Home India Ministry of Steel In exercise of the powers conferred by sub sections 1 and 2 ...
Date: 2018-02-20 Category: Extra Ordinary State: Union Government Country: India

In exercise of the powers conferred by sub sections 1 and 2 of section 16 of the

Issued by Ministry of Steel · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

Executive Summary: This document, titled the Steel and Steel Products Quality Control Order, 2018, outlines quality control measures for steel and steel products in India. It mandates conformity to Indian Standards and the use of Standard Marks issued by the Bureau of Indian Standards (BIS). The order comes into effect immediately upon publication in the Official Gazette, with specific effective dates for individual standards listed in the schedule. This order supersedes previous quality control orders from 2012, 2015 and 2017. Key Points / Main Content: * **Scope and Application:** * Applies to steel and steel products as defined by the Indian Standards specified in the Schedule. * Excludes products meant for export. * **Compliance and Certification:** * All steel and steel products must conform to the corresponding Indian Standard as specified in column 2 of the schedule. * Requires compulsory use of the Standard Mark under a license issued by the Bureau of Indian Standards. * The Bureau of Indian Standards is the certifying and enforcing authority. * **Enforcement and Penalties:** * Contravention of the order is punishable under Section 29 of the Bureau of Indian Standards Act, 2016. * **Standards Updates:** * Amendments or revisions to Indian Standards by the Bureau apply to this order from the date notified by the Bureau. * **Appeals Process:** * Appeals against decisions of the appropriate authority can be made to the Central Government. * The Central Government may consult an Empowered Committee for advice on appeals. * **Schedule of Standards:** * Specifies Indian Standards for various steel products, along with their ITCHS codes and effective dates (column 5). * Includes standards such as IS 1785, IS 6003, IS 6006, IS 14268, IS 277 and many others. * Some standards will cease to exist after a certain date as mentioned in the schedule. Impact Analysis: * **Steel Manufacturers:** * *Impact:* Must ensure their products conform to the specified Indian Standards and obtain necessary certifications from the Bureau of Indian Standards. * *Action Required:* Obtain licenses for Standard Marks, adhere to quality control requirements, and stay updated on any revisions or amendments to the standards. * **Bureau of Indian Standards:** * *Impact:* Responsible for certifying and enforcing the quality standards for steel and steel products. * *Action Required:* Issue licenses, conduct inspections, and take action against any violations of the order. * **Consumers/End Users:** * *Impact:* Assured of the quality and reliability of steel and steel products that meet the prescribed Indian Standards. * *Action Required:* Look for the Standard Mark on steel products to ensure compliance with the order. * **Central Government (Ministry of Steel):** * *Impact:* Oversees the implementation of the order and handles appeals against decisions of the appropriate authority. * *Action Required:* Constitute the Empowered Committee, review appeals, and issue necessary directives for effective enforcement. * **Appropriate Authority:** * *Impact:* Responsible for enforcing the provisions of this order. * *Action Required:* Ensure compliance with the order.

Key Entities Referenced

Bureau of Indian Standards: Certifying and enforcing authority for steel and steel products, and consultant to the Central Government. Bureau of Indian Standards Act, 2016: The Act under which the order is issued, specifically referencing subsections 1 and 2 of section 16. Ministry of Steel: The ministry to which an appeal can be made and which chairs the Empowered Committee. Directorate General of Foreign Trade: An organisation represented on the Empowered Committee. Empowered Committee: A committee constituted by the Central Government to advise on matters including disposal of appeals, chaired by the Secretary to the Government of India in the Ministry of Steel. Steel and Steel Products Quality Control Order, 2018: The title of the order being analyzed. New Delhi: Place of order. Official Gazette: The location where the order's publication date determines its effective date.
