**Executive Summary**
This notification issued by the Bureau of Indian Standards (BIS) on April 22, 2026, announces the establishment of twelve new and revised Indian Standards related to civil engineering and river valley projects. These standards were officially established on April 21, 2026, and will coexist with previous versions until they are formally withdrawn on October 21, 2026. The document serves to update technical criteria for dam construction, tunnel design, and measurement methodologies.
**Key Points / Main Content**
* **Establishment and Transition Timelines**
* Twelve specific Indian Standards (IS) were established as of April 21, 2026.
* Previous versions of these standards will remain in force concurrently with the new versions for a six-month transition period.
* The formal withdrawal date for all superseded standards is October 21, 2026.
* **Hydraulic and Dam Infrastructure**
* **IS 4997:2026**: Updated criteria for the design of hydraulic jump-type stilling basins with horizontal and sloping aprons.
* **IS 8605:2026**: Revised code of practice for the construction of masonry in dams.
* **IS 15310:2026**: New guidelines for the hydraulic design of pump sumps and intakes.
* **IS 12633:2026**: Updated guidelines for the first filling and emptying of pressure tunnels.
* **River Valley Project Measurements (IS 9401 Series)**
* **Part 1**: Revised methods for measuring excavation for foundations (Dams and Appurtenant Structures).
* **Part 9**: Updated measurement methods for lining.
* **Part 10**: Updated measurement methods for formwork.
* **Part 12**: Updated requirements for topographical surveys within river valley projects.
* **Structural and Instrumentation Standards**
* **IS 5878 (Part 1):2026**: Revised code of practice for precision surveying and setting out water-conveying tunnels.
* **IS 10334:2026**: Updated standards for the selection, splicing, and installation of cables used for connecting resistance-type measuring devices in dams.
* **IS 10434 (Part 2):2026**: Revised guidelines for the installation and maintenance of vibrating wire type joint meters in concrete and masonry dams.
* **IS 11639 (Part 3):2026**: Updated criteria for the structural design of penstocks, including guidelines for "specials."
**Impact Analysis**
**Stakeholder: Civil Engineering Contractors and Construction Firms**
**Impact**
These entities are affected by changes in measurement methodologies for excavation and formwork, as well as updated codes of practice for tunnel and dam construction.
**Action Required**
Must update internal operational procedures and project management software to reflect the 2026 measurement standards and construction codes before the October transition deadline.
**Stakeholder: Infrastructure Designers and Hydraulic Engineers**
**Impact**
Designers must adhere to revised criteria for penstocks, stilling basins, and pump sumps to ensure compliance with the latest safety and technical requirements.
**Action Required**
Review the new 2026 technical criteria and incorporate these changes into any design blueprints or project specifications initiated after April 21, 2026.
**Stakeholder: Regulatory and Quality Inspection Authorities**
**Impact**
Inspectors must manage a dual-standard environment where both old and new versions are valid until October 2026.
**Action Required**
Update inspection checklists and compliance audits to reference the 2026 standards, ensuring a full transition by the October 21, 2026, withdrawal date.
Key Entities Referenced
Bureau of Indian Standards (BIS): The national standards body of India responsible for the notification, establishment, and withdrawal of Indian Standards.
Bureau of Indian Standards Rules, 2018: The legal framework, specifically Rule 15(1), under which the new standards are established and older versions are withdrawn.
