Okay, I'm ready to generate the policy analysis report.
**Report: Analysis of Amendments to Quality Control Orders for Chemicals and Petrochemicals**
**1. Executive Summary:**
This report analyzes a series of amendments to existing Quality Control Orders (QCOs) concerning various chemicals and petrochemicals, including Acrylonitrile Butadiene Styrene (ABS), Ethylene Dichloride, Polycarbonate, Vinyl Chloride Monomer, pXylene, and Polyurethanes. The amendments, issued by the Ministry of Chemicals and Fertilizers, Department of Chemicals and Petrochemicals, primarily focus on revising the enforcement date of the original Quality Control Orders, pushing it back to March 12th or 19th, 2023. The key finding is a uniform postponement of the implementation of these QCOs, potentially providing industry with additional time to comply with the mandated standards.
**2. Introduction:**
This report aims to provide a concise overview of recent amendments to Quality Control Orders (QCOs) in the chemicals and petrochemicals sector, as published in the Gazette of India on September 2nd, 2022. The analysis is based solely on the provided official text of the amendments.
**3. Policy Overview:**
These documents represent amendments to the following original policies:
* Acrylonitrile Butadiene Styrene ABS Quality Control Order, 2021
* Ethylene Dichloride Quality Control Order, 2021
* Polycarbonate Quality Control Order, 2021
* Vinyl Chloride Monomer Quality Control Order, 2021
* pXylene Quality Control Order, 2021
* Polyurethanes Quality Control Order, 2021
The core objective of each amendment is to modify the date on which the respective Quality Control Order comes into force.
**4. Background and Rationale:**
The rationale for these amendments appears to be a need to adjust the original implementation timelines of the QCOs. The amendments specifically address the commencement date outlined in the original orders, suggesting that the initial deadlines were deemed impractical or required adjustment due to unforeseen circumstances. The consistent postponement across multiple QCOs indicates a potentially systemic issue affecting the industry's ability to meet the initial compliance targets.
**5. Key Provisions / Changes:**
The primary change introduced by each amendment is the substitution of the original commencement date with a new date.
* **Acrylonitrile Butadiene Styrene ABS Quality Control Third Amendment Order, 2022:** Changes the commencement date from the original date to **March 12, 2023.** This is the *third* amendment.
* **Ethylene Dichloride Quality Control Second Amendment Order, 2022:** Changes the commencement date from the original date to **March 12, 2023.**
* **Polycarbonate Quality Control Second Amendment Order, 2022:** Changes the commencement date from the original date to **March 12, 2023.**
* **Vinyl Chloride Monomer Quality Control Third Amendment Order, 2022:** Changes the commencement date from the original date to **March 12, 2023.** This is the *third* amendment.
* **pXylene Quality Control Second Amendment Order, 2022:** Changes the commencement date from the original date to **March 19, 2023.**
* **Polyurethanes Quality Control Third Amendment Order, 2022:** Changes the commencement date from the original date to **March 19, 2023.** This is the *third* amendment.
In each case, paragraph 1, subparagraph 2 of the original QCO is being amended. The effect of these changes is to delay the enforcement of the mandatory quality standards for these chemicals.
**6. Target Audience and Stakeholders:**
The primary target audience and stakeholders affected by these amendments are manufacturers, importers, and distributors of Acrylonitrile Butadiene Styrene (ABS), Ethylene Dichloride, Polycarbonate, Vinyl Chloride Monomer, pXylene, and Polyurethanes within India. These entities are directly impacted by the implementation of quality control standards for these products.
**7. Implementation Aspects (Inferred):**
* **Responsible Agency:** The Ministry of Chemicals and Fertilizers, specifically the Department of Chemicals and Petrochemicals, is the responsible agency for issuing and overseeing the implementation of these amendments. The Bureau of Indian Standards (BIS) is consulted in the process, as mandated by the Bureau of Indian Standards Act, 2016.
* **Timelines:** The key timeline element is the revised commencement date of March 12th, or 19th, 2023, for the respective QCOs. This provides affected stakeholders with a new deadline for achieving compliance.
* The implementation requires publication in the official Gazette.
