Home India Ministry of Chemicals and Fertilizers Quality Control Order for twelve (12) QCOs...
Date: 2022-09-30 Category: Extra Ordinary State: Union Government Country: India

Quality Control Order for twelve (12) QCOs

Issued by Ministry of Chemicals and Fertilizers · Department of Chemicals and Petro Chemicals

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

Okay, I will generate the report as requested, focusing on the information contained within the provided government policy text and adapting the structure based on whether the document describes new policies or amendments to existing ones. **Report on Quality Control Amendment Orders in the Chemicals and Petrochemicals Sector** **1. Executive Summary:** This report summarizes a series of amendment orders pertaining to Quality Control Orders (QCOs) in the chemicals and petrochemicals sector, specifically concerning Ethylene Vinyl Acetate Copolymers, Maleic Anhydride, Styrene Vinyl Benzene, Acrylonitrile, Polyethylene Material for Moulding and Extrusion, Linear Alkyl Benzene, Polyester Continuous Filament Fully Drawn Yarn, Polyester Partially Oriented Yarns, Polyester Staple Fibres, Polyester Industrial Yarn, 100 Percent Polyester Spun Grey and White Yarn and Synthetic MicroFibres for use in Cement Based Matrix. The core purpose of these amendments is to revise the date of enforcement for these QCOs, generally pushing it back to April 3rd or April 24th, 2023, and to clarify that the latest versions of Indian Standards, including amendments, will apply. The key finding is that the original implementation dates have been deferred, providing affected industries with additional time to comply with the specified quality standards. **2. Introduction:** This report aims to provide an informative overview of recent amendments to Quality Control Orders in the chemicals and petrochemicals sector. The analysis is based solely on the provided government policy text, focusing on the purpose, key changes, and implications of these amendments. This report serves to inform affected industries of the changes. **3. Policy Overview:** * These documents represent amendments to existing Quality Control Orders (QCOs) for the listed chemicals and petrochemicals. * **Core Objective(s):** The objective, as inferred from the text, is to ensure quality control and standardization of the specified chemicals and petrochemicals manufactured, imported, or sold in India. This is achieved by mandating compliance with relevant Indian Standards set by the Bureau of Indian Standards (BIS). A key objective of the amendments is to provide additional time for industry to comply with the initial QCOs and to ensure adherence to the most current versions of the relevant Indian Standards. **4. Background and Rationale:** The original Quality Control Orders were likely introduced to improve the quality and reliability of chemicals and petrochemicals in the Indian market, protecting consumers and ensuring fair competition. The amendments provided in this document seem designed to address potential challenges in implementing the original QCOs by the initial deadlines, most likely due to factors such as the time required for industries to adapt their production processes and obtain necessary certifications. The amendments also serve to clarify that the most up-to-date versions of the Indian Standards will be applicable, ensuring that the QCOs remain aligned with the latest industry best practices. **5. Key Provisions / Changes:** Each amendment order follows a similar structure, making the following changes to the respective original QCO: * **Change 1: Revised Commencement Date:** The original commencement date specified in paragraph 1, subparagraph 2 of each QCO is changed. For Ethylene Vinyl Acetate Copolymers, Polyethylene Material for Moulding and Extrusion, Linear Alkyl Benzene, Polyester Continuous Filament Fully Drawn Yarn, Polyester Partially Oriented Yarns, Polyester Staple Fibres, Polyester Industrial Yarn, 100 Percent Polyester Spun Grey and White Yarn and Synthetic MicroFibres for use in Cement Based Matrix the new date is *April 3rd, 2023*. For Maleic Anhydride, Styrene Vinyl Benzene, and Acrylonitrile, the new date is *April 24th, 2023*. * **Effect:** This provides manufacturers, importers, and sellers of these products with additional time to comply with the requirements of the original QCOs. * **Change 2: Clarification on Applicable Standards:** A note is added after the TABLE in each QCO clarifying that the "latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification." * **Effect:** This ensures that the most current versions of the relevant Indian Standards are applied, including any amendments issued by BIS. It removes any ambiguity regarding which version of the standard is applicable. * **Change 3: Revised table:** For Polyester Continuous Filament Fully Drawn Yarn, Polyester Partially Oriented Yarns, Polyester Staple Fibres, Polyester Industrial Yarn, 100 Percent Polyester Spun Grey and White Yarn and Synthetic MicroFibres for use in Cement Based Matrix, the table has been updated to reflect the updated Indian Standard: IS 17261:2022, IS 17262:2022, IS 17263:2022, IS 17264:2022, IS 17265:2022 and IS 16481:2022 respectively. * **Effect:** It ensures that these goods or articles are up to date with the latest standards. **6. Target Audience and Stakeholders:** The direct target audience and stakeholders are: * Manufacturers of Ethylene Vinyl Acetate Copolymers, Maleic Anhydride, Styrene Vinyl Benzene, Acrylonitrile, Polyethylene Material for Moulding and Extrusion, Linear Alkyl Benzene, Polyester Continuous Filament Fully Drawn Yarn, Polyester Partially Oriented Yarns, Polyester Staple Fibres, Polyester Industrial Yarn, 100 Percent Polyester Spun Grey and White Yarn and Synthetic MicroFibres for use in Cement Based Matrix. * Importers of these chemicals and materials. * Sellers and distributors of these chemicals and materials. * The Bureau of Indian Standards (BIS). **7. Implementation Aspects (Inferred):** * **Responsible agency:** The Department of Chemicals and Petrochemicals, under the Ministry of Chemicals and Fertilizers, is responsible for issuing and overseeing these amendments. The Bureau of Indian Standards (BIS) is responsible for setting and updating the Indian Standards. * **Timelines:** The amended QCOs will come into force on either April 3rd or April 24th, 2023, depending on the specific chemical or material. * **Procedures:** Affected industries must ensure that their products comply with the latest versions of the relevant Indian Standards, including obtaining necessary certifications from BIS. **8. Expected Outcomes / Impact of Changes:** The likely intended outcomes of these amendments are: * A smoother transition to compliance with the original Quality Control Orders. * Improved quality and standardization of chemicals and petrochemicals in the Indian market. * Ensuring that industry adheres to the most current Indian Standards. * Reduced risk of non-compliance due to outdated standards. **9. Conclusion:** The amendments to the Quality Control Orders for specified chemicals and petrochemicals represent a significant development for industries operating in this sector. By delaying the implementation date and clarifying the applicability of the latest Indian Standards, the government aims to facilitate a more effective and efficient transition to a higher standard of quality control. Affected industries should carefully review these amendments and take necessary steps to ensure compliance by the revised deadlines.

