Home India Bureau of Energy Efficiency In exercise of the powers conferred by clause i of sub secti...
Date: 2022-08-25 Category: Extra Ordinary State: Union Government Country: India

In exercise of the powers conferred by clause i of sub section 2 of section 58 read with clause n of sub section 2 of section 13 of the Energy Conservation Act

Issued by Bureau of Energy Efficiency · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

## Report on Amendment to the Bureau of Energy Efficiency Particulars and Manner of their Display on Labels of Distribution Transformer Regulation 2009 **1. Executive Summary:** This report analyzes a set of amendments to the Bureau of Energy Efficiency (BEE) Particulars and Manner of their Display on Labels of Distribution Transformer Regulation 2009. The core purpose of these amendments is to revise and refine the labeling scheme for distribution transformers, aiming to provide clearer and more accurate information to consumers regarding energy efficiency. Key changes include updated definitions, revised procedures for label application and verification, and adjustments to the terms and conditions for displaying labels. The amendments affect manufacturers, importers, sellers, and traders of distribution transformers. **2. Introduction:** This report provides an informative overview and analysis of recent amendments to the Bureau of Energy Efficiency (BEE) Particulars and Manner of their Display on Labels of Distribution Transformer Regulation 2009, as published in the Gazette of India on August 25, 2022. This analysis is based solely on the provided policy text. **3. Policy Overview:** * This report concerns amendments to the Bureau of Energy Efficiency Particulars and Manner of their Display on Labels of Distribution Transformer Regulation 2009. * The core objectives of these amendments, as inferred from the text, are to: * Update and clarify the regulations surrounding the display of energy efficiency labels on distribution transformers. * Improve the process for manufacturers and importers to obtain permission to affix labels. * Enhance the verification process to ensure the accuracy of displayed information. * Provide clearer information to consumers regarding the energy efficiency of distribution transformers. **4. Background and Rationale:** The amendments appear to address the need for a more robust and refined labeling system for distribution transformers. Based on the amendment text, this may be due to: * The existing regulations needing updates to reflect technological advancements or changes in energy consumption standards. * A desire to improve the clarity and effectiveness of the labeling system for consumers. * The necessity to strengthen the verification process to ensure compliance and accuracy in labeling. * A need to streamline the application and permission process for label affixation. **5. Key Provisions / Changes:** The provided text introduces several key changes to the existing regulations: * **Updated Definitions:** The amendment includes updated definitions for key terms such as "Act," "Distribution Transformer," "Label," "Label Period," "Permittee," "Star Rating," "Trader," and "Schedule," ensuring clarity and consistency in the application of the regulations. * **Label Particulars:** The required information to be displayed on the label includes the logo of the Bureau of Energy Efficiency, equipment type, manufacturer, model and manufacturing year, transformer capacity, voltage, total losses at 50% and 100% loading, a unique label series code, star level, and label period. * **Label Display Deadline:** A six-month timeframe from the effective date of the amended regulations is given to display a label with all the necessary particulars. * **Permission Process:** * **Brand Registration:** Requires separate registration for each brand with a security fee (one lakh rupees, or twenty-five thousand for small-scale industries). * **Model Registration:** Requires an application fee per model. * Detailed application forms (Form I A and I B) are introduced, specifying required documentation. * **Grant of Permission:** The Bureau may register the brand and grant permission for affixing the label in electronic form subject to the compliance with all requirements. The Bureau shall maintain a register in Form III. * **Label Fee:** A labeling fee of hundred rupees for each label affixed on the distribution transformer. **6. Target Audience and Stakeholders:** The primary target audience and stakeholders for these amendments include: * Manufacturers and importers of distribution transformers. * Traders and sellers of distribution transformers (including shopkeepers, manufacturers, and permittees). * Consumers of distribution transformers. * The Bureau of Energy Efficiency (BEE) and its designated agencies. * State Designated Agencies. **7. Implementation Aspects (Inferred):** Based on the provided text, the following implementation aspects can be inferred: * **Responsible Agency:** The Bureau of Energy Efficiency (BEE) is the primary responsible body for implementing and enforcing these amendments. * **Timelines:** There is a six-month timeline for displaying labels with the required particulars. * **Procedures:** * Companies must register their brands and models with the BEE. * Detailed application processes are outlined using specific forms (Form I A, Form I B, Form II A, Form II B, Form III, Form IV, Form V, Form VI). * Verification of compliance will be conducted by the BEE or its designated agencies. * Non-compliance can lead to corrective actions, withdrawal of permissions, and publication of non-compliant entities. **8. Expected Outcomes / Impact of Changes:** The likely intended outcomes of these specific changes are: * Improved accuracy and reliability of energy efficiency labeling on distribution transformers. * Increased transparency and consumer awareness regarding the energy performance of these products. * Enhanced compliance with energy efficiency standards by manufacturers and importers. * Streamlined processes for label application and verification, reducing administrative burden. * Facilitation of informed purchasing decisions by consumers, leading to greater adoption of energy-efficient distribution transformers. **9. Conclusion:** The amendments to the Bureau of Energy Efficiency Particulars and Manner of their Display on Labels of Distribution Transformer Regulation 2009 represent a significant effort to enhance the effectiveness and clarity of the labeling scheme for distribution transformers. The changes aim to ensure accurate and accessible information for consumers, promoting energy efficiency and compliance within the industry. By streamlining application processes and strengthening verification mechanisms, these amendments are poised to have a positive impact on the energy efficiency of distribution transformers and consumer awareness.

Key Entities Referenced

NEW DELHI: Place of publication of the gazette notification. AUGUST: Month of publication of the gazette notification. Energy Conservation Act, 2001: The Act under which the Bureau of Energy Efficiency is exercising its powers to amend regulations. Bureau of Energy Efficiency: An organization that proposes to amend the Bureau of Energy Efficiency Particulars and Manner of their Display on Labels of Distribution Transformer Regulation 2009. Bureau of Energy Efficiency Particulars and Manner of their Display on Labels of Distribution Transformer Regulation 2009: The regulation that the Bureau of Energy Efficiency proposes to amend. Ministry of Power: The ministry to which the Bureau of Energy Efficiency reports. R.K.Puram, New Delhi: Location of Bureau of Energy Efficiency Distribution Transformer: An appliance specified in the notification under clause b of section 14 of the Act National Accreditation Board for Testing and Calibration Laboratories: An accreditation body for independent laboratories that conduct verification testing of distribution transformers. State Designated Agencies: Agencies to which the Bureau of Energy Efficiency will intimate regarding non-compliance and directions issued to permittees. Government of India Press, Ring Road, Mayapuri, New Delhi: Place of printing of the document
Official Source Record View Original Source →
See Full Document Text
रजजस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 xxxGIDHxxx सी.जी.-डी.एलxx.x-GअID.-E2x6x0x 82022-238404 CG-DL-E-26082022-238404 असाधारण EXTRAORDINARY भाग III—खण् ड 4 PART III—Section 4 प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 412] नई ददल्ली, बृहस्ट्व जतअनार, अगस्ट्त 25, 2022/भार 3, 1944 No. 412] NEW DELHI, THURSDAY, AUGUST 25, 2022/BHADRA 3, 1944 ऊजा ादक्षता ब्यूरो अजधसचू ना नई ददल्ली, 25 , 2022 स.ं बीईई/एस एंड एल/डीटी/01/22-23.—ऊजाा दक्षता ब्यूरो (ब् यूरो), द्वारा केन्‍द रीय सरकार के वूअना अननमोदन से, ऊजाा संरक्षण अजधजनयम, 2001 (2001 का 52) की धारा 58 की उवधारा (2) के खण्ड (ज) के साथ वठठत धारा 13 की उवधारा (2) के खण्ड (द) द्वारा प्रदत्त िजियों का प्रयोग करते हुए (जडस्ट्रीब्यूिन रांसफॉमार के लेबल वर जअनअनरण और उनके प्रदिान की प्रजअनजध) जअनजनयमन 2009 में संिोधन का प्रस्ट्ताअन दकया जाता ह,ै प्रस्ट्ताजअनत मसौदा संिोधन एतदद्वारा इससे संभाजअनत रूव से प्रभाजअनत सभी व्यजियों की सूचना के जलए भारत के राजवत्र, असाधारण में प्रकाजित दकए जाते ह ैं जैसा दक कजथत अजधजनयम की धारा 58 की उवधारा (1) द्वारा यथा: अवेजक्षत प्रकाजित दकया जाता है; और एतदद्वारा सूचना दी जाती ह ै दक उि प्रारूव जअनजनयमों वर भारत के राजवत्र, असाधारण में उनके प्रकािन की तारीख से तीस ददनों की अअनजध की समाजि वर या उसके बाद जअनचार दकया जाएगा; आक्षेव या सनझाअन, यदद कोई हो, महाजनदिे क, ऊजाा दक्षता ब् यूरो, जअनद्यनत मंत्रालय, चौथा तल, सेअना भअनन, रामकृष् ण वनरम, सेक् टर-1, नई ददल् ली-110066 को प्रेजित दकए जा सकते ह ैंऔर ब्यूरो के ई-मेल dg-bee@nic.in वर भी भेजे जा सकते हैं; ऊजाा दक्षता ब्यूरो द्वारा उवरोि वैरा 1 में जनर्ददष्ट तीस ददनों की अअनजध की समाजि से वहले उि मसौदा जअनजनयमों के संबंध में व्यजियों से प्राि होने अनाली आवजत्तयों या सनझाअनों वर जअनचार दकया जाएगा। 1. सजं क्षि नाम और प्रारंभ- (1) इन जअनजनयमों का संजक्षि नाम ऊजाा दक्षता ब्यूरो (जडस्ट्रीब्यूिन रांसफॉमार के लेबल वर जअनअनरण और उनके प्रदिान की प्रजअनजध) जअनजनयम, 2022 ह।ै (2) ये जअनजनयम भारत के राजवत्र, असाधारण में इनके प्रकािन की तारीख से लागू होंगे। 2. वठरभािा :- (1) इन जअनजनयमों म,ें जब तक संदभा में अन्‍द यथा अवेजक्षत न हो,- (क) “अजधजनयम” से तात् वया ऊजाा संरक्षण अजधजनयम, 2001 (2001 का 52) ह;ै 5749 GI/2022 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] (ख) "जडस्ट् रीब् यूिन रांसफामार" का अथा अजधजनयम की धारा 14 के खंड (बी) के तहत अजधसूचना में जनर्ददष्ट एक उवकरण है; (ग) “प्रवत्र” से तात् वया इन जअनजनयमों के साथ संल्‍न प्रवत्र है; (घ) “लेबल” से तात् वया जडस्ट् रीब् यूिन रासं फामार वर जचवकाई गई अथअना प्रदशितित जलजखत, मनदरत, जचजननत, मनहर लगी या ग्रादफक सामग्री ह;ै (ड.) "लेबल की अअनजध" का अथा ह ैसावेक्ष ऊजाा दक्षताओं की अनैधता अअनजध या हाजन के मानक जो धारा 14 के खंड (क) के तहत केंर सरकार द्वारा लोडडग वर अजधसूजचत जडस्ट् रीब् यूिन रांसफामरा के 50 प्रजतित और 100 प्रजतित कनल ननकसान ह ै और यदद सावेक्ष ऊजाा दक्षता या हाजन मानकों की अनैधता अअनजध की समाजि अअनजध अजधसूजचत नहीं की गई है, इसे तब तक अनैध माना जाएगा जब तक दक केंर सरकार द्वारा इसके जलए नए मान अजधसजू चत नहीं दकए जाते हैं; (च) “अननज्ञाधारक” से तात् वया ससे ्‍ यजि या ससी एजेंसी से ह ैजजसे जअनजनयम 7 के तहत लेबल जचवकाने के जलए अननज्ञा दी गई है; (छ) "स्ट्टार रेटटग या स्ट्टार लेअनल" का अथा है अजधजनयम की धारा 14 के खंड (क) के तहत जडस्ट् रीब् यूिन रांसफामार के लेबल वर ऊजाा दक्षता का ग्रेड जजसमें केंर सरकार द्वारा अजधसूजचत 50 प्रजतित और 100 प्रजतित लोडडग के आधार वर सावेक्ष ऊजाा दक्षता या हाजन का मानक प्रदशितित दकया जाता है, जो जडस्ट् रीब् यूिन रांसफामार के लेबल वर जडस्ट् रीब् यूिन रांसफामार की 50 प्रजतित और 100 प्रजतित लोडडग वर होने अनाला कनल ननकसान है; (ज) लेबल लगे जडस्ट् रीब् यूिन रांसफॉमार के संबंध में “्‍ यावारी अथअना जअनरेता” से तात् वया उस ्‍ यजि से ह ै जो सस े जडस्ट् रीब् यूिन रांसफॉमार की जबरी अथअना जडस्ट् रीब् यूिन करता है और इसमें ससे दकन ानदार, ्‍ यावारी, जअनजनमााता और जडस्ट् रीब् यूिन रांसफॉमार वर लेबल जचवकाने के जलए अननमजत प्राप्त अननज्ञाधारक िाजमल हैं। (i) "अननसूची" का अथा इन जअनजनयमों से जनडी अननसूची है; (2) यहां इसमें प्रयनक् त जो िब् द और अजभ्‍ यजियां अवठरभाजित हैं लेदकन अजधजनयम में वठरभाजित की गई हैं, उनका अजधजनयम म ें उन्‍द ह ेंरमि: ददया गया आिय ही होगा। 3. लबे ल वर प्रदशितित दकए जान ेअनाला जअनअनरण- (1) प्रत् येक जडस्ट् रीब् यूिन रांसफॉमार वर, इसके लेबल वर जनम् नजलजखत जअनअनरण प्रदशितित दकया जाएगा, नामत:- (क) ऊजाा दक्षता ब् यूरो का प्रतीक जचनन; (ख) उवकरण; (ग) प्रकार; (घ) मेक / जनमााता / आयातक; (ङ) मॉडल / जनमााण अनिा; (च) केअनीए में रांसफामार क्षमता; (छ) केअनी में अनोल्टेज; (ज) अनॉट में 50 प्रजतित लोडडग वर कनल ननकसान; (झ) अनॉट में 100 प्रजतित लोडडग वर कनल ननकसान; (ञ) जअनिेि श्ृंखला कोड; (ट) स्ट् टार स्ट्त र; (ठ) लेबल की अअनजध; (2) लेबल का जडजाइन, रंग, आकार और सामग्री इन जअनजनयमों के साथ संल्‍न अननसूची में यथा: जअनजनर्ददष् ट होगा। 4. लेबलों के प्रदिना के जलए समय-सीमा- (1) जअनजनयम 3 में जअनजनर्ददष् ट सभी जअनअनरण अनाला लेबल इन जअनजनयमन के लागू होने की तारीख से छह माह की अअनजध के अंदर प्रत् येक जडस्ट् रीब् यूिन रांसफॉमार वर प्रदशितित दकया जाएगा। (2) केन्‍द र सरकार द्वारा अजधजनयम की धारा 14 के खण् ड (क) के तहत अजधसूजचत ऊजाा खवत मानकों के आरंभ होने वर और आरंभ होने से, प्रत् येक अननज्ञाधारक या ्‍ यावारी या जअनरेता स जन नजित करेगा दक- (क) जवछले ऊजाा खवत मानकों के साथ जडस्ट् रीब् यूिन रांसफॉमार का उत्वादन नहीं करेगा;[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 3 (ख) जडस्ट् रीब् यूिन रांसफॉमार वर ऊजाा खवत मानक के साथ स्ट्टार स्ट्तर और लेबल अअनजध और ऊजाा खवत मानकों के साथ जडस्ट् रीब् यूिन रांसफॉमार के जनमााण अनिा को प्रदशितित करेगा; (ग) डीलरों, खनदरा ्‍ यावाठरयों को जानकारी दने े के जलए उनको जिजक्षत करने के साथ ही उवभोक् ताओं को जिजक्षत करने के जलए अवेजक्षत प्रचार-प्रसार सजहत सभी प्रारंजभक कदम उठाए गए ह ैं और तीन महीने वहले काराअनाई की जाएगी। 