Department of Consumer Affairs: The primary government department under which the Bureau of Indian Standards operates.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-29042026-272148
xxxGIDHxxx
CG-DL-E-29042026-272148
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 295] नई दिल्ली, मगं लिार, अप्रलै 28, 2026/ििै ाख 8, 1948
No. 295] NEW DELHI, TUESDAY, APRIL 28, 2026/VAISAKHA 8, 1948
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल े जिभाग)
अजधसचू ना
नई दिल्ली, 22 अप्रलै , 2026
सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (1526).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण
इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ में दिये गये ह,ैं तीसरे स्ट्तभं में इंजगत जतजि को स्ट्िाजपत हो गये ह|ैं चौिे स्ट्तंभ में दिय े
गय े मानकों के जििरण, यदि कोई हो तो ि े भी साि-साि लाग ू रहगें े िब तक ि े पााँचि ें स्ट्तंभ में इंजगत जतजि को िापस जलए
िाने ह|ैं
3007 GI/2026 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
अनसु चू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस िापस होन ेकी
स.ं जतजि
िर् भतिा िीर्कभ जलए िान ेह,ैं की सख्ं या, िर् भ
तिा िीर्कभ
(1) (2) (3) (4) (5)
1 आई एस 4997 : 2026 21 अप्रलै 2026 आई एस 4997 – 1968 21 अक्टूबर 2026
क्षैजति और ढलानिार एप्रन िाले क्षैजति और ढलानिार एप्रन
हाइड्रोजलक िंप टाइप जस्ट्टललंग बेजसन िाले हाइड्रोजलक िंप टाइप के
का जडजाइन — मानिडं जस्ट्टललंग बेजसन के जडजाइन के
(पहला पुनरीक्षण) जलए मानिडं
2 आई एस 5878 (भाग 1) : 2026 21 अप्रलै 2026 आई एस 5878 (भाग I) – 21 अक्टूबर 2026
िल पहचं ान े िाली सरु ंगों का जनमाभण 1971
भाग 1 सटीक सिेक्षण और स्ट्िापना सुरंगों के जनमाभण के जलए रीजत
— रीजत संजहता संजहता
(पहला पुनरीक्षण) भाग I सटीक सिेक्षण और
स्ट्िापना
3 आई एस 8605 : 2026 21 अप्रलै 2026 आई एस 8605 – 1977 21 अक्टूबर 2026
बांधों में जचनाई का जनमाभण — रीजत बांधों में जचनाई के जनमाणभ के
संजहता जलए
(पहला पुनरीक्षण) रीजत संजहता
आई एस 9401 (भाग 1) : 2026 21 अप्रलै 2026 आई एस 9401 (भाग 1) : 21 अक्टूबर 2026
4
निी घाटी पररयोिनाओं म ेंकायभ 1999
मापन
निी घाटी पररयोिनाओं म ें
की पद्धजत (बााँध और संबंजधत
कायभमापन
संरचनाएाँ)
की पद्धजत (बााँध और सम्बद्ध
भाग 1 नींि उत्खनन
संरचनाएाँ)
(िसू रा पनु रीक्षण)
भाग 1 नींि उतखनन
(पहला पुनरीक्षण)
आई एस 9401 (भाग 9) : 2026 21 अप्रलै 2026 आई एस 9401 (भाग 9) – 21 अक्टूबर 2026
5
निी घाटी पररयोिनाओं म ेंकायभ 1987
मापन की पद्धजत (बााँध और सबं ंजधत निी घाटी पररयोिनाओं म ेंकायभ
संरचनाएाँ) मापन की पद्धजत (बााँध और
भाग 9 लाइलनगं संबंजधत संरचनाए)ाँ
(पहला पुनरीक्षण) भाग 9 लाइलनगं[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
आई एस 9401 (भाग 10) : 2026 21 अप्रलै 2026 आई एस 9401 (भाग 10) : 21 अक्टूबर 2026
6
निी घाटी पररयोिनाओं म ेंकायभ 1990
मापन की पद्धजत (बााँध और सबं ंजधत
निी घाटी पररयोिनाय्यों (बााँध
संरचनाएाँ)
और अनुबध संरचनाएं) म ें
भाग 10 फॉमभिकभ
कायभमापन की पद्धजत
(पहला पुनरीक्षण)
भाग 10 फॉमभिकभ
आई एस 9401 (भाग 12) : 2026 21 अप्रलै 2026 आई एस 9401 (भाग 12) : 21 अक्टूबर 2026
7
निी घाटी पररयोिनाओं म ेंकायभ 1992
मापन की पद्धजत (बााँध और सबं ंजधत
निी घाटी पररयोिनाओं म ेंकायभ
संरचनाएाँ)
मापन की पद्धजतयां (बांध और
भाग 12 स्ट्िलाकृजतक सिेक्षण सम्बद्ध संरचनाएं)
