currency of the United Kingdom; and • “HKD” are to Hong Kong Dollar, the official currency of Hong Kong.

In this Prospectus, our Company has presented certain numerical information. All figures have been expressed in millions or in whole numbers where the numbers have been too small to represent in millions, except where specifically indicated. One million represents 10 lakhs or 1,000,000 and 10 million represents one crore or 10,000,000. However, where any figures that may have been sourced from third party industry sources are expressed in denominations other than millions in their respective sources, such figures appear in this Prospectus expressed in such denominations as provided in such respective sources.

Exchange Rates This Prospectus contains conversions of U.S. Dollars and other currency amounts into Indian Rupees that have been presented solely to comply with the requirements of the SEBI ICDR Regulations. These conversions should not be construed as a representation that such currency amounts could have been, or can be converted into Indian Rupees, at any particular rate, or at all.

The following table sets forth as of the dates indicated, information with respect to the exchange rate between the

Indian Rupee and certain other currencies: (in ₹) Currency Exchange rate as on September 30, September 30, March 31, 2025 March 31, 2024 March 31, 2023 2025 2024 1 USD 88.80 83.79 85.58 83.37 82.22 1 EURO 104.22 93.53 92.32 90.22 89.60 1 GBP 119.35 112.16 110.73 105.29 101.87 1 HKD 11.40 10.77 11.00 10.65 10.47

Source: www.rbi.org, www.fbil.org.in and www.oanda.com

Note: The exchange rates are rounded off to two decimal places and in case of any public holiday, the previous Working Day not being a public holiday has been considered.

Notice to Prospective Investors in the United States The Equity Shares have not been recommended by any U.S. federal or state securities commission or regulatory authority. Furthermore, the foregoing authorities have not confirmed the accuracy or determined the adequacy of this Prospectus or approved or disapproved the Equity Shares. Any representation to the contrary is a criminal offence in the United States. In making an investment decision, investors must rely on their own examination of our Company and the terms of the Offer, including the merits and risks involved. The Equity Shares in the Offer have not been and will not be registered under the United States Securities Act of 1933, as amended (the “U.S.

Securities Act”) or any other applicable law of the United States and, unless so registered, may not be offered or sold within the United States except pursuant to an exemption from, or in a transaction not subject to, the registration requirements of the U.S. Securities Act and applicable state securities laws. Accordingly, the Equity Shares are being offered and sold (a) in the United States only to persons reasonably believed to be “qualified 34institutional buyers” (as defined in Rule 144A under the U.S. Securities Act and referred to in this Prospectus as “U.S. QIBs”; for the avoidance of doubt, the term U.S. QIBs does not refer to a category of institutional investor defined under applicable Indian regulations and referred to in the Red Herring Prospectus and this Prospectus as “QIBs”) pursuant to Section 4(a) of the U.S. Securities Act; and (b) outside of the United States in offshore transactions as defined in and in compliance with Regulation S and the applicable laws of the jurisdiction where those offers and sales occur. See “Other Regulatory and Statutory Disclosures – Eligibility and Transfer Restrictions” on page 595.

The Equity Shares have not been and will not be registered, listed or otherwise qualified in any other jurisdiction outside India and may not be offered or sold, and Bids may not be made, by persons in any such jurisdiction except in compliance with the applicable laws of such jurisdiction.

35FORWARD-LOOKING STATEMENTS This Prospectus contains certain “forward-looking statements”. All statements regarding our expected financial condition and results of operations, business, plans and prospects are forward-looking statements, which include statements with respect to our business strategy, our revenue and profitability, our goals and other matters discussed in this Prospectus regarding matters that are not historical facts. These forward-looking statements can generally be identified by words or phrases such as “aim”, “anticipate”, “believe”, “expect”, “estimate”, “intend”, “likely to”, “objective”, “plan”, “propose”, “project”, “will continue”, “seek to”, “strive to”, “will pursue”, “will achieve” or other words or phrases of similar import. Similarly, statements which describe our strategies, objectives, plans or goals are also forward-looking statements.

These forward-looking statements are based on our current plans, estimates and expectations, and are subject to risks, uncertainties and assumptions about us that could cause actual results to differ materially from those contemplated by such forward-looking statements. This could be due to risks or uncertainties associated with our expectations with respect to, but not limited to, regulatory changes in the industry we operate in and our ability to respond to them, our ability to successfully implement our strategy, our growth and expansion, technological changes, our exposure to market risks, general economic and political conditions in India that may have an impact on our business or investments, monetary and fiscal policies of India, inflation, deflation, unanticipated turbulence in interest rates, foreign exchange rates, equity prices or other rates and prices, the general performance of Indian and global financial markets, changes in the competitive landscape and incidence of any natural calamities and/or violence.

For a discussion of factors that could cause our actual results to differ from expectations, see “Risk Factors”, “Our Business”, “Industry Overview”, and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” on pages 37, 288, 219, and 539 respectively. By their nature, certain market risk disclosures are only estimates and could be materially different from what actually occurs in the future. As a result, actual future gains or losses could materially differ from those that have been estimated. Forward-looking statements reflect our current views as of the date of this Prospectus and are not a guarantee of future performance.

Although we believe that the assumptions on which such statements are based are reasonable, any such assumptions as well as the statements based on them could prove to be inaccurate. These statements are based on our management’s beliefs and assumptions, which in turn are based on currently available information.

We cannot assure Bidders that the expectations reflected in these forward-looking statements will prove to be correct. Given these uncertainties, Bidders are cautioned not to place undue reliance on such forward-looking statements and not to regard such statements as a guarantee of our future performance.

Neither our Company, our Promoters, Selling Shareholders, Directors, nor the Syndicate, or any of their respective affiliates have any obligation to update or otherwise revise any statements reflecting circumstances arising after the date hereof or to reflect the occurrence of underlying events, even if the underlying assumptions do not come to fruition. In accordance with the SEBI ICDR Regulations, our Company and the BRLMs will ensure that Bidders in India are informed of material developments, which may have a material effect on our Company from the date of this Prospectus until the time of Allotment. In accordance with the requirements of SEBI and as prescribed under the applicable law, the Selling Shareholders, severally and not jointly, in respect of statements made by them in this Prospectus, shall ensure (through our Company and the BRLMs) that the investors are informed of material developments in relation to their respective statements specifically confirmed or undertaken by them in the Red Herring Prospectus and this Prospectus until the date of Allotment, with respect to their respective portion of the Offered Shares pursuant to the Offer.

36SECTION II - RISK FACTORS An investment in our Equity Shares involves a high degree of risk. Prospective investors should carefully consider all information in this Prospectus, including the risks and uncertainties described below, before making an investment in our Equity Shares. If any or some combination of the following risks actually occur, or if any of the risks that are currently not known or deemed to be not relevant or material now actually occur or become material in the future, our business, prospects, financial condition and results of operations could suffer, the trading price of our Equity Shares could decline and prospective investors may lose all or part of their investment.

We have described the risks and uncertainties that we believe are material, but these risks and uncertainties may not be the only risks relevant to us, the Equity Shares, the geographies, or the industry in which we operate in.

Some risks may be unknown to us and other risks, currently believed to be immaterial, could be or become material. To obtain a complete understanding of our business, prospective investors should read this section in conjunction with the sections “Our Business”, “Industry Overview”, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Financial Information” on pages 288, 219, 539 and 383, respectively. In making an investment decision, prospective investors must rely on their own examination of our business and the terms of the Offer, including the merits and risks involved. Prospective investors should consult their tax, financial and legal advisors about the particular consequences to them of an investment in our Equity Shares.

This Prospectus also contains forward-looking statements, which refer to future events that involve known and unknown risks, assumptions, estimates, uncertainties and other factors, many of which are beyond our control, which may cause the actual results to be materially different from those expressed or implied by the forward- looking statements. See “Forward-Looking Statements” on page 36. Unless specified or quantified in the relevant risk factors below, we are not in a position to quantify the financial or other implications of any of the risks described in this section.

Unless otherwise indicated, the industry-related information contained in this Prospectus is derived from the report titled “An Assessment of Aerospace and Consumer PEC Industry” dated November 14, 2025, (the “F&S Report”), which has been commissioned and paid for by our Company for an agreed fee for the purposes of confirming our understanding of the industry exclusively in connection with the Offer. A copy of the F&S Report was available on the website of our Company at www.aequs.com/investor/ from the date of filing of the Red Herring Prospectus until the Bid/Offer Closing Date and has also been included in “Material Contracts and Documents for Inspection – Material Documents” on page 682. We officially engaged Frost & Sullivan (India) Private Limited (“F&S”), in connection with the preparation of the F&S Report pursuant to an engagement letter dated December 10, 2024, as supplemented by a subsequent engagement letter dated September 8, 2025. Unless otherwise indicated, all financial, operational, industry and other related information derived from the F&S Report and included herein with respect to any particular year refers to such information for the relevant Financial Year. The data included in this section includes excerpts from the F&S Report and may have been re- ordered by us for the purposes of presentation. There are no parts, data or information (which may be relevant for the Offer), that have been left out or changed in any manner.

Our Financial Year commences on April 1 and ends on March 31 of the subsequent year, and references to a particular Financial Year are to the 12 months ended March 31 of that year. Unless otherwise stated, or the context otherwise requires, the financial information used in this section is derived from our “Financial Information” on page 383. Our Restated Consolidated Financial Information have been prepared in accordance with the SEBI ICDR Regulations.

INTERNAL RISK FACTORS

1. We derive a significant portion of our net external revenue from the Aerospace Segment (88.23% for the six months period ended September 30, 2025, 86.00% for the six months period ended September 30, 2024, 89.19% for the Financial Year 2025, 78.44% for the Financial Year 2024 and 72.06% for the Financial Year 2023). Any decrease in demand of products within the Aerospace Segment or any development that makes the sale of products within the Aerospace Segments less economically beneficial may adversely affect our business, results of operations, financial condition and cash flows.

We derive a significant portion of our net external revenue from the Aerospace Segment, as set out in the table below for the periods/years indicated:

37Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Net external revenue - Aerospace Segment (₹ in 4,739.53 3,947.23 8,246.41 7,569.78 5,851.82 million) Net external revenue - Aerospace Segment, as a 88.23 86.00 89.19 78.44 72.06 percentage of revenue from operations (%) Thus, our business is heavily dependent on the performance of the global aerospace industry, particularly in the U.S., France and India, which are the main markets that we sell our products to. While we have not faced any such instances which materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the Financial Years 2025, 2024 and 2023, in the event of a decrease in demand for products within the Aerospace Segment or any development that makes the sale of products within the Aerospace Segment less economically beneficial, our business may be adversely affected. In the past, the travel restrictions imposed during the COVID-19 pandemic significantly reduced the demand for products within the Aerospace Segment due to the slowdown in the aerospace industry as a result of global travel restrictions. The global aerospace industry may also be affected by, among others, economic conditions, political unrest, terrorist attacks, demographic trends, employment and income levels, interest rates and changes in government policies, which may result in a decrease in demand for the components, we manufacture or make the sale of these components less economically beneficial, thereby adversely affecting our business, results of operations, financial condition and cash flows.

2. We are dependent on our ten largest customer groups, which comprise a significant portion of our revenue from operations (82.51% for the six months period ended September 30, 2025, 85.56% for the six months period ended September 30, 2024, 88.57% for the Financial Year 2025, 86.51% for the Financial Year 2024 and 86.48% for the Financial Year 2023). Any failure to maintain our relationship with these customer groups or any adverse changes affecting their financial condition will have an adverse effect on our business, results of operations, financial condition and cash flows.

We derive a significant portion of our revenue from operations from our ten largest customer groups, and thus we are heavily dependent on our ten largest customer groups. As our key customer groups are primarily OEMs in the aerospace and consumer industries, any adverse changes affecting the financial condition of such OEMs in the aerospace or consumer industry, including a decrease in demand for products within the Aerospace or Consumer Segments, or particular models of products within the Aerospace or Consumer Segments, which our key customer groups sell, may have an adverse effect on our business, results of operations, financial condition and cash flows.

Our business is dependent on our ability to maintain and strengthen our relationships and arrangements with our existing key customer groups. Our relationship with our key customer groups is dependent on our ability to remain competitive in terms of price, timeliness and quality, among others. If we are unable to remain competitive in the future, it may result in a decrease in orders or cessation of business from our key customer groups. Further, any shortcomings in consistency in our product quality may also result in negative publicity for our Company, which in turn could adversely affect our business, prospects and reputation. Any failure by us to maintain our relationships with such key customer groups or any inability to develop new services and solutions for existing customers or to successfully establish relationships with new customers in the future may have an adverse effect on our business and results of operations. The loss of one or more of key customer groups or a reduction in the amount of business we obtain from them could have an adverse effect on our business, results of operations, financial condition and cash flows. Our key customer groups may source their products within the Aerospace Segment and Consumer Segment from other manufacturers, particularly if we are unable to deliver products that are customizable to the needs of customer groups, which in turn may result in a reduction in their business volumes with us, thereby adversely affecting our results of operations, financial condition and cash flows. While we have not faced any such instances of termination of contracts by our key customer groups, or had customers who renewed their contracts/purchase orders but subsequently discontinued their contracts/purchase orders, which materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the Financial Years 2025, 2024 and 2023, we cannot assure you that we will be able to maintain historic levels of business and/or negotiate and enter into contracts on terms that are commercially viable with our key customers in the future. In the past, travel restrictions imposed during the COVID-19 pandemic significantly reduced demand for products within the Aerospace Segment by our customers during the Financial Year 2022, due to the slowdown in the aerospace industry as a result of global travel restrictions. In addition, any factors or events which adversely affect the business or operations of our key customer groups could in turn adversely affect our business, if our sale of products to these customer groups decrease.

38The following tables set forth the revenue contribution of our ten largest customer groups for the periods/years

indicated:

Customer groups For the six months period ended September 30, 2025 2024 (₹ in million) (% of revenue (₹ in million) (% of revenue from from operations) operations) Total revenue from three largest customer groups 2,867.74 53.39% 2,380.35 51.86% Total revenue from five largest customer groups 3,564.78 66.36% 3,199.36 69.71% Total revenue from ten largest customer groups* 4,432.15 82.51% 3,927.08 85.56% Customer groups For the Financial Year 2025 2024 2023 (₹ in (% of (₹ in (% of (₹ in (% of million) revenue million) revenue million) revenue from from from operation operation operation s) s) s) Total revenue from three largest 4,990.48 53.97% 4,897.90 50.75% 4,161.56 51.24% customer groups Total revenue from five largest 6,765.43 73.17% 6,666.43 69.08% 5,347.43 65.84% customer groups Total revenue from ten largest 8,188.83 88.57% 8,349.04 86.51% 7,023.10 86.48% customer groups* *Our ten largest customer groups include Collins, Eaton and Hasbro. These customer groups may not be our ten largest customer groups in each of the above Financial Years and the disclosure of names has only been made for such customers who have consented to being named as ten largest customer groups. Remaining names from our ten largest customer groups are not mentioned in this Prospectus due to confidentiality reasons and non-receipt of consents for naming them as ten largest customer groups.

While we have maintained longstanding relationships with several of our largest customer groups, we cannot assure you that we will be able to maintain or increase business from these customer groups. We have experienced a decrease in revenue from one of our largest customer groups, Hasbro, between the Financial Years 2023 and 2024, primarily due to a decrease in their overall volume of consumer products sold, which in turn led to a decrease in volume of products within the Consumer Segment purchased from us. For the six months period ended September 30, 2025 and 2024, and the Financial Years 2025, 2024 and 2023, our revenue from Hasbro was ₹248.65 million, ₹352.23 million, ₹611.21 million, ₹1,166.80 million and ₹1,431.78 million, aggregating to

4.63%, 7.67%, 6.61%, 12.09% and 17.63% respectively, of our revenue from operations.

3. Our contractual arrangements with our OEM customer groups are typically requirement-based contracts which do not obligate our customers to place a fixed quantity of orders with us within a fixed time frame, and any termination of such contracts or decline in the production requirements of any of our customers, may adversely affect our business, results of operations, financial condition and cash flows.

We have developed longstanding relationships with our OEM customer groups, servicing a total of 15 OEM customer groups globally as of September 30, 2025, for a range of products within the Aerospace Segment and Consumer Segment. Our average years of relationship with 10 largest customer groups is 11 years. We enter into agreements with our OEM customer groups for specific products, which include general terms of sale, product specification requirements pricing policy and supply schedule, but such agreements do not obligate our customers to place an order with us. Actual orders are based on purchase orders issued by our OEM customers from time to time. However, such orders may be amended or cancelled prior to finalization, and should such an amendment or cancellation take place, it may adversely impact our supply schedules. While we have experienced reduction in quantities manufactured (including due to cancellation in orders by OEM customers) in the past, as a result of the adverse impact of the COVID-19 pandemic towards the global aerospace industry, we have not faced any other instances of reduction in quantities manufactured that materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the Financial Years 2025, 2024 and 2023. However, we are exposed to the risk that our OEM customers might place less-than-expected orders or may even cancel existing orders or make changes to their policies in the future, which may result in reduced quantities being manufactured by us for our customers.

We typically commit to ordering raw materials from our suppliers based on our customer recommendations, 39forecasts and orders. Cancellation by customers or any delay or reduction in their orders can result in a mismatch between the inventory of raw materials and the manufactured products that we hold as part of our inventory. This could affect the orderly management of our inventory and potentially impact our supply schedule. In addition, we make significant decisions, including establishing capabilities and production lines to develop products that meet our customers’ niche product requirements, determining the levels of business that we will seek and accept, supply schedules, raw material procurement commitments, personnel requirements and other resource requirements, based on our estimates of customer orders. This may require us to increase staffing, increase capacity and incur significant expenses to meet the anticipated demand and niche product requirements of our customers. While we have not faced any such instances of being unable to realize our purchase costs that have materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the past three Financial Years, we cannot assure you that we will be able to realize the value of purchases made by us on the basis of such contractual arrangements and any such loss may have an adverse effect on our business, results of operations, financial condition and cash flows.

4. Our business requires significant capital expenditure to maintain or upgrade equipment and machinery across our existing manufacturing clusters and facilities. If we are unable to have access to capital, it may adversely affect our business, results of operations, financial condition and cash flows.

Our business requires significant capital expenditure, and we require a significant amount of capital to maintain or upgrade equipment and machinery across our existing manufacturing clusters and facilities, and develop the required systems and production lines to manufacture new products for our customers. We have in the past and will in the future continue to make substantial investments in property, plant and equipment, particularly towards the addition of plant and machinery as part of our segment expansion plans, including to upgrade our existing equipment and machinery to meet our customers’ evolving requirements. Our primary source of funding towards such investments in property, plant and equipment is from a combination of internal accruals, equity and debt.

Our inability to procure capital required in a timely manner may lead to a delay in our operations such as, among others, upgrading equipment at the units in the manufacturing clusters we operate in and facilities, product diversification and enhancement of technological initiatives, which may lead to losses on account of cost viability and loss of market opportunities. We have not experienced any such delays in procurement of capital required for our operations which adversely affected our business, results of operations, financial condition and cash flows for six months period ended September 30, 2025 and the past three Financial Years. The table below sets forth our capital expenditure for the periods/years indicated:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Acquisition of property, plant and equipment / payment for 1,999.37 1,221.84 2,651.62 1,818.07 856.10 property, plant and equipment (₹ in million) Acquisition of property, plant and equipment / payment for 37.22 26.62 28.68 18.84 10.54 property, plant and equipment, as a percentage of revenue from operations (%) Our future capital requirements may differ from estimates due to a number of factors, including unforeseen delays or time and cost overruns, unanticipated expenses, regulatory changes in India or abroad where our facilities are located, economic conditions and technological changes, pursuant to which we may utilize our cash generated from our business, or avail additional financing through incurrence of debt, issuance of equity securities or a combination of both. If we decide to raise additional funds through the issuance of debt, our interest and debt repayment obligations will increase, which may have a significant effect on our profitability and cash flow. We may also become subject to additional restrictive covenants in our financing agreements, which could limit our ability to access cash flows from operations. For details, see “- Our inability to meet our obligations, including financial and restrictive covenants, under our financing arrangements could adversely affect our business, results of operations, financial condition and cash flows” and “Financial Indebtedness” on pages 72 and 577, respectively. Any issuance of equity, on the other hand, would result in a dilution of the shareholding of existing shareholders. If any of the foregoing were to occur, we may be forced to delay our expansion plans, downsize or abandon such plans, and our business, results of operations, financial condition and cash flows may be adversely affected.

405. While we intend to use a portion of the Net Proceeds to purchase and install machinery and equipment for our Company and our Subsidiary, AeroStructures Manufacturing India Private Limited, to expand our existing capacities, we cannot assure you that we will be able to maintain the existing levels of capacity utilization within the segments of our manufacturing clusters we operate in or facilities, which may adversely affect our results of operations. Further, a slowdown or shutdown in our manufacturing operations could have an adverse effect on our business, results of operations, financial condition and cash flows.

We operate units in three manufacturing clusters in India and have two manufacturing facilities in France and the U.S. We may not be able to maintain the existing levels of capacity utilization within the segments of the units in the manufacturing clusters we operate in or facilities in the future, which may adversely affect our results of operations. Information relating to the installed manufacturing capacity, actual production and capacity utilization of the segments within the units in the manufacturing clusters in which we operate and facilities included in this

Prospectus are as set out below:

Segment For the six months period ended September 30, For the six months period ended September 30, 2025 2024 Installed Actual Capacity Annual Actual Capacity Capacity (in Production (in Utilization (%) Installed Production (in Utilization (%) machining/ machining/ Capacity (in machining/ molding hours) molding hours) machining/ molding hours) molding hours) Aerospace (India)* 740,944 489,025 66.00% 709,825 469,482 66.14% Aerospace (France)1 80,712 19,938 24.70% 77,112 20,119 26.09% Aerospace (USA)2 68,640 9,852 14.35% 68,112 10,851 15.93% Consumer (India) 3 566,888 116,884 20.62% 510,525 106,798 20.92% Segment Financial Year 2025 Financial Year 2024 Financial Year 2023 Installed Actual Capacity Annual Actual Capacity Annual Actual Capacity Capacity Production Utilization Installed Production Utilization Installed Production Utilization (in (in (%) Capacity (in (%) Capacity (in (%) machining/ machining/ (in machining/ (in machining/ molding molding machining/ molding machining/ molding hours) hours) molding hours) molding hours) hours) hours) Aerospace 1,431,232 952,179 66.53% 1,374,015 845,404 61.53% 1,347,204 720,803 53.50%

(India)* Aerospace 152,958 42,694 27.92% 152,958 39,523 25.84% 161,424 33,053 20.48%

(France)1 Aerospace 135,168 19,561 14.47% 136,224 21,601 15.86% 135,696 22,430 16.53%

(USA)2 Consumer 1,199,700 204,825 17.07% 1,204,988 367,021 30.46% 1,155,412 320,824 27.77%

(India) 3 *Aerospace (India) includes Aerostructure Manufacturing India Private Limited, one unit in Aequs Limited (standalone), AeroStructures Assemblies India Private Limited, Aerospace Processing India Private Limited, SQuAD Forging India Private Limited – all facilities at Belagavi, Karnataka 1 Aerospace (France) includes Aequs Aerospace France SAS in Cholet, France 2 Aerospace (USA) includes Aequs Aero Machine Inc., in Paris, Texas, USA 3 Consumer (India) includes Aequs Consumer Products Private Limited and Aequs Cookware Private Limited in Hubballi, Karnataka, Aequs Engineered Plastics Private Limited and Aequs Force Consumer Products Private Limited in Belagavi, Karanataka, Aequs Toys Private Limited and Koppal Toys Molding COE Private Limited in Koppal, Karnataka

Notes:

Annual Installed Capacity has been calculated assuming 8 days of closure of plant and 3 days of closure for planned preventive maintenance Annual Installed Capacity has been calculated assuming 22 working days in a month For further details on the manufacturing clusters that we operate in and facilities “Our Business – Description of Our Business – Manufacturing Clusters and Facilities” on page 312.

The capacity of our Consumer Segment has historically been underutilized, as set out in the table above, primarily due to fluctuations in demand for consumer products, including as a result of project-specific orders as well as volatile order volumes by customers. For example, a decrease in demand for consumer products, between the Financial Years 2023 and 2025, had led to a decrease in net external revenue from the Consumer Segment to ₹999.65 million for the Financial Year 2025 from ₹2,269.50 million for the Financial Year 2023. Given the long- term nature of our business, our global OEM customers typically expect and require us to have sufficient capacity 41for large scale production, before placing orders with us. Due to relatively weak demand for our consumer products in Financial Year 2025, our capacity utilization rates in the Consumer Segment have also decreased from Financial Years 2024 to 2025. In the Aerospace Segment, post the COVID-19 pandemic, our capacity utilization has been gradually increasing between the Financial Years 2023 and 2025 across our India and France manufacturing clusters/facilities.

The units in the manufacturing clusters we operate in and facilities and their capacity utilization rate may be affected by, among other things, breakdown of our machinery at the units in the manufacturing clusters we operate in or facilities, interruption in the supply of power and water, obsolescence of equipment or machinery, labour disputes, political and civil unrest, natural disasters and severe weather conditions, industrial accidents and productivity of our workforce. Further, under-utilization of our manufacturing capacities over extended periods, or significant under-utilization in the short term, could also adversely affect our business and results of operations.

While we have not faced any instances of disruptions to the units in the manufacturing clusters we operate in and facilities that have materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the past three Financial Years, we cannot assure you that there will not be any shutdown, slowdown or disruption in the operations of the units in the manufacturing clusters we operate in and facilities in the future. Our inability to effectively respond to any shutdown or slowdown and rectify any disruption, in a timely manner and at an acceptable cost, could lead to our inability to meet customers’ demand for our products and to manufacture our products in a cost-efficient manner.

6. Our business is subject to fluctuations in the prices and disruptions in the availability of raw materials, which may have an adverse effect on our business, results of operations, financial condition and cash flows.

We rely on third-party suppliers for the supply of raw materials, including aluminium, stainless steel and titanium, in the manufacturing of our products. We source our raw materials on a purchase order basis, and enter into long term contracts with suppliers on a need basis. For details, see “Our Business – Description of Our Business – Raw Materials and Suppliers” on page 317. Notably, a significant portion of our expenses is attributed to the cost of raw materials, as set out in the table below for the periods/years indicated:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Cost of materials consumed (₹ in million) 2,328.94 2,285.19 4,082.60 4,390.72 4,168.95 Cost of materials consumed, as a percentage of total 48.37 54.71 47.96 52.10 53.62 expenses (%) Pursuant to the terms of our purchase orders with certain customers, we are contractually permitted to pass through increases in the cost of raw materials to such customers on a quarterly or half-yearly basis. Such pass-throughs are facilitated by prior approval from customers regarding the prices at which raw materials are procured. As a result, our exposure to raw material cost fluctuations is primarily limited to short-term adverse effects on our cash flows, as payment for products is generally received post-delivery. In each of the six months period ended September 30, 2025 and the three preceding Financial Years, we have not encountered any fluctuations in raw material costs that have had a material adverse effect on our results of operations or cash flows.

Delay in making payments to our suppliers may adversely affect the timely availability of critical raw materials, disrupt our manufacturing operations and materially affect our business, results of operations, financial condition and cash flows. Further, disruptions in the availability of quality raw materials from suppliers may lead to a deterioration in quality of our products, as the quality of our products is primarily derived from the quality of our raw materials. The table below sets forth details relating to our suppliers for the periods/years indicated:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Number of suppliers engaged 632 676 892 731 751 Total value of goods purchased from ten largest 967.20 1,145.20 1,789.75 2,191.30 2,090.92 suppliers by amounts incurred (₹ in million) Total value of goods purchased from ten largest 40.48 43.11 40.17 47.14 44.25 suppliers by amounts incurred, as a percentage of total purchases (%) 42The availability of quality raw materials is affected by several factors, including production capacity constraints, trade restrictions, import tariffs and geopolitical factors that impact supply chain operations. Several military conflicts globally have resulted in market disruptions, including volatilities in stock markets, recession and global inflation. The overall economic downturn and global uncertainty and instability have caused disruptions to the global supply chain. Some of the critical equipment used in our manufacturing clusters, we operate in, is sourced from China and any disruptions in supply chains involving China could adversely impact our business, financial condition and results of operations. Set forth below is the country-wise bifurcation of our raw material imports, for the periods/years indicated:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Cost of materials sourced from suppliers 204.17 370.86 601.65 550.25 543.33 located in Germany (₹ in million) Cost of materials sourced from suppliers 15.61 28.31 26.95 23.55 26.61 located in Germany, as a percentage of total cost of materials imported (%) Cost of materials sourced from suppliers 194.53 231.00 362.74 422.09 473.46 located in USA (₹ in million) Cost of materials sourced from suppliers 14.88 17.63 16.25 18.07 23.19 located in USA, as a percentage of total cost of materials imported (%) Cost of materials sourced from suppliers 97.73 107.36 188.44 327.04 231.48 located in Taiwan (₹ in million) Cost of materials sourced from suppliers 7.47 8.20 8.44 14.00 11.34 located in Taiwan, as a percentage of total cost of materials imported (%) Cost of materials sourced from suppliers 241.63 81.03 202.53 176.61 146.90 located in United Kingdom (₹ in million) Cost of materials sourced from suppliers 18.48 6.19 9.07 7.56 7.20 located in United Kingdom, as a percentage of total cost of materials imported (%) Cost of materials sourced from suppliers 197.39 143.24 264.97 183.55 125.00 located in France (₹ in million) Cost of materials sourced from suppliers 15.09 10.93 11.87 7.86 6.12 located in France, as a percentage of total cost of materials imported (%) Cost of materials sourced from suppliers 23.36 176.95 258.26 453.45 318.40 located in other SEZs within India* (₹ in million) Cost of materials sourced from suppliers 1.79 13.51 11.57 19.39 15.60 located in other SEZs within India*, as a percentage of total cost of materials imported (%) Cost of materials sourced from suppliers 348.88 199.53 354.26 223.08 202.98 located in other countries** (₹ in million) Cost of materials sourced from suppliers 26.68 15.23 15.87 9.55 9.94 located in other countries**, as a percentage of total cost of materials imported (%) Total cost of materials imported (₹ in 1,307.69 1,309.97 2,232.85 2,336.07 2,041.56 million) Total cost of materials imported, as a 100.00 100.00 100.00 100.00 100.00 percentage of total cost of materials imported (%) *As SEZs are treated as foreign territories in India, any materials supplied to us by other SEZs located in India are also considered as imports.

** Includes China, Hungary, Hong Kong, Switzerland, Singapore, Thailand, Japan, Israel, Turkey, Romania, United Arab Emirates, South Korea, Spain, Belgium, Netherlands, Sweden, Canada, Poland, Vietnam, Mexico, Malaysia and Italy.

For further details, see “Our Business – Description of our Business – Raw Materials and Suppliers” on page

317.

While we maintain a diversified supplier base and we do not rely on a limited number of suppliers for the supply 43of our raw materials, we cannot assure you that we will be able to maintain our current line-up of suppliers or adequate supply of quality raw materials at all times. Further, our suppliers do not supply raw materials exclusively to us and accordingly, some of them may choose to supply to other parties, including our competitors, instead of us. While there have not been instances of unforeseen shortage or quality concerns for the six months period ended September 30, 2025 and the past three Financial Years that have materially and adversely affected our cash flows, the non-availability or unforeseen shortage or quality raw materials may force us to source raw materials from alternative suppliers that may not meet our or our customers’ stringent quality standards, which may lead to a deterioration in quality of our products and in turn affect our business, results of operations, financial condition and cash flows.]

7. All the units in the manufacturing clusters that we operate in, in India are located in the state of Karnataka, which may expose us to regional risks that could adversely affect our business, results of operations, financial condition, and cash flows.

We operate units in three manufacturing clusters in India, Belagavi Manufacturing Cluster, Hubballi Manufacturing Cluster and Koppal Manufacturing Cluster all situated in the state of Karnataka. The concentration of the units in the manufacturing clusters that we operate in, in the state of Karnataka exposes us to regional risks and adverse events specific to the state. These regional risks include disruptions to infrastructure, significant natural disasters, workforce disruptions, changes in general economic and political conditions, civil unrest, the regulatory environment, and local government policies, among others. While we have not faced any instances of disruptions to our infrastructure or workforce disruptions due to regional risks that have materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the past three Financial Years, we cannot assure you that we will not face any such infrastructure or workforce disruptions due to regional risks in the operations of units in the manufacturing clusters and facilities in the future.Furthermore, incidents such as earthquakes, floods, typhoons, or other events that impact the operations of any or all of the units in the manufacturing clusters we operate in, in the state of Karnataka could significantly disrupt the production of our products. In such circumstances, we may need to rely on alternative resources such as our two manufacturing facilities in France and the U.S., or we may need to establish new manufacturing facilities, to manufacture our products. However, we may not be able to do so in a timely and cost-efficient manner, or at all, and any failure to comply with the regulations could result in fines, penalties, or other sanctions, which could materially and adversely affect our business or results of operations.

The regulatory landscape in Karnataka includes state-specific labour laws, environmental regulations, safety standards, and other local governmental policies that could impact our operations. Changes or developments in these regulations could impose additional compliance costs, restrict our operational flexibility, or require significant modifications to our manufacturing processes. While we strive to maintain compliance with all applicable regulations, we cannot assure you that we will be able to adapt to new regulatory requirements in a timely or cost-effective manner. Any failure to comply with these regulations could result in fines, penalties, or other sanctions, which could materially and adversely affect our business or results of operations.

8. Our Company and certain of our Subsidiaries have had negative operating cash flows in the past and may continue to have negative operating cash flows in the future, which could adversely affect our results of operations and financial condition.

We have experienced negative operating cash flows in the past and we may continue to experience negative operating cash flows in the future. The following tables summarize our cash flows (on a consolidated basis and for our Subsidiaries that have experienced negative operating cash flows) during the periods/years indicated:

Our Company, on a consolidated and restated basis, as per the Restated Consolidated Financial Information:

Particulars For the six months Financial Year period ended September 30, 2025 2024 2025 2024 2023 (₹ in million) Net cash generated/(used in) from operating activities 479.02 (117.27) 261.41 (191.08) 98.11 44Our Subsidiaries:

Particulars Financial Year 2025 2024 2023 (₹ in million) Aerospace Manufacturing Holdings Private Limited Net cash (used in)/generated from operating activities (0.58) (8.40) (0.49) AeroStructures Assemblies India Private Limited Net cash (used in)/generated from operating activities (91.28) 149.60 21.95 Aequs Oil and Gas LLC Net cash (used in)/generated from operating activities (1.66) (1.00) (6.36) Aequs Force Consumer Products Private Limited Net cash (used in)/generated from operating activities 24.00 (222.97) (82.20) Aequs Consumer Products Private Limited Net cash (used in)/generated from operating activities 90.75 (205.50) (119.73) Aequs Toys Private Limited Net cash (used in)/generated from operating activities (62.04) (146.47) (49.96) Aequs Engineered Plastics Private Limited Net cash (used in)/generated from operating activities (2.00) 63.40 (75.28) Aequs Aerospace BV, Netherlands Net cash (used in)/generated from operating activities (106.84) (243.86) (115.25) Aequs Toys Hong Kong Private Limited Net cash (used in)/generated from operating activities N.A.# 0.09 (4.29) Aequs Aero Machine Inc Net cash (used in)/generated from operating activities (59.71) 144.85 14.22 Aequs Aerospace France SAS*** Net cash (used in)/generated from operating activities 11.67 (100.29) (209.23) Koppal Toys Molding COE Private Limited Net cash (used in)/generated from operating activities (54.86) (66.80) 105.37 Aequs Rajas Extrusion Private Limited Net cash (used in)/generated from operating activities (0.11) (1.70) 0.15 Aequs Home Appliances Private Limited (struck off)** Net cash (used in)/generated from operating activities (0.05) (0.00) (45.23) * The table only includes our Subsidiaries which have had negative operating cash flows in one or more years during the past three Financial Years.

** Aequs Home Appliances Private Limited has been struck off from the Registrar of Companies, Karnataka at Bengaluru with effect from June 27, 2025, and has been dissolved. *** Financial statements for Aequs Aerospace France SAS have not been prepared as per Ind AS.

# The sole director of ATHPL through resolution dated July 15, 2025 has approved the process of winding up of ATHPL and appointment of liquidators in this regard.

We had negative cash flows from operating activities (on a consolidated and restated basis) during the Financial Years 2024, because the net cash used in operating activities was ₹191.08 million for the Financial Year 2024. We had loss before tax of ₹42.78 million for the Financial Year 2024, which was primarily adjusted for depreciation and amortisation expense of ₹1,076.85 million, finance cost of ₹638.06 million. This was further adjusted for working capital changes, including an increase in inventories of ₹556.05 million, an increase in other assets (current and non-current) of ₹211.09 million, an increase in trade receivables of ₹309.23 million, and a decrease in other liabilities (current and non-current) of ₹130.44 million. As a result, cash used in operations for the Financial Year 2024 was ₹150.41 million, before adjusting for ₹40.67 million of income taxes paid (net of refunds). Our operating cashflow was negative for the Financial Year 2024, primarily due to our loss before tax and increase in working capital balances during the Financial Year 2024.

Further, we had negative cash flows from operating activities (on a consolidated and restated basis) during the six months period ended September 30, 2024 because the net cash used in operating activities was ₹117.27 million for the six months period ended September 30, 2024. We had loss before tax of ₹659.95 million for the six months period ended September 30, 2024, which was primarily adjusted for depreciation and amortisation expense of ₹529.20 million, impairment loss on goodwill of ₹482.65 million, finance cost of ₹269.11 million and provision for slow moving inventory of ₹167.28 million. This was further adjusted for working capital changes, including increase in inventories of ₹803.03 million, increase in trade payables of ₹327.09 million, increase in trade receivables of ₹232.79 million and increase in contract liabilities of ₹182.67 million. As a result, cash used in operations for the six months period ended September 30, 2024 was ₹9.52 million, before adjusting for ₹107.75 million of income taxes paid (net of refunds).

We cannot assure you that our net cash flows will be positive in the future. For further details, see “Management’s 45Discussion and Analysis of Financial Condition and Results of Operations – Cash Flows” on page 569.

Our negative cash flows may continue in future periods, particularly as we continue to develop the required systems and production lines to manufacture new products for our customers. Any failure to increase our revenue sufficiently to keep pace with our investments and other expenses could prevent us from achieving positive cash flow on a consistent basis. If we are unable to successfully address these risks and challenges, or if we are unable to adequately manage our cash flows, we may not be able to adequately fund our operations, pay debts in a timely manner or finance proposed business expansions or investments. Any of the foregoing could adversely affect our business, cash flows, financial condition and results of operations.

9. A downgrade in our credit rating could adversely affect our ability to raise capital in the future.

We have received the following credit ratings on our debt and credit facilities as of September 30, 2025, March 31, 2025, 2024 and 2023:

Particulars As of September 30, As of March 31, Long term 2025 2025 2024 2023 facilities/Short term facilities Company CARE BBB- BBB- - - Long term bank facilities Infomerics - - - BBB- Long term bank facilities Subsidiaries ACPPL CARE BBB- BBB- - - Long term bank facilities Long term/short term bank facilities Infomerics - - - BBB- Long term bank IVR A3 facilities Short term bank facilities API CARE BBB- BBB- - - Long term bank facilities Infomerics - - - BBB- Long term bank facilities ASMIPL CARE BBB BBB - - Long term bank BBB BBB facilities Long term/short term bank facilities Infomerics - - - BBB- Long term bank IVR A3 facilities Short term bank facilities AEPPL CARE BB+ BB+ - - Long term bank BB+ BB+ facilities Long term/short term bank facilities Infomerics - - - BBB- Long term bank IVR A3 facilities Short term bank facilities SQuAD CARE BBB- BBB- - - Long term bank CARE A3 CARE A3 facilities Short term bank facilities Infomerics - - - BBB- Long term bank IVR A3 facilities Short term bank facilities 46Our credit ratings, which are intended to measure our ability to meet our debt obligations, are a significant factor in determining our finance costs. The interest rates of certain of our borrowings may be significantly dependent on our credit ratings. While there has not been a downgrade in our credit ratings for the six months period ended September 30, 2025 and the past three Financial Years, any future downgrade of our credit ratings could lead to greater risk with respect to refinancing our debt and would likely increase our cost of borrowing and adversely affect our business, results of operations, financial condition, cash flows and future prospects.

10. Our business and results of operations may be adversely affected if we are unable to maintain or improve capacity utilization following the installation of additional plant and machinery from the proceeds of the Offer.

We intend to utilise a portion of the Net Proceeds from the Offer for funding capital expenditure towards the purchase and installation of additional plant and machinery for our Company and our Subsidiary, AeroStructures Manufacturing India Private Limited. For further details, see “Objects of the Offer - Funding the capital expenditure to be incurred on account of purchase of machinery and equipment by (a) our Company; and (b) one of our wholly-owned Subsidiaries, ASMIPL, through investment in such Subsidiary” on page 156. While these investments are expected to enhance our production capabilities and enable us to cater to the anticipated demand from our global OEM customers, there can be no assurance that such additional capacity will be effectively absorbed or that we will be able to achieve optimal utilization levels in a timely manner.

Historically, our Company and certain of our Subsidiaries have maintained moderate capacity utilization across facilities, as we retain a buffer to accommodate bespoke and accelerated manufacturing requirements of our customers. However, following the proposed expansion, if actual demand falls short of our expectations or if there are delays in stabilizing production on the new equipment, we may experience underutilization of capacity. This may adversely affect our margins and return on capital employed, as fixed costs associated with the new plant and machinery will continue to be incurred regardless of utilization levels.

Further, any slowdown or disruption in our Subsidiaries’ operations, including due to regulatory approvals, supply chain constraints, or lower order inflows, may result in lower capacity utilization and, consequently, it may negatively affect our business, results of operations, financial condition and cash flows.

11. The units in the manufacturing clusters we operate in and facilities are subject to periodic inspections and audits by regulatory authorities. We may be recipient of adverse observations from such visits which may damage our business and reputation leading to an adverse effect on our business, results of operations, financial condition and cash flows.

As a manufacturer of products within the Aerospace Segment and Consumer Segment, we are required to comply with the regulations and quality standards stipulated by the regulatory authorities in India, the U.S., France, and the countries to which we export our products. We are required to comply with global practice standards such as the International Organization for Standardization. The units in the manufacturing clusters we operate in are also subject to periodic inspections and audits by the Department of Factories, Government of Karnataka in India.

Except as stated below, we have not had any adverse observations from regulatory authorities for six months period ended September 30, 2025 and the Financial Years 2025, 2024 and 2023 and we cannot assure you that we will continue to not have any adverse observations from the regulatory authorities in the future. Since incorporation, our Company has received 20 letters/ notices from various regulatory authorities at different times, including, from the Employees’ State Insurance Corporation, Employees’ Provident Fund Organisation, Ministry of Corporate Affairs, Department of Labour, Department of Factories, Boilers, Industrial Safety and Health, the terms of which our Company had duly complied with, and are no longer pending before any regulatory authority.

Further, the Reserve Bank of India, Bangalore (“RBI Bangalore”) issued a compounding order dated April 7, 2020, for a delay in reporting receipt of foreign inward remittance towards subscription to equity, and submission of the subsequent Form FC-GPR in this regard. Our Company has paid the penalty levied, and has received a certificate of payment dated June 16, 2020, from the RBI Bangalore. Further, the RBI Bangalore issued a show cause notice dated September 23, 2022 (“SCN”), to our Company under the Foreign Exchange Management Act (Export of Goods and Services) Regulations, 2015 for failure to realize and repatriate the aggregate value of goods/ software exported and placed our Company in the caution list of exporters. Our Company duly complied with the SCN, and the caution list proceedings were subsequently withdrawn by the RBI Bangalore. The table below sets forth details of the inspections and audits by regulatory authorities at the units in the manufacturing clusters we operate in and facilities, during the periods/years indicated:

47Year of Name of regulatory Key observations Corrective steps taken by our inspection authority Company and audit Belagavi Manufacturing Cluster For the six - - - months period ended September 30, 2025 Financial - - - Year 2025 Financial Department of To increase the number of beds in the We have maintained the occupational Year 2024 Factories, Boilers occupational health centre and the health centre with basic emergency Industry Safety and availability of basic emergency drugs and committed to increasing the Health drugs; maintenance of Form 16 in maintained drug quantities and the hard copies in addition to maintaining number of beds, as required. Further, them in soft copies. Form No. 16 is currently maintained in soft copy, and we have requested for approval to continue to maintain the Form No. 16 soft copy under the IT Act, with an undertaking that the hard copies of the Form No. 16 will be produced when required.

Financial Department of To train employees to operate forklift We have trained our employees to Year 2023 Factories to handle loading and unloading safely operate forklifts and have operations; to provide respiratory obtained their vision and medical masks to all operators working in the clearance. Additionally, we have spray painting section to prevent provided respiratory masks to all inhalation of harmful chemicals operators working in the spray present in the paint. painting section to safeguard against harmful chemical inhalation.

To improve the safety system with We have provided chairs with respect to the screwing machine; to backrests, monitored and ensured improve and monitor cleanliness and shop floor cleanliness, and will neatness of the factory shop floor. enhance screwing machine safety.

We have instructed the supervisors to keep the windows open, and conducted awareness programs to promote crèche usage among women workers.

To educate employees regarding We have educated our employees on hazardous work processes; to ensure hazardous work processes and proper precautions are taken to displayed bilingual SOPs and safety prevent accidents while lifting and placards. Additionally, proper loading heavy materials into the CNC precautions are being ensured to machines. prevent accidents during lifting and loading of heavy materials into the CNC machines.

Koppal Manufacturing Cluster For the six - - - months period ended September 30, 2025 Financial - - - Year 2025 Financial - - - Year 2024 Financial Department of To provide temporary electrical We have ensured that all temporary Year 2023 Factories installations with earth leakage circuit electrical installations are provided breakers and decongestion around the with earth leakage circuit breakers electric panel board. and we have placed rubber mats in front of electrical panel boards.

Additionally, the congestion around the electrical panel board has been cleared to maintain easy access.

48Year of Name of regulatory Key observations Corrective steps taken by our inspection authority Company and audit To install fume extraction system in We have completed the installation of the paint booths; to facilitate of the fume extraction system for our pressure vessels, pipeline and lifting paint booths. We have also conducted tools and tackles by an expert. an inspection of pressure vessels, pipelines and lifting tools, through a competent person, and the test results will be submitted when available.

Hubballi Manufacturing Cluster For the six Department of To implement changes in proposed We have made the required months period Factories layout, including introducing new corrections and submitted the revised ended assembly line, new training room, factory layout for approval. Factory September 30, new workstation, and new product plan was approved on October 8, 2025 introduction area. 2025.

Canteen facility was provided with Plan prepared to expand the canteen dining hall seating capacity for 170 facility from 170 to 250 seater workers and the same needs to be capacity. enhanced to accommodate at least 30% of the workers working at a time, as required under Rule 94 of the Karnataka Factories Rules 1969.

Creche facility (childcare facility) has Awareness conducted for women been provided in the premises. employees about the availability of However, during the inspection visit, creche facility. no children were present in the creche facility. Thus, the workers need be educated about the availability of creche facility.

Financial Year - - - 2025 Financial Year - - - 2024 Financial Year - - - 2023 We have not received any adverse observation from any regulator for our units in the Cholet Facility and Texas Facility for the six months period ended September 30, 2025 and the past three Financial Years.

If we are not in compliance with the requirements prescribed by such authorities, we may be subject to regulatory actions, including issuance of warning letters, imposition of sanctions, amendment or withdrawal of our existing approvals, interruption of our operations, or claims resulting from non-compliance with contractual obligations.

Any such actions may adversely affect our business, results of operations, financial condition and cash flows.

12. Our inability to effectively execute our business plan and growth strategies could adversely affect our business, results of operations, financial condition and cash flows.

Our business has demonstrated growth in the past with our revenue from operations increasing between the six months period ended September 30, 2024 and 2025 and between the Financial Year 2023 and 2025, as set out in

the table below:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Revenue from operations (₹ in million) 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 Year-on-year / Period-on-period increase in revenue 17.03 NA* (4.19) 18.83 NA* from operations (%) * Not applicable as the revenue from operations for the prior year is not included in this Prospectus.

Our growth strategies, including to increase wallet share with our existing customers by moving up the manufacturing value chain and diversify customer base in the Aerospace Segment, and grow our portfolio of consumer products, may require us to expend additional capital as we continue to invest in the establishment of 49new production lines and the development of new R&D initiatives. We cannot assure you that we will be able to maintain our growth at historical levels or successfully implement our business plan and growth strategy in the future. For details, see “Our Business – Our Strategies” on page 302.

We may not be able to successfully achieve our business plan and strategy in the future due to a variety of reasons, many of which are beyond our control, including a decline in demand for products within the Aerospace Segment and Consumer Segment, increased price competition, inability to keep up with latest technology and processes, lack of availability of quality raw materials or a general slowdown in the economy. Moreover, if we are unable to expand our product offerings and attract new customers or retain existing customers, we may not be able to sustain our historical growth rates, which may adversely affect our business, results of operations, financial condition and cash flows.

13. We have incurred losses of ₹(169.77) million, ₹(717.00) million, ₹(1,023.46) million, ₹(142.44) million and ₹(1,094.95) million for the six months period ended September 30, 2025 and 2024, and the Financial Years 2025, 2024 and 2023, respectively and we have made provisions for impairment of goodwill in our Subsidiaries. We may continue to experience losses in the future and may be required to make similar provisions for impairment, which could result in an adverse effect on our business, results of operations, financial condition and cash flows.

We have incurred losses in the past, details of which are set out below for the periods/years indicated:

Particulars For the six months period ended Financial Year September 30, 2025 2024 2025 2024 2023 Loss for the period/year (169.77) (717.00) (1,023.46) (142.44) (1,094.95) For further details, see “Management’s Discussion and Analysis of our Financial Condition and Results of Operations” on page 539. Notably, during the financial year ended March 31, 2025, we incurred an exceptional item gain/(loss) comprising impairment loss on goodwill amounting to ₹482.65 million. In addition, when we become a listed company, we will incur significant additional legal, accounting and compliance costs. These efforts may be more costly than we expect and may not result in corresponding increased revenue or growth in our business. Any failure to increase our revenue sufficiently and other expenses could prevent us from achieving profitability on a consistent basis. If we are unable to successfully address these risks and challenges, or if we are unable to generate adequate revenue growth, we may continue to incur significant losses in the future, which could adversely affect our business, results of operations, financial condition and cash flows.

14. Certain of our Subsidiaries have incurred losses in the past and may continue to experience losses in the future, which in turn may result in an adverse effect on our business, results of operations, financial condition and cash flows.

Certain of our Subsidiaries have incurred losses in the past, details of which are set out below for the years

indicated:

Financial Year Particulars 2025 2024 2023 ASMIPL Profit / (loss) before tax (₹ million) 378.33 615.86 (101.23) AMHPL Profit / (loss) before tax (₹ million) 2.26 (32.85) (6.51) AFCPPL Profit / (loss) before tax (₹ million) (214.28) (246.98) (299.07) ACPPL Profit / (loss) before tax (₹ million) (125.33) (260.30) (177.14) ATPL Profit / (loss) before tax (₹ million) (317.17) (396.44) (114.35) AHAPL Profit / (loss) before tax (₹ million) (43.78) (0.13) (3.70) 50Financial Year Particulars 2025 2024 2023 AEPPL Profit / (loss) before tax (₹ million) (284.74) (97.54) (198.00) KTMCPL Profit / (loss) before tax (₹ million) (96.09) (149.17) (58.96) AREPL Profit / (loss) before tax (₹ million) (1.78) (1.83) (2.12) AHF Profit / (loss) before tax (₹ million) 49.45 (62.45) (52.43) AAF Profit / (loss) before tax (₹ million) 10.49 (43.25) (63.84) ATHPL Profit / (loss) before tax (₹ million) NA# (0.32) 1.92 AOG Profit / (loss) before tax (₹ million) 0.00 (0.07) (2.10) AABV Profit / (loss) before tax (₹ million) (1,481.74) (279.26) (114.43) AAM Profit / (loss) before tax (₹ million) (20.66) 25.86 (134.00) AALLC Profit / (loss) before tax (₹ million) (11.85) 4.20 2.73 *The table only includes our Subsidiaries which have incurred losses in one or more periods/years during the past three Financial Years.

# The sole director of ATHPL through resolution dated July 15, 2025 has approved the process of winding up of ATHPL and appointment of liquidators in this regard...

We may be required to fund the operations of our Subsidiaries in the future and our investments in the Subsidiaries may eventually be written-off, which in turn could subject us to additional liabilities and could have an adverse effect on our Company’s profitability and financial condition. While we have not faced any such instances where our investments in our Subsidiaries were written-off during the six months period ended September 30, 2025 and the past three Financial Years (though some investments have been provided for in the standalone financial statements), we cannot assure you that we will not face such instances in the future, which may have an adverse effect on our business, results of operations, financial condition and cash flows.

15. If we fail to obtain, maintain or renew the statutory and regulatory licenses, permits and approvals required for our business and operations, our business, results of operations, financial condition and cash flows may be adversely affected.

We are required to obtain and maintain certain statutory and regulatory licenses, permits and approvals under central and state government rules and regulations in India, the U.S. and France, generally for carrying out our business and for the units in the manufacturing clusters we operate in and facilities. For example, we are required to obtain and maintain licenses and approvals under, among others, SEZ Act, Foreign Trade Policy, Department of Factories and Boilers Industrial Safety and Health for land use, as well as environmental permits and other operating permits, including consents to establish and operate from central and state, government entities, for operation of the units in the manufacturing clusters we operate in and facilities. For details of applicable regulations and approvals relating to our business and operations, see “Key Regulations and Policies” and “Government and Other Approvals” on pages 327 and 586, respectively.

Our Company and our material subsidiaries currently have the material approvals to carry out and perform our business and operations, however, our approvals may expire from time to time in the ordinary course and we may be required to make applications for such renewals. For further details on material approvals of our Company and Material Subsidiaries, see “Government and Other Approvals –Material Approvals for which applications are pending” on page 588.

While our Company and our Material Subsidiaries will endeavor to renew or obtain such licenses, permits and 51approvals as required (including upon expiry of such licenses, permits or approvals), there can be no assurance that the relevant authorities will issue any such licenses, permits and approvals within our anticipated timeframe or at all. While we have not faced any such instances of being unable to renew, maintain or obtain any licenses, permits or approvals that have materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the past three Financial Years, any inability to renew, maintain or obtain any licenses, permits or approvals in the future may result in the interruption of our operations and have an adverse effect on our business, results of operations, financial condition and cash flows.

Further, certain of our licenses, permits and approvals required by us, including, among others, the consent to operate, in connection with the manufacturing of certain products for specific projects undertaken by our Company, are subject to certain conditions and we cannot assure you that these would not be suspended or revoked in the event of non-compliance or alleged non-compliance with any terms or conditions thereof, or pursuant to any regulatory action. While we have not faced any such instances that have materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the past three Financial Years, if there is any failure by us to comply with the applicable regulations or if the regulations governing our business are amended in the future, we may incur increased costs, be subject to penalties, have our licenses, approvals and permits revoked or suffer a disruption in our operations, any of which could adversely affect our business, results of operations, financial condition and cash flows.

16. The examination report issued by our Statutory Auditors, for our Restated Consolidated Financial Information as of and for the Financial Years 2024 and 2023 includes references to certain emphasis of matter.

The examination report on our Restated Consolidated Financial Information as at and for the Financial Years 2024 and 2023, discloses certain emphasis of matter, as set forth below: "Emphasis of Matter We draw attention to Note 9(i) to the consolidated financial statements in relation to a guarantee issued by the Company's subsidiary and certain payments made by the Company's subsidiary under such guarantees on behalf of a foreign subsidiary in respect of which the Company's subsidiary is in discussions with the Authorised Dealer to evaluate the compliance requirements under Foreign Exchange Management Act, 1999 and regulations thereunder (FEMA Regulations), if any. Pending such evaluation, no adjustments have been made to the financial statements.

Our opinion is not modified in respect of this matter.

Other Matter The consolidated financial statements of the Group, its associate and joint ventures for the year ended 31 March 2023 were audited by the predecessor auditor who had expressed an unmodified opinion on 23 September 2023.

a) Auditor’s report issued by Price Waterhouse Chartered Accountants LLP (the “Previous Auditor”) dated 23 September 2023 on the consolidated financial statements of the Group and its associate and joint ventures as at and for the year ended 31 March 2023, as referred in Paragraph 4(c) above, The auditor’s report issued by the Previous Auditor on the consolidated financial statements of the Group and its associate and its joint ventures as at and for the year ended 31 March 2023 included the following Emphasis of Matter paragraph (as referred in Annexure VI of the Restated Consolidated Financial Information):

Emphasis of Matter

(i) We draw your attention to Note 51 in the financial statements regarding the amounts paid by the Company’s subsidiary directly to a bank in India on behalf of a foreign associate entity, aggregating to Rs. 118 million (which has been fully impaired) as at 31 March 2023, for which the Company’s subsidiary has given a guarantee in an earlier year. Subsequent to the year end, the Company’s subsidiary has intimated these transactions to the Authorised Dealer Bank and sought guidance on implications, if any, under The Foreign Exchange Management Act, for which response is awaited.

(ii) We draw your attention to Note 52 in the financial statements regarding non-settlement of foreign currency payables amounting to Rs. 1 million as at 31 March 2023 which are due for more than three years and Rs. 7 million as at 31 March 2023 which are outstanding for more than six months but less 52than three years from the date of imports. This is beyond the period stipulated under the Reserve Bank of India Master Direction on Import of Goods and Services vide FED Master Direction No. 17/2016-17 dated 1 January 2016 (as amended). The Company’s subsidiary has made necessary application to the Authorised dealer Bank, seeking approval from RBI for extension of time limit to settle the outstanding amount.

(iii) We draw your attention to Note 53 in the financial statements regarding non-settlement of foreign currency payables amounting to Rs. 2 million as at 31 March 2023 which are due for more than three years and Rs. 41 million as at 31 March 2023 which are outstanding for more than six months but less than three years from the date of imports. This is beyond the period stipulated under the Reserve Bank of India Master Direction on Import of Goods and Services vide FED Master Direction No. 17/2016-17 dated 1 January 2016 (as amended). The Company’s subsidiary has made necessary application to the Authorised dealer Bank, seeking approval from RBI for extension of time limit to settle the outstanding amount.

(iv) We draw attention to Note 54 regarding preparation of financial statements of one of the Company’s subsidiary on a realisable value basis for reasons stated therein.

Our opinion is not modified in respect of above matters. (Notes 51, 52, 53 and 54 referred above has been reproduced as Note 46, 47, 48 and 49 respectively to the Restated Consolidated Financial Information in Annexure VI)." There can be no assurance that any such emphasis of matter will not form part of our financial statements in any future financial years, or that such emphasis of matter will not affect our financial results in future financial years.

Any such remarks in the auditor’s report on our financial statements in the future may affect our reputation and the trading price of the Equity Shares, amongst others. For further details, see “Restated Consolidated Financial Information” on page 383.

17. A significant portion of our revenue from operations is derived from direct and indirect exports, with only 11.44%, 12.57%, 10.74%, 12.67% and 11.67% of our revenue from operations being derived from sales within India during six months period ended September 30, 2025 and 2024, and the Financial Years 2025, 2024 and 2023, respectively. Further, our international business exposes us to complex management, legal, tax and economic risks, which could adversely affect our business, results of operations, financial condition and cash flows.

We generate a significant portion of our revenues from indirect and direct exports in international markets. We currently sell our products in 22 international markets, including the U.S., France, Hong Kong, Sweden, United Kingdom and Germany. The tables below set forth our revenue from operations for the periods/years indicated:

Particulars* For the six months period ended September 30, 2025 2024 Amount % of revenue Amount % of revenue (in ₹ million) from operations (in ₹ million) from operations India 614.85 11.44 577.01 12.57 United States of America 1,312.85 24.45 1,119.05 24.38 France 1,312.54 24.44 891.12 19.42 Hong Kong 499.69 9.30 410.39 8.94 Sweden 282.23 5.26 451.96 9.85 United Kingdom 744.60 13.87 504.29 10.99 Germany 317.29 5.91 381.14 8.30 Others 287.54 5.34 254.77 5.55 Total revenue from operations 5,371.59 100.00 4,589.73 100.00 Particulars* Financial Year 2025 Financial Year 2024 Financial Year 2023 Amount % of Amount % of Amount % of (in ₹ million) revenue (in ₹ million) revenue (in ₹ revenue from from million) from operations operations operations India 985.96 10.74 1,223.10 12.67 947.63 11.67 United States of America 2,130.92 23.02 1,862.50 19.30 1,644.47 20.25 France 2,044.82 22.11 1,709.75 17.72 1,517.34 18.68 Hong Kong 622.14 6.72 1,606.45 16.65 977.88 12.04 53Particulars* Financial Year 2025 Financial Year 2024 Financial Year 2023 Amount % of Amount % of Amount % of (in ₹ million) revenue (in ₹ million) revenue (in ₹ revenue from from million) from operations operations operations Sweden 904.57 9.77 1,044.50 10.82 648.76 7.99 United Kingdom 817.64 8.83 679.44 7.04 812.52 10.00 Germany 1,135.12 12.28 993.99 10.30 797.82 9.82 Others 604.89 6.53 531.01 5.50 774.90 9.55 Total revenue from operations 9,246.05 100.00 9,650.74 100.00 8,121.32 100.00 *Note: Includes direct sales to customers and indirect sales through vendors to end customers.

We are subject to risks in connection with compliance with the laws of countries where we operate or export our products to, including export tariffs, multiple tax and cost structures, cultural and language factors, among others.

In particular, recent developments in U.S. tariff policies, including the imposition of tariffs on a variety of exports from India into the U.S., have created significant uncertainty for Indian exporters, including us. Such tariffs may lead to higher costs of compliance and price of our products, reduced competitiveness and lower demand for our products, and downward pressure on our profit margins, particularly as the U.S. is our largest export market.

During the six months period ended September 30, 2025 and the Financial Years 2025, 2024 and 2023, we did not incur any costs due to export tariffs imposed by foreign governments.

Further, the accounting standards, tax laws and other regulations in the jurisdictions we operate in are subject to differing interpretations. For example, certain agreements entered into between Aequs Aerospace France SAS, our Subsidiary, and its customers contain, among others, competing offer clauses and exclusivity of purchase commitment clauses, which may be interpreted or construed as anti-competitive practices under foreign laws, which may in turn lead to the invalidity of such agreements. In addition, regulatory requirements are still evolving in many markets and are subject to change and as a result may, at times, be unclear or inconsistent. Consequently, we may inadvertently fail to comply with such regulations, which could lead to enforced shutdowns and other sanctions imposed by the relevant authorities, as well as the withholding or delay in receipt of regulatory approvals, which may increase our costs for complying with applicable laws, rules and other requirements. Further, we may also be required to intimate or obtain prior authorization from foreign authorities in their respective jurisdictions for change in control of certain of our Subsidiaries beyond a certain threshold. For instance, while we have not seen any instance in the past nor do we foresee in the future, any change in shareholding of our Company which would result in direct or indirect crossing, alone or in concert, of the threshold of 25% or more shareholding or voting rights in AAF, by an investor, as per the French Monetary and Financial Code, in case of a change in the shareholding of our Company which results in a foreign company or a French company controlled by a foreign company or a natural person of foreign nationality acquiring indirect shareholding of AAF (beyond 25% or more) and voting rights in AAF, a prior authorization is required to be obtained from the Minister of the Economy, France. There is no assurance that such prior approval will be granted, and if granted, such approval may be accompanied with specific conditions or acts. While we have not faced any such instances that have materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the past three Financial Years, we cannot assure you that we will not be subject to regulatory actions due to our inability to comply with the applicable regulatory requirements in jurisdictions outside India in the future. Any such instance could adversely affect our business, results of operations, financial condition and cash flows. For details, see “- Non-compliance with and changes in, corporate affairs, safety, environmental and labour laws and other applicable regulations, may adversely affect our business, results of operations, financial condition and cash flows” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Quantitative and Qualitative Disclosures Regarding Market and Other Risks – Foreign Currency Risk” on pages 57 and 573, respectively.

18. Certain of the units in the manufacturing clusters in which we operate, in Belagavi, Karnataka and Koppal, Karnataka are located in SEZs, and the manufacturing cluster, we operate in, located in Hubballi, Karnataka is operating under Export Oriented Unit (EOU) Scheme. We are subject to certain regulations and receive certain tax benefits as a result of such operations, and we cannot assure you that we will be able to comply with such regulations or that we will continue to receive such tax benefits in the future.

Certain of the units in the manufacturing clusters, in which we operate, located in Belagavi, Karnataka and Koppal, Karnataka, are located in special economic zones (“SEZ”), which are governed under the provisions of Special Economic Zones Act, 2005 (“SEZ Act”). As per the SEZ Act, we are required to apply and obtain valid letter of approval from the SEZ authorities to establish a unit in the SEZ. Further, such letters of approvals expire in the ordinary course of business and are subject to periodic renewals. While such approvals are valid as of the date of 54this Prospectus and we may have either made or are in process of making an application for renewal wherever applicable, we may not receive such approvals or renewals in the timeframe anticipated by us or at all, which could adversely affect our business operations. For further information, see “Government and Other Approvals” on page 586.

SEZs are also subject to various conditions including approved business operations in compliance with their respective letters of approval and other regulatory compliances such as achieving positive net foreign exchange earnings in compliance with the SEZ Act. Failure to comply with the relevant restrictions and conditions could result in withdrawal of letter of approval of the SEZ status of the underlying land or imposition of penalties, which could adversely affect our business, results of operations, financial condition and cash flows.

Our units in the Hubballi Manufacturing Cluster are operating under the export oriented units scheme (“EOU Scheme”) which is governed under the provisions of Foreign Trade Policy. As per the EOU Scheme, we are required to apply and obtain letters of approval from the relevant authorities to establish a unit as EOU. Further, such letters of approval may expire in the ordinary course of business and are subject to periodic renewals. While such approvals are valid as of the date of this Prospectus and we may have either made or are in process of making an application for renewal wherever applicable, we may not receive such approvals or renewals in the timeframe anticipated by us or at all, which could adversely affect our business operations. Under the EOU Scheme, we have to comply with various conditions such as achieving positive net foreign exchange earnings. Failure to comply with the relevant restrictions and conditions could result in withdrawal of letter of approval or imposition of penalties, which could adversely affect our business, results of operations, financial condition and cash flows.

We avail duty exemptions and income tax deductions arising from our operations in the SEZ in Belagavi, Karnataka and Koppal, Karnataka and export oriented unit (“EOU”) at Hubballi, Karnataka, such as those available to us under Income Tax Act, GST Act, Customs Act as detailed in the table below for the periods/years

indicated:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Duty exemptions and income tax deductions arising 1,467.50 1,009.51 2,135.32 2,059.67 1,807.00 from operations in SEZ and EOU (₹ in million) Duty exemptions and income tax deductions arising 27.32 21.99 23.09 21.34 22.25 from operations in SEZ and EOU, as a percentage of revenue from operations (%) In case the indirect tax duty exemptions (customs duty and GST) currently available to the units in the manufacturing clusters operating in the SEZ are discontinued in the future, we may be required to pay duties/ taxes on import/ procurements, a portion of which may be claimed later by way of refund. For instance, the tax exemption under Section 10AA of the Income Tax Act has been discontinued for new SEZ units which commenced commercial production from April 1, 2021. While there has not been any impact for the six months period ended September 30, 2025 and the past three Financial Years, pursuant to this discontinuation, on our business and operations, if such duty exemptions or income tax deductions which are currently availed by us are discontinued or become unavailable to us in the future for any reason, including due to a change in government regulation, our business, results of operations, financial condition, working capital and cash flows may be adversely affected.

Further, we may also be subject to custom duties under the Customs Tariff Act, 1975 (“CTA”) in case the concessions we enjoy under the CTA are in relation to our offices in SEZ locations are removed and replaced with any domestic tariff areas. While we have not faced any instances of regulatory non-compliance for the six months period ended September 30, 2025 and the past three Financial Years, there is no assurance that such events will not occur in the future.The Government of India has, in 2022, announced that the SEZ Act may be replaced with a new legislation, namely the Development of Enterprises and Services Hub Bill, 2022. While a draft of the legislation is yet to be introduced, we cannot assure you that we will continue to be eligible to avail similar benefits under the proposed legislation or comply with the provisions under the new legislation once enforced. For details, see “– Changing laws, rules and regulations and legal uncertainties, including adverse application of corporate and tax laws, may adversely affect our business, results of operations, financial condition, cash flows and prospects.” on page 90.

5519. We have entered into, and may continue to enter into related party transactions. We cannot assure you that such transactions, individually or in the aggregate, will not have an adverse effect on our business, results of operations, financial condition and cash flows.

We have entered into certain transactions with related parties of our Company and may continue to do so in the future. For example, we entered into related party transactions with entities for, among other things, lease of land required for our business activities, and our electricity requirements at the units in the manufacturing clusters we operate in and facilities, wherein our Promoters and/or Directors have certain interests. These related party transactions disclosed in the section titled “Financial Information – Restated Consolidated Financial Information” on page 383 have been carried out in the ordinary course of business and on an arm’s length basis, in compliance with the relevant provisions of the Companies Act 2013, relevant accounting standards and other statutory compliances. For details on our related-party transactions, see “Financial Information – Restated Consolidated Financial Information – Note 35 - Related Party Transactions” on page 471.

The following table sets forth the breakdown of our related party transactions for the periods/years indicated:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Related party transactions in relation to issue of 0.00 41.50 64.60 154.88 910.98 shares for cash and for consideration other than cash, Equity Shares transferred during the year and investment in equity shares by related parties during the year. (₹ in million) Related party transactions in relation to issue of 0.00% 0.90% 0.70% 1.60% 11.22% shares for cash and for consideration other than cash, Equity Shares transferred during the year and investment in equity shares by related parties during the year as a percentage of revenue from operations (%) Other related party transactions (₹ in million) 1,109.82 872.02 2,540.41 2,164.76 1,848.61 Other related party transactions, as a percentage 20.66% 19.00% 27.48% 22.43% 22.76% of revenue from operations (%) Although all related-party transactions that we may enter into post-listing of our Equity Shares will be subject to approval by our Audit Committee, Board or Shareholders, as required under the Companies Act 2013 and the SEBI Listing Regulations, we cannot assure you that such transactions, individually or in aggregate, will not be detrimental to the interest of our Company, have an adverse effect on our financial condition and results of operations or that we could not have achieved more favorable terms if such transactions had not been entered into with related parties. We cannot assure you that such transactions, individually or in the aggregate, will perform as expected or result in the benefit envisaged therein, or that we could not have undertaken such transactions on more favourable terms with any unrelated parties. Such related-party transactions and any future related-party transactions may also not always be in the best interests of our minority shareholders. Any existing or future transactions with our related parties could potentially involve conflicts of interest which may be detrimental to our Company, and we cannot assure you that we will be able to address such conflicts of interests in our favor in the future, and such conflicts may have an adverse effect on our business, results of operations, financial condition and cash flows.

20. Non-compliance with and changes in, corporate affairs, safety, environmental and labour laws and other applicable regulations, may adversely affect our business, results of operations, financial condition and cash flows.

We are subject to laws and government regulations, including in relation to corporate affairs, safety, environmental protection and labour. These laws and regulations impose controls on air and water discharge, noise levels, storage handling, employee exposure to hazardous substances and other aspects of our manufacturing operations. For details on regulations and policies applicable to our business, see “Key Regulations and Policies” on page 327.

We handle and use hazardous materials in our manufacturing activities and the improper handling or storage of these materials could result in accidents, injure our personnel, property and damage the environment. For details, see “- We regularly work with hazardous materials and activities in our operations can be dangerous, which may cause injuries to people or property” on page 75.

56Laws and regulations may limit the amount of hazardous and pollutant discharge that the units in the manufacturing clusters we operate in and facilities may release into the air and water. The discharge of materials that are chemical in nature or of other hazardous substances into the air, soil or water beyond these limits may cause us to be liable to regulatory bodies or third parties. While we have not been liable for such discharge of materials beyond prescribed limits for the six months period ended September 30, 2025 and the past three Financial Years, we cannot assure you that we will not breach such limits in the future, which may require us to shut down our operations in the units in the manufacturing clusters and/or facilities, which in turn could lead to product shortages that delay or prevent us from fulfilling our obligations to customers.

We are also subject to the laws and regulations governing employees and labour, including in relation to minimum wage and maximum working hours, overtime, working conditions, hiring and termination of employees, contract labour and work permits. We have incurred and expect to continue incurring costs for compliance with such laws and regulations. We have also made and expect to continue making expenditures on an on-going basis to comply with all applicable environmental, health and safety and labour laws and regulations. We have not been found to be materially non-compliant with any such environmental, health and safety and labour law and regulations for the six months period ended September 30, 2025 and the past three Financial Years in India. Under applicable labour laws in France, applicable to our Material Subsidiary, AAF, some of the employees of AAF may be entitled to file claims with respect to payment of remuneration based on certain factors, including delegation of authority, determination of variable remuneration and working hours, which may result in imposition of penalties on AAF and imprisonment of AAF’s legal representative. Further, with respect to compliance with environmental laws by AAF, AAF was required to submit a declaration to the French authorities under the Environmental Code on account of change in operator pursuant to corporate restructuring in 2021, and any such non-compliance with respect to submission of such declarations may lead to imposition of additional penalties on AAF. In addition to the above, AAF is also required to comply with applicable taxation laws in France, and may be subject to imposition of penalties, on account of non-filing of certain declarations in connection with the corporate restructuring in 2021 in line with the prescribed timelines under applicable French law. However, we cannot assure you that we will not be found to be in non-compliance with, or remain in compliance with all applicable environmental, health and safety and labour laws and regulations or the terms and conditions of any consents or permits in the future or that such compliance will not result in a curtailment of production or a significant increase in the costs of production, which may adversely affect our business, results of operations, financial condition and cash flows.

Further, we are also subject to compliance with various corporate laws and regulations, including the Companies Act 2013. In addition, contraventions of such corporate laws, if any, may require us to pay penalties. For instance, one of our Joint Ventures, API is in the process of filing an application for adjudication of contravention of Section 203 of the Companies Act 2013 in relation to delay in appointment of company secretary. Except as stated below, there have been no non-compliances by and penalty levied, if any, on our Company and Subsidiaries in the six months period ended September 30, 2025 and the past three Financial Years:

1. Aequs Limited:

Sr. Nature of non- Authority Date of notice/ Response Penalty or Status No compliance order fine levied/ paid For the six months period ended September 30, 2025

1. Notice regarding Assistant July 25, 2025 Clearance order Interest Closed proceedings under Provident Fund letter from EPF ₹2,05,148 sections 14B and Commissioner, Department and 7Q of the Bangalore Damages Employee ₹3,83,048 Provident Fund and Miscellaneous Provision Act, 1952

2. Payment of Late Overseas August 6, 2025 Response ₹15,000 Closed Submission Fee Investment submitted by

(LSF) for delay in Division, Foreign Company on submission filed Exchange August 8, 2025 with AD Department, RBI

(Bengaluru)

3. Payment of Late Overseas August 6, 2025 Response ₹15,000 Closed Submission Fee Investment submitted by

(LSF) for delay in Division, Foreign Company on Exchange August 8, 2025 57Sr. Nature of non- Authority Date of notice/ Response Penalty or Status No compliance order fine levied/ paid submission filed Department, RBI with AD (Bengaluru) Financial Year ended March 31, 2025

1. Interest paid for Commercial Tax July 2, 2024 Interest paid ₹376,387 Closed delay in GST Office, Payment Enforcement, Bangalore Financial Year ended March 31, 2024

1. Notice regarding Regional January 18, Confirmation on Damages – Closed proceedings under Provident Fund 2024 payment of ₹3,297 sections 14B and Commissioner, damages and Interest – 7Q of the Office of the interest submitted ₹3,916 Employee Provident Fund, on March 1, 2024 Provident Fund Bangalore and Miscellaneous Provision Act, 1952

2. Request for Assistant Director, October 26, Confirmation on Nil Closed registration of Employee State 2023 registration establishment of Insurance submitted on factory/ Corporation, February 2, 2024 establishment Bangalore under the Employees’ State Insurance Corporation Act, 1948

3. Request for Enforcement April 13, 2023 Reply to the notice Nil Closed submission of Officer, Employee along with the comprehensive Provident Fund required reports Organisation, documents Bengaluru submitted on April 20, 2023

4. Receipt of short Senior Labour April 11, 2023 Reply to the notice Nil Closed notice of Inspector, along with the inspection in Bangalore required relation to confirmations compliance with submitted on May various labour 17, 2023 laws Financial Year ended March 31, 2023

1. Request for Office of the Joint January 7, Response along Nil Closed categorisation of Director, District 2023 with the requisite employees under Industries Center, information group A, B, C & D Udyambag, submitted on with 100% Belagavi January 16, 2023 employment to Kannadigas under group C & D in accordance with Dr. Sarojini Mahishi Report, for quarter ended December 2022

2. Request for Regional PF November 21, Response along Nil Closed verification of Commissioner II, 2022 with the required details of members Bangalore documents availing benefits submitted on pursuant to the December 20, Aatmanirbhar 2022 Bharat Rojgar Yojana scheme 58Sr. Nature of non- Authority Date of notice/ Response Penalty or Status No compliance order fine levied/ paid

3. Receipt of Deputy Director of November 19, Responses to Nil Closed suggestions in Factories, 2022 suggestions relation to Division-1, submitted on operation of Belagavi November 29, manufacturing 2022 processes

4. Direction for Senior Labour October 27, Response stating Nil Closed submission of Inspector, 2022 that the relevant certain registers Belagavi records pertaining and records to Aequs SEZ required to be shall be intimated maintained under to the SEZ the Minimum Commissioner and Wages Act, 1948 Deputy Labour and Karnataka Commissioner, Minimum Wages Belgaum region on Act, 1958 November 9, 2022

5. Notice regarding Assistant October 8, Differential ₹4,293 Closed proceedings under Provident Fund 2022 amount paid and sections14B and Commissioner, responses 7Q of the Bangalore submitted on Employee November 9, 2022 Provident Fund and Miscellaneous Provision Act, 1952

2. AeroStructures Manufacturing India Private Limited:

Sr. Nature of non- Authority Date of notice/ Response Penalty or Status No. compliance order fine levied/ paid For the six months period ended September 30, 2025

1. Payment of Late Overseas August 6, 2025 Response ₹30,000 Closed Submission Fee Investment submitted by

(LSF) for delay in Division, Company on submission filed Foreign August 8, 2025 with AD Exchange Department, RBI

(Bengaluru)

2. Payment of Late Overseas August 6, 2025 Response ₹1,085,400 Closed Submission Fee Investment submitted by

(LSF) for delay in Division, Company on submission filed Foreign August 8, 2025 with AD Exchange Department, RBI

(Bengaluru) Financial Year ended March 31, 2025 Nil Financial Year ended March 31, 2024 Nil Financial Year ended March 31, 2023

1. Request for Office of the January 7, 2023 Response along No Closed categorisation of Joint Director, with the requisite employees under District information group A, B, C & D Industries submitted on with 100% Center, January 16, 2023 employment to Udyambag, Kannadigas under Belagavi group C & D in accordance with Dr. Sarojini 59Sr. Nature of non- Authority Date of notice/ Response Penalty or Status No. compliance order fine levied/ paid Mahishi Report, for quarter ended December 2022

2. Receipt of Deputy Director November 19, Responses to Nil Closed suggestions in of Factories, 2022 suggestions relation to Division-1, submitted on operation of Belagavi April 27, 2022 manufacturing processes

3. Aerostructures Assemblies India Private Limited:

Sr. Nature of non- Authority Date of notice/ Response Penalty or fine Status No. compliance order levied/ paid For the six months period ended September 30, 2025

1. Query raised for GST Department July 11, 2025 Reply has been ₹37,08,508 In Process difference - Commercial and DRC-01 submitted along between amount Tax Office, dated with all claimed in GST Belagavi September 24, supporting return and amount 2025 documents.

reflected in GSTR Reply to DRC- 2B) 01 was submitted on October 23, 2025 Financial Year ended March 31, 2025 Nil Financial Year ended March 31, 2024

1. Default in Regional February 19, Penalty paid on ₹75,000 Closed compliance with Director, South 2024 February 7, 2024 the requirements East Region, of Section 203 Ministry of read with Rule 8A Corporate of the Companies Affairs, (Appointment and Hyderabad Remuneration of Managerial Personnel) Rules, 2014

2. Default in Registrar of November 30, January 23, 2024 Not Applicable Closed compliance with Companies, 2023 (date of appeal) the requirements Bengaluru, of Section 203 Ministry of read with Rule 8A Corporate of the Companies Affairs (Appointment and Remuneration of Managerial Personnel) Rules, 2014

3. Voluntary Goods and June 16, 2023 Form GST DRC- ₹1,042 Closed payment towards Services Tax, 03 filed on tax liabilities for Government of August 16, 2023 the financial year India, States and 2019-20 Union Territories

4. Contravention of Regional November 30, January 22, 2024 ₹75,000 Closed

Section 203 of the Director, South 2023 (date of appeal) Companies Act East Region, 2013 in relation to Ministry of delay in Corporate appointment of Affairs, company secretary Hyderabad Financial Year ended March 31, 2023 60Sr. Nature of non- Authority Date of notice/ Response Penalty or fine Status No. compliance order levied/ paid

1. Request for Office of the January 7, 2023 Response along Nil Closed categorisation of Joint Director, with the requisite employees under District information group A, B, C & D Industries submitted on with 100% Center, January 16, 2023 employment to Udyambag, Kannadigas under Belagavi group C & D in accordance with Dr. Sarojini Mahishi Report, for quarter ended December 2022

4. Aequs Force Consumer Products Private Limited:

Sr. Nature of non- Authority Date of notice/ Response Penalty or fine Status No. compliance order levied/ paid For the six months period ended September 30, 2025 Nil Financial Year ended March 31, 2025

1. Tax payable on GST Department February 25, Reply given, all ₹50,000 Closed Zero rated - Commercial 2025 documents submitted. turnover in the Tax Office, We have submitted absence of EGM Belagavi the additional details on documents for giving ICEGATE portal clarifications for and Tax payable proposed demand on Non-payment of GST on Sub- Lease Income Non availment and non reversal of ITC available in GSTR 2B by SEZ Unit Financial Year ended March 31, 2024

1. Non-compliance - - For payables - Closed under the which are due Reserve Bank of for more than India Master three years as at Direction on March 31, 2023 Import of Goods – ₹2 million and Services For payables vide FED which are Master Direction outstanding for No. 17/2016-17 more than six dated January 1, months but less 2016 (as than three years amended), in from the date of relation to non- imports as at settlement of March 31, 2023 foreign currency – ₹41 million payables Financial Year ended March 31, 2023

1. Receipt of Deputy Director November 19, Responses to Nil Closed suggestions in of Factories, 2022 suggestions relation to Division-1, submitted on operation of Belagavi November 29, manufacturing 2022 processes

615. Aequs Toys Private Limited:

Sr. Nature of non- Authority Date of notice/ Response Penalty or Status No. compliance order fine levied/ paid For the six months period ended September 30, 2025 Nil Financial Year ended March 31, 2025

1. Receipt of Employees June 6, 2024 Response along Nil Closed submission of Provident Fund with the required records for Organisation, documents on ascertaining Ballari June 17, 2024 applicability of the Employees’ Provident Funds and Miscellaneous Provisions Act, 1952

2. Request for Employees October 10, Response along Nil Closed submission of Provident Fund 2024 with the required documents/ Organisation, documents on records Bengaluru October 24, 2024 Financial year ended March 31, 2024 Nil Financial year ended March 31, 2023

1. Receipt of detailed Assistant Director July 4, 2022 Response along Nil Closed inspection report of Factories, with details on with observations Koppal Division, compliance with Koppal observations received submitted on July 25, 2022

6. Aequs Engineered Plastics Private Limited:

Sr. Nature of non- Date of notice/ Penalty or fine Authority Response Status No. compliance order levied/ paid For the six months period ended September 30, 2025 Nil Financial Year ended March 31, 2025

1. Non-payment of Professional Tax July 29, 2024 Response along Nil Closed enrolment fees Office, with Form 4A Sankeshwar and other required documents was submitted on August 23, 2024

2. Registration of Assistant/Deputy March 4, 2025 Delay in Nil Closed employee under Director ESIC, providing ESIC after 10 days Hubli response by of joining employee Financial year ended March 31, 2024

1. Non-remittance/ Regional PF February 28, Response along Nil Closed partial remittance Commissioner – 2024 with of provident fund II, Hubli confirmation on contributions and compliance with non-submission of relevant payments was 62Sr. Nature of non- Date of notice/ Penalty or fine Authority Response Status No. compliance order levied/ paid provident fund submitted on contributions March 01, 2024

2. Receipt of Department of May 25, 2023 Responses to Nil Closed suggestions in Factories Boilers suggestions relation to Industrial Safety submitted on operation of and Health, May 26, 2023 manufacturing Bangalore processes

3. Non-compliance - - For payables - Closed under the Reserve which are due for Bank of India more than three Master Direction years as at March on Import of 31, 2023 – ₹1 Goods and million Services vide FED Master Direction For payables No. 17/2016-17 which are dated January 1, outstanding for 2016 (as more than six amended), in months but less relation to non- than three years settlement of from the date of foreign currency imports as at payables March 31, 2023 – ₹7 million Financial year ended March 31, 2023

1. Receipt of Deputy Director November 19, Responses to Nil Closed suggestions in of Factories, 2022 suggestions relation to Division-1, submitted on operation of Belagavi November 29, manufacturing 2022 processes

2. Request for Regional PF May 24, 2022 Response along Nil Closed verification of Commissioner II, with the required details of Bangalore documents members availing submitted on benefits pursuant June 7, 2022 to the Aatmanirbhar Bharat Rojgar Yojana scheme

7. Aequs Home Appliances Private Limited:

Sr. Nature of non- Authority Date of notice/ Response Penalty or Status No. compliance order fine levied/ paid For the six months period ended September 30, 2025 Nil Financial Year ended March 31, 2025 Nil Financial year ended March 31, 2024 Nil Financial year ended March 31, 2023

1. Notice in relation Employee State January 9, 2023 Response along Nil Closed to failure of Insurance with confirmation payment of that no employees 63Sr. Nature of non- Authority Date of notice/ Response Penalty or Status No. compliance order fine levied/ paid monthly Corporation, were engaged contribution in Bangalore during the compliance with relevant period the Employee was submitted on State Insurance March 6, 2023 Corporation, 1948

8. Aequs Rajas Extrusion Private Limited:

Sr. Nature of non- Authority Date of Response Penalty or fine Status No. compliance notice/ order levied/ paid For the six months period ended September 30, 2025 Nil Financial Year ended March 31, 2025 Nil Financial year ended March 31, 2024 Nil Financial year ended March 31, 2023 Nil

9. Aequs Aerospace France SAS Sr. Nature of non- Authority Date of Response Penalty or fine Status No. compliance notice/ order levied/ paid For the six months period ended September 30, 2025 Nil Financial Year ended March 31, 2025 Nil Financial year ended March 31, 2024

1. Social taxes URSSAF Des - Taxes paid Euro 5,898.20 Closed Pays De Loire Financial year ended March 31, 2023 Nil

10. Aequs Consumer Products Private Limited:

Sr. Nature of non- Authority Date of notice/ Response Penalty or Status No. compliance order fine levied/ paid For the six months period ended September 30, 2025

1. Observation of GST July 2, 2025 Reply has ₹246,390 In Process difference in Department – and DRC-01 been Turnover, Commercial dated submitted Excess ITC Tax Office, September 26, along with amount Bangalore 2025 supporting claimed as per documents on GSTR 2A and October 27, 3B 2025 Financial Year ended March 31, 2025 Nil Financial year ended March 31, 2024 Nil Financial year ended March 31, 2023 Nil We cannot assure you that any such contraventions will not occur in future or that any penalty will not be levied by the authorities or any proceeding or action which may be initiated in the future will not divert management attention and subject us to further regulatory consequences, including adjudicatory penalties, which could have an adverse effect on our business, finances, results of operations and cash flows, as well as on our reputation. For further details in relation to the statutory dues paid by our Company in the six months period ended September 30, 642025 and 2024, and the Financial Years 2025, 2024 and 2023, please see “– Any delay in payment of statutory dues by our Company in the future, may result in the imposition of penalties and in turn may have an adverse effect on our Company’s business, financial condition, results of operation and cash flows.” on page 81.

21. We are subject to a variety of threats and challenges affecting the manufacturing sector in India, which may adversely affect our business, results of operations, financial condition and cash flows.

Our business is subject to a wide range of sector-specific threats and challenges, including those relating to high capital investment, operational complexity, smaller batch sizes, higher precision requirements, technological obsolescence, cybersecurity, policy and infrastructure constraints, fluctuating global demand and competition, raw material price volatility, skill shortages, cost of compliance, technological upgradation, and supply chain and distribution. For details, see “Industry Overview – PEC Sector Threats and Challenges” on page 285.

The adoption of automation and precision manufacturing systems involve substantial upfront investment, and managing and maintaining sophisticated equipment also requires specialized knowledge and working capital, particularly as breakdowns of machinery and equipment can result in costly downtime. Further, the trend towards customized and energy-efficient products has resulted in increased demand for smaller batch sizes, which is time- consuming and expensive to manufacture, particularly as manufacturers find it increasingly difficult to recover their capital investments quickly, potentially leading to cash flow issues. In addition, technological obsolescence may render older technologies inefficient, unsafe or unable to comply with modern environmental standards, leading to increased operational costs and regulatory non-compliance. Staying updated with technological trends is crucial for manufacturers like our Company to remain competitive. Moreover, increased reliance on automation and digital systems exposes manufacturers to cyberattacks, which can disrupt operations and comprise sensitive date; and lack of comprehensive policy support for automation adoption may pose challenges for manufacturers in accessing markets, reliable distribution and efficient local resources. Further, precision engineered components manufacturers in India face stiff competition from global players, particularly those with advanced technology and established market presence. Fluctuations in global demand, trade policies (including tariffs imposed from foreign countries, such as the U.S.) and foreign exchange rates can further affect export-orientated businesses like us. The occurrence of any or all of the above factors may adversely affect our business, results of operations, financial condition and cash flows.

Raw materials for precision components, especially steel, titanium, alloys and composites, have been subject to significant price fluctuations in the past, leading to increased production costs and decreasing demand of related products. Further, a shortage of skilled labour in India, particularly in areas such as robotics, automation and advanced machining, may lead to increased employee costs. In addition, as clients, particularly those in the aerospace and defense sectors, demand tight tolerances and stringent quality standards, manufacturers are required to continuously invest in processes, documentation, and testing, alongside investments in advanced equipment, skilled manpower and robust quality control systems, leading to higher compliance costs. Moreover, manufacturers are required to continuously upgrade technological capabilities to maintain facilities with advanced automation, robotics and machinery, thereby requiring significant investments. Lastly, delays or disruptions in the supply chain may adversely affect the ability of manufacturers to meet contractual deadlines and quality requirements of clients. The occurrence of any or all of the above factors may adversely affect our business, results of operations, financial condition and cash flows.

22. Our reliance on third parties for certain aspects of our operations, including on-site job work, transport and logistics may affect the quality of our products and our ability to meet delivery timelines to our customers, which may adversely affect our business, results of operations, financial condition and cash flows.

We rely on third parties for certain aspects of our business operations, including contract labourers, transport and logistics providers. As of September 30, 2025, we have appointed 38 third party transport/courier service providers for providing transport and logistics services for our products. We rely on independent contractors who engage contract labour to perform a variety of on-site job work related to the manufacturing of our products, including assembly, manufacturing support, inspection, constructions for increasing manufacturing capabilities, among others. We also rely on transport and logistics providers to arrange transportation of our products to our customers.

The following table sets forth distribution of the third party transport and logistics providers appointed by us for the periods/years indicated below:

65Particulars For the six months As at and for Financial Years ended period ended March 31, September 30, 2025 2024 2025 2024 2023 Number of third party transport and logistic 38 36 41 35 33 providers - Number of domestic transport and logistic 28 26 28 20 19 providers - Number of overseas transport and logistic 10 10 13 15 14 providers Costs paid to transport and logistic providers 65.75 68.97 148.40 114.58 91.49 (Freight & forwarding) (in ₹ million) Costs paid to transport and logistic providers 1.36 1.66 1.75 1.36 1.18 (Freight & forwarding) as a percentage of total expense (%) Number of contract labourers 1,834 1,173 1,330 1,335 1,409 Costs paid to contract labourers (in ₹ million) 211.78 170.83 325.55 384.81 377.57 Costs paid to contract labourers as a percentage of 4.38 4.11 3.82 4.57 4.86 total expense (%) Our reliance on third-party contract labour for outsourced job works and on transport and logistics providers for transportation of our products may affect the quality and workmanship of our products, as well as our ability to meet delivery timelines to our customers. We may be required to incur additional costs to remedy any deficiency in services provided by these third parties. We may also be required to incur additional costs associated to delays in delivery of raw materials by our transport and logistic providers, as such delays in delivery of raw materials are not insured under our transit insurance and may affect our ability to meet delivery timelines to our customers.

Additionally, an increase in the cost of these third-party services may adversely impact our business, results of operations, financial condition and cash flows. Further, while we have not faced any such disruption that have materially and adversely affected our results of operations for six months period ended September 30, 2025 and the past three Financial Years, any future disruption in the availability or quality of services provided by our contract labour or transport and logistics providers may disrupt our operations and adversely affect our business, results of operations, financial condition and cash flows.

23. Fluctuations in the exchange rate between the Indian Rupee and foreign currencies may have an adverse effect on the value of our Equity Shares, independent of our operating results.

We are exposed to foreign exchange risk arising from foreign currency transactions. We frequently engage in transactions which are denominated in foreign currencies, as we sell our products to customers located outside of India, as well as purchase raw materials from suppliers located outside of India, which in turn exposes us to foreign currency risks. Movements in exchange rates between the Indian Rupee and these foreign currencies, in particular the USD and EUR, can therefore create translation gains or losses that do not necessarily reflect our underlying operating performance. A depreciation of the Indian Rupee against these foreign currencies will inflate, and an appreciation will deflate, the Rupee‐denominated value of our foreign currency assets, revenues and earnings, even where the underlying foreign currency amounts remain unchanged, and vice versa with respect to our foreign currency liabilities and expenditures. The table below sets out the details of our foreign currency exposure as at September 30, 2025 and as at March 31, 2025:

As at September 30, 2025: (in ₹ million) CHF JPY GBP USD EUR HKD Financial assets Trade receivable - - - 2,028.32 12.85 - Cash and cash equivalents - - - 0.45 - - Other financial assets - - - - - - Other non current assets - - Net exposure to foreign currency risk - - - 2,028.77 12.85 -

(assets) Financial liability Trade payables 17.33 1.15 17.58 1,470.31 115.41 0.81 Borrowings - - - 2.31 - - Lease liabilities - - - - 692.34 - Other financial liabilities - - - - - - 66CHF JPY GBP USD EUR HKD Net exposure to foreign currency risk 17.33 1.15 17.58 1,472.62 807.75 0.81

(liabilities) As at March 31, 2025: (in ₹ million) CHF JPY GBP USD EUR HKD Financial assets Trade receivable - - - 1,706.74 2.03 - Cash and cash equivalents - - - 57.05 - - Other financial assets - - - - 0.18 - Net exposure to foreign currency risk - - - 1,763.79 2.21 -

(assets) Financial liability Trade payables 7.08 - 20.44 810.97 65.15 0.07 Borrowings - - - 272.71 - - Lease liabilities - - - - 757.24 - Other financial liabilities 0.26 74.39 - 34.17 1.85 - Net exposure to foreign currency risk 7.34 74.39 20.44 1,117.85 824.24 0.07

(liabilities) Further, fluctuations in the Indian Rupee against foreign currencies, particularly the USD, EUR and GBP, have historically affected our revenues and profitability, reflecting the sensitivity of our operations to foreign currency movements, details of which are set forth below as of September 30, 2025 and 2024, and March 31, 2025, 2024 and 2023:

Particulars Impact on profit after tax and equity As at As at As at March As at March As at September September 31, 2025 31, 2024 March 31, 30, 2025 30, 2024 2023 INR/USD - Increase by 5% 23.31 (38.84) 23.31 (19.51) (19.58) INR/USD - decrease by 5% (23.31) 38.84 (23.31) 19.51 19.58 INR/GBP - Increase by 5% (0.74) (0.36) (0.74) (0.20) 0.12 INR/GBP - decrease by 5% 0.74 0.36 0.74 0.20 (0.12) INR/EUR - Increase by 5% (29.67) (34.47) (29.67) (27.64) (18.32) INR/EUR - decrease by 5% 29.67 34.47 29.67 27.64 18.32 INR/JPY - Increase by 5% (2.68) - (2.68) - - INR/JPY - decrease by 5% 2.68 - 2.68 - - INR/CHF - Increase by 5% (0.26) (0.26) (0.26) 0.02 - INR/CHF - decrease by 5% 0.26 0.26 0.26 (0.02) - INR/HKD - Increase by 5% (0.00) (0.06) (0.00) (0.72) (0.71) INR/HKD - decrease by 5% 0.00 0.06 0.00 0.72 0.71 Particulars Impact on revenue from operations As at As at As at March 31, As at March As at September September 2025 31, 2024 March 31, 30, 2025 30, 2024 2023 INR/USD - Increase by 5% 229.42 191.46 380.53 410.18 345.08 INR/USD - decrease by 5% (229.42) (191.46) (380.53) (410.18) (345.08) INR/EUR - Increase by 5% 29.67 23.03 53.58 47.61 33.74 INR/EUR - decrease by 5% (29.67) (23.03) (53.58) (47.61) (33.74) For details, see “Restated Consolidated Financial Information – Note 28 – Financial Risk Management” on page 461. Furthermore, fluctuations in exchange rates can influence market perceptions of our financial stability, liquidity and growth prospects, which, in turn, may affect the market price of our Equity Shares. As Indian investors principally assess our performance and dividend‐paying capacity in Indian Rupee terms, periods of Indian Rupee appreciation could lead to the perception that our international revenues and margins are weakening, notwithstanding that they may have remained stable in local currency terms. Conversely, periods of Indian Rupee depreciation could augment our reported Indian Rupee earnings, potentially masking operating challenges within our foreign operations. These translation effects, which are largely beyond our control, may therefore cause 67volatility in our share price that is unrelated to our actual operating results.

Although we have a natural hedge in terms of our receivables and payables primarily being in USD, we do not, and may be unable to, fully hedge our translation exposure or economic exposure. Hedging arrangements are subject to counterparty risk, liquidity constraints, regulatory limitations and mark‐to‐market volatility, and their effectiveness depends on accurate forecasting of our foreign currency cash flows. Any failure to adequately anticipate or hedge exchange rate movements could amplify the adverse impact of currency fluctuations on our financial statements and, consequently, on the market value of our Equity Shares. In addition, changes in exchange control regulations, foreign investment policies, macroeconomic developments, geopolitical events, interest rate differentials and market speculation can all influence exchange rate movements in ways that are unpredictable and rapid. Should the Indian Rupee experience significant appreciation against the currencies in which we earn a substantial portion of our revenue, or should it depreciate against the currencies in which we incur significant costs or hold indebtedness, our reported financial results and, more importantly, investor sentiment towards our Equity Shares could deteriorate irrespective of any underlying improvement in our operational performance.

24. We have a significant amount of foreign exchange borrowings, including foreign exchange borrowings which are unhedged or subject to variable rates, which may expose us to currency and interest rate fluctuations, and in turn adversely affecting our business, results of operations, financial condition and cash flows.

As of September 30, 2025, we had foreign exchange borrowings amounting to ₹2,128.59 million, which constituted 39.90% of our total borrowings. Our foreign exchange borrowings are primarily denominated in USD and EUR. Further, as of September 30, 2025, our unhedged foreign exchange borrowings and variable rate foreign exchange borrowings amounted to ₹2,128.59 million and ₹1,727.40 million, respectively, constituting 39.90% and 32.38% of our total borrowings, respectively. Although we have a natural hedge in terms of our receivables and payables primarily being in USD, we do not, and may be unable to, fully hedge our translation exposure or economic exposure. Thus, we are exposed to foreign exchange currency and interest rate fluctuations, which are subjected to geopolitical events that are beyond our control. Such fluctuations in foreign exchange currency and interest rate may in turn increase our cost of borrowing, and adversely affect our business, results of operations, financial condition and cash flows. For details, see “- Fluctuations in the exchange rate between the Indian Rupee and foreign currencies may have an adverse effect on the value of our Equity Shares, independent of our operating results” on page 66.

25. If we are unable to adequately protect our intellectual property rights, our competitive position and business may be adversely affected.

Pursuant to the Trademark Agreement entered into between MFO IP Holdings Limited (“MFO IP”) and our Company, we use the trade name and trademark “Aequs” and its related trademarks and such other logos. We have been granted the worldwide, exclusive, perpetual and non-transferable license to use the Trademark solely in connection with the conduct of the business activities of our Company and our Subsidiaries, for a license fee, which shall be derived based on the revenue from operations of our Company, as agreed upon in the Trademark Agreement. However, pursuant to a supersession understanding, the consideration payable by our Company to MFO IP for a period of five years with effect from April 1, 2023, is the reimbursement by our Company of the marketing expenses of MFO IP for an amount not exceeding ₹10.00 million per annum. MFO IP is an enterprise in which individuals owning interest in the group (as defined under “Restated Consolidated Financial Information” on page 383 of this Prospectus), or their relatives have control, joint control, or significant influence.

In this regard, it is submitted that Aequs Inc. (promoter of one of our Corporate Promoters, Aequs Manufacturing Investments Private Limited) is the holding company of MFO IP. Accordingly, MFO IP is our Group Company in accordance with Regulation 2(t) of the SEBI ICDR Regulations. For details, see “Our Group Companies” on page 589. Continued usage of the “Aequs” brand by us depends on the ability of MFO IP to develop, maintain and strengthen the “Aequs” brand. While we have not faced any instances of negative publicity or failure to maintain the “Aequs” brand by us or MFO IP for the six months ended September 30, 2025 and in Fiscals 2025, 2024 and 2023 that led to an adverse effect on our business and operations, there can be no assurance that these instances will not occur in the future. There can be no assurance that MFO IP will succeed in continuing to maintain and strengthen the “Aequs” brand which could be harmed by complaints and negative publicity in India and globally, which could have an adverse impact on our reputation, business, financial condition, cash flows, results of operations and prospects.

Any unauthorized or inappropriate use of the “Aequs” brand, trademarks and other related intellectual property rights by third parties could harm our brand image, competitive advantages and business, and dilute or harm our reputation and brand recognition. While we have not faced any material instances of such misappropriation of our 68intellectual property by third parties for the six months period ended September 30, 2025 and the past three Financial Years, there is no assurance that we may not be subject to such instances in the future. For further details on the Trademark Agreement, see “History and Certain Corporate Matters – Summary of key agreements” on page 339.

While we intend to defend against any threats to our intellectual property, we cannot assure you that our trademarks will adequately protect our intellectual property. In addition, the application of laws governing intellectual property rights in India is uncertain and evolving, and could involve substantial risks to us. Notwithstanding the precautions we take to protect our intellectual property rights, it is possible that third parties may copy or otherwise infringe on our rights, which may have an adverse effect on our business, results of operations, financial condition and cash flows. Any inability to obtain new trademarks and protect our proprietary information or other intellectual property, could adversely affect our competitive business and business.

26. Our Company and our Individual Promoter have extended guarantees in respect of borrowings availed by certain of our Subsidiaries and Joint Ventures, and any invocation of such guarantees may adversely affect our financial condition.

Our Company and our Individual Promoter have extended guarantees in favor of banks and financial institutions in respect of borrowings availed by certain of our Subsidiaries and Joint Ventures. These guarantees expose us to potential liabilities in the event that such Subsidiaries and Joint Ventures default in the repayment of their respective borrowings. If such guarantees are invoked, we may be required to honor the obligations of such Subsidiaries and Joint Ventures, which could adversely affect our results of operations, financial condition and cash flows.

Further, the invocation of guarantees could result in restrictions on our ability to raise additional borrowings, affect our credit profile and may also adversely affect the value of our Equity Shares.

The following table provides details of guarantees issued by our Company and Individual Promoter with respect to borrowings availed by certain of our Subsidiaries and Joint Ventures, as of the date of this Prospectus:

Sr. No. Name of Subsidiary/ Joint Guarantee involved (in ₹ million) Venture By Company By Individual Promoter

1. ASMIPL 2,170.00 2,206.00

2. AAI 150.00 -

3. ACPPL 2,983.74 2,983.74

4. API 50.00 -

5. SQuAD 120.00 -

6. AEPPL - 233.00 Total 5,473.74 5,422.74 While these guarantees are provided in the ordinary course of business to support the financing needs of our Subsidiaries and Joint Ventures, there can be no assurance that such Subsidiaries and/ or Joint Ventures will not default in meeting their obligations, requiring us or our Promoters to discharge such guaranteed amounts.

27. Our Company, Subsidiaries, Promoters, Key Managerial Personnel, Senior Management and Directors are involved in certain legal proceedings. Any adverse decision in such proceedings may render our Company, Subsidiaries, Promoters, Key Managerial Personnel, Senior Management and Directors liable to liabilities/penalties and may adversely affect our business, financial condition, results of operations and cash flows.

Our Company, Subsidiaries, Promoters, Key Managerial Personnel, Senior Management and Directors are involved in certain legal proceedings. These legal proceedings are pending at different levels of adjudication before various courts and tribunals or other governmental authorities. The amounts claimed in these proceedings have been disclosed to the extent ascertainable and include amounts claimed jointly and severally from us and other parties. Should any new developments arise, such as any change in applicable Indian law or any rulings against us by appellate courts or tribunals, we may need to make provisions in our financial statements that could increase expenses and current liabilities. Any adverse decision in such legal proceedings may have an adverse effect on our business, financial condition, results of operations and cash flows.

A summary of outstanding litigation proceedings involving our Company, Subsidiaries, Promoters, Key Managerial Personnel, Senior Management and our Directors on the date of this Prospectus and as disclosed in the section titled “Outstanding Litigation and Other Material Developments” beginning on page 581, in terms 69of the requirements under the SEBI ICDR Regulations is provided below:

Category of individuals/ Criminal Tax Actions by Disciplinary Material Aggregate entities proceedings proceedings statutory or actions by SEBI or civil amount regulatory Stock Exchanges litigation# involved* authorities against our (in ₹ Promoters in the million) last five years, including outstanding action Company By the Company Nil N.A. N.A. N.A. Nil Nil Against the Company Nil 3 Nil N.A. Nil 805.34 Directors By the Directors Nil N.A. N.A. N.A. Nil Nil Against the Directors Nil 1 Nil N.A. Nil 3.31 Key Managerial Personnel By the Key Managerial Nil N.A. N.A. N.A. N.A. N.A.

Personnel Against the Key Nil N.A. Nil N.A. N.A. N.A.

Managerial Personnel Senior Management By the Senior Management Nil N.A. N.A. N.A. N.A. N.A.

Against the Senior Nil N.A. Nil N.A. N.A. N.A.

Management Promoters By the Promoters Nil N.A. N.A. Nil Nil Nil Against the Promoters Nil Nil Nil Nil Nil Nil Subsidiaries By the Subsidiaries 1 N.A. N.A. N.A. Nil 0.44 Against the Subsidiaries Nil 7 Nil N.A. Nil 44.12 * To the extent quantifiable.

# Determined in accordance with the Materiality Policy.

Further, as of the date of this Prospectus, there are no pending litigation involving our Group Companies which has a material impact on our Company. Involvement in such proceedings could consume financial resources and divert time and attention from the management of our Company. For further details on the proceedings involving our Company, Subsidiaries, Promoters, Key Managerial Personnel, Senior Management and Directors, see “Outstanding Litigation and Other Material Developments” beginning on page 581. We cannot assure you that any of the outstanding litigation matters will be settled in favor of our Company, Subsidiaries, Promoters, Key Managerial Personnel and Senior Management and Directors, as applicable, or that no additional liability will arise out of these proceedings. An adverse outcome in any of these proceedings may affect our reputation, business, which could have an adverse effect on our financial condition, results of operations and cash flows. Even if we are successful in defending such cases, we may be subject to legal and other costs incurred pursuant to defending such litigation, and such costs may be substantial and not recoverable. In the event of any adverse rulings in these proceedings or consequent levy of penalties, we may need to make payments or make provisions for future payments, and which may increase expenses and current or contingent liabilities. For details of our contingent liabilities, see “Summary of the Offer Document – Summary of contingent liabilities” and “- We have contingent liabilities and commitments, and our financial condition could be adversely affected if these contingent liabilities or commitments materialize” on pages 23 and 79, respectively.

Additionally, there may be proceedings/matters involving our Company before various legal/judicial bodies including those that may be criminal, civil or tax matters in nature in relation to which our Company has not received any notice or summons or any other form of communication, or such proceedings may not have been admitted before the respective courts or adjudicating authority and accordingly such matters have not been disclosed in this Prospectus. Furthermore, there may be certain outstanding matters, in the future, for which the aforementioned parties may not have been served with summons or relevant case documents, which may result in adverse findings against us. An adverse outcome in any of these proceedings, either individually or in aggregate, may affect our reputation, business operations, cash flows, financial condition, results of operations and prospects.

7028. We are subject to risks associated with product liability and recall if our products are found to be defective, which may arise from our products failing to perform as expected or meet the stringent quality or qualification standards, which may adversely affect our reputation, business, results of operations, financial condition and cash flows.

We are subject to risks associated with product liability and recall if our products are found to be defective, which may arise from our products failing to perform as expected or failing to meet the stringent quality or qualification standards set out in our contractual arrangements or as prescribed under the applicable regulatory framework. For details, see “Our Business – Description of Our Business – Quality Standards and Assurance” on page 318. Our manufacturing operations are subject to government policies and controls, both domestic and overseas, for uncertainties associated with international standards and prescribed customer quality standards, and any manufacturing or quality control concerns may give rise to defective products, which may lead to product liability, warranty and recall claims.

Our Company did not have product recalls, or product liability claims for the six months period ended September 30, 2025 and the past three Financial Years. Further, we cannot assure you that any product defects will not arise in the future, whether on our account or on account of defective components provided by a supplier. If such cases arise, our customers may cancel orders, refuse to renew contracts, make adverse claims against us which, if litigated, may be decided against us. Any future product defects or defaults may have an adverse impact on our business, results of operations, financial condition and cash flows.

Our defective products may result in bodily injury, property damage or work accidents, any of which may expose us to claims relating to product liability, warranty and recall. Further, instances of product recall may have an adverse effect on our reputation, resulting in a decrease in future orders or contracts from our existing and potential customers, which in turn may adversely affect our business, results of operations, financial condition and cash flows. We maintain insurance coverage for product liability, warranty and recall. For details, see “– We may not be sufficiently protected or insured for certain losses that we may incur or claims that we may face against us, which may adversely affect our business, results of operations, financial condition and cash flows” on page 82.

While past instances of product liability and recall claims did not materially and adversely affect our results of operations for the six months period ended September 30, 2025 and the past three Financial Years, we cannot assure you that we will not experience losses relating to product liability and recall claims or that we will not incur costs to defend any such claims in the future, which may adversely affect our business, results of operations, financial condition and cash flows.

29. We have not yet placed orders for purchasing additional machinery and equipment required in the units in the manufacturing clusters we operate in. If there is any delay in placing such orders or if the vendors are not able to supply the additional machinery and equipment in a timely manner, or at all, this may result in time and cost overruns, which may adversely affect our business, results of operations, financial condition and cash flows.

We propose to utilize approximately 10.28% of the Net Proceeds aggregating to ₹ 640.02 million towards purchase of machinery and equipment which will be used in the units in the manufacturing clusters we operate in to meet with the required demand and product quality. Since our additional machinery and equipment are made-to-order and customized as per our business requirements, which shall be decided at the time of actual utilization of the Net Proceeds, we have not entered into any definitive arrangements or placed any orders for purchase of certain customized additional machinery and equipment. For details, see “Objects of the Offer – Details of the Objects” on page 150. We have relied on the quotations received from third parties for estimation of the cost. While we have obtained the quotations from vendors in relation to such capital expenditure, most of these quotations are valid for a certain period of time and may be subject to revisions, and other commercial and technical factors. For orders which are yet to be placed, there can be no assurance that the same contractor/ vendor would be engaged eventually at the same costs and that such costs will not adversely affect our business, cash flows, financial condition and results of operations in this regard. While we have not faced any instances of delays in placing orders for purchasing such additional machinery and equipment, or if the vendors are not able to supply the additional machinery and equipment in a timely manner, or at all, which materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the past three Financial Years, if there is any such delay in the future, this may result in time and cost overruns, which may adversely affect our business, results of operations, financial condition and cash flows.

7130. If our Net Proceeds to be utilised towards inorganic growth through unidentified acquisitions and strategic initiatives are insufficient for the cost of our inorganic acquisitions and strategic initiatives, we may have to seek alternative forms of funding.

We propose to utilize certain portion of our Net Proceeds towards funding inorganic growth through unidentified acquisitions and strategic initiatives. For details, see “Objects of the Offer – Funding inorganic growth through unidentified acquisitions, other strategic initiatives and general corporate purposes” on page 160.

The actual deployment of funds will depend on various factors, including: (i) expertise and experience in markets that we operate in or wish to expand into; (ii) strategic compatibility or synergy with our existing businesses; (iii) additional or enhanced products and services in order to expand, diversify and/or improve our offerings; (iv) strengthening our market share in existing markets or establishing presence in new markets (including additional geographical regions); and (v) access to infrastructure and capabilities, including ones which supplement or complement our existing infrastructure. These factors will also determine the form of investment for these potential unidentified acquisitions or strategic initiatives, i.e., whether they will involve equity, debt or any other instrument or combination thereof. At this stage, we cannot determine whether the form of investment will be equity, debt or any other instrument or combination thereof. We will from time to time continue to seek attractive inorganic opportunities, which may be in the nature of, inter alia, acquisition of a minority interest in any entity, entering into a joint venture arrangement or acquisition of a majority stake in an entity, that may be within India, outside India or both, that we believe will fit well with our strategic business objectives and growth strategies, and the amount of Net Proceeds to be used for acquisitions will be based on decisions of our management and our Board.

The cumulative amount to be utilized towards inorganic growth through acquisition and other strategic initiatives and general corporate purposes shall not exceed 35% of the amount raised by our Company through the Offer and Pre-IPO Placement. Consequently, we may be required to explore a range of options to raise requisite capital, including utilizing our internal accruals and/or seeking debt, including from third party lenders or institutions.

There is no assurance that we will be able to successfully integrate the acquired businesses, generate substantial revenue, or achieve any expected benefits on a timely basis or at all.

31. Our inability to meet our obligations, including financial and restrictive covenants, under our financing arrangements could adversely affect our business, results of operations, financial condition and cash flows.

As of October 31, 2025, our total aggregate secured and unsecured borrowings amounted to ₹6,308.60 million.

We have entered into agreements for short-term and long-term loans, working capital facilities and other borrowings. Our ability to meet our obligations under our financing arrangements and repayment of our outstanding borrowings will depend primarily on the cash generated by our business. Our financing agreements generally include a variety of conditions and covenants that require us to obtain consents from certain of our lenders, prior to carrying out certain activities and entering into certain transactions such as:

• any change in the capital structure, shareholding pattern, ownership, management, or control; • any amendments to constitutional documents; • undertaking any merger, amalgamation or reconstruction; and • prior repayment/ pre-payment of credit facility.

These covenants vary depending on the requirements of the financial institution extending the loan and the conditions negotiated under each financing document, and may restrict or delay certain actions or initiatives that we may propose to take from time to time. We have obtained necessary consents from our lenders for the Offer and other related actions.

In the event we fail to service our debt obligations, our lenders have the right to enforce the security in respect of our secured borrowings and dispose of our assets to recover the amounts due from us. If we lose ownership or control of all or some of the assets as a result of the enforcement of security by a lender, our business, results of operations, financial condition, cash flows and ability to make distributions to our shareholders would be adversely affected.

Our ability to make payments on our indebtedness will depend on our future performance and our ability to generate cash, which to a certain extent is subject to general economic, financial, competitive, legislative, legal, 72regulatory and other factors, many of which are beyond our control. If our future cash flows from operations and other capital resources are insufficient to pay our debt obligations, meet our contractual obligations, or to fund our other liquidity needs, we may be forced to sell assets or attempt to restructure or refinance our existing indebtedness. Any refinancing of our debt could be at higher interest rates and may require us to comply with more onerous covenants, which could further restrict our business and operations. In addition, any failure to make payments of interest and principal on our outstanding indebtedness on a timely basis would likely result in a reduction of our creditworthiness and/or any credit rating we may hold, which could harm our ability to incur additional indebtedness on acceptable terms. While we have not experienced any instances of non-compliance with financial or restrictive covenants under our financing agreements that have materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the past three Financial Years, we cannot assure you that we will continue to be in compliance with these financial or restrictive covenants in the future, which may adversely affect our business, results of operations, financial condition and cash flows.

32. Our operations are labour intensive and could be adversely affected by strikes, labour unrest or labour unions. Further, we appoint contract labour through independent contractors for carrying out certain of our operations and we may be held responsible for paying the wages of such workers if the independent contractors through whom such workers are hired default on their obligations, and such obligations could have an adverse effect on our business, results of operations, financial condition and cash flows.

Our operations are labour intensive and we employ a large workforce comprising 1,892 full-time employees, 1,834 employees on a contractual basis, 55 trainees, 432 apprentices and 325 fixed term employees, as of September 30,

2025. For details, see “Our Business – Description of our Business – Employees” on page 320. Any strikes, labour unrest or labour union activities directed against us could directly or indirectly prevent or hinder our normal operating activities, and, if not resolved in a timely manner, could lead to work stoppages and disruptions in our operations. We have not faced any instances of strikes, labour unrest or labour union activities for the six months period ended September 30, 2025 and the past three Financial Years. However, we cannot assure you that we will not experience any strikes, labour unrest, labour union activities or other disruptions relating to our workforce in the future, which may adversely affect our business, results of operations, financial condition and cash flows.

Additionally, we are subject to several ongoing proceedings under the Industrial Disputes Act, 1947 initiated by certain of our former employees and cannot assure you that such proceedings will be resolved in our favour.

In order to retain flexibility due to seasonality in our business and to control costs, in addition to our employees, we appoint independent contractors who in turn engage on-site contract labour for performance of certain of our ancillary operations, including on-site job works. Although we do not engage these labourers directly, we may be held responsible for any wage payments to be made to such labourers in the event of default by such independent contractors. The table below sets out details relating to our workers employed on a contractual basis, for the periods/years indicated:

Particulars As of September 30, As of March 31, 2025 2024 2025 2024 2023 Number of workers employed on a contractual basis 1,834 1,173 1,330 1,335 1,409 Total number of employees 4,538 3,582 3,780 3,448 3,448 Number of workers employed on a contractual 40.41 32.75 35.19 38.72 40.86 basis, as a percentage of our total number of employees (%) Any requirement to fund their wage requirements may have an adverse effect on our business, results of operations, financial condition and cash flows. In addition, under the Contract Labour (Regulation and Abolition) Act, 1970, as amended, we may be required to absorb such contract labourers (as prescribed under the regulations) as permanent employees. Thus, an order from a regulatory body or court in this regard may have an adverse effect on our business, results of operations, financial condition and cash flows.

33. Our failure to identify and understand evolving industry trends and preferences and to adopt new technologies and develop new products to meet customer demands may adversely affect our business, results of operations, financial condition and cash flows.

Our success depends on our ability to identify industry trends and develop, introduce, manufacture and deliver products and solutions which are in line with customer demands. Our ability to anticipate changes in technology and regulatory standards and to develop and introduce new and enhanced products on a timely basis is a significant factor in our ability to remain competitive. There can be no assurance that we will be able to secure the necessary 73technological knowledge that will allow us to adopt new technologies and develop our product portfolio to keep pace with evolving technological requirements of products within the Aerospace Segment and Consumer Segment.

The cost of implementing new technologies and related technology expenditures could also be significant and higher than initially anticipated. We are also subject to the risks generally associated with new product introductions, including lack of market acceptance, delays in product development and failure of products to operate properly. We may also incur capital expenditures to develop products to meet customer demands and those demands may be delayed at the customers’ end due to delays in product launches. While we have not faced any such instances of failures that have materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the past three Financial Years, a failure by our customers to successfully launch new product programs, could adversely affect our business, results of operations, financial condition and cash flows. See also “Our Business – Description of Our Business – Engineering” on page 317.

34. Certain of our Promoters, Directors, Key Managerial Personnel and Senior Management may be interested in our Company other than in terms of remuneration and reimbursement of expenses, and this may result in conflict of interest with us. Our Promoters and certain of our Directors may be involved in ventures which are engaged in the same line of activity or business as that of our Company and this may result in conflicts of interest with us.

In addition to the remuneration paid by our Company and/or Subsidiaries, as applicable, our Promoters, Directors, Key Managerial Personnel and Senior Management are also interested in our Company to the extent of their shareholding in our Company, employee stock options, dividends, bonuses and other distribution.

We cannot assure you that there will not be any conflict of interest between our Promoters, Directors, Key Managerial Personnel and Senior Management and that of our Company. As shareholders of our Company, our Promoters, Directors, Key Managerial Personnel and Senior Management, as the case may be, may take actions with respect to our business which may be in conflict with the interests of our Company or the minority shareholders. Apart from our Non-Executive Director, Ajay Aravind Prabhu, being a director of the trustee of one of our Shareholders, no other instances of such conflict of interests have occurred for the six months period ended September 30, 2025 and the past three Financial Years. For further information on the interests of our Promoters, Directors, Key Managerial Personnel and Senior Management other than their remuneration or reimbursement of expenses in the ordinary course of business, see “Our Management” on page 360.

35. Pricing pressure from OEM customers may adversely affect our profitability, which may in turn have an adverse effect on our business, results of operations, financial condition and cash flows.

Pricing pressure from OEM customers is prevalent in the industry in which we operate. Most major global aerospace companies and consumer companies consistently pursue aggressive price reduction initiatives each year with their suppliers, and such practice is expected to continue in the near future. Pursuing cost-cutting measures while maintaining rigorous quality standards may lead to an erosion of our margins, thereby adversely affecting our profitability.

In addition, estimating amounts of such price reductions is subject to risk and uncertainties, as any price reduction is the result of negotiations and other factors. Accordingly, suppliers like us must be able to reduce our operating costs in order to maintain or grow our existing levels of business. Such price reductions may affect our sales and profit margins. If we are unable to offset customer price reductions in the future through improved operating efficiencies, new manufacturing processes, sourcing alternatives and other cost reduction initiatives, our business, results of operations, financial condition and cash flows may be adversely affected.

Further, our business is capital intensive, requiring us to maintain a large fixed cost base. Therefore, our profitability is dependent, in part, on our ability to spread fixed costs over higher sales volume. However, our customers generally negotiate for larger discounts in price as the volume of their orders increase. In addition, a significant portion of our products are customized to specific customer requirements, which requires us to incur significant costs in setting up our capabilities to manufacture these products, which may or may not be fully recovered from the customers. While we have not faced such instances for the six months period ended September 30, 2025 and the past three Financial Years, if we are unable to generate sufficient production, cost savings in the future to offset price reductions or if there is any reduction in consumer demand for aircrafts and consumer products, which will result in decreased sales, our business, results of operations, financial condition and cash flows may be adversely affected.

7436. Our failure to keep our technical knowledge confidential could erode our competitive advantage.

We possess certain technical knowledge about our products, including technical knowledge relating to process technology. Our joint ventures, including SQuAD Forging India Private Limited, Aerospace Processing India Private Limited and Aequs Cookware Private Limited, have enhanced our technological capabilities to develop new products and deliver engineering solutions. For details, see “Our Business – Our Strengths – Advanced and vertically integrated precision manufacturing capabilities” on page 294. Our technical knowledge is one of our key assets, which may not be adequately protected by intellectual property rights such as patent registration. Thus, as some of our technical knowledge can only be protected by secrecy, we cannot assure you that our technical knowledge will remain confidential in the long run.

Even if all reasonable precautions, whether contractual or otherwise, are taken to protect confidential technical knowledge of our products and business, there is still a danger that certain proprietary knowledge may be leaked, either inadvertently or willfully, at various stages of the production process. A significant number of our employees have access to confidential technical and product information and there can be no assurance that this information will remain confidential. Moreover, certain of our employees may leave us and join our various competitors. We have not faced any instance of leakage of technical knowledge which has materially and adversely affected our financial condition for the six months period ended September 30, 2025 and the past three Financial Years. While we undertake measures such as entering into non-disclosure agreements at the time of employee onboarding, protecting data through multiple layers of authentication, restricting data access to onsite locations with remote access permitted only through secure virtual private networks, and ensuring its effective transfer across our workforce by conducting regular training sessions and awareness programs on data security protocols, we may still be unable to protect our technical knowledge adequately. In the event that the confidential technical information in respect of our products or business becomes available to third parties or to the general public, any competitive advantage that we may have over other companies in the Aerospace Segment and Consumer Segment could be harmed. If a competitor is able to reproduce or otherwise capitalize on our technology, it may be difficult or expensive for us to obtain necessary legal protection. Consequently, any leakage of confidential technical information could have an adverse effect on our business, results of operations, financial condition, cash flows and future prospects.

37. We regularly work with hazardous materials and activities in our operations can be dangerous, which may cause injuries to people or property.

Our business requires employees to work under potentially dangerous circumstances or with flammable materials.

For example, if improperly handled, molten metal or molten polymer/plastic material can seriously hurt or even cause fatal injuries, and cause damage to our properties and the properties of others. Further, chemicals used for coating are hazardous and may pose health risks to employees or other persons. While we continuously ensure compliance with all requisite safety requirements and standards, our operations are subject to significant hazards, including explosions, fires, mechanical failures and other operational problems, inclement weather and natural disasters, discharges or releases of hazardous substances, chemicals or gases, and other environmental risks. Such hazards may result in personal injury and loss of life, catastrophic damage or destruction of property and equipment as well as environmental damage, which could result in a suspension of our operations and the imposition of civil or criminal liabilities. For instance, in December 2022, the production at our manufacturing facility operated by API was halted due to a fire which broke out. While this disruption did not have any material impact on our operations, any such disruptions in the future could adversely affect our business, results of operations, financial condition, and cash flows.

While we maintain insurance coverage in amounts that would be adequate to cover the risks typically associated with the operations of our business, any instances of personal injury and loss of life, catastrophic damage or destruction of property and equipment may not be fully compensated by insurance. For further details, see “- We may not be sufficiently protected or insured for certain losses that we may incur or claims that we may face against us, which may adversely affect our business, results of operations, financial condition and cash flows” on page 82.

For instance, in the Financial Year 2024, one of our contract labourer succumbed to injuries suffered by him due to a fall from the rooftop of a unit operated by one of our Joint Ventures, SQuAD Forging India Private Limited.

We have since strengthened mandatory safety briefing before commencement of work, including briefing about hazards, risks and necessary control measures, usage of appropriate safety equipment, conducted relevant health tests for workers who are involved in working in certain activities where necessary, and conducted training for contract employees for their safety. Apart from the above-mentioned incident, we have had occasional instances of accidents which have caused injuries to our personnel at the units in the manufacturing clusters we operate in 75and facilities. These incidents have not materially and adversely affected our business during the six months period ended September 30, 2025 and the past three Financial Years. Any accident or injury that occurs in the course of our operations could result in disruptions to our business and have legal and regulatory consequences. Further, we may be required to compensate such individuals or incur other costs and liabilities. While we have not faced any such legal or regulatory consequences in relation to any labour related matters for the six months period ended September 30, 2025 and the past three Financial Years, if any claims or lawsuits, individually or in the aggregate, are resolved against us in the future, our business, results of operations, financial condition and cash flows could be adversely affected.

38. Any difficulties in identifying, consummating and integrating acquisitions, investments or alliances or undertaking any internal restructuring may expose us to potential risks and have an adverse effect on our business, results of operations, financial condition and cash flows.

We have in the past, and may in the future, make acquisitions and investments and enter into strategic alliances to further expand our business. For example, we have entered into long-term joint ventures with global companies such as Magellan Aerospace Limited, Aubert & Duval SAS and Tramontina, which has enhanced our manufacturing capabilities and enabling us to drive sustained growth. Our possible future acquisitions, investments or strategic alliances may also expose us to other potential risks, including risks associated with unforeseen or hidden liabilities, sharing proprietary information, the diversion of resources from our existing businesses and technologies, our inability to generate sufficient revenue to offset the costs, expenses, and debt incurred in relation to the acquisition, investment or alliance, and potential loss of, or harm to, relationships with customers and employees as a result of our integration of new businesses. As part of our business restructuring, for generation of business synergies and operational efficiencies, we may continue to explore options to merge, consolidate or wind-up some of our Indian and overseas entities, subject to compliance with applicable laws and receipt of necessary approvals, in their respective jurisdictions. Moreover, acquiring, investing in or entering into strategic alliances with companies based outside of India involves additional risks, including those related to integration of operations across different cultures and languages, inability to obtain the necessary regulatory approvals in countries in which we seek to consummate acquisitions, currency risks, economic, political and regulatory risks and the particular economic, political and regulatory risks associated with specific countries.

Further, identifying suitable acquisitions, investments or alliances can be difficult, time consuming and costly. We cannot assure you that we will be able to identify suitable acquisition opportunities, negotiate favorable terms or successfully acquire identified targets. In addition, strategic alliances that we have entered into, including our long-term joint ventures with Magellan Aerospace Limited, Aubert & Duval SAS and Tramontina, could be discontinued in the future, which in turn may adversely affect our growth prospects. We cannot assure you that any future acquisitions, investments or alliances that we enter into or internal restructuring that we may undertake, will not be unsuccessful, which may adversely affect our business, results of operations, financial condition and cash flows.

Further, if any of the third parties from our strategic alliance, joint venture, acquisition or investments experiences negative publicity or harm to their reputation from events relating to their businesses, we may also suffer negative publicity or harm to our reputation by virtue of our association with any such third party. We cannot assure you that we will be able to prevent, detect, manage or resolve any negative publicity or harm to our reputation arising from such strategic alliance, joint venture, acquisition or investment, which may adversely affect our business, results of operations, financial condition and cash flows.

39. We are unable to trace certain of our historical corporate and secretarial records including forms filed with the RoC. We cannot assure you that regulatory proceedings or actions will not be initiated against us in the future which may impact our financial condition and reputation and we will not be subject to any penalty imposed by the competent regulatory authority in this regard.

Certain corporate records of the Company, including regulatory filings are not traceable as the relevant information was not available in the records maintained by our Company or in the physical records available at the RoC. The

following documents as mentioned hereunder are untraceable:

Sr. Event Documents Particulars of the documents No. date

1. June 12, Form 7B For transfer of 552 equity shares from Jagadish Shivaputrappa 2003 Melligeri to Quality Engineering & Software Technologies Private Limited.

2. June 12, Form 7B For transfer of 50 equity shares from Ajit Aravind Prabhu to Quality 2003 Engineering & Software Technologies Private Limited.

76Sr. Event Documents Particulars of the documents No. date

3. March 24, Challan for Form 2 For the allotment of 1,71,481 equity shares to Quality Engineering & 2006 Software Technologies Private Limited.

4. October Form 7B For transfer of 100 equity shares from Carlyle Asia Venture Partners II 26, 2007 LP to Aravind Shivaputrappa Melligeri.

5. October 1, Board resolution and For approval of change in the registered office from No. 30, Ground 2005 challan for the Form 18 Floor, 7th Cross, Agrahara Dasarahalli, Magadi Main Road, Bengaluru, Karnataka 560 079, India to Meriside Heights, 5th Floor, Nagavarapalya Village, Benniganahalli, K. R. Puram, Hobli, Bengaluru, Karnataka 560 068

6. April 18, Form 1A For change in name of the Company from “Mechanical Training 2006 Acadamy Private Limited” to “QuEST Machining & Manufacturing Private Limited”

7. August 31, Shareholders’ resolution, For the regularisation of Ajay Aravind Prabhu, as non-executive 2003 Form 32 and the director. subsequent challan In this regard, we engaged a firm of independent practicing company secretaries, Prathibha Priya & Associates, that conducted, among others, a physical search of the records in relation to the Company at the offices of the RoC, a digital search of the electronic records in relation to the Company on the portal of the MCA and a physical search of the records maintained by the Company at its Registered Office and other offices and prepared a report on such search dated May 17, 2025 (“PCS Search Report”). However, we have not been able to retrieve such documents and challans and accordingly, have relied on the PCS Search Report and other supporting documents available in our records, including the resolutions passed by our Board or Shareholders in their meetings. Further, our Company has sent a letter to the RoC on May 20, 2025, to inform them about our inability to trace the corporate records required to be filed with them.

Further, we have been unable to trace an acknowledgment received from the RBI in relation to a transfer of 100 Equity Shares from Aravind Shivaputrappa Melligeri to Ajay Prabhu on January 28, 2008. We have requested RBI for a copy of such Form FC-TRS and the subsequent acknowledgment, through the authorized dealer bank at the time of such transfer, i.e., State Bank of India, vide our letter dated March 17, 2025. We have relied on other supporting documents available in our records, including the share transfer form and resolution passed by our Board. For further details, see “Capital Structure – Notes to the Capital Structure – History of build-up of Promoters’ shareholding and lock-in of Promoters’ shareholding – Build-up of Promoters’ shareholding in our Company” on page 127.

While there have been no regulatory proceedings or actions initiated against us in relation to the aforementioned anomalies, non-compliance, inaccuracies or non-availability of the corporate records, we cannot assure you that the relevant corporate records will become available in the future, that regulatory proceedings or actions will not be initiated against us in the future, or that we will not be subject to any penalty imposed by the competent regulatory authority in this respect.

40. Our consumer business is subject to seasonality, which may contribute to fluctuations in our results of operations and financial condition.

Our consumer business is subject to seasonality as we typically see that demand for consumer products is generally highest at the end of the calendar year due to festive seasons. The demand for our exported products also depends on the cyclicality and seasonality of consumer products in each country. We also expect our period-to-period results of operations to vary based on our operating costs, which we anticipate will increase significantly in future periods as we, among other things, design, develop, and manufacture newer products, expand and further equip the units in the manufacturing clusters we operate in and facilities to manufacture such products, open new manufacturing clusters and facilities, increase our sales and marketing activities, and increase our general and administrative functions to support our growing operations. Any increases in our operating costs may also lead to a commensurate increase in the price of our products which may lead to a resultant decrease in demand for our products. Due to these seasonal fluctuations, our sales and results of operations may vary by quarters, and the sales and results of operations of any given quarter may not be relied upon as indicators of the sales or results of operations of other quarters or of our future performance.

7741. An inability to compete effectively in the competitive aerospace and consumer industries could result in the loss of customers, which could have an adverse effect on our business, results of operations, financial condition and cash flows.

The aerospace and consumer industries are highly competitive, and we compete with other manufacturers based on a variety of factors, including pricing, manufacturing capabilities, product quality, features, reliability and safety, technology, innovation and product development time, service levels and reputation. Our competitors may have longer operating histories, greater market penetration and more diverse product portfolios, which may provide them with a competitive advantage over us.

If our competitors’ products surpass ours in terms of quality or performance or are offered at more competitive prices, or if this becomes the prevailing perception among consumers, our profitability and results of operations may be materially and adversely affected, and we may not be able to maintain our current market position or lose market share. Further, increased consolidation among our competitors or between our competitors and any of our OEM customers could allow competitors to further benefit from economies of scale, offer more comprehensive product portfolios and increase the size of their serviceable markets. Such consolidation may enable our competitors to develop products that compete with us at a lower cost, which may adversely affect our profit margins. Any of these developments, alone or in combination, could have an adverse effect on our business, results of operations, financial condition and cash flows.

42. We are exposed to counterparty credit risk and any delay in receiving payments or non-receipt of payments may adversely affect our business, results of operations, financial condition and cash flows.

Due to the nature of, and the inherent risks in, the agreements and arrangements with our customers, we are subject to counterparty credit risk, including significant delays in receiving payments or non-receipt of payments, which may adversely affect our cash flow and results of operations. We cannot assure you that we will be able to accurately assess the creditworthiness of our customers. Further, macroeconomic conditions, which are beyond our control, could also result in financial difficulties for our customers, including limited access to the credit markets, insolvency or bankruptcy. Such conditions could cause our customers to delay payment, request modifications to their payment terms, or default on their payment obligations to us, all of which could increase our trade receivables and/or loss allowances. The following table sets forth our credit loss allowances for doubtful debts and trade receivables for the periods/years indicated:

Particulars As of September 30, As of March 31, 2025 2024 2025 2024 2023 Loss allowance (₹ in million) 30.12 25.98 30.44 26.28 40.54 Trade receivables (₹ in million) 1,812.56 1,621.85 1,566.04 1,368.85 1,071.28 Timely collection of payments from customers also depends on our ability to complete our contractual commitments and subsequently invoice and collect from our customers. If we are unable to meet our contractual obligations, we may experience delays in the collection of, or be unable to collect, our customer balances, which could adversely affect our business, results of operations, financial condition and cash flows.

43. Any disruptions in the availability of electricity, fuel and water at the units in the manufacturing clusters we operate in or facilities may adversely affect our business operations.

Our manufacturing operations require a significant amount and continuous supply of electricity, fuel and water and any shortage or non-availability may adversely affect our operations. Moreover, prolonged disruptions in the availability of electricity, fuel and water may require us to suspend our operations. The table below sets out our power and fuel charges for the periods/years indicated:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Power and fuel (₹ in million) 119.91 129.26 241.13 294.49 254.67 Power and fuel, as a percentage of total expenses (%) 2.49 3.09 2.83 3.49 3.28 We depend on Aequs SEZ Private Limited, one of our Group Companies, and the developer of the SEZ in which the units in the manufacturing clusters we operate in are situated, for our electricity and water requirements. Aequs SEZ Private Limited has a deemed distribution licensee under the Electricity Act, 2003. Additionally, we source our fuel requirements from Aequs SEZ Private Limited. We may also be exposed to regional risks which may 78disrupt the availability of electricity, fuel and water at the units in the manufacturing clusters, which could adversely affect our business, results of operations, financial condition and cash flows. For further details, see “- All the units in the manufacturing clusters that we operate in, in India are located in the state of Karnataka, which may expose us to regional risks that could adversely affect our business, results of operations, financial condition, and cash flows” on page 42. For the six months period ended September 30, 2025 and the past three Financial Years, we have not faced any instances of power cuts or shortage of fuel or water that has required us to shut down or suspend operations at any of the units in the manufacturing clusters that have materially and adversely affected our results of operations. Any failure on our part to obtain alternate sources of electricity, fuel or water, in a timely fashion, and in a cost-effective manner could adversely affect our business, results of operations, financial condition and cash flows.

44. We have contingent liabilities and commitments, and our financial condition could be adversely affected if these contingent liabilities or commitments materialize.

We have created provisions for certain contingent liabilities in our Restated Consolidated Financial Information.

The following table sets forth the contingent liabilities in our Restated Consolidated Financial Information: (in ₹ million) Particulars As of September 30, As of March 31, 2025 2024 2025 2024 2023 Labour related matters 73.10 64.37 68.33 60.00 52.00 Tax matters 861.22 861.22 861.22 844.31 844.31 Total 934.32 925.59 929.55 904.31 896.31 In addition, our estimated amount of contracts remaining to be executed on capital account net of advances and not provided for, as disclosed in our Restated Consolidated Financial Information, amounted to ₹1,178.84 million as of September 30, 2025.

We cannot assure you that we will not incur similar or increased levels of contingent liabilities or capital commitments in the future. If any of these contingent liabilities or capital commitments materialize, our financial condition and results of operation may be adversely affected. For further details on our contingent liabilities and capital commitments, see “Financial Information – Restated Consolidated Financial Information – Note 30 – Contingent liabilities” on page 465.

45. The success of our business depends substantially on our management team and operational workforce. Our inability to attract or retain such manpower could adversely affect our business and operations.

Our business and financial performance depends largely on the efforts and abilities of our Senior Management and Key Managerial Personnel. From time to time, there may be changes in our management team or other key employees to enhance the skills of our teams or as a result of attrition. We cannot assure you that we will continue to retain any or all of the key members of our management. Further, we cannot assure you that if one or more key members of our management are unable or unwilling to continue in their present positions, that we would be able to replace such member(s) in a timely and cost-effective manner.

Our success also depends on our ability to recruit, develop and retain qualified and skilled personnel, for all our lines of business. We compete in the market to attract and retain skilled personnel, in areas such as engineering, technology, sales, marketing and operations.

The table below sets forth the attrition rates of our full-time employees, Key Managerial Personnel and Senior Management for the periods/years indicated:

Particular Attrition Number Attrition Attrition Number of Attrition Attrition Number of Attrition rate s (Full-time of full- rate (Full- (Key Key rate (Key (Senior Senior (Senior employees time time Manageria Manageria Managerial Management Managemen Management)* ) employee employees)* l l Personnel Personnel)* ) t * (%) s * (%) Personnel) * (%) Six months 125 1,892 6.61% - 3 NA - 3 NA period ended September 30, 2025 Six months 151 1,780 8.48% - 3 NA - 3 NA period 79Particular Attrition Number Attrition Attrition Number of Attrition Attrition Number of Attrition rate s (Full-time of full- rate (Full- (Key Key rate (Key (Senior Senior (Senior employees time time Manageria Manageria Managerial Management Managemen Management)* ) employee employees)* l l Personnel Personnel)* ) t * (%) s * (%) Personnel) * (%) ended September 30, 2024 Financial 294 1,785 16.47% - 3 NA - 3 NA Year 2025 Financial 351 1,587 22.12% - 3 NA 2 2 100.00% Year 2024 Financial 270 1,403 19.24% - 3 NA 1 4 25.00% Year 2023 *The number of full-time employees / Key Managerial Personnel / Senior Management are as on last date of the financial year.

**Attrition rates for full-time employees / Key Managerial Personnel / Senior Management is calculated as the percentage of annual attrition of full-time employees / Key Managerial Personnel / Senior Management in a particular financial year to the number of full-time employees / Key Managerial Personnel / Senior Management present at the end of the financial year.

If we fail to identify, recruit and integrate strategic personnel, our business could be adversely affected. Any loss of members of our Senior Management or Key Managerial Personnel could significantly delay or prevent the achievement of our business objectives, affect our succession planning and could harm our business. We may need to invest significant amounts of cash and equity to attract and retain new employees, Key Managerial Personnel or Senior Management, and we may never realize returns on these investments. If we are not able to retain and motivate our current personnel or effectively integrate and retain employees, our ability to achieve our strategic objectives, and our business could be adversely affected.

46. Significant disruptions of information technology systems or breaches of data security could have an adverse effect on our business, results of operations, financial condition and cash flows.

We depend upon information technology systems for our business operations, including in particular our manufacturing processes across the units in the manufacturing clusters we operate in and facilities. Our IT systems are potentially vulnerable to system inadequacies, network failure, hardware failure, operating failures, service interruptions or failures, security breaches, malicious intrusions or cyber-attacks from a variety of sources. Cyber- attacks are growing in their frequency, sophistication and intensity, and are becoming increasingly difficult to detect, mitigate or prevent. Cyber-attacks come in many forms, including the deployment of harmful malware, exploitation of vulnerabilities, denial-of-service attacks, the use of social engineering and other means to compromise the confidentiality, integrity and availability of our IT systems, confidential information and other data. Cyber-attacks targeted at our information technology systems may affect our business operations by interfering with, among others, our (i) manufacturing automation systems which we utilize to automate our manufacturing processes at the units in the manufacturing clusters we operate in and facilities, and (ii) enterprise resource planning systems which we utilize to manage our raw material and inventory levels. While we have not experienced any significant disruptions to our information technology systems due to cyber-attacks for the six months period ended September 30, 2025 and the past three Financial Years, we cannot assure you that we will not encounter any such disruptions in the future. Any such disruption may result in the loss of key information and disruption of production and business processes, which could adversely affect our business, results of operations, financial condition and cash flows.

Our systems are also potentially vulnerable to data security breaches, whether by employees or others that may expose sensitive data, including personal data of customers, to unauthorized persons. Such data security breaches could lead to unauthorized access to our systems, misappropriation of data and unforeseen disclosure or transfer of data. While we have not experienced any significant data breaches for the six months period ended September 30, 2025 and the past three Financial Years, any such security breaches could have an adverse effect on our business, results of operations, financial condition and cash flows.

47. Any delay in payment of statutory dues by our Company in the future, may result in the imposition of penalties and in turn may have an adverse effect on our Company’s business, financial condition, results of operation and cash flows.

Our Company is required to pay certain statutory dues including provident fund contributions and employee state insurance contributions as indicated in the tables below. The tables below set forth the details of the statutory dues paid by our Company, including in relation to our employees for the periods/years indicated below:

80Nature of payment For the six months period ended For the six months period ended September 30, 2025 September 30, 2024 Statutory Dues Statutory dues Statutory Dues Statutory dues Paid unpaid Paid unpaid (₹ in million) (₹ in million) Employee State Insurance 0.09 Nil 0.07 Nil Provident Fund 7.01 Nil 4.99 Nil Professional Tax 0.18 Nil 0.14 Nil Tax Deducted at Source 14.80 Nil 8.10 Nil Labour Welfare Fund - Nil - Nil Goods and Service Tax Nil Nil Nil Nil Total 22.08 Nil 13.30 Nil Nature of payment For the Financial Year For the Financial Year For the Financial Year ended March 31, 2025 ended March 31, 2024 ended March 31, 2023 Statutory Statutory Statutory Statutory Statutory Statutory Dues Paid dues unpaid Dues Paid dues unpaid Dues Paid dues unpaid (₹ in million) (₹ in million) (₹ in million) Employee State 0.13 Nil 0.28 Nil 0.39 Nil Insurance Provident Fund 10.19 Nil 20.40 Nil 20.42 Nil Professional Tax 0.28 Nil 0.50 Nil 0.62 Nil Tax Deducted at Source 27.82 Nil 49.28 Nil 40.58 Nil Labour Welfare Fund 0.01 Nil 0.02 Nil 0.02 Nil Goods and Service Tax Nil Nil 6.12 Nil 0.14 Nil Total 38.43 - 76.60 - 62.17 - Nature of payment For the six months period ended For the six months period ended September 30, 2025 September 30, 2024 Number of Number of Number of Number of employees employees employees employees (Statutory Dues (Statutory dues (Statutory Dues (Statutory dues Paid)* unpaid) Paid)* unpaid) (₹ in million) (₹ in million) Employee State Insurance 20 Nil 15 Nil Provident Fund 174 Nil 136 Nil Professional Tax 148 Nil 116 Nil Labour Welfare Fund Nil Nil Nil Nil Nature of payment For the Financial Year For the Financial Year For the Financial Year ended March 31, 2025 ended March 31, 2024 ended March 31, 2023 Number of Number of Number of Number of Number of Number of employees employees employees employees employees employees (Statutory (Statutory (Statutory (Statutory (Statutory (Statutory Dues Paid)* dues unpaid) Dues Paid)* dues unpaid) Dues Paid)* dues unpaid) (₹ in million) (₹ in million) (₹ in million) Employee State Insurance 14 - 32 - 45 - Provident Fund 138 - 266 - 266 - Professional Tax 119 - 191 - 260 - Labour Welfare Fund 130 - 262 - 266 - * The number of employees represents the average across all months within the respective year during which statutory dues were applicable.

While we have faced instances of slight delays in payment of statutory dues during the Financial Year 2025 (which did not have any adverse effect on our business), we have not faced any other instances of delays in payment of statutory dues for the six months period ended September 30, 2025 and 2024 and in the Financial Years 2024 and

2023. If we are unable to pay our statutory dues on time in the future, we could be subjected to penalties which could adversely affect our business, results of operations, financial condition and cash flows.

48. We track certain operational and key business metrics with internal systems and tools. Certain of our operational metrics are subject to inherent challenges in measurement which may adversely affect our business and reputation.

We track certain operational and key business metrics (including Net Worth, Return on Net Worth, Net Asset Value per Equity Share, EBITDA, EBIDTA Margin, EBITDA – Aerospace Segment, EBITDA – Aerospace 81Segment Margin %, EBITDA – Consumer Segment, EBITDA – Consumer Segment Margin % and PAT Margin) with internal systems and tools and which may differ from estimates or similar metrics published by third parties due to differences in sources, methodologies, or the assumptions on which we rely. Our methodologies for tracking these metrics may change over time, which could result in unexpected changes to our metrics, including the metrics we publicly disclose. If the internal systems and tools we use to track these metrics undercount or over count performance or contain algorithmic or other technical errors, the data we report may not be accurate.

Further, these are supplemental measure of our performance and liquidity that is not required by, or presented in accordance with, Ind AS, IFRS or US GAAP. Further, these metrics are not a measurement of our financial performance or liquidity under Ind AS, IFRS or US GAAP and should not be considered in isolation or construed as an alternative to cash flows, profit/(loss) for the year or any other measure of financial performance or as an indicator of our operating performance, liquidity, profitability or cash flows generated by operating, investing or financing activities derived in accordance with Ind AS, IFRS or US GAAP. Although these non-GAAP financial measures are not a measure of performance calculated in accordance with applicable accounting standards, our management believes that they are useful to an investor in evaluating us, as these metrics are widely used measured to evaluate an entity’s operating performance. In addition, these are not standardized terms, hence a direct comparison of these measures between companies may not be possible. Other companies may calculate these measures differently from us, limiting its usefulness as a comparative measure. If our operating metrics are not accurate representations of our business, if investors do not perceive our operating metrics to be accurate, or if we discover material inaccuracies with respect to these figures, we expect that our business, reputation, results of operations, financial condition and cash flows would be adversely affected. For further details, see “Our Business” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” on pages 288 and 539, respectively.

49. We have availed loans from related parties (unsecured) which may be recalled by lenders at any time in the future. If we are unable to repay our outstanding borrowings in a timely manner or at all, our business, prospects, results of operations, financial condition and cash flows will be adversely affected.

As of October 31, 2025, few of our subsidiaries had outstanding loans from related parties (unsecured) of ₹329.31 million, amounting to 5.22% of our total borrowings. For instance, one of our Material Subsidiaries, Aequs Aerospace B.V., has also availed loans from related parties (unsecured). Such loans from related parties

(unsecured) are repayable on demand and therefore loans from related parties (unsecured) may be recalled at any time in the future, which may require us to repay the entirety of the unsecured loan amount together with accrued interest. None of the Net Proceeds of the Offer shall be utilised to pay or repay loans/advances, directly or indirectly, availed from any related party of the Company. For details, please see “Financial Indebtedness” on page 577. We may not be able to generate sufficient funds at short notice to be able to repay such borrowings and may be required to resort to refinancing such loans at a higher rate of interest and on terms not favourable to us.

We have not faced any such instances of unsecured borrowings being recalled by lenders that have caused us to default on our debt obligations and/or materially and adversely affected our results of operations for the six months period ended September 30, 2025 and the past three Financial Years. Our ability to service our debt obligations and to repay our outstanding borrowings depends primarily on the cash flow generated by our business. We may not be able to pay our debt obligations in a timely manner or at all. Any such default could have an adverse effect on our business, prospects, results of operations, financial condition and cash flows.

50. We may not be sufficiently protected or insured for certain losses that we may incur or claims that we may face against us, which may adversely affect our business, results of operations, financial condition and cash flows.

Our principal types of coverage include insurance policies in relation to, among others, electronic equipment, burglary, machinery, fire and special perils, marine cargo, commercial general liability. The following table sets out details of our insurance coverage on our tangible assets as of the periods/years indicated:

Particulars As of As of September September March 31, March 31, March 31, 30, 2025 30, 2024 2025 2024 2023 Amount of insured assets (₹ in million) 14,339.57 10,730.56 11,877.58 8,969.45 6,389.63 Amount of insurance obtained (₹ in million) 19,449.93 14,287.84 19,449.82 14,287.84 13.214.18 Insured assets as percentage of total assets 67.18% 57.58% 63.86% 49.20% 48.34% Insurance coverage as a percentage to 135.64% 132.92% 163.75% 159.29% 206.81% insured assets Amount of uninsured assets (₹ in million) 7,003.94 7,904.44 6,720.82 9,260.38 6,827.28 82While we maintain insurance coverage in amounts that we believe are consistent with industry norms and would be adequate to cover the normal risks associated with the operation of our business, our insurance policies do not cover all risks. In particular, we have insurance coverage for liabilities and expenses arising from product liability, warranty and recall, among other events. In addition, we cannot assure you that any claim under the insurance policies maintained by us will be honored fully, in part or at all, or on time, or that we have taken out sufficient insurance to cover all our potential losses. For instance, certain of our products supplied to one of our key customers, Hasbro, during the Financial Year 2020-2021 were voluntarily recalled due to its high ‘lead’ content.

Our Company initiated an insurance claim for ₹72.80 million towards the cost incurred on such recall (for which Hasbro had raised various debit notes on one of our subsidiaries, AEPPL). The insurance claim was partially honored during Financial Year 2023 and the insurer paid an amount of ₹32.40 million (representing 44.51% of the amount of insurance claim initiated by us) to AEPPL. Apart from this instance, we have not faced any such instances of insurance claims not being honored or insufficient insurance coverage, for the six months period ended September 30, 2025 and the past three Financial Years, that materially and adversely affected our results of operations.

In particular, our business and assets are subject to hazards inherent in manufacturing clusters and facilities and could suffer damage from risks of equipment failure, work accidents, fire, earthquakes, flood and other force majeure events, acts of terrorism and explosions including hazards that may cause injury and loss of life, severe damage to and the destruction of property and equipment and environmental damage. Any accident at our facilities may result in personal injury or loss of life, substantial damage to or destruction of property and equipment resulting in the suspension of operations. Such damage and losses may not be fully compensated by insurance.

If any or all of our facilities are damaged in whole or in part or we are subject to litigation or claims or our operations are interrupted for a sustained period, we cannot assure you that our insurance policies will be adequate to cover the losses that may be incurred as a result of such interruption or the costs of repairing or replacing the damaged facilities. To the extent that we suffer loss or damage for which we have not obtained or maintained insurance, or which is not covered by insurance, which exceeds our insurance coverage or where our insurance claims are rejected, the loss would have to be borne by us. If we suffer a large uninsured loss or if any insured loss suffered by us significantly exceeds our insurance coverage, our business, results of operations, financial condition and cash flows may be adversely affected.

51. We do not own our Registered Office and Corporate Office and certain of the units in the manufacturing clusters we operate in and facilities, and thus we are exposed to the risks associated with leasing real estate and any adverse developments could affect our business, results of operations, financial condition and cash flows.

We do not own our Registered Office and Corporate Office and certain of the units in the manufacturing clusters we operate in and facilities, which are all occupied by us on a long-term leasehold basis. In relation to our Registered Office and Corporate Office and certain of the units in the manufacturing clusters we operate in and facilities which are occupied by us on a leasehold basis, there is no conflict of interest between us and our lessors, and all such lease arrangements which we entered into with related parties were at arm’s length and in compliance with applicable laws and regulations. For further details, see “Our Business – Description of Our Business – Manufacturing Clusters and Facilities” and “Our Business – Description of Our Business – Our Properties” on pages 312 and 322, respectively.

The lease periods and rental amounts for these properties vary on the basis of their locations. We cannot assure you that we will be able to renew our leases on acceptable terms or at all. In the event that we are required to vacate our current premises, we would be required to make alternative arrangements for new offices and other infrastructure and we cannot assure that the new arrangements will be on acceptable terms. If we are required to relocate our business operations or shut down our manufacturing units during this period, we may suffer a disruption in our operations or have to pay increased charges, which could have an adverse effect on our business, prospects, results of operations financial condition and cash flows. We have not faced any such instances where our leases were not renewed for the six months period ended September 30, 2025 and the past three Financial Years. In addition, lease agreements are required to be duly registered and adequately stamped under Indian law and if any of our lease agreements are not duly registered and adequately stamped, we may face challenges in enforcing them. Further, such stamp duty may not be accepted as evidence in a court of law and we may be required to pay penalties for inadequate stamp duty.

52. Information relating to the installed manufacturing capacity, actual production and capacity utilization of the segments in the manufacturing clusters in which we operate and facilities included in this Prospectus are based on various assumptions and estimates and future production and capacity 83may vary and actual productions level and rates may differ significantly.

The installed capacity and capacity utilization details installed manufacturing capacity, actual production and capacity utilization of the segments within the manufacturing clusters in which we operate and facilities, which are included in this Prospectus, are based on various assumptions and estimates of our management that have been taken into account by an independent chartered engineer in the calculation of the installed manufacturing capacity, actual production and capacity utilization of the units in the manufacturing clusters we operate in and facilities.

For further details on the independent chartered engineer, see “General Information – Experts to the Offer” on page 111. These assumptions and estimates include availability of raw materials, expected unit utilization levels, downtime resulting from scheduled maintenance activities, unscheduled breakdowns and expected operational efficiencies. Further, capacity utilization has been calculated on the basis of actual production during the relevant period divided by the aggregate installed capacity of relevant manufacturing clusters and facilities as of at the end of the relevant period. Accordingly, actual production levels and rates may differ significantly from the installed capacity information of our facilities or historical installed capacity information of our facilities depending on the product type. Undue reliance should therefore not be placed on our historical installed capacity and capacity utilization information for our existing facilities included in this Prospectus.

53. Our success depends on our ability to develop new products within the Aerospace Segment and Consumer Segment in accordance with our customers’ niche requirements, in a timely manner. If our design, engineering and development, and execution efforts do not succeed in a timely manner or at all, or if the products we develop do not perform as expected, our business, financial condition, results of operations and cash flows could be adversely affected.

Our success significantly depends on our ability to develop new products within the Aerospace Segment and Consumer Segment in accordance with our customers’ niche requirements, in a timely manner. The development processes for new products within the Aerospace Segment and Consumer Segment in accordance with our customers’ niche requirements include, among others, investments in engineers and other human capital, investments in tangibles assets and machinery, and is time-consuming and costly. This requires us to successfully develop prototypes based on our customers’ specific requirements, test and manufacture products within the Aerospace Segment and Consumer Segment as per the niche requirements of our customers, and obtain the necessary regulatory approvals while complying with applicable regulatory and safety standards. Prior to initiating commercial manufacturing for any project, we are required to obtain a range of infrastructure, technical, and quality-related approvals from certain of our customers. In certain cases, the receipt of these final approvals has been subject to delays beyond our originally projected timelines. For example, in one instance, delays in process development and in obtaining requisite customer approvals resulted in a corresponding postponement of the qualification and process validation stages. Given the intricate and multi-layered nature of such processes, these timeline deviations and overruns occur as part of the ordinary course of our operations and are managed in accordance with established quality and compliance protocols. New products within the Aerospace Segment and Consumer Segment, once fully manufactured and tested, may not perform as expected, and necessary regulatory approvals may not be obtained in a timely manner, if at all. Even if we obtain regulatory approvals, we may not be able to successfully and profitably produce these products within the Aerospace Segment and Consumer Segment. For details, see “Our Business – Description of Our Business – Engineering” on page 317.

Moreover, any failure to continue delivering high-quality, innovative and competitive products, meeting regulatory requirements (including emission standards), predicting market demands, or gaining market acceptance could adversely affect our business, results of operations, financial condition and cash flows.

54. This Prospectus contains information from third parties, including an industry report prepared by an independent third-party research agency, Frost & Sullivan (India) Private Limited, which we have commissioned and paid for purposes of confirming our understanding of the industry exclusively in connection with the Offer.

The industry and market information contained in this Prospectus includes information derived from an industry report prepared by Frost & Sullivan (India) Private Limited titled “An Assessment of Aerospace and Consumer PEC Industry” dated November 14, 2025, (the “F&S Report”). The F&S Report has been commissioned and paid for by us for the purposes of confirming our understanding of the industry exclusively in connection with the Offer. We officially engaged F&S in connection with the preparation of the F&S Report pursuant to an engagement letter dated December 10, 2024, as amended by a subsequent engagement letter dated September 8,

2025. The F&S Report uses certain methodologies for market sizing and forecasting, and may include numbers relating to our Company that differ from those we record internally. Accordingly, investors should read the industry-related disclosure in this Prospectus in this context.

84None of our Company, Promoters, Directors, Key Managerial Personnel or the BRLMs are related to F&S.

Further, the paid and commissioned report is not a recommendation to invest or disinvest in our Company and shall not be construed as specialist advice or investment advice. Accordingly, investors should read the industry related disclosures in this Prospectus in this context. Industry sources and publications are also prepared based on information as of specific dates. Industry sources and publications may also base their information on estimates, projections, forecasts and assumptions that may prove to be incorrect. Due to possibly flawed or ineffective collection methods or discrepancies between published information and market practice and other problems, the statistics herein may be inaccurate or may not be comparable to statistics produced for other economies and should not be unduly relied upon. Further, we cannot assure you that they are stated or compiled on the same basis or with the same degree of accuracy as may be the case elsewhere. Statements from third parties that involve estimates are subject to change, and actual amounts may differ significantly from those included in this Prospectus.

Accordingly, investors should not place undue reliance on, or base their investment decision solely on this information. For further details see “Certain Conventions, Use of Financial Information and Market Data and Currency of Presentation” on page 32.

55. We have issued Equity Shares during the preceding 12 months at a price which may be below the Offer Price, and we may continue to issue Equity Shares which are below the Offer Price in the future.

We may have, in the last 12 months prior to filing this Prospectus, issued Equity Shares at a price that could be lower than the Offer Price. For further details, see “Capital Structure – Notes to Capital Structure – Issue of Equity Shares at a price lower than the Offer Price in the last one year (excluding bonus issue)” on page 124.

The prices at which the Equity Shares were issued by us in the past 12 months should not be taken to be indicative of the Price Band, Offer Price and the trading price of our Equity Shares after listing.

56. We cannot assure payment of dividends on the Equity Shares in the future and our ability to pay dividends in the future will depend upon future earnings, financial condition, cash flows, working capital requirements and capital expenditures.

We have a formal dividend policy. Our Company has not declared dividends for the six months period ended September 30, 2025 and the past three Financial Years. Our ability to pay dividends in the future will depend upon our future results of operations, financial condition, cash flows, sufficient profitability, working capital requirements and capital expenditure requirements. We cannot assure you that we will be able to pay dividends on the Equity Shares at any point in the future. For details, see “Dividend Policy” on page 382.

The declaration and payment of dividends will be recommended by the Board of Directors and approved by the Shareholders, at their discretion, subject to the provisions of the Articles of Association and applicable law, including the Companies Act 2013. We may retain all future earnings, if any, for use in the operations and expansion of the business. As a result, we may not declare dividends in the foreseeable future. Any future determination as to the declaration and payment of dividends will be at the discretion of our Board and will depend on factors that our Board deems relevant, including among others, our future earnings, financial condition, cash requirements, business prospects and any other financing arrangements. Accordingly, realization of a gain on the Shareholders’ investments will depend on the appreciation of the price of our Equity Shares. We cannot assure you that our Equity Shares will appreciate in value.

57. Any variation in the utilization of the Net Proceeds as disclosed in this Prospectus shall be subject to certain compliance requirements including prior approval of the shareholders of our Company.

We intend to use the Net Proceeds for the purposes described in “Objects of the Offer” beginning on page 147, among others, towards (i) repayment/ prepayment of outstanding borrowings availed by our Company and/ or Subsidiaries; (ii) capital expenditure; and (iii) funding inorganic growth through unidentified acquisitions and strategic initiatives. We may need to vary the objects of the Offer due to several factors or circumstances including

(i) competitive and dynamic market conditions, (ii) variation in cost structures, (iii) changes in estimates due to cost overruns or delays, (iv) cost of the borrowing to our Company/Subsidiary including applicable interest rates,

(v) any conditions attached to the borrowings restricting our ability to prepay or repay the borrowings and time taken to fulfil, or obtain waivers for fulfilment of such conditions, (vi) receipt of consents for prepayment from the respective lenders, as applicable, (vii) terms and conditions of such consents and waivers, (viii) levy of any prepayment penalties and the quantum thereof, (ix) provisions of any laws, rules and regulations governing such borrowings, and (x) other commercial considerations including, among others, the amount of loan outstanding and the remaining tenor of the loan, which may be beyond our control.

At this stage, we cannot determine with any certainty if we would require the Net Proceeds to meet any other 85expenditure or fund any exigencies arising out of competitive environment, business conditions, economic conditions or other factors beyond our control. In accordance with Sections 13(8) and 27 of the Companies Act 2013, we cannot undertake any variation in the utilization of the Net Proceeds without obtaining shareholders’ approval through a special resolution. In the event of any such circumstances that require us to undertake variation in the disclosed utilization of the Net Proceeds, we may not be able to obtain shareholders’ approval in a timely manner, or at all. Any delay or inability to obtain such shareholders’ approval may adversely affect our business or operations.

Further, our Promoters would be required to provide an exit opportunity to Shareholders who do not agree with our proposal to change the objects of the Offer or vary the terms of such contracts, at a price and in such manner as prescribed by SEBI. Additionally, the requirement on our Promoters to provide an exit opportunity to such dissenting Shareholders may deter our Promoters from agreeing to the variation of the proposed utilization of the Net Proceeds, even if such variation is in the interests of our Company. Further, our Promoters may not have adequate resources at their disposal at all times to enable them to provide an exit opportunity at the price prescribed by SEBI.

In light of these factors, we may not be able to undertake variation of objects of the Offer to use any unutilized proceeds of the Offer, if any, or vary the terms of any contract referred to in this Prospectus, even if such variation is in the interests of our Company. This may restrict our Company’s ability to respond to any change in our business or financial condition by re-deploying the unutilized portion of Net Proceeds, if any, or varying the terms of contract, which may adversely affect our business and results of operations.

Our funding requirements are based on our current business plan, internal management estimates, prevailing market conditions and other commercial and technical factors, including interest rates, exchange rate fluctuations and other charges, and the financing and other agreements entered into by our Company, and have not been appraised by any bank or financial institution or other independent agency. The deployment of the Net Proceeds will be at the discretion of our Board. We may have to reconsider our estimates or business plans due to changes in underlying factors, some of which are beyond our control, such as interest rate fluctuations, changes in input cost, and other financial and operational factors. Accordingly, prospective investors in the Offer will need to rely upon our management’s judgment with respect to the use of proceeds. If we are unable to deploy the Net Proceeds in a timely or an efficient manner, it may affect our business and results of operations.

58. The holders of Equity Shares may be restricted in their ability to exercise pre-emptive rights under Indian law and thereby suffer future dilution of their ownership position.

Under the Companies Act, a company incorporated in India and having share capital must offer its equity shareholders pre-emptive rights to subscribe and pay for a proportionate number of equity shares to maintain their existing ownership percentages prior to issuance of any new equity shares, unless the pre-emptive rights have been waived by the adoption of a special resolution by holders of three-fourths of our Equity Shares voting on such resolution.

However, if the law of the jurisdiction that you are in does not permit the exercise of such pre-emptive rights without our filing an offering document or registration statement with the applicable authority in such jurisdiction, you will be unable to exercise such pre-emptive rights, unless we make such a filing. If we elect not to file a registration statement, the new securities may be issued to a custodian, who may sell the securities for your benefit.

The value such custodian receives on the sale of any such securities and the related transaction costs cannot be predicted. To the extent that you are unable to exercise pre-emptive rights granted in respect of our Equity Shares, your proportional equity interests in our Company would be diluted.

59. Investors may be subject to Indian taxes arising out of capital gains on the sale of our Equity Shares and dividend received and any capital gains arising from sale of equity may be withheld by the Company at applicable rates for payment of taxes directly on behalf of the Investors.

Under current Indian tax laws, unless specifically exempted, capital gains arising from the sale of equity shares of an Indian company are generally taxable in India. Capital gains arising from the sale of the Equity Shares may be partially or completely exempt from taxation in India in cases where such exemption is provided under a treaty between India and the country of which the seller is a resident. Any capital gain realized on the sale of listed equity shares on a recognized stock exchange held for more than 12 months immediately preceding the date of transfer will be subject to long term capital gains tax in India at the specified rates depending on certain factors, such as the quantum of gains, and any available treaty relief, among others. Any capital gain realized on sale of listed equity shares on a recognized stock exchange held for not more than 12 months immediately preceding the date 86of transfer will be subject to short term capital gains tax. Any gain realized on the sale of our Equity Shares other than on a recognized stock exchange (where no STT has been paid), will also be subject to short term capital gains tax or long-term capital gains tax, at such rates as may be applicable under the Income Tax Act. Generally, Indian tax treaties do not limit India’s ability to impose tax on capital gains. As a result, residents of other countries may be liable for tax in India as well as in their own jurisdiction on gains made upon the sale of the Equity Shares.

Investors were advised to consult their own tax advisors to understand their tax liability as per the laws prevailing on the date of disposal of Equity Shares. The Finance Act, 2019 amended the Indian Stamp Act, 1899 with effect from July 1, 2020. It has clarified that, in the absence of a specific provision under an agreement, the liability to pay stamp duty in case of sale of securities through stock exchanges will be on the buyer, while in other cases of transfer for consideration through a depository, the onus will be on the transferor. The stamp duty for transfer of certain securities, other than debentures, on a delivery basis is specified at 0.015% and on a non-delivery basis is specified at 0.003% of the consideration amount. Further, the Finance Act, 2021, which followed, removed the requirement for DDT to be payable in respect of dividends declared, distributed or paid by a domestic company after March 31, 2020, and accordingly, such dividends would not be exempt in the hands of the shareholders, both resident as well as non-resident. We may or may not grant the benefit of a tax treaty (where applicable) to a non- resident shareholder for the purposes of deducting tax at source pursuant to any corporate action including dividends.

Pursuant to the Finance Act, 2024, any gains realized on the sale of listed equity shares, which are held for a period exceeding 12 months will subject to long term capital gains tax in India at the rate of 12.5%. Further, long term capital gains arising from sale of listed equity shares on which STT has been paid on transfer and at the time of acquisition (unless such acquisition was through a notified transaction) will be exempt up to ₹125,000. Similarly, any gain realized on the sale of listed equity shares held for a period of 12 months or less and on which STT has been paid on transfer will be subject to short-term capital gains tax at a rate of 20%. Short-term capital gains from sale of listed equity shares off-market will be taxed at applicable rates. Investors were advised to consult their own tax advisors to understand their tax liability as per the laws prevailing on the date of disposal of Equity Shares.

The above rates shall be increased by applicable surcharges and cess. Any dividends paid by an Indian company will be subject to tax in the hands of the shareholders at applicable rates. Such taxes will be withheld by the Indian company paying dividends. Non-resident shareholders may claim benefit of the applicable tax treaty, subject to satisfaction of certain conditions. Unfavourable changes in or interpretations of existing, or the promulgation of new, laws, rules and regulations including foreign investment and stamp duty laws governing our business and operations could result in us being deemed to be in contravention of such laws and may require us to apply for additional approvals.

No dividend distribution tax is required to be paid in respect of dividends declared, distributed or paid by a domestic company after March 31, 2020 and, accordingly, such dividends would not be exempt in the hands of the Shareholders both for residents as well as non-residents.

60. The determination of the Price Band is based on various factors and assumptions and the Offer Price of the Equity Shares may not be indicative of the market price of the Equity Shares after the Offer.

Furthermore, the current market price of some securities listed pursuant to certain previous issues managed by the BRLMs is below their respective issue prices.

The determination of the Price Band is based on various factors and assumptions, and will be determined by our Company in consultation with the BRLMs. Furthermore, the Offer Price of the Equity Shares will be determined by our Company in consultation with the BRLMs through the Book Building Process. These will be based on numerous factors, including factors as described under “Basis for Offer Price” on page 166 and may not be indicative of the market price for the Equity Shares after the Offer.

The table below provides details of our market capitalization at Offer Price to revenue from operations and EV/EBITDA ratio at Offer Price for the Financial Year 2025:

Particulars Market Capitalization at Offer Price to EV/EBITDA ratio at Offer Price Revenue from Operations* Financial Year 2025 8.99 83.56 In addition to the above, the current market price of securities listed pursuant to certain previous initial public offerings managed by the BRLMs is below their respective issue price. For further details, see “Other Regulatory and Statutory Disclosures – Price information of past issues handled by the BRLMs” on page 602. The factors that could affect the market price of the Equity Shares include, among others, broad market trends, financial performance and results of our Company post-listing, and other factors beyond our control.

8761. QIBs and NIBs were not permitted to withdraw or lower their Bids (in terms of quantity of Equity Shares or the Bid Amount) at any stage after submitting a Bid, and Retail Individual Bidders were not permitted to withdraw their Bids after the Bid/Offer Closing Date.

Pursuant to the SEBI ICDR Regulations, QIBs and NIBs are required to pay the Bid Amount on submission of the Bid and were not permitted to withdraw or lower their Bids (in terms of quantity of Equity Shares or the Bid Amount) at any stage after submitting a Bid. Retail Individual Bidders could revise or withdraw their Bids at any time during the Bid/Offer Period and until the Bid/Offer Closing Date, but not thereafter. While our Company is required to complete all necessary formalities for listing and commencement of trading of our Equity Shares on all Stock Exchanges where such Equity Shares are proposed to be listed, including Allotment pursuant to the Offer, within such period as may be prescribed under applicable law, events affecting the Bidders’ decision to invest in our Equity Shares, including adverse changes in international or national monetary policy, financial, political or economic conditions, our business, results of operations, financial condition and cash flows may arise between the date of submission of the Bid and Allotment. Our Company may complete the Allotment of our Equity Shares even if such events occur, and such events limit the Bidders’ ability to sell our Equity Shares Allotted pursuant to the Offer or cause the trading price of our Equity Shares to decline on listing. QIBs and NIBs will therefore not be able to withdraw or lower their bids following adverse developments in international or national monetary policy, financial, political or economic conditions, our business, results of operations, financial condition, cash flows or otherwise, between the dates of submission of their Bids and Allotment.

62. Majority of the Directors do not have prior experience of holding a directorship in a company listed on the Stock Exchanges which may subject us to adverse regulatory actions if we are not able to comply with applicable laws, resulting in an impact on the price of our Equity Shares.

Except for Anup Wadhawan and Vidya Sarathy, our Directors do not have prior experience of being on the board of a company listed on the Stock Exchanges. While such Directors are qualified professionals with substantial experience in their respective domains, due to reasons of them not having any experience of being directors in a listed entity, they have historically not been subject to the compliance requirements and scrutiny of the regulators associated with a listed company. Upon listing of the Equity Shares, our Company will be subject to the applicable regulatory requirements, including the regulations prescribed under SEBI Listing Regulations and the Companies Act. We may get limited guidance from them and accordingly, may fail to satisfy our obligations and/or maintain and improve the effectiveness of our disclosure controls, procedures and internal control as required for a listed entity under applicable laws. Any non-compliance with such regulatory framework, whether due to lack of such experience or otherwise, could subject us to adverse regulatory actions, and have an impact on the price of our Equity Shares.

63. Rights of shareholders of companies under Indian law may be different compared to the laws of other jurisdictions and investors may face challenges in asserting their rights as a shareholder under Indian law.

Our Articles of Association, composition of our Board, Indian laws governing our corporate affairs, the validity of corporate procedures, directors’ fiduciary duties, responsibilities and liabilities, and shareholders’ rights may differ from those that would apply to a company in another jurisdiction. Shareholders’ rights under Indian law may not be as extensive and widespread as shareholders’ rights under the laws of other countries or jurisdictions.

Investors may face challenges in asserting their rights as a shareholder in an Indian company rather than as a shareholder of an entity in another jurisdiction.

64. Any future issuance of Equity Shares or convertible securities or other equity linked securities by us may dilute your shareholding and sales of the Equity Shares by our major shareholders may adversely affect the trading price of the Equity Shares.

We may be required to finance our growth through future equity offerings. Any future equity issuances by us, including a primary offering or through exercise of employee stock options or issuance of convertible securities or securities linked to Equity Shares by us, may lead to the dilution of investors’ shareholdings in us. Any disposal of Equity Shares by our major shareholders or any issuance of Equity Shares or the perception that such issuance or sales may occur, including to comply with the minimum public shareholding norms applicable to listed companies in India may adversely affect the trading price of the Equity Shares, which may lead to other adverse consequences including difficulty in raising capital through offering of the Equity Shares or incurring additional debt. There can be no assurance that we will not issue further Equity Shares or that the shareholders will not dispose of the Equity Shares. Further, our Promoters or other major shareholders may undertake sales of the Equity Shares held by them post-listing. Any future issuances could also dilute the value of your investment in the Equity 88Shares. In addition, any perception by investors that such issuances or sales might occur may also affect the market price of the Equity Shares. We cannot assure you that we will not issue additional Equity Shares, convertible securities or securities linked to Equity Shares or that our Shareholders will not dispose of, pledge or encumber their Equity Shares in the future.

EXTERNAL RISK FACTORS

65. Political, economic or other factors that are beyond our control may have an adverse effect on our business, results of operations, financial condition and cash flows.

The Indian economy and capital markets are influenced by economic, political and market conditions in India and globally. We are incorporated in and partially manufacture in India and, as a result, are dependent on prevailing economic conditions in India. Our results of operations are significantly affected by factors influencing the Indian economy. Factors that may adversely affect the Indian economy, and hence our results of operations, may include:

• epidemics, pandemics or any other public health concerns in India or in countries in the region or globally, including in India’s various neighbouring countries, such as the highly pathogenic H7N9, H5N1 and H1N1 strains of influenza in birds and swine and more recently, the COVID-19 pandemic;

• the macroeconomic climate, including any increase in Indian interest rates or inflation; • any exchange rate fluctuations, the imposition of currency controls and restrictions on the right to convert or repatriate currency or export assets;

• any scarcity of credit or other financing in India, resulting in an adverse effect on economic conditions in India and scarcity of financing for our expansions; • volatility in, and actual or perceived trends in trading activity on, India’s principal stock exchanges;

• changes in India’s tax, trade, deregulation, fiscal or monetary policies; • political instability, terrorism or military conflict in India or in countries in the region or globally, including in India’s various neighbouring countries;

• occurrence of natural or man-made disasters (such as hurricanes, typhoons, floods, earthquakes, tsunamis and fires) which may cause us to suspend our operations; • acts of war, civil unrest, local agitation, acts of violence, terrorist attacks, regional conflicts or situations of war may adversely affect the Indian markets as well as result in a loss of business confidence in Indian companies. For instance, any deterioration in relations between India and its neighbouring countries, including Pakistan, following the recent attack in Pahalgam, Jammu and Kashmir in April 2025, may result in escalations in the acts of war and violence, which in turn may lead to investor concern about stability in the region, which may adversely affect the price of our Equity Shares;

• decline in India’s foreign exchange reserves which may affect liquidity in the Indian economy; • any downgrading of India’s debt rating by a domestic or international rating agency; • international business practices that may conflict with other customs or legal requirements to which we are subject, including anti-bribery and anti-corruption laws;

• protectionist and other adverse public policies, including local content requirements, import/export tariffs, increased regulations or capital investment requirements; • imposition of duties and other trade barriers and retaliatory countermeasures implemented by the U.S.

and other governments; and • being subject to the jurisdiction of foreign courts, including uncertainty of judicial processes and difficulty enforcing contractual agreements or judgments in foreign legal systems or incurring additional costs to do so.

While our results of operations may not necessarily track India’s economic growth figures, the Indian economy’s 89performance nonetheless affects the environment in which we operate. Any slowdown or perceived slowdown in the Indian economy, or in specific sectors of the Indian economy, could adversely affect our business, results of operations, financial condition and cash flows, and the price of the Equity Shares.

66. Changing laws, rules and regulations and legal uncertainties, including adverse application of corporate and tax laws, may adversely affect our business, results of operations, financial condition, cash flows and prospects.

The regulatory and policy environment in which we operate is evolving and subject to change. Such changes, including the instances mentioned below, may adversely affect our business, results of operations, financial condition, cash flows and prospects, to the extent that we are unable to suitably respond to and comply with any such changes in applicable law and policy.

For instance, the Digital Personal Data Protection Act, 2023 (“DPDP Act”) which has received the assent of the President on August 11, 2023, provides for personal data protection and privacy of individuals, regulates cross border data transfer, and provides for the processing of digital personal data in a manner that recognises both the rights of individuals to protect their personal data and the need to process personal data for lawful purposes and matters incidental thereto. It also provides for the establishment of a Data Protection Board of India for taking remedial actions and imposing penalties for breach of the provisions of the DPDP Act. It imposes restrictions and obligations on data fiduciaries, resulting from dealing with personal data and further, provides for levy of penalties for breach of obligations prescribed under the DPDP Act. The enactment of the DPDP Act introduces stricter data protection norms for companies in India, which may result in additional costs incurred to ensure compliance.

Additionally, the GoI has published the Draft Digital Personal Data Protection Rules, 2025 which aim to provide the operational framework for implementing India’s new general personal data protection regime.

Further, the Government of India introduced new laws relating to social security, occupational safety, industrial relations and wages namely, the Code on Social Security, 2020 (“Social Security Code”), the Occupational Safety, Health and Working Conditions Code, 2020, the Industrial Relations Code, 2020 and the Code on Wages, 2019, which consolidate, subsume and replace numerous existing central labour legislations and have been implemented with effect from November 21, 2025 (collectively, the “Labour Codes”). As an immediate consequence, the coming into force of these codes could increase the financial burden on our Company, which may adversely affect our profitability. For instance, under the Social Security Code, a new concept of deemed remuneration has been introduced, such that where an employee receives more than half (or such other percentage as may be notified by the Central Government) of their total remuneration in the form of allowances and other amounts that are not included within the definition of wages under the Social Security Code, the excess amount received shall be deemed as remuneration and accordingly be added to wages for the purposes of the Social Security Code and the compulsory contribution to be made towards the employees’ provident fund.

In addition, the Government of India has introduced Bharatiya Nyaya (Second) Sanhita, 2023, Bharatiya Nyaya Sakshya Sanhita, 2023 and Bhartiya Sakshya Sanhita, 2023, which have replaced the Indian Penal Code, 1860, Code of Criminal Procedure, 1973 and the Indian Evidence Act, 1872, respectively.

The Government of India has recently announced the Union Budget for the Financial Year 2026 (“Budget”).

Pursuant to the Budget, the Finance Bill, 2025, among others, proposes to amend the capital gains tax rates and amounts mentioned above, with effect from the date of announcement of the Budget. The Finance Bill, 2025 was enacted into law as the Finance Act, 2025, after having received the assent of the President of India on March 29,

2025.

Unfavorable changes in or interpretations of existing, or the promulgation of new laws, rules and regulations including foreign investment and stamp duty laws governing our business and operations could result in us being deemed to be in contravention of such laws and may require us to apply for additional approvals. We may incur increased costs and other burdens relating to compliance with new requirements, which may also require significant management time and other resources, and any failure to comply may adversely affect our business, results of operations, financial condition, cash flows and prospects. Uncertainty in the application, interpretation or implementation of any amendment to, or change in, governing law, regulation or policy, including by reason of an absence, or a limited body, of administrative or judicial precedent may be time consuming as well as costly for us to resolve and may affect the viability of our current business or restrict our ability to grow our businesses in the future.

9067. Any downgrading of India’s debt rating by an international rating agency could have a negative effect on our business and the trading price of the Equity Shares.

India’s sovereign debt rating could be downgraded due to several factors, including changes in tax or fiscal policy or a decline in India’s foreign exchange reserves, all which are beyond our control. Our borrowing costs and our access to the debt capital markets depend significantly on the sovereign credit ratings of India. Any adverse revisions to India’s credit ratings for domestic and overseas debt by international rating agencies may adversely affect our ability to raise additional external financing, and the interest rates and other commercial terms at which such additional financing is available. This could have an adverse effect on our business and future financial performance, our ability to obtain financing for capital expenditures and the trading price of the Equity Shares.

68. Significant differences exist between the Indian Accounting Standards used to prepare our financial information and other accounting principles, such as the United States Generally Accepted Accounting Principles and the International Financial Reporting Standards, which may affect investors’ assessments of our financial condition.

Our Restated Consolidated Financial Information for the six months period ended September 30, 2025 and 2024, and the Financial Years 2025, 2024 and 2023, included in this Prospectus are presented in conformity with the Indian Accounting Standards (“Ind AS”), and restated in accordance with the requirements of the Section 26 of

Chapter III of the Companies Act 2013, as amended from time to time, Paragraph (A) of Clause 11 (I) of Part A of Schedule VI of the SEBI ICDR Regulations issued by SEBI, and the Guidance Note on Reports on Company Prospectuses (Revised 2019) issued by the ICAI. Ind AS differs from accounting principles with which prospective investors may be familiar, such as Indian Generally Accepted Accounting Principles, United States Generally Accepted Accounting Principles (“U.S. GAAP”) and International Financial Reporting Standards (“IFRS”).

We have not attempted to explain in a qualitative manner the effect of the IFRS or U.S. GAAP on the financial information included in this Prospectus, nor do we provide a reconciliation of our financial information to those of U.S. GAAP or IFRS. Accordingly, the degree to which the Restated Consolidated Financial Information and the financial information included in this Prospectus will provide meaningful information is entirely dependent on the reader’s level of familiarity with Indian accounting practices, Ind AS, the Companies Act and the SEBI ICDR Regulations. Persons not familiar with Indian accounting practices, Ind AS, the Companies Act 2013 and the SEBI ICDR Regulations should limit their reliance on the financial disclosures presented in this Prospectus.

69. Under Indian law, foreign investors are subject to investment restrictions that limit our ability to attract foreign investors, which may adversely affect the trading price of the Equity Shares.

As an Indian company, we are subject to exchange controls that regulate borrowing in foreign currencies, including those specified under FEMA and the rules thereunder. Under foreign exchange regulations currently in force in India, the transfer of shares between non-residents and residents are freely permitted (subject to compliance with sectoral norms and certain other restrictions), if they comply with the pricing guidelines and reporting requirements specified by the RBI. If the transfer of shares, which are sought to be transferred, is not in compliance with such pricing guidelines or reporting requirements or falls under any of the exceptions referred to above, then a prior regulatory approval will be required. Further, unless specifically restricted, foreign investment is freely permitted in all sectors of the Indian economy up to any extent and without any prior approvals, but the foreign investor is required to follow certain prescribed procedures for making such investment. The RBI and the concerned ministries/departments are responsible for granting approval for foreign investment. Additionally, shareholders who seek to convert Rupee proceeds from a sale of shares in India into foreign currency and repatriate that foreign currency from India require a no-objection or a tax clearance certificate from the Indian income tax authorities.

In accordance with the provisions of the Consolidated FDI Policy and FEMA Rules, our Company is a foreign owned and controlled company. As a foreign-owned and controlled company, our Company is subject to certain additional requirements under the Consolidated FDI Policy and other Indian foreign investment laws. In addition, pursuant to the Press Note No. 3 (2020 Series), dated April 17, 2020, issued by the DPIIT, which has been incorporated as the proviso to Rule 6(a) of the FEMA Rules, investments where the beneficial owner of the equity shares is situated in or is a citizen of a country which shares a land border with India, can only be made through the Government approval route, as prescribed in the Consolidated FDI Policy and the FEMA Rules. Any such approval(s) would be subject to the discretion of the regulatory authorities. Restrictions on foreign investment activities and impact on our ability to attract foreign investors may cause uncertainty and delays in our future investment plans and initiatives. We cannot assure investors that any required approval from the RBI or any other government agency can be obtained on any particular terms or conditions or at all. For further information, see 91“Restrictions on Foreign Ownership of Indian Securities” beginning on page 644.

70. Our ability to raise foreign capital may be constrained by Indian law.

As an Indian company, we are subject to exchange controls that regulate borrowing in foreign currencies. Such regulatory restrictions limit our financing sources and could constrain our ability to obtain financings on competitive terms and refinance existing indebtedness. In addition, we cannot assure you that any required regulatory approvals for borrowing in foreign currencies will be granted to us without onerous conditions, or at all. Limitations on foreign debt may have an adverse effect on our business growth, financial condition and results of operations.

71. Investors may have difficulty in enforcing foreign judgments against our Company or our management.

Our Company is a company incorporated under the laws of India. Four of our Directors are citizens of India. A substantial portion of our Company’s assets are located in India. As a result, it may be difficult for investors to effect service of process upon us or such persons in India or to enforce judgments obtained against our Company or such parties outside India.

Recognition and enforcement of foreign judgments is provided for under Section 13 and Section 44A of the Code of Civil Procedure, 1908, as amended (the “Civil Procedure Code”). India is not a party to any international treaty in relation to the recognition or enforcement of foreign judgments. India has reciprocal recognition and enforcement of judgments in civil and commercial matters with a limited number of jurisdictions, including the United Kingdom, Singapore, UAE, and Hong Kong. A judgment from certain specified courts located in a jurisdiction with reciprocity must meet certain requirements of the Civil Procedure Code. The United States has not been notified as a reciprocating territory.

In order to be enforceable, a judgment obtained in a jurisdiction which India recognizes as a reciprocating territory must meet certain requirements of the Civil Procedure Code. Section 13 of the Civil Procedure Code provides that foreign judgments shall be conclusive regarding any matter directly adjudicated on except (i) where the judgment has not been pronounced by a court of competent jurisdiction, (ii) where the judgment has not been given on the merits of the case, (iii) where it appears on the face of the proceedings that the judgment is founded on an incorrect view of international law or refusal to recognize the law of India in cases to which such law is applicable, (iv) where the proceedings in which the judgment was obtained were opposed to natural justice, (v) where the judgment has been obtained by fraud or (vi) where the judgment sustains a claim founded on a breach of any law then in force in India. Under the Civil Procedure Code, a court in India shall, on the production of any document purporting to be a certified copy of a foreign judgment, presume that the judgment was pronounced by a court of competent jurisdiction, unless the contrary appears on record; such presumption may be displaced by proving want of jurisdiction. The Civil Procedure Code only permits the enforcement of monetary decrees, not being in the nature of any amounts payable in respect of taxes, or other charges of a like nature or in respect of a fine or other penalty and does not provide for the enforcement of arbitration awards even if such awards are enforceable as a decree or judgment. A foreign judgment rendered by a superior court (as defined under the Civil Procedure Code) in any jurisdiction outside India which the Government of India has by notification declared to be a reciprocating territory, may be enforced in India by proceedings in execution as if the judgment had been rendered by a competent court in India. Judgments or decrees from jurisdictions which do not have reciprocal recognition with India cannot be enforced by proceedings in execution in India. Therefore, a final judgment for the payment of money rendered by any court in a non-reciprocating territory for civil liability, whether or not predicated solely upon the general laws of the non-reciprocating territory, would not be enforceable in India. Even if an investor obtained a judgment in such a jurisdiction against us, our officers or directors, it may be required to institute a new proceeding in India and obtain a decree from an Indian court.

However, the party in whose favor such final judgment is rendered may bring a new suit in a competent court in India based on a final judgment that has been obtained in the United States or other such jurisdiction within three years of obtaining such final judgment. It is unlikely that an Indian court would award damages on the same basis as a foreign court if an action is brought in India. Moreover, it is unlikely that an Indian court would award damages to the extent awarded in a final judgment rendered outside India if it believes that the amount of damages awarded were excessive or inconsistent with public policy in India. In addition, any person seeking to enforce a foreign judgment in India is required to obtain the prior approval of the RBI to repatriate any amount recovered, and we cannot assure that such approval will be forthcoming within a reasonable period of time, or at all, or that conditions of such approvals would be acceptable. Such amount may also be subject to income tax in accordance with applicable law.

92Consequently, it may not be possible to enforce in an Indian court any judgment obtained in a foreign court, or effect service of process outside of India, against Indian companies, entities, their directors and executive officers and any other parties resident in India. Additionally, there is no assurance that a suit brought in an Indian court in relation to a foreign judgment will be disposed of in a timely manner.

72. Our Equity Shares have never been publicly traded, and, after the Offer, our Equity Shares may experience price and volume fluctuations, and an active trading market for our Equity Shares may not develop.

Prior to the Offer, there has been no public market for our Equity Shares, and an active trading market for our Equity Shares may not develop. Listing and quotation does not guarantee that a market for our Equity Shares will develop, or if developed, the liquidity of such market for our Equity Shares. The Offer Price of our Equity Shares has been determined through a book-building process and will be based on numerous factors, including factors as described under “Basis for Offer Price” on page 166, and may not be indicative of the market price of our Equity Shares at the time of commencement of trading of our Equity Shares or at any time thereafter. Further, the current market price of some of the securities listed pursuant to certain previous issues managed by the BRLMs is below their respective issue prices. For further details, see “Other Regulatory and Statutory Disclosures – Price information of past issues handled by the BRLMs” on page 602. The market price of our Equity Shares may be subject to significant fluctuations in response to, among other factors:

• quarterly variations in our results of operations; • results of operations that vary from the expectations of securities analysts and investors; • results of operations that vary from those of our competitors;

• changes in expectations as to our future financial performance, including financial estimates by securities analysts and investors; • conditions in financial markets, including those outside India; • a change in securities analysts’ recommendations;

• announcements by us or our competitors of new products, significant acquisitions, strategic alliances, joint operations or capital commitments; • announcements by third parties or government entities of significant claims or proceedings against us;

• new laws and government regulations or changes in laws and government regulations applicable to our industry; • additions or departures of Key Managerial Personnel and Senior Management; • general economic and stock market conditions;

• changes in exchange rates; • fluctuations in stick market prices and volume; and • changes in relation to any of the factors listed above could affect the price of our Equity Shares.

In addition, the stock market often experiences price and volume fluctuations that are unrelated or disproportionate to the operating performance of a particular company. These broad market fluctuations and industry factors may materially reduce the market price of Equity Shares, regardless of our performance. Consequently, the price of our Equity Shares may be volatile, and you may be unable to resell your Equity Shares at or above the Offer Price, or at all. A decrease in the market price of our Equity Shares could cause investors to lose some or all of their investment.

9373. Subsequent to the listing of the Equity Shares, we may be subject to pre-emptive surveillance measures, such as the Additional Surveillance Measures and the Graded Surveillance Measures by the Stock Exchanges in order to enhance the integrity of the market and safeguard the interest of investors.

Subsequent to the listing of the Equity Shares, we may be subject to additional surveillance measures (“ASM”) and graded surveillance measures (“GSM”) by the Stock Exchanges. These measures are in place to enhance the integrity of the market and safeguard the interest of investors. The criteria for shortlisting any security trading on the Stock Exchanges for ASM is based on objective criteria, which includes market based parameters such as high low price variation, concentration of customer accounts, close to close price variation, market capitalization, average daily trading volume and its change, and average delivery percentage, among others. Securities are subject to GSM when its price is not commensurate with the financial health and fundamentals of the issuer. Specific parameters for GSM include net worth, net fixed assets, price to earnings ratio, market capitalization and price to book value, among others. Factors within and beyond our control may lead to our securities being subject to GSM or ASM. In the event our Equity Shares are subject to such surveillance measures implemented by any of the Stock Exchanges, we may be subject to certain additional restrictions in connection with trading of our Equity Shares such as limiting trading frequency (for example, trading either allowed once in a week or a month) or freezing of price on upper side of trading which may have an adverse effect on the market price of our Equity Shares or may in general cause disruptions in the development of an active trading market for our Equity Shares.

94SECTION III – INTRODUCTION THE OFFER

The following table summarizes details of the Offer:

Offer(1)(6) 74,355,351* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 9,218.12* million

Of which:

Fresh Issue(1) 54,047,958* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00* million Offer for Sale(1)(2) 20,307,393* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 2,518.12* million

which includes:

Employee Reservation Portion(7) 176,991* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 20.00 million Net Offer 74,178,360* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 9,198.12* million

The Offer consists of:

A. QIB Portion(3) 55,633,772* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,898.59* million

Of which:

Anchor Investor Portion(4) 33,380,262* Equity Shares bearing face value of ₹ 10 each Net QIB Portion (assuming Anchor Investor Portion 22,253,510* Equity Shares bearing face value of ₹ 10 each is fully subscribed)

Of which:

Available for allocation to Mutual Funds only (5% of 1,112,676* Equity Shares bearing face value of ₹ 10 each the Net QIB Portion) Balance of Net QIB Portion for all QIBs including 21,140,834* Equity Shares bearing face value of ₹ 10 each Mutual Funds B. Non-Institutional Portion(5) 11,126,753* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 1,379.72* million

Of which:

One-third of the Non-Institutional Portion available 3,708,917* Equity Shares bearing face value of ₹ 10 each for allocation to Bidders with an application size of more than ₹ 0.20 million and up to ₹ 1.00 million Two-third of the Non-Institutional Portion available 7,417,836* Equity Shares bearing face value of ₹ 10 each for allocation to Bidders with an application size of more than ₹ 1.00 million C. Retail Portion 7,417,835* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 919.81* million Pre-Offer and post-Offer Equity Shares Equity Shares outstanding prior to the Offer (as on the 616,617,677 Equity Shares bearing face value of ₹ 10 each date of this Prospectus) Equity Shares outstanding after the Offer 670,665,635* Equity Shares bearing face value of ₹ 10 each Use of proceeds of the Offer See “Objects of the Offer” on page 147 for details regarding the use of proceeds from the Fresh Issue. Our Company will not receive any proceeds from the Offer for Sale.

* Subject to finalisation of Basis of Allotment

(1) The Offer has been authorised by our Board pursuant to its resolution dated May 10, 2025, and the Fresh Issue has been authorized by our Shareholders pursuant to a special resolution dated May 13, 2025. For details of the consent of the Selling Shareholders in relation to the Offer for Sale, see “The Offer” and “Other Regulatory and Statutory Disclosures” beginning on pages 95 and 591, respectively.

(2) Each of the Selling Shareholders, severally and not jointly, have confirmed that their respective portion of the Offered Shares have been held for a period of at least one year preceding the date of filing of the UDRHP – I with SEBI and are eligible for being offered for sale in the Offer, in terms of Regulations 8 and 8A of the SEBI ICDR Regulations. For further details, see “Capital Structure” on page 115.

The Selling Shareholders have confirmed and authorized their participation in the Offer for Sale, as stated below:

Date of corporate action/ Name of the Selling Number of Offered Shares/ Amount (in ₹ Date of consent board resolution/ Shareholder million) letter authorization letter Promoter Selling Shareholders 95Date of corporate action/ Name of the Selling Number of Offered Shares/ Amount (in ₹ Date of consent board resolution/ Shareholder million) letter authorization letter Aequs Manufacturing 100,000 Equity Shares bearing face value of ₹ May 30, 2025 May 9, 2025 Investments Private Limited 10 each aggregating to ₹ 12.40 million Melligeri Private Family 1,323,500 Equity Shares bearing face value of ₹ May 30, 2025 May 20, 2025 Foundation 10 each aggregating to ₹ 164.11 million Investor Selling Shareholders Amicus Capital Private Equity I 7,481,908 Equity Shares bearing face value of ₹ November 13, 2025 May 13, 2025 LLP 10 each aggregating to ₹ 927.76 million Amicus Capital Partners India 754,450 Equity Shares bearing face value of ₹ November 13, 2025 May 13, 2025 Fund I 10 each aggregating to ₹ 93.55 million Amicus Capital Partners India 8,879,915 Equity Shares bearing face value of ₹ November 13, 2025 May 13, 2025 Fund II 10 each aggregating to ₹ 1,101.11 million Girija Dempo Family Private 435,656 Equity Shares bearing face value of ₹ November 13, 2025 May 12, 2025 Trust 10 each aggregating to ₹ 54.02 million Vasundhara Dempo Family 435,656 Equity Shares bearing face value of ₹ November 13, 2025 May 12, 2025 Private Trust 10 each aggregating to ₹ 54.02 million Individual Selling Shareholders 25,000 Equity Shares bearing face value of ₹ 10 Raman Subramanian May 30, 2025 - each aggregating to ₹ 3.10 million 871,308 Equity Shares bearing face value of ₹ Ravindra Mariwala November 13, 2025 - 10 each aggregating to ₹ 108.04 million

(3) If at least 75% of the Net Offer cannot be Allotted to QIBs, the entire application money will be refunded forthwith. In the event aggregate demand in the QIB Portion has been met, subject to valid Bids having been received at or above the Offer Price, under-subscription, if any, in any category, except the QIB Portion, was allowed to be met with spill-over from other categories or a combination of categories at the discretion of our Company in consultation with the BRLMs and the Designated Stock Exchange, in accordance with applicable laws. Under-subscription, if any, in the Net QIB Portion was not allowed to be met with spill-over from other categories or a combination of categories.

(4) Our Company, in consultation with the BRLMs, allocated 60% of the QIB Portion to Anchor Investors on a discretionary basis in accordance with the SEBI ICDR Regulations. One-third of the Anchor Investor Portion was made available for allocation to domestic Mutual Funds only, subject to valid Bids having been received from domestic Mutual Funds at or above the Anchor Investor Allocation Price. 5% of the Net QIB Portion was made available for allocation on a proportionate basis to Mutual Funds only, and the remainder of the Net QIB Portion was made available for allocation on a proportionate basis to all QIB Bidders (other than Anchor Investors), including Mutual Funds, subject to valid Bid having been received at or above the Offer Price. For further details, see “Offer Procedure” and “Offer Structure” on pages 623 and 616, respectively.

(5) Not more than 15% of the Net Offer was made available for allocation to Non-Institutional Investors of which one-third of the Non- Institutional Portion was made available for allocation to Bidders with an application size of more than ₹ 0.20 million and up to ₹ 1.00 million and two-thirds of the Non-Institutional Portion was made available for allocation to Bidders with an application size of more than ₹ 1.00 million and under-subscription in either of these two sub-categories of Non-Institutional Portion was allocated to Bidders in the other sub-category of Non-Institutional Portion. The allocation to each Non-Institutional Investor was not less than the minimum application size, subject to availability of Equity Shares in the Non-Institutional Portion and the remaining available Equity Shares, was allocated on a proportionate basis in accordance with the conditions specified in this regard in Schedule XIII of the SEBI ICDR Regulations.

(6) Our Company, in consultation with the BRLMs, undertook a Pre-IPO Placement, as permitted under applicable law, aggregating to ₹ 1,440.00 million. The Pre-IPO Placement, was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹

123.97 per Equity Share bearing face value of ₹ 10 each, decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue, as disclosed in the UDRHP – I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue, as disclosed in the UDRHP - I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.

(7) The Employee Reservation portion did not exceed 5% of our post-Offer equity share capital. In the event of an under-subscription in the Employee Reservation Portion, the unsubscribed portion was Allotted on a proportionate basis to Eligible Employees Bidding in the Employee Reservation Portion, for a value in excess of ₹ 0.20 million (net of Employee Discount), subject to the total Allotment to an Eligible Employee not exceeding ₹ 0.50 million (net of Employee Discount). The unsubscribed portion if any, in the Employee Reservation Portion (after allocation up to ₹ 0.50 million), was added to the Net Offer. Further, an Eligible Employee Bidding in the Employee Reservation Portion could also Bid in the Net Offer and such Bids were not treated as multiple Bids subject to applicable limits. Our Company, in consultation with the BRLMs, offered a discount of 8.87% to the Offer Price (equivalent of ₹ 11.00 per Equity Share) to Eligible Employees Bidding in the Employee Reservation Portion, subject to necessary approvals as may be required, and which were announced two Working Days prior to the Bid / Offer Opening Date.

Allocation to all categories of Bidders, other than Anchor Investors, Retail Individual Investors and Non- Institutional Investors was made on a proportionate basis, subject to valid Bids having been received at or above the Offer Price, as applicable. The allocation to each Retail Individual Investor and Non-Institutional Investor was not less than the minimum Bid Lot, subject to availability of Equity Shares in the Retail Portion and the Non- Institutional Portion and the remaining available Equity Shares were allocated on a proportionate basis. For more 96information, see “Offer Structure”, “Offer Procedure” and “Terms of the Offer” on pages 616, 623 and 609, respectively.

97SUMMARY FINANCIAL INFORMATION The summary financial information presented below have been derived from our Restated Consolidated Financial Information and should be read in conjunction with “Restated Consolidated Financial Information” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” on pages 383 and 539, respectively.

[The remainder of this page has been intentionally left blank] 98Summary of restated consolidated statement of assets and liabilities (in ₹ million) As at As at As at As at As at Particulars September 30, September March 31, March 31, March 31, 2025 30, 2024 2025 2024 2023 ASSETS Non-current assets Property, plant and equipment 4,024.29 1,714.24 1,668.82 1,749.45 1,815.31 Right-of-use assets 3,126.69 3,911.91 3,349.25 4,112.40 4,168.90 Capital work-in-progress 3,461.44 2,722.14 3,950.90 1,753.85 16.00 Investment property - - - - 63.94 Goodwill 172.56 172.56 172.56 655.21 655.21 Other intangible assets 53.02 70.22 61.23 85.43 134.00 Intangible assets under development - - - - 4.13 Investments accounted for using equity method 813.07 716.66 768.12 621.61 574.90 Financial assets Investments 0.94 0.86 0.85 0.83 0.81 Loans - - - - - Other financial assets 780.09 435.64 706.24 394.52 337.43 Contract Assets 51.02 - - - - Deferred tax assets (net) 331.07 313.69 331.70 324.47 309.00 Current tax assets 6.67 32.02 19.04 14.26 27.33 Other non-current assets 228.99 174.05 133.08 159.02 78.53 Total non-current assets 13,049.85 10,263.99 11,161.79 9,871.05 8,185.49 Current assets Inventories 4,591.24 4,187.14 4,082.69 3,541.17 2,984.87 Financial assets Investments - 371.28 - 297.15 - Trade receivables 1,812.56 1,621.85 1,566.04 1,368.85 1,071.28 Cash and cash equivalents 571.93 657.17 609.43 792.74 512.87 Bank balances other than above 226.31 754.75 188.48 1,727.01 60.81 Other financial assets 124.32 11.01 128.72 15.15 33.19 Contract assets 26.65 34.26 52.89 24.81 0.58 Other current assets 940.46 729.67 808.22 588.20 317.75 Assets classified as held for sale 0.19 3.88 0.14 3.70 50.07 Total current assets 8,293.66 8,371.01 7,436.61 8,358.78 5,031.42 Total assets 21,343.51 18,635.00 18,598.40 18,229.83 13,216.91 EQUITY AND LIABILITIES EQUITY Equity share capital 6,050.02 4,247.59 5,818.29 4,247.59 4,247.58 Instruments entirely equity in nature - 4,071.16 - 4,071.16 - Other equity 2,004.27 (908.27) 1,350.90 (153.14) (1,461.50) Equity attributable to owners of Aequs Limited 8,054.29 7,410.48 7,169.19 8,165.61 2,786.08 (formerly known as Aequs Private Limited) Non-controlling interests (9.41) (9.41) (9.41) (9.41) (113.56) Total equity 8,044.88 7,401.07 7,159.78 8,156.20 2,672.52 LIABILITIES Non-current liabilities Financial liabilities Borrowings 2,073.92 1,214.18 1,424.39 855.08 1,253.17 Lease liabilities 2,694.70 3,397.76 2,785.57 3,506.82 3,377.90 Other financial liabilities 61.08 5.13 64.75 6.38 6.57 Provision for employee benefits 170.75 129.74 161.79 126.58 110.17 Other non-current liabilities 42.01 - 45.00 - 29.45 Contract liabilities 176.38 194.95 192.92 - - Total non-current liabilities 5,218.84 4,941.76 4,674.42 4,494.86 4,777.26 Current liabilities Financial liabilities Borrowings 3,261.19 2,633.68 2,946.23 2,063.73 2,208.22 Lease liabilities 658.67 566.33 694.28 563.68 519.96 Trade payables a. Total outstanding dues of micro enterprises and 65.01 32.19 65.70 9.99 1.63 small enterprises; and b. Total outstanding dues of creditors other than 2,866.50 2,294.81 2,243.17 2,015.20 2,255.99 micro enterprises and small enterprises Other financial liabilities 541.89 369.98 400.25 496.00 264.50 Provision for employee benefits 80.71 65.63 65.57 54.83 45.20 99As at As at As at As at As at Particulars September 30, September March 31, March 31, March 31, 2025 30, 2024 2025 2024 2023 Other current liabilities 168.45 202.33 152.83 191.88 295.49 Current tax liabilities (net) 71.63 17.19 35.16 60.92 - Contract liabilities 365.74 109.54 160.72 122.06 165.41 Liabilities directly associated with assets - 0.49 0.29 0.48 10.73 classified as held for sale Total current liabilities 8,079.79 6,292.17 6,764.20 5,578.77 5,767.13 Total liabilities 13,298.63 11,233.93 11,438.62 10,073.63 10,544.39 Total equity and liabilities 21,343.51 18,635.00 18,598.40 18,229.83 13,216.91 100Summary of restated consolidated statement of profit and loss (in ₹ million, expect share data, unless otherwise specified) Six months Six months Fiscal period period 2025 2024 2023 Particulars ended ended September September 30, 2025 30, 2024 Continuing operations Revenue from operations 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 Other income 283.86 165.33 346.07 232.30 284.07 Total income (A) 5,655.45 4,755.06 9,592.13 9,883.04 8,405.39 Expenses Cost of materials consumed 2,328.94 2,285.19 4,082.60 4,390.72 4,168.95 Purchases of stock-in-trade - - - - 20.70 Changes in inventories of finished goods and work-in- (154.35) (314.98) (160.60) (224.67) (349.24) progress Employee benefits expense 927.57 762.12 1,587.41 1,434.08 1,446.39 Impairment losses/(reversal) on financial assets 2.26 (9.00) 4.16 14.63 8.54 Other expenses 1,709.97 1,453.51 2,998.87 2,813.18 2,479.49 Total expenses (B) 4,814.39 4,176.84 8,512.44 8,427.94 7,774.83 Earnings from continuing operations before finance cost, 841.06 578.22 1,079.69 1,455.10 630.56 depreciation and amortisation, share of profit/(loss) of associate and joint ventures, exceptional items and tax (A- B) Finance costs 357.51 278.59 589.01 638.06 646.07 Depreciation and amortisation expense 571.55 529.20 1,034.06 1,076.85 995.16 Loss from continuing operations before exceptional items, (88.00) (229.57) (543.38) (259.81) (1,010.67) share of profit/(loss) of associate and joint ventures, and tax Share of net profit/(loss) of associate and joint ventures 33.83 53.16 85.24 51.52 (8.74) accounted for using the equity method, net of tax Exceptional items gain / (loss) - (482.65) (482.65) 186.48 (7.36) Loss before tax from continuing operations (54.17) (659.06) (940.79) (21.81) (1,026.77) Income Tax expense - Current tax 109.91 67.58 148.88 115.13 12.02 - Deferred tax 2.76 (10.53) (65.48) (15.47) 48.47 Total tax expense 112.67 57.05 83.40 99.66 60.49 Loss from continuing operations (166.84) (716.11) (1,024.19) (121.47) (1,087.26) Discontinued operations

(Loss) / profit from discontinued operations before tax (2.93) (0.89) 0.73 (20.97) (7.69)

(Loss) / profit from discontinued operations after tax (2.93) (0.89) 0.73 (20.97) (7.69) Loss for the period/ year (169.77) (717.00) (1,023.46) (142.44) (1,094.95) Other comprehensive income / (loss) Items that will be reclassified to profit or loss - Exchange differences on translating financial statements of (262.73) (63.99) (49.37) (42.10) (66.38) foreign operations Items that will not be reclassified to profit or loss - Remeasurements of post-employment benefit obligations 0.04 0.03 (3.86) 3.08 12.73 - Share of other comprehensive income of joint ventures and - - - - (0.55) associate accounted for using equity method - Income tax relating to these items - - - - (2.16) Other comprehensive income/ (loss) for the period/ year, (262.69) (63.96) (53.23) (39.02) (56.36) net of tax Total comprehensive loss for the period/ year, net of tax (432.46) (780.96) (1,076.69) (181.46) (1,151.31) Profit / (loss) attributable to:

Owners of Aequs Limited (formerly known as Aequs Private (169.77) (717.00) (1,023.46) (108.38) (988.26) Limited) Non con trolling interests - 0.00 - (34.06) (106.69) (169.77) (717.00) (1,023.46) (142.44) (1,094.95) Other comprehensive income/ (loss) attributable to:

Owners of Aequs Limited (formerly known as Aequs Private (262.69) (63.96) (53.23) (39.01) (51.97) Limited) Non con trolling interests - - - (0.01) (4.39) (262.69) (63.96) (53.23) (39.02) (56.36) Total comprehensive (loss)/ income attributable to:

Owners of Aequs Limited (formerly known as Aequs Private (432.46) (780.96) (1,076.69) (147.39) (1,040.23) Limited) Non c ontrolling interests - 0.00 0.00 (34.07) (111.08) (432.46) (780.96) (1,076.69) (181.46) (1,151.31) 101Six months Six months Fiscal period period 2025 2024 2023 Particulars ended ended September September 30, 2025 30, 2024 Total comprehensive (loss) / income attributable to owners of Aequs Limited (formerly known as Aequs Private Limited) arising from:

Continuing operations (429.53) (780.07) (1,077.42) (160.49) (1,143.62) Discont inued operations (2.93) (0.89) 0.73 (20.97) (7.69) (432.46) (780.96) (1,076.69) (181.46) (1,151.31) Earnings per equity share for profit from continuing operation (0.29) (1.26) (1.80) (0.16) (2.42) attributable to owners of Aequs Limited (formerly known as Aequs Private Limited) (Basic and Diluted - in INR) (Nominal

value per share: ₹ 10) Earnings per equity share for profit from discontinued (0.01) (0.00) 0.00 (0.04) (0.02) operation attributable to owners of Aequs Limited (formerly known as Aequs Private Limited) (Basic and Diluted - in INR) (Nominal value per share: ₹ 10) Earnings per equity share for profit from discontinued & (0.30) (1.26) (1.80) (0.20) (2.44) continuing operation attributable to owners of Aequs Limited (formerly known as Aequs Private Limited) (Basic and Diluted - in INR.) (Nominal value per share: ₹ 10) 102Summary of restated consolidated statement of cash flows (in ₹ million) Six months Six months Fiscal period ended period ended 2025 2024 2023 Particulars September September 30, 2025 30, 2024 Cash flow from operating activities Loss before tax from continuing operations (54.17) (659.06) (940.79) (21.81) (1,026.7

7) Profit / (Loss) before tax from discontinuing operations (2.93) (0.89) 0.73 (20.97) (7.69) Loss before tax (57.10) (659.95) (940.06) (42.78) (1,034.4 6 )

Adjustments for:

Depreciation and amortisation expense 571.55 529.20 1,034.06 1,076.85 995.16 Equity-settled share-based payment transactions 10.25 11.42 8.77 20.68 24.05 Net loss on disposal of property, plant and equipment/ 5.94 - (0.42) (186.38) 4.76 investment property Interest income from financial asset at amortised cost (49.18) (50.07) (89.12) (81.91) (12.86) Gain on mutual funds - (17.09) (23.74) (3.58) - Liabilities no longer required written back (8.93) (11.30) (21.07) (29.97) (58.12) Loss allowance on trade receivables 2.26 0.04 4.16 14.63 8.54 Impairment reversal on financial assets - (9.04) - - - Provision for slow moving inventory 92.21 167.28 138.42 - 31.52 Finance cost 351.36 269.11 574.43 638.06 479.26 Finance guarantee income (6.56) (1.95) (9.46) (6.06) (9.61) Unwinding of discount on security deposits (10.06) (10.04) (19.72) (17.27) (19.51) Finance guarantee expense 6.15 9.48 14.58 - 20.03 Unrealised exchange (gain) or loss (182.49) 54.81 (20.38) (25.79) 94.83 Share of (gain)/loss from associate and joint ventures (33.83) (53.16) (85.24) (51.52) 8.74 Impairment loss on goodwill - 482.65 482.65 - - Impairment loss on loans and receivable from related - - - - 7.36 parties Dividend Income - - - - (12.25) Provision for doubtful advances and advance written off 8.17 1.26 8.07 - - Government grant related to property, plant and equipment (5.34) - (32.10) - - Gain on derecognition of lease - (19.27) (18.59) - (18.84) R ealized loss on lease payments 37.45 - 29.00 - -

731.85 693.38 1,034 .24 1,30 4.96 508 .60 Working capital adjustments - (Increase) in trade receivables (180.79) (232.79) (319.48) (309.23) (5.92) - (Increase) in inventories (553.66) (803.03) (734.26) (556.05) (870.02) - Decrease/(Increase) in other financial assets (current 97.49 (1.41) (28.77) (23.03) (65.38) and non-current) - (Increase) in other assets (current and non-current) (148.39) (125.87) (267.40) (211.09) (41.34) - (Increase)/decrease in contract assets (23.54) (9.19) (27.91) (19.81) 8.37 - Increase/(decrease) in trade payables 501.82 327.09 381.02 (193.95) 491.29 - Increase in provision for employee benefits 18.67 12.48 47.71 28.79 16.33 - (Decrease) in other liabilities (current and non-current) (8.57) (0.36) (58.48) (130.44) (79.49) - (Decrease)/increase in other financial liabilities (75.82) (52.49) 91.80 2.37 21.96 (current and non-current) - Increase/(Decrease) in contract liabilities 182.90 182.67 264.04 (42.93) 123.04 Cash generated/(used in) from operations 541.96 (9.52) 382.51 (150.41) 107.44 Income taxes paid (net of refunds) (62.94) (107.75) (121.10) (40.67) (9.33) Net cash generated/(used in) from operating activities 479.02 (117.27) 261.41 (191.08) 98.11

(A) Cash flow from investing activities Acquisition of property, plant and equipment/ Payment for (1,999.37) (1,221.84) (2,651.62) (1,818.07) (856.10) property, plant and equipment Proceeds from sale of property, plant and equipment/ 6.62 0.73 - 262.20 - investment property Assets classified as held for sale - - 3.36 - (45.42) Loans given to related parties - - 15.38 - (0.75) Repayment of loans given to related parties - - - - 60.30 Investments in associate and joint ventures - (42.00) (42.31) - (71.51) Investments in mutual funds - (150.84) (172.17) (293.57) - Proceeds from sale in mutual funds - 93.77 493.04 - - Investment in bank deposits (117.65) (80.01) (3,204.99) (1,662.99) - Proceeds from maturity of bank deposits 17.54 1,052.27 4,701.97 - - Interest received 40.56 50.06 72.44 78.75 12.73 Government grants received 15.57 - 46.70 - - Dividend received - - - - 12.25 103Six months Six months Fiscal period ended period ended 2025 2024 2023 Particulars September September 30, 2025 30, 2024 Net cash used in investing activities (B) (2,036.73) (297.86) (738 .20) (3,433 .68) (888 .50) Cash flow from financing activities Proceeds from issue of equity shares 1,281.79 - - 0.03 - Proceeds from issue of compulsorily convertible - - - 5,219.34 641.00 preference shares Proceeds from issue of compulsorily convertible - - - - 839.43 debentures Share issue expenses - - - (114.73) (68.36) Proceeds from long term borrowing 1,142.37 588.54 1,107.91 903.53 257.61 Repayment of long term borrowing (239.83) (149.63) (345.06) (797.49) (282.90) Proceeds from related party borrowing - - - 76.08 - Principal payment of lease liabilities (333.03) (271.96) (561.63) (468.41) (362.22) Issue of shares to Aequs Stock Option Plan Trust - - 23.10 - - Exercise of share options 40.97 - - - - Acquisition of non controlling interests - - - (100.00) - Proceeds from /(repayment of) short term borrowing (net) 103.13 468.54 641.82 (155.26) (31.52) Finance costs paid (335.45) (319.41) (612.13) (628.19) (449.30) Net cash from financing activities (C) 1,659.95 316.07 254.01 3,934.90 543.74 Net increase/(decrease) in cash and cash equivalents (A 102.24 (99.06) (222.78) 310.14 (246.65) + B + C) Cash and cash equivalents at the beginning of the period/ 609.43 792.74 792.74 512.87 825.90 year Effects of exchange rate changes on cash and cash (139.74) (36.51) 39.47 (30.27) (66.38) equivalents Cash and cash equivalents at the end of the period/ year 571.93 657.17 609.43 792.74 512.87

Cash and cash equivalents comprise the following:

Balances with banks - Current accounts 278.80 332.37 296.70 290.75 361.76 - Deposits with original maturity of three months or 292.82 324.73 312.70 501.94 151.04 less Cash on hand 0.31 0.07 0.03 0.05 0.07 Cash and cash equivalents at the end of the period/ year 571.93 657.17 609.43 792.74 512.87 104GENERAL INFORMATION Registered Office Aequs Tower, No. 55 Whitefield Main Road Mahadevapura Post Bengaluru 560 048 Karnataka, India Corporate Office Aequs SEZ No. 437/A, Hattargi Village Hukkeri Taluk, Belagavi 591 243 Karnataka, India For details in relation to changes in the registered office address of our Company, see “History and Certain Corporate Matters – Changes in the registered office of our Company” on page 335.

CIN: U80302KA2000PLC026760

Registration Number: 026760 Address of the Registrar of Companies

Our Company is registered with the Registrar of Companies which is located at the following address:

Registrar of Companies, Karnataka at Bengaluru E Wing, 2nd Floor, Kendriya Sadana Koramangala, Bengaluru 560 034 Karnataka, India Board of Directors

The following table sets out details regarding our Board as on the date of this Prospectus:

Name and Designation DIN Address Aravind Shivaputrappa Melligeri 007877355 23 Grand Colonial Drive, The Woodlands, TX 77382-

Designation: Executive Chairman and 2071, USA Chief Executive Officer Rajeev Kaul 01468590 9, Parjat Lane Mango Meadows, Udyambag, Khanapur

Designation: Managing Director Road, Majagaon Belagavi 590 008, Karnataka, India Ajay Aravind Prabhu 00477195 3 Jalan Rumbia, #13-3 The Imperial, Singapore 239 617

Designation: Non-executive Director Eberhard Klaus Richter 07427610 80639 Munchen Winthirstr.6, Germany

Designation: Independent Director Vidya Sarathy 01689378 145, 6th Cross, Vijaya Bank Layout Billekahalli,

Designation: Independent Director Bengaluru 560 076, Karnataka, India Anup Wadhawan 03565167 A-4, Greater Kailash Enclave-II, Savitri Road, New

Designation: Independent Director Delhi 110 048, India For brief profiles and further details in respect of our Directors, see “Our Management” on page 360.

Company Secretary and Compliance Officer Ravi Mallikarjun Hugar Aequs SEZ No. 437/A, Hattargi Village Hukkeri Taluk, Belagavi 591 243 Karnataka, India

Tel: +91 96 3205 8521 E-mail: investor.relations@aequs.com Statutory Auditors to our Company 105B S R & Co. LLP, Chartered Accountants 3rd Floor, Embassy Golf Links Business Park Pebble Beach, ‘B’ Block Off Intermediate Ring Road Bengaluru 560 071 Karnataka, India

Tel: +91 80 4682 3000

Fax: +91 80 4682 3999 E-mail: sthakurta@bsraffiliates.com

Peer review number: 019712

Firm registration number: 101248W/W-100022 Changes in statutory auditors Except as disclosed below, there has been no change in the statutory auditors of our Company during the three

years immediately preceding the date of this Prospectus:

Particulars of statutory auditors Date of the change Reason for change B S R & Co. LLP, Chartered Accountants October 25, 2024 Appointment as Statutory Auditors for 3rd Floor, Embassy Golf Links Business Park an initial term of five years Pebble Beach, ‘B’ Block Off Intermediate Ring Road Bengaluru 560 071, Karnataka, India

Tel: +91 80 4682 3000

Fax: +91 80 4682 3999 E-mail: sthakurta@bsraffiliates.com

Peer review number: 019712

Firm registration number: 101248W/W-100022 B S R & Co. LLP, Chartered Accountants March 28, 2024 Appointment as statutory auditor due to 3rd Floor, Embassy Golf Links Business Park casual vacancy caused by the resignation Pebble Beach, ‘B’ Block of the previous statutory auditor Off Intermediate Ring Road Bengaluru 560 071, Karnataka, India

Tel: +91 80 4682 3000

Fax: +91 80 4682 3999 E-mail: sthakurta@bsraffiliates.com

Peer review number: 019712

Firm registration number: 101248W/W-100022 Price Waterhouse Chartered Accountants LLP February 20, 2024 Resignation as statutory auditor due to (Previous Statutory Auditor) commercial reasons 5th Floor, Tower D The Millenia, 1 & 2 Murphy Road Ulsoor, Bengaluru 560 008, Karnataka, India

Tel: +91 80 4079 4190 E-mail: abdul.majeed@pwandaffiliates.com

Peer review number: 015948

Firm registration number: 012754N/N500016 106Book Running Lead Managers JM Financial Limited Kotak Mahindra Capital Company Limited 7th Floor, Cnergy 27 BKC, 1st Floor, Plot No. C – 27 Appasaheb Marathe Marg “G” Block, Bandra Kurla Complex Prabhadevi, Mumbai 400 025 Bandra (East), Mumbai 400 051 Maharashtra, India Maharashtra, India

Tel: + 91 22 6630 3030 Tel: +91 22 4336 0000 E-mail: aequs.ipo@jmfl.com E-mail: aequs.ipo@kotak.com

Website: www.jmfl.com Website: https://investmentbank.kotak.com/ Investor grievance e-mail: grievance.ibd@jmfl.com Investor grievance e-mail:

Contact person: Prachee Dhuri kmccredressal@kotak.com SEBI registration no.: INM000010361 Contact person: Ganesh Rane SEBI registration no.: INM000008704 IIFL Capital Services Limited (formerly known as IIFL Securities Limited) 24th Floor, One Lodha Place Senapati Bapat Marg, Lower Parel (West) Mumbai 400 013 Maharashtra, India

Tel: + 91 22 4646 4728 E-mail: aequs.ipo@iiflcap.com

Website: www.iiflcapital.com Investor grievance e-mail: ig.ib@iiflcap.com

Contact person: Dhruv Bhavsar / Pawan Kumar Jain SEBI registration no.: INM000010940 Statement of inter-se allocation of responsibilities amongst the Book Running Lead Managers

The responsibilities and coordination by the BRLMs for various activities in this Offer are as follows:

S. Activities Responsibility Coordination No.

1. Capital structuring, positioning strategy, due diligence of the Company BRLMs JM Financial including its operations/management/business plans/ legal etc. Drafting and design of the Pre-filed Draft Red Herring Prospectus, the Updated Draft Red Herring Prospectus - I, the updated draft red herring prospectus – II, Red Herring Prospectus, Prospectus, abridged prospectus and application form. The BRLMs shall ensure compliance with stipulated requirements and completion of prescribed formalities with the Stock Exchanges, RoC and SEBI including finalisation of Prospectus and RoC filing.

2. Appointment of intermediaries - Registrar to the Offer and advertising agency BRLMs JM Financial to the Offer including co-ordination for agreements to be entered into with such intermediaries.

3. Drafting and approval of all statutory advertisements and audio-visual BRLMs JM Financial presentation.

4. Drafting and approval of all publicity material other than statutory BRLMs IIFL advertisement as mentioned above including corporate advertising, brochure, media monitoring etc. and filing of media compliance report

5. Appointment of intermediaries - Banker(s) to the Offer, Sponsor Bank, BRLMs Kotak Monitoring Agency, printer and other intermediaries, including coordination of all agreements to be entered into with such intermediaries

6. Preparation of road show presentation and frequently asked questions BRLMs IIFL

7. International institutional marketing of the Offer, which will cover, inter alia: BRLMs Kotak • Marketing strategy; • Finalizing the list and division of investors for one-to-one meetings; and • Finalizing road show and investor meeting schedule

8. Domestic institutional marketing of the Offer, which will cover, inter alia: BRLMs JM Financial • Marketing strategy; • Finalizing the list and division of investors for one-to-one meetings; and 107S. Activities Responsibility Coordination No.

• Finalizing road show and investor meeting schedule

9. Retail marketing of the Offer, which will cover, inter alia: BRLMs IIFL • Finalising media, marketing, public relations strategy and publicity budget including list of frequently asked questions at retail road shows;

• Finalising collection centres; • Finalising centres for holding conferences for brokers etc.; • Follow-up on distribution of publicity, Offer material including forms, RHP/ Prospectus and deciding on the quantum of the Offer material

10. Non-Institutional marketing of the Offer, which will cover, inter alia: BRLMs IIFL • Finalising media, marketing and public relations strategy; and • Formulating strategies for marketing to Non-Institutional Investors

11. Coordination with Stock Exchanges for book building software, bidding BRLMs Kotak terminals, mock trading, anchor coordination, anchor CAN and intimation of anchor allocation

12. Managing the book and finalization of pricing in consultation with the Company BRLMs Kotak

13. Post bidding activities including management of escrow accounts, coordinate BRLMs IIFL noninstitutional allocation, coordination with Registrar, SCSBs, Sponsor Bank and other Bankers to the Offer, intimation of allocation and dispatch of refund to Bidders, etc. Other post-Offer activities, which shall involve essential follow- up with Bankers to the Offer and SCSBs to get quick estimates of collection and advising Company about the closure of the Offer, based on correct figures, finalisation of the basis of allotment or weeding out of multiple applications, listing of instruments, dispatch of certificates or demat credit and refunds, payment of STT on behalf of the Selling Shareholders and coordination with various agencies connected with the post-Offer activity such as Registrar to the Offer, Bankers to the Offer, Sponsor Bank, SCSBs including responsibility for underwriting arrangements, as applicable. Coordinating with Stock Exchanges and SEBI for submission of all post-Offer reports including the final post-Offer report to SEBI.

Legal counsel to our Company as to Indian Law Shardul Amarchand Mangaldas & Co.

24th Floor, Express Towers Nariman Point, Mumbai 400 021 Maharashtra, India

Tel: + 91 22 4933 5555 E-mail: cm.partners@amsshardul.com Registrar to the Offer KFin Technologies Limited 301, The Centrium 3rd Floor, 57, Lal Bahadur Shastri Road Nav Pada, Kurla (West), Kurla Mumbai 400 070 Maharashtra, India

Tel: + 91 40 6716 2222/ 1800 309 4001 E-mail: aequs.ipo@kfintech.com

Website: www.kfintech.com

Contact Person: M. Murali Krishna SEBI Registration no.: INR000000221 Syndicate Member(s) JM Financial Services Limited Ground Floor, 2,3 and 4, Kamanwala Chambers, Sir P.M. Road, Fort, Mumbai - 400 001, 108Maharashtra, India

Tel: +91 22 6136 3400

Contact person: T N Kumar/ Sona Varghese E-mail: tn.kumar@jmfl.com/ sona.verghese@jmfl.com SEBI Registration no.: INZ000195834 Kotak Securities Limited 4th Floor, 12 BKC, G Block Bandra Kurla Complex, Bandra (East) Mumbai 400 051 Maharashtra, India

Tel: +91 22 6218 5410

Contact person: Umesh Gupta E-mail: umesh.gupta@kotak.com Bankers to the Offer Public Offer Account Bank(s), and Sponsor Bank HDFC Bank Limited Lodha - I Think Techno Campus, O-3 Level Next to Kanjurmarg Railway Station, Kanjurmarg (East) Mumbai 400 042, Maharashtra, India

Tel: +91 022-30752914 / 28 / 29

Contact person: Eric Bacha/ Sachin Gawade / Pravin Teli / Siddharth Jadhav / Tushar Gavankar E-mail: eric.bacha@hdfcbank.com/ sachin.gawade@hdfcbank.com/ pravin.teli2@hdfcbank.com, siddharth.jadhav@hdfcbank.com/ tushar.gavankar@hdfcbank.com Escrow Collection Bank, Refund Bank and Sponsor Bank Kotak Mahindra Bank Limited Intellion Square, 501, 5th Floor A Wing, Infinity IT Park Gen. A.K. Vaidya Marg Malad – East, Mumbai 400 097

Tel: 022 6941 0754

Contact person: Sumit Panchal E-mail: cmsipo@kotak.com Banker to our Company HDFC Bank Limited DivyaSree Chambers, 3rd Floor A Wing, O Shaughnessy Road Langford Garden Bengaluru 560 025 Karnataka, India

Tel: +91 93413 22494

Contact person: Anup Patil E-mail: anup.patil@hdfcbank.com Designated Intermediaries Self Certified Syndicate Banks The list of SCSBs notified by SEBI for the ASBA process is available at www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognised=yes, or at such other website as may be prescribed by SEBI from time to time. A list of the Designated SCSB Branches with which an ASBA Bidder (other than UPI Bidders using the UPI Mechanism), not Bidding through Syndicate/Sub Syndicate or through a Registered Broker, RTA or CDP could submit the Bid cum Application Forms, is available at www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognisedFpi=yes&intmId=34 or at such other websites as may be prescribed by SEBI from time to time.

109Self Certified Syndicate Banks and mobile applications enabled for UPI Mechanism In accordance with SEBI circular No. SEBI/HO/CFD/DIL2/CIR/P/2019/76 dated June 28, 2019, SEBI circular No. SEBI/HO/CFD/DIL2/CIR/P/2019/85 dated July 26, 2019 and SEBI circular No.

SEBI/HO/CFD/DIL2/CIR/P/2022/45 dated April 5, 2022, UPI Bidders using the UPI Mechanism may only apply through the SCSBs and mobile applications whose names appear on the website of the SEBI at www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognisedFpi=yes&intmId=40 and www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognisedFpi=yes&intmId=43 respectively, and updated from time to time.

Syndicate Self Certified Syndicate Banks Branches In relation to Bids (other than Bids by Anchor Investors and RIIs) submitted under the ASBA process to a member of the Syndicate, the list of branches of the SCSBs at the Specified Locations named by the respective SCSBs to receive deposits of Bid cum Application Forms from the members of the Syndicate is available on the website of the SEBI (www.sebi.gov.in/sebiweb/other/OtherAction.do?doRecognisedFpi=yes&intmId=35) and updated from time to time or any such other website as may be prescribed by SEBI from time to time.

Registered Brokers Bidders can submit ASBA Forms in the Offer using the stockbroker network of the Stock Exchanges, i.e., through the Registered Brokers at the Broker Centres. The list of the Registered Brokers eligible to accept ASBA Forms, including details such as postal address, telephone number and e-mail address, is provided on the websites of the Stock Exchanges at www.bseindia.com and www.nseindia.com, as updated from time to time.

Registrar and Share Transfer Agents The list of the RTAs eligible to accept ASBA Forms at the Designated RTA Locations, including details such as address, telephone number and e-mail address, is provided on the websites of the Stock Exchanges at www.bseindia.com/Static/Markets/PublicIssues/Rtadp.aspx? and https://www.nseindia.com/products- services/initial-public-offerings-asba-procedures respectively, as updated from time to time.

Collecting Depository Participants The list of the CDPs eligible to accept ASBA Forms at the Designated CDP Locations, including details such as their name and contact details, is provided on the websites of the Stock Exchanges at www.bseindia.com/Static/Markets/PublicIssues/Rtadp.aspx? and www.nseindia.com/products/content/equities/ipos/asba_procedures.htm, respectively, as updated from time to time.

110Grading of the Offer No credit agency registered with SEBI has been appointed for grading of the Offer.

Monitoring Agency Our Company has appointed CARE Ratings Limited in accordance with Regulation 41 of the SEBI ICDR Regulations, for monitoring the utilisation of the Gross Proceeds. For details in relation to the proposed utilisation of the proceeds from the Fresh Issue, please see “Objects of the Offer” on page 147.

Experts to the Offer Except as stated below, our Company has not obtained any expert opinions in connection with this Prospectus:

Our Company has received written consent dated November 26, 2025 from B S R & Co. LLP, Chartered Accountants to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013 to the extent applicable, and in their capacity as our Statutory Auditors, and in respect of their (i) examination report dated November 14, 2025, on our Restated Consolidated Financial Information; and (ii) report dated November 14, 2025, on the statement of possible special tax benefits available to (a) our Company and its Shareholders; (b) certain of our Material Subsidiaries, being AeroStructures Manufacturing India Private Limited and Aequs Engineered Plastics Private Limited, included in this Prospectus. However, the term “expert” shall not be construed to mean an “expert” as defined under the U. S. Securities Act.

Our Company has received written consent from Martin Bahl, CPA, Bahl & Co., P.C in their report dated November 13, 2025, on the statement of possible special tax benefits available to certain of our Material Subsidiaries, being, (a) Aequs Aero Machine Inc.; and (b) Aequs Oil & Gas LLC, included in this Prospectus, to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013 to the extent applicable, and in their capacity as certified public accountants in relation to the report. However, the term “expert” shall not be construed to mean an “expert” as defined under the U. S. Securities Act.

Our Company has received written consent from PKF Arsilon in their report dated November 12, 2025, on the statement of possible special tax benefits available to one of our Material Subsidiaries, being Aequs Aerospace France SAS, included in this Prospectus, to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013 to the extent applicable, and in their capacity as the statutory auditor. However, the term “expert” shall not be construed to mean an “expert” as defined under the U. S. Securities Act.

Our Company has received written consent from KC Legal in their report dated November 13, 2025, on the statement of possible special tax benefits available to one of our Material Subsidiaries, being, Aequs Aerospace B.V., included in this Prospectus, to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013 to the extent applicable. However, the term “expert” shall not be construed to mean an “expert” as defined under the U. S. Securities Act.

Our Company has received written consent dated May 31, 2025 from Manian & Rao, Chartered Accountants, bearing firm registration number 001983S, to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and an “expert”, as defined under Section 2(38) of the Companies Act 2013 in respect of various certifications issued by them in their capacity as independent chartered accountant to our Company and details derived therefrom as included in this Prospectus.

Our Company has received written consent from Vishvakarma Consultancy Services Private Limited as part of the certification issued by them dated November 16, 2025 to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under

Section 2(38) of the Companies Act 2013, in their capacity as independent chartered engineer to our Company.

The above-mentioned consents have not been withdrawn as on the date of this Prospectus.

Appraising Entity None of the objects for which the Net Proceeds will be utilised have been appraised by any bank/ financial 111institution.

Credit Rating As the Offer is of Equity Shares, credit rating is not required.

Debenture Trustees As the Offer is of Equity Shares, the appointment of debenture trustees is not required.

Green Shoe Option No green shoe option is contemplated under the Offer.

Filing of the Pre-filed Draft Red Herring Prospectus, Updated Draft Red Herring Prospectus – I, the Red Herring Prospectus and this Prospectus A copy of the Pre-filed Draft Red Herring Prospectus and the Updated Draft Red Herring Prospectus - I were uploaded on the SEBI intermediary portal at www.siportal.sebi.gov.in, in accordance with the SEBI ICDR Master

Circular, as specified in Regulation 59C(1) of SEBI ICDR Regulations. A copy of the Pre-filed Draft Red Herring Prospectus and the Updated Draft Red Herring Prospectus – I were filed with SEBI at:

Securities and Exchange Board of India Corporation Finance Department Division of Issues and Listing SEBI Bhavan, Plot No. C4 A, ‘G’ Block Bandra Kurla Complex, Bandra (East) Mumbai 400 051 Maharashtra, India A copy of the Red Herring Prospectus, along with the material contracts and documents required to be filed under

Section 32 of the Companies Act 2013 were filed with the RoC at its office and a copy of this Prospectus shall be filed under Section 26 of the Companies Act 2013 with the RoC at its office and through the electronic portal at www.mca.gov.in/mcafoportal/loginvalidateuser.do. For details of the address, see “- Address of the Registrar of Companies” on page 105.

Book Building Process Book building, in the context of the Offer, refers to the process of collection of Bids from Bidders on the basis of the Red Herring Prospectus, the Bid cum Application Forms and the Revision Forms within the Price Band. The Price Band and the minimum Bid Lot was decided by our Company, in consultation with the BRLMs, and advertised in all editions of Financial Express (a widely circulated English national daily newspaper) and all editions of Jansatta (a widely circulated Hindi national daily newspaper) and Bengaluru edition of Vishwavani (a widely circulated Kannada national daily newspaper) Kannada being the regional language of Bengaluru, Karnataka where our Registered Office is located) at least two Working Days prior to the Bid/Offer Opening Date and were made available to the Stock Exchanges for the purposes of uploading on their respective websites.

Pursuant to the Book Building Process, the Offer Price was determined by our Company, in consultation with the BRLMs after the Bid/Offer Closing Date. For details see “Offer Procedure” on page 623.

All Bidders (other than Anchor Investors) could participate in this Offer only through the ASBA process by providing details of their respective ASBA Account in which the corresponding Bid Amount was blocked by SCSBs. In addition to this, the UPI Bidders participated through the ASBA process by either (a) providing the details of their respective ASBA Account in which the corresponding Bid Amount was blocked by the SCSBs; or (b) through the UPI Mechanism. Anchor Investors were not permitted to participate in the Offer through the ASBA process.

In terms of the SEBI ICDR Regulations, QIBs and Non-Institutional Investors were not permitted to withdraw their Bid(s) or lower the size of their Bid(s) (in terms of quantity of Equity Shares bearing face value of ₹ 10 or the Bid Amount) at any stage. Retail Individual Investors and Eligible Employees Bidding in the Employee Reservation Portion could revise their Bid(s) during the Bid/Offer Period and withdraw their Bid(s) until the Bid/Offer Closing Date. Anchor Investors were not allowed to revise or withdraw their Bids after the Anchor Investor Bidding Date. Allocation to all categories, other than Anchor Investors, Non- 112Institutional Investors and Retail Individual Investors, was made on a proportionate basis, subject to valid Bids having been received at or above the Offer Price. Allocation to the Anchor Investors was on a discretionary basis.

For further details on method and process of Bidding, see “Offer Structure” and “Offer Procedure” on pages 616 and 623, respectively.

The Book Building Process and bidding process are subject to change, from time to time. Bidders were advised to make their own judgment about an investment through this process prior to submitting a Bid in the Offer.

Each Bidder by submitting a Bid in the Offer, shall be deemed to have acknowledged the above restrictions and the terms of the Offer.

Bidders should note that the Offer is also subject to (i) obtaining final listing and trading approvals of the Stock Exchanges, which our Company shall apply for after Allotment; and (ii) filing of this Prospectus with the RoC.

For further details on the method and procedure for Bidding, an illustration of the Book Building Process and the price discovery process see “Offer Procedure” and “Terms of the Offer” beginning on pages 623 and 609, respectively.

Investor Grievances Investors can contact the Company Secretary and Compliance Officer, the BRLMs or the Registrar to the Offer in case of any pre-Offer or post-Offer related problems such as non-receipt of letters of Allotment, non-credit of Allotted Equity Shares in the respective beneficiary account, non-receipt of refund orders or non-receipt of funds by electronic mode, etc.

All Offer-related grievances, other than that of Anchor Investors, may be addressed to the Registrar to the Offer with a copy to the relevant Designated Intermediary(ies) with whom the Bid-cum Application Form was submitted, giving full details such as name of the sole or First Bidder, Bid cum Application Form number, Bidder’s DP ID, Client ID, PAN, address of Bidder, number of Equity Shares bearing face value of ₹ 10 applied for, ASBA Account number in which the amount equivalent to the Bid Amount was blocked or the UPI ID (for UPI Bidders who make the payment of Bid Amount through the UPI Mechanism), date of Bid cum Application Form and the name and address of the relevant Designated Intermediary(ies) where the Bid was submitted. Further, the Bidder shall enclose the Acknowledgment Slip or the application number from the Designated Intermediary in addition to the documents or information mentioned hereinabove. All grievances relating to Bids submitted through Registered Brokers may be addressed to the Stock Exchanges with a copy to the Registrar to the Offer. The Registrar to the Offer were required to obtain the required information from the SCSBs for addressing any clarifications or grievances of ASBA Bidders.