Key Entities Referenced

Bureau of Indian Standards Act, 2016: An act of the Indian Parliament which empowers the Bureau of Indian Standards. Section 16 of this act is used as the basis for the orders. Bureau of Indian Standards: An Indian Standards body consulted by the Central Government in making the orders related to quality control. Ethylene Vinyl Acetate Copolymers Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. Ethylene Vinyl Acetate Copolymers Quality Control Amendment Order, 2022: An order amending the Ethylene Vinyl Acetate Copolymers Quality Control Order, 2022. Maleic Anhydride Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. Maleic Anhydride Quality Control Amendment Order, 2022: An order amending the Maleic Anhydride Quality Control Order, 2022. Styrene Vinyl Benzene Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. Styrene Vinyl Benzene Quality Control Amendment Order, 2022: An order amending the Styrene Vinyl Benzene Quality Control Order, 2022. Acrylonitrile Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. Acrylonitrile Quality Control Amendment Order, 2022: An order amending the Acrylonitrile Quality Control Order, 2022. Polyethylene Material for Moulding and Extrusion Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. Polyethylene Material for Moulding and Extrusion Quality Control Amendment Order, 2022: An order amending the Polyethylene Material for Moulding and Extrusion Quality Control Order, 2022. Linear Alkyl Benzene Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. Linear Alkyl Benzene Quality Control Amendment Order, 2022: An order amending the Linear Alkyl Benzene Quality Control Order, 2022. Polyester Continuous Filament Fully Drawn Yarn Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. It also specifies Indian Standard IS 17261:2022 Polyester Continuous Filament Fully Drawn Yarn Quality Control Amendment Order, 2022: An order amending the Polyester Continuous Filament Fully Drawn Yarn Quality Control Order, 2022. IS 17261:2022: Indian Standard Title for TextilePolyester Continuous Filament Fully Drawn Yarns FDY Drawn Yarns Specification Polyester Partially Oriented Yarns Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. It also specifies Indian Standard IS 17262:2022 Polyester Partially Oriented Yarns Quality Control Amendment Order, 2022: An order amending the Polyester Partially Oriented Yarns Quality Control Order, 2022. IS 17262:2022: Indian Standard Title for Textile Polyester Partially Oriented Yarns POY POY Specification Polyester Staple Fibres Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. It also specifies Indian Standard IS 17263:2022 Polyester Staple Fibres Quality Control Amendment Order, 2022: An order amending the Polyester Staple Fibres Quality Control Order, 2022. IS 17263:2022: Indian Standard Title for Textile Polyester Staple Fibres Specification Polyester Industrial Yarn Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. It also specifies Indian Standard IS 17264:2022 Polyester Industrial Yarn Quality Control Amendment Order, 2022: An order amending the Polyester Industrial Yarn Quality Control Order, 2022. IS 17264:2022: Indian Standard Title for Textile Polyester Industrial Yarn Specification 100 Percent Polyester Spun Grey and White Yarn Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. It also specifies Indian Standard IS 17265:2022 100 Percent Polyester Spun Grey and White Yarn Quality Control Amendment Order, 2022: An order amending the 100 Percent Polyester Spun Grey and White Yarn Quality Control Order, 2022. IS 17265:2022: Indian Standard Title for Textile 100 Percent Polyester Spun Grey and White Yarn PSY Specification Synthetic MicroFibres for use in Cement Based Matrix Quality Control Order, 2022: A quality control order amended by this notification, with the amendment delaying the enforcement date. It also specifies Indian Standard IS 16481:2022 Synthetic MicroFibres for use in Cement Based Matrix Quality Control Amendment Order, 2022: An order amending the Synthetic MicroFibres for use in Cement Based Matrix Quality Control Order, 2022. IS 16481:2022: Indian Standard Title for Textile Synthetic MicroFibres for use in Cement Based Matrix Specification Central Government: The governing authority responsible for issuing the orders and consulting with the Bureau of Indian Standards. SUSANTA KUMAR PUROHIT: Jt. Secy. (Joint Secretary) - likely in the Department of Chemicals and Petrochemicals, Ministry of Chemicals and Fertilizers. Ministry of Chemicals and Fertilizers: The Indian government ministry under which the Department of Chemicals and Petrochemicals falls. Department of Chemicals and Petrochemicals: A department within the Ministry of Chemicals and Fertilizers responsible for these orders. New Delhi: The location from which the orders were issued. New Delhi, Delhi