Official Source Record View Original Source →
See Full Document Text
jftLVªh laö Mhö ,yö&33004@99 REGD. NO. D. L.-33004/99 vlk/kj.k EXTRAORDINARY Hkkx II—[k.M 3—mi&[k.M (ii) PART II—Section 3—Sub-section (ii) izkf/dkj ls izdkf'kr PUBLISHED BY AUTHORITY la- 662] ubZ fnYyh] eaxyokj] iQjojh 20] 2018@iQkYxqu 1] 1939 No. 662] NEW DELHI, TUESDAY, FEBRUARY 20, 2018/PHALGUNA 1, 1939 इइइइ(cid:2)(cid:2)(cid:2)(cid:2)पपपपाााातततत मममम(cid:9)(cid:9)ंं(cid:9)(cid:9)ंं ााााललललयययय आआआआददददशशेेशशेे नई (cid:4)द(cid:6)ली, 16 फरवरी, 2018 ककककाााा....आआआआ.... 777755550000((((अअअअ))))....————भारतीय मानक (cid:24)यूरो अिधिनयम, 2016 (2016 का 11) क धारा 16 क उप धारा (1) और (2) $ारा %दत शि’य( का उपयोग करते +ए तथा इ/पात और इ/पात उ0पाद (गुणव3ा िनय5ं ण) आदशे , 2012, इ/पात और इ/पात उ0पाद (गुणव3ा िनय5ं ण) ि$तीय आदशे , 2012, इ/पात और इ/पात उ0पाद (गुणव3ा िनयं5ण) आदशे , 2015, और इ/पात और इ/पात उ0पाद (गणु व3ा िनयं5ण) आदशे , 2017 का अिध9मण करके, उन बात( के िसवाय अिध9ा<त करते +ए, िज<ह ? ऐसे अिध9मण से पूव A (cid:4)कया गया ह ै या करन े का लोप (cid:4)कया गया ह,ै क?Cीय सरकार यह मत रखत े +ए (cid:4)क सावAजिनक िहत म? ऐसा करना आवEयक ह,ै भारतीय मानक (cid:24)यूरो स ेपरामशA करन ेके पFात िनGिलिखत आदशे करती ह,ै नामशः- 1. संिIJ शीषकA और %ारंभ – (1) इस आदशे को इ/पात और इ/पात उ0पाद (गुणव3ा िनयं5ण) आदशे , 2018 कहा जाएगा। (2) यह आदशे शासक य राजप5 म ?इसके %काशन क ितिथ स े%वृत होगा। 2. पNरभाषाए ं– इस आदशे म ?जब तक (cid:4)क संदभ Aक आवEयकता न हो, - (क) ‘’अिधिनयम’’ का आशय भारतीय मानक (cid:24)यूरो अिधिनयम, 2016 (2016 का 11) ह;ै (ख) ‘उपयुOत %ािधकारी’ स ेकोई ऐसा अिधकारी अिभ%ेत ह-ै i. िजसका /त र इ/ पात म5ं ालय म ?अवर सिचव के / तर से कम न हो: ii. राQय सरकार के िजला उRोग के< C का महािनदेशक: iii. राQय सरकार अथवा संघ राQ य Iे5 के उRोग( के िनदशे क अथवा उRोग( के आयुO त; और iv. महािनदशे क, भारतीय मानक (cid:24)य ूरो $ारा नािमत एक अिधकारी (ग) ‘’आईटीसी (एचएस) कोड’’ का आशय अनसु ूची के कॉलम (4) म? िनTदU इंिडयन WेXस कलािस(cid:4)फकेशन (हारमोनाईQड िस/टम) कोXस ह।ै (घ) ‘’अनसु ूची’’ का आशय इस आदशे के साथ सलं Z अनसु ूची से ह।ै 995 GI/2018 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] (ङ) ‘’इ/पात और इ/पात उ0पाद’’ से आशय भारतीय मानक के शीषकA वाल े उन उ0पाद( स ेह ैजो(cid:4)क अनसु ूची के कॉलम (3) म ? िनTदU (cid:4)कए गए ह ै और जो अनसु ूची के कॉलम (2) म ? िनTदU भारतीय मानक के अंतगAत शािमल (cid:4)कए गए ह;ै (च) श(cid:24)द और अिभ]ि’ जो यहाँ %यु’ ह ैऔर पNरभािषत नह_ ह ैल(cid:4)े कन अिधिनयम के अतं गAत पNरभािषत ह,ै उनका आशय वही ह ैजो अिधिनयम के अंतगAत िनधाANरत ह।ै 3. लागू – (1) यह आदशे इ/पात और इ/पात उ0पाद( पर लागू होगा ल(cid:4)े कन यहाँ िन‘धNरत कुछ भी ऐस े उ0पाद( पर लाग ूनह_ होगा, जो िनयातA के िलए ह।b 4. मानक( का अनपु ालन - %0यके इ/पात और इ/पात उ0पाद अनुसूची के कॉलम (5) म? िनTदU तारीख से अनसु ूची के कॉलम (2) म ?िनTदU तदनु cपी भारतीय मानक को पूरा करेगा। 5. मानक िच<ह का अिनवायA उपयोग – भारतीय मानक (cid:24)यूरो $ारा जारी लाईसे<स के तहत %0येक इ/पात और इ/पात उ0पाद म ?मानक िच<ह अ(cid:4)ं कत होगा। 6. %माणन और %वAतन %ािधकारी - भारतीय मानक (cid:24)यरू ो इ/पात और इ/पात उ0पाद( के संबंध म? %माणन एवं %वतAन %ािधकारी होगा। 7. उ(cid:6)लंघन के िलए सजा-जो भी ]ि’ इस आदेश के (cid:4)कसी %ावधान का उ(cid:6)लंघन करता ह,ै वह अिधिनयम क धारा 29 के %ावधान( के अनसु ार दिं डत (cid:4)कया जाएगा। 8. भारतीय मानक( म ? सशं ोधन अथवा सधु ार %वृत होन े क ितिथ-य(cid:4)द अनुसूची म? िनTदU (cid:4)कसी भारतीय मानक के संदभA म ? शीषकA , कायAIे5, fेड, परीIण क आवEयकता अथवा (cid:4)कसी अ<य परै ामीटर म ?कोई सशं ोधन अथवा सधु ार (cid:4)कया जाता ह,ै तो इस आदशे के %ावधान( म ? (cid:4)कया गया यह संशोधन अथवा सुधार (cid:24)यरू ो $ारा इस संबंध म ? अिधसिू चत क गई ितिथ स े%भावी होगा, मानो (cid:4)क इस आदेश म ?सशं ोधन अथवा सधु ार उस ितिथ से (cid:4)कया गया हो। 9. अपनी:- (1) कोई भी ]ि’ जो उपयु’ %ािधकारी के िनणयA से संयुU नह_ ह,ै वह के<Cीय सरकार के पास अपील कर सकता ह।ै (2) के<Cीय सरकार अपील का िनपटान करने समेत (cid:4)कसी भी मामले पर सलाह %दान करन े के उgेEय से एक अिधकार %ाJ सिमित का गठन कर सकती ह ै िजसम? अiयI के cप म ? इ/पात मं5ालय म? भारत सरकार के सिचव तथा %ितिनिध के cप म ? भारतीय मानक (cid:24)यूरो ,िवदशे ]ापार महािनदशे ालय और इ/पात मं5ालय %0यके स े एक एक सद/य शािमल ह(ग।