**8. Expected Outcomes / Impact of Changes:**
The likely intended outcome of these changes is to provide the affected industry with additional time to prepare for and comply with the quality control standards mandated by the original QCOs. This postponement may allow companies to invest in necessary upgrades, testing facilities, or process adjustments to meet the required standards. The impact will be a delayed enforcement of stricter quality controls.
**9. Conclusion:**
The amendments to the Quality Control Orders for Acrylonitrile Butadiene Styrene (ABS), Ethylene Dichloride, Polycarbonate, Vinyl Chloride Monomer, pXylene, and Polyurethanes, issued on September 2nd, 2022, represent a uniform postponement of the original implementation dates to March 2023. This adjustment is significant as it impacts manufacturers, importers, and distributors, providing them with a revised timeline for compliance with the mandated quality standards and potentially preventing disruption of supply. It suggests a possible need for more realistic compliance deadlines within the chemical and petrochemicals sector.
Key Entities Referenced
Bureau of Indian Standards Act, 2016: A law that empowers the Central Government to consult with the Bureau of Indian Standards and issue quality control orders.
Bureau of Indian Standards: An organization that the Central Government consults with before issuing quality control orders.
Acrylonitrile Butadiene Styrene ABS Quality Control Order, 2021: A quality control order that is being amended by this notification. Specifically, this notification is the 'Acrylonitrile Butadiene Styrene ABS Quality Control Third Amendment Order, 2022'
Ethylene Dichloride Quality Control Order, 2021: A quality control order that is being amended by this notification. Specifically, this notification is the 'Ethylene Dichloride Quality Control Second Amendment Order, 2022'.
Polycarbonate Quality Control Order, 2021: A quality control order that is being amended by this notification. Specifically, this notification is the 'Polycarbonate Quality Control Second Amendment Order, 2022'.
Vinyl Chloride Monomer Quality Control Order, 2021: A quality control order that is being amended by this notification. Specifically, this notification is the 'Vinyl Chloride Monomer Quality Control Third Amendment Order, 2022'.
pXylene Quality Control Order, 2021: A quality control order that is being amended by this notification. Specifically, this notification is the 'pXylene Quality Control Second Amendment Order, 2022'.
Polyurethanes Quality Control Order, 2021: A quality control order that is being amended by this notification. Specifically, this notification is the 'Polyurethanes Quality Control Third Amendment Order, 2022'.
Ministry of Chemicals and Fertilizers: The government ministry responsible for the Department of Chemicals and Petrochemicals.
Department of Chemicals and Petrochemicals: A department within the Ministry of Chemicals and Fertilizers.
New Delhi: Location where the order was issued. It is also implied to be the location of the Ministry of Chemicals and Fertilizers
SUSANTA KUMAR PUROHIT: The Joint Secretary who signed the order.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-02092022-238572
xxxGIDHxxx
CG-DL-E-02092022-238572
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग II—खण् ड 3—उप-खण्ड (ii)
PART II—Section 3—Sub-section (ii)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 3960] नई ददल्ली, िुिर्ार, जसतम्ब र 2, 2022/भार 11, 1944
No. 3960] NEW DELHI, FRIDAY, SEPTEMBER 2, 2022/BHADRA 11, 1944
रसायन और उर्रव क मत्रं ालय
(रसायन एर् ंपरे ोरसायन जर्भाग)
आदेि
नई ददल्ली, 2 जसतम्ब र, 2022
का.आ. 4136(अ).— केन्द्रीय सरकार की, भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 16
के साथ पठित धारा 25 की उप-धारा (3) द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यूरो से परामिव के
पश्चात यह राय ह ै दक, लोकजहत में ऐसा करना आर्श्यक या समीचीन ह,ै एदिलोजनराइल - ब्यूटाडीन स्ट्टाइरीन