All Offer-related grievances of the Anchor Investors may be addressed to the Registrar to the Offer, giving full details such as the name of the sole or First Bidder, Anchor Investor Application Form number, Bidders’ DP ID, Client ID, PAN, date of the Anchor Investor Application Form, address of the Bidder, number of the Equity Shares bearing face value of ₹ 10 applied for, Bid Amount paid on submission of the Anchor Investor Application Form and the name and address of the BRLMs where the Anchor Investor Application Form was submitted by the Anchor Investor.

The Bidder shall also enclose a copy of the Acknowledgment Slip duly received from the concerned Designated Intermediary in addition to the information mentioned above.

Underwriting Agreement Our Company entered into an underwriting agreement with the Underwriters for the Equity Shares proposed to be offered through the Offer. The extent of underwriting obligations and the Bids to be underwritten by each BRLM shall be as per the Underwriting Agreement. Pursuant to the terms of the Underwriting Agreement, the obligations of the Underwriters are several and are subject to certain conditions to closing, as specified therein.

The Underwriting Agreement is dated December 5, 2025. The Underwriters have indicated their intention to underwrite the following number of Equity Shares bearing face value of ₹ 10:

113Indicative number of Amount Name, address, telephone number and e-mail address of Equity Shares bearing face underwritten the Underwriters value of ₹ 10 to be (₹ in million) underwritten JM Financial Limited 6,240,427 773.16 7th Floor, Cnergy Appasaheb Marathe Marg, Prabhadevi, Mumbai 400 025 Maharashtra, India

Telephone: + 91 22 6630 3030/ 3632 E-mail:aequs.ipo@jmfl.com IIFL Capital Services Limited (formerly known as IIFL 6,240,526 773.18 Securities Limited) 24th Floor, One Lodha Place Senapati Bapat Marg, Lower Parel (West) Mumbai 400 013 Maharashtra, India

Telephone: + 91 22 4646 4728 E-mail: aequs.ipo@iiflcap.com Kotak Mahindra Capital Company Limited 6,240,426 773.16 27 BKC, 1st Floor, Plot No. C – 27 “G” Block, Bandra Kurla Complex Bandra (East), Mumbai 400 051 Maharashtra, India

Telephone: +91 22 4336 0000 E-mail: aequs.ipo@kotak.com JM Financial Services Limited 100 0.01 Ground Floor, 2, 3 & 4, Kamanwala Chambers Sir P M Road, Fort Mumbai 400 001 Maharashtra, India

Telephone: + 91 22 6136 3400 E-mail: tn.kumar@jmfl.com /sona.verghese@jmfl.com Kotak Securities Limited 100 0.01 4th Floor, 12 BKC, G Block Bandra Kurla Complex, Bandra (East) Mumbai 400 051 Maharashtra, India

Telephone: +91 22 6218 5410 E-mail: umesh.gupta@kotak.com Total 18,721,579 2,319.53 The abovementioned amounts are provided for indicative purposes only and will be finalised after the pricing and actual allocation and subject to the provisions of Regulation 40(3) of the SEBI ICDR Regulations.

In the opinion of our Board of Directors (based on representations made to our Company by the Underwriters), the resources of the Underwriters are sufficient to enable them to discharge their respective underwriting obligations in full. The Underwriters are registered with the SEBI under Section 12(1) of the SEBI Act or registered as brokers with the Stock Exchange(s). Our Board of Directors, at its meeting held on December 5, 2025 has accepted and entered into the Underwriting Agreement mentioned above on behalf of our Company.

Allocation among the Underwriters may not necessarily be in proportion to their underwriting commitments set forth in the table above. In the event of any default in payment, the respective Underwriter, in addition to other obligations defined in the Underwriting Agreement, will also be required to procure subscription for or subscribe to the Equity Shares to the extent of the defaulted amount in accordance with the Underwriting Agreement.

114CAPITAL STRUCTURE The share capital of our Company, as of the date of this Prospectus, is set forth below: (in ₹, except share data) Aggregate value at Aggregate value at S. No. Particulars face value Offer Price* A) AUTHORIZED SHARE CAPITAL(1) 1,014,629,934 Equity Shares bearing face value of ₹ 10 each 10,146,299,340 - B) ISSUED, SUBSCRIBED AND PAID-UP SHARE CAPITAL BEFORE THE OFFER, AS OF THE DATE OF THIS PROSPECTUS 616,617,677 Equity Shares bearing face value of ₹ 10 each 6,166,176,770 - C) THE OFFER Offer of 74,355,351* Equity Shares bearing face value of ₹ 10 743,553,510 9,218,116,732 each aggregating to ₹ 9,218.12* million(2)

Of which:

Fresh Issue of 54,047,958* Equity Shares bearing face value of 540,479,580 6,700,000,000 ₹ 10 each aggregating to ₹ 6,700.00 million(2)(4) Offer for sale of to 20,307,393 Equity Shares bearing face value 203,073,930 2,518,116,732 of ₹ 10 aggregating to ₹ 2,518.12 million*(2)(3) Employee Reservation Portion of 176,991* Equity Shares of face 1,769,910 20,000,000 value of ₹ 10 each aggregating to ₹ 20.00 million(5) D) ISSUED, SUBSCRIBED AND PAID-UP SHARE CAPITAL AFTER THE OFFER 670,665,635 Equity Shares bearing face value of ₹ 10 each 6,706,656,350 - E) SECURITIES PREMIUM ACCOUNT Before the Offer 18,794,652,824 After the Offer 24,954,173,135 * Subject to finalisation of the Basis of Allotment.

1. For details in relation to changes in the authorized share capital of our Company in the last 10 years, see “History and Certain Corporate Matters – Amendments to the Memorandum of Association in the last 10 years” on page 336.

2. The Offer has been authorized by a resolution of our Board dated May 10, 2025, and the Fresh Issue has been approved by a special resolution dated May 13, 2025.

3. Each of the Selling Shareholders have, severally and not jointly, confirmed that their respective portion of the Offered Shares have been held for a period of at least one year prior to the filing of the UDRHP - I with SEBI and are accordingly eligible for being offered for sale in the Offer, in terms of Regulations 8 and 8A of the SEBI ICDR Regulations. For details of the consents of the Selling Shareholders in relation to the Offer for Sale, see “The Offer” and “Other Regulatory and Statutory Disclosures” on pages 95 and 591, respectively.

Our Board has taken on record such consents of the Selling Shareholders by a resolution dated May 30, 2025.

4. Our Company, in consultation with the BRLMs, undertook a Pre-IPO Placement, as permitted under applicable law, aggregating to ₹ 1,440.00 million. The Pre-IPO Placement, was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹

123.97 per Equity Share bearing face value of ₹ 10 each, decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue, as disclosed in the UDRHP – I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue, as disclosed in the UDRHP – I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.

5. The initial allocation to an Eligible Employee in the Employee Reservation Portion did not exceed ₹ 0.20 million (net of Employee Discount), however, an Eligible Employee could submit a Bid for a maximum Bid Amount of ₹ 0.50 million (net of Employee Discount) under the Employee Reservation Portion. Only in the event of an undersubscription in the Employee Reservation Portion post initial allocation, such unsubscribed portion was required to be allocated on a proportionate basis to Eligible Employees Bidding in the Employee Reservation Portion, for a value in excess of ₹ 0.20 million (net of Employee Discount), subject to the maximum value of Allotment made to an Eligible Employee not exceeding ₹ 0.50 million (net of Employee Discount). Further, an Eligible Employee Bidding in the Employee Reservation Portion could also Bid under the Retail Category in the Net Offer and such Bids were not treated as multiple Bids. The Employee Reservation Portion did not exceed 5% of our post-Offer paid-up Equity Share capital. For further details, see “Offer Structure” beginning on page 616.

115Notes to the Capital Structure Share capital history of our Company

(a) History of Equity Share capital of our Company

The following table sets forth the history of the Equity Share capital of our Company:

Face Cumulative value Issue Cumulative Date of Reason for / No. of Equity number of per price per Nature of Details of allottees paid-up equity allotment nature of allotment Shares allotted Equity Equity Equity consideration share capital Shares Share Share (₹) (₹) March 22, 100 Equity Shares to Jagadish Initial subscription to 200 200 10 10 2,000 Cash 2000(1) Shivaputrappa Melligeri and 100 Equity the MoA Shares to Ajit Aravind Prabhu March 25, 502 Equity Shares to Jagadish Further issue 9,800 10,000 10 10 100,000 Cash 2002 Shivaputrappa Melligeri and 9,298 Equity Shares to Quality Engineering & Software Technologies Private Limited March 24, 171,481 Equity Shares to Quality Further issue 171,481 181,481 10 10 1,814,810 Cash 2006 Engineering & Software Technologies Private Limited June 9, 2006 400,000 Equity Shares to Quality Further issue 400,000 581,481 10 10 5,814,810 Cash Engineering & Software Technologies Private Limited October 21, 1,320,000 Equity Shares to Quality Further issue 1,320,100 1,901,581 10 10 19,015,810 Cash 2006 Engineering & Software Technologies Private Limited and 100 Equity Shares to Carlyle Asia Venture Partners II LP March 31, 8,098,419 Equity Shares to Quality Further issue 8,098,419 10,000,000 10 10 100,000,000 Cash 2008 Engineering & Software Technologies Private Limited March 31, 9,000,000 Equity Shares to Quality Further issue 9,000,000 19,000,000 10 10 190,000,000 Cash 2009 Engineering & Software Technologies Private Limited March 26, 6,894,735 Equity Shares to Quality Further issue 6,894,735 25,894,735 10 10 258,947,350 Cash 2010 Engineering & Software Technologies Private Limited 116Face Cumulative value Issue Cumulative Date of Reason for / No. of Equity number of per price per Nature of Details of allottees paid-up equity allotment nature of allotment Shares allotted Equity Equity Equity consideration share capital Shares Share Share (₹) (₹) March 31, 6,000,000 Equity Shares to Quality Further issue 6,000,000 31,894,735 10 10 318,947,350 Cash 2010 Engineering & Software Technologies Private Limited April 14, 5,717,462 Equity Shares to QMSEZ Inc. Further issue 5,717,462 37,612,197 10 10 376,121,970 Cash 2011 (currently known as Aequs Inc.) November 2,250,187 Equity Shares to QMSEZ Inc. Further issue 2,250,187 39,862,384 10 10 398,623,840 Cash 8, 2011 (currently known as Aequs Inc.) December 6,432,500 Equity Shares to Melligeri Further issue 6,432,500 46,294,884 10 10 462,948,840 Cash 15, 2011 Private Family Foundation September 1,239,560 Equity Shares to QMSEZ Inc. Further issue 1,239,560 47,534,444 10 10 475,344,440 Cash 14, 2012 (currently known as Aequs Inc.) December 100 Equity Shares to Anasuya Melligeri Further issue 200 47,534,644 10 10 475,346,440 Cash 18, 2012 and 100 Equity Shares to Appanna Patil February 14, 5,850,000 Equity Shares to Prabhu Private Further issue 5,850,000 53,384,644 10 10 533,846,440 Cash 2013 Trust@ March 25, 9,216,874 Equity Shares to Melligeri Conversion of loan 9,216,874 62,601,518 10 10 626,015,180 Cash(2) 2013 Private Family Foundation and issuance of Equity Shares April 25, 8,733,885 Equity Shares to Avija Further issue 8,733,885 71,335,403 10 10 713,354,030 Cash 2013 Investments Mauritius Private Limited (currently known as Aequs Manufacturing Investments Private Limited) May 6, 2013 32,400,000 Equity Shares to Anasuya Further issue 32,400,000 103,735,403 10 10 1,037,354,030 Cash Melligeri October 25, 5,500,000 Equity Shares to QuEST Global Further issue 5,500,000 109,235,403 10 10 1,092,354,030 Cash 2013 Manufacturing Stock Option Plan Trust (currently known as Aequs Stock Option Plan Trust) March 31, 8,400,000 Equity Shares to Aequs Private placement 8,400,000 117,635,403 10 14.88 1,176,354,030 Cash 2015 Manufacturing Investments Private Limited March 1, 28,704,159 Equity Shares to Aequs Rights issue 30,382,173 148,017,576 10 23.78 1,480,175,760 Cash 2016 Manufacturing Investments Private Limited, 576,282 Equity Shares to Edward Brown, 431,952 Equity Shares to Meera Sawkar, 630,782 Equity Shares to Ajay 117Face Cumulative value Issue Cumulative Date of Reason for / No. of Equity number of per price per Nature of Details of allottees paid-up equity allotment nature of allotment Shares allotted Equity Equity Equity consideration share capital Shares Share Share (₹) (₹) Aravind Prabhu and 38,998 Equity Shares to Michael Propen March 30, 210,261 Equity Shares to Poonam Prabhu, Private placement 5,860,912 153,878,488 10 23.78 1,538,784,880 Cash 2016 200,000 Equity Shares to Jagadish Shivaputrappa Melligeri, 100,000 Equity Shares to Nirmala Melligeri, 200,000 Equity Shares to Raman Subramanian, 83,843 Equity Shares to B A Suresh, 558,957 Equity Shares to Vivekanandhan Maripudi, 3,110,526 Equity Shares to Aequs Manufacturing Investments Private Limited and 1,397,325 Equity Shares to Melligeri Investments LLC July 25, 2,900,000 Equity Shares to Aequs Stock Preferential allotment 2,900,000 156,778,488 10 23.78 1,567,784,880 Cash 2016 Option Plan Trust December 12,867,900 Equity Shares to Aequs SEZ Private placement 12,867,900 169,646,388 10 23.78 1,696,463,880 Cash 12, 2016 Private Limited March 14, 6,629,900 Equity Shares to Aequs Private placement 6,629,900 176,276,288 10 23.78 1,762,762,880 Cash 2017 Manufacturing Investments Private Limited March 17, 1,945,350 Equity Shares to Aequs Private placement 1,945,350 178,221,638 10 23.78 1,782,216,380 Cash 2017 Manufacturing Investments Private Limited June 28, 8,000,000 Equity Shares to Jagadish Private placement 8,000,000 186,221,638 10 40.21 1,862,216,380 Cash 2017 Shivaputrappa Melligeri July 21, 3,315,593 Equity Shares to Jagadish Private placement 3,315,593 189,537,231 10 40.21 1,895,372,310 Cash 2017 Shivaputrappa Melligeri October 9, 6,394,620 Equity Shares to Jagadish Private placement 7,694,620 197,231,851 10 40.21 1,972,318,510 Cash 2017 Shivaputrappa Melligeri and 1,300,000 Equity Shares to Aequs Manufacturing Investments Private Limited December 1,992,241 Equity Shares to SKM LLC Private placement 1,992,241 199,224,092 10 40.21 1,992,240,920 Cash 16, 2017 November 16,828,000 Equity Shares to Jagadish Private placement 16,828,000 216,052,092 10 41.04 2,160,520,920 Cash 16, 2018 Shivaputrappa Melligeri December 5, 715,885 Equity Shares to Aequs Private placement 715,885 216,767,977 10 41.04 2,167,679,770 Cash 2018 Manufacturing Investments Private Limited 118Face Cumulative value Issue Cumulative Date of Reason for / No. of Equity number of per price per Nature of Details of allottees paid-up equity allotment nature of allotment Shares allotted Equity Equity Equity consideration share capital Shares Share Share (₹) (₹) December 6,825,000 Equity Shares to Aequs Private placement 7,556,000 224,323,977 10 41.04 2,243,239,770 Cash 10, 2018 Manufacturing Investments Private Limited and 731,000 Equity Shares to Jagadish Shivaputrappa Melligeri October 26, 3,258,752 Equity Shares to Aequs Private placement 5,070,013 229,393,990 10 41.42 2,293,939,900 Cash 2019 Manufacturing Investments Private Limited and 1,811,261 Equity Shares to Jagadish Shivaputrappa Melligeri February 16, 30,665,000 Equity Shares to Aequs Private placement 30,665,000 260,058,990 10 26.60 2,600,589,900 Cash 2021 Manufacturing Investments Private Limited March 30, 15,917,500 Equity Shares to Aequs Private placement 15,917,500 275,976,490 10 26.60 2,759,764,900 Cash 2021 Manufacturing Investments Private Limited August 14, 2,692,499 Equity Shares to Aequs Private placement 2,692,499 278,668,989 10 26.00 2,786,689,890 Cash 2021 Manufacturing Investments Private Limited August 23, 7,115,500 Equity Shares to Aequs Private placement 7,115,500 285,784,489 10 26.00 2,857,844,890 Cash 2021 Manufacturing Investments Private Limited November 11,300,000 Equity Shares to Aequs Private placement 11,300,000 297,084,489 10 26.10 2,970,844,890 Cash 26, 2021 Manufacturing Investments Private Limited December 6, 54,840,368 Equity Shares to Aequs Private placement 54,840,368 351,924,857 10 N.A. 3,519,248,570 Other than cash(3) 2021 Manufacturing Investments Private Limited December 3,000,000 Equity Shares to Aequs Stock Private placement 3,603,432 355,528,289 10 26.10 3,555,282,890 Cash 15, 2021 Option Plan Trust and 603,432 Equity Shares to Rohit Hegde December 3,000,000 Equity Shares to Aequs Stock Private placement 3,000,000 358,528,289 10 26.10 3,585,282,890 Cash 22, 2021 Option Plan Trust February 12, 29,486,590 Equity Shares to Aequs Private placement 29,486,590 388,014,879 10 26.10 3,880,148,790 Cash 2022 Manufacturing Investments Private Limited February 27, 7,943,221 Equity Shares to Shares to Aequs Private placement 7,943,221 395,958,100 10 N.A. 3,959,581,000 Other than cash(4) 2022 Manufacturing Investments Private Limited March 12, 28,799,776 Equity Shares to Aequs Conversion of 2023 Manufacturing Investments Private Limited compulsorily 18,961,938^ N.A.^^ convertible 424,757,876 10 4,247,578,760 N.A.^ debentures of par 9,837,838^ N.A.^^^ value ₹ 100(5) 119Face Cumulative value Issue Cumulative Date of Reason for / No. of Equity number of per price per Nature of Details of allottees paid-up equity allotment nature of allotment Shares allotted Equity Equity Equity consideration share capital Shares Share Share (₹) (₹) March 24, 135 Equity Shares to Amicus Capital Private placement 150 424,758,026 10 22.40 4,247,580,260 Cash 2023 Private Equity I LLP and 15 Equity Shares to Amicus Capital Partners India Fund I April 21, 200 Equity Shares to Amicus Capital Private placement 200 424,758,226 10 22.40 4,247,582,260 Cash 2023 Partners India Fund II October 25, 350 Equity Shares to Amansa Investments Private placement 737 424,758,963 10 31.56 4,247,589,630 Cash 2023 Limited, 50 Equity Shares to Catamaran Ekam#, 200 Equity Shares to Steadview Capital Mauritius Limited and 137 Equity Shares to Sparta Group LLC October 30, 10 Equity Shares to Ravindra K Mariwala, Private placement 40 424,759,003 10 31.56 4,247,590,030 Cash 2023 10 Equity Shares to Vasundhara Dempo Family Private Trust, 10 Equity Shares to Girija Dempo Family Private Trust, 10 Equity Shares to Mukul Mahavir Agarwal 19,745,845 Equity Shares to Amicus Conversion of CCPS 46,818,017 471,577,020 10 N.A.^ 4,715,770,200 N.A.^ Capital Private Equity I LLP, 1,991,104 in the ratio of Equity Shares to Amicus Capital Partners 2.6318(6) India Fund I, 25,081,068 Equity Shares to Amicus Capital Partners India Fund II 18,457,427 Equity Shares to Catamaran Conversion of CCPS 110,251,920 581,828,940 10 N.A.^ 5,818,289,400 N.A.^ March 30, Ekam#, 20,426,075 Equity Shares to in the ratio of 2025 Steadview Capital Mauritius Limited, 2.5750(6) 15,750,243 Equity Shares to Sparta Group LLC, 2,460,995 Equity Shares to Ravindra Mariwala, 1,230,497 Equity Shares to Vasundhara Dempo Family Private Trust, 1,230,497 Equity Shares to Girija Dempo Family Private Trust, 2,460,995 Equity Shares to Mukul Agarwal, 48,235,191 Equity Shares to Amansa Investments Limited May 2, 2025 11,366,365 Equity Shares to Aequs Rights issue 17,173,024 599,001,964 10 74.64 5,990,019,640 Cash Manufacturing Investments Private Limited 1,897,322 Equity Shares to Amansa Investments Limited, 745,028 Equity Shares to Amicus Capital Partners India 120Face Cumulative value Issue Cumulative Date of Reason for / No. of Equity number of per price per Nature of Details of allottees paid-up equity allotment nature of allotment Shares allotted Equity Equity Equity consideration share capital Shares Share Share (₹) (₹) Fund II, 1,651,699 Equity Shares to Steadview Capital Mauritius Limited, 548,271 Equity Shares to Catamaran Ekam#, 173,156 Equity Shares to Vivekanandhan Maripudi, 138,219 Equity Shares to Amgele Family Private Trust, 73,103 Equity Shares to Ravindra Mariwala, 136,285 Equity Shares to Mukul Agrawal, 59,179 Equity Shares to Sanjeev Mehra, 52,629 Equity Shares to Siddharth Sawkar, 37,291 Equity Shares to Manu Sawkar, 36,552 Equity Shares to Vasundhara Dempo Family Private Trust, 36,552 Equity Shares to Girija Dempo Family Private Trust, 25,677 Equity Shares to James Gallo, 20,986 Equity Shares to Nirmala Melligeri, 14,854 Equity Shares to Babasaheb Appanna Patil, 28,395 Equity Shares to Rohit Hegde, 15,065 Equity Shares to Shaila Melligeri, 20,000 Equity Shares to Raman Subramanian, 5,969 Equity Shares to Andrew David Buchan, 20,860 Equity Shares to Mahantesh Patil, 5,347 Equity Shares to Durvigere Shivamurthy Mohan, 44,612 Equity Shares to Asha Gowda, 2,971 Equity Shares to Shubhada Rao, 2,923 Equity Shares to K S Arunkumar, 1,244 Equity Shares to S T Sampathkumaran, 7,668 Equity Shares to Ramakant Dokania, 557 Equity Shares to Basavaraj Sugandhi, 535 Equity Shares to Naseem Jamadar, 440 Equity Shares to Praveen Ashtekar, 408 Equity Shares to Sridhar Rao, 1,047 Equity Shares to Basavaraja Chelemar, 227 Equity Shares to A Sree Rakesh Velan, 208 Equity Shares to Pravin C Masodge, 1,159 Equity Shares to 121Face Cumulative value Issue Cumulative Date of Reason for / No. of Equity number of per price per Nature of Details of allottees paid-up equity allotment nature of allotment Shares allotted Equity Equity Equity consideration share capital Shares Share Share (₹) (₹) Adarsha Somashekar, 119 Equity Shares to Dhaval Chitnis and 102 Equity Shares to Sudarshan P Hunswadkar July 8, 2025 3,000,000 Equity Shares to Aequs Stock Private placement 3,000,000 602,001,964 10 74.64 6,020,019,640 Cash Option Plan Trust July 14, 3,000,000 Equity Shares to Aequs Stock Private placement 3,000,000 605,001,964 10 74.64 6,050,019,640 Cash 2025 Option Plan Trust November 5,081,874 Equity Shares to SBI Emergent Private placement## 11,615,713 616,617,677 10 123.97 6,166,176,770 Cash 10, 2025 India Fund, 3,226,587 Equity Shares to DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, 2,984,593 Equity Shares to SBI Optimal Equity Fund – Long Term, 322,659 Equity Shares to Think India Opportunities Master Fund LP

(1) Our Company was incorporated on March 27, 2000. The date of subscription to the Memorandum of Association is March 22, 2000, and the allotment of Equity Shares pursuant to such subscription was taken on record by our Board on March 28, 2000.

(2) Pursuant to a resolution passed by our Board on December 18, 2012, and consent letter issued by Melligeri Private Family Foundation dated January 1, 2013, our Company approved the allotment of 9,216,874 Equity Shares to Melligeri Private Family Foundation, upon conversion of outstanding loan together with the interest accrued amounting to ₹ 86,343,740 (as on December 31, 2012) pursuant to the loan agreements dated (i) August 9, 2012; (ii) October 5, 2012; and (iii) November 12, 2012, entered into between Melligeri Private Family Foundation and our Company. Accordingly, out of the total consideration of ₹ 92,168,740, (i) our Company received a consideration of ₹ 58,25,000 in cash from Melligeri Private Family Foundation; and (ii) for the remaining consideration of ₹ 86,343,740, our Company allotted 9,216,874 Equity Shares bearing face value of ₹ 10 each to Melligeri Private Family Foundation, in lieu of the outstanding loan, as consideration other than cash.

(3) Pursuant to the share purchase agreement dated December 2, 2021, entered into between our Company and AMIPL, our Company allotted 54,840,368 Equity Shares bearing face value of ₹ 10 each to AMIPL as consideration for the purchase of (i) 7,117,373 equity shares of ACPPL; (ii) 32,087,355 equity shares of AFC; and (iii) 92,093,337 equity shares of AEPPL, held by AMIPL, pursuant to share swap arrangement. For further details, please see “History and Other Corporate Matters - Details of shareholder agreements - Share purchase agreement dated December 2, 2021, entered into between our Company and Aequs Manufacturing Investments Private Limited” on page 341.

(4) Pursuant to the debenture purchase agreement dated February 25, 2022, entered into among our Company and AMIPL, our Company allotted 7,943,221 Equity Shares to AMIPL as consideration for the purchase of 20,325,300 compulsorily convertible debentures of AFC held by AMIPL.

(5) Pursuant to the debenture subscription agreements dated (i) July 4, 2022; (ii) August 22, 2022; (iii) October 3, 2022; and (iv) November 9, 2022, AMIPL subscribed to 3,900,000; 1,580,000; 1,562,000; and 1,281,250 compulsorily convertible debentures of our Company, respectively. Upon conversion of such compulsorily convertible debentures, our Company allotted (i) 13,494,810 Equity Shares; (ii) 5,467,128 Equity Shares; (iii) 5,405,405 Equity Shares; and 4,432,433 Equity Shares to AMIPL.

(6)Pursuant to a resolution of our Board dated March 30, 2025, 407,115,771 CCPS were converted to 157,069,937 Equity Shares bearing face value of ₹ 10 each. ^ Consideration for such Equity Shares (issued pursuant to such conversion of CCDs and CCPS) were paid at the time of issuance of such CCDs and CCPS.

^^ The fair market value of the 18,961,938 Equity Shares bearing face value of ₹ 10 each, considered at the time of issuance of the CCDs was ₹ 28.90. ^^^ The fair market value of the 9,837,838 Equity Shares bearing face value of ₹ 10 each, considered at the time of issuance of the CCDs was ₹ 29.60.

@ Acting through its trustee, IL & FS Trust Company Limited. # Acting through its trustee, Catamaran Advisors LLP. ## Our Company, in consultation with the BRLMs, undertook a Pre-IPO Placement, as permitted under applicable law, aggregating to ₹ 1,440.00 million. The Pre-IPO Placement, was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹ 123.97 per Equity Share bearing face value ₹ 10, decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue, as disclosed in the UDRHP – I, our 122Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue, as disclosed in the UDRHP-I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.

(b) As on date of this Prospectus, our Company does not have any outstanding Preference Shares.

123(c) Shares issued for consideration other than cash or out of revaluation reserves (excluding bonus issue) Except as disclosed below, our Company has not issued any Equity Shares for consideration other than cash since

its incorporation:

Face Number of value of Benefits accrued Date of Reason for Details/ Name of Equity Shares Issue equity pursuant to the allotment allotment allottees allotted price shares allotment (₹) December 6, Private Aequs 10 54,840,368* N.A. Consolidation of the 2021 placement Manufacturing shareholding held by Investments our Company in its Private Limited Subsidiaries February 27, Private Aequs 10 7,943,221** N.A. Consolidation of the 2022 placement Manufacturing shareholding held by Investments our Company in its Private Limited Subsidiaries *Pursuant to the share purchase agreement dated December 2, 2021, entered into between our Company and AMIPL, our Company allotted 54,840,368 Equity Shares bearing face value of ₹ 10 each to AMIPL as consideration for the purchase of (i) 7,117,373 equity shares of ACPPL; (ii) 32,087,355 equity shares of AFC; and (iii) 92,093,337 equity shares of AEPPL, held by AMIPL, pursuant to share swap arrangement. For further details, please see “History and Other Corporate Matters - Details of shareholder agreements- Share purchase agreement dated December 2, 2021, entered into between our Company and Aequs Manufacturing Investments Private Limited (“SPA”)” on page 341.

** Pursuant to the debenture purchase agreement dated February 25, 2022, entered into among our Company and AMIPL, our Company allotted 7,943,221 Equity Shares to AMIPL as consideration for the purchase of 20,325,300 compulsorily convertible debentures of AFC held by AMIPL.

Further, our Company has not issued any Equity Shares out of revaluation reserves since its incorporation.

2. Issue of Equity Shares at a price lower than the Offer Price in the last one year (excluding bonus issue) The Offer Price shall be determined by our Company, in consultation with the BRLMs after the Bid/Offer Closing Date. The details of the Equity Shares issued by our Company in the last one year preceding the date of this

Prospectus which may have been issued at a price lower than the Offer Price are as follows:

Date of Details of allottees Reason/ Number of Face Issue Nature of allotment nature for Equity value Price consideration allotment Shares per per allotted Equity Equity Share Share (in ₹) (in ₹) May 2, 11,366,365 Equity Shares to Rights issue 17,173,024 10 74.64 Cash 2025 Aequs Manufacturing Investments Private Limited 1,897,322 Equity Shares to Amansa Investments Limited, 745,028 Equity Shares to Amicus Capital Partners India Fund II, 1,651,699 Equity Shares to Steadview Capital Mauritius Limited, 548,271 Equity Shares to Catamaran Ekam#, 173,156 Equity Shares to Vivekanandhan Maripudi, 138,219 Equity Shares to Amgele Family Private Trust, 73,103 Equity Shares to Ravindra Mariwala, 136,285 Equity Shares to Mukul Agarwal, 59,179 Equity Shares to Sanjeev Mehra, 52,629 Equity Shares to Siddharth Sawkar, 37,291 Equity Shares to Manu Sawkar, 36,552 Equity Shares to Vasundhara Dempo Family Private Trust, 36,552 Equity Shares to Girija Dempo 124Date of Details of allottees Reason/ Number of Face Issue Nature of allotment nature for Equity value Price consideration allotment Shares per per allotted Equity Equity Share Share (in ₹) (in ₹) Family Private Trust, 25,677 Equity Shares to James Gallo, 20,986 Equity Shares to Nirmala Melligeri, 14,854 Equity Shares to Babasaheb Appanna Patil, 28,395 Equity Shares to Rohit Hegde, 15,065 Equity Shares to Shaila Melligeri, 20,000 Equity Shares to Raman Subramanian, 5,969 Equity Shares to Andrew David Buchan, 20,860 Equity Shares to Mahantesh Patil, 5,347 Equity Shares to Durvigere Shivamurthy Mohan, 44,612 Equity Shares to Asha Gowda, 2,971 Equity Shares to Shubhada Rao, 2,923 Equity Shares to K S Arunkumar, 1,244 Equity Shares to S T Sampathkumaran, 7,668 Equity Shares to Ramakant Dokania, 557 Equity Shares to Basavaraj Sugandhi, 535 Equity Shares to Naseem Jamadar, 440 Equity Shares to Praveen Ashtekar, 408 Equity Shares to Sridhar Rao, 1,047 Equity Shares to Basavaraja Chelemar, 227 Equity Shares to A Sree Rakesh Velan, 208 Equity Shares to Pravin C Masodge, 1,159 Equity Shares to Adarsha Somashekar, 119 Equity Shares to Dhaval Chitnis and 102 Equity Shares to Sudarshan P Hunswadkar July 8, 3,000,000 Equity Shares to Aequs Private 3,000,000 10 74.64 Cash 2025 Stock Option Plan Trust placement July 14, 3,000,000 Equity Shares to Aequs Private 3,000,000 10 74.64 Cash 2025 Stock Option Plan Trust placement November 5,081,874 Equity Shares to SBI Private 11,615,713 10 123.97 Cash 10, 2025 Emergent India Fund, 3,226,587 placement## Equity Shares to DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, 2,984,593 Equity Shares to SBI Optimal Equity Fund – Long Term, 322,659 Equity Shares to Think India Opportunities Master Fund LP # Acting through its trustee, Catamaran Advisors LLP.

## Our Company, in consultation with the BRLMs, undertook a Pre-IPO Placement, as permitted under applicable law, aggregating to ₹ 1,440.00 million. The Pre-IPO Placement, was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹ 123.97 per Equity Share bearing face value ₹ 10 each, as decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue, as disclosed in the UDRHP - I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue, as disclosed in the UDRHP - I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.

1253. Issue of shares pursuant to any schemes of arrangement Our Company has not allotted any Equity Shares pursuant to any scheme of arrangement approved under Sections 391-394 of the Companies Act 1956 or Sections 230-234 of the Companies Act 2013.

1264. History of build-up of Promoters’ shareholding and lock-in of Promoters’ shareholding As on the date of this Prospectus, certain of our Promoters, namely, Aravind Shivaputrappa Melligeri, Aequs Manufacturing Investments Private Limited and Melligeri Private Family Foundation, hold, in aggregate, 393,569,795 Equity Shares, which constitutes 63.82% of the issued, subscribed and paid-up Equity Share capital of our Company.

Further, as on the date of this Prospectus, one of our Corporate Promoters, The Melligeri Foundation does not hold any Equity Shares in our Company. All the Equity Shares held by our Promoters are held in dematerialised form.

(a) Build-up of Promoters’ shareholding in our Company Set forth below is the build-up of our Promoters’ Equity shareholding since the incorporation of our Company:

Face No. of Equity value per % of the pre- % of the post- Date of allotment/ Nature of Issue/ acquisition/ transfer Nature of transaction Shares allotted/ Equity Offer Equity Offer Equity transfer consideration price per Equity Share (₹) transferred Share Share c apital Share capital (₹) Aravind Shivaputrappa Melligeri October 26, 2007(1) Transfer from Carlyle Asia 100 Cash 10 10 Negligible Negligible Venture Partners II LP January 28, 2008(2) Gift to Ajay Aravind Prabhu (100) Other than cash 10 N.A. Negligible Negligible December 30, 2021 Transfer from Jagadish 500,000 Cash 10 26.10 0.08 0.07 Shivaputrappa Melligeri March 24, 2025 Transfer from Aequs Stock 500,000 Cash 10 10 0.08 0.07 Option Plan Trust Sub-total (A) 1,000,000 0.16 0.14 Aequs Manufacturing Investments Private Limited April 25, 2013 Further issue 8,733,885 Cash 10 10 1.42 1.30 June 7, 2013 Transfer from QMSEZ Inc. Cash 10 10 0.18 0.16 (currently known as Aequs 1,099,259 Inc.) March 31, 2015 Private placement 8,400,000 Cash 10 14.88 1.36 1.25 March 1, 2016 Rights issue 28,704,159 Cash 10 23.78 4.66 4.28 March 30, 2016 Private placement 3,110,526 Cash 10 23.78 0.50 0.46 March 14, 2017 Private placement 6,629,900 Cash 10 23.78 1.08 0.99 March 17, 2017 Private placement 1,945,350 Cash 10 23.78 0.32 0.29 March 30, 2017 Transfer to Aequs Mauritius (1,200,000) Cash 10 23.78 (0.19) (0.18) Stock Incentive Trust October 9, 2017 Private placement 1,300,000 Cash 10 40.21 0.21 0.19 December 4, 2017 Transfer to H Y Nagappa (63,000) Cash 10 40.21 (0.01) (0.01) December 20, 2017 Transfer to Santosh Rao (323,000) Cash 10 40.21 (0.05) (0.05) December 28, 2017 Transfer to Anupama Sawkar (6,400) Cash 10 40.21 Negligible Negligible 127Face No. of Equity value per % of the pre- % of the post- Date of allotment/ Nature of Issue/ acquisition/ transfer Nature of transaction Shares allotted/ Equity Offer Equity Offer Equity transfer consideration price per Equity Share (₹) transferred Share Share c apital Share capital (₹) January 17, 2018 Transfer to Vivekanandhan (187,615) Cash 10 40.21 (0.03) (0.03) Maripudi Transfer to Amarnath Gowda (38,080) Cash 10 40.21 (0.01) (0.01) Transfer to Chaitra Gowda (13,335) Cash 10 40.21 Negligible Negligible Transfer to Asha Gowda (13,335) Cash 10 40.21 Negligible Negligible Transfer to B A Suresh (29,449) Cash 10 40.21 Negligible Negligible July 1, 2018 Transfer to Vivekanandhan (154,615) Cash 10 43.19* (0.03) (0.02) Maripudi Transfer to Amarnath Gowda (73,362) Cash 10 43.19* (0.01) (0.01) Transfer to Shivshankar (2,628) Cash 10 43.20* Negligible Negligible Sanikop Transfer to B A Suresh (25,269) Cash 10 43.19* Negligible Negligible October 17, 2018 Transfer to Aura Trust** (137,837) Cash 10 46.30*** (0.02) (0.02) December 5, 2018 Private placement 715,885 Cash 10 41.04 0.12 0.11 December 10, 2018 Private placement 6,825,000 Cash 10 41.04 1.11 1.02 October 26, 2019 Private placement 3,258,752 Cash 10 41.42 0.53 0.49 February 28, 2020 Transfer from Aequs SEZ 1,700,000 Cash 10 41.79 0.28 0.25 Private Limited November 21, 2020 Transfer from Aequs SEZ 2,782,000 Cash 10 26.60 0.45 0.41 Private Limited February 16, 2021 Private placement 30,665,000 Cash 10 26.60 4.97 4.57 March 30, 2021 Private placement 15,917,500 Cash 10 26.60 2.58 2.37 June 24, 2021 Transfer from Aequs SEZ 2,800,000 Cash 10 26.00 0.45 0.42 Private Limited 2,800,000 0.45 0.42 July 29, 2021 Transfer from Aequs SEZ 2,785,800 Cash 10 26.00 0.45 0.42 Private Limited August 14, 2021 Private placement 2,692,499 Cash 10 26.00 0.44 0.40 August 23, 2021 Private placement 7,115,500 Cash 10 26.00 1.15 1.06 October 30, 2021 Transfer from Melligeri 2,923,000 Cash 10 26.00 0.47 0.44 Private Family Foundation Transfer to Vivekanandhan (92,565) Cash 10 26.00 (0.02) (0.01) Maripudi Transfer to Amarnath Gowda (43,922) Cash 10 26.00 (0.01) (0.01) Transfer to Shivshankar (28,940) Cash 10 26.00 Negligible Negligible Sanikop Transfer to Aura Trust** (82,521) Cash 10 26.00 (0.01) (0.01) November 26, 2021 Private placement 11,300,000 Cash 10 26.10 1.83 1.68 128Face No. of Equity value per % of the pre- % of the post- Date of allotment/ Nature of Issue/ acquisition/ transfer Nature of transaction Shares allotted/ Equity Offer Equity Offer Equity transfer consideration price per Equity Share (₹) transferred Share Share c apital Share capital (₹) December 6, 2021 Private placement 54,840,368 Other than cash^ 10 N.A. 8.89 8.18 December 15, 2021 Transfer to Jagadish (620,000) Cash 10 26.10 (0.10) (0.09) Shivaputrappa Melligeri December 22, 2021 Transfer to Jagadish (1,000,000) Cash 10 26.10 (0.16) (0.15) Shivaputrappa Melligeri December 30, 2021 Transfer to Vivekanandhan (1,688,081) Cash 10 26.10 (0.27) (0.25) Maripudi Transfer to Amarnath Gowda (2,011,494) Cash 10 26.10 (0.33) (0.30) Transfer to Siddharth Sawkar (718,390) Cash 10 26.10 (0.12) (0.11) Transfer to Shivshankar (148,832) Cash 10 26.10 (0.02) (0.02) Sanikop Transfer to B A Suresh (316,090) Cash 10 26.10 (0.05) (0.05) January 29, 2022 Transfer to Amgele Family (766,283) Cash 10 26.10 (0.12) (0.11) Private Trust February 12, 2022 Private placement 29,486,590 Cash 10 26.10 4.78 4.40 February 27, 2022 Private placement 7,943,221 Other than cash^^ 10 N.A. 1.29 1.18 August 31, 2022 Transfer to Amit Chakraborty (1,651,924) Other than cash# 10 N.A. (0.27) (0.25) March 12, 2023 Conversion of compulsorily 18,961,938 N.A.$ convertible debentures of face Other than cash(3) 10 4.67 4.29 value of ₹ 100 9,837,838 N.A.$$ August 2, 2024 Transfer from Michael Propen 182,998 Cash 10 12.79 0.03 0.03 August 12, 2024 Transfer from Melligeri 8,169,935 Cash 10 30.60 1.32 1.22 Private Family Foundation May 2, 2025 Rights issue 11,366,365 Cash 10 74.64 1.84 1.69 May 9, 2025 Transfer from Shivshankar 1,651,924 Cash 10 74.64 0.27 0.25 Holdings Transfer from Aequs Mauritius 1,100,000 Cash 10 74.64 0.18 0.16 Stock Incentive Trust May 10, 2025 Transfer from Melligeri 4,500,000 Cash 10 74.64 0.73 0.67 Private Family Foundation Sub-total (B) 290,808,225 47.16 43.36 Melligeri Private Family Foundation December 15, 2011 Further issue 6,432,500 Cash 10 10 1.04 0.96 March 25, 2013 Conversion of loan and 9,216,874 Cash 10 10 1.49 1.37 issuance of Equity Shares (4) May 31, 2013 Transfer to Nirmala Melligeri (15,149,374) Cash 10 10 (2.46) (2.26) 129Face No. of Equity value per % of the pre- % of the post- Date of allotment/ Nature of Issue/ acquisition/ transfer Nature of transaction Shares allotted/ Equity Offer Equity Offer Equity transfer consideration price per Equity Share (₹) transferred Share Share c apital Share capital (₹) February 24, 2021 Transfer from Jagadish 116,876,790 Other than cash## 10 N.A. 18.95 17.43 Shivaputrappa Melligeri October 30, 2021 Transfer to Aequs (2,923,000) Cash 10 26.00 (0.47) (0.44) Manufacturing Investments Private Limited January 29, 2022 Transfer to Raman (22,385) Cash 10 26.10 Negligible Negligible Subramanian July 23, 2022 Transfer from Aequs SEZ 100 Cash 10 28.90 Negligible Negligible Private Limited August 12, 2024 Transfer to Aequs (8,169,935) Cash 10 30.60 (1.32) (1.22) Manufacturing Investments Private Limited May 10, 2025 Transfer to Aequs (4,500,000) Cash 10 74.64 (0.73) (0.67) Manufacturing Investments Private Limited Total (C) 101,761,570 16.50 15.17 Total (A+B+C) 393,569,795 63.82 58.67

(1) Form 7B (share transfer form under the Companies Act, 1956) is not available in the corporate records of our Company. Accordingly, we have relied on the search report dated May 17, 2025, prepared by Prathibha Priya & Associates, Company Secretaries, and the resolution dated October 26, 2007 passed by our Board to record such transfer. For further details, see “Risk Factors – We are unable to trace certain of our historical corporate and secretarial records including forms filed with the RoC. We cannot assure you that regulatory proceedings or actions will not be initiated against us in the future which may impact our financial condition and reputation and we will not be subject to any penalty imposed by the competent regulatory authority in this regard” on page 77.

(2) Form FC-TRS and the approval from the RBI is not available in the corporate records of our Company. While we have relied on the share transfer form and the resolution dated January 28, 2008 passed by our Board to record such transfer, we have requested RBI for a copy of such Form FC-TRS and the subsequent acknowledgment, through the authorized dealer bank of our Company at the time of such transfer, i.e., State Bank of India, vide our letter dated March 17, 2025. For further details, see “Risk Factors – We are unable to trace certain of our historical corporate and secretarial records including forms filed with the RoC. We cannot assure you that regulatory proceedings or actions will not be initiated against us in the future which may impact our financial condition and reputation, and we will not be subject to any penalty imposed by the competent regulatory authority in this regard” on page 77.

(3) Pursuant to the debenture subscription agreements dated (i) July 4, 2022; (ii) August 22, 2022; (iii) October 3, 2022; and (iv) November 9, 2022, AMIPL subscribed to 3,900,000; 1,580,000; 1,562,000; and 1,281,250 compulsorily convertible debentures of our Company, respectively. Upon conversion of such compulsorily convertible debentures, our Company allotted 13,494,810 Equity Shares of face value of ₹ 10; 5,467,128 Equity Shares of face value of ₹ 10; 5,405,405 Equity Shares of face value of ₹ 10; and 4,432,433 Equity Shares of face value of ₹ 10 to AMIPL.

(4) Pursuant to a resolution passed by our Board on December 18, 2012, and consent letter issued by Melligeri Private Family Foundation dated January 1, 2013 , our Company approved the allotment of 9,216,874 Equity Shares to Melligeri Private Family Foundation, upon conversion of outstanding loan together with the interest accrued amounting to ₹ 86,343,740 (as on December 31, 2012) pursuant to the loan agreements dated (i) August 9, 2012; (ii) October 5, 2012; and (iii) November 12, 2012, entered into between Melligeri Private Family Foundation and our Company. Accordingly, out of the total consideration of ₹ 92,168,740, (i) our Company received a consideration of ₹ 5,825,000 in cash from Melligeri Private Family Foundation; and (ii) for the remaining consideration of ₹ 86,343,740, our Company allotted 9,216,874 Equity Shares bearing face value of ₹ 10 each to Melligeri Private Family Foundation, in lieu of the outstanding loan, as consideration other than cash.

*Calculated basis exchange rate of 1 USD = ₹ 68.43, as per www.oanda.com. **Acting through its trustee, Minerva Trust Company Limited. *** Calculated basis exchange rate of 1 USD = ₹ 73.36, as per www. oanda.com.

^ Pursuant to the share purchase agreement dated December 2, 2021, entered into between our Company and AMIPL, our Company allotted 54,840,368 Equity Shares bearing face value of ₹ 10 each to AMIPL as consideration for the purchase of (i) 7,117,373 equity shares of ACPPL; (ii) 32,087,355 equity shares of AFC; and (iii) 92,093,337 equity shares of AEPPL, held by AMIPL, pursuant to share swap arrangement. For 130further details, please see “History and Other Corporate Matters - Details of shareholder agreements - Share purchase agreement dated December 2, 2021, entered into between our Company and Aequs Manufacturing Investments Private Limited” on page 341.

^^ Pursuant to the debenture purchase agreement dated February 25, 2022, entered into among our Company and AMIPL, our Company allotted 7,943,221 Equity Shares to AMIPL as consideration for the purchase of 20,325,300 compulsorily convertible debentures of AFC held by AMIPL.

# Pursuant to a share transaction agreement dated September 22, 2021, AMIPL transferred 1,651,924 Equity Shares to Amit Chakraborty, in consideration of 7,669,080,000 equity shares of AIGF Investments II Private Limited, purchased by AMIPL from Amit Chakraborty.

## Transfer by way of contribution $ The fair market value of the 18,961,938 Equity Shares bearing face value of ₹ 10 each, considered at the time of issuance of the CCDs was ₹ 28.90. $$ The fair market value of the 9,837,838 Equity Shares bearing face value of ₹ 10 each, considered at the time of issuance of the CCDs was ₹ 29.60.

All Equity Shares held by our Promoters were fully paid-up on the respective date of allotment of such Equity Shares.

131(b) Shareholding of our Promoters, the member of the Promoter Group and directors of our Corporate Promoter Except as disclosed below, our Promoters, the members of the Promoter Group and the directors of our Corporate

Promoter do not hold any Equity Shares in our Company:

Name of Shareholder Pre-Offer Post-Offer* No. of Equity Shares % of pre-Offer No. of Equity % of post- Equity Share Shares Offer Equity capital Share capital Promoters Aravind Shivaputrappa 1,000,000 0.16 1,000,000 0.15 Melligeri** Aequs Manufacturing 290,808,225 47.16 290,708,225 43.35 Investments Private Limited Melligeri Private Family 101,761,570 16.50 100,438,070 14.98 Foundation Sub-total (A) 393,569,795 63.82 392,146,295 58.48 Promoter Group Jagadish Shivaputrappa 1,000,000 0.16 1,000,000 0.15 Melligeri Babasaheb Appanna Patil 370,843 0.06 370,843 0.06 Basavant Appanna Patil 228,739 0.04 228,739 0.03 Akkamahadevi Melligeri 798,072 0.13 798,072 0.12 Mayflower Investments 1,397,325 0.23 1,397,325 0.21 LLC Leela B Naikar 78,273 0.01 78,273 0.01 Vijaya Sugandhi 78,273 0.01 78,273 0.01 Venkatesh Shivaputrappa 110,000 0.02 110,000 0.02 Melligeri Sub-total (B) 4,061,525 0.66 4,061,525 0.61 Total (A+B) 397,631,320 64.48 396,207,820 59.09 * Subject to finalisation of Basis of Allotment.

**Also a director of our Corporate Promoter, Aequs Manufacturing Investments Private Limited.

132Secondary Transactions involving the Promoters, Promoter Group and Selling Shareholders Except as disclosed in “– Notes to the Capital Structure – History of build-up of Promoters’ shareholding and lock-in of Promoters’ shareholding – Build-up of Promoters’ shareholding in our Company” on page 127 and as set out below, there has been no acquisition of Equity Shares through secondary transactions by our Promoters, the members of the Promoter Group and the Selling Shareholders, as on the date of this Prospectus.

Face value Transfer No. of Equity Nature of per Equity price per Nature of Date of transfer Shares Name of transferor Name of transferee transaction Share Equity Share consideration transferred (₹) (₹) Promoter Group Jagadish Shivaputrappa Melligeri June 12, 2003(1) (552) Jagadish Shivaputrappa Melligeri Quality Engineering & Software Transfer 10 20.00 Cash Technologies Private Limited May 31, 2013 406,451 QMSEZ Inc. (currently known as Jagadish Shivaputrappa Melligeri Transfer 10 10.00 Cash Aequs Inc.) June 24, 2015 (406,501) Jagadish Shivaputrappa Melligeri Nirmala Melligeri Transfer 10 15.00 Cash March 2, 2018 (21,334) Jagadish Shivaputrappa Melligeri Raman Subramanian Transfer 10 40.21 Cash October 17, 2018 (17,888,879) Jagadish Shivaputrappa Melligeri Anasuya Melligeri Gift 10 Nil N.A.

January 24, 2019 (500,000) Jagadish Shivaputrappa Melligeri Appanna B Patil Transfer 10 41.04 Cash (197,277) Jagadish Shivaputrappa Melligeri Mahantesh Patil Transfer 10 41.04 Cash (36,281) Jagadish Shivaputrappa Melligeri Raman Subramanian Transfer 10 41.04 Cash (39,455) Jagadish Shivaputrappa Melligeri Umesh Yaradal Transfer 10 41.04 Cash (200,000) Jagadish Shivaputrappa Melligeri Nirmala Melligeri Gift 10 Nil N.A.

(14,854,987) Jagadish Shivaputrappa Melligeri Anasuya Melligeri Gift 10 Nil N.A.

February 23, 2021 116,876,790 Anasuya Melligeri Jagadish Shivaputrappa Melligeri Transmission 10 N.A. N.A.

February 24, 2021 (116,876,790) Jagadish Shivaputrappa Melligeri Melligeri Private Family Transfer by way 10 N.A. N.A.

Foundation of contribution December 15, 620,000 Aequs Manufacturing Investments Jagadish Shivaputrappa Melligeri Transfer 10 26.10 Cash 2021 Private Limited December 22, 1,000,000 Aequs Manufacturing Investments Jagadish Shivaputrappa Melligeri Transfer 10 26.10 Cash 2021 Private Limited December 30, (500,000) Jagadish Shivaputrappa Melligeri Aravind Shivaputrappa Melligeri Transfer 10 26.10 Cash 2021 (560,429) Jagadish Shivaputrappa Melligeri Siddharth Sawkar Gift 10 Nil N.A.

(846,868) Jagadish Shivaputrappa Melligeri Meera Sawkar Gift 10 Nil N.A. (1,135,135) Jagadish Shivaputrappa Melligeri Sudha Sawkar Gift 10 Nil N.A. (321,757) Jagadish Shivaputrappa Melligeri Raghu Sawkar Gift 10 Nil N.A.

April 21, 2025 (798,072) Jagadish Shivaputrappa Melligeri Akkamahadevi Melligeri Gift 10 Nil N.A.

Babasaheb Appanna Patil April 23, 2022 500,100 Appanna B Patil Babasaheb Appanna Patil Transmission 10 N.A. N.A.

May 8, 2025 141,174 Aequs Stock Option Plan Trust Babasaheb Appanna Patil Transfer 10 26.27 Cash 133Face value Transfer No. of Equity Nature of per Equity price per Nature of Date of transfer Shares Name of transferor Name of transferee transaction Share Equity Share consideration transferred (₹) (₹) July 28, 2025 78,273 Babasaheb Appanna Patil Vijaya Basavaraj Sugandhi Gift 10 Nil N.A.

78,273 Leela B Naikar Gift 10 Nil N.A.

July 29, 2025 128,739 Babasaheb Appanna Patil Basavant Appanna Patil Gift 10 Nil N.A.

Basavant Appanna Patil May 12, 2025 100,000 Aequs Stock Option Plan Trust Basavant Appanna Patil Transfer 10 26.10 Cash July 29, 2025 128,739 Babasaheb Appanna Patil Basavant Appanna Patil Gift 10 Nil N.A.

Melligeri Investments LLC December 23, Melligeri Family Irrevocable 1,397,325 Melligeri Investments LLC Transfer 10 23.78 Cash 2016 Trust# Melligeri Family Irrevocable Trust# December 23, Melligeri Family Irrevocable 1,397,325 Melligeri Investments LLC Transfer 10 23.78 Cash 2016 Trust# September 24, 1,397,325 Melligeri Family Irrevocable Trust# Mayflower Investments LLC Transfer by way 10 N.A. N.A.

2024 of distribution Mayflower Investments, LLC September 24, 1,397,325 Melligeri Family Irrevocable Trust# Mayflower Investments LLC Transfer by way 10 N.A. N.A.

2024 of distribution Akkamahadevi Melligeri April 21, 2025 798,072 Jagadish Shivaputrappa Melligeri Akkamahadevi Melligeri Gift 10 Nil N.A.

Venkatesh Shivaputrappa Melligeri August 20, 2025 110,000 Nirmala Melligeri Venkatesh Shivaputrappa Gift 10 Nil N.A.

Melligeri Vijaya Basavaraj Sugandhi July 28, 2025 78,273 Babasaheb Appanna Patil Vijaya Basavaraj Sugandhi Gift 10 Nil N.A.

Leela B Naikar July 28, 2025 78,273 Babasaheb Appanna Patil Leela B Naikar Gift 10 Nil N.A.

Individual Selling Shareholders Raman Subramanian March 2, 2018 21,334 Jagadish Shivaputrappa Melligeri Raman Subramanian Transfer 10 40.21 Cash January 24, 2019 36,281 Jagadish Shivaputrappa Melligeri Raman Subramanian Transfer 10 41.04 Cash January 29, 2022 22,385 Melligeri Private Family Foundation Raman Subramanian Transfer 10 26.10 Cash Ravindra K Mariwala November 11, (40,332) Ravindra K Mariwala Aeka Advisors India LLP Transfer 10 123.97 Cash 2025 November 12, Ashika Gowda Global Finance (80,665) Ravindra K Mariwala Transfer 10 123.97 Cash 2025 Limited November 14, Steadview capital Mauritius (274,749) Ravindra K Mariwala Transfer 10 123.97 Cash 2025 limited 134Face value Transfer No. of Equity Nature of per Equity price per Nature of Date of transfer Shares Name of transferor Name of transferee transaction Share Equity Share consideration transferred (₹) (₹) Investor Selling Shareholders Amicus Capital Private Equity I LLP October 16, 2025 (271,045) Amicus Capital Private Equity I LLP Anasuya Hiremath Transfer 10 123.97 Cash October 16, 2025 (161,334) Amicus Capital Private Equity I LLP Muralidhara Chandrasekhara Transfer 10 123.97 Cash Murthy October 24, 2025 (4,009,091) Amicus Capital Private Equity I LLP Think India Opportunities Master Transfer 10 123.97 Cash Fund LP October 27, 2025 (806,647) Amicus Capital Private Equity I LLP Singularity Equity Fund I Transfer 10 123.97 Cash October 28, 2025 (80,667) Amicus Capital Private Equity I LLP Sri Harsha Majety Transfer 10 123.97 Cash November 10, (806,647) Amicus Capital Private Equity I LLP Ashoka India Equity Investment Transfer 10 123.97 Cash 2025 Trust PLC November 10, (458,167) Amicus Capital Private Equity I LLP DSP Investment Private Limited Transfer 10 123.97 Cash 2025 November 11, (733,979) Amicus Capital Private Equity I LLP Whiteoak Capital India Transfer 10 123.97 Cash 2025 Opportunities Fund Amicus Capital Partners India Fund I October 13, 2025 (40,333) Amicus Capital Partners India Fund I Manjunath Denkanikotta Transfer 10 123.97 Cash Chenneerappa October 17, 2025 (14,100) Amicus Capital Partners India Fund I Madhukesh Basavaraj Naikar Transfer 10 123.97 Cash October 17, 2025 (9,680) Amicus Capital Partners India Fund I Priti Basavant Patil Transfer 10 123.97 Cash October 17, 2025 (25,006) Amicus Capital Partners India Fund I Pushpa Basavaraj Patil Transfer 10 123.97 Cash October 17, 2025 (27,845) Amicus Capital Partners India Fund I N S Pushpalatha Transfer 10 123.97 Cash October 17, 2025 (29,245) Amicus Capital Partners India Fund I Mallikarjun Siddagouda Patil Transfer 10 123.97 Cash October 24, 2025 (7,399) Amicus Capital Partners India Fund I Sanjay Dharma Singh Transfer 10 123.97 Cash October 27, 2025 (98,913) Amicus Capital Partners India Fund I Radhika Rajan Transfer 10 123.97 Cash November 6, 2025 (16,132) Amicus Capital Partners India Fund I Amitabh Pandey Transfer 10 123.97 Cash November 6, 2025 (12,100) Amicus Capital Partners India Fund I Anand Desai Transfer 10 123.97 Cash November 6, 2025 (102,626) Amicus Capital Partners India Fund I NovaaOne Capital Private Transfer 10 123.97 Cash Limited November 10, (249,569) Amicus Capital Partners India Fund I DSP Investment Private Limited Transfer 10 123.97 Cash 2025 November 11, (93,841) Amicus Capital Partners India Fund I Whiteoak Capital India Transfer 10 123.97 Cash 2025 Opportunities Fund November 13, (12,100) Amicus Capital Partners India Fund I Steadview Capital Mauritius Transfer 10 123.97 Cash 2025 Limited Amicus Capital Partners India Fund II October 16, 2025 (403,334) Amicus Capital Partners India Fund II Kenai Advisors LLP Transfer 10 123.97 Cash October 16, 2025 (51,623) Amicus Capital Partners India Fund II Anasuya Hiremath Transfer 10 123.97 Cash 135Face value Transfer No. of Equity Nature of per Equity price per Nature of Date of transfer Shares Name of transferor Name of transferee transaction Share Equity Share consideration transferred (₹) (₹) October 16, 2025 (403,334) Amicus Capital Partners India Fund II George Mathew Transfer 10 123.97 Cash October 16, 2025 (80,667) Amicus Capital Partners India Fund II Madhava Rao Kilaru Transfer 10 123.97 Cash October 16, 2025 (161,334) Amicus Capital Partners India Fund II Saurabh Gupta Transfer 10 123.97 Cash October 23, 2025 (403,334) Amicus Capital Partners India Fund II Gradis Trading Private Limited Transfer 10 123.97 Cash October 24, 2025 (20,166) Amicus Capital Partners India Fund II Mahabalappa Niranjana Transfer 10 123.97 Cash October 24, 2025 (40,332) Amicus Capital Partners India Fund II G V Nagabrahma Transfer 10 123.97 Cash October 24, 2025 (32,933) Amicus Capital Partners India Fund II Sanjay Dharma Singh Transfer 10 123.97 Cash October 24, 2025 (20,166) Amicus Capital Partners India Fund II Reema Gupta Transfer 10 123.97 Cash October 24, 2025 (52,432) Amicus Capital Partners India Fund II Appareddy Harish Transfer 10 123.97 Cash October 27, 2025 (20,166) Amicus Capital Partners India Fund II Vikram Gupta Transfer 10 123.97 Cash October 27, 2025 (62,415) Amicus Capital Partners India Fund II Radhika Rajan Transfer 10 123.97 Cash October 27, 2025 (27,228) Amicus Capital Partners India Fund II N S Pushpalatha Transfer 10 123.97 Cash October 30, 2025 (1,209,970) Amicus Capital Partners India Fund II DSP Investment Private Limited Transfer 10 123.97 Cash November 6, 2025 (20,500) Amicus Capital Partners India Fund II Kondamarri N B Prasad Transfer 10 123.97 Cash November 6, 2025 (58,703) Amicus Capital Partners India Fund II NovaaOne Capital Private Transfer 10 123.97 Cash Limited November 10, (502,233) Amicus Capital Partners India Fund II DSP Investment Private Limited Transfer 10 123.97 Cash 2025 November 11, (382,149) Amicus Capital Partners India Fund II Whiteoak Capital India Transfer 10 123.97 Cash 2025 Opportunities Fund November 12, (20,166) Amicus Capital Partners India Fund II Salonee Dronawat Transfer 10 123.97 Cash 2025 November 13, (60,048) Amicus Capital Partners India Fund II Steadview Capital Mauritius Transfer 10 123.97 Cash 2025 Limited Girija Dempo Family Private Trust November 13, (197,874) Girija Dempo Family Private Trust Steadview Capital Mauritius Transfer 10 123.97 Cash 2025 limited Vasundhara Dempo Family Private Trust November 13, (197,874) Girija Dempo Family Private Trust Steadview Capital Mauritius Transfer 10 123.97 Cash 2025 limited

(1) Form 7B (share transfer form under the Companies Act, 1956) is not available within the corporate records of our Company. Accordingly, we have relied on the search report dated May 17, 2025, prepared by Prathibha Priya & Associates, Company Secretaries, and resolution dated June 12, 2003 passed by our Board to record such transfer. For further details see “Risk Factors – We are unable to trace certain of our historical corporate and secretarial records including forms filed with the RoC. We cannot assure you that regulatory proceedings or actions will not be initiated against us in the future which may impact our financial condition and reputation and we will not be subject to any penalty imposed by the competent regulatory authority in this regard” on page 77.

# Acting through its trustee, B A Suresh.

1365. Lock-in requirements

(a) Details of Promoters’ Contribution and lock-in Pursuant to Regulation 14 and Regulation 16(1)(a) of the SEBI ICDR Regulations, an aggregate of 20% of the fully diluted post-Offer Equity Share capital of our Company held by our Promoters shall be considered as minimum promoters’ contribution and locked-in for a period of three years from the date of Allotment (“Promoters’ Contribution”). Our Promoters’ shareholding in excess of 20% of the fully diluted post-Offer Equity Share capital shall be locked in for a period of one year from the date of Allotment.

The details of the Equity Shares held by our Promoters, which shall be locked-in for a period of three years, from the date of Allotment as Promoters’ Contribution are set forth

below:

Name of the Promoter Number of Equity Date of allotment/ Nature of Face value per Issue/ Acquisition Percentage of pre- Percentage of post- Date up to which Shares locked-in transfer/ transaction Equity Share (₹) price per Equity Offer paid-up Offer paid-up the Equity Shares acquisition Share (₹) Equity Share Equity Share are subject to lock capital capital in Aequs Manufacturing Investments 8,816,915 March 1, 2016 Rights issue 10 23.78 1.43 1.31 December 8, 2028 Private L imited 1,910,526 March 30, 2016 Private placement 10 23.78 0.31 0.28 6,629,900 March 14, 2017 Private placement 10 23.78 1.08 0.99 1,945,350 March 17, 2017 Private placement 10 23.78 0.32 0.29 51,076 October 9, 2017 Private placement 10 40.21 0.01 0.01 648,936 December 5, 2018 Private placement 10 41.04 0.11 0.10 6,825,000 December 10, 2018 Private placement 10 41.04 1.11 1.02 1,606,828 October 26, 2019 Private placement 10 41.42 0.26 0.24 1,700,000 February 28, 2020 Transfer from Aequs 10 41.79 0.28 0.25 SEZ Private Limited 2,782,000 November 21, 2020 Transfer from Aequs 10 26.60 0.45 0.41 SEZ Private Limited 30,665,000 February 16, 2021 Private placement 10 26.60 4.97 4.57 15,917,500 March 30, 2021 Private placement 10 26.60 2.58 2.37 2,800,000 June 24, 2021 Transfer from Aequs 10 26.00 0.45 0.42 SEZ Private Limited 2,800,000 June 24, 2021 Transfer from Aequs 10 26.00 0.45 0.42 SEZ Private Limited 2,785,800 July 29, 2021 Transfer from Aequs 10 26.00 0.45 0.42 SEZ Private Limited 2,692,499 August 14, 2021 Private placement 10 26.00 0.44 0.40 7,115,500 August 23, 2021 Private placement 10 26.00 1.15 1.06 2,923,000 October 30, 2021 Transfer from 10 26.00 0.47 0.44 Melligeri Private Family Foundation 4,030,830 November 26, 2021 Private placement 10 26.10 0.65 0.60 29,486,590 February 12, 2022 Private placement 10 26.10 4.78 4.40 Total 134,133,250 21.75 20.00 137Our Promoters have given their consent to include such number of Equity Shares held by them as may constitute 20% of the fully diluted post-Offer Equity Share capital of our Company as the Promoters’ Contribution. Our Promoters have agreed not to dispose, sell, transfer, charge, pledge or otherwise encumber in any manner, the Promoters’ Contribution from the date of filing of this Prospectus, until the expiry of the lock-in period specified above, or for such other time as required under SEBI ICDR Regulations, except as may be permitted, in accordance with the SEBI ICDR Regulations. Our Company undertakes that the Equity Shares that are being locked-in are not ineligible for computation of Promoters’ Contribution in terms of Regulation 15 of the SEBI ICDR Regulations. For details of the build-up of the share capital held by our Promoters, see “– Notes to the Capital Structure – History of build-up of Promoters’ shareholding and lock-in of Promoters’ shareholding – Build-up of Promoters’ shareholding in our Company” on page 127.

In this connection, we confirm the following:

(i) the Equity Shares offered for Promoters’ Contribution do not include Equity Shares acquired in the three

immediately preceding years: (a) for consideration other than cash and revaluation of assets or capitalisation of intangible assets; or (b) resulting from bonus issue by utilisation of revaluation reserves or unrealised profits of our Company or resulted from bonus issue against Equity Shares which are otherwise ineligible for computation of Promoters’ Contribution;

(ii) the Promoters’ Contribution does not include any Equity Shares acquired during the immediately preceding year at a price lower than the price at which the Equity Shares are being offered to the public in the Offer;

(iii) our Company has not been formed by the conversion of a partnership firm or a limited liability partnership firm into a company;

(iv) the Equity Shares forming part of the Promoters’ Contribution are not subject to any pledge with any creditor; and

(v) all the Equity Shares held by our Promoters are held in dematerialised form.

(b) Details of Equity Shares locked-in for six months In terms of Regulation 17 of the SEBI ICDR Regulations, the entire pre-Offer equity share capital held by persons other than our Promoters, will be locked-in for a period of six months from the date of Allotment, except for:

(i) the Promoters’ Contribution and any Equity Shares held by our Promoters in excess of the Promoters’ Contribution, which shall be locked in as above;

(ii) any Equity Shares allotted to employees, whether currently an employee or not, pursuant to any employee stock option schemes prior to the Offer;

(iii) Equity Shares held by an employee stock option trust or transferred to the employees by an employee stock option trust pursuant to exercise of options by the employees, whether currently employees or not, in accordance with the employee stock option plan or employee stock purchase scheme; and

(iv) Equity Shares held by a VCF or Category I AIF or Category II AIF or FVCI.

In terms of Regulation 17(c) of the SEBI ICDR Regulations, Equity Shares held by a VCF or Category I AIF or Category II AIF or FVCI shall not be locked-in for a period of six months from the date of Allotment, provided that such Equity Shares shall be locked in for a period of at least six months from the date of purchase by such shareholders, subject to the provisions of Regulation 8A(c) of the SEBI ICDR Regulations. In accordance with Regulation 8A(c) of the SEBI ICDR Regulations, for Shareholders holding (individually or with persons acting in concert) more than 20% of pre-Offer shareholding of our Company on a fully diluted basis, the provisions of lock-in as specified under Regulation 17 of the SEBI ICDR Regulations shall be applicable, and relaxation from lock-in as provided under Regulation 17(c) of the SEBI ICDR Regulations is not applicable. In this regard, other than the Equity Shares held by Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II, Catamaran Ekam, and Whiteoak Capital India Opportunities Fund, which are SEBI registered AIFs of category II in accordance with Regulation 17(c) of the SEBI ICDR Regulations, the entire pre-Offer Equity Share capital of our Company, shall, unless otherwise permitted under the SEBI ICDR Regulations, be locked-in for a period of six months from the date of Allotment in the Offer.

(c) Lock-in of Equity Shares Allotted to Anchor Investors 50% of the Equity Shares Allotted to Anchor Investors in the Anchor Investor Portion shall be locked in for a period of 90 days from the date of Allotment and the remaining 50% of the Equity Shares Allotted to Anchor Investors in the Anchor Investor Portion shall be locked in for a period of 30 days from the date of Allotment.

138(d) Other requirements in respect of lock-in As required under Regulation 20 of the SEBI ICDR Regulations, our Company shall ensure that the details of the Equity Shares locked-in are recorded by the relevant Depository. The Equity Shares held by our Promoters, which are locked-in, may be pledged only with scheduled commercial banks or public financial institutions or NBFC- SIs or housing finance companies, as collateral security for loans granted by such banks or public financial institutions or Systemically Important NBFCs or housing finance companies in terms of Regulation 21 of the SEBI ICDR Regulations. In terms of Regulation 21(a) of the SEBI ICDR Regulations, the Equity Shares held by our Promoters which are locked-in for a period of three years from the date of Allotment may be pledged only with the entities mentioned above, provided that such loans have been granted for the purpose of financing one or more of the objects of the Offer and pledge of the Equity Shares is a term of sanction of such loans. Further, pursuant to Regulation 21(b) of the SEBI ICDR Regulations, the Equity Shares held by our Promoters, which are locked-in for a period of one year from the date of Allotment, may be pledged only with the entities mentioned above, provided that such pledge of the Equity Shares is one of the terms of the sanction of such loans. However, the relevant lock-in period shall continue post the invocation of the pledge referenced above, and the relevant transferee shall not be eligible to transfer the Equity Shares till the relevant lock-in period has expired in terms of the SEBI ICDR Regulations.

In terms of Regulation 22 of the SEBI ICDR Regulations, Equity Shares held by our Promoters which are lock- in for a period of one year may be transferred amongst our Promoters or any member of the Promoter Group or to any new promoter, subject to continuation of lock-in in the hands of the transferees for the remaining period and in compliance with the provisions of the Takeover Regulations, as applicable and such transferee shall not be eligible to transfer them till the lock-in period stipulated in SEBI ICDR Regulations has expired. The Equity Shares held by persons other than our Promoters prior to the Offer and locked-in for a period of six months may be transferred to any other person holding Equity Shares which are locked-in along with the Equity Shares proposed to be transferred, subject to the continuation of the applicable lock-in and the transferee being ineligible to transfer such Equity Shares until expiry of the lock-in period, and in compliance with the provisions of the Takeover Regulations.

1396. Our shareholding pattern

Set forth below is the shareholding pattern of our Company as on the date of this Prospectus:

Catego Category No. of No. of fully No. No. of Total no. Shareh No. of voting rights held in each class of No. of Total No of Shareholdi Number of Number Non- Other Total Number of ry (I) of the Sharehol paid-up of share shares held olding securities (IX) equity shares on ng as a % locked in of shares disposal encumbranumber equity Sharehol ders Equity pa s (VII) = as a % shares fully assuming shares pledged undertaki nces, of shares shares held der (II) (III) Shares held rtl under (IV)+(V)+ of total underlyi diluted full (XIII) or ng if any encumbein

(IV) y lying (VI) no. of ng basis conversion otherwise (XV) (XVI) red demateriali pai depos shares outstand (including of encumbe (XVII) = zed form warrants, d- itory (calcula ing convertible red (XIV) (XIII+XI(XVIII) ESOP, up receip ted as converti securities V+XV+X Convertibl Eq ts per ble e (as a % of VI) uit (VI) SCRR, securitie Securities diluted y 1957) No. of voting rights Tota s etc.) share N As a No. As a N As a No. As a No. As a Sh As a % l as (includin (XI)=(VII+X) capital o. % of (a) % of o. % of (a) % of (a) % of are of a % g (XII)=(VII) (a total total (a total total total s (A+B+ of warrants + (X) as a ) shar shar ) shar shar shar hel C2) total , % of es es es es es d (VIII) voti employe (A+B+C2)) held held held held held

(V) ng e stock (b) (b) (b) (b) (b)

Class eg: Cl Total righ options equity as ts etc.) (X) shares s eg : ot he rs Promoter 11 397,631,320 - - 397,631,32 64.48 397,631,32 - 397,631,32 64.4 - 397,631,320 64.48 - - - - - - - - - - 397,631,32 s and 0 0 0 8 0

(A) Promoter Group# Public 130 203,174,857 - - 203,174,85 32.95 203,174,85 - 203,174,85 32.9 - 203,174,857 32.95 - - - - - - - - - - 203,174,85

(B) 7 7 7 5 7 Non- - - - - - - - - - - - - - - - - - - - - - - - - Promoter

(C) -Non Public Shares - - - - - - - - - - - - - - - - - - - - - - - - underlyi ng Custodia

(1) n/ Deposito ry Receipts Shares 1 15,811,500 - - 15,811,500 2.57 15,811,500 - 15,811,500 2.57 - 15,811,500 2.57 - - - - - - - - - - 15,811,500 held by

(2) Employe e Trust Total 142 616,617,677 - - 616,617,67 100.00 616,617,67 - 616,617,67 100. - 616,617,677 100.00 - - - - - - - - - - 616,617,67

(A)+(B)+ 7 7 7 00 7

(C)

1407. Shareholding of our Directors, Key Managerial Personnel and Senior Management in our Company Except as stated below, none of our Directors, Key Managerial Personnel or Senior Management hold any Equity

Shares in our Company:

Granted options Vested options (not Name of the Number of Equity Number of Equity (not vested as on the exercised) as on the Director/ Key Shares of face Shares held as a % of date of this date of this Managerial Personnel/ value of ₹ 10 each the pre-Offer Equity Prospectus)# Prospectus Senior Management held Share capital Directors Aravind Shivaputrappa 1,000,000 Nil Nil 0.16 Melligeri* Rajeev Kaul 562,365 1,000,648 431,362 0.09 Ajay Aravind Prabhu 145,000 Nil 155,000 0.02 Eberhard Klaus Richter 200,000 Nil Nil 0.03 Key Managerial Personnel Dinesh Venkatachalam 100,000 575,000 75,000 0.02 Iyer Ravi Mallikarjun Hugar 80,000 94,116 125,384 0.01 Senior Management Ravi Guttal 75,000 175,000 Nil 0.01 Kapil Mahajan Nil 250,000 Nil Nil Mohamed Bouzidi Nil 1,125,000 625,000 Nil *Also a director of our Corporate Promoter, Aequs Manufacturing Investments Private Limited # Excludes exercised options

8. Details of shareholding of the major Shareholders of our Company

(a) As on the date of this Prospectus, our Company has 142 Shareholders. Further, our Company is in compliance with Section 67(3) of the Companies Act 1956 and Section 25 of the Companies Act 2013, as applicable, and has not had more than 49 or 200 shareholders in any financial year since incorporation.

(b) Set forth below are details of the Shareholders holding 1% or more of the paid-up share capital of our

Company as on the date of this Prospectus:

S. No. Name of the Shareholder Number of Equity Shares Percentage of the pre-Offer Equity Share capital

(i) Aequs Manufacturing Investments 290,808,225 47.16% Private Limited

(ii) Melligeri Private Family 101,761,570 16.50% Foundation^

(iii) Amansa Investments Limited 50,132,863 8.13%

(iv) Steadview Capital Mauritius Limited 22,820,619 3.70%

(v) Amicus Capital Partners India Fund 21,793,063 3.53% II

(vi) Catamaran Ekam# 19,005,748 3.08%

(vii) Aequs Stock Option Plan Trust 15,811,500 2.56%

(viii) Sparta Group LLC 15,750,380 2.55%

(ix) Amicus Capital Private Equity I LLP 12,418,403 2.01% Total 550,302,371 89.22% ^ Acting through its trustee, MTSPL. #Acting through its trustee, Catamaran Advisors LLP.

(c) Set forth below are details of the Shareholders holding 1% or more of the paid-up share capital of our Company as of 10 days prior to the date of this Prospectus:

S. No. Name of the Shareholder Number of Equity Shares Percentage of the pre-Offer Equity Share capital

(i) Aequs Manufacturing Investments 290,808,225 47.16% Private Limited

(ii) Melligeri Private Family 101,761,570 16.50% Foundation^

(iii) Amansa Investments Limited 50,132,863 8.13% 141S. No. Name of the Shareholder Number of Equity Shares Percentage of the pre-Offer Equity Share capital

(iv) Steadview Capital Mauritius 22,820,619 3.70% Limited

(v) Amicus Capital Partners India 21,793,063 3.53% Fund II

(vi) Catamaran Ekam# 19,005,748 3.08%

(vii) Aequs Stock Option Plan Trust 15,811,500 2.56%

(viii) Sparta Group LLC 15,750,380 2.55%

(ix) Amicus Capital Private Equity I 12,418,403 2.01% LLP Total 550,302,371 89.22% ^ Acting through its trustee, MTSPL. #Acting through its trustee, Catamaran Advisors LLP.

(d) Set forth below are details of the Shareholders holding 1% or more of the paid-up share capital of our

Company as of one year prior to the date of this Prospectus:

Percentage of Number of the pre-Offer % of the pre- S. Number of Equity Equity Share Name of the Shareholder Offer Equity No. Equity Shares Shares on a fully capital on a Share capital diluted basis* fully diluted basis (%)*

(i) Aequs Manufacturing 272,189,936 64.08% 272,189,936 46.78% Investments Private Limited

(ii) Melligeri Private Family 106,261,570 25.02% 106,261,570 18.26% Foundation^

(iii) Aequs Stock Option Plan 14,400,000 3.39% 14,400,000 2.47% Trust

(iv) Amansa Investments Limited 350 Negligible 48,235,541 8.29%

(v) Amicus Capital Partners Negligible 200 25,081,268 4.31% India Fund II

(vi) Steadview Capital Mauritius Negligible 200 20,426,275 3.51% Limited

(vii) Amicus Capital Private Negligible 135 19,745,980 3.39% Equity I LLP

(viii) Catamaran Ekam# 50 Negligible 18,457,477 3.17%

(ix) Sparta Group LLC 137 Negligible 15,750,380 2.71% Total 392,852,578 92.49% 540,548,427 92.89% * Equity Share capital on a fully diluted basis has been computed assuming conversion of outstanding CCPS (as on that date) into Equity Shares in the ratio of 2.6318 and 2.5750, as applicable.

^ Acting through its trustee, MTSPL. #Acting through its trustee, Catamaran Advisors LLP.

(e) Set forth below are details of the Shareholders holding 1% or more of the paid-up share capital of our

Company as of two years prior to the date of this Prospectus:

Percentage of Number of the pre-Offer S. % of the pre- Number of Equity Equity Share No Name of the Shareholder Offer Equity Equity Shares Shares on a fully capital on a . Share capital diluted basis* fully diluted basis (%)*

(i) Aequs Manufacturing 263,837,003 62.11% 263,837,003 45.35% Investments Private Limited

(ii) Melligeri Private Family 114,431,505 26.94% 114,431,505 19.67% Foundation^

(iii) Amansa Investments Limited 350 Negligible 48,235,541 8.29%

(iv) Amicus Capital Partners India 200 Negligible 25,081,268 4.31% Fund II

(v) Steadview Capital Mauritius 200 Negligible 20,426,275 3.51% Limited

(vi) Amicus Capital Private Equity I 135 Negligible 19,745,980 3.39% LLP

(vii) Catamaran Ekam 50 Negligible 18,457,477 3.17% 142Percentage of Number of the pre-Offer S. % of the pre- Number of Equity Equity Share No Name of the Shareholder Offer Equity Equity Shares Shares on a fully capital on a . Share capital diluted basis* fully diluted basis (%)*

(viii) Sparta Group LLC 137 Negligible 15,750,380 2.71%

(ix) Aequs Stock Option Plan Trust 14,400,000 3.39% 14,400,000 2.47% Total 392,669,580 92.45% 540,365,429 92.87% *Equity Share capital on a fully diluted basis has been computed assuming conversion of outstanding CCPS (as on that date) into Equity Shares in the ratio of 2.6318 and 2.5750, as applicable.

^ Acting through its trustee, MTSPL.

Employee Stock Option Scheme Our Company has adopted the ‘Aequs Employee Stock Option Plan 2025’ (“ESOP Plan 2025”) pursuant to the resolution passed by our Board on May 10, 2025, and the resolution passed by the Shareholders on May 13, 2025, which is administered through an employee stock option trust (the “Aequs Stock Option Plan Trust”). The purpose of ESOP Plan 2025 is to retain and attract key talent, create wealth opportunities for employees of the Company and its Subsidiaries. Further, one of the objectives of the ESOP Plan 2025 is to subsume the previous employee stock option plans of the Company, thereby consolidating them into the ESOP Plan 2025. In this regard,

all options granted under the previous employee stock option plans: (i) which have been vested but not exercised; and (ii) unvested options, were transferred to the ESOP Plan 2025.

The ESOP Plan 2025 is in compliance with the SEBI SBEB & SE Regulations and has been certified by BMP & Co, Practising Company Secretary, having firm registration number L2017KR003200, pursuant to its certificate dated December 5, 2025. All grants made pursuant to the ESOP Plan 2025 have been in compliance with the Companies Act 2013. Further, the allotment of Equity Shares pursuant to exercise of options granted and vested under the ESOP Plan 2025 have been made to eligible employees.

The following table sets forth the particulars of the ESOP Plan 2025, including options granted during the periods mentioned below, and as on the date of this Prospectus:

For the period October For the Financial Financial Financial 1, 2025 till the date of period Year Year ended Year ended Particulars this Prospectus ended ended March 31, March 31, September March 31, 2025 2023 30, 2025 2024 Options granted 815,000 2,400,000 3,043,821 - 275,000 Options vested (net of forfeited/ lapsed/ 2,266,827 cancelled/ exercised options) 2,290,827 3,443,759 3,805,977 4,125,157 Options exercised 24,000 1,966,813 1,173,719 10,000 7,000 Options forfeited/ lapsed/ cancelled 527,000 595,000 641,000 2,165,563 670,938 Options outstanding (including vested and 10,577,767 unvested options) 10,313,766 10,475,579 9,246,477 11,422,040 Exercise price of options (in ₹) (For the ₹74.64 ₹74.64 ₹30.6 Nil ₹28.90- options granted during the year/ period) ₹29.60

(Range) Total number of Equity Shares that would 10,577,767 10,313,766 10,475,579 9,246,477 11,422,040 arise as a result of full exercise of options granted (net of forfeited/ lapsed/ cancelled options) (vested and unvested options) Variation in terms of options NA NA NA NA NA Money realized by exercise of options (in ₹ 598,350 43,489,386 22,113,566 237,800 166,460 million) Total number of options in force (vested and 10,577,767 10,313,766 10,475,579 9,246,477 11,422,040 unvested options) Employee wise details of options granted to Key Managerial Personnel - Ajay Aravind Prabhu - - 100,000 - - - Dinesh Venkatachalam Iyer - - 250,000 - - - Eberhard Klaus Richter - - - - - - Ravi Mallikarjun Hugar - - 26,975 - - - Rajeev Kaul - - 334,053 - - Senior Management - Mohamed Bouzidi - 500,000 - - - - Kapil Mahajan - 250,000 - - Ravi Guttal - - - - - 143For the period October For the Financial Financial Financial 1, 2025 till the date of period Year Year ended Year ended Particulars this Prospectus ended ended March 31, March 31, September March 31, 2025 2023 30, 2025 2024 Any other employee who received a grant in any one year of options amounting to 5% or more of the options granted during the year - Nayana Wali - 500,000 - - - - Aravinth Krishnamurthy - - - - 100,000 - Dr. Praveen kumar Nayak - - - - 50,000 - Maharajan Sankaran - - - - 50,000 - Nagaraj Koppal - - - - 50,000 - Aniket Gudup - - - - 25,000 - Amit Melligeri - - 250,000 - - Identified employees who are granted options, during any one year equal to or exceeding 1% of the issued capital (excluding outstanding warrants and conversions) of our Company at the time of grant Fully diluted EPS on a pre- Offer basis pursuant to the issue of Equity Shares on NA exercise of options calculated in accordance (0.30) (1.80) (0.16) (2.42) with the applicable accounting standard on ‘Earnings per Share’ (in ₹) for continuing and discontinued operations Difference between employee compensation Not Applicable. As per the Restated Consolidated Financial Statements, the fair value cost calculated using the intrinsic value of has been determined as per Black Scholes Model of valuation.

stock options and the employee compensation cost that shall have been recognised if the Company had used fair value of options and impact of this difference on profits and EPS of the Company The fair value of the employee stock options has been measured using the Black-Scholes formula. The inputs used in the measurement of the fair values at grant date of the equity- settled share-based payment plans are as follows.

September March March 31, March 30,2025 31, 2025 2024 31, 2023 Fair value at grant date 47.64-52.20 13.76- Not 7 - 12.50 Description of the pricing formula and the 15.38 applicable method and significant assumptions used Share price at grant date 105.00 30.60 22.40 - during the year to estimate the fair values of 28.90 options, including weighted-average Exercise price 74.64 30.60 28.90 - information, namely, risk-free interest rate, 29.60 expected life, expected volatility, expected Expected volatility 12.41%- 16.38- 21.36 - dividends and the price of the underlying (weighted-average) 18.97% 17.22% 21.50% share in market at the time of grant of the Expected life 2.50-6.50 8.50 - 8.24 - option (weighted-average) 9.50 8.75

(years) Expected dividends 0% 0% 0% Risk-free interest rate 5.82%-6.23% 6.63 - 7 - 7.2% (based on government 7.03% securities) (This has been extracted from the disclosures in the Restated Consolidated Financial information) Impact on profits and EPS of the last three Not Applicable years if the Company had followed the accounting policies specified in the SEBI SBEB & SE Regulations in respect of options granted in the last three years Intention of the Key Managerial Personnel, Except Dinesh Venkatachalam Iyer and Ravi Mallikarjun Hugar, no other KMP or Senior Senior Management and whole-time directors Management intend to sell Equity Shares allotted upon exercise of options granted under who are holders of Equity Shares allotted on ESOP Plan 2025 within three months after the date of listing of the Equity Shares in the exercise of options granted under an employee Offer.

stock option scheme or allotted under an employee stock purchase scheme, to sell their Equity Shares within three months after the date of listing of the Equity Shares in the Offer (aggregate number of Equity Shares intended to be sold by the holders of options), if any 144For the period October For the Financial Financial Financial 1, 2025 till the date of period Year Year ended Year ended Particulars this Prospectus ended ended March 31, March 31, September March 31, 2025 2023 30, 2025 2024 Intention to sell Equity Shares arising out of Nil an employee stock option scheme or allotted under an employee stock purchase scheme within three months after the date of listing, by Directors, senior managerial personnel and employees having Equity Shares issued under an employee stock option scheme or employee stock purchase scheme amounting to more than 1% of the issued capital (excluding outstanding warrants and conversions) of the Company

Note: As certified by Manian & Rao, Chartered Accountants (FRN No. 001983S), by way of their certificate dated December 5, 2025.

The particulars of Equity Shares issued under the ESOP Plan 2025, aggregating quarter wise, indicating the aggregate number of Equity Shares issued and the price range within which equity shares have been issued in

each quarter are as below:

Aggregate number of Equity Shares Price at which each Equity Share was issued pursuant to exercise of vested Quarter ended issued (₹) employee stock options granted under

(Range) ESOP Plan 2025 Q1 FY 2023 7,000 23.78 Q2 FY 2023 - - Q3 FY 2023 - - Q4 FY 2023 - - Q1 FY 2024 - - Q2 FY 2024 10,000 23.78 Q3 FY 2024 - - Q4 FY 2024 - - Q1 FY 2025 - - Q2 FY 2025 - - Q3 FY 2025 - - Q4 FY 2025 1,173,719 10-40.39 Q1 FY 2026 1,331,031 10-40.39 Q2 FY 2026 635,782 10-40.39 Q3 FY 2026 (until the date of this RHP) 1,966,813 10-40.39

9. There have been no financing arrangements whereby our Promoters, member of the Promoter Group, directors of our Corporate Promoter, our Directors or any of their Relatives have financed the purchase by any other person of securities of our Company other than in the normal course of business of the financing entity during the six months immediately preceding the date of filing of the Red Herring Prospectus and this Prospectus.

10. Our Company, our Directors and the BRLMs have not entered into any buy-back or any other arrangements for purchase of Equity Shares.

11. As on the date of this Prospectus, the BRLMs and their respective associates (as defined in the SEBI Merchant Bankers Regulations) do not hold any Equity Shares. The BRLMs and their respective associates and affiliates in their capacity as principals or agents may engage in transactions with, and perform services for, our Company and its respective directors and officers, partners, trustees, affiliates, associates or third parties in the ordinary course of business and have engaged, or may in the future engage, in commercial banking and investment banking transactions with our Company and each of its respective directors and officers, partners, trustees, affiliates, associates or third parties, for which they have received, and may in the future receive, compensation.

12. All issuances of Equity Shares and CCPS by our Company from the date of incorporation of our Company till the date of filing of this Prospectus have been made in compliance with Companies Act

2013. The Equity Shares are fully paid-up and there are no partly paid-up Equity Shares as on the date of this Prospectus. The Equity Shares issued and transferred pursuant to the Offer shall be fully paid-up at the time of Allotment.

14513. As on the date of this Prospectus, other than the options to be granted in terms of the ESOP Plan 2025, our Company has no outstanding warrants, options to be issued Equity Shares or rights to convert debentures, loans or other convertible instruments into Equity Shares.

14. No person connected with the Offer, including our Company, the BRLMs, the Member of the Syndicate, our Promoters, member of the Promoter Group, or our Directors, shall offer any incentive, whether direct or indirect, in any manner, whether in cash or kind or services or otherwise to any Bidder for making a Bid, except for fees or commission for services rendered in relation to the Offer.

15. There will be no further issue of Equity Shares whether by way of issue of bonus shares, preferential allotment, rights issue or in any other manner during the period commencing from the date of receipt of observations from the SEBI on this Prospectus with SEBI until the Equity Shares have been listed on the Stock Exchanges or all application monies have been refunded, as the case may be, other than in

connection with: (i) the Offer; and (ii) any allotments made to the Aequs Stock Option Plan Trust, pursuant to the ESOP Plan 2025.

16. Except as disclosed under “Notes to the Capital Structure – History of Equity Share capital of our Company” and “Notes to the Capital Structure – History of build-up of Promoters’ shareholding and lock-in of Promoters’ shareholding - Build-up of Promoters’ shareholding in our Company” on pages 116 and 127, our Promoters, the directors of our Corporate Promoter, any member of the Promoter Group, our Directors, or their Relatives have not purchased or sold any securities of our Company during the period of six months immediately preceding the date of this Prospectus.

17. Except for the allotment, if any, made to the Aequs Stock Option Plan Trust, pursuant to the ESOP Plan 2025, and issuance of Equity Shares, pursuant to the Offer, our Company presently does not intend or propose and is not under negotiations or considerations to alter the capital structure for a period of six months from the Bid/Offer Opening Date, by way of split or consolidation of the denomination of Equity Shares, or further issue of Equity Shares (including issue of securities convertible into or exchangeable for, directly or indirectly into Equity Shares), whether on a preferential basis or by issue of bonus or rights or further public issue of Equity Shares.

18. Our Company does not have any outstanding CCPS or existing compulsorily convertible debentures as on the date of this Prospectus.

19. Our Company has ensured that transactions in securities by our Promoters and the members of the Promoter Group during the period between the date of filing of the Updated Draft Red Herring Prospectus - I and the date of closure of the Offer have been reported to the Stock Exchanges within 24 hours of such transaction.

20. Our Company has reported the details of the Pre-IPO Placement to the Stock Exchanges within 24 hours of the Pre-IPO Placement.

21. Neither the (i) BRLMs or any associate of the BRLMs (other than mutual funds sponsored by entities which are associates of the BRLMs or insurance companies promoted by entities which are associates of the BRLMs or AIFs sponsored by entities which are associates of the BRLMs or FPIs (other than individuals, corporate bodies and family offices) sponsored by entities which are associates of the BRLMs); nor (ii) any person related to the Promoters or Promoter Group can apply under the Anchor Investor Portion.

22. We confirm that the Book Running Lead Managers are not associates of the Company as per Regulation 21A of the SEBI Merchant Bankers Regulations.

146OBJECTS OF THE OFFER The Offer comprises the Fresh Issue of 54,047,958* Equity Shares bearing face value of ₹ 10 each, aggregating to ₹ 6,700.00* million by our Company and an Offer for Sale of to 20,307,393* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 2,518.12* million by the Selling Shareholders. For details of the Selling Shareholders and their respective portion of the Offered Shares, see “Other Regulatory and Statutory Disclosures – Authority for the Offer” on page 591.

*Subject to finalisation of Basis of Allotment Our Company, in consultation with the BRLMs, undertook a Pre-IPO Placement, as permitted under applicable law, aggregating to ₹ 1,440.00 million. The Pre-IPO Placement was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹ 123.97 per Equity Share bearing face value of ₹ 10 each, decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre- IPO Placement was reduced from the Fresh Issue, as disclosed in UDRHP – I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue is 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million.

Offer for Sale The object of the Offer for Sale is to allow the Selling Shareholders to sell to 20,307,393* Equity Shares held by them aggregating to ₹ 2,518.12 million. Each of the Selling Shareholders will be entitled to their respective portion of the proceeds from the Offer for Sale after deducting their respective proportion of Offer related expenses and the relevant taxes thereon. Our Company will not receive any proceeds from the Offer for Sale and the proceeds received from the Offer for Sale will not form part of the Net Proceeds. For further details, see “- Offer related expenses” on page 162 below.

* Subject to finalisation of Basis of Allotment Fresh Issue and Pre-IPO Placement The net proceeds of the Fresh Issue, i.e., gross proceeds of the Fresh Issue less the Offer related expenses to be borne by our Company (“Net Proceeds”) and the net proceeds of the Pre-IPO Placement, i.e., gross proceeds of the Pre-IPO Placement less the Pre-IPO Placement related expenses (“Net Pre-IPO Proceeds”), are proposed to

be utilised in the following manner:

1. Repayment and/or prepayment, in full or in part, of certain outstanding borrowings and prepayment penalties, as applicable, availed by:

(a) Our Company; and

(b) three of our wholly-owned Subsidiaries, AeroStructures Manufacturing India Private Limited, Aequs Consumer Products Private Limited and Aequs Engineered Plastics Private Limited, through investment in such Subsidiaries;

2. Funding capital expenditure to be incurred on account of purchase of machinery and equipment by:

(a) our Company; and

(b) one of our wholly-owned Subsidiaries, AeroStructures Manufacturing India Private Limited, through investment in such Subsidiary; and

3. Funding inorganic growth through unidentified acquisitions, other strategic initiatives and general corporate purposes. (collectively, the “Objects”).

In addition, we expect to achieve the benefits of listing of our Equity Shares on the Stock Exchanges, including enhancement of our Company’s brand name and creation of a public market for our Equity Shares in India.

147The main objects and objects incidental and ancillary to the main objects of our Memorandum of Association enables our Company to (i) undertake our existing business activities; and (ii) undertake the activities proposed to be funded from the Net Proceeds. Further, the main objects and objects incidental and ancillary to the main objects set out in the respective memorandum of association of our Subsidiaries, enables the respective Subsidiaries to undertake the activities proposed to be funded from the Net Proceeds.

Net Proceeds

The details of the proceeds of the Fresh Issue are summarized in the table below:

Particulars Estimated Amount^ (₹ in million) Gross proceeds of the Fresh Issue 6,700.00

Less: Offer related expenses*# 476.22 Net Proceeds 6,223.78 *Subject to finalisation of the Basis of Allotment. For details on Offer related expenses, see “- Offer related expenses” on page 162. ^ Our Company, in consultation with the BRLMs, undertook a pre-IPO Placement, as permitted under applicable law, aggregating to ₹ 1,440.00 million. The Pre-IPO Placement, was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹ 123.97 per Equity Share bearing face value of ₹ 10 each, decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue, as disclosed in the UDRHP – I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue, as disclosed in the UDRHP - I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.

# The aggregate proceeds of the Pre-IPO Placement and the Fresh Issue is ₹ 8,140.00 million and the Offer expenses apportioned to our Company is ₹ 476.22 million and the expenses for the Pre-IPO Placement is ₹ 32.40 million. Accordingly, the aggregate of the Net Proceeds and the Net Pre-IPO Proceeds is ₹ 7,631.38 million. For details with respect to the fees and expenses related to the Offer, please refer to “- Offer related expenses” on page 162. The proceeds from the Pre-IPO Placement shall be utilised towards the Objects in the manner set forth below.

Proposed schedule of implementation and deployment of Net Proceeds and the Net Pre-IPO Proceeds We propose to deploy the Net Proceeds and the Net Pre-IPO Proceeds towards the Objects in accordance with the

estimated schedule of implementation and deployment of funds set forth below: (₹ in million) Total Amount Amount to be Amount to be Amount estimated pending deployed deployed utilised by amount/ utilisation by from the Net from the Net the Company S. No. Particulars expenditure the Company Proceeds and Proceeds and from the Net to be funded from the Net Net Pre-IPO Net Pre-IPO Pre-IPO from the Net Pre-IPO Proceeds in Proceeds in Proceeds Proceeds Proceeds Fiscal 2026 Fiscal 2027 Repayment and/ or prepayment, in 4,331.67 202.54@ - 4,331.67 - full or in part, of certain outstanding

1. borrowings and prepayment penalties, as applicable, availed by:

(a) our Company 175.52 70.00 - 175.52 -

(b) three of our wholly-owned 4,156.15 132.54 - 4,156.15 - Subsidiaries, through investment in the below Subsidiaries i. AeroStructures 1,748.24 132.54 - 1,748.24 - Manufacturing India Private Limited ii. Aequs Consumer Products 2,311.59 - - 2,311.59 - Private Limited iii. Aequs Engineered Plastics 96.32 - - 96.32 - Private Limited Funding capital expenditure to be 640.02 166.42@ - 481.50 158.52

2. incurred on account of purchase of

machinery and equipment by:

(a) our Company 81.14 - - 58.79 22.35

(b) one of our wholly-owned 558.88 166.42 - 422.71 136.17 Subsidiaries, AeroStructures Manufacturing India Private Limited, through investment in such Subsidiary 148Total Amount Amount to be Amount to be Amount estimated pending deployed deployed utilised by amount/ utilisation by from the Net from the Net the Company S. No. Particulars expenditure the Company Proceeds and Proceeds and from the Net to be funded from the Net Net Pre-IPO Net Pre-IPO Pre-IPO from the Net Pre-IPO Proceeds in Proceeds in Proceeds Proceeds Proceeds Fiscal 2026 Fiscal 2027 Funding inorganic growth through 1,252.09 750.00& 288.64 - 1,540.73 unidentified acquisitions, other

3. strategic initiatives and general corporate purposes*# Net Proceeds*^# 6,223.78 1,118.96 288.64 4,813.17 1,699.25 * The cumulative amount to be utilized towards inorganic growth through unidentified acquisitions, other strategic initiatives and general corporate purposes shall not exceed 35% of the Gross Proceeds (including the Pre-IPO Proceeds). The amount utilised for general corporate purposes shall not exceed 25% of the Gross Proceeds (including the Pre-IPO Proceeds). Further, the amount utilized for funding inorganic growth alone through unidentified acquisitions and other strategic initiatives shall not exceed 25% of the Gross Proceeds (including Pre-IPO Proceeds).

& The utilization of the Net Pre-IPO Proceeds towards general corporate purposes which comprises investments in certain of our Subsidiaries through loans amounting to ₹ 640.00 million and investment in equity share capital amounting to ₹ 110.00 million, for meeting our operational and other business requirements, have been certified by Manian & Rao, Chartered Accountants (FRN No. 001983S), by way of their certificate dated November 26, 2025.

^ Our Company, in consultation with the BRLMs, undertook a Pre-IPO Placement, as permitted under applicable law, aggregating to ₹ 1,440.00 million. The Pre-IPO Placement, was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹ 123.97 per Equity Share bearing face value of ₹ 10 each, as decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue as disclosed in the UDRHP I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue as disclosed in the UDRHP - I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.

#The aggregate proceeds of the Pre-IPO Placement and the Fresh Issue is ₹ 8,140.00 million and the Offer expenses apportioned to our Company is ₹ 476.22 million and the expenses for the Pre-IPO Placement is ₹ 32.40 million. Accordingly, the aggregate of the Net Proceeds and the Net Pre-IPO Proceeds is ₹ 7,631.38 million. For details with respect to the fees and expenses related to the Offer, please refer to “- Offer related expenses” on page 162. The Net Pre-IPO Proceeds shall be utilised towards the Objects in the manner shown above.

@ As certified by our Statutory Auditors by way of their certificate dated November 26, 2025.

Pursuant to (i) resolutions dated September 24, 2025, read with November 26, 2025; and (ii) a resolution dated November 14, 2025, passed by our Board, our Company has approved the utilisation of the Net Proceeds and the Net Pre-IPO Proceeds, respectively, for the Objects, in accordance with the aforementioned schedule of implementation and deployment.

The requirement and deployment of funds as indicated above are based on our current business plan, internal management estimates, prevailing financial and market conditions, competition, business needs, strategies and other commercial and technical factors, including interest rates, exchange rate fluctuations and other charges, and the financing and other agreements entered into by our Company. The Objects have not been appraised by any bank or financial institution or other independent agency. We may have to revise our funding requirements and deployment from time to time on account of various factors, such as the timing of completion of the Offer, financial and market conditions, change in costs, our management’s analysis of economic trends and our business requirements, fund requirements in our operations, competitive landscape as well as general factors affecting our results of operations, financial condition, business and strategy, access to capital, interest rate fluctuations or other external factors, which may not be within the control of our management. This may entail rescheduling and revising the funding requirement for a particular Object or increasing or decreasing the amounts earmarked towards any of the Objects at the discretion of our management, subject to compliance with applicable laws. For details of the risk in this regard, see “Risk Factors – We have not yet placed orders for purchasing additional machinery and equipment required in the units in the manufacturing clusters we operate in. If there is any delay in placing such orders or if the vendors are not able to supply the additional machinery and equipment in a timely manner, or at all, this may result in time and cost overruns, which may adversely affect our business, results of operations, financial condition and cash flows.” on page 71.

If the Net Proceeds are not utilized (in full or in part) for the Objects during the period stated above due to such factors, the remaining Net Proceeds and the Net Pre-IPO Proceeds shall be utilized in the next Fiscal as may be determined by our Company, in accordance with applicable laws. Further, if the actual utilisation towards the Objects is lower than the proposed deployment, such surplus amount may be used towards: (i) one or more of the other Objects as set out above; and/or (ii) funding inorganic growth through unidentified acquisitions, other strategic initiatives and general corporate purposes, provided that (a) the total amount to be utilized towards general corporate purposes does not exceed 25% of the Gross Proceeds (including the Pre-IPO Proceeds); (b) the 149cumulative amount to be utilized for general corporate purposes and our object of funding inorganic growth through unidentified acquisitions and other strategic initiatives shall not exceed 35% of the Gross Proceeds (including the Pre-IPO Proceeds); and (c) the amount to be utilized for our object of funding inorganic growth alone through unidentified acquisitions and other strategic initiatives shall not exceed 25% of the Gross Proceeds (including Pre-IPO Proceeds).

Details of the Objects

1. Repayment and/ or prepayment, in full or in part, of certain outstanding borrowings and prepayment penalties, as applicable, availed by (a) Company; and (b) three of our wholly-owned Subsidiaries, ASMIPL,ACPPL, and AEPPL, through investment in such Subsidiaries Our Company and our wholly-owned Subsidiaries, have entered into various financing arrangements, including borrowings in the form of terms loans and working capital facilities, with banks and financial institutions. As on October 31, 2025, our Company and our Subsidiaries had aggregate outstanding borrowings of ₹ 6,308.60 million.

For further details, see “Financial Indebtedness” on page 577.

Our Company proposes to utilize an estimated amount of ₹ 4,331.67 million from the Net Proceeds towards prepayment and/ or repayment, in full or in part, of all or a portion of certain outstanding borrowings availed by our Company (₹ 175.52 million) and three of our wholly-owned Subsidiaries, ASMIPL, ACPPL and AEPPL (₹ 4,156.15 million). Pursuant to the terms of the borrowing arrangements, prepayment of certain indebtedness may attract prepayment charges as prescribed by the respective lender. Such prepayment charges, as applicable, will also be funded out of the Net Proceeds. In the event the Net Proceeds are insufficient for payment of pre-payment charges/ penalty, as applicable, such payment shall be made from the internal accruals of our Company. Given the nature of the borrowings and the terms of repayment/ prepayment, the aggregate outstanding amounts under the borrowings may vary from time to time and our Company and Subsidiaries may, in accordance with the relevant repayment schedule, repay or refinance some of their existing borrowings prior to Allotment.

We believe that such repayment or prepayment will help reduce our outstanding indebtedness on a consolidated basis and debt servicing costs and enable utilization of the internal accruals for further investment towards business growth and expansion. In addition, we believe that this would improve our ability to raise further resources in the future to fund potential business development opportunities.

The selection of borrowings proposed to be prepaid or repaid amongst our borrowings will be based on various factors, including (i) cost of the borrowing, including applicable interest rates, (ii) maturity profile and the remaining tenor of the loan, (iii) any conditions attached to the borrowings, restricting our ability to prepay/ repay the borrowings and time taken to fulfil, or obtain waivers for fulfilment of such conditions, or relating to the terms of repayment, (iv) levy of any prepayment penalties and the quantum thereof, (v) provisions of any laws, rules and regulations governing such borrowings, and (vi) other commercial considerations including, the amount of the loan outstanding.

The abovementioned factors will also determine the form of investment undertaken by our Company for prepayment and/or repayment of the borrowing arrangements availed by the Subsidiaries, i.e., being in the form of subscription or purchase of equity shares, preference shares, convertible or non-convertible securities, debt or any other instrument or combinations thereof. Such investments will be undertaken by our Company in three of our wholly-owned Subsidiaries, ASMIPL, ACPPL and AEPPL in the manner determined by our Company and as permitted under applicable law.

150The following table provides the details of the borrowings of our Company as on October 31, 2025, which we propose to prepay or repay, in full or in part, from the Net Proceeds (“Company’s Borrowings”):

(in ₹ million) Purpose for which loan was Amount Name of the Nature of Date of latest Sanctioned Applicable rate Repayment Pre-payment sanctioned as mentioned in S. No. outstanding as on lender borrowings sanction letter amount of interest schedule penalty conditions the underlying agreement/ October 31, 2025 document Aequs Limited 1 month repo Cash credit 102.69 1 year

(1) September 18, rate + 2.75% To meet the working capital HDFC Bank 250.00 Nil Pre-shipment 2025 requirements

142.83 SOFR + 200 bps 180 days finance Total (A) 250.00 245.52* *In accordance with Clause 9(A)(2)(b) of Part A of Schedule VI of the SEBI ICDR Regulations, our Company has obtained a certificate dated November 26, 2025 issued by the Statutory Auditors, certifying the utilisation of the aforementioned borrowings for purpose for which such borrowings were availed.

The following table provides the details of the borrowings of three of our wholly-owned Subsidiaries, AeroStructures Manufacturing India Private Limited, Aequs Consumer Products Private Limited and Aequs Engineered Plastics Private Limited, as on October 31, 2025, which we propose to prepay or repay, in full or in part, from the Net Proceeds (“Subsidiaries’ Borrowings”):

(in ₹ million) Purpose for which loan Date of Sanctioned Amount Pre-payment was sanctioned as S. Name of the latest Applicable rate Repayment Nature of borrowings amount outstanding as on penalty mentioned in the No. lender sanction of interest schedule October 31, 2025 conditions underlying agreement/ letter document AeroStructures Manufacturing India Private Limited 3 months repo Repayable Cash credit 45.41 rate + 2.70% on demand Up to 180 days (Pre- shipment To meet the working capital HDFC Bank June 9, 2025 950.00 Nil

(1) and post- requirements Export credit (EPC/PCFC) 781.54 SOFR + 200 BPS shipment tenor not to exceed 270 days) Repo rate + 12 months To meet the working capital Cash credit 1,000.00 22.14

3.50% requirement 151Purpose for which loan Date of Sanctioned Amount Pre-payment was sanctioned as S. Name of the latest Applicable rate Repayment Nature of borrowings amount outstanding as on penalty mentioned in the No. lender sanction of interest schedule October 31, 2025 conditions underlying agreement/ letter document Prepayment May 12, within 12 2025 months – 4%.

Prepayment 12 months/ Axis Bank within 24 1 year SOFR + usance RPC/ PCFC 899.15 months but 190 BPS period of up after 12 months to 270 days - 3%.

Prepayment after 24 months - 2%.

Sub-total (B) 1,950.00 1,748.24 Aequs Consumer Products Private Limited Towards part financing development of project/ part RTL shall financing of estimated be repaid in project cost.

21 consecutive Project means Advanced quarterly Technology Plant (ATP) at

(2) October 20, 3 months T-bill + installments HDFC Bank Rupee term loan (RTL) 2,000.00 1,547.38 2% Hubballi, Karnataka for 2023 2% commencing contract manufacturing of from laptop bottom base (flash) March’2025 units with capacity of and ending 10,000 units/day and in smartwatch enclosures March’2030

(hulk) with capacity of 4,000 units/day Repayable in 21 6 months treasury staggered For the purpose of setting bill + 0.77% quarterly up a new manufacturing

(3) November (credit risk instalments Karnataka Bank Term loan 983.74 764.21 2% unit for production of laptop 22, 2023 premium/ spread) after initial bottom base units and + 2% (fixed holiday smartwatch enclosures spread) period of 18 months commencing 152Purpose for which loan Date of Sanctioned Amount Pre-payment was sanctioned as S. Name of the latest Applicable rate Repayment Nature of borrowings amount outstanding as on penalty mentioned in the No. lender sanction of interest schedule October 31, 2025 conditions underlying agreement/ letter document from March 2025 and ending in March 2030

(4) Sub-total (C) 2,983.74 2,311.59 Aequs Engineered Plastics Private Limited Cash credit 65.75 Repo +3.90% 12 months 12 months/

(5) February 20, To meet the working capital Axis Bank Export credit facilities 150.00 USD 6 Months usance 2% 2025 30.57 requirements (EPC/RPC/PCFC/RPCFC) SOFR+ 300bps period of 180 days Sub-total (D) 150.00 96.32 Sub-total (E) 5,083.74 4,156.15 (E=B+C+D) Total (A+E) 5,333.74 4,401.67 In accordance with Clause 9(A)(2)(b) of Part A of Schedule VI of the SEBI ICDR Regulations, our Subsidiaries, AeroStructures Manufacturing India Private Limited, Aequs Consumer Products Private Limited and Aequs Engineered Plastics Private Limited have obtained a certificate dated November 26, 2025 issued by the Statutory Auditors, certifying the utilisation of the aforementioned borrowings for purpose for which such borrowings were availed.

Notes: • Details are populated as at October 31, 2025. • All the PCFC loan above are USD loans. The conversion rate as on October 31, 2025 (USD/INR- 88.64) is considered. • SOFR- Secured overnight financing rate.

• EPC- Export packing credit. • RPCFC- Running pre shipment credit in foreign currency For further details on the abovementioned borrowings, see “Financial Indebtedness - Key terms of borrowings availed by our Company and our Subsidiaries” on page 579.

Details of the advanced technology plant (“ATP”) forming part of the Hubballi Manufacturing Cluster Sr. No Particulars Details

1. Total project cost ₹ 4,798.10 million

2. Source of finance Out of the total project cost of ₹ 4,798.10 million, except ₹ 2,974.00 million, which is funded from the loans availed by us from (i) HDFC Bank and (ii) Karnataka Bank, there are no other borrowings availed by us for funding the ATP. For details, see “– Details of the Objects – 1. Repayment and/ or prepayment, in full or in part, of certain outstanding borrowings and prepayment penalties, as applicable, availed by (a) Company; and (b) three of our wholly-owned Subsidiaries, ASMIPL, ACPPL and AEPPL, through investment in such Subsidiaries” on page 150.

153Sr. No Particulars Details

3. Details of any other borrowing for the ATP N.A.

4. Capacity utilization (%) As on date, ACPPL has commenced commercial production of laptop bottom base units at the ATP with effect from July 31, 2025, and intends to commence production of smartwatch enclosures in the second half of the Financial Year 2026.

5. Benefit accrued by the Company We believe that such repayment or prepayment will help reduce our outstanding indebtedness on a consolidated basis and debt servicing costs and enable utilization of the internal accruals for further investment towards business growth and expansion. In addition, we believe that this would improve our ability to raise further resources in the future to fund potential business development opportunities.

6. Commencement and expected date of Out of the total project cost of ₹ 4,798.10 million, as on March 31, 2025, ₹ 2,516.20 million (excluding interest incurred during Completion construction) has been utilized. Further, as on date, ACPPL has commenced commercial production of laptop bottom base units at the ATP with effect from July 31, 2025, and intends to commence production of smartwatch enclosures in the second half of the Financial Year 2026.

7. Details of land/ infrastructure leased by the For the purposes of the ATP, ACPPL has leased a total land area of 206,166 sq. feet from one of our Group Companies, Hubballi Company Durable Goods Cluster Private Limited, for a period of 10 years commencing from September 21, 2022, at a monthly rent of ₹ 4.74 million.

For further details, see “Our Business – Manufacturing Clusters and Facilities” on page 312.

Further, please see below certain key financial indicators of AeroStructures Manufacturing India Private Limited, Aequs Consumer Products Private Limited and Aequs

Engineered Plastics Private Limited: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 AeroStructures Manufacturing India Private Limited Revenue from operations 5,081.83 4,598.27 3,612.12 Reserves 1,969.34 1,615.15 1,064.25 Total income 5,128.54 4,690.01 3,678.12 Profit/(Loss) after tax 334.34 518.79 (160.65) Profit/(Loss) after tax margin (%) 6.58 11.28 (4.45) Earnings per share (Basic) (in ₹) 6.87 10.67 (3.30) Earnings per share (Diluted) (in ₹) 6.87 10.67 (3.30) Total borrowings 1,835.83 1,475.40 1,642.80 Net worth 2,456.16 2,102.15 1,542.67 Equity share capital 486.42 Debt equity ratio 3.77 3.03 3.38 Net asset value per Equity Share (in ₹) 50.49 43.22 31.88 Aequs Consumer Products Private Limited Revenue from operations 158.07 311.69 299.39 Reserves 2,166.61 1,223.17 (108.29) Total income 212.72 332.51 299.16 154Particulars For the Fiscal 2025 2024 2023 Profit/(Loss) after tax (125.33) (260.30) (177.14) Profit/(Loss) after tax margin (%) (79.29) (83.51) (59.17) Earnings per share (Basic) (in ₹) (1.54) (4.65) (6.54) Earnings per share (Diluted) (in ₹) (1.54) (4.65) (6.54) Total borrowings 1,676.03 638.21 81.54 Net worth 3,021.35 1,876.89 260.23 Equity share capital 854.75 653.72 368.52 Debt equity ratio 1.96 0.98 0.22 Net asset value per Equity Share (in ₹) 35.35 28.71 7.06 Aequs Engineered Plastics Private Limited Revenue from operations 546.54 1,075.91 1,356.00 Reserves (1,752.05) (1,468.00) (1,378.02) Total income 555.98 1,083.87 1,396.08 Profit/(Loss) after tax (284.74) (97.54) (198.01) Profit/(Loss) after tax margin (%) (5.21) (9.07) (14.60) Earnings per share (Basic) (in ₹) (1.61) (0.57) (1.51) Earnings per share (Diluted) (in ₹) (1.61) (0.57) (1.51) Total borrowings 283.80 129.00 204.00 Net worth 13.00 298.00 287.59 Equity share capital 1,766.15 1,766.15 1,666.15 Debt equity ratio 0.16 0.07 0.12 Net asset value per Equity Share (in ₹) 0.07 1.69 1.73

1552. Funding the capital expenditure to be incurred on account of purchase of machinery and equipment by (a) our Company; and (b) one of our wholly-owned Subsidiaries, ASMIPL, through investment in such Subsidiary In order to meet the increasing demand of our existing and new customers and to enhance our manufacturing capabilities in the aerospace sector, we intend to further expand our existing capacities by purchasing additional machinery and equipment. Our Company expects to benefit from the proposed acquisition through expansion and enhancement of its facilities and manufacturing capabilities through the purchase of such additional machinery and equipment to meet the increasing demand and addition of new customers.

In this regard, our Company intends to utilise ₹ 640.02 million from the Net Proceeds to fund the capital expenditure to be incurred by our Company (₹ 81.14 million) and one of our wholly-owned Subsidiaries, ASMIPL (₹ 558.88 million), on account of purchase of such machinery and equipment. The amount to be spent and machinery and equipment to be procured by our Company will depend upon business requirements and technology advancements. Accordingly, the details of the equipment, plant and machinery to be procured from the Net Proceeds have been suitably updated below.

Across our units in three manufacturing clusters in India and two dedicated aerospace facilities outside India, that we operate in, we had an aggregate capacity of 2,919,058 annual machining/ molding hours for products within the Aerospace Segment and Consumer Segment, and over 200 CNC machines for Aerospace Segment and 161 molding machines deployed for consumer products, each as of September 30, 2025. For further details in relation to the capacity utilization across our manufacturing facilities and clusters please see, “Our Business - Manufacturing Clusters and Facilities” on page 312.

Our Company has identified the machinery and equipment to be purchased and obtained quotations from respective vendors. While our Company shall make certain payments as advances towards each such quotation, which shall be funded out of our internal accruals, the remaining amounts under such quotations shall be funded out of the Net Proceeds.

156An indicative list of such machinery and equipment that we intend to purchase, along with details of the quotations that we have received in this respect are set forth below, which have been certified by Manian & Rao, Chartered Accountants (FRN No. 001983S), by way of their certificate dated November 26, 2025:

(a) Our Company Our Company intends to utilise ₹ 81.14 million from the Net Proceeds to fund the capital expenditure to be incurred by our Company on account of purchase of such machinery and equipment, as set forth below:

Amount to Details of the Price per Total price be paid Description of the Name of the facility where unit (in the Price per (in the Total price from the Date of Date of Estimated time of machinery/ supplier / Quantity machinery/ currency unit (in ₹ currency (in ₹ Net expiry of quotation delivery equipment vendor equipment will used in the million)* used in the million)* Proceeds^ quotation be installed quotation)* quotation)* (in ₹ million)* Multi Tasking Turning Center $ 0.59 $ 0.59 September January 15, 1 52.34** 52.34** 47.10 March 2026 Model PUMA SMX million million 15, 2025 2026 DN Solutions 2600S Facility operated Co. Ltd., by our Company Four or five months Korea PUMA 2100 Y II Y- in the Belagavi $ 0.14 $ 0.28 September January 31, from the date of 2 12.42** 24.84 22.35 Axis Turmill Center Manufacturing million million 17, 2025 2026 receipt of the order Cluster and advance.

ACE Four or five weeks SJE-08LM FANUC ₹ 2.05 ₹ 12.30 November 7, January 31, Designers 6 2.05 12.30 11.69 from the date of CNC Machine million million 2025 2026 Limited, India order and advance.

Total 89.48 81.14 ^ Balance amount to be paid through internal accruals and the Net Pre-IPO Proceeds.

(b) ASMIPL One of our wholly-owned Subsidiaries, ASMIPL, intends to utilise ₹ 558.88 million from the Net Proceeds to fund the capital expenditure to be incurred by ASMIPL on account of purchase of such machinery and equipment, as set forth below:

Details of the Price per unit Amount to Total price (in Description of Name of the facility where (in the Price per Total price be paid from Date of Estimated the currency Date of the machinery/ supplier / Quantity machinery/ currency used unit (in ₹ (in ₹ the Net expiry of time of used in the quotation equipment vendor equipment will be in the million)* million)* Proceeds^ (in quotation delivery quotation)* installed quotation)* ₹ million)* DVF 6500 5 DN Solutions Four or five Facility operated Axis CNC Co. Ltd., January 15, months from 5 by ASMIPL in the $ 0.41 million 36.28** $ 2.05 million 181.40 87.36 April 21, 2025 Machine with Korea 2026 the date of Belagavi accessories receipt of the 157Details of the Price per unit Amount to Total price (in Description of Name of the facility where (in the Price per Total price be paid from Date of Estimated the currency Date of the machinery/ supplier / Quantity machinery/ currency used unit (in ₹ (in ₹ the Net expiry of time of used in the quotation equipment vendor equipment will be in the million)* million)* Proceeds^ (in quotation delivery quotation)* installed quotation)* ₹ million)* DVF 8000 5 Manufacturing order and Axis CNC Cluster advance.

3 $ 0.49 million 43.02** $ 1.46 million 129.07 25.90 Machine with accessories VCF 850 LSR II CNC Machine 1 $ 0.51 million 44.88** $ 0.51 million 44.88 40.53 with accessories DVF 6500T 5 Axis CNC September 15, January 15, 1 $ 0.44 million 38.94** $ 0.44 million 38.94 34.56 February 2026 Machine with 2025 2026 accessories Nine to 10 months from the date of LPS Machine January 15, 1 $ 3.15 million 279.42** $ 3.15 million 279.42 249.83 April 21, 2025 receipt of the with accessories 2026 purchase

order and advance.

12 to 16 weeks from the week of the confirmed Global Lite Hexagon purchase March 27, January 15,

7.10.7 CMM Metrology 1 ₹ 5.20 million 5.20 ₹ 5.20 million 5.20 2.71 order. Time 2025 2026 with accessories India Pvt. Ltd. for shipping to be confirmed at the time of Facility operated placement of by ASMIPL in the the order.

Belagavi DVF 6500 5 Manufacturing Axis CNC November 7, January 31, 2 Cluster $ 0.41 million 36.28** $ 0.82 million 72.56 65.30 Machine with 2025 2026 accessories Four or five NHP 5000 CNC DN Solutions months from Horizontal Co. Ltd., November 7, January 31, the date of 1 $ 0.24 million 21.29** $ 0.24 million 21.29 19.16 machining Korea 2025 2026 order and center advance.

PUMA 2100 Y November 7, January 31, II Y Axis 3 $ 0.14 million 12.42** $ 0.42 million 37.26 33.53 2025 2026 Turmill center Total 810.02 558.88 ^ Balance amount to be paid through internal accruals and the Net Pre-IPO Proceeds.

* Exclusive of applicable taxes, duties, and local levies.

158** The cost per unit in the quotations obtained from the vendor is in USD. Therefore, the rate of conversion of USD into INR considered for the cost per unit as on November 7, 2025 has been sourced from www.rbi.org.in.

The exchange rate as on November 7, 2025 was ₹ 88.70 per USD. #Orders have been placed and advances have been paid for such machinery/ equipment by ASMIPL.

159All quotations received from the vendors mentioned above are valid as on the date of this Prospectus as mentioned above. Certain of the quotations mentioned above do not include cost of shipping, insurance, customs duties and other applicable taxes as these can be determined only at the time of placing of orders. Such additional costs shall be funded from the Net Proceeds proposed to be utilised towards the purchase of machinery equipment or through internal accruals, as required.

Except for the machinery for which the purchase orders have been placed as mentioned above, we have not entered into any definitive agreements with any of these vendors and there can be no assurance that the same vendors would be engaged to eventually supply the machinery and equipment at the same costs. If there is any increase in the costs of equipment, the additional costs shall be paid by our Company from its internal accruals. The quantity of machinery and equipment to be purchased is based on the present estimates of our management and could be subject to change in the future.

The abovementioned factors will also determine the form of investment undertaken by our Company for funding the capital expenditure to be incurred by one of our wholly-owned Subsidiaries, ASMIPL, i.e., being in the form of subscription or purchase of equity shares, preference shares, convertible or non-convertible securities, debt or any other instrument or combinations thereof. Such investments will be undertaken by our Company in one of our wholly-owned Subsidiaries, ASMIPL in the manner determined by our Company and as permitted under applicable law.

Further, no second-hand or used machinery and equipment are proposed to be purchased out of the Net Proceeds.

For further details, see “Risk Factors – We have not yet placed orders for purchasing additional machinery and equipment required in the units in the manufacturing clusters we operate in. If there is any delay in placing such orders or if the vendors are not able to supply the additional machinery and equipment in a timely manner, or at all, this may result in time and cost overruns, which may adversely affect our business, results of operations, financial condition and cash flows.” on page 71.

3. Funding inorganic growth through unidentified acquisitions, other strategic initiatives and general corporate purposes

(a) Funding inorganic growth through unidentified acquisitions and other strategic initiatives Our Company proposes to deploy the balances of the Net Proceeds aggregating to ₹ 1,252.09 million and the Net Pre-IPO Proceeds aggregating to ₹ 288.64 million, towards funding inorganic growth through unidentified acquisitions, other strategic initiatives and general corporate purposes, in a manner as approved by our Board from time to time, subject to such amount to be utilised for general corporate purposes and towards unidentified acquisitions and other strategic initiatives not, in aggregate, exceeding 35% of the Gross Proceeds (including the Pre-IPO Proceeds), out of which the amounts to be utilised towards either of (i) general corporate purposes, or (ii) unidentified acquisitions and other strategic initiatives, shall not exceed 25% of the Gross Proceeds (including the Pre-IPO Proceeds).

To foster our expansion, we intend to pursue opportunities for evaluating potential targets for strategic investments, acquisitions, joint ventures and partnerships, that complement our business operations, strengthen or establish our presence in targeted markets.

Historically, we were primarily focused on growing our business organically, however, we have selectively acquired businesses which are able to synergise with our existing business model. We have benefited from the acquisitions/ strategic initiatives undertaken by us in the past. The table below summarises such acquisitions/ strategic initiatives we have undertaken in the past. For further details, see “History and Certain Corporate Matters - Details regarding material acquisitions or divestments of business/ undertakings, mergers, amalgamation, any revaluation of assets, etc. in the last 10 years” on page 339.

Financial Percentage of Country of Rationale and benefits S. No. Name of the entity Year of shareholding incorporation accrued acquisition Aequs Aero Expansion into the North

1. Machine Inc. American market pursuant to 100% USA 2016 (formerly known as setting up of manufacturing T&K Machine Inc.) facility Expansion into the European

2.

SIRA Group 100% France 2017 market and acquisition of complex aerospace capabilities 160Financial Percentage of Country of Rationale and benefits S. No. Name of the entity Year of shareholding incorporation accrued acquisition Aerostructures

3. Facilitate exit of erstwhile joint Assemblies India 26%* India 2021 venture partner, Saab AB (publ) Private Limited Aerospace Establishment of a joint venture

4.

Processing India 50% India 2007 for providing innovative surface Private Limited treatment solutions Establishment of a joint venture for forging small to medium- SQuAD Forging sized aero-structural parts for

5.

India Private 50% India 2011 engines, landing gear and Limited braking system components in aluminium, steel, titanium or nickel-based alloys Establishment of a joint venture for manufacturing of aluminium non-stick and ceramic coating

6. Aequs Cookware cookware, triply cookware and 50% India 2024 Private Limited triply cooker, kitchenware and houseware including cookware, bakeware utensils, cutlery and cutting boards * Prior to execution of the share purchase agreement dated July 14, 2021, pursuant to which our Company acquired 26% of the equity share capital of Aerostructures Assemblies India Private Limited (“AAI”), AAI was an associate of our Company. Consequently, pursuant to such acquisition under the said agreement, AAI became our Subsidiary. For details, see “History and certain corporate matters – Details regarding material acquisitions or divestments of business/ undertakings, mergers, amalgamation, any revaluation of assets, etc. in the last 10 years – Share purchase agreement dated July 14, 2021 entered into between our Company, Saab AB (publ) and Aerostructures Assemblies India Private Limited (“Saab SPA”)” on page 339.

We intend to seek opportunities that we believe align with our strategic business objectives and intend to deploy a portion of the Net Proceeds towards such opportunities. This amount is based on our management’s current estimates, budgets, and other relevant considerations. The actual deployment of funds and the timing of deployment will depend on a number of factors, including the timing, nature, size and number of acquisitions or strategic initiatives proposed, as well as general macro or micro economic factors affecting our results of operations, financial condition and access to capital.

As on the date of this Prospectus, we have not entered into any definitive agreements towards any future acquisitions or strategic initiatives. We may identify and evaluate potential targets for strategic investments, acquisitions, joint ventures and partnerships, based on a number of factors, including: (i) expertise and experience in markets that we operate in or wish to expand into; (ii) strategic compatibility or synergy with our existing businesses; (iii) additional or enhanced products and services in order to expand, diversify and/or improve our offerings; (iv) strengthening our market share in existing markets or establishing presence in new markets (including additional geographical regions); and (v) access to infrastructure and capabilities, including ones which supplement or complement our existing infrastructure.

Our acquisition strategy is primarily driven by our Board, and typically involves detailed due diligence being undertaken by us on the potential target and subsequently negotiating and finalizing definitive agreements towards such acquisition. We may engage external advisors and consultants to assist us in the process of such acquisition, with whom (and with the potential target) we enter into customary non-disclosure agreements.

The above factors will also determine the form of investment for these potential unidentified acquisitions or strategic initiatives, i.e., whether they will involve equity, debt or any other instrument or combination thereof. At this stage, our Company cannot determine whether the form of investment will be equity, debt or any other instrument or combination thereof. The portion of the Net Proceeds allocated towards this Object may not be the total value or cost of any such strategic initiatives but is expected to provide us with sufficient financial leverage to enter into binding agreements. In the event that there is a shortfall of funds required for such strategic initiatives, such shortfall shall be met out of the portion of the Net Proceeds allocated for general corporate purposes and/or through our internal accruals or debt financing or any combination thereof. For further details in relation to the risks involved, see “Risk Factors – If our Net Proceeds to be utilised towards inorganic growth through unidentified acquisitions and strategic initiatives are insufficient for the cost of our inorganic acquisitions and strategic initiatives, we may have to seek alternative forms of funding” on page 71.

161(b) General corporate purposes The Net Proceeds will first be utilized for the Objects as set out above. Our Company intends to deploy any balances left out of the Net Proceeds and Net Pre-IPO Proceeds towards general corporate purposes, as approved by our management, from time to time, subject to (i) such utilization for general corporate purposes not exceeding 25% of the Gross Proceeds (including Pre-IPO Proceeds); and (ii) the cumulative amount to be utilized for general corporate purposes and our object of funding inorganic growth through unidentified acquisitions and other strategic initiatives shall not exceed 35% of the Gross Proceeds (including the Pre-IPO Proceeds), in compliance with Regulation 7(2) of the SEBI ICDR Regulations.

Such general corporate purposes may include, but are not restricted to, the following:

1. strengthening marketing capabilities and brand building exercises;

2. funding working capital requirements of our Company and Subsidiaries including by way of investments in the Subsidiaries; and/or

3. meeting ongoing general corporate purposes or contingencies.

The allocation or quantum of utilization of funds towards the specific purposes described above will also be determined by our Board, based on our business requirements and other relevant considerations, from time to time. Our management, in accordance with the policies of the Board, shall have the flexibility in utilising surplus amounts, if any. In the event that our Company is unable to utilise the entire amount that our Company has currently estimated for use out of Net Proceeds in a Fiscal, our Company will utilise such unutilised amount in the next Fiscal.

Means of finance The fund requirements set out above are proposed to be funded from the Net Proceeds and internal accruals.

Accordingly, we confirm that there are no requirements to make firm arrangements of finance under Regulation 7(1)(e) of the SEBI ICDR Regulations through verifiable means towards at least 75% of the stated means of finance, excluding the amount to be raised from the Offer. In case of a shortfall in the Net Proceeds or any increase in the actual utilisation of funds earmarked for the Objects, our Company may explore a range of options including utilizing our internal accruals.

Bridge financing Our Company has not raised any bridge loans from any bank or financial institution as on the date of this Prospectus, which are proposed to be repaid from the Net Proceeds.

Offer related expenses The total expenses of the Offer are estimated to be approximately ₹ 657.40 million.

Other than (a) listing fees, fees of statutory auditors for the statutory audit (to the extent not attributable to the Offer) and expenses in relation to product or corporate advertisements consistent with past practice of the Company which will be borne by the Company; and (b) fees and expenses in relation to the legal counsel appointed by the respective Selling Shareholders which shall be borne by the respective Selling Shareholders, all costs, charges, fees and expenses associated with and incurred directly with respect to the Offer (including all applicable taxes except securities transaction taxes which shall be solely borne by the Selling Shareholders) and directly attributable to the Offer, shall be shared among the Company and the Selling Shareholders, on a pro rata basis, in proportion to the number of Equity Shares (i) issued and Allotted by the Company through the Fresh Issue and

(ii) offered and transferred by each of the Selling Shareholders through the Offer for Sale, in accordance with Applicable Law. All such payments shall be made by the Company on behalf of the Selling Shareholders and, each of the Selling Shareholders shall reimburse the Company, on a pro rata basis, in proportion to its respective portion of the Offered Shares, for any documented expenses, along with applicable taxes, incurred by the Company on behalf of such Selling Shareholder. In the event that the Offer is postponed or withdrawn or declared unsuccessful or the listing and trading approvals from the Stock Exchanges are not received, all expenses in relation to the Offer (including the fees of the Book Running Lead Managers, and their respective reimbursement for expenses which may have accrued up to the date of such postponement, withdrawal, abandonment or failure as set out in the Fee Letter), shall be borne and paid by the Company and each of the Selling Shareholders, on a pro rata basis, in proportion to the number of Equity Shares proposed to be issued and Allotted by the Company 162through the Fresh Issue and the respective portions of the Offered Shares proposed to be offered and transferred by each of the Selling Shareholders in the Offer for Sale.

The estimated Offer related expenses are as follows:

Activity Estimated amount As a % of total As a % of Offer (in ₹ million) estimated Offer size expenses* BRLMs’ fees and commissions (including 230.45 35.06% 2.50% underwriting commission) Selling commission, commission and processing fees 19.66 2.99% 0.21% for SCSBs and Bankers to the Offer and fees payable to the Sponsor Bank(s) for Bids made by UPI Bidders.

Brokerage, selling commission and bidding charges for members of the Syndicate, Registered Brokers, RTAs and CDPs (1)(2)(3)(4) (5)(6) Fees payable to the Registrar to the Offer 4.83 0.73% 0.05%

Other expenses: - Listing fees, SEBI filing fees, BSE & NSE 63.47 9.66% 0.69% processing fees, book building software fees and other regulatory expenses - Printing and stationery expenses 7.92 1.21% 0.09% - Advertising and marketing expenses for the Offer 46.50 7.07% 0.50% Fees payable to other advisors to the Offer, including 257.22 39.13% 2.79% but not limited to Statutory Auditors, legal counsel, independent chartered accountant, industry expert, and independent chartered engineer Miscellaneous 27.35 4.15% 0.30% Total 657.40 100.00% 7.13% * Offer expenses include goods and services tax, where applicable. Offer expenses are estimates and are subject to change.

(1) Selling commission payable to the SCSBs on the portion for Retail Individual Investors and Non-Institutional Investors, which are directly procured and uploaded by the SCSBs, would be as follows:

Portion for Retail Individual Investors* 0.30% of the Amount Allotted (plus applicable taxes) Portion for Non-Institutional Investors* 0.15% of the Amount Allotted (plus applicable taxes) Portion for Eligible Employees* 0.15% of the Amount Allotted (plus applicable taxes) *Amount Allotted is the product of the number of Equity Shares Allotted and the Offer Price.

Selling commission payable to the SCSBs will be determined on the basis of the bidding terminal id as captured in the Bid book of BSE or NSE. No processing fees shall be payable by our Company and the Selling Shareholders to the SCSBs on the applications directly procured by them.

(2) Processing fees payable to the SCSBs on the portion for RIIs, NIIs and Eligible Employees (excluding UPI Bids) which are procured by the members of the Syndicate/sub- Syndicate/Registered Broker/CRTAs/ CDPs and submitted to SCSB for blocking, would be as follows:

Portion for Non-Institutional Investors and Qualified Institutional Bidders ₹10 per valid application (plus applicable taxes) with bids above Rs. 0.5 million Notwithstanding anything contained in (2) above the total processing fees payable under this clause will not exceed ₹1.00 million (plus applicable taxes) and in case if the total processing fees exceeds ₹1 million (plus applicable taxes) then uploading charges/ processing fees will be paid on pro-rata basis.

(3)Brokerage, selling commission on the portion for UPI Bidders (using the UPI mechanism) which are procured by members of the Syndicate (including their sub-Syndicate Members), RTAs and CDPs or for using 3-in-1 type accounts- linked online trading, demat & bank account

provided by some of the brokers which are members of Syndicate (including their sub-Syndicate Members) would be as follows:

Portion for Retail Individual Investors* 0.30% of the Amount Allotted (plus applicable taxes) Portion for Non-Institutional Investors* 0.15% of the Amount Allotted (plus applicable taxes) Portion for Eligible Employees* 0.15% of the Amount Allotted* (plus applicable taxes) *Amount Allotted is the product of the number of Equity Shares Allotted and the Offer Price.

The selling commission payable to the Syndicate / sub-Syndicate Members will be determined as under:

(i) for RIIs, NIIs and Eligible Employees (up to ₹ 0.50 million), on the basis of the application form number / series, provided that the application is also bid by the respective Syndicate / Sub-Syndicate Member. For clarification, if a Syndicate ASBA application on the application form number / series of a Syndicate / Sub Syndicate Member, is bid by an SCSB, the selling commission will be payable to the SCSB and not the Syndicate / Sub-Syndicate Member; and

(ii) for NIIs (above ₹ 0.50 million), on the basis of the Syndicate ASBA Form bearing SM Code & Sub-Syndicate Code of the application form submitted to SCSBs for Blocking of the Fund and uploading on the Exchanges platform by SCSBs. For clarification, if a Syndicate ASBA application on the application form number / series of a Syndicate / Sub-Syndicate Member, is bid by an SCSB, the selling commission will be payable to the Syndicate / Sub Syndicate members and not the SCSB.

The selling commission and bidding charges payable to Registered Brokers, the RTAs and CDPs will be determined on the basis of the bidding terminal id as captured in the Bid Book of BSE or NSE.

163.

(4)Uploading charges payable to members of the Syndicate (including their sub-Syndicate Members), RTAs and CDPs on the applications made by UPI Bidders using 3-in-1 accounts/Syndicate ASBA mechanism and Non-Institutional Investors which are procured by them and submitted to SCSB for blocking or using 3-in-1 accounts/Syndicate ASBA mechanism, would be as follows: ₹ 10 plus applicable taxes, per valid application bid by the Syndicate (including their sub-Syndicate Members), RTAs and CDPs.

Bidding charges/ Processing Charges payable on the application made using 3-in-1 accounts will be subject to a maximum cap of ₹ 2.00 million (plus applicable taxes), in case if the total Bidding charges /processing Charges exceeds ₹ 2.00 million (plus applicable taxes) then it will be paid on pro-rata basis for portion of (i) RII’s (ii) NII’s (iii) Eligible Employee, as applicable.

(5) Selling commission/ uploading charges payable to the Registered Brokers on the portion for RIIs, Non-Institutional Investors and Eligible Employees which are directly procured by the Registered Broker and submitted to SCSB for processing, would be as follows:

Portion for Retail Individual Investors ₹ 10 per valid bid cum application form (plus applicable taxes) subject to a maximum of ₹0.50 million (plus applicable taxes) Portion for Non-Institutional Investors ₹ 10 per valid bid cum application form (plus applicable taxes) subject to a maximum of ₹0.50 million (plus applicable taxes) Portion for Eligible Employees ₹ 10 per valid bid cum application form (plus applicable taxes) subject to a maximum of ₹ ₹0.50 million (plus applicable taxes) Notwithstanding anything contained above the total processing fees payable under this clause will not exceed ₹0.50 million (plus applicable taxes) and in case if the total processing fees exceeds ₹0.50 million (plus applicable taxes) then uploading charges/ processing fees will be paid on pro-rata basis.

(6) Uploading charges/ Processing fees for applications made by UPI Bidders using the UPI Mechanism would be as under:

Members of the Syndicate / RTAs / CDPs ₹ 30 per valid application (plus applicable taxes) subject to a maximum of Rs. 5.00 million HDFC Bank Limited ₹ Nil per valid Bid cum Application Form (plus applicable taxes)(UPI mandates).

The Sponsor Bank shall be responsible for making payments to the third parties such as remitter bank, NPCI and such other parties as required in connection with the performance of its duties under the SEBI circulars, the Syndicate Agreement and other applicable laws.

Kotak Mahindra Bank Limited ₹ Nil charges up to 500,000 UPI mandates, ₹6.50 per UPI mandates above 500,000 UPI mandates (plus applicable taxes).

The Sponsor Banks shall be responsible for making payments to the third parties such as remitter bank, NPCI and such other parties as required in connection with the performance of its duties under applicable SEBI circulars, agreements and other applicable laws All such commissions and processing fees set out above shall be paid as per the timelines in terms of the Syndicate Agreement and Cash Escrow and Sponsor Bank Agreement.

The total uploading charges / processing fees payable to Members of the Syndicate, RTAs, CDPs, as listed under (6) will be subject to a maximum cap of ₹ 5.00 million (plus applicable taxes). In case the total uploading charges/processing fees payable exceeds ₹ 5.00 million, then the amount payable to members of the Syndicate, RTAs, CDPs, Registered Brokers would be proportionately distributed based on the number of valid applications such that the total uploading charges / processing fees payable does not exceed ₹ 5.00 million.

All such commissions and processing fees set out above shall be paid as per the timelines in terms of the Syndicate Agreement and Cash Escrow and Sponsor Bank Agreement.

The processing fees for applications made by UPI Bidders may be released to the remitter banks (SCSBs) only after such banks provide a written confirmation on compliance with SEBI RTA Master Circular, in a format as prescribed by SEBI from time to time and in accordance with the SEBI ICDR Master Circular.

Interim use of Net Proceeds Pending utilization of the Net Proceeds for the purposes described above, we undertake to temporarily invest the funds from the Net Proceeds only with scheduled commercial banks. In accordance with Section 27 of the Companies Act 2013, our Company confirms that it shall not use the Net Proceeds for buying, trading or otherwise dealing in shares of any other listed company or for any investment in the equity markets.

No lien(s) shall be created on the funds laying in escrow accounts pending utilization of the proceeds of the Offer.

Monitoring of utilization of funds In terms of Regulation 41 of the SEBI ICDR Regulations, prior to filing this Prospectus with RoC, our Company has appointed CARE Ratings Limited, a SEBI registered credit agency as the Monitoring Agency to monitor the utilization of the Gross Proceeds as the Fresh Issue exceeds ₹ 1,000.00 million. Our Audit Committee and the Monitoring Agency will monitor the utilisation of the Gross Proceeds and Pre-IPO Proceeds and the Monitoring Agency shall submit the report required under Regulation 41(2) of the SEBI ICDR Regulations, on a quarterly 164basis, until such time as the Gross Proceeds and Pre-IPO Proceeds have been utilised in full. Our Company undertakes to place the report(s) of the Monitoring Agency on receipt before the Audit Committee without any delay. Our Company shall, for the purpose of quarterly reports to be issued by the Monitoring Agency, provide an item-by-item description for all the expense heads under each object of the Offer until the Gross Proceeds have been utilised in full.

Our Company will disclose and continue to disclose, the utilisation of the Gross Proceeds and Pre-IPO Proceeds, including interim use under a separate head in our balance sheet for such Fiscals as required under applicable law, clearly specifying the purposes for which the Gross Proceeds and Pre-IPO Proceeds have been utilised, till the time any part of the Gross Proceeds and Pre-IPO Proceeds remain unutilised. Our Company will also, in its balance sheet for the applicable Fiscals, provide details, if any, in relation to all such Gross Proceeds and Pre-IPO Proceeds that have not been utilised, if any, of such currently unutilised Gross Proceeds and Pre-IPO Proceeds. Further, our Company, on a quarterly basis, shall include the deployment of the Gross Proceeds and Pre-IPO Proceeds under various heads, as applicable, in the notes to our quarterly financial results. Our Company will indicate investments, if any, of unutilised Gross Proceeds and Pre-IPO Proceeds in the balance sheet of our Company for the relevant Fiscals subsequent to receipt of listing and trading approvals from the Stock Exchanges.

In accordance with Regulation 32(1) of the SEBI Listing Regulations, our Company shall furnish to the Stock Exchanges on a quarterly basis, a statement indicating (i) deviations, if any, in the actual utilisation of the proceeds of the Gross Proceeds and Pre-IPO Proceeds from the Objects as stated above; and (ii) details of category wise variations in the actual utilisation of the Gross Proceeds and Pre-IPO Proceeds from the Objects as stated above.

Pursuant to Regulation 32(3) and Part C of Schedule II, of the SEBI Listing Regulations, our Company shall, on a quarterly basis, disclose to the Audit Committee the uses and applications of the Gross Proceeds Pre-IPO Proceeds. The Audit Committee shall make recommendations to our Board for further action, if appropriate. On an annual basis, our Company shall prepare a statement of funds utilised for purposes other than those stated in this Prospectus and place it before the Audit Committee and make other disclosures as may be required until such time as the Gross Proceeds and Pre-IPO Proceeds remain unutilised. Such disclosure shall be made only until such time that all the Gross Proceeds and Pre-IPO Proceeds have been utilised in full. The statement shall be certified by the Statutory Auditors of our Company in accordance with Regulation 32(5) of SEBI Listing Regulations and such certification shall be provided to the Monitoring Agency.

Variation in the Objects In accordance with Sections 13(8) and 27 of the Companies Act 2013, our Company shall not vary the Objects unless our Company is authorized to do so by way of a special resolution of its Shareholders. In addition, the notice issued to the Shareholders in relation to the passing of such special resolution (“Notice”) shall specify the prescribed details and be published in accordance with the Companies Act 2013. The Notice shall simultaneously be published in the newspapers, one in English and one in Hindi, the vernacular language of the jurisdiction where our Registered Office is situated. Pursuant to Section 13(8) of the Companies Act 2013, the Promoters or Shareholders in control will be required to provide an exit opportunity to such Shareholders who do not agree to the proposal to vary the Objects, subject to the provisions of the Companies Act 2013 and in accordance with such terms and conditions, including in respect of pricing of the Equity Shares, in accordance with the Companies Act 2013 and the SEBI ICDR Regulations.

Appraising entity None of the Objects for which the Net Proceeds will be utilized have been appraised by any bank/ financial institution/ agency. For further details, see “Risk Factors – Any variation in the utilization of the Net Proceeds as disclosed in this Prospectus shall be subject to certain compliance requirements including prior approval of the shareholders of our Company” on page 86.

Other confirmations Except to the extent of any proceeds received pursuant to the sale of Offered Shares proposed to be sold in the Offer by the Promoter Selling Shareholder, no part of the Net Proceeds will be paid to our Promoters, member of the Promoter Group, Directors, Group Companies, Key Managerial Personnel or Senior Management. Our Company has neither entered into nor has planned to enter into any arrangement/ agreements/ transactions with our Promoters, member of the Promoter Group, Directors, Key Managerial Personnel, Senior Management or our Group Companies in relation to the utilization of the Net Proceeds. Further, there are no material existing or anticipated interest of such individuals and entities in the objects of the Offer except as set out above.

165BASIS FOR OFFER PRICE The Price Band and Offer Price has been determined by our Company in consultation with the Book Running Lead Managers, on the basis of assessment of market demand for the Equity Shares issued through the Book Building Process and on the basis of quantitative and qualitative factors as described below. The face value of the Equity Shares is ₹ 10 each and the Offer Price is 12.40 times the face value. Investors should refer to “Risk Factors”, “Our Business”, “Restated Consolidated Financial Information” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” on pages 37, 288, 383 and 539, respectively, to have an informed view before making an investment decision.

1. Qualitative Factors

Some of the qualitative factors which form the basis for computing the Offer Price are set forth below: • Advanced and vertically integrated precision manufacturing capabilities; • Operations in unique, engineering-led vertically-integrated precision manufacturing ecosystems;

• Manufacturing presence across three continents with strategic proximity to end customers; • Comprehensive precision product portfolio across high value segments; • Long-standing relationships with high entry barrier global customers; and • Founder-led business supported by an experienced management team and a qualified employee base.

For further details, see “Our Business – Our Strengths” on page 294, respectively.

2. Quantitative Factors Certain information presented below relating to us is based on the Restated Consolidated Financial Information.

For details, see “Restated Consolidated Financial Information” on page 383.

Some of the quantitative factors which may form the basis for calculating the Offer Price are as follows:

1. Restated Basic and diluted earnings per Equity Share, along with weighted average basic and diluted (“EPS”)#:

Year ended Basic EPS (₹) Diluted EPS (₹) Weight March 31, 2025 (1.80) (1.80) 3 March 31, 2024 (0.20) (0.20) 2 March 31, 2023 (2.44) (2.44) 1 Weighted Average (1.37) (1.37) - Six months period ended September 30, (0.30) (0.30) 2025 Six months period ended September 30, (1.26) (1.26) 2024 # Earnings per equity share for profit from discontinued & continuing operation attributable to owners of Aequs Limited (formerly known as Aequs Private Limited) (basic and diluted - in INR) (Nominal value per share: ₹ 10)

Notes:

1. Basic Earnings per share is calculated as Loss attributable to equity shareholders divided by Weighted average number of equity shares outstanding during the year/period.

2. Diluted Earnings per share is calculated as Loss attributable to equity shareholders divided by Weighted average number of equity shares outstanding during the year/period.

3. Weighted average: Aggregate of year wise weighted EPS divided by aggregate of Weights i.e., (EPS * Weights) for each year/period divided by the total of weights.

4. The figures above are derived from the Restated Consolidated Financial Information.

2. Price/Earning (“P/E”) ratio in relation to the Price Band of ₹ 118.00 to ₹ 124.00 per Equity Share:

Particulars P/E at the Floor Price P/E at the Cap Price (no. of times) (no. of times) Based on basic EPS as per the Restated NA* NA* Consolidated Financial Information for March 31, 2025 Based on diluted EPS as per the Restated NA* NA* Consolidated Financial Information for March 31, 2025 * Since the Basic and Diluted Earnings per Share for the financial year ended March 31, 2025 is negative, Price/Earning ratio is not ascertainable.

1663. Industry Peer Group P/E ratio:

Based on the peer group information (excluding our Company) given below in this section, the highest, lowest and industry average P/E ratio are set forth below:

Particulars P/E ratio Highest 417.03 Lowest 55.73 Average 148.69

Note: The highest and lowest industry P/E shown above is based on the peer set provided below under “- Comparison of accounting ratios with listed industry peers”. The industry average has been calculated as per the arithmetic average P/E of the peer set provided below under “- Comparison of accounting ratios with listed industry peers” below.

4. Return on Net Worth (“RoNW”) Financial Year ended RoNW (%) Weight March 31, 2025 (14.47) 3 March 31, 2024 (1.76) 2 March 31, 2023 (43.47) 1 Weighted Average RoNW (15.07) September 30, 2025 (2.13) September 30, 2024 (9.80)

Notes:

1. Return on Net Worth (%) is calculated as Loss for the year divided by the net worth as at the end of the year/period.

2. Net Worth, as per Regulation 2(1)(hh) of the SEBI ICDR Regulations, means the aggregate value of the paid-up share capital and all reserves created out of the profits and securities premium account and debit or credit balance of profit and loss account, after deducting the aggregate value of the accumulated losses, deferred expenditure and miscellaneous expenditure not written off, as per the restated statement of assets and liabilities, but does not include reserves created out of revaluation of assets, write-back of depreciation and amalgamation.

Further, Net worth is calculated by deducting the revaluation reserve and common control capital reserve from the equity attributable to owners of the Company. Equity attributable to owners of the Company comprises of equity share capital, instruments entirely equity in nature and other equity.

3. Weighted Average: Aggregate of year wise weighted Return on Net Worth divided by aggregate of Weights i.e., (Return on Net Worth * Weights) for each year divided by the total of weights

4. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535.

5. Net Asset Value per Equity Share Net Asset Value per Equity Share (₹) As on September 30, 2025# 13.60 As on March 31, 2025 12. 47 After the Offer - At the Floor Price(3) 24.63 - At the Cap Price(3) 24.74 At Offer Price 24.74 #Not annualised

Notes:

1. Net Asset Value per equity share represents Net Worth as at the end of the fiscal year/period, divided by the weighted average number of equity shares in calculating basic and diluted EPS for the year/period.

2. Net Worth, as per Regulation 2(1)(hh) of the SEBI ICDR Regulations, means the aggregate value of the paid-up share capital and all reserves created out of the profits and securities premium account and debit or credit balance of profit and loss account, after deducting the aggregate value of the accumulated losses, deferred expenditure and miscellaneous expenditure not written off, as per the restated statement of assets and liabilities, but does not include reserves created out of revaluation of assets, write-back of depreciation and amalgamation.

Further, Net worth is calculated by deducting the revaluation reserve and common control capital reserve from the equity attributable to owners of the Company. Equity attributable to owners of the Company comprises of equity share capital, instruments entirely equity in nature and other equity.

3. Net Asset Value per Equity Share after the Offer at floor price and cap price represents Net Worth as at September 30, 2025, as restated, plus the amount raised under Pre-IPO Placement and Fresh Issue divided by the weighted average number of equity shares in calculating basic and diluted EPS for the six months ended September 30, 2025 plus the number of Equity Shares issued under Pre-IPO Placement and number of Equity Shares issued under Fresh Issue calculated basis the Price Band and Employee Reservation and Employee Discount approved by the IPO Committee.

4. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535.

6. Comparison of accounting ratios with listed industry peers 167Name of the Revenue Face Closing P/E as EPS EPS Return on Net Asset Companies from Value per Price as on (Basic) (Diluted) Net Value per Operations Equity on Novemb (₹)# (₹)# Worth(%) Equity (₹ million) Share (₹) November er 21, Share (₹) 21, 2025 2025 Aequs Limited 9,246.06 10 NA NA** (1.80) (1.80) (14.47%) 12.47 Azad Engineering 4,573.54 2 1,693.00 115.48 14.66 14.66 6.21% 234.06 Limited Unimech Aerospace and Manufacturing 2,429.26 5 980.30 55.73 17.59 17.59 12.48% 141.01 Limited Amber Enterprises 99,730.16 10 7,196.00 100.40 72.01 71.67 10.99% 672.61 India Limited Kaynes Technology 27,212.52 10 5,883.50 129.59 45.82 45.40 10.33% 439.85 India Limited Dixon Technologies 3,88,601.00 2 14,965.00 73.87 205.70 202.58 47.50% 494.74

(India) Limited PTC Industries 3,080.74 10 17,236.00 417.03 41.37 41.33 4.40% 940.03 Limited All the financial information of our Company mentioned above has been derived from the Restated Consolidated Financial Information as at and for the financial year ended March 31, 2025.

** NA means not ascertainable as Basic and Diluted EPS for the year ended March 31, 2025 is negative. # Earnings per equity share for profit from discontinued & continuing operation attributable to owners of Aequs Limited (formerly known as Aequs Private Limited) (Basic and Diluted - in INR) (Nominal value per share: ₹ 10)

Notes:

1. P/E ratio has been computed based on the closing market price of equity shares as on November 21, 2025, divided by the Diluted EPS.

2. EPS of the peers is taken as disclosed in annual consolidated financials for Financial Year 2025, Diluted EPS refers to the diluted earnings per share of the respective company.

3. Return on Net Worth (%) is calculated as Loss for the year divided by the net worth as at the end of the year/period.

4. Net asset value per Equity Share represents Net Worth as at the end of the year/period divided by weighted average number of Equity Shares considered for calculating basic and diluted EPS for the year/period.

5. Net Worth, as per Regulation 2(1)(hh) of the SEBI ICDR Regulations, means the aggregate value of the paid-up share capital and all reserves created out of the profits and securities premium account and debit or credit balance of profit and loss account, after deducting the aggregate value of the accumulated losses, deferred expenditure and miscellaneous expenditure not written off, as per the restated statement of assets and liabilities, but does not include reserves created out of revaluation of assets, write-back of depreciation and amalgamation.

Further, Net worth is calculated by deducting the revaluation reserve and common control capital reserve from the equity attributable to owners of the Company. Equity attributable to owners of the Company comprises of equity share capital, instruments entirely equity in nature and other equity.

6. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535.

Key Performance and Financial Indicators (“KPIs”) The KPIs disclosed below have been used historically by our Company to understand and analyze our business performance, which in result, help us in analyzing the growth of business in comparison to our peers. Our Company considers that the KPIs set forth below are the ones that may have a bearing for arriving at the basis for the Offer Price. The Bidders can refer to the below-mentioned KPIs, being a combination of key financial and operational metrics, to make an assessment of our Company’s performance in various business verticals and make an informed decision. All the KPIs disclosed below have been approved and confirmed by a resolution of our Audit Committee dated November 26, 2025. The management and the members of the Audit Committee have confirmed that the KPIs disclosed below have been identified and disclosed in accordance with the SEBI ICDR Regulations and the industry standards on key performance indicators disclosures in the draft offer document and offer document. Further, the management and the Audit Committee has confirmed that the verified and audited details of all the KPIs pertaining to our Company that have been disclosed to earlier investors at any point of time during the three years period prior to the filing of this Prospectus have been disclosed in this section. Further, the Audit Committee have also confirmed that there are no KPIs pertaining to our Company that have been disclosed to our Promoters, members of Promoter Group, Employees or Directors of our Company and Subsidiaries in their capacity as a shareholder of the Company at any point of time during the three years prior to the filing of this Prospectus .

Further, the KPIs disclosed herein have been certified by Manian & Rao, Chartered Accountants (FRN No.

001983S), by their certificate dated November 26, 2025, which has been included as part of the “Material Contracts and Documents for Inspection” on page 681.

For details of our other operating metrics disclosed elsewhere in this Prospectus, see “Our Business”, and “Management’s Discussion and Analysis of Financial Position and Results of Operations” on pages 288 and 539, respectively. We have described and defined the KPIs, as applicable, in “Definitions and Abbreviations – Technical and Industry Related Terms” on page 15. Bidders are encouraged to review the Ind AS financial 168measures and not to rely on any single financial or operational metric to evaluate our business.

Our Company confirms that it shall continue to disclose all the KPIs included in this section on a periodic basis, at least once in a year (or any lesser period as determined by our Board of our Company), until the later of (a) one year after the date of listing of the Equity Shares on the Stock Exchanges; and (ii) complete utilisation of the proceeds of the Offer as disclosed in “Objects of the Offer” on page 147, or for such other duration as may be required under the SEBI ICDR Regulations.

The list of our KPIs along with brief explanation of the relevance of the KPI for our business operations are set forth below.

Description on the historic use of the KPIs by our Company to analyse, track or monitor the operational and/or financial performance of our Company In evaluating our business, we consider and use certain KPIs, as presented below, as a supplemental measure to review and assess our financial and operating performance. The presentation of these KPIs is not intended to be considered in isolation or as a substitute for the Restated Consolidated Financial Information. Some of these KPIs are not defined under Ind AS and are not presented in accordance with Ind AS. These KPIs have limitations as analytical tools. Further, these KPIs may differ from the similar information used by other companies, including peer companies, and hence their comparability may be limited. Therefore, these KPIs should not be considered in isolation or construed as an alternative to Ind AS measures or as an indicator of our operating performance, liquidity, profitability or results of operation. Although these KPIs are not a measure of performance calculated in accordance with applicable accounting standards, our Company’s management believes that it provides an additional tool for investors to use in evaluating our operating results and trends and in comparing our financial results with other companies in our industry.

Key Performance S. No Units Explanation for the KPI Indicator

1. Revenue from ₹ in Revenue from Operations is used to track the revenue profile of the Operations million continuing business and the overall financial performance and size of the company.

2. Year on Year growth in % Revenue growth provides information regarding the growth of our Revenue from business for the respective period Operations

3. Net external revenue – ₹ in Net External Revenue – Aerospace Segment is used by our management Aerospace Segment million to track the revenue profile of the Aerospace Segment and helps assess the financial performance of the Aerospace Segment

4. Net external revenue – ₹ in Net External Revenue – Consumer Segment is used by our management Consumer Segment million to track the revenue profile of the Consumer Segment and helps assess the financial performance of the Consumer Segment

5. Loss for the year ₹ in Loss for the year provides information regarding the overall profitability million of the continuing business

6. Total Assets ₹ in Key indicator of the company’s financial base and capacity to support million operations and growth

7. EBITDA ₹ in EBITDA provides information regarding the operational efficiency of the million business

8. EBITDA Margin % EBITDA Margin is an indicator of the operational profitability and financial performance of our business

9. EBITDA - Aerospace ₹ in Aerospace and Consumer Segments have distinct cost structures and Segment million profitability profiles. Disclosing segment-wise EBITDA provides better visibility into operational efficiency and each segment’s contribution to overall profitability

10. EBITDA - Aerospace % Aerospace Segment Margin reflect the underlying efficiency and Segment Margin % profitability of aerospace business

11. EBITDA - Consumer ₹ in Aerospace and Consumer Segments have distinct cost structures and Segment million profitability profiles. Disclosing segment-wise EBITDA provides better visibility into operational efficiency and each segment’s contribution to overall profitability

12. EBITDA - Consumer % Consumer Segment Margin reflect the underlying efficiency and Segment Margin % profitability of consumer business

13. PAT margin % PAT Margin is an indicator of the overall profitability and financial performance of the continuing business 169Key Performance S. No Units Explanation for the KPI Indicator

14. Cash Conversion Number Given the nature of business, cash conversion cycle is a key metric to Cycle Days of days assess operational performance and financial health of the business.

15. Return on Capital % Return on capital employed provides how efficiently our Company Employed generates earnings from the capital employed in the business.

16. Return on Equity % Return on Equity provides how efficiently our Company generates earnings from the Equity in the business.

17. Net Debt to Equity Times Important metric to assess the company's creditworthiness and financial Ratio stability.

18. Fixed Asset Turnover Times Measures how efficiently the company is utilizing its fixed assets to generate revenue from its core operations

19. Consolidated Installed Hours per Installed capacity is an important metric and reflects the operational Capacity (in annum capacity of the business machining/ molding hours)

20. Capacity utilization % Capacity utilisation is an important metric and reflects what % of (per annum) capacity is being put to use. This shows economies of the scale the company is being able to achieve along with better absorption of fixed cost.

170Details of our KPIs as at/ for the six months period ended September 30, 2025 and September 30, 2024 and for the Fiscal Years ended March 31, 2025, March 31, 2024 and March 31, 2023 Key Units As at September 30 As of and for the Fiscal ended Performance 2025 2024 March 31, 2025 March 31, 2024 March 31, 2023 Indicator Revenue ₹ in million 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 from Operations (1) Year on Year % 17.03 NA (4.19) 18.83 53.48 growth in Revenue from Operations (2) Net external ₹ in million 4,739.53 3,947.23 8,246.41 7,569.78 5,851.82 revenue – Aerospace Segment (3) Net external ₹ in million 632.06 642.50 999.65 2,080.96 2,269.50 revenue – Consumer Segment (4) Loss for the ₹ in million (169.77) (717.00) (1,023.46) (142.44) (1,094.95) year(5) Total Assets ₹ in million 21,343.51 18,635.00 18,598.40 18,229.83 13,216.91

(6) EBITDA (7) ₹ in million 841.06 578.22 1,079.69 1,455.10 630.56 EBITDA % 15.66 12.60 11.68 15.08 7.76 Margin (8) EBITDA - ₹ in million 1,169.61 872.48 1,597.75 1,743.73 833.59 Aerospace Segment (9) EBITDA - % 24.68 22.10 19.38 23.04 14.24 Aerospace Segment Margin (10) EBITDA - ₹ in million (151.10) (190.82) (286.71) (155.68) (155.50) Consumer Segment (11) EBITDA - % (23.91) (29.70) (28.68) (7.48) (6.85) Consumer 171Key Units As at September 30 As of and for the Fiscal ended Performance 2025 2024 March 31, 2025 March 31, 2024 March 31, 2023 Indicator Segment Margin (12) PAT margin % (3.16) (15.62) (11.07) (1.48) (13.48)

(13) Cash Number of days 232 293 253 203 157 Conversion Cycle (in Days) (14) Return on % 1.81 0.67 0.87 2.84 (3.72) Capital Employed (15) Return on % (2.07) (9.68) (14.30) (1.49) (40.68) Equity (16) Net Debt to Times 0.98 0.86 0.99 0.55 2.54 Equity Ratio

(17) Fixed Asset Times 0.75 0.82 1.84 1.65 1.36 Turnover (18) Consolidated Hours per annum 1,457,184.00 1,365,574.00 2,919,058.00 2,868,185.00 2,799,736.00 Installed Capacity (in machining/ molding hours) (19) Capacity % 43.63 44.47 41.77 44.40 39.19 utilization (per annum)

(20)

Notes:

(1) Revenue from Operations is as per the Restated Consolidated Financial Information

(2) Percentage growth in Revenue from Operations for the relevant Fiscal over Revenue from Operations for the immediately preceding Fiscal/period.

(3) Net external revenue – Aerospace Segment is as per the Restated Consolidated Financial Information

(4) Net external revenue – Consumer Segment is as per the Restated Consolidated Financial Information

(5) Loss for the year for the respective fiscals is as per the Restated Consolidated Financial Information

(6) Total Assets is as per the Restated Consolidated Financial Information

(7) EBITDA is calculated as Loss for the year as per restated consolidated statement of profit and loss plus (i) Total tax expenses; (ii) finance costs; and (iii) depreciation and amortisation expense adjusted for (iv) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; (v) exceptional items gain/(loss); and (vi) (Loss) / profit from discontinued operations before tax.

(8) EBITDA Margin is calculated as EBITDA as a percentage of Revenue from Operations.

(9) EBITDA - Aerospace Segment is calculated as Profit / (Loss) before tax for the year for Aerospace Segment plus (i) finance costs; and (ii)depreciation and amortisation expense adjusted for (iii) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; and (iv) Exceptional items gain/(loss); of the Aerospace segment as per the Segment Reporting in the Restated Consolidated Financial Information 172(10) EBITDA - Aerospace Segment Margin % - EBITDA- Aerospace Segment as a percentage of Net External Revenue of the Aerospace Segment as per the segment reporting in the Restated Consolidated Financial Information.

(11) EBITDA - Consumer Segment is calculated as Profit / (Loss) for the year before tax for Consumer Segment plus (i) finance costs; and (ii) depreciation and amortisation expense adjusted for (iii) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; and (iv) exceptional items gain/(loss); of the Consumer segment as per the segment reporting in the Restated Consolidated Financial Information

(12) EBITDA Consumer Segment Margin % - EBITDA- Consumer Segment as a percentage of Net External Revenue of the Consumer Segment as per the segment reporting in the Restated Consolidated Financial Information.

(13) PAT Margin is calculated as Loss for the year/period for the respective fiscals/periods as a percentage of Revenue from Operations for respective fiscals/period.

(14) Cash Conversion Cycle (in days) is calculated as aggregate of Trade receivables days and Inventory days as reduced by trade payables days. - Trade receivables days is calculated as outstanding trade receivables at the end of fiscal/period divided by revenue from operations for the year/period multiplied by 183/ 365 days.

- Inventory days is calculated as inventory at the end of fiscal/period divided by cost of goods sold for the year multiplied by 183/ 365 days. The cost of goods sold is aggregate of cost of raw material consumed, purchases of stock-in-trade and changes in inventories of finished goods and work-in-progress.

- Trade payable days is calculated as outstanding trade payables at the end of fiscal divided by aggregate of Purchase of Raw Materials and Purchases of stock-in-trade for the year/period multiplied by 183/ 365 days.

(15) Return on Capital Employed is calculated as Earnings Before Interest and Tax as a percentage of Capital Employed - Earnings Before Interest and Tax is calculated as Loss before tax from continuing operations as adjusted to Exceptional items gain / (loss), and Finance costs.

- Capital Employed is the sum of Total Equity, Non-Current & Current Borrowings and Non-Current and Current lease Liabilities.

(16) Return on Equity is calculated as Loss from continuing operations as a percentage of Total Equity as per the Restated Consolidated Financial Information.

(17) Net Debt to Equity ratio for the relevant fiscals. Net debt is calculated as non-current borrowings plus current borrowings plus non-current lease liabilities plus current lease liabilities less cash and cash equivalents less bank balances other than cash and cash equivalent.

(18) Fixed Asset Turn Over Ratio is calculated as Revenue from Operations divided by Total Fixed Assets. Total Fixed assets comprise of Property, plant & equipment and Right of Use Assets.

(19) Installed Capacity (in machining/ molding hours) is the capacity available at the manufacturing facilities of the Company and subsidiaries at the end of the given year/period as certified by independent chartered engineers, Vishvakarma Consultancy Services Private Limited (formerly known as Vishvakarma Consultants).

(20) Capacity utilization is calculated as Actual Production (in machining hours) as a percentage of Installed Capacity (in machining/ molding hours) as certified by independent chartered engineers, Vishvakarma Consultancy Services Private Limited (formerly known as Vishwakarma Consultants).

(21) For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535

1737. Comparison of KPIs with listed industry peers The peer group has been determined on the basis of companies listed on Indian stock exchanges, whose business profile is comparable to our businesses in terms of our business

model: While the listed peers mentioned below operate in the same industry as us, and may have similar offerings, our business may be different in terms of differing business models, different product verticals serviced or focus areas or different geographical presence.

Set forth below is a comparison of our KPIs with our peer group companies listed in India:

Partic ulars Un it Aequs Limited Azad Engineering Limited As of and As of and As of and As of and As of and As of and As of and As of and As of and As of and for the six for the six for the for the for the for the six for the six for the for the for the months months Fiscal Fiscal Fiscal months months Fiscal Fiscal Fiscal period period ended ended ended period period ended ended ended ended ended March 31, March 31, March 31, ended ended March 31, March 31, March 31, September September 2025 2024 2023 September September 2025 2024 2023 30, 2025 30, 2024 30, 2025 30, 2024 Revenue ₹ in million 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 2,827.17 2,099.44 4,573.54 3,407.71 2,516.75 from Operations Year on % 17.03 NA (4.19) 18.83% 53.48 34.66 N.A. 34.21 35.40 29.42 Year growth in Revenue from Operations Net external ₹ in million 4,739.53 3,947.23 8,246.41 7,569.78 5,851.82 N.A. N.A. N.A. N.A. N.A.

revenue – Aerospace Segment Net external ₹ in million 632.06 642.50 999.65 2,080.96 2,269.50 N.A. N.A. N.A. N.A. N.A. revenue – Consumer Segment Loss for the ₹ in million (169.77) (717.00) (1,023.46) (142.44) (1,094.95) 620.41 380.05 865.34 585.80 84.73 year Total Assets ₹ in million 21,343.51 18,635.00 18,598.40 18,229.83 13,216.91 19,554.64 9,728.79 18,606.98 7,970.79 5,892.08 EBITDA ₹ in million 841.06 578.22 1,079.69 1,455.10 630.56 NA NA 1,613.10 1,165.90 723.10 EBITDA % 15.66 12.60 11.68 15.08 7.76 N.A. N.A. 35.27 34.21 28.73 Margin EBITDA - ₹ in million 1,169.61 872.48 1,597.75 1,743.73 833.59 N.A. N.A. N.A. N.A. N.A.

Aerospace Segment 174Partic ulars Un it Aequs Limited Azad Engineering Limited As of and As of and As of and As of and As of and As of and As of and As of and As of and As of and for the six for the six for the for the for the for the six for the six for the for the for the months months Fiscal Fiscal Fiscal months months Fiscal Fiscal Fiscal period period ended ended ended period period ended ended ended ended ended March 31, March 31, March 31, ended ended March 31, March 31, March 31, September September 2025 2024 2023 September September 2025 2024 2023 30, 2025 30, 2024 30, 2025 30, 2024 EBITDA - % 24.68 22.10 19.38 23.04 14.24 N.A. N.A. N.A. N.A. N.A.

Aerospace Segment Margin EBITDA - ₹ in million (151.10) (190.82) (286.71) (155.68) (155.50) N.A. N.A. N.A. N.A. N.A.

Consumer Segment EBITDA - % (23.91) (29.70) (28.68) (7.48) (6.85) N.A. N.A. N.A. N.A. N.A.

Consumer Segment Margin PAT margin % (3.16) (15.62) (11.07) (1.48) (13.48) 21.94 18.10 18.92% 17.19 3.37 Cash Number of 232 293 253 203 157 N.A. N.A. N.A. 220 179 Conversion days Cycle Days Return on % 1.81 0.67 0.87 2.84 (3.72) N.A. N.A. 11.30 19.00 12.99 Capital Employed Return on % (2.07) (9.68) (14.30) (1.49) (40.68) N.A. N.A. N.A. N.A. N.A.

Equity Net Debt to Times 0.98 0.86 0.99 0.55 2.54 N.A. N.A. N.A. 0.00 1.22 Equity Ratio Fixed Asset Times 0.75 0.82 1.84 1.65 1.36 N.A. N.A. N.A. N.A. N.A.

Turnover Consolidate Hours per 1,457,184.00 1,365,574.00 2,919,058.00 2,868,185.00 2,799,736.00 N.A. N.A. N.A. 600,000.00 579,814.00 d Installed annum Capacity (in machining/ molding hours) Capacity % 43.63 44.47 41.77 44.40 39.19 N.A. N.A. N.A. 88.51 86.23 utilization (per annum) 175Aequs Limited Particulars Unit Unimech Aerospace and Manufacturing Limited As of and As of and As of and As of and As of and As of and As of and As of and As of and As of and for the six for the six for the six for the six for the for the for the for the for the for the months months months months Fiscal Fiscal Fiscal Fiscal Fiscal Fiscal period period period period ended ended ended ended ended ended ended ended ended ended March 31, March 31, March 31, March 31, March 31, March 31, September September September September 2025 2024 2023 2025 2024 2023 30, 2025 30, 2024 30, 2025 30, 2024 Revenue ₹ in million 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 1,249,70 1,206.56 2,429.26 2,087.75 941.66 from Operations Year on % 17.03 NA (4.19) 18.83 53.48 3.58% N.A. 16.36% 121.71 159.06 Year growth in Revenue from Operations Net external ₹ in million 4,739.53 3,947.23 8,246.41 7,569.78 5,851.82 N.A. N.A. N.A. N.A. N.A.

revenue – Aerospace Segment Net external ₹ in million 632.06 642.50 999.65 2,080.96 2,269.50 N.A. N.A. N.A. N.A. N.A. revenue – Consumer Segment Loss for the ₹ in million (169.77) (717.00) (1,023.46) (142.44) (1,094.95) 347.95 386.81 834.57 581.34 228.13 year Total Assets ₹ in million 21,343.51 18,635.00 18,598.40 18,229.83 13,216.91 8,702.42 8,072.55 1,756.34 933.41 EBITDA ₹ in million 841.06 578.22 1,079.69 1,455.10 630.56 383.40 488.50 920.60 791.86 345.63 EBITDA % 15.66 12.60 11.68 15.08 7.76 30.68 40.49 37.90 37.93 36.70 Margin EBITDA - ₹ in million 1,169.61 872.48 1,597.75 1,743.73 N.A. N.A. N.A. N.A. N.A.

Aerospace 833.59 Segment EBITDA - % 24.68 22.10 19.38 23.04 14.24 N.A. N.A. N.A. N.A. N.A.

Aerospace Segment Margin EBITDA - ₹ in million (151.10) (190.82) (286.71) (155.68) (155.50) N.A. N.A. N.A. N.A. N.A.

Consumer Segment 176Aequs Limited Particulars Unit Unimech Aerospace and Manufacturing Limited As of and As of and As of and As of and As of and As of and As of and As of and As of and As of and for the six for the six for the six for the six for the for the for the for the for the for the months months months months Fiscal Fiscal Fiscal Fiscal Fiscal Fiscal period period period period ended ended ended ended ended ended ended ended ended ended March 31, March 31, March 31, March 31, March 31, March 31, September September September September 2025 2024 2023 2025 2024 2023 30, 2025 30, 2024 30, 2025 30, 2024 EBITDA - % (23.91) (29.70) (28.68) (7.48) (6.85) N.A. N.A. N.A. N.A. N.A.

Consumer Segment Margin PAT margin % (3.16) (15.62) (11.07) (1.48) (13.48) 27.84 32.06 34.35 27.85 24.23 Cash Number of 232 293 253 203 157 N.A. N.A. N.A. 117 275 Conversion days Cycle Days Return on % 1.81 0.67 0.87 2.84 (3.72) 6.50 19.50 25.16 54.36 42.87 Capital Employed Return on % (2.07) (9.68) (14.30) (1.49) (40.68) 9.90 19.80 33.08 53.53 46.70 Equity Net Debt to Times 0.98 0.86 0.99 0.55 2.54 NA NA 0.11 N.A. N.A.

Equity Ratio Fixed Asset Times 0.75 0.82 1.84 1.65 1.36 1.90 4.90 2.30 5.16 3.51 Turnover Consolidate Hours per 1,457,184.00 1,365,574.00 2,919,058.00 2,868,185.00 2,799,736.00 N.A. N.A. 633,840.00 222,990.00 125,100.00 d Installed annum Capacity (in machining/ molding hours) Capacity % 43.63 44.47 41.77 44.40 39.19 N.A. N.A. 57.00 N.A. N.A.

utilization (per annum) 177Aequs Limited Particulars Unit Amber Enterprises India Limited As of and As of and As of and As of and As of and As of and As of and As of and As of and As of and for the six for the six for the six for the six for the for the for the for the for the for the months months months months Fiscal Fiscal Fiscal Fiscal Fiscal Fiscal period period period period ended ended ended ended ended ended ended ended ended ended March 31, March 31, March 31, March 31, March 31, March 31, September September September September 2025 2024 2023 2025 2024 2023 30, 2025 30, 2024 30, 2025 30, 2024 Revenue ₹ in million 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 50,960.00 40,860.00 99,730.16 67,292.69 69,270.95 from Operations Year on % 17.03 NA (4.19) 18.83 53.48 24.72 N.A. 48.20 (2.86) 64.68 Year growth in Revenue from Operations Net external ₹ in million 4,739.53 3,947.23 8,246.41 7,569.78 5,851.82 N.A. N.A. N.A. N.A. N.A.

revenue – Aerospace Segment Net external ₹ in million 632.06 642.50 999.65 2,080.96 2,269.50 N.A. N.A. N.A. N.A. N.A. revenue – Consumer Segment Loss for the ₹ in million (169.77) (717.00) (1,023.46) (142.44) (1,094.95) 740.00 960.00 2,511.51 1,394.67 1,637.76 year Total Assets ₹ in million 21,343.51 18,635.00 18,598.40 18,229.83 13,216.91 91,440.00 64,270.00 84,280.98 65,931.98 62,433.24 EBITDA ₹ in million 841.06 578.22 1,079.69 1,455.10 630.56 3,610.00 3,200.00 7,960.00 5,190.00 4,750.00 EBITDA % 15.66 12.60 11.68 15.08 7.76 7.10 7.80 7.98 7.71 6.86 Margin EBITDA - ₹ in million 1,169.61 872.48 1,597.75 1,743.73 833.59 N.A. N.A. N.A. N.A. N.A.

Aerospace Segment EBITDA - % 24.68 22.10 19.38 23.04 14.24 N.A. N.A. N.A. N.A. N.A.

Aerospace Segment Margin EBITDA - ₹ in million (151.10) (190.82) (286.71) (155.68) (155.50) N.A. N.A. N.A. N.A. N.A.

Consumer Segment 178Aequs Limited Particulars Unit Amber Enterprises India Limited As of and As of and As of and As of and As of and As of and As of and As of and As of and As of and for the six for the six for the six for the six for the for the for the for the for the for the months months months months Fiscal Fiscal Fiscal Fiscal Fiscal Fiscal period period period period ended ended ended ended ended ended ended ended ended ended March 31, March 31, March 31, March 31, March 31, March 31, September September September September 2025 2024 2023 2025 2024 2023 30, 2025 30, 2024 30, 2025 30, 2024 EBITDA - % (23.91) (29.70) (28.68) (7.48) (6.85) N.A. N.A. N.A. N.A. N.A.

Consumer Segment Margin PAT margin % (3.16) (15.62) (11.07) (1.48) (13.48) 1.40 2.30 2.52 2.07 2.36 Cash Number of 232 293 253 203 157 N.A. N.A. N.A. N.A. N.A.

Conversion days Cycle Days Return on % 1.81 0.67 0.87 2.84 (3.72) N.A. N.A. 19.50 12.61 15.00 Capital Employed Return on % (2.07) (9.68) (14.30) (1.49) (40.68) N.A. N.A. 11.30 6.90 8.80 Equity Net Debt to Times 0.98 0.86 0.99 0.55 2.54 N.A. N.A. 0.34 0.29 0.30 Equity Ratio Fixed Asset Times 0.75 0.82 1.84 1.65 1.36 N.A. N.A. N.A. N.A. N.A.

Turnover Consolidated Hours per 1,457,184.00 1,365,574.00 2,919,058.00 2,868,185.00 2,799,736.00 N.A. N.A. N.A. N.A. N.A.

Installed annum Capacity (in machining/ molding hours) Capacity % 43.63 44.47 41.77 44.40 39.19 N.A. N.A. N.A. N.A. N.A. utilization (per annum) 179Aequs Limited Particulars Unit Kaynes Technology India Limited As of and As of and As of and As of and As of and As of and As of and As of and As of and As of and for the six for the six for the six for the six for the for the for the for the for the for the months months months months Fiscal Fiscal Fiscal Fiscal Fiscal Fiscal period period period period ended ended ended ended ended ended ended ended ended ended March 31, March 31, March 31, March 31, March 31, March 31, September September September September 2025 2024 2023 2025 2024 2023 30, 2025 30, 2024 30, 2025 30, 2024 Revenue ₹ in million 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 15,796.84 10,760.94 27,212.52 18,046.19 11,261.14 from Operations Year on % 17.03 N.A. (4.19) 18.83 53.48 46.80 N.A. 50.79 60.25 59.45 Year growth in Revenue from Operations Net external ₹ in million 4,739.53 3,947.23 8,246.41 7,569.78 5,851.82 N.A. N.A. N.A. N.A. N.A.

revenue – Aerospace Segment Net external ₹ in million 632.06 642.50 999.65 2,080.96 2,269.50 N.A. N.A. N.A. N.A. N.A. revenue – Consumer Segment Loss for the ₹ in million (169.77) (717.00) (1,023.46) (142.44) (1,094.95) 1,960.26 1,109.85 2,934.33 1,832.89 951.96 year Total Assets ₹ in million 21,343.51 18,635.00 18,598.40 18,229.83 13,216.91 67,333.41 37,962.39 46,412.17 32,651.77 14,187.32 EBITDA ₹ in million 841.06 578.22 1,079.69 1,455.10 630.56 2,610.00 1,490.00 4,107.00 2,542.00 1,683.00 EBITDA % 15.66 12.60 11.68 15.08 7.76 16.50 13.80 15.09 14.09 14.95 Margin EBITDA - ₹ in million 1,169.61 872.48 1,597.75 1,743.73 833.59 N.A. N.A. N.A. N.A. N.A.

Aerospace Segment EBITDA - % 24.68 22.10 19.38 23.04 14.24 N.A. N.A. N.A. N.A. N.A.

Aerospace Segment Margin EBITDA - ₹ in million (151.10) (190.82) (286.71) (155.68) (155.50) N.A. N.A. N.A. N.A. N.A.

Consumer Segment 180Aequs Limited Particulars Unit Kaynes Technology India Limited As of and As of and As of and As of and As of and As of and As of and As of and As of and As of and for the six for the six for the six for the six for the for the for the for the for the for the months months months months Fiscal Fiscal Fiscal Fiscal Fiscal Fiscal period period period period ended ended ended ended ended ended ended ended ended ended March 31, March 31, March 31, March 31, March 31, March 31, September September September September 2025 2024 2023 2025 2024 2023 30, 2025 30, 2024 30, 2025 30, 2024 EBITDA - % (23.91) (29.70) (28.68) (7.48) (6.85) N.A. N.A. N.A. N.A. N.A.

Consumer Segment Margin PAT margin % (3.16) (15.62) (11.07) (1.48) (13.48) 12.41 10.31 10.78 10.16 8.45 Cash Number of 232 293 253 203 157 N.A. N.A. N.A. N.A.

Conversion days N.A.

Cycle Days Return on % 1.81 0.67 0.87 2.84 (3.72) 16.70 18.60 19.20 22.00 24.20 Capital Employed Return on % (2.07) (9.68) (14.30) (1.49) (40.68) 14.20 17.60 19.40 22.80 24.90 Equity Net Debt to Times 0.98 0.86 0.99 0.55 2.54 0.10 0.20 0.20 0.10 0.05 Equity Ratio Fixed Asset Times 0.75 0.82 1.84 1.65 1.36 N.A. N.A. N.A.

Turnover N.A. N.A.

Consolidate Hours per 1,457,184.00 1,365,574.00 2,919,058.00 2,868,185.00 2,799,736.00 N.A. N.A. N.A. N.A. N.A. d Installed annum Capacity (in machining/ molding hours) Capacity % 43.63 44.47 41.77 44.40 39.19 N.A. N.A. N.A. N.A. N.A.

utilization (per annum) 181Aequs Limited Particulars Unit Dixon Technologies (India) Limited As of and As of and As of and As of and As of and As of and As of and As of and As of and As of and for the six for the six for the for the for the for the six for the six for the for the for the months months Fiscal Fiscal Fiscal months months Fiscal Fiscal Fiscal period period ended Ended Ended period period ended Ended Ended ended ended March 31, March 31, March 31, ended ended March 31, March 31, March 31, September September 2025 2024 2023 September September 2025 2024 2023 30, 2025 30, 2024 30, 2025 30, 2024 Revenue ₹ in million 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 2,76,907.00 1,81,138.80 3,88,601.00 1,76,909.00 1,21,920.10 from Operations Year on % 17.03 NA (4.19) 18.83 53.48 52.87 N.A. 119.66 45.10 13.98 Year growth in Revenue from Operations Net external ₹ in million 4,739.53 3,947.23 8,246.41 7,569.78 5,851.82 N.A. N.A. N.A. N.A. N.A.

revenue – Aerospace Segment Net external ₹ in million 632.06 642.50 999.65 2,080.96 2,269.50 N.A. N.A. N.A. N.A. N.A. revenue – Consumer Segment Loss for the ₹ in million (169.77) (717.00) (1,023.46) (142.44) (1,094.95) 10,257.20 5,514.00 12,325.80 3,749.20 2,550.80 year Total Assets ₹ in million 21,343.51 18,635.00 18,598.40 18,229.83 13,216.91 1,96,505.20 1,61,206.80 1,67,668.70 69,914.50 46,794.30 EBITDA ₹ in million 841.06 578.22 1,079.69 1,455.10 630.56 15,410.00 6,760.00 15,278.00 7,202.00 5,184.00 EBITDA % 15.66 12.60 11.68 15.08 7.76 5.60 3.70 3.93 4.07 4.25 Margin EBITDA - ₹ in million 1,169.61 872.48 1,597.75 1,743.73 833.59 N.A. N.A. N.A. N.A. N.A.

Aerospace Segment EBITDA - % 24.68 22.10 19.38 23.04 14.24 N.A. N.A. N.A. N.A. N.A.

Aerospace Segment Margin EBITDA - ₹ in million (151.10) (190.82) (286.71) (155.68) (155.50) N.A. N.A. N.A. N.A. N.A.

Consumer Segment 182Aequs Limited Particulars Unit Dixon Technologies (India) Limited As of and As of and As of and As of and As of and As of and As of and As of and As of and As of and for the six for the six for the for the for the for the six for the six for the for the for the months months Fiscal Fiscal Fiscal months months Fiscal Fiscal Fiscal period period ended Ended Ended period period ended Ended Ended ended ended March 31, March 31, March 31, ended ended March 31, March 31, March 31, September September 2025 2024 2023 September September 2025 2024 2023 30, 2025 30, 2024 30, 2025 30, 2024 EBITDA - % (23.91) (29.70) (28.68) (7.48) (6.85) N.A. N.A. N.A. N.A. N.A.

Consumer Segment Margin PAT margin % (3.16) (15.62) (11.07) (1.48) (13.48) (3.70) (3.04) 3.17 2.12 2.09 Cash Number of 232 293 253 203 157 N.A. N.A. N.A. N.A. N.A.

Conversion days Cycle Days Return on % 1.81 0.67 0.87 2.84 (3.72) N.A. N.A. 48.50 38.00 33.40 Capital Employed Return on % (2.07) (9.68) (14.30) (1.49) (40.68) N.A. N.A. 47.50 25.20 22.40 Equity Net Debt to Times 0.98 0.86 0.99 0.55 2.54 N.A. N.A. (0.02) (0.03) (0.05) Equity Ratio Fixed Asset Times 0.75 0.82 1.84 1.65 1.36 N.A. N.A. N.A. N.A. N.A.

Turnover Consolidate Hours per 1,457,184.00 1,365,574.00 2,919,058.00 2,868,185.00 2,799,736.00 N.A. N.A. N.A. N.A. N.A. d Installed annum Capacity (in machining/ molding hours) Capacity % 43.63 44.47 41.77 44.40 39.19 N.A. N.A. N.A. N.A. N.A.

utilization (per annum) 183Aequs Limited Particulars Unit PTC Industries Limited As of and for As of and for As of and As of and for As of and for As of and As of and for As of and As of and for As of and for the six the six for the the Fiscal the Fiscal for the six the six for the the Fiscal the Fiscal months months Fiscal ended Ended Ended months months Fiscal ended Ended Ended period ended period ended March 31, March 31, March 31, period period ended March 31, March 31, March 31, September September 2025 2024 2023 ended September 2025 2024 2023 30, 2025 30, 2024 September 30, 2024 30, 2025 Revenue ₹ in million 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 2,217.22 1,192.33 3,080.74 2,568.79 2,192.62 from Operations Year on Year % 17.03 N.A. (4.19) 18.83 53.48 86.00 N.A. 19.93 17.16 22.52 growth in Revenue from Operations Net external ₹ in million 4,739.53 3,947.23 8,246.41 7,569.78 5,851.82 N.A. N.A. N.A. N.A. N.A.

revenue – Aerospace Segment Net external ₹ in million 632.06 642.50 999.65 2,080.96 2,269.50 N.A. N.A. N.A. N.A. N.A. revenue – Consumer Segment Loss for the ₹ in million (169.77) (717.00) (1,023.46) (142.44) (1,094.95) 232.94 222.02 610.19 422.16 258.15 year Total Assets ₹ in million 21,343.51 18,635.00 18,598.40 18,229.83 13,216.91 17, 460.77 15,281.25 15,838.37 8,956.85 5,529.13 EBITDA ₹ in million 841.06 578.22 1,079.69 1,455.10 630.56 N.A. N.A. 1,094.00 860.00 661.00 EBITDA % 15.66 12.60 11.68 15.08 7.76 N.A. N.A. 35.51 33.48 30.15 Margin EBITDA - ₹ in million 1,169.61 872.48 1,597.75 1,743.73 833.59 N.A. N.A. N.A. N.A. N.A.

Aerospace Segment EBITDA - % 24.68 22.10 19.38 23.04 14.24 N.A. N.A. N.A. N.A. N.A.

Aerospace Segment Margin EBITDA - ₹ in million (151.10) (190.82) (286.71) (155.68) (155.50) N.A. N.A. N.A. N.A. N.A.

Consumer Segment EBITDA - % (23.91) (29.70) (28.68) (7.48) (6.85) N.A. N.A. N.A. N.A. N.A.

Consumer Segment Margin 184Aequs Limited Particulars Unit PTC Industries Limited As of and for As of and for As of and As of and for As of and for As of and As of and for As of and As of and for As of and for the six the six for the the Fiscal the Fiscal for the six the six for the the Fiscal the Fiscal months months Fiscal ended Ended Ended months months Fiscal ended Ended Ended period ended period ended March 31, March 31, March 31, period period ended March 31, March 31, March 31, September September 2025 2024 2023 ended September 2025 2024 2023 30, 2025 30, 2024 September 30, 2024 30, 2025 PAT margin % (3.16) (15.62) (11.07) (1.48) (13.48) 10.50 18.62 19.81 16.43 11.77 Cash Number of 232 293 253 203 157 N.A. N.A. N.A. N.A. N.A.

Conversion days Cycle Days Return on % 1.81 0.67 0.87 2.84 (3.72) N.A. N.A. N.A. N.A. N.A.

Capital Employed Return on % (2.07) (9.68) (14.30) (1.49) (40.68) N.A. N.A. N.A. N.A. 16.17 Equity Net Debt to Times 0.98 0.86 0.99 0.55 2.54 N.A. N.A. (0.09) 0.07 0.55 Equity Ratio Fixed Asset Times 0.75 0.82 1.84 1.65 1.36 N.A. N.A. N.A. N.A. N.A.

Turnover Consolidated Hours per 1,457,184.00 1,365,574.00 2,919,058.00 2,868,185.00 2,799,736.00 N.A. N.A. N.A. N.A. N.A.

Installed annum Capacity (in machining/ molding hours) Capacity % 43.63 44.47 41.77 44.40 39.19 N.A. N.A. N.A. N.A. N.A. utilization (per annum) N.A. – Comparative data is not available

Note:

1. For notes and definitions of KPIs related to our Company, please see “Definitions and Abbreviations - Key Performance and Financial Indicators (“KPIs”)” on page 16.

2. The revenue from operation, EBITDA, Profit/(loss) for the year, Cash Conversion cycle, ROCE, ROE, Net debt to equity ratio, Annual installed capacity (in machining hours), Capacity utilization (%), Total Assets and Fixed asset turnover ratio are traced from the annual reports or the investor presentation or publicly available documents on the company’s website or submitted to the stock exchanges for the respective fiscal year/period.

3. EBITDA Margin for listed peer is calculated as EBITDA as per the annual report or investor presentation or publicly available documents on the company’s website or submitted to the stock exchanges for the respective fiscal year/period.

4. PAT margin for the year margin is calculated as Profit/(loss) for the year/period as per the annual report or investor presentation or publicly available documents on the company’s website or submitted to the stock exchanges for the respective fiscal year/period as a percentage of revenue from operations of such listed peer company for the respective fiscal year/period.

5. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information -Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535.

185The KPIs set out above are not standardised terms and accordingly a direct comparison of such KPIs between companies may not be possible. Other companies may calculate such KPIs differently from us.

Comparison of KPIs based on additions or dispositions to our business Our Company has not made any additions or dispositions to its business during the six months period ended September 30, 2025 and September 30, 2024 and the Fiscals 2025, 2024 and 2023. For details, see “Our Business” and “History and Certain Corporate Matters- Details regarding material acquisitions or divestments of business/ undertakings, mergers, slump sales, amalgamations and revaluation of assets in the last 10 years” on pages 288 and 339, respectively.

8. Weighted average cost of acquisition, Floor Price and Cap Price

(i) Price per share of our Company (as adjusted for corporate actions, including split, bonus issuances) based on primary issuances of Equity Shares or convertible securities (excluding issuance of Equity Shares pursuant to a bonus issue) during the 18 months preceding the date of this Prospectus, where such issuance is equal to or more than 5% of the fully diluted paid-up share capital of our Company in a single transaction or multiple transactions combined together over a span of rolling 30 days (“Primary Issuances”) Nil

(ii) Price per share of the Company (as adjusted for corporate actions, including bonus issuances) based on secondary sale or acquisition of equity shares or convertible securities (excluding gifts) involving the Promoters, members of the Promoter Group and/or any Shareholders with rights to nominate directors during the 18 months preceding the date of filing of this Prospectus, where the acquisition or sale is equal to or more than 5% of the fully diluted paid-up share capital of our Company (calculated based on the pre-Offer capital before such transaction(s)), in a single transaction or multiple transactions combined together over a span of rolling 30 days (“Secondary Transactions”) Nil 186(iii) Since there are no such transactions under (a) and (b) above, the following are the details of the price per share of the Company basis the last five primary or secondary transactions (secondary transactions where the Promoters, members of the Promoter Group, Selling Shareholders or other Shareholder(s) having the right to nominate director(s) on the Board, are a party to the transaction), not older than three years prior to the date of this certificate irrespective of the size of transactions Date of allotment / Name of the allottee / Transferor Number of Face Price Nature of Nature of Total Cost transfer transferee Equity Shares value of per Consideration transaction (in ₹ million) Equity Equity share (₹) share (₹) Steadview capital Amicus Capital Partners November 13, 2025 12,100 10 123.97 Cash Transfer 1.50 Mauritius limited India Fund I Steadview capital Amicus Capital Partners November 13, 2025 60,048 10 123.97 Cash Transfer 7.44 Mauritius limited India Fund II Steadview capital Vasundhara Dempo November 13, 2025 197,874 10 123.97 Cash Transfer 24.53 Mauritius limited Family Private Trust* Steadview capital Girija Dempo Family November 13, 2025 197,874 10 123.97 Cash Transfer 24.53 Mauritius limited Private Trust* Steadview capital November 14, 2025 Ravindra K Mariwala 274,749 10 123.97 Cash Transfer 34.06 Mauritius limited Total Cost (₹) 92.06 Total Number of Equity Shares 742,645 Weighted Average Cost of Acquisition (₹) 123.97 * Acting through its trustees, Mr. Shrinivas Dempo and Mrs. Pallavi Dempo.

187(iv) Weighted average cost of acquisition, floor price and cap price The Floor Price is 0.95 times and the Cap Price is 1.00 times the weighted average cost of acquisition

based on Primary Issuances and Secondary Transactions as disclosed below:

Past transactions Weighted average Floor Price ₹ 118 Cap Price ₹ 124 cost of acquisition per Equity Share (₹)# Weighted average cost of acquisition of Nil NA NA Primary Issuances Weighted average cost of acquisition of Nil NA NA Secondary Transactions WACA basis the last five primary or 123.97 0.95 1.00 secondary transactions (secondary transactions where the Promoters, members of the Promoter Group, Selling Shareholders or other Shareholder(s) having the right to nominate director(s) on the Board, are a party to the transaction), not older than three years prior to the date of this certificate irrespective of the size of transactions # As certified by Manian & Rao, Chartered Accountants (FRN No. 001983S) by their certificate dated December 5, 2025.

(v) Detailed explanation for Cap Price being 1.00 times of weighted average cost of acquisition of primary issuances /secondary transactions of Equity Shares (as disclosed above) along with our Company’s KPIs and financial ratios for six months period ended September 30, 2025 and September 30, 2024 and for the Fiscal 2025, 2024 and 2023 • We are the only precision component manufacturer operating within a single special economic zone in India to offer fully vertically integrated manufacturing capabilities in the Aerospace Segment, which sets us apart from other contract manufacturers with selective manufacturing capabilities amongst our peers (Source: F&S Report) • We operate in three unique, engineering-led vertically integrated precision manufacturing ecosystems in India (Source: F&S Report). These manufacturing ecosystems comprise our Company, few of our suppliers and our Joint Ventures, which allow us to manufacture products in accordance with our clients’ specifications.

• Our manufacturing ecosystems enable large-scale, timely production of complex products, meeting global OEMs’ stringent requirements in both Aerospace Segment and Consumer Segment. • We had one of the largest portfolios of aerospace products in India, as of September 30, 2025 (Source: F&S Report) • Our advanced manufacturing capabilities also enable us to enter into new business segments by leveraging existing capabilities.

• We are one of the few manufacturers in India with niche metallurgy capabilities, specializing in precision machining of high-end alloys, including titanium alloys for our aerospace clients (Source:

F&S Report) • Further, we are the leading company within a single special economic zone in terms of end-to-end manufacturing capabilities (machining, forging, surface treatment and assembly) for the Aerospace Segment in India, based on the number of capabilities and approvals (Source: F&S Report).

(vi) The Offer Price is 12.4 times of the face value of the Equity Shares The Offer Price of ₹ 124 has been determined by our Company, in consultation with the BRLMs, on the basis of market demand from Bidders for Equity Shares, as determined through the Book Building Process, and is justified in view of the above qualitative and quantitative parameters.

Investors should read the above-mentioned information along with “Risk Factors”, “Our Business” and “Restated Consolidated Financial Information” on pages 37, 288 and 383, respectively, to have a more informed view. The trading price of the Equity Shares of our Company could decline due to the factors mentioned in “Risk Factors” on page 37 and you may lose all or part of your investments.

188STATEMENT OF POSSIBLE TAX BENEFITS REPORT ON STATEMENT OF POSSIBLE SPECIAL TAX BENEFITS The Board of Directors Aequs Limited (formerly known as Aequs Private Limited) Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru – 560 048, Karnataka, India

Date: November 14, 2025

Subject: Statement of possible special tax benefits (“the Statement”) available to Aequs Limited (formerly known as Aequs Private Limited) (“the Company”), its shareholders and its material subsidiaries in India audited by us, prepared in accordance with the requirement under Schedule VI – Part A - Clause (9) (L) of the Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended (“the ICDR Regulations”) This report is issued in accordance with the Engagement Letter dated 10 April 2025.

We hereby report that the enclosed Annexure II prepared by the Company, initialed by us for identification purpose, states the possible special tax benefits available to the Company, its shareholders and its material subsidiaries in India audited by us (“Material Subsidiaries”), which are defined in Annexure I (List of Material Subsidiaries Audited by us and considered as part of the Statement), under direct and indirect taxes (together the “Tax Laws”), presently in force in India as on the signing date, which are defined in Annexure III (List of Direct and Indirect Tax Laws (‘Tax Laws’)) prepared by the Company, initialed by us for identification purpose. These possible special tax benefits are dependent on the Company, its shareholders and its Material Subsidiaries fulfilling the conditions prescribed under the relevant provisions of the Tax Laws. Hence, the ability of the Company, its shareholders and its Material Subsidiaries to derive these possible special tax benefits is dependent upon their fulfilling such conditions, which is based on business imperatives the Company and its Material Subsidiaries may face in the future and accordingly, the Company, its shareholders and its Material Subsidiaries may or may not choose to fulfill.

The benefits discussed in the enclosed Annexure II cover the possible special tax benefits available to the Company, its shareholders and its Material Subsidiaries and do not cover any general tax benefits available to the Company, its shareholders and its Material Subsidiaries. Further, the preparation of the enclosed Annexure II and its contents is the responsibility of the management of the Company. We were informed that the Statement is only intended to provide general information to the investors and is neither designed nor intended to be a substitute for professional tax advice. In view of the individual nature of the tax consequences and the changing Tax Laws, each investor is advised to consult his or her own tax consultant with respect to the specific tax implications arising out of their participation in the proposed initial public offering of equity shares of the Company (the “Proposed Offer”) particularly in view of the fact that certain recently enacted legislation may not have a direct legal precedent or may have a different interpretation on the possible special tax benefits, which an investor can avail.

Neither we are suggesting nor advising the investors to invest money based on the Statement.

We conducted our examination in accordance with the Guidance Note on Reports or Certificates for Special Purposes (Revised 2016) (“Guidance Note”) issued by the Institute of Chartered Accountants of India. The Guidance Note requires that we comply with ethical requirements of the Code of Ethics issued by the Institute of Chartered Accountants of India. Our scope of work did not involve performance of any audit test in this context of our examination. Accordingly, we do not express an audit opinion.

We have complied with the relevant applicable requirements of the Standard on Quality Control (SQC) 1, Quality Control for Firms that Perform Audits and Reviews of Historical Financial information, and Other Assurance and Related Services Engagements.

We do not express any opinion or provide any assurance as to whether: i) the Company, its shareholders and its Material Subsidiaries will continue to obtain these possible special tax benefits in future; or 189ii) the conditions prescribed for availing the possible special tax benefits where applicable, have been/would be met with.

The contents of the enclosed Annexures are based on the information, explanation and representations obtained from the Company and its Material Subsidiaries, and on the basis of our understanding of the business activities and operations of the Company and its Material Subsidiaries.

Our views expressed herein are based on the facts and assumptions indicated to us. No assurance is given that the revenue authorities/ courts will concur with the views expressed herein. Our views are based on the existing provisions of the Tax Laws and its interpretation, which are subject to change from time to time. We do not assume responsibility to update the views consequent to such changes. We shall not be liable to the Company or Material Subsidiaries for any claims, liabilities or expenses relating to this assignment except to the extent of fees relating to this assignment, as finally judicially determined to have resulted primarily from bad faith or intentional misconduct. We will not be liable to the Company or Material Subsidiaries and any other person in respect of this report, except as per applicable law.

We hereby give consent to include this report in the Red Herring Prospectus and Prospectus and in any other material used in connection with the Proposed Offer, and it is not to be used, referred to or distributed for any other purpose without our prior written consent.

For B S R & Co. LLP Chartered Accountants Firm’s Registration No: 101248W/W-100022 Sampad Guha Thakurta Partner

Place: Chennai Membership No:060573

Date: 14 November 2025 UDIN: 25060573BMOKHN2561 190ANNEXURE I LIST OF MATERIAL SUBSIDIARIES AUDITED BY US AND CONSIDERED AS PART OF THE STATEMENT (Note 1)

1. AeroStructures Manufacturing India Private Limited

2. Aequs Engineered Plastics Private Limited Note 1: Material subsidiaries identified in accordance with the Securities and Exchange Board of India (Listing Obligations and Disclosure Requirements) Regulations, 2015, includes a subsidiary whose turnover or net worth in the immediately preceding year (i.e. 31 March 2025) exceeds 10% of the consolidated turnover or consolidated net worth respectively, of the Company, Aequs Stock Option Plan Trust, its subsidiaries, its associate and its joint ventures in the immediate preceding year.

191ANNEXURE II STATEMENT OF POSSIBLE SPECIAL TAX BENEFITS AVAILABLE TO AEQUS LIMITED (FORMERLY KNOWN AS AEQUS PRIVATE LIMITED) (“THE COMPANY”), ITS SHAREHOLDERS AND ITS MATERIAL SUBSIDIARIES UNDER THE APPLICABLE DIRECT AND INDIRECT TAXES (“TAX LAWS”) Outlined below are the Possible Special Tax Benefits available to the Company, its shareholders and its Material Subsidiaries under the Tax Laws. These Possible Special Tax Benefits are dependent on the Company, its shareholders and its Material Subsidiaries fulfilling the conditions prescribed under the Tax Laws. Hence, the ability of the Company, its shareholders and its Material Subsidiaries to derive the Possible Special Tax Benefits is dependent upon fulfilling such conditions, which are based on business imperatives it faces in the future, it may or may not choose to fulfill.

UNDER THE TAX LAWS A. Possible Special tax benefits available to the Company

Direct Taxes: a. Section 115JB- Special provision for payment of tax by certain companies:

Notwithstanding anything contained in any other provision of The Income Tax Act, 1961 (“the Act”), where in the case of an assessee, being a company, the income-tax, payable on the total income as computed under the Act in respect of any previous year relevant to the assessment year commencing on or after the 1st day of April, 2012, is less than 15% of its book profit, such book profit shall be deemed to be the total income of the assessee and the tax payable by the assessee on such total income shall be the amount of income-tax at the rate of 15%. The tax payable under Minimum Alternate Tax (MAT) shall be increased by applicable surcharge and education cess.

Book profit means the net profit as shown in the profit & loss account for the year as increased and decreased by some items as prescribed under the Act. When any amount of tax is paid as MAT by the Company, then it can claim the credit of such tax paid in accordance with the provision of Section 115JAA (‘MAT Credit’) MAT Credit will be difference of Tax paid as per MAT calculation and Income tax payable under normal provision of the Act. Such MAT Credit shall be eligible to be carried forward and set off for 15 Assessment Years immediately succeeding the Assessment Year (AY) in which such credit has become allowable. Set-off of MAT Credit shall be allowed for any AY to the extent of the difference between tax payable as per the normal provisions of the Act and MAT calculated as per Section 115JB of the Act.

We understand that the Company has opted for the normal provision of tax @25% for Financial Year

(FY) 2024-25, subject to provisions of Section 115JB of the Act. b. Section 32 (1)(iia) (Additional Depreciation) of the Act :

As per Section 32(1)(iia) of the Act, in the case of any new machinery or plant (other than ships and aircraft), which has been acquired and installed after the 31st day of March, 2005, by an assessee engaged in the business of manufacture or production of any article or thing or in the business of generation, transmission or distribution of power, a further sum equal to twenty per cent of the actual cost of such machinery or plant shall be allowed as deduction under clause (ii) : the Company being Manufacturing company is eligible to claim deduction under the aforesaid section.

The Company is claiming additional depreciation on new plant or machinery acquired and installed during FY 2024-25 (AY 2025-26). c. Deductions in respect of eligible employment cost of new employees under Section 80JJAA of the

Act:

Section 80JJAA of the Act provides tax incentives for employment generation and provides for deduction from income from business of an assessee for the employment of new employees by the assessee. The

employment cost eligible for these deductions should meet the following conditions:

192a) The gross total income of an assessee includes profits and gains derived from business to which

section 44AB applies. b) The business is not formed by splitting up / reconstruction of an existing business or acquired by transfer from any other person or as a result of any business reorganization.

c) In the case of an existing business, there must be an increase in the number of employees from the total number of the employees employed as on the last day of the preceding year d) Deduction under the aforementioned section shall be available in respect of total emoluments paid/payable to all additional employees in the aggregate provided that each additional employee – • is in receipt of total emoluments not more than INR 25,000 per month;

• has been in the employment for a period not less than 240 days during the previous year (subject to the condition that where an employee is in the employment for less than 240 days but is employed for the period of 240 days of more in the immediately succeeding year, he shall be deemed to be employed in the succeeding year and the provisions of Section 80JJAA shall apply accordingly.

• Participates in the recognised provident fund and the entire contribution is not paid by the Government under EPF scheme • Emoluments are not paid to the additional employees otherwise than by an account- payee cheque or account payee bank or by use of electronic clearing system through bank account.

This deduction is provided in order to promote employment generation in the country. This deduction, if claimed, can provide a deduction of 90% of the expenses incurred towards emoluments paid to the additional employees (such deduction of 90% is in addition to deductions of business expenses). Such deduction is available for three consecutive assessment years including the assessment year relevant to the previous year in which such additional employment was provided.

The Company has not availed the benefit of Section 80JJAA for the FY 2024-25 (AY 2025-26). d. Deduction in respect of inter-corporate dividends – Section 80M of the Act :

Up to 31st March 2020, any dividend paid to a shareholder by a company was liable to Dividend Distribution Tax (“DDT”), and the recipient shareholder was exempt from tax. Pursuant to the amendment made by the Finance Act, 2020, DDT stands abolished, and dividend received by a shareholder on or after 1st April, 2020 is liable to tax in the hands of the shareholder. The Company is required to deduct Tax Deducted at Source (“TDS”) at applicable rate specified under the Act read with applicable Double Taxation Avoidance Agreement (if any).

With respect to a resident corporate shareholder, a new Section 80M has been inserted in the Act to remove the cascading effect of taxes on inter-corporate dividends during FY 2020-21 and thereafter. The

section provides that where the gross total income of a domestic company in any previous year includes any income by way of dividends from any other domestic company or a foreign company or a business trust, there shall, in accordance with and subject to the provisions of this section, be allowed in computing the total income of such domestic company, a deduction of an amount equal to so much of the amount of income by way of dividends received from such other domestic company or foreign company or business trust as does not exceed the amount of dividend distributed by it on or before the due date. The “due date” means the date one month prior to the date for furnishing the return of income under sub-

section (1) of Section 139 of the Act.

The Company has not availed the benefit of Section 80M for the FY 2024-25 (AY 2025-26).

193Indirect Taxes:

1. The Special Economic Zone (“SEZ”) Unit of the Company is entitled to the following indirect tax benefits under the Special Economic Zones Act, 2005 (“the SEZ Act”) for authorized operations

subject to fulfilment of prescribed conditions and procedures: a) Exemption from payment of Customs duty on import of goods under the Customs Act, 1962. b) Exemption from payment of Integrated Goods and Service Tax (“IGST”) on services imported by a unit in the SEZ for authorized operations.

c) Procurement of goods/services by SEZ Unit for authorized operations from Domestic Tariff Area is treated as zero rated supplies under IGST Act, 2017.

2. Foreign Trade Policy 2023: Remission of Duties and Taxes on Export Products Scheme (RoDTEP): a) The Company is entitled for rebate of taxes / duties borne on exported products including goods and services used in the production of such exported products under the ‘Remission of Duties and Taxes on Exported Products’ scheme as notified by Notification no. 70/2023 dated 8th March 2024 further amended by Notification No. 32/2024-25, dated 30th September 2024 from the date of IT integration of SEZs with Customs Automated System (ICEGATE), i.e., 1st July 2024 till 31st December 2024. The said benefit has been extended to SEZ units for the period upto 5 February 2025 vide Notification No. 64/2024-25 dated 20 March 2025. After these periodic extensions, vide Notification No. 11/2025-26 dated 26 May 2025, Government of India has restored the benefit of RoDTEP with effect from 1 June 2025 with no end date.

b) The rebate is granted in the form of a transferable duty credit/ electronic scrip at a notified rate which is a percentage of Free on Board (FOB) value, subject to realization of sale proceeds within the period prescribed by Reserve Bank of India.

B. Possible Special tax benefits available to Shareholders

Direct Taxes: a) Dividend income earned by the shareholders would be taxable in their hands at the applicable rates.

However, in case of domestic corporate shareholders, deduction under Section 80M of the Act would be available on fulfilling the conditions (as discussed above in case of Holding company’s paragraph d).

Further, in case of shareholders who are individuals, Hindu Undivided Family, Association of Persons, Body of Individuals, whether incorporated or not and every artificial juridical person, surcharge would be restricted to 15%, irrespective of the amount of dividend.

b) As per Section 112A of the Act, long-term capital gains arising from transfer of an equity share, or a unit of an equity-oriented fund or a unit of a business trust shall be taxed at 10% (without indexation) of such capital gains subject to fulfilment of prescribed conditions under the Act as well as per Notification No.

60/2018/F. No.370142/9/2017-TPL dated 01 October 2018. It is relevant to note that tax shall be levied only where such capital gains exceed INR 1,25,000 (AY 2025-26 onward). With effective from 23 July 2024, long-term capital gains arising from transfer of an equity share, or a unit of an equity-oriented fund or a unit of a business trust shall be taxed at 12.5% (without indexation).

c) As per Section 111A of the Act, short-term capital gains arising from transfer of an equity share, or a unit of an equity-oriented fund or a unit of a business trust shall be taxed at 15% subject to fulfilment of prescribed conditions under the IT Act. With effective from 23rd July 2024, the taxation of Short-Term Capital Gain for listed equity shares, a unit of an equity-oriented fund, and a unit of a business trust has been increased to 20% from 15%.

d) In respect of non-resident shareholders, the tax rates and the consequent taxation shall be further subject to any benefits available under the applicable Double Taxation Avoidance Agreement, if any, between India and the country in which the non-resident has fiscal domicile.

e) Where the gains arising on transfer of shares of the Company are included in the business income of a shareholder and assessable under the head “Profits and Gains from Business or Profession “and such 194transfer is subjected to Security Transaction Tax (“STT”), then such STT shall be a deductible expense from the business income as per the provisions of Section 36(1)(xv) of the Act.

f) As regards the shareholders that are Mutual Funds, under Section 10(23D) of the Act, any income earned by a Mutual Fund registered under the Securities and Exchange Board of India Act, 1992, or a Mutual Fund set up by a public sector bank or a public financial institution, or a Mutual Fund authorized by the Reserve Bank of India would be exempt from income-tax, subject to such conditions as the Central Government may by notification in the Official Gazette specify in this behalf.

g) Resident as well as non-resident buyers should independently evaluate their obligations to withhold tax on transaction involving sale of shares by the shareholders of the Company in light of the provisions of

Section 195 and other provisions of the Act.

Except for the above, the Shareholders of the Company are not entitled to any other special tax benefits under the Act.

Indirect Taxes:

There are no special tax benefits available to the Shareholders under the Indirect Tax Laws.

C. Possible Special tax benefits available to Material Subsidiaries I. Special tax benefits available to AeroStructures Manufacturing India Private Limited (ASMIPL)

Direct Taxes: a) Section 115JB- Special provision for payment of tax by certain companies:

Notwithstanding anything contained in any other provision of The Income Tax Act, 1961 (“the Act”), where in the case of an assessee, being a company, the income-tax, payable on the total income as computed under the Act in respect of any previous year relevant to the assessment year commencing on or after the 1st day of April, 2012, is less than 15% of its book profit, such book profit shall be deemed to be the total income of the assessee and the tax payable by the assessee on such total income shall be the amount of income-tax at the rate of 15%. The tax payable under Minimum Alternate Tax (MAT) shall be increased by applicable surcharge and education cess.

Book profit means the net profit as shown in the profit & loss account for the year as increased and decreased by some items as prescribed under the Act. When any amount of tax is paid as MAT by the Company, then it can claim the credit of such tax paid in accordance with the provision of Section 115JAA (‘MAT Credit’) MAT Credit will be difference of Tax paid as per MAT calculation and Income tax payable under normal provision of the Act. Such MAT Credit shall be eligible to be carried forward and set off for 15 Assessment Years immediately succeeding the Assessment Year (AY) in which such credit has become allowable. Set-off of MAT Credit shall be allowed for any AY to the extent of the difference between tax payable as per the normal provisions of the Act and MAT calculated as per Section 115JB of the Act.

We understand that ASMIPL has opted for the normal provision of tax @25% for Financial Year (FY) 2024-25, subject to provisions of Section 115JB of the Act. b) Section 10AA of the Act :

As per Section 10AA of the Act, a unit set up in a Special Economic Zone (SEZ), which begins to manufacture or produce articles or things or provide any services during the previous year relevant to any assessment year commencing on or after the 1st day of April 2006, will be entitled to deduction as

follows: • 100 per cent of the profits and gains derived from export of articles or things manufactured or produced or any services provided from its unit set up in a SEZ for a period of 5 consecutive assessment years beginning with the assessment year relevant to the previous year in which such unit begins to manufacture or produce such articles or things or provide services, as the case may be;

195• 50 per cent of such profits and gains for further 5 assessment years; and • thereafter for another 5 consecutive assessment years, the deduction of such amount not exceeding 50% of the profit as is debited to Profit & Loss Account of the previous year in respect of which the deduction is to be allowed and credited to a special reserve viz. “Special Economic Zone Reinvestment Reserve Account” to be created and utilized for the purpose of the business in the manner laid down in Section 10AA (2) of the Act.

• The benefit for all 15 years will be available subject to fulfilment of conditions prescribed by the section. Further, the tax holiday u/s 10AA of the Act has already been discontinued for new SEZ units who start commercial production from 1st April 2021.

Note: However, the aforesaid deduction is not available while computing tax liability of the Company under Section 115JB of the Act i.e. Minimum Alternative Tax (‘MAT’) provisions.

Nonetheless, such MAT paid/ payable on the book profits computed in terms of the provisions of the Act would be eligible for credit against tax liability arising under normal provisions of the Act Further, such credit would not be allowed to be carried forward and set off beyond 15th A.Y.

immediately succeeding the assessment year in which such credit becomes allowable. • Unit 2 and Unit 3 of ASMIPL (being SEZ unit) is eligible to claim deduction u/s 10AA on 50% of the profits earned from business of manufacture and export up to FY 2024-25(10th A.Y.) and FY 2027-28 (10th A.Y.) respectively.

c) Deductions in respect of eligible employment cost of new employees under Section 80JJAA of the

Act:

Section 80JJAA of the Act provides tax incentives for employment generation and provides for deduction from income from business of an assessee for the employment of new employees by the assessee. The

employment cost eligible for these deductions should meet the following conditions: a) The gross total income of an assessee includes profits and gains derived from business to which

section 44AB applies. b) The business is not formed by splitting up / reconstruction of an existing business or acquired by transfer from any other person or as a result of any business reorganization.

c) In the case of an existing business, there must be an increase in the number of employees from the total number of the employees employed as on the last day of the preceding year d) Deduction under the aforementioned section shall be available in respect of total emoluments paid/payable to all additional employees in the aggregate provided that each additional employee – • is in receipt of total emoluments not more than INR 25,000 per month;

• has been in the employment for a period not less than 240 days during the previous year (subject to the condition that where an employee is in the employment for less than 240 days but is employed for the period of 240 days of more in the immediately succeeding year, he shall be deemed to be employed in the succeeding year and the provisions of Section 80JJAA shall apply accordingly.

• Participates in the recognised provident fund and the entire contribution is not paid by the Government under EPF scheme • Emoluments are not paid to the additional employees otherwise than by an account- payee cheque or account payee bank or by use of electronic clearing system through bank account.

This deduction is provided in order to promote employment generation in the country. This deduction, if claimed, can provide a deduction of 90% of the expenses incurred towards emoluments paid to the 196additional employees (such deduction of 90% is in addition to deductions of business expenses). Such deduction is available for three consecutive assessment years including the assessment year relevant to the previous year in which such additional employment was provided.

ASMIPL has not availed the benefit of Section 80JJAA for the FY 2024-25 (AY 2025-26). d) Deduction in respect of inter-corporate dividends – Section 80M of the Act :

Up to 31st March 2020, any dividend paid to a shareholder by a company was liable to Dividend Distribution Tax (“DDT”), and the recipient shareholder was exempt from tax. Pursuant to the amendment made by the Finance Act, 2020, DDT stands abolished, and dividend received by a shareholder on or after 1st April, 2020 is liable to tax in the hands of the shareholder. The Company is required to deduct Tax Deducted at Source (“TDS”) at applicable rate specified under the Act read with applicable Double Taxation Avoidance Agreement (if any).

With respect to a resident corporate shareholder, a new Section 80M has been inserted in the Act to remove the cascading effect of taxes on inter-corporate dividends during FY 2020-21 and thereafter. The

section provides that where the gross total income of a domestic company in any previous year includes any income by way of dividends from any other domestic company or a foreign company or a business trust, there shall, in accordance with and subject to the provisions of this section, be allowed in computing the total income of such domestic company, a deduction of an amount equal to so much of the amount of income by way of dividends received from such other domestic company or foreign company or business trust as does not exceed the amount of dividend distributed by it on or before the due date. The “due date” means the date one month prior to the date for furnishing the return of income under sub-

section (1) of Section 139 of the Act.

ASMIPL has not availed the benefit of Section 80M for the FY 2024-25 (AY 2025-26). e) Section 32 (1)(iia) of the Act :

As per Section 32(1)(iia) of the Act, in the case of any new machinery or plant (other than ships and aircraft), which has been acquired and installed after the 31st day of March, 2005, by an assessee engaged in the business of manufacture or production of any article or thing or in the business of generation, transmission or distribution of power, a further sum equal to twenty per cent of the actual cost of such machinery or plant shall be allowed as deduction under clause (ii) : the Company being Manufacturing company is eligible to claim deduction under the aforesaid section.

ASMIPL is claiming additional depreciation on new plant or machinery acquired and installed during FY 2024-25 (AY 2025-26).

Indirect Taxes:

1. The Special Economic Zone (“SEZ”) Unit of the Company is entitled to the following indirect tax benefits under the Special Economic Zones Act, 2005 (“the SEZ Act”) for authorized operations

subject to fulfilment of prescribed conditions and procedures: a) Exemption from payment of Customs duty on import of goods under the Customs Act, 1962. b) Exemption from payment of Integrated Goods and Service Tax (“IGST”) on services imported by a unit in the SEZ for authorized operations.

c) Procurement of goods/services by SEZ Unit for authorized operations from Domestic Tariff Area is treated as zero rated supplies under IGST Act 2017.

2. Foreign Trade Policy 2023: Remission of Duties and Taxes on Export Products Scheme (RoDTEP): a) The Company is entitled for rebate of taxes / duties borne on exported products including goods and services used in the production of such exported products under the ‘Remission of Duties and Taxes on Exported Products’ scheme as notified by Notification no. 70/2023 dated 8th March 2024 further amended by Notification No. 32/2024-25, dated 30th September 2024 from the date of IT integration of SEZs with Customs Automated System (ICEGATE), i.e., 1st July 2024 till 31st December 2024. The said benefit has been extended to SEZ units for the period 197upto 5 February 2025 vide Notification No. 64/2024-25 dated 20 March 2025. After these periodic extensions, vide Notification No. 11/2025-26 dated 26 May 2025, Government of India has restored the benefit of RoDTEP with effect from 1 June 2025 with no end date.

b) The rebate is granted in the form of a transferable duty credit/ electronic scrip at a notified rate which is a percentage of Free on Board (FOB) value, subject to realization of sale proceeds within the period prescribed by Reserve Bank of India.

II. Special Tax Benefits available to Aequs Engineered Plastics Private Limited (AEPPL)

Direct Taxes: a) Section 115JB- Special provision for payment of tax by certain companies:

Notwithstanding anything contained in any other provision of The Income Tax Act, 1961 (“the Act”), where in the case of an assessee, being a company, the income-tax, payable on the total income as computed under the Act in respect of any previous year relevant to the assessment year commencing on or after the 1st day of April, 2012, is less than 15% of its book profit, such book profit shall be deemed to be the total income of the assessee and the tax payable by the assessee on such total income shall be the amount of income-tax at the rate of 15%. The tax payable under Minimum Alternate Tax (MAT) shall be increased by applicable surcharge and education cess.

Book profit means the net profit as shown in the profit & loss account for the year as increased and decreased by some items as prescribed under the Act. When any amount of tax is paid as MAT by the Company, then it can claim the credit of such tax paid in accordance with the provision of Section 115JAA (‘MAT Credit’) MAT Credit will be difference of Tax paid as per MAT calculation and Income tax payable under normal provision of the Act. Such MAT Credit shall be eligible to be carried forward and set off for 15 Assessment Years immediately succeeding the Assessment Year (AY) in which such credit has become allowable. Set-off of MAT Credit shall be allowed for any AY to the extent of the difference between tax payable as per the normal provisions of the Act and MAT calculated as per Section 115JB of the Act.

We understand that AEPPL has opted for the normal provision of tax @25% for Financial Year (FY) 2024-25, subject to provisions of Section 115JB of the Act. b) Section 32 (1)(iia) (Additional Depreciation) of the Act :

As per Section 32(1)(iia) of the Act, in the case of any new machinery or plant (other than ships and aircraft), which has been acquired and installed after the 31st day of March, 2005, by an assessee engaged in the business of manufacture or production of any article or thing or in the business of generation, transmission or distribution of power, a further sum equal to twenty per cent of the actual cost of such machinery or plant shall be allowed as deduction under clause (ii) : the Company being Manufacturing company is eligible to claim deduction under the aforesaid section.

AEPPL is claiming additional depreciation on new plant or machinery acquired and installed during FY 2024-25 (AY 2025-26). c) Deductions in respect of eligible employment cost of new employees under Section 80JJAA of the

Act:

Section 80JJAA of the Act provides tax incentives for employment generation and provides for deduction from income from business of an assessee for the employment of new employees by the assessee. The

employment cost eligible for these deductions should meet the following conditions: a) The gross total income of an assessee includes profits and gains derived from business to which

section 44AB applies. b) The business is not formed by splitting up / reconstruction of an existing business or acquired by transfer from any other person or as a result of any business reorganization.

c) In the case of an existing business, there must be an increase in the number of employees from 198the total number of the employees employed as on the last day of the preceding year d) Deduction under the aforementioned section shall be available in respect of total emoluments paid/payable to all additional employees in the aggregate provided that each additional employee – • is in receipt of total emoluments not more than INR 25,000 per month;

• has been in the employment for a period not less than 240 days during the previous year (subject to the condition that where an employee is in the employment for less than 240 days but is employed for the period of 240 days of more in the immediately succeeding year, he shall be deemed to be employed in the succeeding year and the provisions of Section 80JJAA shall apply accordingly.

• Participates in the recognised provident fund and the entire contribution is not paid by the Government under EPF scheme • Emoluments are not paid to the additional employees otherwise than by an account- payee cheque or account payee bank or by use of electronic clearing system through bank account.

This deduction is provided in order to promote employment generation in the country. This deduction, if claimed, can provide a deduction of 90% of the expenses incurred towards emoluments paid to the additional employees (such deduction of 90% is in addition to deductions of business expenses). Such deduction is available for three consecutive assessment years including the assessment year relevant to the previous year in which such additional employment was provided.

AEPPL has not availed the benefit of Section 80JJAA for the FY 2024-25 (AY 2025-26). d) Deduction in respect of inter-corporate dividends – Section 80M of the Act :

Up to 31st March 2020, any dividend paid to a shareholder by a company was liable to Dividend Distribution Tax (“DDT”), and the recipient shareholder was exempt from tax. Pursuant to the amendment made by the Finance Act, 2020, DDT stands abolished, and dividend received by a shareholder on or after 1st April, 2020 is liable to tax in the hands of the shareholder. The Company is required to deduct Tax Deducted at Source (“TDS”) at applicable rate specified under the Act read with applicable Double Taxation Avoidance Agreement (if any).

With respect to a resident corporate shareholder, a new Section 80M has been inserted in the Act to remove the cascading effect of taxes on inter-corporate dividends during FY 2020-21 and thereafter. The

section provides that where the gross total income of a domestic company in any previous year includes any income by way of dividends from any other domestic company or a foreign company or a business trust, there shall, in accordance with and subject to the provisions of this section, be allowed in computing the total income of such domestic company, a deduction of an amount equal to so much of the amount of income by way of dividends received from such other domestic company or foreign company or business trust as does not exceed the amount of dividend distributed by it on or before the due date. The “due date” means the date one month prior to the date for furnishing the return of income under sub-

section (1) of Section 139 of the Act.

AEPPL has not availed the benefit of Section 80M for the FY 2024-25 (AY 2025-26). e) Section 10AA of the Act :

As per Section 10AA of the Act, a unit set up in a Special Economic Zone (SEZ), which begins to manufacture or produce articles or things or provide any services during the previous year relevant to any assessment year commencing on or after the 1st day of April 2006, will be entitled to deduction as

follows: • 100 per cent of the profits and gains derived from export of articles or things manufactured or produced or any services provided from its unit set up in a SEZ for a period of 5 consecutive assessment years beginning with the assessment year relevant to the previous year in which such 199unit begins to manufacture or produce such articles or things or provide services, as the case may be;

• 50 per cent of such profits and gains for further 5 assessment years; and • thereafter for another 5 consecutive assessment years, the deduction of such amount not exceeding 50% of the profit as is debited to Profit & Loss Account of the previous year in respect of which the deduction is to be allowed and credited to a special reserve viz. “Special Economic Zone Reinvestment Reserve Account” to be created and utilized for the purpose of the business in the manner laid down in Section 10AA (2) of the Act.

• The benefit for all 15 years will be available subject to fulfilment of conditions prescribed by the section. Further, the tax holiday u/s 10AA of the Act has already been discontinued for new SEZ units who start commercial production from 1st April 2021.

Note: However, the aforesaid deduction is not available while computing tax liability of the Company under Section 115JB of the Act i.e. Minimum Alternative Tax (‘MAT’) provisions. Nonetheless, such MAT paid/ payable on the book profits computed in terms of the provisions of the Act would be eligible for credit against tax liability arising under normal provisions of the Act Further, such credit would not be allowed to be carried forward and set off beyond 15th A.Y. immediately succeeding the assessment year in which such credit becomes allowable AEPPL being a SEZ unit is eligible to claim deduction u/s 10AA on 50% of the profits earned from business of manufacture and export up to FY 2025-26(10th A.Y.). However, the Company has substantial amount of accumulated tax losses. It may also be noted that, deduction u/s 10AA can be claimed only after utilisation of brought forward tax losses. Accordingly, no such benefit is availed by the Company.

Indirect Taxes:

1. The Special Economic Zone (“SEZ”) Unit of the Company is entitled to the following indirect tax benefits under the Special Economic Zones Act, 2005 (“the SEZ Act”) for authorized operations

subject to fulfilment of prescribed conditions and procedures: a) Exemption from payment of Customs duty on import of goods under the Customs Act, 1962. b) Exemption from payment of Integrated Goods and Service Tax (“IGST”) on services imported by a unit in the SEZ for authorized operations.

c) Procurement of goods/services by SEZ Unit for authorized operations from Domestic Tariff Area is treated as zero rated supplies under IGST Act 2017.

2. Foreign Trade Policy 2023: Remission of Duties and Taxes on Export Products Scheme (RoDTEP): a) The Company is entitled for rebate of taxes / duties borne on exported products including goods and services used in the production of such exported products under the ‘Remission of Duties and Taxes on Exported Products’ scheme as notified by Notification no. 70/2023 dated 8th March 2024 further amended by Notification No. 32/2024-25, dated 30th September 2024 from the date of IT integration of SEZs with Customs Automated System (ICEGATE), i.e., 1st July 2024 till 31st December 2024. The said benefit has been extended to SEZ units for the period upto 5 February 2025 vide Notification No. 64/2024-25 dated 20 March 2025. After these periodic extensions, vide Notification No. 11/2025-26 dated 26 May 2025, Government of India has restored the benefit of RoDTEP with effect from 1 June 2025 with no end date.

b) The rebate is granted in the form of a transferable duty credit/ electronic scrip at a notified rate which is a percentage of Free on Board (FOB) value, subject to realization of sale proceeds within the period prescribed by Reserve Bank of India.

NOTES:

1. The above is as per the current tax laws in force in India.

2002. The above Statement of possible special tax benefits sets out the provisions of tax laws in a summary manner only and is not a complete analysis or listing of all the existing and potential tax consequences of the purchase, ownership and disposal of equity shares of the Company.

3. This Statement does not discuss any tax consequences in any country outside India of an investment in the equity shares of the Company and Material Subsidiaries. The shareholders / investors in any country outside India are advised to consult their own professional advisors regarding possible income tax consequences that apply to them under the laws of such jurisdiction.

201ANNEXURE III LIST OF DIRECT AND INDIRECT TAX LAWS (‘TAX LAWS’) Sr. No: Details of Tax Laws Direct Tax

1. Income-tax Act, 1961 and Income-tax Rules, 1962 (‘IT Act’) Indirect Taxes

1. Central Goods and Services Tax Act, 2017, as amended read with Central Goods and Services Tax Rules, 2017, respective Circulars and Notifications made thereunder (‘CGST Act’)

2. Integrated Goods and Services Tax Act, 2017, as amended read with Integrated Goods and Services Tax Rules, 2017, respective Circulars and Notifications made thereunder (‘IGST Act')

3. Relevant State Goods and Services Tax Act, 2017, as amended read with State Goods and Services Tax Rules, 2017, respective Circulars and Notifications made thereunder (‘SGST Act’)

4. Goods and Services Tax (Compensation to States) Act, 2017

5. Foreign Trade Policy, 2023 read with Handbook of Procedures made thereunder (FTP)

6. Special Economic Zones Act, 2005 and Rules 2006 (‘SEZ Act’)

7. Customs Act, 1962 and Customs Tariff Act, 1975 read with respective Rules, Circulars and Notifications made thereunder (‘Customs Act’) For Aequs Limited (formerly known as Aequs Private Limited) _____________ Rajeev Kaul Managing Director

Place: Belagavi

Date: November 14, 2025 202STATEMENT OF SPECIAL TAX BENEFITS AVAILABLE TO AEQUS AERO MACHINE INC.

Date: November 13, 2025 To:

The Board of Directors Aequs Aero Machine, Inc 2220 Park St Paris, TX 75460 Aequs Limited Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru – 560 048, Karnataka, India

Subject: Statement of Special Tax Benefits (“the Statement”) available to Aequs Aero Machine Inc. (“AAM”) prepared in connection with the requirement under Schedule VI – Part A – Clause (9)(L) of Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended (the “SEBI ICDR Regulations”) We hereby report that the enclosed Annexure I and Annexure II (“Annexures”) describe the possible special tax benefits available to AAM and its shareholders under the tax laws of the United States of America, as stated in the enclosed Annexures • Certain of these benefits are dependent on AAM satisfying conditions prescribed under the relevant provisions of the U.S. Internal Revenue Code (“IRC”) and/or other applicable law, including state taxations laws applicable to AAM. Therefore, the ability of AAM to derive the possible special tax benefits may be dependent upon the satisfaction of such conditions which, based upon the various factors, AAM may or may not ultimately satisfy.

• The benefits discussed in the enclosed Annexures are neither exhaustive nor conclusive cover the possible special tax benefits and do not cover any general tax benefits available to AAM. • The contents of these Annexures are the responsibility of the management of AAM. We are informed that the Annexures are only intended to provide general information to the investor and are not designed nor intended to be a substitute for professional tax advice. In view of the individual nature of the tax consequence and the changing tax laws, each investor is advised to consult their own tax consultant with respect to the specific tax implications arising out of their participation in the proposed initial public offering of equity shares of Aequs Limited (“Offer”), particularly since certain recently enacted legislation may not have a direct legal precedent or may have a different interpretation of the possible special tax benefits, which an investor can avail. Neither are we suggesting, nor are we advising any investor to make any investment based on this statement of tax benefit. Reliance on this statement is on the express standing that we do not assume responsibility towards any investor and any third parties who may or may not invest in the Offer relying on this document.

• We don’t express any opinion or provide any type of assurance as to whether: o AAM or its shareholders will continue to obtain these benefits in the future; o The conditions prescribed for availing the benefits have been / will be satisfied; or o The revenue authorities / courts will concur with the views expressed therein.

• The contents of the enclosed Annexures are based on information, explanation, and representations obtained from AAM, which is responsible for the Annexures, and based on our understanding of AAM’s business activities and operations.

• We consent to our name being used as “Experts” as defined under the provisions of Section 2 (38) of the Companies Act 2013, to the extent applicable, and in our capacity as Certified Public Accountants in relation to this Statement, issued by us, included in the updated draft red herring prospectus – II, red herring prospectus, and prospectus of Aequs Limited.

203• We hereby give consent to include this Statement in the red herring prospectus, the prospectus, and in any other material used in connection with the Offer of Aequs Limited prepared under the Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended, to be submitted or filed by Aequs Limited with the Securities and Exchange Board of India (“SEBI”), BSE Limited (“BSE”) and National Stock Exchange of India Limited (“NSE”, together with BSE the “Stock Exchanges”) and the Registrar of Companies, Karnataka, situated at Bengaluru, as applicable in connection with the Offer, and it is not to be used, referred to or distributed for any other purpose without our prior written consent. We also authorize the merchant bankers to submit the letter to SEBI and include in the repository maintained by the Stock Exchanges pursuant to the SEBI circular bearing no.

SEBI/HO/CFD/CFD-TPD-1/P/CIR/2024/170 dated December 5, 2024. • Our views expressed herein are based on the facts and assumptions indicated to us. No assurance is given that the revenue authorities/ courts will concur with the views expressed herein. Our views are based on the existing provisions as defined in Annexure I and its interpretation in Annexure II, which are subject to change from time to time.

By Martin Bahl, CPA, Bahl & Co., P.C ______________________

Enclosed:

Annexure I Annexure II 204Annexure I LIST OF TAX LAWS Sr. No: Details of Tax laws

1. Internal Revenue Code of 1986 (IRC) - Title 26 of the United States Code (26 USC)

2. Treasury Regulations issued by the U.S. Department of the Treasury 205Annexure II Statement of Special Tax Benefit available to AAM under tax laws of the United States of America The following are the possible special direct tax benefits available to AAM IRC Section 168(k) - Accelerated Cost Recovery System (Bonus Depreciation) The Consolidated US Group may be allowed to take an additional first-year depreciation on the cost of qualifying property.

Under the current law, the bonus depreciation percentage will decrease by 20 percent each year for property placed in service after December 31, 2022, and before January 1, 2027. The bonus depreciation percentage allowance

schedule is as follows: 60% (2024), 40% (2025), 20% (2026) and no bonus depreciation allowed on the qualifying property placed in service during 2027.

IRC Section 179 - Election To Expense Certain Depreciable Business Assets The Consolidated US Group may be allowed to expense 100% of the cost of certain qualifying section 179 property subject to certain limitations.

For tax years beginning in 2024, the maximum section 179 expense deduction is $1,220,000. However, the deduction begins to phase out once the cost of section 179 property exceeds $3,050,000. Separate section 179 expense deduction limits may apply to automobiles.

The following are the possible special indirect tax benefits available to AAM

Manufacturing Sales Tax exemptions:

Given various conditions are met, the State of Texas provides sales tax exemptions to the taxpayers who manufacture, fabricate or process tangible personal property for sale i.e. manufacturing exemption.

206REPORT ON STATEMENT OF POSSIBLE SPECIAL TAX BENEFITS FOR AEQUS AEROSPACE FRANCE To the President AEQUS AEROSPACE FRANCE (“AAF SAS”) ZI de l’Appentière 49280 MAZIERES EN MAUGES

For informational purpose only:

Aequs Limited (formerly known as Aequs Private Limited) Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru – 560 048, Karnataka, India

Date: November 12, 2025

Subject: Statement of possible special tax benefits (“the Statement”) available to AEQUS AEROSPACE FRANCE (“AAF SAS”), audited by us, prepared in accordance with the requirement under Schedule VI – Part A - Clause (9) (L) of the Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended (“the ICDR Regulations”) We hereby report that the enclosed Annexure I prepared by AAF SAS, initialed by us for identification purpose, states the possible special tax benefits available to AAF SAS and its shareholders, under direct and indirect taxes (together the “Tax Laws”), presently in force in France as on the signing date, which are defined in Annexure II (List of Direct and Indirect Tax Laws (‘Tax Laws’)) prepared by AAF SAS, initialed by us for identification purpose. These possible special tax benefits are dependent on AAF SAS , and its shareholders fulfilling the conditions prescribed under the relevant provisions of the Tax Laws. Hence, the ability of AAF SAS , and its shareholders to derive these possible special tax benefits is dependent upon their fulfilling such conditions, which is based on business imperatives AAF SAS may face in the future and accordingly, AAF SAS, and its shareholders may or may not choose to fulfill.

The benefits discussed in the enclosed Annexure I cover the possible special tax benefits available to AAF SAS, and its shareholders and do not cover any general tax benefits available to AAF SAS, and its shareholders. Further, the preparation of the enclosed Annexure I and its contents is the responsibility of the management of AAF SAS.

