Home India Ministry of Electronics and Information Technology Amendment to Electronic Product Notification dated 07.09.202...
Date: 19-Oct-2023 Category: Extra Ordinary State: Union Government Country: India

Amendment to Electronic Product Notification dated 07.09.2020

Issued by Ministry of Electronics and Information Technology · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

What it means

  • This notification amends the mechanism for calculating local content in servers, as previously defined in the Ministry of Electronics and Information Technology (MeitY) Gazette Notification F.No.W-43/4/2019-IPHW-MeitY dated 07.09.2020. The amendment is effective immediately.

Key Changes

  • The notification revises the mechanism for calculating local content for servers, specifically Clause 4.12 (B).
  • The domestic Bill of Material (BOM) of a server will be the sum of the cost of main inputs specified in Column 1 of the provided table, provided that each input individually meets the value addition requirement specified in Column 2 of the same table.
  • The weightage of the total value of 'Add on Controller' shall not exceed 3% of the total BOM of the Server.
  • Specific requirements for domestic PCB assembly and testing are defined for Server Boards/Motherboards, Memory Modules and Add-on Controllers.
  • For SMPS (Switch Mode Power Supply) used in Cabinets, the value of domestically manufactured parts and components must be a minimum of 25% of the total value of parts and components used in the manufacture of the SMPS.
  • For Network Interface Controllers, if Intellectual Property (IP) is resident in India for any of the items, the value of IP resident in India shall be reduced from its value in the domestic BOM.
  • The Printed Circuit Board Assembly (PCBA) of CPU(s)/GPU(s)/processor(s) using the SMT process should mandatorily be done in India.
  • The stipulations will be reviewed when the Semiconductor FAB in India is operational.
  • All other terms and conditions of the MeitY Gazette Notification F.No.W-43/4/2019-IPHW-MeitY dated 07.09.2020 remain unchanged.

Impact Analysis

Impact on Server Manufacturers

  • Manufacturers should consider the impact of IP ownership on the BOM value of Network Interface Controllers.

Impact on Component Suppliers

  • Component suppliers should focus on increasing the value addition in their products to help server manufacturers meet the local content requirements.

Impact on Government

  • The government should review the policy when the Semiconductor FAB in India is operational, as stated in the notification.

Suggested Action Items

  • All stakeholders should monitor the impact of the policy and provide feedback to the government for future revisions.