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 xxxGIDHxxx सी.जी.-डी.एलxx.x-GअID.-E0x3xx1 02022-239305 CG-DL-E-03102022-239305 असाधारण EXTRAORDINARY भाग II—खण् ड 3—उप-खण्ड (ii) PART II—Section 3—Sub-section (ii) प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 4400] नई ददल्ली, िुक्रर्ार, जसतम्ब र 30, 2022/आजश्र् न 8, 1944 No. 4400] NEW DELHI, FRIDAY, SEPTEMBER 30, 2022/ASVINA 8, 1944 रसायन और उर्रव क मत्रं ालय (रसायन एर् ंपरे ोरसायन जर्भाग) आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4597 (अ).—केन्द्रीय सरकार, भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करत े हुए, भारतीय मानक ब्यरू ो से परामि व के पश्चात , की यह राय ह ैदक, लोकजहत म ें ऐसा करना आर्श्यक या समीचीन ह,ै एजथलीन जर्नाइल एसीटेट कोपॉलीमसव (गणु र्त्ता जनयंत्रण) आदेि, 2022 का संिोधन करने के जलए जनम्नजलजखत आदिे करती ह,ै अथावत्:- 1. संजिप्त नाम, प्रारंभ और लाग ू होना - (1) इस आदेि का संजिप्त नाम एजथलीन जर्नाइल एसीटेट कोपॉलीमस व (गणु र्त्ता जनयंत्रण), संिोधन आदेि, 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. एजथलीन जर्नाइल एसीटेट कोपॉलीमसव (गणु र्त्ता जनयंत्रण) आदेि, 2022 (जिसे इसमें इसके पश्चात उि आदेि कहा गया ह)ै के, पैरा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथावत:् - "(2) यह 3 अप्रैल, 2023, को प्रर्ृत्त होगा।" 3. उि आदेि म,ें सारणी के बाद, जनम्नजलजखत िट्पण अन्द्त:स्ट्थाजपत दकया िाएगा, अथावत:्- 6561 GI/2022 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] “िट्पण : सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यूरो द्वारा िारी दकए गए ऐसे संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यूरो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण : मूल आदेि भारत के रािपत्र, असाधारण, भाग II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1643 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । MINISTRY OF CHEMICALS AND FERTILIZERS (Department of Chemicals and Petrochemicals) ORDER New Delhi, the 29th September, 2022 S.O. 4597 (E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the Ethylene Vinyl Acetate Copolymers (Quality Control) Order, 2022, namely:— 1. Short title and commencement. – (1) This order may be called the Ethylene Vinyl Acetate Copolymers (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette. 2. In the Ethylene Vinyl Acetate Copolymers (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub-paragraph shall be substituted, namely:— ―(2) It shall come into force on the 3rd day of April, 2023.‖ 3. In the said Order, after the TABLE, the following Note shall be inserted, namely:— ―Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022 vide number S.O. 1643(E), dated the 5th April, 2022. आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4598 (अ).—केन्द्रीय सरकार, भारतीय मानक ब्यरू ो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करत े हुए, भारतीय मानक ब्यरू ो से परामि व के पश्चात , की यह राय ह ैदक, लोकजहत म ें ऐसा करना आर्श्यक या समीचीन ह,ै मालेइक एनहाइड्राइड (गुणर्त्ता जनयंत्रण) आदिे , 2022 का संिोधन करन े के जलए जनम्नजलजखत आदिे करती ह,ै अथावत्:-[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 3 1. संजिप्त नाम, प्रारंभ और लाग ू होना- )1( इस आदेि का संजिप्त नाम मालेइक एनहाइड्राइड (गुणर्त्ता जनयंत्रण), संिोधन आदेि, 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. मालेइक एनहाइड्राइड (गणु र्त्ता जनयंत्रण), 2022 (जिसे इसमें इसके पश्चात उि आदेि कहा गया ह)ै के, पैरा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथावत:् - "(2) यह 24 अप्रैल, 2023, को प्रर्ृत्त होगा।" 3. उि आदेि म,ें सारणी के बाद, जनम्नजलजखत िट्पण अन्द्त:स्ट्थाजपत दकया िाएगा, अथावत-् : “िट्पण: सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यूरो द्वारा िारी दकए गए ऐसे संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यूरो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण: मूल आदिे भारत के रािपत्र, असाधारण, भाग II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1644 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । ORDER New Delhi, the 29th September, 2022 S.O. 4598 (E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the Maleic Anhydride (Quality Control) Order, 2022, namely:— 1. Short title and commencement. – (1) This order may be called the Maleic Anhydride (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette. 2. In the Maleic Anhydride (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub-paragraph shall be substituted, namely:— ―(2) It shall come into force on the 24th day of April, 2023.‖ 3. In the said Order, after the TABLE, the following Note shall be inserted, namely:— ―Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022 vide number 1644(E), dated the 5th April, 2022.4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4599 (अ).