(पहला पुनरीक्षण) भाग 12 स्ट्िलाकृजतक सिेक्षण
8 आई एस 10334 : 2026 21 अप्रलै 2026 आई एस 10334 – 1982 21 अक्टूबर 2026
कंक्रीट और जचनाई िाल ेबांधों में कंक्रीट और जचनाई िाल ेबांधों में
प्रजतरोध-प्रकार के मापन उपकरणों प्रजतरोध-प्रकार के मापन
को िोड़ने के जलए प्रयुक्त केबलों के उपकरणों को िोड़ने के जलए
चयन, स्ट््लाइलसंग, स्ट्िापना और खलु े प्रयुक्त केबलों के चयन,
जसरों को सुरक्षा प्रिान करना — स्ट््लाइलसंग, स्ट्िापना और खुल े
रीजत संजहता
जसरों को सुरक्षा प्रिान करने के
(पहला पुनरीक्षण)
जलए रीजत संजहता
9 आई एस 10434 (भाग 2) : 2026 21 अप्रलै 2026 आई एस 10434 (भाग 2) : 21 अक्टूबर 2026
कंक्रीट और जचनाई िाल ेबांधों में 1996
जिरूपण मापन युजक्तयों के संस्ट्िापन,
कंक्रीट और जचनाई िाल ेबााँधों में
रख-रखाि और
जिरूपण मापन युजक्तयों के
प्रेक्षण — दििाजनििे
संस्ट्िापन, रख-रखाि और
भाग 2 कम्पन तार दकस्ट्म के सयं ुक्त प्रेक्षण की मागभिर्िभका
मीटर भाग 2 कम्पन तार दकस्ट्म के
(पहला पुनरीक्षण)
संयुक्त मीटर
10 आई एस 11639 (भाग 3) : 2026 21 अप्रलै 2026 आई एस 11639 (भाग 3) : 21 अक्टूबर 2026
पेनस्ट्टॉक का संरचनात्मक जडजाइन 1996
करने के जलए मानिंड — दििाजनिेि पातनल की संरचनात्मक
भाग 3 पेनस्ट्टॉक्स के जलए जििेर् जडजाइन की कसौटी
(पहला पुनरीक्षण) भाग 3 पातनल के जलये जििेर्4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
11 आई एस 12633 : 2026 21 अप्रलै 2026 आई एस 12633 : 1989 21 अक्टूबर 2026
िाब सुरंग ेभरना और खाली करना िाब सुरंग ेभरन ेऔर खाली करने
— दििाजनिेि (पहला पुनरीक्षण) सबधी — मागिभ िी जसद्धान्त
12 आई एस 15310 : 2026 21 अप्रलै 2026 आई एस 15310 : 2003 21 अक्टूबर 2026
पम्प हौिी और अन्तर्ग्ाभही का पंप की हौिी और अन्तगाभही मुख
द्रिचाजलत जडजाइन — दििाजनिेि का िलीय जडिाइन — मागभििी
(पहला पुनरीक्षण) जसद्धान्त
जनिात सुल्ताना हक़, िैज्ञाजनक िी एि ं उप महाजनिेिक (हॉलमार्किंग एि ं रेलनंग)
[जिज्ञापन-III/4/असा./64/2026-27]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 22nd April, 2026
Ref: HQ-PUB013/1/2020-PUB-BIS (1526).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which
are given in the second column of the schedule hereto annexed have been established on the date indicated against it in
third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force
concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be Withdrawal
Withdrawn, if any
(1) (2) (3) (4) (5)
1 IS 4997 : 2026 21 April 2026 IS 4997 – 1968 21 October 2026
Design of Hydraulic Jump Type Criteria for Design of Hydraulic
Stilling Basins with Horizontal Jump Type Stilling Basins with
and Sloping Apron — Criteria Horizontal and Sloping Apron
(First Revision)
2 IS 5878 (Part 1) : 2026 21 April 2026 IS 5878 (Part I) – 1971 21 October 2026
Construction of Tunnels Code of Practice for
Conveying Water Construction of Tunnels
Part 1 Precision Survey and Part I Precision Survey and
Setting Out — Code of Practice Setting Out
(First Revision)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
3 IS 8605 : 2026 21 April 2026 IS 8605 – 1977 21 October 2026
Construction of Masonry in Dams Code of Practice for
— Code of Practice Construction of Masonry in
(First Revision) Dams
4 IS 9401 (Part 1) : 2026 21 April 2026 IS 9401 (Part 1) : 1999 21 October 2026
