See Full Document Text
jftLVªh laö Mhö ,yö&33004@99 REGD. NO. D. L.-33004/99
vlk/kj.k
EXTRAORDINARY
Hkkx II—[k.M 3—mi&[k.M (i)
PART II—Section 3—Sub-section (i)
izkf/dkj ls izdkf'kr
PUBLISHED BY AUTHORITY
la- 442] ubZ fnYyh] lkseokj] twu 27] 2016@vk"kk<+ 6] 1938
No. 442] NEW DELHI, MONDAY, JUNE 27, 2016/ASADHA 6, 1938
(cid:1)(cid:1)(cid:1)(cid:1)मममम औऔऔऔरररर ररररोोोोजजजजगगगगाााारररर मममम(cid:11)(cid:11)ंं(cid:11)(cid:11)ंं ााााललललयययय
अअअअििििधधधधससससचचूूचचूू ननननाााा
नई (cid:4)द(cid:6) ली,,,, 24 जून,,,, 2016
ससससाााा....ककककाााा....ििििनननन.... 632((((अअअअ))))....—कितपय िविनयम(cid:16) का िन(cid:18)न िलिखत (cid:20)ा(cid:21)प,,,, िजस े के(cid:25) (cid:26)ीय सरकार खान अिधिनयम,,,, 1952
(1952 का 35) क(cid:28) धारा 57 (cid:31)ारा (cid:20)द त शि"य(cid:16) का (cid:20)योग करते %ए और उ) त अिधिनयम क(cid:28) धारा 12 के अधीन ग-ठत
सिमित क(cid:28) िसफा-रश(cid:16) के आधार पर और तले खान िविनयम,,,, 1984 को उन बात(cid:16) के िसवाय अिध5ांत करत े %ए,,,, िज(cid:25) ह 8 ऐस े
अिध5मण स े पहले (cid:4)कया गया ह ै या करने का लोप (cid:4)कया गया ह ै बनाने का (cid:20); ताव करती ह,,ै,, उ) त अिधिनयम क(cid:28) धारा 59
क(cid:28) उप-धारा (1) क(cid:28) अपे>ानसु ार उन सभी A यि"य(cid:16) क(cid:28) जानकारी के िलए िजनके इनसे (cid:20)भािवत होन े क(cid:28) संभावना ह ै
(cid:20)कािशत (cid:4)कया जाता ह ैऔर यह सचू ना दी जाती ह ै(cid:4)क उ)त (cid:20)ा(cid:21)प िविनयम(cid:16) पर उस तारीख से िजसको राजपE क(cid:28) (cid:20)ितयाँ,,,,
िजसम 8 यह अिधसूचना (cid:20)कािशत क(cid:28) जाती ह,,ै,, जनता को उपलG ध करवाई जाती ह,,H,, तीन मास क(cid:28) अविध क(cid:28) समािI के
पJच ात् िवचार (cid:4)कया जाएगा।
आ>ेप या सझु ाव,,,, य(cid:4)द कोई हो,,,, अवर सिचव,,,, भारत सरकार,,,, आई एस एच–II,,,, Nम और रोजगार मंEालय,,,, Nम
शि" भवन,,,, रफ(cid:28) माग,,O,, नई (cid:4)द(cid:6)ल ी –––– 110001 को भेज ेजा सक8गे।
ऐसे आ>ेप(cid:16) और सझु ाव(cid:16) पर जो उक् त (cid:20)ा(cid:21)प िविनयम(cid:16) क(cid:28) बावत (cid:4)कसी A यि" स े(cid:20)ाR त होता ह ैउपरो)त िविनSदT ट
अविध के अवसान स ेपूव,,O,, के(cid:25)(cid:26) ीय सरकार (cid:31)ारा िवचार (cid:4)कया जाएगा।
ततततेलेलेलेल खखखखाााानननन ििििववववििििननननययययमममम,,,, 2222000011116666
अअअअ(cid:15)(cid:15)(cid:15)(cid:15)ययययाााायययय ---- 1111
(cid:16)(cid:16)(cid:16)(cid:16)ााााररररिििि(cid:18)(cid:18)(cid:18)(cid:18)भभभभकककक
1111.... ससससििंंििंं(cid:22)(cid:22)(cid:22)(cid:22)(cid:23)(cid:23)(cid:23)(cid:23) ननननाााामममम,,,, (cid:16)(cid:16)(cid:16)(cid:16)ााााररररंंंंभभभभ औऔऔऔरररर ललललाााागगगगू ू ू ू हहहहोोोोननननाााा ....---- (1) इन िविनयम(cid:16) का सिं >Rत नाम तेल खान िविनयम, 2016 ह।ै
(2) ये (cid:20) य के तले खान, िजसके अंतगOत (cid:20)ाकृितक गैस खान भी ह,H पर लाग ू ह(cid:16)गे।
3206 GI/2016 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) ये राजपE म 8अिं तम (cid:20)काशन क(cid:28) तारीख को (cid:20)व ृ त ह(cid:16)ग।े
2222.... पपपप(cid:29)(cid:29)(cid:29)(cid:29)ररररभभभभााााषषषषााााएएएएँ ँ ँ ँ - इन िविनयम(cid:16) म,8 जब तक (cid:4)क संदभO स ेिभ(cid:25) न या अपेि>त न हो -
(1) "अिधिनयम" से खान अिधिनयम, 1952 (1952 का 35) अिभ(cid:20)ेत ह;ै
(2) "अ(cid:18)लीकरण" स े उ पादकता या अतं : >पे णता बढ़ान ेके उYेJ य स े अ(cid:18) ल के साथ रासायिनक अिभ(cid:4)5या (cid:31)ारा
हाइ[ोकाबOन धा-रत सरं चना को ससं ािधत करना अिभ(cid:20)ेत ह;ै
(3) "वलयाकार ;थ ान" से कूप म8 लटक(cid:28) %ई पाईप के आसपास का ;थ ान अिभ(cid:20)ेत ह ै िजसम 8 वलयाकार ;थ ान
का बाहरी दीवार एक खलु ा कूप हो सकती ह ैया यह एक Nेणीब\ वृहत् पाईप हो सकती ह।ै
(4) "Gलीड" से (cid:26)व या गैस को सामा(cid:25) यत: (cid:4)कसी वॉ(cid:6) व के मा‘यम स े बाहर िनकालना अिभ(cid:20)ते ह;ै G लीड ऑफ
करने से (cid:4)कसी कूप या दाबीकृत उप; कर के दाब क(cid:28) िनयंिEत िनमुOि" करना अिभ(cid:20)ते ह;ै
(5) "Gल ोआउट" स े(cid:4)कसी कूप म8 स ेतरल पदाथO का अचानक अिनयिं Eत उa (cid:21)प स ेबाहर िनकलना अिभ(cid:20)ेत ह;ै
(6) "Gल ोआउट (cid:20)ीव8टर" से ऐसी कोई युि" अिभ(cid:20)ते ह,ै जो य(cid:4)द (cid:4)कक या Gल ोआउट उ प (cid:25) न हो तो निलका और
केbसग के बीच या ि[ल पाइप और (cid:4)कbसग के बीच या तार-रc ज ू या निलका के बीच के वलयाकार ; थान स े
कोई तरल पदाथO के दाब को िनयंिEत करने या िछ(cid:26) म 8 कोई ि[ल पाइप या निलका न हो तो उसके
अिनयंिEत को रोकन ेके िलए मलू eोत के ऊपर लगाई जाती ह ै;
(7) "केbसग" से वेधन कायO के समय (cid:4)कसी कूप म 8 लगाई गई ; टील पाईप अिभ(cid:20)ेत ह ैजो कूप(cid:16) को धसँ ने स े और
कूप म 8(cid:26)व को वापस (cid:20)िवTट होन ेसे रोकती ह;ै
(8) "केbसगलाइन" स े इ;प ात तार का कोई र; सा अिभ(cid:20)ेत ह ै जो शीष O Gलॉक और संचारण Gलॉक के मा‘यम स े
कूप म 8पाईप(cid:16) को डालन ेऔर उठान ेके िलए उपयोग म 8लाया जाता हो;
(9) "कैट लाइन" स े कोई र;स ा अिभ(cid:20)ेत ह ै जो भ-ू तल या आधार, पाईप रैक, औजार ;थ ान या ड-े रक फशO के
कैटवॉक स े(cid:4)कसी पाईप, वेधन औजार और अ(cid:25)य उप; कर को उठान ेके िलए (cid:20)यु)त होता हो;
(10) "कैट हडे " से [ॉ-व)स O पर ; थािपत कोई यिु " अिभ(cid:20)ेत ह ैजो पाईप जोड़(cid:16) को संयोिजत या िवघ-ट त करने के
िलए या [ॉ-व)स Oपर वैjुत सहायता से कैट लाइन के (cid:20)चालन के िलए (cid:20)यु) त होता हो;
(11) "कैट वॉक" स े वह रै(cid:18)प अिभ(cid:20)ते ह ै जो -रग फशO तक वधे न पाईप, kbू बग, केbसग और वेधन या अ(cid:25)य
औजार(cid:16) के िलए रा;त ा दते ा हो;
(12) "सले र" से कूप के शीषO पर उप; कर क(cid:28) इकाईय(cid:16) के िलए ; थान उपलGध कराने के िलए ड-ेरक के नीचे का
उ ख नन अिभ(cid:20)ेत ह ैजो परव तl िनपटान के िलए फशO के नीचे जल-िनकास और अ(cid:25) य तरल पदाथ Oको इकmा
करने के िलए एक गn ेके (cid:21)प म8 भी काय Oकरता ह;ै
(13) "सीमo8 टग" से वह स(cid:4)ं 5या अिभ(cid:20)ेत ह ैिजसके (cid:31)ारा सीम8ट एवं जल के िमNण को केbसग म8 से इस (cid:20)कार पंप
(cid:31)ारा भेजा जाता ह ै (cid:4)क वह कूप के तल के ऊपर एक पूव-O िनधा-O रत ऊँचाई तक केbसग और कूप के बीच के
;थ ान को भर दते ा ह;ै
(14) "(cid:4)5समस pी" स ेतरल पदाथ Oके (cid:20)वाह को िनयिं Eत करन ेके िलए (cid:4)कसी कूप के शीष Oपर सकं िलत वॉ(cid:6) व और
(cid:4)फoटग8 अिभ(cid:20)ेत ह;ै
(15) ''कोयला परत िमथेन'' स े कोई ऐसी (cid:20)ाकृितक गसै अिभ(cid:20)ेत ह ै जो कोयले क(cid:28) सीम या समीप; थ सं; तर(cid:16) म 8
फंसी रहती ह;ै
(16) "को(cid:6)ड वकO" स े ऐसा कायO या (cid:4)5याकलाप अिभ(cid:20)ेत ह ै जो वाय-ु हाइ[ोकाबOन के एक c वलनशील िमNण को
या एक cवलनशील पदाथ Oको (cid:20)cविलत करने के िलए पयाOI ताप उ प (cid:25) न नहq करता हो;
(17) "स>म rि"" से (cid:4)कसी काय O या (cid:4)कसी मशीनरी, संयंE या उप; कर के संबधं म8 एक ऐसा rि" अिभ(cid:20)ते ह ै
िजस े उस कायO का पयOवे>ण करने या उसको करने के िलए या उस मशीनरी, संयंE या उप; कर के सं(cid:4)5या¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 3
या रख-रखाव का पयOवे>ण करने के िलए एक स>म A यि" के (cid:21)प म8 (cid:20)बंधक (cid:31)ारा स(cid:18) यक (cid:21)प से िलिखत म 8
िनयु)त (cid:4)कया गया ह ैऔर जो उसे सsप ेगए कतOr(cid:16) के िनवाOह के िलए उ त रदायी ह;ै
(18) "स(cid:18)प -ू रत कूप" स ेऐसा कूप अिभ(cid:20)ेत ह ैिजसम 8 कूप क(cid:28) पेpोिलयम धा-रत शैल-समूह या िन; सारी शलै -समहू
कूप के िलए खलु ा ह ैऔर िजस कूप म 8तथा कूप शीष Oपर सं; थािपत उप;क र ह ैिजससे (cid:4)क यह भौितक (cid:21)प स े
एक पेpोिलयम उ प ादक, अतं :>ेपक या िनपटान कूप के (cid:21)प म 8काय OिनT पा(cid:4)दत करने म8 समथO हो;
(19) ''ठेकेदार'' से कोई ऐसा Aय ि", A यि"य(cid:16) का संघ, कंपनी, फम,O ; थानीय (cid:20)ािधकार या ; थानीय िनकाय
अिभ(cid:20)ेत ह ैजो ठेके के आधार पर (cid:4)कसी तले या गसै खान म 8 सवे ाu या स(cid:4)ं 5या का िनTप ादन करता ह,ै और
इसके अंतगOत उप-ठेकेदार भी ह;ै
(20) "5ाउन Gलॉक" से ड-े रक या म; तूल के शीषO पर लगा %आ ऐसा ब%-चरखेदार सकं लन अिभ(cid:20)ेत ह ै िजसका
उपयोग कूप के वेधन या सफाई के समय उप; कर(cid:16) को उठान े व उतारने के िलए चल-Gल ॉक के साथ (cid:4)कया
जाता ह;ै
(21) "(cid:4)दवा-(cid:20)काश के घंटे" स ेसूयvदय स ेसूयाO;त तक क(cid:28) अविध अिभ(cid:20)ेत ह;ै
(22) "उप (cid:20)बंधक" से कोई ऐसा A यि" अिभ(cid:20)ेत ह ै जो इन िविनयमन(cid:16) के अधीन (cid:4)कए गए (cid:20)ावधान(cid:16) के अनसु ार
अहतO ाए ँ रखता हो और िजसे खान या उसके (cid:4)कसी भाग के िनयंEण, (cid:20)बंधन, िनदशे न और पयOवे>ण म 8
(cid:20)बंधक क(cid:28) सहायता के िलए ; वामी, अिभकता O या (cid:20)बंधक (cid:31)ारा िलिखत (cid:21)प म8 िनयु" (cid:4)कया गया ह ै और
जो (cid:20)बंधक के ठीक नीचे के दजw का ह;ै
(23) "ड-े रक" स े एक ऐसी िमिNत जालीदार संरचना अिभ(cid:20)ते ह ै िजसका उपयोग वेधन या कूप क(cid:28) सफाई करन े
के (cid:20)योजन(cid:16) के िलए कूप के ऊपर (cid:4)कया जाता ह,ै और िजसम 8एक म;त लू शािमल ह;ै
(24) ''अिभक(cid:6)प क'' स ेकोई ऐसा A यि", A यि"य(cid:16) का सघं , कंपनी या सं; थान अिभ(cid:20)ते ह ैजो तले या गसै (cid:20)णाली,
गैस खनन प\ित या तले या गैस खान(cid:16) म8 उपयोग के िलए मशीनरी, संयंE, उप;क र, सािधE या पदाथx का
अिभक(cid:6)प न करता हो;
(25) "िजला मिज;p ेट" से (cid:4)कसी खान के संबधं म,8 यथाि;थित, वह िजला मिज; pेट या आयु)त या उपायु)त
अिभ(cid:20)ेत ह,ै िजसम8 उस राज; व िजले म,8 िजसम 8 खान अवि;थत ह,ै िविध और A यव; था बनाए रखन े क(cid:28)
कायOकारी शि"या ँिनिहत ह;H
(26) "[ॉ-व)स O" स े शyै ट(cid:16), दतं च5(cid:16), चेन(cid:16), पुिलय(cid:16), बे(cid:6)ट(cid:16), ) लच(cid:16), कैट हडे (cid:16) या अ(cid:25)य यािं Eक यिु "य(cid:16) का एक
सकं लन अिभ(cid:20)ेत है िजसम 8 (cid:4)कसी कूप का वेधन करन े या उ प ादन कूप क(cid:28) सफाई करन े के िलए (cid:20)यु)त
उप;क र को उठान,े (cid:20)चािलत करने और सभं ालने के िलए िनयEं ण उपयु)त (cid:21)प से लगाए गए ह H और उनक(cid:28)
Aय व;थ ा क(cid:28) गई ह;ै
(27) "वेधन" से यािं Eक या अ(cid:25)य साधन(cid:16) (cid:31)ारा भ-ू पृT ठ म 8 िछ(cid:26)ण करना अिभ(cid:20)ते ह ै और इसके अ(cid:25)त गOत वैसे िछ(cid:26)
क(cid:28) दीवार(cid:16) को धसँ न े से रोकन े तथा वैस े िछ(cid:26) को जल सिहत बाहरी सामिaय(cid:16) स े भरन े स े बचान े के िलए
सभी सं(cid:4)5याएँ शािमल ह;H
(28) "वेधन-रग" स े बोर िछ(cid:26) ;थल पर वेधन करन े के (cid:20)योजन(cid:16) के िलए अपिे >त संपूण O संरचना और मशीनरी
अिभ(cid:20)ेत ह;ै
(29) "उ थ ापक" स े इ;प ात क(cid:28) एक ऐसी यािं Eक यिु " अिभ(cid:20)ेत ह ै िजसका उपयोग चल G लॉक स े लटके %ए
उ त ोलन ऊपर के साथ लटक(cid:28) %ई पाईप या छड़ को (cid:4)कसी कूप म 8नीचे करने या उसस ेखqचने के िलए (cid:4)कया
जाता ह;ै
(30) "आपात बचाव युि"" स ेऐसी आनत तार रcज ू अिभ(cid:20)ेत ह ैिजससे मकं (cid:28) बोड Oके ऊपर के (cid:4)कसी bबद ुस ेसरु >ा
सवारी या ;लाईड को नीच ेभ-ू ि;थरक तक ल ेजाया जाता ह;ै4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(31) "िव;फ ोट मापक मीटर" से cवलनशील गसै क(cid:28) सां(cid:26)ता को मापने का उप; कर अिभ(cid:20)ते ह;ै
(32) "िव;फोटक" का वही अथ O होगा जो भारतीय िव;फोटक अिधिनयम, 1884 (1884 का 4) म 8 उस शGद के
िलए िनयत ह;ै
(33) "cव लारोधी घरे ा" का वही अथO होगा जो के(cid:25) (cid:26)ीय िवjुत (cid:20)ािधकरण (सरु >ा एव ं िवjुत आपzू त संबिं धत
उपाय) िविनयम, 2010 के अधीन प-रभािषत ह;ै
(34) "cवलनशील" स ेऐसा पदाथO अिभ(cid:20)ेत ह,ै िजसम 8आसानी से (cid:20)cc विलत हो सकने क(cid:28) >मता ह,ै जो ती{ता के
साथ दहन हो या जो cव ाला (cid:20)सार क(cid:28) (cid:26)तु दर रखता हो;
(35) "|लशै पॉइंट" स े वह िन(cid:18)न तम तापमान अिभ(cid:20)ेत ह ै िजस पर कोई पेpोिलयम तरल हवा के साथ
cव लनशील िमNण बनाने के िलए पयाIO सा(cid:25) (cid:26)ता म8 वाT प उ प(cid:25) न करता हो और वह आईएस: 1448
(भाग-I) या उसके संशोिधत (cid:21)प के अनुसार परी>ण क(cid:28) िविनSदT ट प-रि;थितय(cid:16) के अधीन एक लघ ु
आरंिभक cव ाला के (cid:20)योग पर एक >िणक (cid:20)काश (cid:20)दzशत करता ह;ै
(36) "yलेयर" स े ऐसी cव ाला अिभ(cid:20)ते ह ैिजसका उपयोग (cid:20)(cid:4)5या क(cid:28) आवJयकता के अनसु ार गसै के िनपटान के
िलए (cid:4)कया जाता ह;ै
(37) "yलोर Gलॉक" से तलीय ;त र पर या तल के िनकट ; थािपत एक एकल चरखीनमु ा पलु ी या bखचाई Gलॉक
अिभ(cid:20)ेत ह ैिजसके सहारे र; सी पर bखचाई क(cid:28) (cid:4)दशा बदली जा सकती ह;ै
(38) "(cid:20)(cid:21)प'' से इन िविनयम(cid:16) के अधीन मु} य िनरी>क (cid:31)ारा िविनSदT ट (cid:20)(cid:21)प अिभ(cid:20)ते ह;ै
(39) ''िवभंग" से (cid:20)वाह मागO खोलने के िलए (cid:4)कसी तरल पदाथO को अध;त ल ; तर के (cid:20)वेश कराने क(cid:28) (cid:20)(cid:4)5या
अिभ(cid:20)ेत ह;ै
(40) ''गैस'' से पेpोिलयम म 8उपि;थत या A य ु प(cid:25)न हाइ[ोकाबनO क(cid:28) वाT प ि;थित अिभ(cid:20)ेत ह ैऔर िजसम 8(cid:20)ाकृितक
गैस शािमल ह;ै
(41) "गैस म"ु " से एक ऐसा वातावरण अिभ(cid:20)ते ह ैिजसम 8–
(i) cवलनशील गसै क(cid:28) (cid:20)ितशतता, के(cid:25) (cid:26)ीय िवjुत (cid:20)ािधकरण (सुर>ा एवं िवjतु आपूzत संबंिधत
उपाय) िविनयम, 2010 के अधीन, ऐसी गैस क(cid:28) उपि;थित म8 िवjुत आपzू त को िवयोिजत करन े
हते ु िविनSदTट सीमा स ेअिधक न हो;
(ii) ऑ)सीजन क(cid:28) (cid:20)ितशतता उ(cid:25) नीस से कम न हो; और
(iii) हािनकारक गैस 8 तले उjोग सरु >ा िनदशे ालय के मानक, OISD-STD - 114 या उसके संशोिधत
(cid:21)प के अनसु ार िविनSदT ट अनु(cid:127)ेय सीमा के भीतर हो;
(42) "गैस कूप" स ेऐसा कूप अिभ(cid:20)ेत ह ैिजसस े(cid:4)कसी गसै धारक जोन स ेिनर(cid:25)त र उ पादन होता रहता ह ैया ऐसा
कूप िजसम 8केbसग गैस के िनर(cid:25)त र उ प ादन के िलए चलाया जाता ह;ै
(43) "जोिखममय >ेE" स ेऐसा >ेE अिभ(cid:20)ते ह ैजहाँ जोिखममय वातावरण मौजूद ह ैया उसके होन ेक(cid:28) सभं ावना
ह;ै
(44) "जोिखममय वातावरण" से ऐसा वातावरण अिभ(cid:20)ते ह ै िजसम8 उतनी सा(cid:25) (cid:26)ता म 8 कोई cवलनशील गैस
उपि;थत ह ै जो (cid:20)cव लन के िलए स>म ह ै या िजसम 8 हािनकारक गसै 8 तले उjोग सुर>ा िनदशे ालय के
मानक, OISD-STD -114 या उसके संशोिधत (cid:21)प के अनसु ार िविनSदT ट अनु(cid:127)ेय सीमा स े अिधक मौजूद
ह(cid:16);¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 5
(45) "हॉट वकO" स ेऐसा कायO या (cid:4)5याकलाप अिभ(cid:20)ेत ह ैजो, ऐस े;थ ान पर जहा ँc वलनशील वाT प, गैस(cid:16) या धलू
क(cid:28) मौजूदगी सभं ािवत हो, (cid:20)cवलन के िलए पयाOI ऊजा O क(cid:28) िचनगारी या c वाला या cव लन का अ(cid:25) य eोत
उ प (cid:25)न कर सकता ह;ै
(46) "सं;थापन" स े कोई ऐसा ि;थर ढ़ाँचा या संरचना या जलयान या उसका कोई भाग अिभ(cid:20)ेत ह ैिजसे खान के
भीतर पेpोिलयम या (cid:20)ाकृितक गैस के अ(cid:25) वेषण या समपु योजन के संबंध म 8 या ऐसे समुपयोजन, उ पादन,
भंडारण या प-रवहन क(cid:28) दिृ(cid:128) से अनरु ि>त (cid:4)कया गया ह ैया ; थािपत (cid:4)कया जाना ह;ै
(47) "सं;थापन (cid:20)बंधक" स ेखान के ;व ामी, अिभकता Oया (cid:20)बंधक (cid:31)ारा िलिखत म 8िनयु) त (cid:4)कया गया ऐसा A यि"
अिभ(cid:20)ेत ह ै जो, सं;थ ापन के या उसके सबं ंध म 8 सभी स(cid:4)ं 5याu और (cid:4)5याकलाप का भारसाधक ह ै और
उनके िलए उ त रदायी ह;ै
(48) "आयनकारी िव(cid:4)करण" से (cid:4)कसी रेिडयाएिै )टव पदाथO के परमाणु (cid:25)य ुि)लअस के ; वत: िवदाटी िवखंडन के
कारण ऐसा उ स जनO अिभ(cid:20)ेत ह ैजो ; वा; (cid:129) य के िलए जोिखम वाला ह;ै
(49) "(cid:4)कक" से वेधन (cid:4)कए जाने पर कूप म8 (cid:20)वेश करने वाले शैल-समूह तरल पदाथx के अंतOवाह स े भा-रत लघ ु
अविध का कोई अचानक दाब (cid:20)ो क ष Oअिभ(cid:20)ते ह;ै
(50) "केली कॉक" स ेघृणlमान और केली या केली और वेधन पाईप के बीच सं; थािपत कोई वॉ(cid:6) व अिभ(cid:20)ते ह ै जो
तरल पदाथx के उ(cid:130)च दाब पJच (cid:20)वाह के घ-टत होने क(cid:28) दशा म 8 दाब को िनयंिEत करन े के िलए, और
घृणlमान एव ंघृणl होज पर से दाब को दरू रखन ेके िलए होता ह;ै
(51) "उ थ ापन उप;क र" स े >ैितज गित के साथ उसके िबना कोई संयु) त इकाई अिभ(cid:20)ते ह,ै िजसका उपयोग
माल के उ थापन या उस ेनीच ेभेजन ेके िलए (cid:4)कया जाता ह;ै
(52) "उ थ ापन िगयर" से (cid:4)कसी उ थापन उप; कर के भारण %क पर रखा जान े वाला (cid:20) य ेक (cid:4)क; म का उप; कर
अिभ(cid:20)ेत ह ैऔर इसम 8धारक-पाE, इ; पात टोकरी, िलbyटग योक, म(cid:6) टी–b;लग या चेन या तार शािमल ह;H
(53) "आवासीय िनवास" स े सं;थ ापन का वह भाग अिभ(cid:20)ते ह ै जहा ँ काzमक(cid:16) के आवासीय क>, स(cid:18)मेलन क>,
पोत और कायाOलय होते ह;H
(54) "(cid:6)य िू (cid:131)केटर" स े (cid:4)5समस pी के शीषO पर ; थािपत एक यिु " अिभ(cid:20)ेत ह ैिजसके ऊपरी छोर पर एक दाब बंद
करने वाली यिु " क(cid:28) Aय व; था इसिलए क(cid:28) गई होती ह ै ता(cid:4)क वह कूप के अ(cid:25) दर जाने वाल े वायर-लाइन या
औजार(cid:16) से जुड़ ेअ(cid:25)य संबिं धत उपकरण(cid:16) को (cid:20)भावी (cid:21)प स ेबंद करने म8 समथO हो सके;
(55) "मशीनरी" से अिभ(cid:20)ते ह ै-
(क) वेधन उ प ादन और प-रवहन स(cid:4)ं 5याu के संबंध म8 उपयोग म8 लाया जाने वाला या ऐस े उपयोग
के िलए आशियत, कोई ि;थर या सुवा(cid:132) इंजन, वायु या गैस सपं ीडक, वायलन या वाT प सािधE; या
(ख) ऊजाO का िवकास करन,े संचयन करन,े पारेषण करन,े संप-रवतOन करने या उपयोग करने के िलए
आशियत कोई सािधE साधन या सािधE(cid:16) का समु(cid:130)च य; या
(ग) कोई ऐसा सािधE, साधन या सािधE(cid:16) का समु(cid:130) चय, य(cid:4)द इनके (cid:31)ारा िवकिसत, संचिलत,
पारेिषत, संप-रवzतत या उपयोिजत (cid:4)कसी शि" का उपयोग खनन् स(cid:4)ं 5याu के संबधं म8 (cid:4)कया गया ह ै या
ऐसा उपयोग (cid:4)कए जाने के िलए आशियत ह;ै
(56) "बड़ी दघु Oटना" से ऐसी घटना अिभ(cid:20)ते ह,ै िजसम8 खास तौर पर वेधन क(cid:28) (cid:20)(cid:4)5या के दौरान अिनयिं Eत
िवकास स े और पेpोिलयम के उ पादन, भंडारण, संचालन या प-रवहन के दौरान भारी अि(cid:133) उ स जनO या
िव;फ ोट शािमल ह,ै या मशीनरी के सचं ारण या प-रवहन या (cid:20)ाकृितक घटनाu के कारण गभं ीर (cid:20)भाव %ए6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
ह(cid:16) (सं;थ ापन के भीतर या बाहर, त काल और िवलंिबत दोन(cid:16) (cid:20)कार से) िजससे जीवन या सपं ि(cid:134) का भारी
नुकसान हो या होन ेक(cid:28) सभं ावना हो;
(57) "बड़ी आग" स ेकोई ऐसी आग अिभ(cid:20)ते ह,ै जो पं(cid:26)ह िमनट के अ(cid:25) दर नहq बझु ाई जाए;
(58) ‘’(cid:20)बंधक’’ से िविनयम 14 के अधीन िनय)ु त कोई (cid:20)बंधक अिभ(cid:20)ेत ह;ै
(59) "िविनमाOता" से कोई ऐसा A यि", A यि"य(cid:16) का संघ, कंपनी या सं; था अिभ(cid:20)ेत ह ै जो तले एव ं गैस खान(cid:16) म 8
उपयोग के िलए मशीनरी, संयEं , उप;क र, सािधE या सामaी का िविनमाOण करता हो;
(60) "मंक(cid:28) बोड"O से ड-े रक फशO के ऊपर ;थ ािपत एक ऐसा चल या ि;थर Rल ेटफाम O अिभ(cid:20)ेत ह ैिजस पर कायOरत
Aय ि" डे-रक पर रखी %ई पाइप(cid:16) या अ(cid:25) य उप; कर को सभं ालने के िलए खड़ ेहोते ह;H
(61) "पकं (मड)" से ऐसा (cid:26)व अिभ(cid:20)ते ह ैिजसे वेधन या वकO ओवर सं(cid:4)5याu के दौरान या अ;थ ायी बंदी क(cid:28) दशा
म8 कूप के (cid:31)ारा ऐसे प-रसंचरण (cid:4)कया जाता ह ै िजसस े (cid:4)क तरल ; तंभ का (cid:26)व ; थैितक दाब कूप शीष O पर
पेpोिलयम का >रण रोकन ेके शैल-समूह दाब को अितसतं ुलन करे;
(62) "मड टंक(cid:28)" से ऐसा कुंड या टंक(cid:28) अिभ(cid:20)ेत ह ैिजसके (cid:31)ारा वेधन पकं को रेत सु(cid:136) म अवसाद(cid:16) क(cid:28) नीचे बैठ जान े
के िलए च(cid:4)5त (cid:4)कया जाता ह ैजहाँ तरल पदाथO को कूप म8 दोबारा प(cid:18) प (cid:4)कए जाने स ेपहले अ; थायी (cid:21)प स े
संिचत (cid:4)कया जाता ह;ै
(63) "मड पंप" स े कोई ऐसा पंप अिभ(cid:20)ेत ह,ै िजसका उपयोग (cid:4)कसी वेधन -रग या वकOओवर -रग पर पंक (मड)
अथवा कूप (cid:26)व को प-रसंचलन करने के िलए (cid:4)कया जाता ह;ै
(64) "पदधारी" स े ऐसा Aय ि" अिभ(cid:20)ेत ह ै जो ; वामी, अिभकता O या (cid:20)बंधक (cid:31)ारा खान, या उसके (cid:4)कसी भाग म 8
पयOवे>ण के कतOAय (cid:16) का पालन करन े के िलए िलिखत म 8 िनयु) त (cid:4)कया गया है और इसके अ(cid:25)त गOत उप-
(cid:20)बंधक, सं;थ ापन (cid:20)बंधक, सुर>ा अिधकारी, अि(cid:133) शमन अिधकारी और सवw>क ह;H
(65) "तेल >ेE" स े तले >ेE (िविनयम और िवकास) अिधिनयम, 1948 (1948 का 53) म 8 यथा प-रभािषत तले
>ेE अिभ(cid:20)ेत ह;ै
(66) "तेल >ेE पाईप लाइन" स े कोई ऐसा पाईप लाइन या पाईप लाइन तंE (नेटवकO) अिभ(cid:20)ेत ह,ै जो (cid:4)कसी तले
>ेE म8 पेpोिलयम या अ(cid:25)य व;तuु के प-रवहन के िलए उपयोग म8 लाया जाता हो;
(67) "तेल कूप" स े कोई ऐसा कूप अिभ(cid:20)ते ह ै जो पेpोिलयम का उ पादन कर रहा हो या िजसक(cid:28) पेpोिलयम
उ पादन करन ेक(cid:28) >मता हो;
(68) "आउट-लाइन" स े कोई ऐसी र; सी अिभ(cid:20)ते ह,ै जो ड-े रक स े ड-े रक-मागO तक या ड-े रक के बाहर (cid:4)कसी अ(cid:25)य
;थान तक पाईप(cid:16), वेधन औजार(cid:16) या अ(cid:25)य उपकरण(cid:16) के वहन के िलए उपयोग म 8लाया जाता हो;
(69) "पेpोिलयम" स ेमु)त अव;थ ा म 8(cid:20)ाकृितक (cid:21)प स ेपाए जान ेवाले हाइ[ोकाबOन अिभ(cid:20)ेत ह ैजो चाह े(cid:20)ाकृितक
गैस के (cid:21)प म 8 हो या एक तरल, लसीला अथवा ठोस के (cid:21)प म,8 परंतु इसम 8 पेpोिलयम के साथ संयु) त
हीिलयम शािमल नहq ह;ै
(70) "पाईप रैक" स े -रग yलोर के ;त र स े लगी %ई (cid:4)क(cid:25) त ु (cid:20)ाय: उसस े नीच,े अवि;थत सरं चना अिभ(cid:20)ेत ह ै िजस
पर पाईप या केbसग को संिचत (cid:4)कया जा सकेगा या रखा जा सकेगा;
(71) "मंच" स े Aय ि"य(cid:16) का कायOकरण ; थान अिभ(cid:20)ेत ह,ै जो मशीनरी और उप;क र के (cid:20)चालन के िलए (cid:20)ितवेशी
yलोर या भिू म या समु(cid:26) के ऊपर उठा रहता ह;ै
(72) "रेक पर रखा जाना" ड-े रक या दडं पर खड़ े या पाईप रेक पर सिं चत निलकाकार माल या छड़(cid:16) के (cid:20)ित
िनदशw ह;ै¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 7
(73) "रे(cid:137)कग मंच" से ऊँचाई पर के ड-े रक या दडं म8 का मंच अिभ(cid:20)ेत ह ै जहाँ सामा(cid:25) यतया ड-े रक मैन म8 रेक पर
रखी गई पाईप(cid:16) को सभं ालने के िलए अपे>ा क(cid:28) जाती ह;ै
(74) "रेल" स ेरेल अिधिनयम, 1989 (1989 का 24) म8 यथा प-रभािषत रेल अिभ(cid:20)ते ह;ै
(75) ">ेEीय िनरी>क" स े ऐस े (cid:20)दशे या ; थानीय >ेE या >Eे (cid:16) का िजसम8 खान ि;थत ह,ै या खान(cid:16) के ऐस े समूह
या वगO का, िजस समूह या वग O क(cid:28) वह खान ह ै िजस पर वह अिधिनयम के अधीन अपनी शि" का (cid:20)योग
करता ह,ै भारसाधक खान िनरी>क अिभ(cid:20)ेत ह;ै
(76) "-रग खड़ा करना" स े वेधन अथवा वकOओवर स(cid:4)ं 5याu के आरंभ स े पूवO वेधन या वकOओवर -रग और
सहायक उप;क र का सकं लन कायO अिभ(cid:20)ते है, और इसम 8उ थापन तथा ;थ ापन भी शािमल ह;H
(77) "नदी" से कोई जल-धारा या जल-(cid:20)वाह अिभ(cid:20)ते ह,ै चाह े वह मौसमी हो या िनरंतर बहनेवाली, और इसके
अ(cid:25)त गOत (cid:127)ात उ(cid:130)च तम बाढ़ ; तर तक के उसके तट भी शािमल ह;H
(78) "घुणl होज" से ऐसा होज अिभ(cid:20)ेत ह ै जो ;ट 8ड पाईप से घणृ Oमान और कैली तक प-रसंचारी तरल का
संचालन करता ह;ै
(79) "घुणl टेबल" से मु}य त: बेधन b;टग को घमु ाने के िलए (cid:20)यु)त -रग yलोर पर शि" (cid:20)चािलत घूणनO टेबल
अिभ(cid:20)ेत ह;ै
(80) "सरु >ा (cid:20)बंधन (cid:20)णाली" स,े सामूिहक (cid:21)प स,े (cid:20)बंधन (cid:20)णाली म8 व े त व अिभ(cid:20)ेत ह H जो (cid:4)कसी खतरे को
पहचानने या उसके मू(cid:6)य ांकन या िनयंEण करने के िलए या उसस ेिनपटने के िलए लागू (cid:4)कए जाते ह;H
(81) "अनसु ूची" स ेइन िविनयम(cid:16) स ेसंल(cid:138) न कोई अनसु चू ी अिभ(cid:20)ते ह;ै
(82) ";ट Hड" स े पाईप(cid:16) के ऐसे स)े शन अिभ(cid:20)ेत ह ै िजनक(cid:28) ल(cid:18) बाई दो या अिधक पाईप(cid:16) को जोड़कर बनी ह ै और
जो ड-े रक म 8रैक पर रख ेगए ह;H
(83) "मानक रेbलग" से Aय ि"य(cid:16) के िगरने स े रोकन े के िलए yलोर क(cid:28) खुली जगह, दीवाल क(cid:28) खलु ी जगह, रै(cid:18)प
मंच या पैदल-मागO के खुल े(cid:4)कनार(cid:16) के साथ-साथ बने अ‘ वाOधर रोक अिभ(cid:20)ेत ह;ै
(84) "उप सरं चना" स ेवह नqव (आधार) अिभ(cid:20)ते ह ैिजस पर सामा(cid:25)य तया ड-े रक और इंजन बैठाए जात ेह;H
(85) "आपzू तकता"O से कोई ऐसा A यि", A यि"य(cid:16) का संघ, कंपनी या सं; था अिभ(cid:20)ते ह ैजो तले या गैस क(cid:28) खान(cid:16)
म8 उपयोग के िलए (cid:20)ौjोिगक(cid:28), मशीनरी, संयंE, उप;क र, सािधE या सामaी (सामिaय(cid:16)) क(cid:28) आपzू त करता
हो;
(86) "सतही आवरण" से अदढ़ृ ीकृत शैल-समूह(cid:16) को ढ़ँकने का ऐसा आवरण अिभ(cid:20)ेत ह,ै जो िछछले गैस (cid:20)वाह के
िव(cid:21)\ सरं >ण (cid:20)दान करने के िलए, जलधारक शलै -समूह(cid:16) को सील बंद करने के िलए, संदषू ण स ेताजे जल
के सरं >ण के िलए, गवा ं (cid:4)दए गए प-रसंचरण >ेE(cid:16) के िलए तथा कूपशीष O के िलए संरचना म क आधार
(cid:20)दान करने के िलए होता ह;ै
(87) ";व ाbबग" से तार रcज ूपर क(cid:28) सं(cid:4)5यण स,े जब कूप सामा(cid:25) य (cid:21)प स ेन बह रहा हो, तब, तरल को सतह पर
लाने क(cid:28) स(cid:4)ं 5या अिभ(cid:20)ते ह;ै
(88) ''टो बोड'O' से सामaी को िगरन े से रोकने के िलए yलोर क(cid:28) खलु ी जगह, मंच, पैदल-मागO या रै(cid:18) प के खुल े
(cid:4)कनार(cid:16) के साथ-साथ बने yलोर ; तर पर अ‘ वाधO र रोक अिभ(cid:20)ेत ह;ै
(89) ''िवषैली धलू या गैस'' स े ऐसी कोई धूल या गैस अिभ(cid:20)ेत ह ैिजसस े एक या एक स ेअिधक शारी-रक तंE क(cid:28)
सामा(cid:25)य शारी-रक (cid:20)(cid:4)5या म 8प-रवतOनीय या अप-रवतनO ीय गड़बड़ी हो सकती ह;ै
(90) ''चल Gल ॉक'' से वधे नb;pग, केbसग, निलका छड़(cid:16) और अ(cid:25) य औजार(cid:16) को ऊपर उठान ेऔर नीच ेकरने के िलए
ि;थर 5ाउान Gल ॉक के साथ (cid:20)यु) त ब% चरखीदार पलु ी G लॉक अिभ(cid:20)ेत ह;ै8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(91) "कूप" स ेअिभ(cid:20)ेत ह ैभ-ू पृTठ म 8-
(क) वेधन या बोoरग या (cid:4)कसी अ(cid:25)य रीित स े (cid:4)कया गया या (cid:4)कया जा रहा िछ(cid:139) िजससे कोई पेpोिलयम
या (cid:20)ाकृितक गैस (cid:20)ाRत क(cid:28) जाती ह ैया (cid:20)ाR त होता ह ैया पेpोिलयम या (cid:20)ाकृितक गैस (cid:20)ाR त करने के (cid:20)योजन
के िलए ह;ै
(ख) जल (cid:20)ाRत करन े के (cid:20)योजन के िलए अ(cid:25) त: >ेपण करन े या (cid:20)ाकृितक गसै , वाय ु जल या (cid:4)कसी अ(cid:25)य
पदाथO को भूिमगत शलै -समूह म8 अ(cid:25) त: >पे ण करने के िलए उपयोग (cid:4)कया गया, वेधन (cid:4)कया गया ह ै या
वेधन (cid:4)कया जा रहा िछ(cid:26) या कोई िछ(cid:26) अिभ(cid:20)ेत ह;ै
(92) "कूप शीष"O से कूप केbसग Nृंखला के शीषO पर िनकािसय(cid:16) और वा(cid:6) व(cid:16) सिहत तरल पदाथx के बहाव को
िनयिं Eत करने के िलए संयोजन अिभ(cid:20)ेत ह;ै
(93) "कूप िछ(cid:26)ण" स े कूप केbसग या kुbबग या सीमे(cid:25) ट म8 िछ(cid:26)ण करना अिभ(cid:20)ेत ह ै िजसस े (cid:4)क उ पादन या
परी>ण के िलए या कूप सं(cid:4)5यण के (cid:20)योजन के िलए (cid:20)वाह मागO क(cid:28) A यव; था हो सके;
(94) "कूप सzवbसग" स े कूप म 8 एक या अिधक (cid:20)कार के सधु ारा मक सं(cid:4)5याए ँ अिभ(cid:20)ते ह ै िजनका उYेJ य (cid:4)कसी
वकO ओवर या उप;क र को आविे (cid:128)त (cid:4)कए िबना उ पादन (cid:4)फर स ेचालू करना या बढ़ाना ह;ै
(95) "वकO ओवर" से (cid:4)कसी कूप पर उ प ादन को (cid:4)फर से चालू करन े या बढ़ान े के उYेJ य स े एक या एक से अिधक
(cid:20)कार क(cid:28) सुधारा म क सं(cid:4)5याu का (cid:4)कया जाना अिभ(cid:20)ेत ह;ै
(96) ‘जोन "0" जोिखममय >Eे ’ से वह >ेE अिभ(cid:20)ते ह ैजहा ँजोिखममय वातावरण िनरंतर मौजदू रहता ह;ै
(97) ‘जोन ''1'' जोिखममय >ेE’ स े वह >ेE अिभ(cid:20)ेत ह ै जहा ँ सामा(cid:25) य स(cid:4)ं 5या म क शतx के अधीन रहत े %ए
जोिखममय वातावरण पाए जाने क(cid:28) सभं ावना ह;ै
(98) ‘जोन "2" जोिखममय >ेE’स े वह >ेE अिभ(cid:20)ते ह ै जहाँ केवल असामा(cid:25) य स(cid:4)ं 5या मक शतx के अधीन
जोिखममय वातावरण पाए जाने क(cid:28) सभं ावना ह।ै
अअअअ(cid:15)(cid:15)(cid:15)(cid:15)ययययाााायययय---- 2222
ििििववववववववररररििििणणणणययययाााा,,ँँ,,ँँ ससससचचचूूचूू ननननााााएएएएँँ ँ ँ औऔऔऔरररर ररररेेेेखखखखााााकककंंकंं
3333.... आआआआररररंंंििंििभभभभकककक ससससचचूूचचूू ननननाााा ....---- (1) अिधिनयम क(cid:28) धारा 16 के अधीन (cid:4)कसी खनन स(cid:4)ं 5या के (cid:20)ार(cid:18) भ क(cid:28) सूचना, इस (cid:20)योजन के
िलए म}ु य िनरी>क (cid:31)ारा िविनSदTट (cid:20)(cid:21)प और प\ित म,8 िजसके साथ सं;थ ापन(cid:16) तथा बिह; तल क(cid:28) अ(cid:25)य (cid:20)मखु और
;थ ायी िविशTट ताu के ;थ ान(cid:16) को शािमल करते %ए खान क(cid:28) भौगोिलक सीमाu को दशाOनेवाला एक रेखांक और
िविनयम 131 के अधीन तैयार (cid:4)कए गए सरु >ा (cid:20)बधं न योजना क(cid:28) एक (cid:20)ित संल(cid:138)न हो, मु} य िनरी>क और >ेEीय
िनरी>क को (cid:20);त तु क(cid:28) जाएगी।
(2) जब कोई खान खोली जा चुक(cid:28) हो, तो खान ; वामी, अिभकता O या (cid:20)बंधक, खान के खलु ने क(cid:28) वा;तिवक तारीख के
बारे म 8मु}य िनरी>क, >ेEीय िनरी>क और िजला मिज;pेट को सिू चत करेगा:
पर(cid:25)त ु खनन् >ेE म8 खान म8 कोई नए कूप के वधे न या (cid:4)कसी कूप म8 वकO ओवर िनTप ादन संबंधी (cid:4)5याकलाप क(cid:28) दशा
म8, इस िविनयम के अधीन एक नई सूचना िनवे(cid:4)दत करन े क(cid:28) आवJ यकता नहq ह,ै (cid:4)क(cid:25)त ु वष O के आरंभ म 8 खान म 8 वेधन
और वकO ओवर योजना को िनवे(cid:4)दत (cid:4)कया जाएगा और त पJ चात ् वाzषक िववरणी के साथ >ेEीय िनरी>क को वधे न
तथा वकO ओवर योजना के सदं भO म 8वा;तिवक वेिधत कूप(cid:16) के बारे म 8सूिचत (cid:4)कया जाएगा।
4444.... ववववाााा""""षषषषकककक ििििववववववववररररििििणणणणययययाााा ँँ ँँ....---- (1) (cid:20) य ेक वष O फरवरी के (cid:20)थम (cid:4)दवस को या उसके पूवO ; वामी, अिभकता O या (cid:20)बंधक पूवOवतl वष O
क(cid:28) बावत,् इस (cid:20)योजन के िलए म}ु य िनरी>क (cid:31)ारा िविनSदTट (cid:20)(cid:21)प और प\ित म,8 वाzषक िवव रिणयाँ म}ु य िनरी>क,
>ेEीय िनरी>क और िजला मिज;p ेट को (cid:20);त ुत करेगा।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 9
(2) य(cid:4)द कोई खान प-र य )त या ब(cid:25)द कर दी जाती ह ै या उसम 8 चार मास स े अिधक क(cid:28) अविध के िलए काम ; थिगत
रखा जाता ह ै या खान का ;व ािम व प-रवzतत हो जाता ह,ै तो उप-िविनयम (1) के अधीन अपिे >त िववरिणया,ँ
यथाि;थित, प-र य ाग या ब(cid:25)द या ;व ािम व प-रवतOन स े 30 (cid:4)दन अथवा काम ;थ िगत (cid:4)कए जाने से पाँच मास के भीतर,
(cid:20);त ुत क(cid:28) जाएगी।
5555.... पपपप(cid:29)(cid:29)(cid:29)(cid:29)ररररतततत यय् ् य य् ् ाााागगगग,,,, बबबब’’’’दद दद अअअअथथथथववववाााा ककककाााायययय ** ** ++++थथथ थ ििििगगगगतततत ककककररररनननन ेे ेे कककक---- ययययाााा पपपपननुुननुु :::: आआआआररररंंंभभंभभ ककककररररनननन ेे ेे कककक---- ससससचचचूूचूू ननननाााा ....---- (1) जब (cid:4)कसी खान या खनन का
प-र य ाग अथवा ब(cid:25)द करना या उसका कायO चार मास से अिधक अविध के िलए ; थिगत कर दने ा आशियत हो, तो उसका
;व ामी, अिभकताO या (cid:20)बंधक, ऐसे प-र य ाग अथवा ब(cid:25) द करने या कायO ; थिगत करने के कम से कम 30 (cid:4)दन पूवO मु}य
िनरी>क, >ेEीय िनरी>क और िजला मिज; pेट को, इस (cid:20)योजन के िलए मु}य िनरी>क (cid:31)ारा िविनSदT ट (cid:20)(cid:21)प और
प\ित म,8 सूचना देगा, िजसम 8 उस (cid:20);त ािवत प-र य ाग अथवा ब(cid:25) द या कायO ; थिगत करने के कारण(cid:16) का तथा उसस े
(cid:20)भािवत होन ेवाले Aय ि"य(cid:16) क(cid:28) सभं ाAय सं} या का उ(cid:6) (cid:6) ेख करेगा।
पर(cid:25)त ु य(cid:4)द उपरो)त सूचना दने े से पहले (cid:4)क(cid:25) हq अदJृ य प-रि;थितय(cid:16) के फल; व(cid:21)प कोई खान चार मास स े अिधक
अविध के िलए प-र य )त , ब(cid:25)द या उसम 8काम ; थिगत (cid:4)कया जाता ह,ै तब उस अव; था म8 यह सचू ना त क ाल दी जाएगी।
(2) जब (cid:4)कसी खान को प-र य )त या बंद कर (cid:4)दया जाए, या जब उसका काय O चार मास क(cid:28) अविध से अिधक बंद कर
(cid:4)दया जाए, तो ;व ामी, अिभकता O या (cid:20)बंधक प-र याग अथवा ब(cid:25) द के या उ) त अविध क(cid:28) समािI के चौदह (cid:4)दन के भीतर
मु}य िनरी>क, >ेEीय िनरी>क और िजला मिज; pेट को, इस (cid:20)योजन के िलए मु} य िनरी>क (cid:31)ारा िविनSदT ट (cid:20)(cid:21)प और
प\ित म,8 सूचना देगा।
(3) जब प-र य ाग अथवा बंद के बाद या चार मास क(cid:28) अविध से अिधक समय तक कायO ; थिगत रखने के बाद (cid:4)कसी
खान या खनन को पुन: आरंभ करना आशियत हो, तो ; वामी, अिभकता O या (cid:20)बंधक खनन सं(cid:4)5या को पनु : चालू करन ेस े
कम स े कम 30 (cid:4)दन पूव O मु}य िनरी>क, >ेEीय िनरी>क और िजला मिज; pेट को, इस (cid:20)योजन के िलए मु} य िनरी>क
(cid:31)ारा िविनSदTट (cid:20)(cid:21)प और प\ित म,8 सूचना देगा।
(4) जब कोई खान पनु : आरंभ कर ली गई हो, तब खान का ; वामी, अिभकता O या (cid:20)बंधक पुन: आरंभ करने क(cid:28)
वा;त िवक तारीख मु}य िनरी>क, >ेEीय िनरी>क और िजला मिज; pेट को त क ाल ससं िू चत करेगा।
6666.... ++++ववववााााििििमममम2222वववव मममम 33 33पपपप(cid:29)(cid:29)(cid:29)(cid:29)ररररववववततततनन**नन** औऔऔऔरररर ििििननननययययििुुििुु4444,,,, जजजजससससैैैै ेे ेेअअअअििििभभभभककककतततताााा ** ** औऔऔऔरररर (cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं कककक,,,, कककक---- ससससचचूूचचूू ननननाााा ....---- (1) (क) जब खान के नाम या ; वािम व म 8
या ;व ामी के पत ेम8 कोई प-रवतनO हो, तो ; वामी, अिभकताO या (cid:20)बंधक ऐसे प-रवतOन क(cid:28) तारीख से चौदह (cid:4)दन के भीतर
मु}य िनरी>क और >ेEीय िनरी>क को, इस (cid:20)योजन के िलए मु} य िनरी>क (cid:31)ारा िविनSदT ट (cid:20)(cid:21)प और प\ित म,8
सूचना दगे ा :
पर(cid:25)त ु जहा ँखान का ;व ामी कोई फमO या Aय ि"य(cid:16) का अ(cid:25) य सघं ह,ै वहा ँ–
(i) फमO क(cid:28) दशा म,8 (cid:4)कसी भागीदार का प-रवतOन;
(ii) संघ क(cid:28) दशा म,8 (cid:4)कसी सद;य का प-रवतOन;
(iii) पिGलक कंपनी क(cid:28) दशा म,8 (cid:4)कसी िनदशे क का प-रवतनO ; या
(iv) (cid:20)ाइवेट कंपनी क(cid:28) दशा म,8 (cid:4)कसी शेयर धारक का प-रवतOन,
क(cid:28) भी सूचना ऐस ेप-रवतनO क(cid:28) तारीख से चौदह (cid:4)दन के भीतर म}ु य िनरी>क और >Eे ीय िनरी>क को दी जाएगी।
(ख) जब (cid:4)कसी खान का ;व ािम व अंत-रत कर (cid:4)दया जाए तब पवू Oतन ; वामी या उसका अिभकता O ऐस े अंतरण से चौदह
(cid:4)दन के भीतर अिधिनयम के और िविनयम(cid:16) के या उनके अधीन (cid:4)कए गए आदशे (cid:16) के अनसु रण म8 अनरु ि>क सम; त न) श,े
-रपोटO, रिज;ट र और अ(cid:25)य अिभलेख तथा खान चलान ेसे सबं िं धत और उससे सुसगं त सभी पEाचार नये ; वामी या उसके
अिभकताO को सsप दगे ा; और इस ख(cid:141)ड क(cid:28) अपे>ाu का स(cid:18) यक (cid:21)प से अनुपालन हो जान े पर, पूवOतन और नया ; वामी
या उनके अपन-े अपन ेअिभकता Oिलिखत (cid:21)प म8 मु} य िनरी>क और >ेEीय िनरी>क को त क ाल सिू चत कर8गे।10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) जब (cid:4)कसी अिभकता O या (cid:20)बंधक क(cid:28) िनयिु " क(cid:28) जाए या जब ऐसे (cid:4)कसी A यि" का िनयोजन समाR त कर (cid:4)दया जाए
या जब ऐसा कोई Aय ि" उ)त िनयोजन छोड़ द े या जब (cid:4)कसी अिभकता O या (cid:20)बंधक के पते म 8 कोई प-रवतनO हो, तो
;व ामी, अिभकताO या (cid:20)बंधक ऐसी िनयुि", समािI या प-रवतOन क(cid:28) तारीख से चौदह (cid:4)दन के भीतर म}ु य िनरी>क और
>ेEीय िनरी>क को, इस (cid:20)योजन के िलए म}ु य िनरी>क (cid:31)ारा िविनSदT ट (cid:20)(cid:21)प और प\ित म,8 सूचना देगा।
(3) (cid:20) य के खान का (cid:20)बंधक, उसके खान क(cid:28) बावत (cid:20) य ेक उप (cid:20)बंधक, सं; थापन (cid:20)बंधक, सुर>ा अिधकारी, अि(cid:133)शमन
अिधकारी और अ(cid:25)य पदधा-रय(cid:16) और स>म rि"य(cid:16) क(cid:28) िनयिु " और िनयोजन क(cid:28) समािI से संबंिधत सभी (cid:20)कार के
द;तावेज(cid:16) को रखेगा और उसस ेसंबिं धत सभी द; तावेज खान के कायाOलय म8 उपलGध रखे जाएँगे।
7777.... खखखखततततररररननननााााकककक घघघघटटटटननननाााा ययययाााा ददददघघघघुुुु टट**टट** ननननाााा हहहहोोोोनननन ेे ेे कककक---- ससससचचूूचचूू ननननाााा ....---- (1) जब (cid:4)कसी खान म8 या उसके आसपास- (क) खनन स(cid:4)ं 5या स े
स(cid:18)ब ि(cid:25)धत जीवन-हािन या ग(cid:18)भ ीर शारी-रक >ित करनवे ाला कोई दघु टO ना हो जाए; या