5. लेबल प्रदशितित करन ेकी जअनजध- (1) प्रत्येक जडस्ट् रीब् यूिन रांसफामार वर, लेबल वर जनम्नाननसार मनहर लगाई जाएगी, अथाात्:- (i) लेबल को इकाई के सामने के जडस्ट् प्ल े वर जचवकाया जाएगा और यह जअनजनयम 3 के उव-जअनजनयम (2) में जनर्ददष्ट अननसार आसानी से ददखाई दने ा चाजहए और अननज्ञाधारक यह सनजनजित करेगा दक लेबल प्रत्येक वंजीकृत इकाई या मॉडल वर वहचान के उद्देश्य से, जबरी या दकराए की जगह वर प्रदशितित होता ह ै और लेबल को इकाई या मॉडल आअनरण के बाहरी अनाले जहस्ट्से में मनदरत दकया या जचवकाया जाएगा। (ii) जडस्ट् प् ले न करने अनाली इकाइयों के जलए, लेबल मनदरत दकया जा सकता ह ैया इसे बाहरी आअनरण वर जचवकाया जा सकता ह ै और जब इकाई या मॉडल को उसकी वैकेडजग से बाहर जनकाल जलया जाता ह ै तो यह लेबल इकाई या मॉडल से जनडा हो सकता ह ैया लेबल को ग्राहक या प्रयोक् ता को ददए गए दस्ट्ताअनेीीकरण के एक भाग के रूव में िाजमल दकया जा सकता है। 6. लेबल प्रदशितित करन ेकी अनज्ञन ा-(1) ब् यूरो की वूअना अननमजत के जबना जडस्ट् रीब् यूिन रांसफॉमार वर कोई स्ट् टार नहीं जचवकाया जाएगा। (2) कंवनी वंजीकरण - ब्यूरो की अननमजत प्राि करने के प्रयोजनों के जलए, प्रत्येक ब्ांड को एक लाख रुवए के लेबल प्रजतभूजत िनल्क के साथ, अलग से वंजीकृत दकया जाएगा जैसा दक प्रवत्र I - (क) में जनर्ददष्ट दकया गया ह,ै भनगतान के इलेक्रॉजनक मोड द्वारा दये ह ै: बिते दक लघन उद्योग के मामले में, लेबल प्रजतभूजत िनल्क केअनल वच्चीस हजार रुवए होगा। (3) मॉडल वंजीकरण- उव-जअनजनयम (2) के तहत अननज्ञावी के प्रत्येक आअनेदन के साथ- (क) भनगतान के इलेक्रॉजनक मोड द्वारा दये प्रजत मॉडल दो हजार रुवए का आअनेदन िनल्क; तथा (ख) प्रवत्र-1 – (ख) में यथा जअनजनर्ददष् ट दस्ट् ताअनेज 7. अनज्ञन ा प्रदान करना - (1) जअनजनयम 6 के तहत कोई आअनेदन प्राप्त होने वर और इससे संतनष् ट होने वर दक इसमें दी गई सभी अवेक्षाओं का वालन दकया गया है, ब् यूरो मानक और लेबडलग वर इस मैननअल में जनर्ददष् ट के रूव में अअनजध के अंदर, जअनजनयम 8 में यथा: जअनजनर्ददष् ट जनयमों एअनं िततों के अ्‍य धीन के जलए अननज्ञा प्रदान कर सकता ह।ै (क) प्रवत्र II-(क) में इलेक्रॉजनक रूव में ब्ांड वंजीकृत करना; तथा (ख) प्रवत्र II-(ख) में इलेक्रॉजनक रूव में जडस्ट् रीब् यूिन रांसफामार वर लेबल लगाने की अननमजत दने ा। (2) ब् यूरो द्वारा प्रवत्र-III में रजजस्ट्ट र का अननरक्षण दकया जाएगा और इसमें अननज्ञाधारक का नाम प्रजअनष् ट दकया जाएगा; (3) उव-जअनजनयम (1) के तहत इस प्रकार प्रदत्त अननज्ञा उस अअनजध तक मान्‍द य होगी जो केन्‍द रीय सरकार द्वारा धारा 14 के खण् ड (क) के तहत यथा: अजधसूजचत ऊजाा खवत मानक द्वारा स्ट्ट ार स्ट्त र के जलए जअनजनर्ददष् ट की गई है; (4) अननज्ञाधारक द्वारा स्ट्टार रेटटग योजना के संिोधन के मामले म,ें अननमजत के नअनीनीकरण का आअनेदन इसकी समाजि से एक महीने बाद नहीं दकया जाएगा और इसके साथ ऊजाा दक्षता ब्यूरो, नई ददल्ली के वक्ष में इलेक्रॉजनक मोड में दये एक हजार रुवए का िनल्क होगा। स्ट्टार रेटटग योजना के जअनस्ट्तार के मामले में, उि नअनीनीकरण के एक हजार रुवए के िनल्क से छूट दी जाएगी। (5) अनैधता की अअनजध समाप्त होने के बाद दकसी आअनेदन का नअनीकरण नहीं दकया जाएगा और अननज्ञावी को नया आअनेदन वत्र दने ा होगा; (6) उव- जअनजनयम (4) के तहत नअनीकरण के जलए आअनेदन-वत्र जमलने वर और सभी अवेक्षाएं वूरी होने के संबंध में संतनष् ट होन े वर, ब् यूरो उक् त आअनेदन प्राप्त होने की तारीख से एक माह की अअनजध के अंदर प्रवत्र-II में अननज्ञा का नअनीकरण कर सकता है; (7) जो अननज्ञाधारक उस तारीख से जडस्ट् रीब् यूिन रांसफॉमार के मौजूदा मॉडल वर लेबल जचवकाने को जारी रखने की अननज्ञा की मांग करता है, जजस तारीख से संिोजधत स्ट्ट ार स्ट्त र लागू हुआ है, केअनल प्रवत्र IV में एक घोिणा प्रस्ट् तनत करेगा; (8) यदद जडस्ट् रीब् यूिन रांसफॉमार के नए मॉडल की योजना संिोजधत स्ट् टार स्ट् तर के साथ ताल-मेल जबठाकर िनरू करने की योजना ह ै तो अननज्ञाधारक को नया लेबल जचवकाने की अननज्ञा लेगा और ससी अननज्ञा के जलए आअनेदन संिोजधत स्ट् टार स्ट् तर के लागू होने से छह माह वूअना दकया जाए;4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] 8. लेबल वर जअनअनरण प्रदशितित करन ेके जलए जनयम और ित:ें- प्रत् येक अननज्ञाधारक और ्‍ यावारी एअनं जअनरेता लेबल वर जअनअनरण प्रदशितित करने में जनम् नजलजखत जनयमों एअनं िततों का वालन करेगा, नामत:- (क) जडस्ट् रीब् यूिन रांसफॉमार के लेबल वर प्रदशितित स्ट् टार स्ट् तर अजधजनयम की धारा 14 के खण् ड (क) के तहत केंर सरकार द्वारा अजधसूजचत जडस्ट् रीब् यूिन रांसफॉमरा के जलए ऊजाा खवत मानकों के अननरूव होंगे; (ख) यह लेबल जडस्ट् रीब् यूिन रांसफॉमार के ससे मॉडलों वर ही जचवकाया जाएगा जजसके जलए अननज्ञा ली गई है; (ग) लेबल को अननज्ञाधारक की लागत वर मनदरत और जडस्ट् रीब् यूिन रांसफॉमार वर जचवकाया जाएगा; (घ) अननज्ञाधारक, ्‍ यावारी और जअनरेता यह सनजनजित करेगा दक जडस्ट् रीब् यूिन रांसफॉमार वर लेबल वर प्रदशितित स्ट् टार स्ट् तर हर समय बना रहगे ा; (ङ) अननज्ञाधारक जअनजनयम 9 में यथा: जअनजनर्ददष् ट लेबल िनल् क का भनगतान करेगा; (च) अननज्ञाधारक ब् यूरो को जअनअनरण मनहयै ा कराएगा जजसमें लेबल लगे उवकरणों को बनाने का ब् यौरा और जअनत्तीय अनिा की प्रत् येक जतमाही के अंत में जनम्न जलजखत माह के अंदर प्रत् येक जतमाही के जलए दये प्रोद्भूत ले बडलग िनल् क का जअनअनरण हो; (छ) अननज्ञाधारक, ब् यूरो को अवने लेबल लगे उत् वादों की जबरी के जलए जनयनक्त प्रत् येक अनिा 30 अप्रैल को अजधकृत जअनतरकों, डीजरों और थोक जअनरेताओं एअनं जअनरेताओं की सूची मनहयै ा कराएगा; (ज) अननज्ञाधारक, ्‍ यावारी और जअनरेता ससे अन्‍द य जनयमों एअनं िततों का वालन करेंगे जो ब् यूरो द्वारा, मानक और लेबडलग के संबंध में ब् यूरो की जनयम वनजस्ट्तका में जनजहत जनयमों एअनं िततों सजहत जअनजनर्ददष् ट दकए गए हों; 9. लेबल िल्न क- (1) प्रत् येक अननज्ञाधारक, ब् यूरो को जडस्ट् रीब् यूिन रांसफॉमार वर प्रत् येक जचवकाए गए लेबल के जलए सौ रुवए के िनल् क का भनगतान करेगा। (2) उव-जअनजनयम (1) के तहत जअनजनर्ददष् ट लेबल िनल् क, प्रत् येक जअनत्तीय अनिा की अंजतम तारीख से एक माह के अंदर अनाशितिक तौर वर दकया जाएगा; बिते दक यथा जअनजनर्ददष् ट अअनजध के अंदर लेबल िनल् क का भनगतान न करने वर, ब् यूरो जअनजनयम 6 के उव-जअनजनयम (3) के खण् ड (ख) के तहत प्रजतभूजत जमानत राजि से इस वर प्रजतअनिा दस प्रजतित की दर से इस वर ब् याज का भनगतान करेगा और यदद इसे जमा दकए जाने की अंजतम तारीख से एक माह के अंदर वूरा लेबडलग िनल् क अनसूल नहीं दकया जाता, ब् यूरो अननज्ञाधारक को प्रदत्त सभी अननज्ञा प्रदान कर सकता है और अननज्ञाधारक का नाम चूककताा के रूव में समाचार वत्र में प्रकाजित कर सकता ह।ै 10. लेबल प्रजतभजू त िल्न क का प्रत्य वणा :- जअनजनयम 9 के उव-जअनजनयम (2) के प्राअनधान के अधीन, अननज्ञाधारक को जडस्ट् रीब् यूिन रांसफॉमार का जअनजनमाणा बंद करने वर लेबल प्रजतभूजत िनल्क के प्रत् यवाण का अजधकार होगा। 11. ब् यूरो द्वारा सत्य ावन- (1) ब् यूरो अथअना इसकी नामोदद्दष् ट एजेंसी, स्ट् अनयमेअन अथअना इसे जिकायत प्राप्त होने वर, यह सनजनजित करन े के जलए सत् यावन करेगा दक जडस्ट् रीब् यूिन रांसफॉमार इसके लेबल वर प्रदशितित स्ट् टार स्ट् तर और अन्‍द य जअनअनरण के अननरूव ह ै और दक यह अननज्ञा के अन्‍द य जनयमों एअनं िततों के अननवालन में ह।ै (2) सत् यावन के प्रयोजन के जलए, ब् यूरो अथअना जअनजनमााता सनजअनधा से इसकी नामोदद्दष् ट एजेंसी, द्वारा जैसे यह उजचत समझे, भण् डारगृह अथअना फनटकर जअनरय केन्‍द र से यादजृक छक तौर नमूने एकत्र करेगा; और (क) अनाइंडडग प्रजतरोध वरीक्षण का मावन (ख) प्रजतबाधा अनोल्टेज या िॉटा सर्दकट प्रजतबाधा और लोड हाजन का मावन (ग) नो-लोड हाजन और अनतामान वरीक्षण का मावन (घ) तावमान अनृजि वरीक्षण और (ड.) िॉटा सर्दकट वरीक्षण। (3) जहां उव- जअनजनयम (1) के तहत जिकायत प्राप्त होने वर, ब् यूरो द्वारा जांच और अंिांकन प्रयोगिालाओं हते न राष् रीय वरीक्षण प्रत् यायन बोडा द्वारा जअनजधअनत प्रत् याजयत स्ट् अनतंत्र प्रयोगिाला के जडस्ट् रीब् यूिन रांसफामार की जांच को चननौती दके र सत् यावन करना अवेजक्षत ह,ै अननज्ञाधारक को ससे वरीक्षण के जनष् वादन के जलए प्रवत्र 5 में नोठटस जारी दकया जाएगा और जिकायतकताा को ब् यूरो के वास नमूना लागत, वरीक्षण, वठरअनहन संबंधी खचा और अन्‍द य आकजस्ट्मक ्‍ यय, ससी समयाअनजध में जमा कराने की मांग करेगा जो ब् यूरो द्वारा जअनजनधााठरत की गई हो और यदद जांच वरीक्षण के तहत जलए गए नमूने जअनफल रहते हैं, ब् यूरो को नमूने लेने, नमूने के वठरअनहन और जांच प्रभारों की लागत के जलए सभी ्‍ यय की प्रजतवूशितत अननज्ञाधारक द्वारा अनहन की जाएगी और ब् यूरो उजल्लजखत ्‍ यय की प्रजतवूशितत जिकायतकताा को करेगा और जहां उवकरण चननौती वरीक्षण वर खरे उतरते हैं, तब जिकायतकताा द्वारा जमा कराए गए ्‍ यय जब् त कर जलए जाएंगे; (4) जहां जांच के जलए जडस्ट् रीब् यूिन रांसफॉमार के नमूने स्ट्अन यमेअन वरीक्षण अथअना चननौती वरीक्षण के दौरान वरीक्षण में जअनफल रहते ह,ैं अननज्ञाधारक को एक अन्‍द य अअनसर ददया जाएगा और ब् यूरो, अननज्ञाधारक की लागत वर राष् रीय वरीक्षण और अंिांकन प्रयोगिाला बोडा द्वारा जअनजधअनत प्रत् याजयत स्ट् अनतंत्र प्रयोगिाला में प्रथम जांच में प्रयनक्त जडस्ट् रीब् यूिन रांसफॉमार के दो गनने वठरमाण में दसू रा वरीक्षण करेगा। ब्यूरो उव-जअनजनयम (3) में संदशितभत चननौती वरीक्षण या उव-जअनजनयम (4) में संदशितभत दसू रे वरीक्षण और नमूने की खरीद और वरीक्षण के जलए दकए जाने अनाले खचतों को दखे ने के जलए प्रवत्र 5 में अननज्ञाधारक को सूजचत करेगा।[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 5 (5) जहां, दसू रा वरीक्षण जअनफल होता है, ब् यूरो,- (क) प्रवत्र VI, में अननज्ञाधारक को सभी राज्य नामोदद्दष् ट एजेंजसयों को जनदिे दगे ा दक अननज्ञाधारक दो माह की अअनजध के अंदर, i. जडस्ट् रीब् यूिन रांसफॉमार के लेबल वर सही स्ट् टार स्ट् तर प्रदशितित करेगा अथअना वरीक्षण के दौरान त्रनठटयों और खाजमयों को दरू करेगा; ii. ब् यूरो के ददिा- जनदिे ों के अननवालन में बाजार से सभी स्ट्ट ॉक को अनावस लेगा; और iii. जअनज्ञाजवत सामग्री वर प्रदशितित जअनअनरण में वठरअनतान करेगा। (ख) उवभोक् ताओं के लाभ के जलए, दो माह के अंदर अननज्ञाधारक का नाम, ब्ाण् ड का नाम, मॉडल का नाम अथअना मॉडल संख्य ा, प्रतीक जचनन और अन्‍द य जअनजनर्ददष् टता दकसी दजै नक राष् रीय अथअना क्षेत्रीय समाचारवत्र अथअना इलेक् रॉजनक अथअना यथोजचत दकसी अन्‍द य तरीके से प्रकाजित करेगा। (ग) संबंजधत राज्य नामोदद्दष्ट एजेंसी को ईसी अजधजनयम, 2001 की धारा 27 के तहत अननज्ञाधारक और ्‍ यावारी के जखलाफ न्‍द याजयक कानूनी काराअनाई करने की सूचना द।ें (6) उव-जअनजनयम (5) में संदशितभत दो माह की अअनजध समाप्त होने के दस ददनों के अंदर,- (क) ब् यूरो को ददिा-जनदिे के अननवालन में की गई काराअनाई के संबंध में प्रवत्र VII में अननवालन ठरवोटा भेजेगा; और (ख) यदद खण् ड (क) में संदशितभत अननवालन ठरवोटा प्राप्त नहीं हुई ह ै अथअना जअनजनधााठरत अअनजध के अंदर जनदिे का वालन दकए जबना प्राप्त होती ह,ै इसे जारी जनदिे ों का गैर-अननवालन माना जाएगा और ब् यूरो द्वारा इस आिय के आदिे क् या है? दकस जअनजनयम के तहत दकया गया ह ैआदद जअनजनर्ददष् ट दकया जाना चाजहए। (7) ब् यूरो अजधजनयम की धारा 17 के तहत काराअनाई करने के प्रयोजनाथा सभी राज्य नामोदद्दष् ट एजेंजसयों को जअनजनयम-(6) के खण् ड (क) में संदशितभत अननवालन ठरवोटा और खण् ड (ख) में जारी आदिे ों की छाया प्रजत, आअनश् यक दस्ट् ताअनेजों सजहत भेजेगा और कजथत उव-जअनजनयम के खण् ड (ख) के तहत जारी आदिे ों का प्रत् याअनतान करेगा; (8) जहां अननज्ञाधारक, ब्यूरो द्वारा उव-जअनजनयम (5) के तहत जारी दकए गए ददिा-जनदिे ों का अननवालन करने में जअनफल रहता है, अनहां ब्यूरो सभी राज्य नामोदद्दष्ट एजेंजसयों को सूचना दते े हुए - (क) जअनजनयम 7 के उव-जअनजनयम (1) के तहत अननज्ञाधारक को प्रदत्त अननमजत अनावस ले लेगा; (ख) केन्‍दरीय सरकार को अननज्ञाधारक द्वारा ऊजाा खवत अजधजनयम की धारा 14 के खण्ड (क) के तहत केन्‍दरीय सरकार द्वारा अजधसूजचत ऊजाा खवत मानक और ब्यूरो द्वारा उव-जअनजनयम (6) के खण्ड (क) द्वारा संदशितभत आदिे ों का अननवालन करने में जअनफलता के समथान में जांच ठरवोटा के साथ, जअनचाराथा और केन्‍दरीय सरकार द्वारा अजधजनयम की धारा 14 के खण्ड (ग) के तहत काराअनाई करने हते न ठरवोटा भेजेगा। (ग) उवभोिाओं के लाभ के जलए, दो माह के अंदर, दकसी राष्ट्रीय या क्षेत्रीय दजै नक समाचार वत्र म ें और दकसी इलेक्रॉजनक या दकसी अन्‍दय तरीके से जैसा उजचत समझा जाए, अननज्ञाधारक का नाम, ब्ांड नाम, मॉडल का नाम या मॉडल संख्या, लोगो और अन्‍दय जअनजनदिे न प्रकाजित करेगा। (घ) संबंजधत राज्य नामोदद्दष्ट एजेंजसयों को अजधजनयम की धारा 27 के तहत अननज्ञाधारक और व्यावारी के जखलाफ आगे अजधजनणाय काराअनाई िनरू करने के जलए सूजचत करेगा। 12. अनमन जत जनरस्ट्त करना :- ब्यूरो जअनजनयम 7 के तहत प्रदत्त अननमजत को जनरस्ट् त कर सकता है, यदद अननज्ञाधारक – (क) जअनजनयम 8 के तहत जअनजनर्ददष्ट दकसी जनयम और िता का वालन नहीं करता; (ख) जअनजनयम 9 के तहत जअनजनर्ददष्ट अअनजध के अंदर लेबल िनल्क का भनगतान नहीं करता; (ग) जअनजनयम 11 के तहत जारी जनदिे ों का अननवालन नहीं करता। अभय बाकरे, महाजनदिे क [जअनज्ञावन III/4/असा./232/2022-23]6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] प्रवत्र I – (क) [जअनजनयम 6 (2) देख]ें (कंवनी के लटे र हेड म ेंडप्रट दकया जाए) ऊजा ादक्षता ब्यूरो (जडस्ट्रीब्यिू न रासं फॉमरा के लबे ल वर जअनअनरण और उनके प्रदिना की प्रजअनजध) जअनजनयम, 2022 के तहत जडस्ट्र ीब्य िू न रासं फॉमरा के वजं ीकरण हते नआअनदे न-वत्र महा जनदिे क ऊजाा दक्षता ब् यूरो (जअनद्यनत मंत्रालय, भारत सरकार) चौथा तल, सेअना भअनन, सेक् टर – 1, आर. के. वनरम, नई ददल् ली – 110 066 भारत मैं / हम ___________(व्यजि या फमा का वूरा नाम) __________ की िैली के अंतगात __________ (्‍ यावार का वूरा वता) ्‍ यावार करने के जलए जडस्ट् रीब् यूिन रांसफॉमार का/के जअनजनमााता अथअना आयातक ह ं / ह ैं जैसा ऊजाा दक्षता ब्यूरो (जडस्ट्रीब्यूिन रांसफॉमार के लेबल वर जअनअनरण और उनके प्रदिान की प्रजअनजध) जअनजनयम, 2022 में ब् यूरो द्वारा जअनजनर्ददष् ट है, जडस्ट् रीब् यूिन रांसफॉमार वर प्रदशितित करने/लगाने की अननमजत वाने हते न आअनेदन करता ह/ंकरते हैं। उवकरण, कंवनी, जअनजनमाणा सनजअनधा, और भनगतान संबंधी जअनस्ट्त ृत जअनअनरण अननल्‍न क में ददया गया है। फमा वंजीयक अथअना संस्ट् थाओं / उद्योग जनदिे क (छोटे वैमाने की इकाइयों के मामले में) द्वारा जारी जनगमन प्रमाणवत्र अथअना अन्‍द य सदिृ दस्ट् ताअनेजों की छायाप्रजत संल्‍न ह ैजो फमा का नाम और इसके जअनजनमााण वठरसरों को अननप्रमाजणत करते हैं, संल्‍न ह।ै क) आअनेदक/ अजधकृत ्‍ यजि : ______________________ (नाम और वदनाम) कंवनी/ फमा आदद की रर से यह आअनेदन करने के जलए अजधकृत ह ै और अनह इस आअनेदन के साथ मनहयै ा कराई गई सूचना की सटीकता एअनं अजधप्रमाजणकता के जलए उत्तरदायी होगा। ख) संवका ्‍ यजि : ______________________ (नाम और वदनाम) इस आअनेदन और लेबल के उवयोग के संबंध में ब् यूरो के साथ समन्‍द अनय करने के जलए अजधकृत संवका ्‍ यजि है। ग) मैं/हम उवरोक् त (क) अथअना (ख) में वठरभाजित अजधकृत ्‍ यजियों में दकसी वठरअनतान के बारे में ब् यूरो को सूजचत करने का अनचन दते ा ह/ं दते े हैं। 3. मेरी/ हमारी जानकारी और अनमन ान के अननसार, कजथत उवकरण के उत् वादन और जबरी संबंधी आंकडे और इनका मूल् य जनम् नानसन ार ह ैं: अनि ा उत्व ादन जबरी उवकरण का अजधकतम खनदरा मल्ू य (रु.) .............. से ........... तक अंजतम अनिा अनतामान अनिा.................... से ................ तक अनिा (अननमान) 4. एक लाख रुवए या वच्चीस हजार रुवए का लेबल प्रजतभूजत िनल्क, जैसा भी मामला हो, इलेक्रॉजनक मोड द्वारा भनगतान दकया गया ह ै (केअनल लेबल प्रजतभूजत िनल्क जमा करने के समय ही भरा जाना ह)ै । 5. मैं/हम ब् यूरो द्वारा यथा जअनजनर्ददष् ट लेबडलग िनल् क का भनगतान करने को सहमत ह/ंहैं। 6. मैं/हम ब् यूरो द्वारा जअनजनर्ददष् ट सभी जनयमों एअनं िततों का वालन करने और ब् यूरो द्वारा कोई वूछताछ दकए जाने की जस्ट्थजत में उस े आअनश् यक सहायता/सहयोग दने े को सहमत ह/ंहैं।[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 7 7. मैं/हम ऊजाा दक्षता ब् यूरो को सत् यावन के जलए नमूने का चयन करने और वरीक्षण को चननौती दने े के जलए अजधकृत करता ह/ंकरते ह ैं और इस संबंध में ब् यूरो के जनदिे ों का वालन करने को सहमत ह/ंहैं। 