—केन्द्रीय सरकार, भारतीय मानक ब्यरू ो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यूरो से परामि व के पश्चात , की यह राय ह ै दक, लोकजहत में ऐसा करना आर्श्यक या समीचीन ह,ै स्ट्टाइरीन(जर्नाइल बेंिीन) (गणु र्त्ता जनयंत्रण) आदेि, 2022 का संिोधन करन े के जलए जनम्नजलजखत आदिे करती ह,ै अथावत्:- 1. संजिप्त नाम, प्रारंभ और लाग ू होना- )1( इस आदेि का संजिप्त नाम स्ट्टाइरीन (जर्नाइल बेंिीन) (गुणर्त्ता जनयंत्रण), संिोधन आदेि, 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. स्ट्टाइरीन (जर्नाइल बेंिीन) (गणु र्त्ता जनयंत्रण) आदेि, 2022 (जिसे इसमें इसके पश्चात उि आदेि कहा गया ह)ै के, पैरा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथावत्:- "(2) यह 24 अप्रैल, 2023, को प्रर्ृत्त होगा।" 3. उि आदेि म,ें सारणी के बाद, जनम्नजलजखत िट्पण अन्द्त:स्ट्थाजपत दकया िाएगा, अथावत-् : “िट्पण: सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यूरो द्वारा िारी दकए गए ऐसे संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यरू ो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण : मूल आदेि भारत के रािपत्र, असाधारण, भाग II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1645 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । ORDER New Delhi, the 29th September, 2022 S.O. 4599 (E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the Styrene (Vinyl Benzene) (Quality Control) Order, 2022 , namely:— 1. Short title and commencement. – (1) This order may be called the Styrene (Vinyl Benzene) (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette. 2. In the Styrene (Vinyl Benzene) (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub-paragraph shall be substituted, namely:— ―(2) It shall come into force on the 24th day of April, 2023.‖ 3. In the said Order, after the TABLE, the following Note shall be inserted, namely:— ―Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022 vide number S.O. 1645(E), dated the 5th April, 2022.[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 5 आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4600 (अ).—केन्द्रीय सरकार, भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यूरो से परामिव के पश्चात ,की यह राय ह ै दक, लोकजहत में ऐसा करना आर्श्यक या समीचीन ह,ै एदक्रलोजनराइल (गणु र्त्ता जनयंत्रण) आदेि, 2022 का संिोधन करने के जलए जनम्नजलजखत आदिे करती ह,ै अथावत्:- 1. संजिप्त नाम, प्रारंभ और लाग ू होना– )1( इस आदेि का संजिप्त नाम एदक्रलोजनराइल (गुणर्त्ता जनयंत्रण), संिोधन आदेि, 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. एदक्रलोजनराइल (गुणर्त्ता जनयत्रं ण) आदेि, 2022 (जिसे इसमें इसके पश्चात उि आदेि कहा गया ह)ै के, पैरा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथातव ्: - "(2) यह 24 अप्रैल, 2023, को प्रर्ृत्त होगा।" 3. उि आदेि म,ें सारणी के बाद, जनम्नजलजखत िट्पण अन्द्त:स्ट्थाजपत दकया िाएगा, अथावत-् : “िट्पण : सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यरू ो द्वारा िारी दकए गए ऐस े संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यूरो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण : मूल आदेि भारत के रािपत्र, असाधारण, भाग II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1646 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । ORDER New Delhi, the 29th September, 2022 S.O. 4600 (E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the Acrylonitrile (Quality Control) Order, 2022 , namely:— 1. Short title and commencement. – (1) This order may be called the Acrylonitrile (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette. 2. In the Acrylonitrile (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub-paragraph shall be substituted, namely:— ―(2) It shall come into force on the 24th day of April, 2023.‖ 3. In the said Order, after the TABLE, the following Note shall be inserted, namely:— ―Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022 vide number S.O. 1646(E), dated the 5th April, 2022.6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4601 (अ).— केन्द्रीय सरकार, भारतीय मानक ब्यरू ो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यूरो स े परामि व के पश्चात, की यह राय ह ै दक, लोकजहत म ें ऐसा करना आर्श्यक या समीचीन ह,ै मोल्ल्डग और एक्सट्रूज़न के जलए पॉजलएथीलीन सामग्री (गुणर्त्ता जनयंत्रण) आदेि, 2022 का संिोधन करने के जलए जनम्नजलजखत आदेि करती ह,ै अथावत-् : 1. संजिप्त नाम, प्रारंभ और लाग ू होना- (1) इस आदेि का संजिप्त नाम मोल्ल्डग और एक्सट्रूज़न के जलए पॉजलएथीलीन सामग्री (गुणर्त्ता जनयंत्रण), संिोधन आदेि, 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. मोल्ल्डग और एक्सट्रूज़न के जलए पॉजलएथीलीन सामग्री (गुणर्त्ता जनयंत्रण) आदेि, 2022 (जिसे इसमें इसके पश्चात उि आदेि कहा गया ह)ै के, पैरा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथावत-् : "(2) यह 3 अप्रैल, 2023, को प्रर्ृत्त होगा।" 