(ख) कायOरत Aय ि"य(cid:16) को चोट प%चँ ाने क(cid:28) अ(cid:25) त: शि" वाली कोई सहज अिभ(cid:127)ये घटना, िजस े इसके आग े "खतरनाक
घटना" के संदभO से सदं zभत (cid:4)कया गया ह,ै हो जाए, जैस े(cid:4)क -
(i) कोई िव;फ ोट या cव लन घ-टत होना;
(ii) िवफल िव;फ ोट होना;
(iii) कोई बड़ा आग लग जाना;
(iv) कोई पाईप लाइन या पेpोिलयम, (cid:20)ाकृितक गसै , वाT प, स(cid:18) पीि़डत वाय ु या अ(cid:25) य पदाथO वाला कोई
उप;क र को वायमु ंडलीय दाब से अिधक दाब पर फट जाना ;
(v) पेpोिलयम का कोई बड़ा अिनयिं Eत उ सजOन या रासायिनक -रसाव;
(vi) कषणO -सकं म,O केbसग लाइन का कोई आवJ यक भाग भंग जो जाना या टूट जाना या आपात (cid:131)ेक का टूट
जाना िजससे Aय ि"य(cid:16) क(cid:28) सुर>ा खतरे म8 पड़ जाए ;
(vii) ड-े रक, मशीनरी या सािधE का कोई आवJ यक भाग भंग हो जाना या टूट जाना िजसस े A यि"य(cid:16) क(cid:28)
सुर>ा खतरे म8 पड़ जाए;
(viii) अपायकर गसै (cid:16) का अ(cid:25) तवाOह हो जाना;
(ix) िव;फ ोट के कारण कोई दघु Oटना हो जाना;
तब खान का ;व ामी, अिभकताO या (cid:20)बंधक >ेEीय िनरी>क को घटना के िवषय म8 टेलीफोन, फै)स , ई-मले या िवशषे
संदशे वाहक (cid:31)ारा त क ाल सिू चत करेगा; और साथ ही साथ (cid:20) य ेक ऐसी घटना के घ-टत होन ेके चौबीस घंटे के भीतर, इस
(cid:20)योजन के िलए म}ु य िनरी>क (cid:31)ारा िविनSदT ट (cid:20)(cid:21)प और प\ित म,8 इसक(cid:28) सूचना िजला मिज; pेट, म}ु य िनरी>क और
>ेEीय िनरी>क को तथा ख(cid:141)ड (क) म8 वzणत दघु Oटना क(cid:28) ि;थित म8 मआु वजा भुगतान से सबं ंिधत स>म (cid:20)ािधकार को भी
दगे ा:
पर(cid:25)त ु य(cid:4)द ऐसी सचू ना ई-मले (cid:31)ारा भजे ी जाती ह,ै तो उसके बाद अिवल(cid:18) ब फै) स या पE भजे ा जाएगा।
(2) ;व ामी, अिभकता O या (cid:20)बंधक साथ ही साथ सूचना क(cid:28) एक (cid:20)ित खान के कायाOलय म8 एक िवशषे सूचना प(cid:143) पर
(cid:20)दzशत करेगा; जो वहाँ ऐसे (cid:20)दzशत करन ेक(cid:28) तारीख से कम से कम चौदह (cid:4)दन क(cid:28) अविध के िलए रखा जाएगा।
(3) जब खान म 8 या उसके आसपास वैjुत ऊजा Oके उ पादन, भ(cid:141) डारण, (cid:21)पा(cid:25)त रण, संचारण, आपूzत या उपयोग करन े
स े संबंिधत जीवन-हािन, गंभीर शारी-रक >ित या जलन आघात (बनO इंc यूरी) करन े वाली कोई दघु Oटना होती ह,ै तो
;व ामी, अिभकताO या (cid:20)बधं क खान िनरी>क (वैjुत) को भी टेलीफोन, फै)स , ई-मेल या (cid:4)कसी िवशेष संदशे वाहक (cid:31)ारा
त क ाल सूिचत करेगा :
पर(cid:25)त ु य(cid:4)द ऐसी सचू ना ई-मले (cid:31)ारा भजे ी जाती ह,ै तो उसके बाद अिवल(cid:18) ब फै) स या पE भजे ा जाएगा।
(4) य(cid:4)द (cid:4)कसी ऐसी चोट स,े िजसक(cid:28) -रपोटO उस ेगंभीर मानत े%ए उप-िविनयम (1) के अधीन पहले दी गई हो, म ृ य ु हो
जाती ह ै या य(cid:4)द गंभीर चोट के अलावा अ(cid:25) य कोई चोट गंभीर बन जाती ह,ै तो ; वामी, अिभकता O या (cid:20)बंधक उस े यह¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 11
सूचना िमलने के चौबीस घंटे के भीतर, उसक(cid:28) सूचना िजला मिज; pेट, मु} य िनरी>क, >ेEीय िनरी>क तथा मआु वजा
भुगतान स े संबिं धत स>म (cid:20)ािधकार को देगा और, य(cid:4)द ऐसी म ृ यु या चोट उप-िविनयम (3) के अधीन िविनSदT ट (cid:4)कसी
कारण से जुड़ा हो, तो इसक(cid:28) सचू ना खान िनरी>क (वैjुत) को भी दगे ा।
(5) ;व ामी, अिभकताO या (cid:20)बधं क, हर ऐसे Aय ि" के बारे म 8 िजसक(cid:28) म ृ यु या िजसे >ित ऊपर िलखे अनुसार %ई हो,
घटना के सात (cid:4)दन के भीतर उसका िववरण, और घायल Aय ि" के काम पर लौटन े के पं(cid:26)ह (cid:4)दन के भीतर भी उसका
िववरण, इस (cid:20)योजन के िलए मु}य िनरी>क (cid:31)ारा िविनSदT ट (cid:20)(cid:21)प और प\ित म,8 मु} य िनरी>क और >ेEीय िनरी>क
को भेजेगा।
8888.... ररररोोोोगगगग कककक---- ससससचचूूचचूू ननननाााा....---- जहाँ खान म8 िनयोिजत (cid:4)कसी A यि" को अिधिनयम क(cid:28) धारा 25 के अधीन के(cid:25) (cid:26)ीय सरकार (cid:31)ारा
अिधसिू चत कोई रोग हो जाता ह,ै तो ;व ामी, अिभकता O या (cid:20)बंधक ऐस े रोग क(cid:28) सचू ना िमलन े के तीन (cid:4)दन के भीतर,
उसक(cid:28) सूचना, इस (cid:20)योजन के िलए मु} य िनरी>क (cid:31)ारा िविनSदT ट (cid:20)(cid:21)प और प\ित म8, मु} य िनरी>क, >ेEीय
िनरी>क, खान िनरी>क (िच(cid:4)क स ीय), िजला मिज; pेट और मआु वजा भुगतान से संबंिधत स>म (cid:20)ािधकार को दगे ा।
9999.... ररररेेेेखखखखााााककककंंंं ....---- (1) (cid:20) य के खान का ;व ामी, अिभकताO या (cid:20)बंधक िन(cid:144)िलिखत रेखाकं (cid:16) को प-रशु\ और अjितत रखेगा, अथाOत ्
–
(क) रा(cid:145)ीय िaड के (cid:20)ितिनदशw स े एक मलू रेखाकं िजसम8 स(cid:18) यक (cid:21)प से सीमां(cid:4)क त वह >ेE (cid:4)दखाया जाएगा, िजसम 8
पेpोिलयम या (cid:20)ाकृितक गसै के िनTक ासन के िलए स(cid:4)ं 5याए ँऔर आनुषिं गक स(cid:4)ं 5याएँ क(cid:28) जाती ह;H
(ख) एक बिह;त ल रेखाकं िजसम 8खान के भीतर कूप(cid:16), उ पादन सिु वधाu, तथा पाईप लाइन(cid:16) के साथ उनके प%चँ माग O
सिहत सभी सं;थ ापन(cid:16), रेल, िवjुत पारेषण लाइन(cid:16), लोक मागx, भवन(cid:16) या ऐसे अ(cid:25) य ;थायी सरं चनाu जो ; वामी के
नहq ह,H न(cid:4)दय(cid:16) और जलमागx का अव;थ ान (cid:4)दखाया जाएगा:
पर(cid:25)त ु म}ु य िनरी>क, एक िलिखत आदशे (cid:31)ारा, खान सीमा से ऐसी दरू ी तक का रेखाकं रखा जाना अपिे >त कर
सकता ह,ै जो वह उसम 8िविनSदTट करे।
(2) इन िविनयम(cid:16) के उपबंध(cid:16) के अनुसार रखा गया हर रेखांक –
(क) खान और उसके ;व ामी का नाम तथा वह (cid:20)योजन िजसके िलए वह तयै ार (cid:4)कया गया ह,ै दzशत करेगा;
(ख) वा;त िवक उ(cid:134)र (cid:4)दशा या चुंबक(cid:28)य म-े रिडयन और उसक(cid:28) तारीख, दzशत करेगा ;
(ग) जब तक अ(cid:25)य था उपबंिधत न हो, ऐस ेमापमान के अनुसार होगा िजसका सूचक गुणक –
(i) 50,000 : 1, मलू न(cid:146)श(cid:16) क(cid:28) दशा म;8
(ii) 20,000: 1, उप-िविनयम 1 के खंड (ख) म8 उि(cid:6)लिखत तेल कूप(cid:16), गैस कूप(cid:16) और अ(cid:25)य सं; थापन(cid:16) अव;थान(cid:16)
को दशातO ी %ई रेखांक
क(cid:28) दशा म:8
पर(cid:25)त ु म}ु य िनरी>क एक िलिखत आदशे (cid:31)ारा और उन शतx के अधीन जो वह उसम 8 िविनSद(cid:128) करे, रेखाकं
को (cid:4)कसी अ(cid:25)य उपयु)त मापमान पर बनाया जाना अनु(cid:127)ात कर सकेगा;
(घ) िचर;थ ायी कागज, अनरु ेखन कपड़ा या पॉिल;टर (cid:4)फ(cid:6)म पर उिचत (cid:21)प स ेरोशनाई (cid:4)कया %आ होगा और अ(cid:130)छ ी
दशा म8 या इले)p ॉिनक (cid:21)प म8 रखा जाएगा:
पर(cid:25)त ,ु जहा ँ खान म8 रेखाकं को इल)े pॉिनक (cid:21)प म 8 रखा जाता ह,ै वहाँ ;व ामी, अिभकता O तथा (cid:20)बंधक यह
सुिनि(cid:147)त कर8गे (cid:4)क वे िडिजटल तरीके स ेह; ता>-रत (cid:4)कए गए ह Hतथा उनम8 बदलाव या िव(cid:21)पण क(cid:28) संभावना नहq ह ै
और उ(cid:25)ह 8 इस (cid:20)कार सुरि>त (cid:4)कया गया ह ै (cid:4)क ; वामी, अिभकता,O (cid:20)बंधक और मु}य िनरी>क या (cid:4)कसी िनरी>क
(cid:31)ारा पुन(cid:20)ाORत करना सुसा‘य हो;
(ड.) शु\ और अjितत रखा गया हो जो बारह मास के पहल ेका न हो ।12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) सभी रेखाकं , िजनका रखा जाना इन िविनयम(cid:16) या तदधीन बन े (cid:4)कसी आदशे के अतं गतO अपिे>त हो, उ(cid:25)ह 8
खान के कायालO य म 8िनरी>ण के िलए उपलGध रखा जाएगा और त संबंधी एक सूची रखी जाएगी।
11110000.... ससससवववव(cid:22)(cid:22)99(cid:22)(cid:22)99 कककक ::::ाााारररराााा,,,, ररररेेेेखखखखााााककंंककंं ,,,, आआआआ;;;;दददद ककककोोोो ततततययैैययैै ाााारररर ;;;;ककककययययाााा जजजजााााननननाााा ....---- (cid:20) य ेक ऐसा रेखांक या स)े सन, िजसका रखा जाना इन िविनयम(cid:16)
अथवा तदधीन (cid:4)कसी आदशे के अंतगOत अपेि>त ह(cid:16), सवw>क (cid:31)ारा ही अथवा उसके ; वयं के पयOवे>ण म 8 ही तयै ार (cid:4)कया
जाएगा और उस पर उसके (cid:31)ारा इस आशय का एक (cid:20)माण-पE होगा (cid:4)क वह रेखाकं या से) सन या उसका भाग शु\ ह ै
और (cid:20) य ेक ऐसे अवसर पर जब रेखांक या से)स न अjतन (cid:4)कया जाए, उस पर सवw>क (cid:31)ारा ह; ता>र करके तारीख
डाली जाएगी और (cid:20)बंधक (cid:31)ारा (cid:20)ित-ह; ता>-रत करके तारीख डाली जाएगी।
अअअअ(cid:15)(cid:15)(cid:15)(cid:15)ययययाााायययय –––– 3333
ििििननननररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)कककक,,,, (cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं नननन औऔऔऔरररर सससस(cid:22)(cid:22)(cid:22)(cid:22)मममम >>>>यय यय िििि4444
11111111.... ििििननननररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)कककक???? कककक---- अअअअहहहहतत**तत** ााााएएएए ँँ ँँ....---- (1) कोई भी rि" मु}य िनरी>क के (cid:21)प म 8 तब तक िनयु" नहq (cid:4)कया जाएगा जब तक (cid:4)क
उसके पास क8(cid:26)ीय सरकार (cid:31)ारा अनुमो(cid:4)दत (cid:4)कसी शै>िणक स;ं था क(cid:28) खनन इंजीिनयरी म8 िडaी न हो।
(2) कोई भी rि" को िनरी>क के (cid:21)प म 8 तब तक िनयु" नहq (cid:4)कया जाएगा जब तक (cid:4)क उसके पास खनन अथवा
पेpोिलयम इंजीिनयरी म 8क8(cid:26)ीय सरकार (cid:31)ारा अनुमो(cid:4)दत (cid:4)कसी शै>िणक स;ं था क(cid:28) िडaी न हो:
पर(cid:25)त -ु
(i) खान(cid:16) म8 (cid:20)ितTठ ािपत वैjतु मशीनरी के संबंध म,8 उस A यि" को इस (cid:20)कार िनयु) त (cid:4)कया जा सकेगा िजसके पास
के(cid:25)(cid:26) ीय सरकार (cid:31)ारा अनुमो(cid:4)दत (cid:4)कसी शै>िणक सं; था क(cid:28) िवjुत इंजीिनयरी म 8िडaी हो;
(ii) खान(cid:16) म8 (cid:20)ितTठ ािपत अ(cid:25)य मशीनरी या यािं Eक सािधE(cid:16) के सबं ंध म 8उस A यि) ा को उस (cid:20)कार िनयु) त (cid:4)कया जा
सकेगा िजसके पास के(cid:25)(cid:26) ीय सरकार (cid:31)ारा अनुमो(cid:4)दत (cid:4)कसी श>ै िणक सं;थ ा क(cid:28) यािं Eक इंजीिनयरी क(cid:28) िडaी हो;
और
(iii) अिधिनयम के तथा िनयम(cid:16) और िविनयम(cid:16) के उन उपबंध(cid:16) के सबं ंध म 8जो Aय ि"य(cid:16) के ; वा; (cid:129) य और क(cid:6) याण संबंधी
िवषय(cid:16) स ेसबं िंधत ह,ै ऐस ेAय ि" को उस (cid:20)कार िनय)ु त (cid:4)कया जा सकेगा िजसके पास औषध और श(cid:6)य िच(cid:4)क स ा
का बैचलर िडaी हो।
11112222.... इइइइसससस अअअअ(cid:15)(cid:15)(cid:15)(cid:15)यय यय ाााायययय ककककेेेे (cid:16)(cid:16)(cid:16)(cid:16)ययययोोोोजजजजनननन ककककेेेे ििििललललएएएए खखखखाााानननन कककक---- पपपप(cid:29)(cid:29)(cid:29)(cid:29)ररररभभभभााााषषषषाााा ....---- इस अ‘याय के (cid:20)योजन के िलए ; वामी या अिभकता O (cid:31)ारा स(cid:18) यक
(cid:21)प से सीमा(cid:4)ं कत (cid:4)कसी >ेE के भीतर सभी बोoरग, बोर िछ(cid:26), तेल कूप और अनुषंगी पेpोिलयम अनकु ूलन संयंE(cid:16), िजसके
अंतगOत गसै कूप, कायOशालाए,ँ (cid:20)ित;थ ापन(cid:16) और पेpोिलयम वाहक पाईप भी हH, के बारे म 8यह समझा जाएगा (cid:4)क व ेएक
खान के (cid:21)प म 8ह:ै
पर(cid:25)त ु जहा ँ िवशेष प-रि;थितयाँ िवjमान ह(cid:16), वहाँ म}ु य िनरी>क एक िलिखत आदशे (cid:31)ारा और ऐसी शतx के
अधीन रहत े %ए जो वह उसम 8िविनSद(cid:128) करे, ऐस े (cid:4)कसी एक >ेE के दो या दो से अिधक अलग-अलग खान(cid:16) म 8िवभाजन
के िलए अनु(cid:127)ा द ेसकेगा या अप>े ा कर सकेगा।
11113333.... अअअअििििभभभभककककतततताााा ** **कककक---- ििििननननययययिििुुिुु4444 ....---- (1) खान का ;वामी खान के (cid:20)बधं , िनयंEण, पयOवे>ण और िनदशे न के संबधं म 8 ;वामी क(cid:28) ओर
स े काय O करने वाले (cid:20)ािधकृत (cid:20) य के Aय ि" के नाम और पदनाम को दशाOते %ए िलिखत िववरण मु}य िनरी>क और
>ेEीय िनरी>क को (cid:20);त ुत करेगा।
(2) िववरण ऐस े (cid:20) य ेक Aय ि" के दािय व(cid:16) और उन िवषय(cid:16) को दशाOएगा िजसक(cid:28) बावत ;वामी क(cid:28) ओर से काय O करन े
हते ु उस े(cid:20)ािधकृत (cid:4)कया गया ह ै।
(3) ऐसे (cid:20) य ेक Aय ि" को ऐस ेिववरण म8 यथा िविनSदT ट दािय व(cid:16) क(cid:28) बावत, यथाि;थित, उस खान या खान(cid:16) के समूह
का अिभकता Oसमझा जाएगा।
(4) उप-िविनयम (1) के अधीन िविनSद(cid:128) िववरण को यथाि;थित, खान या खान(cid:16) के समू ूह को आरंभ करने या पुन:
आरंभ करन ेक(cid:28) तारीख स ेएक मास के भीतर (cid:20); तुत (cid:4)कया जाएगा:¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 13
पर(cid:25)त ,ु यथाि;थित, (cid:4)कसी ऐसी खान या खान(cid:16) के समहू क(cid:28) दशा म,8 जो पहले से आरंभ क(cid:28) जा चकु (cid:28) ह,ै ऐसा
िववरण इन िविनयम(cid:16) के (cid:20)भावी होन ेक(cid:28) तारीख स ेएक मास के भीतर (cid:20); तुत (cid:4)कया जाएगा।
(5) उप-िविनयम (1) म8 िनSदT ट िववरण म8 वzणत नाम(cid:16) या अ(cid:25) य Aय ौर(cid:16) म 8 य(cid:4)द कोई प-रवतOन, जोड़ या फेरबदल
(cid:4)कया जाता ह ै तो इसक(cid:28) िलिखत -रपोटO उस प-रवतOन, जोड़ या फेरबदल क(cid:28) तारीख से चौदह (cid:4)दन के भीतर मु}य
िनरी>क और >ेEीय िनरी>क को दी जाएगी।
11114444.... (cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं कककक???? कककक---- अअअअहहहहततत**त** ाााा औऔऔऔरररर ििििननननययययििुुििुु4444 ....---- (1) कोई भी खान तब तक िववृत नहq क(cid:28) जाएगी, उसम 8 कायO नहq (cid:4)कया जाएगा
या उसे पुन: िववृत नहq (cid:4)कया जाएगा जब त क (cid:4)क उस खान का (cid:20)बंधक ऐसा A यि" न हो िजसे स(cid:18) यक (cid:21)प से िनयु) त
(cid:4)कया गया हो।
(2) कोई भी Aय ि" उप-िविनयम (1) के अधीन (cid:4)कसी खान के (cid:20)बंधक के (cid:21)प म8 न कायO करेगा, न कायO करना जारी
रखेगा या न ही िनय)ु त (cid:4)कया जाएगा, जब तक (cid:4)क उसके पास के(cid:25)(cid:26) ीय सरकार (cid:31)ारा मा(cid:25)य ता(cid:20)ाRत (cid:4)कसी शिै >क स;ं थ ा
का इंजीिनयरी म8 िडaी अथवा िडRल ोमा या भौितक(cid:28) या भू-भौितक(cid:28) या भ-ू िव(cid:127)ान अथवा रसायन िव(cid:127)ान म 8
;न ातको त र क(cid:28) िडaी न हो और इंजीिनयरी म 8 िडR लोमा क(cid:28) दशा म8 जब तक उसके पास तले खान(cid:16) म 8 स(cid:4)ं 5याu के
(cid:20)बंधन और पयOवे>ण म8 पं(cid:26)ह और अ(cid:25)य दशाu म 8दस वषO से अ(cid:25) यून क(cid:28) अविध का अनभु व हो।
(3) जहाँ (cid:20)बंधक, अनुपि;थित या (cid:4)कसी अ(cid:25)य कारण स,े अिध िनयम और िविनयम(cid:16) या उप-िविधय(cid:16) और तदधीन (cid:4)कए
गए आदशे (cid:16) के अधीन अपने क त OAय (cid:16) का िनवाOह करने म8 असमथO हो, वहाँ ; वामी या अिभकता,O (cid:4)कसी ऐसे A यि" को
(cid:20)बंधक के (cid:21)प म8 कायO करन े के िलए िलिखत म8 (cid:20)ािध कृत करेगा, िजनके पास उप-िविनयम (2) के अधीन िविनSदT ट
अहतO ाए ँहो।
(4) (cid:20)बंधक के (cid:21)प म8 कायO करने के िलए ऐसे (cid:20)ािधकृत rि" का, (cid:20)ािधकरण क(cid:28) अविध के दौरान, वही उ तरदाियत् व
होगा तथा वह उ(cid:25)ह q क त OAय (cid:16) का िनवOहन करेगा और उ(cid:25) हq दािय व(cid:16) के अधीन रहगे ा, जो (cid:20)बंधक के होत ेह।H
11115555.... उउउउपपपप----(cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं कककक???? कककक---- अअअअहहहहततत**त** ााााएएएएँँ ँँ औऔऔऔरररर ििििननननययययििुुििुु4444 ....---- (1) (cid:20) यके खान म,8 िजसम8 दो से अिधक सं; थापन या उसके भाग ह(cid:16),
(cid:20)बंधक, (cid:20)ित आठ अित-र)त स;ं थ ापन(cid:16) या उसके भाग के िलए एक अपर उप-(cid:20)बंधक के अनुपात म,8 उप-(cid:20)बंधक या उप-
(cid:20)बंधक(cid:16) क(cid:28) सहायता (cid:20)ाRत करेगा।
(2) कोई भी Aय ि" उप-िविनयम (1) के अधीन (cid:4)कसी खान के उप-(cid:20)बंधक के (cid:21)प म8 न कायO करेगा या न कायO करना
जारी रखेगा या न ही िनयु)त (cid:4)कया जाएगा, जब तक उसके पास के(cid:25) (cid:26)ीय सरकार (cid:31)ारा मा(cid:25)य ता(cid:20)ाR त (cid:4)कसी शै>िणक
सं;थ ा का इंजीिनयरी म 8 िडaी अथवा िडR लोमा या भौितक(cid:28), भ-ू भौितक(cid:28), भ-ू िव(cid:127)ान अथवा रसायन िव(cid:127)ान म 8
;न ातको त र क(cid:28) िडRल ोमा न हो और जब तक उसके पास, इंजीिनयरी म 8िडR लोमा क(cid:28) दशा म8 तेल खान(cid:16) म8 स(cid:4)ं 5याu के
(cid:20)बंधन और पयOवे>ण म8 आठ वषO और अ(cid:25) य दशाu म 8पाँच वष Oसे अ(cid:25) यून क(cid:28) अविध का अनभु व हो।
11116666.... सससस++ंं++ंं थथथथाााापपपपनननन (cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं कककक कककक---- अअअअहहहहतत**तत** ाााा औऔऔऔरररर ििििननननययययििुुििुु4444 ....---- (1) (cid:4)कसी खान का (cid:20) येक सं;थ ापन को, उसके ; वामी, अिभकता O या
(cid:20)बंधक (cid:31)ारा िनयु)त एक स;ं थ ापन (cid:20)बंधक के भारसाधन के अधीन रखा जाएगा:
पर(cid:25)त ,ु जहाँ (cid:4)कसी खान म,8 ; वामी, अिभकताO या (cid:20)बंधक का यह मत हो (cid:4)क (cid:4)क(cid:25) हq िविशT ट स;ं थापन(cid:16) के आकार,
(cid:20)कृित, अव;थ ान तथा िव;त ार इस (cid:20)कार ह H (cid:4)क एक स;ं थ ापन (cid:20)बधं क एक स े अिधक स;ं थ ापन(cid:16) के िलए अपन े कतAO य (cid:16)
का उिचत (cid:20)कार से िनवOहन कर सकता ह,ै तो वह वहा,ँ उसके अिधका-रता को -रकॉड O करते %ए और (cid:20) यके ऐसे मामल े
म 8 >ेE के अिधका-रता को ;प Tट त: िविनSदT ट करते %ए, एक स े अिधक सं; थापन(cid:16) के िलए एक सं; थापन (cid:20)बंधक क(cid:28)
िनयुि" कर सकेगा।
(2) उप-िविनयम (1) के अधीन िनयु) त ऐस े सं;थापन (cid:20)बंधक िजनके पास के(cid:25) (cid:26)ीय सरकार (cid:31)ारा मा(cid:25) यता(cid:20)ाR त (cid:4)कसी
शैि>क सं;थ ा स ेइंजीिनयरी म 8िडaी या िडRल ोमा अथवा िव(cid:127)ान म 8िडaी हो और उसके पास इंजीिनयरी म 8िडRल ोमा या
िव(cid:127)ान म 8िडaी क(cid:28) दशा म 8तले खान(cid:16) म8 स(cid:4)ं 5याu के (cid:20)बंधन या पयOवे>ण म 8पाचँ वषO और इंजीिनयरी म 8िडaी क(cid:28) दशा
म 8दो से अ(cid:25)य ून क(cid:28) अविध का अनुभव हो।14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
11117777.... ससससररुुररुु (cid:22)(cid:22)(cid:22)(cid:22)ाााा अअअअििििधधधधककककााााररररीीीी कककक---- अअअअहहहहतत**तत** ाााा औऔऔऔरररर ििििननननययययििुुििुु4444 ....----(1) (cid:20) यके खान का ; वामी, अिभकता O या (cid:20)बंधक, कायO ;थ ल पर सरु >ा और
rवसाय ;वा;(cid:129)य को बढ़ावा दने े म8 (cid:20)बंधक क(cid:28) सहायता के िलए एक सुर>ा अिधकारी को िनयु) त करेगा:
पर(cid:25)त ,ु जहाँ (cid:4)कसी खान म8, ; वामी, अिभकता O या (cid:20)बंधक का यह मत हो (cid:4)क खान के बड़ े आकार के कारण
या खान म8 सं;थ ापन(cid:16) क(cid:28) अिधक सं}य ा के कारण या खान म 8 िवjमान अ(cid:25)य दशाu के कारण, एक सरु >ा अिधकारी के
िलए अपन ेक त OAय (cid:16) का िनवOहन (cid:20)भावी (cid:21)प स े ; वत: कर पाना सभं व नहq ह,ै वहा ँ ; वामी, अिभकता O या (cid:20)बंधक उतनी
और सं}य ा म 8 सरु >ा अिधका-रय(cid:16) को, उनके >ेEािधकार(cid:16) को ; पT टत: िविनSदT ट करते %ए, िनयु) त करेगा, जो इन
िविनयम(cid:16) के अधीन कतOAय (cid:16) के (cid:20)भावी िनवOहन के िलए पयाORत ह(cid:16)।
(2) इस उप-िविनयम (1) के अधीन िनयु" (cid:4)कए गए ऐसे सरु >ा अिधकारी िजनके पास के(cid:25) (cid:26)ीय सरकार (cid:31)ारा
मा(cid:25)य ता(cid:20)ाRत (cid:4)कसी शिै >क सं;थ ा स ेइंजीिनयरी म 8िडaी अथवा िडR लोमा या िव(cid:127)ान म8 ; नातक या औjोिगक सुर>ा म 8
िडaी या >ेEीय Nम सं;थ ान से Aय वसाियक सुर>ा म8 ; नातको तर िडR लोमा हो और उसके पास, इंजीिनयरी म 8
िडRल ोमा या िव(cid:127)ान म8 ;न ातक क(cid:28) दशा म8 तेल खान(cid:16) म 8स(cid:4)ं 5याu के (cid:20)बंधन या पयOवे>ण म 8आठ वष Oऔर अ(cid:25) य दशाu
म 8पाँच वषO स ेअ(cid:25)य नू अविध का अनुभव हो।
11118888.... ससससवववव(cid:22)(cid:22)99(cid:22)(cid:22)99 कककक कककक---- अअअअहहहहतत**तत** ाााा औऔऔऔरररर ििििननननययययििुुििुु4444 ययययाााा (cid:16)(cid:16)(cid:16)(cid:16)ााााििििधधधधककककाााारररर ....---- (cid:20) यके खान म 8 (cid:4)कसी ऐस े A यि", िजनके पास के(cid:25) (cid:26)ीय सरकार (cid:31)ारा
मान य् ता(cid:20)ाRत (cid:4)कसी शिै >क सं;थ ा स े खनन ् अथवा िसिवल इंजीिनयरी म 8 िडaी या िडR लोमा या इं; टी(cid:130) यसू न ऑफ
सवwयर (cid:31)ारा जारी सवw>ण म8 (cid:20)माण पE या अिधिनयम के अधीन जारी सवw>क का (cid:20)माण पE हो, को खान (cid:20)बंधक को,
जब कभी आवJय क हो, सहायता के िलए और इन िविनयम(cid:16) म 8 और तदधीन (cid:4)कए गए आदशे (cid:16) के अधीन यथाअपिे >त
सवw>ण और लेवbलग के िनTप ादन तथा रेखांक(cid:16) और से)स न(cid:16) को तैयार करन े के िलए, सवw>क के (cid:21)प म8 िनयु" या
(cid:20)ािधकृत (cid:4)कया जाएगा।
11119999.... अअअअिििि@@@@शशशशममममनननन अअअअििििधधधधककककााााररररीीीी कककक---- अअअअहहहह*त*त*त*ताााा औऔऔऔरररर ििििननननययययििुुििुु4444 ....---- (1) (cid:20) यके खान का ; वामी, अिभकताO या (cid:20)बंधक, अि(cid:133)शमन के
िलए और अि(cid:133) िनवारण के उपाय(cid:16) के संबंध म8 (cid:20)बंधक क(cid:28) सहायता के िलए एक अि(cid:133)शमन अिधकारी को िनयु" करेगा:
पर(cid:25)त ,ु जहा ँ (cid:4)कसी खान म,8 ; वामी, अिभकताO या (cid:20)बंधक का यह मत हो (cid:4)क खान के बड़ े आकार के कारण,
या खान म 8सं;थ ापन(cid:16) क(cid:28) अिधक सं}य ा के कारण, या खान म8 िवjमान अ(cid:25) य दशाu के कारण एक अि(cid:133)शमन अिधकारी
के िलए अपन े क त OAय (cid:16) का िनवOहन (cid:20)भावी (cid:21)प से ; वत: कर पाना सभं व नहq ह,ै वहाँ ; वामी, अिभकता O या (cid:20)बंधक
उतनी और सं}य ा म 8 अि(cid:133)शमन अिधका-रय(cid:16) को उनके >Eे ािधकार(cid:16) को, ; पT टत: िविनSदT ट करत े %ए, िनय)ु त करेगा,
जो इन िविनयम(cid:16) के अधीन कतAO य (cid:16) के (cid:20)भावी िनवOहन के िलए पयाOR त ह(cid:16)।
(2) कोई भी Aय ि" अि(cid:133)शमन अिधकारी के (cid:21)प म 8तब तक िनयु) त नहq (cid:4)कया जाएगा जब तक (cid:4)क उसके पास :
(क) के(cid:25)(cid:26) ीय सरकार (cid:31)ारा मा(cid:25)य ता(cid:20)ाR त (cid:4)कसी शिै >क सं;था का अि(cid:133) और सुर>ा इंजीिनयरी म 8 िडaी या
िडRलोमा न हो और उसके पास अि(cid:133)शमन सेवाu के िनपटान और (cid:20)बंधन म,8 िडaी क(cid:28) दशा म 8एक वषO या िडR लोमा क(cid:28)
दशा म8 दो वषO क(cid:28) अविध का, अनभु व न हो।
अथवा
(ख) के(cid:25)(cid:26) ीय सरकार (cid:31)ारा मा(cid:25)य ता(cid:20)ाR त शैि>क सं; थान से अिभयंEण म8 िडaी या िडRलोमा या िव(cid:127)ान म 8
;न ातक धारण न करता हो तथा सभं ागीय अिधका-रय(cid:16) के पा(cid:148)5म का अ‘ ययन न (cid:4)कया हो, और उसके पास अि(cid:133)शमन
सेवाu के िनपटान और (cid:20)बंधन म,8 िडaी क(cid:28) दशा म8 एक वषO या िडRलोमा क(cid:28) दशा म8 दो वषO क(cid:28) अविध का, अनभु व न
हो।
अथवा
(ग) मु}य िनरी>क (cid:31)ारा इस (cid:20)योजन के िलए िविनSदT ट (cid:4)कसी सं;थान स े ;टेशन अिधकारी के या उप-
अिधकारी के पा(cid:148)5म का अ‘य यन न (cid:4)कया हो और साथ ही उसके पास अि(cid:133)शमन सेवाu के िनपटान और (cid:20)बंध म,8
दस वष Oक(cid:28) अविध का, अनभु व न हो।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 15
22220000.... ककककूूूूपपपप ििििछछछछCCCCणणणण ककककेेेे ििििललललएएएए सससस(cid:22)(cid:22)(cid:22)(cid:22)मममम DDDDिििि4444यययय???? कककक---- अअअअहहहहतत**तत** ाााा औऔऔऔरररर ििििननननययययििुुििुु4444 ययययाााा (cid:16)(cid:16)(cid:16)(cid:16)ााााििििधधधधककककाााारररर ....---- (cid:20) यके खान का ; वामी, अिभकता O या
(cid:20)बंधक, एक या एक स े अिधक Aय ि" या A यि"य(cid:16) को, तले उjोग सुर>ा िनदशे ालय मानक, OISD-STD-191 या
उसके सशं ोिधत सं;क रण के अनसु ार, कूप िछ(cid:26)ण के िनिम त िव; फोटक(cid:16) के सचं लन, प-रवहन और उपयोग के िलए स>म
Aय ि" या Aय ि"य(cid:16) के (cid:21)प म 8(cid:20)ािधकृत करेगा।
22221111.... पपपपददददधधधधाााा(cid:29)(cid:29)(cid:29)(cid:29)ररररयययय???? औऔऔऔरररर सससस(cid:22)(cid:22)(cid:22)(cid:22)मममम >>>>यय यय िििि4444यययय???? कककक---- ििििननननययययििुुििुु4444 ....---- (1) (cid:20) यके खान का ; वामी, अिभकताO या (cid:20)बंधक उतने स}ं य ा म8 स>म
rि"य(cid:16), िजसके अतं गOत पदधारी भी ह,H क(cid:28) िनयुि" करेगा, िजतन े (cid:4)क (cid:20) य ेक चाल ू पाली के दौरान िन(cid:18) निलिखत को
सुिनि(cid:147)त करन ेके िलए पयाOI ह(cid:16),
(क) सं;थापना और उसके उप;क र(cid:16) का पयाOI िनरी>ण;
(ख) सं;थापना म 8क(cid:28) सभी स(cid:4)ं 5याu क(cid:28) पूरी तरह पयOवे>ण;
(ग) खान म 8क(cid:28) सभी मशीनरी का काम करने क(cid:28) िनरापद दशा म 8सं; थापन, प-रचालन और अनुर>ण; और
(घ) अिधिनयम और इन िविनयम(cid:16) क(cid:28) अपे>ाu का (cid:20)वतOन।
(2) यह सिु नि(cid:147)त करना (cid:20)बंधक, उप (cid:20)बंधक और सं;थ ापन (cid:20)बंधक का दािय व होगा (cid:4)क उप-िविनयम (1) के अधीन
िनयु" rि" उ(cid:25)ह 8सsप ेगऐ दािय व (cid:16) का िनT पादन करने के िलए स>म ह:H
पर(cid:25)त ,ु कोई भी Aय ि" को तब तक इस (cid:20)कार िनयु) त (cid:4)कया जाएगा जब तक वह खान के ; वामी या
अिभकताO स ेवेतन पाता हो और (cid:20)बंधक के (cid:20)ित उ तरदायी हो।
(3) उप िविनयम (1) के अधीन क(cid:28) गई सभी िनयिु ) त य(cid:16) तथा उप-िविनयम (2) के अधीन स>म rि"य(cid:16) को सsपे गए
कतOr(cid:16) का िववरण (cid:20)बधं क (cid:31)ारा अनरु ि>त (cid:4)कया जाएगा।
22222222.... ससससााााममममाााा’’’’यययय (cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं नननन ....---- (1) ;व ामी, अिभकता O और (cid:20)बंधक खान म 8 िनयोिजत rि"य(cid:16) क(cid:28) सुर>ा, ;वा;(cid:129)य, क(cid:6)याण,
वातावरण और समिु चत अनशु ासन के िलए Aय व; था कर8गे।
(2) िसवाय आपात क(cid:28) दशा म,8 कोई भी ऐसा Aय ि", जो पदधारी या स>म rि" नहq ह,ै खान म 8 िनयोिजत (cid:4)कसी
ऐसे Aय ि" को, जो (cid:20)बंधक के (cid:20)ित उ त रदायी हो, (cid:20)बंधक के मा‘ यम से अ(cid:25) यथा अनुदशे नहq दगे ा।
अअअअ(cid:15)(cid:15)(cid:15)(cid:15)ययययाााायययय –––– 4444
(cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं ,,,, ठठठठेेेेककककेेेेददददाााारररर????,,,, ििििववववििििननननममममाााातत**तत** ााााFFFF,,,, सससस(cid:22)(cid:22)(cid:22)(cid:22)मममम >>>>यय यय िििि4444यययय???? औऔऔऔरररर ककककााााममममगगगगाााारररर???? ककककेेेे ककककतततत>>**>>** यय यय औऔऔऔरररर उउउउ2222तत तत ररररददददाााािििियययय2222 वव व व
22223333.... ++++वव वव ााााममममीीीी ककककेेेे ककककतततत>>**>>** ययय य औऔऔऔरररर उउउउ2222तत तत ररररददददाााािििियययय2222वव वव ....---- (1) (cid:20) यके खान का ; वामी यह सिु नि(cid:147)त करेगा (cid:4)क –
(क) इस िविनयम के अधीन बन े सभी उपबंध और अिधिनयम के अधीन िवरिचत तेल और (cid:20)ाकृितक गसै खान(cid:16) स े
संबंिधत िनयम अनुपािलत होते ह;H
(ख) खान(cid:16) म8 िनयोिजत Aय ि"य(cid:16) क(cid:28) ; वा; (cid:129) य और सुर>ा के जोिखम(cid:16) को दरू या कम करने के िलए सभी आवJ यक
उपाय (cid:4)कए गए ह;H
(ग) इन िविनयम(cid:16) के अधीन अपिे >त सुर>ा (cid:20)बंध योजना (cid:20) येक खान म8 तयै ार और लागू (cid:4)कया गया ह;ै
(घ) (cid:4)कसी आपात क(cid:28) दशा म 8 काया(cid:25)O व यन के िलए िविनयम 102 के अधीन अपेि>त (cid:20) य ेक खान क(cid:28) आपात योजना
तैयार क(cid:28) गई ह;ै
(ड.) (cid:20)ाथिमक उपचार, कायO;थ ल से समिु चत प-रवहन और समिु चत िच(cid:4)क स ा सुिवधा तक प%चँ क(cid:28) Aय व; था ऐस े
(cid:20) य के Aय ि" के िलए क(cid:28) गई ह ैजो काय-O ; थल पर घायल होते ह Hया बीमार पड़ते ह;H
(च) कामगार(cid:16) को िबना उनके (cid:4)कसी खच O के, सुर>ा और ; वा; (cid:129) य मामल(cid:16) पर और सsप े गए कायO पर (cid:20)िश>ण एव ं
पुन:(cid:20)िश>ण के पयाORत काय5O म और Aय ापक अनदु शे क(cid:28) Aय व; था क(cid:28) गई ह;ै और16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(छ) खनन स(cid:4)ं 5या से संबिं धत सभी दघु Oटनाu और खतरनाक घटनाu क(cid:28) जाँच क(cid:28) जाती ह ैऔर उनक(cid:28) पुनराविृ त को
रोकन ेके िलए उिचत कारOवाई क(cid:28) गई ह।ै
(2) जहाँ खान के (cid:4)कसी स(cid:4)ं 5या म 8 संल(cid:138)न Aय ि"य(cid:16) का भौितक, रसायिनक या जैिवक खतर(cid:16) स े (cid:20)भािवत होना संभाAय
हो, तो ;व ामी यह सिु नि(cid:147)त करेगा (cid:4)क ऐस े A यि"य(cid:16) को उिचत संर>ा उप;क र, आवJ यकतानुसार कपड़ े तथा इन
िविनयम(cid:16) के अधीन अपेि>त अ(cid:25)य सुिवधाएँ िन:शु(cid:6) क उपलG ध कराई जाती ह।ै
22224444.... आआआआपपपप""ूू""ूूततततकककक2222तत तत ाााा,,**,,** ििििववववििििननननममममाााातत**तत** ाााा औऔऔऔरररर अअअअििििभभभभककककHHHHपप पप कककक कककक---- ससससााााममममाााा’’’’यय यय ििििजजजज(cid:18)(cid:18)(cid:18)(cid:18)मम मम ददेेददेे ाााा(cid:29)(cid:29)(cid:29)(cid:29)ररररययययाााा ँँ ँँ....---- खान(cid:16) म8 उपयोग होनेवाली मशीनरी, उप;क र(cid:16) या
सामिaय(cid:16) के अिभक(cid:6)प न, िनमाणO , आयात, उपलG धता या ; थाना(cid:25)त रण करन े वाला rि" िन(cid:18) निलिखत बात(cid:16) का ‘ यान
रखेगा -
(क) यह सिु नि(cid:147)त करेगा (cid:4)क इन मशीनरी, उप;क र(cid:16) और सामिaय(cid:16) के सही उपयोग करन ेवाले A यि"य(cid:16) क(cid:28) सरु >ा और
;व ा;(cid:129) य को इनके इ;त ेमाल से कोई खतरा उ प(cid:25) न नहq होगा;
(ख) िन(cid:18)न िलिखत उपलGध कराएगा -
(i) मशीनरी और उप;क र(cid:16) के सही ; थापन, रख-रखाव और उपयोग तथा सामिaय(cid:16) के सही भंडारण और उपयोग स े
संबंिधत अपिे >त जानकारी;
(ii) मशीनरी और उप;क र(cid:16) स े संबंिधत खतरे, जोिखममय सामिaय(cid:16) और भौितक कारक(cid:16) या उ पाद(cid:16) के खतरनाक
िवशेषताu से संबंिधत जानकारी, और
(iii) उ प ाद(cid:16) स े जुड़ े खतर(cid:16), िजनक(cid:28) पहचान क(cid:28) जा चकु (cid:28) ह,ै स े उ प(cid:25) न जोिखम(cid:16) को हटान े या िनयिं Eत करने स े
संबंिधत जानकारी।
22225555.... ठठठठेेेेककककेेेेददददाााारररर???? ककककेेेे ििििजजजज(cid:18)(cid:18)(cid:18)(cid:18)मम मम ददेेददेे ाााा(cid:29)(cid:29)(cid:29)(cid:29)ररररययययाााा ँँ ँँ....---- (1) खान म8 (cid:4)कसी कायO के िलए अिभिनयोिजत कोई ठेकेदार –
(क) काय O (cid:20)ारंभ करन ेस ेपूवO उिचत ;त र के पयवO े>क(cid:16), पदधा-रय(cid:16) और c येT ठ पदधा-रय(cid:16) के बीच सतत (cid:21)प स े(cid:20)भावी
संचार और सम(cid:25)व य ;थ ािपत करेगा और उसे बनाए रखेगा, िजसम8 खतर(cid:16) क(cid:28) पहचान संबंिधत उपबंध(cid:16) और खतर(cid:16) के दरू
करने और िनयिं Eत करने के उपाय सि(cid:18)मिलत ह(cid:16)ग;े
(ख) कायO से संबंिधत >ितय(cid:16) और रोग(cid:16), बीमार, ; वा; (cid:129) य एवं ठेकेदारी कzमय(cid:16) के बीच खान म8 काम के दौरान
होनेवाली घटनाu का -रपोटO दने े क(cid:28) Aय व; था सिु नि(cid:147)त करेगा;
(ग) काय O (cid:20)ारंभ होन े स े पूव O तथा आवJ यकतानुसार चालू काय O के दौरान अपन े कमकO ार(cid:16) को ससु ंगत काय-O ; थल क(cid:28)
सुर>ा और ;व ा;(cid:129) य संबंिधत खतर(cid:16) के (cid:20)ित जाग(cid:21)कता तथा (cid:20)िश>ण दगे ा; और
(घ) अिधिनयम तथा तदधीन बने िनयम(cid:16) एवं िविनयम(cid:16) के उपबंधो का अनपु ालन सुिनि(cid:147)त करेगा।
(2) ठेकेदार(cid:16) के अिभिनयोजन के समय ;व ामी, अिभकता Oया (cid:20)बंधक सिु नि(cid:147)त करेगा (cid:4)क –
(क) ठेकेदार तथा उसके कमकO ार(cid:16) पर वही सुर>ा और (cid:20)िश>ण संबंिधत अपे>ाएँ लागू ह(cid:16) जो ; थापन के के कमकO ार(cid:16)
पर लागू होते ह;H
(ख) जहा ँ अपिे >त हो, वहाँ िसफO ऐस े ठेकेदार(cid:16) को ही अिभिनयोिजत (cid:4)कया जाए, जो स(cid:18)य क (cid:21)प से रिज; pीकृत ह H या
जो अनु(cid:127)िI धारण करते ह(cid:16); और
(ग) सिं वदा म,8 सरु >ा और ;व ा;(cid:129) य क(cid:28) अपे>ाए ँ और अनपु ालन न होने क(cid:28) दशा म,8 दंड और शाि;तय(cid:16) का उपबंध
िविनSदTट होगा और ऐसी सिं वदा म 8यह शािमल होगा (cid:4)क खान के पदधा-रय(cid:16) को, उस समय कायO को बंद करने का जब
भी गंभीर चोट का खतरा (cid:20)तीत होता हो, और सं(cid:4)5या तब तक िनलिं बत रखने का जब तक इनका आवJ यक उपचार न
कर िलया गया हो, अिधकार होगा।
22226666.... खखखखाााानननन???? मममम 33 33ििििननननययययोोोोििििजजजजतततत DDDDिििि4444यययय???? ककककेेेे ककककततततDD**DD** ....---- (1) (cid:20) यके rि", अिधिनयम और उनके अधीन बनाए गए िविनयम(cid:16) और
(cid:4)कए गए आदशे (cid:16) के उपबंध(cid:16) का और Aय ि"य(cid:16) क(cid:28) सुर>ा या सुिवधा क(cid:28) दिृ(cid:128) स े (cid:20)बधं क या (cid:4)कसी पदधारी (cid:31)ारा जारी
(cid:4)कए गए (cid:4)कसी आदशे या िनदशे का जो अिधिनयम और इन िविनयम(cid:16) स े असंगत न हो, सवथO ा पालन करेगा, और वह
ऐसे आदेश(cid:16) या िनदशे (cid:16) के पालन म8 उप>े ा या उनके पालन स ेइ(cid:25) कार नहq करेगा।
(2) (cid:20) यके rि" सुर>ा िनदशw (cid:16) का पालन करने के िलए और समय-समय पर (cid:20)बंधक, उप-(cid:20)बंधक या सं; थापन
(cid:20)बंधक (cid:31)ारा जारी (cid:4)कए गए सरु >ा िनदwश(cid:16) स ेसुप-रिचत होने के िलए उ त रदायी होगा ।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 17
(3) कायO (cid:20)ार(cid:18)भ करन ेस ेपहले (cid:20) य ेक A यि" अपने कायO ;थ ान का और उस उप; कर का िजसका उसे उपयोग करना ह,ै
पड़ताल करेगा और कोई खतरनाक E-ु ट पाए जाने पर उसक(cid:28) -रपोटO अपने व-रT ठ को त क ाल करेगा।
(4) (cid:20) य के rि" ऐसे र>(cid:16)पाय(cid:16), सुर>ा युि"य(cid:16) और अ(cid:25) य सािधE(cid:16) का उिचत उपयोग करेगा िजनका (cid:20)बंध उसक(cid:28)
संर>ा या अ(cid:25)य Aय ि"य(cid:16) क(cid:28) सरं >ा के िलए (cid:4)कया गया ह।ै
(5) िसवाय आपात क(cid:28) दशा म8 कोई भी A यि", जब तक (cid:4)क वह स(cid:18)य क (cid:21)प स े(cid:20)ािधकृत न हो ऐसी (cid:4)कसी सरु >ा युि"
या अ(cid:25)य सािधE म8 िजनका (cid:20)बधं उसक(cid:28) संर>ा या अ(cid:25) य A यि"य(cid:16) क(cid:28) संर>ा के िलए क(cid:28) गई ह,ै बाधा नहq डालेगा, उस े
हटाएगा नहq, उसम 8 प-रवतOन नहq करेगा या उसका ; थानांतरण नहq करेगा या दघु Oटना और ; वा; (cid:129) य क(cid:28) हािन से बचन े
क(cid:28) दिृ(cid:128) से अंगीकृत (cid:4)कसी प\ित या (cid:20)(cid:4)5या म 8बाधा नहq डालेगा।
(6) कोई भी rि", क त AO य पर रहने के दौरान >ित का-रत करने के आशय स ेकोई प थर या अ(cid:25)य अ; E नहq फ8केगा
या लड़ाई नहq करेगा या िह(cid:25)स ा म क तरीके का बताOव नहq करेगा और न ही वह (cid:4)कसी अ(cid:25) य Aय ि" को उसके क त OAय (cid:16) के
िनवOहन म 8 कोई अड़चन या बाधा डालेगा, न (cid:4)कसी अ(cid:25) य Aय ि" को अिधिनयम या तदधीन बनाए गए िनयम(cid:16) अथवा
िविनयम(cid:16) के उपबंध(cid:16) के अनुपालन करन,े या अपने क त OA य(cid:16) के िनT ठापूवOक पालन करने से रोकने क(cid:28) दिृ (cid:128) स,े (cid:4)कसी सेवा
का (cid:20);त ाव दगे ा, सेवा देगा और न उसको धमक(cid:28) दगे ा।
(7) कोई भी rि" (cid:4)कसी खतरनाक ; थान जैस े पाड़, डे-रक yलोर या 5ेन(cid:16) पर या खतरनाक या िवषलै े पदाथx के
आसपास, मशीन(cid:16), Gव ायलर(cid:16), यान(cid:16) और भारी उप; कर के पास न ही सोएगा या न ही िवNाम करेगा।
(8) (cid:20) य के rि" अपने क त AO य (cid:16) के और मौसम के अनकु ूल सरं >ा उप; कर और कपड़ ेपहनेगा।
(9) ऐसा (cid:20) य ेक Aय ि", िजस ेउसके क तOA य के दौरान कोई >ित प%चँ ती ह,ै उस >ित क(cid:28) -रपोटO यथासभं व शी(cid:149) (cid:4)कसी
पदधारी को या (cid:20)ाथिमक उपचार के(cid:25)(cid:26) के भार साधक स>म A यि" को करेगा जो >ि(cid:134) A यि" के िलए आवJ यक
(cid:20)ाथिमक उपचार क(cid:28) Aय व;थ ा करेगा।
(10) कोई भी rि", (cid:4)कसी पदधारी के (cid:20)ािधकार के िबना (cid:4)कसी बाड़, गाड Oअवरोध या फाटक को न हटाएगा अथवा न
उसस ेहोकर िनकलेगा, अथवा न ही वह (cid:4)कसी खतरे के सकं ेत को हटाएगा ।
22227777.... (cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं कककक ककककेेेे ककककतततत>>**>>** यय यय औऔऔऔरररर उउउउ2222तत तत ररररददददाााािििियययय2222वव वव ....---- (1) (cid:20)बंधक खान के समa (cid:20)बंधन, िनयंEण, पयOवे>ण और िनदशे न के
िलए उ त रदायी होगा, िजसस े यह सुिनि(cid:147)त हो सके (cid:4)क सभी काय O अिधिनयम और िविनयम(cid:16) एवं तदधीन (cid:4)कए गए
आदशे (cid:16) के उपबंध(cid:16) के अनसु ार (cid:4)कए जा रह ेह।H
(2) (cid:20)बंधक इस बात का ‘य ान रखेगा (cid:4)क अिधिनयम, उसके िविनयम(cid:16) और उसके अधीन (cid:4)कए गए आदशे (cid:16) के उपबधं (cid:16)
को (cid:4)5याि(cid:25)वत करने के (cid:20)योजन के िलए और खान और उसम8 िनयोिजत Aय ि"य(cid:16) क(cid:28) सुर>ा को सिु नि(cid:147)त करने के िलए
खान म8 समिु चत सामaी और सािधE(cid:16) के पयाOR त (cid:20)दाय क(cid:28) Aय व; था समुिचत सदा क(cid:28) जाती ह;ै और य(cid:4)द वह खान का
;व ामी या अिभकता Oनहq ह ैतथा पूवv)त (cid:20)योजन के िलए कोई ऐसी व; तु अपेि>त हो िजसके िलए आदशे दने े के िलए
वह स>म नहq ह ैतो वह ;व ामी या अिभकता O को िलिखत (cid:21)प म 8 -रपोटO करेगा तथा ऐसी (cid:20) य ेक -रपोटO क(cid:28) एक (cid:20)ित को
अनुरि>त (cid:4)कया जाएगा।
(3) (cid:20)बंधक, (cid:20) य ेक स>म rि" को उसका िविशT ट क तOA य सsपगे ा और उसक(cid:28) िनयुि" पर, उस े ऐस े िविनयम(cid:16),
िनयम(cid:16) और उपिविधय(cid:16) क(cid:28) और उनके अधीन (cid:4)कए गए (cid:4)क(cid:25) हq आदशे (cid:16) क(cid:28) जो उस पर (cid:20)भाव डालते ह(cid:16), (cid:20)ित दगे ा और