(एबीएस) (गुणर्त्ता जनयंत्रण) आदेि, 2021 का संिोधन करने के जलए जनम्नजलजखत आदेि करती ह,ै अथावत:्-
1. संजिप्त नाम, प्रारंभ और लाग ू होना - (1) इस आदेि का संजिप्त नाम एदिलोजनराइल - ब्यूटाडीन स्ट्टाइरीन
(एबीएस) (गुणर्त्ता जनयंत्रण) तृतीय संिोधन आदेि, 2022 ह।ै
(2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा।
2. एदिलोजनराइल – ब्यूटाडीन स्ट्टाइरीन (एबीएस) (गणु र्त्ता जनयंत्रण) आदेि, 2021 म,ें पैरा 1 में, उप-पैरा (2) के
स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथावत:् -
"(2) यह 12 माच,व 2023, को प्रर्ृत्त होगा।"
[फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-2]
सुिांत कुमार परु ोजहत, संयक्ु त सजचर्
5923 GI/2022 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
ठटप्पण : मूल आदेि का.आ. संख्या 3927 (अ), तारीख 13 जसतंबर, 2021 को भारत के रािपत्र, असाधारण, भाग-II,
खंड 3, उप-खंड (ii) में प्रकाजित दकया गया था और तत्पश्चात का.आ. संख्या 88 (अ), तारीख 7 िनर्री, 2022
और का.आ. संख्या 1069 (अ), तारीख 10 माचव, 2022 द्वारा संिोजधत दकया गया।
MINISTRY OF CHEMICALS AND FERTILIZERS
(Department of Chemicals and Petrochemicals)
ORDER
New Delhi, the 2nd September, 2022
S.O. 4136(E).—In exercise of the powers conferred by section 16 read with sub-section (3) of
section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after
consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the
public interest, hereby makes the following Order further to amend the Acrylonitrile- Butadiene Styrene
(ABS) (Quality Control) Order, 2021, namely:—
1. Short title and commencement. – (1) This Order may be called the Acrylonitrile- Butadiene Styrene
(ABS) (Quality Control) Third Amendment Order, 2022.
(2) It shall come into force on the date of its publication in the official Gazette.
2. In the Acrylonitrile- Butadiene Styrene (ABS) (Quality Control) Order, 2021, in paragraph 1, for sub-
paragraph (2), the following sub-paragraph shall be substituted, namely:—
“(2) It shall come into force on the 12th day of March, 2023.”
[F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 2]
SUSANTA KUMAR PUROHIT, Jt. Secy.
Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-
Section (ii), vide number S.O. 3927(E), dated the 13th September, 2021 and subsequently amended
vide numbers S.O. 88(E), dated the 7th January, 2022 and 1069(E), dated the 10th March, 2022.
आदेि
नई ददल्ली, 2 जसतम्ब र, 2022
का.आ. 4137(अ).—केन्द्रीय सरकार की, भारतीय मानक ब्यरू ो अजधजनयम, 2016 (2016 का 11) की धारा 16
के साथ पठित धारा 25 की उप-धारा (3) द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यूरो से परामिव के
पश्चात यह राय ह ै दक, लोकजहत में ऐसा करना आर्श्यक या समीचीन है, एजथलीन डाइक्लोराइड (गुणर्त्ता जनयंत्रण)
आदेि, 2021 का संिोधन करने के जलए जनम्नजलजखत आदेि करती ह,ै अथावत:्-
1. संजिप्त नाम, प्रारंभ और लागू होना - (1) इस आदेि का संजिप्त नाम एजथलीन डाइक्लोराइड (गुणर्त्ता जनयंत्रण)
जद्वतीय संिोधन आदेि, 2022 ह।ै
(2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा।
2. एजथलीन डाइक्लोराइड (गणु र्त्ता जनयंत्रण) आदिे , 2021 में, पैरा 1 म,ें उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत
उप-पैरा रखा िाएगा, अथावत:् -
"(2) यह 12 माच,व 2023, को प्रर्ृत्त होगा।"
[फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-2]
सुिांत कुमार परु ोजहत, संयक्ु त सजचर्
ठटप्पण : मूल आदेि का.आ. संख्या 3928 (अ), तारीख 13 जसतंबर, 2021 को भारत के रािपत्र, असाधारण, भाग-II,
खंड 3, उप-खंड (ii) में प्रकाजित दकया गया था और तत्पश्चात का.आ. संख्या 1070 (अ), तारीख 10 माच,व
2022 द्वारा संिोजधत दकया गया।[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 3
ORDER
New Delhi, the 2nd September, 2022
S.O. 4137(E).—In exercise of the powers conferred by section 16 read with sub-section (3) of
section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after
consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the
public interest, hereby makes the following Order further to amend the Ethylene Dichloride (Quality
Control) Order, 2021, namely:—
1. Short title and commencement. – (1) This Order may be called the Ethylene Dichloride (Quality Control)
Second Amendment Order, 2022.