2. उि आदिे म,ें सारणी के बाद, जनम्नजलजखत िट्पण अन्द्त:स्ट्थाजपत दकया िाएगा, अथावत-् : “िट्पण: सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यूरो द्वारा िारी दकए गए ऐसे संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यूरो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण : मूल आदेि भारत के रािपत्र, असाधारण, भाग II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1647 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । ORDER New Delhi, the 29th September, 2022 S.O. 4601 (E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the Polyethylene Material for Moulding and Extrusion (Quality Control) Order, 2022, namely:— 1. Short title and commencement. – (1) This order may be called the Polyethylene Material for Moulding and Extrusion (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette. 2. In the Polyethylene Material for Moulding and Extrusion (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub- paragraph shall be substituted, namely:— ―(2) It shall come into force on the 3rd day of April, 2023.‖ 3. In the said Order, after the TABLE, the following Note shall be inserted, namely:— ―Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022 vide number S.O. 1647(E), dated the 5th April, 2022.[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 7 आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4602 (अ).—केन्द्रीय सरकार, भारतीय मानक ब्यरू ो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यूरो से परामिव के पश्चात , की यह राय ह ै दक, लोकजहत म ें ऐसा करना आर्श्यक या समीचीन ह,ै लीजनयर अल्काइल बिें ीन (गुणर्त्ता जनयंत्रण) आदेि, 2022 का संिोधन करन े के जलए जनम्नजलजखत आदिे करती ह,ै अथावत्:- 1. संजिप्त नाम, प्रारंभ और लाग ू होना- (1) इस आदेि का संजिप्त नाम लीजनयर अल्काइल बेंिीन (गुणर्त्ता जनयंत्रण), संिोधन आदेि, 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. लीजनयर अल्काइल बेंिीन (गुणर्त्ता जनयंत्रण) आदेि, 2022 (जिसे इसमें इसके पश्चात उि आदेि कहा गया ह)ै के, पैरा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथावत्:- "(2) यह 3 अप्रलै , 2023, को प्रर्ृत्त होगा।" 3. उि आदेि म,ें सारणी के बाद, जनम्नजलजखत िट्पण अन्द्त:स्ट्थाजपत दकया िाएगा, अथावत-् : “िट्पण: सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यूरो द्वारा िारी दकए गए ऐसे संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यरू ो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण : मूल आदेि भारत के रािपत्र, असाधारण, भाग II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1648 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । ORDER New Delhi, the 29th September, 2022 S.O. 4602 (E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the Linear Alkyl Benzene (Quality Control) Order, 2022, namely:— 1. Short title and commencement. – (1) This order may be called the Linear Alkyl Benzene (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette. 2. In the Linear Alkyl Benzene (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub-paragraph shall be substituted, namely:— ―(2) It shall come into force on the 3rd day of April, 2023.‖ 3. In the said Order, after the TABLE, the following Note shall be inserted, namely:— ―Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022, vide number S.O. 1648(E), dated the 5th April, 2022.8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4603 (अ).—केन्द्रीय सरकार, भारतीय मानक ब्यरू ो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करत े हुए, भारतीय मानक ब्यरू ो से परामि व के पश्चात , की यह राय ह ैदक, लोकजहत म ें ऐसा करना आर्श्यक या समीचीन ह,ै पॉजलएस्ट्टर कांटीजनयुि दफलामेंट फुल्ली ड्रॉन यानव (गणु र्त्ता जनयंत्रण) आदेि, 2022 का संिोधन करने के जलए जनम्नजलजखत आदिे करती ह,ै अथावत:्- 1. संजिप्त नाम, प्रारंभ और लाग ू होना- )1( इस आदेि का संजिप्त नाम पॉजलएस्ट्टर कांटीजनयुि दफलामेंट फुल्ली ड्रॉन यानव (गुणर्त्ता जनयंत्रण), संिोधन आदेि, 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. पॉजलएस्ट्टर कांटीजनयुि दफलामेंट फुल्ली ड्रॉन यानव (गुणर्त्ता जनयंत्रण) आदेि, 2022 (जिसे इसमें इसके पश्चात उि आदेि कहा गया ह)ै के, परै ा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथातव ्: - "(2) यह 3 अप्रैल, 2023, को प्रर्ृत्त होगा।" 3. उि आदेि म,ें पैरा 4 के पश्चात सारणी के स्ट्थान पर जनम्नजलजखत सारणी रखी िाएगी, अथातव ्:- “सारणी माल या र्स्ट्तएु ं भारतीय मानक भारतीय मानक के जलए नाम (1) (2) (3) पॉजलएस्ट्टर कांटीजनयुि दफलामटें आईएस 17261:2022 टेक्सटाइल- पॉजलएस्ट्टर काटं ीजनयुि फुल्ली ड्रॉन यान व (एफ डी र्ाई) दफलामेंट फुल्ली ड्रॉन यान व - जर्जनदेि िट्पण : सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यूरो द्वारा िारी दकए गए ऐसे संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यूरो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण : मूल आदेि भारत के रािपत्र, असाधारण, भाग II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1649 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । ORDER New Delhi, the 29th September, 2022 S.O. 4603 (E).— In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the Polyester Continuous Filament Fully Drawn Yarn (Quality Control) Order, 2022, namely:— 1. Short title and commencement. – (1) This order may be called the Polyester Continuous Filament Fully Drawn Yarn (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette.[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 9 2. In the Polyester Continuous Filament Fully Drawn Yarn (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub-paragraph shall be substituted, namely:— ―(2) It shall come into force on the 3rd day of April, 2023.‖ 3. In the said Order, after paragraph 4, for the TABLE, the following TABLE shall be substituted, namely:— ―TABLE Goods or article Indian Standard Title for Indian Standard (1) (2) (3) Polyester Continuous Filament IS 17261:2022 Textile-Polyester Continuous Filament Fully Fully Drawn Yarn (FDY) Drawn Yarns - Specification Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note: The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022 vide number S.O. 1649(E), dated the 5th April, 2022. आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4604 (अ).—केन्द्रीय सरकार, भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करत े हुए, भारतीय मानक ब्यरू ो से परामि व के पश्चात , की यह राय ह ैदक, लोकजहत म ें ऐसा करना आर्श्यक या समीचीन ह,ै पॉजलएस्ट्टर पारजियली ऑिरएंटेड यान व (गुणर्त्ता जनयंत्रण) आदेि, 2022 का संिोधन करने के जलए जनम्नजलजखत आदिे करती ह,ै अथावत्:- 1. संजिप्त नाम, प्रारंभ और लाग ू होना- )1( इस आदेि का संजिप्त नाम पॉजलएस्ट्टर पारजियली ऑिरएंटेड यान व (गणु र्त्ता जनयंत्रण), संिोधन आदेि, 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. पॉजलएस्ट्टर पारजियली ऑिरएटं ेड यान व (गणु र्त्ता जनयंत्रण) आदेि, 2022 (जिसे इसमें इसके पश्चात उि आदिे कहा गया ह)ै के, पैरा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथावत:्- "(2) यह 3 अप्रलै , 2023, को प्रर्ृत्त होगा।" 3. उि आदेि म,ें पैरा 4 के पश्चात सारणी के स्ट्थान पर जनम्नजलजखत सारणी रखी िाएगी, अथातव ्:- “सारणी माल या र्स्ट्तएु ं भारतीय मानक भारतीय मानक के जलए नाम (1) (2) (3) पॉजलएस्ट्टर पारजियली ऑिरएटं ेड आईएस 17262: 2022 टेक्सटाइल- पॉजलएस्ट्टर पारजियली यानव (पी ओ र्ाई) ऑिरएंटेड यान व (पीओर्ाई)- जर्जनदेि10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] िट्पण : सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यूरो द्वारा िारी दकए गए ऐसे संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यूरो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण : मलू आदेि भारत के रािपत्र, असाधारण, भाग-II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1650 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । ORDER New Delhi, the 29th September, 2022 S.O. 4604 (E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the Polyester Partially Oriented Yarns (Quality Control) Order, 2022, namely:— 1. Short title and commencement. – (1) This order may be called the Polyester Partially Oriented Yarns (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette. 2. In the Polyester Partially Oriented Yarns (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub-paragraph shall be substituted, namely:— ―(2) It shall come into force on the 3rd day of April, 2023.‖ 3. In the said Order, after paragraph 4, for the TABLE, the following TABLE shall be substituted, namely:— ―TABLE Goods or article Indian Standard Title for Indian Standard (1) (2) (3) Polyester Partially Oriented Yarns IS 17262:2022 Textile - Polyester Partially Oriented Yarns (POY) (POY) - Specification Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022 vide number S.O. 1650(E), dated the 5th April, 2022.[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 11 आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4605 (अ).—केन्द्रीय सरकार, भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यरू ो से परामि वके पश्चात , की यह राय ह ैदक, लोकजहत म ेंऐसा करना आर्श्यक या समीचीन ह,ै पॉजलएस्ट्टर स्ट्टेपल फाइबसव (गुणर्त्ता जनयंत्रण) आदिे , 2022 का संिोधन करने के जलए जनम्नजलजखत आदिे करती ह,ै अथावत्:- 1. संजिप्त नाम, प्रारंभ और लाग ूहोना- )1( इस आदिे का संजिप्त नाम पॉजलएस्ट्टर स्ट्टेपल फाइबस व(गुणर्त्ता जनयंत्रण), संिोधन आदेि, 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. पॉजलएस्ट्टर स्ट्टेपल फाइबसव (गणु र्त्ता जनयंत्रण) आदिे , 2022 (जिसे इसमें इसके पश्चात उि आदेि कहा गया ह)ै के, पैरा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथावत:्- "(2) यह 3 अप्रैल, 2023, को प्रर्ृत्त होगा।" 3. उि आदेि म,ें पैरा 4 के पश्चात सारणी के स्ट्थान पर जनम्नजलजखत सारणी रखी िाएगी, अथातव :- “सारणी माल या र्स्ट्तएु ं भारतीय मानक भारतीय मानक के जलए नाम (1) (2) (3) पॉजलएस्ट्टर स्ट्टेपल फाइबस व(पी आईएस 17263:2022 टेक्सटाइल - पॉजलएस्ट्टर स्ट्टेपल फाइबस व - एस एफ) जर्जनदेि िट्पण : सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यरू ो द्वारा िारी दकए गए ऐस े संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यूरो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण : मूल आदेि भारत के रािपत्र, असाधारण, भाग II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1651 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । ORDER New Delhi, the 29th September, 2022 S.O. 4605 (E).