यह सिु नि(cid:147)त करन ेके िलए सब संभव कायOवाही करेगा (cid:4)क ऐसा (cid:20) यके Aय ि" उनम 8(cid:4)दए गए उपब(cid:25) ध(cid:16) को उिचत (cid:21)प स े
समझ,े कायािO (cid:25)वत करे और (cid:20)वzतत कराए।
(4) (cid:20)बंधक, ऐसी सभी -रपोटx, रिज; टर(cid:16) और अ(cid:25) य अिभलेख(cid:16) क(cid:28) िजनका अिधिनयम, उसके िविनयम(cid:16) और उनके
अधीन (cid:4)कए गए आदेश(cid:16) के अनसु रण म8 बनाया जाना या रखा जाना अपिे >त ह,ै परी>ा करेगा और उन पर तारीख के
साथ (cid:20)ितह;त ा>र करेगा:
पर(cid:25)त ,ु उन दशाu के िसवाय जहा ँ ऐसा कोई िविशT ट उपबंध बना हो जो (cid:20)बधं क (cid:31)ारा (cid:4)कसी -रपोटO या
रिज; टर का (cid:20)ित ह;त ा>-रत होना अपेि>त हो, (cid:20)बंधक उसके इस क त OA य को (cid:4)कसी उप-(cid:20)बंधक को िलिखत आदशे
(cid:31)ारा (cid:20) य ायोिजत कर सकेगा।18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) (cid:20)बंधक, (cid:4)कसी ऐस ेिविनSदTट अ(cid:150) यावेदन या िशकायत पर, जो उस ेखान के (cid:4)कसी कमकO ार (cid:31)ारा खान म 8या उसके
आसपास के Aय ि"य(cid:16) के वातावरण या उनक(cid:28) सरु >ा या उनके ; वा; (cid:129) य पर (cid:20)भाव डालने वाल े (cid:4)कसी बात क(cid:28) बावत
िलिखत (cid:21)प म 8क(cid:28) जाए, ‘य ान दगे ा या सावधानी पवू Oक अ(cid:25) वेषण कराएगा।
(6) जब खान म8 (cid:4)कसी Aय ि" को गंभीर शारी-रक >ित या जीवन-हािन करने वाली कोई दघु टO ना हो जाए, तब
(cid:20)बंधक यथासभं व शी(cid:149) दघु Oटना-;थ ल का िनरी>ण करेगा और वह, या तो ; वयं या सुर>ा अिधकारी सेया उसके (cid:31)ारा
स(cid:18)य क (cid:21)प से ग-ठत जाँच सिमित के मा‘ यम से दघु Oटना के कारण(cid:16) और प-रि;थितय(cid:16) क(cid:28) जाचँ करेगा या करवाएगा और
ऐसी (cid:20) य ेक जाँच के प-रणाम और दघु Oटना ;थ ल का रेखाकं तथा भाग दzशत करते %ए G यौरे घटना क(cid:28) तारीख से तीस
(cid:4)दन के भीतर >ेEीय िनरी>क को (cid:20);त तु (cid:4)कए जाएँगे।
(7) (cid:20)बंधक, ऐसे अ(cid:25)य क त OAय (cid:16) का पालन करेगा जो इस िनिम त अिधिनयम, उसके िविनयम(cid:16) और उनके अधीन (cid:4)कए
गए आदशे (cid:16) के अधीन िविनSदTट (cid:4)कए गए ह(cid:16)।
(8) (cid:20)बंधक, अिधिनयम या उसके िविनयम(cid:16) और उनके अधीन (cid:4)कए गए आदशे (cid:16) के उपबंध(cid:16) म 8 स े (cid:4)कसी का उ(cid:6) लघं न
करने के िलए कमOकार(cid:16) को जो वह ठीक समझे िनलिं बत कर सकेगा या उनके िव(cid:21)\ अनुशासिनक कारOवाई या उसक(cid:28)
अनुशसं ा कर सकेगा।
(9) (cid:20)बंधक, खान का बारंबार िनरी>ण करेगा और अपने (cid:20) यके िनरी>ण के िनTकषx का -रपोटO रखेगा और उसम 8
अपन े(cid:31)ारा उि(cid:6)लिखत E-ु टय(cid:16) क(cid:28), य(cid:4)द कोई हो, सुधार करन ेम 8क(cid:28) गई कारOवाई को भी अिभिलिखत करेगा।
(10) (cid:20)बंधक, खतरनाक (cid:20)कृित के स(cid:4)ं 5याu क(cid:28) पहचान करेगा और सं(cid:4)5या स े जुड़ े Aय ि"य(cid:16) (cid:31)ारा पालन (cid:4)कए जान े
हते ु अिधिनयम, िविनयम(cid:16) व तदधीन (cid:4)कए गए आदशे (cid:16) के समनु(cid:21)प ''A यवहार संिहता'' के बनान े और उनको A यवहार म 8
लाए जान ेको सिु नि(cid:147)त करेगा।
22228888.... उउउउपपपप (cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं कककक ककककेेेे ककककततततDD**DD** औऔऔऔरररर उउउउ2222तत तत ररररददददाााािििियययय2222वव वव ....---- (1) उप-(cid:20)बंधक, (cid:20)बंधक (cid:31)ारा उस े सsप े गए कतOAय (cid:16) का िनवOहन करेगा
और यह सुिनि(cid:147)त करेगा (cid:4)क खान के उस भाग या उन सं; थापन(cid:16) म8 जो उस े (cid:20)बधं क (cid:31)ारा सsपे गए ह,H सभी काय O
अिधिनयम तथा िविनयम(cid:16) के उपबंध(cid:16) या तदधीन (cid:4)कए गए आदशे (cid:16) के अनसु ार (cid:4)कए जाएँ।
(2) उप (cid:20)बंधक –
(क) यह सुिनि(cid:147)त करेगा (cid:4)क खान के उस भाग म 8जो उसे उप-िविनयम (1) के अधीन सsपा गया ह,ै सभी सं(cid:4)5याए ँइन
िविनयम(cid:16) के अधीन बनाए गए Aय वहार सिं हता के अनसु ार िनTप ा(cid:4)दत (cid:4)कए जा रह ेह;H
(ख) (cid:20)बंधक के आदशे (cid:16) के अधीन रहते %ए, अपने भारसाधनाधीन खान के भाग तथा सं; थापन या उसके भाग का
प-रदशOन करेगा और उनक(cid:28) परी>ा करेगा;
(ग) अपने िनरी>ण(cid:16) म 8 से (cid:20) य के का प-रणाम तथा उसम8 पाई गई Eु-टय(cid:16) के, य(cid:4)द कोई हो, िनराकरण क(cid:28) (cid:4)दशा म8 क(cid:28)
गई कारOवाई का िव;त ृत -रपोटO अनुरि>त करेगा;
(घ) यह सुिनि(cid:147)त करेगा (cid:4)क जब भी (cid:4)कसी वेधन-रग, वकO ओवर -रग और सबं \ उप; कर, उ पादन के उप; कर या
पाईप लाइन अंत-रत या नये ;थािपत (cid:4)कए जात ेह,H तो उसे उपयोग म 8लाए जाने से पूवO परी>ण ; व(cid:21)प चलाया गया ह;ै
(ड.) (cid:20)बंधक क(cid:28) अनुपि;थित म,8 उप (cid:20)बंधक का वही उ तरदािय व होगा, वह उ(cid:25) हq क तOA य(cid:16) का िनवOहन करेगा और
उ(cid:25)ह q दािय व (cid:16) के अधीन रहगे ा जो (cid:20)बधं क के होत े ह,H पर(cid:25)त ु इसस े (cid:20)बंधक को उन िज(cid:18)म ेदा-रय(cid:16) स े छुटकारा नहq
िमलेगा।
22229999.... सससस++ंं++ंं थथथथाााापपपपनननन (cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं कककक ककककेेेे ककककतततत>>**>>** यय यय औऔऔऔरररर उउउउ2222 तत त तररररददददाााािििियययय2222वव वव ....---- सं;थापन (cid:20)बंधक –
(क) ऐसे सं;थ ापन(cid:16) का उ त रदािय व पूणO भारसाधन करेगा और उस पर िनयंEण रखेगा और ऐस े कतOAय (cid:16) का पालन
करेगा जो (cid:20)बंधक (cid:31)ारा उस ेसौप8 जाए;ँ
(ख) इस बात को सुिनि(cid:147)त करेगा (cid:4)क उसे सsपे गए सं;थ ापन म 8 सब काय,O अिधिनयम या उसके िविनयम(cid:16) और उनके
अधीन (cid:4)कए गए आदशे (cid:16) के उपब(cid:25)ध (cid:16) के अनसु ार (cid:4)कया जा रहा ह;ै¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 19
(ग) यह सिु नि(cid:147)त करेगा (cid:4)क उपबंध (क) के अधीन उसे सsपे गए स;ं थापन/सं; थापन(cid:16) या खान के भाग म8 सभी स(cid:4)ं 5या
इन िविनयम(cid:16) के Aय वहार संिहता के अनु(cid:21)प िनT पा(cid:4)दत (cid:4)कए जा रह ेह;H
(घ) यह सुिनि(cid:147)त करेगा (cid:4)क उसक(cid:28) िनयिु " क(cid:28) सूचना काय O >ेE पर उपलGध ह ैऔर उसका नाम सं;थ ापन/सं;थ ापन(cid:16)
म 8(cid:4)कसी ;थ ान पर ऐस ेअव;थ ान म8 (cid:20)दzशत (cid:4)कया गया हो (cid:4)क इसे सिु वधा और आसानी स ेपढ़ा जा सके;
(ड.) (cid:20) य के काय(cid:4)O दवस पर अपन े भारसाधन के अधीन सं; थापन/स;ं थापन(cid:16) या उसके भाग का िनरी>ण और पड़ताल
यह सिु नि(cid:147)त करने के िलए करेगा (cid:4)क सुर>ा का पालन हर तरह स े(cid:4)कया जा रहा ह;ै
(च) अपन े िनरी>ण(cid:16) म 8 स े (cid:20) य के का प-रणाम तथा उसम8 पाई गई Eु-टय(cid:16) के, य(cid:4)द कोई हो, िनराकरण क(cid:28) (cid:4)दशा म 8
उसके (cid:31)ारा क(cid:28) गई कारOवाई का िव;त तृ -रकॉड Oअनरु ि>त करेगा;
(छ) यह सुिनि(cid:147)त करेगा (cid:4)क जब (cid:4)कसी वधे न -रग, वकO-ओवर -रग और सहब\ उप;क र या उ पादन उप; कर या
पाईप लाइन का अंतरण (cid:4)कया जाता ह ै या उसे नए (cid:21)प म8 सं; थािपत (cid:4)कया जाता ह ै तब उसका उपयोग (cid:4)कए जाने स े
पहले उसके या उसके (cid:31)ारा (cid:20)ािधकृत Aय ि" के पयOवे>ण म 8उस ेपरी>ाणाथO चलाया जाता ह;ै
(ज) यह सिु नि(cid:147)त करेगा (cid:4)क सं;थ ापन म 8 िनयोिजत सभी A यि"य(cid:16) को Gल ोआउट और अि(cid:133) को रोकन ेसे संबिं धत, इन
िविनयम(cid:16) के अधीन (cid:4)कए गए ;थ ायी आदशे (cid:16), मानक (cid:20)चालन कायO िविध, A यवहार संिहता एवं आपात योजना के
उपब(cid:25)ध (cid:16) के बारे म8 अ(cid:130)छ ी तरह स ेअनुदशे द े(cid:4)दया गया ह ैऔर जानकारी द ेदी गई ह;ै
(झ) यह सुिनि(cid:147)त करेगा (cid:4)क अिधिनयम और िविनयम(cid:16) या उनके अधीन (cid:4)कए गए आदशे (cid:16) स े मशीनरी और उप; कर के
सं;थ ापन, अनरु >ण, (cid:20)चालन या परी>ा स े संबिं धत उपबंध ; वय ं अपने (cid:31)ारा या यथाि;थित, इस (cid:20)योजन के िलए
िनयु)त पदधा-रय(cid:16), स>म Aय ि"य(cid:16) या कमकO ार(cid:16) (cid:31)ारा उिचत (cid:21)प स ेपालन (cid:4)कए जात ेह;H
(ञ) जब (cid:4)कसी सं;थ ापन के सिं नमाणO या (cid:4)कसी (cid:20)चालन थेरीट के दौरान ऐसी कोई आपात ि;थित या आश(cid:4)ं कत आपात
ि;थित ह ै िजसस े (cid:4)कसी Aय ि" के जीवन या उसक(cid:28) सरु >ा या सं; थापन क(cid:28) ि;थरता और सुर>ा का सकं टाप(cid:25) न होता ह ै
तब वह ;व यं ऐस ेउपाय करेगा या ऐस ेउपाय करवाएगा जो आपात ि;थित स ेबचन ेके िलए आवJ यक या समीचीन ह।ै
33330000.... ससससररुुररुु (cid:22)(cid:22)(cid:22)(cid:22)ाााा अअअअििििधधधधककककााााररररीीीी ककककेेेे ककककतततत>>**>>** यय यय ....---- (1) सुर>ा अिधकारी –
(क) िजतनी बार आवJय क हो, खान के सं;थ ापन(cid:16) का इस दिृ(cid:128) से िनरी>ण करेगा, िजसस े (cid:4)क वह ऐस ेअ(cid:20)कट खतर(cid:16) को
प-रलि>त कर सके जो (cid:4)कसी Aय ि" क(cid:28) शारी-रक >ित या उसके ; वा; (cid:129) य का (cid:152)ास का-रत कर सक8गे या वातावरण के
िलए >ित कारक ह(cid:16)ग;े
(ख) खतरनाक ि;थितय(cid:16) को रोकन ेके िलए आवJयक उपाय(cid:16) पर (cid:20)बंधक को सलाह दगे ा;
(ग) उन सभी दघु Oटनाu क(cid:28), चाह ेउनम8 Aय ि" अ(cid:25) तवOिलत ह(cid:16) या नहq, प-रि;थितय(cid:16) और कारण(cid:16) क(cid:28) जाँच करेगा और
ऐसी दघु Oटनाu क(cid:28) पुनरावृि(cid:134) को रोकने के िलए आवJ यक उपाय(cid:16) पर (cid:20)बंधक या उप-(cid:20)बंधक को सलाह दगे ा;
(घ) सुर>ा प\ितय(cid:16) म 8अिभविृ \ करने और काय Oकरण(cid:16) पयाOवरण म8 सुधार करने क(cid:28) दिृ(cid:128) से दघु Oटनाu और खतरनाक
घटनाu के संबंध म 8जानकारी इकmा करेगा, उसका सकं लन और िवJ लेषण करेगा;
(ड.) खान म8 कायOरत rि"य(cid:16) के बीच सुर>ा के (cid:20)ित जाग(cid:21)कता को बढ़ावा दने े के िलए िनयिमत (cid:21)प स ेसुर>ा िश>ा
कायO5म और सरु >ा अिभयान(cid:16) का आयोजन करेगा;
(च) यह सिुनि(cid:147)त करेगा (cid:4)क सभी नए कमकO ार(cid:16) और ऐस ेकमकO ार(cid:16) को िज(cid:25)ह 8नए काम पर अतं -रत (cid:4)कया गया ह,ै उ(cid:25)ह 8
सुर>ा, अि(cid:133)शमन और (cid:20)ाथिमक उपचार म 8पयाORत (cid:20)िश>ण (cid:20)ाR त होता ह;ै
(छ) अपन े(cid:31)ारा िनTप ा(cid:4)दत काय Oका Gय ौरेवार -रपोटO करेगा।
(2) सुर>ा अिधकारी को उसके कतrO (cid:16) के िनवOहन के िलए पयाOI सं}या म8 सहायक(cid:16) क(cid:28) सहायता (cid:20)ाRत होगी।
(3) उप-िविनयम (1) म 8िविनSद(cid:128) कतOA य(cid:16) स ेिभ(cid:25) न कोई अ(cid:25)य कतOA य सरु >ा अिधकारी को नहq सsपा जाएगा ।20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
33331111.... अअअअिििि@@@@शशशशममममनननन अअअअििििधधधधककककााााररररीीीी ककककेेेे कककक2222तत तत **>>*>*>यय यय ....---- (1) अि(cid:133)शमन अिधकारी –
(क) इस अिधिनयम, िविनयम(cid:16) और उनके अधीन (cid:4)कए गए आदशे (cid:16) के आग का पता चलान,े अि(cid:133)शामक प\ित और
आपात योजना से संबिं धत उपब(cid:25)ध (cid:16) का पालन सुिनि(cid:147)त करेगा और आग मYे पयाOR त सरं >ा सिु नि(cid:147)त करने के िलए
आवJय क उपाय(cid:16) पर (cid:20)बंधक या उप-(cid:20)बंधक को सलाह दगे ा।
(ख) सुिनि(cid:147)त करेगा (cid:4)क अि(cid:133)शमन के िलए A यवहार सिं हता बनाया एवं कायािO (cid:25)वत (cid:4)कया गया ह;ै
(ग) अि(cid:133) शामक उप;क र का उिचत अिभ(cid:25) यास, सं; थापन और अनरु >ण सिु नि(cid:147)त करेगा;
(घ) सुिनि(cid:147)त करेगा (cid:4)क सभं ाAय अि(cid:133) के िलए पहले से ही आपात योजना तैयार कर ली गई ह;ै
(ड.) (cid:20)ारंिभक अि(cid:133)शामक कतOAय (cid:16) के भारसाधक A यि"य(cid:16) का िनयिमत (cid:20)िश>ण, िविशT टतया अि(cid:133) के िलए आपात
योजना, सही आकलन लगान ेऔर अि(cid:133) से संबंिधत सम; याu स ेिनपटने के संदभ Oम,8 आयोिजत करेगा;
(च) यह सुिनि(cid:147)त करेगा (cid:4)क अि(cid:133) शामक कतOA य(cid:16) के भारसाधक A यि" कम से कम (cid:20) यके मास म 8एक बार नकली आग
संबंधी अ(cid:150)य ास कर8 िजसस े (cid:4)क आग लगने पर उनक(cid:28) (cid:20)ित(cid:4)5या क(cid:28) त प रता और (cid:20)भावी यिु "य(cid:16) का अ‘ ययन (cid:4)कया जा
सके;
(छ) (cid:20) य के िEमास म8 कम से कम एक बार खान म 8 आग का पता लगाने तथा अि(cid:133)शामक प\ितय(cid:16) क(cid:28) सभी युि"य(cid:16)
और उप;क र का िनरी>ण करेगा और उनम 8(cid:4)कसी Eु-ट के बारे म 8(cid:20)बंधक या उप-(cid:20)बंधक को -रपोटO करेगा;
(ज) खान म8 कोई आग लगन े के दौरान उसके िनयंEण और बुझाने का सामा(cid:25) य पयOवे>ण और सम(cid:25) वय का (cid:20)योग
करेगा;
(झ) आग लगन े के सभी कारण(cid:16) और प-र;थ ितय(cid:16) क(cid:28) इस दिृ(cid:128) से जाचँ करन े म 8 (cid:20)बंधक या इस िनिमत (cid:20)ािधकृत अ(cid:25) य
पदधारी को सहायता करेगा िजसस े(cid:4)क भिवT य म8 आग लगने को रोका जा सके;
(ञ) अपन े(cid:31)ारा िनTप ा(cid:4)दत काय Oका Gय ौरेवार -रपोटO रखेगा।
(2) उप-िविनयम (1) म 8िविनSद(cid:128) कतOA य(cid:16) स ेिभ(cid:25) न अि(cid:133)शमन अिधकारी को अ(cid:25)य कोई भी कतOAय नहq सsपा जाएगा।
33332222.... ककककूूूूपपपप ििििछछछछCCCCणणणण ककककेेेे ििििललललएएएए सससस(cid:22)(cid:22)(cid:22)(cid:22)मममम DDDDिििि4444यययय???? ककककेेेे ककककतततत>>**>>** यय यय ययययाााा उउउउ2222तत तत ररररददददाााािििियययय2222वव वव ....---- (1) िविनयम 20 के उप िविनयम (1) के
अधीन िनयु)त या (cid:20)ािधकृत (cid:4)कए गए स>म A यि", इन िविनयम(cid:16) एवं तदधीन (cid:4)कए गए आदशे (cid:16) के अधीन खान म8
िव;फ ोटक(cid:16) के संचलन, प-रवहन तथा इ; तेमाल तेल आयोग सुर>ा िनदशे ालय मानक, OISD-STD-191 या उसके
संशोिधत (cid:21)प, के अनु(cid:21)प करन ेके िलए उ तरदायी होगा।
(2)कूप िछ(cid:26)ण के िलए स>म Aय ि" –
(क) अपने सहायक(cid:16), य(cid:4)द कोई ह(cid:16), (cid:31)ारा वैस े उपबंध(cid:16) और सरु >ा संबंधी (cid:4)क(cid:25) हq (cid:4)दशा-िनदशw (cid:16) के अनुपालन के िलए
उ त रदायी होगा, जो उ(cid:25)ह 8 व-रTठ पदधा-रय(cid:16) (cid:31)ारा (cid:4)दए जा सकत ेह;H
(ख) कोई िव;फ ोटक (cid:4)कसी भी अनिधकृत rि" को नहq सsपेगा;
(ग) शॉटिछ(cid:26)(cid:16) को भरत ेसमय वहाँ ;व यं उपि;थ त रहगे ा तथा उ(cid:25) ह 8; वयं दागेगा; और
(घ) (cid:4)कसी शॉट के िमसफायर होने पर यह ‘ यान रखने के िलए (cid:4)क ब(cid:25) दकू को सुरि>त तरीके से िनर(cid:153) कर (cid:4)दया जाए,
उ त रदायी होगा ।
33333333.... सससस(cid:22)(cid:22)(cid:22)(cid:22)मममम >>>>यय यय िििि4444यययय???? ककककेेेे ककककतततत>>**>>** यय यय ....---- (1) (cid:20) य के स>म A यि" व-रT ठ पदधारी के आदेश(cid:16) के अधीन होगा और वह उस े सsप े गए
कतOAय (cid:16) का अिधिनयम तथा िविनयमय(cid:16) या तदधीन (cid:4)कए गए आदशे (cid:16) के अनसु ार िनT पा(cid:4)दत करेगा।
(2) स>म rि" –
(क) अपन ेव-र(cid:154) पदधारी क(cid:28) मंजूरी के िबना अपना कायO करन ेके िलए दसू रे A यि" को (cid:20)ितिन यु)त नहq करेगा;
(ख) अपन ेव-रTठ पदधारी स ेपूवO अनु(cid:127)ा (cid:20)ाR त (cid:4)कए िबना स(cid:18) यक (cid:21)प स े(cid:4)कसी स>म A यि" (cid:31)ारा अवमु) त %ए िबना,
अनुपि;थत नहq रहगे ा; और¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 21
(ग) ऐसे पदधारी क(cid:28) अन(cid:127)ु ा के िबना, अपनी पारी के दौरान उन कतOव् य(cid:16) स ेिभ(cid:25)न कोई कतOA य नहq करेगा िजनके िलए
उसे िनयु)त (cid:4)कया गया ह।ै
(3) वह अपन ेकायO करने वाले ;थ ान पर कोई जोिखम वाली प-र; थित होन े पर उस जोिखम को दरू करने के िलए तरु (cid:25)त
सुधार संबंधी उपाय करेगा।
अअअअ(cid:15)(cid:15)(cid:15)(cid:15)यय यय ाााायययय –––– 5555
ववववधधेेधधेे नननन औऔऔऔरररर ववववकककक****ओओओओववववरररर
33334444.... डडडड(cid:29)(cid:29)ेे(cid:29)(cid:29)ेेररररकककक ....----(1) ड-े रक, म;त लू और उपसंरचना का (cid:20) यके भाग ठोस बनावट और सश) त होगा, जो उस अिधकतम
भार मानदडं के अनकु ूल होगा िजसके िलए इसे अिभकि(cid:6)पत (cid:4)कया गया ह ै और उस े हमेशा काम करन े क(cid:28) िनरापद
दशा म8 बनाए रखा जाएगा।
(2) ड-े रक को उलटन ेस ेरोकन ेके िलए पयाOR त (cid:21)प से सरु ि>त (cid:4)कया जाएगा।
33335555.... डडडड(cid:29)(cid:29)ेे(cid:29)(cid:29)ेेररररकककक ममममचचंंचचंं औऔऔऔरररर KKKKललललोोोोरररर ....---- (1) (cid:20) य के ड-े रक या सुवा(cid:132) दडं पर 5ाउन G लॉक के सभी तरफ कम स ेकम 0.60 मीटर
चौड़ा एक मंच के बाहरी कोर(cid:16) पर कम से कम एक मीटर ऊँची दो छोड़(cid:16) वाली रेbलग और 0.15 मीटर ऊँचा टी-बोड O
ह(cid:16)गे।
(2) (cid:20) य के ड-े रक पर rि"य(cid:16) के ड-े रक म 8या उसके ऊपर रखी गई पाईप या अ(cid:25) य उप;क र सभं ालने के समय खड़ े
होने के िलए एक मंच क(cid:28) Aय व;थ ा क(cid:28) जाएगी, जो मंच के कायकO रण कोर ड-े रक के पद ; तभं (cid:16) और गेट(cid:16) के पीछे वाल े
;थ ान को पूणO (cid:21)प स ेआ(cid:130)छ ा(cid:4)दत कर8गे तथा उ(cid:25) ह 8मजबूती से बांधा जाएगा।
(3) मंक(cid:28) बोड O मंच(cid:16) के कायकO रण कोर को इस (cid:20)कार रखा जाएगा िजसस े (cid:4)क चल Gल ॉक के सरु ि>त मागO के िलए
पयाORत ;थ ान रह।े
(4) मंच(cid:16), yलेट(cid:16) और पैदल-मागx के खतरनाक बिहविw शन(cid:16) या बाधाu से मु) त रखा जाएगा और उ(cid:25) ह 8 इस (cid:20)कार
रखा जाएगा (cid:4)क (cid:4)फसलन से बचन ेके िलए पयाORत सरं >ण (cid:4)दया जाए।
33336666.... ससससीीीी;;;;ढ़ढ़ढ़ढ़ ययय याााा ंं ंं....---- (1) (cid:20) यके ड-े रक पर सीढ़ी का (cid:20)बधं (cid:4)कया जाएगा िजसस े (cid:4)क सभी उ थ ािपत चलता और कायकO रण
मंच(cid:16) तक सुरि>त प%चँ सिु नि(cid:147)त क(cid:28) जा सके।
(2) कायOकरण मंच(cid:16) पर सीढ़ी (cid:31)ारा प%चँ को रेbलग(cid:16) और टो-बोडx से उिचत (cid:21)प से सुरि>त (cid:4)कया जाएगा।
(3) (cid:20) य के सीढ़ी के डडं ेएक दसू रे से समान दरू ी पर ह(cid:16)गे और (cid:20) य ेक सीढ़ी से) सन का ऊपरी छोर मचं के ऊपर एक
मीटर से अ(cid:25)य ून बढ़ा %आ होगा।
(4) छह मीटर से अिधक क(cid:28) सीि़ढय(cid:16) पर अिधक से अिधक नौ मीटर क(cid:28) अिवि(cid:130)छन लंबाई तक अवतरण मंच(cid:16) या
bपजर(cid:16) क(cid:28) Aय व;थ ा क(cid:28) जाएगी:
पर(cid:25)त ,ु जहा ँ ऐसे सी(cid:4)ढय(cid:16) पर िनजी अवपात अवरोध (cid:20)णाली का A यवहार (cid:4)कया जाए, वहा ँ अवतरण मंच(cid:16)
तथा bपजर(cid:16) क(cid:28) Aय व;थ ा (cid:4)कए जान ेक(cid:28) अपे>ा नहq भी क(cid:28) जा सकती ह।ै
(5) सभी अवतरण मंच को रेbलग(cid:16) और टी-बोडx स े लसै करके ऐसी A यव; था क(cid:28) जाएगी िजससे (cid:4)क सीढ़ी तक
सुरि>त प%ँच हो सके।
(6) ड-े रक मंच स े मंक(cid:28) बोड O को प%चँ ती सभी सी(cid:4)ढ़ या ँ ऐसी अवपातरोधी यिु " के साथ A यवि;थत ह(cid:16)गी जो
rि"य(cid:16) को िगरने स ेरोकने के िलए अनु(cid:20)योc य भारतीय या अंतराO(cid:145)ीय मानक (मानक(cid:16)) के अनुसार हो।
33337777.... ससससररुुररुु (cid:22)(cid:22)(cid:22)(cid:22)ाााा पपपप(cid:29)(cid:29)ेे(cid:29)(cid:29)ेे टटटटययययाााा ँँ ँँऔऔऔऔरररर बबबबचचचचाााावववव----ररररिििि++++ससससययययाााा ँँ ँँ....---- (1) ऐसे (cid:20) य ेक rि" को, जो ड-े रक के (cid:20)थम गटO के ऊपर कायO कर रह ेह,H
भारतीय मानक Gय ूरो के IS-3521 या उसके सशं ोिधत सं;क रण के अनुसार (cid:20)मािणत फुल बॉडी हारनेस वाली
सुर>ापेटी और बचाव-र;स ी क(cid:28) Aय व; था क(cid:28) जाएगी और वह उसका उपयोग तब तक करेगा जब तक (cid:4)क उस े ऊंचाई
से िगरन ेके खतरे स ेअ(cid:25)य था सरु ि> त नहq (cid:4)कया जाता ह ै।22 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) कोई भी rि" वहाँ जहाँ उसका 1.8 मीटर स ेअिधक ऊँचाई से िगरना संभाAय ह,ै तब तक काय O या याEा नहq
करेगा जब तक (cid:4)क वह (cid:20)मािणत फुल बॉडी हारनसे वाली सरु >ा पेटी और बचाव-र;स ी (cid:31)ारा संरि>त न (cid:4)कया गया
हो और वह कायO के दौरान उसका उपयोग करेगा।
33338888.... आआआआपपपपाााातततत बबबबचचचचाााावववव ययययििुुििुु4444 ....---- (1) (cid:20) यके मकं (cid:28) बोड O पर पयाORत (cid:21)प स े सश) त सरकन े वाला बचाव यिु " के साथ एक
बचाव र;स ी ऐसा स;ं थ ािपत और अनरु ि>त (cid:4)कया जाएगा, जो मु} य िनरी>क (cid:31)ारा उस (cid:20)योजन से (cid:4)कसी सामा(cid:25) य
या िवशेष आदशे (cid:31)ारा िविनSदTट मानक का होगा और िजससे A यि) ा आपात क(cid:28) दशा म8 मंक(cid:28) बोड O से भ-ू तल तक
सुरि>त तरीके से नीच ेआ सक8।
(2) बचाव रcज ू को मकं (cid:28) बोड Oके ठीक ऊपर गटO के साथ सश)त (cid:21)प से बाधँ ा जाएगा और उस ेजमीन पर लंगर क(cid:28)
भाँित सले र गतO के के(cid:25)(cid:26) से ऐसी दरू ी पर ि;थर (cid:4)कया जाएगा जो जमीन से मंक(cid:28) बोड Oक(cid:28) ऊँचाई स ेकम नहq होगा।
(3) स}त अवतरण स े बचन े के िलए अवतरण ; थल पर पयाOI माEा म 8 बाल ू या अ(cid:25)य उपयु" सामaी उपलGध
करायी जाएगी, िजससे ;थ ल गYेदार हो।
(4) एक स>म rि", आपात बचाव यिु " और उसके (cid:131)के (cid:20)णाली के (cid:20) य ेक भाग का, मलू उप;क र िविनमाOता के
िनरी>ण एवं रख-रखाव (cid:4)दशा िनदशw (cid:16) के अनसु ार, िनरी>ण करेगा और इस (cid:20)कार के (cid:20) य के िनरी>ण का -रकाड O
िनरी>ण करने वाले Aय ि" (cid:31)ारा रखा जाएगा।
(5) आपात बचाव यिु " के pैक र; से को पवू -O कसाव के कारण तनाव से बचान े के िलए इसम8 पयाOI िशिथलता
होगी।
(6) pैक र;स ा या उसके (cid:4)कसी िह;स ेपर (cid:4)कसी (cid:20)कार क(cid:28) >ित या उलझाव नहq होगा।
(7) आपात बचाव यिु " के (cid:131)के इकाई क(cid:28) पुिलय(cid:16) को (cid:20) यके ;थ ापना स ेपूव Oम"ु घणू Oन के िलए जाँचा जाएगा और
उ(cid:25)ह 8(cid:4)कसी भी िघसाव के िलए जाँचा जाएगा और उस े(cid:4)फसलन स ेमु)त करन ेके िलए साफ (cid:4)कया जाएगा।
33339999.... भभभभाााारररर ससससचचूूचचूू कककक ....---- (1) (cid:20) य के वधे न -रग पर एक भार सचू क क(cid:28) Aय व;थ ा क(cid:28) जाएगी और उसका उपयोग उ त ोलन र;स ी
से लटके %ए भार का सू(cid:136)म सूचन दज Oकरने के िलए (cid:4)कया जाएगा।
(2) भार सूचक को चालू ि;थित म8 रखा जाएगा और छह माह से अनिधक के अ(cid:25)त राल पर अंशशोिधत (cid:4)कया जाएगा।
44440000.... बबबबचचचचाााावववव ििििननननककककाााासससस ....---- -रग yलोर >ेE और (cid:20) यके [ॉ-व)स O इंजन yलोर >ेE म8 कम स े कम दो बचाव िनकास -रग के
दसू री ओर ह(cid:16)ग,े िजससे (cid:4)क बरे ोक बचाव हो सके।
44441111.... जजजजगगंंगगंं लललल,,ेे,,ेे ककककटटटटघघघघररररेेेे औऔऔऔरररर आआआआड़ड़ड़ड़ ेे ेे....---- (1) yलोर खलु ी जगह(cid:16) और yलो-िछ(cid:26)(cid:16) को मानक रेिलग और टो-बोड O (cid:31)ारा या आड़
(cid:31)ारा रि>त (cid:4)कया जाएगा।
(2) पाJव O;थ yलेार या भूिम तल के 1.8 मीटर या अिधक ऊपर (cid:4)कनारे स ेखुले %ए (cid:20) येक yलोर या मचं को मानक
रेbलग (cid:31)ारा रि>त (cid:4)कया जाएगा।
(3) सभी पंक टंक(cid:28) के भाग(cid:16) के भीतर तब तक मानक रेbलग क(cid:28) A यव; था क(cid:28) जाएगी जब तक (cid:4)क पकं टं(cid:4)कय(cid:16) म 8
(cid:4)कसी Aय ि) ा को िगरने से रोकने के िलए कोई अ(cid:25) य साधन उपलG ध नहq कर (cid:4)दया जाता।
(4) खतरनाक उप;क र और इसी (cid:20)कार क(cid:28) जोिखम वाली व; तु के ऊपर या उसके पाTव O; थ (cid:4)कनारे स े खलु े %ए
yलोर(cid:16), पैदल मागx, मंच(cid:16) या मागx को मानक रेिलग और टो-बोड O(cid:31)ारा रि>त (cid:4)कया जाएगा।
44442222.... MMMMॉॉॉॉ----ववववOOOOसस सस ** **....---- (1) [ॉ-व)स O के साथ एक उपयु) त यिु " लगाई जाएगी िजसका िनयंEण वेधन करन े वाल े A यि" के
;ट ै(cid:141) ड के पास होगा िजसस े(cid:4)क आपात क(cid:28) ि;थित म8 कषणO सकं मO को रोका जा सके।
(2) (cid:4)कसी भी [ॉ-व)स O का (cid:20)चालन तब तक नहq (cid:4)कया जाएगा जब तक (cid:4)क उसके सभी गाड Oअपने ;थ ान पर और
चाल ूहालत म 8न ह(cid:16)।
(3) य(cid:4)द (cid:157)ेहन (cid:4)फoटग, गाड Oके ;थ ान स े प%चँ के नहq ह ै तो मशीनरी को तेल डालन ेऔर aीस लगान ेके िलए रोक
िलया जाएगा।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 23
(4) [ॉ-व)स O के (cid:131)के (cid:16), बंधनी और yल8ज(cid:16) क(cid:28) (cid:4)कसी स>म Aय ि" (cid:31)ारा (cid:20) यके चौबीस घ(cid:141) टे म8 कम से कम एक बार
परी>ा क(cid:28) जाएगी और य(cid:4)द ऐसी परी>ा के दौरान (cid:4)कसी Eु-ट का पता चलता ह ै तो [ॉ-व) स O का उपयोग तब तक
नहq (cid:4)कया जाएगा जब तक (cid:4)क ऐसी Eु-ट को दरू नहq कर (cid:4)दया जाता।
(5) उप-िविनयम (4) के अधीन िविनSद(cid:128) ऐसी (cid:20) यके परी>ा के प-रणाम को िनरी>ण करने वाल े स>म rि"
(cid:31)ारा -रकॉड O(cid:4)कया जाएगा।
(6) [ॉ-व)स O के साथ कोई ऐसी ;व चािलत युि" लागाई जाएगी जो (cid:4)क एक छोर पर pेवbलग G लॉक को 5ाउन
Gल ॉक से दो मीटर के भीतर आने से और दसू रे छोर पर घूणl टेबल को >ितa; त होन ेस ेरोके।
44443333.... ककककैैैैटटटटहहहहेडेडेडेड औऔऔऔरररर ककककैैैैटटटटललललााााइइइइनननन ....---- (1) ह;त -चािलत कैटहडे को लाइन या र;स े के (cid:20)थम आवरण का पृथ) करण सुिनि(cid:147)त करन े
के िलए एक गाइड िवभाजक स ेलैस (cid:4)कया जाएगा।
(2) कैटहैड क(cid:28) मु}य सीट और (cid:20)े>ेपी कुंजी को िचकने िथ(cid:18) बल या Rल ेट से आ(cid:130)छ ा(cid:4)दत (cid:4)कया जाएगा।
(3) जब कोई कैटहडे (cid:20)योग म8 हो तब उसके िनयंEण(cid:16) पर एक स>म A यि" होगा और (cid:4)कसी आपात क(cid:28) दशा म 8वह
कैटहडे के घूणOन को तरु (cid:25)त बंद कर दगे ा।
(4) कैटहेड का (cid:20)चालक अपने (cid:20)चालन >ेE को साफ रखेगा और कैटलाइन के न उपयोग (cid:4)कए जानवे ाले भाग को
कुंडिलत या लपेटे रखेगा।
44444444.... टटटटPPPPगगगग ....---- (1) पाईप के जोड़(cid:16) को जोड़न ेया िवयोिजत करन ेके दौरान पाईप(cid:16) के अिनयिं Eत घूणनO को (cid:20)भावी ढंग स े
रोका जाएगा और जब कभी आवJय क हो एक बकै -अप ट(cid:16)ग का उपयोग इस (cid:20)योजन के िलए (cid:4)कया जाएगा।
(2) टsग को (cid:20)ितसतं िुलत करन े वाल े भार और लाइन(cid:16) पर आकि;मक स;ं प श Oको रोकन ेके िलए गाडx क(cid:28) Aय व;थ ा
क(cid:28) जाएगी।
(3) ट(cid:16)ग के सुर>ा लाइन(cid:16) के िसर(cid:16) को कम स े कम तीन वायर लाइन ) लHप(cid:16) से जकड़ा जाएगा या (cid:137)5प करके रखा
जाएगा।
44445555.... ससससररुुररुु (cid:22)(cid:22)(cid:22)(cid:22)ाााा चचचचननेेननेे ययययाााा ववववााााययययरररर ललललााााइइइइनननन 33 33....---- सभी टsग, घुणl होज के िसर(cid:16) और लटक(cid:28) %ई चरिखय(cid:16) म 8सरु >ा चेन या वायर-लाइन 8
लगाई जाएगँ ी।
44446666.... ककककेेेेRRRRससससगगगग ललललााााइइइइनननन33 33 ....---- (1) सभी केbसग लाइन,8 (cid:4)कसी स>म A यि" (cid:31)ारा सात (cid:4)दन(cid:16) म 8 कम स े कम एक बार (cid:20) य> (cid:21)प
स े जाँच े जाएँग े तथा तार के िघसाव, >रण, भंगुरण एव ं िवभंजन क(cid:28) ि;थित को दज O (cid:4)कया जाएगा और जाँच करन े
वाला Aय ि" ऐसे (cid:20) य ेक जाँच -रपोटO का एक -रकॉड Oरखेगा।
(2) य(cid:4)द (cid:4)कसी िनरी>ण के दौरान, ऐसी कोई E-ु ट या कमजोरी पाई जाती ह ैिजससे (cid:4)कसी A यि" क(cid:28) सरु >ा खतरे
म 8पड़ सकती ह,ै तो वैस ेकमजोरी या Eु-ट क(cid:28) -रपोटO अिवलंब सं; थापन (cid:20)बधं क या (cid:20)बधं क को िलिखत म8 दी जाएगी
और जब तक वैस ेकमजोरी या Eु-ट का िनवारण नहq हो जाए, उस केbसग लाइन का उपयोग नहq (cid:4)कया जाएगा ।
(3) ि;लप एवं कट स(cid:4)ं 5या को सं;थ ापन (cid:20)बंधक या अ(cid:25) य स>म A यि" के पयOवे>ण म 8 िनT पा(cid:4)दत (cid:4)कया जाएगा,
जो उसक(cid:28) तारीख एवं अ(cid:25)य िववरण(cid:16) को -रकॉड Oकरेगा और उस पर तारीख के साथ ह; ता>र करेगा।
(4) केbसग लाइन के िनरी>ण, ि;लप एवं कट क(cid:28) कायO (cid:20)णाली के िलए तले उjोग सुर>ा िनदशे ालय मानक,
OISD-STD-187 या उसके संशोिधत सं; करण का अनसु रण (cid:4)कया जाएगा, िजसस े (cid:4)क केbसग लाइन के अ यिधक
िघसाव को रोका जा सके।
44447777.... ससससााााममममSSSSीीीी ससससभभंंभभंं ााााललललनननन ेे ेेककककेेेे ििििललललएएएए (cid:29)(cid:29)(cid:29)(cid:29)ररररRRRRगगगगगगगग उउउउपपपप++++कक कक रररर ....---- (1) सामaी को सभं ालन े के िलए -रbगग उप;क र क(cid:28), िजसके
अंतगOत 5ेन भी ह,ै उनका उपयोग (cid:4)कए जान े स े पूवO तथा उसके दौरान यह सुिनि(cid:147)त करन ेके िलए जाचँ पड़ताल क(cid:28)
जाएगी (cid:4)क वह सुरि>त ह।ै
(2) -रbगग उप;क र पर, उसके िसफा-रश (cid:4)कए गए सुरि>त कायकO रण भार से अिधक भार नहq लादा जाएगा।
(3) 5ेन(cid:16) को ओवरहडे िवjुत पारेषण लाइन के आसपास (cid:20)चािल त (cid:4)कए जान ेके दौरान, उस िवjुत पारेषण लाइन
के साथ आकि;मक सं;प श O स े बचाव के िलए पयाOR त सावधानी बरती जाएगी जब तक (cid:4)क 5ेन के गित म 8 होने के
दौरान उसे िनिT5 य न कर (cid:4)दया गया हो ।24 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) सभी -रbगग उप;क र और 5ेन क(cid:28) जाचँ (cid:4)कसी भी स>म A यि" (cid:31)ारा ऐसे अतं राल पर और ऐसी कायिO विध के
अनसु ार क(cid:28) जाएगी जसै ा (cid:20)बधं क या सं; थापन (cid:20)बंधक (cid:31)ारा िनधाO-रत (cid:4)कया गया हो और वह अपने िनरी>ण के
प-रणाम(cid:16) को -रकॉड O करेगा ।
44448888.... ससससााााममममSSSSीीीी ककककाााा ससससचचंंचचंं ययययनननन ....---- (1) एक दसू रे पर रख कर सिं चत सभी सामिaय(cid:16) को ढेर लगा कर, (cid:4)फसलन, िगरने या ढह
जान ेस ेरोकन ेके िलए िशकंजे म 8फंसा कर या अ(cid:25)य था जकड़ कर रखा जाएगा।
(2) रा;त (cid:16) को िनबाOध रखा जाएगा िजसस े (cid:4)क सामaी सभं ालने वाले उप; कर या A यि" अबाध और सरु ि>त
(cid:21)प से आ जा सके।
44449999.... पपपपााााईईईईपपपप ररररैैककैैकक???? ककककाााा ििििननननममममााााणण**णण** औऔऔऔरररर ललललददददााााईईईई ....---- (1) पाईप रैक(cid:16) का िनमाOण का िडजाइन इस (cid:20)कार (cid:4)कया जाएगा िजसस े
(cid:4)क वे उस पर लाद ेगए (cid:4)कसी भार को टेक द ेसके।
(2) पाईप, निलकाकार सामaी या अ(cid:25) य गोल सामaी को पाईप रैक(cid:16) स े लुढ़कने स े रोकने के िलए पयाOR त
Aय व;थ ा क(cid:28) जाएगी।
(3) लदाई, उतराई और अ(cid:25)त रण स(cid:4)ं 5याu के दौरान कोई A यि" पाईप रैक(cid:16) और (cid:4)कसी पाईप-भार के बीच तब
तक न जाएगा न उसे जान े (cid:4)दया जाएगा, जब तक (cid:4)क उस Aय ि" को कोई गितमान लद े %ए पाईप स े चोट लगन े से
बचाने के िलए (cid:20)भावी सरं >ा यिु " या (cid:20)णाली क(cid:28) Aय व; था न क(cid:28) गई हो।
55550000.... (cid:29)(cid:29)(cid:29)(cid:29)ररररगगगग ककककोोोो खखखखड़ड़ड़ड़ाााा ककककररररननननाााा औऔऔऔरररर (cid:29)(cid:29)(cid:29)(cid:29)ररररगगगग ककककोोोो खखखखोोोोललललननननाााा ....---- (1) जब तक काय O करन े के ;थ ान म 8 पयाOR त सामा(cid:25) य (cid:20)काश क(cid:28)
Aय व;थ ाए ँ नहq क(cid:28) जाती ह H तब तक भारी भार को उठाने और सं; थापन करने का काय O (cid:4)दन के (cid:20)काश म 8 ही (cid:4)कया
जाएगा।
(2) सभी खुल ेभाग और औजार मजबूती स ेबाँध ेजाएँगे।
(3) गाई लाइन,8 कैटलाइन,8 ;न ब लाइन8 और ऐसी अ(cid:25) य लाइन,8 जो आवJ यक ह(cid:16), (cid:4)कसी ओवरहडे िवjुत पारेषण
लाइन के छह मीटर के भीतर स;ं थािपत नहq क(cid:28) जाएगी।
(4) अ(cid:25)त दहO न इंजन के िनTक ासक के साथ जल शिमत या अ(cid:25)य (cid:20)भावी ; पुbलग रोधक क(cid:28) A यव; था क(cid:28) जाएगी।
(5) उ(cid:130)च दाब प-रसचं ारी तरल लाइन(cid:16) और वाTप लाइन(cid:16) को मजबूती स ेलंगर क(cid:28) भाँित ि;थर (cid:4)कया जाएगा।
(6) -रग को खड़ा करते समय और खोलते समय कूप शीषO को (cid:4)कसी चीज को (cid:4)फसलने या िगरने स े होनेवाली
>ित से संरि>त (cid:4)कया जाएगा।
(7) ऊपर स े घटक(cid:16) को िजसके अ(cid:25) तगतO नट, बो(cid:6) ट और ) लीट भी ह,H या तो एक बंडल म 8 या आधान(cid:16) म 8
सुर>ापूवकO नीचे उतारा जाएगा।
(8) (cid:20)बंधक या इस (cid:20)योजन से उसके (cid:31)ारा (cid:20)ािधकृत कोई उप (cid:20)बंधक या सं; थापन (cid:20)बंधक (cid:31)ारा -रग को खड़ा
करने तथा -रग को खोलन ेके िलए Aय वहार संिहता बनाया और लागू (cid:4)कया जाएगा और उस ेअjितत रखा जाएगा ।
55551111.... ममममडडडड टटटटंकंकंकंक---- औऔऔऔरररर ममममडडडड पपपप(cid:18)(cid:18)(cid:18)(cid:18) पप प प ....---- (1) कूप के (cid:20)भावी िनयंEण के िलए पयाIO >मता का मड टंक(cid:28) और मड पंप क(cid:28) A यव; था
क(cid:28) जाएगी और उसे अनरु ि>त (cid:4)कया जाएगा।
(2) मड टं(cid:4)कय(cid:16) को इस (cid:20)कार स े िडजाइन और सं; थािपत (cid:4)कया जाएगा िजसस े (cid:4)क मड पंप(cid:16) के िलए पािज-टव
चूषण क(cid:28) Aय व;थ ा हो सके।
(3) वेधन -रग से लगे %ए सभी मड पंप(cid:16) से सुर>ा दाब मोचन वॉ(cid:6) व और प\ित म 8 एक (cid:20)चालन गेज लगाया
जाएगा।
(4) दाब मोचन वॉ(cid:6)व क(cid:28) पंप, पाईप और (cid:4)फoटग(cid:16) के अिधकतम ;थ ािपत कायकO रण दाब के दस (cid:20)ितशत स े
अिधक दाब पर िवसजनO करने के िलए िनयत नहq (cid:4)कया जाएगा।
(5) सुर>ा दाब मोचन वॉ(cid:6)व स े होने वाल े िवसजOन को पाईप स े ऐसे ;थ ान पर ले जाया जाएगा जहाँ वह
Aय ि"य(cid:16) को संकटाप(cid:25)न नहq करेगा एव ंिवसजOन लाइन को सश) त (cid:21)प स ेि;थर (cid:4)कया जाएगा।
(6) (cid:4)कसी पंप और उसके सुर>ा दाब मोचन वॉ(cid:6) व के बीच कोई वॉ(cid:6) व नहq होगा।
55552222.... ककककूूूूपपपप ििििननननयययय(cid:11)(cid:11)ंं(cid:11)(cid:11)ंं णणणण उउउउपपपप++++कक कक रररर औऔऔऔरररर सससस;;;ंं;ंंVVVVययययााााएएएए ँँ ँँ....---- (1) वकOओवर एवं कूप उ (cid:20)ेरण स(cid:4)ं 5याu के िलए सुरि>त A यवहार
(cid:20)णािलयाँ और कूप वधे न (cid:20)(cid:4)5याu के िलए G लोआउट (cid:20)ीव8टर उप; कर (cid:20)णािलया,ँ तेल उjोग सरु >ा िनदशे ालय के¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 25
(cid:4)दशा-िनदशw , OSD-GDN-182, या तले उjोग सुर>ा िनदशे ालय के अनुशिं सत (cid:20)िै )टस, OISD-RP-174 या
उनके सशं ोिधत सं;क रण के अनसु ार ह(cid:16)गे।
(2) कूप िनयंEण उप;क र और स(cid:4)ं 5याu म,8 यह सुिनि(cid:147)त (cid:4)कया जाएगा (cid:4)क -
(क) कूप िनयंEण तरल पदाथ Oऔर उप; कर उपलGध और सं; थािपत ह Hऔर अपे>ानसु ार उपयोग (cid:4)कए जात ेह;H
(ख) तल-िछ(cid:26) के दाब को अितसतं िु लत करन ेके िलए कूप पयाOR त आपिे >क घन व गु(cid:21) व के कूप (cid:26)व स ेभरा ह;ै
(ग) -pbपग सं(cid:4)5या के दौरान, कूप म 8(cid:20)ित>ेप के (cid:4)कसी भी सकं ेत को पहचानने के िलए सू(cid:136) म (cid:21)प स े ‘ यान रखा
गया ह ैऔर वलय को भरा रखा गया ह;ै
(घ) प-रसंचरण और (cid:20)चालन कुंजी के िलए कन)े शन के साथ FOSV (फुल ओपbनग सyे टी वॉ(cid:6)व ) आसानी से
उपलGध ह Hऔर ड-े रक yलोर पर खलु ी ि;थित म8 रखे गए ह;H
(ड.) Gल ोआउट (cid:20)ीव8टर (बी.ओ.पी.) और सबं ंिधत उप; कर जैस े (cid:4)क चोक और (cid:4)कल मेनीफो(cid:6) ड, िनयंEण पैनल
और संचायक िनयिमत (cid:21)प स ेउपलGध, अनरु ि>त और परीि>त ह;H
(च) Gल ोआउट (cid:20)ीव8टर उप;क र, यह जानने के िलए (cid:4)क बी.ओ.पी. सही तरीके स े काय O कर रहा ह,ै सं; थापन के
समय और उिचत समय पर (cid:20)चालन(cid:16) के दौरान भी काय-O परीि>त और दाब परीि>त (cid:4)कया गया ह;ै
(छ) िविनमातO ा के Gल ोआउट (cid:20)ीव8टर ऑपरेoटग मनै ुअल के िनदशw (cid:16) का पालन (cid:4)कया जाता ह;ै
(ज) सभी कने)शन, वॉ(cid:6)व , (cid:4)फoटग, पाइbपग आ(cid:4)द Gल ोआउट (cid:20)ीवट8 र के िनधा-O रत काय O दाब के समान (cid:25)यूनतम
कायO दाब पर रखे गए ह;H
(झ) सही आकार के बो(cid:6)ट, नट और (cid:4)फoटग का उपयोग (cid:4)कया जाता ह ै और उ(cid:25) ह 8 अनुशिं सत बलाघणू O तक कसा
गया ह ैऔर सं(cid:4)5या के पुन: आरंभ करन ेके पूवO सभी कन)े सन दाब परीि>त ह;H
(ञ) सभी ह;त (cid:20)चािलत वॉ(cid:6)व ह; त च5(cid:16) स ेलैस ह Hऔर वे उपयोग के िलए सतत् तैयार रखे गए ह;H
(ट) िपट अ(cid:150)य ास का कायO िनयिमत (cid:21)प स े(cid:4)कया जाएगा।
55553333.... ककककूूूूपपपप ििििननननययययं(cid:11)ं(cid:11)ं(cid:11)ं(cid:11)णणणण उउउउपपपप++++कक कक रररर ककककाााा चचचचययययनननन....---- कूप िनयंEण उप; कर का चयन तेल उjोग सरु >ा िनदशे ालय (cid:31)ारा अनुशिं सत
(cid:20)ैि)टस, OISD-RP-174 या उसके संशोिधत सं;क रण के अनुसार (cid:4)कया जाएगा।
55554444.... आआआआववववििििधधधधकककक ििििननननररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)णणणण औऔऔऔरररर ककककूूूूपपपप ििििननननयययय(cid:11)(cid:11)ंं(cid:11)(cid:11)ंं णणणण उउउउपपपप++++कक कक ाााारररर ककककाााा ररररखखखख----ररररखखखखाााावववव....---- (1) कूप िनयंEण उप; कर के िलए िनरी>ण और
रख-रखाव कायO(cid:20)णाली को मलू उप; कर िविनमाOता क(cid:28) िसफा-रश(cid:16) को ‘यान म 8रखत े%ए तय (cid:4)कया जाएगा।
(2) (cid:20) यके कूप के िनरी>ण के पJ चात, कूप िनयंEण उप; कर को साफ (cid:4)कया जाएगा, उसका दिृ(cid:128)गत िनरी>ण
(cid:4)कया जाएगा, आगामी कूप पर सं;थ ापन स ेपूवO िनवारक रख-रखाव काय OिनT पा(cid:4)दत (cid:4)कया जाएगा।
(3) Aय ापक िनरी>ण सेवा के पाचँ वषO स े अनिधक के अ(cid:25) तराल पर मूल उप;क र िविनमातO ा क(cid:28) िसफा-रश(cid:16) के
अनसु ार िनTप ा(cid:4)दत (cid:4)कए जाएँगे।
(4) उपिविनयम (2) और उपिविनयम (3) के अधीन (cid:4)कए गए (cid:20) य ेक िनरी>ण का -रकॉड Oिनरी>ण करन े वाल े
स>म अिधकारी (cid:31)ारा रखा जाएगा।
