See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एxलx.x-GअID.-H1x1x0x2 2026-270040
CG-DLxx-xEG-I1D1E0x2x2x0 26-270040
असाधारण
EXTRAORDINARY
भाग II—खण् ड 3—उप-खण्ड (i)
PART II—Section 3—Sub-section (i)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 103] नई ददल्ली, बुधवार, फरवरी 4, 2026/माघ 15, 1947 26/पौष 17, 1947
No. 103] NEW DELHI, WEDNESDAY, FEBRUARY 4, 2026/MAGHA 15, 1947 /PAUSHA 17, 1947
श्रम एव ं रोिगार मत्रं ालय
अजधसचू ना
नई ददल्ली, 4 फरवरी, 2026
सा.का.जन. 109(अ).—जनम्नजलजखत मसौदा जवजनयम, जिन्ह ें केन्र सरकार व्यावसाजयक सुरक्षा, स्ट्वास्ट््य और काय य
दिाए ँ संजहता, 2020 (2020 का 37) की धारा 136 द्वारा प्रदत्त िजियों का प्रयोग करते हुए बनाने का प्रस्ट्ताव करती ह,ै
को धारा 134 की उप धारा (1) की अपेक्षा के अनुसार, उन सभी व्यजियों की सूचना के जलए, जिनके इससे प्रभाजवत होन े
की संभावना ह,ै एतद्द्वारा अजधसूजचत दकया िाता ह ै और एतद्द्वारा नोटिस ददया िाता ह ै दक उि मसौदा अजधसूचना पर
उस तारीख स े 45 ददनों की अवजध की समाजि के बाद जवचार दकया िाएगा, जिस तारीख को रािपत्र की प्रजतया,ं जिसम ें
यह अजधसूचना प्रकाजित की गई ह,ै आम िन के जलए उपलब्ध करा दी िाती ह;ैं आपजत्तयां और सुझाव, यदद कोई हों, को
श्री रजविंकर जनराला, अवर सजचव, भारत सरकार, श्रम एवं रोिगार मंत्रालय, कमरा संख्या: 17, श्रम िजि भवन, रफी
मागय, नई ददल्ली को अथवा ईमेल(cmcdgms1@gmail.com तथा ravis.nirala@nic.in) द्वारा भेिा िा सकता ह।ै
आपजत्तयां और सुझाव एक प्रोफामाय म ें भेि े िाए ँ जिसम ें कॉलम (i) म ें व्यजियों और संगठनों के नाम और पत े का उल्लेख हो,
कॉलम (ii) म ें उस जनयम या उपजनयम का उल्लेख हो जिसे संिोजधत करने का प्रस्ट्ताव ह,ै तथा कॉलम (iii) म ें प्रस्ट्तुत दकए
िाने वाल े संिोजधत जवजनयम या उप जवजनयम और उसके कारणों का उल्लेख हो; उि मसौदा अजधसूचना के संबंध म ें दकसी
व्यजि या सगं ठन स े ऊपर जनर्ददष्ट 45 ददनों की अवजध समाि होने स े पहल े प्राि आपजत्तयों और सुझावों पर केन्र सरकार
द्वारा जवचार दकया िाएगा।
खदान कामगारों के जलए व्यावसाजयक स्ट्वास्ट््य,सरु क्षा और काय य दिाए ं संजहता, 2020 की धारा 136 के तहत
जनर्ददष्ट व्यावसाजयक स्ट्वास्ट््य,सुरक्षा और काय य दिाए ं (धातयु िु खान)ें जवजनयम, 2026.
815 GI/2026 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय I
प्रारंभिक
1. सभं िप्त शीर्कष , प्रारंि, लाग ू होना और भिस्तार।- (1) इन भिभनयमों को व्यािसाभयक सरु िा, स्िास््य और
कायष भस्िभत (धातुयुक्त खान) भिभनयम, 2026 कहा जा सकेगा ।
(2) ये आभधकाररक राजपत्र में प्रकाशन की भतभि से लागू होंगे।
(3) ये धातु या तेल की खदान को छोड़कर प्रत्येक खदान पर लागू होंगे।
(4) इनका भिस्तार संपूर्ष िारत में ह।ै
2. पररिार्ाए.ँ - (1) इन भिभनयमों में, जब तक कक संदिष से अन्यिा अपेभित न हो,-
(क) "छोड़ा गया कायष" से तात्पयष ऐसे काय ष से ह ै भजसे िभिष्य में कायष करन े के इरादे के भबना छोड़ कदया गया
ह;ै
(ख) " एभिट" से अभिप्राय िूभमगत खदान म ें प्रिेश और भनकास, खभनज भनष्कर्षर्, िायुसचं ार और पानी की
भनकासी के प्रयोजनों के भलए एक िैभतज या भनकट-िैभतज प्रिेश द्वार से ह;ै
(ग) “अनुमोकदत सुरिा लैंप” तिा “अनुमोकदत भिद्युत टाचष” से क्रमशः सुरिा लैंप या उस प्रकार का भिद्यतु
टाचष अभिप्रेत ह,ै भजसे मुख्य भनरीिक-सह-सुभिधाकताष समय-समय पर सामान्य या भिशेर् आदेश द्वारा
भिभनर्दषष्ट करे;
(घ) "सहायक प्रबंधक" से तात्पयष प्रबंधक प्रमार्पत्र रखने िाले ऐसे व्यभक्त से ह ै भजस े माभलक, एजेंट या
प्रबंधक द्वारा भलभखत रूप में खान या उसके िाग के प्रबधं न, भनयंत्रर्, पयषिेिर् और भनदेशन में प्रबंधक
की सहायता के भलए भनयुक्त ककया गया ह ै और जो प्रबधं क से ठीक नीचे का पद रखता ह ै और खनन
पयषिेिक और सहायक खनन पयषिेिक से िररष्ठ ह;ै
(ङ) "सहायक खनन पयषिेिक" स े तात्पयष ऐसे व्यभक्त से ह ै भजसके पास प्रबंधक या खनन पयषिेिक या सहायक
खनन पयषिेिक का प्रमार्पत्र हो और भजस े प्रबंधक द्वारा भलभखत रूप में, ककसी िी पदनाम के अंतगषत,
इन भिभनयमों के अंतगषत सहायक खनन पयषिेिक के कतव्यष ों का पालन करने के भलए भनयुक्त ककया गया
हो;
(च) सहायक पंखा से तात्पयष ककसी िायु-प्रेरक पंखा या भनकास पंखा से ह ै भजसका उपयोग पूर्षतया या
मुख्यतया िायु-संचार भजले के एक या एक से अभधक िागों को िायु-संचाररत करने के भलए िूभम के नीच े
ककया जाता ह;ै
(छ) ककसी खान म ें “औसत रोजगार” स े तात्पय ष भपछले कैलेंिर िर्ष के दौरान, जनिरी के पहले कदन स े कदसंबर
के इकतीसिें कदन तक, खान में या खान के ककसी िाग में प्रभतकदन रोजगार प्राप्त व्यभक्तयों की औसत
संख्या से ह ै (जो काम ककए गए मानि कदिसों की संख्या को कायष कदिसों की संख्या से िाग देकर प्राप्त
की जाती ह,ै भजसमें भिश्राम कदिस और अन्य गैर- कायष कदिस शाभमल नहीं ह)ैं ;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 3
(ज) ककसी खान के “औसत उत्पादन” से तात्पयष भिभनर्दषष्ट खान सीमाओं के िीतर समस्त कायों से प्राप्त कुल
उत्पादन का पूिषिती कैलेण्िर िर्ष के दौरान प्रभत माह औसत उत्पादन स े ह;ै
(झ) "बेलमैन" से तात्पयष ककसी व्यभक्त, औजारों, सामभियों को ऊपर उठाने और नीचे लाने के कायष का
पयषिेिर् करन े तिा ककसी इनसेट, लैंडिंग या शाफ्ट तल पर सकं ेतों को प्रेभर्त करने के भलए भनयुक्त
व्यभक्त से ह;ै
(ञ) "ब्लास्टर" से तात्पयष ऐसे व्यभक्त से ह ै भजसके पास प्रबंधक, खनन पयषिेिक, सहायक खनन पयषिेिक या
ब्लास्टर का प्रमार्पत्र ह ै और भजसे प्रबंधक द्वारा भलभखत रूप में इन भिभनयमों के अंतगषत ब्लास्टर के
कतषव्यों का पालन करन े के भलए भनयुक्त ककया गया ह;ै
(ट) "बूस्टर फैन" से तात्पयष एक यांभत्रक िेंरटलेटर से ह ै भजसका उपयोग िूभमगत रूप से ककसी खदान या
िेंरटलेशन िेत्र के इनटेक या ररटनष एयरिे के साि गुजरने िाली हिा के पूरे प्रिाह को बढाने के भलए
ककया जाता ह;ै
(ठ) "बॉक्स कट" से तात्पयष ककसी खभनज िंिार को भिकभसत करने के भलए सुरभित एिं भनरापद प्रिेश द्वार
प्रदान करने के भलए ककया गया प्रारंभिक या पहला आयताकार खुला कट ह ै ;
(ि) "कैलेण्िर िर्ष" का तात्पयष जनिरी के पहले कदन से लके र कदसंबर के 31िें कदन तक के िर्ष से ह;ै
(ढ) ''संभहता'' का तात्पयष व्यिसाभयक, सुरिा, स्िास््य और कायष भस्िभत सभं हता, 2020 से ह;ै
(र्) "सलाहकार" से तात्पयष ऐसी फमष या व्यभक्त या व्यभक्तयों से ह ै जो स्िाभपत प्रौद्योभगककयों तिा प्रर्ाभलयों
का उपयोग करते हुए भिभशष्ट, बौभिक तिा प्रकक्रयात्मक प्रकक्रयाओं से संबंभधत भिशेर्ज्ञ या रर्नीभतक
सलाह सेिाएं प्रदान करते ह ैं और पररर्ाम मुख्य रूप से गरै -िौभतक प्रकृभत के होते ह।ैं
(त) "भगरािट" से तात्पयष सतह स े िूभमगत मागष से या िूभमगत कायष के एक िाग स े दसू रे िाग तक के मागष स े
ह,ै जो शाफ्ट के अलािा ह,ै जो आमतौर पर व्यभक्त और/या मशीनरी की आिाजाही के भलए उपयोग
ककया जाता ह;ै
(ि) "गहरा भछद्र िेधन और भिस्फ ोटन" (िीप होल भिडलंग और ब्लाडस्टंग)- स े ऐसा होल अभिप्रेत ह ै जो ककसी
खुली खदान (ओपेनकास्ट माईडनंग) संकक्रया में तीन मीटर से अभधक गहरा हो और भजसे भिस्फ ोटन करन े
के भलए प्रयुक् त ककया जाना हो;
(आर) "भिजाइनर" का तात्पयष ऐसे व्यभक्त, व्यभक्तयों के संघ, कंपनी या संस्िा से ह ै जो धातुयक्तु खनन
प्रर्ाली, धातुयुक्त खनन की भिभध, मशीनरी, संयंत्र, उपकरर्, साभधत्र या धातुयुक्त खानों में उपयोग के
भलए पदािष भिजाइन करता ह;ै4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(द) िूभमगत खदान के संबंध में “िेिलपमेंट हडे िंग “ (Development Heading) स े तात्पयष ककसी बॉक्स
कट, िाइि, क्रॉस -कट, सुरंग, एभिट, इनक्लाइन, भिक्लाइन, भिफ्ट, रैंप, रेज़, भिनज़ या शाफ्ट से ह ै
भजसे िूभमगत कायों तक पहुचं और सेिाएं प्रदान करने के भलए चलाया जाता ह;ै
(ध ) "िीजल कभर्कीय पदािष" से िीजल भनकास का िह घटक अभिप्रेत ह ै भजसमें सक्ष्ू म (काभलख) कर्
शाभमल होते ह ैं भजनमें अिशोभर्त काबषभनक यौभगक होते ह ैं जो मुख्य रूप से काबषन, राख, धाभत्िक घर्षर्
कर्, सल्फेट्स, नाइट्रेट्स और भसभलकेट्स से बने होत े ह;ैं
(न) "स्ि भगत खनन स्ि ल" का अभिप्राय ककसी खान में ऐसे खनन स्ि ल स े ह ै जहा ँ कायष ककसी
कारर्-िश स्ि भगत कर कदया गया ह ै और िह अगम् य ह ै या अगम् य कर कदया गया ह ै परंत ु िहाँ पुन: काय ष
ककया जाना संिाव् य ह;ै
(प) "अप्रयुक्त कायष" से खान में ऐसा कायष अभिप्रेत ह,ै जहा ं कायष अस्िाई तौर पर रोक कदया गया ह,ै परंतु जो
सुलि ह ै और भजसमें अप्रयुक्त कायष िी शाभमल ह;ै
(फ) "भिद्युत पयषिेिक" स े तात्पयष इन भिभनयमों म ें पररिाभर्त योग्यता और अनुिि रखने िाल े व्यभक्त से ह,ै
भजसे प्रबंधक द्वारा भलभखत रूप में, ककसी िी पदनाम के तहत, उसके प्रिार में रखे गए भिद्युत स्िापन के
भनमाषर्, चाल ू करने, मरम्मत, रखरखाि, बंद करने और सुरभित कामकाज के पयषिेिर् या भनयंत्रर् के
कतषव्यों का पालन करन े के भलए भनयुक्त ककया जाएगा, जो एक इंजीभनयर के अधीनस्ि होगा;
(ब) “इलक्े ट्रीभशयन” से तात्पयष केंद्रीय भिद्युत प्राभधकरर् (सुरिा और भिद्युत आपूर्तष संबंधी उपाय) भिभनयम,
2023 के भिभनयम 31 के तहत भिभधित लाइससें प्राप्त या अनुमत व्यभक्त से ह,ै और भजसे खान के
माभलक, अभिकताष या प्रबंधक द्वारा भिभनयम 117 के तहत भलभखत रूप में भनयुक्त और अभधकृत ककया
गया हो, ताकक िह िैध योग्यता प्रमार् पत्र रखन े िाले भिद्युत पयषिेिक की देखरेख में खान में भिद्युत
कायष कर सकेI
(ि) "भिस्फोटक" का िही अि ष होगा, जो िारतीय भिस्फोटक अभधभनयम, 1884 (1884 का 4) में कदया गया
ह;ै
(म) “स्पदं न कक्रया मान (एक्सपोज़र एक्शन िल्ै यू)” (ई ए िी)- का अिष कंपन के दैभनक जोभखम की मात्रा
का िह स्तर ह,ै भजसके एक भनभित मान को पार करने पर भनयोक्ताओं को कंपन स्तर को भनयंभत्रत करने के
भलए कारषिाई करनी पड़ती ह ै और इस े आठ घंटे के औसत आधार पर मीटर प्रभत िगष सेकंि (मी/सेकेंि 2) म ें
व्यक्त ककया जाता ह,ै यानी ए (8)।
स्पष्टीकरर्: A(8) का अि ष ह ै एक कदन में आठ (8) घंटे का औसत (A) एक्सपोजर से ह।ै ;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 5
(य) “स्पदं न सीमा मान (एक्सपोज़र भलभमट िल्ै यू)”[ईएलिी]- स े तात्पयष उस अभधकतम स्पंदन मात्रा से ह,ै
भजसके संपकष में कोई श्रभमक प्रभतकदन आठ (8) घंटे की औसत अिभध में रहता ह,ै तिा भजसे मीटर प्रभत
सेकंि िगष A(8) में व्यक्त ककया जाता ह;ै
(र) "मुख" से तात्पयष ककसी कायष स्िान के चलत े हुए अििाग या ककसी िाइि, लेिल, क्रॉसकट, रेज़ या
भिनज़ इत्याकद के अंदरूनी भसरे स े ह;ै
(ल) "अभिशमन हाइिेंट प्रर्ाली" से तात्पयष पाइप नेटिकष की एक प्रर्ाली से ह ै जो आग से भनपटने के भलए तरु ंत
जल उपलब्ध करान े के भलए मुख्य जल आपूर्तष से सीधे जड़ु ा होता ह ै ;
(जेििी) "ज्िालारोधी पररसर (फ्लमे प्रफु एन्क् ल ोजर)" का िही अि ष होगा जैसा केंद्रीय भिद्युत प्राभधकरर्
(सुरिा और भिद्यतु आपूर्तष से संबंभधत उपाय) भिभनयमन, 2023 के तहत पररिाभर्त ककया गया ह;ै
(ि) "प्रपत्र" से तात्पयष ऐसे प्रपत्र से ह ै भजसे इन भिभनयमों के अन्तगषत मुख्य भनरीिक-सह-सुभिधाकताष द्वारा
आदेश या अनुदेश द्वारा भनर्दष्टष ककया जा सकता ह;ै
(श) "गैस" में धुआँ या िाष्प सभम्मभलत ह;ै
(र्) "िायु का सामान्य भनकाय" से िूभमगत काय ष में सामान्य िातािरर् अभिप्रेत ह ै और इसमें छत की गुहाओं
में िातािरर् शाभमल ह,ै ककंतु इसमें सीलबंद िेत्र या अयस्क या अपभशष्ट चट्टान में भिल ककए गए ककसी
बोरहोल में सामान्य िातािरर् शाभमल नहीं ह;ै
(स) "ढुलाई पररचारक (हौलजे अटेंिटें )" से तात्पयष खान में ढुलाई कायों के संबंध में भनयोभजत एक प्रभशभित
और अभधकृत व्यभक्त स े ह,ै जो टब, खदान कारों या अन्य िाहनों की सुरभित आिाजाही म ें सहायता
करता ह,ै और संभहता, भिभनयमों और उसके तहत बनाए गए आदेशों के प्रािधानों के अनुसार कपडलंग,
अनकपडलंग, भसिडलंग, ट्रैक भस्िचओिर संचालन और ढुलाई मागष के पयषिेिर् से सबं ंभधत कतषव्यों का
पालन करता ह।ै
(ह) "हॉलेज इंजन ऑपरेटर" स े तात्पयष एक सिम और अभधकृत व्यभक्त स े ह ै जो संभहता, भिभनयमों और उसके
अधीन बनाए गए आदेशों के उपबंधों के अनुसार, सतह पर या िूभमगत खदान में टब, िैगन, माइन कार
या अन्य िार ढोने के भलए उपयोग ककए जाने िाले हॉलेज इंजन के सुरभित संचालन, भनयंत्रर् और
पयषिेिर् के भलए भजम्मेदार ह;ै
(ि) "ढोना सड़क" से तात्पयष ककसी मागष या सड़क से ह,ै भजसका अनुरिर् ककया जाता ह ै तिा भजसका उपयोग
ककसी खदान की सीमा के िीतर मशीनरी चलान े के भलए खुली खदानों के संचालन के सम्बन्ध में ककया
जाता ह;ै6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(त्र) "िारी भमट्टी हटान े िाली मशीनरी (एचईएमएम)" से तात्पयष खुली खदानों में खुदाई, भिडलंग (पचास
भमलीमीटर तक व्यास का छेद भिल करने में सिम हस्तचाभलत भिल और भिल मशीनों को छोड़कर),
कॉम्पैडक्टंग, िेडजंग, कटाई, हाइिॉभलककंग, ररडपंग, िोडजंग, िेडिंग, खुदाई, मोबाइल जल भछड़काि,
सामिी लोि करने या पररिहन के भलए उपयोग की जान े िाली मशीनरी से ह;ै
(ज्ञ) "इनसेट" का अिष शाफ्ट में कोई लैंडिंग या प्लेटफामष ह ै और इसमें शाफ्ट के ऊपर और नीच े के बीच की
खुदाई िी शाभमल ह;ै
(कक) "आंतररक रूप से सरु भित" का िही अि ष होगा जसै ा कक समय-समय पर संशोभधत केंद्रीय भिद्यतु
प्राभधकरर् (सुरिा और भिद्यतु आपूर्तष स े संबंभधत उपाय) भिभनयम, 2023 के अंतगतष पररिाभर्त ककया
गया ह;ै
(कख) "लैंडिंग" से तात्पयष ककसी शाफ्ट या भिनज़ में ककसी फशष या प्लेटफामष से ह,ै भजसे खान प्रबंधक द्वारा
डपंजरे या पररिहन के अन्य साधन के ठहराि स्िान के रूप में अभधकृत ककया गया ह;ै
(कग) "लोकोमोरटि" से अभिप्राय रेल पर आरूढ स्िचाभलत मशीनरी से ह ै भजसका उपयोग खान में सामिी के
पररिहन के भलए टब या टबों की कतार को खींचन े के भलए ककया जाता ह;ै
(कघ) "लोकोमोरटि प्रचालक" स े तात्पयष ऐसे व्यभक्त स े ह ै भजस े इस भिभनयमन के उपबंधों के अनसु ार खान
प्रबंधक द्वारा अभधकृत ककया गया ह ै , और जो ककसी खान में प्रयुक्त होन े िाले लोकोमोरटि को चलान े
तिा भनयभं त्रत करने में सिम ह ै , भजसमें ब्रेककंग, भसिडलंग और सरु िा प्रर्ाभलयां िी शाभमल ह ैं ;
(कङ) "प्रबंधक" से तात्पयष व्यिसाभयक सुरिा, स्िास््य और कायष भस्िभत संभहता, 2020 की धारा 67 के
अंतगषत भनयुक्त प्रबंधक से ह;ै
(कच) "भनमाषता" से तात्पयष ऐस े व्यभक्त, व्यभक्तयों के संघ, कंपनी या संस्िा स े ह ै जो धातुयुक्त खानों में उपयोग के
भलए मशीनरी, संयंत्र, उपकरर्, युभक्त या पदािों का भिभनमाषर् करता ह;ै
(कछ) "सामिी" में चट्टान, मलबा, अपभशष्ट, पत्िर, खभनज या अयस्क शाभमल ह;ैं
(कज) "मैकेभनक" या "कफटर" से तात्पयष ककसी खान के स्िामी, अभिकताष या प्रबंधक द्वारा भिभधित भनयुक्त तिा
अभधकृत ककसी व्यभक्त से ह,ै जो खान में मशीनरी, उपकरर् या साभधत्रों की संस्िापना, कफटटंग,
समायोजन, रख-रखाि, मरम्मत या परीिर् करन े के भलए काय ष करता ह,ै और जो संभहता, इन
भिभनयमों तिा इसके अधीन बनाए गए आदेशों के उपबंधों के अनुसार ऐसे कायष को सुरभित और उभचत
ढंग से करन े के भलए प्रभशभित तिा सिम ह;ै
(कझ) "यांभत्रक पयषिेिक" से तात्पयष इन भिभनयमों में भनधाषररत योग्यता और अनुिि रखने िाले व्यभक्त से ह,ै
भजसे स्िामी, अभिकताष या प्रबंधक द्वारा भलभखत रूप में, ककसी िी पदनाम के तहत, उसके प्रिार में रखी
गई मशीनरी के भनमाषर्, चालू करने, मरम्मत, रखरखाि, बंद करन े और सरु भित कामकाज के पयषिेिर्
या भनयंत्रर् के कतषव्यों का पालन करने के भलए भनयुक्त ककया जाएगा, जो इंजीभनयर के अधीनस्ि होगा;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 7
(कञ) "यत्रं ीकृत खुली खदान" से तात्पयष ऐसी खुली खदान स े ह,ै जो खुली खदान भिभध को अपनाती ह,ै भजसम ें
गहरे होल भिस्फोट तकनीक का उपयोग ककया जा सकता ह ै या नहीं िी ककया जा सकता ह ै और भजसमें िारी
भमट्टी हटाने िाली मशीनरी, क्रशर, स्क्रीन, स्टेकर, ररक्लेमर, कन्िेयर, स्लरी पाइपलाइन और अन्य सहायक
मशीनरी में से ककसी एक या संयोजन का उपयोग ककया जाता ह।ै
(कट) "धातुयुक्त खान" में धातु या तेल खान के अलािा प्रत्येक खान शाभमल ह;ै
(कठ) "खनन पयषिेिक" से तात्पयष ऐसे व्यभक्त से ह ै भजसके पास प्रबंधक या खनन पयषिेिक का प्रमार्पत्र ह,ै
भजसे प्रबंधक द्वारा भलभखत रूप में, ककसी िी पदनाम के तहत, खदान या उसके िाग में पयषिेिर् या
भनयंत्रर् के कतव्यष ों का पालन करन े के भलए भनयुक्त ककया जाता ह,ै और जो सहायक खनन पयषिेिक से
इस प्रकार िररष्ठ ह;ै
(कि) "भमसफायर" से तात्पयष शॉट-होल या ब्लास्ट होल में भिस्फोटकों के पूरे चाजष का भिस्फोट करने में
भिफलता से ह;ै
(कढ) "माह" से कलेण्िर माह अभिप्रेत ह;ै
(कर्) "अभधकारी" का अिष ककसी खदान या उसके िाग में पयषिेिर् के कतषव्यों का पालन करने के भलए स्िामी,
अभिकताष या प्रबंधक द्वारा भलभखत रूप में भनयुक्त ककया गया व्यभक्त ह ै और इसमें केंद्रीय भिद्युत
प्राभधकरर् (सुरिा और भिद्यतु आपूर्त ष स े संबंभधत उपाय) भिभनयमन, 2023 के अंतगतष भनयुक्त सहायक
प्रबंधक, िायुसंचार अभधकारी, सरु िा अभधकारी, इंजीभनयर, खनन पयषिेिक, सहायक खनन पयषिेिक,
ब्लास्टर, यांभत्रक पयषिेिक, सिेिक, भिद्युत सुरिा अभधकारी और भिद्युत पयषिेिक शाभमल ह;ैं
(कत) "ऑपरेटर" से तात्पयष ऐसे सिम व्यभक्त से ह ै जो ककसी भिभशष्ट मशीनरी के सुरभित संचालन के भलए
भजम्मेदार ह,ै भजसने भिभशष्ट व्यािसाभयक प्रभशिर् पूरा कर भलया ह ै और जो खान के प्रबंधक द्वारा
भलभखत रूप में अभधकृत या भनयुक्त ककया गया ह;ै
(कि) "अनुमत भिस्फोटक" से तात्पयष ऐसी फमष द्वारा भनर्मषत और ऐसे प्रकार के भिस्फोटक से ह ै भजसे मुख्य
भनरीिक-सह-सुभिधाकताष समय-समय पर सामान्य या भिशेर् आदेश द्वारा भनर्दषष्ट करे;
(कद) " पाइपलाइन" से तात्पयष ककसी खदान में पानी, संपीभड़त हिा, रेत िरने या रेत िरने के अलािा अन्य
सामिी िरने, नाइट्रोजन फ्लडशंग या ककसी अन्य उद्देश्य के भलए पंप करने या आपूर्तष करने के प्रयोजनािष
भबछाई गई या उपयोग की जा रही पाइपलाइन से ह;ै
(कध) "भपट टॉप अटेंिेंट" से तात्पय ष ऐसे व्यभक्त से ह ै भजसे व्यभक्तयों, औज़ारों और सामभियों को नीच े उतारन े
और ऊपर उठाने के काय ष का पयषिेिर् करन े और शाफ्ट या भिन्ज़ के शीर्ष पर संकेतों को प्रेभर्त करने के
भलए भनयुक्त ककया गया ह;ै
(कन) "प्रधान अभधकारी" का तात्पयष खदान में ड्यूटी पर तैनात खनन अनुशासन में िररष्ठतम खान अभधकारी स े
ह;ै8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(कप) "सािषजभनक सड़क" से तात्पयष ऐसी सड़क से ह ै जो सािजष भनक उपयोग के भलए अनरु भित की जाती ह ै
और ककसी सरकार या स्िानीय प्राभधकरर् के अभधकार ित्रे के अंतगषत आती ह;ै
(कफ) "भतमाही" से 31 माच,ष 30 जून , 30 भसतम्बर तिा 31 कदसम्बर को समाप्त होने िाली तीन महीने की
अिभध अभिप्रेत ह ै ;
(कब) "शरर् कि" से तात्पय ष िूभमगत खदान के अंदर एक आपातकालीन आश्रय से ह ै जो एक सुरभित, सीलबंद
िातािरर् प्रदान करता ह ै जहां खभनक शरर् ले सकते ह ैं यकद आग, भिस्फोट, छत भगरने, जहरीली गैसों
या बाढ जैसी आपात भस्िभत के कारर् सतह पर िागना सिं ि न हो।
(कि) "िेत्रीय भनरीिक-सह-सुभिधाकताष" से तात्पयष खानों के भनरीिक-सह-सुभिधाकताष से ह,ै भजसका उस
िौगोभलक िेत्र पर अभधकार िेत्र ह ै भजसमें खदान भस्ित ह ै और भजसके भलए िह संभहता के तहत
अपनी शभक्तयों का प्रयोग करता ह;ै
(कम) "बचाि किर" से तात्पयष व्यिसाभयक सुरिा स्िास््य एिं कायष शतें (केन्द्रीय) भनयम 2025 के भनयम
136 के अंतगषत प्रािधाभनत स्टैंिबाय टीम के साि पूरी तरह ससु भित फ्रेश एयर बेस के प्रािधान से ह;ै
(कय) "जोभखम" से तात्पयष ककसी भिभशष्ट अिांभछत घटना की संिािना और उसके संिाभित पररर्ामों के
संयोजन से ह;ै
(कर) "नदी" से तात्पयष ककसी िी जलधारा या धारा से ह,ै चाह े िह मौसमी हो या बारहमासी, और इसम ें
उच्चतम ज्ञात बाढ स्तर तक फैले उसके ककनारे शाभमल ह;ैं
(कल) "सड़क मागष" से तात्पयष ककसी िूभमगत मागष, िाइििे या उसके िाग से ह ै भजसे ककसी खदान के संचालन
के सम्बन्ध में अनुरभित ककया जाता ह;ै
(कि) "अनुसूची" से इन भिभनयमों के साि संलि अनुसचू ी अभिप्रेत ह;ै
(कश) "शाफ्ट" से तात्पयष एक ऊध्िाषधर या झुका हुआ रास्ता या उद्घाटन स े ह ै जो सतह से िूभमगत कायों तक
या िूभमगत कायों के एक िाग से दसू रे िाग तक जाता ह ै और इसमें ढलान िी शाभमल ह;ै
(कर्) "शॉट-होल" से अभिप्राय खदान में जमीन को तोड़ने के भलए भिस्फोटक से चाजष करने के बाद दागे जाने के
उद्देश्य से भिल ककया गया छेद ह;ै
(कस) "भसिलमैन" से तात्पयष भसिल प्रसाररत करन े के भलए भनयुक्त व्यभक्त से ह;ै
(कह) "सॉकेट" स े तात्पयष शॉट-होल या ब्लास्ट होल या उसका कोई िाग से ह ै जो भिस्फोटक स े चाज ष होने तिा
भिस्फोट होने के पिात बच जाता ह ै और भजसके बारे में ज्ञात नहीं ह ै कक िह भमसफायर होल ह;ै
(कि) "मानक संचालन प्रकक्रया (एसओपी)" से तात्पयष काम करने का एक प्रलेभखत तरीका ह,ै भजसका उद्देश्य
जोभखम को समाप्त करना या न्यूनतम करना ह;ै[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 9
(कत्र) "आपूर्तषकताष" से तात्पयष ककसी व्यभक्त, व्यभक्तयों के संघ, कंपनी या संस्िा स े ह ै जो धातुयुक्त खानों म ें
उपयोग के भलए प्रौद्योभगकी, परामशष, मशीनरी, संयंत्र, उपकरर्, उपकरर् या पदािष सभहत ककसी
प्रौद्योभगकी की आपूर्तष करता ह;ै
(कज्ञ) "समिषन" से तात्पयष ककसी खदान में छत, ककनारों, फशष, हाईिॉल, बेंच या ढलान को बनाए रखने या
भनयंभत्रत करने के भलए प्रदत्त कोई िी प्राकृभतक या कृभत्रम साधन से ह,ै ताकक जमीन को भगरने से रोका
जा सके और कामकाज की सुरिा और भस्िरता सुभनभित की जा सके, और इसमें सहारे, चॉक, छत के
बोल्ट, शॉटक्रीट, प्रबभलत कंक्रीट, भचनाई, पैकिॉल, लाइनर या िभू म भनयंत्रर् की कोई अन्य अनुमोकदत
प्रर्ाली शाभमल ह;ै
(ककक) "टब" में िैगन, कार, ट्रक या सामिी ढोने के भलए रेल पर चलने िाला कोई अन्य िाहन शाभमल ह,ै
लेककन इसमें रेलि े िैगन शाभमल नहीं ह;ै
(ककख) "िूभमगत मोबाइल मशीनरी" से तात्पयष िूभमगत खदान में चट्टान तोड़ने, भिडलंग, बोटरंग, भिस्फोटकों
के पररिहन और/या चार्जगिं , स्केडलंग, बोडल्टंग, शॉट-क्रेटटंग, सामिी हिैं डलंग, लोडिंग, िेडिंग,
कॉम्पैडक्टंग, कटटंग, पानी भछड़कने या मनुष्यों, सामभियों, खभनजों, ईंधन या अपभशष्ट के पररिहन के
भलए उपयोग की जाने िाली स्िचाभलत मशीनरी से है, भजसमें मोबाइल मशीनरी या ककसी अन्य
नाम से ज्ञात मशीनरी शाभमल है;
(ककग) “िरें टलेशन भिभस्ट्रक्ट (संिातन भिभस्ट्रक्ट)” से तात्पयष खदान के िूभमगत िाग से ह ै भजसमें एक मुख्य
अंतिाषही िायुमागष से शुरू होन े िाला एक स्ितंत्र अतं िाषही िायुमागष और एक मुख्य िापसी िायुमाग ष
पर समाप्त होने िाला एक स्ितंत्र िापसी िायुमागष होता ह,ै और यकद कोई खदान या उसका िाग
प्राकृभतक साधनों द्वारा हिादार होता ह,ै तो पूरी खदान या उसका िाग।
(ककघ) "िाइंडिंग-इंजन ऑपरेटर" से तात्पयष ऐसे व्यभक्त से ह ै जो इस प्रयोजन के भलए इस भिभनयमन के अंतगषत
जारी िाइंडिंग-इंजन ऑपरेटर के योग्यता प्रमार्पत्र का धारक ह;ै
(ककङ) "भिन्ज़" या "रेज़" से तात्पयष िूभमगत कायष में एक छोटा शाफ्ट, जो या तो ऊध्िाषधर या झुका हुआ हो;
(ककच) "कायष" से तात्पयष ककसी खदान में खभनजों की खोज या प्राभप्त के भलए ककया गया या ककया जा रहा कोई
उत्खनन ह;ै
(ककछ) "कायषस्िल" से खान में कोई ऐसा स्िान अभिप्रेत ह,ै जहां ककसी व्यभक्त की िैध पहुचं हो;
(2) इन भिभनयमों में प्रयुक्त ऐसे शब्द और अभिव्यभक्तयाँ, भजन्ह ें इसमें पररिाभर्त नहीं ककया गया ह,ै ककन्त ु
संभहता में पररिाभर्त ककया गया ह,ै उनके िही अिष होंगे, जो संभहता में उन्ह ें कदए गए ह।ैं10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय -II
परीिा और सिमता एि ं योग्य ता के प्रमार्-पत्र
3. खनन परीिा बोि.ष - (1) इन भिभनयमों के तहत एक खनन परीिा बोिष (भजसे इसमें इसके पश् चात् "बोिष"
कहा गया ह)ै का गठन ककया जाएगा।
(2) बोिष में भनम्नभलभखत शाभमल होंगे:
(i) मुख् य भनरीिक, जो उसका (पदेन) अध् यि होगा, और ,
(ii) पाँच ऐसे सदस्य ों, जो खनन इंजीभनयरी में भििी के साि भनम् नभलभखत में से कोई अहतष ा रखत े हों :-
(क) भिभनयम 4 के अधीन अनुदत् त प्रिम श्रेर्ी प्रबंधक सिमता प्रमार्-पत्र; या
(ख) धातु खान या उसके ककसी िाग के प्रबंधन, भनयंत्रर्, पयषिेिर् और भनदेशन में कम से कम बीस िर्ों का
व् यिहाररक अनिु ि; या
(ग) भििी या समतुल् य स्त र पर खनन इंजीभनयरी में भशिा देनेिाले ककसी संस्ि ान में कम दे कम 5 बोिष से
सेिारत हो; या
(घ) खनन अनुसंधान या योजना बनाने में पांच बोिष का अनुिि रखतें हो ,
परंतु बोिष इस प्रकार गरठत ककया जाएगा कक उसमें कम से कम तीन सदस्य खंि (क) और (ख) में दी
गई अहतष ाएँ रखते हों और कम से कम एक सदस्य खंि (ग) या खंि (घ) में दी गई अहषताएँ रखता हो; और
(iii) एक सदस्य भजसके पास भिद्युत अभियांभत्रकी की भििी हो और खानों में भबजली के प्रेर्र्, भितरर् और
उपयोग में कम से कम बीस िर्ों के कायष का अनुिि हो, धातु खानों में भिद्यतु प्रभतष्ठानों के संबंध म ें भिद्यतु
पयषिेिकों को कदए जान े िाल े प्रमार् पत्रों के मामल े में, और
(iv) भिद्युत अभधभनयम, 2003 के तहत पररिाभर्त मुख्य भिद्युत भनरीिक या कोई अन्य भिद्युत भनरीिक;
केंद्र सरकार द्वारा भनयुक्त होंग े I
(3) अध् यि के अलािा बोिष का प्रत् येक सदस्य भनयुभक्त की तारीख से तीन िर् ष तक, या जब तक उसके
उत् तराभधकारी की भनयुभक्त नहीं हो जाती, दोनों में स े जो िी बाद में हो, पदधारर् करेगा:
परन् तु,-
(i) कोई सदस्य ककसी िी समय अध् यि को भलभखत सूचना दके र अपने पद से त् याग-पत्र दे सकेगा;
(ii) उप-भिभनयम (2) के खंि (ग) के अधीन भनयुक् त कोई सदस्य उस खंि में यिा भिभनर्दषष् ट ककसी
ऐसी संस्ि ा या संगठन से अभधिर्र्षता या सेिा छोड़न े के पश् चात् अपने पद पर नहीं रहगे ा;
(iii) िह व् यभक्त जो ककसी ऐसी ररभक्त को िरन े के भलए, जो ककसी सदस्य की मृत् यु या त् याग-पत्र से
या अभधिर्र्षता स े या उप-खण्ि (ii) के अधीन ककसी सदस्य की पद समाभप्त के कारर् हुई ह,ै भनयुक् त हुआ हो,
उस अिभशष्ट अिभध तक ही पद पर बना रहगे ा जब तक कक िह सदस्य ऐसे ककसी कारर् के न होने पर सदस्य
बना रहता।
(4) कोई ऐसा व् यभक्त जो बोिष के सदस्य के रूप में पद धारर् करता ह ै या कर चकु ा ह,ै इस भिभनयम के अन् य
प्रािधानों के अधीन रहत े हुए, उस पद पर पुनर्नषयुभक्त का आधान होगा;
(5) अध् यि के अलािा बोिष के सदस्य उतना पाररश्रभमक पाएँगे जो केंद्रीय सरकार भनधाषररत करे;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 11
(6) मुख् य भनरीिक द्वारा नाभमत एक भनरीिक बोिष के सभचि के रूप में कायष करेगा (भजसे इसके पश् चात् इन
भिभनयमों में सभचि कहा गया ह)ै ;
(7) इस भिभनयम में ककसी बात के होते हुए िी केंद्रीय सरकार यकद इस बात से सतं ष्ु ट हो कक लोकभहत में ऐसा
करना जरूरी ह,ै तो िह ककसी िी सदस्य या सदस्य ों का कायषकाल पूरा न होन े पर िी बोिष का पुनगषठन कर
सकती ह।ै
(8) अध् यि जैसा और जब िी आिश् यक समझे बोिष की बैठक की जाएगी, और जब तक अध् यि द्वारा अन् यिा
भनर्षय नहीं भलया जाता, बोिष की सिी बैठकें अध्यि के अनुमोदन से तय ककया गया स्िान में होंगी।
(9) (क) बोिष के प्रत् येक बैठक के भलए, बैठक से कम से कम दस कदन पहले िारत म ें मौजूद प्रत् येक सदस्य को
अध् यि या सभचि के हस्त ािर से प्रस् ताभित बैठक के समय और स् िान की सूचना पर दी जाएगी।
(ख) ऐसी सचू ना सदस्य के सामान् य भनिास स्ि ान पर दी जाएगी या ईमेल द्वारा िेजी जाएगी, तिा ऐसी
प्रत् येक सूचना के साि बैठक में भिचार होने िाली भिर्यों की सूची िी दी जाएगी।
(ग) खंि (क) और (ख) में कही गई बातों के होत े हुए िी अत् यन् त जरूरी होन े पर, अध् यि द्वारा ककसी िी समय
सिी सदस्य ों को ऐसी बैठक की तारीख एि ं समय और उस बैठक म ें चचा ष की जान े िाली भिर्यों की दो कदनों
की अभिम सूचना देकर आकभस्मक बैठक बुलायी जा सकती ह।ै
(10) (क) अध् यि बोिष की प्रत् येक बैठक की अध् यिता करेगा।
(ख) यकद ककसी कारर्िश अध् यि अनुपभस्ित हो, तो उपभस्ित सदस्य उनम ें स े ही ककसी एक को बैठक की
अध् यिता करने के भलए भनिाषभचत करेंगे; तिा ऐस े भनिाषभचत सदस्य को उस बैठक के भलए अध् यि की सिी
शभक्तयाँ होंगी।
(11) बोिष के ककसी बैठक में अध् यि सभहत जब तक कम से कम तीन सदस्य शारीररक रूप से या िीभियो
कॉन्फ्रेंडसंग या दोनों के माध्यम से मौजूद न हों, तब तक कोई िी कायषक्रम सम् पाकदत नहीं ककया जाएगा :
परन् तु यकद ककसी बैठक में उपरोक्त कोरम न हो, तो बैठक स् ित: सात कदन के बाद की तारीख के भलए,
या उस कदन कोई सािषजभनक अिकाश हो तो उसके अगले कायष कदिस के भलए स्ि भगत हो जाएगी और स्ि भगत
बैठक के भलए समय, स्ि ान और कायसष ूची अपररिर्तषत रहगे ी, और तत् पश् चात्, ऐस े बैठक में उपभस्ित सदस्य ों
की संख् या का भलहाज ककए भबना, कायषक्रमों का भनपटारा करना भिभधमान् य होगा।
(12) (क) ऐसे सिी भिर्य भजन पर बोिष द्वारा भिचार ककया जाना ह,ै उन पर बोिष की बैठक म ें ही भिचार
ककया जाएगा, या यकद अध् यि तय करे तो प्रत् येक सदस्य, जो िारत स े अनुपभस्ित नहीं ह,ै के पास कागजात के
पररचालन द्वारा भिचार ककया जाएगा।
(ख) जब ककसी भिर्य पर खण्ि (क) के अधीन कागजात का पररचालन कर भिचार ककया जाता ह,ै तो कोई िी
सदस्य उस भिर्य को बोिष की बैठक में भिचार के भलए अनुरोध कर सकता ह,ै और अध् यि उस भिर्य को िैस े
ही भिचार हते ु भनदेश दे सकता ह,ै परन् तु जब दो या दो से अभधक सदस्य ऐसा अनुरोध करते ह ैं तो अध् यि
अिश् य ही अगले बैठक में उस भिर्य पर भिचार करने का भनदेश देगा।
(13) (क) सभचि, बोिष के सामने भिचार ककए जानेिाले भिर्यों की सूची प्रस् तुत करेगा।
(ख) जो भिर्य उस सूची के अन् तगषत नहीं ह ै उन पर अध् यि की अनुमभत के भबना भिचार नहीं ककया जाएगा।
(14) (क) बैठक में प्रत् येक भिर्य का भनर्षय बैठक में उपभस्ित सदस्य ों के बहुमत स े ककया जाएगा।
(ख) जब तक अध् यि उप-भिभनयम (12) के अधीन सदस्य ों को पररचालन भिभनर्दषष् ट भिर्य को भनयभमत रूप
से होनेिाली बैठक में भिचार के भलए सुरभित न रख दे, प्रत् येक ऐसे भिर्य पर भनर्षय उन सदस्य ों के बहुमत स े
ककया जाएगा भजन् ह ें कागजात पररचाभलत ककए गए िे।
(ग) सदस्य ों के समान मत भििाजन की भस्िभत में अध्य ि को एक भनर्ाषयक मत देने का अभधकार होगा।
(15) (क) सभचि प्रत् येक बैठक की कायषिृत् त को इस प्रयोजन के भलए रखे भजल् दबि पृष्ठ संख् यांककत पुभस्तका में
पुनः प्राप्त करने योग्य और गरै संपादन योग्य इलेक्ट्रॉभनक प्रारूप में
दजष करेगा और ऐसे कायषिृत्त की प्रभतभलभपयाँ िारत में उपभस्ित सिी सदस्य ों के पास िेजी जाएँगी।12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) इस प्रकार दज ष कायषित्ृ त की पुभष्ट बोिष की अगली बैठक में की जाएगी और अध् यि द्वारा उसके प्रमार्
स्ि रूप हस्त ािर ककया जाएगा।
(16) (क) अध्य ि इन भिभनयमों के अधीन उसे अनुदत् त अन् य शभक्तयों और कत् तषव् यों के अभतररक् त,-
(i) यिाशीघ्र सिी महत् िपर्ू ष कागजात और मामले बोिष के सामन े भनिेकदत करेगा;
(ii) बोिष के भनर्षयों को कायाषभन्ित करने के भलए आदेश जारी करेगा;
(iii) को ककसी िी भिर्य को, अपने भििेकानुसार, केंद्रीय सरकार को उसके आदेश के भलए िेजने का
अभधकार होगा; और
(iv) को बोिष के भनर्षयों को कक्रयाभन्ित करन े के भलए अपेभित ऐसी कारषिाई करन े या ऐसे आदेश पाररत
करने का अभधकार होगा।
(ख) छुट्टी में जाने या अन् यिा ककसी कारर्िश अस्ि ाई रूप से अनुपभस्ित रहने के दौरान अध् यि बोिष के ककसी
िी सदस्य को ऐसी अनुपभस्िभत के दौरान अध् यि के सिी या कोई कतषव् यों के पालन हते ु प्राभधकृत कर सकता
ह।ै
(ग) जब तक अध् यि अन् यिा अनुदेश न दे, बोिष की सिी कायषिाभहयाँ बन् द बैठक में होगी तिा उसे गोपनीय
रखा जाएगा।
4. बोि ष द्वारा अनदु त्त प्रमार्-पत्र.–
(1) उप-भिभनयम (2) में भिभनर्दषष् ट प्रमार्-पत्र बोिष द्वारा अनुदत् त ककए जाएँगे।
(2) बोिष द्वारा अनुदत् त प्रमार्-पत्र उन सिी राज् यिेत्रों में, भजन पर इन भिभनयमों का भिस्त ार ह,ै भिभधमान् य
होंगे और भनम्न भलभखत प्रकार के होगें, अिाषत् -
(क) धात ु खान के प्रबंध करन े के भलए प्रबंधक का प्रिम श्रेर्ी सिमता प्रमार्-पत्र (भजसे इन भिभनयमों में
प्रिम श्रेर्ी प्रबंधक का प्रमार्-पत्र भनर्दषष् ट ककया गया ह)ै ;
(ख) धातु खान के प्रबंध करने के भलए प्रबंधक का भद्वतीय श्रेर्ी सिमता प्रमार्-पत्र (भजसे इन भिभनयमों में
भद्वतीय श्रेर्ी प्रबंधक का प्रमार्-पत्र भनर्दषष् ट ककया गया ह)ै ;
(ग) खान की खनन स्ि लों के सिेिर् करने के भलए सिेिक का सिमता प्रमार्-पत्र (भजसे इन भिभनयमों में
सिेिक का प्रमार्-पत्र भनर्दषष् ट ककया गया ह)ै ;
(घ) इन भिभनयमों के अधीन यिा अपेभित भनरीिर् और कतषव् यों के भनिाहष करन े हते ु खनन पयषिेिक सिमता
प्रमार् पत्र (भजसे इन भिभनयमों में खनन पयषिेिक का प्रमार्-पत्र भनर्दषष् ट ककया गया ह)ै ;
(ि.) इन भिभनयमों के अधीन यिा अपेभित भनरीिर् और कतषव् यों के भनिाषह हते ु सहायक खनन पयषिेिक
सिमता प्रमार्-पत्र (भजसे इन भिभनयमों सहायक खनन पयषिेिक का प्रमार्-पत्र भनर्दषष्ट ककया गया ह)ै ;
(च) ककसी िी प्रकार या िगष के िाइडन्िंग इंजन को चलाने के भलए िाइंडिंग इंजन ऑपरेटर का प्रमार् पत्र
(भजसे पहले इंजन िाइिर का प्रमार् पत्र कहा जाता िा)।
(छ) केंद्रीय भिद्युत प्राभधकरर् (सुरिा और भिद्युत आपूर्तष संबंधी उपाय) भिभनयम, 2023 के तहत आिश्यक
खनन प्रभतष्ठानों के पयषिेिर्, भनरीिर् और कतव्यष ों को पूरा करने के भलए भिद्यतु पयषिेिक सिमता प्रमार् पत्र
(भजसे आगे खनन प्रभतष्ठानों को किर करन े िाला भिद्यतु पयषिेिक प्रमार् पत्र भनर्दषष् ट ककया गया ह)ै :
(ज) धाभत्िक खान में गोल े दागने के भलए ब्लास्टर का सिमता प्रमार्-पत्र (भजसे इन भिभनयमों में ब्लास्टर
प्रमार्-पत्र भनर्दषष् ट ककया गया ह)ै
परंतु यह कक इन भिभनयमों के लागू होन े के बाद,-
(i) धातु खान भिभनयम, 1961 के भिभनयम 12 के तहत जारी ककया गया प्रिम या भद्वतीय श्रेर्ी का इंजन
चालक प्रमार्पत्र, इस भिभनयम के तहत िाइंडिंग इंजन ऑपरेटर प्रमार्पत्र के रूप में िी जारी ककया गया
माना जाएगा; और[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 13
(ii) धातु खान भिभनयम, 1961 के भिभनयम 12 के तहत जारी ककया गया खान फोरमैन का योग्यता प्रमार्पत्र
और खनन सहायक का योग्यता प्रमार्पत्र, इस भिभनयम के तहत क्रमशः खनन पयषिेिक का योग्यता प्रमार्पत्र
और सहायक खनन पयषिेिक का योग्यता प्रमार्पत्र के रूप में िी जारी ककया गया माना जाएगा:
परंतु यह कक िाइंडिंग इंजन ऑपरेटर प्रमार् पत्र और खनन प्रभतष्ठानों को किर करन े िाले भिद्यतु पयषिेिक
प्रमार्पत्र को छोड़कर, उपरोक्त प्रमार्पत्रों में स े कोई िी प्रमार्पत्र केिल ओपनकास्ट खानों तक ही सीभमत हो
सकता ह,ै और इस त्य को प्रमार्पत्र पर अंककत ककया जाएगा।
परंतु यह और कक, खनन पयषिेिक का प्रमार् पत्र और सहायक खनन पयषिेिक का प्रमार् पत्र केिल उन खानों
तक सीभमत हो सकता ह ै भजनमें भिस्फोट ककए भबना खुली खदानों में खनन कायष होता ह,ै और इस त्य को
प्रमार् पत्र पर अंककत ककया जाएगा I
5. परीिाए ँ और परीिक.– (1) अभ् यर्िषयों को प्रमार्-पत्र ऐसी परीिा के बाद और ऐसे प्रपत्र में जो बोिष
भिभनर्दषष् ट करे, अनुदत् त ककए जाएँगे:
परन् तु परीिा उपभिभध (बाई-लॉ) में भिभनर्दषष् ट शतों के अधीन ककसी िी व् यभक्त को भिभनयम 4 में
भनर्दषष् ट प्रमार्-पत्र अनुदत् त करने के भलए परीिा या उसके ककसी िाग से छूट दे सकता ह।ै
(2) एक िर्ष में परीिायें ऐसे अंतराल पर और ऐसे केंद्रों, जो बोिष द्वारा भनधाषररत की जा सकती ह,ै पर बोि ष
द्वारा भनयुक्त परीिकों द्वारा आयोभजत की जाएगी,
(3) उप-भिभनयम (2) में भनर्दषष् ट परीिक परीिाओं के संचालन संबंधी समस्त मामलों में बोिष के आदेशों के
अधीन होंगे और ऐसा पाररश्रभमक पाएँगे जो बोिष, केंद्रीय सरकार की मंजरू ी स,े भनधाषररत करे।
(4) बोिष प रीिाओं की प्रकक्रया और उनके संचालन के भलए मानक संचालन प्रकक्रया और इन भिभनयमों द्वारा
अपेभित सिमता और स्ि स्ि ता (कफटनेस) प्रमार्-पत्रों के अनुदत् त ककए जाने के बारे में परीिा उपभिभधयाँ बना
सकेगा, और यिासाध् य, यह उपबंध करेगा कक ककसी भिशेर् िगष के प्रमार्-पत्रों के अनुदत् त के भलए अपेभित
ज्ञान का स्त र और भचककत् सीय स्ि स्ि ता का स्त र उन सिी राज् यिेत्रों में, भजन पर इन भिभनयमों का भिस्त ार ह,ै
एक समान होंगे:
परन् तु बोिष ऐसे ककसी भिर्य पर, जो परीिा उप-भिभधयों में भिभनर्दषष् ट नहीं ह ै और उसके समि
भनिारर् के भलए लाया जाता ह,ै भनर्षय ले सकता ह।ै
6. आिदे न जमा करना.– (1) बोिष द्वारा संचाभलत ककसी परीिा के भलए आिेदन परीिा के भलए भनधाषररत
तारीख स े कम से कम साठ कदन पूिष और इस प्रयोजन के भलए भिभनर्दषष् ट प्रपत्र में बोिष को कदए जाएँगे।
(2) सिी परीिाओं की तारीख और स्ि ान के संबंध में सचू ना बोिष के आदेशाधीन ऐसे साधन द्वारा जैसा बोि ष
भनर्दषष् ट करे, आिेदन प्राप्त करने के भलए बोिष द्वारा भनयत तारीख से कम से कम नब्बे कदन पहले प्रकाभशत की
जाएगी:
परंतु भिशेर् पररभस्िभतयों में बोिष उपयुषक्त अिभध से भिन्न ककसी अन्य अिभध की सूचना भिभनर्दषष्ट कर सकता ह।ै
7. अभ्य र्ियष ों की आय ु सीमा और सामान्य अहतष ाए.ँ – (1) ककसी िी व् यभक्त को बोिष द्वारा आयोभजत ककसी
परीिा के भलए अभ् यिी के रूप में प्रभिष्ट नहीं ककया जाएगा, जब तक िह बीस िर्ष की आयु का न हो और 65
िर्ष से अभधक न हो I
(2) यिापूिोक् त ककसी िी परीिा के भलए प्रत् येक आिेदन के साि भनम् नभलभखत संलग्न ककए जाएँगे :
(i) इस प्रयोजन हते ु नगरपाभलका प्राभधकरर् या जन्म और मृत्यु रभजस्ट्रार का कायाषलय या एक उपयुक्त सरकार
द्वारा गरठत एक मेभिकल बोिष द्वारा जारी जन्म प्रमार् पत्र:
परंतु यह कक, मैरट्रकुलेशन या समतुल् य प्रमार्-पत्र धारक व् यभक्त की दशा में ऐसे प्रमार्-पत्र को आय ु के साक्ष् य के
रूप में कदया जाएगा;14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ii) आिेदन की तारीख के पूर्िषक एक िर्ष से अनभधक काल का ककसी अर्हतष भचककत्स क से, जो भसभिल सहायक
सजषन के दज ें स े नीच े का न हो, या ककसी प्रमार्कता ष सजषन से या ककसी ऐस े भचककत् सक से, जो कम स े कम
और्ध और शल् य भचककत् सा की बैचलर की भििी धारर् करता हो तिा राष्ट्रीय भचककत्सा आयोग (पूिषतः
िारतीय भचककत्र्ा पररर्द)् से पंजीकृत हो, अभिप्राप्त स्ि ास्् य प्रमार्-पत्र, जो अभ् यिी को बहरापन, िर्ष दभृ ष्ट
दोर् या ककसी अन् य ऐसे मानभसक या शारीररक दौबषल्य से, भजससे उसके कायष की दिता में हस्त िेप संिाव् य
हो, मुक् त होना प्रमाभर्त करता हो; और
(3) प्रबंधक प्रमार् पत्र, सििे क प्रमार् पत्र, खनन पयषिेिक प्रमार् पत्र, सहायक खनन पयषिेिक प्रमार् पत्र,
िाइंडिंग इंजन ऑपरेटर प्रमार् पत्र या खनन प्रभतष्ठानों से संबंभधत भिद्युत पयषिेिक प्रमार् पत्र के भलए ककसी
िी परीिा में ककसी व्यभक्त को उम्मीदिार के रूप में प्रिेश नहीं कदया जाएगा, जब तक कक उसने ककसी मान्यता
प्राप्त बोिष या भिश्वभिद्यालय से कम से कम िररष्ठ माध्यभमक भिद्यालय परीिा या मध्यिती परीिा या उसके
समकि परीिा उत्तीर्ष न कर ली हो; और
(4) (क) प्रिम श्रेर्ी प्रबंधक प्रमार् पत्र, भद्वतीय श्रेर्ी प्रबंधक प्रमार् पत्र और खनन पयषिेिक प्रमार् पत्र
परीिा के भलए ककसी िी व्यभक्त को उम्मीदिार के रूप में प्रिेश नहीं कदया जाएगा, जब तक कक उसने क्रमशः
भद्वतीय श्रेर्ी प्रबंधक प्रमार् पत्र, खनन पयिष िे क प्रमार् पत्र और सहायक खनन पयिष िे क प्रमार् पत्र प्राप्त न
कर भलया हो।
(ख) प्रिम श्रेर्ी प्रबंधक प्रमार् पत्र, भद्वतीय श्रेर्ी प्रबंधक प्रमार् पत्र और खनन पयिष िे क प्रमार् पत्र (केिल
खुली खदानों के भलए ही सीभमत) की परीिा के भलए ककसी िी व्यभक्त को उम्मीदिार के रूप में प्रिेश नहीं कदया
जाएगा, जब तक कक उसन े क्रमशः भद्वतीय श्रेर्ी प्रबंधक प्रमार् पत्र (भजसमें केिल खुली खदानों के भलए मान्य
प्रमार् पत्र िी शाभमल ह)ै , खनन पयषिेिक प्रमार् पत्र (भजसमें केिल खुली खदानों के भलए मान्य प्रमार् पत्र िी
शाभमल ह)ै और सहायक खनन पयषिेिक प्रमार् पत्र (भजसमें केिल खुली खदानों के भलए मान्य प्रमार् पत्र िी
शाभमल ह)ै प्राप्त न कर भलया हो:
परंतु बोिष, परीिा उपभनयमों में भनर्दषष्ट शतों के अधीन रहत े हुए ककसी िी व्यभक्त को उपरोक्त उप-भनयम के
प्रािधानों से छूट दे सकता ह;ै
परंतु और कक, इस खंि में ऐसा कुछ िी नहीं माना जाएगा भजससे इसके प्रािधानों को पूरा न करन े
िाले व्यभक्त को इन भिभनयमों के लागू होने की तारीख से तीन साल तक ककसी िी प्रमार् पत्र की परीिा म ें
प्रिेश से िंभचत ककया जा सके, यकद उसे उक्त प्रमार् पत्र की परीिा में पहले प्रिेश कदया गया हो।
8. प्रबधं क के प्रमार्-पत्र की परीिाओं के भलए अभ्य र्ियष ों का व्य िहाररक अनिु ि.-
(1) ककसी िी व्यभक्त को प्रिम श्रेर्ी प्रबंधक प्रमार् पत्र के भलए ककसी िी परीिा में उम्मीदिार के रूप में प्रिेश
नहीं कदया जाएगा, भसिाय उस भिभनमय प्रमार् पत्र के भजस पर भिभनयम 14 के प्रािधान लागू होते ह,ैं जब
तक कक बोिष इस बात स े सतं ुष्ट न हो जाए कक उसे अपने भद्वतीय श्रेर्ी प्रबंधक प्रमार् पत्र की प्रिािी भतभि के
बाद एक िर्ष की अिभध के भलए धातु खदान में व्यािहाररक अनुिि प्राप्त कर चुका ह।ै
(2) भिभनयम 14 के प्रािधानों के अंतगषत आन े िाले भिभनमय प्रमार् पत्र के अलािा ककसी अन्य भद्वतीय श्रेर्ी
प्रबंधक प्रमार् पत्र की परीिा में ककसी व्यभक्त को तब तक उम्मीदिार के रूप में प्रिेश नहीं कदया जाएगा, जब
तक कक बोिष इस बात से संतुष्ट न हो जाए कक उसन े खनन अभियांभत्रकी में भििी या केंद्र सरकार द्वारा
अनुमोकदत अन्य समकि योग्यता प्राप्त करने के बाद एक िर्ष की अिभध के भलए या उसके खनन पयषिेिक
प्रमार् पत्र की प्रिािी भतभि के बाद तीन िर्ष की अिभध के भलए धातु खदान म ें व्यािहाररक अनुिि प्राप्त
ककया हो।
परंतु उप-भिभनयम (1) और उप-भिभनयम (2) में कोई िी बात ऐसे व्यभक्त को, जो इन भिभनयमों के लागू होने
की भतभि से तीन िर्ष तक प्रिम या भद्वतीय श्रेर्ी प्रबंधक प्रमार् पत्र की परीिा में प्रिेश से िंभचत नहीं करेगी,
यकद उसे उक्त प्रमार् पत्र की परीिा में पहले प्रिेश कदया गया हो।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 15
(3) बोिष, उप-भिभध में भनधारष रत शतों के अधीन, प्रबंधक के प्रमार्-पत्र के भलए अपेभित व् यिहाररक अनुिि की
प्रकृभत एिं अन् य ब् यौरों को भिभनर्दषष् ट कर सकता ह।ै
9. सििे क के प्रमार्-पत्र की परीिाओं के भलए अभ्य र्ियष ों का अनिु ि.– कोई िी व्यभक्त सिेिक प्रमार् पत्र के
भलए ककसी िी परीिा में उम्मीदिार के रूप में उपभस्ित होने के योग्य नहीं होगा, भसिाय उस भिभनमय प्रमार्
पत्र के भजस पर भनयम 14 के प्रािधान लागू होते ह,ैं जब तक कक उसके पास परीिा उप-भिभध में भनधाषररत
शतों के अधीन बोिष द्वारा भनर्दषष्ट प्रकार के सिेिर् का कम से कम दो िर्ष का व्यािहाररक अनुिि न हो:
परन् तु, उक्त कालािभध को ऐसे अभ् यिी की दशा में घटाकर छह मास कर दी जाएगी, जो उस भनभमत
बोिष द्वारा परीिा उप-भिभध में भनधाषररत शतों के अधीन, अनुमोकदत ककसी शैभिक संस्ि ान म ें सैिाभन्तक और
व् यिहाररक सिेिर् की किाओं में उपभस्ित रहा हो।
10. खनन पयिष िे क प्रमार् पत्र परीिा के भलए उम्मीदिारों का व्यािहाररक अनिु ि (1) भिभनयम 14 के
प्रािधान लागू होने िाले भिभनमय प्रमार् पत्र के अलािा ककसी िी अन्य खनन पयिष िे क प्रमार् पत्र परीिा में
उम्मीदिार के रूप में उपभस्ित होन े के भलए कोई िी व्यभक्त तब तक पात्र नहीं होगा, जब तक कक उसके पास
खनन या खनन अभियांभत्रकी या खनन एिं खान सििे र् में भिप्लोमा या केंद्र सरकार द्वारा इस संबंध म ें
अनुमोकदत अन्य समकि योग्यता उत्तीर् ष करने के बाद एक िर् ष की अिभध के भलए धातु खान में व्यािहाररक
अनुिि न हो या उसके सहायक खनन पयषिेिक प्रमार् पत्र की प्रिािी भतभि के बाद एक िर्ष की अिभध के
भलए व्यािहाररक अनुिि न हो:
परंतु इस खंि में कोई िी बात ककसी ऐसे व्यभक्त को, जो इसके प्रािधानों को पूरा नहीं करता ह,ै इन भिभनयमों
के लागू होने की भतभि से तीन िर्ों तक खनन पयिष िे क प्रमार् पत्र की परीिा में प्रिेश से िंभचत नहीं करेगी,
यकद उसे उक्त प्रमार् पत्र की परीिा में पहले प्रिेश कदया गया हो।
(2) बोिष, परीिा उप-भिभध में भनधाषररत शतों के अधीन रहते हुए, खनन पयिष िे क प्रमार् पत्र के भलए आिश्यक
व्यािहाररक अनुिि की प्रकृभत और अन्य भििरर् भनर्दषष्ट कर सकता ह।ै
11. सहायक खनन पयिष िे क प्रमार् पत्र परीिा के भलए उम्मीदिार का व्यािहाररक अनिु ि - (1) कोई िी
व्यभक्त भिभनमय प्रमार् पत्र के अलािा, भजस पर भनयम 14 के प्रािधान लागू होते ह,ैं सहायक खनन पयषिेिक
प्रमार् पत्र के भलए ककसी िी परीिा म ें उम्मीदिार के रूप में उपभस्ित होने के भलए पात्र नहीं होगा, जब तक
कक बोिष द्वारा भनर्दषष्ट शतें पूरी न हों और उसे धातु खदान में कम से कम तीन िर्ष की व्यािहाररक अनुिि और
प्रभशिर् प्राप्त न हो:
परंतु ऐसे उम्मीदिार के मामले में यह अिभध एक िर्ष तक कम कर दी जाएगी, भजसने ककसी शैिभर्क संस्िान
में कम स े कम दो िर् ष के पाठ्यक्रम के बाद िैज्ञाभनक और खनन प्रभशिर् म ें भिप्लोमा या प्रमार् पत्र प्राप्त ककया
हो, या भजसने बोिष द्वारा परीिा उप-भिभध में भनधाषररत शतों के अधीन इस संबंध म ें अनुमोकदत भिश्वभिद्यालय
से िैज्ञाभनक और खनन भिर्य में भििी प्राप्त की हो,
(2) बोिष, परीिा उप-भिभध में भनधाषररत शतों के अधीन, सहायक खनन पयषिेिक प्रमार् पत्र परीिा के भलए
आिश्यक व्यािहाररक अनुिि की प्रकृभत और अन्य भििरर् भनर्दषष्ट कर सकता ह।ै
12. िाइंडिगं इंजन ऑपरेटर प्रमार्पत्र और खनन प्रभतष्ठानों को किर करन े िाल े भिद्यतु पयिष िे क प्रमार्पत्र के
भलए उम्मीदिार का व्यािहाररक अनिु ि:
(1) कोई िी व्यभक्त ककसी िी प्रकार या िगष के िाइंडिंग इंजन ऑपरेटर प्रमार्पत्र के भलए ककसी िी परीिा म ें
उम्मीदिार के रूप में उपभस्ित होने के भलए पात्र नहीं होगा, भसिाय उस भिभनमय प्रमार्पत्र के भजस पर
भिभनयम 14 के प्रािधान लागू होते ह,ैं जब तक कक उसे उसी प्रकार या िगष के िाइंडिंग इंजन ऑपरेटर के
सहायक के रूप में कम स े कम दो िर्ष की अिभध का व्यािहाररक अनिु ि न हो;16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
परंतु कोई उम्मीदिार-
(क) भजसन े राष्ट्रीय व्यािसाभयक प्रभशिर् पररर्द (एनसीिीटी) से राष्ट्रीय ट्रेि प्रमार् पत्र (एनटीसी) या राज्य
व्यािसाभयक प्रभशिर् पररर्द (एससीिीटी) से राज्य ट्रेि प्रमार् पत्र (एसटीसी) प्राप्त ककया हो, कफटर या
मैकेभनक ट्रेिों में दो िर्ष की अिभध के प्रभशिर् के बाद या खनन परीिा बोिष द्वारा मान्यता प्राप्त ककसी अन्य
समकि योग्यता के भलए, ऐसे अनुिि की अिभध िेढ िर् ष तक कम कर दी जाएगी;
(ख) यकद ककसी मान्यता प्राप्त बोिष/भिश्वभिद्यालय से मैकेभनकल इंजीभनयटरंग/इलेभक्ट्रकल
इंजीभनयटरंग/इलेभक्ट्रकल एिं इलेक्ट्रॉभनक्स इंजीभनयटरंग में भिप्लोमा प्राप्त ककया ह,ै तो ऐसे मामले म ें
अनुिि की अिभध घटाकर एक िर्ष कर दी जाएगी।
(ग) यकद ककसी मान्यता प्राप्त बोिष/भिश्वभिद्यालय से मैकेभनकल इंजीभनयटरंग/इलेभक्ट्रकल
इंजीभनयटरंग/इलेभक्ट्रकल एि ं इलेक्ट्रॉभनक्स इंजीभनयटरंग में भििी प्राप्त की ह,ै तो ऐसे मामले में अनुिि की
अिभध घटाकर छह माह कर दी जाएगी I
परंतु, इस उप-भिभनयम में सदं र्िषत अनुिि संबंभधत शैिभर्क योग्यता प्राप्त करन े के बाद प्राप्त अनुिि
होगा।
(2) खनन प्रभतष्ठानों से संबंभधत भिद्युत पयषिेिक प्रमार् पत्र के भलए ककसी िी परीिा में ककसी िी व्यभक्त को
उम्मीदिार के रूप में प्रिेश नहीं कदया जाएगा, जब तक कक बोिष द्वारा भनर्दषष्ट शतें परू ी न हों और उप-भिभनयम
(3) के तहत भनधाषररत खनन प्रभतष्ठान में भबजली के प्रेर्र् और भितरर् में कम से कम तीन िर्ष का व्यािहाररक
अनुिि न हो:
(3) कम से कम तीन िर्ष की अिभध के भलए:
परंतु यह कक कोई उम्मीदिार-
(क) भजसन े राष्ट्रीय व्यािसाभयक प्रभशिर् पररर्द (एनसीिीटी) से राष्ट्रीय ट्रेि प्रमार् पत्र (एनटीसी) या राज्य
व्यािसाभयक प्रभशिर् पररर्द (एससीिीटी) से राज्य ट्रेि प्रमार् पत्र (एसटीसी) भिद्युत ट्रेि में दो िर्ष की
अिभध के प्रभशिर् के बाद या खनन परीिा बोिष द्वारा मान्यता प्राप्त ककसी अन्य समकि योग्यता प्राप्त की हो,
तो ऐसे अनुिि की अिभध घटाकर दो िर्ष कर दी जाएगी।
(ख) भजसने भिद्युत या भिद्यतु एिं इलेक्ट्रॉभनक्स या भिद्युत एि ं उपकरर् में भिप्लोमा या केंद्र सरकार द्वारा
अनुमोकदत कोई अन्य समकि योग्यता प्राप्त की हो, तो ऐसे अनुिि की अिभध घटाकर एक िर् ष कर दी जाएगी;
(ग) भजसने भिद्यतु या भिद्युत एिं इलेक्ट्रॉभनक्स या भिद्युत एिं उपकरर् में भििी या केंद्र सरकार द्वारा
अनुमोकदत कोई अन्य समकि योग्यता प्राप्त की हो, तो ऐसे अनुिि की अिभध घटाकर छह माह कर दी
जाएगी।
परंतु यह कक, इस उप-भिभनयम में संदर्िषत अनुिि, संबंभधत शैिभर्क योग्यता प्राप्त करने के बाद प्राप्त अनुिि
होगा।
(3) बोिष, परीिा उपभनयमों में भनधाषररत शतों के अधीन रहत े हुए, िाइंडिंग इंजन ऑपरेटर प्रमार्पत्र और
भिद्युत पयषिेिक प्रमार्पत्र के भलए आिश्यक व्यािहाररक अनुिि की प्रकृभत और अन्य भििरर् भनर्दषष्ट कर
सकता ह।ै
13. प्रमार्-पत्र अनदु त्त करन े के भलए शल्ु क .– (1) प्रमार्-पत्र अनुदत् त करन े हते ु प्रत् येक आिेदन के बाित
िुगतान ककया जान े िाला शुल् क बोिष द्वारा उप-भिभध में भनधाषररत शतों के अधीन भनयत ककया जाएगा।
14. भिभनमय प्रमार्-पत्र (एक्सचजें सर्े टषकफकेट) – (1) बोिष ककसी ऐसे व् यभक्त को जो यिाभस्िभत खानों के
भिभनयम के भलए ककसी अन् य देश में लागू भिभध या व्यािसाभयक सुरिा, स्िास््य और काय ष दशाएँ (धातु खान )
भिभनयम, 2026 के अधीन प्रबंधक प्रमार्-पत्र ,सिेिक प्रमार् पत्र, िाइंडिंग इंजन ऑपरेटर प्रमार्पत्र, खनन
पयषिेिक प्रमार्पत्र या सहायक खनन पयषिेिक प्रमार्पत्र धारक व्यभक्त को व्यािसाभयक सुरिा, स्िास््य और
कायष दशाएँ (धातु खान) भिभनयम, 2026 के अधीन सदश्ृ य िगष का तदनुरूप प्रमार्-पत्र अनुदत् त कर सकता ह,ै
यकद िह ऐसी अहतष ा एिं अनुिि रखता ह ै और उसन े ऐसी परीिा उत् तीर्ष कर भलया ह,ै जो बोिष, परीिा उप-
भिभध में भनधाषररत शतों के अधीन भनयत करे।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 17
परन् तु बोिष, परीिा उप-भिभध में भनधाषररत शतों के अधीन ककसी व् यभक्त को भिभनमय प्रमार्-पत्र
अनुदत् त करने के भलए होने िाली परीिा या उसके ककसी िाग में सभम्मभलत होन े से छूट दे सकता ह।ै
(2) उप-भनयम (1) के अधीन भिभनमय प्रमार्पत्र प्रदान करन े हते ु प्रत्येक आिेदन के साि आिेदन की भतभि स े
एक िर्ष पूिष प्राप्त भचककत्सा प्रमार् पत्र संलि होना चाभहए, जो कम से कम स्नातक भचककत्सा एिं शल्य
भचककत्सा स्नातक (एम.बी.बी.एस.) की भििी धारक और राष्ट्रीय भचककत्सा आयोग में पंजीकृत ककसी योग्य
भचककत्सक द्वारा जारी ककया गया हो और भजसम ें प्रमाभर्त हो कक उम्मीदिार बहरेपन, दभृ ष्ट दोर् (रंग दभृ ष्ट दोर्
सभहत) या ककसी अन्य मानभसक या शारीररक दबु षलता स े मुक्त ह,ै भजससे उसके कायष की दिता में बाधा उत्पन्न
हो सकती ह;ै और
परंतु प्रबंधक प्रमार्पत्र के मामले में उम्मीदिार को िारत में खानों में कम से कम छह माह की अिभध का
व्यािहाररक प्रभशिर् प्राप्त होना चाभहए, जो बोि ष द्वारा परीिा उप-भिभध में भनधारष रत शतों के अधीन भनर्दषष्ट
तरीके से ककया गया हो।
(3) इस भिभनयम के अधीन प्रत् येक परीिा के भलए भिभनयम 13 में उभल्लभखत मान के अनुसार शुल् क का
िुगतान ककया जाएगा।
15. प्रमार्-पत्र की दसू री प्रभत.– यकद कोई व् यभक्त बोिष के द्वारा तय ककय े गए शतों के अधीन यह साभबत कर
देता ह ै कक इन भिभनयमों के अधीन अनुदत् त उसका प्रमार्-पत्र भबना उसकी गलती के खो गया ह,ै या िह उसस े
िंभचत कर कदया गया ह,ै तो बोिष भिभनयम 13 के उप-भिभनयम (1) के अधीन भनयत शुल् क की िसूली पर और
परीिा उपभनयमों में भिभनर्दषष् ट शतो के अधीन उसे प्रमार्-पत्र की प्रभतभलभप कदला सकता ह ै और ऐसी प्रत् येक
प्रभत पर आर-पार "दसू री प्रभत" शब्द ों में भनर्दषष्ट जाएगी।
16. प्रबधं क प्रमार् पत्र, सिये र प्रमार्पत्र , खनन पयिष िे क प्रमार्पत्र , सहायक खनन पयिष िे क प्रमार् पत्र ,
िाइंडिंग इंजन ऑपरेटर प्रमार् पत्र या गसै टेडस्टंग प्रमार् पत्र का भनलबं न या रद्द करना।
(1) यकद भनरीिक-सह-सभु िधाकता ष के ककसी प्रभतिेदन के आधार पर िेत्रीय भनरीिक-सह-सभु िधाकता ष की यह
राय हो कक प्रबंधक के प्रमार्-पत्र, सिेिक के प्रमार्-पत्र, खनन पयषिेिक प्रमार् पत्र, सहायक खनन पयषिेिक
प्रमार् पत्र, भिद्युत पयषिेिक प्रमार् पत्र, िाइंडिंग इंजन ऑपरेटर प्रमार् पत्र, गैस परीिर् प्रमार् पत्र का कोई
धारक सभं हता, या इन भिभनयमों के अधीन अपने कत्त षव् यों का पालन करने में अिम ह ै या लापरिाही या
कदाचार का दोर्ी ह,ै तो िह उस मामले को बोिष की जानकारी में लाएगा।
(2) उप-भनयम (1) के तहत भनरीिक-सह-सभु िधाकता ष की ररपोटष पर, बोिष इस भनयमन के प्रयोजन के भलए
बोिष द्वारा भनधाषररत प्रकक्रया के अनुसार जांच करेगा, यह भनधाषररत करने के भलए कक क्या ऐसा व्यभक्त (भजस े
दोर्ी कहा जाएगा) ऐसा प्रमार् पत्र धारर् करने के योग्य ह ै या नहीं:
परन् तु बोिष, जाँच शुरू होने के पहले, दोर्ी को मामले का भििरर्, भजस पर जाँच गरठत की गई ह,ै देगा।
(3) जांच करने िाला भनरीिक-सह-सभु िधाकता ष अपनी जांच समाप्त होने की भतभि से सात कदनों के िीतर अपने
भनष्कर्ों, जाचं के दौरान दजष ककए गए साक्ष्यों के नोट्स और अन्य प्रासंभगक अभिलेखों के साि बोिष को
इलेक्ट्रॉभनक रूप स े एक ररपोटष िेजेगा।
(4) जांच करने िाल े भनरीिक-सह-सुभिधाकता ष के साक्ष्य और भनष्कर्ों की प्रभतयां िी दोर्ी को
इलेक्ट्रॉभनक/पजं ीकृत िाक द्वारा िेजी जाएंगी, जो ररपोटष प्राप्त होने की भतभि स े पंद्रह कदनों के िीतर बोिष को
इलेक्ट्रॉभनक/पजं ीकृत िाक द्वारा अपना भलभखत अभ्यािेदन प्रस्तुत कर सकता ह।ै
(5) बोिष, दोर्ी द्वारा प्रस्तुत साक्ष्य और अन्य अभिलेखों तिा भलभखत अभ्यािेदन (यकद कोई हो) पर भिचार
करने के बाद मामले में आगे की जांच करिा सकता ह ै और उसके बाद या अन्यिा, दोर्ी को उसके भिरुि लगाए
गए आरोपों से बरी कर सकता ह ै या बोि ष द्वारा जारी कदशा-भनदशे के अधीन प्रमार् पत्र को भनलंभबत या रद्द
कर सकता ह।ै18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) इस भिभनयम के अंतगषत बोिष के ककसी िी आदेश के भिरुि केंद्र सरकार के समि ऐसे आदेश की भतभि स े
तीस कदनों के िीतर अपील की जा सकती ह।ै
(7) इस भिभनयम के अंतगषत ककसी प्रमार् पत्र को भनलंभबत या रद्द ककए जाने पर उसे सबं भं धत अभिलखे में दज ष
ककया जाएगा।
17. प्रबधं कों, अभधकाररयों आकद के भलए प्रमार् पत्र की िधै ता- (1) कोई िी व्यभक्त साठ (60) िर्ष की आयु
प्राप्त करन े के बाद ककसी खान में प्रबंधक, पदधारी या िाइंडिंग इंजन ऑपरेटर के रूप में काय ष नहीं करेगा, जब
तक कक उसन े भपछले एक िर्ष के िीतर, भनयम 7 के उप-भनयम 2 के खंि (ii) में भनर्दषष्ट योग्य भचककत्सा
व्यिसायी द्वारा जारी भचककत्सा प्रमार् पत्र प्राप्त न कर भलया हो, जो उसे सभं हता और उसके अधीन बनाए गए
भनयमों, भिभनयमों और आदशे ों में उसके भलए भनधाषररत कतषव्यों को पूरा करने के भलए योग्य प्रमाभर्त करता
हो:
परंतु यकद मुख्य भनरीिक-सह-सभु िधाकता ष या िेत्रीय भनरीिक-सह-सभु िधाकता ष की राय हो कक उपयुषक्त
व्यभक्त, यद्यभप साठ िर्ष से कम आयु का हो, सभं हता और उसके अंतगषत बनाए गए भनयमों, भिभनयमों और
आदेशों में उसे सौंपे गए कतषव्यों का भनिाषह करने के भलए भचककत्सकीय रूप से अयोग्य ह,ै तो मुख्य भनरीिक-
सह-सभु िधाकता ष या िेत्रीय भनरीिक-सह-सभु िधाकता ष भलभखत आदेश द्वारा ऐसे व्यभक्त को अभधकतम तीन माह
की अिभध के िीतर भचककत्सा योग्यता प्रमार् पत्र प्राप्त करने के भलए कह सकते ह,ैं जसै ा कक िे उसमें भनर्दषष्ट कर
सकत े ह;ैं और ऐसा कोई िी व्यभक्त भनर्दषष्ट अिभध के बाद उपयुषक्त ककसी िी पद पर तब तक काय ष नहीं कर
सकता जब तक कक उस े भचककत्सा योग्यता प्रमार् पत्र प्राप्त न हो जाए।
(2) उपयुषक्त कफटनेस का भचककत्सा प्रमार् पत्र ऐसे प्राभधकारी से और ऐसे रूप और तरीके से प्राप्त ककया जाएगा
जैसा कक बोिष परीिा उप-भिभध में भनधाषररत शतों के अधीन भनर्दषष्ट कर सकता ह।ै
(3) उप-भिभनयम (1) में ककसी बात के होत े हुए िी, कोई िी व्यभक्त सत्तर िर् ष की आयु प्राप्त करन े के बाद ककसी
खान में प्रबंधक या पदधारी के रूप में कायष नहीं करेगा; और खान में िाइंडिंग इंजन ऑपरेटर के मामले में
अभधकतम आयु सीमा 65 िर्ष तक सीभमत होगी।
अध्याय –III
भनरीिक-सह-सभु िधाकता ष और खान अभधकारी
18. मख्ु य भनरीिक-सह-सभु िधाकता ष या भनरीिक-सह-सभु िधाकताओंष की अहतष ाए.ँ –
(1) कोई व् यभक्त मुख् य भनरीिक के रूप में तब ही भनयुक् त ककया जाएगा जब िह केन् द्रीय सरकार द्वारा
अनुमोकदत ककसी शैभिक संस्ि ान स े खनन इंजीभनयरी में भििी और भिभनयम 4 के अधीन अनुदत् त प्रिम श्रेर्ी
प्रबंधक का प्रमार्-पत्र िी धारर् करता हो, अन् यिा नहीं।
(2) कोई व् यभक्त भनरीिक के रूप में तब ही भनयुक् त ककया जाएगा जब िह केन् द्रीय सरकार द्वारा अनुमोकदत
ककसी शैभिक संस्ि ान स े खनन इंजीभनयरी में भििी और भिभनयम 4 के अधीन अनुदत्त प्रिम श्रेर्ी प्रबंधक का
प्रमार्-पत्र िी धारर् करता हो, अन् यिा नहीं:
परन् तु -
(i) खानों म ें लग े भिद्यतु मशीनरी के संबंध में केन् द्रीय सरकार द्वारा अनुमोकदत ककसी शभै िक संस्ि ान की
भिद्युत इंजीभनयरी में भििी धारर् करने िाला व् यभक्त ऐसे भनयुक् त ककया जा सकेगा;
(ii) खानों में लगी अन् य मशीनरी या यांभत्रक साभधत्रों के संबंध में केन् द्रीय सरकार द्वारा अनुमोकदत ककसी
शैभिक संस्ि ान की यांभत्रक इंजीभनयरी या खनन यांभत्रकी में भििी धारर् करने िाला व् यभक्त ऐसे
भनयुक् त ककया जा सकेगा; और[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 19
(iii) संभहता तिा भनयमों और भिभनयमों के उन उपबंधों के सबं ंध में जो व् यभक्तयों के स्िास््य एिं कल्यार्
भिर्यों से संबंभधत ह,ै और्ध और शल् य भचककत् सा की बचै लर (एम.बी.बी.एस.) की भििी जो राष्ट्रीय
भचककत्सा आयोग स े पंजीकृत ह ै या केन् द्रीय सरकार द्वारा अनुमोकदत संस्िान स े धारर् करने िाला
व् यभक्त, या ऐसी अन् य अहतष ा, जो केन् द्रीय सरकार इस भनभमत अनुमोकदत करे, रखने िाला व् यभक्त ऐसे
भनयुक् त ककया जा सकेगा।
19. अभिकता ष की भनयभु क्त:- (1) खान का माभलक भलभखत रूप में मुख्य भनरीिक-सह-सुभिधाकताष
और िेत्रीय भनरीिक-सह-सुभिधाकताष को खान के प्रबंधन, भनयंत्रर्, पयषिेिर् और भनदेश के संबंध म ें
माभलक की ओर स े काय ष करने के भलए प्राभधकृत प्रत्येक व्यभक्त के नाम और पदनाम को दशाषन े िाला
एक भििरर् प्रस्तुत करेगा|
(2) उप भिभनयम (1) में भनर्दषष् ट भििरर् में ऐसे प्रत्येक व्यभक्त के दाभयत् िों का और उन भिर्यों का
भजक्र होगा भजसके बाबत उस े माभलक की ओर से कायष करने हते ु प्राभधकृत ककया गया हो।
(3) उप-भिभनयम (1) में भनर्दषष्ट ऐसा प्रत्येक व्यभक्त उसके भििरर् में भिभनर्दषष्ट दाभयत् िों की बाबत,
यिाभस्िभत उस खान या खान समूह का अभिकताष समझा जाएगा।
(4) उप-भिभनयमन (1) के तहत भनर्दषष्ट भििरर् ककसी खान या खानों के समहू के खुलने या पुनः खोलन े
की तारीख से ,जैसा िी मामला हो, सात कदनों के िीतर प्रस्तुत ककया जाएगा;
परन्तु ककसी खान या खानों के समूह के मामल े में, जैसा िी मामला हो, भजसे पहले से ही खोला जा
चुका ह,ै ऐसा भििरर् इस भिभनयमों के प्रिािी होने की भतभि स े एक महीने के अन्दर प्रस्तुत ककया
जाएगा |
(5) उप-भिभनयम (1) म ें भनर्दष्टष भििरर् में िर्र्षत नाम या अन् य ब् यौरे में कोई यकद तब् दीली, जोड़ या
फेरबदल ककया जाता ह ै तो इसकी भलभखत सूचना ऐसे तब् दीली, जोड़ या फेरबदल की तारीख से सात
कदन के अन् दर मुख्य भनरीिक-सह-सुभिधाकताष और िेत्रीय भनरीिक-सह-सभु िधाकताष को भलभखत रूप
में दी जाएगी।
(6) इस भिभनयम के अधीन खान के अभिकताष के रूप में ककसी व्यभक्त को भनयुक्त नहीं ककया जाएगा,
जब तक कक िह िारत का नागररक न हो और कैलेंिर िर्ष में कम से कम 240 कदनों की अिभध के भलए
िारत में भनिास न करता हो।
20. एजटें की योग्यताए ं :- 1) इन भिभनयमों के लागू होने के पिात् और अभिकताष की भनयुभक्त के सम्बन्ध में
भिभनयम 19 में भनभहत प्रािधानों के अधीन, 25 िर् ष स े कम या 70 िर्ष से अभधक आयु का कोई िी व्यभक्त,
खान माभलक के ओर से काम नहीं करेगा या काय ष जारी नहीं रखेगा या खान के अभिकताष के रूप में भनयुक्त नहीं
ककया जाएगा, जब तक कक उसके पास केंद्र सरकार द्वारा अनुमोकदत बैचलर स्नातक भििी और खान एि ं खनन
गभतभिभधयों के कायष में कम से कम 10 िर्ष का अनुिि नही हो|20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) ककसी अभियंता के भिरुि लाई गयी ककसी िी कायिष ाही में, चाह ें िह संभहता के तहत इस रूप में भनयुक्त
ककया गया हो या नहीं, यह बचाि नहीं होगा कक उसके पास संभहता और उसके तहत बनाए गए भनयमों,
भिभनयमों और आदेशों के प्रािधानों के अनुसार भजम्मेदाररयों को पूरा करने के भलए उप-भिभनयम (1) के तहत
भनधाषररत योग्यता और अनुिि नहीं ह।ै
(3) यकद कोई प्रश्न उठता ह ै कक ककसी खनन में भनयुक्त अभियंता के पास उप-भिभनयम (1) के तहत आिश्यक
योग्यताएँ और अनुिि ह ैं या नहीं , तो मुख्य भनरीिक-सह-सुभिधाकताष का भनर्षय अंभतम होगा।
21. प्रबधं कों के कायिष ार ररपोटष.– जब ककसी खान के प्रबंधक का पररितषन होता ह,ै तो बभहगाषमी प्रबंधक
आगमी प्रबंधक को, ऐसे प्रपत्र में जैसा मुख् य भनरीिक द्वारा सामान् य या भिशेर् आदेश द्वारा भिभनर्दषष् ट ककया
जाए, एक कायषिार ररपोटष सुपुदष करेगा, और कायषिार ररपोटष, बभहगाषमी और आगमी दोनों प्रबंधकों द्वारा
हस्त ािररत होगा और उसकी एक प्रभत ित्रे ीय भनरीिक सह सभु िधाकता ष को िेजी जाएगी।
22. सहायक प्रबधं क की भनयभु क्त - प्रत् येक खदान में, प्रबंधक को सहायता के भलए मुख्य भनरीिक-सह-
सुभिधाकताष द्वारा भनर्दषष्ट पैमाने (स्केल) के अनुसार, सहायक प्रबंधकों की भनयभु क्त की जाएगी।
बशते कक, जहा ँ भिशेर् पररभस्िभतयाँ मौजूद हों, िहाँ मुख्य भनरीिक-सह-सुभिधाकता ष भनर्दषष्ट पैमाने स े
अलग सहायक प्रबंधकों की भनयुभक्त में छूट दे सकता ह ै या उसकी मांग कर सकता ह।ै
23. सिं ातन अभधकारी की अहतष ाए ँ और भनयभु क्त - प्रत् यके िूभमगत खान में जहां औसत उत् पादन 2,500 टन स े
अभधक हो, प्रबंधक, इन भिभनयमों के उपबंधों के अनुसार खान में संिातन प्रर्ाली के रख-रखाि के पयषिेिर् के
कायष में एक संिातन अभधकारी की सहायता प्राप्त करेगा, जो भनम्न भलभखत अहतष ाएँ धारर् करने िाला व् यभक्त
होगा, अिाषत ् :–
(क) ऐसी खान की दशा में भजसमें औसत उत् पादन 10,000 टन से अभधक हो, प्रबंधक का प्रमार्-पत्र
और
(ख) प्रत् येक अन् य दशा में, प्रबंधक का प्रमार्-पत्र या केन् द्रीय सरकार द्वारा मान् यताप्राप्त खनन या
खनन इंजीभनयरी में भििी, भिप्ल ोमा या प्रमार्-पत्र धारक हो |
परन् तु, जहाँ भिशेर् पररभस्िभतयाँ भिद्यमान हों, िहाँ मुख् य भनरीिक सह सुभिधाकताष एक भलभखत
आदेश द्वारा और ऐसी शतों के अधीन जो िह उसमें भिभनर्दषष् ट करे, इन उपबंधों से हटकर, संितान अभधकारी
की भनयभु क्त अनुमभत दे सकता ह ै या इस े अपेभित कर सकता ह ै या संिातन अभधकारी की सहायताि ष उतन े
व् यभक्तयों की भनयुभक्त अपेभित कर सकता ह,ै जो इस भनभमत आदेश में भिभनर्दषष् ट ककए गए हों :
बशते कक जहां भिशेर् पररभस्िभतयां भिद्यमान हों, मुख्य भनरीिक-सह-सुभिधाकताष भलभखत आदेश द्वारा
और ऐसी शतों के अधीन, जो उसमें भिभनर्दषष्ट की जा सकें , इन उपबंधों के भिपरीत िेंरटलेशन अभधकारी की
भनयुभक्त की अनुमभत दे सकता ह ै या उसकी आिश्यकता बता सकता ह ै या िेंरटलेशन अभधकारी की सहायता के
भलए उतने व्यभक्तयों की भनयभु क्त की आिश्यकता बता सकता ह ै , भजतने आदेश में भिभनर्दषष्ट ककए जा सकें।
24. इंजीभनयरों की भनयभु क्त.– (1) प्रत्येक खान में जहा ँ मशीनरी का उपयोग ककया जाता ह,ै िहाँ यांभत्रक
अभियांभत्रकी या भिद्युत अभियांभत्रकी या खनन मशीनरी में भििी या भिप्लोमा या केंद्र सरकार द्वारा मान्यता
प्राप्त समकि योग्यता रखन े िाल े और खानों में क्रमशः भििी और भिप्लोमा धारक के मामल े में कम से कम 2[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 21
िर्ष और 5 िर्ष का अनुिि रखने िाल े एक अभियतं ा को ऐसी मशीनरी का सामान्य प्रिार संिालने और उसके
स्िापना, रखरखाि और सुरभित सचं ालन के भलए भजम्मेदार भनयुक्त ककया जाएगा, जो प्रबंधक के अधीन होगा।
परन् तु जहाँ 440 िोल्ट से अभधक का भिद्युत उजाष उपयोग ककया जाता हो और सिी भिद्युत उपस्क रों
की स्ि ापन िमता ।.0 एम.िी.ए. या उसस े अभधक हो, िहाँ ऊपर भिभनर्दषष् ट मापदंि के अभतररक् त खान म ें
लगाए गए सिी भिद्यतु उपस्क रों के िारसाधन के भलए एक अभियंता या अभधक अभियंताओं को, जो भिद्युत
इंजीभनयरी में भििी या भिप् लोमा या केन् द्रीय सरकार द्वारा मान् यता प्राप्त समतुल् य अहतष ा धारर् करता हो,
भनयुक् त ककया जाएगा:
परन् तु यह और कक मशीनीकृत खुली खदानों या मशीनीकृत पररचालन िाली ककसी िूभमगत खदान के
मामल े में , केंद्र सरकार द्वारा मान्यता प्राप्त मैकेभनकल इंजीभनयटरंग, खनन मशीनरी या समकि योग्यता म ें
भििी या भिप्लोमा रखने िाले एक या एक से अभधक व्यभक्तयों को ऊपर बताए गए मापदंिों के अभतररक् त खान
में लगाए गए सिी यांभत्रक उपकरर्ों का प्रिार सिं ालने के भलए िी भनयुक्त ककया जाएगा:
परन् तु यह िी कक इस उप-भिभनयम में कोई िी बात एक ही खान में दो या दो स े अभधक इंजीभनयरों के
भनयोजन को रोकना नहीं समझा जाएगा, जब तक ऐसे प्रत् येक इंजीभनयर का िेत्राभधकार और उत् तरदाभयत् ि का
दायरा प्रबंधक द्वारा भलभखत रूप में पररिाभर्त हो।
(2) उप-भिभनयम (1) में ककसी बात के होते हुए िी, मुख् य भनरीिक, ककसी खान या खानों के िग ष की बाित ्
उस उप-भनयम में भनर्दषष्ट योग्यता के अभतररक्त कोई योग्यता भनर्दषष्ट कर सकता ह,ै जब ऐसी खान या खानों के
ऐसे िग ष की पररभस्िभतयों को ध् यान म ें रखते हुए िह यह संतुष्ट हो जाता ह ै कक सरु िा कक भहत में ऐसा करना
आिश् यक ह।ै
(3) कोई िी व् यभक्त मुख्य भनरीिक-सह-सुभिधाकताष की भलभखत पूि ष अनुमभत के भबना और उसमें भिभनर्दष्टष
शतों के अधीन रहते हुए एक से अभधक खान में इंजीभनयर के रूप में कायष नहीं करेगा, या भनयुक् त नहीं ककया
जाएगा :
परन् तु, ऐसी कोई िी अनुज्ञा बारह मास स े अभधक की कालािभध के भलए प्रिािी नहीं रहगे ी जब तक
इसे निीकृत न ककया गया हो:
परन् तु यह और कक, मुख् य भनरीिक ककसी िी समय, एक भलभखत आदेश द्वारा, ऐस े ककसी अनुज्ञा को
पररितषन या रद्द कर सकता ह,ै यकद िे पररभस्िभतयाँ भजसके अधीन अनुज्ञा अनुदत् त की गई िी, बदल गई हो या
मुख् य भनरीिक ऐसा पाता ह ै कक इंजीभनयर ने अपने िार साधन प्रिार के अधीन खानों में प्रिािी पयषिेिर्
करने म ें समिष नहीं रहा ह।ै
(4) जहा ँ ककसी भनभमत अस्ि ायी अनुपभस्िभत के कारर् उप-भिभनयम (1) के अधीन भनयुक् त इंजीभनयर अपन े
कतषव् यों का पालन करन े म ें असमिष हो, िहा ँ प्रबंधक भलभखत रूप में ककसी ऐसे व्य भक्त को उसके कतषव् यों के
भनिषहन के भलए प्राभधकृत करेगा, भजसे िह उसके स्ि ान पर कायष करने के भलए सिम समझता ह:ै
परन् तु -
(क) प्रत् येक ऐसे प्राभधकरर् की सचू ना िेत्रीय भनरीिक को तत्क ाल िेजी जाएगी;
(ख) िेत्रीय भनरीिक की पूिष भलभखत सहमभत एिं ऐसे शतों के अधीन जो िह उसमें भिभनर्दषष्ट करे,
के भबना कोई ऐसा प्राभधकरर् तीस कदन से अभधक की कालािभध के भलए प्रिािी नहीं होगा;
और
(ग) िेत्रीय भनरीिक एक भलभखत आदेश द्वारा इस प्रकार कदए गए ककसी िी प्राभधकार को रद्द कर
सकेगा।22 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
25. खनन पयिष िे क की भनयभु क्त एि ं योग्यताए ँ -
(1) प्रत् यके खान के प्रत् येक चालू भशफ्ट म ें में खान के भिभिन् न भिभस्ट्रक् टों के प्रिार सिं ालने के भलए एक या एक
से अभधक खनन पयषिेिक भनयुक्त ककए जाएँगे, जब तक कक िेत्रीय भनरीिक सह सुभिधाकताष द्वारा अन् यिा
भिभनर्दषष् ट नहीं ककया जाए;
(2) खनन पयषिेिक को सौंपी गई खदान या भजला उप-भिभनयम (1) इतने बड़ े आकार का नहीं होगा, और न
ही इन भिभनयमों के तहत उसके कतषव्यों के अलािा कोई अभतररक्त कतव्यष ऐसा होगा, जो उसे इन भिभनयमों के
तहत उसे सौंपे गए कतषव्यों को संपूर्ष रूप से करने से रोकने की संिािना हो।
(3) इस भिभनयमन के प्रयोजनों के भलए, खनन पयषिेिक के रूप में भनयोभजत प्रत्येक व्यभक्त प्रबंधक के अधीनस्ि
और सहायक खनन पयषिेिक स े िररष्ठ होगा, उसके पास या तो प्रबंधक का प्रमार्-पत्र या खनन पयषिेिक का
प्रमार्-पत्र होगा।
26. यांभत्रक पयिष िे क की भनयभु क्त।- (1) हर खदान में जहाँ मशीनरी का इस्तेमाल होता ह,ै एक या एक स े
ज़्यादा मैकेभनकल सुपरिाइज़र को हर िर्किंग भशफ्ट म ें उनके इंचाजष के तहत रखी गई मशीनरी के इरेक्शन,
कमीशडनंग, ररपेयर, मेंटेनेंस और िीकमीशडनंग के सुपरभिज़न के भलए अपॉइंट ककया जाएगा, जब तक कक
रीजनल भनरीिक-सह- सुभिधाकताष द्वारा कुछ और न बताया जाए।
(2) उप-भनयम (1) के अन्तगषत यांभत्रक पयषिेिक को सौंपी गई मशीनें इतनी मात्रा में नहीं होंगी, और न ही इन
भिभनयमों के अन्तगषत उसके कतषव्यों के अभतररक्त कोई अभतररक्त कतषव्य ऐसे होंगे, जो उसे इन भिभनयमों के
अन्तगषत सौंपे गए कतषव्यों को पूर्षतः करने स े रोकें:
(3) इस भिभनयमन के प्रयोजनों के भलए, उप-भिभनयम (1) के अंतगषत इंजीभनयर के अधीनस्ि यांभत्रक पयषिेिक
के रूप में भनयोभजत प्रत्येक व्यभक्त के पास यांभत्रक इंजीभनयटरंग या खनन मशीनरी या ऑटोमोबाइल
इंजीभनयटरंग में भिप्लोमा या भििी या केन्द्रीय सरकार द्वारा इस प्रयोजन के भलए अनुमोकदत समकि योग्यता
होनी चाभहए।
बशते कक इन भिभनयमों के लागू होने स े पहले उप-भिभनयम (3) में उभल्लभखत योग्यता न रखने िाल े
यांभत्रक पयषिेिक के रूप में भनयुक्त व्यभक्त को इन भिभनयमों के अंतगषत यांभत्रक पयषिेिक के रूप में माना जाता
रहगे ा।
27. सििे कों की भनयभु क्त.– (1) प्रत् येक खान में अभधभनयम या भिभनयमों या तदधीन ककए गए आदेशों द्वारा
अपेभित सिेिर् और तलमापन (लेिडलंग) करने के भलए तिा नक् शों और सेक् शनों को तैयार करने के भलए एक
या अभधक व् यभक्त को, जो सिेिक का प्रमार्-पत्र धारर् करते हों, सिेिक के रूप म ें भनयुक् त ककया जाएगा।
परन् तु, भसफष भििृत खनन स्ि लों िाल े खानों की दशा में, इस उप-भिभनयम की कोई िी बात,
अभधभनयम या भिभनयमों या तदधीन ककए गए आदेशों द्वारा अपेभित सिेिर् और तलमापन (लेिडलंग) करने के
भलए तिा नक् शों और सेक् शनों को तैयार करन े के भलए, भसफष भििृत खानों के भलए सीभमत सिेिक का प्रमार्-
पत्र धारक एक या अभधक व् यभक्त को,सिेिक के रूप में भनयुक् त करने से नहीं रोकेगा।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 23
(2) मुख् य भनरीिक सह सुभिधाकता ष की पूि ष भलभखत भनर्दषष्ट और ऐसी शतों के अधीन जो िह उनम ें
भिभनर्दषष् ट करे, के भबना, कोई व् यभक्त एक से अभधक खानों का सिेिक या उसी खान में ककसी अन् य हभै सयत में,
भनयुक् त नहीं ककया जाएगा।
(3) भनयुक्त ककए जान े िाल े सिेिर्कताओंष की संख्या उस पैमाने पर होगी, जैसा कक मुख्य भनरीिक-सह-
सुभिधाकताष द्वारा समय-समय पर सामान्य आदेश द्वारा भनर्दषष्ट ककया जा सकता ह:ै
बशते कक भिशेर् मामलों में, मुख्य भनरीिक-सह-सुभिधाकताष भनर्दषष्ट पैमाने के अंतर में सिेिर्कताषओं की
भनयुभक्त में छूट दे सकता ह ै या उसे अभनिायष कर सकता ह।ै
(4) यकद ककसी खान में एक से अभधक सिेिक ह,ैं तो प्रत् येक सिेिक खान के उस िाग या खण्ि के सिेिक के
कतषव् यों और भजम् मेिाररयों का पालन करेगा जो उसे माभलक , अभिकताष या प्रबंधक द्वारा भलभखत रूप में सौंपा
गया हो :
परन् तु माभलक, अभिकताष या प्रबंधक सिेिकों में से ककसी एक को, इन भिभनयमों के अधीन तैयार और
अनुरभित ककए जानेिाले अपेभित नक् शों की तैयारी और अनुरिर् के भलए भजम् मेिार के रूप में भनयुक् त करेगा,
जो खान म ें सिेिर् कायष के समन् िय और समि पयषिेिर् के भलए िी उत्त रदायी होगा।
28. अभधकाररयों और सिम व्यभक्तयों की भनयभु क्त.- (1) माभलक, अभिकताष या प्रबंधक हर काम की भशफ्ट के
दौरान अभधकाररयों समेत उतने सिम व्यभक्तयों की भनयुभक्त करेगा, भजतने की ज़रूरत हो –
(i) खदान और उसके उपकरर्ों का पयाषप्त भनरीिर्;
(ii) खदान में सिी कायों की पूरी भनगरानी;
(iii) खदान में सिी मशीनरी को सुरभित तरीके से लगाना, चलाना और मेंटेन करना; और
(iv) संभहता तिा उसके अंतगतष बनाए गए भनयमों ि भिभनयमों की आिश्यकताओं को लाग ू करना।
(2) उप-भिभनयम (1) की आिश्यकता पर प्रभतकूल प्रिाि िाले भबना, जहां खदान में एक स े अभधक पाभलयों म ें
काम ककया जाता ह,ै िहां माभलक, अभिकताष या प्रबंधक यह व्यिस्िा करेंगे कक दोपहर की पाली और रात की
पाली के दौरान खदान कम से कम एक सहायक प्रबंधक के सामान्य पयषिेिर् में रह े और अन्य मामलों में एक
अनुििी खनन पयषिेिक के पयषिेिर् में रह।े
(3) प्रबंधक की यह भजम्मेदारी होगी कक िह देखे कक भनयुक्त व्यभक्त उनको सौंपे गए कतषव्यों को भनिाने म ें
सिम ह:ैं
शतष यह ह ै कक ककसी िी व्यभक्त को तब तक अभधकारी भनयुक्त नहीं ककया जाएगा जब तक उस े माभलक
द्वारा िुगतान न ककया जाता हो और िह मैनेजर के प्रभत जिाबदेह न हो।
(4) उप-भनयम (1) के अन्तगषत की गई सिी भनयुभक्तयों की प्रभतभलभपयाँ इस प्रयोजन हते ु रखी गई सभजल्द-
पृभष्ठत पुभस्तका में या पुनप्राषभप्त योग्य तिा गैर-संपादन योग्य इलैक्ट्रॉभनक रूप में दजष की जाएँगी, जहाँ ऐसे सिी
सिम व्यभक्तयों की सूची रखी जाएगी।24 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) उप-भिभनयम (3) की अपेिाओं पर प्रभतकूल प्रिाि िाले भबना प्रत् येक प्रबंधक ककसी खान का प्रिार
संिालने प यह संतुष्ट हो लेगा कक िे सब व् यभक्त जो पहले से उप-भिभनयम (1) के अधीन भनयुक् त हो चुके ह,ैं ि े
उन् ह ें सौंपे गए कतषव् यों का पालन करने में सिम ह;ैं और यकद िह उन् ह ें सिम पाता ह,ै तो िह या तो उनके
प्राभधकरर् पत्रों को प्रभतहस्त ािररत करेगा या उन्ह ें नए प्राभधकार पत्र जारी करेगा।
29. जनरल मनै जे मटें . - (1) कोि के सेक्शन 5 के तहत ककसी माइन के खुलने या ककसी माइडनंग ऑपरेशन के
शुरू होने का नोरटस, ऐसे इरादे से तीस कदन पहले, उस फॉमष और तरीके से कदया जाएगा जैसा मुख्य भनरीिक-
सह- सुभिधाकताष उस मकसद के भलए बताएगा, साि में एक प्लान िी होगा भजसमें माइन की सीमाएं और
माइन के शाफ्ट या ओपडनंग, ट्राई-जंक्शन या रेिेन्यू भपलर और दसू री खास और पक्की सतह की खाभसयत ें
कदखाई गई हों, और उसकी एक कॉपी रीजनल भनरीिक-सह- सुभिधाकताष को दी जाएगी।
बशते कक रेगुलेशन 116 के तहत ककसी खदान की सीमा में बदलाि होने पर, नई सीमा कदखाने िाला
एक प्लान बदलाि के सात कदनों के अंदर जमा करना होगा।
आगे यह िी प्रािधान ह ै कक प्रारंि की ऐसी सूचना तब िी दी जाएगी, जब खुली खदान में िूभमगत
खदान खोलने का अििा इसके भिपरीत इरादा हो।
(2) उप-भिभनयम (1) में भनर्दषष्ट नोरटस के साि भनम्नभलभखत संलि होंगे,-
(क) भिभनयमन 57 के उप-भिभनयम (1) के खंि (क) के अंतगषत तैयार की गई सतह योजना की एक प्रभत;
(ख) भिभनयमन 102 के अन्तगषत तैयार सुरिा प्रबन्धन योजना की प्रभत:
(3) जब कोई खदान खोल दी जाती ह,ै तो माभलक, अभिकताष या प्रबंधक तत्काल मुख्य भनरीिक-सह-
सुभिधाकताष, िेत्रीय भनरीिक-सह-सुभिधाकताष तिा भजला मभजस्ट्रेट को खोलन े की िास्तभिक तारीख की
सूचना देगा।
(4) जब ककसी खदान को साठ कदन से अभधक की अिभध के भलए छोड़ने या बंद करने अििा उसमें कामकाज
बंद करन े का इरादा हो, तो माभलक, अभिकताष या प्रबंधक मुख्य भनरीिक-सह-सुभिधाकताष द्वारा इस प्रयोजन के
भलए समय-समय पर आम या भिशेर् आदेश द्वारा भनर्दषष्ट प्ररूप और तरीके स े मुख्य भनरीिक-सह-सुभिधाकता,ष
िेत्रीय भनरीिक-सह-सभु िधाकताष तिा भजला मभजस्ट्रेट को ब्यौरा प्रस्तुत करेगा, भजसमें ऐसे छोड़ने, बंद करन े
या बंद करन े के कारर् तिा उससे प्रिाभित होन े िाले व्यभक्तयों की संख्या बताते हुए, ऐसे छोड़ने या बंद करन े
से कम से कम तीस कदन पहले भििरर् प्रस्तुत करेगा:[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 25
बशते कक जब अप्रत्याभशत पररभस्िभतयों के कारर्, ककसी खदान को उक्त सूचना कदए जाने से पहल े छोड़
कदया जाता ह,ै बंद कर कदया जाता ह ै या बंद कर कदया जाता ह ै या पूिष इरादे के भबना बंदी साठ कदनों की
अिभध से अभधक बढ जाती ह,ै तो सूचना तुरंत दी जाएगी।
(5) जब ककसी खदान को साठ कदन से अभधक अिभध के भलए छोड़ कदया गया हो, बंद कर कदया गया हो या
उसमें कामकाज बंद कर कदया गया हो, तो माभलक, एजटें या प्रबंधक, छोड़ने, बंद करन े या बंद करने की उक्त
अिभध की समाभप्त के सात कदनों के िीतर मुख्य भनरीिक-सह-सुभिधाकताष, िेत्रीय भनरीिक-सह-सुभिधाकता ष
और भजला मभजस्ट्रेट को मुख्य भनरीिक-सह-सुभिधाकता ष द्वारा इस प्रयोजन के भलए भनर्दषष्ट प्ररूप और तरीके स े
सूचना देगा।
(6 यकद ककसी खदान को छोड़ कदया जाता ह ै या बंद कर कदया जाता ह ै या उसमें साठ कदनों से अभधक समय तक
काम बंद कर कदया जाता ह ै या यकद खदान के स्िाभमत्ि में कोई पररितषन होता ह,ै तो व्यिसाभयक सरु िा,
स्िास््य एिं कायष शतें (केन्द्रीय) भनयम, 2025 के भनयम 66 के अतं गषत अपेभित ररटन ष ऐसे छोड़ने या बंद करन े
या स्िाभमत्ि में पररितषन के तीस कदनों के िीतर या काम बंद होने के नब्बे कदनों के िीतर, जसै ा िी मामला हो,
प्रस्तुत ककया जाएगा।
(7) (क) जब ककसी खदान को साठ कदन से अभधक अिभध के भलए छोड़ कदए जाने, बंद कर कदए जाने
अििा बंद कर कदए जान े के पिात पुनः खोलने का इरादा हो, तो माभलक, अभिकताष या प्रबंधक
खनन कायष को पुनः शुरू करने से कम से कम तीस कदन पहले मुख्य भनरीिक-सह-सुभिधाकताष,
िेत्रीय भनरीिक-सह-सुभिधाकताष तिा भजला मभजस्ट्रेट को मुख्य भनरीिक द्वारा प्रयोजन के भलए
भनर्दषष्ट प्ररूप और तरीके में अभधसूचना देगा।
(ख) जब कोई खदान पुनः खोल दी जाती ह,ै तो खदान का माभलक, अभिकता ष या प्रबंधक पुनः खोलने
की िास्तभिक तारीख की सचू ना तत्काल मुख्य भनरीिक-सह-सुभिधाकताष, िेत्रीय भनरीिक-सह-
सुभिधाकताष तिा भजला मभजस्ट्रेट को देगा।
(8) जब ककसी अभिकताष, प्रबंधक, अभियंता, सिेिक, िायुसंचार अभधकारी, सुरिा अभधकारी, या सहायक
प्रबंधक की भनयुभक्त की जाती ह ै या जब ऐस े ककसी व्यभक्त का रोजगार समाप्त कर कदया जाता ह ै या ऐसा कोई
व्यभक्त उक्त रोजगार छोड़ देता ह,ै या जब ककसी अभिकताष या प्रबंधक के पत े में कोई पररितषन होता ह,ै तो
माभलक, अभिकताष या प्रबंधक ऐसी भनयुभक्त, समाभप्त या पररितषन की भतभि से सात कदनों के िीतर मुख्य
भनरीिक-सह-सुभिधाकताष, िेत्रीय भनरीिक-सह-सुभिधाकताष को मुख्य भनरीिक द्वारा प्रयोजन के भलए भनर्दषष्ट
प्ररूप और तरीके में एक नोरटस देगा।26 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(9) जब ककसी खान के नाम या स्िाभमत्ि में अििा माभलक के पते में कोई पररितषन होता ह,ै तो माभलक,
अभिकताष या प्रबंधक पररितषन की भतभि स े सात कदन के िीतर मुख्य भनरीिक-सह-सुभिधाकताष, िेत्रीय
भनरीिक-सह-सुभिधाकताष को उस प्ररूप और तरीके में सूचना देगा, जसै ा कक मुख्य भनरीिक-सह-सुभिधाकता ष
द्वारा इस प्रयोजन के भलए भनर्दषष्ट ककया जा सकता ह:ै
बशते कक जहा ं ककसी खदान का स्िामी कोई फमष या व्यभक्तयों का कोई अन्य संघ ह,ै िहां पररितषन-
(i) ककसी फमष की भस्िभत में ककसी िागीदार का;
(ii) ककसी संघ की दशा में ककसी सदस्य का;
(iii) ककसी सािषजभनक कंपनी के मामले में ककसी भनदेशक का; या
(iv) भनजी कंपनी के मामले में ककसी िी शेयरधारक का,
पररितषन की भतभि से सात कदनों के िीतर मुख्य भनरीिक-सह-सुभिधाकताष, िेत्रीय भनरीिक-सह-सुभिधाकता ष
को िी सूभचत ककया जाएगा।
(10) जब ककसी खदान का माभलकाना हक ट्रांसफर होता ह,ै तो भपछला माभलक या उसका एजेंट, माभलकाना
हक ट्रांसफर के सात कदन के अंदर, कोि और उसके तहत बनाए गए रेगुलेशन या ऑिषर के तहत बनाए गए सिी
प्लान, सेक्शन, ररपोटष, रभजस्टर और दसू रे ररकॉिष, और खदान के कामकाज से जुड़ा सारा लेटर, नए माभलक या
उसके अभिकताष को सौंप देगा; और जब इस क्लॉज की ज़रूरतों का ठीक से पालन हो जाता ह,ै तो भपछले और
नए माभलक या उनके एजेंट तुरंत मुख्य भनरीिक-सह- सभु िधाकताष , रीजनल भनरीिक-सह- सुभिधाकताष को
भलखकर बताएंगे।
(11) कोई िी व्यभक्त संभहता की धारा 67 के अंतगषत प्रबंधक के रूप में तब तक कायष या भनयोभजत नहीं ककया
जाएगा, जब तक कक उसने 23 िर्ष की आयु प्राप्त नहीं कर ली हो और उसे खदान के माभलक या अभिकता ष
द्वारा िुगतान न ककया जाता हो और िह सीध े तौर पर उसके प्रभत उत्तरदायी न हो।
(12) मुख्य भनरीिक-सह- सुभिधाकताष के भलभखत पूिष अनुमभत के भबना और उसमें भिभनर्दषष्ट शतों के अधीन
रहते हुए, एक से अभधक खानों का प्रबंधक नहीं बनेगा या भनयुक्त नहीं ककया जाएगा :
बशते कक ऐसी कोई िी अनमु भत दो िर् ष से अभधक अिभध के भलए प्रिािी नहीं होगी, जब तक कक उसका
निीकरर् न ककया जाए:
आगे यह िी प्रािधान ह ै कक मुख्य भनरीिक-सह-सुभिधाकताष ककसी िी समय भलभखत आदेश द्वारा ऐसी
ककसी अनुमभत में पररितनष कर सकता ह ै या उसे रद्द कर सकता ह ै यकद भजन पररभस्िभतयों में अनुमभत दी गई[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 27
िी, िे बदल गई ह ैं या मुख्य भनरीिक-सह-सुभिधाकताष को लगता ह ै कक प्रबंधक उसके प्रिार के तहत खदानों म ें
प्रिािी पयषिेिर् करने में सिम नहीं ह।ै
(13) मुख्य भनरीिक-सह- सभु िधाकताष , भलभखत अनुमभत देकर, और उसमें बताई गई शतों के तहत, ककसी िी
ऐसे व्यभक्त को, भजसके पास माइडनंग सुपरिाइजर का सर्टषकफकेट ऑफ़ कॉभम्पटेंसी हो, ककसी िी खदान या
खदानों के मैनेजर के तौर पर एक तय समय के भलए काम करन े के भलए ऑिराइज़ कर सकता ह,ै िले ही उस
व्यभक्त के पास ऑक्यूपेशनल सेफ्टी, हल्े ि एंि िर्किंग कंिीशंस (सेंट्रल) रूल्स, 2025 के रूल 96 के तहत इस बारे
में बताई गई क्वाभलकफकेशन न हों; और ऐसे ही ऑिषर से ककसी िी समय ऐसी ककसी िी अिॉररटी को रद्द कर
सकता ह।ै
(14) जहा ं व्यािसाभयक सुरिा, स्िास््य एिं काय ष शत ें (केन्द्रीय) भनयम, 2025 के भनयम 96 के प्रािधानों के
अंतगषत प्रिम श्रेर्ी प्रबंधक प्रमार्पत्र या भद्वतीय श्रेर्ी प्रबधं क प्रमार्पत्र धारक व्यभक्त को प्रबंधक भनयुक्त ककया
गया ह,ै िहां भनम्न योग्यताए ं रखने िाले व्यभक्त को, मुख्य भनरीिक- सह -सुभिधाकता ष की भलभखत पूिष अनुमभत
के भबना और उसमें भनर्दषष्ट शतों के अधीन , अगले बारह महीनों के दौरान इस प्रकार भनयुक्त नहीं ककया
जाएगा, िले ही खदान के औसत उत्पादन में कोई कमी हो जाए।
(15) जहां अनुपभस्िभत के कारर् या ककसी अन्य कारर् से, प्रबंधक दैभनक व्यभक्तगत पयषिेिर् करने में असमिष
ह ै या संभहता या इन भिभनयमों या उनके अधीन बनाए गए आदेशों के अधीन अपने कतषव्यों का पालन करने म ें
असमिष ह,ै िहा ं माभलक, अभिकता ष या प्रबंधक भलभखत रूप में उस व्यभक्त को अभधकृत करेगा भजस े िह खदान के
प्रबंधक के रूप में कायष करने के भलए सिम समझता ह:ै
उसे उपलब्ध कराया -
(i) ऐसे व्यभक्त के पास प्रबंधक या खनन पयषिेिक का प्रमार्पत्र हो;
(ii) ऐसा कोई िी ऑिराइज़ेशन साठ कदनों से ज़्यादा समय के भलए लागू नहीं होगा; और
(iii) माभलक, एजेंट या मैनेजर, जैसा िी मामला हो, तुरंत रभजस्टिष पोस्ट, स्पीि पोस्ट, या ई-मेल से
रीजनल भनरीिक-सह- सुभिधाकताष को एक भलभखत नोरटस िेजेगा भजसमें बताया जाएगा कक
ऐसा ऑिराइज़ेशन ककया गया ह,ै और ऑिराइज़ेशन का कारर्, ऑिराइज़्ि व्यभक्त की
क्वाभलकफकेशन और अनुिि, और ऑिराइज़ेशन के शुरू और खत्म होन े की तारीख बताई जाएगी;
और
(iv) मुख्य भनरीिक-सह-सुभिधाकताष या िेत्रीय भनरीिक-सह-सुभिधाकताष, व्यािसाभयक सुरिा,
स्िास््य और कायष शतें (केन्द्रीय) भनयम, 2025 के भनयम 96 में भनर्दषष्ट योग्यता रखने िाले व्यभक्त के
मामले को छोड़कर, भलभखत आदेश द्वारा, कदए गए ककसी िी अभधकार को रद्द कर सकते ह।ैं28 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(16) उप-भिभनयम (15) के अन्तगषत प्रबंधक के रूप म ें कायष करने के भलए अभधकृत व्यभक्त की ऐस े प्राभधकरर्
की अिभध के दौरान िही भजम्मेदाररयां होंगी, िे िही कतषव्यों का भनिषहन करेंगे तिा िे प्रबंधक के समान ही
दाभयत्िों के अधीन होंगे।
(17) कोई िी प्रबंधक अपन े पद को खाली करने की इच्छा के कदन स े कम स े कम तीस कदन पहले स्िामी या
एजेंट को भलभखत में उभचत सूचना कदए भबना अपना पद खाली नहीं करेगा:
बशते कक माभलक या एजेंट मैनेजर को कम समय का नोरटस देकर अपना ऑकफस खाली करने की
इजाज़त दे सकता ह।ै
(18) ककसी िी प्रबंधक को माभलक या अभिकता ष द्वारा कोई काम नहीं सौंपा जाएगा, न ही िह स्ियं कोई ऐसा
काम करेगा, भजसके भलए उसे खदान से बार-बार या लंब े समय तक अनुपभस्ित रहना जरूरी हो।
(19) माभलक, अभिकता ष या प्रबंधक खान में कायषरत व्यभक्तयों की सुरिा और उभचत अनुशासन सुभनभित
करेंगे।
(20) माभलक या अभिकताष सिी खानों के प्रिेश द्वारों से पच्चीस ककलोमीटर की दरू ी के िीतर प्रबंधक और
सहायक प्रबंधक के भलए उपयुक्त आिासीय आिास उपलब्ध कराएगा, और प्रत्येक प्रबधं क और सहायक प्रबंधक
इस प्रकार उपलब्ध कराए गए आिास में भनिास करेंगे:
परंतु जहां भिशेर् करठनाइयाँ हों भजनके कारर् इन प्रािधानों का अनुपालन व्यािहाररक रूप से संिि न हो,
िहां मुख्य भनरीिक सह सुभिधाकताष भलभखत आदेश द्वारा और उसमें भनर्दषष्ट शतों के अधीन रहत े हुए, इनस े छूट
दे सकता ह।ै
(21) उप-भिभनयम (12) म ें इसके पिात् प्रदान की गई व्यिस्िा के भसिाय, कोई िी प्रबंधक ककसी अन्य खान
में प्रबंधक के रूप में या ककसी अन्य िमता में कायष नहीं करेगा।
(22) हर अभधकारी या सिम व्यभक्त बीमारी या िधै अनपु भस्िभत की भस्िभत म ें अपने िररष्ठ अभधकारी या
प्रबधं क को, जसै ी िी भस्िभत हो, समय रहत े पयाप्तष सचू ना दगे ा ताकक उसके स्िान पर ककसी अन्य व्यभक्त की
व्यिस्िा की जा सके।
(23) यकद इस भिभनयमन के अन्तगषत ककसी मामल े के सबं ंध में कोई संदेह उत्पन्न होता ह ै तो उसे भनर्षय हते ु
मुख्य भनरीिक-सह-सुभिधाकताष को िजे ा जाएगा।
(24) आपातकाल के मामले को छोड़कर, कोई िी व्यभक्त जो अभधकारी या सिम व्यभक्त नहीं ह,ै प्रबंधक के
माध्यम से ही ककसी अन्य तरीके से खदान में कायषरत ककसी व्यभक्त को भनदेश देगा, जो प्रबंधक के प्रभत
उत्तरदायी ह।ै[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 29
अध्याय – IV
खदान प्रबधं न, ठेकेदारों, भनमातष ाओं, अभधकाररयों, सिम व्यभक्तयों और श्रभमकों के कतव्यष और भजम्मदे ाररयाँ
30. माभलक के कतव्यष और भज़म्मदे ाररया।ँ - (1) हर खदान का माभलक यह पक्का करेगा कक खदान में काम करन े
िाले लोगों की सुरिा और सेहत के भलए खतरों को खत्म करने या कम करने के भलए एक सही और असरदार
सेफ्टी मैनेजमेंट प्लान (SMP) बनाया और लागू ककया जाए।
(2) स्िामी अपने भनयंत्रर् के अधीन खानों में कायषरत व्यभक्तयों की सुरिा एिं स्िास््य संबंधी खतरों को समाप्त
करने अििा न्यूनतम करने के भलए सिी आिश्यक उपाय करेगा और-
(क) यह सुभनभित करना कक खदान को सरु भित सचं ालन और स्िस्ि काय ष िातािरर् प्रदान करन े
के भलए भिजाइन ककया गया ह,ै भनर्मषत ककया गया ह,ै रखरखाि ककया गया ह ै और उसम ें
उद्देश्य के अनकु ूल भिद्युत, यांभत्रक और अन्य उपकरर्, भजसमें सचं ार प्रर्ाली िी शाभमल ह,ै
उपलब्ध कराए गए ह;ैं
(ख) यह सुभनभित करना कक मशीन या संयंत्र को इस तरह स े चालू, सचं ाभलत, रख-रखाि और बंद
ककया जाए कक श्रभमक अपनी या अन्य व्यभक्तयों की सुरिा और स्िास््य को खतरे में िाले भबना
उन्ह ें सौंपे गए कायष को कर सकें;
(ग) उस स्िान की भस्िरता बनाए रखने के भलए कदम उठाना, जहा ं लोगों को अपने काम के संदि ष
में पहुचं हो;
(घ) जहां तक संिि हो, प्रत्येक िूभमगत कायषस्िल स े दो भनकास की व्यिस्िा करें, भजनमें स े
प्रत्येक सतह पर बाहर भनकलने के पृिक साधनों से जुड़ा हो;
(ङ) कामगारों को होने िाले भिभिन्न खतरों की पहचान करने तिा उनके जोभखम के स्तर का
आकलन करने के भलए कायष िातािरर् की भनगरानी, मूल्यांकन तिा भनयभमत भनरीिर्
सुभनभित करना;
(च) उन सिी िूभमगत कायों के भलए पयाषप्त िायुसंचार सुभनभित करना, जहां पहुचं की अनुमभत
ह;ै
(छ) भिशेर् खतरों के प्रभत संिेदनशील िेत्रों के संबंध में, एक सुरभित कायष प्रर्ाली और श्रभमकों
की सुरिा सुभनभित करने के भलए एक पररचालन योजना और प्रकक्रया तैयार करना तिा उस े
कक्रयाभन्ित करना;30 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ज) आग, भिस्फोट और बाढ को रोकने, पता लगान े और उनका प्रसार रोकन े के भलए खान
संचालन की प्रकृभत के अनरूु प उपाय और सािधाभनयां बरतना;
(झ) यह सुभनभित करना कक जब श्रभमकों की सुरिा और स्िास््य को गंिीर खतरा हो, तो
पररचालन रोक कदया जाए और श्रभमकों को सुरभित स्िान पर पहुचं ा कदया जाए;
(ञ) यह पक्का करना कक जब मैनजे र या दसू रे अभधकारी ककसी व्यभक्त द्वारा इन भनयमों या कोि ऑफ़
प्रैभक्टस के भनयमों का पालन न करने की ररपोटष करें, तो तरु ंत सुधार के कदम उठाए जाएं; और
(ट) यह सुभनभित ककया जाए कक खदान की सरु िा प्रबंधन योजना में खंि (क) से (जे) में भनभहत
प्रािधान शाभमल हों, परंतु इन्हीं तक सीभमत न रह।ें
(3) (क) प्रत्येक खदान का माभलक खदान में सुरिा प्रबंधन योजना के प्रिािी कायाषन्ियन को सुभनभित
करने के भलए एक प्रलेभखत प्रबंधन ढांचा उपलब्ध कराएगा और बनाए रखेगा; और
(ख) ऊपर कदए गए िॉक्यूमेंट में मैनेजमेंट स्ट्रक्चर में पद संिालने िाले हर व्यभक्त की भज़म्मेदाररयों के
बारे में बताया जाएगा।
(4) प्रत्येक खदान का माभलक सुरिा प्रबंधन योजना के प्रिािी कक्रयान्ियन को सुभनभित करने के भलए पयाषप्त
संसाधन उपलब्ध कराएगा।
(5) प्रत्येक खदान का माभलक सुरिा प्रबंधन योजना की लेखापरीिा सुभनभित करेगा तिा उसकी
प्रिािशीलता एिं कायाषन्ियन की समीिा करेगा।
(6) माभलक प्रत्येक खदान के भलए उभचत रूप स े पूिाषनुमाभनत औद्योभगक और प्राकृभतक आपदाओं के भलए
भिभशष्ट आपातकालीन प्रभतकक्रया योजना तैयार करना सभु नभित करेगा।
(7) जहाँ श्रभमक शारीररक, रासायभनक या जैभिक खतरों के संपकष में आते ह,ैं िहाँ स्िामी-
(क) श्रभमकों को उनके कायष से जड़ु े खतरों, उनसे संबंभधत स्िास््य जोभखमों तिा प्रासंभगक भनिारक
एिं सुरिात्मक उपायों के बारे में समझने योग्य तरीके स े सूभचत करना;
(ख) उन खतरों के संपकष में आने से उत्पन्न होने िाले खतरों को खत्म करने अििा न्यूनतम करने के
भलए समुभचत उपाय करना;
(ग) जहां दघु षटना या सहे त को चोट लगने के खतरों, भजसमें खराब हालात म ें फंसना िी शाभमल ह,ै
से पूरी सरु िा दसू रे तरीकों से पक्की करना मुमककन नहीं ह,ै िहां काम करने िाले को भबना ककसी
खचष के सही सरु िा उपकरर्, ज़रूरत के भहसाब स े कपड़ े और इन भनयमों म ें बताई गई दसू री
सुभिधाएं दें और उनका रखरखाि करें; और
(घ) काम की जगह पर चोट लगने या बीमारी से परेशान िकषसष को फस्टष एि, काम की जगह से सही
ट्रांसपोटेशन और सही मेभिकल सुभिधाएं देना।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 31
(8) माभलक यह सुभनभित करेगा कक-
(क) श्रभमकों को सुरिा और स्िास््य मामलों के साि-साि सौंपे गए कायष पर पयाषप्त प्रभशिर् और
पुनः प्रभशिर् कायषक्रम और समझने योग्य भनदेश भबना ककसी खचष के प्रदान ककए जाते ह;ैं
(ख) खदान के सरु भित संचालन को सुभनभित करने के भलए प्रत्येक पाली में पयाषप्त पयषिेिर् और
भनयंत्रर् प्रदान ककया जाता ह;ै
(ग) एक ऐसा भसस्टम बनाया जाए भजससे ज़मीन के नीचे काम करने िाले सिी लोगों के नाम ककसी
िी समय सही-सही पता चल सकें, साि ही उनकी संिाभित लोकेशन िी पता चल सके; और
(घ) सिी दघु षटनाओं और खतरनाक घटनाओं की जाचं की जाती ह ै और उभचत सुधारात्मक कारषिाई
की जाती ह।ै
31. सप्लायर, मन्ै यफु ैक्चरर, भिज़ाइनर की सामान्य भज़म्मेदाररया ँ और तकनीकी सलाहकार। - (1) कोई व्यभक्त
जो धातुयुक्त खानों में उपयोग के भलए मशीनरी, उपकरर् या पदािों का भिजाइन, भिभनमाषर्, आयात, उपलब्ध
कराना या हस्तातं रर् करता ह,ै िह -
(क) यह पक्का करें कक मशीनरी, इकक्वपमटें या चीज़ ें उन लोगों की सरु िा और सहे त के भलए खतरा न
बन ें जो उनका सही तरीके स े इस्तमे ाल कर रह े ह ैं ; और
(ख) उपलब्ध कराना -
(i) मशीनरी और उपकरर्ों की सही स्िापना, रख-रखाि और उपयोग तिा पदािों के सही
ििं ारर् और उपयोग के भलए उनकी आिश्यकता स े सबं भं धत जानकारी ;
(ii) मशीनरी तिा उपकरर्ों के खतरों, खतरनाक पदािों तिा िौभतक एजन्े टों या उत्पादों के
खतरनाक गर्ु ों स े सबं भं धत जानकारी ;
(iii) प्रोिक्ट्स स े जड़ु े पहचान े गए खतरों स े होन े िाल े ररस्क को खत्म करन े या कंट्रोल करन े के
बारे म ें जानकारी; और
(iv) खानों में सुरभित संचालन के भलए मशीनरी के भिज़ाइन ककए गए जीिन काल के बारे में
जानकारी।
(क) कोई व्यभक्त, फमष या संस्िान जो तकनीकी अध्ययन और परामशष प्रदान करता ह,ै उसे –
(क) छूट और सीमाओं के साि अध्ययन और परामशष के भलए उभचत िैज्ञाभनक आधार सुभनभित
करना।
(ख) जब िी आिश्यक हो, पयाषप्त अध्ययन के बाद तकनीकी सहायता सुभनभित करें।32 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
32. ठेकेदार की भजम्मदे ारी.- (1) ककसी िी काम के भलए खान म ें तनै ात ठेकेदार-
a) काम शरूु करन े स े पहल े खदान के पयिष िे कों, अभधकाररयों और िररष्ठ अभधकाररयों के उभचत स्तर
के बीच प्रिािी चल रहा सचं ार और समन्िय स्िाभपत करना, भजसम ें खतरों की पहचान करन े
और जोभखमों को खत्म करन े और भनयभं त्रत करन े के उपायों के प्रािधान शाभमल होंग;े
b) खदान म ें काम करत े समय अपने कमषचाररयों के बीच काम स े जड़ु ी चोटों और बीमाररयों, खराब
स्िास््य और घटनाओं की ररपोर्टिंग के भलए व्यिस्िा सभु नभित करना ;
c) काम शरूु करन े स े पहल े और काम आग े बढन े पर, ज़रूरत के भहसाब स े अपन े िकषस ष को िकषप्लसे
सफ्े टी और हल्े ि के खतरों के बारे म ें जानकारी और ट्रेडनगं दने ा; और
d) कॉन्ट्रैक्ट स े जड़ु े काम के भलए कोि के भनयमों और उसके तहत बनाए गए भनयमों का पालन पक्का
करना।
(2) ठेकेदारों को तनै ात करत े समय, माभलक, अभिकता ष और प्रबधं क यह सभु नभित करेंग े कक-
(क) ठेकेदारों तिा उनके कमचष ाररयों पर िी िही सरु िा एि ं प्रभशिर् आिश्यकताए ँ लाग ू होंगी जो
प्रभतष्ठान के कमचष ाररयों पर लाग ू होती ह;ैं
(ख) जहा ँ ज़रूरी हो, भसफ़ष ऐस े कॉन्ट्रैक्टर को काम पर रखा जाए जो सही तरीके स े रभजस्टि ष हों या
भजनके पास लाइससें हों; और
(ग) कॉन्ट्रैक्ट म ें सरु िा और स्िास््य स े जड़ु ी ज़रूरतों के साि-साि, पालन न करन े पर सज़ा और सज़ा
का िी भज़क्र हो और ऐस े कॉन्ट्रैक्ट म ें खदान अभधकाररयों को यह अभधकार िी शाभमल होगा कक
जब िी गिं ीर चोट का खतरा कदख,े तो िे काम रोक द ें और ज़रूरी उपाय ककए जान े तक काम
रोक द।ें
(3) ठेकेदारों को भनयुक्त करते समय, माभलक या अभिकताष मुख्य भनरीिक-सह-सुभिधाकताष तिा िेत्रीय
भनरीिक-सह-सुभिधाकताष को खान में लगे प्रत्येक ठेकेदार का ब्यौरा प्रस्तुत करेगा भजसमें स्िाभमत्ि, सम्पकष
भििरर् सभहत पता, कदया गया अनुबंध तिा ऐसे अनुबंध के संबंध म ें प्रबन्ध, भनयंत्रर् तिा भनदेशन में ठेकेदार
की ओर से काम करने िाल े प्रत्येक व्यभक्त का नाम और पता दशाषने िाला भििरर् होगा।
33. सिम व्य भक्तयों के कतव्ष य - हर सिम व्यभक्त अपने सीभनयर अभधकाररयों के आदेश के भहसाब से काम
करेगा , कोि और इन रेगुलशे ंस और उनके तहत बनाए गए आदेश के प्रािधानों के अनुसार उसे कदए गए काम
पूरे करेगा, और ये नहीं करेगा –[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 33
(क) अपने िररष्ठ अभधकारी की मजं ूरी के भबना ककसी अन्य व्यभक्त को अपना काम करने के भलए भनयुक्त
करना;
(ख) अपनी गैरहाभज़री के समय के भलए उस अभधकारी स े पहले इजाज़त भलए भबना या ककसी काभबल
व्यभक्त से ररलीि हुए भबना खदु गैरहाभज़र रहना; और
(ग) ऐसे अभधकारी की इजाज़त के भबना, अपनी भशफ्ट के दौरान उन कामों के अलािा कोई और काम
नहीं करेगा भजनके भलए उस े अपॉइंट ककया गया ह।ै
34. अभधकाररयों के कतव्यष । - (1) हर अभधकारी, मैनेजर या अभसस्टेंट मैनेजर द्वारा उस े सौंपे गए कतषव्यों को
कोि और इन भनयमों और उनके तहत बनाए गए आदेशों के प्रािधानों के अनसु ार पूरा करेगा।
(2) प्रत्येक अभधकारी अपनी पूरी शभक्त से यह देखेगा कक उसके अधीन कायषरत व्यभक्त अपने-अपने कतषव्यों
को ठीक से समझें और उनका पालन करें।
35. प्रबधं क के कतव्यष और भजम्मदे ाररया.ँ - (1) हर खान में प्रबंधक द्वारा रोज़ाना भनजी भनगरानी की जाएगी:
बशते कक ज़मीन के नीचे काम करन े के मामले में, प्रबंधक हर तरह स े सरु िा पक्का करने के भलए हर हफ़्त े
कम से कम चार कदन काम की जगह का दौरा करेगा और उसकी जांच करेगा:
आगे यह िी प्रािधान ह ै कक प्रत्येक पखिाड़े में कम से कम एक बार राभत्र पाली में दौरा ककया जाएगा:
यह िी प्रािधान ह ै कक जहां ककसी अपररहायष कारर् से प्रबंधक उपरोक्त कतषव्यों या भनरीिर्ों को करन े
में असमिष ह,ै प्रबंधक उप-भिभनयम (2) के अंतगषत रखी गई पुभस्तका में इसका कारर् दजष करेगा।
(2) प्रबंधक इस काम के भलए रखी गई एक बाउंि पेज िाली बुक म ें या ररट्रीिेबल नॉन-एभिटेबल
इलेक्ट्रॉभनक फॉमष में एक िायरी रखेगा; और उसमें अपने हर इंस्पेक्शन का नतीजा और अगर कोई कमी भमली
हो, तो उसे ठीक करने के भलए प्रबंधक ने जो एक्शन भलया ह,ै उस े िी ररकॉिष करेगा।
(3) प्रबंधक सिी खनन पयषिेिकों तिा अन्य पदाभधकाररयों के भलए प्रत्येक कायष कदिस में एक बार उनस े
अििा सहायक प्रबंधक स े भमलने की व्यिस्िा करेगा ताकक उनके कतव्यष ों से संबंभधत मामलों पर चचाष की जा
सके।
(4) प्रबंधक खदान और उसमें काम करने िाले लोगों की सुरिा के भलए सही सामान और उपकरर्ों की
काफ़ी सप्लाई पक्का करेगा; और अगर िह खदान का माभलक या अभिकताष नहीं ह,ै तो जब ऊपर बताए गए
मकसद के भलए ककसी ऐसी चीज़ की ज़रूरत हो जो उसके ऑिषर करने के अभधकार के दायरे में न हो, तो िह
माभलक या एजेंट को भलखकर ररपोटष करेगा, और ऐसी हर ररपोटष की एक कॉपी उस मकसद के भलए रखी गई
बाउंि-पेज िाली ककताब में या ररट्रीिेबल और नॉन-एभिटेबल इलेक्ट्रॉभनक फ़ॉमष में ररकॉिष की जाएगी।34 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) उप-भनयम (4) के अन्तगषत आदेश प्राप्त होने पर, माभलक या अभिकताष शीघ्र ही उक्त सामभियों तिा
उपकरर्ों की आपूर्तष की व्यिस्िा करेगा और आदेश प्राप्त होने के तीन कदन के अन्दर प्रबंधक को आदेश को पूरा
करने के भलए की गई कारषिाई से भलभखत रूप में अिगत कराएगा।
(6) प्रबंधक प्रत्येक सिम व्यभक्त को उसके भिशेर् कतषव्य सौंपेगा तिा यह सुभनभित करने के भलए सिी
संिि कदम उठाएगा कक ऐसा प्रत्येक व्यभक्त संभहता तिा उसके अधीन बनाए गए भनयमों या भिभनयमों म ें
भनभहत उपबंधों को उभचत ढंग से समझे तिा उनका पालन करे।
(7) प्रबंधक प्रत्येक खनन पयषिेिक को अंभतम सिेिर् की भतभि तक की एक ट्रेडसंग उपलब्ध कराएगा,
भजसमें खनन पयषिेिक को सौंपे गए िूभमगत भजले के कायषकलापों को दशाषया जाएगा और ऐसी ट्रेडसंग में, जहा ं
खंिों या खभनज के ब्लॉकों को कम करन े या भनकालने का कोई कायष ककया जा रहा हो, अनुमभत का संदिष और
िह तरीका स्पष्ट रूप से दशाषया जाएगा, भजससे ऐसी कमी या भनकासी की जानी ह:ै
बशते कक खुली खदानों के मामले में, ऐसी ट्रेडसंग में उसके प्रिार के अंतगतष काम करने िाले भहस्सों को िी
कदखाया जाएगा।
(8) प्रबंधक संभहता या उसके अधीन बनाए गए भिभनयमों या आदेशों के उपबंधों के अनुसरर् में बनाई या रखी
जाने िाली सिी ररपोटों, रभजस्टरों तिा अन्य अभिलेखों की जांच करेगा और उन पर कदनांक के साि
प्रभतहस्तािर करेगा:
बशते कक प्रबंधक, भलखकर आदेश देकर, यह काम अभसस्टेंट मैनेजर को द े सकता ह,ै भसिाय उन मामलों
के जहां मनै ेजर को ररपोटष या रभजस्टर पर काउंटरसाइन करने के भलए कोई खास भनयम बनाया गया हो।
(9) प्रबंधक ककसी ऐसे भिभशष्ट अभ्यािेदन या भशकायत पर ध्यान देगा तिा उसकी सािधानीपूिषक जांच
कराएगा जो खान के ककसी कमषचारी द्वारा भलभखत रूप में प्रबंधक को खान में या उसके आसपास के व्यभक्तयों
की सुरिा या स्िास््य को प्रिाभित करने िाले ककसी मामले के बारे में की जाए।
(10) जब ककसी खदान म ें कोई दघु षटना होती ह,ै भजसके पररर्ामस्िरूप संभहता की धारा 10 म ें भनर्दषष्ट ककसी
व्यभक्त को शारीररक चोट या जीिन की हाभन होती ह ै या संभहता की धारा 11 के तहत भनर्दषष्ट कोई खतरनाक
घटना होती ह,ै तो प्रबंधक भजतनी जल्दी हो सके, दघु षटना या खतरनाक घटना के स्िल का भनरीिर् करेगा,
जैसा िी मामला हो, और स्ियं या ककसी सहायक प्रबंधक या सुरिा अभधकारी के माध्यम से इसके कारर्ों और
पररभस्िभतयों की जांच करेगा और प्रत्येक ऐसी जांच के पररर्ाम के साि एक योजना और खंि और जहा ं तक
व्यािहाररक हो, दघु षटना या खतरनाक घटना के स्िल की एक तस्िीर या तस्िीरों को भििरर् कदखाते हुए, इस
उद्देश्य के भलए रखी गई एक भजल्दबंद पुस्तक में या पुनप्राषभप्त योग्य और गैर-संपादन योग्य इलेक्ट्रॉभनक रूप म ें
दजष ककया जाएगा और इसकी प्रभतभलभप दघु षटना या खतरनाक घटना के पंद्रह कदनों के िीतर मुख्य भनरीिक-
सह-सुभिधाकताष और िेत्रीय भनरीिक-सह-सुभिधाकताष को दी जाएगी ।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 35
(11) प्रबंधक ऐसे अन्य कतव्यष ों का पालन करेगा जो सभं हता, भनयमों, भिभनयमों या उसके तहत बनाए गए
आदेशों के प्रािधानों के अंतगतष उस संबंध में भनधाषररत ककए गए ह।ैं
(12) प्रबंधक संभहता या उसके अधीन बनाए गए भिभनयमों या आदेशों के ककसी उपबंध का उल्लंघन करन े पर
ककसी कमषचारी को भनलंभबत कर सकता ह ै या उसके भिरुि अनुशासनात्मक कारषिाई कर सकता ह।ै
36. सहायक प्रबंधक के काम और भज़म्मदे ाररया।ँ - (1) सहायक प्रबंधक, प्रबंधक द्वारा उसे सौंपे गए कामों को
पूरा करेगा, और यह देखेगा कक मैनेजर द्वारा उसे सौंपे गए खदान के भहस्से में, सारा काम कोि के भनयमों और
उसके तहत बनाए गए भनयमों और आदेशों के अनसु ार ककया जाए।
(2) सहायक प्रबंधक, प्रबंधक के आदेशों के अधीन प्रत्येक कायष कदिस पर अपने प्रिार के अंतगषत कायष-िेत्र
अििा उसके ककसी िाग का दौरा करेगा तिा उसकी जाचं करेगा।
(3) सहायक प्रबंधक समय-समय पर खदान के प्रत्येक यात्रा योग्य िाग अििा उसके प्रिार के अन्तगषत आन े
िाले िाग की सािधानीपूिषक जांच करेगा, चाह े िहा ं काम करने िाले लोग आते-जात े हों या नहीं।
(4) प्रबंधक की अनुपभस्िभत में सहायक प्रबंधक की िही भजम्मेदारी होगी, िह उन्हीं कतषव्यों का भनिषहन
करेगा तिा प्रबंधक के समान ही दाभयत्िों के अधीन होगा, परंतु इस प्रकार नहीं कक प्रबंधक को इसस े छूट प्राप्त
हो।
(5) सहायक प्रबंधक इस प्रयोजन के भलए रखी गई सभजल्दबि पृष्ठ पुभस्तका में या पुनप्राषभप्त योग्य तिा
असंपादन योग्य इलैक्ट्रॉभनक रूप म ें अपने प्रत्येक भनरीिर् का पररर्ाम और देखे गए दोर्ों, यकद कोई हो, को
दरू करने के भलए उसके द्वारा की गई कारषिाई को ररकॉिष करेगा।
37. सिं ातन अभधकारी के कतव्यष .- (1) संिातन अभधकारी-
(क) िेंरटलेशन, स्ितः गमष होने, आग, गैस और धूल सभहत धलू दमन स े संबंभधत सिी भनयमों और
आदेशों का पालन सुभनभित करना और यकद िेंरटलेशन प्रर्ाली में ककसी िी पररितषन की
आिश्यकता हो तो प्रबंधक को सूभचत करना ताकक इन भनयमों या आदेशों के अनुपालन में
िेंरटलेशन की पयाषप्तता सुभनभित हो सके;
(ख) िेंरटलेशन, गैस, धूल, स्ितः गमष होने और आग जैसी कदन-प्रभतकदन की समस्याओं के बारे में
प्रबंधक को सलाह दने ा;
(ग) सहायक प्रबंधकों तिा अन्य अभधकाररयों के साि भनकट संपकष बनाए रख ें तिा उनकी कदन-
प्रभतकदन की िायु-संचार संबधं ी समस्याओं में उनकी सहायता करें;36 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(घ) खदान का िायु-संचार सिेिर् करना तिा उससे संबंभधत कोई अन्य भिशेर् कायष करना जैसा कक
प्रबंधक द्वारा समय-समय पर भनदेभशत ककया जाए;
(ङ) इन भिभनयमों के अनुसार या अन्यिा आिश्यक िेंरटलेशन मानकों के अनुपालन को सुभनभित
करने के भलए आिश्यक कदम उठाना;
(च) कदन में कम से कम एक बार मुख्य यांभत्रक िेंरटलेटर की गभत, उसके इलेभक्ट्रक मोटर द्वारा ली
गई एम्परेज, तिा पंखे के बहाि िाले जल गेज की जांच करेगा तिा जल गेज म ें ककसी िी
असामान्य पररितषन की जाचं करेगा तिा प्रबंधक को ररपोटष करेगा;
(छ) प्रत्येक तीन माह में कम से कम एक बार मुख्य यांभत्रक िेंरटलेटर की दिता भनधाषररत करना तिा
आिश्यक होने पर पंखों के ब्लेि तिा पंखे के भिफ्ट की सफाई करिाना;
(ज) यह सुभनभित करना कक मुख्य यांभत्रक िेंटीलेटर के बंद होने की भस्िभत में स्िायी आदेशों की
प्रभतयां खदान में प्रमुख स्िानों पर लगाई गई ह ैं और यह िी सुभनभित करना कक संबंभधत व्यभक्त
उनमें भनभहत भनदेशों को समझते ह;ैं
(झ) िूभमगत सहायक एिं बूस्टर पंखों की सही ढंग से स्िापना एिं स्िापना सुभनभित करना;
(ञ) खान में सिी िेंरटलेशन उपकरर्ों जैसे कक दरिाज,े ब्रैरटस, एयर क्रॉडसंग, रेगुलेटर, स्टॉडपंग,
बूस्टर और सहायक पंखे, िेंरटलेशन िडक्टंग और िेंरटलेशन भनयंत्रर् के अन्य उपकरर्ों की
भनयभमत अंतराल पर जांच करना और उनमें ककसी िी दोर् की ररपोटष प्रबंधक को करना;
