Date: 2026-02-03Category: Extra OrdinaryState: Union GovernmentCountry: India
Bureau of Indian Standards hereby makes the following AMENDMENT to the NOTIFICATION of Government of India under the Ministry of Consumer Affairs, Food and Public Distribution
**Executive Summary**
This document is a corrigendum issued by the Bureau of Indian Standards (BIS), dated February 2, 2026, regarding amendments to notifications related to Indian standards. It specifically concerns an amendment to the schedule regarding wrought aluminum and aluminum alloy standards. The original notification (HQ-PUB013/1/2020-PUB-BIS (1396)) was dated January 1, 2026, and published on January 6, 2026.
**Key Points / Main Content**
* **Amendment:**
* The corrigendum adds IS 1285: 2023, "Wrought Aluminium and Aluminium Alloys - Extruded Round Tube and Hollow Sections for General Engineering Purposes - Specification (Fourth Revision)," after IS 733 - 1983 in the schedule.
* IS 733 - 1983 is the Specification for Wrought Aluminium and Aluminium Alloy Bars, Rods and Sections (For General Engineering Purposes) (Third Revision).
* **Authority:**
* The corrigendum is issued by the BIS under sub-rule (1) of Rule 15 of the Bureau of Indian Standards Rules, 2018.
**Impact Analysis**
* **Stakeholder:** Manufacturers and users of aluminum and aluminum alloy products.
**Impact:** They must adhere to the updated standards, including IS 1285:2023, for relevant products.
**Action Required:** Review and comply with the new standard IS 1285: 2023 when manufacturing or using extruded round tube and hollow sections of wrought aluminum and aluminum alloys.
Key Entities Referenced
Bureau of Indian Standards (BIS): The primary regulator issuing the corrigendum to amend notifications regarding Indian standards.
Bureau of Indian Standards Rules, 2018: The legal framework under which the Bureau of Indian Standards operates and issues notifications.
IS 1285 : 2023: Indian Standard for Wrought Aluminium and Aluminium Alloys - Extruded Round Tube and Hollow Sections for General Engineering Purposes – Specification (Fourth Revision)
IS 733 - 1983: Indian Standard for Wrought Aluminium and Aluminium Alloy Bars, Rods and Sections (For General Engineering Purposes) (Third Revision)
Ministry of Consumer Affairs, Food and Public Distribution (Department of Consumer Affairs): The Government of India ministry to which the Bureau of Indian Standards is responsible.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एलxx.x-GअID.-H0x3xx0 22026-269797
CG-DLxx-xEG-I0D3E0x2x2x0 26-269797
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 72] नई दिल्ली, मगं लिार, फरिरी 3, 2026/माघ 14, 1947
No. 72] NEW DELHI, TUESDAY, FEBRUARY 3, 2026/MAGHA 14, 1947
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल े जिभाग)
िजु िपत्र
नई दिल्ली, 2 फरिरी, 2026
सिं भ:भ HQ-PUB-BIS (1415).—भारतीय मानक ब्यूरो एतिद्वारा भारत के रािपत्र में जनचे दिए गए सन्िभों म ें
भारतीय मानक ब्यरू ो जनयम, 2018 के जनयम 15 के उपजनयम (1) के अनुसरण में भारत के रािपत्र भाग III, खडं 4 म ें
भारतीय मानक ब्यूरो उपभोक्त ा मामले, खाद्य एिं सािभिजनक जितरण मंत्रालय, उपभोक्त ा मामले जिभाग के अंतगभत भारत
सरकार की अजधसूचनाओं म ेंजनम्नजलजखत सिं ोधन करता ह:ै
1) सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (1396) दिनाकं 01 िनिरी 2026 (प्रकाजित दिनाकं 06 िनिरी 2026)
अनुसूची के क्रम संख्या 01, कॉलम (4) म ें — ‘आई एस 733 - 1983 जपटिााँ एल्युमीजनयम और एल्युमीजनयम जमश्रधात ु
बासभ, छड़ ें और सेक्िन के जलए जिजिजि (सामान्य इंिीजनयररंग उद्देश्यों के जलए) (तीसरा पुनरीक्षण) के पश्चात आई एस
1285 : 2023 सामान्य इंिीजनयररंग अनप्रु योगों हते ुजपटिा ाँएल्यमू ीजनयम एि ंएल्यमू ीजनयम जमश्र धातओंु स ेबनी एक्सटूडेड
गोल नजलया ाँएि ंखोखल ेसक्े िन — जिजिजि (चौथा पनु रीक्षण ) को िोड़ें|’
जचत्रा गुप् ता, िैज्ञाजनक िी एि ंउप महाजनिेिक (हॉलमार्किंग और रेननंग)
[जिज्ञापन-III/4/असा./647/2025-26]
716 GI/2026 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
CORRIGENDUM
New Delhi, the 2nd February, 2026
Ref: HQ-PUB-BIS (1415).—Bureau of Indian Standards hereby makes the following AMENDMENT to
the NOTIFICATION of Government of India under the Ministry of Consumer Affairs, Food and Public Distribution
(Department of Consumer Affairs) in Part III, Section 4 of the Gazette of India in pursuance of sub-rule (1) of Rule 15
of the Bureau of Indian Standards Rules, 2018.
1) Ref no. HQ-PUB013/1/2020-PUB-BIS (1396) dated 01 January 2026 (Published on 06 January 2026)
Sl No. 01, column (4) of schedule — ‘Add IS 1285 : 2023 Wrought Aluminium and Aluminium Alloys — Extruded
Round Tube and Hollow Sections for General Engineering Purposes — Specification (Fourth Revision) after IS 733 -
1983 Specification for Wrought Aluminium and Aluminium Alloy Bars, Rods and Sections (For General Engineering
Purposes) (Third Revision) ’.
CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training)
[ADVT.-III/4/Exty./647/2025-26]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.