— In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the Polyester Staple Fibres (Quality Control) Order, 2022, namely:— 1. Short title and commencement. – (1) This order may be called the Polyester Staple Fibres (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette.12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 2. In the Polyester Staple Fibres (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub-paragraph shall be substituted, namely:— ―(2) It shall come into force on the 3rd day of April, 2023.‖ 3. In the said Order, after paragraph 4, for the TABLE, the following TABLE shall be substituted, namely:— ―TABLE Goods or article Indian Standard Title for Indian Standard (1) (2) (3) Polyester Staple Fibres (PSF) IS 17263:2022 Textile - Polyester Staple Fibres - Specification Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022 vide number S.O. 1651(E), dated the 5th April, 2022. आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4606 (अ).—केन्द्रीय सरकार, भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करत े हुए, भारतीय मानक ब्यरू ो से परामि व के पश्चात , की यह राय ह ैदक, लोकजहत म ें ऐसा करना आर्श्यक या समीचीन ह,ै पॉजलएस्ट्टर इंडस्ट्रीयल यानव (गुणर्त्ता जनयंत्रण) आदेि, 2022 का संिोधन करन े के जलए जनम्नजलजखत आदिे करती ह,ै अथावत्:- 1. संजिप्त नाम, प्रारंभ और लाग ूहोना- )1( इस आदेि का संजिप्त नाम पॉजलएस्ट्टर इंडस्ट्रीयल यानव (गुणर्त्ता जनयंत्रण), संिोधन आदेि, 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. पॉजलएस्ट्टर इंडस्ट्रीयल यान व (गणु र्त्ता जनयंत्रण) आदेि, 2022 (जिसे इसमें इसके पश्चात उि आदेि कहा गया ह)ै के, पैरा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथावत:् - "(2) यह 3 अप्रैल, 2023, को प्रर्ृत्त होगा।" 3. उि आदेि म,ें पैरा 4 के पश्चात सारणी के स्ट्थान पर जनम्नजलजखत सारणी रखी िाएगी, अथातव ्:- “सारणी माल या र्स्ट्तएु ं भारतीय मानक भारतीय मानक के जलए नाम (1) (2) (3) पॉजलएस्ट्टर इंडस्ट्रीयल यान व (आई आईएस 17264: 2022 टेक्सटाइल- पॉजलएस्ट्टर इंडस्ट्रीयल यान व - डी र्ाई) जर्जनदेि[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 13 िट्पण: सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यरू ो द्वारा िारी दकए गए ऐसे संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यरू ो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण : मूल आदेि भारत के रािपत्र, असाधारण, भाग II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1652 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । ORDER New Delhi, the 29th September, 2022 S.O. 4606 (E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the Polyester Industrial Yarn (Quality Control) Order, 2022, namely:— 1. Short title and commencement. – (1) This order may be called the Polyester Industrial Yarn (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette. 2. In the Polyester Industrial Yarn (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub-paragraph shall be substituted, namely:— ―(2) It shall come into force on the 3rd day of April, 2023.‖ 3. In the said Order, after paragraph 4, for the TABLE, the following TABLE shall be substituted, namely:— ―TABLE Goods or article Indian Standard Title for Indian Standard (1) (2) (3) Polyester Industrial Yarn (IDY) IS 17264:2022 Textile - Polyester Industrial Yarn - Specification Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022 vide number S.O. 1652 (E), dated the 5th April, 2022.14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4607 (अ).—केन्द्रीय सरकार, भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करत े हुए, भारतीय मानक ब्यरू ो से परामि व के पश्चात , की यह राय ह ैदक, लोकजहत म ें ऐसा करना आर्श्यक या समीचीन ह,ै 100 परसेंट पॉजलएस्ट्टर स्ट्पन ग्र े एंड व्हाइट यान व (गुणर्त्ता जनयंत्रण) आदेि, 2022 का संिोधन करने के जलए जनम्नजलजखत आदिे करती ह,ै अथावत:्- 1. संजिप्त नाम, प्रारंभ और लाग ू होना- )1( इस आदिे का संजिप्त नाम 100 परसेंट पॉजलएस्ट्टर स्ट्पन ग्र े एडं व्हाइट यानव (गुणर्त्ता जनयंत्रण), संिोधन आदेि, 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. 100 परसेंट पॉजलएस्ट्टर स्ट्पन ग्र े एंड व्हाइट यान व (गुणर्त्ता जनयंत्रण) आदेि, 2022 (जिसे इसमें इसके पश्चात उि आदेि कहा गया ह)ै के, पैरा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथातव ्: - "(2) यह 3 अप्रैल, 2023, को प्रर्ृत्त होगा।" 