Executive Summary:
This document, issued by the Bureau of Indian Standards, notifies the establishment of several Indian Standards, as per Rule 15 of the Bureau of Indian Standards Rules, 2018. The standards listed have been established on July 8, 2025. Select standards will concurrently remain in force until withdrawn on January 8, 2026.
Key Points / Main Content:
* **Establishment of Indian Standards:**
* Several new and revised Indian Standards have been established on July 8, 2025.
* **Concurrent Standards and Withdrawal Dates:**
* Certain existing standards will remain in force concurrently with the new/revised standards.
* These concurrent standards will be withdrawn on January 8, 2026.
* **Specific Standards Details:**
* **IS 101 Part 2 Sec 2: 2025:** Methods of Sampling and Test for Paints, Varnishes and Related Products Part 2 Test on Liquid Paints Chemical Examination Section 2 Determination of Non Volatile Matter Content Third Revision ISO 3251 : 2019, MOD Fourth Revision; IS 101 Part 2Sec 2 1986.
* **IS 101 Part 3 Sec 2: 2025:** Methods of Sampling and Test for Paints, Varnishes and Related Products Part 3 Tests on Paint Film Formation Section 2 Determination of Film Thickness Third Revision ISO 2808 : 2019; IS 101 Part 3Sec 2 : 1989.
* **IS 2717: 2025:** Vitreous Enamelware and CeramicMetal Systems Glossary Second Revision; IS 2717 1979.
* **IS 5829: 2025:** Uterine Sound Specification Second Revision; IS 5829 1982.
* **IS 5849: 2025:** Anterior Vaginal Wall Retractor, Sims Pattern Specification First Revision; IS 5849 1970.
* **IS 6111: 2025:** Suction Type Uterine Curette Specification First Revision; IS 6111 1971.
* **IS 7691: 2025:** Frequencies for Special Power Applications IEC 60196 : 2009, MOD First Revision; IS 7691 1975.
* **IS 12271: 2025:** Laproscopic Trocar and Cannula Specification First Revision; IS 12271 1988.
* **IS 16242 Part 3: 2025:** Uninterruptible Power Systems UPS Part 3 Method of Specifying the Performance and Test Requirements First Revision IEC 620403 : 2021; IS 16242 Part 3 : 2014 IEC 620403 : 2011.
* **IS 18003 Part 4Sec 1 : 2025:** Unified Data Exchange Part 4 Compliance Specification Section 1 Catalogue Service.
* **IS 19231 : 2025:** Ayurveda Glossary of Terms Standardized Terminology for Preventive and Promotive Health.
* **IS 19257 : 2025:** Metal Air Flow Batteries Specification.
* **IS 19313 : 2025:** Software and Systems Engineering DevOps Principles and Practices.
Impact Analysis:
* **Manufacturers and Producers:**
* *Impact:* Must adhere to the newly established and revised Indian Standards in their production processes and product specifications.
* *Action Required:* Review and update manufacturing processes and product designs to comply with the new standards; ensure products meet the specified requirements by July 8, 2025. Discontinue use of withdrawn standards by January 8, 2026.
* **Testing and Certification Bodies:**
* *Impact:* Need to update their testing and certification procedures to align with the new and revised standards.
* *Action Required:* Incorporate the new standards into testing protocols, update certification schemes, and train personnel on the updated requirements.
* **Consumers:**
* *Impact:* Benefit from products that meet updated safety and quality benchmarks as defined by the new standards.
* *Action Required:* Be aware of the updated standards and look for products that are certified to meet these standards.
* **Bureau of Indian Standards (BIS):**
* *Impact:* Responsible for implementing and monitoring compliance with the new standards.
* *Action Required:* Disseminate information about the new standards, conduct audits and inspections to ensure compliance, and address any inquiries or concerns from stakeholders.
Key Entities Referenced
Bureau of Indian Standards: A standards organization in India that establishes Indian Standards.
Department of Consumer Affairs: The government department responsible for consumer protection and standardization.