(ट) ककसी िी उपकरर् से ककसी िी तरह के ररसाि को रोकने के भलए आिश्यक कदम उठाना और
यह सुभनभित करना कक िायसु ंचार उपकरर् अच्छी भस्िभत में बनाए रखे जाएं;
(ठ) यह सुभनभित करना कक सिी कायष स्िलों में पयाषप्त मात्रा में अच्छी हिा पहुचं े और जमीन के
नीचे अन्य सिी काय ष स्िलों तक पहुचं े और इस प्रयोजन के भलए,-
(i) देखें कक िायु-संचार रोकने िाले ढांचे, ब्रैरटस इत्याकद भिभनदेशों के अनुसार बनाए गए ह ैं
तिा पयाषप्त रूप से फैले हुए ह;ैं
(ii) देखें कक िाय ु की मात्रा, तापमान और आद्रषता के माप भनयभमत रूप स े भनर्दषष्ट ककए जाते ह ैं
और प्रत्येक िायु मापन स्टेशन पर उपलब्ध कराए गए चके बोिष पर प्रभिभष्टयां अद्यतन की
जाती ह;ैं
(iii) िेंरटलेशन दिता िागफल (िीईक्यू) भनधाषररत करना;
(iv) यह देखना कक खदान की हिा के सैंपल तय समय और जगह पर ठीक से इकट्ठा ककए जाएं,
और उन्ह ें लेने के 48 घंटे के अंदर उनका एनाभलभसस ककया जाए; और
(v) ज्िलनशील तिा ककसी अन्य हाभनकारक गैसों का भनरीिर् करना;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 37
(ि) िाय-ु संचार तिा बचाि योजनाओं की अलग-अलग ट्रेडसंग बनाए रखना तिा उन्ह ें अद्यतन
रखना;
(ढ) िायुसंचार प्रर्ाली या िायुसंचार उपकरर्ों में ककसी िी पररितषन को सिेिक के ध्यान में
लाएगा तिा यह सुभनभित करेगा कक िायुसंचार तिा बचाि योजनाओं पर सिी पुराने भचह्नों
को ठीक कर कदया गया ह ै तिा नये िायुसचं ार पररपि तरु न्त कदखाये गये ह;ैं
(र्) खदान में उपलब्ध बैरोमीटर की भनयभमत जांच करना और बैरोमीटर के दबाि में ककसी िी
असामान्य पररितषन की ररपोटष उभचत कारषिाई के भलए प्रबंधक को देना;
(त) पयाषिरर् भनगरानी के भलए खानों में प्रयोग ककए जाने िाले उपकरर्ों और तंत्रों की देखिाल
करना तिा यह सुभनभित करना कक ऐसे सिी उपकरर् अच्छी भस्िभत में रखे जाएं तिा भनर्दषष्ट
अंतराल पर उनका अंशांकन ककया जाए;
(ि) स्ितः गमष होने तिा आग लगने के लिर्ों के भलए, यकद आिश्यक हो तो अभिरोधक स्िलों
सभहत काय ष िेत्रों तिा पुराने कायों का भनयभमत रूप स े दौरा करेगा तिा अपने द्वारा देखे गए
ऐसे ककसी लिर् की तुरन्त प्रबंधक को ररपोटष करेगा तिा श्रभमकों की सुरिा के भलए तत्काल
आिश्यक कदम स्ियं उठाएगा;
(द) अभिशमन उपायों की जाँच करना तिा भनयभमत अभ्यास द्वारा आिश्यक कदम उठाना, ताकक
यह सुभनभित हो सके कक सिी अभिशमन उपकरर् कायशष ील भस्िभत में ह ैं तिा खदान में आग
लगने की भस्िभत में संबंभधत कमषचारी स्िस्ि ह ैं तिा अपन े कतषव्यों से पररभचत ह;ैं
(ध) खदान में धूल की उभचत सफाई, उपचार एिं दमन के भलए आिश्यक कदम उठायें तिा यह देख ें
कक कायषस्िल के नब्बे मीटर के िीतर गीली कटाई तिा जल भछड़काि की व्यिस्िा ठीक प्रकार
से स्िाभपत की गयी ह ै तिा संतोर्जनक ढंग से कायष कर रही ह;ै
(न) यह सुभनभित करना कक िायु में उपभस्ित धूल के नमून े भनयभमत रूप स े भनर्दषष्ट तरीके स े भलए
जाएं;
(प)सीलबंद िेत्रों से िायु के नमूने, िीजल िाहनों से भनकलने िाली गैसों तिा ऐस े अन्य स्िानों स े
नमूने एकत्र करना, जैसा कक प्रबंधक द्वारा अपेभित हो;
(फ) यह सुभनभित करना कक िेंरटलेशन, स्ितः गमष होना, आग, गैस और धूल स े संबंभधत सिी
ररकॉिष और ररपोटष अद्यतन रखी जाएं और िेंरटलेशन के भलए चेक बोिष में भनयभमत रूप से प्रभिभष्टयां
की जाएं:38 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
बशते कक ऊपर बताई गई कोई िी बात प्रबंधक, सहायक प्रबंधक, सिेयर, खनन पयषिेिक , अभसस्टेंट
खनन पयिष िे क या ककसी िी दसू रे संबंभधत व्यभक्त को इन रेगुलेशंस या इसके तहत बनाए गए ककसी िी ऑिषर
में उनके भलए बताए गए ककसी िी भमलते-जुलते काम और भज़म्मेदाररयों से छूट नहीं देगी; और
(ब)खदान के िेंटीलेशन से सबं ंभधत ककसी िी मामल े में प्रबंधक की सहायता करना।
(2) आपात भस्िभत को छोड़कर, िेंरटलेशन अभधकारी को ऊपर भनर्दषष्ट कतषव्यों के अलािा कोई अन्य कतव्यष
नहीं सौंपा जाएगा।
(3) संिातन अभधकारी एक भजल्दबंद पृष्ठ िाली पुभस्तका या पुनप्राषभप्त योग्य तिा गैर-संपादन योग्य
इलेक्ट्राभनक प्रारूप में प्रभतकदन उसके द्वारा ककए गए काय ष का भिस्तृत अभिलेख रखेगा।
38. खनन पयिष िे क के कतव्ष य और भज़म्मदे ाररया।ँ - (1) खनन पयषिेिक , बड़े अभधकाररयों के ऑिषर के भहसाब
से, खदान के उस भहस्स े की भज़म्मेदारी, चाजष और कंट्रोल रखेगा, और मनै ेजर द्वारा उसे कदए गए कामों को पूरा
करेगा।
(2) खनन पयषिेिक-
(क) ड्यूटी के दौरान ऐसे भजले के कामकाज की ट्रेडसंग रखेगा तिा ट्रेडसंग को अद्यतन रखेगा;
(ख) अपने भजले में इन भिभनयमों द्वारा अपेभित भनरीिर् और ररपोटष तैयार करना;
(ग) यह सुभनभित करना कक उसके भजले के अधीनस्ि अभधकारी और सिम व्यभक्त अपने-
अपने कतषव्यों का उभचत तरीके से पालन करें;
(घ) यह सुभनभित करना कक उप-भिभनयम (1) के अन्तगषत उसे सौंपे गए खान के भहस्स े में
खनन काय ष इन भिभनयमों के अन्तगषत तैयार की गई आचार संभहता के अनुसार ककए
जाते ह।ैं
(3) खनन पयषिेिक अपनी पूरी शभक्त के साि अपने भजले में संभहता, इन भनयमों तिा इसके अधीन बनाए गए
आदेशों के उपबंधों को लागू करेगा तिा प्रबंधक तिा सहायक प्रबंधक, यकद कोई हो, के भनयंत्रर् के अधीन रहत े
हुए ऐसे भनदेश देगा, जो उन उपबंधों का अनुपालन सुभनभित करने के भलए तिा भजले की सरु िा तिा िहा ं
कायषरत व्यभक्तयों की सुरिा तिा उभचत अनुशासन सुभनभित करन े के भलए आिश्यक हों।
(4) खनन पयषिेिक यह देखेगा कक उसके भजले के सरु भित कामकाज के भलए आिश्यक लकड़ी, सहायक
सामिी, ब्रेरटस, उपकरर् और अन्य आिश्यक िस्तुओं की पयाषप्त आपूर्तष िहां सुभिधाजनक स्िानों पर रखी
गई ह।ै[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 39
(5) खनन पयषिेिक-
(क) यह सुभनभित करना कक प्रत्येक एयर-क्रॉडसंग, स्टॉडपंग, दरिाजा, ब्रैरटस और अन्य
िेंरटलेशन भििाइस अच्छी भस्िभत में बनाए रखा जाए;
(ख) यह पक्का करेगा कक उसके इलाके में िेंरटलेशन ठीक से हो; और जब काम करने की
जगहों के िेंरटलेशन के भलए ब्रेरटस या एयर पाइप या िक्ट इस्तेमाल करने की ज़रूरत
हो, तो िह देखेगा कक उन्ह ें काफी आग े रखा जाए ताकक हर काम करन े की जगह तक
काफी हिा पहुचं सके;
(ग) उनके अधीन ऐस े ककसी िी व्यभक्त को खदान से बाहर िेजन े का अभधकार होगा जो
संभहता या उसके अधीन बनाए गए भिभनयमों या आदेशों के ककसी प्रािधान का
उल्लंघन करता ह ै या उल्लंघन करने का प्रयास करता ह,ै या सुरिा के संबंध में कदए गए
ककसी भनदेश का पालन करने में भिफल रहता ह,ै और ऐसे मामले की भलभखत रूप म ें
प्रबंधक को ररपोटष करेगा;
(घ) यह सुभनभित करना कक सिी पटररयां और ट्रामलाइनें उभचत प्रकार से भबछाई गई हों,
िेिेि हों, भगट्टी िरी गई हों या अन्यिा पैक की गई हों;
(ङ) देखें कक ढुलाई सड़कों पर मैनहोल सुरभित रखे गए ह,ैं ककसी िी अिरोध से मुक्त ह,ैं
और ठीक स े सफेदी की गई ह;ै
(च) सुभनभित करें कक स्टॉप-ब्लॉक, रनिे भस्िच और अन्य सरु िा उपकरर् तय ककए गए ह ैं
और भनयमों के तहत आिश्यक रूप से उपयोग ककए जाते ह,ैं िैग या बैक-स्टे प्रदान ककए
जाते ह ैं और भनयभमत रूप से टब के पीछे चढत े हुए ढलान का उपयोग ककया जाता ह ै
और जहां टब को ढाल पर लोि ककया जाता ह ै या हाि स े ढाल से नीचे उतारा जाता ह,ै
िहां उपयुक्त स्प्रैग की पयाषप्त आपूर्तष प्रदान की जाती ह;ै
(छ) यकद उसे अपने भजले में उपयोग में लाई जा रही ककसी रस्सी, जजं ीर, संकेत, ब्रेक, भजग
व्हील तिा पोस्ट या अन्य उपकरर् को असुरभित भस्िभत में पाए तो उसका उपयोग
तुरन्त बंद कर दे ;
(ज) यह पक्का करना कक इंस्पेक्शन, जांच और मरम्मत के मकसद को छोड़कर, अभधकारी या
हॉलेज अटेंिेंट के अलािा हर कोई ट्रैिडलंग रोि से यात्रा करे; और
(झ) उसे कदखे या ररपोटष ककए गए ककसी िी खतरे को हटान े पर तुरंत ध्यान देगा और यह
देखेगा कक खतरनाक जगहों को अच्छी तरह से घेर कदया गया ह।ै
(6) खुली खदानों में खनन काय ष की भस्िभत में खनन पयषिेिक यह सुभनभित करेगा कक-
a) बेंचों के ककनारे ठीक से सजाए गए ह;ैं40 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
b) बेंचों की भस्िरता खतरे में नहीं ह;ै
c) ढुलाई सड़कों का रखरखाि ककया जाता ह;ै
d) ओिरबिषन िंप की भस्िरता खतरे में नहीं ह;ै
e) कायषरत स्िानों पर पुरुर्ों एिं मशीनरी की अभधक िीड़ नहीं ह;ै
f) उसके भनयंत्रर् िाले िेत्र में पयाषप्त रोशनी की व्यिस्िा की गई ह;ै
g) भिस्फोट संचालन करन े से पहले इन भिभनयमों में भनधाषररत पयाषप्त सािधाभनयां बरती जाती ह;ैं
h) सिी मशीनरी और प्लांट सरु भित तरीके से चलाए जात े ह;ैं और
i) धूल कंट्रोल के उपाय लागू ककए गए ह।ैं
(7) खनन पयषिेिक-
(क) अपना पूरा समय अपने कतषव्यों को समर्पषत करेगा और अपने भजले म ें प्रत्येक कायषस्िल
का यिासंिि या आिश्यक रूप से दौरा करेगा;
(ख) उभचत कारर् के अलािा, अपने प्रिार िाले भजले को तब तक नहीं छोड़ेगा/गी जब तक
कक िह इन भिभनयमों के अंतगषत अपेभित भनरीिर् और अन्य कतषव्य जो उसे करन े
अपेभित ह,ैं पूरे नहीं कर लेता/लेती ह,ै या जब तक कक उसे ककसी सम्यक रूप से भनयक्तु
स्िानापन्न द्वारा कायषमुक्त नहीं कर कदया जाता/जाती ह;ै
(ग) अगर खदान में लगातार भशफ्ट में काम हो रहा ह,ै तो उसके बाद आने िाले अभधकारी
से बात करें और उसके बाद आने िाले अभधकारी को ऐसी जानकारी दें जो उसके भजल े
और िहां काम करने िाले लोगों की सुरिा के भलए ज़रूरी हो; और
(घ) भशफ्ट के आभखर में, िह इस मकसद के भलए रखी गई एक भजल्दबंद ककताब में या ऐसे
इलेक्ट्रॉभनक फॉमष में भजसे िापस पाया जा सके और भजस े बदला न जा सके, बताए गए
फॉमेट में भशफ्ट के दौरान अपनी सिी ड्यूटी के बारे में एक आम ररपोटष ररकॉिष करेगा,
भजसमें खदान के ठीक से काम करन े और उसके भजल े में काम करने िाल े लोगों की
सुरिा और अनुशासन से जुड़ी कोई िी बात शाभमल होगी।
39. याभं त्रक पयषिेिक के कतव्यष और भजम्मदे ाररया।ं - (1) यांभत्रक पयषिेिक, िररष्ठ अभधकाररयों के आदेशों के
अधीन रहत े हुए, ऐस े संयंत्र और मशीनरी की भजम्मेदारी तिा प्रिार रखेगा तिा ऐस े कतव्यष ों का पालन करेगा,
जो प्रबंधक द्वारा उसे सौंपे जाएंगे।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 41
(2) यांभत्रक पयषिेिक-
(क) ड्यूटी के दौरान अपने प्रिार में संयंत्र और मशीनरी का भनरीिर् करना तिा यह सुभनभित करना कक
ये सुरभित काय ष भस्िभत में ह ैं ;
(ख) अपने प्रिार के तहत रखी गई मशीनरी के भनमाषर्, चालू करने, मरम्मत, रखरखाि, बंद करने और
मार्चिंग का पयषिेिर् करना तिा यह सुभनभित करना कक सिी कायष इन भिभनयमों के अंतगषत तैयार
की गई संबंभधत आचार संभहता के अनसु ार ककए जाएं;
(ग) यह सुभनभित करना कक उसके अधीनस्ि अभधकारी एिं सिम व्यभक्त इन भिभनयमों के अंतगषत तैयार
की गई आचार संभहता के अनुसार अपने-अपने कतव्यष ों का पालन करेंगे;
(घ) ककसी व्यभक्त को अपने इंचाजष के तहत इस्तेमाल हो रह े ककसी प्लांट, मशीनरी या दसू रे उपकरर् की
हालत असरु भित लगे, तो िह तरु ंत उसका इस्तेमाल बंद कर देगा और इसकी जानकारी इंजीभनयर को
भलखकर देगा; और
(ङ) अपनी भशफ्ट के आभखर में, इस मकसद के भलए रखी गई एक भजल्दबंद ककताब में या ऐसे इलेक्ट्रॉभनक
फॉमष में भजसे भनकाला जा सके और भजसे एभिट न ककया जा सके, अपने चाजष के तहत प्लांट और
मशीनरी के सही और सुरभित कामकाज से जुड़ी सिी एभक्टभिटीज़ पर एक ररपोटष ररकॉिष करें।
40 सहायक खनन पयिष िे कों के कतव्यष और भजम्मदे ाररयाँ - (1) भिभनयम 122 के अन्तगषत भनयुक्त सहायक
खनन पयषिेिक या अन्य सिम व्यभक्त, िररष्ठ अभधकाररयों के आदेशों के अधीन, प्रबंधक या सहायक प्रबंधक
द्वारा उस े सौंपे गए खान के भजले का उत्तरदाभयत्ि, प्रिार और भनयंत्रर् रखेगा।
(2) सहायक खनन पयषिेिक-
(क) संभहता तिा भिभनयमों की अपेिाओं तिा उसके अधीन व्यभक्तयों द्वारा कदए गए आदशे ों
का उभचत पालन सुभनभित करने के भलए उभचत उपाय करेगा तिा यिाशीघ्र उसके
िररष्ठ अभधकारी को इसके ककसी उल्लंघन की ररपोटष करेगा;
(ख) इन भिभनयमों द्वारा अपेभित ऐसे भनरीिर् तिा ररपोटष तैयार करना, और ऐसी जाचं
करते समय, िह सहारे की जाँच तिा गसै की उपभस्िभत पर भिशेर् ध्यान देगा;
(ग) लगातार पाभलयों में काम करने िाली खदान के मामले को छोड़कर , भजले का पहला
भनरीिर् पूरा होने पर, भिभनयमन 122 के तहत भनर्दषष्ट स्टेशन पर जाएं और सिी
व्यभक्तयों को उनके कायष के स्िानों के बारे में और उनके द्वारा बरती जाने िाली
आिश्यक भिशेर् सािधाभनयों के बारे में भनदेश दें;42 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(घ) यकद िह ककसी व्यभक्त को उसके भलए भनयत स्िान के अलािा ककसी अन्य स्िान पर
पाता ह,ै तो िह ऐस े व्यभक्त को खदान स े बाहर भनकालने का आदेश दे सकता ह,ै और
मामले की सूचना तुरन्त अपने िररष्ठ अभधकारी को देगा;
(ङ) यह सुभनभित करना कक ककसी अनुििहीन व्यभक्त को ककसी कायष पर तब तक भनयुक्त न
ककया जाए जब तक कक िह ककसी अनुििी व्यभक्त की देख-रेख में न हो;
(च) देखें कक उसके भजले में सिी यात्रा सड़कों तिा कायष स्िलों की छत और ककनारे बने हों
तिा सरु भित रखे जाए;ं
(छ) जहां उसके प्रिार िाले भजल े में ककसी कायष स्िल की फशष से छत तक की ऊंचाई तीन
मीटर से अभधक ह,ै िहा ं देखें कक भजले में सुभिधाजनक स्िानों पर एक उपयुक्त लकड़ी
का बंटन या िंिा रखा जाए भजससे छत के सिी भहस्सों का फशष पर खड़े व्यभक्त द्वारा
प्रिािी ढंग से परीिर् ककया जा सके तिा उपयुक्त लंबाई की एक सीढी रखी जाए;
(ज) भजले के सरु भित कामकाज के भलए आिश्यक लकड़ी, सहायक सामिी, उपकरर्ों और
अन्य आिश्यक िस्तुओं में ककसी िी कमी की ररपोटष अपन े िररष्ठ अभधकारी को देना;
(झ) जहां भजले से बाहर भनकलने के दो रास्तों में स े कोई िी आम तौर पर आने-जान े के भलए
इस्तेमाल नहीं होता ह,ै िहा ं हर सात कदन में कम से कम एक बार, उस पूरी सड़क पर
घूमें ताकक खुद को उससे अच्छी तरह जान सकें; और
(ञ) देखें कक सुरिा प्रोप-भनकासी के अलािा कोई समिषन िापस नहीं भलया गया ह।ै
(3) अगर सहायक खनन पयिष ेिक अपने भनरीिर् के दौरान कोई खतरनाक जगह देखता ह ै या उसे ककसी ऐसी
जगह पर, जहां काम करने िाले लोग काम करते ह,ैं ककसी खतरे की खबर भमलती ह,ै तो अगर खतरे को तुरंत
हटाना मुमककन न हो, तो िह उस जगह से सिी लोगों को हटा देगा और तब तक उस जगह को नहीं छोड़ेगा
जब तक खतरा उसकी मौजदू गी में दरू न हो जाए या उस जगह के सिी रास्तों को बंद न कर कदया जाए ताकक
लोग गलती से उस जगह में न जा सकें।
(4) सहायक खनन पयषिेिक-
(क) इस बात का ध्यान रखेगा कक कोई िी खतरनाक कायष पूरी सािधानी के साि ककया जाए, और ऐसे मामलों
में, जब िी जमीन से गड्ढे साफ करन े या िहां सहारे स्िाभपत करने का कायष ककया जा रहा हो, तो िह िहा ं
मौजूद रहगे ा;
(ख) प्रत्येक ऐसे स्िान के प्रिेश द्वार पर, जो िास्ति में उपयोग में नहीं ह ै या कायष या भिस्तार के क्रम
में नहीं ह,ै पूरी चौड़ाई में बाड़ लगा दी जाए, ताकक लोगों को अनजाने में ऐसे स्िान में प्रिेश करन े
से रोका जा सके;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 43
(ग) यकद उसे ज्िलनशील या हाभनकारक गैसों का कोई संचय भमलता ह,ै तो िह भिभनयम 151 म ें
भनर्दषष्ट सािधाभनया ं बरतेगा और ऐसे संचय को तब तक नहीं हटाएगा जब तक कक उस े अपन े
िररष्ठ अभधकारी स े इस संबधं में भनदेश प्राप्त न हो जाएं;
(घ) अपने भजले में ककसी व्यभक्त को दघु षटना की सूचना भमलने पर, तरु ंत दघु षटना स्िल पर जाकर,
स्िान का भनरीिर् करें और यकद आिश्यक हो, तो बचाि कायों की भनगरानी करें और प्रबंधक या
सहायक प्रबंधक को दघु षटना की ररपोटष करें या सूचना िजे ें;
(ङ) अपना पूरा समय अपने कतषव्यों को समर्पषत करेगा, तिा पारी के अंत तक या भिभधित भनयुक्त
स्िानापन्न द्वारा कायषमुक्त ककए जाने तक खदान नहीं छोड़गे ा;
(च) अगर खदान म ें लगातार भशफ्ट में काम होता ह,ै तो अपना भिभस्ट्रक्ट छोड़ने स े पहले, अभसस्टेंट
खनन पयिष िे क या उनके बाद आने िाले ककसी दसू रे काभबल व्यभक्त से बात करें, और उन्ह ें उन
सिी मामलों की जानकारी दें भजन पर उन्ह ें खुद ध्यान देने की ज़रूरत ह ै और उन्ह ें ऐसी दसू री
जानकारी दें जो उनके भिभस्ट्रक्ट और िहां काम करने िाले लोगों की सुरिा के भलए ज़रूरी हो
सकती ह;ै और
(छ) यह सुभनभित करना कक उप-भिभनयम (1) के अन्तगषत उसको सौंपे गए खान भजल े में खनन काय ष
इन भिभनयमों के अन्तगषत तयै ार की गई आचार संभहता के अनुसार ककये जाते ह।ैं
(5) खुली खदानों के कायो की भस्िभत में सहायक खनन पयषििे क यह सुभनभित करेगा कक-
(क) बेंचों के ककनारों को उभचत ढगं से तैयार रखा जाता ह;ै
(ख) बेंचों की भस्िरता खतरे में नहीं ह;ै
(ग) ढुलाई सड़कों का रखरखाि ककया जाता ह;ै
(घ) ओिरबिषन िंप की भस्िरता खतरे में न हो; और
(ङ) धूल भनयंत्रर् उपाय लागू ककए जाते ह।ैं
41. ब्लास्टर के कतव्यष एि ं भजम्मदे ाररया.ँ - ब्लास्टर को –
a) भिस्फोटकों के पररिहन और उपयोग के संबंध में भिभनयमों के प्रािधानों और उनके तहत बनाए
गए ककसी िी आदेश के अनसु ार अपने कतषव्यों का पालन करें;
b) अपने सहायकों द्वारा, यकद कोई हो, ऐसे प्रािधानों और सुरिा की दभृ ष्ट से ककसी िररष्ठ अभधकारी
द्वारा कदए गए ककसी भनदेश के पालन के भलए भजम्मेदार होगा;
c) ककसी िी अनभधकृत व्यभक्त को कोई भिस्फोटक नहीं सौंपना;44 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
d) यह सुभनभित करें कक भमट्टी, रेत या अन्य उपयुक्त स्टेडमंग सामिी सुभिधाजनक स्िानों पर पयाषप्त
मात्रा में उपलब्ध हो;
e) जब गोभलयां चलाई जा रही हों और उन्ह ें रोका जा रहा हो, तो िह मौजूद रहगे ा; और खुद
गोभलयां चलाएगा; और
f) अगर गोली भमसफायर हो जाए, तो यह देखने की भज़म्मेदारी होगी कक जगह पर ठीक से बाड़
लगी हो, और रेगुलेशन 179 के भनयमों का सख्ती से पालन हो।
42. सपोटषपसनष के कतव्ष य सहायक व्यभक्त के कतव्यष - सपोटषपसनष :-
(क) हगैं िॉल, फुटिॉल तिा पीछे की ओर छत तिा अन्य कायष स्िानों की सुरिा के संबधं
में प्रबंधक या सहायक प्रबंधक, खनन पयषिेिक, सहायक खनन पयिष िे क या अन्य
सिम व्यभक्त के आदशे ों का पालन करना;
(ख) यह सुभनभित करना कक सपोटों की स्िापना समिनष योजना के अनरूु प हो;
(ग) अपने भजले में सपोटष मटीररयल की ककसी िी कमी की ररपोटष तुरंत सहायक खनन
पयिष िे क या ककसी दसू रे सिम व्यभक्त को द;ें और
(घ) लकड़ी के इस्तेमाल के मामले में, यह देखने की भज़म्मेदारी लें कक लकड़ी के टुकड़ े
ज़मीन के नीचे ककसी िी काम में न छोड़े जाएं।
43. मख्ु य याभं त्रक सिं ातक के पररचारक के कतव्यष - मने मैकेभनकल िेंरटलेटर का अटेंिेंट-िेंरटलेटर (क) संिातक
को प्रबंधक द्वारा भनधाषररत गभत पर चालू रखेगा;
(ख) एक घंटे से अनभधक के अन् तरालों पर मशीनरी की परीिा करेगा तिा दाब अभिलेखन या जल-प्रमापक
(िाटर गेज) और गभत-सूचक का प्रेिर् करेगा और सचू क के अभिलेखों को इस प्रयोजन के भलए पंखा-गृह पर
रखी गई भजल् दबि संख्यांककत पुभस्तका में भलखेगा;
(ग) मशीनरी के रूक जाने, उसको कोई नुकसान होने, उसमें कोई त्रुरट या गड़बड़ी होने, या जल-प्रमापक या
अन् य सूचकों में कोई असामान् य तब् दीली को तुरन् त अपने िररष्ठ पदधारी को ररपोटष करेगा, और खान के
संिातन के संबंध में ककन् हीं असामान् य पररभस्िभतयों को िी, जो उसकी दभृ ष्ट में आई हों, ररपोटष करेगा;
(घ) जहाँ संिातक भनरंतर चालू रहता ह,ै िहा ँ अपने स्ि ान को तब तक नहीं छोड़ेगा जब त क कक ककसी सम् यक
रूप से भनयुक् त प्रभतस्ि ानी द्वारा अिमुक् त नहीं हो जाता।
44. लम्ै प कि के िारसाधक के कतव्ष य - लम्ै प कि के िारसाधक व्यभक्त-
(क) यह सुभनभित करने के भलए उत् तरदायी होगा कक सरु िा लैंप कि में सुरिा लैंप सभहत सब लैंप भनमाषताओं
के भिभनदेशनों के अनुरूप और इन भिभनयमों के उपबंधों के अनुसार यिोभचत रूप स े रखें जाएँ;
(ख) यह देखेगा कक सुरिा लैम् प कि साफ-सुिरी दशा में रखा जाए और िभतपूर्ष या त्रुरटपूर्ष प्रमापक, शीशे
और भनरापद लैम् पों के अन् य िाग, उस कि में न रखे, या जमा ककए जाएँ;
(ग) यह देखेगा कक अभिशामक यन् त्र या आग का सामना करने के अन् य साधन, भजनकी सुरिा लैम् प कि म ें
व् यिस् िा की गई ह,ै अच् छी दशा में रह ें और उपयोग के भलए आसानी से उपलभ् य रह;ें[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 45
(घ) यह देखेगा कक सुरिा लैम् पों के भनगषम, िापसी और अनरु िर् के भलए भिभनयमों द्वारा अपेभित सब
अभिलेख उभचत रूप स े रखे जाएँ;
(ि.) यह देखेगा कक िूभम के नीच े जानेिाल े प्रत् येक व् यभक्त को एक पयाषप्त रूप से चाजष ककया हुआ लैम् प कदया
जाए जो कम से कम पारी के पूर्ष होने तक कायम रह;े
(च) सुरिा लैम् प के अनरु िर्, भनगषम और िापसी से संबंभधत ऐस े अन् य कतषव् यों का पालन करेगा जो प्रबंधक या
सहायक प्रबंधक द्वारा भिभनर्दषष्ट ककए जाएँ।
45. सििे क के कतव्यष एि ं उत्तरदाभयत्ि।- (1) सिेिक-
(क) ऐसे शुि सिेिर् और तलमापन करेगा और ऐसे नक् श े और सेक् शन और उनके ट्रेडसंग बनाएगा, भजनका
प्रबंधक भनदेश दे या जो अभधभनयम, भिभनयमों या तदधीन ककए गए आदेशों द्वारा अपेभित हों, और नक् शों,
सेक् शनों और उनके ट्रेडसंगों पर हस्त ािर करके तारीख िालेगा;
(ख) अपने द्वारा बनाए गए या हस्त ािररत नक् शा और सेक् शन या उनके ट्रेडसंगों की शुिता के भलए उत्त रदायी
होगा।
(2) सिेिक इस प्रयोजन के भलए रखी गई भजल् दबि पृष्ठ संख् यांककत पुभस्तका या पुनप्राषभप्त योग्य और गैर-
संपादन योग्य इलेक्ट्रॉभनक प्रारूप में भनम्न भलभखत भलखेगा:-
(क) उस समय के समस्त त् य जब खान की खनन स्ि लें, खान की सीमा या अप्रयुक् त या जलप् लाभित खनन
स्ि लों से लगिग 75 मीटर की दरू ी तक पहुचँ गई हों ;
(ख) इन भिभनयमों के अधीन तैयार ककए गए नक् शों और सेक् शनों से संबंभधत कोई शंकाएँ;
(ग) नक् शों और सेक् शनों की तैयारी के बारे में कोई और बात जो िह प्रबंधक की दभृ ष्ट में लाना चाह,े
और पुभस्तका में की गई प्रत् येक प्रभिभष्ट पर सिेिक हस्त ािर करके तारीख िालेगा और प्रबंधक प्रभतहस्त ािर
करके तारीख िालेगा :
परन् तु, जहाँ ककसी खान में दो या दो स े अभधक सिेिक भनयोभजत ककए गए हों, िहाँ उनमें से प्रत् येक
सिेिक अपनी अभधकार िेत्र की खनन स् िलों या अपने िारसाधनाधीन नक् शों या सेक्श नों के संबंध में उपरोक्त
प्रभिभष्ट भलखेगा।
(3) उपभिभनयम (2) की कोई िी बात, माभलक, अभिकताष या प्रबंधक को अभधभनयम और इन भिभनयमों या
तदधीन ककए गए आदेशों के उपबंधों के अधीन अपने उत् तरदाभयत् ि से मुक् त नहीं करेगा।
46. इंजीभनयर के कतव्यष और भजम्मदे ाररया ँ - इस उद्देश्य के भलए भनयुक्त इंजीभनयर-
(क) प्रबंधक और अन् य िररष् ठ पदधारी के आदेशों के अधीन रहते हुए, खान में की सब मशीनरी का साधारर्
िारसाधन करेगा, और ऐसी मशीनरी के उभचत संस्ि ापन, अनरु िर् और भनरापद चालन के भलए उत् तरदायी
होगा;
(ख) यह सुभनभित करेगा कक जब ककसी मशीनरी का स्ि ानान् तरर् होता ह,ै या कोई नई मशीनरी लगाई जाती
ह ै तो उसका उपयोग ककए जाने के पूिष िह परीिर्ािष चलाई जाती ह ै और प्रत् येक बार ऐसे परीिर् के दौरान
उपभस्ित रहगे ा;
(ग) जब किी ककसी िाइडन्िंग रस्स ी के प्रभतष्ठ ान,तब् दीली या पुन: कैप लगाने या ससपेंशन-भगयर के प्रभतष्ठ ान,
तब् दीली या तापानुशीनल का काम चल रहा हो तो बराबर उपभस्ित रहगे ा।
(घ) यह सुभनभित करेगा कक अभधभनयम और भिभनयमों या तदधीन ककए गए आदेशों के मशीनरी के संस्ि ापन,
अनुरिर्, संकक्रया या परीिा से संबंभधत उपबंधों का, यिाभस्ित, िह अपने द्वारा और अधीनस्ि पदधाररयों,
सिम व् यभक्तयों, या इस प्रयोजन के भलए भनयुक् त कामगारों द्वारा यिोभचत पालन ककया जाए;
(ि.) यकद इस प्रयोजन के भलए मेकेभनक, इलेभक्ट्रभसयन या अन् य अधीनस्ि पदधारी या सिम व् यभक्त भनयुक् त
ककए जात े ह,ैं तो िह मशीनरी के संस्ि ापन, अनरु िर्, संकक्रया या उसकी परीिा से संबंभधत सब ररपोटों,46 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
रभजस्ट रों और अन् य अभिलेखों की, भजनका बनाया या रखा जाना अभधभनयम, इन भिभनयमों या तदधीन ककए
गए आदेशों के अनुसार अपेभित ह,ै परीिा करेगा और उन पर प्रभतहस्त ािर करके तारीख िालेगा।
47. िाइंडिगं इंजन ऑपरेटर के कतव्यष ।- (1) एक िाइंडिगं इंजन ऑपरेटर भजसके पास िाइंडिंग इंजन ऑपरेटर
का योग्यता प्रमार्पत्र ह,ै उसे-
(क) अपनी पारी के प्रारंि में अपने िारसाधन के इंजन, ब्रेकों और सिी साभधत्रों की परीिा करेगा और इस
भिर्य में अपना समाधान करेगा कक िे अच् छी हालत में ह;ै
(ख) अपनी पारी के दौरान िर्किंग ऑपरेटर िाइंडिंग इंजन और उससे संबंभधत उपकरर् को यिोभचत रूप स े
साफ और तेलयुक्त दशा में रखेगा और यह सुभनभित करेगा कक इंजन का कमरा साफ और ज् िलनशील सामिी
से मुक् त ह;ै
(ग) अपने िारसाधन के इंजन, ब्रेक, सूचक, िम, रस्स ी या अन् य साभधत्रों की ककसी त्रुरट को, जो िाइंडिंग इंजन
ऑपरेटर ने देखी हो, तरु न् त ही भलभखत रूप में इंजीभनयर या इस प्रयोजन के भलए भनयुक् त अन् य सिम व् यभक्त
को ररपोटष करेगा;
(घ) ककसी अप्राभधकृत व् यव्यभक्त को इंजन कि में प्रिेश या इंजन में ककसी िी प्रकार हस्त िेप नहीं करने देगा;
(ि.) संकेतों की भिभहत संभहता से अपन े को पूर्ष रूप से अिगत करेगा और सतकषता स े उसकी पालन करेगा,
और इंजन को तब तक चालू नहीं करेगा जब तक ऐसा करने के भलए यिोभचत संकेत प्राप्त नहीं कर लेता:
परन् तु यकद सकं ेत अस्प ष्ट हो तो जब तक सकं ेत की पुनरािृभत नहीं होती और िाइंडिंग इंजनऑपरेटर
उसे स् पष्ट रूप से समझ नहीं लेता , िह इंजन चालू नहीं करेगा;
(च) इंजन को चालू करने में , उसकी संकक्रया में और उसको रोकने में झटके को बचाएगा और डपंजर या अन् य
प्रिहन साधन को रूकने के स्ि ान पर हल्क े स े ठहराएगा;
(छ) भजस समय शाफ्ट में व् यभक्त उतारे या चढाए जा रह े हों तब इंजन को उस गभत से तीव्रतर गभत से नहीं
चलाएगा, जो मनुष्य ों के चढने के प्रयोजन के भलए प्रबंधक द्वारा भनयत और िेत्रीय भनरीिक द्वारा अनुमोकदत
की गई हो;
(ज) अपने इंजन के िम को तब तक क् लच मुक् त नहीं करेगा जब तक उसन े तरु न् त पहले ही िम के ब्रेक का
इंजन की संपूर्ष शभक्त के भिरूि परीिर् कर के अपना इस भिर्य में समाधन न कर भलया हो कक ब्रेक उक्त िम
से भनलंभबत िार को धारर् करने के भलए उभचत दशा में ह:ै
परन् तु जब िम क् लचमुक् त हो जाता ह ै तो िह ब्रेक का उपयोग ऐसे िम को गभतहीन बनाए रखने के
प्रयोजन के भलए ही करेगा, और ककसी क्ल चमुक् त िम से मनुष्य ों या सामिी को नहीं उतारेगा;
(झ) जब तक इंजन गभत में रह े या जब शाफ्ट में व् यभक्त डपंजर या अन् य प्रिहन साधन में चढा हो तब तक हिैं ल
या ब्रेक को ककसी िी कारर् से नहीं छोड़ेगा; और
(ञ) जब व् यभक्त शाफ्ट में काम कर रह े हों तब इंजन को नहीं छोड़ेगा और जब किी इंजन को छोड़ने का अिसर
आए तब िह भिद्यतु शभक्त काट देगा और िमों को ब्रेक द्वारा सुरभित कर देगा।
(2) ऐसे िाइंडिंग इंजन का, भजसके द्वारा शाफ्ट में व् यभक्त उतारे या चढाए जाते ह,ैं िह अपनी िर्किंग की
समाभप्त पर इंजन को तब तक नहीं छोड़ेगा जब तक सब व् यभक्त शाफ्ट से बाहर न आ गए हों, या जब तक िह
सम् यक रूप से भनयुक् त प्रभतस्ि ानी द्वारा अिमुक् त न कर कदया गया हो।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 47
48. भपट टॉप अटेंिेंट, बले मनै और भसिलमनै के कतव्यष । - (1) प्रत्येक भपट टॉप अटेंिेंट, बेलमैन और भसिलमैन-
(क) िररष्ठ अभधकारी के आदेश के अधीन, शाफ्ट या भिनज़ या लैंडिंग या इनसेट के ऊपर या
नीचे, जसै ा िी मामला हो, पूर्ष भनयंत्रर् रखेगा और ऐसे अभधकारी को ऐसे ककसी िी
व्यभक्त की ररपोटष करेगा जो भबना अभधकार के सकं ेत देता ह ै या भनदेशों की अिहले ना
करता ह;ै
(ख) भनधाषररत भसिल कोि से खदु को अच्छी तरह पररभचत कराएगा तिा उस पर ध्यान
देगा तिा कदए गए साधनों द्वारा भसिलों को उभचत ढंग स े िेजेगा:
बशते कक भपट टॉप अटेंिेंट, बेलमैन या भसिलमैन ककसी ऐसे भसिल पर कारषिाई नहीं करेगा भजसकी
सत्यता के बारे में उस े संदहे हो, भसिाय उस भसिल के भजसके बारे में िह मानता हो कक िह “रुकन े के भलए” ह ै
और ककसी अनभधकृत व्यभक्त को भसिल देने की अनुमभत नहीं देगा;
(ग) संकेत संस्िापन में ककसी प्रकार की खराबी की तरु न्त अपने िररष्ठ अभधकारी को ररपोटष
करें;
(घ) अपना सम्पूर्ष समय अपने कतषव्यों को समर्पषत करेगा तिा अपने कतषव्य की अिभध के
दौरान अपना पद नहीं छोड़गे ा;
(ङ) जहां व्यभक्तयों को शाफ्ट में ऊपर उठाया या नीच े ककया जाता ह,ै िह अपनी पारी के
अंत में अपना पद नहीं छोड़ेगा जब तक कक सिी व्यभक्त शाफ्ट से बाहर नहीं आ जात े ह ैं
या जब तक कक ककसी भिभधित भनयुक्त स्िानापन्न द्वारा उन्ह ें मुक्त नहीं कर कदया
जाता ह;ै
(च) ककसी िी समय डपंजरे या पररिहन के अन्य साधनों में अभधकृत संख्या से अभधक
व्यभक्तयों को प्रिेश की अनुमभत नहीं देना;
(छ) जब तक मैनेजर इस बारे में भलखकर खास तौर पर इजाज़त न दे, ककसी िी व्यभक्त को,
जब िह डपंजरे या गाड़ी के दसू रे साधनों म ें सिार हो, अपने साि औज़ारों और
इंस्ूमेंट्स के अलािा कोई िारी सामान ले जाने की इजाज़त न दे:
बशते कक इस खंि की कोई बात ककसी ब्लास्टर या अन्य सिम व्यभक्त द्वारा डपंजरे या पररिहन के अन्य
साधनों में भिस्फोटकों को ले जाने पर रोक लगान े िाली नहीं समझी जाएगी;
(ज) मरम्मत अििा ककसी अन्य कारर् स े िाइंडिंग के दो घंटे से अभधक अिभध के भलए रोके
जाने के पिात, ककसी िी व्यभक्त को डपंजरे अििा अन्य पररिहन साधन म ें तब तक48 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
सिारी करने की अनुमभत न दी जाए, जब तक कक उसे शाफ्ट के कायषशील िाग में ऊपर
और नीच े कम से कम एक पर्ू ष चक्कर न लगा भलया गया हो;
(झ) ककसी िी व्यभक्त को ककसी डपंजरे या अन्य पररिहन साधन के ऊपर या ककनारे पर चढने
की अनुमभत नहीं देगा, भसिाय तब जब िह शाफ्ट में जांच, मरम्मत या ककसी अन्य
काम में लगा हो;
(ञ) व्यभक्तयों के डपंजरे में प्रिेश करने के बाद, डपंजरे को नीचे या ऊपर करने के भलए सकं ेत
देने से पहले देखें कक दोनों तरफ के डपंजरे के द्वार अपनी भस्िभत में ह ैं और बंद ह;ैं
(ट) ककसी अनभधकृत व्यभक्त को डपंजरे के अंदर या बाहर टब को संिालने की अनुमभत नहीं
देना;
(ठ) जब टबों को नीचे या ऊपर ककया जा रहा हो, तो डपंजरे या अन्य पररिहन साधन को
दरू जाने का संकेत देने से पहले देख ले कक कैच टबों को ठीक प्रकार से पकड़े हुए ह ै या
नहीं और यकद उसे टब-कैच में कोई दोर् कदखाई देता ह ै तो िह तुरन्त अपने िररष्ठ
अभधकारी को सूभचत करेगा;
(ि) ककसी शाफ्ट या इनसेट के ककसी प्रिेश द्वार पर, भजसमें ऐसे गेट या बाड़ लगे ह ैं भजन पर
डपंजरा या पररिहन के अन्य साधन काम नहीं करते, तब तक गेट या बाड़ को हटाना
शुरू नहीं करेगा जब तक कक डपंजरा या पररिहन के अन्य साधन प्रिेश द्वार पर रुक न
जाएं, और डपंजरे या पररिहन के अन्य साधन को दरू जाने का संकेत देने के पहले गटे
बंद कर देगा और िह ककसी अनभधकृत व्यभक्त को गेट खोलने या उसमें हस्तिेप करने
की अनुमभत नहीं देगा;
(ढ) देखें कक शाफ्ट, भिनज़, लैंडिगं या ककसी िी इनसेट के शीर्ष पर प्रदान की गई सिी बाड़
और गेट अपनी भस्िभत में ह;ैं
(र्) ककसी अनभधकृत व्यभक्त को बाड़ या गेट हटाने की अनुमभत नहीं देगा और यकद उसे ऐसी
बाड़ या गेट में कोई दोर् कदखाई दे, तो तरु ंत अपने िररष्ठ अभधकारी को सूभचत करेगा;
(त) शाफ्ट या इनसेट के शीर्ष और प्रत्येक डपंजरे के फशष को ढीली सामिी से मुक्त रखें;
(ि) जब लंबी लकड़ी, पाइप, रेल या अन्य सामिी डपंजरे या पररिहन के अन्य साधन के
ऊपर से भनकली हो उसे नीच े या ऊपर ककया जाता ह,ै तो सुभनभित करें कक भनकले हुए
भसरे रस्सी, जजं ीर या धनुर् से सुरभित रूप से बंधे हों;
(द) जब उसे संदहे होता ह ै कक डपंजरे शाफ्ट या भिनज़ म ें सुचारू रूप स े काम नहीं कर रह े ह ैं
या जब िह िाइंडिंग इंजन के काम करने के दौरान शाफ्ट या भिनज़ में कुछ िी[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 49
असामान्य होते हुए सुनता ह,ै तो तरु ंत िाइंडिंग इंजनमैन को इंजन बंद करने के भलए
संकेत दें।
(2) भपट टॉप पररचर-
(क) अपनी पारी के आरंि में देखें कक केप्स सही कायष भस्िभत में ह;ैं
(ख) जब उसे शाफ्ट में ककसी खतरे की जानकारी भमले, तो िह ककसी िी व्यभक्त को जांच या मरम्मत
के अलािा नीचे न आने दे और जब जाचं या मरम्मत का काम चल रहा हो, तो ड्यूटी पर रह े
और भसिल सनु ें; और
(ग) शाफ्ट से नीचे उतरने िाले ककसी िी व्यभक्त को कोई नशीला पेय या दिा ले जाने की अनुमभत
नहीं देना, या ककसी नशे में धुत व्यभक्त को नीचे उतरने की अनुमभत नहीं देना।
(3) जहां प्रबंधक भलभखत आदेश द्वारा ऐसा भनदेश देता ह,ै िहां भपट टॉप अटेंिेंट या बेलमैन, जैसा िी मामला
हो, भसिलमैन के कतव्यष ों का पालन करेगा।
(4) भपट टॉप पररचर अपना कायषस्िल तब तक नहीं छोड़गे ा जब तक कक उसका उत्तराभधकारी उसे कायषमुक्त न
कर दे।
49. हॉलजे इंजन ऑपरेटर और हॉलजे अटेंिटें , आकद के कतव्यष –
(1) अपनी पारी के प्रारंि पर हॉलेज इंजन ऑपरेटर इंजन की, उसके ब्रेक की और अपने िारसाधन के सब
साभधत्रों की परीिा करेगा और अपना समाधान करेगा कक िे यिोभचत चालू दशा में ह।ै
(2) अपनी पारी के दौरान हॉलेज इंजन ऑपरेटर हॉलजे इंजन और उसस े संबंभधत उपकरर् यिोभचत रूप म ें
साफ और तेलयुक् त और इंजन कि को साफ और ज् िलनशील सामिी से मुक् त रखेगा।
(3) हॉलजे इंजन ऑपरेटर इंजन, ब्रेक, िम, रस्स ी या अपने िारसाधन के अन् य साभधत्रों में कोई त्रुरट देखने पर
उसकी इंजीभनयर या इस प्रयोजन के भलए भनयुक् त अन् य सिम व् यभक्त को तरु न् त ररपोटष करेगा।
(4) जब िी हॉलेज इंजनमैन को इंजन छोड़ने का अिसर आए तो िह भिद्युतशभक्त काट देगा और इंजन को ब्रेक
से सुरभित कर देगा।
(5) हॉलजे इंजन ऑपरेटरऔर संकेतक, यिाभस्िभत, ककसी अप्राभधकृत व् यभक्त को इंजनकि में प्रिेश या ककसी
प्रकार से इंजन या भसग् नल म ें हस्त िेप नहीं करने देगा।
(6) हॉलजे इंजन ऑपरेटर और संकेतक संकेतों की भिभहत संभहता से पूरी तरह स्ि यं रूप से अिगत करेगा और
सतकषता से उसका पालन करेगा।
(7) हॉलजे इंजन ऑपरेटर इंजन को तब तक चालू नहीं करेगा जब तक िह ऐसा करने के भलए यिोभचत संकेत
प्राप्त नहीं कर लेता और यकद संकेत अस्प ष्ट ह ै तो हॉलजे इंजन ऑपरेटर इंजन को तब तक चालू नहीं करेगा
जब तक संकेत की पुनरािृभत नहीं होती और िह उसे स् पष्ट रूप से समझ नहीं लेता।
(8) हॉलेज समतल या आनभत के भशखर पर का िारसाधक व् यभक्त भशखर पर के अितरर् स्ि ल पर ककसी टब
को जाने देने के पूिष यह सुभनभित कर लेगा कक स् टॉप-ब् लॉक रास्त े को रोके हुए ह ैं और स्ट ॉप-ब् लॉक के खोले जान े
के पूिष टबों को एक दसू रे से और रस्स ी या जंजीर से सुरभित रूप में जुड़िाएगा। ककसी अनुकल् पी सुरिा साभधत्र
की व् यिस् िा की जाने की दशा में हॉलेज इंजन ऑपरेटर ऐसे प्रत्य ेक अिसर पर उसका उपयोग करिाएगा।50 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(9) हॉलजे इंजन ऑपरेटर ककसी व् यभक्त को ,जो ककसी हॉलेज समतल या आनभत पर के ककसी रूकने के स्ि ल
पर ककसी टब या टबों के सेट के हॉलेज रस्स ी से जुड़िाने का उत् तरदायी हो, यह सुभनभित करेगा कक ऐसे रूकन े
के स् िल पर या उस के पास जब रस्स ी गभत में हो, और कोई व् यभक्त खतरे की हालत में न रह।े
(10) ऐसे टबों या टबों के सेट का िारसाधक व् यभक्त, भजनका उस हॉलेज समतल या आनभत पर, भजस पर िैग
या बैक-स्ट े का प्रयोग अ पेभित हो, िेजना आशभयत हो, इसके पूिष कक टब या टबों का संिगष गभतमान ककया
जाए, िैग या बैक स् टे को सुरभित रूप में लगा या लगिा देगा।
(11) आनभत के भशखर या अधस्त र का िारसाधक व् यभक्त यह सुभनभित करेगा कक कोई अप्राभधकृत व् यभक्त
ककसी टब पर न चढे।
(12) पूिष इसके कक पाश्ि ष में झुकने िाले टबों की श्रृंखला गभतमान की जाए, शीर्ष पर प्रिािी व् यभक्त व् य यह
सुभनभित कर लेगा कक ऐसे सब टबों के सुरिा-प्रिाही यिोभचत सुरभित रूप से लगा कदया ह।ै
50. लोकोमोरटि ऑपरेटर के कतव्यष .- लोकोमोरटि ऑपरेटर-
(क) अपनी पारी में कायष प्रारंि करने से पूिष, यह सुभनभित कर लेगा कक लोकोमोरटि के श्रिर्गोचर
भसग् नल, बभत्तयों और ब्रके यिोभचत चालू दशा में ह;ै
(ख) जब तक लोकोमोरटि में पयाषप्त शीर्ष बभत्तयाँ न लगी हों तब तक उस को नहीं चलाएगा;
(ग) लोकोमोरटि की या उसके ककसी िाग की या उसकी ककसी कफटटंग की कोई त्रुरट देखने पर इंजीभनयर
या इस प्रयोजन के भलए भनयक्ु त सिम व् यभक्त को तुरन् त सूभचत करेगा;
(घ) जब तक ऐसे व् यभक्तयों को, भजनकी सुरिा जोभखम में पड़ सकती हो, श्रिर्गोचर चते ािनी नहीं दे दी
गई ह,ै तब तक लोकोमोरटि को गभतमान नहीं करेगा। िह श्रिर्गोचर चते ािनी उस समय िी देगा
जब लोकोमोरटि ककसी लेिेल क्रॉडसंग को या ऐसे स्ि ान के समीप पहुचँ रहा हो, जहाँ पर कोई व् यभक्त
कायष में लगा हुआ हो, या जहाँ चालक की दभृ ष्ट रूकती हो;
(ङ) लोकोमोरटि को उन स्ि ानों से दरू , जहाँ उन् ह ें रखा जाता ह,ै भबना देख-िाल के तब तक नहीं छोड़ेगा
जब तक उसने यह सुभनभित न कर भलया हो कक िह ककसी अप्राभधकृत व् यभक्त द्वारा गभतमान नहीं
ककया जा सकेगा;
(च) यह सुभनभित करेगा कक कोई अप्राभधकृत व् यभक्त लोकोमोरटि को न तो चलाए, न उसे संचाभलत करे
और न उस पर चढे; और
(छ) यह सुभनभित करेगा कक जब टब या िैगन लोकोमोरटि से सम् मुख ढकेले जा रह े हों तब शंटटंग करने
िाला व् यभक्त सबसे आगे के िगै न के साि रहगे ा।
51. कटटंग या लोडिगं मशीन ऑपरेटर और मकै ेभनक या कफटर के काम। - (1) जब ककसी मशीन को 5 में से 1
से ज़्यादा ढलान पर काम करना हो, तो मशीन को पीछे की ओर जान े से रोकन े के भलए एक असरदार तरीका
इस्तेमाल ककया जाएगा।
(2) ककसी िी कटाई या लोडिंग मशीन को कटाई या लोडिंग उपकरर् के चलते हुए नहीं भहलाया जाएगा या
ककसी और तरह से नहीं चलाया जाएगा, भसिाय कटाई या लोडिंग की िास्तभिक प्रकक्रया के, और अगर कटाई[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 51
या लोडिंग उपकरर् को, जसै ी िी भस्िभत हो, भगयर स े बाहर सरु भित तरीके से लॉक करना संिि न हो, तो
उसे भहलाना शुरू करने से पहले हटा कदया जाएगा।
(3) कोई िी व्यभक्त, कटाई या लोडिंग मशीन में तब तक कोई मरम्मत या समायोजन नहीं करेगा, न ही भपक
लगाएगा या भनकालेगा, जब तक कक व्यभक्त ने ऐसी व्यिस्िा न कर दी हो, भजससे ऐसा संचालन करते समय
तंत्र अनजाने में गभत में न आ जाए।
(4) कोई िी व्यभक्त ककसी कटटंग या लोडिंग मशीन के भिद्युत िाग के किर को न तो खोलेगा और न ही
बदलेगा, भसिाय ककसी इंजीभनयर, इलेभक्ट्रभशयन या इस प्रयोजन के भलए भनयुक्त अन्य सिम व्यभक्त की देखरेख
और उपभस्िभत में।
(5) लोडिंग मशीन ऑपरेटर-
(1) जब ककसी मशीन को 1 में 5 स े अभधक की चढाई पर चलाना अपेभित हो तो मशीन को पीछे िागने स े
रोकने के भलए ककसी प्रिािी प्रयुभक्त की व् यिस् िा और उसका उपयोग ककया जाएगा।
(2) काटने या लादने की िास्त भिक प्रकक्रया में होने के भसिाय कोयला काटन े या लादने िाली कोई मशीन
ककसी काटने या लादने के गभतमान औजार के साि सरकाई या अन् यिा गभतमान नहीं की जाएगी और यकद,
यिाभस्िभत, काटन े या लादन े के औजार को भगयर के बाहर सरु भित रूप स े रूि ककया जाना संिि नहीं ह ै तो
सरकाना प्रारंि करन े से पूिष उसे अलग कर कदया जाएगा।
(3) काटने या लादने की मशीन में कोई व् यभक्त तब तक न मरम् मत या समायोजन करेगा और न कोई भपक
उसमें लगाएगा या उससे भनकालेगा जब तक उसने ऐसी व् यिस् िा न कर ली हो जो ऐसी संकक्रया के भलए जात े
समय यंत्र को अनिधानता स े गभतमान होने स े रोक सके।
(4) कोई व् यभक्त काटने या लादने की मशीन के ककसी भिद्युतिाग का ढकना ककसी इंजीभनयर, इलेक् ट्रीभशयन
या इस प्रयोजन के भलए भनयुक् त सिम व् यभक्त की उपभस्िभत म ें और उसके पयषिेिर् में ही हटाएगा या कफर स े
लगाएगा, अन् यिा नहीं।
(5) लोडिंग मशीन चालक करेगा-
(क) अपनी भशफ्ट में काम शुरू करने से पहले लोडिंग मशीन चालक यह सुभनभित करेगा कक मशीन के श्रव्य
भसिल, रोशनी और ब्रेक उभचत कायष क्रम में हैं;
(ख) मशीन को तब तक काम नहीं करना जब तक कक मशीन में पयाषप्त हिे लाइट्स न लगे हों;
(ग) इस प्रयोजन के भलए भनयुक्त इंजीभनयर या अन्य सिम व्यभक्त को तत्काल सूभचत करें कक लोडिंग मशीन
चालक न े मशीन या उसके ककसी भहस्से या कफटटंग में कोई दोर् देखा है;
(घ) मशीन को तब तक चाल ू नहीं करना जब तक कक उसके द्वारा उन व्यभक्तयों को श्रव्य चते ािनी नहीं दी जाती
ह ै भजनकी सुरिा खतरे में पड़ सकती ह ै और जब मशीन लेिल क्रॉडसंग या ककसी ऐसे स्िान पर पहुचं रही हो
जहां कोई व्यभक्त काम कर रहा हो या जहां चालक की दभृ ष्ट को रोक कदया गया हो, तब तक मशीन को गभत म ें
नहीं लाया जाता ह;ै
(6) कटटंग या लोडिगं मशीन चालक मशीन को तब तक नहीं छोड़ेगा जब तक कक उसने मशीन को काटन े या
लोि करने िाली मशीन के चालक ने भबजली पूरी तरह से काट नहीं दी हो और खुद को आश्वासन कदया हो कक
मशीन के चलने िाल े भहस्सों को अनजान े में गभत में सेट नहीं ककया जाएगा।52 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(7) लोडिंग के दौरान मशीन ऑपरेटर अपने शरीर के ककनारे स े परे ट्रक, रटपर या िम्पर पर ककसी िी सामिी
को ओिरलोि या प्रोजेक्ट नहीं करेगा।
52. बारूदघर के िारसाधक के कतव्ष य .– बारूदघर का िारसाधक व् यभक्त :-
(क) िररष्ठ पदधाररयों के आदेशों के अधीन रहत े हुए, बारूदघर में भिफोटकों की यिोभचत प्राभप्त, उनके
िंिारकरर् और बारूदघर स े उनके भनगषम के भलए उत्त रदायी होगा;
(ख) खण्ि (क) के अधीन प्राप्त , िंिारकृत और भनगषभमत भिस्फ ोटकों के ऐस े अभिलेख रखेगा जो अभधभनयम,
भिस्फ ोटक अभधभनयम, 1884 (1884 का 4) और उनके अधीन बनाए गए भनयमों, भिभनयमों और आदेशों के
अधीन अपेभित हो;
(ग) सिं म व् यभक्त स े भिन् न ककसी व् यभक्त को भिस्फ ोटक नहीं देगा और जब भिस्फ ोटक बारूदघर में लौटा कदए
जाते ह ैं तो नया स्ट ॉक जारी करने से पहले उन् हीं को कफर से भनगषभमत करेगा;
(घ) इस प्रयोजन के भलए रखी गई भजल् दबि पृष्ठ संख् यांककत पुभस्तका में या पुनप्राषभप्त योग्य और गैर-संपादन
योग्य इलेक्ट्रॉभनक रूप में भिभिन् न सिम व् यभक्तयों के नाम और प्रत् येक को कदए गए भिस्फ ोटक की मात्रा और
प्रकृभत अभिभलभखत करेगा और उसी प्रकार प्रत् येक व् यभक्त द्वारा बारूदघर को लौटाए गए भिस्फ ोटकों की मात्रा
और प्रकृभत िी अभिभलभखत करेगा;
(ि.) सिम व् यभक्त को देने से पूिष प्रत् येक कनस्त र को सुरभित रूप में ताला लगाएगा और इसकी िी जाचँ
करेगा कक कनस्त र तालाबन् द दशा में बारूदघर को लौटाया जाता ह ै या नहीं, और िह ऐस े कनस्त र म ें
भिस्फ ोटक भनगषभमत नहीं करेगा जो उभचत मरम् मतशुदा हालत म ें नहीं ह ै या भजसे समुभचत रूप स े तालाबन् द
करना संिि नहीं ह;ै
(च) ककसी अप्राभधकृत व् यक्त् भााा को बारूदघर में प्रिेश नहीं करने देगा;
(छ) ककसी ऐसे भिस् फोटक को भनगषभमत नहीं करेगा भजसकी भनयत शेल्फ -लाइफ समाप्त हो चुकी हों; और
(ज) यकद उसको बारूदघर में भिस्फ ोटकों की कोई कमी का पता चलता ह,ै तो तत् काल प्रबंधक को भलभखत
रूप में सूभचत करेगा।
(झ) धूम्रपान की अनुमभत नहीं देंगा और रोशनी या िस्तुओं या ज्िलनशील प्रकृभत के पदािष या सहज प्रज्िलन
के भलए उत्तरदायी हों,या भजससे आग लगे, या आग या भिस्फोट का कारर् बनने या संचार करने के भलए जैस े
एभसि, पेट्रोभलयम, कैभल्शयम काबाषइि, संपीभड़त गैसें या ऐसे अन्य खतरनाक पदािष, या रेभियो या सेल फोन
या रेभियो फ्रीक्वेंसी संचाभलत उपकरर् या ऐसी ककसी िी संचार प्रर्ाली या उपकरर्ों को बारूदघर के 15
मीटर के िीतर ककसी िी समय अनुमभत दी नहीं देगा।
53. रभजस्टर कीपर और उपभस्िभत भलभपक आकद के कतव्यष –
(1) प्रत्येक व्यभक्त भजसे संभहता या इन भिभनयमों या इसके अधीन बनाए गए आदेशों के अंतगषत रखे जाने िाल े
रभजस्टरों या अन्य अभिलेखों को रखन े के भलए, या उनमें प्रभिभष्टयां करन े के भलए भनयुक्त ककया गया ह,ै िह
आिश्यक प्रभिभष्टयां स्याही से या पुनप्राषभप्त योग्य तिा गैर-संपादन योग्य इलैक्ट्रॉभनक रूप में करेगा।
(2) उस पूरे समय के दौरान जब व्यभक्त काम पर रहगें े, उपभस्िभत क्लकष उपभस्िभत केभबन में ड्यूटी पर रहगे ा,
भजसे कायषस्िलों के नजदीक या जमीन के नीचे काम करने के मामले में, काम करन े िाले व्यभक्तयों द्वारा ऐस े[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 53
कायषस्िल में प्रिेश करने और बाहर भनकलने के भलए इस्तमे ाल ककए जाने िाले आउटलेट या बायोमेरट्रक के पास
उपलब्ध कराया जाएगा।
(3) कोई िी व्यभक्त जो खान का कमषचारी नहीं ह ै या संभहता या भिभनयमों या उसके अधीन बनाए गए आदेशों
के अन्तगषत खान में प्रिेश करने का हकदार नहीं ह ै या प्रबंधक द्वारा ऐसा अभधकृत नहीं ह,ै खान में प्रिेश नहीं
करेगा।
(4) यह उपभस्िभत भलभपक का कतव्यष होगा कक यह सुभनभित करे कक ऐसा कोई व्यभक्त खदान में प्रिेश न करे
और यकद ऐसा कोई व्यभक्त जबरदस्ती खदान में प्रिेश करता ह,ै तो उपभस्िभत भलभपक तत्काल भलभखत रूप में
मामले की सूचना प्रबंधक को देगा।
(5) यकद भशफ्ट शुरू होने के बाद ककसी अभधकारी या सिम व्यभक्त ने संभहता की धारा 33 की उपधारा (ए) के
खंि (िी) के अंतगषत बनाए गए रभजस्टर या बायोमेरट्रक में अपनी उपभस्िभत दजष नहीं करिाई ह,ै तो संबंभधत
उपभस्िभत क्लकष भशफ्ट शुरू होन े के दो घंटे के अंदर भलभखत रूप में या मुख्य भनरीिक-सह-सुभिधाकताष द्वारा
भनधाषररत अन्य माध्यम से प्रबंधक या सहायक प्रबंधक या भशफ्ट के प्रिारी अन्य अभधकारी को इस त्य की
ररपोटष करेगा।
54. ट्रकों,रटप्प रों एि ं िम्प रों स े परे िारी अि ष मडु िगं मशीनररयों के प्रचालकों के कतव्ष य .– ककसी हिे ी अि ष
मुडिंग मशीनरी, यिा िैगलाईन, शॉिेल या एक् सकेिेटर, इत् याकद के प्रचालन के भलए प्राभधकृत प्रत्य ेक व् यभक्त :-
(क) अपनी िर्किंग भशफ्ट के प्रारंि में उसे सौंपी गई हेिी अि ष मडू िगं मशीन का भनरीिर् करेगा तिा इस संदि ष
में भिभनमाषता या आपूर्तषकताष के परामशष से इंजीभनयर द्वारा अनुबि भिभिध प्रर्ाभलयों, उप-प्रर्ाभलयों और
संरिात् मक यभु क्तयों की जाँच करेगा;
(ख) हिे ी अि ष मडू िगं मशीन ऑपरेटर मशीन को तब तक चलान े के भलए बाहर नहीं भनकालेगा और न ही उस े
चालू करेगा जब तक िह समाधान नहीं हो जाता ह ै कक िह (मशीन) यंत्रित् दरूु स्त और दितापूिषक चाल ू
हालत में ह;ै
(ग) खण् ि (क) के अधीन ककए गए प्रत् येक भनरीिर् का अभिलेख इस प्रयोजन से रखी गई एक भजल् दबि पृष्ठ
संख् यांककत पुभस्तका में या पुनप्राषभप्त योग्य और गैर-संपादन योग्य इलेक्ट्रॉभनक रूप में अनुरभित करेगा और
उसमें के प्रत्य ेक प्रभिभष्ट पर हस्त ािर/ ई-हस्तािर करेगा;
(घ) केभबन या इंजन कि और समस्त भखड़की के काँचों को साफ रखेगा;
(ि.) भ्रमर्-मागों, हिैं रेलों तिा सीढी-रास्त ों को अबि औजारों, स्न ेहक या अन् य सामािी से मुक् त रखेगा, जो
भगर सकते हों या रट्रडपंग का खतरा उत् पन् न कर सकते हों;
(च) ककसी अप्राभधकृत व् यभक्त को मशीन पर चढने की अनुज्ञा नहीं देगा;
(छ) मशीन को ऐसी भस्िभत में नहीं चलाएगा या प्रचाभलत करेगा, जब उसस े ऐसी भनकटता में व् यभक्त मौजदू
हों, जहाँ खतरा हो सकता ह;ै
(ज) गुजरते हुए हॉलजे यूभनट या लादे जा रह े यूभनट के केभबन के ऊपर बकेट को नहीं घुमाएगा;54 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(झ) मशीन को छोड़ने के पूिष बकेट को जमीन पर भस्िर करेगा, मशीन की भिद्यतु आपूर्तष को बंद करेगा, या
आकद-प्रितषक (प्राइम-मुिर) को बंद कर देगा तिा केभबन के पट पर ताला लगाएगा;
(ञ) मशीनरी के प्रचालन के दौरान भिभनयम 108 के अधीन बनाए गए कतषव् य संभहताओं का कड़ाई स े पालन
करेगा;
(ट) िारी अिषमूडिंग मशीनरी के ऑपरेटर संचालन के दौरान स्ियं मोबाइल फोन, इयरफ़ोन या ककसी िी
व्यभक्तगत इलेक्ट्रॉभनक उपकरर् का उपयोग नहीं करेंगे।
(ठ) अपने िर्किंग के अन् त में उसके उत् तरिती प्रचालक के अपेभित जानकारी के भलए, मशीन की दशा को खण्ि
(ग) के अधीन रखे गए रभजस्ट र या पुभस्तका में प्रभिष्ट करेगा।
55. ट्रक, रटपर और िम्पर सचं ालक के कतव्यष । -
(1) खान में ट्रक, रटप् पर और िम् पर चलाने के भलए प्राभधकृत प्रत्य ेक व् यभक्त :-
(क) अपनी िर्किंग के प्रारम् ि में उस े सौंपी गई मशीन का भनरीिर् करेगा तिा भिभिन् न प्रर्ाभलयों, उप-
प्रर्ाभलयों और संरिात् मक यभु क्तयों की जाँच करेगा;
(ख) मशीन को कायष के भलए तब तक बाहर नहीं भनकालेगा और न ही उसे चाल ू करेगा जब तक यह समाधान
नहीं हो जाता ह ै कक िह यंत्रित् दरूु स्त और दितापूिषक चालू हालत में ह ै
(ग) खण्ि (क) के अधीन ककए गए प्रत् येक भनरीिर् का अभिलेख इस प्रयोजन स े रखी गई एक भजल् दबि पृष्ठ
संख् यांककत पुभस्तका म ें या पनु प्राषभप्त योग्य और गैर-संपादन योग्य इलेक्ट्रॉभनक रूप में अनुरभित करेगा तिा
उसमें से प्रत्य ेक प्रभिभष्ट पर हस्त ािर करेगा;
(घ) अपने िारसाधनाधीन मशीन को अत् यभधक तेज नहीं चलाएगा, ध् यान-िंग से बचेगा और सुरिात् मक रूप
से चलाते हुए अन् य िाहन से आगे भनकलने का प्रयत् न तब तक नहीं करेगा जब तक कक िह दरू तक देखकर
आश् िस्त न हो जाए कक िह सुरभित आगे बढ सकता ह ैऔर ऐसा करन े के पूिष श्रिर्गोचर चेतािनी सकं ेत देगा;
(ि.) जब भस्ट्रडपंग या लोडिंग उपस्क र के समीप पहुचँ रहा हो, श्रिर्गोचर चेतािनी संकेत बजाएगा और
भस्ट्रडपंग उपस्क र के पार जाने का प्रयास तब तक नहीं करेगा जब तक कक उसे जिाब में उभचत ध् िभन संकेत न
भमल गया हो;
(च) ककसी सड़क या रेलिे लाइन को पार करन े स े पूिष ट्रक,रटप्प र और िम् पर की गभत को धीमा करेगा, सड़क
या रेलिे लाइन के दोनों तरफ देखेगा और तिी ट्रक,रटप् पर और िम् पर पार करेगा जब ऐसा करना सुरभित हो;
(छ) अन् धकोर् या ककसी अन् य भबन् द ु जहाँ स े व् यभक्त अचानक सामने आ सकत े ह ैं िहा ँ पहुचँ ते समय श्रिर्गोचर
चेतािनी संकेत बजाएगा;
(ज) ट्रक, रटप्प र या िम् पर को पीछे की ओर तब तक गभतमान नहीं करेगा जब तक उसके पीछे के िाग को
साफ-साफ न देख सके और ट्रक, रटप्प र या िम् पर को पीछे की ओर बढाने से पहल े श्रिनर्गोचर चते ािनी सकं ेत
देगा;
(झ) सुरंगों, तोरर्पिों और संयंत्र ढाँचों जसै े िेत्रों से होकर गुजरन े के पहले उसके मुक् तान् तर के बारे म ें
आश् िस्त हो लेगा;
(ञ) ट्रक, रटप्प र या िम् पर के संकक्रया के समय भिभनयम 107 के अधीन बनाए गए यातायात के भनयमों का
कड़ाई से पालन करेगा;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 55
(ट) अपने िर्किंग के अंत में उसके उत् तरिती प्रचालक के अपेभित जानकारी के भलए ट्रक या िम् पर की दशा को
खण्ि (ग) के अधीन रखे गए रभजस्ट र या पुभस्तका में प्रभिष्ट करेगा।
(2) चालक सुभनभित करेगा कक िाहन को अभतिाररत नहीं ककया ह ै और यह कक ट्रक, रटप्प र या िम् पर पर
सामिी इस प्रकार नहीं िरा हुआ हो भजससे िह िाहन के िैभतज ककनारों से बाहर भनकल गया हो और सामन े
या पीछे सामिी के बाहर भनकलने की भस्िभत में उसे कदन में लाल झण् िे तिा राभत्र में लाल प्रकाश द्वारा संकेभतत
ककया जाएगा।
(3) चालक ककसी अनाभधकृत व् यभक्त को उस िाहन पर चढने की अनुज्ञा नहीं देगा।
(4) ट्रकों, रटपरों या िंपरों के संचालक प्रबंधक द्वारा भनर्दषष्ट की जाने िाली पयाषप्त सािधानी बरते भबना कोहरे
या धुंध में िाहन का संचालन नहीं करेंगे।
(5) ट्रक, रटपर या िम्पर के ऑपरेटर िाइडिंग करते समय स्ियं मोबाइल फोन, इयरफ़ोन या ककसी िी
व्यभक्तगत इलेक्ट्रॉभनक उपकरर् का उपयोग नहीं करेंगे।56 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय – V
योजनाए ँ और अनिु ाग
56. खान नक्श ों के बारे म ें साधारर् अपिे ाए ँ –
(1) भिभनयमों के उपबन् धों के अनुसार तैयार या भनिेकदत ककया गया प्रत् येक नक् शा या सेक् शन:
(क) खान का और माभलक का नाम, और िह प्रयोजन भजसके भलए िह तैयार ककया गया ह,ै भिभनर्दषष् ट करेगा;
(ख) सिम पट्टा देन े िाले अभधकाररयों द्वारा कदए गए िू-कोभित खनन पट्टे के अनुसार खनन पट्टे की सीमा के
पररितषन डबंदओंु के िू-कोि दशाषया जाएगा |
(ग) ठीक उत् तर कदशा, या चबुं कीय मेररभियन और उसकी तारीख दर्शषत करेगा;
(घ) मुकद्रत योजनाओं और अनुिागों के मामले में, योजना का पैमाना कम से कम पच्चीस सेंटीमीटर लंबा और
उपयुक्त रूप से भििाभजत भनर्दषष्ट करें;
(ि.) जब तक अन् यिा उपबंभधत न हो, ऐस े मापमान के अनुसार होगा भजसका सूचक गुर्क -
(i) 2,000 : 1, उन खदानों के मामले में भजनमें बड़ी ओपनकास्ट िर्किंग ह ै और बड़े लीज़होल्ि एररया के सरफेस
प्लान के मामले में िी; और
(ii) 1,000 : 1, अन्य मामलों में:
परन् तु मख्ु य भनरीिक सह सभु िधाकताष भलभखत आदेश द्वारा और उन शतों के अधीन जो िह उसम ें
भिभनर्दषष् ट करे, नक् शों का ककसी अन् य यिोभचत मापमान से बनाया जाना अनुज्ञात या अपेभित कर सकेगा;
(च) भचरस्ि ायी कागज – पत्र, अनुरेखन कपड़ा या पॉभलस्ट र कफल् म, जो 100 माइक्रो गजे स े कम न हो,पर
उभचत रूप से स्याही या रंग से मुकद्रत ककया गया हो और अच् छी दशा में या गैर-संपादन योग्य भिभजटल प्रारूप
में रखा जाएगा;
(छ) ककसी िी खास भजयो रेफरेंस पॉइंट या लाइन या एररया के साि काम करने के संबंध में सिी काननू ी
पाबंकदयों का एक एब्स्ट्रैक्ट होना चाभहए, जसै ा िी मामला हो; और
(ज) योजनाओं और खंिों को मानक भिभजटल प्रारूप म ें तैयार, अनरु भित, संिहीत और अपलोि ककया जा
सकता ह,ै जैसा कक मुख्य भनरीिक-सह-सुभिधाकताष द्वारा समय-समय पर सामान्य आदेश द्वारा भनर्दषष्ट
ककया जा सकता ह।ै
(2) अनुसूची में कदखाए गए संकेत, इन भिभनयमों द्वारा अपेभित सब नक् शों और सेक् शनों को बनाने में प्रयुक् त
ककए जाएँगे।
(3) भिभनयमों द्वारा अपेभित नक् शे और सेक् शन िैसे त्रुरट-सीमा के अन् दर शुि होंगे, भजसे मुख् य भनरीिक सह
सुभिधाकता ष ककसी सामान् य या भिशेर् आदेश द्वारा भिभनर्दषष् ट करे। पररितषन डबंदओंु के िू-कोि को उपयुक्त
सिेिर् उपकरर्ों द्वारा सििे र् की गई योजनाओं और अनुिागों पर भचभह्नत ककया जाएगा|
(4) इन भिभनयमों द्वारा अपेभित योजनाओं और खिं ों को सही करके अद्यतन रखा जाएगा, जो कक खुली
खदान कायष के मामले को छोड़कर तीन महीने से पहले नहीं होगा, भजसके संबंध में यह पयाषप्त होगा यकद
योजनाओं को बारह महीने की अिभध के िीतर अद्यतन रखा जाता ह:ै[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 57
बशते कक जहां ककसी खदान या उसके िाग या खंि को छोड़ने, बंद करने या उसमें काम बंद करने या
पहुचं से बाहर करने का प्रस्ताि हो, तो योजना और खंि को ऐसे छोड़ने, बंद करने से पहले या समाभप्त के समय,
जैसा िी मामला हो, अद्यतन ककया जाएगा, जब तक कक ऐसा छोड़ना, बंद करना या समाभप्त माभलक, एजेंट या
प्रबंधक के भनयंत्रर् से बाहर की पररभस्िभतयों के कारर् न हुई हो, ऐसी भस्िभत में यह त्य कक योजना या खंि
अद्यतन नहीं ह,ै उस पर दजष ककया जाएगा I
(5) सतह पर सिी संदिष – स्ट ेशनों और िूभमगत सििे र् के संदिष भबन् दओंु को सिे ऑफ इंभिया के राष्ट्र ीय
भिि के सापेि में उनके सही अिभस्िभत में ऐसा दशाषया जाएगा, जो उप-भिभनयम (3) के अधीन भिभनर्दषष् ट
सिेिर् एिं आलेखन के त्रुरट-सीमा के अन् दर हो।
(6) नक् शे और सेक् शन एि ं भिभजटल िाटा भजनका रखा जाना इन भिभनयमों के अधीन अपेभित ह,ै खान के
कायाषलय में भनरीिर् के भलए उपलब् ध रहगें े तिा िेत्रीय भनरीिक-सह-सुभिधाकता ष द्वारा या उसके अनुमोदन स े
ही उन्ह ें िहां से हटाया जाएगा, जब तक कक उनकी सत्य प्रभतभलभप िहां न रखी गई हो।
(7) मुख् य भनरीिक सह सुभिधाकताष एक आदेश द्वारा और ऐसी शतों के अधीन जो िह उसमें भिभनर्दषष् ट करे,
इस भिभनयम के उपबंधों से भिन् न तरीके से नक् शों और सक्े शनों का बनाया जाना अनज्ञु ात कर सकता ह।ै
57. प्लान और सक्े शन का प्रकार।- (1) प्रत्येक खान का माभलक, अभिकताष या प्रबंधक भनम्नभलभखत नक् शा और
सेक्शन रखेगा:-
(क) सतह नक् शा, भजसमें स्िायी बेंचमाकष या भत्र-जंक्शन या राजस्ि स्तंि, खान सीमाओं के िीतर और सीमा
के बाहर 50 मीटर तक की प्रत्येक सतही भिशेर्ता, जसै े टेलीफोन, टेलीिाफ या भबजली पारेर्र् लाइन, जल
मुख्य,ट्राम-लाइन,रेलिे, सड़क, नदी, जलमागष, जलाशय, टैंक, बोरहोल, शाफ्ट और झुकाि
उद्घाटन,ओपनकास्ट काय,ष धसं ाि और सतह पर ििन शाभमल ह;ैं
(ख) िूभमगत नक् शा, भजसमें भनम्न भलभखत दशाषए जाएँगे :-
(i) िूभमगत खदान के कामकाज की भस्िभत;
(ii) प्रत्येक बोर होल और शाफ्ट गहराई सभहत, ढलान द्वार, िाइि, क्रॉस कट, भिनज़, रेज, खुदाई (स्िल िेत्र),
अभि-रोक या सील, जल बाधं (भनमाषर् के आयाम और अन्य भििरर् सभहत), शरर् कि, पडम्पंग स्टेशन,
ढुलाई सड़क और उसके साि जुड़ी प्रत्येक सुरंग और िायु मागष;
(iii) सतह पर ककसी िी संरचना के सहारे के भलए छोड़ा गया खभनज का हर स्तंि या ब्लॉक; और िूभमगत
पभत्रकाएँ, यकद कोई हों;
(iv) सीमाओं के अंदर प्रत्येक महत्िपूर्ष सतह भिशेर्ता, जसै े कक रेलिे, सड़क, नदी, धारा, जलमागष, टैंक,
जलाशय, खुली खदान काय ष और ििन जो िैभतज तल पर मापे गए कायष के ककसी िी भहस्से के 50 मीटर
के िीतर ह;ैं
(v) नसों, खाभड़यों, चट्टानों और खभनज भबस्तरों या जमाओं का सामान्य प्रहार;
(vi) भशराओं, खाभड़यों, भिभत्तयों और खभनज तलों या जमाि के ऐसे खंि जो उनकी मोटाई या चररत्र में कोई
पयाषप्त भिन्नता दशाषने के भलए आिश्यक हों और कायषशील खंि को दशाषते हों, और खदान में धंसे हुए या
भछकद्रत या बोटरंग द्वारा भसि ककए गए परतों के ऐसे खंि, जो उपलब्ध हों;
(vii) प्रत्येक िाशआउट, िाइक, फॉल्ट और अन्य िूगिीय गड़बड़ी की भस्िभत, उसके थ्रो और हिे की मात्रा और
कदशा के साि;58 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(viii) ककसी भनर्दषष्ट कायष के संबंध में सिी िैधाभनक प्रभतबंधों का एक सारांश, उन्ह ें लागू करने िाले आदेश के
संदिष में।
जब िी इस नक् शा को अपिेट ककया जाएगा, तो िर्किंग की मौजूदा जगह को िर्किंग के भसरों पर खींची गई
िॉटेि लाइन से कदखाया जाएगा और उस िॉटेि लाइन पर भपछले सिे की तारीख भलखी जाएगी:
मुख् य भनरीिक सह सुभिधाकताष भलभखत आदेश द्वारा और उसमें भनर्दषष्ट शतों के अधीन, खदान के
कामकाज की निीनतम भस्िभत कदखाने के ककसी अन्य तरीके को मंजूरी दे सकता ह।ै
(ग) शाफ्ट या शाफ्ट और मेन एभिट्स से होकर गुजरने िाले काम का एक आड़ा सेक्शन या सेक्शन, जो
अलग-अलग जगहों पर िेन, लोि, रीफ या भमनरल बेि या भिपॉभजट की सतह और गड्ढों को साफ तौर पर
कदखाते ह;ैं और खदान में धंस े हुए या खोद े गए या बोटरंग से साभबत ककए गए स्ट्रेटा के ऐसे सेक्शन, जो उपलब्ध
हो सकते ह।ैं
(घ) एक िर्टषकल माइन सेक्शन या सेक्शन जो माइन िर्किंग का िर्टषकल प्रोजेक्शन कदखाते ह,ैं जहाँ एक
रीफ, िेन, लोि या भमनरल बेि या भिपॉभजट का हॉररजॉन्टल से एिरेज 30 भििी से ज़्यादा भिप होता ह:ै
बशते कक खुली खदान िाली खदान के मामले में, खदान के कामकाज के ऊध्िाषधर उिारों को उपयुक्त
अंतराल पर, अनुदैध्यष और अनुप्रस्ि दोनों कदशाओं में 100 मीटर से अभधक नहीं, दशाषते हुए ऊध्िाषधर खदान
खंि तैयार ककए जाएंगे और भशरा, लोि, चट्टान या खभनज भबस्तर या जमा के उतार-चढाि पर ध्यान कदए
भबना बनाए रखे जाएंगे:
आगे यह िी प्रािधान ह ै कक िेत्रीय भनरीिक-सह-सुभिधाकताष की अनुमभत से और ऐसी शतों के अधीन,
जो उसमें भिभनर्दषष्ट की जा सकें, ऐसे खंि ककसी अन्य उपयुक्त भिमान के संबंध में तैयार ककए जा सकते ह;ैं
(ङ) एक िेंरटलेशन प्लान, और जहां आिश्यक हो िहा ं सेक्शन, जो खदान में िेंरटलेशन की व्यिस्िा को
कदखाता हो, और भिशेर् रूप से –
(i) िाय-ु प्रिाह की सामान्य कदशा;
(ii) प्रत्येक डबंद ुजहां हिा की मात्रा मापी जाती ह;ै
(iii) प्रत्येक एयर-क्रॉडसंग, िेंरटलेशन दरिाजा, स्टॉडपंग और हिा के भिभनयमन और भितरर् के भलए प्रत्येक
अन्य िेंरटलेशन भििाइस;
(iv) प्रत्येक अभि-शमन कि, यकद उपलब्ध हो;
(v) हर आग रोकने िाला और उसका सीररयल नंबर।
(vi) ज्िलनशील सामिी के िंिारर् के भलए उपयोग ककया जाने िाला प्रत्येक कमरा;
(vii) अभिशमन उपकरर्ों की भस्िभत;
(viii) प्रत्येक जल-बांध, भनमाषर् के माप और अन्य भििरर् के साि;
(ix) हर सम्प, पंडपंग, टेलीफोन और एम्बुलेंस स्टेशन, हर अंिरिाउंि मैगज़ीन; और
(x) प्रत्येक ढुलाई और यात्रा मागष;
(xi) प्रत्येक सहायक या बूस्टर पंखा;
(च) इस उप-भनयमन के खंि (क) और (ख) तिा उप-भनयम (6) और (7) के अतं गषत अपेभित ब्यौरे को दशाषन े
िाली एक संयुक्त सिेिर् योजना, भजस पर खान के सििे क और प्रबंधक के हस्तािर होंगे और साि िाली
खानों के िी प्रबंधक होंगे भजनकी सामान्य सीमा के 60 मीटर के िीतर या जहां सीमा भििादिस्त ह,ै[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 59
संबंभधत खान के माभलक द्वारा दािा की गई सीमा के 60 मीटर के िीतर कायष िेत्र ह,ै जो सामान्य सीमा
या भििाकदत सीमाओं, जैसी िी भस्िभत हो, की सत्यता को दशाषता ह ै और एक दसू रे के संबंध में काय ष ित्रे
की भस्िभत को िी दशाषता ह;ै
(छ) उपयुक्त पैमाने पर पट्टा िेत्र की िूगिीय योजना और उसका अनुिाग;
(ज) जल-खतरा योजना और अनिु ाग जो दशाषता हो-
(i) नाला, नदी, झील, जल तालाब, जल भनकास, जल भनकास या सतह पर या िूभम के नीचे खदान की सीमा
से 200 मीटर तक भिद्यमान कोई अन्य जल भनकाय;
(ii) िूभमगत कायषशील संरचना की भस्िभत तिा उससे जुड़ा प्रत्येक बोरहोल और शाफ्ट (गहराई सभहत),
िाइि, क्रॉसकट, भिनज़, राइज़, स्टेपल भपट, खुदाई और िायु मागष;
(iii) प्रत्येक िाइक, भ्रंश और अन्य िूगिीय भििोि की भस्िभत, उसके प्रिेप की मात्रा और कदशा के साि-साि
हिे ;
(iv) आसानी से पहचान े जा सकने िाले डबंदओंु पर िूभमगत कायों में भलए गए स्तर, जो सिी िाइि, मुख्य
शीर्ों और ढुलाई सड़कों के साि खंिों के भनमाषर् की अनमु भत देने के भलए पयाषप्त संख्या में हों;
(v) जल का प्रत्येक स्रोत जैसे नदी, नाला, जल-मागष, जलाशय, सतह पर जल-जमाि िाली खुली खदानें और
साि ही ककसी िी कदशा में मापे गए कायष के ककसी िी िाग के 60 मीटर के िीतर भस्ित िूभमगत समस्त
जल-जमाि िाली संरचनाओं की रूपरेखा;
(vi) हर तालाब, बांध या दसू रा स्ट्रक्चर, चाह े ज़मीन के ऊपर हो या नीचे, जो पानी का प्रेशर झेलने या पानी
के अंदर आने को कंट्रोल करन े के भलए बनाया गया हो, उसके भिज़ाइन और कंस्ट्रक्शन की दसू री भिटेल्स के
साि; और
(vii) इलाके का सबस े ज़्यादा बाढ का लेिल।
(2) जहां अलग-अलग रीफ, लोि, िेन्स या भमनरल बेि या भिपॉभजट एक-दसू रे के ऊपर या पैरेलल चलते
ह,ैं िहां हर रीफ, लोि, िेन्स या भमनरल बेि या भिपॉभजट का िर्किंग एक अलग प्लान या लॉभन्जट्यूभिनल
सेक्शन या सेक्शन पर कदखाया जाएगा; लेककन अगर दो रीफ, लोि, िेन्स या भमनरल बेि या भिपॉभजट एक-
दसू रे के ररलेशन में इस तरह से ह ैं कक उनमें ककए गए िर्किंग के बीच की दरू ी ककसी िी जगह पर दस मीटर स े
कम ह,ै तो ऐसे िर्किंग को िी, जैसा िी मामला हो, एक कंबाइंि प्लान या लॉभन्जट्यूभिनल सेक्शन पर अलग-
अलग रंगों में कदखाया जाएगा।
(3) (क) (i) उप-भिभनयमन (1) के खंि (क), (ख), (ङ), (च), (छ) तिा (ज) के अतं गषत अनरु भित योजनाओं
में सतही समोच्च रेखाएँ िी दशाषई जाएंगी, जो ऊध्िाषधर अंतराल पर पाँच मीटर से अभधक नहीं होंगी (या ऐसी
खदान के मामले में दस मीटर, जहा ं जमीन के नीचे कोई कायष नहीं हो रहा ह;ै या पहाड़ी िेत्र म ें भस्ित खदानों
के मामले में, ऐसा अन्य अंतराल, भजसकी अनुमभत िेत्रीय भनरीिक-सह-सुभिधाकता ष भलभखत आदेश द्वारा और
ऐसी शतों के अधीन, जैसी कक भनर्दषष्ट की जा सकती ह,ैं दी जाए) कायष के ककसी िी भहस्से के 50 मीटर के िीतर
आने िाले पूरे िेत्र पर।
(ii) सब-रेगुलेशन (1) के क्लॉज़ (ख ) के तहत रखे जाने िाल े प्लान में आस-पास की सिी खदानों के
ऊपर या नीचे के काम िी कदखाए जाएंगे, जो खदान माभलकों द्वारा दािा की गई बाउंिी के ककसी िी प्लेन
पर मापे गए 60 मीटर के अदं र ह।ैं इन कामों की जगह की जानकारी िी तीन महीन े के अंदर, या रेगुलेशन
56 के सब-रेगुलेशन (4) के तहत इजाज़त भमलने पर 12 महीने के अंदर अप-टू-िेट रखी जाएगी।
(iii) उप-भनयम (1) के खंि (ख) के अंतगषत रखे गए नक्शों पर, हर बार जब कामकाज को इस उप-
भनयम के खंि (ii) के प्रािधानों के अनुपालन में अद्यतन ककया जाता ह,ै तो प्रत्यके भनकटिती खदान के
सिेिक और प्रबंधक द्वारा हस्तािर ककए जाएंगे, भजनका कामकाज सामान्य सीमा के 60 मीटर के िीतर
(या जहां सीमा भििादिस्त ह,ै खदान के माभलक द्वारा दािा की गई सीमा के 60 मीटर के िीतर) ह,ै जो60 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
सामान्य सीमा या भििाकदत सीमाओं, जैसा िी मामला हो, की शुिता और एक दसू रे के संबंध में कामकाज
की भस्िभत को दशाषता ह।ै
(ख) हर खदान का माभलक, एजटें और मैनेजर अपने आस-पास की खदान के सिेयर को इस सब-
रेगुलेशन के तहत ज़रूरी सि े और लेिडलंग करने के भलए सिी ज़रूरी सभु िधाएँ देगा।
(4) उप-भिभनयमन (1) के खंि (ख) के अंतगषत बनाए गए नक्शों में काय ष स्िल के फशष पर भनम्नभलभखत डबंद ु
स्तर िी दशाषए जाएंगे-
a) हॉलेज रोििेज़ के साि, हर रोििे जंक्शन पर, उन रोििेज़ को छोड़कर जहाँ ट्राडमंग हाि से की जाती ह,ै
जहाँ स्पॉट लेिल 150 मीटर से ज़्यादा दरू पॉइंट्स पर नहीं कदखाए जा सकते; और
b) उन हडे िंग्स के मामले में भजन्ह ें टेम्पररी या परमानेंटली बदं कर कदया गया ह,ै ऐसी हडे िंग्स के आभखर में िी:
बशते कक जहां पत्िर में दो बहाि या अयस्क में दो बहाि एक दसू रे के ऊपर स े गुजरते ह,ैं उन्ह ें यकद
आिश्यक हो तो उभचत नोटटंग के साि नक्शे पर स्पष्ट रूप से दशाषया जाएगा।
(5) उप-भिभनयमन (1) के खंि (क) के अंतगषत बनाए गए नक्शे में खुली खदानों के भनमाषर् तिा ढुलाई सड़कों के
प्रत्येक बेंच के फशष पर पचास मीटर से अभधक अंतराल पर स्पॉट लेिल िी दशाषए जाएंगे।
(6) सतह पर एक स्िायी बचें -माकष स्िाभपत ककया जाएगा और ज़मीन के ऊपर और नीचे भलए गए सिी स्तरों
को ऐसे बेंच-माकष के संबंध में एक समतल पर िेजा जाएगा और बेंच-माकष का भििरर्, उसके भनदेशांकों और
औसत समुद्र तल से ऊँचाई या ऊंचाई के साि, इन भिभनयमों के अंतगषत बनाए रखे जाने िाले मानभचत्रों पर
कदखाया जाएगा।
(7) उप-भिभनयमन (1) के खंि (क) और (ख) के अंतगषत बनाए गए नक्शे में खदान की तय सीमा, या जहा ं
सीमा भििाद में ह,ै िहां खदान के माभलक और भििाकदत सीमा के समीप की खदानों के माभलकों द्वारा दािा की
गई सीमाएं िी कदखाई जाएंगी:
बशते कक जहा ं एक ही प्लान पर लीज़होल्ि की पूरी सीमा कदखाना मुमककन न हो, िहां एक एभिशनल
की प्लान या कोई दसू रा सही स्केल िी रखा जाएगा, भजसमें सीमा पॉइंट्स के कोऑर्िषनेट्स और िर्किंग की
आउटलाइन के साि ऐसी सीमाएं कदखाई जाएं।
(8) उप-भिभनयमन (1) के खिं (ख) के अंतगषत बनाए गए नक्शों में, खदान माभलकों द्वारा दािा की गई सीमा के
ककसी िी तल पर मापे गए 60 मीटर के अंदर भस्ित सिी सटे हुए खदानों के ऊपर और नीचे, उस खंि में
भिभनर्दषष्ट कायषप्रर्ाली तिा सिी भिशेर्ताएँ िी कदखाई जाएँगी।
(9) प्रत्येक खदान का माभलक, एजेंट और प्रबंधक जसै े ही उसका कामकाज बगल की खदान के साि तय सीमा
के 60 मीटर के अंदर फैलता ह ै (या जहां सीमा भििाद में ह,ै बगल की खदान के माभलक द्वारा दािा की गई
सीमा के 60 मीटर के अंदर) ऐसे भिस्तार के त्य के बारे में ऐसी खदान के माभलक, अभिकताष या प्रबंधक को
सूभचत करेगा और अपने बगल की खदानों के सिेिकों को इस उप-भनयम के तहत ककए जान े िाले आिश्यक
सिेिर् और समतलीकरर् करने के भलए सिी उभचत सुभिधाएं िी देगा।
(10)िेत्रीय भनरीिक-सह-सुभिधाकताष भलभखत आदेश द्वारा अपेभित होने पर -
(i) इन भिभनयमों के अतं गषत बनाए गए नक्शे और सेक्शन पर ऐस े अभतररक्त भििरर् कदखाने की आिश्यकता
होगी, या ऐसे भििरर् कदखाने िाली ऐसी अन्य प्लान और सेक्शन की तैयारी और रखरखाि ऐस े पैमान े
पर और ऐसे समय के िीतर ककया जाएगा जैसा कक आदशे में भनर्दषष्ट ककया जा सकता ह।ै भलभखत रूप में ;
और
(ii) माभलक, अभिकता ष या प्रबंधक को ऐस े समय के अन्दर ऐसे नक्शे तिा खण्ि, अििा उनके रेखाभचत्र प्रस्ततु
करने की आिश्यकता होगी, जैसा कक आदेश में भिभनर्दषष्ट ककया जा सकता ह।ै[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 61
(11) माभलक, अभिकताष या प्रबंधक, िेत्रीय भनरीिक-सह-सुभिधाकताष द्वारा अपेभित होन े पर, ककसी िी समय
ककसी नक्शे या खण्ि पर खान के कायषकरर् की तत्कालीन भस्िभत दशाषएगा।
58. खोलन,े छोड़न,े बदं करन े या बंद करन े स े पहल े जमा ककए जान े िाल े प्लान और सक्े शन। – (1) माभलक,
अभिकताष या प्रबंधक, रेगुलेशन 57 के सब-रेगुलेशन (1) के क्लॉज़ (क) के तहत तैयार ककए गए सरफेस प्लान
की एक कॉपी, भजसम ें खदान की सीमाएं और खदान के शाफ्ट और ओपडनंग, ट्राई-जक्ं शन या रेिेन्यू भपलर िी
कदखाए गए हों, माइडनंग ऑपरेशन शुरू होने के तीस कदनों के अंदर मुख्य भनरीिक-सह- सुभिधाकताष और
रीजनल भनरीिक-सह- सुभिधाकताष को जमा करेंगे।
(2) जहां कोई खदान, या खदान का कोई िाग, पररत्यक्त, बंद कर कदया गया ह ै या उसमें काम करना बंद कर
कदया गया ह,ै िहां पररत्याग, बंद करन े या समाभप्त के समय खदान का माभलक, पररत्याग या बंद करने के तीस
कदन के िीतर या काम बंद होने के 90 कदन के िीतर, जसै ा िी मामला हो, भिभनयमन 57 के उप-भिभनयम (1)
के खंि (क), (ख), (ग), (च), तिा (ज) के अंतगषत बनाए रखे गए खदान या िाग के कायष की अद्यतन नक्शे और
अनुिाग की दो सत्य प्रभतया ं मुख्य भनरीिक-सह-सुभिधाकताष को प्रस्तुत करेगा और ऐसी प्रत्येक प्रभतभलभप म ें
खदान के कम से कम एक शाफ्ट या उद्घाटन की कदशा और भतराहा या राजस्ि स्तिं या ककसी अन्य प्रमुख और
स्िायी सतही भिशेर्ता से दरू ी, जमीन के नीच े भनर्मषत सिी जल-बांधों की भस्िभत (उनके माप और भनमाषर् के
अन्य भििरर् के साि) और कायष के भसरों पर स्पॉट स्तर िी दशाषए जाएंगे:
बशते कक यकद स्िाभमत्ि में पररितषन पररत्याग, बंद करने या समाभप्त के बाद तिा पररत्याग या बंद करन े
के तीस कदन की समाभप्त या कामकाज की समाभप्त के नब्बे कदन की समाभप्त से पहले होता ह,ै जसै ा िी मामला
हो, ऐसी योजनाएं और खंि तत्काल प्रस्तुत ककए जाएंगे।
(3) अििा अपलोि की गई नक्शे तिा खण्ि की मूल अििा प्रमाभर्त सत्य प्रभतभलभप खदान भस्ित कायाषलय में
रखी जाएगी।
(4) मुख्य भनरीिक-सह-सुभिधाप्रदाता ऐसी शतों पर, भजन्ह ें िह ठीक समझे, तिा भनधाषररत प्रभतभलभपयाँ तैयार
करन े की लागत का िुगतान करन े पर, उप-भनयम (1) के अन्तगषत प्रस्ततु नक्शे या खण्ि की प्रभतभलभपया ँ या
उसके ऐसे िागों की, जसै ा िह ठीक समझे, आपूर्तष कर सकेगा -
a) ककसी िी व्यभक्त को खदान, भशराओं, खाइयों, चट्टानों तिा खभनज भबस्तरों या जमािों या खंि में
िास्तभिक भहत रखने िाला;
b) पास की खदान के माभलक, अभिकताष या प्रबंधक को।
59. सििे र् उपकरर् और सामिी.- (1) माभलक या अभिकता ष सिी सिेिर् और समतलीकरर् कायष करने के
भलए और इन भिभनयमों के अंतगषत अपेभित नक्शो योजनाओं और खंिों की तैयारी के भलए पयाषप्त संख्या में
सटीक और भिश्वसनीय सिेिर् उपकरर्, उपकरर् और सामिी उपलब्ध कराएगा;
(2) उप-भिभनयम (1) के अतं गषत उपलब्ध कराए गए सिेिर् उपकरर्ों की सटीकता के स्तर को बनाए
रखने के भलए भनयभमत अतं राल पर जांच, रखरखाि और अंशांकन ककया जाएगा।
60. नक्शा, सक्े शन और इंस्ूमटें की भलस्ट और उनका स्टोरेज।- (1) खदान में रखे गए सिी नक्शा और
सेक्शन, और उनकी ट्रेडसंग या कॉपी को सीररयल नंबर कदया जाएगा।
(2) प्रत्येक खान में प्रत्येक नक्शा और सेक्शन तिा सिी उपकरर्ों और सामभियों के उभचत िंिारर् और
रखरखाि के भलए उपयुक्त व्यिस्िा की जाएगी, ताकक इन भिभनयमों के अंतगतष प्रत्येक नक्शा और सेक्शन का
िौभतक रूप में रखरखाि या भिभजटल रूप में सुरभित फ्लटै िंिारर् की व्यिस्िा की जा सके :62 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
बशते कक जहां भिशेर् पररभस्िभतयां भिद्यमान हों, िहां मख्ु य भनरीिक-सह-सुभिधाप्रदाता भलभखत आदेश
द्वारा, आदेश में भिभनर्दषष्ट शतों के अधीन ककसी अन्य रूप में योजनाओं और अनुिाग के िंिारर् और रखरखाि
की अनुमभत दे सकता ह।ै
(3) प्रत्येक फील्ि बुक या इलेक्ट्रॉभनक फॉमष और इन भिभनयमों के अंतगषत अपेभित नक्शो और अनुिागों की
तैयारी म ें उपयोग ककए गए अन्य नोट्स को भिभधित अनुक्रभमत ककया जाएगा और खदान के कायाषलय में रखा
जाएगा।
(4) इन रेगुलेशंस के तहत मेंटेन ककए गए सिी नक्शो और सेक्शन्स की भलस्ट, या इसके तहत ककए गए
ककसी िी ऑिषसष, और उनकी ट्रेडसंग या कॉपीज़; रेगुलेशन 59 के तहत कदए गए सिी सिे इंस्ूमेंट्स की भलस्ट,
उनके टाइप स्पेभसकफकेशन्स और आइिेंरटकफकेशन नंबसष के साि; और सिी फील्ि बुक्स, भिभजटल िेटा का
रेफरेंस और सब-रेगुलेशन (3) के तहत रखे गए दसू रे नोट्स को एक बाउंि पेज्ि बुक या भिभजटल फॉमष में रखा
जाएगा, और जब िी ज़रूरी हो अपिेट ककया जाएगा।
(5) उप-भिभनयम (4) के अधीन रखे गए पुभस्तका में की गई प्रत् येक प्रभिभष्ट पर सिेिक द्वारा हस्त ािर/ई-
हस्तािर करके तारीख िाली जाएगी और प्रबंधक द्वारा प्रभतहस्त ािर/ई-प्रभतहस्तािर करके तारीख िाली
जाएगी।
61. सििे कों द्वारा योजनाओं की तयै ारी.- (1) इन भिभनयमों के अधीन तैयार की गई प्रत्येक नक्शा और
अनुिाग, तिा उसका अनरु ेखर् सिेिक द्वारा या उसके व्यभक्तगत पयषिेिर् में तैयार ककया जाएगा।
(2) सिेयर द्वारा या उसकी देखरेख में तैयार ककए गए हर नक्शा या सेक्शन, या उसके ककसी िी भहस्से पर
सिेयर का एक सर्टषकफकेट होगा कक नक्शा या सेक्शन या उसका भहस्सा सही ह;ै और उस पर साइन या ई-
साइन ककया जाएगा। और सिेयर द्वारा कदनांककत और प्रबंधक द्वारा प्रभतहस्तािररत या ई-हस्तािररत और
कदनांककत हर अिसर पर जब योजना या खंि को अद्यतन ककया जाता ह।ै
(3) ककसी नक्शा या सेक्शन या उसके ककसी भहस्से की हर ट्रेडसंग पर उस ओररभजनल नक्शा या सेक्शन या
भिभजटल िेटा का रेफरेंस होगा भजससे उसे कॉपी ककया गया िा और सिेयर द्वारा उस पर तारीख के साि
सर्टषफ़ाई ककया जाएगा, ताकक िह ओररभजनल नक्शा या सेक्शन की सही कॉपी हो। सर्टषकफ़केट पर उसके साइन
और तारीख होगी।
(4) यकद सिेिक कायष के ककसी िाग को कदखाने म ें भिफल रहता ह ै या छोड़ देता ह ै या योजनाओं या खंिों को
गलत होन े देता ह,ै तो िह इन भिभनयमों के उल्लंघन का दोर्ी होगा:
बशते कक इस उप-भनयमन में कुछ िी माभलक, अभिकताष या प्रबंधक को यह सुभनभित करने की उनकी
भजम्मेदारी स े छूट नहीं देगा कक इन भिभनयमों के तहत या इसके तहत ककए गए ककसी आदेश द्वारा तैयार, रखी
या जमा की गई या अपलोि की गई प्रत्येक योजना या अनुिाग सही ह ै और इसके तहत आिश्यक रूप स े
अद्यभतत रखा गया ह।ै
62. स्िाभमत्ि पररितनष या पनु ः खोलन े आकद पर योजनाओं की जाचँ की जाएगी - (1) जब ककसी खान के
स्िाभमत्ि में पररितषन होता ह,ै या जहाँ कोई खान या उसका िाग पुनः खोला जाता ह,ै या जहाँ ककसी खान या
उसके िाग में खभनजों के खिं ों या ब्लॉकों का भनष्कर्षर् या कटौती आरंि करने का इरादा ह,ै तो माभलक,
अभिकताष और प्रबंधक यह सभु नभित करेंगे कक खान या िाग की नक्शा और खंि सही ह:ैं
बशते कक अगर ककसी िी मामले में नक्शो और खंिों की सटीकता के बारे में कोई संदहे उत्पन्न होता ह,ै तो उस े
ककसी िी प्रकार की िाइि चलाने या भिकास या रोकने के संचालन या खंिों या खभनजों के ब्लॉकों के भनष्कर्षर्
या कटौती के अन्य कायष को शुरू करन े से पहले नए भसरे से सटीक नक्शो और खंि तयै ार करिाने होंगे।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 63
(2) यकद मुख्य भनरीिक-सह-सुभिधाप्रदाता या िेत्रीय भनरीिक-सह-सुभिधाप्रदाता की राय ह ै कक इन भिभनयमों
के अंतगषत तैयार की गई, रखी गई या प्रस्तुत की गई कोई नक्शा या खण्ि गलत ह,ै तो िह कारर् सभहत
भलभखत आदेश द्वारा, उसमें भनर्दषष्ट समय के िीतर नया सिेिर् कराने और नई नक्शा या खण्ि तैयार करने की
मांग कर सकता ह।ै
(3) अगर सब-रेगुलेशन (2) के तहत तैयार ककया जाने िाला नक्शा या सेक्शन, आदशे में बताए गए समय के
अंदर या मुख्य भनरीिक-सह- सुभिधाकताष या िेत्रीय भनरीिक-सह- सुभिधाकता ष की संतुभष्ट के भहसाब से तैयार
नहीं होता ह,ै या नक्शा या सेक्शन इन रेगुलेशन के तहत ज़रूरी तरीके से तैयार या अपिेट नहीं ककया जाता ह,ै
तो िह नक्शा या सेक्शन ककसी दसू री एजेंसी से तैयार करिा सकता ह;ै और इसका खचष, जसै ा कक मुख्य
भनरीिक-सह- सुभिधाकता ष सर्टषफाइि करेगा, खदान का माभलक देगा और उसस े लिैं रेिेन्यू के बकाए के तौर
पर िसूला जाएगा।64 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय – VI
प्रिशे और भनकास के साधन
63. खदान स े भनकलन े के रास्त।े – (1) शाफ्ट शाफ्ट की खुदाई या खान से प्रिेश या खदान से आने-जाने के
दसू रे तरीकों के इस्तेमाल और ज़रूरी िेिलपमेंट के काम के अलािा, ककसी िी व्यभक्त को ज़मीन के नीचे ककसी
िी काम पर नहीं रखा जाएगा, या काम के मकसद से अदं र आने या रहने की इजाज़त नहीं दी जाएगी, जब तक
कक काम में कम स े कम दो शाफ्ट या ढलान या ढलान या सतह पर दसू रे रास्ते न हों:
a) भजसके साि प्रत्येक खािी, चट्टान, नस या खभनज भबस्तर या जमा, या उसका खंि, जो कफलहाल
काम कर रहा ह,ै एक संचार ह ै ताकक िहां कायरष त व्यभक्तयों को प्रिेश और भनकास के अलग-अलग
साधन उपलब्ध हो सकें;
b) भजनकी सतह एक ही भबडल्िंग में नहीं ह;ै और
c) जो मैनेजर के अकेले कंट्रोल में ह:ैं
बशते कक मुख्य भनरीिक-सह- सुभिधाकताष , भलभखत आदेश देकर और उसम ें बताई गई शतों के तहत,
ज़मीन के नीच े लोगों को काम पर रखने की इजाज़त दे सकता ह,ै िले ही दोनों शाफ्ट, भिक्लाइन या आउटलेट
एक ही मैनजे र के कंट्रोल में न हों।
(2) मुख्य भनरीिक-सह-सुभिधाप्रदाता भलभखत आदेश द्वारा तिा उसमें भिभनर्दषष्ट शतों के अधीन रहते हुए,
सीभमत संख्या में व्यभक्तयों को िूभमगत रोजगार की अनुमभत दे सकेगा, िले ही खान के कायष स्िलों में प्रत्येक
कायष स्िल से बाहर भनकलने के दो रास्ते न हों।
(3) लोगों के आने-जाने के हर रास्ते से उतरन े और चढने के भलए सही इंतज़ाम ककए जाएगं े; और -
(क) जहां शाफ्ट ऊध्िाषधर ह ै और 60 मीटर से अभधक गहरा ह,ै ऐसी व्यिस्िा याभं त्रक
साधनों द्वारा इस प्रकार स्िाभपत और अनुरभित की जाएगी कक िह उपयोग के भलए
भनरंतर उपलब्ध रह:े
भलभखत आदेश द्वारा अपेभित हो, तो 60 मीटर से अभधक गहराई िाले शाफ्ट में िी उभचत िाइंडिंग
इंजन प्रदान ककया जाएगा, िले ही िह लंबित न हो।
(ख) जहां चढाई या ढलान एक ककलोमीटर (एक तरफ) स े अभधक हो और लोगों के भलए यात्रा करठन
हो, िहा ं मुख्य भनरीिक-सह-सुभिधाकता ष द्वारा अनुमोकदत उपयुक्त मानि-सिारी प्रर्ाली की
व्यिस्िा लोगों के खदान में आने-जाने के भलए की जाएगी:
बशते कक इस बारे में कोई संदेह हो कक खंि (क) अििा खंि (ख) में भनर्दषष्ट कोई व्यिस्िा उपयुक्त ह ै
अििा नहीं, तो इसे भनर्षय के भलए मुख्य भनरीिक-सह-सुभिधाकताष को िेजा जाएगा।
(4) लोगों के पररिहन के भलए आने-जाने के साधन तिा उनमें इस्तेमाल होने िाले उपकरर्, यात्रा को
आसान बनान े के भलए लगातार सुरभित हालत में रख े जाएंगे, भजसम ें हाि से ढोए जाने िाल े स्ट्रेचर के भलए
जगह िी शाभमल ह।ै
(5) जहा ं ककसी शाफ्ट में, सीकढयों का उपयोग खान में कायषरत व्यभक्तयों के प्रिेश अििा भनकास के साधन के
रूप में ककया जाता ह,ै िहां ऐसी प्रत्येक सीढी भिभनयम 69 में भिभनर्दषष्ट आिश्यकता के अनुरूप होगी।
(6) ऐसे शाफ्ट, भिक्लाइन या आउटलेट ककसी िी डबंद ु पर एक दसू रे से 15 मीटर से कम दरू ी पर नहीं होंगे,
और प्रत्येक को एक दसू रे के साि चलने योग्य मागष के माध्यम से जोड़ा जाएगा, जो कम से कम 1.8 मीटर ऊंचा
और 1.5 मीटर चौड़ा होगा, जो ऐस े शाफ्ट, भिक्लाइन या आउटलेट द्वारा सेिा प्राप्त ककए जा रह े िूभमगत काय ष
से होकर गुजरेगा:[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 65
(7) जब किी ऐस े दो भनकासों का संबंधक मागष, भजस े सब-रेगुलेशन (1) के तहत बनाए रखना ज़रूरी ह,ै रुका
हुआ हो या खतरनाक पाया गया हो, तो भसफ़ष ऐसे लोगों को ज़मीन के नीचे तब तक काम पर रखा जाएगा जो
रुकािट को हटान े या कनेक्शन के खतरनाक भहस्से की मरम्मत करने या नया दसू रा आउटलेट बनाने के भलए
ज़रूरी हों, जैसा िी मामला हो, जब तक संबंधक मागष पुन: खुल न जाए या दसू रे नए भनकास का प्रबंध न हो
जाए।
(8) शाफ़्टों , आनभतयों और भनकासों के संबंध में इस भिभनयमन के पूिषगामी प्रािधान लागू नहीं होंगे -
a) एक शाफ्ट जो िुबोया जा रहा ह ै या एक भनकासों जो बनाया जा रहा ह;ै
b) दो या दो से ज़्यादा शाफ़्ट, आनभतयों और भनकासों के बीच कनेक्शन बनाने के मकसद से ककए गए
ककसी िी काम के भलए; और
c) भमनरल की खोज या जाचं के भसफ़ष मकसद से काम करने के भलए: जब तक कक ककसी एक शाफ्ट
या भनकास के कनेक्शन में, ज़मीन के नीचे पूरे काम में ककसी िी समय 20 से ज़्यादा लोग काम पर
न हों।
बशते कक अगर डसंगल आउटलेट एक ऐसा शाफ्ट ह ै भजस पर चलना मुमककन नहीं ह ै (जो धंसा हुआ ह,ै
उसके अलािा) और उसकी गहराई 30 मीटर स े ज़्यादा ह,ै तो उसमें सीढी और लोगों को ऊपर-नीच े करने के
दसू रे तरीके कदए जाएंगे:
आगे यह िी प्रािधान ह ै कक इस उप-भनयमन में ककसी िी बात को िाइि ि रास्त े के भलए चलाने को
अभधकृत करने िाला नहीं माना जाएगा, जब तक कक उक्त प्रािधानों के अनुसार दसू रा भनकास नहीं बना कदया
गया हो।
(9) खदान म ें प्रिशे तिा भनकास के दोनों साधनों म ें दरू संचार प्रसारर् प्रर्ाली सभहत प्रिािी दोतरफा संचार
सुभिधाएं उपलब्ध कराई जाएंगी ताकक यह सुभनभित ककया जा सके कक िूभमगत िेत्र के लोग भबना ककसी बाधा
अििा संदेश एिं संचार संपकष के नकु सान के सीधे सतह पर संपकष कर सकें।
बशते कक ककसी खदान या उसके िाग के मामले में, भजस पर भिभनयम 153 लाग ू होता ह,ै इस प्रकार
प्रदत्त सचं ार और दरू सचं ार प्रर्ाली िायि,ष िायरलसे या ककसी अन्य प्रकार की होगी, जसै ा कक मख्ु य भनरीिक -
सह-सुभिधाकताष द्वारा अनुमोकदत ककया गया हो ।
64. कायशष ील शाफ्ट और भिनज़.- (1) खान के शाफ्ट के सिी प्रिेश द्वार कायष-अिभध के दौरान शुरू से अन् त
तक पयाषप्त रूप से प्रकाभशत रखे जाएँगे।
(2) उपयोग में आनेिाला या खुदाई के दौरान िाले प्रत्येक शाफ़्ट या भिन्ज़ तिा प्रत्येक ढलान या अन्य भनकास
सुरभित रूप में बनाया और रखा जाएगा।
(3) हर शाफ्ट, और हर भिनज़ या रेज़ भजसका इस्तेमाल िाइंडिंग या ढुलाई के भलए ककया जाना ह,ै उसे लकड़ी,
धातु, कंक्रीट या भचनाई की एक पक्की लाइडनंग दी जाएगी, जो ककसी िी समय शाफ्ट या भिनज़ के नीचे से छह
मीटर से ज़्यादा ऊँची नहीं होगी:
बशते कक जहा ँ लोहा या इस्प ात के टरंग पयाषप्त काष्ठ ािरर् के साि स्ि ायी आिरर् के नीच े प्रयुक् त ककए
जाते ह ैं और शाफ्ट के अधस्त ल के समीप रखे जात े ह ैं िहाँ यह फासला बीस मीटर स े ज़्यादा नहीं बढाई जा
सकती
आगे यह िी कहा गया ह ै कक उस शाफ्ट के बारे में जहाँ ऐसी भिशेर् दशाएँ ितषमान हों जो इस उप-
भिभनयम के उपबंधों का अनुपालन अनािश् यक बनाती हों िहाँ िेत्रीय भनरीिक, सह सुभिधाकताष भलभखत
आदेश द्वारा और उन शतों के अधीन जो िह उसमें भिभनर्दषष्ट करे, उनके प्रितनष से छूट दे सकता ह।ै66 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) सतही एिं ररसाि िाल े जल को इस प्रकार से भनकाला जाएगा कक िह शाफ्ट म ें स्ितंत्र रूप स े भगरने स े
रोका जा सके।
(5) प्रत्येक कायषशील शाफ्ट तिा उसके हौद के ऊपरी िाग, सिी इनसेट तिा भनचले िाग को खुली
सामिी, औजारों तिा मलबे से मुक्त रखा जाएगा।
65. भनकासों पर बाड़ ें और फाटक - (1) खान के सतह और भशखर से प्रत्य ेक प्रिेश द्वार, प्रत् येक चालू संिातन या
पंडपंग शाफ्ट के भशखर और अधस्त ल के बीच के सिी प्रिेश द्वार (हौदी सभहत, यकद कोई हो) ऐसे बाड़ से
सुरभित रखे जाएँगे, जो उस तरह से अभिकभल्पत और बने हों कक ककसी व् यभक्त के अनजाने में शाफ्ट में भगरने स े
या शाफ्ट में लगाए गए हभिस उपस् कर के ककसी चभलत िाग से संपकष में आन े से रोक सके।
(2) सतह से िूभम के नीच े की खनन स्ि लों के प्रत् येक पैदल प्रिेश द्वारा, पर एक दढृ फाटक की व् यिस् िा की
जाएगी और जब िूभम के नीचे कोई व् यभक्त न हों तब उसे ताला लगा कर बन् द रखा जाएगा :
बशते कक जहाँ ऐसा प्रिेश द्वार खान के अन् दर जाने या बाहर आन े के साधन के रूप में प्रयुक् त नहीं होता
ह ै िहाँ िह स्ि ायी रूप से बन् द कर कदया जाएगा, भजससे व् यभक्तयों का उसमें प्रिेश प्रिािी रूप से रोका जा
सके।
66. खदान के भहस्सों स े भनकलन े के रास्त।े - जहाँ िी साध्य हो, िहाँ खान के प्रत् येक िाग से सतह पर भनकलन े
के भलए, कम से कम दो रास्त ों का प्रबन् ध ककया जाएगा:
बशते कक इस भिर्य में कक ऐसे दो रास्त ों का प्रबंध करना साध् य ह ै या नहीं कोई संदेह उत् पन् न हो, तो िह
भिभनश् चय के भलए मुख्य भनरीिक सह सुभिधाकताष को िजे ा जाएगा, जो आभ़िरी और ज़रूरी होगा।
67. शाफ्ट, आनभत और अन्य भनकासों की भनयत-काभलक परीिा.–
(1) प्रत् यके शाफ्ट, आनभत या अन् य भनकास की, भजसका भिभनयम 63 की अपेिानसु ार व् यिस् िा की गई ह,ै
प्रत् येक सात कदनों में कम से कम एक बार खनन पयषिेिक या अन् य सिम व् यभक्त द्वारा परीिा की जाएगी और
ऐसी प्रत् येक परीिा की एक ररपोटष, तत् पश् चात ् तुरन् त, इस प्रयोजन के भलए रखी गई भजल् दबि-पृष् ठ संख् यांककत
पुभस्तका में या पुनः प्राप्त करने योग्य और गरै संपादनीय इलेक्ट्रॉभनक रूप म ें भलखी जाएगी और उस पर परीिा
करने िाले व् यभक्त द्वारा हस्त ािर करके तारीख िाली जाएगी।
(2) प्रत् येक यंत्रीकृत भनकास की प्रत् येक सात कदनों में कम से कम एक बार इंजीभनयर या भिद्युत पयषिेिक या
यांभत्रक पयषिेिक या इंजीभनयर द्वारा भलभखत रूप में सम् यक रूप से प्राभधकृत कोई अन् य सिम व् यभक्त द्वारा
परीिा की जाएगी और ऐसे प्रत् येक परीिा की ररपोटष तरु न् त इस प्रयोजन से रखी गई भजल् दबि पृष्ठ संख् यांककत
पुभस्तका में या पुनः प्राप्त करने योग्य और गैरसंपादनीय इलेक्ट्रॉभनक रूप में भलखी जाएगी और उस परीिा
करने िाले व् यभक्त द्वारा हस्त ािर कर तारीख िाली जाएगी।
(3) उप-भिभनयम (1) और (2) के अधीन भिद्युत पयषिेिक, यांभत्रक पयषिेिक या अन् य सिम व् यभक्त द्वारा इस
प्रकार रखे गए भजल् दबि पृष्ठ संख् यांककत पुभस्तकाएँ या पुनः प्राप्त करने योग्य और गैरसंपादनीय इलेक्ट्रॉभनक
रूप में रखे गए को, इंजीभनयर और प्रबंधक द्वारा िी जाचँ ी जाएगी तिा उस पर प्रभतहस्तािर या ई-हस्तािर
ककए जाएंगे।
(4) यकद परीिा के समय या ककसी अन् य समय शाफ्ट, आनभत या अन् य भनकास सरु भित नहीं पाया जाता, तो
जब तक कक िह भसिाय प्राकृभतक िायुमागष के रूप में, ककसी प्रयोजन के भलए सब प्रकार से सरु भित नहीं कर
कदया जाता तब तक िह प्रयोग में नहीं लाया जाएगा और ऐसी की हुई प्रत् येक कारषिाई की एक ररपोटष उप-
भिभनयम (1) के अधीन रखी गई पुभस्तका में भलखी जाएगी या इलेक्ट्रॉभनक रूप में दजष की जाएगी।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 67
68. सीढी का प्रािधान। -
(1) प्रत्येक शाफ्ट या डिंज और हिे भगयर, भजसमें खुदाई के दौरान का शाफ्ट या डिंज िी शाभमल ह,ै भजसका
झुकाि िैभतज (हॉररजॉन्टल) से 25 भििी स े अभधक ह,ै के भलए ऊपर स े नीचे तक सीढी की व्यिस्िा की
जाएगी।
बशते कक यकद कोई शाफ्ट या डिंज खोदा जा रहा हो, तो सीढी को तल से 20 मीटर से अभधक की दरू ी पर इस
प्रकार बनाया जा सकता ह ै भजससे भिस्फोट कायों के दौरान उसे खतरे स े बचाया जा सके, और इस डबंद ु स े
शाफ्ट या डिंज के तल तक एक चेन या रस्सी की सीढी लगाई जाएगी:
इसके अलािा, यकद मुख्य भनरीिक-सह-सुभिधाकता ष की राय ह ै कक इस उप-भिभनयम के प्रािधानों का अनुपालन
यिोभचत रूप से व्यािहाररक नहीं ह,ै तो िह भलभखत आदेश द्वारा और उसमें भनर्दषष्ट शतों के अधीन रहत े हुए,
इससे छूट प्रदान कर सकता ह।ै
(2) प्रत्येक कायषस्िल पर पैर जमाने के भलए प्लेटफॉमष या अन्य साधन उपलब्ध कराए जाएंगे, और जहा ं
आिश्यक हो, चढन े के भलए सीकढयाँ िी लगाई जाएंगी।
69. सीकढया.ँ - (1) खदान में इस्तेमाल होने िाली हर सीढी –
(क) मज़बूत बनािट की होगी;
(ख) उप भिभनयम (2) के भनयम के मुताभबक, शाफ्ट, डिंज़ या स्टॉप और हिे भगयर म ें हॉररजॉन्टल स े 80 भििी
से ज़्यादा झुकाि पर सुरभित रूप से लगी होगी;
(ग) एक जैसी बनी होगी या प्लेटफॉमष या सोलार को छोड़कर कहीं िी कोई ओिरलैप या ब्रके नहीं कदखेगा;
(घ) शाफ्ट, डिंज़, राइज़ या स्टॉप और हर प्लेटफॉमष के मुँह से कम स े कम एक मीटर ऊपर भनकली होगी,
भसिाय उन जगहों के जहाँ मज़बूत होल्िफास्ट या हिैं -रेल कदए गए हों;
(ङ) उसके िण् िे बराबर दरू ी पर होंगे और दीिार या काष्ठ से पयाषप्त फासले पर होंगे भजससे पैर रखने के भलए
उभचत आधार सुभनभित रह;े और
(च) अच् छी मरम् मतयुक् त दशा में रखी जाएगी। ।
(छ) हिे भगयर के मामले में ठीक से सुरभित रखा जाए।
(2) डसंककंग शाफ्ट या डिंज़ के सबसे भनचले 10 मीटर को छोड़कर, कोई िी सीढी हॉररजॉन्टल से 80 भििी स े
ज़्यादा के झुकाि पर नहीं रखी जाएगी:
बशते कक िेत्रीय भनरीिक-सह-सुभिधाकताष भलभखत आदेश द्वारा और उसमें भनर्दषष्ट शतों के अधीन रहते हुए,
सीढी को अभधक झुकाि पर स्िाभपत करन े की अनुमभत द े सकता ह।ै
70. सोलास ष िगरै ह का प्रािधान – (1) यकद भनयम 68 के उप-भनयम (1) के अंतगषत प्रदान की गई सीढी की
गहराई 20 मीटर स े अभधक हो और िैभतज स े उसका झुकाि 30 भििी स े अभधक हो, तो शाफ्ट या डिंज के तल
या ढलान के अनुकदश 15 मीटर अििा उस से कम अंतराल पर प्लेटफॉमष या सोलार प्रदान ककए जाएंगे।
(2) जहां िैभतज से झुकाि 60 भििी से अभधक हो, िहां प्लेटफॉमष या सोलर पैनल 10 मीटर से अभधक के
अंतराल पर नहीं लगाए जाएगं े।
(3) जहा ं िी आिश्यक हो, हिे भगयर के भनरीिर् और रखरखाि के भलए गािष के साि प्लेटफामष या सोलासष की
व्यिस्िा रूप में की जाएगी।
(4) अगर ककसी प्लेटफॉमष पर ककसी शाफ्ट या डिंज़ में मैनहोल कदया गया ह,ै तो उसे प्लेटफॉमष से ऊपर जाने
िाली सीढी के पीछे रखा जाएगा।68 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) लकड़ी या दसू रे सामान को हिैं ल करने के भलए कदए गए प्लेटफॉमष में हर ओपडनंग को बाकी प्लेटफॉमष स े
अच्छी तरह बंद ककया जाएगा।
71. सीढी के रास्तों की सरु िा। -
(1) िाइंडिंग या अन्य प्रयोजनों के भलए उपयोग ककए जान े िाल े शाफ्ट या डिंज में प्रत्येक सीढी अलग
कम्पाटषमेंट में होनी चाभहए या अन्य कम्पाटषमेंट से पयाषप्त रूप से सुरभित होनी चाभहए
(2) ककसी िी ऐसे स्िान या सड़क के नीचे भस्ित प्रत्येक सीढीनुमा मागष, जहाँ लोग खड़े हों या गुजरते हों, पर
उपयुक्त आिरर् या मजबूत बाड़ या गािष के साि प्रदान ककया जाएगा ।
72. सीढी िाल े रास्तों पर सामान ल े जाना। - कोई िी व्यभक्त भिल, टूल, एक्सप्लोभसि या कोई िी ढीला
सामान ककसी शाफ्ट या डिंज में सीढी पर नहीं ल े जाएगा या ल े जान े की इजाज़त नहीं दी जाएगी, भजसका
झुकाि हॉररजॉन्टल स े 45 भििी से ज़्यादा हो, भसिाय इसके कक ररपेयर करने के भलए ऐसा करना ज़रूरी हो:
बशते कक इस रेगुलेशन में कुछ िी ककसी व्यभक्त को भिल, टूल या एक्सप्लोभसि को ककसी सही डस्लंग या कंटेनर
में ले जाने स े नहीं रोकेगा जो उसके शरीर से बन्धे हो।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 69
अध्याय- VII
शाफ्टों म ें िाइंडिंग
73. िाइंडिगं इंजन ऑपरेटर की भनयभु क्त - (1) ककसी िी व्यभक्त को िाइंडिंग इंजन ऑपरेटर के रूप में भनयुक्त
नहीं ककया जाएगा जब तक कक उसके पास िाइंडिंग इंजन ऑपरेटर का प्रमार् पत्र (पूिष में इंजन िाइिर के
प्रमार् पत्र के रूप में जारी ककया गया) न हो:
बशते कक यह उप-भिभनयम तीस अश् िशभक्त (30HP) तक के भिद्युत िाइंडिंग इंजन या िाष् प या संपीभ ित िाय ु
के ऐसे िाइंडिंग इंजन के, भजसमें अठारह सेन् टीमीटर स े अनभधक व् यास के भसडलंिर हों और जो व् यभक्तयों को
उठाने या उतारने के भलए प्रयुक् त नहीं होता, चालक को लागू नहीं होगा:
बशते यह और कक इन भिभनयमों के लागू होने के बाद मेटल माइंस रेगुलेशन, 1961 के भिभनयम 12 के अधीन
प्रदत् त ककसी प्रिम या भद्वतीय श्रेर्ी इंजन चालक के प्रमार्-पत्र में से प्रत् येक को इन भिभनयमों के भिभनयम 4 के
अधीन िी एक िाइंडिंग इंजन ऑपरेटर प्रमार्-पत्र प्रदत् त ककया हुआ समझा जाएगा।
(2) जहाँ ऐसी भिशेर् करठनाइयाँ भिद्यमान हों भजनके कारर् उप-भनयम (1) के उपबन्धों का अनुपालन
युभक्तसंगत रूप से व्यािहाररक न हो, िहाँ मुख्य भनरीिक-सह-सुभिधाकताष भलभखत आदेश द्वारा तिा उसम ें
भिभनर्दषष्ट शतों के अधीन रहते हुए उक्त उपबन्धों में छूट दे सकेगा।
(3) उप-भिभनयम (1) के अधीन भनयुक् त िाइंडिंग इंजन ऑपरेटर के भसिाय कोई व् यभक्त िाइंडिंग इंजन को
नहीं चलाएगा :
बशते कक िाइंडिंग इंजन ऑपरेटर की देख -रेख में भिभधित रूप से भनयुक्त कोई अन् य सिम व् यभक्त, मैन
िाइंडिंग के अलािा , अन्य उद्देश्य से िाइंडिंग इंजन चलाने के भलए अनुज्ञात ककया जा सकेगा ।
बशते कक ककसी आपात भस्िभत में कोई अन् य सिम व् यभक्त िाइंडिंग इंजन चलाने के भलए अनुज्ञात ककया
जा सकेगा ।
(4) कतषव् यारूढ िाइंडिंग इंजन ऑपरेटर का नाम, उसकी पारी की कालािभध के साि िाइंडिंग इंजन के कमरे
में लगा कदया जाएगा:
बशते कक जहा ँ िेत्रीय भनरीिक सह सुभिधाकताष की यह राय हो कक ककसी िाइंडिंग इंजन ऑपरेटर के
कतषव् य बहुत दष्ु क र ह,ैं िह भलभखत आदेश द्वारा उसकी पारी की कालािभध घटा कर पांच घंटे करन े की मांग कर
सकता ह ै या भनर्दषष्ट कर सकता ह।ै
74. नए िाइंडिगं सस्ं ि ापन - (1) जब व्यभक्तयों को उतारने और चढाने के भलए ककसी नए िाइंडिंग संस्ि ापन
को उपयोग में लाने का इरादा हो, तो माभलक, अभिकताष या प्रबंधक ऐसे उपयोग से कम से कम तीस कदन पहल े
मुख्य भनरीिक-सह-सभु िधाकताष और िेत्रीय भनरीिक-सह-सुभिधाकताष को ऐस े प्रपत्र में उस इरादे की सूचना
देंगे, जैसा मुख्य भनरीिक-सह-सुभिधाकता ष द्वारा समय-समय पर सामान्य या भिशेर् आदेश के माध्यम स े भनर्दषष्ट
ककया जाए, भजसमें उस इंस्टालेशन का भिस्तृत भििरर् शाभमल होगा।
(2) ककसी िाइंडिंग इंजन को, भजसे उसी खदान में एक स्िान से दसू रे स्िान पर अििा एक खदान से दसू री
खदान में स्िानांतररत ककया जाता ह,ै इस भिभनयमन के प्रयोजनािष नया संस्िापन माना जाएगा ।
कोई िाइंडिंग इंजन भजसे एक ही खान के एक स्ि ान से दसू रे स्ि ान पर या एक खान से दसू रे खान में
स्ि ानान् तररत ककया जाता ह,ै इस भिभनयम के प्रयोजन से उसे एक नया संस्ि ापन समझा जाएगा।
(3) यकद मुख्य भनरीिक-सह- सुभिधाकता ष ककसी आदेश द्वारा ऐसी आिश्यकता जताते ह,ैं तो उस इंस्टालेशन में
ऐसे सुधार या पररितषन ककए जाएंगे, जो उस आदेश में भनर्दषष्ट ह ै ।70 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
75. िाइंडिंग उपकरर् का भनमार्ष और सस्ं िापना। – (1) िाइंडिंग संस्ि ापन का प्रत् येक िाग हिे भगयर सभहत,
ठीक से बना और पयाषप्त दढृ होगा और भनरापद चालू हालत में रखा जाएगा और उक्त के भिर्य में ककसी संदेह
की दशा में िह भिभनश् चय के भलए मुख्य भनरीिक-सह-सुभिधाकताष को भनदेभशत की जाएगी।
(2) (क) प्रत्येक िाइंडिंग इंजन को एक ऐसे इंजन कि में रखा जाएगा जो सफेदी ककया हुआ हो और भजसम ें
आपातकालीन भनकास, पयाषप्त प्रकाश, िेंरटलेशन और ऑपरेटर के भलए एगोनोभमक रूप से भिज़ाइन की गई
सीट की सुभिधा उपलब्ध हो।
(ख) इंजन एक मजबूत नींि से मजबूती के साि जुड़ा होना चाभहए और उसे इस प्रकार भिजाइन, भनर्मषत और
व्यिभस्ित रखा जाना चाभहए कक उपलब्ध शभक्त के साि, व्यभक्तयों या सामभियों को ऊपर ल े जान े और नीच े
उतारन े का काय ष आसानी, भनयभमतता और सुरिा के साि ककया जा सके।
(ग) इंजन फ़ाउंिेशन, ब्रेक असेंबली आकद के भनरीिर् के भलए पयाषप्त पहुचँ की व्यिस्िा की जाएगी और उस े
बनाए रखा जाएगा।
(3) जब तक मुख्य भनरीिक-सह-सुभिधाकताष द्वारा भलभखत रूप में अन्यिा अनुमभत न दी जाए और उसम ें
भनर्दषष्ट शतों के अधीन रहते हुए, िाइंडिंग के भलए प्रत्येक इंजन को हिे भगयर के संबंध में इस प्रकार भस्ित ककया
जाएगा कक िाइंडिंग रस्सी,चरम भस्िभत में, रस्सी के साि उपयोग ककए जाने िाले शीि या पुली के तल के साि
ककसी िी कदशा में समान, िढे भििी से अभधक का एकसमान कोर् न बनाए।
(4) िाइंडिंग इंजन के िम या शीव्स, और िाइंडिंग के संबंध में उपयोग ककए जाने िाले पुली और शीव्स का
व्यास जब तक कक मुख्य भनरीिक-सह-सुभिधाकताष द्वारा अन्यिा अनुमभत न दी गई हो और उसमें भनर्दषष्ट शतों
के अधीन—11 माचष, 1961 से पहले स्िाभपत िाइंडिंग इंस्टालेशन के मामले में रस्सी के व्यास के 80 गुना स े
कम नहीं होगा, और अन्य मामलों में रस्सी के व्यास के 100 गुना स े कम नहीं होगा:
बशते कक मुख्य भनरीिक-सह-सुभिधाकताष, भलभखत आदेश द्वारा यह अपेिा कर सकते ह ैं कक उक्त भतभि स े
पहले स्िाभपत ककसी िी भनर्दषष्ट िाइंडिंग इंस्टालेशन के मामले में, उक्त िम, पुली या शीव्स का व्यास उस
आकार स े कम नहीं होगा, जो आदेश में भनर्दषष्ट ककया गया ह।ै
इसके अलािा, बशते कक जहा ँ ऐसी भिशेर् करठनाइयाँ मौजूद हों भजनके कारर् इस भिभनयम के
प्रािधानों का अनुपालन करना उभचत रूप से व्यािहाररक न हो, िहाँ मुख्य भनरीिक-सह-सुभिधाकताष, भलभखत
आदेश द्वारा और उसमें भनर्दष्टष शतों के अधीन, उक्त प्रािधानों में ढील दे सकते ह।ैं
(5) िाइंडिंग संस्ि ापन में प्रयुक् त शीिों या पुभलयों के खाचं े रस्स ी के व् यास के अनरूु प होंगे।
(6) िाइंडिंग के संबंध में प्रयोग में लाई जानेिाली प्रत्येक भघरनी या शीि, गभतमान रहने के समय, उध् िाषकार
भस्िभत में घमू ेगी तिा उसे ऐसी भस्िभत में बनाए रखा जाएगा कक कफसलन न्यूनतम हो जाए।
76. िाइंडिगं इंजनों की कफटटंग।- (1) प्रत्येक शाफ्ट पर, भजसमें डसंककंग/खुदाई की प्रकक्रया के अधीन शाफ्ट िी
शाभमल ह,ै जहाँ इंजन के माध्यम से िाइंडिंग की जाती ह,ै िहाँ िाइंडिंग इंजन से संबंभधत उप-भिभनयम (2) से
उप-भिभनयम (10) के प्रािधान लागू होंगे।
(2) िम पर ऐस े बाहर को भनकल े ककनारे होंग े और यकद िम शंकु आकार या सर्पलष आकार का हो तो ऐस े
अन् य साधन िी होंगे जो रस्स ी को कफसलने या असमान रूप से कुंिभलत होन े से रोकने के भलए पयाषप्त होंगे।
(3) घर्षर् िाइंिर के भसिाय, रस्स ी का छोर सुरभित रूप में इस िांभत बाँधा जाएगा कक रस्स ी अनुभचत रूप स े
डखंच न जाए।
(4) जब डपंजर या अन् य प्रिहर्-साधन शाफ्ट में काम करने के सबस े नीचे भबन् द ु पर हों, तो िम पर रस्स ी के
कम से कम दो लपेट होंगे।
(5) (क) िम या िम-शाफ्ट पर एक स े अभधक स्ितंत्र ब्रेक उपलब्ध कराए जाएंगे, जो:[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 71
(i) यकद दो केज या पररिहन के अन्य साधन हों, तो दोनों म ें से ककसी िी कदशा में ज़्यादा से ज़्यादा टॉकष लगन े
पर िे केज या आने-जाने के दसू रे साधन अलग-अलग रहगें े; और
(ii) यकद डपंजर या अन् य प्रिहर्-साधन एक ही हो, तो लदे हुए डपंजर या अन् य प्रिहर्-साधन को साफ्ट के
मध् य में उस समय रोके रह े जब अभधकतम टॉकष नीचे की ओर लगाई जाए।
(ख) कम से कम एक ब्रेक इस प्रकार बना होगा कक ब्रेक उस समय के भसिाय जब िह चलाया जा रहा हो
‘’चालू’’ की दशा में रह।े
(ग) जहाँ ब्रेक या ब्रेक्स पािर-ऑपरेटेि हों, उनमें से कम से कम एक ब्रेक को इस तरह व्यिभस्ित ककया जाएगा
कक भबजली या शभक्त की आपर्ू तष भिफल होने पर िह हर समय स्िचाभलत रूप से लग जाए।
(घ) िम पर लगे ब्रेक का उपयोग केिल उस िम को भस्िर रखन े के उद्देश्य से ककया जाएगा, न कक केज या
पररिहन के अन्य साधनों को नीच े उतारन े के भलए; उन मामलों को छोड़कर जहाँ इंजन को बहुत धीमी गभत स े
चलाया जाना हो, जैसे कक िाइंडिंग रस्सी, शाफ्ट या डिंज का भनरीिर् करते समय।
(6) जहाँ िाइंडिंग इंजन स्ट ीम या संपीभित िायु स े चलता ह,ै िहा ँ स्क्र ू स्ट ॉप-िाल्ि इंजन के भनयंत्रक-िाल्ि के
रूप में प्रयुक् त नहीं होगा।
(7) प्रत्येक इंजन एक भिश्वसनीय िेप्ि-इंभिकेटर (रस्सी पर ककसी िी भनशान के अभतररक्त) से सुसभित होगा,
जो िाइंडिंग इंजन ऑपरेटर को शाफ्ट या डिंज में केज या पररिहन के अन्य साधनों की भस्िभत कदखाएगा। साि
ही, एक स्िचाभलत उपकरर् िी होगा जो इंजन रूम में घंटी बजाएगा जब ऊपर की ओर आता हुआ केज या
पररिहन का साधन शाफ्ट के शीर्ष से िम के कम स े कम दो चक्कर की दरू ी पर हो।
(8) उप-भिभनयम (7) में संदर्िषत गहराई सचू क यंत्र िाइंडिंग रस्स ी के प्रत्य ेक समायोजन या प्रभतस्ि ापन के बाद
जाँची जाएगी।
(9) घर्षर् िाइन्िर को छोड़कर, एक उपयुक्त स्िचाभलत स्लैक रोप प्रोटेक्शन भििाइस स्िाभपत ककया जाएगा।
10) िाइंडिंग इंजन में एक “िेि मैन भस्िच” प्रदान ककया जाएगा।
77. शाफ्ट कफटटंग्स.- (1) प्रत्येक िाइंडिंग शाफ्ट पर—डसंककंग/खुदाई की प्रकक्रया के अधीन शाफ्ट को छोड़कर,
भजस पर भिभनयम 81 के प्रािधान लाग ू होंगे—उप-भिभनयम (2) से उप-भिभनयम (11) के प्रािधान प्रिािी
होंगे।
(2) (क) शाफ्ट या डिंज के शीर्ष के बीच अलग, स्पष्ट और भनभित संकेतों के आदान-प्रदान के भलए दो स्ितंत्र
और कुशल साधन प्रदान ककए जाएंगे और बनाए रखे जाएंगे और –
(i) शाफ्ट का अधस्त ल या उतरने के अन् य स् िायी स्ि ान; और
(ii) तत् समय उपयोग में आनेिाली, प्रत् येक इनसेट, और उन प्रर्ाभलयों में से एक भिद्युत साधनों द्वारा होगी।
(ख) शाफ्ट के भशखर से िाइंडिंग इंजनमैन को ऐसे सकं ेतों के पारेर्र् के भलए िी दि साधनों की
व् यिस् िा की जाएगी और उन् हें बनाए रखा जाएगा और सब संकेत यांभत्रक या भिद्यतु साधनों के द्वारा सम् प्रेभर्त
ककए जाएँगे;
(3) संकेत देने में, संकेतों की भनम्न भलभखत संभहता का प्रयोग और सख्ती के साि अनपु ालन ककया जाएगा :-
एक रैप : रोको जब इंजन गभतमान हो
दो रैप : उठाओ जब इंजन रुका हुआ हो
तीन रैप : उतारो
चार रैप : व् यभक्त चढने या उतरने के भलए तैयार ह ै
चार रैप : उत् तर म ें व् यभक्त डपंजर या अन् य प्रिहर् साधन में प्रिेश कर सकत े ह:ैं72 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
बशते कक कोई अन् य संकेत पूिषगामी संकेतों के अभतररक् त होंगे और उनमें हस्त िेप नहीं करेंगे।
मुख्य भनरीिक-सह-सुभिधाकताष, भलभखत आदेश द्वारा और उसमें भनर्दषष्ट शतों के अधीन, ऊपर भनर्दषष्ट
कोि के अलािा ककसी अन्य भसिडलंग कोि के उपयोग की अनुमभत दे सकते ह।ैं
(4) संकेतों की संभहता की मकु द्रत प्रभत अंिेजी, डहदं ी और अभधकतम श्रभमकों द्वारा समझी जान े िाली िार्ा म,ें
भजसमें अभतररक्त सकं ेत, यकद कोई हो, शाभमल हों, शाफ्ट के शीर् ष पर और प्रत्येक ऐसे इनसेट और लैंडिंग पर
तिा िाइंडिंग इंजन कि में प्रमुखता से प्रदर्शषत की जाएगी।
(5) बैंक् समैन या आनसेटर के भसिाय, कोई व् यभक्त, जब तक िह खान का पदधारी न हों या प्रबंधक द्वारा
संकेत देन े के भलए भलभखत रूप से प्राभधकृत न ककया गया हो, कोई संकेत नहीं देगा।
(6) सकं ेतन प्रर्ाली में कोई िी त्रुरट तरु ंत ककसी पदधारी को ररपोटष की जाएगी, जो त्रुरटयों को दरू करने का
उपाय करेगा।
(7) इस भिभनयमन में कदए गए भसिडलंग भसस्टम के अभतररक्त, दो-तरफ़ा संचार या दरू संचार प्रर्ाली का एक
और प्रिािी साधन िी प्रदान ककया जाएगा ताकक िाइंडिंग इंजन ऑपरेटर, भपट टॉप अटेंिेंट, ऑनसेटर, डपंजरे
के अंदर यात्रा करने िाल े व्यभक्त या कोई अन्य व्यभक्त भबना ककसी करठनाई और बाधा के एक दसू रे से संपकष और
संिाद कर सकें।
(8) (क) जहाँ शाफ्ट या डिंज ऊध्िाषधर हो और उसकी गहराई 45 मीटर से अभधक हो, िहाँ केज या पररिहन
के अन्य साधनों की सुचारू और सुरभित आिाजाही सुभनभित करने के भलए पयाषप्त संख्या में गाइड्स प्रदान
ककए जाएंगे:
बशते कक: मैन-िाइंडिंग के मामले में, गहराई चाह े ककतनी िी हो, केज या पररिहन के अन्य साधनों की सुचारू
और सुरभित आिाजाही सुभनभित करन े के भलए पयाषप्त सख्ं या में गाइड्स प्रदान ककए जाएंगे।
(ख) जहा ँ रस्स ी के गाइि प्रयुक् त होत े ह ैं िहा ँ चीज-िेट या तल-कीलक ऐस े अनािृत रख े जाएँगे कक उनकी
परीिा भनयभमत रूप से की जा सके।
(9) सबसे ऊपरी लैंडिंग के ऊपर, डपंजरे को पकड़ने के भलए 'िॉग्स' या अन्य उपकरर् या तेज हिा की भस्िभत
में पररिहन के अन्य साधन उपलब्ध कराए जाएंगे, या गाइि, रनर या ररसीिर लगाए जाएंगे।
(10) (क) घर्षर् िाइंिर के भसिाय, प्रत् येक शाफ्ट के भशखर पर जहाँ डपंजरों का उपयोग ककया जाता ह,ै
उपयुक्त केप्स प्रदान ककए जाएंगे और इस तरह व्यिभस्ित ककए जाएंगे कक जब संचालन लीिर छोड़ा जाए तो ि े
'चालू' भस्िभत में आ जाएं ।
(ख) हर इनसेट पर जहा ं केप्स या फोडल्िंग प्लेटफॉमष कदए गए ह,ैं िहां केप्स या प्लेटफॉमष को 'ऑफ' पोजीशन
में सुरभित रूप से लॉक करने का इंतज़ाम ककया जाएगा; और जब ऐसे केप्स या प्लेटफॉमष 'ऑफ' पोजीशन में
हों, तो डपंजरे के भनकलने के भलए शाफ्ट को खाली छोड़ देंगे; और
(ग) ऐसे हर मामले में, केप्स या प्लेटफॉमष की जगह कदखाने के भलए एक सही ऑटोमैरटक इंभिकेटर, जैसा
िी मामला हो, ऐसी जगह पर लगाया जाएगा कक भपट टॉप अटेंिेंट उसे सुगमता से देख सके।
(11) (क) शाफ्ट के प्रत्येक इनसेट पर, अगर कोई हो, और शाफ्ट के नीचे, शाफ्ट में ककसी िी चीज़ के भगरने के
खतरे को रोकन े के भलए काफ़ी प्रोटेभक्टि छत की व् यिस्ि ा की जाएगी और उस े अनुरभित रखा जाएगा जो
शाफ्ट में ककसी िस्तु के भगरने से होने िाले खतरे को रोक सके।
(ख) प्रोटेभक्टि छत और केज के ऊपर के बीच, सीधा और आड़ा, दोनों तरफ का गैप, जब केज सिी इनसेट पर
और शाफ्ट के नीचे हो, 15 सेंटीमीटर से ज़्यादा नहीं होना चाभहए।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 73
78. मनै िाइंडिगं । - (1) ऐसे शाफ्ट के भसिाय जो खोदा जा रहा हो, प्रत् येक शाफ्ट के संबंध में जहाँ व् यभक्तयों
को उतारन े या चढाने के भलए िाइंडिंग इंजन का उपयोग ककया जाता ह,ै उप-भिभनयम (2) से उप-भिभनयम
(18) के उपबन् ध लागू होंगे।
(2) िाइंडिंग इंस्टालेशन के प्रत्येक भहस्स े के संबंध में, भजसमें पुली या शीव्स, केज, चने , भिस्ट्रीब्यूशन प्लेट और
भिटैडचंग हुक शाभमल ह,ैं भनम्नभलभखत भििरर् इस उद्देश्य के भलए रखी गई एक बाउंि पेज िाली पुस्तक में या
पुन: प्राप्त करन े योग्य और गरै -संपादन योग्य/ नॉन-एभिटेबल इलेक्ट्रॉभनक रूप में दजष ककए जाएंगे, यानी:–
(क) भिभनमाषता का नाम और भिभनमाषर् का िर्ष
(ख) भिभशष्टताएँ और आयाम