8. मैं/हम यह घोिणा करता ह/ं करते ह ैं दक इस आअनेदन वत्र में दी गई सूचना मेरी/हमारी जानकारी के अननसार सही ह ै और यदद कोई सूचना गलत वाई जाती है; आअनेदन-वत्र को तत् काल अस्ट् अनीकृत दकया जा सकता ह।ै ददनांक .......ददन .....(अनिा) हस्ट् ताक्षर नाम ................. वदनाम ................ के जलए और उनकी रर से................ (फमा का नाम) फमा की मनहर (प्रवत्र 1 – (क) का वरै ा 2 दखे )ें 1. कंवनी का जअनअनरण कंवनी का नाम वता जवन कोड राज्य फोन नं. फैक् स नं. ई-मेल अनेबसाइट वंजीकरण का समथान करने के जलए संलग्नक: (क) जनमााण या व्याअनसाजयक वठरसर के नाम और वते को प्रमाजणत करने अनाला दस्ट्ताअनेी हां / नहीं (ख) व्यावार जचनन प्रमाण वत्र (ग) लघन उद्योग प्रमाणवत्र, यदद लागू हो (घ) गनणअनत्ता प्रबंधन प्रणाली प्रमाणवत्र (ड.) अजधकृत हस्ट्ताक्षरी वत्र (च) भारतीय मानक लाइसेंस ब्यूरो, यदद लागू हो (छ) भनगतान के जलए भनगतान रसीद ऑनलाइन की जाती है 2. जअनजनमााण वठरसर का जअनअनरण (एक से अजधक जअनजनमााण सनजअनधाओं के मामले में एक अलग ताजलका प्रदान की जा सकती ह)ै8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] जअनजनमाणा सनजअनधा का नाम वता जवन कोड राज्य / दिे फोन नंबर फैक्स नंबर ईमेल अनेबसाइट कोई अन्‍दय जअनअनरण (यदद कोई हो) हस्ट् ताक्षर ................ नाम .................. वदनाम ................. के जलए और उनकी रर से......... (फमा का नाम) फमा की मनहर प्रवत्र । - (ख) [जअनजनयम 6 दखे ]ें ऊजा ादक्षता ब्यूरो (जडस्ट्रीब्यिू न रासं फॉमरा के लबे ल वर जअनअनरण और उनके प्रदिान की प्रजअनजध) जअनजनयम, 2022 के तहत जडस्ट्र ीब्य िू न रासं फॉमरा वर लेबल जचवकान ेकी अनमन जत हते नआअनदे न-वत्र महा जनदिे क ऊजाा दक्षता ब् यूरो (जअनद्यनत मंत्रालय, भारत सरकार) चौथा तल, सेअना भअनन, सेक् टर – 1, आर. के. वनरम नई ददल् ली – 110 066 भारत मैं / हम ____________________________ (व्यजि या फमा का वूरा नाम) ____________________ की िैली के अंतगात ____________________________ (्‍ यावार का वूरा वता) ्‍ यावार करने के जलए जडस्ट् रीब् यूिन रांसफॉमार का/के जअनजनमााता अथअना आयातक ह ं/ ह ैंजैसा ऊजाा दक्षता ब्यूरो (जडस्ट्रीब्यूिन रांसफॉमार के लेबल वर जअनअनरण और उनके प्रदिान की प्रजअनजध) जअनजनयम, 2022 में ब् यूरो द्वारा जअनजनर्ददष् ट दकया गया है, जडस्ट् रीब् यूिन रांसफॉमार वर प्रदशितित करने / लगाने की अननमजत वाने हते न आअनेदन करता हं / करते ह।ैं 2. जअनजनमााता सनजअनधा : उवरोक् त उवकरण ___________ (कंवनी का नाम) द्वारा जअनजनशितमत या आयाजतत ह ै और ___________ (कारखाने का नाम और वता) में जअनजनशितमत ह।ै 3. सूचना का जअनअनरण : उवकरण, कंवनी, जअनजनमाणा सनजअनधा, वरीक्षण उत् वादों के जलए प्रमाणन, लेबल और भनगतान संबंधी जअनस्ट्त ृत जअनअनरण अननबंध में ददया गया ह।ै फमा वंजीयक अथअना संस्ट् थाओं / उद्योग जनदिे क (छोटे वैमाने की इकाइयों के मामले में) द्वारा जारी जनगमन प्रमाणवत्र अथअना अन्‍द य सदिृ दस्ट् ताअनेजों की छायाप्रजत संल्‍न है जो फमा का नाम और इसके जअनजनमााण वठरसरों को अननप्रमाजणत करते हैं, संल्‍न है। क) आअनेदक/ अजधकृत ्‍ यजि : ______________________ (नाम और वदनाम) कंवनी/ फमा आदद की रर से यह आअनेदन करने के जलए अजधकृत ह ै और अनह इस आअनेदन के साथ मनहयै ा कराई गई सूचना की सटीकता एअनं अजधप्रमाजणकता के जलए उत्तरदायी होगा।[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 9 ख) संवका ्‍ यजि : ______________________ (नाम और वदनाम) इस आअनेदन और लेबल के उवयोग के संबंध में ब् यूरो के साथ समन्‍द अनय करने के जलए अजधकृत संवका ्‍ यजि है। ग) मैं/हम उवरोक् त (क) अथअना (ख) में वठरभाजित अजधकृत ्‍ यजियों में दकसी वठरअनतान के बारे में ब् यूरो को सूजचत करने का अनचन दते ा ह/ं दते े हैं। 4. मानकों का अननवालन : मैं/हम ________ (उवकरण का नाम) के जलए ________ (अजधसूचना का िीिाक) के संबंध में अजधसूचना में यथा: जअनजनर्ददष् ट आईएस/अन्‍द य (मानक का नाम और संख्य ा) ___________ के अननसार गनणअनत्ता प्रणाली / अन्‍द य मानकों के संबंध में भारतीय मानक ब् यूरो / अन्‍द य अंतरराष् रीय मानकों का वालन करते ह।ैं संगठन और / अथअना उवरोक् त उवकरण के संबंध में लाइसेंस/प्रमाणवत्र की छायाप्रजत संल्‍न है। मैंने / हमने, उवकरण की गनणअनत्ता की जनरंतरता सनजनजित करने के जलए अवनी आंतठरक प्रयोगिाला ________________ अथअना एनएबीएल द्वारा प्रत् याजयत प्रयोगिाला ________ (प्रयोगिाला का नाम और वता) में वरीक्षण हते न ्‍ यअनस्ट्थ ा कर ली ह।ै स्ट् अनतंत्र प्रयोगिाला का ब् यौरा : क) वरीक्षण जअनअनरण (वरीक्षण की प्रदरया / नाम / संख् या) ख) प्रत् यायन की जस्ट्थजत : ग) ऊजाा दक्षता ब् यूरो का अननमोदन : 5. मेरी/ हमारी जानकारी और अनमन ान के अननसार, कजथत उवकरण के उत् वादन और जबरी संबंधी आंकडे और इनका मूल् य जनम् नानसन ार ह ैं: अनि ा उत्व ादन जबरी उवकरण का अजधकतम खनदरा मल्ू य (रु.) .............. से ................ तक अंजतम अनिा अनतामान अनिा................... से ................ अनिा तक (अननमान) 6. (क) इलेक् रॉजनक जअनजध द्वारा दो हजार रुवए के आअनेदन िनल् क का भनगतान कर ददया गया ह।ै (ख) एक लाख रुवए या वच्चीस हजार रुवए के लेबल प्रजतभूजत िनल्क का भनगतान इलेक्रॉजनक जअनजध द्वारा दकया गया है। (ग) मैं/हम ब्यूरो द्वारा यथा जअनजनर्ददष्ट के लेबडलग िनल्क का भनगतान करने के जलए सहमत ह/ंहैं। 7. मैं/हम ब्यूरो द्वारा जअनजनर्ददष्ट सभी जनबंधनों एअनं िततों का वालन करने और ब्यूरो द्वारा कोई वूछताछ दकए जाने की जस्ट्थजत में उसे आअनश्यक सहायता/सहयोग दने े को सहमत ह/ंहैं। 8. मैं/हम ऊजाा दक्षता ब्यूरो को सत्यावन के जलए नमूने का चयन करने और वरीक्षण को चननौती दने े के जलए अजधकृत करता ह/ंकरते ह ैं और इस संबंध में ब्यूरो के जनदिे ों का वालन करने को सहमत ह/ंहैं। 9. मैं/हम यह घोिणा करता हं/ करते ह ैं दक इस आअनेदन वत्र में दी गई सूचना मेरी/हमारी जानकारी के अननसार सही ह ै और यदद कोई सूचना गलत वाई जाती है; आअनेदन-वत्र को तत्काल अस्ट्अनीकृत दकया जा सकता ह।ै ददनांक .................... ददन ...... (अनिा) भअनदीय हस्ट् ताक्षर ............................ नाम................................ वदनाम.............................. के जलए और उनकी रर से............. (फमा का नाम) फमा की मनहर10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] [प्रवत्र । - (ख) का वैरा 3 देख]ें सूचना का जअनअनरण 1. उत्व ाद/ उवकरण का ब्य ौरा 1.1 सामान्‍दय उवकरण प्रकार (उदाहरण के जलए, प्राकृजतक रूव से ठंडा दकया गया तेल भरा हुआ) मॉडल का नाम / संख्या जनमााता/आयातक का नाम रांसफामार क्षमता केअनीए अनोल्टेज जनमााण का महीना और अनिा 50 प्रजतित लोडडग अनॉट वर कनल हाजन 100 प्रजतित अनॉट वर कनल हाजन 1.2 तकनीकी जानकारी र. स.ं मॉडल का माव ेगए मान घोजित मल्ू य नाम/नबं र लोड की लोड की कनल हाजनयां कनल हाजनयां स्ट्टार रेटटग कोई हाजन हाजन 50 प्रजतित 100 50 प्रजतित 100 नहीं (अनॉट) (अनॉट) की लोडडग प्रजतित की की लोडडग प्रजतित की लोडडग लोडडग 2. कंवनी का ब्य ौरा कंवनी का नाम : वता जवन कोड राज्य फोन नं. फैक् स नं. ई-मेल अनेबसाइट अजधकृत प्रजतजनजध का नाम[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 11 3. जअनजनमाणा वठरसर के ब्य ौरे वता जवन कोड राज्य फोन नं. फैक् स नं. ई-मेल अनेबसाइट अन्‍द य कोई ब् यौरा अजधकृत प्रजतजनजध का नाम 4. जाचं प्रयोगिाला के ब्य ौरे जांच प्रयोगिाला का नाम प्रत्यायन जस्ट्थजत (प्रत्यायन प्रमाण वत्र की प्रजत संलग्न करें) प्रत्यायन की अनैधता (समथान दस्ट्ताअनेज संलग्न करें) प्रत्यायन का जअनस्ट्त ार वता जवन कोड राज्य फोन नं. फैक्स नं. ई-मेल अनेबसाइट 5. लेबडलग सचू ना प्रारंभ होने की जतजथ ऊजाा दक्षता ब् यूरो के जलए आअनेदन दकए गए लेबलों की संख्य ा वहले अनिा के जलए – दसू रे अनिा के जलए – तीसरे अनिा के जलए - उत् वादन श्ृंखला सं स े.......तक...................12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] 6. भनगतान का जअनअनरण कनल राजि भनगतान का ब्य ौरा (इलक्े रॉजनक भगन तान का ब्य ौरा) आअनेदन िल्न क प्रजतभजू त जमा 7. जडस्ट् रीब् यूिन रांसफामार वर जचवकाए जाने अनाले लेबल का नमूना नीचे ददखाया गया ह ै तारीख............... हस्ट्ताक्षर............................................ नाम ................................................ वदनाम ............................................. के जलए और उनकी रर से ................... (फमा का नाम) फमा की मनहर[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 13 प्रवत्र II – (क) [उव-जअनजनयम 7 (1) (क) देख]ें ऊजा ादक्षता ब्यूरो (जडस्ट्रीब्यिू न रासं फॉमरा के लबे ल वर जअनअनरण और उनके प्रदिना की प्रजअनजध) जअनजनयम, 2022 के तहत जडस्ट्र ीब्य िू न रासं फामरा के ब्ाडं के वजं ीकरण की अनमन जत नई ददल् ली, ददनांक .................. प्रजत, ...................................................... ...................................................... ...................................................... 1. ऊजाा दक्षता ब्यूरो (जडस्ट्रीब्यूिन रांसफॉमार के लेबल वर जअनअनरण और उनके प्रदिान की प्रजअनजध) जअनजनयम, 2022 के अननसरण में जअनजनयम 7 के प्राअनधानों के अननसरण में ब्यूरो एतद्वारा आवको इस वत्र के अननल्‍न क में जनधााठरत अननमोदनों के जअनअनरण के अननसार अवने ब्ांड के वंजीकरण की अननमजत दते ा ह।ै 2. यह अननमजत जनम् नजलजख त के अ्‍य धीन ह ै— (क) जडस्ट् रीब् यूिन रांसफामार के लेबल वर प्रदशितित स्ट्टार स्ट्तर अजधजनयम के धारा के 14 खंड (क) और उवरोि जनयमों में प्रदान दकए गए जनयमों और िततों के तहत अजधसूजचत जडस्ट् रीब् यूिन रांसफामार के जलए ऊजाा खवत मानकों के अननरूव होगा; (ख) जडस्ट् रीब् यूिन रांसफामार के केअनल ससे मॉडल वर लेबल की मोहर लगाना जजसके जलए अननमजत दी गई है; (ग) अननज्ञाधारक के खचा वर जडस्ट् रीब् यूिन रांसफामार वर लेबल का मनरण और जचवकाना; (घ) अननज्ञाधारक यह सनजनजित करता ह ैदक जडस्ट् रीब् यूिन रांसफामार वर प्रदशितित स्ट्टार स्ट्तर हर समय बनाए रखा जाएगा; (ड.) ब्यूरो द्वारा जनर्ददष्ट लेबल िनल्क का भनगतान करने अनाला अननज्ञाधारक; (च) अननज्ञाधारक जअनत्तीय अनिा की प्रत्येक जतमाही की समाजि के अगले माह के अंदर ब्यूरो को एक जअनअनरण प्रस्ट्तनत करेगा जजसमें लेबल दकए गए उवकरणों के उत्वादन और प्रत्येक जतमाही के जलए अशितजत लेबडलग िनल्क का जअनअनरण होगा। अनही ब्यौरे स्ट्अनचाजलत प्रणाजलयों के मा्‍यम से ब्यूरो को भी प्रस्ट्तनत दकए जाएंगे; (छ) अननज्ञाधारक जडस्ट् रीब् यूिन रांसफॉमार के ससे अन्‍दय जअनअनरण ब्यूरो द्वारा मांगे जाने वर उवलब्ध कराएगा जजसके जलए अननमजत प्रदान की गई ह।ै 3. अननज्ञाधारक, ब्यूरो के वूअनााननमोदन के जबना, अनैधता अअनजध के दौरान बाजार से वंजीकृत ब्ांड और जडस्ट् रीब् यूिन रांसफामार को अनावस नहीं लेगा। 4. ब्ांड के जलए ऊजाा दक्षता ब्यूरो द्वारा जनर्ददष्ट जअनजिष् ट लेबल श्ृंखला कोड ............ ह ै और अननमोददत जडजाइन के अननसार लेबल वर ददखाई दने ा चाजहए। 5. .................तारीख ………माह.............. अनिा को हस्ट् ताक्षठरत, मनहरबंद और ददनांदकत भअनदीय, (सजचअन) ऊजाा दक्षता ब् यूरो अनलन ्‍न क [प्रवत्र II – (क) का वैरा 1 दखे ें] अनमन ोदनों का जअनअनरण 1. कंवनी का जअनअनरण कंवनी का नाम वता जवन कोड राज्य14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] फोन नंबर फैक्स नंबर ई-मेल अनेबसाइट 2. वजं ीकृत ब्ाडं का नाम : 3. जअनजिष्ट श्खृं ला कोड : 4. अन्‍दय जअनअनरण, यदद लाग ूहो तो : जतजथ : भअनदीय, (सजचअन) ऊजाा दक्षता ब् यूरो प्रवत्र II (ख) [उव-जअनजनयम 7(1)(बी) ऊजा ादक्षता ब्यूरो (जडस्ट्रीब्यिू न रासं फॉमरा के लबे ल वर जअनअनरण और उनके प्रदिना की प्रजअनजध) जअनजनयम, 2022 के तहत जडस्ट्र ीब्य िू न रासं फामरा वर लेबल जचवकान ेके जलए अनमन जत / अनमन जत का नअनीनीकरण नई ददल् ली, ददनांक .................. प्रजत, ...................................................... ...................................................... 1. ऊजाा दक्षता ब्यूरो (जडस्ट्र ीब्य िू न रासं फामरा के लबे ल वर जअनअनरण और उनके प्रदिना की प्रजअनजध) जअनजनयम, 2022 के अननसरण में जअनजनयम 7 के प्राअनधानों के अननसरण में ब्यूरो एतद्वारा आवको इस वत्र के अननल्‍न क में जनधााठरत अननमोदनों के जअनअनरण के अननसार जचवकाने की अननमजत दी गई थी। 2. यह अननमजत जनम् नजलजख त के अ्‍य धीन ह ै— (क) जडस्ट् रीब् यूिन रांसफामार के लेबल वर प्रदशितित स्ट्टार स्ट्तर अजधजनयम की धारा के 14 खंड (क) और उवरोि जअनजनयमों म ें प्रदान दकए गए जनयमों और िततों के तहत अजधसूजचत जडस्ट् रीब् यूिन रांसफामार के जलए ऊजाा खवत मानकों के अननरूव होगा; (ख) लेबल केअनल जडस्ट् रीब् यूिन रांसफामार के ससे मॉडल वर लगाया जाएगा जजसके जलए अननमजत दी गई है; (ग) लेबल, अननज्ञाधारक के खचा वर मनदरत दकया और जडस्ट् रीब् यूिन रांसफामार वर जचवकाया जाएगा; (घ) अननज्ञाधारक यह सनजनजित करेगा दक जडस्ट् रीब् यूिन रांसफामार वर प्रदशितित स्ट्ट ार स्ट्त र हमेिा बना रहगे ा; (ड.) अननज्ञाधारक प्रजत लेबल सौ रुवए का िनल् क का भनगतान करेगा; (च) अननज्ञाधारक जअनत्तीय अनिा की प्रत्येक जतमाही की समाजि के अगले माह के अंदर ब्यूरो को एक जअनअनरण प्रस्ट्तनत करेगा जजसम ें लेबल दकए गए उवकरणों के उत्वादन और प्रत्येक जतमाही के जलए अशितजत लेबडलग िनल्क का जअनअनरण होगा। अनही ब्यौरे स्ट्अनचाजलत प्रणाजलयों के मा्‍यम से ब्यूरो को भी प्रस्ट्तनत दकए जाएंगे; (छ) अनज्ञन ाधारक जअनतरण रांसफॉमार के ससे अन्‍दय जअनअनरण ब्यूरो द्वारा मांगे जाने वर उवलब्ध कराएगा जजसके जलए अननमजत प्रदान की गई ह।ै[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 15 3. यह अननमजत ............ से ...............तक मान्‍द य होगी और जनधााठरत जअनअनरण के अननसार इसका नअनीकरण कराया जा सकता है। अननज्ञा धारक बाजार से अननमजत की अनैधता अअनजध के दौरान ब् यूरो के वूअना अननमोदन के जबना जडस्ट् रीब् यूिन रांसफामार को अनावस नहीं लेगा। 4. ऊजाा दक्षता ब् यूरो द्वारा उवकरण के जलए दी गई जअनिेि लेबल श्ृंखला ............. ह ै और अननमोददत जडजाइन के अननसार यह लेबल वर स्ट् वष् ट रूव से ददखाई दने ी चाजहए। 5. जहां केन्‍द रीय सरकार द्वारा समीक्षाधीन स्ट्टार स्ट्तर योजना में आिोधन दकया गया है, जडस्ट् रीब् यूिन रांसफामार का स्ट्टार स्ट्तर जनम्नाननसार आिोजधत होगा : - (क) यदद संिोजधत स्ट् टार स्ट् तर के तनल् यकाजलक रूव में नया मॉडल िनरू दकया जाता ह ै तो इसकी अनमन जत हते न ब् यूरो के वास उस तारीख से 6 माह अजग्रम में आअनेदन दकया जाए जजस तारीख से नए स्ट् टार स्ट्त र लागू होंगे; (ख) जहां वठरअनशिततत स्ट्टार स्ट्तर लागू करने के जलए मौजूदा मॉडल को जारी रखा जाता है, ब्यूरो के वास घोिणा केअनल प्रवत्र IV में प्रस्ट्तन त की जाएगी। 6. .................तारीख ………माह.............. अनिा को हस्ट् ताक्षठरत, मनहरबंद और ददनांदकत (सजचअन) ऊजाा दक्षता ब् यूरो अनलन ्‍न क (प्रवत्र 2 का वरै ा 1 दखे )ें अननमोदन का ब् यौरा 1. उवकरण का ब्य ौरा उवकरण प्रकार (उदाहरण के जलए, तेल भरे हुए, प्राकृजतक रूव से ठंडा दकए गए) मॉडल का नाम / संख्या जनमााता/आयातक का नाम रांसफामार क्षमता केअनीए अनोल्टेज जनमााण का महीना और अनिा 50 प्रजतित लोडडग अनॉट वर कनल हाजनयां 100 प्रजतित अनॉट वर कनल हाजनयां र. स.ं मॉडल का माव ेगए मान घोजित मल्ू य नाम/नबं र लोड की भार की कनल हाजनयां कनल हाजनयां स्ट्टार रेटटग कोई हाजन 50 100 50 100 हाजन (अनॉट) प्रजतित प्रजतित प्रजतित प्रजतित नहीं की की लोडडग की लोडडग की (अनॉट) लोडडग लोडडग16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] 2. लेबल का ब्य ौरा उवकरण प्रकार जनमााता / आयातक / ब्ांड का नाम मॉडल का नाम / संख्या जअनजनमाणा का अनिा रांसफामार क्षमता केअनीए अनोल्टेज स्ट्टार लेअनल लेबल की अअनजध 50 प्रजतित लोडडग अनॉट वर कनल हाजन 100 प्रजतित अनॉट वर कनल हाजन जअनजिष् ट श्ृंखला कोड 3. जडस्ट् रीब् यूिन रांसफॉमार वर लगाया जाने अनाला ब्यूरो द्वारा जअनजधअनत अननमोददत लेबल का नमूना, जो नीचे दिााया गया ह ै: वत्र में दी गई जअनजिष् ट लेबल श्ृंखला कोड का उल् लेख जडस्ट् रीब् यूिन रांसफॉमार वर लगाए गए लेबल में दकया जाता ह।ै 4. लेबल के जलए इस्ट्तेमाल की जाने अनाली जडजाइन, आकार, रंग योजना, सामग्री और अननसूची म ें यथाजअनजनर्ददष् ट ब्यूरो के लोगो में लेबल और रंग योजना का उल्लेख दकया जाएगा। जतजथ ........................ हस्ट् ताक्षर .................................. . नाम .......................................... वदनाम ...................................... के जलए और उनकी रर से ........... (फमा का नाम) फमा की मनहर[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 17 प्रवत्र III [जअनजनयम 7 के उव-जअनजनयम (2) दखे ें] ऊजा ादक्षता ब्य ूरो द्वारा अनरन जक्षत दकए जान ेअनाल ेअनज्ञन ाधारकों के रजजस्ट्टर (टेम्प् लटे ) र. सं. आअनेदन सं. और अननज्ञाधारकों उवकरण के घोजि त स्ट्ट ार ऊजाा दक्षता ब्यूरो अअनजध जजसमें अननमजत की जतजथ का नाम और जअनअनरण स्ट् तर या दक्षता अननमजत संख्या अननमजत प्रदान की जअनअनरण (संवका जजनकी स्ट् तर की और जअनजिष् ट गई है ्‍ यजि, वता, अननमजत प्रदान लेबल श्ृंखला जवन कोड, की गई ह ै राज्य, फोन सं., फैक्स नं., ई- मेल, अनेबसाइट) (1) (2) (3) (4) (5) (6) (7) लेबल प्रजत भूजत िनल् क इलेक्रॉजनक लेन-दने (जअनअनरण) प्राप्त आअनेदन िनल् क का मूल् य इलेक्रॉजनक लेन-दने (जअनअनरण) : की राजि : (जतजथ:) से प्राि लेबल (जतजथ:) से प्राि आअनेदन िनल्क की प्रजत भूजत िनल् क राजि के जअनअनरण (8) (9) (10) (11) प्रत् येक जअनत्तीय अनिा के दौरान प्रत् येक जअनत्तीय अनिा के जलए प्रत्येक जअनत्तीय अनिा (इलेक्रॉजनक लेन-दने ठटप्व जणयां लगाए गए लेबलों की कनल ऊजाा दक्षता ब् यूरो के जलए दये (जअनअनरण) : जतजथ:) के जलए प्राि जअनअनरण संख्य ा िनल् क के लेबडलग की राजि के लेबडलग िनल्क (12) (13) (14) (15) IV [ 7 उ - (7) ] (प्रत्यके जभन्न मॉडल के जलए, संबजंधत अनबन ंध सजहत एक वथृ क वत्र प्रस्ट्ततन दकया जाएगा) (जनगजमत जनकाय / अनज्ञन ाधारक के लटे र हडै वर) ददनाकं :18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] सेअना में, महाजनदिे क ऊजाा दक्षता ब्यूरो (जअनद्यनत मंत्रालय, भारत सरकार) चौथा तल, सेअना भअनन, सेक्टर – 1, आर. के. वनरम, नई ददल्ली – 110 066 भारत जअनिय : …………… से प्रभाअनी स्ट्ट ार स्ट्त र में वठरअनतना के सबं धं म ें ऊजा ा दक्षता ब्यूरो (जडस्ट्र ीब्य िू न रासं फामरा के लेबल वर उनके प्रदिना का जअनअनरण और प्रजअनजध) के जठरए लबे ल लगान ेकी अनमन जत हते नआअनेदन वत्र 1. मैं/हम [व्यजि या फमा का वूरा नाम] की िैली में [कंवनी का नाम, वूरे वते सजहत] में व्यावार करने अनाला/अनाले जडस्ट् रीब्यूिन रांसफामार का/के जअनजनमााता/ आयातक ह/ं ह ैंऔर एतदद्वारा ऊजाा दक्षता ब्यूरो (जडस्ट्रीब्यूिन रांसफॉमार के लेबल वर जअनअनरण और उनके प्रदिान की प्रजअनजध) जअनजनयम, 2022 में ब्यूरो द्वारा यथा जअनजनर्ददष्ट जडस्ट् रीब्यूिन रांसफामार वर लेबल जचवकाने की अननज्ञा के जलए आअनेदन करता ह/ंकरते हैं, जजसमें............. से स्ट्टार स्ट्तर में संिोधन होगा। 2. उवरोि उवकरण [व्यजि या फमा का वूरा नाम] द्वारा जअनजनशितमत ह ैऔर इसका (कारखाने का नाम और वता) में जअनजनमााण दकया गया ह ैअथअना (आयातक का नाम और वता) से आयात दकया गया ह।ै 3. नए स्ट्टार लेअनल के जलए अननरूवता : मैं/हम जडस्ट् रीब्यूिन रांसफामार के जलए अजधसूचना का. आ. सं. .... ददनांक . . . . . . . . . को स्ट्अनीकार करते ह।ैं उवरोि उवकरण के संबंध में ऊजाा दक्षता ब्यूरो के अननमोदन की प्रजत (जजसे वूअना में अननमोददत दकया गया था) संलग्न ह।ै 4. जडस्ट् रीब्यूिन रांसफामार के संबंध में ऊजाा दक्षता ब् यूरो लेबल (स्ट्टार स्ट्तर वठरअनतान के वठरिोधन के अननसार) की प्रजत संलग्न है। 5. स्ट्टार स्ट्तर के संिोधन के अननसार उवकरण/मॉडल का ब् यौरा मॉडल का नाम – .......................................... जअनअनरण घोजित मान रांसफामार क्षमता केअनीए अनोल्टेज 50 प्रजतित लोडडग अनॉट वर कनल हाजन -- 100 प्रजतित अनॉट वर कनल हाजन -- (मौजूदा स्ट्टार लेअनल के (संिोजधत स्ट्टार लेअनल के स्ट् टार रेटटग अननसार) अननसार) 6. मैं/हम, स्ट् टार स्ट् तर को (मौजूदा स्ट् टार लेबल स्ट् तर) को (संिोजधत स्ट् टार लेबल स्ट् तर) में मैननअल आअनेदन तथा ऑनलाइन अनेब वोटाल में बदलने के जलए सहमत हैं। 7. मैंने जडस्ट् रीब्यूिन रांसफामार मॉडल के जलए अभी तक जतमा ही उत् वादन आंकडे और लेबडलग िनल् क जमा करा ददया है। 8. मैं/हम, ब्यूरो द्वारा जअनजनर्ददष्ट सभी जनबंधनों और िततों का वालन करने और यदद ब्यूरो द्वारा कोई वूछताछ की जाती है, उसे आअनश्यक सहायता/ सहयोग दने े को सहमत ह/ंहैं। 9. मैं/हम, ऊजाा दक्षता ब्यूरो को सत्यावन और जांच को चननौती दने े के जलए नमूने का चयन करने का अजधकार प्रदान करते ह ैंऔर इस संबंध में ब्यूरो के ददिा-जनदिे ों का वालन करने को सहमत हैं। 10. मैं/हम यह अनचन दते ा ह/ं दते े ह ैंदक इस आअनेदन – वत्र में दी गई सूचना मेरी/हमारी जानकारी के अननसार सही ह ैऔर यदद इसमें दी गई कोई सूचना गलत वाई जाती ह,ै आअनेदन को तत्काल अस्ट्अनीकृत दकया जा सकता है।[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 19 ददनांक : ददन ........................... (अनिा) हस्ट् ताक्षर ............................ नाम ................................. वदनाम .............................. के जलए और उनकी रर से ..................... (फमा का नाम) फमा की मनहर V ( 11(3) ) / नई ददल्ली , जतजथ ................. सेअना में, ........................ ........................ ........................ ऊजाा दक्षता ब्यूरो (जडस्ट् रीब् यूिन रांसफामार के लेबल वर उनके प्रदिान का जअनअनरण और प्रजअनजध) जअनजनयम, 2022 के अननसरण में जअनजनयम 7 के प्राअनधानों के अननसरण में आवको इसमें जअनजनर्ददष्ट जनबंधनों एअनं िततों का अननवालन करने की िता वर ऊजाा दक्षता ब्यूरो के ददनांक ..............के वत्रांक.............. के जठरए जडस्ट् रीब् यूिन रांसफामार वर लेबल जचवकाने की अननमजत दी गई थी। 2. ब्यूरो द्वारा ऊजाा दक्षता ब्यूरो (जडस्ट् रीब् यूिन रांसफामार के लेबल वर उनके प्रदिान का जअनअनरण और प्रजअनजध) जअनजनयम, 2022 के जअनजनयम 11 के तहत ददनांक...................... को ......................रुवए की कीमत वर ददनांक ...................... की इनअनॉयस संख्या ...................... स्ट् अनत: संज्ञान से वरीक्षण या चननौती वरीक्षण के उद्देश्य से ___ द्वारा आवके अजधकृत जअनतरक/डीलर/खनदरा व्यावारी स े बीईई स्ट्टार के लेबल अनाला जडस्ट् रीब् यूिन रांसफामार को खरीदा गया था। उवरोि जअनजनयमों के जअनजनयम 3 के तहत लेबल वर प्रदशितित जअनअनरणों के सत्यावन के जलए ब्यूरो द्वारा जनयनि एक एजेंसी मेससा द्वारा नमूने खरीदे गए थे, जो आवके द्वारा उवरोि खरीदे गए जडस्ट् रीब् यूिन रांसफामार वर जचवकाए गए थे। नमूना मैससा ......... द्वारा रम सं. ..................सजहत मैससा (जअनतरक, डीलर, खनदरा व्यावारी का नाम) ........ ........ से जअनजधअनत सत्यावन एजेंसी के अजधकृत प्रजतजनजध के हस्ट्ताक्षर के साथ जअनजधअनत मनहरबंद दकया गया था। 3. ब्यूरो ने अवनी उजल्लजखत सत्यावन एजेंसी के मा्‍यम से वैरा 2 में संदशितभत नमूना मैससा.........., राष् रीय प्रत् यायन वरीक्षण और अंिांकन बोडा (एनएबीएल) प्रत्याजयत प्रयोगिाला को अजधसूचना संख्य ा का. आ. सं........... ददनांक .......... के वैराग्राफ 3, 4 और 5 में दी गई जांच प्रदरया के अननसार, अजधसूचना संख्य ा का. आ. सं........... के अननलग्नक में ददए गए प्रवत्र.......... के अननसार जांच ठरवोटा दने े के जलए जांच करने के जलए भेजा था। 4. उत्वाद का जअनअनरण और स्ट्अनत: संज्ञान वरीक्षण के वठरणाम (यदद लागू हो) इस वत्र के साथ संलग्न ह।ैं अब, ऊजाा दक्षता ब्यूरो (जडस्ट् रीब् यूिन रांसफामार के लेबल वर उनके प्रदिान का जअनअनरण और तरीका) जअनजनयम 2022 के जअनजनयम 11 के उव-जअनजनयम (1) के प्राअनधानों के अननसरण म,ें ब्यूरो वरीक्षण और अंििोधन प्रयोगिालाओं के जलए राष्ट्रीय प्रत्यायन बोडा द्वारा मान्‍दयता प्राि …………..(तारीख) को ………….(प्रयोगिाला का नाम) वर स्ट्अनत: संज्ञान वरीक्षण/चननौती वरीक्षण (जैसा लागू हो) आयोजजत कर रहा है। 5. ऊजाा दक्षता ब्यूरो (जडस्ट् रीब् यूिन रांसफामार के लेबल वर उनके प्रदिान का जअनअनरण और प्रजअनजध) जअनजनयम, 2022 के जअनजनयम 11 के उव-जअनजनयम (4) के प्राअनधानों के अननसार, ब्यूरो एतदद्वारा सूजचत करता ह ै– (i) नाजमत अजधकारी के नाम, वदनाम और हस्ट्ताक्षर का संकेत (मूल रूव में) एक प्राजधकरण वत्र के साथ जनर्ददष्ट उवरोि जतजथ वर चननौती वरीक्षण / दसू रे वरीक्षण को दखे ने के जलए एक अजधकारी को नाजमत करें (वत्र वर जअनजधअनत हस्ट्ताक्षर और कंवनी के अजधकृत हस्ट्ताक्षरकताा द्वारा मनहर लगाई जाएगी)। (ii) इस वत्र के जारी होने की जत जथ से वन्‍दरह ददनों के अंदर खरीद, वठरअनहन, वरीक्षण और अन्‍दय आकजस्ट्मक ्‍ ययों के जलए उक् त लागत20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] जमा करें, जैसा दक अननल्‍न क में उल्लेख दकया गया ह ै(खचा इलेक्रॉजनक जअनजध के मा्‍यम से जमा दकया जाएगा)। 6. आव ्‍यान द ेंदक ब्यूरो चननौती वरीक्षण या दसू रे वरीक्षण द्वारा सत्यावन जारी रखेगा, भले ही उवयनाि खचा समय वर नहीं दकए गए हों या अजधकाठरयों को जनर्ददष्ट के रूव में नाजमत नहीं दकया गया ह ै और ऊजाा दक्षता ब्यूरो (जडस्ट् रीब् यूिन रांसफामार के लेबल वर उनके प्रदिान का जअनअनरण और प्रजअनजध) जअनजनयम, 2022 के जअनजनयम 11 के उव-जअनजनयम (5) के अनसन ार मामले में आगे की काराअनाई करेंगे। 7. .................तारीख ………माह.............. अनिा को हस्ट् ताक्षठरत, मनहरबंद और ददनांदकत (सजचअन) ऊजाा दक्षता ब् यूरो संल्‍न क : 1. उत्वाद का जअनअनरण / स्ट् अनत: संज्ञान वरीक्षण के वठरणाम 2. अननलग्नक V (क) 3. ्‍ यय से संबंजधत चालान अननलग्नक [फॉमा V का वैरा 5 दखे ें] सूचना का जअनअनरण 1. चननौती वरीक्षण / दसू रे वरीक्षण के जलए उठाए गए उत्वाद या उवकरण जअनअनरण ब्ांड का नाम : जअनजिष् ट लेबल श्ृंखला कोड : मॉडल का नाम/मॉडल नंबर : कक्ष जडस्ट् रीब् यूिन रांसफामार का प्रकार : रांसफामार क्षमता केअनीए : अनोल्टेज : जनमााण का अनिा : 50% लोडडग अनॉट वर कनल हाजन : 100% अनॉट वर कनल हाजन : स्ट्टार रेटटग या स्ट्टार स्ट्तर : 2. ब्यूरो के वास जमा की जाने अनाली राजि : जअनअनरण संख्या/व्यय (भारतीय रुवए में) नमूनों की संख्या प्रजत नमूना लागत कनल रय लागत कनल वरीक्षण िनल्क यातायात भनगतान (यदद लागू हो)[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 21 अन्‍दय (यदद लागू हो) अननज्ञाधारक द्वारा भनगतान की जाने अनाली कनल राजि 3. स्ट् अनत: संज्ञान वरीक्षण के वठरणाम (यदद लागू हो) : ब्ांड मॉडल 50 प्रजतित 100 प्रजतित रांसफामार स्ट्टार रेटटग स्ट्टार रेटटग ठटप्वजणया ं लोडडग वर लोडडग वर क्षमता केअनीए (घोजित) (वरीक्षण की रेठटड कनल रेठटड कनल जांच) हाजन हाजन तारीख ……… (सजचअन) ऊजाा दक्षता ब्यूरो प्रवत्र V (जअनजनयम 11 के उव-जअनजनयम (5) दखे ें) दसू रे जाचं वरीक्षण की जअनफलता वर अनमन जत के जलए ददिा-जनदिे नई ददल्ली , तारीख सेअना में, ........................ ........................ ........................ ऊजाा दक्षता ब्यूरो (जडस्ट्र ीब्य िू न रासं फामरा के लबे ल वर उनके प्रदिना का जअनअनरण और प्रजअनजध) जअनजनयम, 2022 के अननसरण में जअनजनयम 7 के प्राअनधानों के अननसरण में आवको इसमें जअनजनर्ददष्ट जनबंधनों एअनं िततों का अननवालन करने की िता वर ऊजाा दक्षता ब्यूरो के ददनांक ..............के वत्रांक.............. के जठरए जडस्ट् रीब् यूिन रांसफामार वर लेबल जचवकाने की अननमजत दी गई थी। 2. ब्यूरो द्वारा ऊजाा दक्षता ब्यूरो (जडस्ट् रीब् यूिन रांसफामार के लेबल वर उनके प्रदिान का जअनअनरण और प्रजअनजध) जअनजनयम, 2022 के जअनजनयम . . . . . . . . . . के तहत ददनांक...................... को ......................रुवए की कीमत वर ददनांक ...................... की इनअनॉयस संख्या ...................... के जठरए आवके अजधकृत जअनतरक, डीलर, खनदरा व्यावारी से बीईई स्ट्टार के लेबल अनाला जडस्ट् रीब् यूिन रांसफॉमार को खरीदा गया था और इसको जअनजनयम 3 के तहत आवके द्वारा खरीद े गए उवरोक् त कजथत जडस्ट् रीब् यूिन रांसफामार के लेबल वर प्रदशितित जअनअनरणों के सत्यावन के जलए ब् यूरो द्वारा जनयनक्त एक एजेंसी, मैससा .......... द्वारा एक नमूने के तौर वर उठाया गया था। नमूना मैससा ......... द्वारा रम सं. ..................सजहत मैससा (जअनतरक, डीलर, खनदरा व्यावारी का नाम) ........ ........ स ेजअनजधअनत सत्यावन एजसें ी के अजधकृत प्रजतजनजध के हस्ट्ताक्षर के साथ जअनजधअनत महन रबंद दकया गया था। 3. ब्यूरो ने अवनी उजल्लजखत सत्यावन एजेंसी के मा्‍यम से वैरा 2 में संदशितभत नमूना मैससा.........., राष् रीय प्रत् यायन वरीक्षण और अंिांकन बोडा द्वारा प्रत्याजयत प्रयोगिाला को का. आ. सं........... ददनांक .......... के वैराग्राफ 4 और 5 में दी गई जांच प्रदरया के अननसार, का. आ. सं........... ददनांक .......... के अननलग्नक में ददए गए प्रवत्र.......... के अननसार जांच ठरवोटा दने े के जलए जांच करने के जलए भेजा था। 4. जअनिेि वहचान श्ृंखला संख्या अनाले नमूने की जांच ठरवोटा के वठरणाम संलग्न ह।ैं जांच ठरवोटा के वठरणाम दिाात े ह ैं दक नमूने अनाल े जडस्ट् रीब् यूिन रांसफॉमार 50% लोडडग वर कनल हाजनयों वर प्रकार वरीक्षण और 100% वर कनल हाजन आदद को वूरा करने में जअनफल रह े और यह आवके द्वारा जअनजनशितमत / आयाजतत जडस्ट् रीब् यूिन रांसफॉमार के संबंध में लेबल जचवकाने के जलए मांगी गई अननमजत के जलए आवके द्वारा प्रस्ट्तनत दकए गए आअनेदन वत्र के साथ संलग्न प्रवत्र 1 में आवके द्वारा मनहयै ा कराए गए जांच के ब्यौरे की वनजष्ट नहीं करते। बीईई के ददनांक ........ के वत्रांक ........ के जठरए जांच के वठरणाम आवके अजधकृत संवका ्‍ यजि के नाम म ें आवको भेज ददए गए थे। आवसे अननरोध दकया जाता था दक राष् रीय प्रत् यायन वरीक्षण और अंिांकन बोडा (एनएबीएल) प्रत्याजयत प्रयोगिाला मैसस ा .................................................... म ेंनमनू ों के दसू रे जाचं सत्यावन वरीक्षण म ेंजहस्ट्सा ल।ें 5. हमारी अजधकृत एजेंसी मैससा .................................................... के जठरए ददनांक ............ दसू रे जांच सत्यावन वरीक्षण के जलए नमूने उठाकर हमारी अजधकृत एजेंसी मैससा..................... द्वारा जअनजधअनत मनहरबंद कर राष् रीय प्रत् यायन वरीक्षण और अंिांकन बोडा द्वारा प्रत्याजयत प्रयोगिाला में भेजे गए थे और सत्यावन एजेंसी के जअनजधअनत अजधकृत प्रजतजनजध के साथ-साथ आवके प्रजतजनजधयों के हस्ट्ताक्षराधीन .................................................... से प्राि कजथत नमूनों वर उत्कीणा जअनिेि वहचान श्ृंखला संख्या दी गई थी।22 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] 6. दसू रे जांच सत्यावन वरीक्षण के वठरणाम संलग्न ह ैं जजनकी राष्ट्रीय वरीक्षण और अंिांकन प्रयोगिाला बोडा द्वारा प्रत्याजयत प्रयोगिाला के सक्षम अजधकृत काशितमक द्वारा जांच की गई ह ैऔर जजनके संबंध में प्रजतहस्ट्ताक्षर दकए गए ह।ै जांच ठरवोटा वर दसू रे जांच वरीक्षण के साक्ष्य के तौर वर आवके हस्ट्ताहक्षरकताा द्वारा भी जअनजधअनत हस्ट्ताक्षर दकए गए ह।ैं जांच वठरणामों से वनजष्ट होती ह ै दक ये का. आ. संख्यांक ....... ददनांक ............ में ददए गए अवेजक्षत मानदण्डों और मानकों और आवको बाजार में जअनजनशितमत / आयाजतत एअनं जबरी दकए गए जडस्ट् रीब् यूिन रांसफामार वर लगे लेबल वर ददए गए जअनअनरण को दिााने के जलए आवको दी गई अननमजत के जनबंधनों और िततों को वूरा नहीं करते। 7. अब, इसजलए ऊजाा दक्षता ब्यूरो (जडस्ट् रीब् यूिन रांसफामार के लेबल वर उनके प्रदिान का जअनअनरण और प्रजअनजध) जअनजनयम, 2022 के जअनजनयम 11 के उव-जअनजनयम (5) के खंड (क) द्वारा प्रदत्त िजि का प्रयोग करते हुए, ब्यूरो एतद्वारा जनदिे दते ा ह ै:- (i) जडस्ट् रीब् यूिन रांसफामार के लेबल वर प्रदशितित स्ट्टार स्ट्तर को ठीक करना या वरीक्षण के दौरान वाए गए दोिों और कजमयों को दरू करना; (ii) ब्यूरो के जनदिे ों का वालन करने के जलए बाजार से सभी स्ट्टॉक अनावस ले लें; तथा (iii) जअनज्ञावन सामग्री वर प्रदशितित जअनअनरणों को बदलना। 8. आवको एतदद्वारा जनदिे ददया जाता है दक इस वत्र के जारी दकए जाने की तारीख से दो माह के भीतर उजल्लजखत सनधारात्मक काराअनाई वूरी करें और दो माह की समाजि के बाद 10 ददन के अंदर अथाात .............. तक प्रवत्र VI में अननवालन ठरवोटा भेजें। यदद उि जतजथ तक कोई अननवालन ठरवोटा प्राि नहीं होती ह ै तो ब्यूरो द्वारा ऊजाा दक्षता ब्यूरो (जडस्ट् रीब् यूिन रांसफामार के लेबल वर उनके प्रदिान के जअनअनरण और प्रजअनजध) के जअनजनयम 11 के उव-जअनजनयम (6) के खंड (ख) के अननसार आगे काराअनाई की जाएगी। 