े (3) के<Cीय सरकार अपीलकता A को सनु वाई का एक अवसर दने े के पFात और अिधकार %ाJ सिमित $ारा दी गई सलाह पर िवचार करन ेके पFात ऐसा आदशे जारी कर सकती हिै जसे वह उपयु’ समझती हो ,।” अअअअननननससुुससुु चचूूचचूू ीीीी (cid:1)(cid:1)(cid:1)(cid:1)मममम सससस..ंं..ंं भभभभााााररररततततीीीीयययय भभभभााााररररततततीीीीयययय ममममााााननननकककक ककककाााा शशशशीीीीषषषषकक(cid:17)(cid:17)कक(cid:17)(cid:17) आआआआईईईईटटटटीीीीससससीीीी((((एएएएचचचचएएएएसससस)))) (cid:18)(cid:18)(cid:18)(cid:18)भभभभाााावववव कककक(cid:20)(cid:20)(cid:20)(cid:20) ििििततततििििथथथथ ममममााााननननकककक ((((1111)))) ((((2222)))) ((((3333)))) ((((4444)))) ((((5555)))) 1. आईएस ि(cid:7)-(cid:8)(cid:9)े(cid:8)ड कं(cid:14)(cid:15)ट के िलए (cid:18)लेन हाड(cid:4)- 72171010 त&काल (cid:7)भाव से 1785 : (cid:21)ॉन इ(cid:8)पात क(cid:15) तार के िलए 72179091 (पाट(cid:4) 1) िविनदश(cid:28) न;;;; भाग 1 को"ड –––– (cid:21)ान (cid:8)(cid:9)ेस 72179099 1983 $रिल%ड तार 2. आईएस ि(cid:7)-(cid:8)(cid:9)े(cid:8)ड कं(cid:14)(cid:15)ट के िलए (cid:18)लेन हाड(cid:4)- 72171010 त&काल (cid:7)भाव से 1785 : (cid:21)ॉन इ(cid:8)पात क(cid:15) तार ;;;; (cid:21)ान तार के ’प 72179091 (भाग 2) : म) भाग 2222 72179099 1983 3. आईएस ि(cid:7)-(cid:8)(cid:9)े(cid:8)ड कं(cid:14)(cid:15)ट के िलए इ*ड$)टड तार 72171010 त&काल (cid:7)भाव से 6003 : हते ु िविनदश(cid:28) न 72179091 2010 72179099¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 3 4. आईएस ि(cid:7)-(cid:8)(cid:9)े(cid:8)ड कं(cid:14)(cid:15)ट के िलए अनको$टड 73121030 त&काल (cid:7)भाव से 6006 : (cid:8)(cid:9)ेस $रिल%ड (cid:8)(cid:9))ड के िलए िविनदश(cid:28) न 2014 5. आईएस -यूजन बॉि*डड इपो2सी 72142090 त&काल (cid:7)भाव से 13620 : को$टड $रइनफो5सग बास(cid:4)-िविनदश(cid:28) न 72159090 1993 6. आईएस ि(cid:7)-(cid:8)(cid:9)े(cid:8)ड कं(cid:14)(cid:15)ट के िलए अनको$टड 73121030 त&काल (cid:7)भाव से 14268 : (cid:8)(cid:9)ेस $रिल%ड लो $रले2सेशन क(cid:15) सात 1995 वायर ((cid:18)लाइ) (cid:8)(cid:9))ड के िलए िविनदश(cid:28) न 7. आईएस गेलवोनाई7ड (cid:8)टील शी8स ((cid:18)लेन एवं 72104100 त&काल (cid:7)भाव से 277 : 2003 को’गेटेड)- िविनदश(cid:28) न 72104900 72123010 72123090 8. आईएस म;यवत< और उ? ताप सेवाए ंिजसके 72085110 त&काल (cid:7)भाव से 2002 : अंतग(cid:4)त बॉयलर भी ह,ै के िलए दाव 72085120 72111420 2009 पाA के िलए (cid:8)टील (cid:18)लेट 72085210 72111490 72085220 72119011 72111300 72119090 9. आईएस म;यम और िनB ताप पर उपयोग के 72085110 72111300 त&काल (cid:7)भाव से 2041 : िलए दाब पाAC के िलए इ(cid:8)पात (cid:18)लेट - 72085120 72111420 2009 िविनदश(cid:28) न 72085210 72111490 72085220 72119090 10. आईएस साधारण अवसंरचना (cid:7)योजनC के िलए 72061090 त&काल (cid:7)भाव से 2830 : इ(cid:8)पात पुनब(cid:28)"लन के िलए काब(cid:4)न 72071190 2012 इ(cid:8)पात ढलवा िबलेट इनगोट, िबलेट, 72071290 Hलमू और िस"ली - िविनदश(cid:28) न 72071920 72071990 11. कंकरीट पुनब(cid:28)""न के िलए उ? शिI 72131090 त&काल (cid:7)भाव से आईएस वाले िव’िपत इ(cid:8)पात छड़C और तार – 72142090 िविनदश(cid:28) न 1786 : 2008 नोट:- यह आदशे 8 एमएस से कम आकार के उ? शिI वाले िव’िपत इ(cid:8)पात छड़े और तार के िलए लागू नहM ह।ै 12. आईएस पूण(cid:4)तया (cid:7)N(cid:14)यागत (cid:7)कार क(cid:15) शीत 72251920 त&काल (cid:7)भाव से 648 : 2006 बेि"लत गैर-अिभकेि*Oत िवPुत इ(cid:8)पात 72261920 शीट तथा पRी - िविनदश(cid:28) न 13. आईएस कण के अनुकूल िवPुत इ(cid:8)पात शीट 72251100 त&काल (cid:7)भाव से 3024 : तथा पRी। 72261100 2015 14. आईएस शीत बेि"लत गैर अनुकूल िवPुत 72251920 त&काल (cid:7)भाव से 15391 : इ(cid:8)पात शीट तथा (cid:8)(cid:9)ीप-अध(cid:4) (cid:7)सं(cid:8)कृत4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 2003 (cid:7)कार - िविनदश(cid:28) न 72261920 72091720 72091730 72091790 आईएस तU बेि"लत म;यम तथा उ? त*यता त&काल (cid:7)भाव से 15. 2062 : अवसरं चना इ(cid:8)पात। 72139090 72119012 72082740 72083930 2011 नोट:- यह आदशे 6 िमलीमीटर से *यून 72139990 72119090 72082790 72083940 Vा स या मोटाई और 50 िमलीमीटर x 72149990 72139190 72083610 72083990 50 िमलीमीटर x 6 िमलीमीटर से कम 72161000 72139990 72083620 72085110 के अवसरं चना&मक शलाका और छड़C 72162100 72149190 72083630 72085120 के िलए लागू नहM ह।