(ग) पुजे के साि अनुदत् त प्रत्य ेक प्रमार्-पत्र का भनदेश;
(घ) प्रत्येक पुजे के लगाये जाने की भतभि;और
(ि.) कोई अन् य भििरर् जो आिश् यक हो या िेत्रीय भनरीिक सह सुभिधाकताष द्वारा अपेभित हो।
(3) पुभस्तका की सब प्रभिभष्टयाँ इंजीभनयर या अन् य सिम व् यभक्त द्वारा पुनः प्राप्त करन े योग्य, गैर-संपादन योग्य
इलेक्ट्रॉभनक रूप मेंदज ष की जाएगी और िह उन पर हस्त ािर/ई-हसतािर करेगा और प्रबंधक उन पर प्रभत
हस्त ािर/ई-हस्तािर करके तारीख िालेगा।
(4) जब िी ककसी िाइंडिंग इंस्टालेशन में ककसी भहस्स े या िस्तु को बदला जाता ह,ै या ककसी मरम्मत ककए गए
भहस्से या िस्तु का उपयोग ककया जाता ह,ै तो ऐस े प्रभतस्िापन या मरम्मत के त्य को उप-भिभनयम (2) के
तहत रखी गई पुस्तक या इलक्े ट्रॉभनक रूप में दजष ककया जाएगा।
(5) (क) डसंगल डलंक्ि चेन का उपयोग नहीं ककया जाएगा, भसिाय केज या पररिहन के अन्य साधन से जुड़ी
छोटी कपडलंग चेन के, और ऐसी डसंगल डलंक्ि चेन को भिस्ट्रीब्यूशन प्लेट या अन्य अनुमोकदत उपकरर् के
माध्यम से सेफ्टी हुक से जोड़ा जाएगा; और
(ख) जहाँ सेफ्टी-चेन का उपयोग ककया जाता ह,ै उनकी लंबाई इतनी होगी कक यकद ककंग-बोल्ट टूट जाता ह,ै तो
केज या पररिहन के अन्य साधन पर झटका यिासंिि न्यूनतम हो।
(6) जहाँ िम-क् लचों की व् यिस् िा की गई हो, िहाँ भनम् नभलभखत उपबन् ध प्रिािी होंगे; अिाषत् :-
(क) िम-क् लच के प्रितषक भगयर के साि, अनिधानता से क् लच की िापसी को रोकने के भलए, लॉककंग-भगयर
की व् यिस् िा की जाएँगी;
(ख) व् यभक्तयों को उतारने या चढाने के भलए प्रयोग में लाए जाने िाले इंजन में एक उपयुक् त इंटरलॉककंग युभक्त
होगी जो इस प्रकार लगाई जाएगी भजससे संिि न हो :-
(i) ककसी िी िम को तब तक अनक्लच नहीं ककया जाएगा, जब तक कक उस िम के ब्रेक न लगा कदए गए हों;
(ii) ब्रेक को तब तक नहीं छोड़ा जाएगा जब तक कक िम क्लच पूरी तरह से लगा न हो और सुरभित रूप स े
लॉक न हो गया हो;
(ग) जब तक कक िम से जड़ु ा केज या पररिहन का अन्य साधन शाफ्ट या डिंज के भनचले भहस्से पर रटका न
हो, तब तक िम को अनक्लच नहीं ककया जाएगा, भसिाय इसके कक िाइंडिंग इंजन ऑपरेटर ने तुरंत पहले यह
सुभनभित न कर भलया हो कक ब्रेक पूरी तरह से लगा हुआ ह।ै
(7) घर्षर् िाइंिर के भसिाय, रस्स ी और डपंजर या अन् य प्रिहर्-साधन के बीच एक भिलग् न करने िाली हुक
की व् यिस् िा की जाएगी।74 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(8) जब केज या पररिहन का अन्य साधन शाफ्ट के शीर्ष पर अपनी सामान्य भस्िभत में हो, तब ऐसे भिटैडचंग
हुक भजसे रस्सी के शकल से जोड़ने िाले छेद के केंद्र से मापा गया हो—और भिटैडचंग-बेल प्लेट के बीच की दरू ी:
जहाँ भगयिष इंजन का उपयोग ककया जाता ह,ै िहाँ 3.6 मीटर स े कम नहीं होगी, और जहाँ िायरेक्ट एडक्टंग
इंजन का उपयोग ककया जाता ह,ै िहाँ 7.5 मीटर स े कम नहीं होगी।
(9) यकद शाफ्ट या डिंज की गहराई 300 मीटर से अभधक ह,ै तो सबसे भनचल े लैंडिंग स्िान के नीच े कम स े
कम 7.5 मीटर का स्पष्ट ओिर-रन स्पेस होना चाभहए। सबसे भनचले लैंडिंग स्िान के नीचे के संप को पानी या
अन्य तरल पदािों से इस सीमा तक मुक्त रखा जाएगा कक ओिरिाइंि की भस्िभत में, केज या पररिहन के अन्य
साधनों में सिार व्यभक्त पानी में न िूबें।
(10) हर शाफ्ट में, इंजन में ऑटोमैरटक रूप से स्पीि ररकॉिष करन े िाला इंभिकेटर लगा होगा।
(11) (क) प्रत् येक शाफ्ट में अत् यभधक गभत और अत् यभधक लपेट को रोकने के भलए एक प्रिािी स्ि चल प्रयुभक्त
की व् यिस् िा की जाएगी भजसको इसमें इसके पश् चात ् ‘’स्ि चल प्रयुभक्त’’ कहा जाएगा, जो स्ि चल प्रयुभक्त उतरत े
हुए डपंजर को गत ष के अधर-तल पर या अन् य स्ि ायी अितरर् पर, 1.5 मीटर प्रभत सेकण् ि स े अभधक गभत से,
उतरने से रोकेगी और चढत े हुए डपंजर के चलने का इस प्रकार भनयंत्रर् िी करेगी कक उसमें चढे व् यभक्तयों के
भलए खतरा न हो सके।
(ख) मुख्य भनरीिक-सह-सुभिधाकताष भलभखत आदेश द्वारा ककसी िी शाफ्ट में लपेट की अभधकतम गभत भनर्दषष्ट
कर सकता ह।ै
(ग) प्रत्येक स्ि चल प्रयुभक्त और प्रत्येक ब्रेक का परीिर् इस उद्देश्य के भलए भनयुक्त अभियंता या अन्य सिम
व्यभक्तयों द्वारा भनम्नभलभखत तरीके से ककया जाएगा, अिातष ्: -
(i) प्रभत सात कदन में कम से कम एक बार प्रत् येक डपंजर या अन् य प्रिहर्-साधन को क्रमश: उच् च्त म
अितरर् के ऊपर अंभतम भनयंत्रर् भबन् द ु को पार करने के भलए, उठाकर;
(ii) प्रभत तीन मास में कम से कम एक बार उतरत े हुए डपंजर को अत् यभधक गभत स े उतारन े का प्रयत् न
करके और इस जाँच के प्रयोजन के भलए स्ि चल प्रयुभक्त की भस्िभत इस प्रकार पररिर्तषत की जा सकेगी कक शाफ्ट
में कोई पूिष - भनधाषररत भबन् द ु अितरर् माना जा सके;
(iii) ऐसी प्रत् येक जाँच का फल इस प्रयोजन के भलए रखी गई भजल् दबि पृष्ठ संख् यांककत पुभस्तका में या
पुनः प्राप्त करने योग्य या गैर-संपादन योग्य इलेक्ट्रॉभनक रूप में भलखा जाएगा और जाँच करने िाला व् यभक्त
उसपर हस्त ािर/ई-हस्तािर करके तारीख िालेगा।
(घ) जब तक स्िचाभलत उपकरर् िाइंडिंग इंजन के साि पूर्ष और भनभित रूप से जड़ु ा नहीं होता ह,ै तब तक
व्यभक्तयों को नीचे उतारने या ऊपर ले जाने के समय, इसे स्िचाभलत रूप स े या िाइंडिंग इंजन ऑपरेटर द्वारा
पूरी तरह से जोड़ा जाना चाभहए; और यह कदखाने के भलए एक स्िचाभलत संकेतक प्रदान ककया जाएगा भजस े
भपट टॉप अटेंिेंट आसानी से देख सके;
(ि.) भपट टॉप सहायक ककसी व् यभक्त को डपंजर या अन् य प्रिहर्-साधन में तब तक प्रिेश नहीं करने देगा जब
तक कक सूचक यह दर्शषत नहीं करता कक स् िचल प्रयुभक्त पूर्षतया लग गई ह।ै
(12) ओिरिाइंडिंग को रोकने के भलए कदए गए स्िचाभलत उपकरर् के अभतररक्त, इंजन के इंभिकेटर पर एक
डबंद ु इस तरह से भनधाषररत और भचभह्नत ककया जाएगा जो यह दशाषए कक केज या पररिहन का अन्य साधन
िाइंडिंग पूरी होने से कम स े कम िम की पररभध के दोगुने की दरू ी पर ह;ै और यकद उस केज या पररिहन के
अन्य साधन में व्यभक्त सिार ह,ैं तो जैसे ही िह उपयुषक्त डबंद ु पर पहुचँ ेगा, िाइंडिंग इंजन ऑपरेटर शेर् दरू ी के
भलए उसे 1.2 मीटर प्रभत सके ंि से अभधक की गभत स े ऊपर नहीं उठाएगा।
(13) जहाँ ककसी खान से भनकलने का एकमात्र साधन ऐसा उपकरर् ह ै जो िाप या भिद्युतस े चलता ह,ै िहा ँ
यह सुभनभित करने के भलए पूिाषिधानी बरती जाएगी कक दोनों िाइंडिंग इंजन एक साि भनष्फ ल नहीं हो जाते,
और भिभशष्ट रूप से भिद्युतिाइंडिंग इंजनों की दशा में, इंजन दो पृिक शभक्त प्रदायों से जोड़े जाने योग् य होंगे।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 75
(14) जब तक मुख्य भनरीिक-सह-सुभिधाकताष द्वारा ककसी आदेश के माध्यम से अन्यिा भनदेभशत न ककया गया
हो, तब तक उप-भिभनयम (13) के प्रािधानों का अनपु ालन हुआ माना जाएगा, यकद एक आपातकालीन
िाइंडिंग भगयर का रखरखाि ककया जाता ह।ै
(15) (क) भजस डपंजर या अन् य प्रिहर्-साधन में व् यभक्त चढते ह ैं :-
(i) िह ऊपर से पूर्षतया ढका होगा;
(ii) िह दो ओर से इस प्रकार से बन् द होगा कक व् यभक्तयों या िस् तुओं को पाश्ि ों के बाहर भनकलने स े
पयाषप्त रूप से रोक सके;
(iii) उसमें एक दढृ हस्त श् ला का की व् यिस् िा की जाएगी जो ऐसी भस्िभत में भस्िर होगी कक डपंजर या
अन् य प्रिहर्-साधन में के सब व् यभक्त उस तक सुगमता स े पहुचँ सके;
(iv) उसमें इस िांभत यिोभचत फाटकों या अन् य दढृ बाड़ों की व् यिस् िा की जाएगी कक डपंजर या अन् य
प्रिहर् साधन के फशष और फाटक या बाड़ के भनम् नतम िाग के बीच का फासला 15 सन्े टीमीटर से अभधक न हो
जाए और फाटक या बाड़ के ककन् हीं दो िागों का फासला 25 सेन् टीमीटर से अभधक न हो जाए। फाटक या बाड़ े
बाहर की ओर नहीं खुलेंगी और िे इस प्रकार लगाई और अनुरभित की जाएँगी कक िे अकस्म ात न खुल सके;
और
(v) कम्युभनकेशन का एक असरदार तरीका या टेलीकम्युभनकेशन भसस्टम होना चाभहए भजसमें ऑभियो और
भिज़़ुअल की सुभिधा हो, भजसमें भपट टॉप अटेंिेंट या इंजनमैन और बेलमैन से कम्युभनकेशन के भलए ब्रॉिकाडस्टंग
भसस्टम िी शाभमल हो।
(ख) हर केज या आने-जाने के दसू रे साधन का फश ष मज़बूती स े बनाया जाएगा और इस तरह स े मेंटेन ककया
जाएगा कक केज या आने-जाने के दसू रे साधन में सिार व्यभक्त के शरीर का कोई िी भहस्सा फशष से बाहर न
भनकले;
(16) एक समय में, डपंजर या डपंजर के एक ही िेक में या अन् य प्रिहर्-साधन में प्रभत व् यभक्त को फशष के िेत्र
का लगिग 0.20 िगषमीटर अनुदत् त करते हुए, उतन े स े अभधक व् यभक्तयों को नहीं चढने कदया जाएगा भजतने
प्रबंधक द्वारा प्राभधकृत ककए जाएँ, और उस संख् या को भिभनर्दषष् ट करते हुए एक सूचना प्रत् येक शाफ्ट के भशखर
और अधस्त ल पर और प्रत्य ेक इनसेट पर लगाई जाएगी।
(17) जब तक मुख्य भनरीिक-सह-सुभिधाकताष द्वारा भलभखत आदेश के माध्यम से अनुमभत न दी गई हो और
उसमें भनर्दषष्ट शतों के अधीन, ककसी िी केज या पररिहन के अन्य साधनों में एक समय में सिार होने िाल े
व्यभक्तयों की अभधकृत संख्या का कुल िार, सामिी लाने-ले जाने के भलए भनधाषररत अभधकतम िार के 60
प्रभतशत से अभधक नहीं होगा।
(18) (क) कोई िी व्यभक्त, शाफ्ट में ऊपर चढते या नीचे उतरते समय, अपने साि औजारों और उपकरर्ों के
अलािा कोई िी िारी या बड़ा सामान नहीं ले जाएगा; भसिाय तब, जब िह शाफ्ट की मरम्मत के काम में लगा
हो या उसके पास प्रबंधक का भलभखत अभधकार-पत्र हो।
(ख) खंि (क) में कदए गए प्रािधान को छोड़कर, कोई िी व्यभक्त उस समय केज में सिारी नहीं करेगा, जब
ककसी िी केज या पररिहन के अन्य साधन में सामिी या टब ऊपर लाए या नीचे उतारे जा रह े हों।
(19) कफ्रक्शन िाइंिसष को छोड़कर, शाफ्ट के भपट बॉटम पर एक उपयुक्त उपकरर् स्िाभपत ककया जाएगा
ताकक हािष लैंडिंग के समय नीचे उतरते केज के प्रिाि को कम ककया जा सके और केज स े यात्रा करन े िाल े
व्यभक्तयों की सरु िा सभु नभित की जा सके।
बशत े कक मुख्य भनरीिक-सह-सुभिधाकताष, ऐसी शतों के अधीन भजन्ह ें ि े भनर्दषष्ट करें, इनम ें स े ककसी िी उप-
भिभनयम की आिश्यकताओं में छूट दे सकत े ह,ैं यकद ककसी खदान या उसके भहस्से में पररभस्िभतयाँ ऐसी हों कक
उन आिश्यकताओं का अनुपालन करना उभचत रूप से व्यािहाररक न हो।76 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
79. मल्टी-िके . - जहाँ ककसी डपंजर में दो या अभधक िेक हों जो साि-साि प्रयोग में लाए जात े हों, िहा ँ
अितरर् का प्रत् येक फशष, ककसी प्रिािी संकेत-युभक्त के द्वारा अितरर् के मुख् य फशष से जोड़ा जाएगा और ऐस े
मुख् य फशष पर, यिाभस्िभत, केिल भपट टॉप अटेंिेंट या बेलमैन या कोई ऑकफ़भशयल, जैसा िी हो, ऐस े मेन
फ़्लोर पर एक्शन भसिल तिी देगा जब िह खुद यह पक्का कर ले कक केज के सिी गेट बंद ह।ैं
80. सामिी की िाइंडिगं .– (1) टबों को उठाने या उतारने के भलए प्रयुक् त होन े िाले प्रत् येक डपंजर में कैच या
दसू रे असरदार तरीके कदए जाएंगे ताकक टब बाहर न भगरें और केज को तब तक नहीं चलाया जाएगा जब तक
कैच या दसू रे असरदार तरीके ठीक भस्िभत में न हो।
(2) प्रत् यके डपंजर का फशष साफ रखा जाएगा और कोई भस्कप, बाल्ट ी, या टब इतनी ऊँचाई तक नहीं िरा
जाएगा कक उसका कोई िी सामान बाहर भगर सके।
(3) इसके पूिष कक लंबा काष्ठ , पाइप, पटरी या अन् य सामिी, जो डपंजर या अन् य प्रिहर्-साधन के भशखर पर
से बाहर को भनकली हुई हों, उतारी या उठाई जाए, बाहर भनकले हुए छोर रस्स ी, जंजीरों या िो से सरु भित
रूप से बांध कदए जाएँगे।
81. डसकं कंग शाफ्ट म ें िाइंडिंग।- (1) प्रत्येक शाफ्ट या भिनज़ पर, जो िूब रहा ह,ै जहा ं िाइंडिंग इंजन का
उपयोग ककया जाता ह,ै उप-भिभनयम (2) से उप-भिभनयम (11) के प्रािधान लागू होंगे।
(2) यकद शाफ्ट गहराई में 45 मीटर से अभधक ह ै तो प्रत् येक बाल्ट ी या अन् य प्रिहर्-साधन में एक भियोजक हुक
की व् यिस् िा की जाएगी:
बशते कक जहां भिशेर् पररभस्िभतयां मौजूद हों, मुख्य भनरीिक भलभखत रूप में एक आदेश द्वारा और
ऐसी शतों के अधीन रहते हुए, जो िह उसमें भनर्दषष्ट कर, इस खंि के प्रािधान से छूट प्रदान कर सकता ह।ै
(3) रस्स ी पाश से भियोजन करने िाली हुक को संलग्न करने के भलए धारक के केन् द्र और भियोजन करन े
िाली बेल प्ल ेट के बीच का साफ ओिर-रन-अन् तर (ओिर रन स्प ेस), जब बाल्ट ी या अन् य प्रिहर्-साधन भशखर
के अितरर् पर हो, 3.6 मीटर से कम नहीं होगा।
(4) जहाँ शाफ्ट गहराई में 150 मीटर से अभधक ह ै िहा,ँ -
(क) बाल्ट ी या अन् य प्रिहर्-साधन के ऊपर, जब िह व् यभक्तयों को उतारने या चढाने के भलए प्रयुक् त हो,
शाफ्ट से भगरती हुई िस्त ुओं से संरिर् के भलए पयाषप्त आच् छादन की व् यिस् िा की जाएगी; और
(ख) प्रत् यके बाल्ट ी या अन् य प्रिहर्-साधन के भलए पयाषप्त संख् या में गाइिों की व् यिस्ि ा की जाएगी, जो उस
समय जब खुदाई चल रही हो, शाफ्ट के तल से 22.5 मीटर के िीतर तक जाएँगे:
बशते कक िेत्रीय भनरीिक-सह-सुभिधाकताष, एक आदेश द्वारा, ऐसे शाफ्ट में िी गाइि लगाए जाने की
आिश्यकता का भनदेश दे सकता ह ै भजसकी गहराई 150 मीटर से कम ह ै या जो लंबित नहीं ह।ै
(5) (क) भनम् नभलभखत की व् यिस् िा की जाएगी एिं उन्ह ें बनाए रखा जाएगा :-
(i) शाफ्ट के अधस्त ल और भशखर के बीच सुभिन् न और स्प ष्ट संकेतों के आदान-अनुदत् त के भलए दो पृिक
साधन; और
(ii) शाफ्ट के भशखर से िाइंडिंग इंजनमैन को ऐसे संकेतों के पारेर्र् हते ु दि साधन।
(ख) संकेत देने िाले साभधत्रों की परीिा चौबीस घंटे म ें कम से कम एक बार ककसी सिम व् यभक्त द्वारा की
जाएगी और ऐसी प्रत् येक पर ीिा का पररर्ाम, इस प्रयोजन के भलए रखी गई भजल् दबि पृष्ठ संख् यांककत पुभस्तका
में पुनः प्राप्त करन े योग्य या गैर-संपादन योग्य इलेक्ट्रॉभनक रूप में भलखा जाएगा और परीिा करनेिाले व् यभक्त
द्वारा उस पर हस्त ािर या ई-हस्त ािर करके तारीख िाली जाएगी।
(ग) मुख् य भनरीिक सह सुभिधाकताष द्वारा भलभखत अनज्ञु ा के भसिाय और उन शतों के अधीन रहते हुए जो
उसमें भिभनर्दषष् ट ककया जा सकता ह ै , सकं ेत देने में सकं ेतों की भनम् नभलभखत संभहता का प्रयोग और अनुपालन
ककया जाएगा :-[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 77
एक रैप : रोको
दो रैप : नीचे करो
तीन रैप : ढील कम करो या ऊपर उठाओ
चार रैप : ढील कम करो या ऊपर उठाओ जब व् यभक्त चढे हों :
बशते कक, कोई िी अन्य संकेत उपरोक्त सकं ेतों के अभतररक्त होंगे और ि े उनमें ककसी िी प्रकार का हस्तिेप नहीं
करेंगे:
बशते यह िी कक, मुख्य भनरीिक-सह-सुभिधाकता,ष भलभखत आदेश द्वारा और उसमें भनर्दषष्ट शतों के अधीन,
ऊपर बताए गए कोि के अलािा ककसी िी अन्य संकेत कोि के उपयोग की अनुमभत दे सकते ह।ैं
(घ) संकेतों के कोि की एक छपी हुई प्रभत, भजसमें यकद कोई अभतररक्त संकेत हों तो उन्ह ें शाभमल करते हुए,
शाफ्ट के शीर्ष पर और िाइंडिंग इंजन रूम में प्रमुखता स े लगाई जाएगी।
(ि.) बकेट या अन् य प्रिहर्-साधन में यात्रा करते समय के भसिाय प्रबंधक द्वारा भलभखत रूप में प्राभधकृत व् यभक्त
से भिन् न कोई व् यभक्त कोई सकं ेत नहीं देगा।
(6) प्रत् यके बकेट या अन् य प्रिहर्-साधन, भजसमें व् यभक्त या सामिी लाई ले जाई जाती ह,ै सुदढृ बना होगा
और इस प्रकार बनाए रखा जाएगा कक व् यभक्तयों या सामिी को भगरने से रोक सके।
(7) (क) शाफ्ट के भशखर पर या अितरर् पर जहा ँ बकेट या अन् य प्रिहर्-साधन सामान् यत: उतारा जाता ह,ै
यिोभचत दरिाजों सभहत आच् छादन की व् यिस् िा की जाएगी:
बशते कक, दरिाजे और आच्छ ादन, बकेट या अन् य प्रिहर्-साधन के गुजरने के भलए यिापेभित के भसिाय, सदैि
बन् द रखे जाएँगे।
(ख) जहाँ शाफ्ट या भिन्ज़ का झुकाि िैभतज से 35 भििी या उससे अभधक ह ै और उसकी गहराई 45 मीटर स े
अभधक ह,ै िहाँ शाफ्ट या भिन्ज़ के तल पर काम करने िाले व्यभक्तयों को एक पयाषप्त सुरिा किच द्वारा सुरभित
ककया जाएगा। यह किच शाफ्ट या भिन्ज़ के पूरे िेत्र में फैला होगा और इसमें बाल्टी या पररिहन के अन्य
साधनों के आने-जाने के भलए एक दरिाजा होगा। साि ही, जब िी डसंककंग का काम चल रहा हो, उस किर या
स्कैफोल्ि को हर समय नीचे रखा जाएगा –
(i) यकद शाफ्ट या भिन्ज़ लंबित ह,ै तो तल से 22.5 मीटर से अभधक की दरू ी पर नहीं; और
(ii) ककसी िी अन्य मामले में, तल से 30 मीटर से अभधक की दरू ी पर नहीं:
बशते कक, जहाँ भिशेर् पररभस्िभतयाँ मौजूद हों, िहा ँ मुख्य भनरीिक-सह-सुभिधाकताष, भलभखत आदेश द्वारा और
उसमें भनर्दषष्ट शतों के अधीन, इस खंि के प्रािधानों से छूट दे सकते ह।ैं
(8) प्रबंधक द्वारा प्राभधकृत संख् या से अभधक व् यभक्तयों को, एक ही समय में, बकेट या अन् य प्रिहर्-साधन में
चढने नहीं कदया जाएगा और ऐसी संख् या को भिभनर्दषष् ट करते हुए एक सूचना शाफ्ट के भशखर पर सदश्ृ य रूप में
लगाई जाएगी।
(9) जब औजार, उपस्क र या अन् य सामिी उतारी या चढाई जाए रही हो तो, यिाभस्िभत, भपट टॉप सहायक
या अन् य प्राभधकृत व् यभक्त यह देखेगा कक :-
(i) बकेट यिोभचत रूप से िरी गई ह;ैं
(ii) सामिी ककनारों से ऊपर तक नहीं िरी गई ह;ैं78 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iii) लम् ब े काष्ठ , पाइप, पटरीयाँ, औजार, या अन् य सामिी, भजनकें छोर ककनारों के बाहर भनकल रह े हों,
रस्स ी, जजं ीर या बो से सुरभित रूप से बांधे हुए ह;ैं और
(iv) चलाई जाने के पूिष बकेट भस्िर कर दी गई ह,ैं और उसका अधस्त ल तिा पाश्ि ष भचपकने िाली
सामिी से मुक् त ह।ै
(10) जहाँ गाइिों की व् यिस् िा की गई ह,ैं िहाँ बकेट या अन् य प्रिहर्-साधन शाफ्ट के अधस्त ल से मंदगभत
से उठाया जाएगा, जब तक कक यह गाइिों के सम् पकष में ना आ जाए।
(11) जब शाफ्ट में व् यभक्त ककसी मचान या प्लेटफॉमष पर काम में लगे हों, तब भनम्न भलभखत पूिाषिधाभनयों
का कड़ाई के साि अनुपालन होगा, अिाषत् -
i.मचान या प्लेटफॉमष को शाफ्ट के पश् िो के साि कस कदया जाएगा भजसस े उसको झूलन े से रोका जा सके;
ii. बाल्ट ी या अन् य प्रिहर् साधन का द्वारा इस प्रकार अनरु भित होगा कक उसमें से ककसी िस् तु का भगरना प्रिािी
रूप से रोका जा सके;
82. िाइंडिगं की रभस्सया ँ आकद.– (1) हर शाफ्ट या डिंज़ पर, जहा ं रस्सी का इस्तमे ाल लपेटने के भलए ककया
जाता ह,ै सब-रेगुलेशन (2) से सब-रेगुलेशन (8) के भनयम लागू होंगे।
(2)(क) कोई रस्स ी, श्लाका, कड़ी, जंजीर या डपंजर या अन् य प्रिहर्-साधन से लगी कोई दसू री िस् तु उपयोग में
तब तक नहीं लाई जाएगी जब तक िह अच् छी क् िाभलटी और भिभनमाषर् की, दश्ृ य दोर् स े मुक् त और पयाषप्त
मानी जाने िाली शभक्त की न हो:
बशते कक मुख् य भनरीिक सह सुभिधाकताष भलभखत आदेश द्वारा ककसी रस्स ी या ककसी प्रकार की
रभस्सयों का उपयोग िहाँ प्रभतभर्ि कर सकेगा, जहाँ, उसकी राय में, ऐसा उपयोग खतरनाक हो।
(ख) रस्स ी और डपंजर या अन् य प्रिहर्-साधन के बीच का बन् धन इस प्रकार का होगा और इस तरह स े
अनुरभित होगा कक अकस् मात् न खुले।
(ग) प्रयुक् त की हुई या प्रयोग के भलए आशभयत ककसी रस्स ी, शलाका, कड़ी, जंजीर, या ककसी दसू री संयोजन
की िस् त ु के ठीक होन े के भिर्य में शंका की दशा म ें िह प्रश् न मुख् य भनरीिक सह सुभिधाकताष को भिभनश् चय के
भलए भनदेभशत ककया जाएगा।
(3) (क) 30 मीटर से कम गहराई िाले डसंककंग शाफ्ट या भिनज़ को छोड़कर, हर िाइंडिंग रस्सी कोल्ि िॉन
स्टील िायर से बनी होगी, और ऐसी रस्सी बनाने में इस्तेमाल होने िाले तारों का गेज िाइंडिंग इंस्टॉलेशन के
िमों, पुभलयों और शीिों के व्य ास के अनरूु प होगा।
(ख) खोदे जा रह े शाफ्ट को सभम्मभलत करते हुए, प्रत् येक शाफ्ट में, जहाँ व् यभक्त उतारे चढाए जाते ह ै और
गाइिों की व् यिस् िा नहीं ह,ै न घूमने िाली रस्स ी से भिन् न ककसी रस्स ी का प्रयोग नहीं ककया जाएगा।
(ग) गांठ से जुड़ी हुई कोई रस्स ी िाइंडिंग के प्रयोजन के भलए उपयोग में नहीं लाई जाएगी।
(घ) ककसी िी िाइंडिंग रोप का उपयोग तब तक नहीं ककया जाएगा, और न ही उसे उपयोग में जारी रखा
जाएगा, यकद उसका सरु िा कारक 10 से कम हो जाए (यानी ककसी िी डबंद ु पर रस्सी की ब्रेककंग लोि और
डपंजरे या पररिहन के अन्य साधनों के सबसे भनचले काय ष डबंद ु पर होने पर उस पर अभधकतम स्टेरटक लोि का
अनुपात)। इसके अलािा, मुख्य भनरीिक-सह-सुभिधाकताष भलभखत आदेश द्वारा और उसमें भनर्दषष्ट शतों के
अधीन, सुरिा कारक का कोई अन्य मान िी भनधाषररत कर सकते ह।ैं
(ि.) प्रत् यके खान पर, जहाँ व् यभक्तयों को उतारने-चढाने के भलए शाफ्ट का प्रयोग ककया जाता ह,ै कम से कम
एक अभतररक् त िाइंडिंग रस्स ी, जो उस शाफ्ट में उपयोग ककए जाने योग् य हो, िंिार म ें रखी जाएगी।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 79
(4) (क) प्रयोग में आने िाली या प्रयोग के भलए आशभयत प्रत् येक रस्स ी के संबंध में भिभनमाषता या आपूर्तषकताष से
प्राप्त प्रमार्-पत्र, भजसमें उसे तोड़ने योग् य िार, उसकी क् िाभलटी, भनमाषर् और व् यास भलखे होंगे और उसके
उपयोग का िृतांत, रस्स ी के संबंध में प्रयोग ककए गए िमों, शीिों और पुभलयों के व् यासों के अभिलेख को
सभम्मभलत करते हुए, इस प्रयोजन के भलए रखी गई भजल्द बि पृष्ठ संख् यांककत पुभस्तका में पुनः प्राप्त करने योग्य
या गैर-संपादन योग्य इलेक्ट्रॉभनक रूप में रखे जाएँगे।
(ख) खण्ि (क) में भनर्दषष् ट पुभस्तका में पुनः प्राप्त करने योग्य या गैर-संपादन योग्य इलेक्ट्रॉभनक रूप में की गई
सिी प्रभिभष्टयाँ इंजीभनयर द्वारा या अन् य सिम व् यभक्त द्वारा हस्त ािररत/ई-हस्तािररत की जाएगी और प्रबंधक
द्वारा तारीख के साि प्रभतहस्त ािररत/ ई-हस्तािररत की जाएगी।
(ग) यकद ककसी रस्स ी के भिर्य में उसके तोड़ने योग् य िार के बारे में जाँच का प्रमार्-पत्र उपलब् ध न हो तो
उसका प्रयोग तब तक नहीं ककया जाएगा जब तक, उसका एक िाग,जो लंबाई म ें तीन मीटर स े कम न हो,
रस्स ी के उस छोर की तरफ से जो कैपल से संलग्न ह,ै काट नहीं भलया जाता और ककसी प्रयोगशाला, संस्ि ान या
जाँच घर में जो इस प्रयोजन के भलए केन् द्रीय सरकार द्वारा अनुमोकदत हो, उसकी जाँच नहीं कर ली जाती।
(5) (क) ककसी िी ऐसी िाइंडिंग रोप का उपयोग िाइंडिंग उद्देश्यों के भलए नहीं ककया जाएगा, जो कफ्रक्शन या
कोपे िाइंिसष के मामले में दो िर्ष स े अभधक, और अन्य िाइंिसष के मामले में साढ े तीन िर्ष से अभधक समय तक
उपयोग में रही हो:
बशते कक, जहाँ िेत्रीय भनरीिक-सह-सुभिधाकताष इस बात स े संतुष्ट हों कक कम उपयोग के कारर् ऐसी कोई
रस्सी उक्त अिभध की समाभप्त के बाद िी अच्छी भस्िभत में ह,ै तो िह भलभखत आदशे द्वारा और उसमें भनर्दषष्ट
शतों के अधीन, ऐसी रस्सी को और अभधक समय तक उपयोग करने की अनुमभत दे सकते ह।ैं
(ख) पूिोक्त दो िर्ष या साढ े तीन िर्ष की अिभध के बाद ककसी रस्सी का उपयोग करन े की अनुमभत के भलए
प्रत्येक आिेदन के साि, उप-भिभनयम (4) के तहत उस उद्देश्य के भलए रखी गई पुस्तक में या पुनप्राषभप्त योग्य
और संपादन-अयोग्य इलेक्ट्रॉभनक रूप में रस्सी के संबंध में की गई प्रभिभष्टयों की एक प्रभत, और साि ही रस्सी
की मजबूती के संबंध में एक प्रमार्पत्र संलि ककया जाएगा।
(ग) खंि (ख) में संदर्िषत प्रमार्पत्र, रस्सी के उस टुकड़े से संबंभधत होना चाभहए भजस े आिेदन की तारीख
से तीन महीन े से अभधक समय पहले न काटा गया हो।
(घ) यकद िेत्रीय भनरीिक-सह-सुभिधाकता ष की यह राय ह ै कक कोई रस्सी पूिोक्त दो िर्ष या साढे तीन िर्ष की
अिभध समाप्त होने से पहल े ही शाफ्ट म ें उपयोग के भलए असुरभित हो गई ह,ै तो िह एक भलभखत आदेश द्वारा,
िाइंडिंग उद्देश्यों के भलए ऐसी रस्सी के उपयोग को प्रभतबंभधत कर सकता ह।ै ऐसे ककसी िी आदेश के
भिरुि मुख्य भनरीिक-सह-सभु िधाकताष के पास अपील की जा सकती ह।ै
(6) (क) ऐसे ढंग या प्रकार की कैडपंग का प्रयोग नहीं ककया जाएगा जो उसके ऊपर के अभधकतम भस्िर िार स े
दस गुर्ा िार को सहन करन े में असफल रह।े
(ख) ककसी गोल रस्स ी की कैपल रस्स ी के िीतर स े भनकलन े िाले ररिटों के द्वारा, रस्स ी से संलग् न नहीं की
जाएगी।
(ग) कोई िी पीछे मोड़े जाने िाले तार के प्रकार की कैपेल िाइंडिंग रस्स ी के साि प्रयुक् त नहीं की जाएगी।
(घ) जहाँ रभस्सयों की कैडपंग में व्हाइट मेटल का उपयोग ककया जाता ह,ै िहाँ व्हाइट मेटल सॉकेट को रस्सी
की ब्रेककंग स्ट्रेंि को सहन करने में सिम होना चाभहए। सॉकेट का शंक्वाकार भहस्सा रस्सी के व्यास के छह गुना
से कम और आठ गुना से अभधक नहीं होना चाभहए, और टेपर का कोर् 3 भििी और 6 भििी के बीच होना
चाभहए।
(ि.) यकद रभस्सयों की कैडपंग के भलए श्ि ेत धात ु का प्रयोग ककया जाता ह ै तो,
(i) उसका गलनांक 300 भििी सेण् टीिेि अभधक नहीं होगा और शॉकेट में उड़ेलते समय उसकी
तापमान 363 भििी सेण् टीिेि से अभधक नहीं होगा;80 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ii) रस्सी की िह लंबाई जो सॉकेट के शंक्वाकार भहस्स े के िीतर रहनी ह,ै उसमें यकद कोई फाइबर कोर हो,
तो उसे काट कदया जाएगा और रस्सी के तारों को खोल कदया जाएगा और उन्ह ें पूरी तरह से साफ ककया
जाएगा;"
(iii) सफेद मेटल िालने से पहले सॉकेट को लगिग 100 भििी सेंटीिेि के तापमान पर गमष ककया जाएगा।
(7) घर्षर् िाइंिर के भसिाय,
(क) हर रस्सी को हर छह महीन े में कम स े कम एक बार, या अगर ज़रूरी हो, तो कम समय के बाद और हर
ओिरिाइंि के बाद िी कफर से कैप ककया जाएगा; और
(ख) हर बार कफर से कैप करने स े पहले, कैडपंग सभहत रस्सी से कम से कम दो मीटर की लंबाई काटी जाएगी
और इस तरह काटे गए रस्सी के हर टुकड़े को खोला जाएगा और उसकी अंदर की हालत की जांच की जाएगी।
(8) रस्सी पर रीकैडपंग का काम इंजीभनयर या ककसी दसू रे सक्छम व्यभक्त की देखरेख में ककया जाएगा, जो
तारीख और दसू री जानकारी (रीकैडपंग के बाद बची रस्सी की लंबाई सभहत) इस काम के भलए रखी गई बाउंि
पेज िाली बुक में या ररट्रीिेबल और नॉन-एभिटेबल इलेक्ट्रॉभनक फॉमष में ररकॉिष करेगा और उस पर हस्तािर
या ई-हस्तािर करेगा तिा कदनांक िालेगा।
83. सस्पशें न भगयर.- (1) सस्पेंशन भगयर के सिी भहस्से मुख्य भनरीिक-सह-सुभिधाकताष द्वारा अनुमोकदत
प्रकार के होंगे।
(2) भनयभमत उपयोग में आने िाले सस्पेंशन भगयर के सिी भहस्सों को, जब तक कक मुख्य भनरीिक-सह-
सुभिधाकता ष द्वारा अन्यिा अनुमभत न दी जाए, छह िर्ष से अभधक की सेिा अिभध के बाद, और यकद आिश्यक
हो तो बताए गए कारर्ों से कम अंतराल पर निीकृत ककया जाएगा।
(3) भनलम्बन भगयर के घटकों के भलए सुरिा कारक 10 से कम नहीं होगा तिा थ्रेिेि जोड़ों से परहजे ककया
जाएगा:
बशते कक जहां िी थ्रेिेि जॉइंट से बचना प्रैभक्टकल न हो, िहां कम से कम 15 का सेफ्टी फैक्टर पक्का
ककया जाएगा।
आगे यह िी प्रािधान ह ै कक डसंगल पॉइंट सस्पेंशन भगयर के मामले में, िॉ बार में कम से कम दो
अभतररक्त सेफ्टी चने होंगी और हर कंपोनेंट के भलए सेफ्टी फैक्टर 10 से कम नहीं होगा।
4 (क) आम तौर पर इस्तेमाल होन े िाली सिी केज चेन और रस्सी और केज या आने-जाने के दसू रे तरीकों के
बीच सस्पेंशन भगयर के सिी दसू रे भहस्सों, भजसमें भिटैडचगं -हुक िी शाभमल ह,ै को अलग ककया जाएगा, साफ़
ककया जाएगा और टूट-फूट (जहां ज़रूरी हो, गेज करके) और जंग और दरारों की ध्यान से जाचं की जाएगी, हर
छह महीन े में कम से कम एक बार, या अगर ज़रूरी हो, तो कम समय में; और अलग-अलग भहस्सों को दोबारा
लगाने से पहले, एक सही िट्टी में एनील ककया जाएगा या दसू रा सही हीट ट्रीटमेंट कदया जाएगा, जहां तापमान
को कंट्रोल ककया जा सके:
बशते कक ऐसी चेन या भगयर के मामले में जो ऐसे स्टील से बनी हो भजसके खराब होने की संिािना न
हो और भजसके भलए एनीडलंग या हीट ट्रीटमेंट की ज़रूरत न हो, मुख्य भनरीिक-सह- सुभिधाकताष भलभखत
आदेश द्वारा और उसमें बताई गई शतों के अधीन, इस ऑपरेशन को करन े से छूट दे सकता ह:ै
यह िी कहा गया ह ै कक खुदाई ककए जा रह े शाफ्ट में इस्तमे ाल होन े िाले भिटैडचंग हुक को हर हफ़्त े कम
से कम एक बार अलग ककया जाएगा, साफ़ ककया जाएगा और ध्यान से जांच की जाएगी और हर बार ऐसी
जांच के बाद भशयर भपन को एक नए स े बदल कदया जाएगा।
(ख) सेफ्टी-हुक के कनेक्शन में इस्तेमाल होने िाली हर भिटैडचगं बेल या प्लेट की जांच की जाएगी,
और उसमें ओपडनंग को कैलीपसष या गेज से हर तीस कदन में कम से कम एक बार चेक ककया जाएगा।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 81
(ग) इस उप-भनयमन के अंतगषत अपेभित संचालन और जाचं इंजीभनयर या अन्य सिम व्यभक्त द्वारा या
उसकी देख-रेख में की जाएगी, जो उस तारीख और अन्य भििरर्ों को इस उद्देश्य के भलए रखी गई भजल्दबंद
पृष्ठ िाली पुभस्तका में या पुनः प्राप्त करने योग्य तिा गरै -संपादन योग्य इलेक्ट्रॉभनक रूप में दजष करेगा, और
उस पर हस्तािर या ई-हस्तािर करेगा और तारीख िालगे ा।
84. ररकैडपगं आकद के बाद सािधाभनया ं - (1) ककसी रस्सी की प्रत्येक स्िापना या ररकैडपंग के बाद और ककसी
िी भनलंबन भगयर के प्रत्येक निीकरर् या ररकफटटंग के बाद, इंजीभनयर या अन्य सिम व्यभक्त, सामिी से पूरी
तरह िरे हुए डपंजरों या पररिहन के अन्य साधनों के शाफ्ट के कामकाजी भहस्से के ऊपर और नीचे पांच चक्कर
लगाने के बाद, कैपेल और भनलंबन भगयर के अन्य भहस्सों की जांच करेगा ताकक यह देखा जा सके कक िे उभचत
कायष भस्िभत में ह।ैं
(2) उप-भिभनयम (1) के अन्तगषत की गई प्रत्येक जांच की ररपोटष इस प्रयोजन के भलए रखी गई भजल्दबंद पृष्ठ
पुभस्तका में या पुनप्राषभप्त योग्य तिा असंपादन योग्य इलैक्ट्रॉभनक प्रारूप में दजष की जाएगी और जांच करने िाल े
व्यभक्त द्वारा उस पर हस्तािर या ई-हस्तािर ककए जाएगं े तिा कदनांक िाला जाएगा।
85. िाइंडिगं उपकरर् की जाचं .- (1) इंजीभनयर या अन्य सिम व्यभक्त का यह कतव्यष होगा कक िह
भनम्नभलभखत की जाचं करे-
(क) प्रत्येक चौबीस घण्टे में कम से कम एक बार,-
(i) िम से िाइंडिंग रस्सी का अटैचमेंट, िेप्ि इंभिकेटर, शाफ्ट में सस्पेंशन भगयर का हर भहस्सा, भजसमें केज
या आने-जाने के दसू रे साधन और उनके गेट शाभमल ह,ैं और िाइंडिंग उपकरर् का हर बाहरी भहस्सा,
भजसके ठीक से काम करन े पर लोगों की सुरिा भनिरष करती ह;ै और
(ii) िाइंडिंग इंजन के ब्रेक;
(ख) प्रत् यके सात कदन में कम से कम एक बार :-
(i) रस्स ी को एक मीटर प्रभत सेकण् ि से अनभधक गभत पर गुजराते हुए प्रत् येक िाइंडिगं रस्स ी की; और
(ii) िाइंडिंग इंजन के बाहरी िागों, गाइिों और शाफ्ट में लगाए गए संकेत देने िाल े तंत्र की;
(iii) शाफ्ट कफटटंग भजसमें बंटन, गाइि रेल, गाइि रस्सी, केज गाइि शू और गाइि रेल के बीच गैप और
जॉइंट बोल्ट टॉकष शाभमल ह;ैं
(ग) प्रत् यके तीस कदन में, कम से कम एक बार:
(i) प्रत् यके िाइंडिंग रस्स ी की, रस्स ी को 0.5 मीटर प्रभत सेकण् ि से अनभधक गभत से गुजारते हुए, और इस
परीिा के प्रयोजन के भलए रस्स ी पर के भिभशष्ट रूप स े िययोग् य प्रत् येक स्ि ान पर जमा हुआ मैल और िीज
साफ कर कदया जाएगा, और अन् य स्ि ानों पर रस्स ी की पूरी लंबाई में कम से कम तीस मीटर की दरू ी पर, और
रस्स ी की पररभध में कोई कमी और भघसाई, संिारर्, िगं ुरता और िंग की दभृ ष्ट से प्रत् येक ऐसे स्ि ान पर तार
की ऊपरी दशा देखी जाएगी;
(ii) शीि, स्पोक, एक्सल और शीि के बीयटरंग आकद की सामान्य भस्िभत;82 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(घ) हर छह महीने में कम स े कम एक बार:-
(i) िूि और शीि या पुली के ट्रेि पर सामिी की मोटाई की जांच उपयुक्त मोल्ि द्वारा की जाएगी और शीि को
नए स्िाभपत होने पर बनाए गए मोल्ि के िाइंग के साि तुलना की जाएगी;
(ii) िाइंडिंग रभस्सयों, िाइंडिंग इंस्टालेशन के महत्िपूर्ष घटकों, जैस े िम शाफ्ट, ब्रेक टाई रॉि, सस्पेंशन भगयर
आकद का गैर-भिनाशकारी परीिर् (नॉन-कदस्ट्रभक्टि टेस्ट) ककया जाएगा, और ऐसे परीिर्ों के पररर्ामस्िरूप
पाई गई ककसी िी हाभनकारक दरार या दोर् की सचू ना तुरंत िेत्रीय भनरीिक-सह-सभु िधाकताष को दी जाएगी
और ऐसे घटकों का उपयोग तत्काल बंद कर कदया जाएगा।
(ि.) प्रत् यके बारह मास में कम से कम एक बार, उसके िीतरी िागों की दशा की दभृ ष्ट से, िाइंडिंग इंजन की।
(2) माभलक, अभिकताष, प्रबंधक, इंजीभनयर यह सुभनभित करेगा कक,
(i) हिे भगयर की संरचनात्मक ऑभिट, राष्ट्रीय परीिर् एिं अंशांकन प्रयोगशालाओं (एनएबीएल) द्वारा
प्रत्याभयत अििा सरकार द्वारा अनुमोकदत ककसी संगठन द्वारा पांच िर्ष में एक बार की जाए; और
(ii) िाइंडिंग संस्िापना की भस्िभत का पता लगाने के भलए कंिीशन बेस्ि मॉनीटटरंग भसस्टम स्िाभपत और
अनुरभित की जाए।
(3) उप-भिभनयम (1) के अधीन ऐसी प्रत् येक परीिा की ररपोटष,इस प्रयोजन के भलए रखी गई भजल् दबि पृष्ठ
संख् यांककत पुभस्तका या पुनः प्राप्त करने योग्य या गैर-सपं ादन योग्य इलेक्ट्रॉभनक रूप में में भलखी जाएगी और
जांच करने िाले व् यभक्त द्वारा उस पर हस्त ािर/ई-हस्तािर करके तारीख िाली जाएगी।
(4) यकद उप-भिभनयम (1) एिं (2) के अधीन परीिा करने पर, ककसी ऐसी कमजोरी या त्रुरट का पता लगता ह,ै
भजससे व् यभक्तयों की सुरिा खतरे में हो तो ऐसी कमजोरी या त्रुरट की तुरन् त, भलभखत रूप में इंजीभनयर या अन् य
सिम व् यभक्त और प्रबंधक को ररपोटष की जाएगी, और जब तक ऐसी कमजोरी या त्रुरट ठीक नहीं कर दी जाती
िाइंडिंग संस्ि ापन का प्रयोग नहीं ककया जाएगा।
86. फाटक और बाड़.– –(1) प्रत् येक शाफ्ट के भशखर पर और प्रयोग में आनेिाले प्रत् येक इनसेट पर यिोभचत
फाटकों और बाड़ों की व् यिस्ि ा की जाएगी जो ऐसे सब समयों पर जब कोई डपंजर या अन् य प्रिहर्-साधन
इनसेट या भशखर पर न हो, शाफ्ट में खुलने िाली सब भििृभतयों को प्रिािी रूप में बन् द कर दें। शाफ्ट के भशखर
पर प्रत्य ेक ऐसा फाटक स् ियं-चाभलत होगा और िाइंडिंग इंजन के सचं ालन के साि इंटलोक्ि होगा I
(2) (क) प्रत् येक लैंडिंग पर जहाँ व् यभक्तयों को शाफ्ट के एक ओर से दसू री ओर जाना आिश् यक हो, एक उपमागष
की व् यिस् िा की जाएगी भजससे िे शाफ्ट में प्रिेश या उसे पार ककए भबना ऐसा कर सकें और इस प्रकार
व् यिभस्ित उपमागष ऊँचाई में 1.8 मीटर और चौड़ाई में 1.2 मीटर से कम नहीं होगा, भजसे सब बाधाओं स े
मुक् त रखा जाएगा।
(ख) कोई िी व्यभक्त ककसी िी िर्किंग शाफ्ट के नीचे खलु ी जगह में तिी घुसेगा या उसे पार करने की इजाज़त
होगी, जब िह ककसी डपंजरे या आने-जान े के दसू रे साधन में घुसन े या बाहर भनकलने के भलए हो, या उसमें कोई
जांच, मरम्मत या कोई और काम करने के भलए हो; और ककसी िी व्यभक्त को ऐसी ककसी िी जगह पर तब तक
काम करने की इजाज़त नहीं दी जाएगी, जब तक कक डपंजरे या आने-जाने के दसू रे साधन, अगर कोई हों, रोक
न कदए गए हों और ऐसे व्यभक्त की सुरिा के भलए पूरी सािधानी न बरती गई हो।
87. शाफ्ट म ें चढन े या काम करन े िाल े व्य भक्तयों के कतव्ष य .– - (1) ककसी डपंजर या अन् य प्रिहर्-साधन को
चलने का संकेत दे कदए जाने के बाद कोई व् यभक्त न उस पर चढेगा न उससे उतरेगा, न तब तक उसे छोड़ेगा जब
तक िह रूकन े के भनयत स्ि ान पर नहीं पहुचँ जाता, और कोई व् यभक्त ककसी डपंजर या अन् य प्रिहर् साधन के
ककनारे या छत पर तब के भसिाय नहीं चढेगा जब िह शाफ्ट में कोई परीिा, मरम्म त या अन् य कायष करने म ें
लगा हो।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 83
2) प्रत्येक व्यभक्त, जब िह शाफ्ट या ककसी इनसेट के ऊपर या नीचे हो, तो उसे भपट टॉप अटेंिेंट या बेलमैन,
जैसी िी भस्िभत हो, के िैध आदेशों और भनदेशों का पालन करना होगा।
(3) (क) भजस समय िाइंडिंग प्रककयाएँ चल रही हों त ब कोई व् यभक्त शाफ्ट में कोई परीिा, मरम् मत या अन् य
कायष नहीं करेगा, और भजस समय ऐसी परीिा, मरम् मत या अन् य कायष में व् यभक्त लगे हों, िाइंडिंग न की जाएगी
और न करन े दी जाएगी भसिाय तब के जबकक िाइंडिंग उसके भलए आिश् यक हो।
(ख) ककसी िी शाफ्ट में ककसी िी जांच, मरम्मत या काम का तुरंत इंचाजष भपट टॉप अटेंिेंट या बेलमैन और
िाइंडिंग इंजन ऑपरेटर को बताएगा कक ऐसी जांच, मरम्मत या काम होने िाला ह;ै
(ग) शाफ्ट में ककसी परीिा, मरम् मत या अन् य कायष में लगे होने के समय प्रत् येक व्य भक्त के साि कम स े कम
एक व् यभक्त और रहगे ा, और ऐसे सिी व् यभक्तयों के भलए ऐसे प्रकार का सरु िा पेटी (सेफ्टी बेल्ट ) का प्रबंध ककया
जाएगा जो मुख् य भनरीिक द्वारा अनुमोकदत हो और िे भगरने की जोभखम से प्रिािी रूप से संरभित ककए गए
हों।
(घ) शाफ्ट में ककसी परीिा, मरम् मत या अन् य कायष में लगे हुए प्रत् येक व् यभक्त को, ऊपर से भगरने िाले पदािों
से, ककसी उपयुक् त आच् छादन के द्वारा संरभित ककया जाएगा और प्रत् येक ऐस े व् यभक्त को एक संरिात् मक टोपी
िी दी जाएगी, और काम करते समय उसे िही टोपी पहननी होगी।
88. सामान्य सािधाभनया.ं - (1) ककसी िी अनभधकृत व्यभक्त को िाइंडिंग इंजन कि म ें प्रिेश करने की अनुमभत
नहीं दी जाएगी।
(2) कोई िी ककशोर ककसी डपंजरे या अन्य पररिहन साधन से शाफ़्ट से नीचे या ऊपर नहीं जाएगा जब तक
कक उसके साि एक या एक से अभधक ियस्क पुरुर् न हों।84 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय- आठ
हॉलजे
89. हॉलजे रास्त.े - (1) ककसी खान में जहाँ सामभियाँ टबों में, गुरूत् िाकर्षर् शभक्त या यांभत्रक शभक्त के द्वारा,
ले जाई जाती ह,ैं िहाँ सिी सड़कों या सड़क-मागो के संबंध में उप-भिभनयम (2) से उप-भिभनयम (20) के
उपबन् ध लागू होंगे।
(2) ऐसा प्रत् येक रास्ता -
(क) पयाषप्त आकार का, और यिासाध् य, सीधा और भनयभमत ढलान का होगा; और
(ख) पटररयों को पयाषप्त सेक्शन की रेलों के साि ठीक से भबछाया जाना चाभहए।
(3) (क) पुली, शीि और रोलर, जो ककसी रस्स ी की कदशा को बदलें, सरु भित रूप से भस्िर ककए जाएँगे।
(ख) कोई िी व् यभक्त ककसी गभतमान रस्स े को िम, पुली, चरखी या रोलर पर भबना लीिर या अन् य उभचत
साभधत के समायोभजत नहीं करेगा।
(4) जहाँ हॉलेज एक या अभधक रभस्सयों के द्वारा ककया जाता हैं, िहा ँ भनम् नभलभखत की व् यिस् िा की जाएगी
और बनाई रखी जाएगी:-
(क) प्रत् येक अधस्त ल के भशखर पर कम से कम एक स्ट ॉप-ब् लॉक या अन् य प्रिािी प्रयुभक्त, जो टबों को भनयंत्रर्
के बाहर िागने या जाने से रोके रखे; और
(ख) प्रिम स्ट ॉप-ब् लॉक या अन् य प्रिािी प्रयुभक्त के नीचे ककसी टबों के संिगष या ट्रेन की लंबाई से अभधक
फासले पर कम स े कम एक रन अिे भस्िच या अन् य प्रिािी प्रयुभक्त :
बशते कक ऐसा फासला टबों के संिगष या ट्रेन की लंबाई से दस मीटर से अभधक नहीं बढगे ा:
बशते, यह और कक जहाँ िेत्रीय भनरीिक सह सुभिधाकताष भलभखत आदेश द्वारा ऐसी अपेिा करें िहा ँ
पूिोक् त स्ट ॉप-ब् लॉक और रनअिे भस्िच या अन् य प्रिािी प्रयुभक्त, इस प्रकार अन् त:युभग्मत रहगें े कक ि े एक साि
प्रिािहीन न हो जाएँ।
(ग) ऊपर जाते हुए टब, टबों के संिगष या टबों की ट्रेन के पीछे बैक-स्ट े, िैग या अन् य उपयुक् त प्रयुभक्त का
संलग् न ककया जाना जो टब, टबों के संिगष या टबों की ट्रेन को पीछे िागने से रोकें।
बशते हाँ ककसी छोरहीन रस्स ी या जंजीर का प्रयोग ककया जाता ह,ै िहाँ, यकद ऊपर जाते हुए टबों को
पीछे िागने से रोकने के भलए रास्त े पर साि-साि उपयुक् त अन् तरालों पर उपयुक् त स् ियं लगने िाली प्रिाभहयों
या अन् य प्रिािी प्रयुभक्तयों की व् यिस् िा कर दी जाती ह,ै तो यह समझा जाएगा कक इस खण्ि के उपबंधों का
अनुपालन हो गया ह ै :
बशते यह और कक िेत्रीय भनरीिक सह सुभिधाकताष भलभखत आदेश द्वारा और उन शतों के अधीन जो
उसमें भिभनर्दषष् ट ककया जा सकता ह,ै इस आधार पर कक इस खंि के उपबंधों का अनुपालन उभचत रूप से साध् य
नहीं ह,ै उनके अनुपालन से छूट दे सकेगा;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 85
(घ) सामने की कदशा में िागने से रोकने के भलए सरु िा हुकें, जजै -रेलें या अन् य उपयुक् त प्रयुभक्तयाँ;
(ि.) 250 मीटर स े अनभधक के अन् तरालों पर टब-रररेलर :
बशते कक जहा ँ ककसी टब को पटररयों पर हािों द्वारा कफर स े चढाया जाता है, िहाँ या तो िह रस्स ी या
रभस्सयों से भिलग् न कर कदया जाएगा या रभस्सयों को चलाने िाला इंजन रोक कदया जाएगा;
(च) लंबाई में तीस मीटर स े अभधक प्रत्य ेक हॉलेज रास्तापर, रास्तापर के प्रत्य ेक रूकने के स् िान से उस स् िान
को जहाँ रस्स ी को चलाने िाली मशीनरी चलाई जाती ह,ै संकेतों के सम् प्रेर्र् के भलए यांभत्रक या भिद्यतु प्रिािी
या इलेक्ट्रॉभनक साधन का इस्तेमाल ककया जाएगा :
बशते कक, िेत्रीय भनरीिक सह सुभिधाकताष भलभखत आदेश द्वारा संकेतों को उल् टी कदशा में सम् प्रेभर्त
करने के साधनों की िी अपेिा कर सकेगा;
(छ) यकद इस भिर्य में कक खंि (च) के अधीन संकेत सम् प्रेभर्त करन े के कोई साधन प्रिािी ह ैं या नहीं कोई
संदेह उत् पन् न हो, तो िह मुख्य भनरीिक सह सुभिधाकताष को भिभनश् चय के भलए संदर्िषत की जाएगी।
(5) संकेतों की भनम्न भलभखत प्रर्ाली का प्रयोग और कड़ाई से अनुपालन ककया जाएगा, अिाषत् -
एक प्रहार : रोको, जब गभतमान हो
दो प्रहार : उतारो या मन् द गभत स े अन् दर खींचों
तीन प्रहार : चालू करो जब गभतहीन हो
चार प्रहार : उठाओ या मन् द गभत से बाहर को खींचों:
बशते कक, कोई अन् य संकेत पूिषगामी संकेतों के अभतररक् त होंगे और उनमें हस्त िेप नहीं करेंगे।
(6) अभतररक् त संकेतों के, यकद कोई हों, सभहत उप-भिभनयम (5) के अधीन संकेतों की प्रर्ाली की एक मुकद्रत
प्रभत अंिेजी, डहदं ी और अभधकांश श्रभमकों द्वारा समझी जाने िाली िार्ा में, सदश्ृ य रूप में उस स्ि ान म ें जहा ँ
रस्स ी को चलाने िाली मशीनरी चलती ह ै और रास्ता के साि-साि प्रत् येक भनयभमत रूकने के स्ि ान पर िी
लगाई जाएगी।
(7) सिम व् यभक्त या पदधारी से भिन् न कोई व् यभक्त कोई संकेत नहीं देगा।
(8) जहा ं ककसी िूभमगत खदान में, ढुलाई मागों (और कन्िेयर, यकद कोई हो) की एक प्रर्ाली शाफ्ट या खदान
के प्रिेश द्वार से 300 मीटर से अभधक दरू ी तक फैली हुई है, तो ऐसी प्रत्येक प्रर्ाली के अंत और हालेज
आपरेटर(और कन्िेयर आपरेटर, यकद कोई हो) तिा शाफ्ट के तल और शीर्ष तिा खदान के प्रिेश द्वार के बीच,
जैसा िी मामला हो, कुशल टेलीफोन संचार प्रदान ककया जाएगा और बनाए रखा जाएगा:
बशते कक जहाँ यात्रा बहुत करठन हो, िहाँ िेत्रीय भनरीिक सह सुभिधाकताष , भलभखत आदेश द्वारा,
ककसी अन् य दशा में िी टेलीफोन द्वारा संपकष की व् यिस् िा करन े और बनाए रखन े की अपेिा कर सकेगा।
बशते कक यह और कक, मुख्य भनरीिक सह सुभिधाकताष द्वारा सामान्य या भिशेर् आदेश से अनुमोकदत
िायरलेस या मोबाइल संचार या ककसी अन्य प्रर्ाली का उपयोग ककया जा सकता ह।ै
(9) जहाँ टेलीफोन या भिद्यतु भसग्न लों की व् यिस् िा की जाए,86 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(क) भसग् नल और टेलीफोन के तारों को अन् य तारों और भिद्यतु उपस्क र से संपकष में आन े से रोकने के भलए
उभचत पूिाषिधाभनयाँ बरती जाएँगी;
(ख) भसग्न ल के तार इंसुलटे रों पर आलंभबत ककए जाएगँ े, और तीस िोल्ट से अभधक ऊजाष से युक् त नहीं ककए
जाएँगे;
(ग) संस्प शष-कारक इस प्रकार से बनाए जाएँगे कक पररपि का आकभस्मक पूर्ष हो जाना रोक सकें; और
(घ) प्रत् येक भद्वतीय एिं तृतीय भििी गैसीय सीमों में समस्त भसग् नल या टेलीफोन के संपकष-पररपि इस प्रकार
भनर्मषत, संस्ि ाभपत, सरं भित, प्रचाभलत और अनुरभित होंगे कक िे मूलिूत रूप से सरु भित हों।
(10) उन स्ि ानों पर जहाँ टेलीफोन ररसीिर संस्ि ाभपत हों या जहा ँ भसग् नल और भनरापद प्रयुभक्तयाँ भनयभमत
रूप स े प्रचाभलत होती हों, प्रत् येक टेलीफोन के प्रयोग करने िाल े या ऐसे ककसी भसग् नल या भनरापद प्रयुभक्त को
प्रचाभलत करने िाले व् यभक्त को भनयंत्रर् से बाहर चलने िाले टबों से पयाषप्त संरिर् कदया जाएगा।
(11) जहाँ ककसी व् यभक्त को उस समय काम करने या चलने कदया जाता ह ै जब हॉलेज गभतमान हो िहाँ दस
मीटर से अनभधक अन् तरालों पर आश्रय के भलए मैनहोलों की व् यिस् िा की जाएगी:
बशते कक जहाँ ढाल छ: में एक से कम ह ै िहाँ ऐसे मनै होलों की व् यिस् िा बीस मीटर से अनभधक
अन् तरालों पर की जा सकेगी।
(12) मैनहोल ऊँचाई में 1.8 मीटर और गहराई में 1.2 मीटर से कम नहीं होंगे और चौड़ाई में 0.75 मीटर स े
कम या एक मीटर स े अभधक नहीं होंगे:
बशते कक जहाँ रास्ताऊँचाई में 1.8 मीटर से कम है, िहा ँ मैनहोल सड़क की पूरी ऊँचाई तक बनाए जा
सकेंगे :
बशते कक यह और कक िेत्रीय भनरीिक भलभखत आदेश द्वारा, और उन शतो के अधीन जो िह उनम ें
भिभनर्दषष् ट करे, हॉलजे मागष से भिन् न पूिोक् त से बड़े पररमार्ें की क्रास सड़कों का मने होलों के रूप में उपयोग
अनुज्ञात कर सकेगा।
(13) जहा ँ उप-भिभनयम (11) और (12) में यिा भिभनर्दषष्ट मैनहोलों की व् यिस् िा करन े में गंिीर व् यािहाररक
करठनाइयाँ हो िहा ँ िेत्रीय भनरीिक सह सुभिधाकताष ,भलभखत आदेश, द्वारा और उन शतो के अधीन जो िह
उसमें भिभनर्दषष् ट करे, मैनहोलों का अभधक अन् तरालों पर और अन् य पररमार्ों का होना,अनुज्ञात कर सकेगा।
(14) प्रत् येक मैनहोल साफ और बाधा-रभहत रखा जाएगा और िीतर से तिा भछद्र के चारों ओर 0.3 मीटर
से अन् यून दरू ी तक दोनों ही सफेदी से पुता हुआ होगा और उस पुते हुए िाग का रख-रखाि ककया जाएगा |
(15) सब मैनहोलों की व् यिस्ि ा हॉलेज रास्ताके यिासाध्य एक ही ओर की जाएगी।
(16) िहाँ के भसिाय जहाँ हॉलेज ककसी छोर-हीन रस्स ी या जंजीर के द्वारा ककया जाता ह ै जब िी हॉलेज रस्स ी
गभतमान हो हॉलेज रास्तापर प्रत्य ेक व् यभक्त मैनहोल में आश्रय लेगा।
(17) प्रबन् धक भलभखत आदेश द्वारा प्रत् येक हॉलेज रास्ताया सड़क के संबंध में िाररत या िार-रभहत टबों की
अभधकतम संख् या, भनयत करेगा, भजन् ह ें एक संिगष या ट्रेन के रूप में चलने के भलए जोड़ा जा सके और इस प्रकार
भनयत संख् या को भिभनर्दषष् ट करते हुए एक सचू ना सुदश्ृ य रूप में भशखर पर और हॉलेज सड़क या रास्तापर के
रूकने के सब भनयभमत स् िानों पर लगाई जाएगी।
(18) उन सब स्ि ानों पर जहाँ टब जोड़े या अलग ककए जाते है,-
(क) टबों और रास्ताके एक पाश्ि ष के बीच और[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 87
(ख) जहा ँ दो या अभधक मागष हो, पाश्ि स्ष ि मागो के बीच िी; कम स े कम एक मीटर का साफ स्ि ान रखा
जाएगा।
(19) जब कोई रास्ताया फेस ककसी हॉलेज मागष के साि सीधी रेखा में हो और चलत े हुए टबों से व् यभक्तयों को
खतरे की आशंका हो तब ऐस खतरे को रोकन े के भलए एक दढृ बफर या अन् य प्रिािरी प्रयुभक्त की व् यिस् िा की
जाएगी और उसे बनाए रखा जाएगा।
(20) मुख् य हॉलेज सड़क या रास्तासे भनकलते हुए प्रत्य ेक ट्राम रास्ताके प्रिेश स्ि ान के समीप, और प्रत् येक
सड़क पर, भजसका ढाल ककसी शाफ्ट की तरफ है, एक स्ट ॉप-ब् लॉक या अन् य प्रिािी प्रयुभक्त की व् यिस् िा की
जाएगी।
90. आन े जान े का रास्ता :- (1) भसिाय तब के जब ित्रे ीय भनरीिक द्वारा भलभखत रूप में छूट दे दी गई हो,
और उन शतो के अधीन जो उसमें भिभनर्दषष् ट ककया जा सकता ह ै , व् यभक्तयों के अपने काय ष स्ि लों की ओर स े
यात्रा करन े के भलए ऐसे हॉलजे रास्ता स े पृिक, भजन पर हॉलेज यांभत्रक साधनों या गरूु त् िाकर्षर् शभक्त स े होता
ह,ै अन् तिाषही िायुमागो में यात्रा के रास्ता की व् यिस् िा की जाएगी।
(2) यात्रा के प्रत्य ेक चलने के मागष को भनम् नभलभखत उपबंध लागू होंगे, अिाषत् -
(क) िह उसके पूरे लंबाई पर कहीं िी 1.8 मीटर से कम ऊँचा नहीं होगा;
(ख) उसके भलए जहा ँ िैभतज स े ढलान 30 भििी से अभधक हो िहा ँ यिोभचत पैभ ियो या सीभ ढयों की व् यिस् िा
की जाएगी;
(ग) जहाँ िैभतज से ढलान 45 भििी से अभधक हो िहा ँ पैभ ियों या सीभ ढयों के अभतररक् त भनरापद यात्रा को
सुभनभित करन े के भलए उन पर हिैं रेलों या रभस्सयों की व्य िस् िा की जाएगी;
(घ) जहाँ िैभतज स े ढलान 60 भििी से अभधक हो िहाँ पैभ ियों या सीभ ढयों और रेडलंग तिा रभस्सयों के
अभतररक् त ढलान के साि मापते हुए दस मीटर स े अनभधक अन् तरालों पर यिोभचत चबूतरों की व् यिस् िा की
जाए;
(ि.) उसके यिोभचत स् िानों पर दरू -संचार सुभिधाओं के प्रिािी साधन की व् यिस् िा की जाएगी; और
(च) पयाषप्त संख् या में अंकीय प्रदशषन पट्ट या अन्य उभचत (भिभजटल भिस् प्ल े बोड्सष) और संचार संद्वार,भजसमें
कोई महत् िपूर्ष संदेश या सूचना िूभम के नीचे कायषरत या िहाँ से गुजरने िाले व्य भक्तयों तक संचाररत या
प्रसाररत की जा सके, की व् यिस् िा की जाएगी।
(3) पदधारी या हॉलेज सहायक से भिन् न प्रत् येक व् यभक्त भनरीिर्, जांच या मरम्म त के प्रयोजनों के भसिाय
यात्रा के आने जाने के रास्त े से ही यात्रा करेगा।
(4) जहा ँ यात्रा के चलन े के रास्ताका प्रयोग करने िाल े व् यभक्तयों को याभं त्रक साधनों या गरूु त् िाकर्षर् शभक्त स े
चाभलत ककसी कन् िेयर या हॉलेज को लांघना हो, िहा ँ उसके ऊपर या नीच े स े जाने िाल े पुल की या िेत्रीय
भनरीिक सह सुभिधाकताष द्वारा भलभखत रूप में अनुमोकदत अन् य यिोभचत युभक्त की व् यिस् िा की जाएगी।
(5) जहा ँ ककसी कन्िेयर रोििे को ट्रैिडलंग रोििे के तौर पर इस्तेमाल करना ज़रूरी हो, िहा ँ कन्िेयर रोिि े
की पूरी लंबाई में, भजस े ट्रैिडलंग रोििे के तौर पर इस्तेमाल ककया जाना है, मज़बूत बनािट िाले सही गािष या
बाड़ लगाए जाएँगे।88 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) यकद आनभत या एभिट के मुहाने से या भपट-अधस्त ल या भपट-बॉटम से यात्रा की दरू ी एक ककलोमीटर स े
अभधक हो, या यात्रा करठन हो, तो माभलक,अभिकताष या प्रबंधक,इन भिभनयमों के प्रिाि में आने की तारीख स े
एक िर्ष के अन् दर, ऐसे उभचत जन-सिारी (मैन-राइडिंग) की व् यिस् िा, जो मुख् य भनरीिक सह सुभिधाकता ष
द्वारा अनुमोकदत हो, करेगा।
(7) लोगों को लाने-ले जाने के भलए ककसी िी तरह के पररिहन या दसू रे मशीनी साधनों का इस्तेमाल मुख् य
भनरीिक सह सभु िधाकताष की भलभखत मंज़ूरी के भबना नहीं ककया जाएगा, और यह उन शतों के अधीन होगा जो
उसमें बताई गई हों।
91. टब और उनका सचं लन.– (1) प्रत् येक टब पर, हर कपडलंग भसरे पर एक मज़बूत बफर लगाया जाएगा
और उसे बनाए रखा जाएगा, जो भसरे से बाहर भनकला हुआ हो और इस तरह से लगाया गया हो कक जब ऐस े
दो टब एक साि हों, तो सबसे अंदरूनी भसरों के बीच का गैप 20 सेंटीमीटर से कम न हो।
(2) प्रयोग में आनेिाले प्रत् येक ऐसे टब के जो पाश्ि ष में झुकता हो, अकस्म ात् झुकाि को रोकने के भलए सुरिा
प्रगाभहयों की व् यिस् िा की जाएगी और कोई टब या टबों का संिगष या टबों की ट्रेन तब तक गभतमान नहीं की
जाएगी जब तक सब भनरापद प्रिाही यिोभचत रूप से सरु भित नहीं कर कदए जाते।
(3) ककसी रस्स ी या लोकोमोरटि और ककसी टब, टबों के संिगष या टबों की ट्रेन के बीच का संयोजक और ककसी
संिगष या ट्रेन के ककन् हीं दो टबों के बीच का संयोजक, इस प्रकार का होगा जो मुख् य भनरीिक सह सुभिधाकता ष
द्वारा साधारर् या भिशेर् आदेश द्वारा अनुमोकदत कर कदया गया हो, और इस प्रकार बनाए रखा जाएगा कक
अकस्म ात् अलग न हो जाए।
(4) प्रयोग में आने िाले प्रत् येक टब के प्रत्य ेक बफर और िाबार और प्रत्य ेक सुरिा प्रिाही, कडप्लंग जंजीर और
अन् य संयोजक की दशा की परीिा प्रभत चौदह कदन में कम से कम एक बार इस प्रयोजन के भलए भनयुक् त सिम
व् यभक्त द्वारा की जाएगी और ऐसी प्रत् येक परीिा की एक ररपोटष इस प्रयोजन के भलए रखी गई भजल् दबि पृष्ठ
संख् यांककत पुभस्तका में या पनु ः प्राप्त करन े योग्य और सपं ादन योग्य न होन े िाले इलेक्ट्रॉभनक रूप में दजष की
जायेगी, भजस पर जांच करने िाले व् यभक्त द्वारा हस्त ािर/ई-हस्तािर करके तारीख िाली जाएगी।
(5) कपडलंग के प्रत्येक घटक का सुरिा गुर्ांक (ककसी िी डबंद ु पर घटक पर ब्रेककंग लोि और उस पर
अभधकतम भस्िर लोि के बीच का अनुपात) अभधकतम भस्िर लोि के संबंध में सात से कम नहीं होगा, भजसे तीन
िर्ष से अभधक के अंतराल पर परीिर् द्वारा सुभनभित ककया जाएगा और उसका ररकॉिष रखा जाएगा।
(6) जैस े ही टब चलाए जाने िाल े हों, उन व् यभक्तयों को चेतािनी दे दी जाएगी भजनका खतरे म ें पड़ना संिाव् य
हो।
(7) दो या अभधक टब हािों द्वारा एक के बाद एक और भनकटस् ि नहीं चलाए जाएँगे ककन् तु उनको जोड़ कर
एक साि चलाया जाएगा:
बशते कक जब दो टबों के बीच की दरू ी ककसी िी समय 10 मीटर से कम हो तो यह समझा जाएगा कक
िे एक के बाद एक ओर भनकटस् ि ह।ैं
(8) कोई व् यभक्त प्रबंधक के भलभखत आदेश के भबना ककसी टब को अभनयंभत्रत रूप से न चलाएगा, न चलिाएगा
और न ऐसा चलना अनुज्ञात करेगा :[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 89
बशते कक िेत्रीय भनरीिक सह सुभिधाकता ष भलभखत आदेश द्वारा, ककसी स्ि ान म ें टबों के अभनयंभत्रत
संचलन को उस दशा में प्रभतभर्ि कर सकेगा जब िह इस राय का हो कक ऐसे सचं लन से खतरा संिाव् य ह।ै
(9) बीस में एक से अभधक ढलान पर टब को ले जाने िाला कोई व् यभक्त टब के आगे नहीं जाएगा, और जब
पररभस्िभतयाँ ऐसी हों कक कोई व् यभक्त टब को उसके पीछे से भनयंभत्रत करने की भस्िभत में नहीं ह ै तो िह टब को
तब तक नीचे नहीं ले जाएगा जब तक उसको भनयंभत्रत करने के भलए स्प्र ैगों या अन् य यिोभचत प्रयुभक्तयों का
उपयोग नहीं ककया जाता।
(10) जहाँ उनका प्रयोग अपेभित हो, िहाँ यिोभचत पदािष से बने और यिोभचत पररमार् के स्प्र ैगों की पयाषप्त
संख् या में व् यिस् िा की जाएगी।
(11) जब कोई टब ऐसे रास्त े पर खड़ा हो भजसका ढलान बीस में एक स े अभधक हो तब, जब तक िह प्रिािी
रूप से ब्रेकों द्वारा रूका न हो या हॉलेज रस्स ी या लोकोमोरटि से संलग् न न हो, प्रिािी रूप से अिरूि कर
कदया जाएगा या जंजीर से, या अन् यिा, बाँध कदया जाएगा।
(12) िहाँ के भसिाय जहाँ हॉलेज छोर-रभहत रस्स ी द्वारा होता ह,ै टबों को यिासाध् य, तिी जोड़ा और अलग
ककया जाएगा जब टब या टबों का संिगष और रस्स ी, यकद िह संिगष से जुड़ी ह,ै गभत में न हो।
(13) यिासाध् य, टब ढलान पर न जोड़े जाएँगे और न अलग ककए जाएँगे।
(14) कोई व् यभक्त टब या हॉलेज-रस्स ी पर नहीं चढेगा।
92. हॉलजे इंजन और इंजन कि. – (1) प्रत् यके हॉलेज-इंजन में भनम्न लगाई जाएगी।
(क) दो स्ितंत्र ब्रेक, भजनमें से कम से कम एक ब्रेक को इस तरह से भिज़ाइन ककया जाएगा कक ब्रेक
संचाभलत होन े के अलािा "चालू" भस्िभत में रह:ें
परंतु जहां ब्रके भबजली से सचं ाभलत होते हैं, उनमें से कम से कम एक को हर समय स्िचाभलत रूप से लागू करन े
की व्यिस्िा की जाएगी यकद भबजली की आपूर्तष भिफल हो जाती ह।ै
(ख) गभत संकेतक, दरू ी संकेतक और ओिर स्पीि रट्रडपंग व्यिस्िा,
(ग) रस्सी के टूटने के कारर् हॉलेज आपरेटर को भव्हपलैश से बचान े के भलए उपयुक्त रोप गािष,
(घ) एक उपयुक्त “ िेिमैन भस्िच”,
(ि.) इंटरलॉककंग व्यिस्िा के साि फॉरििष-ररिसष ऑपरेटटंग भििाइस,
(च) ओिर ट्रैिल प्रोटेक्शन
(छ) आपातकालीन स्टॉप पुश बटन
(2) (क) प्रत्येक हॉलेज इंजन को अच्छी तरह रखे गए इंजन कि मने लगाया जाएगा भजसमें ऑपरेटर के भलए
आपातकालीन भनकास, पयाषप्त रोशनी, िेंरटलेशन और एगोनॉभमक रूप से भिज़ाइन की गई सीट होगी ; और90 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) इंजन की नींि, ब्रेक असेंबली आकद की जांच के भलए पयाषप्त पहुचं प्रदान की जाएगी और बनाए
रखा जाएगा।
93. हॉलजे -रभस्सया.ँ – (1) ककसी िी रस्सी का इस्तेमाल हॉलेज के काम के भलए तब तक नहीं ककया जाएगा,
जब तक उसमें ककसी िी भहस्से में कोई गंिीर कदखाई देने िाला भिफेक्ट हो या उसका सेफ्टी फैक्टर आठ से कम
हो।
(2) प्रत् येक कैप की हुई रस्स ी को, ककसी सिम व् यभक्त के पयषिेिर् में प्रत् येक छ: मास में कम से कम एक बार
और, यकद आिश् यक हो, तो अल् पतर अन् तरालों पर, पुन: कैडपंग की जाएगी।
(3) िायरेक् ट हॉलेज में कोई िी जोड़ िाली रस्स ी प्रयोग नहीं की जाएगी।
(4) प्रयोग में आनेिाली प्रत्य ेक हॉलेज-रस्स ी के भलए आकार, भिभनमाषर्, क् िाभलटी, आपूर्तषकताष का नाम तिा
संस्ि ापन और पुन: कैडपंग की तारीखों का एक अभिलेख इस प्रयोजन के भलए रखी गई भजल् दबि पृष्ठ
संख् यांककत पुभस्तका म ें या पुनः प्राप्त करन े योग्य और संपादन योग्य न होन े िाले इलेक्ट्रॉभनक रूप में रखा
जाएगा; और उसमें सब प्रभिभष्टयाँ सिम व् यभक्त द्वारा की जाएँगी, जो उन पर हस्त ािर/ई-हस्तािर करके
तारीख िालेगा।
94॰ लोडिगं शटू पर बचाि:- (1) प्रत्येक शूट जहां टब और दसू रे ढुलाई के साधन को िरा जाता है , पर सामिी
को रोकने या भस्िर रखने के भलए उभचत गेट या फाटक कदये जाएंगे।
(2) शूट के गेट को चलाने के भलए बनकर से सरु भित दरू ी पर कंट्रोल पैनल रहगे ा।
95. कन्ि ये र स्िापन – (1) प्रत् येक कन्िेयर इस तरह लगाया जाएगा कक- प्रत् येक कन् िेयर इस प्रकार संस्ि ाभपत
की जाएगी कक-
(क) कन् िये र और रास्ते के ककनारे के बीच यात्रा के भलए एक मीटर से अनभधक चौड़ाई की भनबाषध जगह रह;े
(ख) कन् िये र या उसका कोई िाग काष्ठ के अिलंब या सपोटष से रगड़ न खाता हो;
(ग) कन् िये र के िापसी स्ट ेशन की ऐन् कटरंग, फेस या सड़क के सपोटष से मुक् त रह;े
(घ) यकद एक से अभधक बेल्ट कन् िेयर श्रेर्ी में प्रयोग ककए जा रह े हों, तो सरु िा कफटटंग, जैसे क्रभमक भनयंत्रर्
और क्रभमक अन् तबषि (भसक् िेंभसयल इंटरलॉक) लगाया जाएगा; और
(ि.) पुल कॉिष भस्िच या अन्य समुभचत प्रर्ाली की व् यिस् िा द्वारा कन् िेयर की पूरी लंबाई में से ककसी िी जगह
से इस रोका जा सके।
(2)(क)जहाँ कन् िेयर का झकु ाि ऐसा हो कक कफसलत े हुए पदािों या सामिी स े खतरा उत् पन् न करे िहाँ ऐस े
खतरे से पयाषप्त संरिर् देने के भलए यिोभचत युभक्तयों का प्रयोग ककया जाएगा।
(ख) बेल्ट के भलए एक उपयुक्त रोल बैक सरु िा व्यिस्िा प्रदान की जाएगी।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 91
(3) रास्ताके प्रत् येक िाग पर, भजसम ें 30 मीटर स े अभधक दरू ी तक िार ले जान े के भलए कन् िेयर संस्ि ाभपत
हो, सड़क के उस िाग के प्रत् येक स्ि ान से उस स्ि ान को जहाँ कन् िेयर को चलाने िाली मशीनरी चलती हो,
संकेतों के सम् प्रेर्र् के प्रिािी साधनों की व् यिस् िा की जाएगी और उन्ह ें बनाए रखा जाएगा:
बशते कक िेत्रीय भनरीिक सह सुभिधाकताष भलभखत आदशे द्वारा उल् टी कदशा में िी संकेतों के सम् प्रेर्र्
के साधनों की अपेिा कर सकेगा।
(4) कन् िेयर प्रचालक और िह केभबन या स्ि ान जहाँ से कन् िेयर को चलाया जाता है, िहाँ पर प्रसारर्
सुभिधायुक्त प्रिािी दरू -सचं ार साधन लगाया जाएगा, भजसस े प्रचालक कन् िेयर के रास्त े म ें या संस्ि ापन के
ककसी जगह पर मौजूद ककसी िी व् यभक्त को संसूभचत कर सके तिा दरू -संचार की ऐसी प्रर्ाली में भद्वमागी
संचार सुभिधाएँ होंगी।
(5) व् यभक्तयों को बेल्ट कन् िेयर के चालू होने से उत् पन् न तत् काभलक खतरों की चेतािनी देने के भलए कन् िेयर
रास्ता की पूरी लंबाई में दश्ृ य-श्रव् य पूिष-संकक्रया चेतािनी एलामष िी लगाया जाएगा।
(6) (क) प्रबंधक िूभमगत कन्िेयर की सुरभित स्िापना, संचालन, रखरखाि और उपयोग के भलए एक मानक
संचालन प्रकक्रया तैयार करेगा, भजसमें कन्िेयर का भिस्तार और उसे खदान में एक स्िान से दसू रे स्िान पर
स्िानांतररत करना शाभमल है, और िूभमगत कन्िेयर की स्िापना शुरू होने से कम स े कम तीस कदन पहले इस े
िेत्रीय भनरीिक-सह-सुभिधाकताष को प्रस्ततु करेगा; और िेत्रीय भनरीिक-सह-सुभिधाकताष ककसी िी समय
भलभखत आदेश द्वारा मानक संचालन प्रकक्रया म ें ऐस े संशोधन की मांग कर सकता है, जैसा िह सुरिा के भहत में
उभचत समझे।
(ख) िूभमगत खदान म े या खुली खदान के सीभमत स्िान म े प्रयोग की जान े िाली कनिेयरअभिरोधी प्रकार का
होगा।
(7) प्रबंधक और इंजीभनयर, दोनों मानक संचालन प्रकक्रया के कायाषन्ि यन के भलए उत् तरदायी होंगे।
(8) बेल्ट कन् िेयर भनम् नभलभखत दशाओं में स्ि त: रूक जाए, यह सुभनभित करने के भलए पयाषप्त व् यिस् िा की
जाएगी;
(क) बेल् ट तिा िम,रोलर, स्क्र ैपर, भिफ्लेक् टर, गाइड्स के बीच अत् यभधक घर्षर् की भस्िभत या छलकाि या
ककसी अन् य कारर् स े होने िाले बाधा के कारर्;;
(ख) िम के ऊपर बेल्ट के छ्लकाि की भस्िभत में;
(ग) बेल् ट के टूटने की भस्िभत में; और
(घ) बेल्ट कन् िये र में या उसके आस-पास आग या तपन की भस्िभत में।
96. हॉलजे -इंजनों, रस्सा और ट्रैक इत्याकद की जाचं .– (1) सिम व् यभक्त का यह कतषव्य होगा कक, -
(क) प्रत् येक हॉलजे -इंजन, ब्रेक-पभहए, रस्स ी और प्रयोग में आने िाल े प्रत् येक साधन की प्रभत चौबीस घंटों म ें कम
से कम एक बार; और
(ख) प्रत् येक रास्त े की, जहाँ हॉलेज यांभत्रक शभक्त या गरूु त् िाकर्षर् शभक्त के द्वारा होता ह ै और उस पर लगाई
गई प्रत्य के सुरिा प्रयुभक्त की, प्रभत सात कदन में कम से कम एक बार;92 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
सािधानी स े परीिा करे।
(2) उप-भिभनयम (1) के अधीन ऐसी प्रत् येक परीिा की ररपोटष, इस प्रयोजन के भलए रखी गई, भजल् दबि पृष्ठ
संख् यांककत पुभस्तका म ें या पुनः प्राप्त करने योग्य और संपादन योग्य न होन े िाले इलेक्ट्रॉभनक रूप में भलखी
जाएगी और परीिा करने िाले व् यभक्त द्वारा उस पर हस्त ािर/ई-हस्तािर करके तारीख िाली जाएगी।
97. हॉलजे और यात्रा के रास्तों की परीिा.– खनन पयिष ेिक या अन् य सिम व् यभक्त का यह कतषव् य होगा कक
प्रभत सात कदन में कम से कम एक बार प्रयोग में आने िाले खान के भनकासों को जाने िाली सड़कों सभहत, सिी
हॉलेज और यात्रा की सड़कों और रास्तोंकी दशा की सािधानी से परीिा करे और प्रत् येक ऐसी परीिा की
ररपोटष इस प्रयोजन के भलए रखी गई भजल् दबि पृष्ठ संख् यांककत पुभस्तका में या पनु ः प्राप्त करन े योग्य और
संपादन योग्य न होने िाले इलेक्ट्रॉभनक रूप में भलखी जाएगी और परीिा करने िाले व् यभक्त द्वारा उस पर
हस्त ािर/ई-हस्तािर करके तारीख िाली जाएगी।
98. लोकोमोरटि.– (1) मुख् य भनरीिक सह सुभिधाकताष की भलभखत अनुज्ञा के अनुसार ही और उन शतों के
अधीन ही जो उसम ें भिभनर्दष्ष ट ककया जा सकता है , ककसी लोकोमोरटि को िूभम के नीचे प्रयोग में लाया
जाएगा, अन् यिा नहीं।
(2) जहाँ रास्त े की ढाल पन् द्रह में एक स े अभधक हो िहाँ कोई लोकोमोरटि प्रयोग में नहीं लाया जाएगा।
(3) चालक से भिन् न कोई व् यभक्त, जब तक ऐसा करने को िह प्रबंधक द्वारा भलभखत रूप से प्राभधकृत न कर कदया
गया हो तब तक लोकोमोरटि पर नहीं चढेगा।
(4) शंटटंग की संकक्रयाओं के दौरानको छोड़कर ,लोकोमोरटि को टबों, या टबों के संिगष या टबों की ट्रेन के आग े
चलाया जाएगा।
99. ट्रकों और िम्प रों के भलए सड़क.– ढुलाई पि (भजसमें रैम् प िी शाभमल ह)ै और पारापेट िाल या तटबन् ध या
बमष, जो कक ककसी ऐसी सड़क की लंबाई के ककनारे, जो अपने आस-पास के िेत्र की सतह से ऊपर हो, या कोई
स्प ाइल िम् प के या धाभत्िक-िम् प के ककनारे हो, का भिजायन भिभनमाषर्, पररमाप और भिन् यास, मुख् य भनरीिक
सह सुभिधाकताष द्वारा सामान् य भलभखत आदेश में भिभनर्दषष् ट मानकों और प्राचलों के अनुसार ककया जाएगा।
100. िगै नों का सचं लन.– (1) रेल िैगनों का संचालन ककसी सिम व् यभक्त के पयषिेिर् में ककया जाएगा।
(2) भजन व् यभक्तयों को खतरे में पड़न े की संिािना ह,ै उन्ह ें ऑभियो-भिजुअल िार्नगिं अलामष से चेतािनी दी
जाएगी।
(3) कोई व् यभक्त ककसी िैगन को बफर पर धक्क ा लगा कर या आग े स े खींचकर न चलाएगा और न चलाने का
प्रयत् न करेगा।
(4) जब प्राकृभतक रोशनी कम हो, तो ककसी िी लोकोमोरटि या िैगन को नहीं चलाया जाएगा, जब तक कक
आने िाले भसरे को एक उपयुक्त लाइट से पहचाना न जाए या उसके साि कोई व्यभक्त लैंप लेकर न चल रहा हो।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 93
(5) न कोई व् यभक्त भबन या स्क्रीन के नीचे चलते हुए िगै न के सामने स े गुजरेगा, न हीं चलत े िैगन और भबन
या स्क्रीन के नीच े िाली ढांचा से गुजरेगा।
(6) कोई व् यभक्त चलते हुए लोकोमोरटि या िैगन के बफर पर तब तक नहीं रहगें े जब तक कोई सुदढृ
हस्त ािलंब न हो’ या िे उस पर तब तक खड़े नहीं होंगे जब तक कोई सुरभित फूट-प्ल टे न हो।
(7) कोई व् यभक्त ककन् हीं दो बैगनों के बीच के कडप्लंग के ऊपर से होकर,जब िैगन चल रही हों, नहीं गुजरेगा।
(8) कोई व् यभक्त पटररयों की लाइन को रेंगकर या ट्रेन या िैगन के नीचे से गुजर कर, पार नहीं करेगा और न
कोई व् यभक्त िैगन के नीचे बैठेगा या सोएगा।
(9) जहा ँ रेल िैगन खास तौर पर ऐसे खड़े ककए जाते ह ैं कक आम रास्त ा दे सकें, तो ऐसा आम रास्त ा चौड़ाई म ें
पाँच मीटर से कम नहीं होगा।
(10) रेलपि के ककसी तरफ 1.2 मीटर के अन् दर कोई सामिी न रखी जाएगी और न जमा की जाएगी।
(11) रेलों के बीच भस्िचों और क्रॉडसंग पर की समस्त जगह भजसमें ककसी व् यभक्त का पैर फंस सकता हो कंक्रीट,
कोलतार, ऐसफाल् ट या लकड़ी के ब्लॉकस से िरी रखी जाएगी।
101. बाड़ और फाटक.– (1) जहाँ कोई हॉलेज सड़क, ट्राम पटरी, रेल-पटरी या ढल़ु ाई पि ककसी लोक माग ष
के ऊपर से गुजरती ह ै िहाँ चलते हुए टब, टबों के संिग ष या टबों की ट्रेन या लोकोमोरटि या मशीनरी से होन े
िाले खतरे से जन साधारर् को बचाने के भलए यिोभचत फाटकों की व् यिस् िा की जाएगी और प्रत् येक ऐसे
फाटक में खतरे का भसग्न ल लगाया जाएगा, और जब प्राकृभतक प्रकाश पयाषप्त न हो तब चेतािनी देने िाली
लैम्प ें िी लगाई जाएँगी।
(2) अगर कोई भबडल्िंग ककसी ढुलाई िाली सड़क, ट्रामलाइन, रेल लाइन या हॉल रोि से 15 मीटर के दायरे
में ह,ै तो ऐसी भबडल्िंग और ढुलाई िाली सड़क, ट्रामलाइन, रेल लाइन या हॉल रोि के बीच एक मज़बतू बाड़
लगाई जाएगी और उसे बनाए रखा जाएगा।
अध्य ाय IX
खनन का काय ष
102. सरु िा प्रबधं योजना.– (1) प्रत् येक खान का माभलक, अभिकताष और प्रबंधक :-
(क) खदान में काम करन े िाले लोगों के स्िास््य और सरु िा के भलए खतरों की पहचान करेंगे, भजनसे उन्ह ें काम
के दौरान खतरा हो सकता ह;ै
(ख) स्ि ास्् य और सुरिा से जुड़े िैसे जोभखमों का मूल् यांकन करेंगे भजससे कायष के दौरान कमषचारी प्रिाभित हो
सकते ह;ैं
(ग) खतरों की पहचान और जोभखमों का मूल्यांकन के भलए उभचत प्रकक्रया का पालन करेंगे।
(घ) पहचान ककए गए महत्िपूर्ष जोभखमों और मूल्य ांककत खतरों को ररकॉिष करेंगे।94 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ि.) ऐसे ररकॉिों को कमषचाररयों द्वारा भनरीिर् के भलए उपलब् ध कराएँगे।
(2) (क) प्रत्येक खदान के माभलक, अभिकताष और प्रबंधक प्रत्येक पहचाने गए खतरे के भनयंत्रर् उपायों की
पहचान करेंगे, उनकी प्रिािशीलता के आधार पर भनयंत्रर्ों के नीचे कदए गए अिरोही क्रम में प्रािभमकता के
साि पदानुक्रम पर भिचार करते हुए भनम्नभलभखत कायष करेंगे :-
(i) उन्मूलन भनयंत्रर्
(ii) प्रभतस्िापन भनयंत्रर्
(iii) अभियांभत्रकी भनयंत्रर्
(iv) प्रशासभनक भनयंत्रर्
(v) भनजी सरं िात् मक उपस् कर
(ख) प्रत्येक खान के माभलक, अभिकताष और प्रबंधक यह िी सुभनभित करेंगे कक मौजूदा जोभखम भनयंत्रर् उपायों
की प्रिािशीलता की भनरंतर भनगरानी और समीिा की जा रही ह ै और उभचत सधु ारात्मक कायष ककए जा
रह े ह ैं |
(3) पहचाने गए खतरों और जोभखम भिश्लर्े र् के आधार पर प्रत्येक खान के माभलक , अभिकताष और प्रबंधक को
"सुरिा प्रबंधन योजना" नामक एक दस्तािेज तैयार करना होगा, भजसमें खानों में व्यािसाभयक सुरिा, स्िास््य
और सरु भित कायष भस्िभतयों को भिकभसत करने, लागू करने, प्राप्त करने, समीिा करने और बनाए रखने के भलए
संगठनात्मक संरचना, योजना, गभतभिभधयाँ, भजम्मेदाररयाँ, प्रिाएँ, प्रकक्रयाएँ, प्रर्ाभलयाँ और संसाधन शाभमल
होंगे।
(4) सुरिा प्रबंधन योजना म ें भनम्नभलभखत बातें सभम्मभलत की जाएगी :-
(क) संभहता के प्रािधानों के अनुरूप कंपनी का स्ि ास्् य और सुरिा संबंभधत पररिाभर्त नीभत;
(ख) खान या खान नीभत को भिकभसत करने की िमताओं और पूरा करन े का लक्ष्य की योजना
(ग) खनन योजना,
(घ) प्रत्येक पहचान े गए खतरे के भलए जोभखम प्रबंधन योजनाएँ (एचएमपी) भजनमें प्रमुख खतरों के भलए
मुख्य जोभखम प्रबंधन योजनाएँ (पीएचएमपी) शाभमल ह;ैं
(ि.) मानक सचं ालन प्रकक्रयाएं; उन सिी गभतभिभधयों और कायों के भलए मानक पररचालन प्रकक्रयाए ं
(एसओपी) भजनमें व्यभक्तयों के स्िास््य और सुरिा को गिं ीर नकु सान पहुचं ाने की िमता हो;
(च) सुरिा प्रबंधन योजना के प्रदशषन को मापने, भनगरानी करने और मूल्यांकन करने के तरीके और आिश्यक
बदलािों को शाभमल करना।
(छ) बारह महीने के अंतराल पर और / या जब खदान में महत्िपूर्ष पररितषन होते ह ैं तो समय-समय पर
समीिा करने और तदनसु ार सुरिा प्रबंधन योजना को अद्यतन करने की योजना।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 95
(5) प्रत्येक खान के माभलक, अभिकता ष या प्रबंधक माभलक द्वारा उभचत प्रकार स े हस्तािररत सुरिा प्रबंधन
योजना की एक प्रभत िेत्रीय भनरीिक-सह-सुभिधाकताष को प्रस्तुत करेंगे, जो ककसी िी समय भलभखत आदशे
द्वारा योजना में ऐस े संशोधन करन े की मांग कर सकता है, जैसा िह उसमें भनर्दषष्ट करे।
(6) प्रत्येक खान के माभलक, अभिकताष और प्रबंधक सरु िा प्रबंधन योजना के प्रिािी कायाषन्ियन के भलए
उत्तरदायी होंगे।
(7) अगर खानों का एररया 10 हक्े टेयर से कम ह,ै तो मख्ु य भनरीिक सह सभु िधाप्रदाता भलभखत आदेश द्वारा
ऐसी खानों को इस भिभनयमन के प्रािधानों से छूट दे सकते ह ैं और उसमें बताई गई शतें लागू कर सकते ह।ैं
103. हस्त चाभलत (मनै अु ल) खलु ी खनन स्ि ल. – हस्त चाभलत (मैनुअल) खुली खनन स्ि लों में भनम्न भलभखत
पूिाषिधाभनयाँ बरती जाएँगी, अिाषत् :-
(1) जलोढ भमट्टी, मोरम, बजरी, मृभत्तका, मलिा या ऐसी ही अन् य िूभम में :-
(क) ककनारों को सुरभित कोर् का ढलान कदया जाएगा, जो िैभतज रेखा से 45 भििी से अभधक नहीं होगा या
ककसी ऐसे अन् य कोर् का होगा जो िेत्रीय भनरीिक सह सुभिधाकताष भलभखत आदेश द्वारा अनुज्ञात करे, और
िह उन शतों के अधीन होगा जो िह उसमें भिभनर्दषष् ट करें; या
(ख) ककनारे बेंचाकार रखे जाएँगे और ककसी बेंच की ऊँचाई 1.5 मीटर से अभधक नहीं होगी और उसकी
चौड़ाई उसकी ऊँचाई से कम नहीं होगी :
बशते कक िेत्रीय भनरीिक सह सुभिधाकताष, भलभखत आदशे द्वारा और उन शतों के अधीन जो िह उसम ें
भिभनर्दषष् ट करें, ककसी खनन स्ि ल को, भजसके बारे में ऐसी भिशेर् करठनाईयाँ भिद्यमान हों, जो उसकी राय म,ें
इस खंि के उपबंधों का अनपु ालन उभचत रूप स े साध् य न रहने दते ी हों, उन उपबंधों के अनुपालन स े छूट द े
सकेगा।
(2) जहाँ कोई स्त ंि नाप के प्रयोजन के भलए यिाित छोड़ कदया जाता ह ै िहाँ उसकी ऊँचाई 2.5 मीटर स े
अभधक नहीं होगी; और जहा ँ ऐसे स्त ंि की ऊँचाई 1.25 मीटर से अभधक हों िहा ँ उसके आधार पर व् यास 1.5
मीटर से कम नहीं होगा।
(3) जहा ं ढलान िाली सतह पर 'फ्लोट' या इसी तरह के दसू रे भिपॉभजट पर मैन्यअु ल तरीके स े काम ककया
जाता ह,ै िहा ं सतह को बेंच बनाया जाएगा और ककनारों को िैभतज रेखा स े 60 भििी से ज़्यादा के कोर् पर
ढलान दी जाएगी और ककसी िी बेंच की ऊंचाई छह मीटर से ज़्यादा नहीं होगी और उसकी चौड़ाई ऊंचाई स े
कम नहीं होगी:
बशते कक मुख् य भनरीिकसह सुभिधाकता ष भलभखत आदेश द्वारा और उन शतों के अधीन जो िह उसम ें
भिभनर्दषष् ट करे ककसी ऐस े खनन स्ि ल को इस उप-भिभनयम के अनुपालन से छूट दे सकेगा, भजसके बारे में ऐसी
भिशेर् करठनाईयाँ ितषमान हों जो उसकी राय में उसके उपबंधों के अनुपालन को उभचत रूप से साध् य न रहन े
देती हों।
(4) ककसी कठोर और सुसहृं त िूभम के उत् खनन म ें या पूिेिर् की ट्रेंचों और गतों में ककनारे यिोभचत रूप स े
बैंचाकार, ढाल और सरु भित बनाए जाएँगे भजससे पाश् िों के भगरने का खतरा न रह:े
बशते कक बेंच की ऊँचाई छ: मीटर से अभधक नहीं होगी।96 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) कोई िृि, अबि भशलाखंि या मलिा उत् खात के ककनारे या पाश्ि ष से तीन मीटर के अन् दर नहीं रहने कदया
जाएगा।
(6) कोई व् यभक्त ककसी फेस या पाश्ि ष के नीचे स े भमट्टी न काटेगा, न कटाएगा और न ऐसा काटना अनुज्ञात
करेगा भजससे कोई प्रलंबन (ओिर हडैं गंग ) हो जाए।
104. यत्रं ीकृत खलु ी खनन स्ि ल. – (1) यंत्रीकृत या यन्त्रसाभधत खुली खनन कायष शुरू करन े से पहले :
(i) खान के माभलक और अभिकताष यह सुभनभित करेंगे कक खान, भजसमें उसकी कायष-पिभत, भपट की
अंभतम ढाल, िम् प की ढाल और ढाल के स्ि ाभयत् ि की भनगरानी शाभमल ह,ैं का आयोजन, पररकल् पन और
कायषसाधन खदान के सरु भित प्रचालन को सुरभित रखने के भलए इस प्रकार ककया जाए जैसा ककसी िैज्ञाभनक
अध् ययन द्वारा भनधाषररत ककया गया हो |
(ii) उपयुषक्त िैज्ञाभनक अध्ययन की अनुशंसाओं के आधार पर, माभलक , अभिकताष या प्रबंधक खनन की एक
भिस्तृत योजना तैयार करेगा, भजसमें कायष भिभध, यंत्रीकरर्, भपट और िंप का भिन्यास, बैककफडलंग अगर कोई
हो तो, भपट और िंप की ढलानों की भनगरानी प्रर्ाली, ढुलाई सड़क का भिज़ाइन और अन्य लागू मापदंि
शाभमल होंग,े और योजना के अनुसार कायष शुरू करने से कम से कम साठ कदन पहले योजना की एक प्रभत सभहत
मुख्य भनरीिक-सह-सुभिधाकताष और िेत्रीय भनरीिक-सह-सुभिधाकताष को एक नोरटस जमा करेंग;े और काम
तब तक नहीं ककया जाएगा जब तक मुख्य भनरीिक-सह- सुभिधाकताष भलभखत आदेश में ऐसी शतों के अनुसार
न बताए जाए ं
एिम भजन खानों में खनन की ऐसी योजना तैयार करके प्रस्तुत नहीं की गई है, िहां माभलक और अभिकता ष
की यह भजम्मेदारी होगी कक िे उक्त योजना तैयार करिाएं और इन भिभनयमों के लागू होने की तारीख से एक
साल के अंदर मुख्य भनरीिक-सह-सुभिधाकताष और िेत्रीय भनरीिक-सह-सुभिधाकता ष को प्रस्तुत करें, और काम
तब तक नहीं ककया जाएगा जब तक मुख्य भनरीिक-सह-सुभिधाकताष जो भलभखत आदेश द्वारा बताई गई शतों के
अनुसार न हो:
(iii) 10 हक्े टेयर से छोटे खानों के मामले में िैसा स्कीम भबना िैज्ञाभनक अध्ययन के बनाया और जमा ककया जा
सकता ह।ै
(iv) प्रत्येक मशीनीकृत खुली खदान के माभलक, अभिकताष और प्रबंधक यह सुभनभित करेंगे कक उप-भिभनयम
(1) के खंि (i) में भनर्दषष्ट िैज्ञाभनक अध्ययन की ररपोटष में की गई अनुशंसाओं का अनुपालन हो और खदान म ें
कायष एिं संचालन में उप-भिभनयम (1) के खंि (ii) में भनर्दषष्ट खनन योजना या संशोभधत योजना का सख्ती स े
पालन करें, जैसा िी मामला हो।
(2) उप-भिभनयम (1) के खंि (i) में भनर्दषष्ट िैज्ञाभनक अध्ययन और उप-भिभनयम (1) के खंि (ii) में भनर्दषष्ट खनन
योजना की समय-समय पर समीिा की जाएगी और जब िी कायष पिभत, मशीनीकरर्, िू-खनन भस्िभत में कोई
बड़ा पररितषन हो या खदान में ककसी नए खतरे की पहचान हो।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 97
(3) जलोढ भमट्टी, मोरम, बजरी, मृभत्तका, मलिा या ऐसे अन् य िूभम से बने ओिरबिेन में बेंचों की ऊँचाई 3
मीटर से अभधक नहीं होगी तिा उसकी चौड़ाई उसकी ऊँचाई से तीन गुर्े से कम नहीं होगी।
(4) उप-भिभनयम (3) में अभल्लभखत त् यों से भिन् न चट्टानी संरचना िाले ओिरबिेन में बेंचों की ऊँचाई
खुदाई, उत् खनन या हटाने के भलए प्रयुक् त उत् खनन मशीन की खुदाई की ऊँचाई या पहुचँ से अभधक नहीं होगी
तिा उसकी चौड़ाई भनम् नभलभखत से कम नहीं होगी :-
(क) बेंच पर चलनेिाल े सबसे चौड़ी मशीन की चौड़ाई से दो मीटर अभधक, या
(ख) यकद बेंच पर िम् पर चलते ह,ैं तो िम् पर की चौड़ाई से भतगुर्ा, या
(ग) बेंच की ऊँचाई,इनमें स े जो अभधक हो।
(5) िूभमगत भिकभसत स्त ंिों को ओपनकास्ट भिभध द्वारा भनकालने का कोई िी कायष मख्ु य भनरीिक-सह-
सभु िधाकता ष की पूिष भलभखत अनुज्ञा से ही और उन शतों के अनुसार ही जो िह उसमें भिभनर्दषष् ट करे, प्रारंि,
संचाभलत और भनष्प ाकदत ककया जाएगा, अन् यिा नहीं।
(6) इस भिभनयम में ककसी बात के होते हुए िी मुख् य भनरीिक सह सुभिधाकताष, भलभखत आदेश द्वारा और
ऐसी शतों के अधीन रहत े हुए जो िह उसमें भिभनर्दषष् ट करें, पूिोक् त स े भिन् न बचें ों की ऊँचाई और चौड़ाई
अपेभित या अनुमभत दे सकता ह।ै
105. खलु ी खदानों की िराई – (1) खुली खदानों द्वारा की गई सिी खुदाई को उपयुक्त रूप से िरा जाएगा
या उपयुक्त साधनों द्वारा सरु भित रखा जाएगा जैसा कक भिभनयम 104 के उप-भिभनयम (1) म ें भनर्दषष्ट खनन
योजना में भिभनर्दषष्ट ह।ै
(2) माभलक, अभिकता ष या प्रबंधक मुख्य भनरीिक-सह-सुभिधाकता ष को िापस िरने की एक योजना प्रस्ततु
करेगा, भजसमें भिभनयमन 104 के अनुसार भनकासी के साि-साि िापस िरना, पररत्याग के समय खदान का
आंभशक िापस िरना, यकद ऐसा प्रस्ताभित हो और मुख्य भनरीिक-सह-सुभिधाकताष भलभखत आदेश द्वारा
योजना को मंजरू ी दे सकता ह ै या ऐसे संशोधनों की आिश्यकता हो सकती ह ै जैसा कक इसमें भनर्दषष्ट ककया जा
सकता ह।ै
106. स्प ॉयल बकैं और िम्प .– (1) ओिरबिेन हटाने के दौरान ऊपरी भमट्टी को एक अलग स्ि ान पर इकट्ठा
ककया जाएगा ताकक उिार ककए गए िेत्र को ढकने में उसका प्रयोग ककया जा सके।
(2) स्प ॉयल बैंक के ढलान का भनधाषरर् जमा ककए गए सामिी के प्राकृभतक ठहराि कोर् (एंगल ऑफ ररपोज)
से ककया जाएगा, बशते कक ककसी िी दशा में, यह िैभतज से 37.5 भििी से अभधक नहीं होगा:
बशते कक, जहाँ ककसी खान में ककसी िैज्ञाभनक एजसें ी या संस्ि ान, भजसे ढलान भस्िरीकरर् म ें
भिशेर्ज्ञता हाभसल हों, के द्वारा ककए गए िैज्ञाभनक अध्य यन द्वारा स्प ॉयल बैंक के उपरोक्त से अभधक ढलान98 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
बनाने का सुझाि कदया गया हो तो मुख्य भनरीिक सह सभु िधाकताष भलभखत आदेश द्वारा एिं उसमें भिभनर्दषष् ट
शतों के अधीन स् पॉयल बैंक के भलए ऐसे अभधक ढलान कोर् का अनुमभत दे सकता ह।ै
(3) अबि ओिरबिेन तिा खुली खनन स्ि लों से ऐसे अन् य सामिी या िासरी से भनकलने िाले अन् य
पररत् यक् त पदािष या अन् य स्रोतों से भनकलने िाल े पदािष को इस प्रकार स े िम् प ककया जाएगा कक िम् प की गई
सामिी के भखसकने की संिािना न रह।े
(4) कोई स्प ॉयल बैंक, भजसकी ऊँचाई 30 मीटर से अभधक हो, को इस प्रकार बेंच बनाकर रखा जाएगा कक
कोई िी बेंच 30 मीटर से अभधक ऊँची न हो, और कुल ढाल उसके 1 ऊध् िाषधर में 1.5 िैभतज से अभधक नहीं
होगा।
(5) खुली खदानों में अपभशष्ट-ढेर या िंप की योजना, भिजाइन और रखरखाि, भिभनयम (104)के उप-
भिभनयम (1) में उभल्लभखत िैज्ञाभनक अध्ययन की भसफाररशों और खनन योजना के अनुसार ककया जाएगा:
परन्तु बाहरी स्प ॉयल बैंक या िंप का भनचला िाग (स्प ॉयल बैंक या िंप का टो) खदान की खुदाई,
रेलिे या अन्य सािषजभनक कायों, सािषजभनक सड़क या ििन या माभलक के स्िाभमत्ि ना होन े िाले अन्य स्िायी
ढांचे से, स्प ॉयल बैंक या िंप की ऊंचाई के िेढ गुना या 50 मीटर, जो िी अभधक हो, की दरू ी के अंदर ककसी िी
डबंद ुके भनकट नहीं बढाया जाएगा;
परन्तु यह िी कक, मुख्य भनरीिक-सह-सुभिधाकता ष भलभखत आदेश द्वारा और उसमें भिभनर्दषष्ट शतों के
अधीन रहत े हुए, उपरोक्त प्रािधानों स े भिन्न तरीके स े िंप या स्प ॉयल बैंक के भनचल े भहस्से को, भिस्ताररत करन े
की आिश्यकता या अनुज्ञा दे सकता ह।ै
(6) खुली खदान में स्प ॉयल बैंक या िंप के ररहिैं डलंग के मामले में, माभलक , अभिकताष या प्रबंधक काय ष प्रारंि
करने से कम से कम 60 कदन पहले स्प ॉयल िंिार या िंप के ररहिैं डलंग की भिस्तृत योजना मुख्य भनरीिक-सह-
सुभिधाकताष और िेत्रीय भनरीिक-सह-सुभिधाकता ष को प्रस्तुत करेगा; और काय ष केिल मुख्य भनरीिक-सह-
सुभिधाकताष द्वारा भलभखत आदेश द्वारा एिं उसमें भिभनर्दषष्ट शतों के अनुसार ही प्रारंि या संचाभलत ककया
जाएगा।
(7) ककसी रेलिे या सािजष भनक भनमाषर् कायष या सड़क या ििन या संरचना जो माभलक का न हो और सकक्रय
स्पॉइल बैंक के तल के बीच उपयुक्त बाड़ लगाई जाएगी ताकक अनभधकृत व्यभक्तयों को स्पॉइल बैंक के पास आने
से रोका जा सके।
(8) ककसी िी व्यभक्त को सकक्रय अपभशष्ट ढेर के तली के पास जाने की अनुमभत नहीं दी जाएगी, जहाँ से सामिी
कफसलने या लुढकने स े उसे खतरा हो सकता ह।ै
(9) अपभशष्ट ढेरों या िंपों की ढलानों के ढहने स े रोकने के भलए पयाषप्त सािधाभनयां बरती जाएंगी।
107. पररिहन के भनयम.– (1) प्रत् येक खान का प्रबंधक व् यिहार में लाए जा रह े पररिहन मशीनरी के
आकार और िमता एिं मौजूद स्ि ानीय दशाओं को ध् यान में रखते हुए पररिहन भनयम संभहता बनाएगा और
उसे लागू करेगा तिा इसकी एक प्रभत िेत्रीय भनरीिकसह सुभिधाकताष को भनिेकदत ककया जाएगा, जो ककसी
िी समय भलभखत आदेश द्वारा ऐसे भनयमों में ककसी ऐसे बदलाि की अपेिा कर सकेगा जो िह उसमें भिकदर्दषष्ट
करे।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 99
(2) प्रबंधक सिी संबंभधत प्रचालकों, चालकों तिा पदधाररयों को पररिहन भनयम की प्रभतयाँ सौंपेगा और
ऐसी प्रभतयों को खान में सिी सहज दश्ृ य स्ि ानों पर िी कामगारों द्वारा समझी जानेिाली िार्ाओं में
लगाएगा।
(3) प्रबंधक तिा िैसे पदधाररयों में से प्रत् येक पररिहन भनयमों के उपबंधों के प्रिािी अनुपालन के भलए
भजम् मेिार होंग,े और कोई िी खान या उसके कोई िाग में उसके उल् लंघन में काम नहीं ककया जाएगा।
108. व्य िहार सभं हता.– (1) प्रत् येक खान का प्रबंधक ककसी मशीनरी या अपने खान से संबंभधत ककसी नई
संकक्रया को सभन्नभिष् ट करन े से पूिष यिाभस्िभत प्रत् येक ऐसे मशीनरी या संकक्रया के भलए ‘’व् यिहार संभहता’’
बनाएगा और खान में लागू करेगा जो सभं हता या इन भिभनयमों के असंगत नहीं होगा।
(2) व् यिहार संभहताएं, मशीनरी या संचालन के प्रकार, आकार और िमता या प्रस्ताभित उपयोग तिा
प्रचभलत स्िानीय पररभस्िभतयों को ध्यान में रखते हुए तयै ार की जाएंगी।
(3) व् यिहार संभहता में अन्य बातों के अलािा भनम्नभलभखत के भलए प्रािधान होगा:
(क) मशीनरी या संचालन के भलए मानक सचं ालन प्रकक्रयाएं भजनसे यह संबंभधत ह;ै
(ख) मशीनरी के उत् िापन, संस्ि ापन, पुनसिंस्ि ापन, रूपान् तरर्, बदलाि, रख-रखाि या मरम् मत के बाद प्रिम
उपयोग से पूिष परीिर् और जाँच;
(ग) मशीन के सुरभित प्रचालन को सुभनभित करने के भलए इसके उपांगों समेत मशीन की परीिर् और जाँच
का कायष-क्रम तिा उनकी प्रकृभत; और
(घ) जाँच की अभिलेखों को रखने का तरीका।
(4) प्रत् येक खान का माभलक,अभिकताष या प्रबंधक संबंभधत पदधाररयों और व् यभक्तयों को व् यिहार संभहता की
प्रभतयाँ सौंपेगा तिा उसका प्रिािी अनुपालन सुभनभित करेगा।
(5) उप-भिभनयम (3) के अधीन भिरभचत व् यिहार संभहता की एक प्रभत सदैि खान के कायाषलय में और ऐस े
संकक्रया या मशीनरी के सबं ंभधत स् िानों पर िी रखी जाएगी।
109. िभू मगत काय:ष - िभू मगत कायष की प्रर्ाली द्वारा संचाभलत प्रत्येक खदान में, भनम्नभलभखत प्रािधान
प्रिािी होंग,े अिाषत् -
(1) जब तक मुख्य भनरीिक-सह-सुभिधाकताष द्वारा भलभखत आदेश द्वारा अन्यिा अनुमभत नहीं दी जाती ह ै और
ऐसी शतष के अधीन जो उसमें भनर्दषष्ट की जा सकती है, प्रत्येक मुख्य िाइि की ऊंचाई 1.8 मीटर स े कम नहीं
होगी और 3.0 मीटर से अभधक नहीं होगी और उसकी चौड़ाई 4.8 मीटर स े अभधक नहीं होगी।
(2) अपभशष्ट, भशरा, िार, चट्टान या खभनज तल या भनिेप में भनर्मषत सड़कों, स्तंिों या ब्लॉकों के आयाम
और भनष्कर्षर् के अनक्रु म िज्ञै ाभनक अध्ययन पर आधाररत होंगे ताकक भिकास और रोक के चरर्ों के दौरान और
ऐसे चरर्ों के बीच काम की भस्िरता सुभनभित हो सकेः100 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
बशते कक यकद मुख्य भनरीिक-सह-सुभिधाकताष की राय ह ै कक उपरोक्त आयाम ऐसे ह ैं जो कामकाज के ककसी िी
भहस्से के समय से पहल े पतन को प्रस्तुत करते हैं, तो एक आदेश द्वारा आयामों और सुरिात्मक उपायों के ऐस े
संशोधनों की आिश्यकता हो सकती ह।ै ककसी िी कायष के संबंध में, जैसा कक भनर्दषष्ट ककया जा सकता ह।ै
(3) मुख्य भनरीिक-सह-सुभिधाकताष की पूिष भलभखत अनुमभत के भबना और उसमें भनर्दषष्ट की गई शतों के
अनुसार ही खभनजों के स्तिं ों या ब्लॉकों का भनष्कर्षर् या भििाजन या कमी शुरू, संचाभलत या की जानी
चाभहए।
(4) उप-भिभनयम (3) में भनर्दषष्ट ऐसी अनुमभत के भलए एक आिेदन के साि उस िेत्र की एक अप-टू-िेट योजना
होगी जहा ं खभनजों के स्तंिों या ब्लॉकों को भनकालने या कम करने का प्रस्ताि है, भजसमें भनष्कर्षर् या कमी की
प्रस्ताभित सीमा को कदखाया गया ह।ै भजस तरह से इस तरह के भनष्कर्षर् या कमी को पूरा करने का प्रस्ताि है,
खभनज जमा की मोटाई और अन्य भिशेर्ताएं, सामान्य िुबकी की दर और कदशा और नस की भपच, हगैं िॉल
और फूटिॉल की प्रकृभत, रुकने की चौड़ाई, कामकाज की गहराई, िैज्ञाभनक अध्ययन ररपोटष और ऐस े अन्य
भििरर् भजनकी मुख्य भनरीिक-सह-सुभिधाकताष को आिश्यकता हो सकती ह।ै
(5) खभनजों के खंिों या ब्लॉकों के भनष्कर्षर्, भििाजन और कमी के संचालन को इस तरह से शुरू, संचाभलत
या ककया जाना चाभहए कक, जहां तक संिि हो, भनष्कर्र्ष नहीं ककए गए खभनजों के खंिों या ब्लॉकों पर बंद-
आउट िेत्र में पतन का भिस्तार रोका जा सके।
110 बचत. - (1) भिभनयम 109 में कुछ िी खभनज भबस्तर या जमा के ककसी िी स्तिं या ब्लॉक के भििाजन
या कमी को नहीं रोकेगा, जहां प्रबंधक की राय में, ऐसा काम ढुलाई, िेंरटलेशन, िेनेज या ककसी अन्य उद्देश्य के
भलए आिश्यक ह।ै खान के उभचत कामकाज के भलए, यकद इस तरह के काम को शुरू करने के इरादे की भलभखत
रूप में चौदह कदन की पूिष सचू ना िेत्रीय भनरीिक-सह-सभु िधाकताष को दी गई ह।ै
(2) उप-भिभनयम (1) के तहत प्रत्येक नोरटस के साि एक ऑफसेट योजना होगी, भजसमें संचालन का भििरर्
कदखाया जाएगाः
(3) यकद िेत्रीय भनरीिक-सह-सुभिधाकता ष की राय में उप-भिभनयम (1) के तहत इस तरह के काम स े कामकाज
की भस्िरता खतरे में पड़न े की संिािना है, तो िह एक आदेश द्वारा, ऐसे अभियान शुरू करने से पहल े पूरा
करने की आिश्यकता हो सकती ह।ै या ऐसे सरु िात्मक कायों का भिस्तार, जो उसमें भनर्दषष्ट ककए जा सकते ह।ैं
111. सड़कें और कायस्ष ि ल.ें – (1) सिी कायष-स्ि लों तिा, िायुमागों और दसू रे भनकास को जानेिाले सड़क
मागों सभहत, सब यात्रा रास्तोंकी छतें और पाश् िष सुरभित रूप से बनाए और बने रख े जाएँगे।
(2) खनन स्ि लों के समय से पूिष ढह जाने को रोकने के भलए आिश् यक व् यिस् िा की जाएगी, और ककसी ऐस े
ढह जाने की दशा में उसे शेर् िाग से अलग करने, भनयंभत्रत करने या ठीक करने की पयाषप्त व् यिस् िा की
जाएगी।
(3) जब िी स्त ंिों के भिध्ि ंस या स् तंिों के भनकाले जाने के फलस्ि रूप सामान् य रूप से ढह जाने से भिन् न ककसी
प्रकार से भनकट िभिष् य में ढह जाने के लिर् का पता चले तो प्रबंधक तत् काल िेत्रीय भनरीिक सह सभु िधाकता ष
को सूभचत करेगा।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 101
112. भनरीिकों सह सभु िधाकताओंष की शभक्तया.ँ – (1) यकद िेत्रीय भनरीिक सह सभु िधाकता ष को यह प्रतीत हो
कक ककसी खान या उसके ककसी िाग में, भिभनयम 97, 98, 103, 104, और 107 के या उनमें स े ककसी
भिभनयम के अधीन ककए गए ककसी आदेश के उपबंधों का अनुपालन नहीं हुआ ह ै तो िह माभलक, अभिकताष या
प्रबंधक को नोरटस द े सकता ह ै , भजसमें उनसे नोरटस में बताए गए समय के अंदर ऐसे बचाि के उपाय करने के
भलए कहा जाएगा।
(2) उप-भिभनयम (1) के अधीन कदए गए सूचना की अपेिाओं का अनुपालन न ककए जाने की दशा में िेत्रीय
भनरीिक सह सभु िधाकता,ष भलभखत आदेश द्वारा, खान के ऐसे िाग या िागों से, भजनमें संरिात् मक उपायों का
ककया जाना अपेभित ह,ै कोयले का भनकाला जाना तब तक के भलए प्रभतभर्ि कर सकेगा जब तक सूचना म ें
भिभनर्दषष् ट अपेिाओं का अनुपालन नहीं हो जाता।
113. भनरीिर् के समय पाए जानिे ाल े उल्ल ंघनों की ओर ध्य ान आकर्र्तष करना.– (1) यकद मुख् य भनरीिक
सह सभु िधाकता ष या कोई भनरीिक सह सभु िधाकता ष ककसी खान का भनरीिर् करते समय अभधभनयम या उसके
अधीन बनाए गए भिभनयमों, भनयमों या उपभिभधयों या ककए गए आदेशों के उपबंधों का कोई उल् लंघन पाता ह ै
या उस े इसके बारे में पता चलता ह,ै तो िह ऐसे उल् लंघनों को इस उद्देश् य के भलए मुख् य भनरीिक सह
सभु िधाकता ष द्वारा भिभनर्दषष् ट प्रपत्र िाले सभजल् द अन् त: प्रभत्रत खाते (स्पॉट भनररिर् रभजस्टर) में या पनु ः प्राप्त
करन े योग्य और सपं ादन योग्य न होन े िाल े इलक्े ट्रॉभनक रूप म ें दजष करेगा,और यकद माभलक, अभिकताष या
प्रबंधक स्ि ल पर उपभस्ित ह ै ,तो उन् ह ें िी इसकी सूचना देगा।
(2) मुख् य भनरीिक सह सभु िधाकता ष या भनरीिक सह सभु िधाकता ष उप-भिभनयम (1) के अधीन भनर्दषष् ट
रभजस्ट र में उल् लंघन दज ष करते समय ऐसी प्रभिभष्टयों पर सम् यक रूप स े तारीख सभहत अपना हस्त ािर करेगा
तिा अपने अभिलेख की एक कॉपी लेगा:
बशते कक, मुख् य भनरीिक सह सभु िधाकता ष या भनरीिक सह सभु िधाकता ष ऐसे उल् लंघन की प्रभिभष्ट नहीं
करेगा भजसे सिेिर् या परित्त ी जाचँ के पश् चात ् सुभनभित ककया जाना है, और यकद इसकी पुभष्ट हो जाती ह ै
तो िह तत् पश् चात ् उस उल् लघं न को और ऐस े अन् य उल् लघं न को िी जो उक्त रभजस्ट र में प्रभिष् ट करन े से छूट गए
हों, को भिभनर्दषष् ट करत े हुए माभलक, अभिकताष या प्रबंधक को सूभचत कर सकता ह:ै
बशते कक यह और कक, रभजस्ट र में की गई कोई प्रभिभष्ट या उसमें प्रभिभष्ट नहीं ककए जाने का िी प्रिम
बशते ककक के अनसु रर् में संसूचना देना या न देना ककसी व् यभक्त के संभहता या उसके अधीन बनाए गए
भिभनयमों, भनयमों, उप-भिभधयों या आदेशों द्वारा कदए गए कतषव् य और दाभयत् िों को ककसी प्रकार से सीभमत
नहीं करेगा।
(3) जब रभजस्ट र में कोई प्रभिभष्ट की जाती ह ै तो –
(क) यह माना जाएगा कक माभल ,अभिकताष और प्रबंधक प्रत्य ेक को उसकी जानकारी है, और
(ख) उसकी एक प्रभत ऐसी प्रभिभष्ट की जाने की तारीख के एक कदन के िीतर 15 से अन् यून कदनों के भलए खान
सूचना बोिष पर तत्काल लगाई जाएगी।
(4) माभलक , अभिकताष या प्रबंधक प्रभिभष्ट की तारीख से 15 कदन से अनभधक अिभध के िीतर मुख् य भनरीिक
सह सभु िधाकता ष या भनरीिक सह सभु िधाकता ष को एक प्रभत िापस करेंगे और उस पर यह रटप् पर्ी सभहत प्रभिभष्ट
करते हुए उल् लंघन को ठीक करने के भलए की गई कारषिाई और उसकी तारीख को दशाषएगा।102 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) य ह रभजस्ट र खान कायाषलय में उसमें अंभतम प्रभिभष्ट करन े की तारीख के पश् चात् कम स े कम तीन िर् ष की
अिभध के भलए भनरीिर् के भलए उपलब् ध रहगे ा I
114 रेल, सड़क आकद के नीच े की खनन स्ि ल.– (1) मुख्य भनरीिक सह सभु िधाकता ष की भलभखत पूिष अनुज्ञा स े
ही और उन शतों के अधीन ही जो िह उसमें भिभनर्दषष् ट करे, ककसी रेल, या ककसी लोक सकं मष, भजसके बारे म ें
यह भिभनयम केन् द्रीय सरकार के ककसी साधारर् या भिशेर् आदेश के कारर् लागू ह ैं या ककसी लोक सड़क या
ििन या ककसी अन् य स्ि ायी भनर्मषती के, जो खान के माभलक की नही हो 45 मीटर के अन् दर के ककसी स्ि ान पर
न कोई खनन स्ि ल ें बनाई जाएँगी या स्त ंिों के भनकालने या छाँटन े का कोई काम ककया जाएगा या उनका
उतना भिस्त ार ककया जाएगा।
(2) उप-भिभनयम (1) के अधीन अनुज्ञा के भलए प्रत् येक आिेदन भनम्न भलभखत भिभनर्दषष्ट करेगा – संबंभधत रेल
या लोक-सड़क या संकमष या ििन या भनर्मषती के संबंध में खान की खनन स्ि लों की भस्िभत, आशभयत
संकक्रयाओं को करने को प्रस्ि ाभपत भिभध और िे सीमाएँ भजन तक उक्त संकक्रयाओं का ककया जाना प्रस्ि ाभपत
ककया गया ह,ै और उसके साि एक नक् शे की दो प्रभतयाँ, ितषमान और आशभयत सकं क्रयाओं को जहाँ तक ि े
संबंभधत रेल या लोक-सड़क या संकमष या भनर्मषती पर प्रिाि िालती हों, दर्शषत करत े हुए संलग्न की जाएगी।
(3) उप-भिभनयम (2) में भनर्दषष्ट प्रत् येक आिेदन की एक प्रभत, रेल की दशा में, संबंभधत रेल प्रशासन को िजे ी
जाएगी और ककन् हीं यिापूिोक् त लोक सकं मों की दशा में ऐसे प्राभधकारी के पास िेजी जाएगी भजसका केन् द्रीय
सरकार साधारर् या भिशेर् आदेश द्वारा भनदेश दे।
(4) भिभनयमों में ककसी बात के होते हुए िी ऐसी रेल सड़क, संकमष, ििन या भनर्मषती की भस्िरता तब तक
खतरे में नहीं िाली जाएगी जब तक, यिाभस्िभत, उसे भगरा न कदया गया हो या मोड़ न कदया गया हो या खाली
न कर कदया गया हो।
(5) जहाँ ऐसी रेल, सड़क, संकमष, ििन या भनर्मतष ी की भस्िरता पर ककन् हीं खनन सकं क्रयाओं के कारर् खतरा
उत् पन् न हो गया हो, िहाँ मुख् य भनरीिक सह सभु िधाकता ष भलभखत आदेश द्वारा माभलक से खान में िूभम के नीच े
या सतह पर ऐसे सरं िात् मक संकमों को और ऐसे समय के अन् दर, जो िह आदेश में भिभनर्दषष् ट करे, बनाने की
अपेिा कर सकेगा।
115॰ खान के बदं ककए जान े के पिू ष सरं िात्म क सकं म.ष – (1) मुख्य भनरीिक-सह-सभु िधाकताष, भलभखत आदेश
द्वारा, ककसी खान के माभलक को, भजस पर भिभनयम 29 का उप-भिभनयम (4) लाग ू होता ह,ै खान में िभू मगत
या सतह पर ऐस े सरु िात्मक काय ष बनान े के भलए, ऐस े समय के िीतर, जसै ा िह उसमें भनर्दषष्ट करे, बाध्य कर
सकता ह।ै
(2) मुख्य भनरीिक-सह-सुभिधाकताष, भलभखत आदेश द्वारा, उप-भिभनयम 1 के अतं गषत आन े िाली ककसी िी
खान के माभलक को खान में िूभमगत या सतह पर ऐसे सरु िात्मक कायों का भनमाषर् करने के भलए ऐस े समय के
िीतर, जैसा िह उसमें भनर्दषष्ट करे, बाध्य कर सकता ह।ै
(3) यकद माभलक उप-भिभनयम (1) में भनर्दषष् ट आदेश में भिभनर्दषष् ट समय के अन् दर ऐसे संरिात् मक संकमष न
बनाए तो मुख् य भनरीिक सह सभु िधाकता ष उन संकमों को ककसी अन् य अभिकरर् द्वारा बनिा सकेगा और[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 103
उसका मुख् य भनरीिक सह सभु िधाकताष द्वारा प्रमाभर्त व् यय खान के माभलक द्वारा चुकाया जाएगा और िू-
राजस्ि की बकाया की िांभत उससे िसूल ककया जा सकेगा।
(4) जब तक सरु िात्मक कायों का भनमाषर् नहीं ककया जाता है, तब तक मुख्य भनरीिक-सह-सुभिधाकताष द्वारा
भनधाषररत आिश्यकताओं के अनुसार, खान म ें कम स े कम दो प्रिेश द्वारों पर प्रिेश करने के साधनों को बरकरार
रखा जाएगा और काम करने के क्रम में रखा जाएगा।
116. खान के सीमाओं के समीप की खनन .– (1) प्रत्येक खदान के माभलक, अभिकताष या प्रबंधक के पास एक
ऊध्िाषधर समतल में भनभित खदान सीमा होगी और उप-भिभनयम (2) में भनभहत ककसी िी बात के बािजूद,
इन्ह ें मुख्य भनरीिक-सह-सुभिधाकताष की पूिष भलभखत अनुमभत के भबना और ऐसी शतों के अधीन नहीं बदला
जाएगा जो उसमें भनर्दषष्ट की जा सकती ह:ैं
बशते कक यकद ककसी ओपनकास्ट खदान में दो या दो से अभधक अलग-अलग खुदाई होती ह ै और यकद, मुख्य
भनरीिक-सह-सुभिधाकताष की राय में, िे एक प्रबंधक द्वारा दैभनक व्यभक्तगत पयषिेिर् की अनुमभत देने के भलए
एक-दसू रे के पयाषप्त करीब नहीं ह,ैं तो मुख्य भनरीिक-सह-सुभिधाकताष, एक आदेश द्वारा, खदान को दो या दो स े
अभधक अलग-अलग खदानों में भििाभजत करने की अनुमभत दे सकता ह।ै
बशते यह िी कक ककसी खदान की सीमा में पररितषन की भस्िभत में, उक्त पररितषन के सात कदनों के िीतर नई
सीमा को दशाषने िाली योजना प्रस्तुत की जाएगी।
(2) ककसी खान की सीमा के 7.5 मीटर की दरू ी के िीतर कोई काम नहीं ककया जाएगा, और भििाकदत सीमा के
मामले में, माभलक द्वारा दािा की गई सीमा के 7.5 मीटर की दरू ी के िीतर कोई काम नहीं ककया जाएगा।
भनकटिती खदान जब तक कक सही सीमा के बारे में बाध्यकारी समझौता नहीं हो जाता ह ै या प्रश्न अंततः
न्यायालय द्वारा भनधाषररत ककया गया ह:ै
बशते कक, जहां ककसी िी कारर् से ककसी खदान के कायष को यहा ं ऊपर भनधाषररत दरू ी से कम दरू ी के िीतर
भिस्ताररत ककया जाता ह ै या भिस्ताररत ककया जाता है, िहां मुख्य भनरीिक-सह-सभु िधाकताष, आदेश द्वारा,
माभलक को आदेश में भनर्दषष्ट समय के िीतर ऐसे सुरिात्मक कायष का भनमाषर् करने की अनुमभत दे सकता ह।ै
(3) उप-भिभनयम (2) में ककसी बात के होते हुए िी, मुख्य भनरीिक-सह-सुभिधाकताष, भलभखत आदेश द्वारा और
ऐसी शतों के अधीन रहत े हुए, जो उसमें भनर्दषष्ट की जा सकती हैं, ककसी खान या उसके भहस्से के कामकाज को
बढाने या प्रभतबंभधत करने की अनुमभतभिभनयम के प्रािधानों के साि दे सकता ह ै ।
117. स्ट्र ाटा कंट्रोल एि ं मोभनटटरंग प्ल ान.– (1) (क) प्रत् येक खान के माभलक, अभिकताष और प्रबंधक, िू-
तकनीकी आँकड़े, सूचना एिं कोयले को भिकभसत और भनष्क र्र्षत करने या उसमें से अपेभित उत् खनन करने की
पिभत को ध् यान में रखते हुए ककए गए िैज्ञाभनक अध् ययन के आधार पर एक स्ट्र ाटा कंट्रोल एिं मॉभनटटरंग प् लान
(एस.सी.ए.एम.पी.) तैयार, प्रभतपाकदत और कायाषभन्ित करेंगे, भजसमें िूभमगत कायष-स्ि लों की छत ें और पाश्ि ों
को सुरभित करन े हते ु एक सपोटष प्ल ान िी शाभमल ह,ै और भजसमें िूभमगत खनन स्ि लों की भस्िभत में पररितनष
के साि उभचत संशोधन ककया जाएगा।104 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) माभलक, अभिकता ष और प्रबंधक स्ट्र ाटा कंट्रोल एि ं मॉभनटटरंग प्ल ान (एस.सी.ए.एम.पी.) की एक प्रभत
िेत्रीय भनरीिक सह सभु िधाकता ष को भनिेकदत करेंगे, जो ककसी िी समय एक भलभखत आदेश द्वारा ऐसा
संशोधन अपेभित कर सकेगा, जैसा कक िह उसमें भिभनर्दष्ष ट करे।
(2) िूभमगत खनन स्ि लों िाली प्रत् येक खान का माभलक, अभिकताष या प्रबंधक ककसी संकक्रया को प्रारंि करन े
से पूिष, उप-भिभनयम (1) के अधीन बनाए गए स्ट्र ाटा कंट्रोल एिं मॉभनटटरंग प्ल ान के सामंजस्य में तिा स्ट्र ाटा
का इंजीभनयटरंग िगीकरर्, स्ि ानीय िू-िैज्ञाभनक दशा, कायष-प्रर्ाली, यंत्रीकरर् तिा पूिष अनुिि को ध् यान म ें
रखते हुए, प्रत् येक कायष-स्ि ल के संबंध में सपोटष के प्रकार एिं भिभनदेशों और उनके अन् तराल को दशाषते हुए,
सपोटष प् लान तैयार करेगा तिा उसे लागू करेगा:
(3) ककसी संकक्रया को प्रारंि करने से कम से कम तीस कदन पूिष प्रबंधक, उप-भिभनयम (2) के अधीन तैयार
ककए गए सपोटष प्ल ान की एक प्रभत िेत्रीय भनरीिक सह सभु िधाकताष को भनिेकदत करेगा, जो ककसी िी समय
भलभखत आदेश द्वारा उस नक्श े में ऐसा संशोधन अपेभित कर सकेगा जो िह उसमें भिभनर्दषष् ट करे।
(4) प्रबंधक, उप-भिभनयम (1) एिं (2) के अधीन तैयार ककए गए सपोटष प् लान की प्रभतयाँ अंिेजी के साि-साि
खान में भनयोभजत अभधकतर व् यभक्तयों द्वारा समझी जानेिाली स्ि ानीय िार्ा में भनदेशी रेखाभचत्रों के साि
सिी संबंभधत पयषिेिी पदधाररयों, भजसमें सहायक प्रबंधक शाभमल है, को सौंपेगा, तिा ऐसी प्रभतयों को खान
में सिी सहजदश्ृ य जगहों पर िी भचपकाएगा।
(5) प्रबंधक और ऐस े पयषिेिी पदधारी, उप-भिभनयम (1) और (2) के अधीन बनाए गए सपोटष नक् शे के
उपबंधों के प्रिािी अनुपालन को सुभनभित करने के भलए उत् तरदायी होंग े और कोई िी खान या उसका कोई
िाग इसके उल् लंघन में नहीं चलाया जाएगा।
(6) सपोटष प्ल ान के अन् तगषत अन् य बातों के साि-साि सपोटष भनष्प ादन के मॉभनटटरंग, स्ट्र ाटा बताषि के मापन,
सपोटष को पुन: लगाने, अस्ि ायी सपोटष के उपबंध, पुरान े सपोटष को बदलने, सपोटष की भनकासी तिा भगरी हुई
भमट्टी की सफाई के प्रर्ाली सभम्मभलत होंगे।
(7) सपोटष प्ल ान में कायाषन्ि यन की रर्नीभत की योजना, प्रभशिर् और भनरीिर् तिा पयषिेिर् नीभतया ँ िी
सभम्मभलत होंगी।
(8) माभलक, अभिकताष या प्रबंधक भनम् नभलभखत बातों को भिभनर्दषष् ट करते हुए स्ि ायी आदशे ों की संभहता
प्रभतपाकदत करेगा और उसका कायाषन्ि यन करेगा :-
(क) उपयुक् त सामिी का पयाषप्त मजबूती का और पयाषप्त मात्रा में सपोटष की प्राभप्त और ऐसे जगहों में उसकी
आपूर्तष के भलए प्रर्ाली और संगठन, जहा ँ उपयोग के भलए उपलभ् यता अपेभित हो;
(ख) सपोटष के हन्ै िडलंग की पिभत, भजसमें आिश् यकतानसु ार उसे भियोभजत करना और संयोभजत करना
शाभमल ह,ै और सतह से फेस तक और फेस की जगह से उनके नय े जगह तक पररिहन की पिभत;
(ग) सपोटष के रख-रखाि और जाँच, छत एिं पाश्ि ों के िेडसंग, सपोटष को लगाने, उसकी परीिा करने और
पुन: कसने और हटाए गए सपोटष को पुन: लगाने, भजसमें समुभचत औजारों का प्रयोग शाभमल है, के भलए
प्रर्ाली और संगठन;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 105
(घ) भनयभमत सपोटष मेन या िेसर की कायष से अनुपभस्िभत होने की दशा में उनके स्ि ान पर प्रभतस्ि ाभपत के
रूप में लगाने के भलए सिम व् यभक्तयों की नामसूची; और
(ि.) सिी संबंभधत व् यभक्तयों, जैस े लोिर, िेसर, सपोटषमैन, भिस्फ ोटकताष, सरदार, ओिरमैन और सहायक
प्रबंधक, भजसमें प्रभतस्ि ाभपत के रूप में सपोटषमैन या िेसर को लगाने हते ु नाम सूभचत व् यभक्त िी शाभमल ह,ैं को
सपोटष नक् शे और इस उप-भिभनयम और भिभनयम 122 के अधीन स्ि ायी आदेशों की संभहता और इस संबंध म ें
प्रत् येक के द्वारा भनष्प ाकदत ककए जाने िाले कायष की प्रकृभत से पूरी तरह पररभचत करान े का तरीका।
118. सपोटष लगाना.– (1) (1) सपोटष के रूप में उपयोग की जाने िाली लकड़ी का प्रत्येक टुकड़ा सरु भित रूप
से और एक सरु भित नींि पर सेट ककया जाएगा; और जब िी यह ढीला या टूटता है, तो भजतनी जल्दी हो सके,
कसकर या प्रभतस्िाभपत ककया जाएगा।
(2) समिषन के रूप में उपयोग ककए जाने िाले प्रत्येक कक्रब-सेट या भपगस्टी को एक सुरभित नींि पर अच्छी
तरह से बनाया जाएगा, और बनाया जाएगा और कसकर रखा जाएगा।
(3) केिल आयताकार सामिी के टुकड़ों का उपयोग कक्रब सेट या भपगस्टाई के सदस्यों के रूप म ें ककया जाएगा;
हालाँकक, लकड़ी के मामले म,ें सपाट सतह प्रदान करने के भलए दो भिपरीत ककनारों को जोड़ना पयाषप्त होगा।
(4) समिषन के उद्देश्य स े उपयोग ककए जाने िाल े प्रत्येक पैक के ककनारे सरु भित नींि पर अच्छी तरह से बनाए
जाएंगे और पैक मलबे या अन्य उपयुक्त ज्िलनशील सामिी से िरा होगा, यकद िेत्रीय भनरीिक-सह-
सुभिधाकताष द्वारा आिश्यक हो तो इस े तंग बनाया जाएगा। इसके पूरे िेत्र में व्यिहायष के रूप में।
(5) जहां रेत या अन्य सामिी को सहारा दने े के उद्देश्य से रखा जाता है, उसे कसकर पकै ककया जाना चाभहए।
(6) भसिाय इसके कक जहां समिषन के प्रयोजनों के भलए अब यह आिश्यक नहीं है, ककसी िी ऑपरेशन द्वारा
हटा कदया गया या हटा कदया गया कोई िी समिनष कम स े कम संिि देरी से प्रभतस्िाभपत ककया जाएगा।
(7) प्रत्येक स्िान पर जहां जमीन का पतन हुआ ह ै भजसमें समिषन का भिस्िापन या टूटना शाभमल है, पतन या
उसके ककसी िी भहस्से को साफ करन े का कोई िी काम तब तक नहीं ककया जाएगा जब तक कक नए उजागर
छत या पीछे, लटकती दीिार, फुटिाल या साइि की जांच नहीं की जाती ह ै और यकद आिश्यक हो, तो
अस्िायी समिषन द्वारा सुरभित नहीं ककया जाता ह।ै
(8) उप-भिभनयम (6) में ककसी बात के होत े हुए िी, केिल इतनी न्यूनतम संख्या में व्यभक्त सहायक खनन
पयषिेिक या खनन पयषिेिक की देखरेख में लगे हो सकते ह ैं जो छत और उसके ककनारों को सरु भित करने के
भलए आिश्यक हो सकते ह।ैं
(9) जहां छत बोल्ट का उपयोग समिषन के भलए ककया जाता है, बोल्ट को जगह पर सुरभित रूप से कफक्स
ककया जाना चाभहए।
(10) छत या पीठ, लटकती दीिार, पैर की दीिार और ककनारों के समिनष का परीिर् आिश्यकतानुसार बार-
बार ककया जाएगा; और जब तक यह समिषन के उद्देश्य के भलए आिश्यक नहीं है, ककसी िी ऑपरेशन द्वारा
ढीला, टूटा या हटा कदया गया कोई िी समिषन कम से कम संिि देरी के साि कस कदया जाएगा, बदल कदया
जाएगा या रीसेट ककया जाएगा और भिशेर् रूप से व्यभक्तयों को गुजरने या ककसी रुकािट के बाद काम कफर से
शुरू करन े की अनुमभत देने स े पहले।106 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
119. रूफ ,केनॉपी या कैब की व्य िस्ि ा.– (1) िूभमगत धाभत्िक खानों म ें प्रयुक् त भिद्युत, बैट्री या िीजल-
पाििष, स्ि -चाभलत मशीनरी, भजनमें साइि भिस् चाज ष लोिर, लोि हॉल िंपर, कोल हॉलर और सटल कार िी
शाभमल ह,ैं में मजबूत बनािट िाले ऐसे रूफ केनौपी या कैब लगाए जाएँगे जो छतों या पाश्ि ों के भगरने स े
पयाषप्त संरिर् प्रदान करेगा।
(2) ऐसे मशीन में चालक के भलए बना केभबन या सीट को इगोनोभमक दभृ ष्टकोर् स े भिजाईन ककया जाएगा
और ऐसा होगा कक चालक भबना ककसी बाधा या तनाि के मशीन के सामन े और पीछे की िस् तु-भस्िभत को स्प ष्ट
रूप से देख सके।
120. खड़ े ढाल िाली खनन स्ि ल.ें – (1) ऐसी खनन स्ि लों में, भजनका ढाल िैभतज रेखा से 30 भििी या
अभधक ह,ै काष्ठ या औजारों या अन् य साभधत्रों या सामिी के भगरने या लुढकने से व् यभक्तयों की खतरा रोकने के
भलए उपयुक् त पूिाषिधाभनयाँ बरती जाएँगी।
(2) ककसी ऐसे स्ि ान पर, भजसका ढाल िैभतज रेखा से 45 भििी या अभधक हो, कोई व् यभक्त, जहाँ उसका
कफसल जाना या असंतुभलत हो जाना संिाव् य हो, जब तक िह सुरिा-पेटी या लाइफ लाइन से सरु भित नहीं
कर कदया जाता या अन् यिा रभित नहीं ककया जाता, काम नहीं करेगा और न उसे िहाँ काम करने कदया
जाएगा।
121. बाड़ ें और फाटक.– (1) प्रत्य ेक खुली खनन स् िल का भशखर बाड़ लगाकर सरु भित रखा जाएगा।
(2) जहाँ ककसी खनन काय ष के पररर्ामस्िरूप बना उत्खनन ककसी सािषजभनक सड़क या ककसी ििन से 15
मीटर की दरू ी के िीतर तक फैला हो, तो उत्खनन के चारों ओर स्िायी प्रकृभत की सरं चना द्वारा पयाषप्त बाड़
लगाई जाएगी और उसका रखरखाि ककया जाएगा।
(3) जहाँ खनन संकक्रयाओं के फलस्ि रूप सतह धंस गया हो या धंसना सिं ाव् य हो और उससे व् यभक्तयों का
खतरे में पड़ जाना संिाव् य हो िहाँ माभलक,अभिकताष या प्रबंधक सतह के समस्त िेत्र को सरु भित और प्रिािी
रूप से बाड़ लगा कर रखेगा।
(4) ककसी शाफ्ट, स्ट ेपल भपट, सम् प, गोफ या अन् य खतरनाक स्ि ान के प्रत् येक प्रिशे -स्ि ान पर कारगर बाड़,
रोध या फाटक की व् यिस् िा की जाएगी जो इस प्रकार पररकभल्पत और बना होगा कक िह ककसी व् यभक्त को
उसमें प्रिेश करने या भगर जाने से प्रिािी रूप स े रोक सके।
(5) जहाँ कोई शाफ्ट या स्ट ेपल-भपट या गैलरी, भजसका ढलान िभै तज रेखा से 30 भििी से अभधक हो, सीध े
ककसी कायषस्ि ल या यात्रा के रास्ताको जाती हो िहाँ ऐसा स्ि ान या रास्ताऔर कायषस्ि ल जो उसकी नीभत की
तरफ भस्ित ह ै प्रिािी रूप से परररभित या अन् यिा संरभित ककया जाएगा भजससे भगरती हुई सामिी से होन े
िाले खतरे स े व् यभक्तयों को बचाया जा सके।
(6) खान में ककसी सड़क से खान के ककसी ऐसे िाग को तत् सयम ककसी िी कारर्िश जहाँ न काम होता हो
और जो ककसी प्रयोजन के भलए उपयोग में न आता हो, प्रत् येक प्रिेश-स्ि ान बाड़, रोध या फाटक स े युक् त ककया
जाएगा जो इस प्रकार पररकभल्पत और बना होगा कक िह ककसी व् यभक्त को अनिधानता से खान के उस िाग म ें
प्रिेश करने से रोक सके।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 107