9. ब्यूरो द्वारा ऊजाा दक्षता ब्यूरो (जडस्ट् रीब् यूिन रांसफामार के लेबल वर उनके प्रदिान का जअनअनरण और प्रजअनजध) जअनजनयम, 2022 के जअनजनयम 11 के जअनजनयम (5) (6) (7) और (8) के अननसार मामले में आगे की काराअनाई की जाएगी। सजचअन, ऊजाा दक्षता ब् यूरो संल्‍न क : 1. जअनफल मॉडल की वरीक्षण ठरवोटा 2. जअनजनमाता ा के साथ वत्राचार प्रवत्र VI (जअनजनयम 11 का उव जअनजनयमन (6) दखे )ें की गई काराअनाई वर ठरवोटा (संगठन के लैटर हडै वर प्रस्ट्तनत दकया जाए) सेअना में, तारीख ............. सजचअन, ऊजाा दक्षता ब्यूरो, (जअनद्यनत मंत्रालय, भारत सरकार) चौथा तल, सेअना भअनन, सेक्टर – 1, आर. के. वनरम नई ददल्ली – 110 066, भारत ऊजाा दक्षता ब्यूरो (जडस्ट् रीब् यूिन रांसफामार के लेबल वर उनके प्रदिान का जअनअनरण और प्रजअनजध) जअनजनयम, 2022 के जअनजनयम 7 के प्राअनधानों के अननसार, हमें मे. .............. ............................................. जडस्ट् रीब् यूिन रांसफामार के जअनजनमााता को ऊजाा की खवत मानक के अननरूव वत्र सं............... ददनांक ....................... के जलए मॉडल संख्या ................... द्वारा ......... स्ट्टार लेअनल के जडस्ट् रीब् यूिन रांसफामार वर लेबल लगाने की अननमजत दी गई थी। ऊजाा दक्षता ब्यूरो (जडस्ट् रीब् यूिन रांसफामार के लेबल वर उनके प्रदिान का जअनअनरण और प्रजअनजध) जअनजनयम, 2022 के जअनजनयमन 11 के उव-जअनजनयम (5) के प्राअनधानों के अननसार, हम आअनश्यक सनधारात्मक काराअनाई करने के जलए वत्र संख्या .................... ददनांक........... द्वारा जनदिे ददया गया। जनदिे के आलोक में, हम इसके द्वारा घोजित करते ह ैंदक हमारी रर से जनम्न गजतजअनजधयों को दकया गया ह।ै काराअनाई का जनदिे जस्ट्थजत की गई काराअनाई[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 23 (i) ब्यूरो के जनदिे ों का वालन करने के साथ हां/नहीं/लागू नहीं स्ट्टार स्ट्तर (जतजथ) .................से प्रभाअनी जडस्ट् रीब् यूिन रांसफामार के स्ट्तर वर प्रदशितित स्ट्टार स्ट्टार............. से ............. स्ट्टार तक सही दकया स्ट्तर सनधारें गया ह।ै (ii) ब्यूरो के जनदिे ों का वालन करने के साथ बाजार हां/नहीं/लागू नहीं ब्यूरो के जनदिे ों का वालन करने के साथ बाजार से स ेसभी स्ट्ट ॉक अनावस ले लें। और सभी स्ट्ट ॉक को अनावस ले जलया गया ह।ै (iii) जअनज्ञावन सामग्री वर प्रदशितित ब्यौरे बदलें। हां/नहीं/लागू नहीं हां/नहीं/लागू नहीं उवरोक् त दी गई घोिणा हमारे ज्ञान और जअनश्वास के अननसार सही है। हस्ट्ताक्ष.......................................... नाम ............................................ वदनाम ........................................ के जलए और उनकी रर से .... फमा/कंवनी का नाम फमा/कंवनी की मनहर अनसन चू ी (जअनजनयम 3 का उव-जअनजनयम (2) दखे ें) जडस्ट् रीब् यूिन रांसफामार के लेबलों वर प्रदशितित दकए गए जअनअनरण (क) लेबल जडजाइन, साइज, रंग की योजना और लेबल की सामग्री में ये िाजमल होंगे – (i) लेबल के जनम् नजलजखत आयाम की जडजाइन, अथाात : - (ii) ब् यूरो के लोगो के जलए जनम् नजलजखत रंग योजना, अथाात् : -24 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] नीला - नयू (H)-239o सेचनरेिन (S) : 64% ब्ाइटनेस (B):59% ल् यूजमनेंस या लाइटनेस (L) : 28, रोमेठटक वनजें -a:24 b:54 लाल (R) : 54 हरा (G) : 55 नीला (B):151 जसयान (C):97% मैजेंटा (M):95% वीला (Y):6% काला (K):1% अनेब कलर कोड - #363797 हरा - नयू (H)-150o सेचनरेिन (S):10% ब्ाइटनेस (B):67% ल् यूजमनेंस या लाइटनेस (L): 61, रोमेठटक वनजें -a:-53 b:32 लाल (R):0 हरा (G):170 नीला (B):87 जसयान (C):81% मैजेंटा (M):10% वीला (Y):90% काला (K):1% अनेब कलर कोड - #00AA56; (iii) जअनतरण रांसफॉमार वर जनम्नजलजखत लेबल लगाना होगा : (2) लेबल की सामग्री यदद लेबल डस्ट्अनग टैग के रूव में जोडा जाना ह ैतो इसे ठटकाऊ काडाबोडा का होना चाजहए या स्ट्अनयं जचवकने अनाला होना चाजहए और लेबल की जडजाइन और आयाम इन जअनजनयमों में बताए गए नमूना लेबल में से एक प्रकार के हो सकते हैं। अभय बाकरे, महाजनदिे क[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 25 THE BUREAU OF ENERGY EFFICIENCY NOTIFICATION New Delhi, the 25th August, 2022 No. BEE/S&L/DT/01/22-23.- In exercise of the powers conferred by clause (i) of sub-section (2) of section 58 read with clause (n) of sub-section (2) of section 13 of the Energy Conservation Act, 2001 (52 of 2001), the Bureau of Energy Efficiency (the Bureau) with the previous approval of the Central Government , proposes to amend the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Distribution Transformer) Regulation 2009, the proposed draft amendments are hereby published in the Gazette of India, Extraordinary, as required by sub-section (1) of section 58 of the said Act, for the information of all the persons likely to be affected thereby and inviting their suggestions and objections (if any); and the notice is hereby given that the said draft regulations shall be taken into consideration on or after the expiry of a period of thirty days from the date of their publication in the Gazette of India, Extraordinary; Objections or suggestions, if any, may be addressed to the Director-General, Bureau of Energy Efficiency, Ministry of Power, 4th Floor, Sewa Bhawan, North Wing, Sector-1, R.K.Puram, New Delhi-110066 and may also be sent at the e-mail of the Bureau at dg-bee@nic.in; Objections or suggestions which may be received from the persons with respect to the said draft regulations before the expiry of the period of thirty days specified in para 1 above, shall be taken into consideration by the Bureau of Energy Efficiency. 1. Short title and commencement.- (1) These regulations may be called the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Distribution Transformer), Amendment Regulations, 2022. (2) They shall come into force on the date of their publication in the Official Gazette. 2. Definition: - (1) In these regulations, unless the context otherwise requires,- (a) “Act‖ means the Energy Conservation Act, 2001(52 of 2001); (b) ―Distribution Transformer‖ means an appliance as specified in the notification under clause (b) of section 14 of the Act; (c) ―Form‖ means a form appended to these regulations; (d) ―label‖ means any written, printed, marked, stamped or graphic matter affixed to, or appearing upon, distribution transformer; (e) ―label period‖ means the validity period of the relative energy efficiencies or loss standards which is the total losses at 50% and 100% loading of the distribution transformer notified by the Central Government under clause (a) of section 14 and in case the end period of the validity period of the relative energy efficiencies or loss standards is not notified, it shall be deemed to be valid until new values for the same are notified by the Central Government; (f) ―permitee‖ means a person or agency to whom permission has been granted to affix label under regulation 7; (g) ―star rating or star level‖ means the grade of energy efficiency displayed on the label of the Distribution Transformer based on the total losses at 50% and 100% loading of Distribution Transformer notified by the Central Government under clause (a) of section 14 of the Act to denote the relative energy efficiencies or loss standards which is the total losses at 50% and 100% loading of the distribution transformer; (h) ―trader or seller‖ in relation to any labelled Distribution Transformer means a person who sells or distributes any such Distribution Transformer and includes the shopkeeper, trader, manufacturer and permittee who has been given permission to affix label on such Distribution Transformer. (i) ―Schedule‖ means the Schedule annexed to these regulations; (2) Words and expressions used herein and not defined, but defined in the Act, shall have meanings respectively assigned to them in the Act. 3. Particulars to be displayed on label. - (1) On every Distribution Transformer, the following particulars shall be displayed on its label, namely:- (a) the logo of the Bureau of Energy Efficiency; (b) Equipment; (c) Type; (d) Make/ Manufacturer/Importer;26 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] (e) Model/ Manufacturing Year; (f) Transformer Capacity in kVA; (g) Voltage in kV; (h) Total losses at 50% loading in watts; (i) Total losses at 100% loading in watts; (j) Unique label series code; (k) star level; and (l) label period. (2) The design, colour, size and content of label shall be as specified in the Schedule annexed to these regulations. 4. Time limit for display of labels: - (1) A label containing all the particulars specified in regulation 3 shall be displayed on every Distribution Transformer within a period of six months from the date of coming into force of these regulations. (2) On and from commencement of revised energy consumption standards notified by the Central Government under clause (a) of section 14 of the Act, every permittee or trader or seller- (a) shall not produce the Distribution Transformer with the previous energy consumption standards; (b) the Distribution Transformer shall display revised star level and label period with the revised energy consumption standard and the manufacturing year of the Distribution Transformer in synchronization with revised energy consumption standards; (c) All preparatory steps including awareness of the dealers, retailers, requisite publicity for their education as well as for the education of the consumers are well planned and action taken in advance. 5. Manner of display of label.- (1) On every Distribution Transformer, the label shall be stamped as follows, namely:— (i) The label shall be affixed at the front display of the unit and should be easily visible as referred in sub-regulation (2) of regulation 3 and the permittee shall ensure that the label appears on every registered unit or model on display for identification purpose, at point of sale or hire and the label shall also be printed or pasted to the exterior to the casing containing the unit or model. (ii) For units not on display, the label may be printed or pasted to the exterior to the casing and this label may be attached to the unit or model when the unit or model is removed from its packaging or the label may be included as a part of the documentation given to the customer or user. 6. Permission for display of label. - (1) No star label shall be affixed on a Distribution Transformer without obtaining the prior permission of the Bureau. (2) Company registration.- For the purposes of obtaining permission of the Bureau, every brand shall be registered separately as specified in Form I – (A), accompanied by a label security fee of one lakh rupees, payable by electronic mode of payment: Provided that in case of small scale industry, the label security fee shall be twenty five thousand rupees only. (3) Model registration.- Every application of the permittee under sub-regulation (2) shall be accompanied by— (a) an application fee of two thousand rupees per model, payable by electronic mode of payment; and (b) documents specified in Form I – (B). 7. Grant of permission.- (1) On receipt of an application under regulation 6 and after being satisfied that all requirements therein are complied with, the Bureau may, within a period as specified in its Manual on standards and labelling, subject to such terms and conditions as specified in regulation 8, – (a) register the brand in Form II-(A) in electronic form; and (b) grant permission for affixing label on Distribution Transformer in Form II-(B) in electronic form. (2) The Bureau shall maintain a register in Form III and enter the name of the permittee therein.[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 27 (3) The permission so granted under sub-regulation (1) shall be valid for such period till which the star level specified by the energy consumption standard as notified by the Central Government under clause (a) of section 14 is in force. (4) In case of revision of star rating plan, an application for renewal of permission shall be made by the permittee not later than one month before its expiry and shall be accompanied by a fee of rupees one thousand payable in electronic mode in favour of the Bureau of Energy Efficiency, New Delhi. In case of extension of star rating plan, the said renewal fee of rupees one thousand shall be exempted. (5) No application shall be renewed after expiry of validity period, in which case the permittee shall make a fresh application. (6) On receipt of application for renewal under sub-regulation (4) and after being satisfied that all requirements are complied with, the Bureau may, within a period of one month from the date of such receipt, renew permission in Form II. (7) The permittee who seeks permission for continuance to affix label on the existing model of the Distribution Transformer from the date from which the revised star level comes into force shall submit only a declaration in Form IV. (8) The permittee shall seek permission to affix label afresh, if new model of the Distribution Transformer is planned to be launched to synchronise with the revised star level and application for such permission may be made six months in advance of coming into force of the revised star level. 8. Terms and conditions for display of particulars on label.- Every permittee, trader and seller shall comply with the following terms and conditions in displaying the particulars on label, namely:- (a) the star level displayed on the label of Distribution Transformer shall conform to energy consumption standards for Distribution Transformer notified by the Central Government under clause (a) of section 14 of the Act; (b) the label shall be affixed only on such model of Distribution Transformer for which permission has been granted; (c) the label shall be printed and affixed on the Distribution Transformer at the cost of permittee; (d) the permittee, trader and seller shall ensure that the star level displayed on the label of Distribution Transformer shall be maintained at all time; (e) the permittee shall pay the label fee as specified in regulation 9; (f) the permittee shall furnish to the Bureau a statement containing details of production of labelled equipment and the accrued labeling fee due for each quarter within the following month of the close of each quarter of the financial year; (g) the permittee shall furnish to the Bureau an updated list of authorised distributors, dealers, retailers, sellers appointed to sell their labelled products by 30th day of April of each year; (h) the permittee, trader and seller shall comply with such other terms and conditions which the Bureau may specify including those contained in the Bureau’s Manual on Standard and Labelling. 