ै 72162200 72149990 72083640 72085130 72163100 72082510 72083690 72085140 72163200 72082520 72083710 72085190 72163300 72082530 72083720 72085210 72164000 72082540 72083730 72085220 72165000 72082590 72083740 72085230 72111300 72082610 72083790 72085240 72111410 72082620 72083810 72085290 72111420 72082630 72083820 72085310 72111430 72082640 72083830 72085320 72111440 72082690 72083840 72085330 72111450 72082710 72083890 72085340 72111460 72082720 72083910 72085390 72111490 72082730 72083920 72089000 16. आईएस 432 कॉन(cid:14)(cid:15)ट $रइनफोसम(cid:4) )ट के िलए माइ"ड 72139190 72279090 त&काल (cid:7)भाव से पाट(cid:4) 1 : (cid:8)टील और मीिडयम टेनसाइल (cid:8)टील 72139990 72283019 1982 बॉस(cid:4) तथा हाड(cid:4)-(cid:21)ॉन (cid:8)टील वायर: पाट(cid:4) 72149190 72283029 1 माइ"ड (cid:8)टील और मीिडयम 72149990 72286099 टेनसाइल (cid:8)टील बॉस(cid:4) 72159090 17. आईएस कॉन(cid:14)(cid:15)ट $रइनफोसम(cid:4) )ट के िलए माइ"ड 721710 72299040 त&काल (cid:7)भाव से 432 पाट(cid:4) 2 (cid:8)टील और मीिडयम टेनसाइल (cid:8)टील 721790 72299059 : 1982 बॉस(cid:4) तथा हाड(cid:4)-(cid:21)ॉन (cid:8)टील वायर: पाट(cid:4) 72299031 72299090 2 हाड-(cid:4)(cid:21)ॉन (cid:8)टील वायर 72299033 18. आईएस को"ड $रXू7ड लो काब(cid:4)न (cid:8)टील शीट 720915 72255010 त&काल (cid:7)भाव से 513* : और (cid:8)(cid:9)ीप 720916 72255020 2008 720917 72259900 (*यह मानक 720918 72269210 18 माच(cid:4), 720925 72269220 2018 के 720926 72269920 बाद समाU 720927 72269930 हो जाएगा।) 720928 72269940¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 5 72099000 72269952 721123 72269990 72119090 19. आईएस 513 को"ड $रXू7ड काब(cid:4)न (cid:8)टील शी8स 720915 72255010 त&काल (cid:7)भाव से (पाट(cid:4) 1) : तथा (cid:8)(cid:9)ीप भाग 1 को"ड फो5मग और 720916 72255020 2016 (cid:21)ॉइंग उYेZय (छठा संशोधन) 720917 72259900 720918 72269210 720925 72269220 720926 72269920 720927 72269930 720928 72269940 72099000 72269952 721123 72269990 72119090 20. आईएस 513 को"ड $रXू7ड लो काब(cid:4)न (cid:8)टील शी8स 720915 72255010 त&काल (cid:7)भाव से (भाग 2): तथा (cid:8)(cid:9)ीप भाग 2 हाई टेनसाइल और 720916 72255020 2016 ब]-चरण (cid:8)टील (छठा संशोधन) 720917 72259900 720918 72269210 720925 72269220 720926 72269920 720927 72269930 720928 72269940 72099000 72269952 721123 72269990 72119090 21. आईएस हॉट रो"ड काब(cid:4)न (cid:8)टील शीट और (cid:8)(cid:9)ीप 720825 72089000 त&काल (cid:7)भाव से 1079*: - िविनदश(cid:28) न 720826 72111300 2009 (यह 720827 721114 मानक 29 720836 721119 जून 2018 के 720837 72119090 बाद समाU 720838 722530 हो जाएगा।) 720839 722540 720840 72259900 720852 722691 720853 722699 720854 22. आईएस हॉट रो"ड काब(cid:4)न (cid:8)टील शीट, (cid:18)लेट और 720825 72089000 त&काल (cid:7)भाव से 1079 : (cid:8)(cid:9)ीप 720826 72111300 2017 720827 721114 720836 721119 720837 721190906 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 720838 722530 720839 722540 720840 72259900 720852 722691 720853 722699 720854 23. आईएस फो5जग के िलए काब(cid:4)न (cid:8)टील िबले8स, 72071120 72149190 त&काल (cid:7)भाव से 1875 : Hल_ूस, (cid:8)लैHस और बॉस(cid:4) 72071190 72149990 1992 72071220 72159090 72071290 72249040 720719 72249091 72072010 72249099 72072090 72283029 72286099 24. आईएस मेटल आक(cid:4) वै‘"डग इले2(cid:9)ोaस के िलए 72061090 72139910 त&काल (cid:7)भाव से 2879 : माइ"ड (cid:8)टील 72071190 72149990 1998 72071290 72241000 72071920 72249091 72071990 72249099 72132010 72279090 72139110 25. आईएस (cid:8)टील चेकड (cid:4)(cid:18)ले8स 72081000 72259900 त&काल (cid:7)भाव से 3502 : 720840 72269130 2009 721114 72269190 721190 72269910 72254019 72269990 26. आईएस को"ड रो"ड (cid:8)टील (cid:8)(cid:9)ी(cid:18)स (बॉ2स 721123 72262030 त&काल (cid:7)भाव से 5872 : (cid:8)ट्ै‘पcस) 721129 72269210 1990 721220 72269930 721230 72269952 721240 72269990 721250 27. आईएस (cid:8)(cid:9)2चरल फो5मग और -ल)‘गग उYेZय 720825 720840 72111300 72254019 त&काल (cid:7)भाव से 5986*: के िलए हॉट रो"ड (cid:8)टील -लटै उ&पाद 720826 720851 721114 72254020 2011 (यह 720827 720852 721119 72254030 मानक 29 720836 720853 72119012 72259900 जून 2018 के 720837 720854 72119090 722691 बाद समाU 720838 72089000 72253090 722699 हो जाएगा।) 