(7) अस्ि ायी या स्ि ायी रूप से प्रयोग में न आने िाले शाफ्ट या खुली खनन स्ि ल और ऐसे उत् खात में या
उसके आस-पास जो खतरनाक ह,ै सिी स्ि ान पूर्षतया िर कदए जाएँगे या बाड़ से सुरभित रखे जाएँगे:
बशते कक यकद ित्रे ीय भनरीिक सह सभु िधाकताष की राय में प्रयोग में न आने िाली कोई ट्रेंच, भपट या
अन् य उत् खात खतरनाक हो तो िह भलभखत आदेश द्वारा उसकी पाश्ि षस्ि िूभम के समतल तक िर कदए जाने की
अपेिा कर सकेगा।
(8) इसके पूिष कक कोई खान बंद कर दी जाए या उसके िर्किंग स्ि भगत कर कदए जाएँ, माभलक,अभिकताष या
प्रबंधक प्रत् येक शाफ्ट, आनभत या खान की अन् य खुली के भशखर या प्रिेश-स्ि ान पर स्ि ायी रूप की संरचना
द्वारा बाड़ लगिा देगा, जो व् यभक्तयों को उसमें भगरने या प्रिेश करने से प्रिािी रूप से रोकने के भलए पयाषप्त
हो।
122. सहायक खनन पयिष िे क द्वारा जाचँ – (1) यात्रा के रास्तोंऔर अितरर्ों सभहत, खान में ऐसा प्रत् यके
स्ि ान, चाह े िह िूभम के नीचे या खुली खनन स्ि लों म ें हो जहा ँ काम ककया जाता ह ै या जहा ँ व् यभक्त रखे जात े
हों या जहाँ से उनका गजु रना अपेभित हो, ककसी सहायक खनन पयिष िे क या अन् य सिम व् यभक्त के
िारसाधनाधीन रखा जाएगा।
(2) ककसी सहायक खनन पयिष िे क या अन् य सिम व् यभक्त को सौंपी गई खान या भिभस्ट्रक् ट न इतना बड़ा होगा
और न इन भिभनयमों के अधीन कतषव् यों से भिन् न उसके ऐसे कतषव् य होंगे भजनसे यह सिं ाव् य हो कक इन भिभनयमों
के अधीन अपने भलए भिभहत कतषव् यों का सम् यक रूप से अनुपालन करने में उसको रूकािट हो, और यकद
पूिषगामी के बारे में कोई संदेह उत् पन् न हो तो िह भिभनश् चय के भलए मुख्य भनरीिक सह सुभिधाकताष को संदर्ितष
ककया जाएगा।
(3) प्रत् यके खान या भिभस्ट्रक् ट के प्रिेश-स्ि ान पर प्रबंधक द्वारा एक या अभधक स्ट ेशन भनयत ककए जाएँगे, और
लगातार उत् तरोत् तर पाभलयों में चलने िाली, खान के भसिाय उप-भिभनयम (4) के अधीन परीिा करने िाल े
व् यभक्तयों या ककसी पदधारी से भिन् न कोई व् यभक्त ऐसे ककसी स्ट ेशन के आगे तब तक नहीं जाएगा जब तक उन
सब रास्तोंऔर कायष-स्ि लों की, भजन तक ऐसे व् यभक्तयों का जाना अपेभित हो, खान या भिभस्ट्रक् ट के िार-
साधक सिम व् यभक्तयों द्वारा परीिा नहीं कर ली जाती और िे संतोर्प्रद रूप से संिाभतत और सरु भित दशा में
नहीं पाए जाते।
(4) उप-भिभनयम (3) में भनर्दषष् ट प्रत् येक स्ट ेशन पर सुस्प ष्ट रूप में ‘’स् टेशन’’ अंककत ककया जाएगा और िह
उतना बड़ा होगा कक उसमें ि े सब व् यभक्त आ सकें जो उस भिभस्ट्रक् ट में ककसी एक पारी में भनयोभजत हों।
(5) सहायक खनन पयिष िे क या अन् य सिम व् यभक्त ऐस े सहायकों के साि भजनकी िह अपेिा करे, ककसी पारी
में काम आरंि होन े से पूिष दो घंटों के अन् दर उसको सौंपी गई खान या भिभस्ट्रक् ट के प्रत् येक िाग का, भजसम ें
व् यभक्तयों को पारी के दौरान काम करना ह ै या उन् हें होकर जाना ह ै और सब रास्तोंऔर कायष-स्ि लों का, जहाँ
कायष अस्ि ायी रूप से रूका हो, भनरीिर् करेगा, और सिं ातन, स्ि च् छता, गैसों के अभस्तत् ि, छत और पाश्ि ों की108 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
हालत, स्ि त: तपन की मौजूदगी और आग के अन् य जोभखम और साधरर्त: व् यभक्तयों की सुरिा स े संबंभधत
भिर्यों की दभृ ष्ट से उसकी दशा अभिभनभित करेगा और प्रत् येक चार घंटों में, भजनमें पारी चालू रहती है, कम स े
कम एक बार सब रास्तोंऔर अन् य कायषस्ि लों के, भजन तक खान या भिभस्ट्रक् ट में लगे हुए व् यभक्तयों का जाना
अपेभित हो, इस प्रकार भनरीिर् ककया जाएगा।
(6) उप-भिभनयम (5) के अधीन जांच अनुमोकदत लौ िाली सुरिा लैम् प या इस प्रयोजन के भलए बनी कोई
अन् य अनुमोकदत उपकरर् स े तिा अभिमय सीम की दशा में, मख्ु य भनरीिक सह सभु िधाकताष द्वारा अनुमोकदत
काबषन मोनोऑक्स ाइि का पता लागने िाले उपकरर् से िी की जाएगी।
(7) खुली खनन स्ि ल या खनन स्ि लों की दशा में, सहायक खनन पयिष िे क ओिरहगैं ों, अन् िरकटों, ककनारों स े
3 मीटर के अन् दर के अबि पत् िरों, सामभियों या िृिों इत्य ाकद, यात्रा या िार ढोन े हते ु पगिंभियों, खनन स्ि ल
के भशखर पर के बाड़ों और अप्रयुक् त िाग या पररत् यक् त खनन स्ि लों, पगिंभियों और बेंचों के बगल-बगल की
बाड़ें जहाँ अपेभित हो, भनजी संरिी उपस् कर का प्रयोग और िंपों की दशा पर ध् यान देगा।
(8) अपनी पारी की समाभप्त पर सहायक खनन पयिष िे क या अन् य सिम व् यभक्त इस प्रयोजन के भलए
भिभनर्दषष् ट प्रपत्र में रखी गई भजल् दबि पृष्ठ संख् यांककत पुभस्तका में या पनु ः प्राप्त करन े योग्य और सपं ादन योग्य
न होन े िाल े इलक्े ट्रॉभनक रूप में अपने भनरीिर्ों का फल अभिलंब भलखेगा और ऐसी प्रत् येक ररपोटष भनरीिर्ों
की संपूर्ष और शुि ररपोटष होगी और भनम् नभलभखत का उसमें समािेश होगा, अिाषत्:-
(क) उप-भिभनयम (5) एिं (7) में भनर्दषष् ट भििरर्;
(ख) उसके िार-साधन के अधीन कायष करन े िाले व् यभक्तयों की संख् या;
(ग) ऐसे अनुदेश जो उसने अपनी पारी के दौरान व् यभक्तयों की सुरिा को सुभनभित करन े के प्रयोजन के भलए
कदए हों; और
(घ) भनरीिर्ों की तारीख और उनका समय, सहायक खनन पयिष िे क या अन् य सिम व् यभक्त के हस्त ािर/ई-
हस्तािर और ररपोटष भलखन े की तारीख और समय।
(9) खोदे जा रह े ककसी शाफ्ट की दशा में सिम व् यभक्त :-
(क) शाफ्ट के संपूर्ष अधस्त ल का िार-साधन करेगा और अपनी पारी में जब व् यभक्त शाफ्ट के अधस्त ल में काम
पर हों, शाफ्ट में रहगे ा;
(ख) पारी की समाभप्त पर शाफ्ट के ऊपर जाने िाला िह अंभतम व् यभक्त होगा, और यकद पारी के तुरन् त बाद
दसू री पारी चलती हो तो सहायक खनन पयिष िे क शाफ्ट के अधस्त ल को अगली पारी के िार-साधक के नीच े
उतरने तक नहीं छोड़ेगा; और
(ग) प्रत् येक भिस्फ ोटन के बाद और प्रत् येक पारी के प्रारंि पर और शाफ्ट में दो घंटों से अभधक काल के भलए
काम रूकने के प्रत् येक समय के बाद शाफ्ट के पाश्ि ों की परीिा करेगा और सब अिि िस् तुओं को, पूिष इसके कक
व् यभक्तयों को उतरने कदया जाए, हटा देगा।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 109
123. खतरों का पररिजनष .– (1) यकद ककसी खान या भिभस्ट्रक् ट के िार-साधक सिम व्य भक्त द्वारा ककसी
समय यह देखा जाए कक कोई खान या भिभस्ट्रक् ट ककसी कारर् स े खतरनाक है, तो िह तरु न् त खान या भिभस्ट्रक् ट
से सब व् यभक्तयों को बाहर कर लेगा और खान या भिभस्ट्रक् ट बाड़ से अलग कर कदया जाएगा भजससे व् यभक्त
अनिधानी से उसमें प्रिेश करने स े रोके जा सकें।
(2) सिम व् यभक्त तरु न् त प्रबंधक या सहायक प्रबंधक को खतरे के बारे में सूभचत िी करेगा, और इस त् य को
इस प्रयोजन स े रखी गई भजल् दबि पृष्ठ संख् यांककत पुभस्तका में या पनु ः प्राप्त करन े योग्य और गरै सपं ादन योग्य
इलेक्ट्रॉभनक रूप में ररकॉिष करेगा।
(3) प्रबंधक खान या भिभस्ट्रक् ट की सतकषता से परीिा करेगा या ककसी सिम व् यभक्त द्वारा कराएगा, और कोई
व् यभक्त, भसिाय िहाँ तक जहाँ ऐसा करना खतरे के कारर् के भिर्य में जाँच के भलए या उसको दरू करने के
भलए, या खोज के भलए, आिश् यक हो, खान या भिभस्ट्रक् ट में पुन: प्रिेश तब तक नहीं करने पाएगा जब तक खान
या भिभस्ट्रक् ट के भनरापद होन े की ररपोटष नहीं कर दी जाती।
(4) ऐसी प्रत् येक परीिा की ररपोटष इस प्रयोजन के भलए उप-भिभनयम (3) के अधीन रखी गई भजल् दबि पृष्ठ
संख् यांककत पुभस्तका में या पनु ः प्राप्त करन े योग्य और गरै सपं ादन योग्य इलक्े ट्रॉभनक रूप में भलखी जाएगी और
परीिा करने िाले व् यभक्त द्वारा उस पर हस्त ािर/ई हस्तािर करके तारीख िाली जाएगी।
(5) यकद खतरा दरू ककए जाने के पूिष खतरे को दरू करन े का कायष रोक कदया जाए, तो खान या भिभस्ट्रक् ट बाड़
द्वारा सुरभित रूप स े अलग कर कदया जाएगा, भजससे उस काल में व् यभक्तयों का उसमें प्रिेश प्रिािी रूप स े
रोका जा सके।
(6) इन भिभनयमों में ककसी बात के होते हुए िी :-
(क) जहाँ खतरा ज् िलनशील या अपायकर गैस के अभस्तत् ि स े पैदा होता ह ै िहाँ भिभनयम 153 के उपबंध लाग ू
होंगे; और
(ख) जहाँ खान के ककसी िाग के धुए ँ या अन् य भचन् ह का प्रकट होना यह उपदर्शषत करे कक आग या स्ि त: तपन
घरटत हो गया ह ै या शायद हो गया हो िहाँ भिभनयम 127 के उपबंध लागू होंगे।
124. ऊँचाई पर काय ष करना.– (1) कोई व् यभक्त ककसी 1.5 मीटर स े कम चौड़ी भशलाभनिेप या पगिंिी पर,
भजससे व्य भक्त 1.8 मीटर स े अभधक भगरना संिाव् य हो, तब तक न काम करेगा और न यात्रा करेगा जब तक
व्य भक्त पयाषप्त दढृ और य िोभचत रूप स े लगाई गई बचाि रेलों, बाड़, सरु िा पेटी या रस्स ी द्वारा संरभित न हों।
(2) जब कोई संयंत्र, मशीनरी, िकषशॉप या कोई अन् य शेि या संरचना भनमाषर्ाधीन ह ै या उसकी मरम् मत की
जानी ह ै या पुनरोिार ककया जाना ह ै और जहाँ लोगों को ऊँचाई पर कायष करने की अनुमभत दी गई है, िहाँ
सही रास्त ा, सीभ ढयाँ या सीढीनुमा रास्त ा भजसमें हिें रेल, गािष या मंच तिा बाड़युक् त चबूतरा कदए जाएँग े
ताकक ऊँचाई स े लोगों के भगरने का खतरा या जाभखम को रोका जा सके।
(3) ऊँचाई पर कायष करने के भलए अनुमभत प्राप्त प्रत् येक व् यभक्त को सुरिा पेटी या अन्य उभचत साधन मुफ्त म ें
अनुदत् त की जाएगी, जो व्य भक्त द्वारा भनष्प ाकदत की जानेिाली कायष-प्रकृभत के प्रकार और उपयुक् त मानकों के
अनुरूप होगा |110 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) जहाँ ऊँचाई पर काय ष करना आपेभित हो, भजसम ें भगरने का खतरा या जोभखम आिेभष्टत है, िहाँ पयाषप्त
और उपयुक् त भिजायन के और मजबूती के मंच या काय ष करने के भलए चबूतरे कदए जाएगँ े।
(5) उप-भिभनयम (4) में संदर्िषत मंच या कायष करने के चबूतरा पर लोगों के चढने या उससे उतारने के भलए
उभचत पहुचँ मागष देने के साि-साि भगरन े से रोकन े के भलए बाड़ कदया जाएगा।
(6) ऊँचाई से कायषरत व् यभक्तयों के भगरने से चोट लगने के खतरे या जोभखम को पूर्षत: समाप्त करने के भलए
प्रत् येक कायष-स्ि ल के ठीक नीचे पयाषप्त मजबूती और भिजायन का एक सुरिा जाल या अन्य उभचत साधन
लगाया जाएगा।
(7) खान में ऐसे कायष के भनष्प ादन के दौरान ऐसे सुरिा सािधाभनयों को सुभनभित करने के भलए प्रबंधक द्वारा
एक मानक सचं ालन प्रकक्रया भिरभचत की जाएगी तिा इस प्रयोजन हते ु इंजीभनयर और प्रबंधक द्वारा भिशेर्
रूप से प्राभधकृत सिम व् यभक्त और पदधारी के पयषिेिर् और भनयंत्रर् के अधीन इसका कायाषन्ि यन ककया
जाएगा।
(8) ऊँचाई पर काम करने स े संबंभधत कायष करने के भलए भनयुक्त प्रत्येक व्यभक्त ऐसे कायष में भिभधित प्रभशभित
होगा और उस े ऐसे काय ष के भनष्पादन में पयाषप्त अनुिि होगा ।
(9) यकद ककसी खान में ऊँचाई पर काम करने और उसस े जुड़े खतरों से संबंभधत कोई कायष ककया जाता है, तो
प्रबंधक यह सुभनभित करेगा कक चेकभलस्ट और िकष परभमट जारी करने की एक प्रर्ाली स्िाभपत और अनरु भित
हो।
125. सामान्य पिू ािष धाभनया.ँ – (1) कोई व् यभक्त ककसी स्ि ान स े या उसके पास से जो उसका प्राभधकृत कायष-
स्ि ल न हो, धाभत्िक न काटेगा, न हटाएगा।
(2) प्रत् यके व् यभक्त :-
(क) अपने कायष-स्ि ल की, काम प्रारंि करने से पूिष, और पारी के दौरान अन् तरालों पर िी, सतषकता से परीिा
करेगा; और
(ख) यकद कोई खतरे की भस्िभत कदखाई पड़े तो उस स्ि ान पर सब काम बन् द कर देगा और खतरे को दरू करन े
के भलए तुरन् त उपाय करेगा या ककसी पदधारी या खान या भिभस्ट्रक् ट के िार-साधक सिम व् यभक्त को सूभचत
करेगा।
(3) जहा ँ अनेक व् यभक्त एक साि काम कर रह े हों और उनम ें स े एक िार-साधक हो िहा ँ उप-भिभनयम (2)
द्वारा अपेभित परीिा िार-साधक व् यभक्त द्वारा की जाएगी।
(4) ककसी स्ि ान में धाभत्िक काटने िाला प्रत् येक व् यभक्त और धाभत्िक काटने की मशीन या काटने या लदाई
करने की अन् य कोई मशीन को चलाने िाला प्रत् येक व् यभक्त यह देखेगा कक उस स्ि ान के पररमार् उन पररमार्ों
से, जो इन भिभनयमों द्वारा इस भनभमत्त भिभनर्दषष् ट ककए गए ह,ैं अभधक न हों।
(5) कोई व् यभक्त ककसी सड़क या पगिंिी पर, भजसकी आनभत िभै तज रेखा तल से 30 भििी या अभधक हो,
कोई िार न ले जाएगा और न ले जाने कदया जाएगा।
(6) प्रत् येक सड़क या पगिंिी, भजस पर मनुष्य ों द्वारा िार िहन ककया जाता ह ै भनम्न भलभखत अपेिाओं के
अनुसार होगी, अिाषत:् -
(i) उसकी चौड़ाई एक मीटर से कम नहीं होगी; और[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 111
(ii) ऐसे प्रत् येक स्ि ान पर जहाँ िैभतज रेखा स े आनत 15 भििी से अभधक है, समतल सीभ ढया ँ ऐस े
लगाई जाएँगी कक प्रत् येक सीढी की ऊध् िाषकार ऊँचाई 0.18 मीटर स े अभधक न हो और ककनारे स े पृष्ठ की दरू ी
0.35 मीटर से कम न हो।
(7) ककसी िी व्यभक्त को इतना िारी िार उठाने, ले जाने या स्िानांतररत करने के भलए भनयोभजत नहीं ककया
जाएगा भजससे उस व्यभक्त को शारीररक चोट या स्िास््य को हाभन होने की संिािना हो।
(8) प्रत्येक व्यभक्त यह सुभनभित करेगा कक औजार, लकड़ी, पत्िर या अन्य िस्तुएं ककसी शाफ्ट या भिप गैलरी
में, जहां काम चल रहा हो, ऐसी भस्िभत में न रखी जाए ं या रहने दी जाए ं भजससे ि े शाफ्ट या गैलरी में भगर
सकती हों।
(9) ककसी िी व्यभक्त को खदान के ककसी िी दरू स्ि िाग में अकेले काम करने की अनमु भत नहीं दी जाएगी, जहा ं
दघु षटना होने पर व्यभक्तयों को शीघ्रता स े खोजा या सहायता नहीं की जा सकेगी।
(10) ककसी िी अनुििहीन व्यभक्त को खदान में ऐसे ककसी िी कायष के भलए भनयोभजत नहीं ककया जाएगा
भजससे उसे या अन्य व्यभक्तयों को गंिीर खतरा हो, भसिाय ककसी अनुििी व्यभक्त के पयषिेिर् और मागषदशषन
के।
अध्याय – X
आग, धलू , गसै और पानी स े होन े िाल े खतरों स े बचन े के भलए सािधाभनयां
126. आग स े बचाि के सामान्य सािधाभनया।ं - (1) ककसी िी खदान में तेल, िीस, कैनिस या अन्य ज्िलनशील
पदािष का िंिारर् अभिरोधी पात्र के अलािा नहीं ककया जाएगा।
(2) िूभमगत कायों में भचकना या तैलीय अपभशष्ट को भनयभमत रूप स े प्रबंधक द्वारा भनर्दष्टष सतह पर हटा
कदया जाएगा और भनयभमत अंतराल पर उसका भनपटान ककया जाएगा।
(3) ई-अपभशष्ट का भनपटान भनयभमत आधार पर सुरभित तरीके से ककया जाएगा।
(4) खुली खदानों के कायो या कायषशालाओं के मामले में भचकना और तैलीय अपभशष्टों का भनयभमत रूप स े
सुरभित तरीके से भनपटान ककया जाएगा।
(5) कोई िी व्यभक्त ककसी लकड़ी, लकड़ी के ढांच े या अन्य ज्िलनशील पदािष पर या उसके समीप कोई नंगी
बत्ती या लैंप या चीज की छड़ी या काई का टुकड़ा नहीं रखेगा, न फेंकेगा, न रखन े या फेंकने की अनुमभत देगा।
(6) जहां भिस्फोटकों का उपयोग स्टल्स, सेट और च्यूट का भहस्सा बनने िाली ककसी िी लकड़ी को उड़ाने में
ककया जाता ह,ै तो शॉट-फायटरंग चलाने से पहले और बाद में लकड़ी पर पयाषप्त पानी िाला जाएगा।
(7) ककसी खदान के सिी प्रिेश द्वारों से 10 मीटर की िैभतज दरू ी के िीतर सिी सतही सरं चनाएं और सहारे
गैर-दहनशील सामिी से बने होंगे:
बशते कक यह उप-भिभनयमन ककसी शाफ्ट या भिनज़ के शीर्ष पर अस्िायी सरं चनाओं, समिनष ों और
आिरर्ों पर लागू नहीं होगा जो िूबने की प्रकक्रया में ह ै और रस्सी कैपेल द्वारा सचं ाभलत शाफ्ट-किटरंग के छोटे
ढक्कन पर िी लागू नहीं होगा।112 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(8) सूखी पभत्तयों या सूखी िनस्पभत को जमा होने या रहने की अनुमभत नहीं दी जाएगी, और चौबीस घंटे
की अिभध के िीतर उपयोग के भलए आिश्यक सामिी के अलािा अन्य दहनशील सामिी, और ज्िलनशील
सामिी को खदान के ककसी िी प्रिेश द्वार से 15 मीटर की दरू ी के िीतर संिहीत नहीं ककया जाएगा, भजस े
िूभमगत कामकाज स े प्रिािी रूप से बंद नहीं ककया गया ह।ै
(9) कोई िी व्यभक्त, प्रबंधक की भलभखत अनुमभत के भबना और उसमें भनर्दषष्ट भिशेर् उद्देश्य के भलए, ककसी
खदान के ककसी िी प्रिेश द्वार से 15 मीटर की दरू ी के िीतर सतह पर आग नहीं जलाएगा या आग जलाने की
अनुमभत नहीं देगा और ऐसी सिी अनुमभतयों को उद्देश्य के भलए रखी गई भजल्दबंद पृष्ठ िाली पुस्तक में या
पुनप्राषभप्त योग्य और गैर-संपादन योग्य इलेक्ट्रॉभनक रूप में दजष ककया जाएगा:
बशते कक यह उप-भिभनयमन ऊध्िाषधर बॉयलरों के अलािा अन्य बॉयलरों पर लागू नहीं होगा।
(10) िेत्रीय भनरीिक-सह-सुभिधाकताष की भलभखत में पूिष अनुमभत के अलािा , और ऐसी शतों के अधीन, जो
उसमें भनर्दषष्ट की जा सकती ह,ैं शाफ्ट लाइडनंग या ककसी कमरे, आिास, या िूभमगत ककसी मशीनरी या
उपकरर् के भनमाषर् में, या उसके संबंध में ककसी लकड़ी या अन्य दहनशील सामिी का उपयोग नहीं ककया
जाएगा।
(11) लकड़ी के टुकड़े ककसी िी िूभमगत कायषस्िल पर नहीं छोड़े जाएंगे, बभल्क प्रत्येक पारी के अंत में प्रबंधक
द्वारा भनर्दषष्ट सतह पर हटा कदए जाएंगे।
(12) कोई िी व्यभक्त िूभमगत ककसी कायषस्िल पर आग नहीं जलाएगा या आग जलाने की अनुमभत नहीं देगा:
बशते कक ऐसी खदान के मामले में भजस पर रेगलु शे न 153 लागू नहीं होता ह,ै मैनेजर के भलभखत आदेश
से इजाज़त भमलन े पर ज़मीन के नीचे फ्लेम या इलेभक्ट्रक िेडल्िंग या ररपेयटरंग उपकरर् का इस्तेमाल ककया जा
सकता ह ै और ऐसे हर आदशे में उस व्यभक्त का भज़क्र होगा जो उपकरर् का इंचाजष होगा; और ऐस े व्यभक्त की
यह ड्यूटी होगी कक जब ज़मीन के नीचे उपकरर् की ज़रूरत न रह े तो िह उसे िापस ज़मीन पर ले आए:
भिभनयमन 153 के प्रािधान लागू होते ह,ैं यकद िेत्रीय भनरीिक-सह-सुभिधाकता ष से भलभखत में पूिष
अनुमभत प्राप्त कर ली गई ह ै और ऐसी शतों के अधीन , जैसा कक उसमें भनर्दषष्ट ककया जा सकता ह ै , तो लौ या
इलेभक्ट्रक िेडल्िंग या मरम्मत उपकरर् का उपयोग िूभमगत ककया जा सकता ह ै ।
(13) कोई िी व्यभक्त पोटेबल लाइट या लैंप को तब तक जमीन के नीच े नहीं छोड़ेगा, जब तक कक उसने उस े
िहां रहने िाले ककसी अन्य व्यभक्त के भजम्मे न रख कदया हो।
(14) ककसी भशफ्ट के अंत में, जब तक कक खदान में लगातार कई भशफ्टों में काम न ककया जा रहा हो, सिी
व्यभक्तयों के खदान छोड़ने के बाद, सिी लाइटें बुझा दी जाएंगी और सारी भबजली काट दी जाएगी:
बशते कक इस उप-भनयमन में ऐसा कुछ िी नहीं माना जाएगा जो भशफ्ट समाप्त होने के बाद िूभमगत
यांभत्रक िेंटीलेटर या सहायक पंखे को चलाने पर रोक लगाता हो।
(15) ज़मीन के नीचे आग लगने या अपने आप गमष होने या ककसी पास की खदान से खदान में आग फैलने स े
रोकन े का इंतज़ाम ककया जाएगा; और ऐसी ककसी िी आग या गमष होन े को कंट्रोल करने या अलग करन े के भलए
ज़रूरी कदम उठाए जाएंगे:
बशते कक अगर रीजनल भनरीिक-सह- सुभिधाकता ष की राय में इस सब-रेगुलेशन के भनयमों का पालन
नहीं ककया गया ह ै या उठाए गए कदम काफी नहीं ह,ैं तो िह भलखकर आदेश देकर, उसमें बताए गए समय के
अंदर और सािधाभनया ं बरतने या कदम उठान े की मागं कर सकता ह;ै और अगर ऐसे ककसी आदेश का तय
समय के अंदर पालन नहीं ककया जाता ह,ै तो रीजनल भनरीिक-सह- सुभिधाकताष आदेश का पालन होने तक,
खदान या उसके ककसी भहस्स े में ऐसे ककसी िी व्यभक्त को काम पर रखने पर रोक लगा सकता ह,ै भजसका काम,
उसकी राय में, आदेश का पालन करने के भलए ज़रूरी नहीं ह।ै
(16) प्रत्येक खदान में ककसी िी आग का शीघ्र पता लगाने, उस पर भनयंत्रर् पाने और उसे बुझान े के भलए
समुभचत एिं पयाषप्त व्यिस्िा की जाएगी।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 113
(17) प्रत्येक खदान के माभलक, अभिकताष और प्रबंधक को खदान में आग लगने और उसके फैलने को रोकने,
उसका पता लगाने और उसका मुकाबला करने के भलए खदान संचालन की प्रकृभत के अनुरूप उपाय और
सािधाभनयां बरतनी होंगी।
(18) एक सिम व्यभक्त कम से कम हर सात कदन में एक बार खदान के सिी प्रिेश द्वारों के ऊपर, सिी खुली
खदानों का भनरीिर् करेगा ताकक यह पता लगाया जा सके कक भिभनयमन के तहत भनधाषररत सािधाभनयों का
पालन ककया गया ह ै या नहीं और ककसी िी तरह की आग लगने या उसके ककसी सकं ेत की उपभस्िभत के भलए
भनरीिर् करेगा।
(19) उप-भिभनयम (18) के अन्तगषत ककए गए प्रत्येक भनरीिर् का अभिलेख इस प्रयोजन हते ु रखी गई
भजल्दबंद पृष्ठ पुभस्तका में या पुनप्राषभप्त योग्य तिा गैर-संपादन योग्य इलैक्ट्रॉभनक प्रारूप में रखा जाएगा, भजस
पर भनरीिर् करने िाले व्यभक्त द्वारा भिभधित हस्तािर या ई-हस्तािर तिा कदनांक अंककत होगा।
127. आग लगन े के बाद सािधाभनया।ं - (1) अगर खदान के ककसी िी भहस्स े में धआु ं या दसू रे भनशान कदखें,
भजनसे पता चले कक आग लग गई ह ै या अपने आप हीटटंग हो सकती ह,ै तो आग या हीटटंग से भनपटने के भलए
भबना देर ककए असरदार कदम उठाए जाएंगे और उन लोगों के अलािा भजनका खदान में होना आग या हीटटंग
से भनपटने के भलए ज़रूरी समझा जाए, बाकी सिी लोगों को तरु ंत खदान से बाहर भनकाल कदया जाएगा।
(2) सब-रेगुलेशन (1) में बताई गई आग या हीटटंग से भनपटने या उसे बंद करने के भलए ज़रूरी लोगों के
अलािा, ककसी िी दसू रे व्यभक्त को खदान में तब तक नहीं आने कदया जाएगा जब तक आग या हीटटंग बुझ न
जाए या उस े असरदार तरीके से बंद न कर कदया जाए और मैनजे र या सहायक मनै ेजर जांच न कर ल े और
खदान को सरु भित घोभर्त न कर कदया जाए और ऐसी हर जाचं की ररपोटष इस मकसद के भलए रखी गई एक
भजल्दबंद ककताब में या कफर िापस पाने लायक और न बदलने लायक इलेक्ट्रॉभनक फॉमष में ररकॉिष की जाएगी
और जांच करने िाले व्यभक्त द्वारा उस पर साइन या ई-साइन और तारीख िाली जाएगी:
बशते कक रीजनल भनरीिक-सह- सुभिधाकता ष , भलखकर आदेश देकर और उसम ें बताई गई शतों के
तहत, आग या हीटटंग स े भनपटने के भलए ज़रूरी लोगों के अलािा, खदान में दसू रे लोगों को काम पर रखन े की
इजाज़त दे सकता ह।ै
(3) उप-भिभनयम (2) के अंतगषत अपेभित जांच काबनष मोनोऑक्साइि तिा ज्िलनशील गैसों का पता
लगाने के भलए मुख्य भनरीिक-सह-सुभिधाकताष द्वारा अनमु ोकदत उपकरर् से की जाएगी।
(4) उस पूरे समय के दौरान जब आग या हीटटंग से भनपटने या उसे रोकने का कोई काम चल रहा हो,
(क) एक सिम व्यभक्त पूरे समय मौके पर मौजूद रहगे ा;
(ख) आग िाले िेत्र में ककसी हाभनकर, दम घोंटने िाली या ज्िलनशील गैसों, ज्िाला, िाप और बाहर
भनकली या लुढकती गमष सामिी, जल गैस के भिस्फोट और दरारों, गड्ढों में भगरने स े लोगों को होन े
िाले खतरे को रोकने के भलए पयाषप्त सािधाभनयां बरती जाएंगी;
(ग) िूभमगत सिी स्िानों पर या उनके भनकट भनम्नभलभखत उपलब्ध रखे जाएंगे-
(i) आपातकाल में उपयोग के भलए पयाषप्त संख्या में स्ि-बचाि उपकरर् और कम से कम दो
ट्यूब उपकरर् या अन्य उपयुक्त उपकरर्;
(ii) काबषन मोनोऑक्साइि, ज्िलनशील गैसों, ऑक्सीजन की कमी और हाभनकारक गसै ों का
पता लगाने के भलए मुख्य भनरीिक-सह- सुभिधाकताष द्वारा अनुमोकदत मल्टीगैस भिटेक्टर;
और
(iii) पयाषप्त संख्या में उपयुक्त अभिशामक यंत्र उपलब्ध कराए जाएंगे।
(5) प्रत्येक खान का प्रबंधक भनम्नभलभखत के भलए एक भिस्तृत योजना तैयार करेगा और स्िाभपत करेगा-114 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(क) उपयुक्त अभिशमन व्यिस्िा का प्रािधान और रखरखाि;
(ख) ककसी िी प्रकार की तापन, धुएं या आग की रोकिाम, पता लगाना, भनपटना और
भनयंत्रर्;
(ग) आग या तापन को भनयंभत्रत करन े या अलग करने के भलए ककए गए सुरिात्मक उपायों
की जांच और रखरखाि;
(घ) बताए गए ऑपरेशन में लगे लोगों की सुरिा पक्का करना ; और
(ङ) भस्िभत के अनुसार योजना को उपयुक्त रूप से संशोभधत ककया जाएगा और अपिेट रखा
जाएगाI
128. अभिशमन उपकरर्।- (1) प्रत्येक खान में-
(क) जब तक िेत्रीय भनरीिक-सह-सुभिधाकता ष द्वारा छूट न दी जाए, प्रिािी अभिशमन के उद्देश्य स े
अभिकताष या प्रबंधक द्वारा िूभमगत सिी काय ष स्िानों और अभि जोभखम िाले अन्य सिी स्िानों
पर पयाषप्त दबाि पर पयाषप्त मात्रा में पानी उपलब्ध कराया जाएगा;
(ख) अभिशमन उपकरर्ों की उपयुक्त आपूर्तष के साि अभिशमन केंद्र स्िाभपत ककए जाएंगे और उन्ह ें
सतह पर तिा िूभमगत दोनों ही स्िानों पर सुभिधाजनक स्िानों पर बनाए रखा जाएगा;
(ग) रेत या गैर-दहनशील सामिी की पयाषप्त आपूर्त ष तिा पयाषप्त मात्रा में उपयुक्त पोटेबल अभिशामक
यंत्र या स्िचाभलत रूप स े सचं ाभलत अभि शमन उपकरर् उपलब्ध कराए जाएंगे-
(i) ककसी खान या भजले के प्रत्यके प्रिेश द्वार पर और उपयोग में आने िाले प्रत्येक शाफ्ट या
भिनज़ के प्रत्येक अितरर् और तल पर;
(ii) प्रत्येक स्िान जहां लकड़ी, िीस, तेल या अन्य ज्िलनशील पदािष संिभहत ककया जाता ह;ै
(iii) प्रत्येक इंजन कि, िीजल इंजन अनुरिर् कायषशाला, कफडलंग स्टेशन, िण्िारर् बैटरी
चार्जिंग स्टेशन;
(iv) प्रत्येक ट्रैक पर लगे तिा ट्रैक रभहत लोकोमोरटि, स्ि-चाभलत मानि सिारी कार तिा
कार्मषक िाहक पर;
(v) प्रत्येक स्िायी तिा अस्िायी भिद्युत अभधष्ठापन;
(vi) उन स्िानों पर जहा ं आकष या ज्िाला के साि िेडल्िंग, कटाई या सोल्िटरंग की जा रही हो;
(vii) प्रत्येक मशीनरी, संयंत्र और स्िापनाएं; और
(viii) अभि जोभखम के ऐसे अन्य भिशेर् स्िान जो प्रबंधक द्वारा भनर्दषष्ट ककए जा सकते ह;ैं
(घ) खुली खदानों में इस्तेमाल होने िाली हर िारी भमट्टी हटाने िाली मशीनरी में स्िचाभलत रूप स े
चलने िाली आग का पता लगाने और उस े बुझाने िाला उपकरर् या प्रर्ाली लगाई जाएगी:
खुली खदानों में उपयोग ककए जाने िाले 35 टन से कम िमता िाले ट्रकों, रटपरों और िम्परों के मामल े
में , यह पयाषप्त हो सकता ह ै यकद अधष-स्िचाभलत प्रकार की अभि शमन प्रर्ाली प्रदान की गई हो;
(ङ )प्रत्येक बेल्ट िाइि, बेल्ट टेक अप, इलेभक्ट्रकल कंट्रोल, भगयर ररड्यूडसंग यूभनट और कन्िेयर बेल्ट
भसस्टम पर अन्य रर्नीभतक स्िानों के ऊपर भिशेर् रूप से भिजाइन ककए गए िॉटर फोम स्प्रे, िेल्यूज भसस्टम
या सूखे रसायन स्िाभपत ककए जाएंगे;
(च) कन्िेयर बेल्ट की लंबाई के साि उपयुक्त अभि पहचान प्रर्ाली स्िाभपत की जाएगी।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 115
(छ) लोडिंग और ट्रांसपोर्टिंग मशीनों, रूफ बोडल्टंग मशीनों, भिडलंग मशीनरी, यात्री िाहक पर पयाषप्त
संख्या में उपयुक्त अभिशामक या स्िचाभलत रूप से संचाभलत अभि शमन उपकरर् प्रदान ककए
जाएंगे।
(2) सोिा-एभसि प्रकार के अभिशामक या पानी का उपयोग तेल या भिद्युतीय आग को बझु ाने के भलए नहीं
ककया जाएगा।
(3) फोम प्रकार के अभिशामकों का उपयोग भिद्युत आग बुझाने के भलए नहीं ककया जाएगा।
(4) ऐसे अभिशामक यंत्र भजनमें रसायन होते ह ैं और जो चलाए जाने पर जहरीली या हाभनकारक गसै ें
छोड़ते ह,ैं उन्ह ें जमीन के नीचे उपलब्ध नहीं कराया जाएगा या इस्तेमाल नहीं ककया जाएगा।
बशते कक उप-भिभनयम (2), (3) या (4) में कुछ िी िूभमगत अभिशामक यंत्रों के उपयोग पर रोक नहीं
लगाएगा जो संचाभलत होने पर काबषन िाइऑक्साइि उत्सर्जषत करत े ह।ैं
(5) सिी प्रकार की अभिशामक और अभि शमन प्रर्ाभलयाँ, भजनमें स्िचाभलत अभि पता लगान े और शमन
प्रर्ाभलयाँ शाभमल ह,ैं भजनका प्रयोग मशीनरी और संयंत्र में ककया जाएगा, भजसमें िारी भमट्टी हटाने िाली
मशीनरी, सामिी और रसायन शाभमल ह,ैं भजनका प्रयोग सतह पर और साि ही िूभमगत दोनों खदानों में अभि
सीडलंग, बुझाने या शमन प्रर्ाभलयों में ककया जाएगा, ऐसे प्रकार और मानक की होंगी, जैसा कक मुख्य
भनरीिक-सह-सुभिधाकताष द्वारा सामान्य या भिशेर् आदेश द्वारा अनुमोकदत ककया गया हो।
(6) एक सिम व्यभक्त महीने में कम स े कम एक बार अभिशामक यंत्रों की जाचं करेगा और
आिश्यकतानुसार अभिशामक यंत्रों को खाली करेगा और िरेगा ताकक यह सुभनभित हो सके कक ये ठीक से काम
करने की हालत में ह ैं तिा ऐसी ककसी जाचं के दौरान या अन्यिा पाई गई ककसी कमी को तुरंत ठीक ककया
जाएगा।
(7) उप-भनयम (6) के अन्तगषत की गई प्रत्येक परीिा की ररपोटष, इस प्रयोजन के भलए रखी गई सभजल्द-
पृभष्ठत पुभस्तका में या पनु प्राभष प्त योग्य तिा गरै -सपं ादन योग्य इलक्ै ट्रॉभनक रूप म,ें परीिा करने िाले व्यभक्त
द्वारा यिाभस्िभत , भिभधित हस्तािररत या ई-हस्तािररत तिा कदनांककत की जाएगी ।
129. आग बझु ान े का व्य िस्ि ा. - (1) हर खदान का माभलक, अभिकताष और मैनेजर खदान में आग बुझाने के
भलए एक सही इंतज़ाम करेगा। इसके भलए िह खदान के ऊपर और नीचे हर मेन हॉलजे रोि पर मेन शाफ्ट के
पास इनटेक एयरिे में सही जगहों पर फायर स्टेशन लगाएगा और हर फायर स्टेशन में आग बुझाने के भलए
ज़रूरी सामान रखेगा।
(2) पयाषप्त संख्या में योजनाएँ तैयार की जाएँगी, भजनमें अभिशामक उपकरर् जैसे पानी की मुख्य लाइनें,
नल, दमकल केंद्र, पडम्पंग स्टेशन, िायु-संचार प्रर्ाली और बचने का रास्ता आकद दशाषए जाएँगे, साि ही उनमें
ऐसी अन्य जानकारी िी होगी जो आग बुझाने के भलए उपयोगी हो सकती ह ै और इन योजनाओं की अद्यतन
प्रभतयाँ सतह पर और ज़मीन के नीचे उपयुक्त स्िानों पर उपलब्ध रखी जाएँगी।
(3) सिी संयंत्रों, मशीनरी और िारी भमट्टी हटाने िाली मशीनरी के ऑपरेटरों सभहत पयाषप्त संख्या म ें
व्यभक्तयों को अभिशामक यंत्रों, फायर हाइिेंट प्रर्ाली और अभिशमन के प्रयोग में प्रभशभित ककया जाएगा और
ऐसे व्यभक्तयों को आमतौर पर खदान में और भिशेर्कर उनके कायषस्िल के भनकट उपलब्ध कराए गए सिी
अभिशमन उपकरर्ों की भस्िभत से पररभचत कराया जाएगा।
(4) प्रत्येक खदान का प्रबंधक एक मानक संचालन प्रकक्रया तैयार करेगा भजसमें आग की चेतािनी देन,े
खदान से कमषचाररयों को समय पर िापस बुलाने और अभिशमन अभियान चलाने के भलए अपनाई जान े िाली
प्रकक्रयाएं सभम्मभलत होंगी ।116 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
130. काबनष मोनोऑक्साइि, नाइट्रस धएु ं और दसू री नकु सानदायक गसै ों की जाचं के भलए उपकरर्। – हर
िूभमगत खदान में, काबषन मोनोऑक्साइि, नाइट्रस धुएं और दसू री नुकसानदायक गसै ों का पता लगाने के भलए
मुख्य भनरीिक-सह- सुभिधाकताष से मंज़ूर सही तरह का उपकरर् इस्तेमाल के भलए हमेशा उपलब्ध रहगे ा।
131. ज़मीन के नीच े आग लगन े पर सािधाभनया।ं - (1) हर उस खदान म ें भजसमें ज़मीन के नीच े काम करत े
समय आग लगती ह ै या अपने आप गमी पैदा होती ह ै (चाह े ऐसी आग को सही सील से अलग ककया गया हो या
नहीं), आग लगे हुए भहस्से या सेक्शन के आस-पास के ककसी िी भहस्से या सेक्शन में, या भजसके आग लगने की
आशंका हो, मुख्य भनरीिक-सह- सुभिधाकताष की भलखी हुई इजाज़त के भबना और उसमें बताई गई शतों के
तहत कोई िी काम नहीं ककया जाएगा।
(2) प्रत्येक खदान में, भजस पर उप-भनयम (1) और भनयम 15-3 लागू होत े ह,ैं कम स े कम हर तीस कदन म ें
एक बार पुराने काम करने िाले िेत्र या आग लगन े या अपने आप गमष होने की भस्िभत में सील के पीछे की
िायुमंिलीय भस्िभतयों का पता लगाने की व्यिस्िा की जाएगी, जब तक कक ऐसी सील भिस्फोट के बल का
सामना करने में सिम न हों:
बशते कक मुख्य भनरीिक-सह- सुभिधाकता ष , भलखकर आदेश देकर और उसम ें बताई गई शतों के तहत,
ककसी िी खदान या उसके भहस्से को इस सब-रेगुलेशन के लागू होने से छूट दे सकता ह,ै जहाँ उसकी राय म ें
ऐसी खास मुभश्कलें हों भजनस े इसके भनयमों का पालन करना प्रैभक्टकल न हो।
(3) ज़मीन के नीचे आग लगने या अपने आप लगने िाली गमी को अलग करने या कंट्रोल करने के भलए
लगाई गई हर सील पर नंबर होगा, और िह काफ़ी मज़बूत होगी और उस े इस तरह बनाए रखा जाएगा कक
उसमें से हिा या गैस का कोई लीकेज न हो और जहाँ ऐस े ककसी स्टॉप के पीछे पानी जमा होने की संिािना हो,
िहाँ स्टॉप में एक सही पाइप या कोई और भििाइस लगाया जाएगा भजसस े हिा या गसै िगैरह का कोई लीकेज
होने कदए भबना पानी भनकल जाए।
(4) जहां ककसी खान या उसके िाग में उप-भनयम (3) के प्रािधानों का अनुपालन नहीं ककया गया ह ै या
जहां िेत्रीय भनरीिक-सह-सुभिधाकताष की राय में इस प्रकार उठाए गए कदम अपयाषप्त ह,ैं िहां माभलक,
अभिकताष या प्रबंधक को नोरटस देकर उनस े ऐसे सरु िात्मक उपाय करने की मांग की जा सकती ह,ै ऐसे समय
के िीतर, जसै ा कक उसमें भनर्दषष्ट ककया जा सकता ह:ै
बशते कक नोरटस की ज़रूरतों का पालन न करने की भस्िभत में, रीजनल भनरीिक-सह- सुभिधाकता ष
भलभखत आदेश के ज़ररए, नोरटस की ज़रूरतों का उसकी संतुभष्ट के अनुसार पालन होने तक, खदान या उसके
ककसी भहस्से में ऐसे ककसी व्यभक्त को काम पर रखने पर रोक लगा सकता ह,ै भजसका रोज़गार, उसकी राय म,ें
ऊपर बताई गई ज़रूरतों का पालन करन े के भलए ज़रूरी नहीं ह।ै
(5) एक सिम व्यभक्त कम से कम प्रत्येक सात कदन में एक बार िूभमगत आग अििा स्ितःस्फूतष तापन को
अलग रखने या भनयंभत्रत करने के भलए स्िाभपत सिी सीलों का भनरीिर् करेगा और ऐसे प्रत्येक भनरीिर् के
दौरान िह प्रत्येक सील की सामान्य भस्िभत सुभनभित करेगा, उसम ें ररसाि तिा गैस की उपभस्िभत की जांच
करेगा तिा सील के बाहर िातािरर् के तापमान और आद्रषता का पता लगाएगा।
(6) सिम व्यभक्त उप-भनयम (5) के अधीन भनरीिर् करने के पिात, इस प्रयोजन के भलए कदए गए चेक-
बोिष पर, सील पर उपयुक्त स्िान पर, कदनांक सभहत अपने हस्तािर करेंगे और भजस े कम स े कम तीन महीने की
अिभध के भलए बनाए रखा जाएगा और ऐस े प्रत्येक भनरीिर् की ररपोटष िी इस प्रयोजन के भलए रखी गई
भजल्दबंद पृष्ठांककत पुभस्तका में या पुनप्राषभप्त योग्य तिा असंपादन योग्य इलेक्ट्रॉभनक रूप में दजष की जाएगी और
भनरीिर् करन े िाले व्यभक्त द्वारा उस पर हस्तािर या ई-हस्तािर ककए जाएंगे और कदनांक िाला जाएगा:
बशते कक रीजनल भनरीिक-सह- सुभिधाकता ष , भलखकर आदेश देकर, ऐसे इंस्पेक्शन को ऐसे छोटे
इंटरिल पर करने की ज़रूरत बता सकता ह,ै जसै ा उसमें बताया जा सकता ह।ै[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 117
132. धलू स े बचाि। - (1) हर खदान का माभलक, अभिकता ष या मैनजे र धूल के भनकलन े को कम करन े
और ज़मीन के नीचे या सतह पर ककसी िी काम की जगह पर हिा में घुसने िाली धूल को रोकने के भलए ज़रूरी
कदम उठाएगा और यह पक्का करेगा कक मज़दरू ों का सांस लेने लायक धूल के संपकष में आना उस हद तक कम हो
जो सही मायने म ें प्रैभक्टकल हो, लेककन ककसी िी हालत में लोगों की सहे त के भलए नुकसानदायक भलभमट स े
ज़्यादा न हो।
(2) इस भिभनयमन के प्रयोजनों के भलए, ककसी स्िान को ककसी व्यभक्त के काय ष करने, गुजरन े या रहने के
भलए हाभनरभहत भस्िभत में नहीं माना जाएगा, यकद हिा में सांस लेन े योग्य धूल की आठ घंटे की समय-िाररत
औसत सांद्रता -
(क) हिा के mg प्रभत क्यूभबक मीटर में, भजसे मुख्य भनरीिक-सह- सुभिधाकताष द्वारा
जनरल या स्पेशल आदेश स े मंज़ूर और तय ककए गए प्रोसेस के अनसु ार िस्ट सैंपलर से
सैंपल ककया गया हो, मैंगनीज ओर के मामले में पाँच से ज़्यादा हो और यह िैल्यू दस के
नंबरों को दसू रे मामलों में मौजूद फ्री रेभस्परेबल भसभलका के परसेंटेज से भििाइि करके
भनकाली गई हो; या
(ख) सांस लेन े लायक एस्बेस्टस फाइबर के मामले में, एक खुले मेम्ब्रेन कफल्टर से सैंपल
भलए गए और मुख् य भनरीिक सह सुभिधाकता ष द्वारा समय-समय पर आम या खास
आदेश से बताई गई प्रकक्रया के अनुसार और उसके द्वारा मंज़ूर ककए गए टाइप के फेज़
कॉन्ट्रास्ट ऑभप्टकल माइक्रोस्कोप से मापे गए हिा के प्रभत भमलीलीटर एक फाइबर स े
ज़्यादा।
स्पष्टीकरर्.– इस भिभनयमन के प्रयोजनों के भलए, "श्वसनीय एस्बेस्टस फाइबर" शब्द का अि ष
क्राइसोलाइट, एक्शनोलाइट, एमोसाइट, एंिोकफलाइट, क्रोककिोलाइट, ट्रेमोलाइट या इसके ककसी िी
भमश्रर् के खभनज भसभलकेट का कोई िी रेशेदार रूप ह ै भजसकी लंबाई 5 माइक्रोमीटर से अभधक और
व्यास 3 माइक्रोमीटर से कम हो और लंबाई-व्यास का अनपु ात तीन से एक से अभधक हो।
(3) प्रत्येक खान का माभलक, अभिकताष या प्रबंधक इन भिभनयमों के लाग ू होन े के तीन महीने के अन्दर और
उसके पिात प्रत्येक तीन महीने में कम से कम एक बार या जब िी िेत्रीय भनरीिक-सह-सुभिधाप्रदाता भलभखत
आदेश द्वारा ऐसी अपेिा करे, प्रत्येक कायषस्िल पर, जहा ं िायुजभनत धूल उत्पन्न होती ह,ै िायु का नमूना लेगा
तिा उसमें श्वसनीय धूल की सांद्रता भनधाषररत करेगा :
बशते कक, यकद ककसी कायषस्िल पर ककसी माप में उप-भिभनयमन (2) में भनर्दषष्ट स्िीकायष सांद्रता के
पचास प्रभतशत या पचहत्तर प्रभतशत से अभधक सांद्रता दशाषई जाती ह ै (भजसे आगे 'अनुमेय सीमा' के रूप म ें
संदर्िषत ककया जाएगा) तो बाद के माप क्रमशः दो महीने या एक महीने से अभधक अंतराल पर नहीं ककए
जाएंगे;
आगे यह िी कहा गया ह ै कक ऐसे माप ककसी िी प्लांट, इकक्वपमेंट या मशीनरी के चालू होने पर या ककसी
नए काम के तरीके को शुरू करने पर या उसमें ककसी ऐसे बदलाि पर तुरंत ककए जाएंगे, भजससे हिा में मौजूद
सांस लेन े लायक धूल के लेिल में कोई बड़ा बदलाि आने की संिािना हो।
(4) उप-भिभनयम (3) के अन्तगषत भलए गए नमूने, जहां तक संिि हो, काम करने िाले व्यभक्तयों के धूल के
संपकष में आने के स्तरों के प्रभतभनभध होंग े और इस प्रयोजन के भलए, नमनू ा लने े िाले को धूल उत्पादन डबंद ु के
िापसी की ओर और प्रचालक या अन्य कमषचारी के सामान्य कायष स्िान के एक मीटर के अन्दर रखा जाएगा,
परंतु उसके पीछे नहीं, भजसका संपकष उसके कायष समूह म ें अभधकतम माना जाता ह।ै
(5) स्िैभतक या व्यभक्तगत नमूने के पररर्ामों के आधार पर, श्रभमकों की भिभिन्न श्रेभर्यों के भलए प्रभतभनभध
धूल जोभखम प्रोफाइल का अनुमान चयभनत श्रभमकों की "पोटषल से पोटषल भनगरानी" द्वारा लगाया जाएगा,
भजनके जोभखम को उनके कायष समूहों का प्रभतभनभध माना जाता ह।ै118 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) नमूने ऐसे व्यभक्त द्वारा भलए जाएंगे भजसे नमनू ा लेन े िाले उपकरर्ों और सहायक उपकरर्ों के संबंध में
इस प्रयोजन के भलए भिशेर् रूप स े प्रभशभित ककया गया हो, भजनकी सही रख-रखाि और कुशल संचालन
सुभनभित करने के भलए जांच की गई हो तिा भजनकी जाचं , परीिर् और अंशांकन एक िर्ष से पहले की तारीख
पर न ककया गया हो:
(7) नमूनों में श्वसनीय धूल की मात्रा तिा कायषस्िल से एकभत्रत नमूनों के मामले में भसभलका की मात्रा का
भनधाषरर् मुख्य भनरीिक-सह-सुभिधाप्रदाता द्वारा इस संबधं में अनुमोकदत प्रयोगशाला में ककया जाएगा।
(8) हिा में मौजूद सांस लेने लायक धूल के मापों के सिी नतीजे और अन्य सिी संबंभधत ब्यौरे नमूनों के
संिह की भतभि से चौदह कदनों के अंदर इस प्रयोजन के भलए रखी गई भजल्दबंद पृष्ठ िाली पुभस्तका में या
पुनप्राषभप्त योग्य तिा संपादन-असंपादन योग्य इलेक्ट्रॉभनक रूप में व्यिभस्ित रूप से दज ष ककए जाएंगे और पूिोक्त
पुभस्तका में प्रत्येक प्रभिभष्ट प्रबंधक द्वारा चौबीस घंटे के अदं र प्रभतहस्तािररत या ई-हस्तािररत की जाएगी और
कदनांक िाला जाएगा।
(9) जब धूल भनगरानी के पररर्ामों से यह स्िाभपत हो जाए कक ककसी स्िान पर धूल की सांद्रता की
अनुमेय सीमा पार हो गई ह,ै तो धूल के उत्सजनष को कम करन े के भलए तत्काल कदम उठाए जाएंगे और िेत्रीय
भनरीिक-सह-सुभिधाकताष को सूभचत ककया जाएगा।
(10) यकद अगले महीने के दौरान सात क्रभमक सामान्य कायकष ारी पाररयों में भलए गए पांच नमूनों की
श्रृंखला में श्वसनीय धूल की औसत सांद्रता “अनुमेय सीमाओं” से िेढ गुना से अभधक हो जाती ह,ै तो अत्यभधक
धूल पैदा करने िाली संबंभधत कारषिाई या गभतभिभधयां बंद कर दी जाएंगी।
(11) संचालन या संचालनों को तब तक कफर से शुरू नहीं ककया जाएगा या जारी रखने की अनुमभत नहीं दी
जाएगी जब तक कक धूल की रोकिाम और दमन में सुधार नहीं ककए जात े ह ैं और उक्त संचालन या संचालनों के
कफर स े शुरू होन े पर तुरंत ककए गए नए नमनू े स े यह स्िाभपत नहीं हो जाता ह ै कक ऐस े सुधारों स े धूल की
सांद्रता स्िीकायष सीमा से कम हो गई ह:ै
बशते कक अगर ककसी मशीनरी या इकक्वपमेंट का धूल रोकने और दबाने िाला भििाइस ठीक से काम न
करे, तो उस मशीनरी या इकक्वपमेंट का ऑपरेशन िी बंद हो जाएगा और तब तक कफर से शुरू नहीं ककया
जाएगा जब तक उसमें खराबी ठीक नहीं हो जाती:
यह िी कहा गया ह ै कक, भसफ़ष एक इमरजेंसी उपाय के तौर पर या काम की ऐसी भस्िभत में सुरिा के
दसू रे तरीके के तौर पर, जहाँ सांस लेन े लायक धूल की मात्रा को तय भलभमट स े कम करना तकनीकी रूप स े
मुमककन न हो, या ककसी भििाइस को लगाने और चालू करने या धूल रोकने या दबाने के भलए कोई नया काम
शुरू करने के भलए ज़रूरी समय के दौरान, धूल की तय भलभमट का पालन ररमोट ऑपरेशन या जॉब रोटेशन स े
ककया जा सकता ह,ै और ऐसा न होने पर सही िस्ट रेभस्परेटर का इस्तेमाल करके।
(12) हर उस खदान का माभलक, अभिकताष या मैनेजर, जहाँ िस्ट रेभस्परेटर की ज़रूरत पड़ सकती ह,ै िहा ँ
काम करने िाल े लोगों को उनके इस्तेमाल के भलए काफ़ी संख्या में और भबना ककसी खचष के िस्ट रेभस्परेटर देगा;
िस्ट रेभस्परेटर की रेगुलर सफ़ाई, भिसइंफ़ेक्ट और अच्छे से काम करने की हालत में बनाए रखना, और उनकी
सही कफटटंग और काम करन े िाले मज़दरू ों को रेभस्परेटर की ज़रूरत और सही इस्तेमाल के बारे में पूरी ट्रेडनंग
देना।
(13) धूल के उड़न,े उसके जमा होने तिा हिा में उड़न े िाली धूल के फैलाि को रोकने के भलए भनम्नभलभखत
प्रािधान लागू होंगे, अिाषत्:-
(क) धूल को उसके भनमाषर् के स्रोत के भजतना संिि हो सके भनकट दबा कदया जाएगा;
(ख) सतह पर या िूभमगत भिडलंग या बोटरंग के ककसी िी काय ष के दौरान,-
(i) धूल का बनना कम करने के भलए नुकीले और सही आकार के भबट्स का इस्तेमाल ककया
जाएगा, भबट्स पर सही दबाि रखा जाएगा और छेदों को कटटंग से साफ़ रखा जाएगा; और[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 119
(ii) प्राकृभतक रूप से गीली जमीन को छोड़कर, कटटंग को गीला करने के भलए पानी की एक
धार कटटंग एज पर भनदेभशत की जाएगी या मुख्य भनरीिक-सह-सुभिधाकता ष द्वारा
अनुमोकदत अन्य समान रूप से कुशल उपकरर् प्रदान ककया जाएगा और िातािरर् को धूल
से िरने से रोकने के भलए भिडलंग या बोटरंग ऑपरेशन के दौरान इसे चालू रखा जाएगा
और जहां िायिीय भिडलंग की जाती ह,ै भिल में संपीभड़त हिा को चालू करने से पहल े
पानी चालू ककया जाएगा:
बशते कक जहां भिडलंग हाि से की जाती ह,ै यह पयाषप्त होगा यकद ऐसी भिडलंग के दौरान भछद्रों को
लगातार नम रखा जाए;
(ग) सतह पर या जमीन के नीचे प्रत्येक सड़क, जहां मोबाइल खनन मशीनें चलती ह,ैं को
भनयभमत रूप से गीला ककया जाएगा और/या उसका ककसी अन्य समान रूप से कुशल
धूल दमनकारी अभिकताष के साि प्रिािी ढंग से उपचार ककया जाएगा, ताकक
िातािरर् में उठने िाली धलू को न्यूनतम ककया जा सके;
(घ) खभनजों की छनन या छंटाई के भलए कोई संयंत्र नहीं और जहां तक संिि हो, राख,
सीमेंट, रेत, मोटाषर या अन्य सूखी एिं बारीक सामिी का कोई ढेर नीच े की ओर बन े
शाफ्ट या प्रिेश िायुमागष के शीर्ष के अस्सी मीटर के िीतर नहीं रखा जाएगा और न ही
ऐसी ककसी सामिी को इस तरह स े संिाला जाएगा कक िह हिा में उड़ जाए और ऐसे
शाफ्ट या ऐसे िायुमागष में खींची जाए;
(ङ) प्रत्येक िूभमगत कायष में,-
(i) ककसी िी मशीनरी या उपकरर् को, भजसस े स्िीकाय ष सीमा स े अभधक धूल उत्सर्जषत होन े
की संिािना हो, तब तक नहीं चलाया जाएगा, जब तक उसमें उपयुक्त धूल भनिारर् तिा
दमन उपकरर् न लगा हो, जो संचालन लीिर या भस्िच के साि उभचत रूप से इंटरलॉक
ककया गया हो, और जब तक ऐसा उपकरर् दितापूिषक सचं ालन नहीं कर रहा हो;
(ii) प्रत्येक यांभत्रक पत्िर कटर पर भपक्स की भिजाइन, व्यिस्िा, सामिी और भस्िभत ऐसी
होगी कक धूल का भनमाषर् न्यूनतम हो और कोई यांभत्रक पत्िर कटर तब तक संचाभलत नहीं
ककया जाएगा जब तक कक उसके काटन े िाले ककनारों पर उपयुक्त पानी के स्प्रे या पानी के
जेट भनदेभशत न ककए जाएं ताकक कटटंग बनत े समय िे नम हो जाएं;
(iii) प्रत्येक कायषरत सतह तिा उसके साठ मीटर के िीतर प्रत्येक सड़क या िायुमागष के फशष,
छत तिा ककनारों को, जब तक कक पूरी तरह से प्राकृभतक रूप से गीला न हो, धूल के जमाि
को रोकन े के भलए भनयभमत रूप स े धोया जाएगा तिा कायष पाली के दौरान पूरी तरह स े
गीला रखा जाएगा;
(iv) ककसी मशीनरी या संचालन द्वारा उत्सर्जतष धूल को दरू करने और धूल की सांद्रता को
'अनुमेय सीमा' स े नीच े लाने के भलए पयाषप्त िाय ु प्रिाह को सामान्य िेंरटलेशन के माध्यम स े
और यकद आिश्यक हो, तो स्िानीय िेंरटलेशन द्वारा बनाए रखा जाएगा, हालांकक, जहा ं
तक व्यािहाररक हो, ककसी िी सड़क या कायषस्िल में िायु का िेग ऐसा नहीं होगा कक
िातािरर् में धूल उठे;
(v) भिस्फोट के बाद कोई िी व्यभक्त कायष स्िल में तब तक प्रिेश नहीं करेगा जब तक धूल, धुआं
और धुएं को हिा के प्रिाह स े साफ करने के भलए पयाषप्त समय न बीत चकु ा हो और टूटी हुई
सामिी को तब तक नहीं हटाया जाएगा जब तक कक उसे पानी स े पूरी तरह गीला न कर
कदया गया हो;120 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(vi) भमनरल, ओर या िेस्ट के पररिहन के भलए इस्तेमाल होने िाली गाभड़यों, टब और कन्िेयर
को अच्छी कंिीशन में रखा जाएगा ताकक कम स े कम भस्पलेज या लीकेज हो और च्यूट,
स्पाइरल कन्िेयर, भबन, रटपलर, कन्िेयर भिस्चाजष पॉइंट और भस्कप लोडिंग और
अनलोडिंग इंस्टॉलेशन को इस तरह कंट्रोल ककया जाएगा कक धूल कम से कम बने; और ऐस े
मटीररयल को पानी से पूरी तरह गीला िी रखा जाएगा, जब तक कक िह पहले से गीला न
हो या धूल रोकन े के दसू रे असरदार तरीके इस्तेमाल न ककए जा रह े हों; और
(vii) जब तक कक भिशेर् करठनाइयों के कारर् िेत्रीय भनरीिक-सह-सुभिधाकताष द्वारा भलभखत
रूप में उस संबंध म ें छूट न दी जाए और ऐसी शतों के अधीन, जैसा कक उसमें भनर्दषष्ट ककया
जा सकता ह ै , पयाषप्त मात्रा में और पयाषप्त दबाि में और ककसी िी पंडपंग प्रर्ाली से स्ितंत्र
रूप से पाइपों में पानी उपलब्ध कराया जाएगा और बनाए रखा जाएगा ताकक धूल को दरू
करने में अभधकतम दिता प्राप्त हो सके;
(च) खभनज या अयस्क को कुचलने, तोड़ने, भिघरटत करने, िेडसंग करने, छांटने, पीसने,
छानने या छानने की कोई प्रकक्रया या उससे संबंभधत कोई अन्य संचालन ककसी िी
खदान में तब तक नहीं ककया जाएगा जब तक पयाषप्त पानी न कदया जाए या धलू
भनयंत्रर् के अन्य उपयुक्त और प्रिािी उपाय, जैसे कक अलगाि, घेराि, भनकास
िेंरटलेशन और धूल संिह तक भिजाइन, उपलब्ध, रखरखाि और उपयोग न ककए जाएं;
(छ) ज़मीन के नीचे की हिा, भजसमें तय भलभमट स े ज़्यादा धूल हो, उसे अच्छे स े पतला
ककया जाएगा और अगर ज़रूरी हो तो कफ़ल्टर ककया जाएगा ताकक उसमें सांस लेने
लायक धूल का कंसंट्रेशन 'मंज़ूर भलभमट' के दस परसेंट से कम हो जाए, और कफर उस े
काम करन े की जगहों पर दोबारा िेजा जाएगा; और
(ज) ककसी मशीनरी, उपकरर् या प्रकक्रया द्वारा उत्पाकदत धलू की रोकिाम और दमन के
भलए और भनकास हिा को कफ़ल्टर करने के भलए इस्तेमाल ककए जाने िाले प्रत्येक
उपकरर् और प्रत्येक धूल श्वसन यंत्र का कम स े कम हर सात कदनों में एक बार भनरीिर्
ककया जाएगा और हर महीने कम से कम एक बार पूरी तरह से जाचं और परीिर्
ककया जाएगा और प्रत्येक ऐसे भनरीिर्, जाचं और परीिर् के पररर्ाम उप-भिभनयम
(8) के तहत बनाए गए रभजस्टर में दजष ककए जाएंगे।
(14) प्रत्येक एस्बेस्टस खदान का माभलक, अभिकताष या प्रबंधक, जहा ं खनन कायष ककया जाता ह ै और धूल की
सांद्रता की 'अनुमेय सीमा' पार हो गई ह,ै िह िी-
(क) प्रदान करें –
(i) ऐसे कायों में भनयोभजत व्यभक्तयों के उपयोग के भलए अच्छी भस्िभत में पयाषप्त सुरिात्मक
कपड़े, भजनके भलए कोई खचष नहीं होगा तिा िैक्यूम क्लीनर के माध्यम से उभचत धूल-झाड़ू
लगाने तिा उनकी भनयभमत धुलाई की व्यिस्िा;
(ii) सुरिात्मक कपड़े पहनने और उतारने के भलए उपयुक्त स्िान;
(iii) अच्छी तरह से बनाए रखा धलु ाई और स्नान स्िान;
(iv) व्यभक्तगत कपड़ों के िंिारर् और बदलने के भलए अलग, साफ और स्िास््यकर स्िान
(ख) (i) एस्बेस्टस फाइबर की छंटाई, पृिक्करर्, िेडिंग, भमश्रर्, संपीड़न और पैककंग तिा कफ़ल्टर
की गई धूल सभहत अपभशष्ट का संिह और भनपटान इस तरह से ककया जाएगा कक एस्बेस्टस
धूल हिा में न भनकल पाए;
(ii) सिी मशीनरी, प्लांट, काम की जगह और भबडल्िंग की सिी अंदरूनी सतहों को, जहा ँ
भमडलंग का काम ककया जाता ह,ै साफ़-सुिरा और एस्बेस्टस िेस्ट से मुक्त रखना होगा। ऐसी[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 121
सफाई िैक्यूम क्लीनर या ककसी सही एग्जॉस्ट िाफ्ट से की जाएगी और ये काम करने िाल े
या िहाँ मौजूद लोगों को सही रेभस्परेटरी इकक्वपमेंट और बचाि िाले कपड़े कदए जाएँगे और
िे उन्ह ें पहनेंगे;
(iii) अिेद्य बैगों में पैक ककए जान े िाले एस्बेस्टस फाइबर;
(iv) सािधानी संबंधी सूचनाएं, ऐसी िार्ा या िार्ाओं में जो अभधकांश काम करने िाले लोग
समझते हों, मानक चते ािनी भचह्न के साि हर ऐसे स्िान पर प्रमुखता से प्रदर्शषत की
जानी चाभहए जहां एस्बेस्टस की भमडलंग की जाती ह ै और जहा ं धूल के संपकष में आने की
'अनुमेय सीमा' पार होन े की संिािना हो, ताकक लोगों को एस्बेस्टस धूल से स्िास््य को
होने िाल े खतरों के बारे में चेतािनी दी जा सके, िहां प्रिेश करन े िाले लोगों द्वारा
सुरिात्मक कपड़ों के उपयोग या उपयुक्त धूल श्वसन के उपयोग की आिश्यकता के बारे म ें
और भसगरेट, बीड़ी, भसगार आकद पीने के खतरों पर सहकक्रयात्मक प्रिाि के बारे में और
एस्बेस्टस धूल के व्यािसाभयक संपकष के बारे में चते ािनी दी जा सके।
(15) प्रत्येक खदान, जहां िायुजभनत धूल उत्पन्न होती ह,ै के प्रबंधक एक योजना तैयार करेंगे और उस े
कक्रयाभन्ित करेंगे भजसमें भनम्नभलभखत का उल्लेख होगा-
(क) नमूना लेन े का स्िान, आिृभत्त, समय, अिभध और पैटनष;
(ख) नमूना लेन े के भलए उपयोग ककये जाने िाल े उपकरर् एिं सहायक उपकरर्;
(ग) प्रयोगशाला भजसमें नमूनों में श्वसनीय धूल की मात्रा तिा भसभलका की मात्रा भनधाषररत की
जाएगी;
(घ) िह प्रारूप भजसमें धूल की सान्द्रता के मापन के पररर्ाम और अन्य भििरर् दजष ककए जाने ह;ैं
(ङ )धूल की मॉभनटटरंग और धूल रोकने और उसे दबाने के उपायों और िस्ट रेभस्परेटर की जांच और
रखरखाि के भलए संगठन; और
(च) धूल भनयंत्रर् उपायों के कायाषन्ियन से संबंभधत सिी व्यभक्तयों को उस संबंध में प्रत्येक द्वारा ककए
जाने िाले काय ष की प्रकृभत से पूरी तरह पररभचत कराने का तरीका।
(16) िेत्रीय भनरीिक-सह-सुभिधाप्रदाता, जहाँ भिशेर् पररभस्िभतयाँ भिद्यमान हों, भलभखत आदेश द्वारा और
उसमें भिभनर्दषष्ट शतों के अधीन रहते हुए, पूिषगामी उपबन्धों में या उप-भनयम (15) के अन्तगषत प्रबंधक की
योजना में कोई पररितनष की अनुमभत दे सकता ह ै या अपेिा कर सकता ह।ै
(17) यकद इस भिभनयमन में भनर्दष्टष ककसी मामले के बारे में कोई संदेह उत्पन्न होता ह,ै तो इसे भनर्षय के भलए
मुख्य भनरीिक-सह-सुभिधाकताष को िजे ा जाएगा , जो अंभतम और बाध्यकारी होगा।
133. गसै भनकलन े स े बचाि। - जहा ँ कोई काम ककसी बंद जगह या बंद पड़े काम के 30 मीटर के अंदर फैला हो,
जहाँ ज्िलनशील या नकु सानदायक गैसें हों या जमा होने की संिािना हो, िहाँ काम शुरू होने से पहले कम स े
कम 1.5 मीटर गहरा एक बोर-होल बनाया जाएगा और बोर होल खोदने का काम ककसी सिम व्यभक्त की
देखरेख में ककया जाएगा, और जहाँ ज्िलनशील गैस मौजूद हो या होने की संिािना हो, िहाँ ऐसे ककसी िी
काम में मंज़ूर सेफ्टी लैंप या टॉचष या भिभजटल गैस भिटेक्टर के अलािा ककसी और लैंप या लाइट का इस्तेमाल
नहीं ककया जाएगा।
134. ररकिरी और खोज का काम। - (1) ककसी खदान में ज्िलनशील गैस का धमाका होने के बाद, भसफ़ष उन्हीं
लोगों को खदान में जाने की इजाज़त होगी भजन्ह ें मैनेजर या सतह पर मौजूद मुख्य अभधकारी न े इजाज़त दी हो।122 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) जब ककसी खदान या उसके िाग को पुनः खोलने का इरादा या प्रस्ताि हो, भजस े आग लगने या स्ितः
गमष होने की भस्िभत म ें अलग कर कदया गया हो, बंद कर कदया गया हो या उसमें पानी िर कदया गया हो, तो
माभलक, अभिकताष या प्रबंधक ऐसे कायष के आरंि होने स े कम से कम तीस कदन पहले ऐसे इरादे या प्रस्ताि की
भलभखत सूचना िेत्रीय भनरीिक-सह-सुभिधाकताष और मुख्य भनरीिक-सह-सुभिधाकताष को देगा।
(3) जहां ककसी खदान या िूभमगत िाग में, जहा ं श्वसनीय िायुमण्िल होने की संिािना ह,ै कोई अन्िेर्र्
कायष करने का इरादा हो,-
(क) समस्त कायष केिल बचाि किर के अन्तगषत ही ककये जायगें े;
(ख) तीन से कम लोगों के ककसी िी िुप को ऐसा काम करन े की इजाज़त नहीं दी जाएगी; और
(ग) ऐसे प्रत्येक दल के पास काबनष मोनोऑक्साइि गैस का पता लगाने के भलए मुख्य भनरीिक-सह-
सुभिधाकताष द्वारा अनुमोकदत एक उपयुक्त उपकरर् तिा एक अनुमोकदत ज्िाला सरु िा लैंप िी
होगा।
135. सतही जल स े खतरा।- (1) जहां कोई खान या उसका िाग इस प्रकार भस्ित हो कक खान या िाग में
सतही जल के प्रिेश का खतरा हो, िहां ऐसे प्रिेश के भिरुि पयाषप्त सुरिा प्रदान की जाएगी और उसे बनाए
रखा जाएगा और ऐसी सुरिा पयाषप्त ह ै या नहीं इसका भनधाषरर् मुख्य भनरीिक -सह-सुभिधाकताष द्वारा ककया
जाएगा , भजसका भनर्षय अंभतम होगा।
(2) मुख्य भनरीिक -सह-सुभिधाकताष की भलभखत में पूिष अनमु भत के भसिाय और ऐसी शतों के अधीन जो
उसमें भनर्दषष्ट की जा सकती ह ैं और उप-भिभनयम (1) के प्रािधानों के अधीन, ककसी खदान में प्रत्येक प्रिेश द्वार
को इस तरह से भिजाइन, भनर्मषत और बनाए रखा जाएगा कक उसका सबसे भनचला डबंद ु (भजसका अिष ह ै िह
डबंद ु जहां से सतह पर बढता पानी खदान में प्रिेश कर सकता ह)ै उस डबंद ु पर उच्चतम बाढ के स्तर से 1.5
मीटर से कम नहीं होगा।
(3) हर साल, बाररश के दौरान खदान की सतह पर बाढ के लेिल पर लगातार नज़र रखी जाएगी और
अगर ककसी िी समय लेिल पहले दजष ककए गए सबसे ऊंचे लेिल को पार कर जाता ह,ै तो ऐसे लेिल को पानी
के ककनारों पर पक्के पोस्ट लगाकर भनशान लगा कदए जाएंगे और इस तरह देखे गए नए सबसे ऊंचे लेिल को,
असली सिे के ज़ररए प्लान पर सबसे ऊंचे बाढ लेिल की तारीख के साि दजष ककया जाएगा:
बशते कक सबसे ऊंच े बाढ लेिल को इंटरपोलेशन से प्लान पर प्लॉट नहीं ककया जाएगा।
(4) यकद खदान के ऊपर की ओर नकदयों तिा जलमागों पर जल बाँध अििा जलाशय भनर्मषत ह,ैं तो बाँधों
से छोड़े जाने िाल े पानी की मात्रा तिा समय का पता लगाने के उद्देश्य से उपयुक्त अभधकाररयों के बीच संचार
की व्यिस्िा की जाएगी, भजससे खदान की सुरिा को खतरा होने की संिािना ह ै तिा जब ऊपर की ओर जल
स्तर बढता ह,ै भजससे ककसी खदान को खतरा होने की संिािना ह,ै तब िी इसी प्रकार के संचार की व्यिस्िा
की जाएगी।
(5) प्रत्यके खदान म,ें भजस े सतही जल स े खतरा होन े की सिं ािना ह,ै उच्चतम बाढ स्तर और कम स े कम 1.2
मीटर या ित्रे ीय भनरीिक -सह-सुभिधाकताष द्वारा अपेभित उच्चतम बाढ स्तर स े नीच े के खतरे के स्तर को सतह
पर उपयक्तु स्िानों पर स्िायी रूप स े भचभह्नत ककया जाएगा और जब िी ककसी स्िान पर पानी खतरे के स्तर
की ओर बढेगा, सिी व्यभक्तयों को पयाप्तष समय पहल े खदान स े िापस ल े भलया जाएगा और इस प्रयोजन के
भलए प्रिािी प्रर्ाभलयों द्वारा खदान के सिी िागों म ें त्िररत सचं ार की पयाप्तष व्यिस्िा की जाएगी और उस े
बनाए रखा जाएगा।
(6) ककसी िी खदान म ें भनम्नतल स े ऊध्ितष ल कोई काय ष नहीं ककया जाएगा-
(क) ककसी नदी, नहर, झील, तालाब या अन्य सतही जलाशय का कोई िाग; या[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 123
(ख) ककसी नदी या नहर के तट स े या ककसी झील, टैंक या अन्य सतही जलाशय की सीमा स े 15
मीटर की िभै तज दरू ी के िीतर भस्ित कोई िी स्िान;
मख्ु य भनरीिक -सह-सुभिधाकताष की भलभखत पिू ष अनमु भत के भबना और ऐसी शतों के अधीन, जसै ा कक उसम ें
भनर्दषष्ट ककया जा सकता ह ै ।
(7) उप-भनयम (6) के अधीन अनमु भत के भलए प्रत्यके आिदे न के साि योजना और खण्ि की दो प्रभतया ं
सलं ि की जाएगं ी, भजसम ें खदान के कायकष लापों की भिद्यमान भस्िभत, कायकष लापों का प्रस्ताभित लआे उट, सतह
स े कायकष लापों की गहराई, पड़ोस म ें प्रत्यके सीम म ें ककसी िी गोि की भस्िभत और गहराई, सिी दोर्, िाइक
और अन्य िगू िीय गड़बड़ी और ऐस े अन्य भििरर् दशाएष जाएगं े जो खदान या उसम ें कायरष त व्यभक्तयों की
सरु िा को प्रिाभित कर सकत े ह।ैं
स्पष्टीकरर्. – जहा ं नदी, नहर, झील, टैंक या जलाशय के माग ष म ें रेत या जलोढ भमट्टी पड़ी हो, िहा ं सतह स े
गहराई की गर्ना ऐसी रेत या जलोढ भमट्टी के नीच े की कठोर जमीन की सतह स े की जाएगी।
(8) उप-भिभनयम (6) के अन्तगतष ककय े जान े िाल े सिी कायों को िभू म के नीच े स्पष्ट रूप स े भचभन्हत ककया
जायगे ा।
(9) एक सिम व्यभक्त बरसात के मौसम म ें हर चौदह कदन म ें कम स े कम एक बार और िर् ष की अन्य अिभध
के दौरान हर तीस कदन म ें कम स े कम एक बार उप-भनयम (1), (2), (3), (4) और (5) के तहत प्रदान ककए गए
प्रत्यके सरु िात्मक उपाय की, चाह े उपयोग म ें हो या नहीं, उनकी भस्िरता के भलए जाचं करेगा और प्रत्यके ऐसी
जाचं की एक ररपोटष उद्दश्े य के भलए रखी गई एक सभजल्द पष्ठृ िाली पस्ु तक या पुनप्राषभप्त योग्य और गरै -संपादन
योग्य इलेक्ट्रॉभनक रूप में दजष की जाएगी , भजस े जाचं करन े िाल े व्यभक्त द्वारा हस्तािररत या ई-हस्तािररत
और कदनांककत ककया जाएगा और प्रबधं क द्वारा प्रभतहस्तािररत या ई-हस्तािररत और कदनाकं कत ककया
जाएगा।
(10) प्रबधं क द्वारा प्रत्यके भतमाही म ें कम स े कम एक बार सरु िात्मक उपायों तिा कायप्रष र्ाली का भनरीिर्
िी व्यभक्तगत रूप स े ककया जाएगा।
136. ज़मीन के नीच े पानी िरन े स े खतरा। - (1) हर खदान में पानी या दसू रे भलकक्वि पदािष या ककसी िी ऐस े
मटीररयल को रोकने के भलए सही इंतज़ाम ककया जाएगा , भजसके गीले होने पर बहने की संिािना हो। उसी
खदान या आस-पास की खदान के कामकाज से।
(2) कोई िी कायष जो ककसी अप्रयुक्त अििा पररत्यक्त कायष (ऐसे कायष को छोड़कर भजसकी िौभतक जांच की जा
चुकी ह ै और भजसमें पानी अििा अन्य तरल पदािष अििा ऐसी कोई सामिी जमा नहीं पाई गई ह ै भजसके गीले
होने पर बहने की संिािना हो ) के 60 मीटर के दायरे में आता ह,ै चाह े िह उसी खदान में हो अििा
समीपिती खदान में, मुख्य भनरीिक-सह-सुभिधाकताष की भलभखत पूिष अनुमभत के भबना तिा उसमें भिभनर्दषष्ट
शतों के अधीन रहते हुए आग े नहीं बढाया जाएगा:
लेककन अगर ककसी ऐस े काम में पानी का ज़्यादा ररसाि देखा जाता ह ै जो ककसी ऐसे बंद या छोड़े गए
काम के 60 मीटर के अंदर ह,ै लेककन उसके आस-पास नहीं ह,ै तो ऐस े काम को तुरंत रोक कदया जाएगा, और
मुख्य भनरीिक-सह- सुभिधाकताष और रीजनल भनरीिक-सह- सभु िधाकता ष को तरु ंत इस बारे म ें बताया
जाएगा। मुख्य भनरीिक-सह- सुभिधाकताष की पहल े स े भलखी हुई इजाज़त और उसम ें बताई गई शतों के भबना
काम को आगे नहीं बढाया जाएगा।
स्पष्टीकरर्- इस उप-भिभनयमन के प्रयोजनों के भलए, उक्त कायों के बीच की दरू ी का तात्पयष उक्त कायों के बीच
ककसी िी कदशा में मापी गई सबसे छोटी दरू ी से ह,ै चाह े िह िैभतज, ऊध्िाषधर या भतरछी हो।
(3) (क ) उप-भनयम (2) में भनर्दषष्ट ककसी कायष को भिस्ताररत करन े की अनुमभत के भलए प्रत्येक आिेदन के
साि योजना और अनिु ाग की दो प्रभतया ं संलि की जाएंगी, भजसमें उक्त कायष के भनकट भस्ित124 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
कायष के संबंध में ऐस े अप्रयुक्त या पररत्यक्त कायष की रूपरेखा दशाषई गई हो, तिा उक्त कायष के
संबंध में ऐसी अन्य सूचना सलं ि की जाएगी, जो उपलब्ध हो।
(ख) जब तक मुख्य भनरीिक-सह- सुभिधाकताष भलखकर आदेश देकर और उसमें बताई गई शतों के
तहत इजाज़त न दे, तब तक ऐसी कोई िी िर्किंग दो मीटर से ज़्यादा चौड़ी या ऊँची नहीं होगी;
और िर्किंग फेस के सेंटर के पास कम से कम एक बोरहोल बनाए रखा जाएगा, और हर तरफ
काफी फ्लैंक होल होंगे और जहाँ ज़रूरी हो, िर्किंग के ऊपर और नीच,े पाँच मीटर से ज़्यादा के गैप
पर बोरहोल होंगे।
(ग) क्लॉज़ (b) के तहत बताए गए सिी बोर-होल को काम शुरू होने से पहले, काफ़ी दरू ी पर
लगातार मेंटेन ककया जाएगा; और यह दरू ी ककसी िी हालत में तीन मीटर स े कम नहीं होगी।
(घ) इस रेगुलेशन के तहत सािधाभनयां इस मकसद के भलए खास तौर पर ऑिराइज़्ि एक सिम
व्यभक्त की सीधी देखरेख में की जाएंगी।
(4) उप-भिभनयम (3) के खंि (ख), (ग) तिा (घ) में बताई गई सािधाभनयां ककसी अन्य कायष में िी बरती
जाएंगी जहां पानी का िारी ररसाि देखा जाता ह,ै चाह े िह अप्रयुक्त अििा पररत्यक्त कायष के भनकट हो या
नहीं।
137. जानबझू कर बाढ लाना। - (1) जब माभलक, अभिकताष या मैनजे र खदान की सतह से या खदान के ककसी
दसू रे भहस्से से या पास की खदान स े पानी लाकर अपनी खदान के कामकाज के ककसी भहस्से म ें बाढ लान े का
इरादा रखता ह ै या प्रस्ताि रखता ह,ै तो उस े ऐस े इरादे या प्रस्ताि के बारे में मुख्य भनरीिक-सह- सुभिधाकता ष
और रीजनल भनरीिक-सह- सुभिधाकताष को और आस-पास की सिी खदानों और ऐसी दसू री खदानों के
मैनेजमेंट को, जो ऐसी बाढ से प्रिाभित हो सकती ह,ैं कम से कम चौदह कदन पहले भलखकर नोरटस देना होगा:
बशते कक िेत्रीय भनरीिक-सह-सुभिधाप्रदाता भलभखत आदेश द्वारा और उसमें भनर्दषष्ट शतों के अधीन,
चौदह कदनों की उक्त नोरटस अिभध की समाभप्त स े पहले ककसी िी कदन ऐसे कायों को शुरू करन े की अनुमभत दे
सकता ह:ै
यह िी कहा गया ह ै कक रीजनल भनरीिक-सह- सभु िधाकताष , भलखकर आदेश देकर, या तो ऐसे ककसी
ऑपरेशन पर रोक लगा सकता ह ै या यह कह सकता ह ै कक ऐसा ऑपरेशन तब तक शुरू न ककया जाए, जब तक
उसमें बताई गई सािधाभनया ं उसकी सतं ुभष्ट के भलए न बरती जाएं।
(2) यकद ऐसे कायों के सम्बन्ध में अभधसूचना जारी की गई ह ै उप-भनयम (1) के अधीन दी गई सूचना,
चौदह कदन की नोरटस अिभध की समाभप्त से साठ कदन के अन्दर आरंि नहीं होती ह,ै तो नोरटस समाप्त माना
जाएगा और उप-भनयम (1) के प्रािधान लागू होंगे मानो ऐसी कोई सूचना ही नहीं दी गई िी।
138. तालाब, पानी का बाधं , िगरै ह बनाना - (1) जहाँ ककसी खदान में, पानी या दसू री चीज़ का दबाि झेलन े
के भलए तालाब, बांध या कोई और स्ट्रक्चर बनान े का इरादा हो, जो गीला होने पर बहगे ा, या पानी के अंदर
आने को कंट्रोल करने के भलए हो, तो माभलक, अभिकताष या मैनेजर ऐसे इरादे की कम से कम चौदह कदन पहल े
भलखकर िेत्रीय भनरीिक सह सुभिधाकताष को नोरटस दगे ा, भजसके साि प्लान और सेक्शन की दो कॉपी होंगी,
भजनमें प्रस्ताभित कंस्ट्रक्शन का भिज़ाइन और दसू री भिटेल्स कदखाई गई हों:
बशते कक जहां खदान या उसमें काम करने िाले लोगों की सुरिा को गंिीर खतरा हो, िहा ं इस भनयम
के भनयमों का पालन ककया गया माना जाएगा, अगर कंस्ट्रक्शन का काम शुरू होते ही रीजनल भनरीिक-सह-
सुभिधाकताष को यह सूचना दे दी जाए।
(2) िेत्रीय भनरीिक-सह-सुभिधाप्रदाता भलभखत आदेश द्वारा ककसी ऐसे जलाशय, बाँध या संरचना के
भिजाइन में ऐसे संशोधन या पररितषन की अपेिा कर सकेगा , जैसा कक उसमें भिभनर्दषष्ट ककया जाए।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 125
अध्याय- XI
िरें टलशे न
139. िरें टलशे न का स्टैंिि।ष - (1) हर खदान के माभलक, अभिकता ष या मनै जे र की यह ड्यटू ी होगी कक िह
खदान के नीच े के सिी भहस्सों म,ें जो सील नहीं ह,ैं लगातार ज़रूरी िरें टलशे न दने े के भलए ज़रूरी कदम उठाए,
ताकक धआु ,ं िाप और धलू हट जाए, ज्िलनशील या नकु सानदायक गसै ों को पतला ककया जा सके ताकक ि े
नकु सान न पहुचं ाए,ं काफ़ी ऑक्सीजन िाली हिा दी जा सके और तापमान या नमी में ऐसी बहुत ज़्यादा
बढोतरी को रोका जा सके जो लोगों की सहे त के भलए नकु सानदायक हो सकती ह।ै
(2) उप-भिभनयम (1) म ें भनर्दष्टष पयाप्तष िायसु चं ार सभु नभित करन े के प्रयोजन के भलए, माभलक, अभिकता ष
और प्रबधं क यह सभु नभित करेंग े कक-
(क) खदान म ें प्रत्यके स्िान पर जहा ं व्यभक्तयों को काय ष करन े या गजु रन े की आिश्यकता होती ह,ै िहा ं
की हिा म ें 19 प्रभतशत स े कम ऑक्सीजन या 0.5 प्रभतशत स े अभधक काबनष िाईऑक्साइि या
कोई ऐसी हाभनकारक गसै नहीं होनी चाभहए भजसस े ककसी व्यभक्त के स्िास््य पर प्रिाि पड़न े की
सिं ािना हो;
(ख) ककसी िी िरें टलेशन भजल े की िापसी हिा के सामान्य भनकाय म ें ज्िलनशील गसै का प्रभतशत
0.75 स े अभधक नहीं ह ै और खान म ें ककसी िी स्िान पर 1.25 स े अभधक नहीं ह;ै
(ग) अन्य भिर्लै ी या हाभनकारक गसै ों का प्रभतशत, जो खानों म ें कायरष त व्यभक्तयों के स्िास््य को
प्रिाभित कर सकती ह,ैं मख्ु य भनरीिक-सह-सभु िधाकता ष द्वारा सामान्य आदशे द्वारा भनर्दष्टष सीमा
स े अभधक नहीं होगा।
(घ) ककसी िी काम करन े की जगह पर िटे बल्ब टेम्परेचर 33.5 भििी सटें ीििे स े ज़्यादा नहीं होना
चाभहए, और जहा ँ िटे बल्ब टेम्परेचर 30.5 भििी सटें ीिेि स े ज़्यादा हो, िहा ँ कम स े कम एक
मीटर प्रभत सके ंि की स्पीि स े चलन े िाली हिा स े हिा आने-जान े का इंतज़ाम ककया जाएगा; और
(ङ) इस उप-भिभनयमन के खिं (ए), (बी) और (सी) के प्रािधानों के अनपु ालन को सभु नभित करन े के
भलए, िाय ु के नमनू े और तापमान रीडिगं तीस कदनों म ें कम स े कम एक बार भलए जाएगं े और
पररर्ाम इस उद्दश्े य के भलए रखी गई एक भजल्दबदं पष्ठृ िाली पस्ु तक या पुनप्राषभप्त योग्य और गैर-
संपादन योग्य इलेक्ट्रॉभनक रूप में दजष ककया जाएगा :
बशत े कक ककसी खदान या उसके भहस्स े म,ें जहा ं खास हालात हों, मुख् य भनरीिक सह सभु िधाकता,ष
भलखकर आदशे दके र और उसम ें बताई गई शतों के तहत, ऊपर बताए गए भनयमों स े अलग िरें टलेशन स्कीम
को मज़ं रू ी द े सकता ह:ै
(3) जहा ं िीज़ल इकक्वपमटें का इस्तमे ाल ज़मीन के नीच े ककया जाता ह,ै िहा ं िीज़ल पार्टषकुलेट मैटर (DPM) के
भलए माइनर का पसषनल एक्सपोज़र आठ घंटे के टाइम िेटेि एिरेज (TWA) एयर बोनष कंसंट्रेशन से ज़्यादा नहीं
होना चाभहए, जो हिा में एभलमेंटल काबषन के 100 माइक्रोिाम प्रभत क्यूभबक मीटर (100ECµg/m 3 ) के
बराबर ह।ै DPM का एयरबोनष कंसंट्रेशन 30 भमनट स े ज़्यादा समय तक TWA िैल्यू (यानी 300ECµg/m 3 )
के 3 गुना से ज़्यादा नहीं होना चाभहए और ज़मीन के नीचे की खदान में ककसी िी जगह पर TWA िैल्यू (यानी
500ECµg/m 3 ) के 5 गुना से ज़्यादा किी नहीं होना चाभहए।
यह िी कहा गया ह ै कक ककसी खदान या खदानों के प्रकार के भलए, भजसम ें ऐस े उपकरर्ों का इस्तमे ाल
होता ह ै जो खदान की हिा म ें ज़हरीली गसै ें या पदाि ष छोड़त े ह,ैं जसै े कक िीज़ल स े चलन े िाल े या बटै री स े
चलन े िाल े उपकरर् िगरै ह, तो मख्ु य भनरीिक-सह- सभु िधाकता ष ऊपर कदए गए भनयमों के भहसाब स े
िरें टलशे न के स्टैंिि ष तय कर सकत े ह।ैं126 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) प्रत्यके खान म,ें उप-भिभनयम (2) म ें भनर्दष्टष िरें टलेशन उपयक्तु याभं त्रक िरें टलेटर द्वारा उत्पन्न ककया
जाएगा।
(4) यकद ककसी खदान अििा उसके िाग के सम्बन्ध म ें ित्रे ीय भनरीिक -सह-सुभिधाप्रदाता की राय ह ै कक
िायु-सचं ार पयाप्तष नहीं ह,ै तो िह भलभखत आदशे द्वारा ऐस े याभं त्रक िायु-सचं ारक की स्िापना तिा रख-रखाि
की मागं कर सकता ह,ै जो खदान अििा उसके िाग म ें पयाप्तष िायु-सचं ार उत्पन्न करन े म ें सिम हो।
140. मने मकै ेभनकल िरें टलटे र, उसका िाइि और कफटटंग। - (1) माइन म ें हर मने मकै ेभनकल िरें टलटे र माइन
या उसके भहस्स े म ें सही िरें टलशे न बनान े म ें सिम होगा, और उस े शाफ्ट, इनक्लाइन या भिनज़ के खलु न े स े
सरु भित दरू ी पर सतह पर लगाया जाएगा।
(2) प्रत्यके खदान म,ें भजस पर भिभनयम 153 लाग ू होता ह,ै यकद याभं त्रक िरें टलेटर को चलान े के भलए
भबजली का उपयोग ककया जाता ह,ै तो िरें टलटे र के िाइि मोटर को भिद्यतु ऊजा ष एक अलग और स्ितत्रं भबजली
उत्पादन स्रोत के माध्यम स े आपर्ू त ष की जाएगी।
(3) प्रत्येक मुख्य यांभत्रक िेंरटलेटर पर भिकभसत दबाि, िेंरटलेटर की गभत और मोटर तापमान को लगातार
दजष करन े के भलए ररकॉर्ििंग उपकरर् उपलब्ध कराए जाएंगे और उनका रखरखाि ककया जाएगा।
(4) प्रत्यके मख्ु य याभं त्रक िरें टलटे र को इस प्रकार भिजाइन, स्िाभपत और अनरु भित ककया जाएगा कक
आिश्यकता पड़न े पर हिा के प्रिाह को उलटा जा सके।
(5) प्रत्येक शाफ्ट पर, जहां सामान्यतः व्यभक्तयों या सामभियों को ऊपर या नीचे उतारने के भलए उपयोग
ककया जाता ह,ै जहां याभं त्रक िेंरटलेटर स्िाभपत ह,ै िहा ं उभचत ढंग से भनर्मषत एयर लॉक प्रदान ककया जाएगा।
(6) प्रत्यके मकै ेभनकल िरें टलटे र को इस प्रयोजन के भलए भनयक्तु एक सिम व्यभक्त के प्रिार म ें रखा जाएगा,
भजस े कोई अन्य अभतररक्त कतव्यष नहीं सौंपा जाएगा भजसके भलए व्यभक्त को फैन हाउस स े बाहर जान े की
आिश्यकता हो या जो मकै ेभनकल िरें टलटे र के प्रिारी के रूप म ें उसके कतव्यष ों म ें हस्तिपे करे।
(7) प्रत्यके खदान म ें भजसम ें याभं त्रक िरें टलटे र उपयोग म ें ह,ै प्रत्यके िरें टलटे टंग भजले में प्रसाररत होने िाली
हिा की मात्रा को कम स े कम हर 30 कदन म ें एक बार मापा जाएगा और इस उद्दश्े य के भलए रखी गई भजल्दबंद
पष्ठृ िाली पस्ु तक म ें या पुनप्राषभप्त योग्य और गैर-संपादन योग्य इलेक्ट्रॉभनक रूप में दज ष ककया जाएगा ।
141. मकै ेभनकल िरें टलटे र का इंस्टॉलेशन और मटें ेनसें । - (1) हर उस माइन म ें भजस पर रेगलु शे न 153 लाग ू
होता ह,ै जहा ँ बस्ू टर या ऑभक्सलरी फैन भबजली स े चलता ह,ै िाइि मोटर को, जब तक कक उस े इस तरह स े
बनाया, इंस्टॉल, ऑपरेट और मटें ेन न ककया गया हो कक खलु ी स्पार्किंग का खतरा न हो, ररटन ष एयरि े म ें नहीं
रखा जाएगा।
(2) प्रत्येक मैकेभनकल िेंरटलेटर और बूस्टर फैन की स्िापना और रखरखाि का पयषिेिर् और भनयंत्रर् इस
प्रयोजन के भलए भनयुक्त सिम व्यभक्त द्वारा ककया जाएगा।
(3) मैकेभनकल िेंरटलेटर और बूस्टर फैन के रखरखाि के भलए भनयुक्त एक सिम व्यभक्त कम से कम हर सात
कदनों में एक बार, उपयोग में प्रत्येक मैकेभनकल िेंरटलेटर और बूस्टर फैन की जाचं करेगा और इस तरह की
जांच के पररर्ामों को इस उद्देश्य के भलए रखी गई एक भजल्दबंद पृष्ठ िाली पुस्तक में या पुनप्राषभप्त योग्य और
गैर-संपादन योग्य इलेक्ट्रॉभनक रूप में ररकॉिष करेगा और ऐसी जाचं स े पता चली ककसी िी खराबी को भबना
दरे ी ककए प्रबधं क के ध्यान म ें लाया जाएगा।
(4) आपातकाल को छोड़कर, कोई िी व्यभक्त प्रबधं क या इस सबं धं म ें भलभखत रूप म ें अभधकृत ककसी
अभधकारी के भलभखत अभधकार के भबना, ककसी िरें टलटे र या बस्ू टर पखं े को चाल ू नहीं करेगा, बदं नहीं करेगा,[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 127
पनु ः चाल ू नहीं करेगा, हटाएगा या ककसी िी तरह स े पररिर्ततष नहीं करेगा, मरम्मत नहीं करेगा या उसम ें
हस्तिपे नहीं करेगा।
(5) उप-भिभनयम (4) के अतं गतष भनर्दष्टष भलभखत प्राभधकारी उन शतों को स्पष्ट रूप स े भनर्दष्टष करेगा भजनके
अतं गतष िरें टलेटर या बस्ू टर पखं े को चाल,ू बदं या पनु ः चाल ू ककया जाएगा, िह अिभध भजसके भलए इस े रोका
जा सकता ह ै तिा ऐस े पखं ों को हटान,े मरम्मत करन,े पररितनष करन े या उनम ें हस्तिपे करन े की प्रकक्रया।
(6) प्रत्यके पररितनष और प्रत्यके ठहराि का भििरर्, भजसम ें भनयत्रं र् स े परे कोई ठहराि िी शाभमल ह,ै
उसकी अिभध सभहत, उप-भनयम (3) के अतं गतष भनयक्तु सिम व्यभक्त द्वारा इस प्रयोजन के भलए रखी गई
भजल्दबंद पष्ठृ ाकं कत पभु स्तका म ें या पुनप्राषभप्त योग्य तिा सपं ादन-अिम इलैक्ट्रॉभनक रूप में दजष ककया जाएगा :
बशत े कक, जब िी कोई मकै ेभनकल िरें टलटे र या बस्ू टर फैन ककसी िी िजह स े बदं हो जाए, तो सिम
व्यभक्त तरु ंत ऊपर बताई गई बकु में या ररट्रीिेबल और नॉन-एभिटेबल इलेक्ट्रॉभनक फॉमष में रुकने का समय
ररकॉिष करेगा और उस े मनै जे र या इस सबं धं म ें ऑिराइज़्ि व्यभक्त को उसके अप्रेज़ल के भलए िजे ेगा और
मैनेजर, या ऑिराइज़्ि व्यभक्त, जैसा िी हो, रुकने के सबं ंध में बाउंि पजे िाली बकु म ें या ररट्रीिेबल और नॉन-
एभिटेबल इलेक्ट्रॉभनक फॉमष में तारीख के साि एट्रं ी पर साइन या ई-साइन करेगा :
आगे यह िी प्रािधान ह ै कक जब मकै ेभनकल िरें टलटे र या बस्ू टर पखं े के बदं होन े की जानकारी प्रबधं क या
इस भनभमत्त अभधकृत व्यभक्त के अलािा ककसी अन्य अभधकारी को दी जाती ह,ै तो उक्त अभधकारी तरु ंत भलभखत
रूप म ें प्रबधं क को या उसकी अनपु भस्िभत म ें इस भनभमत्त अभधकृत ककसी व्यभक्त या प्रबधं क स े िररष्ठ अभधकारी
को ऐसी रुकािट के बारे म ें सभू चत करेगा और प्रबधं क या ऐसा व्यभक्त या िररष्ठ अभधकारी, जसै ा िी मामला हो,
उस े िजे ी गई ऐसी सचू ना की प्राभप्त भलभखत रूप म ें स्िीकार करेगा और भिभनयमन 142 के तहत स्िायी आदशे
पर प्रभतकूल प्रिाि िाल े भबना , ऐसी कारषिाई करेगा जो खदान म ें कायरष त व्यभक्तयों की सरु िा के भलए
समीचीन हो सकती ह ै और इस प्रकार अभधकृत व्यभक्त द्वारा की गई प्रत्यके कारषिाई का भििरर् पिू ोक्त पभु स्तका
या इलेक्ट्रॉभनक रूप में दजष ककया जाएगा ।
(7) उप-भनयम (6) म ें भनर्दष्टष प्रबधं क या अभधकृत व्यभक्त या िररष्ठ अभधकारी, याभं त्रक िटें ीलटे र या बस्ू टर
पखं े के बदं होन े की सचू ना भमलन े पर खदान की भिद्यतु आपर्ू त ष बदं करन े के बारे म ें भनर्यष लगे ा और ऐस े
भियोग की सीमा तिा ऐस े भियोग का ब्यौरा इस प्रयोजन के भलए रखी गई भजल्दबदं पष्ठृ पभु स्तका म ें या
पुनप्राषभप्त योग्य तिा संपादन-अिम इलेक्ट्रॉभनक रूप में दजष ककया जाएगा :
बशत े कक मकै ेभनकल िरें टलटे र या बस्ू टर पखं े के बदं होन े की भस्िभत म,ें ककसी सहायक पखं े की भबजली
की आपर्ू त ष या िाइि का दसू रा स्रोत, यकद स्िाभपत हो, तो अनक्रु म भनयत्रं र् की व्यिस्िा या अन्य प्रिािी
व्यिस्िा द्वारा तरु ंत भिस्कनक्े ट कर कदया जाएगा।
(8) (क) प्रत्यके खदान म ें भजसम ें याभं त्रक िटें ीलटे र उपयोग म ें ह,ै िाय ु की मात्रा, उस खदान के मामल े म ें
भजस पर भिभनयम 153 लाग ू होता ह,ै प्रत्यके चौदह कदन म ें कम स े कम एक बार, तिा अन्य
मामलों म ें प्रत्यके तीस कदन म,ें मापी जाएगी-
(i) हर स्तर या खिं के हर मख्ु य प्रिशे और िापसी िायमु ाग ष म,ें खदान के प्रिशे द्वार के भजतना
सिं ि हो सके भनकट;
(ii) प्रत्यके भििाजन म,ें यिासिं ि उस डबदं ुके भनकट जहा ँ स े भििाजन प्रारंि होता ह;ै
(iii) हर िरें टलटे टंग भिभस्ट्रक्ट में , भजतना हो सके उस पॉइंट के पास जहा ँ हिा एक भस्प्लट के
आभखर म ें सबभििाइि होती ह ै और जहा ँ यह पहली िर्किंग जगह म ें एटं र करती ह;ै और
(iv) कोई अन्य डबदं ु भजस े ित्रे ीय भनरीिक -सह-सुभिधाकता ष भलभखत आदशे द्वारा भनर्दष्टष कर
सकता ह।ै128 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ख) खण्ि (क) म ें भनर्दष्टष मापों को इस प्रयोजन के भलए रखी गई भजल्दबंद पष्ठृ ाकं कत पभु स्तका म ें या
पुनप्राषभप्त योग्य तिा असंपादन योग्य इलैक्ट्रॉभनक रूप में दजष ककया जाएगा ।
(9) उप-भिभनयम (8) म ें भनर्दष्टष माप िी भलए जाएगं े और ररकॉि ष ककए जाएगं ,े जब िी िायु-सचं ार की
प्रर्ाली म ें ऐसा पररितनष ककया जाता ह,ै भजसस े खान के िायु-सचं ार पर काफी हद तक प्रिाि पड़ता ह ै या
पड़न े की सिं ािना होती ह।ै
(10) ऐस े प्रत्यके िरें टलटे र या पखं े का प्रिार इस प्रयोजन के भलए भनयक्तु एक सिम व्यभक्त के पास होगा,
भजस े कोई अन्य अभतररक्त कतव्यष नहीं सौंपा जाएगा, जो िरें टलटे र या पखं े के प्रिारी के रूप म ें उसके कतव्यष ों म ें
हस्तिपे करता हो, जसै ा िी मामला हो।
142. स्टैंडिगं आदशे । - (1) हर उस खदान का मैनेजर भजसमें सहायक पंखे के अलािा कोई दसू रा मैकेभनकल
िेंरटलेटर लगा ह,ै इंस्टॉलेशन के तीस कदन के अंदर रीजनल भनरीिक-सह- सुभिधाकताष को स्टैंडिंग आदेश
देगा, भजसमें िेंरटलेटर के बंद होन े की भस्िभत में खदान या उसके ककसी भहस्से से लोगों को हटान े के संबंध में की
जाने िाली कारषिाई बताई जाएगी।
(2) िेत्रीय भनरीिक-सह-सुभिधाप्रदाता भलभखत आदेश द्वारा उप-भनयम (1) में भनर्दषष्ट स्िायी आदेशों को,
उसको प्रस्तुत प्रपत्र में, ऐसे पररिधषन और पररितषनों के साि, जैसा िह ठीक समझे, अनुमोकदत कर सकेगा और
इस प्रकार अनुमोकदत स्िायी आदेश खदान में लागू होंगे।
(3) खान म ें कायरष त अभधकाशं व्यभक्तयों द्वारा समझी जान े िाली अिं जे ी तिा अन्य स्िानीय िार्ा म ें
स्िायी आदेशों की प्रभतभलभपयाँ खान में ऊपर तिा नीचे, दोनों ही स्िानों पर प्रमुख स्िानों पर प्रदर्शषत की
जाएंगी।
143. भस्प्लट्स और एयरि।े - (1) िेंरटलेशन के मकसद से, हर माइन को इतने भिभस्ट्रक्ट या भस्प्लट्स में बांटा
जाएगा कक यह पक्का हो सके कक हर भिभस्ट्रक्ट या भस्प्लट में ताज़ी हिा का अलग करंट भमलता रह।े
(2) अंतिषहर् िायु की व्यिस्िा इस प्रकार की जाएगी कक िह समस्त भस्िर जल से दरू जाए।
(3) मख्ु य प्रिेश िायमु ाग ष और मख्ु य िापसी िायमु ाग ष के बीच प्रत्यके कनक्े शन म,ें जब तक उसकी
आिश्यकता न हो और उस े सील न कर कदया गया हो, कम स े कम दो दरिाज़ े इस प्रकार स े लगाए जाएगं े कक
जब िी एक दरिाज़ा खोला जाए, तो दसू रा दरिाज़ा बदं रखा जा सके और यह सभु नभित करन े के भलए कदम
उठाए जाएगं े कक कम स े कम एक दरिाज़ा हमशे ा बदं रह:े
बशत े कक ऐसा कोई िी कनक्े शन भजसकी अब ज़रूरत नहीं ह,ै उस े असरदार तरीके स े सील कर कदया
जाएगा।
144. ब्ररै टस, दरिाज,े स्टॉडपगं और एयर क्रॉडसगं । - (1) हर खदान म ें इतनी संख्या में एयर क्रॉडसंग, स्टॉडपंग,
दरिाज़े, ब्रैरटस और दसू रे भििाइस कदए जाएंगे और बनाए रखे जाएंगे, जो रेगुलेशन 139 के भनयम का पालन
पक्का करने के भलए काफ़ी हों।
(2) अगर ऐसे िेंरटलेशन भििाइस के काफ़ी होने के बारे म ें कोई शक हो, तो इसे फ़ैसले के भलए मुख् य
भनरीिक सह सुभिधाकताष टर के पास िेजा जाएगा, जो आभ़िरी होगा।
(3) प्रत्येक संिातन द्वार के फ्रेम तिा छत एिं सड़क के ककनारों के बीच की जगह को भचनाई या कंक्रीट स े
बनाया जाएगा, भजसकी मोटाई कम से कम 25 सेंटीमीटर होगी।
(4) प्रत्येक संिातन द्वार स्ितः बंद होने िाला होगा और जब िी खोला जाएगा, उसे यिाशीघ्र बंद कर कदया
जाएगा और उसे खुला रहने के भलए सहारा या भस्िर नहीं ककया जाएगा।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 129
(5) यकद व्यभक्तयों या सामिी के आिागमन के भलए संिातन द्वार को बार-बार खुला रखना आिश्यक हो, तो
प्रत्येक कायष पाली के दौरान द्वार पर एक द्वार पररचर मौजूद रहगे ा।
बशते कक जहां िेंरटलेशन दरिाज़ा ऑटोमैरटकली ऑपरेट होता ह,ै िहां दरिाज़े पर अटेंिेंट को तैनात नहीं ककया
जाएगा।
(6) यकद कोई दरिाज़ा उपयोग में नहीं ह,ै तो उसे कब्ज़ों से हटा कदया जाएगा और ऐसी भस्िभत में रखा जाएगा
कक िह हिा के प्रिाह में कोई अिरोध पैदा न करे।
(7) मुख्य प्रिेश तिा मुख्य िापसी िायुमागों के बीच प्रत्येक अिरोध भचनाई या ईंट के काम या भबना
सुदढृ ीकरर् के कंक्रीट से भनर्मषत ककया जाएगा, भजसकी मोटाई कम से कम 25 सेंटीमीटर होगी, और यकद
उभचत रूप से सुदढृ ीकरर् कंक्रीट से भनर्मषत ककया गया ह,ै तो कम से कम 15 सटें ीमीटर मोटाई या िेत्रीय
भनरीिक-सह- सुभिधाकताष द्वारा अपेभित अभधक मोटाई का होगा, तिा हिा के ररसाि को रोकने के भलए उस
पर पयाषप्त मोटाई का चूना या सीमेंट प्लास्टर चढाया जाएगा :
बशत े कक भिशर्े पररभस्िभतयों म ें मख्ु य भनरीिक-सह-सभु िधाकता ष ऊपर बताए गए तरीके के अलािा
ककसी अन्य उपयक्तु तरीके स े स्टॉडपगं के भनमार्ष की अनमु भत द े सकता ह।ै
(8) प्रयोग में आने िाले प्रत्येक स्टॉडपंग को भनरीिर् हते ु सुलि रखा जाएगा।
(9) प्रत्येक एयर-क्रॉडसंग के भििाजन और दीिारें यकद भचनाई या कंक्रीट से भनर्मषत ह,ैं जो ठीक से प्रबभलत
नहीं ह,ैं तो उनकी मोटाई 25 सेंटीमीटर से कम नहीं होगी और यकद िे ठीक से प्रबभलत कंक्रीट से भनर्मषत ह,ैं तो
उनकी मोटाई 15 सेंटीमीटर से कम नहीं होगी।
(10) प्रत्येक एयर-क्रॉडसंग, िेंरटलेशन स्टॉडपंग, दरिाजा या ब्रैरटस को कुशल कायष भस्िभत और अच्छी मरम्मत
में बनाए रखा जाएगा।
(11) एक सिम व्यभक्त कम से कम प्रत्येक तीस कदन म ें एक बार प्रयोग में आने िाले प्रत्येक िायुमागष, िायु
क्रॉडसंग, िायु संचार रोकने िाले प्रत्येक दरिाजे और िायुमागष की जांच करेगा और उसके पररर्ाम को इस
प्रयोजन के भलए रखी गई भजल्दबंद पृष्ठ िाली पुभस्तका म ें या पुनप्राषभप्त योग्य तिा गैर-संपादन योग्य
इलेक्ट्रॉभनक रूप में दजष करेगा और उस पर हस्तािर या ई-हस्तािर करेगा और अपने हस्तािर की तारीख
िालेगा।
145. हिा के करंट की िले ोभसटी। - हिा के करंट की िेलोभसटी, भजसे मीटर प्रभत भमनट में मापा जाता ह,ै हिा
के पाइप के फेस स े तरु ंत बाहर िेंरटलेशन कनेक्शन पर और भिस्चाज ष एंि स े 7.5 मीटर की दरू ी पर क्रमशः 30
और 15 से कम नहीं होगी:
बशत े कक, ककसी िी काम करन े की जगह पर कोई िी िीज़ल इकक्वपमटें नहीं चलाया जाएगा, जहा ँ हिा
का िगे 45 मीटर प्रभत भमनट स े कम हो:
आगे यह िी प्रािधान ह ै कक यकद मुख्य भनरीिक-सह-सुभिधाकता ष की राय म ें उपरोक्त प्रािधान का
अनुपालन व्यािहाररक नहीं ह ै या आिश्यक नहीं ह ै तो भलभखत आदेश द्वारा तिा उसमें भनर्दषष्ट शतों के अधीन
रहते हुए ककसी िी खदान को इस भिभनयमन के प्रािधान से आंभशक या पूर्ष रूप से छूट दी जाएगी।
146. सहायक पखं .े - (1) प्रत्येक सहायक पंखा-
a) इस प्रकार से स्िाभपत, अिभस्ित और संचाभलत ककया जाएगा कक –
(i) हर समय इसमें काफ़ी मात्रा में हिा पहुचँ नी चाभहए ताकक यह पक्का हो सके कक यह हिा
को दोबारा सकुषलेट न करे; और130 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ii) इसमें प्रसाररत होन े िाली हिा के ककसी िी ज्िलनशील या हाभनकारक गैसों या धलू की
पयाषप्त मात्रा से दभू र्त होने का कोई खतरा नहीं ह;ै
b) चाह े भबजली स े चल े या ककसी और तरह स,े उस े धरती स े अच्छे स े जोड़ा जाएगा ताकक
इलेक्ट्रोस्टैरटक चाज ष जमा न हो; और
c) हिा को सामन े या ब्लाइंि एिं तक ल े जान े के भलए एक एयर-िक्ट होगा, भजस े इस तरह स े मटें ेन
ककया जाएगा कक हिा का लीकेज कम स े कम हो और सामन े या ब्लाइंि एंि के 4.5 मीटर के अंदर
हिा की काफ़ी सप्लाई हो।
(2) ककसी िी सहायक पंखे को ककसी अभधकारी द्वारा या उसके प्राभधकार के भबना चालू नहीं ककया जाएगा,
बंद नहीं ककया जाएगा, हटाया नहीं जाएगा, प्रभतस्िाभपत नहीं ककया जाएगा या ककसी िी प्रकार पररिर्ततष
नहीं ककया जाएगा या उसमें हस्तिेप नहीं ककया जाएगा।
(3) कोई िी व्यभक्त ऐसे ककसी स्िान में प्रिेश नहीं करेगा या नहीं रहगे ा जो िायुसंचार के भलए सहायक
पंखे पर भनिषर ह,ै जब तक कक ऐसा पंखा प्रिािी ढंग से काम नहीं कर रहा हो:
बशते कक जब िी ककसी ऐसी जगह का िेंरटलेशन रुक जाए, चाह े पंखे के बंद होने से या ककसी और िजह
से, तो कोई िी व्यभक्त िेंरटलशे न ठीक करन े के मकसद के अलािा, उसमें तब तक नहीं जाएगा या नहीं रहगे ा,
जब तक कक उस जगह की ककसी सिम व्यभक्त ने जाचं न कर ली हो और उसे सरु भित घोभर्त न कर कदया हो।
(4) प्रत्येक िूभमगत कायष म ें एक ही िायुसंचार भजल े या भस्प्लट में दो या दो स े अभधक सहायक पंखों की
स्िापना के भलए शतों को मख्ु य भनरीिक-सह-सुभिधाकताष द्वारा सामान्य आदेश में भनर्दषष्ट ककया जाएगा।
147. सिं ातन उपकरर्ों म ें आग स े बचाि के उपाय।- (1) सतह पर भस्ित प्रत्यके याभं त्रक सिं ातन उपयक्तु
अभिरोधक आिास म ें स्िाभपत ककया जाएगा।
(2) सिं ातन प्रयोजनों के भलए सीलबंद या ढके हुए प्रत्यके शाफ्ट का आिरर्, प्रत्यके पखं े का भिफ्ट, िक्ट
या आिरर् और ऐस े भिफ्ट, िक्ट या आिरर् के िीतर एक याभं त्रक सिं ातन या पखं े का प्रत्यके िाग, और
प्रत्यके िाय-ु क्रॉडसगं और सिं ातन द्वार अभिरोधी सामिी स े भनर्मतष ककया जाएगा:
बशत े कक यह भनयम रस्सी कैपले द्वारा सचं ाभलत शाफ्ट-किटरंग के छोटे ढक्कन पर लाग ू नहीं होगा।
148. िरें टलशे न प्लान को अप-टू-िटे ककया जाना चाभहए। - मनै जे र यह पक्का करेगा कक जसै े ही ककसी खदान के
िरें टलशे न म ें कोई बदलाि ककया जाता ह,ै भजसम ें एयर-क्रॉडसगं या स्टॉडपगं को बनाना या हटाना या ज़मीन के
नीच े िरें टलटे र या पखं े की जगह में बदलाि या इंस्टॉलशे न शाभमल ह,ै तो जसै ा िी मामला हो, िह बनाना,
हटाना, बदलाि या इंस्टॉलशे न, रेगुलेशन 59 के तहत बनाए गए िेंरटलेशन प्लान पर कदखाया जाएगा।
149. रुकािटें, रुकािटें और बदलाि। - (1) ककसी िी लेिल, िाइि, क्रॉसकट, सड़क या ज़मीन के नीचे के ककसी
िी भहस्से में कोई िी सामान या मलबा जमा नहीं होने कदया जाएगा, भजससे िेंरटलेशन में रुकािट आए।
(2) प्रत्येक सड़क माग ष तिा िूभमगत कायष स्िल, भजसमें पयाषप्त िायु-संचार नहीं ह,ै को बाड़ या बैररकेि
लगाकर घेरा जाएगा, ताकक लोगों को िहां प्रिेश करन े स े प्रिािी ढंग से रोका जा सके।
(3) यकद ककसी व्यभक्त को ककसी खदान या उसके ककसी िाग में ककसी अिरोध, हस्तिेप या िायु-संचार की
कमी के बारे में पता चलता ह,ै तो िह व्यभक्त-
a. अगर ऐसी रुकािट, दखल या कमी को ठीक करना उसके अभधकार में आता ह,ै तो तरु ंत ऐसा करने
के भलए कदम उठाए; या[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 131
b. उस जगह पर सारा काम बदं कर देगा, और ऐसी रुकािट, दखल या कमी के बारे में तुरंत अपने
बड़े अभधकारी को बताएगा।
(4) जब किी ककसी यांभत्रक िेंटीलेटर के रुकने या िूभमगत स्िाभपत सहायक पंखे सभहत िेंटीलेशन में कोई
व्यिधान उत्पन्न होता ह,ै तो खदान या उसके िाग का प्रिारी अभधकारी तुरंत एहभतयाती उपाय करेगा, भजसमें
यकद आिश्यक हो तो व्यभक्तयों को िापस बुलाना िी शाभमल होगा, ताकक भिभनयमन 139 के प्रािधानों का
अनुपालन न करन े से उत्पन्न होन े िाले खतरों से बचा जा सके और खदान या उसके िाग में िेंटीलेशन बहाल
ककया जा सके।
(5) कोई िी व्यभक्त प्रबंधक के भलभखत प्राभधकार के भबना ककसी खदान या उसके िाग में िायु-संचार की
सामान्य व्यिस्िा में पररितनष नहीं करेगा:
बशते कक इमरजेंसी में, खदान का कोई अभधकारी लोगों की सुरिा के भलए ज़रूरी समझे जाने िाल े
बदलाि कर सकता ह,ै लेककन भजतनी जल्दी हो सके, उसे इसके बारे में बड़े अभधकारी और मैनेजर को भलखकर
बताना होगा।
150. िी-िॉटटरंग और दोबारा खोलन े के दौरान गसै स े बचन े के भलए सािधाभनया।ं - (1) ककसी िी बेकार
िर्किंग या शाफ्ट से िी-िॉटटरंग तब तक नहीं की जाएगी जब तक ककसी सिम व्यभक्त की लगातार भनगरानी में
न हो और ऐसी िी-िॉटटरंग के दौरान, ज्िलनशील या नकु सानदायक गसै ों की मौजदू गी का पता लगान े के भलए
भसफ़ष मंज़ूर सफ्े टी लैंप या दसू रे मंज़रू उपकरर् का इस्तमे ाल ककया जाएगा, और हर उस काम की जगह पर
जहां लोग तनै ात ह,ैं कम से कम एक मंज़ूर फ्लेम सेफ्टी लैंप या ज्िलनशील या नकु सानदायक गसै ों की मौजदू गी
या ऑक्सीजन की कमी का पता लगान े के भलए दसू रा मज़ं रू उपकरर् िी कदया जाएगा।
(2) सात कदन स े ज़्यादा समय तक माइडनगं बंद रहन े के बाद दोबारा खोली गई ककसी खदान या उसके ककसी
भहस्स े का और पानी भनकालन े के बाद खदान के ककसी भहस्स े का पहला इंस्पक्े शन, एक सिम व्यभक्त द्वारा एक
मज़ं रू फ्लमे सफ्े टी लपैं या दसू रे मज़ं रू उपकरर् स े ककया जाएगा ताकक ज्िलनशील या नकु सानदायक गसै ों की
मौजदू गी और ऑक्सीजन की कमी का पता लगाया जा सके और ऐस े इंस्पक्े शन के दौरान, मज़ं रू इलभे क्ट्रक टॉच ष
या लपैं के अलािा ककसी और लाइट या लपैं का इस्तमे ाल नहीं ककया जाएगा।
(3) ऐसे प्रत्येक भनरीिर् का पररर्ाम इस प्रयोजन के भलए रखी गई भजल्दबंद पृष्ठांककत पुभस्तका में या
पुनप्राषभप्त योग्य तिा असंपादन योग्य इलैक्ट्रॉभनक प्रारूप में दजष ककया जाएगा, और भनरीिर् करने िाले व्यभक्त
द्वारा उस पर हस्तािर या ई-हस्तािर और कदनांक िाला जाएगा, और प्रबंधक द्वारा उस पर प्रभतहस्तािर या
ई-हस्तािर और कदनांक िाला जाएगा।
151. ज्िलनशील और नकु सानदायक गसै ों स े बचाि। - (1) इस भनयम के भलए, ज्िलनशील गैस तब भमली या
पता चली मानी जाएगी जब इसका संकेत फ्लेम सेफ्टी लैंप की धीमी लौ से भमले या, जहाँ मीिेन भिटेक्टर
इस्तेमाल ककए जाते ह,ैं िे 1.5 प्रभतशत या उससे ज़्यादा ज्िलनशील गैस बताते ह।ैं
(2) जब कोई व्यभक्त ज्िलनशील गैस की उपभस्िभत का पता लगाता ह,ै तो िह उस े न तो झाड़ेगा और न ही
बुझाएगा, बभल्क तुरंत उस स्िान स े हट जाएगा और अपने िररष्ठ अभधकारी को इसके बारे में सूभचत करेगा।
(3) जहा ं ककसी खदान म ें ककसी िी स्िान पर ज्िलनशील या हाभनकारक गसै का पता चलता ह,ै -
(क) सिी व्यभक्तयों को उस स्िान स े हटा कदया जाएगा;
(ख) उस जगह को तरु ंत बदं कर कदया जाएगा ताकक लोग गलती स े उसम ें न घसु सकें, और इंचाज ष
व्यभक्त भबना दरे ककए, िरें टलशे न को बहे तर करके गसै हटान े के भलए कदम उठाएगा।
(4) उप-भनयम (3) के अधीन ऐसी गैस को हटाने के दौरान, ऐसे भनष्कासन के भलए आिश्यक व्यभक्तयों के
अभतररक्त सिी व्यभक्तयों को उस िेंरटलेटटंग भिभस्ट्रक्ट के िापसी पि से बाहर भनकाल कदया जाएगा भजसमें गैस132 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
का पता चला ह,ै जब तक कक सिम व्यभक्तयों की राय में गैस की मात्रा इतनी कम न हो कक ऐसा भनष्कासन
आिश्यक न हो:
बशते कक जहां ज्िलनशील गैस की मौजूदगी से खतरा पैदा होता ह,ै उस िेंरटलेटटंग भिभस्ट्रक्ट में, जहां
गैस का पता चला ह,ै कोई िी नंगी लाइट इस्तेमाल नहीं की जाएगी।
(5) ककसी िी व्यभक्त को उस स्िान पर दोबारा प्रिेश नहीं कदया जाएगा जहां पर गैस का पता चला िा, जब
तक कक कोई अभधकारी उस स्िान की जांच न कर ले और यह ररपोटष न दे दे कक िह स्िान गैस से मुक्त ह।ै
(6) उप-भिभनयम (5) में भनर्दषष्ट प्रत्येक जांच जलते हुए सरु िा लैंप या मुख्य भनरीिक-सह-सुभिधाकता ष
द्वारा अनुमोकदत उपयुक्त भिटेक्टर से की जाएगी और हाभनकारक गैसों के मामले में, मुख्य भनरीिक-सह-
सुभिधाकताष द्वारा अनुमोकदत काबषन मोनोऑक्साइि गैस का पता लगाने के उपयुक्त साधन से िी की जाएगी।
(7) सब-रेगुलेशन (2) में बताई गई हर घटना और सब-रेगुलेशन (5) के तहत की गई हर जांच की
जानकारी, साि ही यह िी बताया जाएगा कक गैस कहा ँ और कब भमली और कब हटाई गई, और ज्िलनशील
गैस के मामले में, उसका प्रभतशत, इस मकसद के भलए रखी गई बाउंि पेज िाली बुक में या ररट्रीिेबल और
नॉन-एभिटेबल इलेक्ट्रॉभनक फॉमष में ररकॉिष ककया जाएगा; और ऐसी हर एंट्री पर ररपोटष बनान े िाले सिम
व्यभक्त साइन या ई-साइन और तारीख िालेंगे, और मैनजे र काउंटरसाइन या ई-साइन और तारीख िालेंगे।
152. गसै के भलए इस्तमे ाल न होन े िाली जगह का इंस्पक्े शन। - (1) खदान के ककसी िी भहस्से में, जहा ँ
रीजनल भनरीिक-सह- सुभिधाकताष भलखकर आदेश दे, सिी इस्तेमाल न होने िाली जगहों को, भजन्ह ें सील
नहीं ककया गया ह,ै हर सात कदन में कम से कम एक बार ककसी सिम व्यभक्त द्वारा ज्िलनशील या
नुकसानदायक गैस की मौजूदगी के भलए इंस्पेक्शन ककया जाएगा।
(2) उप-भनयम (1) में भनर्दषष्ट प्रत्येक भनरीिर् की ररपोटष इस प्रयोजन के भलए रखी गई भजल्दबंद पृष्ठांककत
पुभस्तका में या पुनप्राषभप्त योग्य तिा असंपादन योग्य इलक्ै ट्रॉभनक प्रारूप में दजष की जाएगी और भनरीिर् करन े
िाले व्यभक्त द्वारा उस पर हस्तािर या ई-हस्तािर ककए जाएंगे तिा कदनाकं िाला जाएगा।
153. गसै िाली खदानों म ें सफ्े टी लपैं का इस्तमे ाल। - सट्रें ल इलभे क्ट्रभसटी अिॉररटी (सेफ्टी और इलेभक्ट्रक
सप्लाई से जुड़े उपाय ) रेगुलशे न, 2023 के तहत मंज़रू सफ्े टी लैंप या टॉचष या दसू रे इंस्टॉलेशन के अलािा कोई
िी लैंप या लाइट, ऐसी खदान में ज़मीन के नीच े इस्तेमाल नहीं की जाएगी या इस्तेमाल करने की इजाज़त नहीं
दी जाएगी, जहाँ-
(क) ककसी िी िाग में भजसमें भिस्फोट हुआ हो या ज्िलनशील गैस का प्रज्िलन हुआ हो;
(ख) ककसी िी िेंरटलेटटंग भिभस्ट्रक्ट में जहां ज्िलनशील गैस पाई गई हो; और
(ग) ककसी ऐस े स्िान पर, जहां िेत्रीय भनरीिक-सह-सुभिधाकताष की राय में ज्िलनशील
गैस इतनी मात्रा में मौजूद होने की संिािना ह ै कक खुली रोशनी का उपयोग खतरनाक
हो सकता ह:ै
बशत े कक मुख् य भनरीिक सह सभु िधाकताष , भलखकर आदशे दके र और उसम ें बताई गई शतों के तहत,
ककसी िी खदान या उसके भहस्स े को इस रेगलु शे न के लाग ू होन े स े इस आधार पर छूट द े सकता ह ै कक उसकी
खाभसयत की िजह स े उसम ें सफ्े टी लपैं का इस्तमे ाल ज़रूरी नहीं ह।ै
154. प्रभतबभं धत िस्तएु .ँ - प्रत्येक खान या उसके िाग पर, भजस पर भिभनयम 153 लागू होता ह,ै भनम्नभलभखत
प्रािधान प्रिािी होंगे, अिाषत्:-[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 133
(1) कोई िी व्यभक्त ककसी खदान में अपने कब्ज े में कोई भसगार, भसगरेट, ई-भसगरेट, बीड़ी या अन्य धूम्रपान
उपकरर्, या कोई माभचस या मोबाइल फोन, या ककसी िी प्रकार का अन्य उपकरर् जो प्रकाश, ज्िाला या
डचंगारी पैदा करन े में सिम हो, नहीं रखेगा:
बशते कक इस उप-भनयमन में ककसी िी बात को मुख्य भनरीिक-सह-सुभिधाकताष द्वारा अनुमोकदत प्रकार
के ककसी िी उपकरर् के शॉट-फायटरंग चलाने के प्रयोजन के भलए िूभमगत उपयोग पर प्रभतबंध लगाने िाला
नहीं माना जाएगा।
(2) यह सुभनभित करन े के भलए कक िूभमगत मागष से जान े िाले ककसी व्यभक्त के पास उप-भनयम (1) में
भनर्दषष्ट कोई िस्तु ह ै या नहीं, खदान में प्रिेश करने से ठीक पहले ऐस े प्रत्येक व्यभक्त की तलाशी लेन े के भलए भपट
टॉप अटेंिेंट (यकद कोई हो) के अलािा ककसी सिम व्यभक्त को भनयुक्त ककया जाएगा।
(3) उप-भिभनयम (2) में भनर्दषष्ट सिम व्यभक्त पूरी पारी के दौरान ड्यूटी पर रहगे ा और इस भिभनयमन तिा
भिभनयमन 153 के उप-भिभनयम (2) के अधीन कतषव्यों के अलािा उसे कोई अन्य कतव्यष नहीं सौंपा जाएगा।
(4) इस प्रकार भनयुक्त सिम व्यभक्त उप-भनयम (1) में भनर्दषष्ट िस्तुओं की गहन तलाशी लेगा और भिशेर् रूप से-
(क) सिी जेबों की तलाशी लें या उन्ह ें पलट दें;
(ख) सिी कपड़े एक-दसू रे को सौंप दें; और
(ग) तलाशी भलए जा रह े व्यभक्त के कब्जे में मौजूद ककसी िी िस्तु की जांच करना।
ऐसी तलाशी हर बार तब की जाएगी जब कोई व्यभक्त ज़मीन के नीचे जाएगा, िले ही उस व्यभक्त की पहले िी
ऐसी तलाशी ली गई हो।
(5) यकद सिम व्यभक्त को सदं ेह हो कक भजस व्यभक्त की तलाशी ली जा रही ह,ै िह पूिोक्त कोई िस्त ु भछपा रहा
ह,ै तो िह उस े भहरासत में लगे ा और भजतनी जल्दी हो सके मामले को प्रबंधक या सहायक प्रबंधक को िेजेगा।
(6) उप-भनयम (5) के अन्तगषत संकदग्ध ककसी व्यभक्त को खदान में प्रिेश करने की अनुमभत तब तक नहीं दी
जाएगी, जब तक प्रबंधक या अन्य िररष्ठ अभधकारी इस बात से सतं ुष्ट न हो जाए कक उस व्यभक्त के कब्जे में ऐसी
कोई िस्तु नहीं ह।ै
(7) कोई िी व्यभक्त जो अपनी तलाशी लेने से इंकार करता ह ै या भजसकी तलाशी लेने पर उसके पास पूिोक्त
कोई िस्तु पाई जाती ह,ै िह इस भिभनयमन के भिरुि अपराध का दोर्ी होगा।134 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय – XII
प्रकाश और सरु िा लपैं
155. सफेदी करिाना.- खदान म ें ज़मीन के नीच े नीच े कदए गए जगहों की छत और ककनारों पर सफेदी करिाई
जाएगी, यानी:-
(क) प्रत्यके शाफ्ट इनसटे और शाफ्ट बोटम या साइडिंग और प्रत्यके बाई-पास जो भनयभमत उपयोग
म ें ह;ै
(ख) प्रत्यके ढुलाई भिमान के ऊपर और नीच,े प्रत्यके भनयभमत रुकन े का स्िान, साइडिंग, लडैं िगं ,
पास-बाई और जक्ं शन, चहे रे के 100 मीटर के िीतर को छोड़कर;
(ग) हर यात्रा सड़क;
(घ) हर कमरा और जगह भजसम ें कोई इंजन, मोटर या दसू रा उपकरर् हो; और
(ङ) ज़मीन के नीच े हर फस्टष एि स्टेशन।
156. सामान्य प्रकाश व्यिस्िा.- (1) कायष समय के दौरान पयाषप्त सामान्य प्रकाश व्यिस्िा उपलब्ध कराई
जाएगी -
(क) ऐसी सतह पर जहाँ प्राकृभतक प्रकाश अपयाषप्त हो-
(i) प्रत्येक इंजन हाउस में,
(ii) प्रत्येक कायषरत शाफ्ट के आसपास,
(iii) प्रत्येक खुली खदान में,
(iv) प्रत्येक शंटटंग या माशषडलंग यािष पर,
(v) हर उस जगह पर जहाँ लोगों को काम करना पड़ता ह;ै और
(ख) िूभमगत –
(i) प्रत्येक शाफ्ट इनसेट तिा शाफ्ट तल या लैंडिंग या साइडिंग पर जो भनयभमत उपयोग में ह;ै
(ii) प्रत्येक यात्रा मागष पर, भजसका ककसी पारी के दौरान पचास या इससे अभधक व्यभक्तयों
द्वारा सामान्यतः उपयोग ककया जाता ह:ै
बशते कक इस उप-खंि के प्रािधानों का अनुपालन ककया गया माना जाएगा, जहा ं काम पर प्रत्येक व्यभक्त
को भबजली के लैंप या रोशनी प्रदान की जाती ह;ै
(iii) भनयभमत उपयोग में प्रत्येक स्ि-कक्रयाशील ढलान के ऊपर और नीच;े
(iv) ढुलाई सड़क पर प्रत्येक स्िान पर, जहां पर टब भनयभमत रूप से युभग्मत या अयुभग्मत होत े
ह ैं या ढुलाई रस्सी से जुड़े या अलग होते ह;ैं
(v) प्रत्येक स्िान पर जहाँ पर टब भनयभमत रूप स े यंत्रित् िरे जात े ह;ैं
(vi) प्रत्येक कमरे तिा स्िान पर जहां कोई इंजन, मोटर या अन्य उपकरर् हो;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 135
(vii) हर उस जगह या जगह पर जहां कोई भपलर या ब्लॉक भनकाला जा रहा हो; और
(viii) ज़मीन के नीचे हर फस्टष एि स्टेशन पर:
बशते कक ककसी खदान या उसके भहस्से में, जहाँ रेगुलेशन 153 लागू होता ह,ै या ब्लाइंि एंि िर्किंग में,
जहाँ मैकेभनकल िेंरटलेटर स े िेंरटलेशन नहीं होता ह,ै िहाँ लगाए गए लाइटटंग कफक्स्चर, सेंट्रल इलेभक्ट्रभसटी
अिॉररटी (सेफ्टी और इलेभक्ट्रक सप्लाई से संबंभधत उपाय) रेगुलेशन, 2023 के भनयमों का पालन करेंगे।
(2) खदान में प्रकाश की व्यिस्िा यिासंिि इस प्रकार की जाएगी कक चकाचौंध या आखँ ों पर तनाि न
आए।
(3) जहां खदान म ें भिद्युत ऊजा ष उपलब्ध ह,ै िहा ं उप-भिभनयम (1) के अन्तगषत प्रकाश की व्यिस्िा भिद्युत
माध्यम से की जाएगी।
(4) जहाँ भिद्युत प्रकाश का उपयोग ककया जाता ह,ै िहाँ एक अभतररक्त प्रकाश या लैंप भजसका भिद्यतु आपूर्तष स े
कोई संबंध नहीं हो, लगातार जलता रखा जाएगा-
(क) िूभमगत, प्रत्येक शाफ्ट इनसटे और शाफ्ट तल या भनयभमत उपयोग में लैंडिंग और प्रत्येक इंजन
कि में;
(ख) सतह पर, अंधेरा होने के बाद, हर िर्किंग शाफ्ट के ऊपर और हर इंजन रूम में; और
(ग) यात्रा के दौरान सड़क मागष एिं बचने के रास्तों में।
(5) प्रत्येक भिद्युत लैंप-कफटटंग का भनमाषर् इस प्रकार ककया जाएगा कक उसे आकभस्मक िभत से बचाया जा
सके और शॉट-फायटरंग से लपैं को िभतिस्त होने से बचाने के भलए पयाषप्त सािधाभनयां बरती जाएंगी।
(6) खान में यात्रा पि के साि-साि तिा भनकास मागष पर प्रभतदीप्त या प्रदीप्त पि खोजक या सूचक
उपलब्ध कराए जाएंगे।
157. हर व्यभक्त को लाइट साि रखनी होगी। - माभलक, अभिकताष या मैनेजर, ज़मीन के नीचे काम करने िाल े
हर व्यभक्त को मुफ़्त म ें एक लाइट या लैंप देगा जो उसे अपने काम ठीक से और पूरी तरह से करन े में मदद करे
और ऐसा कोई िी व्यभक्त ऐसी लाइट या लैंप के भबना ज़मीन के नीचे नहीं जाएगा या नहीं रहगे ा:
शतष यह ह ै कक सतह पर लौटने पर, ऐसा हर व्यभक्त, जब तक मैनेजर भलभखत में आम या खास आदेश न
दे, तुरंत अपना लैंप लैंप रूम में िापस कर देगा।
158. लाइटटंग का स्टैंिि।ष - (1) अगर इस बारे में कोई शक हो कक कोई लैंप या लाइट ठीक से काम कर रही ह ै
या नहीं, तो इस े फैसले के भलए मुख्य भनरीिक सह सुभिधाकताष को िेजा जाएगा।
(2) मुख्य भनरीिक-सह-सुभिधाप्रदाता समय-समय पर सामान्य या भिशेर् आदेश द्वारा भनम्नभलभखत
भिभनर्दषष्ट कर सकेगा,-
a) खदान में काम करने िाले खास कैटेगरी के लोगों को कदया जाने िाला लैंप का टाइप; या
b) ककसी खदान में खास जगहों या एररया में दी जाने िाली लाइटटंग का स्टैंििष।
159. सफ्े टी लपैं ों का रखरखाि और जाचं ।- (1) इस मकसद के भलए भनयुक्त एक सिम व्यभक्त ऐसे सिी लैंपों
को इस्तेमाल के भलए जारी करन े से पहले साफ करेगा, उनकी छंटाई करेगा, जांच करेगा और उन्ह ें सुरभित रूप
से लॉक करेगा, और ऐसा कोई िी लैंप तब तक इस्तेमाल के भलए जारी नहीं ककया जाएगा जब तक िह ठीक स े
काम करन े की हालत में न हो और सरु भित रूप से लॉक न हो;136 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) इस प्रयोजन के भलए भनयुक्त एक सिम व्यभक्त प्रत्येक सुरिा लैंप को उपयोग के भलए िूभमगत ले जान े
से ठीक पहले सतह पर उसकी जांच करेगा और जहां तक संिि हो बाहरी भनरीिर् से स्ियं आश्वस्त होगा कक
ऐसा लैंप सुरभित कायषशील भस्िभत में ह ै और सरु भित रूप से बंद ह:ै
बशते कक इस प्रकार भनयुक्त व्यभक्त भिभनयमन 154 के उप-भिभनयम (2) और (3) के अंतगषत भनधाषररत
कतषव्यों के अलािा कोई अन्य कतषव्य नहीं भनिाएगा;
(3) इस प्रयोजन के भलए भनयुक्त एक सिम व्यभक्त प्रत्येक सेफ्टी लैंप को उपयोग के पिात िापस लान े पर
उसकी जांच करेगा।
(4) यकद उप-भनयम (3) के अन्तगषत की गई जांच में यह पाया जाता ह ै कक कोई लैंप िभतिस्त ह ै अििा
उसका दरुु पयोग ककया जा रहा ह,ै तो िह व्यभक्त िभत या दरुु पयोग की प्रकृभत को इस प्रयोजन के भलए रखी गई
भजल्दबंद पुभस्तका में अििा पुनप्राषभप्त योग्य तिा संपादन-अिम इलैक्ट्रॉभनक रूप में दजष करेगा, ऐसी प्रत्येक
प्रभिभष्ट प्रबंधक द्वारा प्रभतहस्तािररत या ई-हस्तािररत की जाएगी तिा कदनांक अंककत ककया जाएगा।
(5) प्रबंधक, सहायक प्रबंधक, या इस प्रयोजन के भलए भनयक्तु कोई सिम व्यभक्त कम से कम प्रत्येक सात
कदन में एक बार उपयोग में लाए जा रह े प्रत्येक सुरिा लपैं की अच्छी तरह से जांच करेगा और ऐसे प्रत्येक लैंप
की जाचं के पररर्ामों को इस प्रयोजन के भलए रखी गई भजल्दबंद पृष्ठ िाली पुस्तक में या पुनप्राषभप्त योग्य तिा
असंपादन योग्य इलेक्ट्रॉभनक रूप में दजष करेगा।
(6) ककसी िी व्यभक्त को इस भिभनयमन के अतं गतष सिम व्यभक्त के रूप म ें तब तक भनयक्तु नहीं ककया जाएगा
जब तक कक उस े सफ्े टी लपैं की मरम्मत और रखरखाि, खान गसै ों तिा उनके परीिर् में प्रभशभित न ककया
गया हो।
बशते कक इन भिभनयमों के लागू होने के बाद, धातु खान भिभनयमन, 1961 के भिभनयमन 12 के
अंतगषत प्रदत्त गैस परीिर् प्रमार्पत्र का धारक िी इस भिभनयमन के अंतगतष सिम व्यभक्त माना जाएगा।
160. सफ्े टी लपैं का इस्तमे ाल.- (1) हर सेफ्टी लैंप पर नंबर भलखा होगा और जब तक लैंप इस्तेमाल में ह,ै
उसका नंबर पढने लायक हालत में रखा जाएगा।
(2) इस प्रयोजन के भलए भनयुक्त एक सिम व्यभक्त, दीप-कि से जारी ककए गए और िापस ककए गए दीपों
का अभिलेख रखेगा और इस प्रकार रखे गए अभिलेख में, ककसी व्यभक्त को जारी ककए गए दीपों की संख्या उसके
नाम के सामने दजष की जाएगी।
(3) यकद कोई व्यभक्त लैंप-रूम में उसे जारी ककए गए लैंप के अलािा कोई अन्य लैंप लौटाता ह,ै तो उस
व्यभक्त को पररितषन का कारर् और पररभस्िभतयां स्पष्ट करनी होंगी।
(4) कोई िी अनभधकृत व्यभक्त लम्ै प-रूम से कोई सेफ्टी लैम्प न तो लेगा और न ही देगा।
(5) हर व्यभक्त भजसे लैंप भमला ह,ै उसे यह संतुभष्ट करनी चाभहए कक लैंप पूरा ह ै और अच्छी हालत में ह ै और
अगर उसे उसमें कोई खराबी कदखे तो िह उस े तरु ंत लैंप-रूम में िापस कर देगा।
(6) कोई िी व्यभक्त जानबूझकर ककसी सेफ्टी लैंप को नुकसान नहीं पहुचं ाएगा या अनुभचत तरीके स े
इस्तेमाल नहीं करेगा, न ही उसे खोलेगा या उसका ताला खोलेगा या खोलने का प्रयास करेगा।
(7) यकद कोई व्यभक्त पाता ह ै कक उसके कब्ज े में रखा सेफ्टी लैंप खराब हो गया ह,ै तो िह व्यभक्त तुरंत
सािधानीपूिषक लौ को बुझा देगा, यकद कोई हो, और अपने िररष्ठ अभधकारी को इस त्य की सचू ना देगा।
(8) प्रत्येक खान में सुरिा लैंपों की संख्या इतनी होगी कक उन्ह ें जारी करने से पहले पूरी तरह सफाई तिा
जाँच की जा सके तिा ककसी खान में उपलब्ध कराए गए सुरिा लैंपों की पयाषप्तता अििा अपयाषप्तता के संबंध
में ककसी संदेह की भस्िभत में इसे भनर्षय के भलए मुख्य भनरीिक-सह-सुभिधाप्रदाता को िेजा जाएगा।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 137
161. सफ्े टी लपैं और इलभे क्ट्रक टॉच ष या लपैं का मटें ेनसें और ररपये र। - (1) हर सेफ्टी लैंप और इलेभक्ट्रक टॉच ष
या लैंप को ठीक से जोड़ा जाएगा और ठीक से मेंटेन ककया जाएगा और अगर ऐसा कोई लैंप या टॉचष खराब या
िैमेज पाया जाता ह,ै तो उस े तब तक इस्तेमाल नहीं ककया जाएगा या इस्तेमाल के भलए नहीं कदया जाएगा जब
तक कक खराबी या िैमेज ठीक नहीं हो जाता।
(2) यकद ज्िाला सुरिा लैंप के ककसी गेज के तार टूट जाएं अििा जल जाएं तो गेज को आगे उपयोग के
भलए पुन:स्िाभपत नहीं ककया जाएगा।
(3) िभतिस्त और दोर्पूर्ष गेज, कांच या सफ्े टी लैंप के अन्य िागों को सेफ्टी लैंप कि में नहीं रखा जाएगा
या संिहीत नहीं ककया जाएगा।
(4) सेफ्टी लैंप का कोई िी कांच तिा भिद्युत सफ्े टी लैंप का कोई िी बल्ब, ऐसे कांच या बल्ब से
प्रभतस्िाभपत नहीं ककया जाएगा, जैसा कक मुख्य भनरीिक-सह-सुभिधाकताष समय-समय पर सामान्य या भिशर्े
आदशे द्वारा भनर्दष्टष करे तिा सेफ्टी लैंप का कोई अन्य िाग, बत्ती या बैटरी के अलािा, जैसा िी मामला हो,
लैंप के भनमाषताओं द्वारा अनुमोकदत भिभनदेशों के अनुसार भनर्मषत िाग के अलािा प्रभतस्िाभपत नहीं ककया
जाएगा:
बशते कक इम्पोटेि सेफ्टी लैंप के मामले में, देश में बना पाटष इस्तेमाल ककया जा सकता ह,ै अगर िह ऐसे
भिज़ाइन का हो भजस े मुख्य भनरीिक-सह- सुभिधाकताष न े मंज़ूरी दी हो।
(5) ककसी िी मरम्मत ककये गये िाग का उपयोग सेफ्टी लैंप में नहीं ककया जायेगा।
(6) भनरीिर् या ज्िलनशील गैस की उपभस्िभत का पता लगाने या परीिर् के उद्देश्य से रखे गए प्रत्येक लौ
सुरिा लैंप में, मुख्य भनरीिक-सह-सुभिधाकताष द्वारा अनुमोकदत प्रकार के तेल के अलािा ककसी अन्य तेल का
इस्तेमाल नहीं ककया जाएगा।
(7) कोई िी भिद्यतु सरु िा लैंप तब तक उपयोग के भलए जारी नहीं ककया जाएगा, जब तक कक बैटरी और
हिे पीस के किर ठीक स े जोड़े न गए हों, सुरभित रूप से लॉक और सील न ककए गए हों, और बैटरी ठीक स े
चाजष न हो गई हो।
(8) ककसी िी भिद्युत लैंप को केबल से लटकाया या पकड़ा नहीं जाएगा।
162. सरु िा लपैं -किों म ें बरती जान े िाली सािधाभनया।ं - (1) कोई िी भबना इजाज़त िाला व्यभक्त सफ्े टी लैंप
रूम में नहीं आएगा।
(2) कोई िी व्यभक्त सेफ्टी लैंप रूम में धूम्रपान नहीं करेगा।
(3) जहां सफ्े टी लैंपों में पेट्रोल, बेंज़ोल या कोई अन्य अत्यभधक िाष्पशील भस्पररट का उपयोग ककया जाता
ह,ै िहां भनम्नभलभखत सािधाभनयां बरती जाएंगी, अिातष :-
a) लैंपों को एक अलग कमरे में साफ, पुनः लगाया और कफर से िरा जाएगा;
b) ककसी िी ऐसे कमरे में केिल उतनी मात्रा में िाष्पशील भस्पररट रखी जाएगी भजतनी एक कायष कदिस
के भलए आिश्यक हो;
c) लैंप के अंदर के ररलाइटर को उसी टेबल पर नहीं भनकाला जाएगा और न ही उनकी सफाई, मरम्मत या
उन्ह ें कफर से लगाया जाएगा, जहाँ लैंप साफ, कफर से लगाए या कफर स े िरे जाते ह;ैं और