(5) मूल उप;क र िविनमाOता के अनसु ार ; पेयर पाटOस क(cid:28) ज(cid:21)रत(cid:16) पर िवचार (cid:4)कया जाएगा।
(6) सभी Gल ोआउट (cid:20)ीव8टर, चोक मेनीफो(cid:6) ड तथा िनयEं ण इकाईय(cid:16) के पृथक रख-रखाव पूवOवृत या लॉग बकु
रखे जाएँगे।
(7) Gल ोआउट (cid:20)ीव8टर िनयंEण (cid:20)णाली के सभी (cid:20)ेशर गेज(cid:16) का अशं शोधन (cid:20) यके 6 मास म8 कम स ेकम एक बार
(cid:4)कया जाएगा।
55555555.... WWWWललललोोोोआआआआउउउउटटटट (cid:16)(cid:16)(cid:16)(cid:16)ीीीीवववव’’ेे’’ेेटट टट रररर ककककेेेे ििििललललएएएए ििििननननयययय(cid:11)(cid:11)ंं(cid:11)(cid:11)ंं णणणण (cid:16)(cid:16)(cid:16)(cid:16)णणणणााााललललीीीी....---- (1) सभी रैम िनरोधक(cid:16) म 8 अ(cid:25) तब(cid:159)धन यंE-िव(cid:25) यास ह(cid:16)ग े और
िनयंEण(cid:16) के (cid:20)चालन हते ु अनुदशे िनयंEण इकाई के समीप (cid:20)मखु ता स ेिचपकाए जाएँग।े
(2) शि" (cid:20)चािलत Gल ोआउट (cid:20)ीवट8 र के सभी िनयंEण, ड-े रक yलोर पर वेधक के िनकट अवि;थत ह(cid:16)ग।े26 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) Gल ोआउट (cid:20)ीव8टर के िलए दरू ; थ िनयंEण पनै ेल भी ड-े रक yलोर से सुरि>त अंतराल पर भ-ू तल पर
सं;थ ािपत (cid:4)कया जाएगा।
(4) Gलोआउट (cid:20)ीव8टर को एक संचायक (cid:20)णाली से जोड़ा जाएगा जो ढरे म 8 के सभी G लोआउट (cid:20)ीव(cid:25)े टसO को बंद
एवं हाइ[ोिलक संचािलत वॉ(cid:6)व को खोलन ेके िलए पयाOI माEा म 8(cid:26)व उपलGध करान ेम8 स>म होगा ।
(5) Gल ोआउट (cid:20)ीव8टर के िलए सभी िनयंEण, उपयु) त िच(cid:160)ननक(cid:16) से ; पT ट (cid:21)प स ेपहचाने जाएगँ े।
55556666.... WWWWललललोोोोआआआआउउउउटटटट (cid:16)(cid:16)(cid:16)(cid:16)ीीीीवववव’’ेे’’ेे टट टट रररर कककक---- अअअअससससबब33बब33 ललललीीीी ककककाााा पपपपररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)णणणण....---- Gल ोआउट (cid:20)ीवे(cid:25) टर अस8बली का परी>ण तले उjोग सुर>ा
िनदशे ालय के अनुशिं सत (cid:20)िै )टस, OISD-RP-174 के अन(cid:21)ु प (cid:4)कया जाएगा।
55557777.... WWWWललललोोोोआआआआउउउउटटटट ममममXXXXे े े े पपपपववूूववूू ाााावव**वव** धधधधााााििििननननययययाााा ँँ ँँ....---- (1) वेधन पकं प\ित के िलए िन(cid:18)न िलिखत िनयEं ण उप;क र, वेधन सं(cid:4)5याu के
दौरान सं;थ ािपत (cid:4)कए जाएगँ ,े अथाOत –
(क) वेधन पंक माEा म8 वृि\ या कमी रिज; टर करन े वाला गत ; तर सचू क और इसके अ(cid:25)त गOत वेधक
;ट Hड के िनकट दJृ य और NAय चेतावनी युि";
(ख) कूप को सब समय भरा रखने के िलए अपिे >त पकं क(cid:28) माEा को ठीक-ठीक मापन ेके िलए यिु ";
(ग) मु}य शले (cid:20)किपE के पास एक गैस ससं ूचक या िव; फोट मीटर जो वधे न ; टHड के िनकट NAय या
दJृ य सचेतक से जुड़ा होगा ;
(घ) जब b;pग को खqचा जा रहा हो तब कूप का पकं से सतत ् भरा जाना सिु नि(cid:147)त करने के िलए एक
युि"; और
(ड.) जब कूप (cid:20)ित>पे करता ह ैतब पंक पंप बंद करन ेके िलए वेधन-; टHड के िनकट एक िनयंEण युि"।
(2) य(cid:4)द उप-िविनयम (1) म 8 उि(cid:6)(cid:6) िख त िनयंEण उप; कर यह सूिचत करता ह ै (cid:4)क शलै समहू तरल कूप म8 (cid:20)वेश
कर रह ेह Hतो कूप को िनयंEण करने के िलए तुर(cid:25) त कारOवाई क(cid:28) जाएगी।
(3) (cid:20) य के ऐसी खान का, िजसम8 G लोआउट (cid:20)ीवे(cid:25) टर अस8बली स;ं थािपत (cid:4)कया जाता ह,ै (cid:20)बंधक, (cid:4)कसी ऐस े
सं;थ ापन के 30 (cid:4)दन के भीतर, (cid:4)कसी कूप के (cid:20)ित>ेप करने क(cid:28) दशा म 8 क(cid:28) जानेवाली कारOवाई और -रग पर
िनयोिजत (cid:20) य ेक Aय ि" तथा ऐसे अ(cid:25) य A यि"य(cid:16) के जो आवJ यक ह(cid:16), क त OAय िविनSदT ट करत े %ए ; थायी आदशे
तैयार करेगा।
(4) उप-िविनयम (3) म8 िविनSदT ट ; थायी आदशे (cid:16) क(cid:28) एक (cid:20)ित -रग के िनकट (cid:20)मुख ; थान(cid:16) पर िचपकाए
जाएँगे।
(5) (cid:4)कसी -रग पर िनयोिजत (cid:20) यके A यि" को (cid:4)कसी (cid:20)ित>ेप के चेतावनी सकं ेत, उप-िविनयम (3) म8 वzणत
;थ ायी आदशे (cid:16) और Gल ोआउट (cid:20)ीवे(cid:25)ट र अस8बली क(cid:28) पयाOR त समझ होगी और वह Gल ोआउट (cid:20)ीवे(cid:25) टर के िलए िनयंEण(cid:16)
को (cid:20)चािलत करन े म 8 समथ O होगा, और इस (cid:20)योजन के िलए G लोआउट (cid:20)ीवे(cid:25) टर ि[ल को सात (cid:4)दन म 8 एक बार
संचािलत (cid:4)कया जाएगा।
(6) उपयु" िनयंEण वॉ(cid:6)व कूप के िनकट उपलGध रहग8 े िजनका उपयोग आपात क(cid:28) दशा म 8 कूप को िनयंEण
करने के िलए (cid:4)कया जाएगा।
(7) जब b;pग को अंदर चलाया जाए या बाहर खqचा जाए, तब b;pग से अिनयंिEत (cid:20)वाह को रोकने के िलए
एक उपय)ु त यEं -िव(cid:25)य ास को ड-े रक yलोर पर सुगमता स ेउपलGध रखा जाएगा।
55558888.... WWWWलल लल ोोोोआआआआउउउउटटटट घघघघ(cid:29)(cid:29)(cid:29)(cid:29)टटटटतततत हहहहोोोो जजजजाााानननन ेे ेेककककेेेे पपपपYYYY चच च चाााातततत ्् ्् कककक---- पपपपूवूवूवूवााााववव**व** धधधधााााििििननननययययाााा ँँ ँँ ....---- इस सचू ना के सकं ेत का आभास होन े पर (cid:4)क (cid:4)कसी कूप म 8
Gल ोआउट हो रहा ह,ै उन Aय ि"य(cid:16) से िजनक(cid:28) उपि;थित G लोआउट िनयंEण करने के िलए आवJ यक समझी जाती ह ै
से िभ(cid:25)न सभी Aय ि"य(cid:16) को स;ं थ ापन स े तुर(cid:25) त हटा िलया जाएगा और आपात योजना म 8 (cid:4)दए गए काय-O (cid:20)णाली के
अनसु ार उपयु)त कारOवाई क(cid:28) जाएगी, अथाOत ्-
(2) सब समय के दौरान जब (cid:4)कसी Gल ोआउट िनयEं ण करने का कोई काम चल रहा हो, िन(cid:18) निलिखत
पूवाOवधािनया ँबरती जाएँगी -
(क) एक स>म rि" उस ;थ ान पर शु(cid:21) से अंत तक उपि;थत रहगे ा;¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 27
(ख) कूप स े हवा के बहाव क(cid:28) (cid:4)दशा म8 पाँच सौ मीटर के भीतर के >ेE को सकं ट >ेE के (cid:21)प म 8
िनधा-O रत (cid:4)कया जाएगा; और –
(i) सकं ट >ेE के भीतर के सभी िवjुत सं; थापन(cid:16) को अ(cid:4)5याशील कर (cid:4)दया जाएगा ता(cid:4)क cव लन
रोका जा सके;
(ii) सकं ट >ेE के भीतर केवल c वालारोधी या मलू भतू (cid:21)प से िनरापद लै(cid:18) प या टॉचO का उपयोग (cid:4)कया
जाएगा;
(iii) सकं ट के >ेE के भीतर कोई अनावृ त दीप या यानीय यातायात अन(cid:127)ु ात नहq (cid:4)कया जाएगा;
(ग) जहाँ तक rि"य(cid:16) क(cid:28) सरु >ा का संबंध ह,ै कोई स>म Aय ि" संवातन क(cid:28) ि;थित और c वालारोधी
या मलू भूत (cid:21)प से िनरापद उपकरण स ेगैस(cid:16) क(cid:28) उपि;थित का अिभिनJ चय करेगा;
(घ) उस ;थ ल पर या उसके िनकट आपात ि;थित म 8 उपयोग के िलए, भारतीय मानक G यरू ो के IS
10245 ख(cid:141) ड- II या IS 10245 ख(cid:141) ड- I या उनके सशं ोिधत सं;क रण के अनु(cid:21)प िनzमत ; वधा-रत J वसन उपकरण
अथवा वसै े बनावट वाल ेअ(cid:25)य उपकरण पयाOR त सं} या म 8उपलG ध रह8गे; और
(ड.) यथोिचत अि(cid:133) शामक उप; कर त क ाल उपयोग के िलए उपलGध रखा जाएगा।
55559999.... ववववधधेेधधेे नननन औऔऔऔरररर ववववकककक**** ओओओओववववरररर सससस;;ंं;;ंंVVVVययययााााएएएए ँँ ँँ....---- (1) (cid:20) यके पाली के (cid:20)ारंभ म,8 वेधक ; टHड के पास उपकरण(cid:16) और िनयंEण(cid:16),
[ॉ-ब)स (cid:16), मड पंप(cid:16), संवेदी और िनगरानी यंE(cid:16), मड लॉbगग, केbसग लाइन, कैट लाइन और G लोआउट (cid:20)ीवे(cid:25) टर
अस8बली क(cid:28) परी>ा पाली के भारसाधक A यि" या (cid:4)कसी अ(cid:25) य स>म A यि" (cid:31)ारा क(cid:28) जाएगी और वह ; वयं का
समाधान कर लेगा (cid:4)क वे अ(cid:130)छ े चालू हालत म 8ह।H
(2) (cid:20) य के खान का (cid:20)बंधक सिु नि(cid:147)त करेगा (cid:4)क सुर>ा और भ-ू तकनीक(cid:28) मामल(cid:16) स े संबंिधत स(cid:4)ं 5याu क(cid:28)
िव;त ृत योजना, अलग-अलग कूप(cid:16) के िलए वेधन सं(cid:4)5या पर या वकO ओवर स(cid:4)ं 5या वकOओवर योजना के आरंभ होन े
से पूव O तैयार कर ली गई ह ै और किथत सं(cid:4)5या के (cid:20)ारंभ होने से पूवO, सं; थापन (cid:20)बंधक, अ(cid:25)य संबंिधत पदधा-रय(cid:16)
और स>म rि"य(cid:16) को उपलGध करा (cid:4)दया गया ह।ै
(3) वेधन या वकO ओवर स(cid:4)ं 5या के आरंभ स े पूव,O वेधन या वकO ओवर और अ(cid:25) य संबिं धत गितिविधय(cid:16) के
सुरि>त (cid:20)चालन क(cid:28) जाँच और सुिनि(cid:147)त करन े के िलए (cid:20)ी-; पुbडग या (cid:20)ी-वकOओवर बैठक (cid:4)कया जाएगा और इसके
िनTक षx को -रकॉड O(cid:4)कया जाएगा और सद; य(cid:16) (cid:31)ारा ह; ता>-रत (cid:4)कया जाएगा।
(4) [ीलर सुिनि(cid:147)त करेगा (cid:4)क रोटरी टेबल को चलान े स े पूवO रोटरी टेबल या उसके समीप खतरे क(cid:28) दशा म 8
कोई भी Aय ि" मौजूद न हो।
(5) केbसग लाइन, ड-े रक के (cid:4)कसी भी अंग के संपकO म8 नहq होनी चािहए या 5ाउन Gलॉक और (cid:4)कसी pेवbलग
Gल ॉक चरखी, (cid:4)कसी लाइन ;प लू र, (cid:4)कसी लाइन ; टेबलाइज़र या भार सूचक को अव(cid:21)\ नहq करेगा।
(6) जब जुड़ाई हो रही हो तब (cid:4)कसी भी Aय ि" को, िसवाय उन Aय ि"य(cid:16) को जो व; तुत: सं(cid:4)5या म 8 लग े %ए ह,H
कूपशीष Oअथवा जुड़ाई लाइन या उप;क र के िनकट -रग yलेार पर अनु(cid:127)ात नहq करेगा।
(7) न(cid:138)न सिं धय(cid:16) स े जुड़ े सभी उ(cid:130)च दाब पाईप 8 जुड़ाई स(cid:4)ं 5याए ँ (cid:20)ारंभ करन े के पूव O यथोिचत (cid:21)प स े जकड़ े
जाएँगे और दाब परीि>त (cid:4)कए जाएँगे।
(8) जुड़ाई स(cid:4)ं 5या के पJच ात और िछ(cid:26)ण स े पूवO, केbसग को केbसग िव; फोटन दाब के (cid:25) यनू तम स त र (cid:20)ितशत
दाब पर वायु£\ ढंग से परीि>त (cid:4)कया जाएगा।
66660000.... ििििMMMMलललल ++++तत तत भभंंभभंं पपपपररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)णणणण ....---- (1) ि[ल ;त भं परी>ण (cid:20)ारंभ करन ेस ेपूव,O -
(क) Gलोआउट (cid:20)ीवे(cid:25)ट र अस8बली पर दाब परी>ण और काय Oपरी>ण (cid:4)कया जाएगा;
(ख) अि(cid:133)शमन उप;क र त काल उपयोग के िलए सुगमता स ेउपलGध रखा जाएगा;
(ग) परी>ण के िलए अपेि>त Aय ि"य(cid:16) स ेिभ(cid:25) न (cid:4)कसी भी A यि) ा को वेधन yलाे र पर (cid:20)वेश नहq करन े
(cid:4)दया जाएगा;28 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(घ) परी>ण लाइन को (cid:20) य ेक िसरे पर और (cid:20) यके नौ मीटर के अंतराल पर कस कर जकड़ा जाएगा;
(ड.) केली होज़ का उपयोग परी>ण लाइन के भाग के (cid:21)प म 8नहq (cid:4)कया जाएगा;
(च) परी>ण लाइन और वा(cid:6)व(cid:16) क(cid:28) परी>ा (cid:4)कसी स>म rि" (cid:31)ारा क(cid:28) जाएगी और (cid:4)कसी E-ु ट का
पता चलन ेक(cid:28) दशा म 8कोई भी परी>ण तब तक नहq (cid:4)कया जाएगा जब तक (cid:4)क ऐसी Eु-ट को सुधार नहq (cid:4)दया गया
ह।ै
(2) ि[ल स त् ंभ परी>ण औजार(cid:16) को (cid:20)ारंभ म 8खोलन ेका काम (cid:4)दन के समय ही (cid:4)कया जाएगा।
(3) जब (cid:4)कसी ि[ल ;त ंभ परी>ण के दौरान पेpोिलयम या (cid:20)ाकृितक गैस (cid:20)ाR त हो गई ह ैतब ि[ल पाईप को तब
तक नहq खqचा जाएगा जब तक (cid:4)क यह सिु नि(cid:147)त करन ेके िलए कारOवाई नहq कर ली जाती (cid:4)क ि[ल पाईप
म8 पेpोिलयम या (cid:20)ाकृितक गैस मौजूद होन ेक(cid:28) कोई सभं ावना नहq ह।ै
(4) (cid:4)कसी ि[ल ;त भं परी>ण के दौरान वायमु ंडल म8 उ पा(cid:4)दत गसै को c वालालाइन या c वालक (cid:31)ारा जला
(cid:4)दया जाएगा।
अअअअ(cid:15)(cid:15)(cid:15)(cid:15)ययययाााायययय –––– 6666
उउउउ2222पपपपााााददददनननन
66661111.... ििििछछछछCCCCणणणण ::::ाााारररराााा ककककूूूूपपपप कककक---- पपपप""ूू""ूूतततत ....---- कूप िछ(cid:26)ण तेल उjोग सुर>ा िनदशे ालय मानक, OISD-STD-191 या उसके
संशोिधत सं;क रण के अनसु ार िनTप ा(cid:4)दत (cid:4)कया जाएगा।
66662222.... ककककूूूूपपपप पपपपररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)णणणण औऔऔऔरररर सससस;;ंं;;ंंVVVVययययणणणण ....---- (1) कूप का परी>ण या स(cid:4)ं 5यण (cid:20)ारंभ करने स े पहल,े सहयु) त (cid:4)फoटग(cid:16) सिहत
(cid:4)5समस pी और (cid:20)वाह लाइन(cid:16) पर अिभकि(cid:6)पत दाब (cid:4)दया जाएगा और ऐस े परी>ण(cid:16) के प-रणाम(cid:16) को -रकॉड O (cid:4)कया
जाएगा।
(2) कूप परी>ण और स(cid:4)5यण का कायO सं; थापन (cid:20)बधं क अथवा ; वामी, अिभकता,O (cid:20)बंधक या उप (cid:20)बंधक (cid:31)ारा
इस (cid:20)योजन के िलए िलिखत म8 (cid:20)ािधकृत (cid:4)कसी स>म पदधारी के (cid:20)त य् > पयOवे>ण म 8 (cid:4)कया जाएगा और वह यह
सुिनि(cid:147)त करेगा (cid:4)क -
(क) (cid:20)वाह लाइन 8मजबूती से जमीन म8 ि;थर कर दी गई ह;H
(ख) िवभाजक सरु >ा वॉ(cid:6) व, अ(cid:130)छ ी काय Oचाल ूअव; था म 8तथा उिचत (cid:21)प से समायोिजत ह;ै
(ग) हाइ[ो-परीि>त िवभाजक का उपयोग (cid:4)कया गया ह;ै
(घ) पयाOI अि(cid:133)शमन उप;क र त काल उपयोग के िलए सुगमता स ेउपलGध ह;ै और
(ड.) टHक(cid:16) म 8कूप उ पाद(cid:16) को सुरि>त (cid:21)प स ेएकE करने के िलए पयाOI सिु वधाएँ (cid:20)दान क(cid:28) गई ह।H
(3) कूप परी>ण (cid:20)ारंभ करने से पवू O सं; थापन (cid:20)बंधक या उप-िविनयम (1) के अधीन िनSदTट स>म A यि" यह
सुिनि(cid:147)त करेगा (cid:4)क कूप िनयंEण कायO(cid:20)णाली को काय-O ; थल पर सभी संबिं धत A यि"य(cid:16) को उपलGध करा (cid:4)दया गया
ह ैऔर सभी संभाAय प-र;थ ितय(cid:16) को ‘य ान म8 रखत े%ए, सभी के (cid:31)ारा उस ेभली-भिँ त समझ िलया गया ह।ै
(4) कूप परी>ण और स(cid:4)ं 5यण काय Oको (cid:4)दवा-(cid:20)काश के घंट(cid:16) के बाद या िबजली कड़कन,े गजOन, तेज हवाu और
भारी बा-रश क(cid:28) ि;थितय(cid:16) म 8नहq (cid:4)कया जाएगा, िसवाय त ब जब (cid:20)बंधक (cid:31)ारा, काय Oसुर>ा िवJ लेषण के आधार पर
और उन िनयंEण संबंधी उपाय(cid:16) एवं अ(cid:25) य श तx के साथ जो वह िविनSदT ट करे ऐसा अनु(cid:127)ात (cid:4)कया गया हो।
(5) उप-िविनयम (4) म8 िनSदT ट (cid:20) यके अनु(cid:127)ा का एक -रकॉड O पयाOR त औिच यता के साथ अनुरि>त (cid:4)कया
जाएगा।
66663333.... उउउउ2222पपपपााााददददनननन ससससििुुििुुववववधधधधााााएएएए ँँ ँँ....---- (1) जब तेल >ेE म 8 (cid:4)कसी खान के अ(cid:25)द र (cid:4)कसी नए उ पाद सिु वधा का सिं नमाणO अथवा
िवjमान उ पादन सुिवधा, िजसम8 व-रत उ पादन (cid:20)णाली ()यूपीएस), (cid:20)ारंिभक उ पादन (cid:20)णाली (ईपीएस), तेल
संaहण के(cid:25)(cid:26) (ओसीएस), समहू संaहण के(cid:25) (cid:26) (जीजीएस), गैस संaहण के(cid:25) (cid:26) (जीसीएस), गैस स(cid:18) पीड़क संयEं
(जीसीपी), स8pल टंक(cid:28) फाम O (सीटीएफ), म‘यवतl टंक(cid:28) फामO (आईटीएफ), जल अंत:>ेपण संयंE (डG (cid:6) यआू ईपी),¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 29
पॉिलमर अतं :>ेपण संयंE (पीआईपी), त ;थ ान दहन संयंE (आईसीपी) या कोई अ(cid:25) य मह वपणू O सिु वधा शािमल ह,H
म8 मह व पणू O प-रवतनO करना आिशय त हो, तो ; वामी, अिभकताO और (cid:20)बंधक यह सिु नि(cid:147)त कर8गे (cid:4)क -
(क) इस सिु वधा से जुड़े (cid:4)कसी भी अ(cid:25)य उ पादन सुिवधा और सभी पाईप लाइन(cid:16) के नाम और
अव;थान, इस सिु वधा के साथ जुड़ े (cid:20) यके कूप का नाम, वैस ेभिू म का िव; तार, िजसके उपयोग का अिधकार या माग O
का अिधकार तय (cid:4)कया जा चकु ा हो और ऐस े सिु वधा के साठ मीटर के भीतर ि;थत (cid:4)कसी रेल, लोकमागO, लोक
िनमाOण, भवन या कोई अ(cid:25)य बिह;त लीय िविशTट ता को बिह; तल न) शे पर दशाOया गया ह ै और उसक(cid:28) एक (cid:20)ित
सुिवधा के(cid:25)(cid:26) म 8रखी गई ह;ै
(ख) सभी ससु ंगत काननू ी अप>े ाu, सरु >ा मानक(cid:16) और सरु >ा (cid:4)दशा-िनदशw (cid:16) के अनुपालन हेत ु
द;तावेज(cid:16) को काय-O ;थ ल पर भी उपलGध रखा गया ह;ै
(ग) उ पादन सिु वधा जहाँ पेpोिलयम गसै या (cid:26)व के 5मश: तीन सौ टन और एक लाख टन से अिधक
क(cid:28) माEा को संaहीत या संचिलत (cid:4)कया जाता ह,ै वहा ँ मु} य िनरी>क (cid:31)ारा इस (cid:20)योजन हते ु िविनSदT ट (cid:20)(cid:21)प और
(cid:20)णाली म 8सुर>ा (cid:20)ितवेदन को कायO;थ ल पर उपलG ध रखा गया ह;ै
(घ) सुिवधा के(cid:25)(cid:26) का िव; तृत पाइbपग एवं यंEीकरण आरेख अनरु ि>त और अjितत रखा गया ह ै और
उसक(cid:28) एक (cid:20)ित सुिवधा के(cid:25)(cid:26) म 8उपलG ध रखी गई ह।ै
(2) उ पादन सिु वधाए ँ सदु ढ़ृ बनावट और अपिे >त शि" के ह(cid:16)गे और वे मु} य िनरी>क (cid:31)ारा इस (cid:20)योजन के
िलए सामा(cid:25)य या िवशषे आदशे के अधीन िविनSदT ट मानक के अनसु ार अिभकि(cid:6)पत, िनzमत, (cid:20)चािलत और
अनुरि>त ह(cid:16)गे।
66664444.... भभभभडडंंडडंं ााााररररणणणण टटटटंकंकंकंक---- ....---- पेpोिलयम के थोक भंडारण के िलए (cid:20) यके टंक(cid:28), तले उjोग सरु >ा िनदशे ालय के मानक OISD-
STD-118 या उसके संशोिधत सं;क रण के अन(cid:21)ु प अिभकि(cid:6)पत, िविनzमत, (cid:20)चािलत और अनुरि>त होगा।
66665555.... बबबबााााधधँँधधँँ ???? ककककाााा घघघघररेेररेे ाााा ....---- (1) पेpोिलयम भंडारण टंक(cid:28) बाँध(cid:16) के घेरे म8 अवि;थत ह(cid:16)गे िजसके सभी ओर बने घरे ानमु ा
सड़क ह(cid:16)गे और सभी बाँध(cid:16) के घेरे म8 तले या पानी का संचयन नहq होने दने े के िलए, उपयु) त िनकास (cid:20)णाली क(cid:28)
Aय व;थ ा होगी।
(2) पेpोिलयम भंडारण टं(cid:4)कय(cid:16) के िलए बाँध(cid:16) के घरे े का िव(cid:25)य ास तथा अिभक(cid:6) पन तले उjोग सुर>ा िनदशे ालय
के मानक, OISD-STD-118 के अनुसार (cid:4)कया जाएगा।
66666666.... भभभभडडंंडडंं ााााररररणणणण टटटटंकंकंकंक---- औऔऔऔरररर बबबबााााधधँँधधँँ ???? ककककेेेे घघघघररेेररेे ???? ककककेेेे ििििललललएएएए ससससााााममममाााा’’’’यय यय अअअअपपपप(cid:22)(cid:22)ेे(cid:22)(cid:22)ेे ााााएएएए ँँ ँँ....---- (1) पेpोिलयम के भंडारण के िलए उपयोग (cid:4)कए जा रह े
टं(cid:4)कय(cid:16) के िलए अिभक(cid:6)प न प\ित तल उjोग सरु >ा िनदशे ालय के अनुसिं शत (cid:20)िै )टस, OISD-STD-108 या उसके
संशोिधत सं;क रण के अनसु ार ह(cid:16)गी।
(2) भंडारण टंक(cid:28) क(cid:28) ऊंचाई इसके A यास का डढ़े गुणा या बारह मीटर, इनम8 से जो भी कम हो, से अिधक नहq
होगी।
(3) (cid:4)कसी बाँध के घेरे म 8अवि;थत कोई टंक(cid:28) स े िनकलन े वाली या को जाने वाली पाईbपग (cid:4)कसी अ(cid:25) य बाँध(cid:16) के
घेरे से होकर नहq गुजरेगी और टं(cid:4)कय(cid:16) से जुड़ े पाईbपग यथासभं व, सीधे बाँध से बाहर क(cid:28) ओर िनकाले जाएँगे ता(cid:4)क
घेरे के भीतर के पाईbपग को (cid:25)य नू तम (cid:4)कया जा सके।
(4) (cid:4)कसी टंक(cid:28) के खोल और बाँध(cid:16) क(cid:28) दीवार के भीतरी िनचल े छोर के बीच क(cid:28) (cid:25)यूनतम दरू ी टंक(cid:28) क(cid:28) आधी
ऊंचाई से कम नहq होगी।
(5) (cid:20) य के बाँध >ेE के चार(cid:16) ओर (cid:20)वेश मागO ह(cid:16)गे और सड़क8 आपस म 8 जुड़ े रहग8 े ता(cid:4)क आग क(cid:28) ि;थित के
दौरान (cid:4)कसी मागO के बािधत होने के (cid:20)भाव को कम से कम (cid:4)कया जा सके।
(6) (cid:20) य के टंक(cid:28) म 8एक -र)त ;थ ान, जो टंक(cid:28) क(cid:28) कुल >मता के पाचँ (cid:20)ितशत से कम नहq हो, रखा जाएगा।
(7) (cid:20) य के टंक(cid:28) का सं;थािपत या पुनस(cid:159); थािपत (cid:4)कए जान े पर तथा उसका उपयोग आरंभ करन े से पूव,O (cid:4)कसी
स>म rि" (cid:31)ारा तले उjोग सुर>ा िनदशे ालय मानक, OISD-STD-129 या उसके संशोिधत सं; करण के अनुसार,
हाइ[ो-परी>ण (cid:4)कया जाएगा ता(cid:4)क यह सिु नि(cid:147)त (cid:4)कया जा सके (cid:4)क यह -रसाव स े मु) त ह ै तथा पेpोिलयम के
भंडारण के िलए उपयु)त ह।ै30 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(8) ऐसे परी>ण क(cid:28) एक -रपोटO तैयार कर रखी जाएगी।
(9) (cid:20) य के भंडारण टंक(cid:28) का, इसक(cid:28) छत तथा सभी धाि वक जोड़(cid:16) सिहत अतं राOTp ीय इले) pोकेिमकल आयोग
मानक, आईईसी 62305-3 या उसके संशोिधत सं; करण, म 8 उि(cid:6)ल िखत मानक एवं तरीके के अनसु ार अ य (cid:6) प भ-ू
(cid:20)ितरोध के साथ वैjुत संयोजन (cid:4)कया जाएगा।
(10) भूयोजन (अ⁄थग) क(cid:28) (cid:20)भावशीलता का बारह मास म 8एक बार परी>ण (cid:4)कया जाएगा और ऐस े (cid:20) य ेक परी>ण
के प-रणाम(cid:16) को अनरु ि>त (cid:4)कया जाएगा।
(11) कोई भी rि" सफाई या रख-रखाव के काय O के िलए (cid:4)कसी टंक(cid:28) म 8 (cid:20)वेश नहq करेगा, न उसे (cid:20)वेश करन े
(cid:4)दया जाएगा, जब तक उसके (cid:31)ारा सीिमत ;थान म 8 (cid:20)वेश करन े के िलए कायाOनमु ित (cid:20)ाI न (cid:4)कया हो या जारी न
(cid:4)कया गया हो और वह टंक(cid:28) (cid:4)कसी स>म rि" (cid:31)ारा जाँची न गई हो और गसै म"ु न पाई गई हो ।
(12) टंक(cid:28) क(cid:28) छत पर सरु ाख(cid:16) और अि(cid:133)रोधक(cid:16) के िनरी>ण, जाँच क(cid:28) सुगमता के िलए कटघरे के साथ ¥मण मागO
क(cid:28) Aय व;थ ा होगी, ता(cid:4)क छत पर कzमय(cid:16) के आवागमन सुरि>त ह(cid:16) ।
(13) (cid:20) य के टंक(cid:28) को रंगा जाएगा और (cid:20)चालन सबं ंधी E-ु टय(cid:16) स े बचने के िलए इसके नंबर, भराई क(cid:28) सरु ि>त
ऊंचाई और सदं भ Oऊंचाई को टंक(cid:28) पर िचि(cid:25)हत (cid:4)कया जाएगा ।
(14) टंक(cid:28) का कोई माप या नमनू ा सaं हण संबंधी काय OगजOन या ओला-वृि(cid:128) के दौरान नहq (cid:4)कया जाएगा।
66667777.... ततततललेेललेे (cid:16)(cid:16)(cid:16)(cid:16)षषेेषषेे णणणण पपपपपपंंपपंं (cid:22)(cid:22)(cid:22)(cid:22)(cid:11)(cid:11)ेे(cid:11)(cid:11)ेे मममम 33 33ससससुरुरुरुर(cid:22)(cid:22)(cid:22)(cid:22)ाााा ससससबबंंबबंं धधंंधधंं ीीीी पपपपववूूववूू ाााावव**वव** धधधधााााििििननननययययाााा....ँँँँ---- (1) पंप के सभी गितमान भाग बाड़ (cid:31)ारा पयाOI (cid:21)प स े
सुरि>त (cid:4)कया जाएगा।
(2) सुर>ा िवमोचन वॉ(cid:6)व के िवमुि" िनगOम (cid:31)ार को पपं के चूषक िसरे के साथ जोड़ा जाएगा।
(3) ƒजन का िनगमO ;फ ुbलग िनरोधक के साथ सि§त रहगे ा।
66668888.... ममममननेेननेे ीीीीफफफफोोोोHHHHडड डड (cid:22)(cid:22)(cid:22)(cid:22)(cid:11)(cid:11)ेे(cid:11)(cid:11)ेे ....---- (cid:20) य ेक खान का (cid:20)बंधक यह सिु नि(cid:147)त करेगा (cid:4)क मने ीफो(cid:6) ड क(cid:28) (cid:20) येक इनलेट लाइन पर उपयु"
र8ज का दाब गेज और गरै वापसी वॉ(cid:6) व जोड़ा गया ह।ै
66669999.... (cid:16)(cid:16)(cid:16)(cid:16);;;;VVVVययययाााा (cid:22)(cid:22)(cid:22)(cid:22)(cid:11)(cid:11)ेे(cid:11)(cid:11)ेे ....---- (1) (cid:20)(cid:4)5या >ेE म,8 (cid:20) य ेक खान का (cid:20)बंधक यह सिु नि(cid:147)त करेगा (cid:4)क-
(क) दाब पाE के सुर>ा िवमोचन वॉ(cid:6) व या दाब सरु >ा वॉ(cid:6)व क(cid:28) िनकासी लाइन एक उभयिनT ठ हडे र के
मा‘यम से yलेयर के साथ जुड़ी ह(cid:16);
(ख) सभी बाथ हीटर, अ(cid:20) य> हीटर और yलेयर लाइन म 8-रमोट इि(cid:133)शन िस;टम लगे ह(cid:16);
(ग) प-रचािलत बाथ हीटर म8 जल ; तर हमेशा अि(cid:133) kूब के ;तर से ऊपर हो;
(घ) बनOर के वायु अंतवाOही लाइन म 8c वाला िनरोधक अपने ; थान पर ह;H
(ड.) पेpोिलयम के संचलन के िलए (cid:20)यु) त सभी पाE, उप; कर, बाथ हीटर(cid:16) या अ(cid:20) य> हीटर(cid:16) (cid:20)भावी ढंग स े
भूयोिज त (cid:4)कए गए ह;H
(च) वैjुत िनयंEण पैनल के िनकट भारतीय मानक G यूरो के आईएस 15652 या उसके संशोिधत सं;क रण के
अनसु ार कुचालक मैट (cid:4)दया जाएगा;
(छ) पाE और सुर>ा िवमोचन वा(cid:6) व या दाब सुर>ा वा(cid:6) व के परी>ण के -रकाड O पाE पर, िजसम 8 सुर>ा
िवमोचन वा(cid:6)व और दाब सुर>ा वा(cid:6)व शािमल ह,H उ क(cid:28)णO (cid:4)कए गए ह।H
(2) नए (cid:20)cव िलत हीटर(cid:16) क(cid:28) दशा म8 गसै (cid:31)ारा (cid:20)c विलत हीटर (हीटर संसाधक, बाथ हीटर और अ(cid:20) य> हीटर)
म,8 दाहक (cid:20)बंधन (cid:20)णाली का (cid:20)ावधान होगा जो पायलॉट yलमे आउट क(cid:28) दशा म 8 मु} य और पायलॉट दाहक के गैस
क(cid:28) आपzू त को रोक दगे ा और पायलॉट yलमे आउट पर Nr अलाम O क(cid:28) आवJ यक rव;था भी उपलGध करायी
जाएगी।
(3) िवjमान (cid:20)cज विलत हीटर(cid:16) के िलए, हाइ[ोकाबOन गैस क(cid:28) िनयिमत (cid:21)प से िनगरानी क(cid:28) जाएगी और
इसका -रकॉड Oइस (cid:20)योजन के िलए (cid:20)ािधकृत (cid:4)कसी स>म Aय ि" (cid:31)ारा रखा जाएगा।
77770000.... जजजजननेेननेे ररररेेेेटटटटरररर (cid:22)(cid:22)(cid:22)(cid:22)(cid:11)(cid:11)ेे(cid:11)(cid:11)ेे ....---- (1) (cid:20) य के खान का (cid:20)बंधक यह सिु नि(cid:147)त करेगा (cid:4)क िन(cid:144)िलिखत >ेE(cid:16) म8 कुचालक मैट क(cid:28) A यव; था
क(cid:28) गई ह,H अथातO -¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 31
(क) वैjुत िनयंEण क>;
(ख) जेनरेटर सेट और उसके िनयंEण पैनल;
(ग) pांसफामOर और इसके पैनल; और
(घ) मोटर(cid:16) के समीप के िनयंEण पनै ल।
(2) इंजन के िनगमO क(cid:28) ऊंचाई के(cid:25) (cid:26)ीय सरकार (cid:31)ारा पयाOवरण, वन और जलवायु प-रवतOन मंEालय म8 समय-
समय पर जारी (cid:4)कए गए (cid:4)दशा-िनदशw (cid:16) के अनुसार होगी।
77771111.... गगगगससैैससैै ससससपपपंंपंं ीीीीडडडडकककक शशशशडडेेडडेे ययययाााा गगगगहहृृहहृृ ....---- (1) गैस सपं ीडक शेड या गृह को तले उjोग सरु >ा िनदशे ालय के मानक, OISD-
STD-118 या उसके सशं ोिधत सं;क रण के अनुसार हीटर स े सुरि>त दरू ी पर अवि;थत (cid:4)कया जाएगा तथा उसम 8
छत होगी और वह सभी ओर स ेखुला होगा ता(cid:4)क फश Oपर भारी वाT प(cid:16) या गसै (cid:16) के जमाव से बचा जा सके।
(2) रख-रखाव और (cid:20)चालन म 8 आसानी और सिु वधा के िलए संपीडक शेड या गृह बैटरी सीमाu के िनकट
अवि;थत होगा।
(3) संपीडक शेड या गृह म 8संपीड़क िन(cid:144)िलिखत के साथ सि§त ह(cid:16)गे-
(क) दाब के पूवO अवधा-रत िब(cid:25) द ु से ऊपर बढ़ने स े रोकने के िलए इनलेट और सभी ; तर(cid:16) पर दाब
िवमोचन वॉ(cid:6)व ;
(ख) (cid:4)कसी फॉ(cid:6)ट क(cid:28) दशा म8 सपं ीडक को बंद करने के िलए जलशीतलन वापसी लाइन के साथ लगा
%आ उ¤ उ(cid:25)म ोचन तापमान शटडाउन तथा उ(cid:130)च जलशीतलन तापमान ; वीच;
(ग) उ¤, इनलेट, अंतर ; तरीय और उ(cid:25)म ोचन दाब शट डाउन;
(घ) अ(cid:6)प (cid:6)य ूब तेल दाब शट डाउन;
(ड.) (cid:4)कसी फॉ(cid:6)ट क(cid:28) दशा म8 सपं ीडक को बंद करने के िलए जलशीतलन वापसी लाइन के साथ लगा
%आ िन(cid:18)न शीतलन जल (cid:20)वाह ि;वच;
(च) आपात शटडाउन के िलए, जहाँ भी लागू हो, एक -रमोट आइसोलशे न ि;वच िजसका िनयEं ण
पैनल ह;त चािलत री-सेट के साथ हो।
(4) उप-िविनयम (2) के अधीन क(cid:28) सुर>ा युि"या ँ (cid:20)चालक को सकं ेत दने े के िलए ;वचािलत (cid:21)प से (cid:20)चािलत
'टर या ऑिडयो अलाम Oके साथ अंतर-युि(cid:138)मत भी (cid:4)कया %आ होगा।
(5) गैस संपीडक शेड या गृह म8 पयाIO सं}या म,8 ऑिडयो अलामO (cid:20)णाली के साथ अतं र-युि(cid:138)मत हाइ[ोकाबOन गैस
संसूचक सं;थ ािपत ह(cid:16)गे, जो (cid:25)य नू तम िव; फोट सीमा के बीस (cid:20)ितशत पर -pगर करे।
77772222.... उउउउ2222पप पप ााााददददनननन ससससििुुििुुववववधधधधाााा औऔऔऔरररर सससस++ंं++ंं थथ थथ ाााापपपपनननन???? ककककेेेे ििििललललएएएए ससससााााममममाााा’’’’यय यय ससससररुुररुु (cid:22)(cid:22)(cid:22)(cid:22)ाााा....---- (cid:20) येक खान का (cid:20)बंधक यह सिु नि(cid:147)त करेगा (cid:4)क –
(क) सभी उ पादन सिु वधा या सं; थापन(cid:16) म 8वायु (cid:4)द(cid:138) दशकO लगाया गया ह;ै
(ख) रसायन इ;त ेमाल होन ेवाले शडे म 8आँख(cid:16) को धोन ेक(cid:28) सुिवधा (cid:20)दान क(cid:28) गई ह ैऔर सामaी सुर>ा डाटाशीट
(cid:20)दzशत (cid:4)कए गए ह;H
(ग) (cid:20) य के उ प ादन सुिवधाu या सं;थ ापन(cid:16) म 8एक आपात वाहन उपलGध कराया गया ह;ै
(घ) सभी पाईप लाइन को भारतीय मानक G यूरो के IS 2379 या उसके संशोिधत सं; करण म8 इंिगत रंग-सकं ेत
के अनसु ार रंगे गए ह Hऔर उ)त रंग-सकं ेत सं;थापन म 8(cid:20)दzशत (cid:4)कए गए ह;H
(ड.) िनषधे ा मक संदशे (cid:16) के िलए साम-रक ;थान(cid:16) म8 (cid:20)दशOन प(cid:143) लगा (cid:4)दए गए ह;H
(च) नये उ पादन सिु वधाu के िनमाOण या (cid:20)मुख प-रवतOन(cid:16) स े सबं ंिधत सभी ससु ंगत द;तावेज(cid:16) को अनुरि>त
(cid:4)कया गया ह ैतथा सिु वधा के(cid:25)(cid:26) म8 उपलG ध रखा गया ह।ै
77773333.... अअअअ(cid:18)(cid:18)(cid:18)(cid:18)लल लल ीीीीककककररररणणणण सससस;;ंं;;ंंVVVVययययााााFFFF ककककेेेे ददददौौौौरररराााानननन पपपपववूूववूू ााााधध**धध** ााााििििननननययययाााा..ँँ..ँँ---- (1) (cid:4)कसी कूप म8 अ(cid:18)ल ीकरण स(cid:4)ं 5याए,ँ इस (cid:20)योजन के िलए
(cid:20)ािधकृत पदधारी के सीध ेवैयि"क पयOवे>ण के अधीन चलाई जाएँगी।
(2) अ(cid:18)ल ीकरण स(cid:4)ं 5याu के पूवO सभी दाब लाइन(cid:16) और सहयु) त उप; कर का परी>ण, अनमु ािनत कायOकरण
दाब से दस (cid:20)ितशत अिधक दाब पर (cid:4)कया जाएगा।32 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) एक अ(cid:20) य ावतOन वॉ(cid:6)व , कूपशीषO के िजतना सभं व हो उतना िनकट अिभ(cid:4)5या लाइन म8 सं;थ ािपत (cid:4)कया
जाएगा।
(4) पदधारी यह ‘य ान रखेगा (cid:4)क -
(क) अ(cid:18)ल न सं(cid:4)5या के िलए अपिे >त A यि"य(cid:16) से िभ(cid:25) न कोई भी A यि" कूप के आसपास नहq ह;ै
(ख) सामaी सरु >ा डाटा शीट को स(cid:4)ं 5या ;थल पर (cid:20)दzशत (cid:4)कया जाएगा तथा सामाaी सरु >ा डाटाशीट
और वैयि"क सुर>ा उप;क र और अ(cid:25)य संर>ा सिु वधाu क(cid:28) अपे>ाए ँ पदधारी या स>म A यि" (cid:31)ारा
सुिनि(cid:147)त (cid:4)कया जाएगा।
77774444.... ििििववववभभभभजजंंजजंं नननन सससस;;ंं;;ंंVVVVययययााााFFFF ककककेेेे ददददौौौौरररराााानननन पपपपववूूववूू ाााावव**वव** धधधधााााििििननननययययाााा..ँँ..ँँ---- (1) (cid:4)कसी कूप म 8 िवभंजन स(cid:4)ं 5याए,ँ इस (cid:20)योजन के िलए
(cid:20)ािधकृत पदधारी के सीध ेवैयि"क पयOवे>ण के अधीन चलाई जाएँगी।
(2) िवभंजन स(cid:4)ं 5याu के पूव,O कूपशीष O पर अिं तम वॉ(cid:6) व तक िवसजOन पाईपलाइन का परी>ण अनुमािनत
िवभंजन दाब स ेदस (cid:20)ितशत अिधक दाब पर (cid:4)कया जाएगा।
(3) एक अ(cid:20) य ावतOन वॉ(cid:6)व , कूपशीषO के िजतना सभं व हो उतना िनकट (cid:20) येक िवसजOन लाइन म 8 सं; थािपत (cid:4)कया
जाएगा।
(4) सभी िवसजOन या ;E ावन लाइन8 कस कर जकड़ी जाएगँ ी और ; Eावन लाइन 8 खलु ी टं(cid:4)कय(cid:16) या (cid:4)कसी गत O म 8
िवसजनO कर8गी।
(5) िवभंजन स(cid:4)ं 5याu के दौरान, पदधारी यह ‘ यान रखेगा (cid:4)क कूप के आस-पास -
(क) िवभंजन स(cid:4)ं 5याu के िलए अपिे >त A यि"य(cid:16) स ेिभ(cid:25)न कोई भी A यि" न रह;े
(ख) (cid:4)कसी अनावृत दीप या c वलन के अ(cid:25) य eोत(cid:16) क(cid:28) अनु(cid:127)ा नहq दी गई ह;ै
(ग) सभी िवjुत उप;क र को अ(cid:4)5याशील कर (cid:4)दया गया ह;ै और
(घ) यथोिचत अि(cid:133)शामक उप;क र तरु ंत उपयोग (cid:4)क िलए उपलG ध (cid:4)कए गए ह।H
(6) पंbपग यिू नट8 कूप शीषO से सरु ि>त दरू ी पर 5ास पवन पर अवि;थत ह(cid:16)गी।
(7) सभी उ¤ दाब पाइप ि;थर और सरु ि>त कर (cid:4)दए जाएँगे।
77775555.... पपपप\\ेे\\ेे ोोोोििििललललययययमममम टटटट]]कक]]ककरररर???? कककक---- ललललददददााााईईईई औऔऔऔरररर उउउउततततररररााााईईईई ककककेेेे ददददौौौौरररराााानननन पपपपववूूववूू ाााावव**वव** धधधधााााििििननननययययाााा..ँँ..ँँ---- (1) (cid:20) य के टंक(cid:28) को इसक(cid:28) द(cid:21)ु ; ती एव ं सुरि>त
दशा के िलए जाँचा जाएगा, और टHकर क(cid:28) लदाई और उतराई को इस (cid:20)योजन के िलए (cid:20)ािधकृत स>म A यि" (cid:31)ारा
पयOवेि>त (cid:4)कया जाएगा।
(2) पेpोिलयम वािहत टHकर(cid:16) क(cid:28) लदाई और उतराई (cid:4)दवा-(cid:20)काश के घंट(cid:16) के बाद या िबजली कड़कन,े गजOन, आंधी
और भारी बा-रश जसै ी प-रि;थितय(cid:16) के दौरान नहq (cid:4)कया जाएगा, िसवाय तब जब (cid:20)बधं क (cid:31)ारा, काय O सुर>ा
िवJल ेशण के आधार पर तथा उसके (cid:31)ारा िविनSदT ट िनयंEण उपाय(cid:16) एवं अ(cid:25) य श तx के अधीन, ऐसा अनु(cid:127)ात (cid:4)कया
गया ह।ै
(3) उप-िविनयम (2) म8 िनSदTट (cid:20) य ेक अनमु ित का -रकॉड OपयाOR त औिच य ता के साथ अनुरि>त (cid:4)कया जाएगा।
(4) लदाई और उतराई >ेE म 8 सभी पाईप लाइन(cid:16), भरण एवं िवतरण होज(cid:16) या धात ु पाईप(cid:16), धाि वक लदाई
बा%u, घूणlमान सिं धय(cid:16), टं(cid:4)कय(cid:16), टHकर(cid:16) क(cid:28) चिे सस को वैjुत अिवि(cid:130)छन और द>तापूवOक भ-ू योिजत रखा जाएगा।
(5) (cid:4)कसी भी टHकर को तब तक नहq लादा या उतारा जाएगा जब तक (cid:4)क उसका इंजन बंद न कर (cid:4)दया गया हो
और बैटरी को िबजली प-रपथ से अलग न कर (cid:4)दया गया हो और तब तक इंजन को पुनः चाल ू नहq (cid:4)कया जाएगा
और बैटरी को िबजली प-रपथ से जोड़ा नहq जाएगा जब तक (cid:4)क सभी टं(cid:4)कय(cid:16) और वॉ(cid:6) व(cid:16) को स-ु र>त (cid:21)प स ेबदं न
कर (cid:4)दया जाए।
(6) कोई भी ध«ू पान या खलु ी लौ लदाई िब(cid:25) द ु स े तीस मीटर के भीतर और लदाई टzमनल के संरि>त >ेE के
भीतर अनमु त नहq (cid:4)कया जाएगा।
(7) िन(cid:18)न प-रवेशीय तापमान के कारण जमीनी ; तर के िनकट cवलनशील वाTप के संचयन को रोकने के िलए
लदाई और उतराई >ेE(cid:16) म 8संवातन के िलए पयाOI rव;था क(cid:28) जाएगी।
(8) यथोिचत अि(cid:133)शामक उप;क र टHकर(cid:16) के लदाई और उतराई के दौरान तुर(cid:25) त उपयोग के िलए पयाOI सुगमता स े
उपलGध रहगे ा।
(9) छलकाव क(cid:28) रोकथाम के िलए (cid:20)ावधान (cid:4)कया जाएगा।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 33
77776666.... ककककूूूूपपपप???? सससस ेे ेेउउउउ2222पपपपाााा;;;;ददददतततत जजजजलललल ककककेेेे ििििललललएएएए अअअअििििभभभभ;;;;VVVVययययाााा (cid:16)(cid:16)(cid:16)(cid:16)णणणणााााललललीीीी ((((बबबबििििहहहह::::____ाााावववव अअअअििििभभभभ;;;;VVVVययययाााा ससससययंंययंं ं(cid:11)ं(cid:11)ं(cid:11)ं(cid:11))))) ....----
(1) कूप(cid:16) से उ पा(cid:4)दत जल क(cid:28) अिभ(cid:4)5या (cid:20)णाली को इस (cid:20)कार तैयार (cid:4)कया जाएगा (cid:4)क (cid:20) यके उ(cid:25) मोचन (cid:20)वाह
म8 का तेल घटक के(cid:25)(cid:26) ीय सरकार (cid:31)ारा पयाOवरण, वन और जलवायु प-रवतनO मंEालय म8 िनधाO-रत (cid:4)कए गए शतx को
पूरा करे।
(2) कूप(cid:16) स े उ पा(cid:4)दत जल के िलए उ(cid:25) मोचन bबद ु को इस (cid:20)कार स े अवि;थत (cid:4)कया जाएगा (cid:4)क ऐसा उ(cid:25)म ोचन
पयाOवरण के िलए कोई भी >ित का कारण न बने ।
77777777.... ककककूूूूपपपप सससस""""ववववRRRRससससगगगग सससस;;ंं;;ंंVVVVययययााााएएएए..ँँ..ँँ---- (1) (cid:20) यके खान का (cid:20)बंधक ऐस े (cid:20) य ेक कूप(cid:16) के िलए िजनका सzवbसग (cid:4)कया जाना
ह,ै एक कूप सzवbसग योजना या वकO ओवर योजना को तैयार एवं (cid:4)5या(cid:25) वयन करेगा, िजसम 8 स(cid:4)ं 5याu के दौरान
(cid:4)कए जान े वाल े सभी कायकO लाप(cid:16) का G यौरा (cid:4)दया गया हो और इस योजना क(cid:28) एक (cid:20)ित को कूप ; थल पर रखा
जाएगा।
(2) कूप सzवbसग स(cid:4)ं 5या को (cid:20)ारंभ करन ेस ेपूवO, सुरि>त स(cid:4)ं 5याu एवं अ(cid:25)य संबिं धत कायकO लाप(cid:16) को जाँचन ेऔर
सुिनि(cid:147)त करन ेके िलए वकO ओवर पूवO सभा आयोिजत क(cid:28) जाएगी ।
(3) िछ(cid:26)ण से पूवO और स(cid:18)प ु-रत सकं लन को नीचे उतारन ेसे पूवO, केbसग को वायु(cid:21)\ दशा म8 शलै -समूह दाब से कम
से कम दस (cid:20)ितशत अिधक दाब पर परी>ण (cid:4)कया जाएगा।
(4) कूप सzवbसग स(cid:4)ं 5याu का िनT पादन, इस (cid:20)योजन के िलए (cid:20)ािधकृत (cid:4)कसी स>म rि" के (cid:20) य> पयOवे>ण म 8
(cid:4)कया जाएगा।
(5) (cid:20) य के rि" [म और yलोर Gलॉक के बीच क(cid:28) तार लाइन स ेहटकर रहगे ा।
(6) सभी rि" ;व ाbबग और खुरचन ेक(cid:28) सं(cid:4)5याu के दौरान बbे लग लाइन से एक सुरि>त दरू ी पर रहग8 े ।
(7) एक मा;टर (cid:31)ार वॉ(cid:6)व और निलका हगH र को पूवO-सकं िलत (cid:4)कया जाएगा और उ(cid:25) ह8 निलकाu के खqचने या
अंदर चलान ेके दौरान कूप के (cid:20)ित>ेप करने क(cid:28) दशा म8 कूप पर सुगमता से उपलGध कराया जाएगा ।
(8) (cid:4)कसी भी कूप सzवbसग स(cid:4)ं 5या को स(cid:4)5य कूप म8 िनTप ा(cid:4)दत नहq (cid:4)कया जाएगा जब तक (cid:4)क उिचत Gल ोआउट
(cid:20)ीवे(cid:25)ट र अस8बली को सुरि>त (cid:21)प स ेस;ं थािपत और अनुरि>त नहq (cid:4)कया गया ह ै।
(9) कूप सzवbसग सं(cid:4)5या को (cid:20)ारंभ करन े स े पूवO Gल ो आउट (cid:20)ीवे(cid:25) टर अस8बली का दाब और कायO परी>ण (cid:4)कया
जाएगा ।
(10) (cid:4)कसी भी निलका को कूप से बाहर नहq िनकाला जाएगा जब तक (cid:4)क कूप को सही तरह से (cid:4)कल नहq कर (cid:4)दया
जाता ह।ै
77778888.... ततततललेेललेे ककककाााा ककककृृृृिििि(cid:11)(cid:11)(cid:11)(cid:11)मममम उउउउ2222थथ थथ ाााापपपपनननन....---- (1) जब तक (cid:4)क एक जलम(cid:138) न पपं का इस (cid:20)योजन के िलए उपयोग न (cid:4)कया जा रहा
हो, कूप के पास उिचत (cid:21)प से िनzमत एक कायकO रण मंच क(cid:28) A यव; था क(cid:28) जाएगी जहाँ कृिEम उ थापन उप; कर का
उपयोग (cid:4)कया जाना ह।ै
(2) कोई भी मर(cid:18)म त, ;न हे न या aीजन तब तक नहq (cid:4)कया जाएगा जब तक (cid:4)क पंbपग यिू नट बंद नहq कर दी
जाती।
(3) गैस उ थ ापन, आंतराियक गैस उ थ ापन या म)ु त R लजं न उ थापन प\ितय(cid:16) के िलए सभी पTृ ठ िनयEं ण वॉ(cid:6)व (cid:16)
को आसानी स ेपहचान के िलए ;प Tट (cid:21)प से िचि(cid:25)हत (cid:4)कया जाएगा।
(4) (cid:20) य के खान का (cid:20)बंधक यह सिु नि(cid:147)त करेगा (cid:4)क कृिEम, मा‘यिमक या बढ़ा %आ (cid:20)ितपzू त सं(cid:4)5या से िनT पादन