9. Label fee.- (1) Every permittee shall pay to the Bureau a label fee of hundred rupees for each label affixed on the distribution transformer. (2) The label fee specified under sub-regulation (1) shall be paid annually within one month from the date of closure of each financial year: Provided that on failure to pay the label fee within the period so specified, the Bureau may recover the amount due with interest thereon at ten percent per annum from the label security fee made under clause (b) of sub-regulation (3) of regulation 6, and if complete labeling fees are not recovered within one year of the last date of submission, the Bureau may cancel all labels granted to the permittee and publish the name of the permittee in the newspapers as a defaulter. 10. Refund of label security fee.- Subject to the provisions of sub-regulation (2) of regulation 9, a permittee shall be entitled to a refund of the label security fee, on ceasing to manufacture distribution transformer. 11. Verification by Bureau.- (1) The Bureau or its designated agency may, either suo motu, or on a complaint received by it, carry out verification to ensure that the Distribution Transformer conforms to the star level and other particulars displayed on its label and that it complies with the other terms and conditions of permission.28 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] (2) For the purpose of verification, samples shall be picked up at random by Bureau or its designated agency from the manufacturing facility, warehouse or the retail outlet as it deems fit and shall be subjected to (a) Measurement of winding resistance test (b) Measurement of Impedance voltage or short circuit impedance and load loss (c) Measurement of No-load loss and current test (d) temperature rise test and (e) short circuit test. (3) Where, upon a complaint received under sub-regulation (1), the Bureau is required to carry out verification by challenge testing the Distribution Transformer in an independent laboratory duly accredited by National Accreditation Board for Testing and Calibration Laboratories, a notice shall be issued to the permittee in form V for carrying out such testing and the complainant shall be called upon to deposit, such expenses relating to sample cost, testing, transportation and other incidental expenses with the Bureau, within such time, as may be determined by Bureau, and if the sample drawn under challenge testing fails, all expenses towards the cost of sample, transportation of sample and the testing charges, shall be reimbursed by the permittee to the Bureau and the Bureau shall refund the aforesaid expenses to the complainant; and where the equipment passes the challenge test, then, the expenses deposited by the complainant shall stand forfeited. (4) Where samples of Distribution Transformer used for testing fails the test during suo motu testing or challenge testing, the permittee shall be offer another opportunity and the Bureau shall conduct second test with twice the quantity of Distribution Transformer used in the first test in an independent test laboratory which is different from the lab where the first check testing was conducted and shall be duly accredited by National Accreditation Board for Testing and Calibration Laboratories at the cost of the permittee. The Bureau shall intimate the permittee in Form V to witness the challenge testing referred to in sub-regulation (3) or the second test referred to in sub- regulation (4) and the expenses to be made towards the procurement and testing of sample. (5) Where the second test fails, the Bureau shall,- (a) direct the permittee in Form VI, under intimation to all the State Designated Agencies, that the permittee shall, within a period of two months,- (i) correct the star level displayed on the label of the Distribution Transformer or remove the defects and deficiencies found during testing; (ii) withdraw all the stocks from the market to comply with the directions of the Bureau; and (iii) change the particulars displayed on advertising material; (b) publish for the benefit of the consumers, the name of any permittee, brand name, model name or model number, logo and other specifications in any national or regional daily newspaper and in any electronic means or in any other manner as it deems fit, within two months; (c) Intimate to the concerned State Designated Agency to initiate adjudication proceedings against the permittee and the trader under section 27 of the Act. (6) The permittee shall within ten days of the conclusion of the period of two months referred to in sub-regulation (5),- (a) send the compliance report in Form VII to Bureau with respect to action taken in compliance with the direction; and (b) in case the compliance report referred to in clause (a) is not received or received without complying to any of the direction within the specified period, it shall be deemed as non- compliance of the direction issued and orders to that effect shall be passed by the Bureau. (7) The Bureau shall send a copy of the compliance report referred to in clause (a) and orders passed in clause (b) of sub-regulation (6) along with necessary documents to all the State Designated Agencies for the purpose of taking action under section 17 of the Act and enforcement of the orders passed under clause (b) of the said sub-regulation. (8) Where the permittee fails to comply with the directions issued by the Bureau under sub-regulation (5), the Bureau under intimation to all State Designated Agencies, shall,- (a) withdraw the permission granted to the permittee under sub-regulation (1) of regulation 7; (b) send report to the Central Government accompanied by the test report in support of the failure by the permittee to conform to the energy consumption standards notified by the Central Government under clause (a) of section 14 of the Act, the directions of the Bureau referred to in clause (a) of sub-regulation (6) for consideration and taking action under clause (c) of section 14 of the Act by the Central Government;[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 29 (c) publish for the benefit of the consumers, the name of any permittee, brand name, model name or model number, logo and other specification in any national or regional daily newspaper and in any electronic or in any other manner as it deems fit within two months; (d) intimate to the concerned State Designated Agencies to initiate further adjudication proceedings against the permittee and the trader under section 27 of the Act. 12. Cancellation of permission.- The Bureau may cancel the permission granted under regulation 7, if the permittee – (a) fails to comply with any of the terms and conditions specified under regulation 8; (b) fails to pay label fee within the period specified under regulation 9; (c) does not comply with the direction issued under regulation 11. ABHAY BAKRE, Director General [ADVT.-III/4/Exty./232/2022-23] FORM I – (A) [See regulation 6 (2)] (To be printed in Company letter head) Application for registration of brand of distribution transformer under the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations, 2022 The Director General Bureau of Energy Efficiency, (Ministry of Power, Government of India) 4th Floor, Sewa Bhawan, Sector-I, R.K. Puram, New Delhi – 110 066, India. I/We am/are the manufacturer/manufacturers of distribution transformer carrying out business at........................................... (full business address) under the style of (full name of individual or firm) hereby apply for permission to affix label on distribution transformer as specified by the Bureau in the Bureau of Energy Efficiency (Particulars and Manner of their Display of the Label on Distribution Transformer) Regulations, 2022. The details of the information in respect of the equipment, company, manufacturing facility and payment is given in Annexure. A photocopy of the certificate of incorporation issued by the Registrar of Firms or Societies or Director of Industries (in case of Small Scale Units) or similar other documents authenticating the name of the firm and its manufacturing premises is enclosed. (a) Applicant/Authorised person: ............ (Name and Designation) is authorised to make this application on behalf of the company/firm or other authorities. and will be responsible for accuracy of the information supplied with this application. (b) Contact person (Name and designation) is authorised to be the contact person for coordination with the Bureau in respect of this application and use of the label. (c) I/We undertake to intimate to the Bureau of any change in the authorized persons defined in (a) or (b) above 3. Production and sale figures of the said equipment and the value thereof to the best of my/our knowledge and estimates are as follows: Year Production Sales Maximum retail price of the equipment (Rs.) Last year from.................to................... Current year from........to (estimate) 4. A label security fee of one lakh rupees or twenty-five thousand rupees as the case may be has been paid by electronic mode (To be filled only at the time of submission of label security fee). 5. I/We agree to pay the labelling fee as specified by the Bureau.30 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] 6. I/We agree to abide by all the terms and conditions specified by the Bureau and extend necessary assistance/co- operation to the Bureau in case of any enquiry to be made by it. 7. I/We authorise the Bureau of Energy Efficiency for selection of sample for verification and challenge testing and agree to abide by the directions of the Bureau in this regard. 8. I/We undertake that the information supplied in this application is accurate to the best of my knowledge, and if any of the information supplied is found to be incorrect; the application may be rejected forthwith. Dated this ............Day of ………(Year) Signature ............................................. Name ................................................... Designation ......................................... For and on behalf of........................... Name of the firm) / SEAL OF FIRM Annexure [See para 2 of Form I – (A)] 1. Details of the Company Name of the company Address Pin code State Phone number Fax number E-mail Website Enclosures to support registration: (a) Document authenticating the name and address of the manufacturing or business premises Yes/No (b) Trade mark certificate (c) Small scale industries Certificate, if applicable (d) Quality Management System Certificate (e) Authorised signatory letter (f) Bureau of Indian standards license, if applicable (g) payment receipt for payment is made online 2. Details of the manufacturing premise (a separate table may be provided in case of more than one manufacturing facility) Name of the manufacturing facility Address Pin code State / Country Phone number Fax number[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 31 E-mail Website Any other details (if any) Signature ............................................. Name ................................................... Designation ......................................... For and on behalf of........................... Name of the firm) / SEAL OF FIRM FORM I- (B) [See regulation 6] Application for permission to affix label on Distribution Transformer under the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations, 2022 The Director General Bureau of Energy Efficiency (Ministry of Power, Government of India) 4th Floor, Sewa Bhawan, Sector – 1, R.K.Puram New Delhi-110 066 India. I/ We are the manufacturers or importers of Distribution Transformer carrying out business at ___________________(full business address) under the style of _________________ (full name of individual or firm) hereby apply for permission to affix label on Distribution Transformer as specified by the Bureau in the Bureau of Energy Efficiency (Particulars and Manner of their Display of Label on Distribution Transformer) Regulations, 2022. 2. Manufacturing Facility: The above equipment is manufactured or imported by ___________ (Name of the company) and is manufactured at ____________ (Name and address of the factory) 3. Details of information: The details of the information in respect of the equipment, company, manufacturing facility, certification for the test products, labels and payment is given in Annexure. A photocopy of the certificate of incorporation issued by the Registrar of Firms or Societies/Director of Industries (in case of Small Scale Units) or similar other documents authenticating the name of the firm and its manufacturing premises is enclosed. (a) Applicant/authorized person: ______________________ (Name and Designation) is authorised to make this application on behalf of the company/firm/etc., and will be responsible for accuracy and authenticity of the information supplied with this application. (b) Contact Person: ______________________ (Name and Designation) is the authorized contact person for coordination with the Bureau in respect of this application and the use of the Label. (c) I/We undertake to intimate to the Bureau of any change in the authorised persons defined in (a) or (b) above 4. Conformance to Standards: I/We conform to the Bureau of Indian Standard/other international standards in respect of Quality System/Other standards in accordance with IS/Others (name and number of the standard) ___________ as specified in the notification on ___________________(title of the notification) for the ________ (name of the equipment). A copy of the License / certificate in respect of the above equipment is enclosed. I/We have made arrangement for testing at our in-house laboratory ________________ or at NABL accredited laboratory ________ (Name and address of the laboratory) for ensuring consistency in quality of the equipment. Independent Laboratory details: a) Test details (test procedure/ name/number) b) Accreditation status:32 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] c) Bureau of Energy Efficiency approval: 5. Production and sales figures of the said equipment and the value thereof to the best of my/our knowledge and estimates are as follows: Year Production Sales MRP of the equipment (Rs.) Last year from ______ to ________ Current year from ___ to___(estimate) 6. (a) An application fee of two thousand rupees paid by electronic mode. (b) A Label security fee of one lakh rupees or twenty five thousand rupees ________________ has been paid by electronic mode. (c) I/We agree to pay the labeling fee as specified by the Bureau. 