Key Entities Referenced

MeitY: Ministry of Electronics and Information Technology DPIIT: Department for Promotion of Industry and Internal Trade Public Procurement (Preference to Make in India) Order 2017: Government order promoting local manufacturing through public procurement policies. It was issued on 15.06.2017 and subsequently amended. Gazette Notification F.No.W-43/4/2019-IPHW-MeitY dated 07.09.2020: Original notification that defined the local content requirements for electronic products, including servers, which is now being amended by this notification. Semiconductor FAB in India: A semiconductor fabrication facility in India, whose operational status will trigger a review of the local content policy.
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 सी.जी.-डी.एल.-अ.-21102023-249586 CG-DxLx-xEG-I2D1H1x0x2x0 23-249586 xxxGIDExxx असाधारण EXTRAORDINARY भाग II—खण् ड 3—उप-खण्ड (ii) PART II—Section 3—Sub-section (ii) प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 4417] िई दि्ली, बृहजस्ट्पतवार, अक्ट्त बू र 19, 2023/आज‍व ि 27, 1945 No. 4417] NEW DELHI, THURSDAY, OCTOBER 19, 2023/ASVINA 27, 1945 इलेक्ट्रॉजिकी और सचू िा प्रौद्योजगकी मत्रं ालय (आईपीएचडब्ल्य ूजडवीिि) अजधसचू िा िई दि्ली, 12 अक्ट् तूबर, 2023 जवषय: दििाकं 07.09.2020 के इलक्ट्े रॉजिक उत्पाि अजधसचू िा फ़ा.स.ंडब्ल्य-ू 43/4/2019-आईपीएचडब्ल्य-ू एमईआईटीवाई के खडं सख्ं या 4.12 (सवरव ) म ेंसिं ोधि सबं धं ी। का.आ. 4591(अ).—दििांक 15.06.2017 के उद्योग और आंतररक व्यापार संवधवि जवभाग (डीपीआईआईटी) सावविजिक खरीि (मेक इि इंजडया को वरीयता) आििे 2017 जिसे दििांक 28.05.2018, 29.05.2019, 04.06.2020 और 16.09.2020 के आिेिों द्वारा यथा संिोजधत दकया गया, को आगे बढाते हुए दििांक 07.09.2020 की इलेक्ट्रॉजिकी और सूचिा प्रौद्योजगकी मंत्रालय (एमईआईटीवाई) की रािपत्र अजधसूचिा फा.सं. डब्ललयु-43/4/2049-आईपीएचडब्ल्यु- एमईआईटीवाई के द्वारा इलेक्ट्रॉजिक उत्पािों को अजधसूजचत दकया गया था। 2. सववर के मामल े में, खडं 4.12 (ख): स्ट्थािीय सामग्री की गणिा के जलए तंत्र को जिम्नािुसार संिोजधत दकया गया ह ैऔर यह तत्काल प्रभाव से लागू होगा: 6673 GI/2023 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] स्ट्थािीय सामग्री की गणिा के जलए सिं ोजधत तत्रं : सवरव की घरेल ू सामग्री जबल (बीओएम) जिम्नजलजखत ताजलका के कॉलम 1 म ें जवजिर्िवष्ट मख्ु य इिपुट की लागत के योग के बराबर होगा, बित े दक इिपुट अलग-अलग रूप से ताजलका के कॉलम 2 में जवजिर्िष्टव म्ू य वधवि आव‍यकता को पूरा करें। हालांदक, 'एड ऑि कंरोलर' के कुल म्ू य का वेटेि सवरव के कुल बीओएम के 3% से अजधक िहीं होगा। बीओएम के प्रमखु इिपटु / सवरव के म्ू य वधिव /इिपटु को घरेल ू बीओएम के रूप म ें वगीकृत करि े के जलए अपजे ित जवजिमाणव के जलए चरण स्ट्थािीय सामग्री 1 2 सववर बोडव/मिर बोड व और समे ीकंडक्ट्टसव** और सीपीयू (एस) / िीपीयू (एस)** को िाजमल करके" और बेअर सीपीय(ू एस)/िीपीय(ू एस) पीसीबी के मू्य को छोड़कर आयाजतत/घरेल ू स्ट्तर पर जवजिर्मवत भागों और संघटकों से घरेलू पीसीबी असेंबली* और परीिण मेमोरी मॉड्यूल पीसीबी असेंबली* और बअे र पीसीबी के मू्य को छोड़कर, आयाजतत/घरेल ू स्ट्तर पर जवजिर्मवत बेअर पीसीबी पर आयाजतत/घरेलू स्ट्तर पर जवजिर्मवत मेमोरी जचप्स** और कलपुिों/संघटको से घरेलू परीिण। हाडव जडस्ट्क ड्राइव/ सॉजलड स्ट्टेट आयाजतत/घरेलू स्ट्तर पर जवजिर्मवत भागों और संघटकों से घरेलू असेंबली और स्ट्टोरेि ड्राइव (एसएसडी) परीिण। कैजबिेट + एसएमपीएस आयाजतत/घरेलू स्ट्तर पर जवजिर्मवत भागों और संघटकों से घरेलू रूप से घरेलू स्ट्तर पर जवजिर्मवत कैजबिेट और एसएमपीएस का घरेलू असेंबली और परीिण, इस ित व के अध्यधीि दक "एसएमपीएस" की असेंबली म ें उपयोग दकए गए घरेल ू स्ट्तर पर जवजिर्मवत भागों और सघं टकों का मू्य न्यूितम 25% होगा ("एसएमपीएस " के जवजिमावण में उपयोग दकए िाि े वाले भागों और संघटकों का कुल म्ू य) बेयर पीसीबी आयाजतत/घरेलू जवजिर्मवत इिपटु से घरेल ूस्ट्तर पर जवजिर्मवत सहायक उपकरण (पावर केबल, आयाजतत/घरेलू स्ट्तर पर जवजिर्मवत भागों और संघटकों से घरेलू असेंबली और किेक्ट्टर, आदि) परीिण। ऐड-ऑि कंरोलर पीसीबी असेंबली* और बअे र पीसीबी के मू्य को छोड़कर, आयाजतत/घरेल ू स्ट्तर पर I. आरएआईडी जवजिर्मवत बेअर पीसीबी पर आयाजतत/घरेलू स्ट्तर पर जवजिर्मवत जचप्स** और कंरोलर/एडाप्टर कलपुिों/संघटको से घरेल ूपरीिण। II. िेटवकव इंटरफ़ेस कंरोलर (i) फाइिल असेंबली और टेसस्ट्टंग (i) घरेलू स्ट्तर पर असेम्बल/परीजित और (ii) जडिाइि और जवकास (ii) उपरोक्त आइटमों में से दकसी आइटम के जलए बौजिक सम्पिा (आईपी) अजधकार रखिे वाला व्यजक्त भारत का जिवासी हो । उपरोक्त आइटमों म ें से दकसी आइटम के जलए भारत म ें (आईपी) जिवासी के मू्य को घरेलू बीओएम म ें उसके मू्य से घटाया िाएगा। * यह आव‍यक ह ैदक सीपीयू (एस)/िीपीयू (एस)/प्रोसेसर (एस) के सप्रंटेड सर्कवट बोडव असेंबली (पीसीबीए), एसएमटी प्रदिया का उपयोग कर बेयर पीसीबी पर भागों/संघटकों को अजिवायव रूप स ेभारत में दकया िािा चाजहए। ** भारत म ेंसेमीकंडक्ट्टर फैब चालू होिे पर इसकी समीिा की िाएगी।