Date: 2026-07-25Category: Extra OrdinaryState: Union GovernmentCountry: India
In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments to Indian standards,
**Executive Summary**
The Bureau of Indian Standards (BIS) notified amendments to eight specific Indian Standards on July 21, 2026, in accordance with the BIS Rules, 2018. These amendments, established on July 20, 2026, cover various sectors including automotive, consumer packaging, and industrial equipment. Current versions of these standards without the amendments will remain valid until a deadline of January 19, 2027.
**Key Points / Main Content**
**Notification Authority and Governance**
* The notification is issued by the Department of Consumer Affairs, Bureau of Indian Standards, under Sub-rule (1) of Rule 15 of the BIS Rules, 2018.
* The amendments were officially established on July 20, 2026.
**Amendments to Food and Beverage Packaging**
* **IS 14407 : 2023:** Amendment No. 1 regarding specifications for aluminum cans for beverages.
* **IS 18427 : 2024:** Amendment No. 1 regarding specifications for three-piece round open-top metal cans for foods and beverages.
* **IS 18800 : 2023:** Amendment No. 1 regarding specifications for stainless steel feeding bottles for infants.
**Amendments to Automotive and Industrial Standards**
* **IS 16722 : 2018:** Amendment No. 2 regarding Radio Frequency Identification (RFID) systems for automotive applications.
* **IS 3196 (Part 1) : 2013:** Amendment No. 5 regarding welded low carbon steel cylinders for Liquefied Petroleum Gases (LPG).
* **IS 17891 (Part 3) : 2023:** Amendment No. 1 regarding quality acceptance criteria for O-rings in fluid power systems.
**Amendments to Sporting and Transport Equipment**
* **IS 1281 : 2025:** Amendment No. 1 for bicycle cranks and chain wheels.
* **IS 15841 : 2009:** Amendment No. 1 for snowboard-boots and their interface with ski-bindings.
**Transition Timeline**
* All listed standards will continue to be valid without the new amendments until January 19, 2027.
**Impact Analysis**
**Manufacturers of Subject Goods (Bicycles, LPG cylinders, Food/Beverage cans, Automotive RFID, and Infant products)**
**Impact**
Manufacturers are now subject to updated specifications and quality criteria for their products as per the established amendments.
**Action Required**
Affected manufacturers must review the specific amendments (ranging from No. 1 to No. 5) for their respective standards and update their production and quality control processes to ensure compliance before January 19, 2027.
**Bureau of Indian Standards (BIS) and Quality Inspectors**
**Impact**
The body is responsible for enforcing the updated standards and managing the transition period.
**Action Required**
Regulatory officials must implement the new criteria in their assessment procedures and ensure that all certifications issued or renewed after January 19, 2027, adhere strictly to the amended versions of the standards.
Key Entities Referenced
Bureau of Indian Standards (BIS): The national standards body of India responsible for notifying and establishing amendments to various industrial and consumer product standards.
Bureau of Indian Standards Rules, 2018: The statutory framework, specifically Rule 15(1), under which the reported amendments to Indian Standards were established.
Department of Consumer Affairs: The administrative department under which the Bureau of Indian Standards operates to oversee consumer protection and quality standards.
S. K. Verma: Scientist F and Deputy Director General (Hallmarking) of BIS, who officially notified the establishment of these standard amendments.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-27072026-274864
xxxGIDHxxx
CG-DL-E-27072026-274864
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 471] नई दिल्ली, िजनिार, िुलाई 25, 2026/श्रािण 3, 1948
No. 471] NEW DELHI, SATURDAY, JULY 25, 2026/SHRAVAN 3, 1948
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल े जिभाग)