We were informed that the Statement is only intended to provide general information to the investors and is neither designed nor intended to be a substitute for professional tax advice. In view of the individual nature of the tax consequences and the changing Tax Laws, each investor is advised to consult his or her own tax consultant with respect to the specific tax implications arising out of their participation in the proposed initial public offering of equity shares of face value of Rs. 10 each of Aequs Limited (the “Proposed Offer”).

We conducted our examination in accordance with the International Standards on Auditing and Other Assurance and Related Services Engagements, issued by the IAASB. We comply with ethical requirements of the Code of Ethics issued by IESBA (IFAC’s Code of Ethics for Professional Accountants) and local requirements (“Code de Déontologie”). Our scope of work did not involve performance of any audit test in this context of our examination.

Accordingly, we do not express an audit opinion We have complied with the relevant applicable requirements of the Standard on Quality Control (ISQM1) Quality Control for Firms that Perform Audits and Reviews of Historical Financial information, and Other Assurance and Related Services Engagements.

We do not express any opinion or provide any assurance as to whether: i) AAF SAS, and its shareholders will continue to obtain these possible special tax benefits in future; or ii) the conditions prescribed for availing the possible special tax benefits where applicable, have been/would be met with.

The contents of the enclosed Annexures are based on the information, explanation and representations obtained from AAF SAS, and on the basis of our understanding of the business activities and operations of AAF SAS.

207Our views expressed herein are based on the facts and assumptions indicated to us. No assurance is given that the revenue authorities/ courts will concur with the views expressed herein. Our views are based on the existing provisions of the Tax Laws and its interpretation, which are subject to change from time to time. We do not assume responsibility to update the views consequent to such changes. We shall not be liable to AAF SAS for any claims, liabilities or expenses relating to this assignment except to the extent of fees relating to this assignment, as finally judicially determined to have resulted primarily from bad faith or intentional misconduct. We will not be liable to AAF SAS or any other person in respect of this report, except as per applicable law.

We consent to our name being used as “Expert”, to the extent applicable, and in our capacity as statutory auditor (“commissaire aux comptes”) in relation to this Statement, issued by us, included in the Updated Draft Red Herring Prospectus – I, Updated Pre-filed Draft Red Herring Prospectus-II, Red Herring Prospectus and the Prospectus of Aequs Limited.

We hereby give consent to include this report in the Updated Draft Red Herring Prospectus-I, Updated Pre- filed Draft Red Herring Prospectus-II, Red Herring Prospectus and the Prospectus and in any other material used in connection with the Proposed Offer including the repositories of the stock exchanges pursuant to the SEBI circular bearing number SEBI/HO/CFD/CFD-TPD- 1/P/CIR/2024/170, and it is not to be used, referred to or distributed for any other purpose without our prior written consent.

Paris, November 12, 2025 PKF Arsilon Commissariat aux Comptes Jean-Laurent Bracieux 208ANNEXURE I STATEMENT OF POSSIBLE SPECIAL TAX BENEFITS AVAILABLE TO AEQUS AEROSPACE FRANCE (“AAF SAS”) AND ITS SHAREHOLDERS UNDER THE APPLICABLE DIRECT AND INDIRECT TAXES (“TAX LAWS”) Outlined below are the Possible Special Tax Benefits available to the Company, its shareholders and its Material Subsidiaries under the Tax Laws. These Possible Special Tax Benefits are dependent on the Company, its shareholders and its Material Subsidiaries fulfilling the conditions prescribed under the Tax Laws. Hence, the ability of the Company, its shareholders and its Material Subsidiaries to derive the Possible Special Tax Benefits is dependent upon fulfilling such conditions, which are based on business imperatives it faces in the future, it may or may not choose to fulfill.

UNDER THE TAX LAWS A. Possible Special tax benefits available to the Company N/A B. Possible Special tax benefits available to Shareholders N/A C. Possible Special tax benefits available to Material Subsidiaries N/A

NOTES:

1. The above is as per the current Tax Laws in force in France.

2. The above Statement of possible special tax benefits sets out the provisions of Tax Laws in a summary manner only and is not a complete analysis or listing of all the existing and potential tax consequences of the purchase, ownership and disposal of equity shares of the Company.

3. This Statement does not discuss any tax consequences in any country outside India of an investment in the equity shares of the Company and Material Subsidiaries. The shareholders / investors in any country outside India are advised to consult their own professional advisors regarding possible income tax consequences that apply to them under the laws of such jurisdiction.

209ANNEXURE II LIST OF DIRECT AND INDIRECT TAX LAWS (‘TAX LAWS’) Sr. No: Details of Tax Laws

1. Code Général des Impôts (France)

2. Code Général des Impôts – Annexe I

3. Code Général des Impôts – Annexe II

4. Code Général des Impôts – Annexe III

5. Code Général des Impôts – Annexe IV 210STATEMENT OF SPECIAL TAX BENEFITS AVAILABLE TO AEQUS OIL & GAS, LLC

Date: November 13, 2025 To:

The Board of Directors Aequs Oil & Gas, LLC 2220 W Park St Paris, TX 75460 Aequs Limited Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru – 560 048, Karnataka, India

Subject: Statement of Special Tax Benefits (“the Statement”) available to Aequs Oil & Gas, LLC prepared in connection with the requirement under Schedule VI – Part A - Clause (9) (L) of Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended (the “SEBI ICDR Regulations”) • We hereby report that the enclosed Annexure I and Annexure II (“Annexures”) describe the possible special tax benefits available to Aequs Oil & Gas, LLC (“The Partnership”) and its partners, under the tax laws of the United States of America, as stated in the enclosed Annexures.

• Certain of these benefits are dependent on the partnership satisfying conditions prescribed under the relevant provisions of the U.S. Internal Revenue Code (“IRC”) and/or other applicable law, including state taxations laws applicable to the partnership. Therefore, the ability of the partnership to derive the possible special tax benefits may be dependent upon the satisfaction of such conditions which, based upon the various factors, the partnership may or may not ultimately satisfy.

• The benefits discussed in the enclosed Annexures are neither exhaustive nor conclusive cover the possible special tax benefits and do not cover any general tax benefits available to the partnership. • The contents of these Annexures are the responsibility of the management of the partnership. We are informed that Annexures are only intended to provide general information to the investor and are not designed nor intended to be a substitute for professional tax advice. In view of the individual nature of the tax consequence and the changing tax laws, each investor is advised to consult their own tax consultant with respect to the specific tax implications arising out of their participation in the proposed initial public offering of equity shares of Aequs Limited (“Offer”), particularly since certain recently enacted legislation may not have a direct legal precedent or may have a different interpretation of the possible special tax benefits, which an investor can avail. Neither are we suggesting, nor are we advising any investor to make any investment based on this statement of tax benefit. Reliance on this statement is on the express standing that we do not assume responsibility towards any investor and any third parties who may or may not invest in the Offer relying on this document.

• We don’t express any opinion or provide any type of assurance as to whether: o The Partnership and its partners will continue to obtain these benefits in the future. o The conditions prescribed for availing of the special tax benefits have been / will be satisfied;

or o The revenue authorities / courts will concur with the views expressed therein. • The contents of the enclosed Annexures are based on information, explanation, and representations obtained from the partnership, which is responsible for the Annexures, and based on our understanding of the partnership’s business activities and operations.

• We consent to our name being used as “Experts” as defined under the provisions of Section 2 (38) of the 211Companies Act, 2013, to the extent applicable, and in our capacity as Certified Public Accountants in relation to this Statement, issued by us, included in the updated draft red herring prospectus II, red herring prospectus, and prospectus of Aequs Limited.

• We hereby give consent to include this Statement in this updated draft red herring prospectus-II, red herring prospectus, the prospectus and in any other material used in connection with the Offer of Aequs Limited prepared under the Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended, to be submitted or filed by Aequs Limited with the Securities and Exchange Board of India (“SEBI”), BSE Limited (“BSE”) and National Stock Exchange of India Limited (“NSE”, together with BSE the “Stock Exchanges”) and the Registrar of Companies, Karnataka, situated at Bengaluru, as applicable in connection with the Offer, and it is not to be used, referred to or distributed for any other purpose without our prior written consent. We also authorize the merchant bankers to submit the letter to SEBI and include in the repository maintained by the Stock Exchanges pursuant to the SEBI circular bearing no. SEBI/HO/CFD/CFD-TPD-1/P/CIR/2024/170 dated December 5, 2024.

• Our views expressed herein are based on the facts and assumptions indicated to us. No assurance is given that the revenue authorities/ courts will concur with the views expressed herein. Our views are based on the existing provisions as defined in Annexure I and its interpretation in Annexure II, which are subject to change from time to time.

By Martin Bahl, CPA, Bahl & Co., P.C ___________________________________

Enclosed:

Annexure I Annexure II 212Annexure I LIST OF TAX LAWS Sr. No: Details of Tax laws

1. Internal Revenue Code of 1986 (IRC) - Title 26 of the United States Code (26 USC)

2. Treasury Regulations issued by the U.S. Department of the Treasury 213Annexure II Statement of Special Tax Benefit available to Aequs Oil & Gas, LLC under tax laws of the United States of America There are no special tax benefits available to Aequs Oil & Gas, LLC under the tax laws of United States of America since it has closed its operations.

214STATEMENT OF SPECIAL TAX BENEFITS AVAILABLE TO AEQUS AEROSPACE B.V.

To:

The Board of Directors, Joop Geesinkweg 701, 1114 AB Amsterdam-Duivendrecht Aequs Limited, Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru – 560 048, Karnataka, India

Date: November 13 2025

Subject: Statement of Special Tax Benefits (“the Statement”) available to Aequs Aerospace B.V.

(AABV) prepared in connection with the requirement under Schedule VI – Part A – Clause (9)(L) of Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended (the “SEBI ICDR Regulations”) • We hereby confirm that the enclosed Annex I and Annex II (together the Annexes) describe the special tax benefits available to AABV under the tax laws of the Netherlands, as stated in the Annexes.

• Certain of these benefits are dependent on AABV satisfying conditions prescribed under the relevant provisions of the Dutch Corporation Tax Act (CITA), Dividend Withholding Tax Act (DWT), and Turnover Tax Act (TTA). Therefore, the ability of AABV to derive special tax benefits may be dependent upon the satisfaction of such conditions which, based upon the various factors, AABV may or may not ultimately satisfy.

• The benefits discussed in the Annexes are neither exhaustive nor conclusive. The benefits cover only the special tax benefits available to AABV and do not cover general tax benefits that are available to AABV.

• The contents of the Annexes are the responsibility of the management of AABV. We are informed that the Annexes are only intended to provide general information to the investors and are not designed, nor intended to be a substitute of the professional tax advice. In view of the individual nature of the tax consequences and the changing tax laws, each investor is advised to consult their own tax consultant with respect to the specific tax implications arising out of their participation in the proposed initial public offering of the equity shares of Aequs Limited (“Offer”). Reliance on this statement is on the express standing that we do not assume responsibility towards any investor and any third parties who may or may not invest in the Offer relying on this document.

• We do not express any opinion or provide or any type of assurance as to whether: o AABV or its shareholders will continue to obtain these benefits in the future. o The conditions prescribed for availing the special tax benefit have been / will be satisfied; or o The revenue authorities / courts will concur with the views expressed therein.

• The contents of the Annexes are based on information, explanation, and representations obtained from AABV, which is responsible for the Annexes, and based on our understanding of the business activities and operations of AABV.

• We hereby give consent to include this Report in the updated draft red herring prospectus-II, red herring prospectus and the prospectus and in any other material used in connection with the Offer, including the repositories of the stock exchanges pursuant to the SEBI circular bearing number SEBI/HO/CFD/CFD- TPD-1/P/CIR/2024/170.

• Our views expressed herein are based on the facts and assumptions indicated to us. No assurance is given that the revenue authorities/ courts will concur with the views expressed herein. Our views are based on the existing provisions of the Dutch Tax laws and its interpretation in, which are subject to change from time to time.

215For and on behalf of KC Legal, Onno Backx Tax Partner 216Annex I – List of laws Details of tax laws 1 Corporation Tax Act 1969 (Wet op de vennootschapsbelasting 1969) 2 Dividend Withholding Tax Act 1965 (Wet op de dividendbelasting 1965) 3 Turnover Tax Act 1968 (Wet op omzetbelasting 1968) 217Annex II – Statement of Special Tax Benefit available to AABV, under tax laws of the Netherlands There are no special tax benefits available to AABV under the Dutch CITA, DWT, and TTA.

218SECTION IV: ABOUT OUR COMPANY INDUSTRY OVERVIEW Unless otherwise specified, the information in this section is derived from the industry report titled “An Assessment of Aerospace and Consumer PEC Industry Report” dated November 14, 2025 (the “Industry Report”) which has been commissioned and paid for by our Company for an agreed fee and prepared only for the purposes of confirming our understanding of the industry exclusively in connection with the Offer. The Industry Report was available on the website of our Company from the date of filing of the Red Herring Prospectus until the Bid/ Offer Closing Date at www.aequs.com/investor/ and has also been included in “Material Contracts and Documents for Inspection – Material Documents” on page 682. We engaged Frost & Sullivan (India) Private Limited (“F&S”), in connection with the preparation of the Industry Report on December 10, 2024, as supplemented by a subsequent engagement letter dated September 8, 2025. F&S is an independent agency and not a related party of our Company, our Subsidiaries, Directors, Promoters, Key Managerial Personnel, Senior Management or the Book Running Lead Managers. The data included in this section includes excerpts from the Industry Report and may have been re-ordered by us for the purposes of presentation.

Unless otherwise indicated, all financial, operational, industry and other related information derived from the Industry Report and included herein, all references to a “year” in this Prospectus are to a calendar year. For further details and risks in relation to commissioned reports, see “Internal Risk Factors – This Prospectus contains information from third parties, including an industry report prepared by an independent third-party research agency, Frost & Sullivan (India) Private Limited, which we have commissioned and paid for purposes of confirming our understanding of the industry exclusively in connection with the Offer” on page 85.

Global Economic Section Global Macroeconomic Overview The global macroeconomic outlook for 2025 reflects a cautiously optimistic tone amid a complex backdrop of challenges and opportunities. Despite some headwinds, including trade uncertainties and geopolitical tensions, the world economy is demonstrating resilience, adaptability, and promising growth prospects across several regions.

Global GDP growth is projected to stabilize around 2.80% in 2025, just slightly below the 3.30% recorded in 2024, signalling a steady overall momentum. This performance reflects significant front-loading of economic activity ahead of tariff implementations, resulting in a more measured impact on trade as the year progresses.

Financial conditions are improving in major economies, supported by fiscal expansions in key jurisdictions, which are fostering investment and consumer spending confidence.

Regionally, the outlook is varied but bright. Emerging markets, led by India, are powering growth with forecasts above 6.20% in 2025, buoyed by strong domestic demand, robust labor markets, and technological advancements.

China’s economy continues to show resilience despite a modest slowdown, fuelled by policy support and expanding innovation sectors. The European Union is poised for a moderate rebound, with growth expected to accelerate from subdued levels as energy prices ease and investment initiatives take effect.

Trade policy uncertainty, though still a risk, is showing signs of easing as major economies engage in dialogue and negotiate tariff reductions. The EU-US trade agreement framework, a new political and economic arrangement announced in August 2025, establishes a 15% tariff on most EU exports to the US, with preferential zero-tariff access for a range of US agriculture, seafood, energy, and industrial goods. This renewed cooperation is helping to stabilize supply chains and reduce costs for businesses and consumers globally.

Geopolitical tensions, while persistent, have not significantly derailed investor confidence or financial markets, thanks to proactive policy measures and improved diplomatic engagement. This environment supports a constructive outlook for global commerce and innovation.

Global GDP Growth Global GDP growth between 2019 and 2024 demonstrated significant volatility, influenced by periods of robust expansion, economic deceleration, and the impact of unprecedented global events. The global GDP is expected to grow at 2.80% in 2025.

219Figure 1: Percentage Change in Global Real Annual GDP Growth Rate, 2019-2030F

6.60%

2.90% 3.60% 3.50% 3.30% 2.80% 3.00% 3.20% 3.20% 3.20% 3.10% tn e c r e P n I 2019 2020 2021 2022 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F -2.70%

Source: International Monetary Fund (IMF) | Note: The annual period for the above chart is Calendar Year (CY) The pandemic in 2020 led to an unprecedented global recession, with GDP contracting by 2.70% due to widespread lockdowns, disruptions in production, and a dramatic decline in international trade and travel. In 2021, the world economy rebounded strongly with a 6.60% growth, driven by vaccine rollouts, stimulus measures, and the release of pent-up consumer demand as economies reopened. Despite this recovery, global growth moderated again in 2022, settling at 3.60%, as inflationary pressures and geopolitical tensions, particularly Russia's invasion of Ukraine, dampened economic activity. In 2024, global growth further decelerated to 3.30%, reflecting tighter monetary policies, supply chain issues. and an uncertain global economic environment. The global economy is experiencing a new wave of tariffs and trade barriers, notably between major economies like the US, China, and the EU. The recent escalation of US tariffs (including on India and China) has had its impacts on production costs, disrupted supply chains, and dampened global trade growth, these are immediate short-term reactions. However, the long-term impacts are uncertain with countries engaged in continued diplomatic and dialogue. This trend reduces export opportunities and triggers business uncertainty, leading to postponed investments.

The International Monetary Fund (IMF) projects global GDP growth to remain relatively stable between 2026 and 2030, fluctuating narrowly around 3.00%-3.20% range.

The US GDP is expected to grow 1.80% in 2025, reflecting a moderate recovery amid easing inflation and supportive monetary policies, while ongoing trade tensions and tariff shocks could pose risks to growth.

The European economy is also expected to grow 1.20% in 2025. Growth is expected to remain stable at around

1.60% through 2027 and expected to reach 1.40% in 2030. This modest growth trajectory highlights ongoing challenges, including high public debt levels and geopolitical uncertainties affecting the region's economic stability.

Geopolitical risks, such as on-going conflicts and trade tariffs, contributed to price instability, particularly in energy and food markets. Central banks worldwide responded by tightening monetary policies, however the rates have now started to ease from their 2023–2025 highs.

Inflation in the USA is 3.00% in 2025, with estimates suggesting a decline to around 2.20% by year-end. The Federal Reserve announced 0.25% points interest rate cut on 17th September 2025 with federal fund rates to fall in a range between 4.00% and 4.25%.

The Inflation in Europe is expected to reach 3.70% in 2025, with estimates suggesting a return to the European Central Bank's (ECB) target of around 2.10%, with projections indicating a further decline to 1.70% in 2026, followed by a modest uptick to 1.90% in 2027.

In emerging economies, inflation poses additional risks which could lead to increased debt burdens and potential currency depreciation. Conversely, in more developed markets, inflationary pressures are leading to shifts in consumer behaviour, with people adjusting spending patterns and focusing on savings.

220GDP Comparison India VS Advanced Economies VS EM and developing economies Figure 1: Real GDP Annual Growth Trends in Key Economies (In Percent), 2019-2030F

15.00%

10.00% e g 5.00% a t n e c 0.00% r e P n -5.00% I -10.00% -15.00% 2025 2026 2027 2028 2029 2030 2019 2020 2021 2022 2023 2024 E F F F F F India 3.90% -5.80% 9.70% 7.60% 9.20% 6.50% 6.20% 6.30% 6.50% 6.50% 6.50% 6.50% USA 2.60% -2.20% 6.10% 2.50% 2.90% 2.80% 1.80% 1.70% 2.00% 2.10% 2.10% 2.10% UK 1.60% -10.30% 8.60% 4.80% 0.40% 1.10% 1.10% 1.40% 1.50% 1.50% 1.40% 1.40% China 6.10% 2.30% 8.60% 3.10% 5.40% 5.00% 4.00% 4.00% 4.20% 4.10% 3.70% 3.40% ASEAN 4.20% -4.40% 4.10% 5.50% 4.10% 4.60% 4.00% 3.90% 4.50% 4.30% 4.50% 4.50% Japan -0.40% -4.20% 2.70% 0.90% 1.50% 0.10% 0.60% 0.60% 0.60% 0.60% 0.50% 0.50% South America 0.00% -6.30% 7.50% 4.00% 1.70% 2.20% 2.50% 2.40% 2.50% 2.50% 2.50% 2.50% LATAM 0.20% -6.90% 7.40% 4.20% 2.40% 2.40% 2.00% 2.40% 2.70% 2.70% 2.70% 2.60%

Source: International Monetary Fund (IMF) | Note: The annual period for the above chart is Calendar Year (CY) India In 2019, the economy grew at 3.90%, reflecting a slowdown from previous years. The 2020 contraction -5.80% was caused by strict COVID-19 lockdowns. In 2025, a strong recovery is expected with 6.20% growth, driven by release of pent-up demand and government stimulus. India is expected to remain the world’s fastest-growing economy between 2026 and 2030 with growth of about 6.50%. The increase will be driven by infrastructure development, digitalization, and growth in manufacturing through programs like Make in India.

USA The economy is expected to grow 1.80% in 2025 and 1.70% in 2026, reflecting the characteristics of a mature economy with stable demand and well-developed markets. This period of consolidation allows the USA to strengthen its economic foundations and adapt to global shifts. By 2030, growth is expected to improve slightly to 2.10%, showcasing the country’s resilience, supported by its leadership in innovation, strong services sector, and technological advancements. The ongoing trade tensions and tariff shocks could pose risk to growth in the short term UK Modest growth of 1.60% was recorded in the UK in 2019, but a significant contraction of 10.30% in 2020 was experienced, ranking among the worst globally due to strict lockdown measures and uncertainty surrounding Brexit. A rebound of 8.60% in 2021 was observed as restrictions were lifted and businesses resumed operations.

In 2025 the economy is expected to grow by 1.10% and 1.40% by 2030, attributed to trade challenges related to Brexit, labour shortages, and inflationary pressures.

China Strong economic growth was maintained in China before the pandemic, with a recorded expansion of 6.10% in

2019. However, a sharp slowdown occurred in 2020, as growth declined to 2.30% due to lockdown measures and global trade disruptions. A significant rebound was observed in 2021, with growth reaching 8.60%, supported by exports, infrastructure investments, and government stimulus. Despite this recovery, the GDP is expected to grow by 4.00% in 2025 and a gradual slowdown, with estimates of 3.40% growth by 2030.

221ASEAN The ASEAN region experienced steady economic expansion, with 4.20% growth in 2019. However, a pandemic- induced recession led to a contraction of 4.40% in 2020. A moderate recovery followed in 2021, with growth reaching 4.10%, driven by improvements in trade, digital transformation, and foreign investments. The economic outlook remains strong, with growth of 4.00% in 2025, projected to reach 4.50% by 2030.

Japan A mild economic contraction was experienced by Japan in 2019, with GDP declining by 0.40% The downturn worsened in 2020, as a 4.20% decline was recorded due to the pandemic’s economic disruptions. A moderate recovery of 2.70% occurred in 2021, supported by government stimulus measures and rising exports. The economy is expected to grow by 0.60% in 2025 and further decline to 0.50% in 2030.

South America Economic stagnation was recorded in 2019, with no significant growth observed. A deep recession followed in 2020, as GDP declined by 6.30%, largely due to the severe impact of COVID-19 on tourism, commodities, and industrial production. A recovery of 7.50% was registered in 2021, driven by improving exports and government assistance. The economy is expected to grow by 2.50% in 2025 and sustain the same growth rate of 2.50% in

2030.

Latin America Economic growth in Latin America was limited in 2019, with only a 0.20 % increase recorded. A severe contraction followed in 2020, as GDP shrank by 6.90%, driven by economic shutdowns and a decline in exports.

A strong rebound of 7.40% was observed in 2021, supported by increasing demand for natural resources and services. The economy is expected to grow by 2.00% in 2025 and 2.60% by 2030.

India Economic Overview Indian Macro Economic Overview Indian GDP grew at 6.50% in FY2025, driven by strong domestic consumption, a robust services sector, and increasing foreign direct investments (FDI). In FY2025, the real GDP reached INR 187,969.55 Bn, signalling a robust recovery and optimism for sustained economic expansion.

Figure 3: Indian Real GDP (In INR Bn) & Growth Rate (In Percentage), FY2018-FY2025 200,000.00 12.00% )n 180,000.00 10.00% o illiB R N 111 246 000 ,,, 000 000 000 ... 000 000 468 ... 000 000 %%% % n i e I n 100,000.00 2.00% t a r I ( P 80,000.00 0.00% h t D w G 60,000.00 -2.00% o r la 40,000.00 -4.00% G e R 20,000.00 -6.00%

0.00 -8.00% FY2019 FY2020 FY2021 FY2022 FY2023 FY2024 FY2025 Real GDP 139,929.14 145,346.41 136,871.18 150,218.46 161,649.13 176,505.91 187,969.55 Growth Rate 6.50% 3.90% -5.80% 9.70% 7.60% 9.20% 6.50%

Source: Ministry of Statistics and Programme Implementation (MoSPI) | Note: constant prices and base year of 2011-12 | Currency exchange rate taken as of 31st March for the respective year 222Trends & factors for increase in IIP The Index of Industrial Production (IIP) reflects the performance of key industrial sectors, including Mining, Manufacturing, and Electricity, along with the General Index. Manufacturing Index grew by 3.90% in FY2019 but experienced a contraction during the COVID period. The manufacturing IIP was quick to recover in the post COVID and grew 4.70% in FY2023 and 3.90% in FY2025. This momentum is expected to continue.

Figure 4: Growth Rate of IIP in Manufacturing Sector in India (In Percent), FY2019-FY2025

11.80%

5.50%

4.70%

3.90% 3.90% t n e c r e P FY2019 FY2020 FY2021 FY2022 FY2023 FY2024 FY2025 n I -1.40% -9.60%

Source: Ministry of Statistics and Programme Implementation (MoSPI) | Note: constant prices and base year of 2011-12 FDI into India Foreign Direct Investment (FDI) into India has been a key driver of economic growth, fostering advancements in infrastructure, manufacturing, and technology. With investor-friendly policies, a robust domestic market, and strategic initiatives, India continues to remain a favourable investment destination, drawing significant global capital owing to attractive investment opportunities. In FY2025 the FDI into India was around INR 6,896.76 Bn (USD 81.04 Bn). FDI equity inflows into the manufacturing sector increased by 70.00% between FY2014- FY2025, reaching USD 184.15 Bn.

Figure 5: FDI into India (In INR Bn), FY2019-FY2025 7,021.71 6,896.76 6,108.30 5,938.09 5,993.29 5,434.78 n o 4,420.73 illiB R N I n I FY2019 FY2020 FY2021 FY2022 FY2023 FY2024 FY2025

Source: Department for Promotion of Industry anf Internal Trade (DPIIT) | Note : Currency exchange rate taken as of 31st March for the respective year Macro tail winds (China+1)/ Europe + 1 China+1:

The "China+1" strategy is a significant trend among multinational corporations aiming to diversify their manufacturing and supply chains beyond China. This approach has gained traction due to rising costs in China, tariff wars, geopolitical tensions, and disruptions caused by events like the COVID-19 pandemic. As companies seek to mitigate risks associated with over-reliance on a single country, several Asian nations are positioned to benefit from this shift. The beneficiary countries are mentioned below:

2231. India: India is increasingly recognized as a key manufacturing destination, especially for sectors including Pharmaceuticals, IT Services, Electronics and Electronic Components, Metals and Steel, Textiles and Semiconductors. The country presents a compelling manufacturing proposition via cost advantages, readily available technical talent pool, and pro-business government policies. As an example, Google plans to shift Pixel smartphone production from Vietnam to India. Since August 2024, Google has been assembling its Pixel 8 devices locally. The Pixel 8a has also been produced in the country. The entire Pixel 9 series is expected to be manufactured in India prompted by new tariffs on Vietnam. The company is ramping up production for the flagship Pixel 10 Series with Foxconn and Dixon Technologies. The company is also actively considering exports of Pixel devices assembled in India to global markets, including the USA, as part of a strategy to offset higher USA, tariffs on Vietnam and strengthening supply chain resilience.

2. Vietnam: Vietnam has emerged as a primary destination for companies shifting operations due to its low labour costs and improving infrastructure. For instance, major firms like Dell and Apple are increasing their production capacities in Vietnam, with Dell planning for 20% of its laptops to be made in Vietnam.

3. Indonesia and Malaysia: These countries are also benefiting from the China+1 strategy due to their favourable investment climates and participation in regional trade agreements like the Regional Comprehensive Economic Partnership (RCEP), which facilitates trade among member countries.

Europe+1 The "Europe+1" strategy like the "China+1" approach, involves European companies diversifying their manufacturing and supply chains beyond Europe to mitigate risks associated with geopolitical tensions, rising costs, and supply chain vulnerabilities. This strategy is impacting various Asian countries in several ways:

1. India: India is positioned as a major beneficiary of the Europe+1 strategy, attracting substantial foreign direct investment (FDI) from European companies in the manufacturing sector including Aerospace segment. EU had invested around USD 107.27 Bn between the period April 2000- December 2023 into sectors like manufacturing, technology, renewable energy, and services. The country’s large domestic market, competitive labour costs, and improving ease of doing business make it an attractive destination for sectors such as electronics and other manufacturing. The Indian government’s initiatives, including the Production-Linked Incentive (PLI) scheme, further enhance its appeal to European investors looking to establish or expand operations in the region. For example, global players such as Apple and Samsung are scaling up manufacturing capacity in India as part of this strategy, projecting India to account for up to 20.00% of their global production by end of 2025.

2. Vietnam: Vietnam continues to be a favoured destination for European firms due to its established manufacturing base and competitive labour costs. The country has already signed free trade agreements with the EU, which facilitate smoother trade relations. Sectors such as textiles, electronics, and consumer goods are particularly benefiting from increased investment as companies relocate production from Europe and China.

3. Bangladesh: Bangladesh is also experiencing growth in its textile and garment industry, which is a significant sector for European imports. The country’s competitive pricing and capacity for large-scale production make it an attractive option for European brands seeking to diversify their supply chains.

4. Thailand: Thailand is enhancing its role as a manufacturing hub for various industries, including automotive and electronics. The country’s strategic location in Southeast Asia and its existing infrastructure supports its attractiveness to European companies looking to establish a presence in the region.

2245. Indonesia: Indonesia stands to benefit from increased investments in sectors such as agriculture, textiles, and electronics. The government’s efforts to improve infrastructure and ease of doing business are making it a more viable option for European firms seeking alternatives to traditional manufacturing hubs.

Overview of Indian Manufacturing Sector & Export Trends India's manufacturing sector is a key pillar of the economy, contributing 17.00% to GDP in FY2025. Key industries include automobiles, textiles, electronics, chemicals, and pharmaceuticals. Recent government initiatives, such as "Make in India" and production-linked incentives (PLI), have bolstered domestic production and global competitiveness. Exports from the sector have seen steady growth, with engineering goods, refined petroleum, and textiles leading the way. The engineering goods segment includes the engineering goods sector comprises metal products, industrial machinery and equipment, automobiles and their components, transport equipment, bicycles, medical devices, and renewable equipment. India is also emerging as a hub for electronics and pharmaceutical exports.

Figure 6 Indian Manufacturing Exports (In INR Bn), FY2019-FY2026 (Apr-Jun) 36,215.50 36,189.52 37,010.70 31,470.21 n o illiB 23,077.26 22,198.54 21,590.43 R N I 9,608.09 n I FY2019 FY2020 FY2021 FY2022 FY2023 FY2024 FY2025 FY2026 (Apr- Jun)

Source: Ministry of Commerce and Industry Department of Commerce | Note: The major manufacturing exports are: Engineering Goods, Petroleum Products, Gems And Jewellery, Organic & Inorganic Chemical,Drugs And Pharmaceuticals, Rmg Of All Textiles, Electronic Goods, Cotton Yarn/Fabs./Madeups, Handloom Products Etc., Plastic And Linoleum, Marine Products, Rice, Man-Made Yarn/Fabs./Madeups Etc.,Leather And Leather Manufactures, Mica, Coal And Other Ores, Minerals Including Process, Meat, Dairy And Poultry Products, Spices, Ceramic Products And Glassware, Iron Ore, Fruits And Vegetables, Handicrafts Excl. Hand Made Carpet, Cereal Preparations And Miscellaneous Processed Item, Carpet, Oil Seeds, Tobacco, Oil Meals, Tea, Coffee, Cashew, Jute Mfg. Including Floor Covering, Other Cereals and Others, Currency exchange rate taken as of 31st March for the respective year The exports for FY2025 accounted to INR 37,010.70 Bn (USD 440.55 Bn). In FY2026, (3 months duration of April-Jun 2025), the exports have already reached INR 9,608.09 Bn (USD 109.12 Bn), indicating a strong trajectory for the year despite global economic uncertainties.

Indian manufacturers are becoming globally competitive Indian manufacturers are enhancing global competitiveness through innovation, advanced technologies, strategic policies, and increased exports across key sectors.

• Strategic Location: India's location between the Middle East, Southeast Asia, and East Asia offers easy access to key global markets. Proximity to major shipping routes and well-developed ports like Mumbai and Chennai enhance trade efficiency. The Indian Ocean Rim provides access to fast-growing markets in Africa and the Middle East.

• Skilled Workforce: India's workforce is expected to have grown by 33.89 million, from 423.73 million in 2023 to 457.62 million in 2028. Around 44% of the workers are classified above Skill level 2, which indicates a strong proficiency in specific tools and machinery and capacity for performing precision work and technical understanding. India’s substantial annual output of ~1.5 Mn engineering graduates bolsters its labour market, which is further supported by the nation’s demographic advantage as the world’s second-largest English-speaking population, comprising 129 million citizens.

225• Technological Advancements: The integration of automation, robotics, and AI improves production efficiency, scalability, and cost-effectiveness. Industry 4.0 technologies, such as IoT, big data, and cloud computing, optimize operations and supply chains.

• Improving Infrastructure: Heavy investments in transportation networks, such as roads, railways, and ports, improve logistics and connectivity. Initiatives like the Delhi-Mumbai Industrial Corridor (DMIC) and NIMZs provide modern infrastructure tailored for manufacturing.

• Government Initiatives: Programs like "Make in India,” and the Production Linked Incentive (PLI) scheme encourage domestic and foreign investment in manufacturing. The National Manufacturing Policy aims to increase manufacturing’s GDP share and generate employment.

• Ease of Doing Business: Simplified business registration, digitized approvals, and reduced compliance burdens improve ease of operations. The Goods and Services Tax (GST) unify the tax system, enhancing logistics and supply chain efficiency.

• Access to Raw Material: India’s abundant natural resources support various industries, offering a competitive edge in production and manufacturing. • Large Domestic Market: The consumer spending in India is expected to increase to USD 4.30 Tn by 2030, the spending in 2024 was USD 2.40 Tn. The consumer spending is expected to increase around 46% and India would be the second largest global market.

• Cost Competitiveness: India benefits from its cost leadership compared to developed countries, enabling cost-efficient manufacturing.

Increasing Workforce Participation India's workforce has experienced notable growth in recent years, evident from the consistent rise in the Workforce Participation Rate (WPR). In FY2019 the WPR was 47.30% and this had grown to 58.20% in FY2024, signifying increased economic activity and employment opportunities. In FY2025, India’s workforce participation reached

55.00% during the period from April to August. India’s demographic advantage, characterized by one of the world’s youngest populations (50% of the population below 25 years) and increasing workforce participation rate

(WPR), positions the country as a significant source of available talent.

Figure 7: Workforce in India (In Percentage), FY2019-FY2025 (Apr-Aug)

58.20%

56.00% 55.00%

50.90% 52.60% 52.90%

47.30% t n e c r e P n I FY2019 FY2020 FY2021 FY2022 FY2023 FY2024 FY2025 (Apr- Aug)

Source: Periodic Labour Force Survey, Ministry of Statistics and Programme Implementation (MoSPI). Quoted by PIB 226Cost Competitiveness Cost competitiveness in India's manufacturing sector is influenced by several factors, including labour costs, government policies, technological advancements, and infrastructure development.

Figure 8: Average Annual Salary by skilled labour Countrywise (In USD), 2025 131,028.00 y r 93,326.87 a la S la u n n )D S U 67,145.07 A n 52,760.82 e gI( a r 35,468.97 34,662.33 e v A 23,685.23 17,043.58 6,500.00 1,927.02 US Canada Germany China Malaysia Thailand India Philippines Vietnam Bangladesh

Source: SalaryExpert | Note: The above annual salary is for Engineers with 8+ years of experience in manufacturing Cost competitiveness is vital for businesses aiming to reduce production costs. India leads the cost competitiveness with an average salary of USD 23,685.23. The combination of availability of skilled workforce and low labour cost are driving companies to set up their manufacturing units in India.

Structural Reforms and Government initiatives India’s National Manufacturing Policies focus on improving the competitiveness of India’s manufacturing sector and generating employment. Some of the key policies include:

Name of the Reforms/ Objective Key Feature Initiative Increase manufacturing’s GDP share to 25%, Establishment of NIMZs, regulatory National Manufacturing create 100 million jobs, promote global simplification, skill development, green Policy (NMP) competitiveness, support SMEs technology promotion - Transform India into a global - Sector-specific reforms on 27 sectors manufacturing hub - Ease of doing business Make in India 2.0 - Boost employment - FDI liberalization - Increase exports - Branding Indian products globally Promote domestic value addition in Tax incentives for local manufacturing, Phased Manufacturing electronics, especially mobile phones, create phased localization, support for component Program (PMP) jobs ecosystem - Establish National Investment and Manufacturing Zones (NIMZs) - Increase manufacturing share in GDP National Investment & - Simplify regulations - Create 100 million jobs Manufacturing Zones - Focus on skill development and - Enhance global competitiveness

(NIMZs) infrastructure - Promote sustainable growth - Incentives for PPP infrastructure - Emphasis on clean, green technology Financial incentives for incremental sales in Production Linked Boost domestic manufacturing, reduce 14 key sectors, support for exports, FDI Incentives (PLI) import dependency, enhance exports attraction 227Name of the Reforms/ Objective Key Feature Initiative GIS-enabled database of 4,000+ industrial India Industrial Land Facilitate industrial land access, support parks, real-time data, land, and infrastructure Bank (IILB) investment decisions, enhance transparency details GIS-based rating of industrial parks on Industrial Park Rating Enhance competitiveness and transparency infrastructure, business support, safety, System (IPRS) of industrial infrastructure environment One-stop digital portal for 1,000+ approvals, National Single Window Streamline business approvals, improve ease real-time tracking, integrated central/state System (NSWS) of doing business, attract investments services Dedicated cells in ministries for project Project Development Facilitate investment projects, create facilitation, regulatory support, investor Cells (PDCs) investible project pipeline, support investors handholding

Source: Frost & Sullivan Electronics Component Manufacturing Scheme (ECMS): A government initiative aimed at improving India’s self-reliance in electronics manufacturing by promoting large-scale domestic production of essential components.

Introduced under the National Policy on Electronics 2019, the scheme offers financial incentives to companies that set up or expand facilities for producing semiconductors, sensors, displays, printed circuit boards (PCBs), and other vital electronic parts. These incentives are tied to capital investments to ensure long-term growth and competitiveness throughout the value chain.

In alignment with programs such as the Production Linked Incentive (PLI) and SPECS schemes, ECMS supports backward integration, technological innovation, and employment generation. By reinforcing supply chains and improving manufacturing capacity, the scheme is expected to lower import dependence and foster a strong domestic ecosystem. The ECMS serves as a key driver in realizing India’s goal of building a USD 300.00 Bn electronics manufacturing industry by 2026, positioning the country as a prominent global centre for electronics production.

State Policy on Toys and Aerospace Manufacturing:

Karnataka has introduced targeted policies to advance its strengths in toys and aerospace manufacturing, highlighting a strategic emphasis on industrial development and employment generation. These initiatives are aimed at reinforcing the state’s manufacturing foundation by fostering sector-specific growth, driving economic expansion, enhancing technological innovation, and creating job opportunities in key industries.

Karnataka Aerospace and Defence Policy (2022-2027) Karnataka’s Aerospace and Defence Policy aim to position the state as a global hub for aerospace manufacturing.

Key features of this policy include: • Incentives for Investment: The policy offers various incentives for businesses involved in aerospace and defense, including tax breaks and subsidies to attract both domestic and international investments.

• Infrastructure Development: The establishment of Special Economic Zones (SEZs) specifically for aerospace manufacturing, such as the one in Belagavi, provides essential infrastructure and facilities to support manufacturers. This SEZ has already attracted several companies involved in high-tech aerospace components.

228• Skill Development Initiatives: The state government is investing in skill development through training programs and partnerships with educational institutions to ensure a skilled workforce is available for the aerospace sector.

Koppal Industrial Cluster Scheme In parallel, Karnataka is making significant strides in the toy manufacturing sector through initiatives like the Koppal Industrial Cluster Scheme. This initiative includes:

• Koppal Industrial Cluster Scheme: Launched to create India's first dedicated toy manufacturing cluster, this scheme aims to consolidate the toy industry by providing state-of-the-art infrastructure over 400 acres. It is designed to support plastic and electronic toy manufacturers with facilities for design, moulding, assembly, and packaging.

• Investment Attraction: The cluster is expected to generate around INR 5,000 crore in investments and create approximately 40,000 jobs within five years. It aims to attract global toy brands that currently rely on production hubs in countries like China and Vietnam.

• Supportive Ecosystem: Karnataka's existing ecosystem includes tool manufacturing and precision engineering clusters that cater to the raw material needs of the toy industry. Moreover, the region's rich heritage in traditional toy-making provides a unique advantage in terms of skilled labour availability.

• Government Support: The Karnataka government is enhancing support through various reforms, including labour reforms that allow for fixed-term employment, which is beneficial for the seasonal nature of toy manufacturing.

Figure 9: Economic Incentives provided by Koppal Industrial Cluster Scheme

Source: Frost & Sullivan Analysis 229Overall, Karnataka's policies in both aerospace and toy manufacturing are designed not only to boost industrial output but also to create significant employment opportunities while positioning the state as a competitive player on the global stage Contract Manufacturing Market in India Contract manufacturing involves outsourcing of production processes by both domestic as well as international firms to vetted third-party manufacturers for cost efficiency, scalability, and access to specialized expertise. It is a widely adopted model across sectors such as pharmaceuticals, electronics and FMCG, positioning India as one of the leading manufacturing hubs globally. The increasing outsourcing by OEMs enables them to focus on their core offerings while relying on specialized suppliers, such as Aequs, for high-quality components. This shift from standalone suppliers to vertically integrated suppliers, combined with regulatory support and the rising role of India in manufacturing, positions Aequs to favourably capture a larger market share. The growing demand for wearables and personal electronic devices, coupled with OEMs’ China+1 strategy, also positions India as an alternative supply base. India is positioned as a major beneficiary of the Europe+1 strategy, attracting substantial foreign direct investment (FDI) from European companies in the manufacturing sector including Aerospace segment.

Current Landscape of Contract Manufacturing in India The contract manufacturing market in India is INR 2,249.96 Bn (USD 26.78 Bn) in FY2025, with a CAGR of 13.04% between 2025 to 2030, potentially reaching INR 4,152.50 Bn (USD 49.43 Bn) by FY203F.

Figure 10: Contract Manufacturing Market in India (In INR Bn), FY2019-FY2030F CAGR 13.04% 4,152.50 3,771.99 3,391.48 3,010.98 n o 2,630.47 illiB 1,869.45 2,249.96 R N I n I 644.55 FY2019 FY2024 FY2025 FY2026E FY2027F FY2028F FY2029F FY2030F

Source: Frost & Sullivan Analysis | Note : Currency exchange rate taken as of 31st March for the respective year, 1 USD = 85.00 INR from 2025 Onwards This growth is primarily fuelled by the rising demand for various products, particularly in the pharmaceutical, precision engineered components (including Aerospace and Defence components), consumer goods, automotive and auto components, and consumer electronics. Precision components are precise machine parts that are designed and manufactured to exact specifications and are commonly supplied to OEM customers and system integrators.

Contract Manufacturing Trends Emerging trends in contract manufacturing in India reflect the evolving landscape driven by technological advancements, changing consumer preferences, and regulatory shifts. Here are some key trends shaping the

industry:

1. Digital Transformation and Industry 4.0 The integration of digital technologies, automation including the Internet of Things (IoT), artificial intelligence (AI), and big data analytics, is revolutionizing contract manufacturing. These technologies facilitate real-time monitoring, predictive maintenance, and enhanced operational efficiency, allowing manufacturers to optimize production processes and reduce costs.

2302. Customization and Personalization There is a growing demand for personalized products among consumers. This trend is pushing contract manufacturers to adopt flexible production techniques that allow for mass customization without sacrificing efficiency. Technologies like 3D printing and modular manufacturing are enabling quicker production of tailored products to meet diverse consumer needs.

3. Sustainability and Green Manufacturing Environmental concerns are prompting the industry to adopt sustainable practices. Contract manufacturers are increasingly implementing eco-friendly production methods, reducing carbon footprints, and minimizing waste through green principles. This shift not only meets regulatory requirements but also aligns with consumer expectations for sustainable products.

4. Supply Chain Resilience The COVID-19 pandemic highlighted vulnerabilities in global supply chains, leading to a focus on resilience and flexibility. Companies are now prioritizing local sourcing and nearshoring strategies to enhance responsiveness to market changes while reducing lead times and transportation costs.

5. Enhanced Regulatory Compliance Stringent regulatory requirements are driving the need for improved compliance in manufacturing processes. Companies are focusing on Good Manufacturing Practices (GMP) and ensuring data integrity through increased digitization in operations.

Key Players in Contract Manufacturing Aequs competes with major aerospace and consumer electronics component manufacturing companies, as well as major consumer durables companies, both domestic and foreign. Some of the key players operating in India

include: - - Foxconn India - TATA Electronics - Dixon Technologies - Kaynes Technologies - Aequs - Unimech - Azad Engineering - PTC Industries Some of the private players operating in the space are Mahindra Aerospace, Wipro Aerospace and some of the global names in the Aerospace contract manufacturing include Loar Group, Howmet Aerospace, HEICO and Transdigm.

Note: List not exhaustive 231Global Aerospace Manufacturing Market Overall Air Travel & Air Cargo Growth Global air travel and air cargo have witnessed remarkable growth driven by rising demand and economic expansion. The air travel sector continues to recover post-pandemic, supported by increased connectivity and the expansion of low-cost carriers. Meanwhile, air cargo has surged due to e-commerce growth and the need for swift global logistics solutions. Emerging markets, particularly in Asia-Pacific, are driving significant demand in both sectors. Sustainability initiatives, fleet modernization, and digital transformation are shaping the future, as airlines strive to balance growth with environmental concerns, ensuring efficient and resilient air transportation networks worldwide.

Global Air Travel Growth The Global Air Travel has experienced significant fluctuations in passenger growth over recent years due to the impact of the COVID-19 pandemic and subsequent recovery trends. The global air passenger traffic shrank by

60.49% in CY2020 as an aftermath of the pandemic. The market was quick to recover post pandemic witnessing a YoY growth of 28.47%, 46.85% and 28.56% for the years CY2021, CY2022 and CY2023, respectively. The air travel passengers in CY2024 are estimated at 4.22 bn with a YoY growth of 10.71%. The market is expected to surpass pre-covid levels in CY2025. The momentum of growth is expected to continue, and the market is expected to surpass 5.52 Bn passengers by CY2030. The key drivers for growth are Economic Growth and Rising Disposable Incomes, Increasing Global Connectivity, Recovery in Business and Leisure Travel, Rise of Low-Cost Carriers and Advancements in Air Travel Technology.

Figure 11: Global Air Travel Growth (In Bn & In Percentage), CY2019-CY2030F r 6.00 60.00% e g n e s s a)n 5.00 40.00% r iA))% P le v a r T r iAB n I ( 234 ... 000 000 --02 42.0 0

00. 00 ..

00%0 00% %% ( h tw o r G Y o Y n I ( r e g n e s s a P

1.00 -60.00%

0.00 -80.00% CY201 CY202 CY202 CY202 CY202 CY202 CY202 CY202 CY202 CY202 CY202 CY203 9 0 1 2 3 4 5E 6F 7F 8F 9F 0F Air Travel Passengers (In Bn) 3.97 1.57 2.02 2.96 3.81 4.22 4.48 4.70 4.89 5.09 5.28 5.52 Air Travel Passengers (In %) -7.58% -60.49% 28.47% 46.85% 28.56% 10.71% 6.19% 5.00% 4.10% 4.00% 3.80% 3.80%

Source: International Air Transport Association (IATA), International Civil Aviation Organization (ICAO) and Frost & Sullivan Analysis, Global Air Cargo Growth The global air cargo growth has witnessed significant volatility over recent years, influenced by economic shifts, the pandemic, and evolving supply chain dynamics.

232Figure 12: Global Air Cargo Growth (In Mn Tonnes & In Percentage), CY2019-CY2030F

120.00 20.00% )s e n 100.00 15.00% )h t w n n T 80.00 10.00% o r G n M 5.00% Y n 60.00 o Y I ( o

0.00% ( o g 40.00 g r a C -5.00% r a C r iA 20.00 -10.00% r iA

0.00 -15.00% CY20 CY20 CY20 CY20 CY20 CY20 CY20 CY20 CY20 CY20 CY20 CY20 19 20 21 22 23 24 25E 26F 27F 28F 29F 30F Air Cargo (In Mn Tonnes) 62.70 56.50 65.00 60.90 61.40 68.50 72.50 77.21 82.77 88.57 94.85 101.13 Air Cargo (YoY Growth ) 0.32% -9.89% 15.04% -6.31% 0.82% 11.56% 5.84% 6.50% 7.20% 7.00% 7.10% 7.20%

Source: International Air Transport Association (IATA), International Civil Aviation Organization (ICAO) and Frost & Sullivan Analysis The air cargo market witnessed a moderate growth in CY2019, it grew at around 0.32%. The market experienced a decline of 9.89% in CY2020 due to the impacts of COVID. The cargo market grew 15.04% in CY2021 owing to the fulfilment of the backlog demand. Air Cargo Growth resumed in CY2023 at 0.82%, and CY2024 is projected to further expand at 11.56%. The air cargo market is expected to grow to 101.13 Mn tonnes by CY2030, this is supported by global economic growth.

Global Aircraft Orders The increase in aircraft orders globally between CY2019-CY2025 reflected a notable shift in aviation industry’s performance. In CY2019, Airbus and Boeing received 1,131 and 243 orders, respectively. However, in CY2020 Boeing’s and Airbus orders sharply dropped to 184 and 383. On the back of global economic growth, the revenue realization by the airlines in the post COVID recovery period showcased optimism to the overall industry, which led to the increase in aircraft orders in CY2023 for both the OEMs.

Figure 13: Global Aircraft Orders (In Units), CY2019-YTD2025 2,319 1,456 s t in U 1,131 1,078 n I 771 909 935 878 725 569 600 383 243 184 CY2019 CY2020 CY2021 CY2022 CY2023 CY2024 YTD2025 Airbus Boeing

Source: Airbus & Boeing | Note: YTD 2025 data as on August 31st 2025 A strong recovery began in CY2021, as both companies experienced notable growth, with Airbus reaching 771 orders and Boeing surging to 909. The upward trend continued into CY2022, with Airbus securing 1,078 orders and Boeing slightly behind at 935. As on 31st August 2025, Airbus and Boeing had received 600 and 725 aircraft orders, respectively.

Due to the large order backlogs and stringent delivery timelines, it becomes even difficult for the OEMs to onboard a new supplier which creates an additional barrier to entry. The complexity involved with onboarding new suppliers coupled with the aggressive production plan increase by Airbus and Boeing results in the existing suppliers having a disproportionate share in the backlog.

233Global Aircraft Deliveries Figure 14: Growth in Aircraft Deliveries and Backlogs (In Units), CY2019-YTD2025 14,814 15,255 14,253 13,107 12,181 12,218 12,669 s tin U n I 1,243 723 951 1,143 1,263 1,203 819 CY2019 CY2020 CY2021 CY2022 CY2023 CY2024 YTD2025 Aircraft Deliveries Aircraft Backlogs

Source: Airbus & Boeing | Note: YTD2025 data as on August 31st 2025 In CY2019, aircraft manufacturers delivered 1,243 aircraft, which slightly declined to 819 by CY2025. At the same time, aircraft backlogs increased from 13,107 in CY2019 to 15,255 in YTD2025, highlighting sustained demand for new aircraft. The long-term outlook for the aircraft component suppliers looks optimistic. The aggressive expansion plans of Airbus and Boeing to increase the aircraft monthly production numbers over the next few years, gives these two companies limited flexibility to shift suppliers, owing to strict onboarding requirements and higher cost of switching. Boeing aims to produce 10,787 Dreamliners per month by 2026 an increase of 3 units compared to 2025. Similarly, it plans to increase its production to 50 aircraft by 2026, an increase of 12 from the existing production plan. Airbus also has plans to increase its A320 production to 75 per month by 2027.

Fleet Replacements The expected number of new aircraft deliveries between 2024 and 2043 is 42,430, representing significant growth in the aviation industry over the next two decades. In 2023, there were 24,260 aircraft in operation, with the total expected to increase to 48,230 by 2043. Around 23,970 aircraft will be added to accommodate expanding demand, 18,460 aircraft will replace older models, and 5,800 aircraft will remain in service. This projection highlights the dual focus on both increasing capacities to meet rising global travel needs and modernizing existing fleets for improved efficiency and sustainability.

Figure 15: Fleet Replacement (In Units), 2023-2043F

Source: Airbus Global Market Forecast 234Key Trends in the Aerospace Market The global aerospace market is undergoing significant transformation, shaped by several critical trends:

Global Supply Chain: Outsourcing of component manufacturing is growing as companies recognize the potential for cost savings and access to specialized expertise. OEMs are increasingly concentrating on core design and final assembly, while increasingly relying on Tier-1 and Tier-2 suppliers to produce components.

Sustainability Focus: The aerospace industry is increasingly embracing eco-friendly technologies to minimize its environmental impact. The growing adoption of Sustainable Aviation Fuels (SAFs) is enabling airlines to reduce emissions while maintaining operational efficiency. To achieve cost savings and meet environmental targets, airlines are investing in fuel-efficient aircraft. Meanwhile, global OEMs are placing greater emphasis on Environment, Health, and Safety (EHS), driving the need for suppliers capable of manufacturing multiple components within a single facility. This is in line with the high5+ targets, wherein one of the parameters is to reduce the CO2 emissions by 65% by 2030, compared to 2015.The industry continues to focus on using sustainable materials, cutting emissions, and ensuring workplace safety to comply with international environmental standards. This shift from standalone suppliers to vertically integrated suppliers, combined with regulatory support and the rising role of India in manufacturing, positions Aequs favourably to capture a larger market share.

Digitalization and Industry 4.0: Integration of advanced technologies such as AI, big data, and IoT are improving aerospace manufacturing by enhancing efficiency, enabling predictive maintenance, and optimizing supply chains.

Geopolitical and Supply Chain Resilience: Global disruptions are pushing companies to build resilient supply chains through supplier diversification and flexible production strategies.

Autonomous and Electric Aircraft: Electric propulsion, drones, and autonomous flight systems are transforming air travel. Urban Air Mobility (UAM) concepts, like air taxis and delivery drones, offer faster, more efficient city transportation while reducing emissions.

Aerospace Component Value Chain The aerospace component supply chain is a complex network of manufacturers, suppliers, and distributors that deliver components and materials required for the design, production, and maintenance of aircraft, spacecraft, and defense systems. It spans multiple countries and industries, including electronics, materials science, and precision engineering.

The aerospace component value chain involves several critical stages, each influencing cost and quality. The process begins with raw material procurement, where advanced metals, such as titanium, composites, and alloys are sourced. Very few manufacturers in India like Aequs have niche metallurgy capabilities, specializing in precision machining of high-end alloys, including titanium alloys for their aerospace clients. Material costs depend on availability, supplier reliability, and regulatory compliance. Maintaining quality at this stage requires stringent material testing and adherence to aerospace-grade standards. Extensive testing and validation processes required to fulfil very specific product requirements and stringent quality requirements by aerospace OEM customers create a significant barrier to entry for new market entrants. The value chain starts with sourcing of raw materials, followed by manufacturing at the component level, which are then assembled and integrated to small subsystems.

The subsystems are then shipped out to the OEMs to be integrated into the aircraft systems.

Manufacturing and machining follow, where high-precision techniques such as CNC machining, additive manufacturing, and specialized coatings contribute to both cost efficiency and quality assurance. Advanced automation and robotics optimize production costs while ensuring accuracy and consistency. Quality control measures, including non-destructive testing (NDT) and real-time monitoring, help detect defects early, preventing costly rework or failures.

Assembly and integration further impact cost and quality. Rigorous validation processes, functional testing, and digital simulations ensure aerospace components meet safety and performance standards. While these steps add to manufacturing expenses, they reduce long-term operational costs by enhancing reliability.

Lastly, logistics and aftermarket services influence total lifecycle costs. Efficient supply chain management, optimized transportation, and predictive maintenance strategies help manage expenses while ensuring high- 235performance components. The aerospace component value chain requires a delicate balance between cost efficiency and uncompromised quality to meet industry and regulatory demands.

Figure 16: Aerospace Component Value Chain

Source:Frost & Sullivan Analysis The aerospace component supply chain in this sector involves forging, machining, and surface treatment, followed by shipping for final aero assembly. To align with the carbon emission reduction mandates from Airbus and Boeing, these OEMs have Optimized operations by minimizing the movement of parts between supplier locations.

This effort is part of their strategy to lower carbon footprint. Aircraft OEMs prefer suppliers with end-to-end capabilities over those with standalone capabilities. Aequs is a leading company within a single SEZ in terms of end-to-end manufacturing capabilities (machining, forging, surface treatment, and assembly) for the aerospace segment in India, based on the number of capabilities and approvals. Airbus, Boeing, and other aircraft integrators follow a rigorous supplier selection process, adhering to global standards and regular audits. The aerospace manufacturing ecosystem in Belagavi, Karnataka, hosts the Aerospace Processing India Private Limited (API) surface treatment plant, which is among the first few facilities in India to be approved by both Airbus and Boeing.

API has NADCAP accreditation for chemical processing, surface enhancement, and non-destructive testing, all of which are critical capabilities across the aerospace industry. Aequs’ aerospace manufacturing ecosystem in Belagavi, Karnataka hosts one of the largest precision machining capacities in India, at over 2.92 Mn consolidated machining/Moulding Hours (Annual Installed Capacity). Manufacturing aerospace components involves stricter processes and stringent quality control measures compared to automotive component production, as illustrated in the figure below.

Figure 17: Complexity Involved in Aerospace Components Manufacturing compared to Automotive Component Manufacturing Aerospace Components Manufacturing Automotive Components Manufacturing Precision Requires ultra-high precision (up to 4 microns) Precision needed, but tolerances (10–50 microns) Requirements due to strict safety standards. are generally more flexible Complexity of Features intricate geometries and lightweight Generally simpler designs focused on mass Designs structures needing advanced machining. production efficiency.

Utilizes high-performance alloys like titanium, Uses cost-effective materials like steel, Materials Used requiring specialized machining. aluminium, and plastics for high-volume use.

Manufacturing Employs advanced tech like 5-axis CNC and Relies on traditional CNC and automation; focus Technologies additive manufacturing for complex parts is on cost and efficiency Vendor Lengthy and certification-heavy (e.g., Faster onboarding with easier certification, Onboarding and NADCAP); high entry barriers. driven largely by cost and specifications Timeline

Source:Frost & Sullivan Analysis 236Sourcing of Airbus from India Airbus has significantly increased its sourcing from India over the past decade, and this has helped India to evolve into a crucial player in the global aerospace supply chain. This growth is driven by a combination of strategic partnerships, government initiatives, and the country's expanding manufacturing capabilities. The below figure shows the expansion of Airbus sourcing from India between the period FY2016 to FY2024. The company has an

order of around 1.000 aircraft from Indigo and Air India.

Figure 18: Sourcing of Airbus from India, FY2016- FY 2024

Source: Frost & Sullivan Analysis Sourcing of Boeing from India Boeing sources around USD 1.25 bn annually through its 300+ supplier from India, out of which over 25.00% are from the Micro, Small and Medium Enterprises (MSMEs) segment. The sourcing from India has grown from USD

250.00 Mn to more than USD 1.00 Bn between the period CY2014 to CY2024.

Global Aerospace Clusters – Introduction Global aerospace clusters are geographic regions that specialize in aerospace and defense manufacturing, research, and development, fostering innovation, collaboration, and economic growth. These clusters often consist of a network of companies, research institutions, and government agencies that work together to advance aerospace technologies, share expertise, and drive industrial growth.

The United States is home to several major aerospace clusters, including the well-known "Aerospace Valley" in Southern California. This region is a hub for commercial, military, and space aerospace industries, hosting companies like Northrop Grumman, Boeing, and SpaceX. The Seattle area, with Boeing’s large manufacturing facilities, is another key cluster, focusing primarily on commercial aircraft production.

In Europe, Toulouse, France, is a significant aerospace cluster, home to Airbus and several key suppliers. The city is a global leader in civil aviation manufacturing and innovation. The UK also has strong aerospace clusters, notably in the Midlands, where Rolls-Royce and other suppliers contribute to both civil and military aerospace developments.

In Canada, the Montreal region is a prominent aerospace hub, home to Bombardier and several major aerospace suppliers. This cluster specializes in civil aviation manufacturing, particularly regional jets, and is supported by strong research and development initiatives.

Emerging aerospace clusters are also found in Asia. For example, China is investing heavily in its aerospace sector, with clusters emerging in cities like Chengdu and Xi'an, aiming to become a major player in commercial and 237military aviation. Additionally, Belagavi Aerospace Cluster (BAC) in Karnataka, India, which is recognized as the country’s first Precision Manufacturing Special Economic Zone (SEZ) and Aequs operates in this cluster. The integrated end-to-end manufacturing capabilities of Aequs in a single cluster have enabled their customers to reduce their transportation costs as Aequs is able to manufacture and supply products under one roof at their manufacturing cluster. Aequs is differentiated by their advanced manufacturing capabilities, including machining, forging, surface treatment, and plastic moulding, within a single SEZ which they have developed over the past 15 years.

Figure 19: Global Aerospace Industrial Clusters, 2024

Source: Frost & Sullivan Analysis Global Benefits of Aerospace Industrial Cluster Aerospace industrial clusters offer numerous advantages that enhance the competitiveness and efficiency of companies operating within them, as listed below:

Clusters bring together a diverse range of specialized companies, research institutions, and skilled labour, fostering innovation and collaboration in aerospace technologies. The increasing emphasis by global OEMs on environmental, social and governance related issues, has resulted in their preference to work with suppliers with integrated, end-to-end manufacturing capabilities in a single cluster, such as Aequs, to reduce global carbon footprint.

• Supply Chain Efficiency Proximity to suppliers reduces transportation costs and lead times, enabling just-in-time manufacturing and improving overall supply chain responsiveness. Clusters enable companies to integrate more effectively into international supply chains, enhancing their ability to meet global demand for aerospace products. Aequs is the only precision component manufacturer in a single SEZ in India to offer fully vertically integrated manufacturing capabilities in the aerospace Segment, which sets them apart from other contract manufacturers with selective manufacturing capabilities amongst the peers. They operate in three unique engineering-led vertically integrated precision manufacturing “ecosystems” in India.

• Competitive Advantage The presence of multiple players within a cluster fosters competition, driving continuous improvement and innovation among companies, which ultimately benefits consumers. The aerospace component and consumer product industries are highly competitive, and Aequs competes with other aerospace 238component and consumer product manufacturers based on a variety of factors, including pricing, manufacturing capabilities, technology, innovation and product development time and service levels.

• Access to Skilled Workforce Aerospace clusters often have a well-developed talent pool, supported by local universities and training programs that produce highly skilled workers essential for the industry.

• Cost Reduction Local sourcing within clusters can lead to significant cost savings for aerospace manufacturers by minimizing logistics expenses and enhancing procurement processes. • Economic Impact and Support The economic activity generated by clusters can attract government support, including tax incentives and grants, which further stimulate growth and investment in the aerospace sector.

Global Commercial Aircraft Programs The commercial aircraft manufacturing market is a duopolistic market with two dominant players, namely Boeing from the US and Airbus from Europe. The most successful models of Airbus and Boeing are A320 and B737, respectively. These models account for over 75.00% of the deliveries to both Airbus and Boeing.

Figure 20: Global Commercial Aircraft Programs

Source: Airbus & Boeing | Note: The backlog for is up to Febraury 2025 Airbus A320 Family: In 2024, Airbus delivered 766 aircraft across its major models, with the A320 series leading at 602 deliveries. The A350, a popular long-haul aircraft, recorded 57 deliveries, while other models, including the A330 and A220, accounted for 107 units. Despite these deliveries, Airbus continues to experience strong demand, as seen in its growing order backlog. As of February 2025, the A320 family has 7,188 pending orders, reinforcing its leadership in the narrow-body market. The A350 has 718 orders, reflecting its appeal for long-haul operations, while other Airbus models collectively hold a backlog of 746 aircraft.

Boeing B737 Family: In 2024, Boeing delivered 348 aircraft, with the 737 leading at 265 deliveries, followed by 51 units of the 787 and 32 from other models. Despite steady deliveries, demand for Boeing aircraft remains high, as seen in its growing order backlog. As of February 2025, the Boeing 737 has 4,747 pending orders, highlighting its dominance in the narrow-body segment. The 787, favoured for long-haul operations, has 787 orders in the pipeline. Other Boeing models, including the 777 and 767, account for 663 backlogged orders.

The aircraft manufacturing industry has high entry barriers for new suppliers due to stringent regulatory requirements, substantial capital investment, and long certification processes. Aerospace components must meet strict safety, reliability, and performance standards, requiring extensive testing and approvals from authorities like 239the FAA and EASA. The industry demands advanced manufacturing capabilities, specialized materials, and precise engineering, making entry costly. Additionally, established OEMs prefer trusted suppliers with proven track records, creating challenges for newcomers. There is a high barrier to entry to enter precision manufacturing business segments, due to the substantial investment required to establish advanced precision manufacturing capabilities, develop proof of concept, and cultivate relationships with global OEMs. Long development cycles, rigorous quality control, and adherence to global aviation regulations further limit new entrants, making it difficult for new suppliers to enter the aerospace supply chain.

Region wise Sourcing of Key Global Commercial Aircraft programs Aerospace supply chains are characterized by multiregional procurement i.e., sourcing materials, components, and services from multiple geographic regions to optimize cost, efficiency, and supply chain resilience.

Figure 21: Regionwise Sourcing of Key Global Commercial Aircraft Programs, CY2024

Source: Frost & Sullivan Analysis Aerospace manufacturers often rely on global suppliers for a variety of components such as avionics, engine parts, landing gear, and composites, which are sourced from regions like North America, Europe, Asia, and others. As on 1 September 2025, the US will apply only the MFN tariff to specific European Union (EU) products, including unavailable natural resources (such as cork), all aircraft and aircraft parts, and generic pharmaceuticals along with their ingredients and chemical precursors. Both the United States and the EU further agree to evaluate additional sectors and products of mutual economic and strategic importance for possible inclusion under the MFN-only tariff treatment. This would ensure continuity of the aerospace supplies between US and EU there by avoiding any supply chain challenges. This would also ensure the stability of global aerospace supply chain. This approach allows companies to tap into specialized expertise, take advantage of lower labour costs, and secure high-quality materials. To mitigate these risks, aerospace companies adopt strategies like diversifying their supplier base, implementing robust risk management frameworks, and leveraging digital tools for supply chain visibility and tracking.

Critical Success Factors for Aerospace Component Manufacturers The global aerospace component manufacturing market is marked by intense competition, requiring companies to succeed in key areas known as Critical Success Factors (CSFs):

240Figure 22: Critical Success Factors for Aerospace Component Manufacturers

Source: Frost & Sullivan Analysis • Global Presence and Establishing Capacity Closer to the Customer: A global presence is crucial for reducing lead times, logistics costs, and operational inefficiencies. Locating production facilities near key customers ensures faster response times and fosters closer collaboration and regular interactions with key customers. This strategy also mitigates geopolitical risks, leverages local talent pools, and meets regional compliance requirements. By balancing global reach with local responsiveness, manufacturers enhance customer satisfaction and build a competitive edge in diverse markets.

• Integrated Capabilities– Ability to Manufacture Components End-to-End: Backward integration enables manufacturers to control quality, costs, and supply chain reliability. By managing processes from raw material sourcing to finished components, companies reduce dependence on external suppliers and streamline operations. Integration of value-addition supply chain also offers sustainability benefits, enabling customers to reduce their global carbon footprint. This approach ensures consistency, mitigates risks, and allows for customization to meet specific customer needs. Comprehensive capabilities like forging, machining, and surface finishing position manufacturers as reliable, one-stop solution providers.

Global aerospace companies, such as Airbus and Boeing are focused on enhancing their supply chain efficiency and accordingly, prefer suppliers who are able to offer “one-stop-shop” capabilities to support their complex manufacturing and integration needs, due to the benefits associated with quality management, cost and working capital efficiencies (for instance, on account of reduced logistics and warehousing costs as a result of co-located facilities), reduced lead times and reduced global carbon footprint • Engineering Capabilities: Engineering excellence is essential for aerospace manufacturers. Precision machining, metallurgical expertise, and the ability to work with complex alloys are critical. Robust R&D efforts ensure innovative, cost-effective solutions that meet stringent aerospace standards. These capabilities not only optimize component design and performance but also establish the manufacturer as a trusted partner for high-quality, customized solutions. Extensive testing and validation processes required to fulfil very specific product requirements and stringent quality requirements by aerospace OEM customers create a significant barrier to entry for new market entrants • Ability to Scale Up Quickly: Rapid scalability is vital to adapt to market demands and new aerospace programs. Manufacturers must showcase access to resources like land, labour, capital, and raw materials.

Flexible infrastructure, skilled workforces, and strong supplier networks enable quick expansion without compromising quality. Companies that demonstrate operational agility gain a competitive advantage by reliably meeting customer requirements and leveraging growth opportunities.

241• Technology – In-House as Well as Technical Collaborations/JVs: Advanced technology drives efficiency and precision in aerospace manufacturing. Investments in automation, additive manufacturing, and Industry 4.0 practices enhance productivity and quality. Collaborations and JVs provide access to cutting-edge innovations, while certifications like AS9100 and NADCAP establish credibility. A strong focus on technology and compliance ensures manufacturers stay competitive and meet evolving industry standards.

• Customer Relationships: Strong customer relationships are key to long-term success. Establishing LTAs provides demand visibility and resource planning stability. Cost pass-through mechanisms protect margins against material price fluctuations. Proactive communication, consistent quality, and problem- solving strengthen trust and collaboration. By aligning with customer needs, manufacturers secure repeat business and position themselves as preferred suppliers in a competitive aerospace component market.

Aequs is one of the few precision component manufacturers in India in the aerospace segment with a presence in three continents, which enables access to skilled workforce with diverse backgrounds and expertise, apart from the closeness to the customer which helps in its long-term customer relationships.

Accordingly, Aequs has a significant market opportunity, driven by favourable industry trends, the unique approach to manufacturing, through the manufacturing ecosystems, and their diversified business model and product portfolio enable them to generate growth and profitability and enhance operational efficiency.

Evolving Business Models (Shift towards integrated players than multiple players) The global aerospace manufacturing market is experiencing a major transformation, shifting from traditional business models to more integrated approaches. Traditionally, the industry functioned with various players— OEMs, suppliers, subcontractors, and service providers—each performing distinct roles with limited collaboration.

Figure 23: Evolving Business Models

Source: Frost & Sullivan Analysis This model is evolving as companies increasingly pursue integration, fostering stronger relationships throughout the value chain.

242• Stage 1: Traditional Model/ Transaction Model In the conventional framework, aerospace manufacturers and suppliers operated independently, with clearly defined roles and minimal collaboration beyond contractual agreements. While this approach was effective in the past, it often resulted in inefficiencies and challenges in adapting to rapid industry changes or innovation demands.

• Stage 2: Cooperative Model As competition intensified and globalization expanded, aerospace companies began adopting cooperative models.

This strategy promotes collaboration among different entities within the supply chain, such as OEMs and tiered suppliers, to share resources, lower costs, and enhance operational efficiency. By working together, companies can leverage expertise, access new markets, and strengthen their global positions.

• Stage 3: Collaborative Model The collaborative model further enhances cooperation by encouraging manufacturers and suppliers to work closely together and share information, technologies, and innovations for co-development. This integrated approach enables quicker responses to market demands, such as the push for more sustainable aircraft or advanced technologies. Collaboration often extends into product development, with joint teams focusing on design, testing, and production to achieve faster time-to-market and more tailored solutions.

• Stage 4: Joint Venture/ Partnership Model In the partnership model, companies establish long-term strategic agreements that promote mutual growth and stability. This model typically involves shared risks and rewards as partners collaborate on specific projects or product lines. For instance, a supplier might form a long-term partnership with an OEM to secure the supply of critical components for a particular aircraft program. Such arrangements help stabilize the supply chain while ensuring both parties meet production schedules and quality standards.

• Stage 5: Strategic Partnership Model Leading this evolution is the strategic partnership model, where aerospace companies forge deep alliances not only within the supply chain but also across industries. These partnerships often involve collaborations with technology firms or research institutions to drive innovation in areas like digitalization, sustainability, and advanced manufacturing technologies. Strategic partnerships focus on shared objectives such as enhancing product performance, minimizing environmental impact, and developing disruptive technologies like autonomous aircraft or electric propulsion systems. These collaborations are vital for maintaining competitiveness in a rapidly evolving industry by enabling manufacturers to combine expertise, reduce costs, and accelerate innovation.

Current Challenges in the Global Aerospace Sector The aerospace sector is facing several significant challenges that are shaping its future, stemming from technological, regulatory, economic, and environmental pressures.

1. Fulfilment of Order Backlog The total order backlogs as of end of 2024 was around 14,158 aircraft, out of which around 5,500+ aircraft account to Boeing and the rest 8,658 accounts to Airbus. These strong backlogs ensure a regular work flow from Airbus and Boeing to all its suppliers across it supply chain.

2432. Supply Chain Disruptions The global aerospace supply chain remains under strain, exacerbated by geopolitical tensions and trade conflicts.

These disruptions have led to delays in the delivery of essential components, hindering production schedules and increasing costs. With aerospace manufacturing highly reliant on precise timing and quality, disruptions in any part of the supply chain can significantly affect the overall delivery timeline of aircraft.

3. Availability of Skilled Manpower The aerospace industry is grappling with a severe manpower shortage, driven by rising demand, an aging workforce, and shifting workforce dynamics. As air travel rebounds and defense spending surges due to geopolitical tensions, the need for skilled workers has outpaced supply. The industry faces a growing skills gap, particularly in advanced digital roles like AI and robotics, while traditional technical expertise remains critical. In case of US, there is a demographic challenge: 25% of the workforce is nearing retirement age, taking with them institutional knowledge that is difficult to replace. Similarly, in the European Union, workers aged 55 and above account for around 16% of the workforce, with nations like Germany, Finland, and Sweden nearing 20% in this age group.

4. Sustainability Pressures Environmental concerns are pushing the aerospace sector to reduce carbon emissions and improve fuel efficiency.

The pressure to develop and adopt greener technologies, such as electric and hybrid-electric aircraft, is increasing.

However, the development of these technologies remains challenging due to high costs, limited infrastructure, and the long development cycles required for new aircraft types.

Market Size- Global Aerospace Manufacturing Global aerospace manufacturing is a critical industry that drives technological advancement and economic growth worldwide. This duopolistic market is dominated by Boeing and Airbus, the industry operates through a complex, interconnected global supply chain. Key trends shaping the sector include a focus on sustainability, with advancements in greener technologies, and the adoption of Industry 4.0 innovations such as AI, automation, and additive manufacturing. While challenges like geopolitical tensions and supply chain disruptions persist, the industry continues to adapt, fostering innovation and supporting aviation and space exploration. The global aerospace market was expected to grow from USD 188.04 Bn in CY2024 to USD 272.56 Bn in CY2030 at a CAGR of 6.38% between the given period.

Figure 24: Global Aerospace Market Size (In USD Bn),CY2019-CY2030F CAGR6.38%

263.27 267.88 272.56 CAGR-1.76% CAGR-1.76% 242.50

223.61

205.48 208.04

188.04

169.68

152.45

127.85

109.27 CY2019 CY2020 CY2021 CY2022 CY2023 CY2024 CY2025E CY2026F CY2027F CY2028F CY2029F CY2030F

Source: Frost & Sullivan Analysis | Note: The above market is for commercial aircraft Aircraft Breakdown by Sub-Systems The aircraft sub-system had been broadly segmented into aerostructures, engines (powerplant), landing gears, interiors, electrical components, and communication & navigation systems. The aerostructures can be further 244segmented as fuselage, wings, and empennage. The engines account to around 40% of the total cost of the aircraft (this would vary based on the aircraft model). The rest of the approximate cost breakdown are shown in the figure below.

Figure 25: Aircraft Breakdown by Sub-Systems (In Percentage)

Source: Researchgate and Frost & Sullivan Analysis The global aircraft components market, including engines, aerostructures, interiors, landing systems, doors, turnings, and actuation systems, has experienced fluctuations over recent years.

Figure 26: Aircraft Breakdown by Sub-Systems (In USD Bn), 2019-2030F

Source: Frost & Sullivan Analysis| The aircraft sub systems are expected to grow from USD 188.04 in 2024 to USD 272.56 by 2030 at a CAGR of

5.55%. This growth is driven by increased global aircraft production, technological advancements, and the demand for more fuel-efficient and lightweight components. With rising air traffic and fleet modernization, manufacturers are investing in next-generation materials and automation to enhance efficiency and reduce operational costs.

Indian Aerospace Manufacturing Market India's aircraft manufacturing market is rapidly growing, fuelled by rising air travel demand and e-commerce. The country is emerging as a key hub for aircraft manufacturing, assembly, and maintenance due to its strategic location and economic growth. A shift toward indigenous production is evident, with companies like Hindustan Aeronautics Limited (HAL) collaborating with global giants like Airbus and Boeing to enhance local manufacturing capabilities.

245Increase in Export of Aerospace Engineered Components from India:

India's export of aerospace-engineered components had witnessed significant growth, reflecting the country's rising capabilities in precision manufacturing and its expanding role in the global aerospace supply chain. In FY2019, aerospace component exports accounted to INR 119.37 Bn (USD 1.71 Bn), driven by increased participation of Indian manufacturers in global aerospace programs, government initiatives like Make in India, and strategic partnerships with leading international aerospace firms.

In FY2025, the exports reached INR 588.38 Bn (USD 6.96 Bn). The push towards self-reliance in defense and aerospace, along with favourable policies and infrastructure development, is positioning India as a key supplier of high-quality aerospace components to global markets. Aequs has one of the largest portfolios of aerospace products in India, as of 31st March 2025.

Figure 27: Increase in Export of Aerospace Engineered Components from India (In INR Bn), FY2019-FY2025

Source: Ministry of Commerce | Note: The above data inncludes Aircraft parts and space parts, Aircraft Orders- India Aircraft Orders – India India has emerged as one of the most significant markets for aircraft orders, reflecting the rapid growth of its aviation sector. A booming economy, increasing middle-class affluence, and expanding urbanization have driven the demand for air travel in India. These factors, coupled with a growing appetite for domestic and international travel, have spurred Indian airlines to expand and modernize their fleets significantly.

Major Indian carriers have been aggressively placing aircraft orders to meet this increasing demand. The major airlines which have placed orders from India are Air India, IndiGo, and Akasa Air. These aircraft orders are not just about expanding capacity; they also reflect the broader strategic goals of Indian airlines to modernize their fleets. In FY2024, IndiGo accounts for around 47.59% of the total Indian commercial aircraft fleet. Air India has the second largest fleet in India; it accounts for around 17.43% of the total Indian fleet. Majority of the orders are from three major airlines in India namely, IndiGo which has around 916 aircraft orders followed by Air India accounting to 344 aircrafts orders. The airline with the third largest aircraft order in India is Vistara at around 56.

The total number of aircraft order backlogs from India accounted to approximately 1,260 as of June 2025.

246Figure 28: Total Indian Fleet, FY2024

Source: DGCA | Note: Others include AIX Connect, Fly 91, FlyBig, Indiaone Air, Start Air The merger between Air India and Vistara was officially completed on November 12, 2024, creating a unified full-service airline under the Air India brand. This strategic consolidation enables the new entity to operate over 5,600 weekly flights to more than 90 destinations with a fleet of 208 aircraft. The integration aims to enhance operational efficiency and financial stability.

Figure 29: Total Indian Fleet, FY2024-FY2030F CAGR13.45% 1,640 1,495 1,350 1,205 1,059 e z 914 iS te 769 e lF FY2024 FY2025 FY2026E FY2027F FY2028F FY2029F FY2030F

Source: DGCA and Frost & Sullivan Analysis The Indian commercial aircraft fleet size was 769 aircrafts in FY2024 and this is expected to grow at a CAGR of

13.45% and reach 1,640 by FY2030. The increase in Indian air travel is a key driver for the growth of the commercial aircraft fleet in India.

Government Initiatives & Reforms The Make in India initiative, launched in 2014, has played a crucial role in advancing India’s commercial aerospace manufacturing sector. The initiative aims to make India a global manufacturing hub by encouraging both domestic and foreign companies to establish production facilities within the country. These partnerships have facilitated the transfer of advanced technologies and expertise, enhancing India's ability to produce high-quality aerospace components such as fuselage sections, wings, engines, and landing gears.

Overall, Make in India has significantly strengthened India’s position in the global aerospace market, driving innovation, investment, and the development of a competitive, self-reliant aerospace manufacturing ecosystem. A

few successful projects as an outcome of the Make in India Initiatives are:

247- GE Aerospace announce its plan to invest more than INR 2.40 Bn to expand its manufacturing facility in Pune, this was announced in 2024. This investment will enable the facility to undertake new projects and manufacturing processes, including the acquisition of machinery, equipment, and specialized tools, while also boosting the capacity for existing products.

- SAFHAL, a joint venture between Safran Helicopter Engines SAS and Hindustan Aeronautics Limited, focuses on the design, development, production, sales, and support of next-generation helicopter engines in India. This venture represents a major milestone for India's aerospace and defense sector, with the goal of strengthening the country's Aatmanirbharta self-reliance) in helicopter engine technology.

- Hindustan Aeronautics Limited (HAL) and Airbus have signed a contract to set up a Maintenance, Repair, and Overhaul (MRO) facility for the A320 (Airbus 320) aircraft family. This collaboration aims to enhance the support infrastructure for the A320 (Airbus 320) fleet in India, improving maintenance capabilities and ensuring better service for operators, thereby strengthening the aerospace sector in the country.

Specific initiatives under Make in India - PLI Scheme for Aerospace and Drone Sectors: The Production Linked Incentive (PLI) scheme for drones, initiated on September 30, 2021, aims to enhance domestic manufacturing in the drone sector. It offers incentives amounting to Rs. 120 crores over three years, with a 20% incentive on value addition, thereby promoting indigenous development and reducing import dependency.

- Bhartiya Vayuyan Vidheyak Bill 2024: The Bhartiya Vayuyan Vidheyak Bill 2024 replaces the Aircraft Act of 1934, modernizing India's aviation regulatory framework. It establishes a robust governance structure for civil aviation, focusing on safety, security, and environmental sustainability while facilitating growth in the aviation sector through streamlined regulations and enhanced oversight.

- Revised FDI Limit in Defense Manufacturing: The revised Foreign Direct Investment (FDI) policy in defense manufacturing aims to attract more foreign investment by increasing the limit to 74% in certain sectors. This move is designed to bolster local manufacturing capabilities, enhance technology transfer, and support India's self-reliance in defense production by inviting global players to invest in the Indian market.

248Indian Aerospace Supply Chain Figure 30: Sourcing and No of Suppliers of Airbus and Boeing from India, FY2024

Source: Frost & Sullivan Analysis | Note : Currency exchange rate taken as of 31st March for the respective year Global aircraft Original Equipment Manufacturers (OEMs) such as Boeing and Airbus sourced (which includes components and sub-assemblies) around INR 193.39 Bn from India in FY2024. Boeing sources from ~300 suppliers in India, contributing to a procurement value of INR 103.75 Bn. Similarly, Airbus engages with ~100 Indian suppliers, accounting for sourcing worth INR 89.64 Bn.

Airbus Suppliers from India The Airbus procures aircraft flying parts and engineering service from India. Airbus is expanding its supplier base to increase procurement from India. There are more than 100 suppliers from India, which account to around USD

1.40 Bn in sourcing value for the year FY2025.

Detailed Parts Partner (D2P) aerospace suppliers in India play a crucial role in the global aviation and defense ecosystem. (There are around 100 D2P suppliers globally). Major players in aerospace component manufacturing in India include Aequs, Tata Advanced Systems, Hindustan Aeronautics Limited (HAL), Bharat Forge, Dynamatic Technologies, and Mahindra Aerospace. They cater to major OEMs like Boeing, Airbus, and Lockheed Martin.

With India’s focus on self-reliance (Atmanirbhar Bharat) and Make in India, the aerospace supply chain is expanding rapidly. These suppliers leverage advanced manufacturing, composites, and additive manufacturing to enhance efficiency and innovation, positioning India as a key global aerospace hub.

Figure 31: Airbus Parts Suppliers from India, FY2024 249Source: Frost & Sullivan Analysis | Note: List not exhaustive Challenges in the Indian Aerospace Manufacturing Supply chain

The Indian aerospace manufacturing supply chain faces several challenges:

1. Dependence on Imports: India relies heavily on imports for high-tech raw materials and advanced components like advanced composites, titanium, and avionics systems, leading to potential supply disruptions and increased costs. The strategic partnership would facilitate easier access to technology and international market which would result in higher margins compared to end users in India.

2. Fragmented Supply Chain: The presence of numerous Small and Medium-sized Enterprises (SMEs) with limited resources hinders their ability to integrate into larger global supply chains effectively, causing inefficiencies, delays, and higher costs. Aequs aim to leverage the existing ecosystems and their manufacturing capabilities to expand their market share in related precision-driven sectors among others, which are expected to be growing sectors in India, particularly considering the Government of India’s push towards local manufacturing in India.

3. Infrastructure Constraints: India’s aerospace manufacturing sector faces significant infrastructure constraints that limit its global competitiveness. These include a shortage of dedicated aerospace industrial zones, inadequate testing and certification facilities, and insufficient high-precision manufacturing capabilities. Many areas also suffer from unreliable utilities, weak last-mile connectivity, and fragmented supply chains, which increase production costs and lead times. Additionally, a lack of integrated logistics and proximity to airports or seaports often delays critical imports and exports.

Aerospace clusters address these challenges by centralizing resources, fostering collaboration, and leveraging shared facilities. Clusters in regions like Bangalore, Hyderabad, and Tamil Nadu offer specialized industrial parks, dedicated aerospace SEZs, and advanced R&D centers. They ensure robust supply chains and access to skilled labor, while proximity to airports, rail, and ports streamlines logistics.

Government support—through tax incentives, plug-and-play infrastructure, and certified testing facilities—lowers entry barriers for manufacturers. Public-private partnerships help develop essential utilities like power, water, and digital infrastructure. Co-locating OEMs with Tier-1 and Tier-2 suppliers within these clusters boosts efficiency, reduces costs, and accelerates the growth of India’s aerospace sector Market Size- Indian Aerospace Manufacturing The Indian Aerospace manufacturing market is expected to reach INR 257.09 Bn (USD 3.06 Bn) in CY2030. The market is estimated at around INR 130.51 Bn (USD 1.55 Bn) in CY2024 and grow at a CAGR of 11.96% between the period CY2024 to CY2030.

Figure 32: Indian Aerospace Manufacturing Market Size (In INR Bn), CY2024-CY2030F

257.09 CAGR 11.96% 233.20

209.75

186.76 n o 164.21 illiB

130.51

142.12 R N I n I CY2024 CY2025E CY2026F CY2027F CY2028F CY2029F CY2030F

Source: Frost & Sullivan Analysis | Note: The above market is for commercial aircrafts, Note : Currency exchange rate taken as of 31st March for the respective year, 1 USD = 85.00 INR from 2025 Onwards 250The Indian aircraft components market had witnessed a strong growth between CY2024 and CY2030. In CY2024, the engine segment was valued at INR 2.70 Bn (USD 0.03 Bn), while aerostructures stood at INR 53.95 Bn (USD

0.64 Bn). Interiors were recorded at INR 6.74 Bn (USD 0.08 Bn), landing systems at INR 20.23 Bn (USD 0.24 Bn), doors at INR 5.40 Bn (USD 0.06 Bn), turnings at INR 10.79 Bn (USD 0.13 Bn), and actuation systems at INR 10.79 Bn (USD 0.13 Bn).

By CY2030, significant growth is anticipated across all segments. The engine market is projected to reach INR

12.45 Bn (USD 0.15 Bn), aerostructures at INR 104.58 Bn (USD 1.24 Bn), and interiors at INR 9.96 Bn (USD

0.12 Bn). Landing systems are expected to grow to INR 39.84 Bn (USD 0.47 Bn), doors to INR 7.47 Bn (USD

0.09 Bn), turnings to INR 21.17 Bn (USD 0.25 Bn), and actuation systems to INR 22.41 Bn (USD 0.27 Bn).

The CAGR from CY2024 to CY2030 highlights notable expansion. Engines are set to grow at 29.03%, followed by actuation systems at 12.95%, aerostructures at 11.66%, and landing systems at 11.96%. Increasing aircraft production, technological advancements, and rising demand for lightweight and fuel-efficient components are driving this growth. Investments in next-generation materials and automation will further boost the sector.

Figure 4.7: Indian Aircraft Sub System Market In INR Bn), CY2024-CY2030F

257.09

233.20

209.75

186.76 n o 164.21 illiB

142.12 R 130.51 N I n I CY2024 CY2025E CY2026F CY2027F CY2028F CY2029F CY2030F Aerostructures 53.95 58.58 67.51 76.57 85.77 95.10 104.58 Landing Sytems 20.23 22.03 25.45 28.95 32.51 36.14 39.84 Others 19.91 21.68 25.05 28.49 31.99 35.57 39.21 Actuation Systems 10.79 11.86 13.83 15.87 17.98 20.16 22.41 Turnings 10.79 11.74 13.56 15.41 17.29 19.21 21.17 Interiors 6.74 7.02 7.75 8.40 8.99 9.51 9.96 Doors 5.40 5.57 6.09 6.54 6.92 7.23 7.47 Engine 2.70 3.63 4.98 6.54 8.30 10.27 12.45

Source: Frost & Sullivan Analysis | Note: The above market is for commercial aircrafts | Note: Others include components likes engine systems components, cables and wireharnesses, communication system components, to name a few, Note : Currency exchange rate taken as of 31st March for the respective year, 1 USD = 83.00 INR India as an emerging destination India is rapidly emerging as a key destination for aerospace manufacturing, driven by several strategic factors that position the country as an attractive hub for global aerospace companies and local manufacturers.

India offers a cost advantage, with competitive labor costs and lower overheads compared to other established aerospace manufacturing hubs like the US and Europe. This cost efficiency makes India an attractive destination for the Global Aerospace companies.

Additionally, India has made significant strides in developing a skilled workforce in aerospace engineering and manufacturing. The government's emphasis on education, training programs, and partnerships with aerospace companies ensures a steady supply of qualified professionals to meet the sector's growing needs.

251Furthermore, India’s growing air travel market and the expansion of regional airlines create a rising demand for aircraft, which encourages more local production and supply of aerospace components. Overall, India’s combination of government incentives, cost efficiency, skilled labor, and strategic partnerships makes it a rapidly emerging destination for commercial aerospace manufacturing.

Consumer Section The consumer section focuses on products and services tailored to meet customer needs across various industries.

It includes categories such as electronics, apparel, home appliances, cookware, personal care, and entertainment.

In this report, consumer section refers to consumer electronics, cookware, and toy market.

Global Consumer Electronics Market and Market Dynamics The growth in global consumer electronics market which includes products such as laptops, tablets, and wearables devices, is driven by technological advancements and shifting consumer trends. Some of the key trends driving this growth include rapid urbanization and rising disposable incomes, shifts in lifestyle, education and work preferences, demand for connectivity and latest technology (rapid innovation in AI and 5G connectivity), and sustainable products. The sum of all three markets (PC & Laptop), Tablets and Wearables is projected to grow from USD 351.64 Bn in 2024 to USD 405.46 Bn in 2030 registering a CAGR of 2.89%.

Figure 33: Market Segmentation on Consumer Electronics Market

Source: Frost & Sullivan Analysis Aequs aims to increase their proportion of consumer electronics products, which are higher-margin products as compared to other consumer products such as toys. Aequs’ product portfolio for consumer electronics includes components for portable computers and smart devices.

Global Laptop Enclosures Outsourced Market The global laptop enclosures market is experiencing strong growth, driven by the increasing demand for lightweight, durable, and visually appealing designs made from materials such as aluminium, carbon fibre, and high-grade plastics, designed to protect internal components from damage, dust, and moisture. These enclosures enhance portability and longevity while offering customizable, sleek designs. The market is projected to expand from USD 17.73 Bn in 2024 to USD 18.87 Bn by 2030, reflecting a CAGR of 1.04%. The laptop enclosures account to around 15.00% of the overall market by value. Most laptop enclosures for global brands (HP, Dell, Lenovo, Apple, Asus, etc.) are manufactured by large Taiwanese ODMs (Original Design Manufacturers) such as Foxconn, Compal, Quanta, Wistron, and Inventec, who have extensive manufacturing operations in China and Southeast Asia. Companies like Lian Li, Cooler Master and Sohoo Technology are recognized for their expertise in high-quality, often aluminium, chassis and enclosures, supplying both consumer and enterprise markets.

252Figure 34: Global Laptop Enclosure Outsourced Market (In USD Bn), 2023-2030F

18.87 CAGR 1.04% 18.68

18.48

18.29

18.10 n o 17.92 illiB D

17.55

17.73 S U n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis | Note: The above market is enclosures for laptops only Global Laptop Market This segment includes both personal computers (PC) and laptops. The rise of remote work, online education, and digital content consumption further supports market growth. The global laptop market is expected to increase from USD 159.35 Bn in 2024 to USD 169.60 Bn by 2030, registering a CAGR of 1.04%. The key players in the global laptop market are Lenovo, Dell, HP, Apple, and Asus to name a few.

Figure 35: Global Laptop Market (In USD Bn), 2023-2030F

169.60 CAGR 1.04% 167.85

166.11

164.40 n o 162.70 illiB

161.02 D 159.35 S U 157.71 n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis Global Wearables Outsourced Market The global wearables market includes wrist bands, smartwatch, ear wear, smart rings, and smart glasses Technological advancements in sensors, connectivity, and battery life improve product performance. The global wearables outsourced market is a significant and growing segment, underpinned by the expansion of the broader wearables industry and the increasing reliance on contract manufacturers for efficient, scalable, and cost-effective production. Asia remains the dominant region for outsourced manufacturing, with countries like China, India, and Taiwan at the forefront. The growing demand for wearables and personal devices, coupled with OEMs’ China+1 strategy, also positions India as an alternative supply base. The global wearables market is expected to grow from USD 126.58 Bn in 2024 to USD 151.40 Bn by 2030. The global outsourced wearables market is projected to increase from USD 43.55 Bn in 2024 to USD 52.09 Bn by 2030, registering a CAGR of 3.03%. The outsourced segment is estimated to account for around 50% of the total market.

253Figure 36: Global Wearables Outsourced Market (In USD Bn), 2023-2030F CAGR 3.03%

52.09

48.23 49.30 50.06

46.76

45.06

43.55

40.85 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis Global Tablets Outsourced Market The global tablets outsourced market is experiencing steady growth, driven by the increasing demand for portable, versatile devices for work, entertainment, and education. Outsourcing covers the entire tablet value chain, from product design and component sourcing to final assembly and logistics. This allows brands to focus on innovation and marketing while leveraging the scale and efficiency of specialized manufacturers. Companies like Foxconn, Pegatron, Compal, and Wistron are leading contract manufacturers for global tablet brands (Apple, Samsung, Huawei, Amazon, Lenovo etc.). Technological advancements in display quality, processing power, and battery life are enhancing user experience. The global market size of Tablet is expected to grow from USD 65.71 Bn in 2024 to USD 84.46 Bn in 2030. The global outsourced tablet market is projected to expand from USD 24.28 Bn in 2024 to USD 31.20 Bn by 2030, at a CAGR of 4.27%. The outsourced segment is expected to account for around 55% of the overall tablet manufacturing market.

Figure 37: Global Tablet Outsourced Market (In USD Bn), 2023-2030F CAGR 4.27 % 31.20

28.15

25.39

24.28

22.91 n 20.67 o illiB

16.75

18.64 D S U n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis Global Toy Market The global toy market is experiencing several key shifts. A significant trend is the increasing demand for sustainable and ethically produced items, reflecting growing consumer awareness of environmental and social responsibility. Another key dynamic is the focus on inclusivity and representation, with manufacturers striving to create products that reflect the diversity of the global population. The market is also influenced by trends such as 254the growing importance of customization, seasonal trends, and cultural shifts further impact market performance, with certain periods seeing spikes in demand.

Key Market Drivers in Global Toy Market The global toy market is influenced by several dynamic factors, including shifting consumer preferences, technological advancements, and evolving retail landscapes. One of the key drivers is the increasing demand for interactive and educational toys that engage children’s learning and development. Additionally, the rise of technology has led to the proliferation of digital toys, smart devices, and augmented reality (AR) toys, which integrate gaming and physical play experiences. The key drivers in the Global toys market are:

Growing Demand for Educational and STEM Toys: Parents increasingly prioritize toys that encourage learning and skill development. STEM toys promote critical thinking, creativity, and problem-solving, making them a preferred choice. For example, LEGO Education kits and Osmo’s interactive learning games.

Rising Disposable Income: Higher income levels, especially in emerging economies, enable families to spend more on premium and branded toys. This trend drives demand for high-quality, innovative, and diverse toys. For example, premium figures and Toy car from brands like Mattel.

Popularity of Licensed and Franchise-Based Toys: Toys based on popular movies, TV shows, and video games are in high demand among children and collectors. Franchises play a significant role in shaping purchasing decisions. For example, Marvel action figures, Frozen dolls, and Pokémon trading cards.

Technological Advancements and Smart Toys: Integration of technology, such as AI, AR, and VR, has created a new category of interactive and engaging toys that attract tech-savvy children and parents. For example, Pictionary Air with AR functionality.

Shift Toward Eco-Friendly and Sustainable Toys: With growing environmental concerns, parents are increasingly opting for toys made from sustainable materials, such as wood, recycled plastic, and biodegradable components. For example, Green Toys (Company based in California, US), which produce toy components from 100% recycled materials.

Expansion of E-Commerce Platforms: The convenience of online shopping and the availability of a wide range of toys with competitive pricing have boosted sales globally. E-commerce platforms also allow access to niche and international brands. For example, Amazon dominate toy sales market in the US with estimated sale in this category to reach USD 24.80 Bn, this accounts for around 60.00% to 65.00% of the US toys market.

Increased Focus on Indoor and Family-Oriented Toys: The pandemic-induced focus on at-home entertainment has spurred demand for puzzles, board games, and building kits, fostering family interaction and creativity. For example, Monopoly, Jenga, and Ravensburger puzzles experienced a surge in sales during lockdowns.

Cultural and Seasonal Influence: Cultural events, festivals, and holidays consistently drive toy demand.

Regional preferences also shape toy trends, such as traditional toys during specific festivals or new launches during global holidays like Christmas. The surge in demand for plush toys during Valentine's Day and themed toys like Elf on the Shelf during Christmas.

Market Challenges The global toy market faces several challenges, including rising raw material costs, which can affect production budgets and retail prices. Strict safety and regulatory standards across different markets require compliance, adding complexity to manufacturing and distribution for example, the CE mark is a mandatory certification for toys sold within the European Union (EU). The key challenges are discussed below:

• Stringent Regulatory Frameworks: The EU Toy Safety Directive requires toys sold in Europe to meet specific safety standards, including restrictions on harmful chemicals and mandatory CE marking. In the USA, the Consumer Product Safety Improvement Act (CPSIA) sets limits on lead and phthalates in toys.

Compliance with these regulations requires costly testing and certification processes.

255• Environmental Constraints: Environmental sustainability has become a key concern in the toy industry, with pressure mounting for manufacturers to reduce waste and environmental impact. For example, Hasbro, known for toys like Monopoly and Play-Doh, is also exploring the use of plant-based plastics.

They have launched toys made with bioplastics in some product lines, aiming to reduce the environmental impact of their manufacturing processes. Their commitment to sustainable packaging also includes efforts to use recycled or plant-based materials • Digital Distraction: As digital entertainment increasingly captures children's attention, traditional toy manufacturers face the challenge of staying relevant. Video games, apps, and streaming services like Netflix or YouTube offer an abundance of entertainment that often competes with physical toys. The toy manufacturers have realized that collaborating with digital platforms would help them compared to competing with them to gain the market. For example, toys like Barbie or Hot Wheels now incorporate digital elements, such as interactive apps or online features, to keep up with the trend. However, many traditional toy companies face declining sales as digital content consumes more of children’s leisure time.

• Rising Production Cost: The increasing cost of plastic in toy manufacturing is directly tied to the volatility of oil prices. As crude oil prices approach USD 100.00 per barrel, the cost of producing petroleum-based plastics rises significantly, potentially reaching USD 6.00 to USD 7.00 per kilogram. It is estimated that 1.90 kilogram of crude oil is required to produce 1.00 kilogram of plastic.i Since crude oil is a key raw material in plastic production, higher oil prices lead to increased manufacturing costs, which in turn affect toy pricing.

• Cultural Sensitivity: The Indian Monopoly set, launched by Hasbro, is a localized version of the classic board game tailored to reflect Indian culture, landmarks, and traditions. In this version, iconic properties, and locations from across India replace the traditional street names seen in the global version. For example, famous Indian locations like the Taj Mahal, Gateway of India, and Qutub Minar are used as properties, while Chennai and Delhi replace New York and other western cities. The game also incorporates Indian elements like currency (rupees), traditional foods, and vehicles such as the auto rickshaw. The aim was to make the game more relatable to Indian players, infusing it with the local flavour while maintaining the classic gameplay.

Market Restraints

The key market restraints in the global toy industry are the following: • High Labor cost in Toy Manufacturing: High labour costs in regions like Europe and the USA, present a significant challenge for toy manufacturers. For instance, companies producing handcrafted toys or intricate collectibles face rising wages, increasing their operational expenses. LEGO, based in Denmark, has invested heavily in automation to counter high labour costs while maintaining quality. Many manufacturers outsource production to lower-cost regions, such as China or Vietnam, to reduce expenses. However, this strategy can introduce risks such as supply chain disruptions and quality control issues • Counterfeit Products: The proliferation of counterfeit toys undermines legitimate businesses and endangers consumers. For example, counterfeit Barbie dolls, often sold on online platforms, use substandard materials, and may contain harmful chemicals. These products violate intellectual property laws and erode consumer trust in well-known brands. In response, stricter enforcement of IP laws and partnerships with e-commerce platforms, such as Amazon’s "Project Zero," help tackle this issue, protecting both consumers and legitimate manufacturer.

Business Model in the Toy Industry

There are three business models in the global toy industry which are explained in the figure and table below:

256Figure 38: Manufacturing Business Model in the Global Toy Industry

Source: Frost & Sullivan Analysis Global toy manufacturers predominantly prefer contract manufacturing or outsource manufacturing due to factors like Control Over Production, Flexibility, Cost Structure, Risk and Quality Control, Production Speed, Scalability, Labour and Workforce, Supply Chain Management, Capital Investment, and Innovation & Design.

Market Dynamics of the Toy Industry in terms of Contract Manufacturing Contract manufacturing plays a significant role in the toy industry, influencing market dynamics in various ways.

By outsourcing production to third-party manufacturers, toy companies can focus on product design, branding, and innovation while reducing costs related to manufacturing infrastructure and labour. • Cost Efficiency: Contract manufacturing allows toy companies to reduce operational costs, especially in regions where labour and production costs are lower. This enables them to offer competitive pricing and increase profit margins.

• Scalability and Flexibility: Toy companies can scale production up or down based on seasonal demand or market trends without committing to large capital expenditures. Contract manufacturers offer flexibility in production volumes, making it easier for companies to manage inventory and respond to market fluctuations.

• Global Reach: Partnering with contract manufacturers in different regions facilitates access to international markets. This is especially crucial for toy companies seeking to expand their global presence while maintaining localized production capabilities.

• Quality Control and Compliance: Contract manufacturers often need to adhere to international safety standards and regulations, which has led to an increased focus on quality control processes. However, ensuring that contracted factories meet these standards remains a key responsibility for toy brands.

• Innovation and Expertise: Contract manufacturers often bring specialized expertise, especially in mass production, materials, and technology integration. This allows toy companies to leverage advanced manufacturing techniques, such as robotics or automated processes, without investing heavily in these capabilities themselves.

Labour-Intensive Touch Points in Toy Industry The toy industry is traditionally a labour-intensive sector, especially in the production of mass-market toys.

Several aspects of toy manufacturing contribute to its high labour intensity:

257Figure 39: Labour-Intensive Touch Points in Toy Industry

Source: Frost & Sullivan Analysis • Assembly and Craftsmanship: Many toys require detailed, manual assembly, especially those involving intricate parts, packaging, or quality control. While automation is increasingly used in large-scale manufacturing, certain types of toys, particularly those with fine details or custom features, still require significant human labour.

• Low-Cost Manufacturing: In regions with low labour costs, toy manufacturers often rely on a large workforce to keep production costs low. This is particularly common in countries like China, India, and other parts of Asia, where a significant portion of global toy manufacturing is based.

• Customization and Small Batch Production: While mass production is common, the toy industry also produces limited-edition or customizable toys, which often require manual intervention for personalized features or smaller production runs.

• Quality Control: Ensuring that toys meet safety standards often involves extensive manual checks, inspections, and testing to verify compliance with global regulations. These processes are labour- intensive but crucial in maintaining quality and ensuring safety.

• Packaging and Distribution: Packing toys for shipment and ensuring proper labelling and distribution also require significant manual labour, especially for large shipments or when toys are customized or assembled for specific markets.

Global Toy Outsourced Market The global outsourced toy market (includes figurines, vehicles, and outdoor toys) is estimated at USD 7.05 Bn in 2024 and is projected to grow USD 9.68 Bn by 2030. The cumulative market during the period 2024-2030 is expected to reach USD 58.34 Bn. The key players in the global toy market are LEGO Group, Mattel, Inc, Hasbro, Inc., Bandai Namco Holdings and Spin Master Corp., to name a few. The global toys market is expected to expand from USD 110.83 Bn in 2024 to USD 152.13 Bn by 2030 growing at a CAGR of 5.42%. The global toy outsourced market is estimated to be 70% of the total global toy manufacturing market. The figurines, vehicle and outdoor toys market is estimated to be around 20%-25% of the overall Global toys market.

258Figure 40: Global Toy Outsourced Market (In USD Bn), 2023-2030F CAGR 5.42 %

9.68

9.20

8.75

8.31

7.88 n 7.47 o 7.05 illiB 6.74 D S U n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis | Note: The above market includes figurines, vehilces and outdoor toys Global Consumer Durables Market The global consumer durables market includes products such as home appliances, electronics, cookware, furniture, and automobiles to name a few. However, in this report this segment covers only cookware market, which includes non-stick cookware market. The rise in online shopping and e-commerce platforms has further increased accessibility to consumer durables globally. Additionally, sustainability concerns are pushing manufacturers to innovate eco-friendly products. As consumers seek convenience, durability, and modern features, the global consumer durables market continues to evolve, offering opportunities for both established and emerging brands.

Market Dynamics in the Global Cookware Market The global cookware market is a dynamic sector influenced by evolving consumer preferences, technological advancements, and economic factors. Health consciousness drives demand for specialized cookware like air fryers and non-stick options.

• Sustainability and Eco-Friendly Cookware: Growing consumer demand for environmentally responsible products is driving the development of cookware made from sustainable materials like recycled aluminium, bamboo and free from toxic chemicals like PFOA and PFAS.

• Technological Innovations: The rise of smart cookware with IoT features, such as temperature sensors and app connectivity, and the increased popularity of induction-compatible cookware are transforming the market.

• Rise of Premium and Designer Cookware: Consumers are gravitating toward premium, durable, and aesthetically pleasing cookware. Collaborations with celebrity chefs and influencers further elevate the appeal of these products.

• Health-Focused Cooking Solutions: Health-conscious consumers are driving demand for non-stick cookware, air fryer-compatible options, and tools designed for oil-free and low-fat cooking. • Growth of E-Commerce: Online retail is reshaping the market, with brands adopting direct-to-consumer models and offering customizable cookware sets tailored to individual preferences.

259Market Size-Global Outsourced Cookware Market 2023-2030F The global cookware outsourcing market is closely linked to the broader cookware manufacturing sector, which is experiencing steady growth driven by rising consumer demand, technological innovation, and the expansion of manufacturing capabilities in Asia. The key countries within Asia which are preferred for outsourcing of cook ware are China, India, and Vietnam. The global cookware market is projected to grow from USD 29.52 Bn in 2024 to USD 42.37 Bn by 2030. The global outsourced cookware market is expected to expand from USD 8.05 Bn in 2024 to USD 11.55 Bn by 2030, registering a CAGR of 6.21%. The global cookware outsourced market is estimated to be 50% of the total global cookware manufacturing market.

Figure 41: Global Outsourced Cookware Market (In USD Bn), 2023-2030F CAGR 6.21 %

11.55

10.97

10.38

9.80

9.22 n 8.63 o illiB 7.55 8.05 D S U n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis Global Non-Stick Outsourced Cookware Market (Consumer Durables) The Global Non- stick market is estimated at 25.00% of the global cookware market. The global non-stick cookware market is experiencing steady growth, driven by increasing consumer preference for convenience, health-conscious cooking, and ease of cleaning. Non-stick cookware, often made with Teflon or ceramic coatings, offers advantages such as reduced oil usage and effortless food release. Rising awareness about healthy cooking, along with innovations in non-toxic, eco-friendly coatings, is boosting market demand. Additionally, the expansion of the food service industry and growing interest in home cooking contribute to the market's growth.

The global non-stick cookware market is expected to grow from USD 7.38 Bn in 2024 to USD 10.59 Bn by 2030F.

The global non-stick outsourced cookware market is estimated to grow from USD 2.01 Bn in 2024 to USD 2.89 Bn by 2030, with a CAGR of 6.21%. The key players in the global non-stick cookware market are Tefal, Cuisinart, Tramontina, Calphalon and Scanpan to name a few. The global non- cookware outsourced market is estimated to be 50% of the total global non- cookware manufacturing market.

Figure 42: Global Non-Stick Cookware Market (In USD Bn), 2023-2030F CAGR 6.21 % 2.89

2.74

2.60

2.45

2.30 n 2.16 o 2.01 illiB 1.88 D S U n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis 260Indian Consumer Electronics Market and Market Dynamics The Indian consumer electronics market is experiencing robust growth, driven by rising disposable incomes, evolving consumer preferences, and rapid technological advancements. Increased adoption of smartphones, smart home devices, and wearables, coupled with expanding e-commerce platforms, is reshaping the market, offering significant opportunities for both domestic and international brands. The consumer electronics products that Aequs manufactures (portable computers and smart devices) have high barriers to entry.

The consumer electronics market in India is evolving rapidly, shaped by significant trends and initiatives. • Make in India The Make in India initiative has strengthened local consumer electronics manufacturing, reducing reliance on imports and fostering a self-sufficient industry. Global companies like Samsung and Xiaomi have established large production plants in India, creating products both for domestic consumption and exports.

• PLI Schemes The Production-Linked Incentive (PLI) schemes provide financial rewards to electronics manufacturers, promoting local production of smartphones, laptops, and semiconductors. Companies such as Foxconn, Dixon and Kaynes have leveraged these incentives, boosting India's electronics manufacturing footprint.

• Ease of Laptop and Tablet Import in 2025 India's anticipated easing of import restrictions for laptops and tablets in 2025 aims to streamline supply chains and meet rising demand due to e-learning and remote work. The move balances consumer needs with efforts to support local manufacturing.

• Rising Disposable Income As India's middle class grows and disposable income rises, consumers increasingly adopt premium electronics.

High-end smartphones are witnessing a surge in demand driven by tech-savvy buyers. • Increase in E-Learning Platforms in India The growth of e-learning platforms has boosted demand for affordable electronics, including tablets, laptops, and accessories. These devices are essential for students and professionals as education continues its digital transformation across India.

• Custom Tariffs Higher import duties on electronic products incentivize global companies to establish manufacturing facilities in India, ensuring competitive pricing and boosting the local production ecosystem.

• BIS Norms Bureau of Indian Standards (BIS) regulations enforce strict quality and safety standards for electronic products, enhancing consumer confidence and supporting the development of reliable, high-quality local goods.

261Indian Electronics Exports India’s electronics exports increase from INR 619.08 Bn (USD 8.22 Bn) in FY2020 to INR 3,307.85 Bn (USD

38.58 Bn) in FY2025, registering a CAGR of 39.82%. Increase in the exports can be primarily attributable to government schemes like PLI and indigenous capability development by player such as Aequs, Dixon and Kaynes, etc. Aequs aims to further diversify their business by expanding their portfolio of consumer electronics products.

Aequs has started manufacturing and have commenced mass production shipments of components for portable computers from July 31, 2025 and intends to manufacture and commence mass production shipments of components for smart devices, targeting integration into the supply chain of a company that is among the largest global consumer electronics players by revenue in Financial Year 2024.

Figure 43: Indian Electronics Exports (In INR Bn), FY2020-FY2025 3,307.85 CAGR39.82% 2,428.11 n o illiB 1,935.35 R N 1,188.73 I n I 813.29

619.08 FY2020 FY2021 FY2022 FY2023 FY2024 FY2025

Source: PIB | Note : Currency exchange rate taken as of 31st March for the respective year

Laptop:

Taiwanese tech giant Asus is ramping up its investment in India, aiming to establish the country as a major manufacturing and export hub over the long term. As part of this effort, Asus has teamed up with VVDN Technologies to set up a new facility in Manesar focused on assembling enterprise laptops. This initiative builds on the company’s existing manufacturing partnerships with Dixon and Flex, further advancing its "Make in India" vision. In addition to expanding production, Asus has set a bold target: to become the leading enterprise laptop brand in India within the next three years, surpassing American companies such as HP and Dell. Apple is also expanding its supply chain in India to expand their local partnership. Samsung has two factories in India, in Noida and Sriperumbudur to support the “Make in India” policy of the Indian Government. Lenovo has recently doubled its capacity in Puducherry facility with the induction of the third manufacturing line.

Following smartphones, personal computers including laptops have become a significant category in India’s electronic exports, according to data from the commerce ministry. Exports of personal computers have seen robust

growth in five key markets: the United Arab Emirates (UAE), Russia, Bangladesh, the United States, and Sri Lanka. This growth has been driven by government initiatives such as the Production Linked Incentive (PLI) scheme and efforts to improve the ease of doing business in the country. Among the top markets, the UAE emerged as the largest importer of laptops, palmtops, and handheld devices from India.

Tablets:

India is actively working toward self-sufficiency in the IT hardware sector by curbing imports from China, preserving foreign exchange, creating employment opportunities, and strengthening its domestic supply chain.

While some policy measures like the recent licensing requirement for importing laptops, tablets, all-in-one PCs, and servers have faced criticism for being hastily introduced and have since been postponed, the overarching goal of building an Atmanirbhar Bharat (self-reliant India) in IT hardware remains strategically robust and timely.

Under the National Policy on Electronics (NPE), India’s total electronics production reached USD 133.00 Bn in FY2025. Beyond reducing dependence on China, the push toward domestic IT hardware production offers several additional advantages. The initiative could generate up to 5 lakh new jobs, contribute an estimated 1.26% to India’s GDP by 2025, attract over USD 75.00 Bn in cumulative foreign exchange inflows, and draw investments exceeding USD 1.00 Bn potentially resulting in a manufacturing output valued at USD 100.00 Bn. Global 262companies like Lenovo have set up their manufacturing units in Tirupati with its global partner, Wingtech for manufacturing Tablets.

Wearables:

India’s domestically manufactured electronic wearables could capture at least 8.00–10.00% of the global market share through exports by 2026. At present, India accounts for around 4.00–5.00% of the global market value for electronic wearables, with a significant portion still imported from China. As part of its broader vision to achieve USD 300.00 billion in electronics manufacturing by 2026, the Indian government expects the wearables segment to contribute USD 8.00 Bn Of this, exports are projected to generate USD 3.00 Bn.

India's rising wearables production is impacting Chinese manufacturing units, as top brands shift operations.

Leading wearables companies like Boat and Gizmore are now producing most of their products—especially in the audio and smartwatch segments—through local electronics contract manufacturers such as Dixon Technologies and Optiemus Electronics. Boat revealed that about 75.00% of the company's audio devices and nearly 95.00% of its smartwatches are now made in India. As a result, the production capacity at the Chinese factories previously used by the company has reduced.

Indian Toy Market and Market Dynamics The Indian toy market is evolving with increasing demand for innovation and variety. The industry sees a growing focus on educational toys that combine learning with play, promoting cognitive and motor skills development.

The rise of e-commerce platforms has transformed the shopping experience, offering a wide range of toys from global and local brands, enhancing accessibility. Licensing agreements with popular entertainment franchises continue to shape toy offerings, influencing trends in character-based merchandise. Seasonal demands, cultural influences, and evolving tastes also play a role in shaping market trends.

Market Drivers The Indian toy market is experiencing growth driven by several factors. The country's large and young population provides a substantial consumer base, while rising disposable incomes allow families to spend more on toys and leisure. The Indian toy market has witnessed remarkable growth in recent years due to the convergence of various socioeconomic and technological factors.

• Rise in Disposable Income: The steady rise in disposable income among Indian households has empowered families to spend more on children’s entertainment and developmental needs. With better financial stability, parents are prioritizing high-quality and educational toys that enhance cognitive and motor skills, moving beyond traditional toys to branded and innovative options.

• Increasing Urbanization: Urbanization has transformed the lifestyle and preferences of Indian families.

As more families migrate to cities, exposure to global trends and a fast-paced urban lifestyle have led to increased demand for modern, themed, and tech-savvy toys. Urban parents are also more inclined to purchase toys that align with international safety standards and advanced features.

• Change in Family Structure: The shift from joint families to nuclear family setups has led to increased focus on children within households. With fewer siblings and extended family members, parents and grandparents are more willing to spend on premium toys and games to engage, educate, and entertain children. This trend has significantly boosted per-child spending on toys.

• E-Commerce: The e-commerce boom has revolutionized toy retail in India, providing unparalleled convenience and variety to consumers. Online marketplaces offer extensive product catalogues, competitive pricing, doorstep delivery, and access to international brands, making toys more accessible across all demographics, including Tier 2 and Tier 3 cities.

263• Make in India: The “Make in India” initiative has been a significant driver for the domestic toy industry.

It encourages local manufacturing, reducing dependence on imports and fostering innovation among Indian toymakers. Government incentives, along with a focus on producing eco-friendly and educational toys, have created a favourable environment for indigenous brands. This initiative has also increased the global competitiveness of Indian toy manufacturers, helping them tap into export markets.

Market Challenges The Indian toy market faces challenges such as a heavy dependence on imports, especially from China, which impacts local manufacturers and creates supply chain vulnerabilities. While the Indian toy market is growing rapidly, it faces several significant challenges that impact its overall potential.

• Price Sensitivity: Indian consumers are highly price-sensitive, especially in Tier 2, Tier 3 cities, and rural areas. Many families prioritize affordability over quality or brand, creating a tough competitive environment for premium and branded toys. This price sensitivity often leads to a preference for low- cost, locally made toys or imported alternatives, making it challenging for manufacturers to maintain profit margins while offering competitive pricing.

• Regulatory and Safety Compliance: Ensuring toys meet global safety and quality standards is a persistent challenge for Indian toy manufacturers. The Bureau of Indian Standards (BIS) has mandated stringent safety norms, which often require significant investment in advanced manufacturing processes and materials. For smaller manufacturers, compliance with these regulations can be financially and logistically daunting, potentially limiting their growth or leading to non-compliance issues.

• Counterfeit Products: The prevalence of counterfeit and substandard toys in the Indian market poses a serious challenge for established brands. These low-quality knockoffs, often sold at much cheaper prices, not only erode the market share of authentic brands but also compromise consumer trust. Counterfeit toys can also fail to meet safety standards, endangering children and tarnishing the reputation of the toy market.

• Infrastructure and Logistics Hindrances: India’s diverse geography and underdeveloped infrastructure in certain regions create logistical challenges for toy manufacturers and distributors. Poor road connectivity, high transportation costs, and inefficiencies in the supply chain make it difficult to reach consumers in remote or rural areas. Additionally, delays in the import and export processes due to bureaucratic red tape can disrupt operations for companies’ dependent on global supply chains.

Market Restraints The Indian toy market encounters several constraints that impede its growth. A significant hurdle is the underdeveloped local manufacturing ecosystem, which restricts production capacity and compels companies to depend on imports for various toy components. While the market holds substantial growth potential, these challenges continue to restrict its overall development.

• Lack of Brand Awareness: In India, a significant portion of consumers remains unaware of branded toys and their benefits, especially in semi-urban and rural areas. Parents in these regions often prioritize affordability and functionality over brand recognition, leading to a preference for unbranded, locally made toys. This lack of awareness restricts the penetration of international and premium domestic toy brands, reducing the market's ability to command higher value.

• Urban Area-Centric High Disposable Income: The concentration of high disposable income is predominantly in urban areas, creating an imbalance in demand. Urban families are more exposed to branded and educational toys, while rural and semi-urban regions, where most of the population resides, 264remain largely untapped. This urban-centric demand limits the overall growth potential of the toy market and creates a disparity in consumer access across geographies.

• High Dependency on Imports: India has traditionally relied heavily on imports, particularly from China, to meet domestic toy demand. Imported toys often dominate the market due to their competitive pricing and variety. However, this dependency exposes the industry to risks such as fluctuating exchange rates, trade restrictions, and quality concerns.

Indian Toy Exports India’s toy exports were INR 9.76 Bn (USD 129.60 Mn) in FY2020 and increased to INR 14.53 Bn (USD 169.46 Mn) in FY2025, clocking a CAGR of 8.28%. Indian toy exporters are seizing what they describe as a "golden opportunity" arising from the steep tariffs the US has imposed on Chinese imports. This comes amid rising inquiries from American buyers looking for alternative sources to reduce their dependency on Chinese goods. The Toy Association of India has identified approximately 40 firms capable of meeting the necessary compliance standards to export to the US market. Currently, around 20 Indian companies are exporting toys in bulk to the American market, according to Toy Association of India.

Figure 44: Indian Toy Exports (In INR Bn), FY2020-FY2025 CAGR8.28%

14.53 n o 13.44 12.65 12.70 illiB

9.76 10.34 R N I n I FY2020 FY2021 FY2022 FY2023 FY2024 FY2025

Source: Ministry of Commerce and Industry | Note: Currency exchange rate taken as of 31st March for the respective year Indian Cookware Exports The Indian Cookware was at INR 41.41 Bn (USD 549.76 Mn) in FY2020, and it reached to INR 46.81 Bn (USD

546.00 Mn) in FY2025 with a CAGR of 2.48%. A few Indian companies are exporting the cookware and Non- Stick cook ware, as an example, Stovecraft increased exports from 3% to 12%, and it is believed that in the next eight to ten quarters, this could rise to around 20%. Stovecraft are exporting under Pigeon brand and exploring various opportunities with retailers in North America. They collaborate with retailers there, and currently, they are exporting non-stick cookware. They are now expanding their export categories, which will significantly boost the exports.

Figure 45: Indian Cookware Exports (In INR Bn), FY2020-FY2025 CAGR2.48%

51.11

46.71 46.81

44.52 n o 41.41 38.28 illiB R N I n I FY2020 FY2021 FY2022 FY2023 FY2024 FY2025

Source: Ministry of Commerce and Industry | Note: Currency exchange rate taken as of 31st March for the respective year 265Global & Indian Precision Manufacturing Market Global Precision Manufacturing Outlook - Size, Growth and Forecast The global precision manufacturing involves the production of highly detailed and accurate components using advanced machining, additive manufacturing, and robotics and these components are called Precision Engineered Components (PEC). Critical sectors including Medical Devices, Semiconductors, Energy & Power, and Aerospace and Defence, are fundamentally reliant on precision-engineered components as a foundational requirement for their operational performance.

Figure 46: Global Precision Manufacturing Segments

Source: Frost & Sullivan Analysis Key trend in PEC Energy & Power: The energy sector often requires bespoke solutions tailored to specific operating environments, materials, and performance criteria. Precision engineering enables the design and manufacture of these custom parts.

Medical Devices: The medical devices market, especially equipment like MRI and robotic surgery equipment, requires ultra-reliable, miniaturized precision components that meet strict regulatory standards.

Semiconductors: The proliferation of electronic devices is fuelling demand for microcontrollers, sensors, and flexible PCBs, all of which require high-precision manufacturing.

Defense and Aerospace: The defense sector is investing heavily in high-reliability, bespoke precision components, often produced in small batches to meet stringent performance and security requirements.

The global PEC market accounted to USD 852.90 Bn in 2024 and is projected to reach USD 1,286.58 Bn by 2030 with a CAGR of 7.09%.

Figure 47: Global PEC Market (In USD Bn), 2023-2030F CAGR7.09% 1,261.75 1,286.58 1,157.08 1,190.28 1,032.44 1,070.99 n o 852.90 illiB 757.69 D S U n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis / Note: The above market is for PEC includes Energy & Power (Generation), Aerospace & Defense, Healtcare (Medical Devices) and Semiconductor manufacturing equipment 266Indian Precision Manufacturing Outlook - Size, Growth and Forecast India's precision manufacturing sector is rapidly expanding, driven by advancements in technology and increasing demand across industries such as automotive, aerospace, and electronics. A combination of factors such as manufacturing-led government initiatives, strong domestic demand, integration into global value chains (China +1) and cost competitiveness and availability of skilled labour favourably position India within the global precision manufacturing landscape Figure 48: Indian PEC Market (In INR Bn), 2023-2030F CAGR8.74% 4,946.96 4,527.33 4,155.67 3,825.13 n 3,530.15 o illiB 2,778.24 2,992.92 3,230.17 R N I n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis / Note: The above market is for PEC includes Energy & Power (Generation), Aerospace & Defense, Healtcare (Medical Devices) and Semiconductor manufacturing equipment | Currency exchange rate taken as of 31st March for the respective year, 1 USD = 85.00 INR from 2025 Onwards The Indian PEC market was estimated at INR 2,992.92 Bn in 2024 and is expected to grow to INR 4,946.96 Bn in 2030 with a CAGR of 8.74%. The cumulative market is expected to surpass INR 27.01 Tn between the period 2024-2030.

Global Medical Devices Precision Engineering Component (PEC) Manufacturing Market 2023-2030F Precision engineering components spearhead medical innovation, transforming healthcare through exceptional accuracy and reliability. These components form the backbone of advanced medical devices, including Advanced Diagnostic and imaging systems such as MRI and Robotic Surgery Systems, diagnostic systems, and implantable devices and wearable biosensors, and are crafted to meet stringent international standards and use advanced material. The global medical devices market accounted to USD 149.55 Bn in 2024 and is projected to grow to USD 222.00 Bn by 2030, with a CAGR of 6.81%.

Figure 49: Global Medical Devices PEC Market (In USD Bn), 2023-2030F CAGR6.81%

222.00

209.00

196.33

184.03 n o 149.55 160.61 172.11 illiB 139.37 D S U n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis / Note: The above market covers Medical devices segment Indian Medical Devices Precision Engineering Component (PEC) Manufacturing Market 2023-2030F India is shifting from being import-dependent (with 60–70% of medical equipment imported and only around 30% manufactured domestically) to a potential global manufacturing hub. Programs such as Make in India, Aatmanirbhar Bharat, and the Production-Linked Incentive (PLI) Scheme for medical devices are driving local 267manufacturing, innovation, and value-added production. Indian medical device exports reached USD 3.8–4 Bn in 2023–24, with the US as the primary market. Exports are expected to grow to USD 15–20 Bn by 2030. Includes surgical instruments, diagnostic equipment, consumables, and imaging devices. Optical, medical, and surgical instruments are among the top export segments. The sector is characterized by innovation, meeting stringent regulatory standards while catering to domestic and global markets. The Indian medical devices PEC Manufacturing market accounted to INR 6.42 Bn in 2024 and is projected to grow to INR 8.33 Bn in 2030, with a CAGR of 4.44%.

Figure 50: Indian Medical Devices PEC Manufacturing Market (In INR Bn), 2023-2030F CAGR4.44%

8.33

7.99

7.66

7.34

7.02

6.72

6.42

6.13 n o illiB R N I n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis / Note: The above market covers Medical devices segment | Currency exchange rate taken as of 31st March for the respective year, 1 USD = 85.00 INR from 2025 Onwards Global Semiconductor PEC Manufacturing Equipment Market 2023-2030F This segment covers PECs used in the equipment to manufacture semiconductor chips. Miniaturization is the backbone of progress in the semiconductor industry, driving advancements in performance, cost, and new applications. As the industry continues to push the boundaries of how small and efficient chips can be, miniaturization will remain a central theme shaping the future of electronics. Semiconductor manufacturing is globally distributed, but Asia-especially Taiwan, Singapore, and South Korea-leads in advanced chip production.

The US, China, Japan, and Europe are also major players, each with unique strengths in the semiconductor value chain. The growth of semiconductor machinery PEC is fuelled by rising demand for electronic systems, alongside breakthroughs in nanotechnology and automation. This sector plays a pivotal role in industries such as telecommunications, automotive, consumer electronics, aerospace & defense, and data processing, driving global innovation and progress. The market size was USD 28.23 Bn in 2024 and is projected to grow to USD 46.78 Bn in 2030 with a CAGR of 8.78%.

Figure 51: Global Semiconductors PEC Market (In USD Bn), 2023-2030F CAGR8.78%

45.83 46.78

43.18

40.09

36.32 n 32.14 o illiB

25.75

28.23 D S U n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis / Note: The above market covers Semiconductor Manufacturing Equipment 268Indian Semiconductor PEC Manufacturing Equipment Market 2023-2030F India's semiconductor precision engineering components market is growing rapidly, fuelled by advancements in electronics, automotive, and aerospace sectors. Major proposals include the Tata Group’s partnership with Taiwan’s Powerchip Semiconductor Manufacturing Corp (PSMC) for a USD 11.00 Bn fab in Gujarat, and Micron’s USD 2.75 billion assembly and test facility. Several Outsourced Semiconductor Assembly and Test

(OSAT) and Assembly, Testing, Marking, and Packaging (ATMP) units are being set up by companies like Tata, Sahasra, and SPEL. Government initiatives like Semicon India Program, PLI Scheme and Design Linked Incentives (DLI) are expected to drive the domestic production. The Indian semiconductor PEC manufacturing market accounted to INR 210.20 Bn in 2024 and is expected to grow to INR 252.24 Bn by 2030 at a CAGR of

3.09%.

Figure 52: Indian Semiconductor PEC Market (In INR Bn), 2023-2030F CAGR3.09%

202.32 210.20 217.21 224.21 231.22 238.23 245.23 252.24 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis / Note: The above market covers Semiconductor Manufacturing Equipment | Currency exchange rate taken as of 31st March for the respective year, 1 USD = 85.00 INR from 2025 Onwards Global Energy & Power PEC Market 2023-2030F The global Energy & Power PEC market focuses on the production of highly accurate components and systems for the energy generation sector. This includes turbines, generators, transformers, nuclear power plant components, and energy storage devices, engineered to ensure efficiency, reliability, and safety in power generation, transmission, and distribution. The global Energy & Power PEC market was valued at USD 542.89 Bn in 2024 and is projected to grow to USD 782.14 Bn by 2030 at a CAGR of 6.27%.

Figure 53: Global Energy & Power PEC Market (In USD Bn), 2023-2030F CAGR6.27%

792.89 782.14

756.44 756.39

694.08 702.24 n o 542.89 illiB

475.75 D S U n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis / Note: Power Generation segment Indian Energy & Power PEC Market 2023-2030F India's energy and power precision engineering components market is growing steadily, driven by increasing renewable energy projects and infrastructure upgrades. With a focus on efficiency and durability, these components support wind, solar, and thermal power systems. Government incentives and private investments are 269enhancing local manufacturing capabilities, boosting India's global competitiveness. The market is expected to grow to INR 4,324.31 Bn by 2030 at a CAGR of 8.58%. The market accounted to INR 2,638.44 Bn in 2024.

Figure 54: Indian Energy & Power PEC Market (In INR Bn), 2023-2030F 4,324.31 CAGR8.58% 3,967.26 3,645.26 3,354.54 n 3,091.74 o 2,853.91 illiB 2,443.00 2,638.44 R N I n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis / Note: The above market covers Power Generation segment | Currency exchange rate taken as of 31st March for the respective year, 1 USD = 85.00 INR from 2025 Onwards Global Aerospace & Defense PEC Market 2024E-2030F The global Aerospace & Defense PEC market is integral to the production of high-performance components for the aerospace and defense industries. This segment covers parts for aircraft, defense systems, and military equipment, including engines, avionics components, propulsion systems, and structural components. It also includes PEC casted components used in missiles. The global aerospace & defense PEC market accounted to USD

132.23 Bn in 2024 and is projected to reach USD 235.66 Bn by 2030 at a CAGR of 10.11% Figure 55: Global Aerospace & Defense PEC Market (In USD Bn), 2023-2030F CAGR10.11% 235.66

214.02

194.37

176.53 n 160.32 o 145.60 illiB

116.81

132.23 D S U n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis Drone Overview of Precision-Engineered Components in the Drone Market The drone market is experiencing rapid growth, with projections estimating the global market will reach USD

58.04 Bn by 2026F, driven by technological advancements and expanding applications across industries such as agriculture, construction, public safety, and environmental monitoring. Central to this growth is the demand for precision-engineered components, which are critical for drone performance, reliability, and safety.

Importance of Precision Components

Precision engineering is essential in drone manufacturing due to the following factors:

2701. Performance and Reliability: High-precision components ensure stable flight, efficient power usage, and responsiveness, which are vital for applications like aerial surveying, delivery, and cinematography.

2. Safety and Compliance: Accurate manufacturing is necessary to meet stringent regulatory standards and to minimize the risk of mechanical failures or flight instability.

3. Customization and Innovation: The ability to produce bespoke components tailored to specific drone designs and applications allows manufacturers to innovate and address unique client requirements in a competitive market.

Key Precision-Engineered Components in Drone Industry:

Figure 56: Key Precision-Engineered Components in Drone Industry Component Role in Drone Precision Requirements Typical Materials Structural backbone; Tight tolerances for fit & Aluminium, carbon fibre Frames balance & integrity weight composites Aerodynamic efficiency & High accuracy for balance Propellers & Rotors Composites, plastics, metals stability & shape Smooth operation & Aluminium, titanium, Motor Mounts & Gears Exact dimensions for fit alignment plastics Robustness & shock Strength and dimensional Titanium, stainless steel, Landing Gear absorption accuracy plastics Smooth rotation, load- Bearings & Shafts Extremely tight tolerances High-grade steel, ceramics bearing Sensor & Battery Customization for fit & Protection & integration Plastics, composites, metals Housings function

Source: Frost & Sullivan Analysis MRO The global aerospace MRO (maintenance, repair, and overhaul) market is experiencing robust growth, driven by expanding commercial and military fleets, increased aircraft utilization, and technological advancements. In 2024, the aerospace and defense MRO market was valued at approximately USD 114.00 Bn and is projected to grow at a CAGR of 2.96% between the period 2024 to 2030 and reach USD 135.81 Bn, fuelled by rising defense budgets, fleet modernization rising fleet age and the growing complexity of aircraft systems. The commercial segment dominates, accounting for over 70% of the market, with narrow-body aircraft representing the largest share due to their prevalence in short- and medium-haul operations.

Indian Aerospace & Defense PEC Market 2024-2030F India's aerospace and defense precision engineering components market is witnessing significant growth, driven by increased defense spending and the expansion of the domestic aerospace sector. Government initiatives like "Make in India" and offset policies are boosting local manufacturing capabilities, fostering innovation, and positioning India as a key global supplier. In 2024, the Indian aerospace and defense market was valued at INR

137.86 Bn and is projected to reach INR 362.08 Bn by 2030 at a CAGR of 17.46%.

271Figure 57: Indian Aerospace & Defense PEC Market (In INR Bn), 2024-2030F

362.08

306.85 CAGR17.46%

264.53 n o 232.04 illiB 207.18 R 152.34 N 137.86 I 126.80 n I 2023 2024 2025E 2026F 2027F 2028F 2029F 2030F

Source: Frost & Sullivan Analysis | Note : Currency exchange rate taken as of 31st March for the respective year, 1 USD = 85.00 INR from 2025 Onwards Market Dynamics The global precision manufacturing market is experiencing several key trends that are shaping its trajectory, driven by technological advancements, changing consumer demands, and global economic shifts. Here are the most

significant market trends:

Figure 58: Global Precision Manufacturing Market Dynamics

Source: Frost & Sullivan Analysis • Adoption of Industry 4.0 and Smart Manufacturing:

The integration of Industry 4.0 technologies such as automation, IoT, big data analytics, increased adoption of robotics and automation, and artificial intelligence is expected to transform the PEC landscape. These technologies enable real-time monitoring, predictive maintenance, and enhanced efficiency, reducing costs and improving product quality across various industries. Manufacturers are optimizing their supply chains through digital tools and predictive analytics to reduce lead times, lower costs, and mitigate risks.

272• Miniaturization of Components:

Miniaturization, particularly in electronics, medical devices, and aerospace & defense sectors, is driving demand for highly precise, small-scale components. These components require advanced manufacturing processes to maintain high performance while reducing size and weight, such as micro-UAVs and precision moulding components.

• Advanced and Light Weight Material:

The push for lightweight, high-performance materials in sectors like aerospace, healthcare, and electronics is leading to innovations in material science. Manufacturers are increasingly using advanced materials such as carbon composites, titanium alloys, and other lightweight yet durable materials to meet stringent performance and efficiency requirements.

• Sustainability and Green Manufacturing:

There is a growing emphasis on sustainable practices with aggressive target, which are closely monitored which is aimed at reducing the carbon footprint. Companies are adopting energy-efficient manufacturing processes, reducing waste, optimizing resource usage, and integrating sustainable materials into production. Eco-friendly manufacturing is becoming a key differentiator for companies aiming to meet regulatory requirements and attract environmentally conscious consumers.

• Rise of Additive Manufacturing:

Additive manufacturing is revolutionizing how complex components are designed and produced. The ability to create intricate, customized parts quickly and cost-effectively is increasingly being applied to both prototyping and full-scale production, reducing lead times and material waste. This also helps in catering to customize requirements in industries like aerospace and defense. This technology is useful in defense forward bases where critical asset could be grounded due to lack of spares, the additive manufacturing technology has been proven successful to manufacture the spare part, thereby help in reducing the idle time of the asset due to non-availability of the component.

• Focus on Quality Control and Compliance:

With the demand for highly accurate and reliable components, stringent quality control processes are essential.

The use of advanced inspection techniques like 3D scanning, vision systems, and in-line sensors helps ensure that products meet the highest quality standards and comply with industry regulations, particularly in sectors like medical devices, aerospace, and automotive.

• Reshoring and Regional Manufacturing Hubs:

The factors like geopolitical risks, supply chain disruptions, and rising labour costs in certain regions, companies are exploring reshoring or nearshoring their manufacturing operations. By bringing production closer to home or to more stable regions, companies can improve supply chain resilience, reduce transportation costs, and respond more quickly to changing market demands.

• Alternate Location Strategy:

The PEC manufacturing reflects a global shift where companies are diversifying production to mitigate risks and reduce dependence on a single country. This approach addresses concerns like rising labour costs, geopolitical tensions, and supply chain vulnerabilities. Manufacturers are expanding to countries such as Vietnam, India, and Mexico, leveraging lower operational costs, government incentives, and proximity to emerging markets. In 273engineering components, this diversification ensures supply chain resilience and taps into regional expertise. By adopting the alternate location strategy, companies aim to balance efficiency and risk, strengthening their global competitiveness and operational stability.

Factors impacting Competitive Landscape The competition landscape in PEC is influenced by several dynamic factors that shape market trends, pricing, technological advancements, and overall industry growth.

Figure 59: Competition Landscape Factors in PEC Manufacturing

Source: Frost & Sullivan Analysis

1. Technological Advancements:

Continuous innovation in manufacturing technologies such as CNC machining, additive manufacturing (3D printing), robotics, and automation significantly impacts competition. Companies with cutting-edge capabilities in these technologies can offer more precise, cost-effective, and faster solutions, gaining a competitive edge.

For Example: Siemens use advanced CNC machining, robotics, and additive manufacturing to produce high- precision components. Siemens’ integration of Industry 4.0 technologies into their manufacturing process enhances their ability to provide highly accurate and efficient components, giving them a competitive edge.

2. Quality and Precision Standards:

The ability to meet stringent quality standards and tolerances is crucial in precision engineering. Companies that can consistently produce high-quality, defect-free components with minimal variation gain a competitive advantage. Meeting industry certifications (such as ISO, AS9100 for aerospace, or medical-grade certifications) is also a key factor in competition.

For Example: Medtronic uses advanced precision engineering techniques to manufacture components for medical devices, ensuring they meet FDA standards for quality and performance. Their ability to meet the high standards required in healthcare products, enables them to dominate in the market segment.

2743. Cost Efficiency and Pricing:

Price competition plays a major role in the PEC market. Firms that can optimize their production processes to reduce costs, while maintaining high-quality outputs, are better positioned to capture larger market share.

For Example: Bosch leverages automation and lean manufacturing to drive down production costs while maintaining high-quality standards. This allows them to offer competitive pricing for high-precision parts used in power tools and automotive systems, helping them compete with low-cost suppliers globally.

4. Customization Capabilities:

The ability to offer tailored solutions for specific customer needs—whether in terms of design, materials, or performance can differentiate a company. Customization in precision engineering components is particularly important for industries like aerospace, automotive, and medical devices, where each application may have unique specifications.

For Example: DMG Mori offers highly customizable machinery for industries like aerospace and energy. The company’s ability to tailor their solutions to specific customer needs, such as custom tooling for aircraft parts, has helped them to capture a larger share of niche markets.

5. Supply Chain Management:

Efficient supply chain management, including sourcing raw materials, logistics, and inventory management, impacts competitiveness. Companies with a strong, reliable supply chain can reduce lead times and ensure timely delivery of products, gaining an edge in industries where time-to-market is critical.

For example: Rolls-Royce implements cutting-edge supply chain strategies, utilizing predictive analytics and digital technologies like Industry 4.0 to streamline sourcing, manufacturing, and distribution processes. Their strong, global network of suppliers ensures timely and high-quality deliveries, allowing them to meet the rigorous demands of the aerospace and defense sectors while maintaining operational efficiency.

6. Globalization and Market Reach:

The ability to expand into global markets or serve multinational clients influences competition. Companies with an international footprint or those that can scale production to meet global demands are more likely to capture larger market segments. One of the key criteria would also be the physical presence closer to the client location, an example of this would be the Indian Aerospace PEC companies having their physical offices in Europe.

For Example: GE Aviation has global manufacturing and R&D facilities, enabling them to supply precision components to the aerospace industry worldwide. Their international presence, with facilities in the USA, Europe, and Asia, allows them to cater to a diverse set of customers, ensuring competitive advantage through broader market reach.

7. Innovation in Materials:

Advances in materials science, such as the development of lightweight alloys, biocompatible materials, or high- strength composites, can enhance the performance of precision components. Companies that invest in research and development to offer advanced material options are better positioned to meet evolving customer demands.

For Example: Aircraft integrators incorporate titanium, carbon fibre composites, and high-performance alloys into aerospace components. By utilizing innovative materials that provide strength, lightness, and durability, the carbon footprint reduced despite increase in overall aircraft performance.

2758. Regulatory Compliance:

Adhering to industry-specific regulations (e.g., FDA regulations for medical devices, FAA standards for aerospace components) is essential for competing in highly regulated sectors. Companies that demonstrate compliance with these standards can differentiate themselves by ensuring reliability, safety, and legal conformity. There is no specific example because all successful company need to be regulatory compliant, failing which the business cannot sustain.

9. Sustainability and Environmental Impact:

Increasing pressure for companies to adopt sustainable practices and reduce their environmental footprint is a growing factor in the competition landscape. Companies that implement eco-friendly manufacturing processes, use sustainable materials, and comply with environmental regulations are becoming more attractive to clients.

For example, Airbus focuses on making its supply chain more sustainable by engaging suppliers who adhere to environmental standards and with higher process capability. This involves sourcing more from suppliers who can do more than one process within the factory premises than physically moving the work in progress components from one location to another, which would result in increased carbon foot print.

High Demand Product Categories Figure 60: High Demand Product Categories

Source: Frost & Sullivan Analysis High Demand Product categories in Medical Devices In medical devices like MRI machines, precision engineering components are critical for ensuring high performance, reliability, and safety. The growth in demand for MRI machines is expected to drive the following PEC components which are used in MRI machines.

276Figure 61: High Demand Product Categories in Medical Devices

Source: Frost & Sullivan Analysis MRI Equipment The global Magnetic Resonance Imaging (MRI) equipment market is projected to experience significant growth, with estimates indicating an increase in the number of MRI units from approximately 100 Mn to 150 Mn by 2030.

Robotic Surgery Systems The number of robotic surgical systems is anticipated to increase dramatically, with estimates suggesting that there could be around 3X robotic surgical units installed globally by 2030. This reflects a significant rise from the current installations, which are estimated at approximately 7,500 units.

MRI equipment is expected to see medium growth due to its continued importance in diagnostic imaging for brain, spine, and tissue assessments. Technological advancements like AI-driven diagnostics and portable systems support demand, but high costs and market saturation in developed regions limit rapid expansion. On the other hand, robotic surgery equipment is set for high growth as hospitals increasingly adopt minimally invasive technologies that offer greater precision and faster recovery times. Improvements in robotic systems, broader applications across surgical procedures, and declining costs are driving adoption. Rising healthcare investments further boost the demand for robotic surgery solutions, fuelling significant market growth.

277High Demand product categories in Energy & Power Generation The high demand product categories in the Energy & Power Generation include:

Figure 62: High Demand Product Categories in Energy & Power

Source: Frost & Sullivan Analysis Nuclear Power Generation Segment The components used for setting up the Nuclear Power plants and the PEC components like Turbines, Generators and Gearbox are expected to drive this segment. The nuclear power reactors are expected to increase in the next 5 years. There are around 440 operational nuclear reactors, and 65 reactors are in various stages of their construction as of June 2025.

Wind Power Energy Generation Segment Wind power has emerged as a leading renewable energy source, contributing significantly to global efforts to reduce carbon emissions and combat climate change. By harnessing the kinetic energy of wind, modern turbines generate clean electricity, providing a sustainable alternative to fossil fuels. Technological advancements have improved turbine efficiency, making wind power more cost-effective and accessible. In 2024, the annual installed wind energy capacity was around 117 GW which is expected to increase to 194 GW with new capacity additions by 2030.

The nuclear power generation segment is expected to witness medium growth due to its ability to provide a stable and large-scale energy supply with low carbon emissions. However, concerns over safety, high construction costs, and lengthy approval processes limit its rapid expansion. In contrast, wind power generation is projected to see high growth as countries prioritize clean energy solutions to combat climate change. Technological advancements, declining costs, and supportive government policies are driving the adoption of wind energy. Offshore wind projects are gaining momentum, further accelerating growth in this segment as the world shifts toward sustainable and renewable energy sources.

High Demand product categories in Semiconductors The set-up cost of one semiconductor unit is around USD 10 Bn to USD 20 Bn, around 10%-15% of the cost is estimated to account for deposition chambers. It is expected that 18 new Semiconductor Fabrication units are expected to start construction in 2025. By 2030, global investments in semiconductor fabrication facilities (fabs) are projected to reach approximately USD 1.00 Tn. This significant investment is primarily concentrated in regions such as Asia and the United States, with increasing funding also directed towards European projects.

278Figure 63: High Demand Product Categories in Semiconductors

Source: Frost & Sullivan Analysis Deposition Chambers Deposition chambers are essential tools in semiconductor fabrication, enabling the precise application of thin material layers onto silicon wafers to create complex microchip structures. These chambers support processes like Chemical Vapor Deposition (CVD), Physical Vapor Deposition (PVD), and Atomic Layer Deposition (ALD), which are used to deposit dielectric, metallic, or semiconducting films. CVD utilizes chemical reactions to form uniform layers, while PVD uses physical methods like sputtering or evaporation for metal coatings. ALD, known for its precision, deposits materials one atomic layer at a time, ensuring high accuracy for advanced chip designs.

Deposition chambers operate in controlled vacuum environments to prevent contamination and maintain layer uniformity. Features like precise temperature regulation and automation for wafer handling ensure efficient and repeatable processes. They are critical for tasks such as creating transistor gates, insulating layers, and metal interconnects, forming the foundation for modern semiconductor devices' performance and reliability.

High Demand product categories in Aerospace & Defense The key growth drivers in this segment include the growth in defense budget and the robust growth in air travel, thereby increasing the need for larger commercial fleet. The high demand product category in the Aerospace &

Defense PEC are shown below:

Figure 64: High Demand Product Categories in Aerospace & Defense 279Source: Frost & Sullivan Analysis Aircraft Component As on 31st July 2025, the global backlog of unfulfilled aircraft orders has reached approximately 15,241 (Airbus & Boeing) planes. It is estimated that at the current delivery rates the fulfilment of these orders would take approximately 14 years. This backlog represents a significant market opportunity for suppliers in the Commercial Aircraft Supply chain.

Missile Components Aluminium components in missiles play a pivotal role in ensuring their performance, reliability, and efficiency.

The lightweight yet strong properties of aluminium make it ideal for the structure, which houses propulsion, guidance, and payload systems. Aluminium alloys are also used in structural supports, fins, and casings, providing the required strength-to-weight ratio for optimal aerodynamic performance. These components are designed to withstand high temperatures, pressures, and forces experienced during flight. Precision engineering and advanced manufacturing techniques ensure that aluminium parts meet the stringent requirements of modern missile systems, enabling enhanced manoeuvrability and effective deployment in defense applications.

UAV Components Unmanned Aerial Vehicles (UAVs) rely on aluminium components for their airframes, propulsion systems, and structural parts. Aluminium’s lightweight and durable properties enable longer flight durations and higher payload capacities. In UAVs, aluminium alloys are used for frames, housing for motors, and protective casings for electronics. The volume of UAVs was around 4.00-5.00 Mn units in 2024 to 7.00-8.00 Mn units by 2030.

All Types of Casings Casings are critical for protecting components in aerospace and defense systems, providing structural integrity, and shielding sensitive equipment from environmental factors. Engine casings are designed to endure high temperatures and pressures, while missile casings ensure durability and aerodynamics during flight. Electronic casings protect delicate systems from electromagnetic interference and physical damage. Hydraulic casings enclose high-pressure fluid systems, ensuring safety and efficiency. These casings are manufactured using materials like aluminium, and advanced composites to balance strength, weight, and thermal resistance.

Urban Mobility eVTOL is an important element of urban mobility industry. The eVTOL market is expected to reach a fleet of 2,000 units in 2030 and then growing 6X to reach a fleet of 6,000 units by 2040. The eVTOL uses aluminium and its alloys for structural components.

280The countries that have a good technical workforce and can execute production orders at a competitive rate would be the target countries for global companies. The low-cost belt countries, like India, Indonesia, Vietnam, Poland, and Thailand, are amongst the top countries of consideration for the PEC manufacturing segment.

Peer Benchmarking Financial Benchmarking Aequs competes with major aerospace and consumer electronics component manufacturing companies, as well as major consumer durables companies, both domestic and foreign Revenue from Operations Figure 65: Revenue from Operations (In INR Mn), FY2023-FY2025 CAGR Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 FY2023- FY2025 Aequs 8,121.32 9,650.74 9,246.06 4,589.73 5,371.59 6.70% Azad 2,516.75 3,407.71 4,573.54 2,099.44 2,827.17 34.81% Engineering Unimech

941.66 2,087.75 2,429.26 1,206.56 1,249.70 60.62% Aerospace Amber 69,270.95 67,292.69 99,730.16 40,860.00 50,960.00 19.99% Kaynes 11,261.14 18,046.19 27,212.52 10,760.94 15,796.84 55.45% Dixon 1,21,920.10 1,76,909.00 3,88,601.00 1,81,138.80 2,76,907.00 78.53% PTC Industries 2,192.62 2,567.89 3,080.74 1,192.33 2,217.72 18.53% Year on Year (YoY) growth in Revenue from Operations Figure 66 : Year on Year growth in Revenue from Operations (In %), FY2023-FY2025 Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Aequs 53.48% 18.83% (4.19%) NA 17.03% Azad

29.42% 35.40% 34.21% NA 34.66% Engineering Unimech

159.06% 121.71% 16.36% NA 3.58% Aerospace Amber 64.68% (2.86%) 48.20% NA 24.72% Kaynes 59.45% 60.25% 50.79% NA 46.80% Dixon 13.98% 45.10% 119.66% NA 52.87% PTC Industries 22.52% 17.16% 19.93% NA 86.00% NA – Comparative data is not available EBITDA Figure 67: EBITDA (In INR Mn), FY2023-FY2025 CAGR Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 FY2023- FY2025 Aequs 630.56 1,455.10 1,079.69 578.22 841.06 30.85% Azad

723.10 1,165.90 1,613.10 NA NA 49.36% Engineering Unimech

345.63 791.86 920.60 488.50 383.40 63.20% Aerospace Amber 4,750.00 5,190.00 7,960.00 3,200.00 3,610.00 29.45% 281CAGR Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 FY2023- FY2025 Kaynes 1,683.00 2,542.00 4,107.00 1,490.00 2,610.00 56.21% Dixon 5,184.00 7,202.00 15,278.00 6,760.00 15,410.00 71.67% PTC

661.00 860.00 1,094.00 NA NA 28.65% Industries NA – Comparative data is not available, EBITDA Margin Figure 68: EBITDA Margin (In %), FY2023-FY2025 Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Aequs 7.76% 15.08% 11.68% 12.60% 15.66% Azad

28.73% 34.21% 35.27% NA NA Engineering Unimech

36.70% 37.93% 37.90% 40.49% 30.68% Aerospace Amber 6.86% 7.71% 7.98% 7.80% 7.10% Kaynes 14.95% 14.09% 15.09% 13.80% 16.50% Dixon 4.25% 4.07% 3.93% 3.70% 5.60% PTC Industries 30.15% 33.48% 35.51% NA NA NA – Comparative data is not available Profit / (Loss) for the period / year Figure 69 : Profit / Loss for the period / year (In INR Mn), FY2023-FY2025 CAGR Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 FY2023- FY2025 Aequs (1,094.95) (142.44) (1,023.46) (717.00) (169.77) (3.32%) Azad

84.73 585.80 865.34 380.05 620.41 219.58% Engineering Unimech

228.13 581.34 834.57 386.81 347.95 91.27% Aerospace Amber 1,637.76 1,394.67 2,511.51 960.00 740.00 23.83% Kaynes 951.96 1,832.89 2,934.33 1,109.85 1,960.26 75.57% Dixon 2,550.80 3,749.20 12,325.80 5,514.00 10,257.20 119.82% PTC

258.15 422.16 610.19 222.02 232.94 53.74% Industries NA – Comparative data is not available PAT Margin Figure 70 : PAT Margin (In %), FY2023-FY2025 Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Aequs (13.48%) (1.48%) (11.07%) (15.62%) (3.16%) Azad Engineering 3.37% 17.19% 18.92% 18.10% 21.94% Unimech Aerospace 24.23% 27.85% 34.35% 32.06% 27.84% Amber 2.36% 2.07% 2.52% 1.40% 2.30% Kaynes 8.45% 10.16% 10.78% 10.31% 12.41% Dixon 2.09% 2.12% 3.17% 3.04% 3.70% 282Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 PTC Industries 11.77% 16.44% 19.81% 18.62% 10.50% NA – Comparative data is not available Cash Conversion Cycle Figure 71 : Cash Conversion Cycle (In Number of days), FY2023-FY2025 Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Aequs 157 203 253 293 232 Azad Engineering 179 220 NA NA NA Unimech Aerospace 275 117 NA NA NA Amber NA NA NA NA NA Kaynes NA NA NA NA NA Dixon NA NA NA NA NA PTC Industries NA NA NA NA NA NA – Comparative data is not available Return on Equity (RoE) Figure 72 : Return on Equity (In %), FY2023-FY2025 Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Aequs (40.68%) (1.49%) (14.30%) (9.68%) (2.07%) Azad Engineering NA NA NA NA NA Unimech Aerospace 46.70% 53.53% 33.08% 19.80% 9.90% Amber 8.80% 6.90% 11.30% NA NA Kaynes 24.90% 22.80% 19.40% 17.60% 14.20% Dixon 22.40% 25.20% 47.50% NA NA PTC Industries 16.17% NA NA NA NA NA – Comparative data is not available Return on Capital Employed (ROCE) Figure 73 : Return on Capital Employed (In %), FY2023-FY2025 Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Aequs (3.72%) 2.84% 0.87% 0.67% 1.81% Azad Engineering 12.99% 19.00% 11.30% NA NA Unimech Aerospace 42.87% 54.36% 25.16% 19.50% 6.50% Amber 15.00% 12.61% 19.50% NA NA Kaynes 24.20% 22.00% 19.20% 18.60% 16.70% Dixon 33.40% 38.00% 48.50% NA NA PTC Industries NA NA NA NA NA NA – Comparative data is not available Net Debt to Equity Ratio Figure 74 : Net Debt to Equity Ratio, FY2023-FY2025 Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Aequs 2.54 0.55 0.99 0.86 0.98 283Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Azad Engineering 1.22 0.00 NA NA NA Unimech Aerospace NA NA 0.11 NA NA Amber 0.30 0.29 0.34 NA NA Kaynes 0.05 0.10 0.20 0.20 0.10 Dixon (0.05) (0.03) (0.02) NA NA PTC Industries 0.55 0.07 (0.09) NA NA NA – Comparative data is not available Consolidated Machining/Moulding Hours - Annual installed capacity (# hours per annum) Figure 75 : Consolidated Machining/Molding Hours - Annual installed capacity (# hours per annum), FY2023- FY2025 Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Aequs 27,99,736 28,68,185 29,19,058 13,65,574 14,57,184 Azad Engineering 5,79,814 6,00,000 NA NA NA Unimech Aerospace 1,25,100 2,22,990 6,33,840 NA NA Amber NA NA NA NA NA Kaynes NA NA NA NA NA Dixon NA NA NA NA NA PTC Industries NA NA NA NA NA NA – Comparative data is not available Capacity utilization (% per annum) Figure 76: Capacity utilization (% per annum), FY2023-FY2025 Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Aequs 39.19% 44.40% 41.77% 44.47% 43.63% Azad Engineering 86.23% 88.51% NA NA NA Unimech Aerospace NA NA 57.00% NA NA Amber NA NA NA NA NA Kaynes NA NA NA NA NA Dixon NA NA NA NA NA PTC Industries NA NA NA NA NA NA – Comparative data is not available Total Assets Figure 77 : Total Asset (In INR Mn), FY2023-FY2025 Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Aequs 13,216.91 18,229.83 18,598.40 18,635.00 21,343.51 Azad Engineering 5,892.08 7,970.79 18,606.98 9,728.79 19,554.64 Unimech Aerospace 933.41 1,756.34 8,072.55 NA NA Amber 62,433.24 65,931.98 84,280.98 64,270.00 91,440.00 Kaynes 14,187.32 32,651.77 46,412.17 37,962.39 67,333.41 Dixon 46,794.30 69,914.50 1,67,668.70 1,61,206.80 1,96,505.20 PTC Industries 5,529.13 8,956.85 15,838.37 15,281.25 17,460.77 NA – Comparative data is not available 284Fixed Asset Turnover Ratio (FATR) Figure 78 : Fixed Asset Turnover Ratio, FY2023-FY2025 Companies FY2023 FY2024 FY2025 6MFY2025 6MFY2026 Aequs 1.36 1.65 1.84 0.82 0.75 Azad Engineering NA NA NA NA NA Unimech Aerospace 3.51 5.16 2.30 4.90 1.90 Amber NA NA NA NA NA Kaynes NA NA NA NA NA Dixon NA NA NA NA NA PTC Industries NA NA NA NA NA NA – Comparative data is not available

Notes:

1. For notes and definitions of KPIs related to our company, please see “Key performance Indicators (“KPIs”)

2. The revenue from operations, EBITDA, Profit / (loss) for the period / year, Cash Conversion Cycle, ROCE, ROE, Net debt to equity ratio, Annual installed capacity (in machining hours), Capacity utilization (%), Total Assets and Fixed asset turnover ratio are traced from the Annual reports or investor presentation or publicly available documents on the company’s website or submitted to the stock exchanges for the respective fiscal period / year

3. EBITDA Margin for listed peer is calculated as EBITDA as per Annual reports or investor presentation or publicly available documents on the company’s website or submitted to the stock exchanges for the respective fiscal period / year as a percentage of revenue from operations of respective company for the respective fiscal period / year

4. PAT margin is calculated as Profit / (loss) for the period / year as per Annual reports or investor presentation or publicly available documents on the company’s website or submitted to the stock exchanges for the respective fiscal period / year as a percentage of revenue from operations of such listed peer company for the respective Fiscal year / period PEC Sector Threats and Challenges Threats There is a growing trend towards customized and energy-efficient products, resulting in increased demand for smaller batch sizes. Manufacturing small batches of precision components is time-consuming and expensive, making it difficult for manufacturers to recover their capital investment quickly. This risk is particularly acute for businesses lacking the scale to absorb such costs.

High Capital Investment and Operational Complexity:

Adopting state-of-the-art automation and precision manufacturing systems involves substantial upfront investment, which can be prohibitive for Small and Medium-sized Enterprises (SMEs). Managing and maintaining sophisticated equipment also requires specialized knowledge and working capital, because breakdowns can result in costly downtime.

Growing Miniaturization and Tighter Tolerances:

The push for miniaturized components to improve energy efficiency requires manufacturers to achieve tighter tolerances and higher precision. This necessitates continuous investments in advanced, often more expensive, machinery and need to upskill workers to achieve higher level of technical skill. Any discrepancies in quality can lead to significant operational failures, increasing the pressure on manufacturers.

Technological Obsolescence:

Technological obsolescence poses a significant threat to the Power, Energy, and Construction (PEC) sector, where rapid advancements can render existing systems and equipment outdated. As innovation accelerates, older technologies may no longer meet efficiency, safety, or environmental standards, leading to increased operational costs and regulatory non-compliance. This can result in stranded assets, reduced competitiveness, and the need for costly upgrades or replacements. Furthermore, workforce skills may lag evolving technologies, creating a 285knowledge gap. Companies that fail to adapt risk falling behind more agile competitors. Staying updated with technological trends is crucial for long-term sustainability and performance in the PEC sector.

Cybersecurity Risks:

Increased reliance on automation and digital systems exposes manufacturers to cyberattacks, which can disrupt operations and compromise sensitive data. The financial impact of such attacks is projected to rise, with the cost of cyberattacks in Indian manufacturing expected to reach USD 1 Bn by 2025.

Policy and Infrastructure Constraints:

While Government initiatives such as ‘Make in India’ have fostered manufacturing growth, however, India infrastructure still lags that of leading global manufacturing powers, there remains a lack of comprehensive policy support for widespread automation adoption, particularly for SMEs. Challenges in accessing markets, reliable distribution, and efficient local resources can also hinder growth and competitiveness.

Fluctuating Global Demand and Competition:

Precision engineered components manufacturers in India face stiff competition from global players, especially those with advanced technology and established market presence. Fluctuations in global demand, trade policies, and foreign exchange rates can further impact export-oriented businesses.

Impacts of Trump Tariff on Exports from India to US: • Cookware Exports – Indian cookware faces higher US tariffs, rising to nearly 50% after the cutoff date.

Though this could impact the sale of Indian cookware in the US due to reduced cost competitiveness, it is too early to ascertain the long-term impacts due to the tariff. • Toy Exports – A 50% tariff effective August 27, 2025, is expected to cause cancellations and delays of Indian toy shipments to the US in the short-term. With the US accounting for 40% – 50% of exports in FY2025, volumes may decline 8% –10% initially. It would be a challenge to assess the long-term impacts due to the tariffs in the current scenario.

• Electronic Enclosures Exports – Currently exempted from the Trump tariff. • Engineering Goods Exports – India’s annual engineering product exports to the US accounted to USD

18.28 Bn in FY2025, out of which around USD 12.50 Bn worth of engineering products are now subject to 50% duties, which is a risk in the short term.

Challenges

Raw Material Price Volatility:

The primary input for precision components especially Steel, Titanium, Alloys, and Composites are subjected to significant price fluctuations due to global events and macroeconomic factors. For instance, geopolitical disruptions such as the Russian invasion of Ukraine have led to sharp increases in steel prices, raising production costs and affecting demand.

Skill Shortages:

The sector faces a persistent shortage of skilled labour, particularly in areas like robotics, automation, and advanced machining.

286Higher Cost of Compliance:

Clients, particularly in aerospace and defense, demand extremely tight tolerances, and stringent quality standards.

This requires continuous investment in processes, documentation, and testing alongside investments in advanced equipment, skilled manpower, and robust quality control systems, leading to higher burden and costs of compliance for the firms.

Continuous Technological Upgradation Requiring Capital Investment:

Setting up and maintaining state-of-the-art facilities with advanced automation, robotics, and CNC machinery requires significant capital investment. Small and medium-sized contract manufacturers may struggle to access the necessary funding for setting up these facilities or facility upgrades / modifications.

Reliable Supply Chain and Distribution:

Efficient local sourcing of materials, strategic plant locations, and reliable distribution services are critical. Delays or disruptions in the supply chain can impact the ability to meet contract deadlines and quality requirements.

287OUR BUSINESS Some of the information in this section, including information with respect to our business plans and strategies, contain forward-looking statements that involve risks and uncertainties. You should read “Forward-Looking Statements” on page 36 for a discussion of the risks and uncertainties related to those statements and also the

section “Risk Factors” on page 37 for a discussion of the risks that may affect our business, financial condition, or results of operations, and “Restated Consolidated Financial Information” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” on pages 383 and 539, respectively, for a discussion of certain factors that may affect our business, financial condition or results of operations. Our actual results may differ materially from those expressed in or implied by these forward-looking statements.

We have included several operational and financial performance indicators in this Prospectus, many of which may not be derived from our Restated Consolidated Financial Information. The manner in which such operational and financial performance indicators are calculated and presented, and the assumptions and estimates used in such calculations, may vary from that used by other companies in India and other jurisdictions.

Unless otherwise indicated, the industry and market-related information contained in this Prospectus is derived from the report titled “An Assessment of Aerospace and Consumer PEC Industry” dated November 14, 2025 (the “F&S Report”), which has been commissioned and paid for by our Company for an agreed fee for the purposes of confirming our understanding of the industry exclusively in connection with the Offer. We officially engaged Frost & Sullivan (India) Private Limited (“F&S”), in connection with the preparation of the F&S Report pursuant to an engagement letter dated December 10, 2024, as supplemented by a subsequent engagement letter dated September 8, 2025. A copy of the F&S Report was available on the website of our Company from the date of filing of the Red Herring Prospectus at www.aequs.com/investor/ until the Bid/Offer Closing Date and has also been included in “Material Contracts and Documents for Inspection – Material Documents” on page 682. The information included in this section includes excerpts from the F&S Report and may have been reordered by us for the purposes of presentation. There are no parts, data or information (which may be relevant for the Offer), that have been left out or changed in any manner. For more information, see “Risk Factors - This Prospectus contains information from third parties, including an industry report prepared by an independent third-party research agency, Frost & Sullivan (India) Private Limited, which we have commissioned and paid for purposes of confirming our understanding of the industry exclusively in connection with the Offer” on page 85.

Unless the context otherwise indicates, all references to the terms “we”, “us” and “our” are to our Company and our Subsidiaries on a consolidated basis. Our Company’s Financial Year commences on April 1 and ends on March 31 of the immediately subsequent year, and references to a particular Financial Year are to the 12 months ended March 31 of that particular year. Unless otherwise indicated or the context otherwise requires, the financial information as of and for the six months period ended September 30, 2025 and 2024, and the Financial Years 2025, 2024 and 2023 included herein is derived from the Restated Consolidated Financial Information included in this Prospectus.

For definitions of technical and industry related terms used in this section, please see “Definitions and Abbreviations – Technical and Industry Related Terms” on page 15.

OVERVIEW We are the only precision component manufacturer operating within a single special economic zone in India to offer fully vertically integrated manufacturing capabilities in the Aerospace Segment, which sets us apart from other contract manufacturers with selective manufacturing capabilities amongst our peers (Source: F&S Report, see “Industry Overview”, para 4 on page 296). Precision components are precisely machined parts that are designed and manufactured to exact specifications and are commonly supplied to OEM customers and system integrators. We had one of the largest portfolios of aerospace products in India, as of March 31, 2025 (Source:

F&S Report, see “Industry Overview”, para 2 on page 246). Our diverse product portfolio includes components for engine systems, landing systems, cargo and interiors, structures, assemblies and turning for our aerospace clients. For the six months period ended September 30, 2025 and the Financial Year 2025, our net external revenue from the Aerospace Segment was ₹4,739.53 million and ₹8,246.41 million, respectively.

Our advanced manufacturing capabilities also enable us to enter into new business segments by leveraging existing capabilities. While we primarily operate in the Aerospace Segment, over the years, we have expanded our product portfolio to include consumer electronics, plastics, and consumer durables for our consumer clients. Our diverse consumer product portfolio includes consumer durables such as cookware and small home appliances, plastics such as outdoor toys, figurines, toy vehicles and components for consumer electronics such as portable computers 288and smart devices.

We are one of the few manufacturers in India with niche metallurgy capabilities, specializing in precision machining of high-end alloys, including titanium alloys for our aerospace clients (Source: F&S Report, see “Industry Overview”, para 8 on page 235). Further, we are the leading company within a single special economic zone in terms of end-to-end manufacturing capabilities (machining, forging, surface treatment and assembly) for the Aerospace Segment in India, based on the number of capabilities and approvals (Source: F&S Report, see “Industry Overview”, para 2 on page 236).

We operate in three unique, engineering-led vertically integrated precision manufacturing “ecosystems” in India (Source: F&S Report, see “Industry Overview”, para 4 on page 238). These manufacturing ecosystems comprise our Company, few of our suppliers and our Joint Ventures, which allow us to manufacture products in accordance with our clients’ specifications. Global aerospace companies, such as Airbus and Boeing are focused on enhancing their supply chain efficiency and accordingly, prefer suppliers who are able to offer “one-stop-shop” capabilities to support their complex manufacturing and integration needs, due to the benefits associated with quality management, cost and working capital efficiencies (for instance, on account of reduced logistics and warehousing costs as a result of co-located facilities), reduced lead times and reduced global carbon footprint (Source: F&S Report, see “Industry Overview”, para 2 on page 236). Our manufacturing ecosystems enable large-scale, timely production of complex products, meeting global OEMs’ stringent requirements in both Aerospace Segment and Consumer Segment. In recent years, we have strategically prioritized the selective outsourcing of lower value- added activities, including 3-axis and 4-axis machining, within and outside our manufacturing ecosystem to third- party subcontractors, allowing us to concentrate on producing more complex and higher value components through higher value-added activities, including 5-axis machining. While we continue to maintain our capacity in 3-axis and 4-axis machining, our focus going forward is on expanding our capabilities in 5-axis machining, as we move up the value chain. Further, we aim to leverage our existing aerospace manufacturing capabilities to diversify customer base in Aerospace Segment by pursuing opportunities to develop new relationships and strengthening our presence in the Aerospace Segment.

As of September 30, 2025, we produced over 5,000 products within the Aerospace Segment under a variety of manufacturing and assembly programs established with our aerospace customers, including programs for single aisle (such as A220, A320, B737) and long range (A330, A350, B777, B787) commercial aircrafts. We had one of the largest portfolios of aerospace products in India, as of March 31, 2025 (Source: F&S Report, see “Industry Overview”, para 2 on page 246). The combination of our scale, vertically integrated manufacturing ecosystems and qualified engineering talent enables us to scale production while meeting contracted timelines with stringent quality and safety standards. This has also allowed us to achieve 100% in-country value addition for select products. We perform our own quality checks on suppliers, by regularly monitoring and ensuring that the raw materials supplied to us meet our and our customers’ stringent quality standards, which in turn provides us with an ability to have better control over our quality and increase our competitive ability. Our Company has instituted a quality assurance framework to ensure that all materials and products meet both international standards and those of our customers. We conduct quality checks on suppliers, sourcing raw materials exclusively from approved and qualified vendors. Each manufacturing facility is supported by a dedicated quality assurance team that conduct thorough inspections at all stages of production, from raw material intake to final output. Our manufacturing facilities within our manufacturing clusters hold multiple internationally recognized certifications such as ISO 9001:2015, AS9100D, and NADCAP. Our quality control infrastructure, including inspection equipment such as coordinate measuring machines, optical measuring machines and non-destructive testing equipment, supports precise validation of product specifications. In addition, our manufacturing facilities are periodically inspected and audited by regulatory authorities and customers.

289We commenced manufacturing of aero-structure components and aero-engine components, for aerospace clients in our units in the Belagavi Manufacturing Cluster in 2009. Over the past 15 years, we have consistently grown our business by developing and acquiring new manufacturing capabilities, and diversifying our product portfolio and customer base across the Aerospace Segment and Consumer Segment. We strategically expanded our manufacturing operations in North America and France, through acquisitions in 2015 and 2016, respectively, which have allowed us to acquire new capabilities in the Aerospace Segment, grow our footprint in North America and Europe, and expand our portfolio of products.

The graphics below illustrate our product portfolio across the Aerospace Segment and Consumer Segment:

Aerospace segment:

290Consumer segment: *(Source: F&S Report, see “Industry Overview”, para 2 on page 252) We leverage our engineering capabilities to create innovative products and engineering solutions for our OEM customers. Our manufacturing capabilities allow us to develop fully manufactured products based on initial concepts and technical specifications from customers. Further, we have been able to enter into new business segments by leveraging existing core capabilities. As a platform for custom manufacturing based on specific client requirements, we are committed to developing innovative manufacturing processes while continuously improving existing ones to produce high-quality and reliable products in an efficient manner.

We have also entered into joint ventures to enhance our capabilities to develop new products and deliver engineering solutions, by harnessing the complementary expertise of our joint venture entities for production of complex and niche products required by our customers. Our joint venture SQuAD Forging India Private Limited (“SQuAD”), has equipped us with enhanced capabilities to, among others, forge small to medium-sized aero- structural parts for engines, landing gear and braking system components in aluminium, steel, titanium or nickel- based alloys. Further, our joint venture with Magellan Aerospace Limited, Canada formed in 2007, Aerospace Processing India Private Limited (“API”), has enabled us to provide innovative surface treatment solutions.

Further, our joint venture with Tramontina, Aequs Cookware Private Limited equips us with technical capabilities to develop innovative consumer products. However, our existing joint ventures may be discontinued in the future, and our future joint ventures expose us to other potential risks, including risks associated with unforeseen or hidden liabilities, sharing proprietary information, among others. For details, see “Risk Factors – Any difficulties in identifying, consummating and integrating acquisitions, investments or alliances or undertaking any internal restructuring may expose us to potential risks and have an adverse effect on our business, results of operations, financial condition and cash flows” on page 76.

We operate within precision manufacturing vertical for electronic components which is specifically notified as eligible sectors under various Production Linked Incentive (“PLI”) schemes promulgated by the Government of India as well as corollary incentive frameworks introduced by several State Governments. In furtherance of our growth plan and with a view to enhancing domestic value addition, backward integration and import substitution, our Company intends to participate in and secure incentives available under (i) the Scheme for Promotion of Manufacturing of Electronic Components and Semiconductors for establishing and expanding its electronics manufacturing services line for precision sensor modules and control units, and (ii) complementary State-level capital subsidy, interest subsidy, stamp duty exemption, electricity duty exemption and SGST reimbursement programmes, thereby optimising its capital expenditure structure, accelerating capacity expansion and reinforcing its competitive cost position. By systematically leveraging these initiatives, each designed to reward incremental sales, promote scale, foster technological innovation and cultivate globally competitive manufacturing capabilities, our Company expects to enhance its return on invested capital, diversify its customer base, deepen localisation of its supply chain and fortify its status as a preferred partner to original equipment manufacturers.

Since the commencement of our operations, we have cultivated long-standing relationships with customers, including marquee global OEM customers across the aerospace and consumer industries, and we have over the years established ourselves as key global suppliers for such customers. Our key clients include Airbus, Boeing, Bombardier, Collins Aerospace, Spirit Aerosystems Inc, Safran, GKN Aerospace, Mubea Aerostructures, Honeywell, Eaton and Sabca in the Aerospace Segment, and, Hasbro, Spinmaster, Wonderchef, and Tramontina 291in the Consumer Segment.

Due to the collaborative nature of the manufacturing which we undertake along with our OEM customers, who have very specific product requirements and stringent quality standards, we have been able to maintain high levels of client stickiness and retention. Our deep understanding of our OEM customers’ requirements allows us to continuously innovate and upgrade our capabilities in order to develop complex products with quick turnaround times. Extensive testing and validation processes required to fulfil very specific product requirements and stringent quality requirements by aerospace OEM customers create a significant barrier to entry for new market entrants (Source: F&S Report, see “Industry Overview”, para 8 on page 235). Once a contract is awarded by an OEM, significant amount of time is spent on design, manufacturing and first article inspection of the product. Onboarding a new supplier will make the OEM undergo the same processes and this is why OEMs are often reluctant to switch suppliers. We have won the ‘Ramp-up Champion Award’ for outstanding contribution to the Airbus ramp-up at the Airbus Global Supplier Conference 2024. This recognition rewards operational excellence and resilience in a volatile, uncertain, complex, and ambiguous (VUCA) environment, and is a testament to our ability to manufacture complex and critical components while consistently delivering quality and on-time performance for our clients.

While the Aerospace Segment has historically contributed to a majority of our revenue from operations, we have been able to increase the contribution of revenues from our Consumer Segment. The table below sets forth the break-up of our net external revenue from our Aerospace Segment and Consumer Segment:

Metric Unit For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Net external revenue – Aerospace ₹ in million 4,739.53 3,947.23 8,246.41 7,569.78 5,851.82 Segment Net external revenue – Aerospace % 88.23% 86.00% 89.19% 78.44% 72.06% Segment, as a percentage of revenue from operations Net external revenue – Consumer ₹ in million 632.06 642.50 999.65 2,080.96 2,269.50 Segment Net external revenue – Consumer % 11.77% 14.00% 10.81% 21.56% 27.94% Segment, as a percentage of revenue from operations We are led by our Individual Promoter, Executive Chairman and Chief Executive Officer, Aravind Shivaputrappa Melligeri, who provides strategic vision and leadership to the Aequs group. Further, we also benefit from a seasoned management team with significant industry experience. Further, we are also backed by our investors, Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II, Amansa Investments Ltd, Steadview Capital Mauritius Limited, Catamaran Ekam (acting through its trustee Catamaran Advisors LLP), Sparta Group LLC, SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term and Think India Opportunities Master Fund LP which collectively hold 25.05% of our pre-Offer Equity Share capital.

Financial and Operational Performance Parameters The following table sets forth certain key financial and operational information, which we track as key performance indicators, as of the dates and for the periods/years indicated:

Key Performance Indicator Units As of and for the six months As of and for the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Revenue from Operations (1) ₹ in 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 million Year-on-year / Period-on-period % 17.03 N/A (4.19) 18.83 N/A increase in Revenue from Operations (2) Net external revenue – Aerospace ₹ in 4,739.53 3,947.23 8,246.41 7,569.78 5,851.82 Segment (3) million Net external revenue – Consumer ₹ in 632.06 642.50 999.65 2,080.96 2,269.50 Segment (4) million Loss for the period/year(5) ₹ in (169.77) (717.00) (1,023.46) (142.44) (1,094.95) 292Key Performance Indicator Units As of and for the six months As of and for the Financial Year period ended September 30, 2025 2024 2025 2024 2023 million Total assets (6) ₹ in 21,343.51 18,635.00 18,598.40 18,229.83 13,216.91 million EBITDA (7) ₹ in 841.06 578.22 1,079.69 1,455.10 630.56 million EBITDA Margin (8) % 15.66% 12.60 11.68 15.08 7.76 EBITDA - Aerospace Segment (9) ₹ in 1,169.61 872.48 1,597.75 1,743.73 833.59 million EBITDA - Aerospace Segment % 24.68 22.10 19.38 23.04 14.24 Margin (10) EBITDA - Consumer Segment (11) ₹ in (151.10) (190.82) (286.71) (155.68) (155.50) million EBITDA - Consumer Segment % (23.91) (29.70) (28.68) (7.48) (6.85) Margin (12) PAT margin (13) % (3.16) (15.62) (11.07) (1.48) (13.48) Cash Conversion Cycle (in Days) Number 232 293 253 203 157

(14) of days Return on Capital Employed (15) % 1.81 0.67 0.87 2.84 (3.72) Return on Equity (16) % (2.07) (9.68) (14.30) (1.49) (40.68) Net Debt to Equity Ratio (17) Times 0.98 0.86 0.99 0.55 2.54 Fixed Asset Turnover (18) Times 0.75 0.82 1.84 1.65 1.36 Consolidated Installed Capacity Hours 1,457,184.00 1,365,574.00 2,919,058.00 2,868,185.00 2,799,736.00

(19) per annum Capacity utilization (per annum) % 43.63 44.47 41.77 44.40 39.19

(20) * Not annualised

Notes:

1. Revenue from Operations is as per the Restated Consolidated Financial Information

2. Percentage growth in Revenue from Operations for the relevant period/Fiscal over Revenue from Operations for the immediately preceding period/Fiscal.

3. Net external revenue – Aerospace Segment is as per the Restated Consolidated Financial Information

4. Net external revenue – Consumer Segment is as per the Restated Consolidated Financial Information

5. Loss for the period/ year for the respective periods/fiscals is as per the Restated Consolidated Financial Information

6. Total Assets is as per the Restated Consolidated Financial Information

7. EBITDA is calculated as Loss for the period/ year as per restated consolidated statement of profit and loss plus (i) Total tax expenses;

(ii) finance costs; and (iii) depreciation and amortisation expense adjusted for (iv) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; (v) exceptional items gain/(loss); and (vi) (Loss)/profit from discontinued operations before tax.

8. EBITDA Margin is calculated as EBITDA as a percentage of Revenue from Operations.

9. EBITDA - Aerospace Segment is calculated as Profit/(Loss) before tax for the year for Aerospace Segment plus (i) finance costs; and

(ii)depreciation and amortisation expense adjusted for (iii) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; and (iv) Exceptional items gain/(loss); of the Aerospace segment as per the Segment Reporting in the Restated Consolidated Financial Information

10. EBITDA - Aerospace Segment Margin % - EBITDA- Aerospace Segment as a percentage of Net External Revenue of the Aerospace Segment as per the segment reporting in the Restated Consolidated Financial Information.

11. EBITDA - Consumer Segment is calculated as Profit / (Loss) for the year before tax for Consumer Segment plus (i) finance costs; and

(ii) depreciation and amortisation expense adjusted for (iii) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; and (iv) exceptional items gain/(loss); of the Consumer segment as per the segment reporting in the Restated Consolidated Financial Information.

12. EBITDA Consumer Segment Margin % - EBITDA - Consumer Segment as a percentage of Net External Revenue of the Consumer Segment as per the segment reporting in the Restated Consolidated Financial Information.

13. PAT Margin is calculated as Loss for the period/ year for the respective fiscals as a percentage of Revenue from Operations for respective fiscals.

14. Cash Conversion Cycle (in days) is calculated as aggregate of trade receivables days and Inventory days as reduced by trade payables days. i. Trade receivables days is calculated as outstanding trade receivables at the end of period/fiscal divided by revenue from operations for the period/year multiplied by 183 or 365 days (as applicable).

ii. Inventory days is calculated as inventory at the end of period/fiscal divided by cost of goods sold for the year multiplied by 183 or 365 days (as applicable). The cost of goods sold is aggregate of cost of raw material consumed, purchases of stock-in-trade and changes in inventories of finished goods and work-in-progress.

iii. Trade payable days is calculated as outstanding trade payables at the end of period/fiscal divided by aggregate of Purchase of Raw Materials and Purchases of stock-in-trade for the year multiplied by 183 or 365 days (as applicable).

15. Return on Capital Employed is calculated as Earnings Before Interest and Tax as a percentage of Capital Employed i. Earnings Before Interest and Tax is calculated as Loss before tax from continuing operations as adjusted to Exceptional items gain / (loss), and Finance costs.

ii. Capital Employed is the sum of Total Equity, Non-Current & Current Borrowings and Non-Current and Current lease Liabilities.

16. Return on Equity is calculated as Loss from continuing operations as a percentage of Total Equity as per the Restated Consolidated 293Financial Information.

17. Net Debt to Equity ratio for the relevant fiscals. Net debt is calculated as non-current borrowings plus current borrowings plus non- current lease liabilities plus current lease liabilities less cash and cash equivalents less bank balances other than cash and cash equivalent.

18. Fixed Asset Turn Over Ratio is calculated as Revenue from Operations divided by Total Fixed Assets. Total Fixed assets comprise of Property, plant & equipment and Right of Use Assets.

19. Installed Capacity (in machining/molding hours) is the capacity available at the manufacturing facilities of the Company and subsidiaries at the end of the given year as certified by independent chartered engineers, Vishvakarma Consultancy Services Private Limited (formerly known as Vishvakarma Consultants).

20. Capacity utilization is calculated as Actual Production (in machining hours) as a percentage of Installed Capacity (in machining/ molding hours) as certified by independent chartered engineers, Vishvakarma Consultancy Services Private Limited (formerly known as Vishwakarma Consultants).

21. For details in relation to reconciliation of Non-GAAP financial measures, see “Other Financial Information - Non-GAAP Financial Measures - Reconciliation of Non-GAAP Measures” on page 535.

OUR STRENGTHS Advanced and vertically integrated precision manufacturing capabilities We are the leading company within a single special economic zone in terms of end-to-end manufacturing capabilities (machining, forging, surface treatment and assembly) for the Aerospace Segment in India, based on the number of capabilities and approvals (Source: F&S Report, see “Industry Overview”, para 2 on page 236).

Across our three manufacturing ecosystems in India and two dedicated aerospace facilities outside India, that we operate in, we had an aggregate capacity of 2,919,058 annual machining/molding hours for products within the Aerospace Segment and Consumer Segment, and over 200 computer numerical control (“CNC”) machines for Aerospace Segment and 161 molding machines deployed for consumer products, each as of September 30, 2025.

Our extensive machining capabilities enable us to manufacture critical and complex components, such as engine systems, landing systems, at a large scale and in a timely manner.

We offer advanced manufacturing solutions across the precision manufacturing value-chain. Our core capabilities include 3/4/5 axis milling and turned machining of various grades of material (such as aluminium, steel, inconel and titanium), forging, metal forming advanced surface treatments and secondary processes, including precision surface finishing and post-processing techniques, aero assembly and blow molding, injection molding, which can be deployed across sectors. These capabilities allow us to manufacture components from start-to-finish, including some of the most critical and technically complex products within the Aerospace Segment in the industry. Further, in the Consumer Segment, these capabilities, which we also deploy within the Aerospace Segment, allow us to manufacture products such as components for portable computers and smart devices, which are high-precision consumer products that are manufactured using precision machining capabilities, as well as plastics such as outdoor toys, figurines and toy vehicles. These capabilities allow us to manufacture complex products for our clients at a large scale, and enter into new business segments by leveraging existing capabilities.

We are differentiated by our advanced manufacturing capabilities, including machining, forging, surface treatment and plastic molding, within a single special economic zone which we have developed over the past 15 years (Source: F&S Report, see “Industry Overview”, para 1 on page 238). Some of our advanced manufacturing

capabilities include the following:

294• we operate a hydraulic closed-die press which we utilize for forging, at our facility in Belagavi Manufacturing Cluster, through the joint venture SQuAD; • we operate machining capability for manufacturing products within the Aerospace Segment, comprising 1,719,358 machining hours and over 200 CNC machines;

• for surface treatment, our facility at Belagavi Manufacturing Cluster was approved by Airbus and Boeing, and is operated by the joint venture which we entered into with Magellan Aerospace Limited, Canada in 2007;

• for plastic molding, our integrated molding facility at Koppal Manufacturing Cluster has molding capacity (between 80T to 450T) and blow molding capacity (between 1L to 15L) in India; and • in respect of aero assemblies, we assemble non-operable door panels and structure (emergency exit panel) at our facility in Belagavi, Karnataka.

The images below set out an overview of our manufacturing capabilities, including the special processes undertaken by us, across the Aerospace Segment and Consumer Segment:

Aerospace segment 295Consumer segment:

Our advanced manufacturing capabilities also enable us to enter into new business segments by leveraging existing capabilities across existing business segments. For example, our advanced manufacturing capabilities in the Aerospace Segment enabled us to enter into the consumer electronics business in 2021-2022, by leveraging and adapting our existing capabilities in the Aerospace Segment. There is a high barrier to enter precision manufacturing business segments, due to the substantial investment required to establish advanced precision manufacturing capabilities, develop proof of concept and cultivate relationships with global OEMs (Source: F&S Report, see “Industry Overview”, para 1 on page 296).

Through our extensive manufacturing infrastructure and relationships, we are able to offer end-to-end capabilities to customers. Our manufacturing infrastructure has received process approval certifications from industry bodies such as Nadcap and Bureau Veritas, and the Belgavi Manufacturing Cluster, Koppal Manufacturing Cluster and Hubballi Manufacturing Cluster are ISO-certified for quality, information security, employee safety and environment.

Operations in unique, engineering-led vertically-integrated precision manufacturing ecosystems We are the only precision component manufacturer operating within a single special economic zone in India to offer fully vertically integrated manufacturing capabilities in the Aerospace Segment, (Source: F&S Report, see “Industry Overview”, para 4 on page 238) which sets us apart from other contract manufacturers with selective manufacturing capabilities amongst our peers. There is a high barrier to enter precision manufacturing business segments, due to the substantial investment required to establish advanced precision manufacturing capabilities, develop proof of concept and cultivate relationships with global OEMs (Source: F&S Report, see “Industry Overview”, para 1 on page 296). Our capabilities and the success of the manufacturing ecosystems are the result of over two decades of experience and collaboration with customers and suppliers, providing us competitive advantages within the precision component manufacturing industry.

We operate in three unique, engineering-led vertically integrated precision manufacturing “ecosystems” in India (Source: F&S Report, see “Industry Overview”, para 4 on page 296). These comprise a 1,231,721 square feet of precision component manufacturing facilities for the Aerospace Segment located in a special economic zone in Belagavi, Karnataka. For our Consumer Segment we have 299,957 square feet of consumer electronics and consumer durables products manufacturing facilities, located in Hubballi, Karnataka and 554,138 square feet of plastics manufacturing facilities, located in Koppal, Karnataka. The manufacturing ecosystems comprise co- located manufacturing facilities (operated either by us, our joint ventures or by our contract manufacturers) and other contract manufacturers and partners that we collaborate with. In addition, we also operate two dedicated precision component manufacturing facilities for the Aerospace Segment in Cholet (France) and Paris, Texas (the 296U.S.).

Manufacturing ecosystems enable us to produce complex products at a large scale and in a timely manner to meet our global OEM customers’ requirements across the Aerospace Segment and Consumer Segment. As of September 30, 2025, we produced over 5,000 products within the Aerospace Segment under a variety of manufacturing and assembly programs, including programs for single aisle (such as A220, A320, B737) and long range (such as A330, A350, B767, B777, B787) commercial aircrafts, established with our aerospace customers.

In addition to our scale, the vertical integration between different stages of the value-addition lifecycle at the manufacturing ecosystems, which comprise co-located manufacturing facilities (operated either by us, our joint ventures or by our contract manufacturers), together with our workforce of qualified engineers, enable us to scale the production of components for customers within contracted timelines, while continuing to meet their quality, delivery and safety standards. This has allowed us to create 100% in-country value for certain products such as engine front spinner and wheels for landing systems). Further, over the past few years, we have selectively outsourced lower value-added processes to third-party sub-contractors primarily located at the manufacturing ecosystems, which has allowed us to focus more on the manufacture of higher value-added products.

We maintain a healthy availability of manufacturing space for bespoke manufacturing requirements of our customers, with 2,201,098 square feet of aggregate manufacturing area (as of September 30, 2025) across the units in three manufacturing clusters in India that we operate in and two manufacturing facilities outside India available for expansion and scaling production in a timely manner. Further, we adopt an “asset-light” approach to manufacturing through our Group Companies, Aequs SEZ Private Limited and Hubballi Durable Goods Cluster Private Limited, which lease buildings and common amenities for the manufacturing ecosystems in India to us.

Thus, as compared to directly owning such buildings and common amenities on our balance sheets, we have been able to maintain an “asset-light” approach to manufacturing by leasing such assets through our Group Companies.

Aequs SEZ Private Limited provides us with fully-integrated campuses with master planned and managed services, and turnkey build-to-suit facilities. This has enabled us to rapidly set up manufacturing plants, as a result of the availability of land, established infrastructure and qualified workforce. At the manufacturing ecosystems, we focus on prudent space utilization and lean material flows, as well as our capital management practices, whereby we implement variable capacity manufacturing for many of our components.

As we produce complex products at a large scale and in a timely manner to meet our global OEM customers’ requirements across the Aerospace Segment and Consumer Segment, we continuously maintain a healthy availability of installed capacity and a moderate capacity utilization across our manufacturing facilities, to ensure that we are able to readily fulfill our global OEM customers’ bespoke manufacturing requirements and accelerated manufacturing timelines. For details relating to our capacity utilization for the Aerospace Segment and Consumer Segment, see “Our Business – Description of Our Business – Manufacturing Clusters and Facilities” on page

312.

The vertically integrated precision manufacturing ecosystems which we operate in enable us to offer customization of specialized and niche components at scale and in a timely manner, to our customers. Integration of the value-addition supply chain also offers sustainability benefits, enabling customers to reduce their global carbon footprint. The increasing emphasis by global OEMs on environmental, social and governance related issues, has resulted in their preference to work with suppliers with integrated, end-to-end manufacturing capabilities in a single cluster, such as our Company, to reduce global carbon footprint (Source: F&S Report, see “Industry Overview”, para 3 on page 312). Our integrated end-to-end manufacturing capabilities in a single cluster have enabled our customers to reduce their transportation costs as we are able to manufacture and supply products under one roof at our manufacturing cluster (Source: F&S Report, see “Industry Overview”, para 1 on page 238). We were awarded the Airbus Innovation Award in 2016 in recognition of our integrated, end-to-end manufacturing capabilities. Below is a chart which shows vertical integration through our manufacturing facilities

in Belagavi Manufacturing Cluster:

297We have a qualified workforce of 4,538 employees (including contract labourers) as of September 30, 2025, of which 855 are engineers. We recruit qualified engineers and regularly train our workforce to improve our manufacturing capabilities. We have instituted training initiatives on various areas such as, cosmetic inspection, part handling and material handling, procedure for design and validation of tooling for heat treatment, product safety. The manufacturing ecosystems are located in proximity of six engineering colleges, which provides us with a pool of engineering graduates who work in our facilities.

Further, we have long-term joint ventures with global manufacturers such as Magellan Aerospace Limited, Canada, Tramontina and Aubert & Duval SAS that further enhance our capabilities and drive sustained growth.

Further, we have purchase orders with certain key suppliers of raw materials listed on the ‘Qualified Products List’ or ‘Qualified Products Database’, which sets out an approved list of suppliers by our global OEM customers, which further enables us to act as a single point of contact for the overall component value-addition process.

The increasing outsourcing by OEMs enables them to focus on their core offerings while relying on specialized suppliers, such as our Company, for high-quality components (Source: F&S Report, see “Industry Overview”, para 2 on page 230). This shift from standalone suppliers to vertically integrated suppliers, combined with regulatory support and the rising role of India in manufacturing, positions us favorably to capture a larger market share (Source: F&S Report, see “Industry Overview”, para 2 on page 230). The growing demand for wearables and personal devices, coupled with OEMs’ China+1 strategy, also positions India as an alternative supply base (Source: F&S Report, see “Industry Overview”, para 2 on page 230). Further, India is positioned as a major beneficiary of the Europe+1 strategy, attracting substantial foreign direct investment from European companies in the manufacturing sector including Aerospace Segment (Source: F&S Report, see “Industry Overview”, para 5 on page 230). Accordingly, our approach to manufacturing through the manufacturing ecosystems, our diversified business model and product portfolio enable us to generate growth and profitability and enhance our operational efficiency (Source: F&S Report, see “Industry Overview”, para 3 on page 242).

Manufacturing presence across three continents with strategic proximity to end customers We have a manufacturing presence across India, U.S. and France, with strategic proximity to global OEMs, which enables us to create innovative products and engineering solutions for these OEMs. We are one of the few companies in India in the Aerospace Segment with a presence in three continents, which enables access to skilled workforce with diverse backgrounds and expertise, apart from the closeness to the customer which helps in our long-term customer relationships (Source: F&S Report, see “Industry Overview”, para 2 on page 242). Below is

a chart which shows our global delivery sites:

298The table below sets out a country-wise breakdown of our net external revenue from the Aerospace Segment for the periods/years indicated:

Particulars For the six months period ended For the six months period ended September 30, 2025 September 30, 2024 Amount (in ₹ % of net Amount (in ₹ % of net million) external million) external revenue from revenue from Aerospace Aerospace Segment Segment Net external revenue from Aerospace Segment - 3,582.85 75.60 2,911.43 73.76 India Net external revenue from Aerospace Segment - 552.67 11.66 464.04 11.76 France Net external revenue from Aerospace Segment - 604.01 12.74 571.76 14.48 USA Total net external revenue from Aerospace 4,739.53 100.00 3,947.23 100.00 Segment Particulars Financial Year 2025 Financial Year 2024 Financial Year 2023 Amount (in % of net Amount (in % of net Amount (in % of net ₹ million) external ₹ million) external ₹ million) external revenue revenue revenue from from from Aerospace Aerospace Aerospace Segment Segment Segment Net external revenue from Aerospace 6,232.30 75.58 5,718.50 75.54 4,620.31 78.96 Segment - India Net external revenue from Aerospace 991.53 12.02 811.22 10.72 596.33 10.19 Segment - France Net external revenue from Aerospace 1,022.58 12.40 1,040.06 13.74 635.18 10.85 Segment - USA Total net external revenue from 8,246.41 100.00 7,569.78 100.00 5,851.82 100.00 Aerospace Segment Our geographic presence across India, U.S. and France has enabled us to develop specialized capabilities and develop closer relationships with customers located in these continents, which in turn has allowed us to expand our footprint and increase our customer base across these continents. In the past, in addition to organically developing our manufacturing capabilities at the manufacturing ecosystems in India, we have undertaken strategic acquisitions to further enhance our offerings and to leverage technology available in U.S. and France. For instance, in 2015, we acquired T&K Machine (based in Texas, U.S.), which was renamed Aequs Aero Machine Inc., a company that produces machined parts and assemblies for the aerospace industry. The acquisition of this U.S.

export control approved company helped us expand our footprint in the North American market and serves as a 299manufacturing and logistics facility for our North American customers. Further, this acquisition also allowed us to be closer to our US based clients (such as Boeing and Spirit). In addition, in 2016, we acquired the SIRA Group in France which provided us with machining, assembly, fabrication and testing (for example, for engines and landing gear) capabilities. Further, this acquisition also allowed us to be closer to our Europe based clients (such as Safran and Collins Aerospace). Our strategic geographic presence across India, U.S. and France, along with our advanced manufacturing solutions, not only positions us as a competitive global manufacturing platform that cater to a broad customer base across these three continents, but also helps in near shoring business processes to the U.S. and France.

Comprehensive precision product portfolio across high value segments As of September 30, 2025, we produced over 5,000 products within the Aerospace Segment under a variety of manufacturing and assembly programs established with our aerospace customers, including programs for single aisle (such as A220, A320, B737) and long range (A330, A350, B767, B777, B787) commercial aircrafts. We had one of the largest portfolios of aerospace products in India, as of March 31, 2025 (Source: F&S Report, see “Industry Overview”, para 2 on page 246). We are a Tier-1 supplier of highly engineered precision components for certain global OEMs, and have a diversified range of product offerings across the Aerospace Segment and Consumer Segment. Our aerospace product portfolio comprises distinct products across engine systems, landing systems, cargo and interiors, structures, assemblies and turning. We focus on high value-added products like engine and landing components, in the Aerospace Segment. We enhance our operational efficiencies, by increasing our procurement of raw materials from domestic suppliers as compared to international suppliers, which in turn will reduce our raw material costs and improve our margins. Further, in the Consumer Segment, our product portfolio spans across components for portable computers and smart devices, outdoor toys, figurines, toy vehicles and non-stick cookware.

Our established track record in the Aerospace Segment gives us credibility as we aim to venture into adjacent precision driven business segments. Further, the large scale, advanced manufacturing ecosystems have allowed us to develop a platform that can identify and capitalize on opportunities for future expansion of product lines.

We have leveraged our core capabilities (such as surface treatment, forging, assembly, among others) in manufacturing of products within the Aerospace Segment to manufacture consumer products. The consumer electronics products that we manufacture (portable computers and smart devices) have high barriers to entry (Source: F&S Report, see “Industry Overview”, para 1 on page 261). We also aim to leverage our platform to further grow our portfolio of consumer electronics and consumer durable products. For details, see “- Our Strategies – Grow our portfolio of consumer products” on page 303.

Long-standing relationships with high entry barrier global customers We have established long-standing relationships with high entry barrier global customers, such as Airbus, Collins Aerospace, Spirit Aerosystems Inc., Safran and Boeing in the Aerospace Segment, and Hasbro, Spinmaster, Wonderchef, and Tramontina in the Consumer Segment. Over the years, we have also established ourselves as Tier-1 suppliers for such OEM customers. As of September 30, 2025, our three largest customer groups had an average tenure of 15 years with us. Our five largest customer groups collectively accounted for 66.36%, 69.71%,

73.17%, 69.08% and 65.84% of our revenue from operations for the six months period ended September 30, 2025 and 2024, and the Financial Years 2025, 2024 and 2023, respectively. Further, our relationships with these key customers enable access to a substantial portion of the end market.

300Set forth below is a case study in relation to one of our customers: - Airbus:

We have high client stickiness and retention due to the collaborative nature of the manufacturing that we undertake along with our OEM customers, who have very specific product requirements and stringent quality standards. Our deep understanding of OEM customers’ requirements allows us to continuously innovate and upgrade our capabilities in order to develop complex products with quick turnaround times. Extensive testing and validation processes required to fulfil very specific product requirements and stringent quality requirements by aerospace OEM customers create a significant barrier to entry for new market entrants (Source: F&S Report, see “Industry Overview”, para 8 on page 235). We also benefit from a first-mover advantage both in terms of our unique precision manufacturing and engineering capabilities and the long-standing relationships with our customers and the time invested by them in working with us to develop the requisite precision manufacturing and engineering capabilities. Global aerospace companies, such as Airbus and Boeing are focused on enhancing their supply chain efficiency and accordingly, prefer suppliers who are able to offer “one-stop-shop” capabilities to support their complex manufacturing and integration needs, due to the benefits associated with quality management, cost and working capital efficiencies (for instance, on account of reduced logistics and warehousing costs as a result of co- located facilities), reduced lead times and reduced global carbon footprint (Source: F&S Report, see “Industry Overview”, para 2 on page 235).

We continuously engage with our customers, and have periodic, pre-planned, multi-layered interactions, which help in building and deepening our relationship with them. Since our inception, we have consistently maintained strong relationship with our key customers. Further, for our key clients, we have consistently expanded the portfolio of products that we manufacture for them.

Additionally, through our presence in three continents, we are able to provide a global platform and touchpoints with capabilities to provide global solutions to customers. Our subsidiaries in the U.S. and France provide us with proximity to North American and European clients, respectively. We are one of the few companies in India in the Aerospace Segment with a presence in three continents, which enables access to skilled workforce with diverse backgrounds and expertise, apart from the closeness to the customer which helps in our long-term customer relationships (Source: F&S Report, see “Industry Overview”, para 2 on page 242).

We have been associated with Airbus since 2010 and we have also been approved as a Tier-1 supplier by our global OEM customers such as Boeing since 2017, with these approvals granted after extensive and rigorous process reviews. We have received the “Detailed Parts Partner Award (D2P)” from Airbus six times, from 2016 to 2023 and we received a Supply Chain Quality Improvement Program award in 2019 from Airbus. Airbus grants D2P status to their preferred suppliers who have consistently demonstrated high quality and reliability in meeting Airbus’ specific needs. There are around 100 D2P suppliers globally (Source: F&S Report, see “Industry Overview”, para 3 on page 249). We also received the ‘Ramp-up Champion Award’ for outstanding contribution to the Airbus ramp-up at the Global Supplier Conference 2024. We have also demonstrated a consistent pattern of clearing stringent qualification checks for our components over the years.

Founder-led business supported by an experienced management team and a qualified employee base 301We benefit from a seasoned management team with significant industry experience. Our Individual Promoter, Executive Chairman and Chief Executive Officer, Aravind Shivaputrappa Melligeri, has over 25 years of experience in the Aerospace Segment. Our Chief Financial Officer, Dinesh Venkatachalam Iyer, has been associated with our Company since January 3, 2022. Further, our Managing Director, Rajeev Kaul, who has been associated with us since April 1, 2007, has over 22 years of experience in the Aerospace Segment and is responsible for the overall operations and performance of different verticals. Additionally, our senior management team comprises Chief Technology Officer & Senior Vice President-Engineering & Quality of our Company, Dr.

Ravi Guttal, President – Aerospace of AAF, Mohamed Bouzidi, and Chief Human Resource Officer of our Company, Kapil Mahajan, whose extensive experience has helped us develop our domain expertise.

The experience and long tenure of our Key Managerial Personnel provides us with stability and deep institutional knowledge, allowing us to grow our business effectively and maintain customer relationships. We also rely on the knowledge and experience of our Board of Directors, which comprises individuals with diverse industry backgrounds, including Eberhard Klaus Richter, Ajay Aravind Prabhu, Rajeev Kaul, Vidya Sarathy and Anup Wadhawan.

Further, we are supported by a dedicated and tenured pool of employees. We believe that our employees have been key to our successes thus far. We regularly provide training to all our employees to ensure the quality of our products delivered to customers. We are also backed by our investors, Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II, Amansa Investments Ltd, Steadview Capital Mauritius Limited, Catamaran Ekam (acting through its trustee Catamaran Advisors LLP), Sparta Group LLC, SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term and Think India Opportunities Master Fund LP which collectively hold 25.05% of our issued, subscribed and paid-up pre-Offer Equity Share capital.

OUR STRATEGIES Continue to increase wallet share with our existing customers in the Aerospace Segment by moving up the manufacturing value chain and diversify our customer base in the Aerospace Segment We have scaled the volume of products sold to our customers in the Aerospace Segment in the past. Going forward, as a part of our growth strategy, we aim to increase wallet share from existing customers in Aerospace

Segment through the following initiatives: • moving up the value chain and increasing the manufacture of more critical and complex parts in the Aerospace Segment, such as engine and landing systems. We aim to increase our manufacturing of existing complex engine and landing systems, and also venture into the production of new engine and landing systems such as torque tube, engine nacelles and blades;

• leveraging credibility/trust with existing customers to increase amount of value addition across customers’ platform going forward. As a D2P partner for Airbus, we have access to a pool of contracts which they roll out for various manufacturing and assembly programs, thereby providing us with a competitive advantage over non-D2P partners for Airbus in securing such contracts. Further, our management team regularly engages with our existing customers to better understand their business needs in order to explore potential opportunities to increase supply of products to them. We also participate in D2P and customer conferences and network with customers during airshows; and • entering into long-term master service agreements (“MSAs”) with our clients setting out the broad terms governing our relationship with them and obtaining work orders for each subsequent service, setting out commercial terms.

We plan to execute this strategy by increasing the utilization of available capacity at our existing facilities and by strengthening and localizing our supply chain in India. As part of this approach, we intend to selectively engage sub-contractors for lower value-added activities within the supply chain ecosystem. This will enable us to allocate internal resources and manufacturing capacity toward higher value-added and more complex components, thereby moving up the value chain. These efforts will also support our ability to remain competitive and provide comprehensive, end-to-end solutions to our customers.

In addition, we also aim to leverage our existing aerospace manufacturing capabilities to diversify customer base in Aerospace Segment by pursuing opportunities to develop new relationships and strengthening our presence in Aerospace Segment.

302Grow our portfolio of consumer products While we primarily operate in the Aerospace Segment, over the years, we have expanded our product portfolio to include consumer electronics, plastics, and consumer durables for our consumer clients.

Consumer electronics products We aim to further diversify our business by expanding our portfolio of consumer electronics products. We have started manufacturing and have commenced mass production shipments of components for portable computers from July 31, 2025 and we intend to manufacture and commence mass production shipments of components for smart devices, targeting integration into the supply chain of a company that is among the largest global consumer electronics players by revenue in Financial Year 2024 (Source: F&S Report, see “Industry Overview”, para 1 on page 262). We intend to strengthen our relationship with OEMs in the consumer electronics sector to scale manufacturing of existing products, related components such as portable computer and smart devices, and other components for wearables and electronics devices. We have invested and intend to continue to invest in our consumer electronics business. We have invested ₹2,024.99 million, ₹1,473.60 million and ₹186.66 million for the Financial Years 2025, 2024 and 2023 respectively, towards the development of our consumer business in our units in the Hubballi Manufacturing Cluster, in particular towards investment in plant and machinery for our consumer electronics business. As of September 30, 2025, we had 70,763 machining hours of capacity in our units in the Hubballi Manufacturing Cluster, and we had 299,957 square feet of manufacturing space available to support our strategic objectives within the consumer electronics and consumer durables sector. We intend to leverage our advanced manufacturing capabilities in the Aerospace Segment to further develop and enhance our manufacturing capabilities in the consumer electronics business, which will increase our customer base and wallet share in our consumer electronics business.

Increase in consumer product portfolio We intend to leverage our existing expertise in precision machining and establish similar long-term engagements with other OEMs to increase our market share and expand our portfolio in the Consumer Segment.

Joint venture capabilities Further, we also aim to deepen our relationship with global consumer durable goods companies. In this regard we have ventured into products such as cookware and non-stick pans. We entered into a joint venture with Tramontina in June 2024 to supply non-stick pans to them, and we expect to be their key supplier for non-stick pans going forward. In order to further grow our portfolio of consumer durables products, we are currently exploring other collaboration opportunities with Tramontina, including in relation to manufacture of aluminium non-stick and ceramic coating cookware, triply cookware and triply cooker, kitchenware and houseware including cookware, bakeware utensils, cutlery and cutting boards.

Improve our margins through higher value manufacturing and measures for operational efficiencies Going forward, we aim to improve our margins through the following initiatives: • increasing generation of revenues from the Consumer Segment while maintaining a stable cost base, thereby allowing us to benefit from operating leverage;

• increasing efficiency and improving our asset and capacity utilization across all our segments; • pursuing opportunities for evaluating potential targets for unidentified acquisitions and/or strategic initiatives and partnerships, that complement our business operations, strengthen or establish our presence in targeted markets;

• as part of our business restructuring, for generation of business synergies and operational efficiencies, we may continue to explore options to merge, consolidate or wind-up some of our Indian and overseas entities, subject to compliance with applicable laws and receipt of necessary approvals, in their respective jurisdictions;

• in relation to the Aerospace Segment, we endeavour to diversify our product portfolio mix and focus on higher value-added products such as engine, actuation, landing gear components and highly complex structural components, which we expect will support improved realizations, reflecting the higher complexity of our offerings, and contribute to enhancements in profitability and margins; and 303• in relation to the Consumer Segment, we aim to enhance operational efficiencies by increasing our procurement of raw materials from domestic suppliers, thereby reducing dependence on international sources. This shift is expected to lower raw material costs and improve our margins. We also plan to increase the proportion of consumer electronics products in our portfolio, as consumer electronic products typically offer higher margins as compared to other categories within the Consumer Segment.

Additionally, we intend to enter into high-precision consumer products space, such as portable computers, and smart devices, which require titanium-based machining capabilities. These products can command a price premium due to the complexity involved. Furthermore, we intend to leverage government incentive programs such as the PLI Scheme and the Scheme for Promotion of Electronic Components and Semiconductors, in alignment with the Government of India’s broader push to promote local manufacturing in India.

Leverage our existing capabilities to increase our market share in capability and sector adjacencies We aim to leverage the existing ecosystems and our manufacturing capabilities to expand our market share in related precision-driven sectors among others, which are expected to be growing sectors in India, particularly considering the Government of India’s push towards local manufacturing in India (Source: F&S Report, see “Industry Overview”, para 3 on page 250). We plan to expand our capabilities through strategic investments, acquisitions, joint ventures and partnerships.

We have developed advanced engineering and machining capabilities in our Aerospace Segment which can be replicated across related precision-driven sectors, and intend to leverage these capabilities to enter into these sectors and increase our market share with global OEMs. We have started manufacturing and have commenced mass production shipments of components for portable computers from July 31, 2025 and we intend to manufacture and commence mass production shipments of components for smart devices, targeting integration into the supply chain of a company that is among the largest global consumer electronics players by revenue in Financial Year 2024 (Source: F&S Report, see “Industry Overview”, para 1 on page 252). We continuously explore such opportunities and engage with global OEMs on an ongoing basis, to leverage our existing capabilities to increase our market share in related precision-driven sectors. Accordingly, we have a significant market opportunity, driven by favorable industry trends, our unique approach to manufacturing through the manufacturing ecosystems and our diversified business model and product portfolio which enables us to generate growth and profitability and enhance our operational efficiency (Source: F&S Report, see “Industry Overview”, para 3 on page 275). The Indian precision engineering component market will grow from ₹2,992.92 billion in 2024 to ₹4,946.96 billion in Financial Year 2030 with a CAGR of 8.74% (Source: F&S Report, see “Industry Overview”, para 2 on page 267).

Description of Our Business Product Portfolio We have a diversified range of product offerings across the Aerospace Segment and Consumer Segment. Our product portfolio comprises over 5,000 distinct products across engine systems, landing systems, cargo and interiors, structures, assemblies and turning for our aerospace clients; and consumer electronics, plastics and consumer durables for our consumer clients. As on September 30, 2025, the number of SKUs for the Aerospace

Segment and Consumer Segment include the following:

Business Key Products Supplied Number of Verticals/Product SKUs Lines Aerospace Structures Bracket, corner fitting, cable quadrant, triangular bracket, wing flap support, 4,093 coupling, gearbox bracket, floorboard, latch assembly, bracket structure Interiors and cargo Power distribution unit tray, side panel, pawls, base, pan-seat, beam-back support, 670 panel-side top, seat stay, outer pawl, housing left, bracket offset Landing systems Main landing gear, main fitting, bracket assembly, front panel, front assembly uplock, 124 rim, half wheel, main fitting assembly Actuation Systems Housing, manifold, mounting foot, mounting flange, actuator piston, housing, jack 79 head, radarbox Engine systems Front spinner, seal rotating bearing, fan disk, cone sub-shaft, shroud, pylon rib, rotating 39 spacer, fuel injection rail Turnings Cover (compressor), fitting, shear plate, coupling, bushings 17 Assemblies Structure (Emergency exit panel), non-operable door panel, outflow valve door, 4 304Business Key Products Supplied Number of Verticals/Product SKUs Lines retainer (seal), handle, machining (frame), front panel, racks Consumer Consumer electronics Components for portable computers and smart devices N/A* Plastics Outdoor games/darts, toy vehicles, figures, dolls, role play toys and STEM toys N/A* Consumer durables Non-stick cookware and small home appliances N/A* *The number of SKUs for consumer products are indicated as N/A because we do not track the number of SKUs for our consumer product lines, as products supplied under our consumer vertical is largely project-specific whereby each project entails a variety of different products.

Aerospace We develop and manufacture products within the Aerospace Segment, including engine systems, landing systems, cargo and interiors, structures, assemblies, turning and actuation systems. Certain key products supplied under

each product line are described below:

Structures We develop and manufacture components in structures such as bracket, corner fitting, cable quadrant, triangular bracket, wing flap support, coupling, gearbox bracket, floorboard, latch assembly, bracket structure. The bracket is used in the fuselage structure of the aircrafts and the corner fitting product is a key wing structure component in the aircraft which attaches wing and fuselage.

Interiors and cargo We develop and manufacture components in the interiors and cargo such as power distribution unit tray, side panel, pawls, base, pan-seat, beam-back support, panel-side top, seat stay, outer pawl, housing left, bracket offset.

The power distribution unit tray is a component used in the deck for movement of cargo containers within the aircraft.

Engine systems We develop and manufacture components in the engine systems such as front spinner, seal rotating bearing, fan disk, cone sub-shaft, shroud, pylon rib, rotating spacer, fuel injection rail. The front spinner is a component mounted on the front of the turbine blade assembly of Leading-Edge Aviation Propulsion (“LEAP”) engine. It is a rotating component of engine with precise balance requirement. Further, the seal (rotating bearing) is a static part in the LEAP engine that encompasses the rotating bearing.

305Landing systems We develop and manufacture components in the landing systems such as the main landing gear, main fitting, bracket assembly, front panel, front assembly uplock, rim, half wheel. The torque tube assembly is a component working in the braking system of the landing gear of an aircraft and the main fitting assembly is an integral component within the hydraulic systems of the landing gear assembly of an aircraft.

Turnings We develop and manufacture turnings such as cover (compressor), fitting, shear plate and coupling. We manufacture complex turn-mill components, such as rotating-bearing seals for the LEAP-1A and LEAP-1B engines.

Assemblies We develop and manufacture components in assemblies such as structure (emergency exit panel), non-operable door panel, outflow valve door, retainer (seal), handle, machining (frame) front panel, racks. The structure (emergency exit panel) is part of the window skeleton, used in assembly of over wing exit assembly. The retainer

(seal) is used in the assembly of over wing exit door. The handle (of the door) is used in assembly of over wing exit door. The machining (frame) is made from cast titanium and forms a frame for service door.

Actuation systems We develop and manufacture components for the actuation systems such as housing, manifold, mounting foot, mounting flange, actuator piston, housing, jack head, radar box. The housing and manifold products are parts used in aircraft actuation system to control flap and aileron and are pressure tested for leakages before dispatch.

Consumer We develop and manufacture consumer products, including consumer electronics and plastics, and consumer durables, as detailed below:

Consumer electronics Since August 2022, we started developing consumer electronics components such as components for portable computers and smart devices.

Plastics We manufacture plastic products such as outdoor games/darts, toy vehicles, figures, dolls, role play toys and STEM toys, which we commenced in 2016. We manufacture our plastic products with polymers such as acrylonitrile butadiene styrene, polyvinyl chloride and polypropylene. Further, our dolls and figures are suitable for children aged three years and above to help with imaginative play for pre-schoolers and young children.

Consumer durables We manufacture consumer durable goods such as non-stick cookware. We commenced manufacturing of consumer durable goods in January 2021.

Manufacturing Process 306A flowchart describing the manufacturing process of our Aerospace Segment products is set out below:

A flowchart describing the manufacturing process of our Consumer Segment products is set out below:

Plastics Consumer Electronics 307Consumer Durables Business Verticals and Capabilities Our business verticals consist of Aerospace Segment and Consumer Segment. We have developed a wide range of capabilities across each of our business verticals, as set out below:

Business Verticals Key Capabilities Aerospace Forging, precision machining, surface treatment, aerostructure assemblies, metal press forming, heat treatment Consumer Machining, molding, tooling, assemblies, painting and printing, tool room, metal press forming, advance surface engineering including secondary processes, thermoplastic molding and non- stick coatings Aerospace Forging In 2011, we entered into a joint venture to form SQuAD. SQuAD specializes in forging small to medium-sized aero-structural parts for engines, landing gear and braking system components in aluminium, steel, titanium or nickel-based alloys. These components are manufactured using the closed-die hot forging method with materials such as aluminium, steel, titanium, and nickel-based alloys. SQuAD has capabilities to forge highly critical components for the automotive, power generation and oil & gas industries, among others.

Further, SQuAD is equipped with separate forging lines of 1,200 ton screw press, a 10,000 ton hydraulic press and other associated lines for heat treatment. SQuAD also has an inspection line, a well-equipped laboratory and an in-house non-destructive testing facility. SQuAD’s facilities are ISO 9001, AS 9100, ISO 14001 and OHSAS 18001 certified, and its heat treatment lines are National Aerospace and Defense Contractors Accreditation Program (NADCAP) certified.

Precision machining We engage in high precision detail part manufacturing of products within the Aerospace Segment from steel, titanium, aluminium, among others. The aerospace manufacturing ecosystem in Belagavi, Karnataka hosts one of the largest precision machining capacities in India, at over 2.92 million machining/molding hours (annual installed capacity) per year (Source: F&S Report, see “Industry Overview”, para 2 on page 236). Our precision machining facilities are equipped with 3-axis, 4-axis and 5-axis CNC machines with high feed rates and spindle speeds up to 25,000 RPM for machining complex actuation parts from steel, titanium and aluminium solid bars and thin-walled castings. Our precision machining capabilities allow us to produce components which adhere to stringent geometrical and dimensional specifications. Further, our precision machining facilities are equipped with inspection capabilities using coordinate measuring machine and a wide variety of calibrated gauges.

Our machining process begins with the planning of raw materials, machines, and cutting tools required for machining. Stage-wise machining setups are planned, and a process flow is defined. Our precision machining facilities feature state-of-the-art 3-axis, 4-axis and 5-axis CNC machines capable of handling complex actuation, structural, interior cargo, engine systems, landing gear, and actuation systems. These components are made from aluminum and exotic materials, including billets, forgings, and castings, while meeting stringent geometrical and dimensional specifications.

308Surface treatment The surface treatment process is one of the most critical steps in ensuring the quality, safety, and precision of products within the Aerospace Segment. This process provides a physical shield to protect parts against corrosion and moisture. The parts undergo surface defect inspection through Non-Destructive Testing (“NDT”) before being subjected to anodizing, passivation, and subsequent primer-paint application.

API is a joint venture which we entered into with Magellan Aerospace Limited, Canada in 2007 to provide innovative surface treatment solutions that are not readily available in India. API has NADCAP accreditation for chemical processing, surface enhancement and non-destructive testing, all of which are critical capabilities across the aerospace industry (Source: F&S Report, see “Industry Overview”, para 2 on page 236). API is AS 9100 Rev D and ISO 14001-2004 and BS OHSAS 18001:2007 certified. API’s other surface treatment capabilities include cadmium plating, robotic shot peening, aluminium and titanium etching, prime, paint, part marking, passivation and salt spray, among others.

Aerostructure assemblies With respect of aero assemblies, we assemble non-operable door panels and structure (emergency exit panel) at our facility in Belagavi, Karnataka. We assemble aerostructures for wing and fuselage, and assemble tools for fixtures and jigs. AAI delivers Build-to-Print (“BTP”) assembly solutions for the aerospace industry. The process involves planning standard items, sealants, tools, and trained resources required for execution, followed by defining the stage-wise assembly flow. AAI holds key certifications, including GRAMS, AS9100, and OHSAS.

Consumer Dart manufacturing A dart assembly machine is a high-speed, automated system designed for assembling dart tip, stem and foam. It enables large-scale production with minimal downtime, handling thousands of units per hour. Its advanced robotics and modular design enhance productivity, which make it ideal for industries requiring mass assembly with strict quality control.

Plastics Injection and blow molding Injection molding is a high-capacity production process ideal for mass manufacturing. It enables rapid, precise, and consistent production of plastic parts with minimal waste. Multi-cavity molds and automation allow for large- scale output, making it cost-effective for industries requiring millions of identical components with quality and efficiency standards.

Blow molding is a high-volume manufacturing process used to produce hollow plastic products like bottles and containers. It offers fast production cycles, minimal material waste, and scalability for mass production. With automation and single cavity molds, it efficiently produces millions of uniform parts, making it cost-effective for large-scale industries.

Our integrated molding facility equips us with capabilities to mold parts with a variety of polymers, including acrylonitrile butadiene styrene (ABS), high density poly ethylene (HDPE) and polyphenylene ether (PPE) polymers, to produce a variety of toys. As of September 30, 2025, we have 161 molding machines with capabilities for injection molding as well as blow molding. The range of our injection molding capacity is 86T to 450T, while the range of our blow molding capacity is between 1L to 15L. We are also equipped with three robotics-enabled molding machine.

Decoration Toy decoration is an important post-molding process in toy manufacturing that enhances the visual appeal, brand identity, and play value of toys. It involves the application of colors, patterns, logos, and fine details onto the surface of plastic or metal components using various techniques such as spray painting, pad printing, hot stamping, and labelling. These processes are also tailored to meet specific market and consumer requirements, particularly in character-based or themed toys. Effective decoration requires precise surface preparation, the appropriate selection of inks or coatings, and the use of specialized machinery to ensure consistency, durability, and safety, especially in compliance with toy safety standards.

309Assemblies We utilize automation and specific layouts to increase output for our assembly lines. As of September 30, 2025, we have 40 assembly lines to accommodate fluctuating demands in toys, particularly during peak seasons. Our assembly lines are equipped with capabilities including ultrasonic welding, glue automation, blister card sealing and automatic screwing, among others. We also have an item counter to measure end of time shifts easily.

Consumer Electronics Initial stages We refer to the initial phase of the project as the foundational phase, which centers on establishing a manufacturing ecosystem to ensure readiness and operational efficiency. The initial activities are structured as follows: (i) process definition – this involves establishing a comprehensive manufacturing process and a detailed component process flow to guide production; (ii) resource identification – this focuses on determining the necessary raw materials, consumables, bought-out parts, and elementary components critical for manufacturing;(iii) infrastructure planning – this encompasses identifying essential equipment, tools, fixtures, and associated consumables vital for executing the manufacturing operations; (iv) capital procurement – this includes initiating the procurement process for required capital expenditure items essential for production readiness; and (v) commissioning and qualification – this pertains to overseeing the receipt, installation, and commissioning of equipment, followed by systematic qualification to ensure operational accuracy and compliance. This structured approach enables a seamless transition from planning to production, laying the groundwork for timely project execution and long-term manufacturing efficiency.

Machining, ultrasonic, cleaning and blasting We perform precision material removal through advanced CNC machining, enabling us to shape components precisely in accordance with design specifications. Depending on the geometry of the component, our machining processes may involve turning, milling, and drilling operations to ensure dimensional accuracy and repeatability.

Following machining, we undertake ultrasonic cleaning, an important post-machining step, in which high- frequency sound waves in a cleaning medium dislodge residues such as cutting oils, loose burrs, and suspended particulates. This step ensures cleanliness, part integrity, and prepares the components for subsequent finishing or assembly. To relieve stresses induced during machining and to prepare surfaces, we conduct controlled abrasive blasting. This process homogenizes surface finishes and imparts a uniform texture or gloss, as required by the application, enhancing both mechanical reliability and aesthetic appeal. Together, these integrated operations establish a production chain aimed at precision, quality assurance, and performance durability, essential across sectors including automotive, aerospace, and industrial equipment.

Anodizing, laser etching and assembly/packing We perform anodizing as a controlled electrochemical process that enhances the corrosion resistance and surface hardness of metal components by forming a protective oxide layer. This process supports longer product life, particularly under challenging environmental conditions. Following anodizing, we carry out laser marking on

anodized surfaces with high precision for two main purposes: (i) to expose conductive areas required for electrical contact, and (ii) to permanently mark components with identifiers such as serial numbers, codes, or process identification details, which aid in traceability and quality control throughout subsequent operations. Our assembly phase involves the integration of machined parts with both elementary and externally sourced components to form the finished product. This phase may involve mechanical fastening, adhesive bonding, or functional sub- assemblies depending on the design requirements. In the final stage, we conduct packaging to protect the product’s form and function. Individual parts are protected against cosmetic damage using wraps or trays, and packed boxes are stacked on pallets and loaded into containers to facilitate efficient logistics and safe transportation.

Consumer Durables Pressing and polishing Presses, primarily hydraulic or mechanical, are used to shape aluminium and metal sheets into various forms such as pots and pans. We utilize pressing machines specifically designed for aluminium cookware, including those used for impact bonding of induction cladding plates. Following the pressing operation, the pots and pans are transferred to an automated cleaning system designed to handle large volumes in a continuous process. We have cleaning machines in place to ensure that all residues, including oil content, are effectively removed from the cookware.

310Welding and coating We apply coatings to both the interior and exterior surfaces of the pots and pans we manufacture. For the interiors, we typically use either polytetrafluoroethylene (PTFE) or ceramic coatings. PTFE is our preferred choice when non-stick performance and long-lasting durability are required, making it one of the most widely used options in cookware. Alternatively, we use ceramic coatings as a more environmentally friendly option, offering good heat resistance and adequate non-stick properties. For the exterior, we apply a high-temperature resistant coating. This is specifically formulated to protect the outer surface of the cookware that may come into direct contact with flame, enhancing thermal resistance and helping to prevent damage from high-temperature exposure.

Shot blasting, riveting, assembly and packing Prior to applying internal coatings, we carry out shot blasting on pots and pans to prepare the internal surface. Our assembly process includes trimming, handle attachment through either spot welding or riveting, laser marking of the customer brand, and retail packaging.

Painting and printing Digital ink jet printing Digital inkjet printing is a high-speed, on-demand printing technology ideal for variable data and short-to-medium production runs. It enables precise, full-colour printing on various materials without plates or screens. With fast setup and minimal waste, it supports mass customization and scalable production toys manufacturing.

Manual spray printing Manual spray painting in toy production allows for high-quality, detailed finishes with flexibility in design and customization. It enables small to medium production runs with skilled craftsmanship, ensuring precision and vibrant colours. This process is ideal for unique type toys, maintaining quality while adapting to specific artistic requirements.

Tampo/pad printing Pad printing in toy production is a highly efficient and precise method for applying detailed designs, logos, and patterns. It enables high-speed, consistent printing on regular and irregular surfaces, making it ideal for mass production. With multi-colour capabilities and fast cycle times, pad printing ensures vibrant, durable graphics with excellent scalability.

We have developed extensive painting and printing capabilities to cater to the decorative requirements of the toy industry. For pad printing, we have dedicated controlled areas with 75 machines, as of September 30, 2025. For spray painting, we have 40 semi-automatic machines and 160 manual painting booths, as of September 30, 2025.

We also have five digital printing machines to facilitate quicker turnaround times and better throughput.

Tool room We have a dedicated tool room for tool repair and maintenance. As of September 30, 2025, we have over 1,000 molds for tools, reflecting our extensive capability for tooling.

Our Customers Since the commencement of our operations, we have cultivated long standing relationships with our customers, including prominent multinational OEMs such as Airbus, Collins Aerospace, Eaton, GKN Aerospace, Safran, Spirit Aerosystems Inc., Boeing, Hasbro, Tramontina, SpinMaster, Wonderchef, among others. As of September 30, 2025, we service a total of 15 OEMs customer groups globally.

The table below sets out certain details relating to our key customer groups, in terms of years of association:

Name of Customer Group Business Vertical Number of Years of Association* Airbus Aerospace 15 Safran Aerospace 9 Boeing Aerospace 8 Hasbro Consumer 9 311Name of Customer Group Business Vertical Number of Years of Association* SpinMaster Consumer 7 Wonderchef Consumer 5 Consumer electronics company which is among the largest consumer Consumer 3 electronics companies in the world by revenue for Financial Year 2024 (Source: F&S Report, see “Industry Overview”, para 1 on page 252) Tramontina Consumer 1 *Refers to the number of years since entering into the first contract with the customer.

In addition to the above, Honeywell Inc. has been a customer of our Company, and our Company has been providing services to Honeywell’s aerospace business from 2015 onwards. SAAB has been a customer of Aerostructures Assemblies India Private Limited, and the company has been providing services to SAAB since

2013.

In recognition of our workmanship, we have received several awards from our customers over the years, such as Airbus. For details, see “– Awards” on page 322 below.

We sell our products to OEMs in India and certain countries overseas, including in the U.S., France, Germany, Hong Kong and Sweden. The table below sets forth our revenue from operations for the periods/years indicated:

Particulars For the six months period ended September 30, 2025 2024 Amount (in ₹ % of revenue Amount (in ₹ % of revenue million) from operations million) from operations India 614.85 11.44 577.01 12.57 United States of America 1,312.85 24.45 1,119.05 24.38 France 1,312.54 24.44 891.12 19.42 Hong Kong 499.69 9.30 410.39 8.94 Sweden 282.23 5.26 451.96 9.85 United Kingdom 744.60 13.87 504.29 10.99 Germany 317.29 5.91 381.14 8.30 Others 287.54 5.34 254.77 5.55 Total revenue from operations 5,371.59 100.00 4,589.73 100.00 Particulars Financial Year 2025 Financial Year 2024 Financial Year 2023 Amount (in ₹ % of Amount (in ₹ % of Amount (in ₹ % of million) revenue from million) revenue from million) revenue from operations operations operations India 985.96 10.74 1,223.10 12.67 947.63 11.67 United States of America 2,130.92 23.02 1,862.50 19.30 1,644.47 20.25 France 2,044.82 22.11 1,709.75 17.72 1,517.34 18.68 Hong Kong 622.14 6.72 1,606.45 16.65 977.88 12.04 Sweden 904.57 9.77 1,044.50 10.82 648.76 7.99 United Kingdom 817.64 8.83 679.44 7.04 812.52 10.00 Germany 1,135.12 12.28 993.99 10.30 797.82 9.82 Others 604.89 6.53 531.01 5.50 774.90 9.55 Total revenue from operations 9,246.05 100.00 9,650.74 100.00 8,121.32 100.00

Note: Includes direct sales to customers and indirect sales through vendors to end customers For details, see “Risk Factors – A significant portion of our revenue from operations is derived from direct and indirect exports, with only 11.44%, 12.57%, 10.74%, 12.67% and 11.67% of our revenue from operations being derived from sales within India during six months period ended September 30, 2025 and 2024, and the Financial Years 2025, 2024 and 2023, respectively. Further, our international business exposes us to complex management, legal, tax and economic risks, which could adversely affect our business, results of operations, financial condition and cash flows.” on page 53.

Manufacturing Clusters and Facilities Currently, we operate units in three manufacturing clusters in India, and two manufacturing facilities in France and the U.S., the details of which are set out as follows:

312The table below sets forth certain details with respect to manufacturing clusters that we operate in and facilities, as certified by the independent chartered engineer, Vishvakarma Consultancy Services Private Limited in their certificate dated November 16, 2025:

Facility Entity Location Products Property Area (in Sq. Key equipment used Key raw Term Certifications Year of manufactured Description feet) materials obtained from commissioning (owned/ used government or acquisition leased) regulatory agencies Belagavi • Aerospace Belagavi Aerostructures, Leased 1,231,721 3-Axis, 4-Axis, 5-Axis Aluminum, • API (Unit-I) - ISO 2009 Manufacturing Processing India assemblies, CNC Machines, 10KT Titanium, 99 Years from 45001:14001 Cluster Private Limited Turning, outdoor Hydraulic Closed Die Steel, 20-Dec-2008

(API) toys Press Inconel • API (Building • Aerostructures 2) - 10 Years Assemblies India from 1-Jul- Private Limited 2019

(AAIPL) • API (Unit-II) – • Aequs 10 Years from Engineered 26-Aug-2022 Plastics Private • API - 99 Years Limited from 4-Mar-

(AEPPL) 2014 • Aequs Force • AAI - 15 Years Consumer from 3-Dec- Products Private 2013 Limited • AEPPL - 10

(AFCPPL) Years from 15- • Aequs Limited Jul-2018 • AeroStructures • AEPPL Manufacturing (Warehouse) - India Private 20-Sep-2022 to Limited 30-Apr-2029 (6

(ASMIPL) Years 7 Months • SQuAD Forging and 10 Days) India Private • AFCPPL - 10 Limited Years from 1-

(SQuAD) Jun-2019 • AFCPPL (Unit- II) - 20-Sep- 2022 to 30- Apr-2029 (6 Years 7 Months and 10 Days) 313Facility Entity Location Products Property Area (in Sq. Key equipment used Key raw Term Certifications Year of manufactured Description feet) materials obtained from commissioning (owned/ used government or acquisition leased) regulatory agencies • Aequs Limited (Unit-II) - 10 Years from 14- Mar-2023 • Aequs Limited (Unit-IV) – now merged with Aequs Limited Unit-II - 10 Years from 1-Apr-2018 • ASMIPL (Unit- I) - 10 Years from 28-Mar- 2023 • ASMIPL (Unit- II) - 10 Years from 1-Jan- 2018 • ASMIPL (Unit- III) – 10 Years from 1-Apr- 2018 • SQuAD - 99 Years from 19- Nov-2011 Hubballi • Aequs Consumer Hubballi Electronic Leased 299,957 4.5 Axis CNC Machine Aluminum 10 Years from 28- ISO 9001:2015 2021 Manufacturing Products Limited components, and its Sep-2022 Cluster • Aequs Cookware Non-stick alloy, Private Limited cookware recycled aluminum, Titanium Koppal • Aequs Toys Koppal Outdoor toys, Leased 554,138 Molding Machine, CNC Plastics, • ATPL – DTA - ISO 9001:2015 2021 Manufacturing Private Limited basic dolls, Machine ABS, PP, 10 Years from Cluster (ATPL) vehicles POM, PVC 15-Aug-2022 • Koppal Toys • ATPL – SEZ - Molding COE 10 Years from 314Facility Entity Location Products Property Area (in Sq. Key equipment used Key raw Term Certifications Year of manufactured Description feet) materials obtained from commissioning (owned/ used government or acquisition leased) regulatory agencies Private Limited 9-Aug-2022

(KTMCPL) • KTMCPL - 10 • Aequs Rajas Years from 1- Extrusion Private Aug-2022 Limited • AREPL - 10

(AREPL) Years from 9- Sep-2022 Cholet Facility Aequs Aerospace France Rotating Spacer, Leased 82,882 Turning/Milling Aluminium, December 31, ISO 9001 2016 France SAS Fuel Injection Titanium, 2031 EN 9100 Rail, Turn Mill, Inconel Main Landing Gear, Front Panel Texas Facility Aequs Aero Texas (USA) Coupling, Leased 32,400 3-Axis, 4-Axis and 5- Aluminium, June 30, 2033 - 2015 Machine, Inc. Gearbox Bracket, Axis CNC Milling Titanium, Floorboard, Machines (Both Inconel Latch Assembly, Horizontal and Vertical);

Bracket Coupling Lathe;

315The tables below set our capacity utilization rate across our manufacturing facilities for the six months period ended September 30, 2025 and 2024, and the Financial Years 2025, 2024 and 2023, as certified by the independent chartered engineers, Vishvakarma Consultancy Services Private Limited in their certificate dated November 16, 2025:

Segment For the six months period ended September 30, 2025 For the six months period ended September 30, 2024 Installed Capacity (in Actual Production (in Capacity Utilization (%) Annual Installed Actual Production (in Capacity Utilization (%) machining/ molding machining/ molding Capacity (in machining/ machining/ molding hours) hours) molding hours) hours) Aerospace (India)* 740,944 489,025 66.00% 709,825 469,482 66.14% Aerospace (France)1 80,712 19,938 24.70% 77,112 20,119 26.09% Aerospace (USA)2 68,640 9,852 14.35% 68,112 10,851 15.93% Consumer (India) 3 566,888 116,884 20.62% 510,525 106,798 20.92% Segment Financial Year 2025 Financial Year 2024 Financial Year 2023 Installed Actual Capacity Annual Actual Capacity Annual Actual Capacity Capacity (in Production (in Utilization (%) Installed Production (in Utilization (%) Installed Production (in Utilization (%) machining/ machining/ Capacity (in machining/ Capacity (in machining/ molding hours) molding hours) machining/ molding hours) machining/ molding hours) molding hours) molding hours) Aerospace 1,431,232 952,179 66.53% 1,374,015 845,404 61.53% 1,347,204 720,803 53.50%

(India)* Aerospace 152,958 42,694 27.92% 152,958 39,523 25.84% 161,424 33,053 20.48%

(France)1 Aerospace 135,168 19,561 14.47% 136,224 21,601 15.86% 135,696 22,430 16.53%

(USA)2 Consumer 1,199,700 204,825 17.07% 1,204,988 367,021 30.46% 1,155,412 320,824 27.77%

(India)3 * Aerospace (India) includes AeroStructure Manufacturing India Private Limited, one unit in Aequs Limited (standalone), AeroStructures Assemblies India Private Limited, Aerospace Processing India Private Limited, SQuAD Forging India Private Limited – all facilities at Belagavi, Karnataka 1 Aerospace (France) includes Aequs Aerospace France SAS in Cholet, France 2 Aerospace (USA) includes Aequs Aero Machine Inc., in Paris, Texas, USA 3 Consumer (India) includes Aequs Consumer Products Private Limited and Aequs Cookware Private Limited in Hubballi, Karnataka, Aequs Engineered Plastics Private Limited and Aequs Force Consumer Products Private Limited in Belagavi, Karanataka, Aequs Toys Private Limited and Koppal Toys Molding COE Private Limited in Koppal, Karnataka

Notes:

Annual Installed Capacity has been calculated assuming 8 days of closure of plant and 3 days of closure for planned preventive maintenance Annual Installed Capacity has been calculated assuming 22 working days in a month 316Raw Materials and Suppliers We use a wide range of raw materials in our manufacturing processes, primarily including:

• Aluminium; • Steel; and • Titanium.

The table below sets out our cost of raw materials consumed, in amounts and as a percentage of total expenses:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Cost of materials consumed (₹ in million) 2,328.94 2,285.19 4,082.60 4,390.72 4,168.95 Cost of materials consumed, as a percentage of total 48.37 54.71 47.96 52.10 53.62 expenses (%) We directly procure our raw materials from suppliers located in India and outside India. We maintain a diversified supplier base, and we do not rely on a limited number of suppliers for the supply of our raw materials. The table

below sets out our cost of materials sourced from suppliers located in India and outside India:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Cost of materials sourced from suppliers located in 1,081.59 1,346.75 2,222.05 2,312.78 2,683.19 India (₹ in million) Cost of materials sourced from suppliers located in 45.27 50.69 49.88 49.75 56.79 India, as a percentage of total cost of materials sourced (%) Cost of materials sourced from suppliers located outside 1,307.68 1,309.97 2,232.85 2,336.07 2,041.56 India* (₹ in million) Cost of materials sourced from suppliers located outside 54.73 49.31 50.12 50.25 43.21 India*, as a percentage of total cost of materials sourced (%) *Including China, Germany, France, the United States of America, United Kingdom, Taiwan and South Korea.

We typically select our suppliers based on a variety of factors, including customer preference and our internal assessment of suppliers. Our customers typically provide us with a list of preferred raw materials suppliers, which we use to further filter and select our suppliers based on our own internal assessment of such suppliers by benchmarking their product quality, pricing, timing of delivery, among others. For details, see “Risk Factors – Our business is subject to fluctuations in the prices and disruptions in the availability of raw materials, which may have an adverse effect on our business, results of operations, financial condition and cash flows” on page

41.