New Delhi: The location where the notification was issued, New Delhi, Delhi
Bureau of Indian Standards Rules, 2018: The set of rules under which the Bureau of Indian Standards operates.
Indian Standards: The standards established and notified by the Bureau of Indian Standards.
ISO 3251 : 2019: An international standard, ISO 3251:2019, is referenced in the context of methods of sampling and test for paints, varnishes and related products
IS 101: Indian Standard IS 101 relates to methods of sampling and test for paints, varnishes and related products
IEC 60196 : 2009: International Electrotechnical Commission standard related to frequencies for special power applications
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-17072025-264740
xxxGIDHxxx
CG-DL-E-17072025-264740
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 502] नई दिल्ली, सोमिार, िलु ाई 14, 2025/आर्ाढ़ 23, 1947
No. 502] NEW DELHI, MONDAY, JULY 14, 2025/ASHADHA 23, 1947
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेजिभाग)
अजधसचू ना
नई दिल्ली 8 िलु ाई, 2025
सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (1285)—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण में भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ैकी जिन भारतीय मानकों के जििरण
इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ म ें दिये गये ह,ैं तीसरे स्ट्तंभ में इंजगत जतजि को स्ट्िाजपत हो गये ह|ैं चौि े स्ट्तंभ म ें
दिये गय े मानकों के जििरण, यदि कोई हो तो ि े भी साि-साि लाग ू रहगें े िब तक ि े पााँचिें स्ट्तंभ में इंजगत जतजि को
िापस जलए िाने ह।ैं
क्रम स्ट्िाजपत भारतीय मानकों की संख्या, िर्भ तिा प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस जलए िाने िापस होने की
स.ं िीर्भक हैं, की संख्या, िर्भ तिा िीर्भक जतजि
(1) (2) (3) (4) (5)
1
आई एस 101 (भाग 2/अनुभाग 2) : 2025 08 िुलाई 2025 आई एस 101 (भाग 2/अनुभाग 2) – 08 िनिरी 2026
1986
रंग रोगन, िार्नभि और संबंजधत उत्पािों के
नमूनाकरण और परीक्षण पद्धजतयााँ रंग रोगन, िार्नभि और संबंजधत उत्पािों
4680 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
भाग 2 तरल रंग रोगन पर परीक्षण (रसायन के नमूनाकरण और परीक्षण पद्धजतयााँ
परीक्षण) अनुभाग 2 गैर-िाष्पिील पिािभ
भाग 2 तरल रंग रोगन पर परीक्षण
मात्रा का जनधाभरण
(रसायन परीक्षण)
(ISO 3251 : 2019, संिोजधत)
अनुभाग 2 िाष्पिील पिािभ
(चौिा पुनरीक्षण)
(तीसरा पुनरीक्षण)
2
आई एस 101 (भाग 3/अनुभाग 2) : 2025 08 िुलाई 2025 आई एस 101 (भाग 3/अनुभाग 2) : 08 िनिरी 2026
1989
आई एस ओ 2808 : 2019
रंग रोगन, िार्नभि और संबंजधत उत्पािों
रंग रोगन, िार्नभि और संबंजधत उत्पािों के
के नमूनाकरण और परीक्षण पद्धजतयााँ
नमूनाकरण और परीक्षण पद्धजतयााँ
भाग 3 रंग रोगन के जनर्मभत दिल्म पर
भाग 3 रंग रोगन के जनर्मभत दिल्म पर परीक्षण
परीक्षण अनुभाग 2 दिल्म की मोटाई
अनुभाग 2 दिल्म की मोटाई का जनधारभ ण
(तीसरा पुनरीक्षण)
(चौिा पुनरीक्षण)
3