(2) It shall come into force on the date of its publication in the official Gazette.
2. In the Ethylene Dichloride (Quality Control) Order, 2021, in paragraph 1, for sub-paragraph (2), the
following sub-paragraph shall be substituted, namely:—
“(2) It shall come into force on the 12th day of March, 2023.”
[F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 2]
SUSANTA KUMAR PUROHIT, Jt. Secy.
Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-
Section (ii), vide number S.O. 3928(E), dated the 13th September, 2021 and subsequently amended
vide number S.O. 1070(E), dated the 10th March, 2022.
आदेि
नई ददल्ली, 2 जसतम्ब र, 2022
का.आ. 4138(अ).—केन्द्रीय सरकार की, भारतीय मानक ब्यरू ो अजधजनयम, 2016 (2016 का 11) की धारा 16
के साथ पठित धारा 25 की उप-धारा (3) द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यूरो से परामिव के
पश्चात यह राय ह ै दक, लोकजहत म ें ऐसा करना आर्श्यक या समीचीन है, पॉलीकाबोनेट (गणु र्त्ता जनयंत्रण) आदेि, 2021
का संिोधन करने के जलए जनम्नजलजखत आदेि करती ह,ै अथावत:्-
1. संजिप्त नाम, प्रारंभ और लागू होना - (1) इस आदेि का सजं िप्त नाम पॉलीकाबोनेट (गणु र्त्ता जनयंत्रण) जद्वतीय संिोधन
आदेि, 2022 ह।ै
(2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा।
2. पॉलीकाबोनेट (गणु र्त्ता जनयंत्रण) आदिे , 2021 म,ें पैरा 1 म,ें उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा
िाएगा, अथावत:् -
"(2) यह 12 माच,व 2023, को प्रर्ृत्त होगा।"
[फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-2]
सुिांत कुमार परु ोजहत, संयक्ु त सजचर्
ठटप्पण: मूल आदेि का.आ. संख्या 3930 (अ), तारीख 13 जसतंबर, 2021 को भारत के रािपत्र, असाधारण, भाग-II,
खंड 3, उप-खंड (ii) में प्रकाजित दकया गया था और तत्पश्चात का.आ. संख्या 1071 (अ), तारीख 10 माच,व
2022 द्वारा संिोजधत दकया गया।4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
ORDER
New Delhi, the 2nd September, 2022
S.O. 4138(E).—In exercise of the powers conferred by section 16 read with sub-section (3) of
section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after
consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the
public interest, hereby makes the following Order further to amend the Polycarbonate (Quality Control)
Order, 2021, namely:—
1. Short title and commencement. – (1) This Order may be called the Polycarbonate (Quality Control)
Second Amendment Order, 2022.
(2) It shall come into force on the date of its publication in the official Gazette.
2. In the Polycarbonate (Quality Control) Order, 2021, in paragraph 1, for sub-paragraph (2), the following
sub-paragraph shall be substituted, namely:—
“(2) It shall come into force on the 12th day of March, 2023.”
[F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 2]
SUSANTA KUMAR PUROHIT, Jt. Secy.
Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-
Section (ii), vide number S.O. 3930(E), dated the 13th September, 2021 and subsequently amended
vide number S.O. 1071(E), dated the 10th March, 2022.