The table below sets forth details relating to our suppliers for the periods/years indicated:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Number of suppliers engaged 632 676 892 731 751 Total value of goods purchased from ten largest suppliers 967.20 1,145.20 1,789.75 2,191.30 2,090.92 by amounts incurred (₹ in million) Total value of goods purchased from ten largest 40.48 43.11 40.17 47.14 44.25 suppliers by amounts incurred, as a percentage of total purchases (%) Engineering We leverage our engineering capabilities to manufacture products and engineering solutions for OEMs. Our engineering expertise allows us to develop fully manufactured products, starting from fundamental principles.

317This includes a wide range of products such as functional and structural products within the Aerospace Segment (e.g., interior cargo, engine systems, landing gear, and actuation systems), consumer products (e.g., toys, and cookware), and components for portable computers and smart devices, among others.

In our Aerospace Segment, we receive technical specifications from our customers, including aircraft utility, dimensions, and expected performance characteristics, such as safety and durability. Our engineering and new product development teams simulate and industrialize products based on these customer inputs. As of September 30, 2025, our engineering and new product development team includes over 300 professionals, including process, testing, and tool engineers. We also utilize advanced quality assurance tools and methods to ensure the quality and reliability of our aerospace products, ensuring they meet customer requirements.

In our Consumer Segment, we receive a diverse range of inputs from our customers, ranging from initial concepts to detailed technical drawings. Once the product design inputs are received, our manufacturing and process engineering teams develop methods to industrialize the product using our manufacturing processes. Our industrial engineering teams focus on delivering quality, reliability, cost efficiency, and streamlined production. As of September 30, 2025, we employ over 300 engineers across product design, manufacturing, and industrial engineering functions.

As a platform for custom manufacturing based on specific client requirements and needs, we are committed to developing innovative manufacturing processes while continuously improving existing ones to produce high- quality, reliable products efficiently. Notable examples of our engineering processes include digital printing technology for toy decoration and Flexible Manufacturing Systems (FMS) for production within the Aerospace Segment.

We have entered into joint ventures to enhance our capabilities to develop new products and deliver engineering solutions. Our joint venture SQuAD, founded in 2011 has equipped us with enhanced capabilities to, among others, forge small to medium-sized aero-structural parts for engines, landing gear and braking system components in aluminium, steel, titanium or nickel-based alloys. Further, API, which is our joint venture with Magellan Aerospace Limited, Canada formed in 2007 has enabled us to provide innovative surface treatment solutions that are not readily available in India.

Quality Standards and Assurance We have a proven track record as a quality-focused manufacturer and are committed to maintaining high standards of quality. The long-term and growing relationships, both in terms of volume and range of products manufactured for several of our customers are a testament to our focus on quality. The provision of high-quality products is a key differentiator in our business, and is critical to our continued success and the maintenance of long-term relationships with our customers. To meet our commitment to provide high-quality products, we have implemented stringent quality tests across our manufacturing facilities. All our manufacturing facilities are approved by major global OEMs and are ISO certified (ISO 45001:14001) for quality, employee safety and environment.

Intellectual Property Our Company has been granted the worldwide, exclusive, perpetual and non-transferable license to use the trade name and trademark “Aequs” and its related trademarks and such other logos, by MFO IP Holdings Limited (formerly known as Aequs Limited, Malta) by way of a trademark agreement. For further details, please see “History and Certain Corporate Matters – Summary of key agreements - Trademark license agreement dated December 1, 2020 by and among MFO IP Holdings Limited (formerly known as Aequs Limited, Malta) (the “Licensor”) and our Company (the “Licensee”, together with the Licensor, the “Parties”) read with the amendment agreement dated October 1, 2022 and supersession understanding dated January 1, 2024 (together “Trademark Agreement”)” on page 339. Further, as on the date of this Prospectus, our Company has two registered trademarks, for the use of the logo and tradename ‘ECOSPHERE’ each under class 41, under the provisions of the Trademarks Act.

Information Technology Our information technology (“IT”) team has implemented technological and process controls to govern infrastructure, networks, systems, and applications, with business data security being the cornerstone of our efforts. We operate 18 hours of IT support per day, with 6 hours of on-demand services and support. Our IT

ecosystem is broadly organized into three pillars: infrastructure, information systems, systems applications and products (SAP) and enterprise resource planning (ERP) processes that support our manufacturing operations.

318The IT solutions team carries out periodic internal network scan for vulnerabilities, monitors network performances and allows limited access to internet through proxy to maintain the network security. Further, though the Business Continuity Policy, our Company validates and changes business continuity plans through simulation and testing. The team comprises of experienced individuals enabling us to fulfill business requirements and address growing demands. We foster talent and assist individuals in the team to learn and grow over time. Over the years, we have successfully managed the transition from conventional IT to the new-age technology environment, making it easier to use, more efficient, and cost-effective.

We have adopted SAP S/4HANA for enterprise resource management across all business operations, including key modules such as finance and controlling, warehouse, production planning, plant maintenance, quality management, business objects planning and consolidation, payroll.

Sales and Marketing The sales and business development (“BD”) and marketing and communications (“M&C”) departments engage with third parties to conduct comprehensive market research to uncover emerging trends, technologies, and new opportunities in the Aerospace Segment and Consumer Segment. Additionally, the BD department works in partnership with our account managers, cross functional teams and estimation departments to align customer requirements with technical capabilities and production schedules, thereby ensuring these are translated into actionable deliverables.

Whereas, our M&C department liaises with various members internally and external organisations for communicating our Company’s participation in certain events or announcing our Company’s achievements. This involves engaging with external stakeholders, such as industry associations, government bodies and partner organizations. Furthermore, our M&C department is responsible for brand building through transparent communication, both internally and externally, which includes internal branding efforts and maintaining media and industry relations. The department also publicizes our achievements, certifications, sustainability efforts and quality standards to establish credibility among all stakeholder groups.

Environmental, Social and Governance Environmental We adopt a variety of measures to limit the amount of hazardous and pollutant discharge that our manufacturing facilities release into the air and water. Electricity and water consumption are monitored by both the Environment, Health, and Safety (“EHS”) department at the entity level. To promote sustainability in electricity usage, we have implemented key measures, including the procurement of green energy, which currently accounts for 20% of our total consumption.

In our efforts to achieve water sustainability, we recycle wastewater through Effluent Treatment Plants (“ETP”) and Sewage Treatment Plants (“STP”), with monitoring conducted at the entity level and by the EHS department.

We have implemented a strategy on decarbonization approach which outlines our commitment and strategy towards achieving net zero greenhouse gases emissions, in accordance with international standards such as the Paris Agreement and the GHG Protocol. We closely monitor hazardous waste, air quality, and water pollution on a monthly basis, adhering to the guidelines set by the Karnataka State Pollution Control Board. Furthermore, we have established detailed policies and procedures, including:

• Environmental Impact Ruction Policy and Improvement Plan; • Air Emission Management Procedure; and • Hazardous Waste Management Procedure.

These initiatives reflect our commitment to environmental responsibility and sustainable operations.

Governance We have a defined framework for governing governance activities and have established objectives and policies to implement various aspects of our governance practices. Some of the key aspects are anti-bribery and anti- corruption policy, whistleblower policy, wellness and safety initiatives, that are aimed at ensuring compliant practices. Additionally, we have an Information Security Management System (“ISMS”) program to periodically review any emerging requirements, issue and challenges, initiatives, and continual improvements through performance metrics. The ISMS program is managed by our leadership and working groups.

319Social We have implemented several social policies, initiatives and programs for addressing the needs of our internal and external stakeholders through skill development, continued education, employee wellness and safety measures to address fundamental requirements. Additionally, through our CSR program, we engage with the community and take up educational support programs and health programs. We have adopted standards and best practices on occupational health and drive safety practices through implementation of our plans and training. Further, we promote diversity, equality and inclusion through internal and external campaigns and education of underprivileged children through external campaigns.

Corporate Social Responsibility Through one of our Group Companies, Aequs Foundation, we are actively engaged in corporate social responsibility (“CSR”) activities, including through following programs:

• Cognitive development program – To improve foundation literacy and numeracy through continuous interventions for Anganwadi and school students; • STEAM literacy program - To improve awareness, confidence, curiosity, knowledge and application towards STEAM education through various initiatives such as science centres, mobile science labs, teacher’s training and science fairs, among others;

• Student excel program – To assist students to achieve excellence in curricular and co-curricular performance by providing workbook support, career orientation and scholarship kits; • Health and hygiene program – To promote hygiene and sanitary practices by providing required infrastructure and educational programs for schools and students; and • One precious notebook – providing notebooks to government school students every year through the employee volunteering and contribution matching program.

The following table sets forth our expenditure on corporate social responsibility for the periods/years indicated:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Expenditure on corporate social responsibility (₹ in million) 4.22 2.21 4.22 Nil Nil Expenditure on corporate social responsibility, as a percentage of 0.08 0.05 0.05 Nil Nil revenue from operations (%) Employees As of September 30, 2025, we had 1,892 full-time employees, 1,834 employees on a contractual basis, 55 trainees, 432 apprentices and 325 fixed term employees. We regularly provide training to all our employees to ensure the quality of our products delivered to customers, and to mentor our employees’ competencies and skills.

The following table sets forth the breakdown of our employees by function:

Department Number of employees Admin 29 Corporate, marketing and communication, business development 20 Engineering 316 Finance, legal and enterprise resource planning 95 Health, safety and environment 42 Human resource 48 Information Technology and Information Security 49 Maintenance 75 Production 1,303 Production planning and control 43 Projects 74 Quality 470 Supply chain management 140 Total* 2,704 320* Includes full-time employees, fixed term employees, apprentices and trainees. Excludes contractual employees.

We also employee certain contract labourers and our facilities are registered under the Contract Labour (Regulation and Abolition) Act, 1970.

The table below sets forth the attrition rates of our full-time employees for the periods/years indicated:

Particulars Attrition (Full-time Number of full-time Attrition rate (Full-time employees) employees* employees)** (%) Six months period ended 125 1,892 6.61% September 30, 2025 Six months period ended 151 1,780 8.48% September 30, 2024 Financial Year 2025 294 1,785 16.47% Financial Year 2024 351 1,587 22.12% Financial Year 2023 270 1,403 19.24% *The number of full-time employees are as on last date of the financial year.

**Attrition rates for full-time employees is calculated as the percentage of annual attrition of full-time employees in a particular financial year to the number of full-time employees present at the end of the financial year.

For details, see “Risk Factors – The success of our business depends substantially on our management team and operational workforce. Our inability to attract or retain such manpower could adversely affect our business and operations” on page 79.

Insurance We maintain insurance coverage under various insurance policies such as policies are in relation to fire, burglary, special contingency excluding liability, machinery, electronic, equipment, commercial general liability, marine cargo policy, among others. We believe that the insurance coverage currently maintained by us represents an appropriate level of coverage required to insure our business and operations, and is in accordance with industry standards in India.

The following table sets out details of our insurance coverage on our tangible assets as of the periods/years

indicated:

Particulars As of As of September 30, September 30, March 31, 2025 March 31, 2024 March 31, 2023 2025 2024 Amount of insured assets (₹ in 14,339.57 10,730.56 11,877.58 8,969.45 6,389.63 million) Amount of insurance obtained (₹ in 19,449.93 14,287.84 19,449.82 14,287.84 13.214.18 million) Insured assets as percentage of total

67.18% 57.58% 63.86% 49.20% 48.34% assets Insurance coverage as a percentage

135.64% 132.92% 163.75% 159.29% 206.81% to insured assets Amount of uninsured assets (₹ in 7,003.94 7,904.44 6,720.82 9,260.38 6,827.28 million) Certain of our products supplied to one of our key customers, Hasbro, during the Financial Year 2020-2021 were voluntarily recalled due to its high ‘lead’ content. Our Company initiated an insurance claim for ₹72.80 million towards the cost incurred on such recall (for which Hasbro had raised various debit notes on one of our Subsidiaries, AEPPL). The insurance claim was partially honored during Financial Year 2023 and the insurer paid an amount of ₹32.40 million (representing 44.51% of the amount of insurance claim initiated by us) to AEPPL.

Apart from this instance, we have not faced any such instances of losses arising from insurance claims not being honored or insufficient insurance coverage, during the six months period ended September 30, 2025 and the past three Financial Years, that materially and adversely affected our results of operations. For details, see “Risk Factors – We may not be sufficiently protected or insured for certain losses that we may incur or claims that we may face against us, which may adversely affect our business, results of operations, financial condition and cash flows” on page 82.

Competition The Aerospace Segments and Consumer Segments are highly competitive, and we compete with other product 321manufacturers of the Aerospace Segment and Consumer Segment based on a variety of factors, including pricing, manufacturing capabilities, product quality, features, reliability and safety, technology, innovation and product development time and service levels (Source: F&S Report, see “Industry Overview”, para 1 on page 239). Our competitors include major aerospace and consumer electronics component manufacturing companies, as well as major consumer durables companies, both domestic and foreign.

For details, see “Risk Factors – An inability to compete effectively in the competitive aerospace and consumer industries could result in the loss of customers, which could have an adverse effect on our business, results of operations, financial condition and cash flows” on page 78.

Awards

The following are the key awards received by our Company: - ‘D2P Award by Airbus, for six years between 2016 to 2023; - ‘Ramp-up Champion Award’ for outstanding contribution to the Airbus ramp-up at the Global Supplier Conference in 2024;

- ‘SQIP Award - Supplier Chain and Quality Improvement Program’ by Airbus in 2023; and - ‘Special Award’ for procurement operations (material and parts) by Airbus in 2024.

Our Properties Our Company and Subsidiaries have entered into various lease deeds with Aequs SEZ Private Limited for certain parcels of lands including for our Registered Office and Corporate Office. Our Registered Office is situated at No.

Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru, Karnataka 560 048, India, on a leasehold basis, which is valid until terminated by either party. Our Corporate Office is situated at Aequs SEZ, No. 437/A, Hattargi Village, Hukkeri Taluk, Belagavi 591 243, Karnataka, India, on a leasehold basis, which is valid till March 13, 2033. Further, one of our Subsidiaries, AAI has entered into a lease agreement with another party for a piece of land located in Belagavi, Karnataka, for the purpose of establishing a manufacturing facility.

Our industrial areas are situated on leased parcels of land pursuant to lease agreements between Company, our Subsidiaries and Aequs SEZ Private Limited and Hubballi Durable Goods Cluster Private Limited in Belagavi, Hubballi and Koppal in Karnataka, India. Such lease agreements are typically (i) entered into for a period of (a) three to 15 years, or (b) 99 years; or (ii) or are valid until termination. See “ – Manufacturing Clusters and Facilities” for details of our manufacturing facilities on page 312 above.

The details of the property through which we operate our business is set out below:

S. No. Description of Lessor Lessee Purpose Date and Rent as Rate of the property term of the provided in Escalation lease/ the lease as provided license agreement in the lease (₹) agreement

1. Ar ea measuring 1 Aequs Aerospace Industrial 99 years 3,850,000 Nil Acre 4 Gunta in SEZ Processing from RS No.437/A Private India Private December Hissa No.129 and Limited Limited 20, 2008 Hissa No.130 Hattargi Village, Hukkeri Taluka, Belagavi District- 591243

2. Ar ea measuring Aequs Aerospace Industrial 10 years 1,148,539 5% upon 33291 Sq Ft in RS SEZ Processing from July every 12 No.437A Hissa Private India Private 1, 2019 months No.108 and Hissa Limited Limited No.109, Hattargi Village, Hukkeri Taluka, Belagavi District-591243

3. Ar ea measuring Aequs Aerospace Industrial 10 years 1,894,390.86 5% upon

54909.88 Sq Ft in SEZ Processing from every 12 322S. No. Description of Lessor Lessee Purpose Date and Rent as Rate of the property term of the provided in Escalation lease/ the lease as provided license agreement in the lease (₹) agreement RS No.437A Hissa Private India Private August 26, months No.108 and Hissa Limited Limited 2022 No.109, Hattargi Village, Hukkeri Taluka, Belagavi District-591243

4. Ar ea measuring 1 Aequs Aerospace Industrial 99 years 6,908,000 Nil Acre in RS SEZ Processing from No.437A Hissa Private India Private March 4, No.129 and Hissa Limited Limited 2014 No.130, Hattargi Village, Hukkeri Taluka, Belagavi District-591243

5. His sa No.138, Aequs Aerostructures Industrial 15 years 704,368 5% upon Hissa No.139, SEZ Assemblies from every 12 Hissa No.140 and Private India Private December months Hissa No.141 at Limited Limited 3, 2013 Hattargi Village, Hukkeri Taluka, Belagavi District- 591243

6. RS No.437A Hissa Aequs Aequs Industrial 10 years 4,938,277 5% upon No.110, Hissa SEZ Engineered from July every 12 No.111, Hissa Private Plastics Private 15, 2018 months No.112 , Hissa Limited Limited No.113, Hissa No.114, Hissa No.115, Hissa No.116, Hissa No.117, Hissa No.118 & Hissa No.128 at Hattargi Village, Hukkeri Taluka, Belagavi District-591243

7. RS No.437A Hissa Aequs Aequs Industrial September 1,446,890.39 First No.68 to Hissa SEZ Engineered 20, 2022 to escalation No.83, and Hissa Private Plastics Private April 30, on No.99 to Hissa Limited Limited 2029 (6 December 5, No.105 at Hattargi years, 7 2022 (5%) Village, Hukkeri months and and then 5% Taluka, Belagavi 10 days) upon every District-591243 12 months from December 5, 2022

8. RS No.437A Hissa Aequs Aequs Force Industrial 10 years 8,756,721 5% upon No.68 to Hissa SEZ Consumer from June every 12 No.83, and Hissa Private Products 1, 2019 months No.99 to Hissa Limited Private Limited No.105 at Hattargi Village, Hukkeri Taluka, Belagavi District-591243

9. RS No.437A Hissa Aequs Aequs Force Industrial September 102,788.60 First No.68 to Hissa SEZ Consumer 20, 2022 to escalation No.83, and Hissa Private Products April 30, on No.99 to Hissa Limited Private Limited 2029 (6 December No.105 at Hattargi years, 7 13, 2022 Village, Hukkeri months and (5%) and Taluka, Belagavi 10 days) then 5% 323S. No. Description of Lessor Lessee Purpose Date and Rent as Rate of the property term of the provided in Escalation lease/ the lease as provided license agreement in the lease (₹) agreement District-591243 upon every 12 months from December 13, 2022

10. RS No.437A Hissa Aequs Aequs Limited Industrial 10 years 1,556,283.05 3% upon No.140, 141 & SEZ from every 12 142+143 at Private March 14, months Hattargi Village, Limited 2023 Hukkeri Taluka, Belagavi District- 591243

11. RS No.437A Hissa Aequs Aequs Limited Industrial 10 years 1,226,664 5% upon No.140 to 144 at SEZ from April every 12 Hattargi Village, Private 1, 2018 months Hukkeri Taluka, Limited Belagavi District- 591243

12. RS No.437A Hissa Aequs AeroStructures Industrial 10 years 3% upon No.135 to Hissa SEZ Manufacturing from 2,108,371.63 every 12 No.138 at Hattargi Private India Private March 28, months Village, Hukkeri Limited Limited 2023 Taluka, Belagavi District-591243

13. RS No.437A Hissa Aequs AeroStructures Industrial 10 years 2,829,990 5% upon No.132 to Hissa SEZ Manufacturing from every 12 No.135 at Hattargi Private India Private January 1, months Village, Hukkeri Limited Limited 2018 Taluka, Belagavi District-591243

14. RS No.437A Hissa Aequs AeroStructures Industrial 10 years 1,925,336 5% upon No.144 to Hissa SEZ Manufacturing from April every 12 No.149 at Hattargi Private India Private 1, 2018 months Village, Hukkeri Limited Limited Taluka, Belagavi District-591243

15. RS No.437A Hissa Aequs AeroStructures Industrial 10 years 617,720 5% upon No.134 to Hissa SEZ Manufacturing from every 12 No.138 at Hattargi Private India Private August 26, months Village, Hukkeri Limited Limited 2022 Taluka, Belagavi District-591243

16. RS No.202 Hissa Aequs Aequs Toys Industrial 10 years 3,009,195 5% upon No.1 and Hissa SEZ Private Limited from every 12 No.2 at Talabal Private August 15, months Village, Kuknoor Limited 2022 (as Taluka, Koppal per District, handover Karnataka, India. letter)

17. RS No.131 Hissa Aequs Aequs Toys Industrial 10 years 4,475,277.90 5% upon No.1, RS No.137, SEZ Private from every 12 RS No.138 Hissa Private Limited- August 9, months No.1, 2, 3 and RS Limited 2022 No. 139 Hissa No.1 and 2 at Talabal Village, Kuknoor Taluka, Koppal District, Karnataka, India.

18. RS No.130 Hissa Aequs Koppal Toys Industrial 10 years 4,124,452.50 5% upon No.1, RS No.137, SEZ Molding COE from every 12 RS No.131 Hissa Private Private Limited August 1, months 324S. No. Description of Lessor Lessee Purpose Date and Rent as Rate of the property term of the provided in Escalation lease/ the lease as provided license agreement in the lease (₹) agreement No.1, and RS No. Limited 2022 138 Hissa No.2 and 3 at Talabal Village, Kuknoor Taluka, Koppal District, Karnataka, India

19. Ar ea measuring Aequs Aequs Rajas Industrial 10 years 235,106 5% upon 12374 sq.ft Sq Ft SEZ Extrusion from every 12 in RS No.136 at Private Private Limited September months Talabal Village, Limited 9, 2022 Kuknoor Taluka, Koppal District, Karnataka, India

20. Ar ea measuring 5 Aequs SQuAD Industrial 99 years 30,000,000* Nil Acers in RS SEZ Forging India from No.437A Hissa Private Private Limited November No110 to Hissa Limited 19, 2011 No.113, at Hattargi Village, Hukkeri Taluka, Belagavi District- 591243

21. RS No.11 Hissa Hubballi Aequs Industrial 10 years 2,375,295.44 First No.12 at Hubballi Durable Cookware from escalation Durable Goods Goods Private Limited October 1, on Cluster Industrial Cluster 2024 November Area, Ittagatti 1, 2024 Village, Dharwad (5%) and District, Hubballi, then 5% Karnataka, India upon every 12 months from November 1, 2024

22. RS No.11 Hissa Hubballi Aequs Industrial 10 years 6,764,198.34 5% upon No.8 to 12 at Durable Consumer from every 12 Hubballi Durable Goods Products September months Goods Cluster Cluster Private Limited 28, 2022 Industrial Area, Ittagatti Village, Dharwad District, Hubballi, Karnataka, India

23. Ae qus Tower, MFRE Aequs Office space 3 years 324,000 for NIL No.55, Whitefield Private Engineered from entire term Main Road Trust Plastics Private September Mahadevapura Limited 8, 2025 Post, Bengaluru- 560048

24. Ae qus Tower, MFRE Aerostructures Office space 3 years 324,000 for NIL No.55, Whitefield Private Manufacturing from entire term Main Road Trust India Private September Mahadevapura Limited 8, 2025 Post, Bengaluru- 560048

25. Ae qus Tower, MFRE Aequs Office space 3 years 324,000 for NIL No.55, Whitefield Private Consumer from entire term Main Road Trust Products September Mahadevapura Private Limited 8, 2025 Post, Bengaluru- 560048 325S. No. Description of Lessor Lessee Purpose Date and Rent as Rate of the property term of the provided in Escalation lease/ the lease as provided license agreement in the lease (₹) agreement

26. Ae qus Tower, MFRE Aequs Limited Office space 3 years 324,000 for Nil No.55, Whitefield Private from entire term Main Road Trust September Mahadevapura 8, 2025 Post, Bengaluru- 560048

27. Plo t No.118 D&E Rahul Aerostructures Industrial 3 years 139,500 5% upon in the Honaga Packers Assemblies from April every 12 Industrial Area of India Private 1, 2025 months Belagavi Limited comprised in Sy.No.536 within the village limits of Honaga, Hobli:

Kakathi, Taluk &

District: Belagavi- 591156 * Constitutes the entire rent for the term of the agreement.

Further, except for Rahul Packers, all our lessors are related parties of our Company.

The table below sets out the number of properties through which we operate our business:

Type of property Number of such property Term of lease Registered office 1 Valid until terminated by either party Corporate office 1 March 13, 2033 Industrial areas 22 Multiple 326KEY REGULATIONS AND POLICIES The following is a brief overview of certain key sector specific relevant laws and regulations which are applicable to the business and operations of our Company and its Subsidiaries. The information detailed below has been obtained from various legislations, including rules and regulations promulgated by regulatory bodies, that are available in public domain. The description of laws and regulations set out below may not be exhaustive and is only intended to provide general information to the investors and is neither designed nor intended to substitute for professional legal advice. The statements below are based on the current provisions of law and the judicial, regulatory and administrative interpretations thereof, which are subject to change or modification by subsequent legislative actions, regulatory, administrative, quasi-judicial, or judicial decisions.

KEY REGULATIONS AND POLICIES IN INDIA Factories Act, 1948 (“Factories Act”) The Factories Act, as amended, defines a “factory” to cover any premises which employs 10 or more workers on any day of the preceding 12 months and in which a manufacturing process is carried on with the aid of power or any premises where at least 20 workers are employed, and where a manufacturing process is carried on without the aid of power. Each State Government has enacted rules in respect of the prior submission of plans and their approval for the establishment of factories and registration/licensing thereof. The Factories Act provides for imposition of fines and imprisonment of the manager and occupier of the factory in case of any contravention of the provisions of the Factories Act.

Special Economic Zones Act, 2005 (the “SEZ Act”) and the Special Economic Zone Rules, 2006 (“SEZ Rules”) each as amended SEZs are regulated and governed by the SEZ Act. The SEZ Act has been enacted for the establishment, development and management of the SEZs for the promotion of exports. A SEZ is a specifically delineated duty- free enclave, deemed to be a foreign territory for the purposes of trade as well as duties and tariffs. A board of approval has been set up under the SEZ Act, which is responsible for promoting the SEZ and ensuring its orderly development. The SEZ Board has a number of powers including the authority to approve proposals for the establishment of the SEZ, the operations to be carried out in the SEZ by the developer, the foreign collaborations and foreign direct investments.

The SEZ Rules have been enacted to effectively implement the provisions of the SEZ Act. The SEZ Rules provide for a simplified procedure for a single window clearance from central and state governments for setting up of SEZs and a “unit” in SEZ. The SEZ Rules also prescribe the procedure for the operation and maintenance of an SEZ, for setting up and conducting business therein with an emphasis on self-certification and the terms and conditions subject to which entrepreneur and developer shall be entitled to exemptions, drawbacks and concessions. The SEZ Rules also provide for the minimum area requirement for various categories of SEZs.

Legal Metrology Act, 2009 (the “LM Act”) and the Legal Metrology (Packaged Commodities) Rules, 2011 (“Packaged Commodity Rules”) The LM Act seeks to establish and enforce standards of weights and measures, regulate trade and commerce in weights, measures and other goods which are sold or distributed by weight, measure or number. The LM Act and rules framed thereunder regulate, inter alia, the labelling and packaging of commodities, appointment of government-approved test centres for verification of weights and measures used and lists penalties for offences and compounding of offences under it. Any non-compliance or violation under the LM Act may result in, inter alia, a monetary penalty on the manufacturer, seller, distributor, or seizure of the goods or imprisonment in certain cases. The LM Act defines “pre-packaged commodity” as a commodity which without the purchaser being present is placed in a package of a pre-determined quantity. The Packaged Commodities Rules prescribes the regulations for imports, pre-packing and the sale of commodities in a packaged form intended for retail sale, wholesale and for export and import, registration of manufacturers, packers and importers, certain rules to be adhered to by importers, wholesale and retail dealers, the declarations to be made on every package, the size of label and the manner in which the declarations shall be made, etc. These declarations that are required to be made include, inter alia, the name and address of the manufacturer, the dimensions of the commodity, the maximum retail price, generic name of the product, the country of origin and the weight and measure of the commodity in the manner as set forth in the Packaged Commodity Rules. The Packaged Commodity Rules have subsequently incorporated amendments to increase protection granted to consumers especially relating to e-commerce entities. Pursuant to the amendments, e-commerce entities are to ensure that mandatory declarations are displayed on the digital and electronic network used for e-commerce transactions. In the marketplace model of e-commerce, responsibility of 327correctness of the declarations lies with the manufacturer, or seller or dealer or importer provided certain conditions are met. Further, includes amendments in relation to the unit price declared on the pre-packaged commodity, declaration of the retail sale on packaging to be provided in Indian currency amongst others.

Bureau of Indian Standards Act, 2016 (the “BIS Act”) The BIS Act provides for the establishment of the BIS for the harmonious development of the activities of standardisation, conformity assessment and quality assurance of goods, articles, processes, systems and services and for matters connected therewith or incidental thereto. The BIS Act provides for the functions of the BIS which includes, among others (a) establish branches, offices or agencies in India or outside; (b) undertake testing of samples and activities relating to legal metrology; (c) enter into and search places, premises or vehicles, and inspect and seize goods or articles and documents; and (d) functions necessary for promotion, monitoring and management of the quality of goods, articles, processes, systems and services and to protect the interests of consumers and other stake holders.

The BIS Act empowers the Central Government to order compulsory use of standard mark for any goods or article if it finds it expedient to do so in public interest, national security, protection of human, animal or plant health, safety of environment or prevention of unfair trade practices. The BIS Act also provides the penalties in case there is a contravention of the provisions of the BIS Act.

Karnataka Shops and Commercial Establishments Act, 1961 (the “Karnataka S&E Act”) and the Karnataka Shops and Commercial Establishments Rules, 1963 The Karnataka S&E Act applicable in the state of Karnataka where establishments of the Company are set up and required to be registered, regulates the working and employment conditions of the workers employed in shops and establishments including commercial establishments and provides for fixation of opening and closing hours, daily and weekly working hours, rest intervals, overtime, holidays, leave, health and safety measures, termination of service, wages for overtime work, maintenance of shops and establishments and other rights and obligations of the employers and employees. The Karnataka S&E Act and rules framed thereunder also prescribe penalties in the form of monetary fine or imprisonment for violation of the Karnataka S&E Act.

Competition Act, 2002 (the “Competition Act”) The Competition Act is an act to prevent practices having adverse effect on competition, to promote and sustain competition in markets, to protect the interests of consumers and to ensure freedom of trade in India. The Competition Act deals with prohibition of (i) certain agreements such as anti-competitive agreements and (ii) abuse of dominant position and regulation of combinations. No enterprise or group shall abuse its dominant position in various circumstances as mentioned under the Competition Act. The prima facie duty of the Competition Commission of India (“CCI”) is to eliminate practices having adverse effect on competition, promote and sustain competition, protect interests of consumers and ensure freedom of trade. The CCI shall issue notice to show cause to the parties to combination calling upon them to respond within 15 days in case it is of the opinion that there has been an appreciable adverse effect on competition in India. In case a person fails to comply with the directions of the CCI and Director General (as appointed under Section 16(1) of the Competition Act), he shall be punishable with a fine which may go up to ₹ 100,000 for each day during such failure subject to maximum of ₹ 10,000,000, as the CCI may determine.

Environmental Legislations Environment (Protection) Act, 1986 (the “EP Act”), Environment Protection Rules, 1986 (the “EP Rules”), and Environmental Impact Assessment Notification, 2006 (the “EIA Notification”) each as amended The EP Act has been enacted for the protection and improvement of the environment. EP Act empowers the Central Government to take all measures to protect and improve the quality of environment, such as by laying down standards for emission and discharge of pollutants, providing for restrictions regarding areas where industries may operate and laying down safeguards for handling hazardous substances. Further, the EP Rules specify, among others, the standards for emission or discharge of environmental pollutants, restrictions on the location of industries and restrictions on the handling of hazardous substances in different areas. For contravention of any of the provisions of the EP Act or the EP Rules, the punishment includes either imprisonment or fine or both. Additionally, under the EIA Notification, projects are required to mandatorily obtain environmental clearance from the concerned authorities depending on the potential impact on human health and resources.

328Air (Prevention and Control of Pollution) Act, 1981, as amended (the “Air Act”) The Air Act provides for the prevention, control and abatement of air pollution in India. The Air Act is applicable to areas which is notified as an ‘air pollution control area’ by the state pollution control board. The Air Act stipulates that no person shall, without prior written consent of the relevant state pollution control board, establish or operate any industrial plant which emits air pollutants in an air pollution control area. Further, such an industrial plant shall not be permitted to emit air pollutants in excess of the standards laid down by the state pollution control board. The Air Act prescribes specific amounts of fine and terms of imprisonment for various contraventions.

Water (Prevention and Control of Pollution) Act, 1974, as amended (the “Water Act”) The Water Act provides for control and prevention of water pollution and for maintenance or restoration of wholesomeness of water in the country. The objective of this legislation is to ensure that the domestic and industrial pollutants are not discharged into rivers and lakes without adequate treatment, which shall otherwise render the water unsuitable as a source of drinking water as well as for the purposes of irrigation and support of marine life. In order to achieve its objectives, the pollution control boards at central and state levels were created to establish and enforce standards for factories discharging pollutants into water bodies. Further, any person intending to establish any industry, operation or process or any treatment and disposal system which is likely to discharge sewage or other pollution into a water body is required to obtain prior consent of the relevant state pollution control board. The Water Act prescribes specific amounts of fine and terms of imprisonment for various contraventions.

Hazardous and Other Wastes (Management and Transboundary Movement) Rules, 2016, as amended (the “Hazardous Waste Rules”) The Hazardous Waste Rules regulate the management, treatment, storage and disposal of hazardous waste. Under the Hazardous Waste Rules, “hazardous waste” inter alia means any waste which by reason of characteristics such as physical, chemical, biological, reactive, toxic, flammable, explosive or corrosive, causes danger or is likely to cause danger to health or environment, whether alone or in contact with other wastes or substances. Every occupier of a facility generating hazardous waste must obtain authorization from the relevant state pollution control board. Further, the occupier, importer or exporter, or operator of a disposal facility is liable for damage caused to the environment or third party resulting from the improper handling and management and disposal of hazardous waste and shall be liable to pay any financial penalty that may be levied by the respective state pollution control board for violation of the Hazardous Waste Rules.

Solid Wastes Management Rules, 2016 (“SWM Rules”) The SWM Rules were notified by the Ministry of Environment, Forest and Climate Change, Government of India, to replace the earlier Municipal Solid Wastes (Management and Handling) Rules, 2000. The SWM Rules provide a comprehensive framework for the management, handling, and disposal of solid waste in India, with the objective of ensuring environmentally sound management and minimising adverse impacts on human health and the environment.

Noise Pollution (Regulation and Control) Rules, 2000 as amended (the “Noise Pollution Rules”) The Noise Pollution Rules were enacted to regulate and control noise producing and generating sources with the objective of maintaining ambient air quality standards in respect of noise in different areas/zones. Pursuant to the Noise Pollution Rules, different areas/zones shall be classified into industrial, commercial, residential or silence areas/zones, with each area having a permitted ambient air quality standard in respect of noise. The Noise Pollution Rules provide for penalties in case the noise levels in any area/zone exceed the permitted standards.

Labour Related Regulations The various other labour and employment-related legislations (and rules issued thereunder) that may apply to our operations, from the perspective of protecting the workers’ rights and specifying registration, reporting and other compliances, and the requirements that may apply to us as an employer, would include the following:

1. Labour Welfare Fund Act, 1965

2. Tax on Professions, Trades, Callings and Employments Act, 1976

3. Sexual Harassment of Women at Workplace (Prevention, Prohibition and Redressal) Act, 2013

3294. Apprentices Act, 1961

5. Rights of Persons with Disabilities Act, 2016

6. Code on Wages, 2019*

7. Code of Social Security, 2020*

8. The Occupational Safety, Health and Working Conditions Code, 2020*

9. The Industrial Relations Code, 2020* * The Government of India implemented the following: Code of Wages, 2019, Code of Social Security, 2020, the Occupational Safety, Health and Working Conditions Code, 2020 and the Industrial Relations Code, 2020, through Gazette notifications dated November 21, 2025. Post implementation of such labour codes, collectively they replace and subsume 29 erstwhile central labour acts.

Laws relating to Intellectual Property In India, patents, trademarks and copyrights enjoy protection under both statutory and common law. The key legislations governing intellectual property in India and which are applicable to our Company are the Patents Act, 1970, The Protection of Plant Varieties and Farmers Rights Act, 2001 and the Trade Marks Act, 1999. These enactments provide for the protection of intellectual property by imposing civil and criminal liability for infringement. In addition to the domestic laws, India is party to several international intellectual property related instruments including the Patent Cooperation Treaty, 1970, the Paris Convention for the Protection of Industrial Property, 1883, the Berne Convention for the Protection of Literary and Artistic Works, 1886, the Universal Copyright Convention adopted at Geneva in 1952, the International Convention for the Protection of Performers, Producers of Phonograms and Broadcasting Organizations, 1961, and as a member of the World Trade Organisation, India also is a signatory to the Agreement on Trade Related aspects of Intellectual Property Rights (“TRIPS”).

The Patents Act 1970 (the “Patents Act”) The Patents Act governs the patent regime in India. A patent under the Patents Act is an intellectual property right relating to inventions and grant of exclusive right, for limited period, provided by the Government to the patentee, in exchange of full disclosure of his invention, for excluding others from making, using, selling and importing the patented product or process or produce that product. Being a signatory to the TRIPS, India is required to recognize product patents as well as process patents. In addition to the broad requirement that an invention must satisfy the requirements of novelty, utility and non-obviousness in order for it to avail patent protection, the Patents Act further provides that patent protection may not be granted to certain specified types of inventions and materials even if they satisfy the above criteria.

Trade Marks Act, 1999 (the “Trade Marks Act”) The Trade Marks Act governs the registration, statutory protection of trademarks and prevention of the use of fraudulent marks in India. Indian law permits the registration of trademarks for both goods and services. It also provides for exclusive right to marks such as brand, label, and heading and to obtain relief in case of infringement for commercial purposes as a trade description. Under the provisions of the Trade Marks Act, an application for trademark registration may be made with the Trade Marks Registry by any person or persons claiming to be the proprietor of a trademark, whether individually or as joint applicants, and can be made on the basis of either actual use or intention to use a trademark in the future. Once granted, a trademark registration is valid for 10 years unless cancelled, after which, it can be renewed. If not renewed, the mark lapses and the registration is required to be restored to gain protection under the provisions of the Trade Marks Act. The Trade Marks Act prohibits registration of deceptively similar trademarks and provides for penalties for infringement, falsifying and falsely applying trademarks among others. Further, pursuant to the notification of the Trade Marks (Amendment) Act, 2010, simultaneous protection of trademark in India and other countries has been made available to owners of Indian and foreign trademarks. It also seeks to simplify the law relating to the transfer of ownership of trademarks by assignment or transmission and to bring the law in line with international practices.

Laws governing foreign investments Foreign investment in India is governed by the provisions of the Foreign Exchange Management Act, 1999 (“FEMA”) and the rules, regulations and notifications thereunder, as issued by the RBI from time to time and the 330FEMA Non-Debt Instruments Rules and the Foreign Direct Investment Policy (“FDI Policy”). In terms of the FDI Policy, foreign investment is permitted (except in the prohibited sectors) in Indian companies either through the automatic route or the Government route, depending upon the sector in which the foreign investment is sought to be made. In terms of the FDI Policy, the work of granting government approval for foreign investment under the FDI Policy and FEMA has now been entrusted to the concerned administrative ministries/departments.

The FEMA Non-Debt Instrument Rules were enacted on October 17, 2019 in supersession of the Foreign Exchange Management (Transfer or Issue of Security by a Person Resident Outside India) Regulations, 2017, except for things done or omitted to be done before such supersession. The total holding by any individual NRI, on a repatriation basis, shall not exceed five percent of the total paid-up equity capital on a fully diluted basis or shall not exceed 5% of the paid-up value of each series of debentures or preference shares or share warrants issued by an Indian company and the total holdings of all NRIs and OCIs put together shall not exceed 10% of the total paid-up equity capital on a fully diluted basis or shall not exceed 10% of the paid-up value of each series of debentures or preference shares or share warrant, provided that the aggregate ceiling of 10% may be raised to 24% if a special resolution to that effect is passed by the general body of the Indian company. The total holding by each FPI or an investor group, shall be less than 10% of the total paid-up equity capital on a fully diluted basis or less than 10% of the paid-up value of each series of debentures or preference shares or share warrants issued by an Indian company and the total holdings of all FPIs put together, including any other direct and indirect foreign investments in the Indian company permitted under these rules, shall be up to the sectoral cap applicable to the sector in which our Company operates. The said limit of 10% and 24% shall be called the individual and aggregate limit, respectively.

The RBI, with an aim to operationalise a new overseas investment regime, has introduced the new Foreign Exchange Management (Overseas Investment) Rules, 2022 (“OI Rules”) and the Foreign Exchange Management (Overseas Investment) Regulations, 2022 (“OI Regulations”), vide Notification No. G.S.R. 646(E) and

Notification No. FEMA 400/2022-RB dated August 22, 2022 respectively. Further, the Foreign Exchange Management (Overseas Investment) Directions, 2022 (“OI Directions”) were introduced to be read with the OI Rules and the OI Regulations. The new regime simplifies the framework to cover wider economic activity and thereby, significantly reducing the need for specific approvals. Investment may be made by an Indian entity only in a foreign entity engaged in activities permissible under the law in force in India and the host jurisdiction. Any manner of Overseas Direct Investment (“ODI”) by an Indian entity shall be made as prescribed in the OI Rules,

namely: (i) subscription as part of MoA or purchase of equity capital, (ii) acquisition through bidding or tender procedure, (iii) acquisition of equity capital by way of rights issue or allotment of bonus shares, (iv) capitalisation of any amount due from the foreign entity subject to applicable conditions, (v) swap of securities, and (vi) merger, demerger, amalgamation or any scheme of arrangement.

The Consolidated Foreign Direct Investment Policy of 2020 (the “Consolidated FDI Policy”) The Department for Promotion of Industry and Internal Trade (“DPIIT”), Ministry of Commerce and Industry on October 28, 2020 issued Consolidated FDI Policy, effective from October 15, 2020. The Consolidated FDI Policy permits our Company 100% FDI under the automatic route. Pursuant to Press Note 3 of 2020, dated April 17, 2020, issued by the DPIIT, the Consolidated FDI Policy was amended with effect from October 15, 2020 to state that all investments under the foreign direct investment route by entities of a country which shares land border with India or where the beneficial owner of an investment into India is situated in or is a citizen of any such country will require prior approval of the GoI. Further, in the event of transfer of ownership of any existing or future foreign direct investment in an entity in India, directly or indirectly, resulting in the beneficial ownership falling within the aforesaid restriction/ purview, such subsequent change in the beneficial ownership will also require approval of the GoI.

The Foreign Trade (Development and Regulation) Act, 1992 and the rules framed thereunder.

The Foreign Trade (Development and Regulation) Act, 1992 (“FTA”), read along with Foreign Trade

(Regulation) Rules, 1993, provides for the development and regulation of foreign trade by facilitating imports into, and augmenting exports from, India and for matters connected therewith or incidental thereto. As per the provisions of the FTA, the Government of India: (i) may make provisions for facilitating and controlling foreign trade; (ii) may prohibit, restrict and regulate exports and imports, in all or specified cases as well as subject them to exemptions; (iii) is authorised to formulate and announce an export and import policy and also amend the same from time to time, by notification in the official gazette; and (iv) is also authorised to appoint a ‘director general of foreign trade’ for the purpose of the FTA, including formulation and implementation of the export-import (“EXIM”) policy.

The FTA prohibits anybody from undertaking any import or export except under an importer-exporter code 331number (“IEC”) granted by the director general of foreign trade pursuant to Section 7 of the FTA. Hence, every entity in India engaged in any activity involving import/export is required to obtain an IEC unless specifically exempted from doing so. Failure to mention IEC number attracts a penalty of not less than ₹ 10,000 and not more than five times the value of the goods or services or technology in respect of which any contravention is made or is attempted to be made, whichever is made. The IEC shall be valid until it is cancelled by the issuing authority.

Laws relating to Taxation In addition, some of the tax legislations that may be applicable to the operations of our Company include, the Income Tax Act, 1961, the Income Tax Rules, 1962, as amended by the Finance Act in respective years, Central Goods and Service Tax Act, 2017, the Central Goods and Service Tax Rules, 2017, the Integrated Goods and Service Tax Act, 2017, the Customs Act, 1962, the Customs Tariff Act, 1975, the Professional Tax state-wise legislations (including the Maharashtra State Tax on Professions, Trades, Callings and Employments Act, 1975);

importer- exporter code; and the Indian Stamp Act, 1899.

Remission of Duties and Taxes on Exported Products Scheme (“RoDTEP Scheme”) The RoDTEP Scheme was introduced by the Government of India to replace the earlier Merchandise Exports from India Scheme (MEIS), which was found to be non-compliant with World Trade Organization (WTO) rules.

The primary objective of RoDTEP is to reimburse exporters for various duties, taxes, and levies incurred during the manufacturing and distribution of exported products, which are not otherwise refunded or exempted under any other scheme or legislation in India.

SEBI Act and regulations From time to time, our Company will be required to comply with various regulations notified by the SEBI including the SEBI Act, SCRA, SEBI Listing Regulations, SEBI (Prohibition of Insider Trading) Regulations, 2015, SEBI (Prohibition of Fraudulent and Unfair Trade Practices) Regulations, 2003, SEBI ICDR Regulations, SEBI (Share Based Employee Benefits and Sweat Equity) Regulations, 2021 and SEBI (Issue and Listing of Non- Convertible Securities) Regulations, 2021, to the extent applicable. Set out below is a summary of these

regulations:

(i) Securities and Exchange Board of India Act, 1992 (“SEBI Act”) SEBI Act establishes SEBI as the principal regulatory authority overseeing India’s securities markets. It confers comprehensive powers upon SEBI to regulate all facets of securities markets, including issuance, listing, and trading activities. The SEBI Act authorizes SEBI to safeguard investor interests, maintain market integrity, and foster market development through regulations, circulars, and guidelines.

Furthermore, it empowers SEBI to conduct investigations into potential violations, impose administrative and monetary sanctions, and pursue enforcement actions against non-compliant market participants.

(ii) Securities Contracts (Regulation) Act, 1956 (“SCRA”) SCRA regulates securities transactions and establishes the legal infrastructure for stock exchanges within India. It comprehensively defines securities and financial instruments while governing listing requirements and prohibiting unauthorized trading. The SCRA establishes parameters for recognition of exchanges and empowers the central government and SEBI to implement measures for intervention when necessary to protect investor interests or preserve market stability. It also provides the statutory basis for regulation of derivatives and other complex financial instruments.

(iii) Securities and Exchange Board of India (Listing Obligations and Disclosure Requirements) Regulations, 2015 (“SEBI Listing Regulations”) SEBI Listing Regulations delineate ongoing compliance obligations and disclosure requirements for companies with listed securities. It establishes requirements for financial disclosures, corporate governance standards, investor grievance mechanisms, and timely reporting of material events. The SEBI Listing Regulations mandates specific committee compositions, independent director requirements, and related party transaction approvals. It prescribes formats and timelines for periodic submissions to exchanges and requires the appointment of qualified compliance officers to ensure adherence to regulatory requirements.

(iv) Securities and Exchange Board of India (Prohibition of Insider Trading) Regulations, 2015 (“SEBI PIT Regulations”) 332SEBI PIT Regulations prohibit trading in securities while in possession of unpublished price-sensitive information (“UPSI”). It deals with insider trading offenses, establishes trading restrictions for designated persons, and mandates disclosure requirements for promoters, directors, and key management personnel of a company. It requires companies to formulate a code of conduct, implement trading plans for insiders, and establish mechanisms for identifying and protecting UPSI. The SEBI PIT Regulations further prescribe structured digital databases to track UPSI recipients and specify procedures for legitimate communications with stakeholders.

(v) Securities and Exchange Board of India (Prohibition of Fraudulent and Unfair Trade Practices) Regulations, 2003 (“SEBI PFUTP Regulations”) SEBI PFUTP Regulations prohibit manipulative, fraudulent, and unfair practices in connection with securities markets. It defines various categories of prohibited activities including market manipulation, price rigging, misleading statements, and artificial transactions designed to create false market impressions.

The SEBI PFUTP Regulations empowers SEBI to investigate suspected violations, issue cease-and-desist orders, and impose monetary penalties and market access restrictions. It also establishes the basis for disgorgement of ill-gotten gains and provide for restitution to affected investors harmed by fraudulent practices.

(vi) Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018 (“SEBI ICDR Regulations”) SEBI ICDR Regulations regulate the issuance of equity and convertible securities and disclosure requirements for companies raising funds through various channels including, inter alia, initial public offer, further public offer, rights issue and qualified institutional placement. It sets out the guidelines and framework that companies must follow to issue equity and convertible securities to the public. It also outlines the disclosure requirements pertaining to all material information, risks, and details about the financial health of the company to undertake such issuances.

(vii) Securities and Exchange Board of India (Share Based Employee Benefits and Sweat Equity) Regulations, 2021 (“SEBI SBEB & SE Regulations”) SEBI SBEB & SE Regulations govern the share-based employee benefit schemes of equity listed companies. It is applicable to an equity listed company that seeks to issue sweat equity shares or has a

scheme: (i) for direct or indirect benefit of employees; (ii) involving dealing in or subscribing to or purchasing securities of the company, directly or indirectly; and (iii) satisfying, directly or indirectly, any

one of the following conditions: the scheme is set up by the company or any other company in its group; the scheme is funded or guaranteed by the company or any other company in its group; and the scheme is controlled or managed by the company or any other company in its group.

(viii) Securities and Exchange Board of India (Issue and Listing of Non-Convertible Securities) Regulations, 2012 (“SEBI ILNCS Regulations”) SEBI ILNCS Regulations govern the issuance and listing of debt securities and non-convertible securities by an issuer by way of public issuance, or on private placement basis which are proposed to be listed and listing of commercial paper issued by an issuer in compliance with the guidelines framed by the Reserve Bank of India. It also outlines the disclosure requirements pertaining to all material information, risks, and details about the financial health of the company to undertake such issuances.

Other Applicable Legislations In addition to the above, our Company is required to comply with the provisions of the Indian Contract Act, 1872, Companies Act 2013, Transfer of Property Act, 1882, the Indian Easement Act, 1882, the Indian Stamp Act, 1899, the Registration Act, 1908 to the extent applicable, SEBI Listing Regulations, RBI guidelines, IBC, and other 333applicable laws and regulations imposed by the central and state governments and other authorities for the day- to-day operations, business, and administration of our Company.

334HISTORY AND CERTAIN CORPORATE MATTERS Brief history of our Company Our Company was originally incorporated as “Mechanical Training Acadamy Private Limited” on March 27, 2000, as a private limited company under the Companies Act, 1956 at Bengaluru, Karnataka, India, pursuant to a certificate of incorporation issued by the RoC. The name of our Company was changed to “QuEST Machining & Manufacturing Private Limited”, pursuant to a resolution passed by our Board dated February 24, 2006, and a special resolution passed by our Shareholders dated March 24, 2006 and a fresh certificate of incorporation dated April 18, 2006 was issued by the RoC. Subsequently, pursuant to a resolution passed by our Board dated February 22, 2011, and a special resolution passed by our Shareholders dated March 7, 2011, the name of our Company was changed to “QuEST Global Manufacturing Private Limited” and a fresh certificate of incorporation dated March 24, 2011 was issued by the RoC. Thereafter, pursuant to a resolution passed by our Board dated January 23, 2014 and a special resolution passed by our Shareholders dated February 25, 2014, the name of our Company was changed to “Aequs Private Limited” and a fresh certificate of incorporation dated March 5, 2014 was issued by the RoC. Upon the conversion of our Company into a public limited company, pursuant to a resolution passed by our Board on April 9, 2025 and a special resolution passed by our Shareholders on April 25, 2025, the name of our Company was changed to “Aequs Limited”, and a fresh certificate of incorporation dated May 7, 2025 was issued by the RoC CPC.

Changes in the registered office of our Company Details of changes in the registered office address of our Company since the date of incorporation are as set out

below:

Effective date Details of change in the registered office Reasons for change June 27, 2000 The address of the registered office of our Company was Administrative convenience changed from “Bharani”, No. 27, 1st Floor, 5th “B” Cross, 16th Main, B.T.M. Layout, Bengaluru, Karnataka, 560 076 India to No. 30, Ground Floor, 7th Cross, Agrahara Dasarahalli, Magadi Main Road, Bengaluru, Karnataka 560 079, India October 1, 2005* The address of the registered office of our Company was Administrative convenience changed from No. 30, Ground Floor, 7th Cross, Agrahara Dasarahalli, Magadi Main Road, Bengaluru, Karnataka 560 079, India to Meriside Heights, 5th Floor, Nagavarapalya Village, Benniganahalli, K. R. Puram, Hobli, Bengaluru, Karnataka 560 068, India August 1, 2006 The address of the registered office of our Company was Administrative convenience changed from Meriside Heights, 5th Floor, Nagavarapalya Village, Benniganahalli, K. R. Puram, Hobli, Bengaluru, Karnataka 560 068 to No. 7/13, 21/2 Bhattarhalli, 14th KM, Old Madras Road, Bengaluru, Karnataka 560 049, India December 8, 2012 The address of the registered office of our Company was Administrative convenience changed from No. 7/13, 21/2 Bhattarhalli, 14th KM, Old Madras Road, Bengaluru, Karnataka 560 049, India to No.

13, 21/2 Bhattarhalli, 14th KM, Old Madras Road, Bengaluru, Karnataka 560 049, India April 23, 2013 The address of the registered office of our Company was Administrative convenience changed from No. 13, 21/2 Bhattarhalli, 14th KM, Old Madras Road, Bengaluru, Karnataka 560 049, India to First Floor, No. 21/2 Bhattarhalli, 14th KM, Old Madras Road, Bengaluru, Karnataka 560 049, India September 15, 2016 The address of the registered office of our Company was Administrative convenience changed from First Floor, No. 21/2 Bhattarhalli, 14th KM, Old Madras Road, Bengaluru, Karnataka 560 049, India to No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru, Karnataka 560 048, India** * The resolution passed by our Board in relation to change in address of the registered office of the Company are untraceable. Accordingly, we have relied on other corporate records maintained by our Company and the search report dated May 17, 2025, prepared by Prathibha Priya & Associates, Company Secretaries. For details, see “Risk Factors – We are unable to trace certain of our historical corporate and secretarial records including forms filed with the RoC. We cannot assure you that regulatory proceedings or actions will not be initiated against us in the future which may impact our financial condition and reputation and we will not be subject to any penalty imposed by the competent regulatory authority in this regard.” on page 77.

**Pursuant to a clarification letter dated September 21, 2025 submitted to the RoC, the registered address of our registered office was changed to Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru, Karnataka 560 048, India with effect from August 12, 2025.

335Main objects of our Company

The main objects contained in our Memorandum of Association are set forth below: “1. To manufacture and otherwise carry on the business of developing, designing precision turned, Machined products, components or parts relating to automobile, aerospace, general engineering, hydraulic and pneumatic uses, applications and industries.

2. To carry on the business of developing, designing and / or manufacturing alloy based products, components or parts, forgings and castings relating to automobile, aerospace, general engineering, hydraulic and pneumatic uses, applications and industries.

3. To carry on the business, profession, vocation of industrial engineering, consultants, advisors, and to investigate into and report and advise on and assist in the preparation of any industrial or engineering products, to undertake collection and preparation of the relevant statistics, information and data and to acquire, collect, formulate and prepare the technical details, specifications, drawings, plans, blue prints for fabrication or manufacture of any machinery, machine parts, plant, components or accessories of any particular design, shape or material and to act as industrial consultants, engineering consultants, business consultants and to carry on business of providing all types of consultancy business connected with the industry and trade.

4. To carry on the business of developing, designing, manufacturing, buying, selling or otherwise dealing in highly precision equipments and engineering products including components and other systems and their accessories.

and Database development, both in India and abroad.” Amendments to the Memorandum of Association in the last 10 years Set out below are the amendments to the Memorandum of Association in the last 10 years immediately preceding

the date of this Prospectus:

Date of Shareholders’ Details of amendments resolution December 24, 2015 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 1,217,500,000 divided into 121,750,000 Equity Shares of ₹ 10 each to ₹ 1,497,500,000 divided into 149,750,000 Equity Shares of ₹ 10 each March 23, 2016 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 1,497,500,000 divided into 149,750,000 Equity Shares of ₹ 10 each to ₹ 1,567,500,000 divided into 156,750,000 Equity Shares of ₹ 10 each July 14, 2016 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 1,567,500,000 divided into 156,750,000 Equity Shares of ₹ 10 each to ₹ 1,568,000,000 divided into 156,800,000 Equity Shares of ₹ 10 each December 8, 2016 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 1,568,000,000 divided into 156,800,000 Equity Shares of ₹ 10 each to ₹ 1,801,800,000 divided into 180,180,000 Equity Shares of ₹ 10 each June 24, 2017 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 1,801,800,000 divided into 180,180,000 Equity Shares of ₹ 10 each to ₹ 1,895,400,000 divided into 189,540,000 Equity Shares of ₹ 10 each October 6, 2017 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 1,895,400,000 divided into 189,540,000 Equity Shares of ₹ 10 each to ₹ 1,972,400,000 divided into 197,240,000 Equity Shares of ₹ 10 each November 30, 2017 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 1,972,400,000 divided into 197,240,000 Equity Shares of ₹ 10 each to ₹ 1,992,300,000 divided into 199,230,000 Equity Shares of ₹ 10 each October 12, 2018 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 1,992,300,000 divided into 199,230,000 Equity Shares of ₹ 10 each to ₹ 2,292,300,000 divided into 229,230,000 Equity Shares of ₹ 10 each November 15, 2018 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 2,292,300,000 divided into 229,230,000 Equity Shares of ₹ 10 each to ₹ 2,442,300,000 divided into 244,230,000 Equity Shares of ₹ 10 each October 30, 2019 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 2,442,300,000 divided into 244,230,000 Equity Shares of ₹ 10 each to ₹ 2,661,940,860 divided into 266,194,086 Equity Shares of ₹ 10 each December 31, 2020 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 2,661,940,860 divided into 266,194,086 Equity Shares of ₹ 10 each to ₹ 2,862,500,000 divided into 286,250,000 Equity Shares of ₹ 10 each 336Date of Shareholders’ Details of amendments resolution November 6, 2021 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 2,862,500,000 divided into 286,250,000 Equity Shares of ₹ 10 each to ₹ 4,314,600,000 divided into 431,460,000 Equity Shares of ₹ 10 each February 10, 2023 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 4,314,600,000 divided into 431,460,000 Equity Shares of ₹ 10 each to ₹ 5,914,600,000 divided into 431,460,000 Equity Shares of ₹ 10 each and 160,000,000 preference shares of ₹ 10 each September 11, 2023 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 5,914,600,000 divided into 431,460,000 Equity Shares of ₹ 10 each and 160,000,000 preference shares of ₹ 10 each to ₹ 7,581,600,000 divided into 431,460,000 Equity Shares of ₹ 10 each and 326,700,000 preference shares of ₹ 10 each October 11, 2023 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 7,581,600,000 divided into 431,460,000 Equity Shares of ₹ 10 each and 326,700,000 preference shares of ₹ 10 each to ₹ 8,181,600,000 divided into 431,460,000 Equity Shares of ₹ 10 each and 386,700,000 preference shares of ₹ 10 each October 25, 2023 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 8,181,600,000 divided into 431,460,000 Equity Shares of ₹ 10 each and 386,700,000 preference shares of ₹ 10 each to ₹ 8,403,600,000 divided into 431,460,000 Equity Shares of ₹ 10 each and 408,900,000 preference shares of ₹ 10 each March 29, 2025 Clause V of the Memorandum of Association was amended to reflect the increase in the authorised share capital from ₹ 8,403,600,000 divided into 431,460,000 Equity Shares of ₹ 10 each and 408,900,000 preference shares of ₹ 10 each to ₹ 10,146,299,340 divided into 605,729,934 Equity Shares of ₹ 10 each and 408,900,000 preference shares of ₹ 10 each April 25, 2025 Clause I of the Memorandum of Association was amended to reflect the change of name of our Company from ‘Aequs Private Limited’ to ‘Aequs Limited’ May 13, 2025 Clause V of the Memorandum of Association was amended to reflect the reclassification of the authorised share capital from ₹ 10,146,299,340 divided into 605,729,934 Equity Shares of ₹ 10 each and 408,900,000 preference shares of ₹ 10 each to ₹ 10,146,299,340 divided into 1,014,629,934 Equity Shares of ₹ 10 each Major events and milestones of our Company

The table below sets forth some of the major events in the history of our Company and Subsidiaries:

Calendar Year Events 2008 Establishment of unit in sector specific SEZ for precision engineering at Belagavi by Aequs SEZ Private Limited (formerly known as Quest SEZ Development Private Limited) 2015 Acquisition of Aequs Aero Machine Inc. (formerly known as T&K Machine, Inc.) by one of our Subsidiaries, Aequs Aerospace LLC, USA 2016 Expansion into Europe through acquisition of SIRA Group by one of our Subsidiaries, Aequs Holdings France SAS Delivered our first consignment of plastic toys and commenced operations of consumer manufacturing facilities in Belagavi 2019 Inauguration of flexible manufacturing system at our unit in Aequs SEZ, extending our operations for soft metal machining of aero parts 2021 Commencement of manufacturing of consumer durable goods in Bengaluru Setting up the Koppal Manufacturing Cluster comprising Aequs Toys Private Limited, Koppal Toys Molding COE Private Limited and Aequs Rajas Extrusion Private Limited Setting up the Hubballi Manufacturing Cluster 2022 Invitation extended by Boeing Commercial Airplanes to ASMIPL to join the Boeing Premier Bidder Program Commencement of operations at the Hubballi Manufacturing Cluster 2025 Commencement of commercial production of laptop bottom base units at the Hubballi Manufacturing Cluster by ACPPL Key awards, accreditations and recognitions Calendar Year Events 2016 ‘Innovation Award’ by Airbus ‘D2P Class B’ award by Airbus 2017 ‘D2P 2017’ recognition for support to Airbus Programmes successes 2018 ‘D2P Class B Challenger’ award by Airbus 2020 ‘Casing Industrialisation Award’ by Safran D2P 2020 recognition for support to Airbus Programmes successes 337Calendar Year Events 2021 ‘D2P Challenger Award’ by Airbus 2022 ‘Flawless Project Execution Award’ by Collins Aerospace at the Advanced Structures Asia Supplier Meet 2022 ‘Premier Award’ to Aequs Aero Machine Inc. by Raytheon Technologies, for its performance in 2021 ‘Excellence in Component Manufacturing (Aerospace)’ at the News 18 Business Leaders and Excellence Awards, 2022 2023 ‘D2P Supplier Award 2023’ by Airbus 2024 ‘Best Ecosystem Accelerator Award – Manufacturing/OEM’s’ (shared with Airbus) by the Federation of the Indian Chambers of Commerce and Industry ‘SQIP Award - Supplier Chain & Quality Improvement Program’ by Airbus ‘Special Award’ for procurement operations (material & parts) by Airbus ‘Ramp-up Champion Award’ for outstanding contribution to the Airbus ramp-up at the Global Supplier Conference 2024 Recognized as one of the ‘Top 75 Innovative Companies in India’ by the Confederation of Indian Industry (CII) at the CII Industrial Innovation Awards, 2024 ‘Best Performer’ recognition to SQuAD Forging India Private Limited by Safran Landing Systems 2025 ‘Ecosystem Enabler Award’ at Invest Karnataka 2025 for establishing the largest number of manufacturing clusters in emerging industrial regions, from the Commerce and Industries Department, Government of Karnataka ‘Health & Safety Excellence’ award at the ESG Summit 2025 ‘SQIP Award - Best Performer’ by Airbus ‘Golden Peacock Innovative Product/Service Award’ received by Aequs SEZ Private Limited Nadcap certification awarded to SQuAD Forging India Private Limited under Aequs SEZ Private Limited For further details of the key awards, accreditations and recognitions received by our Company, see “Our Business – Awards” on page 322.

Significant financial and strategic partnerships As on the date of this Prospectus, our Company does not have any significant financial or strategic partnerships, other than in the ordinary course of our business.

Time/ cost overrun We require a number of regulatory permits, licenses and approvals in respect of our business operations. For details, see “Government and Other Approvals” on page 586. We have, from time to time, experienced certain delays in completion of our business operations. Such time/ cost overruns are in the ordinary course of our business and may involve risks and uncertainties, including those discussed in “Risk Factors – Our success depends on our ability to develop new products within the Aerospace Segment and Consumer Segment in accordance with our customers’ niche requirements, in a timely manner. If our design, engineering and development, and execution efforts do not succeed in a timely manner or at all, or if the products we develop do not perform as expected, our business, financial condition, results of operations and cash flows could be adversely affected.” on page 84.

Capacity/ facility creation or location of plants For details regarding capacity/ facility creation and location of plants of our Company, see “- Major events and milestones of our Company” on page 337.

Defaults or rescheduling/ restructuring of borrowings with financial institutions/ banks As on the date of this Prospectus, there has been no instance of defaults or rescheduling/ restructuring of borrowings availed by our Company with financial institutions/ banks.

Guarantees provided to third parties by our Promoters offering their Equity Shares in the Offer for Sale Our Promoter Selling Shareholders have not provided any guarantees on behalf of our Company, as on the date of this Prospectus.

Launch of key products or services, entry in new geographies or exit from existing markets, capacity/ facility creation or location of plants 338For details of key products or services launched by our Company, entry into new geographies or exit from existing markets, capacity/ facility creation, location of our manufacturing facilities, see “Our Business” and “– Major events and milestones” on pages 288 and 337, respectively.

Details regarding material acquisitions or divestments of business/ undertakings, mergers, amalgamation, any revaluation of assets, etc. in the last 10 years Except as set out below, our Company has not made any material acquisitions or divestments of business/ undertakings, mergers, amalgamation, any revaluation of assets, etc. in the last 10 years preceding the date of this Prospectus.

Share purchase agreement dated July 14, 2021 entered into between our Company, Saab AB (publ) and Aerostructures Assemblies India Private Limited (“Saab SPA”) Our Company has executed the Saab SPA with Saab AB (publ) and our wholly-owned Subsidiary, Aerostructures Assemblies India Private Limited, on July 14, 2021 pursuant to which Saab A (publ) sold 7,503,808 equity shares aggregating to 26% of the equity share capital of Aerostructures Assemblies India Private Limited to our Company for a consideration of ₹ 25.10 million. The consideration for such transaction was determined in accordance with the valuation report dated May 18, 2021, issued by Fedex Securities Private Limited (“Valuation Report”).

Pursuant to the Valuation Report, the value per equity share bearing face value of ₹ 10 as on February 28, 2021, was determined as ₹ 8.90 per equity share. In accordance with the provisions of Section 53 of the Companies Act 2013, the recommended value of each equity share for the allotment was determined to be ₹ 10, i.e., the nominal value of the equity shares, since the value per equity share determined through the Valuation Report (i.e., ₹ 8.90) was lesser than the nominal value of the equity share. The Saab SPA also sets forth certain conditions for the consummation of the transaction, inter alia, obtaining the necessary approvals, surrendering original share certificates etc. Pursuant to such acquisition, AAI became a subsidiary of our Company. Neither our Promoters nor any of our Directors are related to Saab AB (publ). For further details, see “Our Subsidiaries and Joint Ventures – Aerostructures Assemblies India Private Limited” on page 344.

Acquisition of Aequs Aero Machine Inc.

One of our Subsidiaries, Aequs Aerospace LLC, USA, pursuant to a stock purchase agreement dated June 2, 2015, entered into with Stonehenge Capital Fund Texas, LP, Advantage Capital Community Development Fund LLC, Texas ACP I LP, T&K Machine Inc. and other shareholders of Aequs Aero Machine Inc. (formerly known as T&K Machine Inc.) (the “Sellers”) purchased 100% of the share capital of Aequs Aero Machine Inc. from the Sellers for a consideration of USD 5.00 million with effect from June 2, 2015. No valuation report was obtained for this acquisition and neither our Promoters nor any of our Directors are related to the Sellers.

Acquisition of SIRA Group One of our Subsidiaries, Aequs Holdings France SAS, pursuant to a share purchase agreement dated January 14, 2016, entered into with Alain Blevin, Jean-Robert Martin, FCPR MBO Capital 2 and Arkea Capital Investissement (the “Sellers”) purchased 100% of the share capital of SIRA, a simplified joint stock company, along with its direct and indirect subsidiaries (“SIRA Group”), from the Sellers for a consideration of EUR 6.01 million with effect from January 14, 2016. No valuation report was obtained for this acquisition and neither our Promoters nor any of our Directors are related to the Sellers.

Summary of key agreements Except in the ordinary course of business and as disclosed in “– Details of shareholders’ agreements” on page 340, there are no agreements/ arrangements and clauses/ covenants entered into by the Shareholders, Promoters, members of the Promoter Group, Group Company, related parties, Directors, Key Managerial Personnel, employees of our Company and Subsidiaries, among themselves or with our Company or with a third party, solely or jointly, which, (i) either directly or indirectly or potentially or whose purpose and effect is to, (a) impact the management or control of our Company or (b) other than in the ordinary course of business, impose any restriction or create any liability upon our Company, or (ii) are material and which need to be disclosed or non-disclosure of which may have a bearing on the investment decision of prospective investors in connection with the Offer, including any rescission, amendment or alteration of such agreements, whether or not our Company is a party to

such agreements:

Trademark license agreement dated December 1, 2020 by and among MFO IP Holdings Limited (formerly known as Aequs Limited, Malta) (the “Licensor”) and our Company (the “Licensee”, together with the 339Licensor, the “Parties”) read with the amendment agreement dated October 1, 2022 and supersession understanding dated January 1, 2024 (together “Trademark Agreement”) The Parties have entered into the Trademark Agreement with respect to the trade name and trademark “Aequs” and its related trademarks and such other logos as may be published from time to time, including the logo and tagline (“Trademarks”). Pursuant to the Trademark Agreement, the Licensor has granted to the Licensee a worldwide, exclusive, perpetual and non-transferable license to use the Trademark solely in connection with the conduct of the business activities of the Licensee and its Subsidiaries, and in connection with marketing the products, services, websites and promotional materials of the business activities of the Licensee, with effect from December 1, 2020. The Licensee is required to pay a license fee to the Licensor for usage of the Trademarks, which shall be derived based on the revenue from operations of the Licensee, as agreed upon in the Trademark Agreement. However, pursuant to the supersession understanding dated January 1, 2024 entered into between the Parties, it was agreed that for a period of five years with effect from April 1, 2023, the only and valid consideration for usage of the Trademarks would be reimbursement by the Licensee of the marketing expenses of the Licensor for an amount not exceeding ₹ 10.00 million per annum.

Details of shareholders’ agreements Except as set out below, our Company, Promoters and Shareholders do not have any inter-se agreements/ arrangements and clauses / covenants which are material in nature and which need to be disclosed, and that there are no other clauses / covenants which are adverse / pre-judicial to the interest of the minority / public shareholders as on the date of this Prospectus. Also, there are no other agreements, deed of assignments, acquisition agreements, shareholders’ agreement, inter-se agreements, agreements of like nature, other than disclosed in this Prospectus.

Shareholders’ agreement dated October 12, 2023, read with supplementary letter dated October 27, 2023, amendement agreement dated February 18, 2025 and the amendment and termination agreement dated May 12, 2025, entered into by and among our Company, Aequs Manufacturing Investments Private Limited, Melligeri Private Family Foundation, Aravind Shivaputrappa Melligeri, Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II, Amansa Investments Limited, Catamaran Ekam (acting through its trustee, Catamaran Advisors LLP), Steadview Capital Mauritius Limited, Sparta Group LLC, Ravindra K Mariwala, Vasundhara Dempo Family Private Trust, Girija Dempo Family Private Trust, Mukul Mahavir Agrawal and certain other Shareholders (collectively the “SHA Parties”) (“SHA”) The SHA sets out the inter se rights and obligations of the SHA Parties. In accordance with the terms of the SHA, Aequs Manufacturing Investments Private Limited, Melligeri Private Family Foundation (together, the “SHA Promoters”), Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II, Amansa Investments Limited, Ravindra K Mariwala, Vasundhara Dempo Family Private Trust, Girija Dempo Family Private Trust (together, the “Category I Investors”) and Steadview Capital Mauritius Limited, Sparta Group LLC (together, the “SS Investor Group”) are granted certain customary rights including,

(i) the right to appoint observers and directors on the Board of Directors (pursuant to which the SHA Promoters have appointed one Director on the Board); (ii) quorum rights; (iii) voting rights; (iv) restrictions on transfer of Equity Shares including the right of first offer, (v) tag-along rights; (vi) pre-emptive and anti-dilution rights; (vii) information rights; and (viii) certain exit rights.

Subsequently, pursuant to the amendment and termination agreement dated May 12, 2025 (“Amendment and Termination Agreement”), the relevant SHA Parties (to the extent applicable to relevant SHA Party in accordance with the provisions of the SHA) have, to facilitate the Offer, (i) amended certain provisions of the shareholders’ agreement dated October 12, 2023, read with supplementary letter dated October 27, 2023 and amendment agreement dated February 18, 2025; (ii) waived certain rights that may be triggered as a result of our Company undertaking the Offer; (iii) consented to certain matters relating to the Offer; and (iv) agreed that the shareholders’ agreement dated October 12, 2023, read with supplementary letter dated October 27, 2023 and amendment agreement dated February 18, 2025 and the special rights provided therein will terminate upon the commencement of listing and trading of the Equity Shares on the Stock Exchanges. Further, the SHA Parties have agreed that Part B of the Articles of Association and the special rights provided therein shall automatically cease to have any force and effect and shall stand deleted upon the commencement of listing and trading of the Equity Shares on the Stock Exchanges or such earlier date as prescribed by SEBI. The Amendment and Termination

Agreement shall terminate either: (i) upon termination of the SHA; or (ii) if the listing of the Equity Shares pursuant to the Offer is not completed on or before 18 months from the date of receipt of final observations from SEBI; or (iii) the date on which the Board decides not to undertake the Offer or to withdraw any offer document filed with any regulatory authority in respect of the Offer, including any draft offer document filed with SEBI; or

(iv) such other date as agreed amongst the SHA Parties in writing.

340Share purchase agreement dated December 2, 2021, entered into between our Company and Aequs Manufacturing Investments Private Limited (“SPA”) Our Company has executed the SPA with our Corporate Promoter, Aequs Manufacturing Investments Private Limited, on December 2, 2021 pursuant to which Aequs Manufacturing Investments Private Limited sold (i) 7,117,373 equity shares held in Aequs Consumer Products Private Limited, (ii) 32,087,355 equity shares in Aequs Force Consumer Products Private Limited and (iii) 92,093,337 equity shares in Aequs Engineered Plastics Private Limited for a consideration of 54,840,368 Equity Shares bearing face value of value of ₹ 10 each, being issued and allotted to AMIPL by our Company as per the terms of the SPA. The consideration for such transaction was determined in accordance with the valuation report dated October 22, 2021, issued by BDO Valuation Advisory LLP (“Valuation Report”). Pursuant to the Valuation Report, the value per Equity Share as on August 31, 2021, was determined as ₹ 26.10. The SPA also sets forth certain conditions for the consummation of the transaction, inter alia, obtaining the necessary approvals, surrendering original share certificates, payment of taxes etc.

Our holding company As on the date of this Prospectus, our Corporate Promoter, Aequs Manufacturing Investments Private Limited is our holding company. For details regarding the corporate information and nature of business of Aequs Manufacturing Investments Private Limited, please see “Our Promoters and Promoter Group – Details of our Promoters - Aequs Manufacturing Investments Private Limited” on page 377.

Our Subsidiaries and Joint Ventures As on the date of this Prospectus, we have 16 Subsidiaries and three Joint Ventures. For further details, see “Our Subsidiaries and Joint Ventures” on page 342.

Agreements with Key Managerial Personnel, Senior Management, Promoters, Directors or any other employee As on date of this Prospectus, there are no agreements entered into by our Key Managerial Personnel, Senior Management, Promoters or Directors or any other employee of our Company, either by themselves or on behalf of any other person, with any shareholder or any other third party with regard to compensation or profit sharing in connection with dealings in the securities of our Company.

341OUR SUBSIDIARIES AND JOINT VENTURES Set forth below is the list of direct Subsidiaries, step-down Subsidiaries and Joint Ventures of our Company, as

on the date of this Prospectus:

Category Number of entities Names Direct Subsidiaries 9 Indian Subsidiaries

1. AeroStructures Manufacturing India Private Limited;

2. Aerospace Manufacturing Holdings Private Limited;

3. Aerostructures Assemblies India Private Limited;

4. Aequs Force Consumer Products Private Limited;

5. Aequs Consumer Products Private Limited;

6. Aequs Toys Private Limited; and

7. Aequs Engineered Plastics Private Limited.

Foreign Subsidiaries

1. Aequs Oil & Gas LLC; and

2. Aequs Aerospace B.V.

Step-down Subsidiaries 7 Indian Subsidiaries

1. Aequs Rajas Extrusion Private Limited; and

2. Koppal Toys Molding COE Private Limited.

Foreign Subsidiaries

1. Aequs Aerospace LLC, USA;

2. Aequs Aero Machine Inc.;

3. Aequs Holdings France SAS;

4. Aequs Aerospace France SAS; and

5. Aequs Toys Hong Kong Private Limited*.

Joint Ventures 3 1. Aerospace Processing India Private Limited;

2. SQuAD Forging India Private Limited; and

3. Aequs Cookware Private Limited. * The sole director of ATHPL through resolution dated July 15, 2025 has approved the process of winding up of ATHPL and appointment of liquidators in this regard.

I. Direct Subsidiaries Indian Subsidiaries

1. AeroStructures Manufacturing India Private Limited Corporate information AeroStructures Manufacturing India Private Limited (“ASMIPL”) was incorporated as a private limited company on February 7, 2013 under the Companies Act, 1956, with the RoC. The registered office of ASMIPL is at Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru 560 048, Karnataka, India. Its CIN is U29253KA2013PTC067763.

Nature of business ASMIPL is authorized to engage inter alia in the business of manufacturers, producers, developers, traders, buyers, sellers, exporters, importers, operators, engineers, fabricators, contractors, sub-contractors, brokers, assemblers, packers, re-packers, jobbers, laminators, merchants, resellers, dealers, distributors, converters, recyclers with respect to machining, sheet metal fabrication work and/or minor component assemblies (such as nut plates, press bearings) of aerostructure parts and specifically excludes assemblies other than minor component assemblies and also excludes actuation business.

Capital structure As on date of this Prospectus, the details of the capital structure of ASMIPL is as follows:

342Particulars Aggregate nominal value (in ₹) Authorised share capital 48,650,000 equity shares of ₹ 10 each 486,500,000 Issued, subscribed and paid-up capital 48,642,438 equity shares of ₹ 10 each 486,424,380 Shareholding pattern The shareholding pattern of

ASMIPL as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Limited 48,642,437 100.00

2. Rajeev Kaul (as a nominee of Aequs Limited) 1 Negligible Total 48,642,438 100.00 Financial information

Certain key financial indicators of ASMIPL are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Revenue from operations 5,081.83 4,598.27 3,612.12 Reserves 1,969.34 1,615.15 1,064.25 Total income 5,128.54 4,690.01 3,678.12 Profit/(Loss) after tax 334.34 518.79 (160.65) Profit/(Loss) after tax margin (%) 6.58 11.28 (4.45) Earnings per share (Basic) (in ₹) 6.87 10.67 (3.30) Earnings per share (Diluted) (in ₹) 6.87 10.67 (3.30) Accumulated profits or losses There are no accumulated profits or losses of ASMIPL that have not been accounted for by our Company in the Restated Consolidated Financial Information.

2. Aerospace Manufacturing Holdings Private Limited Corporate information Aerospace Manufacturing Holdings Private Limited (“AMHPL”) was incorporated as a private limited company on September 13, 2012 under the Companies Act, 1956, with the RoC. The registered office of AMHPL is at Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru 560 048, Karnataka, India. Its CIN is U65191KA2012PTC065904.

Nature of business AMHPL is authorised to engage inter alia in the business of the investment company in all its branches and to sell, purchase, exchange, subscribe, acquire, undertake, underwrite, hold, auction, convert or other wise to deal in all types of shares, securities, stocks, bonds, fully convertible debentures, partly convertible debentures, non convertible debentures, debentures stocks, warrants, certificate, premium notes, mortgages, obligations, inter corporate deposits, call money deposits, public deposits, commercial paper and other similar instruments whether issued by government, semi government, local authorities, public sector undertakings, companies, corporations, co-operative societies, and other similar originations at national and international levels and to do all incidental acts and things necessary for the attainment of the above objects.

Capital structure As on the date of this Prospectus, the details of the capital structure of AMHPL is as follows:

Particulars Aggregate nominal value (in ₹) Authorised share capital 343Particulars Aggregate nominal value (in ₹) 58,210,300 equity shares of ₹ 10 each 582,103,000 Issued, subscribed and paid-up capital 55,009,359 equity shares of ₹ 10 each 550,093,590 Shareholding pattern

The shareholding pattern of AMHPL as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Limited 55,009,249 100.00

2. Rajeev Kaul (as a nominee of Aequs Limited) 110 Negligible Total 55,009,359 100.00 Financial information

Certain key financial indicators of AMHPL are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Reserves (551.95) (551.37) (517.47) Total income 0.03 0.58 0.33 Profit/(Loss) after tax 2.26 (32.85) (6.51) Earnings per share (Basic) (in ₹) 0.04 (0.60) (0.12) Earnings per share (Diluted) (in ₹) 0.04 (0.60) (0.12) Accumulated profits or losses There are no accumulated profits or losses of AMHPL that have not been accounted for by our Company in the Restated Consolidated Financial Information.

3. Aerostructures Assemblies India Private Limited Corporate information Aerostructures Assemblies India Private Limited (“AAI”) was incorporated as a private limited company on February 8, 2013 under the Companies Act, 1956, with the RoC. The registered office of AAI is at Aequs SEZ, No. 437/A, Hattargi Village, Hukkeri Taluk, Belagavi 591 243, Karnataka, India. Its CIN is U29253KA2013PTC067804.

Nature of business AAI is authorised to engage inter alia in the business of manufacturers, producers, developers, traders, buyers, sellers, exporters, importers, operators, engineers, fabricators, contractors, sub contractors, brokers, assemblers, packers, re-packers, jobbers, designers, laminators, merchants, resellers, dealers, distributors, converters, recyclers, of aerostructure assemblies made out of procured metallic and composite components, and to deal in any manner therewith.

Capital structure As on date of this Prospectus, the details of the capital structure of AAI are as follows:

Particulars Aggregate nominal value (in ₹) Authorised share capital 28,861,000 equity shares of ₹ 10 each 288,610,000 Issued, subscribed and paid-up capital 28,860,802 equity shares of ₹ 10 each 288,608,020 Shareholding pattern

The shareholding pattern of AAI as on the date of this Prospectus is set out below:

344S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Limited 28,860,801 100.00

2. Ravi Mallikarjun Hugar (as a nominee of Aequs 1 Negligible Limited) Total 28,860,802 100.00 Financial information

Certain key financial indicators of AAI are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Revenue from operations 878.69 1,051.40 639.40 Reserves (2.85) (59.20) (175.30) Total income 884.38 1,055.90 638.20 Profit/(Loss) after tax 52.78 112.80 1.90 Profit/(Loss) after tax margin (%) 6.01 10.71 0.30 Earnings per share (Basic) (in ₹) 1.83 3.90 0.07 Earnings per share (Diluted) (in ₹) 1.83 3.90 0.07 Accumulated profits or losses There are no accumulated profits or losses of AAI that have not been accounted for by our Company in the Restated Consolidated Financial Information.

4. Aequs Force Consumer Products Private Limited Corporate information Aequs Force Consumer Products Private Limited (“AFC”) was incorporated as a private limited company on July 19, 2018 under the Companies Act 2013, with the RoC. The registered office of AFC is at Aequs SEZ, No. 437/A, Hattargi Village, Hukkeri Taluk, Belagavi 591 243, Karnataka, India. Its CIN is U28191KA2018PTC114901.

Nature of business AFC is authorised to engage inter alia in the business to manufacture, produce, prepare, assemble, alter, build, brand, mould, convert, commercialize, dismantle, design, develop, dress discover, fit, establish, fabricate, finish, print, repair, recondition, remodel, stretch, stitch, import, export, buy, sell, resale, distribute, display, demonstrate, and to act as agent, broker, franchiser, representative, advisor, consultant, or otherwise to deal in all shapes, sizes, verities, modalities, uses and descriptions of manual, semi-automatic, automatic, electronic, battery operated, eclectically operated, sound operated remote control, mechanical or other sorts of consumer products including toys, monuments, games, articles or things, their components, parts fittings and accessories whether made of plastic, wood, paper, rubber, cloth, clay, ceramic, soil, plaster of paris, metal, glass acrylic, fiber, or other natural or synthetic material or with any combination thereof and to do all incidental acts and things necessary for the attainment of above objects.

Capital structure As on date of this Prospectus, the details of the capital structure of AFC are as follows:

Particulars Aggregate nominal value (in ₹) Authorised share capital 158,000,000 equity shares of ₹ 10 each 1,580,000,000 Issued, subscribed and paid-up capital 157,545,187 equity shares of ₹ 10 each 1,575,451,870 Shareholding pattern

The shareholding pattern of AFC as on the date of this Prospectus is set out below:

345S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Limited 157,545,087 100.00

2. Aequs Engineered Plastics Private Limited 100 Negligible Total 157,545,187 100.00 Financial information

Certain key financial indicators of AFC are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Revenue from operations 211.93 622.57 755.29 Reserves (1,511.41) (1,298.56) (948.74) Total income 276.42 647.66 783.29 Profit/(Loss) after tax (214.28) (246.98) (303.58) Profit/(Loss) after tax margin (%) (101.11) (39.67) (40.19) Earnings per share (Basic) (in ₹) (1.21) (1.58) (2.95) Earnings per share (Diluted) (in ₹) (1.21) (1.58) (2.95) Accumulated profits or losses There are no accumulated profits or losses of AFC that have not been accounted for by our Company in the Restated Consolidated Financial Information.

5. Aequs Consumer Products Private Limited Corporate information Aequs Consumer Products Private Limited (“ACPPL”) was incorporated as a private limited company on October 25, 2019 under the Companies Act 2013, with the RoC. The registered office of ACPPL is at Ground floor, No.55, Whitefield Main Road, Mahadevapura Post, Bengaluru 560 048, Karnataka, India. Its CIN is U28995KA2019PTC129087.

Nature of business ACPPL is authorised under its memorandum of association to engage inter alia in the business of manufacturers, buyers, sellers, dealers, importers, exporters, contractors, factors, agents and suppliers for consumer products including kitchen and home appliances whether made out of polypropylene, ABS, nylon, polystyrene, P.V.C.

polyester strips, plastic powder, thermoplastic and thermosetting polymers, metal including aluminum and such other articles including light and heavy parts, components and accessories for such consumer products and such other articles required to manufacture profile plastic, molded industrial articles, industrial components and articles and auxiliary plastic products, extrusion, injection molding, blow molding, compressor molding, rotational molding, thermoforming, vacuum forming, plastics pellets, plastic luggage articles, components and accessories for consumer products.

Capital structure As on the date of this Prospectus, the details of the capital structure of ACPPL are as follows:

Particulars Aggregate nominal value (in ₹) Authorised share capital 96,000,000 equity shares of ₹ 10 each 960,000,000 Issued, subscribed and paid-up capital 83,510,803 equity shares of ₹ 10 each 835,108,030 Shareholding pattern

The shareholding pattern of ACPPL as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Limited 83,510,802 100.00 346S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

2. Ravi Mallikarjun Hugar (as a nominee of Aequs 1 Negligible Limited) Total 83,510,803 100.00 Financial information

Certain key financial indicators of ACPPL are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Revenue from operations 158.07 311.69 299.39 Reserves 2,166.61 1,223.17 (108.29) Total income 212.72 332.51 299.16 Profit/(Loss) after tax (125.33) (260.30) (177.14) Profit/(Loss) after tax margin (%) (79.29) (83.51) (59.17) Earnings per share (Basic) (in ₹) (1.54) (4.65) (6.54) Earnings per share (Diluted) (in ₹) (1.54) (4.65) (6.54) Accumulated profits or losses There are no accumulated profits or losses of ACPPL that have not been accounted for by our Company in the Restated Consolidated Financial Information.

6. Aequs Toys Private Limited Corporate information Aequs Toys Private Limited (“ATPL”) was incorporated as a private limited company on August 6, 2021, under the Companies Act 2013, with the RoC. The registered office of ATPL is at Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru 560 048, Karnataka, India. Its CIN is U26400KA2021PTC150503.

Nature of business ATPL is authorised under to engage inter alia in the business of manufacturing, exporting, importing, buying, selling, supplying, wholesaling, retailing, preparing, scouring, finishing and to act as job worker, agent, stockiest, distributor, broker, vendor, packer, designer, or otherwise to deal in all shapes, sizes and varieties of toys, handmade and machine made and allied materials or blending thereof.

Capital structure As on the date of this Prospectus, the details of the capital structure of ATPL are as follows:

Particulars Aggregate nominal value (in ₹) Authorised share capital 126,000,000 equity shares of ₹ 10 each 1,260,000,000 Issued, subscribed and paid-up capital 125,959,800 equity shares of ₹ 10 each 1,259,598,000 Shareholding pattern

The shareholding pattern of ATPL as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Limited 125,959,799 100.00

2. Rajeev Kaul 1 Negligible Total 125,959,800 100.00 Financial information

Certain key financial indicators of ATPL are set forth below:

347(in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Revenue from operations 91.40 104.25 43.24 Reserves (697.52) (410.56) (76.38) Total income 137.95 104.51 43.47 Profit/(Loss) after tax (317.17) (396.45) (114.35) Profit/(Loss) after tax margin (%) (347.00) (380.27) (264.46) Earnings per share (Basic) (in ₹) (2.55) (4.59) (2.63) Earnings per share (Diluted) (in ₹) (2.55) (4.59) (2.63) Accumulated profits or losses There are no accumulated profits or losses of ATPL that have not been accounted for by our Company in the Restated Consolidated Financial Information.

7. Aequs Engineered Plastics Private Limited Corporate information Aequs Engineered Plastics Private Limited (“AEPPL”) was incorporated as a private limited company on February 10, 2015, under the Companies Act 2013, with the RoC. The registered office of AEPPL is at Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru 560 048, Karnataka, India. Its CIN is U22209KA2015PTC078777.

Nature of business AEPPL is authorised to engage inter alia in the business of manufacturers, buyers, sellers, dealers, importers, exporters, contractors, factors, agents and suppliers for polythene, polypropylene, ABS, nylon, polystyrene, P.V.C. polyester strips, plastic powder, thermoplastic and thermosetting polymers and such other articles required to manufacture profile plastic, molded industrial articles, industrial components and articles and auxiliary plastic products, extrusion, injection molding, blow molding, compressor molding, rotational molding, thermoforming, vacuum forming, plastics pellets, plastic luggage articles, light and heavy automobile parts, components and accessories for vehicles including aircrafts.

Capital structure As on the date of this Prospectus, the details of the capital structure of AEPPL are as follows:

Particulars Aggregate nominal value (in ₹) Authorised share capital 211,810,000 equity shares of ₹ 10 each 2,118,100,000 Issued, subscribed and paid-up capital 197,615,318 equity shares of ₹ 10 each 1,976,153,180 Shareholding pattern

The shareholding pattern of AEPPL as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Limited 197,615,317 100.00

2. Ravi Mallikarjun Hugar (as a nominee of Aequs 1 Negligible Limited) Total 197,615,318 100.00

Note: AEPPL is in the process of making the necessary form filing with the regulatory authorities in relation to the allotment undertaken on November 21, 2025 to the Company.

Financial information

Certain key financial indicators of AEPPL are set forth below: (in ₹ million, unless specified otherwise) 348Particulars For the Fiscal 2025 2024 2023 Revenue from operations 546.54 1,075.91 1,356.00 Reserves (1,752.05) (1,468.00) (1,378.02) Total income 555.98 1,083.87 1,396.08 Profit/(Loss) after tax (284.74) (97.54) (198.01) Profit/(Loss) after tax margin (%) (52.10) (9.07) (14.60) Earnings per share (Basic) (in ₹) (1.61) (0.57) (1.51) Earnings per share (Diluted) (in ₹) (1.61) (0.57) (1.51) Accumulated profits or losses There are no accumulated profits or losses of AEPPL that have not been accounted for by our Company in the Restated Consolidated Financial Information.

Foreign Subsidiaries

1. Aequs Oil & Gas LLC, USA Corporate information Aequs Oil & Gas LLC, USA (“AOGLLC”) was was incorporated as a limited liability company under the laws of USA on July 21, 2006. The registered office of AOGLLC is at 2220 W Park Street, Paris, Texas 75460, USA.

Its registration number is 0801498629.

Nature of business AOGLLC is authorised to engage in the business of supply of products for drilling and evaluation and completion and production, for major oil and gas services and aerospace companies.

Capital structure Our Company and Melligeri Investments LLC are the record owners of 95% and 5% of the issued and outstanding membership interests in AOGLLC, respectively.

Shareholding pattern

The shareholding pattern of AOGLLC as on the date of this Prospectus is set out below:

Name of the contributor Percentage of total ownership contribution (%) Aequs Limited 95.00 Melligeri Investments LLC 5.00 Total 100.00 Financial information

Certain key financial indicators of AOGLLC are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Reserves (58.88) (56.03) (54.35) Total income 0.02 0.00 0.00 Profit/(Loss) after tax 0.00 (0.07) (2.10) Accumulated profits or losses There are no accumulated profits or losses of AOGLLC that have not been accounted for by our Company in the Restated Consolidated Financial Information.

3492. Aequs Aerospace B.V.

Corporate information Aequs Aerospace B.V. (“AABV”) was incorporated as a private company with limited liability under the laws of Netherlands on August 22, 2014. The registered office of AABV is at Joop Geesink 701, Rembrandt room, 1114AB, Amsterdam-Duivendrecht. Its registration number is 61294225 and it is registered with the Trade Register, as maintained by the Chamber of Commerce in Netherlands.

Nature of business AABV is authorised to engage in the business of investments in the aerospace sector particularly in Europe as authorized under the constitutional documents.

Capital structure As on the date of this Prospectus, the details of the capital structure of AABV are as follows:

Particulars Aggregate nominal value (in EUR) Issued and subscribed capital 14,190,000 shares of EUR 1 each 14,190,000 Paid-up capital 13,750,000 shares of EUR 1 each 13,750,000 Shareholding pattern

The shareholding pattern of AABV as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of ordinary shares Percentage of bearing face value of EUR 1 shareholding (%) each

1. Aequs Limited 10,840,000 76.00

2. AeroStructures Manufacturing India Private Limited 3,350,000 24.00 Total 14,190,000 100.00 Financial information

Certain key financial indicators of AABV are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Reserves (2,937.49) (1,416.48) (626.73) Total income 57.59 63.66 53.09 Profit/(Loss) after tax (1,481.74) (279.26) (114.43) Earnings per share (Basic) (in ₹) (107.76) (20.31) (14.30) Earnings per share (Diluted) (in ₹) (107.76) (20.31) (14.30) Accumulated profits or losses There are no accumulated profits or losses of AABV that have not been accounted for by our Company in the Restated Consolidated Financial Information.

II. Step-down Subsidiaries Indian Subsidiaries

1. Aequs Rajas Extrusion Private Limited Corporate information Aequs Rajas Extrusion Private Limited (“AREPL”) was incorporated as a private limited company on June 25, 2021 under the Companies Act 2013 with the RoC. The registered office of AREPL is at Aequs Tower, No. 55, 350Whitefield Main Road, Mahadevapura Post, Bengaluru 560 048, Karnataka, India. Its CIN is U25200KA2021PTC148763.

Nature of business AREPL is authorised to engage inter alia in the business to manufacture and sell all sorts of products manufactured by plastic extrusion process and to produce, prepare, assemble, alter, distribute, display and to act as agent, broker, franchiser, representative, advisor, consultant, or otherwise to deal in all sorts of extruded products in toys and consumer goods sector.

Capital structure As on date of this Prospectus, the details of the capital structure of AREPL are as follows:

Particulars Aggregate nominal value (in ₹) Authorised share capital 150,000 equity shares of ₹ 10 each 1,500,000 Issued, subscribed and paid-up capital 28,400 equity shares of ₹ 10 each 284,000 Shareholding pattern

The shareholding pattern of AREPL as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Toys Private Limited 28,399 100.00

2. Ravi Mallikarjun Hugar (as a nominee of Aequs 1 Negligible Toys Private Limited) Total 28,400 100.00 Financial information

Certain key financial indicators of AREPL are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Reserves (6.44) (4.66) (2.83) Profit/(Loss) after tax (1.78) (1.83) (2.12) Earnings per share (Basic) (in ₹) (62.76) (64.35) (74.78) Earnings per share (Diluted) (in ₹) (62.76) (64.35) (74.78) Accumulated profits or losses There are no accumulated profits or losses of AREPL that have not been accounted for by our Company in the Restated Consolidated Financial Information.

2. Koppal Toys Molding COE Private Limited Corporate information Koppal Toys Molding COE Private Limited (“KTMPL”) was incorporated as a private limited company on August 16, 2021 under the Companies Act 2013 with the RoC. The registered office of KTMPL is at Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru 560 048, Karnataka, India. Its CIN is U36999KA2021PTC150753.

Nature of business KTMPL is authorised to engage inter alia in the business of manufacturing and molding of all kinds of toys and toy products and to produce, prepare, assemble, alter, build, brand, mold, convert, commercialize, dismantle, design, develop, dress, discover, fit, establish, fabricate, finish, print, repair, recondition, remodel, stretch, stitch, import, export, buy, sell, resale, distribute, display, demonstrate, and to act as agent, broker, franchiser, 351representative, advisor, consultant, or otherwise to deal in all sorts of manufacturing and molding of products in toys sector.

Capital structure As on date of this Prospectus, the details of the capital structure of KTMPL are as follows:

Particulars Aggregate nominal value (in ₹) Authorised share capital 48,000,000 equity shares of ₹ 10 each 480,000,000 Issued, subscribed and paid-up capital 47,617,623 equity shares of ₹ 10 each 476,176,230 Shareholding pattern

The shareholding pattern of KTMPL as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Toys Private Limited 47,617,622 100.00

2. Ravi Mallikarjun Hugar (as a nominee of Aequs 1 Negligible Toys Private Limited) Total 47,617,623 100.00 Financial information

Certain key financial indicators of KTMPL are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Revenue from operations 24.16 19.01 2.72 Reserves (193.41) (97.43) (54.42) Total income 74.60 19.02 2.72 Profit/(Loss) after tax (96.09) (149.17) (58.96) Profit/(Loss) after tax margin (%) (397.78) (784.69) (2,167.65) Earnings per share (Basic) (in ₹) (2.06) (4.69) (0.65) Earnings per share (Diluted) (in ₹) (2.06) (4.69) (0.65) Accumulated profits or losses There are no accumulated profits or losses of KTMPL that have not been accounted for by our Company in the Restated Consolidated Financial Information.

Foreign Subsidiaries

1. Aequs Aerospace LLC, USA Corporate information Aequs Aerospace LLC, USA (“AALLC”) was incorporated as a limited liability company under the laws of State of Delaware on January 13, 2015. The registered office of AALLC is at 2220 W Park ST Paris, TX 75460. Its registration number is 5673441.

Nature of business AALLC is authorised to engage in the business of investments in the aerospace sector, particularly, in North America.

Capital structure AALLC being a limited liability company, does not have any share capital.

352Shareholding pattern

The shareholding pattern of AALLC as on the date of this Prospectus is set out below:

Name of the contributor Percentage of total ownership contribution (%) AeroStructures Manufacturing India Private Limited 100.00 Total 100.00 Financial information

Certain key financial indicators of AALLC are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Reserves (220.33) (207.82) (208.93) Total income 9.55 (33.12) 0.92 Profit/(Loss) after tax (8.65) (6.84) 2.73 Profit/(Loss) after tax margin (%) N.A. N.A. N.A.

Accumulated profits or losses There are no accumulated profits or losses of AALLC that have not been accounted for by our Company in the Restated Consolidated Financial Information.

2. Aequs Aero Machine Inc.

Corporate information Aequs Aero Machine Inc. (“AAM”) was incorporated under the laws of the state of Texas, USA on October 31,

1968. The registered office of AAM is at 2220 Park Street, Paris Texas, 75460. Its registration number is

25317400.

Nature of business AAM is primarily engaged in the business of manufacturing aerospace parts.

Capital structure As on date of this Prospectus, the details of the capital structure of AAM are as follows:

Particulars Aggregate nominal value (in USD) Authorised share capital 1,000 shares of USD 0.01 each 10 Issued, subscribed and paid-up capital 1,000 shares of USD 0.01 each 10 Shareholding pattern

The shareholding pattern of AAM as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of common stock of Percentage of USD 0.01 per share shareholding (%)

1. Aequs Aerospace LLC, USA 1,000 100.00 Total 1,000 100.00 Financial information

Certain key financial indicators of AAM are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Revenue from operations 1,189.17 1,106.16 669.90 353Particulars For the Fiscal 2025 2024 2023 Reserves 161.68 177.49 148.80 Total income 1,234.13 1,146.88 755.57 Profit/(Loss) after tax (20.66) 25.86 (134.00) Profit/(Loss) after tax margin (%) (1.74) 2.34 (20.00) Earnings per share (Basic) (in ₹) (0.16) 0.03 (0.11) Earnings per share (Diluted) (in ₹) (0.16) 0.03 (0.11) Accumulated profits or losses There are no accumulated profits or losses of AAM that have not been accounted for by our Company in the Restated Consolidated Financial Information.

3. Aequs Holdings France SAS Corporate information Aequs Holdings France SAS (“AHF”) was incorporated as a simplified joint stock company with limited liability under the laws of France on November 26, 2016. The registered office of AHF is at Zone Industrielle de l’Appentière 49280 Mazieres-En-Mauges. Its registration number is 817 785 405, with the Registre National des Enterprises.

Nature of business AHF is authorised to engage in the business of commercial, administrative, organisational or advisory services, creation, investing and holding companies engaged in any type of activity, in particular commercial, industrial, real estate and service activities, and, in general, all industrial, financial, commercial, civil, real estate or movable property transactions, or participation in any company or firm in France or abroad, whether existing or to be created, which is directly or indirectly related to its objects and to any similar or related object, or which may facilitate its expansion or development or contribute to its objects, in particular by means of the creation of new companies, contributions, mergers, alliances or joint ventures.

Capital structure As on the date of this Prospectus, the details of the capital structure of AHF are as follows:

Particulars Aggregate nominal value (in EUR) Authorised share capital 1,000 shares of EUR 1 each 1,000 Issued, subscribed and paid-up capital 1,000 shares of EUR 1 each 1,000 Shareholding pattern

The shareholding pattern of AHF as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of shares ordinary Percentage of bearing face value of EUR 1 shareholding (%) each

1. Aequs Aerospace B.V. 1,000 100.00 Total 1,000 100.00 Financial information

Certain key financial indicators of AHF are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Revenue from operations 2.62 1.73 1.67 Reserves (6.29) (1,451.84) (1,378.32) Total income 107.80 19.67 1.67 Profit/(Loss) after tax 49.45 (62.45) (56.60) 354Particulars For the Fiscal 2025 2024 2023 Profit/(Loss) after tax margin (%) 1,886.36 (3,604.38) (3,386.88) Earnings per share (Basic) (in ₹) N.A. N.A. N.A.

Earnings per share (Diluted) (in ₹) N.A. N.A. N.A.

Accumulated profits or losses There are no accumulated profits or losses of AHF that have not been accounted for by our Company in the Restated Consolidated Financial Information.

4. Aequs Aerospace France SAS Corporate information Aequs Aerospace France SAS (“AAF”) was incorporated under the laws of France on January 12, 2017. The registered office of AAF is at Zone Industrielle de l’Appentière 49280 Mazieres-En-Mauges. Its registration number is 490 362 241.

Nature of business AAF is authorised to primarily engage in the business of industrial engineering, and in particular, manufacture of mechanical parts for the civil and military aeronautics market.

Capital structure As on the date of this Prospectus, the details of the capital structure of AAF are as follows:

Particulars Aggregate nominal value (in EUR) Authorised share capital 2,043,060 shares of EUR 2.48 each 5,066,788.80 Issued, subscribed and paid-up capital 2,043,060 shares of EUR 2.48 each 5,066,788.80 Shareholding pattern

The shareholding pattern of AAF as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of shares bearing face Percentage of value of EUR 2.48 each shareholding (%)

1. Aequs Aerospace B.V. 1,574,140 77.05

2. Aequs Holdings France SAS 468,920 22.95 Total 2,043,060 100.00 Financial information

Certain key financial indicators of AAF are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Revenue from operations 1,090.73 819.85 595.16 Reserves (331.24) (374.93) (542.33) Total income 1,318.19 1,629.88 680.45 Profit/(Loss) after tax 41.00 54.65 (79.71) Profit/(Loss) after tax margin (%) 3.76 6.67 (13.39) Earnings per share (Basic) (in ₹) N.A. N.A. N.A.

Earnings per share (Diluted) (in ₹) N.A. N.A. N.A.

Accumulated profits or losses There are no accumulated profits or losses of AAF that have not been accounted for by our Company in the Restated Consolidated Financial Information.

3555. Aequs Toys Hong Kong Private Limited Corporate information* Aequs Toys Hong Kong Private Limited (“ATHPL”) was incorporated as a limited company limited under the laws of Hong Kong on July 2, 2021. The registered office of ATHPL is at 17/F, Beautiful Group Tower 77, Connaught Road Central, Hong Kong. Its registration number is 3063505.

* The sole director of ATHPL through resolution dated July 15, 2025 has approved the process of winding up of ATHPL and appointment of liquidators in this regard.

Nature of business ATHPL is authorised to engage in the business of marketing, business development and technical services.

Capital structure As on the date of this Prospectus, the details of the capital structure of ATHPL are as follows:

Particulars Aggregate nominal value (in USD) Authorised share capital 10,000 shares of USD 1 each 10,000 Issued, subscribed and paid-up capital 10,000 shares of USD 1 each 10,000 Shareholding pattern

The shareholding pattern of ATHPL as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of shares bearing face Percentage of value of USD 1 each shareholding (%)

1. Aequs Engineered Plastics Private Limited 10,000 100.00 Total 10,000 100.00 Financial information

Certain key financial indicators of ATHPL are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025* 2024 2023 Revenue from operations - 18.61 66.26 Reserves (0.98) 0.11 0.42 Total income 0.00 18.86 66.43 Profit/(Loss) after tax (1.10) (0.32) 1.92 Profit/(Loss) after tax margin (%) NA (1.73) 2.90 Earnings per share (Basic) (in ₹) (110.17) (30.76) 189.94 Earnings per share (Diluted) (in ₹) (110.17) (30.76) 189.94 * The sole director of ATHPL through resolution dated July 15, 2025 has approved the process of winding up of ATHPL and appointment of liquidators in this regard.

Accumulated profits or losses There are no accumulated profits or losses of ATHPL that have not been accounted for by our Company in the Restated Consolidated Financial Information.

III. Joint Ventures

1. Aerospace Processing India Private Limited Corporate information Aerospace Processing India Private Limited (“API”) was incorporated as a private limited company on July 2, 2007, under the Companies Act, 1956 with the RoC. The registered office of API is at Aequs SEZ, No. 437/A, Hattargi Village, Hukkeri Taluk, Belagavi 591 243, Karnataka, India. Its CIN is U35303KA2007PTC043311.

356Nature of business API is authorised to engage inter alia in the business of surface treatment, surface analysis, heat treatment, vacuum homogenization, stress relieving, normalizing, vacuum hardening, vacuum precipitation, vacuum brazing and electron beam welding of aerospace, automotive, industrial and engineering components in commercial, military and space sectors.

Capital structure As on date of this Prospectus, the details of the capital structure of API are as follows:

Particulars Aggregate nominal value (in ₹) Authorised share capital 16,900,000 equity shares of ₹ 10 each 169,000,000 Issued, subscribed and paid-up capital 16,889,846 equity shares of ₹ 10 each 168,898,460 Shareholding pattern

The shareholding pattern of API as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Limited 8,444,923 50.00

2. Magellan Aerospace Limited 8,444,923 50.00 Total 16,889,846 100.00 Financial information

Certain key financial indicators of API are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Revenue from operations 653.65 517.70 407.46 Reserves 267.89 146.59 75.34 Total income 661.84 546.82 411.16 Profit/(Loss) after tax 121.46 64.87 17.12 Profit/(Loss) after tax margin (%) 18.58 12.53 4.20 Earnings per share (Basic) (in ₹) 7.19 3.84 1.01 Earnings per share (Diluted) (in ₹) 7.19 3.84 1.01

2. SQuAD Forging India Private Limited Corporate information SQuAD Forging India Private Limited (“SQuAD”) was incorporated as a private limited company on January 19, 2011 under the Companies Act, 1956 with the RoC. The registered office of SQuAD is at Aequs SEZ, No. 437/A, Hattargi Village, Hukkeri Taluk, Belagavi 591 243, Karnataka, India. Its CIN is U28910KA2011PTC056681.

Nature of business SQuAD is authorised under its memorandum of association to engage inter alia in the business of forging of aerostructural parts, landing gear and braking system components in aluminium, steel, titanium or nickel base alloys and also manufacture of critical parts for automotive, power generation, oil and gas markets.

Capital structure As on date of this Prospectus, the details of the capital structure of SQuAD are as follows:

Particulars Aggregate nominal value (in ₹ million) Authorised share capital 167,471,280 equity shares of ₹ 10 each 1,674,712,800 Issued, subscribed and paid-up capital 357Particulars Aggregate nominal value (in ₹ million) 167,422,174 equity shares of ₹ 10 each 1,674,221,740 Shareholding pattern

The shareholding pattern of SQuAD as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Limited 83,711,087 50.00

2. Aubert & Duval SAS 83,711,087 50.00 Total 167,422,174 100.00 Financial information

Certain key financial indicators of SQuAD are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024 2023 Revenue from operations 850.33 619.50 483.93 Reserves (587.68) (695.75) (737.86) Total income 862.82 627.23 511.39 Profit/(Loss) after tax 103.91 39.05 (34.59) Profit/(Loss) after tax margin (%) 12.22 6.30 (7.15) Earnings per share (Basic) (in ₹) 0.62 0.25 (0.23) Earnings per share (Diluted) (in ₹) 0.62 0.25 (0.23)

3. Aequs Cookware Private Limited Corporate information Aequs Cookware Private Limited (“ACPL”) was incorporated as a private limited company on June 20, 2024, under the Companies Act 2013 with the RoC. The registered office of ACPL is at HDGC, Sy No 11, Hissa No.

12, Ittigatti Village, Kanavihonnapur, Dharwad 580 114, Karnataka, India. Its CIN is U27504KA2024PTC189903.

Nature of business ACPL is authorised under its memorandum of association to engage inter alia in the business of of manufacturer of commercial use cookware appliances, kitchenware appliances and all types of cooking utensils.

Capital structure As on the date of this Prospectus, the details of the capital structure of ACPL are as follows:

Particulars Aggregate nominal value (in ₹ million) Authorised share capital 8,500,000 equity shares of ₹ 10 each 85,000,000 Issued, subscribed and paid-up capital 8,300,000 equity shares of ₹ 10 each 83,000,000 Shareholding pattern

The shareholding pattern of ACPL as on the date of this Prospectus is set out below:

S. No. Name of the shareholder No. of equity shares bearing Percentage of equity face value of ₹ 10 each shareholding (%)

1. Aequs Limited 4,150,000 50.00

2. Tramontina Internacional S.A. 4,150,000 50.00 Total 8,300,000 100.00 Financial information 358Certain key financial indicators of ACPL are set forth below: (in ₹ million, unless specified otherwise) Particulars For the Fiscal 2025 2024* 2023* Revenue from operations 160.05 N.A. N.A.

Reserves (34.21) N.A. N.A.

Total income 192.33 N.A. N.A.

Profit/(Loss) after tax (55.41) N.A. N.A.

Profit/(Loss) after tax margin (%) (34.62) N.A. N.A.

Earnings per share (Basic) (in ₹) 13.36 N.A. N.A.

Earnings per share (Diluted) (in ₹) 13.36 N.A. N.A. * ACPL was incorporated in the Financial Year 2025. Therefore, the key financial indicators for the Financial Years 2023 and 2024 are not applicable.

Other confirmations Listing As on the date of this Prospectus, none of the securities of our Subsidiaries are listed in India or abroad. Further, none of the securities of our Subsidiaries have been refused listing by any stock exchange in India or abroad.

Interest in our Company As on the date of this Prospectus, except as disclosed in “Restated Consolidated Financial Information – Note 35 - Related Party Transactions” on page 471, our Subsidiaries and Joint Ventures do not have any: (a) business interest in our Company; or (b) related business transactions with our Company.

Common pursuits Our Subsidiaries and Joint Ventures are either engaged in or are authorised by their respective constitutional documents to engage in the same line of business as that of our Company. As on the date of this Prospectus, our Company does not have any policy to address situations of conflict of interest arising out of such common pursuits.

We shall adopt necessary procedures and practices as permitted by law to address any situations that may lead to conflict, as and when they arise. For further details see “Risk Factors – We have entered into, and may continue to enter into related party transactions. We cannot assure you that such transactions, individually or in the aggregate, will not have an adverse effect on our business, results of operations, financial condition and cash flows.” on page 56.

359OUR MANAGEMENT In terms of the Companies Act 2013 and the Articles of Association, our Company is authorised to have a minimum of three Directors and a maximum of 12 Directors. As on the date of this Prospectus, our Board has six Directors, comprising one Managing Director, one Executive Director, one Non-executive Director and three Independent Directors (including one woman Independent Director). The present composition of our Board and its committees is in accordance with the corporate governance requirements prescribed under the Companies Act and the SEBI Listing Regulations.

The following table sets forth details regarding our Board as on the date of this Prospectus:

S. Name, designation, address, occupation, date of birth, Age (in Directorships in other companies No. term, period of directorship and DIN years)

1. Aravind Shivaputrappa Melligeri 57 Indian companies

Designation: Executive Chairman and Chief Executive Listed companies Officer Nil

Address: 23 Grand Colonial Drive, The Woodlands, TX 77382-2071, USA. Unlisted companies

Occupation: Entrepreneur • Invest Karnataka Forum*

Date of birth: May 24, 1968 Foreign companies

Term: Five years with effect from May 13, 2025 Listed companies

Period of directorship: Since March 27, 2000 Nil

DIN: 00787735 Unlisted companies • Aequs Inc. (incorporated in Cayman Islands); • Aequs Infrastructures Private Limited (incorporated in Mauritius); • Aequs Manufacturing Investments Private Limited (incorporated in Mauritius); and • QuEST Global Services Pte. Ltd.

(incorporated in Singapore)

2. Rajeev Kaul 54 Indian companies

Designation: Managing Director Listed companies

Address: 9, Parjat Lane, Mango Meadows Udyambag, Nil Khanapur Road, Majagaon, Belagavi 590 008, Karnataka, India Unlisted companies

Occupation: Service • Aequs Cookware Private Limited; • Aerospace India Association;

Date of birth: November 18, 1971 • Aerospace Processing India Private Limited; and

Term: Three years with effect from April 1, 2024, liable • SQuAD Forging India Private Limited. to retire by rotation Foreign companies

Period of directorship: Since November 2, 2011 Listed companies

DIN: 01468590 Nil Unlisted companies Nil

3. Ajay Aravind Prabhu 57 Indian companies

Designation: Non-executive Director Listed companies 360S. Name, designation, address, occupation, date of birth, Age (in Directorships in other companies No. term, period of directorship and DIN years)

Address: 3 Jalan Rumbia, #13-3 The Imperial, Singapore Nil 239 617 Unlisted companies

Occupation: Service Kadambi Prabhu Family Services Private

Date of birth: July 19, 1968 Limited

Term: Liable to retire by rotation Foreign companies

Period of directorship: Since July 31, 2003 Listed companies

DIN: 00477195 Nil Unlisted companies QuEST Global Services Pte. Ltd. (incorporated in Singapore)

4. Eberhard Klaus Richter 61 Indian companies

Designation: Independent Director Listed companies

Address: 80639 Munchen Winthirstr.6, Germany Nil

Occupation: Professional Unlisted companies

Date of birth: September 29, 1964 Nil

Term: Five years with effect from April 25, 2025 Foreign companies

Period of directorship: Since June 24, 2021 Listed companies

DIN: 07427610 Nil Unlisted companies OTTO FUCHS Verwaltungs SE (incorporated in Germany)

5. Vidya Sarathy 59 Indian companies

Designation: Independent Director Listed companies

Address: 145, 6th Cross, Vijaya Bank Layout Nil Billekahalli, Bengaluru, Karnataka 560 076, India Unlisted companies

Occupation: Professional • AeroStructures Manufacturing India

Date of birth: February 2, 1966 Private Limited; • Aequs Engineered Plastics Private

Term: Five years with effect from April 25, 2025 Limited; and • Wildcraft India Limited.

Period of directorship: Since January 31, 2025 Foreign companies

DIN: 01689378 Listed companies Nil Unlisted companies Aequs Aerospace France SAS (incorporated in France)

6. Anup Wadhawan 64 Indian companies

Designation: Independent Director Listed companies 361S. Name, designation, address, occupation, date of birth, Age (in Directorships in other companies No. term, period of directorship and DIN years)

Address: A-4, Greater Kailash Enclave-II, Savitri Road, • Yatra Online Limited; and New Delhi 110 048, India • GlaxoSmithKline Pharmaceuticals Limited.

Occupation: Professional Unlisted companies

Date of birth: June 30, 1961 • Aspero Markets Private Limited;

Term: Five years with effect from April 25, 2025 • Bajaj Allianz General Insurance Company Limited;

Period of directorship: Since April 25, 2025 • Bajaj Allianz Life Insurance Company Limited;

DIN: 03565167 • CredAvenue Private Limited; • Globe All India Services Limited; • IVC Association; • Jal Seva Charitable Foundation*; and • Turtlemint Fintech Solutions Limited.

Foreign companies Listed companies Nil Unlisted companies Nil * Not for profit organisation.

Brief profiles of our Directors Aravind Shivaputrappa Melligeri is the Executive Chairman and Chief Executive Officer on our Board. He is also one of our Promoters. He has over 25 years of experience in the aerospace sector and has been associated with our Company since its incorporation in 2000. He has led the setting up of our manufacturing clusters including the Belagavi Manufacturing Cluster, which is recognized as the first precision manufacturing SEZ in India (Source: F&S Report, see “Industry Overview”, para 6 on page 238) and has been instrumental in our operations.

He holds a bachelor’s degree in mechanical engineering from the Mangalore University, and a master’s degree in mechanical engineering from the Pennsylvania State University. He is also an alumnus of the National Institute of Technology, Karnataka. In 2023, he was conferred with the title of ‘Outstanding Engineering Alumnus’ in recognition of his distinguished career and exemplary leadership abilities, by PennState College of Engineering.

Rajeev Kaul is the Managing Director of our Company. He holds a bachelor’s degree in arts in mathematics from the University of Delhi and is a member of the Institute of Chartered Accountants of India. He is responsible for the overall operations and performance of different verticals in the Company, including aerospace and consumer durable goods and has been associated with our Company since April 1, 2007. He has over 22 years of experience in finance and aerospace sectors. He was previously associated with QuEST Global Engineering Services Private Limited and A.F. Ferguson & Co.

Ajay Aravind Prabhu is a Non-executive Director on our Board. He holds a bachelor’s degree in electronics and communication engineering from Mangalore University, and a master’s degree in electrical and computer engineering and a doctorate in philosophy from the University of Massachusetts, USA. He has over 23 years of experience in operations and technology sectors. He is currently associated with QuEST Global Engineering Services Private Limited.

Eberhard Klaus Richter is an Independent Director on our Board. He holds a degree in engineering and a doctorate in robotics from the Technical University of Munich. He has over 29 years of experience in the field of procurement, materials management and business management. He was previously associated with Airbus SAS, Diehl Verwaltungs-Stiflung, the BMW Group and McKinsey & Company, Inc.

Vidya Sarathy is an Independent Director on our Board. She holds a bachelor’s degree in chemistry from the 362University of Madras, and a diploma in international financial reporting from the Association of Chartered Certified Accountants. She is also an associate of the Institute of Chartered Accountants of India and the Institute of Company Secretaries of India. She has over 23 years of experience in various sectors such as, finance and secretarial compliance. She was previously associated with Robert Bosch Engineering and Business Solutions Limited, 3M India Limited, Lifestyle International Private Limited, Tata Motors Limited, Tata Cummins Private Limited, AGP CGD Private Limited and SUD-Chemie India Private Limited.

Anup Wadhawan is an Independent Director on our Board. He holds a bachelor’s degree in arts (honours) in economics and a master’s degree in arts in economics from University of Delhi, master’s degree in arts and a doctorate of philosophy from Duke University. He is a former Indian Administrative Services officer from the batch of 1985. He has held several important positions over the course of over 35 years, including as secretary, Department of Commerce, Government of India, joint secretary in the Ministry of Finance, Government of India, director at the Prime Minister’s Office.

Relationship between Directors, Key Managerial Personnel and Senior Management None of our Directors, Key Managerial Personnel and Senior Management are related to each other.

Arrangement or understanding with major shareholders, customers, suppliers or others There is no arrangement or understanding with major Shareholders, customers, suppliers or others, pursuant to which any of our Director have been appointed as a director or member of senior management.

Terms of appointment of our Executive Directors Terms of appointment of our Executive Chairman and Chief Executive Officer Pursuant to the resolutions passed by our Board on May 10, 2025 and by our Shareholders on May 13, 2025, Aravind Shivaputrappa Melligeri was appointed as the Executive Chairman and Chief Executive Officer of our Company with effect from May 13, 2025.

Further, pursuant to a resolution passed by our Shareholders on May 13, 2025, following are the terms of his remuneration payable to him by Aequs Aero Machine, Inc.:

Particulars Remuneration Fiscal 2026 Fiscal 2027 Fiscal 2028 Fixed remuneration USD 500,000 USD 500,000 USD 500,000 Variable pay Up to USD 750,000* Up to USD 1,000,000* Up to 1,000,000 Specific target fulfilment pay USD 2,000,000*# USD 2,000,000*# - * Linked to the achievement of set targets placed before the Nomination and Remuneration Committee for its review and recommendation to the Board.

# USD 2,000,000 is an aggregate amount which is payable either in Fiscal 2026 and/ or Fiscal 2027, placed before the Nomination and Remuneration Committee for its review and recommendation to the Board, and payable anytime during these two years, upon achievement of such targets.

He is also entitled to reimbursement of travelling, boarding and lodging, and such other expenses incurred by him in connection with meeting business requirements.

Since our Executive Chairman and Chief Executive Officer was appointed in such capacity in Fiscal 2026, he has not received any remuneration for Fiscal 2025 from our Company.

Terms of appointment of our Managing Director Pursuant to the resolutions passed by our Board on April 21, 2025 and by our Shareholders on April 25, 2025, Rajeev Kaul is entitled to receive the following remuneration and perquisites, in his capacity as the Managing

Director:

Particulars Amount Fixed remuneration ₹ 12.50 million per annum* Variable pay Variable remuneration of up to 50% of fixed remuneration* Employee stock options Employee stock options granted from time to time under the ESOP Plan 2025 *For Fiscals 2026 and 2027 363Our Managing Director, Rajeev Kaul, was paid a remuneration (including fixed remuneration and variable pay) of ₹ 12.44 million for Fiscal 2025.

Terms of appointment of our Non-executive Director and Independent Directors Terms of appointment of our Non-executive Director Our Non-executive Director may be entitled to receive sitting fees for attending meetings of our Board and committees thereof, as may be decided by our Board.

Our Non-executive Director, Ajay Aravind Prabhu did not receive any remuneration from our Company in Fiscal

2025.

Terms of appointment of our Independent Directors Pursuant to resolutions passed by our Board and Shareholders dated April 21, 2025 and April 25, 2025, respectively, our Independent Directors are entitled to receive the following remuneration:

S. Name of the Independent Remuneration No. Director Fiscal 2026 Fiscal 2027 Fiscal 2028

1. Eberhard Klaus Richter Euro 50,000* per annum Euro 55,000* per annum Euro 60,000* per annum

2. Vidya Sarathy ₹ 2.50 million per annum ₹ 3.00 million per annum ₹ 3.50 million per annum

3. Anup Wadhawan ₹ 4.50 million per annum ₹ 5.00 million per annum ₹ 5.50 million per annum * Payable quarterly ₹ based on the forex value as on that date.

Except for Vidya Sarathy who was paid ₹ 0.42 million in her capacity as an Additional Director in Fiscal 2025, none of our Independent Directors were paid any remuneration for Fiscal 2025, since they were appointed in Fiscal 2026.

Remuneration paid or payable by our Subsidiaries Except as disclosed below, none of our Directors have received or were entitled to receive any remuneration, sitting fees or commission from any of our Subsidiaries in Fiscal 2025:

S. Name of the Director Total remuneration/ sitting fees Name of Subsidiary No. (in ₹ million)

1. Aravind Shivaputrappa Melligeri 42.28 Aequs Aero Machine Inc.

2. Eberhard Klaus Richter 4.58 Aequs Aero Machine Inc.

Bonus or profit sharing plan for our Directors Except as stated in “- Terms of Appointment of our Managing Director” and “- Terms of Appointment of our Executive Chairman and Chief Executive Officer” above, none of our Directors are party to any bonus or profit- sharing plan of our Company.

Shareholding of our Directors in our Company Except as stated in “Capital Structure - Shareholding of our Directors, Key Managerial Personnel and Senior Management in our Company” on page 140, none of our Directors hold any Equity Shares in our Company as on the date of this Prospectus.

Contingent and deferred compensation payable to our Directors There is no contingent or deferred compensation payable to our Directors for Fiscal 2025, which does not form part of their remuneration during Fiscal 2025.

Loans to Directors None of our Directors have availed loans from our Company.

Service contracts with Directors There are no service contracts entered into with any Directors, which provide for benefits upon termination of employment.

364Interest of Directors All our Directors may be deemed to be interested to the extent of remuneration and reimbursement of expenses, if any, payable to them by our Company as well as sitting fees, if any, payable to them for attending meetings of our Board or a committee thereof, as well as to the extent of other remuneration and reimbursement of expenses, if any, payable to them for services rendered as an officer or employee or director of our Company or our Subsidiaries.

Certain of our Directors may also be interested to the extent of Equity Shares, if any (together with dividends and other distributions in respect of such Equity Shares), held by the entities in which they are associated as partners, promoters, directors, proprietors, members or trustees, or that may be subscribed by or allotted to the companies, firms, ventures, trusts in which they are interested as promoters, directors, partners, proprietors, members or trustees, pursuant to the Offer and any dividend and other distributions payable in respect of such Equity Shares.

Our Non-Executive Director, Ajay Aravind Prabhu is a director on the board of directors of the trustee of one of our Shareholders, Amgele Family Private Trust.

Our Directors may also be deemed to be interested to the extent of the directorships held by them in our Subsidiaries.

Interest in land and property None of our Directors are interested in any property acquired or proposed to be acquired of or by our Company.

None of our Directors have any interest in any transaction by our Company for acquisition of land, construction of building or supply of machinery.

Interest in promotion or formation of our Company Except for our Individual Promoter, Aravind Shivaputrappa Melligeri, none of our Directors have an interest in the promotion of our Company, as on the date of this Prospectus.

Confirmations Our Directors are not, and during the five years prior to the date of this Prospectus, have not been on the board of any listed company whose shares have been/ were suspended from being traded on the stock exchange(s) during the term of their directorship in such company.

None of our Directors have been or are directors on the board of any listed companies which was or has been delisted from any stock exchange(s) during the term of their directorship in such companies. No consideration in cash or shares or otherwise has been paid, or agreed to be paid to any of our Directors, or to the firms or companies in which they are interested as a member by any person either to induce such director to become, or to help such director to qualify as a Director, or otherwise for services rendered by him/her or by the firm or company in which he/she is interested, in connection with the promotion or formation of our Company.

Changes in our Board during the last three years The changes in our Board during the three years immediately preceding the date of this Prospectus are set forth below.

Name of Director Date of change Reasons Mahesh Parasuraman March 24, 2023 Appointment as non-executive additional director* Mahesh Parasuraman September 11, 2023 Cessation as non-executive director Rajeev Kaul April 1, 2024 Re-appointment as Managing Director Shubhada Manohar Rao December 31, 2024 Cessation as non-executive director Vidya Sarathy January 31, 2025 Appointment as Additional Director** Eberhard Klaus Richter April 25, 2025 Re-designation as Independent director** Anup Wadhawan April 25, 2025 Appointment as Independent Director Aravind Shivaputrappa May 13, 2025 Appointment as Executive Chairman and Chief Executive Officer Melligeri * The appointment was regularised by our Shareholders pursuant to their resolution dated March 28, 2023.

** The appointment as an Independent Director was regularised by our Shareholders pursuant to their resolution dated April 25, 2025.

Borrowing Powers 365Our Board is empowered to borrow money in accordance with Section 179 and Section 180 of the Companies Act 2013 and our Articles of Association.

Corporate Governance As on the date of this Prospectus, the Board of Directors of our Company consists of six Directors, out of which, two are Executive Directors, three are Non-executive and Independent Directors (including one woman Independent Director) and one is a Non-executive Director.

Our Board functions either as a full board or through various committees constituted to oversee specific functions.

Our Company is in compliance with the corporate governance norms prescribed under the SEBI Listing Regulations and the Companies Act 2013 in relation to the composition of our Board and constitution of committees thereof. Additionally, Vidya Sarathy, an Independent Director on the Board of our Company has also been appointed as a director on the board of directors of certain of our Material Subsidiaries, AeroStructures Manufacturing India Private Limited, Aequs Aerospace France SAS and Aequs Engineered Plastics Private Limited.

Our Company undertakes to take all necessary steps to continue to comply with all the applicable requirements of SEBI Listing Regulations and the Companies Act 2013.

Board committees Our Company has constituted the following Board committees in terms of the SEBI Listing Regulations, and the Companies Act 2013:

(a) Audit Committee;

(b) Nomination and Remuneration Committee;

(c) Stakeholders’ Relationship Committee;

(d) Risk Management Committee; and

(e) Corporate Social Responsibility Committee.

Audit Committee The Audit Committee was constituted by way of a Board resolution dated May 8, 2025. The Audit Committee is in compliance with Section 177 and other applicable provisions of the Companies Act 2013 and Regulation 18 of the SEBI Listing Regulations. The Audit Committee currently comprises:

S. No. Name of Director Designation in Audit Committee Independent / Non-Independent

1. Vidya Sarathy Chairperson Independent

2. Anup Wadhawan Member Independent

3. Rajeev Kaul Member Non-Independent The Company Secretary shall act as the secretary to the Audit Committee.

Scope and terms of reference:

The Audit Committee shall have powers, including the following:

1) to investigate any activity within its terms of reference;

2) to seek information from any employee;

3) to obtain outside legal or other professional advice;

4) to secure attendance of outsiders with relevant expertise, if the Committee considers necessary as may be prescribed under the Companies Act 2013 (together with the rules thereunder) and SEBI Listing Regulations; and

5) such other powers as may be prescribed under the Companies Act and the SEBI Listing Regulations.

366The roles and responsibilities of the Audit Committee shall inter alia include the following:

1) oversight of financial reporting process and the disclosure of financial information relating to the Company to ensure that the financial statements are correct, sufficient and credible;

2) recommendation to the Board for appointment, re-appointment, replacement, remuneration and other terms of appointment of statutory auditors of the Company and the fixation of the audit fee;

3) approval of payment to statutory auditors for any other services rendered by the statutory auditors;

4) examining and reviewing, with the management, the annual financial statements and auditor's report thereon before submission to the Board for approval, with particular reference to: a) matters required to be included in the director’s responsibility statement to be included in the Board’s report in terms of clause (c) of sub-section 3 of Section 134 of the Companies Act 2013;

b) changes, if any, in accounting policies and practices and reasons for the same; c) major accounting entries involving estimates based on the exercise of judgment by management; d) significant adjustments made in the financial statements arising out of audit findings;

e) compliance with listing and other legal requirements relating to financial statements; f) disclosure of any related party transactions; and g) qualifications and modified opinion(s) in the draft audit report.

5) reviewing, with the management, the quarterly, half-yearly and annual financial statements before submission to the Board for approval;

6) reviewing, with the management, the statement of uses / application of funds raised through an issue (public issue, rights issue, preferential issue, etc.), the statement of funds utilized for purposes other than those stated in the Offer document / prospectus / notice and the report submitted by the monitoring agency monitoring the utilisation of proceeds of a public or rights issue or preferential issue or qualified institutions placement, and making appropriate recommendations to the Board to take up steps in this matter;

7) reviewing and monitoring the auditor’s independence and performance, and effectiveness of audit process;

8) approval of any subsequent modification of transactions of the Company with related parties and omnibus approval for related party transactions proposed to be entered into by the Company, subject to the conditions as may be prescribed, by the independent directors who are members of the Audit Committee;

a) Recommend criteria for omnibus approval or any changes to the criteria for approval of the Board; b) Make omnibus approval for related party transactions proposed to be entered into by the Company for every financial year as per the criteria approved;

c) Review of transactions pursuant to omnibus approval; d) Make recommendation to the Board, where Audit Committee does not approve transactions other than the transactions falling under Section 188 of the Companies Act 2013.

Explanation: The term “related party transactions” shall have the same meaning as provided in Clause 2(zc) of the SEBI Listing Regulations and/or the applicable Accounting Standards and/or the Companies Act 2013.

9) scrutiny of inter-corporate loans and investments;

36710) valuation of undertakings or assets of the Company, wherever it is necessary;

11) evaluation of internal financial controls and risk management systems;

12) reviewing, with the management, performance of statutory and internal auditors, and adequacy of the internal control systems;

13) reviewing the adequacy of internal audit function, if any, including the structure of the internal audit department, staffing and seniority of the official heading the department, reporting structure coverage and frequency of internal audit;

14) discussion with internal auditors of any significant findings and follow-up thereon;

15) reviewing the findings of any internal investigations by the internal auditors into matters where there is suspected fraud or irregularity or a failure of internal control systems of a material nature and reporting the matter to the Board;

16) discussion with statutory auditors before the audit commences, about the nature and scope of audit as well as post-audit discussion to ascertain any area of concern;

17) looking into the reasons for substantial defaults in the payment to depositors, debenture holders, shareholders (in case of non-payment of declared dividends) and creditors;

18) reviewing the functioning of the whistle blower mechanism;

19) monitoring the end use of funds raised through public offers and related matters;

20) overseeing the vigil mechanism established by the Company, with the chairperson of the Audit Committee directly hearing grievances of victimization of employees and directors, who used vigil mechanism to report genuine concerns in appropriate and exceptional cases;

21) approval of appointment of chief financial officer (i.e., the whole-time finance Director or any other person heading the finance function or discharging that function) after assessing the qualifications, experience and background, etc. of the candidate;

22) reviewing the utilization of loans and/or advances from/investment by the Company in its subsidiary(/ies) exceeding ₹ 1,000,000,000 or 10% of the asset size of the subsidiary(/ies), whichever is lower including existing loans/ advances/ investments;

23) review the financial statements, in particular, the investments made by any unlisted subsidiary;

24) considering and commenting on rationale, cost-benefits and impact of schemes involving merger, demerger, amalgamation etc., on the Company and its shareholders;

25) approving the key performance indicators (“KPIs”) for disclosure in the offer documents, and approval of KPIs once every year, or as may be required under applicable law;

26) carrying out any other functions required to be carried out by the Audit Committee as may be decided by the Board and/or as provided under the Companies Act 2013, the SEBI Listing Regulations or any other applicable law, as and when amended from time to time; and

27) the Audit Committee shall mandatorily review the following information: a) management discussion and analysis of financial condition and results of operations; b) management letters / letters of internal control weaknesses issued by the statutory auditors;

c) internal audit reports relating to internal control weaknesses; d) the appointment, removal and terms of remuneration of the chief internal auditor; e) statement of of deviations in terms of the SEBI Listing Regulations:

368i. quarterly statement of deviation(s) including report of monitoring agency, if applicable, submitted to stock exchange(s) where the Equity Shares are proposed to be listed in terms of the SEBI Listing Regulations;

ii. annual statement of funds utilized for purposes other than those stated in the offer document/ prospectus/ notice in terms of the SEBI Listing Regulations; f) such information as may be prescribed under the Companies Act 2013 and the SEBI Listing Regulations.

Nomination and Remuneration Committee The Nomination and Remuneration Committee was constituted by way of a Board resolution dated May 8, 2025.

The composition and the terms of reference of the Nomination and Remuneration Committee are in compliance with Section 178 and other applicable provisions of the Companies Act 2013 and Regulation 19 of the SEBI Listing Regulations. The Nomination and Remuneration Committee currently comprises:

S. No. Name of Director Designation in Nomination Independent / Non-Independent and Remuneration Committee

1. Eberhard Klaus Richter Chairperson Independent

2. Ajay Aravind Prabhu Member Non-Independent

3. Anup Wadhawan Member Independent

Scope and terms of reference:

The role of the Nomination and Remuneration Committee shall, inter alia, include the following:

1) Formulation of the criteria for determining qualifications, positive attributes and independence of a director and recommend to our Board a policy relating to the remuneration of the directors, key managerial personnel and other employees (“Remuneration Policy”);

While formulating the Remuneration Policy, the Nomination and Remuneration Committee should

ensure that: • the level and composition of remuneration be reasonable and sufficient to attract, retain and motivate directors of the quality required to run the Company successfully; • relationship of remuneration to performance is clear and meets appropriate performance benchmarks; and • remuneration to Directors, Key Managerial Personnel and Senior Management involves a balance between fixed and incentive pay reflecting short- and long-term performance objectives appropriate to the working of the Company and its goals.

2) For every appointment of an independent director, the Nomination and Remuneration Committee shall evaluate the balance of skills, knowledge and experience on the Board and on the basis of such evaluation, prepare a description of the role and capabilities required of an independent director. The person recommended to the Board for appointment as an independent director shall have the capabilities identified in such description. For the purpose of identifying suitable candidates, the Committee may:

a) use the services of external agencies, if required; b) consider candidates from a wide range of backgrounds, having due regard to diversity; and c) consider the time commitments of the candidates.

3) Advice and recommend to the Board on various matters relating to the appointment, removal and remuneration (including changes if any) of Director, Senior Management and Key Management Personnel;

4) Formulating performance evaluation criteria of all Independent Directors and Board of Directors;

3695) Identifying persons who are qualified to become directors and who may be appointed in senior management in accordance with prescribed criteria;

6) Assist and advise the Board in overseeing succession planning for Directors, Senior Management and Key Managerial personnel;

7) Recommend to the Board, all remuneration, in whatever form, payable to Senior Management;

8) Assist and advise the Board in ensuring a transparent nomination process to the Board with the diversity of thought, experience, knowledge, perspective and gender in the Board;

9) To act as administrator of the stock option plans and schemes of the Company;

10) Devising a policy on Board diversity;

11) Recommend to the Board whether to extend or continue the term of appointment of the independent director, inter alia, on the basis of the report of performance evaluation of independent director; and

12) Carrying out any other functions required to be carried out by the Nomination and Remuneration Committee as mandated by the Board as required under SEBI Listing Regulations or any other applicable law, as and when amended from time to time.

Stakeholders’ Relationship Committee The Stakeholders’ Relationship Committee was constituted by a resolution of our Board dated May 8, 2025. The composition and terms of reference of the Stakeholders’ Relationship Committee are in compliance with Section 178 of the Companies Act 2013 and Regulation 20 of the SEBI Listing Regulations. The Stakeholders’

Relationship Committee currently comprises:

S. No. Name Designation in Stakeholders’ Executive / Non- Executive Relationship Committee

1. Anup Wadhawan Chairperson Non-Executive and Independent Director

2. Aravind Shivaputrappa Melligeri Member Executive Chairman and Chief Executive Officer

3. Rajeev Kaul Member Executive Director

Scope and terms of reference:

The Stakeholders’ Relationship Committee shall be responsible for, among other things, as may be required by the under applicable law, the following:

1) Resolving the grievances of the security holders of the Company including complaints related to transfer/transmission of shares, non-receipt of annual report, non-receipt of declared dividends, issue of new/duplicate certificates, general meetings etc.

2) Review of measures taken for effective exercise of voting rights by shareholders.

3) Review of adherence to the service standards adopted by the Company in respect of various services being rendered by the Registrar and Share Transfer Agent.

4) Review of the various measures and initiatives taken by the Company for reducing the quantum of unclaimed dividends and ensuring timely receipt of dividend warrants/annual reports/statutory notices by the shareholders of the Company.

5) Such other matter as may be specified by the Board from time to time.

6) Any other matter as prescribed by the Companies Act 2013 and rules made thereunder and SEBI Listing Regulations.

Risk Management Committee The Risk Management Committee was reconstituted by a resolution of our Board dated May 8, 2025. The composition and terms of reference of the Risk Management Committee are in compliance with Regulation 21 of 370the SEBI Listing Regulations. The Risk Management Committee currently comprises:

S. No. Name Designation Position in the Committee

1. Vidya Sarathy Independent Director Chairperson

2. Eberhard Klaus Richter Independent Director Member

3. Rajeev Kaul Managing Director Member

Scope and terms of reference:

1) To formulate a detailed risk management policy which shall include:

(a) a framework for identification of internal and external risks specifically faced by the Company, in particular including financial, operational, sectoral, sustainability (particularly, environment, social and governance related risks), information, cyber security risks or any other risk as may be determined by the Risk Management Committee;

(b) measures for risk mitigation including systems and processes for internal control of identified risks; and

(c) business continuity plan;

2) To ensure that appropriate methodology, processes and systems are in place to monitor and evaluate risks associated with the business of the Company;

3) To monitor and oversee implementation of the risk management policy, including evaluating the adequacy of risk management systems;

4) To periodically review the risk management policy, at least once in two years, including by considering the changing industry dynamics and evolving complexity,;

5) To keep the Board of the Company informed about the nature and content of its discussions, recommendations and actions to be taken;

6) The appointment, removal and terms of remuneration of the chief risk officer (if any) shall be subject to review by the Risk Management Committee; and

7) The Risk Management Committee shall coordinate its activities with other committees, in instances where there is any overlap with activities of such committees, as per the framework laid down by the Board.

Corporate Social Responsibility Committee The Corporate Social Responsibility Committee was re-constituted by a resolution of our Board dated May 8,

2025. The composition and terms of reference of the Corporate Social Responsibility Committee are in compliance with Section 135 and other applicable provisions of the Companies Act 2013. The Corporate Social

Responsibility Committee currently comprises:

S. No. Name Designation Position in the Committee

1. Ajay Aravind Prabhu Non-executive Director Chairperson

2. Rajeev Kaul Managing Director Member

3. Anup Wadhawan Independent Director Member

Scope and terms of reference:

The Corporate Social Responsibility Committee shall be authorized to perform the following functions:

1) formulate and recommend, a corporate social responsibility policy to the Board;

2) identify the activities to be undertaken as per Schedule VII of the Companies Act 2013;

3) institute a transparent monitoring mechanism for implementation of the CSR Projects or programs or activities undertaken by the Company;

4) recommend the amount of CSR expenditure to be incurred on the earmarked CSR activities;

3715) monitor the implementation of the corporate social responsibility policy of the Company from time to time and create mechanisms for tracking performance of identified projects or programs;

6) formulate and recommend to the Board, an annual action plan in pursuance of its corporate social responsibility policy, which shall include the items as mentioned in rule 5(2) of the Companies (Corporate Social Responsibility Policy) Rules, 2014; and

7) discharge such other functions as the Board may deem fit to promote the corporate social responsibility activities of the Company and exercise such other powers as may be conferred upon the Corporate Social Responsibility Committee in terms of the provisions of Section 135 of the Companies Act, as amended.

In addition to the above, our Company has also constituted an IPO Committee.

372373Key Managerial Personnel and Senior Management Key Managerial Personnel The details of the Key Managerial Personnel, as of the date of this Prospectus are as follows:

In addition to Aravind Shivaputrappa Melligeri, our Executive Chairman and Chief Executive Officer and Rajeev Kaul, our Managing Director, whose details is provided in “Brief Profiles of our Directors” above, the details of

our other Key Managerial Personnel as on the date of this Prospectus are set forth below:

Dinesh Venkatachalam Iyer is our Chief Financial Officer. He has been associated with our Company since January 3, 2022. He has over 19 years of experience in finance. He is responsible for end-to-end management of the finance function, including corporate governance, risk management, business partnering, treasury and funding, cost management, financial operations, taxation, financial accounting, and reporting of our Company. He holds a bachelor’s degree in commerce from Bangalore University. He is also a member of the Institute of Chartered Accountants of India. He was previously associated with Biocon Biologics Limited, Syngene International Limited and Dell International Services India Private Limited. In Fiscal 2025, he received an aggregate compensation of ₹ 12.26 million from our Company.

Ravi Mallikarjun Hugar is our Company Secretary and Compliance Officer. He has been associated with our Company since July 2, 2007. He has over 17 years of experience in secretarial and regulatory functions. He is responsible for the secretarial and regulatory compliance functions of our Company. He holds a bachelor’s degree in commerce from Karnatak University, Dharwad. He is an associate member of the Institute of Company Secretaries of India. In Fiscal 2025, he received an aggregate compensation of ₹ 5.42 million from our Company.

Senior Management In addition to our Chief Financial Officer and our Company Secretary and Compliance Officer, whose details have been disclosed above, the details of our Senior Management as on the date of this Prospectus are set forth

below:

Ravi Guttal is the Chief Technology Officer & Senior Vice President-Engineering & Quality of our Company.

He was previously associated with our Company since February 16, 2022, and was thereafter transferred to ACPPL with effect from August 1, 2023. He is responsible for process & system optimization, new product development, research & development (simulation process). He holds a bachelor’s degree in engineering (civil branch) from Mangalore University, master’s degree in civil engineering (science) from Carnegie-Mellon University, master’s degree in management and doctorate of philosophy in civil engineering from Rensselaer Polytechnic Institute. He was previously associated with KLE Technological University. In Fiscal 2025, he received an aggregate compensation of ₹ 7.41 million from ACPPL.

Kapil Mahajan is the Chief Human Resource Officer of our Company. He has been associated with our Company since June 2, 2025. He is responsible for providing strategic leadership in relation to people and culture across manufacturing business divisions of the Company. He has oversight over human resources operations across such business divisions, with emphasis on financial and personnel progress through long-term goals, providing vision and guidance to high-performance leadership team of our Company. He holds a bachelor’s degree in science from The University of Burdwan, and has completed his masters in business administration from L.N. Mishra College of Business Administration, Muzaffarpur and a postgraduate certificate in human resource management from Xavier School of Management. He was previously associated with Pfizer Limited, Reliance Communications Limited, Tata Advanced Systems Limited, Aditya Birla Retail Limited, and Tata Teleservices Limited. Since he was appointed in Fiscal 2026, he was not paid any remuneration for Fiscal 2025.

Mohamed Bouzidi is the President – Aerospace of AAF. He has been associated with AAF since April 1, 2020.

He is responsible for the overall operations and performance of different business verticals in the aerospace division of our Company. He has cleared the examination for Materials Processing Center, National Higher School of Mines, Paris. He was previously associated with Aubert & Duval Limited and Snecma Moteurs Limited. In Fiscal 2025, he received an aggregate compensation of ₹ 19.06 million from AAF.

Status of Key Managerial Personnel and Senior Management All our Key Managerial Personnel are permanent employees of our Company. However, our members of Senior

Management are employees of our Subsidiaries as set out below:

374(a) Ravi Guttal is an employee of ACPPL; and

(b) Mohamed Bouzidi is an employee of AAF.

Bonus or profit sharing plan for the Key Managerial Personnel and Senior Management Except as disclosed above under “Our Management - Terms of appointment of our Executive Directors”, none of our Key Managerial Personnel or Senior Management are party to any bonus or profit-sharing plan of our Company.

Shareholding of Key Managerial Personnel and Senior Management in our Company Except as stated in “Capital Structure - Shareholding of our Directors, Key Managerial Personnel and Senior Management in our Company” on page 140, none of our Key Managerial Personnel or Senior Management hold any Equity Shares in our Company as on the date of this Prospectus.

For details of employee stock options held by our Key Managerial Personnel and Senior Management, see “Capital Structure – Employee Stock Option Schemes” on page 142.

Service Contracts with Key Managerial Personnel and Senior Management Our Company has not entered into any service contracts, pursuant to which its Key Managerial Personnel or Senior Management are entitled to benefits upon termination of employment. Except statutory benefits upon termination of their employment in our Company or superannuation, no Key Managerial Personnel or Senior Management are entitled to any benefit upon termination of employment or superannuation.

Contingent and deferred compensation payable to Key Managerial Personnel and Senior Management There is no contingent or deferred compensation payable to our Key Managerial Personnel or Senior Management, which accrued in Fiscal 2025.

Arrangements and understanding with major shareholders, customers, suppliers or others None of the Key Managerial Personnel or Senior Management of our Company have been appointed pursuant to any arrangement or understanding with our major shareholders, customers, suppliers or others.

Interest of Key Managerial Personnel and Senior Management Other than as provided in “– Interest of Directors” above on page 365, none of our Key Managerial Personnel or Senior Management have any interest in our Company except to the extent of their remuneration or benefits to which they are entitled to as per their terms of appointment and reimbursement of expenses incurred by them in the ordinary course of business. Our Key Managerial Personnel or Senior Management may also be deemed to be interested to the extent of options to be granted to them under the ESOP Plan 2025. For details, see “Capital Structure – Employee Stock Option Schemes” on page 142.

One of our Senior Management, Mohamed Bouzidi is the sole shareholder of SLI2M Conseil, which acts as the sales and marketing representative of one of our Subsidiaries, AAM, pursuant to a marketing and sales agreement dated July 7, 2025 entered into between AAM and SLI2M Conseil. Pursuant to such agreement, SLI2M Conseil, shall receive € 39,000 per quarter, along with an incentive on a yearly basis, payable based on set performance targets as agreed upon in such agreement.

Our Key Managerial Personnel and Senior Management may also be deemed to be interested to the extent of the directorships held by them in our Subsidiaries and Joint Ventures.

Changes in Key Managerial Personnel or Senior Management during the last three years Other than the changes listed under “Our Management - Changes to our Board in the last three years” above, and as set forth below, there are no other changes in our Key Managerial Personnel or Senior Management in the

three years immediately preceding the date of this Prospectus:

375Name Date Reason Vikas Goel November 30, Resignation as president, advanced technology products of ACCPL 2025 Jean Michael Condamin July 31, 2025 Resignation as chief executive officer of the aerospace division Kapil Mahajan June 2, 2025 Appointment as Chief Human Resources Officer Mohamed Bouzidi April 1, 2025 Appointment as President – Aerospace of AAF Employee stock option and stock purchase schemes For details of the employee stock option schemes of our Company, see “Capital Structure – Employee Stock Option Schemes” on page 142.

Payment or benefit to Key Managerial Personnel and Senior Management of our Company Except as disclosed in “Our Management – Terms of appointment of our Executive Directors”, no amount or benefit has been paid or given to any officer of our Company within the two years preceding the date of filing of this Prospectus or is intended to be paid or given, other than in the ordinary course of their employment.

376OUR PROMOTERS AND PROMOTER GROUP Aravind Shivaputrappa Melligeri, Aequs Manufacturing Investments Private Limited, Melligeri Private Family Foundation and The Melligeri Foundation, are our Promoters. As on the date of this Prospectus, our Promoters hold an aggregate of 393,569,795 Equity Shares bearing face value of ₹ 10 each, comprising 63.82 of the pre- Offer issued, subscribed and paid-up Equity Share capital of our Company. For further details, see “Capital Structure – Notes to Capital Structure – History of build-up of Promoters’ shareholding and lock-in of Promoters’ shareholding – Build-up of Promoters’ shareholding in our Company” on page 127.

Details of our Individual Promoter Aravind Shivaputrappa Melligeri Aravind Shivaputrappa Melligeri, born on May 24, 1968, aged 57 years, is the Executive Chairman and Chief Executive Officer of our Company.

He is a citizen of the USA and an overseas citizen of India.

For the complete profile of Aravind Shivaputrappa Melligeri, along with the details of his address, educational qualifications, experience in the business, positions/ posts held in past, directorships in other entities, other ventures, special achievements, and business and financial activities, see “Our Management – Brief profiles of our Directors” on page 362.

His PAN is ANIPM5265E.

Our Company confirms that the PAN, bank account number, driving license and passport number of our Individual Promoter have been submitted to the Stock Exchanges at the time of filing of the Pre-filed Draft Red Herring Prospectus. Further, our Individual Promoter, being a citizen of the USA, does not possess an Aadhar card.

Details of our Corporate Promoters Aequs Manufacturing Investments Private Limited (“AMIPL”) Corporate information AMIPL was originally incorporated as a private company limited by shares named “QuEST Manufacturing Mauritius Private Limited” on April 9, 2008, under the Companies Act, 2001, with the Registrar of Companies, Mauritius in the Republic of Mauritius. On March 5, 2013, AMIPL amended its certificate of incorporation with the Registrar of Companies, Mauritius and changed its name to “Avija Investments Mauritius Private Limited”.

On January 30, 2014 AMIPL further amended its certificate of incorporation with Registrar of Companies, Mauritius and changed its name to “Aequs Manufacturing Investments Private Limited”. Its corporate identification number is C079392 C1/GBL and PAN is AAPCA8534M. The registered office of AMIPL is situated at 6th Floor, Two Tribeca, Tribeca Central, Trianon 72261, Mauritius.

Nature of business AMIPL is authorised to carry on or undertake any business, do any act, or enter into any transaction that are not prohibited under the laws of Mauritius and is involved in the business of investment holding. There has been no change in the business activities of AMIPL.

Board of directors The board of directors of AMIPL, as on the date of this Prospectus, are as follows:

S. No. Name Designation

1. Aravind Shivaputrappa Melligeri Director

2. Nayana Wali* Director

3. Parwatee Iyer* Director

4. Nikesh Anand Muthoor* Director *Nayana Wali, Parwatee Iyer, and Nikesh Anand Muthoor, being independent individuals, are not Relatives of our Individual Promoter, Aravind Shivaputrappa Melligeri.

377Shareholding pattern The shareholding pattern of AMIPL, as on the date of this Prospectus, is as follows:

S. No. Name of shareholder Number of shares bearing Percentage of shareholding face value of USD 0.01 each (%) Class A shares

1. Aequs Inc. 2,988,816,281 99.99% Class B shares

2. Aravind Shivaputrappa Melligeri 100 Negligible Total 2,988,816,381 100.00% Details of change in control There has been no change in control of AMIPL in the three years preceding the filing of this Prospectus.

Promoter Aequs Inc. holds 2,988,816,281 Class A shares constituting 99.99% shareholding in AMIPL.

Our Company confirms that the PAN, bank account number, corporate registration number of AMIPL and address of the Registrar of Companies, Mauritius where AMIPL is registered shall be submitted to the Stock Exchanges at the time of filing this Prospectus.

Melligeri Private Family Foundation (“MPFF”) Corporate information MPFF was formed pursuant to a trust deed dated February 10, 2011, amended pursuant to an amended indenture of trust dated April 20, 2015.

The trustee of MPFF is Mellwood Trustee Services Private Limited (“MTSPL”), which is an independent third- party trustee company. Further, the directors and shareholders of MTSPL are independent professionals are not related to any of our Promoters in any manner.

The settlors of MPFF are Jagadish Shivaputrappa Melligeri and late Anasuya Melligeri. The discretionary beneficiaries of MPFF are Nirmala Melligeri (spouse of Jagadish Shivaputrappa Melligeri) and Shaila Melligeri (spouse of Venkatesh Shivaputrappa Melligeri).

The registered office of MPFF is located at No. 6/1, 1st Cross, Kumara Park West, Seshadripuram, Bengaluru 560 020, Karnataka, India.

The overall objective of MPFF is utilization of the trust corpus and the income generated thereon for the benefit and maintenance of the beneficiaries and such other objects.

Protector committee The protector committee of MPFF, as on the date of this Prospectus, are as follows:

S. No. Name Designation

1. Aravind Shivaputrappa Melligeri Protector

2. Nayana Wali* Protector * Nayana Wali, being an independent individual, is not a Relative of our Individual Promoter, Aravind Shivaputrappa Melligeri.

Details of change in control There has been no change in control of MPFF in the three years preceding the filing of this Prospectus.

Our Company confirms that the PAN and bank account number along with the address of the principal place of business of MPFF shall be submitted to the Stock Exchanges at the time of filing this Prospectus.

The Melligeri Foundation (“TMF”) Corporate information 378TMF is an entity limited by guarantee incorporated on May 21, 2019. Its corporate identification number is MC- 351584 and its registered office is situated at MaplesFS Limited, P O Box 1093, Queensgate House, Grand Cayman, KY1-1102, Cayman Islands.

TMF functions as a foundation company in accordance with the laws of Cayman Islands with the below mentioned purposes/ objects. Further, there are no individuals identified as the beneficiaries of TMF.

Nature of business TMF is authorised to (i) act as a holding company and an investment company, with no restriction on the objects or operations of its subsidiaries and investees or on the nature of its or their investments; (ii) to do all such things incidental or conducive to the aforementioned objects.

Board of directors The board of directors of TMF, as on the date of this Prospectus, are as follows:

S. No. Name Designation

1. Nayana Wali* Director

2. Unni Krishnan* Director *Nayana Wali and Unni Krishnan, being independent individuals, are not Relatives of our Individual Promoter, Aravind Shivaputrappa Melligeri.

Supervisory committee The supervisory committee of TMF, as on the date of this Prospectus, are as follows:

S. No. Name Designation

1. Aravind Shivaputrappa Melligeri Supervisor

2. Nayana Wali* Supervisor

3. Manu Sawkar* Supervisor *Nayana Wali and Manu Sawkar, being independent individuals, are not Relatives of our Individual Promoter, Aravind Shivaputrappa Melligeri.

Shareholding pattern TMF is an entity limited by guarantee and does not have any share capital.

Details of change in control There has been no change in control of TMF in the three years preceding the filing of this Prospectus.

Promoter As on date of this Prospectus, there are no natural persons holding 15% or more of TMF’s voting rights.

TMF does not hold a permanent account number. Our Company confirms that the corporate registration number of TMF shall be submitted to the Stock Exchanges at the time of filing this Prospectus .

Details regarding change in control of our Company Our Promoters are Aravind Shivaputrappa Melligeri, AMIPL, MPFF and TMF. Our Promoters have been identified as the Promoters pursuant to a resolution passed by our Board dated May 30, 2025.

There has been no change in control of our Company during the last five years immediately preceding the date of this Prospectus.

Interests of our Promoters i. Our Promoters are interested in our Company to the extent (i) that they have promoted our Company; and (ii) that they hold any direct or indirect shareholding in our Company, and any dividends or any other distributions payable in respect thereof, as applicable. For details of shareholding of our Promoters in our Company, see “Capital Structure – Notes to Capital Structure – History of build-up of Promoters’ shareholding and lock-in of Promoters’ shareholding – Build-up of Promoters’ shareholding in our 379Company” on page 127. For details of the interests of Aravind Shivaputrappa Melligeri as a Director, see “Our Management – Interest of Directors” on page 365.

ii. Our Promoters have no interest in any property acquired by our Company during the three years preceding the date of this Prospectus, or proposed to be acquired, or in any transaction by our Company for acquisition of land, construction of building or supply of machinery.

iii. Our Promoters may be deemed to be interested in the contracts, agreements/ arrangements entered into or to be entered into by our Company with any company which is promoted or controlled by them, in which they hold shares or in which they are a member or in the case of Aravind Shivaputrappa Melligeri, in which he holds directorships or any partnership firm in which he is a partner. For further details, please see “Summary of the Offer Document – Summary of related party transactions” and “History and Certain Corporate Matters – Details of the shareholders’ agreements” on pages 24 and 340, respectively.

iv. No sums have been paid or agreed to be paid to our Promoters or to the firms or companies in which our Promoters are interested as members in cash or shares or otherwise by any person, either to induce them to become or to qualify them as directors or otherwise for services rendered by such Promoters or by such firms or companies in connection with the promotion or formation of our Company.

Payment or benefits to our Promoters or the members of our Promoter Group Except as stated in “Restated Consolidated Financial Information – Note 35 – Related Party Transactions” on page 471, no amount or benefits have been paid or given to our Promoters or the members of the Promoter Group during the two years preceding the date of this Prospectus nor is there any intention to pay or give any amount or benefit to our Promoters or the members of our Promoter Group.

Material guarantees given by our Promoters to third parties with respect to Equity Shares As on the date of this Prospectus, our Promoters have not given any material guarantees to any third party with respect to the Equity Shares.

Companies or firms with which our Promoters have disassociated in the last three years Our Promoters have not disassociated themselves from any company or firm in the three years immediately preceding the date of this Prospectus.

Promoter Group Natural persons who are part of the Promoter Group The natural persons who are part of the Promoter Group (due to their relationship with our Individual Promoter),

are as follows:

Name of Promoter Name Relationship Akkamahadevi Melligeri Spouse Jagadish Shivaputrappa Melligeri Brother Venkatesh Shivaputrappa Melligeri Brother Megha Aravind Melligeri Daughter Aravind Shivaputrappa Akhil Aravind Melligeri Son Melligeri Nikhil Aravind Melligeri Son Basavant Appanna Patil Spouse’s brother Babasaheb Appanna Patil Spouse’s brother Vijaya Basavaraj Sugandhi Spouse’s sister Leela B Naikar Spouse’s sister The companies, bodies corporate, HUFs, trusts and firms (other than our Corporate Promoter) forming a part of

our Promoter Group are as follows:

1. Aequs Inc.;

2. Arabian Private Adventure Co. LLC;

3803. Ask Air Lease LLC;

4. Jayaalaxmi Mineral Private Limited;

5. Let’s Service Automotive Technologies Private Limited;

6. Mayflower Investments LLC;

7. Melligeri Family Irrevocable Trust;

8. Melligeri Family Trust;

9. Melligeri Investments LLC;

10. MFO Advisory Services LLP;

11. MFRE Properties Private Trust;

12. MFRE Taris LLC;

13. MFRE Texas Holdings LLC;

14. Nandi Estate Developers and Builders; and

15. Naveen Developers and Builders.

381DIVIDEND POLICY The declaration and payment of dividend on our Equity Shares, if any, will be recommended by our Board and approved by our Shareholders, at their discretion, subject to the provisions of our Articles of Association and the applicable laws including the Companies Act 2013 together with the applicable rules notified thereunder, as amended. The dividend policy of our Company was approved and adopted by our Board on May 8, 2025.

In accordance with the dividend policy, the declaration and payment of dividend, if any, will depend on a number of internal factors, including but not limited to profits of our Company, present and future expenditure plans of the company including organic / inorganic growth opportunities, cost of borrowings and financial commitments with respect to the outstanding borrowings & interest thereon, financial requirement for business expansion and/or diversification, acquisition of new businesses, cash flows, any other significant developments or corporate action (including but not limited to bonus issue, buy back of shares, capital restructuring, debt reduction and capitalisation of shares) that require cash investments, and other factors considered relevant by our Board. In addition, the dividend, if any, will also depend on a number of external factors including but not limited to applicable laws and regulations including taxation laws, economic conditions, regulatory changes and prevalent market practices. For details in relation to risks involved in this regard, see “Risk Factors – We cannot assure payment of dividends on the Equity Shares in the future and our ability to pay dividends in the future will depend upon future earnings, financial condition, cash flows, working capital requirements and capital expenditures.” on 85.

Accordingly, our Company may not distribute dividend when there is absence or inadequacy of profits. Our Company may also, from time to time, pay interim dividends. The declaration and payment of dividends if any, will be recommended by our Board and approved by our Shareholders, at their discretion, subject to the provisions of the Articles of Association of our Company, Companies Act 2013, including the rules notified thereunder and other applicable laws.

We have neither declared nor paid any dividends on the Equity Shares in any of the three preceding Financial Years, or in the six months period ended September 30, 2025 and from October 1, 2025 until the date of this Prospectus.

382SECTION V – FINANCIAL INFORMATION RESTATED CONSOLIDATED FINANCIAL INFORMATION Particulars Page Examination report of the Statutory Auditors on the Restated Consolidated Financial Information 384 Restated Consolidated Financial Information 395 383INDEPENDENT AUDITOR’S EXAMINATION REPORT ON RESTATED CONSOLIDATED FINANCIAL INFORMATION The Board of Directors Aequs Limited (formerly known as Aequs Private Limited) Aequs Tower, No. 55, Whitefield Main Road, Mahadevapura Post, Bengaluru – 560048, Karnataka, India Dear Sirs/Madams,

1. We B S R & Co. LLP, Chartered Accountants have examined the attached Restated Consolidated Financial Information of Aequs Limited (formerly known as Aequs Private Limited) (the “Company” or the “Issuer”), its Aequs Stock Option Plan Trust and its subsidiaries (the Company, its Aequs Stock Option Plan Trust and its subsidiaries together referred to as the “Group”), its associate and its joint ventures, comprising the restated consolidated statement of assets and liabilities as at 30 September 2025, 30 September 2024, 31 March 2025, 31 March 2024 and 31 March 2023, the restated consolidated statements of profit and loss (including other comprehensive income), the restated consolidated statement of changes in equity, the restated consolidated statement of cash flows for the six months period ended 30 September 2025 and 30 September 2024 and for the years ended 31 March 2025, 31 March 2024 and 31 March 2023, the material accounting policies, and other explanatory information and notes (collectively, the “Restated Consolidated Financial Information”), as approved by the Board of Directors of the Company at their meeting held on November 14, 2025 for the purpose of inclusion in the Red Herring Prospectus (“RHP”) and Prospectus prepared by the Company in connection with its proposed initial public offer of equity shares (“Proposed IPO”) prepared in terms of the requirements of:

a) Section 26 of Part I of Chapter III of the Companies Act, 2013, as amended (the “Act”); b) The Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended (“ICDR Regulations”); and c) The Guidance Note on Reports in Company Prospectuses (Revised 2019) issued by the Institute of Chartered Accountants of India (“ICAI”) (the “Guidance Note”);

2. The Company’s Board of Directors is responsible for the preparation of the Restated Consolidated Financial Information for the purpose of inclusion in the RHP and Prospectus to be filed with Securities and Exchange Board of India (“SEBI”), BSE Limited (“BSE”) and National Stock Exchange of India Limited (“NSE”) where the equity shares are proposed to be listed (the “NSE” together with “BSE”, the “Stock Exchanges”) and Registrar of Companies, Karnataka, situated at Bangalore in connection with the Proposed IPO. The Restated Consolidated Financial Information have been prepared by the management of the Company on the basis of preparation stated in Note 2 to the Restated Consolidated Financial Information. The responsibility of respective Board of Directors of the companies included in the Group and of its associate and joint ventures includes designing, implementing and maintaining adequate internal control relevant to the preparation and presentation of the Restated Consolidated Financial Information. The respective Board of Directors are also responsible for identifying and ensuring that the Group and its associate and joint ventures complies with the Act, ICDR Regulations and the Guidance Note.

3. We have examined such Restated Consolidated Financial Information taking into consideration: a) The terms of reference and terms of our engagement agreed upon with you in accordance with our engagement letter dated 10 April 2025 as amended vide addendum to the engagement letters dated 28 May, 2025, and 11 November, 2025, in connection with the Proposed IPO of equity shares of the Issuer;

b) The Guidance Note. The Guidance Note also requires that we comply with the ethical requirements of the Code of Ethics issued by the ICAI;

384c) Concepts of test checks and materiality to obtain reasonable assurance based on verification of evidence supporting the Restated Consolidated Financial Information; and d) The requirements of Section 26 of the Act and the ICDR Regulations. Our work was performed solely to assist you in meeting your responsibilities in relation to your compliance with the Act, the ICDR Regulations, and the Guidance Note in connection with the Proposed IPO.

4. The Restated Consolidated Financial Information have been compiled by the management from: a) Audited special purpose consolidated interim financial statements of the Group and its joint ventures as at and for the six months period ended 30 September 2025 and 30 September 2024 prepared in accordance with the basis of preparation as described in Note 2 to the special purpose consolidated interim financial statements (the “special purpose consolidated interim financial statements”), which have been approved by the Board of Directors at their meetings held on 14 November 2025;

b) Audited consolidated financial statements of the Group and joint ventures as at and for the years ended 31 March 2025 and 31 March 2024, prepared in accordance with the Indian Accounting Standards (referred to as “Ind AS”) as specified under Section 133 of the Act read with Companies (Indian Accounting Standards) Rules 2015, as amended, and other accounting principles generally accepted in India, which have been approved by the Board of Directors at their meeting held on 12 August 2025 and 4 October 2024, respectively; and c) Audited consolidated financial statements of the Group and its associate and joint ventures as at and for the year ended 31 March 2023 prepared in accordance with Ind AS, as specified under

Section 133 of the Act read with Companies (Indian Accounting Standards) Rules 2015, as amended, and other accounting principles generally accepted in India, which have been approved by the Board of Directors at their meeting held on 23 September 2023.

5. For the purpose of our examination, we have relied on: a) Auditor’s report issued by us dated 14 November 2025 on the special purpose consolidated interim financial statements of the Group and its joint ventures as at and for the six months period ended 30 September 2025 and 30 September 2024 respectively as referred in Paragraph 4 (a) above;

b) Auditor’s reports issued by us dated 30 August 2025 and 4 October 2024 on the consolidated financial statements of the Group and its joint ventures as at and for the years ended 31 March 2025 and 31 March 2024, respectively, as referred in Paragraph 4 (b) above. The auditor’s report on the consolidated financial statements of the Group and its joint ventures as at and for the year ended 31 March 2024 included the following Emphasis of Matter paragraph and Other Matter paragraph (as referred in Annexure VI of the Restated Consolidated Financial Information):

Emphasis of Matter We draw attention to Note 9(i) to the consolidated financial statements in relation to a guarantee issued by the Company's subsidiary and certain payments made by the Company's subsidiary under such guarantees on behalf of a foreign subsidiary in respect of which the Company's subsidiary is in discussions with the Authorised Dealer to evaluate the compliance requirements under Foreign Exchange Management Act, 1999 and regulations thereunder (FEMA Regulations), if any. Pending such evaluation, no adjustments have been made to the financial statements.

Our opinion is not modified in respect of this matter.

Other Matter The consolidated financial statements of the Group, its associate and joint ventures for the year ended 31 March 2023 were audited by the predecessor auditor who had expressed an unmodified opinion on 23 September 2023.

385c) Auditor’s report issued by Price Waterhouse Chartered Accountants LLP (the “Previous Auditor”) dated 23 September 2023 on the consolidated financial statements of the Group and its associate and joint ventures as at and for the year ended 31 March 2023, as referred in Paragraph 4(c) above, The auditor’s report issued by the Previous Auditor on the consolidated financial statements of the Group and its associate and its joint ventures as at and for the year ended 31 March 2023 included the following Emphasis of Matter paragraph (as referred in Annexure VI of the Restated Consolidated Financial Information):

Emphasis of Matter

(v) We draw your attention to Note 51 in the financial statements regarding the amounts paid by the Company’s subsidiary directly to a bank in India on behalf of a foreign associate entity, aggregating to Rs. 118 million (which has been fully impaired) as at 31 March 2023, for which the Company’s subsidiary has given a guarantee in an earlier year. Subsequent to the year end, the Company’s subsidiary has intimated these transactions to the Authorised Dealer Bank and sought guidance on implications, if any, under The Foreign Exchange Management Act, for which response is awaited.

(vi) We draw your attention to Note 52 in the financial statements regarding non-settlement of foreign currency payables amounting to Rs. 1 million as at 31 March 2023 which are due for more than three years and Rs. 7 million as at 31 March 2023 which are outstanding for more than six months but less than three years from the date of imports.

This is beyond the period stipulated under the Reserve Bank of India Master Direction on Import of Goods and Services vide FED Master Direction No. 17/2016-17 dated 1 January 2016 (as amended). The Company’s subsidiary has made necessary application to the Authorised dealer Bank, seeking approval from RBI for extension of time limit to settle the outstanding amount.

(vii) We draw your attention to Note 53 in the financial statements regarding non-settlement of foreign currency payables amounting to Rs. 2 million as at 31 March 2023 which are due for more than three years and Rs. 41 million as at 31 March 2023 which are outstanding for more than six months but less than three years from the date of imports.

This is beyond the period stipulated under the Reserve Bank of India Master Direction on Import of Goods and Services vide FED Master Direction No. 17/2016-17 dated 1 January 2016 (as amended). The Company’s subsidiary has made necessary application to the Authorised dealer Bank, seeking approval from RBI for extension of time limit to settle the outstanding amount.

(viii) We draw attention to Note 54 regarding preparation of financial statements of one of the Company’s subsidiary on a realisable value basis for reasons stated therein.

Our opinion is not modified in respect of above matters. (Notes 51, 52, 53 and 54 referred above has been reproduced as Note 46, 47, 48 and 49 respectively to the Restated Consolidated Financial Information in Annexure VI).

The audit for the financial year ended 31 March 2023 was conducted by the Company’s Previous Auditor, and accordingly reliance has been placed on the restated consolidated statement of assets and liabilities as at 31 March 2023 and the restated consolidated statements of profit and loss (including other comprehensive income), the restated consolidated statement of changes in equity, the restated consolidated statement of cash flows for the year ended 31 March 2023, the material accounting policies and other explanatory information (collectively, the “2023 Restated Consolidated Financial Information”) examined by them for the said year. The examination report included for the said year is based solely on the report submitted by the Previous Auditor. They have also confirmed that the 2023

Restated Consolidated Financial Information: a) have been prepared after incorporating adjustments for the changes in accounting policies, material errors and regrouping/reclassifications retrospectively in the financial year ended 31 March 2023 to reflect the same accounting treatment as per the accounting policies and grouping/classifications followed as at and for the six month period ended 30 September 2025;

386b) do not require any adjustments for the matter giving rise to modification mentioned in above paragraph. Moreover, matters in the Auditor’s report, which do not require any corrective adjustments in the 2023 Restated Consolidated Financial Information have been disclosed in Part B of Annexure VI of the 2023 Restated Consolidated Financial Information; and c) have been prepared in accordance with the Act, ICDR Regulations and the Guidance Note.

6. As indicated in our auditor’s reports referred above: i) we did not audit the financial statements of seven subsidiaries for the six month periods ended 30 September 2024 and six subsidiaries for the six months period ended 30 September 2025 and for the years ended March 31, 2025 and March 31, 2024 respectively included in the Group and its joint ventures as mentioned in Annexure A(ii), whose share of total assets (before consolidation adjustments), total revenues (before consolidation adjustments), net cash inflows / (outflows) (before consolidation adjustments) included in the consolidated financial statements for the period/years respectively, is tabulated below, which have been audited by other auditors (details furnished in Annexure A(ii)) whose reports have been furnished to us by the Company’s management and our opinion on the consolidated financial statements, in so far as it relates to the amounts and disclosures included in respect of these subsidiaries, is based solely on the

reports of the other auditors: (Rs in million) Particulars As at/ for the As at/ for the As at/ for the year As at/ for the year period ended period ended ended ended September 30, September 30, March 31, 2025 March 31, 2024 2025 2024 Total assets (before 3,822 3,653 3,814 3,186 consolidation adjustments) Total revenue (before 1,003 968 2,015 941 consolidation adjustments) Net cash inflows/ (100) (43) 27 (6)

(outflows) (before consolidation adjustments) One of the subsidiary for the six months period ended 30 September 2025 and 30 September 2024 and for the year ended 31 March 2025 is located outside India whose financial statements and other financial information have been prepared in generally accepted accounting principles of its country, which has been audited by other auditors under generally accepted auditing standards applicable in its country and we have audited only the conversion adjustments prepared by the management of the Company from the generally accepted accounting principles of its country to the generally accepted accounting principles of India.

Our opinion on the consolidated financial statements is not modified in respect of these matters. ii) we did not audit the financial statements of six subsidiaries for the year ended March 31, 2024 whose share of total assets (before consolidation adjustments), total revenues (before consolidation adjustments), net cash (outflows) (before consolidation adjustments) included in the consolidated financial statements respectively, for the relevant year respectively is tabulated below, which have not been audited by us or by other auditors as listed in Annexure A(iii) and whose financial information have been furnished to us by the Company’s management and our opinion on the consolidated financial statements, in so far as it relates to the amounts and disclosures included in respect of these components, is based solely on such unaudited financial information. In our opinion and according to the information and explanations given to us by the management, these financial statements are not material to the Group.

(Rs in million) Particulars As at/ for the year ended March 31, 2024 Total assets (before consolidation adjustments) 3,277 Total revenue(before consolidation adjustments) Nil Net cash inflows/(outflows) (before consolidation adjustments) (68) 387Our opinion on the consolidated financial statements is not modified in respect of these matters.

The other auditors of the subsidiaries, as listed in Annexure A(iv), have examined the restated consolidated financial information/ restated financial information and have confirmed that the restated consolidated financial information/ restated financial information:

a) have been prepared after incorporating adjustments for the changes in accounting policies, material errors and regrouping/reclassifications retrospectively, in the financial year ended 31 March 2025, 31 March 2024 and six months period ended 30 September 2024, to reflect the same accounting treatment as per the accounting policies and grouping/classifications followed as at and for the six months period ended 30 September 2025;

b) does not contain any modification requiring adjustments. Moreover, matters in the Auditor’s report, which do not require any corrective adjustments in the restated financial information have been disclosed in Part B of Annexure VI of the restated financial information; and c) have been prepared in accordance with the Act, ICDR Regulations, the Guidance Note.

7. Based on examination report dated 14 November 2025 provided by the Previous Auditor and the audit report on the consolidated financial statements issued by the Previous Auditor included following other

matters: a) We did not audit the financial statements of one subsidiary located outside India, whose share of total assets, net liabilities, total revenue, total comprehensive loss (comprising of loss and other comprehensive income) and net cash inflows/(outflows) included in the Consolidated Financial Statements, for the relevant year is tabulated below, which have been prepared in accordance with accounting principles generally accepted in its country and have been audited by other auditor for the year ended 31 March 2023, under generally accepted auditing standards applicable in their country. The Company’s management has converted the financial statements of such subsidiary located outside India from the accounting principles generally accepted in its country to the accounting principles generally accepted in India. We have audited these conversion adjustments made by the Company’s management. Our opinion on the consolidated financial statements in so far as it relates to the financial information of such subsidiary located outside India, including other information, is based on the report of other auditors and the

conversion adjustments prepared by the management of the Company and audited by us: (Rs in million) Particulars As at and for the year ended March 31, 2023 Total assets 801 Net liabilities 400 Total revenues 656 Total comprehensive loss 133 (comprising of loss and other comprehensive income) Net cash inflows / (outflows) (53) Further, the restated financial information of one subsidiary located outside India for the year ended 31 March 2023, whose share of total assets, net liabilities, total revenue, total comprehensive loss (comprising of loss and other comprehensive income) and net cash inflows / (outflows) included in the Restated Consolidated Financial Information for relevant years, which have not been examined by us, are tabulated below. These restated financial information have been examined by other auditor whose examination report have been furnished to us by the Management, and our opinion on the Restated Consolidated Financial Information, in so far as it relates to the amounts and disclosures included in respect of such subsidiary is based solely on the examination report of other auditor.

(INR In Million) Particulars As at and for the year ended March 31, 2023 Total Assets 801 388Particulars As at and for the year ended March 31, 2023 Net Liabilities 400 Total Revenue 656 Total comprehensive loss (comprising of loss and other 133 comprehensive income) Net cash inflows/ (outflows) (53) Our opinion on the consolidated financial statements was not modified in respect of the above matter with respect to our reliance on the work done and the reports of other auditor.

b) We did not audit the financial statements of certain subsidiaries as at and for the year ended 31 March 2023, whose share of total assets, net liabilities, total revenue, total comprehensive loss (comprising of loss and other comprehensive income) and net cash inflows/ (outflows) included in the consolidated financial statements for relevant years are tabulated below. The consolidated financial statements as at and for the year ended 31 March 2023 also include the Group’s share of total comprehensive loss (comprising of loss and other comprehensive income), in respect of 1 associate and 1 joint venture, respectively, whose financial statements for the year ended 31 March 2023, have not been audited as tabulated below. These financial statements are unaudited and have been furnished to us by the Management, and our opinion on the consolidated financial statements in so far as it relates to the amounts and disclosures included in respect of these subsidiaries, associate and joint venture is based solely on such unaudited financial statements.

In our opinion and according to the information and explanations given to us by the management, these financial statements are not material to the Group, its joint ventures and

associate:

In case of subsidiaries (INR in Million) Particulars As at and for the year ended March 31, 2023 Number of Subsidiaries (Number) 12 Total assets 3,943 Net liabilities 602 Total revenues 911 Total comprehensive loss 406 (comprising of loss and other comprehensive income) Net cash inflows / (outflows) 77 In case of associate and joint venture (INR in Million) Particulars As at and for the year ended March 31, 2023 Associate Joint venture Total comprehensive loss (comprising of loss and - 10 other comprehensive income) Further, the restated financial information of certain subsidiaries as at and for the year ended March 31, 2023, whose share of total assets, net liabilities, total revenue, total comprehensive loss (comprising of loss and other comprehensive income) and net cash inflows/ (outflows) included in the restated consolidated financial information for relevant years, which have not been examined by us, are tabulated below. The restated consolidated financial information also includes the Group’s share of total comprehensive loss (comprising of loss and other comprehensive income), in respect of 1 associate and 1 joint venture, respectively, whose financial information for the year ended March 31, 2023 has not been examined by us as tabulated below. These financial information are unexamined and have been furnished to us by the Management, and our opinion on the restated consolidated financial information in so far as it relates to the amounts and disclosures included in respect of these subsidiaries, associate and joint venture is based solely on such unexamined financial information. In our opinion and according to the information and explanations given to us by the management, these financial information are not material to the Group, its joint ventures and associate.

In case of subsidiaries 389(INR in Million) Particulars As at and for the year ended March 31, 2023 Number of Subsidiaries (Number) 12 Total assets 3,943 Net liabilities 602 Total revenues 911 Total comprehensive loss 406 (comprising of loss and other comprehensive income) Net cash inflows / (outflows) 77 In case of associate and joint venture (INR in Million) Particulars As at and for the year ended March 31, 2023 Associate Joint venture Total comprehensive loss (comprising of loss and - 10 other comprehensive income)

8. Based on our examination and according to the information and explanations given to us and also as per the reliance placed on the examination report submitted by the Previous Auditor and other auditors, we

report that the Restated Consolidated Financial Information: a) have been prepared after incorporating adjustments for the changes in accounting policies, material errors and regrouping/reclassifications retrospectively, in the financial years ended 31 March 2025, 31 March 2024 and 31 March 2023 and six months period ended 30 September 2024, to reflect the same accounting treatment as per the accounting policies and grouping/classifications followed as at and for the six months period ended 30 September 2025;

b) do not require any adjustments for the matter giving rise to modification mentioned in paragraph 5 above. Moreover, matters in the Auditor’s report, which do not require any corrective adjustments in the Restated Consolidated Financial Information have been disclosed in Part B of Annexure VI of the Restated Consolidated Financial Information; and c) have been prepared in accordance with the Act, ICDR Regulations, Guidance Note.

9. We have not audited any financial statements of the Group and its joint ventures as of any date or for any period subsequent to 30 September 2025. Accordingly, we express no opinion on the financial position, results of operations, cash flows and statement of changes in equity of the Group and its joint ventures as of any date or for any period subsequent to 30 September 2025.

10. The Restated Consolidated Financial Information do not reflect the effects of events that occurred subsequent to the respective dates of the reports on the consolidated financial statements mentioned in paragraph 5 above.

11. This report should not in any way be construed as a reissuance or re-dating of any of the previous audit reports issued by us or the Previous Auditor, nor should this report be construed as a new opinion on any of the financial statements referred to herein.

12. We have no responsibility to update our report for events and circumstances occurring after the date of the report.

13. Our report is intended solely for use of the Board of Directors for inclusion in the RHP and Prospectus to be filed with SEBI, Stock Exchanges and Registrar of Companies, Karnataka, situated at Bangalore in connection with the Proposed IPO. Our report should not be used, referred to, or distributed for any other purpose except with our prior consent in writing. Accordingly, we do not accept or assume any liability or any duty of care for any other purpose or to any other person to whom this report is shown or into whose hands it may come without our prior consent in writing.

390For B S R & Co. LLP Chartered Accountants Firm’s Registration Number:101248W/W-100022 Sampad Guha Thakurta Partner

Membership Number:060573

Place of Signature: Chennai UDIN: 25060573BMOKHM6186

Date: 14 November 2025 391Annexure A

(i) List of subsidiaries , associate and joint ventures of Aequs Limited (formerly known as Aequs Private Limited) SL Name of the Entity Indian/ Foreign Nature of relation No subsidiary 1 Aerostructure Manufacturing India Private Limited Indian Subsidiary 2 Aequs Engineered Plastics Private Limited Indian Subsidiary 3 Aequs Force Consumer Products Private Limited Indian Subsidiary 4 Aequs Consumer Products Private Limited Indian Subsidiary 5 SQuAD Forging India Private Limited Indian Joint venture 6 Aerospace Processing India Private Limited Indian Joint venture 7 Aerostructure Assemblies India Private Limited Indian Subsidiary 8 Aequs Aero Machine Inc Foreign Subsidiary 9 Aequs Aerospace France SAS Foreign Subsidiary 10 Aequs Holdings France SAS Foreign Subsidiary 11 Aequs Toys Private Limited Indian Subsidiary 12 Koppal Toys Molding COE Private Limited Indian Subsidiary till 30 November 2024 13 Aequs Oil and Gas LLC Foreign Subsidiary 14 Aequs Aerospace BV Foreign Subsidiary 15 Aequs Toys Hong Kong Private Limited Foreign Subsidiary 16 Aequs Rajas Extrusion Private Limited Indian Subsidiary 17 Aequs Home Appliances Private Limited Indian Subsidiary till 26 (struck off w.e.f. 27 June 2025) June 2025 18 Aerospace Manufacturing Holdings Private Limited Indian Subsidiary 19 Aequs Aerospace LLC Foreign Subsidiary 20 Koppal Toys Tooling COE Private Limited Indian Subsidiary till 29 November 2024 21 Aequs Force Technology Company Limited Foreign Subsidiary till 27 December 2024 22 Aequs Stock Option Plan Trust Indian Subsidiary 23 SCI Du Champ De Pivoines Foreign Subsidiary till 31 March 2023 24 Bernar SAS Foreign Subsidiary till 31 March 2023 25 Aequs Cookware Private Limited Indian Joint venture effective from 30 September 2024 26 Aequs Foundation Indian Associate till 24 February 2024

(ii) Details of subsidiaries which are audited by other auditors for the respective period as referred to in the

audit report:

Sl No Particulars Type of Year ended Name of auditor subsidiary 1 Aerostructure Assemblies India Private Subsidiary 31 March 2025 M/s KG Acharya Limited 30 September & Co.

2024 30 September 2025 2 Aequs Aerospace France SAS Step down 31 March 2025 PKF Arsilon subsidiary 31 March 2024 30 September 2024 30 September 2025 3 Aequs Holdings France SAS Step down 31 March 2024 PKF Arsilon subsidiary 30 September 2024 30 September 2025 392Sl No Particulars Type of Year ended Name of auditor subsidiary 4 Aequs Toys Private Limited Subsidiary 31 March 2025 M/s KG Acharya 31 March 2024 & Co.

30 September 2024 30 September 2025 5 Koppal Toys Molding COE Private Step down 31 March 2025 M/s KG Acharya Limited subsidiary 31 March 2024 & Co.

30 September 2024 30 September 2025 6 Aequs Rajas Extrusion Private Limited Step down 31 March 2025 Munshi & Co. subsidiary 31 March 2024 30 September 2024 30 September 2025 7 Aequs Home Appliances Private Limited Step down 31 March 2025 M/s KG Acharya (struck off w.e.f. 27 June 2025) subsidiary 31 March 2024 & Co.

30 September 2024 8 Aerospace Manufacturing Holdings Subsidiary 31 March 2025 M/s KG Acharya Private Limited 31 March 2024 & Co.

30 September 2024 30 September 2025

(iii) Details of subsidiaries which are unaudited for the respective period as referred to in the audit report:

Particulars Year ended Aequs Oil and Gas LLC 31 March 2024 Aequs Aerospace BV 31 March 2024 Aequs Toys Hong Kong Private Limited 31 March 2024 Aequs Aerospace LLC 31 March 2024 Koppal Toys Tooling COE Private Limited 31 March 2024 Aequs Force Technology Company Limited 31 March 2024

(iv) Details of subsidiaries which are examined by other auditors for the respective period referred to in our examination report Particulars Years ended Name of auditor Aequs Oil and Gas LLC 31 March 2024 Manian & Rao Aequs Aerospace BV 31 March 2024 Manian & Rao Aequs Toys Hongkong Private Limited 31 March 2024 Manian & Rao Aequs Aerospace France SAS 31 March 2025 PKF Arsilon 31 March 2024 30 September 2024 30 September 2025 Aequs Holding France SAS 31 March 2025 PKF Arsilon 31 March 2024 30 September 2024 30 September 2025 Aequs Home Appliances Private Limited (struck off 31 March 2024 M/s KG Acharya & Co.

w.e.f. 27 June 2025) 30 September 2024 31 March 2025 Aequs Manufacturing Holdings Private Limited 31 March 2025 M/s KG Acharya & Co.

31 March 2024 30 September 2024 30 September 2025 393Particulars Years ended Name of auditor Aerostructure Assemblies India Private Limited 31 March 2025 M/s KG Acharya & Co.

31 March 2024 30 September 2024 30 September 2025 Aequs Toys Private Limited 31 March 2025 M/s KG Acharya & Co.

31 March 2024 30 September 2024 30 September 2025 Koppal Toys Molding COE Private Limited 31 March 2025 M/s KG Acharya & Co.

31 March 2024 30 September 2024 30 September 2025 394Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure I - Restated Consolidated Statement of Assets and Liabilities (All amounts are in INR Millions, except share data, unless otherwise stated) Particulars Notes As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 ASSETS Non-current assets Property, plant and equipment 4 4 ,024.29 1 ,714.24 1 ,668.82 1 ,749.45 1 ,815.31 Right-of-use assets 5 3 ,126.69 3 ,911.91 3 ,349.25 4 ,112.40 4 ,168.90 Capital work-in-progress 4A 3 ,461.44 2 ,722.14 3 ,950.90 1 ,753.85 1 6.00 Investment property 4B - - - - 6 3.94 Goodwill 6 172.56 172.56 1 72.56 6 55.21 6 55.21 Other intangible assets 6 5 3.02 7 0.22 6 1.23 8 5.43 1 34.00 Intangible assets under development 6A - - - - 4 .13 Investments accounted for using equity method 7 8 13.07 716.66 7 68.12 6 21.61 5 74.90 Financial assets Investments 8 (i) 0 .94 0 .86 0 .85 0 .83 0 .81 Loans 9 (i) - - - - - Other financial assets 9 (v) 780.09 435.64 7 06.24 3 94.52 3 37.43 Contract assets 12 5 1.02 - - - - Deferred tax assets (net) 39 331.07 313.69 3 31.70 3 24.47 3 09.00 Current tax assets 6 .67 32.02 1 9.04 1 4.26 2 7.33 Other non-current assets 10 2 28.99 174.05 1 33.08 1 59.02 7 8.53 Total non-current assets 13,049.85 1 0,263.99 1 1,161.79 9 ,871.05 8 ,185.49 Current assets Inventories 11 4 ,591.24 4 ,187.14 4 ,082.69 3 ,541.17 2 ,984.87 Financial assets Investments 8 (ii) - 371.28 - 2 97.15 - Trade receivables 9 (ii) 1 ,812.56 1 ,621.85 1 ,566.04 1 ,368.85 1 ,071.28 Cash and cash equivalents 9 (iii) 5 71.93 657.17 6 09.43 7 92.74 5 12.87 Bank balances other than above 9 (iv) 226.31 754.75 1 88.48 1 ,727.01 6 0.81 Other financial assets 9 (v) 1 24.32 11.01 1 28.72 1 5.15 3 3.19 Contract assets 12 2 6.65 3 4.26 5 2.89 2 4.81 0 .58 Other current assets 10 940.46 729.67 8 08.22 5 88.20 3 17.75 Assets classified as held for sale 42 0 .19 3 .88 0 .14 3 .70 5 0.07 Total current assets 8 ,293.66 8 ,371.01 7 ,436.61 8 ,358.78 5 ,031.42 Total assets 2 1,343.51 1 8,635.00 1 8,598.40 1 8,229.83 1 3,216.91 EQUITY AND LIABILITIES EQUITY Equity share capital 13 6 ,050.02 4 ,247.59 5 ,818.29 4 ,247.59 4 ,247.58 Instruments entirely equity in nature 13A - 4 ,071.16 - 4 ,071.16 - Other equity 14 2 ,004.27 ( 908.27) 1 ,350.90 ( 153.14) ( 1,461.50) Equity attributable to owners of Aequs Limited (formerly known as Aequs Private Limited) 8 ,054.29 7 ,410.48 7 ,169.19 8 ,165.61 2 ,786.08 Non controlling interests 14 (9.41) ( 9.41) ( 9.41) ( 9.41) ( 113.56) Total equity 8 ,044.88 7 ,401.07 7 ,159.78 8 ,156.20 2 ,672.52 395Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure I - Restated Consolidated Statement of Assets and Liabilities (All amounts are in INR Millions, except share data, unless otherwise stated) Particulars Notes As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 LIABILITIES Non-current liabilities Financial liabilities Borrowings 15 (i) 2 ,073.92 1 ,214.18 1 ,424.39 8 55.08 1 ,253.17 Lease liabilities 5 2 ,694.70 3 ,397.76 2 ,785.57 3 ,506.82 3 ,377.90 Other financial liabilities 15 (ii) 6 1.08 5 .13 6 4.75 6 .38 6 .57 Provision for employee benefits 17 1 70.75 1 29.74 1 61.79 1 26.58 1 10.17 Other non-current liabilities 16 42.01 - 45.00 - 29.45 Contract liabilities 12 1 76.38 1 94.95 1 92.92 - - Total non-current liabilities 5 ,218.84 4 ,941.76 4 ,674.42 4 ,494.86 4 ,777.26 Current liabilities Financial liabilities Borrowings 15 (i) 3 ,261.19 2 ,633.68 2 ,946.23 2 ,063.73 2 ,208.22 Lease liabilities 5 6 58.67 5 66.33 6 94.28 5 63.68 5 19.96 Trade payables a.Total outstanding dues of micro enterprises and small enterprises; and 15 (iii) 6 5.01 3 2.19 6 5.70 9 .99 1 .63 b. Total outstanding dues of creditors other than micro enterprises and 15 (iii) 2 ,866.50 2 ,294.81 2 ,243.17 2 ,015.20 2 ,255.99 small enterprises Other financial liabilities 15 (ii) 5 41.89 3 69.98 4 00.25 4 96.00 2 64.50 Provision for employee benefits 17 8 0.71 6 5.63 6 5.57 5 4.83 4 5.20 Other current liabilities 16 1 68.45 2 02.33 1 52.83 1 91.88 2 95.49 Current tax liabilities (net) 7 1.63 1 7.19 3 5.16 60.92 - Contract liabilities 12 3 65.74 1 09.54 1 60.72 1 22.06 1 65.41 Liabilities directly associated with assets classified as held for sale 42 - 0 .49 0 .29 0 .48 1 0.73 Total current liabilities 8 ,079.79 6 ,292.17 6 ,764.20 5 ,578.77 5 ,767.13 Total liabilities 1 3,298.63 1 1,233.93 1 1,438.62 1 0,073.63 1 0,544.39 Total equity and liabilities 2 1,343.51 1 8,635.00 1 8,598.40 1 8,229.83 1 3,216.91 TheabovestatementshouldbereadwithmaterialaccountingpoliciesformingpartoftheRestatedConsolidatedFinancialInformation,NotestoRestatedConsolidatedFinancialInformationandStatementof Restated Adjustments to the Audited Consolidated Financial Information.

As per our report of even date attached. for B S R & Co. LLP for and on behalf of the Board of Directors of Chartered Accountants Aequs Limited (formerly known as Aequs Private Limited) ICAI Firm's Registration No. 101248W/W-100022 CIN: U80302KA2000PLC026760 Sampad Guha Thakurta Rajeev Kaul Aravind S. Melligeri Partner Managing Director Executive Chairman and Chief Executive Officer Membership No.: 060573 DIN-01468590 DIN-00787735

Place: Chennai Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 Date: November 14, 2025 Dinesh Iyer Ravi Mallikarjun Hugar Chief Financial Officer Company Secretary M. No. - A20823

Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 396Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure II - Restated Consolidated Statement of Profit and Loss (All amounts are in INR Millions, except share data, unless otherwise stated) Particulars Notes Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Continuing operations Revenue from operations 18 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 Other income 19 283.86 165.33 346.07 232.30 284.07 Total income (A) 5,655.45 4,755.06 9,592.13 9,883.04 8,405.39 Expenses Cost of materials consumed 20 2,328.94 2,285.19 4,082.60 4,390.72 4,168.95 Purchases of stock-in-trade - - - - 20.70 Changes in inventories of finished goods and work-in-progress 21 (154.35) (314.98) (160.60) (224.67) (349.24) Employee benefits expense 22 927.57 762.12 1,587.41 1,434.08 1,446.39 Impairment losses/ (reversal) on financial assets 2.26 (9.00) 4.16 14.63 8.54 Other expenses 23 1,709.97 1,453.51 2,998.87 2,813.18 2,479.49 Total expenses (B) 4,814.39 4,176.84 8,512.44 8,427.94 7,774.83 Earningsfromcontinuingoperationsbeforefinancecost,depreciation andamortisation,shareofprofit/(loss)ofassociateandjointventures, 841.06 578.22 1,079.69 1,455.10 630.56 exceptional items and tax (A-B) Finance costs 24 357.51 278.59 589.01 638.06 646.07 Depreciation and amortisation expense 25 571.55 529.20 1,034.06 1,076.85 995.16 Loss from continuing operations before exceptional items, share of (88.00) (229.57) (543.38) (259.81) (1,010.67) profit/(loss) of associate and joint ventures, and tax Share of net profit/(loss) of associate and joint ventures accounted for 40 33.83 53.16 85.24 51.52 (8.74) using the equity method, net of tax Exceptional items gain / (loss) 26 - (482.65) (482.65) 186.48 (7.36) Loss before tax from continuing operations (54.17) (659.06) (940.79) (21.81) (1,026.77) Income Tax expense - Current tax 39 109.91 67.58 148.88 115.13 12.02 - Deferred tax 39 2.76 (10.53) (65.48) (15.47) 48.47 Total tax expense 112.67 57.05 83.40 99.66 60.49 Loss from continuing operations (166.84) (716.11) (1,024.19) (121.47) (1,087.26) Discontinued operations

(Loss) / profit from discontinued operations before tax 42 (2.93) (0.89) 0.73 (20.97) (7.69)

(Loss) / profit from discontinued operations after tax (2.93) (0.89) 0.73 (20.97) (7.69) Loss for the period / year (169.77) (717.00) (1,023.46) (142.44) (1,094.95) Other comprehensive income / (loss) Items that will be reclassified to profit or loss - Exchange differences on translating financial statements of foreign 14 (262.73) (63.99) (49.37) (42.10) (66.38) operations - Items that will not be reclassified to profit or loss - Remeasurements of post-employment benefit obligations 0.04 0.03 (3.86) 3.08 12.73 -Shareofothercomprehensive incomeofjointventures andassociate - - - - (0.55) accounted for using equity method - Income tax relating to these items - - - - (2.16) Other comprehensive income / (loss) for the period / year, net of tax (262.69) (63.96) (53.23) (39.02) (56.36) Total comprehensive loss for the period / year, net of tax (432.46) (780.96) (1,076.69) (181.46) (1,151.31) Profit / (loss) attributable to:

Owners of Aequs Limited (formerly known as Aequs Private Limited) (169.77) (717.00) (1,023.46) (108.38) (988.26) Non controlling interests - 0.00 - (34.06) (106.69) (169.77) (717.00) (1,023.46) (142.44) (1,094.95) Other comprehensive income / (loss) attributable to:

Owners of Aequs Limited (formerly known as Aequs Private Limited) (262.69) (63.96) (53.23) (39.01) (51.97) Non controlling interests - - - (0.01) (4.39) (262.69) (63.96) (53.23) (39.02) (56.36) 397Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure II - Restated Consolidated Statement of Profit and Loss (All amounts are in INR Millions, except share data, unless otherwise stated) Particulars Notes Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Total comprehensive (loss) / income attributable to:

Owners of Aequs Limited (formerly known as Aequs Private Limited) (432.46) (780.96) (1,076.69) (147.39) (1,040.23) Non controlling interests - 0.00 - (34.07) (111.08) (432.46) (780.96) (1,076.69) (181.46) (1,151.31) Total comprehensive (loss) / income attributable to owners of Aequs Limited (formerly known as Aequs Private Limited) arising from:

Continuing operations (429.53) (780.07) (1,077.42) (160.49) (1,143.62) Discontinued operations (2.93) (0.89) 0.73 (20.97) (7.69) (432.46) (780.96) (1,076.69) (181.46) (1,151.31) Earningsperequityshareforprofitfromcontinuingoperationattributable 32 (0.29) (1.26) (1.80) (0.16) (2.42) toownersofAequsLimited(formerlyknownasAequsPrivateLimited) (Basic and Diluted - in INR) (Nominal value per share: ₹ 10) Earnings per equity share for profit from discontinued operation 32 (0.01) - 0.00 (0.04) (0.02) attributabletoownersofAequsLimited(formerlyknownasAequsPrivate Limited) (Basic and Diluted - in INR) (Nominal value per share: ₹ 10) Earnings per equity share for profit from discontinued & continuing 32 (0.30) (1.26) (1.80) (0.20) (2.44) operation attributable to owners of Aequs Limited (formerlyknown as Aequs Private Limited) (Basic and Diluted - in INR.) (Nominal value per TheabovestatementshouldbereadwithmaterialaccountingpoliciesformingpartoftheRestatedConsolidatedFinancialInformation,NotestoRestatedConsolidatedFinancialInformationandStatement of Restated Adjustments to the Audited Consolidated Financial Information.

As per our report of even date attached. for B S R & Co. LLP for and on behalf of the Board of Directors of Chartered Accountants Aequs Limited (formerly known as Aequs Private Limited) ICAI Firm's Registration No. 101248W/W-100022 CIN: U80302KA2000PLC026760 Sampad Guha Thakurta Rajeev Kaul Aravind S. Melligeri Partner Managing Director Executive Chairman and Chief Executive Officer Membership No.: 060573 DIN-01468590 DIN-00787735

Place: Chennai Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 Date: November 14, 2025 Dinesh Iyer Ravi Mallikarjun Hugar Chief Financial Officer Company Secretary M. No. - A20823

Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 398Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure III - Restated Consolidated Statement of Changes in Equity (All amounts are in INR Millions, except share data, unless otherwise stated) A. Equity share capital (refer note 13) Amount Balance as at April 01, 2022 3,959.58 Changes during the year 288.00 Balance as at March 31, 2023 4,247.58 Changes during the year 0.01 Balance as at March 31, 2024 4,247.59 Changes during the period - Balance as at September 30, 2024 4,247.59 Balance as at March 31, 2024 4,247.59 Changes during the year 1,570.70 Balance as at March 31, 2025 5,818.29 Changes during the period 231.73 Balance as at September 30, 2025 6,050.02 B. Instruments entirely equity in nature Compulsorily Convertible Preference Shares (CCPS) (refer note 13A) Amount Balance as at April 01, 2022 - Changes during the year - Balance as at March 31, 2023 - Changes during the year 4,071.16 Balance as at March 31, 2024 4,071.16 Changes during the period - Balance as at September 30, 2024 4,071.16 Balance as at March 31, 2024 4,071.16 Changes during the year (4,071.16) Balance as at March 31, 2025 - Changes during the period - Balance as at September 30, 2025 - (This space is intentionally left blank) 399Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure III - Restated Consolidated Statement of Changes in Equity (All amounts are in INR Millions, except share data, unless otherwise stated) C. Other equity and non-controlling interests (refer note 14) Other equity Attributable to owners of the Company Non Reserves and surplus Items of OCI Total other controlling Retained Securities Share option Revaluation Statutory Common Treasury Other Foreign equity interest earnings premium outstanding reserve reserve control shares reserves currency account capital translation reserve reserve Balance as at April 01, 2022 (6,139.86) 5,137.02 30.17 173.00 11.06 93.94 ( 265.09) 95.21 (178.95) ( 1,043.50) (2.48) Loss for the year (988.26) - - - - - - - - ( 988.26) (106.69) Other comprehensive income / (loss) for the year 12.17 - - - - - - - - 12.17 (4.39) Translation of financial statement of foreign operations - - - - - - - - (66.38) ( 66.38) - Total comprehensive income/(loss) for the year (976.09) - - - - - - - (66.38) ( 1,042.47) (111.08) Transactions with owners of the Company Premium on shares issued during the year - 551.20 - - - - - - - 551.20 - Employee stock option expense - - 22.01 - - - - - - 22.01 - Transfer of reserve relating to lapse of vested option 2.40 - ( 2.24) - - - - - - 0.16 - Share issue expenses - ( 2.36) - - - - - - - ( 2.36) - Total contributions and distributions 2.40 548.84 19.77 - - - - - - 571.01 - Financial guarantee received during the year - - - - - - - 53.46 - 53.46 - Sub total - - - - - - - 53.46 - 53.46 - Balance as at March 31, 2023 (7,113.55) 5,685.86 49.94 173.00 11.06 93.94 ( 265.09) 148.67 (245.33) ( 1,461.50) (113.56) Balance as at April 01, 2023 (7,113.55) 5,685.86 49.94 173.00 11.06 93.94 ( 265.09) 148.67 (245.33) ( 1,461.50) (113.56) Profit / (loss) for the year (108.38) - - - - - - - - ( 108.38) (34.06) Other comprehensive income / (loss) for the year 2.38 - - - - - - - - 2.38 - Translation of financial statement of foreign operations - - - - 0.10 - - - (42.10) ( 42.00) - Total comprehensive income/(loss) for the year (106.00) - - - 0.10 - - - (42.10) ( 148.00) (34.06) Transactions with owners of the Company Premium on shares issued during the year - 1,787.55 - - - - - - - 1,787.55 - Share issue expenses - ( 179.64) - - - - - - - ( 179.64) - Employee stock option expense - - 19.83 - - - - - - 19.83 - Transfer of reserve relating to lapse of vested option 10.00 - ( 9.63) - - - - - - 0.37 - Total contributions and distributions 10.00 1,607.91 10.20 - - - - - - 1,628.11 - Change in ownership interests Non controlling interests acquired during the year without a change in control (238.00) - - - - - - - - ( 238.00) 138.21 Total change in ownership interests (238.00) - - - - - - - - ( 238.00) 138.21 Financial guarantee received during the year - - - - - - - 66.25 - 66.25 - Transfer from revaluation reserve 173.00 - - ( 173.00) - - - - - - - Sub total 173.00 - - ( 173.00) - - - 66.25 - 66.25 - Balance as at March 31, 2024 (7,274.55) 7,293.77 60.14 - 11.16 93.94 ( 265.09) 214.92 (287.43) ( 153.14) (9.41) (This space is intentionally left blank) 400Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure III - Restated Consolidated Statement of Changes in Equity (All amounts are in INR Millions, except share data, unless otherwise stated) C. Other equity and non-controlling interests (refer note 14) (continued) Other equity Attributable to owners of the Company Non Reserves and surplus Items of OCI Total other controlling Retained Securities Share option Revaluation Statutory Common Treasury Other Foreign equity interest earnings premium outstanding reserve reserve control shares reserves currency account capital translation reserve reserve Balance as at April 01, 2024 (7,274.55) 7,293.77 60.14 - 11.16 93.94 ( 265.09) 214.92 (287.43) ( 153.14) (9.41) Profit / (loss) for the period (717.00) - - - - - - - - ( 717.00) 0.00 Other comprehensive income / (loss) for the period 0.03 - - - - - - - - 0.03 - Translation of financial statement of foreign operations - - - - - - - - (63.99) ( 63.99) - Total comprehensive profit/(loss) for the period ( 7 1 6 -.97) - - - - - - - - - - - - - - ( 6 3 -.99) ( 7 8 0 - .96) 0 -.00 Transactions with owners of the Company - - - - - - - - - - - Employee stock option expense - - 11.42 - - - - - - 11.42 - Total contributions and distributions - - - - 1 1 - .42 - - - - - - - - - - - - 1 1 - .42 - - Financial guarantee received during the period - - - - - - 14.41 - 14.41 - Exercise of share options - - - - - - - - - Sub total - - - - - - - - - - - - - - 1 4 - .41 - - 1 4 -.41 - - Balance as at September 30, 2024 (7,991.52) 7,293.77 71.56 - 11.16 93.94 ( 265.09) 229.33 (351.42) ( 908.27) (9.41) Other equity Attributable to owners of the Company Non Reserves and surplus Items of OCI Total other controlling Retained Securities Share Revaluation Statutory Common Treasury Other Foreign equity interest earnings premium option reserve reserve control shares reserves currency outstanding capital translation account reserve reserve Balance as at April 01, 2024 (7,274.55) 7,293.77 60.14 - 11.16 93.94 ( 265.09) 214.92 (287.43) ( 153.14) (9.41) Profit / (loss) for the year (1,023.46) - - - - - - - - (1,023.46) - Other comprehensive income / (loss) for the year (3.86) - - - - - - - - ( 3.86) - Translation of financial statement of foreign operations - - - - - - - - (49.37) ( 49.37) - Total comprehensive profit/(loss) for the year (1,027.32) - - - - - - - (49.37) ( 1,076.69) - Transactions with owners of the Company Premium on shares issued during the year - 2,500.45 - - - - - - - 2,500.45 - Employee stock option expense - - 8.77 - - - - - - 8.77 - Total contributions and distributions - 2,500.45 8.77 - - - - - - 2,509.22 - Financial guarantee received during the year - - - - - - - 48.41 - 48.41 - Exercise of share options - - - - - - 23.10 - - 23.10 - Sub total - - - - - - 23.10 48.41 - 71.51 - Balance as at March 31, 2025 (8,301.87) 9,794.22 68.91 - 11.16 93.94 ( 241.99) 263.33 (336.80) 1,350.90 (9.41) (This space is intentionally left blank) 401Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure III - Restated Consolidated Statement of Changes in Equity (All amounts are in INR Millions, except share data, unless otherwise stated) C. Other equity and non-controlling interests (refer note 14) (continued) Other equity Attributable to owners of the Company Non Reserves and surplus Items of OCI Total other controlling Retained Securities Share option Revaluation Statutory Common Treasury Other Foreign equity interest earnings premium outstanding reserve reserve control shares reserves currency account capital translation reserve reserve Balance as at April 01, 2025 (8,301.87) 9,794.22 68.91 - 11.16 93.94 ( 241.99) 263.33 (336.80) 1,350.90 (9.41) Profit / (loss) for the period (169.77) - - - - - - - - ( 169.77) - Other comprehensive income / (loss) for the period 0.04 - - - - - - - - 0.04 - Translation of financial statement of foreign operations - - - - - - - - (262.73) ( 262.73) - Total comprehensive profit/(loss) for the period (169.73) - - - - - - - (262.73) ( 432.45) - Transactions with owners of the Company Premium on shares issued during the period - 1,497.90 - - - - - - - 1,497.90 - Employee stock option expense - - 10.25 - - - - - - 10.25 - Total contributions and distributions - 1,497.90 10.25 - - - - - - 1,508.15 - Non controlling interests acquired during the period - - - - - - - - - - Adjustment in financial guarantee during the period - - - - - - - ( 15.45) - ( 15.45) Issue of shares to Aequs Stock Option Plan Trust - - - - - - ( 447.84) - - ( 447.84) - Exercise of Share options - 37.76 ( 13.55) - - - 16.76 - - 40.97 - Sub total - 37.76 ( 13.55) - - - ( 431.08) ( 15.45) - ( 422.32) - Balance as at September 30, 2025 (8,471.60) 11,329.88 65.61 - 11.16 93.94 ( 673.07) 247.88 (599.53) 2,004.27 (9.41) TheabovestatementshouldbereadwithmaterialaccountingpoliciesformingpartoftheRestatedConsolidatedFinancialInformation,NotestoRestatedConsolidatedFinancialInformationandStatementofRestatedAdjustmentstotheAuditedConsolidated Financial Information As per our report of even date attached.

for B S R & Co. LLP for and on behalf of the Board of Directors of Chartered Accountants Aequs Limited (formerly known as Aequs Private Limited) ICAI Firm's Registration No. 101248W/W-100022 CIN: U80302KA2000PLC026760 Sampad Guha Thakurta Rajeev Kaul Aravind S. Melligeri Partner Managing Executive Chairman and Chief Executive Membership No.: 060573 DIN-01468590 DIN-00787735

Place: Chennai Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 Date: November 14, 2025 Dinesh Iyer Ravi Mallikarjun Hugar Chief Financial Officer Company Secretary M. No. - A20823

Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 402- Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure IV - Restated Consolidated Statement of Cash Flows (All amounts are in INR Millions, except share data, unless otherwise stated) Six months ended Six months ended Year ended Y ear ended Y ear ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Cash flow from operating activities Loss before tax from continuing operations (54.17) (659.06) ( 940.79) ( 21.81) (1,026.77) Profit / (Loss) before tax from discontinuing operations (2.93) (0.89) 0.73 ( 20.97) ( 7.69) Loss before tax (57.10) (659.95) ( 940.06) ( 42.78) (1,034.46)

Adjustments for:

Depreciation and amortisation expense 5 71.55 5 29.20 1,034.06 1,076.85 995.16 Equity-settled share-based payment transactions 10.25 11.42 8.77 20.68 24.05 Net loss on disposal of property, plant and equipment / investment property 5.94 - ( 0.42) ( 186.38) 4.76 Interest income from financial asset at amortised cost (49.18) (50.07) ( 89.12) ( 81.91) ( 12.86) Gain on mutual funds - (17.09) ( 23.74) ( 3.58) - Liabilities no longer required written back (8.93) (11.30) ( 21.07) ( 29.97) ( 58.12) Loss allowance on trade receivables 2.26 0.04 4.16 14.63 8.54 Impairment reversal on financial assets - (9.04) - - - Provision for slow moving inventory 92.21 1 67.28 138.42 - 31.52 Finance cost 3 51.36 2 69.11 574.43 638.06 479.26 Finance guarantee income (6.56) (1.95) ( 9.46) ( 6.06) ( 9.61) Unwinding of discount on security deposits (10.06) (10.04) ( 19.72) ( 17.27) ( 19.51) Finance guarantee expense 6.15 9.48 14.58 - 20.03 Unrealised exchange (gain) or loss (182.49) 54.81 ( 20.38) ( 25.79) 94.83 Share of (gain)/loss from associate and joint ventures (33.83) (53.16) ( 85.24) ( 51.52) 8.74 Impairment loss on goodwill - 4 82.65 482.65 - - Impairment loss on loans and receivable from related parties - - - - 7.36 Dividend Income - - - - ( 12.25) Provision for doubtful advances and advance written off 8.17 1.26 8.07 - - Government grant related to property, plant and equipment (5.34) - ( 32.10) - - Gain on derecognition of lease - (19.27) ( 18.59) - ( 18.84) Realised loss on lease payments 37.45 - 29.00 - - 7 31.85 6 93.38 1,034.24 1,304.96 508.60 Working capital adjustments - (Increase) in trade receivables (180.79) (232.79) ( 319.48) ( 309.23) ( 5.92) - (Increase) in inventories (553.66) (803.03) ( 734.26) ( 556.05) ( 870.02) - Decrease/(Increase) in other financial assets (current and non-current) 97.49 (1.41) ( 28.77) ( 23.03) ( 65.38) - (Increase) in other assets (current and non-current) (148.39) (125.87) ( 267.40) ( 211.09) ( 41.34) - (Increase)/Decrease in contract assets (23.54) (9.19) ( 27.91) ( 19.81) 8.37 - Increase /(Decrease) in trade payables 5 01.82 3 27.09 381.02 ( 193.95) 491.29 - Increase in provision for employee benefits 18.67 12.48 47.71 28.79 16.33 - (Decrease) in other liabilities (current and non-current) (8.57) (0.36) ( 58.48) ( 130.44) ( 79.49) - (Decrease)/Increase in other financial liabilities (current and non-current) (75.82) (52.49) 91.80 2.37 21.96 - Increase/(Decrease) in contract liabilities 1 82.90 1 82.67 264.04 ( 42.93) 123.04 Cash generated/(used in) from operations 5 41.96 (9.52) 382.51 ( 150.41) 107.44 Income taxes paid (net of refunds) (62.94) (107.75) ( 121.10) ( 40.67) ( 9.33) Net cash generated/(used in) from operating activities (A) 4 79.02 (117.27) 261.41 ( 191.08) 98.11 Cash flow from investing activities Acquisition of property, plant and equipment (1,999.37) (1,221.84) (2,651.62) (1,818.07) ( 856.10) Proceeds from sale of property, plant and equipment / investment property 6.62 0.73 - 262.20 - Assets classified as held for sale - - 3.36 - ( 45.42) Loans given to related parties - - 15.38 - ( 0.75) Repayment of loans given to related parties - - - - 60.30 Investments in associate and joint ventures - (42.00) ( 42.31) - ( 71.51) Investment in mutual funds - (150.84) ( 172.17) ( 293.57) - Proceeds from sale of mutual funds - 93.77 493.04 - - Investment in bank deposits (117.65) (80.01) (3,204.99) (1,662.99) - Proceeds from maturity of bank deposits 17.54 1 ,052.27 4,701.97 - - Interest received 40.56 50.06 72.44 78.75 12.73 Government grants received 15.57 - 46.70 - - Dividend received - - -- -- 1 2 -.25 ANseste ctas schla usssiefdie idn a isn hveelsdt ifnogr asaclteivities (B) (2,036.73) (297.86) ( 738.20) (3,433.68) ( 888.50) 403- Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure IV - Restated Consolidated Statement of Cash Flows (All amounts are in INR Millions, except share data, unless otherwise stated) Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Cash flow from financing activities Proceeds from issue of equity shares 1 ,281.79 - - 0.03 - Proceeds from issue of compulsorily convertible preference shares - - - 5,219.34 641.00 Proceeds from issue of compulsorily convertible debentures - - - - 839.43 Share issue expenses - - - ( 114.73) ( 68.36) Proceeds from long term borrowing 1 ,142.37 5 88.54 1,107.91 903.53 257.61 Repayment of long term borrowing (239.83) (149.63) ( 345.06) ( 797.49) ( 282.90) Proceeds from related party borrowing - - - 76.08 - Principal payment of lease liabilities (333.03) (271.96) ( 561.63) ( 468.41) ( 362.22) Issue of shares to Aequs Stock Option Plan Trust - - 23.10 - - Exercise of share options 40.97 - - - - Acquisition of non controlling interests - - - ( 100.00) - Proceeds from /(repayment of) short term borrowing (net) 1 03.13 4 68.54 641.82 ( 155.26) ( 31.52) Finance costs paid (335.45) (319.41) ( 612.13) ( 628.19) ( 449.30) Net cash generated from financing activities (C) 1 ,659.95 3 16.07 254.01 3,934.90 543.74 Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Net increase/ (decrease) in cash and cash equivalents ( A + B + C) 1 02.24 (99.06) ( 222.78) 310.14 ( 246.65) Cash and cash equivalents at the beginning of the period / year 6 09.43 7 92.74 792.74 512.87 825.90 Effects of exchange rate changes on cash and cash equivalents (139.74) (36.51) 39.47 ( 30.27) ( 66.38) Cash and cash equivalents at the end of the period / year 5 71.93 6 57.17 609.43 792.74 512.87

Cash and cash equivalents comprise the following: [refer note 9 (iii)] Balances with banks - current accounts 2 78.80 3 32.37 296.70 290.75 361.76 - deposits with original maturity of three months or less 2 92.82 3 24.73 312.70 501.94 151.04 Cash on hand 0.31 0.07 0.03 0.05 0.07 Cash and cash equivalents at the end of the period / year 5 71.93 6 57.17 609.43 792.74 512.87 TheabovestatementshouldbereadwithmaterialaccountingpoliciesformingpartoftheRestatedConsolidatedFinancialInformation,NotestoRestatedConsolidatedFinancial Information and Statement of Restated Adjustments to the Audited Consolidated Financial Information.

As per our report of even date attached. for B S R & Co. LLP for and on behalf of the Board of Directors of Chartered Accountants Aequs Limited (formerly known as Aequs Private Limited) ICAI Firm's Registration No. 101248W/W-100022 CIN: U80302KA2000PLC026760 Sampad Guha Thakurta Rajeev Kaul Aravind S. Melligeri Partner Managing Director Executive Chairman and Chief Executive Officer Membership No.: 060573 DIN-01468590 DIN-00787735

Place: Chennai Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 Date: November 14, 2025 Dinesh Iyer Ravi Mallikarjun Hugar Chief Financial Officer Company Secretary M. No. - A20823

Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 404Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure V - Material Accounting Policies (All amounts are in INR Millions, except share data, unless otherwise stated)

1. Background:

AequsLimited(formerlyknownasAequsPrivateLimited)(‘theParentCompany’)wasincorporatedonMarch27,2000underprovisionsoftheCompaniesAct,1956andislocatedatSpecialEconomic Zone(‘SEZ’)Belagavi,Karnataka,India.IthasitsregisteredofficeatWhitefield,Bengaluru.TheParentCompany,alongwithitssubsidiaries(hereinaftercollectivelyreferredtoas“theGroup”),andits associatesandjointventuresareengagedinthebusinessofcontractmanufacturingcateringtovariousindustries.Theseunitsareregisteredtocarryontheoperationsrelatingtomanufactureofmachined parts used in aerospace and products related to consumer market.

2. Material accounting policies:

ThisnoteprovidesalistofthematerialaccountingpoliciesadoptedinthepreparationoftheseConsolidatedFinancialStatements.Thesepolicieshavebeenconsistentlyappliedtoalltheyearspresented, unless otherwise stated.

a. Basis of preparation and presentation TheRestatedConsolidatedFinancialInformationoftheGroup,itsassociateanditsjointventurescomprisetheRestatedConsolidatedStatementofAssetsand LiabilitiesasatSeptember 30, 2025, September30,2024,March31,2025,March31,2024andMarch31,2023,theRestatedConsolidatedStatementofProfitandLoss(includingOtherComprehensiveIncome),theRestatedConsolidated StatementofChangesinEquityandRestatedConsolidatedStatementofCashFlowsforthesixmonthsperiodendedSeptember30,2025andSeptember30,2024andfortheyearsendedMarch31,2025, March 31, 2024 and March 31, 2023, the Material Accounting Policies and Explanatory Information and Notes (hereinafter referred to as ‘Restated Consolidated Financial Information’).

The Restated ConsolidatedFinancialInformation have been prepared on a going concern basis. The accounting policiesare applied consistentlyto all the periods/years presented in the Restated ConsolidatedFinancialInformation.TheseRestatedConsolidated FinancialInformationhavebeenpreparedbythemanagementoftheCompanyasrequiredundertheSecuritiesandExchangeBoardof India(IssueofCapitalandDisclosureRequirements)Regulations,2018,asamended(“ICDRRegulations”)issuedbytheSecuritiesandExchangeBoardofIndia('SEBI'),inpursuanceoftheSecuritiesand ExchangeBoardofIndiaAct,1992,forthepurposeofinclusionintheRedHerringProspectus(“RHP”)andProspectusinconnectionwithproposedinitialpublicofferingofCompany’sequityshares.

Accordingly, the Restated Consolidated Financial Information may not be suitable for any other purpose and this report should not be used, referred to or distributed for any other purpose.

These Restated Consolidated Financial Information, have been prepared by the Company in terms of the requirements of: a. Section 26 of Part I of Chapter III of the Companies Act, 2013, as amended (""the Act");

b. The Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended; and c. The Guidance Note on Reports in Company Prospectuses (Revised 2019) issued by the Institute of Chartered Accountants of India (ICAI) (the “Guidance Note”).

TheRestatedConsolidatedFinancialInformationhavebeenpreparedtocomplyinallmaterialrespectswiththeIndianAccountingStandards(""IndAS"")asspecifiedunderSection133oftheActreadwit theCompanies(IndianAccountingStandards)Rules,2015(asamendedfromtimetotime),presentationrequirementsofDivisionIIofScheduleIIItotheAct,asapplicabletotheconsolidatedfinancia statements and other relevant provisions of the Act.

The Restated Consolidated Financial Information has been compiled by the management of the Company from: -AuditedspecialpurposeconsolidatedinterimfinancialstatementsoftheGroupanditsjointventuresasatandforthesixmonthsperiodendedSeptember30,2025preparedinaccordancewithIndian AccountingStandard(IndAS)34“InterimFinancialReporting”asspecifiedundersection133ofthe ActandotheraccountingprinciplesgenerallyacceptedinIndiaandpresentationrequirementsof ScheduleIIIoftheAct,exceptforpresentingstatementsofprofitandlossforthecurrentinterimthreemonthsperiodendedseptember30,2025anditscomparativeinterimperiodoftheimmediately preceding financial year as required by Ind AS 34, which have been approved by the Board of Directors at their meeting held on November 14, 2025;

-AuditedspecialpurposeconsolidatedinterimfinancialstatementsoftheGroupanditsjointventuresasatandforthesixmonthsperiodendedSeptember30,2024preparedinaccordancewithIndASas specifiedundersection133oftheActandotheraccountingprinciplesgenerallyacceptedinIndiaandpresentationrequirementsofScheduleIIIoftheActexceptforpresentingcomparativefinancial information as required by Ind AS 34, which have been approved by the Board of Directors at their meeting held on November 14, 2025;

-AuditedConsolidatedfinancialstatementsoftheGroupanditsjointventuresasatandfortheyearsendedMarch31,2025and31March2024preparedinaccordancewiththeIndASasspecifiedunder Section133oftheActreadwithCompanies(IndianAccountingStandards)Rules2015,asamended,andotheraccountingprinciplesgenerallyacceptedinIndia,whichhavebeenapprovedbytheBoardof Directors at their meeting held on August 12, 2025 and October 4, 2024, respectively ; and -AuditedConsolidatedfinancialstatementsoftheGroupanditsassociateandjointventuresasatandfortheyearsendedMarch31,2023preparedinaccordancewithIndASasspecifiedunderSection 133oftheActreadwithCompanies(IndianAccountingStandards)Rules2015,asamended,andotheraccountingprinciplesgenerallyacceptedinIndia,whichhavebeenapprovedbytheBoardof Directors at their meeting held on September 23, 2023.

The Restated Consolidated Financial Information: a)havebeenpreparedafterincorporatingadjustmentsforthechangesinaccountingpolicies,materialerrors,andregrouping/reclassificationsretrospectivelyinthesixmonthsperiodendedSeptember30, 2024andfinancialyearsendedMarch31,2025,March31,2024andMarch31,2023toreflectthesameaccountingtreatmentaspertheaccountingpoliciesandgrouping/classificationsfollowedasatand for the year ended September 30, 2025;

b)doesnotcontainanymodificationrequiringadjustments.Moreover,mattersintheAuditor’sreport,whichdonotrequireanycorrectiveadjustmentsintheRestatedConsolidatedFinancialInformation have been disclosed in Part B of Annexure VI of the Restated Consolidated Financial Information; and c) have been prepared in accordance with the Act, ICDR Regulations and Guidance Note TheseRestatedConsolidatedFinancialInformationarepresentedinIndianRupees(INR),whichisalsotheParentCompany’sfunctionalcurrency.Allamountshavebeenroundedtothetwodecimalo nearest millions, unless otherwise indicated.

The Restated Consolidated Financial Information are approved for issue by the Company’s Board of Directors on November 14, 2025 TheseRestatedConsolidatedFinancialInformationarepreparedinaccordancewithIndianAccountingStandards(IndAS)underthehistoricalcostconventionontheaccrualbasis,exceptforthefollowin

which have been measured at fair value: • Certain financial assets and liabilities are measured at fair value (refer Note 27) • Share-based payments • Defined employee benefit plans; and • Assets held for sale measured at lower of cost and fair value less cost to sell.

405Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure V - Material Accounting Policies (All amounts are in INR Millions, except share data, unless otherwise stated)

2. Material accounting policies (continued) Functional and presentation currency TheRestatedConsolidatedFinancialInformationoftheGroupanditsassociateandjointventuresarepresentedinIndianRupees(INR/₹),whichisthefunctionalcurrencyoftheParentCompanyandthe presentationcurrencyfortheRestatedConsolidatedFinancialInformation.AllamountsdisclosedintheRestatedConsolidatedFinancialInformationhavebeenroundedtothetwodecimalofnearest millions(Mn)aspertherequirementofScheduleIIIofCompaniesAct,2013,unlessotherwisestated.Amountsmentionedas"0.00"inthefinancialstatementsdenoteamountsroundedoffbeinglessthan ₹ 0.005 Mn.

Accounting policy on EBITDA AspermittedbytheGuidanceNoteonDivisionII-IndASScheduleIIItotheCompaniesAct2013,theGrouphaselectedtopresentearningsbeforeinterest,tax,depreciationandamortization(EBITDA) asaseparatelineitemonthefaceoftheRestatedConsolidatedStatementofprofitandloss.TheGroupmeasuresEBITDAonthebasisofprofit/(loss)fromcontinuingoperations.Initsmeasurement,the Groupdoesnotincludedepreciationandamoritizationexpense,financecosts,shareofnetprofit/(loss)ofassociateandjointventuresaccountedforusingtheequitymethodnetoftax,exceptionalitems gain/ (loss) and income tax expenses.

Recent pronouncements A) Effective amendments - MinistryofCorporateAffairs("MCA")notifiesnewstandardsoramendmentstotheexistingstandardsunderCompanies(IndianAccountingStandards)Rulesasissuedfromtimetotime.DuringtheperiodendedSeptember30, 2025,MCAhasnotifiedIndAS–117InsuranceContractsandamendmentstoIndAS116–Leases,relatingtosaleandleasebacktransactions,applicabletotheGroupanditsjointventuresw.e.f.April1,2024.OnMay7, 2025,MCAnotifiedtheamendmentstoIndAS21-EffectsofChangesinForeignExchangeRateswhichaimtoprovideclearerguidanceonassessingunderlyexchangeabilityandestimatingexchangerateswhencurrenciesare notreadilyexchangeable.OnAugust13,2025,MCAnotifiedtheamendmentstoIndAS1-PresentationofFinancialStatements,IndAS7-StatementofCashFlows,IndAS8-EventsaftertheReportingPeriod,andIndAS12 -Incometax,IndAS28-InvestmentsinAssociatesandJointVentureswhichareeffectiveforannualperiodsbeginningonorafterApril1,2025.TheGroupanditsjointventureshasreviewedthenewpronouncementsand based on its evaluation has determined that it does not have any significant impact in its financial statements.

B) Amendments notified but not effective (effective 01 April 2026) - Ind AS 1, Presentation of Financial statements – This amendment removes the carve-outs in Ind AS 1 from IAS 1 when there is a breach of a material covenant that transforms the liability from non-current to current.

The Group and its joint ventures will evaluate the requirements and apply these amendments from the effective date. However, presently the Group and its joint ventures does not see any material impact on the financial statements.

b. Principles of consolidation and equity accounting TheRestatedConsolidatedFinancialInformationincorporatethefinancialstatementsoftheParentCompanyandentitiescontrolledbytheParentCompanyi.e.,itssubsidiaries.ItalsoincludestheGroup's share of profits/(loss), net assets and retained post acquisition reserves of joint ventures and associates that are consolidated using the equity method of consolidation.

Control is achieved when the Company is exposed to or has rights to the variable returns of the entity and the ability to affect those returns through its power to direct the relevant activities of the entity.

Theresultsofsubsidiaries,jointventuresandassociatesacquiredordisposedoffduringtheyearareincludedintherestatedconsolidatedstatementofprofitandlossfromtheeffectivedateofacquisitionor up to the effective date of disposal, as appropriate.

Wherever necessary, adjustments are made to the financial statements of subsidiaries, joint ventures and associates to bring their accounting policies in line with those used by other entities of the Group.

(i) Subsidiaries:

SubsidiariesareentitiescontrolledbytheGroup.TheGroup‘controls’anentitywhenitisexposedto,orhasrightsto,variablereturnsfromitsinvolvementwiththeentityandhastheabilitytoaffectthose returnsthroughitspowerovertheentity.Thefinancialstatementsofsubsidiariesareincludedintherestatedconsolidatedfinancialstatementsfromthedateonwhichcontrolcommencesuntilthedateon which control ceases.

Itemsofassets,liabilities,equity,income,expensesandcashflowsoftheparentwiththoseofitssubsidiariesarecombinedliketolikebasis.Forthispurpose,incomeandexpensesofthesubsidiaryare based on the amounts of the assets and liabilities recognized in the consolidated financial statements at the acquisition date.

(ii) Non-controlling interests (NCI) Non-controllinginterestsinthenetassetsofconsolidatedsubsidiariesareidentifiedseparatelyfromtheGroup’sequity.Theinterestofnon-controllingshareholdersmaybeinitiallymeasuredeitheratfair valueoratthenon-controllinginterests’proportionateshareofthefairvalueoftheacquiree’sidentifiablenetassets.Thechoiceofmeasurementbasisismadeonanacquisition-by-acquisitionbasis.

Subsequenttoacquisition,thecarryingvalueofnon-controllinginterestsistheamountofthoseinterestsatinitialrecognitionplusthenon-controllinginterests’shareofsubsequentchangesinequity.Total comprehensive income is attributed to non-controlling interests even if it results in the non-controlling interests having a deficit balance.

(iii) Transactions eliminated on consolidation IntraGroupbalancesandtransactions,andanyunrealisedincomeandexpensesarisingfromintra-Grouptransactions,areeliminated.Unrealisedgainsarisingfromtransactionswithequityaccounted investeesareeliminatedagainsttheinvestmenttotheextentoftheGroup'sinterestintheinvestee.Unrealisedlossesareeliminatedinthesamewayasunrealisedgains,butonlytotheextentthatthereisno evidence of impairment.

c. Business combination Acommoncontrolbusinesscombination,involvingentitiesorbusinessesinwhichallthecombiningentitiesorbusinessesareultimatelycontrolledbythesamepartyorpartiesbothbeforeandafterthe businesscombinationandwherethecontrolisnottransitory,isaccountedforusingthepoolingofinterestmethodinaccordancewithIndAS103'BusinessCombinations'.Otherbusinesscombinations, involvingentitiesorbusinessesareaccountedforusingacquisitionmethod. Considerationtransferredinsuchbusiness combinationsismeasuredatfairvalue,whichiscalculatedasthesum ofthe acquisitiondatefairvaluesoftheassetstransferredbytheGroup,liabilitiesincurredbytheGrouptotheformerownersoftheacquireeandtheequityinterestsissuedbytheGroupinexchangeofcontrolof theacquiree.Goodwillisrecognisedandismeasuredastheexcessofthesumofthe(i)considerationtransferred,(ii)theamountofanynon-controllinginterestsintheacquiree,and(iii)thefairvalueofthe acquirer'spreviouslyheldequityinterestintheacquiree,overthenetoftheconsiderationdateamountsoftheidentifiableassetsacquiredandtheliabilitiesassumed.Ifthoseamountsarelessthanthefair valueofthenetidentifiableassetsofthebusinessacquired,thedifferenceisrecognisedinothercomprehensiveincomeandaccumulatedinequityascapitalreserveprovidedthereisclearevidenceofthe underlying reasons for classifying the business combination as a bargain purchase. In other cases, the bargain purchase gain is recognised directly in equity as capital reserve.

d. Goodwill Goodwillisinitiallyrecognisedasanassetatcostandissubsequentlymeasuredatcostlessanyaccumulatedimpairmentlosses.Forthepurposeofimpairmenttesting,goodwillisallocatedtoeachofthe Group’scash-generatingunitsorGroupsofcashgeneratingunitsthatareexpectedtobenefitfromthesynergiesofthecombination.Cash-generatingunitstowhichgoodwillhasbeenallocatedaretestedfor impairmentannually,ormorefrequentlywhenthereisanindicationthattheunit’svaluemaybeimpaired.Iftherecoverableamountofthecash-generatingunitislessthanthecarryingvalueoftheunit,the impairmentlossisallocatedfirsttoreducethecarryingvalueofanygoodwillallocatedtotheunitandthentotheotherassetsoftheunitinproportiontothecarryingvalueofeachassetintheunit. An impairmentlossrecognisedforgoodwillisnotreversedinasubsequentperiod.Ondisposalofasubsidiary,theattributableamountofgoodwillisincludedinthedeterminationofprofitorlossondisposal.

Goodwill is not amortised but it is tested for impairment annually, or more frequently if events or changes in circumstances indicate that it might be impaired.

406Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure V - Material Accounting Policies (All amounts are in INR Millions, except share data, unless otherwise stated)

2. Material accounting policies (continued) e. Investment in associates AssociatesarethoseenterprisesoverwhichtheGrouphassignificantinfluencebutdoesnothavecontrolorjointcontrol.Investmentsinassociatesareaccountedforusingtheequitymethodandareinitially recognisedatcostfromthedatesignificantinfluencecommencesuntilthedatethatsignificantinfluenceceases.Subsequentchangesinthecarryingvaluereflectthepost-acquisitionchangesintheGroup’s shareofnetassetsoftheassociateandimpairmentcharges,ifany. WhentheGroup’sshareoflossesexceedsthecarryingvalueoftheassociate,thecarryingvalueisreducedtonilandrecognitionof furtherlossesisdiscontinued,excepttotheextentthattheGrouphasincurredobligationsinrespectoftheassociate. UnrealisedgainsontransactionsbetweentheGroupanditsassociatesareeliminatedto theextentoftheGroup’sinterestintheassociates,unrealisedlossesarealsoeliminatedunlessthetransactionprovidesevidenceofanimpairmentoftheassettransferredandwherematerial,theresultsof associates are modified to conform to the Group’s accounting policies.

f. Investment in joint ventures AjointarrangementisacontractualarrangementwherebytheGroupandotherpartiesundertakeaneconomicactivitywherethestrategicfinancialandoperatingpolicydecisionsrelatingtotheactivitiesof the joint arrangement require the unanimous consent of the parties sharing control.

Jointarrangementsthatinvolvetheestablishmentofaseparateentityinwhicheachcoventurerhasaninterestarereferredtoasjointventures.TheGroupreportsitsinterestsinjointventuresusingthe equitymethodofaccountingwherebyaninterestinjointventureisinitiallyrecordedatcostandadjustedthereafterforpost-acquisitionchangesintheGroup’sshareofnetassetsofthejointventure.The consolidated statement of profit and loss reflects the Group’s share of the results of operations of the joint venture.

WhentheGroup’sshareoflossesexceedsthecarryingvalueofthejointventure,thecarryingvalueisreducedtonilandrecognitionoffurtherlossesisdiscontinued,excepttotheextentthattheGrouphas incurredobligationsinrespectofthejointventure.UnrealizedgainsontransactionsbetweentheGroupanditsjointventuresareeliminatedtotheextentoftheGroup’sinterestinthejointventure, unrealizedlossesarealsoeliminatedunlessthetransactionprovidesevidenceofanimpairmentoftheassettransferredandwherematerial,theresultsofjointventuresaremodifiedtoconfirmtothe Group’s accounting policies.

g. Segment reporting OperatingsegmentreflecttheGroup'smanagement structureandthewaythefinancialinformationisregularlyreviewedbytheExecutiveChairman andChiefExecutiveOfficer(theGroup'sChief OperatingDecisionMaker(CODM)).TheCODMconsidersthebusinessfrombothbusinessandproductperspectivebasedonthedominantsource,natureofrisksandreturnsandtheinternalorganisation and management structure.

Segment revenue, segment expenses, segment assets and segment liabilities have been identified to the segment on the basis of their relationship to the operating activities of the segment.

Revenue,expenses,assetsandliabilitieswhichrelatetotheGroupasawholeandarenotallocabletosegmentsonreasonablebasishavebeenincludedunderunallocatedrevenue/expenses/assets/ liabilities.

TheGroup'sCODMisidentifiedtobetheExecutiveChairmanandChiefExecutiveOfficeroftheGroup,whoplanstheallocationofresourcesandassesstheperformanceofthesegments.TheGrouphas two reportable segments 'Aerospace' and 'Consumer' to be reported in its financial statements.

h. Foreign currency transactions InpreparingtheRestatedConsolidatedFinancialInformation,transactionsincurrenciesotherthantheentity’sfunctionalcurrencyarerecordedattheratesofexchangeprevailingonthedateofthe transaction.Attheendofeachreportingperiod,monetaryitemsdenominatedinforeigncurrenciesarere-translatedattheratesprevailingattheendofthereportingperiod.Non-monetaryitemscarriedat fairvaluethataredenominatedinforeigncurrenciesarere-translatedattheratesprevailingonthedatewhenthefairvaluewasdetermined.Non-monetaryitemsthataremeasuredintermsofhistoricalcost in a foreign currency are not translated.

ForthepurposeofpresentingtheRestatedConsolidatedFinancialInformation,theassetsandliabilitiesoftheParentCompany’sforeignsubsidiaries,associatesandjointventuresareexpressedinusing exchangeratesprevailingattheendofthereportingperiod.Incomeandexpenseitemsaretranslatedattheaverageexchangeratesfortheperiod.Exchangedifferencesarising,ifany,arerecognisedinother comprehensiveincomeandaccumulatedinaseparatecomponentofequity.Onthedisposalofaforeignoperations,alloftheaccumulatedexchangedifferencesinrespectofthatoperationsattributableto the Company are reclassified to the consolidated statement of profit and loss.

Goodwill and fair value adjustments arising on the acquisition of a foreign operation are treated as assets and liabilities of the foreign operations and translated at the closing rate.

407Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure V - Material Accounting Policies (All amounts are in INR Millions, except share data, unless otherwise stated)

2. Material accounting policies (continued) i. Revenue recognition The Group earns its revenue from sale of manufactured goods and rendering of services. The Group has determined that it is a principal in all its arrangements with its customers.

TheGrouprecognisesrevenuewhencontrolofgoodshastransferredtocustomersandtherearenounfulfilledobligationsthatcouldaffectthecustomer'sacceptanceoftheproducts.Controlofgoodsis consideredtobetransferredatapoint-in-timewhengoodshavebeendespatchedordelivered,asperthetermsagreedwiththecustomerasthatiswhenthelegaltitle,physicalpossessionandrisksand rewards of goods transfers to the customers.

Revenue from services is recognised in the accounting period in which services are rendered.

TheGroupdoesnothaveanycontractswheretheperiodbetweenthetransferofgoodsorservicestothecustomerandpaymentbythecustomerexceedsoneyear.Accordingly,theGroupdoesnotadjust any of the transaction prices for time value of money.