720839 72254013 28. आईएस फो5मग और -ल)‘गग उYेZयC के िलए 720825 720840 72111300 72254019 त&काल (cid:7)भाव से 5986 : हॉट रो"ड (cid:8)टील शीट, (cid:18)लेट और (cid:8)(cid:9)ीप 720826 720851 721114 72254020¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 7 2017 720827 720852 721119 72254030 720836 720853 72119012 72259900 720837 720854 72119090 722691 720838 72089000 72253090 722699 720839 72254013 29. आईएस लो (cid:7)ेशर िलNdNफएबल गैस 720825 720839 72089000 722540 त&काल (cid:7)भाव से 6240 : िसिलि*डस(cid:4) के िविनमा(cid:4)ण के िलए हॉट 720826 720852 721114 72259900 2008 रो"ड (cid:8)टील (cid:18)लेट (6 एमएम तक) शीट 720827 720853 721119 722691 और (cid:8)(cid:9)ीप 720837 720854 72119090 722699 720838 72253090 30. आईएस eाईट बॉस(cid:4) के उ&पादन के िलए हॉट 721320 721491 72283021 72286091 त&काल (cid:7)भाव से 7283 : रो"ड बॉस(cid:4) और इंजीिनयfरग 721391 721499 72283022 72286092 1992 अनु(cid:7)योगC के िलए मशी*ड पाट(cid:4) 721399 72159090 72283023 72286093 72143000 72279090 72283029 72286099 31. आईएस सामा*य इंजीिनयfरग उYेZयC के िलए 72139190 त&काल (cid:7)भाव से 7887 : माइ"ड (cid:8)टील वायर रॉड 72139990 1992 72279090 32. आईएस वेि"डड gूHस और पाइपC के िलए हॉट 720825 721114 त&काल (cid:7)भाव से 10748 : रो"ड (cid:8)टील (cid:8)(cid:9)ीप 720826 721119 2004 720827 72119090 720836 72253090 720837 72259900 720838 722691 720839 722699 72089000 33. आईएस को"ड रो‘लग उYेZयC के िलए हॉट 720825 721114 त&काल (cid:7)भाव से 11513 : रो"ड काब(cid:4)न (cid:8)टील (cid:8)(cid:9)ीप 720826 721119 2011 (यह 720827 721190907 मानक 27 720836 2253090 मई, 2018 720837 72259900 के बाद 720838 722691 समाU हो जाएगा।) 720839 722699 72089000 34. आईएस को"ड रो‘लग उYेZय के िलए हॉट रो"ड 720825 720837 721114 72259900 त&काल (cid:7)भाव से 11513 : काब(cid:4)न (cid:8)टील (cid:8)(cid:9)ीप 720826 720838 721119 722691 2017 720827 720839 721190907 722699 720836 72089000 2253090 35. आईएस वेि"डड gूHस और पाईपC के िलए हॉट 721114 त&काल (cid:7)भाव से 15647 : रो"ड (cid:8)टील नैरो िवaद (cid:8)(cid:9)ीप 721119 2006 721190908 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 36. आईएस हाई काब(cid:4)न (cid:8)टील वायर रॉaस – 72139190 20 जुलाई, 2018 7904 : िविनदश(cid:28) न 72139990 1995 37. आईएस गेलवनाइ7ड (cid:8)टील शी8स और dॉय"स 72107000 20 फरवरी, 2018 14246 : को िनरंतर पहले प)ट Nकया गया 72124000 2013 72259900 38. आईएस अ"यूिमिनयम ‘जक अलॉय मटे ािलक 72107000 त&काल (cid:7)भाव से 15965 : को$टड (cid:8)टील (cid:8)(cid:9)ीप और शीट् ((cid:18)लेन) 72124000 2012 को पहले प)ट Nकया गया 72259900 ननननोोोोटटटट : अनुसूची के कॉलम (4) म? िनTदk इ/पात और इ/पात उ0पाद( के आईटीसी (एचएस) कोड /वभावगत जैनNरक और सकं ेतक ह।ै [फा.... स..ं.. 1(1)/2015-टीडी (पाटA फाइल) lिचका चौधरी गोिवल,,,, संयु’ सिचव MINISTRY OF STEEL ORDER New Delhi, the 16th February, 2018 S.O. 750(E).—In exercise of the powers conferred by sub-sections (1) and (2) of section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016) and in the supersession of the Steel and Steel Products (Quality Control) Order, 2012, the Steel and Steel Products (Quality Control) Second Order, 2012, the Steel and Steel Products (Quality Control) Order, 2015 and the Steel and Steel Products (Quality Control) Order, 2017, except as respects things done or omitted to be done before such supersession, the Central Government, being of the opinion that it is necessary or expedient so to do in the public interest, after consulting the Bureau of Indian Standards, hereby makes the following Order, namely:— 1. Short title and commencement. – (1) This Order may be called the Steel and Steel Products (Quality Control) Order, 2018. (2) This order shall come into force on the date of its publication in the Official Gazette. 2. Definitions .