से पूव O काय O सरु >ा िव‹ेषण (cid:4)कया गया ह ै और उनके उपयु" तकनीक(cid:28) तथा अ(cid:25)य िनयंEण उपाय तैयार कर िलया
गया ह।ै
(5) (cid:20)बंधक (cid:31)ारा Aय वहार संिहता तैयार (cid:4)कया जाएगा और काय O म 8 लगाए गए सभी rि"य(cid:16) को प-रचािलत
(cid:4)कया जाएगा।34 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
77779999.... उउउउ2222पप पप ााााददददकककक ककककूूूूपपपप कककक---- अअअअ++++थथथथााााययययीीीी बबबबददंंददंं ीीीी....---- (1) जब (cid:4)कसी उ प ादक कूप को तीस (cid:4)दन से अिधक क(cid:28) अविध के िलए
अ;थायी (cid:21)प से बंद करने का आशय हो तब उस े पकं या जल या तेल या नमक के घोल या (cid:4)कसी िवशषे रसायन स े
भर (cid:4)दया जाएगा िजससे (cid:4)क तरल ; तंभ का (cid:26)व ; थिै तक दाब कूप शीषO पर पेpोिलयम का >रण रोकने के िलए शलै -
समूह दाब को असंतिु लत करे।
(2) (cid:4)5समस pी के िनयंEण वॉ(cid:6)व (cid:16) को पूणO (cid:21)प स ेबंद कर (cid:4)दया जाएगा और िनयंEण च5(cid:16) को हटा (cid:4)दया जाएगा।
(3) (cid:4)5समस pी क(cid:28) परी>ा इस (cid:20)योजन के िलए (cid:20)ािधकृत (cid:4)कसी स>म rि" (cid:31)ारा तीस (cid:4)दन(cid:16) म 8एक बार >रण
के िलए क(cid:28) जाएगी और य(cid:4)द ऐसी परी>ा के दौरान (cid:4)कसी >रण का पता चलता ह ैतो वह स>म rि" उसे रोकने के
िलए तरु (cid:25)त कारOवाई करेगा।
(4) (cid:20) य के ऐसी परी>ा क(cid:28) एक -रपोटO उस A यि" (cid:31)ारा अिभिलिखत क(cid:28) और रखी जाएगी िजसने परी>ा क(cid:28) ह।ै
(5) कूप शीषO को एक र>ा उपाय के तौर पर अिधमानतः उपयु" (cid:21)प से अिभकि(cid:6)पत सुवा(cid:132) सरं >ा ढ) ) न से
ढक (cid:4)दया जाना चािहए।
88880000.... पपपप(cid:29)(cid:29)(cid:29)(cid:29)रररर2222यययय4444 ककककूूूूपपपप???? कककक---- ििििववववधधधधााााययययनननन अअअअपपपप(cid:22)(cid:22)ेे(cid:22)(cid:22)ेे ााााएएएए..ँँ..ँँ---- (1) जब कोई कूप प-र य ाग (cid:4)कए जाने के िलए आशियत हो, तब -
(क) सभी पारग(cid:18)य शलै समूह(cid:16) को सीम8ट से अलग कर (cid:4)दया जाएगा;
(ख) कम स े कम पचास मीटर ल(cid:18) बाई का एक सीम8ट Rल ग कूप या उपयु)त सेत-ु R लग के तल म 8 लगाया
जाएगा;
(ग) कम स े कम पचास मीटर ल(cid:18) बाई का एक सीमट8 R लग, पृT ठ केbसग के सूE या सेत-ु R लग के आरपार
लगाया जाएगा;
(घ) सेलर या कूप के चार(cid:16) ओर के गतO भर (cid:4)दए जाएँगे और भिू म को मलू ;तर पर बहाल (cid:4)कया जाएगा;
और
(ड.) आव-रत कूप(cid:16) का, तीन मीटर वाले सीम8ट Rलग सिहत आ(cid:130)छ ा(cid:4)दत िछ(cid:26)ण(cid:16) के िछ(cid:26) शीषO के ऊपर एक
सेत-ु Rल ग लगा कर, प-र य ) त (cid:4)कया जा सकेगा।
(2) (cid:20) य के प-र य )त कूप को ;थ ल पर और रेखांक पर ;प(cid:128) (cid:21)प से (cid:20)दzशत कर पहचान (cid:4)कया जाएगा ।
अअअअ(cid:15)(cid:15)(cid:15)(cid:15)ययययाााायययय –––– 7777
पपपपााााईईईईपपपप ललललााााइइइइनननन???? ::::ाााारररराााा पपपप(cid:29)(cid:29)(cid:29)(cid:29)ररररववववहहहहनननन
88881111.... ललललाााागगगग ूू ूूहहहहोोोोननननाााा....---- इस अ‘याय के िविनयम, तेल >ेE म8 िविनयम 12 के अधीन यथा प-रभािषत (cid:4)कसी खान के भीतर नई
पेpोिलयम पाईप लाइन को िबछाने के िलए या िवjमान पाईप लाइन म 8 (cid:4)कसी (cid:20)कार का मह वपूण O प-रवतOन करने
के िलए और पाईप लाइन(cid:16) (cid:31)ारा पेpोिलयम के प-रवहन को लागू ह(cid:16)गे।
88882222.... पपपपााााईईईईपपपप ललललााााइइइइनननन ििििबबबबछछछछाााानननन ेे ेेकककक---- पपपपbbbbिििितततत....---- (1) तरल और (cid:20)ाकृितक गैस पारेषण पाईप लाइन और पाइbपग (cid:20)णाली के
िवतरण तेल उjोग सरु >ा िनदेशालय के मानक, OISD-STD-141 और OISD-STD- 226 या उनके संशोिधत
सं;क रण के अनसु ार िबछाए जाएँगे।
(2) जब तेल >ेE म8 (cid:4)कसी भी खान के भीतर (cid:4)कसी नए पेpोिलयम पाईप लाइन का िबछाया जाना या िवjमान
पाईप लाइन म8 कोई मह वपणू O प-रवतOन करना आशियत हो, तो ; वमी, अिभकताO या (cid:20)बंधक िन(cid:18)न िलिखत को
सुिनि(cid:147)त करेगा, अथातO -
(क) खान म8 उस >ेE का बिह;त ल रेखाकं रख िलया गया ह ै जहाँ पाईप लाईन का िबछाया जाना
(cid:20);त ािवत ह ैऔर िजस रेखांक म8 उपयोग का अिधकार ; थािपत हो चकु े भूिम का िव; तार एवं पाईप का मागO
सु;प Tट (cid:21)प से वसै े िजल(cid:16) एवं (cid:20)ा(cid:25)त (cid:16) सिहत (cid:4)दखाया गया हो िजससे होकर पाईप गुजरेगा;¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 35
(ख) जहाँ (cid:4)कसी ऐसे रेलपथ या (cid:4)कसी लोक सकं मO के, िजसक(cid:28) बावत यह िविनयम के(cid:25) (cid:26)ीय सरकार के
(cid:4)कसी साधरण या िवशेष आदशे के कारण लागू ह,ै या (cid:4)कसी ऐसी लोक सड़क या भवन या अ(cid:25) य ; थायी
संरचना के, जो खान के ;व ामी का नहq ह,ै पैतालीस मीटर के भीतर पाईप लाइन िबछाए जान े का (cid:20); ताव
ह ै तो, (cid:4)कसी रेलपथ क(cid:28) दशा म,8 संबंिधत रेल (cid:20)शासन को, और यथापूवv) त (cid:4)कसी लोक सकं मO क(cid:28) दशा म 8
ऐसे (cid:20)ािधकारी को जो के(cid:25)(cid:26) ीय सरकार साधारण या िवशषे आदशे (cid:31)ारा िनSदT ट करे, रेखाकं के साथ एक
सूचना भेजी जाएगी।
(3) जब कोई पाईप लाइन चाल ू हो चुका हो, तब ; वामी, अिभकता Oया (cid:20)बंधक उपरो) त अप>े ाu के समथOन म 8
त क ाल ;व -(cid:20)माणन (cid:20);त तु करेगा और चाल ू होने क(cid:28) वा; तिवक तारीख >ेEीय िनरी>क को सूिचत करेगा एव ं
उसक(cid:28) एक (cid:20)ित मु}य िनरी>क और िजला मिज; pेट को भेजेगा।
(4) खान म8 वषO के दौरान िबछायी गई सभी नई पाईप लाइन(cid:16) और िवjमान पाईप लाइन(cid:16) म8 (cid:4)कए गए (cid:4)कसी
भी मह वपूण O प-रवतनO के बारे म 8 G यौरे रख े जाएँगे तथा इसक(cid:28) एक (cid:20)ित को वाzषक िववरणी के साथ >ेEीय
िनरी>क को भेजी जाएगी।
88883333.... पपपपााााईईईईपपपप ललललााााइइइइनननन औऔऔऔरररर ;;;;फफफफccccटटटटगगगग???? ककककाााा ििििडडडडजजजजााााइइइइनननन....---- (1) पाईप लाइन को इस (cid:20)कार िडजाइन (cid:4)कया जाएगा जो ऐसी सभी
दशाu म8 पयाOI सावOजिनक सरु >ा सिु नि(cid:147)त करती हो िजनसे सामना होना सं;थापना, परी>ण, चालू करने और
संचालन क(cid:28) प-रि;थितय(cid:16) के दौरान सभं ाA य हो।
(2) सभी सामिaय(cid:16) और उप;क र(cid:16) का चयन इस (cid:20)कार (cid:4)कया जाएगा (cid:4)क उपयोग संबधं ी प-रि;थितय(cid:16) म 8 सुर>ा
और उपयु"ता सिु नि(cid:147)त क(cid:28) जा सके।
(3) सभी पाईप, वॉ(cid:6)व , yल8ज तथा अ(cid:25)य (cid:4)फoटग तेल उjोग सुर>ा िनदशे ालय के मानक, OISD-STD-141 तथा
OISD-STD-226 या उनके सशं ोिधत सं;क रण के अन(cid:21)ु प ह(cid:16)गे।
(4) सभी भिू मगत पाईप या उनके घटक उपयु) त वा(cid:132) जंग-रोधी कोoटग या प(cid:25)े ट और कैथोिडक संर>ण के
उपयोग (cid:31)ारा जंग से सरं ि>त (cid:4)कए जाएँगे और सभी बिह;त ल पाईप एव ं उनके घटक उपयु) त जंग-रोधी कोoटग
लगाकर जंग से सरं ि>त (cid:4)कए जाएगँ े।
(5) (क) (cid:20)चालन एवं अनरु >ण और आपात के िनयंEण के िलए जहाँ अपेि>त हो, िवभाजक वॉ(cid:6) व सं; थािपत
(cid:4)कए जाएँगे और वॉ(cid:6)व (cid:16) का अव; थान िनि(cid:147)त करने के िलए जगह क(cid:28) ;थ लाकृित, स(cid:4)ं 5या एवं अनरु >ण क(cid:28)
सुगमता जसै े कारक िजसम 8से) सन लाइन (cid:4)फल क(cid:28) अपे>ाए ँशािमल ह,H को ‘ यान म 8रखा जाएगा:
पर(cid:25)त ,ु दो 5मागत िवभाजक वॉ(cid:6) व(cid:16) के बीच क(cid:28) दरू ी (cid:4)कसी भी दशा म 8 पचास (cid:4)कलोमीटर स े अिधक
नहq होगी।
(ख) िवभाजक वॉ(cid:6)व क(cid:28) Aय व;थ ा जोिखम मू(cid:6) यांकन सवw>ण के आधार पर (cid:4)कया जाएगा, िजसस े खतरा
और पाईप लाइन से आकि;मत उ(cid:25) मोचन स े >ित को सीिमत (cid:4)कया जा सके और पाईप लाइन के मर(cid:18)म त
तथा अनुर>ण को ससु ा‘य (cid:4)कया जा सके।
(6) दाब सुर>ा वॉ(cid:6)व या पयाIO >मता और संवेदनशीलता यु) त अ(cid:25) य युि"याँ पाईप लाइन नेटवकO म8 सामा(cid:25) य
(cid:20)चालन दाब को सुिनि(cid:147)त करने के िलए सं;थािपत (cid:4)कए जाएगँ े।
(7) पाईप लाइन को बहाव, कटाव, भ-ू ; खलन, अ यिधक भार, संघात या अ(cid:25)य सभं ािव त खतर(cid:16), जो पाईप
लाइन म 8गभं ीर संचलन या >ित का कारण बन सकते ह,H से बचाव के िलए पयाOI सावधानी ली जाएगी ।
(8) जहाँ पाईप लाइन रेल या लोक-मागO के आर-पार िबछाया जाता हो, वहा ँ संबिं धत (cid:20)ािधका-रय(cid:16) (cid:31)ारा
िविनSद(cid:128) दरू ी तक पाईप के खोल (केbसग) को िव;ता-रत (cid:4)कया जाएगा।
88884444.... पपपपााााईईईईपपपप ललललााााइइइइनननन कककक---- बबबबननननााााववववटटटट,,,, उउउउससससककककाााा ििििबबबबछछछछााााययययाााा जजजजााााननननाााा औऔऔऔरररर ररररखखखख----ररररखखखखाााावववव ....---- (1) पाईप लाइन(cid:16) को जमीन के नीचे कम स ेकम
उतने आवरण से ढ़कँ ा जाएगा जो तले उjोग सरु >ा िनदशे ालय के मानक, OISD-STD-141 या उसके संशोिधत
सं;क रण के अनु(cid:21)प हो।36 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) पाईप लाइन(cid:16) को िबछान े क(cid:28) योजना, मागािO धकार या उपयोगािधकार के भीतर, पूवO-िचि(cid:25)हत सवwि> त
मागx के साथ-साथ बनाई जाएगी।
(3) पाईप लाइन को तब तक नहq िबछाया जाएगा, जब तक जमीन ; वामी के एकमाE िनयंEण म 8 नहq ह ै या
उपयोगािधकार (cid:20)ाRत न कर िलया गया ह।ै
(4) सभी वेb(cid:6)डग और वे(cid:6)ड िनरी>ण, तले उjोग सुर>ा िनदशे ालय के मानक, OISD-STD-141 या उसके
संशोिधत सं;क रण के अन(cid:21)ु प (cid:4)कया जाएगा।
(5) गतO को वापस भरने का काय,O पाईप लाइन को p8च म 8 िबछान े के पJ चात ् और उसे चालू करने के पूव O (cid:4)कया
जाएगा।
(6) (क) पाईप लाइन क(cid:28) मौजूदगी और चेन दरू ी को दशानO े के िलए पूरे पाईप लाइन माग O के साथ-साथ
पाईप लाइन िच(cid:25)ह क लगाए जाएगँ े।
(ख) िच(cid:25)ह क(cid:16) को राTp ीय राजमागx या (cid:20)ातं ीय लघ ु राजमागx, (cid:20)मुख िजला सड़क(cid:16), रेलपथ 5ॉbसग,
मोड़(cid:16) और जलाशय 5ॉbसग के (cid:20) य ेक (cid:4)कनार(cid:16) पर भी लगाया जाएगा और अ(cid:25)य 5ॉbसग पर जहाँ तृतीय प>
क(cid:28) गितिविधया ंअपिे >त ह Hऔर ;टेशन(cid:16) के (cid:20)वेश (cid:31)ार पर एक िच(cid:25) हक लगाया जाएगा ।
(ग) मागािO धकार या उपयोगािधकार म 8 पाईप लाइन के साथ-साथ िन(cid:144) (cid:20)कार के िच(cid:25) हक ;थािपत
(cid:4)कए जाएँगे, अथातO ् -
(i) (cid:4)कलोमीटर िच(cid:25)ह क;
(ii) दो सौ पचास मीटर से अिधकतम अंतराल पर दोन(cid:16) ओर मागािO धकार या उपयोगािधकार सीमा
;त(cid:18)भ;
(घ) चेतावनी साइन बोड,O 5ॉbसग(cid:16) पर िच(cid:25) हक >ेEीय या िह(cid:25)दी और अंaेजी भाषाu म 8 चेतावनी
शGद , "उ¤ दाब पाईप लाइन", ''संचालक कंपनी का नाम'' और ''आपातकालीन दरू भाष संपकO स}ं या''
दशाOएँगे ।
(7) सड़क(cid:16), रेल मागx या अ(cid:25)य लोक संकमx जसै ी सरं चनाu को पार करन ेके िलए स>म (cid:20)ािधकारी स ेअनमु ित
(cid:20)ाRत क(cid:28) जाएगी ।
(8) पाईप लाइन पर के (cid:4)कसी भी bबद ु पर (cid:25)यूनतम हाइ[ोिलक परी>ण दाब, आतं -रक अिभकि(cid:6)पत दाब का
1.25 गुना होगा।
(9) परी>ण दाब को चौबीस घंटे क(cid:28) एक (cid:25)यूनतम अविध के िलए रखा जाएगा, िसवाय उन ; थान(cid:16) के जहा ँ
िवशेष (cid:21)प स े उ(cid:6)लेख (cid:4)कया गया हो।
88885555.... पपपपााााईईईईपपपप ललललााााइइइइनननन???? ककककोोोो चचचचाााालललल ूू ूूककककररररनननन ेे ेेसससस ेे ेेपपपपववूूववूू ** **ककककेेेे (cid:16)(cid:16)(cid:16)(cid:16)ााााररररंंंंििििभभभभकककक ककककाााायययय..**..**---- पाईप लाइन(cid:16) को चालू करन े संबंधी (cid:4)5या-कलाप(cid:16) को आरंभ
करने से पूवO, (cid:4)कसी खान का ;व ामी, अिभकता Oऔर (cid:20)बंधक यह सिु नि(cid:147)त कर8गे (cid:4)क -
(क) चाल ूकरने क(cid:28) कायO(cid:20)णाली तैयार ह;ै
(ख) संपूणO पाईप लाइन और स(cid:18) ब\ ; टेशन पाइbपग के िलए दाब परी>ण काय Oपूण Oकर िलया गया ह;ै
(ग) बिह;त ल क(cid:28) पाइbपग और कोरदार जोड़(cid:16) का दाब -रसाव जाँच पूण Oहो गया ह;ै
(घ) पाईप लाइन को साफ कर िलया गया हो तथा उसम 8से मलव ेआ(cid:4)द िनकाल (cid:4)दया गया ह;ै
(ड.) मु}य लाइन िवभाजक वॉ(cid:6)व अपे>ानसु ार सं;थािपत कर (cid:4)दए गए ह;ै
(च) सभी गो(cid:6)ड ने जोड़(cid:16) को िनरीि>त और ;वीकृत कर िलया गया ह;ै
(छ) पाईप लाइन खंड के cयािमतीय सवw>ण, य(cid:4)द लागू हो, कर िलया गया ह;ै
(ज) पाईप लाइन(cid:16) को चाल ूकरन ेके कायO के पयवO े>ण के िलए पयाRO त सं} या म 8 (cid:20)िशि>त और अनुभवी पदधारी
िनयु)त कर िलए गए ह।H
88886666.... पपपपााााईईईईपपपप ललललााााइइइइनननन ककककोोोो पपपपनननुुनुु ःःःः ििििबबबबछछछछााााननननाााा,,,, पपपपननननुुुु ःःःः ननननववववीीीीककककृृृृतततत ययययाााा ममममरररर(cid:18)(cid:18)(cid:18)(cid:18)ममममतततत ककककररररननननाााा ....---- जहा ँ मु} य िनरी>क क(cid:28) यह राय हो (cid:4)क ऐसा
करना लोक सुर>ा के िहत म8 ह ै तो वह, िलिखत आदशे (cid:31)ारा, ; वामी, अिभकताO या (cid:20)बंधक स,े ऐसी अपे>ाu के¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 37
अनसु ार जो वह ऐस े आदशे म 8 िविनSदT ट करे ऐसी पाईप लाइन को पनु : िबछाए जाने, नवीकरण करने या मर(cid:18) मत
करने के िलए अपे>ा कर सकेगा।
88887777.... ममममाााागगगगाााािि**िि**धधधधककककाााारररर ययययाााा उउउउपपपपययययोोोोगगगगााााििििधधधधककककाााारररर ककककाााा ररररखखखख----ररररखखखखाााावववव औऔऔऔरररर ममममोोोोड़ड़ड़ड़???? ककककाााा ििििननननररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)णणणण....----(1) ;वामी, अिभकताO या (cid:20)बंधक,
पाईप लाइन मागािO धकार पर और उसके आस-पास बिह;त ल क(cid:28) प-रि;थितय(cid:16), -रसाव के सकं ेत, कंपनी (cid:31)ारा (cid:4)कए
गए के आलावा अ(cid:25)य िनमाOण संबंधी गितिविधय(cid:16) और पाईप लाइन क(cid:28) सुर>ा और सं(cid:4)5या को (cid:20)भािवत करने वाल े
(cid:4)क(cid:25)ह q अ(cid:25)य कारक(cid:16) का अवलोकन करने के िलए एक आविधक पाईप लाइन गJत काय5O म रखेगा।
(2) उन गितिविधय(cid:16) जसै े (cid:4)क सड़क िनमाणO , भूिम कटाव, खुदाई, और अ(cid:25) य जैस े पाईप लाइन (cid:20)णाली पर
अित5मण और वन;पित िवकास पर िवशेष ‘ यान (cid:4)दया जाएगा।
(3) अित5मण, उठाईिगरी, चोरी और अ(cid:25)य शरारती त व(cid:16) क(cid:28) गितिविधय(cid:16) को तरु ंत िजला (cid:20)शासन और अ(cid:25)य
संबंिधत (cid:20)ािधका-रय(cid:16) के स(cid:127)ं ान म8 लाया जाएगा।
(4) मागािO धकार या उपयोगािधकार और वॉ(cid:6) व ;थल सिहत िविभ› ;टेशन(cid:16) तक प%चँ बनायी रखी जाएगी
ता(cid:4)क रख-रखाव दल क(cid:28) सुगम प%चँ सुिनि(cid:147)त हो सके और पाईप लाइन िच(cid:25) हक(cid:16) क(cid:28) दJृ यता या उपलGधता
सुिनि(cid:147)त क(cid:28) जा सके।
88888888.... ममममाााागगगगाााािि**िि**धधधधककककाााारररर ययययाााा उउउउपपपपययययोोोोगगगगााााििििधधधधककककाााारररर कककक---- गगगगYYYYतततत....---- (1) बिह; तल क(cid:28) प-रि;थितय(cid:16), -रसाव, कोई िविनमाOण
गितिविध, अित5मण, बहाव और पाईप लाइन क(cid:28) सुर>ा और सं(cid:4)5या को (cid:20)भािवत करन े वाले (cid:4)क(cid:25) हq अ(cid:25)य कारक(cid:16)
का अवलोकन करने के िलए (cid:20) येक मास म 8कम से कम एक बार मागाOिधकार क(cid:28) ;थ ल गJत क(cid:28) जाएगी।
(2) सड़क और रेलपथ 5ॉbसग(cid:16) का हर तीन मास म8 कम से कम एक बार िनरी>ण (cid:4)कया जाएगा।
(3) जलाशय 5ॉbसग(cid:16) का हर एक साल म8 कम से कम दो, मानसनू से पूव O और मानसनू के पJ चात या अचानक
आई बाढ़ के पJच ात, िनरी>ण (cid:4)कया जाएगा।
(4) रेल या सड़क पलु और टंगे %ए 5ॉbसग(cid:16) का िनरी>ण उन ; थान(cid:16) पर, आधार(cid:16) और सरं चनाu और जंग
रोधी कोoटग(cid:16) क(cid:28) जाँच करने के िलए हर तीन मास म8 कम से कम एक बार (cid:4)कया जाएगा, जहाँ पाईप भिू म से बाहर
आत ी ह ैया उसम 8(cid:20)िवTट होती ह।ै
(5) मागािO धकार या उपयोगािधकार का िनरी>ण पाईप लाइन क(cid:28) परू ी लंबाई के िलए एक वष O म8 कम स े कम
एक बार, अिधमानतः मानसून के बाद, खान के पदधा-रय(cid:16) (cid:31)ारा (cid:4)कया जाएगा।
(6) मागािO धकार या उपयोगािधकार के आसपास के aामीण(cid:16) तथा जनसाधारण को -रसाव के सभं ाA य प-रणाम(cid:16)
से यथोिचत (cid:21)प स ेअवगत कराया जाएगा और इस ेिनयिमत अकं े>ण के एक भाग के (cid:21)प म 8शािमल (cid:4)कया जाएगा;
(7) -रसाव और उठाईिगरी के संभाA य प-रणाम(cid:16) के बारे म 8 मागािO धकार और उपयोगािधकार के >Eे के
आसपास पुिलस ;टेशन, पंचायत और िजला अिधका-रय(cid:16) के साथ िनयिमत संपकO रखा जाएगा।
88889999.... पपपपााााईईईईपपपप ललललााााइइइइनननन ककककेेेे ररररखखखख----ररररखखखखाााावववव (cid:16)(cid:16)(cid:16)(cid:16);;;;VVVVययययाााा ययययाााा ििििननननययययममममााााववववललललीीीी....---- (1) (cid:20) यके खान का (cid:20)बंधक मलू उप; कर िविनमातO ा
(cid:31)ारा दी गई िसफा-रश(cid:16) और ;थ ा नीय प-रि;थितय(cid:16) को ‘ यान म 8 रखते %ए संपूणO पाईप लाइन (cid:20)णाली के िलए
िनयंEण (cid:20)णाली और सुर>ा अंतबO\ता (cid:20)णाली के िलए एक िव;तृत सं(cid:4)5या और रख-रखाव कायO(cid:20)णाली अथवा
िनयमावली को सूEब\ और कायाOि(cid:25)वत करेगा।
(2) िनयमावली पुि;तका म 8 आविृ त, अथातO ् दैिनक, साIािहक, मािसक, अ\वO ाzषक और वाzषक, के साथ
िनवारक रख-रखाव के काय5O म तथा रख-रखाव के (cid:20) यके कायO5म के दौरान क(cid:28) जान े वाली (cid:4)5याकलाप(cid:16) को
शािमल (cid:4)कया जाएगा।
(3) रख-रखाव काय5O म, िजसम8 सरु ि>त एवं द>तापूवकO पाईप लाइन म8 -रसाव को जानने, पथृ क करने और
मर(cid:18)म त करने जैस े(cid:4)5याकलाप भी शािमल ह(cid:16)गे, िवकिसत एवं संगठन के भीतर के स>म (cid:20)ािधकारी (cid:31)ारा अनुमो(cid:4)दत
(cid:4)कए गए Aय वहार सिं हता के अन(cid:21)ु प ह(cid:16)ग।े
(4) मानक (cid:20)चालन (cid:4)5यािविध िवकिसत (cid:4)कया जाएगा और उसे अनुरि>त (cid:4)कया जाएगा।
(5) आंत-रक िनरी>णीय एवं अिनरी>णीय पाईप लाइन(cid:16) क(cid:28) अ>तता मू(cid:6)य ांकन के िलए मानक (cid:20)चालन
(cid:4)5यािविधय(cid:16) का भी अनुपालन (cid:4)कया जाएगा।
(6) (cid:4)कसी भी गैर पुनराविृ त (cid:20)कृित के कायO के िलए काय Oसुर>ा िव‹ेषण (cid:4)कया जाएगा।38 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(7) मर(cid:18)मत और रख-रखाव कायx के िलए कायO अनमु ित (cid:20)णाली का अनुपालन (cid:4)कया जाएगा।
(8) प-रवतनO (cid:20)बंधन:::: समय-समय पर प-रवतOन (cid:20)बंधन द; तावेज के मा‘ यम से (cid:20)चालन A यवहार(cid:16) क(cid:28) योजनाए ँ
और काय O (cid:20)णािलया ँ (cid:20)चालन क(cid:28) शतx म8 प-रि;थित क(cid:28) मांग के अनसु ार सशं ोिधत क(cid:28) जा सकती ह,ै िजसका
द;तावेज़ 5मानुसार सं}य ा(cid:4)ं कत (cid:4)कया जाएगा और इसे ;थल(cid:16) पर (cid:20)ितय(cid:16) के साथ खान म 8रखा जाएगा।
(9) प-रवतOन (cid:20)बंधन म8 (cid:20)चालन क(cid:28) शतx म8 प-रवतOन के औिच य और उसके प-रणाम ;व(cid:21)प होने वाले लाभ(cid:16)
को शािमल (cid:4)कया जाएगा।
(10) प-रवतOन के समापन के साथ साथ, प-रवतOन (cid:20)बंधन को "जैसा िनzमत" रेखािचE और मानक (cid:20)चालन
(cid:4)5यािविधय(cid:16) म 8(cid:4)कए गए प-रवतOन(cid:16) को संशोिधत करत े%ए बदं (cid:4)कया जाएगा।
99990000.... पपपपााााईईईईपपपप ललललााााइइइइनननन (cid:16)(cid:16)(cid:16)(cid:16)िििितततत++++थथथथाााापपपपनननन औऔऔऔरररर पपपपननुुननुु """"ववववििििधधधधममममाााा’’’’यय यय ककककररररणणणण ननननीीीीिििितततत....---- (cid:20) य ेक खान म8 सभी पाईप लाइन(cid:16) के मर(cid:18)मत, (cid:20)ित;थापन,
सुरि>त (cid:20)चालन दाब के पनु मूO(cid:6)यांकन तथा अविश(cid:128) जीवन क(cid:28) पनु zविधमा(cid:25) यकरण के िलए द;तावेज़ीकृत नीित
होगी, जो अम-े रकन सोसाइटी ऑफ मेकािनकल इंजीिनयर मानक(cid:16) के अनु(cid:21)प होगी।
99991111.... पपपपााााईईईईपपपप ललललााााइइइइनननन ककककाााा पपपप(cid:29)(cid:29)(cid:29)(cid:29)रररर2222ययययाााागगगग ययययाााा ककककाााायययय ** ** ++++थथ थथ गगगगनननन....---- कोई भी ऐसी पाईप लाइन (cid:20)णाली को, िजसक(cid:28) प-रवहन के िलए और
कोई आवJय कता न रह गई हो, उससे सभी खतरनाक तरल पदाथx को हटाते %ए सेवा से बाहर कर िलया जाएगा
और य(cid:4)द, खान का ;व ामी, अिभकता O या (cid:20)बंधक पाईप लाइन (cid:20)णाली के पूण O या उसके (cid:4)कसी भाग का प-र याग
करने का िनणयO लेता ह,ै तो वह िन(cid:144)िलिखत को ‘ यान म 8रखत े%ए एक िव;तृत योजना तैयार करेगा, अथाOत् -
(क) प-र य ाग करन े स े पूवO पाईप लाइन खंड और सुिवधाu को आपzू त के सभी eोत(cid:16) स े सकारा मक
पृथक(cid:28)करण करत े%ए िवयोिजत कर (cid:4)दया जाएगा;
(ख) प-र य )त क(cid:28) जाने वाली पाईप लाइन (cid:20)णाली और सिु वधाu का नाइpोजन गैस या िनिT5य सामaी या
गितमान जल से प-रTकरण (cid:4)कया जाएगा और प-रTकरण के पJ चात पाईप लाइन के िसर(cid:16) को सकारा मक (cid:21)प स े
पृथक कर (cid:4)दया जाएगा;
(ग) प-र य )त या ;थ िगत (cid:4)कए गए पाईप लाइन के पुन£\ार क(cid:28) दशा म,8 अखंडता आJ वासन योजना िवकिसत
क(cid:28) जाएगी और खान के (cid:20)बंधक या अिभकताO (cid:31)ारा ह;ता>-रत (cid:4)कया जाएगा।
99992222.... दददद++++ततततााााववववेज़ेज़ेज़ेज़ीीीीककककररररणणणण::::---- िडजाइन, िविनमाOण, मानिचE, रख-रखाव, पाईप लाइन ;वा;(cid:129)य िनगरानी और स(cid:4)ं 5याu के
अिभलेख, जो (cid:4)क इस अ‘याय म8 इंिगत (cid:4)कए गए ह,H को संगठनीय (cid:20)ितय(cid:16) म8 अथवा इले)pॉिनक ; व(cid:21)प म 8 खान म 8
अनुरि>त (cid:4)कए जाएगँ े ।
99993333.... पपपपााााईईईईपपपप ललललााााइइइइनननन???? ककककेेेे ििििललललएएएए आआआआपपपपाााातततत (cid:16)(cid:16)(cid:16)(cid:16);;;;VVVVययययााााएएएए::ँँ::ँँ---- (1) हर ऐसी खान को, िजसम8 कोई पाईप लाइन पेpोिलयम या (cid:20)ाकृितक
गैस के प-रवहन के िलए िबछायी जाती ह,ै (cid:20)बंधक, इन िविनयम(cid:16) के (cid:20)वृ त होने के साठ (cid:4)दन के भीतर या (cid:4)कसी नए
सं;थ ापन क(cid:28) दशा म8 सं;थ ापन के तीस (cid:4)दन के भीतर, आग लगने, पाईप लाइन से अिनयंिEत पेpोिलयम या (cid:20)ाकृितक
गैस के िनकलन,े पाईप लाइन के फट जान े या उस े नकु सान हो जान े क(cid:28) दशा म 8 क(cid:28) जाने वाली कारOवाई िविनSदT ट
करते हए ुआपात (cid:20)(cid:4)5याएँ >ेEीय िनरी>क को (cid:20); तुत करेगा।
(2) पाईप लाइन और ;टेशन िवशेष के िलए, आपात (cid:20)(cid:4)5याu क(cid:28) (cid:20)ितय(cid:16) को रेखाकं (cid:16) और से) शन(cid:16) और
िन(cid:18)न िलिखत अिभलखे (cid:16) के साथ (cid:20) य ेक िनयंEण क> म 8रखा जाएगा; अथाOत -
(क) सं(cid:4)5या म क आँकड़;े
(ख) पाईप लाइन गJत के -रकॉड;O
(ग) -रसाव या दोहन के -रकॉड;O
(घ) िनयिमत या असामा(cid:25)य िनरी>ण के -रकॉड;O और
(ड.) पाईप लाइन क(cid:28) मर(cid:18)मत के -रकॉड।O¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 39
अअअअ(cid:15)(cid:15)(cid:15)(cid:15)यय यय ाााायययय –––– 8888
गगगगससैैससैै ???? औऔऔऔरररर आआआआगगगग सससस ेे ेेससससररंंररंं (cid:22)(cid:22)(cid:22)(cid:22)ाााा
99994444.... eeeeववववललललननननशशशशीीीीलललल ससससााााममममSSSSीीीी ककककाााा भभभभडडंंडडंं ााााररररककककररररणणणण औऔऔऔरररर उउउउपपपपययययोोोोगगगग....---- (1) (cid:20)चालन उप; कर क(cid:28) टं(cid:4)कय(cid:16) म8 ƒधन के िसवाय कोई भी
cवलनशील सामaी (cid:4)कसी कूप के तीस मीटर के भीतर संaह नहq (cid:4)कया जाएगा :
पर(cid:25)त ,ु जहा ँ िवशेष प-रि;थितयाँ िवjमान ह(cid:16) वहा ँ (cid:20)बंधक, उपरो)त सीमा के भीतर ऐसे संaहण क(cid:28)
अनमु ित, (cid:4)कए गए जोिखम िवJल ेषण के आधार पर और वैस े िनयंEण उपाय(cid:16) एवं अ(cid:25)य दशाu के (cid:20)सगं ाधीन जो वह
उसम8 िविनSदTट करे, िलिखत म 8द ेसकेगा।
(2) उप-िविनयम (1) म8 िनSदT ट (cid:20) यके अन(cid:127)ु ा का एक -रकॉड,O पयाOR त औिच य ता के साथ, अनुरि>त (cid:4)कया
जाएगा ।
(3) cवलनशील तरल पदाथx को सभं ालने और उसके उपयोग के िलए सुर>ा िडG ब(cid:16) का उपयोग (cid:4)कया जाएगा ।
(4) (cid:4)कसी ƒधन संaह से िनकास ऐसी (cid:4)दशा म 8होगी जो कूप और उप; कर से दरू हो।
(5) कोई भी cवलनशील तरल पदाथO िजसका yलैश bबद ुपसै ठ िडaी सिे (cid:6)सयस से कम हो उसका उपयोग सफाई
के उYेJय के िलए, (cid:20)बंधक, उप (cid:20)बंधक या (cid:4)कसी सं;थ ापन (cid:20)बंधक के िलिखत पूवO अन(cid:127)ु ा के िबना, नहq (cid:4)कया
जाएगा।
99995555.... हहहहााााििििननननककककााााररररकककक औऔऔऔरररर eeeeववववललललननननशशशशीीीीलललल गगगगससैैससैै ???? ककककेेेे (cid:16)(cid:16)(cid:16)(cid:16)िििितततत पपपपववूूववूू ाााावव**वव** धधधधााााििििननननययययााााँ.ँ.ँ.ँ.---- (1) कोई भी rि" (cid:4)कसी सले र, संप, गतO या (cid:4)कसी
प-र(cid:21)\ ;थ ान या जोन ''0'' जोिखमवाल े >ेE या ऐस े >ेE म,8 जहा ँ कोई yलेयर अक; मात बुझ गया हो, तब तक
(cid:20)वेश नहq करेगा या उसे (cid:20)वेश करने के िलए अन(cid:127)ु ात नहq (cid:4)कया जाएगा, जब तक (cid:4)क (cid:4)कसी स>म A यि" (cid:31)ारा वह
जाँचा न गया ह ैऔर गैस मु)त न पाया गया ह।ै
(2) जहाँ उप-िविनयम (1) म 8 उि(cid:6)लिखत कोई जाँच यह (cid:4)दखाता हो (cid:4)क cवलनशील गसै क(cid:28) सा(cid:26)ं ता, के(cid:25) (cid:26)ीय
िवjुत (cid:20)ािधकरण (सरु >ा और िवjुत आपzू त सबं ंधी उपाय) िविनयम 2010 के अधीन इस (cid:20)योजन के िलए
िविनSदTट सीमा स ेअिधक हो, तो वहाँ सं; थापन के तीस मीटर के भीतर के सभी केबल(cid:16) और सािधE से िवjतु ऊजा O
क(cid:28) आपzू त तुरंत काट दी जाएगी और (cid:20)cवलन के सभी eोत(cid:16) को उ) त >ेE से हटा (cid:4)दए जाएगँ े और सामा(cid:25)य कायO को
तब तक पुनआरO ंभ नहq (cid:4)कया जाएगा जब तक (cid:4)क उस >ेE को गैस मु) त नहq कर (cid:4)दया जाता ह ै।
(3) गैस संचयन के(cid:25)(cid:26) और गैस संपीडन संयंE म8 ऐस ेउपयु) त अव; थान(cid:16) पर जहा ँगैस -रसाव का खतरा सभं ाA य
हो, वहा ँ cवलनशील या िवषा" गसै (cid:16) क(cid:28) उपि;थित क(cid:28) िनरंतर िनगरानी और कzमय(cid:16) को सचेत करन े के िलए एव ं
कzमय(cid:16) क(cid:28) उपि;थित क(cid:28) संभावना तथा आग के असर को कम करन े हते ु (cid:4)कसी के (cid:31)ारा या ;वतः कारOवाई आरंभ
करने के िलए हाइ[ोकाबOन(cid:16) और हाह[ोजन स(cid:6) फाइड गसै क(cid:28), ; थायी गसै संसूचन (cid:20)णाली, य(cid:4)द हाइ[ोजन स(cid:6) फाइड
गैस मौजूद हो तो, Aय व;थ ा क(cid:28) जाएगी।
(4) उप-िविनयम (3) के अ(cid:25)त गOत िविनSदT ट से िभ(cid:25) न अ(cid:25)य उ पादन सं;थ ापन(cid:16) के िलए ; थायी गैस जाँच
(cid:20)णाली के (cid:20)ावधान का िनणOय गैस -रसाव स े जोिखम के आकलन के आधार पर (cid:4)कया जाएगा और ऐसे (cid:20) य ेक िनणOय
का एक -रकॉड OपयाORत औिच य ता के साथ रखा जाएगा।
(5) सं;थ ापन म 8 काय O अनुमित िनगOत करने स े पूवO गसै क(cid:28) उपि;थित का पता लगान े के िलए और वसै े >ेE(cid:16) म 8
उपयोग के िलए जो ;थायी गसै ससं ूचना (cid:20)णाली के दायरे म 8 न आते ह(cid:16), सुवा(cid:132) गैस ससं ूचक, जो हाइ[ोकाबOन(cid:16) एवं
हाइ[ोजन स(cid:6)फ ाइड गैस, य(cid:4)द िवjमान हो, के िलए हो, लगाए जाएगँ े।
(6) हाइ[ोजन स(cid:6)फाइड के उपि;थित का अिभ(cid:127)ान होन े पर, कूप शीष,O वेधन तल, शेल शके र >ेE, मड पंप
तथा टंक(cid:28) पर और उसके समीप के सभी rि" वैस ेउपय)ु त बचाव J वसन उपकरण धारण कर8गे, जो भारतीय मानक
Gय ूर(cid:16) के मानक आई एस-10245, भाग-। एवं आई एस-10245, भाग-।। के अनु(cid:21)प हो।
(7) िनयंEण के उपाय(cid:16) के िलए आवJयक rि"य(cid:16) स े िभ(cid:25) न अ(cid:25)य सभी को (cid:4)कसी सरु ि>त >ेE म 8 हटा िलया
जाएगा ।40 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(8) हाइ[ोजन स(cid:6)फाइड गैस ससं ूचक(cid:16) स े सपं ूण O जाँच क(cid:28) जाएगी और सामा(cid:25) य सं(cid:4)5याu को तब तक पुनआOरंभ
नहq (cid:4)कया जाएगा, जब तक (cid:4)क वह >ेE सं; थापन (cid:20)बंधक (cid:31)ारा परी>ा (cid:4)कए जाने के बाद गैस मु) त घोिषत न कर
(cid:4)दया गया हो।
(9) (cid:20) य के घटना का िववरण (cid:4)क cवलनशील गैस कब और कहा ँ पाई गई थी, उस े कब हटाया गया था और
इसक(cid:28) (cid:20)ितशतता को (cid:4)कसी Aय ि" (cid:31)ारा सं; थापन म 8-रकॉड O(cid:4)कया जाएगा और रखा जाएगा।
99996666.... ससससररुुररुु िििि(cid:22)(cid:22)(cid:22)(cid:22)तततत दददद(cid:29)(cid:29)(cid:29)(cid:29)ूूूूररररययययाााा ँँ ँँ....---- (1) कोई भी A यि", (cid:4)कसी कूप, पृथ(cid:4)कE, पेpोिलयम संaह टंक(cid:28) या c वलनशील गसै (cid:16) के अ(cid:25) य
असरं ि>त eोत(cid:16) के तीस मीटर के भीतर ध«ू पान नहq करेगा।
(2) (cid:20) य के खान म8 ''धू«पान िनषेध'' >ेE ; पT ट (cid:21)प स ेिनधा-O रत (cid:4)कया जाएगा।
(3) कोई भी अनावृत दीप या खुली आग, (cid:4)कसी कूप या (cid:4)कसी ऐस े ; थान के, जहाँ पेpोिलयम संचय (cid:4)कया गया
ह,ै तीस मीटर के भीतर िसवाय तब जब िविनयम 94 के उप-िविनयम (1) के अधीन (cid:20)बंधक (cid:31)ारा अन(cid:127)ु ा दी गई हो,
अनु(cid:127)ात नहq क(cid:28) जाएगी।
(4) कोई भी cव ाला-(cid:20)कार का हीटर, क(cid:130) च े तले का उपचारक या अ(cid:25) य जवाला-(cid:20)कार का उप; कर, (cid:4)कसी कूप,
पृथ(cid:4)कE, पेpोिलयम संaह टंक(cid:28) के तीस मीटर के भीतर नहq रखा जाएगा िसवाय वहाँ के जहाँ (cid:4)क cव ाला-(cid:20)कार के
ऐसे उप;क र को cव ाला (cid:20)aािहय(cid:16) से लसै (cid:4)कया गया ह।ै
(5) Gल ॉक(cid:16) या उ प ादन सिु वधाu के बीच पथृ कता अंतराल को OISD-STD-118 या इसके पनु रीि>त
सं;क रण या माEा म क जोिखम आकलन () यआू रए) पर आधा-रत म}ु य िनरी>क (cid:31)ारा िविनSदT ट (cid:4)कसी अ(cid:25) य मानक
वाल ेसामा(cid:25)य या िवशषे आदशे के अन(cid:21)ु प रखा जाएगा।
99997777.... अअअअिििि@@@@ ककककेेेे (cid:16)(cid:16)(cid:16)(cid:16)िििितततत पपपपववूूववूू ाााा**वव**ववधधधधााााििििननननययययाााा..ँँ..ँँ---- (1) (cid:4)कसी तले या गैस कूप या ƒधन टंक(cid:28) भंडारण >Eे से पं(cid:26)ह मीटर क(cid:28) दरू ी के
भीतर सूखी पि(cid:134)या ँया सूख ेवन;पित को एकE होन ेया रहने नहq (cid:4)दया जाएगा और 24 घंटे चौबीस अविध के भीतर
उपयोग के िलए अपिे >त सामaी स ेिभ(cid:25)न दा(cid:132) सामaी संaिहत नहq (cid:4)कया जाएगा।
(2) जहाँ (cid:4)कसी अ(cid:25)त दहO न इंजन को (cid:4)कसी कूप, पथृ (cid:4)कE, संaह टंक(cid:28) के तीस मीटर के भीतर अवि;थत (cid:4)कया
जाता ह ैवहा,ँ
(क) उसक(cid:28) िनवाOतक पाईप को रोधी या पयाORत (cid:21)प स ेठंडा (cid:4)कया जाएगा और िनवातO क पाईप के िसरे
का (cid:21)ख कूपशीष Oसे दरू होगा; और
(ख) उसके िनवाOतक ब%मुख को, ऐस े तरल या गसै (cid:16) स े जो अ(cid:25)य था उस पर िगरे, उसका संपकO रोकन े के
िलए प-ररि>त (cid:4)कया जाएगा।
(3) जहाँ कोई डीजल इंजन (cid:4)कसी कूप के तीस मीटर के भीतर अवि;थत (cid:4)कया जाता ह ै वहा ँ उसम8 सुगमता के
सुगम दरु ;थ िनयंEण क(cid:28) Aय व;थ ा सिहत वायु अंतaाही उप-िवरामक वॉ(cid:6) व क(cid:28) A यव; था क(cid:28) जाएगी।
(4) बनOर(cid:16) के दरू ;थ cव लन के िलए उपयु) त यिु " के साथ जल-उT मक pीटर और हीटर pीटर क(cid:28) A यव; था क(cid:28)
जाएगी।
(5) ;थ िै तक िवjुत चाजx के >य के िलए सभी संयEं , मशीनरी और ड-ै रक(cid:16) को (cid:20)भावी (cid:21)प स े भसू ंपSकत (cid:4)कया
जाएगा।
99998888.... हहहहॉॉॉॉटटटट ववववकककक****,,,, जजजजससैैससैै ेे ेेववववRRैैRRैैHHHHडडडडगगगग,,,, ककककततततनन**नन** ययययाााा ििििपपपपससससााााईईईई,,,, ककककेेेे ददददौौौौरररराााानननन पपपपववूूववूू ाााावव**वव** धधधधााााििििननननययययाााा..ँँ..ँँ---- (1) (cid:20)बंधक या सं; थापन (cid:20)बधं क (cid:31)ारा
िलिखत म8 स(cid:18)य क (cid:21)प स े (cid:20)ािधकृत (cid:4)कसी स>म वे(cid:6) डर से िभ(cid:25) न कोई A यि", c वाला या िवjुत वbे (cid:6)डग सािधE के
उपयोग क(cid:28) अपे>ा करने वाला वेb(cid:6)डग या कतनO का काम नहq करेगा।
(2) (cid:4)कसी वगlकृत जोिखमवाल े >Eे म8 (cid:4)कसी वे(cid:6) डर (cid:31)ारा कोई भी वैb(cid:6)डग या कतनO का काम हाथ म 8 तब तक
नहq िलया जाएगा जब तक (cid:4)क एक िलिखत परिमट, िजस े ''हॉट वकO प-रिमट'' कहा गया ह,ै इस (cid:20)योजन स े मु} य
िनरी>क (cid:31)ारा िविनSदTट (cid:20)(cid:21)पऔर प\ित म,8 (cid:20)बंधक, उप-(cid:20)बंधक या सं; थापन (cid:20)बधं क (cid:31)ारा वे(cid:6) डर या वे(cid:6) डर(cid:16) के
पयOवे>क को जारी नहq कर (cid:4)दया जाता ह ैऔर (cid:20) यके ऐस े प-रमट क(cid:28) (cid:20)ितया ँ सं; थापन पर अनुरि>त और उपलG ध
रखी जाएँगी।
(3) वह Aय ि" िजसने परिमट जारी (cid:4)कया हो, हॉट वकO के (cid:20)ारंभ स ेपूव,O हॉट वकO परिमट के साराशं को संबिं धत
वे(cid:6)ड र या वे(cid:6) डर(cid:16) को समझाएगा और इसक(cid:28) पुि(cid:128) ; व(cid:21)प उस पर उसके या उनका ह; ता>र लगे ा।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 41
(4) (cid:4)कसी जोिखम वाले >ेE म8 कोई भी वेb(cid:6)डग, कतनO या िपसाई जैसा कोई काम तब तक हाथ म8 नहq िलया
जाएगा जब तक (cid:4)क इस (cid:20)योजन के िलए (cid:20)ािधकृत (cid:4)कसी स>म Aय ि" (cid:31)ारा उस >ेE क(cid:28) स(cid:18)य क (cid:21)प से परी>ा नहq
कर ली जाती और वह >ेE गसै -मु)त नहq पाया जाता और (cid:20) य ेक ऐसी परी>ा क(cid:28) एक -रपोटO अिभिलिखत क(cid:28)
जाएगी और रखी जाएगी।
(5) वेb(cid:6)डग, कतनO या िपसाई जैस ेकायO क(cid:28) (cid:4)कसी भी स(cid:4)ं 5या के दौरान वे(cid:6)डर यह सुिनि(cid:147)त करेगा (cid:4)क -
(क) सभी cवलनशील सामaी, तेल, aीस, तेल िस)त न िम(cid:143)ी उस >Eे से हटा िलए गए ह;H
(ख) कोई (cid:4)दयासलाई, लाइटर या धू«पान सािधE या cवलनशील गैस को (cid:20)c विलत करने म8 समथ O
कोई अ(cid:25)य eोत उसके कायO ; थल पर या उसके आसपास मौजदू न ह(cid:16) :
पर(cid:25)त ,ु इस खंड म8 कुछ भी वbे (cid:6)डग टाचO को जलाने या पनु : जलाने के (cid:20)योजन के िलए कोई भी
उिचत उप;क र को (cid:20)योग से रोकना नहq माना जाएगा;
(ग) िचनगा-रय(cid:16), ;ल ैग या तR त धात ु (cid:31)ारा शु(cid:21) होनवे ाली आग को रोकन े के िलए पयाOR त
पूवाOवधािनया ँबरती गई ह;ै
(घ) पयाOI सं}या म 8उिचत(cid:20)कार के अि(cid:133)शामक यंE और अ(cid:25)य अि(cid:133)शमन rव;थाएँ कर ली गई ह Hऔर
उ(cid:25)ह 8त काल उपयोग के िलए सगु म उपलGध बनाया और रखा गया ह;ै
(ड.) जब स(cid:4)ं 5याएँ प-र(cid:21)\ ;थ ल पर चलाई जाती ह H तब cवलनशील गसै का सचं य रोकन े के िलए
यांिEक साधन(cid:16) (cid:31)ारा पयाOI संवातन क(cid:28) िनरंतर A यव; था ह;ै और
(च) जब सं(cid:4)5याएँ ऐसी पाईप लाइन पर चलाई जाती ह H िजसम8 cवलनशील तरल पदाथO ह,ै तब हॉट
वकO को हाथ म8 िलए जान े के पवू O पाईप को अलग कर (cid:4)दया जाता ह ै या बंद कर (cid:4)दया जाता है, लाइन को
सकारा म क (cid:21)प से िवमु)त कर (cid:4)दया जाता ह,ै उसे अ(cid:4)5य गैस या जल से प-रT कृत (cid:4)कया जाता ह,ै और जब
हॉट वकO चालू ह ैतब लाइन म8 बने दाब के (cid:20)ित यथोिचत पूवावO धािनयाँ बरती जाती ह ै:
पर(cid:25)त ,ु इस खंड म8 कुछ भी हॉट टैbपग मशीन का उपयोग चाल ू पाईप लाइन पर करन े स े िनषेध
नहq माना जाएगा, िजस े(cid:20)बंधक, उप-(cid:20)बंधक या सं; थापन (cid:20)बंधक के पूवO िलिखत अनु(cid:127)ा स ेक(cid:28) जा रही हो।
(6) सं;थापन (cid:20)बंधक या स>म rि" यह सिु नि(cid:147)त करेगा (cid:4)क जहाँ हॉट वकO के परिमट जारी (cid:4)कए गए हH, वहा ँ
वेb(cid:6)डग और कतOन स(cid:4)ं 5याएँ उ)त परिमट के अनसु ार चलाई जाती ह।H
99999999.... ववववffैैffैै ततुुततुु सससस++ंं++ंं थथ थथ ाााापपपपनननन???? ककककेेेे ििििललललएएएए ककककाााायययय--**--** (cid:16)(cid:16)(cid:16)(cid:16)णणणणााााललललीीीी ककककाााा पपपपररररििििममममटटटट....---- बड़़ ेवैjुत सं;थ ापन(cid:16) पर सम;त काय Oभारतीय मानक Gय ूरो के
मानक आई.एस. 5216 (भाग-।), या उसके संशोिधत सं; करण के अनुसार ''काय-O (cid:20)णाली हते ु परिमट'' के तहत ही
(cid:4)कया जाएगा।
111100000000.... अअअअिििि@@@@शशशशममममनननन उउउउपपपप++++कक कक रररर....---- (1) इन िविनयम(cid:16) के अधीन (cid:20)बधं (cid:4)कए गए अि(cid:133)शमन सिु वधाए ँ तले उjोग सुर>ा
िनदशे ालय मानक, OISD-STD-116, OISD-STD-117, OISD-STD-189 या उनके संशोिधत सं;क रण के
अनसु ार ह(cid:16)गे।
(2) (cid:20) य के वेधन और वकOओवर -रग पर, िन(cid:144)िलिखत अि(cid:133)शमन rव;थाu और उप; कर(cid:16) क(cid:28) A यव; था क(cid:28)
जाएगी, अथाOत ् -
(क) पयाOI जल भंडारण, पंप क(cid:28) सुिवधाए,ँ होज़ और टो-टया;ँ और
(ख) ड-े रक तल, मु}य इंजन >ेE, वैjुत मशीनरी, मड टंक(cid:28) >Eे , डीजल भंडारण >ेE और अ(cid:25)य
संवेदनशील ;थान(cid:16) पर पयाOI सं}या म 8समिु चत सुवाfiय अि(cid:133)शमन यंE ।
(3) (cid:20) य के उ प ादन सिु वधा पर वैस ेअि(cid:133)शमन A यव; थाए ँऔर उप; कर (cid:20)बंध (cid:4)कए जाएँगे जो उप-िविनयम (1)
के अधीन िविनSदTट मानक(cid:16) के अनु(cid:21)प ह(cid:16)।
(4) (cid:20) य के पेpोिलयम भंडारण टंक(cid:28) पर, पयाORत जल भडं ारण के साथ वाटर oरग मेन, पंप-पोषक हाइ[ट8 तथा
जल मॉनीटर क(cid:28) Aय व;थ ा क(cid:28) जाएगी।
(5) अचल फेन संबंधन(cid:16) सिहत अचल छत टं(cid:4)कय(cid:16) क(cid:28) A यव; था क(cid:28) जाएगी।42 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) (cid:4)5समस pी के साथ कूप शीष O >ेE सिहत सभी सं;थ ापन(cid:16) तक सुगम प%चँ होगी ता(cid:4)क बाहरी अि(cid:133)शमन
सहायता िबना बाधा के अ(cid:25)द र जा सके।
(7) आपात ि;थित म 8सब समय उपयोग के िलए पयाOI सं}या म 8फायर ट8डर या उप; कर सिु वधाजनक ; थान पर