आदेि
नई ददल्ली, 2 जसतम्ब र, 2022
का.आ. 4139(अ).—केन्द्रीय सरकार की, भारतीय मानक ब्यरू ो अजधजनयम, 2016 (2016 का 11) की धारा 16
के साथ पठित धारा 25 की उप-धारा (3) द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यूरो से परामिव के
पश्चात यह राय ह ै दक, लोकजहत में ऐसा करना आर्श्यक या समीचीन है, जर्नाइल क्लोराइड मोनोमर (गुणर्त्ता जनयंत्रण)
आदेि, 2021 में संिोधन करन े के जलए जनम्नजलजखत आदेि करती ह,ै अथावत:्-
1. संजिप्त नाम, प्रारंभ और लाग ू होना - (1) इस आदिे का संजिप्त नाम जर्नाइल क्लोराइड मोनोमर (गणु र्त्ता जनयंत्रण)
तृतीय संिोधन आदेि, 2022 ह।ै
(2) यह रािपत्र में उसके प्रकािन की तारीख को प्रर्ृत्त होगा।
2. जर्नाइल क्लोराइड मोनोमर (गणु र्त्ता जनयंत्रण) आदिे , 2021 में, पैरा 1 म,ें उप-पैरा (2) के जलए, जनम्नजलजखत उप-
पैरा रखा िाएगा, अथावत्: -
"(2) यह 19 माच,व 2023, को प्रर्ृत्त होगा।"
[फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-2]
सुिांत कुमार परु ोजहत, संयक्ु त सजचर्
ठटप्पण : मूल आदेि का.आ. संख्या 3932 (अ), तारीख 13 जसतंबर, 2021 को भारत के रािपत्र, असाधारण, भाग-II,
खंड 3, उप-खंड (ii) में प्रकाजित दकया गया था और तत्पश्चात का.आ. संख्या 862 (अ), तारीख 25 फरर्री,
2022 और का.आ. संख्या 1072 (अ), तारीख 10 माच,व 2022 द्वारा संिोजधत दकया गया।[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 5
ORDER
New Delhi, the 2nd September, 2022
S.O. 4139(E).—In exercise of the powers conferred by section 16 read with sub-section (3) of
section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after
consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the
public interest, hereby makes the following Order further to amend the Vinyl Chloride Monomer (Quality
Control) Order, 2021, namely:—
1. Short title and commencement. – (1) This Order may be called the Vinyl Chloride Monomer (Quality
Control) Third Amendment Order, 2022.
(2) It shall come into force on the date of its publication in the official Gazette.
2. In the Vinyl Chloride Monomer (Quality Control) Order, 2021, in paragraph 1, for sub-paragraph (2), the
following sub-paragraph shall be substituted, namely:—
“(2) It shall come into force on the 12th day of March, 2023.”
[F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 2]
SUSANTA KUMAR PUROHIT, Jt. Secy.
Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-
Section (ii), vide number S.O. 3932(E), dated the 13th September, 2021 and subsequently amended
vide number S.O. 862(E), dated the 25th February, 2022 and S.O. 1072(E), dated the 10th March,
2022.
आदेि
नई ददल्ली, 2 जसतम्ब र, 2022
का.आ. 4140(अ).—केन्द्रीय सरकार की, भारतीय मानक ब्यरू ो अजधजनयम, 2016 (2016 का 11) की धारा 16
के साथ पठित धारा 25 की उप-धारा (3) द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यूरो से परामिव के
पश्चात यह राय ह ै दक, लोकजहत में ऐसा करना आर्श्यक या समीचीन है, पी-िाइलीन (गुणर्त्ता जनयंत्रण) आदेि, 2021
का संिोधन करने के जलए जनम्नजलजखत आदेि करती ह,ै अथावत:्-
1. संजिप्त नाम, प्रारंभ और लाग ू होना - (1) इस आदेि का संजिप्त नाम पी-िाइलीन (गणु र्त्ता जनयंत्रण) जद्वतीय
संिोधन आदेि, 2022 ह।ै
(2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा।
2. पी-िाइलीन (गुणर्त्ता जनयंत्रण) आदिे , 2021 म,ें पैरा 1 म,ें उप-पैरा (2) के जलए, जनम्नजलजखत उप-पैरा रखा
िाएगा, अथावत:् -
"(2) यह 19 माच,व 2023, को प्रर्ृत्त होगा।"
[फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-2]
सुिांत कुमार परु ोजहत, संयक्ु त सजचर्
ठटप्पण : मलू आदेि का.आ. संख्या 3929 (अ), तारीख 13 जसतंबर, 2021 को भारत के रािपत्र, असाधारण, भाग-II,
खंड 3, उप-खंड (ii) में प्रकाजित दकया गया था और तत्पश्चात का.आ. संख्या 1276 (अ), तारीख 23 माच,व
2022 द्वारा संिोजधत दकया गया।6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
ORDER
New Delhi, the 2nd September, 2022
S.O. 4140(E).—In exercise of the powers conferred by section 16 read with sub-section (3) of
section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after
consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the
public interest, hereby makes the following Order further to amend the p-Xylene (Quality Control) Order,
2021, namely:—
1. Short title and commencement. – (1) This Order may be called the p-Xylene (Quality Control) Second
Amendment Order, 2022.