- In this Order, unless the context otherwise requires, - (a) “Act” means the Bureau of Indian Standards Act, 2016 (11 of 2016); (b) “appropriate authority” means, - (i) an officer not below the rank of an Under Secretary in the Ministry of Steel; or (ii) the General Manager of a District Industries Center in a state; or (iii) the Director of Industries or Commissioner of Industries in a State or Union territory; and (iv) an officer nominated by the Director General, Bureau of Indian Standards; (c) “ITC(HS) Codes” means the Indian Trades Classification (Harmonised System) Codes specified in column (4) of the Schedule; (d) “Schedule” means the Schedule appended to this Order;¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 9 (e) “steel and steel products” means the products having title of Indian Standard as specified in column (3) of the Schedule which are covered under the Indian Standard specified in column (2) thereof; (f) words and expressions used herein and not defined, but defined in the Act shall have the same meaning as assigned to them in the Act. 3. Application.- (1) This Order shall apply to steel and steel products, but nothing herein shall apply to such products meant for export. 4. Conformity to Standards.- Every steel and steel products shall conform to the corresponding Indian Standard specified in column (2) of the Schedule with effect from the corresponding date specified in column (5) thereof. 5. Compulsory use of Standard Mark.- Every steel and steel product shall bear the Standard Mark under a licence issued by the Bureau of Indian Standards. 6. Certification and Enforcement Authority.- The Bureau of Indian Standards shall be the certifying and enforcing authority in respect of the steel and steel products. 7. Penalty for Contravention. - Any person who contravenes any of the provisions of this Order shall be punishable in accordance with the provisions of Section 29 of the Act. 8. Date of effect of amendment or revision in Indian Standards. - Where any amendment or revision is made by the Bureau in the title, scope, grade, testing requirements or any other parameters with respect to any Indian Standard specified in the Schedule, such amendment or revision shall apply to the provisions of this Order with effect from the date notified by the Bureau in this behalf, as if such amendment or revision are made under this Order with effect from such date. 9. Appeal: - (1) Any person who is aggrieved by any decision of the appropriate authority may prefer an appeal to the Central Government. (2) The Central Government may constitute an Empowered Committee consisting of the Secretary to the Government of India in the Ministry of Steel as Chairperson and one person each to represent the Bureau of Indian Standards, the Directorate General of Foreign Trade and the Ministry of Steel as members, to advise it on any matter, including disposal of appeal. (3) The Central Government may, after giving the appellant an opportunity of hearing and after considering the advice given by the Empowered Committee, pass such order as it may deem fit. SCHEDULE Sl. No. Indian Title of Indian Standard ITC(HS) Date of effect Standard (1) (2) (3) (4) (5) 1. IS 1785 Specification for plain Hard- 72171010 With (Part-1) : drawn Steel Wire For Pre-stressed 72179091 immediate 1983 Concrete; Part 1 Cold - Drawn effect 72179099 Stress relieved Wire 2. IS 1785 Plain Hard-drawn Steel Wire for 72171010 With (Part-2) : Pre-stressed Concrete; Part 2 as 72179091 immediate 1983 Drawn Wire effect 72179099 3. IS 6003 : Indented Wire for Pre-stressed 72171010 With 2010 Concrete - Specification 72179091 immediate 72179099 effect 4. IS 6006 : Uncoated Stress Relieved Strand 73121030 With 2014 For Pre-stressed Concrete - immediate Specification effect 5. Fusion Bonded Epoxy Coated 72142090 With IS 13620 : Reinforcing Bars - Specification 72159090 immediate 1993 effect 6. IS 14268 : Uncoated Stress Relieved Low 73121030 With 1995 Relaxation Seven- wire (ply) immediate Strand for Pre-stressed Concrete - effect Specification10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 7. IS 277 : Galvanized Steel Sheets (Plain 72104100 With 2003 and Corrugated) - Specification 72104900 immediate effect 72123010 72123090 8. IS 2002 : Steel plates for pressure vessels 