[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 3 3. दििांक 07.09.2020 की एमईआईटीवाई की रािपत्र अजधसूचिा फ़ा.स.ं डब्ल्य-ू 43/4/2019-आईपीएचडब्ल्य-ू एमईआईटीवाई के अन्य सभी जियम और ित ें अपररवर्ततव रहगें ी। [फा. स.ं डब्ल्यू-43/4/2019-आईपीएचडब्ल्य-ू एमईआईटीवाई] आिा िांजगया, समूह समन्वयक और वैज्ञाजिक 'िी' MINISTRY OF ELECTRONICS AND INFORMATION TECHNOLOGY (IPHW Division) NOTIFICATION New Delhi, the 12th October, 2023 Subject: Amendment to Electronic Products Notification F.No.W-43/4/2019-IPHW-MeitY dated 07.09.2020 w.r.t. Clause No. 4.12 (Servers) – reg. S.O. 4591(E).— Electronic Products were notified vide Ministry of Electronics and Information Technology (MeitY) Gazette Notification F.No.W-43/4/2019-IPHW-MeitY dated 07.09.2020, in furtherance of the Department for Promotion of Industry and Internal Trade (DPIIT) Public Procurement (Preference to Make in India) Order 2017 dated 15.06.2017, as amended by Orders dated 28.05.2018, 29.05.2019, 04.06.2020 and 16.09.2020. 2. In case of Servers, Clause 4.12 (B): Mechanism for calculation of local content is amended as under and will be applicable with immediate effect: Revised Mechanism for calculation of local content: The domestic Bill of Material (BOM) of Server would be the sum of the cost of main inputs as specified in Column 1 of the following table, provided the inputs individually satisfy the value addition requirement specified in Column 2 of the table. However, the weightage of total value of 'Add on Controller' shall not exceed 3% of the total BOM of the Server. Main inputs in BOM/ stages for Value addition /local content required for the input to be classified manufacture of Server as domestic BOM 1 2 Server Board/ Mother Board and CPU(s)/ Domestic PCB Assembly* and testing from imported/ domestically GPU(s) manufactured parts and components, including the value of Semiconductors** and CPU(s)/ GPU(s)** and excluding the value of bare PCB. Memory Module Domestic PCB Assembly* and testing from imported/ domestically manufactured memory chips** and parts/ components on imported/ domestically manufactured bare PCB, excluding the value of bare PCB. Hard Disk Drive/ Solid State Storage Domestic assembly and testing from imported/ domestically Drive (SSD) manufactured parts and components. Cabinet + SMPS Domestically manufactured Cabinet and domestic assembly and testing of SMPS from imported / domestically manufactured parts and components, subject to the condition that value of domestically manufactured parts and components used in the assembly of “SMPS” will be minimum 25% (of the total value of parts and components used in the manufacture of “SMPS”). Bare PCB Domestically manufactured from imported/ domestically manufactured inputs. Accessories (Power Cables, Connectors, Domestic assembly and testing from imported/ domestically etc.) manufactured parts and components. Add-on Controllers Domestic PCB Assembly* and testing from imported/ domestically i. RAID Controller/Adapter manufactured chips** and parts/ components on imported/ domestically4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] ii. Network Interface Controllers manufactured bare PCB, excluding the value of bare PCB. (i) Final Assembly and Testing (i) Domestically assembled/ tested and (ii) Design and Development (ii) Intellectual Property (IP) resident in India for any of the above items. The value of IP resident in India for any of the above items shall be reduced from its value in the domestic BOM. * It is essential that the Printed Circuit Board Assembly (PCBA) of the CPU(s)/ GPU(s)/ processor(s), parts/ components on the bare PCB using the SMT process should mandatorily be done in India ** This shall be reviewed when the Semiconductor FAB in India is operational. 3. All other terms and conditions of MeitY Gazette Notification F.No.W-43/4/2019-IPHW-MeitY dated 07.09.2020 remain unchanged. [F. No. W-43/4/2019-IPHW-MeitY] ASHA NANGIA, Group Coordinator & Scientist 'G' Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research