सुगम उपलGध रख े जाएगँ े ।
(8) एक अि(cid:133)शमन अिधकारी तीन मास म 8 कम स े कम एक बार (cid:20) यके अि(cid:133)शामक यंE(cid:16) क(cid:28) परी>ा करेगा और
यह सुिनि(cid:147)त करने के िलए (cid:4)क वह चालू दशा म8 ह,ै िजतनी बार आवJ यक हो उतनी बार उस ेखाली करेगा और पुन:
भरेगा।
(9) इस िविनयम के अधीन हर ऐसी परी>ा या पुन: भरण क(cid:28) एक -रपोटO अि(cid:133)शमन अिधकारी (cid:31)ारा
अिभिलिखत क(cid:28) जाएगी और रखी जाएगी।
111100001111.... अअअअिििि@@@@शशशशााााममममकककक उउउउपपपप++++कक कक रररर ककककाााा उउउउपपपपययययोोोोगगगग....---- (cid:4)कसी वेधन -रग, वकOओवर -रग, उ पादन सिु वधा, कूप शीष O सं;थ ापन, संaह
टंक(cid:28) पर या ऐसे अ(cid:25)य सकं मO पर, जहाँ अि(cid:133)शामक उप; कर का उपयोग (cid:4)कया जाना अपेि>त हो, (cid:20) यके A यि" को
ऐसे उप;क र के (cid:20)योग के िलए (cid:20)िशि>त (cid:4)कया जाएगा और इस (cid:20)योजन के िलए िनयिमत अि(cid:133)शमन अ(cid:150)यास (cid:4)कया
जाएगा।
111100002222.... आआआआपपपपाााातततत ययययोोोोजजजजननननाााा....---- (1) (cid:20) य ेक खान का (cid:20)बंधक, (cid:4)कसी आपात क(cid:28) ि;थित म8 कायाO(cid:25) वयन के िलए एक आपात
योजना तैयार करेगा और वह उसक(cid:28) एक-एक (cid:20)ित >ेEीय िनरी>क और िजला मिज;pेट को (cid:20); ततु करेगा ।
(2) आपात योजना, खान क(cid:28) िन(cid:18)न िलिखत गितिविधय(cid:16) के जोिखम आकलन करन े के पJ चात ् तैयार (cid:4)कया
जाएगा :
(क) आग;
(ख) Gल ो-आउट, िव;फोट, (cid:20)cवलन, cवलनशील या हािनकारक गसै (cid:16) का अ(cid:25) तवाOह;
(ग) उप;क र या पाईप लाइन का फटना या पेpोिलयम का अिनयिं Eत िनकलना;
(घ) संरचनाu क(cid:28) िवफलता;
(ड.) रासायिनक छलकाव;
(च) (cid:20)ाकृितक आपदाए;ं
(छ) िच(cid:4)क सीय श(cid:25)ू य ीकरण; और
(ज) कोई अ(cid:25)य आपात।
(3) आपात योजना म8 िन(cid:18)न िलिखत ह(cid:16)गे -
(क) (cid:4)कसी बड़ी दघु टO ना घटन े क(cid:28) दशा म8 क(cid:28) जान े वाली कारOवाईया,ँ िजसम 8 यह भी शािमल होगा (cid:4)क
उ)त कारOवाईय(cid:16) को कब और कैस े(cid:4)कया जाना ह;ै
(ख) िनयंEण प\ित और आपात ि;थितय(cid:16) क(cid:28) दशा म8 अ(cid:25)त बOिलत (cid:20) यके A यि" के उ तरदािय व ; पT ट
(cid:21)प से बताते %ए संगठन योजना;
(ग) उपकरण योजना अथाOत, (cid:20) यके उप; कर के संबंध म 8 मके , (cid:20)कार, >मता, अव; थान, (cid:20)चालन >ेE
और (cid:20)चालन कायO(cid:20)णाली; और
(घ) आपात के (cid:4)कसी िवशेष मामल े म 8 उठाए जान े वाल े कदम(cid:16) क(cid:28) स}ं य ा को िविनSद(cid:128) करती %ई
रणनीितक योजना ।
(4) आपात योजना िन(cid:18)न िलिखत को ; पT टत: बताएगा -
(क) अलामO और संचार (cid:20)णाली;
(ख) अिधका-रय(cid:16) को अिधसूिचत करने क(cid:28) (cid:20)णाली;
(ग) (cid:20) यके (cid:20)मुख कमl के कतOr(cid:16) और िज(cid:18)मेदा-रय(cid:16) के साथ साथ आपात ि;थित के असर को टालन ेया
कम करने के िलए अपनाए जान ेवाल ेउपाय;
(घ) कब और कैस ेउप; कर(cid:16) का उपयोग (cid:4)कया जाएगा तथा कब और कैस ेकारOवाई क(cid:28) जाएगी;¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 43
(ड.) सरकारी एजि8 सय(cid:16) सिहत संब\ और बाहरी एजि8 सय(cid:16) से उपलGध होने वाली सहायता या
जानकारी;
(च) कारOवाई को समाI करन ेके िलए माग-O दशOन; और
(छ) कzमय(cid:16) के (cid:20)िश>ण और बनावटी अ(cid:150)यास के िलए योजना।
(5) (cid:20) य के खान का (cid:20)बंधक यह सुिनि(cid:147)त करेगा (cid:4)क -
(क) आपात योजना के अनुपालन के िलए सं; थापन पर (cid:20)बंध (cid:4)कए गए सभी उप; कर द(cid:21)ु ; त एव ं द>
चाल ूहालत म 8िवflसनीय ि;थित म8 रखे गए ह;H और
(ख) सभी आपात उप;क र(cid:16) क(cid:28) (cid:4)कसी ; वतंE स>म A यि" (cid:31)ारा A यवि;थत परी>ा हते ु एक िलिख त
योजना तैयार कर ली गई ह;ै
(6) (cid:20) य के खान का (cid:20)बंधक उस परी>ा क(cid:28) (cid:20)कृित और आविृ त को िविनSदT ट करेगा, जो सं; थापन के उप; कर
का (cid:20)थम उपयोग करन ेस ेपूवO तथा (cid:4)कसी सशं ोधन या मर(cid:18)मत के पJ चात भी, क(cid:28) जा सकती ह।ै
(7) (cid:20) य के खान का (cid:20)बंधक आपात योजना क(cid:28), आविधक (cid:21)प स,े और िवशेष तौर पर (cid:4)कसी भी प-रवतOन के
िनTप ादन से पूव,O समी>ा एवं संशोधन करेगा और उसक(cid:28) एक (cid:20)ित >ेEीय िनरी>क को (cid:20); तुत करेगा।
अअअअ(cid:15)(cid:15)(cid:15)(cid:15)ययययाााायययय –––– 9999
ममममशशशशीीीीननननररररीीीी,,,, ससससययंंययंं (cid:11)(cid:11)ंं(cid:11)(cid:11)ंं औऔऔऔरररर उउउउपपपप++++कक कक रररर
111100003333.... ककककुुुुछछछछ ममममशशशशीीीीननननररररीीीी औऔऔऔरररर उउउउपपपप++++ककककरररर ककककाााा उउउउपपपपययययोोोोगगगग....---- (1) (cid:20) यके खान के ; वामी, अिभकताO एवं (cid:20)बंधक यह सिु नि(cid:147)त कर8गे (cid:4)क
ऐसे सािधE(cid:16), उप;क र, मशीनरी या अ(cid:25) य सामaी िजनका उपयोग खान म 8 (cid:4)कया जाता ह ै या (cid:4)कया जा सकता ह,ै वे
मजबूत बनावट के ह H और वैस े ही (cid:20)कार एवं िविनदशw न के ह H जो इस (cid:20)योजन के िलए अिभ(cid:127)ात (cid:4)कए गए (cid:4)कसी
भारतीय या अतं राOTp ीय मानक के अन(cid:21)ु प हो :
पर(cid:25)त ,ु ऐसे सािधE(cid:16), उप;क र, मशीनरी या अ(cid:25)य साम aी का उपयोग खान म8 तभी (cid:4)कया जाएगा, जब वे
उपरो)त अनु(cid:20)योcय मानक(cid:16) के अनसु ार परीि>त (cid:4)कए गए ह(cid:16) और परी>ण(cid:16) म 8पास हो चकु े ह(cid:16) और (cid:20)बंधक ने उनके
(cid:20)कार, िविनदशw न(cid:16) के िववरण, उन खास मानक(cid:16) के िनदwश, उन मानक(cid:16) के अनुसार परी>ण के मापदडं एवं परी>ण
क(cid:28) ि;थित, परी>ण के ;थ ान, परी>ण -रपोटO या -रपोटx क(cid:28) (cid:20)ितय(cid:16) और (cid:4)क(cid:25) हq अ(cid:25) य ससु ंगत िववरण(cid:16) का एक
-रकॉड Oरख चकु ा हो; अ(cid:25)य था नहq।
(2) सािधE(cid:16), उप;क र, मशीनरी एवं अ(cid:25) य सामिaय(cid:16) के िलए A यवहार सिं हता और मानक (cid:20)चालन काय O
(cid:20)णािलय(cid:16) का भी अनपु ालन (cid:4)कया जाएगा।
111100004444.... ममममोोोोबबबबााााइइइइलललल VVVVेेेेनननन ककककाााा उउउउपपपपययययोोोोगगगग....---- (1) खान(cid:16) म8 मोबाइल 5ेन का उपयोग उसक(cid:28) िनधा-O रत >मता स े अिधक भार
उठान ेके िलए नहq (cid:4)कया जाएगा ।
(2) खान(cid:16) म8 उपयोग (cid:4)कए जानेवाल ेमोबाईल 5ेन(cid:16) के साथ िन(cid:18) निलिखत (cid:20)बंध ह(cid:16)गे –
(क) ओवरलोड होन ेपर चेतावनी दने े के िलए एक सरु ि>त भार सचू क;
(ख) कायO करने के उपयु)त सरु ि>त भार और िEc या को िनSदT ट करने के िलए एक भार िEc या सचू क,
जो 5ेन (cid:20)चालक को ;प Tट (cid:21)प से दJृ य हो;
(ग) होयb;टग, b;वbगग और बूम के फैलाव को सीिमत करन े के िलए उ त ोलन, दोलन और बूम के
िव;त ारण को सीिमत करने के िलए गित प-रसीमक यिु "या;ँ और
(घ) एक (cid:20)भावी NAय -दJृ य अलाम Oजो 5ेन के पीछे जान ेक(cid:28) ि;थित म 8; वत: स(cid:4)5ियत होगा।
(3) सभं ाला जानेवाला भार ;प T ट (cid:21)प स े 5ेन (cid:20)चालक को (cid:4)दखगे ा और जहाँ ऐसा करना A यवहा-रक नहq ह ै
वहाँ (cid:20)चालन हते ु सकं ेत दने ेके िलए एक उपय)ु त सकं ेतक (cid:20)णाली क(cid:28) A यव;थ ा क(cid:28) जाएगी।
(4) मोबाइल 5ेन के साथ िसफO ऐसा b;लग ही उपयोग म 8 लाया जाएगा जो भारतीय मानक G यरू ो के आई एस
2762 या इसके संशोिधत सं;क रण के अनुसार हो।44 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(5) खान(cid:16) म8 मोबाईल 5ेन को (cid:20)चािलत करन े के िलए िसफO स>म और (cid:20)िशि>त 5ेन (cid:20)चालक को ही अनमु ित
दी जाएगी।
(6) मोबाईल 5ेन क(cid:28) परी>ा (cid:4)कसी स>म Aय ि" (cid:31)ारा ऐसे अंतराल पर तथा ऐसी (cid:4)5यािविध के अनुसार क(cid:28)
जाएगी जसै ा (cid:20)बंधक या उप-(cid:20)बंधक अिधकिथत करे और िनरी>ण के प-रणाम(cid:16) को िनरी>ण करन े वाले A यि" के
(cid:31)ारा अिभिलिखत क(cid:28) जाएगी।
111100005555.... उउउउ2222थथथ थ ाााापपपपकककक ससससााााििििधधधध(cid:11)(cid:11)(cid:11)(cid:11) औऔऔऔरररर ििििगगगगययययरररर....---- (1) खान(cid:16) म8 उपयोग के िलए आशियत उ थ ापक सािधE और िगयर (cid:20)णाली
समुिचत (cid:21)प से अनुरि>त और (cid:20)चािलत (cid:4)कए जाएँगे ता(cid:4)क Aय ि"य(cid:16) क(cid:28) सुर>ा सिु नि(cid:147)त हो।
(2) खान(cid:16) म 8उ थ ापक सािधE(cid:16) और िगयर(cid:16) के (cid:20)चालन हते ु (cid:20)ािधकृत स>म rि" यह सुिनि(cid:147)त करेगा (cid:4)क -
(क) उ थ ापक सािधE(cid:16), िगयर और रि;सय(cid:16) के िडजाइन, बनावट और सं;थ ापन, म}ु य िनरी>क (cid:31)ारा
(cid:4)कसी सामा(cid:25)य या िवशषे िलिखत आदशे म8 िविनSदT ट मानक के अनु(cid:21)प ह H; और
(ख) सािधE(cid:16) और िगयर(cid:16) का चयन उस (cid:20)योजन के िलए उपय)ु त ह ै िजसके िलए उ(cid:25) ह 8 उपयोग (cid:4)कया
जाना आशियत ह ैऔर उसक(cid:28) िनधाO-रत >मता के िलए भार परी>ण भी (cid:4)कया जाएगा।
(3) (cid:4)कसी Aय ि" को खान(cid:16) म8 उ थ ापक सािधE(cid:16) और िगयर(cid:16) के (cid:20)चालन के िलए लगाने से पवू O उसे कायO स े
संबंिधत (cid:20)िश>ण (cid:4)दया जाएगा।
111100006666.... जजजजोोोोििििखखखखममममममममयययय (cid:22)(cid:22)(cid:22)(cid:22)(cid:11)(cid:11)ेे(cid:11)(cid:11)ेे ककककाााा ववववगगगगggggककककररररणणणण....---- (1) तले खान(cid:16) म8 जोिखममय >ेE को, जैसा अनुसूची म 8 िविनSदT ट ह,ै िविभ(cid:25)न
जोन(cid:16) म 8वगlकृत (cid:4)कया जाएगा।
(2) (cid:20) य के खान का (cid:20)बंधक यह सुिनि(cid:147)त करेगा (cid:4)क –
(क) एक रेखाकं , जो िविनयम 9 के उप-िविनयम (1) के खडं (ख) के अधीन यथापिे>त उ(cid:25)ह q
िविशTट ताu को (cid:20)दzशत करे और साथ ही खान के जोिखममय जोन(cid:16) के िविभ(cid:25) न वगx, जैसा (cid:4)क उप-िविनयम (1) के
अधीन वगlकृत ह,ै को भी सु;प Tट कलर वाश म8 (cid:20)दzशत करे, का रख-रखाव (cid:4)कया जाता ह;ै
(ख) जोन(cid:16) के िविभ(cid:25)न वगx को उपयु) त सूचना प(cid:143)(cid:16) या अ(cid:25) य (cid:20)ाभावकारी साधन (cid:31)ारा >ेE म 8 सही
;थ ान पर सु;प Tट (cid:21)प म 8िचि(cid:25)हत (cid:4)कया गया ह;ै और
(ग) खान म8 िनयोिजत सभी A यि"य(cid:16) को िविभ(cid:25) न वगlकृत जोिखममय जोन(cid:16) क(cid:28) दशा म 8स(cid:18)ब \ खतर(cid:16)
और उनसे िनपटने हते ुली जानवे ाली सावधािनय(cid:16) से अवगत कराया गया ह।ै
111100007777.... जजजजोोोोििििखखखखममममममममयययय (cid:22)(cid:22)(cid:22)(cid:22)(cid:11)(cid:11)ेे(cid:11)(cid:11)ेे मममम 33 33ििििववववffffततुुततुु उउउउपपपप++++कक कक रररर ककककाााा उउउउपपपपययययोोोोगगगग....---- (1) जोन ‘0’जोिखममय >ेE म8 (cid:4)कसी िवjुत सािधE, उप;क र या
मशीनरी, िजसम8 (cid:20)काश का उपकरण भी शािमल ह,ै का उपयोग नहq (cid:4)कया जाएगा।
(2) (cid:20) य के खान के ;व ामी, अिभकताO और (cid:20)बंधक यह सिु नि(cid:147)त कर8गे (cid:4)क ऐसे वैjुत सािधE(cid:16), उप;क र,
मशीनरी या अ(cid:25)य सामaी, िजनका उपयोग खान के जोन-1 या जोन -2 जोिखममय >ेE म 8 (cid:4)कया जाता ह ै या (cid:4)कया
जा सकता ह,ै वे वैसे ही (cid:20)कार एवं िविनदशw न के ह H जो इस (cid:20)योजन के िलए अिभ(cid:127)ात (cid:4)कए गए (cid:4)कसी भारतीय या
अंतराOTp ीय मानक के अनु(cid:21)प ह(cid:16) :
पर(cid:25)त ,ु ऐस े सािधE(cid:16), उप;क र, मशीनरी या अ(cid:25) य सामaी का उपयोग खान के जोन ''1'' और जोन ''2''
जोिखममय >ेE म 8 तभी (cid:4)कया जाएगा, जब व े उपरो)त अन(cid:20)ु योc य मानक(cid:16) के अनसु ार परीि>त (cid:4)कए गए ह(cid:16) और
परी>ण(cid:16) म 8 पास हो चकु े ह(cid:16) और (cid:20)बंधक ने उनके (cid:20)कार, िविनदशw न(cid:16) के िववरण, उन खास मानक(cid:16) के सदं भ,O उन
मानक(cid:16) के अनुसार परी>ण के मापदडं एवं परी>ण क(cid:28) ि;थित, परी>ण के ;थ ान, परी>ण -रपोटO या -रपोटx क(cid:28)
(cid:20)ितय(cid:16) और (cid:4)क(cid:25)ह q अ(cid:25)य सुसंगत िववरण(cid:16) का एक -रकॉड Oरख चुका हो, अ(cid:25)य था नहq।
111100008888.... ममममशशशशीीीीननननररररीीीी कककक---- बबबबननननााााववववटटटट औऔऔऔरररर बबबबननननााााएएएए ररररखखखखनननन ेे ेे ककककेेेे बबबबााााररररेेेे मममम 33 33 ससससााााधधधधााााररररणणणण उउउउपपपपबबंंबबंं धधधध....---- ऐसी सभी मशीनरी और सािधE के, िजनका
(cid:4)कसी खान के उप;क र के (cid:21)प म 8 या उसके भाग (cid:21)प म 8उपयोग (cid:4)कया जाता ह,ै सभी ऐस े पजु w और चाल ूिगयर, चाह े
वे अचल ह(cid:16) या चल, िजनके अ(cid:25)त गOत सलं ागी भी ह,H और ऐस ेसभी आधार, िजनम8 या िजनस े(cid:4)क(cid:25) हq ऐसे सािधE(cid:16) को
जकड़ा या ब\ (cid:4)कया जाता ह,ै ठोस बनावट, उपयु) त सामaी, पयाOR त मजबूती के और (cid:20) य>त: E-ु ट से मु) त ह(cid:16)ग े
और उ(cid:25)ह 8समिु चत (cid:21)प से बनाए रखा जाएगा।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 45
111100009999.... ररररखखखख----ररररखखखखाााावववव (cid:16)(cid:16)(cid:16)(cid:16)णणणणााााललललीीीी....---- (1) खान म 8 सभी मशीनरी एव ं उप; कर एक द> चाल ू दशा म 8 अनुरि>त (cid:4)कए जाएगँ े और
अ(cid:130)छ े मर(cid:18)म त क(cid:28) हालत म 8रख ेजाएगँ ।े
(2) (cid:20) य के खान का (cid:20)बंधक यह सिु नि(cid:147)त करेगा (cid:4)क मशीनरी और उप; कर के रख-रखाव के िलए एक
कायO(cid:20)णाली ;थ ािपत क(cid:28) गई ह।ै
(3) उप-िविनयम (2) म8 िनSदTट कायO(cid:20)णाली -
(क) परी>ा क(cid:28) (cid:20)कृित और आवृित को िविनSदT ट करेगा; और
(ख) मशीनरी और उप; कर क(cid:28), सं;थ ापन म 8 (cid:20)थम उपयोग से पूवO और बड़े संशोधन या मर(cid:18)म त के
पJच ात भी, जहा ँउपयु)त हो, (cid:4)कए जान ेवाल ेपरी>ा क(cid:28) A यव; था करेगा।
(4) उप-िविनयम (3) म 8 िनSद(cid:128) परी>ा से मशीनरी और उप; कर का, चाह े सेवा म8 या सवे ा स े बाहर रहत े %ए,
उपयु)त तकनीक(cid:16) का उपयोग करते %ए िववेचना म क संवी>ण अिभ(cid:20)ेत होगा, िजसके अतं गOत िन(cid:18)न िलिखत के िलए
परी>ण भी ह(cid:16)ग े-
(क) उस (cid:20)योजन, िजसके िलए उ(cid:25) ह 8 उपयोग म 8 लाया जाना ह,ै के िलए उसक(cid:28) उपयु"ता का आकलन
करने के िलए;
(ख) उसक(cid:28) वा;तिवक ि;थित का आकलन करन ेके िलए; और
(ग) (cid:4)क(cid:25)ह q उपचारा मक उपाय(cid:16) का िनधारO ण करने के िलए ।
(5) इस िविनयम के अधीन ;थािपत कायO(cid:20)णाली म8 अिभ (cid:127)ात उपचारा मक उपाय(cid:16) के कायाO(cid:25)वयन के िलए एक
योजना शािमल होगी ।
(6) सभी मापक उपकरण(cid:16), मीटर(cid:16) एव ं -रलीफ वॉ(cid:6) व(cid:16) को िविनमातO ाu (cid:31)ारा िविनSद(cid:128) अंतराल(cid:16) पर
अंशशोिधत (cid:4)कया जाएगा ।
111111110000.... अअअअततंंततंं ददददहह**हह** नननन इइइइंंंंजजजजनननन....---- (1) तीस अJव शि" से अिधक अ(cid:25) तदOहन इंजन(cid:16) को चालू करने के िलए उनम 8 करंचल स े िभ(cid:25)न
साधन(cid:16) क(cid:28) Aय व;थ ा क(cid:28) जाएगी :
पर(cid:25)त ,ु इस उप-िविनयम म 8 (cid:4)कसी बात के होत े %ए भी यह नहq समझा जाएगा (cid:4)क (cid:4)कसी आपात ि;थित म 8
हाथ से चाल ूकरने को (cid:20)ितिष\ (cid:4)कया गया ह।ै
(2) जहाँ इंजन को चाल ूकरन ेके िलए संपीि़डत वायु का उपयोग (cid:4)कया जाता ह ैवहा ँजहाँ तक हो सके, इंजन के
िनकट स(cid:18)प ीि़डत वायु लाइन म 8एक अ(cid:20) यावतOन वॉ(cid:6) व क(cid:28) A यव; था क(cid:28) जाएगी।
(3) इंजन क(cid:28) िनवाOतक प\ित म8 िनवाOतक से होने वाली खुली cव ाला और bचगा-रय(cid:16) को रोकने के िलए एक
उपयु)त युि" क(cid:28) Aय व;थ ा क(cid:28) जाएगी।
(4) अ(cid:25)त दहO न इंजन के पास cव लनशील वाT प के इकmा होन े स े रोकन े के िलए पयाRO त पूवाOवधािनयाँ बरती
जाएँगी।
(5) (cid:4)कसी अ(cid:25)त दहO न इंजन म 8 िवjुत अवसाधन के(cid:25)(cid:26) ीय िवjुत (cid:20)ािधकरण (सरु >ा एवं िवjतु आपूzत सबं ंिधत
उपाय) िविनयम, 2010 के उपबंध(cid:16) का अनुपालन कर8गे।
111111111111.... ददददााााबबबब ककककेेेे अअअअधधधधीीीीनननन ससससााााििििधधधध(cid:11)(cid:11)(cid:11)(cid:11)....---- (1) (cid:20) य के खान का (cid:20)बंध यह सिु नि(cid:147)त करेगा (cid:4)क दाब के अधीन के सािधE(cid:16) के (cid:20)चालन
और रख-रखाव के िलए तले उjोग सुर>ा िनदशे ालय के मानक, OISD-STD-128 या उसके संशोिध त सं; करण का
अनसु रण (cid:4)कया जाता ह।ै
(2) खान के उप;क र के (cid:21)प म 8 या उसके भाग(cid:21)प (cid:20)यु) त ऐसे सब सािधE िजसम8 वायमु (cid:141) डलीय दाब से अिधक
दाब पर वाय,ु गैस, पेpोिलयम या वाT प ह,ै या जो उसका उ प ादन करता ह ै इस (cid:20)कार सि›zमत, सं; थािपत और
अनुरि>त (cid:4)कए जाएगँ े (cid:4)क आग, फट जान,े िव; फोट या बैठ जाने या िवषैली गसै (cid:16) के उ पादन का कोई जोिखम न हो।
(3) (cid:20) य के वाय-ु aाही या कंटेनर या िवभाजक िजसका उपयोग दाब के अधीन पेpोिलयम या गसै या वाT प के
भंडारण के िलए (cid:4)कया जाता ह,ै म 8 एक सरु >ा वॉ(cid:6) व और दाब मापने क(cid:28) युि", जो वायमु ंडलीय दाब स े अिधक दाब
दशातO ा ह,ै लगाए जाएगँ े।
(4) (cid:4)कसी वाय-ु aाही को या पेpोिलयम या गैस या वाT प से िनिहत (cid:4)कसी कंटेनर को केस म 8 (cid:4)कए जाने या चालू
करने के पूवO, एक स>म Aय ि", अिधकतम अन(cid:127)ु ेय कायकO रण दाब से कम से कम डढ़े गुणा दाब पर, उसका46 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
हाइ[ोिलक परी>ण करेगा और इसी (cid:20)कार का परी>ण (cid:20) यके नवीकरण या मर(cid:18) मत के पJ चात और, (cid:4)कसी भी दशा
म8, पाँच वषO से अनिधक अंतराल(cid:16) पर या उससे कम के ऐसे अतं राल(cid:16) पर जैसा >ेEीय िनरी>क अपिे >त करे, (cid:4)कया
जाएगा और ऐसे (cid:20) य ेक परी>ण के प-रणाम(cid:16) को उस स>म A यि" (cid:31)ारा अिभिलिखत क(cid:28) जाएगी िजसन े परी>ण
(cid:4)कया ह ैऔर उसे (cid:20)बंधक, उप-(cid:20)बंधक या सं; थापन (cid:20)बधं क (cid:31)ारा तारीख के साथ (cid:20)ित-ह; ता>-रत (cid:4)कया जाएगा।
(5) (cid:4)कसी भी दाब उपकरण क(cid:28) िवसजOन लाईन के साथ दाब िनमvचन सुर>ा युि" क(cid:28) Aय व; था क(cid:28) जाएगी।
(6) दाब उपकरण और दाब िनमvचन सरु >ा यिु " के बीच या यिु " और िवसजनO िव(cid:25) द ुके बीच कोई वा(cid:6) व या
(cid:4)फoटग नहq होगी, िजसस े(cid:4)क युि" अ(cid:20)भावी हो जाए।
(7) दाब िनमvचन सरु >ा यिु " को अिधकतम अन(cid:127)ु ेय कायकO रण दाब के उपर अिधक से अिधक दस (cid:20)ितशत
दाब पर खलु ने के िलए िनयत (cid:4)कया जाएगा।
(8) दाब िनमvचन सरु >ा यिु " का साल म8 कम से कम एक बार परी>ण और अशं शोधन (cid:4)कया जाएगा और ऐस े
परी>ण और अंशशोधन का -रकॉड Oखान म 8अनुरि>त (cid:4)कया जाएगा।
(9) (cid:4)कसी संपीडक स े संब\ (cid:20) यके आगमी गसै लाइन के साथ सपं ीडक शेड के बाहर (cid:4)कसी सुरि>त अ(cid:25) तराल
पर एक उपिवराम वॉ(cid:6)व क(cid:28) Aय व;थ ा क(cid:28) जाएगी।
(10) (cid:4)कसी गैस संपीडक और पाईप लाइन(cid:16) तथा उनसे संब\ (cid:4)फoटग(cid:16) क(cid:28) बाबत कोई भी मर(cid:18) मत कायO तब तक
हाथ म 8 नहq िलया जाएगा जब तक (cid:4)क (cid:20)वेश और िवसजOन लाइन(cid:16) को ब(cid:25) द और मजबतू ी से अिभब\ नहq कर िलया
जाता।
111111112222.... ममममशशशशीीीीननननररररीीीी ककककेेेे गगगगििििततततममममाााानननन भभभभाााागगगग???? ककककेेेे बबबबााााररररेे ेे मममम 33 33पपपपववूूववूू ाााावव**वव** धधधधााााििििननननययययाााा..ँँ..ँँ---- (1) (cid:20) यके bवच म8 रोकने के कोई िवरामक दतं रोधक या
अ(cid:25)य िवJव सनीय उपकरण लगाया जाएगा और उसको लगाने पर उसका उपयोग (cid:4)कया जाएगा।
(2) (cid:20) य के गितपालकच5 और खान के उप; कर के (cid:21)प म 8 उपयोग होन े वाली या ऐस े उप;क र क(cid:28) भाग (cid:21)प
(cid:4)कसी मशीनरी का (cid:20) य के अ(cid:25)य खतरनाक अनावृत भाग, खतरे को रोकन ेके िलए प)क े बने यथोिचत र>ा साधन(cid:16) स े
पयाORत (cid:21)प से बाड़ लगाकर सरु ि>त (cid:4)कया जाएगा और ऐस े र>ा साधन जब मशीनरी के भाग गितमान या उपयोग
म8 ह(cid:16) तब अपने ;थ ान(cid:16) पर रखे रहग8 े, (cid:4)क(cid:25) तु कोई परी>ा, समायोजन या मर(cid:18)म त करन े के िलए वे यथोिचत
पूवाOवधािनया ँबरत कर हटाए जा सक8गे।
(3) जहाँ >ित क(cid:28) जोिखम हो, वहाँ (cid:4)कसी भी A यि" को गितमान मशीनरी क(cid:28) मर(cid:18)म त, समायोजन, सफाई या
;न ेहन करन ेक(cid:28) अनु(cid:127)ा नहq दी जाएगी।
(4) जब तक उस (cid:20)योजन के िलए एक उपयु)त य(cid:176)िEक सािधE क(cid:28) A यव; था नहq क(cid:28) जाती (cid:4)कसी भी A यि"
को, जब मशीनरी गितमान ह,ै (cid:4)कसी चालक बे(cid:6) ट, चेन या र; से को हटाने या समायोजन करन े क(cid:28) अन(cid:127)ु ा नहq दी
जाएगी।
(5) कोई भी Aय ि" गितमान मशीनरी के िब(cid:6) कुल समीप ढीले वा(cid:132) व; E नहq पहनेगा और न ही उसे ढ़ीले बा(cid:132)
व;E पहनन ेक(cid:28) अनु(cid:127)ा दी जाएगी।
(6) (cid:4)कसी अ(cid:20)ािधकृत Aय ि" को (cid:4)कसी इंजन क>, िजसम 8गैस टबाइO न, संपीड़क या अ(cid:25) य मशीन >Eे भी शािमल
ह,ै म 8(cid:20)वेश या मशीनरी के साथ (cid:4)कसी (cid:20)कार क(cid:28) छेड़छाड़ करने क(cid:28) अनु(cid:127)ा नहq दी जाएगी।
111111113333.... इइइइंंंंजजजजनननन कककक(cid:22)(cid:22)(cid:22)(cid:22) औऔऔऔरररर उउउउननननककककेेेे ििििननननककककाााासससस....---- (1) (cid:20) यके इंजन, मोटर, संपीड़क, टबाOइन और पंप क>, और ऐसा (cid:20) यके क>
िजसम 8 अितcवलनशील सामaी का संचयन (cid:4)कया जाता ह,ै उसे ;व (cid:130) छ रखा जाएगा और उसम8 कम से कम दो
िनकास(cid:16) क(cid:28) Aय व;थ ा क(cid:28) जाएगी।
(2) (cid:20) य के िनकास को ;प(cid:128) (cid:21)प स े िचि(cid:25)हत (cid:4)कया जाएगा, उिचत (cid:21)प स े अनरु ि>त (cid:4)कया जाएगा और बाधा
मु" रखा जाएगा।
111111114444.... ममममशशशशीीीीननननररररीीीी ककककाााा चचचचााााललललनननन औऔऔऔरररर उउउउससससकककक---- पपपपररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)ाााा....---- (1) कोई भी मशीनरी (cid:4)कसी स>म rि" (cid:31)ारा या उसके सतत
पयOवे>ण के अधीन ही चलाई जाएगी, अ(cid:25)य था नहq।
(2) (cid:4)कसी मशीनरी, सािधE या साधन का भारसाधक (cid:20) य ेक A यि", काय Oआरंभ करन ेस ेपूव Oयह सिु नि(cid:147)त कर
लेगा (cid:4)क वह यथोिचत चाल ू हालत म8 ह ैऔर य(cid:4)द वह उसम8 कोई Eु-ट पाता ह ैतो वह इस त(cid:129)य क(cid:28) सं; थापन (cid:20)बंधक
या अ(cid:25)य स>म Aय ि" को तरु (cid:25)त -रपोटO दगे ा।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 47
(3) वायु-aाही का भारसाधक (cid:20) यके A यि" यह दखे ेगा (cid:4)क सरु >ा वॉ(cid:6) व(cid:16) म8 कोई अित-र) त भार नहq बढ़ाया
जाता ह ैऔर वायु का दाब अन(cid:127)ु ेय दाब से अिधक नहq हो जाता ह।ै
(4) इस (cid:20)योजन के िलए िनयु) त (cid:4)कया गया कोई स>म Aय ि" या िनयु) त (cid:4)कए गए A यि", उपयोग म 8 आन े
वाली सभी मशीनरी और संयEं का पूणतO : िनरी>ण हर सात (cid:4)दन म8 कम से कम एक बार करेगा/कर8गे और उसके
प-रणाम को अिभिलिखत करेगा/कर8गे।
(5) वैjुत मशीनरी और संयंE क(cid:28) बावत, स>म Aय ि" कोई ऐसा A यि" होगा िजसके पास के(cid:25) (cid:26)ीय िवjतु
(cid:20)ािधकरण (सुर>ा एवं िवjुत आपzू त संबंिधत उपाय) िविनयम, 2010 म8 िविनSदT ट अहतO ाए ँह(cid:16)।
अअअअ(cid:15)(cid:15)(cid:15)(cid:15)ययययाााायययय---- 11110000
ससससााााधधधधााााररररणणणण ससससररुुररुु (cid:22)(cid:22)(cid:22)(cid:22)ाााा उउउउपपपपबबबबधधंंधधंं
111111115555.... >>>>यय यय ववववहहहहाााारररर ससससििंंििंंहहहहतततताााा....---- (1) (cid:20) य के खान का (cid:20)बधं क (cid:4)कसी मशीनरी या अपने खान से सबं ंिधत (cid:4)कसी नई स(cid:4)ं 5या को
सि›िवTट करने स े पूवO, यथाि;थित, (cid:20) य के ऐस े मशीनरी या सं(cid:4)5या के िलए ‘’A यवहार सिं हता’’ बनाएगा खान म 8
लाग ूकरेगा जो अिधिनयम या इन िविनयम(cid:16) के असंगत नहq होगा।
(2) Aय वहार सिं हता मशीनरी के (cid:20)कार, आकार और >मता या Aय वfiत स(cid:4)ं 5या और मौजदू ; थानीय दशाu को
‘य ान म 8 रखत े %ए बनाई जाएगी तथा इसक(cid:28) एक (cid:20)ित >ेEीय िनरी>क को (cid:20); तुत क(cid:28) जाएगी जो (cid:4)कसी भी समय
िलिखत आदशे (cid:31)ारा ऐसे सिं हता म 8ऐसे (cid:4)कसी बदलाव क(cid:28) अप>े ा कर सकेगा जो वह उसम8 िविनSदT ट करे :
पर(cid:25)त ,ु ऐसी खान(cid:16) म8 जहा ँ पर इस (cid:20)कार क(cid:28) मशीनरी पहले से ही उपयोग म8 लाई जा रही ह(cid:16) या स(cid:4)ं 5या
पहले से ही Aय वहार म 8लाई जा रही हो वहाँ इन िविनयम(cid:16) के (cid:20)भावी होने क(cid:28) तारीख से नG बे (cid:4)दन(cid:16) के भीतर पूवv)त
Aय वहार सिं हता को बनाकर लागू (cid:4)कया जाएगा।
(3) Aय वहार संिहता म 8अ(cid:25)य बात(cid:16) के साथ-साथ िन(cid:18) निलिखत बात8 सि(cid:18)मिलत ह(cid:16)गी -
(क) संबिं धत मशीनरी या स(cid:4)ं 5या के िलए सरु ि>त (cid:20)चालन िविध;
(ख) मशीनरी के सं;थ ापन, पुनस(cid:159); थापन, (cid:21)पा(cid:25)त रण, बदलाव या मर(cid:18)म त के बाद (cid:20)थम उपयोग स े पूवO परी>ण
और जाँच;
(ग) मशीन के सुरि>त (cid:20)चालन को सिु नि(cid:147)त करने के िलए इसके उपांग(cid:16) समेत मशीन क(cid:28) परी>ण और जाँच का
काय-O 5म तथा उनक(cid:28) (cid:20)कृित; और
(घ) जाचँ क(cid:28) अिभलेख(cid:16) को रखने का तरीका।
(4) (cid:20) य के खान का ;व ामी, अिभकता O या (cid:20)बंधक संबंिधत पदधा-रय(cid:16) को A यवहार सिं हता क(cid:28) (cid:20)ितयाँ सsपेगा तथा
उसका (cid:20)भावी (cid:20)वतOन सिु नि(cid:147)त करेगा।
(5) उप-िविनयम (3) के अधीन िवरिचत A यवहार सिं हता क(cid:28) एक (cid:20)ित सदवै खान के कायालO य म 8रखी जाएगी।
111111116666.... हहहहााााउउउउसससस----कककक---- RR R Rपपपपगगगग....---- (1) ऐसी खलु ी सामaी, जो उपयोग के िलए अपिे >त नहq ह,ै को इस (cid:20)कार स ेरखी या छोड़ी
नहq जाएगी (cid:4)क वह काय O;थ ल और मागx म8 खतरनाक (cid:21)प से बाधा डाल।े
(2) >ित रोकने के िलए सभी बाहर िनकली %ई क(cid:28)ल 8 और रेbलग(cid:16) के िसर(cid:16) को मोड़ (cid:4)दया जाएगा या संर>ण
;व (cid:21)प ढक (cid:4)दया जाएगा।
(3) कायO ;थ ल(cid:16), (cid:20)वेश या िनकास म 8;5 ैप, अपिशT ट और कूड़ा-करकट इकmा नहq होने (cid:4)दया जाएगा।
(4) ऐसे काय O ;थ ल(cid:16) और मागx को िजनम8 तले , पकं या अ(cid:25)य कारण(cid:16) स े (cid:4)फसलन हो गई ह,ै साफ (cid:4)कया जाएगा
और सरु ि>त बना (cid:4)दया जाएगा।
(5) सुवा(cid:132) उप;क र को उसका उपयोग करन े के पJ चात ् उसके अिभिहत संचयन ; थान पर वापस भजे (cid:4)दया
जाएगा।
(6) उप;क र, औजार और छोटी व; तुu को इधर-उधर नहq पड़ े रहने (cid:4)दया जाएगा िजसस े (cid:4)क उनके िगरने या
(cid:4)कसी Aय ि" क(cid:28) हाथ लगन ेसे कोई दघु Oटना न हो।48 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
111111117777.... ससससााााधधधधााााररररणणणण (cid:16)(cid:16)(cid:16)(cid:16)ककककााााशशशश DDDDवववव++++थथथथाााा....---- (1) िन(cid:144)िलिखत ;थान(cid:16) पर कायO-काल के दौरान पयाOI साधारण (cid:20)काश क(cid:28)
rव;था क(cid:28) जाएगी, अथाOत -
(क) जहाँ (cid:20)ाकृितक (cid:20)काश अपयाIO हो;
(ख) ड-े रक yलेर पर;
(ग) ि[लर ;ट Hड और िनयEं ण पनै ल पर;
(घ) मंक(cid:28) बोड Oपर;
(ड.) (cid:20) य के इंजन और पपं हाउस पर;
(च) Gल ोआउट (cid:20)ीव8टर िनयंEण के समीप ड-े रक उप-संरचना पर;
(छ) ऐसे (cid:20) य ेक ;थ ान पर जहा ँA यि"य(cid:16) को काय Oकरना होता ह;ै और
(ज) बाहर िनकलन,े (cid:20)वेश या िनकास के (cid:20) य ेक साधन पर।
(2) (cid:4)कसी खान म 8(cid:20)बंध क(cid:28) गई (cid:20)काश rव;था यथासंभव इस (cid:20)कार से A यवि;थत क(cid:28) जाएगी (cid:4)क उसक(cid:28) चमक
से या नेE-तनाव स ेिनवारण (cid:4)कया जा सके।
111111118888.... ववववffैैffैै ततुुततुु (cid:16)(cid:16)(cid:16)(cid:16)ककककााााशशशश DDDDवववव++++थथथथाााा....---- (1) (cid:20) यके वैjुत (cid:20)काश सािधE िजनका उपयोग (cid:4)कसी खान के जोिखममय >ेE म 8
(cid:4)कया जाता हो, वे ऐस े (cid:20)कार और िविनदशw न(cid:16) के ह(cid:16)ग े जो इस (cid:20)योजन हते ु अिभ(cid:127)ात (cid:4)कए गए (cid:4)कसी भारतीय या
अंतराOTp ीय मानक के अनु(cid:21)प ह(cid:16) :
पर(cid:25)त ,ु ऐसे सािधE(cid:16) का खान के जोिखममय >ेE म8 उपयोग तभी (cid:4)कया जाएगा जब वे उपरो) त अनु(cid:20)योcय
मानक(cid:16) के अनुसार परीि>त (cid:4)कए गए ह(cid:16) और परी>ण(cid:16) म8 पास हो चकु े ह(cid:16) और (cid:20)बंधक ने उनके (cid:20)कार, िविनदशw न(cid:16)
के िववरण, उन खास मानक(cid:16) के सदं भ,O उन मानक(cid:16) के अनुसार परी>ण के मापदडं एव ं परी>ण क(cid:28) ि;थित, परी>ण
के ;थ ान, परी>ण -रपोटO या -रपोटx क(cid:28) (cid:20)ितय(cid:16) और (cid:4)क(cid:25) हq अ(cid:25) य ससु ंगत िववरण(cid:16) का एक -रकॉड O रख चकु ा हो;
अ(cid:25)य था नहq।
(2) खान म 8 सं;थािपत (cid:20)काश rव;था (cid:20)णाली, के(cid:25) (cid:26)ीय िवjतु (cid:20)ािधकरण (सुर>ा एवं िवjुत आपूzत संबंिधत
उपाय) िविनयम, 2010 के उपबंध(cid:16) का अनुपालन करेगा।
111111119999.... (cid:16)(cid:16)(cid:16)(cid:16)ककककााााशशशश >>>>यय यय >>>> ++ + +थथ थथ ाााा ककककेेेे ममममााााननननकककक....---- (cid:4)कसी खान म 8 (cid:4)कसी भी िविनSद(cid:128) >ेE या ;थान(cid:16) म8 (cid:20)बंध (cid:4)कए जान े वाल े (cid:20)काश के
मानक तेल उjोग सुर>ा िनदशे ालय के अनुशंिसत (cid:20)ैि)टस, OISD-RP-149 या उसके सशं ोिध त सं; करण के अनसु ार
ह(cid:16)गे।
111122220000.... आआआआपपपपााााततततककककााााललललीीीीनननन (cid:16)(cid:16)(cid:16)(cid:16)ककककााााशशशश DDDDवववव++++थथथथाााा....---- आपात ि;थित म8 तरु (cid:25) त उपयोग के िलए पयाOR त स}ं या म8 ऐसे से(cid:6)फ कंट8ड पोटwबल
हडH लHप उपल(cid:150)य रखे जाएगँ े जो मु}य िनरी>क (cid:31)ारा सामा(cid:25) य या िवशेष िलिखत आदशे म 8िविनSदTट मानक का हो।
111122221111.... ससससररंंररंं (cid:22)(cid:22)(cid:22)(cid:22)ाााा2222मम मम कककक पपपपैरैरैरैर ककककेेेे पपपपहहहहननननाााावववव ेे ेेकककक---- आआआआपपपप""ूू""ूू तततत औऔऔऔरररर उउउउपपपपययययोोोोगगगग....---- (1) कोई भी Aय ि" (cid:4)कसी खान म8 तब तक न तो जाएगा
न वहाँ कायO करेगा और न ही उसे वहाँ कायO करने (cid:4)दया जाएगा जब तक उसने ऐसे (cid:20)कार और िविनदशw न(cid:16) का
संर>ा म क पैर का पहनावा न पहन रखा हो जो इस (cid:20)योजन हते ु अिभ(cid:127)ात (cid:4)कए गए (cid:4)कसी भारतीय या अतं राOT pीय
मानक के अनु(cid:21)प ह(cid:16) :
पर(cid:25)त ,ु ऐसे पैर के पहनावे का, खान म8 तभी उपयोग (cid:4)कया जाएगा जब व े उपरो) त अनु(cid:20)योc य मानक(cid:16) के
अनसु ार परीि>त (cid:4)कए गए ह(cid:16) और परी>ाu म8 पास हो चकु े ह(cid:16) और (cid:20)बंधक ने उनके (cid:20)कार, िविनदशw न(cid:16) के िववरण,
उन खास मानक(cid:16) के सदं भ,O उन मानक(cid:16) के अनसु ार परी>ण के मापदडं एवं परी>ण क(cid:28) ि;थित, परी>ण के ; थान,
परी>ण -रपोटO या -रपोटx क(cid:28) (cid:20)ितय(cid:16) और (cid:4)क(cid:25) हq अ(cid:25) य ससु ंगत िववरण(cid:16) का एक -रकॉड Oरख चुका हो; अ(cid:25)य था नहq।
(2) उप-िविनयम (1) म 8 िनSद(cid:128) सरं >ा मक परै का पहनावा, ;वामी, अिभकताO या (cid:20)बधं क (cid:31)ारा, एक वषO स े
अनिधक अंतराल पर, या ऐस ेअ(cid:25)य अंतराल(cid:16) पर जो मु}य िनरी>क (cid:4)कसी सामा(cid:25) य या िविशT ट िलिखत आदशे (cid:31)ारा
िनSद(cid:128) कर8, आपूzत (cid:4)कया जाएगा :¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 49
पर(cid:25)त ,ु जहाँ ऐसे परै का पहनावा िविधस(cid:18) मत उपयोग के दौरान >ितa; त हो जाता ह,ै तो उसे तरु (cid:25)त
िन:शु(cid:6)क बदल (cid:4)दया जाएगा।
111122222222.... ससससररंंररंं (cid:22)(cid:22)(cid:22)(cid:22)ाााा2222मम मम कककक हहहहललेेललेे ममममटटेेटटेे कककक---- आआआआपपपप""ूू""ूूतततत औऔऔऔरररर उउउउपपपपययययोोोोगगगग....---- (1) कोई भी Aय ि" (cid:4)कसी वधे न -रग, वकOओवर -रग या -रग
बनाने या -रग खोलने या काय O के ऐसे अ(cid:25) य ; थान म8 जहाँ पर (cid:4)कसी व; तु के उड़ने या िगरने स े खतरा हो सकता ह,ै
तब तक न तो जाएगा न वहाँ कायO करेगा और न ही उसे वहा ँकायO करने (cid:4)दया जाएगा जब तक उसने ऐसे (cid:20)कार और
िविनदशw न(cid:16) का हले मेट न पहन रखा हो जो इस (cid:20)योजन हते ु अिभ(cid:127)ात (cid:4)कए गए (cid:4)कसी भारतीय या अ(cid:25) तराOT pीय
मानक के अनु(cid:21)प हो।
पर(cid:25)त ु ऐसे हले मेट खान म8 तभी उपयोग (cid:4)कए जाएगँ े जब वे उपरो) त अनु(cid:20)योc य मानक(cid:16) के अनुसार
परीि>त (cid:4)कए गए ह(cid:16) और परी>ण(cid:16) म8 पास हो चुके ह(cid:16) और (cid:20)बंधक ने उनके (cid:20)कार, िविनदशw न(cid:16) के िववरण, उन खास
मानक(cid:16) के सदं भ,O उन मानक(cid:16) के अनसु ार परी>ण के मापदडं एवं परी>ण क(cid:28) ि;थित, परी>ण के ;थ ान, परी>ण
-रपोटO/-रपोटx क(cid:28) (cid:20)ितय(cid:16) और (cid:4)क(cid:25)ह q अ(cid:25) य ससु ंगत िववरण(cid:16) का एक -रकॉड Oरख चुका हो; अ(cid:25)य था नहq।
(2) उप-िविनयमन (1) म8 िनSद(cid:128) हले मेट क(cid:28) आपzू त ;वामी, अिभकता O या (cid:20)बंधक (cid:31)ारा तीन वषO स े अनिधक के
अंतराल(cid:16) पर क(cid:28) जाएगी, जो उनक(cid:28) आवJ यकतानसु ार, तरु (cid:25)त आपूzत सुिनि(cid:147)त करन े के िलए हले मटे का पयाOR त
भंडार हर समय बनाए रखगे ा :
पर(cid:25)त ,ु जब हेलमेट िविधस(cid:18) मत उपयोग के दौरान >ितa;त हो जाता ह,ै तो उसे तरु ंत बदल (cid:4)दया जाएगा।
(3) ;व ामी, अिभकताO या (cid:20)बंधक सरं >ा मक पैर के पहनाव ेऔर हले मेट को िन:शु(cid:6)क (cid:20)दान करेगा।
111122223333.... ससससररंंररंं (cid:22)(cid:22)(cid:22)(cid:22)ाााा2222मम मम कककक उउउउपपपप++++कक कक रररर....---- (1) ऐसे (cid:20) य के A यि" को जो सं(cid:4)5याu म 8लगा %आ ह ैऔर ऐस े(cid:20) य ेक अ(cid:25) य A यि" के िलए,
जो स(cid:4)ं 5या स े होने वाली >ित क(cid:28) जोिखम िवषाकतन या रोग के िलए उ(cid:130) छ(cid:25) न हो सकता ह ै िन(cid:18) निलिखत क(cid:28)
Aय व;थ ा क(cid:28) जाएगी -
(क) जोिखम पर िनभरO करत े %ए, उपयु) त संर>ा म क उप; कर िजसके अ(cid:25)त गOत J वसन संर>ा म क
उप;क र, नेE सरं >ी, द; तान,े च(cid:16)गा तथा ए(cid:20)न ह;ै और
(ख) वषO म 8 और उa मौसम क(cid:28) प-रि;थितय(cid:16) म8 उपयोग के िलए उपयु)त संर>ा म क बाहर पहनन े के
कपड़।े
(2) उप-िविनयम (1) के अधीन सभी संर>ा म क उप; कर िन:शु(cid:6) क आपzू त (cid:4)कए जाएगँ े।
(3) (cid:20) य के Aय ि" िजसे संर>ा म क उप; कर (cid:20)दान (cid:4)कए गए ह(cid:16), वह काय Oके दौरान उनका उपयोग करेगा।
111122224444.... (cid:15)(cid:15)(cid:15)(cid:15)वव वव ििििनननन सससस ेे ेेससससररंंररंं (cid:22)(cid:22)(cid:22)(cid:22)णणणण....---- (1) ;वामी, अिभकता O या (cid:20)बंधक, ‘ विन ;तर को कम करने के िलए और कमकO ार(cid:16) पर ‘ विन
के (cid:20)भाव को कम करने के िलए कदम उठाएगा ।
(2) कोई Aय ि" को, उस >ेE म 8 जहा ँ वह 90 डसे ीबल से अिधक के समतु(cid:6) य िनरंतर ‘ विन-; तर के (cid:20)भाव म 8 ह,ै
िबना समिु चत कणO संर>ी के काय Oक(cid:28) अनमु ित नहq दी जाएगी।
(3) कोई Aय ि" उस >ेE म 8 जहा ँ ‘ विन ; तर 140 डसे ीबल या उससे अिधक ह ै न तो (cid:20)वेश करेगा और न उसे
(cid:20)वेश करन ेक(cid:28) अनु(cid:127)ा दी जाएगी।
(4) मु}य िनरी>क राजपE म8 समय-समय पर अिधसूचना (cid:31)ारा खान म 8 (cid:4)कसी >ेE या ; थान पर अन(cid:127)ु ेय ‘ विन
(cid:20)भावन िविनSदTट कर सकता ह।ै
111122225555.... ससससससंंससंं चचूूचचूू ननननाााा....---- (1) ऐसे सं;थ ापन(cid:16), जहा ँA यि" कायO करते ह,H िजसम8 (cid:20)बंधक का कायालO य और कायO के अ(cid:25) य ; थान(cid:16) के
बीच ससं ूचना के (cid:20)भावशाली उपाय(cid:16) क(cid:28) A यव; था क(cid:28) जाएगी और उनको ठीक चालू हालत म 8 बनाए रखा जाएगा,
और जहा ँ कहq संभव हो वहाँ ससं ूचना A यव; था रेिडयो टेलीफोन (cid:31)ारा क(cid:28) जाएगी और अनकु (cid:6) पी सकं ेतन साधन(cid:16) क(cid:28)
भी Aय व;थ ा क(cid:28) जाएगी।
(2) बाहरी संसूचना संचार के िलए उप; कर का चयन स(cid:4)ं 5या म क ज(cid:21)रत(cid:16), गितिविध के (cid:20)कार और खतर(cid:16) एव ं
दघु Oटना क(cid:28) प-रभािषत ि;थितय(cid:16) के आधार पर (cid:4)कया जाएगा ।
(3) संसूचना उप;क र और संब\ िवjुत आपzू त को इस तरह अिभकि(cid:6)पत या संरि>त (cid:4)कया जाएगा (cid:4)क वह
खतरे और दघु Oटना क(cid:28) ि;थितय(cid:16) म8 भी चालू रह।े50 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(4) खान म8 सं;थ ािपत ससं ूचना और सकं ेतन (cid:20)णाली, के(cid:25) (cid:26)ीय िवjुत (cid:20)ािधकरण (सुर>ा एव ं िवjुत आपूzत
संबंिधत उपाय) िविनयम, 2010 के उपबंध(cid:16) का अनुपालन करेगा।
111122226666.... ऊऊऊऊंंंंचचचचााााईईईई पपपपरररर ककककाााायययय ** **ककककररररनननन ेे ेेककककेेेे ददददौौौौरररराााानननन ससससररुुररुु (cid:22)(cid:22)(cid:22)(cid:22)ाााा....---- जहाँ कोई rि" 1.8 मीटर स ेअिधक ऊंचाई पर कायO कर रहा हो और जहाँ
िगरन े के खतरे क(cid:28) सभं ावना ह,ै वहाँ ;वामी, अिभकताO या (cid:20)बंधक, भारतीय मानक Gयरू ो के IS-3521 मानक या
उसके सशं ोिधत सं;क रण के अन(cid:21)ु प, फुल बॉडी हानसे वाला सरु >ा बै(cid:6) ट क(cid:28) A यव; था करेगा जो एक लाइफ लाइन के
साधन(cid:16) के (cid:31)ारा एक ;थ ायी एकं र से जुड़ा हो।