72085110 72111420 With 2009 for intermediate and high 72085120 72111490 immediate temperature service including effect 72085210 72119011 boilers 72085220 72119090 72111300 9. IS 2041 : Steel Plates for Pressure Vessels 72085110 72111300 With 2009 Used at Moderate and Low 72085120 72111420 immediate Temperature - Specification effect 72085210 72111490 72085220 72119090 10. IS 2830 : Carbon steel cast billet ingots, 72061090 With 2012 billets, blooms and slabs for re- 72071190 immediate rolling into steel for general effect 72071290 structural purposes - Specification 72071920 72071990 11. IS 1786 : High strength deformed steel bars 72131090 With 2008 and wires for concrete 72142090 immediate reinforcement- Specification effect Note: This order is not applicable for High strength deformed steel bars and wires of sizes less than 8 mm. 12. IS 648 : Cold rolled non-oriented 72251920 With 2006 electrical steel sheet and strip - 72261920 immediate Fully processed type- effect Specification 13. IS 3024 : Grain Oriented Electrical Steel 72251100 With 2015 Sheet and Strip 72261100 immediate effect 14. IS 15391 : Cold Rolled Non-Oriented 72251920 With 2003 Electrical Steel Sheet and Strip - 72261920 immediate Semi-Processed Type- effect 72091720 Specification 72091730 72091790 Hot rolled medium With 15. IS 2062 : and high tensile 72139090 72119012 72082740 72083930 immediate 2011 structural steel 72139990 72119090 72082790 72083940 effect Note: This order is not applicable 72149990 72139190 72083610 72083990 for bars and rods of diameter or 72161000 72139990 72083620 72085110 thickness less 72162100 72149190 72083630 72085120 than 6 mm and 72162200 72149990 72083640 72085130 structurals below 72163100 72082510 72083690 72085140 50 mm x 50 mm x 6 mm) 72163200 72082520 72083710 72085190 72163300 72082530 72083720 72085210 72164000 72082540 72083730 72085220 72165000 72082590 72083740 72085230 72111300 72082610 72083790 72085240 72111410 72082620 72083810 72085290 72111420 72082630 72083820 72085310 72111430 72082640 72083830 72085320 72111440 72082690 72083840 72085330 72111450 72082710 72083890 72085340 72111460 72082720 72083910 72085390 72111490 72082730 72083920 72089000¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 11 16. IS 432 : Mild Steel and Medium Tensile 72139190 72279090 With Part 1 : Steel Bars and Hard–Drawn Steel 72139990 72283019 immediate 1982 Wire for Concrete Reinforcement: effect 72149190 72283029 Part 1 Mild steel and medium 72149990 72286099 tensile steel bars 72159090 17. IS 432 : Mild steel and Medium Tensile 721710 72299040 With Part 2 : steel bars and Hard–Drawn Steel 721790 72299059 immediate 1982 Wire for Concrete effect 72299031 72299090 Reinforcement: Part 2 Hard- 72299033 Drawn Steel Wire 18. IS 513* : Cold reduced low carbon steel 720915 72255010 With 2008 sheets and strips 720916 72255020 immediate 720917 72259900 effect (* This 720918 72269210 standard 720925 72269220 shall cease 720926 72269920 to exist after 18th 720927 72269930 March, 720928 72269940 2018) 72099000 72269952 721123 72269990 72119090 19. IS 513 Cold reduced carbon steel sheets 720915 72255010 With (Part 1) : and strip Part 1 Cold Forming and 720916 72255020 immediate 2016 Drawing Purpose (Sixth effect 720917 72259900 Revision) 720918 72269210 720925 72269220 720926 72269920 720927 72269930 720928 72269940 72099000 72269952 721123 72269990 72119090 20. IS 513 Cold reduced low carbon steel 720915 72255010 With (Part 2) : sheets and strip Part 2 High 720916 72255020 immediate 2016 Tensile and Multi-phase Steel effect 720917 72259900 (Sixth Revision) 720918 72269210 720925 72269220 720926 72269920 720927 72269930 720928 72269940 72099000 72269952 721123 72269990 72119090 21. IS 1079* : Hot Rolled Carbon Steel Sheet, 720825 72089000 With 2009 Plate and Strip 720826 72111300 immediate 720827 721114 effect (This 720836 721119 standard 720837 72119090 shall cease 720838 722530 to exist after 29th 720839 722540 June, 