अजधसचू ना
नई दिल्ली, 21 िुलाई, 2026
सिं भ:भ HQ-PUB015/1/2020-PUB-BIS (1576).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ेंभारतीय मानक ब्यरू ो एतिद्वारा अजधसूजचत करता ह ैइसमें सलं ग्न अनूसूची में दिय ेगय ेमानकों
में संिोधन दकय ेगय ेह|ैं
5690 GI/2026 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, सिं ोधनों की सख्ं या सिं ोधनों की जतजथ िब तक
स.ं एि ं जतजथ प्रजतस्ट्थापन जतजथ मानक तीसरे
िर् भतथा िीर्कभ
स्ट्तभं म ेंइंजगत
सिं ोधन के जबना
भी लाग ूरहगे ा
(1) (2) (3) (4) (5)
1 आई एस 1281 : 2025 संिोधन संख्या 1 20 िुलाई 2026 19 िनिरी 2027
साइदकल — क्रैंक और चेन व्हील् — िुलाई 2026
जिजिजि (चौथा पनु रीक्षण)
20 िुलाई 2026 19 िनिरी 2027
2 आई एस 3196 (भाग 1) : 2013 संिोधन संख्या 5
अल्प िाब द्रिणीय गैसो के जलए 5 िुलाई 2026
जलटर स ेअजधक िल क्षमता िाले
बेजल्डत अल्प काबभन इस्ट्पात के
जसललंडर
भाग 1 द्रजित पैरोजलयम गैस (एल पी
िी) के जलये जसललंडर — जिजिजि
(छठा पुनरीक्षण)
20 िुलाई 2026 19 िनिरी 2027
3 आई एस 14407 : 2023 संिोधन संख्या 1
पेय पिाथों के जलए एल्युजमजनयम के िुलाई 2026
जडब्बे — जिजिजि
(पहला पुनरीक्षण)
20 िुलाई 2026 19 िनिरी 2027
4 आई एस 15841 : 2009 संिोधन संख्या 1
आई एस ओ 11634 : 1996 िुलाई 2026
स्नोबोडभ-बूट — अंतपपभष्ठ सजहत स्ट्की-
बाइंलडंग
20 िुलाई 2026 19 िनिरी 2027
5 आई एस 16722 : 2018 संिोधन संख्या 2
स्ट्िचाजलत अनुप्रयोगों के जलए रेजडयो- िुलाई 2026
आिपजि पहचान (आरएफआईडी)
प्रणाली — जिजिजि[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
20 िुलाई 2026 19 िनिरी 2027
6 आई एस 17891 (भाग 3) : 2023 संिोधन संख्या 1
आई एस ओ 3601-3 : 2005 िुलाई 2026
द्रि पािर पजिजतयां — ओ-ररंग्स
भाग 3 गुणता स्ट्िीकपजत मापिडं
20 िुलाई 2026 19 िनिरी 2027
7 आई एस 18427 : 2024 संिोधन संख्या 1
खाद्य और पेय पिाथों के जलए तीन िुलाई 2026
खंड से बन े गोल खलु े िीर्भ िाल ेधातु
के कैन — जिजिजि
20 िुलाई 2026 19 िनिरी 2027
8 आई एस 18800 : 2023 संिोधन संख्या 1
बच्चों को िधू जपलाने के जलए स्ट्टेनलेस िुलाई 2026
स्ट्टील की बोतल — जिजिजि
एस. के. िमा,भ िैज्ञाजनक एफ एि ं उप महाजनिेिक (हॉलमार्किंग)
[जिज्ञापन-III/4/असा./240/2026-27]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 21st July, 2026
Ref: HQ-PUB015/1/2020-PUB-BIS (1576).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments to Indian standards,
particulars of which are given in schedule hereto annexed have been established.
SCHEDULE
Sl. No., Year & Title of the Indian No. and Date of Date till which
No. Standard Month/Year of the Establishment of the the standard
Amendment Amendment without the
amendment as
mentioned in
column 3 shall
remain in force
(1) (2) (3) (4) (5)
1 IS 1281 : 2025 Amendment No. 1 20 July 2026 19 January 2027
Bicycles — Cranks and Chain July 2026
Wheels — Specification
(Fourth Revision)4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
2 IS 3196 (Part 1) : 2013 Amendment No. 5 20 July 2026 19 January 2027
Welded Low Carbon Steel July 2026
Cylinders Exceeding 5 Litres Water
Capacity for Low Pressure
Liquefiable Gases
Part 1 Cylinders for Liquefied
Petroleum Gases (LPG) —
Specification
(Sixth Revision)
3 IS 14407 : 2023 Amendment No. 1 20 July 2026 19 January 2027
Aluminium Cans for July 2026
Beverages — Specification
(First Revision)
4 IS 15841 : 2009 Amendment No. 1 20 July 2026 19 January 2027
ISO 11634 : 1996 July 2026
Snowboard-Boots — Interface with
Ski-Binding
5 IS 16722 : 2018 Amendment No. 2 20 July 2026 19 January 2027
Radio Frequency Identification July 2026
(RFID) System for Automotive
Applications — Specification
6 IS 17891 (Part 3) : 2023 Amendment No. 1 20 July 2026 19 January 2027
ISO 3601-3 : 2005 July 2026
Fluid Power Systems — O-rings
Part 3 Quality Acceptance Criteria
7 IS 18427 : 2024 Amendment No. 1 20 July 2026 19 January 2027
Three Piece Round Open Top July 2026
Metal Cans for Foods and
Beverages — Specification
8 IS 18800 : 2023 Amendment No. 1 20 July 2026 19 January 2027
Stainless Steel Feeding Bottle for July 2026
Infants — Specification
S. K. VERMA, Scientist F & DDG (Hallmarking)
[ADVT.-III/4/Exty./240/2026-27]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.