7. I/We agree to abide by all the terms and conditions specified by the Bureau and extend necessary assistance/ co-operation to the bureau in case of any enquiry to be made by it. 8. I/We authorise the Bureau of Energy Efficiency for selection of sample for verification and challenge testing and agree to abide by the directions of the Bureau in this regard. 9. I/We undertake that the information provided in this application is accurate to the best of my knowledge, and if any of the information supplied is found to be incorrect; the application may be rejected forthwith Dated this …………day of ……. (Year) Yours Faithfully, Signature …..……………………… Name ……………………………… Designation ……………………….. For and on behalf of….…………… (Name of the firm) SEAL OF FIRM Annexure [See para 3 of Form 1(B)] Details of Information 1. Product/Equipment Detail 1.1 General Equipment Type (for example, oil filled naturally cooled, ) Model Name / Number Name of the manufacturer/Importer Transformer Capacity kVA Voltage Month and Year of manufacturing Total losses at 50% loading watts Total losses at 100% watts[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 33 1.2 Technical details SL. No. Model Measured values Rated values Name/ No. No Load Total Losses Total Losses Star Load Loss Rating 50% 100% 50% 100% Loss (watt) loading loading loading loading (watts) 2. Details of the company Name of the company: Address Pin Code State Phone No. Fax No. E-Mail Web site Name of the Authorized representative 3. Details of the manufacturing premise Address Pin Code State Phone No. Fax No. E-Mail Web site Any other details Name of the Authorized representative 4. Details of test laboratory Name of the test Laboratory Accreditation status (Attach copy of the accreditation certificate) Validity of the accreditation (Attach supporting document) Scope of Accreditation Address Pin Code State Phone No.34 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] Fax No. E-Mail Web site 5. Labeling information Date of commencement Number of labels applied for Bureau of Energy Efficiency for the first year - for the second year - for the third year - Product Serial No. From ____________ To ______ 6. Payment details Total Amount Details of Payment (electronic payment details) Application Fee Security Deposit 7. Specimen of the label to be affixed on the distribution transformer is shown below:[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 35 Date Signature …………………………… Name ……………………………….. Designation …………………………. For and on behalf of………………… ………………………………………. (Name of the firm) / SEAL OF FIRM FORM II – (A) [See regulation 7 (1) (a)] Permission for registration of brand of distribution transformer under the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations, 2022 New Delhi, dated.................. To ...................................................... ...................................................... ...................................................... 1. Pursuant to the provisions of regulation 7 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Distribution Transformer) Regulations, 2022, the Bureau hereby permits you to register your brand as per details of approvals set out in Annexure to this letter. 2. This permission is subject to— (a) the star level displayed on the label of the distribution transformer shall conform to energy consumption standards for distribution transformer notified under clause (a) of section 14 of the Act and terms and conditions provided in the aforesaid regulations; (b) the stamping of the label only on such model of distribution transformer for which permission has been granted; (c) the printing and affixture of the label on the distribution transformer at the cost of the permittee; (d) the permittee ensuring that the star level displayed on the distribution transformer shall be maintained at all time; (e) the permittee paying the label fee as specified by the Bureau; (f) the permittee furnishing to the Bureau a statement containing details of the production of the labelled equipment and the accrued labelling fee due for each quarter within the following month of the close of each quarter of the financial year. The same details shall be furnished to the Bureau also through an automated system; (g) the permittee making available such other details of distribution transformer as and when sought by the Bureau of which the permission has been granted. 3. The permittee shall not withdraw the registered brand and the distribution transformer from the market during the validity period except with the prior approval of the Bureau. 4. The unique label series code assigned by the Bureau of Energy Efficiency for the brand is............. and should appear on the label as per the approved design. 5. Signed, sealed and dated this................. day of .............month ............... year. Yours faithfully (Secretary) Bureau of Energy Efficiency36 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] Annexure [See para 1 of Form II-(A)] Details of Approvals 1. Details of the company Name of the company Address Pin code State Phone number Fax number E-mail Website 2. Name of the brand registered: 3. Unique series code: 4. Other details if applicable: Date: Yours faithfully, (Secretary) Bureau of Energy Efficiency FORM II (B) [Sub-regulation 7(1)(b)] Permission / Renewal of Permission to affix label on Distribution Transformer under the Bureau of Energy Efficiency (Particulars and Manner of their display on Label of Distribution Transformer) Regulations, 2022 New Delhi, dated the......... To ...................................................... ....................................................... 1. Pursuant to the provisions of regulation 7 of the Bureau of Energy Efficiency (Particulars and Manner of their display on Label of Distribution Transformer) Regulations, 2022, the Bureau hereby permits you to affix label as per details of approvals set out in the Annexure to this letter. 2. This permission is subject to— (a) the star level displayed on the label of the Distribution Transformer shall conform to energy consumption standards for Distribution Transformer notified under clause (a) section 14 of the Act and terms and conditions provided in the aforesaid regulations; (b) the label shall be affixed only on such model of Distribution Transformer for which permission has been granted; (c) the label shall be printed and affixed on the Distribution Transformer at the cost of the permittee; (d) the permittee shall ensure that the star level displayed on the Distribution Transformer shall be maintained at all time;[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 37 (e) the permittee shall pay the label fee of hundred rupees per label; (f) the permittee shall furnish to the Bureau a statement containing details of production of labelled equipment and the accrued labeling fee due for each quarter within the following month of the close of each quarter of the financial year. The same details shall be furnished to the Bureau also through automated systems; (g) the permittee shall make available such other details of Distribution Transformer as and when sought by the Bureau for which the permission has been granted. 3. This permission shall be valid for from ............................... to .............................and may be renewed as prescribed. The permittee shall not withdraw the Distribution Transformer from the market during the validity period of permission except with the prior approval of the Bureau. 4. The unique label series code assigned by Bureau of Energy Efficiency for the equipment is.............and should appear on the label as per the approved design. 5. Where the star level plans on review is modified by the Central Government, the star level of the Distribution Transformer shall stand modified as follows:- (a) if new model is launched synchronizing with the revised star level, an application for such permission shall be made to Bureau six months in advance of the date from which new star level comes in to force; (b) where the existing model is continued to give effect to the modified star level, only a declaration in Form IV shall be submitted to the Bureau. 6. Signed, sealed and dated this................. day of ……….month.............. year. (Secretary) Bureau of Energy Efficiency Annexure [See para 1 of Form II] Details of Approvals 1. Details of the Equipment Equipment Type (for example, oil filled naturally cooled, ) Model Name / Number Name of the manufacturer/Importer Transformer Capacity kVA Voltage Month and Year of manufacturing Total losses at 50% loading watts Total losses at 100% watts SL. Model Measured values Rated values No. Name/ No. No Load Total Losses Total Losses Star Rating Load Loss 50% 100% 50% 100% Loss (watt) loading loading loading loading (watts)38 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] 2. Label Details Equipment Type Name of the make/manufacturer/importer Model Name/Number Year of manufacturing Transformer Capacity kVA Volatge Star level Label period Total losses at 50% loading watts Total losses at 100% watts Unique Series Code 3. Specimen of the label duly approved by Bureau to be affixed on the distribution transformer is shown below. The unique label series code provided in the letter has to be mentioned in the label affixed on the Distribution Transformer. 4. The label design, size, colour scheme, material to be used for the label and the content of the label and colour scheme of the Bureau's logo shall be as specified in the Schedule. Date ..................... Signature ............................................. Name .................................................... Designation ......................................... For and on behalf of............................ (Name of the firm) SEAL OF FIRM[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 39 FORM III [See sub-regulation (2) of regulation 7] Register of Permittees to be maintained by Bureau of Energy Efficiency (template) Sl. Application Name and details of Details of Star level or Bureau of Period for No. No. and Date the permittee equipment for Efficiency Energy which the of (Contact Person, which the level Efficiency permission Permission Address, Pin Code, permission has declared permission has been State, Phone No., been granted number and granted Fax No., E-mail, unique label Website) series (1) (2) (3) (4) (5) (6) (7) Amount of Label Label Security Fee Amount of Application Fees Details of Application Fee Security Fee received by (Electronic received Amount received (Electronic transaction (Details): transaction (Details) : (Date:) (Date:) (8) (9) (10) (11) Total number of Amount of labeling Labeling fee details received for each Remarks labels affixed fee payable to financial year (Electronic transaction during each Bureau of Energy Details): Date:) financial year Efficiency for each financial year (12) (13) (14) (15) Form IV [See sub-regulation (7) of regulation 7] Declaration by Permittee seeking continuation of the permission to affix label on the existing model (For each different model, a separate letter shall be submitted along with respective Annexure) (On the letter head of Corporate body/Permittee) Date: To THE DIRECTOR GENERAL BUREAU OF ENERGY EFFICIENCY (MINISTRY OF POWER, GOVERNMENT OF INDIA) 4TH FLOOR, SEWA BHAWAN, SECTOR 1, R.K.PURAM, NEW DELHI-110 066 INDIA. Sub: Application for permission to affix label vide Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations, 2022 on revision of star level effective from 1. I/ We are the manufacturers / importers of Distribution Transformer carrying on business at [COMPANY NAME WITH FULL ADDRESS] under the style of [FULL NAME OF INDIVIDUAL OR FIRM] hereby apply for permission to affix label on Distribution Transformer as specified by the Bureau in the Bureau of Energy Efficiency40 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations, 2022 which would go for revision of star level with effect from ............. 2. The above equipment is manufactured or imported by [FULL NAME OF INDIVIDUAL OR FIRM] and is manufactured at (NAME AND ADDRESS OF FACTORY) or imported from (NAME AND ADDRESS OF IMPORTER) 3. Conformance to New Star level: I/We conform to the table change as per Table … as specified in the notification number S.O. number. ..……….dated...... for Distribution Transformer. A copy of the Bureau’s approval in respect of the above equipment (which was earlier approved) is enclosed. 4. A copy of the Bureau of Energy Efficiency Label (as per revision of star level change) in respect of the Distribution Transformer is enclosed. 5. Details of the Equipment / Model as per revision of star level Model Name - ____________________________ Particulars Declared Values Transformer Capacity kVA Voltage Total losses at 50% loading watts -- Total losses at 100% watts -- Star Rating (As per existing star level) (As per the revised star level) 6. I/We agree to change the star level from [EXISTING STAR LABEL LEVEL] to [REVISED STAR LABEL LEVEL] in manual application as well as in the online web portal. 