d) हर कमरे म ें सही संख्या में सही आग बुझाने िाल े यंत्र कदए जाएंगे और इस्तेमाल के भलए तैयार रख े
जाएंगे।138 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय – XIII
भिस्फ ोटक और भिस्फ ोटन
163. खानों म ें इस्तमे ाल होन े िाल े भिस्फोटकों के प्रकार.- (1) ककसी खान में कोई िी भिस्फोटक इस्तेमाल नहीं
ककया जाएगा, भसिाय उसके जो माभलक, अभिकताष या प्रबंधक द्वारा कदया गया हो और जो अच्छी क्वाभलटी का
और अच्छी हालत में हो।
(2) फ़्यूज़ या िेटोनेटर के अलािा कोई िी भिस्फोटक खदान में उपयोग के भलए नहीं कदया जाएगा, न ही
खदान के ककसी भहस्स े में ले जाया जाएगा या इस्तेमाल ककया जाएगा, जब तक कक िह कारतूस के रूप में न हो:
बशते कक साइट भमक्स्ि स्लरी या इमल्शन भिस्फ ोटकों या अमोभनयम नाइट्रेट फ्यूल ऑयल को इस्तेमाल के
भलए कदया जा सकता ह ै या गैर-कारतूस रूप में भलया या इस्तेमाल ककया जा सकता ह।ै
(3) भिस्फोटक कारतसू खदान में केिल उसी रूप में प्रयोग ककये जायेंगे भजस रूप में िे प्राप्त हुए ह।ैं
(4) खलु े बारूद स े कारतसू तयै ार करना, बारूद को सखु ाना तिा गील े कारतसू ों का पनु र्नमष ार्ष ककसी सिम
व्यभक्त द्वारा तिा केिल लाइसडें सगं प्राभधकरर् द्वारा अनमु ोकदत स्िान पर तिा भिस्फोटक अभधभनयम , 1884
(1884 का 4) के अन्तगषत बनाए गए भनयमों के अनुसार ककया जाएगा।
164. भिस्फ ोटकों का िण्ि ारर्.– (1) माभलक , अभिकताष या प्रबंधक ककसी खान के पररसर में, भिस्फ ोटक
अभधभनयम, 1884 (1884 का 4) के तहत बनाए गए भनयमों के प्रािधानों के अलािा, ककसी िी भिस्फोटक का
िण् िारर् नहीं करेगा, या जानबूझकर ककसी अन्य व्यभक्त को िण् िारर् करने की अनुमभत नहीं देगा।
(2) भिस्फोटक अभधभनयम, 1884 (1884 का 4) के प्रािधानों के तहत लाइसेंडसंग प्राभधकरर् द्वारा
भिभधित अनुमोकदत बारूदघर को छोड़कर ककसी िी ििन में भिस्फोटक नहीं ले जाया जाएगा या रखा
जाएगा।
(3) ककसी खदान में ज़मीन के नीचे भिस्फोटकों का ििं ारर् मुख्य भनरीिक-सह-सुभिधाकताष की भलभखत
स्िीकृभत के भबना नहीं ककए जाएगं े और यह ऐसे शतों के अधीन होगा जो उसमें बताए गए हों और ऐसा
िंिारर् केिल भिस्फोटक अभधभनयम, 1884 (1884 का 4) के प्रािधानों के तहत बनाए गए भनयमों के
प्रािधानों के अनुसार भिभधित लाइसेंस प्राप्त पभत्रका या पभत्रकाओं में ही ककया जाएगा।
(4) भिस्फोटक अभधभनयम, 1884 (1884 का 4) के उपबंधों के अधीन लाइसेंडसंग प्राभधकरर् द्वारा
भिस्फोटकों के िण्िारर् के भलए कदया गया प्रत्येक लाइसेंस, या उसकी एक सत्य प्रभतभलभप, खान कायाषलय म ें
रखी जाएगी।
165. भिस्फ ोटकों के ििं ारकरर् के भलए बारूदघर, ििं ार और पररसर.– (1) प्रत्य ेक बारूदघर, िंिार या
पररसर, जहा ँ भिस्फ ोटकों का िंिारकरर् होता ह,ै ककसी सिम व् यभक्त के प्रिार में रहगे ा, जो भिस्फ ोटकों की
समुभचत प्राभप्त, िंिारकरर् और भनगषम के भलए उत् तरदायी होगा।
(2) बारूदघर स े भिस्फोटक तब तक नहीं भनकाल े जाएँगे जब तक कक उनकी तुरन्त उपयोग के भलए
आिश्यकता न हो:
शत ष यह ह ै कक अगर कोई भिस्फोटक बारूदघर म ें िापस आ जाता ह,ै तो नया स्टॉक इस्तमे ाल करन े स े पहल े
उस े कफर स े जारी ककया जाएगा।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 139
(3) भिस्फ ोटकताष या इस प्रयोजन के भलए प्राभधकृत पदधारी द्वारा हस्त ािररत भलभखत माँग पर सिम
व् यभक्तयों को ही और उनके हस्त ािर या अंगूठा-भनशानी लेकर ही भिस्फ ोटक कदए जाएँगे, भजन् ह ें
बारूदघर, िंिार या पररसर के प्रिारी द्वारा सरं भित रखा जाएगा।
(4) बारूदघर या िंिार या पररसर के प्रिारी व्यभक्त समय-समय पर मुख्य भनरीिक-सह-सुभिधाकताष द्वारा भनर्दष्टष
ककए गए सामान्य या भिशेर् आदेश द्वारा, इस प्रयोजन के भलए रखी गई एक बाध्य पन्न े िाली पुस्तक में या पुनः प्राप्त
करने योग्य और गैर-संपादन योग्य इलेक्ट्रॉभनक रूप में, प्रत्येक सिम व्यभक्त को जारी ककए गए भिस्फोटकों का एक स्पष्ट
और सटीक ररकॉिष और बारूदघर या िंिार या पररसर म ेंिापस ककए गए भिस्फोटकों का एक समान ररकॉि षबनाएगा।
166. भिस्फ ोटकों को ल े जान े के भलए परे टया ँ और आधान.– (1) कोई भिस्फ ोटक दढृ संभनर्मषत और सुरभित
रूप म ें ताला लगी पेटी या आधान में ही बारूदघर स े भनगषभमत ककए या ककसी खान में ल े जाए जाएँगे, अन् यिा
नहीं :
बशते, लौह या इस्प ात की बनी पेरटयों या आधानों पर िली प्रकार से जस् ता ढाए जाएँगे, और कोई पेटी
या आधान, जो अभधस्फ ोटकों को ल े जाने के भलए हो, ककसी धातु या अन् य चालक सामिी स े नहीं बनाया
जाएगा।
बशते , ओपनकास्ट माइन के मामले में, भिस्फ ोटक को बारूदघर से प्राइडमंग स्टेशन या ब्लाडस्टंग की
जगह तक ओररभजनल पैक्ि केस में, उस भिस्फ ोटक िाहन में ले जाया जाएगा भजसके पास इस काम के भलए
िैध लाइसेंस हो।
(2) ककसी िेटोनेटर को ऐस े परे टया ँ और आधान में नहीं रखा जाएगा भजसमें अन्य भिस्फोटक, सामिी या
उपकरर् हों तिा दो या दो से अभधक प्रकार के िेटोनेटर एक ही परे टया ँ और आधान में नहीं रखे जाएंगे:
बशते कक इस उप-भनयमन म ें कुछ िी गील े कामकाज में या डसंककंग शाफ्ट या भिनज़ में उपयोग के भलए
एक ही मामले या कंटेनर में िेटोनेटर के साि लगे प्राइमर कारतसू के पररिहन को प्रभतबंभधत नहीं करेगा।
(3) ककसी िी िेटोनेटर को पेरटयाँ और आधान से तब तक बाहर नहीं भनकाला जाएगा जब तक कक उसका
तुरन्त उपयोग करना आिश्यक न हो।
(4) जब तक अन्यिा प्रािधान न ककया गया हो, भिभनयम 168 म ें ककसी िी परे टया ँ और आधान में दस
ककलोिाम से अभधक भिस्फोटक नहीं होगा, और कोई िी व्यभक्त ककसी िी स्िान पर एक समय में दो से अभधक
ऐसे परे टया ँ और आधान अपने कब्जे में नहीं रखेगा:
बशते कक इस सब-रेगुलेशन में कोई िी बात िुभमगत बारूदघर सप्लाई करने के भलए िोक में ज़्यादा
मात्रा में भिस्फोटक ले जाने पर रोक नहीं लगाएगी।
(5) प्रत्येक पेरटयाँ और आधान को संख्या दी जाएगी और जहां तक संिि हो, िही पेरटयाँ और आधान
प्रभतकदन, यिाभस्िभत, उसी ब्लास्टर या सिम व्यभक्त को जारी ककया जाएगा।
(6) प्रत्येक पेरटयाँ और आधान की चाबी ब्लास्टर द्वारा अपनी पारी के दौरान अपने कब्ज े में रखी जाएगी।
167. भिस्फ ोटकों का िहन । - (1) जब िोक में भिस्फ ोटक को शाफ्ट या डिंज में उतारा या उठाया जाता ह,ै तो
भिस्फ ोटक िाले केज, भस्कप या बकेट पर एक पहचान का भनशान लगाया जाएगा; या भिस्फ ोटक का इंचाज ष
व्यभक्त उसी केज, भस्कप या बकेट में सफर करेगा।
(2) भिस्फ ोटक िाले हर केज, भस्कप या बकेट को धीरे से नीचे या ऊपर ककया जाएगा; और भपट टॉप अटेंिेंट या
बेलमैन की यह ड्यूटी होगी कक केज, भस्कप या बकेट को चलाने से पहले, िह िाइंडिंग इंजन ऑपरेटर को ठीक
से चेतािनी दे।140 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) जब भिस्फोटकों को सीढी पर ल े जाया जा रहा हो, तो प्रत्येक पेरटयाँ और आधान को उसे ल े जाने िाल े
व्यभक्त के शरीर से सरु भित रूप से बांधा जाएगा।
(4) ब्लास्टर के अलािा कोई िी व्यभक्त ककसी प्राइडमंग कारतसू को ऐसे शाफ्ट में नहीं ले जाएगा जो िूबने की
प्रकक्रया में हो।
(5) ककसी िी प्राइडमंग कारतूस को केिल मोटे फेल्ट बैग या अन्य कंटेनर में ले जाया जाएगा, जो भिभनयमन
166 के उप-भिभनयमन (2) में भनर्दषष्ट झटकों से बचान े के भलए पयाषप्त हो।
(6) कोई िी व्यभक्त श्रेर्ी 2 या श्रेर्ी 3 के भिस्फोटकों तिा िेटोनेटरों या ककसी अन्य श्रेर्ी 6 के भिस्फोटक,
भजसमें प्रज्िलन या प्रज्िलन का अपना साधन हो, को एक ही गाड़ी या िाहन में पररिहन नहीं करेगा।
[ स्पष्टीकरर्: श्रेर्ी 2, श्रेर्ी 3 तिा श्रेर्ी 6 के भिस्फोटकों तिा िेटोनेटर का िही अि ष ह,ै जो भिस्फोटक भनयम,
2008 के अंतगतष िगीकृत या पररिाभर्त ह।ैं ]
(7) भिस्फोटकों स े िरे िाहन या गाड़ी केिल इस प्रयोजन के भलए भनर्दषष्ट स्िान पर ही पाकष ककए जाएंगे, चाह े
िह चार्जिंग स्िान के भनकट हो या खदान में कहीं और।
(8) ककसी िी स्िचाभलत मशीन का इस्तेमाल खदान में जमीन के नीचे भिस्फोटकों के पररिहन के भलए तब तक
नहीं ककया जाएगा, जब तक कक मुख्य भनरीिक-सह-सुभिधाकताष की भलभखत पूिष अनमु भत न हो और ऐसी शतों
के अधीन न हो, जो उसमें भनर्दषष्ट की जा सकती ह।ैं
168. िोक म ें बारूद का पररिहन। - िोक में भिस्फ ोटक के पररिहन के भलए शतें और दसू री जानकारी मुख्य
भनरीिक-सह- सुभिधाकताष द्वारा समय-समय पर एक जनरल आदेश में बताई जाएंगी।
169. ररजि ष स्टेशन.- (1) भिस् फोटक िाला कोई िी पेरटयाँ और आधान ज़मीन के नीचे नहीं छोड़ा जाएगा या
रखा जाएगा, भसिाय उस जगह के जो मैनेजर न े इस काम के भलए तय की हो और ऐसी जगह पर हो जहा ँ काम
करने िाले लोग अक्सर न आते हों और ऐसी हर जगह को साफ़, सुरभित और अच्छी तरह से घेरा हुआ रखा
जाएगा, और उस पर 'RESERVE STATION' साफ़-साफ़ भलखा होगा।
(2) ककसी खान में ररजिष स्टेशन की स्िापना के भलए स्िल चयन की शत ें तिा अन्य भििरर् मुख्य भनरीिक-
सह-सुभिधाप्रदाता द्वारा सामान्य आदेश में भिभनर्दषष्ट ककए जाएंगे।
170. भिस्फ ोटकता.ष - (1) चाजष तैयार करना और चार्जिंग और छेद बनाना एक सिम व्यभक्त द्वारा या उसकी
पसषनल देखरेख में ककया जाएगा, भजसे इन भनयमों में 'ब्लास्टर' कहा गया ह,ै जो खुद ही शॉट फायर करेगा।
(2) ककसी व्यभक्त को ब्लास्टर भनयुक्त नहीं ककया जाएगा, जब तक कक िह-
a) िूभमगत खदानों के मामले में, प्रबंधक का प्रमार्पत्र या खनन पयषिेिक का सर्टषकफकेट या सहायक
खनन पयिष िे क का सर्टषकफकेट या ब्लास्टर का सर्टषकफकेट; और
b) खुली खदान कायष के मामले में प्रबंधक प्रमार्पत्र या खनन पयषिेिक प्रमार्पत्र या सहायक खनन
पयषिेिक प्रमार्पत्र या ब्लास्टर प्रमार्पत्र भजसमें खुली खदान कायष तक सीभमत प्रमार्पत्र
शाभमल ह।ैं
(3) यकद ककसी िी समय ककसी खान या भजले में भिभनयमन धारा 40 या 122 में भनर्दषष्ट सिम व्यभक्त के
प्रिार के अंतगषत 30 या अभधक व्यभक्त कायषरत ह,ैं तो ऐसा व्यभक्त ब्लास्टर के कतव्यष ों का पालन नहीं करेगा।
(4) कोई िी व्यभक्त भजसका िेतन शॉट-फायटरंग चलाने स े प्राप्त खभनज, चट्टान या मलबे की मात्रा पर
भनिषर करता ह,ै उसे ब्लास्टर के कतव्यष ों का पालन करने के भलए भनयुक्त नहीं ककया जाएगा।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 141
(5) प्रबंधक समय-समय पर शॉट-होल की अभधकतम संख्या भनधाषररत करेगा जो एक ब्लास्टर ककसी एक
भशफ्ट में फायर कर सकता ह ै और यह संख्या भनम्नभलभखत पर आधाररत होगी-
(क) इन भिभनयमों के प्रािधानों के अनुसार शॉट-होल तैयार करने और फायर करने के भलए सामान्य
रूप से आिश्यक समय ;
(ख) उस ब्लास्टर को उन स्िानों के बीच जान े के भलए आिश्यक समय जहां शॉट-होल फायर ककए
जाते ह;ैं
(ग) अपने काम को पूरा करने में उसे भमलने िाली मदद, अगर कोई हो; और
(घ) उसको सौंपे गए कोई अन्य कतषव्य , चाह े िैधाभनक हो अििा अन्यिा, और ककसी िी भस्िभत में
इससे अभधक नहीं होंगे-
(i) 80 अगर उन्ह ें भबजली से या इिाइटर कॉिष से जलाया जाता ह ै और
(ii) अन्य मामलों में 50:
बशते कक जहां खास हालात हों, िहा ं मुख्य भनरीिक-सह- सुभिधाकता ष भलखकर आदशे देकर और उसम ें
बताई गई शतों के तहत, ऊपर बताए गए भनयमों के भहसाब से शॉट-होल की संख्या तय करने की इजाज़त द े
सकता ह।ै
(6) ककसी ब्लास्टर को उसकी पारी के दौरान जारी ककए गए तिा उसके कब्जे में रखे गए िेटोनेटरों की संख्या,
उप-भनयम (5) के अन्तगषत फायर करने की अनुमभत उसे कदए गए शॉट-होल की अभधकतम संख्या से अभधक नहीं
होगी।
171. शॉट-भिस्फ ोटन के औजार.- (1) ड्यूटी पर तैनात प्रत्येक ब्लास्टर को भनम्नभलभखत उपलब्ध कराए जाएंगे-
(क) एक उपयुक्त शॉट-फायटरंग उपकरर्;
(ख) उपयुक्त शॉट-फायटरंग केबल;
(ग) एक उपयुक्त भिद्युत लैंप या टॉचष, एक सीटी और एक स्टॉप िॉच;
(घ) पूर्षतया लकड़ी से बना एक उपकरर्, जो आक्रमर् करने तिा छेद करने के भलए उपयुक्त हो;
(ङ) पीतल या लकड़ी से बना एक खुरचनी जो शॉट-फायटरंग के छेदों को साफ करन े के भलए उपयुक्त
हो;
(च) जहाँ फ़्यूज़ उपयोग में लाए जाते ह,ैं फ़्यूज़ काटने के भलए एक चाकू और जब तक मशीन-कैप्ि
फ़्यूज़ उपलब्ध न कराए गए हों, िेटोनेटरों को कक्रम्प करने के भलए उपयुक्त कक्रम्पस ष की एक
जोड़ी िी;
(छ) जहाँ िेटोनेटर का उपयोग ककया जाता ह,ै कारतूस को िड़काने के भलए लकड़ी अििा अलौह
धातु से बना भप्रकर;
(ज) दरारें पता लगान े के भलए एक उपयुक् त औजार; और
(झ) शॉट-फायटरंग पररपि की जाँच के भलए एक पररपि परीिक।
(2) उप-भिभनयम (1) के अंतगषत प्रदान ककए गए उपकरर् या युभक्त के अलािा कोई अन्य उपकरर् या युभक्त
ब्लास्टर द्वारा इस्तेमाल नहीं की जाएगी।142 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
172. शॉट-होलों का िेधन, चार्जगिं , स् टेडमगं और भिस्फ ोटन.– - (1) शॉट-होल भिल करने के भलए ककसी िी
भिल का इस्तेमाल तब तक नहीं ककया जाएगा जब तक कक िह उस भिस्फ ोटक के कारतूस के व्यास से कम स े
कम 0.3 सेंटीमीटर की जगह न छोड़े भजसका इस्तेमाल करना ह।ै
(2) ककसी िी शॉट-होल को पूरी तरह साफ ककए भबना चाजष नहीं ककया जाएगा।
(3) ककसी िी शॉट-होल को चाजष करने से पहले, छेद की कदशा, जहां तक संिि हो, छत या अन्य
सुभिधाजनक स्िान पर स्पष्ट रूप से भचभह्नत की जाएगी।
(4) ककसी िी िेटोनेटर को प्राइडमंग कारतूस में तब तक नहीं िाला जाएगा जब तक कक उसका इस्तेमाल न
ककया जाना हो, तिाभप गीले कायष के मामले में, प्राइडमंग कारतसू भनकटतम सुभिधाजनक सूखे स्िान पर तैयार
ककए जा सकत े ह ैं और ऐस े प्राइम ककए गए कारतूस को सुरभित रूप स े बंद पेरटयाँ और आधान म ें काय ष स्िान
तक ले जाया जाएगा।
(5) एक बार प्राइडमंग कारतसू में िाल कदए गए िेटोनेटर को बाहर नहीं भनकाला जाएगा।
(6) ककसी शॉट-होल में दो प्रकार के भिस्फोटकों के उपयोग के भलए, प्रबंधक भिस्फोटकों के सरु भित उपयोग के
भलए स्िायी आदेश तैयार करेगा तिा उन्ह ें लागू करेगा तिा इस संबंध में भििरर् भिभनयमन 104 में संदर्िषत
खनन योजना में शाभमल ककया जाएगा।
(7) ब्लास्टर को अपने सिोत्तम भनर्षय के अनुसार यह सुभनभित करना चाभहए कक भनष्पाकदत ककए जाने िाल े
कायष को ध्यान में रखत े हुए कोई िी शॉट होल ओिर-चाजष या अंिर-चाजष न हो।
(8) शाट का भिस्फ ोट भिद्युत द्वारा या ककसी अन्य साधन अििा उपकरर् द्वारा चलाई जाएंगी, जैसा कक
मुख्य भनरीिक-सह-सुभिधाकताष द्वारा अनुमोकदत हो।
(9) प्रत्येक शॉट-होल को पयाषप्त और उपयुक्त गैर-ज्िलनशील स्टेडमंग के साि स्टेम ककया जाएगा ताकक
शॉट को बाहर भनकलन े से रोका जा सके।
(10) केिल ढीली िरी हुई रेत, या हल्के से दबाई गई नरम भमट्टी, या रेत और भमट्टी या पानी का एक ठोस
लेककन कठोर नहीं भमश्रर् का उपयोग स्टेडमंग के रूप में ककया जाएगा।
(11) शॉट-होल को चाजष करने या रोकने के भलए ककसी धातु के उपकरर्, खुरचनी या छड़ का इस्तेमाल
नहीं ककया जाएगा और ककसी भिस्फोटक को अपयाषप्त आकार के छेद में जबरदस्ती नहीं दबाया जाएगा।
(12) ठीक से भिल ककए गए, चाजष ककए गए और स्टेम ककए गए शॉट-होल के अलािा कोई िी शॉट-फायटरंग
नहीं चलाई जाएगी।
(13) 1.2 मीटर से कम लंबाई िाले फ्यूज से शॉट-होल नहीं बनाया जाएगा।
(14) फ्यूज जलाने के उद्देश्य से या शॉट फायटरंग केबल को शॉट होल से जोड़ने से पहले, शॉट होल के
आसपास से सिी अभतररक्त भिस्फोटक हटा कदए जाएंगे।
(15) जहां तक संिि हो, शॉट-फायटरंग उसी ब्लास्टर द्वारा चलाई जाएगी भजसन े उसे चाजष ककया िा।
(16) ककसी िी खदान में भजसमें बारूद के अलािा अन्य भिस्फोटकों का उपयोग ककया जाता ह,ै प्रत्येक शॉट-
फायटरंग इलेक्ट्रॉभनक रूप स े चलाई जाएगी।
(17) एक राउंि में दस से अभधक छेद नहीं ककए जाएंगे जब तक कक उन्ह ें इलेक्ट्रॉभनक रूप से या इिाइटर
कॉिष के माध्यम से फायर नहीं ककया जाता ह।ै
(18) ककसी िी शॉट-होल को चाजष नहीं ककया जाएगा भसिाय उनके भजन्ह ें उस राउंि में फायर ककया जाना
ह ै और सिी शॉट-होल भजन्ह ें चाजष ककया गया ह ै उन्ह ें एक राउंि में फायर ककया जाएगा।
(19) खुली खदानों में कायष करत े समय कदन के उजाले के समय को छोड़कर शॉट-फायटरंग नहीं चलाई
जाएगी।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 143
(20) जहां बड़ी संख्या में गोभलया ं चलानी हों, िहां जहां तक संिि हो, पाभलयों के बीच गोभलयां चलाई
जाएंगी।
(21) कोई िी व्यभक्त पानी या ककसी अनुमोकदत उपकरर् के अलािा ककसी अन्य माध्यम से ककसी स्टेडमंग को
नहीं हटाएगा, या िेटोनेटर लीि को बाहर नहीं भनकालगे ा या ककसी आिेभशत शॉट-होल स े भिस्फोटक नहीं
भनकालेगा।
173. अमोभनयम नाइट्रेट-फ्यलू ऑयल, साइट भमक्स्ि स्लरी या इमल्शन भिस्फ ोटक िगरै ह का इस्तमे ाल -
अमोभनयम नाइट्रेट-फ्यूल ऑयल के इस्तेमाल की शतें, खलु ी खदान म ें भमभश्रत घोल या इमल्शन भिस्फोटक आकद
के उपयोग की जगह को मुख्य भनरीिक-सह-सुभिधाकताष द्वारा एक सामान्य आदेश में भनर्दषष्ट ककया जाएगा।
बशते कक, अमोभनयम नाइट्रेट-ईंधन तेल, साइट भमभश्रत घोल या इमल्शन भिस्फोटक आकद का उपयोग
मुख्य भनरीिक-सह-सुभिधाकताष की भलभखत पूिष अनुमभत के भबना और उसमें भनर्दषष्ट शतों के अधीन िूभमगत म ें
नहीं ककया जाएगा।
174. गहरे छेद म ें भिस्फोट।- (1) ककसी खान में गहरे छेद में भिस्फोट करने की शतें मुख्य भनरीिक-सह-
सुभिधाप्रदाता द्वारा सामान्य आदेश में भनर्दषष्ट की जाएंगी।
(2) ककसी एक कदन चाज ष ककए गए सिी छेद उसी कदन फायर ककए जाएगं :े
बशते, कक खास पररभस्िभतयों में, जहाँ चाज ष ककए गए छेदों को रात िर छोड़ना ज़रूरी हो, यह काम
भसफ़ष मुख् य भनरीिक सह सभु िधाकता ष की पूि ष भलभखत अनुमभत से ही ककया जाएगा, और इसमें उन शतों का
पालन करना होगा जो उसम ें बताई गई हों।
175. इलभे क्ट्रक और इलेक्ट्रॉभनक शॉट-फायटरंग। - (1) मुख् य भनरीिक सह सुभिधाकताष द्वारा अप्रूव्ि टाइप के
सही शॉट-फायटरंग अपैरेटस के अलािा कोई िी शॉट फायर नहीं ककया जाएगा और अपैरेटस द्वारा ककसी िी
एक समय में फायर ककए गए शॉट्स की संख्या उस संख्या से ज़्यादा नहीं होगी भजसके भलए इसे भिज़ाइन ककया
गया ह।ै
(2) प्रत्येक भिद्युत या इलेक्ट्रॉभनक शॉट-फायटरंग उपकरर् इस प्रकार बनाया और उपयोग ककया जाएगा कक-
(क) इसे केिल हटाए जा सकने िाले हिैं ल या प्लग द्वारा ही सचं ाभलत ककया जा सकता ह;ै
(ख) हिैं ल या प्लग को तब तक अपनी भस्िभत में नहीं रखा जाएगा जब तक कक शॉट-फायटरंग
चलने िाली न हो और शॉट-फायटरंग चलते ही उस े हटा कदया जाएगा;
(ग) फायटरंग सर्कषट या तो ऑटोमैरटकली या पुश-बटन भस्िच के ज़ररए बनाया और तोड़ा जाता
ह।ै
(3) ककसी िी दोर्पूर्ष शॉट-फायटरंग उपकरर् का उपयोग नहीं ककया जाएगा और प्रत्येक उपकरर् की हर
तीन महीन े में कम से कम एक बार ककसी सिम व्यभक्त द्वारा जांच की जाएगी ताकक यह सुभनभित ककया जा
सके कक िह सरु भित कायष भस्िभत में ह ै या नहीं।
(4) यकद उपकरर् ठीक से जुड़े सर्कषट में सिी शॉट फायर करन े में भिफल रहता ह,ै तो शॉट-फायरर
उपकरर् को जल्द से जल्द प्रबंधक या सहायक प्रबंधक को िापस कर देगा, और इसका तब तक कफर स े उपयोग
नहीं ककया जाएगा जब तक कक सतह पर इसका परीिर् न हो जाए और यह सुरभित कायष भस्िभत में न पाया
जाए।144 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) उप-भनयम (3) और (4) के अन्तगषत ककए गए प्रत्येक परीिर् का पररर्ाम इस प्रयोजन के भलए रखी
गई भजल्दबंद पृष्ठ पुभस्तका में या पुनप्राषभप्त योग्य, गैर-संपादन योग्य इलैक्ट्रॉभनक रूप में दजष ककया जाएगा और
परीिर् करन े िाले सिम व्यभक्त द्वारा उस पर हस्तािर ककए जाएंगे और कदनांक िाला जाएगा।
(6) भसिडलंग, लाइटटंग या पािर सर्कषट से ककसी िी करंट का इस्तेमाल गोभलया ं चलाने के भलए नहीं
ककया जाएगा।
(7) शॉट-फायटरंग चलाने िाला-
(क) अपनी पारी के दौरान फायटरंग उपकरर् की चाबी अपने कब्जे में रखेगा ;
(ख) पयाषप्त लंबाई की अच्छी तरह से भिद्युतरोधी केबल का उपयोग करें भजससे िह उभचत आश्रय ल े
सके और िूभमगत कायष के मामले में खंिे के दो समकोर् मोड़ लेने के भलए पयाषप्त लंबाई हो और
ककसी िी भस्िभत में यह केबल 50 मीटर से कम लंबाई की नहीं होनी चाभहए;
(ग) केबल को फायटरंग उपकरर् से जोड़ने से पहले, केबल को स्ियं िेटोनेटर लीड्स से जोड़ दें;
(घ) केबल को ककसी िी भबजली या प्रकाश केबल या अन्य भिद्युत उपकरर् के संपकष में आने से बचान े
के भलए सािधानी बरत;ें
(ङ) भिद्युत कंिक्टरों और उपकरर्ों को चोट से बचाने के भलए पयाषप्त सािधाभनयां बरतना;
(च) स्ियं केबल को फायटरंग उपकरर् स े जोड़ेगा और ऐसा करन े स े पहले देखेगा कक आसपास के सिी
व्यभक्तयों ने भिभनयमन 176 के तहत कदए गए प्रािधान के अनुसार उभचत आश्रय ले भलया ह;ै
(छ) गोभलयां चलान े के बाद और फायटरंग की जगह में घुसने से पहले, फायटरंग उपकरर् से केबल को
अलग कर दें।
(8) जहाँ एक ही समय पर एक स े अभधक गोभलयाँ चलाई जानी हों,-
(क) यह ध्यान रखा जाएगा कक सिी कनेक्शन उभचत प्रकार स े लगाए जाएं;
(ख) यकद ज़मीन के नीचे से शॉट-फायटरंग चलाई जाए तो सिी गोभलयाँ श्रृंखला में जोड़ी जाएँगी;
(ग) सर्कषट को फायटरंग उपकरर् से जोड़न े से पहल,े भिद्यतु प्रभतरोध या भनरंतरता के भलए परीिर्
ककया जाएगा, जो कक उद्देश्य के भलए भिशेर् रूप से भिजाइन ककए गए उपकरर् के साि ककया
जाएगा और केिल तिी ककया जाएगा जब आसपास के सिी लोगों ने भिभनयमन 176 के तहत
उभचत आश्रय ले भलया हो;
(घ) शॉट-फायटरंग उपकरर् का केबल अंत में जोड़ा जाएगा;
(ङ) केिल समान भिद्यतु प्रभतरोध िाले िेटोनेटर का ही उपयोग ककया जाएगा।
176. शॉटों को भिस्फ ोरटत करन े के पिू ष आश्रय लने ा। - (1) ब्लास्टर, शॉट-फायटरंग चलाने, रोकने या फायर
करने से पहले, देखेगा कक आस-पास के सिी लोग, अगर कोई हो, तो सहायक के अलािा, सही पनाह ले लें,
और ककसी िी व्यभक्त को शॉट-फायटरंग के पास आन े स े रोकन े के भलए सही कदम उठाएगा और शॉट-फायटरंग
चलाने स े पहले, अगर कोई हो तो, सहायक के साि, सही पनाह लेगा।
(2) ओपनकास्ट कायष की भस्िभत में, ब्लास्टर आिेभशत नहीं होगा या शॉट-फायटरंग नहीं चलाएगा-
(क) जब तक कक ब्लास्टर ने उप-भिभनयम (1) में उभल्लभखत सािधाभनयां नहीं बरती हों;
(ख) जब तक कक फायटरंग की जगह से 500 मीटर के दायरे में आने िाल े पूरे इलाके में, भजसे आग े
िेंजर ज़ोन कहा जाएगा, अच्छे भसिल या मैनेजर द्वारा मंज़ूर दसू रे तरीकों से पूरी चेतािनी न[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 145
दी जाए, और यह िी पक्का ककया जाएगा कक ऐसे इलाके में सिी लोगों ने सही जगह ले ली ह;ै
और
(ग) जहाँ ककसी पभब्लक रोि या रेलिे का कोई भहस्सा िेंजर ज़ोन में आता ह,ै जब तक कक ऐसी रोि
या रेलि े के दो छोर पर, जो िेंजर ज़ोन में आते ह,ैं दो लोग तैनात न हों, दोनों कदशाओं में एक-
एक, भजन्होंने टेलीफ़ोन कम्यभु नकेशन के अच्छे भसस्टम या हूटर या लाउिस्पीकर या दसू रे तरीकों
से, ब्लास्टर को ट्रैकफ़क भक्लयरेंस की जानकारी दे दी हो और उन राहगीरों और गाभड़यों को,
अगर कोई हो, जो ऐसी रोि या रेलिे से गुज़रे हों, चेतािनी दे दी हो।
(3) खुली खदान के कायष के मामले में, जहा ं कोई स्िायी इमारत या स्िायी प्रकृभत का ढाचं ा, जो माभलक स े
संबंभधत नहीं ह,ै खतरे के ित्रे में भस्ित ह,ै एक समय में फायर ककए गए सिी छेदों में कुल अभधकतम चाजष दो
ककलोिाम से अभधक नहीं होगा, जब तक कक मुख्य भनरीिक-सह-सुभिधाकताष द्वारा अनुमभत न दी जाए और
ऐसी शतों के अधीन हो, जैसा कक उसमें भनर्दषष्ट ककया जा सकता ह:ै
बशते कक अगर ब्लाडस्टंग भिले िेटोनेटर या दसू रे तरीकों से की जाती ह ै और लगातार फायर ककए गए
शॉट्स के बीच कम स े कम आधा सेकंि की देरी होती ह,ै तो हर छेद में ज़्यादा से ज़्यादा दो ककलोिाम चाज ष
इस्तेमाल ककया जा सकता ह:ै
यह िी कहा गया ह ै कक अगर फायटरंग की जगह से ऐसी भबडल्िंग या स्ट्रक्चर के ककसी भहस्से की सबस े
कम दरू ी 50 मीटर से कम ह,ै चाह े चाजष ककतना िी हो, तो मुख्य भनरीिक-सह- सुभिधाकताष की भलभखत
परभमशन के भबना और उसम ें बताई गई शतों के भबना कोई ब्लाडस्टंग नहीं की जाएगी।
(4) उप-भनयम (3) में भनभहत ककसी बात के होते हुए िी, मुख्य भनरीिक-सह-सुभिधाकताष भलभखत आदेश
द्वारा तिा भनर्दषष्ट शतों के अधीन, ककसी खदान या उसके िाग को उप-भनयम (3) के प्रािधानों के प्रिाि स े इस
आधार पर छूट दे सकता ह ै कक इसके प्रािधानों का पालन िहां भिद्यमान भिशर्े पररभस्िभतयों के कारर्
आिश्यक या उभचत रूप से व्यािहाररक नहीं ह।ै
(5) जहां जमीन के ऊपर अििा नीचे भस्ित कायष स्िल उड़ते हुए टुकड़ों अििा भमसाइलों से अपयाषप्त
सुरिा प्रदान करत े ह,ैं िहां पयाषप्त आश्रय अििा अन्य सुरिा प्रदान की जाएगी।
(6) जब ज़मीन के नीच े दो काम करने की जगह ें एक-दसू रे से नौ मीटर के अंदर आ जाती ह,ैं तो ब्लास्टर
ककसी िी काम करने की जगह पर तब तक शॉट-फायटरंग नहीं चलाएगा जब तक कक सिी लोग दसू री काम
करने की जगह से बाहर न भनकल जाएं और उस जगह को इस तरह से बंद न कर कदया जाए कक कोई िी
आदमी गलती से शॉट-फायटरंग की सीधी लाइन में न आ जाए।
(7) जहां दो या अभधक आसन्न स्टॉप्स या िेिलपमेंट फेस में गोभलयां चलाई जानी ह,ैं ब्लास्टसष िापसी छोर
की ओर से गोभलयां चलाने का समय इस प्रकार व्यिभस्ित करेंगे, ताकक एक समय में केिल एक स्टॉप्स या
िेिलपमेंट फेस में गोभलयां चलाई जाएं।
177. अनज्ञु ात भिस्फ ोटक का इस्तमे ाल। - (1) ककसी िी खदान या उस भहस्स े म,ें भजस पर भिभनयम 153 लाग ू
होता ह ै या जहा ँ मुख्य भनरीिक-सह- सुभिधाकता ष भलखकर आदेश देकर ऐसे भिस्फ ोटक के इस्तेमाल की
ज़रूरत बताए, परभमटेि भिस् फोटक के अलािा कोई और भिस् फोटक इस्तेमाल नहीं ककया जाएगा।
(2) ककसी खदान या उसके िाग में भजसमें उप-भिभनयम (1) के अन्तगषत अनुमत भिस्फोटकों का उपयोग
आिश्यक ह,ै तब तक ककसी िेटोनेटर का उपयोग नहीं ककया जाएगा जब तक कक िह तांबे की ट्यूब िाला
इलेक्ट्रॉभनक िेटोनेटर न हो।
(3) ककसी अनुमत भिस्फोटक की शॉट-फायटरंग मुख्य भनरीिक-सह-सुभिधाकताष द्वारा समय-समय पर
सामान्य या भिशेर् आदेश द्वारा अनुमोकदत प्रकार के शॉट-फायटरंग चलाने िाले उपकरर् के अलािा नहीं
चलाई जाएगी:146 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
बशते कक जहां भिशेर् पररभस्िभतयां मौजूद हों, मुख्य भनरीिक-सह-सुभिधाकताष भलभखत आदेश द्वारा और
उसमें भनर्दषष्ट शतों के अधीन, ककसी अन्य शॉट-फायटरंग उपकरर् के उपयोग की अनुमभत दे सकता ह।ै
(4) ककसी खान में, भजस पर भिभनयम 153 लागू होता ह,ै भनम्नभलभखत प्रािधान प्रिािी होंगे, अिाषत्:-
(क) भिभनयमों में भनभहत ककसी िी बात के बािजूद, कोई िी व्यभक्त भजसके पास प्रबंधक का प्रमार्
पत्र, या खनन पयषिेिक का प्रमार् पत्र या सहायक खनन पयषिेिक का प्रमार् पत्र नहीं ह,ै द्वारा
कोई शॉट-फायटरंग नहीं चलाई जाएगी या रोकी जाएगी;
(ख) जहाँ एक स े अभधक गोभलयाँ चलाने के भलए चाजष की जाती ह,ैं गोभलयाँ एक साि चलाई जाएँगी;
मुख्य भनरीिक-सह-सुभिधाकताष की भलभखत पूिष अनुमभत के अलािा और उसमें भिभनर्दषष्ट शतों के
अधीन रहते हुए, कोई भिलंब-कक्रया िेटोनेटर इस्तेमाल नहीं ककया जाएगा;
(ग) यकद ककसी हिादार भजले में, ककसी स्िान पर ज्िलनशील गैस की मौजूदगी का पता चलता ह,ै तो
उस स्िान पर या उसकी िापसी की ओर भस्ित ककसी अन्य स्िान पर तब तक कोई शॉट-होल
चाजष नहीं ककया जाएगा, स्टेम नहीं ककया जाएगा या फायर नहीं ककया जाएगा, जब तक कक ऐस े
स्िान को गैस से साफ नहीं कर कदया जाता और सुरभित घोभर्त नहीं कर कदया जाता;
(घ) शॉट-होल या शॉट- होल के एक राउंि को चाजष करने से तरु ंत पहले, और दोबारा शॉट फायर
करन े स े पहले, ब्लास्टर को फायटरंग स्िान के बीस मीटर के दायरे में सिी स्िानों पर ज्िलनशील
गैस के भलए सािधानीपूिषक परीिर् करना चाभहए।
178. शॉट-भिस्फ ोटन के बाद भनरीिर्.- । - (1) शॉट-फायटरंग चलने के बाद, ब्लास्टर उस जगह में तब तक
नहीं घसु ेगा या ककसी दसू रे व्यभक्त को घसु न े नहीं देगा जब तक कक उस जगह का माहौल धूल, धुए ं या धुए ं स े
साफ न हो जाए:
शतष यह ह ै कक ब्लास्टर ककसी दसू रे व्यभक्त के उस जगह में आने से पहले, ध्यान से जांच करेगा और अपन े
सहायक के साि, अगर कोई हो, तो उस जगह को सुरभित बनाएगा।
(2) कोई अन्य व्यभक्त उस स्िान में प्रिेश नहीं करेगा और जहां गािष तनै ात ककए गए ह ैं उन्ह ें तब तक नहीं
हटाया जाएगा जब तक कक जांच न हो जाए और स्िान को सिी तरह से सुरभित घोभर्त न कर कदया जाए।
(3) खुली खदानों के मामले में, शॉट-फायटरंग चलने के बाद, फायर न होने की भस्िभत को छोड़कर, पूरी
तरह स्पष्ट संकेत कदया जाएगा।
(4) शॉट-फायटरंग चलने के बाद, सामिी साफ करन े में लगे सिी लोग भबना फटे कारतसू ों और िेटोनेटरों
की तलाश करेंगे और यकद ऐसा कोई कारतसू और िेटोनेटर पाया जाता ह ै तो उसे हटा कदया जाएगा और
भजतनी जल्दी हो सके उसे ककसी ब्लास्टर या अन्य अभधकारी को सौंप कदया जाएगा।
179. भमसफायरों का होना.– (1) जब तक गोभलयां इलभे क्ट्रकली या इिाइटर कॉिष से फायर न की गई हों, तब
तक फटने िाली गोभलयों की संख्या ब्लास्टर और इस काम के भलए ऑिराइज़्ि ककसी दसू रे सिम व्यभक्त द्वारा
भगनी जाएगी; और जब तक यह पक्का न हो जाए कक सिी गोभलयां फट गई ह,ैं तब तक कोई िी व्यभक्त शॉट-
फायटरंग चलने के 30 भमनट बाद तक उस जगह पर दोबारा नहीं घुसेगा या उसे दोबारा घुसने की इजाज़त
नहीं दी जाएगी:
बशते कक जहां इलेक्ट्रॉभनक तरीके से गोभलया ं चलाई जाती ह,ैं िहां भबजली का सोस ष केबल स े भिस्कनेक्ट होन े
के बाद इस गैप को कम से कम पांच भमनट तक कम ककया जा सकता ह।ै
(2) भमसफायर की भस्िभत में, कायष स्िल के प्रिेश द्वार या प्रिेश द्वारों को बैररकेि या बाड़ लगा कदया
जाएगा ताकक अनजाने में प्रिेश को रोका जा सके, और भमसफायर का पता लगाने या उसे कम करने के अलािा[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 147
कोई अन्य कायष तब तक नहीं ककया जाएगा जब तक कक भमसफायर का पता लगाकर उसे कम न कर कदया
जाए।
(3) खुली खदानों में भमसफायर के स्िान को लाल झंिे से भचभह्नत करना पयाषप्त होगा।
(4) भमसफायर की भस्िभत में, टैडम्पंग को दबाि में संपीभड़त हिा या पानी के साि स्लज्ि ककया जा सकता
ह ै या ऐसे अन्य तरीकों से हटाया जा सकता ह,ै जैसा कक मुख्य भनरीिक-सह-सुभिधाकताष द्वारा अनुमोकदत हो
सकता ह ै और ऐसी शतों के अधीन हो सकता ह,ै जैसा कक उसमें भनर्दषष्ट ककया जा सकता ह ै और इसके बाद छेद
को कफर से प्राइम ककया जाएगा और फायर ककया जाएगा।
(5) यकद भमसफायर में िेटोनेटर ह,ै तो उसके लीि या फ्यूज को शॉट-फायटरंग केबल या कुछ भिभशष्ट माकषर
से एक डस्ट्रंग द्वारा जोड़ा जाएगा।
(6) उस भस्िभत को छोड्कर जहाँ भमसफायर दोर्पूर्ष केबल या दोर्पूर्ष कनेक्शन के कारर् होता ह,ै और दोर्
के सुधार के बाद यिाशीघ्र शॉट-फायटरंग चला दी जाती ह,ै या जहा ँ ककसी शॉट-फायटरंग को कफर स े प्राइम
ककया गया ह ै और उप-भिभनयम (4) के अंतगषत चलाई गई ह,ै एक और शॉट-फायटरंग एक राहत छेद में चलाई
जाएगी भजसे इस तरह रखा जाएगा और इस कदशा में भिल ककया जाएगा कक यह ककसी िी डबंद ु पर भमसफायर
ककए गए छेद से तीस सेंटीमीटर से अभधक पास नहीं होगा, नया छेद एक ब्लास्टर की उपभस्िभत में बोर ककया
जाएगा, अभधमानतः िही व्यभक्त भजसने गोभलयां चलाई िीं।
(7) राहत देने िाली शॉट-फायटरंग चलाए जाने के बाद, ब्लास्टर या प्रबंधक या खनन पयषिेिक का प्रमार्
पत्र या प्रबंधक द्वारा इस प्रयोजन के भलए भनयुक्त सहायक खनन पयषिेिक का प्रमार् पत्र रखने िाले अन्य
सिम व्यभक्त की उपभस्िभत में, शॉट-फायटरंग से नीचे लाई गई सामिी के बीच कारतसू और िेटोनेटर, यकद कोई
हो, की सािधानीपूिषक तलाशी की जाएगी:
बशते कक ज़मीन के नीचे काम करने के मामले में अगर ऐसा कारतूस, िेटोनेटर नहीं भमलता ह,ै तो भजन
टब या ककसी िी ढोने िाली गाड़ी में सामान लोि ककया जाता ह,ै उस े माकष ककया जाएगा और सतह पर आग े
की तलाशी ली जाएगी और जहाँ तक हो सके, िेटोनेटर और कारतूस की तलाशी और ककसी िी अयस्क, पत्िर
या मलबे को लोि करना, भजसमें िेटोनेटर हो सकता ह,ै भबना ककसी औजार की मदद के ककया जाएगा।
(8) यकद भमसफायिष छेद ररलीडिगं शॉट द्वारा नहीं हटाया जाता ह,ै तो उप-भिभनयम (6) और (7) में बताई
गई प्रकक्रया को दोहराया जाएगा।
(9) गलत तरीके से जलाया गया छेद, भजसे भनधाषररत तरीके से ठीक नहीं ककया जा सकता ह,ै को लकड़ी के
प्लग से सुरभित रूप से बंद कर कदया जाएगा और ब्लास्टर, अभधकारी या इस प्रयोजन के भलए अभधकृत व्यभक्त
के अलािा कोई अन्य व्यभक्त ऐसे प्लग को नहीं हटाएगा या हटाने का प्रयास नहीं करेगा।
(10) जब कोई भमसफायर शॉट नहीं भमलता ह,ै या जब भमसफायर शॉट से राहत नहीं भमलती ह,ै तो
ब्लास्टर खदान छोड़ने से पहले-
(क) भिफलता की सूचना ऐसे ब्लास्टर या अभधकारी को देना जो ब्लास्टर स े काय ष मुक्त हो या उसका
कायषिार सिं ाले;
(ख) इस उद्देश्य के भलए रखी गई एक भजल्दबंद पृष्ठ पुभस्तका में या पुनप्राषभप्त योग्य तिा असपं ादन योग्य
इलैक्ट्रॉभनक रूप में, प्रत्येक भमसफायर की ररपोटष दजष करें, चाह े िह संकदग्ध हो, और क्या शॉट-
फायटरंग का छेद िर गया ह ै या नहीं िर गया ह;ै
(ग) ररपोटष पर साइन या ई-साइन करना और, गलत शॉट-होल को ठीक करन े के भलए की गई कारषिाई
को बताई गई बुक में या ररट्रीिबे ल और नॉन-एभिटेबल इलक्े ट्रॉभनक फॉम ष म ें ररकॉि ष करना।
(11) अगली भशफ्ट का ब्लास्टर भमसफायर हुए छेद का पता लगाएगा और उसमें ब्लास्ट करेगा, लेककन यकद
उस स्िान की पूरी जांच के बाद, जहा ं पर भमसफायर होने की सचू ना भमली िी, ब्लास्टर संतुष्ट हो जाता ह ै कक
िास्ति में कोई भमसफायर नहीं हुआ ह,ै तो िह उस स्िान पर भिडलंग की अनुमभत दे सकता ह।ै148 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(12) खुली खदानों के मामले में, खदान के माभलक, अभिकता ष और प्रबंधक एक योजना तयै ार करेंगे भजसम ें
सिी ब्लास्टरों को शॉट-फायटरंग के भमसफायर होने की भस्िभत में अपनाई जाने िाली भिस्तृत प्रकक्रया के बारे में
भनदेश कदए जाएंगे।
180. सॉकेट्स आकद के मामल े म ें सािधानी - (1) ककसी िी काम करने की जगह पर भिडलंग शुरू करन े स े
पहले, उस जगह का इंचाजष सिम व्यभक्त यह देखेगा कक छेद के सामने से सारी ढीली चट्टानें हटा दी गई ह ैं और
प्रस्ताभित शॉट-होल के दो मीटर के दायरे में आने िाले इलाके को अच्छी तरह से साफ कर कदया गया ह ै या
पानी से धो कदया गया ह ै और भमसफायर या सॉकेट्स की मौजूदगी के भलए ध्यान से जांच की गई ह:ै
बशते कक जहां भिशेर् पररभस्िभतयां मौजूद हों, मुख्य भनरीिक-सह-सुभिधाकताष भलभखत आदेश द्वारा और
उसमें भनर्दषष्ट शतों के अधीन, इन प्रािधानों से छूट दे सकता ह।ै
(2) यकद कोई सॉकेट पाया जाता ह ै तो उसे भिभनयमन 179 म ें भनधाषररत तरीके से भनपटाया जाएगा।
(3) कोई िी व्यभक्त एक बार चाजष ककए गए छेद को नहीं खोदेगा या फायर करने से पहले या भमसफायर के
बाद चाजष को िापस लने े का प्रयास नहीं करेगा या शॉट-फायटरंग के बाद छोड़े गए ककसी खाली छेद या सॉकेट
को गहरा नहीं करेगा या उसके साि छेड़छाड़ नहीं करेगा।
181. भिस्फ ोटकता ष के पारी का अन्त होन े पर उसके कतव्ष य । - भशफ्ट खत्म होन े के तरु ंत बाद, ब्लास्टर को य े
करना होगा-
(क) भिभनयम 164 के तहत, इस्तेमाल न ककए गए सिी भिस्फ ोटक को मैगज़ीन या जगह में िापस
करने का प्रािधान ह;ै और
(ख) इस मकसद के भलए रखी गई एक भजल्दबंद ककताब म ें या कफर ऐसे इलेक्ट्रॉभनक रूप में भजस े
बदला जा सके और भजसे बदला न जा सके, ररकॉिष करें कक ककतना भिस्फ ोटक भलया गया,
इस्तेमाल ककया गया और िापस ककया गया, ि े जगह ें जहा ँ गोभलयाँ चलाई गईं और ककतनी
गोभलयाँ चलाई गईं, और अगर कोई भमसफायर हुआ, तो उसे साइन या ई-साइन करके तारीख
िालनी होगी।
182. भिस्फ ोटकों के बारे म ें साधारर् सािधाभनया।ं - (1) कोई िी व्यभक्त, भिस्फ ोटक को संिालते समय या
चाजष तैयार करने या होल चाजष करन े में मदद करते समय, स्मोककंग नहीं करेगा, मोबाइल फ़ोन या इलेक्ट्रॉभनक
गैजेट या बंद लाइट, इलेभक्ट्रक टॉचष या लैंप के अलािा कोई दसू री लाइट नहीं रखेगा या इस्तेमाल नहीं करेगा:
बशते कक इस उप-भनयमन में ककसी बात को फ़्यूज़ जलाने के भलए खुली बत्ती के इस्तेमाल पर रोक
लगाने िाला नहीं माना जाएगा।
(2) कोई िी व्यभक्त ककसी िी मोबाइल फोन, इलेक्ट्रॉभनक गैजेट या इलेभक्ट्रक टॉचष या सलं ि इलेभक्ट्रक लैंप
के अलािा ककसी िी भिस्फोटक मैगज़ीन या पररसर में नहीं ले जाएगा।
(3) जहां िायरलैस या िॉकी-टॉकी उपकरर्ों का इस्तेमाल भिस्फोट कर्मषयों, जसै े सहायक प्रबंधक, भिस्फोट के
प्रिारी खनन पयषिेिक, ब्लास्टर और ब्लास्टर के सहायकों द्वारा ककया जाता ह,ै ऐसे उपकरर्ों के सुरभित
उपयोग के भलए एक मानक संचालन प्रकक्रया, भजसमें रेभियो आिृभत्त के कारर् भिस्फोटक के ककसी आकभस्मक
प्रारंि को रोकन े के संबंध में उनके द्वारा बरती जाने िाली सािधाभनयों को भनर्दषष्ट ककया जाएगा, खान प्रबंधक
द्वारा तैयार की जाएगी और कायाषभन्ित की जाएगी।
(4) माभलक, अभिकताष या प्रबंधक खदान में इसके िंिारर्, पररिहन और उपयोग के दौरान भिस्फोटकों
की चोरी को रोकन े के भलए पयाषप्त कदम उठाएंगे।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 149
(5) माभलक, अभिकताष और प्रबंधक यह सुभनभित करेंगे कक ककसी िी व्यभक्त को भिस्फोटकों के पररिहन,
संचालन और उपयोग के भलए तब तक भनयोभजत न ककया जाए जब तक कक उसे इस प्रयोजन के भलए भिशेर्
प्रभशिर् न कदया गया हो।
(6) इन भिभनयमों में प्रािधान के अलािा, कोई िी व्यभक्त अपने कब्ज े में भिस्फोटक नहीं रखेगा, और न ही
ककसी आिास में भिस्फोटक भछपाएगा या रखेगा।
(7) अगर ककसी व्यभक्त को ककसी खदान में या उसके आस-पास कोई भिस्फोटक सामिी भमलती ह ै तो िह
उसे खदान के मैगजीन या पररसर में जमा कर देगा और ऐसी प्रत्येक घटना की भलभखत सूचना प्रबंधक को दने ी
होगी।
(8) ब्लास्टर और उनके सहायक-
(क) बैटरी चाभलत घभड़याँ, मोबाइल फोन, डसिं ेरटक कपड़े और मोजे का उपयोग न करें;
(ख) भसफ़ष कंिडक्टंग टाइप के जूते पहनें; और
(ग) चमड़े के जूते या बूट के मामले में, तला िी चमड़े का होगा और भबना होबनेल के
होगा।150 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
अध्याय- XIV
मशीनरी, सयं त्रं और उपकरर्
183. धातयु क्तु खानों म ें कुछ मशीनरी, उपकरर् और यभु क्तयों का उपयोग।- (1) ककसी िी आंतररक दहन इंजन
का उपयोग ककसी खान में मुख्य भनरीिक-सह-सुभिधाकताष की भलभखत पूिष अनुमभत के भबना और उसमें भनर्दषष्ट
शतों के अधीन रहते हुए नहीं ककया जाएगा।
(2) प्रत्येक खदान या उसके िाग में जहा ं भिभनयमन 153 लागू होता ह,ै केिल ज्िाला रोधी भिद्युत
उपकरर् और उपकरर् का उपयोग िूभमगत ककया जाएगा, जब तक कक केंद्रीय भिद्यतु प्राभधकरर् (सुरिा और
भिद्युत आपूर्तष से संबंभधत उपाय) भिभनयमन, 2023 के प्रािधानों के तहत अन्यिा प्रािधान न ककया गया हो।
(3) मुख्य भनरीिक-सह-सुभिधाकताष, समय-समय पर आभधकाररक राजपत्र में अभधसूचना के द्वारा, ऐस े
उपकरर्ों, उपस्कर, मशीनरी या अन्य सामिी को भनर्दषष्ट कर सकता ह,ै जो ककसी खान में इस्तेमाल ककए जात े
ह ैं या ककए जा सकते ह,ैं जो ऐसे प्रकार, मानक और बनािट के होंगे, जैसा कक मुख्य भनरीिक-सह-सुभिधाकता ष
द्वारा सामान्य या भिशेर् आदेश द्वारा अनुमोकदत ककया गया हो, और जहा ं ऐसा कोई उपकरर्, उपस्कर,
मशीनरी या अन्य सामिी मुख्य भनरीिक-सह-सुभिधाकताष द्वारा भनर्दषष्ट की गई हो, ऐसा कोई उपकरर्,
उपस्कर, मशीनरी या अन्य सामिी, मुख्य भनरीिक-सह-सुभिधाकताष द्वारा पूिोक्त रूप से अनुमोकदत सामिी के
अलािा, ककसी िी खान में इस्तेमाल नहीं की जाएगी।
(4) जहां ककसी उपकरर्, उपस्कर, मशीनरी या अन्य सामिी के संबंध में मुख्य भनरीिक-सह-सुभिधाकताष न े
उप-भिभनयम (3) के अधीन कोई अभधसूचना नहीं दी ह ै और ऐसा कोई उपकरर्, उपस्कर, मशीनरी या सामिी
ककसी खदान में उपयोग में लाई जाती ह,ै िहां मुख्य भनरीिक-सह-सुभिधाकताष या िेत्रीय भनरीिक-सह-
सुभिधाकताष, यकद उनकी राय में ऐसे उपकरर्, उपस्कर, मशीनरी या सामिी के उपयोग से खदान में सरु िा को
खतरा होने की संिािना ह,ै तो भलभखत आदेश द्वारा उसके उपयोग पर तब तक रोक लगा सकते ह ैं जब तक कक
मुख्य भनरीिक-सह-सुभिधाकताष द्वारा उसे मंजरू ी न दे दी जाए।
(5) ककसी खान के माभलक, अभिकताष या प्रबंधक को ककसी अनुमोकदत प्रकार की मशीनरी, उपकरर्, तंत्र,
युभक्त, लैंप, लाइट या सामिी प्राप्त करते समय यह सुभनभित करना होगा कक िे सिी प्रकार स े अनुमोकदत
भिभनदेशों के अनुरूप ह ैं और अनुमोकदत मानक के अनुसार उनका रखरखाि करने की िी भजम्मेदारी होगी।
(6) प्रयोग में लाई जा रही प्रत्येक अनुमोकदत मशीनरी, उपकरर् और युभक्त के अनमु ोदन की एक प्रभत खान
कायाषलय में रखी जाएगी।
(7) जहां मशीनरी का प्रयोग हाि से पकड़ने िाली भिल के अलािा उठाने, खींचने, भिडलंग करने, िेंटटंग,
चीरने, काटने, लोि करने, ढोने या िंप करने के भलए ककया जाता ह,ै काय ष के तरीके के संबंध में प्रत्येक प्रकार
की मशीनरी के भलए अलग से आचार संभहता इंजीभनयर द्वारा प्रबंधक के परामशष से तैयार की जाएगी, भजसमें
ऐसी मशीनरी और सहायक उपकरर्ों के भनमाषर्, स्िापना, संचालन, मरम्मत, रखरखाि, हटाने और पररिहन
के भलए भनयोभजत व्यभक्तयों के भनयंत्रर् और मागषदशषन के भलए मानक संचालन प्रकक्रया शाभमल होगी और साि
ही दघु षटना की रोकिाम के भलए और इस प्रकार भनयोभजत व्यभक्तयों की सरु िा, स्िास््य, सुभिधा और
अनुशासन प्रदान करने के भलए और उद्देश्य के भलए अभधकृत इंजीभनयर उपरोक्त मानक संचालन प्रकक्रया के
कायाषन्ियन के भलए भजम्मेदार होगा।
(8) प्रत्येक मशीनरी की जांच खदान के माभलक या एजेन्ट द्वारा गरठत िेत्र में भिशेर्ज्ञता रखने िाली एक
सभमभत द्वारा की जाएगी, जो मशीनरी की हालत का आकलन करने के भलए तीन िर्ष में कम से कम एक बार
जांच करेगी ताकक यह तय ककया जा सके कक मशीनरी खदानों में आगे इस्तेमाल के भलए उपयुक्त ह ै या नहीं।
बशते कक अनकफट घोभर्त की गई मशीनरी को तब तक इस्तेमाल में नहीं लाया जाएगा, जब तक कक[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 151
बताई गई कभमटी द्वारा सुझाया गया मेंटेनेंस और मरम्मत न कर ली जाए और उसे इस्तेमाल के भलए कफट
घोभर्त न कर कदया जाए।
(9) ज़मीन के नीचे मशीनरी चलाने के भलए काम पर रखे गए या काम पर रखे जान े िाले सिी लोगों को ट्रेडनंग
दी जाएगी और उनकी काभबभलयत का मूल्यांकन मैनेजमटें द्वारा बनाई गई कमेटी करेगी, जो ऐसे लोग होंगे जो
ट्रेडनंग देने से जुड़े नहीं ह;ैं बशते कक ट्रेडनंग ऑकफसर को कमेटी में को-ऑप्ट ककया जा सके।
(10) खभनज प्रसंस्करर् संयंत्रों में लोगों को गमी, धूल, शोर आकद से बचाने के भलए ऑपरेटरों के भलए सीट के
साि उपयुक्त रूप से भिजाइन ककए गए केभबन की व्यिस्िा की जाएगी।
184. मशीनरी के भनमार्ष और रखरखाि के भलए सामान्य उपबधं ।- (1) खदान के इकक्वपमेंट के तौर पर
इस्तेमाल होने िाली या उसका भहस्सा बनने िाली सिी मशीनरी और उपकरर्ों के सिी पाट्सष और िर्किंग
भगयर, चाह े िे कफक्स्ि हों या मूिेबल, भजसमें एंकटरंग और कफडक्संग अप्लायंसेज शाभमल ह,ैं और सिी
फाउंिेशन भजनमें या भजनसे ऐसे कोई िी अप्लायंसेज एंकर या कफक्स ककए गए ह,ैं िे अच्छे भिजाइन, मजबूत
बनािट, सही मटीररयल, काफी मजबूती िाले और कदखन े िाले भिफेक्ट स े मुक्त होन े चाभहए और उनका ठीक स े
मेंटेनेंस ककया जाना चाभहए।
(2) (क) खदान पररसर के िीतर या खदान के समीप मशीनरी के भनमाषर्, संयोजन, रखरखाि, मरम्मत,
ओिरहॉल, भनराकरर् या रखरखाि से संबंभधत ककसी अन्य कायष से संबंभधत गभतभिभधयों को करन े के भलए
कायशष ाला म ें िहा ं कायरष त व्यभक्तयों की सरु िा सभु नभित करन े के भलए उभचत लआे उट होगा;
(ख) कायषशाला में भनम्नभलभखत सभु िधाएं होंगी-
(i) फशष पर सीमाकं न (िाहन या उपकरर्, पजु ों और सामभियों की आिाजाही के भलए) के
साि उभचत फश ष और शीर् ष पर पयाप्तष आिरर् भजसम ें स्पष्ट रूप स े भचह्नाकं कत खाभड़या ं हों;
(ii) पयाप्तष रोशनी और िायसु चं ार की व्यिस्िा;
(iii) पयाप्तष अभिशमन व्यिस्िा;
(iv) रंग कोि के साि पयाप्तष तले और स्नहे क ििं ारर् स्िान;
(v) बैटरी चार्जगिं कि, यकद आिश्यक हो;
(vi) अलग िडे ल्िंग ब े जो पयाप्तष रूप स े सरं भित हों और ज्िलनशील सामिी स े दरू हों;
(vii) उपयोग ककए गए तले , कफल्टर, तले के टुकड़,े स्क्रैप और अन्य रखरखाि अपभशष्ट आकद के
सिं ह और भनपटान के भलए पयाप्तष व्यिस्िा
(viii) एचईएमएम एि ं अन्य िाहनों के भलए पिृ क रास्ता;
(ix) मालसचू ी के भलए ििं ारर्;
(x) एचईएमएम तिा अन्य िाहनों के भलए अलग पार्किंग;
(xi) उभचत रूप स े सीमाकं कत एि ं सरं भित टायर मद्रु ास्फीभत ित्रे ;
(xii) एचईएमएम धलु ाई ित्रे और भनरीिर् गड्ढा;
(xiii) पयाप्तष िमता की उठान े और िार सिं ालन े की व्यिस्िा
(xiv) व्यभक्त और मशीनरी की सरु िा स े ससु गं त कोई अन्य प्रािधान;
(xv) िारी भमट्टी हटान े िाली मशीनरी पर इस्तमे ाल होन े िाल े सड़क के अलािा (ओटीआर)
टायरों को हटान,े स्िापना और रखरखाि के दौरान मनै अु ल हिैं डलगं को खत्म करन े के भलए152 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
पयाप्तष िमता और आिश्यक सरु िा सभु िधाओं िाल े उपयक्तु प्रकार के टायर हिैं लर उपलब्ध
कराए जाएगं ;े
(xvi) िाहन म ें और सयं ोजन करत े समय हिा िरन े के भलए उपयक्तु सरु िात्मक डपजं रे;
(xvii) हर ऑक्सी-एभसरटलीन या दसू रे गसै िडे ल्िगं और कटटंग उपकरर् म ें भसलिें र रेगलु टे र के
दोनों भसरों और ऑक्सीजन और फ्यलू गसै लाइनों के भलए सप्लाई होज़ के ब्लोपाइप भसरों
पर अप्रव्ू ि फ्लशै बकै अरेस्टर लगाए जाएंग;े और
(xviii) इस्तमे ाल ककए जा रह े हर तले या लभु ब्रकेंट के भलए अलग रंग कोि या टैग स े पहचान े जान े
िाल े भिस्पडें सगं उपकरर्।
(3) जब किी मशीनरी के भनमार्ष , सयं ोजन, रख-रखाि, मरम्मत, ओिरहॉल, भियोजन आकद स े सबं भं धत
गभतभिभधया ं कायषशाला म ें करना उभचत रूप स े व्यिहाय ष न हो, तो िहा ं कायरष त व्यभक्तयों की सरु िा सभु नभित
करन े के भलए स्िान को उभचत तरीके स े घरे न े के पिात उपरोक्त गभतभिभधया ं साइट पर ही की जाएगं ी।
(4) जहां खभनज प्रसंस्करर् संयंत्र, मरम्मत शेि या कायशष ालाओं सभहत सतही पररिहन और हिैं डलंग मशीनरी
की व्यिस्िा की जाती ह,ै ऐसी मशीनरी, संयंत्र और सहायक उपकरर्ों के भनमाषर्, स्िापना, संचालन, मरम्मत,
रखरखाि, भिघटन और पररिहन के साि-साि दघु षटना की रोकिाम के भलए और इस प्रकार भनयोभजत
व्यभक्तयों की सरु िा, स्िास््य, सुभिधा और अनुशासन की व्यिस्िा करन े के भलए आचार संभहता प्रबंधक के
परामशष से एक इंजीभनयर द्वारा तैयार की जाएगी और इस प्रयोजन के भलए अभधकृत इंजीभनयर उपरोक्त
आचार संभहता के कायाषन्ियन के भलए भजम्मेदार होगा।
185. दबाि के अधीन उपकरर्। - (1) खदान के उपकरर् के तौर पर इस्तेमाल होने िाल े या उसका भहस्सा
बनने िाले सिी उपकरर्, भजनमें एटमोस्फेररक प्रेशर से ज़्यादा प्रेशर पर हिा, गैस या िाप होती ह ै या बनती
ह,ै उन्ह ें इस तरह भिज़ाइन, बनाया, इंस्टॉल और मेंटेन ककया जाएगा कक आग लगने, फटने, भिस्फोट या भगरन े
या नुकसानदायक गैसों के बनने का कोई खतरा न हो।
(2) संपीड़न संयंत्र का भहस्सा बनने िाले प्रत्येक िायु ररसीिर में एक सुरिा िाल्ि और एक िायु गेज
लगाया जाएगा जो िायुमंिलीय दबाि से अभधक दबाि दशाषता ह।ै
(3) एयर-ररसीिर को केस में लगाने या चालू करने से पहले, इंजीभनयर या इस काम के भलए
ऑिराइज़्ि कोई दसू रा सिम व्यभक्त इसे मैभक्समम परभमसेबल िर्किंग प्रेशर के कम से कम िेढ गुना प्रेशर पर
हाइिोभलक टेस्ट से गुज़रन े देगा और हर ररन्यूअल या ररपेयर के बाद और ककसी िी हालत में तीन साल से
ज़्यादा के गैप पर ऐसा ही टेस्ट ककया जाएगा। टेस्ट के दौरान ररसीिर की बची हुई लाइफ का पता लगाने के
भलए ररसीिर की दीिार की मोटाई मापी जाएगी।
(4) उप-भिभनयम (3) के अधीन ऐसे प्रत्येक परीिर् का पररर्ाम, इस प्रयोजन के भलए रखी गई
सभजल्दबि पृष्ठांककत पुभस्तका में या पुनः प्राभप्त योग्य तिा असंपादन योग्य इलैक्ट्रॉभनक रूप में दजष ककया
जाएगा, भजस पर परीिर् करने िाले व्यभक्त द्वारा भिभधित हस्तािर या ई-हस्तािर और कदनांक अंककत होगा
और इस प्रयोजन के भलए भनयुक्त इंजीभनयर द्वारा प्रभतहस्तािर ककया जाएगा।
(5) एयर कम्प्रेशरों के भलए हिा की आपूर्तष धूल और धुएं से मुक्त स्रोत से ली जाएगी।
(6) ककसी खदान में उपकरर् के िाग के रूप में उपयोग ककये जाने िाले या बनान े िाले सिी उपकरर्,
भजनमें दबाि के अधीन हाइिोभलक द्रि या पायस होता ह ै या उत्पन्न होता ह,ै को इस प्रकार से भिजाइन,
भनर्मषत, स्िाभपत और अनरु भित ककया जाएगा ताकक फटने और आग लगन े का कोई खतरा न रह।े[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 153
186. मशीनरी के चलन े िाल े भहस्सों के बारे म ें सािधाभनया।ं - (1) हर डिंच या डिंि-लास के साि एक स्टॉपर,
पंजा या दसू रा िरोसेमंद होल्िर कदया जाएगा और उसका इस्तेमाल ककया जाएगा।
(2) ककसी िी मशीनरी के हर िम, फ्लाई-व्हील और हर दसू रे खतरनाक खुले भहस्से को, जो खदान के इकक्वपमेंट
के तौर पर इस्तेमाल होता ह ै या उसका भहस्सा बनता ह,ै खतरे से बचाने के भलए मज़बूत बनािट के सही गािष
से अच्छी तरह घरे ा जाएगा। जब मशीनरी के भहस्स े चल रह े हों या इस्तेमाल में हों, तो ऐसे गािष अपनी जगह
पर रखे जाएंगे। लेककन, अगर काफी सािधानी बरती जाए, तो ककसी िी जांच, एिजस्टमेंट या मरम्मत के भलए
उन्ह ें हटाया जा सकता ह।ै
(3) प्रिारी इंजीभनयर, पयिष ेिी अभधकाररयों तिा अन्य अभधकृत व्यभक्तयों का यह कतषव्य होगा कक िे सिी
सुरिा किचों को अच्छी हालत में तिा सही भस्िभत में उभचत ढंग से बनाए रखें।
(4) ककसी मशीनरी की मरम्मत, समायोजन, सफाई या स्नेहन के दौरान, यह दशाषने िाले उपयुक्त टैग कक
मशीनरी ऐसे सचं ालन के अधीन ह,ै उसके भनयंत्रर् उपकरर् के पास लगाए जाएंगे।
(5) कोई िी व्यभक्त चलती हुई मशीनरी की मरम्मत, समायोजन, सफाई या स्नहे न नहीं करेगा, जहां चोट
लगने का जोभखम हो।
(6) कोई िी व्यभक्त िाइडिंग बेल्ट या रस्सी को तब तक स्िानांतररत या समायोभजत नहीं करेगा, जब
तक कक इस प्रयोजन के भलए उभचत यांभत्रक उपकरर् उपलब्ध न कराया गया हो और उसका उपयोग न ककया
गया हो।
(7) चलती हुई मशीनरी के भनकट कोई िी व्यभक्त ढील े बाहरी कपड़े नहीं पहनेगा, तिा न ही उस े
पहनने की अनुमभत दी जाएगी।
(8) कोई िी अनभधकृत व्यभक्त ककसी इंजन कि में प्रिेश नहीं करेगा या ककसी िी तरह स े इंजन में हस्तिेप
नहीं करेगा।
187. इंजन रूम और उनके भनकास। - हर इंजन, मोटर, ट्रांसफॉमषर और बैटरी चार्जिंग रूम, और हर कमरा
भजसमें बहुत ज़्यादा ज्िलनशील चीज़ें रखी जाती ह,ैं उन्ह ें साफ़ रखा जाएगा, और उनमें कम से कम दो एभग्जट
होंगे, भजन्ह ें ठीक से मेंटेन ककया जाएगा और रुकािट स े मुक्त रखा जाएगा।
188. मशीनरी का सचं ालन और परीिर्।- (1) कोई िी मशीनरी ककसी सिम व्यभक्त द्वारा या उसके सतत
पयषिेिर् के अधीन ही चलाई जाएगी।
(2) ककसी िी मशीनरी, उपकरर् या अप्लायंस का इंचाजष हर व्यभक्त काम शुरू करन े से पहले यह देखेगा
कक िह ठीक से काम कर रहा ह;ै और अगर उसे उसमें कोई खराबी कदखे, तो िह तरु ंत मैनेजर, इंजीभनयर या
ककसी दसू रे सिम व्यभक्त को इसकी जानकारी देगा।
(3) िायु ररसीिर का प्रत्येक प्रिारी व्यभक्त यह देखेगा कक सरु िा िाल्िों पर कोई अभतररक्त िार न िाला
जाए और िायु का अनुमेय दबाि पार न हो।
(4) इस प्रयोजन के भलए भनयुक्त एक अभधकारी या सिम व्यभक्त कम से कम प्रत्येक सात कदन में एक बार
प्रयोग में लाई जा रही िारी भमट्टी हटाने िाली मशीनरी और संयंत्र सभहत मशीनरी का संपूर्ष भनरीिर् करेगा
और उसके पररर्ाम को इस प्रयोजन के भलए रखी गई सभजल्द पृष्ठबि पुस्तक में या पुनप्राषभप्त योग्य तिा
असंपादन योग्य इलेक्ट्राभनक रूप में दजष करेगा।
(5) भिद्युत मशीनरी और संयंत्र के संबंध में, सिम व्यभक्त केंद्रीय भिद्युत प्राभधकरर् (सुरिा और भिद्युत
आपूर्तष से संबंभधत उपाय) भिभनयम, 2023 में भनर्दषष्ट योग्यताएं रखने िाला इंजीभनयर या इलेभक्ट्रभशयन
होगा।154 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
189. िभू मगत खदान म े इस्तमे ाल होन े िाल े उपकरर्, भजसम ें कंटीन्यअू स माइडनगं और कटटंग मशीन ें शाभमल
ह।ैं - (1) ज़मीन के नीच े मेटल िाली खदानों में इस्तेमाल होन े िाले सिी सेल्फ-प्रोपेल्ि फेस इकक्वपमेंट में
मज़बूती से बनी कैनोपी या कैब लगी होंगी, जो इस तरह से लगी और लगाई जाएंगी कक जब ऑपरेटर ऐस े
इकक्वपमेंट के ऑपरेटटंग कंट्रोल में हो, तो व्यभक्त छत, फेस या साइि से भगरने स े सुरभित रह।े
(2) प्रत्येक खदान में, भजस पर भिभनयमन 153 लागू होता ह,ै सिी छत बोडल्टंग मशीनों, काटन े की
मशीनों, लोडिंग मशीनों और खभनज भनकालन े या लोि करन े के भलए इस्तेमाल ककए जान े िाले अन्य
मशीनीकृत उपकरर्ों पर मीिेन मॉभनटर लगाए जाएंगे।
(3) छत के सहारे के भलए खभनजों को काटन े या छेद भिल करन े के भलए इस्तेमाल ककए जाने िाल े सिी
उपकरर्ों म ें कायस्ष िल को प्रकाभशत करन े के भलए पयाप्तष रोशनी की व्यिस्िा होनी चाभहए।
(4) छत के सहारे के भलए खभनजों को काटने या छेद भिल करने में इस्तेमाल ककए जाने िाले सिी उपकरर्,
सांस लने े योग्य खदान की धलू को भनयभं त्रत करने के भलए पानी के स्प्रे, धूल कलेक्टर और एयर-स्क्रबर प्रर्ाली
जैसे इंजीभनयटरंग भनयंत्रर्ों से लैस होंगे।
(5) जहां िूभमगत धातुयुक्त खानों में ररमोट कंट्रोल उपकरर्ों का उपयोग ककया जाता ह,ै िहां माभलक,
अभिकताष और प्रबंधक यह सभु नभित करेंगे कक-
(क) ररमोट से भनयंभत्रत उपकरर्ों का परीिर् करके यह सभु नभित ककया जा सके कक िे सिी अलग-
अलग आिृभत्तयों पर ह ैं और गलती से ऐसी मशीन को सकक्रय या स्िानातं ररत नहीं करेंगे भजस े
जानबूझकर संचाभलत नहीं ककया गया ह;ै
(ख) ररमोट कंट्रोल भििाइस के इस्तेमाल पर सिी ऑपरेटरों को सही ट्रेडनंग दी जाए; और
(ग) ररमोट कंट्रोल माइडनंग इकक्वपमेंट के इस्तेमाल के भलए एक माइडनंग स्कीम का भिज़ाइन बनाना,
भजसमें मशीन ऑपरेटर और इलाके के दसू रे िकषर के भलए सुरभित जगह शाभमल हो, ताकक
मशीन के चलने के दौरान क्रडशंग एक्सीिेंट को रोका जा सके, और सासं लने े िाली धूल और
शोर के खतरे से िी बचाया जा सके।
(6) खान में उपयोग की जाने िाली प्रत्येक िभू मगत चलती मशीनरी में ऐसे सरु िा फीचर या उपकरर् लगाए
जाएंगे, भजन्ह ें मुख्य भनरीिक-सह-सुभिधा प्रदाता समय-समय पर सामान्य आदेश द्वारा भनर्दषष्ट करें।
190. क्रेन और भलडफ्टंग भगयर।- (1) उपकरर् और सामिी को उठाने या पररिहन करने के भलए उपयोग
की जाने िाली सिी मशीनरी को भनमाषता द्वारा भनर्दषष्ट अनुसार भिजाइन, भनमाषर्, स्िाभपत, भनरीिर्,
रखरखाि और सचं ालन ककया जाएगा।
(2) क्रेन, होइस्ट, िैब या डिंच की रेटेि कैपेभसटी या पढने लायक लोि चाटष, जहाँ ज़रूरी हो, स्ट्रक्चर पर
साफ़ कदखने िाली जगह पर हमेशा के भलए माकष ककया जाएगा और ककसी िी हालत में, ऐसी मशीनरी को रेटेि
भलभमट से ज़्यादा कैपेभसटी पर नहीं चलाया जाएगा।
(3) कोई िी व्यभक्त ककसी क्रेन, िैब या डिंच पर सेफ़ िर्किंग लोि से ज़्यादा लोि नहीं िालेगा, भसिाय टेस्ट
के, जो ककसी ऑिराइज़्ि व्यभक्त द्वारा और भसफ़ष मैन्युफ़ैक्चरर द्वारा बताए गए तरीके स े ककया जाएगा।
(4) होइस्ट की भनधाषररत िमता होइस्ट को सहारा दने े िाली संरचना की िमता से अभधक नहीं होगी।
(5) इंजीभनयर या अन्य सिम व्यभक्त सिी क्रेनों और उत्तोलकों का भनयभमत रूप से भनरीिर् तिा रख-
रखाि करेंगे ताकक यह सुभनभित हो सके कक उनका प्रत्यके घटक अपना मूल रूप से भिजाइन ककया गया काय ष
करने में सिम ह,ै जो इसका एक अभिलेख िी रखेंगे, भजस पर उनके द्वारा भिभधित हस्तािर या ई-हस्तािर
तिा कदनाकं अंककत होगा।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 155
(6) ककसी क्रेन या होइस्ट का इस्तेमाल तब तक नहीं ककया जाएगा जब तक कक ककसी व्यभक्त की सुरिा को
खतरा पैदा करने िाली ककसी भस्िभत का समाधान नहीं हो जाता।
(7) िार िहन करन े िाले उपकरर्ों की सिी स्िापनाएं, पररितषन और मरम्मत मूल भिजाइन और
सुरिा मानक के अनुसार ककसी सिम व्यभक्त या अभधकृत संगठन द्वारा प्रमाभर्त की जाएंगी।
(8) ऊध्िाषधर तल में चलने योग्य बूम िाली सिी क्रेन या होइस्ट-
(क) एक ऐसा भििाइस हो भजसे ऑपरेटर साफ़-साफ़ पढ सके, ताकक अगर रेटेि कैपेभसटी पर असर
पड़े तो बूम एंगल का पता चल सके; और
(ख) इसमें एक ऑटोमैरटक लोि इंभिकेटर लगा होना चाभहए जो सेफ़ िर्किंग लोि और ओिरलोि
िॉर्निंग भििाइस कदखाता हो।
(9) क्रेन या होइस्ट की रेटेि िमता को प्रिाभित करने िाले सिी संशोधनों का मूल्यांकन ककया जाएगा,
और रेटेि िमता को मूल उपकरर् भनमाषता या सिम व्यभक्त या अभधकृत संगठन द्वारा समायोभजत ककया
जाएगा।
(10) सिी क्रेनों और हॉइस्टों के भलए प्रचालक के स्िान तिा रखरखाि स्िानों तक पहुचं और भनकास का
सुरभित साधन होगा।
(11) यकद ऑपरेटर के भलए बाहर भनकलने का सामान्य साधन हमेशा उपलब्ध नहीं हो, तो भबजली की
भिफलता या अन्य आपात भस्िभत की भस्िभत में पररचालन भस्िभत से सुरभित िेत्र में जाने के भलए एक िैकभल्पक
सुरभित साधन प्रदान ककया जाएगा।
(12) प्रिािी श्रव्य और दश्ृ य संचार उपकरर् क्रेन या होइस्ट पर स्िाभपत ककए जाएंगे।
(13) जब कमषचाररयों को सचेत करना आिश्यक हो, तो क्रेन या होइस्ट संचालक चेतािनी संकेत बजाएगा।
(14) क्रेन या होइस्ट पर सिी भनयंत्रर् स्पष्ट रूप से पहचाने जाने चाभहए और छोड़े जान े पर िे न्यूट्रल पर
िापस आ जाएंगे और एक स्िचाभलत ब्रेककंग भसस्टम सकक्रय हो जाएगा।
(15) क्रेन या होइस्ट के संचालक को िायुजभनत प्रदर्ू कों, भगरती या उड़ती िस्तुओं तिा अत्यभधक गमी या
ठंि जैसी खतरनाक पररभस्िभतयों से बचाया जाएगा।
(16) क्रेन या होइस्ट पर ऑपरेटर की सीट एगोनोभमक भिजाइन की होगी जो ऑपरेटर को उपकरर् को
सुरभित रूप स े संचाभलत करने की अनुमभत दे।
(17) सिी हुक, हुक गािष या कुंिी, तार रस्सी, चेन और अन्य अनुलिक और कफटटंग का भनयभमत आधार पर
रखरखाि और भनरीिर् ककया जाएगा।
(18) क्रेन या हॉइस्ट का संचालक प्रत्येक भशफ्ट के आरंि में जांच करेगा और भलभमट भस्िच का परीिर्
करेगा तिा इसकी एक ररपोटष रखी जाएगी।
(19) क्रेनों के भलए पररिहन मागष अिरोधों स े मुक्त होगा तिा पभहएदार अििा ट्रैक िाली क्रेनों के भलए
पररिहन मागष जहा ं तक संिि हो, समतल होगा।
(20) क्रेन तिा ररडगंग लोि का उभचत और सरु भित संचालन सुभनभित करन े के भलए क्रेन सचं ालकों को
प्रभशिर् कदया जाएगा।
(21) कोई िी ऑपरेटर लोि लटका होन े पर क्रेन या होइस्ट को अकेला नहीं छोड़ेगा।
(22) कोई िी क्रेन ओिरहिे लाइनों के आस-पास तब तक काम नहीं करेगी जब तक इलेभक्ट्रकल सुपरिाइज़र स े
कोई खास "काम करने का परभमट" न भमल जाए, भजसस े यह पक्का हो जाए कक लाइन या तो िी-एनजाषइज़्ि ह ै
या खास कफभजकल बैररयर (गार्ििंग) लगाए गए ह।ैं (23) कोई िी व्यभक्त लटके हुए लोि के नीचे या क्रेन के
घूमने िाले सुपरस्ट्रक्चर के डस्िंग रेभियस के अंदर खड़ा नहीं होगा, न ही उससे गुज़रेगा, और न ही काम करेगा;156 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
और भबना इजाज़त के ककसी के आने-जाने को रोकने के भलए क्रेन के डस्िंग रेभियस को घेरने के भलए सही
बैररयर या िॉर्निंग टेप का इस्तेमाल ककया जाएगा।
191. ट्रक, रटपर और िपं र समते हिे ी अिष मडू िगं मशीनरी (HEMMs) का भिज़ाइन, ऑपरेशन और मटें ेनसें । -
(1) हर हिे ी अिष मूडिंग मशीनरी (HEMM) भजसम ें ट्रक, रटपर और िपं र या कोई दसू री मशीनरी शाभमल ह,ै
भजस े मख्ु य भनरीिक-सह- सभु िधाकता ष , जनरल या स्पशे ल आदशे स े बता सकता ह,ै उस े इस तरह भिज़ाइन
ककया जाएगा कक ऑपरेटर को चारों ओर साफ़ और भबना रुकािट देखने को भमले।
(2) खदान में प्रयुक्त होने िाल े प्रत्येक िारी भमट्टी हटाने िाली मशीनरी, भजसमें ट्रक, रटपर और िम्पर िी
शाभमल ह,ैं में ऐसे सुरिा फीचर या उपकरर् लगाए जाएंगे, भजन्ह ें मुख्य भनरीिक-सह-सुभिधाप्रदाता समय-
समय पर सामान्य आदेश द्वारा भनर्दषष्ट करें।
(3) जल स्रोतों के भलए ट्यूबिेल भिडलंग के भलए भिजाइन की गई ट्रक माउंटेि भिल मशीनों का उपयोग
भिस्फोट उद्देश्य के भलए छेद भिल करने के भलए नहीं ककया जाएगा और केिल उभचत प्रकार की ब्लास्ट होल
भिल मशीन, भिशेर् रूप से खनन उद्देश्य के भलए भिजाइन की गई, का ही खदान में उपयोग ककया जाएगा।
(4) प्रत्येक िारी भमट्टी हटाने िाली मशीनरी, प्रबधं क द्वारा भलभखत रूप म ें ऑपरेटर के रूप म ें अभधकृत एक
सिम व्यभक्त के प्रिार के अधीन होगी ।
(5) िारी भमट्टी हटाने िाली मशीनरी चलाने के भलए भनयुक्त या भनयुक्त ककए जान े िाले सिी व्यभक्तयों को
प्रभशभित ककया जाएगा और उनकी योग्यता का मूल्यांकन प्रबंधन द्वारा गरठत सभमभत द्वारा ककया जाएगा ,
जो ऐसे व्यभक्त होंगे जो प्रभशिर् देने से जुड़े नहीं ह:ैं
बशते कक ट्रेडनंग ऑकफसर को कभमटी में ऑब्ज़िषर के तौर पर को-ऑप्ट ककया जा सके।
(6) केिल ऐसे कफटर या मैकेभनक भजनके पास ऑपरेटर का प्राभधकरर् ह ै , को ही िारी भमट्टी हटाने िाली
मशीनरी का परीिर् करन े की अनुमभत दी जाएगी।
(7) ऑपरेटर या मैनेजर या मैनजे र द्वारा भलभखत रूप में अभधकृत ककसी अन्य व्यभक्त के अलािा ककसी अन्य
व्यभक्त को िारी भमट्टी हटाने िाली मशीनरी पर सिारी करने की अनुमभत नहीं दी जाएगी।
(8) ब्रेक परीिर् के भलए भचभन्हत िेत्र को पयाषप्त रूप से घेराि कर रखा जाएगा।
(9) खलु ी खदानों म ें ईंधन िरन े का काय ष भिशर्े रूप स े भनर्दष्टष भस्िर ईंधन िरन े िाल े स्टेशनों तक ही सीभमत
रहगे ा।
बशत े कक ईंधन िरन े के भलए मोबाइल ईंधन बोजर का इस्तमे ाल मख्ु य भनरीिक-सह-सभु िधाकता ष द्वारा
सामान्य आदशे द्वारा भनर्दष्टष शतों के अनसु ार ककया जाएगा।
192. सामान्य सािधाभनया।ं - (1) खान के काम म ें इस्तेमाल होने िाली सिी मशीन ें और प्लांट अच्छे भिज़ाइन,
मज़बूत बनािट, सही मटीररयल, काफ़ी मज़बतू ी, भबना ककसी खराबी के और ठीक से रख रखाि ककए हुए होन े
चाभहए।
(2) माभलक, अभिकताष और प्रबंधक पयाषप्त प्रभशिर् सुभिधाएं उपलब्ध कराएंगे तिा मशीनरी तिा संयंत्र के
संचालन तिा रख-रखाि के भलए भनयोभजत व्यभक्तयों का उभचत प्रभशिर् सुभनभित करेंगे।
(3) इंजीभनयर या उसकी देख-रेख में कायषरत अन्य सिम व्यभक्त के अभतररक्त कोई िी व्यभक्त, मशीनरी या
संयंत्र पर ऐसा कोई कायष नहीं करेगा भजसमें तकनीकी ज्ञान या अनुिि की आिश्यकता हो।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 157
अध्याय XV
भमभश्रत
193. बाड़ लगाना। - (1) ककसी खदान म ें या उसके आस-पास हर टैंक या तालाब या कोई दसू री खतरनाक
जगह, जो माइडनगं ऑपरेशन के नतीज े म ें बनी ह ै या उसके भसलभसल े म ें इस्तमे ाल होती ह,ै उस े सरु भित रूप स े
बाड़ लगाकर रखा जाएगा।
(2) सतह पर खड़ी की गई प्रत्यके बाड़ की, कम स े कम प्रत्यके सात कदन म ें एक बार, ककसी सिम व्यभक्त
द्वारा जाचँ की जाएगी और ऐस े प्रत्यके भनरीिर् की ररपोटष, इस प्रयोजन के भलए रखी गई सभजल्दबि पष्ठृ
पभु स्तका म ें या पुनःप्राभप्त योग्य तिा असंपादन योग्य इलेक्ट्रॉभनक रूप में , जाचँ करन े िाल े व्यभक्त द्वारा
भिभधित हस्तािररत या ई-हस्तािररत तिा कदनांककत दजष की जाएगी।
(3) यकद पयाषप्त सािधानी बरती जाए तो ककसी िी बाड़, गेट या बैररकेि को मरम्मत या अन्य संचालन के
उद्देश्य से अस्िायी रूप से हटाया जा सकता ह।ै
(4) यकद इस बारे में कोई संदेह उत्पन्न होता ह ै कक क्या इस भिभनयमन के तहत प्रदान की गई कोई बाड़,
गािष, बाधा या गेट पयाषप्त, उभचत या सुरभित ह,ै या इस बारे में कक क्या उप-भिभनयमन (3) के तहत बरती गई
सािधाभनयां पयाषप्त ह,ैं तो इसे भनर्षय के भलए मुख्य भनरीिक-सह-सुभिधाकताष को िजे ा जाएगा।
194. सामान्य सरु िा।- (1) कोई िी व्यभक्त खदान म ें लापरिाही स े या जानबझू कर ऐसा कुछ नहीं करेगा
भजसस े जान या अगं को खतरा हो, या खदान या उसम ें काम करन े िाल े लोगों की सरु िा के भलए ज़रूरी कोई
िी काम लापरिाही स े या जानबझू कर न करे।
(2) कोई िी व्यभक्त, ककसी अभधकारी के प्राभधकार के भबना, ककसी बाड़, अिरोधक या द्वार को नहीं हटाएगा या
उससे होकर नहीं गुज़रेगा, अििा ककसी खतरे के संकेत को नहीं हटाएगा या उसस े होकर नहीं गुज़रेगा।
(3) ककसी अभधकारी द्वारा कदए गए भनदेशों के अधीन रहत े हुए, कोई िी व्यभक्त, ककसी न्यायोभचत उद्देश्य के
अलािा, खदान के उस िाग के अलािा ककसी अन्य िाग में नहीं जाएगा भजसम ें िह कायष करता ह,ै या
उभचत यात्रा मागष के अलािा ककसी अन्य सड़क मागष से अपने कायष स्िल पर नहीं आएगा या िहां से नहीं
आएगा।
(4) कोई िी व्यभक्त ड्यूटी के दौरान नहीं सोएगा।
(5) संभहता तिा इन भिभनयमों तिा इसके अधीन बनाए गए आदेशों के उपबंधों के अधीन रहते हुए, कोई िी
व्यभक्त अपनी पारी की अिभध से अभधक खदान में नहीं रहगे ा।
(6) कोई िी व्यभक्त ड्यूटी के दौरान नशे की हालत में नहीं रहगे ा।158 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(7) माभलक, अभिकताष और प्रबंधक शोर के स्तर को कम करने और काम करन े िाल े लोगों को शोर के संपकष में
आने स े बचाने के भलए कदम उठाएंगे।
(8) कोई िी व्यभक्त ऐसे िेत्र में उभचत कान की सरु िा के भबना काम नहीं करेगा या काम करने की अनुमभत नहीं
दी जाएगी जहां शोर का स्तर 90 िीबी(ए) के बराबर या उससे अभधक हो।
[dB(A) या A-िेटेि िभे सबल, इंसान के कान द्वारा सुनी गई आिाज़ों की ररलेरटि लाउिनेस का एक एक्सप्रेशन
ह।ै A-िेटटंग सुनन े की िमता में नुकसान और नॉइज़ पॉल्यूशन का पता लगान े का स्टैंििष ह।ै ]
(9) कोई िी व्यभक्त ऐसे िेत्र में प्रिेश नहीं करेगा या उसे प्रिेश करने की अनुमभत नहीं दी जाएगी जहां शोर का
स्तर 140 िीबी(ए) या उसस े अभधक हो।
(10) मुख्य भनरीिक-सह-सभु िधाप्रदाता, समय-समय पर अभधसूचना द्वारा, खान के ककसी िेत्र या स्िान म ें
अनुमेय ध्िभन जोभखम भिभनर्दषष्ट कर सकेगा।
(11) िह िेत्र, जहां शोर का स्तर 90 िीबी (ए) स े अभधक ह,ै स्पष्ट रूप स े भचभह्नत ककया जाएगा।
(12) माभलक, अभिकताष और प्रबंधक यह सुभनभित करेंगे कक कायष िेत्रों में िेत्र ध्िभन मानभचत्रर् ककया जाए
और 85 िीबी(ए) से अभधक शोर स्तर के संपकष में आने िाले काम करने िाल े व्यभक्तयों के भलए व्यभक्तगत शोर
िोभसमेट्री मुख्य भनरीिक-सह-सुभिधाकता ष द्वारा सामान्य या भिशेर् आदेश द्वारा समय-समय पर जारी की गई
प्रकक्रया के अनुसार की जाए।
(13) माभलक, अभिकताष या प्रबंधक अपने कमषचाररयों के भलए कंपन के जोभखम को खत्म करने या न्यूनतम
करने के भलए आिश्यक कदम उठाएंगे, ताकक जोभखम सीभमत रह;े
(i) हाि बाँह कंपन (HAV):
(क) दैभनक ELV 5 मीटर/सेकेंि2 ए(8);
(ख) दैभनक ELV 2.5 मीटर/सेकेंि2 ए(8);
(ii) संपूर्ष शरीर कंपन:
a) कंपन की माप के दौरान देख े गए भशखा कारक 9 से कम होन े की भस्िभत में, दैभनक ELV
1.15 m/s2 A (8) और दैभनक EAV 0.5m/s2 A (8) ह,ै
b) कंपन की माप के दौरान देख े गए भशखर कारक के मामल े में 9 से अभधक ह,ै[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 159
कंपन खुराक सीमा मान (VDLV) 8.5 मीटर/सेकंि1.75A(8) और कंपन खुराक सीमा मान (VDLV)
17 मीटर1.75 A(8)।
(14) माभलक, अभिकताष और प्रबंधक कायष प्रकक्रया और कायष स्टेशन को उपयुक्त रूप से भिजाइन करके और
उभचत और ठीक स े काम करने िाल े कायष उपकरर् का चयन करके भनिारक उपाय को शाभमल करके कंपन के
जोभखम के स्तर को प्रिािी रूप स े कम करेंग े और साि ही काय ष भिभधयों और प्रकक्रयाओं को उपयुक्त रूप स े
संशोभधत करेंग े ताकक स्रोत पर जोभखम को कम ककया जा सके;
(क) खदान में काम करने िाल े मज़दरू ों की सुरिा और सेहत को बेहतर बनाने के भलए, िाइब्रेशन स े
जुड़ े खतरों के बारे में टेकिकल तरक्की और साइंरटकफक जानकारी को ध्यान में रखते हुए
बदलाि करना।
(ख) मुख्य भनरीिक-सह-सुभिधाकताष द्वारा भिशेर् या सामान्य आदेश द्वारा भनधाषररत और समय-
समय पर अभधसूभचत काय ष प्रिाओं के भलए भिभशष्ट यांभत्रक कंपन के जोभखम के स्तर का
आकलन करना।
(15) जहा ं ककसी स्िान पर धूम्रपान या अनभधकृत प्रिेश भनभर्ि ह,ै िहां इस आशय की सूचना उस स्िान के
प्रत्येक प्रिेश द्वार पर स्पष्ट स्िानों पर चस्पा की जाएगी।
(16) प्रत्येक खभनज िेडसंग या पृिक्करर् संयंत्र में जहां साइनाइि या अन्य जहरील े पदािष का उपयोग ककया
जाता ह,ै भिर्ाक्तता के भलए संतोर्जनक और प्रिािी मारक की पयाषप्त आपूर्त ष रखी जाएगी।
(17) जहरीले या हाभनकारक पदािष िाले पानी को भनलंबन या घोल के रूप में प्रिािी ढंग से बाड़बंदी की
जानी चाभहए, भजससे अनजाने में उस तक पहुचं को रोका जा सके और लोगों को ऐसे पानी का उपयोग न करन े
की चेतािनी देने के भलए उपयुक्त स्िानों पर नोरटस बोिष लगाए जाएंगे।
(18) ककसी िी भस्िभत में खतरनाक सान्द्रता िाले ककसी भिर्लै े पदािष के भनलम्बन या भिलयन िाले जल को
बाहर भनकलने की अनुमभत नहीं दी जाएगी।
(19) जब िी ककसी व्यभक्त को खान के माभलक, अभिकताष या प्रबंधक द्वारा कोई व्यभक्तगत सुरिात्मक उपकरर्
कदया जाता ह,ै तो िह ड्यूटी के दौरान उसका उपयोग करेगा।
195. बचाि िाल े जतू ों का इस्तमे ाल, सप्लाई और रखरखाि। - (1) कोई िी व्यभक्त ककसी खदान में तब तक
नहीं जाएगा, न काम करेगा, न उसे खदान में जाने या काम करन े की इजाज़त दी जाएगी, जब तक कक उसन े
ऐसे बचाि िाले जूत े न पहन े हों भजन्ह ें मुख्य भनरीिक सह सुभिधाकता ष आम या खास आदेश से मंज़ूर करे।160 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) उप-भनयम (1) में भनर्दषष्ट सुरिात्मक जूत े खान माभलक द्वारा भनःशुल्क उपलब्ध कराए जाएंगे।
196. हले मटे का प्रयोग और उसकी आपर्ू त।ष - (1) कोई िी व्यभक्त ककसी खदान में तब तक नहीं जाएगा, न
काम करेगा, न ही उसे खदान में जान े या काम करने की इजाज़त दी जाएगी, जब तक कक िह उस तरह का
हले मेट न पहने भजसे मुख्य भनरीिक सह सुभिधाकताष न े आम या खास आदेश से मंज़रू ी दी हो :
बशते कक जहां मुख्य भनरीिक -सह-सुभिधाकताष की राय ह ै कक भिशेर् पररभस्िभतयों के कारर्, ककसी
व्यभक्त या व्यभक्तयों के िगष के भलए खदान में जाने या काम करने के भलए हले मेट पहनना आिश्यक या उभचत
रूप से व्यािहाररक नहीं ह,ै जैसा कक भलभखत में सामान्य या भिशेर् आदेश द्वारा और उसमें भनर्दषष्ट ऐसी शतों के
अधीन भनर्दषष्ट ककया जा सकता ह,ै ऐसे व्यभक्त या व्यभक्तयों के िगष को इस उप-भनयमन के प्रािधानों के संचालन
से छूट दी जा सकती ह।ै
(2) उप-भनयम (1) में भनर्दषष्ट हले मेट खदान माभलक द्वारा भनःशुल्क उपलब्ध कराया जाएगा ।
197. अन्य भनजी सरं िात्म क उपकरर् की आपर्ू त.ष – - (1) अगर िेत्रीय भनरीिक सह सुभिधाकताष या मुख्य
भनरीिक सह सुभिधाकताष को लगता ह ै कक ककसी माइन में काम करन े िाला कोई व्यभक्त या लोगों का िुप अपन े
काम की िजह से बेिजह खतरे में ह ै , तो िह एक जनरल या स्पेशल आदेश से, माइन के माभलक, अभिकता ष या
मैनेजर से कह सकता ह ै कक िह ऐस े व्यभक्त या लोगों के िुप को फ्री में ग्लव्स, गॉगल्स, भशन गाड्सष, रेभस्परेटर,
रेट्रो ररफ्लेभक्टि जैकेट्स, फायर प्रोटेभक्टि जैकेट्स या ऐसे दसू रे प्रोटेभक्टि इकक्वपमेंट सप्लाई करे, जो आदेश में
बताए गए हों।
(2) उप-भनयम (1) के अंतगषत उपलब्ध कराए गए सुरिात्मक उपकरर् को माभलक, अभिकताष या प्रबंधक द्वारा
भनःशुल्क बदला जाएगा, जब किी िह िैध उपयोग के कारर् अनुपयोगी हो जाए।
बशते कक ककसी िी दसू री भस्िभत में, ररप्लेसमेंट पूरी कीमत चुकाने पर ककया जाएगा।
भनर्षय के भलए मुख्य भनरीिक -सह-सुभिधाकताष को िेजा जाएगा।
198. प्रबधं क और अन्य अभधकारी।-
खान में प्रबंधक या अभधकारी के रूप में तब तक भनयुक्त नहीं ककया जाएगा , जब तक कक;
(क) उसके पास सेंट जॉन एम्बुलेंस एसोभसएशन (इंभिया) या ककसी दसू रे फस्टष-एि ट्रेडनंग इंभस्टट्यूट का
िैभलि फस्टष-एि सर्टषकफकेट हो, जैसा कक बोिष ऑफ़ माइडनंग एग्जाभमनेशन बताए; और[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 161
(ख) उसे संभहता की धारा 72 के अन्तगषत भनधाषररत व्यािसाभयक प्रभशिर् के अन्तगषत ज्िाला सुरिा लैंपों
को संिालने, खान गैसों का पता लगाने तिा तत्संबंधी सािधानी बरतने का प्रभशिर् प्राप्त हो, भसिाय
तब के जब उसकी भनयुभक्त केिल खुली खदानों िाली खदानों तक ही सीभमत हो।
(2) ककसी व्यभक्त को भिभनयमन 25, भिभनयमन 67, भिभनयमन 97, भिभनयमन 127 के उप-भिभनयम (4) के
खंि (ए), भिभनयमन 128 के उप-भिभनयम (6), भिभनयमन 136 के उप-भिभनयम (3) के खंि (िी), भिभनयमन
144 के उप-भिभनयम (11), भिभनयमन 146 के उप-भिभनयम (3), भिभनयमन 150 और भिभनयमन 152 के
उप-भिभनयम (1) के अंतगषत तब तक सिम व्यभक्त के रूप में भनयुक्त नहीं ककया जाएगा, जब तक कक िह खनन
पयषिेिक प्रमार्पत्र या प्रबंधक प्रमार्पत्र का धारक न हो।
(3) ककसी व्यभक्त को भिभनयमन 122, भिभनयमन 123, भिभनयमन 126, भिभनयमन 131 के उप-
भिभनयमन (5) और (6), भिभनयमन 133, भिभनयमन 150 के उप-भिभनयमन (2), भिभनयमन 151 तिा
भिभनयमन 160 के उप-भिभनयमन (4) के अन्तगषत सिम व्यभक्त के रूप में तब तक भनयुक्त नहीं ककया जाएगा,
जब तक िह प्रबंधक प्रमार्पत्र, खनन पयषिेिक प्रमार्पत्र या सहायक खनन पयषिेिक प्रमार्पत्र का धारक न
हो।
(4) केिल खुली खदान िाल े खानों के मामले में, उप-भिभनयम (2) और (3) म ें कुछ िी भिभनयम 25,
भिभनयम 122, भिभनयम 123, भिभनयम 126, भिभनयम 127 के उप-भिभनयम (4), भिभनयम 128 के उप-
भिभनयम (6) और भिभनयम 175 के अंतगषत ककसी व्यभक्त की भनयुभक्त पर रोक नहीं लगाएगा , जो सहायक
खनन पयषिेिक प्रमार्पत्र, खनन पयषिेिक प्रमार्पत्र या प्रबंधक प्रमार्पत्र, जैसा िी मामला हो, केिल खुली
खदान िाले खानों तक सीभमत रखता हो।
(5) उप-भनयम (3) में भनभहत ककसी िी चीज के बािजूद, मुख्य भनरीिक-सह-सुभिधाकताष, जहाँ भिशेर्
भस्िभतयाँ मौजूद हों, ककसी िी व्यभक्त की भनयुभक्त की अनुमभत दे सकता ह ै या आिश्यकता बता सकता ह,ै
भजसके पास आिश्यक रूप से प्रबंधक का प्रमार् पत्र या खनन पयषिेिक का प्रमार् पत्र या सहायक खनन
पयषिेिक का प्रमार् पत्र नहीं ह,ै भिभनयमन 123 के तहत सिम व्यभक्त के रूप में, यकद ऐसे व्यभक्त के पास
कायषस्िलों के प्रिािी पयषिेिर् के भलए उपयुक्त योग्यता और अनुिि ह।ै
199. ररपोटष भलखना। - (1) अगर कोई व्यभक्त भजसे ररपोटष बनाने की ज़रूरत ह,ै िह भलख नहीं सकता ह,ै
तो मैनेजर द्वारा ऑिराइज़ ककया गया सिम व्यभक्त उसकी तरफ़ से और उसकी मौजूदगी में, कफ़भज़कल या
इलेक्ट्रॉभनक फ़ॉमष में ररपोटष भलखेगा, और सिम व्यभक्त द्वारा ररपोटष पढे जाने के बाद िह उस पर अपना अंगूठा
लगाएगा या साइन या ई- साइन करेगा ।
(2) ररपोटष भलखने िाला सिम व्यभक्त प्रमाभर्त करेगा कक इसे उस व्यभक्त को पढकर सुना कदया गया ह ै भजसके
भलए यह भलखी गई िी, और िह प्रमार्पत्र पर हस्तािर या ई-हस्तािर करेगा और अपने हस्तािर की तारीख
िालेगा।162 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
200. फीस का िगु तान - इन रेगुलेशंस के तहत पेमेंट होने िाली कोई िी फीस इलेक्ट्रॉभनक मोि या मुख्य
भनरीिक-सह- सुभिधाकता ष द्वारा समय-समय पर जनरल या स्पेशल आदेश से बताए गए ककसी दसू रे तरीके स े
पेमेंट की जाएगी ।
201. दघु टष ना स्ि ल पर फेर-बदल न ककया जाना.– - (1) जब िी ककसी माइन म ें या उसके आस-पास कोई
एक्सीिेंट होता ह,ै भजससे ककसी की जान चली जाती ह ै या उसे गंिीर चोट लगती ह,ै तो एक्सीिेंट की जगह को
मुख् य भनरीिक सह सुभिधाकताष या भनरीिक सह सभु िधाकताष, भजसे कोि के सेक्शन 10 के सब-सेक्शन (1) के
तहत एक्सीिेंट की सचू ना देना ज़रूरी ह,ै के आन े से पहले या उनकी सहमभत के भबना भिस्टबष या बदला नहीं
जाएगा , जब तक कक ऐसा भिस्टबष करना या बदलना ककसी और एक्सीिेंट को रोकने, मरन े िालों की बॉिी
हटाने, या ककसी व्यभक्त को खतरे स े बचाने के भलए ज़रूरी न हो, या जब तक कक एक्सीिेंट की जगह पर काम
बंद करने स े माइन के काम में गंिीर रुकािट न आए:
बशते कक जहां मुख्य भनरीिक -सह-सुभिधाकताष या उक्त भनरीिक -सह-सुभिधाकताष दघु षटना के समय स े
बहत्तर घंटे के िीतर दघु षटना स्िल का भनरीिर् करन े में भिफल रहता ह,ै तो दघु षटना स्िल पर काम कफर स े
शुरू ककया जा सकता ह।ै
(2) ककसी िी िजह से जानलेिा या गंिीर दघु षटना िाली जगह में कोई बदलाि होने या उसमें कोई गड़बड़ी
होने से पहले, दघु षटना िाली जगह का एक स्केच और उससे जुड़े सिी ब्यौरे दो कॉपी में तैयार ककए जाएंगे और
ऐसे स्केच पर मैनजे र या सहायक मैनजे र, सेफ्टी ऑकफसर, सिेयर और िकषमैन इंस्पेक्टर या, जहा ं िकषमनै
इंस्पेक्टर न हो, िहा ं दघु षटना की जगह पर मौजूद ककसी काम करने िाल े व्यभक्त के साइन होंगे, भजसके साि
दघु षटना की जगह के फोटो िी होंगे:
बशते कक, अगर स्केच तैयार होने स े पहले, आगे कोई हादसा रोकने या लोगों को खतरे से बचाने के भलए जगह
में कोई छेड़छाड़ की जाती ह ै या उसे बदला जाता ह,ै तो स्केच तुरंत तैयार ककया जाएगा, भजसमें जगह में कोई
छेड़छाड़ या बदलाि होने से पहले की सिी ज़रूरी जानकारी दी जाएगी।
(3) प्रमाभर्त रेखाभचत्रों में स े एक रेखाभचत्र संबंभधत िेत्रीय भनरीिक-सह-सुभिधाकताष को सौंप कदया
जाएगा या िेज कदया जाएगा।
(4) ऊपर बताए गए तरीके से मारे गए या गंिीर रूप से घायल हुए हर व्यभक्त के मामले में, माभलक,
अभिकताष या मैनेजर को मुख्य भनरीिक द्वारा बताए गए फॉमष और तरीके से, घटना के सात कदनों के अंदर, और
घायल व्यभक्त के ड्यूटी पर लौटने के पंद्रह कदनों के अंदर जानकारी िेजनी होगी।
202. आपातकालीन प्रभतकक्रया एि ं भनकासी योजना। - (1) हर माइन के माभलक, अभिकताष और मैनेजर के
पास एक पूरा प्रोिाम होगा ताकक िे हर माइन में होने िाली ककसी िी चोट, बीमारी या इमरजसें ी स े भनपट[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 163
सकें, भजसमें आने िाली इंिभस्ट्रयल और नेचुरल भिज़ास्टर िी शाभमल ह।ैं इसमें घायल लोगों का तुरंत फस्टष-एि
ट्रीटमेंट, मेभिकल ट्रीटमेंट, ट्रांसपोटेशन और इिैक्युएशन शाभमल होगा; माइन में होने िाली इमरजेंसी स े
भनपटने के तरीके; और माइन में फंसे या असमिष लोगों को बचाने का इंतज़ाम करना शाभमल होगा ।
(2) उप-भिभनयम (1) में भनर्दषष्ट योजना में खान भनकासी को शाभमल ककया जाएगा और इसमें भनम्नभलभखत
शाभमल होंग-े
(क) आपातकालीन प्रभतकक्रया को कायाषभन्ित करने के भलए पहचानी गई कारषिाइयों के प्रशासन के
भलए व्यभक्तगत भजम्मेदाररयों की स्िापना;
(ख) आपातकालीन सचं ार प्रर्ाभलयों की स्िापना, आपातकालीन संचार करने के भलए प्रकक्रयाएं तिा
व्यभक्तगत भजम्मेदाररयां;
(ग) आपातकाल से प्रिाभित सिी व्यभक्तयों को तुरंत सूचना प्रदान करने के भलए एक प्रर्ाली मौजूद
होगी, भजसमें ऐसे अलामष िी शाभमल होंगे भजन्ह ें प्रिाभित प्रत्येक व्यभक्त देख और सनु सकेगा;
(घ) खदान या खतरे िाल े िेत्र से व्यभक्तयों को सुरभित, व्यिभस्ित और तत्काल िापस भनकालन े की
अनुमभत देने की प्रकक्रया, भजसमें आपातकालीन भनकास मागों और प्रकक्रयाओं पर प्रभशिर्
शाभमल ह;ै
(ङ) ज़रूरी काम करने िाल े िकषसष को भनकलने स े पहले जो प्रोसेस फॉलो करन े होंगे, उनमें ये शाभमल
ह:ैं -
(i) केिल उन कार्मषकों का चयन, भजन्ह ें महत्िपूर्ष पररचालनों और खदान आपात भस्िभतयों,
भजसमें खदान में आग लगना और भिस्फोट शाभमल ह,ैं से भनपटने के भलए भिशेर् प्रभशिर्
प्राप्त हुआ हो;
(ii) ऐसी प्रकक्रयाएं लाग ू करना जो यह सुभनभित करें कक ऐसे स्िान उन लोगों के भलए सुरभित
ह ैं भजन्ह ें तुरंत िापस नहीं बुलाया जाएगा;
(iii) कार्मषकों को आिश्यक गैस-पहचान उपकरर्ों और अन्य उपकरर्ों या औजारों स े लैस
करना जो महत्िपूर्ष संचालन का जिाब देने के भलए आिश्यक ह;ैं
(च) भिशेर् जोभखम िाले व्यभक्तयों को बच भनकलने के भलए आिश्यक उपकरर्, जैसे स्ि-भनभहत स्ि-
श्वास उपकरर् आकद उपलब्ध कराना;
(छ) एक प्रभतकक्रया दल जो प्रभशभित एिं सुसभित हो तिा आग या अन्य खतरों, जो खदान में आपात
भस्िभत उत्पन्न करत े ह,ैं का जिाब देने के भलए तत्काल उपलब्ध हो;
(ज) आपातकालीन भनकासी पूरी होने के बाद सिी श्रभमकों का लेखा-जोखा रखने की प्रकक्रया;164 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(झ) सिी स्तरों पर सिी कर्मयष ों को प्रासंभगक जानकारी और प्रभशिर् प्रदान करना, भजसमें
आपातकालीन रोकिाम, तयै ारी और प्रभतकक्रया प्रकक्रयाओं में भनयभमत अभ्यास और आिभधक
आपातकालीन अभ्यास शाभमल ह;ै
(ञ) भनयभमत अंतराल पर मॉक ररहसषल।
(3) शरर् कि-
(i) हर िूभमगत खदान में ठीक स े बन े और सही जगह पर, काफ़ी कैपेभसटी िाल े ररफ्यूज चैंबर कदए जाएंगे,
ताकक आग, धमाके, छत भगरने, या सासं न लेन े लायक माहौल में, जहां से तुरंत भनकलना मुमककन न हो, िहा ं
ज़मीन के नीचे काम करने िाले लोगों के भलए आसानी से पहुचं सकें।
(ii) प्रत्येक शरर् कि िायुरोधी होगा और स्ितंत्र सासं लेने योग्य हिा की आपूर्तष, काबषन िाइऑक्साइि
स्क्रडबंग व्यिस्िा, सतह के साि संचार के साधन, रोशनी, प्रािभमक भचककत्सा सुभिधाएं और बचाि तक जीिन
को बनाए रखने के भलए पयाषप्त पीने योग्य पानी से ससु भित होगा।
(iii) माभलक, अभिकताष या प्रबंधक आपातकालीन भनकासी और प्रभतकक्रया योजना म ें शरर् कि के स्िानों और
प्रकक्रयाओं का भनयभमत भनरीिर्, रखरखाि और समािेशन सुभनभित करेंगे।
(4) माभलक, अभिकता ष और प्रबंधक आपातकालीन प्रभतकक्रया तिा भनकासी योजना की एक प्रभत िेत्रीय
भनरीिक -सह-सुभिधाकताष को प्रस्तुत करेंगे , जो भलभखत आदेश द्वारा ऐसी कायष योजना को, प्रस्तुत ककए गए
प्रपत्र में या ऐसे पररिधषन और पररितषनों के साि, जैसा िह ठीक समझे, अनुमोकदत कर सकेगा और इस प्रकार
अनुमोकदत कायष योजना को खदान में लागू ककया जाएगा।
(5) ककसी आपातकाल की सूचना भमलने पर माभलक, अभिकताष और प्रबंधक तिा उनकी अनुपभस्िभत म ें
सतह पर उपभस्ित प्रमुख अभधकारी तत्काल आपातकालीन कायष योजना को लागू करेंगे।
203. खदान स े सपैं ल लने ा। - जहा ं ऑकफभशयल कामों के भलए, कोई भनरीिक सह सभु िधाकता ष ककसी भमनरल,
खदान की हिा, भिस्फ ोटक मटीररयल, रस्सी, इकक्वपमेंट, मशीनरी या उसके ककसी भहस्से या ककसी दसू री चीज़
के सैंपल लेना ज़रूरी समझता ह,ै तो माभलक, अभिकताष या मनै ेजर उस े उतनी मात्रा म ें सपैं ल दगे ा भजतनी
ज़रूरत हो ।
204. द्वारा ित्रे ीय भनरीिक-सह-सभु िधाकता ष की शभक्तयों का प्रयोग करना।- इन भिभनयमों के अतं गतष ित्रे ीय
भनरीिक-सह-सुभिधाकताष को प्रदत्त कोई शभक्त मुख्य भनरीिक -सह-सुभिधाकता ष या मुख्य भनरीिक-सह-[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 165
सभु िधाकता ष द्वारा इस भनभमत्त भलभखत रूप म ें अभधकृत ककसी अन्य भनरीिक -सह-सुभिधाकताष द्वारा प्रयोग की
जा सकेगी ।
205. प्लान, सक्े शन और ररकॉि।ष - जहाँ खास हालात हों, िहा ँ मुख्य भनरीिक-सह- सुभिधाकता ष इन रेगुलेशन
के भनयमों के तहत ज़रूरी प्लान, सेक्शन और ररकॉिष को तैयार करने और मेंटेन करने की इजाज़त दे सकता ह,ै
जो बताई गई शतों के तहत, रेगुलेशन 56 के सब-रेगुलेशन (3) में बताए गए सिे और प्लॉटटंग की गलती की
भलभमट के अंदर इलेक्ट्रॉभनक फ़ॉमष में हो।
206. ररपोटष, ररकॉि ष और रभजस्टर। - इन रेगुलेशंस के तहत मेंटेन की जान े िाली ररपोटष, ररकॉि ष और रभजस्टर,
संबंभधत मकसद के भलए रखे गए इंटरलीव्ि बाउंि पेज्ि रभजस्टर में मेंटेन ककए जाएंगे और उन पर संबंभधत
सिम व्यभक्त या अभधकारी, जैसा िी हो, साइन ककए जाएंगे और मैनेजर काउंटर साइन करेंगे:
बशते कक ररपोटष, ररकॉिष और रभजस्टरों के इलेक्ट्रॉभनक रूप में रखरखाि के मामले में, माभलक, अभिकताष और
प्रबंधक यह सुभनभित करेंगे कक यह भिभजटल रूप में ह ै और इसमें कोई पररितषन या छेड़छाड़ नहीं की जा सकती
ह ै तिा इसे इस तरह स े सुरभित ककया गया ह,ै ताकक माभलक, अभिकता,ष प्रबंधक और मुख्य भनरीिक -सह-
सुभिधाकताष या भनरीिक -सह-सुभिधाकताष द्वारा इसे पुनः प्राप्त करना आसान हो सके :
आगे यह िी प्रािधान ह ै कक प्रबंधक ककसी सहायक प्रबंधक को उसकी ओर से ककसी ररपोटष, ररकॉिष या रभजस्टर
पर प्रभतहस्तािर करने के भलए अभधकृत कर सकता ह,ै भसिाय उन मामलों के जहां प्रबंधक को इन भनयमों के
तहत भिशेर् रूप से ककसी ररपोटष, ररकॉिष या रभजस्टर पर प्रभतहस्तािर करने की आिश्यकता होती ह।ै
207. मख्ु य भनरीिक-सह- सभु िधाकता ष के पास अपील।- (1) इन रेगुलेशन में से ककसी के तहत रीजनल
भनरीिक-सह- सुभिधाकताष द्वारा कदए गए आदेश के भखलाफ मुख्य भनरीिक-सह- सुभिधाकताष के पास अपील
की जा सकेगी, जो आदेश को कन्फमष, मॉभिफाई या कैंसल कर सकता ह।ै
(2) उप-भनयम (1) के अन्तगषत प्रत्येक अपील, आदेश प्राप्त होने के पन्द्रह कदनों के अन्दर व्यभित व्यभक्त द्वारा
प्रस्तुत की जायेगी।
208. केंद्र सरकार को अपील.- (1) इन भनयमों में से ककसी के तहत मुख्य भनरीिक-सह-सुभिधाकता ष द्वारा कदए
गए ककसी आदेश के भखलाफ या भनयम 207 के तहत पाररत ककसी आदेश के भखलाफ अपील, पीभड़त व्यभक्त
द्वारा या, जैसा िी मामला हो, आदेश की प्राभप्त के बीस कदनों के िीतर केंद्र सरकार को की जा सकेगी।
(2) मुख्य भनरीिक-सह-सभु िधाकताष के प्रत्येक आदेश, भजसके भिरुि उप-भनयम (1) के अधीन अपील की
गई ह,ै का अनुपालन केन्द्रीय सरकार का भनर्षय प्राप्त होन े तक ककया जाएगा:166 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
बशते कक केंद्र सरकार, अपील करन े िाले के आिेदन पर, अपील का भनपटारा होने तक, उस आदेश के लागू होन े
को सस्पेंि कर सकती ह ै भजसके भखलाफ अपील की गई ह।ै
209. भनरसन और व्यािभृ त्त.- (1) धातुयुक्त खान भिभनयम, 1961 इसके द्वारा भनरस्त ककये जाते ह।ैं
(2) उप-भनयम (1) में संदर्िषत भनरसन के बािजूद, इस प्रकार भनरस्त भिभनयमों के अंतगषत ककया गया कोई
कायष या की गई कोई कारषिाई, भजसमें जारी ककया गया कोई आदेश या प्रमार्पत्र, प्रदान ककया गया या
निीनीकृत ककया गया कोई प्राभधकरर् या परभमट, उसके अंतगषत कदया गया कोई आदेश या भनदेश या जारी की
गई अभधसूचना शाभमल ह,ै इन भिभनयमों के समतुल्य प्रािधानों के अंतगषत ककया गया, भलया गया, जारी ककया
गया, प्रदान ककया गया या निीनीकृत ककया गया या बनाया गया माना जाएगा।
(3) इन भिभनयमों के अंतगतष अंतर्िषष्ट ककसी बात के भसिाय, धातु खान भिभनयमन, 1961 के अंतगषत खान
फोरमैन, खनन मेट, िाइंडिंग इंजनमैन, बैंक्समैन या सहायक व्यभक्त के रूप में भनयुक्त कोई व्यभक्त, इन
भिभनयमों के अंतगषत क्रमश: खनन पयषिेिक, सहायक खनन पयषिेिक, िाइंडिंग इंजन ऑपरेटर, भपट टॉप
अटेंिेंट या सहायक व्यभक्त के रूप में िी भनयुक्त ककया गया माना जाएगा।[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 167
अनसु चू ी
[भिभनयम 56 का उप-भिभनयम (2) दखे ]ें
प्लान और सक्े शन तयै ार करन े के भलए कन्िशें न
भििरर् प्रतीक रटप्पर्ी
भनदशे ाकं रेखाए ँ काल े रंग म ें
खनन पट्टा की सीमा गहरे मैजेंटा रंग म ें
खदान की सीमा लाल
िाइक का बाहरी िाग िरू े रंग म ें
सतह का धंसना लाल
भनभर्ि खनन ित्रे
लाल
(क) सतह स े बोरहोल
लाल
(लंबित)
(ख) बोरहोल (झकु ा हुआ)
लाल
सतह स े
(ग) बोरहोल
(िभू मगत) लाल
(क) शाफ्ट काल े रंग म ें
(ख) पररत्यक्त शाफ्ट काल े रंग म ें168 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
भिन्ज़ े आकार के अनसु ार
खान म ें आन-े जान े का माग ष आकार के अनसु ार
पार कटौती काल े रंग म ें
स्तरों काल े रंग म ें
िभू मगत कायों का ऊध्िाधष र
काल े रंग म ें
प्रिपे र्
(क) पैक और रेत िरना काल े रंग म ें
(ख) अपभशष्ट चट्टान िरना
काल े रंग म ें
(ग) िने ाइट पकै दीिारें काल े रंग म ें
(क) दोर् तल हरे म ें
(ख) पग्े माटाइट घसु पठै
नील े रंग म ें[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 169
बाधं िरू े रंग म ें
अभं तम सििे र् की भतभि काल े रंग म ें
सििे र् स्टेशन काल े रंग म ें
बचें माकष काल े रंग म ें
(क) ईंट, पत्िर या कंक्रीट
िरें टलशे न स्टॉडपग्ं स काल े रंग म ें
(ख) िभै तज महु रें काल े रंग म ें
पाल लाल
(क) अभि बाधं या सील,
लाल
खलु े
(ख) अभि बाधं या सील बदं लाल
जल बाधं
नील े रंग म ें
(क) दरिाज े खलु े काल े रंग म ें
(ख) दरिाज े बदं
काल े रंग म ें
भनयामकों लाल170 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
हिाई क्रॉडसगं काल े रंग म ें
(क) िाय ु प्रिाह के प्रिशे की
नील े रंग म ें
कदशा
(ख) िापसी लाल
सहायक पंखा लाल
टेलीफोन हरे म ें
िभू मगत एम्बलु सें स्टेशन लाल
काल े रंग म ें
अभि शरर् कि
अंिरिाउंि पभत्रका लाल
पपं स्टेशन नील े रंग म ें
आउटक्रॉप रीफ, िने , लोि,
पील े रंग म ें
िगरै ह।
स्िायी स्टेशन
काल े रंग म ें
[फा. सं. एस-65025/03/2025-आईएसएच-II]
आलोक चंद्रा, िररष्ठ श्रम एि ं रोजगार सलाहकार[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 171
MINISTRY OF LABOUR AND EMPLOYMENT
NOTIFICATION
New Delhi, the 4th February, 2026
G.S.R. 109(E).—The following regulations, which the Central Government proposes to
make in exercise of powers conferred by Sections 136 of the Occupational Safety, Health and
Working Conditions Code, 2020 (37 of 2020) are hereby notified as required by sub-section (1)
of Section 134, for information of all persons likely to be affected thereby and notice is hereby
given that the said draft notification will be taken into consideration after the expiry of a period
of 45 days from the date on which the copies of the Official Gazette in which this notification is
published are made available to the public; Objections and suggestions, if any, may be
addressed to Shri Ravishankar Nirala, Under Secretary to the Government of India, Ministry of
Labour and Employment, Room No: 17, Shram Shakti Bhawan, Rafi Marg, New Delhi or by
email (ravis.nirala@nic.in and cmcdgms1@gmail.com). The objections and suggestions should
be sent in a proforma containing columns (i) specifying the name and address of the persons and
organizations and column (ii) specifying the rule or sub-rule which is proposed to be modified
and column (iii) specifying the revised rule or sub rule proposed to be submitted and the reasons
therefore; Objections and suggestions, which may be received from any person or organization
with respect to the said draft notification before expiry of a period of 45 days, specified above,
will be considered by the Central Government.
Draft Occupational Safety, Health and Working Conditions (Metalliferous Mines)
Regulations, 2026 prescribed under section 136 of the OSH&WC Code, 2020 for Mines
Workers.172 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER - I
PRELIMINARY
1. Short title, commencement, application and extent. – (1) These regulations may be called the
Occupational Safety, Health and Working Conditions (Metalliferous Mines) Regulations, 2026.
(2) They shall come into force on the date of their publication in the Official Gazette.
(3) They shall apply to every mine other than a coal or an oil mine.
(4) They extend to the whole of India.
2. Definitions. – (1) In these regulations, unless the context otherwise requires,-
(a) “abandoned working” means such working as have been abandoned with no intention of working
in future;
(b) “adit” means a horizontal or near-horizontal entrance to an underground mine for the purposes of
access and egress, mineral extraction, ventilation and drainage of water;
(c) “approved safety lamp” and “approved electric torch” mean respectively, a safety lamp or an
electric torch of such type as the Chief Inspector-cum-Facilitator may, from time to time, specify
by a general or special order;
(d) “assistant manager” means a person possessing a Manager’s Certificate appointed in writing by
the owner, agent or manager to assist the manager in the management, control, supervision and
direction of the mine or part thereof, and who holds the rank immediately below the manager and
superior to a mining supervisor and an assistant mining supervisor;
(e) “assistant mining supervisor” means a person possessing a Manager’s or Mining Supervisor’s or
Assistant Mining Supervisor’s Certificate, appointed by the manager in writing, under any
designation whatsoever, to perform the duties of assistant mining supervisor under these
regulations;
(f) “auxiliary fan” means a forcing fan or an exhausting fan used belowground wholly or mainly for
ventilating one or more faces forming part of a ventilating district;
(g) “average employment” of any mine, means the average number of persons employed per day in
the mine or part of the mine during the preceding calendar year, from first day of January to
thirty first day of December (obtained by dividing the number of man days worked by the number
of working days excluding the rest days and other non-working days);
(h) “average output” of any mine, means the average output per month during the preceding
calendar year of the total output from all workings within the specified mine boundaries;
(i) “bellman” means a person appointed to superintend the raising and lowering of persons, tools,
materials and to transmit signals at any inset, landing or shaft bottom;
(j) “blaster” means a person possessing a Manager’s, Mining Supervisor’s, Assistant Mining
Supervisor’s or Blaster’s Certificate and appointed by the manager in writing to perform the duties
of a blaster under these regulations;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 173
(k) “booster fan” means a mechanical ventilator used belowground for boosting the whole current of
air passing along the intake or return airway of a mine or ventilating district;
(l) “Box cut” means an initial or first rectangular open cut made to provide secure and safe entrance
as access to develop a mineral deposit;
(m) “calendar year” means a year from first day of January to the thirty first day of December;
(n) “Code” means the Occupational, Safety, Health and Working Conditions Code, 2020;
(o) “consultant” means a firm or a person or persons who provide(s) expert or strategic advice
services involving specific, intellectual and procedural processes using established technologies,
and methodologies and the outcomes are primarily of a non-physical nature.
(p) “decline” means a passage from surface to belowground or from one part of belowground working
to another part other than shaft generally used for person and/or machinery movement;
(q) “deep-hole drilling and blasting” means drill holes made more than three meters in depth and
used for blasting in an opencast mining operation;
(r) “designer” means an individual, association of individuals, company or institution who designs a
metalliferous mining system, method of metalliferous mining, machinery, plant, equipment,
appliance or substances for use in metalliferous mines;
(s) “development heading” in relation to an underground mine, means any box cut, drive, cross-cut,
tunnel, adit, incline, decline, drift, ramp, raise, winze, or shaft which is driven to provide access
and services to underground workings;
(t) “diesel particulate matter” means a component of diesel exhaust that includes tiny (soot) particles
with absorbed organic compound made up primarily of carbon, ash, metallic abrasion particles,
sulphates, nitrates and silicates;
(u) “discontinued working” means such working in a mine as have been discontinued for any reason
and are inaccessible or rendered inaccessible but are likely to be worked again;
(v) “disused working” means such working in a mine where work has been temporarily stopped, but
which are accessible and include unused working;
(w) “electrical supervisor” means a person possessing qualification and experience as defined in these
regulations, appointed by the manager in writing, under the designation whatsoever, to perform
the duties of supervision or control of erection, commissioning, repair, maintenance,
decommissioning and safe working of electrical installation placed under his or her charge, who
shall be subordinate to an engineer;
(x) “electrician” means a person duly licensed or permitted under regulation 31 of the Central
Electricity Authority (Measures relating to Safety and Electric Supply) Regulations, 2023, and
appointed and authorised in writing by the owner, agent or manager of a mine under regulation
117 thereof, to carry out electrical work in a mine under the supervision of an electrical supervisor
holding a valid Certificate of Competency;
(y) “explosive” shall have the same meaning as is assigned to it in the Indian Explosives Act, 1884 (4
of 1884);174 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(z) “Exposure Action Value (EAV)” means a level of quantum of daily exposure to vibration which when
crosses certain value, employers are required to take action to control the vibration level and is
expressed in meters per second squared (m/s2), on eight hourly average basis i.e. A (8).
Explanation: A (8) means average (A) exposure over an eight (8)-hour in a day.
(za) “Exposure Limit Value (ELV)” means the maximum quantum of vibrational exposure that a
workman is exposed to, in a day for eight hours, on an average and is expressed in meter per
square second, on eight hourly average basis i.e. A (8).
(zb) “face” means the moving front of any working place or the inbye end of any drive, level, crosscut,
raise or winze, etc.,;
(zc) “fire hydrant system” means a system of pipe network connected directly to the water supply
main to instantly provide water to deal with fire;
(zd) “flame proof enclosure” shall have the same meaning as defined under the Central Electricity
Authority (Measures relating to Safety and Electric Supply) Regulations, 2023;
(ze) “Form” means a form as may be specified by an order or instruction by the Chief Inspector-cum-
Facilitator under these regulations;
(zf) “gas” includes fume or vapour;
(zg) “general body of air” means the general atmosphere in the working belowground and includes the
atmosphere in the roof cavities, but does not include general atmosphere in the sealed off area or
in any borehole drilled in the ore or waste rock;
(zh) “haulage attendant” means a trained and authorized person employed in connection with haulage
operations in a mine, who assists in the safe movement of tubs, mine cars, or other conveyances,
and performs duties related to coupling, uncoupling, signaling, track switchover operation and
supervision of the haulage roadway, in accordance with the provisions of the Code, regulations
and orders made thereunder;
(zi) “haulage engine operator” means a competent and authorized person who is responsible for the safe
operation, control, and supervision of a haulage engine used for hauling tubs, wagons, mine cars,
or other loads in a mine, whether on the surface or underground, in accordance with the
provisions of the Code, regulations and orders made thereunder;
(zj) “haul road” means any passage or road, which is maintained and used in connection with the
working of opencast mines for plying of machinery within the precincts of a mine;
(zk) “Heavy Earth Moving Machinery (HEMM)” means machinery used in opencast mines for digging,
drilling (excluding hand held drills and drill machines capable of drilling hole of a diameter up to
fifty milli meters), compacting, dredging, cutting, hydraulicking, ripping, dozing, grading,
excavating, mobile water sprinkler, loading or transporting material;
(zl) “inset” means a landing or platform in a shaft, and includes an excavation therefrom between the
top and the bottom of the shaft;
(zm) “intrinsically safe” shall have the same meaning as defined under the Central Electricity Authority
(Measures relating to Safety and Electric Supply) Regulations, 2023 as amended from time to
time;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 175
(zn) “landing” means any floor or platform in a shaft, or winze, which is authorized by mines manager
as stopping place of the cage or other means of conveyance;
(zo) “locomotive” means a rail mounted self-propelled machinery used for hauling tub or train of tubs
for transportation of material in mine;
(zp) “locomotive operator” means a person who is authorized by the mine manager in accordance with
the provisions of this regulations, and is competent to drive and control a locomotive, including its
braking, signalling and safety systems, used in a mine;
(zq) “manager” means a manager appointed under Section 67 of the Occupational Safety, Health and
working Conditions Code, 2020;
(zr) “manufacturer” means an individual, association of individuals, company or institution who
manufactures machinery, plant, equipment, appliance or substances for use in metalliferous
mines;
(zs) “material” includes rock, debris, waste, stone, mineral or ore;
(zt) “mechanic” or “fitter” means a person duly appointed and authorized by the owner, agent or
manager of a mine to carry out the installation, fitting, adjustment, maintenance, repair or testing
of machinery, equipment or appliances in a mine, and who is trained and competent to perform
such work in a safe and proper manner in accordance with the provisions of the Code, these
regulations and the orders made thereunder;
(zu) “mechanical supervisor” means a person possessing qualification and experience as prescribed in
these regulations, appointed by the owner, agent or manager in writing, under the designation
whatsoever, to perform the duties of supervision or control of erection, commissioning, repair,
maintenance, decommissioning and safe working of machinery placed under his or her charge,
who shall be subordinate to engineer;
(zv) “mechanised opencast mine” means a mine, adopting opencast mining method, with or without
deep hole blasting technique, and using any or combination of Heavy Earth Moving Machinery,
crusher, screen, stacker, reclaimer, conveyor, slurry pipeline and other ancillary machinery.
(zw) “metalliferous mine” includes every mine other than a coal or an oil mine;
(zx) “mining supervisor” means a person possessing a Manager’s or Mining Supervisor’s Certificate,
appointed by the manager in writing, under the designation whatsoever, to perform the duties of
supervision or control in a mine or part thereof, and is as such superior to an assistant mining
supervisor;
(zy) “misfire” means the failure to explode of an entire charge of explosives in a shot-hole or blast
hole;
(zz) “month” means a calendar month;
(zza) “official” means a person appointed in writing by the owner, agent or manager to perform duties
of supervision in a mine or part thereof and includes an assistant manager, a ventilation officer, a
safety officer, an engineer, a mining supervisor, an assistant mining supervisor, blaster, a
mechanical supervisor, a surveyor, an electrical safety officer and electrical supervisor appointed
under the Central Electricity Authority (Measures relating to Safety and Electric Supply)
Regulations, 2023;176 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(zzb) “operator” means a competent person who is responsible for the safe operation of any specific
machinery, having completed specific vocational training and authorized or appointed in writing by
manager of the mine;
(zzc) “permitted explosive” means an explosive manufactured by such firm and of such types as the
