Date: 2026-06-03Category: Extra OrdinaryState: Union GovernmentCountry: India
In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments to Indian standards,
**Executive Summary**
This notification, issued by the Bureau of Indian Standards (BIS) on June 2, 2026, announces an amendment to the Indian Standard for cycle rubber tubes under the BIS Rules, 2018. Amendment No. 1 to standard IS 2415:2025 was established on June 1, 2026. Stakeholders must note that the previous version of the standard (without the amendment) will remain in force only until November 30, 2026.
**Key Points / Main Content**
**Legal Authority and Notification**
* The notification is issued in pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018.
* The document was published in the Gazette of India on June 3, 2026, by the Department of Consumer Affairs.
**Specific Standard Amendments**
* **Standard Affected:** IS 2415 : 2025, "Cycle — Rubber Tubes (Moulded/Jointed) — Specification (Fifth Revision)."
* **Amendment Details:** Amendment No. 1, dated June 2026.
* **Establishment Date:** The amendment is officially established as of June 1, 2026.
**Transition Period**
* A grace period is provided for compliance.
* The Indian Standard as it existed without Amendment No. 1 will remain valid and in force until November 30, 2026.
**Impact Analysis**
**Manufacturers of Cycle Rubber Tubes**
**Impact**
Manufacturers are subject to updated specifications for moulded and jointed cycle rubber tubes as per Amendment No. 1.
**Action Required**
Producers must transition their manufacturing and quality control processes to comply with the new amendment before the existing version of the standard expires on November 30, 2026.
**Bureau of Indian Standards (BIS) / Regulatory Authorities**
**Impact**
The BIS is responsible for the establishment and notification of these technical changes to ensure industrial quality.
**Action Required**
Regulatory bodies must ensure that certification and enforcement activities align with the updated specifications and observe the transition deadline.
Key Entities Referenced
Bureau of Indian Standards: The national standards body of India responsible for notifying and establishing amendments to Indian standards.
IS 2415 : 2025: The specific Indian Standard for Cycle — Rubber Tubes (Moulded/ Jointed) — Specification which has been amended.
Bureau of Indian Standards Rules, 2018: The statutory rules under which the amendments to Indian standards are established and notified.
Department of Consumer Affairs: The administrative department under which the Bureau of Indian Standards operates and issues these notifications.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-03062026-273117
xxxGIDHxxx
CG-DL-E-03062026-273117
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 380] नई दिल्ली, बुधिार, िनू 3, 2026/ज्य ष्े ठ 13, 1948
No. 380] NEW DELHI, WEDNESDAY, JUNE 3, 2026/JYAISTHA 13, 1948
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल े जिभाग)
अजधसचू ना
नई दिल्ली, 2 िून, 2026
सिं भ:भ HQ-PUB015/1/2020-PUB-BIS (1547).— भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ैइसमें सलं ग्न अनूसूची म ें दिये गय े
मानकों में संिोधन दकये गय ेह|ैं
4001 GI/2026 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, िर् भ सिं ोधनों की सख्ं या एि ं सिं ोधनों की जतजथ िब तक मानक
स.ं जतजथ प्रजतस्ट्थापन जतजथ तीसरे स्ट्तंभ म ेंइंजगत
तथा िीर्कभ
सिं ोधन के जबना भी
लाग ूरहगे ा
(1) (2) (3) (4) (5)
1 आई एस 2415 : 2025 संिोधन संख्या 1 01 िून 2026 30 निम्बर 2026
साइदकल — रबड़ ट्यूब िून 2026
(मोल्डेड/िोड़ िाली) — जिजिजि
(पााँचिां पुनरीक्षण)
जचत्रा गुप्ता, िैज्ञाजनक िी एि ं उप महाजनिेिक (हॉलमार्किंग एि ं रेननंग)
[जिज्ञापन-III/4/असा./149/2026-27]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 2nd June, 2026
Ref: HQ-PUB015/1/2020-PUB-BIS (1547).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments to Indian standards,
particulars of which are given in schedule hereto annexed have been established.
SCHEDULE
Sl. No., Year & Title of the Indian No. and Date of Date till which the
No. Standard Month/Year of the Establishment of standard without
Amendment the Amendment the amendment as
mentioned in
column 3 shall
remain in force
(1) (2) (3) (4) (5)
1 IS 2415 : 2025 Amendment No. 1 01 June 2026 30 November 2026
Cycle — Rubber Tubes (Moulded/ June 2026
Jointed) — Specification
(Fifth Revision)
CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training)
[ADVT.-III/4/Exty./149/2026-27]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.