(2) It shall come into force on the date of its publication in the official Gazette.
2. In the p-Xylene (Quality Control) Order, 2021, in paragraph 1, for sub-paragraph (2), the following sub-
paragraph shall be substituted, namely:—
“(2) It shall come into force on the 19th day of March, 2023.”
[F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 2]
SUSANTA KUMAR PUROHIT, Jt. Secy.
Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-
Section (ii), vide number S.O. 3929(E), dated the 13th September, 2021 and subsequently amended
vide number S.O. 1276(E), dated the 23rd March, 2022.
आदेि
नई ददल्ली, 2 जसतम्ब र, 2022
का.आ. 4141(अ).—केन्द्रीय सरकार की, भारतीय मानक ब्यरू ो अजधजनयम, 2016 (2016 का 11) की धारा 16
के साथ पठित धारा 25 की उप-धारा (3) द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यूरो से परामिव के
पश्चात यह राय ह ै दक, लोकजहत में ऐसा करना आर्श्यक या समीचीन है, पॉलीयुरेथने ेस (गुणर्त्ता जनयंत्रण) आदेि,
2021 में संिोधन करने के जलए जनम्नजलजखत आदेि करती ह,ै अथावत:्-
1. संजिप्त नाम, प्रारंभ और लाग ू होना - (1) इस आदेि का संजिप्त नाम पॉलीयुरेथने ेस (गुणर्त्ता जनयंत्रण) ततृ ीय
संिोधन आदेि, 2022 ह।ै
(2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा।
2. पॉलीयुरेथने ेस (गुणर्त्ता जनयंत्रण) आदेि, 2021 म,ें पैरा 1 में, उप-पैरा (2) के जलए, जनम्नजलजखत उप-पैरा रखा
िाएगा, अथावत:् -
"(2) यह 19 माच,व 2023, को प्रर्ृत्त होगा।"
[फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-II]
सुिांत कुमार परु ोजहत, संयक्ु त सजचर्
ठटप्पण: मूल आदेि का.आ. संख्या 3931 (अ), तारीख 13 जसतंबर, 2021 को भारत के रािपत्र, असाधारण, भाग-II,
खंड 3, उप-खंड (ii) में प्रकाजित दकया गया था और तत्पश्चात का.आ. संख्या 89 (अ), तारीख 7 िनर्री, 2022
और का.आ. संख्या 1277 (अ), तारीख 23 माचव, 2022 द्वारा संिोजधत दकया गया।[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 7
ORDER
New Delhi, the 2nd September, 2022
S.O. 4141(E).—In exercise of the powers conferred by section 16 read with sub-section (3) of
section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after
consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the
public interest, hereby makes the following Order further to amend the Polyurethanes (Quality Control)
Order, 2021, namely:—
1. Short title and commencement. – (1) This Order may be called the Polyurethanes (Quality Control) Third
Amendment Order, 2022.
(2) It shall come into force on the date of its publication in the official Gazette.
2. In the Polyurethanes (Quality Control) Order, 2021, in paragraph 1, for sub-paragraph (2), the following
sub-paragraph shall be substituted, namely:—
“(2) It shall come into force on the 19th day of March, 2023.”
[F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 2]
SUSANTA KUMAR PUROHIT, Jt. Secy.
Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-
Section (ii), vide number S.O. 3931(E), dated the 13th September, 2021 and subsequently amended
vide number S.O. 89(E), dated the 7th January, 2022 and S.O. 1277(E), dated the 23rd March, 2022.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.