Home Europe EEA Joint Committee Decision of the EEA joint Committee No 317/2023 of 8 Decembe...
Date: 13-Jun-2024 Category: Not Applicable State: Union Government Country: Europe

Decision of the EEA joint Committee No 317/2023 of 8 December 2023 amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement [2024/1407]

Issued by EEA Joint Committee · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

What it means

  • Decision of the EEA Joint Committee No 317/2023 amends Annex II to the EEA Agreement to incorporate Regulation (EU) 2019/1020 on market surveillance and compliance of products, Implementing Regulation (EU) 2021/1121 specifying statistical data for controls on products entering the Union market, and Implementing Regulation (EU) 2022/1267 specifying procedures for designation of Union testing facilities.

Key Changes

  • Regulation (EU) 2019/1020 is incorporated into the EEA Agreement, amending Chapter XVII (Directive 2004/42/EC) and Chapter XIX (Regulation (EC) No 765/2008) of Annex II.
  • Implementing Regulation (EU) 2021/1121 is incorporated into the EEA Agreement, specifying details of statistical data to be submitted by Member States regarding controls on product safety and compliance.
  • Implementing Regulation (EU) 2022/1267 is incorporated into the EEA Agreement, specifying procedures for the designation of Union testing facilities for market surveillance and verification of product compliance.
  • Adaptations are made to Regulation (EU) 2019/1020 and Implementing Regulations (EU) 2021/1121 to account for the EFTA States' national laws and customs procedures.
  • EFTA States participate fully, without the right to vote, in the Union Product Compliance Network. The EFTA Surveillance Authority participates as an observer.

Impact Analysis

Businesses operating within the EEA

  • Action Item: Review current product compliance processes and update them to align with the requirements of Regulation (EU) 2019/1020 and related implementing regulations.

EFTA States

  • Action Item: EFTA States should review and update their national laws and customs procedures to reflect the adaptations outlined in the Decision.

Market Surveillance Authorities

  • Action Item: Market surveillance authorities should develop and implement procedures for enforcing the new regulations and participating in the Union Product Compliance Network.