Revenuetowardssatisfactionofaperformanceobligationismeasuredattheamountoftransactionprice allocatedtothatperformanceobligation.Asapracticalexpedient,theGrouphasoptednotto disclose the information in respect of performance obligations that are part of contracts that has an original expected duration of one year or less.

AcontractassetisrecognisedwhentheGroupgetstherighttoconsiderationinexchangeforgoodsorservicesthatithastransferredtothecustomersandtherightisconditionaluponactsotherthan passage of time.

When the payment exceeds the value of goods supplied or services rendered, a contract liability (advance from customers) is recognised. j. Government grants GovernmentgrantsarerecognisedwhenthereisreasonableassurancethattheGroupwillcomplywiththerelevantconditionsandthegrantwillbereceived.Governmentgrantsarerecognisedinthe statementofprofitandloss,eitheronasystematicbasiswhentheGrouprecognizes,asexpenses,therelatedcoststhatthegrantsareintendedtocompensateor,immediatelyifthecostshavealreadybeen incurred. Government grants related to assets are deferred and amortised over the useful life of the asset.

k. Income tax Theincometaxexpenseorcreditfortheyearisthetaxpayableonthecurrentyear'staxableincomebasedontheapplicableincometaxrateapplicableadjustedbychangesindeferredtaxassetsand liabilities attributable to temporary differences and to unused tax losses.

Thecurrentincometaxchargeiscalculatedonthebasisofthetaxlawsenactedorsubstantivelyenactedattheendofthereportingyearinthecountrieswheretheparentcompanyanditssubsidiariesand associatesoperateandgeneratetaxableincome.Managementperiodicallyevaluatespositionstakenintaxreturnswithrespecttosituationsinwhichapplicabletaxregulationissubjecttointerpretationand considerswhetheritisprobablethatataxationauthoritywillacceptanuncertaintaxtreatment.TheGroupmeasuresitstaxbalanceseitherbasedonthemostlikelyamountortheexpectedvalue,depending on which method provides a better prediction of the resolution of the uncertainty.

Deferredincometaxisprovidedontemporarydifferencesarisingbetweenthetaxbasesofassetsandliabilitiesandtheircarryingamountsinthefinancialstatements.Deferredincometaxisalsonot accountedforifitarisesfrominitialrecognitionofanassetorliabilityinatransactionotherthanabusinesscombinationthatatthetimeofthetransactionaffectsneitheraccountingprofitnortaxableprofit

(taxloss).Deferredincometaxisdeterminedusingtaxrates(andlaws)thathavebeenenactedorsubstantiallyenactedbytheendofthereportingperiodandareexpectedtoapplywhentherelateddeferred income tax asset is realized or the deferred income tax liability is settled.

Deferredtaxassetsarerecognisedforalldeductibletemporarydifferencesandunusedtaxlossesonlyifitisprobablethatfuturetaxableamountswillbeavailabletoutilisethosetemporarydifferencesand losses.Deferredtaxassetsandliabilitiesareoffsetwhenthereisalegallyenforceablerighttooffsetcurrenttaxassetsandliabilitiesandwhenthedeferredtaxbalancesrelatetothesametaxationauthority.

Currenttaxassetsandtaxliabilitiesareoffsetwheretheentityhasalegallyenforceablerighttooffsetandintendseithertosettleonanetbasis,ortorealisetheassetandsettletheliabilitysimultaneously.

Deferred tax assets are reviewed at each reporting date.

Currentanddeferredtaxisrecognisedinprofitorloss,excepttotheextentthatitrelatestoitemsrecognisedinothercomprehensiveincomeordirectlyinequity.Inthiscase,thetaxisalsorecognisedin other comprehensive income or directly in equity, respectively.

(This space is intentionally left blank) 408Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure V - Material Accounting Policies (All amounts are in INR Millions, except share data, unless otherwise stated)

2. Material accounting policies (continued) l. Leases Atinceptionofacontract,theGroupassesseswhetheracontractis,orcontains,alease.Acontractis,orcontains,aleaseifthecontractconveystherighttocontroltheuseofanidentifiedassetforaperiod of time in exchange for consideration.

As a lessee LeasesarerecognisedasarightofuseassetandacorrespondingliabilityatthedateatwhichtheleasedassetisavailableforusebytheGroup.Contractsmaycontainbothleaseandnon-leasecomponents.

The Group allocates the consideration in the contract to the lease and non-lease components based on their relative stand-alone prices.

Assets and liabilities arising from a lease are initially measured on a present value basis. Lease liabilities include the net present value of the following lease payments: - Fixed payments (including in-substance fixed payments), less any lease incentives receivable.

- Variable lease payment that are based on an index or a rate, initially measured using the index or rate as at the commencement date. - Amounts expected to be payable by the Group under residual value guarantees.

- The exercise price of a purchase option if the Group is reasonably certain to exercise that option. - Payments of penalties for terminating the lease, if the lease term reflects the Group exercising that option.

Theleaseliabilityismeasuredatamortisedcostusingtheeffectiveinterestmethod.Itisremeasuredwhenthereisachangeinfutureleasepaymentsarisingfromachangeinanindexorrate,ifthereisa changeintheGroup’sestimateoftheamountexpectedtobepayableunderaresidualvalueguarantee,iftheGroupchangesitsassessmentofwhetheritwillexerciseapurchase,extensionortermination option or if there is a revised in-substance fixed lease payment.

Whentheleaseliabilityisremeasuredinthisway,acorrespondingadjustmentismadetothecarryingamountoftheright-of-useasset,orisrecordedinprofitorlossifthecarryingamountoftheright-of- use asset has been reduced to zero.

Leasepaymentstobemadeunderreasonablycertainextensionsoptionsarealsoincludedinthemeasurementoftheliability.Theleasepaymentsarediscountedusingtheinterestrateimplicitinthelease.If theratecannotbereadilydetermined,asinthecaseofleaseofbuildings,theGroup'sincrementalborrowingrateisused,beingtheratethattheGroupwouldhavetopaytoborrowthefundsnecessaryto obtain the asset of similar value to the right of use asset in a similar economic environment with similar terms, security and conditions.

Leasepaymentsareallocatedbetweenprincipalandfinancecost.Thefinancecostischargedtoprofitorlossovertheleaseperiodsoastoproduceaconstantperiodicrateofinterestontheremaining balance of the liability for each period.

Right of use assets are measured at cost comprising of the following: - The amount of the initial measurement of lease liability - Any lease payments made on or before the commencement date less any lease incentives received - Any initial direct cost - Restoration cost Rightofuseassetsaregenerallydepreciatedovertheshorteroftheasset'susefullifeandtheleasetermonastraightlinebasis.WheretheGroupisreasonablycertaintoexercisethepurchaseoption,the right of use asset is depreciated over the underlying asset's useful life.

Paymentassociatedwithshort-termleaseofequipmentandallleasesoflow-valueassetsarerecognisedonastraightlinebasisasanexpenseinprofitorloss.Shorttermleasesareleaseswithaleasetermof 12 months or less. m. Impairment of assets Ateachbalancesheetdate,theGroupreviewsthecarryingvalueofitsproperty,plantandequipment,intangibleassetsandrightofuseassetstodeterminewhetherthereisanyindicationthatthecarrying valueofthoseassetsmaynotberecoverablethroughcontinuinguse.Ifanysuchindicationexists,therecoverableamountoftheassetisreviewedinordertodeterminetheextentofimpairmentloss,ifany.

Where the asset does not generate cash flows that are independent from other assets, the Group estimates the recoverable amount of the cash generating unit to which the asset belongs.

Recoverableamountisthehigheroffairvaluelesscoststosellandvalueinuse.Inassessingvalueinuse,theestimatedfuturecashflowsarediscountedtotheirpresentvalueusingapre-taxdiscountrate thatreflectscurrentmarketassessmentsofthetimevalueofmoneyandtherisksspecifictotheassetforwhichtheestimatesoffuturecashflowshavenotbeenadjusted.Animpairmentlossisrecognisedin the consolidated statement of profit and loss as and when the carrying value of an asset exceeds its recoverable amount.

Whereanimpairmentlosssubsequentlyreverses,thecarryingvalueoftheasset(orcashgeneratingunit)isincreasedtotherevisedestimateofitsrecoverableamount,sothattheincreasedcarryingvalue doesnotexceedthecarryingvaluethatwouldhavebeendeterminedhadnoimpairmentlossbeenrecognisedfortheasset(orcashgeneratingunit)inprioryears.Areversalofanimpairmentlossis recognised in the consolidated statement of profit and loss immediately.

(This space is intentionally left blank) 409Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure V - Material Accounting Policies (All amounts are in INR Millions, except share data, unless otherwise stated)

2. Material accounting policies (continued) n. Cash and cash equivalents Forthepurposeofpresentationinthestatementofcashflows,cashandcashequivalentsincludescashonhand,depositsheldatcallwithfinancialinstitutions,othershort-term,highlyliquidinvestments with original maturities of three months or less that are readily convertible to known amounts of cash and which are subject to an insignificant risk of changes in value, and bank overdrafts.

o. Trade receivables TradereceivablesareamountsduefromcustomersforgoodssoldorservicesperformedintheordinarycourseofbusinessandreflectsGroup’sunconditionalrighttoconsideration(thatis,paymentisdue onlyonthepassageoftime).Tradereceivablesarerecognisedinitiallyatthetransactionpriceastheydonotcontainsignificantfinancingcomponents.TheGroupholdsthetradereceivableswiththe objective of collecting the contractual cash flows and therefore measures them subsequently at amortised cost using the effective interest method, less loss allowance.

p. Inventories Inventoriesincluderawmaterials(includingstores,sparesandpackingmaterial),workinprogressandfinishedgoods.Inventoriesarestatedatthelowerofcostandnetrealizablevalue.Costofraw materials comprise of cost of purchases, freight and other expenses incurred in bringing the raw materials to the manufacturing location, excluding rebates and discounts.

Costofworkinprogressandfinishedgoodscomprisesdirectmaterials,directlabourandanappropriateportionofvariableandfixedoverheadexpenditure,thelatterbeingallocatedonthebasisofnormal operating capacity.

Costsareassignedtoindividualitemsonweightedaveragecostbasiswhichiscalculatedonthebasisoftotalcostofrawmaterialsdividedbythequantitiespurchased.Netrealizablevalueistheestimated selling price in the ordinary course of business less the estimated costs of completion and the estimated costs necessary to make the sale.

q. Investments and other financial assets Classification

The Group classifies its financial assets in the following measurement categories: • those to be measured subsequently at fair value (either through other comprehensive income, or through profit or loss), and • those measured at amortised cost.

The classification depends on the entity's business model for managing the financial assets and the contractual terms of the cash flows.

Forassetsmeasuredatfairvalue,gainsandlosseswilleitherberecordedinprofitorlossorothercomprehensiveincome.Forinvestmentsinequityinstruments(notheldfortradingpurpose),thiswill depend on whether the Group has made an irrevocable election at the time of initial recognition to account for the equity investment at fair value through other comprehensive income.

Recognition Regular way purchases and sales of financial assets are recognised on trade-date, the date on which the Group commits to purchase or sale the financial assets.

Measurement Atinitialrecognition,theGroupmeasuresafinancialasset(otherthantradereceivables)atitsfairvalueplus,inthecaseofafinancialassetnotatfairvaluethroughprofitorloss,transactioncoststhatare directly attributable to the acquisition of the financial asset. Transaction costs of financial assets carried at fair value through profit or loss are expensed in profit or loss.

(a)Amortizedcost:Assetsthatareheldforcollectionofcontractualcashflowswherethosecashflowsrepresentsolelypaymentsofprincipalandinterestaremeasuredatamortizedcost.Interestincome from these financial assets is included in finance income using the effective interest rate method (refer note 28 for asset details).

(b)Fairvaluethroughothercomprehensiveincome(FVOCI):Assetsthatareheldforcollectionofcontractualcashflowsandforsellingthefinancialassets,wheretheassets'cashflowsrepresentsolely paymentsofprincipalandinterest,aremeasuredatFVOCI.MovementsinthecarryingamountaretakenthroughOCI,exceptfortherecognitionofimpairmentgainsorlosses,interestrevenueandforeign exchangegainsandlosseswhicharerecognisedinprofitandloss.Whenthefinancialassetisderecognized,thecumulativegainorlosspreviouslyrecognisedinOCIisreclassifiedfromequitytoprofitor lossandrecognisedinothergains/(losses).Interestincomefromthesefinancialassetsisincludedinotherincomeusingtheeffectiveinterestratemethod.Foreignexchangegainsandlossesarepresentedin other expenses and impairment expenses in other expenses.

Impairment of financial asset TheGroupassessesonaforwardlookingbasistheexpectedcreditlossesassociatedwithitsassetscarriedatamortisedcost.Theimpairmentmethodologyapplieddependsonwhethertherehasbeena significantincreaseincreditrisk.Note28detailshowtheGroupdetermineswhethertherehasbeenasignificantincreaseincreditrisk.Fortradereceivablesonly,theGroupappliesthesimplifiedapproach required by Ind AS 109 Financial Instruments, which requires expected lifetime losses to be recognised from initial recognition of the receivables.

(This space is intentionally left blank) 410Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure V - Material Accounting Policies (All amounts are in INR Millions, except share data, unless otherwise stated)

2. Material accounting policies (continued) q. Investments and other financial assets (continued) Derecognition of financial assets A financial asset is derecognized only when • The Group has transferred the rights to receive cash flows from the financial asset or • retains the contractual rights to receive the cash flows of the financial asset, but assumes a contractual obligation to pay the cash flows to one or more recipients.

Where theentityhas transferred an asset,theGroup evaluateswhether ithas transferred substantiallyallrisks and rewards ofownership ofthefinancialasset.Insuch cases,thefinancialassetis derecognized. Where the entity has not transferred substantially all risks and rewards of ownership of the financial asset, the financial asset is not derecognized.

Wheretheentityhasneithertransferredafinancialassetnorretainssubstantiallyallrisksandrewardsofownershipofthefinancialasset,thefinancialassetisderecognizediftheGrouphasnotretained control of the financial asset. Where the Group retains control of the financial asset, the asset is continued to be recognised to the extent of continuing involvement in the financial asset.

Income recognition Interestincomefromfinancialassetsatfairvaluethroughprofitandlossisdisclosedasinterestincomewithinfinanceincome. Interestincomefromfinancialassetsatamortizedcostiscalculatedusingthe effective interest method and is recognised in the statement of profit and loss using the effective interest rate method.

Dividend Income Dividend income is recognised in profit or loss on the date on which the Group’s right to receive payment is established. r. Property, plant and equipment Allitemsofproperty,plantandequipmentarestatedathistoricalcostordeemedcostappliedontransitiontoIndASlessdepreciation.Historicalcostincludesexpenditurethatisdirectlyattributabletothe acquisitionoftheitems,netofrefundabletaxes.Subsequentcostsareincludedintheasset'scarryingamountorrecognisedasaseparateasset,asappropriate,onlywhenitisprobablethatfutureeconomic benefits associated with the item will flow to the Group and the cost of the item can be measured reliably. When significant spare parts of an item of property, plant and equipment have different useful lives, theyareaccountedforasseparateitems(majorcomponents)ofproperty,plantandequipment.Thecarryingamountofanycomponentaccountedforasaseparateassetisderecognisedwhenreplaced.All other repairs and maintenance are charged to profit or loss during the reporting period in which they are incurred.

Depreciationcommenceswhentheassetsarereadyfortheirintendeduse.Anasset'scarryingamountiswrittendownimmediatelytoitsrecoverableamountiftheasset'scarryingamountisgreaterthanits estimated recoverable amount. Gains and losses on disposals are determined by comparing proceeds with carrying amount. These are included in statement of profit and loss within other income/(expenses).

Depreciation methods, estimated useful lives and residual value Depreciationiscalculatedusingthestraight-linemethodtoallocatetheircost,netoftheirresidualvalues,overtheirestimatedusefullivesor,incaseofcertainleasedmachineries,theshorterleasetermas

follows:

The estimated useful lives of assets are as follows:

Asset Useful life (in years) Leasehold improvements 10 or lease period, w hichever is lower Plant and machinery 1.5 to 10 Computers 3 to 6 Furniture and fittings 1.5 to 5 Vehicles 10 Office and other equipment 1.5 to 5 TheusefulliveshavebeendeterminedbasedontechnicalevaluationdonebythemanagementwhicharehigherthanthosespecifiedbyScheduleIItotheCompaniesAct,2013,inordertoreflecttheactual usage of the assets. The residual values are not more than 5% of the original cost of the asset.

The assets' residual values and useful lives are reviewed, and adjusted if appropriate, at the end of each reporting period. Assets in the course of development or construction are not depreciated. s. Investment property Propertythatisheldforlong-termrentalyieldsorforcapitalappreciationorboth,andthatisnotoccupiedbytheGroup,isclassifiedasinvestmentproperty.Investmentpropertyismeasuredinitiallyatits cost,includingrelatedtransactioncostsandwhereapplicableborrowingcosts.Subsequentexpenditureiscapitalisedtotheasset’scarryingamountonlywhenitisprobablethatfutureeconomicbenefits associatedwiththeexpenditurewillflowtotheGroupandthecostoftheitemcanbemeasuredreliably.Allotherrepairsandmaintenancecostsareexpensedwhenincurred.Whenpartofaninvestment propertyisreplaced,thecarryingamountofthereplacedpartisderecognised.Investmentpropertiesaredepreciatedusingthestraight-linemethodovertheirestimatedusefullives.Investmentproperty

(building) is depreciated over the estimated remaining useful life of 7 years. The useful life has been determined based on technical evaluation performed by the management’s expert. t. Intangible assets IntangibleassetsincludeComputersoftwareandTechnicalknowhow.Costsassociatedwithmaintainingsoftwareprogramsarerecognisedasanexpenseasincurred.Technicalknowhowcomprisesof capitalized product developed costs, being an internally generated intangible asset.

The Group amortizes intangible assets with finite useful life using the straight-line method over the following estimated useful lives:

Asset Useful life (in years) Computer software 2 - 10 years Technical knowhow 5 years u. Trade and other payables TheseamountsrepresentliabilitiesforgoodsandservicesprovidedtotheGrouppriortotheendoffinancialyearwhichareunpaid.Theamountsareunsecured.Tradeandotherpayablesarepresentedas currentliabilitiesunlesspaymentisnotduewithin12monthsafterthereportingperiod.Theyarerecognisedinitiallyattheirfairvalueandsubsequentlymeasuredatamortizedcostusingtheeffective interest method.

(This space is intentionally left blank) 411Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure V - Material Accounting Policies (All amounts are in INR Millions, except share data, unless otherwise stated)

2. Material accounting policies (continued) v. Borrowings Borrowingsareinitiallyrecognisedatfairvalue,netoftransactioncostsincurred.Borrowingsaresubsequentlymeasuredatamortisedcost.Anydifferencebetweentheproceeds(netoftransactioncosts) andtheredemptionamountisrecognisedinprofitorlossovertheperiodoftheborrowingsusingtheeffectiveinterestmethod.Feespaidontheestablishmentofloanfacilitiesarerecognisedastransaction costsofthe loantotheextentthatitisprobablethatsomeorallofthefacilitywillbedrawndown.Inthiscase,thefeeisdeferreduntilthedrawdownoccurs.Totheextentthereisnoevidencethatitis probable that some or all of the facility will be drawn down, the fee is capitalised as a prepayment for liquidity services and amortised over the period of the facility to which it relates.

BorrowingsareclassifiedascurrentliabilitiesunlesstheGrouphasanunconditionalrighttodefersettlementoftheliabilityforatleast12monthsafterthereportingperiod.Wherethereisabreachofa materialprovisionofalong-termloanarrangementonorbeforetheendofthereportingperiodwiththeeffectthattheliabilitybecomespayableondemandonthereportingdate,theentitydoesnotclassify the liability as current, if the lender agreed, after the reporting period and before the approval of the financial statements for issue, not to demand payment as a consequence of the breach.

w. Borrowing costs Generalandspecificborrowingcoststhataredirectlyattributabletotheacquisition,constructionorproductionofaqualifyingassetarecapitalisedduringtheperiodoftimethatisrequiredtocompleteand preparetheassetforitsintendeduseorsale.Qualifyingassetsareassetsthatnecessarilytakeasubstantialperiodoftimetogetreadyfortheirintendeduseorsale.Investmentincomeearnedonthe temporaryinvestmentofspecificborrowingspendingtheirexpenditureonqualifyingassetsisdeductedfromtheborrowingcostseligibleforcapitalization.Otherborrowingcostsareexpensedintheperiod in which they are incurred.

x. Employee benefits Short-term obligations Liabilitiesforwagesandsalaries,includingnon-monetarybenefitsthatareexpectedtobesettledwhollywithin12monthsaftertheendoftheperiodinwhichtheemployeesrendertherelatedserviceare recognisedinrespectofemployees'servicesuptotheendofthereportingperiodandaremeasuredattheamountsexpectedtobepaidwhentheliabilitiesaresettled.Theliabilitiesarepresentedascurrent employee benefit obligations in the Balance Sheet.

Other long-term employee benefit obligations Leaveobligationsarepresentedascurrentliabilitiesinthebalancesheetsincetheentitydoesnothaveanunconditionalrighttodefersettlementforatleasttwelvemonthsafterthereportingperiod, regardless of when the actual settlement is expected to occur.

Post-employment obligations The Group operates the following post-employment schemes:

(a) defined benefit plans such as gratuity, pension obligations; and

(b) defined contribution plans such as provident fund and ESI.

(a) Defined benefit plans:

Adefinedbenefitplanisapost-employmentbenefitplanotherthanadefinedcontributionplan.TheGroup’snetobligationinrespectofdefinedbenefitplansiscalculatedseparatelyforeachplanby estimating the amount of future benefit that employees have earned in the current and prior periods, discounting that amount and deducting the fair value of any plan assets.

Gratuity obligations (India):

Theliabilityorassetrecognisedinthebalancesheetinrespectofgratuityplansisthepresentvalueofthedefinedbenefitobligationattheendofthereportingperiod.Thedefinedbenefitobligationis calculated annually by actuaries using the projected unit credit method.

ThepresentvalueofthedefinedbenefitobligationdenominatedinINRisdeterminedbydiscountingtheestimatedfuturecashoutflowsbyreferencetomarketyieldsattheendofthereportingperiodon government bonds that have terms approximating to the terms of the related obligation.

The interest cost is calculated by applying the discount rate to the net balance of the defined benefit obligation. This cost is included in employee benefit expense in the statement of profit and loss.

Remeasurementgainsandlossesarisingfromexperienceadjustmentsandchangesinactuarialassumptionsarerecognisedintheperiodinwhichtheyoccur,directlyinothercomprehensiveincome.They are included in retained earnings in the statement of changes in equity and in the balance sheet.

Pension obligations (France):

TheFrenchpensionsystemisoperatedona“payasyougo”basis.EachemployeeisentitledtoreceiveabasicpensionfromtheSocialSecurityplusacomplementarypensionfromdefinedcontribution schemesARRCOandAGIRC(solelyformanagementforAGIRC).Moreover,retiringallowances(lumpsums)mustbylawbepaidbytheemployerwhenemployeesretire.Thedefinedbenefitobligation is calculated annually by actuaries using appropriate criteria applicable in France.

(b) Defined contribution plans:

A defined contribution plan is a post-employment benefit plan where the Group’s legal or constructive obligation is limited to the amount that it contributes to a separate legal entity.

India:

TheGroupmakesspecifiedmonthlycontributionstowardsEmployeesProvidentFundOrganisationandEmployeesStateInsuranceCorporation.Obligationsforcontributionstodefinedcontributionplans areexpensedasanemployeebenefitsexpenseinthestatementofprofitandlossinperiodinwhichtherelatedserviceisprovidedbytheemployee.Prepaidcontributionsarerecognisedasanassettothe extent that a cash refund or a reduction in future payments is available.

United States of America:

EligibleemployeesoftheGroupintheUnitedStatesparticipateinanemployeeretirementsavingsplan(the“401KPlan”)undersection401(K)oftheUnitedStatesInternalRevenueCode.The401Kplan allowsfortheemployeestodeferaportionoftheirannualearningsonapre-taxbasisthroughvoluntarycontributionstothe401Kplan.TheGroup’scontributiontotheplanisdiscretionaryandno contribution has been made on this account during the current and previous reporting years.

412Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure V - Material Accounting Policies (All amounts are in INR Millions, except share data, unless otherwise stated)

2. Material accounting policies (continued) x. Employee benefits (continued) Share-based payments Share-basedcompensationbenefitsareprovidedtoemployeesthroughtheAequsStockOptionPlan.ThefairvalueofoptionsgrantedundertheAequsEmployeeStockOptionPlanisrecognisedasan employee benefits expense with a corresponding increase in equity.

The total amount to be expensed is determined by reference to the fair value of the options granted: - including any market performance conditions (e.g., the entity's share price), and - including the impact of any service and non-market performance vesting conditions.

Thetotalexpenseisrecognisedoverthevestingperiod,whichistheperiodoverwhichallofthespecifiedvestingconditionsaretobesatisfiedonanacceleratedbasis.Attheendofeachperiod,theentity revisesitsestimatesofthenumberofoptionsthatareexpectedtovestbasedonthenon-marketvestingandserviceconditions.Itrecognizestheimpactoftherevisiontooriginalestimates,ifany,inprofitor loss, with a corresponding adjustment to equity.

y. Financial guarantee contracts Financialguaranteecontractsarerecognisedasafinancialliabilityatthetimetheguaranteeisissued.Theliabilityisinitiallymeasuredatfairvalueandsubsequentlyatthehigherofthe(i)amount determinedinaccordancewiththeexpectedcreditlossmodelasperIndAS109andtheamountinitiallyrecognisedless,whereappropriate,cumulativeamountofincomerecognisedinaccordancewiththe principlesofIndAS115.Thefairvalueoffinancialguaranteesisdeterminedasthepresentvalueofthedifferenceinnetcashflowsbetweenthecontractualpaymentsunderthedebtinstrumentandthe payments that would be required without the guarantee, or the estimated amount that would be payable to a third party for assuming the obligation.

Where guarantees in relation to loans or other payables of associates are provided for no compensation, the fair values are accounted for as contributions and recognised as part of the cost of the investments.

z. Contributed equity Incremental costs directly attributable to the issue of new shares are shown in equity as a deduction, net of tax, from securities premium. aa. Non-current assets held for sale and discontinued operations Non-currentassetsanddisposalGroupsclassifiedasheldforsalearemeasuredattheloweroftheircarryingvalueandfairvaluelesscoststosell.AssetsanddisposalGroupsareclassifiedasheldforsaleif theircarryingvaluewillberecoveredthroughasaletransactionratherthanthroughcontinuinguse.Thisconditionisonlymetwhenthesaleishighlyprobableandtheasset,ordisposalGroup,isavailable forimmediatesaleinitspresentconditionandismarketedforsaleatapricethatisreasonableinrelationtoitscurrentfairvalue.TheGroupmustalsobecommittedtothesale,whichshouldbeexpectedto qualifyforrecognitionasacompletedsalewithinoneyearfromthedateofclassification.WhereadisposalGrouprepresentsaseparatemajorlineofbusinessorgeographicalareaofoperations,orispartof asingleco-ordinatedplantodisposeofaseparatemajorlineofbusinessorgeographicalareaofoperations,thenitistreatedasadiscontinuedoperations.Thepost-taxprofitorlossofthediscontinued operations together with the gain or loss recognised on its disposal are disclosed as a single amount in the statement of profit and loss, with all prior periods being presented on this basis.

ab. Earnings per share Basic earnings per share

Basic earnings per share is calculated by dividing: • the profit/(loss) attributable to the equity holders of the Group • by the weighted average number of equity shares outstanding during the year.

Diluted earnings per share

Diluted earnings per share is calculated by dividing: • the profit/(loss) after tax as adjusted for dividend, interest (net of any attributable taxes) other charges to expense or income relating to the dilutive potential equity shares, •bytheweightedaveragenumberofequitysharesconsideredforderivingbasicearningspershareandtheweightedaveragenumberofequityshareswhichcouldhavebeenissuedontheconversionofall dilutive potential equity shares.

Potentialequitysharesaredeemedtobedilutiveonlyiftheirconversiontoequityshareswoulddecreasethenetprofitpershareorincreasethenetlosspershare.Potentialdilutiveequitysharesaredeemed to be converted as at the beginning of the period, unless they have been issued at a later date. Dilutive potential equity shares are determined independently for each period presented.

ac. Provisions and onerous contracts ProvisionsarerecognisedwhentheGrouphasapresentlegalorconstructiveobligationasaresultofpastevents,itisprobablethatanoutflowofresourceswillberequiredtosettletheobligationandthe amountcanreliablyestimated.Provisionsarenotrecognisedforfutureoperatinglosses.Provisionsaremeasuredatthepresentvalueofmanagement’sbestestimateoftheexpenditurerequiredtosettlethe presentobligationattheendofthereportingperiod.Thediscountrateusedtodeterminethepresentvalueispre-taxratethatreflectscurrentmarketassessmentsofthetimevalueofmoneyandtherisks specific to the liability. The increase in provision due to the passage of time is recognised as an expense.

AprovisionforonerouscontractisrecognisedwhentheexpectedbenefitstobederivedbytheGroupfromacontractarelowerthantheunavoidablecostofmeetingitsobligationsunderthecontract.The provisionismeasuredatthepresentvalueofthelowerofexpectedcostofterminatingthecontractandtheexpectednetcostofcontinuingwiththecontract.Beforeaprovisionisestablished,theCompany recognizes any impairment loss on the assets associate with the contract.

(This space is intentionally left blank) 413Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure V - Material Accounting Policies (All amounts are in INR Millions, except share data, unless otherwise stated)

3. Use of judgements and estimates ThepreparationoffinancialstatementsinconformitywithIndASrequiresestimatesandjudgementsthataffectthereportedamountsofassetsandliabilities,revenuesandexpenses,andrelateddisclosures ofcontingentliabilitiesinthefinancialstatementsandaccompanyingnotes.Estimatesareusedfor,butnotlimitedtousefullivesofproperty,plantandequipment, accountingforright-of-useassets, impairment of goodwill and investments in associate and joint ventures, and estimation of and recoverability of deferred tax balances. Actual results could differ materially from these estimates.

Inpreparingtheseconsolidatedfinancialstatements,managementhasmadejudgementsandestimatesthataffecttheapplicationoftheGroup’saccountingpoliciesandthereportedamountsofassets, liabilities, income and expenses. Actual results may differ from these estimates.

Estimates and underlying assumptions are reviewed on an ongoing basis. Revisions to estimates are recognised prospectively.

(i) Judgements

Information about judgements made in applying accounting policies that have the most significant effects on the amounts recognised in the financial statements is included in the following notes:

Note 7: investments accounted for using the equity method: whether the Group has significant influence over an investee;

Note 5: lease term: whether the Group is reasonably certain to exercise extension options.

(ii) Assumption and estimation uncertainties Informationaboutassumptionsandestimationuncertaintiesatthereportingdatethathaveariskofresultinginamaterialadjustmenttothecarryingamountsofassetsandliabilitieswithinthenextfinancial

year is included in the following notes:

Note 17: measurement of defined benefit obligations: key actuarial assumptions;

Note 39: recognition of deferred tax assets: availability of future taxable profit against which deductible temporary differences and tax losses carried forward can be utilised;

Note 30: uncertain tax treatments;

Note 42: determining the fair value less costs to sell of the disposal Group on the basis of significant unobservable inputs;

Note 6: impairment test of intangible assets and goodwill: key assumptions underlying recoverable amounts, including the recoverability of development costs;

Notes 11 and 30: recognition and measurement of provisions and contingencies: key assumptions about the likelihood and magnitude of an outflow of resources;

Note 9 (ii): measurement of ECL allowance for trade receivables: key assumptions in determining the weighted-average loss rate; and Notes33:acquisitionofsubsidiary:fairvalueoftheconsiderationtransferred(includingcontingentconsideration)andfairvalueoftheassetsacquiredandliabilitiesassumed,measuredonaprovisional basis.

4. Changes in material accounting policies

Deferred tax related to assets and liabilities arising from a single transaction:

TheGrouphasadoptedDeferredTaxrelatedtoAssetsandLiabilitiesarisingfromaSingleTransaction(AmendmentstoIndAS12)fromApril1,2024.Theamendmentsnarrowthescopeoftheinitial recognitionexemptiontoexcludetransactionsthatgiverisetoequalandoffsettingdifferences–e.g.,leases.Forleasesanddecommissioningliabilities,anentityisrequiredtorecognisetheassociated deferredtaxassetsandliabilitiesfromthebeginningoftheearliestcomparativeperiodpresented,withanycumulativeeffectrecognisedasanadjustmenttoretainedearningsorothercomponentsofequity at that date. For all other transactions, an entity applies the amendments to transactions that occur on or after the beginning of the earliest period presented.

TheGrouppreviouslyaccountedfordeferredtaxonleasesbyapplyingthe‘integrallylinked’approach,resultinginasimilaroutcomeasundertheamendments,exceptthatthedeferredtaxassetorliability wasrecognisedonanetbasis.Followingtheamendments,theGrouphasrecognisedaseparatedeferredtaxassetinrelationtoitsleaseliabilitiesandadeferredtaxliabilityinrelationtoitsright-to-use assetsasatApril1,2021andthereafter.However,therewasnoimpactonthebalancesheetbecausethebalancesqualifyforoffsetunderparagraph74ofIndAS12.Therewasalsonoimpactonthe opening retained earnings as at April 1, 2021as a result of the change. The key impact for the Group relates to disclosure of the deferred tax assets and liabilities recognised in Note 39.

(This space is intentionally left blank) 414Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 4 - Property, Plant and Equipment As at September 30, 2025 Gross carrying amount Accumulated depreciation Net carrying As at Additions Disposals Transfer from Exchange As at As at Charge for the Disposals Transfer from Exchange As at amount as at April 1, 2025 Right of Use differences September 30, April 1, 2025 period Right of Use differences September 30, September 30, asset 2025 assets 2025 2025 Leasehold improvements 58.17 160.21 - - 0.31 218.69 37.78 5.00 - - 0.10 42.88 175.81 Plant and machinery 3,640.69 2,205.06 (15.69) 55.91 27.13 5,913.10 2,040.16 234.38 (2.79) - (5.26) 2,266.49 3,646.61 Computer equipment 136.84 158.24 (0.01) - 0.30 295.37 106.34 12.49 (0.01) - 0.22 119.04 176.33 Office equipment 63.86 9.43 (0.04) - 0.07 73.32 49.49 2.77 (0.04) - 0.05 52.27 21.05 Furniture and fittings 0.58 1.39 - - - 1.97 0.57 0.04 - - - 0.61 1.36 Vehicles 2.02 - - - 1.11 3.13 (1.00) - - - 1.00 - 3.13 Total 3,902.16 2,534.33 (15.74) 55.91 28.92 6,505.58 2,233.34 254.68 (2.84) - (3.89) 2,481.29 4,024.29 As at Septmber 30, 2024 Gross carrying amount Accumulated depreciation Net carrying As at Additions Disposals Transfer from Exchange As at As at Charge for the Disposals Transfer from Exchange As at amount as at April 1, 2024 Right of Use differences September 30, April 1, 2024 period Right of Use differences September 30, September 30, asset 2024 assets 2024 2024 Leasehold improvements 59.50 0.46 - - (1.68) 58.28 34.41 3.11 - - (1.55) 35.97 22.31 Plant and machinery 3,485.39 101.20 (2.33) 29.29 7.87 3,621.42 1,810.21 169.53 (1.60) - 1.53 1,979.67 1,641.75 Computer equipment 125.16 5.74 - - 0.93 131.83 93.12 8.08 - - (0.64) 100.56 31.27 Office equipment 61.81 2.77 - - 0.72 65.30 45.56 2.50 - - 1.31 49.37 15.93 Furniture and fittings 0.69 0.46 (0.03) - (0.35) 0.77 0.41 0.44 (0.03) - (0.07) 0.75 0.02 Vehicles 1.38 - - - 0.58 1.96 0.77 - - - (1.77) (1.00) 2.96 Total 3,733.93 110.63 (2.36) 29.29 8.07 3,879.56 1,984.48 183.66 (1.63) - (1.30) 2,165.32 1,714.24 As at March 31, 2025 Gross carrying amount Accumulated depreciation Net carrying As at Additions Disposals Transfer from Exchange As at As at Charge for the Disposals Transfer from Exchange As at amount as at April 1, 2024 Right of Use differences March 31, 2025 April 1, 2024 year Right of Use differences March 31, 2025 March 31, 2025 asset assets Leasehold improvements 59.50 1.95 - - (3.28) 58.17 34.41 5.22 - - (1.85) 37.78 20.39 Plant and machinery 3,485.39 295.69 (245.06) 93.59 11.08 3,640.69 1,810.21 342.72 (117.41) - 4.64 2,040.16 1,600.53 Computer equipment 125.16 13.74 (2.80) - 0.74 136.84 93.12 15.73 (2.03) - (0.48) 106.34 30.50 Office equipment 61.81 5.03 (3.75) - 0.77 63.86 45.56 5.04 (2.32) - 1.21 49.49 14.37 Furniture and fittings 0.69 0.47 (0.19) - (0.39) 0.58 0.41 0.27 (0.18) - 0.07 0.57 0.01 Vehicles 1.38 - - - 0.64 2.02 0.77 - - - (1.77) (1.00) 3.02 Total 3 ,733.93 3 16.88 ( 251.80) 9 3.59 9 .56 3 ,902.16 1 ,984.48 3 68.98 ( 121.94) - 1 .71 2 ,233.34 1 ,668.82 415Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 4 - Property, Plant and Equipment (continued) As at March 31, 2024 Gross carrying amount Accumulated depreciation Net carrying As at Additions Disposals Transfer from Exchange As at As at Charge for the Disposals Transfer from Exchange As at amount as at April 1, 2023 Right of Use differences March 31, 2024 April 1, 2023 year Right of Use differences March 31, 2024 March 31, 2024 asset assets Leasehold improvements 59.46 (0.02) (0.88) - 0.94 59.50 29.01 5.77 (0.81) - 0.44 34.41 25.09 Plant and machinery 3,204.50 262.69 (161.29) 180.19 (0.70) 3,485.39 1,482.76 346.58 (161.31) 131.24 10.94 1,810.21 1,675.18 Computer equipment 122.01 7.01 (3.88) - 0.02 125.16 78.91 18.98 (3.06) - (1.71) 93.12 32.04 Office equipment 60.00 3.16 (3.85) - 2.50 61.81 40.00 9.28 (3.65) - (0.07) 45.56 16.25 Furniture and fittings 0.58 0.78 (2.57) - 1.90 0.69 0.56 1.67 (2.54) - 0.72 0.41 0.28 Vehicles 1.67 - - - (0.29) 1.38 1.67 - - - (0.90) 0.77 0.61 Total 3,448.22 273.62 ( 172.47) 1 80.19 4 .37 3 ,733.93 1,632.91 3 82.28 ( 171.37) 1 31.24 9 .42 1 ,984.48 1 ,749.45 As at March 31, 2023 Gross carrying amount Accumulated depreciation Net carrying As at Additions Disposals Transfer from Exchange As at As at Charge for the Disposals Transfer from Exchange As at amount as at April 1, 2022 Right of Use differences March 31, 2023 April 1, 2022 year Right of Use differences March 31, 2023 March 31, 2023 assets assets Leasehold improvements 51.41 8.05 - - - 59.46 22.41 6.60 - - - 29.01 3 0.45 Plant and machinery 2,426.48 807.02 (51.00) - 22.00 3,204.50 1,195.76 310.13 (31.00) - 7.87 1,482.76 1 ,721.74 Computer equipment 95.21 27.80 (1.00) - - 122.01 67.91 14.00 (1.00) - (2.00) 78.91 4 3.10 Office equipment 49.56 9.44 - - 1.00 60.00 32.25 6.75 - - 1.00 40.00 2 0.00 Furniture and fittings 0.58 - - - - 0.58 0.56 - - - - 0.56 0 .02 Vehicles 1.67 - - - - 1.67 1.67 - - - - 1.67 - Total 2,624.91 852.31 (52.00) - 23.00 3,448.22 1,320.56 337.48 (32.00) - 6.87 1,632.91 1 ,815.31 a. Refer note 37 for information on property, plant and equipment pledged as security.

b. Refer note 31 disclosure of contractual commitments for the acquisition of property, plant and equipment. c.AdditionsinPlantandmachineryincludeassetstransferredfromRight-of-useassetswithgrosscarryingamountof September30,2025:INR252.71(September30,2024:INR140.17, March31,2025:INR409.01,March31,2024:INR180.19,andMarch 31, 2023: Nil) and accumulated depreciation of September 30, 2025: INR 196.80 ( September 30, 2024: INR 110.88, March 31, 2025: INR 315.90, March 31, 2024: INR 131.24, and March 31, 2023: Nil) on settlement of contractual payments.

(This space is intentionally left blank) 416Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 4A - Capital work-in-progress Particulars As at Additions Capitalized Asset held for As at April 1, 2025 during the sale September 30, period 2025 Capital work-in-progress 3,950.90 2 ,003.63 (2,493.09) - 3,461.44 Particulars As at Additions Capitalized Asset held for As at April 1, 2024 during the sale September 30, period 2024 Capital work-in-progress 1,753.85 9 68.29 - - 2,722.14 Particulars As at Additions Capitalized Asset held for As at April 1, 2024 during the year sale March 31, 2025 Capital work-in-progress 1,753.85 2,227.71 (30.66) - 3,950.90 Particulars As at Additions Capitalized Asset held for As at April 1, 2023 during the year sale March 31, 2024 Capital work-in-progress 16.00 1,753.85 (16.00) - 1,753.85 Particulars As at Additions Capitalized Asset held for As at April 1, 2022 during the year sale March 31, 2023 Capital work-in-progress 21.88 45.25 (21.88) (29.25) 16.00 Asset held in disposal group classified as "Held for sale"- Refer Note 42 (This space is intentionally left blank) 417Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 4A - Capital work-in-progress (continued) Aging of Capital work-in-progress as at September 30, 2025 Amounts in Capital work-in-progress Less than 1-2 years 2-3 years More than Total 1 year 3 years Projects in progress 2,312.29 1 ,058.79 9 0.36 - 3 ,461.44 Total 2 ,312.29 1 ,058.79 9 0.36 - 3 ,461.44 Aging of Capital work-in-progress as at September 30, 2024 Amounts in Capital work-in-progress Less than 1-2 years 2-3 years More than Total 1 year 3 years Projects in progress 2,051.90 6 70.24 - - 2 ,722.14 Total 2 ,051.90 6 70.24 - - 2 ,722.14 Aging of Capital work-in-progress as at March 31, 2025 Amounts in Capital work-in-progress Less than 1-2 years 2-3 years More than Total 1 year 3 years Projects in progress 2,228.20 1 ,722.70 - - 3 ,950.90 Projects temporarily suspended - - - - Total 2 ,228.20 1 ,722.70 - - 3 ,950.90 Aging of Capital work-in-progress as at March 31, 2024 Amounts in Capital work-in-progress Less than 1-2 years 2-3 years More than Total 1 year 3 years Projects in progress 1,723.23 30.62 - - 1 ,753.85 Total 1,723.23 30.62 - - 1,753.85 Aging of Capital work-in-progress as at March 31, 2023 Amounts in Capital work-in-progress Less than 1-2 years 2-3 years More than Total 1 year 3 years Projects in progress 15.76 0.24 - - 16.00 Total 15.76 0.24 - - 16.00 Capitalisation of expenditure Following are the directly attributable costs which are capitalized. Consequently, expenses disclosed under the respective notes are net of amounts capitalized by the Group.

30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 Other expenses 137.32 82.88 4 48.04 9 8.99 - Employee benefit expenses 136.19 116.00 2 75.12 9 4.55 3 7.64 Finance cost 119.65 103.65 2 17.74 1 16.02 - Cost of materials consumed 252.18 126.11 7 4.51 - - Depreciation on right-of-use assets 17.37 22.73 4 3.38 2 1.72 - 6 62.71 4 51.38 1 ,058.79 3 31.28 3 7.64 418Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 4B - Investment property Particulars Gross carrying amount Accumulated depreciation Net carrying As at Additions Disposals Exchange As at As at Charge for the year Disposals Exchange As at amount as at April 1, 2023 differences March 31, April 1, 2023 differences March 31, 2024 March 31, 2024 2024 Land and building 1 97.00 - ( 197.00) - - 1 33.06 0 .02 ( 133.08) - - - Total 1 97.00 - ( 197.00) - - 1 33.06 0 .02 ( 133.08) - - - Particulars Gross carrying amount Accumulated depreciation Net carrying As at Additions Disposals Exchange As at As at Charge for the year Disposals Exchange As at amount as at April 1, 2022 differences March 31, April 1, 2022 differences March 31, 2023 March 31, 2023 2023 Land and building 1 85.10 - - 1 1.90 1 97.00 1 00.33 2 4.87 - 7.86 1 33.06 6 3.94 Total 1 85.10 - - 1 1.90 1 97.00 1 00.33 2 4.87 - 7.86 1 33.06 6 3.94 Notes

(a) Investment property comprises of commercial properties that are leased to third parties. The lease is entered for a term of 9 years and the lessee has an option to terminate at the end of each 3 year period. Subsequent renewals are negotiated with the lessee.

(b) Amounts recognised in profit or loss for investment properties.

Period ended Period ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Rental income from operating leases (included in Note 19 - Other income) - - - 1.55 1 1.58 Depreciation (included in Note 25 - Depreciation and amortisation expense) - - - 0.02 2 4.87 Gain on sale of investment property (included in Note 26 - Exceptional items) - - - 186.38 -

(c) Leasing arrangements The investment properties are leased to tenant under operating lease with rentals payable monthly. Lease payments include inflationary increment, but there are no other variable lease payments that depend on an index or rate.

Minimum lease payments receivable on leases of investment properties are as follows:

As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Within 1 year - - - - 1 .65 Between 1 and 5 years - - - - - - - - - 1 .65 As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(d) Fair value of investment property - - - - 2 45.71

(i) Fair value hierarchy The fair value of investment property was determined by an accredited external independent property valuer. The said property valuer is a registered valuer as defined under Rule 2 of the Companies (Registered Valuers and Valuation) Rules, 2017.

(ii) Valuation technique The Group primarily follows the income capitalization and direct comparison techniques for property valuation. Management considers information such as current prices in the market or recent prices of similar properties in less active markets, adjusted to reflect differences, if any to evaluate the fair value of investment property as at each year-end.

(This space is intentionally left blank) 419Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 5 - Right of use assets TheGrouphasenteredintoagreementswithlessorsforleaseofbuilding(factorypremises)andplantandmachinery.Theleasetermrangesfrom6to10yearsandincrementalborrowingraterangesfrom6%-13.5%.Somepropertyleasescontainextensionoptions exercisablebytheGroup.Wherepracticable,theGroupseekstoincludeextensionoptionsinnewleasestoprovideoperationalflexibility.TheextensionoptionsheldareexercisablebytheGroupandthelessors.TheGroupassessesattheleasecommencementdate whether it is reasonably certain to exercise the extension options. The Group reassesses whether it is reasonably certain to exercise the options if there is a significant event or significant changes in circumstances within its control.

Gross carrying amount Accumulated depreciation Net carrying As at Additions Disposals/ Exchange As at As at Charge for the Disposals/ Exchange As at amount as at Particulars April 1, 2025 transfer to PPE differences September 30, April 1, 2025 period* transfer to PPE differences September 30, September 30, and CWIP 2025 and CWIP* 2025 2025 Building 3 ,844.59 4 .41 - 8.52 3,857.52 1 ,579.05 1 97.84 - 4.79 1 ,781.68 2 ,075.84 Plant and machinery 2 ,486.58 1 19.31 ( 252.71) 62.27 2,415.45 1 ,402.87 1 19.98 (196.80) 38.55 1 ,364.60 1 ,050.85 Total 6 ,331.17 1 23.72 (252.71) 70.79 6 ,272.97 2,981.92 3 17.82 (196.80) 43.34 3 ,146.28 3 ,126.69 * Depreciation of right-of-use assets includes an amount of ₹ 17.37 (March 31, 2025: ₹ 43.38) which has been capitalized and taken to CWIP- Note 4A Gross carrying amount Accumulated depreciation Net carrying As at Additions Disposals/ Exchange As at As at Charge for the Disposals/ Exchange As at amount as at Particulars April 1, 2024 transfer to PPE differences September 30, April 1, 2024 period* transfer to PPE differences September 30, September 30, 2024 2024 2024 Building 3 ,979.60 1 39.41 (61.43) ( 0.54) 4 ,057.04 1 ,230.60 2 12.95 (15.10) 0 .68 1 ,429.13 2 ,627.91 Plant and machinery 2 ,831.52 7 2.76 (140.17) 1 9.57 2,783.68 1 ,468.12 1 33.45 (110.88) 8 .99 1 ,499.68 1 ,284.00 Total 6 ,811.12 2 12.17 ( 201.60) 1 9.03 6,840.72 2 ,698.72 3 46.40 (125.98) 9 .68 2 ,928.81 3 ,911.91 * Depreciation of right-of-use assets includes an amount of ₹ 22.73 which has been capitalized and taken to CWIP- Note 4A.

Gross carrying amount Accumulated depreciation Net carrying As at Additions Disposals/ Exchange As at As at Charge for the Disposals/ Exchange As at amount as at Particulars April 1, 2024 transfer to PPE differences March 31, 2025 April 1, 2024 year transfer to PPE differences March 31, 2025 March 31, 2025 Building 3 ,979.60 1 39.13 (273.79) ( 0.34) 3 ,844.59 1 ,230.60 3 67.18 (20.69) 1 .96 1 ,579.05 2 ,265.54 Plant and machinery 2 ,831.52 7 2.76 (429.35) 1 1.65 2,486.58 1 ,468.12 2 57.68 (333.25) 1 0.32 1 ,402.87 1 ,083.71 Total 6 ,811.12 2 11.89 (703.14) 1 1.31 6,331.17 2 ,698.72 6 24.86 (353.94) 1 2.28 2 ,981.92 3 ,349.25 * Depreciation of right-of-use assets includes an amount of ₹ 43.38 (March 31, 2024: nil; March 31, 2023: nil) which has been capitalized and taken to CWIP- Note 4A.

Gross carrying amount Accumulated depreciation Net carrying As at Additions Disposals Exchange As at As at Charge for the Disposals Exchange As at amount as at Particulars April 1, 2023 differences March 31, 2024 April 1, 2023 year differences March 31, 2024 March 31, 2024 Building 3 ,380.01 6 57.44 (58.29) 0 .44 3,979.60 8 99.04 3 81.03 (59.28) 9.81 1 ,230.60 2 ,749.00 Plant and machinery 3 ,008.01 0 .87 ( 180.19) 2 .83 2,831.52 1 ,320.08 2 62.86 ( 131.14) 1 6.32 1 ,468.12 1 ,363.40 Total 6 ,388.02 6 58.31 (238.48) 3 .27 6,811.12 2 ,219.12 6 43.89 (190.42) 2 6.13 2 ,698.72 4 ,112.40 Gross carrying amount Accumulated depreciation Net carrying As at Additions On account of Exchange As at As at Charge for the On account of Exchange As at amount as at April 1, 2022 business differences/ March 31, 2023 April 1, 2022 year business differences/ March 31, 2023 March 31, 2023 Particulars combination Adjustments combination Adjustments (Refer note a and (Refer note a and b) b) Building 2 ,132.23 1 ,450.00 ( 205.00) 2.78 3 ,380.01 7 05.24 3 10.00 ( 111.00) (5.20) 8 99.04 2 ,480.97 Plant and machinery 2 ,894.51 6 3.00 - 50.50 3,008.01 1 ,025.98 2 78.91 - 15.19 1 ,320.08 1 ,687.93 Total 5 ,026.74 1 ,513.00 ( 205.00) 53.28 6 ,388.02 1,731.22 5 88.91 ( 111.00) 9.99 2 ,219.12 4 ,168.90

(a) Additions in ROU assets includes exchange difference with gross carrying amount of INR 3 (March 31, 2024: INR 53 and March 31, 2023: INR (9)) and accumulated depreciation of INR 25 (March 31, 2024: INR 10 and March 31, 2023: INR (10)).

(a) Refer Note 4(d)

(b) Right of use assets includes INR 23 in March 31, 2024 and INR (15) in March 31, 2023 towards net exchange loss/ (gain) capitalised.

(b) Disposal includes transfer of ROU plant and machinery for gross block INR 180 (March 31, 2024 and March 31, 2023: Nil) and accumulated depreciation INR 131 (March 31, 2024 and March 31, 2023: Nil) after repayment of all instalments of lease.

(b) Lease liability Particulars 30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 Current 658.67 566.33 694.28 563.68 519.96 Non-current 2,694.70 3,397.76 2,785.57 3,506.82 3,377.90 Total 3,353.37 3,964.09 3,479.85 4,070.50 3,897.86 420Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 5 - Right of use assets (continued)

(c) Company's lease liabilities, by maturity, are as follows:

Particulars 30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 Less than one year 928.02 919.08 953.80 721.17 767.15 Between one and five years 2,835.95 3,356.21 2,458.40 2,881.32 3,009.93 After five years 536.05 969.96 1,028.67 1,171.94 1,444.16 Total minimum lease payments 4,300.02 5,245.25 4,440.87 4,774.43 5,221.24

Less: imputed interest 946.65 1,281.16 961.02 703.93 1,323.38 Present value of lease payments 3,353.37 3,964.09 3,479.85 4,070.50 3,897.86

(d) The following are the amounts recognized in the restated statement of profit and loss and restated statement of cash flows:

Particulars 30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 Depreciation of right-of-use assets 300.46 323.67 624.86 643.89 588.91 Interest expense on lease liabilities 132.24 143.70 276.94 303.76 240.03

22.21 19.27 39.47 36.27 41.62 Expense relating to leases of low-value assets (included in other expenses) Cash outflow for leases (principal and interest) 465.27 415.66 838.57 772.17 602.50 (This space is intentionally left blank) 421Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 6 - Intangible assets As at September 30, 2025 Particulars Gross carrying amount Accumulated amortisation Net carrying As at Additions Disposals Exchange As at As at Charge for the Disposals Exchange As at amount as at April 1, 2025 differences September 30, 2025 April 1, 2024 period differences September 30, September 30, 2025 2025 Software 1 76.67 8 .18 - 0 .70 1 85.55 1 26.59 7 .54 - 0 .68 1 34.81 5 0.74 Technical knowhow 1 27.39 - - - 1 27.39 1 16.24 8 .87 - 1 25.11 2 .28 Total 3 04.06 8 .18 - 0 .70 3 12.94 2 42.83 1 6.41 - 0 .68 2 59.92 5 3.02 Goodwill 6 55.21 - - - 6 55.21 4 82.65 - - - 4 82.65 1 72.56 As at September 30, 2024 Particulars Gross carrying amount Accumulated amortisation Net carrying As at Additions Disposals Exchange As at As at Charge for the Disposals Exchange As at amount as at April 1, 2024 differences September 30, 2024 April 1, 2024 year differences September 30, September 30, 2024 2024 Software 1 61.90 7 .29 - 0 .15 1 69.34 1 13.84 7 .49 - ( 2.08) 1 19.25 5 0.09 Technical knowhow 1 28.33 - - ( 0.42) 1 27.91 9 0.96 1 4.38 - 2 .44 1 07.78 2 0.13 Total 2 90.23 7 .29 - ( 0.27) 2 97.25 2 04.80 2 1.87 - 0 .36 2 27.03 7 0.22 Goodwill 6 55.21 - - - 6 55.21 - 4 82.65 - - 4 82.65 1 72.56 As at March 31, 2025 Particulars Gross carrying amount Accumulated amortisation Net carrying As at Additions Disposals Exchange As at As at Charge for the Disposals Exchange As at amount as at April 1, 2024 differences March 31, 2025 April 1, 2024 year differences March 31, 2025 March 31, 2025 Software 1 61.90 1 5.64 ( 0.97) 0 .10 1 76.67 1 13.84 1 5.22 ( 0.97) ( 1.50) 1 26.59 5 0.08 Technical knowhow 1 28.33 - - ( 0.94) 1 27.39 9 0.96 2 5.00 - 0 .28 1 16.24 1 1.15 Total 2 90.23 1 5.64 ( 0.97) ( 0.84) 3 04.06 2 04.80 4 0.22 ( 0.97) ( 1.22) 2 42.83 6 1.23 Goodwill 6 55.21 - - - 6 55.21 - 4 82.65 - - 4 82.65 1 72.56 As at March 31, 2024 Particulars Gross carrying amount Accumulated amortisation Net carrying As at Additions Disposals Exchange As at As at Charge for the Disposals Exchange As at amount as at April 1, 2023 differences March 31, 2024 April 1, 2023 year differences March 31, 2024 March 31, 2024 Software 1 53.53 1 0.39 ( 2.52) 0 .50 1 61.90 9 8.75 1 9.03 ( 2.26) ( 1.68) 1 13.84 4 8.06 Technical knowhow 1 63.12 0 .81 ( 35.81) 0 .21 1 28.33 8 3.90 3 1.63 ( 25.10) 0 .53 9 0.96 3 7.37 Total 3 16.65 1 1.20 ( 38.33) 0 .71 2 90.23 1 82.65 5 0.66 ( 27.36) ( 1.15) 2 04.80 8 5.43 Goodwill 6 55.21 - - - 6 55.21 - - - - - 6 55.21 As at March 31, 2023 Particulars Gross carrying amount Accumulated amortisation Net carrying As at Additions Adjustment Exchange As at As at Charge for the Adjustment Exchange As at amount as at April 1, 2022 differences March 31, 2023 April 1, 2022 year differences March 31, 2023 March 31, 2023 Software 1 47.53 9 .00 - ( 3.00) 1 53.53 8 6.75 1 4.00 - ( 2.00) 9 8.75 5 4.78 Technical knowhow 1 66.12 1 4.00 ( 17.00) - 1 63.12 7 3.91 2 9.90 ( 17.00) ( 2.91) 8 3.90 7 9.22 Customer rights and 1 01.00 - ( 101.00) - - 1 00.95 - ( 101.00) 0 .05 0 .00 ( 0.00) others Total 4 14.65 2 3.00 ( 118.00) ( 3.00) 3 16.65 2 61.61 4 3.90 ( 118.00) ( 4.86) 1 82.65 1 34.00 Goodwill 6 53.21 - - 2 .00 6 55.21 - - - - - 6 55.21

(a) Technical knowhow comprises of capitalised product development costs being an internally generated intangible asset.

422Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 6 - Intangible assets (continued)

(c) Impairment tests for goodwill Goodwillismonitredatthelevelofthesubsidiariestowhichthegoodwillhasbeenallocated. TheGrouptestswhethergoodwillhassufferedanyimpairmentonanannualbasis.Therecoverableamountofthecashgeneratingunits(CGUs)wasdetermined basedonvalue-in-usecalculationswhichrequiretheuseofassumptions.Thecalculationsusecashflowprojectionsbasedonfinancialbudgetsapprovedbymanagementcoveringafive-yearperiod.Thesegrowthratesareconsistentwithforecastsincluded in industry reports specific to the industry in which the CGU operates.

Goodwill has been allocated to the CGUs as below:

Particulars 30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 Aequs Force Consumer Products Private Limited (AFCPPL) - - - 482.14 482.14 Aerostructures Assemblies India Private Limited (AAI) 148.49 148.49 148.49 148.49 148.49 Aequs Aeromachine Inc (AAM) 24.07 24.07 24.07 24.58 24.58 Total 172.56 172.56 172.56 655.21 655.21

The assumptions used in the impairment testing is as below:

Particulars 30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 AFCPPL AAI AFCPPL AAI AFCPPL AAI AFCPPL AAI AFCPPL AAI Average sales growth rate Average of 7.5% Average of 22.67% Average of 5.67% Average of 22.67% Average of 5.67% Average of 36.54% Average of 2.08% Average of 35.00% Average of 10.00% Discount rate 17.40% 14.59% 17.40% 14.59% 17.40% 13.50% 17.40% 15.10% 17.20% Terminal value growth rate 5.00% 5.00% 5.00% 5.00% 5.00% 5.00% 5.00% 5.00% 5.00%

Significant estimate: Impact of - 0.5% decrease in sales growth rate 10.49 10.14 12.07 10.14 12.07 49.81 16.25 24.00 11.00 will lead to a change in the entity's Not applicable

valuation by: - 0.5% decrease in terminal growth 11.65 15.18 10.25 15.18 10.25 10.63 13.73 79.00 16.00 rate will lead to a change in the entity's

valuation by:

The discount rate is a measure estimated based on the historical industry averaged weighted-average cost of capital. Debt leveraging as applicable to the region has been considered with relevant region’s applicable interest rate.

Revenuegrowthhasbeenprojectedtakingintoaccounttheaveragegrowthlevelsexperiencedoverthepastyearsandtheestimatedsalesvolumeandpricegrowthforthenextforeseeableperiod.Theterminalgrowthratehasbeendeterminedbasedon management’s estimate of the long-term compound annual EBITDA growth rate, consistent with the assumptions that a market participant would make.

DuringthesixmonthsperiodendedSeptember30,2024,theGroupnotedthatitdidnotmeetitsrevenueandEBITDAassumptionsforAFCPPL,duetosignificantandunexpecteddeclineinmarketdemandandhencetestedthegoodwillforimpairment basedonthesetriggers.BasedontheGroup'sassessmentoffuturebusinessandpossiblemarginsitdeterminedthatthecarryingvalueoftheCGUexceededthefairvalueofINR324.01andaccordinglyrecordedanimpairmentofINR482.65,whichhas been disclosed as an exceptional item in the statement of profit and loss.

Inadditiontothis,forthesixmonthsperiodendedSeptember30,2025andSeptember30,2024,yearendedMarch31,2025,March31,2024,andMarch31,2023,therewerenootherprobablescenarioswheretheCGU’s/groupofCGU’srecoverable amount would fall below its carrying amount.

(d) Capitalisation of expenditure Following are the directly attributable costs which are capitalized. Consequently, expenses disclosed under the respective notes are net of amounts capitalized by the Group.

30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 Employee benefit expenses - - - - 8 .42 Legal and professional fees - - - - 2 .45 Others - - - - 1 .06 - - - - 1 1.93 423Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 6A - Intangible assets under development As at Additions Transfer Effect of exchange As at April 1, 2025 differences September 30, 2025 Software - - - - - Technical knowhow - - - - - Total - - - - - As at Additions Transfer Effect of exchange As at April 1, 2024 differences September 30, 2024 Software - - - - - Technical knowhow - - - - - Total - - - - - As at Additions Transfer Effect of exchange As at April 1, 2024 differences March 31, 2025 Software - - - - - Technical knowhow - - - - - Total - - - - - As at Additions Transfer Effect of exchange As at April 1, 2023 differences March 31, 2024 Software - - - - - Technical knowhow 4 .13 5 .47 ( 4.40) ( 5.20) - Total 4 .13 5 .47 ( 4.40) ( 5.20) - As at Additions Transfer Effect of exchange As at April 1, 2022 differences March 31, 2023 Software 0 .82 - ( 0.82) - - Technical knowhow 2 .82 4 .13 ( 2.82) - 4 .13 Total 3 .64 4 .13 ( 3.64) - 4 .13

Note: Intangible assets under development mainly comprises of cost of software implementation under progress and cost incurred towards new products under development. (This space is intentionally left blank) 424Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 6A - Intangible assets under development (continued) Ageing as of September 30, 2025 Amount in intangible assets under Total Less than 1 - 2 Years 2 - 3 Years More than 3 Years 1 year Projects in progress - - - - - Total - - - - - Ageing as of September 30, 2025 Amount in intangible assets under Total Less than 1 - 2d Yeveealrospment for 2a -p 3e rYioeda rosf More than 3 Years 1 year Projects in progress - - - - - Total - - - - - Ageing as of March 31, 2025 Amount in intangible assets under Total Less than 1 - 2 Years 2 - 3 Years More than 3 Years 1 year Projects in progress - - - - - Total - - - - - Ageing as of March 31, 2024 Amount in intangible assets under Total Less than 1 - 2 Years 2 - 3 Years More than 3 Years 1 year Projects in progress - - - - - Total - - - - - Ageing as of March 31, 2023 Amount in intangible assets under Total Less than 1 - 2 Years 2 - 3 Years More than 3 Years 1 year Projects in progress 4.13 - - - 4.13 Total 4.13 - - - 4.13 Capitalisation of expenditure Following are the directly attributable costs which are capitalized. Consequently, expenses disclosed under the respective notes are net of amounts capitalized by the Group.

30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 Employee benefit expenses - - - - 2 .98 Legal and professional fees - - - - 0 .94 Others - - - - 0 .21 - - - - 4 .13 425Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 7 - Investments accounted for using equity method As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Investment in equity instruments of associate, unquoted, fully paid-up Investment in equity instruments of joint ventures, unquoted, fully paid-up - Aerospace Processing India Private Limited 2 69.74 206.73 238.96 178.03 139.29 - SQuAD Forging India Private Limited 5 43.33 468.43 497.15 443.58 435.61 - Aequs Cookware Private Limited - 41.50 32.01 - -

813.07 716.66 768.12 621.61 574.90 Aggregate market value of quoted investments - - - - - Aggregate amount of unquoted investments 813.07 716.66 768.12 621.61 574.90 Aggregate amount of impairment in the value of investments - - - - -

Notes: i. Refer Note 40 for summarized financial information of associates and joint ventures ii.InvestmentinAerospaceProcessingIndiaPrivateLimitedincludes₹6.32(September30,2024:₹6.32,March31,2025:₹6.32,March31,2024:₹11.01,March31,2023:₹5.00)towardsfairvalueoffinancial guarantee extended. (Refer Note 15(i)) iii.InvestmentinSQUADForgingIndiaPrivateLimitedincludes₹40.33(September30,2024:₹39.43,March31,2025:₹40.33,March31,2024:₹53.21,March31,2023:₹52.00)towardsfairvalueoffinancial guarantee extended. (Refer Note 15(i)) iv.InvestmentinAequsCookwarePrivateLimitedincludes₹64.29(September30,2024:₹64.29,March31,2025:₹64.29,March31,2024,March31,2023: ₹0.00)towardsfairvalueoffinancialguarantee extended. (Refer Note 15(i)) v.DuringtheperiodendedSeptember30,2025,theCompanyrecogniseditsshareoflossesofAequsCookwarePrivateLimiteduntilthecarryingvalueoftheinvestmentwasreducedtoNil.TheGroup’sshareof losses in excess of the investment amounting to ₹ 10.57 has been recognised under other financial liabilities. (Refer note 15 (ii)) For the period ended For the period ended For the year ended For the year ended For the year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 v. Investment in the following entities includes cost of shared based compensation:

SQuAD Forging India Private Limited 1.32 1.16 1.32 0.49 1.00 Aerospace Processing India Private Limited 0.00 0.00 - (0.09) - Aequs Cookware Private Limited 0.16 - 0.16 - - vi. Investment in the following entities includes share of profit/ (loss) of joint ventures accounted under the equity method:

SQuAD Forging India Private Limited 46.18 24.46 52.12 1 8.40 ( 17.50) Aerospace Processing India Private Limited 30.77 28.70 60.65 34.00 9.00 Aequs Cookware Private Limited ( 43.12) - (27.53) - - Note 8 (i) - Non-current investments As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Investments at fair value through profit and loss Unquoted Investment in government securities 0.94 0.86 0.85 0.83 0.81

0.94 0.86 0.85 0.83 0.81 Aggregate market value of quoted investments - - - - - Aggregate amount of unquoted investments 0.94 0.86 0.85 0.83 0.81 Aggregate amount of impairment in the value of investments - - - - - Note 8 (ii) - Current investments Unquoted Investment in equity instruments (Fully paid up) - Aequs Foundation - 0.00 - 0.00 - September30,2025:Nil(September30,2024:200,March31,2025:Nil,March31, 2024: 200, March 31, 2023: 1,000) equity shares of ₹ 10 each fully paid-up

Less: Impairment in the value of investment - (0.00) - (0.00) - - - - - -

Note:

DuringtheyearendedMarch31,2024,theParentCompanysold800equitysharesofAequsFoundation.DuringtheperiodendedSeptember30,2024,theParentCompanyhassoldreamainingholdingof200equity shares of Aequs Foundation. The carrying value of the investment is Nil as at September 30,2024 and March 31, 2025.

Investments mandatorily at fair value through profit and loss Quoted Investment in mutual funds Investment in mutual funds - 3 71.28 - 297.15 - - 371.28 - 297.15 - Aggregate amount of quoted investments - 371.28 - 297.15 - Aggregate amount of unquoted investments - 0.00 - 0.00 - Aggregate amount of impairment in the value of investments - 0.00 - 0.00 -

Note: Based on the latest published NAVs by the respective fund houses.

426Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 9 (i) - Loans Non-current (unsecured, considered good) As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Loans to related party (Refer Note (iii) - - - - 5.67

Less: Loss allowance - - - - (5.67) - - - - - Breakup of loans Loans considered good - unsecured - - - - - Loans - credit impaired - - - - 5.67 Total - - - - 5.67

Less: Loss allowance - - - - (5.67) Total loans - - - - -

Note:

(i)TheHoldingCompany'ssubsidiaryhadissuedaguaranteetoaBankinIndiatoenableAequsAerospaceBV,aforeignassociateoftheCompany,todrawdownloansinearlieryears.Inrespectoftheloanavailedin 2016,certaininstallmentsamountingto₹119.00wasdirectlypaidbytheSubsidiarytothebankoveraperiodoffiveyearstomeetitsongoingrepaymentobligations.ThesubsidiaryisindiscussionswithitsAuthorised DealertoregularisethecompliancerequirementsunderForeignExchangeManagementAct,1999andregulationsthereunder(FEMARegulations)inrespectofthesetransactions,ifany.Pendingsuchregularisation, thereisuncertaintywhetherpenaltymaybeleviedundertheFEMARegulationsandaccordingly,noadjustmentshavebeenmadetothesefinancialstatements.TheCompanybelievesthatthepotentialimpactof penalties, if any, is not expected to be material. The above non-compliance matter was regularised in August, 2025.

(ii)AsatMarch31,2023,LoantorelatedpartyofINR5.67representsloansgiventoAequsRajasExtrusionPrivateLimited(AREPL)carryinganinterestrateof12%p.a..Theloanisrepayablewithin48monthsafter theendofmoratoriumperiodof12monthsfromthedateofdisbursement.TheParentcompanyhasanoptiontoconverttheborrowing,eitherfullyorpartiallytobeconvertedinequitysharecapitalintheeventof default.

As at As at As at As at As at Note 9 (ii) - Trade receivables September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(Unsecured) Trade receivables from other than related parties (considered good) 1,829.07 1,627.38 1,583.47 1,387.88 1,030.55 Receivables from related parties (considered good) (refer note 35) 13.61 20.45 1 3.01 7 .25 4 0.73 Trade receivables from other than related parties (which have significant increase in credit risk) - - - - 40.54

Less: Loss allowance (refer note 28 for movement in loss allowance) (30.12) (25.98) ( 30.44) ( 26.28) ( 40.54) Total trade receivables 1,812.56 1,621.85 1,566.04 1,368.85 1,071.28 Ageing of trade receivables as on September 30, 2025 Particulars Outstanding for following periods from due date Total Not due Less than 6 6 months- 1-2 years 2-3 years More than 3 years months 1 year Undisputed trade receivables Considered good 1,481.20 239.64 5 5.61 2 1.01 - 9.24 1 ,806.70 1 ,481.20 2 39.64 5 5.61 2 1.01 - 9 .24 1 ,806.70

Less: Loss allowance - - - (20.87) - (9.24) ( 30.11) Unbilled revenue 3 5.97 - - - - - 3 5.97 1 ,481.20 2 39.64 5 5.61 0 .14 - 0 .00 1 ,812.56 Ageing of trade receivables as on September 30, 2024 Particulars Outstanding for following periods from due date Total Not due Less than 6 6 months- 1-2 years 2-3 years More than 3 years months 1 year Undisputed trade receivables Considered good 1,188.65 264.77 5 8.36 1 8.18 22.57 - 1,552.54 Which have significant increase in credit risk - - - - - - - 1,188.65 264.77 5 8.36 1 8.18 22.57 - 1,552.54

Less: Loss allowance - - - (17.78) ( 8.22) - ( 26.00) Unbilled revenue 95.31 - - - - - 9 5.31 1,283.96 264.77 5 8.36 0 .41 14.35 - 1,621.85 Ageing of trade receivables as on March 31, 2025 Particulars Outstanding for following periods from due date Total Not due Less than 6 6 months- 1-2 years 2-3 years More than 3 years months 1 year Undisputed trade receivables Considered good 1,288.66 257.18 1 8.00 2 0.10 - 12.54 1,596.48 Which have significant increase in credit risk - - - - - - - 1,288.66 257.18 1 8.00 2 0.10 - 12.54 1,596.48

Less: Loss allowance - - - - - - Unbilled revenue - - - (20.10) - ( 10.34) ( 30.44) 1,288.66 257.18 1 8.00 - - 2.20 1,566.04 Ageing of trade receivables as on March 31, 2024 Particulars Outstanding for following periods from due date Not due Less than 6 6 months- 1-2 years 2-3 years More than 3 years Total months 1 year Undisputed trade receivables Considered good 1 ,184.23 1 23.50 1 3.55 5 7.76 1 5.13 0 .96 1 ,395.13 Which have significant increase in credit risk - - - - - - - 1 ,184.23 1 23.50 1 3.55 5 7.76 1 5.13 0 .96 1 ,395.13

Less: Loss allowance - ( 2.16) ( 2.23) ( 19.92) ( 1.97) - ( 26.28) 1 ,184.23 1 21.34 1 1.32 3 7.84 1 3.16 0 .96 1 ,368.85 427Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 9 (ii) - Trade receivables (continued) Ageing of trade receivables as on March 31, 2023 Particulars Outstanding for following periods from due date of payment Total Not due Less than 6 6 months- 1-2 years 2-3 years More than 3 years months 1 year Undisputed trade receivables Considered good 8 82.02 1 59.38 28.24 0 .73 0 .60 0 .31 1 ,071.28 Which have significant increase in credit risk 2 .05 2 .22 1 3.18 1 7.51 5 .58 - 4 0.54 8 84.07 1 61.60 4 1.42 1 8.24 6 .18 0 .31 1 ,111.82

Less: Loss allowance ( 2.05) ( 2.22) ( 13.18) ( 17.51) ( 5.58) - ( 40.54) 8 82.02 1 59.38 2 8.24 0 .73 0 .60 0 .31 1 ,071.28

Note:

Refer note 37 for information on lien/charge against trade receivables.

As at As at As at As at As at Note 9 (iii) - Cash and cash equivalents September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Cash on hand 0.31 0.07 0.03 0.05 0.07

Balances with banks: - In current accounts 277.99 332.37 296.70 290.75 361.76 - Deposits with original maturity of less than 3 months 292.82 324.73 312.70 501.94 151.04 - Funds in transit 0.81 - - - -

571.93 657.17 609.43 792.74 512.87

Note:

There are no repatriation restrictions with regard to cash and cash equivalents as at the end of reporting period and prior periods.

Note 9 (iv) - Bank balances other than above Margin money deposits 105.28 61.70 188.01 38.29 53.20 Deposits with original maturity of more than 3 months but less than 12 months 121.03 693.05 0.47 1,688.72 7.61

226.31 754.75 188.48 1,727.01 60.81

Note: a. Margin money deposits are against letter of credit issued in favour of domestic and foreign vendors Note 9 (v) - Other financial assets (Unsecured, considered good, unless otherwise specified) Non-current Deferred consideration receivable (Refer note 33) 300.53 - 300.53 - - Deposits with banks 86.75 30.04 15.85 - 2.29 Security deposits 392.81 405.60 389.86 394.52 335.14

780.09 435.64 706.24 394.52 337.43 Current Recoverable from related parties 20.76 20.63 24.01 31.57 51.32 Government grant receivable (refer note 19) 76.23 - 91.80 - - Deferred consideration receivable (Refer note 33) 36.06 - 18.03 - - MEIS receivable - - - - 13.60 Security deposits - 0.30 0.01 0.29 - Other financial assets 12.03 10.71 16.03 12.40 9.57

Less: Expected credit loss ( 20.76) ( 20.63) ( 21.16) ( 29.11) ( 41.30)

124.32 11.01 128.72 15.15 33.19 Expected credit loss includes Expected credit loss for recoverable from related party ( 20.76) ( 20.63) ( 21.16) ( 29.11) ( 27.70) Provision for doubtful export incentives receivable - - - - ( 13.60) ( 20.76) ( 20.63) ( 21.16) ( 29.11) ( 41.30) Note 10 - Other assets Non-current Capital advances 209.83 152.05 101.51 127.80 50.60 Prepaid expenses 26.89 33.16 31.84 42.24 27.50 Balance with statutory authorities - - - 0.14 1.07

Less: Loss allowance ( 7.73) ( 11.16) ( 0.27) ( 11.16) ( 0.64)

228.99 174.05 133.08 159.02 78.53 Loss allowance includes Provision for doubtful advances ( 7.73) ( 11.16) ( 0.27) ( 11.16) - Provision for doubtful balances with statutory authorities - - - - ( 0.64) ( 7.73) ( 11.16) ( 0.27) ( 11.16) ( 0.64) Current Advance to suppliers 307.33 206.04 233.74 105.04 59.21 Advances to employees 7.30 4.53 9.80 3.84 3.86 Prepaid expenses 168.51 61.65 98.93 75.23 71.21 Unamortized financial guarantee expense 49.21 56.79 50.88 62.90 2.71 Balance with statutory authorities 408.41 400.96 415.17 341.36 181.36 Provision for doubtful balances with statutory authorities ( 0.30) ( 0.30) ( 0.30) ( 0.17) ( 0.60) 9 40.46 7 29.67 8 08.22 5 88.20 3 17.75 428Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Note 11 - Inventories Raw materials 2,233.83 2,105.99 2,051.54 1,684.37 1,392.13 [Goodsintransit:₹117.58(September30,2024:₹13.36,March31,2025:₹186.01, March 31, 2024: ₹229.99; March 31, 2023: ₹142.12)] Work-in-progress 1,315.01 1,180.24 1,211.12 1,140.00 919.56 Finished goods 1,222.48 1,197.98 1,095.98 856.66 841.76 Stores and spares 341.57 161.23 153.49 151.16 135.06 [Goods in transit: ₹ 10.19 (September 30, 2024: Nil, March 31, 2025: ₹7.80, March 31, 2024: ₹9.98; March 31, 2023: ₹2.12)]

Less: Provision for slow moving inventory (521.65) (458.30) (429.44) (291.02) (303.64) 4 ,591.24 4 ,187.14 4,082.69 3,541.17 2,984.87

Note: a. For lien/charge against inventories refer note 37 b.Write-downofinventoriestonetrealizablevalueamountedto₹198.33(September30,2024: ₹185.47,March31,2025:₹152.89,March31,2024:₹103.11,March31,2023:₹127.00).Thesewererecognizedasan expense during the year and included in 'changes in inventories of work-in-progress and finished goods' in the statement of profit and loss.

c. Provision for slow moving inventory includes provision in respect of:

Raw materials (189.61) (219.64) (164.42) (169.55) (135.44) Finished goods (111.01) (128.66) (112.56) (40.78) (58.46) Work-in-progress (148.18) (61.19) (105.67) (41.23) (61.53) Stores and spares (72.85) (48.81) (46.79) (39.46) (48.21) (521.65) (458.30) (429.44) (291.02) (303.64) Note 12 - Contract assets and contract liabilities Non-Current Contract assets 51.02 - - - -

51.02 - - - - Non-Current Contract liabilities Unearned revenue 176.38 194.95 192.92 - -

176.38 194.95 192.92 - - Current Contract assets 26.65 34.26 52.89 24.81 0.58

26.65 34.26 52.89 24.81 0.58 Contract liabilities Advance from customers 53.04 109.54 102.58 79.61 161.56 Unearned revenue 312.70 - 58.14 42.45 3.85 3 65.74 1 09.54 160.72 122.06 165.41

Note:

Revenue recognised that was included in contract liabilities balance as at the beginning of the period: - Sale of goods 80.36 41.60 122.06 165.41 41.96 (This space is intentionally left blank) 429Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) As at September 30, 2025 As at September 30, 2024 As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount Note 13 - Equity share capital Authorised Equity shares of ₹10 each 60,57,29,934 6 ,057.30 43,14,60,000 4,314.60 60,57,29,934 6,057.30 43,14,60,000 4 ,314.60 4 3,14,60,000 4 ,314.60 60,57,29,934 6 ,057.30 43,14,60,000 4,314.60 60,57,29,934 6,057.30 43,14,60,000 4 ,314.60 4 3,14,60,000 4 ,314.60 Issued, subscribed and fully paid up Equity shares of ₹10 each 60,50,01,964 6,050.02 42,47,59,003 4,247.59 58,18,28,940 5,818.29 42,47,59,003 4,247.59 4 2,47,58,026 4,247.58 60,50,01,964 6 ,050.02 42,47,59,003 4,247.59 58,18,28,940 5,818.29 42,47,59,003 4 ,247.59 4 2,47,58,026 4 ,247.58

(i) Reconciliation of the number of shares and amount authorised at the beginning and at the end of the period / year :

As at September 30, 2025 As at September 30, 2024 As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount At the beginning of the period / year 6 0,57,29,934 6 ,057.30 43,14,60,000 4,314.60 43,14,60,000 4,314.60 4 3,14,60,000 4 ,314.60 43,14,60,000 4 ,314.60 Increase during the period / year - - - - 17,42,69,934 1,742.70 - - - - Outstanding at the end of the period / year 6 0,57,29,934 6 ,057.30 43,14,60,000 4,314.60 60,57,29,934 6,057.30 4 3,14,60,000 4 ,314.60 43,14,60,000 4 ,314.60

(ii) Reconciliation of the number of shares and amount outstanding at the beginning and at the end of the reporting period / year:

As at September 30, 2025 As at September 30, 2024 As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount At the beginning of the year / period 5 8,18,28,940 5 ,818.29 4 2,47,59,003 4 ,247.59 4 2,47,59,003 4 ,247.59 4 2,47,58,026 4 ,247.58 3 9,59,58,100 3 ,959.58 Shares issued for cash 2 ,31,73,024 2 31.73 - - - - 9 77 0 .01 1 50 0 .00 Shares allotted through the conversion of Compulsorily Convertible - - - - - - - - 2,87,99,776 2 88.00 Debentures Shares allotted through the conversion of Compulsorily Convertible - - - - 1 5,70,69,937 1 ,570.70 - - - - Preference Shares Outstanding at the end of the year / period 6 0,50,01,964 6 ,050.02 42,47,59,003 4,247.59 58,18,28,940 5,818.29 4 2,47,59,003 4 ,247.59 42,47,58,026 4 ,247.58 During the period ended September 30, 2025, on May 2, 2025, the Company has issued 17,173,024 Equity Shares having a face value of Rs 10 per share on a rights basis to the existing Equity Shareholder(s) of the Company, at a premium of Rs 64.64 per Equity Share (September 30, 2024: Nil; March 31, 2025: Nil; March 31, 2024: 200 equity shares of ₹ 10 each fully paid up at premium of ₹ 12.40 per share and 777 equity shares of ₹ 10 each fully paid up at premium of ₹ 21.56 per share; March 31, 2023:

150 equity shares of ₹ 10 each fully paid up at premium of ₹12.40)).

During the period ended September 30, 2025, the Company has no conversion of equity shares into Compulsorily Convertible Preference Shares (September 30, 2024: Nil; March 31, 2025: 407,115,771 Compulsorily Convertible Preference Shares(CCPS) into 157,069,937; March 31, 2024: Nil, March 31, 2023: Nil). Of the above, 46,818,017 equity shares at premium of INR 19.48 and 110,251,920 equity shares at premium of INR 30.63 (March 31, 2024: Nil, March 31, 2023: Nil) per share.

(iii) Terms and rights attached to equity shares a. The Company has a single class of equity shares. Accordingly, all equity shares rank equally with regard to dividends and share in the Company’s residual assets on winding up. The equity shareholders are entitled to receive dividend as declared from time to time, subject to preferential right of preference shareholders to payment of dividend. The voting rights of an equity shareholder are in proportion to his/its share of the paid-up equity share capital of the Company. Voting rights cannot be exercised in respect of shares on which any call or other sums presently payable has not been paid. Failure to pay any amount called up on shares may lead to their forfeiture. On winding up of the Company, the holders of equity shares will be entitled to receive the residual assets of the Company, remaining after distribution of all preferential amounts, in proportion to the number of equity shares held.

b. The issued, subscribed and, fully paid-up equity share capital includes September 30, 2025: Nil (September 30, 2024:Nil; March 31, 2025: Nil; March 31, 2024: 977.00, March 31, 2023: 150.00) equity shares of ₹ 10 each fully paid up issued to private equity investors who carry certain exit rights as per clause 8 of Shareholders Agreement dated March 24, 2023.

As on September 30, 2025: 1,127 (September 30, 2024: 1,127, March 31, 2025: 1,127 , March 31, 2024: 1,127, March 31, 2023: 1,127) shares are held by these investors.

430Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 13 - Equity share capital (continued)

(iv) Details of shares held by holding/ultimate holding company (i.e., parent of the Group) and/or their subsidiaries/associates Name of the shareholder As at September 30, 2025 As at September 30, 2024 As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount Aequs Manufacturing Investments Private Limited 29,08,08,225 2 ,908.08 27,21,89,936 2,721.90 27,21,89,936 2,721.90 26,38,37,003 2 ,638.37 26,38,37,003 2 ,638.37

(v) Details of share holders holding more than 5% of the aggregate shares in the Parent Company Name of the shareholder As at September 30, 2025 As at September 30, 2024 As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 No. of shares % holding No. of shares % holding No. of shares % holding No. of shares % holding No. of shares % holding Aequs Manufacturing Investments Private Limited 29,08,08,225 48.07% 27,21,89,936 64.08% 27,21,89,936 46.78% 26,38,37,003 62.11% 26,38,37,003 62.11% Melligeri Private Family Foundation 10,17,61,570 16.82% 11,44,31,505 26.94% 10,62,61,570 18.26% 11,44,31,505 26.94% 11,44,31,505 26.94% Amansa Investments Ltd 5,01,32,863 8.29% - - 4,82,35,541 8.29% - - - - 4 4,27,02,658 73.17% 38,66,21,441 91.02% 42,66,87,047 73.33% 3 7,82,68,508 89.05% 37,82,68,508 89.05%

(vi) Details of shareholding of Promoters Name of the Promoter As at September 30, 2025 As at September 30, 2024 No. of shares % of total % of change No. of shares % of total % of change number of during the number of shares during the shares period period Aequs Manufacturing Investments Private Limited 29,08,08,225 48.07% 1.29% 2 7,21,89,936 64.08% 1.97% Melligeri Private Family Foundation 10,17,61,570 16.82% -1.44% 1 1,44,31,505 26.94% 0.00% Aravind Melligeri 10,00,000 0.17% 0.00% 5 ,00,000 0.12% 0.00% Name of the Promoter As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 No. of shares % of total number % of change No. of shares % of total % of change No. of shares % of total % of change of shares during the year number of during the year number of shares during the year shares Aequs Manufacturing Investments Private Limited 27,21,89,936 46.78% -15.33% 26,38,37,003 62.11% 0.00% 26,38,37,003 62.11% 2.33% Melligeri Private Family Foundation 10,62,61,570 18.26% -8.68% 11,44,31,505 26.94% 0.00% 11,44,31,505 26.94% -1.96% Aravind Melligeri 10,00,000 0.17% 0.05% 5,00,000 0.12% 0.00% 5 ,00,000 0.12% 0.00%

(vii)Aggregate number of shares issued for consideration other than cash As at As at As at As at As at September 30, September 30, March 31, March 31, 2024 March 31, 2023 2025 2024 2025 Number of equity shares Shares issued as consideration for acquisition of investments (Refer note below) - - - - 2 ,87,99,776 Shares allotted through the conversion of Compulsorily Convertible Debentures (Refer note (ix) below) - - 1 5,70,69,937 - -

(viii)(a)DuringtheyearendedMarch31,2025theCompanyhasconverted407,115,771.00(March31,2024:Nil,March31,2023:Nil)CompulsorilyConvertiblePreferenceShares(CCPS)into157,069,937(March31,2024:Nil,March31,2023:Nil)equity shares of INR 10.00 each fully paid up. Of the above, 46,818,017 equity shares at premium of INR 19.48 and 110,251,920 equity shares at premium of INR 30.63 (March 31, 2024: Nil, March 31, 2023: Nil) per share.

(viii)(b)DuringtheyearendedMarch31,2025theCompanyissuedNil(March31,2024:Nil,March31,2023:18,961,938)equitysharesof₹10eachfullypaidupatpremiumof₹Nil(March31,2024:Nil,March31,2023:₹18.90)pershareandduringthe yearendedMarch31,2025theCompanyissuedNil(March31,2024:Nil,March31,2023:9,837,838)equitysharesof₹10eachfullypaidupatpremiumof₹Nil (March31,2024:Nil,March31,2023:₹19.60) persharethroughconversionofcompulsorily convertible debenture.

(ix)Therearenoshareswhicharereservedforissuanceandtherearenosecuritiesissued/outstandingwhichareconvertibleintoequityshares,exceptCompulsorilyConvertiblePreferenceSharesfortheyearsendedMarch31,2024andMarch31,2023and ESOP.

431Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 13 - Equity share capital (continued)

(x) Shares reserved for issue under options For details of shares reserved for issue under the employee stock option (ESOP) plan of the Company, refer note 13B ESOPTrustwascreatedforthewelfareandbenefitofemployeesanddirectorsoftheCompany.TheBoardofDirectorshasapprovedtheemployeestockoptionplanoftheCompany.OnOctober25,2013,July25,2016,December15,2021andDecember 22, 2021 the trust purchased 5,500,000, 2,900,000, 3,000,000 and 3,000,000 equity shares respectively of the Company using the proceeds from interest free loan of INR 235.00 obtained from the Company.

(xi) For details of shares reserved for issue under the employee stock option (ESOP) plan of the Company, refer note 13B.

ESOPTrustwascreatedforthewelfareandbenefitofemployeesanddirectorsoftheCompany.TheBoardofDirectorshasapprovedtheemployeestockoptionplanoftheCompany.OnOctober25,2013,July25,2016,December15,2021,December22, 2021, July 8, 2025 and July 14,2025 the trust purchased 5,500,000, 2,900,000, 3,000,000, 3,000,000,3,000,000 and 3,000,000 equity shares respectively of the Company using the proceeds from interest free loan of INR 648.86 obtained from the Company.

(xii) There are no instances of shares allotted as fully paid by way of bonus shares and shares bought back during the period of five years immediately preceding the year end Note 13A - Instruments entirely equity in nature As at September 30, 2025 As at September 30, 2024 As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount Preference share capital Authorised Compulsorily convertible preference shares of ₹10 each - - 40,89,00,000 4,089.00 40,89,00,000 4,089.00 4 0,89,00,000 4 ,089.00 16,00,00,000 1 ,600.00 - - 40,89,00,000 4,089 40,89,00,000 4,089.00 4 0,89,00,000 4 ,089.00 16,00,00,000 1 ,600.00 Issued, subscribed and fully paid up Compulsorily convertible preference shares of ₹10 each - - 40,71,15,771 4,071.16 40,71,15,771 4,071.16 4 0,71,15,771 4 ,071.16 5,72,06,340 5 72.06

Less: Re-classified to borrowing* - - - - - - - - (5,72,06,340) (572.06)

Less: Converted to equity shares - - - - (40,71,15,771) (4,071.16) - - - - - - 40,71,15,771 4,071 - - 4 0,71,15,771 4 ,071 - -

(i) Reconciliation of the number of shares and amount authorised at the beginning and at the end of the period / year :

As at September 30, 2025 As at September 30, 2024 As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount Balance outstanding at the beginning of the period / year - - 40,89,00,000 4,089.00 40,89,00,000 4,089.00 16,00,00,000 1,600.00 - - Increase in preference shares during the period / year - - - - 24,89,00,000 2 ,489 16,00,00,000 1,600.00 Balance outstanding at the end of the period / year - - 40,89,00,000 4,089.00 40,89,00,000 4,089.00 40,89,00,000 4 ,089.00 16,00,00,000 1 ,600.00

(ii) Reconciliation of the number of shares and amount outstanding at the beginning and at the end of the period / year :

As at September 30, 2025 As at September 30, 2024 As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount No. of shares Amount Balance outstanding at the beginning of the year - - 40,71,15,771 4,071.16 40,71,15,771 4,071.16 5 ,72,06,340 5 72.06 - -

Add: Preferential issue during the period / year - - - - - 3 4,99,09,431 3 ,499.10 5,72,06,340 5 72.06 Balance outstanding at the end of the year - - 40,71,15,771 4,071.16 40,71,15,771 4,071.16 4 0,71,15,771 4 ,071.16 5,72,06,340 5 72.06

Less: Re-classified to borrowing* - - - - - - - - 5,72,06,340 5 72.06

Less: Converted to equity shares - - - - (40,71,15,771) (4,071.16) - - - - Balance outstanding at the end of the year - - 40,71,15,771 4,071.16 - - 4 0,71,15,771 4 ,071.16 - - * These Compulsorily Convertible Preference Shares (CCPS) were classified as a liability instrument as at March 31, 2024 as it did not meet the fixed for fixed conversion ratio as of that date. Refer note (iv) below.

432Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 13A - Instruments entirely equity in nature (continued)

(iii) Shareholders holding more than 5 % of the aggregate CCPS in the Company As at September 30, 2025 As at September 30, 2024 Name of Holder No. of CCPS Value of CCPS % holding No. of CCPS Value of CCPS % holding Amicus Capital Private Equity I LLP - - - 5 ,19,66,240 519.66 12.77% Amicus Capital Partners India Fund I - - - 5 2,40,100 52.40 1.29% Amicus Capital Partners India Fund II - - - 6 ,60,07,260 660.07 16.00% Catamaran Ekam AIF - - - 4 ,75,28,416 475.28 11.67% Steadview Capital Mauritius Limited - - - 5 ,25,97,824 525.98 12.92% Sparta Group LLC - - - 4 ,05,57,366 405.57 9.96% Amansa Investments Ltd - - - 1 2,42,07,157 1,242.07 30.51% Others - - - 1 ,90,11,408 190.11 4.67% As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 Name of Holder No. of CCPS Value of CCPS % holding No. of CCPS Value of CCPS % holding No. of CCPS Value of CCPS % holding Amicus Capital Private Equity I LLP - - - 5,19,66,240 519.66 12.77% 5,19,66,240 519.66 90.84% Amicus Capital Partners India Fund I - - - 52,40,100 52.40 1.29% 52,40,100 52.40 9.16% Amicus Capital Partners India Fund II - - - 6,60,07,260 660.07 16.00% - - - Catamaran Ekam AIF - - - 4,75,28,416 475.28 11.67% - - - Steadview Capital Mauritius Limited - - - 5,25,97,824 525.98 12.92% - - - Sparta Group LLC - - - 4,05,57,366 405.57 9.96% - - - Amansa Investments Ltd - - - 12,42,07,157 1,242.07 30.51% - - - Others - - - 1,90,11,408 190.11 4.67% - - - (This space is intentionally left blank) 433Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 13A - Instruments entirely equity in nature (continued)

(iv) Terms and rights attached to Compulsorily Convertible Preference Shares (CCPS) AspertheShareholdersAgreement("SHA")datedMarch24,2023andOctober12,2023theCompanyisrequiredtoprovideanexittoinvestorsbywayofQIPOorthroughasaletofinancialinvestoronorbeforeJanuary31,2026,thefailureofwhichwill providetheinvestortherighttorequiretheCompanyand/orthePromoterstotakereasonableeffortstoprovideanexittoInvestorsinanyothermanner.AsuccessfulQIPOorsaletoafinancialinvestorisnotincontrolofthecompany,henceitdoesnothave unconditional right to defer the settlement of CCPS beyond January 31, 2026. In the SHA entered during the year ended March 31, 2023, it is stated that the Company has no obligation to buy back the investor securities.

AspertheSHA,theConversionratioistobecalculatedbasedonEBITDAoftheCompanyanditsSubsidiariesonaconsolidatedbasisachievedinFY2023-2024(“FY24EBITDA”),computedaspertheformuladefinedinShareholder’sagreement.Sincethe ConversionratiohasbeendeterminedasatMarch31,2025,itmetthecriteriatobeclassifiedasaequityinstrument. Duringthefinancialyear2024-25,theCompanyhadconvertedalloutstandingCompulsorilyConvertiblePreferenceShares(CCPS)into equity shares.

(A) CCPS (Round 1)

(i)AspertheshareholdersagreementdatedMarch24,2023,theCompanyhasissuedfirsttrancheCumulativeCompulsorilyConvertiblePreferenceShares(CCPS)whichareheldbyinvestors(i.e.otherthanpromoters).IfdeclaredbytheBoard,eachholder ofsuchCCPS,shallbeentitledtoreceiveapreferentialcumulativedividendattherateof0.1%perannum.EachCCPSholderwouldbeentitledtoparticipatepari-passuinanycashornon-cashdividendspaidtotheholdersofsharesofallotherclasses,onAs If Converted Basis.

(ii) CCPS is compulsorily convertible into Equity Shares of the Company upon the occurrence of any of the following events:-

(a) Listing of the Equity Shares of the Company under a QIPO (as defined in the SHA) or IPO (as defined in the SHA) (“Public Offering”); or

(b) Expiry of 19 (nineteen) years and 11 (eleven) months from the date of the issuance and allotment.

(iii) The investors are entitled to convert all or part of the CCPS into equity shares any time prior to the expiry of 19 years and 11 months from the date of issuance and allotment or an Initial Public Offering.

(iv)TheinvestorsareentitledtoattendallgeneralmeetingsoftheCompanyandvotethereatalongwiththeShareholders.ThevotingrightsofinvestorsaretodeterminedonanAsIfConvertedBasisdeterminedaspertheapplicableConversionRatioatsuch time.

(v)PertheSHA,theConversionRatioistobecalculatedbasedonEBITDAoftheCompanyanditsSubsidiariesonaconsolidatedbasisachievedinFY2023-2024(“FY24EBITDA”)aspertheformuladefinedinShareholder’sagreement.Sincethe Conversion ratio has been determined as at March 31, 2025, it met the criteria to be classified as a equity instrument. Accordingly, the CCPS has been reclassified from financial liability to “Instrument entirely Equity in nature” in the financial year.

During the financial year 2024-25, the Company has converted all outstanding CCPS into equity shares basis the agreed conversion ratio.

(B) CCPS (Round 2)

(i)AspertheshareholdersagreementdatedOctober12,2023,theCompanyhasfurtherissuedsecondtrancheCumulativeCompulsorilyConvertibleParticipatingPreferenceShares(CCPS)whichareheldbyinvestors(i.e.otherthanpromoters).Ifdeclaredby theBoard,eachholderofsuchCCPS,shallbeentitledtoreceiveapreferentialcumulativedividendattherateof0.1%perannum.EachCCPSholderwouldbeentitledtoparticipatepari-passuinanycashornon-cashdividendspaidtotheholdersofsharesof all other classes, on As If Converted Basis.

(ii) CCPS is compulsorily convertible into Equity Shares of the Company upon the occurrence of any of the following events:-

(a) Listing of the Equity Shares of the Company under a QIPO (as defined in the SHA) or IPO (as defined in the SHA) (“Public Offering”); or

(b) Expiry of 19 (nineteen) years and 11 (eleven) months from the date of the issuance and allotment

(iii) The investors are entitled to convert all or part of the CCPS into equity shares any time prior to the expiry of 19 years and 11 months from the date of issuance and allotment or an Initial Public Offering.

(iv)TheinvestorsareentitledtoattendallgeneralmeetingsoftheCompanyandvotethereatalongwiththeShareholders.ThevotingrightsofinvestorsarebedeterminedonanAsIfConvertedBasisdeterminedaspertheapplicableConversionRatioatsuch time.

(v)AspertheSHA,theConversionRatioistobecalculatedbasedonEBITDAoftheCompanyanditsSubsidiariesonaconsolidatedbasisachievedinFY2023-2024(“FY24EBITDA”)aspertheformuladefinedinShareholder’sagreement.Sincethe Conversion ratio has been determined as at March 31, 2025, it met the criteria to be classified as an equity instrument.

During the financial year 2024-25, the Company has converted all outstanding CCPS into equity shares basis the agreed conversion ratio. (This space is intentionally left blank) 434Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) 13B - Stock option plan The Parent Company grants stock options to the employees of the Parent Company and its operating subsidiaries and other group entities.

DuringtheSixmonthsperiodendedSeptember30,2025,theCompanyhasadoptedthe‘AequsEmployeeStockOptionPlan2025’(‘ESOPPlan2025’)pursuanttotheresolutionpassedbyBoardonMay10,2025,andtheresolutionpassedby theShareholdersonMay13,2025oneemployeestockoptionplans(ESOP)viz.,ESOPscheme2025.ThisESOP2025PlanconsolidatesandreplacesallpriorESOPplans,i.e.,theAequsEmployeeStockOptionPlan,2013,AequsEmployee StockOptionPlan,2016,AequsEmployeeStockOptionPlan,2020andAequsEmployeeStockOptionPlan,2022(hereinaftercollectivelyreferredtoas“PriorESOPSchemes”).AllvestedoptionsunderthePriorESOPPlans,whether exercisedornot,andallunvestedoptions,wereherebytransferredtoESOP2025.ThetotalESOPpoolunderESOP2025is20,400,000options.ESOPschemeisadministeredthroughanESOPtrustcalledas"AequsStockOptionPlanTrust" ('ESOPTrust')thathasbeenconstitutedonMay14,2013.TheobjectoftheESOPTrustistomanageschemesmadeavailableforthebenefitoftheemployees.Vestingundereachoftheseschemesissubjecttosatisfactionoftheprescribed vestingconditionsviz.,continuingemployementof5years,employeeperformanceandcertainperformanceconditions.Thesevestingconditionsvarydependingontheroleandseniorityoftheemployees.Therelevantdetailsoftheschemesand the grants are listed separately below.

The fair value of the employee stock options has been measured using the Black-Scholes formula. The inputs used in the measurement of the fair values at grant date of the equity-settled share-based payment plans are as follows.

30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 Fair value at grant date 47.64-52.20 13.76- 15.38 13.76- 15.38 7 - 12.50 Share price at grant date 105.00 30.60 30.60 22.40 - 28.90 Exercise price 74.64 30.60 30.60 28.90 - 29.60 Expected volatility (weighted‑average) 12.41%- 18.97% 16.38- 17.22% 16.38- 17.22% Not applicable 21.36 - 21.50% Expected life (weighted‑average) (years) 2.50-6.50 8.50-9.50 8.50-9.50 8.24 - 8.75 Expected dividends 0% 0% 0% 0% Risk-free interest rate (based on government securities) 5.82%-6.23% 6.63 - 7.03% 6.63 - 7.03% 7 - 7.2% ESOP Scheme 2025 OnMay10,2025,theBoardofDirectorsapprovedtheequitysettledESOPscheme2025forissueofstockoptionstothekeyemployees,consultantsanddirectorsoftheCompanyanditssubsidiaries,jointventuresandassociates.Accordingto theESOPscheme2025,theindividualsselectedbytheESOPcommitteefromtimetotimewillbeentitledto60,00,000options,subjecttosatisfactionoftheprescribedvestingconditionsviz.,continuingemployementof5years,employee performance and certain performance conditions. The weighted average remaining contractual life is 11.89 years.

The details of activity under the ESOP scheme 2025 are summarised below :

September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Particulars Exercise price Number Weighted Number Weighted Number Weighted Number Weighted Number Weighted range average average average average average exercise exercise exercise exercise exercise price price price price price Options outstanding at beginning of period / year - - - - - - - - - -

Add:

Options transferred from Prior ESOP Schemes during the period / year 10 - 32 1,04,75,580 26.43 - - - - - - - - Options granted during the period / year 10 - 75 24,00,000 74.64 - - - - - - - -

Less:

Options exercised during the period / year 10 - 32 19,66,813 22.11 - - - - - - - - Options forfeited during the period / year 10 - 32 5,94,999 32.33 - - - - - - - - Options outstanding at the end of period / year 10 - 75 1,03,13,768 38.14 - - - - - - - - Option exercisable at the end of period / year 2 2,90,827 - - - - - - - - (This space is intentionally left blank) 435Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) 13B - Stock option plan (continued) ESOP Scheme 2013 OnJuly4,2013,theBoardofDirectorsapprovedtheequitysettledESOPscheme2013forissueofstockoptionstothekeyemployeesanddirectorsoftheCompanyanditssubsidiaries,jointventuresandassociates.AccordingtotheESOP scheme2013,theemployeeselectedbytheESOPcommitteefromtimetotimewillbeentitledto20,000to500,000options,subjecttosatisfactionoftheprescribedvestingconditionsviz.,continuingemployementof5years,employee performanceandcertainperformanceconditions. TheweightedaverageremainingcontractuallifeisSeptember30,2024: 7.32years;March31,2025:8.74years,March31,2024:7.98years;March31,2023:8.94years.Theotherrelevant

terms of the grant are as below:

The details of activity under the ESOP scheme 2013 are summarised below:

September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Particulars Exercise price Number Weighted Number Weighted Number Weighted Number Weighted Number Weighted range average average average average average exercise exercise exercise exercise exercise price price price price price Options outstanding at beginning of period / year 10 - 32 3 1,90,391 22.01 36,71,063 18.83 36,71,063 18.83 38,34,813 18.61 42,43,126 18.83

Add:

Options granted during the period / year 10 - 32 - - - - 5,00,000 30.60 - - - -

Less:

Options exercised during the period / year 10 - 32 - - - - ( 6,77,672) 13.24 - - - - Options forfeited during the period / year 10 - 32 - - (87,500) 15.60 ( 3,03,000) 17.26 ( 1,63,750) 17.58 (4,08,313) 10.00 Options transferred to ESOP scheme 2025 during the period / year 10 - 32 (31,90,391) 22.01 - - - - - - - - Options outstanding at the end of period / year 10 - 32 - - 3 5,83,563 1 8.42 3 1,90,391 22.01 3 6,71,063 18.83 38,34,813 1 8.61 Option exercisable at the end of year - 2 5,43,563 1 7,20,391 2 3,63,563 22,69,544 ESOP Scheme 2016 TheBoardofDirectorsapprovedtheEmployeeShareOptionPlan2016structuredtorewardemployees.Accordingly,theParentCompanyhascreated2,900,000shareoptionpooltobeallocatedandgrantedfromtimetotimetoemployees.As EmployeeStockOptionPlan(ESOP)committeehasbeenformedwithpowersdelegatedfromtheBoardofDirectorstomanagetheESOPscheme,subjecttosatisfactionoftheprescribedvestingconditionsspecifiedinthegrantletterviz., servicecondition,employeeperformanceandcertainperformanceconditions. Theweightedaverageremainingcontractuallifeis period/yearsSeptember30,2025:9.30years,March31,2025:9.16years,March31,2024:9.80years;March 31, 2023 : 10.78 years.

The details of activity under the ESOP scheme 2016 are summarised below :

September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Particulars Exercise price Number Weighted Number Weighted Number Weighted Number Weighted Number Weighted range average average average average average exercise exercise exercise exercise exercise price price price price price Options outstanding at beginning of period / year 24 - 40 2 1,33,367 29.52 1 9,30,414 3 0.29 1 9,30,414 30.29 2 5,42,227 28.24 27,76,852 28.00

Add:

Options granted during the period / year 24 - 40 - - 2 ,00,000 3 6.60 4 ,25,000 36.60 - - - -

Less:

Options exercised during the period / year 24 - 40 - - - - (2,22,047) 26.97 (10,000) 23.78 (7,000) 23.78 Options forfeited during the period / year 24 - 40 - - - - - - (6,01,813) 26.89 (2,27,625) 11.83 Options transferred to ESOP scheme 2025 during the period / year 24 - 40 (21,33,367) 29.52 - - - - - - - - Options outstanding at the end of period / year 24 - 40 - - 2 1,30,414 28.87 2 1,33,367 29.52 1 9,30,414 30.29 25,42,227 28.24 Option exercisable at the end of period / year - 1 2,85,091 1 1,48,368 1 0,65,914 14,15,775 (This space is intentionally left blank) 436Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) 13B - Stock option plan (continued) ESOP Scheme 2020 TheBoardofDirectorsapprovedtheEmployeeShareOptionPlan2020structuredtorewardemployees.Accordingly,theParentCompanyhascreated3,000,000shareoptionpooltobeallocatedandgrantedfromtimetotimetoemployees.As EmployeeStockOptionPlan(ESOP)committeehasbeenformedwithpowersdelegatedfromtheBoardofDirectorstomanagetheESOPscheme,subjecttosatisfactionoftheprescribedvestingconditionsspecifiedinthegrantletterviz., servicecondition,employeeperformanceandcertainperformanceconditions.Theweightedaverageremainingcontractuallifeis period/yearsSeptember30,2024:13.40years;March31,2025:12.88years,March31,2024:12.96years;

March 31, 2023 : 13.98 years.

The details of activity under the ESOP scheme 2020 are summarised below :

September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Particulars Exercise price Number Weighted Number Weighted Number Weighted Number Weighted Number Weighted average average average average average exercise exercise exercise exercise exercise price price price price price Options outstanding at beginning of period / year 26 - 31 2 6,65,000 27.90 17,50,000 26.10 1 7,50,000 26.10 3 0,00,000 26.10 30,00,000 26.10

Add:

Options granted during the period / year 26 - 31 - - 12,15,000 30.60 1 2,15,000 30.60 - - - -

Less:

Options exercised during the period / year 26 - 31 - - - - (1,50,000) 26.10 - - - - Options forfeited during the period / year 26 - 31 - - - - (1,50,000) 30.60 (12,50,000) 26.10 - - Options transferred to ESOP scheme 2025 during the period / year 26 - 31 (26,65,000) 27.90 - - - - - - - - Options outstanding at the end of period / year 26 - 31 - - 29,65,000 27.94 2 6,65,000 27.90 1 7,50,000 26.10 30,00,000 26.10 Option exercisable at the end of period / year - 2 ,93,548 1 ,50,000 1 ,75,000 2,68,548 ESOP Scheme 2022 TheBoardofDirectorsapprovedtheEmployeeShareOptionPlan2022structuredtorewardemployees.Accordingly,theParentCompanyhascreated6,000,000shareoptionpooltobeallocatedandgrantedfromtimetotimetoemployees.As EmployeeStockOptionPlan(ESOP)committeehasbeenformedwithpowersdelegatedfromtheBoardofDirectorstomanagetheESOPscheme,subjecttosatisfactionoftheprescribedvestingconditions specifiedinthegrantletterviz., servicecondition,employeeperformanceandcertainperformanceconditions.Theweightedaverageremainingcontractuallifeis period/yearsSeptember30,2024:13.32years,March31,2025:12.87years,March31,2024:13.10years;

March 31, 2023 : 14.11 years The details of activity under the ESOP scheme 2022 are summarised below :

September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Particulars Exercise price Number Weighted Number Weighted Number Weighted Number Weighted Number Weighted average average average average average exercise exercise exercise exercise exercise price price price price price Options outstanding at beginning of period / year 26 - 31 2 4,86,821 27.89 18,95,000 26.42 1 8,95,000 26.42 2 0,45,000 26.54 18,05,000 26.10

Add:

Options granted during the period / year 26 - 31 - - 9,03,821 30.60 9 ,03,821 30.60 - - 2,75,000 29.35

Less:

Options exercised during the period / year 26 - 31 - - - - ( 1,24,000) 26.10 - - - - Options forfeited during the period / year 26 - 31 - - (75,000) 26.09 ( 1,88,000) 27.27 ( 1,50,000) 28.02 (35,000) 26.10 Options transferred to ESOP scheme 2025 during the period / year 26 - 31 (24,86,821) 27.89 - - - - - - - - Options outstanding at the end of period / year 26 - 31 - - 2 7,23,821 27.82 2 4,86,821 27.89 1 8,95,000 26.42 18,05,000 26.54 Option exercisable at the end of period / year - 3 ,64,000 4,25,000 2,01,500 1,71,290 (This space is intentionally left blank) 437Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 14 - Other equity As at As at As at As at As at September 30, September 30, 2025 March 31, 2025 March 31, 2024 March 31, 2023 2024 Retained earnings (8,471.60) (7,991.52) (8,301.87) (7,274.55) (7,113.55) Securities premium reserve 11,329.88 7,293.77 9,794.22 7,293.77 5,685.86 Share options outstanding account 65.61 71.56 68.91 60.14 49.94 Revaluation reserve - - - - 173.00 Statutory reserve 11.16 11.16 11.16 11.16 11.06 Common control capital reserve 93.94 93.94 93.94 93.94 93.94 Treasury shares (673.07) (265.09) (241.99) (265.09) (265.09) Other reserves 247.88 229.33 263.33 214.92 148.67 Foreign currency translation reserve (599.53) (351.42) (336.80) (287.43) (245.33) 2,004.27 (908.27) 1,350.90 (153.14) (1,461.50) Non Controlling Interest (9.41) (9.41) (9.41) (9.41) (113.56) 1,994.86 (917.68) 1,341.49 (162.55) (1,575.06) Nature and purpose of reserves a. Securities premium SecuritiespremiumisusedtorecordthepremiumonissueofsharesandisutilizedinaccordancewiththeprovisionsoftheAct.Duringtheperiod/yearendedSeptember30,2025,theCompany has utilized Nil (September 30, 2024: Nil, March 31, 2025: ₹Nil, March 31, 2024: ₹179.84, March 31, 2023: ₹2.36) for share issue expenses.

b. Share options outstanding account The share options outstanding account is used to recognise the fair value of options issued to employees under Aequs Stock Option Plan. c. Revaluation reserve Revaluation reserve was created in the prior years to record surplus arising out of revaluation of Property, plant and equipment held by an overseas subsidiary of the Group. This item of property, plant and equipment was re-classifed to Investment property based on change of use during the year ended March 31, 2021. The carrying value of the investment property was considered to be deemed cost of transition to Ind AS and hence the revaluation reserve was transferred to retained earnings.

d. Statutory reserve Statutory reserve represents the reserve that Aequs Aerospace France SAS is maintaining in accordance with the French Commercial Code (the Code). It is not a free reserve and there are certain restrictions with respect to its utilisation under the Code.

e. Common control capital reserve Common controlcapitalreserve represents the reserve created on acquisition of Aequs Engineered Plastics Private Limited (AEPPL) and Aequs Consumer Products Private Limited (ACPPL) under common control approach as per Ind AS 103-Business Combinations. Refer Note 33.

f. Treasury shares This represents own equity shares held by its ESOP Trust, which are recognized at cost and disclosed as a dedcution from equity. g. Foreign currency translation reserve Exchange difference arisingon translation of foreign operations are recognised in other comprehensive income and accumulated in a separate reserve within equity. The cumulative amount is reclassified to profit or loss when the net investment is disposed off.

h. Other reserve Other reserves includes fair value of financial guarantee given by MFRE private trust and Aequs SEZ Private Limited and any other adjustments as may be required under Ind AS.

Note: For movement in reserves, please refer 'Statement of changes in equity'. (This space is intentionally left blank) 438Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 14 - Other equity (continued) As at As at As at As at As at September 30, September 30, 2025 March 31, 2025 March 31, 2024 March 31, 2023 2024 A. Reserves and surplus

(i) Retained earnings Opening Balance (8,301.87) (7,274.55) (7,274.55) (7,113.55) (6,139.86) Net profit/(loss) for the period / year (169.77) (717.00) (1,023.46) (108.38) (988.26) Transfer from revaluation reserve - - 173.00 - Non-controlling interest movement - - (238.00) - Transfer of reserve relating to lapse of vested option - - 10.00 2.40

Items of other comprehensive income recognised directly in retained earnings: - Share of Other comprehensive income (OCI) of associates and joint ventures - - - (0.56) - Remeasurement of post employment benefit obligations 0.04 0.03 (3.86) 2.38 12.73 Closing balance (8,471.60) (7,991.52) (8,301.87) (7,274.55) (7,113.55) * Represents translation adjustment relating to Aequs Aerospace France SAS arising on account of adjustments to the historical exchange rate.

(ii) Securities premium reserve Opening balance 9,794.22 7,293.77 7,293.77 5,685.86 5,137.02

Add: Premium received during the period / year 1,497.90 2,500.45 1,787.55 551.20

Less: Utilisation towards share issue expenses - - (179.64) (2.36)

Add: Share options exercised 37.76 - - - - Closing balance 11,329.88 7,293.77 9,794.22 7,293.77 5,685.86

(iii) Share options outstanding account Opening balance 68.91 60.14 60.14 49.94 30.17 Employee stock option expense 10.25 11.42 8.77 19.83 22.01 Transfer relating to lapse of vested option to Retained Earnings - - - (9.63) (2.24) Share options exercised ( 13.55) Closing balance 65.61 71.56 68.91 60.14 49.94

(iv) Revaluation reserve Opening balance - - - 173.00 173.00 Reversal of net carrying value of investment property - - - - - Transfer to reserves - - - (173.00) - Closing balance - - - - 173.00

(v) Statutory reserve Opening balance 11.16 11.16 11.16 11.06 11.06 Movement for the period / year - - - 0.10 - Closing balance 11.16 11.16 11.16 11.16 11.06

(vi) Common control capital reserve Opening balance 93.94 93.94 93.94 93.94 93.94 Movement for the period / year - - - - - Closing balance 93.94 93.94 93.94 93.94 93.94

(vii) Treasury shares Opening balance (241.99) (265.09) (265.09) (265.09) (265.09) Issue of shares to Aequs Stock Option Plan Trust (447.84) - - - - Share options exercised 16.76 - 23.10 - - Closing balance (673.07) (265.09) (241.99) (265.09) (265.09)

(viii) Other reserves Opening balance 263.33 214.92 214.92 148.67 95.21 Financial guarantee received during the period / year ( 15.45) 14.41 48.41 66.25 53.46 Closing balance 247.88 229.33 263.33 214.92 148.67 Total reserves and surplus (i + ii + iii + iv + v + vi + vii + viii) 2,603.80 (556.85) 1,687.70 134.29 (1,216.17) B. Items of other comprehensive income

(ix) Foreign currency translation reserve Opening balance (336.80) (287.43) (287.43) (245.33) (178.95) Foreign currency translation reserve for the period / year ( 262.73) ( 63.99) (49.37) (42.10) (66.38) Closing balance (599.53) (351.42) (336.80) (287.43) (245.33) Total other comprehensive income (ix) (599.53) (351.42) (336.80) (287.43) (245.33) 439Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 14 - Other equity (continued) As at As at As at As at As at September 30, September 30, 2025 March 31, 2025 March 31, 2024 March 31, 2023 2024 C. Non Controlling Interest Opening balance (9.41) (9.41) (9.41) (113.56) (2.48) Movement for the period / year - 0.00 - 104.15 (111.08) Closing balance (9.41) (9.41) (9.41) (9.41) (113.56) Total other equity including Non Controlling Interest (A + B + C) 1,994.86 (917.68) 1,341.49 (162.55) (1,575.06) (This space is intentionally left blank) 440Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Non-current:

Term loans from banks (secured) Rupee loan 2 ,722.30 1,422.63 1,803.89 959.67 705.97 Foreign currency loan (USD) 1 0.80 20.86 15.10 26.71 153.50 Foreign currency loan (Euro) 6 1.72 79.14 67.18 87.53 118.40 Compulsorily Convertible Preference Shares (CCPS) (refer note 13A) - - - - 575.39 2 ,794.82 1,522.63 1,886.17 1 ,073.91 1,553.26

Less: Current maturities of long-term borrowings 7 10.11 302.82 453.18 211.05 290.98

Less: Interest accrued but not due on borrowings 1 0.79 5.63 8.60 7.78 9 .11 2 ,073.92 1,214.18 1,424.39 855.08 1,253.17

Current:

Working capital facilities from banks (secured) 2,051.16 1,906.59 1,978.71 1,572.70 1,715.11 Working capital - others (secured) 153.07 133.91 200.36 - - Loans from related parties (unsecured) 283.16 267.13 272.71 264.08 188.46 Current maturities of term long-term borrowings 710.11 302.82 453.18 211.05 290.98 Interest accrued but not due on borrowings 63.69 23.23 41.27 15.90 13.67 3,261.19 2,633.68 2,946.23 2,063.73 2,208.22

Notes:

(a) As at September 30, 2025

(A) Term loans Aequs Engineered Plastics Private Limited (AEPPL) INR loan from banks

(i)TheECLGSrupeeloanconsistsofWorkingCapitalTermLoan(WCTL)frombankwithoutstandingbalanceof₹NilasonSeptember30,2025.ThecarryinginterestatREPORateplus3.90%p.a.Theloanissecuredbyextensionofhypothecation ofentireprimarysecurityavailableforexistingSecurities,Collateral:ExtensionofSecondChargeonexistingsecuritysituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanhas 100%guaranteefromNationalCreditGuaranteeTrusteeCompanyLimited(NCGTC).Thetermloanisrepayablein36monthlyinstalmentspostmoratoriumperiodof12monthsfromthedateofdisbursementoftheloani.e.September21,2020, making the total term of the loan 48 months. This loan facility was closed during the current period.

(ii)TheECLGSrupeeloanconsistsof WCTLfrombankwithoutstandingbalanceof₹16.51asonSeptember30,2025,carryinginterestatREPORateplus4%p.a.(Capped@9.25%)Theloanissecuredbyextensionofhypothecationofentire primarysecurityavailable forexistingSecurities,Collateral:ExtensionofSecondChargeonexistingsecuritysituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanhas100% guarantee from NCGTC. The term loan is repayable in 36 monthly instalments post moratorium period of 24 months from the date of disbursement of the loan, making the total term of the loan 60 months.

Foreign currency loan from banks Asecuredforeigncurrencyloanfrombankwithoutstandingbalance₹Nil(March31,2025:₹4.89),carryinginterestat6MSOFR+300 basispointsp.a.TheloanissecuredbyhypothecationofentirePPEacquiredortobeacquiredoutofbank financeinthenameoftheCompany.CollateralsecurityincludesregisteredequitablemortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanisalsosecured by the corporate guarantee by Aequs SEZ Private Limited. The term loan is repayable in 73 monthly instalments.This loan facility was closed during the current period.

Aerostructures Manufacturing India Private Limited (ASMIPL)

1)HDFCBank:TermloantakenbytheCompanycarriesaninterestat1YRSMCLR+1.35%p.a.andisrepayablein60monthlyinstalmentsandissecuredbyhypothecationofplant&machinery,collateralsecurityover parcelofland&building ownedby M/s.MFREPrivateTrust, thepersonalguaranteeofMr.Aravind SMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbytheParentCompany(restrictedtotheextentof ₹600.00)and&M/s.MFREPrivateTrusttotheextentofvalueofthepropertywhichisprovidedascollateral.TheoutstandingbalanceoftheloanasonSeptember30,2025is₹Nil.Anamountof₹5.70hasbeenhasbeenadjustedagainstthisloan on account of unamortised financial guarantee expense and unamortised loan processing fees.

2)HDFCBank:TermloantakenbytheCompanycarriesaninterestat3MTBILL+2.2.%p.a.andisrepayablein60monthlyinstalmentsandissecuredbyhypothecationofrawmaterial,semi-finishedgoods,finishedgoods,existingandfuture receivables(excludingreceivablesfromrelatedparties)andothercurrentassets.Collateralsecurityincludes,parceloflandownedbyAequsSEZPrivateLimited('ASEZ')andhypothecationchargesonunencumberedplantandmachineriesandother fixed assets of the Company and personal guarantee given by Mr. Aravind S Melligeri, Executive Chairman and Chief Executive Officer of the Parent Company. The outstanding balance of the loan as on September 30, 2025 is ₹22.93.

3)AxisBank:TermloantakenbytheCompanycarriesaninterestatREPO+3.40% p.a.andisrepayablein60monthlyinstalmentsandissecuredHypothecationonentirePlantandMachineryPurchasedoutofTermLoanoftheborrower,bothpresent and future.The outstanding balance of the loan as on September 30, 2025 is ₹ 136.21.

4)HDFCBank:ECLGSLoantakenbytheCompanycarriesaninterestat1YRSMCLR+1.35%p.a. andisrepayablein60monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyextensionofsecondchargeoverPrimaryand secondary securities Including Mortgage Created in favour of bank. ECLGS Loan is 100% guaranteed by NCGTC+C11 ( Ministry of Finance, Government of India). The outstanding balance of the loan as on September 30, 2025 is ₹20.75.

5)AxisBank:ECLGSLoantakenbytheCompanycarriesaninterestatREPO+4.85%p.a.(cappedat9.25%)andisrepayablein48monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyhypothecationofplant&machinery, collateralsecurityover parceloflandownedbyAequsSEZPvtLtd(restrictedtothevalueoftheland),ECLGSLoanis100%guaranteedbyNCGTC(MinistryofFinance,GovernmentofIndia).Theoutstandingbalanceoftheloanasonason September 30, 2025 is ₹5.28.

6)AxisBank:ECLGSLoantakenbytheCompanycarriesaninterestatREPO+4.85%p.a.(cappedat9.25%)andisrepayablein48monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyhypothecationonentirecurrentassets of the borrower both present and future, ECLGS Loan is 100% guaranteed by NCGTC ( Ministry of Finance, Government of India). The outstanding balance of the loan as on September 30, 2025 is ₹26.52.

7)Oxyzo:TermloantakenbytheCompanycarriesaninterestatFloating@12.4%(14.8%(OBLR)-2.4%(Discount)) p.a.andisrepayablein5QuaterlyinstalmentsandissecuredHypothecationonentirePlantandMachineryofAequsToysPrivate Limited,bothpresentandfuture,Securitycheque/s,NACHMandate,LienforanamountofRs.5,00,00,000/-(RupeesFiveCroreOnly)infavourofOXYZOFinancialServicesLimitedandAdemandpromissorynoteandaletterofcontinuity.The outstanding balance of the loan as on September 30, 2025 is ₹ 250.00.

Aequs Limited (formerly known as Aequs Private Limited) (AL) GuaranteedEmergencyCreditLineintheformofIndianrupeeTermLoanfrombankcarriesinterestat8.25%+Spread,i.e.9.25%asonSeptember30,2024 p.a.andrepayablein36monthlyinstalmentsafteramoratoriumof12months.Loanis securedbyanextensionofsecondrankingchargeoverexistingprimary&collateralsecuritiesincludingmortgagescreatedinfavouroftheBank,personalguaranteeofMr.AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficerofthe Parent Company and corporate guarantee given by Aequs SEZ Private Limited. The outstanding balance of the loan as on September 30, 2025 is ₹Nil.

Aequs Aero Machine Inc. ('AAM') AAMhasobtainedforeigncurrencyloansinUSDatinterestratesrangingfrom4.73%to6.18%perannum.TheseloansaretakenfromU.S.BankEquipmentFinanceandNewLaneFinance,arerepayableover60to84monthlyinstallmentsfromthe date of disbursement. They are secured by the respective machinery for which the loans were sanctioned. As of September 30, 2025, the outstanding loan amount is ₹ 10.79 million.

(This space is intentionally left blank) 441Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(a) As at September 30, 2025 (continued)

(A) Term loans- (continued) Aequs Aerospace France SAS (AAF Corp) ForeigncurrencyloanstakenbyAAFCorpinEuroscarryinterestratesfrom2.03%to2.25%p.a.Theloansarerepayableover5to7years.LoanfromBPIFrance,HSBCandCreditCooperatifisguaranteedfor80%bytheNationalGuaranteeFund of the High Balance Sheet Enhancement Loans, and loans from Codefi and Region are loans without Guarantee. Loan outstanding as at September 30, 2025 is ₹ 61.72 million.

Foreign currency loan from banks Aequs Engineered Plastics Private Limited (AEPPL) Asecuredforeigncurrencyloanfrombankwithoutstandingbalance₹0.00asonSeptember30,2025,carryinginterestat6MSOFR+300 basispointsp.a.TheloanissecuredbyhypothecationofentirePPEacquiredortobeacquiredoutofbank financeinthenameoftheCompany.CollateralsecurityincludesregisteredequitablemortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanisalsosecured by the corporate guarantee by Aequs SEZ Private Limited. The term loan is repayable in 73 monthly instalments.This loan facility was closed during the current period.

Aequs Consumer Products Private Limited (ACPPL)

(a)HDFCBank:TermloantakenbytheCompanycarriesaninterestat1YRSMCLR+2.50% p.aandisrepayablein60monthlyinstalments(includingcurrentmortariumperiodof9months)andissecuredbyhypothecationofplant&machinery, collateralsecurityoverparcelofland&buildingownedbyM/s.MFREPrivateTrust,thepersonalguaranteeofMr.AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/s.

MFRE Private Trust. An amount of Nil has been adjusted against the loan on account of unamortized loan processing charges. This loan facility was closed during the current period.

(b)CanaraBank: TermloantakenbytheCompanycarriesaninterestat-PresentRLLR8.30%+3%CRPoverRLLR+0.8%Liquiditypremiumandisrepayablein8years6monthsmonthlyinstalments(Includingrepaymentholidayperiodof18 months)andissecuredbyhypothecationofplant&machinery/equipment,miscellaneousAssetsandelectricalinstallation,collateralsecurityover parcelofland&buildingownedbyM/sAequsSEZprivatelimited, thepersonalguaranteeofMr.

Aravind S Melligeri, Executive Chairman and Chief Executive Officer of the Parent Company and corporate guarantee given by M/S Aequs SEZ Private Limited and the Parent Company. This term loan facility closed during the current period.

(c)HDFCBank:TermloanofSanctionamountof₹2000milliontakenbytheCompanyandOutstandingamountasonSeptember30,2025of₹1,495.94Millioncarriesaninterest8.95%p.a.(linkedtoT-bill3months).andisrepayableinRTL:Door toDoortenorof[78months]fromthedateoffirstdisbursement,moratoriumperiodof[18months]andrepaymentperiodof[21quarterlyrepayments],commencingfromMarch'2025andendinginMarch'2030.andissecuredbyhypothecationofplant &machinery,collateralsecurityover parcelofland&buildingownedby M/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral),thepersonalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChief ExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral)andM/StheParentCompany.Anamountof₹10.45hasbeenadjustedagainsttheloan on account of unamortized loan processing charges.

(d)KarnatakaBank: TermloanofSanctionamountof₹983.74milliontakenbytheCompanyandOutstandingamountasonSeptember30,2025 of₹735.16Millioncarriesaninterestat6MT-bill+2.77% p.aandisrepayableinRTL:Doorto Doortenorof[78months]fromthedateoffirstdisbursement,moratoriurnperiodof[18months]andrepaymentperiodof[21quarterlyrepayments],commencingfromMarch'2025andendinginMarch'2030andissecuredbyhypothecationofplant& machinery,collateralsecurityover parcelofland&buildingownedbyM/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral),thepersonalguaranteeofMr.AravindSMelligeri,ExecutiveChairmanandChief ExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral)andM/StheParentCompany.Anamountof₹2.16hasbeenadjustedagainsttheloan on account of unamortized loan processing charges.

(B) Current Borrowings (Working capital) Aequs Engineered Plastics Private Limited (AEPPL) WorkingcapitalfacilitiesincludesCashCredit,ExportPackingCredit(EPC)andPackingCreditinForeignCurrency(PCFC).Workingcapitalfacilitiesareprimarilysecuredbypresentandfuturehypothecationofentirestocksofrawmaterial,stock inprocess,finishedgoods,sparesandreceivablesandothercurrentassets.CollateralsecurityincludesregisteredmortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivate Limited.TheloanisalsosecuredbythecorporateguaranteebyAequsSEZPrivateLimited.CCandEPCcarriesaninterestofREPO+3.90%p.a.whilePCFCcarriesaninterestof6mSOFR+300bps.LoanoutstandingasatSeptember30,2025 towards Cash Credit and EPC facilities are ₹ 61.08 million and ₹ 29.95 respectively.

Aequs Limited (formerly known as Aequs Private Limited)(AL) WorkingcapitalfacilitiesincludesCashCredit,ExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC).Workingcapitalfacilitiesaresecuredprimarilybyhypothecationofstockmeantforexportandbookdebts;further collaterallysecuredbychargeonexistingunincumberedplantandmachineryandparceloflandownedbyAequsSEZPrivateLimited,corporateguaranteeprovidedbyAequsSEZPrivateLimitedandpersonalguaranteeprovidedbyMr.AravindS Melligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompany.Workingcapitalfacilitiesarerepayableondemand.CCcarryinterestratesof RepoRate1month+Spread2.75%,PCFCcarriesaninterestof TermSOFR+200 bps. Loan outstanding as at September 30, 2025 towards cash credit, EPC and PCFC facilities are ₹ 90.10 million , ₹ nil and ₹ 148.15 million respectively.

Aerostructures Manufacturing India Private Limited (ASMIPL) WorkingcapitalfacilitiestakenbytheCompanyincludesExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC)andCashCredit(CC).Workingcapitalfacilitiesaresecuredbyhypothecationofrawmaterial,semi-finished goods,finishedgoods,existingandfuturereceivables(excludingreceivablesfromrelatedparties)andothercurrentassets.Collateralsecurityincludes,parceloflandownedbyAequsSEZPrivateLimitedandhypothecationchargesonunencumbered plantandmachineriesandotherfixedassetsoftheCompany.ThefacilitiesarealsosecuredbypersonalguaranteegivenbyMr.AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguarantee givenbyAL,ASEZandMFRETrust.CCandPCFC,availedfromHDFCBankcarriesaninterestofRepoRate3months+Spread2.70%andTermSOFR+200bps,respectivelyandavailedfromAxisBankcarriesaninterestofReporate+spread

3.50%and1yearSOFR+190bps,respectively.LoanoutstandingasatSeptember30,2025towardsCCandPCFCfacilitiesavailedfromHDFCBankare₹26.69millionand₹765.99million,respectivelyandavailedfromAxisBankare₹70.78 million and ₹ 783.31 million, respectively.

Aerostructures Assemblies India Private Limited (AAI)

(i) As at the period end, the Company has a total sanction limit of ₹150.00 which is split between fund based limit of ₹130.00 and non-fund based limit of ₹20.00.

(ii)WorkingcapitalfacilitytakenbycompanyfromHDFCBankcarriesinterestrateofRepoRate3months+Spread2.50%p.a.Workingcapitalfacilitiesarerepayableondemandandarerenewableonyearlybasis.LoanoutstandingasatSeptember 30, 2025 is ₹ 74.58 million.

(iii)Workingcapitalfacilitiestakenaresecuredprimarilybyhypothecationofstockandbookdebts;furthercollaterallysecuredbychargeonexistingplantandmachineryandmovableassetsandcorporateguaranteegivenbytheshareholdertheParent Company.

(iv) The working capital loan is reduced by Ind AS adjustments for unamortised financial guarantee received amounting to ₹0.54.

Aequs Force Consumer Products Private Limited (AFCPPL)

(a)Working capital facilities availed during the year by the Company are repayable on demand and include Export Packing Credit (EPC) and Pre-shipment Credit in Foreign Currency (PCFC) and Cash Credit (CC). Working capital facilities are secured by hypothecation of inventories, existing and future receivables and other current assets and exclusive charge on plant and machineries of the Company with interest T-Bill 3 Months 6.87% + Spread 3.97% . The loan is also secured by a Corporate guarantee provided by the Parent Company. Loan outstanding as at September 30, 2025 is Nil Aequs Consumer Products Private Limited (ACPPL)

(a)WorkingcapitalfacilitiestakenbytheCompanyfromHDFCbankincludesLetterofCreditandCashCredit(CC).Workingcapitalfacilitiesaresecuredbyhypothecationofrawmaterial,semi-finishedgoods,finishedgoods,existingandfuture receivables.Collateralsecurityincludes,parceloflandandbuildingownedbyM/s.MFREPrivateTrustandhypothecationchargesonunencumberedplantandmachineriesandotherfixedassetsoftheCompany. PersonalguaranteegivenbyMr.

Aravind S Melligeri, Executive Chairman and Chief Executive Officer of the Parent Company. CC carries interest @ 3T-Bill 3 Months 7.03% + Spread 4.01% p.a. This facility has been closed during the current period.

Aequs Aerospace France SAS ('AAF Corp')

(a) Working capital facility comprises of factoring arrangements amounting to INR 153.07 million as at September 30, 2025 taken on a recourse basis. (This space is intentionally left blank) 442Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(a) As at September 30, 2025 (continued)

(C) Loan from related parties Aequs Aerospace LLC (AALLC), USA Loan taken from Melligeri Investment LLC(MILLC) amounting to INR 16.95 million carries interest rate of 13%p.a and is repayable on demand.

Aequs Aerospace BV (AABV) Loan taken from Aequs Manufacturing Investments Private Limited (AMIPL) amounting to USD 3 million (INR 266.16 million) carrying an interest rate of 13% p.a. and is repayable on demand.

(D) Details of Quarterly statements of current assets filed by the company with the bank and reconciliation with books of account for the period ended September 30, 2025:

Quarter Name of bank Particulars of Amount as reported Amount as per Amount of difference Reason for Securities Provided in the quarterly books of account discrepancies return/ statements (net of provision) Jun-25 Various Banks Inventories 3 ,432.52 3 ,402.00 ( 30.52) Refer below note Sep-25 Various Banks Inventories 3 ,650.56 3 ,651.28 0 .72

Note:

Adjustment entries representing provisions for slow moving and obsolete inventories and inventorisation of overheads made after submission of the statement.

Quarter Name of bank Particulars of Amount as reported Amount as per Amount of difference Reason for Securities Provided in the quarterly books of account discrepancies return/ statements (net of provision) Jun-25 Various Banks Trade receivables 1 ,301.00 1 ,704.81 4 03.81 Refer below note Sep-25 Various Banks Trade receivables 1 ,421.14 1 ,961.18 5 40.04

Note:

The amount as per quarterly statements excludes receivables from related party and adjustment entries representing Loss allowance for receivables, adjustment of customer advances after submission of the Statement.

(b) As at September 30, 2024

(A) Term loans Aequs Engineered Plastics Private Limited (AEPPL) INR loan from banks

(i)TheECLGSrupeeloanconsistsofWorkingCapitalTermLoan(WCTL)frombankwithoutstandingbalanceof₹NilasonSeptember30,2024.ThecarryinginterestatREPORateplus3.90%p.a.Theloanissecuredbyextensionofhypothecation ofentireprimarysecurityavailableforexistingSecurities,Collateral:ExtensionofSecondChargeonexistingsecuritysituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanhas 100%guaranteefromNationalCreditGuaranteeTrusteeCompanyLimited(NCGTC).Thetermloanisrepayablein36monthlyinstalmentspostmoratoriumperiodof12monthsfromthedateofdisbursementoftheloani.e.September21,2020, making the total term of the loan 48 months. This loan facility was closed during the period.

(ii)TheECLGSrupeeloanconsistsof WCTLfrombankwithoutstandingbalanceof₹27.50asonSeptember30,2024,carryinginterestatREPORateplus4%p.a.(Capped@9.25%)Theloanissecuredbyextensionofhypothecationofentire primarysecurityavailable forexistingSecurities,Collateral:ExtensionofSecondChargeonexistingsecuritysituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanhas100% guarantee from NCGTC. The term loan is repayable in 36 monthly instalments post moratorium period of 24 months from the date of disbursement of the loan, making the total term of the loan 60 months.

Aerostructures Manufacturing India Private Limited (ASMIPL)

1)HDFCBank:TermloantakenbytheCompanycarriesaninterestat1YRSMCLR+1.35%p.a.andisrepayablein60monthlyinstalmentsandissecuredbyhypothecationofplant&machinery,collateralsecurityover parcelofland&building ownedby M/s.MFREPrivateTrust, thepersonalguaranteeofMr.Aravind SMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbytheParentCompany(restrictedtotheextentof ₹600.00)and&M/s.MFREPrivateTrusttotheextentofvalueofthepropertywhichisprovidedascollateral.TheoutstandingbalanceoftheloanasonSeptember30,2024is₹8.33.Anamountof₹1.03hasbeenhasbeenadjustedagainstthisloan on account of unamortised financial guarantee expense and unamortised loan processing fees.

2)HDFCBank:TermloantakenbytheCompanycarriesaninterestat3MTBILL+2.2.%p.a.andisrepayablein60monthlyinstalmentsandissecuredbyhypothecationofrawmaterial,semi-finishedgoods,finishedgoods,existingandfuture receivables(excludingreceivablesfromrelatedparties)andothercurrentassets.Collateralsecurityincludes,parceloflandownedbyAequsSEZPrivateLimited('ASEZ')andhypothecationchargesonunencumberedplantandmachineriesandother fixed assets of the Company and personal guarantee given by Mr. Aravind S Melligeri, Executive Chairman and Chief Executive Officer of the Parent Company. The outstanding balance of the loan as on September 30, 2024 is ₹ 30.80.

3)AxisBank:TermloantakenbytheCompanycarriesaninterestatREPO+3.40% p.a.andisrepayablein60monthlyinstalmentsandissecuredHypothecationonentirePlantandMachineryPurchasedoutofTermLoanoftheborrower,bothpresent and future.The outstanding balance of the loan as on September 30, 2024 is ₹ 35.01.

4)HDFCBank:ECLGSLoantakenbytheCompanycarriesaninterestat1YRSMCLR+1.35%p.a. andisrepayablein60monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyextensionofsecondchargeoverPrimaryand secondary securities Including Mortgage Created in favour of bank. ECLGS Loan is 100% guaranteed by NCGTC+C11 ( Ministry of Finance, Government of India). The outstanding balance of the loan as on September 30, 2024 is ₹ 62.25.

5)AxisBank:ECLGSLoantakenbytheCompanycarriesaninterestatREPO+4.85%p.a.(cappedat9.25%)andisrepayablein48monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyhypothecationofplant&machinery, collateralsecurityover parceloflandownedbyAequsSEZPvtLtd(restrictedtothevalueoftheland),ECLGSLoanis100%guaranteedbyNCGTC(MinistryofFinance,GovernmentofIndia).Theoutstandingbalanceoftheloanasonason September 30, 2024 is ₹ 36.97.

6)AxisBank:ECLGSLoantakenbytheCompanycarriesaninterestatREPO+4.85%p.a.(cappedat9.25%)andisrepayablein48monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyhypothecationonentirecurrentassets of the borrower both present and future, ECLGS Loan is 100% guaranteed by NCGTC ( Ministry of Finance, Government of India). The outstanding balance of the loan as on September 30, 2024 is ₹ 66.29.

(A) Term loans Aequs Limited (formerly known as Aequs Private Limited) (AL) GuaranteedEmergencyCreditLineintheformofIndianrupeeTermLoanfrombankcarriesinterestat8.25%+Spread,i.e.9.25%asonSeptember30,2024 p.a.andrepayablein36monthlyinstalmentsafteramoratoriumof12months.Loanis securedbyanextensionofsecondrankingchargeoverexistingprimary&collateralsecuritiesincludingmortgagescreatedinfavouroftheBank,personalguaranteeofMr.AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficerofthe Parent Company and corporate guarantee given by Aequs SEZ Private Limited. The outstanding balance of the loan as on September 30, 2024 is ₹1.49.

Aequs Aero Machine Inc. ('AAM') AAMhasobtainedforeigncurrencyloansinUSDatinterestratesrangingfrom4.73%to6.18%perannum.TheseloansaretakenfromENGsCommercialFinance,U.S.BankEquipmentFinance,andNewLaneFinance,arerepayableover60to84 monthly installments from the date of disbursement. They are secured by the respective machinery for which the loans were sanctioned. As of September 30, 2024, the outstanding loan amount is ₹ 20.86 million.

Aequs Aerospace France SAS (AAF Corp) ForeigncurrencyloanstakenbyAAFCorpinEuroscarryinterestratesfrom2.03%to2.25%p.a.Theloansarerepayableover5to7years.LoanfromBPIFrance,HSBCandCreditCooperatifisguaranteedfor80%bytheNationalGuaranteeFund of the High Balance Sheet Enhancement Loans, and loans from Codefi and Region are loans without Guarantee. Loan outstanding as at September 30, 2024 is ₹ 79.14 million.

Foreign currency loan from banks Aequs Engineered Plastics Private Limited (AEPPL) Asecuredforeigncurrencyloanfrombankwithoutstandingbalance₹0.00asonSeptember30,2024,carryinginterestat6MSOFR+300 basispointsp.a.TheloanissecuredbyhypothecationofentirePPEacquiredortobeacquiredoutofbank financeinthenameoftheCompany.CollateralsecurityincludesregisteredequitablemortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanisalsosecured by the corporate guarantee by Aequs SEZ Private Limited. The term loan is repayable in 73 monthly instalments.This loan facility was closed during the current period.

(This space is intentionally left blank) 443Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(b) As at September 30, 2024(continued)

(A) Term loans(continued) Aequs Consumer Products Private Limited (ACPPL)

(a)HDFCBank:TermloantakenbytheCompanycarriesaninterestat1YRSMCLR+2.50% p.aandisrepayablein60monthlyinstalments(includingcurrentmortariumperiodof9months)andissecuredbyhypothecationofplant&machinery, collateralsecurityoverparcelofland&buildingownedbyM/s.MFREPrivateTrust,thepersonalguaranteeofMr.AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/s.

MFRE Private Trust. An amount of Nil has been adjusted against the loan on account of unamortized loan processing charges. This loan facility was closed during the current period.

(b)HDFCBank:TermloanofSanctionamountof₹2000milliontakenbytheCompanyandOutstandingamountasonSeptember30,2024of₹787.45Millioncarriesaninterest8.95%p.a.(linkedtoT-bill3months).andisrepayableinRTL:Door toDoortenorof[78months]fromthedateoffirstdisbursement,moratoriumperiodof[18months]andrepaymentperiodof[21quarterlyrepayments],commencingfromMarch'2025andendinginMarch'2030.andissecuredbyhypothecationofplant &machinery,collateralsecurityover parcelofland&buildingownedby M/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral),thepersonalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChief ExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral)andM/StheParentCompany.Anamountof₹10.46hasbeenadjustedagainsttheloan on account of unamortized loan processing charges.

(c)KarnatakaBank:TermloanofSanctionamountof₹983.74milliontakenbytheCompanyandOutstandingamountasonSeptember30,2024of₹378.66Millioncarriesaninterestat6MT-bill+2.77%p.aandisrepayableinRTL:DoortoDoor tenorof[78months]fromthedateoffirstdisbursement,moratoriurnperiodof[18months]andrepaymentperiodof[21quarterlyrepayments],commencingfromMarch'2025andendinginMarch'2030andissecuredbyhypothecationofplant& machinery,collateralsecurityover parcelofland&buildingownedbyM/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral),thepersonalguaranteeofMr.AravindSMelligeri,ExecutiveChairmanandChief ExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral)andM/StheParentCompany.Anamountof₹2.17hasbeenadjustedagainsttheloan on account of unamortized loan processing charges.

(d) The term loans are reduced by Ind AS adjustments for unamortised financial guarantee received amounting to ₹ Nil, unamortised transaction cost (loan processing charges) received amounting to ₹12.62.

(B) Current Borrowings (Working capital) Aequs Engineered Plastics Private Limited (AEPPL) WorkingcapitalfacilitiesincludesCashCredit,ExportPackingCredit(EPC)andPackingCreditinForeignCurrency(PCFC).Workingcapitalfacilitiesareprimarilysecuredbypresentandfuturehypothecationofentirestocksofrawmaterial,stock inprocess,finishedgoods,sparesandreceivablesandothercurrentassets.CollateralsecurityincludesregisteredmortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivate Limited.TheloanisalsosecuredbythecorporateguaranteebyAequsSEZPrivateLimited.CCandEPCcarriesaninterestofREPO+4.85%p.a.whilePCFCcarriesaninterestof6mSOFR+200bps.LoanoutstandingasatSeptember30,2024 towards Cash Credit and EPC facilities are ₹ 138.33 million and Nil respectively.

Aequs Limited (formerly known as Aequs Private Limited)(AL) WorkingcapitalfacilitiesincludesCashCredit,ExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC).Workingcapitalfacilitiesaresecuredprimarilybyhypothecationofstockmeantforexportandbookdebts;further collaterallysecuredbychargeonexistingunincumberedplantandmachineryandparceloflandownedbyAequsSEZPrivateLimited,corporateguaranteeprovidedbyAequsSEZPrivateLimitedandpersonalguaranteeprovidedbyMr.AravindS Melligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompany.Workingcapitalfacilitiesarerepayableondemand.CCcarryinterestratesofT-Bill3Months7.08%+Spread2.16%=9.24%p.a.,PCFCcarriesaninterestof Term SOFR + 200 bps. Loan outstanding as at September 30, 2024 towards cash credit, EPC and PCFC facilities are ₹ 106.96 million , ₹ nil and ₹ 111.05 million respectively.

Aerostructures Manufacturing India Private Limited (ASMIPL) Working capital facilities taken by the Company includes Pre-shipment Credit in Foreign Currency (PCFC) and Cash Credit (CC). Working capital facilities are secured by hypothecation of raw material, semi-finished goods, finished goods, existing and futurereceivables(excludingreceivablesfromrelatedparties)andothercurrentassets.Collateralsecurityincludes,parceloflandownedbyAequsSEZPrivateLimitedandhypothecationchargesonunencumberedplantandmachineriesandotherfixed assetsoftheCompany.ThefacilitiesarealsosecuredbypersonalguaranteegivenbyMr.AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyAL,ASEZandMFRETrust.CC andPCFC,availedfromHDFCcarriesaninterestofRepoRate3months+Spread2.70%andTermSOFR+200bps,respectivelyandavailedfromAxiscarriesaninterestofReporate+spread3.50%and1yearSOFR+190bps,respectively.Loan outstanding as at September 30, 2024 towards CC and PCFC facilities availed from HDFC Bank are ₹ 86.55 million and ₹ 633.25 million, respectively and availed from Axis Bank are ₹ 40.17 million and ₹ 679.30 million, respectively.

Working capital facilities are repayable on demand, and below interest rates are applicable As at September 30, 2024 PCFC CC HDFC Bank Term SOFR + 200 bps T-Bill3Months + Spread 2.59% Axis Bank 1 YR SOFR+190 bps Repo + 3.50% Aerostructures Assemblies India Private Limited (AAI) ((i) As at the period end, the Company has a total sanction limit of ₹150.00 which is split between fund based limit of ₹130.00 and non-fund based limit of ₹20.00.

(ii)WorkingcapitalfacilitytakenbycompanyfromHDFCBankcarriesinterestrateof3monthT-Bill+2.25%p.a.Workingcapitalfacilitiesarerepayableondemandandarerenewableonyearlybasis.LoanoutstandingasatSeptember30,2024is₹

85.56 million.

(iii)Workingcapitalfacilitiestakenaresecuredprimarilybyhypothecationofstockandbookdebts;furthercollaterallysecuredbychargeonexistingplantandmachineryandmovableassetsandcorporateguaranteegivenbytheshareholdertheParent Company.

(iv) The working capital loan is reduced by Ind AS adjustments for unamortised financial guarantee received amounting to ₹ 0.54.

Aequs Force Consumer Products Private Limited (AFCPPL)

(a)WorkingcapitalfacilitiesavailedduringtheyearbytheCompanyarerepayableondemandandincludeExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC)andCashCredit(CC).Workingcapitalfacilitiesaresecured byhypothecationofinventories,existingandfuturereceivablesandothercurrentassetsandexclusivechargeonplantandmachineriesoftheCompanywithinterestT-Bill3Months6.87%+Spread3.97%.TheloanisalsosecuredbyaCorporate guarantee provided by the Parent Company. Loan outstanding as at September 30, 2024 is ₹ 25.40 million.

Aequs Consumer Products Private Limited (ACPPL)

(a)WorkingcapitalfacilitiestakenbytheCompanyfromHDFCbankincludesLetterofCreditandCashCredit(CC).Workingcapitalfacilitiesaresecuredbyhypothecationofrawmaterial,semi-finishedgoods,finishedgoods,existingandfuture receivables.Collateralsecurityincludes,parceloflandandbuildingownedbyM/s.MFREPrivateTrustandhypothecationchargesonunencumberedplantandmachineriesandotherfixedassetsoftheCompany. PersonalguaranteegivenbyMr.

Aravind S Melligeri, Executive Chairman and Chief Executive Officer of the Parent Company. CC carries interest @ 3T-Bill 3 Months 7.03% + Spread 4.01% p.a. This facility has been closed during the current period.

Aequs Aerospace France SAS ('AAF Corp')

(a) Working capital facility comprises of factoring arrangements amounting to INR 133.91 million as at September 30, 2024 taken on a recourse basis.

(C) Loan from related parties Aequs Aerospace LLC (AALLC), USA Loan taken from Melligeri Investment LLC(MILLC) amounting to INR 16.00 carries interest rate of 13%p.a & is repayable on demand.

Aequs Aerospace BV (AABV) Loan taken from Aequs Manufacturing Investments Private Limited (AMIPL) amounting to USD 3 million (INR 251.13 million) carrying an interest rate of 13% p.a. and is repayable on demand.

(This space is intentionally left blank) 444Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(b) As at September 30, 2024(continued)

(D) Details of Quarterly statements of current assets filed by the company with the bank and reconciliation with books of account for the six months ended September 30, 2024:

Quarter Name of bank Particulars of Amount as reported Amount as per Amount of difference Reason for Securities Provided in the quarterly books of account discrepancies return/ statements (net of provision) Jun-24 Various Banks Inventories 3,108.00 3,151.62 43.62 Refer below Note Sep-24 Inventories 3,486.00 3,490.21 4.21

(a) Adjustment entries representing provisions for slow moving and obsolete inventories and inventorisation of overheads made after submission of the statement.

Quarter Name of bank Particulars of Amount as reported Amount as per Amount of difference Reason for Securities Provided in the quarterly books of account discrepancies return/ statements (net of provision) Jun-24 Various Banks Trade receivables 1,213.00 1,532.70 319.70 Refer below Note Sep-24 Trade receivables 1,045.00 1,449.19 404.19

(a) The amount as per quarterly statements excludes receivables from related party and adjustment entries representing loss allowance for receivables, adjustment of customer advances after submission of the Statement.

(c) As at March 31, 2025

(A) Term loans Aequs Engineered Plastics Private Limited (AEPPL) INR loan from banks

(i)TheECLGSrupeeloanconsistsofWorkingCapitalTermLoan(WCTL)frombankwithoutstandingbalanceof₹NilasonMarch31,2025.ThecarryinginterestatREPORateplus3.90%p.a.Theloanissecuredbyextensionofhypothecationof entireprimarysecurityavailableforexistingSecurities,Collateral:ExtensionofSecondChargeonexistingsecuritysituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanhas 100%guaranteefromNationalCreditGuaranteeTrusteeCompanyLimited(NCGTC).Thetermloanisrepayablein36monthlyinstalmentspostmoratoriumperiodof12monthsfromthedateofdisbursementoftheloani.e.September21,2020, making the total term of the loan 48 months. This loan facility was closed during the current year.

(ii)TheECLGSrupeeloanconsistsof WCTLfrombankwithoutstandingbalanceof₹22.00millionasonMarch31,2025,carryinginterestatREPORateplus4%p.a.(Capped@9.25%)Theloanissecuredbyextensionofhypothecationofentire primarysecurityavailable forexistingSecurities,Collateral:ExtensionofSecondChargeonexistingsecuritysituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanhas100% guarantee from NCGTC. The term loan is repayable in 36 monthly instalments post moratorium period of 24 months from the date of disbursement of the loan, making the total term of the loan 60 months.

Foreign currency loan from banks Asecuredforeigncurrencyloanfrombankwithoutstandingbalance₹0.00millionasonMarch31,2025,carryinginterestat6MSOFR+300basispointsp.a.TheloanissecuredbyhypothecationofentirePPEacquiredortobeacquiredoutofbank financeinthenameoftheCompany.CollateralsecurityincludesregisteredequitablemortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanisalsosecured by the corporate guarantee by Aequs SEZ Private Limited. The term loan is repayable in 73 monthly instalments.This loan facility was closed during the current period.

Aerostructures Manufacturing India Private Limited (ASMIPL) INR loan from banks

1)HDFCBank:TermloantakenbytheCompanycarriesaninterestat1YRSMCLR+1.35%p.a.andisrepayablein60monthlyinstalmentsandissecuredbyhypothecationofplant&machinery,collateralsecurityover parcelofland&building ownedby M/s.MFREPrivateTrust, thepersonalguaranteeofMr.Aravind SMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbytheParentCompany(restrictedtotheextentof ₹600.00million)and &M/s.MFREPrivateTrusttotheextentofvalueofthepropertywhichisprovidedascollateral.TheoutstandingbalanceoftheloanasonMarch31,2025is₹3.33million.Anamountof₹1.35millionhasbeenhasbeen adjusted against this loan on account of unamortised financial guarantee expense and unamortised loan processing fees.

2)HDFCBank:TermloantakenbytheCompanycarriesaninterestat3MTBILL+2.2.%p.a.andisrepayablein60monthlyinstalmentsandissecuredbyhypothecationofrawmaterial,semi-finishedgoods,finishedgoods,existingandfuture receivables(excludingreceivablesfromrelatedparties)andothercurrentassets.Collateralsecurityincludes,parceloflandownedbyAequsSEZPrivateLimited('ASEZ')andhypothecationchargesonunencumberedplantandmachineriesandother fixed assets of the Company and personal guarantee given by Mr. Aravind S Melligeri, Executive Chairman and Chief Executive Officer of the Parent Company. The outstanding balance of the loan as on March 31, 2025 is ₹26.86 million.

3)AxisBank:TermloantakenbytheCompanycarriesaninterestatREPO+3.40% p.a.andisrepayablein60monthlyinstalmentsandissecuredHypothecationonentirePlantandMachineryPurchasedoutofTermLoanoftheborrower,bothpresent and future.The outstanding balance of the loan as on March 31, 2025 is ₹ 144.78 million.

4)HDFCBank:ECLGSLoantakenbytheCompanycarriesaninterestat1YRSMCLR+1.35%p.a. andisrepayablein60monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyextensionofsecondchargeoverPrimaryand secondary securities Including Mortgage Created in favour of bank. ECLGS Loan is 100% guaranteed by NCGTC+C11 (Ministry of Finance, Government of India). The outstanding balance of the loan as on March 31, 2025 is ₹41.50 million.

5)AxisBank:ECLGSLoantakenbytheCompanycarriesaninterestatREPO+4.85%p.a.(cappedat9.25%)andisrepayablein48monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyhypothecationofplant&machinery, collateralsecurityoverparceloflandownedbyAequsSEZPvtLtd(restrictedtothevalueoftheland),ECLGSLoanis100%guaranteedbyNCGTC(MinistryofFinance,GovernmentofIndia).TheoutstandingbalanceoftheloanasonasonMarch 31, 2025 is ₹21.12 million.

6)AxisBank:ECLGSLoantakenbytheCompanycarriesaninterestatREPO+4.85%p.a.(cappedat9.25%)andisrepayablein48monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyhypothecationonentirecurrentassets of the borrower both present and future, ECLGS Loan is 100% guaranteed by NCGTC ( Ministry of Finance, Government of India). The outstanding balance of the loan as on March 31, 2025 is ₹46.40 million.

(This space is intentionally left blank) 445Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(c) As at March 31, 2025 (continued)

(A) Term loans (continued) Aequs Limited (formerly known as Aequs Private Limited) (AL) INR loan from banks GuaranteedEmergencyCreditLineintheformofIndianrupeeTermLoanfrombankcarriesinterestat8.25%+Spread,i.e.9.25%asonOctober31,2024p.a.andrepayablein36monthlyinstalmentsafteramoratoriumof12months.Loanissecured byanextensionofsecondrankingchargeoverexistingprimary&collateralsecuritiesincludingmortgagescreatedinfavouroftheBank,personalguaranteeofMr.AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParent Company and corporate guarantee given by Aequs SEZ Private Limited. This loan facility was closed during the current period.

Aequs Aero Machine Inc. (AAM) INR loan from banks AAMhasobtainedforeigncurrencyloansinUSDatinterestratesrangingfrom4.73%to6.18%perannum.TheseloansaretakenfromENGsCommercialFinance,U.S.BankEquipmentFinance,andNewLaneFinance,arerepayableover60to84 monthly installments from the date of disbursement. They are secured by the respective machinery for which the loans were sanctioned. As of March 31, 2025, the outstanding loan amount is ₹15.30 million.

Aequs Aerospace France SAS (AAF Corp) INR loan from banks ForeigncurrencyloanstakenbyAAFCorpinEuroscarryinterestratesfrom2.03%to2.25%p.a.Theloansarerepayableover5to7years.LoanfromBPIFrance,HSBCandCreditCooperatifisguaranteedfor80%bytheNationalGuaranteeFund of the High Balance Sheet Enhancement Loans, and loans from Codefi and Region are loans without Guarantee. Loan outstanding as at March 31, 2025 is ₹ 69.04 million.

Aequs Consumer Products Private Limited (ACPPL) Foreign currency loan from banks

(a)HDFCBank:TermloantakenbytheCompanycarriesaninterestat1YRSMCLR+2.50% p.aandisrepayablein60monthlyinstalments(includingcurrentmortariumperiodof9months)andissecuredbyhypothecationofplant&machinery, collateralsecurityoverparcelofland&buildingownedbyM/s.MFREPrivateTrust,thepersonalguaranteeofMr.AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/s.

MFRE Private Trust. An amount of Nil has been adjusted against the loan on account of unamortized loan processing charges. This loan facility was closed during the current period.

(b)CanaraBank: TermloantakenbytheCompanycarriesaninterestat-PresentRLLR8.30%+3%CRPoverRLLR+0.8%Liquiditypremiumandisrepayablein8years6monthsmonthlyinstalments(Includingrepaymentholidayperiodof18 months)andissecuredbyhypothecationofplant&machinery/equipment,miscellaneousAssetsandelectricalinstallation,collateralsecurityover parcelofland&buildingownedbyM/sAequsSEZprivatelimited, thepersonalguaranteeofMr.

AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/SAequsSEZPrivateLimitedandtheParentCompany.ThistermloanfacilityclosedduringtheyearendedMarch31,

2024.

(c)HDFCBank:TermloanofSanctionamountof₹2000milliontakenbytheCompanyandOutstandingamountasonMarch31,2025of₹1,012.67millioncarriesaninterest8.95%p.a.(linkedtoT-bill3months).andisrepayableinRTL:Doorto Doortenorof[78months]fromthedateoffirstdisbursement,moratoriumperiodof[18months]andrepaymentperiodof[21quarterlyrepayments],commencingfromMarch'2025andendinginMarch'2030.andissecuredbyhypothecationofplant& machinery,collateralsecurityoverparcelofland&buildingownedbyM/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral),thepersonalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChiefExecutive OfficeroftheParentCompanyandcorporateguaranteegivenbyM/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral)andM/StheParentCompany.Anamountof₹0.01millionhasbeenadjustedagainsttheloanon account of unamortized loan processing charges.

(d)KarnatakaBank: TermloanofSanctionamountof₹983.74milliontakenbytheCompanyandOutstandingamountasonMarch31,2025of₹484.99Millioncarriesaninterestat6MT-bill+2.77% p.aandisrepayableinRTL:DoortoDoor tenorof[78months]fromthedateoffirstdisbursement,moratoriurnperiodof[18months]andrepaymentperiodof[21quarterlyrepayments],commencingfromMarch'2025andendinginMarch'2030andissecuredbyhypothecationofplant& machinery,collateralsecurityover parcelofland&buildingownedbyM/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral),thepersonalguaranteeofMr.AravindSMelligeri,ExecutiveChairmanandChief ExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/SAequsSEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral)andM/StheParentCompany.Anamountof₹2.00millionhasbeenadjustedagainst the loan on account of unamortized loan processing charges.

(e) The term loans are reduced by Ind AS adjustments for unamortised financial guarantee received amounting to ₹ Nil, unamortised transaction cost (loan processing charges) received amounting to ₹11.48 million.

(B) Current Borrowings (Working capital) Aequs Engineered Plastics Private Limited (AEPPL) WorkingcapitalfacilitiesincludesCashCredit,ExportPackingCredit(EPC)andPackingCreditinForeignCurrency(PCFC).Workingcapitalfacilitiesareprimarilysecuredbypresentandfuturehypothecationofentirestocksofrawmaterial,stock inprocess,finishedgoods,sparesandreceivablesandothercurrentassets.CollateralsecurityincludesregisteredmortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivate Limited.TheloanisalsosecuredbythecorporateguaranteebyAequsSEZPrivateLimited.CCandEPCcarriesaninterestofREPO+4.85%p.a.whilePCFCcarriesaninterestof6mSOFR+200bps.LoanoutstandingasatMarch31,2025towards Cash Credit and EPC facilities are ₹ 91.99 million and ₹ 38.08 million, respectively.

Aequs Limited (formerly known as Aequs Private Limited) (AL) WorkingcapitalfacilitiesincludesCashCredit,ExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC).Workingcapitalfacilitiesaresecuredprimarilybyhypothecationofstockmeantforexportandbookdebts;further collaterallysecuredbychargeonexistingunincumberedplantandmachineryandparceloflandownedbyAequsSEZPrivateLimited,corporateguaranteeprovidedbyAequsSEZPrivateLimitedandpersonalguaranteeprovidedbyMr.AravindS Melligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompany.Workingcapitalfacilitiesarerepayableondemand.CCcarryinterestratesofT-Bill3Months7.08%+Spread2.16%=9.24%p.a.,PCFCcarriesaninterestof Term SOFR + 200 bps. Loan outstanding as at March 31, 2025 towards cash credit, EPC and PCFC facilities are ₹ 71.92 million , ₹ nil and ₹ 151.67 million respectively.

(This space is intentionally left blank) 446Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(c) As at March 31, 2025 (continued)

(B) Current Borrowings (Working capital) (continued) Aerostructures Manufacturing India Private Limited (ASMIPL) WorkingcapitalfacilitiestakenbytheCompanyincludesExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC)andCashCredit(CC).Workingcapitalfacilitiesaresecuredbyhypothecationofrawmaterial,semi-finished goods,finishedgoods,existingandfuturereceivables(excludingreceivablesfromrelatedparties)andothercurrentassets.Collateralsecurityincludes,parceloflandownedbyAequsSEZPrivateLimitedandhypothecationchargesonunencumbered plantandmachineriesandotherfixedassetsoftheCompany.ThefacilitiesarealsosecuredbypersonalguaranteegivenbyMr.AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguarantee givenbyAL,ASEZandMFRETrust.CCcarriesaninterestofT-Bill3months+2.59%p.a.whilePCFCcarriesaninterestofTermSOFR+200bps.LoanoutstandingasatMarch31,2025towardsCCandPCFCfacilitiesavailedfromHDFCBank are ₹ 32.78 million and ₹ 709.35 million, respectively and availed from Axis Bank are ₹ 65.56 million and ₹ 745.66 million, respectively.

Aerostructures Assemblies India Private Limited (AAI)

(i) As at the year end, the Company has a total sanction limit of ₹150.00 million which is split between fund based limit of ₹130.00 million and non-fund based limit of ₹20.00 million.

(ii)WorkingcapitalfacilitytakenbycompanyfromHDFCBankcarriesinterestrateof3monthT-Bill+2.25%p.a.Workingcapitalfacilitiesarerepayableondemandandarerenewableonyearlybasis.LoanoutstandingasatMarch31,2025is₹

73.62 million.

(iii)Workingcapitalfacilitiestakenaresecuredprimarilybyhypothecationofstockandbookdebts;furthercollaterallysecuredbychargeonexistingplantandmachineryandmovableassetsandcorporateguaranteegivenbytheshareholdertheParent Company.

(iv) The working capital loan is reduced by Ind AS adjustments for unamortised financial guarantee received amounting to ₹2.00.

Aequs Force Consumer Products Private Limited (AFCPPL)

(a)WorkingcapitalfacilitiesavailedduringtheyearbytheCompanyarerepayableondemandandincludeExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC)andCashCredit(CC).Workingcapitalfacilitiesaresecured byhypothecationofinventories,existingandfuturereceivablesandothercurrentassetsandexclusivechargeonplantandmachineriesoftheCompanywithinterestT-Bill3Months6.87%+Spread3.97%.TheloanisalsosecuredbyaCorporate guarantee provided by the Parent Company. Loan outstanding as at March 31, 2025 is Nil.

Aequs Consumer Products Private Limited (ACPPL)

(a)WorkingcapitalfacilitiestakenbytheCompanyfromHDFCbankincludesLetterofCreditandCashCredit(CC).Workingcapitalfacilitiesaresecuredbyhypothecationofrawmaterial,semi-finishedgoods,finishedgoods,existingandfuture receivables.Collateralsecurityincludes,parceloflandandbuildingownedbyM/s.MFREPrivateTrustandhypothecationchargesonunencumberedplantandmachineriesandotherfixedassetsoftheCompany. PersonalguaranteegivenbyMr.

Aravind S Melligeri, Executive Chairman and Chief Executive Officer of the Parent Company. CC carries interest @ 3T-Bill 3 Months 7.03% + Spread 4.01% p.a. This facility has been closed during the current period.

Aequs Aerospace France SAS (AAF Corp)

(a) Working capital facility comprises of factoring arrangements amounting to INR 200.36 million as at March 31, 2025 taken on a recourse basis.

(C) Loan from related parties Aequs Aerospace LLC (AALLC) Loan taken from Melligeri Investment LLC(MILLC) amounting to INR 16.33 carries interest rate of 13%p.a & is repayable on demand.

Aequs Aerospace BV (AABV) Loan taken from Aequs Manufacturing Investments Private Limited (AMIPL) amounting to USD 3 million (INR 277.83 million) carrying an interest rate of 13% p.a. and is repayable on demand.

(D) Details of quarterly statements of current assets filed by the Company with the bank and reconciliation with the books of account for the year ended March 31, 2025:

Quarter Name of bankParticulars of Securities Provided Amount as reported Amount as per Amount of Reason for in the quarterly books of account difference discrepancies return/ statements (net of provision) Jun-24 Inventories 3 ,109.43 3,109.75 0.32 Sep-24 Inventories 3 ,487.00 3,488.00 1.00 Various Banks Refer below note Dec-24 Inventories 3 ,576.00 3,579.00 3.00 Mar-25 Inventories 3 ,351.28 3,400.04 48.76

(a) The difference is due to rounding off adjustments.

(b) The amount declared for the quarter ending March 2025 in the stock statement was before the conclusion of audit. The closing value of inventory was revised due to inventorisation of overheads.

Quarter Name of bank Particulars of Securities Provided Amount as reported Amount as per Amount of Reason for in the quarterly books of account difference discrepancies return/ statements Jun-24 Trade receivables 1 ,561.00 1,559.81 1.19 Sep-24 Trade receivables 1 ,496.00 1,493.00 3.00 Various Banks Refer below note Dec-24 Trade receivables 1 ,540.00 1,544.00 ( 4.00) Mar-25 Trade receivables 1 ,628.80 1,607.89 20.91

(a) Differences are due to adjustments made post submission of the statement to the bank.

(b) The above amounts pertain to entities in the Group that have availed working capital borrowings in India.

(E) Loan covenants Under the terms of the borrowing facilities with various banks, the below entities of the group are required to comply with following financial covenants :

AL ASMIPL AAI AFCPPL ACPPL AEPPL Total Net Worth (TNW) > INR 500 > INR 1,742 - > INR 150 - > INR 200 Total Outside Liabilities (TOL)/ Adjusted TNW < 3 < 4 < 3 < 4 < 3 - Interest Coverage Ratio (ICOR) > 2 > 2 - - - - Debt Service Coverage Ratio (DSCR) > 1.2 > 1.2 > 1.2 - > 1.25 > 1.5 Compliance Complied with the Complied with the Complied with the Complied with the Complied with the Complied with the above covenants. above covenants. above covenants. above covenants. above covenants. above covenants other than debt service coverage ratio

Notes:

(i) There are no restrictive covenants on Parent Company’s share capital.

(ii)Breachesincomplyingwiththefinancialcovenantswouldpermitthebanktocallbacktheloans.However,theGroupcontinuestoclassifytheloansasnon-currentbasedonitsoriginalrepaymentscheduleasintheviewofmanagement,thebreachis not material and the bank has not demanded repayment of the loan before the date of approval of these financial statements.

Refer Note 36 - Net debt reconciliation for reconciliation of movements of liabilities to cash flows arising from financing activities and Note 37 - Assets pledged as security against the current and non-current borrowings.

(This space is intentionally left blank) 447Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(d) As at March 31, 2024

(A) Term loans Aequs Limited (formerly known as Aequs Private Limited) (AL) INR loan from banks GuaranteedEmergencyCreditLineintheformofIndianrupeeTermLoanfrombankcarriesinterestat8.25%+Spread,i.e.9.25%ason31.03.2024p.a.andrepayablein36monthlyinstalmentsafteramoratoriumof12months.Loanissecuredbyan extensionofsecondrankingchargeoverexistingprimary&collateralsecuritiesincludingmortgagescreatedinfavouroftheBank,personalguaranteeofMr.AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParent Company and corporate guarantee given by Aequs SEZ Private Limited.

AeroStructures Manufacturing India Private Limited (ASMIPL)

1)HDFCBank:TermloantakenbytheCompanycarriesaninterestat1YRSMCLR+1.35% p.a.andisrepayablein57monthlyinstalmentsandissecuredbyhypothecationofplant&machinery,collateralsecurityover parcelofland&building ownedby M/s.MFREPrivateTrust, thepersonalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbytheParentCompany(restrictedtotheextentof ₹600.00)and &M/s.MFREPrivateTrusttotheextentofvalueofthepropertywhichisprovidedascollateral,thevalueofwhichis₹213.00.TheoutstandingbalanceoftheloanasonMarch31,2024Nil.Anamountof₹2.00hasbeenhasbeen adjusted against this loan on account of unamortised financial guarantee expense and unamortised loan processing fees. This loan facility closed during the year in December 2023.

2)HDFCBank:TermloantakenbytheCompanycarriesaninterestat1YRSMCLR+1.35% p.a.andisrepayablein60monthlyinstalmentsandissecuredbyhypothecationofplant&machinery,collateralsecurityover parcelofland&building ownedby M/s.MFREPrivateTrust, thepersonalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbytheParentCompany(restrictedtotheextentof ₹600.00)and&M/s.MFREPrivateTrusttotheextentofvalueofthepropertywhichisprovidedascollateral.TheoutstandingbalanceoftheloanasonMarch31,2024is₹13.00. Anamountof₹0.00hasbeenhasbeenadjustedagainstthisloanon account of unamortised financial guarantee expense and unamortised loan processing fees.

3)HDFCBank:TermloantakenbytheCompanycarriesaninterestat3MTBILL+2.2.%p.a.andisrepayablein60monthlyinstalmentsandissecuredbyhypothecationofrawmaterial,semi-finishedgoods,finishedgoods,existingandfuture receivables(excludingreceivablesfromrelatedparties)andothercurrentassets.Collateralsecurityincludes,parceloflandownedbyAequsSEZPrivateLimited('ASEZ')andhypothecationchargesonunencumberedplantandmachineriesandother fixed assets of the Company and personal guarantee given by Mr. Aravind S Melligeri, Executive Chairman and Chief Executive Officer of the Parent Company. The outstanding balance of the loan as on March 31, 2024 is ₹35.00

4) Emergency Credit Line Guarantee Scheme (ECLGS) Loan - INR Loan a)HDFCBank:ECLGSLoantakenbytheCompanycarriesaninterestat1YRSMCLR+1.35%p.a. andisrepayablein60monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyextensionofsecondchargeoverPrimaryand secondary securities Including Mortgage Created in favour of bank. ECLGS Loan is 100% guaranteed by NCGTC+C11 ( Ministry of Finance, Government of India). The outstanding balance of the loan as on March 31, 2024 is ₹83.00.

b)AxisBank:ECLGSLoantakenbytheCompanycarriesaninterestatREPO+4.85%p.a.andisrepayablein48monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyhypothecationofplant&machinery,collateralsecurity over parceloflandownedbyAequsSEZPvtLtd(restrictedtothevalueoftheland),ECLGSLoanis100%guaranteedbyNCGTC(MinistryofFinance,GovernmentofIndia).TheoutstandingbalanceoftheloanasonasonMarch31,2024is ₹53.00.

c)AxisBank:ECLGSLoantakenbytheCompanycarriesaninterestatREPO+4.85%p.a.andisrepayablein48monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyhypothecationonentirecurrentassetsoftheborrowerboth present and future, ECLGS Loan is 100% guaranteed by NCGTC ( Ministry of Finance, Government of India). The outstanding balance of the loan as on March 31, 2024 is ₹86.00

Corporate guarantees:

For HDFC Bank: The Parent Company (to the extent of ₹800.00), Aequs SEZ Private Limited (restricted to value of the property of Aequs SEZ Pvt Ltd which is provided as collateral. i.e. ₹40.00) , MFRE (for the entire loan amount).

For Axis Bank: The Parent Company (for entire loan amount), Aequs SEZ Private Limited (restricted to value of the property i.e. ₹112.40 of Aequs SEZ Pvt Ltd which is provided as collateral.) Aequs Aerospace France SAS (AAF Corp) ForeigncurrencyloanstakenbyAAFCorpinEuroscarryinterestratesfrom2.03%to2.25%p.a.Theloansarerepayableover5to7years.LoanfromBPIFrance,HSBCandCreditCooperatifisguaranteedfor80%bytheNationalGuaranteeFund of the High Balance Sheet Enhancement Loans, and loans from Codefi and Region are loans without Guarantee.

Aequs Aerospace BV (AABV) USDTermLoanfromEximbankcarriesinterestatUSDOvernightSOFRratePlus495basispointsandrepayablein28quarterlyinstalments.Loanissecuredbyhypothecationofplantandmachinery,collateralsecurityover parceloflandownedby AequsSEZPvtLtd,PledgeofsharesofAequsHoldingFranceSASheldbyAequsAerospaceBV,Netherlands,PledgeofSharesofSIRASASFranceheldbyAequsHoldingFranceSAS,CGofASMIPL&ASEZ, personalguaranteeofMr.

Aravind Melligeri, Executive Chairman and Chief Executive Officer of the Parent Company. However this loan was repaid completely and closed during the year.

Aequs Toys Private Limited (ATPL) Term loan INR loan TermLoanfromHDFCbankwithoutstandingamountofNilcarriedoninterestatT-BILL-90DAYS+2.58%p.a.andrepayablein6years6months,monthlyinstalments(including6monthsmoratoriumperiod).Loanissecuredbyanexclusive chargeonmovablefixedassetsandcurrentassets(tradereceivablesandinventories)ofthecompany,exclusivechargeonbuildingownedbyMFREPrivateTrust,personalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChiefExecutive OfficeroftheParentCompanyandcorporateguaranteegivenbytheParentCompanyandMFREPrivateTrust.AnamountofNilhavebeenadjustedagainstloanonaccountofunamortisedfinancialguaranteeexpenseandunamortisedprocessingfees respectively. This loan is closed during the year ended March 31, 2024.

Koppal Toys Molding COE Private Limited (KTMCPL) Term loan from Bank - INR Loan

CanaraBank:TermloantakenbytheCompanycarriesaninterestat-PresentRLLR9.25%+3%+0.4%.andoverrepayablein5yearsmonthlyinstalments(Includingrepaymentholidayperiodof12months)andissecuredbyhypothecationofplant& machinery/equipment's. The Parent Company provides corporate guarantee. however the loan was fully paid during the year.

Aequs Rajas Extrusion Private Limited (AREPL) AsonMarch31,2024,theCompanyhasavailedaloanofRs7.00fromtheParentCompany.TheLoancarriesaninterestrateof12%p.a.payablemonthly.Asperagreement,unlessotherwiseagreedinwritingbetweentheparties,Borrowershallpay outstandingprincipalamountwithin48monthsaftertheendofthemoratoriumperiodof12monthsfromthedateoffirstdisbursementofLoani.e.,January20,2022Amountalongwithaccruedinterestthereon.TheLoanisconvertibleintoequity shares at the option of the lender.

Aequs Consumer Products Private Limited (ACPPL)

(a)HDFCBank:TermloantakenbytheCompanycarriesaninterestat1YRSMCLR+2.50% p.aandisrepayablein60monthlyinstalments(includingcurrentmortariumperiodof9months)andissecuredbyhypothecationofplant&machinery, collateralsecurityover parcelofland&buildingownedbyM/s.MFREPrivateTrust,thepersonalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/s.

MFRE Private Trust. An amount of ₹ Nil has been adjusted against the loan on account of unamortized loan processing charges.

(b)CanaraBank: TermloantakenbytheCompanycarriesaninterestat-PresentRLLR8.30%+3%CRPoverRLLR+0.8%Liquiditypremiumandisrepayablein8years6monthsmonthlyinstalments(Includingrepaymentholidayperiodof18 months)andissecuredbyhypothecationofplant&machinery/equipment,miscellaneousAssetsandelectricalinstallation,collateralsecurityover parcelofland&buildingownedbyM/sAequsSEZprivatelimited, thepersonalguaranteeofMr.

AravindMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/SAequsSEZPrivateLimitedandtheParentCompany.ThistermloanfacilityclosedduringtheyearendedMarch31,

2024.

(c)HDFCBank:Termloanof₹2000.00takenbytheCompanycarriesaninterest8.95%p.a.(linkedtoT-bill3months).andisrepayableinRTL:DoortoDoortenorof[78months]fromthedateoffirstdisbursement,moratoriumperiodof[18 months]andrepaymentperiodof[21quarterlyrepayments],commencingfromMarch,2025andendinginMarch,2030.andissecuredbyhypothecationofplant&machinery,collateralsecurityover parcelofland&buildingownedbyM/SAequs SEZPrivateLimited(totheextentofvalueofLandprovidedasCollateral),thepersonalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/SAequsSEZ Private Limited (to the extent of value of Land provided as Collateral) and the Parent Company. An amount of ₹ 0.01 million has been adjusted against the loan on account of unamortized loan processing charges.

(d)KarnatakaBank:Termloanof₹983.74milliontakenbytheCompanycarriesaninterestat6MT-bill+2.77%p.aandiisrepayableinRTL:DoortoDoortenorof[78months]fromthedateoffirstdisbursement,moratoriurnperiodof[18months] andrepaymentperiodof[21quarterlyrepayments],commencingfromMarch'2025andendinginMarch'2030andissecuredbyhypothecationofplant&machinery,collateralsecurityoverparcelofland&buildingownedbyM/SAequsSEZPrivate Limited(totheextentofvalueofLandprovidedasCollateral),thepersonalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyM/SAequsSEZPrivate Limited (to the extent of value of Land provided as Collateral) and the Parent Company. An amount of ₹ 2.00 million has been adjusted against the loan on account of unamortized loan processing charges.

(e)ThetermloansarereducedbyIndASadjustmentsforunamortisedfinancialguaranteereceivedamountingto₹Nil,unamortisedtransactioncost(loanprocessingcharges)receivedamountingto₹13.00millionandunamortisedfinancialguarantee received amounting to ₹ Nil.

(f) The term loans are reduced by Ind AS adjustments for unamortised transaction cost (loan processing charges) received amounting to ₹13.00 million. (This space is intentionally left blank) 448Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(d) As at March 31, 2024 (continued) Term loans (continued) Aequs Engineered Plastics Private Limited (AEPPL) INR loan from banks

(a)TheECLGSrupeeloanconsistsof WorkingCapitalTermLoan(WCTL)frombankwithoutstandingbalanceof₹10.83millionasonMarch31,2024carryinginterestatREPORateplus3.90%p.a.Theloanissecuredbyextensionof hypothecationofentireprimarysecurityavailableforexistingSecurities,Collateral:ExtensionofSecondChargeonexistingsecuritysituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivate Limited.Theloanhas100%guaranteefromNationalCreditGuaranteeTrusteeCompanyLimited(NCGTC).Thetermloanisrepayablein36monthlyinstalmentspostmoratoriumperiodof12monthsfromthedateofdisbursementoftheloani.e.

September 21, 2020, making the total term of the loan 48 months.

(b)TheECLGSrupeeloanconsistsof WCTLfrombankwithoutstandingbalanceof₹33.00millionasonMarch31,2024carryinginterestatREPORateplus4%p.a.Theloanissecuredbyextensionofhypothecationofentireprimarysecurity available forexistingSecurities,Collateral:ExtensionofSecondChargeonexistingsecuritysituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanhas100%guaranteefrom NCGTC. The term loan is repayable in 36 monthly instalments post moratorium period of 24 months from the date of disbursement of the loan, making the total term of the loan 60 months.

Foreign currency loan from banks Asecuredforeigncurrencyloanfrombankwithoutstandingbalance₹4.89millioncarryinginterestat6MSOFR+300basispointsp.a.TheloanissecuredbyhypothecationofentirePPEacquiredortobeacquiredoutofbankfinanceinthenameof theCompany.CollateralsecurityincludesregisteredequitablemortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivateLimited.Theloanisalsosecuredbythecorporate guarantee by Aequs SEZ Private Limited. The term loan is repayable in 73 monthly instalments.

(B) Current Borrowings (Working capital) Aequs Force Consumer Products Private Limited (AFCPPL)

(a)WorkingcapitalfacilitiesavailedduringtheyearbytheCompanyarerepayableondemandandincludeExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC)andCashCredit(CC).Workingcapitalfacilitiesaresecured byhypothecationofinventories,existingandfuturereceivablesandothercurrentassetsandexclusivechargeonplantandmachineriesoftheCompanywithinterestT-Bill3Months6.87%+Spread3.97%.TheloanisalsosecuredbyaCorporate guarantee provided by the Parent Company. The working capital loan is reduced by unamortised financial guarantee received amounting to ₹2.00 million.

Aequs Engineered Plastics Private Limited (AEPPL) WorkingcapitalfacilitiesincludesCashCredit,ExportPackingCredit(EPC)andPackingCreditinForeignCurrency(PCFC).Workingcapitalfacilitiesareprimarilysecuredbypresentandfuturehypothecationofentirestocksofrawmaterial,stock inprocess,finishedgoods,sparesandreceivablesandothercurrentassets.CollateralsecurityincludesregisteredmortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelgauminthenameofAequsSEZPrivate Limited. The loan is also secured by the corporate guarantee by Aequs SEZ Private Limited. CC and EPC carries an interest of REPO+4.25% p.a. while PCFC carries an interest of 6m SOFR + 200 bps.

Aerostructures Assemblies India Private Limited (AAI)

(a) As at the year end, the Company has a total sanction limit of ₹ 150.00 million which is split between fund based limit of ₹ 130.00 million and non-fund based limit of ₹20.00 million.

(b) Working capital facility taken by company from HDFC Bank carries interest rate of 3 month T-Bill + 2.25% p.a. Working capital facilities are repayable on demand and are renewable on yearly basis.

(c)Workingcapitalfacilitiestakenaresecuredprimarilybyhypothecationofstockandbookdebts;furthercollaterallysecuredbychargeonexistingplantandmachineryandmovableassetsandcorporateguaranteegivenbytheshareholdertheParent Company.

AeroStructures Manufacturing India Private Limited (ASMIPL) WorkingcapitalfacilitiestakenbytheCompanyincludesExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC)andCashCredit(CC).Workingcapitalfacilitiesaresecuredbyhypothecationofrawmaterial,semi-finished goods,finishedgoods,existingandfuturereceivables(excludingreceivablesfromrelatedparties)andothercurrentassets.Collateralsecurityincludes,parceloflandownedbyAequsSEZPrivateLimitedandhypothecationchargesonunencumbered plantandmachineriesandotherfixedassetsoftheCompany. PersonalguaranteegivenbyMr.AravindSMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompany.CorporateguaranteegivenbyAL,ASEZandMFRE Trust.CCcarriesaninterestofT-Bill3months+2.59%p.a. whilePCFCcarriesaninterestofTermSOFR+200bps.LoanoutstandingasatMarch31,2025towardsCCandPCFCfacilitiesavailedfromHDFCBankare₹33millionand₹709 million, respectively and availed from Axis Bank are ₹ 66 million and ₹ 746 million, respectively.

Working capital facilities are repayable on demand, and below interest rates are applicable As at As at PCFC EPC CC PCFC EPC CC HDFC Bank Term SOFR + T-Bill 3 Months + T-Bill 3 Months + Term SOFR + T-Bill 3 Months + T-Bill 3 Months + 200 bps Spread 1.23% Spread 2.59% 200 bps Spread 1.23% Spread 2.59% Axis Bank 1 YR Repo + 3.50% Repo + 3.50% 1 YR SOFR+ 3 M MCLR+1.45% 3 M MCLR+1.45% SOFR+190 200 bps bps (This space is intentionally left blank) 449Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(d) As at March 31, 2024

(B) Current Borrowings (Working capital) (continued) Aequs Toys Private Limited (ATPL) WorkingcapitalfacilitiesincludesCashCredithavingsanctionamountof₹Nil.Workingcapitalfacilitiesarebyanexclusivechargeonmovablefixedassetsandcurrentassets(tradereceivablesandinventories)ofthecompany,exclusivechargeon QuesttowerbuildingownedbyMFREPrivateTrust,personalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbytheParentCompanyandMFREPrivate Trust. This loan is closed during the year ended March 31, 2024.

Overdraftagainstthirdpartydeposit(FCNR):OverdraftfacilityissecuredprimarilybylienonForeignCurrencyNonResident(FCNR)deposit.Overdraftfacilitycarryinterestrateof12.15%p.a.Overdraftfacilityamountingto₹18.00millionwas utilized and repaid completely during the year. This loan is closed during the year ended March 31, 2024.

Aequs Limited (formerly known as Aequs Private Limited) (AL) WorkingcapitalfacilitiesincludesCashCredit, ExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC).Workingcapitalfacilitiesaresecuredprimarilybyhypothecationofstockmeantforexportandbookdebts;further collaterallysecuredbychargeonexistingunincumberedplantandmachineryandparceloflandownedbyAequsSEZPrivateLimited,corporateguaranteeprovidedbyAequsSEZPrivateLimitedandpersonalguaranteeprovidedbyMr.AravindS Melligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompany. Workingcapitalfacilitiesarerepayableondemand.CCcarryinterestratesofT-Bill3Months7.08%+Spread2.16%=9.24%p.a.,PCFCcarriesaninterestof Term SOFR + 200 bps.

Aequs Consumer Products Private Limited (ACPPL)

(a)WorkingcapitalfacilitiestakenbytheCompanyfromHDFCbankincludesLetterofCreditandCashCredit(CC).Workingcapitalfacilitiesaresecuredbyhypothecationofrawmaterial,semi-finishedgoods,finishedgoods,existingandfuture receivables.Collateralsecurityincludes,parceloflandandbuildingownedbyM/s.MFREPrivateTrustandhypothecationchargesonunencumberedplantandmachineriesandotherfixedassetsoftheCompany. PersonalguaranteegivenbyMr.

Aravind Melligeri, Executive Chairman and Chief Executive Officer of the Parent Company. CC carries interest @ 3T-Bill 3 Months 7.03% + Spread 4.01% p.a.

(b)WorkingcapitalfacilitiestakenbytheCompanyfromCanaraBankincludesLetterofCreditandCashCredit(CC).WorkingcapitalfacilitiesaresecuredbyhypothecationProposedstockandbookdebts.Collateralsecurityincludes,parcelofland ownedbyM/s.MFREPrivateTrustandhypothecationchargesonunencumberedplantandmachineriesandotherfixedassetsoftheCompany.PersonalguaranteegivenbyMr.AravindMelligeri,ExecutiveChairmanandChiefExecutiveOfficerofthe Parent Company and corporate guarantee given by M/S Aequs SEZ Private Limited and the Parent Company. These working capital facilities are closed during year 2023-24.

(c) The working capital loans was reduced by Ind AS adjustments for unamortised financial guarantee received amounting to ₹ Nil.

(d) Overdraft against third party deposit (FCNR): Overdraft facility is secured primarily by Lien on FCNR deposit. Overdraft facility carry interest rate of 12.15% p.a. This facility was utilised and repaid during the current year.

(C) Loan from related parties Aequs Limited (formerly known as Aequs Private Limited) (AL) Loan from a related party is unsecured, repayable on demand and carries an interest of 12% per annum.

Aequs Engineered Plastics Private Limited (AEPPL) Loan from related party are unsecured and repayable on demand and carry an interest rate of 12% p.a. payable monthly.

Aequs Force Consumer Products Private Limited (AFCPPL) Loan from related party are unsecured and repayable on demand availed from Aequs SEZ Private Limited amounting to ₹Nil and the Parent Company by the Company amounting to ₹Nil. These loans carry an interest rate of 12% p.a. payable monthly.

Aequs Consumer Products Private Limited (ACPPL) Loan from related party pertains to unsecured loan availed by the Company from the Parent Company ₹Nil with interest @ 12% p.a. These loans are repayable on demand. Loan has been fully repaid during year year ended March 31, 2024.

Aequs Aerospace LLC, USA (AALLC) Loan taken from Melligeri Investment LLC (MILLC) amounting to INR 16.00 carries interest rate of 13% p.a & is repayable on demand.

(D) Details of quarterly statements of current assets filed by the company with the bank and reconciliation with the books of accounts for year ended March 31, 2024:

1. Inventories Quarter Name of bankParticulars of Securities Provided Amount as per books Amount as reported Amount of Reason for of account (net of in the quarterly differencediscrepancies provision) return/ statements Jun-23 Axis Bank & Inventories 2 ,741.21 2,945.23 ( 204.02)Refer below note Sep-23 HDFC Bank Inventories 2 ,994.98 3,244.82 ( 249.84) Dec-23 Inventories 2 ,841.18 3,091.16 ( 249.98) Mar-24 Inventories 3 ,021.19 3,026.77 ( 5.58)

(i) As per the sanction letter, the Company needs to exclude obsolete inventories and those inventories aged more than 90 days. However, the Company has excluded inventories in line with the provisioning policy followed by the Company.

(ii) Amount reported quarterly to a bank is excluding the provision for slow moving inventory.

(iii) The amount declared for the quarter ending March 2024 in the stock statement was before the conclusion of audit. The closing value of inventory was revised due to inventorisation of overheads.

2. Trade receivables Quarter Name of bankParticulars of Securities Provided Amount as per books Amount as reported Amount of Reason for of account (net of in the quarterly differencediscrepancies provision) return/ statements Jun-23 Axis Bank Inventories 1 ,268.18 1,205.83 62.35 Refer below note Sep-23 Inventories 1 ,059.86 1,182.20 ( 122.34) Dec-23 Inventories 1 ,030.06 1,145.94 ( 115.88) Mar-24 Inventories 1 ,276.32 1,270.97 5.35

(i) Amounts reported to banks are excluding balances with related parties, foreign exchange adjustments, loss allowance on trade receivables and net of advances.

(ii) Differences are due to adjustments made post submission of the statement to the bank.

(iii) The above amounts pertain to entities in the Group that have availed working capital borrowings in India.

(iv) Excludes unearned revenue amount and unrealised forex gain/loss.

(v) Due to netting off the trade receivables and trade payables outstanding from same customer/vendor and provision for unbilled revenue. (This space is intentionally left blank) 450Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(e) As at March 31, 2023

(A) Term loans Aequs Limited (formerly known as Aequs Private Limited) (AL)

1.Indianrupeetermloanfrombankcarriesinterestat1year MCLR+1.35%p.a.andrepayablein48monthlyinstalments.Loanissecuredbyhypothecationofplantandmachineries,collateralsecurityover parceloflandownedbyASEZ,the personalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbyASEZ.LoanisclosedduringtheyearendingMarch31,2023andchargehasbeenfiledfor modification. The outstanding balance of the loan as on March 31, 2023 is Nil.

2.GuaranteedEmergencyCreditLineintheformofIndianrupeeTermLoanfrombankcarriesinterestat8.25%p.a.andrepayablein36monthlyinstalmentsafteramoratoriumof12months.Loanissecuredbyanextensionofsecondrankingcharge overexistingprimary&collateralsecuritiesincludingmortgagescreatedinfavouroftheBank,personalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenby ASEZ. The outstanding balance of the above loan as on March 31, 2023 is INR 28.00 million AeroStructures Manufacturing India Private Limited (ASMIPL)

1.HDFCBank:TermloantakenbytheCompanycarriesaninterestat1yearMCLR+1.35%p.a.andisrepayablein57monthlyinstalmentsandissecuredbyhypothecationofplant&machinery,collateralsecurityover parcelofland&building ownedby M/s.MFREPrivateTrust, thepersonalguaranteeofMr.AravindMelligeriandcorporateguaranteegivenbytheParentCompany(restrictedtotheextentofINR600.00)and &M/s.MFREPrivateTrusttotheextentofvalueofthe property which is provided as collateral. The outstanding balance of the loan as on March 31, 2023 is INR.17.00 million

2.HDFCBank:TermloantakenbytheCompanycarriesaninterestat1YRSMCLR+1.35%p.a.andisrepayablein60monthlyinstalmentsandissecuredbyhypothecationofplant&machinery,collateralsecurityover parcelofland&building ownedby M/s.MFREPrivateTrust, thepersonalguaranteeofMr.AravindMelligeriandcorporateguaranteegivenbytheParentCompany(restrictedtotheextentofINR600.00)and &M/s.MFREPrivateTrusttotheextentofvalueofthe property which is provided as collateral. The outstanding balance of the loan as on March 31, 2023 is INR.23.00 million

3.HDFCBank:ECLGSLoantakenbytheCompanycarriesaninterestat1YRSMCLR+1.35%p.a. andisrepayablein60monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyextensionofsecondchargeoverPrimaryand secondary securities including Mortgage Created in favour of bank. The outstanding balance of the loan as on March 31, 2023 is INR. 125.00 million

4.AxisBank:ECLGSLoantakenbytheCompanycarriesaninterestatREPO+4.85%p.a.andisrepayablein48monthlyinstalmentsafter12monthsofmoratoriumperiodandissecuredbyhypothecationofplant&machinery,collateralsecurity overparceloflandownedbyAequsSEZPvtLtd(restrictedtothevalueoftheland),ECLGSLoanis100%guaranteedbyNCGTC(MinistryofFinance,GovernmentofIndia).TheoutstandingbalanceoftheloanasonMarch31,2023isINR.85.00 million

5. Axis Bank: ECLGS Loan taken by the Company carries an interest at REPO + 4.85% p.a. and is repayable in 47 monthly instalments after 12 months of moratorium period and is secured by hypothecation on entire current assets of the borrower both present and future, ECLGS Loan is 100% guaranteed by NCGTC ( Ministry of Finance, Government of India). The outstanding balance of the loan as on March 31, 2023 is INR. 126.00 million Aequs Aerospace France SAS (AAF Corp) ForeigncurrencyloanstakenbyAAFCorpinEuroscarryinterestratesfrom2.03%to2.25%p.a.Theloansarerepayableover5to7years.LoanfromBPIFrance,HSBCandCreditCooperatifisguaranteedfor80%bytheNationalGuaranteeFund of the High Balance Sheet Enhancement Loans, and loans from Codefi and Region are without Guarantee loans. The outstanding balance of the loan as on March 31, 2023 is Euro 1,090,524.

Aequs Aerospace BV (AABV) USDTermLoanfromEximbankcarriesinterestatUSDOvernightSOFRratePlus495basispointsandrepayablein28quarterlyinstalments.Loanissecuredbyhypothecationofplantandmachinery,collateralsecurityoverparceloflandownedby AequsSEZPvtLtd,PledgeofsharesofAequsHoldingFranceSASheldbyAequsAerospaceBV,Netherlands,PledgeofSharesofSIRASASFranceheldbyAequsHoldingFranceSAS,CGofASMIPL&ASEZ, personalguaranteeofMr.

Aravind Melligeri. The outstanding balance of the loan as on March 31, 2023 is Euro 1,991,733.

Koppal Toys Molding COE Private Limited (KTMCPL)

CanaraBank:TermloantakenbytheCompanycarriesaninterestat-PresentRLLR9.25%+3%+0.4%.andoverrepayablein5yearsmonthlyinstalments(Includingrepaymentholidayperiodof12months)andissecuredbyhypothecationofplant& machinery/equipments. The Parent Company provides corporate guarantee. The outstanding balance of the loan as on March 31, 2023 is INR 25.00 million Aequs Engineered Plastics Private Limited (AEPPL) INR loan from banks

1.TheECLGSrupeeloanconsistsofWorkingCapitalTermLoan(WCTL)frombankwithoutstandingbalanceofINR33carryinginterestatREPORateplus3.90%p.a.Theloanissecuredbyextensionofhypothecationofentireprimarysecurity availableforexistingSecurities,Collateral:ExtensionofSecondChargeonexistingsecuritysituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelagaviinthenameofAequsSEZPrivateLimited.Theloanhas100%guaranteefrom National Credit Guarantee Trustee Company Limited (NCGTC). The term loan is repayable in 36 monthly instalments post moratorium period of 12 months from the date of disbursement of the loan, making the total term of the loan 48 months.

2.TheECLGSrupeeloanconsistsof WCTLfrombankwithoutstandingbalanceofINR33.00millioncarryinginterestatREPORateplus4%p.a.Theloanissecuredbyextensionofhypothecationofentireprimarysecurityavailable forexisting Securities,Collateral:ExtensionofSecondChargeonexistingsecuritysituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelagaviinthenameofAequsSEZPrivateLimited.Theloanhas100%guaranteefromNCGTC.Thetermloan is repayable in 36 monthly instalments post moratorium period of 24 months from the date of disbursement of the loan, making the total term of the loan 60 months.

Foreign currency loan from banks

3.AsecuredforeigncurrencyloanfrombankwithoutstandingbalanceNilcarryinginterestat6MSOFR+300 basispointsp.a..TheloanissecuredbyhypothecationofentirePPEacquiredortobeacquiredoutofbankfinanceinthenameofthe Company.CollateralsecurityincludesregisteredequitablemortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelagaviinthenameofAequsSEZPrivateLimited.Theloanisalsosecuredbythecorporateguarantee byAequsSEZPrivateLimited.Thetermloanisrepayablein72monthlyinstalments.Duringtheyear,theloanhasbeenrepaidandfullandanoduescertificatehasbeenobtainedfromthebank.AnamountofNilhavebeenadjustedagainstthisloanon account of unamortised processing fees and unamortised financial guarantee expense respectively.

4.Asecuredforeigncurrencyloanfrombankwithoutstandingbalance$0.29carryinginterestat6MSOFR+300 basispointsp.a.TheloanissecuredbyhypothecationofentirePPEacquiredortobeacquiredoutofbankfinanceinthenameofthe Company.CollateralsecurityincludesregisteredequitablemortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelagaviinthenameofAequsSEZPrivateLimited.Theloanisalsosecuredbythecorporateguarantee by Aequs SEZ Private Limited. The Term loan is repayable in 55 monthly instalments. An amount of INR 2.00 million has been adjusted against this loan on account of unamortised financial guarantee expense.

(This space is intentionally left blank) 451Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(e) As at March 31, 2023

(A) Term loans (continued) Aequs Toys Private Limited (ATPL) TermLoanfromHDFCbankwithoutstandingamountofINR109.00million(March31,2022:INRNil)carriesinterestatT-BILL-90DAYS+2.58%p.a.andrepayablein6years6months,monthlyinstalments(Including6monthsmoratorium period)Loanissecuredbyanexclusivechargeonmovablefixedassetsandcurrentassetsofthecompany,exclusivechargeonbuildingownedbyMFREPrivateTrust,personalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChief ExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbytheParentCompanyandMFREPrivateTrust.AnamountofINR35.00millionandINR1.00millionhavebeenadjustedagainstloanonaccountofunamortisedfinancial guarantee expense and unamortised processing fees respectively. Margin money deposit of INR 14.00 million kept as lien for the term loan [refer note 9(iv)].

Aequs Consumer Products Private Limited (ACPPL)

1.HDFCBank:TermloantakenbytheCompanycarriesaninterestat1YRSMCLR+2.50% p.aandisrepayablein60monthlyinstalmentsandissecuredbyhypothecationofplant&machinery,collateralsecurityover parcelofland&building ownedbyM/s.MFREPrivateTrust, thepersonalguaranteeofMr.AravindMelligeriandcorporateguaranteegivenbyM/s.MFREPrivateTrusttotheextentofvalueofthepropertywhichisprovidedascollateral.Theoutstandingbalanceofthe loan as on March 31, 2023 is INR 37.00 million

2.CanaraBank: TermloantakenbytheCompanycarriesaninterestat-PresentRLLR8.30%+3%CRPoverRLLR+0.8%Liquiditypremiumandisrepayablein8years6monthsmonthlyinstalments(Includingrepaymentholidayperiodof18 months) andissecuredbyhypothecationofplant&machinery/equipments,MiscellaneousAssetsandelectricalinstallation,collateralsecurityover parcelofland&buildingownedbyM/sAequsSEZprivatelimited, thepersonalguaranteeofMr.

AravindMelligeriandcorporateguaranteegivenbyM/SAequsSEZPrivateLimitedandtheparentcompanytotheextentofvalueofthepropertywhichisprovidedascollateral.TheoutstandingbalanceoftheloanasonMarch31,2023isINR27.00 million

3. The term loan is reduced by Ind AS adjustments for unamortised financial guarantee received amounting to INR 3.00 million

(B) Current Borrowings (Working capital) Aequs Limited (formerly known as Aequs Private Limited) (AL)

1. OD against third party deposit (FCNR): Over draft facility is secured primarily by Lien on FCNR deposit. Over draft facility carry interest rate of 12.15% p.a. Facility is closed in March, 2023.

2.WorkingcapitalfacilitiesincludesCashCredit,ExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC).Workingcapitalfacilitiesaresecuredprimarilybyhypothecationofstockmeantforexportandbookdebts;further collaterallysecuredbychargeonexistingunincumberedplantandmachineryandparceloflandownedbyAequsSEZPrivateLimited,corporateguaranteeprovidedbyAequsSEZPrivateLimitedandpersonalguaranteeprovidedbyMr.AravindS Melligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompany. Workingcapitalfacilitiesarerepayableondemand.CCcarryinterestratesof3MTBill+2.10%p.a.,PCFCcarriesaninterestof6MonthSOFR+2%p.a.EPCcarry interest rates 8.10% p.a.

AeroStructures Manufacturing India Private Limited (ASMIPL)

1.WorkingcapitalfacilitiestakenbytheCompanyincludesExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC)andCashCredit(CC).Workingcapitalfacilitiesaresecuredbyhypothecationofrawmaterial,semi- finishedgoods,finishedgoods,existingandfuturereceivablesandothercurrentassets.Collateralsecurityincludes,parceloflandownedbyAequsSEZPrivateLimitedandhypothecationchargesonunencumberedplantandmachineriesandotherfixed assetsoftheCompany. PersonalguaranteegivenbyMr.AravindSMelligeri.HDFCbankCCcarryinterestratesof1YearMCLR+1.2%p.a.,PCFCcarriesaninterestof6MonthsSOFR+200bpsp.a.,EPCcarryinterestrates3MTBill+1.23% p.a. Axis bank CC carry interest rates of 3 Month MCLR +1.4% p.a., PCFC carries an interest of 3 Months MCLR+140 bps p.a., EPC carry interest rates 3 Month MCLR +1.4% p.a.

2. Corporate guarantees:

ForHDFCBank:TheParentCompany(totheextentofINR600.00million),AequsSEZPrivateLimited(restrictedtovalueofthepropertyofAequsSEZPvtLtdwhichisprovidedascollateral.i.e.INR40.00million),MFRE(fortheentireloan amount).

For Axis Bank: The Parent Company (for entire loan amount), Aequs SEZ Private Limited (restricted to value of the property i.e. INR 112.40 million of Aequs SEZ Pvt Ltd which is provided as collateral.) Aerostructures Assemblies India Private Limited (AAI)

1. As at the year end, the Company has a total sanction limit of INR 45.00 million which is split between fund based limit of INR 30.00 million and non-fund based limit of INR 15.00 million

2. Working capital facility taken by company from HDFC Bank carries interest rate of 3 month MCLR + 2.25% p.a. Working capital facilities are repayable on demand and are renewable on yearly basis.

3.Workingcapitalfacilitiestakenaresecuredprimarilyby hypothecationofstockandbookdebts;furthercollaterallysecuredbychargeonexistingplantandmachineryandmovableassetsandcorporateguaranteegivenbytheshareholderAequs Limited (formerly known as Aequs Private Limited).

4. The working capital loan is reduced by Ind AS adjustments for unamortised financial guarantee received amounting to INR 1.00 million Aequs Engineered Plastics Private Limited AEPPL) WorkingcapitalfacilitiesincludesCashCredit,ExportPackingCredit(EPC)andPackingCreditinForeignCurrency(PCFC).Workingcapitalfacilitiesareprimarilysecuredbypresentandfuturehypothecationofentirestocksofrawmaterial,stock inprocess,finishedgoods,sparesandreceivablesandothercurrentassets.CollateralsecurityincludesregisteredmortgageonSEZLandsituatedatAequsSEZ,437/A,HattargiVillage,HukkeriTaluk,BelagaviinthenameofAequsSEZPrivate Limited. The loan is also secured by the corporate guarantee by Aequs SEZ Private Limited. CC and EPC carries an interest of REPO+4.85% p.a. while PCFC carries an interest of 6m SOFR + 200 bps.

Aequs Force Consumer Products Private Limited (AFCPPL)

1.WorkingcapitalfacilitiesavailedduringtheyearbytheCompanyarerepayableondemandandincludeExportPackingCredit(EPC)andPre-shipmentCreditinForeignCurrency(PCFC)andCashCredit(CC).Workingcapitalfacilitiesaresecured byhypothecationofinventories,existingandfuturereceivablesandothercurrentassetsandexclusivechargeonplantandmachineriesoftheCompanywithinterest@9.50%p.a.TheloanisalsosecuredbyaCorporateguaranteeprovidedbythe Parent Company. The working capital loan is reduced unamortised financial guarantee received amounting to INR 2.00 million Aequs Toys Private Limited (ATPL)

1.WorkingcapitalfacilitiesincludesCashCredithavingsanctionamountofINR20.00.Workingcapitalfacilitiesarebyanexclusivechargeonmovablefixedassetsandcurrentassets(tradereceivablesandinventories)ofthecompany,exclusive chargeonQuesttowerbuildingownedbyMFREPrivateTrust,personalguaranteeofMr.AravindMelligeri,ExecutiveChairmanandChiefExecutiveOfficeroftheParentCompanyandcorporateguaranteegivenbytheparentcompanyandMFRE Private Trust. Working capital facilities are not utilised as yet March 31, 2023.

2. Overdraft against third party deposit (FCNR): Over draft facility is secured primarily by Lien on FCNR deposit. Over draft facility carry interest rate of 12.15% p.a. Overdraft facility amounting to INR18.00 was utilized and closed in March 2023.

(This space is intentionally left blank) 452Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 15 (i) - Borrowings (continued)

(e) As at March 31, 2023

(B) Current Borrowings (Working capital) (continued) Koppal Toys Molding COE Private Limited (KTMCPL) OD against third party deposit (FCNR): Over draft facility is secured primarily by Lien on FCNR deposit. Over draft facility carry interest rate of 12.15% p.a. Facility is closed in March 2023.

Aequs Consumer Products Private Limited (ACPPL)

1.WorkingcapitalfacilitiestakenbytheCompanyincludesLetterofCreditandCashCredit(CC).Workingcapitalfacilitiesaresecuredbyhypothecationofrawmaterial,semi-finishedgoods,finishedgoods,existingandfuturereceivablesandother currentassets.Collateralsecurityincludes,parceloflandownedbyM/s.MFREPrivateTrustandhypothecationchargesonunencumberedplantandmachineriesandotherfixedassetsoftheCompany. PersonalguaranteegivenbyMr.Aravind Melligeri. CC carries interest @ 3MT bill+4.10% p.a.

2.WorkingcapitalfacilitiestakenbytheCompanyfromCANARABankincludesLetterofCreditandCashCredit(CC).WorkingcapitalfacilitiesaresecuredbyhypothecationProposedstockandbookdebts.Collateralsecurityincludes,parcelof landownedbyM/s.MFREPrivateTrustandhypothecationchargesonunencumberedplantandmachineriesandotherfixedassetsoftheCompany. PersonalguaranteegivenbyMr.AravindMelligeri.Theseworkingcapitalfacilitiesarenotyet utilised.

3. Overdraft against third party deposit (FCNR): Overdraft facility is secured primarily by Lien on FCNR deposit. Overdraft facility carry interest rate of 12.15% p.a. This facility is closed at March 31, 2023.

Note 15 (i) - Borrowings (continued)

(c) As at March 31, 2023 (continued)

(C) Loans from related parties Aequs Limited (formerly known as Aequs Private Limited) (AL) Loan from related party are unsecured and repayable on demand, availed from Aequs SEZ Private Limited amounting to Nil. These loans carry an interest rate of 12% p.a. payable monthly.

Aequs Aerospace LLC (AALLC) Loan taken from Melligeri Investment LLC(MILLC) amounting to INR 16.00 carries interest rate of 13% p.a & is repayable on demand Aequs Aerospace BV (AABV) Loan taken from Aequs Inc amounting to INR 172.00 carries interest rate of 12.5%p.a & is repayable on demand.

Aequs Consumer Products Private Limited (ACPPL) Loan from related party pertains to unsecured loan availed by the company from Aequs SEZ Private Limited Nil with interest @ 12% p.a. These loans are repayable on demand.

Aequs Engineered Plastics Private Limited (AEPPL) Loan from related party are unsecured and repayable on demand, availed from Aequs SEZ Private Limited amounting to Nil. These loans carry an interest rate of 12% p.a. payable monthly.

Aequs Force Consumer Products Private Limited (AFCPPL) Loan from related party are unsecured and repayable on demand availed from Aequs SEZ Private Limited amounting to Nil. These loans carry an interest rate of 12% p.a. payable monthly.

(D) Details of quarterly statements of current assets filed by the company with the bank and reconciliation with the books of accounts for year ended March 31, 2023

1. Inventories Quarter Name of bankParticulars of Securities Provided Amount as per books Amount as reported Amount of Reason for of account (net of in the quarterly differencediscrepancies provision) return/ statements Jun-22 Inventories 2 ,053.39 2,257.77 ( 204.38)Refer below Note Sep-22 Axis Bank & Inventories 2 ,099.55 2,375.46 ( 275.91) Dec-22 HDFC Bank Inventories 2 ,219.56 2,516.40 ( 296.84) Mar-23 Inventories 2 ,569.35 2,649.26 ( 79.91)

(a) As per the sanction letter, the Company needs to exclude obsolete inventories and those inventories aged more than 90 days. However, the Company has excluded inventories in line with the provisioning policy followed by the Company.

(b) The amount declared for the quarter ending March 2023 in the stock statement was before the conclusion of audit. The closing value of inventory was revised due to changes in inventorisation of overheads.

2. Trade Receivables Quarter Name of bank Particulars of Securities Provided Amount as per books Amount as reported Amount of Reason for of account in the quarterly difference discrepancies return/ statements Jun-22 Trade receivables 1 ,034.17 987.03 47.14 Refer notes below Sep-22 Trade receivables 1 ,197.00 1,122.20 74.80 Various Banks Dec-22 Trade receivables 1 ,198.29 1,127.09 71.20 Mar-23 Trade receivables 1 ,100.13 1,071.44 28.69

(a) Amounts reported to banks are excluding balances with related parties, foreign exchange adjustments, loss allowance on trade receivables, net of advances, provision for unbilled revenue and certain adjustments made post submission of statement to

(b) The above amounts pertain to entities in the Group that have availed working capital borrowings in India.

(E) Loan covenants Under the terms of the borrowing facilities with various banks, the below entities of the group are required to comply with following financial covenants :

AL ASMIPL AAI AFCPPL ATPL ACPPL Total Net Worth (TNW) > INR 275 > INR 1742 INR > 55 INR > 400 INR > 480 INR > 133 Total Outside Liabilities (TOL)/ Adjusted TNW < 2 < 3.5 < 3 < 3 < 2 < 3 Interest Coverage Ratio (ICOR) > 3 - - - > 1.5 - Debt Service Coverage Ratio (DSCR) - > 2.5 - - > 1.25 > 1.5 Compliance Default in Default in Complied with the Default in compliance Default in compliance Default in compliance compliance of compliance of above covenants. of TNW, of DSCR and ICOR of DSCR Interest coverage TNW, DSCR, (TOL)/ Total TNW ratio Current ratio

Notes:

(i) There are no restrictive covenants on Parent Company’s share capital.

(ii) Breaches in complying with the financial covenants would permit the bank to call back the loans. However, the Group continues to classify the loans as non-current based on its original repayment schedule as in the view of management, the breach is not material and the bank has not demanded repayment of the loan before the date of approval of these financial statements.

(This space is intentionally left blank) 453Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Note 15 (ii) - Other financial liabilities Non-current:

Guarantee liability 61.08 5.13 64.75 6.38 6.57

61.08 5.13 64.75 6.38 6.57

Current:

Capital creditors 302.79 245.27 195.74 356.47 128.70 Guarantee liability 3.85 4.09 4.93 5.61 4.77 Dues to related parties (refer note 35) 2.10 1.92 2.06 - 0.78 Employees related liabilities 177.46 113.83 157.43 133.92 130.25 Other financial liabilities 55.69 4.87 40.09 - -

541.89 369.98 400.25 496.00 264.50 Note 15 (iii) - Trade payables

Current:

Trade payables - Dues to micro enterprises and small enterprises ('MSME') (refer note 38) 65.01 32.19 65.70 9.99 1.63 - Dues to related parties (refer note 35) 330.12 142.33 300.71 155.89 311.35 - Other trade payables 2,536.38 2,152.48 1,942.46 1,859.31 1,944.64 2,931.51 2,327.00 2,308.87 2,025.19 2,257.62 Ageing of Trade payables as on September 30, 2025 Particulars Outstanding for following periods from due date of payment Total Not due Less than 1 1-2 Years 2-3 Years More than year 3 years

(i) Undisputed dues -MSME - 6 4.95 0.06 - - 65.01

(ii) Undisputed dues -Others 1,721.30 9 43.48 62.86 34.32 40.16 2,802.12 Unbilled 64.38 - - - - 64.38 1,785.68 1 ,008.43 62.92 34.32 40.16 2,931.51 Ageing of Trade payables as on September 30, 2024 Particulars Outstanding for following periods from due date of payment Total Not due Less than 1 1-2 Years 2-3 Years More than year 3 years

(i) Undisputed dues -MSME - 3 2.14 0.06 - - 32.19

(ii) Undisputed dues -Others 1,276.92 864.20 47.37 2.39 34.79 2,225.67 Unbilled 69.14 - - - - 69.14 1,346.06 8 96.34 47.42 2.39 34.79 2,327.00 Ageing of Trade payables as on March 31, 2025 Particulars Outstanding for following periods from due date of payment Total Not due Less than 1 1-2 Years 2-3 Years More than year 3 years

(i) Undisputed dues -MSME 23.08 4 2.59 0.03 - - 65.70

(ii) Undisputed dues -Others 264.52 8 13.07 57.55 5.06 33.68 1,173.88 Unbilled 1,069.29 - - - - 1,069.29 1,356.89 8 55.66 57.58 5.06 33.68 2,308.87 Ageing of Trade payables as on March 31, 2024 Particulars Outstanding for following periods from due date of payment Total Not due Less than 1 1-2 Years 2-3 Years More than year 3 years

(i) Undisputed dues -MSME 0 .10 9.89 - - - 9 .99

(ii) Undisputed dues -Others 547.75 1 ,167.71 49.39 66.90 34.41 1,866.16 Unbilled 149.04 - - - - 149.04

696.89 1 ,177.60 49.39 66.90 34.41 2,025.19 Ageing of Trade payables as on March 31, 2023 Particulars Outstanding for following periods from due date of payment Total Not due Less than 1 1-2 Years 2-3 Years More than year 3 years

(i) Undisputed dues -MSME 1 .01 0.62 - - - 1 .63

(ii) Undisputed dues -Others 167.58 1 ,488.87 149.88 49.10 141.11 1,996.54 Unbilled 259.45 - - - - 259.45

428.04 1 ,489.49 149.88 49.10 141.11 2,257.62 As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Note 16 - Other liabilities Non current Statutory dues payable - - - - 29.45 Deferred government grant 42.01 - 45.00 - -

42.01 - 45.00 - 29.45 Current Statutory dues payable 159.88 197.24 142.14 188.88 241.06 Deferred government grant 8.33 - 10.69 - - Provision for income tax - - - - 8.83 Deferred income - - - 2.31 1.11 Employees related liability 0.24 - - - - Others - 5.09 - 0.69 44.49

168.45 202.33 152.83 191.88 295.49 454Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 17 - Provision for employee benefits As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Non-Current Provision for gratuity 117.64 96.01 117.63 95.77 78.73 Provision for other retirement benefits 53.11 33.73 44.16 30.81 31.44

170.75 129.74 161.79 126.58 110.17 Current Provision for gratuity 11.58 9.59 4.23 4.57 5.12 Provision for leave obligation 69.13 56.04 61.34 50.26 40.08

80.71 65.63 65.57 54.83 45.20

(i) Leave obligation The leave obligations cover the Group's liability for earned leave.

Theamountoftheprovisionof₹69.13(September30,2024:INR56.04,March31,2025:₹61.34,March31,2024:₹50.26,March31,2023:₹40.08)ispresentedascurrent.However,basedon past experience, the Group does not expect all employees to take the full amount of accrued leave or require payment within the next 12 months.

As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Leave obligation not expected to settled within next 12 months 46.67 35.82 46.77 32.90 23.60

(ii) Defined contribution plans India TheGroupinIndia hascertaindefinedcontributionplans.ContributionsaremadetoprovidentfundinIndiaforemployeesattherateof12%ofbasicsalaryasperregulations.Thecontributionsare madetoregisteredprovidentfundadministeredbythegovernment.TheobligationoftheGroupislimitedtotheamountcontributedandithasnofurthercontractualnoranyconstructiveobligation.

Theexpenserecognisedduringtheperiod/yeartowardsdefinedcontributionplanis₹99.99(September30,2024:INR78.85March31,2025:₹169.34,March31,2024:₹143.40,March31,2023: ₹121.69).

United States of America TheGroupmaintainsadefinedcontributionemployeeretirementplanthroughitsPEOInsperity,pursuanttoSection401(a)oftheInternalRevenueCode,whichincludesa401(k)featurewhich enablestheemployeetomakeapre-taxorpost-tax(ROTH) salaryreductioncontributiontotheplan.TheCompanyhasamatchofemployeecontributionsof25%ofemployeecontributionupto 1%ofeligiblecompensation.Substantiallyallemployeeswhohavecompletedsixmonthsofserviceareeligibletoparticipateintheplan.TheCompanydidnotmakeadiscretionarycontributionfor the period ended September 30, 2025, September 30, 2024 and year ended March 31, 2025, March 31, 2024 and March 31, 2023.

(iii) Defined benefit obligations Gratuity India TheGroupprovidesforgratuityforemployeesinIndiaasperthePaymentofGratuityAct,1972.Employeeswhoareincontinuousservice foraperiodof5yearsareeligibleforgratuity.The amountofGratuitypayableonretirement/terminationistheemployeeslastdrawnbasicsalarypermonthcomputedproportionatelyfor15dayssalarymultipliedforthenumberofyearsofservice.

The Gratuity plan is a funded plan and Group makes contribution to recognised funds in India.

TheGroupmakesannualcontributionfortheGratuityplantoanInsuranceCompany.Suchcontributionsarerecognisedasplanassets.TheGroupmakecontributiontotheplannedassetsbasedon theexpectedpayout.FinalliabilityisactuariallyvaluedandrecognisedinthebooksasattheendofeachyearbytheGroup.Uponactuarialvaluationattheyearend,anyresultantdifference between the liability and fair value of the fund is recognised in the books of accounts as liability.

France TheFrenchpensionsystemisoperatedona“payasyougo”basis.EachemployeeisentitledtoreceiveabasicpensionfromtheSocialSecurityplusacomplementarypensionfromdefined contribution schemes ARRCO and AGIRC. Moreover, retiring allowances (lump sums) must, by law be paid by the employer when employees retire.

The allowances to be paid to Group’s employees are defined by the Collective Bargaining Agreement of the Metallurgical Industry.

Allpermanentemployeesarebeingcoveredonthisscheme.NormalRetirementAgeinFranceis62but41.50yearsofemploymentisrequired.BenefitrightsarenotvestedbeforeNormal Retirement Age.

Thepensionablesalaryisequaltotheaverageoverthelast12monthsofthegrosspaidsalaries.Shouldanemployeewantstoretireathis/herowninitiativetheallowanceissubjecttosocial charges.

This retiring allowances scheme is not externally funded through an insurance contract. (This space is intentionally left blank) 455Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 17 - Provision for employee benefits (continued) Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(a) Total amount recognised in statement of profit or loss Current service cost 8.75 6.79 24.00 17.64 16.51 Interest on defined obligation 2.75 2.12 7.54 6.09 3.49 Shared service cost recovered - - - (1.98) (2.11) Net actuarial (gain) / loss recognized during the period / year - - (4.55) (0.69) (0.34) Total amount recognised in statement of profit or loss (A) 11.50 8.91 26.99 21.06 17.55

(b) Total amount recognised in other comprehensive income Actuarial (gains)/losses arising from changes in - return on plan assets - (0.19) (0.01) - demographic assumptions (0.03) 0.15 3.38 3.17 (0.21) - financial assumptions (0.03) (9.39) 3.29 3.40 (3.21) - experience adjustments 0.10 9.27 (11.22) (4.95) (6.14) Total amount recognised in other comprehensive income (B) 0.04 0.03 (4.55) 1.43 (9.57) Total amount recognised in statement of profit and loss and other 11.54 8.94 22.44 22.49 7.98 comprehensive income (A+B)

(c) Changes in the defined benefit obligation during the period / year Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Obligations as at the beginning of the period/year 121.86 100.03 100.03 83.54 80.06 Current service cost 8.75 6.79 24.00 17.64 16.51 Interest cost 2.75 2.12 7.54 8.06 3.49 Benefits paid (3.38) (3.06) (5.99) (9.67) (5.11) Settlements - - (0.98) (2.17) Liabilities (transferred) / assumed (0.49) - 0.83 0.72 1.10 Acquisition / divestiture - - (0.02) (0.78) Remeasurement (gains) / losses - - (0.88) - - arising from changes in demographic assumptions. (0.03) 0.15 3.38 3.17 (0.21) - arising from changes in financial assumptions. (0.03) (9.39) 3.29 3.40 (3.21) - arising from changes in experience adjustments. 0.10 9.27 (11.22) (4.95) (6.14) Defined benefit obligation as the end of the period/year 1 29.53 1 05.91 1 21.86 1 00.03 8 3.54

(d) Change in fair value of plan assets September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Fair value of plan assets at the beginning of the year 0.31 0.31 0.31 0.31 0.17 Expected return on plan assets - - - 0.04 (0.01) Contributions - - 5.90 2.32 2.75 Benefit payments from plan assets - - (5.90) (2.37) (2.61) Actuarial Gain / (Loss) on plan assets - - - 0.01 0.01 Fair value of plan assets at the end of the period/year 0.31 0.31 0.31 0.31 0.31

(e) Net (asset) / liability Present value of unfunded defined benefit obligation 129.53 105.91 121.55 100.03 83.54 Fair value of plan assets (0.31) (0.31) 0.31 0.31 0.31 Net defined benefit liability/(asset) recognized in balance sheet 129.22 105.60 121.86 100.34 83.85

(f) Classification Current 11.58 9.59 4.23 4.57 5.18 Non current 117.64 96.01 117.63 95.77 78.87

129.22 105.60 121.86 100.34 84.05 September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(g) Investment details of plan assets Pooled asset with an insurance company 0 .31 0 .31 0 .31 0 .31 0 .31 Total 0.31 0.31 0.31 0.31 0.31

(h) Actual return on plan assets - - 0.05 0.04 0.02

(i) Expected contribution in next year - - - 1.67 2.19 - - 0.05 1.71 2.21 456Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 17 - Provision for employee benefits (continued) Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Actuarial assumptions September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Significant actuarial assumptions Discount rate per annum 6.85%-7.05% 6.85%-7.1% 6.85%-7.05% 7.15%-7.5% 7.45%-7.5% Salary escalation rate per annum 10.00% 10.00% 10.00% 10.00% 10.00% Other actuarial assumptions 9% to 18% at 21 to 30 9% to 18% at 21 to 9% to 18% at 21 to 9% to 18% at 21 to 30 periods age and reducing 30 years age and 30 years age and period / years age and to 0% to 8% at older reducing to 0% to reducing to 0% to 0%-18% on a Attrition rate reducing to 0% to 8% at ages according to 8% at older ages 8% at older ages graduated scale.

older ages according to graduated scale. according to according to graduated scale. graduated scale. graduated scale.

Retirement age 58 58 58 58 58 Assumptions regarding mortality are based on published rates under the Indian Assured Lives Mortality (2012-14) table.

Sensitivity analysis

The sensitivity of the defined benefit obligation to changes in the weighted principal assumptions is as under:

Changes in assumption September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Discount rate Defined benefit obligation (DBO) on increase in 50 bps 122.47 98.85 1 15.49 95.54 80.61 Discount rate +50 basis points impact (%) -5.23% -6.39% -5.23% -4.43% -3.87% Defined benefit obligation (DBO) on decrease in 50 bps 139.40 111.98 1 32.11 107.85 88.83 Discount rate -50 basis points impact (%) 7.88% 6.04% 7.88% 7.89% 5.94% Salary increase rate Defined benefit obligation (DBO) on increase in 50 bps 138.47 111.31 1 31.24 107.26 88.52 Impact of increase in 50 bps on DBO 7.16% 5.41% 7.16% 7.30% 5.57% Defined benefit obligation (DBO) on decrease in 50 bps 123.14 99.36 1 16.13 95.97 80.77 Impact of decrease in 50 bps on DBO -4.71% -5.90% -4.71% -4.00% -3.67% Sensitivityanalysisforeachsignificantactuarialassumptionsnamelydiscountrateandsalaryassumptionshavebeenshowninthetableaboveattheendofthereportingperiod,showinghowthe defined benefit obligation would have been affected by the changes.

Themethodusedtocalculatetheliabilityinthesescenariosisbykeepingalltheotherparametersandthedatasameasinthebaseliabilitycalculationexcepttheparameterstobestressed.There have been no changes from the previous periods in the methods and assumptions used in preparing the sensitivity analyses.

The mortality and attrition does not have a significant impact on the liability hence are not considered as significant actuarial assumption for the purpose of sensitivity analysis Maturity profile of the defined benefit obligations Expected future cashflows (in million) [undiscounted] September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Less than one year 5.00 4.53 5.00 5.08 5.66 Between one and five year 25.84 21.94 24.23 23.26 25.00 After five year 370.69 314.46 347.39 267.44 199.00 Total 401.53 340.93 376.62 295.78 229.66 Weighted average duration of the defined benefit obligation in years 11.25 11.25 11.25 11.11 11.11 Risk exposure Through its defined benefit plans, the Group is exposed to number of risks, the most significant of which are detailed below:

(i) Market risk (discount rate) Marketriskisacollectivetermforrisksthatarerelatedtothechangesandfluctuationsofthefinancialmarkets.Thediscountratereflectsthetimevalueofmoney.Anincreaseindiscountrateleads todecreaseinDefinedBenefitObligationoftheplanbenefitsandviceversa.Thisassumptiondependsontheyieldsonthecorporate/governmentbondsandhencethevaluationofliabilityis exposed to fluctuations in the yields as at the valuation date.

(ii) Longevity risk Theimpactoflongevityriskwilldependonwhetherthebenefitsarepaidbeforeretirementageorafter.Typicallyforthebenefitspaidonorbeforetheretirementage,thelongevityriskisnotvery material.

(iii) Annual risk Salary increase assumption Actual salary increase that are higher than the assumed salary escalation, will result in increase to the obligation at a rate that is higher than expected.

Attrition/withdrawal assumption Ifactualwithdrawalratesarehigherthanassumedwithdrawalrateassumption,thenthebenefitswillbepaidearlierthanexpected.Theimpactofthiswilldependonwhetherthebenefitsarevested as at the resignation date.

457Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 18 - Revenue from operations Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Revenue from contracts with customers Sale of manufactured goods 5,185.25 4,451.10 8,949.54 9,401.18 7,901.43 Sale of services 16.86 15.05 30.09 10.74 13.29 5,202.11 4,466.15 8,979.63 9,411.92 7,914.72 Other operating income Sale of scrap 169.48 123.58 266.43 236.62 194.63 Others - - 2.20 11.97

169.48 123.58 266.43 238.82 206.60 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32

(i) Aggregate amount of transaction price allocated towards performance 312.70 - 58.14 42.45 49.48 obligations unfulfilled as at reporting date.

(ii) Refer note 34 for geographical disaggregation of revenue.

(iii)Tradereceivablesarenon-interestbearingandgenerallycarrycreditperiodof0to60days.TheseincludeunbilledreceivableswhichprimarilyrelatetotheGroup’srightstoconsiderationfor work completed but not billed at the reporting date.

Note 19 - Other income Government grant 5.34 - 94.96 - 1.60 Liabilities no longer required written back 8.93 11.30 21.07 29.97 58.12 Dividend income - - - - 12.25 Gain on derecognition of lease - 19.27 18.59 - 18.84 Net gain on disposal of property, plant and equipment - - 0.42 10.24 - Exchange difference (other than borrowings) 191.00 46.81 52.27 33.36 95.92 Interest income 49.18 50.07 89.12 81.91 12.86 Unwinding of discount on security deposit 10.06 10.04 19.72 17.27 19.51 Financial guarantee income 6.56 1.95 9.46 6.06 9.61 Gain on mutual funds - 17.09 23.74 3.58 - Miscellaneous Income 12.79 8.80 16.72 49.91 55.36

283.86 165.33 346.07 232.30 284.07

Note:

Governmentgrantincomeincludesincomewhichhasbeenrecognisedonaccountofcapitalsubsidyof₹5.34(NilforperiodendedSeptember30,2024,₹32.05foryearendedMarch31,2025,Nil foryearendedMarch31,2024,NilforyearendedMarch31,2023)towardsinvestmentmadeinproperty,plant,andequipmentinpreviousfinancialyearsandincomeofNil(Nilforperiodended September30,2024,₹62.91foryearendedMarch31,2025,NilforyearendedMarch31,2024,NilforyearendedMarch31,2023)recognisedonaccountofreimbursementofrentalexpenses incurredinpreviousfinancialyears,undertheKarnatakaGovernmentscheme.ThereisacorrespondingGovernmentgrantreceivablerecognisedinotherfinancialasset₹76.23(September30,2024:

Nil;March31,2025:91.80;March31,2024:Nil;March31,2023:Nil)anddeferredgrantincomeof₹50.34(September30,2024:Nil;March31,2025:55.69;March31,2024:Nil;March31, 2023: Nil).

Note 20 - Cost of materials consumed Raw material consumed Opening stock 2,051.54 1,684.37 1,684.37 1,392.13 850.00

Less: Movement in provision for slow moving inventory (164.42) (169.55) (169.55) (135.44) -

Add: Purchases during the period / year 2,486.04 2,656.72 4,454.90 4,648.85 4,704.05

Less: Closing stock 2,233.83 2,105.99 2,051.54 1,684.37 1,392.13

Less: Movement in provision for slow moving inventory (189.61) (219.64) (164.42) (169.55) (7.03) Cost of materials consumed 2,328.94 2,285.19 4,082.60 4,390.72 4,168.95 Note 21 - Change in inventories of work-in-progress and finished goods Inventory at the end of the year (a) Work-in-progress 1,315.01 1,180.24 1,211.12 1,140.00 919.56 Finished goods 1,222.48 1,197.98 1,095.98 856.66 841.76 2,537.49 2,378.22 2,307.10 1,996.66 1,761.32

Add: Inventories pertaining to entities acquired (259.19) (189.85) (15.13) - - Inventory at the beginning of the year (b) Work-in-progress 1,211.12 1,140.00 1,140.00 919.56 681.22 Finished goods 1,095.98 856.66 856.66 841.76 687.72 2,307.10 1,996.66 1,996.66 1,761.32 1,368.94

Less: Movement in provision for slow moving inventory (218.23) (82.01) (136.22) 37.98 (25.82) ( 189.43) ( 273.72) ( 189.35) ( 273.32) ( 366.56) Exchange difference 35.08 (41.26) 28.75 48.65 17.32 Change in inventories of work -in-progress and finished goods (b-a) ( 154.35) ( 314.98) ( 160.60) ( 224.67) ( 349.24) Note 22 - Employee benefit expenses Salaries, wages and bonus 759.88 619.12 1,295.49 1,164.14 1,196.94 Contribution to provident and other funds 99.99 78.85 169.34 143.40 121.69 Employee stock option expense (refer note 13B) 10.25 11.42 8.77 20.68 24.05 Leave compensation 6.16 5.54 8.84 11.26 6.66 Gratuity 11.50 8.91 31.52 25.02 20.86 Staff welfare expenses 39.79 38.28 73.45 69.58 76.19

927.57 762.12 1,587.41 1,434.08 1,446.39 458Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Note 23 - Other Expenses Consumption of stores and spare parts 282.89 227.83 475.02 441.98 347.78 Subcontracting expenses 727.06 601.55 1,183.82 1,186.03 1,023.85 Insurance 34.84 31.58 60.18 59.00 59.09 Power and fuel 119.91 129.26 241.13 294.49 254.67 Repairs and maintenance Machinery 69.87 57.22 115.74 106.20 113.09 Building 31.71 36.71 73.73 74.02 65.75 Others 80.69 65.43 147.37 85.00 102.78 Legal and professional fees 107.24 69.59 180.52 133.46 108.30 Payment to auditors 3.56 3.63 9.24 9.40 8.26 Rental charges 22.21 19.27 39.47 36.27 41.62 Printing and stationery 2.86 3.00 5.80 5.78 5.86 Freight & forwarding 65.75 68.97 148.40 114.58 91.49 Rates and taxes 46.17 19.19 50.76 53.96 33.13 Travelling and conveyance 36.44 34.97 76.94 29.35 47.65 Communication 7.84 10.82 20.02 38.13 11.66 Advertising and sales promotion 11.62 20.99 40.04 32.48 11.56 Royalty fee - - - - 70.24 Bank charges 9.30 28.96 54.33 53.53 39.70 Loss on disposal of property, plant and equipment/investment property (net) 5.94 - 3.12 10.40 4.76 Expenditure on corporate social responsibility 4.22 2.21 4.22 - - Net foreign exchange loss (other than borrowings) - - - - 0.54 Share issue expenses of subsidiaries 2.50 3.93 3.68 - 13.15 Provision for doubtful advances & advances written off 8.17 1.26 8.07 21.86 - Miscellaneous expenses 29.18 17.14 57.27 27.26 24.56 1,709.97 1,453.51 2,998.87 2,813.18 2,479.49 A. Details of corporate social responsibility

(i) Amount required to be spent by the company during the period / year 4.22 2.21 4.22 - -

(ii) Amount approved by the board to be spent during the period / year - 4.22 4.22 - -

(iii) Amount spent during the period / year

(a) Construction/ acquisition of any asset - - - - -

(b) On purposes other than (a) above 2.28 - 4.22 - -

(iv) Details of related party transactions - - - - -

(v) Nature of activities Promotion of - Promotion of - - education education

(vi) Shortfall at the end of the period / year 1.94 2.21 - - - Note 24 - Finance cost Interest expense on working capital borrowings 64.08 63.75 130.50 143.35 100.83 Interest expense on term loan 33.37 32.51 66.24 70.73 83.03 Interest expense - others 63.69 22.13 43.37 61.98 56.42 Exchange differences (on borrowings) 57.98 7.02 57.38 43.60 145.73 Financial guarantee expense 6.15 9.48 14.58 14.64 20.03 Interest expense on lease liabilities 132.24 143.70 276.94 303.76 240.03

357.51 278.59 589.01 638.06 646.07 Note 25 - Depreciation and amortisation expense Depreciation of property, plant and equipment* 254.68 183.66 368.98 382.28 337.48 Amortisation of intangible assets** 16.41 21.87 40.22 50.66 43.90 Depreciation on investment property - - - 0.02 24.87 Depreciation on right-of-use assets*** 300.46 323.67 624.86 643.89 588.91

571.55 529.20 1,034.06 1,076.85 995.16 * Refer Note 4 for further details on property, plant and equipment ** Refer Note 6 for further details on intangible assets *** Refer Note 5 for further details on right-of-use assets Note 26 - Exceptional items loss/(gain) Impairment loss on goodwill - 482.65 482.65 - - Impairment loss on receivable from related parties - - - - 0.57 Impairment loss on loans receivable from related parties - - - - 6.79 Gain on sale of investment property - - - (186.48) - - 482.65 482.65 (186.48) 7.36

(i) During the year ended March 31, 2025, the Group has recognised an impairment on goodwill of INR 482.65, allocated towards AFCPPL.

(ii)InMay2023,SCIDuChampDePivones,asubsidiarycompanyhassoldtheinvestmentpropertytoanoutsidepartyforaconsiderationofINR246.00andrecognisedagainofINR186.48on sale of investment property.

(iii)DuringtheyearendedMarch31,2023,theGrouphasrecognisedanimpairmentofINR6.79ontheloansreceivablefromAequsRajasPrivateLimited,alongwithinterestaccruedthereon,based on their future cashflow forecasts.

(iv)GiventheuncertaintysurroundingtherealisationofamountsrecoverablefromAutomotiveEndSolutionPrivateLimited(AESPL),theCompanyhadrecognisedanimpairmentlossofINR0.57 for the year ended March 31, 2023.

459Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 27 - Fair value measurement Financial instruments by category Fair value Classification As at As at As at March As at March As at March hierarchy September 30, 2025 September 30, 2024 31, 2025 31, 2024 31, 2023 Amount Amount Amount Amount Amount Financial assets Non current investments Level 2 FVTPL 0.94 0.86 0.85 0.83 0.81 Current investments Level 1 FVTPL - 371.28 - 297.15 - Trade receivables Amortised cost 1,812.56 1,621.85 1,566.04 1,368.85 1,071.28 Cash and cash equivalents Amortised cost 571.93 657.17 609.43 792.74 512.87 Bank balances other than above Amortised cost 226.31 754.75 188.48 1,727.01 60.81 Other financial assets Amortised cost 904.41 446.65 834.96 409.67 370.62 Total financial assets 3 ,516.15 3 ,852.56 3 ,199.76 4 ,596.25 2 ,016.39 Financial liabilities Borrowings Amortised cost 5,335.11 3,847.86 4,370.62 2,918.81 3,461.39 Lease liabilities Amortised cost 3,353.37 3,964.09 3,479.85 4,070.50 3,897.86 Trade payables Amortised cost 2,931.51 2,327.00 2,308.87 2,025.19 2,257.62 Other financial liabilities Amortised cost 602.97 375.11 465.00 502.38 271.07 Total financial liabilities 1 2,222.96 1 0,514.06 1 0,624.34 9 ,516.88 9 ,887.94

(i) Fair value hierarchy

This section explains the judgements and estimates made in determining the fair values of the financial instruments that are:

(a) recognised and measured at fair value.

(b) recognised and measured at amortised cost and for which fair values are disclosed in the financial statements.