7. I have submitted my quarterly production data and labelling fee till date for the said Distribution Transformer model. 8. I/We agree to abide by all the terms and conditions specified by the Bureau and extend necessary assistance/cooperation to the Bureau in case of any enquiry to be made by it. 9. I/we authorise the Bureau of Energy Efficiency for selection of sample for verification and challenge testing and agree to abide by the directions of the Bureau in this regard. 10. I/We undertake that the information supplied in this application is accurate to the best of my/our knowledge, and should any of the information supplied is found to be incorrect, the application may be rejected forthwith. Date: ___________ Day of ……………………….. (Year) Signature …………………………… Name ……………………………….. Designation …………………………. For and on behalf of………………… (Name of the firm) SEAL OF FIRM FORM V [See regulation 11 (3)][भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 41 Intimation to permittee to witness Challenge test/Second test To New Delhi, dated the….. ………………….. …………………. Pursuant to the provisions of regulation 7 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations, 2022 you were permitted to affix label on the Distribution Transformer vide Bureau of Energy Efficiency letter No. ..............dated subject to the compliance of the terms and conditions specified therein. 2. The Bureau, under regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations 2022, had purchased a Bureau of Energy Efficiency star labelled Distribution Transformer from your authorized distributor/dealer/retailer vide Invoice number .......dated…….. for a price of Rs................ and lifted as a sample dated by ___ for the purpose of suo motu testing or challenge testing. The samples were purchased by M/s , an agency appointed by the Bureau for verification of the particulars displayed on the label under regulation 3 of the aforesaid regulations, affixed by you on the aforesaid purchased distribution transformer. The sample duly sealed by M/s............... bearing serial number-------- was obtained from M/s..........(Name of the Distributor, dealer, retailer) under signatures of the duly authorized representative of the verification agency. 3. The Bureau through its aforesaid verification agency had transported the sample referred to in para 2 to M/s.----- a National Accreditation Board for Testing and Calibration Laboratories accredited laboratory for conducting tests in accordance with the test procedure indicated in paragraphs 3, 4 and 5 of the notification number S.O....dated...... for giving test report in accordance with the Form given in Annexure to the notification number S.O. ....... 4. The details of the product and the suo motu test results (if applicable) is enclosed with this letter. Now, therefore in pursuance of the provisions of sub-regulation (1) of regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations 2022, the Bureau is conducting suo motu test/challenge test (as applicable) on ……..(date) at …………(Name of laboratory), accredited by National Accreditation Board for Testing and Calibration Laboratories. 5. Pursuant to the provisions of sub-regulation (4) of regulation 11of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer Regulations 2022, the Bureau hereby intimates to - (i) nominate an official to witness challenge test/second test on the above date specified along with an authorization letter indicating (in original) the name, designation and signature of the nominated official (the letter shall be duly signed and stamped by authorized signatory of the company). (ii) deposit such cost towards procurement, transportation, testing and other incidental expenses as mentioned in Annexure, within fifteen days from the date of issuance of this letter (the expenses shall be deposited through electronic mode). 6. You may note that the Bureau shall continue the verification by challenge test or second test, even if the aforementioned expenses are not made in time or the officials are not nominated as specified and shall take further follow up action in the matter in terms of sub-regulation (5) of regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations 2022. 7. Signed, sealed and dated this................. day of ……….month ................ year. (Secretary) Bureau of Energy Efficiency Enclosures: 1. Details of product/ suo motu test results 2. Annexure V(a) Invoice related to the expenses42 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] Annexure [See para 5 of Form V] Details of Information 1. Product or equipment details picked up for challenge test/second test Brand name: Unique label series code: Model name/Model number: Type of room Distribution Transformer: Transformer Capacity kVA: Voltage : Year of manufacturing: Total losses at 50% loading watts: Total losses at 100% watts: Star rating or star level: 2. Amount to be deposited to the Bureau: Details Numbers/ expenses (in Indian Rupee) Number of samples Cost per sample Total purchasing cost Total testing charges Transportation charges (if applicable) Others (if applicable) Total amount to be paid by the permittee 3. Results of suo moto test (if applicable): Brand Model Rated total Rated Transformer Star rating Star Remarks losses at 50% total capacity (Declared) rating loading losses at KVA (Check 100 % tested) loading Date:….. (Secretary) Bureau of Energy Efficiency[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 43 FORM V [See sub-regulation (5) of regulation 11] Direction to Permittee on failure of second check testing To New Delhi, dated the….. ......................... ......................... ......................... Pursuant to the provisions of regulation 7 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations, 2022, you were permitted to affix label on the Distribution Transformer vide Bureau of Energy Efficiency letter No. ..............dated....... subject to the compliance of the terms and conditions specified therein. 2. The Bureau, under Regulation … of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations, 2022, had purchased a Bureau of Energy Efficiency star labelled Distribution Transformer from your authorised Distributor, dealer, retailer vide Invoice number .......dated for a price of Rs................ and lifted as a sample dated ……by M/s......................, an agency appointed by the Bureau for verification of the particulars displayed on the label under regulation 3 of the aforesaid regulations, affixed by you on the aforesaid purchased Distribution Transformer. The sample duly sealed by M/s............... bearing serial number……..was obtained from M/s..........(Name of the Distributor, dealer, retailer) under signatures of the duly authorised representative of the verification Agency. 3. The Bureau through its aforesaid Verification Agency had transported the sample referred to in para 2 to M/s. ..................., a National Accreditation Board for Testing and Calibration Laboratories accredited laboratory for conducting tests in accordance with the test procedure indicated in paragraphs 4 and 5 of S.O.number ……dated the …. for giving Test Report in accordance with the Form ….given in Annexure to S.O.. number…….. dated the …….. 4. The results of the Test Report on the sample bearing Unique Identification serial number is enclosed. The results of the Test Report indicated that the sampled Distribution Transformer failed to meet the type test at total losses at 50% loading and total loss at 100% etc. and did not conform to the Test details furnished by you in Form 1 annexed to the Application submitted by you for seeking permission to affix label on the Distribution Transformer manufactured/imported by you. The Test Results were sent to you vide Bureau of Energy Efficiency letter No... ..... dated........in the name of your authorised Contact person. You were also requested to attend and witness the Second Check Verification Test of the samples at the National Accreditation Board for Testing and Calibration Laboratories Accredited Laboratory M/s.................................................... 5.The Sample for second check verification Test were picked up …. dated the …. through our authorised Agency M/s. ............and transported to the National Accreditation Board for Testing and Calibration Laboratories accredited Laboratory transported by our authorised Agency, duly sealed by M/s............... and was given Unique Identification serial number embossed on the said sample obtained from ............... ..........under signatures of the duly authorised representative of the verification Agency as well as your representatives. 6. The Test results of second check testing are enclosed which are dully checked and counter signed by the competent authorised personnel of the National Accreditation Board for Testing and Calibration Laboratories Accredited Laboratory. The test report is also duly signed by your authorised signatory as witness of 2nd check testing. The Test Results confirm that they failed to meet the requisite parameters and standards given in S.O.number …. dated, …. and the terms and conditions of the permission given to you for display of particulars on label affixed to the Distribution Transformer manufactured/imported and sold in the market . 7. Now, therefore in exercise of the power conferred clause (a) of sub-regulation (5) of regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Distribution Transformer) Regulations, 2022, the Bureau hereby directs to :- (i) correct the star level displayed on the label of the Distribution Transformer or remove the defects and deficiencies found during testing; (ii) withdraw all the stocks from the market to comply with the directions of the Bureau; and (iii) change the particulars displayed on advertising material. 8. You are hereby directed to complete the aforesaid corrective action within two months from the date of issue of this letter and send the compliance report in Form VI within 10 days after the expiry of two months i.e. by .In case no compliance report is received by the said date the Bureau shall proceed to take action in terms of clause (b) of44 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] sub-regulation (6) of regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Distribution Transformer) Regulations, 2022. 9. The Bureau shall take further follow up action in the matter in terms of regulations (5) (6)(7) and (8) of regulation 11 of the Bureau of Energy Efficiency( Particulars and Manner of their Display on Labels of Distribution Transformer) Regulations, 2022. Secretary, Bureau of Energy Efficiency Enclosures: 1. Test reports of the failed model 2. Correspondence with the manufacturer Form VI [See sub-regulation (6) of regulation 11] Action Taken Report (To be furnished on the letter head of the organisation) To Dated….. THE SECRETARY, BUREAU OF ENERGY EFFICIENCY (MINISTRY OF POWER, GOVERNMENT OF INDIA) 4TH FLOOR, SEWA BHAWAN, SECTOR 1, R.K.PURAM, NEW DELHI-110 066 INDIA. Pursuant to the provisions of regulation 7 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations, 2022, we M/s....................................................................................the manufacturer of Distribution Transformer were permitted to affix label on the Distribution Transformer conforming to the energy consumption standard of ................star level vide Bureau of Energy Efficiency letter No.................dated...............for the model number.......................................... Pursuant to the provisions of sub-regulation (5) of regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Distribution Transformer) Regulations, 2022, we were given directions vide Bureau of Energy Efficiency letter number....................dated........... to take necessary corrective action. In the light of directive issued by Bureau of Energy Efficiency, we hereby declare that the following actions have been taken at our end. Action Directed Status Action Taken (i) Correct the star level displayed on the Yes/No/NA The star level has been corrected label of the Distribution Transformer from..............star to.......................star to comply with the directions of the with effect from (Date) Bureau (ii) Withdraw all the stocks from the Yes/No/NA All the stocks from the market have market to comply with the directions been withdrawn to comply with the of the Bureau. and directions of the Bureau. (iii) Change the particulars displayed on Yes/No/NA Yes/No/NA advertising material. The above declaration is true to the best of our knowledge and belief. Signature………………….. Name……………………… Designation……………….. For and on behalf of............. Name of the Company/Firm etc Seal of the Firm/Company‖[भाग III—खण् ड 4] भारत का राजवत्र : असाधारण 45 SCHEDULE [See sub-regulation (2) of regulation 3] Particulars to be displayed on labels of Distribution Transformer. (a) Label design, size, colour scheme and content of the label shall include:- (i) the following dimensional design of label, namely:— (ii) the following colour scheme for the label, namely:— BLUE – Hue(H)-239o Saturation(S):64% Brightness(B):59% Luminance or lightness(L) :28, chromatic components -a:24 b:54 Red(R):54 Green(G):55 Blue(B):151 Cyan(C):97% Magenta(M):95% Yellow(Y):6% Black(K):1% Web colour code - #36379746 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] GREEN – Hue(H)-150o Saturation(S):10% Brightness(B):67%, Luminance or lightness(L) :61, chromatic components - a:-53 b:32, Red(R):0 Green(G):170 Blue(B):87 Cyan(C):81% Magenta(M):10% Yellow(Y):90% Black(K):1%, Web colour code - #00AA56; (iii) following label to be affixed on distribution transformer:- (2) Label Material The label shall be of durable cardboard, if it is to be attached as a swing tag, or be self-adhesive and shall be cut to one of the outlines shown in dimension design scheme for the label‖ Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research