Key Entities Referenced

EEA Joint Committee: The decision-making body responsible for amending the EEA Agreement. Regulation (EU) 2019/1020: Regulation of the European Parliament and of the Council on market surveillance and compliance of products. Implementing Regulation (EU) 2021/1121: Commission Implementing Regulation specifying the details of the statistical data to be submitted by the Member States as regards controls on products entering the Union market with regard to product safety and compliance. Implementing Regulation (EU) 2022/1267: Commission Implementing Regulation specifying the procedures for the designation of Union testing facilities for the purposes of market surveillance and verification of product compliance in accordance with Regulation (EU) 2019/1020. EFTA States: The European Free Trade Association states that are part of the EEA Agreement (excluding Switzerland). EFTA Surveillance Authority: The body responsible for monitoring compliance with EEA rules in the EFTA States. Directive 2004/42/EC: Directive of the European Parliament and of the Council on the limitation of emissions of volatile organic compounds due to the use of organic solvents in certain paints and varnishes and vehicle refinishing products. Regulation (EC) No 765/2008: Regulation of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products. Regulation (EU) No 305/2011: Regulation of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products.
Official Source Record View Original Source →
See Full Document Text
Official Journal EN of the European Union L series 2024/1407 13.6.2024 DECISION OF THE EEA JOINT COMMITTEE No 317/2023 of 8 December 2023 amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement [2024/1407] THE EEA JOINT COMMITTEE, Having regard to the Agreement on the European Economic Area (“the EEA Agreement”), and in particular Article 98 thereof, Whereas: (1) Regulation (EU) 2019/1020 of the European Parliament and of the Council of 20 June 2019on market surveillance and compliance of products and amending Directive 2004/42/EC and Regulations (EC) No 765/2008 and (EU) No 305/2011(1)is to be incorporated into the EEA Agreement. (2) Commission Implementing Regulation (EU) 2021/1121 of 8 July 2021specifying the details of the statistical data to be submitted by the Member States as regards controls on products entering the Union market with regard to product safety and compliance(2)is to be incorporated into the EEA Agreement. (3) Commission Implementing Regulation (EU) 2022/1267 of 20 July 2022 specifying the procedures for the designation of Union testing facilities for the purposes of market surveillance and verification of product compliance in accordance with Regulation (EU) 2019/1020 of the European Parliament and of the Council(3)is to be incorporated into the EEA Agreement. (4) Annex II to the EEA Agreement should therefore be amended accordingly, HAS ADOPTED THIS DECISION: Article 1 Annex II to the EEA Agreement shall be amended as follows: 1. The following indent is added in point 9 (Directive 2004/42/EC of the European Parliament and of the Council) of Chapter XVII: ‘— 32019 R 1020: Regulation (EU) 2019/1020 of the European Parliament and of the Council of 20 June 2019 (OJ L 169, 25.6.2019, p. 1).’ 2. Point 3b (Regulation (EC) No 765/2008 of the European Parliament and of the Council) of Chapter XIX is amended as follows: (i) The following is added: ‘, as amended by: — 32019 R 1020: Regulation (EU) 2019/1020 of the European Parliament and of the Council of 20 June 2019(OJ L 169, 25.6.2019, p. 1).’; (ii) Adaptation (b) is deleted. (1) OJ L 169, 25.6.2019, p. 1. (2) OJ L 243, 9.7.2021, p. 37. (3) OJ L 192, 21.7.2022, p. 21. ELI: http://data.europa.eu/eli/dec/2024/1407/oj 1/3EN OJ L, 13.6.2024 3. The following is inserted after point 3ua (Commission Implementing Regulation (EU) 2020/1668) of Chapter XIX: ‘3v. 32019 R 1020: Regulation (EU) 2019/1020 of the European Parliament and of the Council of 20 June 2019 on market surveillance and compliance of products and amending Directive 2004/42/EC and Regulations (EC) No 765/2008 and (EU) No 305/2011 (OJ L 169, 25.6.2019, p. 1). The provisions of the Regulation shall, for the purposes of this Agreement, be read with the following adaptations: (a) Unless otherwise specified, references to Union law shall be understood as referring to the EEA Agreement. (b) Article 3 shall be amended as follows: (i) in paragraph 24, the words “or the customs administrations of the EFTA States responsible for applying the customs legislation and any other authorities of the EFTA States empowered under national law to apply certain customs legislation” shall be added after the reference to Regulation (EU) No 952/2013; (ii) in paragraph 25, the words “or, as regards the EFTA States, the corresponding procedures in accordance with their respective national customs legislation” shall be added after the reference to Regulation (EU) No 952/2013; (iii) in paragraph 26, the words “or within the customs territories of the EFTA States” shall be added after the words “customs territory of the Union”. (c) In paragraph 2 of Article 14, the words “, including the principles of the Charter of Fundamental Rights of the European Union” shall not apply to the EFTA States. (d) In paragraphs 3 and 4 of Article 25 and in the second subparagraph of Article 28(4), references to Regulation (EU) No 952/2013 of the European Parliament and of the Council shall, as regards the EFTA States, be understood to refer to corresponding provisions of national customs law. (e) As regards Liechtenstein, obligations on authorities designated under Article 25(1) shall be governed by national law. (f) Products exported from Liechtenstein to the other Contracting Parties may be subjected to controls in accordance with Articles 25 to 28 when entering the EEA. (g) Articles 25(2), (4) and (6) and 34(6) shall not apply to Liechtenstein. (h) Article 26(4) shall not apply to the EFTA States. (i) In Article 28, as regards the EFTA States, the words “the customs data-processing system” shall read “any notification issued to the affected parties in accordance with national procedures”. (j) The EFTA States shall participate fully, without the right to vote, in the Union Product Compliance Network in accordance with Articles 29-31. The EFTA Surveillance Authority shall participate as observer. 3va. 32021 R 1121: Commission Implementing Regulation (EU) 2021/1121 of 8 July 2021specifying the details of the statistical data to be submitted by the Member States as regards controls on products entering the Union market with regard to product safety and compliance (OJ L 243, 9.7.2021, p. 37). 2/3 ELI: http://data.europa.eu/eli/dec/2024/1407/ojEN OJ L, 13.6.2024 The provisions of the Implementing Regulation shall, for the purposes of this Agreement, be read with the following adaptations: (a) In paragraphs 1(c) and 4 of Article 1, references to Commission Delegated Regulation (EU) 2015/2446 shall, as regards the EFTA States, be understood to refer to corresponding provisions of national customs law. (b) In paragraph 1(c)(ix) of Article 1, the words “Union legislation” shall be replaced by the words “provisions of the EEA Agreement”. 3vb. 32022 R 1267: Commission Implementing Regulation (EU) 2022/1267 of 20 July 2022 specifying the procedures for the designation of Union testing facilities for the purposes of market surveillance and verification of product compliance in accordance with Regulation (EU) 2019/1020 of the European Parliament and of the Council (OJ L 192, 21.7.2022, p. 21).’ 4. The following indent is added in point 1 (Regulation (EU) No 305/2011 of the European Parliament and of the Council) of Chapter XXI: ‘— 32019 R 1020: Regulation (EU) 2019/1020 of the European Parliament and of the Council of 20 June 2019 (OJ L 169, 25.6.2019, p. 1).’ Article 2 The texts of Regulation (EU) 2019/1020 and Implementing Regulations (EU) 2021/1121 and (EU) 2022/1267 in the Icelandic and Norwegian languages, to be published in the EEA Supplement to the Official Journal of the European Union, shall be authentic. Article 3 This Decision shall enter into force on 9 December 2023, provided that all the notifications under Article 103(1) of the EEA Agreement have been made(*). Article 4 This Decision shall be published in the EEA Section of, and in the EEA Supplement to, the Official Journal of the European Union. Done at Brussels, 8 December 2023. For the EEA Joint Committee The President Pascal SCHAFHAUSER (*) Constitutional requirements indicated. ELI: http://data.europa.eu/eli/dec/2024/1407/oj 3/3

Continue your research