Toprovideanindicationaboutthereliabilityoftheinputsusedindeterminingfairvalue,theGrouphasclassifieditsfinancialinstrumentsintothethreelevelsprescribedunderthe accounting standard. An explanation of each level follows underneath the table:

Level 1: Level 1 hierarchy includes financial instruments measured using quoted prices.

Level2:Thefairvalueoffinancialinstrumentsthatarenottradedinanactivemarket(derivativemainlyforwardcontract)isdeterminedusingvaluationtechniqueswhichmaximisethe useofobservablemarketdataandrelyaslittleaspossibleonentity-specificestimates.Ifallsignificantinputsrequiredtofairvalueaninstrumentareobservable,theinstrumentisincluded in level 2.

(ii) Fair value of financial assets and liabilities measured at amortised cost Thecarryingamountsoftradereceivables,tradepayables,capitalcreditors,cashandcashequivalentsandotherbankbalances,loans,otherfinancialassets,andotherfinancialliabilities are considered to be the same as their fair values, due to their short-term nature.

The fair values for interest free security deposits were calculated based on cash flows discounted using a risk free rate of interest.

The fair values of non-current borrowings are based on discounted cash flows using a current borrowing rate.

Theleaseliabilitiesarediscountedusingtheinterestrateimplicitinthelease.Iftheratecannotbereadilydetermined,asinthecaseofleaseofbuildings,theGroup'sincremental borrowing rate is used.

For financial assets and financial liabilities that are measured at amortised cost, the carrying amounts are equal to fair values.

(iii) Significant estimates Thefairvalueoffinancialinstrumentsthatarenottradedinanactivemarketisdeterminedusingvaluationtechnique.TheGroupusesitsjudgementtoselectavarietyofmethodsand makes assumptions that are mainly based on market conditions existing at the end of each reporting period.

(This space is intentionally left blank) 460Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 28 - Financial risk management TheGroup'sbusinessactivitiesexposesittoavarietyoffinancialriskssuchasliquidityrisk,creditriskandmarketrisk.TheGroup’sseniormanagementunderthesupervisionoftheBoardof DirectorshastheoverallresponsibilityforestablishingandgoverningtheGroup’sriskmanagementandhaveestablishedpoliciestoidentifyandanalysetherisksfacedbytheGroup.Theyhelpin identification,measurement,mitigationandreportingallrisksassociatedwiththeactivitiesoftheGroup.Theserisksareidentifiedonacontinuousbasisandassessesfortheimpactonthefinancial performance. The below table broadly summarises the sources of financial risk to which the Group is exposed to and how the Group manages the risk.

Financial risk management Exposure arising from Measurement Management Credit risk Cashandcashequivalents,tradereceivablesandAgeing analysis Credit ratings Diversification of bank deposits, financial assets measured at amortised cost. Customerscreditanalysisandmonitoring of credit limits Borrowings,securitydepositsreceivedandotherRolling cash flow forecasts Availability of borrowings facilities Liquidity risk liabilities.

Market risk - Foreign exchange Future commercial transactions recognisedCash flow forecasting sensitivity analysis Natural hedging for receivables and financialassetsandliabilitiesnotdenominatedin payables.

Indian rupee.

Market risk - Interest rate risk Long-termandshort-termborrowingsatvariableSensitivity analysis Maintaining a judicious mix of variable rates. and fixed rate debt A Credit risk Creditriskisariskwherethecounterpartywillnotmeetitsobligationsunderafinancialinstrumentleadingtoafinancialloss.Creditriskarisesfromcashandcashequivalentsanddepositswith banks, as well as credit exposures to customers including outstanding receivables, other receivables and loans and deposits.

(i) Credit risk management CreditriskreferstoariskthatacounterpartywilldefaultonitscontractualobligationsresultinginfinanciallosstotheGroup.TheGroupusuallydealswithcreditworthycounterpartiesasameansof mitigating the risk of financial loss from defaults. The exposure is continuously monitored.

(ii) Provision for expected credit losses.

The Group’s financial assets mainly comprise of investments, trade receivables, deposits with bank, loans & lease deposits. The assessment of ECL is done as follows:

1) Loans and Deposits:

LoansandDepositshavingnegligibleornilriskbasedonpasthistoryofdefaultsandreasonableforwardlookinginformation.Loansanddepositscomprisesofmainlyrefundablesecuritydeposits madeonbuildings(leasedpremises).Sincetheseareassetswithnilrisk,theexpectedprobabilityofdefaultis"Nil%"andhencenoprovisionforexpectedcreditlossesaremadeinthefinancial statements.

2) Deposits with bank:

They are considered to be having negligible risk or nil risk, as they are maintained with banks having strong credit ratings and the period of such deposits is generally not exceeding one year

3) Trade receivables and other dues from related parties Nosignificantexpectedcreditlossprovisionhasbeencreatedfortradereceivables.Further,receivablesareexpectedtobecollectedconsideringthepasttrendofverylimiteddefaultsandthatthe balances are not significantly aged. Full provision is made for balances that management believes are credit impaired.

When determining whetherthe creditrisk ofa financialasset has increased significantlysince initialrecognitionand when estimatingECLs, the Group considers reasonable and supportable informationthatisrelevantandavailablewithoutunduecostoreffort.Thisincludesbothquantitativeandqualitativeinformationandanalysis,basedontheGroup’shistoricalexperienceandinformed credit assessment, that includes forward-looking information.

(This space is intentionally left blank) 461Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 28 - Financial risk management (continued) A Credit risk (continued) Reconciliation of loss allowance provision - Trade receivables As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Balance at the beginning of the period / year 30.44 26.28 26.28 40.54 35.84 Charge for the period / year 2.26 0.04 4.16 14.63 8.54 Utilisation/ reversal in loss allowance (2.58) (0.34) - (28.89) (3.84) Balance at the end of the period / year 30.12 25.98 30.44 26.28 40.54 B Liquidity risk Liquidityriskisariskwhereanentitywillencounterdifficultyinmeetingobligationsassociatedwithfinancialliabilitiesthataresettledbydeliveringcashoranotherfinancialasset.Prudentliquidity riskmanagementimpliesmaintainingsufficientcash andtheavailabilityoffundingthroughanadequateamountofcommittedcreditfacilitiestomeetobligationswhendue.Duetothedynamicnature of the underlying businesses, Group's treasury maintains flexibility in funding by maintaining availability of required funds.

Management monitors rolling forecasts of the Group's liquidity position and cash and cash equivalents on the basis of expected cash flows.

(i) Financing arrangements The Group had access to the following undrawn borrowing facilities at the As at As at As at As at As at

end of the reporting period: September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 A. Expiring within one year 1,087.93 2,381.73 1 ,724.51 7 52.55 7 07.21 B. Expiring beyond one year (bank loans) - - 2 ,362.56 3 07.74 1,087.93 2,381.73 1 ,724.51 3 ,115.11 1 ,014.95

(ii) Maturities of financial liabilities The amounts disclosed in the table are the contractual undiscounted cash flows. Balances due within 12 months equal their carrying balances as the impact of discounting is not significant.

Contractual maturities of financial liabilities as at September 30, 2025 Less than 1 year 1 to 5 years More than 5 years Total Borrowings 3,261.19 2 ,073.92 - 5 ,335.11 Trade payables 2,931.51 - - 2 ,931.51 Lease liabilities 928.02 2 ,835.95 5 36.05 4 ,300.02 Other financial liabilities 541.89 3 5.37 2 5.71 6 02.97 7 ,662.61 4 ,945.24 5 61.76 1 3,169.61 Contractual maturities of financial liabilities as at September 30, 2024 Less than 1 year 1 to 5 years More than 5 years Total Borrowings 2,633.68 1 ,069.31 1 44.87 3 ,847.86 Trade payables 2,327.00 - - 2 ,327.00 Lease liabilities 919.08 3 ,356.21 9 69.96 5 ,245.25 Other financial liabilities 369.98 3 .65 1 .48 3 75.11 6 ,249.74 4 ,429.17 1 ,116.31 1 1,795.22 Contractual maturities of financial liabilities as at March 31, 2025 Less than 1 year 1 to 5 years More than 5 years Total Borrowings 2,904.96 1 ,424.39 - 4 ,329.35 Trade payables 2,308.87 - - 2 ,308.87 Lease liabilities 953.80 2 ,458.40 1 ,028.67 4 ,440.87 Other financial liabilities 400.25 4 1.77 2 2.98 4 65.00 6 ,567.88 3 ,924.56 1 ,051.65 1 1,544.09 Contractual maturities of financial liabilities as at March 31, 2024 Less than 1 year 1 to 5 years More than 5 years Total Borrowings 2,047.83 8 37.48 1 7.71 2 ,903.02 Trade payables 1,874.49 1 50.70 - 2 ,025.19 Lease liabilities 721.17 2 ,881.32 1 ,171.94 4 ,774.43 Other financial liabilities 496.00 6 .38 - 5 02.38 5 ,139.49 3 ,875.88 1 ,189.65 1 0,205.02 Contractual maturities of financial liabilities as at March 31, 2023 Less than 12 More than 12 Total months months Borrowings 2,208.22 1 ,253.17 3 ,461.39 Interest on borrowings (term loans) 108.81 8 6.81 1 95.62 Trade payables 2,257.62 - 2 ,257.62 Lease liabilities 7 67.15 4 ,454.09 5 ,221.24 Other financial liabilities 264.50 6 .57 2 71.07 5,606.30 5 ,800.64 1 1,406.94 Refer Note 35 where the amount of financial guarantee given to subsidiaries are disclosed.

(This space is intentionally left blank) 462Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 28 - Financial risk management (continued) C Market risk Market risk is a risk where the fair value or future cash flows of a financial instrument will fluctuate because of changes in market prices.

(i) Foreign currency risk TheGroupisexposedtoforeignexchangeriskarisingfromforeigncurrencytransactions.Foreignexchangeriskarisesfromfuturecommercialtransactionsandrecognisedassetsandliabilities denominated in a currency that is not the Group's functional currency (INR). The risk is measured through sensitivity analysis of probable movement in exchange rate as at the reporting period.

TheGroupprimarilyimportsmaterialswhicharedenominatedinforeigncurrencywhichexposesittoforeigncurrencyrisk.TheGrouphasanaturalhedgeintermsofitsreceivablesandpayables beinginUSD.TheGroupalsohasriskintermsoftranslationofitsforeignoperations.Further,anyadditionalexposureiscontinuouslymonitoredandhedgingoptionslikeforwardcontractsaretaken whenever they are expected to be cost effective.

(a) Foreign currency risk exposure The Group's exposure to foreign currency risk at the end of the reporting period expressed in INR as against respective foreign currency are as follows as at September 30, 2025:

CHF JPY GBP USD EUR HKD Financial asset Trade receivable - - - 2 ,028.32 1 2.85 - Cash and cash equivalents - - - 0 .45 - - Other current assets - - - - - - Other non current assets - - - - - - Net exposure to foreign currency risk (assets) - - - 2 ,028.77 1 2.85 - Financial liability Trade payables 1 7.33 1 .15 17.58 1 ,470.31 1 15.41 0 .81 Borrowings - - - 2 .31 - - Lease liabilities - - - - 6 92.34 - Other financial liabilities - - - - - - Net exposure to foreign currency risk (liabilities) 1 7.33 1 .15 1 7.58 1 ,472.62 8 07.75 0 .81 The Group's exposure to foreign currency risk at the end of the reporting period expressed in INR as against respective foreign currency are as follows as at September 30, 2024:

CHF JPY GBP USD EUR HKD Financial asset Trade receivable - - - 5 67.04 - - Cash and cash equivalents - - - 2 4.60 - - Other financial assets - - - 0 .18 - Net exposure to foreign currency risk (assets) 5 91.65 0 .18 - Financial liability Trade payables 7 .25 - 10.07 1 ,416.79 5 6.38 1 .62 Borrowings - - - 2 51.13 - - Lease liabilities - - - - 8 98.99 - Net exposure to foreign currency risk (liabilities) 7 .25 - 1 0.07 1 ,667.92 9 55.37 1 .62 The Group's exposure to foreign currency risk at the end of the reporting period expressed in INR as against respective foreign currency are as follows as at March 31, 2025:

CHF JPY GBP USD EUR HKD Financial asset Trade receivable - - - 1,706.74 2.03 - Cash and cash equivalents - - - 57.05 - - Other financial assets - - - - 0.18 - Net exposure to foreign currency risk (assets) - - - 1,763.79 2.21 - Financial liability Trade payables 7 .08 - 20.44 8 10.97 6 5.15 0 .07 Borrowings - - - 2 72.71 - - Lease liabilities - - - - 7 57.24 - Other financial liabilities 0 .26 74.39 - 3 4.17 1 .85 - Other current liabilities - - - - - - Contract Liabilities - - - - - - Net exposure to foreign currency risk (liabilities) 7 .34 7 4.39 20.44 1,117.85 824.24 0.07 463Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 28 - Financial risk management (continued) C Market risk (continued) The Group's exposure to foreign currency risk at the end of the reporting period expressed in INR as against respective foreign currency are as follows as at March 31, 2024:

CHF JPY GBP USD EUR HKD Financial asset Trade receivable - - - 1,760.15 2.36 - Other financial assets - - - 58.90 194.10 - Other current assets - - 5.30 20.58 8.95 - Other non current assets - - - 24.00 - - Net exposure to foreign currency risk (assets) - - 5.30 1,863.63 205.41 - Financial liability Trade payables - - 10.87 856.00 47.72 20.00 Borrowings - - - 1,322.52 - - Lease liabilities - - - - 923.33 - Other current liabilities - - - 176.53 - - Contract liabilities - - - 48.73 - - Net exposure to foreign currency risk (liabilities) - - 10.87 2,403.78 971.05 20.00 The Group's exposure to foreign currency risk at the end of the reporting period expressed in INR as against respective foreign currency are as follows as at March 31, 2023 CHF JPY GBP USD EUR HKD Financial asset Trade receivable - - 1.16 1,120.63 1.07 - Loans (unsecured) - - - 254.66 562.91 - Other financial assets - - - 0.01 253.32 - Other current assets - - 3.81 7.42 1.20 - Other non current assets - - - 0.37 - - Net exposure to foreign currency risk (assets) - - 4.97 1,383.09 818.50 - Financial liability Trade payables - - 1.62 359.59 7.58 19.70 Bank borrowings - - - 684.35 - - Other loans - - - 785.56 - - Lease liabilities - - - - 1,099.03 - Other current liabilities - - - 49.15 219.46 - Contract Liabilities - - - 47.00 - - Net exposure to foreign currency risk (liabilities) - - 1.62 1,925.65 1,326.07 19.70

(b) Sensitivity The sensitivity of profit or loss to changes in exchange rates arising from foreign currency denominated financial instruments is given below.

Impact on profit after tax and equity As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 USD Sensitivity INR/USD - Increase by 5% 20.07 (38.84) 23.31 (19.51) (19.58) INR/USD - decrease by 5% (20.07) 38.84 (23.31) 19.51 19.58 INR/GBP - Increase by 5% (0.63) (0.36) (0.74) (0.20) 0.12 INR/GBP - decrease by 5% 0.63 0.36 0.74 0.20 (0.12) INR/EUR - Increase by 5% (28.69) (34.47) (29.67) (27.64) (18.32) INR/EUR - decrease by 5% 28.69 34.47 29.67 27.64 18.32 INR/JPY - Increase by 5% (0.04) - (2.68) - - INR/JPY - decrease by 5% 0.04 - 2.68 - - INR/CHF - Increase by 5% (0.63) (0.26) (0.26) 0.02 - INR/CHF - decrease by 5% 0 .63 0 .26 0.26 (0.02) - INR/HKD - Increase by 5% (0.03) (0.06) (0.00) (0.72) (0.71) INR/HKD - decrease by 5% 0.03 0.06 0.00 0.72 0.71

(ii) Interest rate risk

(a) The exposure of Group's borrowings to interest rate changes at the end of the reporting period Variable rate borrowings 4,933.84 3,467.72 3,985.92 2,428.18 1,729.00 Fixed rate borrowings 3,754.64 4,344.23 3,864.55 4,334.58 5,630.00 Total borrowings 8,688.48 7,811.95 7,850.47 6,762.76 7,359.00

(b) Profit & loss and equity is sensitive to higher/lower interest expense from borrowings as a result of change in Interest rates - increase by 50 basis points (17.81) (12.52) (14.39) (8.76) (6.24) Interest rates - decrease by 50 basis points 17.81 12.52 14.39 8.76 6.24

(iii) Price risk Price risk is the risk of a decline in the value of a security or an investment portfolio. The Group has invested in debt mutual funds. The fair value for which is impacted by interest rate movements.

464Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 29 - Capital management For the purpose of Group's capital management, capital includes issued equity share capital, instruments entirely equity in nature and all other reserves attributable to the equity holders of the Group.

The Group's objectives when managing capital are to:

(i) Safeguard their ability to continue as a going concern, so that they can continue to provide returns for shareholders and benefits for other stakeholders, and

(ii) Maintain an optimal capital structure to reduce the cost of capital.

The Group monitors capital using gearing ratio and is measured by Net debt (total borrowings net of cash and cash equivalents) to equity.

(i) Net Debt to Equity Ratio As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Net debt (Refer note 36) 7,890.24 6,400.03 7,052.56 4,469.56 6,785.57 Total Equity 8,044.88 7,401.07 7,159.78 8,156.20 2,672.52 Net debt to equity ratio 0.98 0.86 0.99 0.55 2.54 Note 30 - Contingent liabilities As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Labour related matters (Refer note (i)) 73.10 64.37 68.33 60.00 52.00 Tax matters (Refer note (ii)) 861.22 861.22 861.22 844.31 844.31

(i)AfewcaseshavebeenfiledagainsttheCompanyinDistrictLabourcourt,Belagavi.IftheLabourCourtpassesanawardagainsttheCompany,theprobablecompensationwouldamountto₹

73.10(September30,2024:₹64.37March31,2025:₹68.33,March31,2024:₹60.00,March31,2023:₹52.00).TheCompanyishoweverconfidentofwinningthiscasebasedonthecounsel advice and hence the same is not provided in the standalone financial statements.

(ii)TheParentCompanyhasreceiveddemandorderu/s156oftheIncomeTaxAct,1961amountingtoINR25.23fortheFY2016-17(AY2017-18)andhasappealedthesaidorderbefore Commissioner Appeals and the Company believes it has strong merits in its case.

(iii)TheParentCompanyhasreceivedanorderduringtheyearendedMarch31,2022underSection143(3)oftheIncomeTaxAct,1961relatingtofinancialyear2017-18(assessmentyear2018-19) with a demand of INR 779.56. The Company has filed a writ petition with the Hon’ble High Court of Karnataka against the Order and the Company believes it has strong merits in its case.

(iv)IncometaxrefundclaimedbytheParentCompany(pertainingtoFY20,21&22amountingtoINR13)hasbeenadjustedbyTaxdepartmentagainsttheoutstandingdemand.Thesaidadjustment is not accepted by the Parent Company and can be treated as payments made under protest.

(v)InAerostructureManufacturingIndiaPrivateLimited,IncometaxmattersunderdisputeamountingtoINR39.00,mainlyincludedisputedclaimsarisingoutofvariousadjustmentscarriedout pursuanttoassessmentproceedingsandadditionsonaccountoftransferpricingadjustmentsmadebytheTaxAuthoritiesunderSection92CAoftheIncomeTaxAct,1961.TheCompanyisofthe view that it has a good defence in respect of the disallowances and adjustments made.

(vi)TheGrouphasevaluatedtheimpactoftheSupremeCourtJudgment in caseof"VivekanandaVidyamandirAndOthersVsTheRegionalProvidentFundCommissioner(II)WestBengal"andthe relatedcircular(CircularNo.C-I/1(33)2019/VivekanandaVidyaMandir/284)datedMarch20,2019issuedbytheEmployees’ProvidentFundOrganisationinrelationtonon-exclusionofcertain allowancesfromthedefinitionof"basicwages"oftherelevantemployeesforthepurposesofdeterminingcontributiontoprovidentfundundertheEmployees'ProvidentFunds&Miscellaneous Provisions Act, 1952. Inthe assessmentofthe managementwhichis supportedbylegaladvice, the Companyexpects that the aforesaid matter is notlikelytohave asignificantimpactand accordingly,noprovisionhasbeenmadeinthefinancialstatements.Further,theCompanyhascompliedwiththeabovejudgementandhasrevisedthewagesofitsemployeeswitheffectfromApril 01, 2019.

(vii) In Aerostructures Assemblies India Private Limited, Income tax matters under dispute amounting to INR 16.96, mainly include disputed claims arising out of adjustments against the benchmarkinganalysisofmanufacturingsegmentcarriedoutpursuanttoassessmentproceedingsandadditionsonaccountoftransferpricingadjustmentsmadebytheTaxAuthoritiesunderSection 143(3) of the Income Tax Act,1961. The Company is of the view that it has a good defence in respect of the disallowances and adjustments made.

(viii)DuringtheyearendedMarch31,2023,AequsConsumerProductsPrivateLimited(ACPPL)accruesaliabilitywhenalossduetopotentialclaimsandlegalactionsisconsideredprobableand theamountcanbereasonablyestimated.IntheopinionofManagement,theoutcomeofanypotentialclaimsandlegalproceedingsfromexistingcustomercontracts,ifdecidedadversely,isnot expected to have a material adverse effect on the business, financial condition and results of operation.

(ix) It is not practicable for the Company to estimate the timing of cash outflows, including interest and penalties, if any, in respect of the above matters pending resolution of the above matters.

(x) The Company does not expect any reimbursement in respect of the above contingent liabilities.

(xi) Refer note 35 for Corporate guarantees given to third parties by the Group for loans taken by related parties of the group.

Note 31 - Commitments Capital commitments Estimated amount of contracts remaining to be executed on capital account net of advances and not provided for.

Particulars As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(i) Property, plant and equipment 1,178.84 54.56 311.26 153.53 207.00 1 ,178.84 5 4.56 3 11.26 1 53.53 2 07.00 The Group has entered into various contracts for acquisition of property, plant and, equipment as part of its segment expansion plans.

465Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 32 - Earnings per share As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(a) Earnings per share (basic and diluted) - From continuing operations (0.29) (1.26) (1.80) (0.16) (2.42) - From discontinued operations (0.01) - 0.00 (0.04) (0.02) Total basic and diluted earnings per share attributable to the equity holders of the company (0.30) (1.26) (1.80) (0.20) (2.44)

(b) Profit / (loss) attributable to the equity share holders used in calculating basic and diluted earnings per share - From continuing operations (166.81) (716.12) (1,024.15) (88.46) (980.66) - From discontinued operations (2.96) (0.88) 0.69 (19.92) (7.60) Loss attributable to equity shareholders of the Company (169.77) (717.00) (1,023.46) (108.38) (988.26)

(c) Weighted Average number of Equity shares in calculating basic and diluted EPS 5 8,51,43,598 56,74,28,940 56,74,85,326 54,45,22,820 40,53,47,665 Diluted Earning per share ESOP's outstanding have an impact of reducing the loss per share on dilution and hence has an anti dilutive impact on the earnings per share.

(This space is intentionally left blank) 466Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 33 - Business combination and other acquisitions and disposals A. Transfer of business undertaking OnJuly11,2024,oneofthesubsidiarycompany-AequsConsumerProductsPrivateLimited(ACPPL)hasenteredintoaSlumpsaleagreementwithAequsCookwarePrivateLimited(ACPL)for transferofitsConsumerDurableGoods(CDG)BusinessUnit('BusinessUnit'),includingProperty,plantandequipment,Righttouseassetsandotherfinancialassets.ACPLisanewlyincorporated jointventurebetweentheParentCompanyandunrelatedventurepartner,bothholdinga50%share,andaccountedforusingtheequitymethod.TheBusinessUnittransferwaseffectivefromOctober 1, 2024. The business was transferred for a cash consideration of ₹ 300.53, equivalent to net assets acquired receivable after two years from the effective date of transfer.

The assets and liabilities have been transferred at the values as given in the below table:

As at September 30, 2024 Property, plant and equipment and capital work-in-progress 142.92 Capital work-in-progress 1.45 Intangible assets 0.48 Right-of-use assets 167.74 Inventory 69.68 Trade receivables 101.95 Financial assets 22.64 Cash and cash equivalents 21.93 Other bank balances 3.79 Other assets 86.88 Total assets 619.46 Financial liabilities 5.56 Trade payables 89.41 Employee benefit obligations 6.76 Other liabilities 2.28 Contract liabilities 31.68 Lease liabilities 183.24 Total liabilities 318.93 Net assets 300.53 Purchase consideration receivable 3 00.53 (This space is intentionally left blank) 467Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 34 - Segment information Description of segments and principal activities The Group's Chief Operating Decision Maker (CODM) is identified to be the Executive Chairman and Chief Executive Officer of the Parent Company, who plans the allocation of resources and assess the performance of the segments. During the year ended March 31, 2024, the Group has identified two reportable segments i.e., Aerospace and Consumer compared to single reportable in the preceding year. Hence, segment information for the corresponding previous financial period / years has been restated.

Particulars Six months ended September 30, 2025 Six months ended September 30, 2024 Aerospace Consumer Total Eliminations Total Aerospace Consumer Total Eliminations Total Segment Segment Revenue Gross revenue 5,152.89 7 06.25 5,859.14 - 5,859.14 4,316.65 661.03 4,977.68 - 4,977.68 Intra segment revenue ( 413.36) (74.19) (487.55) - (487.55) ( 369.42) (18.53) ( 387.95) - ( 387.95) Net external revenue 4,739.53 6 32.06 5,371.59 - 5,371.59 3,947.23 642.50 4,589.73 - 4,589.73 Result Segment results 1,169.61 (151.10) 1,018.51 ( 86.12) 932.39 872.48 (190.82) 681.66 (44.33) 637.33 Add / (Less) Finance costs ( 246.71) (172.40) (419.11) 61.60 (357.51) ( 170.05) (122.47) ( 292.52) 13.93 ( 278.59) Depreciation and amortisation expense ( 311.66) (259.89) (571.55) - (571.55) ( 301.26) (227.94) ( 529.20) - ( 529.20) Segment Result before exceptional items, Share of net profit/(loss) of associates and joint ventures 611.24 (583.39) 27.85 ( 24.52) 3.33 401.17 (541.23) ( 140.06) (30.40) ( 170.46) accounted for using the equity method net of tax, Unallocated corporate income net of unallocated expenses and Income taxes Exceptional items gain / (loss) - - - - - - (482.65) ( 482.65) - ( 482.65) Share of net profit/(loss) of associates and joint ventures accounted for using the equity method, net of tax 76.95 (43.12) 33.83 33.83 53.16 - 53.16 - 53.16 Unallocated corporate income net of unallocated expenses - - - - (91.33) - - - - ( 59.11) Profit / (Loss) before tax 688.19 (626.51) 61.68 ( 24.52) (54.17) 454.33 (1,023.88) ( 569.55) (30.40) ( 659.06) Income taxes - - - - (112.67) - - - - ( 57.05) Profit / (Loss) after tax 688.19 (626.51) 61.68 ( 24.52) (166.84) 454.33 (1,023.88) ( 569.55) (30.40) ( 716.11) Particulars Year ended March 31, 2025 Year ended March 31, 2024 Year ended March 31, 2023 Aerospace Consumer Total Eliminations Total Aerospace Consumer Total Eliminations Total Aerospace Consumer Total Eliminations Total Segment Segment Segment Revenue Gross revenue 9,092.54 1,075.08 10,167.62 - 10,167.62 8,315.75 2 ,185.96 10,501.71 - 10,501.71 6,259.59 2,540.31 8,799.90 - 8,799.90 Intra segment revenue (846.13) ( 75.43) (921.56) - (921.56) ( 745.97) (105.00) (850.97) - (850.97) ( 407.77) (270.81) ( 678.58) - ( 678.58) Net external revenue 8,246.41 999.65 9,246.06 - 9,246.06 7,569.78 2 ,080.96 9,650.74 - 9,650.74 5,851.82 2,269.50 8,121.32 - 8,121.32 Result Segment results 1,597.75 ( 286.71) 1,311.04 (101.59) 1,209.45 1,743.73 (155.68) 1,588.05 ( 132.95) 1,455.10 833.59 (155.50) 678.09 (47.53) 630.56 Add / (Less) Finance costs (387.75) ( 238.70) (626.45) 37.44 (589.01) ( 388.10) (357.86) (745.96) 107.90 (638.06) ( 483.43) (228.64) ( 712.07) 66.00 ( 646.07) Depreciation and amortisation expense (611.40) ( 422.66) (1,034.06) - (1,034.06) ( 615.54) (460.13) (1,075.67) ( 1.18) (1,076.85) ( 598.74) (349.56) ( 948.30) (46.86) ( 995.16) Segment Result before exceptional 598.60 ( 948.07) (349.47) (64.15) (413.62) 740.09 (973.67) (233.58) ( 26.23) (259.81) ( 248.58) (733.70) ( 982.28) (28.39) ( 1,010.67) items, Share of net profit/(loss) of associates and joint ventures accounted for using the equity method net of tax, Unallocated corporate income net of unallocated expenses and Income taxes Exceptional items gain / (loss) - ( 482.65) (482.65) - (482.65) 186.48 - 186.48 - 186.48 577.29 12.13 589.42 (596.78) ( 7.36) Share of net profit/(loss) of associates and 113.06 ( 27.82) 85.24 - 85.24 51.52 - 51.52 - 51.52 ( 8.74) - ( 8.74) - ( 8.74) joint ventures accounted for using the equity method, net of tax Unallocated corporate income net of - - - - (129.76) - - - - - - - - - - unallocated expenses Profit / (Loss) before tax 711.66 ( 1,458.54) (746.88) (64.15) (940.79) 978.09 (973.67) 4.42 ( 26.23) (21.81) 319.97 (721.57) ( 401.60) (625.17) ( 1,026.77) Income taxes - - - - (83.40) - - - - (99.66) - - - - ( 60.49) Profit / (Loss) after tax 711.66 ( 1,458.54) (746.88) (64.15) (1,024.19) 978.09 (973.67) 4.42 ( 26.23) (121.47) 319.97 (721.57) ( 401.60) (625.17) ( 1,087.26) 468Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Other information Particulars As at September 30, 2025 As at September 30, 2024 Aerospace Consumer Total Eliminations Total Aerospace Consumer Total Eliminations Total Segment Segment Segment assets 11,530.35 10,644.54 22,174.89 (1,169.12) 21,005.77 10,521.30 7 ,932.29 18,453.59 ( 164.30) 18,289.29 Unallocated corporate assets Deferred tax assets - - - - 331.07 - - - - 313.69 Current tax assets - - - - 6.67 - - - - 32.02 Total assets 11,530.35 10,644.54 22,174.89 (1,169.12) 21,343.51 10,521.30 7 ,932.29 18,453.59 ( 164.30) 18,635.00 Segment liabilities 7,454.73 6,941.38 14,396.12 (1,169.12) 13,227.00 6,671.07 4 ,709.97 11,381.04 ( 164.30) 11,216.74 Unallocated corporate liabilities - - - - 71.63 - - - 17.19 Total liabilities 7,454.73 6,941.38 14,396.12 (1,169.12) 13,298.63 6,671.07 4,709.97 11,381.04 ( 164.30) 11,233.93 Particulars As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 Aerospace Consumer Total Eliminations Total Aerospace Consumer Total Eliminations Total Aerospace Consumer Total Eliminations Total Segment Segment Segment Segment assets 10,148.71 8,701.64 18,850.35 (602.69) 18,247.66 10,631.34 7,343.20 17,974.54 ( 83.44) 17,891.10 13,239.74 4,849.06 18,088.81 (5,207.21) 12,881.59 Unallocated corporate assets Deferred tax assets 331.70 - 331.70 331.70 - - - - 324.47 - - - - 309.00 Current tax assets 19.04 - 19.04 19.04 - - - - 14.26 - - - - 27.33 Total assets 10,499.45 8,701.64 19,201.09 (602.69) 18,598.40 10,631.34 7 ,343.20 17,974.54 ( 83.44) 18,229.83 13,239.74 4,849.06 18,088.81 (5,207.21) 13,217.92 Segment liabilities 6,893.90 5,147.00 12,040.90 (602.28) 11,438.62 6,633.44 4 ,019.58 10,653.02 ( 579.39) 10,073.63 7,653.39 3,110.22 10,763.62 (218.28) 10,545.34 Unallocated corporate liabilities - - - - - - - - - - - - - - - Total liabilities 6,893.90 5,147.00 12,040.90 (602.28) 11,438.62 6,633.44 4,019.58 10,653.02 ( 579.39) 10,073.63 7,653.39 3,110.22 10,763.62 (218.28) 10,545.34 (This space is intentionally left blank) 469Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Geographical information Revenue Six months period ended Six months period ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Geography Amount % Amount % Amount % Amount % Amount % India 614.85 11.44% 577.01 12.57% 985.96 10.74% 1 ,223.10 12.67% 947.63 11.67% United States of America 1,312.85 24.45% 1119.05 24.38% 2,130.92 23.02% 1 ,862.50 19.30% 1,644.47 20.25% France 1,312.54 24.44% 891.12 19.42% 2,044.82 22.11% 1 ,709.75 17.72% 1,517.34 18.68% Hong Kong 499.69 9.30% 410.39 8.94% 622.14 6.72% 1 ,606.45 16.65% 977.88 12.04% Sweden 282.23 5.26% 451.96 9.85% 904.57 9.77% 1 ,044.50 10.82% 648.76 7.99% United Kingdom 744.60 13.87% 504.29 10.99% 817.64 8.83% 679.44 7.04% 812.52 10.00% Germany 317.29 5.91% 381.14 8.30% 1,135.12 12.28% 993.99 10.30% 797.82 9.82% Others 287.54 5.34% 254.77 5.55% 604.89 6.53% 531.01 5.50% 774.90 9.55% Total 5,371.59 100.00% 4,589.73 100.00% 9,246.05 100.00% 9 ,650.74 100.00% 8,121.32 100.00% Non-current assets Geography As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 India 1 1,234.22 8 ,912.96 9,551.55 8,598.56 6,976.31 USA 5 11.96 2 01.81 194.62 786.27 720.21 France 1 91.57 3 99.03 380.13 486.22 141.37 Netherlands - - - - 347.60 Total 1 1,937.75 9,513.80 1 0,126.30 9,871.05 8,185.49 Information about major customers Particulars Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Segment Revenue % of total Segment Revenue % of total Segment Revenue % of total Segment Revenue % of total Segment Revenue % of total revenue revenue revenue revenue revenue Customer 1 Aerospace 1,280.61 23.85% Aerospace 968.84 21.11%Aerospace 2,198.00 23.74%Aerospace 1,812.25 18.78%Consumer 1,440.47 17.74% Customer 2 Aerospace 1,022.07 19.03% Aerospace 959.55 20.91%Aerospace 1,834.99 19.82%Aerospace 1,652.57 17.12%Aerospace 1,414.66 17.42% Customer 3 Aerospace 565.06 10.52% Aerospace 451.96 9.85%Aerospace 904.57 9.77%Consumer 1,166.60 12.09%Aerospace 1,310.97 16.14% Customer 4 Aerospace 414.81 7.72% Aerospace 415.41 9.05%Aerospace 883.09 9.54% Aerospace 1,044.57 10.82%Aerospace 719.99 10.00% (This space is intentionally left blank) 470Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related Party Transactions Names of related parties and related party relationship Relationship Name of the related party Related parties where control exists Ultimate holding company Aequs Inc, Cayman Islands (100% beneficially owned and controlled by the Melligiri Foundation) Holding company Aequs Manufacturing Investments Private Limited, Mauritius ('AMIPL') Related parties with whom transactions have taken place during the period / year Associates Aequs Foundation, India (ceased to be associate w.e.f February 25, 2024).

Joint ventures Aerospace Processing India Private Limited ('API') SQuAD Forging India Private Limited ('SQuAD') Aequs Cookware Private Limited ('ACPL') w.e.f. September 30, 2024 Aequs Rajas Extrusion Private Limited ('AREPL') (ceased to be joint ventures w.e.f. June 19, 2023) Subsidiaries AeroStructures Manufacturing India Private Limited ('ASMIPL') Aequs Stock Option Plan Trust ('ESOP Trust') Aequs Aerospace BV ('AABV') Aerospace Manufacturing Holdings Private Limited ('AMHPL') Aequs Oil and Gas LLC ('AOGLLC') Aequs Engineered Plastics Private Limited ('AEPPL') Aequs Force Consumer Products Private Limited ('AFCPPL') Aequs Consumer Products Private Limited ('ACPPL') Aequs Toys Private Limited ('ATPL') Aerostructures Assemblies India Private Limited ('AAI') w.e.f. June 30, 2022 Aequs Cookware Private Limited ('ACPL') till September 29, 2024 Aequs Material Management Private Limited ('AMMPL') (Struck off w.e.f. June 29, 2024) Subsidiary of ASMIPL Aequs Aerospace LLC ('AALLC') Subsidiary of AALLC Aequs Aero Machine Inc ('AAM') Subsidiary of AABV SCI Du Champ De pivoines ('SCI Du') (Merged w.ef April 01, 2023) Aequs Holdings France SAS ('AHF') Subsidiary of AHF Aequs Aerospace France SAS ('AAF Corp') Subsidiaries of AAF Corp Bernar SAS ('Bernar') (Merged w.ef April 01, 2023) Subsidiaries of AEPPL Aequs Toys Hong kong Private Limited, Hong Kong ('ATHPL') Subsidiaries of AFCPPL Aequs Force Technology Company Limited ('AFTCL'), deregistered w.e.f. December 27, 2024 Subsidiaries of ACPPL Aequs Home Appliances Private Limited ('AHAPL'), struck off w.e.f. June 27, 2025 Subsidiaries of ATPL Koppal Toys Molding COE private Limited ('KTMCPL') Koppal Toys Tooling COE Private Limited ('KTTCPL'), struck off w.e.f. November 30, 2024 Aequs Rajas Extrusion Private Limited ('AREPL') w.e.f. June 19, 2023 Key management personnel Mr. Aravind Melligeri, Executive Chairman and Chief Executive Officer Mr. Rajeev Kaul, Managing Director Dr. Ajay Prabhu, Director Dr. Eberhard Klaus Richter, Director Dr. Shubhada Rao, Director (w.e.f. September 30, 2023 and ceased to be director w.e.f. December 31, 2024) Mr. Mahesh Parasuraman, Director (w.e.f. March 24, 2021 and ceased to be director w.e.f. September 11, 2023) Mrs. Vidhya Sarathy, Director (Appointed as an additional director w.e.f January 31, 2025 and Independent director w.e.f April 25, 2025) Mr. Dinesh Iyer, Chief Financial Officer Dr. Anup Wadhawan, Independent Director (w.e.f. April 25, 2025) Mr. Ravi Mallikarjun Hugar, Company Secretary and Compliance officer 471Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related Party Transactions Names of related parties and related party relationship Aequs SEZ Private Limited ('ASEZ') Aequs Foundation, India Automotive End Solution Private Limited('AESPL') Melligeri Investments LLC ('MILLC') Industrial Knowledge Centre Private Limited ('IKC') Enterprises in which individuals owning interest in the Group, or their MFRE Texas Holding LLC, USA relatives have control, joint control or significant influence MFRE Taris, LLC MFRE Private Trust MFRE Estate Private Limited ('MFREEPL') Altum Trust ('Altum') QuEST Global Engineering Services Private Limited ('QGESPL') Aequs Limited, Malta ('ALM') (renamed as MFO IP holdings Private Limited w.e.f. March, 17, 2025) Hubballi Durable Goods Cluster Private Limited ('HDGCPL') (This space is intentionally left blank) 472Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party disclosures - Transactions Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Ultimate Holding Company - Aequs, Inc.

Expenses incurred on behalf of related entity - - - - - Expenses incurred by related party - - - - 0 .00 Interest expenses on loan taken - - - - 2 1.27 Repayment of loan - - - - - Holding Company - AMIPL Unsecured loan taken during the period / year - - - 248.14 - Issue of shares - for cash - - - - - Issue of shares - for consideration other than cash - - - - 839.20 Expenses incurred on behalf of related entity - - - - 0.03 Interest expense - others 16.87 15.80 32.77 - - Equity shares transferred to AL - - - - - Associates Aequs Foundation Expenses incurred on behalf of related entity - - - 0.12 0 .08 Sale of PPE - - - 0.01 0 .01 Joint Ventures - Transactions SQuAD Employee stock option expense cross charge - - 0.16 0.49 0 .61 Expenses incurred on behalf of related entity - 0.27 0.28 8.93 8 .44 Fair value of financial guarantee issued during the period / year - - 0.90 0.90 8 .91 Financial guarantee income 1.20 1.20 2.40 5.21 8 .48 Investments in equity shares - - - 154.88 7 1.78 Sale of goods 0.09 1.64 55.61 42.67 2 2.63 Sale of PPE - - 0.01 - - Services provided 35.67 24.63 10.80 2.28 1 0.59 Purchase of goods and consumables 34.68 29.16 42.53 35.38 1 .52 Services received 78.86 0.51 0.39 0.37 - Impairment of investments - - - - 1 9.37 Expenses incurred by related party - - 0.05 - - API Employee stock option expense cross charge - - - 0.09 - Expenses incurred by related entity - 0.29 0.01 - - Sale of goods - - 0.07 - - Expenses incurred on behalf of related entity - - 0.03 14.34 1 3.31 Services received 195.30 151.84 323.55 267.45 2 10.62 Services provided 10.56 9.60 19.20 5.25 5 .33 Financial guarantee income 0.45 0.45 0.90 0 .85 0 .18 Fair value of financial guarantee issued - - - 6.32 - Purchase of goods and consumables 0.44 - 0.13 - - Aequs Rajas Unsecured loan given during the period / year - - - - 1 .00 Interest income on unsecured loan given - - - - 0 .61 Expenses incurred on behalf of related entity - - - - 0 .62 ACPL Expenses incurred on behalf of related entity 0.03 - 0.43 - - Service rendered - - - - - Expenses incurred by related party 1.80 - 2.27 - - Financial guarantee Income 3.22 - 3.20 - - Fair value of financial guarantee issued during the period / year - - 64.29 - - Deferred business consideration - - 300.53 - - Interest on deferred business consideration 18.03 - 18.03 - - Employee stock option expense - - 0.16 - - Investments in equity shares - 41.50 41.50 - - 473Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party disclosures - Transactions (continued) Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Enterprises in which individuals owning interest in the Group, or their relatives have control, joint control or significant influence - Transactions IKC Expenses incurred on behalf of related entity - - 0.37 0.78 2 .61 Expenses incurred by related party - - - - - Services received - 1.46 1.48 61.14 7 8.60 ASEZ Deposit given - - 14.43 5.22 0 .11 Expenses incurred on behalf of related entity 0.13 0.32 8.72 19.65 3 1.19 Expenses incurred by related party - 0.12 1.23 0.75 - Financial guarantee expense 5.48 10.64 10.21 43.70 1 7.07 Interest income on unsecured loan - - - - 4 .10 Interest expense on lease liability 109.91 126.13 246.38 219.81 1 92.06 Repayment of lease liability 146.38 125.08 256.99 - 1 88.81 Surrender of Lease liability - - 63.05 - - Services received 174.47 196.26 444.89 702.26 3 86.35 Sale of services - - - 4.70 3 .81 Repayment of loan by ASEZ - - - - 6 0.00 Interest expense on unsecured loan taken - - - - 1 7.30 Repayment of unsecured loan taken - - - - 2 85.40 Sale of PPE - - - - 1 .64 Sale of scrap - - - - 0 .33 Fair value of financial guarantee received during the period / year 7.87 5.22 8.22 73.46 1 1.48 Unsecured loan given - - - - - Unsecured loan taken - - - - - Aequs Foundation Expenses incurred on behalf of related entity - - 0.32 - - Sale of PPE - - - - - (This space is intentionally left blank) 474Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party disclosures - Transactions (continued) Six months ended Six months ended Year ended Year ended Year ended September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 MILLC Expenses incurred by related party - - - - 0.03 Interest on loan taken 1.08 1.00 2.10 2.02 1 .99 QGESPL Services received 13.29 2.10 10.03 2.55 2 .64 MFRE Private Trust Expenses incurred on behalf of related entity - - - 0.50 0 .00 Fair value of financial guarantee received during the period / year - - - 1.02 - Financial guarantee expense 0.07 3.38 - 1.65 - MFREEPL Expenses incurred on behalf of related entity - - - - 0 .00 Financial guarantee expense - - - 0.76 0 .15 AESPL Expenses incurred on behalf of related entity 0.86 0.00 - - 0 .02 ALM Royalty expenses - - - - 7 0.24 Branding expenses 5.00 5.00 10.00 5.90 - HDGCPL Deposit given - - - 44.90 5 4.43 Services received 97.78 69.49 239.81 231.49 8 .93 Repayment of lease liability 8.69 10.72 18.82 - 0 .98 Interest expenses on lease liability 21.27 31.32 53.04 12.60 9 .15 Expenses incurred by related party - - 0.03 - - Expenses incurred on behalf of related entity - - - 0.60 0 .15 Transfer due to slump sale - - 183.24 - - Recognition of new lease - 0.98 - - - MFRE Taris, LLC Repayment of lease liability - - - 13.27 9 .54 Interest expenses on lease liability - - - 0.46 1 .08 Key managerial personnel and their relatives Managerial remuneration Mr. Aravind Melligeri 90.36 21.69 43.89 40.84 4 4.32 Mr. Rajeev Kaul 9.45 10.33 18.36 15.10 1 2.29 Mr. Ravi Mallikarjun Hugar 4.01 4.41 7.23 5.35 5 .18 Mr. Dinesh Iyer 10.53 9.93 17.02 14.07 1 1.81 Mr. Ajay Aravind Prabhu - 0.38 1.45 - - Ms. Shubhada Rao - 0.67 - 1.41 1 .20 Mrs. Vidhya Sarathy 1.25 - 0.42 - - Dr. Anup Wadhawan 2.25 - - - - Dr. Eberhard Klaus Richter 2.49 - - - - Short-term employee benefits 117.82 44.57 83.90 72.18 7 4.09 Post employee benefits 0.39 0.37 0.75 0.76 0 .71 Share-based payment 2.13 2.47 3.71 3.83 -

Note: All transactions were made on commercial terms and conditions.

475Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party disclosures - Balances as at year-end As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Ultimate Holding Company - Aequs, Inc.

Unsecured Borrowings - - - - 1 71.74 Dues from related parties - - - 0 .07 0 .32 Holding Company - AMIPL Loans from related parties (unsecured) 2 66.16 2 51.13 2 56.37 248.14 - Interest accrued but not due on borrowings 3 7.44 4 .83 1 9.36 - - Associates AF Dues from related parties - - - 0 .04 0 .12 Trade receivables - - - - - Investment in share capital - - - - 0 .01 Joint Ventures - Balances SQuAD Investment in share capital 7 46.23 7 46.23 7 46.23 7 46.23 7 73.11 Impairment of Investments 2 34.39 2 34.39 234.39 2 34.39 - Fair value of financial guarantee issued 4 0.33 3 9.43 4 0.33 3 9.43 5 6.65 Fair value of ESOP cost 1 .32 1 .16 1 .32 1 .16 0 .66 Trade receivables 1 3.22 1 1.05 7 .61 2 .85 4 0.07 Dues from related parties - 0 .00 0 .06 0 .72 8 .31 Trade Payables 9 .58 1 7.21 1 .06 1 1.10 1 .57 Dues to related parties - - - - 0 .09 API Investment in share capital 8 9.52 8 9.52 89.52 8 9.52 8 9.52 Fair value of financial guarantee issued 6 .32 6 .32 6.32 - - Fair value of ESOP cost 0 .00 0 .00 0.00 - 0 .45 Trade receivables 5 .20 9 .60 0.07 0 .40 0 .25 Dues from related parties - - 0.01 1 .07 2 .66 Trade Payables 1 33.65 8 2.74 108.52 7 0.76 5 4.18 Dues to related parties - - (0.01) - 0 .15 Aequs Rajas Unsecured loan given - - - - 6 .12 Interest receivable on unsecured loan given - - - - - Dues from related parties - - - - 0 .75 Impairment of loan and interest thereon - - - - 6 .12 ACPL Investment in Equity shares 41.50 41.50 4 1.50 - - Fair value of financial guarantee issued 64.29 - 6 4.29 - - Fair value of ESOP cost 0.16 - 0 .16 - - Business purchase receivable - - 3 18.56 - - Dues to related parties 336.59 - 0 .02 - - (This space is intentionally left blank) 476Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party disclosures - Balances as at year-end (continued) As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Enterprises in which individuals owning interest in the Group, or their relatives have control - Balances IKC Dues from related parties - 0.26 0 .03 0 .26 2 .46 Trade Payables - 0.10 0 .11 1 .71 0 .55 MILLC Dues from related parties - - - 0 .34 0 .43 Unsecured Borrowings 16.96 16.00 1 6.33 1 5.93 1 5.70 Interest Payable 8.14 7.66 8 .92 6 .58 4 .48 ASEZ Fair value of financial guarantee received 27.08 23.56 2 2.31 1 30.99 3 9.03 Unamortized fair value of the guarantee 41.56 50.79 4 6.19 - - Interest accrued and due on above loan - - - - 0 .20 Security deposit (Undiscounted) 438.07 451.96 3 97.01 3 16.02 4 42.71 Dues from related parties 0.37 - 3 .46 0 .93 7 .38 Dues to related parties - - 0 .02 0 .77 0 .26 Trade Payables 34.89 28.86 3 3.44 3 5.21 1 77.31 Advance to suppliers - - - - 0 .11 Trade receivables - 0.01 - 4 .01 0 .80 AF Dues from related parties 0 .01 - - - - Trade receivables - 0 .01 - - - Investment in share capital - - - - - AESPL Trade Payables 0.16 0.15 0 .15 0 .15 0 .13 Dues to related parties 1.19 0.33 0 .33 0 .33 0 .33 Dues from related parties 17.25 17.25 1 7.25 2 6.34 2 6.34 Impairment on dues from related parties 17.24 17.24 - 2 5.74 2 5.74 QGESPL Trade Payables 9.40 0.79 3 .45 0 .45 - Altum Dues from related parties 0.00 0.00 0 .00 0 .00 - MFREEPL Dues from related parties 0.01 0.01 0 .01 0 .01 0 .01 Fair value of financial guarantee received 0.04 - - 0 .26 1 8.61 MFRE Private Trust Dues from related parties 1.97 1.97 - 1 .97 1 .97 Trade Payables - 0.18 - - - Fair value of financial guarantee received - 0.19 - 3 .30 - ALM Trade Payables 61.19 66.77 6 6.19 5 .98 6 7.38 HDGCPL Dues from related parties 0.01 0.64 0 .01 0 .64 0 .08 Dues to related parties - - - - 0 .02 Security deposit 64.59 99.33 64.59 9 9.32 5 4.43 Trade Payables 23.62 25.89 5 .89 3 0.53 1 0.38 Key managerial personnel and their relatives Short-term employee benefits 74.88 4.03 9 .92 6 .75 4 .92 Post employee benefits 0.39 0.37 0 .75 0 .76 0 .71 Share-based payment - 477Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party disclosures - Balances as at year-end (continued) Disclosure as required under Section 186(4) of Companies Act, 2013

(i) Loans outstanding Aequs Rajas Extrusion Private Limited - - - - 6 .12

(ii) Investments in associates and joint ventures (Refer Note 7) 813.07 716.66 7 68.31 6 21.61 5 74.90

(iii) Guarantees utilised (for term loan and working capital) Aerospace Processing India Private Limited ('API') 50.00 50.00 50.00 5 0.00 20.19 SQuAD Forging India Private Limited ('SQuAD') 240.00 240.00 240.00 2 90.00 310.39 The terms are in compliance with Section 186(7) of the Companies Act, 2013.

(This space is intentionally left blank) 478Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(a) In the books of Aequs Aerospace France SAS ('AAF Corp') AL Services provided 14.60 10.32 2 8.94 5.84 - ASMIPL Salaries, wages and bonus - - - 48.44 - Services provided 63.82 28.91 7 5.55 - 45.12 AABV Interest income - - - - 0 .49 Unsecured loan given - - - - 7 7.39 Repayment of loan given - - - - 5 3.06 AAM Interest income - - 0 .43 - - Interest expense 1.88 - - - -

(b) In the books of Aequs Aerospace BV (AABV) AL Interest expense 37.65 37.60 7 4.56 7 6.19 3 5.19 Issue of shares of the Company - - - - - Unsecured loan taken - - - - 120.57 Employee stock option expense 1.36 0.95 - - - AALLC Interest expense 9.89 9.22 1 9.55 3 3.12 2 9.81 Interest income - - - - - Unsecured loan taken - - - - 20.74 Repayment of interest on loan taken - - - - 15.37 AHF Interest income - 30.32 54.73 6 3.65 5 1.76 AAM Interest expense 0.46 0.43 0 .91 0 .87 0 .86 AAF Corp Interest expense - - - - 0 .49 Unsecured loan taken - - - - 8 1.57 Repayment of loan taken - - - - 5 3.06 ASMIPL Financial guarantee expense - - - 1 4.29 6 .42

(c) In the books of Aerostructures Assemblies India Private Limited (AAI) ASMIPL Cost of raw materials consumed 4.50 5.93 12.95 6.77 2 .58 Services received 0.00 - - - - Services provided 4.47 2.99 5.83 5 .98 - Sale of goods - 1.36 3.77 - 0.64 Expenses incurred on behalf of the related party - - 0.04 - - Expenses incurred on behalf of the Company - 0.03 0.10 0.64 0 .72 AAM Sale of goods 9.92 7.87 1 4.86 1 5.17 3 .22 Cost of raw materials consumed 0.44 0.08 1 .82 0 .18 - AL Services received - - - 3 .08 3 .42 Services provided 1.18 - 2 .07 - - Sale of goods - 0.04 0 .04 - - Management fees - - - 4 .07 4 .78 Employee stock option expense 0.35 0.35 0 .58 - - Fair value of financial guarantee received - - 2 .70 3 .10 1 .00 Fair value of financial guarantee expenses 1.35 1.58 3 .00 - - Expenses incurred on behalf of the related party - - 0 .33 - - Expenses incurred on behalf of the Company - 0.00 0 .00 7 .81 1 7.52 479Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(c) In the books of Aerostructures Assemblies India Private Limited (AAI) (continued) AFCPPL Expenses incurred on behalf of the Company - - - - 0 .52 ACPPL Expenses incurred on behalf of the Company - - 0 .15 - 0 .78 AEPPL Expenses incurred on behalf of the Company - - 0 .03 - - ATPL Expenses incurred on behalf of the Company - - 0 .02 - -

(d) In the books of Aequs Aerospace LLC ('AALLC') ASMIPL Interest expense 11.54 6.10 2 4.60 2 6.27 2 1.38 AABV Interest income 9.91 9.22 1 9.34 3 3.12 2 9.75

(e) In the books of Aequs Aero Machine Inc. ('AAM') ASMIPL Cost of raw materials consumed 274.89 301.11 5 93.85 5 92.24 2 75.24 Sale of goods 81.15 38.06 1 64.09 6 5.56 3 3.86 Management fees 46.12 20.56 4 3.89 - - AAI Cost of raw materials consumed 9.92 7.87 1 3.03 1 5.17 3 .28 Sale of goods 0.44 0.08 1 .81 0 .18 - AAF Corp Interest Income 1.89 - 0 .43 - - AABV Interest income 0.46 0.43 0 .91 0 .87 0 .86 AL Management fees - - - 4 0.73 8 4.71 Sale of goods 0.05 0.66 0 .71 - - ACPPL Services received - - 3 .22 - -

(f) In the books of Aequs Consumer Products Private Limited (ACPPL) ASMIPL Cost of raw materials consumed 0.00 - - 0 .62 - Expenses incurred on behalf of the Company 6.62 0.09 0.09 1.46 2.79 Expenses incurred on behalf of the related party - - 0.04 - 0.96 Purchase of asset - - 2.74 - - Interest expense 0.28 - - - - Unsecured loan taken 100.00 - - - - AL Interest expense 24.40 - 0 .47 0 .15 2 .57 Services received - - - 4 .90 2 2.35 Equity shares issued 615.00 1,150.01 285.20 - 243.98 Unsecured loan taken 330.00 - 180.00 15.00 24.00 Repayment of unsecured loan - - - 20.00 39.00 Expenses incurred on behalf of the Company - 0.24 0.40 28.21 46.79 Expenses incurred on behalf of the related party - - 1.62 0.37 0.12 Financial guarantee Received - 4.49 - 460.67 27.67 Financial guarantee expense 28.46 31.34 59.65 57.33 1.96 Financial guarantee terminated - - 45.85 - - Purchase of asset 6.91 - 0.85 - - Employee stock option expense 0.87 0.87 2.44 1.75 2.12 480Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(f) In the books of Aequs Consumer Products Private Limited (ACPPL) (continued) ATPL Cost of raw materials consumed 0.11 0.13 0 .13 0 .03 - Purchase of asset - - - 0.09 - AHAPL Interest expense - - - - - Investment in equity share capital - - - - 40.00 Acquisition of business of AHAPL - - - - 36.24 Expenses incurred on behalf of the related party - - - - 0.11 Interest expense on deferred business consideration - - - 3.74 - Impairment in investment in equity share capital - 41.20 42.98 1.78 - AFCPPL Expenses incurred on behalf of the Company - - 0.08 0.04 - AAM Services received - - 3 .78 - - KTTCPL Expenses incurred on behalf of the Company - - - - 0.05 AAI Expenses incurred on behalf of the Company - - 0.15 - 0.78

(g) In the books of Aequs Engineered Plastics Private Limited ('AEPPL') AL Services provided - - - 2.83 - Services received 0.30 - 0 .01 7 .17 1 8.94 Interest expense 10.08 0.93 6 .18 - 1 1.15 Miscellaneous income - - - - 3 .01 Salaries, wages and bonus - - - - - Cost of raw materials consumed 0.00 - 0.00 - - Reimbursements received - - 0.58 - 0.00 Reimbursement of expenses paid - 0.13 0.13 15.83 30.65 Borrowings availed 70.00 50.00 152.50 - 65.00 Repayment of borrowings availed - 15.00 22.50 - 102.00 Proceeds from issue of shares 100.00 - - 100.00 510.00 Sale of assets - - 0.01 - - AFCPPL Sale of goods - 6.43 6 .43 1 0.14 2 3.96 Services provided - 0.34 0 .34 1 .67 - Cost of raw materials consumed 1 3.65 0.91 3 9.10 3 8.63 1 22.13 Services received - 3.33 3 .29 2 0.56 2 9.24 Rent - - - - 6 .88 Reimbursements received - 0.01 1.69 32.94 19.65 Reimbursement of expenses paid 0 .06 - - 0.58 1.70 Purchase of property, plant and equipment - - 13.87 - 1.79 ATPL Sale of goods 0.38 0.03 3.99 0 .76 0 .86 Cost of raw materials consumed 15.19 0.00 4.38 0 .78 0 .01 Reimbursement of expenses paid - - 0.49 - 0.04 Reimbursements received - - - 10.47 22.00 Sale of Property, plant and equipments - 0.14 0.14 0.15 0.10 ATHPL Services received 3.08 - - 1 0.67 3 5.44 Reimbursement of expenses paid - - - 2.08 - Impairment of investments - - - 0.07 - 481Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(g) In the books of Aequs Engineered Plastics Private Limited ('AEPPL') (continued) ASMIPL Interest expense - - - - 6 .08 Reimbursements received - - - - - Reimbursement of expenses paid 0 .02 0 .07 0 .48 0 .34 0 .78 Unsecured loan taken - - - - 5 .00 Repayment of unsecured loan - - - - 5 5.00 Sale of Property, plant and equipments 0.10 0.02 0 .08 - - Purchase of Property, plant and equipments 0.10 - - - - KTMCPL Sale of goods 7.01 0.01 0 .01 - 0 .10 Cost of raw materials consumed 30.23 - - - - Reimbursements received - - - 2.82 3.25 Reimbursement of expenses paid - - - - 0.04 Sale of Property, plant and equipments - 0.26 0.26 - 4.66

(g) In the bookd of Aequs Engineered Plastics Private Limited ('AEPPL')

(continued) KTTCPL Reimbursements received - - - - 0.70 Expenses incurred by the related party - - - - 0.34 AAI Expenses incurred by the related party - - 0.03 - -

(h) In the books of Aequs Force Consumer Products Private Limited (AFCPPL) AL Interest expense 4.18 0.02 2.97 1 .87 2 0.31 Services received - - - 4 .86 5 .96 Reimbursement of expenses paid - 0.13 0.15 14.80 17.05 Borrowings availed 10.00 25.00 70.00 95.00 125.00 Repayment of loan taken - - - 95.00 195.00 Fair value of financial guarantee received - - 1.26 2.73 4.18 Financial guarantee expense - 1.37 2.75 2.75 2.66 Equity shares issued - 50.00 50.00 628.37 447.85 Reimbursements received - - 0.17 - - Sale of assets - - 0.01 - - AEPPL Cost of raw materials consumed - 6.49 6 .43 1 0.14 2 3.81 Services received - 0.27 0 .34 1 .67 - Sale of goods 13.66 0.90 3 9.09 3 8.39 1 22.37 Services provided - 3.28 3 .30 2 0.80 2 9.54 Other income - - - - 6 .88 Sale of assets - - 13.88 - 1.79 Reimbursement of expenses paid - 0.01 1.69 32.95 19.64 Reimbursements received 0.06 - - 0.59 1.70 ATPL Sale of goods - 0.69 2 .16 7 .51 4 .03 Cost of raw materials consumed - - - 4 .80 - Services received - - - 2 .20 - Sale of assets - 0.70 0.70 1.08 0.60 Expenses incurred on behalf of the related party - - - 0.06 - Purchase of asset - - - 0.06 - Expenses incurred by the related party - - - 0.01 - KTMCPL Sale of goods 0.01 2.15 3 .36 0 .64 - Cost of raw materials consumed - - - 0 .04 - Services received - 0.31 0 .31 1 1.91 - Interest income - 0.21 0 .24 - - Sale of assets 1.60 0.29 0.29 - 4.87 Transfer of loan from KTT - - - 4.00 - Repayment of loan given - - 4.00 - - 482Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(h) In the books of Aequs Force Consumer Products Private Limited (AFCPPL) (continued) AFTCL Services received - - - - 2 0.59 Impairment of investments - - - 0.09 - Sale of Investments - 1.60 1.60 - - Gain on Derecognition of Investment - 1.51 1.51 - - ATHPL Services received - - - 5 .24 1 5.83 KTTCPL Expenses incurred by the related party - - - - 0.13 Expenses incurred on behalf of the related party - - - - 0.11 Reimbursements received - - - - - Acquisition of assets & Liabilities in slump sale - - - 34.89 - ASMIPL Reimbursement of expenses paid - 0.04 0.10 0.39 0.33 Sale of assets 0.08 0.00 0.01 - - ACPPL Expenses incurred by the related party - - 0.08 0.04 -

(i) In the books of Aequs Home Appliances Private Limited (AHAPL) ACPPL Interest income - 3 .74 - Expenses incurred by ACPPL on behalf of the Company - - - - 1.64 Transfer of Business to ACPPL - - - - 36.24 ASMIPL Expenses incurred by ASMIPL on behalf of the Company - - - - 0.00

(j) In the books of Aequs Holdings France SAS ('AHF') AABV Interest expense - 30.32 5 4.73 6 3.65 5 1.76

(k) In the books of Aerospace Manufacturing Holdings Private Limited (AMHPL) AL Interest expense - - - 6 .36 8 .34 Payments made on behalf of the company - - - 3.42 0.95 Unsecured loan taken - - - 83.85 0.40 Distribution of assets - - - - - Sale of Investment - - - 90.88 - Expenses incurred by the related party - 0.00 0 .00 - - ATPL Services provided - - - 0 .33 - ASMIPL Payments made on behalf of the company - - - - 0.05 Expenses incurred by the related party - 0.00 0.00 - -

(l) In the books of Aequs Limited (formerly known as Aequs Private Limited) (AL) AABV Interest income 37.52 37.60 7 4.56 7 6.19 3 5.19 Investments in equity shares - - - - - Employee stock option expense cross charges - - 2.74 1.90 2.91 Unsecured loan given - - - 219.78 120.57 Impairment of investments - - - - - Impairment of loan and interest thereon 173.01 75.71 103.99 215.72 198.61 Employee stock option expense 1.36 0.95 - - - 483Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(l) In the books of Aequs Limited (formerly known as Aequs Private Limited) (AL) (continued) AAF Corp Services received 14.12 10.32 2 8.91 5 .84 - Expenses incurred on behalf of the related party - - - 0.09 0.08 Expenses incurred by the related party - - 0.65 - - AAI Cost of raw materials consumed - 0.04 0.04 - - Services received 1.18 - 2.07 - - Services provided - - - 3 .08 3 .15 Management fees - - - 4 .07 4 .78 Expenses incurred on behalf of the related party - 0.00 0.00 17.40 17.52 Investments in equity shares - - - - - Fair value of financial guarantee issued - - 2.70 3.15 1.00 Employee stock option expense cross charges 0.35 0.35 0.57 0.05 0.68 Financial guarantee income 1.35 1.58 3.00 1.81 0.78 Impairment of investments- Reversal - - - 16.29 - Expenses incurred by the related party - - 0.33 - - AAM Management fees - - - 4 0.73 8 4.71 Cost of raw materials consumed 0.05 0.66 0 .71 - - Expenses incurred on behalf of the related party - - - 2.31 3.19 Expenses incurred by the related party - - - - 1.57 ACPPL Interest income 24.40 - 0 .44 0 .15 2 .57 Services provided - - - 4 .90 0 .72 Management fees - - - - 2 1.71 Expenses incurred on behalf of the related party - 0.24 0.40 28.21 46.79 Expenses incurred by the related party - - 1.62 0.37 0.12 Investments in equity shares 615.00 1,150.01 1,270.01 1,355.00 243.98 Fair value of financial guarantee issued - 4.49 41.63 456.45 27.74 Employee stock option expense cross charges 0.87 0 2.44 1.75 2.12 Financial guarantee income 28.45 31.34 59.65 29.70 1.96 Unsecured loan given 330.00 - 180.00 15.00 24.00 Repayment of loan given - - - 20.01 39.00 Sale of assets 6.91 - 0.85 - - AEPPL Purchase of goods and consumables - - 0 .00 2 .83 - Services provided 0.30 - 0 .01 7 .17 6 .78 Interest income 10.08 0.84 5 .56 - 1 1.15 Management fees - - - - 1 2.16 Services received - - - - 3 .01 Sale of goods 0.00 - 0 .00 - - Investments in equity shares 100.00 - - 100.00 510.00 Employee stock option expense cross charges - - 1.00 2.88 3.97 Impairment of investments - - - 74.44 76.61 Impairment/(reversal) of loan given and interest thereon - - - - (37.00) Expenses incurred by the related party - - 0.58 - - Expenses incurred on behalf of the related party - 0.13 0.13 15.83 30.65 Unsecured loan given 70.00 50.00 152.50 - 65.00 Repayment of loan given - 15.00 22.50 - 102.00 Purchase of asset - - 0.00 - - 484Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(l) In the books of Aequs Limited (formerly known as Aequs Private Limited) (AL) (continued) AFCPPL Interest income 4.18 0.02 2 .81 1 .87 2 0.31 Services provided - - - 4 .86 5 .67 Expenses incurred on behalf of the related party - 0.13 0.15 14.80 17.05 Expenses incurred by the related party - - 0.17 - - Investments in equity shares - 50.00 50.00 410.74 448.00 Fair value of financial guarantee issued - - 1.26 2.73 4.07 Financial guarantee income - 1.37 2.75 2.75 2.56 Repayment of loan given - - - 95.00 195.00 Unsecured loan given 10.00 25.00 70.00 95.00 125.00 Cost of raw materials consumed - - - - - Impairment of investments - - - 185.29 - Impairment of investments-CCD - - - 207.32 - Purchase of asset - - 0.01 - - AMHPL Interest income - - - 6 .36 8 .34 Expenses incurred on behalf of the related party - 0.00 0.00 0.77 0.95 Income from distribution of subsidiary's assets - - - - - Unsecured loan given - - - - 0.40 Impairment of investments - - - 113.12 9.41 Impairment of loan and interest thereon - - - - 7.88 Repayment of loan given - - - 82.96 - ASMIPL Sale of goods 0.31 0.02 0 .02 0 .13 7 .74 Services provided 6.16 0.70 4 .20 3 1.39 2 0.99 Cost of raw materials consumed 0.20 0.25 0 .97 0 .31 0 .15 Services received - 0.07 0 .07 0 .08 - Interest expense - - - 1 0.19 2 0.58 Management fees - - - 3 2.58 3 8.21 Expenses incurred on behalf of the related party 0.04 0.13 0.13 109.08 99.91 Expenses incurred by the related party 1.67 0.68 8.75 7.24 7.01 Employee stock option expense cross charges 0.70 0.70 0.28 1.31 2.89 Fair value of financial guarantee issued 34.13 20.48 20.48 28.65 29.91 Unsecured loan received - - - - 395.00 Repayment of loan taken - - - 218.88 238.00 Financial guarantee income 16.88 15.62 29.36 29.44 25.55 Unsecured loan taken - - - 60.00 - AREPL Interest income 0.41 0.40 0.83 0 .76 - Impairment of loan and interest thereon 0.41 0.40 - - - Expenses incurred on behalf of the related party - - 0 .00 - - ATPL Interest income 5.54 0.04 3 .34 0 .98 - Management fees - - - - 5 .21 Services provided - - - 1 .36 0 .81 Sale of assets - - - - 0.06 Investments in equity shares 50.00 100.00 100.00 533.00 430.00 Fair value of financial guarantee issued - - 29.38 59.95 12.89 Financial guarantee income 4.81 3.13 10.05 6.25 0.96 Employee stock option expense cross charges 0.50 0.50 0.51 0.60 0.43 Expenses incurred on behalf of the related party - 0.01 0.01 8.23 16.03 Expenses incurred by the related party - - 0.82 - - Unsecured loan given 15.00 15.00 100.00 83.00 - Repayment of loan given - - - 83.00 - Impairment of investments - - - 707.37 - ESOP Trust Issue of shares to Aequs Stock Option Plan Trust 447.84 - - - - Exercise of share options 40.97 - 2 3.10 - - 485Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(l) In the books of Aequs Limited (formerly known as Aequs Private Limited) (AL) (continued) KTMCPL Interest income 2.16 - 0 .97 - - Expenses incurred by the related party - - - 102.41 0.85 Expenses incurred on behalf of the related party - 0.00 0.00 0.20 4.16 Financial guarantee income 5.35 5.35 10.68 14.80 - Unsecured loan given - - 39.00 - - KTTCPL Expenses incurred on behalf of the related party - - - - 1.21 ALM Services received - - 1 0.00 - -

(m) In the books of Aequs Rajas Extrusion Private Limited (AREPL) AL Interest expense 0.41 0.40 0 .83 0 .76 -

(n) In the books of AeroStructures Manufacturing India Private Limited (ASMIPL) AAF Corp Services received 32.88 25.53 5 1.00 4 8.44 4 3.88 Management fees 30.70 3.37 3 2.83 - - AAI Sale of goods 4.48 5.93 1 2.94 6 .77 3 .40 Services received 4.40 3.05 5 .72 5 .93 0.65 Services provided 0.00 - - - - Cost of raw materials consumed - 1.36 3 .85 0 .05 0 .01 Expenses incurred on behalf of the related party - 0.03 0 .11 0.64 0.80 Expenses incurred by the related party - - 0.04 - - Sale of assets - - - - 0.03 AALLC Interest income 11.54 12.25 2 4.88 2 6.27 2 1.57 AAM Sale of goods 274.89 301.11 6 05.99 5 92.24 2 75.24 Cost of raw materials consumed 81.15 38.06 1 63.41 6 5.56 3 7.10 Management fees 46.12 20.56 4 3.89 - - Expenses incurred by the related party - - - - 0.62 ACPPL Sale of scrap - - - 0 .35 - Sale of goods - - - 0 .27 - Expenses incurred on behalf of related party 6.73 0.09 0 .09 1.46 1.98 Expenses incurred by the related party - - 0.04 - - Sale of assets - - 2.74 - - Interest Income 0.28 - - - - Unsecured loan given 100.00 - - - - 486Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(n) In the books of AeroStructures Manufacturing India Private Limited (ASMIPL) (continued) AL Cost of raw materials consumed 0.31 0.02 - 0 .16 0 .61 Services received 6.05 0.70 4 .20 3 1.36 2 9.38 Sale of goods 0.21 0.25 0 .97 0 .31 0 .15 Services provided - 0.07 0 .07 0 .08 - Interest income - - - 1 0.19 2 0.58 Management fees - - - 3 2.58 3 8.21 Salaries, wages and bonus - - - - - Expenses incurred by the related party - 0.13 0.13 109.21 95.00 Employee stock option expense 0.70 0.70 2.60 0.81 1.60 Fair value of financial guarantee received 34.13 20.48 20.48 28.71 28.98 Financial guarantee expense 16.59 15.62 28.75 29.02 25.60 Unsecured loan given - - - 60.00 394.72 Advance given to related party - - - - - Loan repaid by related party - - - 238.76 244.71 Expenses incurred on behalf of the related party 1.67 0.68 8.75 - - AEPPL Interest income - - - - 6 .08 Expenses incurred on behalf of the related party 0.02 0.07 0.49 0.30 0.86 Unsecured loan given - - - - 5.00 Loan repaid by related party - - - - 55.00 Purchase of asset 0.10 0.02 0.08 - - AABV Financial guarantee income - - - 1 4.29 6 .42 Expenses incurred on behalf of the related party - - - - 20.29 Impairment of Investments - - - - 37.00 Impairment of recoverables from related entity - - - - 118.00 AMHPL Expenses incurred on behalf of the related party - 0.00 0.00 0.01 0.00 Expenses incurred by the related party - - - - 0.05 ATPL Expenses incurred on behalf of the related party - 0.05 0.05 1.20 0.53 Financial gurantee given - - - 0.12 12.74 Financial guarantee income - - - 12.05 0.85 KTTCPL Expenses incurred on behalf of the related party - - - 0.01 0.00 KTMCPL Expenses incurred on behalf of the related party - 0.00 0.00 0.02 0.25 AFTPL Expenses incurred on behalf of the related party - - - - 0.01 AHAPL Expenses incurred on behalf of the related party - - - - 0.01 AFCPPL Expenses incurred on behalf of the related party - 0.04 0.10 0.09 0.31 Purchase of asset 0.08 0.00 0 .01 - - AREPL Expenses incurred on behalf of the related party - - - 0.00 - 487Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(o) In the books of Aequs Toys Hong kong Private Limited ('ATHPL') AEPPL Services provided 3.08 - - 2 0.00 3 5.44 AFCPPL Services provided - - - 0 .28 1 5.83 ATPL Services provided - - - - 1 5.66

(p) In the books of Aequs Toys Private Limited (ATPL) ACPPL Sale of goods 0.11 0.13 0 .13 0 .03 - AEPPL Cost of raw materials consumed 0 .38 0.03 3 .99 0 .76 0 .76 Sale of goods 15.20 0.00 4 .38 0 .78 0 .01 Expenses incurred by the related party - - - 10.47 22.00 Expenses incurred on behalf of the related party - - 0.49 - 0.04 Purchase of asset - 0.14 0.14 0.15 0.10 AFCPPL Cost of raw materials consumed - 0.70 2 .27 7 .51 3 .72 Sale of goods - - - 4 .80 - Services received - - - 2 .20 - Purchase of asset - 0.70 0.44 0.70 0.60 Sale of assets - - - 0.06 - Expenses incurred on behalf of the related party - - - 0.01 - Expenses incurred by the related party - - - 0.06 - AMHPL Services received - - - 0 .33 - Expenses incurred by the related party - - - 0.33 0.14 AL Interest expense 5.54 0.05 3 .62 0 .98 - Services received - - - 1 .36 0 .81 Management fees - - - - 5 .21 Expenses incurred on behalf of the Company - 0.01 0.01 8.23 10.81 Expenses incurred on behalf of the related party - - 0.82 - - Purchase of asset - - - - 0.06 Financial guarantee received - - 29.38 59.97 12.74 Equity shares issued 50.00 100.00 100.00 527.57 421.93 Unsecured loan taken 15.00 15.00 100.00 83.00 - Loan Converted to Equity - - - 83.00 - Financial guarantee expense 4.82 3.13 1 0.05 - - Employee stock option expense 0.50 0.50 0.51 0.60 0.43 ASMIPL Expenses incurred by the related party - 0.05 0.05 1.20 0.53 Financial guarantee received - - - 0.12 12.74 ATHPL Services received - - - 2 .29 1 5.66 KTMCPL Services received 2.60 2.40 4 .03 5 .17 1 .79 Cost of raw materials consumed 0.98 0.49 1 .14 0 .15 0 .90 Sale of goods 3.85 1.51 3 .13 0 .51 - Expenses incurred by the related party - - - 0.12 0.01 Expenses incurred on behalf of the related party - 0.30 0.34 9.04 11.88 Investment in Equity Instruments - 50.00 50.00 160.00 194.90 KTTCPL Expenses incurred on behalf of the related party - - - - 0.07 Investment in Equity Instruments - - 4 0.10 - - AREPL Investment in Equity Instruments - - - 0.00 - 488Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(q) In the books of Koppal Toys Molding COE Private Limited (KTMCPL) AFCPPL Cost of raw materials consumed 0 .01 2 .15 - 0 .64 - Services provided - 0.31 0 .31 1 1.91 - Sale of goods - - - 0 .04 - Interest expense - 0.23 0 .27 - - Purchase of asset 1.60 0.29 0.29 - 4.87 Unsecured loan taken - - - 4.00 - Repayment of unsecured loan - - 4.04 - - ATPL Services provided 2.65 2.40 4 .03 5 .17 - Sale of goods 0.98 0.49 1 .14 0 .15 2 .72 Cost of raw materials consumed 3.85 1.51 3 .13 0 .51 - Expenses incurred by the related party - 0.30 0.34 9.04 11.88 Expenses incurred on behalf of the related party - - - 0.12 0.01 Issue of equity - 50.00 50.00 160.00 194.90 KTTCPL Interest expense - - - 0 .21 1 .73 Repayment of loan taken - - - - 21.00 Unsecured loan taken - - - - 21.00 AEPPL Sale of goods 30.23 - - - - Cost of raw materials consumed 7.01 0.01 - - 0 .10 Expenses incurred by the related party - - - 2.82 3.26 Expenses incurred on behalf of the related party - - - - 0.04 Purchase of asset - 0.26 0.26 - 4.66 AL Interest expense 2.16 - 1 .08 - - Expenses incurred by the related party - 0.00 0.00 0.20 4.16 Expenses incurred on behalf of the related party - - - - 0.85 Unsecured loan taken - - 39.00 - - Financial guarantee expense 5.35 5.35 10.67 - - ASMIPL Expenses incurred by the related party - 0.00 0.00 0.02 0.25

(r) In the books of Koppal Toys Tooling COE Private Limited (KTTCPL) KTMCPL Interest income - - - 0 .21 1 .73 Unsecured loan given - - - - 21.00 Repayment of loan given - - - - 21.00 AL Expenses incurred on behalf of the related party - - - - - Expenses incurred by the related party - - - - 1.21 ACPPL Expenses incurred by the related party - - - - 0.05 AEPPL Expenses incurred by the related party - - - - 0.69 Expenses incurred on behalf of the related party - - - - 0.34 AFCPPL Expenses incurred by the related party - - - - 0.11 Expenses incurred on behalf of the related party - - - - 0.13 ASMIPL Expenses incurred by the related party - - - - 0.00 ATPL Expenses incurred by the related party - - - - 0.07 489Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the transactions eliminated during the six months ended September 30, 2025 and September 30, 2024, years ended March 31, 2025, March 31, 2024 and March 31, 2023:

Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(s) In the books of Aequs Force Technology Company Limited (AFTCL) AFCPPL Services provided - - - - 2 0.59 Buy back of equity - 1.60 1.60 - -

(t) In the books of Aequs Oil and Gas LLC (AOGLLC) AAM Interest expense - - - - -

(u) In the books of Bernar SAS ('Bernar') AAF Corp Legal and professional fees - - - - - (This space is intentionally left blank) 490Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the balance outstanding eliminated as at September 30, 2025, September 30, 2024, March 31, 2025, March 31, 2024 and March 31, 2023:

As at As at As at As at As at Particulars 30 September 2025 30 September 2024 March 31, 2025 March 31, 2024 March 31, 2023

(a) In the books of Aequs Aerospace BV (AABV) AL Loans from related parties (unsecured) 910.18 817.69 8 10.34 7 87.95 5 62.91 Interest accrued but not due on borrowings 348.69 239.90 2 75.52 1 93.92 1 16.52 Impairment of loan and interest - - 1 ,086.04 - - ASMIPL Dues to related parties 117.96 1 17.96 1 17.96 1 17.96 1 17.96 AAF Corp Trade receivables - - - 2 40.98 - Dues from related parties 278.36 250.07 2 47.82 - 0 .45 Dues to related parties 158.11 142.04 1 40.77 1 36.88 - Interest accrued but not due on borrowings - - - - 0 .08 Loans from related parties (unsecured) - - - - 4 3.38 AALLC Loans from related parties (unsecured) 253.64 239.31 2 44.31 2 38.35 2 34.85 Interest accrued but not due on borrowings 249.29 215.70 2 30.33 2 05.64 1 69.65 Dues to related parties 109.60 103.41 1 05.57 1 02.99 1 01.48 AAM Loans from related parties (unsecured) 23.74 22.40 2 2.87 2 2.31 2 1.99 Interest accrued but not due on borrowings 9.26 7.82 8 .46 7 .36 6 .37 AHF Loan given - 848.58 8 40.96 8 17.72 8 11.35 Interest accrued on loan given - 336.56 3 58.49 2 94.28 2 28.59 Dues from related parties - 239.03 2 36.89 2 30.34 2 28.54

(b) In the books of Aequs Aerospace France SAS ('AAF Corp') AABV Dues to related parties 278.36 250.07 247.82 2 40.98 0 .45 Dues from related parties 158.11 142.04 140.77 1 36.88 - Interest accrued on loan given - - - - 0 .08 Loan given - - - - 4 3.38 Loans from related parties (unsecured) - - - - - AALLC Trade receivables 9.10 8.18 8.10 7 .88 7 .82 AAM Dues from related parties 1.45 1.30 1.29 1 .26 1 .23 Trade payable 159.15 142.98 141.69 1 37.78 1 36.71 Loans from related parties 49.10 - 43.71 - - Interest accrued but not due on borrowings 2.46 - 0.44 - - AHF Loan given 16.02 11.59 14.11 1 1.17 1 0.08 Trade receivables 0.12 0.11 0.11 0 .11 0 .11 Dues to related parties - - - - 1 7.87 Interest accrued but not due on borrowings - - - - 9 .79 AOGLLC Trade payable 6.94 6.24 6.18 6 .01 5 .96 AL Trade receivables 5.43 5.26 4.49 5 .86 - Trade payable 0.21 - 0.18 - - ASMIPL Trade receivables 0.59 4.05 0.25 8 .27 7 .35 491Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the balance outstanding eliminated as at September 30, 2025, September 30, 2024, March 31, 2025, March 31, 2024 and March 31, 2023:

As at As at As at As at As at Particulars 30 September 2025 30 September 2024 March 31, 2025 March 31, 2024 March 31, 2023

(b) In the books of Aequs Aerospace France SAS ('AAF Corp') (continued) Bernar Interest accrued on loan given - - - - 1 .07 Unsecured loan given - - - - 3 50.57 Trade receivables - - - - 7 .98 Dues from related parties - - - - 7 1.48 SCI Du Dues to related parties - - - - 2 2.39 Trade receivables - - - - 0 .11

(c) In the books of Aerostructures Assemblies India Private Limited (AAI) AAM Trade receivables 15.41 5.69 3.32 5 .15 0 .49 Trade payable 0.54 0.08 0.96 - - AL Dues to related parties - - - 0 .80 7 .03 Trade payable - - - 0 .16 0 .62 Dues from related parties 0.04 - 0.04 - - Trade receivables 1.55 0.04 0.35 - - Financial guarantee asset 0.47 5.44 9.50 - - ASMIPL Trade payable 1.07 1.99 1.38 0 .94 0 .34 Trade receivables 2.31 2.42 3.42 1 .46 0 .82 Dues to related parties - - 0.07 - 0 .01 ACPPL Dues to related parties - - - - 0 .78 AFCPPL Dues to related parties - - - - 0 .52 AEPPL Dues from related parties 0.03 - 0 .03 - - ATPL Dues from related parties 0.02 - 0 .02 - -

(d) In the books of Aequs Aerospace LLC ('AALLC') AABV Interest accrued on loan given 249.29 215.70 230.33 2 05.64 1 69.65 Loan given 253.64 239.31 244.31 2 38.35 2 34.85 Dues from related parties 109.60 103.41 105.57 1 02.99 1 01.48 AAF Corp Dues to related parties 9.10 8.18 8.07 7 .88 7 .82 AAM Dues from related parties 27.38 64.03 31.73 6 3.78 6 2.84 AHF Dues from related parties 125.42 112.67 111.67 1 08.58 1 07.73 AOGLLC Loan given 70.24 66.27 67.66 6 6.00 6 5.03 Dues from related parties 57.67 54.41 55.55 5 4.20 5 3.40 ASMIPL Interest accrued but not due on borrowings 100.67 103.33 85.55 9 0.60 6 3.19 Loans from related parties (unsecured) 275.03 259.50 264.93 2 58.46 2 54.67 492Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the balance outstanding eliminated as at September 30, 2025, September 30, 2024, March 31, 2025, March 31, 2024 and March 31, 2023:

As at As at As at As at As at Particulars 30 September 2025 30 September 2024 March 31, 2025 March 31, 2024 March 31, 2023

(e) In the books of Aequs Aero Machine Inc. ('AAM') AABV Interest accrued on loan given 9.26 7.82 8.46 7 .34 6 .37 Loan given 23.74 22.40 22.87 2 2.33 2 1.99 AAF Corp Dues from related parties 157.70 141.68 140.41 1 36.52 1 36.71 Loan given 51.56 - 44.15 - - Dues to related parties - - - - 1 .23 AAI Trade payable 15.41 5.69 3.32 5 .15 0 .49 Trade receivable 0.54 0.08 0.96 - - AALLC Dues to related parties 27.38 64.03 31.73 63.78 6 2.84 AL Dues from related parties 1.74 1.64 - 1.63 1 .61 Dues to related parties - - 1.67 2.33 - Trade receivables 0.10 0.66 0 .04 - 1 26.18 ASMIPL Trade payable 346.05 313.77 276.89 2 66.95 1 92.11 Trade receivables 128.10 36.76 86.13 4 3.80 9 .84 Dues from related parties - - - - 2 .83 ACPPL Trade receivables 3.37 - 3.25 - -

(f) In the books of Aequs Consumer Products Private Limited (ACPPL) AHAPL Deferred business consideration payable - - - 4 0.25 3 7.45 KTTCPL Dues from related parties - - - - 0 .05 AL Dues to related parties 22.95 25.82 22.95 3 4.46 4 0.69 Trade payable 1.31 1.43 - 4 .48 0 .75 Unsecured borrowings 510.00 - 180.00 - 5 .00 Dues from related parties - - - - 0 .12 Interest accrued but not due on borrowings 22.64 - 0.44 - 0 .00 Financial guarantee asset 297.01 399.62 325.47 - - ASMIPL Dues to related parties 7.72 4.35 2.86 4 .25 2 .79 Dues from related parties - - 0.02 - 0 .96 Trade payable 3.01 0.62 3.01 0 .62 - Interest accrued but not due on borrowings 0.28 - - - - AAI Dues from related parties - - - - 0 .78 AEPPL Dues to related parties - - - - 0 .00 Dues from related parties - - - - 0 .76 Trade payable - - - - 0 .81 AFCPPL Dues to related parties - - - - 0.39 Trade payable - - - - 0 .53 AAM Trade payable 3.37 - 3.25 - - 493Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the balance outstanding eliminated as at September 30, 2025, September 30, 2024, March 31, 2025, March 31, 2024 and March 31, 2023:

As at As at As at As at As at Particulars 30 September 2025 30 September 2024 March 31, 2025 March 31, 2024 March 31, 2023

(f) In the books of Aequs Consumer Products Private Limited (ACPPL) (continued) ATPL Trade payable 0.11 - - - -

(g) In the books of Aequs Engineered Plastics Private Limited ('AEPPL') AFCPPL Trade payable 11.99 3.46 30.48 0 .59 5 5.02 Trade receivables 0.37 0.62 0.00 0 .02 0 .73 Dues to related parties 0.01 - - - 1 .39 Dues from related parties - - 1.68 1 .93 6 .28 AL Dues to related parties 5.29 10.50 5.29 1 0.37 1 4.86 Trade payable 1.85 6.56 1.56 6 .56 0 .33 Interest accrued but not due on borrowings 1.94 0.38 1.38 - - Loans from related parties (unsecured) 200.00 35.00 130.00 - - Dues from related parties - - 0.19 - - Trade receivables - - 0.01 - - ASMIPL Dues to related parties - - - 0 .01 0 .28 ATPL Trade receivables 0.13 0.14 3.29 2 .78 0 .86 Dues to related parties - - 0.15 - 0 .04 Due from related parties - - - 0 .21 5 .49 Trade payable 14.79 0.00 4.24 - - KTMCPL Trade payable 30.04 - - - - Trade receivables 7.01 - 0.01 - 4 .75 Dues to related parties - - - - 0 .04 Dues from related parties - - - 2 .36 0 .74 ACPPL Trade receivables - - - - 0 .81 Dues to related parties - - - - 0 .76 Dues from related parties - - - - 0 .00 AAI Dues to related parties 0.03 - 0.03 - - ATHPL Trade payable - - - - 0 .51 KTTCPL Dues to related parties - - - - 0 .34 Dues from related parties - - - - 0 .38

(h) In the books of Aequs Force Consumer Products Private Limited (AFCPPL) AEPPL - - Dues to related parties - - 1.68 1 .93 6 .23 Trade payable 0.37 0.62 - 0 .02 0 .63 Trade receivables 11.99 3.46 30.49 0 .59 5 4.71 Dues from related parties 0.01 - - - 2 .15 AL Dues to related parties 17.26 17.24 17.26 1 7.11 4 .62 Trade payable 6.38 6.38 6.38 6 .38 1 .99 Interest accrued but not due on borrowings 0.78 0.02 0.78 - - Loans from related parties (unsecured) 80.00 25.00 70.00 - - Dues from related parties - - 0.05 - - AREPL Dues from related parties 0.02 - 0.02 - - 494Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the balance outstanding eliminated as at September 30, 2025, September 30, 2024, March 31, 2025, March 31, 2024 and March 31, 2023:

As at As at As at As at As at Particulars 30 September 2025 30 September 2024 March 31, 2025 March 31, 2024 March 31, 2023

(h) In the books of Aequs Force Consumer Products Private Limited (AFCPPL) (continued) ASMIPL Dues to related parties 0.00 0.00 0.00 0 .00 0 .06 Trade receivables - 0.00 - - - ATPL Dues from related parties 0.06 0.06 0.06 0.06 - Trade payable - - - 0.38 - Trade receivables 9.84 7.76 10.07 7 .60 3.72 KTMCPL Trade payable - 0.06 - 0.09 - Dues from related parties - 0.03 0.03 - 4.87 Trade receivables 4.82 1.87 3.21 - - KTTCPL Deferred Business Consideration Payable - 34.89 - 34.89 - Dues to related parties - - - - 0.13 Dues from related parties - - 0.05 - 0.11 AAI - - Dues from related parties - - - - 0 .52 ACPPL Dues from related parties - - - - 0 .92 AFTCL Trade payable - - - - 3 9.78

(i) In the books of Aequs Home Appliances Private Limited (AHAPL) ACPPL Deferred Business Consideration receivable - - - 4 0.25 3 7.45

(j) In the books of Aequs Holdings France SAS ('AHF ') AABV Dues to related parties - 239.03 236.89 2 30.34 2 28.54 Interest accrued but not due on borrowings - 336.56 358.49 2 94.28 2 28.59 Loans from related parties (unsecured) - 848.58 840.96 8 17.72 8 11.35 AAF Corp Dues to related parties 16.02 11.59 14.11 1 1.17 1 0.08 Trade payable 0.12 0.11 0.11 0 .11 0 .11 Loan given - - - - 1 7.87 Dues from related parties - - - - 9 .79 Interest accrued - - - - - AALLC Dues to related parties 125.42 112.67 111.66 1 08.58 1 07.73

(k) In the books of Aerospace Manufacturing Holdings Private Limited (AMHPL) AL Dues to related parties 0.55 0.55 0.55 0 .55 3 .96 Unsecured borrowings - - - - 7 7.23 ASMIPL Dues to related parties - - 0.00 - 2 .06 ATPL Dues from related parties - - - - 0 .01

(l) In the books of Aequs Oil and Gas LLC (AOGLLC) AAF Corp Dues from related parties 6.94 6.24 6.18 6 .01 5 .96 495Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the balance outstanding eliminated as at September 30, 2025, September 30, 2024, March 31, 2025, March 31, 2024 and March 31, 2023:

As at As at As at As at As at Particulars 30 September 2025 30 September 2024 March 31, 2025 March 31, 2024 March 31, 2023

(l) In the books of Aequs Oil and Gas LLC (AOGLLC) (continued) AALLC Dues to related parties 57.67 54.41 55.55 5 4.20 5 3.40 Loans from related parties (unsecured) 70.24 66.27 67.66 6 6.00 6 5.03

(m) In the books of Aequs Limited (formerly known as Aequs Private Limited) (AL) AABV Interest accrued on loan given 348.69 239.90 275.52 1 93.92 0 .00 Loan given 910.18 817.69 810.34 7 87.95 6 79.43 Impairment of loan and interest 1,258.86 - 1,085.86 - - AAF Corp Trade payable 5.43 5.26 4.45 5 .86 - Dues from related parties 0.21 - 0.18 - - Advance paid to Vendor 3.60 - - - - AAI Dues to related parties 0.04 - 0.04 - - Trade receivables - - - 0 .16 0 .67 Dues from related parties - - - 0 .80 7 .03 Trade payable 1.54 0.04 0.35 - - Financial guarantee liability 9.05 6.35 12.05 - - AAM Dues to related parties 0.60 0.57 0.58 0 .57 0 .56 Dues from related parties - - - 2 .33 - Trade payable 1.23 1.73 1.13 1 .07 1 27.23 ACPPL Trade receivables 1.31 1.43 - 4 .48 0.75 Dues to related parties - - - - 0 .12 Interest accrued on loan given 22.64 - 0.44 - 0 .00 Loan given 510.00 - 180.00 - 5.00 Dues from related parties 22.95 25.82 22.95 3 4.46 40.69 Financial guarantee liability 471.01 488.69 502.21 - - AREPL Interest accrued on loan given 2.13 1.28 1.72 0 .88 - Loan given 7.40 7.40 7.40 7 .40 - Dues from related parties 0.00 - 0 .00 - - AFCPPL Trade receivables 6.38 6.38 6.39 6 .38 2 .27 Interest accrued on loan given 0.78 0.02 0.78 - - Loan given 80.00 25.00 70.00 - - Dues to related parties - - 0.05 - - Dues from related parties 17.26 17.24 17.26 1 7.11 4 .62 Trade payable - - - - - Financial guarantee liability - - 10.81 - - AMHPL Dues from related parties 0.55 0.55 0.55 0 .55 3 .96 Loan given - - - - 7 7.23 Interest accrued on loan given - - - - - AEPPL Trade receivables 1.85 6.56 1.56 6 .56 0 .33 Loan given 200.00 35.00 130.00 - - Interest accrued on loan given 1.94 0.38 1.38 - - Dues to related parties - - 0.19 - - Dues from related parties 5.29 10.50 5.29 1 0.37 1 4.86 Trade payable - - 0.01 - - Impairment of investments 969.52 - 969.52 - - ASMIPL Dues to related parties - - 0.26 0 .31 - Trade payable 0.22 0.31 0.23 0 .00 0 .32 Trade receivables 1.19 0.61 1.46 1 .84 6 .82 Advance from related parties - - - - 1 69.55 Dues from related parties - - - 3 .91 - Financial guarantee liability 241.17 190.16 219.51 - - 496Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the balance outstanding eliminated as at September 30, 2025, September 30, 2024, March 31, 2025, March 31, 2024 and March 31, 2023:

As at As at As at As at As at Particulars 30 September 2025 30 September 2024 March 31, 2025 March 31, 2024 March 31, 2023

(m) In the books of Aequs Limited (formerly known as Aequs Private Limited) (AL) (continued) ATPL Trade receivables 1.22 1.22 1.22 1 .22 0 .81 Interest accrued on loan given 4.65 0.04 1.02 - - Loan given 115.00 15.00 100.00 - - Dues from related parties 6.06 6.06 6.06 6 .05 1 4.10 Trade payable - - - - - Financial guarantee liability 107.03 102.22 112.27 - - ESOP Trust Unsecured loan availed * 648.86 265.00 241.99 265.00 265.00 * Reduced from Equity KTMCPL Dues from related parties - - - - 4 .16 Interest accrued on loan given 1.81 - 0.38 - - Loan given 39.00 - 39.00 - - Financial guarantee liability 111.85 106.50 117.18 - - KTTCPL Dues from related parties - - - - 1 .09

(n) In the books of Aequs Rajas Extrusion Private Limited (AREPL) AL Interest accrued but not due on borrowings 2.13 1.28 1.72 0 .88 - Loans from related parties (unsecured) 7.40 7.40 7.40 7 .40 - Dues to related parties 0.00 - 0 .00 - - ASMIPL Dues to related parties - - - 0 .00 - AFCPPL Dues to related parties 0.02 - 0.02 - -

(o) In the books of AeroStructures Manufacturing India Private Limited (ASMIPL) AABV Dues from related parties 117.96 117.96 117.96 1 17.96 1 17.96 AAF Corp Trade payable 0.59 4.05 8.52 8 .27 8 .90 AAI Trade payable 2.31 2.42 3.41 1 .46 0 .82 Trade receivables 1.09 1.99 1.38 0 .94 0 .34 Dues to related parties - - - - - Dues from related parties - - 0.07 - 0 .10 (This space is intentionally left blank) 497Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the balance outstanding eliminated as at September 30, 2025, September 30, 2024, March 31, 2025, March 31, 2024 and March 31, 2023:

As at As at As at As at As at Particulars 30 September 2025 30 September 2024 March 31, 2025 March 31, 2024 March 31, 2023

(o) In the books of AeroStructures Manufacturing India Private Limited (ASMIPL) (continued) AALLC Interest accrued on loan given 100.67 103.33 85.55 9 0.60 6 3.19 Loan given 275.03 259.50 264.93 2 58.46 2 54.67 AAM Trade payable 128.10 57.35 85.95 4 3.80 9 .34 Trade receivables 346.05 313.77 276.89 2 66.95 1 90.10 ACPPL Trade receivables 3.01 0.62 3.01 0 .62 - Dues from related parties 7.72 4.35 2.86 4 .25 2 .79 Dues to related parties - - 0.02 - 0 .96 Loan given 100.00 - - - - Interest accrued on loan given 0.28 - - - - AEPPL Dues from related parties - - - 0 .01 0 .30 AFCPPL Dues from related parties - - - 0 .00 0 .06 Trade payable - 0.00 - - - AL Dues to related parties - - - 3 .91 - Trade payable 1.19 0.61 1.46 1 .84 6 .74 Trade receivables 0.20 0.31 0.23 0 .00 0 .23 Advance to related parties - - - - 1 69.55 Dues from related parties - - 0.26 0 .31 - Financial guarantee asset 24.50 20.04 219.51 - - ATPL Dues from related parties - - - 0 .03 0 .21 KTMCPL Trade receivables - - - 0 .00 - KTTCPL Dues from related parties - - 0.00 0 .00 - AMHPL Dues from related parties - - - - 2 .06 AREPL Dues from related parties - - 0.00 0.00 -

(p) In the books of Aequs Toys Private Limited (ATPL) ACPPL Trade receivables 0.11 - - - - AEPPL - - Dues to related parties - - - 2 .78 5 .49 Trade payable 0.13 0.14 3.29 0 .21 0 .86 Trade receivables 14.79 - 4.24 - - Dues from related parties - - 0.15 - 0 .04 AFCPPL Dues to related parties 0.06 0.06 0.06 0 .06 - Trade payable 9.84 7.76 9.73 7 .60 3 .41 Trade receivables - - - 0 .38 - 498Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the balance outstanding eliminated as at September 30, 2025, September 30, 2024, March 31, 2025, March 31, 2024 and March 31, 2023:

As at As at As at As at As at Particulars 30 September 2025 30 September 2024 March 31, 2025 March 31, 2024 March 31, 2023

(p) In the books of Aequs Toys Private Limited (ATPL) (continued) AL Dues to related parties 6.06 6.06 6.06 6 .05 1 4.10 Trade payable 1.22 1.22 1.22 1 .22 0 .73 Interest accrued but not due on borrowings 4.65 0.04 1.02 - - Loans from related parties (unsecured) 115.00 15.00 100.00 - - Dues from related parties - - - - - Financial guarantee asset 68.11 50.46 112.27 - - ASMIPL Dues to related parties - - - 0 .03 0 .21 KTMCPL Trade payable 4.84 2.34 1.39 1 .02 2 .68 Trade receivables 3.85 0.11 - 0 .09 - Dues from related parties - - - - 0 .93 Dues to related parties - - - - 0 .01 AMHPL Dues to related parties - - - - 0 .01 KTTCPL Dues from related parties - - - - 0 .07 AAI Dues to related parties 0.02 - 0.02 - -

(q) In the books of Koppal Toys Molding COE Private Limited (KTMCPL) AEPPL Dues to related parties - - - 2 .36 0 .74 Capital creditors - - - - 4 .66 Dues from related parties - - - - 0 .04 Trade payable 7.01 - - - 0 .10 Trade receivables 30.04 - - - - AFCPPL Trade receivables - 0.06 - 0.09 - Capital creditors - - - - 3 .61 Trade payable 4.82 1.87 3.21 - 1 .25 Dues to related parties - 0.03 0.03 - - Deferred Business Consideration - - - 3 4.89 - ASMIPL Dues to related parties - - - 0 .00 - ATPL Trade payable 3.85 2.34 - 0 .09 - Trade receivables 4.84 0.11 1.41 1 .02 2 .72 Dues from related parties - - - - 0 .01 Dues to related parties - - - - 0 .93 KTTCPL Interest accrued but not due on borrowings - - - 0 .04 - Unsecured borrowings - - - 4 .00 - AL Dues to related parties - - - - 4 .16 Loans from related parties (unsecured) 39.00 - 39.00 - - Interest accrued but not due on borrowings 1.81 - 0.38 - - Financial guarantee asset 82.50 86.00 117.18 - - 499Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 35 - Related party transaction prior to elimination (As per Schedule VI (Para 11(I)(A)(i)(g)) of ICDR Regulations).

The following are the details of the balance outstanding eliminated as at September 30, 2025, September 30, 2024, March 31, 2025, March 31, 2024 and March 31, 2023:

As at As at As at As at As at Particulars 30 September 2025 30 September 2024 March 31, 2025 March 31, 2024 March 31, 2023

(r) In the books of Koppal Toys Tooling COE Private Limited (KTTCPL) ASMIPL Dues to related parties - - - 0 .00 - KTMCPL Interest accrued on loan given - - - 0 .04 - Unsecured loan given - - - 4 .00 - ACPPL Dues to related parties - - - - 0 .05 AEPPL Dues to related parties - - - - 0 .38 Dues from related parties - - - - 0 .34 AL Dues to related parties - - - - 1 .09 ATPL Dues to related parties - - - - 0 .07 AFCPPL Deferred Business Consideration Payable - 34.89 - 34.89 - Dues to related parties - - - - 0 .11 Dues from related parties - - - - 0 .13

(s) In the books of Aequs Force Technology Company Limited (AFTCL) AFCPPL Dues from related parties - - - - 3 9.78

(t) In the books of Aequs Toys Hong kong Private Limited ('ATHPL') AEPPL Trade receivables - - - - 0 .51

(u) In the books of Bernar SAS ('Bernar') AAF Corp Dues to related parties - - - - 7 2.55 Loan from related parties - - - - 3 50.57 Trade payable - - - - 7 .98 Trade payable - - - - -

(v) In the books of SCI Du Champ De Pivoines (SCI Du) AAF Corp Dues from related parties - - - - 3 5.66 Loan to related parties - - - - - Trade payable - - - - 1 3.38 (This space is intentionally left blank) 500Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 36 - Net debt reconciliation Particulars As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Cash and cash equivalents 571.93 657.17 609.43 792.74 512.87 Bank balances other than above 226.31 754.75 188.48 1,727.01 60.81 Lease liabilities (3,353.37) (3,964.09) (3,479.85) (4,070.50) (3,897.86) Non-current borrowings (2,794.82) (1,522.63) (1,886.17) (1,073.91) (977.87) Current borrowings (2,540.29) (2,325.23) (2,484.45) (1,844.90) (1,908.13) Compulsorily Convertible Preference Shares - - - - (575.39) Net debt (7,890.24) (6,400.03) (7,052.56) (4,469.56) (6,785.57)

Net debt reconciliation:

Cash and cash Liabilities from financing activities Total equivalents and Lease obligations Non-current Current borrowings Compulsory other bank balances borrowings Convertible Preference Shares Net debt as at April 1, 2022 856.02 (2,879.80) (1,066.67) (1,939.90) - (5,030.35) Cashflows (276.77) - - 32.02 - (244.75) New leases/ new borrowings - (1,311.25) (257.61) - (641.00) (2,209.86) Foreign exchange adjustments 14.26 (69.03) (15.37) (9.01) - (79.15) Repayments - 362.22 282.90 - - 645.12 Interest expense - (240.28) (82.96) (156.00) - (479.24) Interest paid - 240.28 76.58 132.44 - 449.30 Transaction cost - - - - 65.61 65.61 Reclassification during the year - - 31.91 1.02 - 32.93 Transferred to asset held for sale or liabilities pertaining to assets held for sale (19.47) - 8.87 - - (10.60) Other Non-cash adjustments: - - 44.48 31.30 - 75.78 Net debt as at March 31, 2023 574.04 (3,897.86) (977.87) (1,908.13) (575.39) (6,785.21) Cashflows 1,976.34 - - - - 1,976.34 New leases/ new borrowings - (658.00) (904.00) (76.00) 0.39 (1,637.61) Foreign exchange adjustments (30.27) 16.95 (0.04) (7.53) - (20.89) Repayments - 468.41 797.49 155.00 - 1,420.90 Interest expense - (303.76) (111.29) (208.05) - (623.10) Interest paid - 303.76 110.80 213.63 - 628.19 Other non-cash adjustments - - 11.00 (14.00) 575.00 572.00 Net debt as at March 31, 2024 2,520.11 (4,070.50) (1,073.91) (1,845.08) - (4,469.38) Cashflows (1,761.32) - - (641.82) - (2,403.14) New leases/ new borrowings - (199.77) (1,107.91) - - (1,307.69) Foreign exchange adjustments 39.12 (37.46) (45.55) 6.60 - (37.29) Repayments - 561.63 345.06 (0.00) - 906.70 Interest expense - (275.63) (31.86) (164.40) - (471.89) Interest paid - 346.18 123.43 142.52 - 612.13 Other non-cash adjustments - 195.70 (95.43) 17.73 - 118.00 Net debt as at March 31, 2025 797.91 (3,479.85) (1,886.17) (2,484.45) - (7,052.56) Net debt as at March 31, 2024 2,520.11 (4,070.50) (1,073.91) (1,845.08) - (4,469.38) Cashflows (1,071.68) - - (468.53) - (1,540.21) New leases/ new borrowings - (197.70) (588.54) - - (786.24) Foreign exchange adjustments (36.51) (32.69) ( 4.55) (10.93) - (84.68) Repayments - 271.96 149.63 - - 421.59 Interest expense* - (143.70) (32.51) (79.28) - (255.49) Interest paid - 1 72.82 69.19 77.40 - 319.41 Other non-cash adjustments - 35.72 (41.94) 1.20 - (5.02) Net debt as at September 30, 2024 1,411.92 (3,964.09) ( 1,522.63) (2,325.22) - (6,400.02) Net debt as at March 31, 2025 7 97.91 (3,479.85) (1,886.17) (2,484.45) - (7,052.56) Cashflows 140.07 - - (103.13) - 36.94 New leases/ new borrowings - (117.25) (1,142.37) - - (1,259.62) Foreign exchange adjustments (139.74) (99.87) 21.56 60.26 - (157.79) Repayments - 333.03 239.83 - - 572.86 Interest expense - (132.24) (33.37) (127.77) - (293.38) Interest paid - 151.10 92.60 91.75 - 335.45 Other non-cash adjustments - (8.29) (86.90) 23.05 - (72.14) Net debt as at September 30, 2025 798.24 (3,353.37) (2,794.82) (2,540.29) - (7,890.24)

Note: *Interest on term loans in one of the subsidiaries INR 97.79 Mn has been paid during the year. The same has been capitalised in accordance with Ind AS 23 Borrowing cost.

501Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to the Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 37 - Assets pledged as security Thecarryingamountofassetspledgedassecurityforcurrentandnon-currentborrowingsarebelow.Theamountsareasdisclosedinthestandalonefinancialstatementsoftheentitiesincludedin consolidation without adjusting for inter-company eliminations.

As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Current A. Financial assets: - Trade receivables 1,986.38 1,705.21 1,608.96 1,579.14 1,268.92 - Cash and cash equivalents - - - 2,024.78 96.21 - Other bank balances - - - 44.27 34.10 - Other assets 91.26 61.99 57.00 7.36 21.00 B. Non-financial assets:

- Inventories 3,949.88 3,559.89 3,349.91 3,039.30 2,599.44 - Contract assets - - - - - - Other assets 300.59 72.80 123.54 88.98 166.00 Total current assets pledged as security 6 ,328.11 5,399.89 5,139.41 6,783.83 4,185.67 Non-current - Other financial assets - - - 112.00 A. Non financial assets:

- Property plant and equipment and Capital work-in-progress 7,095.07 3,955.31 4,979.20 4,017.97 2,967.83 - Other non-current assets - - - - 30.71 Total non-current assets pledged as security 7 ,095.07 3 ,955.31 4 ,979.20 4,017.97 3,110.54 Total assets pledged as security 13,423.18 9,355.20 10,118.61 10,801.80 7,296.21 Note 38 - Dues to micro, small and medium enterprises TheGrouphasaprocessofidentifyingMicro,SmallandMediumEnterprises(MSME),asdefinedundertheMicro,SmallandMediumEnterprisesDevelopmentAct,2006(MSMEDAct),by requestingvendorconfirmationtotheletterscirculatedbytheGroup.Disclosuresofdues/paymentstoMicro,SmallandMediumEnterprisestotheextentsuchenterprisesareidentifiedbythe Group,basedontheresponsesreceivedfromvendorsagainstrequestforconfirmations.Thisinformationhasbeendeterminedtotheextentsuchpartieshavebeenidentifiedonthebasisof information available with the Company.

Particulars As at As at As at As at As at September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023

(i)PrincipalamountduetothesuppliersregisteredunderMSMEDActandremainingunpaidat 43.17 0.65 7 3.56 9 .99 1 .63 the end of each accounting period / year;

(ii)InterestduetosuppliersregisteredunderMSMEDActandremainingunpaidasattheendof 1.44 - 1 .38 0 .01 0 .35 each accounting period / year

(iii)Theamountofinterestpaidbythebuyerintermsofsection16oftheMSMEDAct,2006, 0.17 0.99 2 .12 0 .12 0 .64 alongwiththeamountofthepaymentmadetothesupplierbeyondtheappointeddayduringthe period / year

(iv)Theamountofinterestdueandpayablefortheperiodofdelayinmakingpayment(which - - 0 .72 0 .00 0 .01 havebeenpaidbutbeyondtheappointeddayduringtheperiod/year)butwithoutaddingthe interest specified under the MSMED Act, 2006

(v) Principal amounts paid to suppliers registered under the MSMED Act, beyond the appointed 107.44 52.89 1 31.09 1 5.91 4 8.27 day during the period / year

(vi)Theamountofinterestaccruedandremainingunpaidattheendofeachaccountingperiod/ 1.44 - - 0 .00 0 .36 year; and

(vii)Theamountoffurtherinterestremainingdueandpayableeveninthesucceedingyears, - - 0 .00 0 .01 - untilsuchdatewhentheinterestduesaboveareactuallypaidtothesmallenterprise,forthe purposeofdisallowanceofadeductibleexpenditureundersection23oftheMSMEDAct,2006 Further due and remaining for the earlier years.

(This space is intentionally left blank) 502Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 39 - Income tax expense Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Current tax Current tax on profits of the period / year 109.91 6 7.58 148.88 115.13 12.02 Total current tax expense (A) 109.91 6 7.58 148.88 115.13 12.02 Deferred tax Deferred tax expense for the period / year 2.76 (10.53) (65.48) (15.47) 48.47 Total deferred tax expense/(benefit) (B) 2.76 (10.53) (65.48) (15.47) 48.47 Income tax expense/ (benefit) (A+B) 112.67 5 7.05 83.40 99.66 60.49 Reconciliation of tax expense and the accounting profit multiplied by applicable tax rate Six months ended Six months ended Year ended Year ended Year ended Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Tax expenses under general provision of income tax Profit before income tax expense ( 54.17) (659.06) (940.79) (42.78) (1,011.00) Tax rate 27.82% 27.82% 27.82% 27.82% 27.82% Tax at the above rate ( 15.07) (183.35) (261.73) (11.90) (281.26) Tax impact of permanent differences 20.80 3 0.67 45.66 20.10 16.71 Tax impact of income not chargeable to tax ( 16.60) (19.00) (34.25) 42.05 (4.20) Tax impact related to prior year adjustments - - - - (9.22) Tax impact of entities in tax holidays ( 13.09) (38.10) (74.45) (91.02) 17.40 Tax impact of unabsorbed depreciation on which no deferred tax has been recognized - - - (0.87) 24.67 Tax impact of business loss and other items on which no deferred tax has been recognized* 87.29 2 31.96 278.76 194.95 343.32 Tax impact due to differential tax rates applicable to subsidiaries 64.37 4 1.18 121.15 (40.03) - Others ( 15.03) (6.31) 8.26 (13.62) (46.69) Total tax expense/(benefit) 112.67 5 7.05 83.40 99.66 60.73 *TheGrouphasrecogniseddeferredtaxassetoncarriedforwardlossesandunabsorbedtaxlossesduringtheyear/periodandpreviousyearswithrespecttotheParentCompanyandAerostructureManufacturingIndiaPrivateLimitedonthebasisofprojections totheextentitisprobablethatsufficienttaxableprofitwillbeavailableagainstwhichtheunusedtaxlossescanbeutilizedbytherespectiveentities.Inrespectofotherentities,theGrouphasnotrecognisedthedeferredtaxassetintheabsenceofreasonable certainty supported by convincing evidence that sufficient future taxable income will be available for set-off.

Tax losses for which no deferred tax asset was recognised expire as follows Period ended Expiry date Period ended Expiry date Year ended Expiry date Year ended Expiry date Year ended Expiry date September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Expire 3,669.33 2034-35 3 ,040.71 2033-34 3,041.20 2033-34 2,612.22 2032-33 2,266.18 2025-32 Never expire 2,594.12 - 2 ,135.98 - 2,545.41 - 1,357.64 - 1,183.07 - (This space is intentionally left blank) 503Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 39 - Income tax expense (continued) Deferred tax assets (net) As at As at As at As at As at Particulars September 30, 2025 September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Deferred tax liabilities Property, plant and equipment and Intangible assets ( 14.61) (49.43) (40.32) (42.49) (126.28) Right-of-use assets ( 144.78) (147.49) (142.10) (215.17) (121.37) ( 159.39) (196.92) (182.42) (257.66) (247.65) Deferred tax assets Tax losses carried forward 58.63 8 4.23 72.68 122.32 141.87 MAT credit entitlement 25.44 7 4.52 37.26 95.83 95.83 Impairment of loss on investment - - - - - Lease liabilities 196.23 2 15.37 207.32 221.52 131.97 Inventories 61.63 4 7.35 52.75 42.44 20.40 Others 148.53 8 9.14 144.11 100.02 166.58

490.46 5 10.61 514.12 582.13 556.65 Deferred tax assets (net) 331.07 3 13.69 331.70 324.47 309.00

(a) Movement in deferred tax liabilities Depreciation and Right-of-use Total Particulars amortisation assets Balance at April 1, 2022 137.56 66.42 203.98 Recognised in profit or loss (11.28) 54.95 43.67 Balance at March 31, 2023 126.28 121.37 247.65 Balance at April 1, 2023 126.28 121.37 247.65 Recognised in profit or loss (83.79) 93.80 10.01 Balance at March 31, 2024 42.49 215.17 257.66 Balance at April 1, 2024 42.49 215.17 257.66 Recognised in profit or loss (2.17) (73.07) (75.24) Balance at March 31, 2025 40.32 142.10 182.42 Balance at April 1, 2024 42.49 215.17 257.66 Recognised in profit or loss 6.94 (67.68) (60.74) Balance at September 30, 2024 49.43 147.49 196.92 Balance at April 1, 2025 40.32 142.10 182.42 Recognised in profit or loss (25.71) 2.68 (23.03) Balance at September 30, 2025 14.61 144.78 159.39 (This space is intentionally left blank) 504Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 39 - Income tax expense (continued)

(b) Movement in deferred tax assets Tax losses carried MAT credit Impairment of loss Lease liabilities Inventories Others Total Particulars forward entitlement on investment Balance at April 1, 2022 198.34 98.55 64.00 4 8.08 11.76 145.60 566.33 Recognised in profit or loss (56.47) - ( 64.00) 8 3.89 8.64 23.14 (4.80) MAT credit utilisation (2.72) - - - - (2.72) Recognised in OCI - - - - - (2.16) (2.16) Balance at March 31, 2023 141.87 95.83 - 1 31.97 20.40 166.58 556.65 Balance at April 1, 2023 141.87 95.83 - 1 31.97 20.40 166.58 556.65 Recognised in profit or loss (19.55) - - 8 9.55 22.04 (66.56) 25.48 Recognised in OCI - - - - - - - Balance at March 31, 2024 122.32 95.83 - 2 21.52 42.44 100.02 582.13 Balance at April 1, 2024 122.32 95.83 - 2 21.52 42.44 100.02 582.13 Recognised in profit or loss (49.64) - - (14.20) 10.31 44.09 (9.44) Recognised in OCI - - - - - - - MAT credit utilisation - (58.57) - - - - (58.57) Balance at March 31, 2025 72.68 37.26 - 2 07.32 52.75 144.11 514.12 Balance at April 1, 2024 122.32 95.83 - 2 21.52 42.44 100.02 582.13 Recognised in profit or loss (38.09) - - (6.15) 4.91 (10.88) (50.21) Recognised in OCI - - - - - - - MAT credit utilisation - (21.31) - - - - (21.31) Balance at September 30, 2024 84.23 74.52 - 2 15.37 47.35 89.14 510.61 Balance at April 1, 2025 72.68 37.26 - 2 07.32 52.75 144.11 514.12 Recognised in profit or loss (14.05) (11.82) (11.09) 8.88 2.29 (25.79) Recognised in OCI - - - - - - - Others - - - - - 2.13 2.13 Balance at September 30, 2025 58.63 25.44 - 1 96.23 61.63 148.53 490.46

(a) Transfer pricing:

TheFinanceAct,2001,hasintroduced,witheffectfromassessmentyear2002-03(effectiveApril1,2001),detailedTransferPricingRegulations(theregulations)forcomputingthetaxableincomeandexpenditurefrom‘internationaltransactions'between ‘associatedenterprises’onan‘arm’slength’basis.Further,theFinanceAct,2012haswidenedtheambitoftransferpricingprovisionstocoverspecifieddomestictransactions.Theregulations,interalia,alsorequirethemaintenanceofprescribeddocumentsand information including furnishing a report from an accountant within the due date of filing the return of income.

FortheyearendedMarch31,2025,March31,2024andMarch31,2023,theGrouphadundertakenastudytocomplywiththesaidtransferpricingregulationsforwhichtheprescribedcertificateoftheaccountanthasbeenobtainedwhichdoesnotenvisageany tax liability.

Thetaximpactfortheabovepurposehasbeenarrivedatbyapplyingtaxrateof27.82%(September30,2024:27.82%,March31,2025:27.82%,March31,2024:27.82%,March31,2023:27.82%) beingthesubstantivelyenactedprevailingtaxrateforIndian Companies under Income the Tax Act, 1961.

(This space is intentionally left blank) 505Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 40 - Interest in other entities

(a) Subsidiaries The Group's subsidiaries are set out below. Unless otherwise stated, they have share capital consisting solely of equity shares that are held directly by Group, and the proportion of ownership interests held equals the voting rights held by the Group. The country of incorporation or Name of the entity Principal place Ownership interest held by the Group Ownership interest held by non-controlling interests Principal activities as at September 30, 2025 of business and As at As at As at As at As at As at As at As at As at As at place of September 30, September 30, March 31, March 31, March 31, September 30, September 30, March 31, March 31, March 31, incorporation 2025 2024 2025 2024 2023 2025 2024 2025 2024 2023 Indian Subsidiaries AeroStructures Manufacturing India Private Limited (ASMIPL) India 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Contract manufacturing Aerospace Manufacturing Holdings Private Limited (AMHPL) India 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Investment holding Aequs Force Consumer Products Private Limited (AFCPPL) India 100.00% 100.00% 100.00% 100.00% 74.00% 0.00% 0.00% 0.00% 0.00% 26.00%Contract manufacturing Aequs Force Technology Private Limited (AFTPL) India 100.00% 100.00% 100.00% 100.00% 74.00% 0.00% 0.00% 0.00% 0.00% 26.00%Liquidated w.e.f. December 27, 2024 Aequs Engineered Plastics Private Limited (AEPPL) India 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Contract manufacturing Aequs Consumer Products Private Limited (ACPPL) India 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Contract manufacturing Aequs Home Appliances Private Limited (AHAPL) India 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Struck off w.e.f. June 27, 2025 Aequs Toys Private Limited (ATPL) India 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Contract manufacturing Koppal Toys Molding COE Private Limited (KTMCPL) India 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Contract manufacturing Koppal Toys Tooling COE Private Limited (KTTCPL) India 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Struck off w.e.f. November 30, 2024 Aerostructures Assemblies India Private Limited (AAI) India 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Contract manufacturing Aequs Material Management Private Limited (AMMPL) India 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Struck off w.e.f. June 29, 2024 Aequs Rajas Extrusion Private Limited (AREPL) India 100.00% 100.00% 100.00% 100.00% 26.00% 0.00% 0.00% 0.00% 0.00% 74.00%Struck off w.e.f. June 19, 2023 Foreign Subsidiaries Aequs Aerospace France SAS (AAF Corp) France 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Contract manufacturing Aequs Aerospace BV (AABV) Netherlands 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Investment holding Aequs Aerospace LLC (AALLC) USA 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Investment holding Aequs Holdings France SAS (AHF) France 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Investment holding Aequs Aero Machine Inc. (AAM) USA 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Contract manufacturing Aequs Oil and Gas LLC (AOGLLC) USA 95.00% 95.00% 95.00% 95.00% 95.00% 5.00% 5.00% 5.00% 5.00% 5.00%Discontinued operations Bernar SAS (Bernar) France 0.00% 0.00% 0.00% 0.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Merged w.ef April 01, 2023 SCI Du Champ De Pivoines (SCI Du) France 0.00% 0.00% 0.00% 0.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Merged w.ef April 01, 2023 Aequs Force Technology Company Limited (AFTCL) Hong Kong 100.00% 100.00% 100.00% 100.00% 74.00% 0.00% 0.00% 0.00% 0.00% 26.00%Liquidated w.e.f. December 27, 2024 Aequs Toys Hong kong Private Limited (ATHPL) Hong Kong 100.00% 100.00% 100.00% 100.00% 100.00% 0.00% 0.00% 0.00% 0.00% 0.00%Discontinued operations (This space is intentionally left blank) 506Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 40 - Interest in other entities (continued)

(b) Non-controlling interests (NCI) Setoutbelowissummarizedfinancialinformationofeachsubsidiarythathasnon-controllingintereststhatarematerialtotheGroup.Theamountdisclosedforeachsubsidiaryarebeforeinter-companyeliminations.ThenoncontrollinginterestpertainingtoAequsOilandGasLLCof₹(8.91)(September30,2024₹ (5.94), March 31, 2025 ₹ (1.34), March 31, 2024 ₹ (1.00) and March 31,2023 ₹ (10.00) is not disclosed as the same is pertaining to discontinued operations.

During the year ended March 31, 2023, Parent Company has acquired the entire NCI in AFCPPL for a consideration of ₹100.00. Hence, disclosure for the year ended March 31, 2025 and March 31, 2024 under this note would not be applicable. The loss pertaining to NCI portion till the date of acquisition is ₹ (34.00).

Summarised balance sheet AFCPPL AFTCL (HONG KONG) Total As at As at As at As at As at As at As at As at As at As at As at As at As at As at As at September 30, September 30, March 31, March 31, March 31, September 30, September 30, March 31, March 31, March 31, September 30, September 30, March 31, March 31, March 31, 2025 2024 2025 2024 2023 2025 2024 2025 2024 2023 2025 2024 2025 2024 2023 Current assets Not Applicable Not Applicable Not Applicable Not Applicable 340.07 Not Applicable Not Applicable Not Applicable Not Applicable 42.47 Not Applicable Not Applicable Not Applicable Not Applicable 3 82.54 Current liabilities 339.32 39.84 3 79.16 Net current assets 0.75 2.63 3.38 Non-current assets 829.54 - 8 29.54 Non-current liabilities 575.63 5 75.63 Net non-current assets 253.91 - 2 53.91 Net assets 254.66 2.63 257.29 Accumulated non-controlling interest (104.15) 0.60 (103.55) Summarised statement of profit and loss AFCPPL AFTCL (HONG KONG) Total Period ended Period ended Year ended Y ear ended Y ear ended P e riod ended Period ended Year ended Y ear ended Y ear ended P e riod ended Period ended Year ended Y ear ended Y ear ended September 30, September 30, March 31, March 31, March 31, September 30, September 30, March 31, March 31, March 31, September 30, September 30, March 31, March 31, March 31, 2025 2024 2025 2024 2023 2025 2024 2025 2024 2023 2025 2024 2025 2024 2023 Revenue Not Applicable Not Applicable Not Applicable Not Applicable 7 52.24 Not Applicable Not Applicable Not Applicable Not Applicable 1 9.97 Not Applicable Not Applicable Not Applicable Not Applicable 7 72.21 Profit/(loss) for the year (297.74) 1 9.97 (277.77) Other comprehensive income/(loss) - 0.02 0.02 Total comprehensive income/(loss) - - - - (297.74) - - - - 1 9.99 - - - - (277.75) Profit/ (loss) allocated to Non-controlling interest - - - - (114.89) - - - - 7.68 - - - - (107.21) Summarised cash flow AFCPPL AFTCL (HONG KONG) Total Period ended Period ended Year ended Y ear ended Y ear ended P e riod ended Period ended Year ended Y ear ended Y ear ended P e riod ended Period ended Year ended Y ear ended Y ear ended September 30, September 30, March 31, March 31, March 31, September 30, September 30, March 31, March 31, March 31, September 30, September 30, March 31, March 31, March 31, 2025 2024 2025 2024 2023 2025 2024 2025 2024 2023 2025 2024 2025 2024 2023 Cash flow from operating activities Not Applicable Not Applicable Not Applicable Not Applicable (82.20) Not Applicable Not Applicable Not Applicable Not Applicable (0.31) Not Applicable Not Applicable Not Applicable Not Applicable (82.51) Cash flow from investing activities (17.84) - (17.84) Cash flow from financing activities 1 30.39 - 1 30.39 Net increases/(decrease) in cash and cash equivalents - - - - 3 0.35 - - - - (0.31) - - - - 3 0.04

(c) Interests in associate and joint ventures Set out below are the associates and the joint ventures of the Group, which, in opinion of the directors, are material to the Group. The entities listed below have share capital consisting solely to equity shares, which are held directly by the Group. The country of incorporation or registration is also their financial place of business, and the proportion of ownership interests is the same as the proportion of voting rights held.

Name of the entity Principal place % of Relationship Accounting Carrying amount of business and ownership method 30-Sep-25 30-Sep-24 31-Mar-24 31-Mar-23 31-Mar-22 SQuAD Forging India Private Limited (SQuAD) India 50% Joint Venture Equity Method 5 43.33 4 68.43 497.15 443.58 435.61 Aerospace Processing India Private Limited (API) India 50% Joint Venture Equity Method 2 69.74 2 06.73 238.96 178.03 139.29 Aequs Cookware Private Limited (ACPL) India 50% Joint Venture Equity Method - 4 1.50 32.01 - - Aequs Foundation India 50% Associates Equity Method - - - - 0.00 Aequs Rajas Extruction Private Limited (AREPL) India 26% Joint Venture Equity Method - - - - 0.00 Total 8 13.07 7 16.66 7 68.12 6 21.61 5 74.90 All the above mentioned entities are unlisted and hence, no quoted prices are available.

(b) Refer note 7 for amont recognised as financial liability in excess of Group's share of losses over its investments.

AsatSeptember30,2025September30,2024, March31,2025andMarch31,2024,AequsRajasExtrusionPrivateLimited(AREPL)isawhollyownedsubsidiaryoftheGroup.AsatMarch31,2023,AREPLwasanassociate.Hence,thedisclosuresforthe six months period ended September 30, 2025, six months period ended September 30, 2024 ,year ended March 31, 2025, year ended March 31, 2024 do not apply.

(This space is intentionally left blank) 507Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 40 - Interest in other entities (continued) ii) Commitments and Contingent liabilities in respect of associates and joint ventures Particulars API SQuAD ACPL As at As at As at As at As at As at As at As at As at As at As at As at As at As at As at September 30, September 30, March 31, March 31, March 31, September 30, September 30, March 31, March 31, March 31, September 30, September 30, March 31, March 31, March 31, 2025 2024 2025 2024 2023 2025 2024 2025 2024 2023 2025 2024 2025 2024 2023 Commitments of JVs and Associates. 2.41 3 1.42 4.92 111.12 29.32 3 5.32 1 0.37 37.66 2.33 1.44 116.30 - 1 30.15 Not Applicable Not Applicable Contingent liabilities of JVs and Associates. - - - - 0.31 - - - - 4.00 - - - Total 2.41 31.42 4.92 111.12 29.63 35.32 10.37 37.66 2.33 5.44 116.30 - 130.15 - - Particulars AREPL As at As at As at As at As at September 30, September 30, March 31, March 31, March 31, 2025 2024 2025 2024 2023 Commitments of JVs and Associates. - - - Not Applicable Not Applicable Contingent liabilities of JVs and Associates. - - - Total - - - - - iii) Summarized financial information of associates and joint ventures The table below provides summarized financial information for those joint ventures that are material to the Group. The information disclosed reflects the amount presented in the financial statements of the relevant joint ventures.

Summarised balance sheet API SQuAD ACPL As at As at As at As at As at As at As at As at As at As at As at As at As at As at As at September 30, September 30, March 31, March 31, March 31, September 30, September 30, March 31, March 31, March 31, September 30, September 30, March 31, March 31, March 31, 2025 2024 2025 2024 2023 2025 2024 2025 2024 2023 2025 2024 2025 2024 2023 Current assets Not Applicable Not Applicable Cash and cash equivalents 8 2.35 5 8.54 3 1.34 4 4.94 2 9.24 5 8.18 5 1.04 1 4.18 4 0.53 2 6.82 2.42 0.10 4 1.36 Trade receivables 1 92.49 1 62.89 1 85.15 1 37.78 1 00.56 1 97.45 1 06.84 1 15.94 1 01.24 5 1.00 1 08.47 4 3.91 Other financial assets - - - - 0.20 6 0.91 2 8.25 2 5.48 0.26 3.35 2 4.49 2 1.29 Other assets(including inventories) 7 1.13 5 5.70 6 2.42 7 4.33 4 3.27 4 29.70 3 52.43 4 40.30 3 34.28 2 82.37 1 61.59 1 69.05 Total current assets 3 45.97 2 77.13 2 78.91 2 57.05 1 73.27 7 46.24 5 38.55 5 95.90 4 76.31 3 63.54 2 96.97 0.10 2 75.61 Total non-current assets 6 94.62 4 68.20 7 21.28 3 64.19 3 69.42 8 02.83 7 93.17 7 92.59 7 96.24 8 29.59 5 25.07 4 81.00 Current liabilities Trade payables 5 1.36 5 1.61 4 7.29 3 0.84 2 5.73 1 83.43 9 6.76 1 39.97 8 9.77 1 52.94 1 11.65 5 9.35 Financial liabilities (excluding trade payables) 8 7.63 1 12.15 9 8.44 8 3.44 6 1.10 9 0.43 1 58.92 1 30.78 1 36.91 1 19.64 2 12.65 8 1.31 Other liabilities 2 2.35 2 0.14 1 1.08 1 9.30 8.64 8 7.62 6.67 9.67 5.96 1 3.10 3 7.37 6 4.44 Total current liabilities 1 61.34 1 83.90 1 56.81 1 33.58 9 5.47 3 61.48 2 62.34 2 80.42 2 32.64 2 85.68 3 61.67 - 2 05.10 Total non-current liabilities 3 80.91 1 90.52 4 06.60 1 72.16 2 02.77 8.45 4 1.74 2 1.53 6 1.44 9 9.08 4 97.90 5 02.24 Financial liabilities (excluding trade payables) 3 51.52 1 58.32 3 75.89 1 39.96 1 69.23 0.00 3 3.09 1 3.67 5 3.17 9 3.25 4 94.93 4 99.26 Other liabilities 2 9.39 3 2.20 3 0.71 3 2.20 3 3.54 8.45 8.66 7.86 8.27 5.83 2.98 2.98 Total non current liabilities 3 80.91 1 90.52 4 06.60 1 72.16 2 02.77 8.45 4 1.75 2 1.53 6 1.44 9 9.08 4 97.91 - 5 02.24 Net assets 4 98.34 3 70.91 4 36.79 3 15.50 2 44.45 1 ,179.14 1 ,027.63 1 ,086.54 9 78.47 8 08.37 (37.54) 0.10 4 9.27 Summarised balance sheet AREPL As at As at As at As at As at September 30, September 30, March 31, March 31, March 31, 2025 2024 2025 2024 2023 Current assets Not Applicable Not Applicable Not Applicable Not Applicable Cash and cash equivalents - Trade receivables 0.20 Other financial assets - Other assets(including inventories) - Total current assets 0.20 Total non-current assets 4.95 Current liabilities Trade payables 1.57 Financial liabilities (excluding trade payables) 7.81 Other liabilities 0.02 Total current liabilities 9.40 Total non-current liabilities - Financial liabilities (excluding trade payables) - Other liabilities - Total non current liabilities - Net assets (4.25) 508Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 40 - Interest in other entities (continued) iii) Summarized financial information of associates and joint ventures (continued) Summarised statement of profit and loss API SQuAD ACPL For the period / year ended For the period / year ended For the period / year ended 30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 Revenue 3 71.11 3 16.99 6 53.65 5 17.70 4 07.47 5 16.76 3 87.89 8 50.33 6 19.50 4 83.93 2 23.68 Not Applicable 1 60.05 Not Applicable Not Applicable Interest income /Other income 6.99 3.11 8.18 2 7.65 6.21 1 1.88 3.40 1 2.49 7.73 2 9.45 6.21 3 3.69 Operating expenses (237.66) (209.57) (422.02) (379.96) (312.58) (406.68) (308.37) (693.03) (506.88) (460.08) (249.00) (187.73) Depreciation and amortisation (47.79) (25.57) (55.83) (53.01) (52.25) (21.28) (23.00) (45.00) (53.01) (56.44) (27.92) (27.66) Finance cost/(Income) (19.62) (8.25) (12.10) (21.01) (30.62) (8.32) (11.01) (20.88) (28.28) (31.30) (39.23) (33.20) Income tax expense - (19.31) (50.43) (26.51) (1.11) - - - - - - - Profit/(loss) for the period/year 7 3.03 5 7.40 1 21.45 6 4.86 1 7.12 9 2.36 4 8.91 1 03.91 3 9.06 (34.44) (86.26) (54.86) Other comprehensive income/(loss) (11.48) - (0.16) 0.16 0.74 - - 0.34 (1.04) (0.05) - (0.22) Total comprehensive income/(loss) 6 1.55 5 7.40 1 21.29 6 5.02 1 7.86 9 2.36 4 8.91 1 04.25 3 8.02 (34.49) (86.26) (55.06) AREPL For the period / year ended 30-Sep-25 30-Sep-24 31-Mar-25 31-Mar-24 31-Mar-23 Revenue Not Applicable Not Applicable Not Applicable Not Applicable - Interest income /Other income - Operating expenses (1.70) Depreciation and amortisation - Finance cost/(Income) (1.20) Income tax expense - Profit/(loss) for the period/year (2.90) Other comprehensive income/(loss) - Total comprehensive income/(loss) (2.90) iv) Individually immaterial associates In addition to the interests in associates disclosed above , the Group also had interests in an individually immaterial that is accounted for using the equity method As at As at As at As at As at September 30, September 30, March 31, March 31, March 31, 2025 2024 2025 2024 2023 Aggregate carrying amount of individually immaterial associates Equity share capital - - - - 0.02 Reserves and surplus - - - - (3.73) Aggregate amounts of the Group's share of:

Profit/(loss) from continuing operations - - - - (3.19) Other comprehensive income - - - - - Group's share of total comprehensive income from individually immaterial associates - - - - (1.60) DuringtheyearendedMarch31,2024,theParentCompanysold800equitysharesofAequsFoundation.FurtherduringtheyearendedMarch31,2025,theParentCompanyhassoldreamainingholdingof200equitysharesofAequsFoundation.ThecarryingvalueoftheinvestmentisINRNilasatSeptember30, 2025 and March 31, 2025.

(This space is intentionally left blank) 509Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 41 - Additional information pursuant to paragraph 12.3 of Division II of Schedule III to the Companies Act, 2013- ‘General Instructions for the preparation of consolidated financial statements’ of Division II of Schedule III As at For the period ended For the period ended For the period ended September 30, 2025 September 30, 2025 September 30, 2025 September 30, 2025 Net Assets Net Assets Share in TCI Share in TCI Share in OCI / Share in OCI / Share in profit / Share in profit / As % Amount /(TCL) (TCL) (OCL) (OCL) (loss) (loss) As % Amount As % Amount As % Amount Parent Company Aequs Limited (formerly known as Aequs Private Limited) 130.14% 10,469.58 (9.29%) 40.17 0.00% - 0.50% 40.17 Indian subsidiaries AeroStructures Manufacturing India Private Limited (ASMIPL) 33.92% 2,728.81 (52.96%) 229.03 0.00% - 2.85% 229.03 Aerospace Manufacturing Holdings Private Limited(AMHPL) (0.03%) (2.07) (0.37%) 1.60 0.00% - 0.02% 1.60 Aequs Force Consumer Products Pvt. Ltd. (AFCPPL) 1.71% 137.77 29.38% (127.07) 0.00% - (1.58%) (127.07) Aequs Engineered Plastics Private Limited (AEPPL) 0.70% 56.25 12.30% (53.21) 0.00% - (0.66%) (53.21) Aequs Consumer Products Private Limited (ACPPL) 42.54% 3,422.17 49.73% (215.06) 0.00% - (2.67%) (215.06) Aequs Toys Private Limited (ATPL) 6.17% 496.15 26.52% (114.67) 0.00% - (1.43%) (114.67) Koppal Toys Moulding COE Private Limited (KTMCPL) 2.74% 220.80 0.00% - 0.00% - 0.00% - Aerostructures Assemblies India Private Limited (AAI) 3.57% 287.10 (0.25%) 1.08 0.00% - 0.01% 1.08 Aequs Rajas Extrusion Private Limited (AREPL) (0.09%) (7.02) 0.20% (0.86) 0.00% - (0.01%) (0.86) Foreign subsidiaries Aequs Aerospace France SAS, France (AAF Corp) (1.65%) (132.49) 27.89% (120.60) 29.38% ( 77.19) (0.54%) (43.41) Aequs Aerospace BV (AABV) (25.40%) (2,043.77) 136.58% (590.64) 231.80% ( 608.91) 0.23% 18.27 Aequs Aerospace LLC (AALLC) 11.67% 939.15 2.88% (12.45) 5.77% ( 15.16) 0.03% 2.71 Aequs Aerospace Besancon, France 0.00% - 0.00% - 0.00% - 0.00% - Aequs Holdings France, SAS (AHF) (0.09%) (7.42) (19.17%) 82.92 -31.73% 8 3.35 (0.01%) (0.43) Aequs Aero Machine Inc. (AAM) 4.33% 348.17 4.19% (18.13) 0.12% ( 0.31) (0.22%) (17.82) Aequs Oil and Gas LLC (AOGLLC) (1.49%) (119.88) 16.25% (70.27) 26.94% ( 70.77) 0.01% 0.50 Bernar SAS (Bernar) 0.00% - 0.00% - 0.00% - 0.00% - SCI Du Champ De Pivoines (SCI Du) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Force Technology Company Limited (AFTCL) 0.00% - (0.16%) 0.70 -0.27% 0 .70 0.00% - Aequs Toys Hongkong Private Limited (ATHPL) (0.01%) (0.58) 0.08% (0.33) -0.01% 0 .02 (0.00%) (0.35) Minority interests Aequs Oil and Gas LLC (AOGLLC) (0.07%) (5.99) 0.00% 0.00% - 0.00% - Aequs Force Consumer Products Pvt. Ltd. (AFCPPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Force Technology Private limited (India) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Force Technology Company limited (AFTCL) 0.00% - 0.00% - 0.00% - 0.00% - Joint ventures (Investment accounted as per the equity method) Indian 0.00% SQuAD Forging India Private Limited (SQuAD) 6.75% 543.33 (10.68%) 46.18 0.00% - 0.57% 46.18 Aerospace Processing India Private Limited (API) 3.35% 269.74 (7.12%) 30.78 0.00% - 0.45% 36.52 Aequs Cookware Private Limited (ACPL) 0.00% - 9.97% (43.13) 2.19% ( 5.74) (0.54%) (43.13) Aequs Foundation - - - Add/ (Less): Effect of intercompany and consolidation adjustments/eliminations (8,747.84) 501.50 4 31.32 70.18 Consolidated 100.00% 8,044.88 100.00% (432.46) 100% (262.69) 100.00% (169.77) 510Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 41 - Additional information pursuant to paragraph 12.3 of Division II of Schedule III to the Companies Act, 2013- ‘General Instructions for the preparation of consolidated financial statements’ of Division II of Schedule III As at For the period ended For the period ended For the period ended September 30, 2024 September 30, 2024 September 30, 2024 September 30, 2024 Net Assets Net Assets Share in TCI Share in TCI Share in OCI / Share in OCI / Share in profit / Share in profit / As % Amount /(TCL) (TCL) (OCL) (OCL) (loss) (loss) As % Amount As % Amount As % Amount Parent Company Aequs Limited (formerly known as Aequs Private Limited) 133.10% 9,850.09 (5.86%) 46.04 0.00% - (6.42%) 46.04 Indian subsidiaries AeroStructures Manufacturing India Private Limited (ASMIPL) 30.78% 2,278.06 (19.00%) 149.43 0.00% - (20.84%) 149.43 Aerospace Manufacturing Holdings Private Limited(AMHPL) (0.02%) (1.76) 0.06% (0.48) 0.00% - 0.07% (0.48) Aequs Force Consumer Products Pvt. Ltd. (AFCPPL) 5.49% 406.07 12.07% (94.87) 0.00% - 13.23% (94.87) Aequs Force Technology Private limited (India) (AFTPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Engineered Plastics Private Limited (AEPPL) 2.29% 169.17 16.35% (128.55) 0.00% - 17.93% (128.55) Aequs Consumer Products Private Limited (ACPPL) 39.33% 2,910.99 15.02% (118.10) 0.00% - 16.47% (118.10) Aequs Home Appliances Private Limited (AHAPL) 0.58% 42.98 0.00% - 0.00% - 0.00% - Aequs Toys Private Limited (ATPL) 9.83% 727.42 15.36% (120.76) 0.00% - 16.84% (120.76) Koppal Toys Moulding COE Private Limited (KTMCPL) 4.17% 308.85 8.85% (69.60) 0.00% - 9.71% (69.60) Koppal Toys Tooling COE Private Limited (KTTCPL) 0.00% - 0.00% - 0.00% - 0.00% - Aerostructures Assemblies India Private Limited (AAI) 3.49% 258.39 (3.75%) 29.46 0.00% - (4.11%) 29.46 Aequs Material Management Private Limited (AMMPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Rajas Extrusion Private Limited (AREPL) (0.07%) (5.22) 0.11% (0.84) 0.00% - 0.12% (0.84) - Foreign subsidiaries Aequs Aerospace France SAS, France (AAF Corp) (1.43%) (105.93) 2.94% (23.11) 21.95% (15.23) 1.10% (7.88) Aequs Aerospace BV (AABV) (1.52%) (112.84) 8.15% (64.11) 85.50% (59.33) 0.67% (4.78) Aequs Aerospace LLC (AALLC) 12.06% 892.24 0.07% (0.54) (0.24%) 0.17 0.10% (0.71) Aequs Aerospace Besancon, France 0.00% - 0.00% - 0.00% - 0.00% - Aequs Holdings France, SAS (AHF) (20.78%) (1,538.03) 11.40% (89.64) 85.04% (59.01) 4.27% (30.63) Aequs Aero Machine Inc. (AAM) 5.31% 392.89 (4.84%) 38.05 (11.01%) 7.64 (4.24%) 30.41 Aequs Oil and Gas LLC (AOGLLC) (1.53%) (113.56) 0.58% (4.54) 6.27% (4.35) 0.03% (0.19) Aequs Aerospace Aubigny, France 0.00% - 0.00% - 0.00% - 0.00% - Aequs Aerospace Cholet, France 0.00% - 0.00% - 0.00% - 0.00% - Bernar SAS (Bernar) 0.00% - (9.55%) 75.07 (108.19%) 75.07 0.00% - SCI Du Champ De Pivoines (SCI Du) 0.00% - (0.76%) 6.00 (8.65%) 6.00 0.00% - Aequs Force Technology Company Limited (AFTCL) 0.02% 1.81 0.05% (0.36) (0.01%) 0.01 0.05% (0.37) Aequs Toys Hongkong Private Limited (ATHPL) 0.01% 0.70 0.04% (0.34) 0.01% (0.01) 0.05% (0.33) - Minority interests Aequs Oil and Gas LLC (AOGLLC) (0.08%) (5.68) 0.00% - 0.00% - 0.00% - Aequs Force Consumer Products Pvt. Ltd. (AFCPPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Force Technology Private limited (India) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Force Technology Company limited (AFTCL) 0.00% - 0.00% - 0.00% - 0.00% - Joint ventures (Investment accounted as per the equity method) Indian SQuAD Forging India Private Limited (SQuAD) 6.33% 468.43 (3.11%) 24.46 0.00% - (3.41%) 24.46 Aerospace Processing India Private Limited (API) 2.79% 206.73 (3.65%) 28.70 0.00% - (4.00%) 28.70 Aequs Cookware Private Limited (ACPL) 0.56% 41.50 0.00% - 0.00% - 0.00% - Associates (Investments as per the equity method) Aequs Foundation - 0.00% - 0.00% - 0.00% - Add/ (Less): Effect of intercompany and consolidation adjustments/eliminations (8,961.25) (462.33) (14.92) (447.41) Consolidated 100.00% 7,401.07 100.00% (780.96) 100.00% (63.96) 100.00% (717.00) 511Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 41 - Additional information pursuant to paragraph 12.3 of Division II of Schedule III to the Companies Act, 2013- ‘General Instructions for the preparation of consolidated financial statements’ of Division II of Schedule III As at For the year ended For the year ended For the year ended March 31, 2025 March 31, 2025 March 31, 2025 March 31, 2025 Net Assets Net Assets Share in TCI Share in TCI Share in OCI / Share in OCI / Share in profit / Share in profit / As % Amount /(TCL) (TCL) (OCL) (OCL) (loss) (loss) As % Amount As % Amount As % Amount Parent Company Aequs Limited (formerly known as Aequs Private Limited) 139.47% 9 ,928.75 (8.55%) 97.61 (4.22%) 5 .02 (9.05%) 9 2.59 Indian Subsidiaries AeroStructures Manufacturing India Private Limited (ASMIPL) 34.58% 2,461.58 (28.99%) 331.05 2.80% (3.34) (32.69%) 3 34.39 Aerospace Manufacturing Holdings Private Limited (AMHPL) [#] (0.03%) (1.86) (0.20%) 2.27 0.00% - (0.22%) 2 .27 Aequs Force Consumer Products Private Limited (AFCPPL) 3.72% 264.80 18.66% (213.08) (0.56%) 0 .67 20.90% ( 213.75) Aequs Force Technology Private Limited (AFTPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Engineered Plastics Private Limited (AEPPL) 0.15% 10.69 24.88% (284.07) (0.99%) 1 .18 27.89% ( 285.25) Aequs Consumer Products Private Limited (ACPPL) 42.44% 3,021.34 11.02% (125.79) 0.36% (0.43) 12.26% ( 125.36) Aequs Home Appliances Private Limited (AHAPL) 0.00% - 3.83% (43.78) 0.00% - 4.28% ( 43.78) Aequs Toys Private Limited (ATPL) 8.01% 569.91 27.03% (308.61) (0.61%) 0.73 30.24% ( 309.34) Koppal Toys Molding COE Private Limited (KTMCPL) 4.03% 287.08 8.04% (91.78) (0.34%) 0 .41 8.97% ( 91.78) Koppal Toys Tooling COE Private Limited (KTTCPL) 0.00% - 0.00% - 0.00% - 0.00% - Aerostructures Assemblies India Private Limited (AAI) 4.01% 285.45 (4.63%) 52.90 (0.24%) 0 .29 (5.14%) 5 2.61 Aequs Material Management Private Limited (AMMPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Rajas Extrusion Private Limited (AREPL) (0.09%) (6.11) 0.15% (1.73) 0.00% - 0.17% ( 1.73) Foreign Subsidiaries Aequs Aerospace France SAS (AAF Corp) (1.08%) (76.85) (1.17%) 13.38 15.40% ( 18.34) (3.10%) 3 1.72 Aequs Aerospace BV (AABV) [* #] (25.77%) (1,834.40) 155.70% (1,777.90) 68.36% ( 81.41) 165.86% ( 1,696.49) Aequs Aerospace LLC (AALLC) 12.64% 899.65 1.42% (16.16) 3.63% (4.32) 1.16% ( 11.84) Aequs Holdings France SAS (AHF) [#] (0.09%) (6.20) (126.05%) 1,439.43 12.52% ( 14.91) (142.19%) 1 ,454.34 Aequs Aero Machine Inc. (AAM) [#] 4.96% 353.02 0.88% (10.10) (5.63%) 6 .71 1.64% ( 16.81) Aequs Oil and Gas LLC (AOGLLC) [* #] (1.62%) (115.33) 2.35% (26.82) 23.19% (27.62) (0.08%) 0 .80 Bernar SAS (Bernar) [#] 0.00% - 0.00% - 0.00% - 0.00% - SCI Du Champ De Pivoines (SCI Du) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Force Technology Company Limited (AFTCL) 0.00% - (0.06%) 0.70 (0.59%) 0 .70 0.00% - Aequs Toys Hong kong Private Limited (ATHPL) [*] (0.00%) (0.25) 0.00% - 0.00% - 0.00% - - Minority Interests Aequs Oil and Gas LLC (AOGLLC) (0.08%) ( 5.77) 0.12% (1.34) 1.16% (1.38) (0.00%) 0 .04 Aequs Force Consumer Products Private Limited (AFCPPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Force Technology Company Limited (AFTCL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Force Technology Private limited (AFTPL) 0.00% - 0.00% - 0.00% - 0.00% - - Joint Ventures (Investment as per the equity method) Indian SQuAD Forging India Private Limited (SQuAD) 6.98% 4 97.15 (4.56%) 52.12 (0.14%) 0 .17 (5.08%) 5 1.95 Aerospace Processing India Private Limited (API) 3.36% 2 38.96 (5.31%) 60.65 0.07% ( 0.08) (5.94%) 6 0.73 Aequs Cookware Private Limited (ACPL) 0.45% 3 2.01 2.41% (27.53) 0.09% ( 0.11) 2.68% ( 27.42) Aerostructures Assemblies India Private Limited (AAI) NA NA NA NA NA NA NA NA Aequs Rajas Extrusion Private Limited (AREPL) NA NA NA NA NA NA NA NA Aequs Force Consumer Products Private Limited (AFCPPL) NA NA NA NA NA NA NA NA (till March 30, 2022) Associates (Investments as per the equity method) Aequs Foundation 0.00% - 0.00% - 0.00% - 0.00% - Add/ (Less): Effect of intercompany and consolidation adjustments/eliminations (8,881.49) (198.11) 82.83 (281.35) - - Consolidated 100.00% 7,159.78 100.00% (1,076.69) 100.00% (53.23) 100.00% (1,023.46) 512Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 41 - Additional information pursuant to paragraph 12.3 of Division II of Schedule III to the Companies Act, 2013- ‘General Instructions for the preparation of consolidated financial statements’ of Division II of Schedule III (continued) As at For the year ended For the year ended For the year ended March 31, 2024 March 31, 2024 March 31, 2024 March 31, 2024 Net Assets Net Assets Share in TCI Share in TCI Share in OCI / Share in OCI / Share in profit / Share in profit / As % Amount /(TCL) (TCL) (OCL) (OCL) (loss) (loss) As % Amount As % Amount As % Amount Parent Company Aequs Limited (formerly known as Aequs Private Limited) 120.08% 9,793.18 714.78% (1,303.90) 4.72% (1.87) 911.11% (1,302.03) Indian Subsidiaries AeroStructures Manufacturing India Private Limited (ASMIPL) 25.77% 2,101.73 285.76% 521.29 1.60% (0.63) (365.22%) 521.92 Aerospace Manufacturing Holdings Private Limited (AMHPL) [#] (0.02%) (1.27) 18.01% (32.85) 0.00% - 22.99% (32.85) Aequs Force Consumer Products Private Limited (AFCPPL) 5.10% 416.00 138.33% (252.34) (0.32%) 0.13 176.66% (252.47) Aequs Force Technology Private Limited (AFTPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Engineered Plastics Private Limited (AEPPL) 3.63% 296.09 52.77% (96.26) (1.44%) 0.57 67.76% (96.83) Aequs Consumer Products Private Limited (ACPPL) 23.01% 1,876.90 142.97% (260.80) 1.27% (0.50) 182.15% (260.30) Aequs Home Appliances Private Limited (AHAPL) 0.49% 40.03 2.12% (3.87) 0.00% - 2.71% (3.87) Aequs Toys Private Limited (ATPL) 9.17% 748.13 216.82% (395.53) (2.32%) 0.92 277.41% (396.45) Koppal Toys Molding COE Private Limited (KTMCPL) 4.03% 328.74 81.84% (149.28) 0.30% (0.12) 104.38% (149.16) Koppal Toys Tooling COE Private Limited (KTTCPL) 0.43% 34.89 1.13% (2.06) 0.00% - 1.44% (2.06) Aerostructures Assemblies India Private Limited (AAI) 2.81% 229.28 (61.76%) 112.67 (0.40%) 0.16 (78.73%) 112.51 Aequs Material Management Private Limited (AMMPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Rajas Extrusion Private Limited (AREPL) (0.05%) (4.38) 1.00% (1.83) 0.00% - 1.28% (1.83) Foreign Subsidiaries Aequs Aerospace France SAS (AAF Corp) (1.16%) (94.25) (32.59%) 59.45 (45.06%) 17.81 (29.14%) 41.64 Aequs Aerospace BV (AABV) [* #] (1.28%) (104.13) 66.14% (120.66) 25.45% (10.06) 77.40% (110.60) Aequs Aerospace LLC (AALLC) 10.91% 889.37 (0.61%) 1.11 7.81% (3.08) (2.94%) 4.19 Aequs Holdings France SAS (AHF) [#] (17.77%) (1,449.21) 40.29% (73.50) 27.95% (11.05) 43.70% (62.45) Aequs Aero Machine Inc. (AAM) [#] 4.42% 360.48 (18.59%) 33.92 (2.32%) 0.92 (23.09%) 33.00 Aequs Oil and Gas LLC (AOGLLC) [* #] (1.39%) (113.30) 8.87% (16.18) 41.13% (16.25) (0.05%) 0.07 Bernar SAS (Bernar) [#] 0.00% - (29.72%) 54.22 (137.20%) 54.22 0.00% - SCI Du Champ De Pivoines (SCI Du) 0.00% - 2.73% (4.97) 12.58% (4.97) 0.00% - Aequs Force Technology Company Limited (AFTCL) 0.01% 0.59 0.11% (0.20) (0.59%) 0.23 0.30% (0.43) Aequs Toys Hong kong Private Limited (ATHPL) [*] 0.01% 0.70 0.21% (0.38) 0.15% (0.06) 0.23% (0.32) Minority Interests Aequs Oil and Gas LLC (AOGLLC) 0.01% 1.11 0.44% (0.81) 2.06% (0.81) 0.00% - Aequs Force Consumer Products Private Limited (AFCPPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Force Technology Company Limited (AFTCL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Force Technology Private limited (AFTPL) 0.00% - 0.00% - 0.00% - 0.00% - Joint Ventures (Investment as per the equity method) Indian SQuAD Forging India Private Limited (SQuAD) 5.44% 443.58 (10.25%) 18.69 1.32% (0.52) (13.45%) 19.21 Aerospace Processing India Private Limited (API) 2.18% 178.03 (18.89%) 34.45 (0.20%) 0.08 (24.05%) 34.37 Aequs Cookware Private Limited (ACPL) NA NA NA NA NA NA NA NA Aerostructures Assemblies India Private Limited (AAI) NA NA NA NA NA NA NA NA Aequs Rajas Extrusion Private Limited (AREPL) NA NA NA NA NA NA NA NA Aequs Force Consumer Products Private Limited (AFCPPL) NA NA NA NA NA NA NA NA (till March 30, 2022) Associates (Investments as per the equity method) Aequs Foundation 0.00% - 0.00% - 0.00% - 0.00% - Add/ (Less): Effect of intercompany and consolidation adjustments/eliminations (7,816.03) 1,698.16 (64.14) 1,762.30 Consolidated 100.00% 8,156.20 100.00% (181.46) 100.00% (39.02) 100.00% (142.44) 513Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 41 - Additional information pursuant to paragraph 12.3 of Division II of Schedule III to the Companies Act, 2013- ‘General Instructions for the preparation of consolidated financial statements’ of Division II of Schedule III (continued) As at For the year ended For the year ended For the year ended March 31, 2023 March 31, 2023 March 31, 2023 March 31, 2023 Net Assets Net Assets Share in TCI Share in TCI Share in OCI / Share in OCI / Share in profit / Share in profit / As % Amount /(TCL) (TCL) (OCL) (OCL) (loss) (loss) As % Amount As % Amount As % Amount Parent Company Aequs Limited (formerly known as Aequs Private Limited) 183.87% 4,913.96 37.78% (435.00) (1.77%) 1.00 39.81% (436.00) Indian Subsidiaries AeroStructures Manufacturing India Private Limited (ASMIPL) 58.07% 1,552.00 13.52% (155.72) (8.48%) 4.78 14.66% (160.50) Aerospace Manufacturing Holdings Private Limited (AMHPL) [#] (2.61%) (69.64) 0.51% (5.82) 0.00% - 0.53% (5.82) Aequs Force Consumer Products Private Limited (AFCPPL) 13.38% 357.54 25.95% (298.77) (0.53%) 0.30 27.31% (299.07) Aequs Force Technology Private Limited (AFTPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Engineered Plastics Private Limited (AEPPL) 10.76% 287.59 17.11% (197.00) 1.77% (1.00) 18.08% (198.00) Aequs Consumer Products Private Limited (ACPPL) 9.74% 260.24 15.45% (177.97) 1.49% (0.84) 16.17% (177.13) Aequs Home Appliances Private Limited (AHAPL) 1.37% 36.59 0.96% (11.02) 0.00% - 1.01% (11.02) Aequs Toys private limited (ATPL) 20.79% 555.65 9.93% (114.35) 0.00% - 10.44% (114.35) Koppal Toys Molding COE Private Limited (KTMCPL) 8.13% 217.17 5.12% (58.96) 0.00% - 5.38% (58.96) Koppal Toys Tooling COE Private Limited (KTTCPL) 1.39% 37.20 0.34% (3.86) 0.00% - 0.35% (3.86) Aerostructures Assemblies India Private Limited (AAI) 4.24% 113.32 (0.19%) 2.21 (0.59%) 0.33 (0.17%) 1.88 Aequs Material Management Private Limited (AMMPL) (0.03%) (0.90) 0.05% (0.60) 0.00% - 0.05% (0.60) Foreign Subsidiaries Aequs Aerospace France SAS (AAF Corp) (15.01%) (401.10) 11.53% (132.83) 71.70% (40.41) 8.44% (92.41) Aequs Aerospace BV (AABV) [* #] 0.24% 6.50 13.47% (155.11) 129.06% (72.74) 7.52% (82.37) Aequs Aerospace LLC (AALLC) 32.63% 872.14 1.24% (14.32) 30.25% (17.05) (0.25%) 2.73 Aequs Holdings France SAS (AHF) [#] (51.47%) (1,375.71) 11.98% (137.96) 144.36% (81.36) 5.17% (56.60) Aequs Aero Machine Inc. (AAM) [#] 11.98% 320.22 (2.02%) 23.23 13.98% (7.88) (2.84%) 31.11 Aequs Oil and Gas LLC (AOGLLC) [* #] (3.82%) (102.04) 7.81% (89.94) 163.64% (92.23) 0.57% (6.19) Bernar SAS (Bernar) [#] (16.32%) (436.04) 4.32% (49.74) 57.27% (32.28) 1.59% (17.46) SCI Du Champ De Pivoines (SCI Du) 1.83% 48.94 (0.73%) 8.45 (5.16%) 2.91 (0.51%) 5.54 Aequs Force Technology Company Limited (AFTCL) 0.12% 3.26 (1.79%) 20.61 (0.04%) 0.02 (1.88%) 20.59 Aequs Toys Hong kong Private Limited (ATHPL) [*] 0.04% 1.13 (0.23%) 2.70 (1.42%) 0.80 (0.17%) 1.90 Minority Interests Aequs Oil and Gas LLC (AOGLLC) (0.36%) (9.53) (0.01%) 0.10 (7.79%) 4.39 (0.37%) 4.10 Aequs Force Consumer Products Private Limited (AFCPPL) (3.90%) (104.15) 0.00% - 0.00% - 0.00% - Aequs Force Technology Private limited (AFTPL) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Force Technology Company Limited (AFTCL) 0.02% 0.60 0.00% - 0.00% - 0.00% - Joint Ventures (Investment as per the equity method) Indian SQuAD Forging India Private Limited (SQuAD) 16.31% 436.00 1.80% (20.76) 0.00% - 1.90% (20.76) Aerospace Processing India Private Limited (API) 5.20% 139.00 (1.11%) 12.79 0.00% - (1.17%) 12.79 Aerostructures Assemblies India Private Limited (AAI) 0.00% - 0.00% - 0.00% - 0.00% - Aequs Rajas Extrusion Private Limited (AREPL) 0.00% - (0.06%) 0.72 0.00% - 0.01% (0.07) Associates (Investments as per the equity method) Aequs Foundation 0.00% - 0.00% - 0.00% - 0.00% - Add/ (Less): Effect of intercompany and consolidation adjustments/eliminations (4,987.36) 838.09 274.90 565.35 Consolidated 100.00% 2,672.52 100.00% (1,151.31) 100.00% (56.36) 100.00% (1,094.95)

Note:

CertainsubsidiarieswhicharematerialasperICDRguidelineswereunauditedasofthedateofissuanceoftheGroup'sfinancialstatementsfortheyearsendedMarch31,2024[*]andMarch31,2023[#]respectivelyandwerecalledassuchintheauditors reportontheconsolidatedfinancialstatements.Subsequently,theManagementhasobtainedauditreportsfortheseentitiesfromanindependentauditorandsuchindependentauditorhasissuedanExaminationReportontheRestatedFinancialStatementfor each of these entities prior to approval of these Restated Financial Statements by the board of directors of the Company.

514Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 42 - Discontinued operations Refer accounting policy in Note 2aa

(a) Description TheGroupannounceditsintentiontoliquidateitsstep-downsubsidiariesAequsToysHongkongPrivateLimited(ATHPL)andAequsForceTechnologyCompanyLimited(AFTCL).Theassociatedlossonbusinessarethereforeshownseparatelyasdiscontinuingoperationsinrestatedstatementofprofit andlossandrestatedassetsandliabilitiesarepresentedasheldforsaleinrestatedconsolidatedfinancialstatementsfortheperiodsendedSeptember30,2025andSeptember30,2024andfortheyearsendedMarch31,2025andMarch31,2024.AequsForceTechnologyCompanyLimited(AFTCL), Hongkong got deregistered w.e.f December 27, 2024 and hence has been taken out from the discontinuing operations list.

OnMarch31,2021,theGroupannounceditsintentiontoliquidateitssubsidiaryAequsOilandGasLLC(AOGLLC).Theassociatedlossonbusinessarethereforeshownseparatelyasdiscontinuingoperationsinrestatedstatementofprofitandlossandrestatedassetsandliabilitiesarepresentedasheld for sale in restated consolidated financial statements for the periods ended September 30, 2025 and September 30, 2024 and the years ended March 31, 2025, March 31, 2024 and March 31, 2023.

InMarch2023,theGroupannounceditsintentionnottocommenceoperationsinitssubsidiaryKoppalToysToolingCOEPrivateLimited(KTTCPL).Theassociatedlossonbusinessarethereforeshownseparatelyasdiscontinuingoperationsinstatementofprofitandlossand assetsandliabilitiesare presented as held for sale in financial statements for the year ended March 31, 2023. Koppal Toys Tooling COE Private Limited (KTTCPL) got deregistered w.e.f November 30, 2024 and hence has been taken out from the discontinuing operations list.

In July 2022, the Group announced its intention to close its subsidiary Aequs Force Technology Private limited (AFTPL) which is yet to commence operations. The associated loss from this entity is therefore shown separately as discontinuing operations in statement of profit and loss and assets and liabilities are presented as held for sale in financial statements for the year ended March 31, 2023.

Aequs Home Appliances Private Limited (AHAPL) has filed application for strike-off on April 23, 2025. The Company got struck off w.e.f. June 27, 2025

(b) Financial performance and cash flow information

The financial performance and cash flow information of discontinuing operations presented as follows:

For the period ended September 30, 2025 For the period ended September 30, 2024 For the year ended March 31, 2025 For the year ended March 31, 2024 For the year ended March 31, 2023 AOGLLC ATHPL AFTCL Total AOGLLC ATHPL AFTCL Total AOGLLC ATHPL AFTCL AHAPL Total AOGLLC ATHPL AFTCL Total AOGLLCKTTCPL AFTPL Total Revenue - - - - - - - - - - - - 18.61 - 18.61 - - - Other income 0.50 (3.08) (2.58) - - - - 0.73 - - 0.73 - 0.25 - 0.25 - 0.23 0.23 Expenses - (0.35) (0.35) (0.19) (0.33) (0.37) (0.89) - - - - (0.07) (39.76) - (39.83) (2.10) (5.82) (7.92) Profit/(Loss) before Income tax during the period /

0.50 (3.43) NA (2.93) (0.19) (0.33) (0.37) (0.89) 0.73 - NA - 0.73 (0.07) (20.90) - (20.97) (2.10) (5.59) NA (7.69) year Income tax expense - - - - - - - - - - - - - - - - - - Profit/(Loss) after Income tax during the period /

0.50 (3.43) (2.93) (0.19) (0.33) (0.37) (0.89) 0.73 - - 0.73 (0.07) (20.90) - (20.97) (2.10) (5.59) (7.69) year Cash flows Net Cash Inflow/(Outflow) from Operating Activities 0.50 (3.43) (2.93) (0.19) (0.33) (0.37) (0.89) 0.73 - - 0.73 0.01 0.08 0.97 1.06 (1.53) (1.59) (3.12) Net Cash Inflow/(Outflow) from Investing Activities - - - - - - - - - - - - - - - - (27.56) (27.56) Net Cash Inflow/(Outflow) from Financing Activities - - NA - - - - - - NA - - (0.04) - - (0.04) 0.00 9.17 NA 9.17 Net increase/(decrease) in cash generated from

0.50 (3.43) (2.93) (0.19) (0.33) (0.37) (0.89) 0.73 - - 0.73 (0.03) 0.08 0.97 1.02 (1.53) (19.98) (21.51) discontinued operation

(c) Assets and liabilities of disposal group classified as held for sale As at September 30, 2025 As at September 30, 2024 As at March 31, 2025 As at March 31, 2024 As at March 31, 2023 AOGLLC ATHPL AFTCL AHAPL Total AOGLLC ATHPL AFTCL AOGLLC ATHPL AFTCL Total AOGLLC ATHPL AFTCL Total Total AOGLLCKTTCPL AFTPL Total Assets classified as held for sale Capital work-in-progress - - NA - - - - - - - - - - - - - - 29.24 29.24 Trade receivables - - - - - - - - - - - - - - - - - - Inventories - - - - - - - - - - - - - - - - - - Other current assets 0.08 0.11 0.19 1.05 1.03 1.80 3.88 0.09 0.05 - 0.14 1.01 1.02 1.67 3.70 1.07 19.76 20.83 Total assets of disposal group held for sale 0.08 0.11 0.19 1.05 1.03 1.80 3.88 0.09 0.05 - 0.14 1.01 1.02 1.67 3.70 1.07 49.00 50.07 Liabilities directly associated with Assets classified as NA NA -

held for sale:

Borrowings - - - - - - - - - - - - - - - - (9.30) (9.30) Trade Payables - - - - (0.32) - (0.32) - (0.29) - (0.29) - (0.32) - (0.32) - (1.54) (1.54) Other current liabilities - - - (0.17) - - (0.17) - - - - (0.16) - - (0.16) 0.16 (0.05) 0.11 Total liabilities of disposal group held for sale - - - (0.17) (0.32) - (0.49) - (0.29) - (0.29) (0.16) (0.32) - (0.48) 0.16 (10.89) (10.73) Net Assets 0.08 0.11 0.19 0.88 0.71 1.80 3.39 0.09 (0.24) (0.15) 0.85 0.70 1.67 3.22 1.23 38.11 39.34 515Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 43 - Additional regulatory information required by Schedule III

(i)Detailsofbenamipropertyheld:NoproceedingshavebeeninitiatedonorarependingagainsttheGroupforholdingbenamipropertyundertheBenamiTransactions(Prohibition)Act,1988 (45 of 1988) and Rules made thereunder.

(ii) Wilful defaulter: The Group has not been declared wilful defaulter by any bank or financial institution or government or any government authority.

(iii)Relationshipwithstruckoffcompanies:TheGrouphasenteredintobelowtransactionswithstruckoffcompaniesundersection248oftheCompaniesAct,2013orsection560ofthe Companies Act, 1956 during the period ended September 30, 2025:

Name of the struck off company Nature of As at As at As at As at Relationship with the struck off transaction with September 30, September 30, March 31, 2025 March 31, 2024 company, if any, to be disclosed.

struck off company 2025 2024 Matrix Plus Private Limited Trade Payable - 1.50 NA 3.75 Third party Shakun And Company (Services) Pvt Ltd Trade Payable 0.05 - - - Third party

(iv) Compliance with number of layers of companies: The Group has complied with the number of layers prescribed under the Companies Act, 2013.

(v) Compliance with approved scheme(s) of arrangements: The Group has not entered into any scheme of arrangement which has an accounting impact on current or previous financial year.

(vi)(a)DuringtheperiodsendedSeptember30,2025,September30,2024andyearsendedMarch31,2025andMarch31,2024.TheGrouphasnotadvancedorloanedorinvestedthefundsto any other person(s) or entity(ies), including foreign entities (Intermediaries) with the understanding that the Intermediary shall:

(i) directly or indirectly lend or invest in other persons or entities identified in any manner whatsoever by or on behalf of the Funding Party (Ultimate Beneficiaries) or

(ii) provide any guarantee or security or the like on behalf of the Ultimate Beneficiaries.

DuringtheyearendedMarch31,2023,theparentcompanyhasadvancedorloanedorinvestedthefundstootherentities(intermediaries)forthepurposes/asagreedwithintermediarystated

below:

Nature of amountIntermediary to whom amount was given Amount Ultimate beneficiary Purpose to Loan Aequs Aerospace BV 129.36 To repay the loan to banks and other related parties Investment Aequs Toys Private Limited 195.00 Koppal Toys Molding COE Private Limited To make the investment in other related party Investment Aequs Consumer Products Private Limited 40.00 Aequs Home Appliance Private Limited To make the investment in other related party

(vi)(b) DuringtheperiodsendedSeptember30,2025,September30,2024andyearsendedMarch31,2025andMarch31,2024.TheGrouphasnotreceivedanyfundsfromanyperson(s)or entity(ies), including foreign entities (Funding Party) with the understanding (whether recorded in writing or otherwise) of the company shall:

(i) directly or indirectly lend or invest in other persons or entities identified in any manner whatsoever by or on behalf of the Funding Party (Ultimate Beneficiaries) or

(ii) provide any guarantee or security or the like on behalf of the Ultimate Beneficiaries.

During the year ended March 31, 2023, the parent company has received the following funds from other entities (Funding parties) with the understanding (whether recorded in writing or otherwise) that the company shall lend to invest in other entities (ultimate beneficiaries) for the purposes the stated below:

Nature of amount Funding party Amount Ultimate beneficiary Purpose of further investment or lending Investment Aequs Manufacturing Investments Private 7 1.78 SQuAD Forging India Private Limited Business operations Investment Limited 210.00 Aequs Engineered Plastics Private Limited Business operations Investment 118.00 Aequs Force Consumer Products Private Limited Business operations Investment 244.00 Aequs Consumer Products Private Limited Business operations and further investing Investment 430.00 Aequs Toys Private Limited Business operations and further investing Investment Amicus Capital Partners India Fund I / 300.00 Aequs Engineered Plastics Private Limited Business operations Amicus Capital Private Equity I LLP Investment Amicus Capital Private Equity I LLP 330.00 Aequs Force Consumer Products Private Limited Business operations Loan Aequs Manufacturing Investments Private 65.00 Aequs Engineered Plastics Private Limited Business operations Loan Limited 125.00 Aequs Force Consumer Products Private Limited Business operations Loan 24.00 Aequs Consumer Products Private Limited Business operations Loan 129.36 Aequs Aerospace BV To repay the loan to banks and other

(vii) There is no income surrendered or disclosed as income in the tax assessments under the Income Tax Act, 1961, that has not been recorded in the books of account.

(viii) The Group has not traded or invested in crypto currency or virtual currency.

(ix) The Group has not revalued its Property, plant and equipment or intangible assets.

(x) The Group does not own any immovable properties in India.

(xi)TherearenochargesorsatisfactionwhichareyettoberegisteredwiththeRegistrarofCompaniesbeyondthestatutoryperiod.However,theGroupisyettomodifythechargecreatedinone of its subsidiary AeroStructures Manufacturing, for INR 100.00 million, which is in excess against the sanctioned limit of INR 1,425.80 million.

(xii) The borrowings obtained by the Group from bank have been applied for the purposes for which such loans were taken.

(xiii)TheGroupwasnotrequiredtorecogniseanyprovisionasatSeptember30,2025undertheapplicablelaworaccountingstandards,asitdoesnothaveanymaterialforeseeablelosseson long-term contracts. The Group did not have any derivative contracts as at September 30, 2025.

(xiv)TheGrouphadoneCoreInvestmentGroup(CIC)aspartoftheGroup,viz.,AerospaceManufacturingHoldingsPrivateLimited,Indiawhichisnotrequiredtoberegisteredwiththe Reserve Bank of India. This Company ceased to be a CIC during the period ended September 30, 2024.

(xv)TheGrouphasborrowingsfrombanksandfinancialinstitutionsonthebasisofsecurityofcurrentassets.Refernote15forDetailsofquaterlystatementsofcurrentassetsfiledbythe company with the bank and reconciliation with the books of accounts.

516Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 44 - Other notes Duringthe periodended September30,2025,the Grouphas revisedthe presentationof certainnotes tothe RestatedConsolidated Financialinformationforbetter presentation.Hence, comparative amounts for the year ended March 31, 2023 have been reclassified for consistency.

Classification as per financial Classification as per restated financial Nature As reported earlier Revised Change due to statements for the year ended March information classification classification 31, 2023 Total income Other gains/(losses) – net Other income - Exchange difference(other than 95.92 - (95.92) borrowings) - Net gain on disposal of property, plant and equipment Finance income* Other income - Interest income 41.98 - (41.98) - Unwinding of discount on security deposit - Financial guarantee income Other income* - Other gains/(losses) – Net - Exchange difference(other than 146.17 284.07 137.90 - Finance Income borrowings) - Net gain on disposal of property, plant and equipment - Interest income - Unwinding of discount on security deposit - Financial guarantee income *TheGroup,disclosesEBITDAinitsStatementofProfitandLoss.TillthepreviousyearendedMarch31,2023,financeincomewaspresentedinitsConsolidatedstatementofprofitandlossas an item after EBITDA. As a result, Total income amounting to ₹8,363.41 was reported without including the finance income for the year ended March 31, 2023.

DuringtheyearendedMarch31,2024,theGroupconcludedthatScheduleIIItotheCompaniesAct,2013requirescompaniestoincludeallitemsofincomewithinTotalIncome.Consequently, theGrouphascorrecteditspresentationbyrestatingitscorrespondingfiguresaspresentedinthesefinancialstatementsbyreclassifyingfinanceincomewithin“Otherincome”. Asaresult,the balanceofOtherincomehasincreasedfrom₹242.09to₹284.07forMarch31,2023 withacorrespondingincreaseinTotalincomeandreportedEBITDA.Thischangeinpresentationdoesnot have any impact on Group’s reported Profit / Loss after tax for the year ended March 31, 2023 nor does it affect the balance sheet as at that date.

Note45-AspertheprovisionsofSection203oftheCompaniesAct,2013readwithRule8AoftheCompanies(AppointmentandRemunerationofManagerialPersonnel)Rules,2014, AerospaceProcessingIndiaPrivateLimited(APIPL)wasrequiredtoappointaCompanySecretaryposttheresignationofitsexistingCompanySecretary.However,APIPLwasunabletodoso withinthepermissibletimelimitspecifiedintheAct.APIPL,thereafter,appointedaCompanySecretaryonJanuary13,2022(delayof fifteendays).APIPLisintheprocessoffiling adjudicationapplicationunderSection454oftheCompaniesAct,2013.BasedontheManagement'sassessmentthepotentialimpactofpenaltyonaccountofdelayinappointmentofCompany Secretary on the financial statements is not expected to be material and APIPL has accrued INR 1 during the year ended March 31, 2023 towards potential penalty amount.

Note46-AspertheprovisionsofSection203oftheCompaniesAct,2013readwithRule8AoftheCompanies(AppointmentandRemunerationofManagerialPersonnel)Rules,2014, AerostructuresAssembliesIndiaPrivateLimited(AAI)wasrequiredtoappointaCompanySecretaryposttheresignationofitsexistingCompanySecretary.However,AAIwasunabletodoso withinthepermissibletimelimitspecifiedintheAct.AAI,thereafter,appointedaCompanySecretaryonJune17,2021(delayofonehundredandninetyeightdays).AAIhasfiledadjudication applicationonJune13,2023withTheRegistrarofCompanies,underSection454oftheCompaniesAct,2013.BasedontheManagement'sassessmentthepotentialimpactofpenaltyonaccount ofdelayinappointmentofCompanySecretaryonthefinancialstatementsisnotexpectedtobematerialandAAIhasaccruedINR1duringtheyeartowardspotentialpenaltyamount.

Subsequently, the Company has paid the penalty amount of INR 0.47 in February 2024 based on the adjudication order.

Note47-AerostructuresManufacturingIndiaPrivateLimited(ASMIPL)hadguaranteedaloanavailedbyAequsAerospaceBV,Netherlands(“AABV”),anassociateofASMIPLfromabankin Indiain2016.Duetolackofsufficientfundsattheassociate,repaymentofsomeinstalmentsoftheloanandcorrespondinginterest,amountingtoRs.118millionwaspaidbyASMIPLdirectlyto the bank in India over a period of five years in discussion with the bank in India. Such amounts were disclosed as recoverable from AABV until the prior year.

DuringFY23,ASMIPLhasconsideredindicatorsofimpairmentfortheamountrecoverablefromAABV,suchasoperationalperformance,outlookoffutureprofitability,amongotherpotential indicators. Based on such assessment, ASMIPL has recognised an impairment loss aggregating to Rs.118.00 million with respect to the said receivables from AABV.

Subsequenttotheyearend,ASMIPLhassoughtclarificationsfromtheAuthorisedDealerBankonimplicationsoftheabovetransactionsunderTheForeignExchangeManagementAct(FEMA) andisawaitingtheirresponse.Inviewofthemanagement,basedontheirassessment/discussionswiththeAuthorisedDealerthereisnosignificantimplicationonthefinancialstatementsarising from compliance requirements under FEMA.

Note48-InAequsEngineeredPlasticsPrivateLimited(AEPPL),tradepayablesincludeamountspayableinforeigncurrencytotheoverseasvendoramountingtoINR1.00asatMarch31,2023 whichareoutstandingformorethanthreeyearswhichisnotincompliancewithRBIMasterDirectionFEDMasterDirectionNo.17/2016-17datedJanuary1,2016onImportofGoodsand Services.Subsequenttotheyearend,AEPPLhasintimatedthedetailsofthesebalancestotheADBankandiscurrentlyintheprocessofobtainingapprovalfromtheReserveBankofIndiafor settlementofthesebalances.Managementbelievesthatpotentialpenalty,ifany,thatmayariseonaccountofthisnon-compliancewiththeabovedirectionsisnotreadilyascertainableand consequently the same has not been accounted for in these financial statements.

Note49-InAequsForceConsumerProductsPrivateLimited(AFCPPL),tradepayablesincludeamountspayableinforeigncurrencytotheoverseasvendoramountingtoINR2.00asatMarch 31,2023whichareoutstandingformorethanthreeyearswhichisnotincompliancewithRBIMasterDirectionFEDMasterDirectionNo.17/2016-17datedJanuary1,2016onImportofGoods andServices.Subsequenttotheyearend,AFCPPLhasintimatedthedetailsofthesebalancestotheADBankandiscurrentlyintheprocessofobtainingapprovalfromtheReserveBankofIndia forsettlementofthesebalances.Managementbelievesthatpotentialpenalty,ifany,thatmayariseonaccountofthisnon-compliancewiththeabovedirectionsisnotreadilyascertainableand consequently the same has not been accounted for in these financial statements.

Note50-Aspartoftheoverallgrouprestructuringplan,themanagementofKoppalToysToolingCOEPrivateLimitedhasdecidedthattheCompanywouldnotcommenceoperationsandwould ceasetobeagoingconcernasonMarch31,2023.Hence,thefinancialsfortheyearendedMarch31,2023havebeenpreparedonliquidationbasis.KoppalToysToolingCOEPrivateLimited

(KTTCPL), has been struck off with effect from November 30, 2024.

517Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Notes to Restated Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Note 51 - Subsequent events OnNovember10,2025,theCompanyhasundertakenaprivateplacementofEquityShares,aspermittedunderapplicablelaws,aggregatingto₹1,440.00million(“Pre-IPOPlacement”).ThePre- IPO Placement was made to investors at a price of ₹ 123.97 per Equity Share.

As per our report of even date attached. for B S R & Co. LLP for and on behalf of the Board of Directors of Chartered Accountants Aequs Limited (formerly known as Aequs Private Limited) ICAI Firm's Registration No. 101248W/W-100022 CIN: U80302KA2000PLC026760 Sampad Guha Thakurta Rajeev Kaul Aravind S. Melligeri Partner Managing Director Executive Chairman and Chief Executive Officer Membership No.: 060573 DIN-01468590 DIN-00787735

Place: Chennai Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 Date: November 14, 2025 Dinesh Iyer Ravi Mallikarjun Hugar Chief Financial Officer Company Secretary M. No. - A20823

Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 518Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part A - Statement of adjustments to Audited Consolidated Financial Statements I. Reconciliation between total equity as per audited consolidated financial statements and restated consolidated financial information Particulars As at As at As at As at As at September 30, 2025September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Total equity as per the audited consolidated financial statements 8,044.88 7,401.07 7,159.78 8,156.20 2,672.52 Adjustments

(i) Audit qualification - - - - -

(ii) Adjustments due to change in accounting policy/ prior period items / other adjustments - - - - -

(iii) Deferred tax impact on above adjustment - - - - - Total impact of adjustments - - - - - Total Equity as per Restated Consolidated Financial Information 8,044.88 7,401.07 7,159.78 8,156.20 2,672.52 II. Reconciliation between loss as per audited consolidated financial statements and restated consolidated financial information Six months ended September 30, Six months ended Year ended Year ended Year ended 2025September 30, 2024 March 31, 2025 March 31, 2024 March 31, 2023 Loss for the year as per Audited Consolidated Financial Statements (169.77) (717.00) (1,023.46) (142.44) (1,094.95) Adjustments

(i) Audit qualification - - - - -

(ii) Adjustments due to change in accounting policy/ prior period items / other adjustments - - - - -

(iii) Deferred tax impact on above adjustment - - - - - Total impact of adjustments - - - - - Net loss after tax as per Restated Consolidated Financial Information (169.77) (717.00) (1,023.46) (142.44) (1,094.95) Part B -Non adjusting events I. Matters included in the Emphasis of Matter paragraph in the Independent Auditor’s Report which do not require any corrective adjustment in the restated consolidated financial information:

In the Independent Auditor's Report on Special Purpose Consolidated Interim Financial Statements of Aequs Limited (formerly known as Aequs Private Limited) For the period ended September 30, 2025 WedrawattentiontoNote2.atothespecialpurposeconsolidatedinterimfinancialstatements,whichdescribesthebasisofpreparation.Thespecialpurposeconsolidatedinterimfinancialstatementsarepreparedbythe Groupanditsjointventureforthepurposeofpreparationoftherestatedconsolidatedfinancialinformation,whichwillbeincludedintheRedHerringProspectusandProspectusinconnectionwiththeproposedinitialpublic offeringofequitysharesbytheHoldingCompanycomprisingafreshissueofequitysharesoftheHoldingCompanyandanofferforsaleofequitysharesbycertainshareholdersoftheHoldingCompany.Thesespecial purposeconsolidatedinterimfinancialstatementshavebeenpresentedwithoutcomparativefinancialinformationandstatementsofprofitandlossforthecurrentinterimperiodandcomparativeinterimperiodofthe immediatelyprecedingfinancialyear.Asaresult,thespecialpurposeconsolidatedinterimfinancialstatementsmaynotbesuitableforanotherpurpose.OurreportisintendedsolelyfortheHoldingCompanyandshouldnot be used, referred to or distributed for any other purpose or to any other party.

Our opinion on the special purpose consolidated interim financial statements is not modified in respect of above matters.

For the period ended September 30, 2024 WedrawattentiontoNote2.atothespecialpurposeconsolidatedinterimfinancialstatements,whichdescribesthebasisofpreparation.Thespecialpurposeconsolidatedinterimfinancialstatementsarepreparedtoassistthe HoldingCompanyinpreparationoftherestatedconsolidatedfinancialinformation,whichwillbeincludedintheRedHerringProspectusandProspectusinconnectionwiththeproposedinitialpublicofferingofequityshares bytheHoldingCompanycomprisingafreshissueofequitysharesoftheHoldingCompanyandanofferforsaleofequitysharesbycertainshareholdersoftheHoldingCompany.Thesespecialpurposeconsolidatedinterim financialstatementshavebeenpresentedwithoutcorrespondingfigures. Asaresult,thespecialpurposeconsolidatedinterimfinancialstatementsmaynotbesuitableforanotherpurpose.Ourreportisintendedsolelyforthe Holding Company and should not be used, referred to or distributed for any other purpose or to any other party.

Our opinion on the special purpose consolidated interim financial statements is not modified in respect of this matter.

For the year ended March 31, 2024 WedrawattentiontoNote9(i)totheconsolidatedfinancialstatementsinrelationtoaguaranteeissuedbytheHoldingCompany'ssubsidiaryandcertainpaymentsmadebytheHoldingCompany'ssubsidiaryundersuch guaranteesonbehalfofaforeignsubsidiaryinrespectofwhichtheHoldingCompany'ssubsidiaryisindiscussionswiththeAuthorisedDealertoevaluatethecompliancerequirementsunderForeignExchangeManagement Act, 1999 and regulations thereunder (FEMA Regulations), if any. Pending such evaluation, no adjustments have been made to the financial statements.

Our opinion is not modified in respect of this matter.

For the year ended March 31, 2023 WedrawyourattentiontoNote51inthefinancialstatements(Note47oftherestatedconsolidatedfinancialinformation)regardingtheamountspaidbytheHoldingCompany'ssubsidiarydirectlytoabankinIndiaonbehalf ofaforeignassociateentity,aggregatingtoRs.118.00(whichhasbeenfullyimpaired)asatMarch31,2023,forwhichtheHoldingCompany'ssubsidiaryhasgivenaguaranteeinanearlieryear.Subsequenttotheyearend, the Holding Company's subsidiary has intimated these transactions to the Authorised Dealer Bank and sought guidance on implications, if any, under The Foreign Exchange Management Act, for which response is awaited.

WedrawyourattentiontoNote52(Note48oftherestatedconsolidatedfinancialinformation)inthefinancialstatementsregardingnon-settlementofforeigncurrencypayablesamountingtoRs.1millionasatMarch31, 2023whicharedueformorethanthreeyearsandRs.7.00asatMarch31,2023whichareoutstandingformorethansixmonthsbutlessthanthreeyearsfromthedateofimports.Thisisbeyondtheperiodstipulatedunder theReserveBankofIndiaMasterDirectiononImportofGoodsandServicesvideFEDMasterDirectionNo.17/2016-17datedJanuary1,2016(asamended).TheHoldingCompany'ssubsidiaryhasmadenecessary application to the Authorised dealer Bank, seeking approval from RBI for extension of time limit to settle the outstanding amount.

WedrawyourattentiontoNote53(Note49oftherestatedconsolidatedfinancialinformation)inthefinancialstatementsregardingnon-settlementofforeigncurrencypayablesamountingtoRs.2millionasatMarch31, 2023whicharedueformorethanthreeyearsandRs.41millionasatMarch31,2023whichareoutstandingformorethansixmonthsbutlessthanthreeyearsfromthedateofimports.Thisisbeyondtheperiodstipulated undertheReserveBankofIndiaMasterDirectiononImportofGoodsandServicesvideFEDMasterDirectionNo.17/2016-17datedJanuary1,2016(asamended).TheHoldingCompany'ssubsidiaryhasmadenecessary application to the Authorised dealer Bank, seeking approval from RBI for extension of time limit to settle the outstanding amount.

WedrawattentiontoNote54(Note50oftherestatedconsolidatedfinancialinformation)regardingpreparationoffinancialstatementsofoneoftheHoldingCompany'ssubsidiaryonarealisablevaluebasisforreasonsstated therein.

Our opinion is not modified in respect of above matters.

519Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) II. Matters reported with respect to Other Legal and Regulatory Requirements which do not require any adjustment in the Restated Consolidated Financial Information.

In the Independent Auditor's Report on Consolidated Financial Statements of Aequs Limited (formerly known as Aequs Private Limited) For the year ended March 31, 2025:

Para 2A(b) of the Other Legal and Regulatory Requirements section Inouropinion,properbooksofaccountasrequiredbylawrelatingtopreparationoftheaforesaidconsolidatedfinancialstatementshavebeenkeptsofarasitappearsfromourexaminationofthosebooksexceptforthe matters stated in the paragraph 2B(f) below on reporting under Rule 11(g) of the Companies (Audit and Auditors) Rules, 2014.

Para 2B(f) of the Other Legal and Regulatory Requirements section Basedonourexaminationwhichincludedtestchecks,exceptfortheinstancementionedbelow,theHoldingCompany,itssubsidiarycompaniesandjointventurecompanieswhicharecompaniesincorporatedinIndiawhose financialstatementshavebeenauditedundertheAct,haveusedaccountingsoftwaresformaintainingitsbooksofaccount,whichhaveafeatureofrecordingaudittrail(editlog)facilityandthesamehasoperatedthroughout

the year for all relevant transactions recorded in the respective softwares:

In respect of the Holding Company, its nine subsidiary companies and three joint venture companies, the feature of recording audit trail (edit log) facility was not enabled

(i) at the database level to log any direct data changes;

(ii) at the application level for certain fields / tables relating to all significant financial processes and

(iii) for certain changes at the application level which were performed by users having privileged access rights.

Further,whereaudittrail(editlog)facilitywasenabledandoperatedthroughouttheyear,wedidnotcomeacrossanyinstanceofaudittrailfeaturebeingtamperedwith.Additionally,theaudittrailwhereenabled,hasbeen preserved by the Company as per statutory requirements for record retention.

For the year ended March 31, 2024:

Para 2A(b) of the Other Legal and Regulatory Requirements section Inouropinion,properbooksofaccountasrequiredbylawrelatingtopreparationoftheaforesaidconsolidatedfinancialstatementshavebeenkeptsofarasitappearsfromourexaminationofthosebooksexceptforthe matters stated in the paragraph 2B(f) below on reporting under Rule 11(g) of the Companies (Audit and Auditors) Rules, 2014.

Para 2B(f) of the Other Legal and Regulatory Requirements section Based on our examination which included test checks and that performed by the auditors of subsidiary companies incorporated in India whose financial statements have been audited under the Act, -theHoldingCompany,4subsidiarycompaniesand2jointventurecompanies,haveusedaccountingsoftwareformaintainingitsbooksofaccount,however,thefeatureofrecordingaudittrail(editlog)facilityhasnotbeen enabled. Consequently, we are unable to comment on audit trail feature of the said software.

-5subsidiariescompanieshaveusedaccountingsoftwareformaintainingitsbooksofaccountwhichhasafeatureofrecordingaudittrail(editlog)facilityandthesamehasoperatedthroughouttheyearforallrelevant transactions recorded in the software. Further, during the course of their audit, the other auditors did not come across any instance of audit trail feature being tampered with.

- 1 subsidiary company has not maintained books of account in electronic mode. Accordingly, reporting under Rule 11 (g) of the Companies (Audit and Auditors) Rules, 2014 is not applicable.

III. Matters included in the Companies (Auditor's Report) Order which does not require any corrective adjustment in the Restated Consolidated Financial information:

In the Independent Auditor's Report on Consolidated Financial Statements of Aequs Limited (formerly known as Aequs Private Limited) For the year ended March 31, 2025:

Clause xxi of the Independent Auditor's Report Inouropinionandaccordingtotheinformationandexplanationsgiventous,followingcompaniesincorporatedinIndiaandincludedintheconsolidatedfinancialstatements,haveunfavourableremarks,qualificationor adverse remarks given by the respective auditors in their reports under the Companies (Auditor's Report) Order, 2020 (CARO):

S. No. Name of entities CIN Holding company / Clause number of the CARO report which is unfavourable or Subsidiary / JV / qualified or adverse Associate 1 Aequs Limited U80302KA2000PLC026760 Holding Company ii(b), iii(c), iii(d), iii(f) and xiv(a) 2 AeroStructures Manufacturing India Private Limited U29253KA2013PTC067763 Subsidiary ii(a), ii(b) and xiv(a) 3 Aequs Consumer Products Private Limited U28995KA2019PTC129087 Subsidiary i(b), xiv(a) and xvii 4 Koppal Toys Molding COE Private Limited U36999KA2021PTC150753 Subsidiary xvii 5 Aerostructures Assemblies India Private Limited U29253KA2013PTC067804 Subsidiary ii(b) 6 Aequs Home Appliances Private Limited U31904KA2021PTC150511 Subsidiary vii(a) and xvii 7 Aequs Toys Private Limited U26400KA2021PTC150503 Subsidiary vii(a) and xvii Accordingtotheinformationandexplanationsgiventous,basedonourexamination,inrespectofthefollowingsubsidiarycompaniesandincorporatedinIndiaandincludedintheconsolidatedfinancialstatements,the CARO report relating to them has not been issued by their respective auditors till the date of this principal auditors report.

S. No. Name of entities CIN Holding company / Subsidiary / JV / Associate 1 Aequs Engineered Plastics Private Limited U22209KA2015PTC078777 Subsidiary 2 Aequs Force Consumer Products Private Limited U28191KA2018PTC114901 Subsidiary 3 SQuAD Forging India Private Limited U28910KA2011PTC056681 Joint venture 4 Aerospace Processing India Private Limited U35303KA2007PTC043311 Joint venture 5 Aequs Cookware private Limited U27504KA2024PTC189903 Joint venture For the year ended March 31, 2024:

Clause xxi of the Independent Auditor's Report Inouropinionandaccordingtotheinformationandexplanationsgiventous,followingcompaniesincorporatedinIndiaandincludedintheconsolidatedfinancialstatements,haveunfavourableremarks,qualificationor adverse remarks given by the respective auditors in their reports under the Companies (Auditor's Report) Order, 2020 (CARO):

S. No. Name of entities CIN Holding company / Clause number of the CARO report which is unfavourable or Subsidiary / JV / qualified or adverse Associate 1 Aequs Private Limited U80302KA2000PLC026760 Holding company (ii) (b), iii (c), iii (d), iii (f), (xiv) (a) and (xvii) 2 AeroStructures Manufacturing India Private Limited U29253KA2013PTC067763 Subsidiary (ii) (b), iii (c), iii (d), iii (f), and (xiv) (a) 3 Aequs Engineered Plastics Private Limited U22209KA2015PTC078777 Subsidiary (ii) (b), (xiv) (a) and (xvii) 4 Aequs Force Consumer Products Private Limited U28191KA2018PTC114901 Subsidiary (ii) (b), iii (c), iii (f), (xiv) (a) and (xvii) 5 Aequs Consumer Products Private Limited U28995KA2019PTC129087 Subsidiary (ii) (b), (xiv) (a) and (xvii) 6 SQuAD Forging India Private Limited U28910KA2011PTC056681 Joint venture (ii) (b) 7 Aequs Toys Private Limited U26400KA2021PTC150503 Subsidiary vii (a) and xvii 8 Koppal Toys Molding COE Private Limited U36999KA2021PTC150753 Subsidiary xvii 9 Aerostructures Assemblies India Private Limited U29253KA2013PTC067804 Subsidiary (ii) (b) 10 Aequs Home Appliances Private Limited U31904KA2021PTC150511 Subsidiary vii (a) and xvii Accordingtotheinformationandexplanationsgiventous,basedonourexamination,inrespectofthefollowingsubsidiarycompaniesandincorporatedinIndiaandincludedintheconsolidatedfinancialstatements,the CARO report relating to them has not been issued by their respective auditors till the date of this principal auditors report.

Name of the entities CIN Holding company / Subsidiary / JV / Associate Koppal Toys Tooling COE Private Limited U36990KA2021PTC151211 Subsidiary 520Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) III. Matters included in the Companies (Auditor's Report) Order which does not require any corrective adjustment in the Restated Consolidated Financial information (continued):

In the Independent Auditor's Report on Standalone Financial Statements of Aequs Limited (formerly known as Aequs Private Limited) For the year ended March 31, 2023:

Clause xxi of the Independent Auditor's Report Inouropinionandaccordingtotheinformationandexplanationsgiventous,followingcompaniesincorporatedinIndiaandincludedintheconsolidatedfinancialstatements,haveunfavourableremarks,qualificationor adverse remarks given by the respective auditors in their reports under the Companies (Auditor's Report) Order, 2020 (CARO):

Holding company / Clause number of the CARO report which is unfavourable or S. No. Name of entities CIN Subsidiary / JV / qualified or adverse Associate Aequs Private Limited U80302KA2000PLC026760 Holding company ii(b), iii(a), iii(c) and iii(f), vii(b), ix(d), ix(e), xvi(d), xvii 1 2 AeroStructures Manufacturing India Private Limited U29253KA2013PTC067763 Subsidiary ii(b), iii (a), iii(c) and iii(f), vii(b) and (xvi)(d) 3 Aequs Engineered Plastics Private Limited U22209KA2015PTC078777 Subsidiary ii(a), ii(b), xvi(d), xvii 4 Aequs Force Consumer Products Private Limited U28191KA2018PTC114901 Subsidiary ii(a), ii(b), xvi(d), xvii 5 Aequs Consumer Products Private Limited U28995KA2019PTC129087 Subsidiary ii(b), iii(a), xvi(d), xvii 6 Aequs Toys Private Limited U26400KA2021PTC150503 Subsidiary iii(a), vii(a), xvi(d), xvii 7 Koppal Toys Molding COE Private Limited U36999KA2021PTC150753 Subsidiary vii(a), xvi(d), xvii 8 Koppal Toys Tooling COE Private Limited U36990KA2021PTC151211 Subsidiary iii(a), iii(f), vii(a), xvi(d), xvii 9 Aerostructures Assemblies India Private Limited U29253KA2013PTC067804 Subsidiary vii(a) and xvi(d) 10 Aerospace Processing India Private Limited U35303KA2007PTC043311 Joint venture vii(a), vii(b) and xvi (d) 11 SQuAD Forging India Private Limited U28910KA2011PTC056681 Joint venture ii(b), iii(a), xvi(d), xvii For the year ended March 31, 2025:

Clause (ii) (b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,theCompanyhasbeensanctionedworkingcapitallimitsinexcessoffivecrorerupees,in aggregate,frombanksorfinancialinstitutionsonthebasisofsecurityofcurrentassets.Inouropinion,thequarterlyreturnsorstatementsfiledbytheCompanywithsuchbanksorfinancialinstitutionsareinagreementwith

the books of account of the Company except as follows:

Quarter Name of bank Particulars Amount as per Amount as reported in the quarterly Amount of Whether books of account return/ statement difference (Rs. return/statement (Rs. Millions) (Rs. Millions) Millions) subsequently rectified Mar-25 HDFC Bank Inventories 372.74 378.00 ( 5.26) No Mar-25 Trade receivables 171.44 172.00 ( 0.56) No Clause (iii)(c) of CARO, 2020 order AccordingtotheinformationandexplanatiosgiventousandonthebasisofourexaminationoftherecordsoftheCompany,inthecaseofloansgiven,inouropiniontherepaymentofprincipalandpaymentofinteresthas beenstipulatedandtherepaymentsorreceiptshavebeenregularexceptfortheloanofRs.361.50milliongiventosubsidiarieswhicharerepayableondemand.Asinformedtous,theCompanyhasnotdemandedrepayment oftheloanduringtheyear.Thus,therehasbeennodefaultonthepartofthepartytowhomthemoneyhasbeenlent.Further,theCompanyhasnotgivenanyadvanceinthenatureofloantoanypartyduringtheyear.

However,incaseofoutstandingadvanceinnatureofloanofRs.19.33milliongiventoFellowsubsidiaryandRs.47.27milliontoSubsidiary,scheduleforrepaymentprincipalandpaymentinteresthasnotbeenstipulated and accordingly we are unable to comment on whether repayments or receipts are regular.

Clause (iii)(d) of CARO, 2020 order AccordingtoinformationexplanationsgivenusbasisourexaminationrecordsCompany,caseadvancenatureloansRs19.33milliongivenFellowsubsidiaryRs47.27millionSubsidiaryschedulerepaymentprincipal payment interest have not stipulated accordingly we unable comment amount overdue more than ninety days Further there no overdue amount more than ninety days respect loans given Clause (iii)(f) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,inouropiniontheCompanyhasnotgrantedanyloansoradvancesinthenatureofloanseither repayable on demand or without specifying any terms or period of repayment except for the following loans to its Related Party as defined in Clause (76) of Section 2 of the Companies Act, 2013 (“the Act”):.

Related party (Rs. Millions) Aggregate of loans - Repayable on demand 361.50 Percentage of loans to the total loans 66.76% Further, the Company has not given any advances in the nature of loans to any party during the year.

Clause (xiv)(a) of CARO, 2020 order Inouropinionandbasedontheinformationandexplanationsprovidedtous,theCompanyisnotrequiredtohaveaninternalauditsystemasperSection138oftheAct.However,theCompanyhasaninternalauditsystem which is commensurate with the size and nature of its business except that internal audit has only been completed for part of the year.

For the year ended March 31, 2024:

Clause (ii) (b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,theCompanyhasbeensanctionedworkingcapitallimitsinexcessoffivecrorerupees,in aggregate,frombanksorfinancialinstitutionsonthebasisofsecurityofcurrentassets.Inouropinion,thequarterlyreturnsorstatementsfiledbytheCompanywithsuchbanksorfinancialinstitutionsareinagreementwith

the books of account of the Company except as follows:

Quarter Name of bank Particulars Amount as per Amount as reported in the quarterly Amount of Whether books of account return/ statement difference (Rs. return/statement (Rs. Millions) (Rs. Millions) Millions) subsequently rectified Jun-23 HDFC Bank Inventories 230.00 261.00 (31.00)No Sep-23 Inventories 243.00 275.00 (32.00)No Dec-23 Inventories 265.00 296.00 (31.00)No Mar-24 Inventories 302.00 312.00 (10.00)No Jun-23 Trade receivables 114.00 64.00 50.00 No Sep-23 Trade receivables 117.00 67.00 50.00 No Dec-23 Trade receivables 104.00 83.00 21.00 No Mar-24 Trade receivables 118.00 86.00 32.00 No 521Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) III. Matters included in the Companies (Auditor's Report) Order which does not require any corrective adjustment in the Restated Consolidated Financial information (continued):

In the Independent Auditor's Report on Standalone Financial Statements of Aequs Limited (formerly known as Aequs Private Limited) Clause (iii) (c) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,inthecaseoftermloanofRs.990.00giventoSubsidiaries,inouropiniontherepaymentof principalandpaymentofinteresthasbeenstipulated,exceptfortheloanofRs.784.00giventoAerospaceManufacturingHoldingsPrivateLimited(Subsidiary)whichisrepayableondemand.Asinformedtous,the Companyhaddemandedforrepaymentoftheloan,andsettledwithdefaultonthepartofthepartytowhomthemoneyhadbeenlent.Accordingtotheinformationandexplanationsgiventousandonthebasisofour examinationoftherecordsoftheCompany,incaseofadvanceinthenatureofloanofRs.26.00giventoFellowsubsidiaryandRs.2.50toSubsidiary,thescheduleofrepaymentofprincipalandpaymentofinteresthasnot been stipulated and accordingly we are unable to comment on whether the repayments or receipts are regular.

Clause (iii) (d) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,incaseofadvanceinthenatureofloansRs.26.00giventoFellowsubsidiaryandRs.2.50to Subsidiary,thescheduleforrepaymentofprincipalandpaymentofinteresthavenotbeenstipulatedandaccordinglyweareunabletocommentontheamountoverdueformorethanninetydays.Accordingtotheinformation and explanations given to us and on the basis of our examination of the records of the Company, there is no overdue amount for more than ninety days in respect of loans given.

Clause (iii) (f) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,inouropiniontheCompanyhasnotgrantedanyloansoradvancesinthenatureofloanseither repayable on demand or without specifying any terms or period of repayment except for the following loans to its Related Party as defined in Clause (76) of Section 2 of the Companies Act, 2013 ("the Act"):.

Related party (Rs. Millions) Aggregate of loans - Repayable on demand 193.00 Percentage of loans to the total loans 46.5% Clause (xiv) (a) of CARO, 2020 order Inouropinionandbasedontheinformationandexplanationsprovidedtous,theCompanyisnotrequiredtohaveaninternalauditsystemasperSection138oftheAct.However,theCompanyhasaninternalauditsystem which is commensurate with the size and nature of its business except that internal audit has only been completed for part of the year.

Clause (xvii) of CARO, 2020 order The Company has not incurred cash losses in the current year and had incurred cash losses of Rs. 58.00 in the immediately preceding financial year.

For the year ended March 31, 2023:

Clause (ii) (b) of CARO, 2020 order Duringtheyear,theCompanyhasbeensanctionedworkingcapitallimitsinexcessofRs.5crores,inaggregate,fromabankonthebasisofsecurityofcurrentassets.TheCompanyhasfiledquarterlyreturnsorstatements with such bank, which are not in agreement with the unaudited books of account as set out below. Also refer Note 14(i)(3) to the standalone financial statements.

Quarter Name of bank Aggregate working Nature of current Amount as per books of account Amount as Amount of Reason for capital limits asset offered as (Rs. Millions) reported in the difference (Rs. difference sanctioned (Rs. security quarterly return/ Millions) Millions) statement (Rs. Millions) Jun-22 HDFC Bank 250.00 Inventories 186.00 297.00 (111.00) Note (b) below Sep-22 Inventories 200.00 301.00 (101.00) Dec-22 Inventories 207.00 304.00 (97.00) Mar-23 Inventories 237.00 249.00 (12.00) Note (c) below Jun-22 Trade receivables 110.00 80.00 30.00 Note (d) below Sep-22 Trade receivables 123.00 76.00 47.00 Dec-22 Trade receivables 112.00 65.00 47.00 Mar-23 Trade receivables 130.00 90.00 40.00

(a)Asperthesanctionletter,theCompanyneedstoexcludeobsoleteinventoriesandthose,inventoriesagedmorethan90days.However,theCompanyhasexcludedinventoriesinlinewiththeprovisioningpolicyfollowed by the Company.

(b) Amount reported quarterly to a bank is excluding the provision for slow moving.

(c) Amount reported quarterly to a bank is excluding the provision for slow moving inventory and year-end valuation related adjustments made in books of accounts for March 2023.

(d) Amount reported quarterly to a bank is excluding the inter-company receivables and unrealised gain or loss balance. (This space is intentionally left blank) 522Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of Aequs Limited (formerly known as Aequs Private Limited) (continued):

For the year ended March 31, 2023 (continued):

Clause (iii) (a) of CARO, 2020 order TheCompanyhasmadeinvestmentsin7companies,grantedunsecuredloansto6companiesduringtheyearandprovidedguaranteesto8companiesduringtheyear.Theaggregateamountduringtheyear,andbalance outstanding at the balance sheet date with respect to such investments, loans and guarantees to subsidiary and associate and to parties other than subsidiary and associate are as per the table given below.

Investments Guarantees Loans (Rs. Millions) (Rs. Millions) (Rs. Millions) Aggregate amount granted/ provided during the year - Subsidiaries 1,632.00 81.00 344.00 - Others (Joint ventures) 72.00 5.00 1.00 Balance outstanding as at balance sheet date in respect of the above amounts granted/provided during the year - Subsidiaries 1,632.00 81.00 135.00 - Others (Joint ventures) 72.00 5.00 1.00 (Also, refer Notes 6, 7(iv) and 35B to the standalone financial statements) Clause (iii) (c) of CARO, 2020 order Inrespectoftheaforesaidloans,thescheduleofrepaymentofprincipalandpaymentofinteresthasbeenstipulatedbytheCompany.InrespectofadvancesinnatureofloansgrantedbytheCompanyintheprioryearsand outstandingasatyearendamountingtoRs.30.00,noscheduleforrepaymentofprincipalhasbeenstipulatedbytheCompanyandthereisnointereststipulatedasperthetermsofsuchadvancesinthenatureofloans.

Therefore, in the absence of stipulation of repayment terms, we are unable to comment on the regularity of repayment of principal and payment of interest.

Clause (iii) (f) of CARO, 2020 order ThefollowingloansweregrantedduringtheyeartorelatedpartiesunderSection2(76),whicharerepayableondemandorwherenoscheduleforrepaymentofprincipalandpaymentofinteresthasbeenstipulatedbythe Company.

All parties Promoters Other related (Rs. Millions) (Rs. Millions) parties (Rs. Millions) Aggregate of loans repayable on demand 214.00 - 214.00 Percentage of above loans to the total loans granted during the year 62% - 62% Also refer Note 7(iv) to the standalone financial statements.

Clause (vii) (b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandtherecordsoftheCompanyexaminedbyus,therearenostatutoryduesofgoodsandservicestax,providentfund,employees'stateinsurance,salestax,service tax,dutyofcustoms,dutyofexciseandvalueaddedtaxwhichhavenotbeendepositedonaccountofanydispute.TheparticularsofincometaxasatMarch31,2023whichhavenotbeendepositedonaccountofadispute,

are as follows:

Name of statue Nature of dues Amount Period to which the Forum where the dispute is pending Remarks, if any (Rs. Millions)* amount relates Income Tax Act, Income tax 780.00 Financial year High court of Karnataka - 1961 2017-18 Income Tax Act, Income tax 25.00 Financial year CIT(A) - 1961 2016-17 *IncometaxrefundclaimedbytheCompany(pertainingtofinancialyear2020,2021&2022amountingtoINR13.00)hasbeenadjustedbyTaxdepartmentagainsttheaboveoutstandingdemand-ReferNote32ofthe standalone financial statements.

Clause (ix)(d) of CARO, 2020 order Accordingtotheinformationandexplanationsgiventous,andtheproceduresperformedbyus,andonanoverallexaminationofthestandalonefinancialstatementsoftheCompany,wereportthattheCompanyhasused funds raised on short-term basis aggregating Rs 205.00 for long-term purposes.

Clause (ix)(e) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonanoverallexaminationofthestandalonefinancialstatementsoftheCompany,wereportthattheCompanyhastakenfundsfromthefollowingentitiesand

persons on account of or to meet the obligations of its subsidiaries as per details below:

Nature of fund Name of lender Amount involved Name of the Relation (subsidiary / JV / associate) Nature of Remarks, if any taken (Rs. Million) subsidiary, joint transaction for venture, associate which fund utilized Equity share Aequs Manufacturing 129.00 Aequs Aerospace Subsidiary Repayment of loan To meet the capital and Investments Private Limited BV, The Netherlands by Subsidiary obligations of the securities subsidiary premium Clause (xvi)(d) of CARO, 2020 order BasedontheinformationandexplanationsprovidedbythemanagementoftheCompany,theGrouphas1CICaspartoftheGroupasdetailedinNote39(xiv)tothestandalonefinancialstatements.Wehavenot,however, separately evaluated whether the information provided by the management is accurate and complete.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses of Rs. 58.00 in the financial year and had incurred cash losses of Rs. 11.00 in the immediately preceding financial year. (This space is intentionally left blank) 523Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of AeroStructures Manufacturing India Private Limited For the year ended March 31, 2025:

Clause (ii)(a) of CARO, 2020 order Theinventory,exceptgoods-in-transitandstockslyingwiththirdparties,hasbeenphysicallyverifiedbythemanagementduringtheyear.Forstockslyingwiththirdpartiesattheyear-end,writtenconfirmationshavebeen obtainedandforgoods-in-transitsubsequentevidenceofreceiptshasbeenlinkedwithinventoryrecords.Inouropinion,thefrequencyofsuchverificationisreasonableandproceduresandcoverageasfollowedby managementwereappropriate.Inthecaseofoneclassofinventorythediscrepanciesnoticedonverificationbetweenthephysicalstocksandthebookrecordsweremorethan10%intheaggregateandthesehavebeen properly dealt with in the books of account.

Clause (ii)(b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,theCompanyhasbeensanctionedworkingcapitallimitsinexcessoffivecrorerupees,in aggregate,frombanksorfinancialinstitutionsonthebasisofsecurityofcurrentassets.Inouropinion,thequarterlyreturnsorstatementsfiledbytheCompanywithsuchbanksorfinancialinstitutionsareinagreementwith

the books of account of the Company except as follows:

Quarter Name of bank Particulars Amount as per Amount as reported in the quarterly Amount of Whether books of account return/ statement difference (Rs. return/statement (Rs. Millions) (Rs. Millions) Millions) subsequently rectified Jun-24 HDFC bank Inventories 2,019.00 2,019.70 (0.70) No Dec-24 Inventories 2,574.00 2,577.30 (3.30) No Mar-25 Inventories 2,450.88 2,480.50 (29.62) No Jun-24 Trade receivables 1,058.00 1,060.00 (2.00) No Mar-25 Trade receivables 1,266.91 1,277.00 (10.09) No Jun-24 Axis bank Inventories 2,019.00 2,019.70 (0.70) No Dec-24 Inventories 2,574.00 2,577.30 (3.30) No Mar-25 Inventories 2,450.88 2,480.50 (29.62) No Jun-24 Trade receivables 1,058.00 849.83 208.17 No Sep-24 Trade receivables 1,061.40 780.07 281.33 No Dec-24 Trade receivables 1,059.00 759.67 299.33 No Mar-25 Trade receivables 1,266.91 984.08 282.83 No Clause (xiv)(a) of CARO, 2020 order Basedoninformationandexplanationsprovidedtousandourauditprocedures,inouropinion,theCompanyhasaninternalauditsystemcommensuratewiththesizeandnatureofitsbusiness,exceptthatinternalaudithas only been completed for part of the year.

For the year ended March 31, 2024:

Clause (ii)(b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,theCompanyhasbeensanctionedworkingcapitallimitsinexcessoffivecrorerupees,in aggregate,frombanksorfinancialinstitutionsonthebasisofsecurityofcurrentassets.Inouropinion,thequarterlyreturnsorstatementsfiledbytheCompanywithsuchbanksorfinancialinstitutionsareinagreementwith

the books of account of the Company except as follows:

Quarter Name of bank Particulars Amount as per Amount as reported in the quarterly Amount of Whether books of account return/ statement difference (Rs. return/statement (Rs. Millions) (Rs. Millions) Millions) subsequently rectified Jun-23 HDFC and Axis bank Inventories 1,587.00 1,679.00 (92.00)No Sep-23 Inventories 1,775.00 1,888.00 (113.00)No Dec-23 Inventories 1,686.00 1,803.00 (117.00)No Mar-24 Inventories 1,872.00 1,851.00 21.00 No Jun-23 Trade receivables 881.00 689.00 192.00 No Sep-23 Trade receivables 892.00 665.00 227.00 No Dec-23 Trade receivables 958.00 699.00 259.00 No Mar-22 Trade receivables 1,097.00 850.00 247.00 No Clause (iii)(c) of CARO, 2020 order According to the information and explanations given to us and on the basis of our examination of the records of the Company, - in the case of a loan given to a subsidiary outstanding as at the year end amounting to Rs. 225.00, the repayment of principal and payment of interest has been stipulated. The repayments are not yet due.

-inthecaseofaloangiventoasubsidiaryoutstandingasattheyearendamountingtoRs.124.00,theloanisrepayableondemand.Asinformedtous,theCompanyhasnotdemandedrepaymentoftheloanduringtheyear.

Thus, there has been no default on the part of the party to whom the money has been lent. - in the case of loans given to holding company which were repayable on demand, the same were demanded for repayment and settled without default.

-incaseofadvanceinthenatureofloangiventoanassociateoutstandingattheyearendamountingtoRs.118.00,thescheduleofrepaymentofprincipal,andpaymentofinteresthasnotbeenstipulatedandaccordinglywe are unable to comment on whether the repayments or receipts are regular.

Clause (iii)(d) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,incaseofadvanceinthenatureofloansRs.118.00giventoAssociate,theschedulefor repaymentofprincipalandpaymentofinteresthavenotbeenstipulatedandaccordinglyweareunabletocommentontheamountoverdueformorethanninetydays.Accordingtotheinformationandexplanationsgiventous and on the basis of our examination of the records of the Company, there is no overdue amount for more than ninety days in respect of loans given.

(This space is intentionally left blank) 524Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of AeroStructures Manufacturing India Private Limited (continued) For the year ended March 31, 2024 (continued):

Clause (iii)(f) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,inouropiniontheCompanyhasnotgrantedanyloansoradvancesinthenatureofloanseither repayable on demand or without specifying any terms or period of repayment except for the following loans to its Related Party as defined in Clause (76) of Section 2 of the Companies Act, 2013 ("the Act"):.

Related party (Rs. Millions) Aggregate of loans - Repayable on demand 60.00 Percentage of loans to the total loans 100% Clause (xiv)(a) of CARO, 2020 order Basedoninformationandexplanationsprovidedtousandourauditprocedures,inouropinion,theCompanyhasaninternalauditsystemcommensuratewiththesizeandnatureofitsbusiness,exceptthatinternalaudithas only been completed for part of the year.

For the year ended March 31, 2023:

Clause (ii)(b) of CARO, 2020 order Duringtheyear,theCompanyhasbeensanctionedworkingcapitallimitsinexcessofRs.5crores,inaggregate,frombanksonthebasisofsecurityofcurrentassets.TheCompanyhasfiledquarterlyreturnsorstatements with such banks, which are not in agreement with the unaudited books of account as set out below. Also refer note 13(i) to the financial statements.

Quarter Name of banks Aggregate working Nature of current Amount as per books of account Amount as Amount of Reason for capital limits asset offered as (Rs. Millions) reported in the difference (Rs. difference sanctioned (Rs. security quarterly return/ Millions) Millions) statement (Rs. Millions) Jun-22 Axis and HDFC Bank 1,450.00 Inventories 984.00 1,047.00 (63.00)Note (a) below Sep-22 Inventories 991.00 1,123.00 (132.00) Dec-22 Inventories 1,206.00 1,307.00 (101.00) Mar-23 Inventories 1,513.00 1,564.00 (51.00)Note (b) below Sep-22 Trade receivables 588.00 589.00 (1.00)Note (c) below Dec-22 Trade receivables 650.00 651.00 (1.00) Mar-23 Trade receivables 624.00 667.00 (43.00)

(a) Represents provision for slow moving inventory made as per books of account.

(b) Represents provision for slow moving inventory and year-end valuation related adjustments made in the books of account.

(c) Represents adjustments made by the Company post submission of information to the bank.

(d) Trade receivables balance excludes amount receivable from related parties Clause (iii)(a) of CARO, 2020 order TheCompanyhasmadeinvestmentsintwocompanieswhichareentitiesincorporatedoutsideIndia,grantedloans/advancesinnatureofloanstofivecompaniesandstoodguaranteetothreecompanies.Theaggregate amountduringtheyear,andbalanceoutstandingatthebalancesheetdatewithrespecttosuchloans,advancesinnatureofloansandguaranteestoassociatesandtopartiesotherthansubsidiaryandassociateareasperthe

table given below:

Guarantees Loans Advances in nature Particluars (Rs. Millions) (Rs. Millions) of loans (Rs. Millions) Aggregate amount granted/ provided during the year - Associate - - 20.00 - Others 300.00 400.00 - Balance outstanding as at balance sheet date in respect of the above case - Associate - - 20.00 - Others 300.00 170.00 - (Also refer notes 6 (ii), 6 (vi) and 13 (iii) to the financial statements) Clause (iii)(c) of CARO, 2020 order InrespectofloangrantedbytheCompanyintheprioryearstosubsidiaryandoutstandingasatyearendamountingtoRs.209.00,thescheduleofrepaymentofprincipalandpaymentofinteresthasbeenstipulated,andthe loan including interest is not yet due as per the terms agreed.

InrespectofloangrantedbytheCompanyintheprioryearstosubsidiaryandoutstandingasatyearendamountingtoRs.109.00andloangrantedbytheCompanyduringtheyeartotheholdingCompanyandoutstandingas attheyearendamountingtoRs.170.00,noscheduleforrepaymentofprincipalandpaymentofinteresthasbeenstipulatedbytheCompanyastheloansarerepayableondemand.Therefore,weareunabletocommentonthe regularity of repayment of principal and payment of interest.

InrespectofaforesaidadvancesinnatureofloansgiventootherrelatedpartiesandoutstandingasatyearendamountingtoRs.118.00,noscheduleforrepaymentofprincipalhasbeenstipulatedbytheCompanyandthereis no interest stipulated as per the terms of such advances in the nature of loans. Therefore, we are unable to comment on the regularity of repayment of principal and payment of interest.

Clause (iii)(f) of CARO, 2020 order Followingloans/advancesinnatureofloansweregrantedduringtheyear,includingtopromoters/relatedpartiesunderSection2(76)wherenoscheduleforrepaymentofprincipalandpaymentofinteresthasbeenstipulated by the Company.

Promoters Related parties Particluars (Rs. Millions) (Rs. Millions) Aggregate of loans/advances in nature of loan - Repayable on demand 395.00 5.00 - Agreement does not specify any terms or period of repayment - 20.00 Percentage of loans/advances in nature of loan to the total loans granted during the year 94% 6% (Also refer notes 6 (ii) and 6 (vi) to the financial statements) 525Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of AeroStructures Manufacturing India Private Limited (continued) For the year ended March 31, 2023 (continued):

Clause (vii)(b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandtherecordsoftheCompanyexaminedbyus,theparticularsofstatutoryduesreferredtoinsub-clause(a)asatMarch312023,whichhavenotbeendeposited on account of a dispute, are as follows:

Nature of Nature of dues Amount Period to which the Forum where the dispute is pending statute (Rs. in million) amount relates Income Tax Act, Income Tax 8.00 Assessment year Commissioner of Income Tax - 1961 2020-21 (Appeals) Clause (xvi)(d) of CARO, 2020 order BasedontheinformationandexplanationsprovidedbythemanagementoftheCompany,theGrouphas1CICaspartoftheGroupasdetailedinnote35(xiv)tothefinancialstatements.Wehavenot,however,separately evaluated whether the information provided by the management is accurate and complete.

In the Independent Auditor's Report on Standalone Financial Statements of Aequs Engineered Plastics Private Limited For the year ended March 31, 2024:

Clause (ii)(b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,theCompanyhasbeensanctionedworkingcapitallimitsinexcessoffivecrorerupees,in aggregate,frombanksorfinancialinstitutionsonthebasisofsecurityofcurrentassets.Inouropinion,thequarterlyreturnsorstatementsfiledbytheCompanywithsuchbanksorfinancialinstitutionsareinagreementwith

the books of account of the Company except as follows:

Quarter Name of bank Particulars Amount as per Amount as reported in the quarterly Amount of Whether books of account return/ statement difference (Rs. return/statement (Rs. Millions) (Rs. Millions) Millions) subsequently rectified Jun-23 Axis and HDFC Bank Inventories 407.00 443.00 (36.00)No Sep-23 Inventories 387.00 424.00 (37.00)No Dec-23 Inventories 351.00 397.00 (46.00)No Mar-24 Inventories 352.00 399.00 (47.00)No Jun-23 Trade receivables 117.00 124.00 (7.00)No Sep-23 Trade receivables 80.00 102.00 (22.00)No Dec-23 Trade receivables 72.00 83.00 (11.00)No Mar-24 Trade receivables 70.00 75.00 (5.00)No Clause (xiv)(a) of CARO, 2020 order Inouropinionandbasedontheinformationandexplanationsprovidedtous,theCompanyisnotrequiredtohaveaninternalauditsystemasperSection138oftheAct.However,theCompanyhasaninternalauditsystem which is commensurate with the size and nature of its business except that internal audit has only been completed for part of the year.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses of Rs 5.00 in the current financial year and Rs 91.00 in the immediately preceding financial year For the year ended March 31, 2023:

Clause (ii)(a) of CARO, 2020 order Thephysicalverificationofinventory[excludingwork-in-progress]hasbeenconductedatreasonableintervalsbytheManagementduringtheyearand,inouropinion,thecoverageandprocedureofsuchverificationby Managementisappropriateexceptformaintenanceandretentionofdocumentationrelatingtocountsconductedduringtheyear.Inrespectofwork-in-progressreferNote9(iii)tothefinancialstatements.Thediscrepancies noticedonphysicalverificationofinventoryascomparedtobookrecordswerenot10%ormoreinaggregateforeachclassofinventoryexceptincaseofrawmaterialswhereindiscrepanciesamountingtoRs18.00were noted, and have been appropriately dealt with in the books of account.

(This space is intentionally left blank) 526Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of Aequs Engineered Plastics Private Limited (continued) For the year ended March 31, 2023 (continued):

Clause (ii)(b) of CARO, 2020 order Duringtheyear,theCompanyhasbeensanctionedworkingcapitallimitsinexcessofRs.5crores,inaggregate,frombanksonthebasisofsecurityofcurrentassets.TheCompanyhasfiledquarterlyreturnsorstatements with such banks, which are not in agreement with the unaudited books of account as set out below (Also refer Note 12(i)(e) to the financial statements).

Quarter Name of bank Aggregate working Nature of current Amount as per books of account Amount as Amount of Reason for capital limits asset offered as (Rs. Millions) reported in the difference (Rs. difference sanctioned (Rs. security quarterly return/ Millions) Millions) statement (Rs. Millions) Jun-22 Axis bank 250.00 Inventories 466.00 477.00 (12.00)1. Adjustment entries representing Sep-22 Inventories 479.00 498.00 (19.00)provisions for slow moving and obsolete inventories and Dec-22 Inventories 384.00 471.00 (87.00) inventorisation of overheads made after Mar-23 Inventories 401.00 410.00 (9.00)submission of the Statement.

Jun-22 Trade receivables 174.00 164.00 10.00 1. Adjustment entries representing Loss allowance for Sep-22 Trade receivables 142.00 118.00 24.00 receivables, adjustment of customer advances Dec-22 Trade receivables 96.00 89.00 7.00 after submission of the Statement.

Mar-23 Trade receivables 81.00 91.00 (10.00)2. Exclusion of related party balances from the Statement.

Clause (xvi)(d) of CARO, 2020 order BasedontheinformationandexplanationsprovidedbythemanagementoftheCompany,theGroup(asdefinedintheCoreInvestmentCompanies(ReserveBank)Directions,2016)hasoneCICaspartoftheGroupas detailed in Note 37 to the financial statements. We have not, however, separately evaluated whether the information provided by the management is accurate and complete.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses of Rs. 91.00 in the financial year and of Rs. 414.00 in the immediately preceding financial year.

In the Independent Auditor's Report on Standalone Financial Statements of Aequs Force Consumer Products Private Limited For the year ended March 31, 2024:

Clause (ii)(b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,theCompanyhasbeensanctionedworkingcapitallimitsinexcessoffivecrorerupees,in aggregate,frombanksorfinancialinstitutionsonthebasisofsecurityofcurrentassets.Inouropinion,thequarterlyreturnsorstatementsfiledbytheCompanywithsuchbanksorfinancialinstitutionsareinagreementwith

the books of account of the Company except as follows:

Quarter ended Name of the bank/ financial Particulars Amount as per Amount as reported in the quarterly Amount of Whether institution books of account return/ statement difference (Rs. return/statement (Rs. Millions) (Rs. Millions) Millions) subsequently rectified Jun-23 Axis bank Inventories 274.00 305.00 (31.00)No Sep-23 256.00 308.00 (52.00)No Dec-23 255.00 297.00 (42.00)No Mar-24 218.00 206.00 12.00 No Jun-23 Trade receivables 167.00 153.00 14.00 No Sep-23 62.00 115.00 (53.00)No Dec-23 24.00 58.00 (34.00)No Mar-24 95.00 91.00 4.00 No Clause (iii)(c) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,theunsecuredloanofRs.4.00giventoKoppalToysMoldingCOEPrivate Limitedwhichis repayableondemand.Asinformedtous,theCompanyhasnotdemandedrepaymentoftheloanduringtheyear.Thus,therehasbeennodefaultonthepartofthepartytowhomthemoneyhasbeenlent. Thepaymentof interest has been regular. Further, the Company has not given any advance in the nature of loan to any party during the year.

Clause (iii)(f) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,inouropiniontheCompanyhasnotgrantedanyloansoradvancesinthenatureofloanseither repayableondemandorwithoutspecifyinganytermsorperiodofrepaymentexceptforthefollowingloansoradvancesinthenatureofloanstoitsrelatedpartiesasdefinedinClause(76)ofSection2oftheCompaniesAct, 2013 (“the Act”):.

Related parties (Rs. millions) Aggregate of loans - Repayable on demand 4.00 Percentage of loans to the total loans 100% (This space is intentionally left blank) 527Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of Aequs Force Consumer Products Private Limited (continued) For the year ended March 31, 2024(continued) :

Clause (xiv)(a) of CARO, 2020 order Inouropinionandbasedontheinformationandexplanationsprovidedtous,theCompanyisnotrequiredtohaveaninternalauditsystemasperSection138oftheAct.However,theCompanyhasaninternalauditsystem which is commensurate with the size and nature of its business except that internal audit has only been completed for part of the year.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses of Rs. 168.00 in the current financial year and Rs. 176.00 in the immediately preceding financial year.

For the year ended March 31, 2023:

Clause (ii)(a) of CARO, 2020 order Thephysicalverificationofinventory[excludingwork-in-progress]hasbeenconductedatreasonableintervalsbytheManagementduringtheyearand,inouropinion,thecoverageandprocedureofsuchverificationby Managementisappropriateexceptformaintenanceandretentionofdocumentationrelatingtocountsconductedduringtheyear.Inrespectofwork-in-progressreferNote8(iv)tothefinancialstatements.Thediscrepancies noticed on physical verification of inventory as compared to book records were not 10% or more in aggregate for each class of inventory.

Clause (ii)(b) of CARO, 2020 order Duringtheyear,theCompanyhasbeensanctionedworkingcapitallimitsinexcessofRs.5crores,inaggregate,frombanksonthebasisofsecurityofcurrentassets.TheCompanyhasfiledquarterlyreturnsorstatements with such banks, which are not in agreement with the unaudited books of account as set out below (Also refer Note 12(i)(d) to the financial statements).

Quarter ended Aggregate working capital Name of the bank/ Nature of current Amount as per books of account Amount as Amount of Reason for limits sanctioned (Rs. financial institution asset offered as (Rs. Millions) reported in the difference (Rs. difference Millions) security quarterly return/ Millions) statement (Rs. Millions) Jun-22 130.00 HDFC Bank Inventories 199.00 203.00 (4.00)1. Adjustment entries representing Sep-22 186.00 194.00 (8.00)provisions for slow moving and obsolete inventories and Dec-22 178.00 187.00 (9.00) inventorisation of overheads made after Mar-23 197.00 202.00 (5.00)submission of the Statement.

Jun-22 Trade receivables 232.00 128.00 104.00 1. Adjustment entries representing Loss allowance for Sep-22 274.00 204.00 70.00 receivables, adjustment of Dec-22 173.00 102.00 71.00 customer advances after submission of the Statement.

Mar-23 76.00 27.00 49.00 2. Exclusion of related party balances from the Statement.

Clause (xvi)(d) of CARO, 2020 order BasedontheinformationandexplanationsprovidedbythemanagementoftheCompany,theGroup(asdefinedintheCoreInvestmentCompanies(ReserveBank)Directions,2016)hasoneCICaspartoftheGroupas detailed in Note 35 to the financial statements. We have not, however, separately evaluated whether the information provided by the management is accurate and complete.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses of Rs. 176.00 in the financial year and of Rs. 222.00 in the immediately preceding financial year.

In the Independent Auditor's Report on Standalone Financial Statements of Aequs Consumer Products Private Limited For the year ended March 31, 2025:

Clause (i)(b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,theCompanyhasaregularprogrammeofphysicalverificationofitsproperty,plantand equipmentbywhichallproperty,plantandequipmentareverifiedinaphasedmanneroveraperiodofthreeyears.However,nophysicalverificationofassetswerecarriedoutduringtheyear.Hence,weareunableto commentonthediscrepancies,ifany.Duringtheyear,theCompanytransferreditsproperty,plantandequipmenttoanewlyincorporatedjointventureoftheholdingcompany.Consequently,otherthancapitalworkin progress, there were no property, plant and equipment held by the Company as at 31 March 2025.

Clause (xiv)(a) of CARO, 2020 order Inouropinionandbasedontheinformationandexplanationsprovidedtous,theCompanyisnotrequiredtohaveaninternalauditsystemasperSection138oftheAct.However,theCompanyhasaninternalauditsystem which is commensurate with the size and nature of its business except that internal audit has only been completed for part of the year.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses of Rs 131,308 thousands in the current financial year and Rs 164,207 thousands in the immediately preceding financial year.

528Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Inouropinionandbasedontheinformationandexplanationsprovidedtous,theCompanyisnotrequiredtohaveaninternalauditsystemasperSection138oftheAct.However,theCompanyhasan internal audit system which is commensurate with the size and nature of its business except that internal audit has only been completed for part of the year.

In the Independent Auditor's Report on Standalone Financial Statements of Aequs Force Consumer Products Private Limited (continued) For the year ended March 31, 2024:

Clause (ii)(b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,theCompanyhasbeensanctionedworkingcapitallimitsoffivecrorerupees,inaggregate,from banksorfinancialinstitutionsonthebasisofsecurityofcurrentassets.Inouropinion,thequarterlyreturnsorstatementsfiledbytheCompanywithsuchbanksorfinancialinstitutionsareinagreementwiththebooksof

account of the Company except as follows:

Quarter ended Name of the bank/ financial Nature of current Amount as per Amount as reported in the quarterly Amount of Whether institution asset offered as books of account return/ statement difference (Rs. return/statement security (Rs. Millions) (Rs. Millions) Millions) subsequently rectified Jun-23 HDFC Bank Inventories 40.53 53.75 (13.22)No Sep-23 Inventories 84.25 102.08 (17.84)No Dec-23 Inventories 99.61 114.47 (13.86)No Mar-24 Inventories 62.88 58.68 4.20 No Jun-23 Trade receivables 32.87 34.64 (1.77)No Sep-23 Trade receivables 85.50 87.27 (0.77)No Dec-23 Trade receivables 66.32 68.09 (1.77)No Mar-24 Trade receivables 44.54 47.17 (1.63)No Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of Aequs Consumer Products Private Limited (continued) For the year ended March 31, 2024 (continued):

Clause (xiv)(a) of CARO, 2020 order Inouropinionandbasedontheinformationandexplanationsprovidedtous,theCompanyisnotrequiredtohaveaninternalauditsystemasperSection138oftheAct.However,theCompanyhasaninternalauditsystem which is commensurate with the size and nature of its business except that internal audit has only been completed for part of the year.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses of Rs 164,207 thousands in the current financial year and Rs 139,017 thousands in the immediately preceding financial year.

For the year ended March 31, 2023:

Clause (ii)(b) of CARO, 2020 order Duringtheyear,theCompanyhasbeensanctionedworkingcapitallimitsofINR5crores,inaggregatefrombanksonthebasisofsecurityofcurrentassetsandaccordingly,thecompanyfiledthequarterlyreturnstatements with the bank that are not in agreement, with the unaudited books of account as set out below. Also refer Note 11(i) to the financial statements.

Quarter ended Name of the bank/ financial Aggregate working Nature of current Amount as per books of account Amount as Amount of Reason for institution capital limits asset offered as (Rs. Millions) reported in the difference (Rs. difference sanctioned (Rs. security quarterly return/ Millions) Millions) statement (Rs. Millions) Jun-22 HDFC Bank and 80.00 Inventories 40.69 41.66 (0.98)Note (a) below Sep-22 Canara Bank Inventories 67.83 71.53 (3.70) Dec-22 Inventories 55.70 39.07 16.62 Note (b) below Mar-23 Inventories 54.18 53.40 0.78 Sep-22 Trade receivables 58.81 68.98 (10.17)Note (c) below

(a) Valuation related adjustments.

(b) Inventory of newly acquired business not submitted in stock statement.

(c) Post submission of quarterly statement adjustment entries were posted by management.

Clause (iii)(a) of CARO, 2020 order TheCompanyhasmadeinvestmentinonecompanyduringtheyear.TheCompanyhasnotgrantedsecured/unsecuredloans/advancesinnatureofloans,orstoodguarantee,orprovidedsecuritytoanyparties.Therefore,the reportingunderclause3(iii),(iii)(a),(iii)(b),(iii)(c),(iii)(d),(iii)(e)and(iii)(f)oftheOrderwithrespecttoloans/advancesinnatureofloansorguaranteesorsecurityprovidedtootherpartiesarenotapplicabletothe Company. The aggregate amount during the year, and balance outstanding at the balance sheet date with respect to such investments to subsidiary is as per the table given below:

Investments Particulars (Amounts in millions) Aggregate amount invested during the year - Subsidiary 40.00 Balance outstanding as at balance sheet date in respect of such investment during the year - Subsidiary 42.96 Clause (xvi)(d) of CARO, 2020 order BasedontheinformationandexplanationsprovidedbythemanagementoftheCompany.TheGrouphasoneCICaspartoftheGroupasdetailedinNote35(xiv)tothefinancialstatements.Wehavenot,however,separately evaluated whether the information provided by the management is accurate and complete.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses of Rs 139.02 in the current financial year and Rs 47.32 in the immediately preceding financial year.

529Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) In the Independent Auditor's Report on Standalone Financial Statements of SQuAD Forging India Private Limited For the year ended March 31, 2024:

Clause (ii)(b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandonthebasisofourexaminationoftherecordsoftheCompany,theCompanyhasbeensanctionedworkingcapitallimitsinexcessoffivecrorerupees,in aggregate,frombanksorfinancialinstitutionsonthebasisofsecurityofcurrentassets.Inouropinion,thequarterlyreturnsorstatementsfiledbytheCompanywithsuchbanksorfinancialinstitutionsareinagreementwith

the books of account of the Company except as follows:

Quarter ended Name of the bank/ financial Nature of current Amount as per Amount as reported in the quarterly Amount of Whether institution asset offered as books of account return/ statement difference (Rs. return/statement security (Rs. Millions) (Rs. Millions) Millions) subsequently rectified Mar-24 HDFC Bank Inventories 311.49 313.49 (2.00)No Jun-23 Trade receivables 32.39 29.15 3.24 No Sep-23 Trade receivables 16.82 16.71 0.11 No Dec-23 Trade receivables 103.43 85.91 16.52 No Mar-24 Trade receivables 101.24 90.32 10.92 No For the year ended March 31, 2023:

Clause (ii)(b) of CARO, 2020 order Duringtheyear,theCompanyhasbeensanctioned(renewed)workingcapitallimitsinexcessofRs.5crores,inaggregate,frombanksonthebasisofsecurityofcurrentassets.TheCompanyhasfiledquarterlyreturnsor statements with such banks, which are not in agreement with the unaudited books of account as set out below. (Also refer Note 11(i) to the financial statements Quarter ended Name of the bank Aggregate working Nature of current Amount as per books of account Amount as Amount of Reason for capital limits asset offered as (Rs. Millions) reported in the difference (Rs. difference sanctioned security quarterly return/ Millions) (Rs. Millions) statement (Rs. Millions) Mar-23 HDFC Bank 200.00 Inventories 226.89 222.40 4.50 Adjustment entries representing provision for excessive and obsolete inventories made after submission of statement.

Jun-22 Trade receivables 66.56 66.47 0.09 The amount as per Sep-22 Trade receivables 100.92 100.43 0.49 quarterly statement Dec-22 Trade receivables 56.59 56.46 0.13 excludes receivables Mar-23 Trade receivables 51.00 49.44 1.57 from related party.