3. उि आदेि म,ें पैरा 4 के पश्चात सारणी के स्ट्थान पर जनम्नजलजखत सारणी रखी िाएगी, अथावत:्- “सारणी माल या र्स्ट्तएु ं भारतीय मानक भारतीय मानक के जलए नाम (1) (2) (3) 100 परसेंट पॉजलएस्ट्टर स्ट्पन ग्र े आईएस 17265:2022 टेक्सटाइल - 100 परसेंट पॉजलएस्ट्टर स्ट्पन ग्र े एंड व्हाइट यान व (पी एस र्ाई) एंड व्हाइट यान व - जर्जनदेि िट्पण : सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यूरो द्वारा िारी दकए गए ऐस े संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यरू ो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण : मूल आदेि भारत के रािपत्र, असाधारण, भाग II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1653 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । ORDER New Delhi, the 29th September, 2022 S.O. 4607(E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the 100 Percent Polyester Spun Grey and White Yarn (Quality Control) Order, 2022 , namely:— 1. Short title and commencement. – (1) This order may be called the 100 Percent Polyester Spun Grey and White Yarn (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette.[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 15 2. In the 100 Percent Polyester Spun Grey and White Yarn (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub- paragraph shall be substituted, namely:— ―(2) It shall come into force on the 3rd day of April, 2023.‖ 3. In the said Order, after paragraph 4, for the TABLE, the following TABLE shall be substituted, namely:— ―TABLE Goods or article Indian Standard Title for Indian Standard (1) (2) (3) 100 Percent Polyester Spun IS 17265:2022 Textile - 100 Percent Polyester Spun Grey Grey and White Yarn (PSY) and White Yarn - Specification Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022 vide number S.O. 1653 (E), dated the 5th April, 2022. आदेि नई ददल्ली, 29 जसतम्ब र, 2022 का.आ. 4608 (अ).—केन्द्रीय सरकार, भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करते हुए, भारतीय मानक ब्यूरो से परामि व के पश्चात , की यह राय ह ै दक, लोकजहत में ऐसा करना आर्श्यक या समीचीन ह,ै ल्सथेिटक माइक्रो-फाइबर फॉर यूि इन सीमेंट बेस्ट्ड मैिरक्स (गणु र्त्ता जनयंत्रण) आदिे , 2022 का संिोधन करन े के जलए जनम्नजलजखत आदेि करती ह,ै अथावत्:- 1. संजिप्त नाम, प्रारंभ और लाग ू होना- )1( इस आदेि का संजिप्त नाम ल्सथेिटक माइक्रो-फाइबर फॉर यूि इन सीमेंट बेस्ट्ड मैिरक्स (गुणर्त्ता जनयंत्रण), संिोधन आदिे , 2022 ह।ै (2) यह रािपत्र म ेंउसके प्रकािन की तारीख को प्रर्ृत्त होगा। 2. ल्सथेिटक माइक्रो-फाइबर फॉर यूि इन सीमेंट बेस्ट्ड मैिरक्स (गणु र्त्ता जनयंत्रण) आदिे , 2022 (जिसे इसमें इसके पश्चात उि आदेि कहा गया ह)ै के, पैरा 1 के, उप-पैरा (2) के स्ट्थान पर जनम्नजलजखत उप-पैरा रखा िाएगा, अथावत:्- "(2) यह 3 अप्रैल, 2023, को प्रर्ृत्त होगा।" 3. उि आदेि म,ें पैरा 4 के पश्चात सारणी के स्ट्थान पर जनम्नजलजखत सारणी रखी िाएगी, अथातव ्:- “सारणी माल या र्स्ट्तएु ं भारतीय मानक भारतीय मानक के जलए नाम (1) (2) (3) ल्सथेिटक माइक्रो-फाइबर फॉर यूि आईएस16481:2022 टेक्सटाइल्स- ल्सथेिटक माइक्रो-फाइबर फॉर यूि इन सीमेंट बेस्ट्ड मैिरक्स इन सीमेंट बेस्ट्ड मैिरक्स - जर्जनदेि16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] िट्पण : सारणी के प्रयोिनों के जलए, भारतीय मानक ब्यूरो द्वारा िारी दकए गए ऐसे संिोधनों सजहत उसका नर्ीनतम संस्ट्करण, जिन्द्ह ें समय - समय पर भारतीय मानक ब्यरू ो द्वारा अजधसूजचत दकया िाए, ऐसी अजधसूचना की तारीख से लागू होगा।” [फा. स.ं पीसी-II 46016/6/2020-टेक. सीपीसी भाग-1] सुिांत कुमार परु ोजहत, संयुि सजचर् िट्पण: मलू आदेि भारत के रािपत्र, असाधारण, भाग II, खंड 3, उप-खंड (ii) तारीख 6 अप्रैल, 2022 में का.आ. संख्या 1654 (अ) तारीख 5 अप्रैल, 2022 द्वारा प्रकाजित दकया गया था । ORDER New Delhi, the 29th September, 2022 S.O. 4608 (E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after consulting the Bureau of Indian Standards is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following order to amend the Synthetic Micro-Fibres for use in Cement Based Matrix (Quality Control) Order, 2022, namely:— 1. Short title and commencement. – (1) This order may be called the Synthetic Micro-Fibres for use in Cement Based Matrix (Quality Control) Amendment Order, 2022. (2) It shall come into force on the date of its publication in the official Gazette. 2. In the Synthetic Micro-Fibres for use in Cement Based Matrix (Quality Control) Order, 2022 (hereinafter referred to as the said Order), in paragraph 1, for sub-paragraph (2), the following sub- paragraph shall be substituted, namely:— ―(2) It shall come into force on the 3rd day of April, 2023.‖ 3. In the said Order, after paragraph 4, for the TABLE, the following TABLE shall be substituted, namely:— ―TABLE Goods or article Indian Standard Title for Indian Standard (1) (2) (3) Synthetic Micro-Fibres for use IS 16481:2022 Textile - Synthetic Micro-Fibres for use in in Cement Based Matrix Cement Based Matrix - Specification Note : For the purposes of the TABLE, the latest version of the Indian Standards including the amendments issued thereof, as may be notified by the Bureau of Indian Standards from time to time, shall apply from the date of such notification‖. [F. No. PC-II 46016/ 6/2020-Tech.CPC Pt- 1] SUSANTA KUMAR PUROHIT, Jt. Secy. Note : The principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), dated the 6th April, 2022 vide number S.O. 1654 (E), dated the 5th April, 2022. Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research