720840 72259900 2018) 720852 722691 720853 722699 720854 22. Hot Rolled Carbon Steel Sheet, 720825 72089000 With IS 1079 : Plate and Strip 720826 72111300 immediate 2017 720827 721114 effect12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 720836 721119 720837 72119090 720838 722530 720839 722540 720840 72259900 720852 722691 720853 722699 720854 23. IS 1875 : Carbon steel billets, blooms, slabs 72071120 72149190 With immediate 1992 and bars for forgings 72071190 72149990 effect 72071220 72159090 72071290 72249040 720719 72249091 72072010 72249099 72072090 72283029 72286099 24. IS 2879 : Mild steel for metal arc welding 72061090 72139910 With 1998 electrodes 72071190 72149990 immediate 72071290 72241000 effect 72071920 72249091 72071990 72249099 72132010 72279090 72139110 25. IS 3502 : Steel Chequered Plates 72081000 72259900 With 2009 720840 72269130 immediate 721114 72269190 effect 721190 72269910 72254019 72269990 26. IS 5872 : Cold Rolled Steel Strips (Box 721123 72262030 With 1990 Strappings) 721129 72269210 immediate 721220 72269930 effect 721230 72269952 721240 72269990 721250 27. IS 5986* : Hot Rolled Steel Flat Products for 720825 720840 72111300 72254019 With 2011 Structural Forming and Flanging 720826 720851 721114 72254020 immediate Purposes 720827 720852 721119 72254030 effect (This 720836 720853 72119012 72259900 standard 720837 720854 72119090 722691 shall cease 720838 72089000 72253090 722699 to exist after 29th 720839 72254013 June, 2018) 28. IS 5986 : Hot Rolled Steel Sheet, Plate and 720825 720840 72111300 72254019 With 2017 Strip for Forming and Flanging 720826 720851 721114 72254020 immediate purposes 720827 720852 721119 72254030 effect 720836 720853 72119012 72259900 720837 720854 72119090 722691 720838 72089000 72253090 722699 720839 72254013 29. IS 6240 : Hot Rolled Steel Plate (up to 6 720825 720839 72089000 722540 With 2008 mm) Sheet and Strip for the 720826 720852 721114 72259900 immediate Manufacture of Low Pressure 720827 720853 721119 722691 effect Liquefiable Gas Cylinders 720837 720854 72119090 722699 720838 72253090 30. IS 7283 : Hot Rolled bars for production of 721320 721491 72283021 72286091 With 1992 bright bars and machined parts 721391 721499 72283022 72286092 immediate for engineering applications 721399 72159090 72283023 72286093 effect 72143000 72279090 72283029 72286099 31. IS 7887 : Mild steel wire rods for general 72139190 With 1992 engineering purposes 72139990 immediate 72279090 effect¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 13 32. IS 10748: Hot Rolled Steel Strip for Welded 720825 721114 With 2004 Tubes and Pipes 720826 721119 immediate 720827 72119090 effect 720836 72253090 720837 72259900 720838 722691 720839 722699 72089000 33. IS 11513 : Hot Rolled Carbon Steel Strip For 720825 721114 With 2011 Cold Rolling Purposes 720826 721119 immediate (This 720827 721190907 effect standard 720836 2253090 shall cease 720837 72259900 to exist 720838 722691 after 27th 720839 722699 May, 72089000 2018) 34 IS 11513 : Hot Rolled Carbon Steel Strip For 720825 720837 721114 72259900 With 2017 Cold Rolling Purposes 720826 720838 721119 722691 immediate 720827 720839 721190907 722699 effect 720836 72089000 2253090 35. IS 15647 : Hot rolled steel narrow width 721114 With 2006 strip for welded tubes and pipes 721119 immediate 72119090 effect 36. IS 7904 : High Carbon Steel Wire Rods – 72139190 20th July, 2018 1995 Specification 72139990 37. IS 14246 : Continuously pre-painted 72107000 20th February , 2013 galvanized steel sheets and coils 72124000 2018 72259900 38. IS 15965 : Pre–painted aluminium zinc alloy With 2012 metallic coated steel strip and 72107000 immediate sheet (plain) 72124000 effect 72259900 Note : The ITC(HS) Codes of steel and steel products specified in column (4) of the Schedule are generic and indicative in nature. [F. No. 1(1)/2015-TD (Part File)] RUCHIKA CHAUDHRY GOVIL, Jt. Secy. Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research