(This space is intentionally left blank) 530Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of SQuAD Forging India Private Limited (continued) Clause (iii)(a) of CARO, 2020 order TheCompanyhasmadeinvestmentsinonecompany.TheCompanyhasnotgrantedsecured/unsecuredloans/advancesinnatureofloans,orstoodguarantee,orprovidedsecuritytoanyparties.Therefore,thereporting underclause3(iii)(a),(iii)(b),(iii)(c),(iii)(d),(iii)(e)and(iii)(f)oftheOrderwithrespecttoloans/advancesinnatureofloansorguaranteesorsecurityprovidedtootherpartiestonotapplicabletotheCompany.The aggregate amount during the year, and balance outstanding at the balance sheet date with respect to such investments to parties other than subsidiaries, joint ventures and associates are as per the table given below:

Particulars Investments (Rs. millions) Aggregate amount invested during the year 0.36 - Others Balance outstanding as at balance sheet date in 0.36 respect of the above case - Others Also refer Note 6(iv) to the financial statements Clause (xvi)(d) of CARO, 2020 order BasedontheinformationandexplanationsprovidedbythemanagementoftheCompany,theGrouphasoneCICaspartoftheGroupasdetailedinnote36(xiv)tothefinancialstatements.Wehavenot,however,separately evaluated whether the information provided by the management is accurate and complete.

Clause (xvii) of CARO, 2020 order The Company has not incurred any cash losses in the financial year and had incurred cash losses of Rs. 34.00 in the immediately preceding financial year.

In the Independent Auditor's Report on Standalone Financial Statements of Aequs Toys Private Limited For the year ended March 31, 2025:

Clause (vii)(a) of CARO, 2020 order UndisputedstatutoryduesincludingGoodsandservicesTax,PF,ESI,incometax,salestax,servicetax,dutyofcustom,dutyofexcise,VAT,cesshavegenerallybeenregularlydepositedwiththeappropriateauthorities though there has been a slight delay in few cases.

Also, refer note 28(b)(ii) to the financial statements regarding management's assessment on certain matters relating to gratuity fund.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses during the financial year of Rs. 112.83 and of Rs. 89.72 in the immediately preceding financial year.

For the year ended March 31, 2024:

Clause (vii)(a) of CARO, 2020 order UndisputedstatutoryduesincludingGoodsandservicesTax,PF,ESI,incometax,salestax,servicetax,dutyofcustom,dutyofexcise,VAT,cesshavegenerallybeenregularlydepositedwiththeappropriateauthorities though there has been a slight delay in few cases Clause (xvii) of CARO, 2020 order The Company has incurred cash losses during the financial year of Rs. 89.72 and of Rs. 88.39 in the immediately preceding financial year.

For the year ended March 31, 2023:

Clause (iii)(a) of CARO, 2020 order TheCompanyhasmadeinvestmentinonecompanyduringtheyear.TheCompanyhasnotgrantedsecured/unsecuredloans/advancesinnatureofloans,orstoodguarantee,orprovidedsecuritytoanyparties.Therefore,the reportingunderclause3(iii),(iii)(a),(iii)(b),(iii)(c),(iii)(d),(iii)(e)and(iii)(f)oftheOrderwithrespecttoloans/advancesinnatureofloansorguaranteesorsecurityprovidedtootherpartiesarenotapplicabletothe Company. The aggregate amount during the year, and balance outstanding at the balance sheet date with respect to such investments is as per the table given below:

Investments Particulars (Amounts in millions) Aggregate amount invested during the year - Subsidiary 194.90 Balance outstanding as a balance sheet date in respect of such investment during the year - Subsidiary 275.00 (Also refer Note 6 (i) to the financial statements) Clause (vii)(a) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandtherecordsoftheCompanyexaminedbyus,inouropinion,theCompanyisgenerallyregularindepositingundisputedstatutoryduesinrespectofprovident fund,professionaltaxandgoodsandservicestax,thoughtherehasbeenaslightdelayinafewcases,andisregularindepositingundisputedstatutorydues,includingemployees'stateinsuranceandincometaxwiththe appropriate authorities.

Clause (xvi)(d) of CARO, 2020 order BasedontheinformationandexplanationsprovidedbythemanagementoftheCompany,theGroup(asdefinedintheCoreInvestmentCompanies(ReserveBank)Directions,2016)hasoneCICaspartoftheGroupas detailed in Note 36 (xiv) to the financial statements. We have not, however, separately evaluated whether the information provided by the management is accurate and complete.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses of Rs. 88.39 in the financial year and of Rs. 5.83 in the immediately preceding financial year.

Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of Koppal Toys Molding COE Private Limited For the year ended March 31, 2025:

Clause (xvii) of CARO, 2020 order The company has incurred cash losses during the financial year of Rs. 18.75 and of Rs. 67.22 in the immediately preceding financial year.

For the year ended March 31, 2024:

Clause (xvii) of CARO, 2020 order The company has incurred cash losses during the financial year of Rs. 67.22 and of Rs. 28.79 in the immediately preceding financial year.

For the year ended March 31, 2023:

Clause (vii)(a) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandtherecordsoftheCompanyexaminedbyus,inouropinion,theCompanyisgenerallyregularindepositingundisputedstatutoryduesinrespectofincometax, thoughtherehasbeenaslightdelayinafewcases,andisregularindepositingundisputedstatutorydues,includingProvidentFund,goodsandservicetaxandothermaterialstatutoryduesasapplicable,withtheappropriate authorities.

Clause (xvi)(d) of CARO, 2020 order BasedontheinformationandexplanationsprovidedbythemanagementoftheCompany,theGroup(asdefinedintheCoreInvestmentCompanies(ReserveBank)Directions,2016)hasoneCICsaspartoftheGroupas detailed in note 32 to the financial statements. We have not, however, separately evaluated whether the information provided by the management is accurate and complete.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses of Rs. 28.79 in the financial year and of Rs. 1.82 in the immediately preceding financial year.

531Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of Aerostructures Assemblies India Private Limited For the year ended March 31, 2025:

Clause (ii)(b) of CARO, 2020 order TheCompanyhasbeensanctionedworkingcapitallimitsinexcessofRs.5Crore,inaggregateduringtheyearfrombanksonthebasisofsecurityofcurrentassets.However,thequarterlyreturns/statementsfiledbythe company with such banks and financial institutions are not in agreement with the books of account of the Company and details of discrepancies are as under Quarter Name of the bank Particulars of the Amount as per Amount as reported in the quarterly Amount of Reason for material securities provided books of accounts return/ statement differences discrepancies (Rs. in millions) (Rs. in millions) (Rs. in millions) Qtr-1 HDFC Bank Stock 198.40 198.00 0.40 Note 1 Qtr-1 HDFC Bank Trade receivables 172.40 170.00 2.40 Note 2 Qtr-2 HDFC Bank Stock 260.20 260.00 0.20 Note 1 Qtr-2 HDFC Bank Trade receivables 121.70 121.00 0.70 Note 2 Qtr-3 HDFC Bank Stock 226.00 241.00 (15.00) Note 1 Qtr-3 HDFC Bank Trade receivables 145.10 129.00 16.10 Note 3 Qtr-4 HDFC Bank Stock 255.50 206.10 49.40 Note 1 Qtr-4 HDFC Bank Trade receivables 133.10 135.00 (1.90) Note 4 Note 1 : This is due to a change in the inventarisation of overheads, which resulted in a revision of the inventory value after submission.

Note 2 : The discrepancies are attributable solely to the conversion of figures from lakhs to millions during the statement submission process, compounded by the absence of decimal precision in the application.

Note 3 : Represents adjustments made post submission of information to the bank.

Note 4 : Represents difference arising from revenue reversal, as goods were in transit and had not yet been delivered to the customer as of the reporting date.

For the year ended March 31, 2024:

Clause (ii)(b) of CARO, 2020 order TheCompanyhasbeensanctionedworkingcapitallimitsinexcessofRs.5Crore,inaggregateduringtheyearfrombanks/financialinstitutionsonthebasisofsecurityofcurrentassets.However,thequarterlyreturns/ statements filed by the company with such banks and financial institutions are not in agreement with the books of account of the Company and details of discrepancies are as under Quarter Name of the bank Particulars of the Amount as per Amount as reported in the quarterly Amount of Reason for material securities provided books of accounts return/ statement differences discrepancies (Rs. in millions) (Rs. in millions) (Rs. in millions) Qtr-1 HDFC Bank Trade receivables 123.10 118.40 4.70 Note 1 Qtr-2 HDFC Bank Stock 233.40 233.30 0.10 Qtr-2 HDFC Bank Trade receivables 131.20 132.40 (1.20)Note 2 Qtr-3 HDFC Bank Trade receivables 150.00 155.40 (5.40)Note 2 Qtr-4 HDFC Bank Stock 212.60 200.60 12.00 Note 3 Qtr-4 HDFC Bank Trade receivables 120.30 122.00 (1.70)Note 2 Note 1 : lntercompany balances excluded while reporting quarterly to the bank and exchange reinstatement adjustment made post submission of information lo the bank.

Note 2 : Exchange reinstatement adjustment made post submission of information to the bank.

Note 3 : Goods in transit have not been included in the stock statements submitted to the bank. (This space is intentionally left blank) 532Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of Aerostructures Assemblies India Private Limited (continued) For the year ended March 31, 2023:

Clause (vii)(a) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandtherecordsoftheCompanyexaminedbyus,inouropinion,theCompanyisregularindepositingundisputedstatutoryduesinrespectofgoodsandservicestax, though there has been a slight delay in a few cases, and is regular in depositing undisputed statutory dues including provident fund, employees' state insurance, income tax, duty of customs and other material statutory dues, as applicable, with the appropriate authorities.

The extent of the arrears of statutory dues outstanding as at March 31, 2023, for a period of more than six months from the date they became payable are as follows:

Name of the Nature of dues Amount Period to which the Due date Date of payment Remarks, if any statute (Rs. in millions) amount relates Goods and Goods and service tax 0.01 FY 2021-22 Various Not yet paid - service tax Also, refer Note 28(ii) to the financial statements regarding management's assessment on certain matters relating to provident fund.

Clause (xvi)(d) of CARO, 2020 order BasedontheinformationandexplanationsprovidedbythemanagementoftheCompany,theGroup(asdefinedintheCoreInvestmentCompanies(ReserveBank)Directions,2016)hasoneCICaspartoftheGroupas detailed in Note 36(xii) to the financial statements. We have not, however, separately evaluated whether the information provided by the management is accurate and complete.

In the Independent Auditor's Report on Standalone Financial Statements of Aequs Home Appliances Private Limited For the year ended March 31, 2025:

Clause (vii)(a) of CARO, 2020 order UndisputedstatutoryduesincludingduesincludingGoodsandServicesTax,PF,ESI,incometax,sales-tax,servicetax,dutyofcustom,dutyofexcise,VAT,cesshavegenerallybeenregularlydepositedwiththe appropriate authorities though there has been a slight delay in few cases.

Clause (xvii) of CARO, 2020 order The company did not incur any cash losses during FY 24-25, however cash losses for the immediately preceeding financial year was Rs. 0.13 million.

For the year ended March 31, 2024:

Clause (vii)(a) of CARO, 2020 order UndisputedstatutoryduesincludingduesincludingGoodsandServicesTax,PF,ESI,income-tax,sales-tax,servicetax,dutyofcustom,dutyofexcise,VAT,cesshavegenerallybeenregularlydepositedwiththe appropriate authorities though there has been a slight delay in a few cases .

Clause (xvii) of CARO, 2020 order The company has incurred cash losses of Rs. 0.13 during the financial year covered by our audit and Rs. 4.45 in the immediately preceding financial year., In the Independent Auditor's Report on Standalone Financial Statements of Koppal Toys Tooling COE Private Limited For the year ended March 31, 2023:

Clause (iii)(a) of CARO, 2020 order TheCompanyhasgrantedunsecuredloanstoafellowsubsidiary.Theaggregateamountduringtheyear,andbalanceoutstandingatthebalancesheetdatewithrespecttosuchloanstoassociatesareasperthetablegiven

below:

Advance in the Guarantees Loans (Amounts in nature of loans Particulars (Amounts in Security (Amounts in millions) millions) (Amounts in millions) millions) Aggregate amount invested during the year - Fellow Subsidiary - - 21.00 - - Joint ventures - Associates - Others Balance outstanding as a balance sheet date in respect of such - - - - investment during the year - Fellow Subsidiary - Joint ventures - Associates - Others (Also refer Note 17 to the financial statements) Clause (iii)(f) of CARO, 2020 order Following loans were granted during the year, including to related parties under Section 2(76), which are repayable on demand.

Particulars All parties Promoters Related parties (Amounts in millions) Aggregate of loans/ advances in nature of loan - Repayable on demand - - 21.00 - Agreement does not specify any terms or period of repayment Percentage of loans/advances in nature of loan to the total loans - - 100% (Also refer Note 17 to the financial statements) 533Aequs Limited (formerly known as Aequs Private Limited) CIN: U80302KA2000PLC026760 Annexure VI - Statement of Restated Adjustments to the Audited Consolidated Financial Information (All amounts are in INR Millions, except share data, unless otherwise stated) Part B -Non adjusting events (continued) In the Independent Auditor's Report on Standalone Financial Statements of Koppal Toys Tooling COE Private Limited (continued) For the year ended March 31, 2023 (continued):

Clause (vii)(a) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandtherecordsoftheCompanyexaminedbyus,inouropinion,theCompanyisgenerallyregularindepositingundisputedstatutoryduesinrespectofIncometax thoughtherehasbeenaslightdelayinafewcases,andisregularindepositingundisputedstatutorydues,includingprovidentfund,goodsandservicestaxandothermaterialstatutoryduesasapplicable,withtheappropriate authorities.

Clause (xvi)(d) of CARO, 2020 order BasedontheinformationandexplanationsprovidedbythemanagementoftheCompany,theGroup(asdefinedintheCoreInvestmentCompanies(ReserveBank)Directions,2016)hasoneCICsaspartoftheGroupas detailed in note 29 to the financial statements. We have not, however, separately evaluated whether the information provided by the management is accurate and complete.

Clause (xvii) of CARO, 2020 order The Company has incurred cash losses of Rs. 3.47 in the financial year and of Rs. 0.78 in the immediately preceding financial year.

In the Independent Auditor's Report on Standalone Financial Statements of Aerospace Processing India Private Limited For the year ended March 31, 2023:

Clause (vii)(a) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandtherecordsoftheCompany,examinedbyus,inouropinion,theCompanyisgenerallyregularindepositingundisputedstatutoryduesinrespectofprofessional tax,thoughtherehasbeenaslightdelayinafewcases,andisregularindepositingundisputedstatutorydues,includingprovidentfund,employees'stateinsurance,incometax,dutyofcustoms,GoodsandServicesTax,and othermaterialstatutorydues,asapplicable,withtheappropriateauthorities.Also,refernote29(a)(ii)tothefinancialstatementsregardingmanagament'sassessmentoncertainmattersrelatingtoprovidentfund.Theextentof the arrears of statutory dues outstanding as at March 31, 2023, for a period of more than six months from the date they became payable are as follows:

Name of the Nature of dues Amount Period to which the Due date Date of payment Remarks, if any statute (Rs. in millions) amount relates Goods and Goods and Services Tax 0.01 FY 2021-22 Various Not yet paid - Services Tax Act Clause (vii)(b) of CARO, 2020 order AccordingtotheinformationandexplanationsgiventousandtherecordsoftheCompanyexaminedbyus,therearenostatutoryduesofprovidentfund,employees'stateinsurance,professionaltax,goodsandservicestax, dutyofcustoms,whichhavenotbeendepositedonaccountofanydispute.Theparticularsofotherstatutoryduesreferredtoinsub-clause(a)asatMarch31,2023whichhavenotbeendepositedonaccountofadispute,are

as follows:

Name of the Nature of dues Amount (Rs. in Period to which the amount relates Forum where the dispute is pending statute millions) (Financial Year) Income Tax Act, Income Tax 0.31 2017-18 Assessing Officer 1961 0.97 2019-20 Commissioner of Income-tax (Appeals) Clause (xvi)(d) of CARO, 2020 order BasedontheinformationandexplanationprovidedbythemanagementoftheCompany,theGroup(asdefinedintheCoreInvestmentCompanies(ReserveBank),Directions,2016)hasoneCIC'saspartoftheGroupas detailed in note 37(xiv) to the financial statements. We have not, however, separately evaluated whether the information provided by the management is accurate and complete.

Part C - Material regroupings:

Exceptthere-groupingsdisclosedinAccountingpolicyonEBITDA,therearenoothermaterialre-groupingsmadeintherestatedconsolidatedstatementofassetsandliabilities,restatedconsolidatedstatementofprofitand loss,restatedconsolidatedstatementofchangesinequityandrestatedconsolidatedstatementofcashflows,whereverrequired,byreclassificationofthecorrespondingitemsofincome,expenses,assets,liabilitiesandcash flows,fortheyearsendedMarch31,2025,March31,2024andMarch31,2023inordertobringtheminlinewiththeaccountingpoliciesandclassificationaspertherestatedconsolidatedfinancialinformationoftheGroup, itsassociateanditsjointventuresforyearendedendedMarch31,2025respectivelypreparedinaccordancewithScheduleIIIofCompaniesAct,2013,requirementsofIndAS1andotherapplicableIndASprinciplesand the requirements of the Securities and Exchange Board of India (Issue of Capital & Disclosure Requirements) Regulations, 2018, as amended.

Part D - Other changes:

Operating Segments DuringtheyearendedMarch31,2024,theGrouprestructureditsinternalreportingframeworktoalignwithrevisedbusinessverticalsforimprovedperformancetrackingandresourceallocation.Asaresult,theGroup identifiedtworeportablesegmentsi.e.,AerospaceandConsumer,comparedtoasinglereportablesegmenti.e.,ContractManufacturinginthepreviousfinancialyears.Consequently,theGroupupdateditsoperatingsegment disclosurestoreflectthisnewinternalreportingstructure.InaccordancewithIndAS108,managementhasrestatedthesegmentinformationforthecorrespondingpreviousfinancialyearstoensureconsistencyand comparability.

As per our report of even date attached. for B S R & Co. LLP for and on behalf of the Board of Directors of Chartered Accountants Aequs Limited (formerly known as Aequs Private Limited) ICAI Firm's Registration No. 101248W/W-100022 CIN: U80302KA2000PLC026760 Sampad Guha Thakurta Rajeev Kaul Aravind S. Melligeri Partner Managing Director Executive Chairman and Chief Executive Officer Membership No.: 060573 DIN-01468590 DIN-00787735

Place: Chennai Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 Date: November 14, 2025 Dinesh Iyer Ravi Mallikarjun Hugar Chief Financial Officer Company Secretary M. No. - A20823

Place: Belagavi Place: Belagavi

Date: November 14, 2025 Date: November 14, 2025 534OTHER FINANCIAL INFORMATION The audited standalone financial statements of (i) our Company; and (ii) our Material Subsidiaries, as at and for the financial years ended March 31, 2025, March 31, 2024, and March 31, 2023 (“Standalone Financial Statements”) are available on the website of our Company at www.aequs.com/investor/. Our Company has

provided a link to such website solely to comply with the requirements specified in the SEBI ICDR Regulations.

The Standalone Financial Statements and the reports thereon, do not and will not constitute, (i) a part of the Red Herring Prospectus, or (ii) this Prospectus, a statement in lieu of a prospectus, an offering circular, an offering memorandum, an advertisement, an offer or a solicitation of any offer or an offer document to purchase or sell any securities under the Companies Act 2013, the SEBI ICDR Regulations, or any other applicable law in India or elsewhere in the world. The Standalone Financial Statements and the reports thereon, should not be considered as part of information that any investor should consider to subscribe for or purchase any securities of our Company, or any entity in which it or its shareholders have significant influence (collectively, the “Group”) and should not be relied upon or used as a basis for any investment decision. Due caution is advised when accessing and placing reliance on any historic or other information available in the public domain. None of its advisors, nor any Book Running Lead Managers nor any of their respective employees, directors, affiliates, agents or representatives, accept any liability whatsoever for any loss, direct or indirect, arising from any information presented or contained in the Standalone Financial Statements, or the opinions expressed therein.

The accounting ratios required under Clause 11 of Part A of Schedule VI of the SEBI ICDR Regulations are given

below:

As at and for the six months period ended As at and for the Fiscal ended Particulars September 30, September March 31, March 31, 2024 March 31, 2023 2025* 30, 2024* 2025 Earnings per equity share (0.30) (1.26) (1.80) (0.20) (2.44) for profit from discontinued & continuing operation attributable to owners of Aequs Limited (formerly known as Aequs Private Limited) (Basic and Diluted in INR) (Nominal value per share – ₹ 10) EBITDA(1) 841.06 578.22 1,079.69 1,455.10 630.56 Net Worth(2) (in ₹ million) 7,960.35 7,316.54 7,075.25 8,071.67 2,519.14 Return on Net Worth(3) (%) (2.13) (9.80) (14.47) (1.76) (43.47) Net Asset Value per Equity 13.60 12.89 12.47

14.82 6.21 Share(4) (in ₹) *Not annualised

Notes:

(1) We calculate EBITDA as Loss for the year/period as per restated consolidated statement of profit and loss plus (i) Total tax expenses; (ii) finance costs; and (iii) depreciation and amortisation expense adjusted for (iv) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; (v) exceptional items gain/(loss); and (vi) (Loss) / profit from discontinued operations before tax. For details in relation to reconciliation of Non-GAAP financial measures, see “-Reconciliation of Non-GAAP Measures” on page 535.

(2) Net Worth, as per Regulation 2(1)(hh) of the SEBI ICDR Regulations, means the aggregate value of the paid-up share capital and all reserves created out of the profits and securities premium account and debit or credit balance of profit and loss account, after deducting the aggregate value of the accumulated losses, deferred expenditure and miscellaneous expenditure not written off, as per the restated statement of assets and liabilities, but does not include reserves created out of revaluation of assets, write-back of depreciation and amalgamation. Further, Net Worth is calculated by deducting the revaluation reserve and common control capital reserve from the equity attributable to owners of the Company. Equity attributable to owners of the Company comprises of equity share capital, instruments entirely equity in nature and other equity. For details in relation to reconciliation of Non-GAAP financial measures, see “-Reconciliation of Non-GAAP Measures” on page 535.

(3) Return on Net Worth (%) is calculated as Loss for the year/period divided by the net worth as at the end of the year/period. For details in relation to reconciliation of Non-GAAP financial measures, see “-Reconciliation of Non-GAAP Measures” on page 535.

(4) Net Asset Value per Equity Share represents Net Worth as at the end of the year/period divided by weighted average number of Equity Shares considered for calculating basic and diluted EPS for the year/period. For details in relation to reconciliation of Non-GAAP financial measures, see “-Reconciliation of Non-GAAP Measures” on page 535.

Reconciliation of Non-GAAP Financial Measures Reconciliation for the following Non-GAAP Financial Measures included in this Prospectus are set out below:

5351. Reconciliation of Net Worth and Return on Net Worth (in ₹ million) For the six months period ended For the year ended Particulars September 30, September 30, March March March 2025* 2024* 31, 2025 31, 2024 31, 2023 Equity share capital (A) 6,050.02 4,247.59 5,818.29 4,247.59 4,247.58 Instruments entirely equity in nature (B) - 4,071.16 - 4,071.16 - Other equity (C) 2,004.27 (908.27) 1,350.90 (153.14) (1,461.50) Equity attributable to owners of the 8,054.29 7,410.48 7,169.19 8,165.61 2,786.08 Company (D= A+B+C)

Less: Revaluation reserve (E) - - - - (173.00)

Less: Common control capital reserve (F) (93.94) (93.94) (93.94) (93.94) (93.94) Net Worth (G=D-E-F) 7,960.35 7,316.54 7,075.25 8,071.67 2,519.14 Loss for the period/ year (H) (169.77) (717.00) (1,023.46) (142.44) (1,094.95) Return on Net Worth (%) (I= H/G) (2.13%) (9.80%) (14.47%) (1.76%) (43.47%) *Not annualised

Notes:

(1) Net Worth, as per Regulation 2(1)(hh) of the SEBI ICDR Regulations, means the aggregate value of the paid-up share capital and all reserves created out of the profits and securities premium account and debit or credit balance of profit and loss account, after deducting the aggregate value of the accumulated losses, deferred expenditure and miscellaneous expenditure not written off, as per the restated statement of assets and liabilities, but does not include reserves created out of revaluation of assets, write-back of depreciation and amalgamation. Further, Net Worth is calculated by deducting the revaluation reserve and common control capital reserve from the equity attributable to owners of the Company. Equity attributable to owners of the Company comprises of equity share capital, instruments entirely equity in nature and other equity.

(2) Return on Net Worth (%) is calculated as Loss for the year divided by the net worth as at the end of the year/period.

2. Reconciliation of Net Asset Value per Equity Share For the six months period ended For the year ended Particulars September 30, September 30, 2024* March 31, March 31, March 31, 2025* 2025 2024 2023 Net Worth (A) (in ₹ 7,960.35 7,316.54 7,075.25 8,071.67 2,519.14 million) Weighted average 585,143,598 567,428,940 567,485,326 number of Equity shares 544,522,820 405,347,665 in calculating basic and diluted EPS (B) Net Asset Value per 13.60 12.89 12.47 Equity Share (C=A/B) 14.82 6.21 (in ₹) *Not annualised

Notes:

(1) Net asset value per Equity Share represents Net Worth as at the end of the year/period divided by weighted average number of Equity Shares considered for calculating basic and diluted EPS for the year/period.

(2) Weighted average number of Equity Shares is the number of Equity Shares outstanding at the beginning of the year/period and weighted average number of compulsorily convertible preference shares adjusted by the number of Equity Shares issued during the year/period, excluding treasury shares multiplied by the time-weighting factor.

3. Reconciliation of EBITDA and EBITDA Margin% (in ₹ million, unless stated otherwise) For the six months period ended For the year ended Particulars September 30, 2025* September 30, 2024* March March March 31, 2025 31, 2024 31, 2023 Loss for the year (A) (169.77) (717.00) (1,023.46) (142.44) (1,094.95)

Add: Total tax expense 112.67 57.05

83.40 99.66 60.49

(B)

Add: Finance costs (C) 357.51 278.59 589.01 638.06 646.07

Add: Depreciation and 571.55 529.20 amortisation expense 1,034.06 1,076.85 995.16

(D)

Less: Share of net 33.83 53.16 profit/(loss) of

85.24 51.52 (8.74) associate and joint ventures accounted for 536For the six months period ended For the year ended Particulars September 30, 2025* September 30, 2024* March March March 31, 2025 31, 2024 31, 2023 using the equity method, net of tax (E)

Less: Exceptional - (482.65) (482.65) 186.48 (7.36) items gain / (loss) (F)

Less: (Loss) / profit (2.93) (0.89) from discontinued

0.73 (20.97) (7.69) operations before tax

(G) Earnings from 841.06 578.22 continuing operations before finance cost, depreciation and amortisation, share 1,079.69 1,455.10 630.56 of profit/(loss) of associate and joint ventures, exceptional items and tax (H=A+B+C+D-E-F- G) Revenue from 5371.59 4589.73 9,246.06 9,650.74 8,121.32 operations (I) EBITDA Margin % 15.66% 12.60%

11.68% 15.08% 7.76% (J=H/I) *Not annualised

Notes:

(1) We calculate EBITDA as Loss for the year/period as per restated consolidated statement of profit and loss plus (i) Total tax expenses;

(ii) finance costs; and (iii) depreciation and amortisation expense adjusted for (iv) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; (v) exceptional items gain/(loss); and (vi) (Loss) / profit from discontinued operations before tax.

(2) EBITDA Margin is calculated as EBITDA as a percentage of revenue from operations.

4. Reconciliation of EBITDA and EBITDA – Aerospace Segment Margin % (in ₹ million, unless stated otherwise) For the six months period ended For the year ended Particulars September 30, 2025* September 30, 2024* March March March 31, 2025 31, 2024 31, 2023 Profit / (Loss) before tax 688.19 454.33

711.66 978.09 319.97

(A)

Add: Finance costs (B) 246.71 170.05 387.75 388.10 483.43

Add: Depreciation and 311.66 301.26

611.40 615.54 598.74 amortisation expense (C)

Less: Share of net 76.95 53.16 profit/(loss) of associate and joint ventures

113.06 51.52 (8.74) accounted for using the equity method, net of tax

(D)

Less: Exceptional items - - 0 186.48 577.29 gain / (loss) (E) Segment results (F= 1,169.61 872.48 1,597.75 1,743.73 833.59 A+B+C-D-E) EBITDA - Aerospace 1,169.61 872.48 Segment 1,597.75 1,743.73 833.59 (G=F) Net external revenue – 4,739.53 3,947.23 8,246.41 7,569.78 5,851.82 Aerospace Segment (H) EBITDA - Aerospace 24.68% 22.10% Segment Margin % 19.38% 23.04% 14.24% (I=G/H) *Not annualised

Notes:

537(1) We calculate EBITDA - Aerospace Segment as Profit / (Loss) before tax for the year/period for Aerospace Segment plus (i) finance costs; and (ii) depreciation and amortisation expense adjusted for (iii) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; and (iv) Exceptional items gain/(loss); of the Aerospace segment as per the Segment Reporting in the Restated Consolidated Financial Information.

(2) EBITDA - Aerospace Segment Margin %: EBITDA - Aerospace Segment as a percentage of Net external revenue of the Aerospace segment as per the segment reporting in the Restated Consolidated Financial Information.

(3) Total tax expense is not identified at a segment level by management and hence is considered as unallocated in its segment information presented in the Restated Consolidated Financial Information.

5. Reconciliation of EBITDA and EBITDA - Consumer Segment Margin % (in ₹ million, unless stated otherwise) For the six months period For the year ended ended Particulars September September March 31, March 31, March 31, 30, 2025* 30, 2024* 2025 2024 2023 Profit / (Loss) before tax (A) (626.51) (1,023.88) (1,458.54) (973.67) (721.57)

Add: Finance costs (B) 172.40 122.47 238.70 357.86 228.64

Add: Depreciation and 259.89 227.94

422.66 460.13 349.56 amortisation expense (C)

Less: Share of net profit/(loss) of (43.12) - associate and joint ventures (27.82) - - accounted for using the equity method, net of tax (D)

Less: Exceptional items gain / - (482.65) (482.65) - -

(loss) (E) Segment results (F= A+B+C- (151.10) (190.82) (286.71) (155.68) (155.50) D-E) EBITDA – Consumer Segment (151.10) (190.82) (286.71) (155.68) (155.50) (G=F) Net external revenue – 632.06 642.50

999.65 2,080.96 2,269.50 Consumer Segment (H) EBITDA - Consumer Segment (23.91%) (29.70%) (28.68%) (7.48%) (6.85%) Margin % (I=G/H) *Not annualised

Notes:

(1) We calculate EBITDA - Consumer Segment as Profit / (Loss) for the year/period before tax for Consumer Segment plus (i) finance costs; and (ii) depreciation and amortisation expense adjusted for (iii) Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax; and (iv) exceptional items gain/(loss); of the Consumer segment as per the segment reporting in the Restated Consolidated Financial Information.

(2) EBITDA - Consumer Segment Margin %: EBITDA - Consumer Segment as a percentage of Net external revenue of the Consumer segment as per the segment reporting in the Restated Consolidated Financial Information.

(3) Total tax expense is not identified at a segment level by management and hence is considered as unallocated in its segment information presented in the Restated Consolidated Financial Information.

6. Reconciliation of PAT Margin (in ₹ million, unless stated otherwise) For the six months period ended For the year ended Particulars September 30, 2025* September 30, 2024* March March March 31, 2025 31, 2024 31, 2023 Loss for the period/ year (A) (169.77) (717.00) (1,023.46) (142.44) (1,094.95) Revenue from operations (B) 5,371.59 4,589.73 9,246.06 9,650.74 8,121.32 PAT margin (C=A/B) (3.16%) (15.62%) (11.07%) (1.48%) (13.48%) *Not annualised

Notes:

(1) PAT Margin is calculated as loss for the year/period as a percentage of revenue from operations.

538MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS You should read the following discussion of our financial condition and results of operations in conjunction with our Restated Consolidated Financial Information included in this Prospectus as of and for the six months period ended September 30, 2025 and 2024, and the Financial Years 2025, 2024 and 2023, including the related notes, schedules and annexures beginning on page 383. Our Restated Consolidated Financial Information has been prepared in accordance with Ind AS, Section 26 of the Companies Act, the SEBI ICDR Regulations and the Guidance Note. Ind AS differs in certain material respects from IFRS and U.S. GAAP. See “Risk Factors – External Risk Factors – Risks related to India – Significant differences exist between the Indian Accounting Standards used to prepare our financial information and other accounting principles, such as the United States Generally Accepted Accounting Principles and the International Financial Reporting Standards, which may affect investors’ assessments of our financial condition” on page 91.

This discussion contains certain forward-looking statements that involve risks and uncertainties and reflect our current view with respect to future events and financial performance, many of which are beyond our control, which may cause the actual results to be different from those expressed or implied by the forward-looking statements. See “Forward-Looking Statements” and “Risk Factors” on pages 36 and 37, respectively.

We have included certain non-GAAP financial measures and other performance indicators relating to our financial performance and business in this Prospectus, each of which is a supplemental measure of our performance and liquidity and not required by, or presented in accordance with, Ind AS, IFRS or U.S. GAAP.

Furthermore, such measures and indicators are not defined under Ind AS, IFRS, U.S. GAAP or other accounting standards, and therefore should not be viewed as substitutes for performance, liquidity, or profitability measures under such accounting standards. In addition, such measures, and indicators are not standardized terms and a direct comparison of these measures and indicators between companies may not be possible. Other companies may calculate these measures and indicators differently from us, limiting their usefulness as a comparative measure. Although such measures and indicators are not a measure of performance calculated in accordance with applicable accounting standards, our management believes that they are useful to an investor in evaluating our operating performance.

Unless otherwise indicated, industry and market-related data used in this section have been derived from the report titled “An Assessment of Aerospace and Consumer PEC Industry” dated November 14, 2025 (the “F&S Report”), prepared and released by Frost & Sullivan (India) Private Limited (“F&S”), which has been exclusively paid for and commissioned by our Company pursuant to an engagement letter dated December 10, 2024, as supplemented by a subsequent engagement letter dated September 8, 2025, for the purpose of confirming our understanding of the industry we operate in, in connection with the Offer, as no report is publicly available which provides a comprehensive industry analysis, particularly for our Company’s services. The F&S Report was available on the website of our Company from the date of filing of the Red Herring Prospectus at www.aequs.com/investor/ until the Bid/Offer Closing Date and has also been included in “Material Contracts and Documents for Inspection – Material Documents” on page 682. The industry and market-related data included herein includes excerpts from the F&S Report and may have been re-ordered by us for the purposes of presentation. There are no material parts, data or information (which may be relevant for the Offer), that has been left out or changed in any manner. See “Certain Conventions, Use of Financial Information and Market Data and Currency of Presentation – Industry and Market Data” and “Risk Factors — Internal Risk Factors — This Prospectus contains information from third parties, including an industry report prepared by an independent third-party research agency, Frost & Sullivan (India) Private Limited, which we have commissioned and paid for purposes of confirming our understanding of the industry exclusively in connection with the Offer.” on pages 32 and 85, respectively.

Our Company’s financial year commences on April 1 and ends on March 31 of the immediately subsequent year.

Unless otherwise indicated or the context otherwise requires, the financial information included herein is derived from the Restated Consolidated Financial Information included in this Prospectus.

Overview We are the only precision component manufacturer operating within a single special economic zone in India to offer fully vertically integrated manufacturing capabilities in the Aerospace Segment, which sets us apart from other contract manufacturers with selective manufacturing capabilities amongst our peers (Source: F&S Report, see “Industry Overview”, para 4 on page 238). Precision components are precisely machined parts that are 539designed and manufactured to exact specifications and are commonly supplied to OEM customers and system integrators. We had one of the largest portfolios of aerospace products in India, as of March 31, 2025 (Source:

F&S Report, see “Industry Overview”, para 2 on page 246). Our diverse product portfolio includes components for engine systems, landing systems, cargo and interiors, structures, assemblies and turning for our aerospace clients. For the six months period ended September 30, 2025 and the Financial Year 2025, our net external revenue from the Aerospace Segment was ₹4,739.53 million and ₹8,246.41 million, respectively.

Our advanced manufacturing capabilities also enable us to enter into new business segments by leveraging existing capabilities. While we primarily operate in the Aerospace Segment, over the years, we have expanded our product portfolio to include consumer electronics, plastics, and consumer durables for our consumer clients. Our diverse consumer product portfolio includes consumer durables such as cookware and small home appliances, plastics such as outdoor toys, figurines, toy vehicles and components for consumer electronics such as portable computers and smart devices.

We are one of the few manufacturers in India with niche metallurgy capabilities, specializing in precision machining of high-end alloys, including titanium alloys for our aerospace clients (Source: F&S Report, see “Industry Overview”, para 8 on page 235). Further, we are the leading company within a single special economic zone in terms of end-to-end manufacturing capabilities (machining, forging, surface treatment and assembly) for the Aerospace Segment in India, based on the number of capabilities and approvals (Source: F&S Report, see “Industry Overview”, para 2 on page 236).

We operate in three unique, engineering-led vertically integrated precision manufacturing “ecosystems” in India (Source: F&S Report, see “Industry Overview”, para 4 on page 238). These manufacturing ecosystems comprise our Company, few of our suppliers and our Joint Ventures, which allow us to manufacture products in accordance with our clients’ specifications. Global aerospace companies, such as Airbus and Boeing are focused on enhancing their supply chain efficiency and accordingly, prefer suppliers who are able to offer “one-stop-shop” capabilities to support their complex manufacturing and integration needs, due to the benefits associated with quality management, cost and working capital efficiencies (for instance, on account of reduced logistics and warehousing costs as a result of co-located facilities), reduced lead times and reduced global carbon footprint (Source: F&S Report, see “Industry Overview”, para 2 on page 236). Our manufacturing ecosystems enable large-scale, timely production of complex products, meeting global OEMs’ stringent requirements in both Aerospace Segment and Consumer Segment. In recent years, we have strategically prioritized the selective outsourcing of lower value- added activities, including 3-axis and 4-axis machining, within and outside our manufacturing ecosystem to third- party subcontractors, allowing us to concentrate on producing more complex and higher value components through higher value-added activities, including 5-axis machining. While we continue to maintain our capacity in 3-axis and 4-axis machining, our focus going forward is on expanding our capabilities in 5-axis machining, as we move up the value chain. Further, we aim to leverage our existing aerospace manufacturing capabilities to diversify customer base in Aerospace Segment by pursuing opportunities to develop new relationships and strengthening our presence in the Aerospace Segment.

As of September 30, 2025, we produced over 5,000 products within the Aerospace Segment under a variety of manufacturing and assembly programs established with our aerospace customers, including programs for single aisle (such as A220, A320, B737) and long range (A330, A350, B777, B787) commercial aircrafts. We had one of the largest portfolios of aerospace products in India, as of March 31, 2025 (Source: F&S Report, see “Industry Overview”, para 2 on page 246). The combination of our scale, vertically integrated manufacturing ecosystems and qualified engineering talent enables us to scale production while meeting contracted timelines with stringent quality and safety standards. This has also allowed us to achieve 100% in-country value addition for select products. We perform our own quality checks on suppliers, by regularly monitoring and ensuring that the raw materials supplied to us meet our and our customers’ stringent quality standards, which in turn provides us with an ability to have better control over our quality and increase our competitive ability. Our Company has instituted a quality assurance framework to ensure that all materials and products meet both international standards and those of our customers. We conduct quality checks on suppliers, sourcing raw materials exclusively from approved and qualified vendors. Each manufacturing facility is supported by a dedicated quality assurance team that conduct thorough inspections at all stages of production, from raw material intake to final output. Our manufacturing facilities within our manufacturing clusters hold multiple internationally recognized certifications such as ISO 9001:2015, AS9100D, and NADCAP. Our quality control infrastructure, including inspection equipment such as coordinate measuring machines, optical measuring machines and non-destructive testing equipment, supports precise validation of product specifications. In addition, our manufacturing facilities are periodically inspected and audited by regulatory authorities and customers.

We commenced manufacturing of aero-structure components and aero-engine components, for aerospace clients 540in our units in the Belagavi Manufacturing Cluster in 2009. Over the past 15 years, we have consistently grown our business by developing and acquiring new manufacturing capabilities, and diversifying our product portfolio and customer base across the Aerospace Segment and Consumer Segment. We strategically expanded our manufacturing operations in North America and France, through acquisitions in 2015 and 2016, respectively, which have allowed us to acquire new capabilities in the Aerospace Segment, grow our footprint in North America and Europe, and expand our portfolio of products.

We leverage our engineering capabilities to create innovative products and engineering solutions for our OEM customers. Our manufacturing capabilities allow us to develop fully manufactured products based on initial concepts and technical specifications from customers. Further, we have been able to enter into new business segments by leveraging existing core capabilities. As a platform for custom manufacturing based on specific client requirements, we are committed to developing innovative manufacturing processes while continuously improving existing ones to produce high-quality and reliable products in an efficient manner.

We have also entered into joint ventures to enhance our capabilities to develop new products and deliver engineering solutions, by harnessing the complementary expertise of our joint venture entities for production of complex and niche products required by our customers. Our joint venture SQuAD Forging India Private Limited (“SQuAD”), has equipped us with enhanced capabilities to, among others, forge small to medium-sized aero- structural parts for engines, landing gear and braking system components in aluminium, steel, titanium or nickel- based alloys. Further, our joint venture with Magellan Aerospace Limited, Canada formed in 2007, Aerospace Processing India Private Limited (“API”), has enabled us to provide innovative surface treatment solutions.

Further, our joint venture with Tramontina, Aequs Cookware Private Limited equips us with technical capabilities to develop innovative consumer products. However, our existing joint ventures may be discontinued in the future, and our future joint ventures expose us to other potential risks, including risks associated with unforeseen or hidden liabilities, sharing proprietary information, among others. For details, see “Risk Factors – Any difficulties in identifying, consummating and integrating acquisitions, investments or alliances or undertaking any internal restructuring may expose us to potential risks and have an adverse effect on our business, results of operations, financial condition and cash flows” on page 76.

We operate within precision manufacturing vertical for electronic components which is specifically notified as eligible sectors under various Production Linked Incentive (“PLI”) schemes promulgated by the Government of India as well as corollary incentive frameworks introduced by several State Governments. In furtherance of our growth plan and with a view to enhancing domestic value addition, backward integration and import substitution, our Company intends to participate in and secure incentives available under (i) the Scheme for Promotion of Manufacturing of Electronic Components and Semiconductors for establishing and expanding its electronics manufacturing services line for precision sensor modules and control units, and (ii) complementary State-level capital subsidy, interest subsidy, stamp duty exemption, electricity duty exemption and SGST reimbursement programmes, thereby optimising its capital expenditure structure, accelerating capacity expansion and reinforcing its competitive cost position. By systematically leveraging these initiatives, each designed to reward incremental sales, promote scale, foster technological innovation and cultivate globally competitive manufacturing capabilities, our Company expects to enhance its return on invested capital, diversify its customer base, deepen localisation of its supply chain and fortify its status as a preferred partner to original equipment manufacturers.

Since the commencement of our operations, we have cultivated long-standing relationships with customers, including marquee global OEM customers across the aerospace and consumer industries, and we have over the years established ourselves as key global suppliers for such customers. Our key clients include Airbus, Boeing, Bombardier, Collins Aerospace, Spirit Aerosystems Inc, Safran, GKN Aerospace, Mubea Aerostructures, Honeywell, Eaton and Sabca in the Aerospace Segment, and, Hasbro, Spinmaster, Wonderchef, and Tramontina in the Consumer Segment.

Due to the collaborative nature of the manufacturing which we undertake along with our OEM customers, who have very specific product requirements and stringent quality standards, we have been able to maintain high levels of client stickiness and retention. Our deep understanding of our OEM customers’ requirements allows us to continuously innovate and upgrade our capabilities in order to develop complex products with quick turnaround times. Extensive testing and validation processes required to fulfil very specific product requirements and stringent quality requirements by aerospace OEM customers create a significant barrier to entry for new market entrants (Source: F&S Report, see “Industry Overview”, para 8 on page 235). Once a contract is awarded by an OEM, significant amount of time is spent on design, manufacturing and first article inspection of the product. Onboarding a new supplier will make the OEM undergo the same processes and this is why OEMs are often reluctant to switch suppliers. We have won the ‘Ramp-up Champion Award’ for outstanding contribution to the Airbus ramp-up at the Airbus Global Supplier Conference 2024. This recognition rewards operational excellence and resilience in a 541volatile, uncertain, complex, and ambiguous (VUCA) environment, and is a testament to our ability to manufacture complex and critical components while consistently delivering quality and on-time performance for our clients.

We are led by our Individual Promoter, Executive Chairman and Chief Executive Officer, Aravind Shivaputrappa Melligeri, who provides strategic vision and leadership to the Aequs group. Further, we also benefit from a seasoned management team with significant industry experience. Further, we are also backed by our investors, Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II, Amansa Investments Ltd, Steadview Capital Mauritius Limited, Catamaran Ekam (acting through its trustee Catamaran Advisors LLP), Sparta Group LLC, SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term and Think India Opportunities Master Fund LP which collectively hold 25.05% of our pre-Offer Equity Share capital.

Significant Factors Affecting our Results Of Operations Our customer relationships and growth of business from customers We have established relationships with customers, including marquee global OEM customers across the aerospace and consumer industries, and we have over the years established ourselves as key multi-national suppliers for such customers. Our ten largest customer groups collectively accounted for 82.51%, 85.56%, 88.57%, 86.51% and

86.48% of our revenue from operations for the six months period ended September 30, 2025 and 2024, and the Financial Years 2025, 2024 and 2023 respectively. Our established relationships with our large customer groups provide us with predictability of revenues, and our results of operations would depend on our ability to grow our relationships with such customers. For details, see “Risk Factors – We are dependent on our ten largest customer groups, which comprise a significant portion of our revenue from operations (82.51% for the six months period ended September 30, 2025, 85.56% for the six months period ended September 30, 2024, 88.57% for the Financial Year 2025, 86.51% for the Financial Year 2024 and 86.48% for the Financial Year 2023). Any failure to maintain our relationship with these customer groups or any adverse changes affecting their financial condition will have an adverse effect on our business, results of operations, financial condition and cash flows.” on page 38.

Accordingly, our revenue from operations and financial performance will depend on the performance of our large customers groups and the demand for their products in their respective end-markets, as well as our ability to meet such customers’ quality, cost and delivery requirements. Due to the collaborative nature of the manufacturing which we undertake along with our OEM customers, who have very specific product requirements and stringent quality requirements, we have been able to maintain high levels of client stickiness and retention. Our understanding of our OEM customers’ requirements allow us to continuously innovate and upgrade our capabilities in order to develop complex products with quick turnaround times. Extensive testing and validation processes required to fulfil very specific product requirements and stringent quality requirements by aerospace OEM customers create a significant barrier to entry for new market entrants (Source: F&S Report, see “Industry Overview”, para 8 on page 235). Thus, our customized capabilities, developed in close coordination with our customers and supported by our geographic presence across India, the United States and France, positions us favorably to cater to global OEM customers in the Aerospace Segment and Consumer Segment.

Moreover, to increase our wallet-share from existing customers and diversify our customer base in the Aerospace Segment, we intend to move up the value chain and increase our manufacturing of more critical and complex parts, such as engine and landing systems, as well as venture into the production of new engine and landing systems such as torque tube, engine nacelles and blades. Further, we intend to leverage our credibility with existing customers to increase amount of value addition across customers’ platform going forward. As a “Detailed Parts Partner Award (D2P)” partner for Airbus, we have access to a pool of contracts which they roll out for various manufacturing and assembly programs, thereby providing us with a competitive advantage over non-D2P partners for Airbus in securing such contracts. For details, see “Our Business – Our Strategies – Continue to increase wallet share with our existing customers in the Aerospace Segment by moving up the manufacturing value chain and diversify our customer base in the Aerospace Segment.” on page 302.

Engineering capabilities and our ability to develop innovative products and engineering solutions We leverage our engineering capabilities to create innovative products and engineering solutions for our OEM customers. Our engineering expertise allows us to develop fully manufactured products, starting from fundamental principles. This includes a wide range of functional and structural products within the Aerospace Segment (e.g., interior cargo, engine, landing gear, and actuation systems), consumer products (e.g., toys, cookware, and 542appliances), and components for portable computers and smart devices, among others. There is a high barrier to enter precision manufacturing business segments, due to the substantial investment required to establish advanced precision manufacturing capabilities, develop proof of concept and cultivate relationships with global OEMs (Source: F&S Report, see “Industry Overview”, para 1 on page 240). Thus, our revenue from operations will depend on our engineering capabilities and our ability to continue to develop innovative products and engineering solutions which meet the niche requirements of our global OEM customers, which will affect our ability to retain existing customers and attract new customers. For details, see “Risk Factors – Our success depends on our ability to develop new products within the Aerospace Segment and Consumer Segment in accordance with our customers’ niche requirements, in a timely manner. If our design, engineering and development, and execution efforts do not succeed in a timely manner or at all, or if the products we develop do not perform as expected, our business, financial condition, results of operations and cash flows could be adversely affected.” on page

84.

Further, the large scale, advanced manufacturing ecosystems have allowed us to develop a platform that can identify and capitalize on opportunities for future expansion of product lines. We have leveraged our core capabilities (such as surface treatment, forging, assembly, among others) in manufacturing products within the Aerospace Segment to manufacture consumer products. The consumer electronics products that we manufacture (portable computers and smart devices) have high barriers to entry (Source: F&S Report, see “Industry Overview”, para 1 on page 261). We also aim to leverage our platform to further grow our portfolio of consumer electronics and consumer durable products. As a platform for custom manufacturing based on specific client requirements, we are committed to developing innovative manufacturing processes while continuously improving existing ones to produce high-quality and reliable products in an efficient manner. Moreover, we have a manufacturing presence across India, USA and France, with strategic proximity to global OEMs, which enables us to create innovative products and engineering solutions for these OEMs. We are the only company in India in the Aerospace Segment with a presence in three continents, which enables us to access skilled workforce with diverse backgrounds and expertise (Source: F&S Report, see “Industry Overview”, para 2 on page 242). Our ability to access qualified workforce with diverse backgrounds and expertise through our global presence is critical to our ability to continue driving innovative manufacturing processes across our platform.

We have also entered into joint ventures to enhance our capabilities to develop new products and deliver engineering solutions. Our joint venture SQuAD, has equipped us with enhanced engineering capabilities to, among others, forge small to medium-sized aero-structural parts for engines, landing gear and braking system components in aluminium, steel, titanium or nickel-based alloys. Further, Aerospace Processing India Private Limited (“API”), which is our joint venture with Magellan Aerospace Limited, Canada formed in 2007 has enabled us to provide innovative surface treatment solutions.

As of September 30, 2025 our engineering and new product development team includes over 300 professionals, including process, testing, and tool engineers. We also utilize advanced quality assurance tools and methods to ensure the quality and reliability of our aerospace products, ensuring they meet customer requirements. We expect to continue our investments in improving our engineering capabilities and focus on continuing to improve our ability to develop innovative products and engineering solutions for our customers.

Vertical integration at our manufacturing ecosystems and facilities, and diversity of our product mix We are the only precision component manufacturer operating within a single special economic zone in India to offer fully vertically integrated manufacturing capabilities in the Aerospace Segment (Source: F&S Report, see “Industry Overview”, para 4 on page 238). Our capabilities and the success of our manufacturing ecosystems and facilities are the result of over two decades of experience and collaboration with customers and suppliers, providing us competitive advantages within the precision component manufacturing industry. Our ability to improve our profitability thus depends on our ability to continue to offer fully vertically integrated manufacturing capabilities which meet the evolving needs of our global OEM customers within the precision component manufacturing industry.

Our manufacturing ecosystems enable us to produce complex products at a large scale and in a timely manner to meet our global OEM customers’ requirements across the Aerospace Segment and Consumer Segment. As of September 30, 2025, we produced over 5,000 products within the Aerospace Segment under a variety of manufacturing and assembly programs, including programs for single aisle (such as A220, A320, B737) and long range (such as A330, A350, B777, B787) commercial aircrafts, established with our aerospace customers. In addition to our ability to manufacture a wide range of products, the vertical integration between different stages of the value-addition lifecycle at the manufacturing ecosystems, which comprise co-located manufacturing facilities (operated either by us, our joint ventures or by our contract manufacturers), together with our workforce 543of skilled engineers, enable us to scale the production of components for customers within contracted timelines, while continuing to meet their quality, delivery and safety standards. Further, over the past few years, we have selectively outsourced lower value added activities within and outside our manufacturing ecosystem to third-party sub-contractors co-located within our manufacturing ecosystem, which has allowed us to focus more on the manufacture of higher value added products.

We also maintain a healthy availability of manufacturing space for bespoke manufacturing requirements of our customers, with 2,201,098 square feet of aggregate manufacturing area (as of September 30, 2025) across the units in three manufacturing clusters in India we operate in and two manufacturing facilities outside India available for expansion and scaling production in a timely manner. Further, we are also proactive in integrating new technologies to align with the evolving technological demands of the aerospace and consumer industries, to ensure that we are equipped with capabilities to fulfil the niche product requirements by our customers. Our use of technology and investments in vertical integration across the manufacturing clusters we operate in and facilities enable us to maintain our operating margins and profitability, and a decline in such investments or the use of such technology could adversely affect our operating margins. See “Risk Factors – Significant disruptions of information technology systems or breaches of data security could have an adverse effect on our business, results of operations, financial condition and cash flows.” on page 80.

Cost and availability of materials We are a resource-intensive manufacturing business. Cost of materials consumed comprise a significant portion of our total expenses, as detailed below for the periods/years indicated:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Cost of materials consumed (₹ in million) 2,328.94 2,285.19 4,082.60 4,390.72 4,168.95 Cost of materials consumed, as a percentage of total 48.37 54.71 47.96 52.10 53.62 expenses (%) Further, we source our raw materials on a purchase order basis, and do not enter into long term contracts with suppliers. We purchase a portion of our materials from suppliers located in India and outside India (including China, Germany, France, the United States of America, United Kingdom, Taiwan and South Korea), as detailed below for the periods/years indicated:

Particulars For the six months For the Financial Year period ended September 30, 2025 2024 2025 2024 2023 Cost of materials sourced from suppliers located in 1,081.59 1,346.75 2,222.05 2,312.78 2,683.19 India (₹ in million) Cost of materials sourced from suppliers located in 45.27 50.69 49.88 49.75 56.79 India, as a percentage of total cost of materials sourced (%) Cost of materials sourced from suppliers located 1,307.68 1,309.97 2,232.85 2,336.07 2,041.56 outside India (₹ in million) Cost of materials sourced from suppliers located 54.73 49.31 50.12 50.25 43.21 outside India, as a percentage of total cost of materials sourced (%) We typically select our suppliers based on a variety of factors, including customer preference and our internal assessment of suppliers. Our customers typically provide us with a list of preferred raw materials suppliers, which we use to further filter and select our suppliers based on our own internal assessment of such suppliers by benchmarking their product quality, pricing, timing of delivery, among others. For details, see “Risk Factors – Our business is subject to fluctuations in the prices and disruptions in the availability of raw materials, which may have an adverse effect on our business, results of operations, financial condition and cash flows.” on page

41.

The principal raw materials that we use in our manufacturing processes include aluminum, steel and titanium.

Any significant increase in the prices of these or other critical raw materials could significantly affect our cost structure, which in turn could adversely affect our profit margins, disrupt our production schedules, and ultimately lead to a deterioration in our financial condition and results of operations. Given the sensitivity of our operations 544to raw material costs, effective management of our supply chain and strategic sourcing remains crucial to mitigating these risks. See also “Our Business – Description of Our Business – Raw Materials and Suppliers” on page 317.

Further, disruptions in the availability of quality raw materials from suppliers may lead to a deterioration in quality of our products, as the quality of our products is primarily derived from the quality of our raw materials. The availability of quality raw materials is affected by several factors, including production capacity constraints, trade restrictions, import tariffs and geopolitical factors that impact supply chain operations. The overall economic downturn and global uncertainty and instability have caused disruptions to the global supply chain. Some of the critical materials used in our manufacturing operations is sourced from China and any disruptions in supply chains involving China could adversely affect our business, results of operations, financial condition and cash flows.

Capacity utilization and operating efficiencies As of September 30, 2025, we operate units in three manufacturing clusters in India, and operate two manufacturing facilities in France and the USA. Across our three manufacturing ecosystems and two dedicated aerospace facilities, that we operate in, we had an aggregate capacity of 2,919,058 annual machining/molding hours for products within the Aerospace Segment and Consumer Segment, as of September 30, 2025. Higher production capacity utilization results in greater production volumes and higher sales and allow us to spread our fixed costs over a higher quantity of products sold, thereby increasing our profit margins. We utilize advanced automation across the manufacturing clusters we operate in and facilities, including inventory management and record-keeping, to improve operational efficiencies. We also plan to upgrade our existing machinery and purchase new machinery with modern technology, as and when required, to achieve better productivity and minimize our wastage. For details of our installed capacity and capacity utilization, see “Our Business – Description of Our Business –Manufacturing Clusters and Facilities” on page 312. Also see “Risk Factors – While we intend to use a portion of the Net Proceeds to purchase and install machinery and equipment for our Company and our subsidiary, AeroStructures Manufacturing India Private Limited, to expand our existing capacities, we cannot assure you that we will be able to maintain the existing levels of capacity utilization within the segments of our manufacturing clusters we operate in or facilities, which may adversely affect our results of operations.

Further, a slowdown or shutdown in our manufacturing operations could have an adverse effect on our business, results of operations, financial condition and cash flows.” on page 43.

Availability of duty exemptions and income tax deductions Manufacturing facilities in special economic zones (“SEZs”) are granted several fiscal incentives including a relaxation from income tax and indirect taxes for a specified period of time. We avail duty exemptions and income tax deductions arising from our operations in the SEZ in Belagavi (Karnataka), Koppal (Karnataka) and export- oriented unit (“EOU”) at Hubballi (Karnataka) such as those available to us under Income Tax Act, GST Act and Customs Act, as detailed in the table below for the six months period ended September 30, 2025 and 2024 and the periods/years indicated:

Particulars For the six months period For the Financial Year ended September 30, 2025 2024 2025 2024 2023 Duty exemptions and income tax deductions arising 1,467.50 1,009.51 2,135.32 2,059.67 1,807.00 from operations in SEZ and EOU (₹ in million) Duty exemptions and income tax deductions arising 27.32 21.99 23.09 21.34 22.25 from operations in SEZ and EOU, as a percentage of revenue from operations (%) Thus, in case these duty exemptions and income tax deductions arising from our operations in SEZ and EOU which are currently available to us are discontinued in the future for any reason, our results of operations may be affected.

Material Accounting Policies Basis of preparation and presentation The Restated Consolidated Financial Information of the Group, its associate and its joint ventures comprise the Restated Consolidated Statement of Assets and Liabilities as at September 30, 2025, September 30, 2024, March 31, 2025, March 31, 2024 and March 31, 2023, the Restated Consolidated Statement of Profit and Loss (including Other Comprehensive Income), the Restated Consolidated Statement of Changes in 545Equity and Restated Consolidated Statement of Cash Flows for the six months period ended September 30, 2025 and September 30, 2024 and for the years ended March 31, 2025, March 31, 2024 and March 31, 2023, the Material Accounting Policies and Explanatory Information and Notes (hereinafter referred to as “Restated Consolidated Financial Information”).

The Restated Consolidated Financial Information have been prepared on a going concern basis. The accounting policies are applied consistently to all the periods/years presented in the Restated Consolidated Financial Information. These Restated Consolidated Financial Information have been prepared by the management of our Company as required under the Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended (“ICDR Regulations”) issued by the Securities and Exchange Board of India (“SEBI”), in pursuance of the Securities and Exchange Board of India Act, 1992, for the purpose of inclusion in the Red Herring Prospectus (“RHP”) and Prospectus in connection with proposed initial public offering of our Company’s equity shares. Accordingly, the Restated Consolidated Financial Information may not be suitable for any other purpose and this report should not be used, referred to or distributed for any other purpose.

These Restated Consolidated Financial Information, have been prepared by our Company in terms of the

requirements of: a. Section 26 of Part I of Chapter III of the Companies Act, 2013, as amended (“the Act”); b. The Securities and Exchange Board of India (Issue of Capital and Disclosure Requirements) Regulations, 2018, as amended; and c. The Guidance Note on Reports in Company Prospectuses (Revised 2019) issued by the Institute of Chartered Accountants of India (ICAI) (the “Guidance Note”).

The Restated Consolidated Financial Information have been prepared to comply in all material respects with the Indian Accounting Standards (“Ind AS”) as specified under Section 133 of the Act rea with the Companies (Indian Accounting Standards) Rules, 2015 (as amended from time to time), presentation requirements of Division II of Schedule III to the Act, as applicable to the consolidate financial statements and other relevant provisions of the Act.

The Restated Consolidated Financial Information has been compiled by the management of our Company

from: - Audited special purpose consolidated interim financial statements of the Group and its joint ventures as at and for the six months period ended September 30, 2025 prepared in accordance with Indian Accounting Standard (Ind AS) 34 “Interim Financial Reporting” as specified under section 133 of the Act and other accounting principles generally accepted in India and presentation requirements of Schedule III of the Act, except for presenting statements of profit and loss for the current interim three months period ended september 30, 2025 and its comparative interim period of the immediately preceding financial year as required by Ind AS 34, which have been approved by the Board of Directors at their meeting held on November 14, 2025;

- Audited special purpose consolidated interim financial statements of the Group and its joint ventures as at and for the six months period ended September 30, 2024 prepared in accordance with Ind AS as specified under section 133 of the Act and other accounting principles generally accepted in India and presentation requirements of Schedule III of the Act except for presenting comparative financial information as required by Ind AS 34, which have been approved by the Board of Directors at their meeting held on November 14, 2025;

- Audited Consolidated financial statements of the Group and its joint ventures as at and for the years ended March 31, 2025 and 31 March 2024 prepared in accordance with the Ind AS as specified under Section 133 of the Act read with Companies (Indian Accounting Standards) Rules 2015, as amended, and other accounting principles generally accepted in India, which have been approved by the Board of Directors at their meeting held on August 12, 2025 and October 4, 2024, respectively ; and - Audited Consolidated financial statements of the Group and its associate and joint ventures as at and for the years ended March 31, 2023 prepared in accordance with Ind AS as specified under Section 133 of the Act read with Companies (Indian Accounting Standards) Rules 2015, as amended, and other accounting principles generally accepted in India, which have been approved by the Board of 546Directors at their meeting held on September 23, 2023.

The Restated Consolidated Financial Information: a) have been prepared after incorporating adjustments for the changes in accounting policies, material errors, and regrouping / reclassifications retrospectively in the six months period ended September 30, 2024 and financial years ended March 31, 2025, March 31, 2024 and March 31, 2023 to reflect the same accounting treatment as per the accounting policies and grouping/classifications followed as at and for the year ended September 30, 2025;

b) does not contain any modification requiring adjustments. Moreover, matters in the Auditor’s report, which do not require any corrective adjustments in the Restated Consolidated Financial Information have been disclosed in Part B of Annexure VI of the Restated Consolidated Financial Information;

and c) have been prepared in accordance with the Act, ICDR Regulations and Guidance Note These Restated Consolidated Financial Information are presented in Indian Rupees (INR), which is also our Parent Company’s functional currency. All amounts have been rounded to the two decimal nearest millions, unless otherwise indicated.

The Restated Consolidated Financial Information are approved for issue by the Company’s Board of Directors on November 14, 2025 These Restated Consolidated Financial Information are prepared in accordance with Indian Accounting Standards (Ind AS) under the historical cost convention on the accrual basis, except for th following which

have been measured at fair value: • Certain financial assets and liabilities are measured at fair value (refer Note 27) • Share-based payments • Defined employee benefit plans; and • Assets held for sale measured at lower of cost and fair value less cost to sell.

Functional and presentation currency The Restated Consolidated Financial Information of our Group and our associate and joint ventures are presented in Indian Rupees (INR / ₹), which is the functional currency of the Parent Company and the presentation currency for the Restated Consolidated Financial Information. All amounts disclosed in the Restated Consolidated Financial Information have been rounded to the two decimal of nearest millions (Mn) as per the requirement of Schedule III of Companies Act, 2013, unless otherwise stated. Amounts mentioned as “0.00” in the financial statements denote amounts rounded off being less than ₹ 0.005 Mn.

Accounting policy on EBITDA As permitted by the Guidance Note on Division II - Ind AS Schedule III to the Companies Act 2013, we have elected to present earnings before interest, tax, depreciation and amortization (EBITDA) as a separate line item on the face of the Restated Consolidated Statement of profit and loss. We measure EBITDA on the basis of profit/(loss) from continuing operations. In its measurement, we do not include depreciation and amoritization expense, finance costs, share of net profit/(loss) of associate and joint ventures accounted for using the equity method net of tax, exceptional items gain/(loss) and income tax expenses.

Principles of consolidation and equity accounting The Restated Consolidated Financial Information incorporate the financial statements of our Parent Company and entities controlled by our Parent Company i.e., our subsidiaries. It also includes our share of profits/(loss), net assets and retained post acquisition reserves of joint ventures and associates that are consolidated using the equity method of consolidation.

Control is achieved when our Company is exposed to or has rights to the variable returns of the entity and the ability to affect those returns through its power to direct the relevant activities of the entity.

547The results of subsidiaries, joint ventures and associates acquired or disposed off during the year are included in the restated consolidated statement of profit and loss from the effective date of acquisition or up to the effective date of disposal, as appropriate.

Wherever necessary, adjustments are made to the financial statements of subsidiaries, joint ventures and associates to bring their accounting policies in line with those used by other entities of ours.

Subsidiaries Subsidiaries are entities controlled by us. We ‘control’ an entity when it is exposed to, or has rights to, variable returns from its involvement with the entity and has the ability to affect those returns through its power over the entity. The financial statements of subsidiaries are included in the restated consolidated financial statements from the date on which control commences until the date on which control ceases.

Items of assets, liabilities, equity, income, expenses and cash flows of the parent with those of its subsidiaries are combined like to like basis. For this purpose, income and expenses of the subsidiary are based on the amounts of the assets and liabilities recognized in the consolidated financial statements at the acquisition date.

Non-controlling interests (NCI) Non-controlling interests in the net assets of consolidated subsidiaries are identified separately from our equity. The interest of non-controlling shareholders may be initially measured either at fair value or at the non-controlling interests’ proportionate share of the fair value of the acquiree’s identifiable net assets. The choice of measurement basis is made on an acquisition-by-acquisition basis. Subsequent to acquisition, the carrying value of non-controlling interests is the amount of those interests at initial recognition plus the non- controlling interests’ share of subsequent changes in equity. Total comprehensive income is attributed to non-controlling interests even if it results in the non-controlling interests having a deficit balance.

Transactions eliminated on consolidation Intra Group balances and transactions, and any unrealised income and expenses arising from intra-Group transactions, are eliminated. Unrealised gains arising from transactions with equity accounted investees are eliminated against the investment to the extent of our interest in the investee. Unrealised losses are eliminated in the same way as unrealised gains, but only to the extent that there is no evidence of impairment.

Business combination A common control business combination, involving entities or businesses in which all the combining entities or businesses are ultimately controlled by the same party or parties both before and after the business combination and where the control is not transitory, is accounted for using the pooling of interest method in accordance with Ind AS 103 'Business Combinations'. Other business combinations, involving entities or businesses are accounted for using acquisition method. Consideration transferred in such business combinations is measured at fair value, which is calculated as the sum of the acquisition date fair values of the assets transferred by us, liabilities incurred by us to the former owners of the acquiree and the equity interests issued by us in exchange of control of the acquiree. Goodwill is recognised and is measured as the excess of the sum of the (i) consideration transferred, (ii) the amount of any non-controlling interests in the acquiree, and (iii) the fair value of the acquirer's previously held equity interest in the acquiree, over the net of the consideration date amounts of the identifiable assets acquired and the liabilities assumed. If those amounts are less than the fair value of the net identifiable assets of the business acquired, the difference is recognised in other comprehensive income and accumulated in equity as capital reserve provided there is clear evidence of the underlying reasons for classifying the business combination as a bargain purchase. In other cases, the bargain purchase gain is recognised directly in equity as capital reserve.

Goodwill Goodwill is initially recognised as an asset at cost and is subsequently measured at cost less any accumulated impairment losses. For the purpose of impairment testing, goodwill is allocated to each of our cash- generating units or our cash generating units that are expected to benefit from the synergies of the combination. Cash-generating units to which goodwill has been allocated are tested for impairment annually, 548or more frequently when there is an indication that the unit’s value may be impaired. If the recoverable amount of the cash-generating unit is less than the carrying value of the unit, the impairment loss is allocated first to reduce the carrying value of any goodwill allocated to the unit and then to the other assets of the unit in proportion to the carrying value of each asset in the unit. An impairment loss recognised for goodwill is not reversed in a subsequent period. On disposal of a subsidiary, the attributable amount of goodwill is included in the determination of profit or loss on disposal. Goodwill is not amortised but it is tested for impairment annually, or more frequently if events or changes in circumstances indicate that it might be impaired.

Investment in associates Associates are those enterprises over which the we has significant influence but does not have control or joint control. Investments in associates are accounted for using the equity method and are initially recognised at cost from the date significant influence commences until the date that significant influence ceases.

Subsequent changes in the carrying value reflect the post-acquisition changes in our share of net assets of the associate and impairment charges, if any. When our share of losses exceeds the carrying value of the associate, the carrying value is reduced to nil and recognition of further losses is discontinued, except to the extent that we have incurred obligations in respect of the associate. Unrealised gains on transactions between us and our associates are eliminated to the extent of our interest in the associates, unrealised losses are also eliminated unless the transaction provides evidence of an impairment of the asset transferred and where material, the results of associates are modified to conform to our accounting policies.

Investment in joint ventures A joint arrangement is a contractual arrangement whereby we and other parties undertake an economic activity where the strategic financial and operating policy decisions relating to the activities of the joint arrangement require the unanimous consent of the parties sharing control.

Joint arrangements that involve the establishment of a separate entity in which each co venturer has an interest are referred to as joint ventures. We report our interests in joint ventures using the equity method of accounting whereby an interest in joint venture is initially recorded at cost and adjusted thereafter for post- acquisition changes in our share of net assets of the joint venture. The consolidated statement of profit and loss reflects our share of the results of operations of the joint venture.

When our share of losses exceeds the carrying value of the joint venture, the carrying value is reduced to nil and recognition of further losses is discontinued, except to the extent that we have incurred obligations in respect of the joint venture. Unrealized gains on transactions between us and our joint ventures are eliminated to the extent of our interest in the joint venture, unrealized losses are also eliminated unless the transaction provides evidence of an impairment of the asset transferred and where material, the results of joint ventures are modified to confirm to our accounting policies.

Segment reporting Operating segment reflect our management structure and the way the financial information is regularly reviewed by the Executive Chairman and Chief Executive Officer (our Chief Operating Decision Maker (“CODM”)). The CODM considers the business from both business and product perspective based on the dominant source, nature of risks and returns and the internal organisation and management structure.

Segment revenue, segment expenses, segment assets and segment liabilities have been identified to the segment on the basis of their relationship to the operating activities of the segment.

Revenue, expenses, assets and liabilities which relate to us as a whole and are not allocable to segments on reasonable basis have been included under unallocated revenue / expenses / assets / liabilities.

Our CODM is identified to be the Executive Chairman and Chief Executive Officer of our Company, who plans the allocation of resources and assess the performance of the segments. We have two reportable segments 'Aerospace' and 'Consumer' to be reported in its financial statements.

Foreign currency transactions 549In preparing the Restated Consolidated Financial Information, transactions in currencies other than the entity’s functional currency are recorded at the rates of exchange prevailing on the date of the transaction.

At the end of each reporting period, monetary items denominated in foreign currencies are re-translated at the rates prevailing at the end of the reporting period. Non-monetary items carried at fair value that are denominated in foreign currencies are re-translated at the rates prevailing on the date when the fair value was determined. Non-monetary items that are measured in terms of historical cost in a foreign currency are not translated.

For the purpose of presenting the Restated Consolidated Financial Information, the assets and liabilities of our Parent Company’s foreign subsidiaries, associates and joint ventures are expressed in using exchange rates prevailing at the end of the reporting period. Income and expense items are translated at the average exchange rates for the period. Exchange differences arising, if any, are recognised in other comprehensive income and accumulated in a separate component of equity. On the disposal of a foreign operations, all of the accumulated exchange differences in respect of that operations attributable to our Company are reclassified to the consolidated statement of profit and loss.

Goodwill and fair value adjustments arising on the acquisition of a foreign operation are treated as assets and liabilities of the foreign operations and translated at the closing rate.

Revenue recognition We earn our revenue from sale of manufactured goods and rendering of services. We have determined that it is a principal in all its arrangements with its customers.

We recognise revenue when control of goods has transferred to customers and there are no unfulfilled obligations that could affect the customer's acceptance of the products. Control of goods is considered to be transferred at a point-in-time when goods have been despatched or delivered, as per the terms agreed with the customer as that is when the legal title, physical possession and risks and rewards of goods transfers to the customers.

Revenue from services is recognised in the accounting period in which services are rendered.

We do not have any contracts where the period between the transfer of goods or services to the customer and payment by the customer exceeds one year. Accordingly, we do not adjust any of the transaction prices for time value of money.

Revenue towards satisfaction of a performance obligation is measured at the amount of transaction price allocated to that performance obligation. As a practical expedient, we have opted not to disclose the information in respect of performance obligations that are part of contracts that has an original expected duration of one year or less.

A contract asset is recognised when we get the right to consideration in exchange for goods or services that it has transferred to the customers and the right is conditional upon acts other than passage of time.

When the payment exceeds the value of goods supplied or services rendered, a contract liability (advance from customers) is recognised.

Government grants Government grants are recognised when there is reasonable assurance that the we will comply with the relevant conditions and the grant will be received. Government grants are recognised in the statement of profit and loss, either on a systematic basis when we recognize, as expenses, the related costs that the grants are intended to compensate or, immediately if the costs have already been incurred. Government grants related to assets are deferred and amortised over the useful life of the asset.

Income tax The income tax expense or credit for the year is the tax payable on the current year's taxable income based on the applicable income tax rate applicable adjusted by changes in deferred tax assets and liabilities attributable to temporary differences and to unused tax losses.

550The current income tax charge is calculated on the basis of the tax laws enacted or substantively enacted at the end of the reporting year in the countries where the parent company and its subsidiaries and associates operate and generate taxable income. Management periodically evaluates positions taken in tax returns with respect to situations in which applicable tax regulation is subject to interpretation and considers whether it is probable that a taxation authority will accept an uncertain tax treatment. We measure our tax balances either based on the most likely amount or the expected value, depending on which method provides a better prediction of the resolution of the uncertainty.

Deferred income tax is provided on temporary differences arising between the tax bases of assets and liabilities and their carrying amounts in the financial statements. Deferred income tax is also not accounted for if it arises from initial recognition of an asset or liability in a transaction other than a business combination that at the time of the transaction affects neither accounting profit nor taxable profit (tax loss). Deferred income tax is determined using tax rates (and laws) that have been enacted or substantially enacted by the end of the reporting period and are expected to apply when the related deferred income tax asset is realized or the deferred income tax liability is settled.

Deferred tax assets are recognised for all deductible temporary differences and unused tax losses only if it is probable that future taxable amounts will be available to utilise those temporary differences and losses.

Deferred tax assets and liabilities are offset when there is a legally enforceable right to offset current tax assets and liabilities and when the deferred tax balances relate to the same taxation authority. Current tax assets and tax liabilities are offset where the entity has a legally enforceable right to offset and intends either to settle on a net basis, or to realise the asset and settle the liability simultaneously. Deferred tax assets are reviewed at each reporting date.

Current and deferred tax is recognised in profit or loss, except to the extent that it relates to items recognised in other comprehensive income or directly in equity. In this case, the tax is also recognised in other comprehensive income or directly in equity, respectively.

Leases At inception of a contract, we assess whether a contract is, or contains, a lease. A contract is, or contains, a lease if the contract conveys the right to control the use of an identified asset for a period of time in exchange for consideration.

As a lessee Leases are recognised as a right of use asset and a corresponding liability at the date at which the leased asset is available for use by us. Contracts may contain both lease and non-lease components. We allocate the consideration in the contract to the lease and non-lease components based on their relative stand-alone prices.

Assets and liabilities arising from a lease are initially measured on a present value basis. Lease liabilities

include the net present value of the following lease payments: - Fixed payments (including in-substance fixed payments), less any lease incentives receivable. - Variable lease payment that are based on an index or a rate, initially measured using the index or rate as at the commencement date.

- Amounts expected to be payable by us under residual value guarantees. - The exercise price of a purchase option if we are reasonably certain to exercise that option. - Payments of penalties for terminating the lease, if the lease term reflects us exercising that option.

The lease liability is measured at amortised cost using the effective interest method. It is remeasured when there is a change in future lease payments arising from a change in an index or rate, if there is a change in our estimate of the amount expected to be payable under a residual value guarantee, if we change our assessment of whether it will exercise a purchase, extension or termination option or if there is a revised in-substance fixed lease payment.

When the lease liability is remeasured in this way, a corresponding adjustment is made to the carrying amount of the right-of-use asset, or is recorded in profit or loss if the carrying amount of the right- of-use asset has been reduced to zero.

551Lease payments to be made under reasonably certain extensions options are also included in the measurement of the liability. The lease payments are discounted using the interest rate implicit in the lease. If the rate cannot be readily determined, as in the case of lease of buildings, our incremental borrowing rate is used, being the rate that we would have to pay to borrow the funds necessary to obtain the asset of similar value to the right of use asset in a similar economic environment with similar terms, security and conditions.

Lease payments are allocated between principal and finance cost. The finance cost is charged to profit or loss over the lease period so as to produce a constant periodic rate of interest on the remaining balance of the liability for each period.

Right of use assets are measured at cost comprising of the following: - The amount of the initial measurement of lease liability - Any lease payments made on or before the commencement date less any lease incentives received - Any initial direct cost - Restoration cost Right of use assets are generally depreciated over the shorter of the asset's useful life and the lease term on a straight line basis. Where we are reasonably certain to exercise the purchase option, the right of use asset is depreciated over the underlying asset's useful life.

Payment associated with short-term lease of equipment and all leases of low-value assets are recognised on a straight line basis as an expense in profit or loss. Short term leases are leases with a lease term of 12 months or less.

Impairment of assets At each balance sheet date, we review the carrying value of our property, plant and equipment, intangible assets and right of use assets to determine whether there is any indication that the carrying value of those assets may not be recoverable through continuing use. If any such indication exists, the recoverable amount of the asset is reviewed in order to determine the extent of impairment loss, if any. Where the asset does not generate cash flows that are independent from other assets, we estimate the recoverable amount of the cash generating unit to which the asset belongs.

Recoverable amount is the higher of fair value less costs to sell and value in use. In assessing value in use, the estimated future cash flows are discounted to their present value using a pre-tax discount rate that reflects current market assessments of the time value of money and the risks specific to the asset for which the estimates of future cash flows have not been adjusted. An impairment loss is recognised in the consolidated statement of profit and loss as and when the carrying value of an asset exceeds its recoverable amount.

Where an impairment loss subsequently reverses, the carrying value of the asset (or cash generating unit) is increased to the revised estimate of its recoverable amount, so that the increased carrying value does not exceed the carrying value that would have been determined had no impairment loss been recognised for the asset (or cash generating unit) in prior years. A reversal of an impairment loss is recognised in the consolidated statement of profit and loss immediately.

Cash and cash equivalents For the purpose of presentation in the statement of cash flows, cash and cash equivalents includes cash on hand, deposits held at call with financial institutions, other short-term, highly liquid investments with original maturities of three months or less that are readily convertible to known amounts of cash and which are subject to an insignificant risk of changes in value, and bank overdrafts.

Trade receivables Trade receivables are amounts due from customers for goods sold or services performed in the ordinary course of business and reflects our unconditional right to consideration (that is, payment is due only on the passage of time). Trade receivables are recognised initially at the transaction price as they do not contain significant financing components. We hold the trade receivables with the objective of collecting the contractual cash flows and therefore measures them subsequently at amortised cost using the effective interest method, less loss allowance.

552Inventories Inventories include raw materials (including stores, spares and packing material), work in progress and finished goods. Inventories are stated at the lower of cost and net realizable value. Cost of raw materials comprise of cost of purchases, freight and other expenses incurred in bringing the raw materials to the manufacturing location, excluding rebates and discounts.

Cost of work in progress and finished goods comprises direct materials, direct labour and an appropriate portion of variable and fixed overhead expenditure, the latter being allocated on the basis of normal operating capacity.

Costs are assigned to individual items on weighted average cost basis which is calculated on the basis of total cost of raw materials divided by the quantities purchased. Net realizable value is the estimated selling price in the ordinary course of business less the estimated costs of completion and the estimated costs necessary to make the sale.

Investments and other financial assets Classification

We classify our financial assets in the following measurement categories: - those to be measured subsequently at fair value (either through other comprehensive income, or through profit or loss), and - those measured at amortised cost.

The classification depends on the entity's business model for managing the financial assets and the contractual terms of the cash flows.

For assets measured at fair value, gains and losses will either be recorded in profit or loss or other comprehensive income. For investments in equity instruments (not held for trading purpose), this will depend on whether we have made an irrevocable election at the time of initial recognition to account for the equity investment at fair value through other comprehensive income.

Recognition Regular way purchases and sales of financial assets are recognised on trade-date, the date on which we commit to purchase or sale the financial assets.

Measurement At initial recognition, we measure a financial asset (other than trade receivables) at its fair value plus, in the case of a financial asset not at fair value through profit or loss, transaction costs that are directly attributable to the acquisition of the financial asset. Transaction costs of financial assets carried at fair value through profit or loss are expensed in profit or loss.

(a) Amortized cost: Assets that are held for collection of contractual cash flows where those cash flows represent solely payments of principal and interest are measured at amortized cost. Interest income from these financial assets is included in finance income using the effective interest rate method (refer note 28 for asset details).

(b) Fair value through other comprehensive income (“FVOCI”): Assets that are held for collection of contractual cash flows and for selling the financial assets, where the assets' cash flows represent solely payments of principal and interest, are measured at FVOCI. Movements in the carrying amount are taken through OCI, except for the recognition of impairment gains or losses, interest revenue and foreign exchange gains and losses which are recognised in profit and loss. When the financial asset is derecognized, the cumulative gain or loss previously recognised in OCI is reclassified from equity to profit or loss and recognised in other gains/(losses). Interest income from these financial assets is included in other income using the effective interest rate method. Foreign exchange gains and losses are presented in other expenses and impairment expenses in other expenses.

553Impairment of financial asset We assess on a forward looking basis the expected credit losses associated with its assets carried at amortised cost. The impairment methodology applied depends on whether there has been a significant increase in credit risk. Note 28 details how we determine whether there has been a significant increase in credit risk. For trade receivables only, we apply the simplified approach required by Ind AS 109 Financial Instruments, which requires expected lifetime losses to be recognised from initial recognition of the receivables.

Derecognition of financial assets A financial asset is derecognized only when • we have transferred the rights to receive cash flows from the financial asset or • retains the contractual rights to receive the cash flows of the financial asset, but assumes a contractual obligation to pay the cash flows to one or more recipients.

Where the entity has transferred an asset, we evaluate whether it has transferred substantially all risks and rewards of ownership of the financial asset. In such cases, the financial asset is derecognized. Where the entity has not transferred substantially all risks and rewards of ownership of the financial asset, the financial asset is not derecognized.

Where the entity has neither transferred a financial asset nor retains substantially all risks and rewards of ownership of the financial asset, the financial asset is derecognized if hawse have not retained control of the financial asset. Where we retain control of the financial asset, the asset is continued to be recognised to the extent of continuing involvement in the financial asset.

Income recognition Interest income from financial assets at fair value through profit and loss is disclosed as interest income within finance income. Interest income from financial assets at amortized cost is calculated using the effective interest method and is recognised in the statement of profit and loss using the effective interest rate method.

Dividend Income Dividend income is recognised in profit or loss on the date on which our right to receive payment is established.

Property, plant and equipment All items of property, plant and equipment are stated at historical cost or deemed cost applied on transition to Ind AS less depreciation. Historical cost includes expenditure that is directly attributable to the acquisition of the items, net of refundable taxes. Subsequent costs are included in the asset's carrying amount or recognised as a separate asset, as appropriate, only when it is probable that future economic benefits associated with the item will flow to us and the cost of the item can be measured reliably. When significant spare parts of an item of property, plant and equipment have different useful lives, they are accounted for as separate items (major components) of property, plant and equipment. The carrying amount of any component accounted for as a separate asset is derecognised when replaced. All other repairs and maintenance are charged to profit or loss during the reporting period in which they are incurred.

Depreciation commences when the assets are ready for their intended use. An asset's carrying amount is written down immediately to its recoverable amount if the asset's carrying amount is greater than its estimated recoverable amount. Gains and losses on disposals are determined by comparing proceeds with carrying amount. These are included in statement of profit and loss within other income/(expenses).

Depreciation methods, estimated useful lives and residual value Depreciation is calculated using the straight-line method to allocate their cost, net of their residual values, over their estimated useful lives or, in case of certain leased machineries, the shorter lease term as follows:

The estimated useful lives of assets are as follows:

554Asset Useful life (in years) Leasehold improvements 10 or lease period, whichever is lower Plant and machinery 1.5 to 10 Computers 3 to 6 Furniture and fittings 1.5 to 5 Vehicles 10 Office and other equipment 1.5 to 5 The useful lives have been determined based on technical evaluation done by the management which are higher than those specified by Schedule II to the Companies Act, 2013, in order to reflect the actual usage of the assets. The residual values are not more than 5% of the original cost of the asset.

The assets' residual values and useful lives are reviewed, and adjusted if appropriate, at the end of each reporting period. Assets in the course of development or construction are not depreciated.

Investment property Property that is held for long-term rental yields or for capital appreciation or both, and that is not occupied by us, is classified as investment property. Investment property is measured initially at its cost, including related transaction costs and where applicable borrowing costs. Subsequent expenditure is capitalised to the asset’s carrying amount only when it is probable that future economic benefits associated with the expenditure will flow to us and the cost of the item can be measured reliably. All other repairs and maintenance costs are expensed when incurred. When part of an investment property is replaced, the carrying amount of the replaced part is derecognised. Investment properties are depreciated using the straight-line method over their estimated useful lives. Investment property (building) is depreciated over the estimated remaining useful life of 7 years. The useful life has been determined based on technical evaluation performed by the management’s expert.

Intangible assets Intangible assets include Computer software and Technical knowhow. Costs associated with maintaining software programs are recognised as an expense as incurred. Technical knowhow comprises of capitalized product developed costs, being an internally generated intangible asset.

We amortize intangible assets with finite useful life using the straight-line method over the following estimated

useful lives:

Asset Useful life (in years) Computer software 2 - 10 years Technical knowhow 5 years Trade and other payables These amounts represent liabilities for goods and services provided to us prior to the end of financial year which are unpaid. The amounts are unsecured. Trade and other payables are presented as current liabilities unless payment is not due within 12 months after the reporting period. They are recognised initially at their fair value and subsequently measured at amortized cost using the effective interest method.

Borrowings Borrowings are initially recognised at fair value, net of transaction costs incurred. Borrowings are subsequently measured at amortised cost. Any difference between the proceeds (net of transaction costs) and the redemption amount is recognised in profit or loss over the period of the borrowings using the effective interest method. Fees paid on the establishment of loan facilities are recognised as transaction costs of the loan to the extent that it is probable that some or all of the facility will be drawn down. In this case, the fee is deferred until the draw down occurs. To the extent there is no evidence that it is probable that some or all of the facility will be drawn down, the fee is capitalised as a prepayment for liquidity services and amortised over the period of the facility to which it relates.

555Borrowings are classified as current liabilities unless we have an unconditional right to defer settlement of the liability for at least 12 months after the reporting period. Where there is a breach of a material provision of a long-term loan arrangement on or before the end of the reporting period with the effect that the liability becomes payable on demand on the reporting date, the entity does not classify the liability as current, if the lender agreed, after the reporting period and before the approval of the financial statements for issue, not to demand payment as a consequence of the breach.

Borrowing costs General and specific borrowing costs that are directly attributable to the acquisition, construction or production of a qualifying asset are capitalised during the period of time that is required to complete and prepare the asset for its intended use or sale. Qualifying assets are assets that necessarily take a substantial period of time to get ready for their intended use or sale. Investment income earned on the temporary investment of specific borrowings pending their expenditure on qualifying assets is deducted from the borrowing costs eligible for capitalization. Other borrowing costs are expensed in the period in which they are incurred.

Employee benefits Short-term obligations Liabilities for wages and salaries, including non-monetary benefits that are expected to be settled wholly within 12 months after the end of the period in which the employees render the related service are recognised in respect of employees ' services up to the end of the reporting period and are measured at the amounts expected to be paid when the liabilities are settled. The liabilities are presented as current employee benefit obligations in the Balance Sheet.

Other long-term employee benefit obligations Leave obligations are presented as current liabilities in the balance sheet since the entity does not have an unconditional right to defer settlement for at least twelve months after the reporting period, regardless of when the actual settlement is expected to occur.

Post-employment obligations We operate the following post-employment schemes: - defined benefit plans such as gratuity, pension obligations; and - defined contribution plans such as provident fund and ESI.

(a) Defined benefit plans:

A defined benefit plan is a post-employment benefit plan other than a defined contribution plan. Our net obligation in respect of defined benefit plans is calculated separately for each plan by estimating the amount of future benefit that employees have earned in the current and prior periods, discounting that amount and deducting the fair value of any plan assets.

Gratuity obligations (India):

The liability or asset recognised in the balance sheet in respect of gratuity plans is the present value of the defined benefit obligation at the end of the reporting period. The defined benefit obligation is calculated annually by actuaries using the projected unit credit method.

The present value of the defined benefit obligation denominated in INR is determined by discounting the estimated future cash outflows by reference to market yields at the end of the reporting period on government bonds that have terms approximating to the terms of the related obligation.

The interest cost is calculated by applying the discount rate to the net balance of the defined benefit obligation. This cost is included in employee benefit expense in the statement of profit and loss.

556Remeasurement gains and losses arising from experience adjustments and changes in actuarial assumptions are recognised in the period in which they occur, directly in other comprehensive income.

They are included in retained earnings in the statement of changes in equity and in the balance sheet.

Pension obligations (France):

The French pension system is operated on a “pay as you go” basis. Each employee is entitled to receive a basic pension from the Social Security plus a complementary pension from defined contribution schemes ARRCO and AGIRC (solely for management for AGIRC). Moreover, retiring allowances (lump sums) must by law be paid by the employer when employees retire. The defined benefit obligation is calculated annually by actuaries using appropriate criteria applicable in France.

(b) Defined contribution plans:

A defined contribution plan is a post-employment benefit plan where the our legal or constructive obligation is limited to the amount that it contributes to a separate legal entity.

India:

We make specified monthly contributions towards Employees Provident Fund Organisation and Employees State Insurance Corporation. Obligations for contributions to defined contribution plans are expensed as an employee benefits expense in the statement of profit and loss in period in which the related service is provided by the employee. Prepaid contributions are recognised as an asset to the extent that a cash refund or a reduction in future payments is available.

United States of America:

Eligible employees of our Group in the United States participate in an employee retirement savings plan (the “401K Plan”) under section 401(K) of the United States Internal Revenue Code. The 401K plan allows for the employees to defer a portion of their annual earnings on a pre-tax basis through voluntary contributions to the 401K plan. Our contribution to the plan is discretionary and no contribution has been made on this account during the current and previous reporting years.

Share-based payments Share-based compensation benefits are provided to employees through the Aequs Stock Option Plan. The fair value of options granted under the Aequs Employee Stock Option Plan is recognised as an employee benefits expense with a corresponding increase in equity.

The total amount to be expensed is determined by reference to the fair value of the options granted: - including any market performance conditions (e.g., the entity's share price), and - including the impact of any service and non-market performance vesting conditions.

The total expense is recognised over the vesting period, which is the period over which all of the specified vesting conditions are to be satisfied on an accelerated basis. At the end of each period, the entity revises its estimates of the number of options that are expected to vest based on the non-market vesting and service conditions. It recognizes the impact of the revision to original estimates, if any, in profit or loss, with a corresponding adjustment to equity.

Financial guarantee contracts Financial guarantee contracts are recognised as a financial liability at the time the guarantee is issued. The liability is initially measured at fair value and subsequently at the higher of the (i) amount determined in accordance with the expected credit loss model as per Ind AS 109 and the amount initially recognised less, where appropriate, cumulative amount of income recognised in accordance with the principles of Ind AS

115. The fair value of financial guarantees is determined as the present value of the difference in net cash flows between the contractual payments under the debt instrument and the payments that would be required without the guarantee, or the estimated amount that would be payable to a third party for assuming the obligation.

557Where guarantees in relation to loans or other payables of associates are provided for no compensation, the fair values are accounted for as contributions and recognised as part of the cost of the investments.

Contributed equity Incremental costs directly attributable to the issue of new shares are shown in equity as a deduction, net of tax, from securities premium.

Non-current assets held for sale and discontinued operations Non-current assets and disposal Groups classified as held for sale are measured at the lower of their carrying value and fair value less costs to sell. Assets and disposal Groups are classified as held for sale if their carrying value will be recovered through a sale transaction rather than through continuing use. This condition is only met when the sale is highly probable and the asset, or disposal Group, is available for immediate sale in its present condition and is marketed for sale at a price that is reasonable in relation to its current fair value.

We must also be committed to the sale, which should be expected to qualify for recognition as a completed sale within one year from the date of classification. Where a disposal Group represents a separate major line of business or geographical area of operations, or is part of a single co-ordinated plan to dispose of a separate major line of business or geographical area of operations, then it is treated as a discontinued operations. The post-tax profit or loss of the discontinued operations together with the gain or loss recognised on its disposal are disclosed as a single amount in the statement of profit and loss, with all prior periods being presented on this basis.

Earnings per share Basic earnings per share

Basic earnings per share is calculated by dividing: • the profit/(loss) attributable to our equity holders • by the weighted average number of equity shares outstanding during the year.

Diluted earnings per share

Diluted earnings per share is calculated by dividing: • the profit/(loss) after tax as adjusted for dividend, interest (net of any attributable taxes) other charges to expense or income relating to the dilutive potential equity shares, • by the weighted average number of equity shares considered for deriving basic earnings per share and the weighted average number of equity shares which could have been issued on the conversion of all dilutive potential equity shares.

Potential equity shares are deemed to be dilutive only if their conversion to equity shares would decrease the net profit per share or increase the net loss per share. Potential dilutive equity shares are deemed to be converted as at the beginning of the period, unless they have been issued at a later date. Dilutive potential equity shares are determined independently for each period presented.

Provisions and onerous contracts Provisions are recognised when we have a present legal or constructive obligation as a result of past events, it is probable that an outflow of resources will be required to settle the obligation and the amount can reliably estimated. Provisions are not recognised for future operating losses. Provisions are measured at the present value of management’s best estimate of the expenditure required to settle the present obligation at the end of the reporting period. The discount rate used to determine the present value is pre-tax rate that reflects current market assessments of the time value of money and the risks specific to the liability. The increase in provision due to the passage of time is recognised as an expense.

A provision for onerous contract is recognised when the expected benefits to be derived by us from a contract are lower than the unavoidable cost of meeting its obligations under the contract. The provision is measured at the present value of the lower of expected cost of terminating the contract and the expected net cost of 558continuing with the contract. Before a provision is established, our Company recognizes any impairment loss on the assets associate with the contract.

Use of judgements and estimates The preparation of financial statements in conformity with Ind AS requires estimates and judgements that affect the reported amounts of assets and liabilities, revenues and expenses, and related disclosures of contingent liabilities in the financial statements and accompanying notes. Estimates are used for, but not limited to useful lives of property, plant and equipment, accounting for right-of-use assets, impairment of goodwill and investments in associate and joint ventures, and estimation of and recoverability of deferred tax balances. Actual results could differ materially from these estimates.

In preparing these consolidated financial statements, management has made judgements and estimates that affect the application of our accounting policies and the reported amounts of assets, liabilities, income and expenses. Actual results may differ from these estimates.

Estimates and underlying assumptions are reviewed on an ongoing basis. Revisions to estimates are recognised prospectively.

Judgements Information about judgements made in applying accounting policies that have the most significant effects on

the amounts recognised in the financial statements is included in the following notes:

Note 7: investments accounted for using the equity method: whether we have significant influence over an investee;

Note 5: lease term: whether we are reasonably certain to exercise extension options.

Assumption and estimation uncertainties Information about assumptions and estimation uncertainties at the reporting date that have a risk of resulting in a material adjustment to the carrying amounts of assets and liabilities within the next financial year is

included in the following notes:

Note 17: measurement of defined benefit obligations: key actuarial assumptions;

Note 39: recognition of deferred tax assets: availability of future taxable profit against which deductible temporary differences and tax losses carried forward can be utilised;

Note 30: uncertain tax treatments;

Note 42: determining the fair value less costs to sell of the disposal Group on the basis of significant unobservable inputs;

Note 6: impairment test of intangible assets and goodwill: key assumptions underlying recoverable amounts, including the recoverability of development costs;

Notes 11 and 30: recognition and measurement of provisions and contingencies: key assumptions about the likelihood and magnitude of an outflow of resources;

Note 9 (ii): measurement of ECL allowance for trade receivables: key assumptions in determining the weighted-average loss rate; and Notes 33: acquisition of subsidiary: fair value of the consideration transferred (including contingent consideration) and fair value of the assets acquired and liabilities assumed, measured on a provisional basis.

Changes in material accounting policies Deferred tax related to assets and liabilities arising from a single transaction We have adopted Deferred Tax related to Assets and Liabilities arising from a Single Transaction (Amendments to Ind AS 12) from April 1, 2024. The amendments narrow the scope of the initial recognition exemption to exclude transactions that give rise to equal and offsetting differences – e.g., leases. For leases and decommissioning liabilities, an entity is required to recognise the associated deferred tax assets and liabilities from the beginning of the earliest comparative period presented, with any cumulative effect recognised as an adjustment to retained earnings or other components of equity at that date. For all other transactions, an entity applies the amendments to transactions that occur on or after the beginning of the earliest period presented.

559We previously accounted for deferred tax on leases by applying the ‘integrally linked’ approach, resulting in a similar outcome as under the amendments, except that the deferred tax asset or liability was recognised on a net basis. Following the amendments, we have recognised a separate deferred tax asset in relation to its lease liabilities and a deferred tax liability in relation to its right to-use assets as at April 1, 2021 and thereafter. However, there was no impact on the balance sheet because the balances qualify for offset under paragraph 74 of Ind AS 12. There was also no impact on the opening retained earnings as at April 1, 2021as a result of the change. The key impact for us relate to disclosure of the deferred tax assets and liabilities recognised in Note 39.

Key Components of our Restated Consolidated Statement of Profit and Loss

The key components of our restated consolidated statement of profit and loss are described below:

Income Revenue from operations. Revenue from operations comprise revenue from sale of manufactured goods (primarily from sale of manufactured goods across our aerospace and consumer product portfolio), sale of services (primarily from support services provided to customers) and other operating income (primarily from sale of scrap).

Other income. Other income comprises government grant (Merchandise Exports from India Scheme), liabilities no longer required written back, dividend income, gain on derecognition of lease, net gain on disposal of property, plant and equipment, exchange difference (other than on borrowings), interest income, unwinding of discount on security deposit, interest income under the effective interest method on deferred consideration, financial guarantee income, gain on mutual funds and miscellaneous income.

Expenses Cost of materials consumed. Cost of materials consumed comprise the sum of opening stock for the year, purchases during the year and inventories pertaining to entities acquired, less movement in provision for slow moving inventory and closing stock for the year.

Changes in inventories of finished goods and work-in-progress. Changes in inventories of finished goods and work-in-progress consists of net increases or decreases in inventories of finished goods and work-in-progress.

Purchases of stock-in-trade. Purchases of stock-in-trade comprises traded consumer products, a non-recurring item appearing on the financial statements of our subsidiary, Aequs Consumer Products Private Limited.

Employee benefits expense. Employee benefits expenses comprises salaries, wages and bonus, contribution to provident and other funds, employee stock option expense, leave compensation, gratuity, and staff welfare expenses.

Impairment losses on financial assets. Impairment losses on financial assets comprise provisions created against financial assets.

Other expenses. Other expenses comprises consumption of subcontracting expenses, stores and spare parts, power and fuel, insurance, repairs and maintenance (including towards machinery, building and others), legal and professional fees, payment to auditors, rental charges, printing and stationery, freight and forwarding, rates and taxes, travelling and conveyance, communication, advertising and sales promotion, royalty fee, bank charges, loss on disposal of property, plant and equipment/investment property (net), expenditure on corporate social responsibility, net foreign exchange loss (other than on borrowings), share issue expenses of subsidiaries, provision for doubtful advances & advances written off, and miscellaneous expenses.

Finance cost. Finance cost comprises interest expense on working capital borrowings, term loan and others, exchange differences (on borrowings), financial guarantee expense, interest expense on lease liabilities.

Depreciation and amortisation expense. Depreciation and amortisation expense comprises depreciation of property, plant and equipment, amortisation of intangible assets, depreciation on investment property and depreciation of right-of-use assets.

Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax. Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax comprises our Company’s share of profits arising from joint ventures, based on our percentage of shareholding of such joint 560ventures.

Exceptional items loss/(gain). Exceptional items loss/(gain) comprises impairment loss on goodwill, impairment loss on receivable from related parties, impairment loss on loans receivable from related parties, and gain on sale of investment property.

Income tax expense. Our tax expenses include current tax expenses and deferred tax expenses.

Discontinued operations. Discontinued operations of certain of our entities, and the resulting profit/(loss) from discontinued operations after tax.

Our Results of Operations The following table sets forth select financial data from our Restated Consolidated Financial Information for the six months period ended September 30, 2025 and 2024 and the Financial Year 2025, 2024 and 2023, the

components of which are also expressed as a percentage of total income for such years:

Particulars For the six months period ended September 30 2025 2024 (₹ in million) (% of Total (₹ in million) (% of Total Income) Income) Continuing operations Revenue from operations 5,371.59 94.98% 4,589.73 96.52% Other income 283.86 5.02% 165.33 3.48% Total Income 5,655.45 100.00% 4,755.06 100.00% Expenses Cost of materials consumed 2,328.94 41.18% 2,285.19 48.06% Purchases of stock-in-trade - - - - Changes in inventories of finished goods and (154.35) (2.73%) (314.98) (6.62%) work-in-progress Employee benefits expense 927.57 16.40% 762.12 16.03% Impairment losses/(reversal) on financial assets 2.26 0.04% (9.00) (0.19)% Other expenses 1,709.97 30.24% 1,453.51 30.57% Total Expenses 4,814.39 85.13% 4,176.84 87.84% Earnings from continuing operations before 841.06 14.87% 578.22 12.16% finance cost, depreciation and amortisation, share of profit/(loss) of associate and joint ventures, exceptional items and tax Finance costs 357.51 6.32% 278.59 5.86% Depreciation and amortisation expense 571.55 10.11% 529.20 11.13% Loss from continuing operations before (88.00) (1.56%) (229.57) (4.83%) exceptional items, share of profit/(loss) of associate and joint ventures, and tax Share of net profit/(loss) of associate and joint 33.83 0.60% 53.16 1.12% ventures accounted for using the equity method, net of tax Exceptional items gain/(loss) - - (482.65) (10.15% Loss before tax from continuing operations (54.17) (0.96%) (659.06) (13.86%) Income Tax expense Current tax 109.91 1.94% 67.58 1.42% Deferred tax 2.76 0.05% (10.53) (0.22%) Total tax expense 112.67 1.99% 57.05 1.20% Loss from continuing operations (166.84) (2.95%) (716.11) (15.06%) Discontinued operations

(Loss)/profit from discontinued operations (2.93) (0.05%) (0.89) (0.02%) before tax

(Loss)/profit from discontinued operations (2.93) (0.05%) (0.89) (0.02%) after tax Loss for the period/year (169.77) (3.00%) (717.00) (15.08%) 561Particulars Financial Year ended March 31, 2025 2024 2023 (₹ in (% of Total (₹ in (% of Total (₹ in (% of Total million) Income) million) Income) million) Income) Continuing operations Revenue from 9,246.06 96.39% 9,650.74 97.65% 8,121.32 96.62% operations Other income 346.07 3.61% 232.30 2.35% 284.07 3.38% Total Income 9,592.13 100.00% 9,883.04 100.00% 8,405.39 100.00% Expenses Cost of materials 4,082.60 42.56% 4,390.72 44.43% 4,168.95 49.60% consumed Purchases of stock-in- - - - - 20.70 0.25% trade Changes in inventories (160.60) (1.67%) (224.67) (2.27%) (349.24) (4.15%) of finished goods and work-in-progress Employee benefits 1,587.41 16.55% 1,434.08 14.51% 1,446.39 17.21% expense Impairment losses on 4.16 0.04% 14.63 0.15% 8.54 0.10% financial assets Other expenses 2,998.87 31.26% 2,813.18 28.46% 2,479.49 29.50% Total Expenses 8,512.44 88.74% 8,427.94 85.28% 7,774.83 92.50% Earnings from 1,079.69 11.26% 1,455.10 14.72% 630.56 7.50% continuing operations before finance cost, depreciation and amortisation, share of profit/(loss) of associate and joint ventures, exceptional items and tax Finance costs 589.01 6.14% 638.06 6.46% 646.07 7.69% Depreciation and 1,034.06 10.78% 1,076.85 10.90% 995.16 11.84% amortisation expense Loss from continuing (543.38) (5.66%) (259.81) (2.63%) (1,010.67) (12.02%) operations before exceptional items, share of profit/(loss) of associate and joint ventures, and tax Share of net profit/(loss) 85.24 0.89% 51.52 0.52% (8.74) (0.10%) of associate and joint ventures accounted for using the equity method, net of tax Exceptional items (482.65) (5.03%) 186.48 1.89% (7.36) (0.09%) gain/(loss) Loss before tax from (940.79) (9.81%) (21.81) (0.22%) (1,026.77) (12.22%) continuing operations Income Tax expense Current tax 148.88 1.55% 115.13 1.16% 12.02 0.15% Deferred tax (65.48) (0.68%) (15.47) (0.16%) 48.47 0.58% Total tax expense 83.40 0.87% 99.66 1.01% 60.49 0.72% Loss from continuing (1,024.19) (10.68%) (121.47) (1.23%) (1,087.26) (12.94%) operations Discontinued operations

(Loss)/profit from 0.73 0.01% (20.97) (0.21%) (7.69) (0.09%) discontinued operations before tax

(Loss)/profit from 0.73 0.01% (20.97) (0.21%) (7.69) (0.09%) discontinued operations after tax Loss for the year (1,023.46) (10.67%) (142.44) (1.44%) (1,094.95) (13.03%) 562Six months period ended September 30, 2025 as compared to six months period ended September 30, 2024 Our results of operations for the six months period ended September 30, 2025 compared to the six months period ended September 30, 2024 were primarily driven by an increase in revenue from the Aerospace Segment.

Income

Revenue from operations: Our revenue from operations increased by 17.03% to ₹5,371.59 million for the six months period ended September 30, 2025 from ₹4,589.73 million for the six months period ended September 30, 2024, primarily due to an increase in revenue from contracts with customers to ₹5,202.11 million for the six months period ended September 30, 2025 from ₹4,466.15 million for the six months period ended September 30,

2024. The increase in our revenue from contracts with customers was primarily attributable to an increase in our sale of manufactured goods to ₹5,185.25 million for the six months period ended September 30, 2025 from ₹4,451.10 million for the six months period ended September 30, 2024, mainly on account of an increase in revenue from the Aerospace Segment, due to an increase in order volume from customers in the Aerospace Segment. While our net external revenue from Aerospace segment increased by ₹792.30 million to ₹4,739.53 million for the six months period ended September 30, 2025 from ₹3,947.23 million for the six months period ended September 30, 2024, our net external revenue from Consumer Segment decreased slightly by ₹10.44 million to ₹632.06 million for the six months period ended September 30, 2025 from ₹642.50 million for the six months period ended September 30, 2024.

Other income. Other income increased by 71.69% to ₹283.86 million for the six months period ended September 30, 2025 from ₹165.33 million for the six months period ended September 30, 2024, primarily due to increases in

(i) exchange difference (other than borrowings) to ₹191.00 million for the six months period ended September 30, 2025 from ₹46.81 million for the six months period ended September 30, 2024, on account of foreign exchange fluctuation differences, and (ii) government grant to ₹5.34 million for the six months period ended September 30, 2025 from nil for the six months period ended September 30, 2024, on account of the recognition of government grant income under the “Special incentive package for investment in toy cluster” scheme of the Karnataka State Government during the six months period ended September 30, 2025. The increase was partially offset by a decrease in gain on mutual funds to nil for the six months period ended September 30, 2025 from ₹17.09 million for the six months period ended September 30, 2024, on account of no investments in mutual funds made during the six months period ended September 30, 2025.

Expenses Cost of materials consumed. Cost of materials consumed decreased by 1.91% to ₹2,328.94 million for the six months period ended September 30, 2025 from ₹2,285.19 million for the six months period ended September 30, 2024, primarily on account of an increase in proportion of revenue from the Aerospace Segment as a percentage of total revenue from operations during the six months period ended September 30, 2025. Our cost of materials consumed, as a percentage of total income, aggregated to 41.18% for the six months period ended September 30, 2025 as compared to 48.06% for the six months period ended September 30, 2024. It was primarily driven by a change in revenue mix, due to the significant increase in revenue from the Aerospace Segment and the slight decrease in revenue from the Consumer Segment during the six months ended September 30, 2025.

Changes in inventories of finished goods and work-in-progress: Changes in inventories of finished goods and work-in-progress was ₹(154.35) million for the six months period ended September 30, 2025 compared to ₹(314.98) million for the six months period ended September 30, 2024. For the six months period ended September 30, 2025, our inventory at the beginning of the six months period ended September 30, 2025 was ₹2,307.10 million and our inventory at the end of the six months period ended September 30, 2025 was ₹2,537.49 million. The exchange difference during the six months period ended September 30, 2025 was ₹35.08 million.

Employee benefits expenses. Employee benefits expenses increased by 21.71% to ₹927.57 million for the six months period ended September 30, 2025 from ₹762.12 million for the six months period ended September 30, 2024, primarily due to increases in (i) salaries, wages and bonus to ₹759.88 million for the six months period ended September 30, 2025 from ₹619.12 million for the six months period ended September 30, 2024, and (ii) contribution to provident and other funds to ₹99.99 million for the six months period ended September 30, 2025 from ₹78.85 million for the six months period ended September 30, 2024. We had 1,892 permanent on-roll employees (including permanent on-roll employees from our joint ventures) as of September 30, 2025 compared to 1,780 permanent on-roll employees (including permanent on-roll employees from our joint ventures) as of September 30, 2024, on account of an increase in employee headcount in our consumer electronics business.

563Impairment losses on financial assets. Impairment losses on financial assets increased to ₹2.26 million in the six months period ended September 30, 2025 from ₹(9.00) million in the six months period ended September 30, 2024, primarily due to the realization of aged receivables during the six months period ended September 30, 2024.

Other expenses. Other expenses increased by 17.64% to ₹1,709.97 million for the six months period ended September 30, 2025 from ₹1,453.51 million for the six months period ended September 30, 2024 primarily due to increases in (i) subcontracting expenses to ₹727.06 million for the six months period ended September 30, 2025 from ₹601.55 million for the six months period ended September 30, 2024, (ii) consumption of stores and spare parts to ₹282.89 million for the six months period ended September 30, 2025 from ₹227.83 million for the six months period ended September 30, 2024, and (iii) legal and professional fees to ₹107.24 million for the six months period ended September 30, 2025 from ₹69.59 million for the six months period ended September 30,

2024. All of the above increases in expenses were in line with the increase in revenue from operations during the six months period ended September 30, 2025.

Finance costs. Finance costs increased by 28.33% to ₹357.51 million for the six months period ended September 30, 2025 from ₹278.59 million for the six months period ended September 30, 2024, primarily due to increases in

(i) exchange difference (on borrowings) to ₹57.98 million for the six months period ended September 30, 2025 from ₹7.02 million for the six months period ended September 30, 2024, mainly on account of foreign exchange fluctuations and differences, (ii) interest expense – others to ₹63.69 million for the six months period ended September 30, 2025 from ₹22.13 million for the six months period ended September 30, 2024, mainly on account of an increase in bill discounting charges during the six months period ended September 30, 2025.

Depreciation and amortisation expenses. Depreciation and amortisation expense increased by 8.00% to ₹571.55 million for the six months period ended September 30, 2025 from ₹529.20 million for the six months period ended September 30, 2024, primarily due to an increase in depreciation of property, plant and equipment to ₹254.68 million for the six months period ended September 30, 2025 from ₹183.66 million for the six months period ended September 30, 2024, mainly on account of additional capitalization in Aequs Consumer Products Private Limited during the six months period ended September 30, 2025.

Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax. Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax decreased to ₹33.83 million for the six months period ended September 30, 2025 from ₹53.16 million for the six months period ended September 30, 2024, primarily due to loss recognized in Aequs Cookware Private Limited during the six months period ended September 30, 2025.

Exceptional items gain/(loss). Exceptional items loss of ₹482.65 million in the six months period ended September 30, 2024 was on account of impairment loss on goodwill. There was no exceptional items gain / (loss) during the six months period ended September 30, 2025.

Income tax expenses. Income tax expenses increased by 97.49% to ₹112.67 million for the six months period ended September 30, 2025 from ₹57.05 million for the six months period ended September 30, 2024, primarily due to an increase in current tax to ₹109.91 million for the six months period ended September 30, 2025 from ₹67.58 million for the six months period ended September 30, 2024, on account of an increase in tax provision of Aerostructures Manufacturing India Private Limited during the six months period ended September 30, 2025.

Discontinued operations. Our profit/(loss) from discontinued operations after tax increased to a loss of ₹(2.93) million for the six months period ended September 30, 2025 from a loss of ₹(0.89) million for the six months period ended September 30, 2024, primarily attributable to loss recognized in Aequs Toys Hong Kong Private Limited during the six months period ended September 30, 2025.

Loss for the period. As a result of the foregoing, our loss for the period decreased to ₹169.77 million for the six months period ended September 30, 2025 from ₹717.00 million for the six months period ended September 30,

2024.

Financial Year 2025 compared to Financial Year 2024 Our results of operations for the Financial Year 2025 compared to the Financial Year 2024 were primarily driven by a decrease in revenue from the Consumer Segment, resulting in an overall decline in revenue from operations.

564Income

Revenue from operations: Our revenue from operations decreased by 4.19% to ₹9,246.06 million for the Financial Year 2025 from ₹9,650.74 million for the Financial Year 2024, primarily due to a decrease in revenue from contracts with customers to ₹8,979.63 million during the Financial Year 2025 from ₹9,411.92 million during the Financial Year 2024. The decrease in our revenue from contracts with customers was primarily attributable to a decrease in our sale of manufactured goods to ₹8,949.54 million for the Financial Year 2025 from ₹9,401.18 million for the Financial Year 2024, mainly on account of decline in revenue from the Consumer Segment, due to a general slowdown in market demand for our consumer products. While our gross revenue from Aerospace Segment increased by ₹776.79 million to ₹9,092.54 million for the Financial Year 2025 from ₹8,315.75 million for the Financial Year 2024, our net external revenue from the Consumer Segment decreased by ₹1,110.88 million to ₹1,075.08 million from ₹2,185.96 million, leading to a decrease in revenue from contracts with customers due to a relatively larger decrease in revenue from the Consumer Segment. The decrease in revenue from contracts with customers was also due to a decrease in revenue from our cookware business (which forms part of our consumer durables product line), on account of a transfer of our cookware business to a new joint venture, Aequs Cookware Private Limited, in October 2024, resulting in a decrease in revenue from our cookware business during the period between November 2024 to March 2025. The decrease in sale of manufactured goods was partially offset by an increase in sale of services to ₹30.09 million for the Financial Year 2025 from ₹10.74 million for the Financial Year 2024, mainly on account of increase in support service fees income from our Joint Venture.

Other income. Other income increased by 48.98% to ₹346.07 million for the Financial Year 2025 from ₹232.30 million for the Financial Year 2024, primarily due to increases in (i) government grant to ₹94.96 million in Financial Year 2025 from nil for the Financial Year 2024, on account of recognition of government grant income under the “Special Incentive Package for investment in Toy Cluster” scheme introduced by the State Government of Karnataka, for Financial Year 2025, (ii) exchange difference (other than borrowings) to ₹52.27 million in Financial Year 2025 from ₹33.36 million for the Financial Year 2024, on account of foreign exchange fluctuations and differences, (iii) gain on mutual funds to ₹23.74 million for the Financial Year 2025 from ₹3.58 million for the Financial Year 2024 on account of an increase in investment in mutual funds for the Financial Year 2025, (iv) gain on derecognition of lease to ₹18.59 million for the Financial Year 2025 from nil for the Financial Year 2024 on account of gain on derecognition of lease in our subsidiary, Aequs Force Consumer Products Private Limited, for the Financial Year 2025. The increase was partially offset by decreases in (i) liabilities no longer required written back to ₹21.07 million for the Financial Year 2025 from ₹29.97 million for the Financial Year 2024, on account of reversal of provision in our subsidiary, Aequs Aerospace France SAS, for the Financial Year 2024;

and (ii) miscellaneous income to ₹16.72 million for the Financial Year 2025 from ₹49.91 million for the Financial Year 2024, on account of grant income recorded by our subsidiary, Aequs Aerospace France SAS, for the Financial Year 2024, which was not received in Financial Year 2025.

Expenses Cost of materials consumed. Cost of materials consumed decreased by 7.02% to ₹4,082.60 million for the Financial Year 2025 from ₹4,390.72 million for the Financial Year 2024, primarily on account of a decrease in our consumption of raw materials due to decrease in sale of products within the Consumer Segment, in line with the decrease in revenue from our Consumer Segment during the Financial Year 2025. Our cost of materials consumed, as a percentage of total income, aggregated to 42.56% for the Financial Year 2025 as compared to

44.43% for the Financial Year 2024. It was primarily driven by a change in revenue mix as the increase in revenue from the Aerospace Segment was higher in the Financial Year 2025 as compared to the Consumer Segment.

Changes in inventories of finished goods and work-in-progress: Changes in inventories of finished goods and work-in-progress was ₹(160.60) million for the Financial Year 2025 compared to ₹(224.67) million for the Financial Year 2024. For the Financial Year 2025, our inventory at the end of the Financial Year 2024 was ₹1,996.66 million and our inventory at the end of the Financial Year 2025 was ₹2,307.10 million. The exchange difference during the Financial Year 2025 was ₹28.75 million.

Employee benefits expenses. Employee benefits expenses increased by 10.69% to ₹1,587.41 million for the Financial Year 2025 from ₹1,434.08 million for the Financial Year 2024, primarily due to increases in (i) salaries, wages and bonus to ₹1,295.49 million for the Financial Year 2025 from ₹1,164.14 million for the Financial Year 2024, (ii) contribution to provident and other funds to ₹169.34 million for the Financial Year 2025 from ₹143.40 million for the Financial Year 2024, and (iii) staff welfare expenses to ₹73.45 million for the Financial Year 2025 from ₹69.58 million for the Financial Year 2024. We had 1,785 permanent on-roll employees (including permanent on-roll employees from our joint ventures) as of March 31, 2025 compared to 1,587 permanent on-roll 565employees (including permanent on-roll employees from our joint ventures) as of March 31, 2024, on account of recruitment of employees for our consumer electronics business.

Impairment losses on financial assets. Impairment losses on financial assets decreased by 71.57% to ₹4.16 million in Financial Year 2025 from ₹14.63 million in Financial Year 2024, primarily due to additional provisions made in the books of our subsidiary, Aequs Aero Machine Inc. against trade receivables for the Financial Year 2024, which were not required in Financial Year 2025.

Other expenses. Other expenses increased by 6.60% to ₹2,998.87 million for the Financial Year 2025 from ₹2,813.18 million for the Financial Year 2024 primarily due to increases in (i) consumption of spares and components to ₹475.02 million for the Financial Year 2025 from ₹441.98 million for the Financial Year 2024,

(ii) legal and professional fees to ₹180.52 million for the Financial Year 2025 from ₹133.46 million for the Financial Year 2024, (iii) freight & forwarding to ₹148.40 million for the Financial Year 2025 from ₹114.58 million for the Financial Year 2024, (iv) repairs and maintenance – others to ₹147.37 million for the Financial Year 2025 from ₹85.00 million for the Financial Year 2024, and (v) miscellaneous expenses to ₹57.27 million for the Financial Year 2025 from ₹27.26 million for the Financial Year 2024. All of the above increases in expenses were in line with the increase in revenue from the Aerospace Segment during the Financial Year 2025.

Finance costs. Finance costs decreased by 7.69% to ₹589.01 million for the Financial Year 2025 from ₹638.06 million for the Financial Year 2024, primarily due to decreases in (i) interest expense on lease liabilities of ₹276.94 million for the Financial Year 2025 from ₹303.76 million for the Financial Year 2024, mainly on account of derecognition of lease in our subsidiary, Aequs Force Consumer Products Private Limited, for the Financial Year 2025; and (ii) interest expense on working capital borrowings to ₹130.50 million for the Financial Year 2025 from ₹143.35 million for the Financial Year 2024, mainly on account of reduction of interest rate on cash credit loan for the Financial Year 2025 and higher utilization of pre-shipment credit in foreign currency with lower interest rate for the Financial Year 2025. This decrease was partially offset by an increase in exchange differences (on borrowings) to ₹57.38 million for the Financial Year 2025 from ₹43.60 million for the Financial Year 2024, mainly on account of substantial foreign exchange fluctuations on our borrowings during the year.

Depreciation and amortisation expenses. Depreciation and amortisation expense decreased by 3.97% to ₹1,034.06 million for the Financial Year 2025 from ₹1,076.85 million for the Financial Year 2024, primarily due to decreases in (i) depreciation on right-of-use assets of ₹624.86 million for the Financial Year 2025 from ₹643.89 million for the Financial Year 2024 on account of derecognition of lease in our subsidiary, Aequs Force Consumer Products Private Limited, for the Financial Year 2025 and (ii) depreciation of property, plant and equipment of ₹368.98 million for the Financial Year 2025 from ₹382.28 million for the Financial Year 2024, on account of the expiry of the useful life of certain assets.

Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax. Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax increased to ₹85.24 million for the Financial Year 2025 from ₹51.52 million for the Financial Year 2024, primarily due to the growth in business and higher profitability of our Joint Ventures, Aerospace Processing India Private Limited and SQuAD Forging India Private Limited, which was partially offset by a loss of ₹(27.53) million in our joint venture, Aequs Cookware Private Limited, during the Financial Year 2025.

Exceptional items gain/(loss). Exceptional items gain of ₹186.48 million in Financial Year 2024 was on account of gain on sale of a building by our subsidiary, Aequs Aerospace France SAS, to a third party. Exceptional item loss of ₹482.65 million in Financial Year 2025 was on account of impairment loss on goodwill due to decline in revenue of our subsidiary in the Consumer Segment, Aequs Force Consumer Products Private Limited.

Income tax expenses. Income tax expenses decreased by 16.32% to ₹83.40 million for the Financial Year 2025 from ₹99.66 million for the Financial Year 2024, primarily due to increase in deferred tax to ₹(65.48) million for the Financial Year 2025 from ₹(15.47) million for the Financial Year 2024 on account of lower income tax expense in some of the profitable subsidiaries on account of lower profits whereas for many of the subsidiaries which are loss making, the Group has not recognized any deferred tax benefits as yet.

Discontinued operations. Our profit/(loss) from discontinued operations after tax increased to a profit of ₹0.73 million for the Financial Year 2025 from a loss of ₹(20.97) million for the Financial Year 2024, primarily attributable to the discontinuation of operations of our subsidiary, Aequs Toys Hong Kong Private Limited, during Financial Year 2024, which helped us eliminate recurring losses that affected our results of operations in Financial Year 2024.

566Loss for the year. As a result of the foregoing, our loss for the year increased significantly to ₹1,023.46 million for the Financial Year 2025 from ₹142.44 million for the Financial Year 2024.

Financial Year 2024 compared to Financial Year 2023 Our results of operations for the Financial Year 2024 compared to the Financial Year 2023 were primarily driven by an overall growth in sales volume of products in our Aerospace Segment, both in India and overseas.

Income

Revenue from operations: Our revenue from operations increased by 18.83% to ₹9,650.74 million for the Financial Year 2024 from ₹8,121.32 million for the Financial Year 2023, primarily due to increase in revenue from contracts with customers to ₹9,411.92 million for the Financial Year 2024 from ₹7,914.72 million from the Financial Year 2023, and other operating income to ₹238.82 million for the Financial Year 2024 from ₹206.60 million for the Financial Year 2023. The increase in our revenue from contracts with customers was primarily attributable to an increase in our sale of manufactured goods to ₹9,401.18 million for the Financial Year 2024 from ₹7,901.43 million for the Financial Year 2023, mainly on account of an increase in volume of products sold within the Aerospace Segment during the Financial Year 2024, driven by new orders placed by customers and an increase in commercial aircraft build rates for existing orders during the Financial Year 2024. This increase in volume of products sold in the Aerospace Segment was partially offset by a decrease in volume of toys sold during the Financial Year 2024, driven by a decrease in overall volume of consumer products sold by some of our customers in the Consumer Segment.

Other income. Other income decreased by 18.22% to ₹232.30 million for the Financial Year 2024 from ₹284.07 million for the Financial Year 2023, primarily due to decreases in (i) exchange difference (other than on borrowings) to ₹33.36 million in Financial Year 2024 from ₹95.92 million from Financial Year 2023, on account of foreign exchange fluctuations and differences, (ii) liabilities no longer required written back to ₹29.97 million for the Financial Year 2024 from ₹58.12 million for the Financial Year 2023, on account of a decrease in dividend income received by our Company to nil for the Financial Year 2024 from ₹12.25 million for the Financial Year 2023, and (iii) gain on derecognition of lease to nil for the Financial Year 2024 from ₹18.84 million for the Financial Year 2023 on account of a decrease in gain on derecognition of lease in our subsidiary, Aequs Force Consumer Products Private Limited, during the Financial Year 2023.

Expenses Cost of materials consumed. Cost of materials consumed increased by 5.32% to ₹4,390.72 million for the Financial Year 2024 from ₹4,168.95 million for the Financial Year 2023, primarily due to an increase in our consumption of raw materials due to increase in sale of products within the Aerospace Segment during the Financial Year 2024. Our cost of materials consumed, as a percentage of total income, aggregated to 44.43% for the Financial Year 2024 as compared to 49.60% for the Financial Year 2023. It was primarily driven by a change in revenue mix as increase in revenue of the Aerospace Segment was higher in Financial Year 2024 as compared to the consumer segment.

Purchases of stock-in-trade. Purchases of stock-in-trade decreased to nil for the Financial Year 2024 from ₹20.70 million for the Financial Year 2023, primarily due to a decrease in purchase of traded consumer products during the Financial Year 2024 due to our in-house production of such consumer products.

Changes in inventories of finished goods and work-in-progress: Changes in inventories of finished goods and work-in-progress was ₹(224.67) million for the Financial Year 2024 compared to ₹(349.24) million for the Financial Year 2023. For the Financial Year 2024, our inventory at the end of the Financial Year 2023 was ₹1,761.32 million and our inventory at the end of the Financial Year 2024 was ₹1,996.66 million. The exchange difference during the Financial Year 2024 was ₹48.65 million.

Employee benefits expenses. Employee benefits expenses decreased slightly by 0.85% to ₹1,434.08 million for the Financial Year 2024 from ₹1,446.39 million for the Financial Year 2023, primarily attributable to decreases in (i) salaries, wages and bonus to ₹1,164.14 million for the Financial Year 2024 from ₹1,196.94 million for the Financial Year 2023, (ii) staff welfare expenses to ₹69.58 million for the Financial Year 2024 from ₹76.19 million for the Financial Year 2023, and (iii) employee stock option expense to ₹20.68 million for the Financial Year 2024 from ₹24.05 million for the Financial Year 2023. We had 1,587 permanent on-roll employees (including permanent on-roll employees from our joint ventures) as of March 31, 2024 compared to 1,403 permanent on-roll 567employees (including permanent on-roll employees from our joint ventures) as of March 31, 2023, due to intake of employees in our consumer electronics business.

Impairment losses on financial assets. Impairment losses on financial assets increased by 71.31% to ₹14.63 million in Financial Year 2024 from ₹8.54 million in Financial Year 2023, primarily due to additional provisions made in the books of our subsidiary, Aequs Aero Machine Inc. against trade receivables.

Other expenses. Other expenses increased by 13.46% to ₹2,813.18 million for the Financial Year 2024 from ₹2,479.49 million for the Financial Year 2023 primarily due to increases in (i) subcontracting expenses, to ₹1,186.03 million for the Financial Year 2024 from ₹1,023.85 million for the Financial Year 2023, (ii) consumption of stores and spare parts to ₹441.98 million for the Financial Year 2024 from ₹347.78 million for the Financial Year 2023, and (iii) power and fuel to ₹294.49 million for the Financial Year 2024 from ₹254.67 million for the Financial Year 2023. These increases were in line with the growth of our business and increase in revenue from operations during the Financial Year 2024.

Finance costs. Finance costs decreased slightly by 1.24% to ₹638.06 million for the Financial Year 2024 from ₹646.07 million for the Financial Year 2023, primarily attributable to a decrease in exchange differences (on borrowings) of ₹43.60 million for the Financial Year 2024 from ₹145.73 million for the Financial Year 2023, mainly on account of the impact of foreign exchange fluctuations on our borrowings during the year. This decrease is partially offset by an increase in interest expense on lease liabilities to ₹303.76 million for the Financial Year 2024 from ₹240.03 million for the Financial Year 2023, mainly on account of an increase in leased space for our consumer segment during the year.

Depreciation and amortisation expenses. Depreciation and amortisation expense increased by 8.21% to ₹1,076.85 million for the Financial Year 2024 from ₹995.16 million for the Financial Year 2023, primarily attributable to increases in (i) depreciation on right-of-use assets of ₹643.89 million for the Financial Year 2024 from ₹588.91 million for the Financial Year 2023 and (ii) depreciation of property, plant and equipment of ₹382.28 million for the Financial Year 2024 from ₹337.48 million for the Financial Year 2023, on account of addition of plant, property, equipment and right-of-use assets during the year.

Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax. Share of net profit/(loss) of associate and joint ventures accounted for using the equity method, net of tax increased to ₹51.52 million for the Financial Year 2024 from ₹(8.74) million for the Financial Year 2023, primarily attributable to our joint venture, SQuAD Forging India Private Limited, reporting profits during the Financial Year 2024.

Exceptional items gains/(loss). Exceptional items gain/(loss) increased to ₹186.48 million for the Financial Year 2024 from ₹7.36 million for the Financial Year 2023, primarily attributable to an increase in gain on sale of investment property to ₹186.48 million for the Financial Year 2024 from nil for the Financial Year 2023 on account of sale of investment property from Sci Du Champ De Pivoines (step-down subsidiary of our Company and subsidiary of Aequs Aerospace France SAS) to a third party.

Income tax expenses. Income tax expenses increased by 64.75% to ₹99.66 million for the Financial Year 2024 from (₹60.49) million for the Financial Year 2023, primarily due to increase in current tax to ₹115.13 million for the Financial Year 2024 from ₹12.02 million for the Financial Year 2023 on account of an increase in taxable profit in our subsidiary, Aerostructures Manufacturing India Private Limited.

Discontinued operations. Our (loss)/profit from discontinued operations after tax increased to a loss of ₹(20.97) million for the Financial Year 2024 from a loss of ₹(7.69) million for the Financial Year 2023, primarily attributable to the discontinuation of operations of our subsidiary, Aequs Toys Hong Kong Private Limited, during Financial Year 2024.

Loss for the year. As a result of the foregoing, our loss for the year decreased by 86.99% to ₹142.44 million for the Financial Year 2024 from ₹1,094.95 million for the Financial Year 2023.

Liquidity and Capital Resources Our primary source of liquidity is cash generated from operations and term loans from banks, among other things.

As of September 30, 2025, we had cash and cash equivalents of ₹571.93 million and bank balances other than cash and cash equivalents of ₹226.31 million.

Our financing requirements are primarily for working capital and investments in our business such as capital expenditure. We evaluate our funding requirements periodically in light of our net cash flow from operating 568activities and the requirements of our business and operations.

Cash Flows The following table summarizes our cash flows for the six months period ended September 30, 2025 and 2024 and the Financial Years 2025, 2024 and 2023:

Particulars For the six months Financial Year period ended September 30, 2025 2024 2025 2024 2023 (₹ in million) Net cash generated/(used in) from operating 479.02 (117.27) 261.41 (191.08) 98.11 activities Net cash (used) in investing activities (2,036.73) (297.86) (738.20) (3,433.68) (888.50) Net cash generated from financing activities 1,659.95 316.07 254.01 3,934.90 543.74 Net increase/(decrease) in cash and cash 102.24 (99.06) (222.78) 310.14 (246.65) equivalents Cash and cash equivalents at the beginning of 609.43 792.74 792.74 512.87 825.90 the period/year Effects of exchange rate changes on cash and cash (139.74) (36.51) 39.47 (30.27) (66.38) equivalents Cash and cash equivalents at the end of the 571.93 657.17 609.43 792.74 512.87 period/year Operating Activities Net cash flows generated from operating activities was ₹479.02 million for the six months period ended September 30, 2025. We had loss before tax of ₹(57.10) million for the six months period ended September 30, 2025, which was primarily adjusted for depreciation and amortisation expense of ₹571.55 million and finance cost of ₹351.36 million. This was further adjusted for working capital changes, including increase in inventories of ₹553.66 million, increase in trade payables of ₹501.82 million, increase in trade receivables of ₹180.79 million and increase in contract liabilities of ₹182.90 million. As a result, cash generated from operations for the six months period ended September 30, 2025 was ₹541.96 million, before adjusting for ₹62.94 million of income taxes paid (net of refunds).

Net cash flows used in operating activities was ₹117.27 million for the six months period ended September 30,

2024. We had loss before tax of ₹659.95 million for the six months period ended September 30, 2024, which was primarily adjusted for depreciation and amortisation expense of ₹529.20 million, impairment loss on goodwill of ₹482.65 million, finance cost of ₹269.11 million and provision for slow moving inventory of ₹167.28 million.

This was further adjusted for working capital changes, including increase in inventories of ₹803.03 million, increase in trade payables of ₹327.09 million, increase in trade receivables of ₹232.79 million and increase in contract liabilities of ₹182.67 million. As a result, cash used in operations for the six months period ended September 30, 2024 was ₹9.52 million, before adjusting for ₹107.75 million of income taxes paid (net of refunds).

Net cash flows generated from operating activities was ₹261.41 million for the Financial Year 2025. We had loss before tax of ₹940.06 million for the Financial Year 2025, which was primarily adjusted for depreciation and amortisation expense of ₹1,034.06 million, finance costs of ₹574.43 million. This was further adjusted for working capital changes, including an increase in inventories of ₹734.26 million, an increase in other assets (current and non-current) of ₹267.40 million, an increase in trade receivables of ₹319.48 million, an increase in trade payables of ₹381.02 million, an increase in contract liabilities of ₹264.04 million, and a decrease in other liabilities (current and non-current) of ₹58.48 million. As a result, cash generated from operations for the Financial Year 2025 was ₹382.51 million, before adjusting for ₹121.10 million of income taxes paid (net of refunds).

Net cash used in operating activities was ₹191.08 million for the Financial Year 2024. We had loss before tax of ₹42.78 million for the Financial Year 2024, which was primarily adjusted for depreciation and amortisation expense of ₹1,076.85 million, finance costs of ₹638.06 million. This was further adjusted for working capital changes, including an increase in inventories of ₹556.05 million, an increase in other assets (current and non- current) of ₹211.09 million, an increase in trade receivables of ₹309.23 million, and a decrease in other liabilities (current and non-current) of ₹130.44 million. As a result, cash used in operations for the Financial Year 2024 was ₹150.41 million, before adjusting for ₹40.67 million of income taxes paid (net of refunds).

569Net cash generated from operating activities was ₹98.11 million for the Financial Year 2023. We had loss before tax of ₹1,034.46 million for the Financial Year 2023, which was primarily adjusted for depreciation and amortisation expense of ₹995.16 million, finance costs of ₹479.26 million. This was further adjusted for working capital changes, including an increase in inventories of ₹870.02 million, an increase in trade payables of ₹491.29 million, an increase in contract liabilities of ₹123.04 million and a decrease in other liabilities (current and non- current) of ₹79.49 million. As a result, cash generated from operations for the Financial Year 2023 was ₹107.44 million, before adjusting for ₹9.33 million of income taxes paid (net of refunds).

Investing Activities Net cash used in investing activities was ₹2,036.73 million for the six months period ended September 30, 2025, primarily comprising acquisition of property, plant and equipment of ₹1,999.37 million and investment in bank deposits of ₹117.65 million. These were partially offset by interest received of ₹40.56 million and proceeds from maturity of bank deposits of ₹17.54 million.

Net cash used in investing activities was ₹297.86 million for the six months period ended September 30, 2024, primarily comprising acquisition of property, plant and equipment of ₹1,221.84 million, investment in mutual funds of ₹150.84 million and investment in bank deposits of ₹80.01 million. These were partially offset by proceeds from maturity of bank deposits of ₹1,052.27 million and proceeds from sale of mutual funds of ₹93.77 million.

Net cash used in investing activities was ₹738.20 million for the Financial Year 2025, primarily comprising acquisition of property, plant and equipment of ₹2,651.62 million, investment in bank deposits of ₹3,204.99 million and investment in mutual funds of ₹172.17 million. These were partially offset by proceeds from maturity of bank deposits of ₹4,701.97 million, proceeds from sale of mutual funds of ₹493.04 million, and interest received of ₹72.44 million.

Net cash used in investing activities was ₹3,433.68 million for the Financial Year 2024, comprising acquisition of property, plant and equipment / payment for property, plant and equipment of ₹1,818.07 million, investment in bank deposits of ₹1,662.99 million and investment in mutual funds of ₹293.57 million. These were partially offset by proceeds from sale of property, plant and equipment/ investment property of ₹262.20 million and interest received of ₹78.75 million.

Net cash used in investing activities was ₹888.50 million for the Financial Year 2023, primarily comprising acquisition of property, plant and equipment / payment for property, plant and equipment of ₹856.10 million and investments in associate and joint ventures of ₹71.51 million. These were partially offset by repayment of loans given to related parties of ₹60.30 million and interest received of ₹12.73 million.

Financing Activities Net cash generated from financing activities was ₹1,659.95 million for the six months period ended September 30, 2025, primarily due to proceeds from issue of equity shares of ₹1,281.79 million, proceeds from long term borrowing of ₹1,142.37 million and proceeds from short term borrowing (net) of ₹103.13 million, which were partially offset by exercise of share options of ₹40.97 million, principal payment of lease liabilities of ₹333.03 million and repayment of long term borrowing of ₹239.83 million.

Net cash generated from financing activities was ₹316.07 million for the six months period ended September 30, 2024, primarily due to proceed from long term borrowing of ₹588.54 million and proceeds from short term borrowing (net) of ₹468.54 million, which were partially offset by finance costs paid of ₹319.41 million, repayment of long term borrowing of ₹149.63 million and principal payment of lease liabilities of ₹271.96 million.

Net cash generated from financing activities was ₹254.01 million for the Financial Year 2025, primarily due to proceeds from long term borrowing of ₹1,107.91 million and proceeds from short term borrowings (net) of ₹641.82 million, which were partially offset by finance costs paid of ₹612.13 million and principal payment of lease liabilities of ₹561.63 million, and repayment of long term borrowing of ₹345.06 million.

Net cash generated from financing activities was ₹3,934.90 million for the Financial Year 2024, primarily due to proceeds from issue of compulsorily convertible preference shares of ₹5,219.34 million and proceeds from long term borrowing of ₹903.53 million, which were partially offset by repayment of long term borrowing of ₹797.49 million, finance costs paid of ₹628.19 million and principal payment of lease liabilities of ₹468.41 million.

Net cash from financing activities was ₹543.74 million for the Financial Year 2023, due to proceeds from issue 570of compulsorily convertible debentures of ₹839.43 million, proceeds from issue of compulsorily convertible preference shares of ₹641.00 million, and proceeds from long term borrowing of ₹257.61 million, which were partially offset by finance cost paid of ₹449.30 million, principal payment of lease liabilities of ₹362.22 million and repayment of long term borrowing of ₹282.90 million.

Capitalisation of Expenditure Our expenditure capitalized were incurred in connection with the construction of new manufacturing facilities for new product lines. For the six months period ended September 30, 2025 and 2024, and the Financial Years 2025, 2024 and 2023, our capitalization of expenditure amounted to ₹662.71 million, ₹451.38 million, ₹1,058.79 million, ₹331.28 million and ₹37.64 million respectively.

Financial Indebtedness As of October 31, 2025, we had outstanding borrowings (secured borrowings of ₹5,629.29 million and unsecured borrowings of ₹679.31 million) amounting to ₹6,308.60 million, which primarily consisted of term loans from banks, current maturities of long-term borrowings, interest accrued but not due on borrowings, working capital facilities from banks, and loans from related parties. For further details related to our indebtedness, see “Financial Indebtedness” on page 577.

Contingent Liabilities

The following contingent liabilities in our Restated Consolidated Financial Information are as follows:

Particulars As at September 30, As at March 31, 2025 2024 2025 2024 2023 (₹ in million) Labour related matters (i) 73.10 64.37 68.33 60.00 52.00 Tax matters (ii) 861.22 861.22 861.22 844.31 844.31

Notes:

(i) A few cases have been filed against the Company in District Labour court, Belagavi. If the Labour Court passes an award against the Company, the probable compensation would amount to ₹73.10 million (September 30, 2024: ₹64.37 million; March 31, 2025: ₹68.33 million; March 31, 2024: ₹60.00 million, March 31, 2023: ₹52.00 million). The Company is however confident of winning this case based on the counsel advice and hence the same is not provided in the standalone financial statements.

(ii) The Parent Company has received demand order u/s 156 of the Income Tax Act, 1961 amounting to ₹25.23 for the Financial Year 2016- 17 (Assessment Year 2017-18) and has appealed the said order before Commissioner Appeals and the Company believes it has strong merits in our case.

Capital Commitments

Estimated amount of contracts remaining to be executed on capital account net of advances and not provided for:

Particulars As of September 30, As of March 31, 2025 2024 2025 2024 2023 (₹ in million) Property, Plant and Equipment 1,178.84 54.56 311.26 153.53 207.00 We have entered into various contracts for acquisition of property, plant and equipment / payment for property, plant and equipment as part of our segment expansion plans.

Off-balance Sheet Arrangements We do not have any off-balance sheet arrangements, derivative instruments, swap transactions or relationships with other entities or other unconsolidated entities or financial partnerships that would have been established for the purpose of facilitating off-balance sheet arrangements.

Quantitative and Qualitative Disclosures Regarding Market and Other Risks We are exposed to several market risks during the normal course of business, such as foreign currency, interest rate, credit and liquidity risks. We assess the unpredictability of the financial environment and seek to mitigate potential adverse effects on our financial performance.

571Credit Risk Credit risk is a risk where the counterparty will not meet our obligations under a financial instrument leading to a financial loss. Credit risk arises from cash and cash equivalents and deposits with banks, as well as credit exposures to customers including outstanding receivables, other receivables and loans and deposits.

Credit risk management Credit risk refers to a risk that a counterparty will default on our contractual obligations resulting in financial loss to us. We usually deals with creditworthy counterparties as a means of mitigating the risk of financial loss from defaults. The exposure is continuously monitored.

Provision for expected credit losses Our financial assets mainly comprise of investments, trade receivables, deposits with bank, loans and lease deposits. The assessment of ECL is done as follows: • Loans and Deposits: Loans and Deposits are classified under the A category having negligible or nil risk based on past history of defaults and reasonable forward looking information. Loans and deposits comprises mainly refundable security deposits made on buildings (leased premises). Since these are assets with nil risk, the expected probability of default is “Nil%” and hence no provision for expected credit losses are made in the financial statements.

• Deposits with bank: They are considered to be having negligible risk or nil risk, as they are maintained with banks having strong credit ratings and the period of such deposits is generally not exceeding one year.

• Trade receivables and other dues from related parties: No significant expected credit loss provision has been created for trade receivables. Further, receivables are expected to be collected considering the past trend of very limited defaults and that the balances are not significantly aged. Full provision is made for balances that management believes are credit impaired.

When determining whether the credit risk of a financial asset has increased significantly since initial recognition and when estimating ECLs, we consider reasonable and supportable information that is relevant and available without undue cost or effort. This includes both quantitative and qualitative information and analysis, based on our historical experience and informed credit assessment, that includes forward-looking information.

Trade receivables Ind AS requires expected credit losses to be measured through a loss allowance. We assess, at each date of our financial statement, whether a financial asset or a group of financial assets is impaired. We recognize lifetime expected losses for all contract assets and/or all trade receivables that do not constitute a financing transaction.

For all other financial assets, expected credit losses are measured at an amount equal to the 12 months expected credit losses or at an amount equal to the life time expected credit losses if the credit risk on the financial asset has increased significantly since initial recognition. We perform credit assessment for customers on an annual basis and recognize credit risk as estimated by management. See “Note 28” to our Restated Consolidated Financial Information on page 461 for details.

Liquidity Risk Liquidity risk is a risk where an entity will encounter difficulty in meeting obligations associated with financial liabilities that are settled by delivering cash or another financial asset. Prudent liquidity risk management implies maintaining sufficient cash and the availability of funding through an adequate amount of committed credit facilities to meet obligations when due. Due to the dynamic nature of the underlying businesses, our treasury maintains flexibility in funding by maintaining availability of required funds. Management monitors rolling forecasts of our liquidity position and cash and cash equivalents on the basis of expected cash flows. Also see “– Financial Indebtedness” on page 577.

572Financing arrangements We have access to the following undrawn borrowing facilities at the end of the reporting periods/years:

Particulars As at September 30, As at March 31, 2025 2024 2025 2024 2023 (₹ in million) A. Expiring within one year 1,087.93 2,381.73 1,724.51 752.55 707.21 B. Expiring beyond one year (bank loans) - - - 2,362.56 307.74 Total 1,087.93 2,381.73 1,724.51 3,115.11 1,014.95 Market risk Market risk is a risk where the fair value or future cash flows of a financial instrument will fluctuate because of changes in market prices.

Foreign currency risk We are exposed to foreign exchange risk arising from foreign currency transactions. Foreign exchange risk arises from future commercial transactions and recognized assets and liabilities denominated in a currency that is not our functional currency (“INR” or “₹”). The risk is measured through sensitivity analysis of probable movement in exchange rate as at the reporting period.

Our exports are in foreign currency on the income side and our import of raw materials are primarily denominated in foreign currency which expose us to foreign currency risk. We have a natural hedge in terms of our receivables and payables primarily being in USD. We also have risks in terms of translation of our foreign operations. Further, any additional exposure is continuously monitored and hedging options like forward contracts are taken whenever they are expected to be cost effective.

Interest Rate Risks The exposure of our borrowings to interest rate changes at the end of the reporting periods/years:

Particulars As at September 30, As at March 31, 2025 2024 2025 2024 2023 (₹ in million) Variable rate borrowings 4,933.84 3,467.72 3,985.92 2,428.18 1,729.00 Fixed rate borrowings 3,754.64 4,344.23 3,864.55 4,334.58 5,630.00 Total borrowings 8,688.48 7,811.95 7,850.47 6,762.76 7,359.00 Price risk Price risk is the risk of a decline in the value of a security or an investment portfolio. We have invested in debt mutual funds. The fair value for which is impacted by interest rate movements.

Related Party Transactions We have in the past entered into, and in the future may enter into, transactions with several related parties in the ordinary course of our business. We enter into related party transactions for, among other things, sale of goods, purchase of goods and consumables, lease liabilities, loans and managerial remuneration. For further details of our related party transactions, see “Note 35” to our Restated Consolidated Financial Information on page 471.

573Dependence on a Few Suppliers and Customers We depend on a limited number of suppliers and customers for our revenues and operations. The following table sets for the contribution from our ten largest suppliers (by amounts incurred) and ten largest customers (by revenue) for the periods/years indicated:

Particulars For the six months period For the Financial Year ended September 30 2025 2024 2025 2024 2023 Total value of goods purchased from ten 40.48 43.11 40.17 47.14 44.25 largest suppliers by amounts incurred, as a percentage of total expenses (%) Total revenue from ten largest customers, as a 82.51 85.56 88.57 86.51 86.48 percentage of revenue from operations (%) For details, “Risk Factors – Our business is subject to fluctuations in the prices and disruptions in the availability of raw materials, which may have an adverse effect on our business, results of operations, financial condition and cash flows” and “Risk Factors – We are dependent on our ten largest customer groups, which comprise a significant portion of our revenue from operations (82.51% for the six months period ended September 30, 2025, 85.56% for the six months period ended September 30, 2024, 88.57% for the Financial Year 2025, 86.51% for the Financial Year 2024 and 86.48% for the Financial Year 2023). Any failure to maintain our relationship with these customer groups or any adverse changes affecting their financial condition will have an adverse effect on our business, results of operations, financial condition and cash flows.” and on pages 41 and 38, respectively.

Significant Economic Changes Other than as described above under “— Significant Factors Affecting our Results of Operations” on page 542, to the knowledge of our management, there are no other significant economic changes that materially affect or are likely to affect our income from continuing operations.

Unusual or Infrequent Events or Transactions Except as disclosed in this Prospectus, to our knowledge, there have been no “unusual” or “infrequent” events or transactions that have in the past, or may in the future, affect our business operations or future financial performance.

Known Trends or Uncertainties Our business has been affected and we expect will continue to be affected by the trends identified above in “— Significant Factors Affecting our Results of Operations” on page 542 and the uncertainties described in “Risk Factors” on page 37. To our knowledge, except as described or anticipated in this Prospectus, there are no known factors which we expect will have an adverse impact on our revenues or income from continuing operations.

Future Relationship Between Cost and Income Other than as described in this Prospectus, to the knowledge of our management, there are no known factors that might affect the future relationship between costs and revenues.

New Products or Business Segments Other than as described in “Our Business — Our Strategies” on page 302, there are no new products or business segments in which we operate or propose to operate.

Seasonality of Business Our business is subject to seasonality as demand for our products is influenced by the cyclicality and seasonality of consumer products in each country. Also see “Risk Factors – Our consumer business is subject to seasonality, which may contribute to fluctuations in our results of operations and financial condition” on page 78.

574Significant developments occurring after September 30, 2025 Except as disclosed below and in this Prospectus, to our knowledge, no circumstances have arisen since September 30, 2025, the date of the last financial statements included in this Prospectus, which materially and adversely affect or is likely to affect our operations or profitability, or the value of our assets or our ability to pay our liabilities within the next 12 months.

- On November 10, 2025, our Company had undertaken a private placement of Equity Shares, as permitted under applicable law, aggregating to ₹1,440.00 million (“Pre-IPO Placement”). The Pre-IPO Placement was made to SBI Emergent India Fund, DSP India Fund – India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹123.97 per Equity Share.

For further details, see “Restated Consolidated Financial Information – Note 51 – Subsequent events” on page

518.

575CAPITALISATION STATEMENT The following table sets forth our Company’s capitalization as at September 30, 2025, on the basis of amounts derived from our Restated Consolidated Financial Information, and as adjusted for the Offer. This table should be read in conjunction with the sections titled “Risk Factors”, “Restated Consolidated Financial Information” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations”, on pages 37, 383 and 539, respectively.

(in ₹ million, except ratios) Pre-Offer as at As adjusted for the Particulars September 30, 2025 Off er Borrowings Non-current borrowings# (II) 2,073.92 2,073.92 Current borrowings# (I) 3,261.19 3,261.19 Total borrowings (III = I + II) 5,335.11 5,335.11 Equity Equity share capital# (IV) 6,050.02 6,706.66 Instruments entirely equity in nature# (V) - - Other equity# (VI) 2,004.27 9,487.63 Non-controlling interests# (VII) (9.41) (9.41) Total equity (VIII = IV + V + VI + VII) 8,044.88 16,184.88 Total capitalization (IX = III + VIII) 13,379.99 21,519.99

Ratio: Non-current borrowings / Total equity (II /VIII) 0.26 0.13

Ratio: Total borrowings / Total equity (III / VIII) 0.66 0.33 #These terms shall carry the meaning as per Schedule III of the Companies Act 2013.

Note: The above has been computed on the basis of amounts derived from the Restated Consolidated Financial Information. “As adjusted for the Offer” column reflects changes in Equity Share capital and Other equity only on account of:

(a) the proceeds from the Fresh Issue of ₹6700.00 million, out of which ₹ 540.48 million has been adjusted (increase) towards the Equity Share capital and ₹6,159.52 million has been adjusted (increase) towards Other equity.

(b) the proceeds from the private placement (Pre-IPO Placement) of ₹1,440.00 million, out of which ₹ 116.16 million has been adjusted (increase) towards the Equity Share capital and ₹1,323.84 million has been adjusted (increase) towards Other equity.

For details of change in the share capital since September 30, 2025, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Significant Developments occurring after September 30, 2025” and “Capital Structure – Notes to the Capital Structure – Share capital history of our Company – History of Equity Share capital of our Company” on pages 575 and 116, respectively.

576FINANCIAL INDEBTEDNESS Our Company and our Subsidiaries avail credit facilities in the ordinary course of business, including for meeting working capital requirements and other business requirements. For details regarding the borrowing powers of our Board, in accordance with Section 179 and Section 180 of the Companies Act 2013, and our Articles of Association, see “Our Management – Borrowing Powers” on page 365.

The details of our aggregate indebtedness of our Company and Subsidiaries as on October 31, 2025, is provided

below: (in ₹ million) Sanctioned amount as at Amount outstanding as at Nature of borrowing October 31, 2025 October 31, 2025 A. Secured borrowings

(a) Fund based - Cash credit 1,630.00 338.04 - Pre-shipment finance 380.00 - - Post-shipment finance 1,330.00 924.38 - Working capital demand loan 530.00 - - Working capital term loan 484.85 58.73 - Term loan 4178.44* 3,336.40 - Export credit 950.00 - - Running packing credit/ pre-shipment credit in 1,150.00 929.72 foreign currency

(b) Non-fund based - Letter of credit 832.00 34.32 - Bank guarantee 190.00 7.70 - Loan equivalent risk 60.00 - - Foreign bills discounted/ purchased 1,150.00 - - Credit line of future contracts 9.74 - Total secured borrowings (A) 7,303.03** 5,629.29 B. Unsecured borrowings Inter-corporate loans# 350.17 329.31 Non-convertible debentures 350.00 350.00 Total unsecured borrowings (B) 700.17 679.31 Total (A+B) 8,003.20 6,308.60

Note: As certified by Manian & Rao, Chartered Accountants (FRN: 001983S), by way of their certificate dated November 26, 2025. * Includes sanction limits provided by the foreign institutions (USA & France) in the respective currency being restated to INR using the closing rate as on October 31, 2025.

** Net of sub limits to the tune of Rs. 5,572.00 million under various facilities used interchangeably. # Includes credit facilities availed by the Subsidiaries from Corporate Promoter.

The details in relation to the unsecured borrowings of the Company (in the nature of inter-corporate loans) for the six months period ended September 30, 2025 and September 30, 2024 and Fiscals 2025, 2024 and 2023 are as

follows:

577(i) Aequs Aerospace BV (₹ in million, unless stated otherwise) Fiscal/Peri Name of Date of Purpose Sanction Opening Total Amount Closing od lender sanctio ed balance addition repaid balance n amount as of the during during (including beginnin the the interest) as g of the year/peri year/peri of the end year/peri od od of the od year/perio d(1) Six Aequs March Business 248.11 256.37 14.79 - 303.60 months Manufacturi 7, 2024 requireme period ng nt ended Investment Septemb Private er 30, Limited 2025 Six Aequs March Business 248.11 248.14 10.76 12.28 255.96 months Manufacturi 7, 2024 requireme period ng nt ended Investment Septemb Private er 30, Limited 2024 Fiscal 2025 Aequs March Business 248.11(2) 248.14 34.50 15.14 275.73 Fiscal 2024 Manufacturi 7, 2024 requiremen 248.11(2) - 249.67 - 248.14 ng ts Investment Private Limited Aequs Inc. June 148.44(3) 171.75 4.09 175.84 - Fiscal 2023 Aequs Inc. 12, 140.22 18.73 - 171.75 2018 222.96 18.83 107.25 140.22

(1) Closing balances have been adjusted for forex fluctuations.

(2) The conversion rate as on March 7, 2024 (USD/INR- 82.70) is considered. Source: fbil.org.

(3) The conversion rate as on June 12, 2018 (USD/INR- 67.47) is considered. Source: xe.com.

578(ii) Aequs Aerospace LLC (₹ in million, unless stated otherwise) Closing Opening Total Amount balance balance as addition repaid (including Sanctione of the Name of Date of during during interest) as Fiscal Purpose d beginning lender sanction the the of the end amount* of the year/perio year/perio of the year/perio d d year/period( d

1) Six months period Septemb Business Melligeri ended er 4, requiremen 43.21 25.2 1.1 2.2 25.10 Investme Septemb 2019 ts nt LLC er 30, 2025 Six months period Septemb Business Melligeri ended er 4, requiremen 43.21 22.6 1.0 - 23.7 Investme Septemb 2019 ts nt LLC er 30, 2024 Fiscal

43.21(2) 22.56 2.69 - 25.25 2025 Septemb Business Fiscal Melligeri 15.93 er 4, requiremen 15.70 2.06 - 2024 Investme 2019 ts 43.21(2) Fiscal nt LLC

14.93 1.99 - 15.70 2023

(1) Closing balances have been adjusted for forex fluctuations.

(2) The conversion rate as on September 4, 2019 (USD/INR-72.01) is considered. Source: fbil.org.

Key terms of borrowings availed by our Company and our Subsidiaries:

1. Tenor and interest rate: The tenor of the term loans is typically up to 5 years and the tenor of working capital term loans ranges from 90 days to 12 months. The interest rates for the facilities are typically linked to benchmark rates varying from 5.60% p.a. to 12.40% p.a., such as the repo rate prescribed by the RBI, treasury bill rate and marginal cost of funds-based lending rate (“MCLR”) of the specific lender plus spread per annum is charged above these benchmark rates. The interest rates for the facilities availed by certain of our foreign Subsidiaries typically vary from 0.73% p.a. to 13.00 % p.a. The interest rate for the Non-Convertible Debentures is 13.00% p.a., payable on a half-yearly basis.

2. Repayment: The term of repayment for our facilities varies basis the terms provided in the agreements entered into in relation to the facilities.

3. Prepayment: Certain loans availed by our Company have prepayment provisions which allow for prepayment of the outstanding loan amount and may carry a prepayment penalty on the outstanding amount subject to terms and conditions stipulated under the loan documents. The prepayment penalty as per the terms of loan agreements ranges from 2% to 5%.

4. Penal interest: Our Company is required to pay additional interest to the lenders for non-compliance of sanction terms including defaults, overdue, or delays in the payment of interest or other monies due and payable, and non-creation of security within stipulated timelines in the borrowing arrangements. This additional interest is charged as per the terms of the loan agreements and is typically 1.00% to 8.00% over the applicable interest rate.

(a) Security: Our secured borrowings are typically secured by:

(i) first pari passu charge by way of hypothecation on moveable fixed assets including machinery, equipment, entire stocks of raw materials, finished as well as consumables and other spares, domestic and export receivables of our Company and such other moveables, present and future;

579(ii) first pari passu charge over stocks and book debts of the Company; and

(iii) second ranking charge over existing primary and collateral securities including mortgage created in favour of the lender.

5. Restrictive covenants: As per the terms of the borrowing arrangements, certain corporate actions for

which our Company requires prior written consent of the lenders include: a) substantial change in the management or control of our Company whereby the effective beneficial ownership, management or control of our Company shall change;

b) making amendments to the Memorandum of Association and Articles of Association; c) enter into any scheme of merger, amalgamation, or do a buyback; and d) create charge, lien or any other encumbrance over our security in the borrowing arrangements.

6. Events of Default: Our borrowing arrangements prescribe the following events of default, including the

following: a) non-payment or default in payment of any amounts due under the loan facilities; b) if any circumstance or event occurs which is or is likely to prejudice, impair, imperil, depreciate or jeopardise any security or any part thereof;

c) failure to keep or perform any of the terms or provisions of any other agreement between the Bank and Borrower in respect of the borrowing arrangement; d) deterioration or impairment of security; e) cessation or threat to cease carrying on the business, change in the general nature or scope of business or change in control;

f) breach of any covenants, conditions, undertakings, representations or warranties; and g) sale or disposal of security.

7. Consequences of occurrence of events of default: Our borrowing arrangements prescribe the following consequences of occurrence of events of default, including the following: a) cancellation of the undrawn commitment and suspension of the withdrawals;

b) security interest created in terms of the facility agreements and the transaction documents to be enforceable; and c) performance of covenants, including but not limited to sale or disposal of property.

This is an indicative list and there may be additional terms that may require the consent of the relevant lender, the breach of which may amount to an event of default under various borrowing arrangements entered into by us, and the same may lead to consequences other than those stated above. We have obtained the necessary consents required under the relevant loan documentation for undertaking activities in relation to the Offer. For risks in relation to the financial and other covenants required to be complied with in relation to our borrowings, see “Risk Factors – Our inability to meet our obligations, including financial and restrictive covenants, under our financing arrangements could adversely affect our business, results of operations, financial condition and cash flows” on page 72.

580SECTION VI – LEGAL AND OTHER INFORMATION OUTSTANDING LITIGATION AND OTHER MATERIAL DEVELOPMENTS Except as disclosed in this section, there are no outstanding (i) criminal proceedings (including first information reports whether or not cognizance has been taken by any court or judicial authority) involving our Company, Subsidiaries, Directors or Promoters (collectively, “Relevant Parties”); (ii) actions taken by statutory or regulatory authorities (including show cause notices issued by such authorities) against the Relevant Parties; (iii) claims related to direct or indirect taxes involving the Relevant Parties (disclosed in a consolidated manner giving the total number of claims and the total amounts involved);(iv) disciplinary actions including penalties imposed by SEBI or the Stock Exchanges against the Promoters in the last five financial years, including outstanding action; and (v) other outstanding litigation/arbitration proceedings involving the Relevant Parties as determined to be material pursuant to the Materiality Policy. Further, except as disclosed in this section, there are no criminal proceedings (including first information reports for which no cognizance has been taken by any court or any judicial authority) and actions by regulatory and statutory authorities involving our Key Managerial Personnel and Senior Management. In addition, there is no pending litigation involving our Group Companies, the adverse outcome of which may have a material impact on our Company.

Pursuant to the Materiality Policy, for the purposes of (v) above, any outstanding litigation involving the Relevant Parties (including tax matters mentioned in point (iv) above), has been considered ‘material’ and accordingly disclosed in this Prospectus where the monetary amount of claim/ amount in dispute, to the extent quantifiable exceeds, (a) two percent of turnover, for the most recent financial year as per the restated consolidated financial statements; or (b) two percent of net worth, as at the end of the most recent financial period as per the Restated Consolidated Financial Information; or (c) five percent of the average of absolute value of profit or loss after tax, for the last three financial years as per the Restated Consolidated Financial Information, whichever is lower (“Materiality Threshold”).

Accordingly, 5% of the average of absolute value of profit or loss after tax, as per the Restated Consolidated Financial Information for the last three Fiscals, i.e., ₹ 37.68 million, has been considered as the Materiality Threshold.

Further, litigation where the decision in one case is likely to affect the decision in similar cases, even though the amount involved in an individual litigation may not exceed the Materiality Threshold shall also be considered material litigation in relation to the Relevant Parties. In addition, any outstanding civil litigation/ arbitration proceedings involving the Relevant Parties wherein the monetary liability is not quantifiable, or does not exceed the Materiality Threshold, shall be considered ‘material’ and shall be disclosed in this Prospectus, if the outcome of such litigation could have a material adverse effect on the business, operations, performance, prospects, financial position or reputation of our Company.

For the above purposes, pre-litigation notices received by the Relevant Parties from third parties (excluding notices from statutory, regulatory or tax authorities or regulatory/ statutory notices in relation to any criminal action) shall not be evaluated for materiality until such persons are impleaded as defendants or respondents in proceedings before any judicial/arbitral forum or is notified by any governmental, statutory, or regulatory authority of any such proceeding that may be commenced.

Except as stated in this section, there are no outstanding material dues to creditors of our Company. Further in terms of the Materiality Policy, a creditor shall be considered “material”, if the outstanding dues to such creditor is equal to or exceeds 5% of total outstanding dues (trade payables) of our Company, as on the date of the most recent financial period in the Restated Consolidated Financial Information as disclosed in this Prospectus (“Material Creditors”). Accordingly, as on September 30, 2025, any outstanding dues exceeding ₹ 146.58 million have been considered as material outstanding dues for the purposes of identification of material creditors and related information in this section. For outstanding dues to any party which is a micro, small or medium enterprise (“MSME”), the disclosure will be based on information available with the Company regarding the status of the creditor as defined under Micro, Small and Medium Enterprises Development Act, 2006, as amended read with the rules and notifications thereunder.

I. Litigation involving our Company A. Litigation against our Company a) Criminal proceedings 581Nil b) Actions taken by regulatory and statutory authorities Nil c) Material civil proceedings Nil B. Litigation by our Company a) Criminal proceedings Nil b) Material civil proceedings Nil C. Tax proceedings involving our Company Particulars Number of cases Aggregate amount involved* (in ₹ million) Direct tax 3 805.34 Indirect tax Nil Nil Total 3 805.34 * To the extent quantifiable.

Material tax litigation involving the Company The Income Tax Department (“ITD”) issued a notice dated September 23, 2019, under Section 143(2) of the Income Tax Act to our Company. Subsequently, three additional notices dated May 8, 2020, January 4, 2021, and April 12, 2021, were issued by the ITD under Section 142(1) of the Income Tax Act to our Company and each notice was responded to by our Company. The National Faceless Assessment Centre (“NFAC”) issued a show cause notice dated April 28, 2021, to our Company, proposing additions towards payment as per section 68 of the Income Tax Act. Our Company responded to the show cause notice on May 7, 2021, stating that the provisions of the first proviso to Section 68 of the Income Tax Act are not applicable when funds are received from non-residents and furnished corresponding copies of the bank statements. Thereafter, the NFAC issued a show cause notice dated August 10, 2021 (“SCN”) under Section 142(1) of the Income Tax Act stating that approximately ₹

712.13 million received from Jagadish Shivaputrappa Melligeri will be considered as undisclosed income in the absence of documents and a response from him. In furtherance of receipt of the SCN, our Company and Jagadish Shivaputrappa Melligeri submitted letters dated August 17, 2021, August 26, 2021, and September 8, 2021 and May 7, 2021 and August 21, 2021 reiterating the reasons for the inapplicability of Section 68 of the Income Tax Act. Subsequently, our Company received an order dated September 27, 2021 from the NFAC under Section 143(3) of the Income Tax Act relating to Financial Year 2017- 18 (assessment year 2018-19) raising a demand of ₹ 779.56 (“Order”). Aggrieved by such Order, our Company filed a writ petition dated October 21, 2021 before the High Court of Karnataka seeking the

Order to be stayed, and also filed an appeal dated October 26, 2021 before the Commissioner of Income- tax (Appeals). The matter is currently pending.

II. Litigation involving our Subsidiary A. Litigation against our Subsidiary a) Criminal proceedings Nil b) Actions taken by regulatory and statutory authorities Nil 582c) Material civil proceedings Nil B. Litigation by our Subsidiary

(a) Criminal proceedings Our Subsidiary, Aequs Consumer Products Private Limited served a notice of demand dated May 3, 2024 to Grind Automation LLP, pursuant to which it filed a complaint under Section 200 of the Code of Criminal Procedure, 1973 read with Section 138 of the Negotiable Instruments Act, 1881, before the VIII Judicial Magistrate of First Class Court, Belagavi against Grind Automation LLP, in relation to dishonour of a cheque amounting to ₹ 0.44 million issued in favour of Aequs Consumer Products Private Limited (“Cheque”). The Cheque was issued as a refund for the money paid by our Company as advance payment towards purchase of two machines from Grind Automation LLP, which were not as per the agreed specifications. The matter is currently pending.

(b) Material civil proceedings Nil C. Tax proceedings involving our Subsidiary Particulars Number of cases Aggregate amount involved* (in ₹ million) Direct tax 3 24.60 Indirect tax 4 19.52 Total 7 44.12 * To the extent quantifiable.

III. Litigation involving our Directors A. Litigation against our Directors a) Criminal proceedings Nil b) Actions taken by regulatory and statutory authorities Nil c) Material civil proceedings Nil B. Litigation by our Directors a) Criminal proceedings Nil b) Material civil proceedings Nil C. Tax proceedings involving our Directors Particulars Number of cases Aggregate amount involved (in ₹ million) Direct tax 1 3.31 Indirect tax Nil Nil Total 1 3.31 583IV. Litigation involving our Promoters A. Litigation against our Promoters a) Criminal proceedings Nil b) Actions taken by regulatory and statutory authorities Nil c) Material civil proceedings Nil d) Disciplinary actions including penalties imposed by SEBI or stock exchanges in the last five financial years preceding the date of this Prospectus including outstanding actions Nil B. Litigation by our Promoters a) Criminal proceedings Nil b) Material civil proceedings Nil C. Tax proceedings involving our Promoters Particulars Number of cases Aggregate amount involved (in ₹ million) Direct tax Nil Nil Indirect tax Nil Nil Total Nil Nil V. Litigation involving our Key Managerial Personnel and Senior Management A. Litigation against our Key Managerial Personnel and Senior Management a) Criminal proceedings Nil b) Actions taken by regulatory and statutory authorities Nil B. Litigation by our Key Managerial Personnel and Senior Management a) Criminal proceedings Nil VI. Outstanding dues to creditors In accordance with the Materiality Policy, a creditor to whom ₹146.58 million, which is 5% of the total trade payables of our Company as at the end of the latest period of the Restated Consolidated Financial Information, is due by our Company, have been considered as ‘material’ creditors.

584Based on the above, the details of outstanding dues (trade payables) owed to micro and small enterprises, material creditors and other creditors, as at September 30, 2025, are set out below:

Type of creditors Number of creditors Amount involved (in ₹ million) Material creditors 1 178.10 Micro, Small and Medium Enterprises 55 81.50 Other creditors 693 2,671.91* Total 749 2,931.51 * Includes provision for expenses to the extent of ₹ 1,168.89 million.

The details pertaining to outstanding over dues to the material creditors along with names and amounts involved for creditor have been made available on the website of our Company at www.aequs.com/investor/.

VII. Material developments Except as stated in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” on page 539, there have been no material developments, since the date of the last financial statements disclosed in this Prospectus, which materially and adversely affect or are likely to affect our profitability taken as a whole or the value of our consolidated assets or our ability to pay our liabilities within the next 12 months.

585GOVERNMENT AND OTHER APPROVALS Our business requires various approvals, consents, licenses, registrations and permits issued by relevant governmental and regulatory authorities of the respective jurisdiction under applicable rules and regulations. Set out below is an indicative list of such consents, licenses, registrations, permissions, and approvals obtained by

(a) our Company; and (b) our material Subsidiaries, being, (i) AeroStructures Manufacturing India Private Limited; (ii) Aequs Consumer Products Private Limited; (iii) Aequs Engineered Plastics Private Limited; (iv) Aequs Toys Private Limited; (v) Aequs Force Consumer Products Private Limited; (“Indian Material Subsidiaries”), along with (i) Aequs Aerospace France SAS; (ii) Aequs Oil & Gas LLC; (iii) Aequs Aero Machine Inc.; and (iv) Aequs Aerospace B.V. (“Foreign Material Subsidiaries”, and together with Indian Material Subsidiaries, “Material Subsidiaries”), which are considered material and necessary for the purposes of undertaking their respective businesses and operations (“Material Approvals”). In addition, certain Material Approvals may have lapsed or expired or may lapse in their ordinary course of business, from time to time, and our Company and our Material Subsidiaries have either already made applications to the appropriate authorities for renewal of such Material Approvals or are in the process of making such renewal applications in accordance with applicable law and requirements and procedure. Unless otherwise stated, these approvals are valid as of the date of this Prospectus.

For details in connection with the regulatory and legal framework within which we operate, see the section titled “Key Regulations and Policies” on page 327. For details of risks associated with not obtaining or delay in obtaining the requisite approvals, please see the section titled “Risk Factors – If we fail to obtain, maintain or renew the statutory and regulatory licenses, permits and approvals required for our business and operations, our business, results of operations, financial condition and cash flows may be adversely affected.” on page 51.

I. General Details of our Company and Indian Material Subsidiaries A. Incorporation details For details of the incorporation of our Company and our Indian Material Subsidiaries, see “History and Certain Corporate Matters - Brief history of our Company” and “Our Subsidiaries and Joint Ventures” on pages 335 and 342, respectively.

B. Offer related approvals For details of the corporate and authorizations obtained by our Company in relation to the Offer, see “Other Regulatory and Statutory Disclosures – Authority for the Offer – Corporate Approvals” on page 591.

C. Tax related approvals Our Company and Indian Material Subsidiaries are required to obtain registrations under various national tax laws and state specific tax laws such as the Income Tax Act, 1961, Central Goods and Services Tax Act, 2017, Karnataka Tax on Profession, Trades, Callings and Employment Act, 1976, and any other tax legislation as applicable. Our Company and our Indian Material Subsidiaries have obtained the Material Approvals from the appropriate regulatory and governing authorities in relation to such tax laws.

D. Labour and employment related approvals

(i) Certificates of registration issued under the Employees’ Provident Fund and Miscellaneous Provisions Act, 1952.

(ii) Certificates of registration issued under the Employees’ State Insurance Act, 1948.

(iii) Registrations under the Contract Labour (Regulation and Abolition) Act, 1970.

(iv) Registrations under the Karnataka Labour Welfare Fund Act, 1965.

E. Foreign Trade related approvals

(i) The importer exporter code issued by the Ministry of Commerce and Industry, Government of India.

586(ii) Registration cum membership certificates issued under the Foreign Trade Policy, Government of India.

F. Other Material Approvals

(i) Letters of approval issued under the Special Economic Zones Act, 2005 by the Department of Commerce, Government of India, for our manufacturing units situated in Special Economic Zones;

(ii) Legal entity identifier certificates issued by Legal Entity Identifier Limited.

II. Material Approvals obtained in relation to the business and operations of our Company and Indian Material Subsidiaries As on the date of this Prospectus, the Company has one manufacturing unit situated in Belagavi, and our Indian Material Subsidiaries have nine manufacturing units situated in Hubballi, Belagavi and Koppal, collectively. Our Company and Indian Material Subsidiaries require various Material Approvals under several central or state-level acts, rules and regulations to carry on our business and operations. An indicative list of the Material Approvals required by our Company and our Indian Material Subsidiaries

for the business and operation of our manufacturing units is provided below:

1. Certificates of Stability and Factory licenses: Our Company and our Indian Material Subsidiaries are required to obtain factory licenses and certificates of stability, under the Karnataka Factories Rules, 1969, in respect of our manufacturing units.

2. Environment related approvals: Our Company and our Indian Material Subsidiaries are required to obtain consents to operate and establish under the Air Act and Water Act, and authorisation for managing hazardous and other wastes under the Hazardous and Other Wastes (Management and Transboundary Movement) Rules, 2016 in respect of our manufacturing units.

3. No objection certificates from fire departments: Our Company and our Indian Material Subsidiaries are required to obtain no objection certificate (“NOC”) issued by the Chief Fire Officer, Government of Karnataka, to continue operations of our manufacturing units.

4. One of our Indian Material Subsidiaries, AeroStructures Manufacturing India Private Limited is also required to obtain a license from the Ministry of Defence, Department of Defence Production, in connection with the manufacture of certain products for specific projects undertaken by them.

III. Material Approvals in relation to our Foreign Material Subsidiaries

(i) Aequs Aerospace France SAS a. Receipts of Declaration issued by the Prefect of Maine-et- Loire, under the nomenclature of classified facilities for environmental protection.

(ii) Aequs Aero Machine Inc. a. Registration under Texas Business Organisation Code by Secretary of State, Texas. b. Directorate of Defense Trade Controls (“DDTC”) manufacturer registration statement for manufacturing or exporting or temporarily importing defense articles or furnishing defense services under the Arms Export Control Act and the Internal Traffic in Arms Regulations by Defense Trade Controls Compliance.

(iii) Aequs Oil & Gas LLC a. Registration under the Delaware Limited Liability Company Act by the Secretary of State, Delaware. b. Registration under the Texas Business Organisation Code by the Secretary of State, Texas.

587IV. Material Approvals for which applications are pending In respect of our manufacturing units, our Company and Material Subsidiaries currently hold all such aforementioned Material Approvals as they are required to obtain, except the following, in respect of which they have made applications before relevant authorities to obtain the registrations or renewals or modifications, as

applicable:

S. Description Renewal Authority Date of application No.

Our Company Nil Material Subsidiaries

1. Factory License for Renewal Department of Factories, October 23, 2025 Aequs Toys Private Boilers, Industrial Safety & Limited SEZ Unit I Health, Government of Karnataka

2. Factory License for Renewal Department of Factories, October 23, 2025 Aequs Toys Private Boilers, Industrial Safety & limited DTA Unit II Health, Government of Karnataka

3. Factory License for Renewal Department of Factories, October 10, 2025 Aequs Force Boilers, Industrial Safety & Consumer Products Health, Government of Private Limited Karnataka V. Material Approvals which have expired and renewal to be applied for S. No. Description Authority Date of expiry Our Company Nil Material Subsidiaries Nil VI. Material Approvals required but not obtained or applied for S. No. Description Authority Date of expiry Our Company Nil Material Subsidiaries Nil VII. Intellectual Property For details in relation to our intellectual property, see “Our Business – Intellectual Property” on page 318.

588OUR GROUP COMPANIES For the purpose of disclosure in this Prospectus, the following shall be considered as Group Companies of our Company, in accordance with SEBI ICDR Regulations: (i) such companies (other than our Promoters and Subsidiaries) with which there were related party transactions, during the period for which financial information is disclosed in this Prospectus, as covered under Ind AS 24; and (ii) any other companies as may be considered material by our Board of Directors.

In relation to (ii) above, in accordance with our Materiality Policy, for the purposes of disclosure in this Prospectus, our Company has considered as material, the companies (other than our Corporate Promoters and Subsidiaries), forming part of the Promoter Group with which our Company has had transactions in the most recent financial year or the relevant stub period for which financial information is disclosed in this Prospectus, as applicable, which individually or in the aggregate, exceed 10% of the total restated consolidated revenue from operations of our Company for the most recent financial year or the stub period, as the case may be, as per the Restated Consolidated Financial Information.

Based on the parameters mentioned above, as on the date of this Prospectus, we have identified the following as Group Companies, the details of which are set forth below:

S. Name Registered Office Country of No. incorporation

1. Aeq us Foundation, India* Ground Floor, Aequs Tower, No. 55, Whitefield Main India Road Mahadevapura Post, Bengaluru 560 048, Karnataka, India

2. SQu AD Forging India No.437/A, Aequs SEZ, Hattargi Village, Hukkeri India Private Limited Taluk, Belagavi 591 243, Karnataka, India

3. Aer ospace Processing India No. 437/A, Aequs SEZ, Hattargi Village, Hukkeri India Private Limited Taluk, Belagavi 591 243, Karnataka, India

4. Ind ustrial Knowledge Centre Aequs Tower, No. 55, Whitefield Main Road India Private Limited Mahadevapura Post, Bengaluru 560 048, Karnataka, India

5. Aeq us SEZ Private Limited Aequs Tower, No. 55, Whitefield Main Road India Mahadevapura Post, Bengaluru 560 048, Karnataka, India

6. Me lligeri Investments, LLC 108 West 13th Street, Wilmington, Delaware 19801 United States

7. QuE ST Global Engineering No.437/A, Aequs SEZ, Hattargi Village, Hukkeri India Services Private Limited Taluk, Belagavi – 591 243

8. MF RE Estate Private No. 55, Whitefield Main Road Mahadevapura Post, India Limited Bengaluru 560 048, Karnataka, India

9. Aut omotive End Solution Aequs Tower, No. 55, Whitefield Main Road India Private Limited Mahadevapura Post, Bengaluru 560 048, Karnataka, India

10. MF O IP Holdings Limited Level 1, Blue Harbour Business Centre, Ta’ Xbiex Malta (formerly known as Aequs Yacht Marina, TA’ XBIEX XBX 1027, Malta Limited, Malta)

11. Hub balli Durable Goods Aequs Tower, No. 55, Whitefield Main Road India Cluster Private Limited Mahadevapura Post, Bengaluru 560 048, Karnataka, India

12. MF RE Taris, LLC 701 Brazos Street, Ste. 720, Austin TX, 78701 United Stated

13. Aeq us Inc. PO Box 309, Ugland House, George Town, Grand Cayman Islands Cayman, Cayman Islands

14. Aeq us Cookware Private HDGC, Sy No 11, Hissa No. 12, Ittigatti Village, India Limited Kanavihonnapur, Dharwad 580 114, Karnataka, India * Not for profit organisation.

In accordance with the SEBI ICDR Regulations, information with respect to: (i) reserves (excluding revaluation reserve); (ii) sales; (iii) profit/(loss) after tax; (iv) earnings per share; (v) diluted earnings per share; and (vi) net asset value, of our top five Group Companies determined on the basis of their annual turnover, based on their respective audited financial statements for the preceding three years shall be hosted on the website of our Company, as indicated below:

589S. Name Website QR code No.

1. SQu AD Forging India Private Limited

2. Aeq us SEZ Private Limited

3. Aer ospace Processing India Private Limited www.aequs.com/investor/ QuEST Global Engineering

4.

Services Private Limited

5. Hub balli Durable Goods Cluster Private Limited Our Company has provided links to such websites solely to comply with the requirements specified under the SEBI ICDR Regulations. The information provided on the websites given above should not be relied upon or used as a basis for any investment decision.

Common pursuits There are no common pursuits between our Group Companies and our Company, as on the date of this Prospectus.

We shall adopt necessary procedures and practices as permitted by law to address any instances of conflict of interest, as and when they may arise.

Related business transactions with our Group Companies and their significance on the financial performance of our Company Except for the transactions set forth in “Restated Consolidated Financial Information – Note 35 – Related Party Transactions” on page 471, there are no related business transactions between our Group Companies and our Company.

Nature and interests of our Group Companies As on the date of this Prospectus, our Group Companies do not have any interest in the promotion of our Company.

Except as disclosed in “Restated Consolidated Financial Information – Note 35 – Related Party Transactions” on page 471, our Group Companies do not have any interest in any property acquired by our Company in the three years preceding the date of filing this Prospectus or proposed to be acquired by our Company as on the date of this Prospectus. Additionally, one of our Group Companies, Aequs SEZ Private Limited, has entered into arrangements for leasing parcels of land to our Company and certain of our Subsidiaries namely AeroStructures Manufacturing India Private Limited, Aerostructures Assemblies India Private Limited, Aequs Engineered Plastics Private Limited, Aequs Force Consumer Products Private Limited, Aequs Toys Private Limited, Koppal Toys Molding COE Private Limited, Aequs Rajas Extrusion Private Limited, Aequs Engineered Plastics Private Limited and Aequs Consumer Products Private Limited.

Our Group Companies do not have an interest in any transaction by our Company pertaining to acquisition of land, construction of building, supply of machinery, etc.

Except as disclosed in “Restated Consolidated Financial Information – Note 35 – Related Party Transactions” on page 471, and in the ordinary course of business, our Group Companies do not have or currently propose to have any business interest in our Company.

Litigation As on the date of this Prospectus, there is no pending litigation involving our Group Companies which may have a material impact on our Company.

Other confirmations As on date of this Prospectus, our Group Companies are not listed on any stock exchange in India or abroad.

Further, our Group Companies have not made any public, rights issue or composite issue (as defined under the SEBI ICDR Regulations) of securities in the preceding three years.

590OTHER REGULATORY AND STATUTORY DISCLOSURES Authority for the Offer Corporate Approvals • Our Board has authorised the Offer by way of its resolution dated May 10, 2025, and our Shareholders have authorized the Fresh Issue pursuant to a special resolution passed on May 13, 2025. Further, our Board has taken on record the consent and the authorizations of the Selling Shareholders to participate in the Offer for Sale pursuant to a resolution passed at its meeting held on May 30, 2025, and November 14, 2025.

• Our Board pursuant to its resolution dated May 30, 2025, and the IPO Committee pursuant to its resolution dated May 31, 2025 have approved the Pre-filed Draft Red Herring Prospectus for filing with SEBI and the Stock Exchanges.

• Our Board pursuant to its resolution dated September 30, 2025 has approved the Updated Draft Red Herring Prospectus - I for filing with SEBI and the Stock Exchanges. • Our Board pursuant to its resolution dated November 26, 2025 has approved the Red Herring Prospectus for filing with SEBI and the Stock Exchanges.

• Our Board pursuant to its resolution dated December 5, 2025 has approved this Prospectus for filing with SEBI and the Stock Exchanges.

Approvals from the Selling Shareholders The Selling Shareholders have, severally and not jointly, confirmed and approved the inclusion of its respective portion of the Offered Shares in the Offer for Sale, as set out below:

Date of corporate action/ Name of the Selling Number of Offered Shares/ Amount (in ₹ Date of consent board resolution/ Shareholder million) letter authorization letter Promoter Selling Shareholders Aequs Manufacturing 100,000 Equity Shares bearing face value of ₹ 10 May 30, 2025 May 9, 2025 Investments Private Limited each aggregating to ₹ 12.40 million Melligeri Private Family 1,323,500 Equity Shares bearing face value of ₹ May 30, 2025 May 20, 2025 Foundation 10 each aggregating to ₹ 164.11 million Investor Selling Shareholders Amicus Capital Private Equity I 7,481,908 Equity Shares bearing face value of ₹ November 13, 2025 May 13, 2025 LLP 10 each aggregating to ₹ 927.76 million Amicus Capital Partners India 754,450 Equity Shares bearing face value of ₹ 10 November 13, 2025 May 13, 2025 Fund I each aggregating to ₹ 93.55 million Amicus Capital Partners India 8,879,915 Equity Shares bearing face value of ₹ November 13, 2025 May 13, 2025 Fund II 10 each aggregating to ₹ 1,101.11 million Girija Dempo Family Private 435,656 Equity Shares bearing face value of ₹ 10 November 13, 2025 May 12, 2025 Trust each aggregating to ₹ 54.02 million Vasundhara Dempo Family 435,656 Equity Shares bearing face value of ₹ 10 November 13, 2025 May 12, 2025 Private Trust each aggregating to ₹ 54.02 million Individual Selling Shareholders 25,000 Equity Shares bearing face value of ₹ 10 Raman Subramanian May 30, 2025 - each aggregating to ₹ 3.10 million 871,308 Equity Shares bearing face value of ₹ 10 Ravindra Mariwala November 13, 2025 - each aggregating to ₹ 108.04 million In-principle listing approvals Our Company has received in-principle approvals from BSE and NSE for the listing of our Equity Shares pursuant to letters each dated July 31, 2025.

Prohibition by SEBI, RBI or governmental authorities Our Company, our Promoters, members of the Promoter Group, our Directors, the persons in control of our Corporate Promoter and each of the Selling Shareholders confirm that they are not prohibited from accessing the capital markets or debarred from buying, selling or dealing in securities under any order or direction passed by SEBI or any securities market regulator in any other jurisdiction or any authority or court.

591Compliance with the Companies (Significant Beneficial Owners) Rules, 2018 Each of our Company, our Promoters, member of our Promoter Group, and each of the Selling Shareholders, severally and not jointly, confirm that it is in compliance with the Companies (Significant Beneficial Owners) Rules, 2018, in relation to our Company, as on the date of this Prospectus.

Directors associated with the securities market Except as disclosed below, none of our Directors are associated with the securities market in any manner and there are no outstanding actions initiated by the SEBI against any of our Directors in the five years immediately

preceding the date of this Prospectus:

One of our Independent Directors, Anup Wadhawan, is a director on the board of directors of Aspero Markets Private Limited, an online bond platform provider, registered with SEBI.

Eligibility for the Offer Our Company is eligible to undertake the Offer in accordance with the eligibility criteria provided in Regulation 6(2) of the SEBI ICDR Regulations which states the following:

“An issuer not satisfying the condition stipulated in sub-regulation (1) shall be eligible to make an initial public offer only if the issue is made through the book-building process and the issuer undertakes to allot at least seventy five percent of the net offer to qualified institutional buyers and to refund the full subscription money if it fails to do so.” We are an unlisted company that does not satisfy the conditions specified in Regulation 6(1)(b) of the SEBI ICDR Regulations, and are therefore required to meet the conditions as detailed under Regulation 6(2) of the SEBI ICDR Regulations.

We are therefore required to allot not less than 75% of the Net Offer to QIBs to meet the conditions as detailed under Regulation 6(2) of the SEBI ICDR Regulations. Further, not more than 15% of the Net Offer was made available for allocation to Non-Institutional Investors of which one-third of the Non-Institutional Portion was made available for allocation to Bidders with an application size of more than ₹ 0.20 million and up to ₹ 1.00 million and two-thirds of the Non-Institutional Portion was made available for allocation to Bidders with an application size of more than ₹ 1.00 million and under-subscription in either of these two sub-categories of Non- Institutional Portion could be allocated to Bidders in the other sub-category of Non-Institutional Portion. Further, not more than 10% of the Net Offer was made available for allocation to Retail Individual Investors in accordance with the SEBI ICDR Regulations, subject to valid Bids being received at or above the Offer Price.

Our Company confirms that it is in compliance with the conditions specified in Regulation 7(1) of the SEBI ICDR Regulations, to the extent applicable and will ensure compliance with the conditions specified in Regulation 7(2) of the SEBI ICDR Regulations, to the extent applicable.

Further, in accordance with Regulation 49(1) of the SEBI ICDR Regulations, our Company ensured that the number of Allottees under the Offer shall be not less than 1,000.

Our Company is in compliance with the following conditions specified in Regulation 5 of the SEBI ICDR

Regulations:

(a) neither our Company nor our Directors or Selling Shareholders or Promoters or member of our Promoter Group, are debarred from accessing the capital markets by SEBI;

(b) neither our Promoters nor our Directors are promoters or directors of companies which are debarred from accessing the capital markets by SEBI;

(c) neither our Company nor any of our Directors or Promoters or member of the Promoter Group is a Wilful Defaulter or a Fraudulent Borrower;

(d) neither our Individual Promoter nor Directors is a Fugitive Economic Offender under Section 12 of the Fugitive Economic Offenders Act, 2018; and 592(e) as on the date of this Prospectus, other than the options to be granted in terms of the ESOP Plan 2025, there are no outstanding warrants, options or rights to convert debentures, loans or other instruments convertible into, or any other right which would entitle any person any option to receive Equity Shares.

See “Capital Structure” on page 115.

Each of the Selling Shareholders, severally and not jointly, confirm that its respective portion of the Offered Shares is in compliance with Regulation 8 and Regulation 8A of the SEBI ICDR Regulations, and it shall have held its respective portion of the Offered Shares for a period of at least one year prior to the date of filing of this Prospectus.

DISCLAIMER CLAUSE OF SEBI IT IS TO BE DISTINCTLY UNDERSTOOD THAT SUBMISSION OF THIS PROSPECTUS TO SEBI SHOULD NOT, IN ANY WAY, BE DEEMED OR CONSTRUED THAT THE SAME HAS BEEN CLEARED OR APPROVED BY SEBI. SEBI DOES NOT TAKE ANY RESPONSIBILITY EITHER FOR THE FINANCIAL SOUNDNESS OF ANY SCHEME OR THE PROJECT FOR WHICH THE OFFER IS PROPOSED TO BE MADE OR FOR THE CORRECTNESS OF THE STATEMENTS MADE OR OPINIONS EXPRESSED IN THIS PROSPECTUS. THE BOOK RUNNING LEAD MANAGERS BEING, JM FINANCIAL LIMITED, IIFL CAPITAL SERVICES LIMITED (FORMERLY KNOWN AS IIFL SECURITIES LIMITED) AND KOTAK MAHINDRA CAPITAL COMPANY LIMITED HAVE CERTIFIED THAT THE DISCLOSURES MADE IN THIS PROSPECTUS ARE GENERALLY ADEQUATE AND ARE IN CONFORMITY WITH THE SECURITIES AND EXCHANGE BOARD OF INDIA (ISSUE OF CAPITAL AND DISCLOSURE REQUIREMENTS) REGULATIONS, 2018. THIS REQUIREMENT IS TO FACILITATE INVESTORS TO TAKE AN INFORMED DECISION FOR MAKING AN INVESTMENT IN THE PROPOSED OFFER.

IT SHOULD ALSO BE CLEARLY UNDERSTOOD THAT WHILE OUR COMPANY IS PRIMARILY RESPONSIBLE FOR THE CORRECTNESS, ADEQUACY AND DISCLOSURE OF ALL RELEVANT INFORMATION IN THIS PROSPECTUS, THE BRLMS ARE EXPECTED TO EXERCISE DUE DILIGENCE TO ENSURE THAT OUR COMPANY DISCHARGES ITS RESPONSIBILITY ADEQUATELY IN THIS BEHALF AND TOWARDS THIS PURPOSE, THE BRLMS, JM FINANCIAL LIMITED, IIFL CAPITAL SERVICES LIMITED (FORMERLY KNOWN AS IIFL SECURITIES LIMITED) AND KOTAK MAHINDRA CAPITAL COMPANY LIMITED HAVE FURNISHED TO SEBI, A DUE DILIGENCE CERTIFICATE DATED MAY 31, 2025 IN THE FORMAT PRESCRIBED UNDER SCHEDULE V(AA) OF THE SECURITIES AND EXCHANGE BOARD OF INDIA (ISSUE OF CAPITAL AND DISCLOSURE REQUIREMENTS) REGULATIONS, 2018.

THE FILING OF THIS PROSPECTUS DOES NOT, HOWEVER, ABSOLVE OUR COMPANY FROM ANY LIABILITIES UNDER THE COMPANIES ACT 2013 OR FROM THE REQUIREMENT OF OBTAINING SUCH STATUTORY AND/OR OTHER CLEARANCES AS MAY BE REQUIRED FOR THE PURPOSE OF THE PROPOSED OFFER. SEBI FURTHER RESERVES THE RIGHT TO TAKE UP, AT ANY POINT OF TIME, WITH THE BRLMS, ANY IRREGULARITIES OR LAPSES IN THIS PROSPECTUS.

All legal requirements pertaining to this Offer with respect to filing of the Red Herring Prospectus with the RoC have been complied with, including in terms of Section 32 of the Companies Act 2013. All legal requirements pertaining to this Offer have been complied with at the time of filing of this Prospectus with the RoC including in terms of Sections 26, 30, 32, 33(1) and 33(2) of the Companies Act 2013.

Disclaimer from our Company, our Directors, the Selling Shareholders and the BRLMs All information shall be made available by our Company, the Selling Shareholders solely to the extent relating to themselves and their respective portion of the Offered Shares and to the extent required in relation to the Offer for Sale and the BRLMs to the public and investors at large and no selective or additional information would be available for a section of the investors in any manner whatsoever, including at road show presentations, in research or sales reports, at Bidding Centres or elsewhere.

Investors who Bid in the Offer were required to confirm and were deemed to have represented to our Company, the Selling Shareholders, the Underwriters and their respective directors, officers, agents, affiliates, and representatives that they are eligible under all applicable laws, rules, regulations, guidelines and approvals to 593acquire the Equity Shares and will not issue, sell, pledge, or transfer the Equity Shares to any person who is not eligible under any applicable laws, rules, regulations, guidelines and approvals to acquire the Equity Shares.

The BRLMs and their respective associates and affiliates, in their capacity as principals or agents, may engage in transactions with, and perform services for, our Company, our Subsidiaries, our Group Company, the Selling Shareholders and their group companies, affiliates or associates or third parties in the ordinary course of business and have engaged, or may in the future engage, in commercial banking and investment banking transactions with our Company, the Selling Shareholders and their group companies, affiliates or associates or third parties, for which they have received, and may in the future receive, compensation. As used herein, the term ‘affiliate’ means any person or entity that controls or is controlled by or is under common control with another person or entity.

Disclaimer in respect of jurisdiction This Offer was made in India to persons resident in India (including Indian nationals resident in India who are competent to contract under the Indian Contract Act, 1872), Hindu Undivided Families (“HUFs”), companies, other corporate bodies and societies registered under the applicable laws in India and authorized to invest in equity shares, Indian Mutual Funds registered with the SEBI, Indian financial institutions, commercial banks, regional rural banks, co-operative banks (subject to permission from the RBI), systemically important non-banking financial companies or trusts under the applicable trust laws, and who are authorized under their respective constitutions to hold and invest in equity shares, public financial institutions as specified under Section 2(72) of the Companies Act 2013, venture capital funds, permitted insurance companies registered with IRDAI, and pension funds with minimum corpus of ₹ 250 million registered with the Pension Fund Regulatory and Development Authority established under sub-section (1) of section 3 of the Pension Fund Regulatory and Development Authority Act, 2013, systematically important NBFCs registered with the RBI and, to permitted Non-Residents including Eligible NRIs, Alternative Investment Funds (“AIFs”), Foreign Portfolio Investors registered with SEBI (“FPIs”) and QIBs. The Red Herring Prospectus did not, however, constitute an offer to sell or an invitation to subscribe to or purchase the Equity Shares offered hereby, in any jurisdiction to any person to whom it is unlawful to make an offer or invitation in such jurisdiction. Any person into whose possession this Prospectus comes is required to inform himself or herself about, and to observe, any such restrictions.

Any dispute arising out of this Offer will be subject to the jurisdiction of appropriate court(s) at, Bengaluru, Karnataka, India only.

Neither the delivery of the Red Herring Prospectus and this Prospectus nor the offer of the Offered Shares shall, under any circumstances, create any implication that there has been no change in the affairs of our Company since the date of this Prospectus or that the information contained herein is correct as of any time subsequent to this date.

Invitations to subscribe to or purchase the Equity Shares in the Offer were made only pursuant to the Red Herring Prospectus if the recipient was in India or the preliminary offering memorandum for the Offer, which comprises the Red Herring Prospectus and the preliminary international wrap for the Offer, if the recipient was outside India.

No person outside India was eligible to Bid for Equity Shares in the Offer unless that person had received the preliminary offering memorandum for the Offer, which contained the selling restrictions for the Offer outside India.

No action has been, or will be, taken to permit a public offering in any jurisdiction where action would be required for that purpose, except that the Red Herring Prospectus has been filed with the SEBI for its observations.

Accordingly, the Equity Shares represented hereby may not be offered or sold, directly or indirectly, and the Red Herring Prospectus may not be distributed, in any jurisdiction, except in accordance with the legal requirements applicable in such jurisdiction.

Bidders were advised to ensure that any Bid from them did not exceed investment limits or maximum number of Equity Shares that could be held by them under applicable law. Further, each Bidder was required to agree in the Allotment Advice that such Bidder would not sell or transfer any Equity Shares or any economic interest therein, including any off-shore derivative instruments, such as participatory notes, issued against the Equity Shares or any similar security, other than in accordance with applicable laws.

Eligibility and Transfer Restrictions The Equity Shares offered in the Offer have not been, and will not be, registered under the U.S. Securities Act or any state securities laws in the United States, and unless so registered, was not offered or sold within 594the United States, except pursuant to an exemption from, or in a transaction not subject to, the registration requirements of the U.S. Securities Act and applicable state securities laws. Accordingly, the Equity Shares were offered and sold (i) within the United States only to persons reasonably believed to be “qualified institutional buyers” (as defined in Rule 144A under the U.S. Securities Act and referred to in this Prospectus as “U.S. QIBs”, for the avoidance of doubt, the term U.S. QIBs does not refer to a category of institutional investor defined under applicable Indian regulations and referred to in this Prospectus as “QIBs”) in transactions exempt from, or not subject to, the registration requirements of the U.S. Securities Act, and (ii) outside the United States in offshore transactions as defined in and in compliance with Regulation S under the U.S. Securities Act and the applicable laws of the jurisdiction where those offers and sales occur.

The Equity Shares have not been and will not be registered, listed or otherwise qualified in any other jurisdiction outside India and may not be offered or sold, and Bids may not be made by persons in any such jurisdiction, except in compliance with the applicable laws of such jurisdiction.

Until the expiry of 40 days after the commencement of the Offer, an offer or sale of Equity Shares within the United States by a dealer (whether or not it is participating in the Offer) may violate the registration requirements of the U.S. Securities Act, unless made pursuant to Rule 144A or another available exemption from the registration requirements of the U.S. Securities Act and in accordance with applicable state securities laws in the United States.

Eligible Investors

The Equity Shares are being offered and sold:

(a) within the United States to investors that are U.S. QIBs in transactions exempt from, or not subject to, the registration requirements of the U.S. Securities Act; and

(b) outside the United States in “offshore transactions” as defined in, and in compliance with Regulation S under the U.S. Securities Act and the applicable laws of the jurisdiction where those offers and sales occur;

and in each case who are deemed to have made the representations set forth immediately below.

Equity Shares Offered Pursuant to the Offer Within the United States Each purchaser that is acquiring the Equity Shares offered pursuant to the Offer within the United States, by its acceptance of the Red Herring Prospectus, this Prospectus and of the Equity Shares, will be deemed to have acknowledged, represented to and agreed with our Company, the Selling Shareholders and the Book Running Lead Managers that it has received a copy of the Red Herring Prospectus, this Prospectus and such other

information as it deems necessary to make an informed investment decision and that:

(a) the purchaser is authorised to consummate the purchase of the Equity Shares offered pursuant to the Offer in compliance with all applicable laws and regulations;

(b) the purchaser acknowledges that the Equity Shares offered pursuant to the Offer have not been and will not be registered under the U.S. Securities Act or with any securities regulatory authority of any state of the United States and unless so registered, may not be offered or sold within the United States except pursuant to an exemption from, or in a transaction not subject to, the registration requirements of the U.S. Securities Act;

(c) the purchaser (i) is a U.S. QIB, (ii) is aware that the sale to it is being made in a transaction exempt from, or not subject to, the registration requirements of the U.S. Securities Act, and (iii) is acquiring such Equity Shares for its own account or for the account of one or more U.S. QIBs with respect to which it exercises sole investment discretion;

(d) the purchaser is not an affiliate of our Company or a person acting on behalf of an affiliate;

(e) if, in the future, the purchaser decides to offer, resell, pledge or otherwise transfer such Equity Shares, or any economic interest therein, such Equity Shares or any economic interest therein may be offered, sold, pledged or otherwise transferred, only (A) (i) to a person whom the beneficial owner and/or any person acting on its behalf reasonably believes is a U.S. QIB in a transaction meeting the requirements of Rule 144A under the U.S. Securities Act, or (ii) in an “offshore transaction” complying with Rule 903 595or Rule 904 of Regulation S under the U.S. Securities Act; and (B) in accordance with all applicable laws, including the state securities laws in the United States. The purchaser understands that the transfer restrictions will remain in effect until our Company determines, in its sole discretion, to remove them;

(f) the Equity Shares are “restricted securities” within the meaning of Rule 144(a)(3) under the U.S.

Securities Act and no representation is made as to the availability of the exemption provided by Rule 144 under the U.S. Securities Act for resales of any such Equity Shares;

(g) the purchaser will not deposit or cause to be deposited such Equity Shares into any depositary receipt facility established or maintained by a depositary bank other than a Rule 144A restricted depositary receipt facility, so long as such Equity Shares are “restricted securities” within the meaning of Rule 144(a)(3) under the U.S. Securities Act;

(h) neither the purchaser, nor any of its affiliates (as defined in Rule 405 of the U.S. Securities Act), nor any person acting on behalf of the purchaser or any of its affiliates (as defined in Rule 405 of the U.S.

Securities Act), is acquiring the Equity Shares as a result of any “directed selling efforts” as defined in Regulation S under the U.S. Securities Act in the United States with respect to the Equity Shares or any form of “general solicitation” or “general advertising” (as defined in Regulation D under the U.S.

Securities Act) in connection with any offer or sale of the Equity Shares;

(i) the purchaser understands that such Equity Shares (to the extent they are in certificated form), unless our Company determines otherwise in accordance with applicable law, will bear a legend substantially to the

following effect: “THE EQUITY SHARES REPRESENTED HEREBY HAVE NOT BEEN, AND WILL NOT BE, REGISTERED UNDER THE U.S. SECURITIES ACT OF 1933, AS AMENDED (THE “U.S.

SECURITIES ACT”) OR WITH ANY SECURITIES REGULATORY AUTHORITY OF ANY STATE OR OTHER JURISDICTION OF THE UNITED STATES AND MAY NOT BE OFFERED, SOLD, PLEDGED OR OTHERWISE TRANSFERRED WITHIN THE UNITED STATES, EXCEPT PURSUANT TO AN EXEMPTION FROM, OR IN A TRANSACTION NOT SUBJECT TO, THE REGISTRATION REQUIREMENTS OF THE U.S. SECURITIES ACT AND APPLICABLE STATE SECURITIES LAW AND ACCORDINGLY, THE EQUITY SHARES MAY BE OFFERED, SOLD, PLEDGED OR OTHERWISE TRANSFERRED (1) WITHIN THE UNITED STATES, SOLELY TO A PERSON WHOM THE SELLER OR ANY PERSON ACTING ON ITS BEHALF REASONABLY BELIEVES IS A QUALIFIED INSTITUTIONAL BUYER WITHIN THE MEANING OF RULE 144A UNDER THE U.S.

SECURITIES ACT IN A TRANSACTION MEETING THE REQUIREMENTS OF RULE 144A UNDER THE U.S. SECURITIES ACT OR ANOTHER EXEMPTION FROM, OR TRANSACTION NOT SUBJECT TO, THE REGISTRATION REQUIREMENTS OF THE U.S.

SECURITIES ACT, OR (2) OUTSIDE THE UNITED STATES IN AN “OFFSHORE TRANSACTION” AS DEFINED IN AND IN COMPLIANCE WITH REGULATION S UNDER THE U.S. SECURITIES ACT, AND THE APPLICABLE LAWS OF THE JURISDICTIONS WHERE THOSE OFFERS AND SALES OCCUR”

(j) our Company will not recognise any offer, sale, pledge or other transfer of such Equity Shares made other than in compliance with the above-stated restrictions; and

(k) the purchaser acknowledges that our Company, the Selling Shareholders, the Book Running Lead Managers, their respective affiliates and others will rely upon the truth and accuracy of the foregoing acknowledgements, representations and agreements and agrees that, if any of such acknowledgements, representations and agreements deemed to have been made by virtue of its purchase of such Equity Shares are no longer accurate, it will promptly notify our Company, the Selling Shareholders and the Book Running Lead Managers, and if it is acquiring any of such Equity Shares as a fiduciary or agent for one or more accounts, it represents that it has sole investment discretion with respect to each such account and that it has full power to make the foregoing acknowledgements, representations and agreements on behalf of such account.

All Other Equity Shares Offered and Sold in the Offer Each purchaser that is acquiring the Equity Shares offered pursuant to the Offer outside the United States, by its acceptance of the Red Herring Prospectus, this Prospectus and of the Equity Shares offered pursuant to the Offer, 596will be deemed to have acknowledged, represented to and agreed with our Company, the Selling Shareholders and the Book Running Lead Managers that it has received a copy of the Red Herring Prospectus, this Prospectus

and such other information as it deems necessary to make an informed investment decision and that:

(a) the purchaser is authorised to consummate the purchase of the Equity Shares offered pursuant to the Offer in compliance with all applicable laws and regulations;

(b) the purchaser acknowledges that the Equity Shares offered pursuant to the Offer have not been and will not be registered under the U.S. Securities Act or with any securities regulatory authority of any state of or other jurisdiction of the United States and accordingly, may not be offered, resold, pledged or transferred within the United States except pursuant to an exemption from, or in a transaction not subject to, the registration requirements of the U.S. Securities Act;

(c) the purchaser is purchasing the Equity Shares offered pursuant to the Offer in an offshore transaction meeting the requirements of Rule 903 of Regulation S under the U.S. Securities Act;

(d) the purchaser and the person, if any, for whose account or benefit the purchaser is acquiring the Equity Shares offered pursuant to the Offer, was located outside the United States at the time (i) the offer for such Equity Shares was made to it and (ii) when the buy order for such Equity Shares was originated and continues to be located outside the United States and has not purchased such Equity Shares for the account or benefit of any person in the United States or entered into any arrangement for the transfer of such Equity Shares or any economic interest therein to any person in the United States;

(e) the purchaser is not an affiliate of our Company or a person acting on behalf of an affiliate;

(f) if, in the future, the purchaser decides to offer, resell, pledge or otherwise transfer such Equity Shares, or any economic interest therein, such Equity Shares or any economic interest therein may be offered, sold, pledged or otherwise transferred only (A) (i) to a person whom the beneficial owner and/or any person acting on its behalf reasonably believes is a U.S. QIB in a transaction meeting the requirements of Rule 144A, or (ii) in an offshore transaction complying with Rule 903 or Rule 904 of Regulation S under the U.S. Securities Act and (B) in accordance with all applicable laws, including the securities laws of the States of the United States. The purchaser understands that the transfer restrictions will remain in effect until our Company determines, in its sole discretion, to remove them;

(g) neither the purchaser nor any of its affiliates (as defined in Rule 405 of the U.S. Securities Act), nor any person acting on behalf of the purchaser or any of its affiliates (as defined in Rule 405 of the U.S.

Securities Act), is acquiring the Equity Shares as a result of any “directed selling efforts” as defined in Regulation S under the U.S. Securities Act in the United States with respect to the Equity Shares;

(h) the purchaser understands that such Equity Shares (to the extent they are in certificated form), unless our Company determine otherwise in accordance with applicable law, will bear a legend substantially to the

following effect: “THE EQUITY SHARES REPRESENTED HEREBY HAVE NOT BEEN AND WILL NOT BE REGISTERED UNDER THE U.S. SECURITIES ACT OF 1933, AS AMENDED (THE “U.S.

SECURITIES ACT”) OR WITH ANY SECURITIES REGULATORY AUTHORITY OF ANY STATE OR OTHER JURISDICTION OF THE UNITED STATES AND MAY NOT BE OFFERED, SOLD, PLEDGED OR OTHERWISE TRANSFERRED EXCEPT (1) TO A PERSON WHOM THE SELLER OR ANY PERSON ACTING ON ITS BEHALF REASONABLY BELIEVES IS A QUALIFIED INSTITUTIONAL BUYER WITHIN THE MEANING OF RULE 144A UNDER THE U.S. SECURITIES ACT IN A TRANSACTION MEETING THE REQUIREMENTS OF RULE 144A UNDER THE U.S. SECURITIES ACT, OR (2) IN AN OFFSHORE TRANSACTION COMPLYING WITH RULE 903 OR RULE 904 OF REGULATION S UNDER THE U.S. SECURITIES ACT, IN EACH CASE IN ACCORDANCE WITH ANY APPLICABLE SECURITIES LAWS OF ANY STATE OF THE UNITED STATES.”

(i) our Company will not recognise any offer, sale, pledge or other transfer of such Equity Shares made other than in compliance with the above-stated restrictions; and

(j) the purchaser acknowledges that our Company, the Selling Shareholders, the Book Running Lead Managers, their respective affiliates and others will rely upon the truth and accuracy of the foregoing acknowledgements, representations and agreements and agrees that, if any of such acknowledgements, 597representations and agreements deemed to have been made by virtue of its purchase of such Equity Shares are no longer accurate, it will promptly notify our Company, the Selling Shareholders and the Book Running Lead Managers, and if it is acquiring any of such Equity Shares as a fiduciary or agent for one or more accounts, it represents that it has sole investment discretion with respect to each such account and that it has full power to make the foregoing acknowledgements, representations and agreements on behalf of such account.

Bidders are advised to ensure that any Bid from them does not exceed investment limits or maximum number of Equity Shares that can be held by them under applicable law. Further, each Bidder where required must agree in the Allotment Advice that such Bidder will not sell or transfer any Equity Shares or any economic interest therein, including any offshore derivative instruments, such as participatory notes, issued against the Equity Shares or any similar security, other than in accordance with applicable laws.

Disclaimer clause of BSE As required, a copy of the Pre-filed Draft Red Herring Prospectus was submitted to BSE. The disclaimer clause as intimated by BSE to our Company, post scrutiny of the Pre-filed Draft Red Herring Prospectus, is set forth

below: “BSE Limited (“the Exchange”) has given vide its letter dated July 31, 2025, permission to this Company to use the Exchange’s name in this offer document as one of the stock exchanges on which this company’s securities are proposed to be listed. The Exchange has scrutinized this offer document for its limited internal purpose of deciding on the matter of granting the aforesaid permission to this Company. The Exchange does not in any manner;- a. warrant, certify or endorse the correctness or completeness of any of the contents of this offer document;

or b. warrant that this Company’s securities will be listed or will continue to be listed on the Exchange; or c. take any responsibility for the financial or other soundness of this Company, its promoters, its management or any scheme or project of this Company.

and it should not for any reason be deemed or construed that this offer document has been cleared or approved by the Exchange. Every person who desires to apply for or otherwise acquired any securities of this Company may do so pursuant to independent inquiry, investigation and analysis and shall not have any claim against the Exchange whatsoever by any reason of any loss which may be suffered by such person consequent to or in connect with such subscription/acquisition whether by reason of anything stated or omitted to be stated herein or for any other reason whatsoever.” Disclaimer clause of NSE As required, a copy of the Pre-filed Draft Red Herring Prospectus was submitted to NSE. The disclaimer clause as intimated by NSE to our Company, post scrutiny of the Pre-filed Draft Red Herring Prospectus is set forth

below: “As required, a copy of this Offer Document has been submitted to National Stock Exchange of India Limited (hereinafter referred to as NSE). NSE has given vide its letter Ref.: NSE/LIST/5487 dated July 31, 2025, permission to the Issuer to use the Exchange’s name in this Offer Document as one of the Stock Exchanges on which this Issuer’s securities are proposed to be listed. The Exchange has scrutinized this draft offer document for its limited internal purpose of deciding on the matter of granting the aforesaid permission to this Issuer. It is to be distinctly understood that the aforesaid permission given by NSE should not in any way be deemed or construed that the offer document has been cleared or approved by NSE; nor does it in any manner warrant, certify or endorse the correctness or completeness of any of the contents of this offer document; nor does it warrant that this Issuer’s securities will be listed or will continue to be listed on the Exchange; nor does it take any responsibility for the financial or other soundness of this Issuer, its promoters, its management or any scheme or project of this Issuer.

Every person who desires to apply for or otherwise acquire any securities of this Issuer may do so pursuant to independent inquiry, investigation and analysis and shall not have any claim against the Exchange whatsoever by reason of any loss which may be suffered by such person consequent to or in connection with such subscription /acquisition whether by reason of anything stated or omitted to be stated herein or any other reason whatsoever.” 598Listing The Equity Shares proposed to be Allotted pursuant to the Red Herring Prospectus and this Prospectus are proposed to be listed on the BSE and the NSE. Applications will be made to the Stock Exchanges for obtaining permission to deal in and for an official quotation of the Equity Shares being offered and transferred in the Offer and NSE is the Designated Stock Exchange, with which the Basis of Allotment will be finalized for the Offer.

If the permission to deal in and for an official quotation of the Equity Shares is not granted by the Stock Exchanges, our Company shall forthwith repay, without interest, all monies received from the Bidders in pursuance of the Red Herring Prospectus in accordance with applicable law. Our Company shall ensure that all steps for the completion of the necessary formalities for listing and commencement of trading of Equity Shares at the Stock Exchanges are taken within three Working Days of the Bid/Offer Closing Date or such other period as may be prescribed by the SEBI. If our Company does not Allot the Equity Shares within two Working Days from the Bid/Offer Closing Date or within such timeline as prescribed by SEBI, all amounts received in the Public Offer Accounts will be transferred to the Refund Account and it shall be utilised to repay, without interest, all monies received from Bidders, failing which interest shall be due to be paid to the Bidders as prescribed under applicable law. If such money is not repaid within the prescribed time, then our Company and every officer in default shall be liable to repay the money, with interest, as prescribed under applicable law. Any expense incurred by our Company on behalf of the Selling Shareholders with regard to interest on such refunds will be reimbursed by the Selling Shareholders in proportion to its respective portion of the Offered Shares. For the avoidance of doubt, subject to applicable law, the Selling Shareholders shall not be responsible to pay and/or reimburse any expenses towards refund or any interest thereon for any delay, unless such failure or default or delay, as the case may be, is by, and is directly attributable to, an act or omission, of the Selling Shareholders and such liability shall be limited to the extent of its respective portion of the Offered Shares.

Impersonation Attention of the Bidders is specifically drawn to the provisions of Section 38(1) of the Companies Act 2013,

which is reproduced below: “Any person who –

(a) makes or abets making of an application in a fictitious name to a company for acquiring, or subscribing for, its securities, or

(b) makes or abets making of multiple applications to a company in different names or in different combinations of his name or surname for acquiring or subscribing for its securities; or

(c) otherwise induces directly or indirectly a company to allot, or register any transfer of, securities to him, or to any other person in a fictitious name, shall be liable for action under Section 447.” The liability prescribed under Section 447 of the Companies Act 2013 involving an amount of at least ₹ 1 million or 1% of the turnover of our Company, whichever is lower, includes imprisonment for a term of not less than six months extending up to 10 years (provided that where the fraud involves public interest, such term shall not be less than three years) and fine of an amount not less than the amount involved in the fraud, extending up to three times of such amount. In case the fraud involves (i) an amount which is less than ₹ 1 million or 1% of the turnover of our Company, whichever is lower; and (ii) does not involve public interest, then such fraud is punishable with an imprisonment for a term extending up to five years or a fine of an amount extending up to ₹ 5 million or with both.

Consents Consents in writing of the Selling Shareholders, our Directors, our Company Secretary and Compliance Officer, Chief Financial Officer, the legal counsel to our Company, the bankers to our Company, lenders to our Company (wherever applicable), industry report provider, Statutory Auditors, independent chartered accountant, the BRLMs, Registrar to the Offer, the Syndicate Members, Bankers to the Offer (Escrow Collection Bank, Public Offer Account Bank, Sponsor Bank(s) and Refund Bank) and the Monitoring Agency to act in their respective capacities, have been obtained and filed along with a copy of the Red Herring Prospectus with the RoC as required under the Companies Act 2013, and such consents were not withdrawn up to the time of filing of this Prospectus with the RoC.

599Experts Our Company has received written consent dated November 26, 2025, from B S R & Co. LLP, Chartered Accountants to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013 to the extent applicable, and in their capacity as our Statutory Auditors, and in respect of their (i) examination report dated November 14, 2025, on our Restated Consolidated Financial Information; and (ii) report dated November 14, 2025, on the statement of possible special tax benefits available to (a) our Company and its Shareholders; (b) certain of our Material Subsidiaries, being, AeroStructures Manufacturing India Private Limited and Aequs Engineered Plastics Private Limited, included in this Prospectus. However, the term “expert” shall not be construed to mean an “expert” as defined under the U. S. Securities Act.

Our Company has received written consent from Martin Bahl, CPA, Bahl & Co., P.C in their report dated November 13, 2025, on the statement of possible special tax benefits available to certain of our Material Subsidiaries, being, (a) Aequs Aero Machine Inc.; and (b) Aequs Oil & Gas LLC, included in this Prospectus, to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013 to the extent applicable, and in their capacity as certified public accountants in relation to the report. However, the term “expert” shall not be construed to mean an “expert” as defined under the U. S. Securities Act.

Our Company has received written consent from PKF Arsilon in their report dated November 12, 2025, on the statement of possible special tax benefits available to one of our Material Subsidiaries, being Aequs Aerospace France SAS, included in this Prospectus, to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013 to the extent applicable, and in their capacity as the statutory auditor. However, the term “expert” shall not be construed to mean an “expert” as defined under the U. S. Securities Act.

Our Company has received written consent from KC Legal in their report dated November 13, 2025 on the statement of possible special tax benefits available to one of our Material Subsidiaries, being, Aequs Aerospace B.V., included in this Prospectus, to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013 to the extent applicable. However, the term “expert” shall not be construed to mean an “expert” as defined under the U. S. Securities Act.

Our Company has received written consent dated May 31, 2025 from Manian & Rao, Chartered Accountants, bearing firm registration number 001983S, to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and an “expert”, as defined under Section 2(38) of the Companies Act 2013 in respect of various certifications issued by them in their capacity as independent chartered accountant to our Company and details derived therefrom as included in this Prospectus.

Our Company has received written consent from Vishvakarma Consultancy Services Private Limited as part of the certification issued by them dated November 16, 2025 to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013, in their capacity as independent chartered engineer to our Company.The above-mentioned consents have not been withdrawn as on the date of this Prospectus.

Particulars regarding public or rights issues during the last five years Except as disclosed in the section “Capital Structure” on page 115, there has been no public issues or rights issues undertaken by our Company, during the five years preceding the date of this Prospectus.

Commission or brokerage on previous issues in the last five years Since this is an initial public offering of the Equity Shares, no sum has been paid or has been payable as commission or brokerage for subscribing to or procuring or agreeing to procure public subscription for any of our Equity Shares in the five years immediately preceding the date of this Prospectus.

Capital issues in the preceding three years, our listed group companies, subsidiaries and associates of our Company Except as disclosed in “Capital Structure – Notes to Capital Structure” on page 116, our Company has not made any capital issues during the three years immediately preceding the date of this Prospectus. Further, as on the date 600of this Prospectus, our Company does not have any associate entities, listed Group Companies or listed Subsidiaries.

Particulars regarding public/rights issue of our Company and performance vis-à-vis objects Except as disclosed in the section “Capital Structure” on page 115, there has been no public issues / rights issues undertaken by our Company, during the five years preceding the date of this Prospectus.

Performance vis-à-vis objects – Public/rights issue of the listed Promoter / Subsidiaries of our Company None our Subsidiaries or Promoters are listed on any stock exchange.

601Price information of past issues handled by the BRLMs JM Financial Limited

1. Price information of past issues (during the current Fiscal and two Fiscals preceding the current Fiscal) handled by JM Financial Sr. Issue name Issue Size Issue Listing Opening +/- % change in closing +/- % change in closing +/- % change in closing No. (₹ million) price Date price on price, [+/- % change in price, [+/- % change in price, [+/- % change in (₹) Listing Date closing benchmark] - closing benchmark] - closing benchmark] - (in ₹) 30th calendar days from 90th calendar days from 180th calendar days from listing listing listing

1. Capillary Technologies India 8,775.01 577.00 November 21, 2025 560.00 Not Applicable Not Applicable Not Applicable Limited#10

2. Tenneco Clean Air India Limited* 36,000.00 397.00 November 19, 2025 505.00 Not Applicable Not Applicable Not Applicable

3. Emmvee Photovoltaic Power Limited* 29,000.00 217.00 November 18, 2025 217.00 Not Applicable Not Applicable Not Applicable

4. Canara HSBC Life Insurance Company 25,159.50 106.00 October 17, 2025 106.00 13.50% [0.78%] Not Applicable Not Applicable Limited*8

5. Rubicon Research Limited*9 13,775.00 485.00 October 16, 2025 620.00 47.18% [1.27%] Not Applicable Not Applicable

6. Canara Robeco Asset Management 13,261.26 266.00 October 16, 2025 280.25 9.81% [1.27%] Not Applicable Not Applicable Limited*

7. Wework India Management Limited*7 29,996.43 648.00 October 10, 2025 650.00 -2.48% [0.82%] Not Applicable Not Applicable

8. Urban Company Limited*11 19,000.00 103.00 September 17, 2025 162.25 53.83% [1.01%] Not Applicable Not Applicable

9. Vikram Solar Limited* 20,793.69 332.00 August 26, 2025 338.00 -1.48% [1.40%] -13.25% [5.49%] Not Applicable

10. JSW Cement Limited* 36,000.00 147.00 August 14, 2025 153.50 1.17% [1.96%] -16.64% [4.32%] Not Applicable

Source: www.nseindia.com and www.bseindia.com # BSE as Designated Stock Exchange * NSE as Designated Stock Exchange

Notes:

1. Opening price information as disclosed on the website of the designated stock exchange.

2. Change in closing price over the issue/offer price as disclosed on designated stock exchange.

3. For change in closing price over the closing price as on the listing date, the CNX NIFTY or S&P BSE SENSEX is considered as the Benchmark Index as per the designated stock exchange disclosed by the respective Issuer at the time of the issue, as applicable.

4. In case of reporting dates falling on a trading holiday, values for the trading day immediately preceding the trading holiday have been considered.

5. 30th calendar day has been taken as listing date plus 29 calendar days; 90th calendar day has been taken as listing date plus 89 calendar days; 180th calendar day has been taken a listing date plus 179 calendar days.

6. Restricted to last 10 issues.

7. A discount of Rs. 60 per equity share was offered to eligible employees bidding in the employee reservation portion.

8. A discount of Rs. 10 per equity share was offered to eligible employees bidding in the employee reservation portion.

9. A discount of Rs. 46 per equity share was offered to eligible employees bidding in the employee reservation portion.

10. A discount of Rs. 52 per Equity Share was offered to eligible employees bidding in the employee reservation portion.

11. A discount of Rs. 9 per equity share was offered to eligible employees bidding in the employee reservation portion.

6022. Summary statement of price information of past issues (during the current Fiscal and two Fiscals preceding the current Fiscal) handled by JM Financial Limited Financial Total Total funds Nos. of IPOs trading at discount Nos. of IPOs trading at premium Nos. of IPOs trading at discount Nos. of IPOs trading at premium Year no. of raised on as on 30th calendar days from on as on 30th calendar days from as on 180th calendar days from as on 180th calendar days from IPOs (₹ Millions) listing date listing date listing date listing date Over Between Less than Over Between Less than Over Between Less than Over Between Less than 50% 25% - 25% 50% 25%- 25% 50% 25%- 25% 50% 25%- 25% 50% 50% 50% 50% 2025-2026 22 5,24,353.14 1 1 7 - 4 6 - - 1 1 - - 2024-2025 13 2,55,434.10 - - 5 5 2 1 1 3 1 4 1 2 2023-2024 24 2,88,746.72 - - 7 4 5 8 - - 5 7 5 7 IIFL Capital Services Limited (formerly known as IIFL Securities Limited)

1. Price information of past issues (during the current Fiscal and two Fiscals preceding the current Fiscal) handled by IIFL Capital Services Limited (formerly known as IIFL Securities Limited) Sr. Issue name Issue Size Issue Designated Stock Listing Opening +/- % change in +/- % change in +/- % change in No. (₹ million) price Exchange as Date price on closing closing closing price^, [+/- % (₹) disclosed in the Listing Date Price^, [+/- % change price^, [+/- % change change in red herring (in ₹) in closing benchmark] in closing benchmark] closing benchmark] - prospectus filed - 30th calendar days - 90th calendar days 180th calendar days from listing from listing from listing

1. iValue Infosolutions Limited 5,602.95 299.00 NSE September 25, 284.95 -13.01%, [+3.63%] N.A. N.A.

2025

2. GK Energy Limited 4,642.60 153.00 NSE September 26, 171.00 +44.81%, [+4.63%] N.A. N.A.

2025

3. Ganesh Consumer Products 4,087.98 322.00(1) BSE September 29, 293.95 -12.05%, [+5.31%] N.A. N.A.

Limited 2025

4. Seshaasai Technologies Limited 8,130.74 423.00(2) BSE September 30, 436.00 -11.45%, [+5.89%] N.A. N.A.

2025

5. Tata Capital Limited 155,118.7 326.00 NSE October 13, 2025 330.00 -0.11%, [+1.85%] N.A. N.A.

6. Rubicon Research Limited 13,775.00 485.00(3) NSE October 16, 2025 620.00 +47.18%, [+1.27%] N.A. N.A.

7. Studds Accessories Limited 4,554.88 585.00 BSE November 7, 2025 570.00 N.A. N.A. N.A.

8. Emmvee Photovoltaic Power 29,000.00 217.00 NSE November 18, 217.00 N.A. N.A. N.A.

Limited 2025

9. Capillary Technologies India 8,775.01 577.00(4) BSE November 21, 560.00 N.A. N.A. N.A.

Limited 2025

10. Sudeep Pharma Limited 8,950.00 593.00 NSE November 28, 730.00 N.A. N.A. N.A.

2025

Source: www.nseindia.com and www.bseindia.com Notes 603(1) A discount of Rs. 30 per equity share was offered to eligible employees bidding in the employee reservation portion.

(2) A discount of Rs. 40 per equity share was offered to eligible employees bidding in the employee reservation portion.

(3) A discount of Rs. 46 per equity share was offered to eligible employees bidding in the employee reservation portion.

(4) A discount of Rs. 52 per equity share was offered to eligible employees bidding in the employee reservation portion. *Benchmark Index taken as NIFTY 50 or S&P BSE SENSEX, as applicable. Price of the designated stock exchange as disclosed by the respective issuer at the time of the issue has been considered for all of the above calculations. The 30th, 90th and 180th calendar day from listed day have been taken as listing day plus 29, 89 and 179 calendar days, except wherever 30th /90th / 180th calendar day from listing day is a holiday, the closing data of the previous trading day has been considered. % change taken against the Issue Price in case of the Issuer. NA means Not Applicable. The above past price information is only restricted to past 10 initial public offers.

2. Summary statement of price information of past issues (during the current Fiscal and two Fiscals preceding the current Fiscal) handled by IIFL Capital Services Limited (formerly known as IIFL Securities Limited) Financial Total Total funds Nos. of IPOs trading at discount Nos. of IPOs trading at premium Nos. of IPOs trading at discount Nos. of IPOs trading at premium Year no. of raised on as on 30th calendar days from on as on 30th calendar days from as on 180th calendar days from as on 180th calendar days from IPOs (₹ Millions) listing date listing date listing date listing date Over Between Less than Over Between Less than Over Between Less than Over Between Less than 50% 25% - 25% 50% 25%- 25% 50% 25%- 25% 50% 25%- 25% 50% 50% 50% 50% 2023-24 15 1,54,777.80 - - 4 3 4 4 - - 1 5 4 5 2024-25 16 4,81,737.17 - - 1 6 4 5 - 2 - 6 4 4 2025-26 20 4,96,868.87 - 1 5 1 4 5 - - 1 - - 1

Source: www.nseindia.com; www.bseindia.com, as applicable

Note: Data for number of IPOs trading at premium/discount taken at closing price of the designated stock exchange as disclosed by the respective issuer at the time of the issue has been considered on the respective date. In case any of the days falls on a non-trading day, the closing price on the previous trading day has been considered.

NA means Not Applicable.

Kotak Mahindra Capital Company Limited

1. Price information of past issues (during the current Fiscal and two Fiscals preceding the current Fiscal) handled by Kotak Mahindra Capital Company Limited S. Issue name Issue size Issue Listing date Opening +/- % change in +/- % change in +/- % change in No. (₹ million) price (₹) price on closing price, [+/- % closing price, [+/- % closing price, [+/- % listing date change in closing change in closing change in closing (in ₹) benchmark]- 30th benchmark]- 90th benchmark]- 180th calendar days from calendar days from calendar days from listing listing listing

1. Physicswallah Limited^ 34,800.00 109.001 November 18, 2025 145.00 Not applicable Not applicable Not applicable

2. Emmvee Photovoltaic Power Not applicable Not applicable Not applicable 29,000.00 217.00 November 18, 2025 217.00 Limited^

3. Billionbrains Garage Ventures Not applicable Not applicable Not applicable 66,323.01 100.00 November 12, 2025 112.00 Limited^

4. Lenskart Solutions Limited^ 72,780.15 402.002 November 10, 2025 395.00 Not applicable Not applicable Not applicable 604S. Issue name Issue size Issue Listing date Opening +/- % change in +/- % change in +/- % change in No. (₹ million) price (₹) price on closing price, [+/- % closing price, [+/- % closing price, [+/- % listing date change in closing change in closing change in closing (in ₹) benchmark]- 30th benchmark]- 90th benchmark]- 180th calendar days from calendar days from calendar days from listing listing listing

5. Orkla India Limited# 16,673.3 730.003 November 6, 2025 751.50 -13.60%, [+2.88%] Not applicable Not applicable

6. Tata Capital Limited^ 155,118.70 326.00 October 13, 2025 330.00 -0.11%, [+1.85%] Not applicable Not applicable

7. WeWork India Management -2.48%, [+0.82%] Not applicable Not applicable 29,996.43 648.004 October 10, 2025 650.00 Limited^

8. Urban Company Limited^ 19,000.00 103.005 September 17, 2025 162.25 +53.83%, [+1.01%] Not applicable Not applicable

9. Bluestone Jewellery and +15.13%, [+1.40%] +11.17%, [+3.72%] Not applicable 15,406.50 517.00 August, 19, 2025 510.00 Lifestyle Limited^

10. JSW Cement Limited^ 36,000.00 147.00 August, 14, 2025 153.50 +1.17%, [+1.96%] -16.64%, [+4.32%] Not applicable

Source: www.nseindia.com; www.bseindia.com ^ NSE as designated stock exchange # BSE as designated stock exchange

Notes:

1. In Physicswallah Limited, the issue price to eligible employees was ₹ 99 after a discount of ₹ 10 per equity share.

2. In Lenskart Solutions Limited, the issue price to eligible employees was ₹ 383 after a discount of ₹ 19 per equity share

3. In Orkla India Limited, the issue price to eligible employees was ₹ 661 after a discount of ₹ 69 per equity share

4. In WeWork India Management Limited, the issue price to eligible employees was ₹ 588 after a discount of ₹ 60 per equity share

5. In Urban Company Limited, the issue price to eligible employees was ₹ 94 after a discount of ₹ 9 per equity share

6. In the event any day falls on a holiday, the price/index of the immediately preceding trading day has been considered.

7. The 30th, 90th, 180th calendar days from listed day have been taken as listing day plus 29, 89 and 179 calendar days.

8. Designated Stock Exchange as disclosed by the respective Issuer at the time of the issue has been considered for disclosing the price information.

9. Restricted to last 10 equity initial public issues.

2. Summary statement of price information of past issues (during the current Fiscal and two Fiscals preceding the current Fiscal) handled by Kotak Mahindra Capital Company Limited Total amount No. of IPOs trading at premium Total no. No. of IPOs trading at discount – No. of IPOs trading at premium No. of IPOs trading at discount – Fiscal of funds raised – 180th calendar days from of IPOs 30th calendar days from listing – 30th calendar days from listing 180th calendar days from listing (₹ million) listing Over Between Less than Over Between Less than Over Between Less than Over Between Less than 50% 25-50% 25% 50% 25-50% 25% 50% 25-50% 25% 50% 25-50% 25% 2025-26 13 535,923.64 - - 4 1 - 4 - - 1 - - - 2024-25 18 999,474.07 - - 3 2 7 6 1 1 5 4 3 4 2023-24 11 179,436.83 - - - 2 4 5 - - - 7 3 1

Notes:

1. The information is as on the date of this Prospectus.

2. The information for each of the financial years is based on issues listed during such financial year.

605Track record of past issues handled by the Book Running Lead Managers For details regarding the track record of the Book Running Lead Managers, as specified in circular (CIR/MIRSD/1/2012) dated January 10, 2012 issued by SEBI, please see the websites of the Book Running Lead Managers, as provided in the table below:

S. No. Name of the Book Running Lead Manager Website QR code

1. JM Financial Limited www.jmfl.com

2. IIFL Capital Services Limited (formerly known as www.iiflcapital.com IIFL Securities Limited)

3. Kotak Mahindra Capital Company Limited https://investmentbank.kotak.co m/ For further details in relation to the BRLMs, see “General Information – Book Running Lead Managers” on page 107.

Stock Market Data of the Equity Shares This being the initial public offering of the Equity Shares, the Equity Shares are not listed on any stock exchange as on the date of this Prospectus, and accordingly, no stock market data is available for the Equity Shares.

Mechanism for Redressal of Investor Grievances The Registrar Agreement provides for retention of records with the Registrar to the Offer for a minimum period of eight years from the date of listing and commencement of trading of the Equity Shares on the Stock Exchanges, in order to enable the investors to approach the Registrar to the Offer for redressal of their grievances.

Bidders may contact our Company Secretary and Compliance Officer and/or the Registrar to the Offer in case of any pre-Offer or post-Offer related problems such as non-receipt of Allotment Advice, non-credit of Allotted Equity Shares in the respective beneficiary account, non-receipt of refund orders or non-receipt of funds by electronic mode, etc. For all Offer related queries and for redressal of complaints, investors may also write to the BRLMs.

All Offer related grievances, other than those of Anchor Investors may be addressed to the Registrar to the Offer with a copy to the relevant Designated Intermediary with whom the ASBA Form was submitted, giving full details such as name of the sole or First Bidder, ASBA number, Bidder’s DP ID, Client ID, PAN, address of Bidder, number of Equity Shares applied for, ASBA Account number in which the amount equivalent to the Bid Amount was blocked or the UPI ID (for UPI Bidders), date of ASBA Form, and the name and address of the relevant Designated Intermediary where the Bid was submitted. Further, the Bidder shall enclose the Acknowledgment Slip or the application number from the Designated Intermediary in addition to the documents or information mentioned hereinabove. All grievances relating to Bids submitted through Registered Brokers may be addressed to the Stock Exchanges with a copy to the Registrar to the Offer.

All Offer related grievances of the Anchor Investors may be addressed to the Registrar to the Offer, giving full details such as the name of the sole or first Bidder, Anchor Investor Application Form number, Bidders’ DP ID, Client ID, PAN, date of the Anchor Investor Application Form, address of the Bidder, number of the Equity Shares applied for, Bid Amount paid on submission of the Anchor Investor Application Form and the name and address of the BRLMs where the Anchor Investor Application Form was submitted by the Anchor Investor.

606In terms of SEBI ICDR Master Circular and any subsequent circulars, as applicable, issued by SEBI, any ASBA Bidder whose Bid has not been considered for Allotment, due to failure on the part of any SCSB, shall have the option to seek redressal of the same within three months of the date of listing of the Equity Shares with the concerned SCSB. SCSBs are required to resolve these complaints within 15 days, failing which the concerned SCSB would have to pay interest at the rate of 15% per annum for any delay beyond this period of 15 days.

Separately, pursuant to the SEBI ICDR Master Circular, the following compensation mechanism shall be applicable for investor grievances in relation to Bids made through the UPI Mechanism, for public issues opening on or after May 1, 2021 for which the relevant SCSBs shall be liable to compensate the investor:

Scenario Compensation amount Compensation period Delayed unblock for ₹ 100 per day or 15% per annum of the From the date on which the request for cancelled/withdrawn/deleted Bid Amount, whichever is higher cancellation/withdrawal/deletion is applications placed on the bidding platform of the Stock Exchanges till the date of actual unblock Blocking of multiple amounts for the 1. Instantly revoke the blocked funds From the date on which multiple same Bid made through the UPI other than the original Bid Amount; amounts were blocked till the date of Mechanism and actual unblock

2. ₹ 100 per day or 15% per annum of the total cumulative blocked amount except the original Bid Amount, whichever is higher Blocking more amount than the Bid 1. Instantly revoke the difference From the date on which the funds to the Amount amount, i.e., the blocked amount less excess of the Bid Amount were the Bid Amount; and blocked till the date of actual unblock

2. ₹ 100 per day or 15% per annum of the difference amount, whichever is higher Delayed unblock for non ₹ 100 per day or 15% per annum of the Three working days after Bid/Offer Allotted/partially Allotted applications Bid Amount, whichever is higher Closing Date till the date of actual unblock Further, in the event there is a delay in redressal of the investor grievance, the BRLMs shall compensate the investors at the rate higher of ₹ 100 or 15% per annum of the application amount. The compensation shall be payable for the period ranging from the day on which the investor grievance is received till the date of actual unblock.

In case of any delay in redressal of the investor grievance in relation to unblocking of amounts in the ASBA Accounts (including amounts blocked through the UPI Mechanism) exceeding two Working Days from the Bid/Offer Closing Date, the Bidder shall be compensated by the intermediary responsible for causing such delay in unblocking in accordance with applicable law. Further, investors shall be entitled to compensation in the manner specified in the SEBI ICDR Master Circular in case of delays in resolving investor grievances in relation to blocking/unblocking of funds.

Further, in terms of SEBI ICDR Master Circular, the payment of processing fees to the SCSBs shall be undertaken pursuant to an application made by the SCSBs to the BRLMs, and such application shall be made only after (i) unblocking of application amounts for each application received by the SCSB has been fully completed, and (ii) applicable compensation relating to investor complaints has been paid by the SCSB.

Our Company, the BRLMs and the Registrar to the Offer accept no responsibility for errors, omissions, commission of any acts of the Designated Intermediaries, including any defaults in complying with its obligations under the SEBI ICDR Regulations.

For grievance redressal contact details of the BRLMs pursuant to the SEBI ICDR Master Circular, see “Offer Procedure – General Instructions” on page 636.

Disposal of Investor Grievances by our Company We estimate that the average time required by our Company and/or the Registrar to the Offer for the redressal of routine investor grievances shall be seven to ten Working Days from the date of receipt of the complaint. In case of non-routine complaints and complaints where external agencies are involved, our Company will seek to redress these complaints as expeditiously as possible.

607Our Company has appointed Ravi Mallikarjun Hugar as the Company Secretary and Compliance Officer of our Company. For details, see “General Information – Company Secretary and Compliance Officer” on page 105.

Our Company has obtained SCORES authentication in compliance with the SEBI circular (CIR/OIAE/1/2013) dated April 17, 2013, the SEBI circular (CIR/OIAE/1/2014) dated December 18, 2014, the SEBI circular (SEBI/HO/OIAE/IGRD/CIR/P/2021/642) dated October 14, 2021, SEBI Circular SEBI/HO/OIAE/IGRD/P/CIR/2022/0150 dated November 7, 2022 and SEBI circular bearing number SEBI/HO/OIAE/IGRD/CIR/P/2023/156 dated September 20, 2023 in relation to redressal of investor grievances through SCORES.

Further, our Board has constituted a Stakeholders’ Relationship Committee, which is responsible for redressal of grievances of the security holders of our Company. For details, see “Our Management – Board Committees” on page 366.

Our Company has not received any investor complaint during the three years preceding the date of this Prospectus.

Further, no investor complaint in relation to our Company is pending as on the date of this Prospectus.

Other confirmations Any person connected with the Offer shall not offer any incentive, whether direct or indirect, in any manner, whether in cash or kind or services or otherwise, to any person for making a Bid in the Offer, except for fees or commission for services rendered in relation to the Offer.

Exemption from complying with any provisions of securities laws, if any, granted by SEBI As on the date of this Prospectus, our Company has not sought any exemption from complying with any provisions of securities laws.

608SECTION VII – OFFER RELATED INFORMATION TERMS OF THE OFFER The Equity Shares being offered and Allotted pursuant to this Offer will be subject to the provisions of the Companies Act 2013, the SEBI ICDR Regulations, the SCRA, the SCRR, the Memorandum of Association, the Articles of Association, the SEBI Listing Regulations, the terms of the Red Herring Prospectus and this Prospectus, the Bid cum Application Form, the Revision Form, the CAN, the Abridged Prospectus and other terms and conditions as may be incorporated in the Allotment Advice and other documents and certificates that were and may be executed in respect of this Offer. The Equity Shares will also be subject to all applicable laws, guidelines, rules, notifications and regulations relating to the issue, offer for sale, transfer of securities and listing and trading of securities, issued from time to time, by the SEBI, the GoI, the Stock Exchanges, the RoC, the RBI and/or other authorities, as in force on the date of this Offer and to the extent applicable or such other conditions as maybe prescribed by such governmental and/or regulatory authority while granting approval for the Offer.