Chief Inspector-cum-Facilitator may, from time to time, specify by a general or special order;
(zzd) “pipeline” means a pipeline laid or being used in a mine for the purpose of pumping or supply of
water, compressed air, sand stowing or filling of material other than sand stowing, nitrogen
flushing or for any other purpose;
(zze) “pit top attendant” means a person appointed to superintend the lowering and raising of persons,
tools and materials and to transmit signals at the top of a shaft, or winze;
(zzf) “principal official” means the senior-most mine official in mining discipline on duty in the mine;
(zzg) “public road” means a road maintained for public use and under the jurisdiction of any
government or local authority;
(zzh) “quarter” means a period of three months ending on the 31st March, 30th June, 30th September
and 31st December;
(zzi) “refuge chamber” means an emergency shelter inside an underground mine that provides a safe,
sealed environment where miners can take refuge if escape to the surface is not possible due to
an emergency such as fire, explosion, roof-fall, toxic gases, or inundation.;
(zzi) “Regional Inspector-cum-Facilitator” means an Inspector-cum-Facilitator of Mines having jurisdiction
over a geographical area in which the mine is situated and over which he or she exercises his or
her powers under the Code;
(zzj) “rescue cover” means the provision of a fully equipped fresh air base with standby team as
provided under rule 136 of the Occupational Safety Health and Working Conditions (Central)
Rules 2025;
(zzk) “risk” means the combination of likelihood of a specific unwanted event and its potential
consequences;
(zzl) “river” means any stream or current of water, whether seasonal or perennial, and includes its banks
extending up to the highest known flood level;
(zzm) “roadway” means any passage or drivage or part thereof belowground which is maintained in
connection with the working of a mine;
(zzn) “Schedule” means a Schedule appended to these regulations;
(zzo) “shaft” means a vertical or inclined way or opening leading from the surface to the workings
belowground or from one part of workings belowground to another and includes an incline;
(zzp) “shot-hole” means a hole drilled for the purpose of being fired after charging with explosive for
effecting breakage of ground in the mine;
(zzq) “signalman” means a person appointed to transmit signals;
(zzr) “socket” means a shot-hole or blast hole or part thereof remaining after being charged with
explosive and blasted, and which is not known to be a misfired hole;
(zzs) “Standard Operating Procedure (SOP)” means a documented way of working, aim to eliminate or
minimise the risk;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 177
(zzt) “supplier” means an individual, association of individuals, company or institution who supplies a
technology including technological consultancy, machinery, plant, equipment, appliance or
substance for use in metalliferous mines;
(zzu) “support” means any natural or artificial means provided in a mine to sustain or control the roof,
sides, floor, highwall, bench or slope, so as to prevent falls of ground and ensure the safety and
stability of workings, and includes props, chocks, roof bolts, shotcrete, reinforced concrete,
masonry, packwalls, liners or any other approved system of ground control;
(zzv) “tub” includes a wagon, car, truck or any other vehicle moving on rails for conveying materials, but
does not include a railway wagon;
(zzw) “underground mobile machinery” means self-propelled machinery used in belowground mine for
rock breaking, drilling, boring, explosive transporting and/or charging, scaling, bolting, shot-
creting, material handling, loading, grading, compacting, cutting, water sprinkling or
transporting men, materials, minerals, fuel or waste including mobile machinery or known
by any other name;
(zzx) “ventilation district” means such part of a mine belowground as has an independent intake airway
commencing from a main intake airway, and an independent return airway terminating at a
main return airway, and, in the case of a mine or part thereof which is ventilated by natural
means, the whole mine or part;
(zzy) “winding-engine operator” means a person who is the holder of a winding-engine operator’s
certificate of competency issued under this regulations for the purpose;
(zzz) “winze” or “raise” means a small shaft, either vertical or incline, in the working belowground;
(zzza) “working” means any excavation made or being made in a mine for search of or obtaining
minerals;
(zzzb) “working place” means any place in a mine to which any person has lawful access;
(2) Words and expressions used in these regulations and not defined herein but defined in the Code
shall have the meanings respectively assigned to them under the Code.
CHAPTER - II
EXAMINATION AND CERTIFICATES OF COMPETENCY AND OF FITNESS
3. Board of Mining Examination. - (1) For the purpose of these regulations, there shall be
constituted a Board of Mining Examination (hereinafter referred to as ‘the Board’ under these
regulations).
(2) The Board shall consist of:
(i) the Chief Inspector-cum-Facilitator, as Chairperson (ex-officio); and
(ii) five members possessing degree in mining engineering; with
(a) first class Manager’s Certificate of competency granted under regulation 4; or178 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) practical experience of not less than twenty years’ in management, control,
supervision and direction of a metalliferous mine; or
(c) at least five years’ service in an institution imparting education in mining engineering
at the degree or equivalent level; or
(d) at least five years’ engagement in mining research or planning:
Provided that the Board shall be so constituted that it shall include at least three members
possessing qualifications laid down in clauses (a) and (b) and at least one member possessing
qualifications laid down either in clause (c) or in clause (d); and
(iii) one member possessing degree in Electrical Engineering and having not less than twenty
years of experience in transmission, distribution and use of electricity in mines, as and
when required basis, in the matter of certificates to be granted to electrical supervisors in
respect of electrical installations in Metalliferous mines; and
(iv) Chief Electrical Inspector or any other Electrical Inspector, as defined under the Electricity
Act, 2003 appointed by the Central Government.
(3) Every member of the Board other than its Chairperson shall hold office for a period of three years
from the date of appointment, or until his successor is appointed, whichever is later:
Provided that, –
(i) a member may at any time resign his or her office by a notice in writing addressed to the
Chairperson;
(ii) a member appointed under sub-regulation (2) shall cease to hold office upon his or her
superannuation or ceasing to serve in any such institution or organization; and
(iii) a person appointed to fill a vacancy caused by reason of the death, resignation, or by
reason of superannuation or cessation of office under sub-clause (ii) or otherwise, shall hold
office for the remaining period.
(4) A person who holds, or who has held, office as member of the Board shall, subject to the other
provisions of this regulation, be eligible for re-appointment to that office.
(5) A member of the Board other than the Chairperson shall receive such remuneration as the Central
Government may fix.
(6) An Inspector-cum-Facilitator nominated in this behalf by the Chief Inspector-cum-Facilitator shall act
as the Secretary to the Board (hereinafter referred to in these regulations as the Secretary).
(7) Notwithstanding anything contained in this regulation, the Central Government may, if satisfied that
it is necessary to do so in the public interest, re-constitute the Board even though the term of office of
all or any of the members thereof has not come to an end.
(8) Meetings of the Board shall be held as and when the Chairperson considers them necessary, and
unless otherwise decided by the Chairperson, all meetings of the Board shall be held at such place with
the approval of the Chairperson.
(9) (a) For every meeting of the Board, not less than ten clear days prior notice intimating the time
and place of the proposed meeting and signed by the Chairperson or the Secretary shall be
given to each member.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 179
(b) Such notice shall be delivered at, or posted to the official address or usual place of
residence or email address of the member, and each such notice shall be accompanied by a
list of items of business to be disposed off at that meeting.
(c) Notwithstanding anything contained in clauses (a) and (b), in cases of urgency, an
emergent meeting may be called for by the Chairperson at any time by intimating the
members, only two days in advance, of the time and date of such meeting and the subject
matter for discussion at such meeting.
(10) (a) The Chairperson shall preside at every meeting of the Board.
(b) If the Chairperson is absent for any reason, members present shall elect one among them
to preside over the meeting; and the member so elected shall, for the purposes of that
meeting, have all powers of the Chairperson.
(11) No business shall be transacted at a meeting of the Board unless at least three members, including
the Chairperson, are present physically or through Video conferencing or both:
Provided that if at any meeting there is no quorum as aforesaid, the meeting shall automatically
stand adjourned to a date which is seven days later or if that day is a public holiday to the next working
day and the time, place and agenda for the adjourned meeting shall remain unchanged, and it shall
thereupon be lawful to dispose of the business at such meeting, irrespective of the number of members
attending.
(12) (a) All matters which the Board is required to consider shall be considered at its meeting, or if
the Chairperson so decides, by circulation of the papers, to every member who is not
absent from India.
(b) When any matter is referred to by circulation of paper under clause (a), any member may
request that it should be considered at a meeting of the Board, and the Chairperson may
direct that it shall be so considered but when two or more members so request, the
Chairperson shall direct that the matter shall be so considered at a meeting to be held.
(13) (a) The Secretary shall place before the Board a list of business to be transacted at the
meeting.
(b) No business which is not included in such list shall be considered unless the Chairperson
permits.
(14) (a) Every matter at a meeting shall be decided by the majority of votes of the members present
at such meeting.
(b) Every matter referred to the members by circulation under sub-regulation (12) shall be
decided by the majority opinion of the members to whom the papers were circulated,
unless the Chairperson reserves it for consideration at a regular meeting to be held later.
(c) In case of equal division of votes or opinions of the members, the Chairperson shall have a
casting vote or opinion.
(15) (a) The Secretary shall record the minutes of each meeting in a bound-paged book kept for the
purpose or in retrievable and non-editable electronic form and copies of such minutes of
meeting shall be circulated to all members present in India.180 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) The minutes so recorded shall be confirmed at the next meeting of the Board and signed by
the Chairperson in token thereof.
(16) (a) The Chairperson, in addition to any other power and duties conferred upon him or her
under these regulations, shall-
(i) present all important papers and matters to the Board as early as possible;
(ii) issue orders for carrying out the decisions of the Board;
(iii) have power to refer, in his or her discretion, any matter to the Central Government
for their orders; and
(iv) have powers generally to take such action or pass such orders necessary to
implement the decisions of the Board.
(b) The Chairperson may, during his or her temporary absence by reason of leave or otherwise,
authorise any member of the Board to perform all or any of duties of the Chairperson
during such absence.
(c) Unless the Chairperson otherwise directs, all proceedings of the Board shall be conducted
in-camera and be regarded as confidential.
4. Certificate granted by Board. - (1) The certificates specified in sub-regulation (2) shall be granted
by the Board.
(2) Certificate granted by the Board shall be valid throughout the territories to which these regulations
extend, and shall be of the following kinds, namely: –
(a) Manager’s first class certificate of competency to manage a metalliferous mine (hereinafter
referred to as a First Class Manager’s Certificate);
(b) Manager’s second class certificate of competency to manage a metalliferous mine
(hereinafter referred to as a Second Class Manager’s Certificate);
(c) Surveyor’s certificate of competency to survey the working of a metalliferous mine
(hereinafter referred to as a Surveyor’s Certificate);
(d) Mining supervisor’s certificate of competency to carry out inspections and duties as required
under these regulations (hereinafter referred to as a Mining Supervisor’s Certificate);
(e) Assistant mining supervisor’s Certificate of competency to carry out inspections and duties
as required under these regulations (hereinafter referred to as an Assistant Mining
Supervisor’s Certificate);
(f) Winding engine operator’s certificate (earlier granted as Engine Driver’s Certificate) to
operate a winding engine of a type or class as specified.
(g) Electrical supervisor’s certificate of competency (hereinafter referred to as Electrical
Supervisor’s Certificate covering mining installations) to carry out supervision, examination
and duties covering mining installations as required under the Central Electricity Authority
(Measures relating to Safety and Electric Supply) Regulations, 2023.
(h) Blaster’s certificate of competency to fire shots in a metalliferous mine (hereinafter referred
to as a Blaster’s Certificate):
Provided that, after coming into force of these regulations,-[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 181
(i) a First or Second Class Engine Driver’s Certificate granted under regulation 12 of the
Metalliferous Mines Regulations, 1961 shall be also deemed to have been granted as an
winding engine operator’s certificate under this regulation; and
(ii) a Mine Foreman’s certificate of competency and Mining Mate’s certificate of competency
granted under regulation 12 of the Metalliferous Mines Regulations, 1961 shall each be also
deemed to have been granted as a Mining Supervisor certificate of competency, and an
Assistant Mining Supervisor certificate of competency respectively under this regulation:
Provided that any of the certificates aforesaid, other than a Winding Engine Operator’s Certificate
and Electrical Supervisor Certificate covering mining installations, may be restricted to mines having
opencast working only, and this fact shall be endorsed on the certificate:
Provided further that a Mining Supervisor’s Certificate and an Assistant Mining Supervisor’s
Certificate may be restricted to mines having opencast working only without blasting, and this fact shall
be endorsed on the certificate.
5. Examinations and examiners. - (1) Certificate shall be granted to candidates after such
examinations and in such form as the Board may specify:
Provided that the Board may, subject to the conditions specified in the examination bye-laws,
exempt any person from appearing at the examination or part thereof for the grant of a certificate
referred to in regulation 4.
(2) The number of examinations shall be held at such intervals and at such centres as may be fixed by
the Board, and shall be conducted by examiners appointed by the Board.
(3) The examiners referred to in sub-regulation (2) shall be subject to the orders of the Board in respect
of all matters relating to the conduct of the examinations, and shall receive such remuneration as the
Board, with the sanction of the Central Government, may fix.
(4) The Board may formulate the examination bye-laws, as to the procedure for, and the conduct of the
examinations and as to the granting of certificate of competency and of fitness as required under these
regulations, and shall so far as may be practicable, provide that the standard of knowledge required for
the grant of certificates of any particular class and the standard of medical fitness shall be uniform
throughout the territories to which these regulations extend:
Provided that the Board may take decision on any matter, not specified under the examination
bye-laws, which may be brought to it for disposal.
6. Submission of application. - (1) Application for an examination conducted by the Board shall be
made to the Board not less than sixty days prior to the date fixed for the examination in a manner and
in a form specified for the purpose.
(2) Notice regarding the date and place of the examination for all the examinations shall be published
under the order of the Board by such means as the Board may direct, not less than ninety days prior to
the first date of examination:
Provided that under special circumstances, the Board may specify any other period of notice in
variance to the aforesaid period.182 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
7. Age limit and general qualifications of candidates. - (1) No person shall be admitted as a
candidate at any examination held by the Board, unless he or she is twenty years of age or has
exceeded 65 years of age.
(2) Every application for any examination as aforesaid shall be accompanied by, -
(i) copy of certificate of age issued by a municipal authority or office of registrar of Births and
Deaths or a medical board constituted by an appropriate Government for the purpose:
Provided that in the case of a person holding a matriculation or equivalent certificate, such
certificate shall be submitted as evidence of age;
(ii) a medical certificate obtained not more than one year prior to the date of his or her
application, from a qualified medical practitioner holding at least a degree in Bachelor of
Medicines and Bachelor of Surgery (M.B.B.S.) and registered with, National Medical
Commission (erstwhile Medical Council of India) certifying the candidate to be free from
deafness, defective vision including defective colour vision or any other infirmity, mental or
physical, likely to interfere with the efficiency of his or her work; and
(3) No person shall be admitted as a candidate to any examination for a Manager’s Certificate,
Surveyor’s Certificate, Mining Supervisor’s Certificate, Assistant Mining Supervisor’s Certificate, Winding
Engine Operator’s Certificate or Electrical Supervisor’s Certificate covering mining installations or
Blaster’s Certificate unless he or she has passed at least the senior secondary school examination or
intermediate examination or its equivalent from a recognized Board or University; and
(4) (a) No person shall be admitted as a candidate for First Class Manager’s Certificate, Second
Class Manager’s Certificate and Mining Supervisor’s Certificate examination, unless he or
she has obtained Second Class Manager’s Certificate, Mining Supervisor’s Certificate and
Assistant Mining Supervisor’s Certificate respectively.
(b) No person shall be admitted as a candidate for First Class Manager’s Certificate, Second
Class Manager’s Certificate and Mining Supervisor’s Certificate (all restricted to mines
having opencast working only) examination, unless he or she has obtained Second Class
Manager’s Certificate (including that restricted to mines having opencast working only),
Mining Supervisor’s Certificate (including that restricted to mines having opencast working
only) and Assistant Mining Supervisor’s Certificate (including that restricted to mines having
opencast working only) respectively.
Provided that the Board may, subject to the conditions specified in the examination bye-laws,
exempt any person from the stipulations of the above sub-regulation.
Provided further that nothing in this clause shall be deemed to debar a person not satisfying the
provisions thereof from being admitted at an examination for any Certificate for three years from the
date of coming in to force of these regulations, if he or she had been admitted earlier at an examination
for the said certificate.
8. Practical experience of candidates for Manager’s Certificate examination. - (1) No person
shall be admitted as a candidate at any examination for a First Class Manager’s Certificate other than an[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 183
exchange Certificate to which the provisions of regulation 14 apply, unless such conditions as specified
by the Board are full filled that he or she has had practical experience in metalliferous mine for a period
of one year after the effective date of his or her Second Class Manager’s certificate.
(2) No person shall be admitted as a candidate at any examination for a Second Class Manager’s
Certificate other than an exchange Certificate to which the provisions of regulation 14 apply, unless such
conditions as specified by the Board are full filled that he or she has had practical experience in
metalliferous mine for a period of one year after passing degree in Mining Engineering or other
equivalent qualification approved in that behalf by the Central Government or three years after the
effective date of his or her Mining Supervisor’s Certificate:
Provided that nothing in sub-regulation (1) and sub-regulation (2) shall be deemed to debar a
person not satisfying the provisions thereof from being admitted at an examination for a First or Second
Class Manager’s Certificate, as the case may be, for three years from the date of coming into force of
these regulations, if he or she had been admitted earlier at an examination for the said certificate.
(3) The Board may specify, subject to the conditions laid down in the examination bye-laws, the nature
and other details of the practical experience required for Manager’s Certificate.
9. Practical experience of candidates for Surveyor’s Certificate examination. - No person shall
be eligible to appear as a candidate at any examination for a Surveyor’s Certificate other than an
exchange Certificate to which the provisions of regulation 14 apply unless he or she possesses at least
two years’ practical experience of surveying of a type the Board may specify, subject to the conditions
laid down in the examination bye-laws:
Provided that such period shall be reduced to six months in the case of a candidate who has
attended classes in theoretical and practical surveying at an educational institution approved by the
Board subject to the conditions laid down in the examination bye-laws.
10. Practical experience of candidates for Mining Supervisor’s Certificate examinations. (1)
No person shall be eligible to appear as a candidate at any examination for Mining Supervisor’s
Certificate other than an exchange Certificate to which the provisions of regulation 14 apply, unless he
or she possess practical experience in metalliferous mine for a period of one year after passing diploma
in Mining or Mining Engineering or Mining and Mine Surveying or other equivalent qualification approved
in that behalf by the Central Government or one year after the effective date of his or her Assistant
Mining Supervisor’s Certificate.
Provided that nothing in this sub-regulation shall be deemed to debar a person not satisfying the
provisions thereof from being admitted at an examination for Mining Supervisor’s Certificate for three
years from the date of commencement of these regulations, if he or she had been admitted earlier at an
examination for the said certificate.
(2) The Board may specify, subject to the conditions laid down in the examination bye-laws, the nature
and other details of the practical experience required for Mining Supervisor’s Certificate.184 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
11. Practical experience of candidates for Assistant Mining Supervisor’s Certificate and
Blaster’s Certificate examinations. -
(1) No person shall be eligible to appear as a candidate at any examination for an Assistant Mining
Supervisor’s Certificate other than an exchange Certificate to which the provisions of regulation 14 apply,
unless such conditions as specified by the Board are fullfilled and has had practical experience and
training in a metalliferous mine for a period of not less than three years:
Provided that such period shall be reduced to a period of one year in the case of a candidate who
has received a diploma or certificate in scientific and mining training after a course of at least two years
at an educational institution, or who has taken a degree in scientific and mining subject at a university,
approved in that behalf by the Board subject to the conditions laid down in the examination bye-laws.
(2) No person shall be admitted as a candidate at any examination for a Blaster’s Certificate unless such
conditions as specified by the Board are full filled and has had practical experience and training in a
metalliferous mine for a period of not less than two years, of which not less than six months shall be
experience and training in connection with shot firing:
Provided that such period shall be reduced to period of one year (including not less than four
months in shot-firing) in the case of a candidate who has received a diploma or certificate in scientific
and mining training after a course of at least two years at an educational institution, or who has taken a
degree in scientific and mining subjects at an University, approved in that behalf by the Board subject to
the conditions laid down in the examination bye-laws.
(3) The Board may specify, subject to the conditions laid down in the examination bye-laws, the nature
and other details of the practical experience required for Assistant Mining Supervisor’s and Blaster’s
Certificate Examination.
12. Practical experience of candidate for Winding Engine Operator’s Certificate and
Electrical Supervisor’s Certificate covering mining installations: (1) No person shall be eligible
to appear as a candidate at any examination for a Winding Engine Operator’s Certificate of any type or
class other than an exchange Certificate to which the provisions of regulation 14 apply, unless he or she
has had practical experience as an assistant to a winding engine operator of same type or class for a
period of at least two years:
Provided that a candidate-
(a) who has received National Trade Certificate (NTC) from National Council for Vocational
Training (NCVT) or a State Trade Certificate (STC) from State Council for Vocational
Training (SCVT) after undergoing a training for a duration of two years in Fitter or Mechanic
Trades or any other equivalent qualification, as recognized by the Board, such period of
experience shall be reduced to one and half years.
(b) who has received a diploma in Mechanical Engineering or Electrical Engineering or Electrical
& Electronics Engineering from a recognised Board or University, such period of experience
shall be reduced to one year.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 185
(c) who has received a degree in Mechanical Engineering or Electrical Engineering or Electrical
& Electronics Engineering from a recognised Board or University, such period of experience
shall be reduced to six months.
Provided further that the experience referred to in this sub-regulation shall be the experience
obtained after acquiring the relevant academic qualification.
(2) No person shall be admitted as a candidate at any examination for an Electrical Supervisor’s
Certificate covering mining installations, unless such conditions as specified by the Board are fulfilled and
has had practical experience in transmission and distribution of electricity in mining installation as
prescribed under sub-regulation (3) for a period of not less than three years:
Provided that a candidate-
(a) who has received National Trade Certificate (NTC) from National Council for Vocational
Training (NCVT) or a State Trade Certificate (STC) from State Council for Vocational
Training (SCVT) after undergoing a training for a duration of two years in Electrical Trades
or any other equivalent qualification, as recognized by the Board, such period of experience
shall be reduced to two years.
(b) who has received a diploma in Electrical or Electrical & Electronics or Electrical &
Instrumentation or other equivalent qualification approved in that behalf by the Central
Government, such period of experience shall be reduced to one year;
(c) who has received a degree in Electrical or Electrical & Electronics or Electrical &
Instrumentation or other equivalent qualification approved in that behalf by the Central
Government, such period of experience shall be reduced to six months.
Provided further that the experience referred to in this sub-regulation shall be the experience
obtained after acquiring the relevant academic qualification.
(3) The Board may specify, subject to the conditions laid down in the examination bye-laws, the nature
and other details of the practical experience required for Winding Engine Operator’s Certificate and
Electrical Supervisor’s Certificate.
13. Fees for grant of Certificates. - Fees paid in respect of every application for the grant of a
certificate shall be prescribed by the Board.
14. Exchange Certificate. – (1) The Board may grant to any person, holding a Manager’s Certificate,
Surveyor’s Certificate, Winding Engine Operator’s Certificate, Mining Supervisor’s Certificate or Assistant
Mining Supervisor’s Certificate granted under any law for the regulation of mines in force in any other
country or under the Occupational Safety, Health & Working Conditions (Coal Mines) Regulations 2026,
a corresponding certificate of a similar class under the Occupational Safety, Health & Working Conditions
(Metalliferous Mines) Regulations, 2026, if he or she possesses such qualification and experience and
passes such examination as the Board may stipulate, subject to the conditions specified in the
examination bye-laws.186 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Provided that the Board may, subject to the conditions laid down in the examination bye-laws,
exempt any person from appearing at the examination or part thereof for the grant of an Exchange
Certificate.
(2) Every application for the grant of an Exchange Certificate under sub-regulation (1) shall be
accompanied by a medical certificate obtained not more than one year prior to the date of his or her
application, from a qualified medical practitioner holding at least a degree in Bachelor of Medicines and
Bachelor of Surgery (M.B.B.S.) and registered with National Medical Commission, certifying the
candidate to be free from deafness, defective vision including defective colour vision or any other
infirmity, mental or physical, likely to interfere with the efficiency of his or her work; and
Provided that in the case of a Manager’s Certificate, the candidate shall possess practical training
in India in the mines, for a period of not less than six months in such manner as may be specified by the
Board subject to the conditions laid down in the examination bye-laws.
(3) Fees on the scale laid down in regulation 13 shall be paid in respect of every examination under this
regulation.
15. Duplicate Certificate. - If any person proves to the conditions as specified by the Board that he or
she has, without any fault on his or her part, lost or been deprived of a certificate granted to him or her
under these regulations, the Board may upon realisation of the fee prescribed under regulation 13 and
subject to the conditions laid down in the examination bye-laws, cause a copy of the certificate to be
delivered to him or her and the word “DUPLICATE” shall be mentioned on every such copy.
16. Suspension or cancellation of Manager’s Certificate, Surveyor’s Certificate, Mining
Supervisor’s Certificate, Assistant Mining Supervisor’s Certificate, Electrical Supervisor’s
Certificate, Blaster’s Certificate, Winding Engine Operator’s Certificate or Gas Testing
certificate. - (1) If on the basis of a report of the Inspector-cum-Facilitator, the Regional Inspector-
cum-Facilitator is of the opinion that the holder of a Manager’s Certificate, Surveyor’s Certificate, Mining
Supervisor’s Certificate, Assistant Mining Supervisor’s Certificate, Electrical Supervisor’s Certificate,
Blaster’s Certificate, Winding Engine Operator’s Certificate or Gas Testing certificate, is guilty of
negligence or misconduct in the performance of duties under the Code or under these regulations, he or
she shall bring the matter to the notice of the Board.
(2) The Board shall, on the report of the Regional Inspector under sub-regulation (1), to hold an enquiry
in accordance with the procedure laid down by the Board for the purpose of this regulation, to determine
whether or not such a person (hereinafter referred to as the delinquent) is fit to continue to hold such
certificate.
Provided that the Board shall, before the enquiry, furnish to the delinquent a statement of the
case on which the enquiry is instituted.
(3) The Inspector-cum-Facilitator who conducted the enquiry shall, within seven days from the date of
conclusion of his or her enquiry, send a report to the Board electronically together with his or her
findings, the notes of evidence recorded during the enquiry and other relevant records.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 187
(4) Copies of the notes of evidence and the findings of the Inspector-cum-Facilitator who conducted the
enquiry shall also be sent to the delinquent by electronically or registered post who may submit his or
her written representation electronically or registered post to the Board within fifteen days from the date
of receipt of the report.
(5) The Board may, after considering the evidence and other records and the written representation, if
any, submitted by the delinquent, either cause further enquiry to be made in the case and thereupon or
otherwise, either exonerate the delinquent of the charges against him or her or suspend or cancel the
certificate, subject to the guideline issued by the Board.
(6) An appeal shall lie against any order of the Board under this regulation before the Central
Government within thirty days of such order.
(7) Where a certificate is suspended or cancelled under this regulation shall be entered in the relevant
record.
17. Validity of certificate for managers, and officials etc.- (1) No person shall act as a manager
or an official or a winding engine operator in a mine after attaining the age of sixty years unless he or
she has obtained, within the preceding one year, a medical certificate issued by Qualified Medical
practitioner as specified in clause (ii) of the sub-regulation 2 of regulation 7, of fitness certifying him or
her fit to carry out the duties prescribed for him or her in the Code and in the Rules, Regulations and
orders made thereunder:
Provided that if the Chief Inspector-cum-Facilitator or the Regional Inspector-cum-Facilitator is of
the opinion that a person as aforesaid, though less than sixty years of age, is medically unfit to carry on
the duties assigned to him or her in the Code and in the Rules, Regulations and orders made
thereunder, the Chief Inspector-cum-Facilitator or the Regional Inspector-cum-Facilitator may, by an
order in writing, require such person to obtain a medical certificate of fitness within such period, not
exceeding three months, as may be specified therein; and no such person shall continue to act in any
capacity as aforesaid after the period so specified unless he or she has obtained a medical certificate of
fitness.
(2) The medical certificate of fitness as aforesaid shall be obtained from such authority and in such form
and manner as the Board may specify subject to the conditions laid down in examination bye-laws.
(3) Notwithstanding anything contained in sub-regulation (1), no person shall act as manager or an
official in a mine after attaining the age of seventy years; in case of winding engine operator in a mine,
the maximum age limit shall be restricted to 65 years.
CHAPTER – III
INSPECTOR-CUM-FACILITATORS AND MINE OFFICIALS
18. Qualifications of Chief Inspector-cum- Facilitator or Inspectors-cum-Facilitators. - (1)
No person shall be appointed as Chief Inspector-cum-facilitator unless person holds a degree in mining188 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
engineering of an educational institution approved by the Central Government and also a First Class
Manager’s Certificate granted under regulation 4.
(2) No person shall be appointed as an Inspector-cum-Facilitator unless person holds a degree in mining
engineering of an educational institution approved by the Central Government and also a First Class
Manager’s Certificate granted under regulation 4:
Provided that –
(i) in relation to electrical machinery installed in mines, a person holding a degree in electrical
engineering of an educational institution approved by the Central Government may be so
appointed;
(ii) in relation to other machinery or mechanical appliances installed in mines, a person holding
a degree in mechanical engineering or Mining machinery of an educational institution
approved by the Central Government may be so appointed, and
(iii) in relation to the provisions of the Code and of the rules and regulations which relate to
matters concerning the health and welfare of persons, a person holding a degree in
Bachelor of Medicines and Bachelor of Surgery (M.B.B.S.) and registered with National
Medical Commission or such other qualification as may be prescribed, of an educational
institution approved by the Central Government or a person holding such other
qualifications as the Central Government may approve in this behalf, may be so appointed.
19. Appointment of agent. - (1) The owner of a mine shall submit in writing to the Chief Inspector-
cum-Facilitator and the Regional Inspector-cum-Facilitator, a statement showing names and designation
of every person authorised to act on behalf of the owner in respect of management, control, supervision
and direction of the mine.
(2) The statement referred to sub-regulation (1) shall state the responsibilities of every person in respect
of matters for which he or she is authorised to act on behalf of the owner.
(3) Every such person referred to in sub- regulation (1) shall be an agent for the mine or group of
mines, as the case may be, in respect of the responsibilities as specified in the statement referred
therein.
(4) The statement specified under sub-regulation (1) shall be submitted within seven days from the date
of opening or reopening of a mine or a group of mines, as the case may be:
Provided that in case of a mine or group of mines, as the case may be, which has already been
opened, such statement shall be submitted within a month of coming into force of these regulations.
(5) Any change, addition or alteration in the names or other particulars of the statement referred to in
sub-regulation (1), shall be reported in writing to the Chief Inspector-cum-Facilitator and the Regional
Inspector-cum-Facilitator within seven days from the date of such change, addition or alteration.
(6) No person shall be appointed as agent of the mine under this regulation unless the person is a
citizen of India and resides in India for a period of not less than 240 days in a calendar year.
20. Qualification of agent. - (1) After coming into force of these regulations and subject to the
provisions contained in Regulation 19 with regard to appointment of Agent, no person less than 25 years[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 189
of age or more than 70 years of age shall act or continue to act on behalf of owner or be appointed as
agent of a mine unless person holds a bachelor degree of an educational institution approved by the
Government, and having experience of not less than 10 years in operations or activities connected with
the mines.
(2) It shall not be a defence in any proceedings brought against an agent, whether appointed as such
or not under the Code that person does not possess qualification and experience prescribed under Sub-
regulation (1) to carry out the responsibilities in accordance with the provisions of the Code and of the
rules, regulations and orders made thereunder.
(3) If any question arise as to whether the agent appointed at a mine holds qualifications and
experience as required under Sub-regulation (1) or not, the decision of Chief Inspector-cum-Facilitator
shall be final.
21. Charge report of manager. - When there is a change of manager of any mine, the outgoing
manager shall hand over to the incoming manager, a charge report in a format as may be specified by
the Chief Inspector-cum-Facilitator, by a general or special order and the charge report shall be signed
by both the outgoing and incoming managers and a copy of the charge report shall be sent to the
Regional Inspector-cum-Facilitator.
22. Appointment of assistant manager. - In every mine, the manager shall be assisted by assistant
managers on the scale as may be specified by the Chief Inspector-cum-Facilitator.
Provided that where special conditions exists, the Chief Inspector-cum-Facilitator may relax or
require the appointment of assistant managers in variance of the scale specified.
23. Qualifications and appointment of ventilation officer. - In every belowground mine , where
the average output exceeds 2,500 tonnes per month, the manager shall be assisted in the work of
supervising the maintenance of ventilation system of the mine in accordance with the provisions of these
regulations by a ventilation officer who shall be a person holding the following qualifications, namely: -
(a) in the case of a mine having an average output in excess of 10,000 tonnes per month, a
Manager’s Certificate; and
(b) in every other case, a Manager’s Certificate or a Degree or Diploma in Mining or Mining
Engineering recognised by the Central Government:
Provided that where special conditions exist, the Chief Inspector-cum-Facilitator may, by an order
in writing and subject to such conditions as may be specified therein, permit or require the appointment
of a ventilation officer in variance of these provisions or require the appointment of such number of
persons to assist the ventilation officer, as may be specified in the order.
24. Appointment of engineers. - (1) At every mine where machinery is used, an engineer holding a
degree or diploma in mechanical engineering or electrical engineering or mining machinery or equivalent
qualification as may be recognised by the Central Government, shall be appointed to hold general charge
of such machinery, and to be responsible for its installation, maintenance and safe working, who shall be
subordinate to manager:190 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Provided that where electrical energy exceeding 440 volts is used and the installed capacity of
all electrical equipment is 1.0 MVA and above, one or more engineers holding a degree or diploma in
electrical engineering or equivalent qualification as may be recognised by the Central Government, shall
be appointed to hold charge of all the electrical equipment installed at the mine in addition to that
specified above:
Provided further that in case of mechanised opencast mines or in any belowground mine having
mechanised operations, one or more persons holding a degree or diploma in mechanical engineering,
mining machinery or equivalent qualification as may be recognised by the Central Government, shall also
be appointed to hold charge of all the mechanical equipment installed at the mine in addition to that
specified above:
Provided also that nothing in this sub-regulation shall be deemed to prohibit the employment of
two or more engineers at one mine so long as the jurisdiction and sphere of responsibility of every such
engineer is defined by the manager in writing.
(2) Notwithstanding anything contained in sub-regulation (1), the Chief Inspector-cum-Facilitator may,
by an order in writing, specify any qualification in addition to those referred to in that sub-regulation in
respect of a mine or class of mines, if having regard to the conditions existing in such mine or class of
mines, he is satisfied that it is necessary to do so in the interests of safety.
(3) No person shall act, or be appointed, as engineer of more than one mine except with the prior
permission in writing of the Chief Inspector-cum-Facilitator and subject to such conditions as may be
specified therein:
Provided that no such permission shall have effect for a period exceeding twelve months, unless
renewed:
Provided further that the Chief Inspector-cum-Facilitator may at any time, by an order in writing,
vary or revoke any such permission, if the circumstances under which the permission was granted, have
altered or the Chief Inspector-cum-Facilitator finds that the engineer has not been able to exercise
effective supervision in the mines under his or her charge.
(4) Where by reason of temporary absence by any cause, the engineer, appointed under sub-regulation
(1) is unable to perform his or her duties, the manager shall authorise a person whom he or she
considers competent to act in his or her place:
Provided that –
(a) notice of every such authorisation shall be sent to the Regional Inspector-cum-Facilitator
forthwith;
(b) no such authorisation shall have effect for a period in excess of thirty days except with the
previous written consent of the Regional Inspector-cum-Facilitator and subject to such
conditions as may be specified therein; and
(c) the Regional Inspector-cum-Facilitator may by an order in writing, revoke any authority so
granted.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 191
25. Appointment and qualifications of mining supervisor. - (1) At every mine, one or more
mining supervisor shall be appointed to hold charge of the different districts of the mine on each
working shift unless otherwise specified by the Regional Inspector-cum-Facilitator.
(2) The mine or district assigned to a mining supervisor sub-regulation (1) shall not be of such a size,
nor shall any additional duties other than his or her duties under these regulations be such, as are likely
to prevent him or her from carrying out in a thorough manner, the duties assigned to him or her under
these regulations.
(3) For the purposes of this regulation, every person employed as a mining supervisor shall subordinate
to the manager and superior to the assistant mining supervisor, shall hold either a Manager’s Certificate
or a Mining Supervisor’s Certificate.
26. Appointment and of Mechanical Supervisor. – (1) At every mine where machinery is used, one
or more mechanical supervisor, shall be appointed for supervision of erection, commissioning, repair,
maintenance and decommissioning of machinery placed under his or her charge on each working shift
unless otherwise specified by the Regional Inspector-cum-Facilitator.
(2) The machineries assigned to a mechanical supervisor under sub-regulation (1) shall not be of such a
quantity, nor shall any additional duties other than his or her duties under these regulations be such, as
are likely to prevent him or her from carrying out in a thorough manner, the duties assigned to him or
her under these regulations:
(3) For the purposes of this regulation, every person employed under sub-regulation (1) as a Mechanical
Supervisor subordinate to the Engineer, shall hold diploma or degree in mechanical engineering or
mining machinery or Automobile Engineering or equivalent qualification approved for the purpose by the
Central Government.
Provided that the person appointed as mechanical supervisor without possessing the
qualification as stated in sub-regulation (3) before coming into force of these regulations, shall continue
to be treated as mechanical supervisor under these regulations.
27. Appointment of surveyors. - (1) At every mine having workings belowground and at such other
mines or classes of mines as may be specified by the Chief Inspector-cum-Facilitator, from time to time
by a general order, one or more persons holding a Surveyor’s Certificate shall be appointed to be the
surveyor for carrying out the surveys and levellings and for preparing the plans and sections required
under the Code or the regulations, or orders made thereunder.
Provided that in case of mines having opencast workings only, nothing in this sub-regulation
shall prohibit the appointment of one or more persons holding a Surveyor’s Certificate restricted to
opencast mines only for carrying out the surveys and levellings and for preparing the plans and sections
required under the Code or the regulations, or orders made thereunder.
(2) No person shall be appointed as a surveyor of more than one mine or in any other capacity in the
same mine, without the previous permission in writing of the Chief Inspector-cum-Facilitator and subject
to such conditions as may be specified therein.192 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) The number of surveyors required to be appointed shall be on the scale, as may be specified by the
Chief Inspector-cum-Facilitator, from time to time, by a general order:
Provided that in specific cases, the Chief Inspector-cum-Facilitator may relax or require the
appointment of surveyors in variance of the scale specified.
(4) If a mine has more than one surveyor, each shall carry the duties and the responsibilities of the
surveyor for the part or section of the mine to be assigned in writing by the owner, agent or manager:
Provided that the owner, agent or manager shall appoint one of the surveyors to be responsible
for the preparation and maintenance of the plans required to be prepared and maintained under these
regulations who shall also be responsible for co-ordination and overall supervision of survey work in the
mine.
28. Appointment of officials and competent persons. - (1) The owner, agent or manager shall
appoint such number of competent persons, including officials as is sufficient to secure, during
each of the working shifts –
(i) adequate inspection of the mine and equipment thereof;
(ii) a thorough supervision of all operations in the mine;
(iii) the installation, running and maintenance, in safe working order, of all machinery in the
mine; and
(iv) the enforcement of the requirements of the Code and rules and regulations framed
thereunder.
(2) Without prejudice to the requirement of sub-regulation (1), where the mine is worked on more than
one shift, the owner, agent or the manager shall arrange that during the afternoon shift and the night
shift, the mine is under the general supervision of at least an assistant manager, and of an experienced
mining supervisor in other cases.
(3) It shall be the responsibility of the manager to see that the persons so appointed are competent to
perform the duties assigned to them:
Provided that no person shall be so appointed as official unless person is paid by the owner and
is answerable to the manager.
(4) Copies of all appointments made under sub-regulation (1) shall be entered in a bound-paged book
kept for the purpose or in retrievable and non-editable electronic form, where a list of all such
competent persons shall be maintained.
(5) Without prejudice to the requirements of sub-regulation (3), every manager on taking over charge
of a mine, shall satisfy himself or herself that all persons already appointed under sub-regulation (1) are
competent to perform the duties assigned to them; and if he or she finds them competent, he or she
shall either countersign their authorisations or issue fresh ones.
29. General Management. - (1) The notice of opening of a mine or commencement of any mining
operation under section 5 of the Code shall be submitted, thirty days prior to such intention, in the Form
and manner as may be specified by the Chief Inspector-cum-Facilitator for the purpose, accompanied by[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 193
a plan showing the boundaries of the mine and the shafts or openings of the mine, tri-junction or
revenue pillars and other prominent and permanent surface features to the Chief Inspector-cum-
Facilitator and a copy thereof to the Regional Inspector-cum- Facilitator
Provided that in case of change in the boundary of a mine under regulation 116, a plan showing
the new boundary shall be submitted within seven days of the said change.
Provided further that such notice of commencement shall also be given where it is intended to
open a belowground mine in an opencast workings or vice versa.
(2) The notice referred to in sub-regulation (1) shall be accompanied by,-
(a) a copy of the surface plan prepared under clause (a) of sub-regulation (1) of regulation 57;
(b) a copy of Safety Management Plan prepared under regulation 102:
(3) When a mine has been opened, the owner, agent or manager shall forthwith communicate the actual
date of opening to the Chief Inspector-cum-Facilitator, the Regional Inspector-cum-Facilitator and to the
District Magistrate.
(4) When it is intended to abandon or close a mine or to discontinue workings thereof for a period
exceeding sixty days, the owner, agent or manager shall submit the details in the Form and manner as
specified from time to time by general or special order by the Chief Inspector-cum-Facilitator for the
purpose, to the Chief Inspector-cum-Facilitator, the Regional Inspector-cum-Facilitator and to the District
Magistrate, stating the reasons for such abandonment, closure or discontinuance and the number of
persons likely to be affected thereby, not less than thirty days before such abandonment or
discontinuance:
Provided that when on account of unforeseen circumstances, a mine is abandoned, closed or
discontinued before the said notice has been given or without previous intention the discontinuance
extends beyond a period of sixty days, the notice shall be given forthwith.
(5) When a mine has been abandoned, closed or the workings thereof has been discontinued over a
period exceeding sixty days, the owner, agent or manager shall, within seven days of the abandonment,
closure or expiry of the said period of discontinuance, give to the Chief Inspector-cum-Facilitator, the
Regional Inspector-cum-Facilitator and to the District Magistrate, notice in the Form and manner as may
be specified by the Chief Inspector-cum-Facilitator, for the purpose.
(6 If a mine is abandoned or closed or workings thereof is discontinued over a period exceeding sixty
days or if a change occurs in the ownership of a mine, the returns required under Rule 66 of the
Occupational Safety, Health and Working Conditions (Central) Rules, 2025 shall be submitted within
thirty days of such abandonment or closure or change of ownership or within ninety days of
discontinuance, as the case may be.
(7) (a) When it is intended to reopen a mine after abandonment, closure or discontinuance for a period
exceeding sixty days, the owner, agent or manager shall, not less than thirty days before
resumption of mining operations, give to the Chief Inspector-cum-Facilitator, the Regional
Inspector-cum-Facilitator and to the District Magistrate notice in the Form and manner as
may be specified by the Chief Inspector for the purpose.194 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) When a mine has been reopened, the owner, agent or manager of the mine shall forthwith
communicate the actual date of the reopening to the Chief Inspector-cum-Facilitator, the
Regional Inspector-cum-Facilitator and to the District Magistrate.
(8) When any appointment is made of an agent, manager, engineer, surveyor, ventilation officer, safety
officer, or assistant manager or when the employment of any such person is terminated or any such
person leaves the said employment, or when any change occurs in the address of any agent or
manager, the owner, agent or manager shall, within seven days from the date of such appointment,
termination or change, give to the Chief Inspector-cum-Facilitator, the Regional Inspector-cum-
Facilitator a notice in the Form and manner as may be specified by the Chief Inspector for the purpose.
(9) When a change occurs in the name or ownership of a mine or in the address of the owner, the
owner, agent or manager shall, within seven days from the date of the change, give to the Chief
Inspector-cum-Facilitator, the Regional Inspector-cum-Facilitator a notice in the Form and manner as
may be specified by the Chief Inspector-cum-Facilitator for the purpose:
Provided that where the owner of a mine is a firm or other association of individuals, a change-
(i) of any partner in the case of a firm;
(ii) of any member in the case of an association;
(iii) of any director in the case of a public company; or
(iv) of any shareholder in the case of a private company,
shall also be intimated to the Chief Inspector-cum-Facilitator, the Regional Inspector-cum- Facilitator,
within seven days from the date of the change.
(10) When the ownership of a mine is transferred, the previous owner or his or her agent shall make
over to the new owner or his or her agent, within a period of seven days of the transfer of ownership, all
plans, sections, reports, registers and other records maintained in pursuance of the Code and of the
regulations, or orders made there under, and all correspondence relating to the working of the mine
relevant thereto; and when the requirements of this clause have been duly complied with, both the
previous and the new owners or their respective agents shall forthwith inform the Chief Inspector-cum-
Facilitator, the Regional Inspector-cum-Facilitator in writing.
(11) No person shall act or be employed as a manager under section 67 of the Code unless he has
attained 23 years of age and is paid by, and is directly answerable to the owner or agent of the mine.
(12) No person shall act, or be appointed, as manager of more than one mine except with the prior
permission in writing of the Chief Inspector-cum-Facilitator and subject to such conditions as may be
specified therein:
Provided that no such permission shall have effect for a period exceeding two years, unless
renewed:
Provided further that the Chief Inspector-cum-Facilitator may at any time, by an order in writing,
vary or revoke any such permission if the circumstances under which the permission was granted, have
altered or the Chief Inspector-cum-Facilitator finds that the manager has not been able to exercise
effective supervision in the mines under his or her charge.
(13) The Chief Inspector-cum-Facilitator may, by an order in writing, and subject to such conditions as
may be specified therein, authorise any person possessing not less than Mining Supervisor’s Certificate[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 195
of Competency to act as manager of any mine or mines for a specified period, notwithstanding that such
person does not possess the qualifications prescribed in that behalf by the Rule 96 of the Occupational
Safety, Health and Working Conditions (Central) Rules, 2025; and may by a like order revoke any such
authority at any time.
(14) Where under the provisions of Rule 96 of the Occupational Safety, Health and Working Conditions
(Central) Rules, 2025 a person holding a First Class Manager’s Certificate or Second Class Manager’s
Certificate has been appointed as manager, a person holding lower qualifications shall not, except with
the previous permission in writing of the Chief Inspector-cum-Facilitator and subject to such conditions
as may be specified therein, be so appointed during the succeeding twelve months, notwithstanding any
reduction in the average output of the mine.
(15) Where by reason of absence or for any other reason, the manager is unable to exercise daily
personal supervision or is unable to perform his or her duties under the Code or these regulations, or
orders made thereunder, the owner, agent or manager shall authorise in writing a person whom he or
she considers competent to act as manager of the mine:
Provided that –
(i) such person holds a Manager’s or Mining Supervisor’s Certificate;
(ii) no such authorisation shall have effect for a period in excess of sixty days; and
(iii) the owner, agent or manager, as the case may be, shall forthwith send by registered post,
speed post, or e-mail to the Regional Inspector-cum-Facilitator a written notice intimating
that such an authorisation has been made, and stating the reason for the authorisation, the
qualifications and experience of the person authorised, and the date of the commencement
and ending of the authorisation; and
(iv) the Chief Inspector-cum-Facilitator or the Regional Inspector-cum-Facilitator may,
except in the case of a person possessing the qualifications specified in the Rule 96 of the
Occupational Safety, Health and Working Conditions (Central) Rules, 2025, by an order in writing,
revoke any authority so granted.
(16) The persons so authorised to act as manager under sub-regulation (15) shall, during the period of
such authorisation, have the same responsibilities, discharge the same duties, and be subject to the
same liabilities as the manager.
(17) No manager shall vacate his or her office without giving due notice in writing to the owner or agent
at least thirty days before the day on which he or she wishes to vacate his or her office:
Provided that the owner or agent may permit the manager to vacate his or her office after
giving a shorter notice.
(18) No manager shall be entrusted by the owner or agent with any work, nor shall he or she himself or
herself perform any work, which may necessitate his or her frequent or prolonged absence from the
mine.
(19) The owner, agent and manager shall ensure the safety and proper discipline of persons employed
in the mine.196 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(20) The owner or agent shall provide suitable residential accommodation for the manager and the
assistant manager within a distance of twenty five kilometers from all mine openings, and every
manager, and assistant manager shall reside in the accommodation so provided:
Provided that where special difficulties exist which render compliance with these provisions not
reasonably practicable, the Chief Inspector-cum-Facilitator may, by an order in writing and subject to
such conditions as may be specified therein, grant exemption from the same.
(21) Except as hereinafter provided in sub-regulation (12), no manager shall act as manager or in any
other capacity in another mine.
(22) Every official or competent person shall, in case of sickness or of lawful absence, give early and
sufficient notice thereof to his or her superior official or the manager, as the case may be, so that a
substitute may be arranged.
(23) If any doubt arises as to any matter under this regulation, it shall be referred to the Chief
Inspector-cum-Facilitator for decision.
(24) Except in a case of emergency, no person who is not an official or competent person shall give,
otherwise than through the manager, instructions to a person employed in a mine, who is responsible to
the manager.
CHAPTER – IV
DUTIES AND RESPONSIBILITIES OF MINE MANAGEMENT, CONTRACTORS,
MANUFACTURERS, OFFICIALS, COMPETENT PERSONS AND WORKMEN
30. Duties and responsibilities of owner. - (1) The owner of every mine shall ensure that an
adequate and effective Safety Management Plan (SMP) is framed and implemented in the mine to
eliminate or minimise the risks to safety and health of persons employed in the mine.
(2) The owner shall take all necessary measures to eliminate or minimise the risks to safety and health
of persons employed in mines under their control and shall-
(a) ensure that the mine is designed, constructed, maintained and provided with fit-for-purpose
electrical, mechanical and other equipment, including a communication system, to provide
conditions for safe operation and a healthy working environment;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 197
(b) ensure that the machine or plant is commissioned, operated, maintained and de-
commissioned in such a way that workers can perform the work assigned to them without
endangering their safety and health or that of other persons;
(c) take steps to maintain the stability of the ground in which persons have access in the
context of their work;
(d) where practicable, provide from every underground workplace, two exits each of which is
connected to separate means of egress to the surface;
(e) ensure the monitoring, assessment and regular inspection of the working environment to
identify the various hazards to which the workers may be exposed and to assess their level
of exposure;
(f) ensure adequate ventilation for all underground working to which access is permitted;
(g) in respect of zones susceptible to particular hazards, draw up and implement an operating
plan and procedures to ensure a safe system of work and the protection of workers;
(h) take measures and precautions appropriate to the nature of a mine operation to prevent,
detect and combat the start and spread of fires, explosions and inundations;
(i) ensure that, when there is serious danger to the safety and health of workers, operations
are stopped and workers are evacuated to a safe location;
(j) ensure that corrective actions are taken immediately, when manager or other officials
report non-compliance with the provisions of these regulations or code of practices, by
any person; and
(k) ensure that the Safety Management Plan of the mine include but not limited to the
provisions contained in clause (a) to (j).
(3) (a) The owner of every mine shall provide and maintain a documented management structure
to ensure effective implementation of safety management plan in the mine; and
(b) The above document shall state the responsibilities of every person holding position in the
management structure.
(4) The owner of every mine shall provide adequate resources to ensure effective implementation of the
safety management plan.
(5) The owner of every mine shall ensure audit of the safety management plan and review the
effectiveness and implementation of the same.
(6) The owner shall ensure preparation of an emergency response plan specific to each mine for
reasonably foreseeable industrial and natural disasters.
(7) Where workers are exposed to physical, chemical or biological hazards, the owner shall-
(a) inform the workers, in a comprehensible manner, of the hazards associated with their work,
the health risks involved and relevant preventive and protective measures;
(b) take appropriate measures to eliminate or minimize the risks resulting from exposure to
those hazards;198 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(c) where adequate protection against risks of accident or injury to health including exposure
to adverse conditions is not possible to be ensured by other means, provide and maintain at
no cost to the worker, suitable protective equipment, clothing as necessary and other
facilities as defined by these regulations; and
(d) provide workers who have suffered from an injury or illness at the workplace with first aid,
appropriate transportation from the workplace and access to appropriate medical facilities.
(8) The owner shall ensure that-
(a) adequate training and re-training programs and comprehensible instructions are provided
for workers, at no cost to them, on safety and health matters as well as on the work
assigned;
(b) adequate supervision and control are provided in each shift to secure the safe operation of
the mine;
(c) a system is established so that the names of all persons who are employed belowground
can be accurately known at any time, as well as their probable location; and
(d) all accidents and dangerous occurrences are investigated and appropriate remedial actions
are taken.
31. General responsibilities of supplier, manufacturer, designer and technical consultant. -
(1) A person who designs, manufactures, imports, provides or transfers machinery, equipment or
substances for use in metalliferous mines, shall –
(a) ensure that the machinery, equipment or substances do not entail dangers for the safety
and health of those using them correctly; and
(b) make available-
(i) information concerning their requirement for the correct installation, maintenance
and use of machinery and equipment and the correct storage and use of substances;
(ii) information concerning the hazards of machinery and equipment, the dangerous
properties of hazardous substances and physical agents or products;
(iii) information on how to eliminate or control risks arising from the identified hazards
associated with the products; and
(iv) information regarding designed life span of the machinery for safe operation in
mines.
(2) A person, firm or institute who provides technical studies and consultancy shall –
(a) ensure proper scientific basis to the studies and consultancy along with exemptions and
limitations.
(b) ensure adequate post study technical support whenever required.
32. Responsibilities of contractor. - (1) A contractor deployed in a mine for any work shall-[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 199
a) establish effective ongoing communication and coordination between appropriate levels of
supervisors, officials and senior officials of the mine prior to commencing work, which shall
include provisions for identifying hazards and the measures to eliminate and control risks;
b) ensure arrangements for reporting work related injuries and diseases , ill health and
incidents among his or her workers while performing work in the mine;
c) provide relevant workplace safety and health hazards awareness and training to their
workers prior to commencing and as work progresses as necessary; and
d) ensure compliance of the provisions of the Code and the rules and regulations framed
thereunder with respect to the assigned work related to the contract.
(2) When deploying contractors, the owner, agent and manager shall ensure that-
(a) the same safety and training requirements apply to the contractors and their workers as to
the workers of the establishment;
(b) where required, only such contractors are deployed that have been duly registered or hold
licenses; and
(c) the contract specifies safety and health requirements as well as sanctions and penalties in
case of non-compliance and such contracts shall include the right for mine officials to stop
the work whenever a risk of serious injury is apparent and to suspend operations until the
necessary remedies have been put in place.
(3) When deploying contractors, the owner or agent shall submit to the Chief Inspector-cum-Facilitator
and the Regional Inspector-cum-Facilitator, the details of every contractor engaged in the mine,
indicating the ownership, address with contact details, the contract awarded and a statement showing
the names and address of every person working on behalf of the contractor in the management, control
and direction with respect such contract.
33. Duties of competent person. - Every competent person shall be subject to orders of his or her
senior officials, carry out the duties assigned to him or her in accordance with the provisions of the Code
and of these regulations and orders made thereunder, and shall not –
a) depute another person to perform his or her work without the sanction of his or her superior
official;
b) absent himself or herself without having previously obtained permission from such official
for the term of his or her absence or without having been relieved by a duly competent
person; and
c) without permission from such official, perform during his or her shift any duties other than
those for which person has been appointed.
34. Duties of officials. - (1) Every official shall carry out the duties assigned to him or her by the200 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
manager or assistant manager in accordance with the provisions of the Code and of these regulations
and orders made thereunder.
(2) Every official shall, to the best of his or her power, see that persons under his or her charge
understand and carry out their respective duties properly.
35. Duties and responsibilities of manager. - (1) In every mine daily personal supervision shall be
exercised by the manager:
Provided that in case of working belowground, manager shall visit and examine the working on at
least four days in every week to ensure safety in every respect:
Provided further that at least one visit in every fortnight shall be made during the night shift:
Provided also that where owing to any unavoidable cause, manager is unable to carry out the
aforesaid duties or inspections, manager shall record the reason for the same in the book kept under
sub-regulation (2).
(2) The manager shall maintain, in a bound paged book kept for the purpose or in retrievable non-
editable electronic form, a diary; and shall record therein the result of each of his or her inspections and
also the action taken by manager to rectify the defects noticed, if any.
(3) The manager shall make arrangements for all mining supervisors and other officials to meet him
or her or the assistant manager once in every working day for the purpose of conferring on them
matters connected with their duties.
(4) The manager shall ensure sufficient supply of proper materials and appliances for the safety of
the mine and the persons employed therein; and if he or she be not the owner or agent of the mine,
shall report in writing to the owner or agent, when anything is required for the aforesaid purpose that is
not within the scope of his or her authority to order, and a copy of every such report shall be recorded
in a bound-paged book kept for the purpose or in retrievable and non-editable electronic form.
(5) On receipt of a requisition under sub-regulation (4), the owner or agent shall promptly arrange
to supply the said materials and appliances, and shall within three days of receipt of the requisition,
intimate to the manager in writing the action taken to meet the requisition.
(6) The manager shall assign to every competent person his or her particular duties and take all
possible steps to ensure that every such person understands and carries out the provisions contained in
the Code and rules or regulations made thereunder in a proper manner.
(7) The manager shall provide every mining supervisor with a tracing, up to the date of the last
survey, showing the workings of the district belowground assigned to mining supervisor and such
tracing shall, where any work of reduction or extraction of pillars or blocks of mineral is being carried
out, show clearly the reference of the permission and the manner in which such reduction or extraction
is to be carried out:
Provided that in case of opencast mines, such tracing shall also show the sections of the working under
his or her charge.
(8) The manager shall examine all reports, registers and other records required to be made or kept in
pursuance of the provisions of the Code or of the regulations or orders made thereunder, and shall
countersign the same with date:[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 201
Provided that the manager may, by an order in writing, delegate this duty to an assistant manager
except in cases where a specific provision is made requiring the manager to countersign a report or
register.
(9) The manager shall give attention to, and cause to be carefully investigated any specific
representation or complaint that may be made to manager in writing by an employee of the mine as to
any matter affecting the safety or health of persons in or about the mine.
(10) When there occurs in a mine any accident, resulting in bodily injury or loss of life to any person as
specified in section 10 of the Code or any dangerous occurrence, as specified under section 11 of the
Code, the manager shall, as soon as possible, inspect the site of the accident or the dangerous
occurrence, as the case may be, and shall also, either himself or herself or through an assistant
manager or safety officer, have an inquiry made into the cause and circumstances attending the same
and the result of every such enquiry along with a plan and sections and, wherever practicable, a
photograph or photographs of the site of the accident or dangerous occurrence showing details, shall be
recorded in a bound paged book kept for the purpose or in retrievable and non-editable electronic form
and copy thereof shall be furnished to the Chief Inspector-cum-Facilitator and Regional Inspector-cum-
Facilitator within fifteen days of the accident or dangerous occurrence.
(11) The manager shall perform such other duties as have been prescribed in that behalf under the
provisions of the Code, rules, regulations, or orders made thereunder.
(12) The manager may suspend or take such disciplinary action against any employee for contravention
of any of the provisions of the Code or the regulations or orders made thereunder.
36. Duties and responsibilities of assistant manager. - (1) The assistant manager shall carry out
the duties assigned to him or her by the manager, and shall see that in the part of the mine assigned to
him or her by the manager, all work is carried out in accordance with the provisions of the Code and of
the regulations and orders made thereunder.
(2) The assistant manager shall, subject to the orders of the manager, visit and examine the
workings under his or her charge, or part thereof, on every working day.
(3) The assistant manager shall, from time to time, carefully examine every travelable part of the
mine or part thereof placed under his or her charge, whether frequented by work persons or not.
(4) In the absence of the manager, the assistant manager shall have the same responsibility,
discharge the same duties and be subject to the same liabilities as the manager, but not so as to
exempt the manager therefrom.
(5) The assistant manager shall, in a bound paged book kept for the purpose or in retrievable and
non-editable electronic form, record the result of each of his or her inspections and also the action taken
by him to rectify the defects noticed, if any.
37. Duties of ventilation officer. - (1) The ventilation officer shall-
(a) ensure the observance of all regulations and orders concerning ventilation, spontaneous
heating, fire, gas and dust including dust suppression and shall advise the manager, if any202 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
alteration is required in the ventilation system to ensure adequacy of ventilation in
compliance with these regulations or orders;
(b) advise the manager on day to day problems of ventilation, gas, dust, spontaneous heating
and fire;
(c) maintain close liaison with the assistant managers and other officials, and assist them in
their day-to-day ventilation problems;
(d) carry out ventilation surveys of the mine and undertake any other special work relating
thereto as may be directed by the manager from time to time;
(e) take such steps as are necessary to ensure compliance with the ventilation standards
required in terms of these regulations or otherwise;
(f) check the speed of main mechanical ventilator, amperage drawn by its electric motor, and
fan drift water gauge at least once in a day and he or she shall investigate any unusual
change in the water gauge and report to the manager;
(g) determine the efficiency of the main mechanical ventilator once at least in every three
months and get the fan blades and the fan drift cleaned when necessary;
(h) ensure that copies of standing orders in the event of stoppage of the main mechanical
ventilator are posted at conspicuous places at the mine, and also ensure that the persons
concerned understand the instructions contained therein;
(i) ensure the correct sitting and installation of auxiliary and booster fans belowground;
(j) examine at frequent intervals all ventilation appliances like doors, brattices, air crossings,
regulators, stoppings, booster and auxiliary fans, ventilation ducting and other devices of
ventilation control in the mine and report any defect in the same to the manager;
(k) take necessary steps to stop any leakage through any of the devices and ensure that the
ventilation appliances are maintained in good order;
(l) ensure that sufficient quantity of good air is coursed into all working places and reaches all
other working belowground and for this purpose, shall-
(i) see that the ventilation stoppings, brattices, etc. are constructed as per specifications
and are kept extended sufficiently;
(ii) see that measurements of air quantity, temperature and humidity are regularly taken
as specified and bring up-to-date the entries on the check boards provided at each
air measurement station;
(iii) determine the Ventilation Efficiency Quotient (VEQ) ;
(iv) see that mine air samples are properly collected at the appointed time and place, and
analysed within forty eight hours of taking thereof; and
(v) make observations for inflammable and any other harmful gases;
(m) maintain separate tracing of the ventilation and rescue plans and bring them up-to-date;
(n) bring to the notice of surveyor any changes in the ventilation system or ventilation
appliances and shall ensure that all old markings on the ventilation and rescue plans are
corrected and new ventilation circuits are shown forthwith;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 203
(o) regularly check the barometer provided at the mine and report any unusual change in
barometric pressure to the manager for appropriate actions;
(p) take care of the instruments and apparatus used in the mines for environmental monitoring
and ensure that all such instruments are maintained in good order and calibrated at
specified intervals;
(q) regularly visit returns of working districts and old workings including fire stoppings, if
necessary, for symptoms of spontaneous heating and fire and report to the manager
forthwith any such symptoms observed by him or her and shall himself or herself take such
steps as may be immediately necessary for the safety of the workers;
(r) check the firefighting measures and take necessary steps by regular rehearsals to ensure
that all fire fighting equipment are maintained in working order and the concerned staff are
fit and conversant with their duties in the event of a fire in the mine;
(s) take necessary steps for proper cleaning, treatment and suppression of dust in the mine
and see that the arrangements for wet-cutting at the faces and water spraying at and
within ninety meters of the working places are properly installed and function satisfactorily;
(t) ensure that the samples of airborne dust are regularly taken in the specified manner;
(u) collect air samples from sealed off areas, exhaust gases from diesel vehicles and from such
other places as may be required by the manager;
(v) ensure that all records and reports relating to ventilation, spontaneous heating, fire, gas
and dust are kept up-to-date and entries are made regularly in the check boards for
ventilation:
Provided that nothing contained above shall exempt the manager, assistant manager, surveyor,
mining supervisor, assistant mining supervisor or any other competent person concerned, from any
corresponding duties and responsibilities specified for them in these regulations or any orders made
thereunder; and
(w) assist the manager in any matter relating to the ventilation of the mine.
(2) No duties other than those specified above shall be assigned to the ventilation officer except in
an emergency.
(3) The ventilation officer shall maintain, in a bound paged book or in retrievable and non-editable
electronic form, a detailed record of the work performed by him or her every day.
38. Duties and responsibilities of mining supervisor. - (1) The mining supervisor shall subject to
the orders of superior officials, have responsibility, charge and control of such part of the mine, and
shall carry out such duties, as may be assigned to him or her by the manager.
(2) The mining supervisor shall-
(a) while on duty, carry a tracing of the working of such district and shall keep the tracing up-
to-date;
(b) in his or her district, make the inspections and reports required by these regulations;
(c) ensure that the subordinate officials and competent persons in his or her district carry out
their respective duties in a proper manner;204 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(d) ensure that mining operations in the part of the mine assigned to him or her under sub-
regulation (1) are carried out as per the code of practices framed under these regulations.
(3) The mining supervisor shall, to the best of his or her power, enforce in his or her district the
provisions of the Code, of these regulations and orders made thereunder, and shall, subject to the
control of the manager and the assistant manager, if any, give such directions as may be necessary to
ensure compliance with those provisions, and to secure the safety of the district and the safety and
proper discipline of the persons employed therein.
(4) The mining supervisor shall see that sufficient supplies of timber, support materials, brattice, tools
and tackles, appliances, and other necessaries required for the safe working of his or her district are
kept at convenient places therein.
(5) The mining supervisor shall-
(a) ensure that every air-crossing, stopping, door, brattice and other ventilation device is
maintained in good order;
(b) ensure that the ventilation is effective in his or her district; and when brattices or air pipes
or ducts are required to be used for the ventilation of the working places, he or she shall
see that they are kept sufficiently advanced so that an adequate amount of air reaches
every such working place;
(c) have power to send out of the mine any person under his or her charge who infringes or
attempts to infringe any provision of the Code or of the regulations or orders made
thereunder, or fails to carry out any direction given with regard to safety, and shall report
such matter in writing to the manager;
(d) ensure that all tracks and tramlines are properly laid, graded, ballasted or otherwise
packed;
(e) see that the manholes on the haulage roadways are kept safe, clear of any obstruction, and
properly white-washed;
(f) ensure that the stop-blocks, runway switches and other safety devices are fixed and used
as required under the regulations, drag or back-stays are provided and regularly used
behind tubs ascending inclines and that a sufficient supply of suitable sprags is provided
where tubs are loaded on a gradient or lowered down a gradient by hand;
(g) stop the use forthwith if he or she finds any of the ropes, chains, signals, brakes, jig wheels
and post or other apparatus in use in his or her district to be in an unsafe condition;
(h) ensure that, except for the purpose of inspection, examination and repairs every person other
than an official or a haulage attendant travels by the travelling roadway; and
(i) give prompt attention to the removal of any danger observed or reported to him or, and
shall see that dangerous places are adequately fenced off.