111122227777.... ििििववववषषषषाााा4444 धधधधललूूललूू ,,,, गगगगससैैससैै ???? औऔऔऔरररर आआआआययययननननककककााााररररीीीी ििििवववव;;;;ककककररररणणणण ककककााााररररकककक???? ककककेेेे (cid:16)(cid:16)(cid:16)(cid:16)िििितततत पपपपवववूूवूू ाााावव**वव** धधधधााााििििननननययययाााा..ँँ..ँँ----
(1) िवषैली धलू , गैस(cid:16), धमू और आयनकारी िव(cid:4)करण के उ सजOन को जहाँ तक सभं व हो eोत पर रोका जाएगा
या िनयिं Eत (cid:4)कया जाएगा।
(2) (cid:20) य के Aय ि" को, जो िवषलै ी धूल, गैसो, धूम और आयनकारी िव(cid:4)करण क(cid:28) जोिखम के िलए उ(cid:130) छ(cid:25) न (cid:4)कया
जाता ह,ै उसे एक स>म Aय ि" (cid:31)ारा सरु >ा कायकO रण प\ित और तकनीक के बारे म 8अनदु शे (cid:4)दए जाएँगे।
(3) िवषा" धलू , गैस(cid:16), धमू और आयनकारी िव(cid:4)करण के (cid:20)भावन (ए)स पोजर) क(cid:28) अनु(cid:127)ये सीमा पयाOवरण, वन
और जलवायु प-रवतOन मंEालय म8 के(cid:25) (cid:26)ीय सरकार के (cid:4)दशा-िनदशw (cid:16) के अनुसार होगी।
111122228888.... ससससररुुररुु (cid:22)(cid:22)(cid:22)(cid:22)ाााा चचचचततेेततेे ााााववववननननीीीी ककककेेेे ससससककंंककंं ेेेेतततत....---- (1) संचयन >ेE और िवषलै ी, सं>ारक cव लनशील, िवषा) त और रेिडयो ऐ) टीव
सामaी के आधान(cid:16) को उिचत (cid:21)प स े लेबल लगाए जाएँगे और सामaी सुर>ा डाटा शीट के अतं वO; तु के अनुसार
समुिचत (cid:21)प से उनका संचय (cid:4)कया जाएगा।
(2) खतरनाक प-रि;थितय(cid:16) का jोतन करन ेके िलए चेतावनी सकं ेत िचपकाए जाएँगे।
(3) ऐसे >ेE(cid:16) म,8 जहा ँवैयि"क संर>ा उप;क र के उपयोग क(cid:28) अप>े ा ह,ै चेतावनी संकेत िचपकाए जाएँगे।
(4) पहचान संकेत सहज दJृ य; थान(cid:16) म8 ; पT टत: िचपकाए जाएँगे िजससे आपात उप;क र और बचाव मागO क(cid:28)
(cid:4)दशा का पता चल सके।
(5) उ¤ दाब पर वाTप या तरल पदाथO क(cid:28) ढुलाई करने वाल ेपाईप लाइन8 ;प(cid:128) (cid:21)प स ेिचि(cid:25)हत (cid:4)कए जाएँगे।
111122229999.... पपपपययययाााावव**वव** ररररणणणण ककककेेेे (cid:16)(cid:16)(cid:16)(cid:16)ददददषषषषूूूू णणणण सससस ेे ेेससससररंंररंं (cid:22)(cid:22)(cid:22)(cid:22)णणणण....---- (1) (cid:4)कसी भी तरल पदाथO को सम(cid:26)ु या ताज े जल संरचना या (cid:4)कसी जलाशय म 8
िवसzजत करन े से पूव O पयाOवरण, वन और जलवायु प-रवतनO मंEालय म8 के(cid:25)(cid:26) ीय सरकार के (cid:4)दशा- िनदशw (cid:16) का
अनुपालन (cid:4)कया जाएगा।
(2) (cid:4)कसी कूप स,े उसक(cid:28) पzू त, परी>ण और मर(cid:18)म त के दौरान, िन; सा-रत कोई तले उपयु)त (cid:21)प से िनzमत
और पयाORत (cid:21)प से बाड़ायु)त Gय यन गतx म 8या समुिचत (cid:21)प स ेअवि;थत टं(cid:4)कय(cid:16) म8 इकmा (cid:4)कया जाएगा।
(3) (cid:4)कसी िनपटान गतO का िनमाOण, (cid:4)कसी रेल माग,O सावOजिनक लोक मागO या (cid:4)कसी लोक िनमाOण या (cid:4)कसी
अ(cid:25)य ऐसी ;थायी संरचना, जो ;व ामी का नहq ह,ै स ेपतै ालीस मीटर के भीतर नहq (cid:4)कया जाएगा।
(4) (cid:4)कसी कूप, टंक(cid:28) या अ(cid:25)य उ पादन सं; थापन स े अससं ािधत गंदा जल, शलै समूह जल, तले , वेधन तरल,
अपिशTट , रासायिनक पदाथO या कचरे स-े
(क) लोक ;वा;(cid:129)य और सुर>ा को खतरा पैदा करन;े
(ख) (cid:4)कसी ; व(cid:130)छ जल संरचना या जल रािश म8 चले जाने या दिूषत करने या ऐसे ; थान पर रहन े
िजसस ेकोई ;व (cid:130)छ जल या जल-रािश दिूषत हो जाए; और
(ग) (cid:4)कसी भूिम, राजमागO या लोक मागO पर िबखरन े या उ(cid:25) ह 8 नुकसान प%चँ ान े क(cid:28) अनु(cid:127)ा नहq दी
जाएगी।
(5) (cid:4)कसी तरल पदाथO को समु(cid:26) या ताज ेजल सरं चना या (cid:4)कसी जलाशय म8 िवसzजत करने से पूवO उसे ससं ािधत
(cid:4)कया जाएगा और िनयिमत अतं राल पर उस (cid:26)व के नमूने (cid:20)ाI (cid:4)कए जाएँगे और उनका िव‹ेषण (cid:4)कया जाएगा तथा
इस (cid:20)कार के िव‹ेषण के प-रणाम(cid:16) को नमनू े (cid:20)ाR त करन े वाले तथा िवJल ेषण करन े वाल े A यि" (cid:31)ारा अनुरि>त
(cid:4)कया जाएगा।
(6) (cid:4)कसी भी रYी, अित-र)त या अ(cid:20)यु" सामaी को समु(cid:26) म 8या (cid:4)कसी सं;थापन के आसपास के >ेE म 8िगरान े
या िनपटाने क(cid:28) अनमु ित (cid:20)दान नहq क(cid:28) जाएगी ।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 51
(7) (क) (cid:4)कसी सं;थ ापन म8 उ पा(cid:4)दत गैस का वायुमंडल म 8 िन; सारण क(cid:28) तब तक अनु(cid:127)ा नहq दी जाएगी
जब तक उस ेखंड (ख) के अनुसार जलाया न जाए।
(ख) खंड (क) म8 िनSद(cid:128) जलाए जान ेवाली गसै क(cid:28) c वाला लाइन का िन(cid:18) निलिखत तरीके से िन; सारण
(cid:4)कया जाएगा, अथाOत -
(i) yलेयर क(cid:28) िचमनी क(cid:28) ऊँचाई और सुरि>त दरू ी उT मा िव(cid:4)करण के अ‘ययन तथा जोिखम के
कारण(cid:16) के िवचार पर आधा-रत होगी, जो उपयु)त भारतीय या अंतररा(cid:145)ीय मानक(cid:16) या पयाOवरण, वन और
जलवाय ुप-रवतOन मंEालय म8 के(cid:25) (cid:26)ीय सरकार (cid:31)ारा िनगतO (cid:4)दशा-िनदशw (cid:16) पर आधा-र त ह(cid:16)गे;
(ii) cव ाला लाइन को पयाOR त (cid:21)प से कस (cid:4)दया जाएगा और c वाला के बझु न े को रोकन े के िलए (cid:4)कसी
उपयु)त साधन क(cid:28) Aय व;थ ा क(cid:28) जाएगी; और
(iii) जब गैस (cid:20)वाह आ(cid:25) तराियक ह ै तब c वाला लाइन म8 सदु रू िनयिं Eत िवjुत c वलन युि" क(cid:28)
Aय व;थ ा क(cid:28) जाएगी िजससे (cid:4)क (cid:4)कसी गैस के सतत c वलन को सिु नि(cid:147)त (cid:4)कया जा सके।
111133330000.... बबबबााााड़ड़ड़ड़....---- (1) भिू म पर कूप को, प%चँ (cid:31)ार(cid:16) का मजबतू ी स े तालाबंद के साथ सरु ि>त (cid:21)प स े घरे ाबंद (cid:4)कया
जाएगा।
(2) (cid:20) य के ि[bलग या वकO ओवर -रग के चार(cid:16) ओर के सरं ि>त >ेE पर 1.8 मीटर से अ(cid:25) यून ऊँचाई क(cid:28) बाड़ क(cid:28)
Aय व;थ ा क(cid:28) जाएगी।
(3) ;थ ायी सं;थ ापन को 1.8 मीटर स ेअ(cid:25) यून ऊँचाई क(cid:28) संर>ा म क दीवार स ेघरे ा जाएगा।
(4) (cid:4)कसी ऐस े ;थ ान म 8 िजसम8 स(cid:18)य क (cid:21)प स े बाड़ लगाया गया ह,ै (cid:4)कसी अनािधकृत rि" का आना रोकन े के
िलए पूवाOवधािनया ँबरती जाएगँ ी ।
(5) (cid:20) य के बाड़ क(cid:28) (cid:4)कसी स>म rि" (cid:31)ारा (cid:20) यके चौदह (cid:4)दन म8 एक बार परी>ा क(cid:28) जाएगी और ऐस े (cid:20) यके
िनरी>ण क(cid:28) एक -रपोटO वह Aय ि", िजसने परी>ा क(cid:28) ह,ै (cid:31)ारा रखी जाएगी और उस े ; थल पर उपलGध रखा
जाएगा।
111133331111.... ससससररुुररुु (cid:22)(cid:22)(cid:22)(cid:22)ाााा (cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं नननन ययययोोोोजजजजननननाााा....---- ((((1111)))) (cid:20) य के खान के ; वामी, अिभकताO और (cid:20)बंधक, खान क(cid:28) सभी सं(cid:4)5याu के संबंध म 8
सुर>ा (cid:20)बंधन योजना तैयार करेगा और उसका (cid:4)5या(cid:25) वयन करेगा, जो संगठन के स>म (cid:20)ािधकारी (cid:31)ारा स(cid:18) यक (cid:21)प
से अनमु ो(cid:4)दत ;व ा;(cid:129) य , सरु >ा और पयाOवरण नीित के अनु(cid:21)प होगा, और उस ेऐसे तरीके से बनाया जाएगा (cid:4)क -
(क) (cid:4)कसी भी गितिविध या उससे जुड़ े मामल(cid:16) के संबंध म8 अिधिनयम और इन िविनयम(cid:16), उप-िनयम(cid:16)
और तदधीन (cid:4)कए गए आदशे (cid:16) का अनुपालन (cid:4)कया जाए;
(ख) सुर>ा (cid:20)बंधन योजना को अंaेजी म,8 और, य(cid:4)द संबंिधत कमOचा-रय(cid:16) (cid:31)ारा अंaेजी नहq समझी
जाती ह ैतो, िह(cid:25)द ी म 8तयै ार (cid:4)कया जाएगा;
(ग) सुर>ा और ;वा;(cid:129)य के िनT पादन को सिु नि(cid:147)त करन े के उYJे य से, एक संगठना मक संरचना
;थ ािपत हो;
(घ) सुर>ा और ;वा;(cid:129)य के िलए जोिखम मू(cid:6)या(cid:4)ं क त (cid:4)कया जाता हो और A यि"य(cid:16) के जोिखम तथा
(cid:20)भािवत होन ेक(cid:28) सभं ावना वाली मशीनरी या उप;क र क(cid:28) >ित को कम करन ेके िलए उपाय (cid:4)कए जात ेह(cid:16);
(ड.) सुर>ा और ;वा;(cid:129)य को बढ़ावा दने े को सुिनि(cid:147)त करने के िलए उिचत िनयंEण ; थािपत (cid:4)कए गए
ह(cid:16);
(च) इसम8 सरु >ा िनयमावली, िनयम और िविनयम के A यव; था (cid:4)कए गए ह(cid:16);
(छ) इसम8 सभी मह वपूण Oगितिविधय(cid:16) के िलए मानक (cid:20)चालन कायOिविध क(cid:28) A यव; था क(cid:28) गई ह(cid:16);
(ज) इसम 8खतर(cid:16) क(cid:28) पहचान और जोिखम(cid:16) के आकं लन तथा अिभ(cid:127)ात खतरनाक जोिखम(cid:16) को दरू करन े
के िलए उपाय (cid:4)दए गए ह(cid:16);
(झ) यह िनरी>ण, परी>ण और उप; कर एवं मशीनरी के रख-रखाव के िलए (cid:4)दशा-िनदशw का उपबंध
करता हो;52 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ञ) उसम8 स(cid:4)ं 5या म क कायOकलाप(cid:16), चाल ू करन े से पूवO के संबंध म 8 सरु >ा समी>ा तंE, वकO परिमट
(cid:20)णाली, वैधािनक (cid:20)िश>ण, यांिEक एक(cid:28)करण काय5O म, िनरी>ण एवं परी>ण, घटना संबंधी जाँच, काय O
समापन पर सरु >ा, सुर>ा -रकॉड,O ;वा;(cid:129)य जोिख म आंकड़(cid:16) के िलए िव;त ृत कायO(cid:20)णाली का उपबंध हो;
(ट) यह तेल उjोग सरु >ा िनदशे ालय के (cid:4)दशा-िनदशw , OISD-GDN-178, के अनुसार (cid:20)(cid:4)5या और
उप;क र स ेसबं ंिधत प-रवतOन(cid:16) के (cid:20)बंधन का उपबंध करता हो;
(ठ) यह सुर>ा सिमितय(cid:16) के मा‘यम से कमOचा-रय(cid:16) क(cid:28) भागीदारी को लागू करन ेके िलए िलिख त कायO
योजना का उपबधं करता हो;
(ड) यह आपातकालीन तयै ारीकरण और (cid:20) यु त र योजना का उपबधं करता हो;
(ढ) यह पयाOI संचार और सुर>ा (cid:20)दशOन का उपबंध करता हो;
(ण) यह (cid:4)कसी ऐस े अ(cid:25) य मYु (cid:16) का भी उपबधं करता हो जो खान म 8 कायOरत कzमय(cid:16) क(cid:28) सुर>ा और
rावसाियक ;वा;(cid:129)य सिु नि(cid:147)त करने के िलए आवJयक ह;ै
(त) यह सिं वदा मक कायx या सेवाu के िलए संपकO द;तावेज का उपबंध करता हो;
(थ) यह लागू भारतीय या अंतररा(cid:145)ीय मानक और A यवहार(cid:16) के अनुसार िनरी>ण, िनगरानी, अंके>ण,
समी>ा, (cid:20)िश>ण और िन य सतत् सुधार का उपबंध करता हो; और
(द) यह मु}य िनरी>क (cid:31)ारा िलिखत (cid:21)प स े िविनSद(cid:128) (cid:4)कसी अ(cid:25)य कायकO लाप या सं(cid:4)5या के िलए
उपबंध करता हो।
(2) ;व ामी, अिभकता O या (cid:20)बंधक यह सुिनि(cid:147)त करेगा (cid:4)क सरु >ा (cid:20)बंधन योजना क(cid:28) एक (cid:20)ित खान के सभी
सं;थ ापन(cid:16) पर उपलGध हो।
(3) उप-िविनयम (2) म8 िनSदTट सरु >ा (cid:20)बंधन योजना क(cid:28) एक (cid:20)ित को इन िविनयम(cid:16) के लागू होने क(cid:28) तारीख
से एक सौ अ;स ी (cid:4)दन के भीतर मु}य िनरी>क और >ेEीय िनरी>क को (cid:20); तुत (cid:4)कया जाएगा।
(4) (cid:20) य के खान का ;व ामी, अिभकताO या (cid:20)बंधक, खान के (cid:20) य के सं; थापन के िलए सुर>ा (cid:20)बंधन योजना म 8
इस (cid:20)योजन के िलए िविनSदTट अंतराल(cid:16) पर स(cid:18) यक (cid:21)प से िनयु) त टीम (cid:31)ारा आंत-रक सरु >ा अकं े>ण कराने का
(cid:20)बंध करेगा :
पर(cid:25)त ,ु ऐसे (cid:20) य के सं;थ ापन के िलए (cid:20)थम सरु >ा अकं े>ण, इन िविनयम(cid:16) के (cid:20)वृ त ् होने से एक वषO के भीतर
कर िलया जाएगा।
(5) उप-िविनयम (4) के अधीन (cid:4)कए गए (cid:20) येक सरु >ा अंके>ण का -रपोटO अनुरि>त (cid:4)कया जाएगा।
अअअअ(cid:15)(cid:15)(cid:15)(cid:15)ययययाााायययय –––– 11111111
ििििववववििििववववधधधध
111133332222.... ठठठठेेेेककककेेेेददददाााारररर,,,, अअअअििििभभभभककककHHHHपप पप कककक औऔऔऔरररर ससससववेेववेे ाााा (cid:16)(cid:16)(cid:16)(cid:16)ददददाााातततताााा....---- ठेकेदार, अिभक(cid:6) पक और सेवा (cid:20)दाता को (cid:4)कराए पर लेन े के दौरान ; वामी
और अिभकता O यह सिु नि(cid:147)त कर8गे (cid:4)क, यथाि;थित, ठेकेदार तथा सेवा (cid:20)दाता अिधिनयम या तदधीन बने िनयम,
िविनयम, उप-िनयम या आदशे (cid:16) क(cid:28) अपे>ाu को पूरा करने क(cid:28) यो(cid:138) यता रखते ह,H और तकOसंगत (cid:21)प स े यह भी
सुिनि(cid:147)त कर8गे (cid:4)क ऐस े ठेकेदार, अिभक(cid:6) पक तथा सवे ा (cid:20)दाता खान म8 उ(cid:25) ह 8 सsपे गए कतOA य(cid:16) या अपे>ाu का
अनुपालन कर8गे।
111133333333.... ससससााााधधधधााााररररणणणण ससससररुुररुु (cid:22)(cid:22)(cid:22)(cid:22)ाााा....---- कोई भी rि" उपे>ापूवOक या जान बझू कर ऐसी कोई बात नहq करेगा िजसस े खान म 8 जीवन या
अंग के खतरे म 8 पड़ने क(cid:28) संभावना ह ै या उप>े ापूवकO या जानबूझकर कोई ऐसी बात करने का लोप नहq करेगा जो
खान या उसम 8िनयोिजत Aय ि"य(cid:16) क(cid:28) सरु >ा के िलए आवJ यक ह।ै
111133334444.... ससससररुुररुु (cid:22)(cid:22)(cid:22)(cid:22)ाााा औऔऔऔरररर ++++वव वव ाााा++++ii ii यय यय ििििशशशश(cid:22)(cid:22)(cid:22)(cid:22)ाााा औऔऔऔरररर अअअअननननददुुददुु शशेेशशेे ....---- कमकO ार(cid:16) को सरु >ा के (cid:20)ित सजग करने के िलए और (cid:20) यके ; तर पर
Aय ावसाियक सरु >ा तथा ;व ा; (cid:129)य क(cid:28) जानकारी के िलए (cid:20) यके खान म 8 सुर>ा और ; वा; (cid:129) य िश>ा तथा अनुदशे के
कायO5म िनयिमत (cid:21)प से आयोिजत (cid:4)कए जाएँगे।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 53
111133335555.... ददददघघघघुुुु *ट*ट*ट*टननननाााा ++++थथ थथ लललल पपपपरररर फफफफेेेेरररर----बबबबददददलललल नननन ;;;;ककककययययाााा जजजजााााननननाााा....---- (1) जब भी खान म 8कोई दघु Oटना हो जाती ह,ै िजससे (cid:4)कसी Aय ि" को
गंभीर शारी-रक >ित या जीवन-हािन हो तो म}ु य िनरी>क या िनरी>क, िज(cid:25) ह 8 दघु Oटना क(cid:28) सचू ना अिधिनयम के
ख(cid:141)ड 23 के उपखंड (1) के अधीन दने ा अपेि>त ह,ै के आगमन से पूवO या उसक(cid:28) सहमित के िबना दघु Oटना-; थल म 8
फेर-बदल या प-रवतOन नहq (cid:4)कया जाएगा, जब तक (cid:4)क ऐसा फेर-बदल या प-रवतOन और अिधक दघु Oटनाu को रोकन े
के िलए या मृतक के शरीर को हटाने के िलए या Aय ि"य(cid:16) को खतरे से बचाने के िलए आवJ यक न हो या जब उस
;थ ान पर काम ब(cid:25)द कर दने े स ेखान के कायकO रण को चलाने म 8घोर अड़चन न पड़ती हो:
पर(cid:25)त ु य(cid:4)द मु}य िनरी>क या िनरी>क, दघु Oटना के समय के बह त र घंटे के भीतर िनरी>ण न करे तो
दघु Oटना-;थ ल पर काय O(cid:4)फर से (cid:20)ारंभ (cid:4)कया जा सकेगा।
(2) िजस (cid:4)कसी कारणवश य(cid:4)द (cid:4)कसी घातक या गभं ीर दघु टO ना वाले ; थान म 8 कोई फेर-बदल या प-रवतOन करना
ज(cid:21)री हो, तो वसै ा करने से पवू O दघु Oटना एवं सभी संबंिधत Gय sरे को दशातO े %ए एक रेखा िचE, दो (cid:20)ितय(cid:16) म,8 तैयार
(cid:4)कए जाएँगे एवं ऐसे रेखा िचE स(cid:18)य क् (cid:21)प स े (cid:20)बंधक या उप-(cid:20)बंधक, सरु >ा अिधकारी, सवw>क और कमकO ार
िनरी>क या जहाँ कोई कमOकार िनरी>क नहq ह,ै वहाँ दघु Oटना-; थल पर उपि;थत (cid:4)कसी कमकO ार (cid:31)ारा, ह; ता>-रत
कराया जाएगा, और ऐसे रेखा िचE के समथOन के िलए दघु Oटना-; थल के फोटो भी िलए जाएँगे:
पर(cid:25)त ,ु य(cid:4)द रेखा िचE तैयार करन े के पूवO दघु Oटना ; थल का, आगे और दघु Oटना रोकन े के िलए या (cid:4)कसी
Aय ि" को खतरे से बचान ेके िलए, कोई फेर-बदल या प-रवतनO (cid:4)कया जाता ह,ै तब ऐसा करने के तरु (cid:25)त बाद दघु टO ना
क(cid:28) जगह म 8फेर-बदल या प-रवतOन करने स ेपूवO क(cid:28) सभी संब\ िववरण(cid:16) को दशातO े %ए, रेखा िचE बनाया जाएगा।
(3) एक अिभ(cid:20)मािणत रेखा िचE सबं ंिधत िनरी>क को (cid:4)दया जाएगा या भेजा जाएगा।
111133336666.... ििििननननररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)णणणण ककककेेेे ददददौौौौरररराााानननन पपपपााााएएएए गगगगएएएए उउउउHHHHललललघघंंघघंं नननन???? ककककोोोो ददददशशशशाााानन**नन** ाााा....---- (1) य(cid:4)द म}ु य िनरी>क या कोई िनरी>क (cid:4)कसी खान
के िनरी>ण के दौरान अिधिनयम या तदधीन बने िविनयम(cid:16), िनयम(cid:16), उप-िनयम(cid:16) या (cid:4)कए गए आदेश(cid:16) का उ(cid:6) लघं न
पाता ह ैया उस ेइसका पता चलता ह,ै तो चाह ेवह ; वयं या (cid:4)कसी अ(cid:25) य मा‘ यम स ेऐस ेउ(cid:6) लघं न(cid:16) से उसके िनवारण के
िलए खान के ;व ामी, अिभकता Oया (cid:20)बधं क को अवगत कराएगा।
(2) ;व ामी, अिभकताO या (cid:20)बंधक उप-िविनयम(1) के अधीन सचू ना क(cid:28) (cid:20)ािI के तीन (cid:4)दन(cid:16) के भीतर उन
उ(cid:6)ल ंघन(cid:16) के िवषय-व;त ु को कम से कम प(cid:26)ं ह (cid:4)दन क(cid:28) अविध के िलए खान के सूचना प(cid:143) पर (cid:20)दzशत करेगा।
(3) खान का ;व ामी, अिभकता O या (cid:20)बंधक उप-िविनयम (1) के अधीन सूचना क(cid:28) (cid:20)ािI क(cid:28) तारीख से तीस (cid:4)दन
के भीतर, >ेEीय िनरी>क को ऐसे उ(cid:6)(cid:6) ंघन(cid:16) म 8 स े (cid:20) य ेक के िनवारण संबंधी क(cid:28) गई कारOवाई स े तथा वह िविध स े
िजसके अनुसार उ(cid:6)ल ंघन(cid:16) का िनवारण (cid:4)कया गया, अवगत कराएगा।
(4) अिभकता O या (cid:20)बंधक या उनक(cid:28) अनपु ि;थित म 8 खान का अगला c येT ठतम पदधारी, मु} य िनरी>क या
िनरी>क (cid:31)ारा (cid:4)कए गए िनरी>ण के दौरान साथ रहग8 े तथा िनरी>ण ; थल पर उनके (cid:31)ारा दशाOए गए उ(cid:6) लंघन(cid:16) को
दजO करेगा।
(5) खान का ;व ामी, अिभकताO या (cid:20)बंधक यथाशी(cid:149) मु} य िनरी>क या िनरी>क, िजसने िनरी>ण (cid:4)कया ह,ै को
उप-िविनयम(1) के अधीन (cid:20)ाRत उ(cid:6)ल ंघन(cid:16) क(cid:28) सचू ना के संबधं म8 क(cid:28) गई उपचारा मक कारOवाई का िव; तृत िववरण
भेजेगा।
111133337777.... ममममjjुुjjुु यययय ििििननननररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)कककक ::::ाााारररराााा (cid:22)(cid:22)(cid:22)(cid:22)(cid:11)(cid:11)ेे(cid:11)(cid:11)ेे ीीीीयययय ििििननननररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)कककक कककक---- शशशशिििि4444यययय???? ककककाााा (cid:16)(cid:16)(cid:16)(cid:16)ययययोोोोगगगग ककककररररननननाााा....---- इन िविनयम(cid:16) के अधीन >ेEीय िनरी>क क(cid:28)
(cid:20)द त शि"य(cid:16) का (cid:20)योग म}ु य िनरी>क (cid:31)ारा या म}ु य िनरी>क (cid:31)ारा इस िनिम त िलिखत (cid:21)प म8 (cid:20)ािधकृत (cid:4)कसी
अ(cid:25)य िनरी>क (cid:31)ारा (cid:4)कया जाएगा।
111133338888.... ििििववववववववररररििििणणणणयययय????,,,, ससससचचूूचचूू ननननााााFFFF औऔऔऔरररर पपपप(cid:11)(cid:11)(cid:11)(cid:11)ााााचचचचाााारररर पपपपरररर हहहह++++तत तत ाााा(cid:22)(cid:22)(cid:22)(cid:22)रररर....---- अिधिनयम और िविनयम(cid:16) के या उसके अधीन (cid:4)कए गए आदशे (cid:16)
के उपबंध(cid:16) के अधीन अपिे >त सभी िववरिणय(cid:16) और सूचनाu पर या (cid:4)कए गए पEाचार पर खान के ; वामी,
अिभकताO या (cid:20)बंधक (cid:31)ारा ह;त ा>र (cid:4)कए जाएँगे:
पर(cid:25)त ु यह (cid:4)क िववरिणय(cid:16), सूचनाu और पEाचार(cid:16) को इल)े p ॉिनक (cid:21)प म8 (cid:20);त ुत (cid:4)कए जाने क(cid:28) दशा म,8
;व ामी, अिभकताO और (cid:20)बंधक यह सुिनि(cid:147)त कर8गे (cid:4)क व े अंक(cid:28)कृत (cid:21)प से ह; ता>-रत (cid:4)कए गए ह H तथा उनपर (cid:4)कसी54 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
भी (cid:20)कार का प-रवतOन या िव(cid:21)पण (cid:4)कया जाना सभं व नहq ह ै तथा उ(cid:25) ह 8 इस (cid:20)कार सरु ि>त (cid:4)कया गया ह ै (cid:4)क
;व ामी, अिभकता,O (cid:20)बंधक तथा मु}य िनरी>क या (cid:4)कसी िनरी>क (cid:31)ारा उ(cid:25) ह 8पुन(cid:20)ाOR त करना सुसा‘ य हो:
पर(cid:25)त ु यह और (cid:4)क, ;व ामी, म}ु तारनाम े (cid:31)ारा य े कृ य (cid:4)कसी अ(cid:25)य िविनSदT ट A यि" को (cid:20) य ायोिजत कर
सकेगा:
पर(cid:25)त ु यह भी (cid:4)क, दघु Oटना क(cid:28) सूचना क(cid:28) बाबत (cid:20)बंधक यह कृ य िलिखत (cid:20)ािधकरण (cid:31)ारा (cid:4)कसी उप-
(cid:20)बंधक या सं;थ ापन (cid:20)बधं क को (cid:20) य ायोिजत कर सकेगा।
111133339999.... (cid:29)(cid:29)(cid:29)(cid:29)ररररपपपपोोोोटटटट**,,**,, अअअअििििभभभभललललखखेेखखेे औऔऔऔरररर ररररििििजजजज++++टट टट रररर....---- -रपोटx, अिभलेख(cid:16) और रिज; टर(cid:16), िजनका रखा जाना इन िविनयम(cid:16) के अधीन
अपेि>त ह,ै वे 5मश: इन (cid:20)योजन(cid:16) के िलए रखे गए अ(cid:25) त: पिEत सिज(cid:6) द रिज; टर(cid:16) म 8अनुरि>त (cid:4)कए जाएँगे तथा व,े
यथाि;थित, संबंिधत स>म Aय ि" पदधारी (cid:31)ारा ह; ता>-रत और (cid:20)बंधक (cid:31)ारा (cid:20)ित ह; ता>-रत (cid:4)कए जाएँगे:
पर(cid:25)त ु यह (cid:4)क, -रपोटx, अिभलखे (cid:16) और रिज; टर(cid:16) को इले) pॉिनक (cid:21)प म8 अनरु ि>त (cid:4)कए जाने क(cid:28) दशा म,8
;व ामी, अिभकताO तथा (cid:20)बधकं सुिनि(cid:147)त कर8गे (cid:4)क वे अकं (cid:28)कृत (cid:21)प स े ह; ता>-रत (cid:4)कए गए ह Hतथा उन पर (cid:4)कसी भी
(cid:20)कार का बदलाव या िव(cid:21)पण (cid:4)कया जाना सभं व नहq ह ै तथा उ(cid:25) ह 8 इस (cid:20)कार से स रु ि>त (cid:4)कया गया ह ै (cid:4)क ;व ामी,
अिभकता,O (cid:20)बंधक तथा मु}य िनरी>क या (cid:4)कसी िनरी>क (cid:31)ारा उ(cid:25) ह 8पुन(cid:20)ाOR त करना ससु ा‘ य हो:
पर(cid:25)त ु यह और (cid:4)क, (cid:20)बंधक, िसवाय उन मामल(cid:16) के जहाँ (cid:4)कसी -रपोटO या अिभलेख या रिज; टर पर (cid:20)बंधक
(cid:31)ारा (cid:20)ित ह;त ा>र (cid:4)कया जाना इन िविनयम(cid:16) के अधीन िविशT ट (cid:21)प से अपिे >त ह,ै (cid:4)कसी -रपोटO, अिभलेख या
रिज;ट र पर उसक(cid:28) ओर से (cid:20)ितह;त ा>र करन े के िलए (cid:4)कसी उप-(cid:20)बंधक या सं; थापन (cid:20)बधं क को (cid:20)ािधकृत कर
सकेगा।
111144440000.... (cid:16)(cid:16)(cid:16)(cid:16)बबबबधधंंधधंं कककक ::::ाााारररराााा अअअअननननददुुददुु 2222तत तत अअअअननननkkुुkkुु ाााा आआआआ;;;;दददद....---- (cid:4)कसी खान का भारसाधन सभं ालने पर, (cid:20) यके (cid:20)बंधक अपने पूववO तl (cid:20)बंधक या
(cid:20)बधं क(cid:16) (cid:31)ारा इन िविनयम(cid:16) के अधीन िलिखत (cid:21)प स े अनदु त सभी अन(cid:127)ु ाu क(cid:28) समी>ा करेगा और य(cid:4)द व े उ(cid:25)ह 8
अपनी सतं ुि(cid:128) के अनसु ार पाता ह ै तो, यथाि;थित, A यि)गत (cid:21)प स े उन अनु(cid:127)ाu पर (cid:20)ितह; ता>र करते %ए उनक(cid:28)
पुि(cid:128) करेगा या नए अनु(cid:127)ाए ँिनगOत करेगा या उ(cid:25) ह 8रY करेगा।
111144441111.... आआआआददददशशेेशशेे ????,,,, (cid:16)(cid:16)(cid:16)(cid:16)पपपप(cid:11)(cid:11)(cid:11)(cid:11)???? एएएएवववव ंं ंंअअअअननननददुुददुु शशेेशशेे ???? ककककाााा (cid:16)(cid:16)(cid:16)(cid:16)ककककााााशशशशनननन....---- इन िविनयम(cid:16) के अधीन आदशे (cid:16), (cid:20)(cid:21)प और अनुदशे (cid:16) को राजपE म 8 तथा
मु}य िनरी>क (cid:31)ारा िविनSदTट अ(cid:25)य उिचत मा‘ यम(cid:16) (cid:31)ारा (cid:20)कािशत (cid:4)कया जाएगा।
111144442222.... (cid:29)(cid:29)(cid:29)(cid:29)ररररययययााााययययतततत कककक---- शशशशिििि4444....---- जहाँ मु}य िनरी>क क(cid:28) राय म 8 (cid:4)कसी खान क(cid:28) प-रि;थितया ँ ऐसी ह(cid:16) (cid:4)क इन िविनयम(cid:16) म 8
िनिहत (cid:4)कसी शतO का अनुपालन (cid:4)कया जाना तकOसंगत (cid:21)प स े अA यवहायO ह,ै वहाँ वह, एक िलिखत आदशे (cid:31)ारा एव ं
ऐसी शतx के अधीन जो वह उसम 8िविनSदT ट करे, उ) त उपबंध(cid:16) से छूट (cid:20)दान कर सकता ह।ै
111144443333.... ममममjjुुjjुु यय यय ििििननननररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)कककक ककककोोोो अअअअपपपपीीीीलललल....---- >Eे ीय िनरी>क (cid:31)ारा इन िविनयम(cid:16) म 8 स े (cid:4)कसी के अधीन (cid:4)कए गए आदशे के िव(cid:21)\
कोई अपील म}ु य िनरी>क को क(cid:28) जा सकती ह,ै जो आदशे पुT ट, उपांत-रत या रY कर सकेगा और ऐसी (cid:20) यके
अपील अपीलाथl (cid:31)ारा आदशे (cid:20)ाRत करन ेके पं(cid:26)ह (cid:4)दन के भीतर क(cid:28) जाएगी।
111144444444.... ससससििििममममिििितततत ककककोोोो अअअअपपपपीीीीलललल....---- (1) मु}य िनरी>क (cid:31)ारा (cid:4)कए गए (cid:4)कसी आदशे के िव(cid:21)\, अपीलाथl (cid:31)ारा आदशे क(cid:28) (cid:20)ािI
से बीस (cid:4)दन के भीतर, अिधिनयम क(cid:28) धारा 12 के अधीन ग-ठत सिमित को क(cid:28) जा सकती ह।ै
(2) मु}य िनरी>क का (cid:20) य के आदशे , िजसके िव(cid:21)\ उप-िविनयम (1) के अधीन अपील क(cid:28) गई ह,ै का सिमित
के लिं बत अंितम िनणOय तक अनुपालन (cid:4)कया जाएगा:
पर(cid:25)त ,ु सिमित, अपीलाथl के आवेदन पर, उस आदशे का, िजसके िव(cid:21)\ अपील क(cid:28) गई ह,ै (cid:20)वतOन अपील के
िनपटारा के लंिबत रहने तक िनलंिबत कर सकेगी।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 55
अअअअननननससुुससुु चचूूचचूू ीीीी
((((ििििववववििििननननययययमममम 111100006666 ददददखखेेखखेे ))33))33
ततततललेेललेे खखखखाााानननन ककककेेेे जजजजोोोोििििखखखखममममममममयययय (cid:22)(cid:22)(cid:22)(cid:22)(cid:11)(cid:11)ेे(cid:11)(cid:11)ेे ककककाााा ववववगगगगggggककककररररणणणण ::::
(cid:1) जोन ''0'' : यह एक वैसा >ेE ह ैिजसम8 जोिखममय वातावरण सतत् (cid:21)प स ेमौजूद रहता ह।ै
(cid:1) जोन ''1'' : यह एक वैसा >ेE ह ै जहा ँ सामा(cid:25)य (cid:20)चालन दशाu के अधीन जोिखममय वातावरण के बनने
क(cid:28) संभावना रहती ह।ै
(cid:1) जोन ''2'' : यह एक वसै ा >ेE ह ै जहाँ असामा(cid:25)य (cid:20)चालन दशाu के अधीन जोिखममय वातावरण के
मौजूद रहन ेक(cid:28) संभावना रहती ह।ै
कककक.... ववववधधेेधधेे नननन औऔऔऔरररर ववववकककक****ओओओओववववरररर सससस;;ंं;;ंंVVVVययययााााएएएएँ ँ ँ ँ ::::----
((((1111)))) ककककूूूूपपपप शशशशीीीीषषषष ** **(cid:22)(cid:22)(cid:22)(cid:22)(cid:11)(cid:11)ेे(cid:11)(cid:11)ेे ::::
(i) जब ड-े रक के चार(cid:16) ओर घरे ा नहq होता ह ै और उप-संरचनाएँ संवातन के िलए खुली रहती ह ै तो
घूणl टेबल के आधार से 3.0 मीटर तक का चतSु दक >ेE जोन ''2'' जोिखममय >ेE कहलाएगा। भ-ू तल के
नीचे ि;थत कोई सले र, p8च या गतO जोन ''1'' जोिखममय >ेE माना जाएगा। (cid:4)कसी सले र, p8च या गतO के
(cid:4)कनारे स े >िै तज (cid:4)दशा म8 3.0 मीटर तक का >ेE तथा सेलर, p8च या गत O के ऊपर उदa (cid:21)प से 0.5 मीटर
तक का >ेE जोन ''2'' जोिखममय >ेE माना जाएगा।
(ii) जब ड-े रक तल तथा उप-संरचना का घेराबंदी (cid:4)कया जाता ह,ै तो ड-े रक तल के नीच े घेराबंद उप-
संरचना िजसम 8भ-ू तल के नीचे ि;थत कॉलर, गतO या संप शािमल ह,H जोन ''1'' जोिखममय >ेE होगा तथा
ड-े रक तल के ऊपर घरे ाबंद >ेE जोन ''2'' जोिखममय >ेE होगा।
((((2222)))) ममममडडडड टटटटंकंकंकंक---- एएएएवववव ंं ंंचचचचननैैननैै लललल::::
टंक(cid:28) एवं चैनल म 8 मड के तल से ऊपर का -र) त ;थ ान जोन ''1'' जोिखममय >ेE होगा। मड टंक(cid:28)
तथा चैनल के (cid:4)कनार(cid:16) से सभी (cid:4)दशाu म8 3.0 मीटर तक क(cid:28) िEc या तक के >ेE जोन ''2'' जोिखममय
होगा।
((((3333)))) शशशशललेेललेे ससससककेेककेे रररर ::::
(i) खुली हवा म 8 शले सके र स े सभी (cid:4)दशाu म 8 1.5 मीटर क(cid:28) िEc या तक का >ेE जोन ''1''
जोिखममय >ेE माना जाएगा। शले सके र स े सभी (cid:4)दशाu म 8 1.5 मीटर स े अिधक 3.0 मीटर तक का >ेE
जोन ''2'' जोिखममय >ेE माना जाएगा।
(ii) जब शेल सके र (cid:4)कसी बंद >ेE म8 ि;थत होता ह ै तो वह बंद >ेE अपने िव; तार तक जोन ''1''
जोिखममय >ेE माना जाएगा। शेल सके र के बाहर चार(cid:16) तरफ से 1.5 मीटर तक जोन ''2'' जोिखममय >ेE
माना जाएगा।
((((4444)))) ििििडडडडगगगगससैैससैै रररर ::::
व8ट के खलु े िसरे से सभी (cid:4)दशाu म 8 1.5 मीटर क(cid:28) िEc या तक का >ेE जोन ''1'' जोिखममय >ेE तथा 1.5
मीटर से परे 3.0 मीटर तक का >ेE जोन ''2'' जोिखममय >ेE होगा।
((((5555)))) ििििडडडडसससस’’ेे’’ेे डड डड रररर औऔऔऔरररर ििििडडडडििििससससHHHHटट टट रररर ::::
खुले हवा म 8 िडस(cid:25)े ड र एवं िडिस(cid:6) टर के ; थान स े सभी (cid:4)दशाu म 8 1.5 मीटर क(cid:28) िEc या के भीतर का >ेE
जोन ''2'' जोिखममय >ेE होगा।
((((6666)))) बबबबििििहहहह____ााााववववीीीी गगगगतततत ** **एएएएवववव ंं ंंखखखखललुुललुु ाााा सससस(cid:18)(cid:18)(cid:18)(cid:18)पप पप ::::
बिहeावी गत O तथा स(cid:18)प के अ(cid:25)द र c वलनशील तरल के ; तर के ऊपर का -र)त ; थान जोन ''1'' जोिखममय
>ेE होगा। (cid:4)कसी बिहeावी गतO या स(cid:18)प के (cid:4)कनारे स े >िै तज (cid:4)दशा म 8 3.0 मीटर क(cid:28) दरू ी तक का -र)त
;थ ान तथा बिहeावी गतO या खुले स(cid:18) प के ऊपर उदa (cid:21)प से 5.0 मीटर तक का उ(cid:25) मु)त >ेE जोन ''2''
जोिखममय >ेE होगा।56 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
((((खखखख)))) ततततललेेललेे ककककूूूूपपपप ::::
((((1111)))) (cid:16)(cid:16)(cid:16)(cid:16)भभभभााााववववीीीी ककककूूूूपपपप ::::
भ-ू तल के नीचे कूप >ेE को जोन ''1'' जोिखममय >ेE माना जाएगा तथा (cid:4)कसी सेलर, p8च या गतO के िसरे
से 3.0 मीटर तक >ैितज दरू ी के भीतर का >Eे तथा सले र, p8च या स(cid:18) प के ऊपर 0.5 मीटर तक उदa >Eे
जोन ''2'' माना जाएगा।
((((2222)))) ककककृृृृिििि(cid:11)(cid:11)(cid:11)(cid:11)मममम उउउउ2222तत तत ोोोोििििललललतततत ककककूूूूपपपप ::::
(i) कूप शीषO स े चार(cid:16) ओर 3.0 मीटर तक >िै तज तथा भ-ू तल स े ऊपर 3.0 मीटर तक सकर रड पंप
यु)त कूप के अ(cid:25)द र का ; थान जोन ''2'' जोिखममय >ेE माना जाएगा। सले र के मामल े म8 भ-ू तल
के नीचे का >ेE जोन ''1'' जोिखममय >ेE माना जाएगा तथा सले र के (cid:4)कनारे से >िै तज (cid:4)दशा म 8
3.0 मीटर तक तथा सेलर के ऊपर 0.5 मीटर तक का उदa >ेE जोन ''2'' जोिखममय >ेE माना
जाएगा।
कूप के भीतर :
(ii) जलम(cid:138)न ि़वjुत मोटर चािलत पंप या (cid:26)व चािलत उप-सतही पंप स ेसि§त कूप(cid:16) म8 के >ेE या गैस
उठान कूप(cid:16) के भीतर का >ेE उसी (cid:20)कार होगा जसै ा (cid:4)क सेलर या सपं यु) त कूप के िलए खंड ख(i) म 8
िविनSदTट (cid:4)कया गया ह।ै
((((3333)))) उउउउ2222पप पप ााााददददनननन पपपपररररीीीी(cid:22)(cid:22)(cid:22)(cid:22)णणणण ककककेेेे अअअअधधधधीीीीनननन ककककूूूूपपपप ::::
उ प ादन परी>ण के अधीन (cid:4)कसी कूप स ेपेpोिलयम यु) त तरल के खुली बहाव स े8.0 मीटर िEc या तक क(cid:28)
दायरे के अधीन >ेE को जोन ''1'' जोिखममय >ेE माना जाएगा। जोन ''1'' जोिखममय >Eे से परे चार(cid:16)
ओर स े8.0 मीटर तक क(cid:28) भावी दरू ी वाला >ेE जोन ''2'' जोिखममय >ेE माना जाएगा।
((((4444)))) ककककूूूूपपपप सससस""""ववववRRRRससससगगगग (cid:16)(cid:16)(cid:16)(cid:16)चचचचााााललललनननन ::::
वेल पbू लग तथा इस (cid:20)कार के अ(cid:25)य कूप सzवbसग से सभी (cid:4)दशाu म8 10.0 मीटर िEc या तक के दायरे
वाला >ेE जोन ''2'' जोिखममय >ेE माना जाएगा।
पर(cid:25)त ,ु जहा ँ स(cid:18)प पर सले र मौजूद ह ै वहा ँ स(cid:18) प पर ि;थत सेलर के भीतर का >ेE जोन ''1''
जोिखममय >ेE होगा तथा सले र अथवा स(cid:18) प के (cid:4)कनारे से >िै तज (cid:4)दशा म8 3.0 मीटर तक तथा सले र या
स(cid:18)प के ऊपर उदa (cid:4)दशा म 80.5 मीटर का >ेE जोन ''2'' जोिखममय >ेE माना जाएगा।
((((5555)))) गगगगससैैससैै ववववटट33टट33 ::::
गैस व8ट के खुल े िसरे स े सभी (cid:4)दशाu म 8 1.5 मीटर िEc या तक का >ेE जोन ''1'' जोिखममय >ेE माना
जाएगा तथा इस >ेE स ेबाहर 3.0 मीटर िEc या तक के >ेE को जोन ''2'' जोिखममय >ेE माना जाएगा।
((((गगगग)))) ततततललेेललेे एएएएवववव ंं ंंगगगगससैैससैै (cid:16)(cid:16)(cid:16)(cid:16)सससस++ंं++ंं कक कक ररररणणणण औऔऔऔरररर भभभभडडंंडडंं ााााररररणणणण उउउउपपपप++++कक कक रररर ::::
(1) तेल एवं गैस िवभाजन वेसल, अि(cid:133) वेसल, िडहाई[टे र, ; टेबलाईजर, हाइ[ोकाबOन -रकवरी यिु नट:-
(i) (cid:4)कसी भी तेल गैस िवभाजन बेसल, अि(cid:133) वेसल, िडहाइ[टे र, ; टेबलाईजर और हाइ[ोकाबOन
-रकवरी यिु नट से 3.0 मीटर क(cid:28) िEc या के भीतर का >ेE जोन ''2'' जोिखममय >ेE माना जाएगा।
(ii) भ-ू तल के नीचे कोई भी p8च या ग त O जोन ''1'' जोिखममय >Eे होगा और (cid:4)कसी p8च या ग त O के
(cid:4)कनारे से >िै तज (cid:4)दशा म8 3.0 मीटर तक का >ेE और p8च या ग त O के ऊपर 0.5 मीटर उदa भाग जोन ''2''
जोिखममय >ेE होगा।
((((2222)))) गगगगससैैससैै ववववटट]]टट]] ::::
व8ट के मु)त िसरे स े सभी (cid:4)दशाu म 8 िव; तृत 1.5 मीटर िEc या के भीतर का >ेE जोन ''1'' जोिखममय >ेE
होगा और इस >ेE से परे व8ट स े3.0 मीटर िEc या के भीतर का >ेE जोन ''2'' जोिखममय >ेE होगा।
((((3333)))) ििििननननममममooooचचचचनननन ववववॉॉॉॉHHHHवव वव ::::¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 57
िनमvचन वॉ(cid:6)व के उ स जOन से कम स े कम 3.0 मीटर क(cid:28) िEcय ा के भीतर सभी (cid:4)दशाu म8 फैला %आ >ेE
जोन ''2'' जोिखममय >ेE होगा, बशत w (cid:4)क, िनमvचन वॉ(cid:6) व स े उ स जOन के सीध े पथ म8 कोई भी िवjतु
उप;क र नहq हो।
((((4444)))) ििििपपपपगगगग \\\\ैैपपैैपप ::::
िपग लाउंbचग/-रसीbवग pेप के सभी (cid:4)दशाu म8 1.5 मीटर क(cid:28) िEc या के भीतर तक का >ेE जोन ''1''
जोिखममय >ेE होगा। जोन ''1'' जोिखममय >ेE स ेपरे सभी (cid:4)दशाu म 8 3.0 मीटर क(cid:28) िEc या तक का >ेE
जोन ''2'' जोिखममय >ेE होगा।
((((5555)))) पपपपपपंंपपंं ययययाााा गगगगससैैससैै सससस(cid:18)(cid:18)(cid:18)(cid:18) पप पपीीीीडडडडकककक ::::
(i) जहाँ cव लनशील तरल पदाथ O या (cid:4)कसी गैस स(cid:18) पीडक को सभं ालने वाला कोई प(cid:18) प कूप रिहत
संवाितत शेड के नीचे या मु) त वातावरण म 8 अवि;थत ह,ै वहाँ पंप या संपीडक से सभी (cid:4)दशाu म8 3.0
मीटर तक का >ेE जोन ''2'' जोिखममय >ेE होगा।
(ii) जहाँ कोई पंप या सपं ीडक पयाOR त (cid:21)प से संवाितत भवन म 8 अवि;थत होता ह,ै िनकास के 1.5
मीटर भीतर का >ेE सिहत ऐस ेिबb(cid:6)डग का संपणू O आंत-रक भाग जोन ''2'' जोिखममय >ेE होगा।
(iii) भ-ू तल के नीच े ग त ,O स(cid:18) प, p8च जोन ''1'' जोिखममय >ेE होगा और खाई और ग त O के (cid:4)कनारे स े
>ैितज (cid:4)दशा म 8 3.0 मीटर तक और ग तO, स(cid:18) प या p8च के उदa 0.5 मीटर तक का >ेE जोन ''2''
जोिखममय >ेE होगा।
((((6666)))) भभभभडडंंडडंं ााााररररणणणण टटटटंकंकंकंक---- ::::
(i) Rल ान छत टंक(cid:28) क(cid:28) प-रि;थित म8, R लावी छत और घेरा के भीतर घेरा के ऊपरी तल तक का >ेE
जोन ''1'' जोिखममय >ेE होगा और जोन जोिखममय >ेE के बाहर तथा टंक(cid:28) से सभी (cid:4)दशाu म8 4.5
मीटर क(cid:28) िEcय ा तक और इसके ऊपर जोन ''2'' जोिखममय >ेE होगा। डाईक के मामल े म 8 जोन ''2''
जोिखममय >ेE का िव;त ार उदa (cid:21)प से डाईक के (cid:20)ाकृितक घेरा तक और >िै तज (cid:21)प स े डाइक के भौितक
सीमा तक होगा।
(ii) अटल छत टंक(cid:28) के मामले म,8 टंक(cid:28) के भीतर का >ेE और सभी िववृत, िजसम8 J वासी वॉ(cid:6) व, िडप
हचै , थीफ हचै और सरु >ा वॉ(cid:6) व शािमल ह,H से 1.5 मीटर क(cid:28) िEc या के भीतर का >ेE जोन ''1'' जोिखममय
>ेE होगा। जोन ''1'' जोिखममय >ेE के बाहर और टHक सले स े सभी (cid:4)दशाu म8 3.0 मीटर िEc या क(cid:28)
िEcय ा तक और टHक का छत जोन ''2'' जोिखममय >ेE होगा। डाईक के मामल े म8 डाईक म 8 स(cid:18) प जोन ''1''
जोिखममय >ेE होगा और डाईक क(cid:28) ऊँचाई तक उदa (cid:21)प म 8 और >ैितज (cid:21)प म8 डाईक के (cid:20)ाकृितक घरे ा
तक िव;त ृत >ेE जोन ''2'' जोिखममय >ेE होगा।
((((घघघघ)))) ससससााााधधधधााााररररणणणण ::::
जहाँ भी सै(cid:18)प bलग )ल ॉक और Gल ीड-ऑफ वॉ(cid:6) व लगाया जाता ह,ै वहा ँ िनमुO)त िब(cid:25) द ुस े सभी (cid:4)दशाu म 8 1.5 मीटर
तक का >ेE जोन ''2'' जोिखममय >ेE होगा।
[फा. स.ं एस-66012/01/2008-आई.एस.एच-II (Vol. III)]
पाथ O(cid:20)ितम िमEा, (cid:20)धान Nम एवं रोजगार सलाहकार
MINISTRY OF LABOUR AND EMPLOYMENT
NOTIFICATION
New Delhi, the 24th June, 2016
G.S.R. 632 (E).— The following draft of certain regulations which the Central Government proposes to make,
in exercise of the powers conferred by section 57 of the Mines Act, 1952 (35 of 1952), on the recommendations of the
Committee constituted under section 12 of the said Act, and in supersession of the Oil Mines Regulations, 1984, except
as respects things done or omitted to have been done before such supersession, is hereby published as required by sub-58 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
section (1) of section 59 of the said Act for the information of all persons likely to be affected thereby; and notice is
hereby given that the said draft rules will be taken into consideration after the expiry of a period of three months from the
date on which the copies of the Official Gazette in which this notification is published are made available to the public;
Objections or suggestions, if any, may be addressed to the Joint Secretary to the Government of India, Ministry
of Labour and Employment, Shram Shakti Bhawan, Rafi Marg, New Delhi- 110001.
The objections and suggestions, which may be received from any person with respect to the said draft
regulations before the expiry of the period specified above, will be considered by the Central Government.
DRAFT OIL MINES REGULATIONS, 2016
CHAPTER - I
PRELIMINARY
1. Short title, commencement and application. - (1) These regulations may be called the Oil Mines
Regulations, 2016.
(2) They shall apply to every oil mine, including natural gas mine.
(3) They shall come into force on the date of their final publication in the Official Gazette.