आई एस 2717 : 2025 08 िुलाई 2025 आई एस 2717 – 1979 08 िनिरी 2026
जिट्ररयस एनामेलिेयर और जसरेजमक-धातु जिट्ररयस एनामेलिेयर और जसरेजमक-धातु
प्रणाली — िब्िािली प्रणाली से सम्बंजधत पाट्ररभाजर्क
िब्िािली
(िसू रा पुनरीक्षण)
(पहला पुनरीक्षण)
4
आई एस 5829 : 2025 08 िुलाई 2025 आई एस 5829 – 1982 08 िनिरी 2026
गभाभिय साउंड — जिजिजि साउंड, गभाभिय के जलए जिजिजि
(िसू रा पुनरीक्षण) (पहला पुनरीक्षण)
5
आई एस 5849 : 2025 08 िुलाई 2025 आई एस 5849 – 1970 08 िनिरी 2026
जसम्स पैटनभ का एंटट्ररयार योजनक आड़ रीरेक्टर रीरेक्टर, एंटट्ररयार योजनक आड़ (जसम्स
— जिजिजि पैटनभ) के जलए जिजिजि
(पहला पुनरीक्षण)
6
आई एस 6111 : 2025 08 िुलाई 2025 आई एस 6111 – 1971 08 िनिरी 2026
सक्िन प्रकार का गभाभिय क्यूरेट — जिजिजि क्यूरेट, गभाभिय (सक्िन प्रकार) के जलए
जिजिजि
(पहला पुनरीक्षण)
7
आई एस 7691 : 2025 08 िुलाई 2025 आई एस 7691 – 1975 08 िनिरी 2026
जििेर् जिद्युत अनुप्रयोगों के जलए आिृजियााँ जििेर् जिद्युत अनुप्रयोगों के जलए
आिृजियााँ
(IEC 60196 : 2009, संिोजधत)
(पहला पुनरीक्षण)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
8
आई एस 12271 : 2025 08 िुलाई 2025 आई एस 12271 – 1988 08 िनिरी 2026
लैप्रोस्ट्कोजपक रोकर और कैनुला — जिजिजि लैप्रोस्ट्कोजपक रोकर और कैनुला के जलए
जिजिजि
(पहला पुनरीक्षण)
9
आई एस 16242 (भाग 3) : 2025 08 िुलाई 2025 आई एस 16242 (भाग 3) : 2014 08 िनिरी 2026
आई ई सी 62040-3 : 2021 आई ई सी 62040-3 : 2011
अबाजधत पॉिर प्रणाजलयााँ (यूपीएस) अबाजधत पॉिर प्रणाजलयॉ (यूपीएस)
भाग 3 कायभकाट्ररता एिं परीक्षण अपेक्षाएाँ भाग 3 कायभकाट्ररता एिं परीक्षण अपेक्षाएाँ
जनर्िभि करने की पद्धजत जनर्िभि करने की पद्धजत
(पहला पुनरीक्षण)
10
आई एस 18003 (भाग 4/अनुभाग 1) : 2025 08 िुलाई 2025 लाग ूनहीं लाग ूनहीं
एकीकृत डाटा एक्सचिें
भाग 4 अनुपालन जिजिजि
अनुभाग 1 कैटलॉग सेिा
11
आई एस 19231 : 2025 08 िुलाई 2025 लाग ूनहीं लाग ूनहीं
आयुिेि — पाट्ररभाजर्क िब्िािली स्ट्िस्ट्ििृि
के जलए मानकीकृत िब्िािली
12
आई एस 19257 पी : 2025 08 िुलाई 2025 लाग ूनहीं लाग ूनहीं
धातु िायु प्रिाह बैटट्ररयााँ — जिजिजि
13
आई एस 19313 : 2025 08 िुलाई 2025 लाग ूनहीं लाग ूनहीं
सॉफ्टिेयर और जसस्ट्टम इंिीजनयररंग —
जडिऑप्स — जसद्धांत एिं व्यिहार
चित्रा गुप्ता, वैज्ञाचिक जी एवं उप महाचिदेशक (हॉलमाचकिंग एवं ट्रेचिंग)
[जिज्ञापन-III/4/असा./235/2025-26]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 8th July, 2025
Ref: HQ-PUB013/1/2020-PUB-BIS (1285)—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
SCHEDULE
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Indian Date of
No. Standards Established Standards to be Withdrawn, if Withdrawal
Establishment
any
(1) (2) (3) (4) (5)
08 July 2025 08 January 2026
1 IS 101 (Part 2/Sec 2) : 2025 IS 101 (Part 2/Sec 2) – 1986
Methods of Sampling and Test for Methods of Sampling and Test
Paints, Varnishes and Related Products for Paints, Varnishes and Related
Products
Part 2 Test on Liquid Paints (Chemical
Examination) Part 2 Test on Liquid Paints