(6) In case of opencast workings, the mining supervisor shall ensure that-
a) sides of benches are kept properly dressed;
b) stability of benches is not endangered;
c) haul roads are kept maintained;
d) stability of overburden dumps is not endangered;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 205
e) there is no over-crowding of men and machinery at the working faces;
f) adequate lighting is provided at area under his or her control;
g) adequate precautions as laid down in these regulations are taken before blasting operations
are conducted;
h) all machinery and plant are operated in safe and secured manner; and
i) dust control measures are implemented.
(7) The mining supervisor shall-
(a) devote the whole of his or her time to his or her duties and visit each working place in his
or her district as often as may be necessary or possible;
(b) not, except for justifiable cause, leave the district in his or her charge until he or she had
finished the inspections required under these regulations and any other duties that he or
she is required to perform, or until relieved by a duly appointed substitute;
(c) if the mine is working in a continuous succession of shifts, confer with the official
succeeding him or her and give succeeding official such information as may be necessary
for the safety of his or her district and of persons employed therein; and
(d) at the end of the shift, he or she shall record in a bound-paged book kept for the purpose
or in retrievable and non-editable electronic form a general report in the specified format on
the performance of all his or her duties during the shift, including anything concerning the
proper working of the mine and the safety and discipline of persons employed in his or her
district.
39. Duties and responsibilities of mechanical supervisor. - (1) The Mechanical supervisor shall
subject to the orders of superior officials, have responsibility, charge of such number of plant and
machinery and shall carry out such duties, as may be assigned to him or her by the manager.
(2) The mechanical supervisor shall-
(a) while on duty make the inspections of plant and machinery in his or her charge and ensure
that these are in safe working order;
(b) supervise the erection, commissioning, repair, maintenance, decommissioning and marching
of machinery placed under his or her charge and ensure that all works are carried out in
accordance with respective Code of Practices framed under these regulations;
(c) ensure that the subordinate officials and competent persons under his or her charge carry
out their respective duties in accordance with Code of Practices framed under these
regulations;
(d) stop the use forthwith if person finds any of the plant, machinery or other apparatus in use
under his or her charge to be in an unsafe condition and the same shall be reported to the
Engineer in writing; and206 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(e) at the end of his or her shift, record in a bound-paged book kept for the purpose or in
retrievable and non-editable electronic form, a report on all activities concerning proper and
safe working of plant and machinery under his or her charge.
40. Duties and responsibilities of assistant mining supervisors. - (1) The assistant mining
supervisor or other competent person appointed under regulation 122 shall, subject to orders of
superior officials, have responsibility, charge and control of the district of the mine assigned to him or
her by the manager or assistant manager.
(2) An assistant mining supervisor shall-
(a) take reasonable means to ensure proper observance of the requirements of the Code and
of the regulations, and orders made thereunder by persons under his or her charge and
shall, as soon as practicable, report any contravention thereof to his or her superior official;
(b) make such inspection and reports as are required by these regulations, and in making such
examination, he or she shall pay particular attention to checking supports and for presence
of gas;
(c) except in the case of a mine working in a continuous succession of shifts, on completion of
the first inspection of the district, proceed to the station specified under regulation 122 and
instruct all persons as to their places of work and as to any special precautions necessary to
be observed by them;
(d) if he or she finds any person in a place other than the one assigned to him or her, he or
she may order such person out of the mine, and shall forthwith report the matter to his or
her superior official;
(e) ensure that no inexperienced person is employed on any work except under the supervision
of an experienced person;
(f) see that the roof and sides of all traveling roadways, and working places in his or her
district are made and kept secure;
(g) where the height of any working place in the district in his or her charge measured from
floor to roof exceeds three meters, see that a suitable wooden bunton or pole by which all
parts of the roof may be effectively tested by a person standing on the floor and a ladder of
suitable length are kept at convenient places in the district;
(h) report to his or her superior official any deficiency in timber, support materials, appliances
and other necessaries required for the safe working of the district;
(i) where either of the two ways affording means of egress from the district to the surface is
not ordinarily used for travelling, travel, once at least in every seven days, the whole of
such roadway in order to make himself or herself thoroughly acquainted with the same; and
(j) see that no support is withdrawn except by means of a safety prop-withdrawer.
(3) If assistant mining supervisor observes any dangerous place during the course of his or her
inspections or if any danger at a place where work persons are employed is reported to him, he or she
shall, if the danger is not possible to be removed forthwith, withdraw all persons from such place and[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 207
shall not leave the place until the danger has been removed in his or her presence or all approaches to
the place have been fenced off so as to prevent persons from inadvertently entering such place.
(4) The assistant mining supervisor shall-
(a) take care that any dangerous operation is carried out with due precaution, and in such
cases, shall be present throughout whenever any work of clearing falls of ground and
setting of supports therein is being carried out;
(b) cause the entrance to every place which is not in actual use or in course of working or
extension, to be fenced across the whole width, so as to prevent persons from inadvertently
entering such place;
(c) if he or she finds any accumulation of inflammable or noxious gases, he or she take such
precautions as specified in regulation 151 and shall not remove such accumulation until he
or she has received instructions in that behalf from his or her superior official;
d) on receipt of information of an accident to any person in his or her district, proceed at once
to the place of accident, inspect the place and, if required, supervise the rescue operations,
and shall report or send notice of the accident to the manager or assistant manager;
e) devote the whole of his or her time to his or her duties, and shall not leave the mine until
the end of the shift or until relieved by a duly appointed substitute;
(f) if the mine is worked by a continuous succession of shifts, before leaving his or her district,
confer with the assistant mining supervisor or other competent person succeeding him or
her, and shall acquaint him or her with all matters requiring his or her personal attention
and give him or her such other information as may be necessary for the safety of his or her
district and of the persons employed therein; and
(g) see that mining operations in the district of the mine assigned to him or her under sub-
regulation (1) are carried out as per the code of practices framed under these regulations.
(5) In case of opencast workings, the assistant mining supervisor shall ensure that-
(a) sides of benches are kept properly dressed;
(b) stability of benches is not endangered;
(c) haul roads are kept maintained;
(d) stability of overburden dumps is not endangered; and
(e) dust control measures are implemented.
41. Duties and responsibilities of blaster. - The blasters shall –
a) carry out his or her duties in accordance with the provisions of the regulations and of any
orders made thereunder with respect to the transport and use of explosives;
b) be responsible for the observance by his or her assistants, if any, of such provisions and of
any direction with a view to safety which may be given to them by a superior official;
c) not hand over any explosives to any un-authorised person;
d) ensure that clay, sand or other suitable stemming material is available in sufficient
quantities at convenient places;208 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
e) be present when shots are being charged and stemmed; and shall himself or herself fire the
shots; and
f) be responsible, when a shot has misfired, for seeing that the place is adequately fenced,
and that the provisions of regulation 179 are strictly observed.
42. Duties of support person. - The support person shall-
(a) carry out the orders of the manager or assistant manager, mining supervisor, assistant
mining supervisor or other competent person with respect to the securing of hangwall,
footwall and back or roof and other working places;
(b) ensure placement of supports are strictly in accordance to the support plan;
(c) at once report to the assistant mining supervisor or other competent person any shortage
of support materials in his or her district; and
(d) in case of use of timber, be responsible to see that woodcuttings are not left in any working
belowground.
43. Duties of attendant of main mechanical ventilator. - The attendant of the main mechanical
ventilator shall-
(a) keep the ventilator running at the speed fixed by the manager;
(b) examine the machinery and observe the pressure recording or water gauge and the speed-
indicator at intervals of not more than one hour, and shall enter the readings of the
indicator in a bound-paged book kept for the purpose at the fan-house or in retrievable and
non-editable electronic form;
(c) immediately report to his or her superior official any stoppage of, damage to, or defect or
derangement in the machinery, or any unusual variation in the water-gauge or other
indicators and shall also immediately report to him or her any unusual circumstances in
regard to mine ventilation which may come to his or her notice; and
(d) not leave place until relieved by a duly appointed substitute where the ventilator is
continuously operated.
44. Duties of lamp-room in-charge. - The person in charge of a lamp-room shall-
(a) be responsible for ensuring that all lamps in the lamp-room including safety lamps are
properly maintained as per manufacturer’s specification and in accordance with the
provisions of these regulations;
(b) see that the lamp-room is kept in a neat and tidy condition, and that all damaged and
defective gauges, glasses and other parts of safety lamps are not kept or stored in such
room;
(c) see that fire extinguishers or other means of dealing with fires provided in the lamp room
are in good condition and readily available for use;
(d) see that all records required by the regulations for the issue, return and maintenance of
safety lamps are properly maintained;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 209
(e) see that every person going belowground is provided with a lamp having adequate charge
to sustain at least whole of the shift; and
(f) carry out such other duties relating to the maintenance, issue and return of safety lamps as
may be specified by the manager or the assistant manager.
45. Duties and responsibilities of surveyor. - (1) The surveyor shall-
(a) make such accurate surveys and levellings, and prepare such plans and sections and
tracings thereof, as the manager may direct or as may be required by the Code or by the
regulations or orders made thereunder, and shall sign or e-sign the plans, sections and
tracings and date his or her signature; and
(b) be responsible for the accuracy of any plan and section, or tracings thereof that has been
prepared and signed by him.
(2) The surveyor shall record in a bound-paged book kept for the purpose or in retrievable and non-
editable electronic form –
(a) the full facts when working of the mine have approached to about 75 meters from the mine
boundary, or from disused or waterlogged working;
(b) any doubt which may arise or exist concerning the accuracy of the plans and sections
prepared under these regulations; and
(c) any other matter relating to the preparation of the plans and sections that he or she may
like to bring to the notice of the manager, and every entry in the book or electronic form
shall be signed or e-signed and dated by the surveyor and countersigned or e-signed and
dated by the manager:
Provided that where in any mine two or more surveyors are employed, each of the surveyors shall
make the entries aforesaid in respect of the workings in their respective jurisdiction or of the plans and
sections in his or her charge.
(3) Nothing in sub-regulation (2) shall absolve the owner, agent or manager of his or her responsibility
under the provisions of the Code and under these regulations or orders made thereunder.
46. Duties and responsibilities of engineer. - The engineer appointed for the purpose shall-
(a) subject to the orders of the manager and other superior official, hold general charge of all
machinery at the mine; and shall be responsible for the proper installation, maintenance
and safe working of such machinery;
(b) when any machinery is shifted or newly installed, ensure that it is given a trial run before it
is put into use, and shall be present during every such trial run;
(c) be present throughout whenever any work of installing, changing or recapping of any
winding rope, or of installing, changing or annealing any suspension gear, is being carried
on;
(d) ensure that the provisions of the Code and of these regulations and orders made
thereunder relating to the installation, maintenance, operation or examination of machinery
and plant are properly carried out by himself or herself and by subordinate officials,
competent persons or work persons as the case may be, appointed for the purpose; and210 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(e) if mechanics, electricians or other subordinate officials or competent persons are appointed
for the purpose, examine all reports, registers and other records relating to the installation,
maintenance, operation or examination of machinery and plant required to be made or kept
in pursuance of the Code, these regulations or orders made thereunder, and shall
countersign the same and date his or her signature; and
47. Duties of Winding Engine Operator. – (1) A Winding engine operator who possessing winding
engine operator’s certificate of competency shall-
(a) at the beginning of his or her shift, examine the engine, brakes and all appliances in his or
her charge, and satisfy himself or herself that they are in good working order;
(b) during their respective shifts, keep the winding engine and apparatus connected therewith
properly cleaned and oiled, and shall ensure that the engine room is clean and free of
inflammable material;
(c) immediately report in writing to the engineer or other competent person appointed for the
purpose any defect which he or she has noticed in the engine, brake, indicator, drum, rope
or other appliances under his or her charge;
(d) not allow any un-authorised person to enter the engine room or in any way to interfere with
the engine;
(e) thoroughly acquaint himself or herself with, and carefully attend to, the prescribed code of
signals and shall not start the engine until he or she has received the proper signal to do
so:
Provided that if the signal is indistinct, he or she shall not start the engine until it has been
repeated and he or she clearly understands it;
(f) avoid jerk in starting, running and stopping the engine, and shall cause the cage or other
means of conveyance to be brought gently to rest at any stopping place;
(g) while persons are being lowered or raised in the shaft, the winding engine operator shall
not drive the engine at a speed higher than that fixed by the manager for man-riding
purposes and approved by the Regional Inspector-cum-Facilitator;
(h) not un-clutch the drum of the winder until he or she has assured himself or herself
immediately beforehand by testing the brake of the drum against the full power of the
engine to see that the brake is in proper condition to hold the load suspended from the said
drum:
Provided that when the drum is un-clutched, winding engine operator shall use the brake only for
the purpose of maintaining such drum stationary, and shall not lower men or materials from an un-
clutched drum;
(i) on no pretext, leave the handle or brake whilst the engine is in motion, or while persons are
riding a cage or other means of conveyance in the shaft; and
(j) not leave the engine whilst persons are at work in the shaft and whenever the winding engine
operator has occasion to leave the engine, the winding engine operator shall cut off the
power and secure the drums with brake;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 211
(2) The winding engine operator of a winding engine by which persons are lowered or raised in a
shaft, shall not leave the engine at the end of his or her shift unless all the persons have come out of
the shaft or unless relieved by a duly appointed substitute.
48. Duties of pit top attendant, bellman and signalman. - (1) Every pit top attendant, bellman
and signalman shall -
(a) subject to the orders of a superior official, have full control of the top or bottom of shaft or
winze or landing or inset, as the case may be, and shall report to such official any person
who, without authority, gives a signal or disobeys instructions;
(b) thoroughly acquaint himself or herself with, and carefully attend to, the prescribed code of
signals, and shall properly transmit the signals by the means provided:
Provided that the pit top attendant, bellman or signalman shall not act on any signal, the
correctness of which he or she is in doubt, except a signal which he or she believes to be “to stop” and
shall not allow any un-authorised person to give signals;
(c) immediately report to his or her superior official any defect in the signaling installation;
(d) devote the whole of his or her time to his or her duties, and shall not leave his or her post
during the period of his or her duty;
(e) where persons are raised or lowered in the shaft, he or she shall not leave his or her post
at the end of his or her shift unless all the persons have come out of the shaft or unless
relieved by a duly appointed substitute;
(f) not allow more than the authorised number of persons to enter the cage or other means of
conveyance at any one time;
(g) not, unless specially authorised in writing by the manager in that behalf, allow any person
when riding in a cage or other means of conveyance, to take with him or her any bulky
material other than tools and instruments:
Provided that nothing in this clause shall be deemed to prohibit the carrying, in a cage or other
means of conveyance, of the explosives by a blaster or other competent person;
(h) after any stoppage of winding for repairs or for any other cause for a period exceeding two
hours, not allow any person to ride in the cage or other means of conveyance unless it has
been run at least one complete trip up and down the working portion of the shaft;
(i) not allow any person to ride on the top or edge of any cage or other means of conveyance
except when engaged in examination, repair or any other work in the shaft;
(j) after persons have entered the cage, see that the cage gates on both sides are in position
and closed, before signaling for the cage to be lowered or raised;
(k) not allow any un-authorised person to handle tubs in or out of the cage;
(l) while tubs are being lowered or raised, see that the catches are holding the tubs properly
before signaling the cage or other means of conveyance away and if he or she notices any
defect in the tub-catches, he or she shall immediately inform his or her superior official;
(m) at any entrance into a shaft or inset which is provided with gates or fences not worked by
the cage or other means of conveyance, not begin to remove the gate or fence until the212 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
cage or other means of conveyance has stopped at the entrance, and shall close the gate
before he or she has signalled the cage or other means of conveyance away and he or she
shall not permit any un-authorised person to open or interfere with the gate;
(n) see that all fences and gates provided at the top of the shaft, winze, landing or at any inset
are in position;
(o) not permit any un-authorised person to remove a fence or gate and if he or she notices any
defect in such fence or gate, immediately inform his or her superior official;
(p) keep the top of the shaft or the inset and the floor of every cage free from loose material;
(q) when long timber, pipes, rails or other material projecting over the top of a cage or other
means of conveyance are lowered or raised, ensure that the projecting ends are securely
fastened to the rope, chains or bow;
(r) when he or she suspects that the cages are not working smoothly in the shaft or winze or
when he or she hears anything unusual happening in the shaft or winze while the winding
engine is working, immediately give signal to the winding engineman to stop the engine.
(2) The pit top attendant shall -
(a) at the beginning of his or her shift, see that the keps are in proper working order;
(b) when he or she is informed of any danger in the shaft, not allow any person to descend
except for the purpose of examination or repair and during the time that such examination
or repair is going on, be on duty and listen for signals; and
(c) not permit any person descending the shaft to carry any intoxicating drink or drug, or allow
any intoxicated person to descend.
(3) Where the manager so directs by an order in writing, the pit top attendant or bellman, as the case
may be, shall also carry out the duties of a signalman.
(4) The pit top attendant shall not leave his or her place of work unless duly relieved by his or her
successor.
49. Duties of haulage engine operator and haulage attendant, etc. - (1) At the beginning of his
or her shift, the haulage engine operator shall examine the engine, its brake and all appliances in his or
her charge, and shall satisfy himself or herself that they are in good working order.
(2) The haulage engine operator shall, during his or her shift keep the haulage engine and apparatus
connected therewith properly cleaned and oiled, and the engine-room clean and free of inflammable
material.
(3) The haulage engine operator shall report immediately to the engineer or other competent person
appointed for the purpose any defect which he or she has noticed in the engine, brake, drum, rope or
other appliances under his or her charge.
(4) Whenever the haulage engine operator has occasion to leave the engine, he or she shall cut off the
power and secure the engine with the brake.
(5) The haulage engine operator and haulage attendant shall not allow any un-authorised person to
enter the engine-room or in any way to interfere with the engine or signal, as the case may be.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 213
(6) Every haulage engine operator and haulage attendant shall thoroughly acquaint themselves with,
and carefully attend to, the prescribed code of signals.
(7) The haulage engine operator shall not start the engine until he or she has received the proper signal
to do so and if the signal is indistinct, shall not start the engine until it has been repeated and he or she
clearly understands it.
(8) The person in charge at the top of any haulage plane or incline shall ensure that the stop-blocks are
blocking the way, before allowing any tub to be brought on to the top landing; and shall cause the tubs
to be securely coupled up to each other and to the rope or chain, before the stop block is opened. In
case any alternative safety appliance is provided, the person in charge at the top shall cause the same
to be brought into use on every such occasion.
(9) The person who is responsible for the attachment, to the haulage rope, of any tub or set of tubs
at any stopping place on any haulage plane or incline, shall ensure that no person remains in a position
of danger at or near such stopping place while the rope is in motion.
(10) The person in charge of any tubs or set of tubs, which it is intended to send up any haulage plane
or incline on which drags or back-stays are required to be used, shall securely fix the drag or back-stay
or cause it to be so fixed, before such tub or set of tubs is set in motion.
(11) The person in charge at the top or bottom of the incline shall ensure that no un-authorised person
rides on any tub.
(12) Before a train of side-tipping tubs is set in motion, the person in charge shall ensure that the
safety catches of all such tubs are properly secured.
50. Duties of locomotive operator. - The locomotive operator shall -
(a) before commencing work in his or her shift, ensure that the audible signal, lights and the
brakes of the locomotive are in proper working order;
(b) not work the locomotive unless the locomotive is fitted with sufficient headlights;
(c) immediately report to the engineer or other competent person appointed for the purpose,
any defect which he or she has noticed in the locomotive or any part or fitting thereof;
(d) not set the locomotive in motion until audible warning has been given by him or her to
persons whose safety may be endangered and also give the audible warning when the
locomotive is approaching a level crossing or any place where any person is at work or
where the operator’s sight is intercepted;
(e) not leave a locomotive unattended away from the place where it is housed, unless he or
she has ensured that it cannot be set in motion by any un-authorised person;
(f) ensure that no un-authorised person drives, handles or rides on a locomotive; and
(g) ensure that when tubs or wagons are being pushed in front of the locomotive, the shunter
shall accompany the leading wagon.
51. Duties of cutting or loading machine operator and mechanic or fitter. - (1) When a
machine is required to work on a gradient exceeding 1 in 5, an effective contrivance to prevent the
machine running back shall be used.214 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) No cutting or loading machine shall be flitted or otherwise moved with the cutting or loading tool in
motion, except in the actual process of cutting or loading, and if the cutting or loading tool, as the case
may be, is not possible to be locked out of gear securely, it shall be removed before flitting is started.
(3) No person shall make any repair or adjustment to a cutting or loading machine or shall put in or
take out a pick, until person has made such arrangements as will prevent the mechanism being
inadvertently put into motion while such operation is being performed.
(4) No person shall open or replace the cover of any electrical part of a cutting or loading machine,
except under the supervision and in the presence of an engineer, electrician or other competent person
appointed for the purpose.
(5) The loading machine operator shall-
(a) before commencing work in his or her shift, loading machine operator shall ensure that the
audible signal, lights and the brakes of the machine are in proper working order;
(b) not work the machine unless the machine is fitted with sufficient headlights;
(c) immediately report to the engineer or other competent person appointed for the purpose
any defect which he or she has noticed in the machine or any part or fitting thereof; and
(d) not set the machine in motion until audible warning has been given by him or her to
persons whose safety may be endangered and also give the audible warning when the
machine is approaching a level crossing or any place where any person is at work or where
the operator’s sight is intercepted;
(6) The cutting or loading machine operator shall not leave the machine unless he or she has completely
cut off the power and has assured himself or herself that the moving parts of the machine shall not be
inadvertently set in motion.
(7) During loading, the machine operator shall not overload or project any material on the truck, tipper
or dumper beyond the side of its body.
52. Duties of magazine in-charge. - The magazine in-charge shall -
(a) subject to the orders of superior officials, be responsible for the proper receipt, storage and
issue of explosives in and from the magazine;
(b) maintain such records of explosives received, stored and issued under clause (a), as are
required under the provisions of the Code, the Explosives Act, 1884, (4 of 1884) and the
rules, regulations or orders made thereunder;
(c) not issue explosives to any person other than a competent person and when explosives are
returned to the magazine, shall reissue such explosives before issuing fresh stock;
(d) record in a bound paged book in retrievable and non-editable electronic form, kept for the
purpose, the names of various competent persons and the quantity and nature of
explosives issued to each of them; and similarly record the quantity and nature of
explosives returned to the magazine by each such person;
(e) securely lock each canister before issuing it to the competent persons and also check
whether the canister is returned to the magazine in locked condition and shall not issue[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 215
explosive in any canister which is not in proper repair or which is not possible to be securely
locked;
(f) not allow any un-authorised person to enter the magazine;
(g) not issue any explosive for which the stipulated shelf life has expired;
(h) if he or she discovers any shortage of explosives in the magazine, forthwith inform the
manager in writing; and
(i) ensure that, no fire, smoking lights or articles or substances of a flammable nature or liable
to ignition, or as to cause or communicate fire or explosion such as acids, petroleum,
calcium carbide, compressed gasses or such other hazardous substances, or radio or cell
phone or radio frequency operated device or any such communication system or devices
shall be allowed at any time within 15 meters from the magazine.
53. Duties of register keeper and attendance clerk, etc. - (1) Every person appointed to keep
registers or other records required to be kept by or under the Code or under these regulations, or
orders made thereunder, or to make entries therein, shall make the necessary entries in ink or in
retrievable and non-editable electronic form.
(2) During the whole time that persons are at work, the attendance clerk shall remain on duty at
attendance cabin which shall be provided near the workplaces, or in case of workings belowground, near
the outlet used by the work persons to enter and leave such workings or biometric.
(3) No person who is not an employee of the mine or is not entitled to enter the mine under the Code or
under the regulations, or orders made thereunder, or is not so authorised by the manager, shall enter
the mine.
(4) It shall be duty of the attendance clerk to ensure that no such person enters the mine and if any
such person forcibly enters the mine, the attendance clerk shall immediately report the matter in writing
to the manager.
(5) If after the commencement of a shift, any official or a competent person has not got his or her
attendance recorded in the register or biometric maintained under clause (v) of sub-section (a) of
section 33 of the Code, the attendance clerk concerned shall, within two hours after the commencement
of the shift, report the fact in writing or by other means prescribed by the Chief Inspector-cum-
Facilitator, to the manager or the assistant manager or other official in charge of the shift.
54. Duties of operators of heavy earth moving machineries and plants excluding trucks,
tippers and dumpers. - Every person authorised to operate heavy earth moving machineries such as
shovel or excavator, etc. shall-
(a) inspect the machine assigned to him or her in the beginning of the working shift and test
the various systems, sub-systems and protective devices, as stipulated in this respect by
the engineer in consultation with the manufacturer or supplier;
(b) not take out the machine for work nor shall operate the machine unless he or she is
satisfied that it is mechanically sound and in efficient working order;216 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(c) maintain a record of every inspection made under clause (a) in a bound paged book kept
for the purpose or in retrievable and non-editable electronic form and shall sign or e-sign
every entry made therein;
(d) keep the cabin or engine room and all window glasses clean;
(e) keep the walkways, hand-rails, ladder-ways free of loose tools, lubricants or other material
that might fall or cause a tripping hazard;
(f) not allow any un-authorised person to ride on the machine;
(g) not move or operate the machine when persons are in such proximity as to be endangered;
(h) not swing the bucket over the passing haulage units or over the cabin of units being
loaded;
(i) lower the bucket to ground, switch off the power supply to the machine or stop the prime
mover and lock the cabin door before leaving the machine;
(j) strictly adhere to the codes of practice prepared under regulation 108 while operating the
machinery;
(k) the operators of heavy earth moving machinery shall not use mobile phones, earphones, or
any personal electronic device by oneself, while operation; and
(l) enter the condition of the machine at the end of the working shift in the register or book
maintained under clause (c) for necessary information of his or her successor.
55. Duties of truck, tipper and dumper operator. - (1) Every person authorised to operate trucks,
tippers and dumpers in a mine shall -
(a) inspect the machine assigned to him or her in the beginning of his or her shift and test the
various systems, sub-systems and protective devices;
(b) not take out the machine for work nor shall he or she operate the machine unless he or she
is satisfied that it is mechanically sound and in efficient working order;
(c) maintain a record of every inspection made under clause (a) in a bound paged book kept
for the purpose or in retrievable and non-editable electronic form and shall sign or e-sign
every entry made therein;
(d) not drive the machine under the his or her charge too fast, shall avoid distractions, and
drive defensively, not attempt to overtake another vehicle unless truck, tipper and dumper
operator can see clearly far enough ahead to be sure that he or she can pass it safely and
sound the audible warning signal before overtaking;
(e) when approaching a stripping or loading equipment, sound the audible warning signal and
not attempt to pass the stripping equipment until truck, tipper and dumper operator has
received proper audible signal in reply;
(f) before crossing a road or railway line, reduce truck, tipper and dumper speed, look in both
directions along the road or railway line and proceed across the road or line only if it is safe
to do so;
(g) sound the audible warning signal while approaching a blind corner or any other points from
where persons may walk in front unexpectedly;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 217
(h) not operate the truck, tipper or dumper in reverse unless truck, tipper and dumper operator
has a clear view of the area behind and give an audible warning signal before reversing a
truck, tipper or dumper;
(i) be sure of clearance before driving through areas such as tunnels, archway and plant
structures,
(j) strictly adhere to the transport rules made under regulation 107 while operating the truck,
tipper or dumper; and
(k) enter the condition of the truck, tipper or dumper at the end of the working his or her shift
in the register or book maintained under clause (c) or in electronic form, for necessary
information of his or her successor.
(2) The operator of trucks, tippers or dumpers shall ensure that the vehicle is not overloaded and that
the material is not loaded in a truck, tipper or dumper so as to project horizontally beyond the sides of
its body and that any material projecting beyond the front or rear is indicated by a red flag during day
and by red light after day light hours.
(3) The operator of trucks, tippers or dumpers shall not allow any un-authorised person to ride on the
vehicle.
(4) The operators of trucks, tippers or dumpers shall not operate the vehicle in fog or mist without
taking adequate precautions as may be specified by the manager.
(5) The operators of truck, tipper or dumper shall not use mobile phones, earphones, or any personal
electronic device by oneself, while driving.218 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER – V
PLANS AND SECTIONS
56. General requirements about mine plans. – (1) Every plan or section prepared or submitted in
accordance with the provisions of these regulations shall,
(a) specify the name of the mine and of the owner, and the purpose for which the plan is
prepared;
(b) show the georeferenced mine boundary and mining lease boundary.
(c) show the true north, or the magnetic meridian and the date of the later;
(d) specify, in case of printed plans and sections, the scale of the plan at least twenty five
centimetres long and suitably subdivided;
(e) unless otherwise provided, be on a scale having a representative factor of -
(i) 2,000 : 1, in case of mines having large opencast working and also in case of surface
plans of large leasehold areas ; and
(ii) 1,000 : 1, in other cases:
Provided that the Chief Inspector-cum-Facilitator may, by an order in writing and subject to
such conditions as may be specified therein, permit or require the plans to be prepared on any other
suitable scale;
(f) be properly inked or coloured printed on durable paper, tracing cloth or on polyester tracing
film of not less than 100 micro gauge and be kept in good condition or in non-editable digital
format;
(g) have an abstract of all statutory restrictions in respect of any specified working with a Geo
reference points or lines or areas as the case may be; and
(h) Plans and sections may be prepared, maintained, stored and uploaded in standard digital
format as may be specified by the Chief Inspector-cum-Facilitator, from time to time by a
general order.
(2) The conventions shown in the Schedule shall be used in preparing all plans and sections
required by these regulations.
(3) The plans and sections required by these regulations shall be accurate within such limits of error
as the Chief Inspector-cum-Facilitator may specify by a general order. The georeferenced mine boundary
and mining lease boundary shall be marked on the plans and sections.
(4) The plans and sections required by these regulations shall be maintained corrected up-to-date
which is not earlier than three months except in case of open-cast working in respect of which it shall
suffice if the plans are maintained up-to-date within a period of twelve months:[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 219
Provided that where any mine or part or section is proposed to be abandoned, closed or the
working thereof to be ceased or rendered inaccessible, the plan and section shall be brought up-to-date
before such abandonment, closure or at the time of cessation, as the case may be, unless such
abandonment, closure or cessation has been caused by circumstances beyond the control of the owner,
agent or manager, in which case the fact that the plan or section is not up-to-date shall be recorded on
it.
(5) All the reference stations at surface and the reference points of underground surveys shall be
shown in their correct position relative to the Survey of India national grid within the limits of error of
survey and plotting, as specified under sub-regulation (3).
(6) Plans, sections and digital data required to be maintained under these regulations shall be kept
available for inspection in the office at the mine, and shall not be removed therefrom except by or with
the approval of the Regional Inspector-cum-Facilitator, unless a true copy thereof has been kept therein.
(7) The Chief Inspector-cum-Facilitator may, subject to the conditions as may be specified in the
order, permit preparation of plans or sections in variance with the provisions of this regulation.
57. Type of plans and sections. – (1) The owner, agent or manager of every mine shall keep the
following plans and sections: -
(a) a surface plan showing permanent bench mark or tri-junction or revenue pillars, every
surface feature within the boundaries and up to 50 meters outside the boundary, such as
telephone, power transmission line, water main, tram-line, railway, road, river, watercourse,
reservoir, tank, bore-hole, shaft and incline opening, opencast working, subsidence and
building on the surface;
(b) an underground plan showing -
(i) the position of the working of the mine belowground;
(ii) every bore-hole and shaft with depth, incline opening, drive, cross cut, winze, raise,
excavation (stope areas), fire-stopping or seal, water dam (with dimensions and
other particulars of construction), refuge chamber, pumping station, haulage
roadway and every tunnel and air passage connected therewith;
(iii) every pillar or block of mineral left for the support of any structure on the surface;
and underground magazines, if any;
(iv) every important surface feature within the boundaries, such as railway, road, river,
stream, watercourse, tank, reservoir, opencast working and building which is within
50 meters of any part of the working measured on the horizontal plane;
(v) the general strike of the veins, lodes, reefs and mineral beds or deposits;
(vi) such sections of the veins, lodes, reefs and mineral beds or deposits as may be
necessary to show any substantial variation in the thickness or character thereof and220 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
showing the working section, and such sections of the strata sunk or driven through
in the mine or proved by boring as may be available;
(vii) the position of every washout, dyke, fault and other geological disturbance with the
amount and direction of its throw and the hade;
(viii) an abstract of all statutory restrictions in respect of any specified working with
reference to the order imposing the same.
Whenever this plan is brought up-to-date, the then, position of the working shall be shown by dotted
line drawn through the ends of the working and such dotted line shall be marked with the date of the
last survey:
Provided that the Chief Inspector-cum-Facilitator may, be an order in writing and subject to such
conditions as may be specified therein, approve any other method of showing the up-to-date position of
the working of the mine.
(c) a transverse section or sections of the working through the shaft or shafts and main adits
indicating clearly the surface and the dips of the vein, lode, reef or mineral bed or deposit
at different points; and such sections of the strata sunk or driven through in the mine or
proved by boring, as may be available.
(d) a vertical mine section or sections showing a vertical projection of the mine working, where
a reef, vein, lode or mineral bed or deposit has an average dip of more than 30 degrees
from the horizontal:
Provided that in case of a mine having opencast workings, vertical mine sections showing vertical
projections of mine workings at suitable intervals not exceeding 100 meters, in both, longitudinal as well
as transverse directions, shall be prepared and maintained irrespective of the dips of the vein, lode, reef
or mineral bed or deposit:
Provided further that, with the permission of the Regional Inspector-cum-Facilitator and subject to
such conditions as may be specified therein, such sections may be prepared in relation to any other
suitable plane;
(e) a ventilation plan, and section where necessary, showing the system of ventilation in the
mine, and in particular –
(i) the general direction of air-current;
(ii) every point where the quantity of air is measured;
(iii) every air-crossing, ventilation door, stopping and every other ventilation device for
the regulation and distribution of air;
(iv) every fire-refuge chamber, if provided;
(v) every fire-stopping and its serial number.
(vi) every room used for storing inflammable material;
(vii) the position of firefighting equipment;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 221
(viii) every water-dam with dimensions and other particulars of construction;
(ix) every sump, pumping, telephone and ambulance station, every underground
magazine; and
(x) every haulage and travelling roadway;
(xi) every auxiliary or booster fan;
(f) a joint survey plan showing the details required under clauses (a) and (b) of this sub-
regulation, and sub-regulations (6) and (7), signed by the surveyor and the manager of the
mine and also of adjoining mines having working within 60 meters of the common
boundary or where the boundary is in dispute, within 60 meters of the boundary claimed by
the owner of the mine concerned signifying the correctness of the common boundary, or
the disputed boundaries, as the case may be, and of the position of the working in relation
to one another;
(g) a geological plan and section of the area of leasehold, on a suitable scale;
(h) a water-danger plan and section showing-
(i) nullah, river, lake, water pond, water coarse, drainage or any other water bodies on
surface or belowground existing upto 200 meters of the boundary of the mine;
(ii) the position of the working belowground and every borehole and shaft (with depth),
drive, crosscut, winze, rise, staple pit, excavation and air passage connected
therewith;
(iii) the position of every dyke, fault and other geological disturbance with the amount
and direction of its throw as well as hade;
(iv) levels taken in workings belowground at easily identifiable points sufficient in number
to allow the construction of sections along all drives, main headings and haulage
roadways;
(v) every source of water such as river, stream, water-course, reservoir, water-logged
opencast working on the surface, and also the outline of all water-logged working
belowground lying within 60 meters of any part of the working measured in any
direction ;
(vi) every reservoir, dam or other structure, either above or belowground, constructed to
withstand a pressure of water or to control inrush of water, along with reference to
its design and other details of construction; and
(viii) the highest flood level of the area.
(2) Where different reefs, lodes, veins or mineral beds or deposits overlie or run parallel to one
another, the working or each reef, lode, vein or mineral bed or deposit shall be shown on a separate
plan or longitudinal section or sections; so however that if two reefs, lodes, veins or mineral beds or
deposits are so situated in relation to each other than the parting between working made therein is less222 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
than ten meters at any place, such working shall also be shown on a combined plan or longitudinal
section, as the case may be in different colours.
(3) (a) (i) The Plans maintained under clauses (a), (b), (e) , (f), (g) and (h) of sub-regulation
(1) shall also show surface contour lines drawn at vertical intervals not exceeding five
meters (or ten meters in the case of a mine where there are no working
belowground; or in cases of mines situated in hilly terrain, such other interval as the
Regional Inspector-cum-Facilitator may permit by an order in writing and subject to
such conditions as may be specified) over the whole area lying within 50 meters of
any part of the working.
(ii) The plans required to be kept under clause (b) of sub-regulation (1) shall also show
the workings both above or belowground of all adjacent mines as are situated within
60 meters, measured on any plane, of the boundary claimed by the owners of the
mines. The position of these workings also shall be maintained up-to-date within
three months, or 12 months if permitted under sub-regulation (4) of regulation 56.
(iii) The plans kept under clause (b) of sub-regulation (1) shall also, on every occasion
that the workings are brought up-to-date in compliance with the provisions of clause
(ii) of this sub-regulation, be signed by the surveyor and the manager of every
adjoining mine having workings within 60 meters of the common boundary (or where
the boundary is in dispute, within 60 meters of the boundary claimed by the owner of
the mine) signifying the correctness of the common boundary, or the disputed
boundaries as the case may be, and of the position of the workings in relation to one
another.
(b) The owner, agent and manager of every mine shall give all reasonable facilities to the
surveyors of its adjacent mine to carry out the surveys and levellings required to be made
under this sub-regulation
(4) The plans maintained under clause (b) of sub-regulation (1) shall also show spot levels on the
floor of the working –
a) along haulage roadways, at every roadway junction, except in roadways where tramming is
done by manual means where the spot levels may be shown at points not more than 150 meters
apart; and
b) in the case of headings which have been discontinued either temporarily or permanently, also at
the end of such headings:
Provided that where two drifts in stone or two drivages in ore, pass over one another, these shall
be clearly indicated on the plans, with appropriate noting, if necessary.
(5) The plans maintained under clause (a) of sub-regulation (1) shall also show spot levels on the floor
of every bench of open cast working and haul roads at intervals not exceeding fifty meters.
(6) A permanent bench-mark shall be established on the surface, and all levels taken above and
belowground shall be referred to a plane in relation to such bench-mark and the particulars of the[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 223
bench-mark, together with its co-ordinates and height above Mean Sea Level or altitude, shall be shown
on the plans required to be maintained under these regulations.
(7) The plans maintained under clauses (a) and (b) of sub-regulation (1) shall also show the settled
boundary of the mine, or where the boundary is in dispute, the boundaries claimed by the owner of the
mine and by the owners of the mines adjacent to the disputed boundary:
Provided that where it is not possible to show the complete boundary of leasehold on the same
plan, an additional key plan or any other suitable scale showing such boundaries with coordinates of the
boundary points and the outline of the working shall also be maintained.
(8) The plans maintained under clause (b) of sub-regulation (1) shall also show the working, and all
features as specified in that clause, both above and belowground of all adjacent mines as are situated
within 60 meters, measured on any plane, of the boundary claimed by the owners of the mines.
(9) The owner, agent and manager of every mine shall as soon as its working extend to within 60
meters of the settled boundary with an adjacent mine (or where the boundary is in dispute within 60
meters of the boundary claimed by the owner of the adjacent mine) inform the owner, agent or
manager of such mine of the fact of such extension and shall also give all reasonable facilities to the
surveyors of its adjacent mines to carry out the surveys and levellings required to be made under this
sub-regulation.
(10) The Regional Inspector-cum-Facilitator may, by an order in writing -
(i) require such additional details to be shown on the plans and sections maintained under
these regulations, or the preparation and maintenance of such other plans and sections
showing such details and on such scale and within such time as may be specified in the
order in writing; and
(ii) require the owner, agent or manager to submit to him or her within such time, such plans
and sections, or tracings thereof, as may be specified in the order.
(11) The owner, agent or manager shall, at any time if required by the Regional Inspector-cum-
Facilitator, show on any plan or section the then position of the working of the mine.
58. Plans and sections to be submitted before opening, abandonment, closure or cessation.
– (1) The owner, agent or manager shall submit a copy of the surface plan prepared under clause (a) of
sub-regulation (1) of regulation 57, also showing boundaries of the mine and shaft and openings of the
mine, tri-junction or revenue pillars to the Chief Inspector-cum-Facilitator and to the Regional Inspector-
cum-Facilitator within thirty days of commencement of the mining operation
(2) Where any mine, or part of a mine, is abandoned, closed or the working thereof has been ceased,
the owner of the mine at the time of abandonment, closure or cessation shall, within thirty days after
the abandonment or closure or within 90 days after the cessation of the working, as the case may be,
submit to the Chief Inspector-cum-Facilitator two true copies of the up-to-date plan and section of the
working of the mine or part maintained under clauses (a), (b), (c) , (f) and (h) of sub-regulation (1) of224 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
regulation 57 and every such copy shall show the bearing and distance of at least one of the shafts or
openings of the mine from a tri-junction or revenue pillar or from any other prominent and permanent
surface feature, the position of all water-dams built belowground (with their dimensions and other
particulars of construction) and also the spot levels at the ends of the working:
Provided that if a change of ownership occurs after the abandonment, closure or cessation and
before the expiry of thirty days of abandonment or closure or ninety days of the cessation of the
workings, as the case may be, such plans and sections shall be submitted forthwith.
(3) The original or a certified true copy of the plan and section submitted or uploaded under sub-
regulation (1) shall be kept in the office at the mine.
(4) The Chief Inspector-cum-Facilitator may, on such conditions as thinks fit to impose, and on payment
of the cost of preparing copies as determined, supply copies of a plan or section submitted under sub-
regulation (1) or such parts thereof as thinks fit -
a) to any person having a bonafide interest in the mine, the veins, lodes, reefs and mineral beds or
deposits or section;
b) to the owner, agent or manager of an adjacent mine.
59. Survey instruments, and materials. - (1) The owner or agent shall provide adequate number of
accurate and reliable survey instruments, equipment and materials for carrying out all survey and
levelling work and for the preparation of the plans and sections required under these regulations;
(2) The Survey Instruments so provided under sub-regulation (1) shall be checked, maintained and
calibrated at regular intervals to maintain their accuracy level.
60. List of plans, sections and instruments and their storage. - (1) All plans and sections, and
tracings or copies thereof, kept at the mine shall be serially numbered.
(2) Suitable arrangements shall be made at every mine for the proper storage and maintenance of
every plan and section and of all instruments and materials so as to provide for flat storage of every plan
and section maintained in physical form or secured in digital form under these regulations:
Provided that where special conditions exist, the Chief Inspector-cum-Facilitator may, by an order
in writing, permit storage and maintenance of plans and section in any other form subject to such
conditions as may be specified in the order.
(3) Every field book or electronic form and other notes used in the preparation of plans and sections
required under these regulations shall be duly indexed and kept in the office at the mine.
(4) A list of all plans and sections maintained under these regulations, or any orders made
thereunder, and tracings or copies thereof; of all survey instruments provided under regulation 59 with
their respective types specifications and identification numbers; and of all field books, reference of digital
data and other notes kept under sub-regulation (3) shall be kept in a bound paged book or digital form,
and updated whenever necessary.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 225
(5) Every entry in the book or electronic form maintained under sub-regulation (4) shall be signed or
e-signed and dated by the surveyor, and countersigned or e-signed and dated by the manager.
61. Preparation of plans by surveyors. – (1) Every plan and section, and tracing thereof, prepared
under these regulations shall be prepared by or under the personal supervision of the surveyor.
(2) Every plan or section, or any part thereof, prepared by or under the supervision of a surveyor shall
carry thereon a certificate by him or her to the effect that the plan or section or part thereof is correct;
and shall be signed or e-signed and dated by the surveyor and countersigned or e-signed and dated by
the manager on every occasion that the plan or section is brought up-to-date.
(3) Every tracing of a plan or section or of any part thereof shall bear a reference to the original plan or
section or and digital data from which it was copied and shall be certified thereon by the surveyor with
date, to be a true copy of the original plan or section. The certificate shall be signed and dated by him.
(4) If the surveyor fails or omits to show any part of the working or allows the plans or sections to be
inaccurate, he or she shall be guilty of a breach of these regulations:
Provided that nothing in this sub-regulation shall, exempt the owner, agent or manager of their
responsibility to ensure that every plan or section prepared, kept or submitted or uploaded under these
regulations or by any order made thereunder is correct and maintained up-to-date as required
thereunder.
62. Plans to be checked on change of ownership or on reopening, etc. - (1) When there is a
change in ownership of a mine, or where a mine or part thereof is reopened, or where in any mine or
part thereof it is intended to start any extraction or reduction of pillars or blocks of minerals, the owner,
agent and manager shall ensure that the plans and sections of the mine or part are accurate:
Provided that if any doubt arises as to the accuracy of the plans and sections in any respect, he or she
shall have accurate plans and sections prepared afresh before any drivage or other work of development
or stoping operations or of extraction or reduction of pillars or blocks of minerals is commenced.
(2) If the Chief Inspector-cum-Facilitator or Regional Inspector-cum-Facilitator is of the opinion that any
plan or section prepared, kept or submitted under these regulations is inaccurate, he or she may, by an
order in writing with reason, require a fresh survey made and a new plan or section prepared within
such time as may be specified therein.
(3) If the plan or section required to be prepared under sub-regulation (2) is not prepared within the
time specified in the order, or to the satisfaction of the Chief Inspector-cum-Facilitator or Regional
Inspector-cum-Facilitator, or the plan or section is not prepared or updated as required under these
regulations, he or she may get the plan or section prepared by any other agency; and the cost thereof,
as certified by the Chief Inspector-cum-Facilitator, shall be defrayed by the owner of the mine and be
recoverable from him or her as an arrear of land revenue.226 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER – VI
MEANS OF ACCESS AND EGRESS
63. Outlets from a mine. – (1) Except for the duration of shaft sinking or the drivage of other means
of access and egress from the mine together with the necessary development work, no person shall be
employed, or be permitted to enter or remain for purpose of employment, in any working belowground,
unless the working is provided with at least two shafts or inclines or declines or other outlets to surface:
a) with which every lode, reef, vein or mineral bed or deposit, or section thereof, for the time
being at work has a communication so as to afford separate means of ingress and egress to the
persons employed therein;
b) which do not have their surface openings in the same building; and
c) which are under the sole control of the manager :
Provided that the Chief Inspector-cum-Facilitator may, by an order in writing and subject to such
conditions as may be specified therein, permit the employment belowground of persons even in a case
where the two shafts, declines or outlets are not under the control of the same manager.
(2) The Chief Inspector-cum-Facilitator may, by an order in writing and subject to such conditions as
may be specified therein, permit the employment belowground of restricted number of persons even in a
case where places in the working of the mine do not contain two means of egress from each working
place.
(3) Suitable arrangements shall be made for persons to descend and ascend by each of such means
of access and egress; and -
(a) where the shaft is vertical and more than 60 meters in depth, such arrangements shall be
by mechanical means so installed and maintained as to be constantly available for use:
Provided that, if required by the Regional Inspector-cum-Facilitator by an order in writing, a
proper winding engine shall also be provided in a shaft more than 60 meters in depth even if it is not
vertical.
(b) where the incline or decline is more than one kilometer in length (one way) and the travel
by persons is arduous, a suitable man-riding system approved by the Chief Inspector-cum-
Facilitator shall be provided for persons to access and egress from the working of the mine:
Provided that in case of a doubt as to whether any such arrangement referred to in clause (a) or
clause (b) is suitable or not, it shall be referred to the Chief Inspector-cum-Facilitator for decision.
(4) Both the means of access and egress and the equipment used therein for the transport of
persons shall be kept constantly in a safe condition to facilitate ease of travelling, including clearances
for hand carried stretchers.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 227
(5) Where in any shaft, ladders are used as a means of ingress or egress of persons employed in a
mine, every such ladder shall confirm to the requirement as specified in regulation 69.
(6) Such shafts, declines or outlets shall not be less than 15 meters distance from one another at any
point, and each shall be connected with the other by means of a walkable passage, not less than 1.8
meters high and 1.5 meters wide, through the working belowground that are being served by such
shafts, declines or outlets:
(7) Whenever the connection between two outlets which are required to be maintained under sub-
regulation (1) has been obstructed or found dangerous, only such persons as are necessary to clear the
obstruction or to repair the dangerous part of the connection or to make a new second outlet, as the
case may be, shall be employed belowground until such time as the connection has been re-established
or a new second outlet has been provided.
(8) The foregoing provisions of this regulation with respect to shafts, declines and outlets shall not
apply-
a) to a shaft which is being sunk or to an outlet which is being made;
b) to any working for the purpose of making a connection between two or more shafts, declines or
outlets; and
c) to any working for the sole purpose of searching for or proving minerals: so long as not more
than 20 persons are employed belowground at any one time in the whole of the working
belowground in connection with a single shaft or outlet.
Provided that if the single outlet is an un-walkable shaft (other than a shaft in the course of being
sunk) and exceeds 30 meters in depth, it shall be provided both with ladders and with other means of
raising and lowering persons:
Provided further that nothing in this sub-regulation shall be deemed to authorise the driving of
roadways for the development purposes before a second outlet has been made in accordance with the
said provisions.
(9) In both the means of access and egress in the mine, an effective two way communication
facilities with broadcasting system of telecommunication shall be provided to ensure that persons from
belowground may be able to directly communicate to surface without any obstruction or loss of message
and communication link:
Provided that in case of a mine or part thereof to which regulation 153 applies, the system of
communication and telecommunication so provided shall be of wired, wireless or any other type, as
approved by the Chief Inspector-cum-Facilitator.
64. Working shafts and winzes. – (1) All entrances to the mine shaft shall be adequately illuminated
throughout working hours.228 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) Every shaft or winze in use or in course of being sunk and every decline or other outlet shall be
made and kept secure.
(3) Every shaft, and every winze or raise intended to be used for purposes of winding or haulage in the
course of being sunk shall be provided with a permanent lining, either of timber, metal, concrete or
masonry, which shall at no time, be more than six meters from the bottom of the shaft or winze:
Provided that where iron or steel rings with a substantial lagging are used below the permanent
lagging and are kept close to the bottom of the shaft, this distance may be increased to not more than
twenty meters:
Provided further that in the case of a shaft where special conditions exist which make compliance
with the provisions of this sub-regulation not necessary, the Regional Inspector-cum-Facilitator may, by
an order in writing and subject to such conditions as may be specified therein, grant exemption from the
operation thereof.
(4) Surface and seepage water shall be channeled in such a way as to prevent it from falling freely
into the shaft.
(5) The top, all insets and bottom of every working shaft and the sump thereof shall be kept clear
and free from loose materials, tools and debris.
65. Fencings and gates at outlets. - (1) Every entrance to a mine from the surface, and the top and
all entrances between the top and bottom, including the sump, if any, of every working, ventilating or
pumping shaft, shall be kept securely fenced so designed and constructed as to prevent any person
accidentally falling down the shaft or coming into contact with a moving part of the hoisting equipment
provided in the shaft.
(2) Every walkable entrance from the surface to the workings belowground shall be provided with a
substantial gate which shall be kept closed and locked when there are no persons belowground:
Provided that where such entrance is not used as a means of ingress or egress in or out of the
mine, it shall be permanently closed so as effectively to prevent persons from entering therein.
66. Outlets from mine parts. - Every part of a mine shall, where practicable, be provided with at
least two ways of affording means of egress to the surface:
Provided that if any doubt arises as to whether the provision of two such ways is practicable or not, it
shall be referred to the Chief Inspector-cum-Facilitator for decision which will be final and binding.
67. Periodic examination of shafts, decline and other outlets. - (1) Every shaft, decline and
other outlets provided as required by regulation 63 shall be examined, once at least in every seven days,
by a mining supervisor or other competent person and a report of every such examination shall[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 229
immediately thereafter be recorded in a bound paged book or electronic form kept for the purpose and
shall be signed or e-signed and dated by the person making the examination.
(2) Every mechanized outlet shall be examined at least once in every seven days by an engineer or
electrical supervisor or mining supervisor or any other competent person duly authorised in writing by
the manager and a report of every such examination shall immediately be recorded in a bound paged
book or electronic form kept for the purpose and signed or e-signed and dated by the person making the
examination.
(3) The bound paged book so maintained under sub-regulation (1) & (2) by the electrical supervisor or
mining supervisor or any other competent person shall also be checked and countersigned or e-signed
by the engineer and manager.
(4) If at the time of such examination or at any other time, the shaft, decline or other outlet is found to
be not safe, it shall not be used for any purpose, except as a natural airway, until it has been made safe
in all respects and a report of every such action taken shall be recorded in the book or in electronic form
kept under sub-regulation (1) & (2).
68. Provision of ladderways. - (1) Every shaft or winze and headgear, including shaft or winze in the
course of being sunk, which has an inclination exceeding 25 degrees from the horizontal, shall be
provided with a ladderway from the top to the bottom:
Provided that in the case of a shaft or winze in the course of being sunk, the ladderway may be
provided within such distance, not exceeding 20 meters, from the bottom as to secure it from danger
during blasting operations and a chain or rope ladder shall be provided from this point to the bottom of
the shaft or winze:
Provided further that where the Chief Inspector-cum-Facilitator is of the opinion that compliance
with the provisions of this sub-regulation is not reasonably practicable, he or she may, by an order in
writing and subject to such conditions as may be specified therein, grant an exemption therefrom.
(2) Every working place shall be provided with platforms or other means of keeping a foothold, and
where necessary, with ladders for climbing.
69. Ladders. - (1) Every ladder used in a mine shall –
(a) be of strong construction;
(b) subject to the provision of sub-regulation (2), be securely fixed in the shaft, winze or stope
and headgear at an inclination of not more than 80 degrees from the horizontal;
(c) be made continuous or without perceptible overlapping or break except at a platform or
sollar;
(d) project at least one meter above the mouth of the shaft, winze, rise or stopeand every
platform, except where strong holdfasts or hand-rails are provided;230 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(e) have rungs equally spaced and at a sufficient distance from the wall or from any timber to
ensure proper foothold; and
(f) be maintained in working condition.
(g) be properly guarded in case of headgear
(2) Except in respect of the lowest 10 meters of a sinking shaft or winze, no ladder shall be placed
at an inclination of more than 80 degrees from the horizontal:
Provided that the Regional Inspector-cum-Facilitator may, by an order in writing and subject to such
conditions as may be specified therein, permit a ladder to be fixed at a steeper inclination.
70. Provision of sollars, etc. – (1) If a ladderway provided under sub-regulation (1) of regulation 68
exceeds 20 meters in depth and has an inclination of more than 30 degrees with the horizontal,
platforms or sollars shall be provided at intervals of not more than 15 meters along the underlie or
slope of the shaft or winze.
(2) Where the inclination is more than 60 degrees from the horizontal, the platforms or sollars shall
be provided at intervals of not more than 10 meters.
(3) Platforms or sollars with guard shall be provided in headgear for inspection and maintenance
wherever required.
(4) If a manhole is provided at any platform in any shaft or winze, it shall be placed behind the ladder
leading up from the platform.
(5) Every opening in a platform provided for the handling of timber or other materials shall be effectively
closed from the rest of the platform.
71. Guarding of ladderways. - (1) Every ladderway in a shaft or winze used for winding or other
purposes shall be in a separate compartment or shall be adequately guarded from other compartments.
(2) Every ladderway below any place or travelling roadway where persons are stationed or pass, shall be
provided with a suitable cover or substantial fence or guard.
72. Carrying of materials on ladderways. - No person shall carry or be permitted to carry a drill,
tool, explosives or any loose material on a ladderway in a shaft or winze having an inclination of more
than 45 degrees from the horizontal except so far as may be necessary for carrying out repairs:
Provided that nothing in this regulation shall prevent a person from carrying a drill, tool or
explosives in a suitable sling or container secured to his or her person.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 231
CHAPTER- VII
WINDING IN SHAFTS
73. Appointment of winding engine operator. - (1) No person shall be appointed as a winding
engine operator unless person holds an Winding Engine Operator’s Certificate for the type of engine:
Provided that this sub-regulation shall not apply to the operator of an electrical winding engine
upto 30 HP or of a steam or compressed air winding engine which has cylinders not exceeding 18
centimeters in diameter and which is not used for raising or lowering of persons.
Provided further that, after coming into force of these regulations, a First or Second Class Engine
Driver’s Certificate granted under regulation 12 of the Metalliferous Mines Regulations, 1961, shall, each
be also deemed to have been granted as an Winding Engine Operator’s Certificate under regulation 4 of
these regulations.
(2) Where special difficulties exist which make compliance with the provisions of sub-regulation (1) not
reasonably practicable, the Chief Inspector-cum-Facilitator may, by an order in writing and subject to
such conditions as may be specified therein, relax the said provisions.
(3) No person, other than a winding engine operator appointed under sub-regulation (1) shall operate
any winding engine:
Provided that a duly appointed assistant working under direct personal supervision of the winding
engine operator may be allowed to operate any winding engine except for man winding purpose:
Provided further that in an emergency any other competent person may be permitted to operate
the winding engine.
(4) The name of the winding engine operator on duty, together with the period of his or her shift shall
be posted in the winding engine room:
Provided that where the Regional Inspector-cum-Facilitator is of the opinion that the duties of
any winding engine operator are unduly arduous, he or she may by an order in writing require the
period of his or her shift to be reduced to such period, not less than five hours, as may be specified.
74. New winding installations. - (1) When it is intended to bring into use any new winding
installation for lowering and raising of persons, the owner, agent or manager shall, not less than 30 days
before such use, give notice of such intention to the Chief Inspector-cum-Facilitator and Regional
Inspector-cum-Facilitator in such form as may be, specified by the Chief Inspector-cum-Facilitator, from
time to time by general or special order which shall contain detailed specifications of the installation.
(2) A winding engine which is shifted from one site to the other within the same mine or from one
mine to other, shall be considered as a new installation for the purpose of this regulation.
(3) If the Chief Inspector-cum-Facilitator, by an order in writing, so requires, such additions or
alterations shall be made to the installation, as may be specified in the order.232 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
75. Construction and installation of winding equipment. – (1) Every part of a winding
installation, including headgear shall be of sound construction and adequate strength, and shall be
maintained in safe working order and in case of any doubt in that respect, it shall be referred to the
Chief Inspector-cum-Facilitator for decision.
(2) (a) Every winding engine shall be housed in engine room white washed and having emergency
exit, adequate illumination, ventilation and ergonomically designed seat for winding engine
operator.
(b) The engine shall be firmly connected to a rigid foundation and shall be so designed,
constructed and maintained that with the power provided, the raising and lowering of
persons or materials can be carried out with ease, regularity and safety.
(c) There shall be provided and maintained an adequate access for examination of engine
foundation, brake assembly, etc.
(3) Unless otherwise permitted by the Chief Inspector-cum-Facilitator and subject to such conditions
as may be specified therein, every engine for winding shall be so situated in relation to the headgear
that the winding rope shall not, in the extreme position, subtend in either direction an uniform angle
more than one and a half degrees with the plane of the sheave or pulley used in connection with the
rope.
(4) The diameter of the drums or sheaves of the winding engine, and of the pulleys and sheaves used
in connection with the winding shall, unless otherwise permitted by the Chief Inspector-cum-Facilitator
and subject to such conditions as may be specified therein, be not less than 80 times the diameter of
the rope in the case of winding installations installed before 11th day of March, 1961 and not less than
100 times the diameter of the rope in other cases:
Provided that the Chief Inspector-cum-Facilitator may, by an order in writing, require that in the
case of any specified winding installation installed before the said date, the diameter of the said drums,
pulley or sheaves shall not be less than such size, as may be specified in the order.
Provided further that where special difficulties exist which make compliance with the provisions of
this regulation not reasonably practicable, the Chief Inspector-cum-Facilitator may, by an order in writing
and subject to such conditions as may be specified therein, relax the said provisions.
(5) The grooves of sheaves or pulleys used in winding installation shall be suited to the diameter of
the rope.
(6) Every pulley or sheave used in connection with winding shall, while in motion, rotate in a vertical
plane, and shall be maintained in such a condition that slipping is reduced to a minimum.
76. Fittings of winding engines. – (1) At every shaft, including a shaft in the course of being sunk,
where winding is effected by means of an engine, the provisions of sub-regulation (2) to sub-regulation
(10) regarding winding engines shall apply.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 233
(2) There shall be on the drum such flanges, and also if the drum is conical or spiral such other
appliances, as will be sufficient to prevent the rope from slipping or coiling unevenly.
(3) Except in friction winder, the end of the rope shall be securely fixed in such a manner that the rope
is not unduly strained.
(4) There shall be at least two turns of the rope on the drum when the cage or other means of
conveyance is at its lowest working point in the shaft or winze.
(5) (a) There shall be provided more than one independent brakes on the drum or the drum-shaft,
which-
(i) if there are two cages or other means of conveyance shall independently hold such
cages or other means of conveyance when the maximum torque is applied in either
direction; and
(ii) if there is only one cage or other means of conveyance shall independently hold the
loaded cage or other means of conveyance in mid-shaft when the maximum torque is
applied downwards:
(b) At least one of the brakes shall be so designed that the brake remains at the ‘on’ position
except when operated.
(c) Where the brake or brakes are power-operated, at least one of them shall be arranged to
be applied automatically at all times if the power supply fails.
(d) The brake on the drum shall be used only for the purpose of keeping such drum stationary
and not for lowering the cage or other means of conveyance, except in cases where the
engine is to be worked at a very low speed as when examining the winding rope or the
shaft or winze.
(6) Where the winding engine is worked by steam or compressed air, a screw stop-valve shall not be
used as controlling valve of the engine.
(7) Every engine shall be equipped with a reliable depth-indicator (in addition to any mark on the rope)
showing to the winding engine operator the position of the cage or other means of conveyance in the
shaft or winze, and an automatic device that will ring a bell in the engine room when the ascending cage
or other means of conveyance is at a distance of not less than two revolutions of the drum from the top
of the shaft or winze.
(8) The depth-indicator referred to in sub-regulation (7) shall be tested after every adjustment or
replacement of the winding rope.
(9) Except in friction winders, a suitable automatic Slack Rope Protection device shall be installed.
(10) A “Dead man switch” shall be provided in the Winding Engine.234 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
77. Shaft fittings. - (1) At every winding shaft, other than a shaft in the course of being sunk to which
the provisions of regulation 81 shall apply, the provisions of sub-regulation (2) to sub-regulation (11)
shall have effect.
(2) (a) two independent and efficient means shall be provided and maintained for interchanging
separate, distinct and definite signals between the top of the shaft or winze and –
(i) the bottom or other permanent landing of the shaft or winze; and
(ii) every inset for the time being in use, and one of such system shall be by electrical
means;
(b) there shall also be provided and maintained in working condition for transmitting signals
from the top of the shaft to the winding engine operator and all signals shall be transmitted
by mechanical or electrical means.
(3) In signaling, the following code of signals shall be used and strictly observed:
ONE RAP : STOP when engine in motion
TWO RAPS : LOWER when engine at rest
THREE RAPS : RAISE
FOUR RAPS : MEN ready to ascend or descend
FOUR RAPS IN REPLY: men may enter the cage or other means of conveyance:
Provided that any other signals shall be in addition to, and shall not interfere with, the foregoing:
Provided further that the Chief Inspector-cum-Facilitator may, by an order in writing and subject
to such conditions as may be specified therein, permit the use of any code of signaling other than that
specified above.
(4) A printed copy of the code of signals, including additional signals, if any, shall be posted prominently
at the top of the shaft or winze and at every such inset and landing and also in the winding engine
room.
(5) No person other than the pit top attendant, bellman or signalman shall give any signal unless person
is an official of the mine or is authorised in writing by the manager to give signals.
(6) Any defect in the signaling system shall be immediately reported to an official who shall take
action to have the defects rectified.
(7) In addition to the system of signaling provided in this regulation, another effective means of two
way communication or telecommunication system shall also be provided so that the winding engine
operator, pit top attendant, bellman or signalman, persons travelling inside the cage or any other person
can contact and communicate with each other without any difficulties and hindrance.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 235
(8) (a) Where the shaft or winze is vertical and exceeds 45 meters in depth, it shall be provided
with sufficient number of guides to ensure smooth and safe travel of the cage or other
means of conveyance:
Provided that in case of man-winding sufficient number of guides shall be provided to ensure smooth
and safe travel of the cage or other means of conveyance, irrespective of depth.
(b) Where rope guides are used, the cheese-weights or bottom clamps shall be kept so
exposed as to permit regular examination.
(9) Above the topmost landing, ‘dogs’ or other devices for holding the cage or other means of
conveyance in the event of an overwind shall be provided, or the guides, runners or receivers shall be
sprung.
(10) (a) Except in friction winders, at the top of every shaft where cages are used, suitable keps
shall be provided and so arranged as to fall into the ‘on’ position when the operating lever
is released;
(b) At every inset where keps or folding platforms are provided, arrangements shall be made to
lock the keps or platforms securely in the ‘off’ position; and when in the ‘off’ position such
keps or platforms shall leave the shaft clear for the passage of the cage; and
(c) In every such case, a proper automatic indicator to show the position of the keps or
platforms, as the case may be, shall be provided in such a position as to be easily seen by
the pit top attendant.
(11) (a) Protective roofing, sufficient to prevent danger from anything falling in the shaft, shall be
provided and maintained at every inset, if any, and at the bottom of the shaft; and
(b) The gap, both vertical and horizontal, between the protective roofing and the top of cage,
when the cage is at all the insets and at the bottom of the shaft, shall not exceed 15
centimeters.
78. Man winding. - (1) At every shaft or winze, other than a shaft or winze in the course of being
sunk, where a winding engine is used for the purpose of lowering or raising persons, the provisions of
sub-regulation (2) to sub-regulation (18) shall apply.
(2) In respect of every part of the winding installation, including pulleys or sheaves, cages, chains,
distribution plates and detaching hooks, the following particulars shall be recorded in a bound paged
book kept for the purpose or in retrievable and non-editable electronic form, namely:–
(a) name of the manufacturer and the year of manufacture;
(b) specifications and dimensions;
(c) reference to every certificate supplied with the part;
(d) date of installation of each part; and236 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(e) any other detail that may be necessary or required by the Regional Inspector-cum-
Facilitator.
(3) All entries in the book or in electronic form shall be made and signed or e-signed by the engineer
or other competent person, and shall be countersigned or e-signed and dated by the manager.
(4) Whenever any part or article is replaced or any repaired part or article is used in any winding
installation, the fact of such replacement or repair shall be recorded in the book or in electronic form
kept under sub-regulation (2).
(5) (a) A single linked chain shall not be used, except for the short coupling chain attached to a
cage or other means of conveyance and such single linked chain shall be attached to the
safety hook through a distribution plate or other approved appliance; and
(b) where safety-chains are used, their length shall be such that if the king-bolt breaks, the
shock to the cage or other means of conveyance is as minimum as possible.
(6) Where drum-clutches are provided, the following provisions shall have effect, namely:–
(a) the operating gear of the clutch of the drum shall be provided with locking gear to prevent
inadvertent withdrawal of the clutch;
(b) every engine used for the lowering or raising of persons shall have a suitable interlocking
device so fitted that it is not possible-
(i) to unclutch any drum unless the brakes of such drum are applied; or
(ii) to release the brakes until the drum clutch is fully engaged and securely locked;
(c) unless the cage or other means of conveyance attached to the drum is resting at the
bottom of the shaft or winze, the drum shall not be unclutched unless the winding engine
operator has assured himself or herself immediately beforehand that the brake is fully
applied.
(7) Except in friction winders, there shall be provided between the rope and the cage or other means
of conveyance, a detaching hook.
(8) The space between such detaching hook, measured from the centre of the hole for attaching it to
the rope shackle, and the detaching-bell or plate when the cage or other means of conveyance is at its
normal position at the top of the shaft, shall be not less than 3.6 meters where a geared engine is used,
and not less than 7.5 meters where a direct acting engine is used.
(9) If the shaft or winze exceeds 300 meters in depth, there shall be a clear over-run space of not
less than 7.5 meters below the lowest landing place. The sump below the lowest landing place shall be
kept free from water or other liquid matter to such an extent that in case of an overwind, the persons
riding in the case or other means of conveyance will not be submerged.
(10) In every shaft, the engine shall be fitted with an automatically recording speed indicator.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 237
(11) (a) In every shaft, there shall be provided an effective automatic contrivance to prevent over
speeding and over winding, hereinafter called the ‘Automatic Contrivance’ which shall
prevent the descending cage from being landed at the bottom of the shaft or winze or other
permanent landing at a speed exceeding 1.5 meters per second and also control the
movement of the ascending cage in such a manner as to prevent danger to persons riding
therein;
(b) The Chief Inspector-cum-Facilitator may, by an order in writing, specify the maximum
speed of winding in any shaft or winze;
(c) Tests of every Automatic Contrivance and every brake shall be made by the engineer or
other competent persons appointed for the purpose, in the following manner, namely:-
(i) once at least in every seven days, by raising each cage or other means of
conveyance, in turn, to pass the last control point above the topmost landing;
(ii) once at least in every three months, by attempting to land the descending cage at
excessive speed and for the purpose of this test, the setting of the Automatic
Contrivance may be altered so that pre-determined point in the shaft is regarded as
the landing; and
(iii) the results of every such tests shall be recorded in a bound paged book kept for the
purpose or in retrievable and non-editable electronic form, and shall be signed or e-
signed and dated by the person making the test.
(d) Unless the Automatic Contrivance is in full and fixed engagement with the winding engine,
it shall be fully engaged, either automatically or by the winding engine operator, whenever
persons are to be lowered or raised; and an automatic indicator to show that this has been
done shall be provided in such a position as to be easily seen by the pit top attendant;
(e) The pit top attendant shall not allow any person to enter a cage or other means of
conveyance until the indicator shows that the automatic Contrivance has been fully
engaged.
(12) In addition to the Automatic Contrivance provided to prevent overwinding, a point shall be fixed
and marked on the indicator of the engine in such a way as to show when the cage or other means of
conveyance is at a distance of not less than twice the circumference of the drum from the completion of
the wind; and if such cage or other means of conveyance contains persons, the winding engine operator
shall not, as soon as it has reached the point aforesaid, raise it for the remaining distance at a speed
exceeding 1.2 meters per second.
(13) Where the only means of egress in a mine is by apparatus worked by steam or electricity,
precautions shall be taken to ensure that the two winding engines do not fail simultaneously and in
particular, in the case of electric winding engines, the engines shall be capable of being connected to
two independent source of power supplies.238 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(14) Unless otherwise directed by the Chief Inspector-cum-Facilitator by an order in writing, the
provisions of the sub-regulation (13) shall be deemed to have been complied if an emergency winding
gear is maintained.
(15) (a) Every cage or other means of conveyance in which persons ride, shall be –
(i) covered completely at the top;
(ii) closed in at the two sides in a manner sufficient to prevent persons or things from
projecting beyond the sides;
(iii) provided with a rigid hand-bar fixed in a position where it can be easily reached by all
persons in the cage or other means of conveyance;
(iv) provided with suitable gates or other rigid fences such that the gap between the floor
of cage or other means of conveyance and the lowest part of the gate or fence does
not exceed 15 centimeters and that between any two members of the gate or fence
does not exceed 25 centimeters. Gates or fences shall not open outwards and they
shall be so fitted and maintained that they cannot be accidentally opened; and
(v) provided with an effective means of communication or telecommunication system having
provisions of audio and visual, including broadcasting system for communication with
pit top attendant or engineman and bellman.
(b) The floor of every cage or other means of conveyance shall be strongly constructed and so
maintained as to prevent any part of the body of a person riding in the cage or other means
of conveyance from projecting beyond the floor;
(16) Not more than such number of persons as may be authorised by the manager shall be allowed to
ride in the same cage or same deck of a cage or other means of conveyance at one time providing
approximately 0.20 square meter of floor area per person and a notice specifying the number shall be
posted at the top and bottom of every shaft and at every inset.
(17) Unless permitted by the Chief Inspector-cum-Facilitator by an order in writing and subject to such
conditions as may be specified therein, total load when the authorised number of persons ride at any
one time in any cage or other means of conveyance shall not exceed 60 per cent of the maximum load,
when materials are wound.
(18) (a) No person shall, when ascending or descending a shaft, take with him or her any bulky
material other than tools and instruments, except when engaged in repairing the shaft or
with the written authority of the manager;
(b) Except as provided in clause (a), no person shall ride in a cage while materials or tubs are
being raised or lowered in any of the cages or other means of conveyance.
(19) Except in friction winders, an appropriate device shall be installed at Pit Bottom of a shaft to reduce
the impact of landing of the descending cage at time of hard landing and to ensure safety of persons
travelling by the cage.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 239
Provided that the Chief Inspector-cum-Facilitator may, subject to such conditions as may be
specified, relax the requirements of any of these sub-regulation if the circumstances in any mine or part
thereof are such as to render compliance with such requirements not reasonably practicable.
79. Multi-decks. - Where a cage has two or more decks which are used simultaneously, each floor at a
landing shall be connected by an effective signaling device with the main floor of the landing; and only
the pit top attendant or the bellman or the signal man or an official, as the case may be, at such main
floor shall give the action signal after he or she has satisfied himself or herself that all cage gates are
closed.
80. Winding of material. - (1) Every cage used for the raising or lowering of tubs shall be provided
with catches or other effective contrivances to prevent the tubs falling out and the cage shall not be set
in motion unless the catches or other effective contrivances are in position.
(2) The floor of every cage shall be kept clean; and no skip, bucket or tub shall be filled up to such
height that any of the contents can fall out.
(3) Before long timber, pipes, rails or other material projecting over the top of the cage or other
means of conveyance are lowered or raised, the projecting ends shall be securely fastened to the rope,
chain or bow.
81. Winding in sinking shafts. - (1) At every shaft or winze in the course of being sunk, where a
winding engine is used, the provisions of sub-regulation (2) to sub-regulation (11) shall apply.
(2) If the shaft or winze is vertical and exceeds 45 meters in depth, there shall be provided for each
bucket or other means of conveyance a detaching-hook.
Provided that where special circumstances exist the Chief Inspector-cum-Facilitator may by an order in
writing and subject to such conditions as may be specified therein grant an exemption from the
provision of this clause.
(3) Between the centre of the hole for attaching the detaching-hook to the rope shackle and the
detaching bell or plate, when the bucket or other means of conveyance is at the top landing, there shall
be a clear over-run space of not less than 3.6 meters.
(4) Where the shaft exceeds 150 meters in depth –
(a) the bucket or other means of conveyance, when used for lowering or raising persons, shall
be provided with sufficient cover overhead for protection from things falling down the shaft;
and
(b) there shall be provided for each bucket or other means of conveyance, a sufficient number
of guides which shall be kept extended to within 22.5 meters of the shaft bottom at all
times when sinking is in progress:240 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Provided that the Regional Inspector-cum-Facilitator may, by an order in writing, require the
guides to be provided in a shaft less than 150 meters in depth or is not vertical.
(5) (a) There shall be provided and maintained-
(i) two separate means of interchanging distinct and definite signals between the
bottom and the top of the shaft or winze; and
(ii) efficient means for transmitting such signals from the top of the shaft or winze to the
winding engine operator.
(b) The signalling appliances shall be examined by a competent person once at least in every
twenty-four hours and the result of every such examination shall be recorded in a bound
paged book kept for the purpose or in retrievable and non-editable electronic form and shall
be signed or e-signed and dated by the person making the examination.
(c) Except with the permission in writing of the Chief Inspector-cum-Facilitator and subject to
such conditions as may be specified therein, the following code of signals shall be used and
observed in signaling, namely:-
ONE RAP : STOP
TWO RAPS : LOWER
THREE RAPS : Take up SLACK or RAISE
FOUR RAPS : Take up SLACK or RAISE when men are riding:
Provided that, any other signals shall be in addition to, and shall not interfere with, the foregoing:
Provided further that the Chief Inspector-cum-Facilitator may, by an order in writing and subject
to such conditions as may be specified therein, permit the use of any code of signaling other than that
specified above.
(d) A printed copy of the code of signals, including additional signals, if any, shall be posted
prominently at the top of the shaft and also in the winding engine room;
(e) Except while riding in a bucket or other means of conveyance, no person other than the
person authorised in writing by the manager, shall give any signal.
(6) Every bucket or other means of conveyance in which persons or materials are conveyed, shall be
of strong construction and so maintained as to prevent persons or materials from falling.
(7) (a) At the top of the shaft or at the landing where the bucket or other means of conveyance is
normally landed, suitable covering with door shall be provided:
Provided that, except as may be required for the passage of the bucket or other means of
conveyance, the covering and doors shall always be kept closed.
(b) Where the shaft or winze has an inclination of 35 degrees or more from the horizontal and
exceeds 45 meters in depth, measured along its plane, the persons working at the bottom[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 241
of the shaft or winze shall also be protected by an adequate protective covering, extending
over the whole area of the shaft or winze, which shall be provided with a door for the
passage of the bucket or other means of conveyance, and at all times when sinking is in
progress the cover or scaffold shall be kept lowered -
(i) if the shaft or winze is vertical, to not more than 22.5 meters from the bottom; and
(ii) in any other case, not more than 30 meters from the bottom:
Provided that where special circumstances exist, the Chief Inspector-cum-Facilitator may, by an
order in writing and subject to such conditions, as may be specified therein, grant an exemption from
the provisions of this clause.
(8) Not more than such number of persons as may be authorised by the manager shall be allowed to
ride in the bucket or other means conveyance at one time; and a notice specifying such number shall be
posted prominently at the top of the shaft.
(9) When tools, implements or other materials are lowered or raised, the pit top attendant, or an
authorised person, as the case may be, shall see that –
(i) the bucket is properly loaded;
(ii) materials are not loaded above the rim;
(ii) long timber, pipes, rails, tools or other material with ends projecting over the rim are
securely fastened to the rope, chains or bow; and
(iv) the bucket, before being sent away, is steadied, and the bottom and sides thereof are free
from adhering material.
(10) Where guides are provided, the bucket or other means of conveyance shall be raised slowly from
the bottom of the shaft, until the rider is picked up.
(11) While persons are at work on any scaffold or platform in the shaft or winze, the following
precautions shall be strictly observed, namely:-
(i) the scaffold or platform shall be secured to the sides of the shaft in order to prevent it from
swinging;
(ii) the opening for the passage of the bucket or other means of conveyance, shall be so
protected as effectively to prevent anything falling through it;
(iii) the scaffold or platform shall not be lowered or raised except under the order of the
authorised person or other competent person.
82. Winding ropes, etc. – (1) At every shaft or winze, where rope is used for winding purposes, the
provisions of sub-regulation (2) to sub-regulation (8) shall apply.242 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) (a) No rope, bar, link, chain or other attachment to a cage or other means of conveyance shall
be used unless it is of good quality and manufacture, is free from any visible defect and is
of adequate calculated strength.
Provided that the Chief Inspector-cum-Facilitator may, by an order in writing, prohibit the use of any
rope or type of rope, bar, link, chain or other attachment where, in his or her opinion, such use is
unsafe.
(b) The attachment between the rope and the cage or other means of conveyance shall be of
such type and maintained in such manner as to obviate accidental disconnection.
(c) In case of a doubt, as to the fitness of any rope, bar, link, chain or other attachment used
or intended for use, it shall be referred to the Chief Inspector-cum-Facilitator for decision.
(3) (a) Except in a sinking shaft or winze less than 30 meters in depth, every winding rope shall be
made of cold drawn steel wire, and the gauge of the wires used in the construction of such
rope shall be suited to the diameter of the drums, pulleys and sheaves of the winding
installation.
(b) In any shaft or winze, including a shaft or winze in course of being sunk, where persons are
lowered or raised and where guides are not provided, no rope other than a rope of non-
spinning type shall be used.
(c) No rope which has been spliced shall be used for winding purposes.
(d) No winding rope shall be used or continue to be used, if its safety factor (i.e. the ratio
between breaking load on the rope at any point and the maximum static load on it when
the cage or other means of conveyance is at the lowest working point) is or becomes less
than 10 or any other value as notified by the Chief Inspector-cum-Facilitator by an order in
writing and subject to such conditions as may be specified therein.
(e) At every mine where a shaft or winze or incline is used for lowering or raising persons, at
least one spare winding rope suitable for use in such shaft, shall be kept in store.
(4) (a) For every rope in use or intended for use, a certificate showing its breaking load, quality,
construction and diameter (obtained from the manufacturer or supplier) and a history of its
use, including a record of diameters of the drums, sheaves and pulleys used in conjunction
with the rope, shall be kept in a bound paged book kept for the purpose or in retrievable
and non-editable electronic form;
(b) All entries made in the book referred to in clause (a) or electronic form shall be signed or e-
signed by the engineer or other competent person, and shall be countersigned or e-signed
and dated by the manager;
(c) If in the case of a rope a test certificate as to the amount of its breaking load is not
available, it shall not be used unless a portion thereof, not less than three meters in length,[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 243
has been cut off from the end of the rope attached to the cappel and tested in a laboratory,
institution or test house approved by the Central Government for the purpose.
(5) (a) No winding rope which has been in use, for more than two years in case of friction or koepe
winders and three and a half years in case of other winder, shall be used for winding
purposes:
Provided that where the Regional Inspector-cum-Facilitator is satisfied that due to sparing use any
such rope is in good condition even after the expiry of the said period, he or she may, by an order in
writing and subject to such conditions as may be specified therein, allow the use of such rope for a
longer period;
(b) Every application for permission to use a rope after the period of two years or three and a
half years aforesaid shall be accompanied by a copy of the entries, in respect of the rope, in
the book kept for the purpose or in retrievable and non-editable electronic form under sub-
regulation (4), and also by a certificate as to the strength of the rope;
(c) The certificate referred to in clause (b) shall relate to a piece of a rope cut off not more
than three months prior to the date of the application;
(d) If the Regional Inspector-cum-Facilitator is of the opinion that any rope has become unsafe
for use in a shaft before the expiry of the period of two years or three and a half years
aforesaid, he or she may, by an order in writing, prohibit the use of such rope for winding
purposes. An appeal against any such order may be preferred to the Chief Inspector-cum-
Facilitator.
(6) (a) No mode or type of capping shall be used, which fails to withstand a load of at least 10
times the maximum static load thereon;
(b) The cappel of a round rope shall not be attached to the rope by rivets passing through the
rope;
(c) No bent back wire type cappel shall be used with winding rope;
(d) Where white metal is used in the capping of ropes, the white metal socket shall withstand
the breaking strength of the rope and the tapered portion of the socket shall not be less
than six times and not greater than eight timesthe diameter of the rope and the angle of
taper is between 3 degrees and 6 degrees.
(e) If white metal is used in the capping of ropes, -
(i) its melting point shall not exceed 300 degrees centigrade, and its temperature when
poured into the socket shall not exceed 363 degrees centigrade;
(ii) in the length of rope which is to lie within the tapered part of the socket, the fiber
core, if any, shall be cut and the wires shall be untwisted and thoroughly cleaned;
and244 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iii) the socket shall be heated to a temperature of about 100 degrees centigrade before
the white metal is poured into it.
(7) Except in friction winder,-
(a) every rope shall be recapped once at least in every six months, or if necessary, at shorter
intervals and also after every over wind; and
(b) before every recapping, a length, including the capping, of at least two meters shall be cut
off the rope and every piece of rope so cut-off shall be opened and its internal condition
examined.
(8) The recapping of rope shall be carried out under the supervision of the engineer or other competent
person, who shall record the date and other particulars thereof (including the length of the rope
remaining after recapping) in a bound paged book kept for the purpose or in retrievable and non-
editable electronic form and shall sign or e-sign and date the same.
83. Suspension gear. - (1) All parts of the suspension gears shall be of a type as approved by the
Chief Inspector-cum-Facilitator.
(2) All parts of suspension gear in regular use shall unless otherwise permitted by the Chief Inspector-
cum-Facilitator, be renewed after a period of service of not more than six years, and at shorter intervals
for reasons to be mentioned, if necessary.
(3) The factor of safety shall not be less than 10 for components of suspension gears and threaded
joints shall be avoided:
Provided that wherever it is not practicable to avoid a threaded joint, a factor of safety not less
than 15 shall be ensured.
Provided further that in case of single point suspension gear, draw bar shall have not less than
two additional safety chains and factor of safety shall not be less than 10 for each component.
(4) (a) All cage chains in general use and all other parts of suspension gear between the rope
and the cage or other means of conveyance, including the detaching-hook, shall be taken apart,
cleaned and carefully examined as to wear and tear (where necessary by gauging) and for rust
and cracks, once at least in every six months, or if necessary, at shorter intervals; and various
parts shall be annealed or given other proper heat treatment, in a proper furnace where the
temperature could be controlled, before being refitted:
Provided that in the case of such chains or gear manufactured from a steel which is not liable to
deterioration necessitating annealing or heat treatment, the Chief Inspector-cum-Facilitator may by an
order in writing and subject to such conditions as may be specified therein, grant exemption from the
carrying out of this operation:
Provided further that detaching hooks used in sinking shafts shall be taken apart, cleaned and
carefully examined once at least in every week and the shear pin replaced by a new one every time such
examination is carried out.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 245
(b) Every detaching bell or plate used in connection with a safety-hook shall be examined, and
the opening therein checked by calipers or gauges, once at least in every thirty days.
(c) The operations and examinations required under this sub-regulation shall be carried out by
or under the supervision of the engineer or other competent person, who shall record the
date and other particulars thereof in a bound paged book kept for the purpose or in
retrievable and non-editable electronic form, and shall sign or e-sign and date the same.
84. Precautions after recapping, etc. - (1) After every installation or recapping of a rope and every
renewal or refitting of any suspension gear, the engineer or other competent person shall, after the
cages or other means of conveyance fully loaded with materials have made five trips up and down the
working portion of the shaft, examine the cappel and other parts of the suspension gear to see that they
are in proper working order.
(2) A report of every examination made under sub-regulation (1) shall be recorded in the bound paged
book kept for the purpose or in retrievable and non-editable electronic form, and shall be signed or e-
signed and dated by the person making the examination.
85. Examination of winding equipment. - (1) It shall be the duty of the engineer or other
competent person to examine –
(a) once at least in every twenty- four hours, –
(i) the attachment of the winding rope to the drum, the depth indicator, every part of the
suspension gear in the shaft, including cages or other means of conveyance and their gates, and
every external part of the winding apparatus, upon the proper working of which the safety of
persons depends; and
(ii) the brakes of the winding engines;
(b) once at least in every seven days, –
(i) each winding rope, by passing the rope at a speed not exceeding one meter per
second;
(ii) the external parts of the winding engine, the guides and the signaling arrangements
fitted in a shaft; and
(iii) shaft fittings including buntons, guide rail, guide rope, gap between cage guide shoe
& guide rail and joint bolt torque;
(c) once at least in every thirty days,-
(i) every winding rope, by passing the rope at a speed not exceeding 0.5 meter per
second, and for the purpose of this examination, the rope shall be cleaned of any
encrusted dirt and grease at all places particularly liable to deterioration and at other246 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
places, not more than thirty meters apart throughout the length; and any reduction
in the circumference of the rope and the superficial condition of the wires as to wear,
corrosion, brittleness and fracture at every such place shall be noted; and
(ii) general condition of the sheave, spokes, axle and bearings etc of Sheave;
(d) once in at least every six months,-
(i) groove and the thickness of material on tread of Sheave or Pulleys shall be checked
by suitable plaster mould and compared with the drawing of plaster mould made
when the sheave was newly installed and
(ii) Non-destructive testing shall be carried out for winding ropes, vital components of
machinery, such as drum shafts, brake tie rods and suspension gears etc;, at
intervals as may be specified by the Chief Inspector-cum-Facilitator, from time to
time by general order and any harmful crack or flaw detected as a result of such
tests shall be immediately reported to the Regional Inspector-cum-Facilitator and use
of such machinery or its components shall be discontinued forthwith.
(e) once at least in every twelve months, the winding engine as to the condition of its internal
parts.
(2) The Owner, Agent, Manager, Engineer shall ensure that,
(i) structural audit of head gear is carried out once in five year by an organization accredited
by National accreditation Board for testing and calibration laboratories (NABL)or approved
by the Government and
(ii) condition based monitoring (CBM) system is established and maintained for ascertaining
the health of Winding installation.
(3) A report of every such examination under sub-regulation (1) shall be recorded in a bound paged
book kept for the purpose or in retrievable and non-editable electronic form, and shall be signed or e-
signed and dated by the person who made the examination and countersigned or e-signed and dated by
the engineer.
(4) If on any examination made under sub-regulation (1) and (2), there is discovered any weakness
or defect by which the safety of persons may be endangered, such weakness or defect shall be
immediately reported in writing to the engineer or other competent person and to the manager and the
winding installation shall not be used until such weakness or defect is remedied.
86. Gates and fences. – (1) At the top of every shaft or winze and at every inset which is in use, there
shall be provided suitable gates or fences which shall effectively close the openings into the shaft or
winze at all times when a cage or other means of conveyance is not at the top or the inset. Every such
gate at the top of a shaft or winze shall be self-operating and interlocked with operation of winding
engine.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 247
(2) (a) At every landing where it is necessary for persons to pass from one side of the shaft to the
other, an adequate bypass shall be provided for enabling them to do so without entering or
crossing the shaft and every bypass so provided shall be not less than 1.8 meters high and
1.2 meters wide, which shall be kept clear of all obstructions.
(b) No person shall enter or cross, or be permitted to enter or cross the exposed space at the
bottom of any working shaft except for the purpose of entering or leaving a cage or other
means of conveyance or for undertaking an examination, repair or any other work therein;
and no person shall be allowed to work in any such space unless the cages or other means
of conveyance, if any, have been stopped and adequate precautions have been taken for
the protection of such person.
87. Duties of persons riding or working in shafts. - (1) No person shall get on or off a cage or
other means of conveyance after the same has been signalled to be set in motion or leave it until it has
reached the appointed stopping place; nor shall any person ride on the top or edge of any cage or other
means of conveyance except when engaged in an examination, repair or any other work in the shaft.
(2) Every person, when at or about the top or bottom of a shaft or any inset, shall obey the lawful
orders and directions of the pit top attendant or bellman, as the case may be.
(3) (a) No person shall carry out any examination, repair or other work in any shaft while winding
operations are being carried on; and no winding shall be carried on or permitted while
persons are engaged in such examination, repair or work, except where winding is
necessary for the same;
(b) The person in immediate charge of any examination, repair or work in any shaft shall warn
the pit top attendant or bellman and the winding engine operator that such examination,
repair or work is about to be undertaken;
(c) Every person while engaged in any examination, repair or other work in a shaft shall be
accompanied by at least one other person; and all such persons shall be provided with
safety belts of a type approved by Chief Inspector-cum-Facilitator and effectively protected
against the risk of falling;
(d) Every person engaged in carrying out an examination, repair or other work in a shaft shall
be protected by a suitable covering from objects falling from above and every such person
shall also be provided with a protective hat; and shall wear the same when so engaged.
88. General Precautions. - (1) No un-authorised person shall enter or be allowed, in a winding engine
room.
(2) No adolescent shall descend or ascend a shaft in a cage or other means of conveyance unless
accompanied by one or more adult males.248 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER- VIII
HAULAGE
89. Haulage roadways. - (1) The provisions of sub-regulation (2) to sub-regulation (20) shall apply
with respect to every length of road or roadway in a mine where materials are transported in tubs by
means of gravity or mechanical power.
(2) Every such roadway shall-
(a) be of adequate dimensions and, as far as practicable, shall be straight and of regular
gradient; and
(b) have tracks properly laid with rails of adequate section.
(3) (a) Pulleys, sheaves and rollers that guide and or alter the direction of a rope shall be securely
fixed;
(b) No person shall guide or adjust a moving rope on to a drum, pulley, sheave or roller except
with a lever or other proper appliance.
(4) Where haulage is effected by one or more ropes, there shall be provided and maintained-
(a) at the top of every inclined plane, at least one stop-block or other effective contrivance to
arrest tubs from running or moving out of control; and
(b) at least one run away switch or other effective contrivance below the first stop-block or
other effective contrivance at a distance greater than the length of a set or train of tubs:
Provided that such distance shall not exceed the length of a set or train of tubs by more than 10
meters:
Provided further that where the Regional Inspector-cum-Facilitator, by an order in writing, so
requires, the stop-block and the runaway switch or other effective contrivance aforesaid shall be so
inter-coupled that they do not remain simultaneously ineffective;
(c) an attachment, behind an ascending tub or set or train of tubs, a back-stay, drag or other
suitable contrivance for preventing the tub, set or train of tubs running back:
Provided that where an endless rope or chain is used, the provisions of this clause shall be
deemed to be satisfied if suitable automatic catches or other effective contrivances are provided at
suitable intervals along the track to prevent the ascending tubs running back:
Provided further that the Regional Inspector-cum-Facilitator may, by an order in writing and
subject to such conditions as may be specified therein, grant exemption from the operation of this
clause on grounds that compliance with the provisions thereof are not reasonably practicable;
(d) safety hooks, jazz-rails or other suitable contrivances to prevent runaway in the forward
direction;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 249
(e) tub re-railers at intervals of not more than 250 meters:
Provided that where a tub is re-railed manually, it shall either be detached from the rope or ropes
or the haulage engine which works the rope shall be stopped; and
(f) on every haulage roadway exceeding thirty meters in length, effective means of
transmitting signals by mechanical or electrical or electronic means from every stopping
place on the roadway to the place at which the machinery working the rope is operated:
Provided that the Regional Inspector-cum-Facilitator may, by an order in writing, require means of
transmitting signals in the reverse direction also;
(g) if any doubt arises as to whether any means of transmitting signal under clause (f) is
effective or not, it shall be referred to the Chief Inspector-cum-Facilitator for decision.
(5) The following code of signals shall be used and strictly observed, namely:-
ONE RAP : STOP when in motion
TWO RAPS : LOWER or haul in slowly
THREE RAPS : START when at rest
FOUR RAPS : RAISE or haul out slowly:
Provided that any other signals shall be in addition to, and shall not interfere with, the foregoing.
(6) A printed copy of the code of signals under sub-regulation (5), including additional signals, if
any, shall be posted prominently at the place in which the machinery that works the rope is operated
and at all regular stopping places along the roadway.
(7) No person other than a competent person or an official shall give any signal.
(8) Where in any mine belowground, a system of haulage roadways (and conveyors, if any) extends
to a distance of more than 300 meters from the shaft or the entrance to the mine, efficient telephonic
communication shall be provided and maintained between the end of every such system and to the
Haulage operator (and conveyor operator, if any) and the bottom and top of the shaft or the entrance to
the mine, as the case may be:
Provided that where travelling is unduly arduous, the Regional Inspector-cum-Facilitator may, by
an order in writing, require the provision and maintenance of telephonic communication in any other
case also.
Provided further that a wireless or mobile communication system or any other system as approved
by Chief Inspector-cum-Facilitator by general or special order may be used.
(9) Where telephones or electrical signals are provided,-
(a) adequate precautions shall be taken to prevent signal and telephone wires coming into
contact with other cables and electrical apparatus;250 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) signal wires shall be supported on insulators, and shall not be energised at more than thirty
volts;
(c) contact makers shall be so constructed as to prevent accidental closing of the circuit; and
(d) in every mine or part thereof to which regulation 153 applies, all signaling or telephonic
communication circuit shall be constructed, installed, protected, operated and maintained in
such a manner as to be intrinsically safe.
(10) At places where telephone receivers are installed or where signals and safety contrivances are
regularly operated, every person using the telephone or operating any such signal or safety contrivance
shall be afforded adequate protection against tubs moving out of control.
(11) Where any person is allowed to work or pass while the haulage is in motion, manholes for refuge
shall be provided at intervals of not more than 10 meters:
Provided that where the gradient is less than one in six, such manholes may be provided at intervals of
not more than 20 meters.
(12) Manholes shall be not less than 1.8 meters in height and 1.2 meters in depth, and not less than
0.75 meters but not more than one meter in width:
Provided that where the roadway is less than 1.8 meters in height, the manholes may be made to the
full height of the roadway:
Provided further that the Regional Inspector-cum-Facilitator may, by an order in writing and
subject to such conditions as may be specified therein, permit the use of manholes or cross-roadways
other than haulage roadways, of dimensions larger than those aforesaid.
(13) Where there are serious practical difficulties in providing manholes of the interval and the
dimension specified in sub-regulations (11) and (12), the Regional Inspector-cum-Facilitator may, by an
order in writing and subject to such conditions as may be specified therein, permit manholes to be at
greater intervals or of other dimensions.
(14) Every manhole shall be kept clean and clear of obstruction, and white washed both inside and for a
distance of not less than 0.3 meters around the aperture.
(15) As far as practicable, all manholes shall be provided on one side of the haulage roadway.
(16)Except where haulage is effected by means of an endless rope or chain, whenever the haulage rope
is in motion, every person on the haulage roadway shall take shelter in a manhole.
(17) The manager shall, by an order in writing, in respect of every haulage road or roadway, fix the
maximum number of loaded or empty tubs to be coupled together to run as a set or train and a notice
specifying the number of tubs so fixed shall be posted prominently at the top and at all regular stopping
places of the haulage road or roadway.
(18) At all places where tubs are coupled or uncoupled, there shall be a clear space of not less than
one meter –[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 251
(a) between, the tubs and one side of the roadway; and
(b) where there are two or more tracks also between the adjacent tracks
(19) When any roadway or face is in direct line with a haulage track and persons may be exposed to
danger from runaway tubs, a strong buffer or other effective contrivance to prevent such danger shall
be provided and maintained.
(20) A stop-block or other effective contrivance shall be provided near the entrance of every
tramming roadway branching off the main haulage road or roadway, and on every track which slopes
towards a shaft.
90. Travelling roadways. - (1) Except when an exemption has been granted by the Regional
Inspector-cum-Facilitator and subject to the conditions as may be specified therein, travelling roadways
in the intake airways separate from haulage roadways on which haulage is effected by mechanical
means or gravity, shall be provided for persons to travel to and from their working places.
(2) Every travelling roadway shall –
(a) be not less than 1.8 meters high for the entire stretch;
(b) where the inclination exceeds 30 degrees from the horizontal, be provided with suitable
steps or ladders;
(c) where the inclination exceeds 45 degrees from the horizontal, be provided, in addition to
steps or ladders, with hand rails or ropes so as to ensure safe travel;
(d) where the inclination exceeds 60 degrees from the horizontal, be provided, in addition to
the steps or ladders and rails or ropes, with suitable platforms at intervals not exceeding 10
meters measured along the slope;
(e) be provided with effective means of telecommunication facilities at suitable places; and
(f) be provided with adequate number of suitable digital display boards and communication
ports through which any important message or information can be easily transmitted or
broadcasted to persons working belowground or passing thereby.
(3) Except for purposes of inspection, examination or repair, every person other than an official or a
haulage attendant shall travel by the travelling roadway.
(4) Where persons using a travelling roadway have to cross a conveyor or a haulage worked by
mechanical means or gravity, a suitable cross-over or cross-under bridge or other suitable device
approved by the Regional Inspector-cum-Facilitator shall be provided.
(5) Where a conveyor roadway is required to be used as a travelling roadway, suitable guards or
fencing of substantial construction shall be provided throughout such length of the conveyor roadway,
which is intended to be used as travelling roadway.252 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) In case the traveling distance from the incline or adit mouth or pit bottom exceeds one kilometer
or the travelling is arduous, the owner, agent and manager shall provide suitable man-riding
arrangement as approved by the Chief Inspector-cum-Facilitator, within one year from the date
of coming into force of these regulations.
(7) No haulage or other mechanised means shall be used for the general conveyance of persons
except with the prior permission in writing of the Chief Inspector-cum-Facilitator and subject to such
conditions as may be specified therein.
91. Tubs and their movement. - (1) On every tub there shall be provided and maintained at each
coupling end a strong buffer projecting beyond the end and so arranged that when two such tubs are in
tandem, the gap between the innermost ends shall not be less than 20 centimetres.
(2) On every side-tipping tub in use, safety-catches shall be provided to prevent accidental tipping
and no tub or set or train of tubs shall be set in motion unless all the safety catches are properly
secured.
(3) The attachment between a rope or locomotive and a tub or set or train of tubs and the
attachment between any two tubs in a set or train, shall be of a type approved by the Chief Inspector-
cum-Facilitator by a general or special order and so maintained as to obviate accidental disconnection.
(4) The state of every buffer and drawbar of every tub in use and of every safety-catch, coupling-
chain and other attachment shall be examined once at least in every fourteen days, by a competent
person appointed for the purpose and a report of every such examination shall be recorded in a bound
paged book kept for the purpose or in retrievable and non-editable electronic form, which shall be
signed or e-signed and dated by the person who made the examination.
(5) Each component of coupling shall have factor of safety of not less than seven in relation to
maximum static load which shall be ensured by testing at an interval not exceeding three years and
record thereof shall be maintained.
(6) When tubs are about to be moved and when the tubs are in motion, persons likely to be
endangered shall be warned by Audio-visual warning alarm.
(7) Two or more tubs shall not be moved by hand in close succession but shall be coupled and
moved together:
Provided that two tubs shall be deemed to be in close succession when the distance between them at
any time is less than 10 meters.
(8) No person shall cause or permit a tub to run uncontrolled except with the written permission of
the manager:
Provided that the Regional Inspector-cum-Facilitator may, by an order in writing, prohibit the
uncontrolled movement of tubs at any place if he or she is of the opinion that such movement is likely to
cause danger.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 253
(9) No person while taking a tub down a gradient exceeding one in twenty, shall go in front of the tub;
and in every case where conditions are such that a person is not in a position to control the tub from
behind, person shall not take the tub down unless sprags or other suitable contrivances are used to
control it.
(10) Where required for use, a sufficient number of sprags of suitable material and dimensions shall be
provided.
(11) Every tub while standing on a track having a gradient of more than one in twenty shall unless held
effectively by brakes or securely coupled to a haulage rope or locomotive, be effectively blocked,
chained or otherwise secured.
(12) Except where haulage is effected by means of an endless rope, the coupling and uncoupling of tubs
shall, as far as practicable, be done only when the tub or set of the tubs, and the rope if connected to
the set, is not in motion.
(13) As far as practicable, tubs shall not be coupled or uncoupled on a gradient.
(14) No person shall ride on any tub or haulage rope.
92. Haulage engines and engine room. - (1) Every haulage engine shall be provided with:-
(a) two independent brakes out of which at least one of the brakes shall be so designed that
the brakes remain at the “ON” position except when operated.
Provided that where the brake or brakes are power operated, at least one of them shall be
arranged to be applied automatically at all times if the power supply fails.
(b) speed indicator, distance indicator and over speed tripping arrangement,
(c) suitable rope guard to safeguard haulage operator from whiplash due to rope snap,
(d) a suitable dead man switch,
(e) forward-reverse operating device with interlocking arrangement,
(f) over travel protection
(g) emergency stop push button
(2) (a) Every haulage engine shall be housed in engine room properly white washed or colour
washed and having emergency exit, adequate illumination, ventilation and ergonomically
designed seat for operator
(b) Adequate access for examination of engine foundation, brake assembly etc shall be
provided and maintained.
93. Haulage ropes. - (1) No rope shall be used for purposes of haulage if it has any serious visible
defect over any length or its factor of safety is less than eight.
(2) Every rope which is capped shall be recapped once at least in every six months, and if necessary, at
shorter intervals, under the supervision of a competent person.
(3) No rope which has been spliced shall be used in direct haulages.254 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) For every haulage rope in use, a record of size, construction, quality, name of supplier, and dates of
installation and of recapping shall be kept in a bound paged book kept for the purpose or in retrievable
and non-editable electronic form, and all entries therein shall be made by the competent person who
shall sign or e-sign the same and date his or her signature.
94. Protection at loading chutes. - (1) Every chute where tubs and other means of conveyance are
loaded shall be provided with suitable gates for holding back the column of material.
(2) The control panel for operation of chute gate shall be at a safe distance from bunkers or chutes.
95. Conveyor Installations. - (1) Every conveyor shall be so installed that –
(a) either side of the conveyor, there is a travelling space free from obstruction not less than
one meter wide;
(b) the conveyor or any part thereof does not scrape against wooden props or supports;
(c) the anchoring of the return station of the conveyor is secured and independent of the face
or roadway support;
(d) in case a number of conveyors are used in series, safety fittings such as sequential control
and sequential interlock shall be provided; and
(e) it can be stopped from any place along the entire length of the conveyor by providing pull
cord switches or other suitable system at an interval not exceeding every 30 meters.
(2) (a) Inclination of the conveyor shall be designed in such a way that there is no roll back of
material conveying;
(b) Conveyor roll back protection arrangement shall be provided.
(3) On every length of roadway in which a conveyor is installed for transporting loads over a distance
exceeding 30 meters, there shall be provided and maintained effective means of transmitting signals
from every point on the length of the roadway to the place at which the machinery working the
conveyor is operated:
Provided that the Regional Inspector-cum-Facilitator may, by an order in writing, require means of
transmitting signals in the reverse direction also.
(4) The conveyor operator and the cabin or place from where the conveyor is operated shall be provided
with an effective means of telecommunication along with broadcasting facilities through which the
operator can communicate to any person present in the conveyor roadway at any place of the
installation and such system of telecommunication shall have facilities of both way communications.
(5) Audio-visual pre-start warning alarm shall also be provided in the entire length of the roadway
conveyor so as to warn persons of imminent dangers due to starting of the belt conveyor.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 255
(6) (a) The manager shall formulate a code of practice for safe installation, operation, maintenance
and use of conveyor including extension of belt conveyor and shifting it from one place in
the mine to another and submit the same to the Regional Inspector-cum-Facilitator at least
thirty days before the commencement of the installation of the conveyor; and the Regional
Inspector-cum-Facilitator may, at any time by an order in writing, require such modification
in the code of practice as he or she may think fit in the interest of safety.
(b) The Conveyor belt used belowground or in confined space of opencast working shall be of
fire-resistant type.
Provided that in case of technical difficulties, the Chief Inspector-cum-Facilitator may grant
exemption subject to conditions as may be specified therein.
(7) The manager and engineer shall both be responsible for implementation of the code of practice.
(8) Adequate arrangement shall be provided in the belt conveyor to ensure that it gets automatically
stopped,-
(a) in case of excessive friction between the belt and the drum, roller, scrapper, deflectors,
guides or any other obstruction caused either due to spillage or otherwise;
(b) in case slippage of belt on drum;
(c) in case of breakage of the belt; and
(d) in case of fire or heating in the belt conveyor or in the vicinity thereof.
96. Examination of haulage engines, rope and track etc. - (1) It shall be the duty of a competent
person to examine carefully -
(a) once at least in every twenty-four hours, every haulage engine, brake-wheel, rope and
other appliance in use; and
(b) once at least in every seven days, every track where the haulage is effected by means of
mechanical power or gravity, and every safety contrivance fitted thereon.
(2) A report of every such examination under sub-regulation (1) shall be recorded in a bound paged
book kept for the purpose or in retrievable and non-editable electronic form, and shall be signed or e-
signed and dated by the person who made the examination.
97. Examination of haulage and travelling roadways. – It shall be the duty of the mining
supervisor or other competent person to examine carefully, once at least in every seven days, the state
of all haulage and travelling roads and roadways, including roadways leading to all the outlets of the
mine which are in use and a report of every such examination shall be recorded in a bound paged book
kept for the purpose or in retrievable and non-editable electronic form, and shall be signed or e-signed
and dated by the person who made the examination.256 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
98. Locomotives. - (1) No locomotive shall be used belowground otherwise than in accordance with
the permission of the Chief Inspector-cum-Facilitator and subject to such conditions as may be specified
therein.
(2) No locomotive shall be used where the gradient of the track exceeds one in fifteen.
(3) No person other than the operator shall ride on any locomotive unless authorised in writing to
do so by the manager.
(4) Except during shunting operations, the locomotive shall lead the tubs or set or train of tubs.
99. Roads for trucks and dumpers. - The design, construction, dimensions and layout of haul roads
(including ramps) and of parapet walls or embankments or berms, to be provided along the edge of any
road that exists above the level of surrounding area or of any spoil or dump, shall be as per the
standards and parameters specified by the Chief Inspector-cum-Facilitator, from time to time by general
order.
100. Movement of wagons. - (1) The movement of railway wagons shall be carried on under the
supervision of a competent person.
(2) Before wagons are moved, persons likely to be endangered shall be warned by Audio-visual
warning alarm.
(3) No person shall move or attempt to move a wagon by pushing at the buffer, or by pulling from
in front.
(4) No locomotive or wagon shall be moved when the natural light is insufficient, unless the
approaching end is distinguished by a suitable light or is accompanied by a person carrying a lamp.
(5) No person, shall pass immediately in front of wagons moving under bins or screens, nor
between moving wagons and the under-structure of the bins or screens.
(6) No person shall be upon the buffer of a locomotive or wagon in motion unless there is a secure
hand-hold, or stand thereon unless there is also a secure footplate.
(7) No person shall pass over the coupling between any two wagons while the wagons are moving.
(8) No person shall cross a line of rails by crawling or passing underneath a train or wagon, nor shall
a person sit or sleep underneath a wagon.
(9) Wherever railway wagons are specially placed so as to afford a thoroughfare, such thoroughfare
shall be not less than five meters in width.
(10) No material shall be placed or dumped within 1.2 meters from either side of a track of rails.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 257
(11) All space between the rails at switches and crossings in which the foot of a person is liable to be
caught shall be kept filled with concrete, tar, asphalt, or wooden blocks.
101. Fencings and gates. - (1) Where any haulage road, tramline, rail line or haul road passes over a
public road, suitable gates shall be provided to prevent danger to public from a moving tub, set or train
of tubs, locomotive or machinery and every such gate shall be fitted with a danger signal, and when the
natural light is insufficient, also with warning lamps.
(2) Where occupied buildings are situated within 15 meters of any haulage road, tramline, rail line
or haul road, a substantial fence shall be provided and maintained between such buildings and the
haulage road, tramline, rail line or haul road.258 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER- IX
MINE WORKING
102. Safety management plan. - (1) The owner, agent and manager of every mine shall-
(a) identify the hazards to health and safety of the persons employed at the mine to which they
may be exposed while at work;
(b) assess the risks to health and safety to which employees may be exposed while they are at
work;
(c) follow an appropriate process for identification of the hazards and assessment of risks;
(d) record the list of hazards identified and risks assessed; and
(e) make those records available for inspection by the employees.
(2) (a) The owner, agent and manager of every mine shall identify control measures against each
identified hazard, with priority in descending order as below:
(i) Elimination control
(ii) Substitution control
(iii) Engineering control
(iv) Administrative control
(v) Personal protective equipment
(b) The owner, agent and manager of every mine shall also ensure that effectiveness of the
existing control measures are monitored and reviewed periodically and appropriate
corrective actions are taken.
(3) Based on the identified hazards and risk analysis, the owner, agent and manager of every mine
shall prepare a document called “Safety Management Plan”, that includes organisational structure,
planning, activities, responsibilities, practices, procedures, processes and resources for developing,
implementing, achieving, reviewing and maintaining occupational safety, health and safe working
conditions in mines.
(4) The Safety Management Plan shall contain-
(a) defined mine safety and health policy of the company in consistent with applicable
provisions of the Code;
(b) a plan to develop capabilities to implement and achieve the objective of the policy;
(c) scheme of mining;
(d) Hazard Management Plans (HMPs) for each identified hazard including Principal Hazard
Management Plans (PHMPs) for principal hazards;
(e) Standard operating procedures (SOPs) for all activities and operations having potential to
cause harm to health and safety of persons;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 259
(f) ways to measure, monitor and evaluate performance of the safety management plan and
incorporates necessary changes; and
(g) a plan to periodically review at an interval not exceeding twelve months and/or when
significant changes occur in the mine and update the safety management plan accordingly.
(5) The owner, agent or manager of every mine shall submit a copy of the Safety Management
Plan, duly signed by the owner, to the Regional Inspector-cum-Facilitator who may, at any time by an
order in writing, require such modifications in the plan as may be specified therein.
(6) The owner, agent and manager of every mine shall be responsible for implementation of the Safety
Management Plan.
(7) In case of mines having an extent less than 10 hectares, Chief-Inspector-cum-Facilitator may exempt
such mines from the provision of this regulation by an order in writing and subject such conditions as
may be specified therein.
103. Manual opencast working. - In manual opencast workings, the following precautions shall be
observed, namely: -
(1) In alluvial soil, morum, gravel, clay, debris or other similar ground, -
(a) the sides shall be sloped at an angle of safety not exceeding 45 degrees from the horizontal
or such other angle as the Regional Inspector-cum-Facilitator may permit by an order in
writing and subject to such conditions as may be specified therein; or
(b) the sides shall be kept benched and the height of any bench shall not exceed 1.5 meters and
the breadth thereof shall not be less than the height:
Provided that the Regional Inspector-cum-Facilitator may, by an order in writing and subject to
such conditions as may be specified therein, exempt from the operation of this clause in any working in
the case of which special difficulties exist, which, in his or her opinion, make compliance with the
provisions thereof not reasonably practicable.
(2) Where any pillar is left ‘in situ’ for the purpose of measurement, its height shall not exceed 2.5
meters; and where the height of such pillar exceeds 1.25 meters, the base of the pillar shall not be less
than 1.5 meters in diameter.
(3) Where ‘float’ or other similar deposit is worked by manual means on a sloping face, the face shall be
benched and the sides shall be sloped at an angle of not more than 60 degrees from the horizontal and
the height of any bench shall not exceed six meters and the breadth thereof shall not be less than the
height:
Provided that the Chief Inspector-cum-Facilitator may, by an order in writing and subject to such
conditions as he may specify therein, exempt, from the operations of this sub-regulation, any working, in
the case of which special difficulties exist which in his opinion make compliance with the provisions
thereof not reasonably practicable.260 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) In an excavation in any hard and compact ground or in prospecting trenches or pits, the sides shall
be adequately benched, slopped or secured so as to prevent danger from fall of sides:
Provided that the height of the bench shall not exceed six meters.
(5) No tree, loose stone or debris shall be allowed to remain within a distance of three meters from the
edge or side of the excavation.
(6) No person shall undercut any face or side or cause or permit such undercutting as to cause any
overhanging.
104. Mechanised opencast working. - (1) Before starting a mechanised opencast working: -
(i) The owner and agent of the mine other than those specified in clause (iii) shall arrange to
conduct a scientific study of the mine, including its method of working, ultimate pit slope,
dump slope and monitoring of slope stability, in order to plan, design and work the mine in
safe manner.
(ii) Based on the recommendations of the aforesaid scientific study, the owner, agent or
manager shall prepare a detailed scheme of mining, covering method of work,
mechanization, pit and dump configuration, backfilling if any, system of monitoring of pit
and dump slopes, haul road design and other applicable parameters, and submit a notice
along with a copy of the scheme, at least sixty days prior to start the work in accordance
with the scheme, to the Chief Inspector-cum-Facilitator and the Regional Inspector-cum-
Facilitator; and work shall not be carried out except in accordance with such conditions as
may be specified by the Chief Inspector-cum-Facilitator by an order in writing:
Provided further that, in case of mines where such scheme of mining has not been made and
submitted, it shall be the responsibility of the owner and agent to get the said scheme prepared and
submit to the Chief Inspector-cum-Facilitator and the Regional Inspector-cum-Facilitator, within one year
from the date of coming into force of these regulations and work shall not be carried out except in
accordance with such conditions as may be specified by the Chief Inspector-cum-Facilitator by an order
in writing:
(iii) In case of mines, having an extent less than 10 hectares, such scheme may be prepared
and submitted without a scientific study.
(iv) The owner, agent and manager of every mechanised opencast mine shall ensure that the
recommendations made in the report of scientific study referred to in clause (i) of the sub-
regulation (1) wherever applicable are complied with and workings and operations in the
mine strictly adhere to the scheme or modified scheme of mining, as referred in clause (ii)
or clause (iii) of the sub-regulation (1), as the case may be.
(2) The Scientific study referred to in clause (i) of the sub-regulation (1), the scheme of mining as
mentioned referred in clause (ii) of the sub-regulation (1) and the scheme of mining as mentioned
referred in clause (iii) of the sub-regulation (1) shall be reviewed time to time and whenever there is a[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 261
major change in method of workings, mechanization, geo-mining condition, identification of any new
hazards in the mine.
(3) The height of the benches in overburden consisting of alluvial soil, morum, gravel, clay, debris or
other similar ground shall not exceed 3 meters and the width thereof shall not be less than three times
the height of the bench.
(4) The height of benches in ore and overburden of rock formation other than that mentioned in sub-
regulation (3) shall not be more than the digging height or reach of the excavation machine in use for
digging, excavation or removal, and the width thereof shall not be less than -
(a) the width of the widest machine plying on the bench plus two meters; or
(b) if dumpers ply on the bench, three times the width of the dumper; or
(c) the height of the bench,
whichever is more.
(5) No extraction of belowground developed workings by opencast method shall be commenced,
conducted or carried out except with the prior permission in writing of the Chief Inspector-cum-
Facilitator and in accordance with such conditions as may be specified therein.
(6) Notwithstanding anything contained in this regulation, the Chief Inspector-cum-Facilitator may, by an
order in writing and subject to such conditions as may be specified therein, require or permit the height
and width of benches or any other condition in variance with the aforesaid.
105. Backfilling of opencast workings. – (1) All excavations made by opencast mining shall be
suitably backfilled up to the level of adjacent ground or kept secured by suitable means as specified in
the scheme of mining referred in the sub-regulation (1) of regulation 104.
(2) The owner, agent or manager shall submit to the Chief Inspector-cum-Facilitator a scheme of
backfilling, including backfilling simultaneously with extraction as referred to in regulation 104, partial
backfilling of the mine at the time of abandonment if so proposed and the Chief Inspector-cum-
Facilitator may by an order in writing approve the scheme or require such modifications as may be
specified therein.
106. Spoil-banks and dumps. - (1) While removing overburden, the top soil shall be stacked at a
separate place, so that, the same is used to cover the reclaimed area.
(2) The slope of a spoil bank shall be determined by the natural angle of repose of the material
being deposited but, in any case, shall not exceed 37.5 degrees from the horizontal:
Provided that where in any mine, a steeper slope of spoil bank has been recommended as a result
of a scientific study, the Chief Inspector-cum-Facilitator may, by an order in writing and subject to such
conditions as may be specified therein, permit a steeper slope of the spoil bank.262 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) Loose overburden and other such materials from opencast workings or other rejects from
beneficiation plant or from other sources shall be dumped in such a manner that there is no possibility of
dumped material sliding.
(4) Any spoil bank exceeding 30 meter in height shall be benched so that no bench exceeds 30
meter in height and the overall slope shall not exceed 1 vertical to 1.5 horizontal.
(5) The spoil-bank or dump in an opencast mine shall be planned, designed and maintained as per the
recommendations of the scientific study and the scheme of mining referred to in sub-regulation (1) of
regulation 104:
Provided that the toe of an external spoil-bank or dump shall not be extended closer to any point
within a distance of one and half times the height of the spoil-bank or dump or 50 meters, whichever is
more, from the mine excavation, railway or other public works, public road or building or other
permanent structure not belonging to the owner,
Provided further that, the Chief Inspector-cum-Facilitator may, by an order in writing and subject
to such conditions as may be specified therein, require or permit the toe of spoil bank or dump to be
extended in variance with the aforesaid provisions.
(6) In case of rehandling of spoil bank or dump in an opencast mine, the owner, agent or manager shall
not less than 60 days before starting of work, submit a detailed scheme of rehandling of spoil bank or
dump, to the Chief Inspector-cum-Facilitator and the Regional Inspector-cum-Facilitator; and work shall
be commenced or carried only in accordance with such conditions as the Chief Inspector-cum-Facilitator
may specify by order.
(7) A suitable fence shall be erected between any railway or public works or road or building or
structure not belonging to the owner and the toe of an active spoil bank so as to prevent un-authorised
persons from approaching the spoil-bank.
(8) No person shall approach or be permitted to approach the toe of an active spoil bank where
person may be endangered from material sliding or rolling down the face.
(9) Adequate precautions shall be taken to prevent failure of slopes of the spoil banks or dumps.
107. Transport rules. - (1) The manager of every mine shall frame and enforce a code of transport
rules with due regard to the size and capacity of the transportation machinery in use and prevailing local
conditions and a copy of the same shall be submitted to the Regional Inspector-cum-Facilitator, who
may, at any time, by an order in writing require such modifications in the transport rules, as may be
specified therein.
(2) The manager shall hand over copies of the transport rules to all operators and officials
concerned and shall also post such copies at all conspicuous places in the mine in languages
comprehensible by the workers.
(3) The Manager and such officials shall each be responsible for securing effective compliance with the
provisions of the transport rules, and no mine or part of a mine shall be worked in contravention thereof.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 263
108. Codes of practice. - (1) The manager of every mine shall, before introducing any machinery or
new operation connected with his or her mine, frame and enforce “code of practice”, not being
inconsistent with the Code or these regulations, for each such machinery or operation, as the case may
be.
(2) The codes of practice shall be framed with due regard to the type, size and capacity of the
machinery or operation in use or proposed for use as per the prevailing local conditions.
(3) The codes of practices, inter alia, shall provide for-
(a) standard operating procedures for the machinery or operation to which it relates to;
(b) examination and testing of the machinery before first use after erection, installation, re-
installation, modification, alteration, maintenance or repair;
(c) schedule and nature of examination and testing of the machine, including its sub-
assemblies, so as to ensure its safe operation; and
(d) the manner in which the records of examination shall be kept.
(4) The owner, agent or manager of every mine shall hand over copies of such code of practices to
concerned officials and persons and ensure effective enforcement thereof.
(5) A copy of the code of practices framed under sub-regulation (3) shall always be kept in the
office of the mine and also at respective places of such operation or machinery.
109. Underground working. - In every mine worked by a system of working belowground, the
following provisions shall have effect, namely –
(1) Unless otherwise permitted by the Chief Inspector-cum-Facilitator by an order in writing and
subject to such condition as may be specified therein, the height of every main drive shall not be less
than 1.8 meters and not more than 3.0 meters and the width thereof shall not exceed 4.8 meters.
(2) The dimensions of roadways, pillars or blocks formed in waste, vein, load, reef or mineral bed or
deposit and sequence of extraction shall be based on scientific study so as to ensure stability of the
working during the development and stoping stages, and between such stages:
Provided that if the Chief Inspector-cum-Facilitator is of the opinion that the aforesaid dimensions
are such as to render premature collapse of any part of the workings, may by an order in writing,
require such modifications of the dimensions and protective measures to be taken in respect of any
workings, as may be specified therein.
(3) No extraction or splitting or reduction of pillars or blocks of minerals shall be commenced,
conducted or carried out except with the prior permission in writing of the Chief Inspector-cum-
Facilitator and in accordance with such conditions as may be specified therein.
(4) An application for such permission referred in sub-regulation (3) shall be accompanied by an
up-to-date plan of the area where the pillars or blocks of minerals are proposed to be extracted or
reduced, showing the proposed extent of extraction or reduction, the manner in which such extraction or
reduction is proposed to be carried out, the thickness and other characteristics of the mineral deposit,
the rate and direction of general dip and of the pitch of the vein, the nature of hangwall and footwall,264 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
the stoping width, the depth of the workings, scientific study report and such other particulars as the
Chief Inspector-cum-Facilitator may require.
(5) The operations of extraction, splitting and reduction of pillars or blocks of mineral shall be
commenced, conducted or carried out in such a manner as to prevent, as far as possible, the extension
of a collapse in the stopped-out area over-riding the pillars or blocks of minerals that have not been
extracted.
110. Saving. - (1) Nothing in regulation 109 shall prevent the splitting or reduction of any pillar or
block of mineral bed or deposit where, in the opinion of the manager, such work is necessary for
haulage, ventilation, drainage, or any other purpose necessary for the proper working of the mine, if
fourteen days prior notice in writing of the intention to commence such work has been given to the
Regional Inspector-cum-Facilitator.
(2) Every notice under sub-regulation (1) shall be accompanied by an offset plan, showing details of
the operation:
(3) If in the opinion of the Regional Inspector-cum-Facilitator such work under sub-regulation (1) is
likely to endanger the stability of the workings, he or she may, by an order in writing, require the
completion, before commencing such drivage or enlargement, of such protective works as may be
specified therein.
111. Roads and working places. - (1) The roof or back, hanging wall, foot wall and sides of every
roadway and working place, including airways and travelling roadways to second outlets, shall be made
and kept secure.
(2) Necessary arrangements shall be made to prevent the premature collapse of workings; and
adequate steps shall be taken to isolate, control or remedy any such collapse which may occur.
(3) Whenever crushing of pillars or any symptoms of an impending collapse other than an ordinarily
caused by extraction or reduction of pillar or block or mineral is detected, the manager shall
inform the Regional Inspector-cum-Facilitator forthwith.
112. Powers of Inspector-cum-Facilitator. - (1) If in any mine or part thereof, it appears to the
Regional Inspector-cum-Facilitator that the provisions of regulations 103, 104, 109 and 111 or of any
order issued under any of these regulations have not been complied with, he or she may give notice in
writing to the owner, agent or manager requiring him or her to take such protective measures, within
such time as may be specified in the notice.
(2) In case of non-compliance with the requirements of the notice issued under sub-regulation (1), the
Regional Inspector-cum-Facilitator may, by an order in writing, prohibit, the extraction of mineral in the
part or parts of the mine in which protective measures are required to be taken, until the requirements
specified in the notice are complied with.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 265
113. Pointing out of contraventions during inspections. – (1) If the Chief Inspector-cum-
Facilitator or an Inspector-cum-Facilitator, during his or her inspection of any mine, finds or comes to
know about contravention of any of the provision of the Code or the regulations, rules, bye-laws or
orders made thereunder, he or she shall enter such contravention in Spot Inspection Register
maintained in a Form as may be specified by the Chief Inspector-cum-Facilitator for the purpose or in
retrievable and non-editable electronic form, and shall also point out such contravention to the owner,
agent or manager, if present on the spot.
(2) The Chief Inspector-cum-Facilitator or the Inspector-cum-Facilitator making the entry of the
contraventions in the register referred to in sub-regulation (1) shall duly sign or e-sign such entries with
date, and take a copy of the entries for his or her record:
Provided that the Chief Inspector-cum-Facilitator or the Inspector-cum-Facilitator need not enter
such contravention which require confirmation after a survey or further examination, and he or she may
subsequently intimate the owner, agent or manager, specifying the contravention, if confirmed, and also
any other contraventions which were, not entered in the said register:
Provided further that an entry made in the register or the absence of an entry therein, as also a
communication in pursuance with the first proviso or absence thereof, shall not in any way limit the
duties or obligations of a person under the Code or the regulations, rules, bye-laws or orders made
thereunder.
(3) When an entry is made in the register, –
(a) the owner, agent and manager shall each be deemed to know what is contained in that
entry; and
(b) a copy thereof shall be displayed immediately on the notice board of the mine for not less
than fifteen days.
(4) The owner, agent or manager of the mine shall return one copy, within a period not exceeding
fifteen days from the date of the entry, to the Chief Inspector-cum-Facilitator or the Inspector-cum-
Facilitator who made the entry with remarks thereon showing the action taken to remedy the
contravention and the date on which such action was taken.
(5) The register shall be kept available for inspection in the office of the mine for a period of at least
three years after the date of making of the last entry in it.
114. Working under railways and roads, etc. - (1) No working shall be made and no work of
stoping or extraction or reduction of pillars or blocks of minerals shall be conducted at, or extended to,
any point within 45 meters of any railway, or of any public works in respect of which this regulation is
applicable by reason of any general or special order of the Central Government, or of any public road or
building, or of other permanent structure not belonging to the owner of the mine, without the prior
permission in writing of the Chief Inspector-cum-Facilitator and subject to such conditions as may be
specified therein.
(2) Every application for permission under sub-regulation (1) shall specify the position of the
working of the mine in relation to the railway or public road or works or building or structure concerned,266 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
the manner in which it is proposed to carry out the intended operations, and the limits to which it is
proposed to carry out the said operations; and shall be accompanied by two copies of a plan showing
the existing and the intended mining operations in so far as they affect the railway or public road or
works or building or structure concerned.
(3) Every copy of the application for permission referred to in sub-regulation (2) shall also be sent in
the case of a railway, to the railway administration concerned; and in the case of any public works as
aforesaid, to such authority as the Central Government may direct by general or special order.
(4) Notwithstanding anything contained in these regulations, the stability of such railway, road,
works, building or structure shall not be endangered until it has been dismantled, diverted or vacated, as
the case may be.
(5) Where the stability of such railway, road, works, buildings or structure has been endangered due
to any mining operations, the Chief Inspector-cum-Facilitator may, by an order in writing, require the
owner to construct in the mine belowground or on the surface such protective works within such time as
may be specified in the order.
115. Protective works before a mine is closed.- (1) When it is intended to abandon or close a
mine, the owner, agent or manager shall submit the details in writing in the Form as specified from time
to time by general or special order and manner as may be specified by the Chief Inspector-cum-
Facilitator for the purpose, to the Chief Inspector-cum-Facilitator, the Regional Inspector-cum-Facilitator
and to the District Magistrate stating the reasons for such abandonment, not less than thirty days before
such abandonment or closure.
(2) The Chief Inspector-cum-Facilitator may, by an order, require the owner of any mine to which sub-
regulation (1) applies, to construct in the mine belowground or on the surface such protective works
within such time as may be specified therein.
(3) If the owner fails to construct such protective works within the time specified in the order
referred in sub-regulation (2), the Chief Inspector-cum-Facilitator may get the works executed by any
other agency, and the cost thereof, as certified by the Chief Inspector-cum-Facilitator, shall be defrayed
by the owner of the mine and recoverable from him or her as an arrear of land revenue.
(4) Until the protective works have been constructed, in accordance with the requirements laid
down by the Chief Inspector-cum-Facilitator, the means of entering the mine at not less than two
entrances, shall be kept intact and in working order.
116. Working near mine boundaries. - (1) The owner, agent or manager of every mine shall have
fixed mine boundary in a vertical plane and notwithstanding anything contained in sub-regulation (2),
these shall not be changed except with the previous permission in writing of the Chief Inspector-cum-
Facilitator and subject to such conditions as may be specified therein:[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 267
Provided that if any opencast mine consists of two or more separate excavations and if, in the
opinion of the Chief Inspector-cum-Facilitator, they are not sufficiently near to one another to permit
daily personal supervision being exercised by one manager, the Chief Inspector-cum-Facilitator may, by
an order in writing, require the mine to be split into two or more separate mines.
Provided further that in case of change in the boundary of a mine, a plan showing the new
boundary shall be submitted within seven days of the said change.
(2) No working shall be made within a distance of 7.5 meters of the boundary of any mine, and in
case of a disputed boundary, no working shall be made within a distance of 7.5 meters of the boundary
claimed by the owner of an adjacent mine until such time a binding agreement has been reached as to
the correct boundary or the question has been finally determined by a court of law:
Provided that, where the workings of any mine, for any reason, are extended or get extended
within any shorter distance than what is laid down herein above, the Chief Inspector-cum-Facilitator
may, by an order in writing, require the owner to construct such protective works within such time as
may be specified in the order.
(3) Notwithstanding anything contained in sub-regulation (2), the Chief Inspector-cum-Facilitator
may, by an order in writing and subject to such conditions as may be specified therein, permit or require
to extend or restrict the working of any mine or part thereof in variance with the provisions of this
regulation.
117. Strata Control and Monitoring Plan. - (1) (a) The owner, agent and manager of every mine
shall prepare, formulate and implement a strata control and monitoring plan (SCAMP) based on scientific
study considering the geotechnical data, information and the method of development and extraction of
mineral or the excavation required therefrom, which also includes a support plan to secure the roof or
back, hanging wall, foot wall, and sides at belowground workplaces, and shall be subject to revision with
change in condition, for all workings belowground;
(b) The owner, agent and manager shall submit a copy of the Strata Control and Monitoring
Plan (SCAMP) to the Regional Inspector-cum-Facilitator who may, at any time by an order
in writing, require such modification as may be specified therein.
(2) The owner, agent and manager of every mine having workings belowground shall, before
commencing any operation, frame, in consonance with the strata control and monitoring plan framed
under sub-regulation (1) and with due regard to the engineering classification of strata, local geological
conditions, system of work, mechanisation, and past experience, and enforce the support plan specifying
in relation to each working place the type and specifications of supports and their intervals:
Provided that in respect of a mine where development operations are already in progress, the
support plan shall be framed and enforced within 30 days of the date of coming into force of these
regulations.268 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) The manager shall, at least thirty days before the commencement of any operation, submit a
copy of the support plan framed under sub-regulation (2) to the Regional Inspector-cum-Facilitator who
may at any time, by an order in writing, require such modification in the plan as may be specified
therein.
(4) The manager shall hand over copies of the support plan framed under sub-regulation (1) and
(2), in English as well as in a local language understood by majority of the persons employed in the
mine, together with illustrative sketches, to all supervisory officials concerned including the assistant
manager and shall also post such copies at all conspicuous places in the mine.
(5) The manager and such officials shall be responsible for securing effective compliance with the
provisions of the support plan framed under sub-regulation (1) and (2), and no mine or part of a mine
shall be worked in contravention thereof.
(6) The support plan shall include inter-alia, system of, monitoring of the support performance,
measurement of strata behaviour, re-setting of supports, provision of temporary support, replacement of
old supports, withdrawal of supports and clearing of falls of ground.
(7) The support plan shall also include the implementation strategy of the plan, training and
inspection and supervision policies.
(8) The owner, agent or manager shall formulate and implement a standing orders specifying –
(a) the system and the organisation for procurement and supply of supports of suitable
material, of adequate strength and in sufficient quantity where these are required to be
readily available for use;
(b) the method of handling including dismantling and assembling where necessary and
transportation of the supports from the surface to the face and from the face line to their
new site;
(c) the system and the organisation for maintenance and checking of supports, dressing the
roof or back, hanging wall, foot wall, and sides, erecting, examining and re-tightening of
supports and re-erecting dislodged supports, including the use of appropriate tools;
(d) the panel of competent persons for engagement as substitutes in the event of a regular
support person or dresser absenting from duty; and
(e) the manner of making all concerned persons such as loaders, dressers, support person,
blasters, assistant mining supervisors, mining supervisors and assistant managers including
persons empanelled for engagement as substitute support person or dresser fully
conversant with the support plan and the standing orders under this sub-regulation and
under regulation 122 and the nature of work to be performed by each in that behalf.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 269
118. Setting of support. – (1) Every piece of timber used as a support shall be set securely and on a
secure foundation; and whenever it becomes loose or broken, shall as soon as possible, be tightened or
replaced.
(2) Every crib-set or pigstye used as a support shall be well built on a secure foundation, and shall
be made and kept tight.
(3) Only rectangular pieces of material shall be used as members of a crib set or pigstye; so however
that in case of timber it shall be sufficient to joggle two opposite sides to provide flat surfaces.
(4) The sides of every pack used for the purpose of support shall be well built on secure foundation
and the pack shall be filled with debris or other suitable incombustible material, if so required by the
Regional Inspector-cum-Facilitator as shall be made as tight as practicable over its whole area.