Method of Measurement of Works Method of Measurement of
in River Valley Projects Works in River Valley Projects
(Dams and Appurtenant (Dams and Appurtenant
Structures) Structures)
Part 1 Excavation for Foundation Part 1 Excavation for
(Second Revision) Foundation
(First Revision)
5 IS 9401 (Part 9) : 2026 21 April 2026 IS 9401 (Part 9) – 1987 21 October 2026
Method of Measurement of Works Method of Measurement of
in River Valley Projects Works in River Valley Projects
(Dams and Appurtenant (Dams and Appurtenant
Structures) Structures)
Part 9 Lining Part 9 Lining
(First Revision)
6 IS 9401 (Part 10) : 2026 21 April 2026 IS 9401 (Part 10) : 1990 21 October 2026
Method of Measurement of Works Method of Measurement of
in River Valley Projects (Dams Works in River Valley Projects
and Appurtenant Structures) (Dams and Appurtenant
Part 10 Formwork Structures)
(First Revision) Part 10 Formwork
7 IS 9401 (Part 12) : 2026 21 April 2026 IS 9401 (Part 12) : 1992 21 October 2026
Methods of Measurement of Work Method of Measurement of
in River Valley Projects (Dams Works in River Valley Projects
and Appurtenant Structures) (Dams and Appurtenant
Part 12 Topographical Surveys Structures)
(First Revision) Part 12 Topographical Surveys
8 IS 10334 : 2026 21 April 2026 IS 10334 – 1982 21 October 2026
Selection, Splicing, Installation Code of Practice for
and Providing Protection to the Selection, Splicing, Installation
Open ends of Cables Used for and Providing Protection to the
Connecting the Resistance Type Open ends of Cables Used for
Measuring Devices in Concrete Connecting Resistance Type
and Masonry Dams — Code of Measuring Devices in Concrete
Practice and Masonry Dams
(First Revision)
9 IS 10434 (Part 2) : 2026 21 April 2026 IS 10434 (Part 2) : 1996 21 October 2026
Installation, Maintenance and Guidelines for Installation,
Observation of Deformation Maintenance and Observation
Measuring Devices in Concrete of Deformation Measuring
and Masonry Dams — Guidelines Devices in Concrete and
Part 2 Vibrating Wire Type Joint Masonry Dams
Meter Part 2 Vibrating Wire Type
(First Revision) Jointmeter
10 IS 11639 (Part 3) : 2026 21 April 2026 IS 11639 (Part 3) : 1996 21 October 2026
Criteria for Structural Design of Structural Design of Penstock
Penstock — Guidelines — Criteria
Part 3 Specials for Penstocks Part 3 Specials for Penstocks
(First Revision)6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
11 IS 12633 : 2026 21 April 2026 IS 12633 : 1989 21 October 2026
First Filling and Emptying of First Filling and Emptying of
Pressure Tunnels — Guidelines Pressure Tunnels — Guidelines
(First Revision)
12 IS 15310 : 2026 21 April 2026 IS 15310 : 2003 21 October 2026
Hydraulic Design of Pump Sumps Hydraulic Design of Pump
and Intakes — Guidelines Sumps and Intakes —
(First Revision) Guidelines
NISHAT SULTANA HAQUE, Scientist G & DDG (Hallmarking and Training)
[ADVT.-III/4/Exty./64/2026-27]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.