Ranking of Equity Shares The Equity Shares offered, and Allotted pursuant to the Offer are subject to the applicable laws including provisions of the Companies Act 2013, the SEBI ICDR Regulations, the SCRA, SCRR, the Memorandum of Association and the Articles of Association and will rank pari passu in all respects with the existing Equity Shares, including rights in respect of dividends, voting and other corporate benefits, if any, declared by our Company after the date of Allotment in accordance with applicable law. See “Main Provisions of the Articles of Association” on page 646.

Mode of payment of dividend Our Company shall pay dividend, if declared, to the Shareholders, as per the provisions of the Companies Act 2013, the SEBI Listing Regulations, the Memorandum of Association and the Articles of Association, the dividend distribution policy of the Company, any guidelines or directives that may be issued by the GoI in this respect and other applicable law. Any dividends declared after the date of Allotment in this Offer will be payable to the Allottees, for the entire year, in accordance with applicable law. For further details in relation to dividends, see “Dividend Policy” and “Main Provisions of the Articles of Association” on pages 382 and 646, respectively.

Face Value, Offer Price, Floor Price and Price Band The face value of each Equity Share is ₹ 10. At any given point of time there will be only one denomination for the Equity Shares. The Floor Price is ₹118.00 per Equity Share. The Offer Price is ₹ 124.00 per Equity Share. The Anchor Investor Offer Price is ₹ 124.00 per Equity Share.

The Offer Price, Price Band and the minimum Bid Lot was decided by our Company in consultation with the BRLMs, and shall be published at least two Working Days prior to the Bid/Offer Opening Date, all editions of English national daily newspaper, Financial Express, all editions of Hindi national daily newspaper, Jansatta and Bengaluru edition of a Kannada daily newspaper, Vishwavani, Kannada being the regional language of Karnataka, where our Registered Office is located, and was made available to the Stock Exchanges for the purpose of uploading on their websites. The Price Band, along with the relevant financial ratios calculated at the Floor Price and at the Cap Price was pre-filled in the Bid cum Application Forms available at the website of the Stock Exchanges. The Offer Price was determined by our Company in consultation with the BRLMs, in compliance with the SEBI ICDR Regulations after the Bid/Offer Closing Date, on the basis of assessment of market demand for the Equity Shares issued by way of the Book Building Process.

Rights of the Shareholders Subject to applicable laws, rules, regulations and guidelines and the Articles of Association, the Shareholders will

have the following rights: • right to receive dividends, if declared; • right to attend general meetings and exercise voting powers, unless prohibited by law; • right to vote on a poll either in person or by proxy and e-voting in accordance with the provisions of the Companies Act 2013;

609• right to receive offers for rights shares and be allotted bonus shares, if announced; • right to receive any surplus on liquidation subject to any statutory and preferential claims being satisfied;

• right of free transferability of their Equity Shares, subject to applicable foreign exchange regulations and other applicable law; and • such other rights as may be available to a shareholder of a listed public company under the Companies Act 2013, the terms of the SEBI Listing Regulations and our Memorandum of Association and Articles of Association.

For a detailed description of the main provisions of our Articles of Association relating to voting rights, dividend, forfeiture, lien, transfer, transmission, consolidation and splitting, see “Main Provisions of the Articles of Association” on page 646.

Allotment only in dematerialized form In terms of Section 29 of the Companies Act 2013, and the SEBI ICDR Regulations, the Equity Shares shall be Allotted only in dematerialized form. As per the SEBI ICDR Regulations and the SEBI Listing Regulations, the trading of the Equity Shares shall only be in dematerialised form on the Stock Exchanges.

In this context, two agreements have been entered into and amongst our Company, the respective Depositories

and the Registrar to the Offer:

1. Tripartite agreement dated October 8, 2012, among our Company, NSDL and Registrar to the Offer.

2. Tripartite agreement dated March 12, 2025, among our Company, CDSL and the Registrar to the Offer.

For details in relation to the Basis of Allotment, see “Offer Procedure” on page 623.

Compliance with disclosure and accounting norms Our Company shall comply with all disclosure and accounting norms as specified by SEBI from time to time.

Market Lot and Trading Lot Since trading of our Equity Shares on the Stock Exchanges is in dematerialized form, the tradable lot is one Equity Share. Allotment in the Offer was made only in electronic form in multiples of 120 Equity Shares, subject to a minimum Allotment of 120 Equity Shares. For the method of Basis of Allotment, see “Offer Procedure” on page

623.

Jurisdiction Exclusive jurisdiction for the purpose of the Offer is with the competent courts/authorities in Mumbai, Maharashtra, India.

The Equity Shares offered in the Offer have not been and will not be registered under the U.S. Securities Act or any other applicable law of the United States and, unless so registered, may not be offered or sold within the United States, except pursuant to an exemption from, or in a transaction not subject to, the registration requirements of the U.S. Securities Act and applicable state securities laws. Accordingly, the Equity Shares are being offered and sold (i) within the United States only to persons reasonably believed to be “qualified institutional buyers” (as defined in Rule 144A under the U.S. Securities Act, and referred to in this Prospectus as “U.S. QIBs”, for the avoidance of doubt, the term U.S. QIBs does not refer to a category of institutional investor defined under applicable Indian regulations and referred to in this Prospectus as “QIBs”) in transactions exempt from, the registration requirements of the U.S. Securities Act, and (ii) outside the United States in offshore transactions as defined in and in compliance with Regulation S under the U.S. Securities Act and the applicable laws of the jurisdiction where those offers and sales occur.

The Equity Shares have not been and will not be registered, listed or otherwise qualified in any other jurisdiction outside India and may not be offered or sold, and Bids may not be made by persons in any such jurisdiction, except in compliance with the applicable laws of such jurisdiction.

610Joint holders Subject to the provisions of the Articles of Association, where two or more persons are registered as the holders of any Equity Shares, they were deemed to hold such Equity Shares as joint holders with benefits of survivorship.

Nomination facility In accordance with Section 72 of the Companies Act 2013, read with Companies (Share Capital and Debentures) Rules, 2014, as amended, the sole or first Bidder, with other joint Bidders, may nominate any one person in whom, in the event of the death of sole Bidder or in case of joint Bidders, death of all the Bidders, as the case may be, the Equity Shares Allotted, if any, will vest, to the exclusion of all other persons, unless the nomination is verified or cancelled in the prescribed manner. A nominee entitled to the Equity Shares by reason of the death of the original holder(s), will, in accordance with Section 72 of the Companies Act 2013, be entitled to the same benefits to which he or she will be entitled if he or she were the registered holder of the Equity Shares. Where the nominee is a minor, the holder(s) may make a nomination to appoint, in the prescribed manner, any person to become entitled to Equity Share(s) in the event of the holder’s death during minority. A nomination shall stand rescinded upon a sale/transfer/alienation of Equity Share(s) by the person nominating. A nomination may be cancelled, or varied by nominating any other person in place of the present nominee, by the holder of the Equity Shares who has made the nomination, by giving a notice of such cancellation or variation to our Company in the prescribed form. A buyer will be entitled to make a fresh nomination in the manner prescribed. A fresh nomination can be made only on the prescribed form available on request at the Registered Office or at the Registrar and Share Transfer Agents of our Company.

Further, any person who becomes a nominee by virtue of Section 72 of the Companies Act 2013, will, on the production of such evidence as may be required by our Board, elect either: • to register himself or herself as holder of Equity Shares; or • to make such transfer of the Equity Shares, as the deceased holder could have made.

Further, our Board may at any time give notice requiring any nominee to choose either to be registered himself or herself or to transfer the Equity Shares, and if the notice is not complied with within a period of 90 days, the Board may thereafter withhold payment of all dividends, interests, bonuses or other monies payable in respect of the Equity Shares, until the requirements of the notice have been complied with.

Since the Allotment of Equity Shares in the Offer will be made only in dematerialized form, there is no need to make a separate nomination with our Company. Nominations registered with the respective Depository Participant of the Bidder will prevail. If Bidders want to change their nomination, they are advised to inform their respective Depository Participant.

Bid/Offer Period BID/OFFER OPENED ON Wednesday, December 3, 2025 BID/OFFER CLOSED ON Friday, December 5, 2025

An indicative timetable in respect of the Offer is set out below:

FINALIZATION OF BASIS OF ALLOTMENT WITH On or about Monday, December 8, 2025 THE DESIGNATED STOCK EXCHANGE INITIATION OF REFUNDS (IF ANY, FOR ANCHOR On or about Tuesday, December 9, 2025 INVESTORS)/UNBLOCKING OF FUNDS FROM ASBA ACCOUNT CREDIT OF EQUITY SHARES TO DEPOSITORY On or about Tuesday, December 9, 2025 ACCOUNTS OF ALLOTTEES COMMENCEMENT OF TRADING OF THE EQUITY On or about Wednesday, December 10, 2025 SHARES ON THE STOCK EXCHANGES In case of any delay in unblocking of amounts in the ASBA Accounts (including amounts blocked through the UPI Mechanism) exceeding two Working Days from the Bid/Offer Closing Date for cancelled / withdrawn / deleted ASBA Forms, the Bidder shall be compensated at a uniform rate of ₹ 100 per day or 15% per annum of the Bid Amount, whichever is higher from the date on which the request for cancellation/withdrawal/deletion is placed in the Stock Exchanges bidding platform until the date on which the amounts are unblocked; (ii) any blocking of multiple amounts for the same ASBA Form (for amounts blocked through the UPI Mechanism), and the Bidder shall be compensated at a uniform rate ₹ 100 per day or 15% per annum of the 611total cumulative blocked amount except the original application amount, whichever is higher from the date on which such multiple amounts were blocked till the date of actual unblock; (iii) any blocking of amounts more than the Bid Amount, the different amount (i.e., the blocked amount less the Bid Amount) shall be instantly revoked and the Bidder shall be compensated at a uniform rate of ₹ 100 per day or 15% per annum of the difference in amount, whichever is higher from the date on which such excess amounts were blocked till the date of actual unblock; (iv) any delay in unblocking of non-allotted/ partially allotted Bids, exceeding three Working Days from the Bid/Offer Closing Date, the Bidder shall be compensated at a uniform rate of ₹ 100 per day or 15% per annum of the Bid Amount, whichever is higher for the entire duration of delay exceeding three Working Days from the Bid/Offer Closing Date by the intermediary responsible for causing such delay in unblocking. The post-Offer BRLMs shall, in their sole discretion, identify and fix the liability on such intermediary or entity responsible for such delay in unblocking. The Bidder shall be compensated in the manner specified in the SEBI ICDR Master Circular in case of delays in resolving investor grievances in relation to blocking/unblocking of funds.

The processing fees for applications made by the UPI Bidders may be released to the remitter banks (SCSBs) only after such banks provide a written confirmation on compliance with SEBI ICDR Master Circular.

The aforesaid timetable, other than the Bid/Offer Opening Date and the Bid/Offer Closing Date, is indicative in nature and does not constitute any obligation or liability on our Company or the Selling Shareholders or the members of the Syndicate. While our Company and Selling Shareholders will use best efforts to ensure that listing and trading of our Equity Shares on the Stock Exchanges commences such period as may be prescribed by SEBI, the timetable may be subject to change for various reasons, including, any delays in receipt of final listing and trading approvals from the Stock Exchanges, delay in receipt of final certificates from SCSBs, etc. Our Company shall within two days from the closure of the Offer, refund the subscription amount received in case of non-receipt of minimum subscription or in case our Company fails to obtain listing or trading permission from the Stock Exchanges for the Equity Shares. The commencement of trading of the Equity Shares will be entirely at the discretion of the Stock Exchanges in accordance with applicable law. Each of the Selling Shareholders, severally and not jointly, confirm that they shall extend reasonable support and co-operation required by our Company and the BRLMs, solely to the extent of its Offered Shares, to facilitate the completion of the necessary formalities for listing and commencement of trading of the Equity Shares at the Stock Exchanges within such time period as may be prescribed by SEBI.

In terms of the UPI Circulars, in relation to the Offer, the BRLMs will be required to submit reports of compliance with timelines and activities prescribed by SEBI in connection with the allotment and listing procedure within three Working days of Bid/Offer Closing Date or such time prescribed by SEBI, identifying non-adherence to timelines and processes and an analysis of entities responsible for the delay and the reasons associated with it.

Further, the Offer procedure is subject to change basis any revised SEBI circulars to this effect.

Submission of Bids (other than Bids from Anchor Investors):

Bid/Offer Period (except the Bid/Offer Closing Date) Submission and revision in Bids Only between 10.00 a.m. and 5.00 p.m. (Indian Standard Time (“IST”) Bid/Offer Closing Date Submission of electronic applications (Online Only between 10.00 a.m. and up to 5.00 p.m. IST ASBA through 3-in-1 accounts) – For RIIs, other than QIBs and Non-Institutional Investors and Eligible Employees Bidding in the Employee Reservation Portion Submission of electronic applications (Bank Only between 10.00 a.m. and up to 4.00 p.m. IST ASBA through online channels like internet banking, mobile banking and Syndicate UPI ASBA applications where Bid Amount is up to ₹

0.50 million) Submission of electronic applications (Syndicate Only between 10.00 a.m. and up to 3.00 p.m. IST Non-Retail, Non-Individual applications) Submission of physical applications (Bank ASBA) Only between 10.00 a.m. and up to 1.00 p.m. IST Submission of physical applications (Syndicate Only between 10.00 a.m. and up to 12.00 p.m. IST and Non-Retail, Non-Individual applications of QIBs Syndicate members shall transfer such applications to banks and Non-Institutional Investors where Bid Amount before 1 p.m. IST is more than ₹ 0.50 million) Modification/ Revision/cancellation of Bids 612Modification/Upward revision of Bids by QIBs Only between 10.00 a.m. on the Bid/Offer Opening Date and Non-Institutional Investors categories# and up to 4.00 p.m. IST on Bid/Offer Closing Date Modification/Upward or downward revision of Only between 10.00 a.m. on the Bid/Offer Opening Date Bids or cancellation of Bids by RIIs and Eligible and up to 5.00 p.m. IST on Bid/Offer Closing Date Employees Bidding in the Employee Reservation Portion #QIBs and Non-Institutional Investors can neither revise their bids downwards nor cancel/ withdraw their Bids.

On the Bid/Offer Closing Date, the Bids were uploaded until:

(i) 4:00 p.m. IST in case of Bids by QIBs and Non-Institutional Investors, and

(ii) until 5:00 p.m. IST or such extended time as permitted by the Stock Exchanges, in case of Bids by RIIs and Eligible Employees Bidding in the Employee Reservation Portion.

It is clarified that Bids not uploaded on the electronic bidding system or in respect of which the full Bid Amount is not blocked by SCSBs or not blocked under the UPI Mechanism in the relevant ASBA Account, as the case may be, were rejected.

The Registrar to the Offer was required to submit the details of cancelled/withdrawn/deleted applications to the SCSBs on daily basis within 60 minutes of the Bid closure time from the Bid/Offer Opening Date till the Bid/Offer Closing Date by obtaining the same from the Stock Exchanges. The SCSBs was required to unblock such applications by the closing hours of the Working Day and submit the confirmation to the Book Running Lead Managers and the Registrar to the Offer not later than the next working day from the finalization of basis of allotment by the Registrar to the Offer, as per the format prescribed in SEBI ICDR Master Circular.

To avoid duplication, the facility of re-initiation provided to Syndicate Members shall preferably be allowed only once per bid/batch and as deemed fit by the Stock Exchanges, after closure of the time for uploading Bids.

Due to limitation of time available for uploading Bids on the Bid/Offer Closing Date, Bidders were advised to submit Bids one day prior to the Bid/Offer Closing Date and in any case no later than 3.00 p.m. IST on the Bid/Offer Closing Date for electronic applications and 12.00 p.m. IST on the Bid/Offer Closing Date for physical applications. Any time mentioned in this Prospectus is IST. Bidders were cautioned that, in the event a large number of Bids were received on the Bid/Offer Closing Date, some Bids could not get uploaded due to lack of sufficient time. Such Bids that could not be uploaded were not be considered for allocation under this Offer. Bids and any revision to the Bids, were accepted on the Stock Exchange platform only during Working Days, during the Bid/Offer Period and revisions shall not be accepted on Saturdays and public holidays. The Designated Intermediaries modified select fields uploaded in the Stock Exchange Platform during the Bid/Offer Period till

5.00 pm on the Bid/Offer Closing Date after which the Stock Exchange(s) sent the bid information to the Registrar to the Offer for further processing. Further, as per letter no. list/SMD/SM/2006 dated July 3, 2006 and letter no.

NSE/IPO/25101- 6 dated July 6, 2006 issued by BSE and NSE, respectively, Bids and any revision in Bids shall not be accepted on Saturdays, Sundays and public/bank holidays as declared by the Stock Exchanges. Bids by ASBA Bidders were uploaded by the relevant Designated Intermediary in the electronic system to be provided by the Stock Exchanges.

In case of discrepancy in data entered in the electronic book vis-à-vis data contained in the physical Bid cum Application Form for a particular Bidder, the details as per the Bid file received from the Stock Exchanges shall be taken as the final data for the purpose of Allotment.

Minimum subscription If our Company does not receive the minimum subscription in the Offer as specified under Rule 19(2)(b) of the SCRR or the minimum subscription of 90% of the Fresh Issue on the Bid/Offer Closing Date; or subscription level falls below aforesaid minimum subscription after the Bid/Offer Closing Date due to withdrawal of Bids or technical rejections or any other reason; or if the listing or trading permission is not obtained from the Stock Exchanges for the Equity Shares in the Offer, our Company shall forthwith refund the entire subscription amount received. If there is a delay beyond such time period as prescribed under applicable law, as applicable, our Company shall pay interest at the rate of 15% per annum or such other rate as prescribed under applicable law.

613In the event of under-subscription in the Offer, subject to receiving minimum subscription for 90% of the Fresh Issue and compliance with Rule 19(2)(b) of the SCRR, if there remain any valid Bids in the Offer, the Allotment

for the balance valid Bids was made: (a) towards Equity Shares offered by the Selling Shareholders in proportion to their respective portion of the Offered Shares; (b) only after the sale of all of the Offered Shares, towards the balance Fresh Issue.

In terms of the SEBI ICDR Master Circular, our Company shall within two days from the closure of the Offer, refund the subscription amount received in case of non – receipt of minimum subscription or in case our Company fails to obtain listing or trading permission from the Stock Exchanges for the Equity Shares. If there is a delay beyond such time period as prescribed under applicable law, interest at the rate of 15% per annum shall be paid.

Further, in terms of Regulation 49(1) of the SEBI ICDR Regulations, our Company shall ensure that the number of Bidders to whom the Equity Shares were Allotted was not less than 1,000, failing which the entire application money shall be unblocked in the respective ASBA Accounts of the Bidders. In case of any delay in unblocking of amounts in the ASBA Accounts (including amounts blocked through the UPI Mechanism) within such timeline as prescribed under applicable laws, our Company and the Selling Shareholders shall be liable to pay interest on the application money in accordance with applicable laws.

Arrangement for disposal of odd lots Since our Equity Shares will be traded in dematerialised form only and the market lot for our Equity Shares will be one Equity Share, no arrangements for disposal of odd lots are required.

New financial instruments Our Company is not issuing any new financial instruments through this Offer.

Restriction on transfer and transmission of Equity Shares Except for lock-in of the pre-Offer Equity Share capital of our Company, lock-in of the Promoters’ Contribution and the Anchor Investor lock-in will be as provided in “Capital Structure” on page 115 and provided under the AoA detailed in “Main Provisions of Articles of Association” on page 646, there are no restrictions on transfer and transmission of the Equity Shares, and on their consolidation or splitting.

Option to receive Equity Shares in dematerialized form Investors should note that the Equity Shares were Allotted to all successful Bidders only in dematerialised form.

Bidders did not have the option of being Allotted Equity Shares in physical form. However, they may get the Equity Shares rematerialized subsequent to Allotment of the Equity Shares in the Offer, subject to applicable laws.

Withdrawal of the Offer The Offer shall be withdrawn in the event the requirement of the minimum subscription as prescribed under Regulation 45 of the SEBI ICDR Regulations is not fulfilled. Our Company, in consultation with the BRLMs, reserves the right not to proceed with the Offer, in whole or in part thereof, after the Bid/Offer Opening Date but before the Allotment. In such an event, our Company would issue a public notice in the newspapers in which the pre-Offer and price band advertisements were published, within two days of the Bid/Offer Closing Date or such other time as may be prescribed by SEBI, providing reasons for not proceeding with the Offer and inform the Stock Exchanges promptly on which the Equity Shares are proposed to be listed. The BRLMs, through the Registrar to the Offer, shall notify the SCSBs and the Sponsor Bank(s), in case of UPI Bidders, to unblock the bank accounts of the ASBA Bidders within one Working Day from the date of receipt of such notification and also inform the Bankers to the Offer to process refunds to the Anchor Investors, as the case may be. The notice of withdrawal will be issued in the same newspapers where the pre-Offer and price band advertisements have appeared and the Stock Exchanges will also be informed promptly.

If our Company in consultation with the BRLMs withdraw the Offer after the Bid/Offer Closing Date and thereafter determines that it will proceed with a public offering of the Equity Shares, our Company shall file a fresh draft red herring prospectus with SEBI and the Stock Exchanges. Notwithstanding the foregoing, the Offer is also subject to obtaining (i) the final listing and trading approvals of the Stock Exchanges, which our Company shall apply for after Allotment and within three Working Days of the Bid/Offer Closing Date or such other time period as prescribed under applicable law; and (ii) the final RoC approval of this Prospectus after it is filed and/ or submitted with the RoC and the Stock Exchanges. If Allotment is not made within the prescribed time period 614under applicable law, the entire subscription amount received will be refunded/unblocked within the time prescribed under applicable law.

615OFFER STRUCTURE The Offer of 74,355,351* Equity Shares bearing face value of ₹ 10 each for cash at a price of ₹ 124.00 per Equity Share aggregating to ₹ 9,218.12* million comprising a Fresh Issue of 54,047,958* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00* million by our Company and an Offer for Sale of to 20,307,393* Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 2,518.12* million by the Selling Shareholders. The Offer includes an Employee Reservation Portion of 176,991* Equity Shares bearing face value of ₹ 10 each resulting in Net Offer of 74,178,360* Equity Shares of face value of ₹ 10 each.

*Subject to finalisation of Basis of Allotment The Employee Reservation Portion shall not exceed 5% of our post-Offer paid-up Equity Share capital. The Offer less the Employee Reservation Portion is the Net Offer.

Our Company, in consultation with the BRLMs, undertook a Pre-IPO Placement, as permitted under applicable law, aggregating to ₹ 1,440.00 million. The Pre-IPO Placement, was made to SBI Emergent India Fund, DSP India Fund - India Long / Short Strategy Fund with Cash Management Option, SBI Optimal Equity Fund – Long Term, and Think India Opportunities Master Fund LP at a price of ₹ 123.97 per Equity Share bearing face value of ₹ 10 each, decided by our Company, in consultation with the BRLMs. While the amount raised pursuant to the Pre-IPO Placement was reduced from the Fresh Issue, as disclosed in the UDRHP – I, our Company had increased the size of the Fresh Issue such that the revised size of the Fresh Issue was 54,047,958 Equity Shares bearing face value of ₹ 10 each aggregating to ₹ 6,700.00 million. The Pre-IPO Placement did not exceed 20% of the size of the Fresh Issue, as disclosed in the UDRHP - I. Our Company had appropriately intimated the subscribers to the Pre-IPO Placement, prior to allotment pursuant to the Pre-IPO Placement, that there was no guarantee that our Company would proceed with the Offer or the Offer would be successful and result into listing of the Equity Shares on the Stock Exchanges. Further, relevant disclosures in relation to such intimation to the subscribers to the Pre-IPO Placement have been appropriately made in the relevant sections of the Red Herring Prospectus and this Prospectus.

The Offer and Net Offer constituted 11.09% and 11.06%, respectively of the post-Offer paid-up Equity Share capital of our Company.

The Offer is being made through the Book Building Process, in compliance with Regulation 6(2) and Regulation 31 of the SEBI ICDR Regulations.

Particulars QIBs(1) Non- Retail Individual Eligible Institutional Investors Employees# Investors Number of Equity Not less than Not more than Not more than Not more than Shares available for 55,633,772** 11,126,753** 7,417,835** Equity 176,991** Equity Allotment/allocation^( Equity Shares Equity Shares Shares bearing face value Shares

2) bearing face bearing face of ₹ 10 each or Net Offer bearing face value of ₹ 10 value of ₹ 10 less allocation to QIBs value of ₹ 10 each each or Net Offer and Non-Institutional each less allocation to Investors QIBs and Retail Individual Investors Percentage of Offer Not less than Not more than Not more than 10% of the 0.03% of the Size available for 75% of the Net 15% of the Net Net Offer or the Net post- Offer paid- Allotment or Offer size shall Offer or the Net Offer less allocation to up equity share allocation be available for Offer less QIBs and Non- capital of our allocation to allocation to Institutional Investors Company QIBs. However, QIBs and Retail was made available for up to 5% of the Individual allocation Net QIB Portion Investors was was made made available available for for allocation. (a) allocation One-third of the proportionately Non-Institutional to Mutual Funds Portion was 616Particulars QIBs(1) Non- Retail Individual Eligible Institutional Investors Employees# Investors only. Mutual made available Funds for allocation to participating in Bidders with an the Mutual Fund application size Portion will also of more than ₹ be eligible for 0.20 million and allocation in the up to ₹ 1.00 remaining million and (b) balance Net QIB two-thirds of the Portion Non-Institutional (excluding the Portion was Anchor Investor made available Portion). The for allocation to unsubscribed Bidders with an portion in the application size Mutual Fund of more than ₹ Portion was 1.00 million and made available under- for allocation to subscription in the Net QIB either of these Portion two subcategories of the Non- Institutional Portion may be allocated to Bidders in the other subcategory of the Non- Institutional Portion in accordance with the SEBI ICDR Regulations, subject to valid Bids being received at or above the Offer Price Basis of Allotment if Proportionate as The allotment to The allotment to each Proportionate;

respective category is follows each NII shall not Retail Individual Bidder unless the oversubscribed* (excluding the be less than the shall not be less than the Employee Anchor Investor minimum minimum Bid lot subject Reservation Portion): application size, to availability of Equity Portion is

(a) 1,112,676** subject to Shares in the Retail undersubscribed Equity availability of Portion and the , the value of Shares Equity Shares in remaining available allocation to an bearing face the Non- Equity Shares shall be Eligible value of ₹ 10 Institutional allocated on a Employee shall each shall be Portion and the proportionate basis. See not exceed ₹ available for remaining “Offer Procedure” on 0.20 million (net allocation on available Equity page 623 of Employee a Shares if any, Discount). In the proportionate shall be Allotted event of basis to on a undersubscriptio Mutual proportionate n in the 617Particulars QIBs(1) Non- Retail Individual Eligible Institutional Investors Employees# Investors Funds only; basis, subject to: Employee and (a) One-third of Reservation

(b) 22,253,510** the Non- Portion, the Equity Institutional unsubscribed Shares Portion was portion may be bearing face made allocated, on a value of ₹ 10 available for proportionate each shall be allocation to basis, to Eligible available for Bidders with Employees allocation on an Bidding in the a application Employee proportionate size of more Reservation basis to all than ₹ 0.20 Portion for value QIBs, million and exceeding ₹ 0.20 including up to ₹ 1.00 million (net of Mutual million; and Employee Funds (b) Two-thirds Discount), receiving of the Non- subject to total allocation as Institutional Allotment to an per (a) above. Portion was Eligible

(c) 60% of the made Employee not QIB Portion available for exceeding ₹ 0.50 (i.e., allocation to million (net of 33,380,262** Bidders with Employee Equity an Discount) each Shares application bearing face size of more value of ₹ 10 than ₹ 1.00 each) may be million allocated on provided a that the discretionary unsubscribe basis to d portion in Anchor either of the Investors of aforementio which one- ned sub- third shall be categories available for may be allocation to allocated to Mutual applicants in Funds only, the other subject to sub- valid Bids category of being Non- received Institutional from Mutual Investors Funds at or above the Anchor Investor Allocation Price.

Mode of Bidding Through ASBA Through ASBA Through ASBA process Through ASBA process only process only only (including the UPI process only (excluding the (including the Mechanism) (including the UPI Mechanism) UPI Mechanism UPI for an application Mechanism) 618Particulars QIBs(1) Non- Retail Individual Eligible Institutional Investors Employees# Investors except for size of up to ₹ Anchor Investors 0.50 million) Minimum Bid Such number of Such number of 120 Equity Shares 120 Equity Equity Shares in Equity Shares in bearing face value of ₹ 10 Shares bearing multiples of 120 multiples of 120 each face value of ₹ Equity Shares Equity Shares 10 each bearing face bearing face value of ₹ 10 value of ₹ 10 each so that the each so that the Bid Amount Bid Amount exceeds ₹ 0.20 exceeds ₹ 0.20 million million For Non- Institutional Bidders applying under (ii) Two- thirds of the Non- Institutional Category such number of Equity Shares in multiples of 120 Equity Shares such that the Bid Amount exceeds ₹1.00 million Maximum Bid Such number of Such number of Such number of Equity Such number of Equity Shares in Equity Shares in Shares in multiples of Equity Shares in multiples of 120 multiples of 120 120 Equity Shares multiples of 120 Equity Shares Equity Shares bearing face value of ₹ 10 Equity Shares bearing face bearing face each so that the Bid bearing face value of ₹ 10 value of ₹ 10 Amount does not exceed value of ₹ 10 each so that the each so that the ₹ 0.20 million each, so as to Bid does not Bid does not ensure that the exceed the Net exceed the Net Bid Amount by Offer size Offer size each Eligible (excluding (excluding the Employee does Anchor Investor QIB Portion), not exceed ₹ portion), subject subject to 0.50 million less to applicable applicable limits Employee limits to each to each Bidder Discount Bidder Mode of Allotment Compulsorily in dematerialised form Bid Lot 120 Equity Shares bearing face value of ₹ 10 each and in multiples of 120 Equity Shares thereafter Allotment Lot 120 Equity Shares bearing face value of ₹ 10 each and in multiples of one Equity Share thereafter for QIBs, Eligible Employees and Retail Individual Investors. For Non- Institutional Investors allotment shall not be less than the minimum Non-Institutional application size.

Trading Lot One Equity Share Who can Public financial Resident Indian Resident Indian Eligible Apply(2)(3)(4)(5) institutions individuals, individuals, HUFs (in the Employees specified in HUFs (in the name of the Karta) and

Section 2(72) of name of Karta), Eligible NRIs the Companies companies, Act 2013, FPIs corporate bodies, registered with Eligible NRIs, 619Particulars QIBs(1) Non- Retail Individual Eligible Institutional Investors Employees# Investors SEBI (other than scientific individuals, institutions, corporate bodies societies and and family trusts and FPIs offices), who are scheduled individuals, commercial corporate bodies banks, mutual and family funds registered offices which are with SEBI, re-categorised as venture capital category II FPI funds registered (as defined in the with the SEBI, SEBI FPI FVCIs, Regulations) and Alternative registered with Investment SEBI Funds, multilateral and bilateral development financial institutions, state industrial development corporations, NBFC-SI, accredited investors as defined in regulation 2(1)(ab) of the SEBI AIF Regulations, for the limited purpose of their investments in angel funds registered with the Board, under the SEBI AIF Regulations, insurance companies registered with the Insurance Regulatory and Development Authority, provident funds with a minimum corpus of ₹ 250 million, pension funds with a minimum corpus of ₹ 250 million registered with the Pension Fund 620Particulars QIBs(1) Non- Retail Individual Eligible Institutional Investors Employees# Investors Regulatory and Development Authority established under

section 3 (1) of the Pension Fund Regulatory and Development Authority Act, 2013, the National Investment Fund set up by resolution F. No.

2/3/2005-DD-II dated November 23, 2005 of the GoI, published in the Gazette of India, insurance funds set up and managed by the army, navy, or air force of the Union of India and insurance funds set up and managed by the Department of Posts, India and Systemically Important Non- Banking Financial Companies.

Terms of Payment In case of Anchor Investors: Full Bid Amount was payable by the Anchor Investors at the time of submission of their Bids(4)

In case of all other Bidders: Full Bid Amount was blocked by the SCSBs in the bank account of the Bidders, or by the Sponsor Bank(s) through the UPI Mechanism (other than Anchor Investors) that is specified in the Bid cum Application Form at the time of the submission of the Bid cum Application Form ^Assuming full subscription in the Offer.

* SEBI ICDR Master Circular has mandated that ASBA applications in public issues were processed only after the application monies were blocked in the bank accounts of the investors. Accordingly, Stock Exchanges did for all categories of investors viz. QIBs, NIIs and RIIs and also for all modes through which the applications are processed, accept the ASBA applications in their electronic book building platform only with a mandatory confirmation on the application monies blocked.

**Subject to finalisation of Basis of Allotment. # Eligible Employees Bidding in the Employee Reservation Portion could Bid up to a Bid Amount of ₹ 0.50 million (net of Employee Discount).

However, a Bid by an Eligible Employee in the Employee Reservation Portion was considered for allocation, in the first instance, for a Bid Amount of up to ₹ 0.20 million (net of Employee Discount). In the event of under-subscription in the Employee Reservation Portion, the unsubscribed portion was made available for allocation and Allotment, proportionately to all Eligible Employees who had Bid in excess of ₹

0.20 million (net of Employee Discount), subject to the maximum value of Allotment made to such Eligible Employee not exceeding ₹ 0.50 million (net of Employee Discount). An Eligible Employee Bidding in the Employee Reservation Portion could also Bid in the Net Offer, and such Bids were not considered multiple Bids. The unsubscribed portion, if any, in the Employee Reservation Portion was added to the Net Offer. In case of under-subscription in the Net Offer, spill-over to the extent of such under-subscription were permitted from the Employee Reservation Portion. For further details, please see “Terms of the Offer” on page 609.

(1) Our Company, in consultation with the BRLMs, allocated 60% of the QIB Portion to Anchor Investors at the Anchor Investor Allocation Price, on a discretionary basis, subject to there being (i) a maximum of two Anchor Investors, where allocation in the Anchor Investor Portion is up to ₹ 100.00 million, (ii) minimum of two and maximum of 15 Anchor Investors, where the allocation under the Anchor Investor Portion is more than ₹ 100.00 million but up to ₹ 2,500 million under the Anchor Investor Portion, subject to a minimum 621Allotment of ₹ 50.00 million per Anchor Investor, and (iii) in case of allocation above ₹ 2,500.00 million under the Anchor Investor Portion, a minimum of five such investors and a maximum of 15 Anchor Investors for allocation up to ₹ 2,500.00 million, and an additional 10 Anchor Investors for every additional ₹ 2,500.00 million or part thereof were permitted, subject to minimum allotment of ₹ 50.00 million per Anchor Investor. An Anchor Investor will make a minimum Bid of such number of Equity Shares, that the Bid Amount is at least ₹ 100.00 million. One-third of the Anchor Investor Portion was reserved for Mutual Funds, subject to valid Bids being received at or above the Anchor Investor Allocation Price.

(2) This Offer was made in accordance with Rule 19(2)(b) of the SCRR, through the Book Building Process, in compliance with Regulation 6(2) of the SEBI ICDR Regulations, wherein not less than 75% of the Net Offer was available for allocation to QIBs on a proportionate basis, provided that the Anchor Investor Portion may be allocated on a discretionary basis. Further, not more than 15% of the Net Offer was available for allocation to Non-Institutional Investors, of which one-third of the Non-Institutional Portion was made available for allocation to Bidders with an application size of more than ₹ 0.20 million and up to ₹ 1.00 million and two-thirds of the Non-Institutional Portion was made available for allocation to Bidders with an application size of more than ₹ 1.00 million and under-subscription in either of these two sub-categories of Non-Institutional Portion was allocated to Bidders in the other sub-category of Non-Institutional Portion in accordance with SEBI ICDR Regulations, subject to valid Bids being received at or above the Offer Price. The allocation to each Non-Institutional Investor was not less than the minimum application size, subject to availability of Equity Shares in the Non- Institutional Portion and the remaining available Equity Shares, if any, was allocated on a proportionate basis in accordance with the conditions specified in this regard in Schedule XIII of the SEBI ICDR Regulations. Further, not more than 10% of the Net Offer was made available for allocation to Retail Individual Investors in accordance with SEBI ICDR Regulations, subject to valid Bids having been received at or above the Offer Price. Under-subscription, if any, in any category, except the QIB Portion, was met with spill-over from any other category or categories, as applicable, at the discretion of our Company in consultation with the BRLMs and the Designated Stock Exchange, subject to valid Bids having been received at or above the Offer Price and in accordance with applicable laws. Under- subscription, if any, in the Net QIB Portion was not allowed to be met with spill-over from other categories or a combination of categories.

(3) If the Bid was submitted in joint names, the Bid cum Application Form contained only the name of the First Bidder whose name also appeared as the first holder of the depository account held in joint names. The signature of only the First Bidder was required in the Bid cum Application Form and such First Bidder was deemed to have signed on behalf of the joint holders. Our Company reserved the right to reject, in its absolute discretion, all of any multiple Bids, except as otherwise permitted, in any or all categories.

(4) Full Bid Amount was paid by the Anchor Investors at the time of submission of the Bid cum Application Form, provided that any difference between the price at which Equity Shares are allocated to the Anchor Investors and the Anchor Investor Offer Price, was paid by the Anchor Investor Pay-in Date as mentioned in the CAN.

(5) Bidders were required to confirm and were deemed to have represented to our Company, the Selling Shareholders, the members of the Syndicate, the Underwriters, their respective directors, officers, agents, affiliates and representatives that they are eligible under applicable law, rules, regulations, guidelines and approvals to acquire/ subscribe to our Equity Shares.

The Bids by FPIs with certain structures as described under “Offer Procedure – Bids by Foreign Portfolio Investors” on page 629 and having same PAN were collated and identified as a single Bid in the Bidding process.

The Equity Shares Allocated and Allotted to such successful Bidders (with same PAN) were proportionately distributed.

Subject to valid Bids having been received at or above the Offer Price, under-subscription, if any, in the Non- Institutional Portion or the Retail Portion was allowed to be met with spill over from any other category or a combination of categories at the discretion of our Company, in consultation with the BRLMs and the Designated Stock Exchange, subject to applicable laws. However, under-subscription, if any, in the QIB Portion was not allowed to be met with spill-over from other categories or a combination of categories. For further details, see “Terms of the Offer” on page 609.

Eligible Employees Bidding in the Employee Reservation Portion at a price within the Price Band could make payment based on Bid Amount, at the time of making a Bid. Eligible Employees Bidding in the Employee Reservation Portion at the Cut-Off Price had to ensure payment at the Cap Price, at the time of making a Bid.

Employee Discount, was offered to Eligible Employees Bidding in the Employee Reservation Portion, and, at the time of making a Bid. Eligible Employees Bidding in the Employee Reservation Portion at a price within the Price Band could make payment based on Bid Amount net of Employee Discount at the time of making a Bid. Eligible Employees Bidding in the Employee Reservation Portion at the Cut-Off Price were required to ensure payment at the Cap Price, less Employee Discount at the time of making a Bid.

622OFFER PROCEDURE All Bidders were required to read the General Information Document which highlights the key rules, processes and procedures applicable to public issues in general in accordance with the provisions of the Companies Act 2013, the SCRA, the SCRR and the SEBI ICDR Regulations which is part of the Abridged Prospectus accompanying the Bid cum Application Form. The General Information Document was available on the websites of the Stock Exchanges and the BRLMs. Please refer to the relevant provisions of the General Information Document which are applicable to the Offer.

Additionally, all Bidders could refer to the General Information Document for information in relation to (i) category of investors eligible to participate in the Offer; (ii) maximum and minimum Bid size; (iii) price discovery and allocation; (iv) payment instructions for ASBA Bidders; (v) issuance of Confirmation of Allocation Note (“CAN”) and Allotment in the Offer; (vi) general instructions (limited to instructions for completing the Bid cum Application Form); (vii) designated date; (viii) disposal of applications; (ix) submission of Bid cum Application Form; (x) other instructions (limited to joint bids in cases of individual, multiple bids and instances when an application would be rejected on technical grounds); (xi) applicable provisions of Companies Act 2013 relating to punishment for fictitious applications; (xii) mode of making refunds; (xiii) price discovery and allocation; and

(xiv) interest in case of delay in Allotment or refund.

SEBI through its circular (SEBI/HO/CFD/DIL2/CIR/P/2018/138) dated November 1, 2018, as amended from time to time, including pursuant to circular (SEBI/HO/CFD/DIL2/CIR/P/2019/50) dated April 3, 2019, circular no.

SEBI/HO/CFD/TPD1/CIR/P/2023/140 dated August 9, 2023 and any subsequent circulars or notifications issued by SEBI in this regard, has (“UPI Circular”) introduced an alternate payment mechanism using Unified Payments Interface (“UPI”) and consequent reduction in timelines for listing in a phased manner. UPI has been introduced in a phased manner as a payment mechanism with the ASBA for applications by Retail Individual Investors (“RIIs”) through intermediaries from January 1, 2019. The UPI Mechanism for Retail Individual Investors applying through Designated Intermediaries, in phase I, was effective along with the prior process and timeline of T+6 days (“UPI Phase I”), until June 30, 2019. Subsequently for applications by Retail Individual Investors through Designated Intermediaries, the process of physical movement of forms from Designated Intermediaries to Self-Certified Syndicate Banks (“SCSBs”) for blocking of funds has been discontinued and Retail Individual Investors (“RIIs”) submitting their ASBA Forms through Designated Intermediaries (other than SCSBs) can only use UPI Mechanism with timeline of T+6 days until further notice pursuant to SEBI circular SEBI/HO/CFD/DIL2/CIR/P/2020/50 dated March 30, 2020 (“UPI Phase II”). The final reduced timeline of T+3 days for the UPI Mechanism for applications by UPI Bidders (“UPI Phase III”) and modalities of the implementation of UPI Phase III was notified by SEBI vide its circular no. SEBI/HO/CFD/TPD1/CIR/P/2023/140 dated August 9, 2023 and made effective on a voluntary basis for all issues opening on or after September 1, 2023 and on a mandatory basis for all issues opening on or after December 1, 2023 (“T+3 Notification”). Accordingly, the Offer will be undertaken pursuant to the processes and procedures under UPI Phase III on mandatory basis, subject to any circulars, clarification or notification issued by the SEBI pursuant to the T+3 Notification. The SEBI ICDR Master Circular has consolidated and rescinded the aforementioned circular to the extent they relate to SEBI ICDR Regulations. Further the SEBI ICDR Master Circular has introduced certain additional measures for streamlining the process for initial public offers and redressing investor grievances.

Subsequently, SEBI vide the SEBI RTA Master Circular, consolidated and rescinded the aforementioned circulars to the extent relevant for RTAs. Furthermore, pursuant to SEBI circular no.

SEBI/HO/CFD/DIL2/P/CIR/P/2022/45 dated April 5, 2022, all individual bidders in initial public offerings whose application sizes are up to ₹ 0.50 million shall use the UPI Mechanism. Pursuant to SEBI circular no.

SEBI/HO/CFD/DIL2/P/CIR/2022/75 dated May 30, 2022, and SEBI ICDR Master Circular, applications made using the ASBA facility in initial public offerings shall be processed only after application monies are blocked in the bank accounts of Bidders (all categories). These circulars are effective to the extent not rescinded by the SEBI RTA Master Circular for initial public offers opening on/or after May 1, 2021, and the provisions of these circulars, as amended, are deemed to form part of this Prospectus.

This Prospectus has been filed with SEBI and the Stock Exchanges under Chapter IIA of the SEBI ICDR Regulations and in compliance with the other applicable provisions of the SEBI ICDR Regulations. In terms of Regulation 59C(5) of the SEBI ICDR Regulations, our Company shall, after filing this Prospectus with SEBI and the Stock Exchanges, publish an advertisement, in the form prescribed under the SEBI ICDR Regulations, in all editions of English national daily newspaper, Financial Express, all editions of Hindi national daily newspaper, Jansatta, Bengaluru edition of the Kannada daily newspaper Vishwavani (Kannada being the regional language of Karnataka, where our Registered and Corporate Office is located) each with wide circulation, disclosing the fact of the filing of this Prospectus.

623Bidders are advised to make their independent investigations and ensure that their Bids are submitted in accordance with applicable laws and do not exceed the investment limits or maximum number of Equity Shares that can be held by them under applicable laws or as specified in the Red Herring Prospectus and this Prospectus.

Pursuant to circular no. NSDL/CIR/II/28/2023 dated August 8, 2023 issued by NSDL and circular no.

CDSL/OPS/RTA/POLCY/2023/161 dated August 8, 2023 issued by CDSL, our Company may request the Depositories to suspend/ freeze the ISIN in depository system till listing/ trading effective date. Pursuant to the aforementioned circulars, our Company may request the Depositories to suspend/ freeze the ISIN in depository system from or around the date of this Prospectus till the listing and commencement of trading of our Equity Shares. The shareholders who intend to transfer the pre-Offer shares may request our Company and/ or the Registrar for facilitating transfer of shares under suspended/ frozen ISIN by submitting requisite documents to our Company and/ or the Registrar. Our Company and/ or the Registrar would then send the requisite documents along with applicable stamp duty and corporate action charges to the respective depository to execute the transfer of shares under suspended ISIN through corporate action. The transfer request shall be accepted by the Depositories from our Company till one day prior to Bid/ Offer Opening Date.

Book Building Process The Offer was made in terms of Rule 19(2)(b) of the SCRR, through the Book Building Process in compliance with Regulation 6(2) of the SEBI ICDR Regulations, wherein not less than 75% of the Net Offer was made available for allocation to QIBs on a proportionate basis, provided that our Company, in consultation with the BRLMs, allocated up to 60% of the QIB Portion to Anchor Investors on a discretionary basis in accordance with the SEBI ICDR Regulations, of which one-third was reserved for Mutual Funds, subject to valid Bids having been received from them at or above the Anchor Investor Allocation Price. Further, 5% of the Net QIB Portion was made available for allocation on a proportionate basis to Mutual Funds only, and the remainder of the Net QIB Portion was made available for allocation on a proportionate basis to all QIBs, including Mutual Funds, subject to valid Bids having been received at or above the Offer Price. Further, not more than 15% of the Net Offer was made available for allocation to Non-Institutional Investors of which one-third of the Non-Institutional Portion was made available for allocation to Bidders with an application size of more than ₹ 0.20 million and up to ₹ 1.00 million and two-thirds of the Non-Institutional Portion was made available for allocation to Bidders with an application size of more than ₹ 1.00 million and under-subscription in either of these two sub-categories of Non- Institutional Portion was allocated to Bidders in the other sub-category of Non-Institutional Portion. The allocation to each Non-Institutional Investor was not be less than the minimum application size, subject to availability of Equity Shares in the Non-Institutional Portion and the remaining available Equity Shares, if any, were allocated on a proportionate basis in accordance with the conditions specified in this regard in Schedule XIII of the SEBI ICDR Regulations. Further, not more than 10% of the Net Offer was made available for allocation to Retail Individual Investors in accordance with the SEBI ICDR Regulations, subject to valid Bids having been received at or above the Offer Price. Furthermore, 176,991 Equity Shares of face value of ₹ 10 each, aggregating up to ₹20.00 million were made available for allocation on a proportionate basis only to Eligible Employees Bidding in the Employee Reservation Portion, subject to valid Bids having been received at or above the Offer Price, if any.

The Employee Reservation Portion did not exceed 5% of our post-Offer paid-up equity share capital subject to valid Bids having been received at or above the Offer Price, net of Employee Discount.

Under-subscription, if any, in any category, except the QIB Portion, would be allowed to be met with spill-over from any other category or categories, as applicable, at the discretion of our Company in consultation with the BRLMs and the Designated Stock Exchange, subject to receipt of valid Bids received at or above the Offer Price.

Under-subscription, if any, in the Net QIB Portion, was not allowed to be met with spill-over from any other category or a combination of categories. Further, in the event of an under-subscription in the Employee Reservation Portion, such unsubscribed portion shall be Allotted on a proportionate basis to Eligible Employees Bidding in the Employee Reservation Portion, for a value in excess of ₹ 0.20 million (net of Employee Discount) subject to the total Allotment to an Eligible Employee not exceeding ₹ 0.50 million (net of Employee Discount).

The unsubscribed portion, if any, in the Employee Reservation Portion shall be added to the Net Offer.

In accordance with Rule 19(2)(b) of the SCRR, the Offer constituted 11.09% of the post Offer paid-up Equity Share capital of our Company.

The Equity Shares, on Allotment, shall be traded only in the dematerialized segment of the Stock Exchanges.

Bidders should note that the Equity Shares will be Allotted to all successful Bidders only in dematerialized form. The Bid cum Application Forms which do not have the details of the Bidders’ depository account, including DP ID, Client ID and PAN, and UPI ID (for UPI Bidders), were treated as incomplete and were 624rejected. Bidders will not have the option of being Allotted Equity Shares in physical form. However, they may get the Equity Shares rematerialized subsequent to Allotment of the Equity Shares in the Offer, subject to applicable laws.

Bid cum Application Form Copies of the Bid cum Application Form (other than for Anchor Investors) and the Abridged Prospectus were available with the Designated Intermediaries at relevant Bidding Centres and at our Registered Office. The Bid cum Application Forms was also available for download on the websites of NSE (www.nseindia.com) and the BSE (www.bseindia.com) at least one day prior to the Bid/Offer Opening Date.

For Anchor Investors, the Bid cum Application Forms were made available at the offices of the BRLMs.

All Bidders (other than Anchor Investors) were required to compulsorily use the ASBA process to participate in the Offer. UPI Bidders were required to Bid in the Offer through UPI Mechanism for submitting their bids to Designated Intermediaries and were allowed to use ASBA Process by way of ASBA Forms to submit their bids directly to SCSBs. Anchor Investors were not permitted to participate in this Offer through the ASBA process.

Bidders (other than Anchor Investors and UPI Bidders) were required to provide bank account details and authorisation by the ASBA account holder to block funds in their respective ASBA Accounts in the relevant space

provided in the ASBA Form and the ASBA Form that did not contain such detail were liable to be rejected.

UPI Bidders submitting their ASBA Form to any Designated Intermediary (other than SCSBs) were required to bid using the UPI Mechanism and were required to provide the UPI ID in the relevant space provided in the ASBA Form. ASBA Forms for such UPI Bidders, that did not contain the UPI ID were liable to be rejected. UPI Bidders could also apply through the SCSBs and mobile applications using the UPI handles as provided on the website of SEBI.

ASBA Bidders were required to provide either (i) the bank account details and authorisation to block funds in their respective ASBA Accounts, or (ii) the UPI ID, as applicable in the relevant space provided in the ASBA Form. The ASBA Forms that did not contain such details were liable to be rejected. Further, ASBA Bidders were required to ensure that the Bids were submitted at the Bidding Centres only on ASBA Forms bearing the stamp of a Designated Intermediary (except in case of electronic ASBA Forms) and ASBA Forms not bearing such specified stamp were liable for rejection. UPI Bidders, were required to submit their ASBA Forms with the Syndicate, Sub-Syndicate members, Registered Brokers, RTAs or CDPs. UPI Bidders authorising an SCSB to block the Bid Amount in the ASBA Account could submit their ASBA Forms with the SCSBs. RIIs authorising an SCSB to block the Bid Amount in the ASBA Account could submit their ASBA Forms with the SCSBs (except UPI Bidders). Bidders, using the ASBA process to participate in the Offer, were required to ensure that the ASBA Account has sufficient credit balance such that an amount equivalent to the full Bid Amount could be blocked therein.

For all initial public offerings opening on or after September 1, 2022, as specified by SEBI, pursuant to its circular no. SEBI/HO/CFD/DIL2/P/CIR/2022/75 dated May 30, 2022, the ASBA applications in public issues shall be processed only after the application monies are blocked in the investor’s bank accounts. Stock Exchanges shall accept the ASBA applications in their electronic book building platform only with a mandatory confirmation on the application monies blocked. This circular is applicable for all ASBA Bidders and also for all modes through which the applications are processed.

UPI Bidders bidding through UPI Mechanism were required to provide the UPI ID in the relevant space provided in the Bid cum Application Form.

The prescribed colours of the Bid cum Application Forms for various categories were as follows:

Category Colour of Bid cum Application Form(1) Resident Indians including resident QIBs, Non-Institutional Investors, Retail Individual White Investors and Eligible NRIs applying on a non-repatriation basis(2) Non-Residents including FPIs, Eligible NRIs applying on a repatriation basis, FVCIs and Blue registered bilateral and multilateral development financial institutions(2) Anchor Investors(3) White Eligible Employees Bidding in the Employee Reservation Portion (4) Pink

(1) Excluding electronic Bid cum Application Forms 625(2) Electronic Bid cum Application forms was made available for download on the website of NSE (www.nseindia.com) and the BSE (www.bseindia.com)

(3) Bid cum Application Forms for Anchor Investors was made available at the office of the BRLMs

(4) Bid cum Application Forms for Eligible Employees was made available at the Registered Office of our Company.

In case of ASBA Forms, the relevant Designated Intermediaries were required to upload the relevant Bid details (including UPI ID in case of ASBA Forms under the UPI Mechanism) in the electronic bidding system of the Stock Exchanges.

The Equity Shares offered in the Offer have not been and will not be registered under the U.S. Securities Act or any state securities laws in the United States and, unless so registered, may not be offered or sold within the United States, except pursuant to an exemption from, or in a transaction not subject to, the registration requirements of the U.S. Securities Act and applicable state securities laws. Accordingly, the Equity Shares are only being offered and sold (i) within the United States only to persons reasonably believed to be “qualified institutional buyers” (as defined in Rule 144A under the U.S. Securities Act and referred to in this Prospectus as “U.S. QIBs”), for the avoidance of doubt, the term U.S. QIBs does not refer to a category of institutional investor defined under applicable Indian regulations and referred to in this Prospectus as “QIBs”) in transactions exempt from the registration requirements of the U.S. Securities Act, and (ii) outside the United States in offshore transactions as defined in and in compliance with Regulation S under the U.S. Securities Act and the applicable laws of the jurisdiction where those offers and sales occur.

The Equity Shares have not been and will not be registered, listed or otherwise qualified in any other jurisdiction outside India and may not be offered or sold, and Bids may not be made by persons in any such jurisdiction, except in compliance with the applicable laws of such jurisdiction.

Designated Intermediaries (other than SCSBs) were required to submit/deliver the Bid cum Application Forms (except ASBA Forms submitted by UPI Bidders) to the respective SCSB, where the Bidder has a bank account and could not submit it to any non-SCSB bank or any escrow collection bank. Pursuant to BSE notice having reference no. 20220803-40 dated August 3, 2022 and NSE circular No: 25/2022 dated August 3, 2022, has mandated that Trading Members, Syndicate Member(s), RTA and Depository Participants were required to submit Syndicate ASBA bids above ₹ 0.50 million and NII and QIB bids above ₹ 0.20 million through SCSBs only. For UPI Bidders, the Stock Exchanges were required to share the Bid details (including UPI ID) with the Sponsor Bank(s) on a continuous basis to enable the Sponsor Bank(s) to initiate a UPI Mandate Request to such UPI Bidders for blocking of funds. The NPCI was required to maintain an audit trail for every Bid entered in the Stock Exchanges bidding platform, and the liability to compensate UPI Bidders in case of failed transactions was with the concerned entity (i.e., the Sponsor Bank(s), NPCI or the issuer bank) at whose end the lifecycle of the transaction had come to a halt. The NPCI was required to share the audit trail of all disputed transactions/ investor complaints to the Sponsor Bank(s) and the issuer bank. The Sponsor Bank(s) and the Bankers to the Offer were required to provide the audit trail to the BRLMs for analysing the same and fixing liability. For ensuring timely information to investors, send SMS alerts as specified in SEBI ICDR Master Circular. Designated Intermediaries (other than SCSBs) could not accept any ASBA Form from a UPI Bidder who was not Bidding using the UPI Mechanism.

Stock Exchanges were required to validate the electronic bids with the records of the depository for DP ID/Client ID and PAN, on a real time basis through API integration and bring inconsistencies to the notice of the relevant Designated Intermediaries, for rectification and re-submission within the time specified by Stock Exchanges.

Stock Exchanges could allow modification of either DP ID/Client ID or PAN ID (but not both), bank code and location code in the Bid details already uploaded. For UPI Bidders, the Stock Exchanges were required to share the Bid details (including UPI ID) with the Sponsor Bank(s) on a continuous basis through API integration to enable the Sponsor Bank(s) to initiate UPI Mandate Request to UPI Bidders for blocking of funds. The Sponsor Bank(s) was required to initiate request for blocking of funds through NPCI to UPI Bidders, who could accept the UPI Mandate Request for blocking of funds on their respective mobile applications associated with UPI ID linked bank account. The Sponsor Bank(s) were required to undertake a reconciliation of Bid responses received from Stock Exchanges and send to NPCI and also ensure that all the responses received from NPCI were sent to the Stock Exchanges platform with detailed error code and description, if any. Further, the Sponsor Bank(s) were required to undertake reconciliation of all Bid requests and responses throughout their lifecycle on daily basis and share reports with BRLMs in the format and within the timelines as specified under the UPI Circulars. Sponsor Bank(s) and issuer banks were required to download UPI settlement files and raw data files from the NPCI portal after every settlement cycle and do a three-way reconciliation with Banks UPI switch data, CBS data and UPI raw data.

626The processing fees for applications made by the UPI Bidders using the UPI Mechanism could be released to the SCSBs only after such SCSBs provides a written confirmation in compliance with the SEBI RTA Master Circular, in a format prescribed by SEBI or applicable law.

Pursuant to BSE notice having reference no. 20220803-40 dated August 3, 2022 and NSE circular No: 25/2022, dated August 3, 2022, the following is applicable to all initial public offers opening on or after September 1, 2022:

a) Cut-off time for acceptance of UPI Mandate shall be up to 5:00 pm on the initial public offer closure date and existing process of UPI bid entry by syndicate members, registrars to the offer and depository participants shall continue till further notice;

b) There shall be no T+1 mismatch modification session for PAN-DP mismatch and bank/ location code on T+1 day for already uploaded bids. The dedicated window provided for mismatch modification on T+1 day shall be discontinued;

c) Bid entry and modification/ cancellation (if any) shall be allowed in parallel to the regular bidding period up to 4:00 p.m. for QIBs and Non-Institutional Bidders categories and up to 5.00 p.m. for Retail Individua on the initial public offer closure day;

d) QIBs and Non-Institutional Bidders can neither revise their bids downwards nor cancel/withdraw their bids; and e) Exchanges shall display bid details of only successful ASBA blocked applications i.e. Application with latest status as RC 100 –Block Request Accepted by Investor/ Client, based on responses/status received from the Sponsor Bank.

Electronic registration of Bids

(a) The Designated Intermediaries could register the Bids using the online facilities of the Stock Exchanges.

The Designated Intermediaries could also set up facilities for offline electronic registration of Bids, subject to the condition that they may subsequently upload the offline data file into the online facilities for Book Building on a regular basis before the closure of the Offer, subject to applicable laws.

(b) On the Bid/Offer Closing Date, the Designated Intermediaries could upload the Bids till such time as may be permitted by the Stock Exchanges and as disclosed in this Prospectus.

(c) Only Bids that are uploaded on the Stock Exchanges platform were considered for allocation/Allotment.

The Designated Intermediaries were given till 5:00 pm IST on the next Bid/Offer Closing Date to modify select fields uploaded in the Stock Exchange Platform during the Bid/Offer Period after which the Stock Exchange(s) send the bid information to the Registrar to the Offer for further processing.

(d) QIBs and Non-Institutional Bidders could neither revise their bids downwards nor cancel/withdraw their bids.

Participation by Promoters, Promoter Group, the BRLMs and the Syndicate Members and associates and/or affiliates of and/or persons related to Promoter/Promoter Group/the Book Running Lead Managers The BRLMs and the Syndicate Members were not allowed to purchase/subscribe to the Equity Shares in this Offer in any manner, except towards fulfilling their underwriting obligations. However, the associates and affiliates of the BRLMs and the Syndicate Members may Bid for Equity Shares in the Offer, either in the QIB Portion or in the Non-Institutional Portion as could be applicable to such Bidders, where the allocation is on a proportionate basis or in any other manner as introduced under applicable laws and such subscription could be on their own account or on behalf of their clients. All categories of investors, including associates or affiliates of the BRLMs and Syndicate Members, were required to be treated equally for the purpose of allocation to be made on a proportionate basis.

Except as stated below, neither the BRLMs nor any associate of the BRLMs could apply in the Offer under the

Anchor Investor Portion: a. mutual funds sponsored by entities which are associates of the BRLMs; b. insurance companies promoted by entities which are associates of the BRLMs;

627c. AIFs sponsored by the entities which are associate of the BRLMs; or d. FPIs other than individuals, corporate bodies and family offices sponsored by the entities which are associates of the BRLMs; or e. Pension funds sponsored by entities which are associates of the BRLMs.

Further, the Promoters, and the members of the Promoter Group have not participated by applying for Equity Shares in the Offer. Further, persons related to the Promoter(s) and Promoter Group did not apply in the Offer under the Anchor Investor Portion. However, a QIB who has any of the following rights in relation to our

Company shall be deemed to be a person related to the Promoters or Promoter Group of our Company: i. rights under a shareholders’ agreement or voting agreement entered into with the Promoters or Promoter Group of our Company;

ii. veto rights; or iii. right to appoint any nominee director on our Board.

Further, an Anchor Investor shall be deemed to be an “associate of the BRLM” if: a. either of them controls, directly or indirectly through its subsidiary or holding company, not less than 15% of the voting rights in the other; or b. either of them, directly or indirectly, by itself or in combination with other persons, exercises control over the other; or c. there is a common director, excluding nominee director, amongst the Anchor Investors and the BRLMs.

Bids by Mutual Funds With respect to Bids by Mutual Funds, a certified copy of their SEBI registration certificate was required to be lodged with the Bid cum Application Form. Failing this, our Company in consultation with the BRLMs, reserved the right to reject any Bid without assigning any reason thereof. Bids made by asset management companies or custodians of Mutual Funds shall specifically state names of the concerned schemes for which such Bids are made.

In case of a Mutual Fund, a separate Bid could be made in respect of each scheme of a Mutual Fund registered with the SEBI and such Bids in respect of more than one scheme of a Mutual Fund were not be treated as multiple Bids, provided that such Bids clearly indicate the scheme concerned for which the Bid was submitted.

No Mutual Fund scheme shall invest more than 10% of its net asset value in equity shares or equity related instruments of any single company provided that the limit of 10% shall not be applicable for investments in case of index funds or sector or industry specific scheme. No Mutual Fund under all its schemes should own more than 10% of any company’s paid-up share capital carrying voting rights. Applications made by an asset management company or a custodian of a Mutual Fund shall clearly indicate the name of the concerned scheme for which the Application is being made.

Bids by Eligible Non-Resident Indians Eligible NRIs were required to obtain copies of ASBA Form from the offices of the Designated Intermediaries.

Only Bids accompanied by payment in Indian Rupees or freely convertible foreign exchange were considered for Allotment under the reserved category. The NRIs who intend to make payment through Non-Resident Ordinary (“NRO”) accounts were required to use the form meant for residents. Eligible NRIs applying on a repatriation basis were required to authorise their respective SCSBs or confirm or accept the UPI Mandate Request (in case of UPI Bidders) to block their Non-Resident External (“NRE”) accounts, (including UPI ID, if activated) or Foreign Currency Non-Resident (“FCNR”) accounts, and Eligible NRIs Bidding on a non-repatriation basis were required to authorise their respective SCSBs or confirm or accept the UPI Mandate Request (in case of UPI Bidders) to block their NRO accounts for the full Bid amount, at the time of submission of the ASBA Form. NRIs applying in the Offer through the UPI Mechanism were advised to enquire with the relevant bank, whether their account is UPI linked, prior to submitting a ASBA Form.

628Eligible NRIs Bidding on a repatriation basis were advised to use the Bid cum Application Form meant for Non- Residents (blue in colour). Eligible NRIs Bidding on non-repatriation basis were advised to use the Bid cum Application Form for residents (white in colour).

Eligible NRIs were permitted to apply in the Offer through Channel I or Channel II (as specified in the SEBI UPI Circulars). Further, subject to applicable law, Eligible NRIs may use Channel IV (as specified in the SEBI UPI Circulars) to apply in the Offer, provided the UPI facility is enabled for their NRE/NRO accounts.

In accordance with the FEMA rules, the total holding by any individual NRI, on a repatriation basis, shall not exceed 5% of the total paid-up equity capital on a fully diluted basis or shall not exceed 5% of the paid-up value of each series of debentures or preference shares or share warrants issued by an Indian company and the total holdings of all NRIs and OCIs put together shall not exceed 10% of the total paid-up equity capital on a fully diluted basis or shall not exceed 10% of the paid-up value of each series of debentures or preference shares or share warrant. Provided that the aggregate ceiling of 10% may be raised to 24% if a special resolution to that effect is passed by the general body of the Indian company.

Participation of Eligible NRI(s) in the Offer was subjected to the FEMA Rules. Only Bids accompanied by payment in Indian rupees or fully converted foreign exchange shall be considered for Allotment.

For details of restrictions on investment by NRIs, see “Restrictions on Foreign Ownership of Indian Securities” on page 644.

Bids by Hindu Undivided Families Bids by Hindu Undivided Families or HUFs, should be made in the individual name of the Karta. The Bidder was

required to specify that the Bid is being made in the name of the HUF in the Bid cum Application Form as follows: “Name of sole or first Bidder: XYZ Hindu Undivided Family applying through XYZ, where XYZ is the name of the Karta”. Bids by HUFs were considered at par with Bids from individuals.

Bids by Foreign Portfolio Investors In case of Bids made by FPIs, a certified copy of the certificate of registration issued under the SEBI FPI Regulations is required to be attached to the Bid cum Application Form, failing which our Company in consultation with the BRLMs, reserve the right to reject any Bid without assigning any reason. FPIs who wish to participate in the Offer are advised to use the Bid cum Application Form for Non-Residents (blue in colour).

FPIs are permitted to participate in the Offer subject to compliance with conditions and restrictions specified under the FEMA Rules and as specified by the Government of India from time to time.

In terms of the FEMA Rules and Securities and Exchange Board of India (Foreign Portfolio Investor) Regulations 2019 (“SEBI FPI Regulations”), investment in the Equity Shares by a single FPI or an investor group (which means multiple entities registered as foreign portfolio investors and directly and indirectly having common ownership of more than 50% or common control) shall be below 10% of our post-Offer equity share capital on a fully diluted basis. In case the total holding of an FPI or investor group increases beyond 10% of the total paid-up equity capital of our Company, on a fully diluted basis or 10% or more of the paid-up value of any series of debentures or preference shares or share warrants issued that may be issued by our Company, the total investment made by the FPI or investor group were re-classified as FDI subject to the conditions as specified by SEBI and the RBI in this regard and our Company and the investor were required to comply with applicable reporting requirements. Further, the total holdings of all FPIs put together, with effect from April 1, 2020, can be up to the sectoral cap applicable to the sector in which our Company operates (i.e., up to 100%). In terms of the FEMA Rules, for calculating the aggregate holding of FPIs in a company, holding of all registered FPIs shall be included.

In terms of the FEMA Rules, for calculating the aggregate holding of FPIs in a company, holding of all registered FPIs shall be included.

To ensure compliance with the above requirement, SEBI, pursuant to its circular dated July 13, 2018, has directed that at the time of finalisation of the Basis of Allotment, the Registrar shall (i) use the PAN issued by the Income Tax Department of India for checking compliance for a single FPI; and (ii) obtain validation from Depositories for the FPIs who have invested in the Offer to ensure there is no breach of the investment limit, within the timelines for Offer procedure, as prescribed by SEBI from time to time.

629Subject to compliance with all applicable Indian laws, rules, regulations, guidelines and approvals in terms of Regulation 21 of the SEBI FPI Regulations, an FPI is permitted to issue, subscribe to, or otherwise deal in offshore derivative instruments, directly or indirectly, only if it complies with the following conditions:

(a) such offshore derivative instruments are issued only by persons registered as category I FPIs;

(b) such offshore derivative instruments are issued only to persons eligible for registration as category I FPIs;

(c) such offshore derivative instruments are issued after compliance with the ‘know your client’ norms as specified by SEBI; and

(d) such other conditions as may be specified by SEBI from time to time.

An FPI is required to ensure that any transfer of an offshore derivative instruments issued by or on behalf of it, is subject to (a) the transfer being made to persons which fulfil the criteria provided under Regulation 21(1) of the SEBI FPI Regulations (as mentioned above from points (a) to (d)) and (b) prior consent of the FPI is obtained for such transfer, except in cases, where the persons to whom the offshore derivative instruments are to be transferred, are pre-approved by the FPI.

Further, Bids received from FPIs bearing the same PAN were treated as multiple Bids and were liable to be rejected, except for Bids from FPIs that utilize the multiple investment manager structure in accordance with the Operational Guidelines for Foreign Portfolio Investors and Designated Depository Participants which were issued in November 2019 to facilitate implementation of SEBI FPI Regulations (such structure “MIM Structure”)

provided such Bids were made with different beneficiary account numbers, Client IDs and DP IDs. Accordingly, it should be noted that multiple Bids received from FPIs, who do not utilize the MIM Structure, and bear the same PAN, are liable to be rejected. In order to ensure valid Bids, FPIs making multiple Bids using the same PAN, and with different beneficiary account numbers, Client IDs and DP IDs, were required to provide a confirmation along with each of their Bid cum Application Forms that the relevant FPIs making multiple Bids utilize the MIM Structure and indicate the names of their respective investment managers in such confirmation. In the absence of such confirmation from the relevant FPIs, such multiple Bids were liable to be rejected. Further, in the following cases, Bids by FPIs were to be treated as multiple Bids: (i) FPIs which utilise the MIM Structure, indicating the name of their respective investment managers in such confirmation; (ii) offshore derivative instruments (“ODI”) which have obtained separate FPI registration for ODI and proprietary derivative investments; (iii) sub funds or separate class of investors with segregated portfolio who obtain separate FPI registration; (iv) FPI registrations granted at investment strategy level/sub fund level where a collective investment scheme or fund has multiple investment strategies/sub-funds with identifiable differences and managed by a single investment manager; (v) multiple branches in different jurisdictions of foreign bank registered as FPIs; (vi) Government and Government related investors registered as category I FPIs; and (vii) Entities registered as collective investment scheme having multiple share classes.

The Bids belonging to any of the above mentioned seven structures and having same PAN were required to be collated and identified as a single Bid in the Bidding process. The Equity Shares allotted in the Bid may be proportionately distributed to the applicant FPIs (with same PAN).

For details, see “Restrictions on Foreign Ownership of Indian Securities” on page 644.

Bids by SEBI registered Alternative Investment Funds, Venture Capital Funds and Foreign Venture Capital Investors The Securities and Exchange Board of India (Alternative Investment Funds) Regulations, 2012 (the “SEBI AIF Regulations”) prescribe, amongst others, the investment restrictions on AIFs. The SEBI FVCI Regulations as amended, inter alia, prescribe the investment restrictions on VCFs, and FVCIs registered with SEBI.

The category I and II AIFs cannot invest more than 25% of their investible funds in one investee company. A category III AIF cannot invest more than 10% of its investible funds in one investee company. A VCF registered as a category I AIF, cannot invest more than one-third of its investible funds, in the aggregate, in certain specified instruments, including by way of subscription to an initial public offering of a venture capital undertaking. An FVCI can invest only up to 33.33% of its investible funds, in the aggregate, in certain specified instruments, which includes subscription to an initial public offering of a venture capital undertaking or an investee company (as defined under the SEBI AIF Regulations).

630In terms of Regulation 20(20) of SEBI AIF Regulations, every AIF, manager of the AIF and key management personnel of the manager and the AIF shall exercise specific due diligence, with respect to investors and investments of the AIF, to prevent facilitation of circumvention of such laws, as may be specified by SEBI from time to time. In this regard, SEBI through its circular dated October 8, 2024 mandates that for every scheme of AIFs having an investor, or investors belonging to the same group, who contribute(s) 50% or more to the corpus of the scheme, necessary due diligence as per the implementation standards formulated by Standard Setting Forum for AIFs (“SFA”), shall be carried out prior to availing benefits available to QIBs under SEBI ICDR Regulations and other SEBI regulations.

There is no reservation for Eligible NRI Bidders, AIFs, FPIs and FVCIs. All Bidders were treated on the same basis with other categories for the purpose of allocation.

All NRIs were required to note that refunds (in case of Anchor Investors), dividends and other distributions, if any, were payable in Indian Rupees only and net of bank charges and commission.

Our Company and the Book Running Lead Managers will not be responsible for loss, if any, incurred by the Bidder on account of conversion of foreign currency.

Participation of AIFs, VCFs and FVCIs were subject to the FEMA Rules. For details, see “Restrictions on Foreign Ownership of Indian Securities” on page 644.

Bids by limited liability partnerships In case of Bids made by limited liability partnerships registered under the Limited Liability Partnership Act, 2008, a certified copy of certificate of registration issued under the Limited Liability Partnership Act, 2008, was required to be attached to the Bid cum Application Form. Failing this, our Company in consultation with the BRLMs, reserved the right to reject any Bid without assigning any reason thereof.

Bids by banking companies In case of Bids made by banking companies registered with RBI, certified copies of: (i) the certificate of registration issued by RBI, and (ii) the approval of such banking company’s investment committee were required to be attached to the Bid cum Application Form, failing which our Company in consultation with the BRLMs, reserved the right to reject any Bid without assigning any reason therefore, subject to applicable law.

The investment limit for banking companies in non-financial services companies as per the Banking Regulation Act, 1949 (the “Banking Regulation Act”), and Master Direction – Reserve Bank of India (Financial Services

provided by Banks) Directions, 2016, is 10% of the paid-up share capital of the investee company or 10% of the bank’s own paid-up share capital and reserves, whichever is lower. Further, the aggregate equity investments in subsidiaries and other entities engaged in financial and non-financial services, including overseas investments, cannot exceed 20% of the bank’s paid-up share capital and reserves. However, a banking company may hold up to 30% of the paid-up share capital of the investee company with the prior approval of the RBI, provided that the investee company is engaged in non-financial activities in which banking companies are permitted to engage under the Banking Regulation Act or the additional acquisition is through restructuring of debt/corporate debt restructuring/strategic debt restructuring, or to protect the bank’s interest on loans/investments made to a company. The bank is required to submit a time-bound action plan for disposal of such shares within a specified period to the RBI. A banking company would require a prior approval of the RBI to make investment in excess of 30% of the paid-up share capital of the investee company, investment in a subsidiary and a financial services company that is not a subsidiary (with certain exceptions prescribed), and investment in a non-financial services company in excess of 10% of such investee company’s paid-up share capital as stated in the Reserve Bank of India (Financial Services provided by Banks) Directions, 2016, as amended. Bids by banking companies should not exceed the investment limits prescribed for them under the applicable laws.

Bids by Self-Certified Syndicate Banks Self-Certified Syndicate Banks (“SCSBs”) participating in the Offer were required to comply with the terms of the circular (CIR/CFD/DIL/12/2012) dated September 13, 2012 and circular (CIR/CFD/DIL/1/2013) dated January 2, 2013 issued by SEBI. Such SCSBs were required to ensure that for making applications on their own account using ASBA, they should have a separate account in their own name with any other SEBI registered SCSBs. Further, such account were required to be used solely for the purpose of making application in public issues and clear demarcated funds was available in such account for such Bids.

631Bids by Eligible Employees The Bid must be for a minimum of 120 Equity Shares of face value of ₹ 10 each, and in multiples of 120 Equity Shares of face value of ₹ 10 each, thereafter so as to ensure that the Bid Amount payable by the Eligible Employee did not exceed ₹ 0.50 million (net of Employee Discount). The Allotment in the Employee Reservation Portion were on a proportionate basis. Eligible Employees under the Employee Reservation Portion may Bid at Cut-off Price provided that the Bid does not exceed ₹ 0.50 million (net of Employee Discount).

However, Allotments to Eligible Employees in excess of ₹ 0.20 million (net of Employee Discount) shall be considered on a proportionate basis, in the event of undersubscription in the Employee Reservation Portion, subject to the total Allotment to an Eligible Employee not exceeding ₹ 0.50 million (net of Employee Discount) (which were less Employee Discount). Subsequent undersubscription, if any, in the Employee Reservation Portion shall be added back to the Net Offer. Eligible Employees Bidding in the Employee Reservation Portion may Bid at the Cut-off Price.

Bids under Employee Reservation Portion by Eligible Employees was required to be: a) Made only in the prescribed Bid cum Application Form or Revision Form (i.e., pink colour form). b) The Bidder should be an Eligible Employee as defined. In case of joint bids, the first Bidder shall be an Eligible Employee.

c) Only Eligible Employees were eligible to apply in the Offer under the Employee Reservation Portion. d) Only those Bids, which were received at or above the Offer Price, net of Employee Discount would be considered for Allotment under this category.

e) Eligible Employees could apply at Cut-off Price. f) If the aggregate demand in this category is less than or equal to 176,991 Equity Shares of face value of ₹ 10 each, at or above the Offer Price, full allocation shall be made to the Eligible Employees to the extent of their demand.

g) Eligible Employee Bidding in the Employee Reservation Portion can also Bid under the Net Offer and such Bids will not be treated as multiple Bids subject to applicable limits. Eligible Employee can also apply under Retail Portion.

h) Our Company reserves the right to reject, in its absolute discretion, all or any multiple Bids in any or all categories. i) As per the SEBI ICDR Master Circular, Eligible Employees Bidding in the Employee Reservation Portion were required to Bid through the UPI mechanism.

j) Under-subscription, if any, in the Employee Reservation Portion was added back to the Net Offer.

In case of under-subscription in the Net Offer, spill over to the extent of under-subscription shall be permitted from the Employee Reservation Portion. If the aggregate demand in this category is greater than 176,991 Equity Shares of face value of ₹ 10 each, at or above the Offer Price, the allocation shall be made on a proportionate basis. Please note that any individuals who are directors, employees or promoters of (a) the BRLMs, Registrar to the Offer, or the Syndicate Members, or of the (b) ‘associate companies’ (as defined in the Companies Act 2013, as amended) and ‘group companies’ of such BRLMs, Registrar to the Offer or Syndicate Members are not eligible to bid in the Employee Reservation Portion.

Bids by insurance companies In case of Bids made by insurance companies registered with the IRDAI, a certified copy of certificate of registration issued by IRDAI were required to be attached to the Bid cum Application Form. Failing this, our Company in consultation with the BRLMs, reserved the right to reject any Bid without assigning any reason thereof, subject to applicable law.

The exposure norms for insurers are prescribed under the Insurance Regulatory and Development Authority of India (Actuarial, Finance and Investment Functions of Insurers) Regulations, 2024 (“IRDAI AFIFI 632Regulations”), and are based on investments in the equity shares of a company, the entire group of the investee company and the industry sector in which the investee company operates. Insurance companies are entitled to invest only in other listed insurance companies and insurance companies participating in the Offer were advised to refer to the IRDAI AFIFI Regulations, for specific investment limits applicable to them and shall comply with all applicable regulations, guidelines and circulars issued by IRDAI from time to time.

Bids by Systemically Important Non-Banking Financial Companies In case of Bids made by NBFC-SI, a certified copy of the certificate of registration issued by the RBI, a certified copy of its last audited financial statements on a standalone basis and a net worth certificate from its statutory auditor(s) and such other approvals as may be required by the NBFC-SI, must be attached to the Bid cum Application Form. Failing this, our Company in consultation with the BRLMs, reserved the right to reject any Bid, without assigning any reason thereof. NBFC-SI participating in the Offer shall comply with all applicable regulations, guidelines and circulars issued by RBI from time to time.

The investment limit for NBFC-SI shall be as prescribed by RBI from time to time.

Bids under Power of Attorney In case of Bids made pursuant to a power of attorney by limited companies, corporate bodies, registered societies, Eligible FPIs, AIFs, Mutual Funds, insurance companies, NBFC-SI, insurance funds set up by the army, navy or air force of India, insurance funds set up by the Department of Posts, India or the National Investment Fund and provident funds with a minimum corpus of ₹ 250 million (subject to applicable laws) and pension funds with a minimum corpus of ₹ 250 million registered with the Pension Fund Regulatory and Development Authority established under Section 3 (1) of the Pension Fund Regulatory and Development Authority Act, 2013, a certified copy of the power of attorney or the relevant resolution or authority, as the case may be, along with a certified copy of the memorandum of association and articles of association and/or bye laws must be lodged along with the Bid cum Application Form. Failing this, our Company in consultation with the BRLMs, reserved the right to accept or reject any Bid in whole or in part, in either case, without assigning any reason thereof.

Our Company in consultation with the BRLMs, in their absolute discretion, reserved the right to relax the above condition of simultaneous lodging of the power of attorney along with the Bid cum Application Form, subject to such terms and conditions that our Company in consultation with the BRLMs, may deem fit.

Bids by Limited Liability Partnerships In case of Bids made by limited liability partnerships registered under the Limited Liability Partnership Act, 2008, a certified copy of certificate of registration issued under the Limited Liability Partnership Act, 2008, were required to be attached to the Bid cum Application Form. Failing this, our Company, in consultation with the BRLMs, reserved the right to reject any Bid without assigning any reason thereof.

Bids by Anchor Investors In accordance with the SEBI ICDR Regulations, in addition to details and conditions mentioned in this section,

the key terms for participation by Anchor Investors are provided below:

1. Anchor Investor Application Forms were made available for the Anchor Investor Portion at the offices of the Book Running Lead Managers.

2. The Bid must be for a minimum of such number of Equity Shares so that the Bid Amount exceeds ₹

100.00 million. A Bid cannot be submitted for over 60% of the QIB Portion. In case of a Mutual Fund, separate Bids by individual schemes of a Mutual Fund were aggregated to determine the minimum application size of ₹ 100.00 million.

3. One-third of the Anchor Investor Portion was reserved for allocation to Mutual Funds.

4. Bidding for Anchor Investors was open one Working Day before the Bid/Offer Opening Date, and was completed on the same day.

5. Our Company, in consultation with the BRLMs, finalized allocation to the Anchor Investors on a discretionary basis, provided that the minimum number of Allottees in the Anchor Investor Portion was

not less than:(a) maximum of two Anchor Investors, where allocation under the Anchor Investor Portion 633was up to ₹ 100.00 million; (b) minimum of two and maximum of 15 Anchor Investors, where the allocation under the Anchor Investor Portion was more than ₹ 100.00 million but up to ₹ 2,500 million, subject to a minimum Allotment of ₹ 50.00 million per Anchor Investor; and(c) in case of allocation above ₹ 2,500 million under the Anchor Investor Portion, a minimum of five such investors and a maximum of 15 Anchor Investors for allocation up to ₹ 2,500 million, and an additional 10 Anchor Investors for every additional ₹ 2,500 million, subject to minimum allotment of ₹ 50.00 million per Anchor Investor.

6. Allocation to Anchor Investors was completed on the Anchor Investor Bidding Date. The number of Equity Shares allocated to Anchor Investors and the price at which the allocation was made, was made available in the public domain by the Book Running Lead Managers before the Bid/Offer Opening Date, through intimation to the Stock Exchanges.

7. Anchor Investors could not withdraw or lower the size of their Bids at any stage after submission of the Bid.

8. 50% Equity Shares Allotted to Anchor Investors in the Anchor Investor Portion shall be locked-in for a period of 90 days from the date of Allotment and the remaining 50% shall be locked-in for a period of 30 days from the date of Allotment.

9. Neither the (a) Book Running Lead Managers (s) or any associate of the Book Running Lead Managers (other than mutual funds sponsored by entities which are associate of the Book Running Lead Managers or insurance companies promoted by entities which are associate of the Book Running Lead Managers or Alternate Investment Funds (AIFs) sponsored by the entities which are associates of the Book Running Lead Managers or FPIs, other than individuals, corporate bodies and family offices, sponsored by the entities which are associate of the Book Running Lead Managers) or pension fund sponsored by entities which are associate of the Book Running Lead Managers nor (b) the Promoters, Promoter Group or any person related to the Promoter or member of the Promoter Group shall apply under the Anchor Investors category.

10. Bids made by QIBs under both the Anchor Investor Portion and the QIB Portion were not considered multiple Bids.

For more information, please read the General Information Document.

Bids by provident funds/pension funds In case of Bids made by provident funds/pension funds, subject to applicable laws, with minimum corpus of ₹

250.00 million, registered with the Pension Fund Regulatory and Development Authority established under sub-

section (1) of section 3 of the Pension Fund Regulatory and Development Authority Act, 2013, subject to applicable law, a certified copy of certificate from a chartered accountant certifying the corpus of the provident fund/pension fund must be attached to the Bid cum Application Form. Failing this, our Company in consultation with the BRLMs, reserved the right to reject any Bid, without assigning any reason therefor.

Bidders were advised to make their independent investigations and ensure that any single Bid from them did not exceed the applicable investment limits or maximum number of the Equity Shares that could be held by them under applicable laws or regulations and as specified in this Prospectus, when filed. Further, each Bidder was required to agree in the Allotment Advice that such Bidder will not sell or transfer any Equity Shares or any economic interest therein, including any off-shore derivative instruments, such as participatory notes, issued against the Equity Shares or any similar security, other than in accordance with applicable laws.

In accordance with RBI regulations, OCBs could not participate in the Offer.

Pre-Offer and Price Band Advertisement Subject to Section 30 of the Companies Act 2013, our Company published a pre-Offer and price band advertisement, in the form prescribed by the SEBI ICDR Regulations, in all editions of English national daily newspaper, Financial Express, all editions of Hindi national daily newspaper, Jansatta and Bengaluru edition of a Kannada daily newspaper, Vishwavani, Kannada being the regional language of Karnataka, India, where our Registered Office is located. Our Company stated the Bid/Offer Opening Date, the Bid/Offer Closing Date and the QIB Bid/Offer Closing Date in the pre-Offer and price band advertisement. This advertisement, subject to the 634provisions of Section 30 of the Companies Act 2013, was in the format prescribed in Part A of Schedule X of the SEBI ICDR Regulations.

Allotment Advertisement Our Company, the BRLMs and the Registrar shall publish an allotment advertisement before commencement of trading, disclosing the date of commencement of trading in all editions of English national daily newspaper, Financial Express, all editions of Hindi national daily newspaper, Jansatta and Bengaluru edition of a Kannada daily newspaper, Vishwavani, Kannada being the regional language of Karnataka, where our Registered Office is located.

The allotment advertisement shall be uploaded on the websites of our Company, the BRLMs and the Registrar to the Offer, before 9:00 p.m. IST, on the date of receipt of the final listing and trading approval from all the Stock Exchanges where the Equity Shares are proposed to be listed, provided such final listing and trading approval from all the Stock Exchanges is received prior to 9:00 p.m. IST on that day. In an event, if final listing and trading approval from all the Stock Exchanges is received post 9:00 p.m. IST on the date of receipt of the final listing and trading approval from all the Stock Exchanges where the Equity Shares are proposed to be listed, then the allotment advertisement shall be uploaded on the websites of our Company, the BRLMs and the Registrar to the Offer, following the receipt of final listing and trading approval from all the Stock Exchanges.

Signing of Underwriting Agreement and filing of Prospectus with the Registrar of Companies Our Company and the Selling Shareholders have entered into an underwriting agreement with the Underwriters on December 5, 2025 and underwriting arrangements are complete in all material respects.

Information for Bidders The relevant Designated Intermediary was required to enter a maximum of three Bids at different price levels opted in the Bid cum Application Form and such options were not considered as multiple Bids. It was the Bidder’s responsibility to obtain the Acknowledgment Slip from the relevant Designated Intermediary. The registration of the Bid by the Designated Intermediary did not guarantee that Equity Shares shall be Allocated/Allotted. Such Acknowledgement Slip was non-negotiable and by itself did not create any obligation of any kind. When a Bidder revises his or her Bid, he /she was required to surrender the earlier Acknowledgement Slip and request for a revised acknowledgment slip from the relevant Designated Intermediary as proof of his or her having revised the previous Bid. In relation to electronic registration of Bids, the permission given by the Stock Exchanges to use their network and software of the electronic bidding system could not in any way be deemed or construed to mean that the compliance with various statutory and other requirements by our Company, the Selling Shareholders and/or the Book Running Lead Managers were cleared or approved by the Stock Exchanges; nor does it in any manner warrant, certify or endorse the correctness or completeness of compliance with the statutory and other requirements, nor did it take any responsibility for the financial or other soundness of our Company, the management or any scheme or project of our Company; nor does it in any manner warrant, certify or endorse the correctness or completeness of any of the contents of this Prospectus; nor did it warrant that the Equity Shares will be listed or will continue to be listed on the Stock Exchanges.

General Instructions Please note that QIBs and Non-Institutional Investors were not permitted to withdraw their Bid(s) or lower the size of their Bid(s) (in terms of quantity of Equity Shares or the Bid Amount) at any stage. Retail Individual Investors and Eligible Employees Bidding under the Employee Reservation Portion could revise their Bid(s) during the Bid/Offer Period and withdraw their Bid(s) until Bid/Offer Closing Date. Anchor Investors were not allowed to withdraw or lower the size of their Bids after the Anchor Investor Bidding Date.

Do’s:

1. Check if you are eligible to apply as per the terms of the Red Herring Prospectus and under applicable law, rules, regulations, guidelines and approvals;

2. Ensure that you have Bid within the Price Band;

3. Ensure that you (other than Anchor Investors) have mentioned the correct ASBA Account number (for all Bidders other than UPI Bidders) in the Bid cum Application Form (with a maximum length of 45 635characters) and such ASBA account belongs to you and no one else. Further, UPI Bidders must also mention their UPI ID and shall use only his/her own bank account which is linked to his/her UPI ID;

4. UPI Bidders shall ensure that the bank, with which they have their bank account, where the funds equivalent to the application amount are available for blocking is UPI 2.0 certified by NPCI before submitting the ASBA Form to any of the Designated Intermediaries;

5. UPI Bidders Bidding through the SCSBs and mobile applications shall ensure that the name of the bank appears in the list of SCSBs which are live on UPI, as displayed on the SEBI website. UPI Bidders shall ensure that the name of the app and the UPI handle which is used for making the application appears on the list displayed on the SEBI website. An application made using incorrect UPI handle or using a bank account of an SCSB or bank which is not mentioned on the SEBI website is liable to be rejected;

6. Read all the instructions carefully and complete the Bid cum Application Form in the prescribed form;

7. Ensure that the details about the PAN, DP ID, Client ID and UPI ID (where applicable) are correct and the Bidders depository account is active, as Allotment of the Equity Shares will be in dematerialized form only;

8. Ensure that your PAN is linked with Aadhaar and are in compliance with Central Board of Direct Taxes

notification dated February 13, 2020, press release dated June 25, 2021, September 17, 2021 and CBDT

circular no. 7 of 2022, dated March 30, 2022 read with press release dated March 28, 2023 and any subsequent press releases in this regard;

9. Ensure that your Bid cum Application Form bearing the stamp of a Designated Intermediary is submitted to the Designated Intermediary at the Bidding Centre within the prescribed time. UPI Bidders, may submit their ASBA Forms with Syndicate Members, Registered Brokers, RTAs or CDPs and should ensure that the ASBA Form contains the stamp of such Designated Intermediary;

10. In case of joint Bids, ensure that first Bidder is the ASBA Account holder (or the UPI-linked bank account holder, as the case may be) and the signature of the first Bidder is included in the Bid cum Application Form;

11. If the first Bidder is not the ASBA Account holder (or the UPI-linked bank account holder, as the case may be), ensure that the Bid cum Application Form is signed by the ASBA Account holder (or the UPI- linked bank account holder, as the case may be). Bidders (except UPI Bidders) should ensure that they have an account with an SCSB and have mentioned the correct bank account number of that SCSB in the Bid cum Application Form. UPI Bidders Bidding should ensure that they have mentioned the correct UPI-linked bank account number and their correct UPI ID in the Bid cum Application Form;

12. All Bidders (other than Anchor Investors) should submit their Bids through the ASBA process only;

13. Ensure that the name(s) given in the Bid cum Application Form is/are exactly the same as the name(s) in which the beneficiary account is held with the Depository Participant. In case of joint Bids, the Bid cum Application Form should contain only the name of the First Bidder whose name should also appear as the first holder of the beneficiary account held in joint names;

14. Ensure that you request for and receive a stamped acknowledgement in the form of a counterfoil or by specifying the application number for all your Bid options as proof of registration of the Bid cum Application Form from the concerned Designated Intermediary;

15. Ensure that you have funds equal to the Bid Amount in the ASBA Account maintained with the SCSB before submitting the ASBA Form to any of the Designated Intermediaries;

16. Submit revised Bids to the same Designated Intermediary, through whom the original Bid was placed and obtain a revised acknowledgment;

17. Except for Bids (i) on behalf of the Central or State Governments and the officials appointed by the courts, who, in terms of circular (MRD/DoP/Cir-20/2008) dated June 30, 2008 issued by the SEBI, may be exempt from specifying their PAN for transacting in the securities market, (ii) Bids by persons resident in the state of Sikkim, who, in terms of circular (MRD/DoP/Cir-09/06) dated July 20, 2006, may be exempted from specifying their PAN for transacting in the securities market, and (iii) any other category 636of Bidders, including without limitation, multilateral/bilateral institutions, which may be exempted from specifying their PAN for transacting in the securities market, all Bidders should mention their PAN allotted under the IT Act. The exemption for the Central or the State Government and officials appointed by the courts and for investors residing in the State of Sikkim is subject to (a) the Demographic Details received from the respective depositories confirming the exemption granted to the beneficiary owner by a suitable description in the PAN field and the beneficiary account remaining in “active status”; and (b) in the case of residents of Sikkim, the address as per the Demographic Details evidencing the same. All other applications in which PAN is not mentioned will be rejected;

18. Ensure that the Demographic Details are updated, true and correct in all respects;

19. Ensure that thumb impressions and signatures other than in the languages specified in the Eighth Schedule to the Constitution of India are attested by a Magistrate or a Notary Public or a Special Executive Magistrate under official seal;

20. Ensure that the category and the investor status is indicated in the Bid cum Application Form to ensure proper upload of your Bid in the electronic Bidding system of the Stock Exchanges;

21. Ensure that in case of Bids under power of attorney or by limited companies, corporates, trusts, etc., relevant documents, including a copy of the power of attorney, are submitted;

22. Ensure that Bids submitted by any person outside India should be in compliance with applicable foreign and Indian laws;

23. Bidders (except UPI Bidders) should instruct their respective banks to release the funds blocked in the ASBA Account under the ASBA process. UPI Bidders, should ensure that they approve the UPI Mandate Request generated by the Sponsor Bank(s) to authorise blocking of funds equivalent to Bid Amount and subsequent debit of funds in case of Allotment, in a timely manner;

24. Note that in case the DP ID, Client ID and the PAN mentioned in their Bid cum Application Form and entered into the online IPO system of the Stock Exchanges by the relevant Designated Intermediary, as the case may be, do not match with the DP ID, Client ID and PAN available in the Depository database, then such Bids are liable to be rejected. However, Bids received from FPIs bearing the same PAN shall not be treated as multiple Bids in the event such FPIs utilize the MIM Structure and such Bids such Bids have been made with different beneficiary account numbers, Client IDs and DP IDs;

25. Ensure that while Bidding through a Designated Intermediary, the Bid cum Application Form (other than for Anchor Investors and UPI Bidders) is submitted to a Designated Intermediary in a Bidding Centre and that the SCSB where the ASBA Account, as specified in the ASBA Form, is maintained has named at least one branch at that location for the Designated Intermediary to deposit ASBA Forms (a list of such branches is available on the website of SEBI at www.sebi.gov.in);

26. Ensure that you have correctly signed the authorization/undertaking box in the Bid cum Application Form, or have otherwise provided an authorization to the SCSB or the Sponsor Bank(s), as applicable via the electronic mode, for blocking funds in the ASBA Account equivalent to the Bid Amount mentioned in the Bid cum Application Form at the time of submission of the Bid;

27. UPI Bidders shall ensure that details of the Bid are reviewed and verified by opening the attachment in the UPI Mandate Request and then proceed to authorise the UPI Mandate Request using his/her UPI PIN.

Upon the authorization of the mandate using his/her UPI PIN, the UPI Bidder may be deemed to have verified the attachment containing the application details of the UPI Bidder Bidding using the UPI Mechanism in the UPI Mandate Request and have agreed to block the entire Bid Amount and authorized the Sponsor Bank(s) to issue a request to block the Bid Amount mentioned in the ASBA Form in his/her ASBA Account;

28. UPI Bidders should mention valid UPI ID of only the Bidder (in case of single account) and of the first Bidder (in case of joint account) in the ASBA Form;

29. UPI Bidders who have revised their Bids subsequent to making the initial Bid, should also approve the revised UPI Mandate Request generated by the Sponsor Bank(s) to authorise blocking of funds equivalent to the revised Bid Amount in their account and subsequent debit of funds in case of allotment in a timely manner;

63730. The ASBA Bidders shall ensure that bids above ₹ 0.50 million, are uploaded only by the SCSBs;

31. Bids by Eligible NRIs, HUFs and FPIs other than individuals, corporate bodies and family offices, for a Bid Amount of less than ₹ 0.20 million would be considered under the Retail Portion for the purposes of allocation and Bids for a Bid Amount exceeding ₹ 0.20 million would be considered under the Non- Institutional Portion for allocation in the Offer;

32. Ensure that Anchor Investors submit their Bid cum Application Forms only to the BRLMs; and

33. Ensure that the Bid cum Application Forms are delivered by the Bidders within the time prescribed as per the Bid cum Application Form and this Red Herring Prospectus. Application made using incorrect UPI handle or using a bank account of an SCSB or SCSBs which is not mentioned on the website of the SEBI, is liable to be rejected.

Don’ts:

1. Do not Bid for lower than the minimum Bid size;

2. Do not Bid/revise Bid Amount to less than the Floor Price or higher than the Cap Price;

3. Do not Bid on another Bid cum Application Form, as the case may be after you have submitted a Bid to a Designated Intermediary;

4. Do not pay the Bid Amount in cash, by money order, cheques or demand drafts or by postal order or by stock invest;

5. Do not send Bid cum Application Forms by post; instead submit the same to the Designated Intermediary only;

6. Anchor Investors should not Bid through the ASBA process;

7. If you are a UPI Bidder, do not submit more than one Form from each UPI ID;

8. Do not submit the Bid cum Application Forms to any non-SCSB bank or to our Company or at a location other than the Bidding Centres;

9. Do not Bid on a physical Bid cum Application Form that does not have the stamp of the relevant Designated Intermediary;

10. Do not Bid at Cut-off Price (for Bids by QIBs and Non-Institutional Bidders);

11. Do not fill up the Bid cum Application Form such that the Equity Shares Bid for exceeds the Offer size and/or investment limit or maximum number of the Equity Shares that can be held under the applicable laws or regulations or maximum amount permissible under the applicable regulations or under the terms of the Red Herring Prospectus;

12. Do not submit your Bid after 3.00 pm on the Bid/Offer Closing Date;

13. If you are a QIB, do not submit your Bid after 3.00 p.m. on the QIB Bid/Offer Closing Date (for online applications) and after 12:00 p.m. on the Bid/Offer Closing Date (for physical applications);

14. Do not Bid for Equity Shares in excess in excess of what is specified for each category;

15. Do not Bid for a Bid Amount exceeding ₹ 0.20 million for Bids by Retail Individual Investors and Eligible Employees Bidding in the Employee Reservation Portion (net of employee discount, if any);

16. Do not submit the General Index Register number instead of the PAN;

17. Do not submit incorrect details of the DP ID, Client ID, PAN and UPI ID (where applicable) or provide details for a beneficiary account which is suspended or for which details cannot be verified by the Registrar to the Offer;

63818. Do not submit the Bid without ensuring that funds equivalent to the entire Bid Amount are available for blocking in the relevant ASBA Account or in the case of UPI Bidders, in the UPI-linked bank account where funds for making the Bid are available;

19. Do not withdraw your Bid or lower the size of your Bid (in terms of quantity of the Equity Shares or the Bid Amount) at any stage, if you are a QIB or a Non-Institutional Investor;

20. Do not submit Bids on plain paper or on incomplete or illegible Bid cum Application Forms or on Bid cum Application Forms in a colour prescribed for another category of Bidder;

21. Do not link the UPI ID with a bank account maintained with a bank that is not UPI 2.0 certified by the NPCI in case of Bids submitted by UPI Bidders;

22. Do not submit a Bid in case you are not eligible to acquire Equity Shares under applicable laws or your relevant constitutional documents or otherwise;

23. Do not Bid if you are not competent to contract under the Indian Contract Act, 1872 (other than minors having valid depository accounts as per Demographic Details provided by the depository);

24. Do not submit more than one Bid cum Application Form per ASBA Account;

25. Do not submit a Bid using UPI ID, if you are not a UPI Bidder;

26. Do not submit an ASBA Form with third party linked UPI ID or using a third party bank account (in case of Bids submitted by UPI Bidders);

27. In case of ASBA Bidders (other than 3 in 1 Bids) Syndicate Member(s) shall ensure that they do not upload any bids above ₹ 0.50 million.

28. Do not submit Bids to a Designated Intermediary at a location other than at the relevant Bidding Centres.

If you are UPI Bidder and are using UPI mechanism, do not submit the ASBA Form directly with SCSBs;

29. Do not submit ASBA Forms to a Designated Intermediary at a Bidding Centre unless the SCSB where the ASBA Account is maintained, as specified in the ASBA Form, has named at least one branch in the relevant Bidding Centre, for the Designated Intermediary to deposit ASBA Forms (a list of such branches is available on the website of SEBI at www.sebi.gov.in).

Further, for helpline details of the Book Running Lead Managers pursuant to the SEBI ICDR Master Circular, see “General Information – Book Running Lead Managers” on page 107.

Grounds for technical rejection In addition to the grounds for rejection of Bids on technical grounds as provided in the GID, Bidders are requested

to note that Bids maybe rejected on the following additional technical grounds:

1. Bids submitted without instruction to the SCSBs to block the entire Bid Amount;

2. Bids which do not contain details of the Bid Amount and the bank account details in the ASBA Form;

3. Bids submitted on a plain paper;

4. Bids submitted by UPI Bidders through an SCSBs and/or using a mobile application or UPI handle, not listed on the website of SEBI;

5. Bids under the UPI Mechanism submitted by UPI Bidders using third-party bank accounts or using a third-party linked bank account UPI ID (subject to availability of information regarding third-party account from Sponsor Bank(s));

6. Anchor Investors should submit Anchor Investor Application Form only to the Book Running Lead Managers;

7. Do not Bid on another Bid cum Application Form and the Anchor Investor Application Form, as the case may be, after you have submitted a Bid to any of the Designated Intermediary;

6398. ASBA Form by the UPI Bidders using third party bank accounts or using third party linked bank account UPI IDs;

9. ASBA Form submitted to a Designated Intermediary does not bear the stamp of the Designated Intermediary;

10. Bids submitted without the signature of the First Bidder or sole Bidder;

11. The ASBA Form not being signed by the account holders, if the account holder is different from the Bidder;

12. Bids by persons for whom PAN details have not been verified and whose beneficiary accounts are “suspended for credit” in terms of SEBI circular CIR/MRD/DP/ 22 /2010 dated July 29, 2010;

13. GIR number furnished instead of PAN;

14. Bids by RIIs with Bid Amount of a value of more than ₹ 0.20 million;

15. Bids by persons who are not eligible to acquire Equity Shares in terms of all applicable laws, rules, regulations, guidelines and approvals;

16. Bids accompanied by stock invest, money order, postal order, or cash; and

17. Bids uploaded by QIBs and by Non-Institutional Bidders after 4.00 pm on the Bid/Offer Closing Date and Bids by RIIs uploaded after 5.00 p.m. on the Bid/Offer Closing Date, unless extended by the Stock Exchanges. On Bid/Offer Closing Date, extension of time may be granted by Stock Exchanges only for uploading Bids received RIIs, after taking into account the total number of Bids received and as reported by the BRLMs to the Stock Exchanges.

Further, in case of any pre-Offer or post-Offer related issues regarding share certificates/ demat credit/refund orders/unblocking etc., investors can reach out to the Company Secretary and Compliance Officer. For further details of the Company Secretary and Compliance Officer, see “General Information - Company Secretary and Compliance Officer” and “Our Management - Key Managerial Personnel and Senior Management – Key Managerial Personnel” on pages 105 and 374, respectively.

In case of any delay in unblocking of amounts in the ASBA Accounts (including amounts blocked through the UPI Mechanism) exceeding two Working Days from the Bid/Offer Closing Date, the Bidder shall be compensated at a uniform rate of ₹ 100 per day for the entire duration of delay exceeding two Working Days from the Bid/Offer Closing Date by the intermediary responsible for causing such delay in unblocking. The Book Running Lead Managers shall, in their sole discretion, identify and fix the liability on such intermediary or entity responsible for such delay in unblocking. Further, SEBI has reduced the timelines for refund of Application money to four days.

Bidders shall be entitled to compensation in the manner specified in the SEBI ICDR Master Circular in case of delays in resolving investor grievances in relation to blocking/unblocking of funds.

The BRLMs shall be the nodal entity for any issues arising out of public issuance process.

For details of grounds for technical rejections of a Bid cum Application Form, please see the General Information Document.

Names of entities responsible for finalising the basis of allotment in a fair and proper manner The authorised employees of the Designated Stock Exchange, along with the BRLMs and the Registrar, shall ensure that the basis of allotment is finalised in a fair and proper manner in accordance with the procedure specified in SEBI ICDR Regulations.

Method of allotment as may be prescribed by the Securities and Exchange Board of India from time to time Our Company will not make any Allotment in excess of the Equity Shares offered through the Offer through the Offer document except in case of oversubscription for the purpose of rounding off to make Allotment, in consultation with the Designated Stock Exchange. Further, upon oversubscription, an Allotment of not more than 1% of the Offer to public may be made for the purpose of making Allotment in minimum lots.

640The Allotment of Equity Shares to Bidders other than to the Retail Individual Investors, Non-Institutional Investors and Anchor Investors shall be on a proportionate basis within the respective investor categories and the number of securities Allotted shall be rounded off to the nearest integer, subject to minimum Allotment being equal to the minimum application size as determined and disclosed.

The Allotment of Equity Shares to each Retail Individual Investor shall not be less than the minimum Bid lot, subject to the availability of shares in Retail Individual Investor category, and the remaining available shares, if any, shall be allotted on a proportionate basis in accordance with the conditions specified in the SEBI ICDR Regulations.

The Allotment to each Non-Institutional Investor shall not be less than the minimum application size, subject to the availability of Equity Shares in the Non-Institutional Portion, and the remaining Equity Shares, if any, shall be allotted on a proportionate basis, which shall be subject to the following, and in accordance with the SEBI

ICDR Regulations: (i) one-third of the Non-Institutional Portion will be available for allocation to Bidders with a Bid size of more than ₹ 0.20 million and up to ₹ 1.00 million, and (ii) two-thirds of the Non-Institutional Portion will be available for allocation to Bidders with a Bid size of more than ₹ 1.00 million, provided that under- subscription in either of these two sub-categories of Non-Institutional Portion may be allocated to Bidders in the other sub-category of Non-Institutional Portion. The allocation to each Non-Institutional Investor shall not be less than the minimum application size, subject to availability of Equity Shares in the Non-Institutional Portion and the remaining available Equity Shares, if any, shall be allocated on a proportionate basis in accordance with the conditions specified in this regard in Schedule XIII of the SEBI ICDR Regulations.

Payment into Escrow Account for Anchor Investors Our Company, in consultation with the BRLMs in their absolute discretion, decided the list of Anchor Investors to whom the CAN was sent, pursuant to which the details of the Equity Shares allocated to them in their respective names was notified to such Anchor Investors. Anchor Investors were not permitted to Bid through the ASBA process. Instead, Anchor Investors were required to transfer the Bid Amount (through direct credit, RTGS, NACH or NEFT). For Anchor Investors, the payment instruments for payment into the Escrow Accounts was required to

be drawn in favour of:

(i) in case of resident Anchor Investors: “AEQUS LIMITED ANCHOR (RESIDENT) ACCOUNT”; and

(ii) in case of non-resident Anchor Investors: “AEQUS LIMITED ANCHOR (NON-RESIDENT) ACCOUNT”.

Anchor Investors were required to note that the escrow mechanism was not prescribed by SEBI and has been established as an arrangement between our Company, the Selling Shareholders, the Syndicate, the Bankers to the Offer and the Registrar to the Offer to facilitate collections of Bid Amounts from Anchor Investors.

Undertakings by our Company

Our Company undertakes the following:

(i) that the complaints received in respect of the Offer shall be attended to by our Company expeditiously and satisfactorily;

(ii) if Allotment is not made, refunds are not made to the Bidders or listing and trading approvals are not obtained within the prescribed time period under applicable law, the entire subscription amount received will be refunded/unblocked in the ASBA Accounts within such time period as prescribed under applicable law from the Bid/Offer Closing Date or such other time as may be specified by SEBI, failing which our Company shall pay interest prescribed under the Companies Act 2013 and the SEBI ICDR Regulations for the delayed period;

(iii) that all steps will be taken for completion of the necessary formalities for listing and commencement of trading at all the Stock Exchanges where the Equity Shares are proposed to be listed within three Working Days of the Bid/Offer Closing Date or such other timeline as may be prescribed by SEBI;

(iv) that funds required for making refunds to unsuccessful Bidders as per the mode(s) disclosed shall be made available to the Registrar to the Offer by our Company;

641(v) where refunds (to the extent applicable) are made through electronic transfer of funds, a suitable communication shall be sent to the Bidder within the time prescribed under applicable law, giving details of the bank where refunds shall be credited along with amount and expected date of electronic credit of refund;

(vi) that, except for (i) allotment, if any, made to the Aequs Stock Option Plan Trust, pursuant to the ESOP Plan 2025; and (ii) the Fresh Issue (including the Pre-IPO Placement), no further issue of Equity Shares shall be made until the Equity Shares offered through the Red Herring Prospectus and this Prospectus are listed or until the Bid monies are refunded/unblocked in the ASBA Accounts on account of non- listing, under-subscription etc.;

(vii) that if our Company does not proceed with the Offer after the Bid/Offer Closing Date but prior to Allotment, the reason thereof shall be given as a public notice within two days of the Bid/Offer Closing Date. The public notice shall be issued in the same newspapers where the pre-Offer and price band advertisements were published. The Stock Exchanges on which the Equity Shares are proposed to be listed shall also be informed promptly;

(viii) that if our Company withdraws the Offer after the Bid/Offer Closing Date, our Company shall be required to file a fresh draft offer document with the SEBI, in the event our Company subsequently decides to proceed with the Offer;

(ix) that the Allotment Advice/refund confirmation to Eligible NRIs shall be dispatched within specified time;

(x) that adequate arrangements shall be made to collect all Bid cum Application Forms submitted by Bidders and Anchor Investor Application Forms from Anchor Investor; and

(xi) that our Company shall not have recourse to the Gross Proceeds until the final approval for listing and trading of the Equity Shares from all the Stock Exchanges where listing is sought has been received.

Undertakings by the Selling Shareholders Each of the Selling Shareholders, severally and not jointly, in relation to itself as a Selling Shareholder and its respective portion of the Offered Shares, undertake the following that:

(i) they are the legal and beneficial owner the Offered Shares and have a valid and marketable title and such Offered Shares have been acquired and are held by the Selling Shareholders in compliance with Applicable Law;

(ii) the Offered Shares shall be transferred pursuant to the Offer for Sale, free and clear from any encumbrances;

(iii) they shall not offer any incentive, whether direct or indirect, in any manner, whether in cash or kind or services or otherwise to any Bidder for making a Bid in the Offer and shall not make any payment, direct or indirect, in the nature of discounts, commission, allowance or otherwise to any person who makes a Bid in the Offer; and

(iv) they shall provide such reasonable cooperation to our Company and the BRLMs in relation to its respective portion of the Offered Shares for the completion of the necessary formalities for listing and commencement of trading at the Stock Exchanges;

The Selling Shareholders have authorized the Company Secretary and Compliance Officer of our Company and the Registrar to the Offer to redress any complaints received from Bidders in respect of their Offered Shares in the Offer for Sale.

Utilisation of Offer Proceeds

Our Board certifies that:

(i) all monies received out of the Fresh Issue shall be credited/transferred to a separate bank account other than the bank account referred to in sub-Section (3) of Section 40 of the Companies Act 2013;

642(ii) details of all monies utilised out of the Fresh Issue shall be disclosed, and continue to be disclosed till the time any part of the Fresh Issue proceeds remains unutilised, under an appropriate head in the balance sheet of our Company indicating the purpose for which such monies have been utilised; and

(iii) details of all unutilised monies out of the Fresh Issue, if any shall be disclosed under an appropriate separate head in the balance sheet indicating the form in which such unutilised monies have been invested.

643RESTRICTION ON FOREIGN OWNERSHIP OF INDIAN SECURITIES Foreign investment in Indian securities is regulated through the Industrial Policy, 1991 of the Government of India and FEMA. While the Industrial Policy, 1991 prescribes the limits and the conditions subject to which foreign investment can be made in different sectors of the Indian economy, FEMA regulates the precise manner in which such investment may be made. Under the Industrial Policy, 1991 unless specifically restricted, foreign investment is freely permitted in all sectors of the Indian economy up to any extent and without any prior approvals, but the foreign investor is required to follow certain prescribed procedures for making such investment. The responsibility of granting approval for foreign investment under the FDI Policy and FEMA has been entrusted to the RBI and concerned ministries / departments.

The Government of India has from time to time made policy pronouncements on FDI through press notes and press releases. The Department for Promotion of Industry and Internal Trade, Ministry of Commerce and Industry, Government of India (“DPIIT”) issued the Consolidated Foreign Direct Investment Policy dated October 15, 2020 with effect from October 15, 2020 (the “FDI Policy”), which consolidates and supersedes all previous press notes, press releases and clarifications on FDI issued by the DPIIT that were in force and effect prior to October 15, 2020. The FDI Policy will be valid until the DPIIT issues an updated circular.

The transfer of shares between an Indian resident and a non-resident does not require the prior approval of the RBI, provided that: (i) the activities of the investee company are under the automatic route under the FDI Policy and transfer does not attract the provisions of the Takeover Regulations; (ii) the non-resident shareholding is within the sectoral limits under the FDI policy; and (iii) the pricing is in accordance with the guidelines prescribed by the SEBI/RBI.

As per the FDI policy, FDI in companies in the manufacturing sector is permitted up to 100% of the paid up share capital of such company under the automatic route, subject to compliance with certain prescribed conditions.

Further, in accordance with Press Note No. 3 (2020 Series), dated April 17, 2020 issued by the DPIIT and the Foreign Exchange Management (Non-debt Instruments) Amendment Rules, 2020 which came into effect from April 22, 2020, any investment, subscription, purchase or sale of equity instruments by entities of a country which shares land border with India or where the beneficial owner of an investment into India is situated in or is a citizen of any such country (“Restricted Investors”), will require prior approval of the Government, as prescribed in the FDI Policy and the FEMA Rules. Further, in the event of transfer of ownership of any existing or future FDI in an entity in India, directly or indirectly, resulting in the beneficial ownership falling within the aforesaid restriction/ purview, such subsequent change in the beneficial ownership will also require approval of the Government. Furthermore, on April 22, 2020, the Ministry of Finance, Government of India has also made a similar amendment to the FEMA Rules. Pursuant to the Foreign Exchange Management (Non-debt Instruments) (Fourth Amendment) Rules, 2020, a multilateral bank or fund, of which India is a member, shall not be treated as an entity of a particular country nor shall any country be treated as the beneficial owner of the investments of such bank of fund in India. Each Bidder was required to seek independent legal advice about its ability to participate in the Offer. In the event such prior approval of the Government of India is required, and such approval has been obtained, the Bidder was required to intimate our Company and the Registrar to the Offer in writing about such approval along with a copy thereof within the Bid/Offer Period.

For details of the aggregate limit for investments by NRIs and FPIs in our Company, see “Offer Procedure – Bids by Eligible Non-Resident Indians” and “Offer Procedure – Bids by Foreign Portfolio Investors” on pages 628 and 629, respectively.

As per the existing policy of the Government of India, OCBs cannot participate in this Offer.

The Equity Shares offered in the Offer were not and will not be registered under the U.S. Securities Act or any state securities laws in the United States and, unless so registered, were not offered or sold within the United States, except pursuant to an exemption from, or in a transaction not subject to, the registration requirements of the U.S. Securities Act and applicable state securities laws. Accordingly, the Equity Shares are only being offered and sold (i) within the United States only to persons reasonably believed to be “qualified institutional buyers” (as defined in Rule 144A under the U.S. Securities Act and referred to in this Prospectus as “U.S. QIBs”) pursuant to Section 4(a) of the U.S. Securities Act, or (ii) outside the United States in “offshore transactions” as defined in and in compliance with Regulation S under the U.S.

Securities Act and the applicable laws of the jurisdiction where those offers and sales are made. For the avoidance of doubt, the term “U.S. QIBs” did not refer to a category of institutional investors defined under applicable Indian regulations and referred to in this Prospectus as “QIBs”. The Equity Shares were not 644and will not be registered, listed or otherwise qualified in any other jurisdiction outside India and may not be offered or sold, and Bids may not be made by persons in any such jurisdiction, except in compliance with the applicable laws of such jurisdiction.

645SECTION VIII – MAIN PROVISIONS OF THE ARTICLES OF ASSOCIATION AEQUS LIMITED (incorporated under the Companies Act, 1956) This set of Articles of Association have been approved pursuant to the provisions of Section 14 of the Companies Act, 2013 and by a special resolution passed at the Extraordinary General Meeting of Aequs Limited (the “Company”) held on May 13, 2025. These Articles have been adopted as the Articles of Association of the Company in substitution for and to the exclusion of all the existing Articles thereof.

The Articles of Association of the Company include two parts, Part A and Part B, which parts shall, unless the context otherwise requires, co-exist with each other until the commencement of the listing and trading of the equity shares of the Company (“Equity Shares”) pursuant to an initial public offering (the “IPO”) on the recognized stock exchange(s) in India (such date being the “Event”).

In case of any inconsistency or contradiction, conflict or overlap between Part A and Part B, the provisions of Part B shall prevail and be applicable until the Event. All articles of Part B shall automatically terminate and cease to have any force and effect from the Event and the provisions of Part A shall continue to be in effect and be in force, without any further corporate or other action, by the Company or by its shareholders.

PRELIMINARY The regulations contained in Table ‘F’ in Schedule I to the Companies Act, 2013 (“Table ‘F’”), as are applicable to a public company limited by shares, shall apply to the company so far as they are not inconsistent with any of the provisions contained in these regulations or modifications thereof and only to the extent that there is no specific provision in these regulations. In case of any conflict between the provisions of these articles and Table ‘F’, the provisions of these articles shall prevail.

The regulations for the management of the Company and for the observance by the members thereto and their representatives, shall, subject to any exercise of the statutory powers of the Company with reference to addition, deletion, alteration, substitution, modification, repeal and variation thereto by special resolution as prescribed or permitted by the Companies Act, 2013, as amended from time to time, be such as are contained in these Articles.

PART A DEFINITIONS AND INTERPRETATION

1. DEFINITIONS Unless the context otherwise requires, words or expressions contained in these Articles shall bear the same meaning as in the Act or any statutory modifications thereof in force at the date on which the Articles become binding on the Company. In these Articles:

“Act” or “the said Act” means the Companies Act, 2013 and the rules enacted including any statutory modification or re-enactment thereof for the time being in force and the term shall be deemed to refer to the applicable section thereof which is relatable to the relevant Article in which the said term appears in these Articles and any previous company law, so far as may be applicable;

“Alternate Director” shall have the meaning assigned to it in Article 89 of these Articles; “Annual General Meeting” means the annual general meeting of the Company convened and held in accordance with the Act;

“Applicable law(s))” includes all applicable provisions of all (i) constitutions, treaties, statutes, laws (including the common law), codes, rules, regulations, circulars, ordinances or orders of any governmental authority and SEBI, (ii) governmental approvals, (iii) orders, decisions, injunctions, judgments, awards and decrees of or agreements with any governmental authority, (iv) rules or guidelines for compliance, of any stock exchanges, (v) international treaties, conventions and protocols, and (vi) Indian GAAP or Ind-AS or any other generally accepted accounting principles.

“Articles of Association” or “Articles” mean these articles of association of the Company, as may be altered from 646time to time in accordance with the Act; “Auditors” shall mean and include those persons appointed as such for the time being by the Company.

“Beneficial Owner(s)” means the beneficial owner as defined in clause (a) of sub-section (1) of Section 2 of the Depositories Act, 1996, as amended. “Board” or “Board of Directors” means the board of directors of the Company in office at applicable times and the terms of these Articles;

“Board Meeting(s)” means a meeting of the Directors duly called, constituted and held or as the case may be, the Directors assembled at a Board, or the requisite number of Directors entitled to pass a circular resolution in accordance with these Articles and the Act;

“Company” means Aequs Limited, a company incorporated under the Companies Act, 1956; “Chairman” means the chairman/chairperson of the Board of Directors for the time being of the Company or the person elected or appointed to preside over the Board and/or General Meetings of the Company;

“Committee” means any committee of the Board of Directors of the Company formed as per the requirement of Act or for any other purpose as the Board may deem fit. “Depositories Act” means the Depositories Act, 1996, as amended and the rules framed thereunder or any statutory modification or re-enactment thereof for the time being in force;

“Depository” means a depository, as defined in clause (e) of sub-section (1) of Section 2 of the Depositories Act, 1996 and a company formed and registered under the Companies Act, 2013 and which has been granted a certificate of registration under sub-section (1A) of Section 12 of the Securities and Exchange Board of India Act, 1992;

“Director(s)” shall mean any director of the Company, including Alternate directors, Independent Directors and Nominee directors appointed in accordance with the provisions of these Articles; “Equity share capital" means shall mean the total issued and paid-up equity share capital of the Company, calculated on a fully diluted basis.

“Equity Shares” or “Shares” shall mean the issued, subscribed and fully paid-up equity shares of the Company having a face value of such amount as prescribed under the Memorandum of Association; “Extraordinary General Meeting” means an extraordinary general meeting of the Company convened and held in accordance with the Act;

“General Meeting” means any duly convened meeting of the shareholders of the Company and any adjournments thereof; “Independent Director” shall have the meaning assigned to the said term under the Act and the Applicable law(s).

“In writing” and “Written” includes printing, lithography and other modes or representing or reproducing words in a visible form; “Key Managerial Personnel” (KMP) mean such persons as defined in Section 2(51) of the Act.

“Managing Director” means a director who, by virtue of these Articles or an agreement with the Company or a resolution passed in the General Meeting, or by the Board of Directors, is entrusted with substantial powers of management of the affairs of the Company and includes a director occupying the position of managing director, by whatever name called;

“Member” or “Shareholder” means the duly registered holder from time to time, of the Shares of the Company and includes the subscribers to the Memorandum of Association and in case of Shares held by a Depository, the Beneficial Owners whose names are recorded as such with the Depository;

“Memorandum” or “Memorandum of Association” means the memorandum of association of the Company, as may be altered from time to time;

647“Office” means the registered office, for the time being, of the Company; “Officer” shall have the meaning assigned thereto by the Act; “Ordinary Resolution” as defined under section 114 of the Companies Act, 2013, means a resolution in respect of which the notice required under the Act has been duly given of the General Meeting at which such resolution is to be proposed and the votes cast (whether on a show of hands, or electronically or on a poll, as the case may be), in favour of the resolution (including the casting vote, if any, of the Chairman) by Members who, being entitled so to do, vote in person, or where proxies are allowed, by proxy or by postal ballot, exceed the votes, if any, cast against the resolution by Members so entitled and voting;

“Person” shall mean any natural person, sole proprietorship, partnership, company, body corporate, governmental authority, joint venture, trust, association or other entity (whether registered or not and whether or not having separate legal personality).

“Register” or “Register of Members” means the register of Members to be maintained pursuant to section 88 of the Act and the register of Beneficial Owners pursuant to Section 11 of the Depositories Act, 1996, in case of Shares held in a Depository;

“Seal” means the common seal of the company; “Securities” or “securities” shall mean the securities as defined in clause (h) of section 2 of the Securities Contracts (Regulation) Act, 1956. “Secretary” or “Company Secretary” means company secretary as defined in clause (c) of sub-section (1) of

section 2 of the Company Secretaries Act, 1980, as amended, who is appointed by the Company to perform the functions of a company secretary under the Act. “Special Resolution” shall have the meaning assigned thereto by the Act;

“Stock Exchange” means National Stock Exchange of India Limited, BSE Limited or such other recognized stock exchange in India or outside of India; and

2. INTERPRETATION Except where the context requires otherwise, these Articles will be interpreted as follows: a. headings are for convenience only and shall not affect the construction or interpretation of any provision of these Articles.

b. where a word or phrase is defined, other parts of speech and grammatical forms and the cognate variations of that word or phrase shall have corresponding meanings; c. words importing the singular shall include the plural and vice versa;

d. all words (whether gender-specific or gender neutral) shall be deemed to include each of the masculine, feminine and neuter genders; e. Wherever the words “include,” “includes,” or “including” is used in these Articles, such words shall be deemed to be followed by the words “without limitation”.

f. the expressions “hereof”, “herein” and similar expressions shall be construed as references to these Articles as a whole and not limited to the particular Article in which the relevant expression appears;

g. the ejusdem generis (of the same kind) rule will not apply to the interpretation of these Articles.

Accordingly, include and including will be read without limitation; h. any reference to a person includes any individual, firm, corporation, partnership, company, trust, association, joint venture, government (or agency or political subdivision thereof) or other entity of any kind, whether or not having separate legal personality. A reference to any person in these Articles shall, where the context permits, include such person’s executors, administrators, heirs, legal representatives and permitted successors and assigns;

648i. a reference to any document (including these Articles) is to that document as amended, consolidated, supplemented, novated or replaced from time to time; j. references made to any provision of the Act or the Rules shall be construed as meaning and including the references to the rules and regulations made in relation to the same by the Ministry of Corporate Affairs, Government of India.

k. the applicable provisions of the Companies Act, 1956 shall cease to have effect from the date on which the corresponding provisions under the Act have been notified. l. a reference to a statute or statutory provision includes, to the extent applicable at any relevant time:

• that statute or statutory provision as from time to time consolidated, modified, re-enacted or replaced by any other statute or statutory provision; and • any subordinate legislation or regulation made under the relevant statute or statutory provision;

m. references to writing include any mode of reproducing words in a legible and non- transitory form; n. references to Rupees, Rs., Re., INR, ₹ are references to the lawful currency of India; and o. save as aforesaid, any words or expressions defined in the Act shall, if not inconsistent with the subject or context bear the same meaning in these Articles.

SHARE CAPITAL AND VARIATION OF RIGHTS

1. PUBLIC COMPANY The Company is a public company limited by shares with the meaning of section 2(71) of the Act.

2. AUTHORISED SHARE CAPITAL The authorised share capital of the Company shall be such amount, divided into such class(es), denomination(s) and number of Shares in the Company as may from time to time be provided in Clause V of the Memorandum of Association, with power to increase or reduce such capital from time to time and power to divide share capital into other classes and to attach thereto respectively such preferential, convertible, deferred, qualified, or other special rights, privileges, conditions or restrictions and to vary, modify or abrogate the same in such manner as may be determined by or in accordance with these Articles, subject to the provisions of Applicable law(s) for the time being in force.

3. NEW CAPITAL PART OF THE EXISTING CAPITAL Except so far as otherwise provided by the conditions of issue or by these Articles, any capital raised by the creation of new Shares shall be considered as part of the existing capital, and shall be subject to the provisions herein contained, with reference to the payment of calls and installments, forfeiture, lien, surrender, transfer and transmission, voting and otherwise.

4. KINDS OF SHARE CAPITAL The Company may issue the following kinds of Shares in accordance with these Articles, the Act and other Applicable law(s): • Equity share capital: a. with voting rights; and/or b. with differential rights as to dividend, voting or otherwise in accordance with the Act; and • Preference share capital.

6495. SHARES AT THE DISPOSAL OF THE BOARD OF DIRECTORS Subject to the provisions of section 62 of the Act and these Articles, the Shares in the capital of the Company shall be under the control of the Board of Directors who may issue, allot or otherwise dispose of all or any of such Shares to such persons, in such proportion and on such terms and conditions and either at a premium or at par or at a discount (subject to compliance with the provisions of Section 52 and 53 of the Act) and at such time as they may from time to time think fit and, with the sanction of the Company in General Meeting, give to any person the option or right to call for any Shares either at par or premium during such time and for such consideration as the Board of Directors think fit, and may issue and allot Shares on payment in full or part of any property sold and transferred or for any services rendered to the Company in the conduct of its business. Any Shares so allotted may be issued as fully paid-up of partly paid-up Shares and if so issued, shall be deemed to be fully paid-up Shares. Provided that option or right to call of Shares shall not be given to any person or persons without the sanction of the Company in the General Meeting. As regards all allotments, from time to time made, the Board shall duly comply with Sections 23 and 39 of the Act, as the case may be.

6. CONSIDERATION FOR ALLOTMENT Subject to the provisions of Section 62 of the Act and these Articles the Board of Directors may issue and allot Shares of the Company as payment in full or in part, for any property purchased by the Company or in respect of goods sold or transferred or machinery or appliances supplied or for services rendered to the Company in the acquisition and/or in the conduct of its business; and any Shares which may be so allotted may be issued as fully paid up Shares and if so issued shall be deemed as fully paid up Shares.

7. SUB-DIVISION, CONSOLIDATION AND CANCELLATION OF SHARE CERTIFICATE Subject to Section 61 of the Act, the Company in its General Meetings may, by an Ordinary Resolution,

from time to time: • increase the share capital by such sum, to be divided into Shares of such amount as it thinks expedient; • divide, sub-divide or consolidate its Shares , or any of them, and the resolution whereby any share is sub-divided, may determine that as between the holders of the Shares resulting from such sub-division one or more of such Shares have some preference or special advantage in relation to dividend, capital or otherwise as compared with the others;

• cancel Shares which at the date of such General Meeting have not been taken or agreed to be taken by any person and diminish the amount of its share capital by the amount of the Shares so cancelled; • consolidate and divide all or any of its share capital into Shares of larger amount than its existing Shares; provided that any consolidation and division which results in changes in the voting percentage of Members shall require applicable approvals under the Act;

• convert all or any of its fully paid-up Shares into stock, and reconvert that stock into fully paid- up Shares of any denomination; and • The cancellation of Shares under point (c) above shall not be deemed to be a reduction of the authorised share capital.

Subject to the provisions of these Articles, the Act, other Applicable law(s) and subject to such other approvals, permissions or sanctions as may be necessary, the Company may issue any Shares with or without differential rights upon such terms and conditions and with such rights and privileges (including with regard to voting rights and dividend) as may be permitted by the Act or the Applicable law(s) or guidelines issued by the statutory authorities and/ or listing requirements and that the provisions of these Articles.

6508. FURTHER ISSUE OF SHARES

(1) Where at any time the Company proposes to increase the subscribed capital by the issue of further Shares then such Shares shall be offered, subject to the provisions of section 62 and/or 42 of the Act, as applicable and the rules notified thereunder:

(A) (i) To the persons who at the date of the offer or such other date as specified under Applicable law(s), are holders of the Equity Shares of the Company, in proportion as nearly as circumstances admit, to the paid-up share capital on those Shares by sending a letter of offer subject to the conditions mentioned in (ii) to (iv) below;

(ii) The offer aforesaid shall be made by a notice specifying the number of Shares offered and limiting a time not being less than fifteen (15) days (or such lesser number of days as may be prescribed under the Act or the rules notified thereunder, or other Applicable law(s)) and not exceeding thirty (30) days from the date of the offer, within which the offer if not accepted, shall be deemed to have been declined.

Provided that the notice shall be dispatched through registered post or speed post or through electronic mode or courier or any other mode having proof of delivery to all the existing shareholders at least three (3) days before the opening of the issue;

(iii) The offer aforesaid shall be deemed to include a right exercisable by the person concerned to renounce the Shares offered to him or any of them in favour of any other person and the notice referred to in sub-clause (ii) shall contain a statement of this right, provided that the Board may decline, without assigning any reason therefore, to allot any Shares to any Person in whose favour any Member may renounce the Shares offered to him;

(iv) After the expiry of time specified in the aforesaid notice or on receipt of earlier intimation from the person to whom such notice is given that the person declines to accept the Shares offered, the Board of Directors may dispose of them in such manner which is not disadvantageous to the Members and the Company;

(B) to employees under any scheme of employees’ stock option (“ESOP”) subject to Special Resolution passed by the shareholders of the Company and subject to the applicable rules and such other conditions, as may be prescribed under Applicable law(s); or

(C) to any person(s), if it is authorised by a Special Resolution, whether or not those persons include the persons referred to in clause (A) or clause (B) above either for cash or for a consideration other than cash, if the price of such Shares is determined by the valuation report of a registered valuer, in accordance with Applicable law(s).

(2) Nothing in sub-clause (iii) of clause (1)(A) shall be deemed:

(i) To extend the time within which the offer should be accepted; or

(ii) To authorize any person to exercise the right of renunciation for a second time on the ground that the person in whose favour the renunciation was first made has declined to take the Shares comprised in the renunciation.

(3) Nothing in this Article shall apply to the increase of the subscribed capital of the Company caused by the exercise of an option as a term attached to the debentures issued or loans raised by the Company

(i) to convert such debentures or loans into Shares in the Company; or 651Provided that the terms of issue of such debentures or the terms of such loan containing such an option have been approved before the issue of such debentures or the raising of loan by a special resolution passed by the Company in General Meeting.

(4) Notwithstanding anything contained in Article 8(3) hereof, where any debentures have been issued, or loan has been obtained from any government by the Company, and if that government considers it necessary in the public interest so to do, it may, by order, direct that such debentures or loans or any part thereof shall be converted into Shares in the Company on such terms and conditions as appear to the Government to be reasonable in the circumstances of the case even if terms of the issue of such debentures or the raising of such loans do not include a term for providing for an option for such conversion. In determining the terms and conditions of conversion, the Government shall have due regard to the financial position of the Company, the terms of issue of debentures or loans, as the case may be, the rate of interest payable on

such debentures or loans and such other matters as it may consider necessary:

Provided that where the terms and conditions of such conversion are not acceptable to the Company, it may, within sixty (60) days from the date of communication of such order, appeal to National Company Law Tribunal which shall after hearing the Company and the Government pass such order as it deems fit.

A further issue of Shares may be made in any manner whatsoever as the Board may determine including by way of preferential offer or private placement, subject to and in accordance with the Act and the rules notified thereunder.

9. RIGHT TO CONVERT LOANS INTO CAPITAL Notwithstanding anything contained in sub-clauses(s) of Article 8 above, but subject, to the provisions of the Act, the Company may increase its subscribed capital on exercise of an option attached to the debentures or loans raised by the Company to convert such debentures or loans into Shares or to subscribe for Shares in the Company.

10. ISSUE OF FURTHER SHARES NOT TO AFFECT RIGHTS OF EXISTING MEMBERS The rights conferred upon the holders of the Shares of any class issued with preferred or other rights shall not, unless otherwise expressly provided by the terms of issue of the Shares of that class, be deemed to be varied by the creation or issue of further Shares ranking pari passu therewith.

11. ALLOTMENT ON APPLICATION TO BE ACCEPTANCE OF SHARES Any application signed by or on behalf of an applicant for Shares in the Company followed by an allotment of any Shares therein, shall be an acceptance of Shares within the meaning of these Articles, and every person who thus or otherwise accepts any Shares and whose name is on the Register of Members, shall, for the purpose of these Articles, be a Member.

12. RETURN ON ALLOTMENTS TO BE MADE OR RESTRICTIONS ON ALLOTMENT The Board shall observe the restrictions as regards allotment of Shares to the public contained in the Act and other Applicable law(s), and as regards return on allotments, the Board of Directors shall comply with applicable provisions of the Act.

13. MONEY DUE ON SHARES TO BE A DEBT TO THE COMPANY The money (if any) which the Board shall, on the allotment of any Shares being made by them, require or direct to be paid by way of deposit, call or otherwise in respect of any Shares allotted by them, shall immediately on the inscription of the name of allottee in the Register as the name of the holder of such Shares , become a debt due to and recoverable by the Company from the allottee thereof, and shall be paid by him accordingly.

14. INSTALLMENTS ON SHARES If, by the conditions of allotment of any Shares, whole or part of the amount or issue price thereof shall be payable by installments, every such installment shall, when due, be paid to the Company by the person 652who, for the time being and from time to time, shall be the registered holder of the share or his legal representative.

15. MEMBERS OR HEIRS TO PAY UNPAID AMOUNTS Every Member or his heirs, executors or administrators shall pay to the Company the portion of the capital represented by his share or Shares which may, for the time being remain unpaid thereon, in such amounts, at such time or times and in such manner, as the Board shall from time to time, in accordance with these Articles require or fix for the payment thereof.

16. VARIATION OF SHAREHOLDERS’ RIGHTS If at any time the share capital of the Company is divided into different classes of Shares , the rights attached to the Shares of any class (unless otherwise provided by the terms of issue of the Shares of that class) may, subject to provisions of the Act and whether or not the Company is being wound up, be varied with the consent in writing of the holders of not less than three-fourth of the issued Shares of that class or with the sanction of a Special Resolution passed at a separate meeting of the holders of the issued Shares of that class, as prescribed by the Act.

Subject to the provisions of the Act, to every such separate meeting, the provisions of these Articles relating to meeting shall mutatis mutandis apply.

17. PREFERENCE SHARES Redeemable Preference Shares The Company, subject to the applicable provisions of the Act and the consent of the Board, shall have the power to issue on a cumulative or non-cumulative basis, preference shares liable to be redeemed in any manner permissible under the Act, and the Board of Directors may, subject to the applicable provisions of the Act, exercise such power in any manner as they deem fit and provide for redemption of such shares on such terms including the right to redeem at a premium or otherwise as they deem fit. The period of redemption of such preference Share shall not exceed the maximum period for redemption

provided under the Act.

Convertible Redeemable Preference Shares The Company, subject to the applicable provisions of the Act and the consent of the Board, shall have power to issue on a cumulative or non-cumulative basis convertible redeemable preference shares liable to be redeemed in any manner permissible under the Act and the Board of Directors may, subject to the applicable provisions of the Act, exercise such power as they deem fit and provide for redemption at a premium or otherwise and/or conversion of such Shares into such securities on such terms as they may deem fit.

Provided that the term “Preference Shares” in this Article has the same meaning as defined in explanation

(ii) to section 43 of the Act.

18. PAYMENTS OF INTEREST OUT OF CAPITAL The Company shall have the power to pay interest out of its capital on so much of the Shares which have been issued for the purpose of raising money to defray the expenses of the construction of any work or building for the Company in accordance with the Act and other Applicable law(s).

19. AMALGAMATION Subject to provisions of these Articles, the Company shall have the power to make compromise or make arrangements with creditors and Members, consolidate, demerge, amalgamate or merge with other company or companies subject to the provisions of the Act and any other Applicable law(s).

SHARE CERTIFICATES

20. RULES TO ISSUE SHARE CERTIFICATES Every person whose name is entered as a member in the register of members shall be entitled to receive 653shares in dematerialized form in accordance with Act, SEBI (Issue of Capital and Disclosure Requirements) Regulations, 2018, SEBI (Depositories and Participants) Regulations, 2018 and other Applicable law(s) for the time being in force.

Any member who subscribes to any shares of the company (whether by way of private placement or preferential issue or bonus shares or rights offer) shall ensure that all his existing shares are held in dematerialized form before such subscription.

Further, the Company shall issue the shares only in dematerialized form.

21. ISSUE OF NEW CERTIFICATE IN PLACE OF ONE DEFACED, LOST OR DESTROYED i. If any share certificate be worn out, defaced, mutilated or torn, then upon production and surrender thereof to the Company, it shall issue shares in lieu of the same in dematerialized form, and if any certificate is lost or destroyed then upon proof thereof to the satisfaction of the company and on execution of such indemnity as the Company deem adequate, shares in lieu thereof shall be given in dematerialized form.

The provisions of the foregoing Articles relating to issue of certificates shall mutatis mutandis apply to issue of certificates for any other securities including debentures (except where the Act otherwise requires) of the Company. Provided that notwithstanding what is stated above, the Board of Directors shall comply with such rules or regulation or requirements of any stock exchange or the rules notified under the Act or the rules notified under Securities Contracts (Regulation) Act, 1956 or any other act or rules applicable in this behalf.

The provision of this Article shall mutatis mutandis apply to issue of certificates for any other securities including debentures (except where the Act otherwise requires/provide option for) of the Company.

Subject to the provisions of Section 89 of the Act, a Person whose name is entered in the register of Members of the Company as the holder of the Shares but who does not hold the beneficial interest in such Shares shall file with the Company, a declaration to that effect in the form prescribed under the Act and the Company shall make necessary filings with the Registrar as may be required, within a prescribed period as set out in the Act and the rules framed thereunder.

Subject to provisions of Section 90 of the Act, every individual, who acting alone or together, or through one or more persons or trust, including a trust and Persons resident outside India, holds beneficial interests, of not less than twenty-five per cent or such other percentage as may be prescribed under the Act, in Shares of the Company or the right to exercise, or the actual exercising of significant influence or control as defined in clause (27) of Section 2 of the Act, over the Company shall make a declaration to the Company, specifying the nature of his interest and other particulars, in such manner and within such period of acquisition of the beneficial interest or rights and any change thereof. The Company shall maintain a register of the interest declared by such individuals and changes therein which shall include the name of individual, his date of birth, address, details of ownership in the Company and such other details as may be prescribed under the Act.

UNDERWRITING & BROKERAGE

22. COMMISSION FOR PLACING SHARES, DEBENTURES, ETC. a) Subject to the provisions of Section 40(6) of the Act, the rules notified thereunder, and other Applicable law(s), the Company may at any time pay a commission to any person for subscribing or agreeing to subscribe (whether absolutely or conditionally) to any Shares or debentures of the Company or underwriting or procuring or agreeing to procure subscriptions (whether absolute or conditional) for Shares or debentures of the Company and provisions of the Act shall apply.

b) The rate or amount of the commission shall not exceed the rate or amount prescribed in the Act. c) The Company may also, in any issue, pay such brokerage as may be lawful. d) The commission may be satisfied by the payment of cash or the allotment of fully or partly paid- up Shares or partly in one way and partly in the other.

654LIEN

23. COMPANY’S LIEN ON SHARES / DEBENTURES The Company shall subject to Applicable law(s) have a first and paramount lien on every share / debenture (not being a fully paid-up share / debenture) registered in the name of each Member (whether solely or jointly with others) and upon the proceeds of sale thereof for all moneys (whether presently payable or not) called, or payable at a fixed time, in respect of that share / debenture and no equitable interest in any share shall be created upon the footing and condition that this Article will have full effect and such lien shall extend to all dividends and bonuses from time to time declared in respect of such Shares /debentures. Unless otherwise agreed, the registration of transfer of Shares / debentures shall operate as a waiver of the Company’s lien, if any, on such Shares / debentures.

Provided that the Board may at any time declare any share to be wholly or in part exempt from the provisions of this Article.

The fully paid-up Shares shall be free from all lien and in the case of partly paid-up Shares the Company’s lien shall be restricted to moneys called or payable at a fixed time in respect of such Shares.

24. LIEN TO EXTEND TO DIVIDENDS, ETC.

The Company’s lien, if any, on a Shares shall extend to all dividends or interest, as the case may be, payable and bonuses declared from time to time in respect of such Shares / debentures.

25. ENFORCING LIEN BY SALE The Company may sell, in such manner as the Board thinks fit, any Shares on which the Company has a

lien:

Provided that no sale shall be made— unless a sum in respect of which the lien exists is presently payable; or until the expiration of fourteen (14) days’ after a notice in writing stating and demanding payment of such part of the amount in respect of which the lien exists as is presently payable, has been given to the registered holder for the time being of the share or to the person entitled thereto by reason of his death or insolvency or otherwise.

No Member shall exercise any voting right in respect of any Shares registered in his name on which any calls or other sums presently payable by him have not been paid, or in regard to which the Company has exercised any right of lien.

26. VALIDITY OF SALE To give effect to any such sale, the Board may authorise some person to transfer the Shares sold to the purchaser thereof. The purchaser shall be registered as the holder of the Shares comprised in any such transfer. The purchaser shall not be bound to see to the application of the purchase money, nor shall his title to the Shares be affected by any irregularity or invalidity in the proceedings with reference to the sale, and the remedy of any person aggrieved by the sale shall be in damages only and against the Company exclusively. Upon any such sale as aforesaid, the existing certificate(s) in respect of the Shares sold shall stand cancelled and become null and void and of no effect, and the Directors shall be entitled to issue a new certificate(s) in lieu thereof to the purchaser or purchasers concerned.

27. VALIDITY OF COMPANY’S RECEIPT The receipt of the Company for the consideration (if any) given for the share on the sale thereof shall (if necessary, to execution of an instrument of transfer or a transfer by relevant system, as the case maybe) constitute a good title to the share and the purchaser shall be registered as the holder of the share.

28. APPLICATION OF SALE PROCEEDS The proceeds of any such sale shall be received by the Company and applied in payment of such part of the amount in respect of which the lien exists as is presently payable and the residue, if any, shall (subject 655to a like lien for sums not presently payable as existed upon the Shares before the sale) be paid to the person entitled to the Shares at the date of the sale.

29. OUTSIDER’S LIEN NOT TO AFFECT COMPANY’S LIEN In exercising its lien, the Company shall be entitled to treat the registered holder of any share as the absolute owner thereof and accordingly shall not (except as ordered by a court of competent jurisdiction or unless required by law) be bound to recognise any equitable or other claim to, or interest in, such share on the part of any other person, whether a creditor of the registered holder or otherwise. The Company’s lien shall prevail notwithstanding that it has received notice of any such claim.

30. PROVISIONS AS TO LIEN TO APPLY MUTATIS MUTANDIS TO DEBENTURES, ETC.

The provisions of these Articles relating to lien shall mutatis mutandis apply to any other securities, including debentures, of the Company.

CALLS ON SHARES

31. BOARD TO HAVE RIGHT TO MAKE CALLS ON SHARES The Board may subject to the provisions of the Act and any other Applicable law(s), from time to time, make such call as it thinks fit upon the Members in respect of all moneys unpaid on the Shares (whether on account of the nominal value of the Shares or by premium) and not by the conditions of allotment thereof made payable at fixed times. Provided that no call shall exceed one-fourth of the nominal value of the share or be payable at less than one (1) month from the date fixed for the payment of the last preceding call. A call may be revoked or postponed at the discretion of the Board. The power to call on Shares shall not be delegated to any other person except with the approval of the shareholders in a General Meeting and as maybe permitted by law.

32. NOTICE FOR CALL Each Member shall, subject to receiving at least fourteen (14) days’ notice specifying the time or times and place of payment, pay to the Company, at the time or times and place so specified, the amount called on his Shares.

The Board may, from time to time, at its discretion, extend the time fixed for the payment of any call, in respect of one (1) or more Members, as the Board may deem appropriate in any circumstances.

33. CALL WHEN MADE The Board of Directors may, when making a call by resolution, determine the date on which such call shall be deemed to have been made, not being earlier than the date of resolution making such call, and thereupon the call shall be deemed to have been made on the date so determined and if no such date is so determined a call shall be deemed to have been made at the date when the resolution authorizing such call was passed at the meeting of the Board and may be required to be paid in installments.

34. LIABILITY OF JOINT HOLDERS FOR A CALL The joint holders of a share shall be jointly and severally liable to pay all calls in respect thereof.

35. CALLS TO CARRY INTEREST If a Member fails to pay any call due from him on the day appointed for payment thereof, or any such extension thereof as aforesaid, he shall be liable to pay interest on the same from the day appointed for the payment thereof to the time of actual payment at 10% (ten per cent) per annum or at such lower rate, if any as the Board may determine. The Board shall be at liberty to waive payment of any such interest wholly or in part.

36. DUES DEEMED TO BE CALLS Any sum which by the terms of issue of a share becomes payable on allotment or at any fixed date, whether on account of the nominal value of the share or by way of premium, shall, for the purposes of these Articles, be deemed to be a call duly made and payable on the date on which by the terms of issue 656such sum becomes payable.

37. EFFECT OF NON-PAYMENT OF SUMS In case of non-payment of such sum, all the relevant provisions of these Articles as to payment of interest and expenses, forfeiture or otherwise shall apply as if such sum had become payable by virtue of a call duly made and notified.

38. PAYMENT IN ANTICIPATION OF CALL MAY CARRY INTEREST The Board – may, subject to provisions of the Act, if it thinks fit, subject to the provisions of Section 50 of the Act, agree to and receive from any Member willing to advance the same, all or any part of the monies uncalled and unpaid upon any Shares held by him;

• upon all or any of the monies so advanced, may (until the same would, but for such advance, become presently payable) pay interest at such rate as may be agreed upon between the Board and the Member paying the sum in advance. Nothing contained in this Article shall confer on the Member (i) any right to participate in profits or dividends; or (ii) any voting rights in respect of the moneys so paid by him, until the same would, but for such payment, become presently payable by him.

• The Directors may at any time repay the amount so advanced.

The Members shall not be entitled to any voting rights in respect of the money so paid by him until the same would but for such payment, become presently payable.

The provisions of these Articles shall mutatis mutandis apply to the calls on to any other securities, including debentures of the company.

39. PROVISIONS AS TO CALLS TO APPLY MUTATIS MUTANDIS TO DEBENTURES, ETC.

The provisions of these Articles relating to calls shall mutatis mutandis apply to any other securities, including debentures, of the Company, to the extent applicable.

FORFEITURE OF SHARES

40. BOARD TO HAVE A RIGHT TO FORFEIT SHARES If a Member fails to pay the whole or any part of any call, or installment of a call or any money due in respect of any share on the day appointed for payment thereof, the Board may, at any time thereafter during such time as any part of the call or installment remains unpaid or a judgment or decree in respect thereof remains unsatisfied in whole or in part, serve a notice on him requiring payment of so much of the call or installment or other money as is unpaid, together with any interest which may have accrued and all expenses that may have been incurred by the Company by reason of non-payment.

41. NOTICE FOR FORFEITURE OF SHARES

The notice aforesaid shall: name a further day (not being earlier than the expiry of fourteen (14) days from the date of service of the notice) on or before which the payment required by the notice is to be made; and • state that, in the event of non-payment on or before the day so named, the Shares in respect of which the call was made shall be liable to be forfeited.

If the requirements of any such notice as aforesaid are not complied with, any share in respect of which the notice has been given may, at any time thereafter, before the payment required by the notice has been made, be forfeited by a resolution of the Board to that effect.

65742. RECEIPT OF PART AMOUNT OR GRANT OF INDULGENCE NOT TO AFFECT FORFEITURE Neither a judgment nor a decree in favour of the Company for calls or other moneys due in respect of any Shares nor any part payment or satisfaction thereof nor the receipt by the Company of a portion of any money which shall from time to time be due from any Member in respect of any Shares either by way of principal or interest nor any indulgence granted by the Company in respect of payment of any such money shall preclude the forfeiture of such Shares as herein provided. There shall be no forfeiture of unclaimed dividends before the claim becomes barred by Applicable law(s).

43. FORFEITED SHARE TO BE THE PROPERTY OF THE COMPANY Any share forfeited in accordance with these Articles, shall be deemed to be the property of the Company and may be sold, re-allocated or otherwise disposed of either to the original holder thereof or to any other person upon such terms and in such manner as the Board thinks fit.

44. ENTRY OF FORFEITURE IN REGISTER OF MEMBERS When any share shall have been so forfeited, notice of the forfeiture shall be given to the defaulting Member and any entry of the forfeiture with the date thereof, shall forthwith be made in the Register of Members but no forfeiture shall be invalidated by any omission or neglect or any failure to give such notice or make such entry as aforesaid.

45. MEMBER TO BE LIABLE EVEN AFTER FORFEITURE A person whose Shares have been forfeited shall cease to be a Member in respect of the forfeited Shares, but shall, notwithstanding the forfeiture, remain liable to pay, and shall pay, to the Company all monies which, at the date of forfeiture, were presently payable by him to the Company in respect of the Shares.

All such monies payable shall be paid together with interest thereon at such rate as the Board may determine, from the time of forfeiture until payment or realization. The Board may, if it thinks fit, but without being under any obligation to do so, enforce the payment of the whole or any portion of the monies due, without any allowance for the value of the Shares at the time of forfeiture or waive payment in whole or in part. The liability of such person shall cease if and when the Company shall have received payment in full of all such monies in respect of the Shares.

46. EFFECT OF FORFEITURE The forfeiture of a share shall involve extinction at the time of forfeiture, of all interest in and all claims and demands against the Company, in respect of the share and all other rights incidental to the share, except only such of those rights as by these Articles expressly saved.

47. CERTIFICATE OF FORFEITURE A duly verified declaration in writing that the declarant is a director, the manager or the secretary of the Company, and that a share in the Company has been duly forfeited on a date stated in the declaration, shall be conclusive evidence of the facts therein stated as against all persons claiming to be entitled to the share.

48. TITLE OF PURCHASER AND TRANSFEREE OF FORFEITED SHARES The Company may receive the consideration, if any, given for the share on any sale, re- allotment or disposal thereof and may execute a transfer of the share in favour of the person to whom the share is sold or disposed of. The transferee shall thereupon be registered as the holder of the share and the transferee shall not be bound to see to the application of the purchase money, if any, nor shall his title to the share be affected by any irregularity or invalidity in the proceedings in reference to the forfeiture, sale, re- allotment or disposal of the share.

49. VALIDITY OF SALES Upon any sale after forfeiture or for enforcing a lien in exercise of the powers hereinabove given, the Board may, if necessary, appoint some person to execute an instrument for transfer of the Shares sold and cause the purchaser’s name to be entered in the Register of Members in respect of the Shares sold 658and after his name has been entered in the Register of Members in respect of such Shares the validity of the sale shall not be impeached by any person.

50. CANCELLATION OF SHARES IN RESPECT OF FORFEITURE Upon any sale, re-allotment or other disposal under the provisions of the preceding Articles, the shares held in demat mode shall be forfeited and stand cancelled and become null and void and be of no effect, and the Board shall be entitled to issue shares in respect of the said Shares to the person(s) entitled thereto.

51. BOARD ENTITLED TO CANCEL FORFEITURE The Board may at any time before any share so forfeited shall have them sold, reallotted or otherwise disposed of, cancel the forfeiture thereof upon such conditions as it thinks fit.

52. SUMS DEEMED TO BE CALLS The provisions of these Articles as to forfeiture shall apply in the case of non-payment of any sum which, by the terms of issue of a share, becomes payable at a fixed time, whether on account of the nominal value of the share or by way of premium, as if the same had been payable by virtue of a call duly made and notified.

53. PROVISIONS AS TO FORFEITURE OF SHARES TO APPLY MUTATIS MUTANDIS TO DEBENTURES, ETC.

The provisions of these Articles relating to forfeiture of Shares shall mutatis mutandis apply to any other securities, including debentures, of the Company.

54. TRANSFER AND TRANSMISSION OF SHARES i) Transfer of shares in demat mode: a) Every holder of shares of the company who intends to transfer such shares shall get such shares dematerialized before the transfer.

b) The transferor shall be deemed to remain a holder of the share until the name of the transferee is entered as beneficial owners in the records of the Depository. c) The Depository participant shall register transfer of shares to or from a beneficial owner’s account only on receipt of instructions and requisite documents, if any are received from the beneficial owner and thereafter confirm the same to the beneficial owner in a manner as specified by the depository in its bye-laws.

Provided further that nothing in this Article shall be prejudicially to any power of the Company to register as shareholder or debenture holder any person to whom the right to any shares in, or debentures of, the Company has been transmitted by operation of law.

Provided further that the instrument of transfer of any Shares shall be in such form as may be prescribed under the Act and in writing, and all the applicable provisions of the Act for the time being in force shall be duly complied with, in respect of all transfers of Shares and the registrations thereof.

ii) Transfer by legal representative: A transfer of the shares or other interest in the Company of a deceased member thereof made by his legal representatives shall, although the legal representative is not himself a member be as valid as if he had been a member at the time of the transfer of shares in dematerialized form.

iii) Power to close Registers: The Company may, after giving appropriate previous notice of not less than seven days’ close the register of members or the register of debenture holders or other security holders for any period or periods not exceeding in the whole forty-five days in each year, but not exceeding thirty days at any one time.

iv) The provisions of these Articles relating to transfer of shares shall mutatis mutandis apply to 659any other securities including debentures of the Company. v) Subject to the provisions of sections 56, 58 and 59 of the Act and section 22A of the Securities Contracts (Regulation) Act, 1956, the Directors may, whether in pursuance of any power of the Company under these Articles or otherwise, decline to register or acknowledge any transfer of shares whether fully paid or not and the right of refusal, shall not be affected by the circumstances that the proposed transferee is already a Member of the Company but in such cases, the Directors shall within one month from the date on which the instrument of transfer was lodged with the Company, send to the transferee and transferor notice of the refusal to register such transfer provided that registration of transfer shall not be refused on the ground of the transferor being either alone or jointly with any other person or persons indebted to the Company on any account whatsoever. Transfer of shares/debentures in whatever lot shall not be refused.

vi) Registration of transfer shall not be refused on the ground of transferor being either alone or jointly with any other person or persons indebted to Company on any account whatsoever, except where the Company has a lien on Shares.

55. TRANSMISSION OF SHARES

Title to shares on death of a member: i. On the death of a member, the survivor or survivors where the member was a joint holder, and his nominee or nominees or legal representatives where he was a sole holder, shall be the only persons recognized by the company as having any title to his interest in the shares.

ii. Nothing in clause (i) shall release the estate of a deceased joint holder from any liability in respect of any share which had been jointly held by him with other persons.

Transmission Clause: i. Any person becoming entitled to a share in consequence of the death or insolvency of a member may, upon such evidence being produced as may from time to time properly be required by the Board and subject as hereinafter provided, elect, either— a. to be registered himself as holder of the share; or b. to make such transfer of the share as the deceased or insolvent member could have made.

ii. The Board shall, in either case, have the same right to decline or suspend registration as it would have had, if the deceased or insolvent member had transferred the share before his death or insolvency.

Indemnity to the Company: The Company shall be fully indemnified by such person from all liability, if any, for actions taken by the Board to give effect to such transmission.

Right to election of holder of share: i. If the person so becoming entitled shall elect to be registered as holder of the share himself, he shall deliver or send to the Company a notice in writing signed by him stating that he so elects.

ii. If the person aforesaid shall elect to transfer the share, he shall testify his election by executing necessary documents for transfer of the share. iii. All the limitations, restrictions and provisions of these regulations relating to the right to transfer of shares shall be applicable to any such notice or transfer as aforesaid as if the death or insolvency of the member had not occurred and the notice or transfer were a transfer signed by that member.

Claimant to be entitled to same advantage:

A person becoming entitled to a share by reason of the death or insolvency of the holder shall be entitled to the same dividends and other advantages to which he would be entitled if he were the registered holder 660of the share, except that he shall not, before being registered as a member in respect of the share, be entitled in respect of it to exercise any right conferred by membership in relation to meetings of the

Company:

Provided that the Board may, at any time, give notice requiring any such person to elect either to be registered himself or to transfer the share, and if the notice is not complied with within ninety days, the Board may thereafter withhold payment of all dividends, bonuses or other monies payable in respect of the share, until the requirements of the notice have been complied with.

The provisions of these Articles relating to transmission by operation of law shall mutatis mutandis apply to any other securities including debentures of the Company.

No fee shall be charged for registration of transfer, transmission, probate, succession certificate and letters of administration, certificate of death or marriage, power of attorney or similar other document.

56. COMPANY NOT LIABLE TO NOTICE OF EQUITABLE RIGHTS The Company shall incur no liability or responsibility whatever in consequence of its registering or giving effect to any transfer of shares made or purporting to be made by any apparent legal owner thereof (as shown or appearing in the Register) to the prejudice of persons having or claiming any equitable rights, title or interest in the said shares, notwithstanding that the Company may have had notice of such equitable rights referred thereto in any books of the Company and the Company shall not be bound by or required to regard or attend to or give effect to any notice which may be given to it of any equitable rights, title or interest or be under any liability whatsoever for refusing or neglecting to do so, though it may have been entered or referred to in some book of the Company but the Company shall nevertheless be at liberty to regard and attend to any such notice and give effect thereto if the Board shall so think fit.

57. TRANSFER AND TRANSMISSION OF DEBENTURES The provisions of these Articles, shall, mutatis mutandis, apply to the transfer of or the transmission by law of the right to any securities including, debentures of the Company, if any.

58. RIGHTS TO ISSUE SHARE WARRANTS The Company may issue share warrants subject to, and in accordance with provisions of the Act. The Board may, in its discretion, with respect to any share which is fully paid-up on application in writing signed by the person registered as holder of the share, and authenticated by such evidence (if any) as the Board may from time to time require as to the identity of the person signing the application, and the amount of the stamp duty on the warrant and such fee as the Board may from time to time require having been paid, issue a warrant.

59. BOARD TO MAKE RULES The Board may, from time to time, make rules as to the terms on which it shall think fit, a new share warrant or coupon may be issued by way of renewal in case of defacement, loss or destruction.

60. SHARES MAY BE CONVERTED INTO STOCK

Where Shares are converted into stock: • the holders of stock may transfer the same or any part thereof in the same manner as, and subject to the same Articles under which, the Shares from which the stock arose might before the conversion have been transferred, or as near thereto as circumstances admit:

Provided that the Board may, from time to time, fix the minimum amount of stock transferable, so, however, that such minimum shall not exceed the nominal amount of the Shares from which the stock arose;

• the holders of stock shall, according to the amount of stock held by them, have the same rights, privileges and advantages as regards dividends, voting at meetings of the Company, and other matters, as if they held the Shares from which the stock arose; but no such privilege or advantage (except participation in the dividends and profits of the Company and in the assets on winding 661up) shall be conferred by an amount of stock which would not, if existing in Shares , have conferred that privilege or advantage;

• such of the Articles of the Company as are applicable to paid-up Shares shall apply to stock and the words “share” and “shareholder”/“Member” shall include “stock” and “stock-holder” respectively.

61. REDUCTION OF CAPITAL The Company may (subject to the provisions of sections 52, 55, 66, both inclusive, and other applicable provisions, if any, of the Act), by a Special Resolution as prescribed by the Act, reduce in any manner and in accordance with the provisions of the Act— • its share capital; and/or • any capital redemption reserve account; and/or • any share premium account and, in particular, without prejudice to the generality of the foregoing power may by: (i) extinguishing or reducing the liability on any of its Shares in respect of share capital not paid-up; (ii) either with or without extinguishing or reducing liability on any of its Shares,(a) cancel paid-up share capital which is lost or is unrepresented by available assets; or (b) pay off any paid-up share capital which is in excess of the wants of the Company; and may, if and so far as is necessary, alter its Memorandum, by reducing the amount of its share capital and of its Shares accordingly.

62. DEMATERIALISATION OF SECURITIES • The Company shall recognize interest in dematerialised securities under the Depositories Act,

1996.

Subject to the provisions of the Act, either the Company or the investor may exercise an option to issue (in case of the Company only), deal in, hold the securities (including Shares ) with a Depository in electronic form and the certificates in respect thereof shall be dematerialized, in which event, the rights and obligations of the parties concerned and matters connected therewith or incidental thereof shall be governed by the provisions of the Depositories Act, 1996 as amended from time to time or any statutory modification(s) thereto or re-enactment thereof, the Securities and Exchange Board of India (Depositories and Participants) Regulations, 2018 and other Applicable law(s).

• Dematerialisation/Re-materialisation of securities Notwithstanding anything to the contrary or inconsistent contained in these Articles, the Company shall be entitled to dematerialise its existing securities, re-materialise its securities held in Depositories and/or offer its fresh securities in the dematerialised form pursuant to the Depositories Act, 1996 and the rules framed thereunder, if any.

• Option to receive security certificate or hold securities with the Depository.

Every person subscribing to or holding securities of the Company shall have the option to receive the security certificate or hold securities with a Depository. Where a person opts to hold a security with the Depository, the Company shall intimate such Depository of the details of allotment of the security and on receipt of such information, the Depository shall enter in its Record, the name of the allottees as the Beneficial Owner of that Security.

• Securities in electronic form All securities held by a Depository shall be dematerialized and held in electronic form. No certificate shall be issued for the securities held by the Depository. • Depository shall be in a fungible form:

All Shares held by a Depository shall be dematerialized and shall be in a fungible form.

662a. Notwithstanding anything to the contrary contained in the Act or the Articles, a depository shall be deemed to be the registered owner for the purposes of effecting any transfer of ownership of Shares on behalf of the beneficial owner.

b. Save as otherwise provided in (i) above, the depository as the registered owner of the Shares shall not have any voting rights or any other rights in respect of Shares held by it. • Beneficial owner deemed as absolute owner Except as ordered by a court of competent jurisdiction or by Applicable law(s) required and subject to the provisions of the Act, the Company shall be entitled to treat the person whose name appears on the applicable register as the holder of any security or whose name appears as the Beneficial Owner of any security in the records of the Depository as the absolute owner thereof and accordingly shall not be bound to recognize any benami trust or equity, equitable contingent, future, partial interest, other claim to or interest in respect of such securities or (except only as by these Articles otherwise expressly provided) any right in respect of a security other than an absolute right thereto in accordance with these Articles, on the part of any other person whether or not it has expressed or implied notice thereof but the Board shall at their sole discretion register any security in the joint names of any two or more persons or the survivor or survivors of them. Moreover, the Beneficial Owner of the Shares shall be entitled to all the liabilities in respect of his Shares which are held by a Depository.

• Register and index of Beneficial Owners The Company shall cause to be kept a register and index of Members with details of securities held in materialised and dematerialised forms in any media as may be permitted by law including any form of electronic media in accordance with all applicable provisions of the Act and the Depositories Act, 1996 with details of Shares held in physical and dematerialised forms in any medium as may be permitted by law including in any form of electronic medium.

Notwithstanding anything in the Act or the Articles to the contrary, where Shares are held in a Depository, the records of the beneficial ownership may be served by such Depository on the Company by means of electronic mode or by delivery of disks, drives or any other mode as prescribed by Law from time to time. The register and index of Beneficial Owners maintained by a Depository under the Depositories Act, 1996 shall be deemed to be a register and index of Members for the purposes of this Act. The Company shall have the power to keep in any country outside India, a Register of Members, of members resident in that country.

The Company shall not be required to maintain register of transfers for entering particulars of transfers and transmissions of Shares or other securities in dematerialized form.

63. BUY BACK OF SHARES Notwithstanding anything contained in these Articles, but subject to the provisions of Section 68 to 70 and other applicable provisions of the Act and the rules and regulations prescribed in this connection or any other law for the time being in force, the Company may purchase its own Shares or other specified securities.

64. ISSUE OF SWEAT EQUITY SHARES Subject to the terms and conditions prescribed in Section 54 of the Act and the rules and regulations prescribed in this connection, the Board of Directors may offer, issue and allot Shares in the Capital of the Company as sweat equity shares.

65. ISSUE OF EQUITY SHARES UNDER EMPLOYEE STOCK OPTIONS SCHEMES.

Subject to the terms and conditions prescribed in Section 62 of the Act and under (Share Based Employee Benefits and Sweat Equity) Regulations, 2021 prescribed in this connection, the Board of Directors may offer, issue and allot Shares in the Capital of the Company under employee stock options schemes of the Company from time to time.

GENERAL MEETINGS

66. ANNUAL GENERAL MEETINGS 663• The Company shall in each year hold a General Meeting as its Annual General Meeting in addition to any other meeting in that year. • An Annual General Meeting of the Company shall be held in accordance with the provisions of the Act and other Applicable law(s).

• Not more than 15 (fifteen) months shall elapse between the date of one Annual General Meeting of the Company and that of the next. Nothing contained in the foregoing provisions shall be taken as affecting the right conferred upon the Registrar under the provisions of Section 96 of the Act to extend the time within which any Annual General Meeting may be held. Every Annual General Meeting shall be called during business hours on a day that is not a national holiday (declared as such by the Central Government) and shall be held either at the registered office or at some other place within the city in which the registered office of the Company is situated, as the Board may determine. Every Member of the Company shall be entitled to attend every General Meeting either in person or by proxy.

• The Company shall cause minutes of the proceedings of every General Meeting and every resolution passed by postal ballot and every meeting of its Board of Directors or of every committee of the Board, to be prepared and signed in a manner as prescribed under the Act and kept within thirty days of the conclusion of every such meeting concerned, or passing of resolution by postal ballot in books kept for that purpose with their pages consecutively numbered.

67. INSPECTION OF MINUTE BOOKS OF GENERAL MEETING The books containing the minutes shall be open to inspection by any Member in accordance with section 119 of the Act.

68. EXTRAORDINARY GENERAL MEETINGS All General Meetings other than the Annual General Meeting shall be called “Extraordinary General Meeting”. Provided that, the Board may, whenever it thinks fit, call an Extraordinary General Meeting.

69. EXTRAORDINARY MEETINGS ON REQUISITION The Board shall, on the requisition of Members, convene an Extraordinary General Meeting of the Company in the circumstances and in the manner provided under the Act.

The Board shall on the requisition of such number of Member or Members of the Company as is specified in Section 100 of the Act, forthwith proceed to call an extra-ordinary General Meeting of the Company and in respect of any such requisition and of any meeting to be called pursuant thereto, all other provisions of Section 100 of the Act shall for the time being apply.

Notice of every General Meeting shall be given to the Members and to such other Person or Persons as required by and in accordance with Section 101 and 102 of the Act and it shall be served in the manner authorized by Section 20 of the Act.

Any accidental omission to give notice to, or the non-receipt of such notice by, any Member or other Person who is entitled to such notice for any meeting shall not invalidate the proceedings of the meeting.

Subject to the provisions contained under Section 115 of the Act, where, by any provision contained in the Act or in these Articles, special notice is required of any resolution, notice of the intention to move such resolution shall be given to the Company by such number of Members holding not less than one per cent of total voting power or holding Shares on which such aggregate sum not exceeding five lakh rupees, has been paid-up and the Company shall immediately after receipt of the notice, give its members notice of the resolution at least 7 (seven) days before the meeting, exclusive of the day of dispatch of notice and day of the meeting, in the same manner as it gives notice of any General Meetings.

70. NOTICE FOR GENERAL MEETINGS All General Meetings shall be convened by giving not less than clear twenty one (21) days’ notice, in such manner as is prescribed under the Act, specifying the place, date and hour of the meeting and a statement of the business proposed to be transacted at such a meeting, in the manner mentioned in the Act.

664All notices of, and other communications relating to, any General Meeting shall be forwarded to the auditor of the Company, and the auditor shall, unless otherwise exempted by the Company, attend either by himself or through his authorised representative, who shall also be qualified to be an auditor, any General meeting and shall have right to be heard at such meeting on any part of the business which concerns him as the auditor.

Any accidental omission to give notice to or non-receipt of the notice by any Member or other person to whom it should be given shall not invalidate the proceedings of any General Meetings.

71. SHORTER NOTICE ADMISSIBLE Upon compliance with the relevant provisions of the Act, any General Meeting may be convened by giving a shorter notice less than twenty one (21) days (a) if consent is given in writing or by electronic mode by not less than 95 (ninety five) percent of the Shareholders entitled to vote at that meeting in case of Annual General Meeting and (b) if consent is given in writing or by electronic mode by majority in number of Members entitled to vote and who represent not less than 95 (ninety-five) per cent. of such part of the paid-up share capital of the Company as gives a right to vote at the meeting, in case of any other General Meeting.

72. CIRCULATION OF MEMBERS’ RESOLUTION The Company shall comply with provisions of Section 111 of the Act, as to giving notice of resolutions and circulating statements on the requisition of Members.

73. SPECIAL AND ORDINARY BUSINESS • Subject to the provisions of the Act, all business shall be deemed special that is transacted at the Annual General Meeting with the exception of declaration of any dividend, the consideration of financial statements and reports of the Board of Directors and Auditors, the appointment of Directors in place of those retiring and the appointment of and fixing of the remuneration of the Auditors. In case of any other meeting, all business shall be deemed to be special. Where any item of business refers to any document, which is to be considered at the meeting, the time and place where such document can be inspected shall be specified in the statement required to be annexed to the notice calling such meeting.

• In case of special business as aforesaid, an explanatory statement as required under the applicable provisions of the Act shall be annexed to the notice of the meeting.

74. QUORUM FOR GENERAL MEETING Five (5) Members or such other number of Members as required under the Act or the Applicable law(s) for the time being in force prescribes, personally present shall be quorum for a General Meeting and no business shall be transacted at any General Meeting unless the requisite quorum is present at the commencement of the meeting.

75. TIME FOR QUORUM AND ADJOURNMENT Subject to the provisions of the Act, if within half an hour from the time appointed for a meeting, a quorum is not present, the meeting, if called upon at the requisition of Members, shall be cancelled and in any other case, it shall stand adjourned to the same day in the next week (not being a national holiday) at the same time and place or to such other day and at such other time and place as the Board of Directors may determine. If at the adjourned meeting also, quorum is not present within half an hour from the time appointed for the meeting, the Members present shall be quorum and may transact the business for which the meeting was called.

76. CHAIRMAN OF GENERAL MEETING The Chairman, if any, of the Board of Directors shall preside as Chairman at every General Meeting of the Company. No business shall be discussed at any General Meeting except the election of a Chairman while the Chair is vacant.

77. ELECTION OF CHAIRMAN 665Subject to the provisions of the Act, if there is no such chairman or if at any meeting he is not present within fifteen (15) minutes after the time appointed for holding the meeting or is unwilling to act as Chairman, the Board of Directors present shall elect another Director as Chairman and if no Director is present or if all the Directors decline to take the chair, then the Members present shall choose a Member to be the Chairman. If a poll is demanded on the election of the Chairperson, it shall be taken forthwith in accordance with the provisions of the Act and the Chairperson elected on show of hands shall exercise all the powers of the Chairperson under the said provisions. If some other person is elected Chairperson as a result of the poll, he shall be the Chairperson for the rest of the meeting.

78. ADJOURNMENT OF MEETING Subject to the provisions of the Act, the Chairman of a General Meeting may, with the consent given in the meeting at which a quorum is present (and shall if so directed by the meeting) adjourn that meeting from time to time and from place to place, but no business shall be transacted at any adjourned meeting other than the business left unfinished at the meeting from which the adjournment took place. When the meeting is adjourned for thirty (30) days or more, notice of the adjourned meeting shall be given as nearly to the original meeting, as may be possible. Save as aforesaid and as provided in the Act, it shall not be necessary to give any notice of adjournment of the business to be transacted at an adjourned meeting.

In case of an adjourned meeting or of a change of day, time or place of meeting, the Company shall give not less than 3 (three) days’ notice to the Members either individually or by publishing an advertisement in the newspapers (one in English and one in vernacular language) which is in circulation at the place where the registered office of the Company is situated.

The required quorum at any adjourned General Meeting shall be the same as that required at the original General Meeting.

Any member who has not appointed a proxy to attend and vote on his behalf at a General Meeting may appoint a proxy for any adjourned General Meeting, not later than forty-eight hours before the time of such adjourned Meeting.

79. VOTING AT MEETING At any General Meeting, a demand for a poll shall not prevent the continuance of a meeting for the transaction of any business other than that on which a poll has been demanded. The demand for a poll may be withdrawn at any time by the person or persons who made the demand. Further, no objection shall be raised to the qualification of any voter except at the General Meeting or adjourned General Meeting at which the vote objected to is given or tendered, and every vote not disallowed at such meeting shall be valid for all purposes.

Any such objection made in due time shall be referred to the chairperson of the General Meeting, whose decision shall be final and conclusive.

80. DECISION BY POLL If a poll is duly demanded in accordance with the provisions of the Act, it shall be taken in such manner as the Chairman directs and the results of the poll shall be deemed to be the decision of the meeting on the resolution in respect of which the poll was demanded.

81. CASTING VOTE OF CHAIRMAN In case of equal votes, whether on a show of hands or on a poll, the Chairman of the General Meeting at which the show of hands takes place or at which the poll is demanded shall be entitled to a second or casting vote in addition to the vote or votes to which he may be entitled to as a Member.

82. PASSING RESOLUTIONS BY POSTAL BALLOT • Notwithstanding any of the provisions of these Articles, the Company may, and in the case of resolutions relating to such business as notified under the Act, to be passed by postal ballot, shall get any resolution passed by means of a postal ballot, instead of transacting the business in the General Meeting of the Company.

666• The Company shall, in respect of such items of business as the Central Government may, by

notification, declare or which are under any other Applicable law required to be transacted only by means of postal ballot. • Where the Company decides to pass any resolution by resorting to postal ballot, it shall follow the procedures as prescribed under the Act.

• If a resolution is assented to by the requisite majority of the shareholders by means of postal ballot, it shall be deemed to have been duly passed at a General Meeting convened in that behalf.

Directors may attend and speak at General Meetings, whether or not they are Shareholders.

And a body corporate being a Member shall be deemed to be personally present if it is represented in accordance with Section 113 of the Act and the Articles.

VOTE OF MEMBERS

83. VOTING RIGHTS OF MEMBERS

Subject to any rights or restrictions for the time being attached to any class or classes of Shares: • On a show of hands every Member holding Equity Shares and present in person shall have one vote. • On a poll, every Member holding Equity Shares shall have voting rights in proportion to his share in the paid-up equity share capital.

• A Member may exercise his vote at a meeting by electronic means in accordance with the Act and shall vote only once.

84. VOTING BY JOINT-HOLDERS In case of joint holders, the vote of first named of such joint holders in the Register of Members who tender a vote whether in person or by proxy shall be accepted, to the exclusion of the votes of other joint holders.

85. VOTING BY MEMBER OF UNSOUND MIND AND MINOR.

A Member of unsound mind, or in respect of whom an order has been made by any court having jurisdiction in lunacy, may vote, whether on a show of hands or on a poll, by his committee or other legal guardian, and any such committee or legal guardian may, on a poll, vote by proxy.

If any member be a minor, the vote in respect of his share or shares shall be by his guardian or any one of his guardians.

86. NO RIGHT TO VOTE UNLESS CALLS ARE PAID No Member shall be entitled to vote at any General Meeting unless all calls or other sums presently payable by such Member have been paid, or in regard to which the Company has lien and has exercised any right of lien.

87. PROXY Subject to the provisions of the Act and these Articles, any Member entitled to attend and vote at a General Meeting may do so either personally or through his constituted attorney or through another person as a proxy on his behalf, for that meeting. The proxy shall not be entitled to vote except on a poll.

88. INSTRUMENT OF PROXY An instrument appointing a proxy shall be in the form as prescribed under Section 105 of the Act for this purpose. The instrument appointing a proxy shall be in writing under the hand of appointer or of his attorney duly authorized in writing or if appointed by a body corporate either under its common seal or under the hand of its officer or attorney duly authorized in writing by it. Any person whether or not he is a Member of the Company may be appointed as a proxy.

667The instrument appointing a proxy and power of attorney or other authority (if any) under which it is signed or a notarized copy of that power or authority must be deposited at the Office of the Company not less than forty eight (48) hours prior to the time fixed for holding the meeting or adjourned meeting at which the person named in the instrument proposes to vote, or, in case of a poll, not less than twenty four

(24) hours before the time appointed for the taking of the poll, and in default the instrument of proxy shall not be treated as valid.

89. VALIDITY OF PROXY A vote given in accordance with the terms of an instrument of proxy shall be valid, notwithstanding the previous death or insanity of the principal or the revocation of the proxy or of the authority under which the proxy was executed, or the transfer of Shares in respect of which the proxy is given, provided that no intimation in writing of such death, insanity, revocation or transfer shall have been received by the Company at its Office before the commencement of the meeting or adjourned meeting at which the proxy is used.

90. CORPORATE MEMBERS Any corporation which is a Member of the Company may, by resolution of its Board of Directors or other governing body, authorize such person as it thinks fit to act as its representative at any meeting of the Company and the said person so authorized shall be entitled to exercise the same powers on behalf of the corporation which he represents as that corporation could have exercised if it were an individual Member of the Company (including the right to vote by proxy).

BOARD OF DIRECTORS

91. NUMBER OF DIRECTORS The number of Directors shall not be less than three (3) and not more than fifteen (15), and at least one

(1) Director shall be resident of India in the previous year.

Provided that the Company may appoint more than fifteen (15) directors after passing a Special Resolution.

The persons named below are the first Directors of the Company: i. Mr. Jagadish Shivaputrappa Melligeri; ii. Mr. K.V. Aravind Prabhu; iii. Mr. Aravind Melligeri; and iv. Mr. Ajit Prabhu

92. REMOVAL OF DIRECTORS The Company may, and subject to the provisions of Section 169 of the Act, remove any Director before the expiration of his period of office and appoint another Director.

93. SHARE QUALIFICATION NOT NECESSARY Any person whether a Member of the Company or not may be appointed as Director and no qualification by way of holding Shares shall be required of any Director.

94. ADDITIONAL DIRECTORS Subject to the provisions of the Act, the Board shall have power at any time, and from time to time, to appoint a person as an additional director, provided the number of the directors and additional directors together shall not at any time exceed the maximum strength fixed for the Board by the Articles. Any such additional director shall hold office only up to the date of the upcoming Annual General Meeting.

95. ALTERNATE DIRECTORS • The Board may, appoint a person, not being a person holding any alternate directorship for any other director in the Company, to act as an Alternate director for a director during his absence 668for a period of not less than 3 (three) months from India (hereinafter in this Article called the “Original Director”).

• An Alternate director shall not hold office for a period longer than that permissible to the Original Director in whose place he has been appointed and shall vacate the office if and when the Original Director returns to India. If the term of office of the Original Director is determined before he returns to India, the automatic re- appointment of retiring directors in default of another appointment shall apply to the Original Director and not to the Alternate director.

96. APPOINTMENT OF DIRECTOR TO FILL A CASUAL VACANCY If the office of any Director appointed by the Company in General Meeting is vacated before his term of office expires in the normal course, the resulting casual vacancy may, be filled by the Board of Directors at a meeting of the Board which shall be subsequently approved by Members in the immediate next General Meeting. The director so appointed shall hold office only up to the date which the director in whose place he is appointed would have held office if it had not been vacated.

97. REMUNERATION OF DIRECTORS • A Director (other than a Managing Director or whole-time Director) may receive a sitting fee not exceeding such sum as may be prescribed by the Act or the Central Government from time to time for each meeting of the Board of Directors or any committee thereof attended by him and the commission as may be approved by the Members of the Company. The remuneration of Directors including Managing Director and/or whole-time Director may be paid in accordance with the applicable provisions of the Act.

• The Board of Directors may allow and pay or reimburse any Director who is not a bona fide resident of the place where a meeting of the Board or of any committee is held and who shall come to such place for the purpose of attending such meeting or for attending its business at the request of the Company, such sum as the Board may consider fair compensation for travelling, and out-of-pocket expenses and if any Director be called upon to go or reside out of the ordinary place of his residence on the Company’s business he shall be entitled to be reimbursed any travelling or other expenses incurred in connection with the business of the Company.

• The Managing Directors/ whole-time Directors shall be entitled to charge and be paid for all actual expenses, if any, which they may incur for or in connection with the business of the Company. They shall be entitled to appoint part time employees in connection with the management of the affairs of the Company and shall be entitled to be paid by the Company any remuneration that they may pay to such part time employees.

98. REMUNERATION FOR EXTRA SERVICES If any Director, being willing, shall be called upon to perform extra services or to make any special exertions (which expression shall include work done by Director as a Member of any committee formed by the Board of Directors) in going or residing away from the town in which the Office of the Company may be situated for any purposes of the Company or in giving any special attention to the business of the Company or as member of the Board, then subject to the provisions of the Act, the Board may remunerate the Director so doing either by a fixed sum, or by a percentage of profits or otherwise and such remuneration, may be either in addition to or in substitution for any other remuneration to which he may be entitled.

99. CONTINUING DIRECTOR The continuing Board of Directors may act notwithstanding any vacancy in the Board, but if the number is reduced below three, the continuing Directors or Director may act for the purpose of increasing the number of Directors to three or for summoning a General Meeting of the Company, but for no other purpose.

100. VACATION OF OFFICE OF DIRECTOR The office of a Director shall be deemed to have been vacated under the circumstances enumerated under Act.

669101. ROTATION AND RETIREMENT OF DIRECTOR The appointment and retirement including by rotation of Directors shall be in accordance with the applicable provisions of the Act and the Rules thereunder

102. RETIRING DIRECTORS ELIGIBLE FOR RE-ELECTION A retiring Director shall be eligible for re-election and the Company, at the Annual General Meeting at which a Director retires in the manner aforesaid, may fill up the vacated office by electing a person thereto.

103. WHICH DIRECTOR TO RETIRE The Directors to retire in every year shall be those who have been longest in office since their last election, but as between persons who became Directors on the same day, those to retire shall (unless they otherwise agree among themselves) be determined by lots.

PROCEEDINGS OF BOARD OF DIRECTORS

104. MEETINGS OF THE BOARD • The Board of Directors shall meet at least once in every quarter with a maximum gap of one hundred and twenty (120) days between two (2) meetings of the Board for the dispatch of business, adjourn and otherwise regulate its meetings and proceedings as it thinks fit in accordance with the Act, provided that at least four (4) such meetings shall be held in every calendar year.

• The Chairman may, at any time, and the secretary or such other Officer of the Company as may be authorised in this behalf on the requisition of Director shall at any time summon a meeting of the Board. Notice of at least seven (7) days in writing of every meeting of the Board shall be given to every Director and every Alternate Director at his usual address whether in India or abroad either by hand or speed post or by registered post or by courier or by facsimile or by e- mail or by any other electronic means, provided always that a meeting may be convened by a shorter notice to transact urgent business subject to the condition that at least one Independent Director, if any, shall be present at the meeting and in case of absence of Independent Directors from such a meeting of the Board, decisions taken at such a meeting shall be circulated to all the directors and shall be final only on ratification thereof by at least one Independent Director, if any.

• The notice of each meeting of the Board shall include (i) the time for the proposed meeting; (ii) the venue for the proposed meeting; and (iii) an agenda setting out the business proposed to be transacted at the meeting.

• To the extent permissible by Applicable law(s), the Directors may participate in a meeting of the Board or any committee thereof, through electronic mode, that is, by way of video conferencing i.e., audio visual electronic communication facility. The notice of the meeting must inform the Directors regarding the availability of participation through video conferencing.

Any Director participating in a meeting through the use of video conferencing shall be counted for the purpose of quorum.

105. QUESTIONS AT BOARD MEETING HOW DECIDED Questions arising at any time at a meeting of the Board shall be decided by majority of votes and in case of equality of votes, the Chairman, or in his absence, the Director presiding as Chairman for the meeting shall have a second or casting vote.

106. QUORUM FOR BOARD MEETING Subject to the provisions of the Act and other Applicable law(s), the quorum for a meeting of the Board shall be one third of its total strength (any fraction contained in that one-third being rounded off as one) or two Directors whichever is higher and the participation of the directors by video conferencing or by other audio visual means shall also be counted for the purposes of quorum.

At any time, the number of interested Directors is equal to or exceeds two-thirds of total strength, the 670number of remaining Directors, that is to say the number of Directors who are not interested, present at the meeting being not less than two, shall be the quorum during such time. The total strength of the Board shall mean the number of Directors actually holding office as Directors on the date of the resolution or meeting, that is to say, the total strength of Board after deducting there from the number of Directors, if any, whose places are vacant at the time. The term ‘interested director’ means any Director whose presence cannot, by reason of applicable provisions of the Act be counted for the purpose of forming a quorum at meeting of the Board, at the time of the discussion or vote on the concerned matter or resolution.

107. ADJOURNED MEETING Subject to the provisions of the Act, if within half an hour from the time appointed for a meeting of the Board, a quorum is not present, the meeting, shall stand adjourned to the same day in the next week at the same time and place or to such other day and at such other time and place as the Board of Directors may determine.

108. ELECTION OF CHAIRMAN OF BOARD • The Board may elect a Chairman of its meeting and determine the period for which he is to hold office. The positions, duties and responsibilities of the Chairman (whether whole-time or not and notwithstanding the fact that his appointment may be in the designation of a whole-time Director under the Act) & the Chief Executive Officer (by whatever designation described) shall be accordingly defined by the Board. The Board may authorize maintenance of a Chairman’s Office at Company’s expense to support him in the performance of his duties.

• If at any meeting the Chairman is not present within thirty (30) minutes after the time appointed for holding the meeting, the Board of Directors present may choose one among themselves to be the Chairman of the meeting.

• Subject to the provisions of the Act, these Articles and of any Contract between him and the Company the remuneration of the Chairman (notwithstanding the fact that his appointment may be in the designation of a whole-time Director under the Act) may from time to time be fixed by the Directors, subject to the approval of the Company in General Meeting, and may be by way of fixed monthly payments, commission on profits of the Company; any or all of these modes or any other mode not expressly prohibited in the Act.

• The Board may from time to time appoint one amongst its members to be the Vice Chairman who shall perform the duties of Chairman in absence of Chairman.

109. POWERS OF DIRECTORS • The Board may exercise all such powers of the Company and do all such acts and things as are not, by the Act or any other Applicable law(s), or by the Memorandum or by the Articles required to be exercised by the Company in a General Meeting, subject nevertheless to these Articles, to the provisions of the Act or any other Applicable law(s) and to such regulations being not inconsistent with the aforesaid regulations or provisions, as may be prescribed by the Company in a General Meeting; but no regulation made by the Company in a General Meeting shall invalidate any prior act of the Board which would have been valid if that regulation had not been made.

• All cheques, promissory notes, drafts, hundis, bills of exchange and other negotiable instruments, and all receipts for monies paid to the Company, shall be signed, drawn, accepted, endorsed, or otherwise executed, as the case maybe, by such person and in such manner as the Board shall from time to time by resolution determine.

110. COMMITTEES AND DELEGATION OF POWERS BY BOARD • The Company shall constitute such Committees as may be required under the Act, and under Applicable law(s) and regulations. • Subject to the applicable provisions of the Act, the requirements of Law and these Articles, the Board may delegate any of its powers to Committees of the Board consisting of such member or members of the Board as it thinks fit, and it may from time to time revoke and discharge any such committee of the Board either wholly or in part and either as to persons or purposes. Every Committee of the Board so formed shall, in the exercise of the powers so delegated, conform to 671any regulations that may from time to time be imposed on it by the Board. All acts done by any such Committee of the Board in conformity with such regulations and in fulfilment of the purposes of their appointment but not otherwise, shall have the like force and effect as if done by the Board.

111. ELECTION OF CHAIRMAN OF COMMITTEE • The Board may elect a chairman for its committee(s). If no such chairman is elected or if at any meeting the chairman is not present within five minutes after the time appointed for holding the meeting, the Members present may choose one of themselves to be the chairman of the committee meeting.

• The quorum of a committee may be fixed by the Board of Directors or as may be prescribed under the Applicable law(s).

112. QUESTIONS HOW DETERMINED • A committee may meet and adjourn as it thinks proper. • Questions arising at any meeting of a committee shall be determined by a majority of votes of the Members present as the case may be and in case of equality of vote, the chairman shall have a second or casting vote, in addition to his vote as a member of the committee.

113. VALIDITY OF ACTS DONE BY BOARD OR A COMMITTEE All acts done by any meeting of the Board, of a committee thereof, or by any person acting as a Director shall notwithstanding that it may be afterwards discovered that there was some defect in the appointment of any one or more of such Directors or of any person acting as aforesaid or that they or any of them were disqualified be as valid as if even such Director or such person has been duly appointed and was qualified to be a Director.

114. RESOLUTION BY CIRCULATION Save as otherwise expressly provided in the Act, a resolution in writing circulated in draft together with the necessary papers, if any, to all the Directors or all the Members of the relevant committee and approved by a majority of them shall be valid and effectual as if it had been a resolution duly passed at a meeting of the Board or committee duly convened and held.

115. MAINTENANCE OF FOREIGN REGISTER The Company may exercise the powers conferred on it by the Act with regard to the keeping of a foreign register containing the names and particulars of the members, debenture-holders, other security holders or beneficial owners residing outside India and the Board may (subject to the provisions of those Sections) make and vary such regulations as it may think fit with respect to keeping of any such register.

116. BORROWING POWERS • Subject to the provisions of the Act and these Articles, the Board may from time to time at their discretion raise or borrow or secure the payment of any such sum of money for the purpose of the Company, in such manner and upon such terms and conditions in all respects as they think fit, and in particular, by promissory notes or by receiving deposits and advances with or without security or by the issue of bonds, debentures, perpetual or otherwise, including debentures convertible into Shares of this Company or any other company or perpetual annuities and to secure any such money so borrowed, raised or received, mortgage, pledge or charge the whole or any part of the property, assets or revenue of the Company present or future, including its uncalled capital by special assignment or otherwise or to transfer or convey the same absolutely or in trust and to give the lenders powers of sale and other powers as may be expedient and to purchase, redeem or pay off any such securities; provided however, that the moneys to be borrowed, together with the money already borrowed by the Company apart from temporary loans (as defined under Section 180(1) of the Act) obtained from the Company’s bankers in the ordinary course of business shall not, without the sanction of the Company by a Special Resolution at a General Meeting, exceed the aggregate of the paid-up share capital of the Company, its free reserves and securities premium. Provided that every Special Resolution 672passed by the Company in General Meeting in relation to the exercise of the power to borrow shall specify the total amount up to which moneys may be borrowed by the Board of Directors.

• The Board of Directors may by resolution at a meeting of the Board delegate the above power to borrow money to a committee of the Board or Managing Director or to any other person permitted by Applicable law(s), if any, within the limits prescribed.

• To the extent permitted under the Applicable law(s) and subject to compliance with the requirements thereof, the Board of Directors shall be empowered to grant loans to such entities at such terms as they may deem to be appropriate if the same shall be in the interests of the Company.

• Subject to the provisions of the Act, the Company may issue with respect to any fully paid Shares, a warrant stating that the bearer of the warrants is entitled to the Shares specified therein and may provide coupons or otherwise, for payment of future dividends on the Shares specified in the warrants and may provide conditions for registering Membership. Subject to the provisions of the Act, the Company may from time to time issue warrants naked or otherwise or issue coupons or other instruments and any combination of Equity Shares, Debentures, preference Shares or any other instruments to such class of persons as the Board of Directors may deem fit with a right attached to the holder of such warrants or coupons or other instruments to subscribe to the Equity Shares or other instruments within such time and at such price as the Board of Directors may decide as per the Rules applicable from time to time.

• Subject as herein otherwise expressly provided, no person shall as bearer of a share warrant, sign a requisition for calling a meeting of the Company or attend or vote or exercise any other privileges of a Member at a meeting of the Company or be entitled to receive any notice from the Company.

• Any bonds, debentures, debenture-stock or other securities may if permissible under Applicable law(s) be issued at a discount, premium or otherwise by the Company and shall with the consent of the Board be issued upon such terms and conditions and in such manner and for such consideration as the Board shall consider to be for the benefit of the Company, and on the condition that they or any part of them may be convertible into Equity Shares of any denomination, and with any privileges and conditions as to the redemption, surrender, allotment of Shares , attending (but not voting) in the General Meeting, appointment of Directors or otherwise. Provided that debentures with rights to allotment of or conversion into Equity Shares shall not be issued except with, the sanction of the Company in General Meeting accorded by a Special Resolution. Provided further that Company shall not issue any debentures carrying any voting rights.

117. NOMINEE DIRECTORS • Subject to the provisions of the Act, so long as any moneys remain owing by the Company to Financial Institutions regulated by the Reserve Bank of India, State Financial Corporation or any financial institution owned or controlled by the Central Government or State Government or any Non-Banking Financial Company regulated by the Reserve Bank of India or any such company from whom the Company has borrowed for the purpose of carrying on its objects or each of the above has granted any loans / or subscribes to the debentures of the Company or so long as any of the aforementioned companies of financial institutions holds or continues to hold debentures /Shares in the Company as a result of underwriting or by direct subscription or private placement or so long as any liability of the Company arising out of any guarantee furnished on behalf of the Company remains outstanding, and if the loan or other agreement with such institution/ corporation/ company (hereinafter referred to as the “Corporation”) so provides, the Corporation may, in pursuance of the provisions of any law for the time being in force or of any agreement, have a right to appoint from time to time any person or persons as a Director or Directors whole-time or non whole-time (which Director or Director/s is/are hereinafter referred to as “Nominee Directors/s”) on the Board of the Company and to remove from such office any person or person so appointed and to appoint any person or persons in his /their place(s).

• The Nominee Director/s appointed under this Article shall be entitled to receive all notices of and attend all General Meetings, Board meetings and of the meetings of the committee of which Nominee Director/s is/are member/s as also the minutes of such Meetings. The Corporation shall also be entitled to receive all such notices and minutes.

• The Company may pay the Nominee Director/s sitting fees and expenses to which the other Directors of the Company are entitled, but if any other fees commission, monies or remuneration in any form is payable to the Directors of the Company the fees, commission, monies and 673remuneration in relation to such Nominee Director/s may accrue to the nominee appointer and same shall accordingly be paid by the Company directly to the Corporation.

• Provided that the sitting fees, in relation to such Nominee Director/s shall also accrue to the appointer and same shall accordingly be paid by the Company directly to the appointer. • Such Nominee Director(s) appointed shall not be required to hold any share qualification in the Company, and subject to Applicable law(s), such Nominee Director(s) appointed under Article 117 shall not be liable to retire by rotation of Directors.

118. REGISTER OF CHARGES The Board of Directors shall cause a proper register to be kept, in accordance with the Act, of all mortgages and charges specifically affecting the property of the Company and shall duly comply with the requirements of the Act in regard to the registration of mortgages and charges therein specified.

119. MANAGING DIRECTOR(S) AND/OR WHOLE-TIME DIRECTORS AND/OR MANAGER • The Board may from time to time and with such sanction of the Central Government as may be required by the Act and approval of shareholders, appoint one or more of the Directors to the office of the Managing director and/ or whole-time directors and/or manager for such term and subject to such remuneration, terms and conditions as they may think fit.

• The Board of Directors may from time to time resolve that there shall be either one or more Managing directors and/ or whole-time directors. • In the event of any vacancy arising in the office of a Managing director and/or whole-time director and/or manager, the vacancy shall be filled by the Board of Directors subject to the approval of the Members, as required under Applicable law(s).

• If a Managing director and/or whole-time director ceases to hold office as Director, he shall ipso facto and immediately cease to be Managing director/whole time director.

120. POWERS AND DUTIES OF MANAGING DIRECTOR OR WHOLE-TIME DIRECTOR OR MANAGER The Managing Director/whole time director shall subject to the supervision, control and direction of the Board and subject to the provisions of the Act, exercise such powers as are exercisable under these Articles by the Board of Directors, as they may think fit and confer such power for such time and to be exercised as they may think expedient and they may confer such power either collaterally with or to the exclusion of any such substitution for all or any of the powers of the Board of Directors in that behalf and may from time to time revoke, withdraw, alter or vary all or any such powers. The Managing Directors/ whole time Directors/manager may exercise all the powers entrusted to them by the Board of Directors in accordance with the Board’s direction.

121. CHIEF EXECUTIVE OFFICER, COMPANY SECRETARY AND CHIEF FINANCIAL OFFICER Subject to the provisions of the Act — • A chief executive officer, Company Secretary and chief financial officer may be appointed by the Board for such term, at such remuneration and upon such conditions as it may think fit; and any chief executive officer, Company Secretary and chief financial officer so appointed may be removed by means of a resolution of the Board.

• A director may be appointed as chief executive officer, Company Secretary or chief financial officer. Further, an individual may be appointed or reappointed as the chairperson of the Company as well as the Managing Director or chief executive officer of the Company at the same time.

• A provision of the Act or the Articles requiring or authorising a thing to be done by or to a Director and chief executive officer, Company Secretary or chief financial officer shall not be satisfied by its being done by or to the same person acting both as a Director and as, or in place of, chief executive officer, manager, Company Secretary or chief financial officer.

674COMMON SEAL

122. CUSTODY OF COMMON SEAL The Board shall provide for the safe custody of the common seal for the Company and they shall have power from time to time to destroy the same and substitute a new seal in lieu thereof.

123. SEAL HOW AFFIXED The Board of Directors shall provide a common seal for the purpose of the Company and shall have power from time to time to destroy the same and substitute a new seal in lieu thereof, and the Board of Directors shall provide for the safe custody of the seal for the time being and the seal shall never be used except by or under the authority of the Board of Directors or a committee of the Board previously given, and in the presence of at least two Directors or any one Director and any other person authorized in this behalf. Such persons shall sign every document, deed or instrument to which the said common seal is affixed in their presence. Such signatures shall be conclusive evidence of the fact that the seal has been properly affixed.

The Company may exercise the powers conferred by the Act with regard to having an official seal for use abroad and such powers shall accordingly be vested in the Board of Directors or any other person duly authorized for the purpose.

DIVIDEND

124. COMPANY IN GENERAL MEETING MAY DECLARE DIVIDENDS The Company in General Meeting may declare dividends, but no dividend shall exceed the amount recommended by the Board.

125. INTERIM DIVIDENDS Subject to the provisions of the Act, the Board may from time to time pay to the Members such interim dividends of such amount on such class of Shares and at such times as it may think fit and as appear to it to be justified by the profits of the Company.

126. UNPAID OR UNCLAIMED DIVIDEND • Where capital is paid in advance of calls on Shares, such capital, whilst carrying interest, shall not confer a right to dividend or to participate in the profits. • Where the Company has declared a dividend but which has not been paid or claimed within thirty (30) days from the date of declaration, the Company shall within seven (7) days from the date of expiry of the said period of thirty (30) days, transfer the total amount of dividend which remains unpaid or unclaimed within the said period of thirty (30) days, to a special account to be opened by the Company in that behalf in any scheduled bank to be called “Unpaid Dividend Account of Aequs Limited” or having such other nomenclature as may be prescribed under the Applicable law(s).

• The Company shall, within a period of ninety days of making any transfer of an amount, as stated above to the unpaid dividend account, prepare a statement containing the names, their last known addresses and the unpaid dividend to be paid to each person and place it on the website of the Company, if any, and also on any other website approved by the Central Government for this purpose, in such form, manner and other particulars as may be prescribed.

If any default is made in transferring the total amount referred to in sub-article (b) or any part thereof to the unpaid dividend account of the Company, it shall pay, from the date of such default, interest on so much of the amount as has not been transferred to the said account, at the rate of twelve per cent. per annum and the interest accruing on such amount shall ensure to the benefit of the members of the company in proportion to the amount remaining unpaid to them.

• Any money transferred to the unpaid dividend account of the Company which remains unpaid or unclaimed for a period of seven (7) years from the date of such transfer, shall be transferred by the Company, along with interest accrued, if any, thereon to the fund known as Investor Education and Protection Fund established under the section 125 of the Act established by the Central Government, subject to the provisions of the Act and the rules.

675• No unclaimed or unpaid dividend shall be forfeited by the Board before the claim becomes barred by law. • All Shares in respect of which the Dividend has not been paid or claimed for 7 (seven) consecutive years or more shall be transferred by the Company in the name of Investor Education and Protection Fund along with a statement containing such details as may be prescribed. Provided that any claimant of Shares so transferred shall be entitled to claim the transfer of Shares from Investor Education and Protection Fund in accordance with such procedure and on submission of such documents as may be prescribed.

• All other provisions under the Act will be complied with in relation to the unpaid or unclaimed dividend.

127. DIVISION OF PROFITS Subject to the rights of persons, if any, entitled to Shares with special rights as to dividends, all dividends shall be declared and paid according to the amounts paid or credited as paid on the Shares in respect whereof the dividend is paid, but if and so long as nothing is paid upon any of the Shares in the Company, dividends may be declared and paid according to the amounts of the Shares.

128. DIVIDENDS TO BE APPORTIONED All dividends shall be apportioned and paid proportionately to the amounts paid or credited as paid on the Shares during any portion or portions of the period in respect of which the dividend is paid; but if any share is issued on terms providing that it shall rank for dividend as from a particular date such share shall rank for dividend accordingly.

129. RESERVE FUNDS • The Board may, before recommending any dividends, set aside out of the profits of the Company such sums as it thinks proper as a reserve or reserves which shall at the discretion of the Board, be applied for any purpose to which the profits of the Company may be properly applied, including provision for meeting contingencies or for equalizing dividends and pending such application, may, at the like discretion either be employed in the business of the Company or be invested in such investments (other than Shares of the Company) as the Board may, from time to time think fit.

• The Board may also carry forward any profits when it may consider necessary not to divide, without setting them aside as a reserve.

130. DEDUCTION OF ARREARS Subject to the Act, no Member shall be entitled to receive payment of any interest or dividend in respect of his share or Shares whilst any money may be due or owing from him to the Company in respect of such share or Shares of or otherwise howsoever whether alone or jointly with any other person or persons and the Board may deduct from any dividend payable to any Members all sums of money, if any, presently payable by him to the Company on account of the calls or otherwise in relation to the Shares of the Company.

131. RETENTION OF DIVIDENDS The Board may retain dividends payable upon Shares in respect of which any person is, entitled to become a Member, until such person shall become a Member in respect of such Shares.

132. RECEIPT OF JOINT HOLDER Any one of two or more joint holders of a share may give effective receipt for any dividends, bonuses or other moneys payable in respect of such Shares.

133. DIVIDEND HOW REMITTED Any dividend, interest or other monies payable in cash in respect of Shares may be paid by electronic mode or by cheque or warrant sent through the post directed to the registered address of the holder or, in the case of joint holders, to the registered address of that one of the joint holders who is first named on the Register of Members, or to such person and to such address as the holder or joint holders may in writing direct. Every such cheque or warrant shall be made payable to the order of the person to whom 676it is sent.

134. DIVIDENDS NOT TO BEAR INTEREST No dividends shall bear interest against the Company.

135. WAIVER OF DIVIDEND The waiver in whole or in part of any dividend on any share by any document (whether or not under seal) shall be effective only if such document is signed by the member (or the person entitled to the share in consequence of the death or bankruptcy of the holder) and delivered to the Company and if or to the extent that the same is accepted as such or acted upon by the Board.

136. TRANSFER OF SHARES AND DIVIDENDS Subject to the provisions of the Act, any transfer of Shares shall not pass the right to any dividend declared thereon before the registration of the transfer.

CAPITALISATION OF PROFITS

137. CAPITALISATION OF PROFITS • The Company in General Meeting, may, on recommendation of the Board resolve: a. that it is desirable to capitalise any part of the amount for the time being standing to the credit of the Company’s reserve accounts or to the credit of the profit and loss account or otherwise available for distribution; and b. that such sum be accordingly set free for distribution in the manner specified in the sub-clause (b) amongst the Members who would have been entitled thereto if distributed by way of dividend and in the same proportion.

• The sum aforesaid shall not be paid in cash but shall be applied, subject to the provision contained in sub-clause (c) below, either in or towards: a. paying up any amounts for the time being unpaid on Shares held by such Members respectively;

b. paying up in full, unissued share of the Company to be allotted and distributed, credited as fully paid-up, to and amongst such Members in the proportions aforesaid; or c. partly in the way specified in sub-clause (i) and partly that specified in sub- clause (ii).

d. A securities premium account and a capital redemption reserve account or any other permissible reserve account may be applied as permitted under the Act in the paying up of unissued Shares to be issued to Members of the Company as fully paid-up bonus Shares.

e. The Board shall give effect to the resolution passed by the Company in pursuance of these Articles.

ACCOUNTS

138. WHERE BOOKS OF ACCOUNTS TO BE KEPT The Books of Account shall be kept at the Office or at such other place in India as the Board of Directors think fit in accordance with the applicable provisions of the Act.

139. INSPECTION BY DIRECTORS a. The Board shall cause proper books of account to be maintained under Section 128 and other applicable provisions of the Act. b. The Board shall, from time to time, in accordance with the Act, determine whether and to what extent and at what times and places and under what conditions or regulations all books of the Company or any of them, shall be open to the inspection of Members not being Directors.

c. The books of account and books and papers of the Company, or any of them, shall be open to the inspection of directors in accordance with the applicable provisions of the Act.

140. INSPECTION BY MEMBERS 677No Member (not being a Director) shall have any right of inspecting any account or books or documents of the Company except as conferred by law or authorised by the Board.

141. REGISTERS AND DOCUMENTS The Company shall keep and maintain registers, books and documents required by the Act to the extent applicable to the Company from time to time. The registers, books and documents as provided in the foregoing Article shall (i) subject to such restrictions as provided in the Act and the Rules made thereunder (including any statutory modification or re-enactment thereof) and on payment of such fees as may be decided by the Board of Directors of the Company, be open to persons so authorised/entitled for inspection and extracts may be taken therefrom on working days except Saturdays and Sundays between 11.00 AM to 1.00 PM and (ii) copy thereof may be required by such persons who are entitled for the same and on payment of such fees as may be decided by the Board of Directors of the Company.

Provided that the fees (in case of (i) or (ii) above) so decided by the Board, in any case shall not exceed the maximum fees prescribed, in respect of inspection or copies thereof, as the case may be, for respective document/register, under the Act and Rules made thereunder from time to time.

The Company may charge from the Shareholder, the fee in advance, equivalent to the estimated actual expenses of delivery of the documents, pursuant to any request made by the Shareholder for delivery of such document to him, through a particular mode of service i.e. by post or by registered post or by speed post or by courier or by electronic or other mode, provided such request along with requisite fee has been duly received by the Company at least one week in advance of the dispatch of document by the Company.

SERVICE OF DOCUMENTS AND NOTICE

142. SERVICE OF DOCUMENTS BY REGISTERED POST OR BY SPEED POST OR BY COURIER A document may be served on a company or an officer thereof by sending it to the company or the officer at the registered office of the company by registered post or by speed post or by courier service or by

leaving it at its registered office or by means of such electronic or other mode as may be prescribed:

Provided that where securities are held with a depository, the records of the beneficial ownership may be served by such depository on the company by means of electronic or other mode.

Save as provided in the Act or the rules made thereunder for filing of documents with the Registrar in electronic mode, a document may be served on Registrar or any member by sending it to him by post or by registered post or by speed post or by courier or by delivering at his office or address, or by such

electronic or other mode as may be prescribed: Provided that a member may request for delivery of any document through a particular mode, for which he shall pay such fees as may be determined by the company in its annual general meeting.

143. MEMBERS TO NOTIFY ADDRESS IN INDIA Each registered holder of Shares from time to time notify in writing to the Company such place in India to be registered as his address and such registered place of address shall for all purposes be deemed to be his place of residence.

144. SERVICE ON MEMBERS HAVING NO REGISTERED ADDRESS If a Member has no registered address in India and has not supplied to the Company any address within India, for the giving of the notices to him, a document advertised in a newspaper circulating in the neighborhood of Office of the Company shall be deemed to be duly served to him on the day on which the advertisement appears.

145. SERVICE ON PERSONS ACQUIRING SHARES ON DEATH OR INSOLVENCY OF MEMBERS A document may be served by the Company on the persons entitled to a share in consequence of the death or insolvency of a Member by sending it through the post in a prepaid letter addressed to them by name or by the title or representatives of the deceased, assignees of the insolvent by any like description at the address (if any) in India supplied for the purpose by the persons claiming to be so entitled, or (until such an address has been so supplied) by serving the document in any manner in which the same might have been served as if the death or insolvency had not occurred.

678146. PERSONS ENTITLED TO NOTICE OF GENERAL MEETINGS Subject to the provisions of the Act and these Articles, notice of General Meeting shall be given: • To the Members of the Company as provided by these Articles.

• To the persons entitled to a share in consequence of the death or insolvency of a Member. • To the Directors of the Company. • To the Debenture Trustee(s) of the Company, if any. • To the Auditors for the time being of the Company; in the manner authorized by as in the case of any Member or Members of the Company.

• To the secretarial auditors of the Company.

147. NOTICE BY ADVERTISEMENT Subject to the provisions of the Act, any document required to be served or sent by the Company on or to the Members, or any of them and not expressly provided for by these Articles, shall be deemed to be duly served or sent if advertised in a newspaper circulating in the district in which the Office is situated.

148. MEMBERS BOUND BY DOCUMENT GIVEN TO PREVIOUS HOLDERS Every person, who by the operation of law, transfer or other means whatsoever, shall become entitled to any Shares , shall be bound by every document in respect of such share which, previously to his name and address being entered in the Register of Members, shall have been duly served on or sent to the person from whom he derived his title to such share.

Any notice to be given by the Company shall be signed by the Managing Director or by such Director or Company Secretary (if any) or Officer as the Directors may appoint. The signature to any notice to be given by the Company may be written or printed or lithographed or digitally signed.

WINDING UP

149. The Company may be wound up in accordance with the Act and the Insolvency and Bankruptcy Code, 2016, as amended (to the extent applicable) Subject to the applicable provisions of the Act – • If the Company shall be wound up, the liquidator may, with the sanction of a Special Resolution of the Company and any other sanction required by the Act, divide amongst the Members, in specie or kind, the whole or any part of the assets of the Company, whether they shall consist of property of the same kind or not.

• For the purpose aforesaid, the liquidator may set such value as he deems fair upon any property to be divided as aforesaid and may determine how such division shall be carried out as between the Members or different classes of Members.

• The liquidator may, with the like sanction, vest the whole or any part of such assets in trustees upon such trusts for the benefit of the contributories if he considers necessary, but so that no member shall be compelled to accept any Shares or other securities whereon there is any liability.

• Any person who is or has been a Director or manager, whose liability is unlimited under the Act, shall, in addition to his liability, if any, to contribute as an ordinary member, be liable to make a further contribution as if he were at the commencement of winding up, a member of an unlimited company, in accordance with the provisions of the Act.

150. APPLICATION OF ASSETS Subject to the provisions of the Act as to preferential payment the assets of the Company shall, on its winding up, be applied in satisfaction of its liabilities pari passu and, subject to such application shall be distributed among the Members according to their rights and interests in the Company.

INDEMNITY

151. DIRECTOR’S AND OTHERS’ RIGHT TO INDEMNITY Subject to the provisions of the Act and other Applicable law(s), every Director and Officer of the Company shall be indemnified by the Company against any liability incurred by him in his capacity as Director or Officer of the Company including in relation to defending any proceedings, whether civil or 679criminal, in which judgment is given in his favour or in which he is acquitted or in which relief is granted to him by the court or the National Company Law Tribunal. Provided, however, that such indemnification shall not apply in respect of any cost or loss or expenses to the extent it is finally judicially determined to have resulted from the negligence, wilful misconduct or bad faith acts or omissions of such Director or officer of the Company.

152. INSURANCE The Company shall obtain and at all times maintain, a valid Directors’ and officers’ liability insurance for all the Directors. Subject to the Law, the Company shall indemnify and hold harmless the Directors and the observer from and against any act, omission or conduct (including, without limitation, contravention of any Law) of or by the Company or on its behalf, as a result of which, in whole or in part, the Directors are made a party to, or otherwise incurs any Loss.

SECRECY CLAUSE

153. SECRECY No Member or other person (not being a Director) shall be entitled to inspect the Company’s works without the permission of the managing director / Directors or to require discovery of any information respectively and detail of the Company’s trading or any matter which is or may be in the nature of a trade secret, history of trade or secret process, or of any matter whatsoever, which may be related to the conduct of the business of the Company and which in the opinion of the Board/Directors will be inexpedient in the interest of the Members of the Company to communicate to the public.

Every manager, auditor, trustee, member of a Committee, officer, servant, agent, accountant or other Persons employed in the business of the Company shall, if so required by the Board, before entering upon the duties, sign a declaration pledging himself to observe strict secrecy respecting all bona fide transactions of the Company with its customers and the state of accounts with individuals and in matters relating thereto and shall by such declaration pledge himself not to reveal any of the matters which may come to his knowledge in the discharge of his duties except when required to do so by the Directors or by any General Meeting or by the Law of the country and except so far as may be necessary in order to comply with any of the provisions in these Articles and the provisions of the Act.

GENERAL POWER Wherever in the Act, it has been provided that the Company shall have any right, privilege or authority or that the Company could carry out any transaction only if the Company is so authorized by its articles, then and in that case this Article authorizes and empowers the Company to have such rights, privileges or authorities and to carry such transactions as have been permitted by the Act, without there being any specific Article in that behalf herein

provided.

At any point of time from the date of adoption of these Articles, if these Articles are or become contrary to the provisions of the Act, the Rules, the Listing Regulations and any other Applicable law(s), the provisions of the Act, the Rules, the Listing Regulations and other Applicable law(s)s shall prevail over these Articles to such extent and the Company shall, at all times, discharge all of its obligations as prescribed under Applicable law(s), from time to time.

PART B Part B of the Articles of Association provides for, among other things, the rights of certain shareholders pursuant to the SHA. For more details on the SHA, see “History and Certain Corporate Matters ––Details of shareholders agreements - Shareholders’ agreement dated October 12, 2023, read with supplementary letter dated October 27, 2023, amendment agreement dated February 18, 2025 and the amendment and termination agreement dated May 12, 2025, entered into by and among our Company, Aequs Manufacturing Investments Private Limited, Melligeri Private Family Foundation, Aravind Shivaputrappa Melligeri, Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II, Amansa Investments Limited, Catamaran Ekam (acting through its trustee, Catamaran Advisors LLP), Steadview Capital Mauritius Limited, Sparta Group LLC, Ravindra K Mariwala, Vasundhara Dempo Family Private Trust, Girija Dempo Family Private Trust, Mukul Mahavir Agrawal and certain other Shareholders (collectively the “SHA Parties”) (“SHA”)” on page 340.

680SECTION IX – OTHER INFORMATION MATERIAL CONTRACTS AND DOCUMENTS FOR INSPECTION The copies of the following documents and contracts which have been entered or are to be entered into by our Company (not being contracts entered into in the ordinary course of business carried on by our Company) which are, or may be deemed material, have been entered or to be entered into by our Company were attached to the copy of the Red Herring Prospectus filed with the RoC and are attached to this Prospectus. Copies of the contracts and documents for inspection referred to hereunder, were made available at our Registered Office, from 10.00 am to 5.00 pm on all Working Days and were also made available on the website of our Company at www.aequs.com/investor/, from the date of the Red Herring Prospectus until the Bid/Offer Closing Date, except for such contracts and documents that will be entered into or executed subsequent to the completion of the Bid/Offer Closing Date.

Material Contracts to the Offer

1. Offer agreement dated May 31, 2025 entered into among our Company, the Selling Shareholders and the BRLMs.

2. Registrar agreement dated May 31, 2025 entered into among our Company, the Selling Shareholders and the Registrar to the Offer.

3. Monitoring agency agreement dated November 12, 2025, entered into between our Company and the Monitoring Agency.

4. Cash escrow and sponsor bank agreement dated November 26, 2025 entered into among our Company, the Selling Shareholders, the BRLMs, the Syndicate Members, Banker(s) to the Offer and the Registrar to the Offer.

5. Share escrow agreement dated November 24, 2025 entered into among the Selling Shareholders, our Company and the Share Escrow Agent.

6. Syndicate agreement dated November 26, 2025 entered into among the members of the Syndicate, our Company, the Selling Shareholders and the Registrar to the Offer; and

7. Underwriting agreement dated December 5, 2025 entered into among our Company, the Selling Shareholders, the Registrar to the Offer and the Underwriters.

Material Documents

1. Certified copies of our Memorandum of Association and Articles of Association, as amended till date.

2. Certificate of incorporation dated March 27, 2000, by the RoC to our Company, in the name of ‘Mechanical Training Acadamy Private Limited’.

3. Fresh certificate of incorporation dated April 18, 2006 issued to our Company by the RoC, pursuant to change of name of our Company from ‘Mechanical Training Acadamy Private Limited’ to ‘QuEST Machining & Manufacturing Private Limited’.

4. Fresh certificate of incorporation dated March 24, 2011 issued to our Company by the RoC, pursuant to change of name of our Company from ‘QuEST Machining & Manufacturing Private Limited’ to ‘QuEST Global Manufacturing Private Limited’.

5. Fresh certificate of incorporation dated March 5, 2014 issued to our Company by the RoC, pursuant to change of name of our Company from ‘QuEST Global Manufacturing Private Limited’ to ‘Aequs Private Limited’.

6. Fresh certificate of incorporation dated May 7, 2025 issued by the RoC CPC to our Company, pursuant to conversion of our Company into a public limited company, and consequential change in our name from ‘Aequs Private Limited’ to ‘Aequs Limited’.

7. Copies of our annual reports for the preceding three Fiscals.

8. Resolution of our Board dated May 10, 2025 read with resolution dated September 24, 2025 and November 14, 2025 authorizing the Offer and other related matters.

9. Resolution of our Shareholders dated May 13, 2025, authorizing the Fresh Issue and other related matters.

68110. Consent letters each dated (a) November 13, 2025 from Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II, Girija Dempo Family Private Trust, Vasundhara Dempo Family Private Trust and Ravindra Mariwala; and (b) May 30, 2025, from Raman Subramanian, Aequs Manufacturing Investments Private Limited, and Melligeri Private Family Foundation.

11. Resolutions passed by the board of directors/ corporate actions/ authorization letters, as applicable, by (i) Aequs Manufacturing Investments Private Limited dated May 9, 2025; (ii) Melligeri Private Family Foundation dated May 20, 2025; (iii) Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II each dated May 13, 2025; (iv) Girija Dempo Family Private Trust, Vasundhara Dempo Family Private Trust each dated May 12, 2025, with respect to participation in the Offer for Sale.

12. Resolutions of our Board dated May 30, 2025, read with November 14, 2025, taking on record the consent letters of the Selling Shareholders to participate in the Offer for Sale.

13. Resolution of our Board dated May 30, 2025 and resolution of our IPO Committee dated May 31, 2025, approving the Pre-filed Draft Red Herring Prospectus.

14. Resolution of our Board dated September 30, 2025 approving the Updated Draft Red Herring Prospectus – I.

15. Resolution of our Board dated November 26, 2025 approving the Red Herring Prospectus.

16. Resolution of our Board dated December 5, 2025 approving this Prospectus.

17. Resolution of Audit Committee dated November 26, 2025, approving the KPIs.

18. Resolution of our Board dated May 10, 2025 and Shareholders dated May 13, 2025 for the appointment of Aravind Shivaputrappa Melligeri as the Executive Chairman and Chief Executive Officer of our Company.

19. Resolution of our Shareholders dated May 13, 2025 laying down the terms of appointment of Aravind Shivaputrappa Melligeri as the Executive Chairman and Chief Executive Officer of our Company.

20. Resolution of our Board dated April 21, 2025 and Shareholders dated April 25, 2025 for the appointment of Rajeev Kaul as the Managing Director of our Company.

21. The report dated November 14, 2025, of our Statutory Auditors on the statement of possible special tax benefits available to our Company, our Shareholders, AeroStructures Manufacturing India Private Limited and Aequs Engineered Plastics Private Limited.

22. The report dated November 13, 2025, of Martin Bahl, CPA, Bahl & Co., P.C on the statement of possible special tax benefits available to Aequs Aero Machine Inc. and Aequs Oil & Gas LLC, including their consent to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013 to the extent applicable, and in their capacity as the certified public accountants, in respect of such report included in this Prospectus. However, the term “expert” shall not be construed to mean an “expert” as defined under the U. S. Securities Act.

23. The report dated November 12, 2025, of PKF Arsilon on the statement of possible special tax benefits available to Aequs Aerospace France SAS, including their consent to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013 to the extent applicable, and in their capacity as the statutory auditor, in respect of such report included in this Prospectus. However, the term “expert” shall not be construed to mean an “expert” as defined under the U. S. Securities Act.

24. The report dated November 13, 2025, of KC Legal on the statement of possible special tax benefits available to Aequs Aerospace B.V., including their consent to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under

Section 2(38) of the Companies Act 2013 to the extent applicable, in respect of such report, included in this Prospectus. However, the term “expert” shall not be construed to mean an “expert” as defined under the U.S.

Securities Act.

25. The examination report dated November 14, 2025, of our Statutory Auditors on our Restated Consolidated Financial Information.

26. Certificate dated November 26, 2025 issued by the Statutory Auditors certifying the utilization of the 682borrowings proposed to be repaid through the Net Proceeds, availed by the Company and certain Subsidiaries, for the purpose for which such borrowings were availed.

27. Certificate dated November 26, 2025 issued by the Statutory Auditors certifying the utilization of the Pre-IPO Proceeds.

28. Industry report titled “An Assessment of Aerospace and Consumer PEC Industry” dated November 14, 2025, prepared and issued by F&S, letter of engagement dated December 10, 2024, as supplemented by a subsequent engagement letter dated September 8, 2025 between F&S and our Company, and the consent letter dated November 14, 2025, issued by F&S.

29. Consent letter dated November 26, 2025, from B S R & Co. LLP, Chartered Accountants to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013 to the extent applicable, and in their capacity as our Statutory Auditors, and in respect of their (i) examination report dated November 14, 2025, on our Restated Consolidated Financial Information; and (ii) report dated November 14, 2025, on the statement of possible special tax benefits available to our (a) Company and its Shareholders; (b) certain of our Material Subsidiaries, being AeroStructures Manufacturing India Private Limited and Aequs Engineered Plastics Private Limited, included in this Prospectus. However, the term “expert” shall not be construed to mean an “expert” as defined under the US Securities Act.

30. Consent letter dated May 31, 2025 from Manian & Rao, Chartered Accountants (FRN No. 001983S), the independent chartered accountants, to include their name in this Prospectus as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations as an “expert” as defined under Section 2(38) of the Companies Act 2013 in respect of various certificates issued by them in their capacity as the independent chartered accountant to our Company.

31. Consent from Vishvakarma Consultancy Services Private Limited as part of the certification issued by them dated November 16, 2025, to include their name as required under Section 26 of the Companies Act 2013 read with SEBI ICDR Regulations, in this Prospectus and as an “expert” as defined under Section 2(38) of the Companies Act 2013, in their capacity as independent chartered engineer to our Company.

32. Certificate dated November 26, 2025, from Manian & Rao, Chartered Accountants (FRN No. 001983S), certifying the KPIs of our Company;

33. Certificate each dated December 5, 2025, from Manian & Rao, Chartered Accountants (FRN No. 001983S), certifying the (i) basis for Offer Price; and (ii) average cost of acquisition, weighted average cost of acquisition and weighted average price of shares of the Company.

34. Certificate dated November 26, 2025, from Manian & Rao, Chartered Accountants (FRN No. 001983S), certifying the details of machinery and equipment proposed to be purchased through the Net Proceeds.

35. Certificate dated November 26, 2025 from Manian & Rao, Chartered Accountants (FRN No. 001983S) on utilization of the Net Pre-IPO Proceeds towards general corporate purposes.

36. Certificate dated November 26, 2025 and December 5, 2025 from Manian & Rao, Chartered Accountants (FRN No. 001983S) on (i) financial indebtedness; and (ii) employee stock option scheme, respectively.

37. Consents of bankers to our Company, the BRLMs, legal counsel to our Company as to Indian law, Directors, Promoters, Company Secretary and Compliance Officer, Chief Financial Officer, Bankers to the Offer, Syndicate Members, Registrar to the Offer, Monitoring Agency, Escrow Collection Bank(s), Public Offer Account Bank(s), Refund Bank(s), Sponsor Bank(s), as referred to in their specific capacities to act in their respective capacities.

38. Trademark license agreement dated December 1, 2020 by and among MFO IP Holdings Limited (formerly known as Aequs Limited, Malta), our Company, read with the amendment agreement dated October 1, 2022 and supersession understanding dated January 1, 2024.

39. Stock purchase agreement dated June 2, 2015 entered into amongst Aequs Aerospace LLC, USA, Stonehenge Capital Fund Texas, LP, Advantage Capital Community Development Fund LLC, Texas ACP I LP, T&K Machine Inc. and other shareholders of T&K Machine Inc.

40. Share purchase agreement dated January 14, 2016, entered into amongst Aequs Holdings France SAS, Alain Blevin, Jean-Robert Martin, FCPR MBO Capital 2 and Arkea Capital Investissement.

68341. Shareholders’ agreement dated October 12, 2023, read with supplementary letter dated October 27, 2023, amendment agreement dated February 18, 2025 and the amendment and termination agreement dated May 12, 2025, entered into by and among our Company, Aequs Manufacturing Investments Private Limited, Melligeri Private Family Foundation, Aravind Shivaputrappa Melligeri, Amicus Capital Private Equity I LLP, Amicus Capital Partners India Fund I, Amicus Capital Partners India Fund II, Amansa Investments Limited, Catamaran Ekam (acting through its trustee, Catamaran Advisors LLP), Steadview Capital Mauritius Limited, Sparta Group LLC, Ravindra K Mariwala, Vasundhara Dempo Family Private Trust, Girija Dempo Family Private Trust, Mukul Mahavir Agrawal and certain other Shareholders.

42. Share purchase agreement dated December 2, 2021, entered into between our Company and Aequs Manufacturing Investments Private Limited.

43. Valuation report dated October 22, 2021 issued by BDO Valuation Advisory LLP for determination of consideration of transfer of Equity Shares to our Corporate Promoter, in lieu of acquisition of equity shares of certain of our Subsidiaries from our Corporate Promoter.

44. Consent letter dated May 20, 2025 issued by BDO Valuation Advisory LLP.

45. Share purchase agreement dated July 14, 2021 entered into between our Company, Saab AB (publ) and Aerostructures Assemblies India Private Limited.

46. Valuation report dated May 18, 2021 issued by Fedex Securities Private Limited for determination of consideration of acquisition of 26% of the equity share capital of Aerostructures Assemblies India Private Limited from Saab AB (publ) by our Company.

47. Consent letter dated May 15, 2025 issued by Fedex Securities Private Limited.

48. Tripartite agreement dated October 8, 2012, among our Company, NSDL and Registrar to the Offer.

49. Tripartite agreement dated March 12, 2025, among our Company, CDSL and the Registrar to the Offer.

50. Letter to SEBI from the BRLMs dated November 11, 2025 in relation to the Pre-IPO Placement undertaken by our Company containing the confirmations (i) that the subscribers were intimated that there was no guarantee that our Company would proceed with the Offer or such Offer would be successful, (ii) that the Pre- IPO Placement was disclosed by way of public announcement, and (iii) that the Company has undertaken that the proceeds from the Pre-IPO Placement shall be completely attributed/adjusted towards funding Objects of the Offer, including general corporate purposes;

51. Due diligence certificate to SEBI from the BRLMs dated May 31, 2025.

52. In-principle listing approvals from BSE and NSE, each dated July 31, 2025; and

53. Final observation letter dated September 18, 2025 issued by SEBI (Ref. No. SEBI/CFD/RAC/DIL- 2/P/OW/37901/2025).

Any of the contracts or documents mentioned in this Prospectus may be amended or modified at any time if so, required in the interest of our Company or if required by other parties, without reference to the Shareholders, subject to compliance of the provisions contained in the Companies Act 2013 and other applicable law.

684DECLARATION I hereby certify and declare that all relevant provisions of the Companies Act 2013, and the rules, regulations and guidelines issued by the Government of India, or the rules, regulations and guidelines issued by the Securities and Exchange Board of India established under Section 3 of the Securities and Exchange Board of India Act, 1992, as the case may be, have been complied with and no statements, disclosures and undertakings made in this Prospectus are contrary to the provisions of the Companies Act 2013, the Securities and Exchange Board of India Act, 1992, the Securities Contracts (Regulation) Act, 1956 and the Securities Contracts (Regulation) Rules, 1957, each as amended, or the rules, regulations and guidelines issued thereunder, as the case may be. I further certify that all the statements, disclosures and undertakings in this Prospectus are true and correct.

SIGNED BY THE DIRECTOR OF OUR COMPANY _________________________ Aravind Shivaputrappa Melligeri Executive Chairman and Chief Executive Officer

Date: December 5, 2025

Place: Belagavi 685DECLARATION I hereby certify and declare that all relevant provisions of the Companies Act 2013, and the rules, regulations and guidelines issued by the Government of India, or the rules, regulations and guidelines issued by the Securities and Exchange Board of India established under Section 3 of the Securities and Exchange Board of India Act, 1992, as the case may be, have been complied with and no statements, disclosures and undertakings made in this Prospectus are contrary to the provisions of the Companies Act 2013, the Securities and Exchange Board of India Act, 1992, the Securities Contracts (Regulation) Act, 1956 and the Securities Contracts (Regulation) Rules, 1957, each as amended, or the rules, regulations and guidelines issued thereunder, as the case may be. I further certify that all the statements, disclosures and undertakings in this Prospectus are true and correct.

SIGNED BY THE DIRECTOR OF OUR COMPANY ___________________________________ Rajeev Kaul Managing Director

Date:December 5, 2025

Place: Belagavi 686DECLARATION I hereby certify and declare that all relevant provisions of the Companies Act 2013, and the rules, regulations and guidelines issued by the Government of India, or the rules, regulations and guidelines issued by the Securities and Exchange Board of India established under Section 3 of the Securities and Exchange Board of India Act, 1992, as the case may be, have been complied with and no statements, disclosures and undertakings made in this Prospectus are contrary to the provisions of the Companies Act 2013, the Securities and Exchange Board of India Act, 1992, the Securities Contracts (Regulation) Act, 1956 and the Securities Contracts (Regulation) Rules, 1957, each as amended, or the rules, regulations and guidelines issued thereunder, as the case may be. I further certify that all the statements, disclosures and undertakings in this Prospectus are true and correct.

SIGNED BY THE DIRECTOR OF OUR COMPANY ____________________ Ajay Aravind Prabhu Non-executive Director

Date:December 5, 2025

Place: New Zealand 687DECLARATION I hereby certify and declare that all relevant provisions of the Companies Act 2013, and the rules, regulations and guidelines issued by the Government of India, or the rules, regulations and guidelines issued by the Securities and Exchange Board of India established under Section 3 of the Securities and Exchange Board of India Act, 1992, as the case may be, have been complied with and no statements, disclosures and undertakings made in this Prospectus are contrary to the provisions of the Companies Act 2013, the Securities and Exchange Board of India Act, 1992, the Securities Contracts (Regulation) Act, 1956 and the Securities Contracts (Regulation) Rules, 1957, each as amended, or the rules, regulations and guidelines issued thereunder, as the case may be. I further certify that all the statements, disclosures and undertakings in this Prospectus are true and correct.

SIGNED BY THE DIRECTOR OF OUR COMPANY _________________________ Eberhard Klaus Richter Independent Director

Date:December 5, 2025

Place: Munich, Germany 688DECLARATION I hereby certify and declare that all relevant provisions of the Companies Act 2013, and the rules, regulations and guidelines issued by the Government of India, or the rules, regulations and guidelines issued by the Securities and Exchange Board of India established under Section 3 of the Securities and Exchange Board of India Act, 1992, as the case may be, have been complied with and no statements, disclosures and undertakings made in this Prospectus are contrary to the provisions of the Companies Act 2013, the Securities and Exchange Board of India Act, 1992, the Securities Contracts (Regulation) Act, 1956 and the Securities Contracts (Regulation) Rules, 1957, each as amended, or the rules, regulations and guidelines issued thereunder, as the case may be. I further certify that all the statements, disclosures and undertakings in this Prospectus are true and correct.

SIGNED BY THE DIRECTOR OF OUR COMPANY ____________________ Vidya Sarathy Independent Director

Date:December 5, 2025

Place: Bengaluru 689DECLARATION I hereby certify and declare that all relevant provisions of the Companies Act 2013, and the rules, regulations and guidelines issued by the Government of India, or the rules, regulations and guidelines issued by the Securities and Exchange Board of India established under Section 3 of the Securities and Exchange Board of India Act, 1992, as the case may be, have been complied with and no statements, disclosures and undertakings made in this Prospectus are contrary to the provisions of the Companies Act 2013, the Securities and Exchange Board of India Act, 1992, the Securities Contracts (Regulation) Act, 1956 and the Securities Contracts (Regulation) Rules, 1957, each as amended, or the rules, regulations and guidelines issued thereunder, as the case may be. I further certify that all the statements, disclosures and undertakings in this Prospectus are true and correct.

SIGNED BY THE DIRECTOR OF OUR COMPANY ____________________ Anup Wadhawan Independent Director

Date:December 5, 2025

Place: Delhi 690DECLARATION I hereby certify and declare that all relevant provisions of the Companies Act 2013, and the rules, regulations and guidelines issued by the Government of India, or the rules, regulations and guidelines issued by the Securities and Exchange Board of India established under Section 3 of the Securities and Exchange Board of India Act, 1992, as the case may be, have been complied with and no statements, disclosures and undertakings made in this Prospectus are contrary to the provisions of the Companies Act 2013, the Securities and Exchange Board of India Act, 1992, the Securities Contracts (Regulation) Act, 1956 and the Securities Contracts (Regulation) Rules, 1957, each as amended, or the rules, regulations and guidelines issued thereunder, as the case may be. I further certify that all the statements, disclosures and undertakings in this Prospectus are true and correct.

SIGNED BY THE CHIEF FINANCIAL OFFICER _________________________ Dinesh Venkatachalam Iyer

Date:December 5, 2025

Place: Belagavi 691DECLARATION We, Aequs Manufacturing Investments Private Limited, the Promoter Selling Shareholder, hereby confirm that all statements, disclosures and undertakings specifically made or confirmed by us in this Prospectus in relation to us, as the Promoter Selling Shareholder and the Offered Shares, are true and correct. We assume no responsibility for any other statements, disclosures and undertakings, including, any of the statements, disclosures and undertakings made or confirmed by or relating to the Company or any other Selling Shareholder(s) or any other person(s) in this Prospectus.

For and on behalf of Aequs Manufacturing Investments Private Limited _________________________

Name: Nayana Wali

Designation: Director

Date:December 5, 2025

Place: Bengaluru 692DECLARATION We, Melligeri Private Family Foundation, the Promoter Selling Shareholder, hereby confirm that all statements, disclosures and undertakings specifically made or confirmed by us in this Prospectus in relation to us, as the Promoter Selling Shareholder and the Offered Shares, are true and correct. We assume no responsibility for any other statements, disclosures and undertakings, including, any of the statements, disclosures and undertakings made or confirmed by or relating to the Company or any other Selling Shareholder(s) or any other person(s) in this Prospectus.

For and on behalf of Melligeri Private Family Foundation _________________________

Name: A. Raghavendra

Designation: Trustee

Date:December 5, 2025

Place: Bengaluru 693DECLARATION We, Amicus Capital Private Equity I LLP, the Investor Selling Shareholder, hereby confirm that all statements, disclosures and undertakings specifically made or confirmed by us in this Prospectus in relation to us, as the Investor Selling Shareholder and the Offered Shares, are true and correct. We assume no responsibility for any other statements, disclosures and undertakings, including, any of the statements, disclosures and undertakings made or confirmed by or relating to the Company or any other Selling Shareholder(s) or any other person(s) in this Prospectus.

For and on behalf of Amicus Capital Private Equity I LLP _________________________

Name: Mahesh Parasuraman

Designation: Authorised Signatory

Date:December 5, 2025

Place: Bengaluru 694DECLARATION We, Amicus Capital Partners India Fund I, the Investor Selling Shareholder, hereby confirm that all statements, disclosures and undertakings specifically made or confirmed by us in this Prospectus in relation to us, as the Investor Selling Shareholder and the Offered Shares, are true and correct. We assume no responsibility for any other statements, disclosures and undertakings, including, any of the statements, disclosures and undertakings made or confirmed by or relating to the Company or any other Selling Shareholder(s) or any other person(s) in this Prospectus.

For and on behalf of Amicus Capital Partners India Fund I _________________________

Name: Mahesh Parasuraman

Designation: Authorised Signatory

Date:December 5, 2025

Place: Bengaluru 695DECLARATION We, Amicus Capital Partners India Fund II, the Investor Selling Shareholder, hereby confirm that all statements, disclosures and undertakings specifically made or confirmed by us in this Prospectus in relation to us, as the Investor Selling Shareholder and the Offered Shares, are true and correct. We assume no responsibility for any other statements, disclosures and undertakings, including, any of the statements, disclosures and undertakings made or confirmed by or relating to the Company or any other Selling Shareholder(s) or any other person(s) in this Prospectus.

For and on behalf of Amicus Capital Partners India Fund II _________________________

Name: Mahesh Parasuraman

Designation: Authorised Signatory

Date:December 5, 2025

Place: Bengaluru 696DECLARATION We, Vasundhara Dempo Family Private Trust, the Investor Selling Shareholder, hereby confirm that all statements, disclosures and undertakings specifically made or confirmed by us in this Prospectus in relation to us, as the Investor Selling Shareholder and the Offered Shares, are true and correct. We assume no responsibility for any other statements, disclosures and undertakings, including, any of the statements, disclosures and undertakings made or confirmed by or relating to the Company or any other Selling Shareholder(s) or any other person(s) in this Prospectus.

For and on behalf of Vasundhara Dempo Family Private Trust _________________________

Name: Shrinivas V. Dempo

Designation: Authorised Signatory

Date:December 5, 2025

Place: Panaji, Goa 697DECLARATION We, Girija Dempo Family Private Trust, the Investor Selling Shareholder, hereby confirm that all statements, disclosures and undertakings specifically made or confirmed by us in this Prospectus in relation to us, as the Investor Selling Shareholder and the Offered Shares, are true and correct. We assume no responsibility for any other statements, disclosures and undertakings, including, any of the statements, disclosures and undertakings made or confirmed by or relating to the Company or any other Selling Shareholder(s) or any other person(s) in this Prospectus.

For and on behalf of Girija Dempo Family Private Trust _________________________

Name: Shrinivas V. Dempo

Designation: Authorised Signatory

Date:December 5, 2025

Place: Panaji, Goa 698DECLARATION I, Raman Subramanian, acting as an Individual Selling Shareholder, hereby confirm that all statements, disclosures and undertakings specifically made or confirmed by me in this Prospectus in relation to myself, severally and not jointly, as an Individual Selling Shareholder and my portion of the Offered Shares, are true and correct. I assume no responsibility, for any other statements and undertakings, including, any of the statements, disclosures or undertakings made or confirmed by or relating to the Company, or any other Selling Shareholder(s) or any other person(s) in this Prospectus.

_________________________ Raman Subramanian

Date:December 5, 2025

Place: Bengaluru 699DECLARATION I, Ravindra Mariwala, acting as an Individual Selling Shareholder, hereby confirm that all statements, disclosures and undertakings specifically made or confirmed by me in this Prospectus in relation to myself, severally and not jointly, as an Individual Selling Shareholder and my portion of the Offered Shares, are true and correct. I assume no responsibility, for any other statements and undertakings, including, any of the statements, disclosures or undertakings made or confirmed by or relating to the Company, or any other Selling Shareholder(s) or any other person(s) in this Prospectus.

_________________________ Ravindra Mariwala

Date:December 5, 2025

Place: Mumbai 700