(5) Where sand or other material is stowed for the purpose of support, it shall be packed tight.
(6) Except where it is no longer necessary for purposes of support, any support dislodged by or
removed for any operation shall be replaced with the least possible delay.
(7) In every place wherein a fall of ground involving the displacement or breakage of supports has
occurred, no work of clearing the fall or any part thereof shall be undertaken until the newly exposed
roof or back, hanging wall, footwall or side has been examined and made safe, if necessary, by
temporary supports.
(8) Notwithstanding anything contained in sub-regulation (6), only such minimum number of
persons may be engaged under the supervision of an assistant mining supervisor or mining supervisor as
may be necessary for securing the roof and sides thereat.
(9) Where roof bolts are used for support, the bolts shall be securely fixed in place.
(10) The support of roof or back, hanging wall, foot wall, and sides shall be tested as often as
necessary; and except where it is no longer necessary for the purpose of support, any support loosened,
broken or dislodged by or removed in any operation shall be tightened, replaced or reset with the least
possible delay and particularly before persons are allowed to pass or resume work after an interruption.
119. Provision of roof canopies or cabs.- (1) Electrical, battery, or diesel-powered, self-propelled
machinery including side discharge loaders, load haul dumpers, dump trucks used belowground shall be
provided with substantially constructed roof canopies or cabs which shall give adequate protection
against falling of ground from the roof or back, hanging wall, foot wall, and sides.
(2) The cabin or seat of the operator provided in such machine shall be ergonomically designed and
shall be such that the operator has clear line of sight in front as well as at rear of the machine.
120. Steep working. - (1) In working having an inclination of 30 degrees or more from the horizontal,
adequate precautions shall be taken to prevent danger to persons from falling or rolling of timber, tools
or other appliances or material.270 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) No person shall work or be permitted to work at any place having an inclination of 45 degrees or
more from the horizontal, where person is likely to slip or overbalance, unless person is secured by a
safety belt or life line or is otherwise safeguarded.
121. Fencing and gates. - (1) The top of every opencast working shall be kept securely fenced.
(2) Where an excavation which has been formed as a result of any mining operation, extends within a
distance of 15 meters from a public road or any building, substantial fencing by a structure of a
permanent nature shall be erected and maintained around the excavation.
(3) Where as a result of mining operations, a subsidence of the surface has taken place or is likely
to take place and persons are likely to be endangered thereby, the owner, agent or manager shall keep
the entire surface area securely and effectively fenced.
(4) Every entrance to a shaft, winze, ore-pass, chute, sump, stope, or other dangerous place shall
be provided with an efficient fence, barrier or gate, so designed and constructed as to effectively
prevent any person from entering or falling therein.
(5) Where a shaft, winze, raise, chute, ore-pass or stope having an inclination of more than 30
degrees from the horizontal leads directly into a working place or travelling roadway, such place or
roadway and any working place situated on its dip side, shall be securely guarded or otherwise protected
as to prevent danger to persons from falling materials.
(6) Every entrance from a roadway into a mine or part thereof which, for the time being, is neither
being worked nor being used for any purpose, by reason of any cause whatsoever, shall be provided
with fence, barrier or gate so designed and constructed as to prevent any person from inadvertently
entering that part of the mine.
(7) Shafts and opencast workings temporarily or permanently out of use and any place in or about
an excavation which is dangerous shall be completely filled in or kept securely fenced:
Provided that if in the opinion of the Regional Inspector-cum-Facilitator, any disused trench, pit or
other excavation is dangerous, may, by an order in writing, require the same to be filled in to the level
of the adjacent ground.
(8) Before a mine is closed or the working thereof discontinued, the owner, agent or manager shall
cause the top or entrance of every shaft, incline or other opening into the mine to be fenced by a
structure of a permanent character sufficient effectively to prevent persons falling into or entering the
same.
122. Examination by assistant mining supervisors. - (1) Every place in a mine, whether
belowground or in opencast working, including travelling roadways and landings, where work is carried
on or where persons are stationed or required to pass shall be placed under the charge of a assistant
mining supervisor or other competent person.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 271
(2) The mine or district assigned to an assistant mining supervisor or other competent person shall
not be of such a size, nor shall any additional duties other than assistant mining supervisor duties under
these regulations be such as to be likely to prevent assistant mining supervisor from carrying out in a
through manner the duties prescribed for assistant mining supervisor under these regulations, and if any
doubt arises as to the foregoing, it shall be referred to the Chief Inspector-cum-Facilitator for decision.
(3) At the entrance to every mine or district, one or more stations shall be fixed by the manager,
and except in the case of a mine working in a continuous succession of shifts, no person other than the
persons making the examination under sub-regulation (4) or an official shall pass beyond any such
station until all the roadways and working places to which persons are required to have access, have
been examined by the competent person in charge of the mine or district and found to be satisfactorily
ventilated and in safe condition.
(4) Every station referred to in sub-regulation (3) shall be legibly marked ‘STATION’ and shall be of
such a size as to accommodate all the persons employed in the district in any one shift.
(5) The assistant mining supervisor or other competent person accompanied by such assistants as
may be required shall, within two hours before the commencement of work in a shift, inspect every part
of the mine or district assigned to him or her, in which persons have to work or pass during the shift and
all roadways and working places where work is temporarily stopped and shall ascertain the condition
thereof as regards ventilation, sanitation, the presence of gases, the state of the roof or back, hanging
wall, footwall and sides, presence of heating and other fire risks, and generally so far as the safety of
the persons is concerned, and similar inspection shall be made once at least in every four hours during
which the shift continues, of all the roadways and other places to which persons engaged in the mine or
district are required to have access.
(6) The examination under sub-regulation (5), in case of a mine or part thereof to which regulation
153 applies, inspection shall be made with an approved flame safety lamp or any other approved
apparatus made for the purpose; and that of a mine or part thereof to which sub-regulation (1) of
regulation 131 applies, an apparatus for detecting carbon monoxide gas approved by the Chief
Inspector-cum-Facilitator.
(7) In case of opencast workings, the assistant mining supervisor shall pay attention to overhangs,
undercuts, presence of loose stone, materials or trees, etc., within 3 meters of the edges, foot paths for
traveling and carrying loads, fencing on top of the quarry and disused part or abandoned quarries,
fencing along footpaths and benches where required, use of personal protective equipment and
condition of dumps.
(8) The assistant mining supervisor or other competent person shall, at the completion of the shift,
record without delay the result of his or her inspections in a bound paged book in the format specified
for the purpose or in retrievable and non-editable electronic form, and every such report shall be an
accurate report of the inspections and shall include the following, namely:-
(a) the details referred to in sub-regulations (5) and (7);
(b) the number of persons working under his or her charge;272 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(c) such instructions for the purposes of securing the safety of the persons as he or she may
have given during his or her shift; and
(d) the date and time of the inspections, the signature or e-signature of the assistant mining
supervisor or other competent person, and the date and time when the report was written.
(9) In the case of a shaft in the course of being sunk, the competent person shall -
(a) have entire charge of the shaft bottom and shall, in his or her shift, remain in the shaft
while persons are at work at the bottom of the shaft;
(b) be the last person to ascend the shaft at the end of the shift and if his or her shift is
succeeded immediately by another shift, assistant mining supervisor shall not leave the
bottom of the shaft until after the descent of his or her reliever of the succeeding shift; and
(c) after each round of shots, and at the beginning of every shift, and after every cessation of
work in the shaft for a period exceeding two hours, shall examine the sides of the shaft
and, remove all loose pieces before persons are allowed to descend.
123. Avoidance of dangers. – (1) If at any time it is found by a competent person in charge of a
mine or district, that by reason of any cause whatsoever, the mine or district is dangerous, competent
person shall immediately withdraw all persons from the mine or district; and the mine or district shall be
fenced off so as to prevent persons inadvertently entering therein.
(2) The competent person shall also immediately inform the manager or assistant manager about
the danger, and shall record the fact in the bound paged book kept for the purpose or in retrievable and
non-editable electronic form.
(3) The manager shall make, or cause to be made by a competent person, a careful examination of
the mine or district; and no person shall, except in so far as is necessary for enquiring into the cause of
the danger or for the removal thereof or for exploration, be re-admitted into the mine or district until the
mine or district is reported to be safe.
(4) A report of every such examination under sub-regulation (3) shall be recorded without delay in a
bound paged book kept for the purpose or in retrievable and non-editable electronic form and shall be
signed or e-signed and dated by the person who made the examination.
(5) If the work of removing the danger is suspended before the danger is removed, the mine or
district shall be securely fenced off effectively to prevent persons entering therein during the period of
suspension.
(6) Notwithstanding anything contained in these regulations –
(a) where the danger arises from the presence of inflammable or noxious gas, the provisions of
regulation 153 shall apply; and
(b) where in any part of a mine the appearance of smoke or other sign indicates that a fire or
heating has or may have broken out, the provisions of regulation 127 shall apply.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 273
124. Working at height. - (1) No person shall work or travel on any ledge or footpath less than 1.5
meters wide, from where person is likely to fall more than 1.8 meters, unless person is protected by
guard rails, fence or safety belt or rope suitably fixed and sufficiently strong to prevent the person from
falling.
(2) When a plant, machinery, workshop or any other shed or structure is under construction, repair
or renovation, and persons are allowed to work at heights, proper walkway, stairs or ladderway with
hand rails, guards or stages and platforms with fencing shall be provided to avoid danger or risk of
persons falling from height.
(3) Every person permitted to work at height shall be provided, free of cost, with safety belt or
other suitable device of the type and standard suitable for the nature of work to be performed by the
person.
(4) Where it is required to work at heights involving danger or risk of falling, proper stage or
working platform of adequate and suitable design and strength shall be provided.
(5) The stage or working platform referred to in sub-regulation (4) shall have proper approach way
to and from the stage or platform for the persons to ascend or descend, as well as the fencing to
prevent such falls.
(6) A safety net of adequate strength and design or other suitable device shall also be provided
immediately below every working place so that the danger or risk of injuries to persons falling from
working at heights is eliminated.
(7) Standard operating procedure shall be framed by the manager and shall be implemented under the
supervision and control of a competent person and official especially authorised for the purpose by the
engineer and manager, to ensure such safety precautions while executing such work in the mine.
(8) Every person engaged for the execution of work involving working at heights shall be duly
trained in such work and shall possess adequate experience in the performance of such work.
(9) Where any work in a mine involving working at heights and the hazards incidental thereto is
undertaken, the manager shall ensure that a system of check-lists and issuance of work permits is
established and maintained.
125. General precautions.- (1) No person shall work in any place other than the authorised working
place.
(2) Every person shall—
(a) carefully examine the working place before commencing work and also at intervals during
the shift; and
(b) if any dangerous condition is observed, cease all work at that place and shall either take
immediate steps to remove such danger or inform an official or the competent person in
charge of the mine or district.274 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) Where several persons are working together and one of them is in-charge, the examination
required under sub-regulation (2) shall be made by the person in charge.
(4) No person shall carry or be permitted to carry any load along a road or footpath having an
inclination of 30 degrees or more from the horizontal.
(5) Every road or footpath, along which loads are carried by human agency, shall comply with the
following requirements, namely: -
(i) its breadth shall not be less than one meter; and
(ii) at every place where the inclination exceeds 15 degrees from the horizontal, level steps
shall be provided such that the vertical height of every step does not exceed 0.20 meter
and the distance from the edge to the back is not less than 0.35 meter.
(6) No person shall be employed to lift, carry or move a load so heavy as is likely to cause bodily
injury or injury to health of that person.
(7) Every person shall ensure that tools, wood, stones, or other articles are not put down or allowed
to remain, in or near a shaft, winze or opening into a stope where work is going on, in such position as
may result in their falling into the shaft, winze, or stope, as the case may be.
(8) No person shall work or be permitted to work alone in any remote part of a mine where, if any
accident occurred the person would not soon be discovered or assisted.
(9) No inexperienced person shall be employed in the mine for any work whereby he or she or other
persons can be seriously endangered, except under the supervision and guidance of an experienced
person.
(10) No person shall cast any material down any chute, ore pass or stope or other place until
person has assured himself or herself that no person is in the way.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 275
CHAPTER – X
PRECAUTIONS AGAINST DANGERS FROM FIRE, DUST, GAS AND WATER
126. General precautions against fire. - (1) No oil, grease, canvas or other inflammable material
shall be stored in any mine except in a fire-proof receptacle.
(2) Greasy or oily waste in workings belowground shall be regularly removed to the place on surface
specified by the manager and disposed of at regular interval.
(3) E-waste shall be disposed in a safe manner on regular basis.
(4) In case of opencast workings or workshops, greasy and oily wastes shall be disposed off
regularly in a safe manner.
(5) No person shall place or throw, or cause or permit to be placed or thrown, any naked light or
lamp or ‘cheesa stick’ or kai-piece’ on or near any timber, wooden structure or other combustible
material.
(6) Where explosives are used in blasting any timber forming part of stulls, sets and chutes
sufficient water shall be applied to the timber both before and after firing a shot.
(7) All surface structures and supports within a horizontal distance of 10 meters from all entrances to
a mine shall be of incombustible material:
Provided that this sub-regulation shall not apply to temporary structures, supports and coverings
at the top of a shaft or winze which is in the course of being sunk and to the small lid of a shaft-covering
operated by the rope cappel.
(8) Dead leaves or dry vegetation shall not be allowed to accumulate or remain, and combustible
materials other than material required for use within a period of twenty four hours, and inflammable
materials shall not be stored within a distance of 15 meters from any entrance to a mine, which is not
effectively sealed off from the working belowground.
(9) No person shall light a fire or permit a fire to be lighted on the surface within a distance of 15
meters from any entrance to a mine, except by the permission in writing of the manager and only for a
special purpose specified therein and all such permissions shall be recorded in a bound paged book kept
for the purpose or in retrievable and non-editable electronic form:
Provided that this sub-regulation shall not apply to boilers other than vertical boilers.
(10) Except with the previous permission in writing of the Regional Inspector-cum-Facilitator, and
subject to such conditions as may be specified therein, no timber or other combustible material shall be
used in the construction of, or in connection with, shaft lining or any room, housing, or any machinery or
apparatus belowground.
(11) Wood cuttings shall not be left in any working belowground, but shall be removed to the place
on surface specified by the manager at the end of every shift.276 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(12) No person shall light a fire or permit a fire to be lighted in any working belowground:
Provided that in the case of a mine to which regulation 153 does not apply, flame or electric
welding or repairing apparatus may be used belowground if permitted by an order in writing of the
manager and every such order shall specify the person who shall be in charge of the apparatus; and it
shall be duty of such person to bring the apparatus back to the surface when no longer required
belowground:
Provided further that in the case of a mine, where the provisions of regulation 153 apply, a flame
or electric welding or repairing apparatus may be used belowground if prior permission in writing has
been obtained from the Regional Inspector-cum-Facilitator and subject to such conditions as may be
specified therein.
(13) No person shall leave a portable light or lamp belowground unless person has placed it in charge
of some other person remaining therein.
(14) At the end of a shift, unless the mine is worked by a continuous succession of shifts, after all
persons have left the mine, all lights shall be extinguished and all power cut off:
Provided that nothing in this sub-regulation shall be deemed to prohibit the running of a
mechanical ventilator or auxiliary fan belowground after the shift is over.
(15) Provision shall be made to prevent an outbreak of fire or spontaneous heating belowground or
the spread of fire to the mine from any adjoining mine; and adequate steps shall be taken to control or
isolate any such fire or heating that may occur:
Provided that where in the opinion of the Regional Inspector-cum-Facilitator the provisions of this
sub-regulation have not been complied with or the steps so taken are inadequate, he or she may, by an
order in writing, require such additional precautions or steps to be taken within such time as may be
specified therein ; and if any such order is not complied with within the specified period, the Regional
Inspector-cum-Facilitator may prohibit until the order has been complied with, the employment in the
mine or part, of any person whose employment is not, in his or her opinion, necessary for the purpose
of complying with the order.
(16) Adequate and sufficient arrangements shall be made in every mine for early detection, control
and extinguishing any fire.
(17) The owner, agent and manager of every mine shall take measures and precautions appropriate
to the nature of a mine operation to prevent, detect and combat the start and spread of mine fires.
(18) A competent person shall, once at least in every seven days, inspect the top of all entrances to a
mine, all opencast working in order to ascertain whether the precaution laid down under the regulation
have been complied with, and for the presence of any fire that may have broken out or any indications
thereof.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 277
(19) A record of every inspection made under sub-regulation (18) shall be maintained in a bound
paged book kept for the purpose or in retrievable and non-editable electronic form, duly signed or e-
signed and dated by the person making the inspection.
127. Precautions after a fire has broken out. - (1) On the appearance in any part of a mine, of
smoke or other signs indicating that a fire or spontaneous heating has or may have broken out, effective
steps shall be taken, without delay, to deal with the fire or heating and all persons other than those
whose presence in the mine is deemed necessary for dealing with the fire or heating shall be
immediately withdrawn from the mine.
(2) No person, other than those required for dealing with or sealing off the fire or heating referred
to in sub-regulation (1), shall be admitted in the mine until the fire or heating has been extinguished or
effectively sealed off and an examination has been made by the manager or by the assistant manager
and the mine has been declared to be safe and a report of every such examination shall be recorded in a
bound paged book kept for the purpose or in retrievable and non-editable electronic form and shall be
signed or e-signed and dated by the person making the examination:
Provided that the Regional Inspector-cum-Facilitator may, by an order in writing and subject to
such conditions as may be specified therein, permit the employment in the mine, of persons other than
those required to deal with the fire or heating.
(3) The examination required under sub-regulation (2), shall be made with instrument approved by
the Chief Inspector-cum-Facilitator for detecting carbon monoxide and inflammable gasses.
(4) During the whole time that any work of dealing with or sealing off a fire or heating is in
progress,
(a) a competent person shall be present on the spot throughout;
(b) adequate precautions shall be taken to prevent danger to persons from any noxious,
asphyxiating or inflammable gases, flame, steam and ejected or rolling down hot material,
explosion of water gas, and falling into crevices, pot holes, that may occur in the area on
fire;
(c) there shall be kept available, at or near all places belowground-
(i) adequate number of self-rescuers and at least two tube apparatus or other suitable
apparatus, for use in emergency;
(ii) multigas detector for detecting carbon monoxide, inflammable gases, Oxygen
deficiency and noxious gases approved by the Chief Inspector-cum-Facilitator; and
(iii) adequate number of appropriate fire extinguishers shall be provided.
(5) The manager of every mine shall prepare and establish a detailed scheme for-
(a) the provision and maintenance of suitable firefighting arrangements;278 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) the prevention, detection, dealing and control of any heating, smoke or fire;
(c) the examination and maintenance of the protective measures taken to control or isolate a
fire or heating;
(d) ensuring safety of persons engaged in the said operations; and
(e) the scheme shall be suitably modified and kept updated as the situation warrants.
128. Equipment for firefighting. - (1) In every mine-
(a) unless exempted by the Regional Inspector-cum-Facilitator, adequate quantity of water at
sufficient pressure shall be provided by the agent or manager to all working places
belowground and all other places of fire risk, for the purpose of efficient firefighting;
(b) fire stations with suitable supply of firefighting equipment shall be established and kept
maintained at convenient points, both on surface and belowground;
(c) sufficient supply of sand or incombustible material and suitable portable fire extinguishers in
sufficient quantity or automatically operated fire suppression devices shall be provided at-
(i) every entrance to a mine or district and at every landing and the bottom of every
shaft or winze in use;
(ii) every place where timber, grease, oil or other inflammable material is stored;
(iii) every engine room, diesel engine maintenance workshop, filling station, storage
battery charging station;
(iv) on every track-mounted and trackless locomotive, self-propelled man riding car and
personnel carrier;
(v) each permanent and temporary electrical installation;
(vi) at locations where welding, cutting or soldering with arc or flame is being done;
(vii) every machinery, plant and installations; and
(viii) such other special places of fire risk as may be specified by the manager;
(d) every heavy earth moving machinery used in opencast workings shall be provided with
automatically operated fire detection and suppression device or system:
Provided that in case of trucks, tippers and dumpers of less than 35 tonne capacity used in
opencast mines, it may be sufficient if semi-automatic type fire suppression system has been provided;
(e) specially designed water foam spray, deluge systems or dry chemicals shall be installed
above each belt drive, belt take up, electrical control, gear reducing unit and other strategic
locations on the conveyor belt system;
(f) Suitable fire detection system shall be installed along the length of conveyor belt.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 279
(g) adequate number of suitable fire extinguishers or automatically operated fire suppression
devices shall be provided on loading and transporting machines, roof bolting machines,
drilling machineries, passenger carrier.
(2) Soda-acid type extinguishers or water shall not be used for fighting oil or electrical fires.
(3) Foam type extinguishers shall not be used for fighting electrical fires.
(4) Fire-extinguishers containing chemicals which are liable, when operated, to give off poisonous or
noxious gases shall not be provided or used belowground:
Provided that nothing in sub-regulations (2), (3) or (4) shall prohibit the use belowground fire-
extinguishers giving off carbon dioxide when operated.
(5) All types of firefighting and fire suppression systems including automatic fire detection and
suppression systems to be used in machinery and plant including heavy earth moving machineries,
materials and chemicals to be used in fire sealing, fighting or suppression systems in mines both on
surface as well as belowground shall be of such type and standard as approved by the Chief Inspector-
cum-Facilitator by a general or special order.
(6) A competent person shall, once at least in every month, examine all the equipment, material
and arrangements provided for firefighting and shall discharge and re-fill the fire-extinguishers as often
as may be necessary to ensure that these are in proper working order and any deficiency found during
any such examination or otherwise shall be immediately remedied.
(7) A report of every examination made under sub-regulation(6) shall be made in a bound-paged
book kept for the purpose or in retrievable and non-editable electronic form, duly signed or e-signed as
the case may be and dated by the person making the examination.
129. Organisation for firefighting. - (1) The owner, agent and manager of every mine shall establish
a proper organisation for firefighting in the mine by installing fire stations at surface and also on every
main haulage roadway belowground at suitable places in the intake airway near the main shaft with
adequate firefighting equipment kept in every such fire station.
(2) Sufficient number of plans shall be prepared showing the firefighting equipment including the
water mains, taps, fire-stations, pumping stations, ventilation system and escape route along with
containing such other information as may be useful for the purpose of fighting fires, and up-to-date
copies of these plans shall be kept available at suitable places both on the surface and belowground.
(3) Adequate number of persons, including all operators of plants, machinery and heavy earth
moving machineries, shall be trained in the use of fire-extinguishers, fire hydrant system and in
firefighting and such persons shall be made familiar with the position of all firefighting equipment
provided in the mine in general and near their places of work in particular.280 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) The manager of every mine shall frame standard operating procedure containing the procedures
that may be adopted in giving warnings of fire, timely withdrawal of personnel from the mine and for the
conduct of firefighting operation.
130. Apparatus for testing for carbon monoxide, nitrous fumes and other noxious gases. –
In every belowground mine there shall be kept at the mine, constantly available for use suitable type of
apparatus approved by the Chief Inspector-cum-Facilitator for detecting carbon monoxide, nitrous fumes
and other noxious gases.
131. Precautions when a fire exists belowground. - (1) In every mine in which a fire or
spontaneous heating exists in working belowground (whether such fire has been isolated by means of
suitable seals or not), no work whatsoever shall be done in any part or section adjacent to the part or
section on fire or believed to be on fire, except with the permission in writing of the Chief Inspector-
cum-Facilitator and subject to such conditions as may be specified therein.
(2) In every mine to which sub-regulation (1) and regulation 153 apply, arrangements shall be
made, once at least in every thirty days, to ascertain the atmospheric conditions behind the seals of an
area of old working or a fire or spontaneous heating unless such seals are capable of resisting the force
of an explosion:
Provided that the Chief Inspector-cum-Facilitator may, by an order in writing and subject to such
conditions as may be specified therein, exempt any mine or part thereof from the operation of this sub-
regulation where in his or her opinion special difficulties exist which make compliance with provisions
thereof not reasonably practicable.
(3) Every seal erected to isolate or control a fire or spontaneous heating belowground shall be
numbered, and shall be of adequate strength and shall be so maintained as to prevent any leakage of
air or gas through it and where water is likely to accumulate behind any such stopping, there shall be
provided in the stopping a suitable pipe or other device to drain away the water without permitting any
leakage of air or gas, etc.
(4) Where in any mine or part thereof the provisions of sub-regulation (3) have not been complied
with or where in the opinion of the Regional Inspector-cum-Facilitator the steps so taken are
inadequate, may give notice to the owner, agent or manager requiring him or her to take such
protective measures, within such time, as may be specified therein:
Provided that in case of non-compliance with the requirements of the notice, the Regional
Inspector-cum-Facilitator may, by an order in writing, prohibit until the requirements of the notice have
been complied with to his or her satisfaction, the employment in the mine or part, of any person whose
employment is not, in his or her opinion, necessary for the purpose of complying with the requirements
aforesaid.
(5) A competent person shall, once at least in every seven days, inspect all seals erected to isolate
or control a fire or spontaneous heating belowground and during every such inspection, he or she shall[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 281
ascertain the general condition of every seal, check it for leakage and presence of gas and ascertain the
temperature and humidity of the atmosphere outbye the seal.
(6) The competent persons shall after carrying out the inspection under sub-regulation (5) place his
or her signature, with date, on a check-board provided for the purpose at a suitable position on the seal
and which shall be maintained for a period of not less than three months and a report of every such
inspection shall also be recorded in a bound paged book kept for the purpose or in retrievable and non-
editable electronic form and shall be signed or e-signed and dated by the person making the inspection:
Provided that the Regional Inspector-cum-Facilitator may, by an order in writing, require such
inspection to be made at such shorter intervals as may be specified therein.
132. Precautions against dust. - (1) The owner, agent or manager of every mine shall take such
steps as may be necessary for minimising of emissions of dust and for the suppression of dust which
enters the air at any work place belowground or on surface and for ensuring that the exposure of
workers to respirable dust is limited to an extent that is reasonably practicable but in any case not
exceeding the limits that are harmful to the health of persons.
(2) For the purposes of this regulation, a place shall not be deemed to be in a harmless state for
person to work or pass or remain therein, if the eight hours time-weighted average concentration of
airborne respirable dust –
(a) in milligrams per cubic meter of air sampled by dust sampler of a type approved by and
determined in accordance with the procedure as specified by the Chief Inspector-cum-
Facilitator, by general or special order, exceeds five in case of manganese ore and the value
arrived at by dividing the figures of ten with the percentage of free respirable silica present
in other cases; or
(b) in case of respirable asbestos fibres, exceeds one fibre per millilitre of air sampled by an
open membrane filter and measured by a phase contrast optical microscope of a type
approved by and in accordance with the procedure as specified by the Chief Inspector-cum-
Facilitator, from time to time by general or special order.
Explanation.– For the purposes of this regulation, the term “respirable asbestos fibre” means any
fibrous form of mineral silicates of chrysolite, actionolite, amosite, anthophyllite, crocidolite,
tremolite or any admixture thereof with a length of greater than 5 micrometers and a diameter of
less than 3 micrometers and a length to – diameter ratio greater than three is to one.
(3) The owner, agent or manager of every mine shall, within three months of the coming into force
of these regulations and once at least in every three months thereafter or whenever the Regional
Inspector-cum-Facilitator so requires by an order in writing, cause the air at every work place where
airborne dust is generated, to be sampled and the concentration of respirable dust therein determined:
Provided that, if any measurement at any workplace shows the concentration in excess of fifty
percent or seventy five percent of the allowable concentration as specified in sub-regulation (2)282 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(hereinafter referred to as ‘permissible limit’), the subsequent measurements shall be carried on at
intervals not exceeding two months or one month respectively;
Provided further that, such measurements shall also be made immediately upon the
commissioning of any plant, equipment or machinery or upon the introduction of any new work practice
or upon any alteration therein that is likely to bring about any substantial change in the level of airborne
respirable dust.
(4) The samples drawn under sub-regulation (3) shall as far as practicable, be representative of the
levels of dust exposure of work-persons and for this purpose, the sampler shall be positioned on the
return side of the point of dust generation and within one meter of the normal working position of but
not behind the operator or other worker whose exposure is deemed to be maximum in his or her
working group.
(5) Based on the results of static or personal sampling, the representative dust exposure profiles for
different categories of workers shall be estimated by “portal to portal monitoring” of selected workers
whose exposure is deemed to be representative of their working groups.
(6) Samples shall be taken by a person who has been specially trained for the purpose in the
sampling equipment and accessories that have been checked to ensure correct maintenance and
efficient operation thereof and examined, tested and calibrated on a date which is not earlier than one
year:
(7) Respirable dust content of the samples and in case of samples collected from a working, silica
content shall be determined at a laboratory approved by the Chief Inspector-cum-Facilitator in that
behalf.
(8) All result of measurements of airborne respirable dust and all other relevant particulars shall be
systematically recorded within fourteen days of the date of collection of samples, in a bound paged book
kept for the purpose or in retrievable and non-editable electronic form and every entry in the book
aforesaid shall be countersigned or e-signed and dated by the manager within twenty four hours.
(9) When the dust monitoring results have established that the permissible limit of dust
concentrations are exceeded at any place, immediate steps shall be taken to minimise the emission of
dust and to notify the Regional Inspector-cum-Facilitator.
(10) If the average concentration of respirable dust in a series of five samples taken in seven
successive normal working shifts during the subsequent month exceeds one and a half times the
“permissible limits” the relevant operation or operations causing excessive dust shall cease.
(11) The operation or operations shall not be resumed or allowed to be carried on until improvements
have been made in the prevention and suppression of dust and fresh sampling carried out immediately
on resumption of the said operation or operations has established that such improvements have reduced
the dust concentration below the permissible limit:[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 283
Provided that if the dust prevention and suppression device of any machinery or equipment fails
to operate efficiently the operation of the said machinery or equipment shall likewise cease and shall not
be resumed until the defect therein has been rectified:
Provided further that, purely as a contingency measure or as a secondary means of protection in a
work situation wherein it is technically not feasible to reduce the respirable dust concentration below the
permissible limit or during the time period necessary to install and commission any device or to institute
any new work practice for dust prevention or suppression, compliance with the permissible limit of dust
may be achieved by remote operation or by job rotation and failing which by the use of suitable dust
respirator.
(12) The owner, agent or manager of every mine where need of dust respirators might arise, shall
provide dust respirators in sufficient number and at no cost to the concerned work persons for their use;
for the dust respirators to be regularly cleaned, disinfected and maintained in efficient working order,
and for the proper fitting of and for thorough training of the concerned workers in the need for and
correct use of respirators.
(13) To prevent the liberation and accumulation of dust and the propagation of airborne dust, the
following provisions shall have effect, namely:-
(a) dust shall be suppressed as close as possible to its source of formation;
(b) during any operation of drilling or boring on surface or belowground,-
(i) the production of dust shall be reduced by using bits which are sharp and of proper
shape, by keeping suitable pressure on the bits and by keeping the holes clear of the
cuttings; and
(ii) except in naturally wet ground, a jet of water shall be directed on to the cutting edge
to wet the cuttings or other equally efficient device, approved by the Chief Inspector-
cum-Facilitator, shall be provided and kept in operation throughout the drilling or
boring operation to prevent the atmosphere being charged with dust and where
pneumatic drilling is performed, water shall be turned on before turning on
compressed air to the drill:
Provided that where drilling is done by hand, it shall be sufficient if holes are kept constantly moist
during such drilling;
(c) every roadway on surface or belowground where mobile mining machinery ply, shall be
regularly wetted and or shall be effectively treated with some other equally efficient dust
suppressant agent to reduce dust being raised in the atmosphere to a minimum;
(d) no plant for the screening or sorting of mineral and as far as practicable, no heap of cinder,
cement, sand, mortar or other dry and fine material shall be placed within eighty meters of
the top of down-cast shaft or intake airway nor shall any such material be so handled as to
make it air-borne and drawn into such shaft or such airway;284 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(e) In every working belowground,–
(i) no machinery or equipment which is likely to emit dust in excess of permissible limit
shall be operated unless it is equipped with a suitable dust-prevention and
suppression device, which shall be properly interlocked with the operating lever or
switch, and unless such device is operating efficiently;
(ii) the design, arrangement, material and condition of picks on every mechanical stone
cutter shall be such as to reduce the formation of dust to the minimum and no
mechanical stone cutter shall be operated unless suitable water sprays or jets of
water are directed on the cutting edges thereof so as to damp the cuttings as they
are formed;
(iii) every working face and the floor, roof and sides of every roadway or airway within
sixty meters thereof shall be, unless naturally wet throughout, regularly washed
down to prevent accumulation of dust and shall be kept thoroughly wet during the
work shifts;
(iv) a current of air sufficient to clear away the dust emitted by any machinery or
operation and to dilute the dust concentration below the ‘permissible limit’, shall be
maintained by means of general ventilation and if necessary, by local ventilation, so
however that, as far as practicable, the velocity of air in any roadway or workplace
shall not be such as to raise dust in the atmosphere;
(v) after blasting, no person shall enter working places unless sufficient time has elapsed
for dust, smoke and fumes to be cleared by a current of air and the broken material
shall not be moved unless it has been thoroughly made wet with water;
(vi) vehicles, tubs and conveyors used for transport of mineral, ore or waste shall be
maintained in good condition so as to minimise spillage or leakage and chutes, spiral
conveyors, bins, tipplers, conveyor discharge points and skip loading and unloading
installations shall be so controlled as to reduce the formation of dust to the
minimum; and such material shall also be kept thoroughly wet with water unless it is
already wet or other effective means of dust suppression are used; and
(vii) unless, owing to special difficulties, exempted in writing by Regional Inspector-cum-
Facilitator in that behalf and subject to such conditions as may be specified therein,
water in pipes in sufficient quantity and under adequate pressure and independent of
any pumping system, shall be provided and maintained so as to get maximum
efficiency in allaying of dust;
(f) no process of crushing, breaking, disintegrating, dressing, sorting, grinding, screening or
sieving of mineral or ore or any operation incidental thereto, shall be carried out at any
mine unless sufficient watering or other appropriate and effective dust control measures,[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 285
such as, but not limited to isolation, enclosure, exhaust ventilation and dust collection are
designed, provided, maintained and used;
(g) the exhausted air, belowground, which contains dust in excess of the permissible limit shall
be efficiently diluted and if necessary filtered so as to reduce the concentration of respirable
dust therein below ten percent of the ‘permissible limit’ before being re-circulated into
working places; and
(h) every device used for the prevention and suppression of dust produced by any machinery,
equipment or process as also for the filtering of the exhausted air and every dust respirator
shall be inspected once at least in every seven days and shall be thoroughly examined and
tested at least once in every month and the results of every such inspection, examination
and test shall be recorded in the register maintained under sub-regulation (8).
(14) The owner, agent or manager of every asbestos mine where mining operations are carried on
and ‘permissible limit’ of dust concentration is exceeded, shall also –
(a) Provide –
(i) sufficient protective clothing in good condition for use of, at no cost to the persons
employed in such operations as well as arrangements for proper dusting by means of
a vacuum cleaner and for regular washing thereof;
(ii) suitable place for putting on and taking off the protective clothing;
(iii) well maintained washing and bathing places;
(iv) separate, clean and hygienic place for storing and changing personal clothing;
(b) (i) sorting, separation, grading, mixing, compression and packing of asbestos fibres and
collection and disposal of waste including filtered dust to be carried out in such a
manner that asbestos dust does not escape into air;
(ii) all machinery, plant, work premises and all internal surfaces of the building where
milling operations are carried on to be maintained in clean state and free of asbestos
waste. Such cleaning shall be carried out by means of a vacuum cleaner or by some
suitable exhaust draught and persons undertaking these operations or present
thereat shall be provided with and wear appropriate respiratory equipment and
protective clothing;
(iii) asbestos fibres to be packed in impermeable bags;
(iv) cautionary notices, in language or languages understood by the majority of work
persons with standard warning symbol to be prominently displayed at every such
place were milling of asbestos is carried on and where the ‘permissible limit’ of dust
exposure is likely to be exceeded, to warn the persons as to the hazards to health
from asbestos dust, as to the need for the use of protective clothing or use of
appropriate dust respiratory by persons entering therein and as to the synergistic286 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
effect on the hazards of smoking cigarettes, beedis, cigars etc., and occupational
exposure to asbestos dust.
(15) The manager of every mine where airborne dust is generated shall formulate and implement a
scheme specifying –
(a) the location, frequency, timing, duration and pattern of sampling;
(b) the instruments and accessories to be used for sampling;
(c) the laboratory at which respirable dust content of samples and silica content shall be
determined;
(d) the format in which the results of measurements of dust concentration and other particulars
are to be recorded;
(e) the organisation for dust monitoring and for the examination and maintenance of dust
prevention and suppression measures and dust respirators; and
(f) the manner of making all persons concerned with the implementation of the dust control
measures fully conversant with the nature of work to be performed by each in that behalf.
(16) The Regional Inspector-cum-Facilitator may, where special conditions exist, permit or require by
an order in writing and subject to such conditions as may be specified therein, any variation in the
foregoing provisions or in the manager’s scheme made under sub-regulation (15).
(17) If any doubt arises as to any matter referred to in this regulation, it shall be referred to the Chief
Inspector-cum-Facilitator for decision, which will be final and binding.
133. Precautions against eruption of gas. - Where any working is extended to within thirty meters
of any stoped-out area or disused working containing or likely to contain an accumulation of inflammable
or noxious gases, there shall be maintained at least one bore-hole not less than 1.5 meters deep in
advance of the working and the operation of drilling the bore hole shall be carried out under the
supervision of a competent person, and where inflammable gas is present or likely to be present, no
lamp or light other than an approved safety lamp or torch or digital gas detectors shall be used in any
such working.
134. Recovery and exploratory work. - (1) After an explosion of inflammable gas has occurred in a
mine, only such persons as are authorised by the manager or by the principal official present at the
surface, shall be allowed to enter the mine.
(2) When it is intended or proposed to reopen a mine or part thereof, which has been isolated,
sealed off or flooded with water to deal with a fire or spontaneous heating, the owner, agent or
manager shall not less than thirty days before the commencement of such work, give notice in writing of
such intention or proposal to the Regional Inspector-cum-Facilitator and the Chief Inspector-cum-
Facilitator.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 287
(3) Where it is intended to carry out any exploratory work in a mine or part belowground likely to
contain irrespirable atmosphere,–
(a) all work shall be done under rescue cover only;
(b) no party of less than three persons shall be allowed to proceed to carry out such work; and
(c) every such party shall carry a suitable apparatus approved by the Chief Inspector-cum-
Facilitator for detecting carbon monoxide gas and also an approved flame safety lamp.
135. Danger from surface water. – (1) Where any mine or part thereof is so situated that there is
any danger of inrush of surface water into the mine or part, adequate protection against such inrush
shall be provided and maintained, and whether such protection is adequate or not may be determined
by the Chief Inspector-cum-Facilitator, whose decision shall be final.
(2) Except with the previous permission in writing of the Chief Inspector-cum-Facilitator and subject
to such conditions as may be specified therein and subject to the provisions of sub-regulation (1), every
entrance into a mine shall be so designed, constructed and maintained that its lowest point (which
means the point at which a body of rising water on surface can enter the mine) shall be not less than
1.5 meters above the highest flood level at that point.
(3) Every year, during the rains constant watch shall be kept on the flood levels on the surface of
the mine and if at any time the levels cross the highest levels earlier recorded, such levels shall be
marked by permanent posts along the edges of water and the new highest levels thus observed shall be
recorded with the date as the highest flood level on the plans by an actual survey:
Provided that the highest flood level shall not be plotted on plans by interpolations.
(4) If there are water dams or reservoirs built across rivers and water courses on the upstream side
of the mine, arrangements shall be made for communication between appropriate authorities for the
purpose of ascertaining the quantity and timing of water released from the dams which is likely to
endanger safety of the mine and arrangement for similar communication shall be made when water level
rises on the upstream side which is likely to endanger any mine.
(5) In every mine which is likely to be endangered by surface water, the highest flood levels and
danger levels at least 1.2 meters or as required by the Regional Inspector-cum-Facilitator, below the
highest flood level, shall be permanently marked at appropriate places on the surface and whenever
water rises towards the danger level at any place, all persons shall be withdrawn from the mine
sufficiently in advance and for this purpose adequate arrangements of quick communication to all parts
of the mine by effective systems shall be provided and maintained.
(6) No working shall be made in any mine vertically below-
(a) any part of any river, canal, lake, tank or other surface reservoir; or
(b) any spot lying within a horizontal distance of 15 meters from either bank of a river or canal
or from the boundary of a lake, tank or other surface reservoir;
except with the previous permission in writing of the Chief Inspector-cum-Facilitator and subject to such
conditions as may be specified therein.288 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(7) Every application for permission under sub-regulation (6) shall be accompanied by two copies of
a plan and section showing the existing position of the workings of the mine, the proposed layout of
workings, the depth of the workings from the surface, the position and depth of any goaves in every
seam in the neighborhood, all faults, dykes and other geological disturbances and such other particulars
as may affect the safety of the mine or of the persons employed therein.
Explanation.– Where sand or alluvium are lying in the course of a river, canal, lake, tank or reservoir,
the depth from the surface shall be reckoned from the surface of hard ground underlying such sand or
alluvium.
(8) All workings made under sub-regulation (6) shall be clearly demarcated belowground.
(9) A competent person shall, once at least in every fourteen days during the rainy season and once
at least in every thirty days during other periods of the year, examine every protective measure provided
under sub-regulations (1), (2), (3), (4) and (5), whether in use or not, for their stability, and a report of
every such examination shall be recorded in a bound paged book kept for the purpose or in retrievable
and non-editable electronic form, which shall be signed or e-signed and dated by the person making the
examination and countersigned or e-signed and dated by the manager.
(10) The protective measures and workings shall also be inspected, once at least in every quarter by
the manager personally.
136. Danger from underground inundation. - (1) Proper provision shall be made in every mine to
prevent irruption of water or other liquid matter or any material that is likely to flow when wet from the
workings of the same mine or of an adjoining mine.
(2) No working which has approached within a distance of 60 meters of any disused or abandoned
workings (not being workings which have been physically examined and found to be free from
accumulation of water or other liquid matter or any material that is likely to flow when wet), whether in
the same mine or in an adjoining mine, shall be extended further except with the prior permission in
writing of the Chief Inspector-cum-Facilitator and subject to such conditions as may be specified therein:
Provided that if any heavy seepage of water is noticed in any working approaching but not
within 60 meters of any such disused or abandoned working, such working shall be immediately
stopped, and the Chief Inspector-cum-Facilitator and the Regional Inspector-cum-Facilitator shall
forthwith be informed about the occurrence. The working shall not be extended further except with the
prior permission in writing of the Chief Inspector-cum-Facilitator and subject to such conditions as may
be specified therein.
Explanation- For the purposes of this sub-regulation, the distance between the said workings shall
mean the shortest distance between the said workings measured in any direction whether horizontal,
vertical or inclined.
(3) (a) Every application for permission to extend any workings referred to in sub-regulation (2)
shall be accompanied by two copies of the plan and section showing the outline of such[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 289
disused or abandoned workings in relation to the workings which are approaching the said
workings, and such other information as may be available in respect of the said workings.
(b) Except where otherwise permitted by the Chief Inspector-cum-Facilitator by an order in
writing and subject to such conditions as may be specified therein, no such workings shall
exceed two meters in width or height; and there shall be maintained at least one borehole
near the centre of the working face, and sufficient flank holes on each side and where
necessary, bore-holes above and below the workings, at intervals of not more than five
meters.
(c) All such bore-holes referred under clause (b) shall be constantly maintained, at sufficient
distance in advance of the workings; and such distance shall in no case be less than three
meters.
(d) The precautions under this regulation shall be carried out under the direct supervision of a
competent person specially authorised for the purpose.
(4) The precautions laid down in clause (b), (c) and (d) of sub-regulation (3) shall also be observed
in any other working where any heavy seepage of water is noticed whether approaching disused or
abandoned workings or not.
137. Intentional flooding. - (1) When the owner, agent or manager intends or proposes, by
introducing water from the surface or from any other part of the mine or from an adjacent mine, to
flood any part of the workings of his or her mine, he or she shall give, in writing, not less than fourteen
days notice of such intention or proposal to the Chief Inspector-cum-Facilitator and the Regional
Inspector-cum-Facilitator and to the management of all adjoining mines and of such other mines as
might be affected by such flooding:
Provided that the Regional Inspector-cum-Facilitator may, by an order in writing and subject to
such conditions as may be specified therein, permit such operations to be commenced on any day prior
to the expiry of the said notice period of fourteen days:
Provided further that the Regional Inspector-cum-Facilitator may, by an order in writing, either
prohibit any such operation or require that such operation shall not be commenced until such
precautions as may be specified therein, have been taken to his or her satisfaction.
(2) If the operations in respect of which notice is given under sub-regulation (1), are not
commenced within sixty days from the expiry of the said notice period of fourteen days, the notice shall
be deemed to have lapsed and the provision of the sub-regulation (1) shall apply as if no such notice
had been given.
138. Construction of reservoir, water dam, etc. - (1) Where in any mine, it is intended to construct
a reservoir, dam or other structure to withstand a pressure of water or other material which will flow290 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
when wet, or to control an inrush of water the owner, agent or manager shall give in writing not less
than fourteen days notice of such intention to the Regional Inspector-cum-Facilitator, which shall be
accompanied by two copies of plans and sections showing the design and other details of the proposed
construction:
Provided that where the safety of the mine or of the persons employed therein is seriously
threatened, the provisions of this regulation shall be deemed to have been complied with if the said
notice is given to the Regional Inspector-cum-Facilitator as soon as the work of construction is
commenced.
(2) The Regional Inspector-cum-Facilitator may, by an order in writing, require such modification or
alternations to be made in the design of any such reservoir, dam or structure, as may be specified
therein.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 291
CHAPTER- XI
VENTILATION
139. Standard of ventilation. - (1) It shall be the duty of the owner, agent or manager of every mine
to take such steps as are necessary to constantly provide in all parts of the mine belowground which are
not sealed off, adequate ventilation to clear away smoke, steam and dust, to dilute gases that are
inflammable or noxious so as to render them harmless, to provide air containing sufficient oxygen and to
prevent such excessive rise of temperature or humidity which may be harmful to the health of persons.
(2) For the purpose of securing adequate ventilation as specified in sub-regulation (1), the owner,
agent and manager shall ensure that-
(a) at every place in the mine where persons are required to work or pass, the air does not
contain less than 19 percent of oxygen or more than 0.5 percent of carbon dioxide or any
noxious gas in quantity likely to affect the health of any person;
(b) the percentage of inflammable gas does not exceed 0.75 in the general body of the return
air of any ventilating district and 1.25 in any place in the mine;
(c) the percentage of other toxic or noxious gases that may likely to affect the health of persons
employed in mines does not exceed the limit as specified by the Chief Inspector-cum-
facilitator by general order.
(d) the wet bulb temperature in any working place does not exceed 33.5 degrees centigrade,
and where the wet bulb temperature exceeds 30.5 degrees centigrade, arrangements shall
be made to ventilate the same with a current of air moving at a speed of not less than one
meter per second; and
(e) for ensuring compliance with the provisions of clauses (a), (b) and (c) of this sub-
regulation, air samples and temperature readings shall be taken at least once in thirty days
and the result shall be recorded in a bound paged book kept for the purpose or in
retrievable and non-editable electronic form:
Provided that at any mine or part, where special conditions exist, the Chief Inspector-cum-
Facilitator may, by an order in writing and subject to such conditions as may be specified therein,
approve a ventilation scheme in variance with the aforesaid provisions:
(3) Where diesel equipment is used in belowground, a miner’s personal exposure to diesel particulate
matter (DPM) shall not exceed an eight-hour time weighted average (TWA) air borne concentration of
100 micrograms of Elemental Carbon per cubic meter of air (100ECµg/m3). The airborne concentration
of DPM shall not exceed 3 times the TWA value (i.e. 300ECµg/m3) for more than 30 minutes and shall
never exceed 5 times the TWA value (i.e. 500ECµg/m3) at any place in belowground mine.292 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Provided further that for a mine or type of mines, using such equipment which emit toxic gases or
matters into the mine air, such as diesel operated or battery operated equipment etc., the Chief
Inspector-cum-Facilitator may prescribe ventilation standards in variance with the above provisions.
(3) In every mine, ventilation as specified in sub-regulation (2) shall be produced by a suitable
mechanical ventilator.
(4) If with respect to any mine or part thereof the Regional Inspector-cum-Facilitator is of the
opinion that the ventilation is not adequate, he or she may, by an order in writing, require the
installation and maintenance of such a mechanical ventilator as is capable of producing adequate
ventilation in the mine or part thereof.
140. Main Mechanical ventilator, its drive and fittings. - (1) Every main mechanical ventilator in a
mine shall be capable of producing adequate ventilation in the mine or part thereof, and shall be
installed on the surface at a safe distance from the opening of the shaft, incline or winze.
(2) In every mine to which regulation 153 applies, if electricity is used for driving the mechanical
ventilator, electrical energy shall be supplied to the drive motor of the ventilator through a separate and
independent power generating source.
(3) There shall be provided and maintained at every main mechanical ventilator, a recording
instruments to continuously register the pressure developed, speed of the ventilator and motor
temperature.
(4) Every main mechanical ventilator shall be so designed, installed and maintained that the current
of air can be reversed when necessary.
(5) At every shaft, winze ordinarily used for lowering or raising of persons or materials where a
mechanical ventilator is installed, there shall be provided a properly constructed air lock.
(6) Every mechanical ventilator shall be placed under the charge of a competent person appointed
for the purpose, who shall not be entrusted with any other additional duties which may require the
person to go outside the fan house or which may interfere with the duties as in-charge of the
mechanical ventilator.
(7) In every mine in which a mechanical ventilator is in use, the quantity of air circulating in every
ventilating district shall be measured once at least in every 30 days and recorded in a bound paged book
kept for the purpose or in retrievable and non-editable electronic form.
141. Installation and maintenance of mechanical ventilators. - (1) In every mine to which
regulation 153 applies, where a booster or auxiliary fan is electrically driven, the drive motor, unless it is
so constructed, installed, operated and maintained as to prevent the risk of open sparking, shall not be
placed in a return airway.
(2) The installation and maintenance of every mechanical ventilator and booster fan shall be
supervised and controlled by a competent person appointed for the purpose.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 293
(3) A competent person appointed for maintenance of mechanical ventilator and booster fan shall
once at least in every seven days, examine every mechanical ventilator and booster fan in use and shall
record the results of such examination in a bound paged book kept for the purpose or in retrievable and
non-editable electronic form and any defect revealed by such examination shall without delay be
brought to the notice of the manager.
(4) Except in an emergency, no person shall start, stop, restart, remove or in any way alter, repair
or interfere with any ventilator or booster fan, except by or on the written authority of the manager or
other official authorised in writing in this behalf.
(5) The written authority referred to under sub-regulation (4) shall clearly specify the conditions
under which a ventilator or booster fan shall be started, stopped or restarted, the period for which it can
be stopped and the procedure for removal, repair, alterations or interference with such fans.
(6) Particulars of every alteration and every stoppage, including any stoppage beyond control,
together with the duration thereof shall be recorded by the competent person appointed under sub-
regulation (3), in a bound paged book kept for the purpose or in retrievable and non-editable electronic
form:
Provided that, whenever a mechanical ventilator or a booster fan has been stopped for any reason
whatsoever, the competent person shall immediately record the time of stoppage in the aforesaid book
or in retrievable and non-editable electronic form and send it to the manager or the person authorised in
this behalf for his or her appraisal and the manager, or the person authorised, as the case may be, shall
sign or e-sign the entry with date in the bound paged book or in retrievable and non-editable electronic
form, in respect of the stoppage:
Provided further that when the stoppage of mechanical ventilator or a booster fan has been
brought to the notice of the official, other than the manager or person authorised in this behalf, the said
official shall immediately inform the fact in writing to the manager or in his or her absence, to any
person authorised in this behalf or the official superior to the manager, about such stoppage and the
manager or such person or superior official, as the case may be, shall acknowledge in writing the receipt
of such information sent to him or her and shall, without prejudice to the standing order under
regulation 142, take such action as may be expedient for the safety of persons employed in the mine
and the details of every action thus taken by authorised person shall be recorded in the aforesaid book
or electronic form.
(7) The manager or the person authorised or the senior official, referred to in sub-regulation (6), on
being informed or coming to know of the stoppage of a mechanical ventilator or a booster fan, shall
decide about disconnecting electric supply to the mine and the extent of such disconnection and the
details of such disconnection shall be entered in the bound paged book kept for the purpose or in
retrievable and non-editable electronic form:
Provided that in the case of stoppage of the mechanical ventilator or the booster fan, the electrical
supply or the other source of drive to any auxiliary fan, if installed, shall be disconnected immediately by
an arrangement of sequence control, or other effective arrangement.294 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(8) (a) In every mine in which a mechanical ventilator is in use, the quantity of air shall, once at
least in every fourteen days in case of mine to which regulation 153 applies, and in other
cases in every thirty days, be measured –
(i) in every main intake and return airway of every level or section, as near as practicable to the
entrance to the mine;
(ii) in every split, as near as practicable to the point at which the split commences;
(iii) in every ventilating district, as near as practicable to the point where the air is
subdivided at the end of a split and also where it enters the first working place; and
(iv) any other point that the Regional Inspector-cum-Facilitator may, by an order in
writing, specify.
(b) The measurements referred to in clause (a) shall be entered in a bound paged book kept
for the purpose or in retrievable and non-editable electronic form.
(9) The measurements referred to in sub-regulation (8) shall also be taken and recorded whenever
the system of ventilation is so altered as to substantially affect or likely to affect the ventilation of the
mine.
(10) Every such ventilator or fan shall be in charge of a competent person appointed for the purpose,
who shall not be entrusted with any other additional duties which may interfere with his or her duties as
in-charge of the ventilator or fan, as the case may be.
142. Standing orders. - (1) The manager of every mine in which a mechanical ventilator other than
an auxiliary fan is installed shall submit, within a period of thirty days of the installation to the Regional
Inspector-cum-Facilitator, standing orders specifying the action that shall be taken with respect to the
withdrawal of persons from the mine or part thereof in the event of a stoppage of the ventilator.
(2) The Regional Inspector-cum-Facilitator may, by an order in writing, approve the standing orders
referred to in sub-regulation (1), either in the form submitted to him or her with such additions and
alterations as he or she may think fit and the standing orders so approved shall be enforced at the mine.
(3) A copy of the standing orders in English and other local language understood by majority of the
persons employed in the mine shall be displayed at conspicuous places in the mine, both above and
belowground.
143. Splits and airway. - (1) For the purposes of ventilation, every mine shall be divided into such
number of districts or splits as to ensure that separate current of fresh air is made available in every
such district or split.
(2) The intake air shall be so arranged as to travel away from all stagnant water.
(3) Every connection between a main intake airway and a main return airway shall until it is no
more required and has been sealed off, be provided with at least two doors so spaced that whenever[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 295
one door is opened, the other door can be kept closed and steps shall be taken to ensure that at least
one of the doors is always closed:
Provided that any such connection which is no more required, shall be effectively sealed.
144. Brattices, doors, stopping’s and air crossings. - (1) There shall be provided and maintained
in every mine such number of air crossings, stoppings, doors, brattices and other devices as may be
adequate to ensure compliance with the provision of regulation 139.
(2) In case of any doubt as to the adequacy of such ventilation devices, it shall be referred to
the Chief Inspector-cum-Facilitator for decision, which will be final.
(3) The space between the frame of every ventilation door and the roof and sides of the roadway
shall be built up with masonry or concrete, not less than 25 centimeters in thickness.
(4) Every ventilation door shall be self-closing and whenever opened, it shall be closed as soon as
possible, and shall not be propped or fixed so as to remain open.
(5) If the ventilation door is required to be frequently kept open for the passage of men or material,
there shall be, throughout every working shift, a door attendant at the door.
Provided that where ventilation door is operated automatically, the door attendant shall not be deployed.
(6) If a door is not in use, it shall be taken off its hinges and placed in such position that it shall not
cause any obstruction to the air current.
(7) Every stopping between the main intake and main return airways shall be constructed of masonry or
brickwork or of concrete without reinforcement, not less than 25 centimeters in thickness, and if
constructed of properly reinforced concrete, not less than 15 centimeters thickness or such greater
thickness as may be required by the Regional Inspector-cum-Facilitator, and shall be faced with a
sufficient thickness of lime or cement plaster to prevent leakage of air:
Provided that under special circumstances the Chief Inspector-cum-Facilitator may permit
construction of stopping by some other suitable means, other than as mentioned above.
(8) Every stopping in use shall be kept accessible for inspection.
(9) The partitions and walls of every air-crossing shall be not less than 25 centimeters in thickness if
constructed of masonry or of concrete not properly reinforced, and not less than 15 centimeters in
thickness if constructed of properly reinforced concrete.
(10) Every air-crossing, ventilation stopping, door or brattice shall be maintained in efficient working
order and good repair.
(11) A competent person shall, once at least in every thirty days, examine every airway, air crossing,
ventilation stopping and door in use, and shall record the result thereof in a bound paged book kept for
the purpose or in retrievable and non-editable electronic form, and shall sign or e-sign the same and
date his or her signature.296 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
145. Velocity of air current. - The velocity of air current measured in meters per minute at the
immediate outbye ventilation connection from the face and at a distance of 7.5 meters outbye of the
discharge end of an air pipe shall not be less than 30 and 15 respectively:
Provided that, no diesel equipment shall be operated in any working place where velocity of air
current is less than 45 meters per minute:
Provided further that, if in the opinion of the Chief Inspector-cum-Facilitator the compliance with
the above provision is not practicable or not necessary, shall by an order in writing and subject to such
conditions as may be specified therein exempt partially or totally any mine from the provision of this
regulation.
146. Auxiliary fans. - (1) Every auxiliary fan-
a) shall be installed, located and worked in such a manner that –
(i) a sufficient quantity of air shall, at all times, reach it so as to ensure that it does not
re-circulate air; and
(ii) there is no risk of air, which it circulates, being contaminated by any substantial
quantity of inflammable or noxious gases or dust;
b) shall, whether driven electrically or otherwise, be efficiently connected with earth so as to
avoid the accumulation of an electrostatic charge; and
c) shall have an air-duct for conducting the air to or from the face or blind end, which shall be
so maintained as to minimise any leakage of air and to ensure an adequate supply of air to
within 4.5 meters of the face or blind end.
(2) No auxiliary fan shall be started, stopped, removed, replaced or in any way altered or interfered
with, except by or on the authority of an official.
(3) No person shall enter or remain in any place which is dependent for its ventilation on an
auxiliary fan, unless such fan is operating effectively:
Provided that whenever the ventilation of any such place has been interrupted, whether by the
stoppage of the fan or otherwise, no person shall so enter or remain therein, except for the purpose of
restoring the ventilation, unless the place has been examined by a competent person and declared safe.
(4) In every belowground working, conditions for installation of two or more auxiliary fans in the
same ventilating district or split shall be specified by the Chief Inspector-cum-Facilitator in a general
order.
147. Precautions against fire in ventilation appliances. - (1) Every mechanical ventilator on the
surface shall be installed in a suitable fire proof housing.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 297
(2) The covering of every shaft sealed off or covered for ventilation purposes, every fan drift, duct
or casing and every part of a mechanical ventilator or fan within such drift, duct or casing, and every air-
crossing and ventilation door shall be constructed of fire-proof material:
Provided that this regulation shall not apply to the small lid of a shaft-covering operated by the
rope cappel.
148. Ventilation plans to be brought up-to-date. - The manager shall ensure that, as soon as any
alteration is made in the ventilation of a mine involving the erection or removal of an air-crossing or
stopping or the alteration in the position or installation of a ventilator or fan belowground, the erection,
removal, alteration or installation, as the case may be, shall be shown on the ventilation plan maintained
under regulation 59.
149. Obstructions, interruptions and alterations. - (1) No material or debris shall be allowed to
accumulate in any level, drive, crosscut, roadway or any other part of the workings belowground so as
to impede the ventilation.
(2) Every roadway and working belowground which is not adequately ventilated shall be fenced or
barricaded so as to effectively prevent persons entering the same.
(3) If any person becomes aware of any obstruction in, or interference with, or deficiency of
ventilation in any mine or part thereof, person shall –
a. if it falls within his or her power to remedy such obstruction, interference or deficiency,
immediately take steps to do so; or
b. cease all work at that place, and shall forthwith inform his or her superior official of such
obstruction, interference or deficiency.
(4) Whenever there is any interruption of ventilation by the stoppage or any mechanical ventilator,
including an auxiliary fan installed belowground, the official in charge of the mine or part shall
immediately take precautionary measures including withdrawal of men, if necessary, against dangers
that may arise out of non-compliance with the provisions of regulation 139 to restore the ventilation in
the mine or part thereof.
(5) No person shall alter the general system of ventilation in any mine or part except with the
written authority of the manager:
Provided that, in case of an emergency, an official of the mine may carry out such alteration as
may deem necessary for the safety of persons, but shall as soon as possible inform the superior official
and the manager about the same in writing.
150. Precautions against gas during de-watering and re-opening. - (1) No disused working or
shaft shall be de-watered except under the constant supervision of a competent person and during such298 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
de-watering, approved safety lamps or other approved apparatus for determining presence of
inflammable or noxious gases shall be exclusively used, and there shall also be provided at every work
place where persons are deployed, at least one approved flame safety lamp or other approved
apparatus for determining presence of inflammable or noxious gases or deficiency of oxygen.
(2) The first inspection of a mine or part which is re-opened after a discontinuance of mining operations
for a period exceeding seven days and of any part of a mine after being de-watered, shall be made by a
competent person with an approved flame safety lamp or other approved apparatus for determining
presence of inflammable or noxious gases and deficiency of oxygen and during such inspection, no
additional light or lamp other than an approved electric torch or lamp shall be used.
(3) The result of every such inspection shall be recorded in a bound paged book kept for the
purpose or in retrievable and non-editable electronic form, and shall be signed or e-signed and dated by
the persons making the inspection, and countersigned or e-signed and dated by the manager.
151. Precautions against inflammable and noxious gases. - (1) For the purpose of this
regulation, inflammable gas shall be deemed to have been found or detected when it is indicated by the
lowered flame of a flame safety lamp or, where methane detectors are used, they indicate one and a
quarter percent, or more of inflammable gas.
(2) When any person detects the presence of inflammable gas, shall not brush or waft it out, but
shall immediately withdraw from the place and shall inform his or her superior official about the same.
(3) Where in any place in a mine, inflammable or noxious gas is detected,-
(a) all persons shall be withdrawn from the place;
(b) the place shall be immediately fenced off so as to prevent persons inadvertently entering
the same, and the competent person in charge shall, without delay, take steps to remove
the gas by improving the ventilation.
(4) During the removal of such gas under sub-regulation (3), all persons, except those necessary for
such removal, shall be withdrawn from the return side of the ventilating district in which the gas has
been detected unless the quantity of gas is, in the opinion of the competent persons, so small that such
withdrawal is not necessary:
Provided that where the danger arises from the presence of inflammable gas, no naked light shall
be used in the ventilating district in which the gas is detected.
(5) No person shall be re-admitted into the place where the gas was detected until an official has
examined the place and has reported that the place is free from gas.
(6) Every examination referred to in sub-regulation (5) shall be made with aflame safety lamp or a
suitable detector approved by the Chief Inspector-cum-Facilitator, and in the case of noxious gases, also
with suitable means of detecting carbon monoxide gas approved by the Chief Inspector-cum-Facilitator.
(7) Particulars of every occurrence referred to in sub-regulation (2) and of every examination made
under sub-regulation (5), together with a statement as to where and when the gas was found and when[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 299
it was removed, and in case of inflammable gas, the percentage thereof, shall be recorded in a bound
paged book kept for the purpose or in retrievable and non-editable electronic form; and every such entry
shall be signed or e-signed and dated by the competent person making the report, and countersigned or
e-signed and dated by the manager.
152. Inspection of unused working for gas. - (1) In any part of a mine where the Regional
Inspector-cum-Facilitator may require by an order in writing, all unused workings which have not been
sealed off, shall, once at least in every seven days be inspected by a competent person for the presence
of inflammable or noxious gas.
(2) A report of every inspection referred to in sub-regulation (1) shall be recorded in a bound paged
book kept for the purpose or in retrievable and non-editable electronic form and shall be signed or e-
signed and dated by the person who made the inspection.
153. Safety lamps to be used in gassy mines. - No lamp or light other than an approved safety
lamp or torch or other installation permitted under the Central Electricity Authority (Measures relating to
Safety and Electric Supply) Regulations, 2023 shall be used or permitted to be used belowground in a
mine where-
(a) in any part in which an explosion or ignition of inflammable gas has occurred;
(b) in any ventilating district in which inflammable gas has been found; and
(c) in any place in which, in the opinion of the Regional Inspector-cum-Facilitator, inflammable
gas is likely to be present in such quantities as to render the use of naked lights dangerous:
Provided that the Chief Inspector-cum-Facilitator may, by an order in writing and subject to such
conditions as may be specified therein, exempt any mine or part thereof from the operation of this
regulation on the ground that on account of its special character the use of safety lamp is not necessary
therein.
154. Contrabands. - In every mine or part to which regulation 153 applies, the following provisions
shall have effect, namely:–
(1) No person shall have in his or her possession belowground in a mine any cigar, cigarette, e-
cigarette, biri, or other smoking apparatus, or any match or mobile phone, or other apparatus of any
kind capable of producing a light, flame or spark:
Provided that nothing in this sub-regulation shall be deemed to prohibit the use belowground of
any apparatus for the purpose of shot firing, of a type approved by the Chief Inspector-cum-Facilitator.
(2) For the purpose of ascertaining whether any person proceeding belowground has in his or her
possession any article referred to in sub-regulation (1), a competent person other than the pit top
attendant, if any, shall be appointed to search every such person immediately before he enters the
mine.300 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) The competent person referred to in sub-regulation (2) shall be on duty throughout the shift,
and no duties other than those under this regulation and sub-regulation (2) of regulation 153 shall be
entrusted to him or her.
(4) The competent person so appointed shall make a thorough search for the articles referred to in
sub-regulation (1) and in particular shall –
(a) search or turn out all pockets;
(b) pass hand over all clothings; and
(c) examine any article in the possession of the person searched.
Such search shall be made every time a person proceeds belowground notwithstanding that person has
been so searched previously also.
(5) If the competent person suspects that the person searched is concealing any articles as aforesaid,
he or she shall detain him or her, and as soon as possible refer the matter to the manager or assistant
manager.
(6) No person being suspected under sub-regulation (5) shall be allowed to enter the mine until the
manager or other superior official is satisfied that the person has no such article in his or her possession.
(7) Any person who refused to allow himself or herself to be so searched or who on being searched is
found to have in his or her possession any of the article aforesaid, shall be guilty of an offence against
this regulation.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 301
CHAPTER – XII
LIGHTING AND SAFETY LAMPS
155. Whitewashing. – The roof and sides of the following places belowground in a mine shall be kept
whitewashed, namely:-
(a) every shaft inset and shaft bottom or siding and every bye-pass which is in regular use;
(b) the top and bottom of every haulage plane, every regular stopping place, siding, landing,
pass-bye and junction, except within 100 meters of the face;
(c) every travelling roadway;
(d) every room and place containing any engine, motor or other apparatus; and
(e) every first aid station belowground.
156. General lighting. - (1) Adequate general lighting arrangements shall be provided during working
hours –
(a) on the surface where the natural light is insufficient-
(i) in every engine house,
(ii) in the vicinity of every working shaft,
(iii) at every open cast working,
(iv) at every shunting or marshaling yard,
(v) at every place where persons have to work; and
(b) belowground –
(i) at every shaft inset and shaft bottom or landing or siding which is in regular use;
(ii) in every travelling roadway normally used by fifty or more persons during any shift:
Provided that the provisions of this sub-clause shall be deemed to have been complied with where
electric lamps or lights are provided to every person at work;
(iii) at the top and bottom of every self-acting incline in regular use;
(iv) at every place on a haulage roadway, at which tubs are regularly coupled or
uncoupled or attached to or detached from a haulage rope;
(v) at every place at which tubs are regularly filled mechanically;
(vi) at every room and place containing any engine, motor or other apparatus;
(vii) at every stope or place where any pillar or block is under extraction; and
(viii) at every first aid station belowground:302 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Provided that the lighting fixtures installed, in a mine or part where regulation 153 applies or in
blind end workings which are not ventilated by a mechanical ventilator, shall comply with the provisions
of the Central Electricity Authority (Measures relating to Safety and Electric Supply) Regulations, 2023.
(2) The lighting provided in a mine shall, as far as possible, be so arranged as to prevent glare or
eye strain.
(3) Where electric energy is available at the mine, the lighting arrangement made under sub-
regulation (1) shall be by electrical means.
(4) Where electric lighting is used, an additional light or lamp having no connection with electric
supply shall be kept continuously burning-
(a) belowground, in every shaft inset and shaft bottom or landing in regular use and in every
engine room;
(b) on the surface, after dark, at the top of every working shaft and in every engine room; and
(c) in travelling roadway and escape routes.
(5) Every electrical lamp-fitting shall be so constructed as to protect it from accidental damage and
adequate precautions shall be taken to prevent lamps being damaged from shot-firing.
(6) Fluorescent or luminescent path finder or indicator shall be provided all along the travelling
roadway and in the escape route in the mine.
157. Every person to carry a light. - The owner, agent or manager shall provide, free of cost, every
person employed belowground with a light or lamp adequate to enable him or her to perform his or her
duties in a proper and thorough manner and no such person shall proceed or remain belowground
without such light or lamp:
Provided that on his or her return to the surface, every such person shall, unless otherwise
directed by the manager by a general or special order in writing immediately return his or her lamp to
the lamp room.
158. Standard of lighting. - (1) If any doubt arises as to whether any lamp or light is of adequate
lighting performance or not, it shall be referred to the Chief Inspector-cum-Facilitator for decision.
(2) The Chief Inspector-cum-Facilitator may, from time to time, by a general or special order,
specify –
a) the type of lamp to be provided to specified categories of persons employed in a mine; or
b) the standard of lighting to be provided in specified areas or places in a mine.
159. Maintenance and examination of safety lamps. - (1) A competent person appointed for the
purpose shall clean, trim, examine and lock securely all such lamps before they are issued for use, and
no such lamp shall be issued for use unless it is in safe working order and securely locked;[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 303
(2) A competent person appointed for the purpose shall examine every safety lamp at the surface
immediately before it is taken belowground for use and shall assure himself or herself, as far as
practicable from external observation that such lamp is in safe working order and securely locked:
Provided that the person so appointed shall not perform any other duties, other than those
prescribed under sub-regulations (2) and (3) of regulation 154;
(3) A competent person appointed for the purpose shall examine every safety lamp on its being
returned after use.
(4) If on an examination made under sub-regulation (3), any lamp is found to be damaged or
misused, the person shall record nature of the damage or misuse in a bound paged book kept for the
purpose or in retrievable and non-editable electronic form, every such entry shall be countersigned or e-
signed and dated by the manager.
(5) The manager, assistant manager, or a competent person appointed for the purpose shall, once
at least in every seven days, examine thoroughly every safety lamp in use, and shall record the results
of examination of every such lamp in a bound paged book kept for the purpose or in retrievable and
non-editable electronic form.
(6) No person shall be appointed as a competent person under this regulation unless he or she is trained
in repair and maintenance of safety lamp, mine gases and their testing.
Provided that, after coming into force of these regulations, a holder of Gas-testing Certificate
granted under regulation 12 of the Metalliferous Mines Regulations, 1961 shall also deemed to be a
competent person under this regulation.
160. Use of safety lamps. - (1) Every safety lamp shall be numbered and so long as the lamp is in
use the number thereof shall be maintained in a legible condition.
(2) A competent person appointed for the purpose shall maintain a record of the lamps issued from
and returned to the lamp-room, and in the record so maintained, the number of the lamp issued to a
person shall be entered against the name.
(3) If any person returns to the lamp-room a lamp other than the one issued to him, the person
shall explain the cause and circumstances of the change.
(4) No un-authorised person shall either take or give out any safety lamp from the lamp-room.
(5) Every person who receives a lamp shall satisfy himself or herself that it is complete and in good
order and should he or she find any defect therein, he shall immediately return it to the lamp-room.
(6) No person shall willfully damage or improperly use, or unlock or open, or attempt to unlock or
open any safety lamp.
(7) Should any person find that the safety lamp in possession has become defective, the person
shall at once carefully extinguish the flame, if any, and report the fact to his superior official.304 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(8) The number of safety lamps at every mine shall be adequate to permit thorough cleaning and
checking before they are issued and in case of any doubt as to the sufficiency or otherwise of the safety
lamps provided at a mine, it shall be referred to the Chief Inspector-cum-Facilitator for decision.
161. Maintenance and repairs of safety lamps and electric torch or lamp. - (1) Every safety
lamp and electric torch or lamp shall be properly assembled and maintained in order and if any such
lamp or torch is found to be defective or damaged, it shall not be used or issued for use until the defect
or damage has been remedied.
(2) If the wires of any gauge of a flame safety lamp are broken or burnt away, the gauge shall not
be reconditioned for further use.
(3) Damaged and defective gauges, glasses or other parts of a safety lamp shall not be kept or
stored in the safety lamp-room.
(4) No glass of a safety lamp and no bulb of an electric safety lamp, shall be replaced except by a
glass or bulb of such type as the Chief Inspector-cum-Facilitator may, from time to time, specify by a
general or special order, and no other part of a safety lamp, other than a wick or battery, as the case
may be, shall be replaced except by a part manufactured by the manufacturers of the lamp to approved
specifications:
Provided that in the case of an imported safety lamp, a part manufactured indigenously may be
used if it is of such design as is approved by the Chief Inspector-cum-Facilitator.
(5) No repaired part shall be used in a safety lamp.
(6) In every flame safety lamp kept for the purpose of inspection or of testing for or detecting the
presence of inflammable gas, no oil other than an oil of a type approved by the Chief Inspector-cum-
Facilitator shall be used.
(7) No electric safety lamp shall be issued for use unless the covers of the battery and of the
headpiece are properly assembled, securely locked and sealed, and the battery is properly charged.
(8) No electric lamp shall be hung or held by the cable.
162. Precautions to be taken in safety lamp-rooms. – (1) No un-authorised person shall enter the
safety lamp room.
(2) No person shall smoke in the safety lamp-room.
(3) Where petrol, benzol, or any other highly volatile spirit is used in safety lamps, the following
precautions shall be observed, namely:-
a) lamps shall be cleaned, refitted and refilled in a separate room;
b) only such quantity of volatile spirit as is required for one working day shall be kept in any such
room;
c) internal relighters shall not be taken out of lamps and cleaned, repaired or refitted on the same
table were lamps are cleaned, refitted or refilled; and[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 305
d) adequate number of suitable fire extinguishers shall be provided and kept ready for use in
every such room.
CHAPTER – XIII
EXPLOSIVES AND SHOTFIRING
163. Type of Explosives to be used in mines. - (1) No explosive shall be used in a mine except that
provided by the owner, agent or manager which shall be of good quality and in good condition.
(2) No explosive, other than a fuse or a detonator shall be issued for use in a mine, or taken into or
used in any part of a mine, unless it is in the form of a cartridge:
Provided that site mixed slurry or emulsion explosives or ammonium nitrate fuel oil may be issued for
use or taken into, or used in non-cartridge form.
(3) Explosive cartridges shall be used in mine only in the form in which they are received.
(4) The preparation of cartridge from loose gunpowder, the drying of gunpowder and the reconstruction
of damp cartridges shall be carried out by a competent person and only in a place approved by the
Licensing Authority and in accordance with the rules made under the Explosives Act, 1884 (4 of 1884).
164. Storage of explosives. - (1) No owner, agent or manager shall store, or knowingly allow any
other person to store, within the premises of a mine any explosives otherwise than in accordance with
the provisions of the rules made under the Explosives Act, 1884 (4 of 1884).
(2) Explosives shall not be taken into or kept in any building except a magazine duly approved by
the Licensing Authority under the provisions of the Explosives Act, 1884 (4 of 1884).
(3) Explosives shall not be stored belowground in a mine except with the approval in writing of the
Chief Inspector-cum-Facilitator and subject to such conditions as may be specified therein and such
storage shall be done only in a magazine or magazines duly licensed in accordance with the provisions
of rules made under the provisions of the Explosives Act, 1884 (4 of 1884)
(4) Every license granted by the Licensing Authority under the provisions of the Explosives Act, 1884
(4 of 1884) for the storage of explosives, or a true copy thereof, shall be kept at the office of the mine.
165. Magazines and premises to store explosives. – (1) Every magazine or premises, where
explosives are stored shall be in charge of a competent person who shall be responsible for the proper
receipt, storage and issue of explosives.
(2) Explosives shall not be issued from the magazine unless they are required for immediate use:
Provided that if any explosive is returned to the magazine, they shall be re-issued before fresh stock is
used.
(3) Explosives shall be issued only to competent persons upon written requisition signed or thumb
impression by the Blaster and by an official authorised for the purpose, which shall be preserved by the
person in charge of the magazine or premises.306 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) The person in charge of the magazine or premises shall maintain, in a bound paged book kept
for the purpose or in retrievable and non-editable electronic form, a clear and accurate record of
explosives issued to each competent person and a similar record of explosives returned to the magazine
or premises.
166. Cases and containers for carrying explosives. - (1) No explosive shall be issued from the
magazine or taken into any mine except in a case or container of substantial construction which is
securely locked:
Provided that cases or containers made of iron or steel shall be heavily galvanised and no case or
container provided for carrying detonators shall be constructed of metal or other conductive material:
Provided further that, in case of an opencast mine, explosive shall be transported from the
magazine to the priming station or site of blasting in original packed cases in an explosive van having
valid license for the purpose.
(2) No detonator shall be kept in a case or container which contains other explosives, materials or tools
and two or more types of detonators shall not be kept in the same case or container:
Provided that nothing in this sub-regulation shall restrict the conveyance of primer cartridges
fitted with detonators in the same case or container for use in a wet workings or in a sinking shaft or
winze.
(3) No detonator shall be taken out from a case or container unless it is required for immediate use.
(4) Except as otherwise provided for, in regulation 168 no case or container shall contain more than
ten kilograms of explosives, and no person shall have in his or her possession at one time in any place
more than two such case or container:
Provided that nothing in this sub-regulation shall prohibit the conveyance of larger quantity of
explosives in bulk for supplying an underground magazine.
(5) Every case or container shall be numbered and as far as practicable, the same case or container
shall be issued to the same Blaster or competent person, as the case may be, every day.
(6) The key of every case or container shall be retained by the Blaster in his own possession
throughout his shift.
167. Transport of explosives. - (1) While explosives in bulk are lowered or raised in a shaft or winze,
a distinguishing mark shall be attached to the cage, skip or bucket containing the explosive; or the
person in charge of explosives shall travel in the same cage, skip or bucket.
(2) Every cage, skip or bucket containing explosives shall be gently lowered or raised; and it shall be the
duty of the pit top attendant or bellman, as the case may be, to adequately warn the winding engine
operator before the cage, skip or bucket is set in motion.
(3) While explosives are being carried on a ladder, every case or container shall be securely fastened to
the person carrying it.
(4) No person other than a Blaster shall carry any priming cartridge into a shaft which is in the course of
being sunk.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 307
(5) No priming cartridge shall be so carried except in a thick felt bag or other container sufficient to
protect it from shock as specified in sub-regulation (2) of regulation 166.
(6) No person shall transport explosives of Class 2 or Class 3 and detonators or any other Class 6
explosive containing its own means of ignition or initiation in the same carriage or vehicle.
[Explanation: The explosives of Class 2, Class 3, and Class 6 and detonator have the same meaning as
classified or defined under the Explosives Rules, 2008].
(7) The vehicles or carriages loaded with explosives shall be parked only at the places designated for the
purpose, whether near the place of charging or elsewhere, in the mine.
(8) No self-propelled machinery shall be used for transport of explosives belowground in a mine except
with prior permission in writing of the Chief Inspector-cum-Facilitator and subject to such conditions as
may be specified therein.
168. Transport of explosives in bulk. - The conditions and other details for transport of explosives in
bulk shall be specified by the Chief Inspector-cum-Facilitator, time to time, in a general order.
169. Reserve stations. – (1) No case or container containing explosives shall be left or kept
belowground except in a place designated by the manager for the purpose and so situated that it is not
frequented by work persons and every such place shall be kept clean, safe and adequately fenced, and
legibly marked ‘RESERVE STATION’.
(2) The conditions for site selection and other details for establishing a reserve station in a mine shall be
specified by the Chief Inspector-cum-Facilitator in a general order.
170. Blasters. - (1) The preparation of charges and the charging and stemming of holes shall be
carried out by or under the personal supervision of a competent person, in these regulations referred to
as a ‘Blaster’, who shall fire the shots himself or herself.
(2) No person shall be appointed to be a blaster unless he or she holds-
a) in the case of belowground mines, a Manager’s Certificate or Mining Supervisor’s Certificate or
Assistant Mining Supervisor’s Certificate or Blaster’s Certificate; and
b) in the case of opencast workings a Manager’s Certificate or Mining Supervisor’s Certificate
or Assistant Mining Supervisor’s Certificate or Blaster’s Certificate including certificate’s
restricted to opencast workings.
(3) If 30 or more persons are employed at any one time in any mine or district under the charge of
a competent person referred to in regulations 40 or 122, such person shall not perform the duties of a
blaster.
(4) No person whose wages depend on the amount of mineral, rock or debris obtained by firing
shots, shall be appointed to perform the duties of a blaster.
(5) The manager shall fix, from time to time, the maximum number of shot-holes that a blaster may
fire in any one shift and such number shall be based on-
(a) the time normally required to prepare and fire a shot-hole in accordance with the provisions
of these regulations;308 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) the time required for that blaster to move between places where shot-holes are fired;
(c) the assistance, if any, available to him or her in the performance of his or her said duties;
and
(d) any other duties assigned to him or her, whether statutory or otherwise, and shall not in
any case exceed -
(i) 80 in case they are fired electrically or by means of an igniter cord and
(ii) 50 in other cases:
Provided that where special conditions exist, the Chief Inspector-cum-Facilitator may by an order
in writing and subject to such conditions as may be specified therein, permit number of shot-holes to be
fixed in variance with the aforesaid provisions.
(6) The number of detonators issued to, and in the possession of, a blaster during his or her shift shall
not exceed the maximum number of shot-holes that he or she is permitted to fire under sub-regulation
(5).
171. Shot-firing tools. - (1) Every blaster on duty shall be provided with –
(a) a suitable shot-firing apparatus;
(b) suitable shot-firing cable;
(c) a suitable electric lamp or torch, a whistle and a stop watch;
(d) a tool, made entirely of wood, suitable for charging and stemming shot-holes;
(e) a scraper made of brass or wood suitable for cleaning out shot-holes;
(f) where fuses are used, a knife for cutting off fuses and, unless machine-capped fuses are
provided, also a pair of suitable crimpers for crimping detonators;
(g) where detonators are used, a pricker made of wood or of a non-ferrous metal for priming
cartridges;
(h) a suitable tool for detecting cracks; and
(i) a circuit tester for checking shot-firing circuits.
(2) No tool or appliance other than that provided under sub-regulation (1) shall be used by a
Blaster.
172. Drilling, charging, stemming and firing of shot-holes. - (1) No drill shall be used for drilling
a shot-hole unless it allows a clearance of at least 0.3 centimeter over the diameter of the cartridge of
explosive which it is intended to use.
(2) No shot-hole shall be charged before it is thoroughly cleaned.
(3) Before any shot-hole is charged, the direction of the hole shall, where practicable, be distinctly
marked on the roof or other convenient place.
(4) No detonator shall be inserted into a priming cartridge until immediately before it is to be used,
however that in case of wet workings, priming cartridges may be prepared at the nearest
convenient dry place and such primed cartridges shall be carried to the working place in a
securely closed case or container.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 309
(5) Detonators once inserted into a priming cartridge shall not be taken out.
(6) For use of two types of explosives in any shot-hole, the manager shall frame and enforce
standing orders for the safe use of explosives and the details in this regard shall be incorporated
in the scheme of mining referred in regulation 104.
(7) The blaster shall, to the best of own judgment, ensure that no shot-hole is over-charged or
under-charged, having regard to the task to be performed.
(8) Shots shall be fired electrically or by any other means or instruments or apparatus as approved
by the Chief Inspector-cum-Facilitator.
(9) Every shot-hole shall be stemmed with sufficient and suitable non-inflammable stemming so as
to prevent the shot from blowing out.
(10) Only sand loosely filled in, or soft clay lightly pressed home, or a compact but not hard mixture
of sand and clay or water shall be used as stemming.
(11) In charging or stemming a shot-hole, no metallic tool, scraper or rod shall be used and no
explosive shall be forcibly pressed into a hole of insufficient size.
(12) No shot shall be fired except in a properly drilled, charged and stemmed shot-hole.
(13) No shot-hole shall be fired by a fuse less than 1.2 meters in length.
(14) All surplus explosives shall be removed from the vicinity of a shot-hole before a light is brought
near it for the purpose of lighting the fuse or before connecting the shot firing cable to the shot-
holes.
(15) As far as practicable, a shot shall be fired by the same blaster who charged it.
(16) In any mine in which explosives other than gunpowder are used, every shot shall be fired
electronically.
(17) Not more than ten holes shall be fired in one round unless they are fired electronically or by
means of an igniter cord.
(18) No shot-hole shall be charged except those which are to be fired in that round and all shot-holes
which have been charged shall be fired in one round.
(19) In case of opencast workings, no shots shall be fired except during day light hours.
(20) Where a large number of shots have to be fired, shot-firing shall, as far as practicable, be
carried out between shifts.
(21) No person shall remove any stemming, otherwise than by means of water or an approved
device, or pull out a detonator lead or remove explosive from any charged shot-hole.
173. Use of Ammonium Nitrate-Fuel Oil, site mixed slurry or emulsion explosives etc. -
Conditions for use of ammonium nitrate-fuel oil, site mixed slurry or emulsion explosives etc. in an
opencast mine shall be specified by the Chief Inspector-cum-Facilitator in a general order.
Provided that, ammonium nitrate-fuel oil, site mixed slurry or emulsion explosives etc., shall not
be used in belowground except with the prior permission in writing of the Chief Inspector-cum-Facilitator
and subject to such conditions as may be specified therein.310 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
174. Deep-hole blasting. - (1) Conditions for conduct of deep hole blasting in a mine shall be
specified by the Chief Inspector-cum-Facilitator, in a general order.
(2) All holes charged on any one day shall be fired on the same day:
Provided that in special circumstances where charged holes are required to sleep over night, it
shall be carried out only with prior permission by the Chief Inspector-cum-Facilitator, in writing, and
subject to such conditions as may be specified therein.
175. Electric and Electronic shot-firing. - (1) No shot shall be fired except by means of a suitable
shot-firing apparatus of a type approved by the Chief Inspector-cum-Facilitator and the number of shots
fired at any one time by the apparatus shall not exceed the number for which it is designed.
(2) Every electrical or electronic shot-firing apparatus shall be so constructed and used that –
(a) it can only be operated by a removable handle or plug;
(b) the handle or plug shall not be placed in position until a shot is about to be fired and
shall be removed as soon as a shot has been fired;
(c) the firing circuit is made and broken either automatically or by means of a push-button
switch.
(3) No shot-firing apparatus shall be used which is defective and every apparatus shall once at least
in every three months, be tested by a competent person to ascertain whether it is in safe working order.
(4) If the apparatus fails to fire all the shots in a properly connected circuit, the shot-firer shall
return the apparatus to the manager or assistant manager as soon as possible, and it shall not be used
again unless it has been tested on the surface and found to be in safe working order.
(5) The result of every test made under sub-regulations (3) and (4) shall be recorded in a bound
paged book kept for the purpose or retrievable non-editable electronic form and shall be signed and
dated by the competent person making the test.
(6) No current from a signalling, lighting or power circuit shall be used for firing shots.
(7) The shot-firer shall-
(a) retain the key of the firing apparatus in his or her possession throughout his or her shift;
(b) use a well-insulated cable of sufficient length to permit him or her to take proper shelter
and in case of belowground working sufficient to take two right angle turns of pillar, and in
no case, shall this cable be less than 50 meters in length;
(c) before coupling the cable to the firing apparatus, couple up the cable himself or herself to
the detonator leads;
(d) take care to prevent the cable from coming into contact with any power or lighting cable or
other electrical apparatus;
(e) take adequate precautions to protect electrical conductors and apparatus from injury;
(f) himself or herself couple the cable to the firing apparatus and before doing so, see that all
persons in the vicinity have taken proper shelter as provided under regulation 176;
(g) after firing the shots and before entering the place of firing, disconnect the cable from the
firing apparatus.
(8) Where more than one shot are to be fired at the same time,-[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 311
(a) care shall be taken that all connections are properly made;
(b) all shots, if fired belowground, shall be connected in series;
(c) the circuit shall be tested, either for electrical resistance or for continuity, before connecting
it to the firing apparatus, which shall be made with an apparatus specifically designed for
the purpose and only after all persons in the vicinity have taken proper shelter as provided
under regulation 176;
(d) the cable to the shot-firing apparatus shall be connected last;
(e) detonators of the same electrical resistance shall only be used.
176. Taking shelter before firing shots. - (1) The blaster shall, before a shot is charged, stemmed
or fired, see that all persons other than the assistants, if any, in the vicinity, have taken proper shelter,
and shall also take suitable steps to prevent any person approaching the shot and shall take adequate
shelter, along with assistants, if any, before firing the shots.
(2) In the case of an opencast working, the blaster shall not charge or fire a shot–
(a) unless the blaster has taken the precautions laid down in sub-regulation (1);
(b) unless sufficient warning, by efficient signals or other means approved by the manager, is
given over the entire area falling within a radius of 500 meters from the place of firing,
hereinafter referred to as the danger zone, and also it shall be ensured that all persons
within such area have taken proper shelter; and
(c) where any part of a public road or railway lies within the danger zone, unless two persons
are posted, one each in either direction at the two extreme points of such road or railway
which fall within the danger zone who have, by an efficient system of telephonic
communication or hooter or loudspeakers or other means, intimated clearance of traffic to
the blaster and have also warned the passers-by and vehicles, if any, which have passed by
such road or railway.
(3) In the case of an opencast working, where any permanent building or structure of permanent
nature, not belonging to the owner, lies within the danger zone, the aggregate maximum charge in all
the holes fired at one time shall not exceed two kilograms unless permitted by the Chief Inspector-cum-
Facilitator and subject to such conditions as may be specified therein:
Provided that if blasting is done with delay detonators or other means and that there is a delay of
at least half a second between successive shots fired, maximum charge of two kilograms can be used in
each hole:
Provided further that if the shortest distance from the place of firing to any part of such building
or structure is less than 50 meter irrespective of the amount of the charge, no blasting shall be done
except with the permission in writing of the Chief Inspector-cum-Facilitator and subject to such
conditions as may be specified therein.
(4) Notwithstanding anything contained in sub-regulation (3), the Chief Inspector-cum-Facilitator
may, by an order in writing and subject to such conditions as may be specified, exempt any mine or
part thereof from the operation of the provisions of sub-regulation (3), on the ground that the312 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
observance of its provisions is not necessary or reasonably practicable on account of the special
conditions existing thereat.
(5) Where the working, either above or belowground, offer insufficient protection against flying
fragments or missiles, adequate shelter or other protection shall be provided.
(6) When two working places belowground have approached within nine meters of each other, the
blaster shall not fire any shot in any one of the said working unless all persons have been withdrawn
from the other working place and the same has been so fenced off as to prevent persons inadvertently
coming in direct line of the shot.
(7) Where shots are to be fired in two or more adjoining stopes or development faces, the blasters
shall so arrange the time of firing of shots, from return end side, so that shots in only one of the stopes
or development faces are fired at one time.
177. Use of permitted explosives. - (1) No explosive other than a permitted explosive shall be used
in any mine or part to which regulation 153 applies or where the Chief Inspector-cum-Facilitator may by
an order in writing, require the use of such explosive.
(2) In any mine or part in which the use of permitted explosives is required under sub-regulation
(1), no detonator shall be used unless it is an electronic detonator with a copper tube.
(3) No shot of a permitted explosive shall be fired except by means of a shot-firing apparatus of a
type approved by the Chief Inspector-cum-Facilitator from time to time by a general or special order:
Provided that where special conditions exist, the Chief Inspector-cum-Facilitator may by an order
in writing and subject to such conditions as may be specified therein, permit the use of any other shot-
firing apparatus.
(4) In any mine to which regulation 153 applies, the following provisions shall have effect, namely:-
(a) notwithstanding anything contained in the regulations, no shot shall be stemmed or fired by
any person who does not hold either a Manager’s Certificate, or Mining Supervisor’s
Certificate or Assistant Mining Supervisor’s Certificate;
(b) where more shots than one are charged for firing, the shots shall be fired simultaneously;
no delay-action detonator shall be used, except with the previous permission in writing of
the Chief Inspector-cum-Facilitator and subject to such conditions as may be specified
therein;
(c) If in a ventilating district, presence of inflammable gas is detected in any place, no shot-
hole shall be charged, stemmed or fired in that place or in any other place situated on its
return side, till such place has been cleared of gas and declared safe;
(d) immediately before charging a shot-hole or a round of shot-holes, and again before firing
the shots, the blaster shall carefully test for inflammable gas at all places within a radius of
twenty meters of the place of firing.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 313
178. Inspections after shot-firing. - (1) After a shot has been fired, the blaster shall not enter or
allow any other person to enter the place until the atmosphere in the area is free from dust, smoke or
fumes:
Provided that the blaster shall before any other person enters the place, make a careful examination and
with his or her assistants, if any, make the place safe.
(2) No other person shall enter the place, and where guards have been posted they shall not be
withdrawn, until the examination has been made and the place has been declared safe in all respect.
(3) In the case of opencast workings, after shots have been fired, an all clear signal shall be given
except in the case of a misfire.
(4) After shots have been fired, all persons engaged in clearing material shall look for unexploded
cartridges and detonators and if such a cartridge and detonator is found, it shall be removed and shall
as soon as possible be handed over to a blaster or other official.
179. Misfires. - (1) The number of shots which explode shall, unless the shots are fired electrically or
by means of an igniter cord, be counted by the blaster and another competent person authorised for the
purpose; and unless it is certain that all the shots have been exploded, no person shall re-enter or be
permitted to re-enter the place until 30 minutes after the firing of shots:
Provided that where shots are fired electronically, this interval may be reduced to not less than five
minutes after the source of electricity has been disconnected from the cable.
(2) In the event of a misfire, the entrance or entrances to the working place shall be barricaded or
fenced so as to prevent inadvertent access, and no work other than that of locating or relieving the
misfire shall be done therein until the misfire has been located and relieved.
(3) In opencast workings, it shall be sufficient to mark the place of the misfire with a red flag.
(4) In the event of a misfire, the tamping may be sludged out with compressed air or water under
pressure or removed by such other means as may be approved by the Chief Inspector-cum-Facilitator
and subject to such conditions as may be specified therein and the hole shall thereafter be re-primed
and fired.
(5) If the misfire contains a detonator, the leads or fuse thereof shall be attached by a string to the
shot-firing cable or some distinctive marker.
(6) Except where the misfire is due to faulty cable or a faulty connection, and the shot is fired as soon
as practicable after the defect is remedied, or where a shot has been re-primed and fired under sub-
regulation (4) another shot shall be fired in a relieving hole which shall be so placed and drilled in such
a direction that at no point shall it be nearer than thirty centimeters from the misfired hole, the new
hole shall be bored in the presence of a blaster, preferably the same person who fired the shots.
(7) After a relieving shot has been fired, a careful search for cartridges and detonators, if any, shall
be made in the presence of the blaster or other competent person holding a Manager’s or Mining
Supervisor’s Certificate or Assistant Mining Supervisor’s Certificate appointed for the purpose by the
manager, amongst the material brought down by the shot:
Provided that in the case of workings belowground if such cartridge, detonator is not recovered,
the tubs or any hauling vehicles into which the material is loaded shall be marked and a further search314 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
made on the surface and as far as possible, the search for the detonators and cartridges and the loading
of any ore, stone or debris, which may contain a detonator, shall be carried out without the aid of tools.
(8) If a misfired hole is not dislodged by a relieving shot, the procedure laid down in sub-regulations
(6) and (7) shall be repeated.
(9) A misfired hole which cannot be dealt with in the manner as prescribed, shall be securely
plugged with a wooden plug, and no person other than a blaster, an official or a person authorised for
the purpose shall remove or attempt to remove any such plug.
(10) When a misfired shot is not found, or when a misfired shot is not relieved, the blaster shall,
before leaving the mine-
(a) give information of the failure to such blaster or official as may relieve or take over charge
from the blaster;
(b) record, in a bound paged book kept for the purpose or in retrievable and non-editable
electronic form, a report on every misfire, whether suspected, and whether shot-hole is
relieved or not relieved;
(c) sign or e-sign the report and, to record in the said book or in retrievable and non-editable
electronic form the action taken for reliving the misfired shot-hole.
(11) The blaster of the next shifts shall locate and blast the misfired hole, but if after a thorough
examination of the place, the place where the misfire was reported to have occurred, the blaster is
satisfied that no misfire has actually occurred, may permit drilling in the place.
(12) In case of opencast mines, the owner, agent and manager of a mine shall draw up a plan which
shall instruct all blasters the detail procedure to be followed in the event of a misfired shot.
180. Precaution in case of sockets, etc. - (1) Before the commencement of drilling in any working
place, the competent person in charge of the place shall see that all loose rock is removed from the face
and the area lying within a radius of two meters of the proposed shot-hole is thoroughly cleaned or
washed down with water and carefully examined for the presence of misfires or sockets:
Provided that where special conditions exist, the Chief Inspector-cum-Facilitator may by an order
in writing and subject to such conditions as may be specified therein, grant a relaxation from these
provisions.
(2) If any socket is found, it shall be dealt with in the manner prescribed in regulation 179.
(3) No person shall bore out a hole that has once been charged or attempt to withdraw a charge
either before firing or after a misfire or deepen or tamper with any empty hole or socket left after shot-
firing.
181. Duties of blaster at end of the shift. - Immediately after end of the shift, the blaster shall-
(a) return all unused explosive to the magazine, or premises is provided under regulation 164,
to such magazine or premises; and
(b) record, in a bound paged book kept for the purpose or in retrievable and non-editable
electronic form, the quantity of the explosive taken, used and returned, the places where[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 315
shots were fired and the number of shots fired, and misfires, if any, which shall be signed
or e-signed and dated.
182. General precautions regarding explosives. - (1) No person, whilst handling explosives or
engaged or assisting in the preparation of charges or in the charging of holes, shall smoke or carry or
use a mobile phone or electronic gadgets or light other than an enclosed light, electric torch or lamp:
Provided that nothing in this sub-regulation shall be deemed to prohibit the use of an open light
for lighting fuses.
(2) No person shall take any mobile phone, electronic gadgets or light other than an electric torch or
an enclosed electric lamp into any explosive magazine or premises.
(3) Where wireless or walkie-talkie devices are used by the blasting personnel, such as assistant
manager, mining supervisor in-charge of blasting, blasters and assistants to blaster, a standard
operating procedure for safe use of such devices specifying the precautions to be taken by them with
regard to obviate any accidental initiation of explosive due to radio frequency shall be formulated and
implemented by manager the mine.
(4) The owner, agent, or manager shall take adequate steps to prevent pilferage of explosives
during its storage, transport and use in the mine.
(5) The owner, agent and manager shall ensure that no person is employed for transport, handling
and use of explosives unless he or she has been imparted specialized training for the purpose.
(6) No person shall have explosives in his or her possession except as provided for in these regulations,
or hide or keep explosives in a dwelling house.
(7) Any person finding any explosives in or about a mine shall deposit the same in the magazine or
premises and every such occurrence shall be reported to the manager in writing.
(8) Blaster and their helpers shall-
(a) not use battery operated watches, mobile phones, synthetic cloths and socks;
(b) use only conducting type of foot-wear; and
(c) in case of leather shoes or boots, the sole shall also be of leather and without hobnails.316 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER- XIV
MACHINERY, PLANT AND EQUIPMENT
183. Use of certain machinery, equipment and devices in metalliferous mines. – (1) No
internal combustion engine shall be used belowground in a mine expect with the prior permission in
writing of the Chief Inspector cum Facilitator and subject to such conditions as may be specified therein.
(2) In every mine or part thereof where regulation 153 applies, only flame proof electrical apparatus
and equipment shall be used belowground unless otherwise provided for under the provisions of the
Central Electricity Authority (Measures relating to Safety and Electric Supply) Regulations, 2023.
(3) The Chief Inspector-cum-Facilitator may, from time to time by notification in the Official Gazette,
specify appliances, equipment, machinery, or other material, that are or may be used in a mine, which
shall be of such type, standard and make as approved by the Chief Inspector-cum-Facilitator by a
general or special order, and where any such appliance, equipment, machinery or other material had
been specified by the Chief Inspector-cum-Facilitator, any such appliance, equipment, machinery, or
material, other than that approved by the Chief Inspector-cum-Facilitator as aforesaid, shall not be used
in any mine.
(4) Where in respect of any appliance, equipment, machinery or other material, the Chief Inspector-
cum-Facilitator has not made any notification under sub-regulation (3) and any such appliance,
equipment, machinery or material is used in any mine, the Chief Inspector-cum-Facilitator or Regional
Inspector-cum-Facilitator may, if he is of the opinion that the use of such appliance, equipment,
machinery, or material is likely to endanger safety in the mine, by an order in writing, prohibit the use
thereof until the same is approved by the Chief Inspector-cum-Facilitator.
(5) The owner, agent or manager of a mine while acquiring any approved type of machinery,
equipment, apparatus, device, lamp, light or materials shall ensure that they conform to approved
specifications in all respects and shall also be responsible for maintaining them as per the approved
standard.
(6) A copy of approval of every approved machinery, equipment and device being used shall be kept at
the office of the mine.
(7) Where machinery is used for lifting, pulling, drilling other than by hand held drill, dinting,
ripping, cutting, loading, hauling or dumping, code of practices separately for each type of machinery
with respect to the method of work, shall be framed by the engineer in consultation with manager,
containing standard operating procedure for the control and guidance of persons employed for the
erection, installation, operation, repairs, maintenance, dismantling and transportation of such machinery
and ancillary equipment as well as for the prevention of accident and to provide for the safety, health,
convenience and discipline of the persons so employed and the engineer authorised for the purpose
shall be responsible for the implementation of above standard operating procedure.
(8) Each machinery shall be examined by a committee having expertise in the field, constituted by
owner or agent of the mine, at least once in three years to assess the condition of the machinery in
order to decide suitability of the machinery for further use in mines.
Provided that machinery declared unfit, shall not be put in to use unless recommended[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 317
maintenance and repairs are carried out and declared fit for use, by the aforesaid committee.
(9) All persons employed or to be employed to operate belowground machinery shall be trained and
their competency shall be evaluated by committee constituted by the management, who shall be
persons who are not connected with imparting of training; provided that the training officer may be co-
opted in the committee.
(10) suitablly designed cabin with seat for operators shall be provided in mineral processing plants to
protect the persons against heat, dust, noise etc.
184. General provisions for construction and maintenance of machinery. – (1) All parts and
working gear, whether fixed or movable, including the anchoring and fixing appliances, of all machinery
and apparatus used as or forming part of the equipment of a mine, and all foundations in or to which
any such appliances are anchored or fixed shall be of good design, sound construction, suitable material,
adequate strength and free from visible defect and shall be properly maintained.
(2) (a) The work shop for carrying out activities in connection with errection, assembly, maintenance,
repair, overhaul, dismantling or any other work related to maintenance of machinery within the precinct
of the mine or adjacent to the mine shall have proper layout to ensure safety of the persons employed
thereat;
(b) The workshop shall have –
(i) proper flooring with demarcation (for movement of vehicle or equipment, spares and
materials) on floor and adequate cover on the top with bays clearly earmarked;
(ii) adequate illumination and ventilation arrangement;
(iii) adequate firefighting arrangement;
(iv) adequate oil and lubricant storage space with colour codes;
(v) battery charging room, if required;
(vi) separate welding bays sufficienty protected and away from inflammable material;
(vii) adequate arrangement for collection and disposal of used oil, filters, oil rags, scraps
and other mainteance waste etc.;
(viii) separate path for HEMM and other vehicles;
(ix) store for inventory;
(x) separate parking for HEMM and other vehicles;
(xi) properly demarcated and guarded tyre inflation area;
(xii) HEMM washing area and inspection pit;
(xiii) lifiting and load handling arrangments of adequate capacity;
(xiv) any other provisions consistent with safety of person and machinery;
(xv) suitable type of tyre handlers with sufficient capacity and necessary safety features
shall be provided to eliminate manual handling during the removal, installation, and
maintenance of other than roadway (OTR) tyres used on heavy earth moving
machinery;
(xvi) suitable protective cages for air filling on vehicle as well as while assembling;318 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(xvii) every Oxy-acetylene or other gas welding and cutting apparatus shall be fitted with
approved flashback arrestors at both the cylinder regulator ends and the blowpipe
ends of the supply hoses for both oxygen and fuel gas lines; and
(xviii) dispensing equipment identified by a distinct colour code or tags for each oil or
lubricant being used.
(3) whenever activities in connection with errection, assembly, maintenance, repair, overhaul,
dismantling etc of machinery is not reasonably feasible to be undetaken at workshop, the aforsaid
acivities shall be carried out at site after proper cordoning off the place to ensure safety of the persons
employed thereat.
(4) Where surface transportation and handling machinery including mineral processing plants, repair
sheds or workshops are provided, code of practices for their erection, installation, operation, repairs,
maintenance, dismantling and transportation of such machinery, plants and ancillary equipments as well
as for the prevention of accident and to provide for the safety, health, convenience and discipline of the
persons so employed shall be framed by an engineer in consultation with manager, and the engineer
authorised for the purpose shall be responsible for the implementation of above code of practices.
185. Apparatus under pressure. - (1) All apparatus, used as or forming part of the equipment of a
mine, which contains or produces air, gas or steam at a pressure greater than atmospheric pressure
shall be so designed, constructed, installed and maintained as to obviate any risk of fire, bursting,
explosion or collapse or the production of noxious gases.
(2) Every air receiver forming part of a compressing plant shall be fitted with a safety valve and an
air gauge which shows pressure in excess of the atmospheric pressure.
(3) Before an air-receiver is cased in or put into commission, the engineer or other competent
person authorised for the purpose shall subject it to a hydraulic test at a pressure at least one-and-a-
half times the maximum permissible working pressure and a similar test shall be made after every
renewal or repair and in any case at intervals of not more than three years. Wall thickness of the
receiver shall be measured during the test for ascertaining residual life of the receiver.
(4) The result of every such test under sub-regulation (3) shall be recorded in a bound paged
book kept for the purpose or in retrievable and non-editable electronic form duly signed or e-signed and
dated by the person carrying out the test and countersigned by the engineer appointed for the purpose.
(5) The supply of air for air-compressors shall be drawn from a source free from dust and fumes.
(6) All apparatus used as or forming part of the equipment in a mine which contains or produces
hydraulic fluid or emulsion under pressure shall be so designed, constructed, installed and maintained as
to obviate any risk of bursting and fire.
186. Precautions regarding moving parts of machinery. - (1) Every winch or wind-lass shall be
provided and used with a stopper, pawl or other reliable holder.
(2) Every drum, fly-wheel and every other dangerous exposed part of any machinery used as, or forming
part of the equipment of a mine shall be adequately fenced by suitable guards of substantial
construction to prevent danger and such guards shall be kept in position while the parts of the[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 319
machinery are in motion or in use, but they may be removed for carrying out any examination,
adjustment or repair if adequate precautions are taken.
(3) It shall be the duty of the engineer in- charge, the supervisory officials and other authorised persons
to keep all guarding properly maintained in good condition and in the correct position.
(4) During repair, adjustment, cleaning or lubrication of any machinery, suitable tags indicating that the
machinery is under such operation shall be placed near its controlling device.
(5) No person shall, or shall be allowed to repair, adjust, clean or lubricate machinery in motion
where there is risk of injury.
(6) No person shall, or shall be allowed to, shift or adjust a driving belt or rope while the
machinery is in motion unless a proper mechanical appliance is provided and used for the purpose.
(7) No person in close proximity to moving machinery shall wear, or be permitted to wear, loose
outer clothing.
(8) No un-authorised person shall enter any engine room or in any way interfere with the engine.
187. Engine rooms and their exits. - Every engine, motor, transformer and battery charging room,
and every room in which highly inflammable materials are stored on the surface shall be kept clean, and
be provided with at least two exists, which shall be properly maintained and kept free from obstruction.
188. Working and examination of machinery. - (1) No machinery shall be operated otherwise than
by or under the constant supervision of a competent person.
(2) Every person in-charge of any machinery, apparatus or appliance shall, before commencing
work, see that it is in proper working order; and if he or she observes any defect therein, shall
immediately report the fact to the manager, engineer or other competent person.
(3) Every person in-charge of an air-receiver shall see that no extra weight is added to the safety
valves and that the permissible pressure of air is not exceeded.
(4) An official or competent person appointed for the purpose shall, once at least in every seven
days, make a thorough inspection of machinery including heavy earth moving machinery and plant in
use, and shall record the result thereof in a bound paged book kept for the purpose or in retrievable and
non-editable electronic form.
(5) In respect of electrical machinery and plant, the competent person shall be an engineer or
electrician holding qualifications as specified in the Central Electricity Authority (Measures relating to
Safety and Electric Supply) Regulations, 2023.
189. Belowground face equipment, including continuous mining and cutting machines. - (1)
All self-propelled face equipment, which are used in belowground metalliferous mines shall be equipped
with substantially constructed canopies or cabs, located and installed in such a manner that when the
operator is at the operating control of such equipment person shall be protected from fall of roof, face or
side.320 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) In every mine to which regulation 153 applies, methane monitors shall be installed on all roof
bolting machines, cutting machines, loading machines and other mechanized equipment used to extract
or load mineral.
(3) All face equipment used to cut mineral or drill holes for roof support shall be equipped with adequate
lighting to illuminate the workplace.
(4) All face equipment used to cut mineral or drill holes for roof support shall be equipped with
engineering controls such as water sprays, dust collector and air-scrubber system to control respirable
mine dust.
(5) Where remote controlled devices are used in belowground metalliferous mines, the owner, agent
and manager shall ensure-
(a) testing of the remote controlled devices to ensure they are all on separate frequencies and
will not accidentally cause a machine not been intentionally operated to activate or move;
(b) proper training of all operators on the use of the remote control device; and
(c) designing of a mining scheme for the use of remote control mining equipment which
include the safe location for the machine operators and any other workers in the area to
prevent crushing accidents while the machine is in movement, and from respirable dust and
noise hazard.
(6) Every belowground mobile machinery, used in mine shall be fitted with such safety features or
devices as the Chief Inspector-cum-facilitator may, from time to time, specify by a general order.
190. Cranes and lifting gears. – (1) All machinery used to lift or transport equipment and materials,
shall be designed, constructed, erected, inspected, maintained and operated as specified by the
manufacturer.
(2) The rated capacity or legible load chart, where appropriate, of a crane, hoist, grab or winch
shall be permanently marked on the structure at a clearly visible place and, in any case, such machinery
shall not be operated at a capacity in excess of the rated limit.
(3) No person shall load any crane, grab or winch in excess of the safe working load except for the
purpose of a test, which shall be carried out by an authorised person and only in a manner specified by
the manufacturer.
(4) The rated capacity of a hoist shall not exceed the capacity of the structure supporting the hoist.
(5) The engineer or other competent persons shall regularly inspect and maintain all cranes and
hoists to ensure that every component thereof is capable of carrying out its original designed function,
who shall also maintain a record thereof, duly signed or e-signed and dated by him.
(6) A crane or hoist shall not be used until any condition that may endanger safety of any person is
remedied.
(7) All installations, modifications and repairs to load-bearing equipment shall be certified by a
competent person or authorised organization in accordance with the original design and safety standard.
(8) All cranes or hoists with a boom that is movable in the vertical plane shall-[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 321
(a) have a device that can be clearly read by the operator, to indicate the boom angle if the
rated capacity is affected; and
(b) be fitted with an automatic load indicator showing the safe working load and overload
warning device.
(9) All modifications that affect the rated capacity of a crane or hoist shall be assessed, and the
rated capacity shall be adjusted by the original equipment manufacturer or a competent person or
authorized organisation.
(10) There shall be a safe means of access and egress to the operator’s position and to maintenance
locations for all cranes and hoists.
(11) If a normal means of egress is not always available to the operator, then an alternative safe
means shall be provided to get from the operating position to a safe area in the event of a power failure
or other emergency.
(12) Effective audible and visual communication devices shall be installed on a crane or hoist.
(13) The crane or hoist operator shall sound a warning signal when it is necessary to alert workers.
(14) All controls on a crane or hoist shall be clearly identified and shall return to neutral when
released, and an automatic braking system shall be activated.
(15) The operator of a crane or hoist shall be protected against hazardous conditions such as
airborne contaminants, falling or flying objects and excessive heat or cold.
(16) The operator’s seat on a crane or hoist shall be of an ergonomic design that allows the operator
to operate the equipment safely.
(17) All the hooks, hook guards or latches, wire ropes, chains and other attachments and fittings
shall be maintained and inspected on a regular basis.
(18) The operator of a crane or hoist shall perform a check at the start of each shift and test the limit
switch and a report thereof shall be maintained.
(19) Transport routes for cranes shall be clear of obstructions and transport routes for wheeled or
tracked cranes shall, as far as practicable, be level.
(20) Training shall be given to crane operators to ensure proper and safe operation of the crane and
rigging loads.
(21) No operator shall leave a crane or hoist unattended while a load is suspended.
(22) No crane shall work in the vicinity of overhead lines unless a specific "Permit to Work" has been
obtained from the electrical supervisor, confirming that the line is either de-energized or that specific
physical barriers (guarding) have been erected.
(23) No person shall stand, pass, or work beneath a suspended load or within the swing radius of the
crane's rotating superstructure; and suitable barriers or warning tapes shall be used to cordon off the
swing radius of the crane to prevent unauthorized entry.
191. Design, operation and maintenance of heavy earth moving machineries (HEMMs)
including trucks, tippers and dumpers. - (1) Every heavy earth moving machinery (HEMM)
including trucks, tippers and dumpers or any other machinery as may be specified by the Chief322 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Inspector-cum-Facilitator, by general or special order, shall be so designed as to afford the operator
clear and uninterrupted vision all around.
(2) Every heavy earth moving machinery, including trucks, tippers and dumpers, used in mine shall
be fitted with such safety features or devices as the Chief Inspector-cum-Facilitator may, from time to
time, specify by a general order.
(3) Truck mounted drill machines designed for tube well drilling for sources of water shall not be
used for drilling holes for blasting purpose and only proper type of blast hole drill machine, especially
designed for mining purpose, shall be used in the mine
(4) Every heavy earth moving machinery shall be under the charge of a competent person,
authorised as Operator, in writing by the manager.
(5) All persons employed or to be employed to operate heavy earth moving machinery shall be
trained and their competency shall be evaluated by a committee constituted by the management, who
shall be persons who are not connected with imparting of training:
Provided that the training officer may be co-opted in the committee as observer.
(6) Only such fitters or mechanics possessing operator's authorisation, shall be allowed to carry out
test-run of heavy earth moving machineries.
(7) No person other than the operator or the manager or any person so authorised in writing by the
manager shall be allowed to ride on a heavy earth moving machinery.
(8) The area marked for brake testing shall be kept adequately fenced.
(9) Refuelling operations within the opencast mine workings shall be restricted exclusively to designated
fixed fuelling stations:
Provided that mobile fuel bowsers for refuelling shall be used as per the conditions specified by
Chief Inspector-cum-Facilitator by a general order.
192. General precautions. - (1) All machinery and plant used in connection with working of a mine
shall be of good design, sound construction, suitable material, adequate strength, free from defects and
properly maintained.
(2) The owner, agent and manager shall provide adequate training facilities and ensure proper
training of persons employed for operation and maintenance of machinery and plant.
(3) No person except an engineer or other competent person under his or her supervision shall
undertake any work on machinery and plant in which technical knowledge or experience is required.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 323
Chapter-XV
MISCELLANEOUS
193. Fences. - (1) Every tank or reservoir or other dangerous place in or about a mine, which has been
formed as a result of, or is used in connection with, mining operations, shall be kept securely fenced.
(2) Every fence erected on the surface shall, once at least in every seven days, be examined by a
competent person and a report of every such inspection shall be recorded in a bound paged book kept
for the purpose or in retrievable and non-editable electronic form, duly signed or e-signed and dated by
the person who made the examination.
(3) Any fence, gate or barricade may be temporarily removed for the purpose of repairs or other
operations, if adequate precautions are taken.
(4) If any doubt arises as to whether any fence, guard, barrier or gate provided under this
regulation is adequate, proper or secure, or as to whether the precautions taken under sub-regulation
(3) are adequate, it shall be referred to the Chief Inspector-cum-Facilitator for decision.
194. General Safety. - (1) No person shall negligently or willfully do anything likely to endanger life or
limb in the mine, or negligently or willfully omit to do anything necessary for the safety of the mine or
the persons employed therein.
(2) No person shall, except with the authority of an official, remove or pass through any fence, barrier or
gate, or remove or pass any danger signal.
(3) Subject to any directions that may be given by an official, no person shall, except for some justifiable
purpose, go into any part of the mine other than that part in which he works, or travels to or from
his working place by any roadway other than the proper traveling roadway.
(4) No person shall sleep while on duty.
(5) Subject to the provisions of the Code and of these regulations and orders made thereunder, no
person shall remain in a mine beyond the period over which his shift extends.
(6) No person shall, while on duty, be in an intoxicated state.
(7) The owner, agent and manager shall take steps to reduce the noise level and to reduce the exposure
of work persons to noise.
(8) No person shall work or allowed to work without appropriate ear protection in an area where noise
level is equivalent to or exceeds 90 dB(A).
[dB(A) or A-weighted decibel is an expression of the relative loudness of sounds as perceived by
human ear. A-weighting is the standard for determining hearing damage and noise pollution.]
(9) No person shall enter or allowed to enter an area where noise level is 140 dB(A) or more.
(10) The Chief Inspector-cum-Facilitator may, from time to time, by notification, specify the permissible
noise exposure in any area or place in a mine.
(11) The area, where noise level is exceeding 90dB(A), shall be clearly demarcated.
(12) The Owner, agent and manager shall ensure that area noise mapping is conducted in working areas
and personal noise dosimetry for work persons exposed to noise level exceeding 85 dB(A) as per the324 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
procedure specified by Chief Inspector-cum-Facilitator by general or special order and issued from time
to time.
(13) The Owner, Agent or Manager shall take necessary steps to eliminate or minimize the exposure of
vibration to their workmen, so that, the exposure is limited to;
(i) Hand Arm Vibration (HAV):
(a) the daily ELV of 5m/s2 A(8);
(b) the daily EAV of 2.5m/s2 A(8);
(ii) Whole body vibration:
a) in case of crest factor observed during the measurement of vibration is less than 9, the daily ELV
of 1.15 m/ s2 A (8) and daily EAV of 0.5m/s2 A(8),
b) in case of crest factor observed during the measurement of vibration exceeds 9, the
Vibration Dose Limit Value (VDLV) of 8.5m/s1.75A(8)and Vibration Dose Limit Value (VDLV) of
17 m1.75 A(8).
(14) The owner, agent and manager shall effectively reduce the level of exposure to vibration by
incorporating preventive measure by suitably designing work process and work station and by selecting
appropriate and properly functioning work equipment, and also suitably modifying methods and work
procedures so as to suitably reduce the risk at source by;
(a) adjustments in the light of technical progress and scientific knowledge regarding risks related
to exposure to vibration, with a view to improve the safety and health status of workers
employed in the mine.
(b) assessing the level of exposure to mechanical vibration specific to work practices as
prescribed by the Chief Inspector-cum- Facilitator by a special or general order and notified from
time to time.
(15) Where at any place smoking or un-authorised entry is prohibited, notices to that effect shall be
posted at conspicuous places at every entrance to the place.
(16) At every mineral dressing or separating plant where cyanide or other poisonous substance is used,
there shall be kept a sufficient supply of a satisfactory and efficient antidote for poisoning.
(17) Water containing poisonous or injurious matter in suspension or solution must be effectively
fenced off to prevent inadvertent access to it, and notice boards shall be put up at suitable places to
warn persons from making use of such water.
(18) In no case shall water containing any poisonous matter in suspension or solution in a dangerous
concentration be permitted to escape.
(19) Whenever any person is supplied by the owner, agent or manager of a mine with any personal
protective equipment, shall use the same while on duty.
195. Use, Supply and maintenance of protective footwear. - (1) No person shall go into, or work,
or be allowed to go into, or work in a mine, unless wears a protective footwear of such type as may be
approved by the Chief Inspector-cum-Facilitator by a general or special order.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 325
(2) The protective footwear referred to in sub-regulation (1) shall be supplied free of charge by the
owner of the mine.
196. Use and supply of helmet. - (1) No person shall go into, or work, or be allowed to go into, or
work in a mine, other than the precincts of a mine occupied by an office building, canteen, crèche, rest
shelter, first aid room or any other building of a similar type, unless wears a helmet of such type as may
be approved by the Chief Inspector-cum-Facilitator by a general or special order:
Provided that where the Chief Inspector-cum-Facilitator is of the opinion that due to special
circumstances, it is not necessary or reasonably practicable for any person or class of persons going
into, or working in a mine to wear a helmet, as may be specified, by a general or special order in writing
and subject to such conditions specify therein, exempt such person or class of persons, from the
operation of the provisions of this sub-regulation.
(2) The helmet referred to in sub-regulation (1) shall be supplied free of charge by the owner of the
mine.
197. Supply of other personal protective equipment. - (1) Where it appears to the
Regional Inspector-cum-Facilitator or the Chief Inspector-cum-Facilitator that any person or class of
persons employed in a mine is exposed to undue hazard by reason of the nature of his or her
employment, he may by a general or special order, require the owner, agent or manager of the mine to
supply to such person or class of persons, free of charge, gloves, goggles, shin guards, respirator, retro
reflective jackets, fire protective jackets or such other protective equipment as may be specified in the
order.
(2) The protective equipment provided under sub-regulation (1) shall be replaced free of charge by the
owner, agent or manager whenever it is rendered unserviceable by legitimate use:
Provided that in any other event, the replacement shall be made on payment of full cost.
(3) If any dispute arises as to the life of any protective equipment, it shall be referred to the Chief
Inspector-cum-Facilitator for decision.
198. Managers and other Officials. –
(1) No person shall be appointed as a Manager or an official in a mine unless;
(a) he or she possesses a valid first-aid certificate of the St. John Ambulance Association
(India) or any other first-aid training institute, as may be specified by the Board of Mining
Examination; and
(b) he or she is trained in handling of flame safety lamps, detection of mine gases and
precaution thereof as the prescribed vocational training under section 72 of the code,
except where his or her appointment is restricted to mines having opencast workings only.
(2) No person shall be appointed as a competent person under regulation 25, regulation 67, regulation
97, clause (a) of sub-regulation (4) of regulation 127, sub-regulation (6) of regulation 128, clause (d) of
sub-regulation (3) of regulation 136, sub-regulation (11) of regulation 144, sub-regulation (3) of326 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
regulation 146, regulation 150 and sub-regulation (1) of regulation 152 unless, he is the holder of either
a Mining Supervisor’s Certificate or a Manager’s Certificate.
(3) No person shall be appointed as a competent person under regulation 122, regulation 123,
regulation 126, sub-regulation (5) & (6) of regulation 131, regulation 133, sub-regulation (2) of
regulation 150, regulation 151 and sub-regulation (4) of regulation 160 unless, is the holder of either a
Manager’s Certificate, Mining Supervisor’s Certificate or Assistant Mining Supervisor’s Certificate.
(4) In case of mines having opencast workings only, nothing in sub-regulations (2) and (3) shall
prohibit the appointment under regulations 25, regulation 122, regulation 123, regulation 126, sub-
regulation (4) of regulation 127, sub-regulation (6) of regulation 128 and regulation 175 of a person
holding, as the case may be, an Assistant Mining Supervisor’s Certificate, Mining Supervisor’s Certificate
or Manager’s Certificate restricted to mines having opencast workings only.
(5) Notwithstanding anything contained in sub-regulation (3), the Chief Inspector-cum-Facilitator
may, where special conditions exist, permit or require appointment of any person, not necessarily
holding either a Manager’s Certificate or Mining Supervisor’s Certificate or an Assistant Mining
Supervisor’s certificate as a competent person under regulation 123, if such person possess otherwise a
suitable qualification and experience for effective supervision of the working places.
199. Writing of reports. - (1) If any person required to make any report is unable to write, the
competent person so authorised by the manager shall write the report, in physical or electronic form, on
his or her behalf and in his or her presence, and he or she shall attach his or her thumb mark to it or
sign or e-sign on it after the report is read over to him or her by the competent person.
(2) The competent person writing the report shall certify that it has been read over to the person for
whom it was written, and shall sign or e-sign the certificate and date his or her signature.
200. Payment of fees. - Any fees payable under these regulations shall be paid through electronic
mode or any other means as specified by the Chief Inspector-cum-Facilitator, from time to time by
general or special order.
201. Place of accident not to be disturbed and furnishing of report. - (1) Whenever an accident
occurs in or about a mine causing loss of life or serious bodily injury to any person, the place of accident
shall not be disturbed or altered before the arrival or without the consent of the Chief Inspector-cum-
Facilitator or the Inspector-cum-Facilitator to whom notice of the accident is required to be given under
sub-section (1) of section 10 of the Code unless such disturbance or alteration is necessary to prevent
any further accident, to remove bodies of the deceased, or to rescue any person from danger, or unless
discontinuance of work at the place of accident would seriously impede the working of the mine:
Provided that where the Chief Inspector-cum-Facilitator or the said Inspector-cum-Facilitator
fails to inspect the place of accident within seventy-two hours of the time of the accident, work may be
resumed at the place of accident.
(2) Before the place of accident involving a fatal or serious accident is disturbed or altered due to
any reason whatsoever, a sketch of the site illustrating the accident and all relevant details shall be
prepared in duplicate and such sketch shall be duly signed by the manager or assistant manager, safety[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 327
officers, surveyor and the workmen’s inspector or, where there is no workmen’s inspector by a work
person present at the place of accident, which shall also be supported by the photographs of the place
of accident:
Provided that, if the place is disturbed or altered to prevent further accident or rescue persons from
danger before the sketch could be prepared, the same shall be prepared immediately thereafter giving
all relevant details as existed before the place was disturbed or altered.
(4) One of the authenticated sketches shall be delivered or sent to the concerned Regional
Inspector-cum-Facilitator.
(5) In respect of every persons killed or received serious bodily injured as above, the owner,
agent or manager shall send particulars in the Form and method as may be specified by
the Chief Inspector for the purpose, within seven days of the occurrence, and also within
fifteen days of the injured person returning to duty.
202. Emergency response and evacuation plan. - (1) The owner, agent and manager of every
mine shall have a comprehensive programme in place to respond to any injury, illness or emergency that
may occur at each mine including foreseeable industrial and natural disasters which shall include,
immediate first-aid treatment, medical treatment, transportation and evacuation of injured persons;
procedures to respond to emergencies that arise at the mine; and make arrangements for the rescue of
persons incapacitated or trapped in mines.
(2) The plan referred to in sub-regulation (1) shall cover mine evacuations and include-
(a) establishment of individual responsibilities for administering actions identified to implement an
emergency response;
(b) establishment of emergency communication systems, procedures and individual
responsibilities for carrying out emergency communications;
(c) a system in place to provide immediate notification to all persons affected by the
emergency, including alarms in place which shall be capable of being seen and heard by
everyone affected;
(d) a procedure to allow for the safe, orderly and immediate withdrawal of persons from the
mine or area of danger, including training on emergency escape routes and procedures;
(e) procedures in place to be followed by workers who remain to perform critical operations
before they evacuate, which include:-
(i) the selection of only those personnel who have received special training to respond
to critical operations and mine emergencies, including mine fires and explosions;
(ii) having procedures in place to ensure the locations that are safe for persons who
would not be immediately withdrawn;
(iii) having the personnel equipped with the necessary gas-detection equipment and
other equipment or tools necessary to respond to the critical operation at hand;
(f) providing persons with particular risks with the equipment necessary for escape, such as
self-contained self-breathing devices etc.;
(g) a response team that is trained and equipped and immediately available to respond to fires
or other hazards that create mine emergencies;328 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(h) procedures to account for all workers after the emergency evacuation is complete;
(i) providing relevant information and training to all personnel, at all levels, including regular
exercises in emergency prevention, preparedness and response procedures and periodic
emergency drill;.
(j) mock rehearsals at regular intervals.
(3) Refuge chamber-
(i) Every belowground mine shall be provided with properly constructed and strategically located refuge
chambers of adequate capacity, so as to be readily accessible to persons employed underground in the
event of fire, explosion, irruption, roof fall, or irrespirable atmosphere where escape is not immediately
possible.
(ii) Each refuge chamber shall be air-tight and equipped with independent breathable air supply, carbon-
dioxide scrubbing arrangement, means of communication with surface, illumination, first-aid facilities
and potable water sufficient to sustain life until rescue.
(iii) The owner, agent or manager shall ensure regular inspection, maintenance and inclusion of refuge
chamber locations and procedures in the Emergency Evacuation and Response Plan.
(4) The owner, agent and manager shall submit a copy of the emergency response and evacuation plan,
to the Regional Inspector-cum-Facilitator, who may, by an order in writing, approve such action plan,
either in the form submitted or with such additions and alterations as may think fit, and the action plan
so approved shall be enforced at the mine.
(5) On receiving information of any emergency, the owner, agent and manager and in his or her
absence principal official present at the surface, shall immediately put emergency action plan in operation.
203. Taking samples from mine. - Where for official purposes, an Inspector-cum-Facilitator considers it
necessary to take samples of any mineral, mine-air, explosive materials, rope, equipment, machinery or part
thereof or any other substance, the owner, agent or manager shall make over to him or her such samples in
such quantities as may require.
204. Chief Inspector-cum-Facilitator, or authorized Inspector-cum-Facilitator to exercise
powers of Regional Inspector-cum-Facilitator. – Any power granted under these regulations to
the Regional Inspector-cum-Facilitator may be exercised by the Chief Inspector-cum-Facilitator or any
other Inspector-cum-Facilitator authorised in writing in this behalf by the Chief Inspector-cum-Facilitator.
205. Plans, sections and records. - Where special conditions exist, the Chief Inspector-cum-
Facilitator may permit preparation and maintenance of plans, sections and records required to be
maintained under the provisions of these regulations, subject to the conditions as may be specified, in
electronic form within the limits of error of survey and plotting, as specified under sub-regulation (3) of
regulation 56.[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 329
206. Reports, records and registers. - The reports, records and registers required to be maintained
under these regulations shall be maintained in interleaved bound paged registers kept for the respective
purposes and signed or by the concerned competent person or official, as the case may be and
countersigned by the manager:
Provided that in case of maintenance of reports, records and registers in electronic form, the owner,
agent and manager shall ensure that the same is digitally and not liable to alteration or tampering and
secured in such a manner as to facilitate retrieval by owner, agent, manager and the Chief Inspector-
cum-Facilitator or an Inspector-cum-Facilitator:
Provided further that the manager may authorise an assistant manager to countersign any reports,
records or register on his or her behalf, except in cases where the manager is specifically required under
these regulations to countersign a report or record or register.
207. Appeal to the Chief Inspector-cum-Facilitator. - (1) An appeal shall lie against an order
made by the Regional Inspector-cum-Facilitator under any of these regulations, to the Chief Inspector-
cum-Facilitator who may confirm, modify or cancel the order.
(2) Every appeal under sub-regulation (1) shall be preferred within fifteen days of the receipt of the
order by the aggrieved person.
208. Appeal to the Central Government. – (1) An appeal against any order made by the Chief
Inspector-cum-Facilitator under any of these regulations or against any order passed under regulation
207 shall lie, within twenty days of the receipt of the order by the aggrieved person or as the case may
be, to the Central Government.
(2) Every order of the Chief Inspector-cum-Facilitator, against which an appeal is preferred under
sub-regulation (1) shall be complied with, pending the receipt at the mine of the decision of the Central
Government:
Provided that the Central Government may, on an application by the appellant, suspend the operation of
the order appealed against, pending the disposal of the appeal.
209. Repeal and savings. - (1) The Metalliferous Mines Regulations, 1961 are hereby repealed.
(2) Notwithstanding the repeal referred to in sub-regulation (1), anything done or any action taken
under the regulations so repealed including any order or certificate issued, authorisation or permit
granted or renewed, any order or direction made thereunder or notification issued shall be deemed to
have been done or taken or issued or granted or renewed or made under the corresponding provisions
of these regulations.
(3) Save as anything contained under these regulations, any person so appointed as a mine foreman, a
mining mate, an winding engineman, a banksman or a support person, under the Metalliferous Mines
Regulations, 1961, shall each be also deemed to have been appointed as a mining supervisor, an
assistant mining supervisor, an winding engine operator, a pit top attendant or support person
respectively under these regulations.330 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
SCHEDULE
[See sub-regulation (2) of regulation 56]
CONVENTIONS FOR PREPARING PLANS AND SECTIONS
Description Symbols Remarks
Co-ordinate
In Black
Lines
Boundary of
Mining
In Dark Magenta
Lease
Hold
Mine Boundary In Red
Outcrop of
In Brown
Dyke
Subsidence of
In Red
Surface
Prohibited
Mining
In Red
Area
(a) Borehole
(Vertical)
In Red
from
Surface
(b) Boreholes
(Inclined)
In Red
From
Surface
(c) Boreholes
(Underground) In Red
(a) Shafts In Black
(b) Abandoned
In Black
Shafts[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 331
Winze According to Shape
Adit According to Shape
Cross-Cuts In Black
Levels In Black
Vertical Projection of
Under Ground In Black
Workings
(a) Packs and Sand
In Black
Filling
(b) Waste Rock Filling
In Black
(c) Granite Pack Walls In Black
(a) Fault Planes In Green
(b) Pegmatite
Intrusions In Blue
Dyke In Brown332 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Date of Last
In Black
Survey
Survey Station In Black
Bench Mark In Black
(a) Brick, Stone
or Concrete
Ventilation In Black
Stoppings
(b) Horizontal
In Black
Seals
Brattice In Red
(a) Fire Dams or
In Red
Seals, Open
(b) Fire Dams or
In Red
Seals Closed
Water Dams
In Blue
(a) Doors Open In Black
(b) Doors Closed
In Black
Regulators In Red
In Black
Air Crossings
(a) Direction of Air
In Blue
Current Intake[िाग II—खण् ि 3(i)] िारत का राजपत्र : असाधारर् 333
(b) Return In Red
Auxiliary fan In Red
Telephones In Green
Underground
ambulanc In Red
e station
Fire Refuge In Black
Chamber
Underground
In Red
Magazine
Pump Station In Blue
Outcrop Reef,
Vein, load, In Yellow
etc.
Permanent
In Black
station
[F. No. S-65025/03/2025-ISH-II]
ALOK CHANDRA, Senior Labour & Employment Advisor
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.