(Chemical Examination)
Section 2 Determination of Non-
Volatile Matter Content Section 2 Volatile Matter (Third
Revision)
(ISO 3251 : 2019, MOD)
(Fourth Revision)
08 July 2025 08 January 2026
2 IS 101 (Part 3/Sec 2) : 2025 IS 101 (Part 3/Sec 2) : 1989
ISO 2808 : 2019 Methods of Sampling and Test
for Paints, Varnishes and Related
Methods of Sampling and Test for
Products
Paints, Varnishes and Related Products
Part 3 Tests on Paint Film
Part 3 Tests on Paint Film Formation
Formation
Section 2 Determination of Film
Section 2 Film Thickness
Thickness
(Third Revision)
(Fourth Revision)
08 July 2025 08 January 2026
3 IS 2717 : 2025 IS 2717 – 1979
Vitreous Enamelware and Ceramic- Glossary of Terms Relating to
Metal Systems — Glossary Vitreous Enamelware and
Ceramic-Metal Systems
(Second Revision)
(First Revision)
08 July 2025 08 January 2026
4 IS 5829 : 2025 IS 5829 – 1982
Uterine Sound — Specification (Second Specification for Sound, Uterine
Revision)
(First Revision)
08 July 2025 08 January 2026
5 IS 5849 : 2025 IS 5849 – 1970
Anterior Vaginal Wall Retractor, Sim’s Specification for Retractor,
Pattern — Specification Anterior Vaginal Wall (Sim’s
Pattern)
(First Revision)
08 July 2025 08 January 2026
6 IS 6111 : 2025 IS 6111 – 1971
Suction Type Uterine Curette — Specification for Curette, Uterine
Specification (Suction Type)
(First Revision)
08 July 2025 08 January 2026
7 IS 7691 : 2025 IS 7691 – 1975[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
Frequencies for Special Power Frequencies for Special Power
Applications Applications
(IEC 60196 : 2009, MOD)
(First Revision)
08 July 2025 08 January 2026
8 IS 12271 : 2025 IS 12271 – 1988
Laproscopic Trocar and Cannula — Specification for Laproscopic
Specification Trocar and Cannula
(First Revision)
08 July 2025 08 January 2026
9 IS 16242 (Part 3) : 2025 IS 16242 (Part 3) : 2014
IEC 62040-3 : 2021 IEC 62040-3 : 2011
Uninterruptible Power Systems (UPS) Uninterruptible Power Systems
Part 3 Method of Specifying the (UPS)
Performance and Test Requirements
Part 3 Method of Specifying the
(First Revision) Performance and Test
Requirements
08 July 2025 NA
10 IS 18003 (Part 4/Sec 1) : 2025 NA
Unified Data Exchange
Part 4 Compliance Specification
Section 1 Catalogue Service
08 July 2025 NA
11 IS 19231 : 2025 NA
Ayurveda — Glossary of Terms
Standardized Terminology for
Preventive and Promotive Health
08 July 2025 NA
12 IS 19257 P : 2025 NA
Metal Air Flow Batteries —
Specification
08 July 2025 NA
13 IS 19313 : 2025 NA
Software and Systems Engineering —
DevOps — Principles and Practices
CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training)
[ADVT.-III/4/Exty./235/2025-26]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.