This notification from the Bureau of Indian Standards (BIS), Department of Consumer Affairs, dated August 26, 2025, announces amendments to several Indian Standards. Published under Ref: HQPUB01512020PUBBIS 1323, these amendments are in pursuance of Subrule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018.
The specific standards affected are:
1. **IS 736:1986:** Amendment No. 2 to the Specification for Wrought Aluminium and Aluminium Alloy Plate for General Engineering Purposes (Third Revision).
2. **IS 2828: 2019:** Amendment No. 1 to ISO 472: 2013, Plastics Vocabulary (Second Revision).
3. **IS 4123: 2024:** Amendment No. 1 to the Chain Pipe Wrenches Specification (Second Revision).
4. **IS 14534: 2023:** Amendment No. 1 to Plastics Recovery and Recycling of Plastics Waste Guidelines (Second Revision).
5. **IS 17021: 2018:** Amendment No. 3 to E 20 Fuel Admixture of Anhydrous Ethanol and Gasoline As Fuel for Spark Ignited Engine Powered Vehicles Specification
All amendments were established on August 21, 2025, and the original standards, without the amendments, will remain in force until February 20, 2026.
The notification was issued by Rachna Sehgal, Scientist G, DDG MSC. Further information can be obtained from the Bureau of Indian Standards.
Key Entities Referenced
Bureau of Indian Standards: A national standards body of India responsible for standardization, marking and quality certification of goods.
Department of Consumer Affairs: A department under the Ministry of Consumer Affairs, Food and Public Distribution of the Government of India.
New Delhi: The capital city of India, where the notification was issued.
Bureau of Indian Standards Rules, 2018: The set of rules governing the operations and procedures of the Bureau of Indian Standards.
IS 736 1986: Indian Standard for Wrought Aluminium and Aluminium Alloy Plate for General Engineering Purposes Third Revision.
IS 2828 : 2019: Indian Standard relating to Plastics Vocabulary Second Revision and references ISO 472 : 2013
IS 4123 : 2024: Indian Standard for Chain Pipe Wrenches Specification Second Revision
IS 17021 : 2018: Indian Standard for E 20 Fuel Admixture of Anhydrous Ethanol and Gasoline As Fuel for Spark Ignited Engine Powered Vehicles Specification
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-01092025-265866
xxxGIDHxxx
CG-DLxx-ExG-I0D1E0x9x2x0 25-265866
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 594] नई दिल्ली, सोमिार, जसतम्ब र 1, 2025/भाद्र 10, 1947
No. 594] NEW DELHI, MONDAY, SEPTEMBER 1, 2025/BHADRA 10, 1947
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेजिभाग)
अजधसचू ना
नई दिल्ली, 26 अगस्ट्त, 2025
सिं भ:भ HQ-PUB015/1/2020-PUB-BIS (1323).— भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ेंभारतीय मानक ब्यरू ो एतिद्वारा अजधसूजचत करता ह ैइसमें सलं ग्न अनूसूची में दिय ेगय ेमानकों
में संिोधन दकय ेगय ेह|ैं
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, सिं ोधनों की सख्ं या सिं ोधनों की जतजथ िब तक मानक
स.ं िर्भ तथा िीर्भक एि ं जतजथ प्रजतस्ट्थापन जतजथ तीसरे स्ट्तंभ में इंजगत
सिं ोधन के जबना भी
लाग ूरहगे ा
(1) (2) (3) (4) (5)
आई एस 736 – 1986
1 सामान्य इंिीजनयररंग प्रयोिनों के जलए संिोधन संख्या 2 21 अगस्ट्त 2025 20 फरिरी 2026
जपटिााँ एल्युमीजनयम और एल्यमु ीजनयम अगस्ट्त 2025
जमश्रधातु प्लेट के जलए जिजिजि
(तीसरा पनु रीक्षण)
5831 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
2 आई एस 2828 : 2019 संिोधन संख्या 1 21 अगस्ट्त 2025 20 फरिरी 2026
आई एस ओ 472 : 2013 अगस्ट्त 2025
प्लाजस्ट्टक — िब्िािली
(िसू रा पनु रीक्षण)
3 आई एस 4123 : 2024 संिोधन संख्या 1 21 अगस्ट्त 2025 20 फरिरी 2026
चेन पाइप ररंच — जिजिजि अगस्ट्त 2025
(िसू रा पनु रीक्षण)
4 आई एस 14534 : 2023 संिोधन संख्या 1 21 अगस्ट्त 2025 20 फरिरी 2026
प्लाजस्ट्टक — प्लाजस्ट्टक कचरे के पुनः अगस्ट्त 2025
प्राजि और पुनः प्रक्रम — दििाजनिेि
(िसू रा पनु रीक्षण)
5 आई एस 17021 : 2018 संिोधन संख्या 3 21 अगस्ट्त 2025 20 फरिरी 2026
ई 20 ईंधन — जनिभल इथने ॉल और अगस्ट्त 2025
गैसोलीन का जमश्रण — स्ट्पाकभ इजग्नटेड
इंिन सचं ाजलत िाहनों के जलए ईंधन के
रूप म ें— जिजिजि
रचना सहगल,िैज्ञाजनक िी एि ंउप महाजनिेिक (एम एस सी)
[जिज्ञापन-III/4/असा./327/2025-26]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 26th August, 2025
Ref: HQ-PUB015/1/2020-PUB-BIS (1323).— In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments to Indian standards,
particulars of which are given in schedule hereto annexed have been established.
SCHEDULE
Sl No., Year & Title of the Indian No. and Month/Year Date of Date till which
No. Standard of the Amendment Establishment of the the standard
Amendment without the
amendment as
mentioned in
column 3 shall
remain in force
(1) (2) (3) (4) (5)
1 IS 736 – 1986 Amendment No. 2 21 August 2025 20 February 2026
Specification for Wrought August 2025
Aluminium and Aluminium Alloy
Plate for General Engineering
Purposes
(Third Revision)
2 IS 2828 : 2019 Amendment No. 1 21 August 2025 20 February 2026
ISO 472 : 2013 August 2025[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
Plastics — Vocabulary
(Second Revision)
3 IS 4123 : 2024 Amendment No. 1 21 August 2025 20 February 2026
Chain Pipe Wrenches — August 2025
Specification
(Second Revision)
4 IS 14534 : 2023 Amendment No. 1 21 August 2025 20 February 2026
Plastics — Recovery and Recycling August 2025
of Plastics Waste — Guidelines
(Second Revision)
5 IS 17021 : 2018 Amendment No. 3 21 August 2025 20 February 2026
E 20 Fuel — Admixture of August 2025
Anhydrous Ethanol and Gasoline —
As Fuel for Spark Ignited Engine
Powered Vehicles — Specification
RACHNA SEHGAL, Scientist G & DDG (MSC)
[ADVT.-III/4/Exty./327/2025-26]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.