2. Definitions.– In these regulations, unless the context otherwise requires-
(1) “Act” means the Mines Act, 1952 (35 of 1952);
(2) “acidising” means the treatment of hydrocarbon bearing formation by chemical reaction with acid in
order to increase productivity or injectivity;
(3) “annular space” means the space surrounding pipe suspended in the well, in which the outer wall of the
annular space may be an open hole or it may be a string of larger pipe;
(4) “bleed” means to drain off liquid or gas generally through a valve; to bleed off means a controlled
release of the pressure of a well or the pressurised equipment;
(5) “blowout” means uncontrolled sudden violent escape of fluid(s) from a well;
(6) “blowout preventer” means a device attached above the well head to control pressure and to prevent
uncontrolled escape of fluids from the annular space between tubing and casing or between drill pipe and
casing or between wire line and tubing or to shut-off the well if no drill pipe or tubing is in the hole, in case a
kick or blowout occurs;
(7) “casing” means a steel pipe lowered into a well during drilling to prevent caving of the wells and to
hold back fluids from entering the well;
(8) “casing line” means steel wire rope used for lowering and raising of pipes in the well through crown
block and travelling block;
(9) “cat-line” means a rope used to lift a pipe, drilling tool and other equipment from ground or base, pipe
rack, tool platform or cat-walk on to the derrick floor;
(10) “cat-head” means a device mounted on the draw-works for making or breaking pipe connections or
for operation of cat-line with the help of power from draw-works;
(11) “cat-walk” means a ramp giving access to rig floor for drill pipe, tubing, casing and drilling or other
tools;
(12) “cellar” means an excavation under the derrick to provide space for items or equipment at the top of
the well which also serves as a pit to collect drainage of water and other fluids under the floor for subsequent
disposal;
(13) “cementing” means an operation by which cement and water mixture is pumped down through the
casing in such a way that it fills the space between casing and walls of the well to a pre-determined height
above the bottom of the well;
(14) “christmas tree” means the valves and fitting assembled at the top of a well head to control the flow
of the fluids;
(15) “coal bed methane” means a natural gas trapped in a coal seam or adjacent strata;
(16) “cold work” means an activity which does not produce adequate heat to ignite a flammable air-
hydrocarbon mixture or a flammable substance;
(17) “competent person” in relation to any work or any machinery, plant or equipment means a person
who has been duly appointed in writing by the manager as a person competent to supervise or perform that
work, or to supervise the operation or maintenance of that machinery, plant or equipment, and who is
responsible for the duties assigned to such person;¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 59
(18) “completed well” means a well in which the petroleum bearing formations or effluent disposal
formation is open to the well, complete with equipment installed in the well and at the well-head so that it is
physically able to perform as a petroleum producer, injector or disposal well;
(19) “contractor” means an individual, association of individuals, company, firm, local authority or local
body who on contract basis provides for the services or operations in an oil or gas mine, and includes a sub-
contractor;
(20) “crown block” means a multi-sheaved assembly mounted at the top of the derrick or mast and used in
conjunction with a travelling block for raising and lowering of equipment in drilling and servicing a well;
(21) “day light hours” means the period from sunrise to sunset;
(22) “deputy manager” means a person possessing qualifications as provided under these regulations and
who is appointed in writing by the owner, agent or manager to assist the manager in the control,
management, direction and supervision of the mine or part thereof, and who takes rank immediately below
the manager;
(23) “derrick” means a compound latticed structure used over the well for drilling or well servicing
purposes, and includes a mast;
(24) “designer” means an individual, association of individuals, company or institution who designs an oil
or gas mining system, method of oil or gas mining, machinery, plant, equipment, appliance or substances for
use in oil or gas mines;
(25) “District Magistrate” in relation to any mine means the District Magistrate or the Collector or the
Deputy Commissioner, as the case may be, who is vested with the executive powers of maintaining law and
order in the revenue district in which the mine is situated;
(26) “draw-works” means an assembly of shafts, sprockets, chains, pulleys, belts, clutches, catheads or
other mechanical devices, suitably mounted and provided with controls for hoisting, operating and handling
the equipment used for drilling a well or servicing a producing well;
(27) “drilling” means perforation of the earth’s crust by mechanical or other means and includes all
operations for preventing collapse of the sides of such hole or for preventing such hole from being filled with
extraneous material including water;
(28) “drilling rig” means the complete structure and machinery required for drilling purposes at the bore
hole site;
(29) “elevator” means a steel mechanical device used in connection with the hoisting equipment
suspended from the travelling block, for holding in suspension, pipe or rod being lowered into or pulled from
a well;
(30) “emergency-escape device” means an inclined wire line to carry a safety carriage or slide running
from a point above the monkey board to a ground anchor and includes such carriage or slide;
(31) “explosimeter” means an instrument to measure the concentration of flammable gas;
(32) “explosive” shall have the same meaning as is assigned to that term in the Indian Explosives Act,
1884 (4 of 1884);
(33) “flame proof enclosure” shall have the same meaning as defined under the Central Electricity
Authority (Measures Relating to Safety and Electric Supply) Regulations, 2010;
(34) “flammable” means capable of being easily ignited, burning intensely or having a rapid rate of flame
spread;
(35) “flash point” means the lowest temperature at which any petroleum liquid yields vapour in sufficient
concentration to form an ignitable mixture with air and gives a momentary flash on application of a small
pilot flame under specified conditions of test as per IS: 1448 (Part-I) or its revised version;
(36) “flare” means a flame used to dispose off gas as per process requirement;
(37) “floor block” means a single sheave pulley or snatch block fixed at or near floor level by means of
which the direction of pull on a rope can be varied;
(38) “form” means a form prescribed by the Chief Inspector under these regulations;
(39) “fracturing” means the process of forcing a fluid in the sub-surface strata with the purpose of
enhancing flow passages;
(40) “gas” means the vapour state of the hydrocarbons occurring in or derived from petroleum and
includes natural gas;
(41) “gas free” means an environment in which-60 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(i) the percentage of flammable gas does not exceed the limit specified under the Central Electricity
Authority (Measures Relating to Safety and Electric Supply) Regulations, 2010 for cutting off power
supply in case of existence of such gas;
(ii) the percentage of oxygen is not less than nineteen, and
(iii) noxious gases are within permissible limits specified as per Oil Industry Safety Directorate
Standard, OISD-STD-114 or its revised version;
(42) gas well” means a well which is on continuous production from a gas bearing zone or a well in which
casing is run for continuous production of gas;
(43) “hazardous area” means an area where hazardous atmosphere exists or is likely to occur;
(44) “hazardous atmosphere” means an atmosphere containing any flammable gas in a concentration
capable of ignition or containing noxious gases beyond permissible limits specified as per Oil Industry
Safety Directorate Standard, OISD-STD-114 or its revised version;
(45) “hot work” means an activity that can produce a spark or flame or other source of ignition having
adequate energy to cause ignition, where the potential for flammable vapours, gases, or dust exist;
(46) “installation” means any fixed set up or structure or vessel or part thereof which is maintained within
the mine or is to be established therein in connection with exploration or with exploitation of petroleum or
natural gas with a view to such exploitation, production, storage or transport thereof;
(47) “installation manager” means a person appointed in writing by the owner, agent or manager of the
mine to be in-charge of and responsible for all operations and activities on or in connection with the
installation;
(48) “ionising radiation” means emission due to self-disruptive fission of atomic nucleus of any
radioactive substance which is hazardous to health;
(49) “kick” means a sudden pressure-surge of short duration caused by influx of formation fluids entering
well being drilled;
(50) “kelly cock” means a valve installed between swivel and kelly or kelly and drill pipe to control
pressure, should a high pressure backflow of fluids occur, and to keep the pressure off the swivel and rotary
hose;
(51) “lifting appliance” means a combined unit with or without horizontal movement used for hoisting or
lowering cargo;
(52) “lifting gear” means every type of equipment placed on loading hook of a lifting appliance and
includes container, steel basket, lifting yoke, multi slings or chain or wire;
(53) “living accommodation” means the part of the installation comprising of personnel living rooms,
conference room, galley and offices attached thereto;
(54) “lubricator” means a device fitted on top of a christmas tree and consists of a pressure sealing device
at its upper end so as to afford an effective seal on the wire-line or other connection attached to tools run into
the well;
(55) “machinery” means -
(a) any stationery or portable engine, air or gas compressor, boiler or steam apparatus; or
(b) any such apparatus, appliance or combination of appliances or combination intended for
developing, storing, transmitting, converting or utilising energy; or
(c) any such apparatus, appliance of appliances, if any power developed, stored, transmitted,
converted or utilised thereby is, under or intended for use in connection with mining operations;
(56) “major accident” means an occurrence including in particular, a major emission of fire or explosion
from uncontrolled developments in the course of drilling and for production, storage, handling or
transportation of petroleum or machinery or owing to natural events leading to serious effects (both
immediate and delayed as well as inside or outside the installation) causing or likely to cause substantial loss
of life or property;
(57) “major fire” means any incident of fire not extinguished within fifteen minutes;
(58) “manager” means a manager appointed under regulation 14;
(59) “manufacturer” means an individual, association of individuals, company or institution who
manufactures machinery, plant, equipment, appliance or substances for use in oil or gas mines;
(60) “monkey board” means a movable or fixed platform installed above derrick floor on which work-
persons stand to handle pipes or other equipment racked on the derrick;¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 61
(61) “mud” means a liquid that is circulated through the well during drilling or work-over operations or in
case of temporary closure so that the hydrostatic pressure of the fluid column over-balances the formation
pressure to prevent leakage of petroleum at the wellhead;
(62) “mud tank” means the reservoir or tank through which the drilling and mud is cycled to allow sand
and fine sediments to settle out where additives are mixed with mud and where the fluid is temporarily
stored before being pumped back into the well;
(63) “mud-pump” means a pump used to circulate mud or well fluid on a drilling rig or work over rig;
(64) “official” means a person appointed in writing by the owner, agent or manager to perform duties of
supervision in a mine or part thereof and includes deputy manager, installation manager, safety officer, fire
officer and surveyor;
(65) “oilfield” means oilfield as defined in the Oilfields (Regulation and Development) Act, 1948 (53 of
1948);
(66) “oilfield pipelines” means a pipeline or pipeline network used for transporting petroleum or other
commodities in an oilfield;
(67) “oil well” means a well which is producing or is capable of producing petroleum;
(68) “out-line” means a rope used to carry pipes, drilling tools or other equipment from a derrick to the
derrick walk or other location outside the derrick;
(69) “petroleum” means naturally occurring hydrocarbons in a free state whether in the form of natural gas
or in a liquid, viscous or solid form but does not include helium occurring in association with petroleum;
(70) “pipe-rack” means a structure located adjacent to but usually below the level of the rig floor, on
which pipe or casing may be stored or racked;
(71) “platform” means a working space for persons, elevated above the surrounding floor or ground or sea
for the operation of machinery and equipment;
(72) “racked” refers to tubular goods or rods standing in the derrick or mast or stored on a pipe rack;
(73) “racking platform” means a platform in the derrick or mast at an elevation where a derrick man is
normally required to handle stands being racked;
(74) “railway” means a railway as defined in the Railways Act, 1989 (24 of 1989);
(75) “Regional Inspector” means the inspector of mines in-charge of the region or local area or areas in
which the mine is situated or the group or class or mines to which the mine belongs, over which he exercises
his powers under the Act;
(76) “rigging-up” means an act of assembling a drilling or work-over rig and auxiliary equipment prior to
commencement of drilling or work-over operation and includes jacking up and positioning;
(77) “river” means any stream or current of water whether seasonal or perennial and includes its banks
extending up to the highest known flood level;
(78) “rotary hose” means the hose that conducts the circulating fluid from the stand pipe to the swivel and
kelly;
(79) “rotary table” means a power operated turn-table on the rig floor primarily used for rotating the
drilling string;
(80) “safety management system” means, collectively, those elements in the management system that are
applied to identify or assess or control a hazard or recover therefrom;
(81) “Schedule” means the Schedule appended to these regulations;
(82) “stand(s)” means sections of pipe consisting of two or more made-up lengths which are racked in a
derrick;
(83) “standard railing” means a vertical barrier erected along exposed edges of a floor opening, wall
opening, ramps, platform or walk-way to prevent fall of persons;
(84) “sub-structure” means the foundation on which normally the derrick and engines are placed;
(85) “supplier” means an individual, association of individuals, company or institution who supplies a
technology, machinery, plant, equipment, appliance or substance(s) for use in oil or gas mines;
(86) “surface casing” means casing to cover unconsolidated formations, to provide protection against
shallow gas flow, seal off water bearing formations, protect fresh water sands from contamination, case-off
lost circulations zones and to provide structural support for the well head;
(87) “swabbing” means the operation of activation on a wire-line to bring well fluids to the surface when
the well does not flow naturally;62 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(88) “toe board” means a vertical barrier at floor level erected along exposed edges of a floor opening,
wall opening, platform, walk-way or ramp to prevent falls of materials;
(89) “toxic dust or gas” means any dust or gas which can cause a reversible or irreversible disturbance of
the normal physiological processes of one or more bodily systems;
(90) “travelling block” means a multi-sheaved pulley block used in conjunction with the fixed crown
block for raising and lowering the drilling string, casing, tubing rods and other tools;
(91) “well” means a hole in the earth crust-
(a) made or being made by drilling, boring or in any other manner from which petroleum or natural
gas are obtained or obtainable or for the purpose of obtaining petroleum or natural gas;
(b) used, drilled or being drilled for the purpose of water injection or for injecting natural gas, air,
water or any other substance into underground formation;
(92) “wellhead” means an assembly on top of the well casing strings with outlets and valves for
controlling flow of fluids;
(93) “well perforating” means perforating well casing or tubing or cement to provide flow passage for
production or for testing or well activation purposes;
(94) “well servicing” means one or more type of remedial operations in well with the intention of restoring
or increasing production without involving any work-over rig or outfit;
(95) “work-over” means one or more of a variety of remedial operations on a well with the intention of
restoring or increasing production;
(96) ‘zone “0” hazardous area’ means an area in which hazardous atmosphere is continuously present;
(97) ‘zone “1” hazardous area’ means an area in which a hazardous atmosphere is likely to occur under
normal operating conditions;
(98) ‘zone “2” hazardous area’ means an area in which a hazardous atmosphere is likely to occur only
under abnormal operating conditions.
CHAPTER-II
RETURNS, NOTICES AND PLANS
3. Notice of opening.- (1) The notice of commencement of any mining operation under section 16 of the Act
shall be submitted in the Form and method specified by the Chief Inspector for the purpose, accompanied by a
plan showing the geographical boundaries of the mine including locations of the installations and other prominent
and permanent surface features and a copy of Safety Management Plan prepared under regulation 131 to the Chief
Inspector and to the Regional Inspector.
(2) When a mine has been opened the owner, agent or manager shall communicate the actual date of
opening to the Chief Inspector, the Regional Inspector and the District Magistrate:
Provided that in case of drilling of a new well or performing work over activity in a well of a mine in mining
area, there is no need for submitting a fresh notice under this regulation, but at the beginning of the year, a drilling
and work over plan in a mine shall be submitted and subsequently actual wells drilled with respect to drilling and
work over plan shall be intimated to Regional Inspector along with annual return.
4. Annual returns.- (1) On or before the 1st day of February every year, the owner, agent or manager shall
submit to the Chief Inspector, the Regional Inspector and District Magistrate annual returns in respect of
preceding year in the Form and method specified by the Chief Inspector for the purpose.
(2) If a mine is abandoned or closed or working(s) thereof is discontinued over a period exceeding four
months or if a change occurs in the ownership of a mine, the returns required under sub-regulation (1) shall be
submitted within thirty days of abandonment or closure or change of ownership or within five months of
discontinuance, as the case may be.
5. Notice of abandonment, closure or discontinuance or reopening of mine.-(1) When it is intended to
abandon or close a mine or discontinue a mine or working(s) thereof for a period exceeding four months, the
owner, agent or manager shall submit a notice in the Form and method specified by the Chief Inspector for the
purpose, to the Chief Inspector, the Regional Inspector and District Magistrate stating the reasons for such
abandonment or closure or discontinuance and the number of persons likely to be affected thereby, not less than
thirty days before such closure or discontinuance:
Provided that in an unforeseen circumstance where the mine is abandoned or closed or discontinued for a
period exceeding four months before the notice is given, the same shall be submitted forthwith.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 63
(2) When a mine is abandoned or closed or working(s) thereof has been discontinued for a period
exceeding four months, the owner, agent or manager shall, within fourteen days of closure or expiry of such
discontinuance, submit to the Chief Inspector, the Regional Inspector and the District Magistrate, notice in the
Form and method specified by the Chief Inspector for the purpose.
(3) When it is intended to reopen a mine after abandonment, closure or discontinuance for a period
exceeding four months, the owner, agent or manager shall, not less than thirty days before resumption of mining
operations, give to the Chief Inspector, the Regional Inspector and the District Magistrate, notice in the Form and
method specified by the Chief Inspector for the purpose.
(4) When a mine has been reopened, the owner, agent or manager shall forthwith communicate the actual
date of reopening to the Chief Inspector, the Regional Inspector and the District Magistrate.
6. Notice of change in ownership and appointments such as agent and manager. - (1) (a) When a change
occurs in the name or ownership of a mine or in the address of the owner, the owner, agent or manager shall,
within fourteen days from the date of the change, submit to the Chief Inspector and the Regional Inspector a
notice in the Form and method specified by the Chief Inspector for the purpose:
Provided that where the owner of a mine is a firm or other association of individuals, a change –
(i) of any partner in the case of a firm;
(ii) of any member in the case of an association;
(iii) of any director in the case of a public company; or
(iv) of any shareholder in the case of a private company,
shall also be intimated to the Chief Inspector and the Regional Inspector, within fourteen days from the date of
such change.
(b) When the ownership of a mine is transferred, the previous owner or his agent shall make over to the
new owner or his agent, within a period of fourteen days of the transfer of ownership, all plans, reports,
registers and other records maintained in pursuance of the Act and the regulations, or orders made
thereunder, and all correspondence relating to the working of the mine relevant thereto; and when the
requirements of this clause have been duly complied with, both the previous and the new owners or their
respective agents shall forthwith inform the Chief Inspector and the Regional Inspector in writing.
(2) When any appointment is made of an agent or manager or when the employment of any such person is
terminated or any such person leaves the said employment, or when any change occurs in the address of any agent
or manager, the owner, agent or manager shall, within fourteen days from the date of such appointment,
termination or change, submit to the Chief Inspector and the Regional Inspector a notice in the Form and method
specified by the Chief Inspector for the purpose.
(3) The manager of every mine shall maintain all documents pertaining to the appointment and termination
of every deputy manager, installation manager, safety officer, fire officer and other officials and competent
persons in respect of his mine and all such documents relating thereto shall be kept available in the office of the
mine.
7. Notice of dangerous occurrence or accident.– (1) When there occurs in or about a mine,
(a) an accident causing loss of life or serious bodily injury in connection with any mining operation; or
(b) a readily identifiable event with potential to cause an injury to persons at work, hereinafter referred
to as “dangerous occurrence”, such as –
(i) an explosion or ignition;
(ii) a blowout;
(iii) an outbreak of major fire ;
(iv) a bursting of any pipeline or equipment containing petroleum, steam, compressed air or other
substance at a pressure greater than the atmospheric pressure;
(v) a major uncontrolled emission of petroleum or chemical spillage;
(vi) a breakage or fracture of any essential part of draw-works, casing line or failure of emergency
brake whereby the safety of persons may be endangered
(vii) a breakage, fracture or failure of any essential part of any derrick, machinery or apparatus
whereby the safety of persons may be endangered;
(viii) an influx of noxious gases;
(ix) any accident due to explosives,
the owner, agent or manager shall forthwith inform the Regional Inspector about the occurrence by telephone, fax, e-
mail or by special messenger; and shall also, within twenty four hours of every such occurrence, give notice thereof in
the Form and method specified by the Chief Inspector for the purpose, to the District Magistrate, the Chief Inspector64 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
and the Regional Inspector and in the case of an accident mentioned in clause (a), also to the competent authority for
payment of compensation:
Provided that in case such notice is sent by e-mail, it shall be immediately followed by fax or letter.
(2) The owner, agent or manager shall simultaneously exhibit a copy of the notice on a special notice board at
the office of the mine for a period of not less than fourteen days from the date of such exhibition.
(3) When an accident causing loss of life, serious bodily injury or burn injury occurs in or about a mine in
connection with the generation, storage, transformation, transmission, supply or use of electrical energy, the owner,
agent or manager shall also forthwith inform the Inspector of Mines (Electrical) by telephone, fax, e-mail or by
special messenger:
Provided that in case such notice is sent by e-mail, it shall be immediately followed by fax or letter.
(4) If death results from any injury already reported as serious under sub-regulation (1) or if an injury other than
the serious injury becomes serious, the owner, agent or manager shall within twenty four hours of his being informed
of the same, give notice thereof to the District Magistrate, the Chief Inspector, the Regional Inspector and to the
competent authority for payment of compensation and, if such death or injury is connected with any reason as
specified under sub-regulation (3), also to the Inspector of Mines (Electrical).
(5) In respect of every persons killed or injured as above, the owner, agent or manager shall send particulars in
the Form and method specified by the Chief Inspector for the purpose, within seven days of the occurrence, and also
within fifteen days of the injured person returning to duty.
8. Notice of disease.- Where any person employed in a mine contracts any disease notified by the Central
Government under section 25 of the Act, the owner, agent or manager shall within three days of his being informed of
the disease, give notice thereof in the Form and method specified by the Chief Inspector for the purpose, to the Chief
Inspector, the Regional Inspector, the Inspector of Mines (Medical), the District Magistrate, and to the competent
authority for payment of compensation.
9. Plans.- (1) The owner, agent or manager of every mine shall keep the following plans accurate and up-to-
date, namely :-
(a) a key plan with reference to the national grid showing the area duly demarcated in which
operations for winning of petroleum or natural gas and ancillary operations are carried on;
(b) a surface plan showing the location of all installations including wells, production facilities
and pipe lines with their access routes, railways, power transmission lines, public roads, buildings or other
permanent structures not belonging to the owner, rivers and water courses within the mine:
Provided that the Chief Inspector may, by an order in writing, require to keep a plan extending
to such distance from the mine boundary, as he may specify therein.
(2) Every plan maintained in accordance with the provisions of these regulations shall-
(a) show the name of the mine and of the owner and the purpose for which the plan is prepared ;
(b) show the true north or magnetic meridian and the date of the later;
(c) unless otherwise provided, be on a scale having a representative factor of –
(i) 50,000: 1, in case of key plans;
(ii) 20,000:1, in case of plans such as showing location of oil wells, gas wells and other
installations mentioned in clause (b) of sub-regulation (1):
Provided that the Chief Inspector may by an order in writing and subject to such conditions as he may
specify therein, permit or require the plans to be prepared on any other suitable scale;
(d) be properly inked in on durable paper or a polyester tracing film and be kept in good condition or
in electronic form:
Provided that where in a mine the plans are maintained in electronic form, the owner, agent and
manager shall ensure that the same are digitally signed and not liable to alteration or tampering and secured in
such a manner as to facilitate retrieval by owner, agent, manager and the Chief Inspector or an Inspector;
(e) be accurate and maintained up-to-date and not later than twelve months.
All plans required to be maintained under these regulations or any order made thereunder shall be kept
available for inspection in the office of the mine and a list thereof shall be maintained.
10. Preparation of plans, etc., by surveyor.- Every plan or section required to be maintained under these
regulations or any orders made thereunder shall be prepared by or under the personal supervision of a surveyor
and shall carry thereon a certificate by him to the effect that the plan or section or part thereof is correct and
shall be signed and dated by the surveyor and counter-signed and dated by the manager on every occasion that
the plan or section is brought up-to-date.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 65
CHAPTER – III
INSPECTORS, MANAGEMENT AND COMPETENT PERSONS
11. Qualifications of Inspectors.- (1) No person shall be appointed as Chief Inspector unless he holds a
degree in mining engineering of an educational institution approved by the Central Government.
(2) No person shall be appointed as Inspector unless he holds a degree in mining or petroleum engineering of
an educational institution approved by the Central Government:
Provided that -
(i) in relation to electrical machinery installed in mines, a person holding a degree in electrical
engineering of an educational institution approved by the Central Government may be so appointed;
(ii) in relation to other machinery or mechanical appliances installed in mines, a person holding a degree
in mechanical engineering of an educational institution approved by the Central Government may be so
appointed;
(iii) in relation to the provisions of the Act and of the rules and regulations which relate to matters
concerning the health and welfare of persons, a person holding an bachelor of medicines and bachelor of surgery
degree may be so appointed.
12. Definition of mine for purposes of this Chapter.- For the purpose of this Chapter, all borings,
boreholes, oil wells and accessory petroleum conditioning plants including gas wells, workshops, installations,
and pipe conveying petroleum within an area duly demarcated by the owner or agent shall be deemed to constitute
one mine:
Provided that where special conditions exist, the Chief Inspector may, by an order in writing and subject to
such conditions as he may specify therein, permit or require the division of any one such area into two or more
separate mines.
13. Appointment of agent.-(1) The owner of a mine shall submit in writing to the Chief Inspector and
the Regional Inspector, a statement showing names and designation of every person authorised to act on behalf of
the owner in respect of management, control, supervision and direction of the mine.
(2) The statement shall also show the responsibility of every person in respect of matters for which such
person is authorised to act on behalf of the owner.
(3) Every such person shall be deemed to be agent for the mine or group of mines, as the case may be, in
respect of the responsibility as specified in such statement.
(4) The statement specified under sub-regulation (1) shall be submitted within one month from the date
of opening or reopening of a mine or a group of mines, as the case may be:
Provided that in case of a mine or group of mines, as the case may be, which has already been opened, such
statement shall be submitted within one month of coming into force of these regulations.
(5) Any change, addition or alteration in the names or other particulars of the statement referred to in sub-
regulation (1), shall be reported in writing to the Chief Inspector and the Regional Inspector within fourteen days
from the date of such change, addition or alteration.
14. Qualification and appointment of managers.-(1) No mine shall be opened, worked or re-opened
unless there is a manager of the mine, being a person duly appointed.
(2) No person shall act or continue to act, or be appointed as manager of a mine under sub-regulation (1),
unless he holds a degree or diploma in engineering or post-graduation in physics or geophysics or geology or
chemistry of an educational institution recognized by the Central Government and has experience in the
management and supervision of operations in oil mines for a period of not less than fifteen years in case of
diploma in engineering and ten years in other cases.
(3) Where by reason of absence or for any other reason, the manager is unable to perform his duties under
the Act, and the regulations or bye-laws and orders made thereunder, the owner or agent shall authorise in writing
a person possessing the qualifications under sub-regulation (2) to act as manager.
(4) The person so authorised to act as manager shall during the period of such authorisation have the same
responsibility, discharge the same duties, and be subject to the same liabilities as the manager.
15. Qualifications and appointment of deputy managers.-(1) At every mine, having more than two
installations or part thereof, the manager shall be assisted by deputy manager(s) in the proportion of one
additional deputy manager for every eight additional installations or part thereof.66 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) No person shall act or continue to act, or be appointed as deputy manager under sub-regulation (1),
unless he holds a degree or diploma in engineering or post-graduation in physics or geophysics or geology or
chemistry of an educational institution recognised by the Central Government and has experience in the
management and supervision of operations in oil mines for a period of not less than eight years in case of diploma
in engineering and five years in other cases.
16. Qualification and appointment of installation manager.-(1) Every installation in a mine shall be
placed under the charge of an installation manager appointed by the owner, agent or manager:
Provided that, where in a mine, the owner, agent or manager is of the opinion that the size, nature, location and
extent of certain installations are such that one installation manager can perform his duties in proper manner for
more than one installation, he may appoint one installation manager to hold charge of more than one installation
recording justifications thereof and clearly specifying the area of jurisdiction in every such case.
(2) Installation manager(s) appointed under sub-regulation (1) shall hold degree or diploma in engineering
or a degree in science of an educational institution recognised by the Central Government and has experience in
the management or supervision of operations in oil mines for a period of not less than five years in case of
diploma in engineering and degree in science; and two years in case of degree in engineering.
17. Qualification and appointment of safety officer.-(1) The owner, agent or manager of every mine
shall appoint a safety officer to assist the manager in promotion of safety and occupational health at work:
Provided that, where in a mine, the owner, agent or manager is of the opinion that, due to large size of the
mine, or due to large number of installations in the mine, or due to other conditions existing in the mine, it is not
possible for one safety officer to attend to his duties effectively by himself, the owner, agent or manager shall
appoint such additional number of safety officers, clearly specifying their areas of jurisdiction, as may be adequate
in carrying out duties effectively under these regulations.
(2)The safety officer(s) appointed under sub-regulation (1) shall hold degree or diploma in engineering; or
degree in science; or degree in industrial safety of an educational institution recognised by the Central
Government or post-graduate diploma in industrial safety from Regional Labour Institute and has experience in
the management or supervision of operations in oil mines for a period of not less than eight years in case of
diploma in engineering and degree in science; and five years in other cases.
18. Qualification and appointment or authorisation of surveyors.- At every mine a person holding
degree or diploma mining or civil engineering of an educational institution recognised by the Central Government
or certificate in surveying issued by Institution of Surveyors or surveyor’s certificate issued under the Act shall be
appointed or authorised as surveyor to assist the mines manager as and when required and for carrying out the
survey, levelling and for preparing plans and sections as required under these regulations and the orders made
thereunder.
19. Qualification and appointment of fire officer.-(1) The owner, agent or manager of every mine shall
appoint a fire officer for fire fighting and to assist the manager on fire prevention measures:
Provided that, where in a mine, the owner, agent or manager is of the opinion that, due to large size of the
mine, or due to large number of installations in the mine, or due to other conditions existing in the mine, it is not
possible for one fire officer to attend to his duties effectively by himself, the owner, agent or manager shall
appoint such additional number of fire officers, clearly specifying their areas of jurisdiction, as may be adequate
in carrying out duties effectively.
(2) No person shall be appointed as fire officer unless he:
(a) holds degree or diploma in fire and safety engineering of an educational institution
recognized by the Central Government and having experience in dealing and management of fire services
for a period of one year in case of degree or two years in case in diploma; or
(b) holds degree or diploma in engineering or degree in science and shall also have undergone
divisional officers course of an educational institution recognised by the Central Government and having
experience in dealing and management of fire services for a period of one year in case of degree or two
years in case in diploma; or
(c) has undergone station officer’s or sub-officer’s course from an institute specified by the
Chief Inspector for the purpose and having experience in dealing and management of fire services for a
period of with ten years.
20. Qualification and appointment or authorisation of competent persons for well perforation.-The
owner, agent or manager of every mine shall authorise one or more person(s) to be competent person(s) for handling,
transport and use of explosives meant for well perforation as per Oil India Safety Directorate standard, OISD-STD-
191 or its revised version.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 67
21. Appointment of officials and competent persons.-(1) The owner, agent or manager of every mine
shall appoint such number of competent persons including officials, as is sufficient to secure, during each of the
working shift,-
(a) adequate inspection of the installation and the equipment thereof;
(b) a thorough supervision of all operations at the installation;
(c) the installation, running and maintenance, in safe working order, of all machinery in the mine;
and
(d) the enforcement of the requirements of the Act and these regulations.
(2) It shall be the responsibility of the manager, deputy manager and installation manager to see that the
persons appointed under sub-regulation (1) are competent to perform duties assigned to them:
Provided that no person shall be so appointed unless he is paid by the owner or agent and is answerable
to the manager.
(3) Record of all appointments made under sub-regulation (1) and duties assigned to the competent
persons under sub-regulation (2) shall be maintained by the manager.
22. General management.- (1) The owner, agent and manager shall provide for the safety, health,
welfare, environment and proper discipline of persons employed in the mine.
(2) Except in a case of emergency, no person who is not an official or a competent person shall give,
otherwise than through the manager, instructions to a person employed in a mine, who is responsible to the
manager.
CHAPTER-IV
DUTIES AND RESPONSIBILITIES OF MANAGEMENT, CONTRACTORS,
MANUFACTURERS, COMPETENT PERSONS AND WORKMEN
23. Duties and responsibilities of owner.– (1) The owner of every mine shall ensure that -
(a) all provisions made under the regulations and rules pertaining to oil and natural gas mines framed under the Act
are complied with;
(b) all necessary measures are taken to eliminate or minimise the risks to health and safety of persons employed in
mines;
(c) safety management plan required under these regulations are formulated and implemented in every mine;
(d) emergency plan specific to each mine required under regulation 102 is prepared for implementation in the event of
an emergency;
(e) first aid, appropriate transportation from the workplace and access to appropriate medical facilities is provided to
every person who receives injury or suffers from illness at the workplace;
(f) adequate training and re-training programs and comprehensible instructions on safety and health matters as well as
on the work assigned are provided for workers, at no cost to them; and
(g) all accidents and dangerous occurrences connected with mining operations are investigated and appropriate
actions taken to prevent recurrence.
(2) Where persons engaged in any operation of a mine are likely to be exposed to physical, chemical or biological
hazards, the owner shall ensure that such persons are provided, at no cost to them, with suitable protective equipment,
clothing as necessary and other facilities as required by these regulations.
24. General responsibilities of supplier, manufacturer and designer.- A person who designs, manufactures,
imports, provides or transfers machinery, equipment or substances for use in mines, shall-
(a) ensure that the machinery, equipment or substances do not entail dangers for the safety and health of those
using them correctly;
(b) make available-
(i) information concerning their requirement for the correct installation, maintenance and use of machinery
and equipment and the correct storage and use of substances;
(ii) information concerning the hazards of machinery and equipment, the dangerous properties of hazardous
substances and physical agents or products; and68 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(iii) information on how to eliminate or control risks arising from the identified hazards associated with the
products.
25. Responsibilities of contractor. – (1) A contractor deployed in a mine for any work shall-
(a) establish effective ongoing communication and co-ordination between appropriate levels of
supervisors, officials and senior officials of the mine prior to commencing work, which shall include provisions for
identifying hazards and the measures to eliminate and control risks;
(b) ensure arrangements for reporting work related injuries and diseases, ill-health and incidents among
the contractor’s workers while performing work in the mine;
(c) provide relevant workplace safety and health hazard awareness and training to their workers prior to
commencing work and as the work progresses as necessary; and
(d) ensure compliance of the provisions of the Act and the rules and regulations framed thereunder.
(2) When deploying contractors, the owner, agent and manager shall ensure that-
(a) the same safety and training requirements apply to the contractors and their workers as to the
workers of the establishment;
(b) where required, only such contractors are deployed that have been duly registered or hold licenses;
and
(c) the contract specify safety and health requirements as well as sanctions and penalties in case of non-
compliance and such contract shall include the right for mine officials to stop the work whenever a risk of serious
injury is apparent and to suspend operations until the necessary remedies have been put in place.
26. Duties of persons employed in mines.-(1) Every person shall strictly adhere to the provisions of the Act and
of the regulations and orders made thereunder and to any order or direction issued by the manager or an official with
a view to the safety or convenience of persons, not being in consistent with the Act and these regulations nor shall he
neglect or refuse to obey such orders or directions.
(2) Every person shall be responsible to follow safety directives and be conversant with the safety instructions
issued by the manager, deputy manager or installations manager from time to time.
(3) Before beginning work, every person shall examine his place of work and the equipment that he is to use and
shall forthwith report to his superior any dangerous defect that he may discover.
(4) Every person shall make use of all safeguards, safety devices and other appliances provided for his protection
or the protection of others.
(5) Except in an emergency, no person unless duly authorised shall interfere with, remove, alter or displace any
safety device or other appliance provided for his protection or the protection of others or interfere with any method
or process adopted with a view to avoid accidents and injuries to health.
(6) No person shall, while on duty, throw any stone or other missile with intent to cause injury or fight or behave
in a violent manner nor shall impede or obstruct any other person in the discharge of duties, or offer or render any
service or use any threat, to any other person with a view to prevent the other person from complying with the
provisions of the Act or the regulations, or orders made thereunder or from performing duties faithfully.
(7) No person shall sleep or take rest in a dangerous place such as scaffolds, derrick floor or cranes or in the
vicinity of dangerous or toxic substances, machinery, boilers, vehicles and heavy equipment.
(8) Every person shall wear protective equipment and clothing suited to his duties and to the weather conditions.
(9) Every person receiving any injury or notices any injury in the course of his duty shall, as soon as possible,
report the same to an official or to the competent person in-charge of a first-aid station, who shall arrange for the
necessary first-aid to the injured person.
(10) No person shall, except with the authority of an official, remove or pass through any fence, guard barrier or
gate, or remove any danger signal.
27. Duties and responsibilities of manager.-(1) The manager shall be responsible for overall management,
control, supervision and direction of the mine to ensure that all work is carried out in accordance with the provisions
of the Act and of the regulations and orders made thereunder.
(2) The manager shall ensure that sufficient supply of materials and appliances for the purpose of carrying out the
provisions of the Act, the regulations and orders made thereunder and for ensuring the safety of the mine and persons
employed therein, is always provided at the mine; and if he is not the owner or agent of the mine, he shall report in
writing to the owner or agent when anything which he is not competent to order, is required for the aforesaid purpose
and a copy of every such report shall be maintained.
(3) The manager shall assign to every competent person and official his specific duties and on his appointment
provide to him a copy of the regulations, rules and bye-laws and any orders made thereunder which affect him and he¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 69
shall take all possible steps to ensure that every such person understands, carries out and enforces the provisions
contained therein in a proper manner.
(4) The manager shall examine all reports, registers and other records required to be made or kept in
pursuance of the Act, the regulations and orders made thereunder and shall countersign the same and date his
signature:
Provided that the manager may, by an order in writing, delegate this duty to a deputy manager except in cases
where a specific provision is made requiring the manager to countersign a report or register.
(5) The manager shall pay attention to and cause to be carefully investigated any specific representation or
complaint that may be made to him in writing by a work person of the mine as to any matter affecting the
environment or safety or health of persons in or about the mine.
(6) When an accident resulting in any serious bodily injury to any person or loss of life occurs in a mine, the
manager shall inspect the site of accident immediately and shall also either himself or through safety officer or
through an enquiry committee duly constituted by him have an enquiry made into the causes of and circumstances
leading to the accident and the results of every such enquiry and a plan and section of the site of the accident showing
the details shall be submitted to the Regional Inspector within thirty days of the date of occurrence.
(7) The manager shall perform such other duties as specified under the Act, the regulations and orders made
thereunder.
(8) The manager may suspend or take such disciplinary action or recommend as he thinks fit against the work
persons for contravention of any provision of the Act, or the regulations and orders made thereunder.
(9) The manager shall frequently inspect the mine and maintain a record therein the findings of each of his
inspections and also the action taken by him to rectify the defects mentioned, if any.
(10) The manager shall identify operations of hazardous nature and ensure framing and usage of code of practices
to be followed by persons engaged in the operation which shall be consistent with the Act and the regulations or
orders made thereunder.
28. Duties and responsibilities of deputy manager.-(1) The deputy manager shall carry out the duties assigned
to him by the manager, and shall ensure that in the part of the mine or installations assigned to him by the manager,
all work is carried out in accordance with the provisions of the Act and of the regulations or orders made thereunder.
(2) The deputy manager shall –
(a) ensure that all operations in the part of the mine assigned to him under sub-regulation (1) are carried
out as per the code of practices framed under these regulations;
(b) subject to the orders of the manager, visit and examine the part of the mine and the installations under
his charge or part thereof;
(c) maintain a detailed report of the result of each of his inspection and also action taken by him to rectify
the defects noticed, if any;
(d) ensure that when any drilling rig, workover rig and associated equipment, production equipment or
pipeline is shifted or newly installed, it is given a trial run before being put into use;
(e) in the absence of manager, deputy manager shall have the same responsibility and discharge the same
duties and shall be subjected to same liabilities as the manager, but not so as to exempt the manager therefrom.
29. Duties and responsibilities of installation manager.- The installation manager shall-
(a) have responsible charge and control of such installation(s) and shall carry out such duties, as may be
assigned to him by the manager or deputy manager;
(b) ensure that in the installation(s) assigned to him, all work is carried out in accordance with the
provisions of the Act and the regulations or the orders made thereunder;
(c) ensure that all operations in the installation(s)or part of the mine assigned to him under clause (a) are
carried out as per the code of practices framed under these regulations;
(d) ensure that a notice of his appointment is available at site and his name is displayed at a place in the
installation(s) in such a position that it can be easily and conveniently read;
(e) visit and examine the installation(s) or part thereof under his charge on every working day to see that
safety in every respect is ensured;
(f) maintain a detailed record of the results of each of his inspections and also of the action taken by him
to rectify the defects noticed, if any;
(g) ensure that when any drilling rig, work-over rig and associated equipment or production equipment
or pipeline is shifted or newly installed, a trial-run is given under his supervision or person so authorised by him
before it is put into use;70 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(h) ensure that all persons employed at the installation are thoroughly instructed and familiar with the
provisions of the standing orders, standard operating procedures, code of practices and emergency plan made
under these regulations relating to prevention of blowout and fire;
(i) ensure that the provisions of the Act and the regulations or orders made thereunder relating to the
installation, maintenance, operation or examination of machinery and equipment are properly carried out by
himself or by officials or by competent persons or work persons, as the case may be, appointed for the purpose;
(j) during the construction of an installation or any operation there at, when there is an emergency or
apprehended emergency endangering the life or safety of any person or the stability and safety of the installation,
himself take or cause to be taken such measures as are necessary or expedient to avoid the emergency.
30. Duties of safety officer.-(1) The safety officer shall -
(a) inspect, as often as may be necessary, the installations of the mine with a view to identify the dangers
which may cause bodily injury or impair health of any person or environment;
(b) advise the manager or deputy manager on measures necessary to prevent dangerous situations;
(c) enquire into the circumstances and causes of all accidents whether involving persons or not and
advise the manager or deputy manager on measures necessary to prevent recurrence of such accidents;
(d) collect, compile and analyse information in respect of accidents and dangerous occurrences with a
view to promote safe practices and improvement of working environment;
(e) organise regular safety education programmes and safety campaigns to promote safety awareness
amongst persons employed in the mine;
(f) ensure that all new workers and workers transferred to new jobs receive adequate training in safety,
firefighting and first aid;
(g) maintain a detailed record of work performed by him every day.
(2) The safety officer shall be assisted by adequate number of assistants for the discharge of his duties.
(3) No duties other than those specified in sub-regulation (1) shall be assigned to the safety officer.
31. Duties of fire officer.-(1) The fire officer shall -
(a) ensure the observance of the provisions of the Act and the regulations or orders made thereunder
concerning fire detection, fire-fighting systems and emergency plan and advise the manager or deputy manager
on measures necessary to ensure adequate protection against fire;
(b) ensure that code of practices for fire-fighting are prepared and implemented;
(c) ensure proper layout, installation and maintenance of fire-fighting equipment;
(d) ensure that emergency plan for likely fire situations are prepared;
(e) organise regular training of persons in-charge of fire-fighting duties with particular reference to
contingency or emergency plan for fire, correct assessment and handling of fire problem;
(f) ensure that persons on firefighting duties undertake simulated fire drills at least once in every
month to study promptness of response and effective tactics;
(g) examine at least once in every quarter all devices and equipment of fire detection and fire-fighting
systems in the mine and report any defects in the same to the manager or deputy manager;
(h) exercise a general supervision and co-ordination during control and extinguishment of any fire in
the mine;
(i) assist the manager or other officials so authorised, to conduct enquiry into the causes and
circumstances of all fires with a view to prevent reoccurrence in the mine;
(j) maintain detailed record of work performed by him every day.
(2) No duties other than those specified in sub-regulation (1) shall be assigned to the fire officer.
32. Duties or responsibilities of competent persons for well perforation.-(1) The competent person(s)
appointed or authorised under sub-regulation (1) of regulation 20 shall be responsible, under these regulations or orders
made thereunder, for handling, transport and use of explosives in the mine in accordance with the Oil Industry Safety
Directorate Standard, OISD-STD-191 or its revised version.
(2) The competent person(s) for well perforation shall –
(a) be responsible for the observance by his assistants, if any, of such provisions and of any direction
with a view to safety, which may be given to them by a superior official;
(b) not hand over any explosive to any unauthorised person;
(c) be present when shots are being charged and shall himself fire the shots; and
(d) be responsible when a shot has misfired to see that the gun is safely disarmed.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 71
33. Duties of competent persons.-(1) Every competent person shall be subject to orders of superior officials and
shall perform his duties assigned to him in accordance with the provisions of the Act and of the regulations or the
orders made thereunder.
(2) The competent person shall not -
(a) depute another person to perform his work without the sanction of his superior official;
(b) absent himself without having previously obtained permission from such official for the period of
his absence or without having been relieved by a duly competent person; and
(c) without permission from such official, perform during his shift, any duties other than those for
which he has been appointed.
(3) The competent person shall, on the occurrence at his place of work any hazardous condition, take prompt
corrective measures to eliminate the hazard.
CHAPTER – V
DRILLING AND WORKOVER
34. Derricks.-(1) Every part of a derrick, mast and sub-structure shall be of sound construction and strength,
meeting the maximum load criteria for which it is designed and shall be maintained in safe working condition all the
time.
(2) The derrick shall be adequately secured to prevent it from overturning.
35. Derrick platforms and floors.- (1) On every derrick or portable mast, a platform at least 0.60 meters wide
shall be provided on all sides of the crown block equipped on its outer edges with a two-rail railing at least one meter
high and toe-board 0.15 meters high.
(2) On every derrick, platforms shall be provided for persons to stand on while they handle pipe or other
equipment racked in or on the derrick which shall cover the space from the working edge of the platform to the legs and
girts of the derrick and be firmly secured.
(3) The working edge of monkey board platforms shall be so placed that there is adequate clearance for safe
passage of travelling block.
(4) Platforms, floors and walkways shall be kept free of dangerous projections or obstructions and shall be so
maintained that adequate protection against slipping is provided.
36. Ladders.-(1) Every derrick shall be equipped with a ladder arrangement ensuring safe access to all elevated
walking and working platforms.
(2) Access from ladder to working platforms shall be properly secured with railings and toe boards.
(3) Every ladder shall have rungs equally spaced and the top end of each ladder section shall extend not less than
one meter above the platform.
(4) Landing platforms or cages shall be provided on ladders of more than six meters to a maximum unbroken
length of nine meters:
Provided that, where personal fall arrest system is used on such ladders, landing platforms and cages may not be
required to be provided.
(5) All landing platforms shall be equipped with railings and toe-boards so arranged as to give safe access to the
ladder.
(6) All ladders leading from derrick platform to monkey board shall be provided with fall prevention device
meeting with applicable Indian or international standard(s) to prevent persons from falling.
37. Safety belts and life lines.-(1) Every person who works above the first girt of a derrick shall be provided
safety belt with full body harness and lifeline certified as per IS 3521 of the Bureau of Indian Standard or its revised
version and shall use the same unless he is otherwise protected against the danger of falling from height.
(2) No person shall work or travel from where he is likely to fall for more than 1.8 metres unless he is protected
by certified safety belt with full body harness and lifeline and shall use the same whilst at work.
38. Emergency escape device.-(1) On every monkey board there shall be installed and maintained an escape line,
escape device with a slide of adequate strength as per standard specified by the Chief Inspector for the purpose by a
general or special order in such a manner that persons can come down safely from the monkey board to ground level in
an emergency.72 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) Escape line shall be securely fastened to the girt immediately above the monkey board and it shall be securely
anchored to ground at a distance, from centre of cellar pit, not less than the height of the monkey board from the ground.
(3) Landing place shall be provided with adequate quantity of sand or other suitable material for cushioning to
prevent hard landing.
(4) A competent person shall inspect every part of emergency escape device, braking system as per the inspection
and maintenance guidelines of Original Equipment Manufacturer and the record of every such inspection shall be
maintained by the person who made the inspection.
(5) The track rope of the emergency escape device shall have sufficient sag to avoid straining due to pre-
tensioning.
(6) The track rope or any part thereof shall have no damage or kink.
(7) The braking unit pulleys of the emergency escape device shall be checked for free rotation prior to each
installation and they shall be checked for any wear and cleaned to make it free from slippage.
39. Weight indicator.-(1) On every rig a weight indicator shall be provided and used to register a close indication
of the load suspended from the casing line.
(2) The weight indicator shall be maintained in working order and calibrated at intervals not exceeding six
months.
40. Escape exits.-The rig floor area and each draw-works engine floor area shall have not less than two escape
exits placed on opposite sides to allow unobstructed escape.
41. Guardrails, handrails and covers.-(1) Floor openings and floor holes shall be guarded by a standard railing
and toe-board or cover.
(2) Every open-sided floor or platform 1.8 metres or more above adjacent floor or ground level where any person
is allowed to work or pass shall be guarded by a standard railing.
(3) On the inside of all mud tank runways standard railing shall be provided unless other means are available to
prevent a person from falling into the mud tanks.
(4) Open sided floors, walkways, platforms or runways above or adjacent to dangerous equipment and similar
hazards shall be guarded with a standard railing and toe-board.
42. Draw-works.-(1) The draw-works shall be fitted with a suitable device with its control near the driller’s stand
to stop the draw-works in case of an emergency.
(2) No draw-works shall be operated unless all guards are in position and maintained.
(3) If lubrication fittings are not accessible with guards in place, machinery shall be stopped for oiling and
greasing.
(4) The brakes, linkage and brake flanges of draw works shall be examined by a competent person once at least in
every twenty four hours and if any defect is found during such examination, the draw-works shall not be used until such
defect is remedied.
(5) The results of every such examination specified under sub-regulation (4) shall be recorded by the competent
person making the inspection.
(6) The draw-works shall be provided with an automatic device which shall effectively prevent the travelling
block from coming closer than two meters of the crown block on the one end and crashing on the rotary table at the other
end.
43. Cathead and catline.-(1) Catheads operated manually shall be equipped with a guide divider to ensure
separation of the first wrap of line or rope.
(2) The key seat and projecting key on a cathead shall be covered with a smooth thimble or plate.
(3) When a cathead is in use, a competent person shall be at the controls and in the event of any emergency, he
shall immediately stop the rotation of the cathead.
(4) The operator of the cathead shall keep his operating area clear and shall keep the portion of the catline not
being used coiled or spooled.
44. Tongs.-(1) Uncontrolled rotation of pipes shall be effectively prevented while making or breaking pipe
connections and a back-up tong shall be used for this purpose whenever required.
(2) Tong counter balance weights and lines shall be provided with guards to prevent accidental contact.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 73
(3) The ends of tong safety lines shall be secured with not less than three wire-line clamps, or crimped.
45. Safety chains or wirelines.- Tongs, ends of rotary hose and suspension sheaves shall be fitted with safety
chains or wire lines.
46. Casing lines.- (1) All casing lines shall be visually examined by a competent person once at least in every
seven days and the condition of the wire as to wear, corrosion, brittleness and fracture shall be noted, and a report of
every such examination shall be recorded by the person who made the examination.
(2) If during any inspection, any defect or weakness is found by which the safety of persons may be endangered,
such weakness or defect shall be promptly reported in writing to the installation manager or manager and until such
weakness or defect is remedied, the casing line shall not be used.
(3) The slip and cut operation shall be carried out under the supervision of the installation manager or other
competent person who shall record the date and other particulars thereof and shall sign and date the same.
(4) The Oil Industry Safety Directorate Standard, OISD STD - 187 or its revised version for inspection, slip and
cut procedure of casing line shall be followed, so as to prevent excessive wear of the casing line.
47. Rigging equipment for material handling.-(1) Rigging equipment including cranes for material handling
shall be checked prior to and during its use to ensure that it is safe.
(2) Rigging equipment shall not be loaded in excess of its recommended safe working load.
(3) While operating cranes in the vicinity of overhead electric transmission line, adequate precaution shall be
taken against accidental contact with the electric transmission line unless the same is kept de-energised during movement
of the crane.
(4) All rigging equipment and crane shall be examined by a competent person at such interval and in accordance
with the procedure as laid down by the manager or installation manager and he shall record the results of his inspection.
48. Storage of materials.-(1) All materials stored in tiers shall be stacked, racked or otherwise secured to prevent
sliding, falling or collapse.
(2) Passage ways shall be kept clear to provide for the free and safe movement of material handling equipment or
persons.
49. Construction and loading of pipe-racks.-(1) Construction of pipe racks shall be designed and maintained to
support any load placed thereon.
(2) Adequate provision shall be made to prevent pipe, tubular material or other round material from rolling off
pipe-racks.
(3) No person shall go or be allowed to go between pipe-rack and a load of pipe during loading, un-loading and
transferring operations of pipes unless effective protection device or system is provided to protect such person from
being hit by any load of pipe in motion.
50. Rigging-up and rig dismantling.-(1) The raising and installation of heavy loads shall be done during daylight
hours unless adequate general lighting arrangements are provided at the place of work.
(2) All loose parts and tools shall be securely fastened.
(3) Guy lines, cat lines, sub lines and such other lines shall not be installed within six meters of any electric
overhead transmission lines.
(4) The exhausts of internal combustion engines shall be provided with water quenched or other effective spark
arrestors.
(5) High pressure circulating fluid lines and steam line shall be securely anchored.
(6) While rigging-up and rig dismantling, the wellhead shall be protected against damage from sliding or falling
objects.
(7) Components from a loft including nuts, bolts and cleats shall be lowered safely to the ground either singly,
bundled or in containers.
(8) Code of practices for rigging-up and dismantling shall be framed and implemented and kept updated by the
manager; or a deputy manager or an installation manager authorised for the purpose by him.
51. Mud tanks and pumps.-(1) Mud tanks and mud pumps of sufficient capacity shall be provided and
maintained for effective control of the well.
(2) Mud tanks shall be so designed and installed as to provide positive suction to mud pumps.74 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(3) All mud pumps connected to a drilling rig shall be equipped with a pressure relief valve and an operating
gauge in the system.
(4) The pressure relief valve shall be set to discharge at a pressure not more than ten per cent of the established
maximum working pressure of the pump, pipes and fittings.
(5) The discharge from a pressure relief valve shall be piped to a place where it will not endanger persons and the
discharge line anchored securely.
(6) There shall be no valve between a pump and its pressure relief valve.
52. Well control equipment and operations.-(1) Safe practices for work over and well stimulation operations
and blowout prevention equipment systems for drilling wells practices shall be as per Oil Industry Safety Directorate
Guidelines, OISD-GDN-182 or Oil Industry Safety Directorate Recommended Practices, OISD-RP– 174 or their revised
versions.
(2) In well control equipment and operations, it shall be ensured that-
(a) well control fluids and equipment are available and installed and used as required;
(b) well is full of well fluid of adequate specific gravity to overbalance the bottom hole pressure;
(c) during tripping operation, close watch is maintained to notice any sign of kick in the well and annulus is
kept full;
(d) full opening safety valve with connection for circulation and operating key are readily available and
kept in open position on the derrick floor;
(e) blow out preventer and related equipment like choke and kill manifold, control panel and accumulator
are available, maintained and tested regularly;
(f) blow out preventer equipment is function-tested and pressure-tested when installed and also at the
appropriate time during operations to determine that the blow out preventer functions properly;
(g) instructions of the blow out preventer operating manual of the manufacturer are followed;
(h) all connections, valves, fittings, piping etc. have a minimum working pressure equal to the rated
working pressure of the blow out preventer;
(i) bolts, nuts and fittings of correct size are used and tightened to the recommended torque; and all
connections are pressure-tested before resuming operation;
(j) all manually operated valves are equipped with hand wheels, and always kept ready for use;
(k) pit drills are carried out regularly
53. Selection of well control equipment.- Selection of well control equipment shall be made in accordance with
Oil Industry Safety Directorate Recommended Practices, OISD-RP–174 or its revised version.
54. Periodic inspection and maintenance of well control equipment.-(1) Inspection and maintenance
procedures for well control equipment shall be established by taking into consideration the Original Equipment
Manufacturer’s recommendations.
(2) After inspection of each well, the well control equipment shall be cleaned, visually inspected, preventive
maintenance performed before installation at the next well.
(3) Major inspection shall be carried out at intervals of not more than five years of service or as per Original
Equipment Manufacturer’s recommendation.
(4) Records of every inspection made under sub-regulations (2) and (3) shall be maintained by the competent
person who made the inspection.
(5) Spare parts requirement as per Original Equipment Manufacturer shall be considered.
(6) Separate maintenance history or log book of the entire blow out preventers, choke manifold and control units
shall be maintained.
(7) All pressure gauges on the blow out preventers control system shall be calibrated at least once in every six
months.
55. Control system for blowout preventers.-(1) All ram preventers shall have locking mechanism and
instructions for operating the controls shall be posted prominently near the control unit.
(2) All controls of power operated blowout preventers shall be located within easy reach of the driller on the
derrick floor.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 75
(3) A remote control panel for the blowout preventer shall also be installed at ground floor level at a safe
distance from the derrick floor.
(4) Blow out preventers shall be connected to an accumulator system which shall be capable of providing
fluid of sufficient volume to close all the blowout preventers in the stack and open hydraulically operated valve.
(5) All controls for blowout preventers shall be clearly identified with suitable markers.
56. Testing of blowout preventer assembly.- Testing of blowout preventer assembly shall be done in accordance
with Oil Industry Safety Directorate Recommended Practices, OISD-RP– 174.
57. Precautions against blowout.-(1) The following control equipment for the drilling mud system shall be
installed and kept in use during drilling operations, namely:-
(a) a pit level indicator registering increase or reduction in the drilling mud volume and shall include a
visual and audio warning device near the driller’s stand;
(b) a device to accurately measure the volume of mud required to keep the well filled at all times;
(c) a gas detector or explosimeter at the primary shale shaker and connected to audible or visual alarm
near the driller’s stand;
(d) a device to ensure filling of well with mud when the string is being pulled out; and
(e) a control device near the driller’s stand to stop the mud pump when the well kicks.
(2) If the control equipment mentioned in sub-regulation (1) indicate that formation fluids are entering the well,
immediate steps shall be taken to control the well.
(3) The manager of every mine in which blow out preventer assembly is installed, within thirty days of such
installation, shall frame standing orders specifying the action to be taken when a well kicks and the duties of each person
employed on the rig and of such other persons as may be necessary.
(4) A copy of standing orders referred to in sub-regulation (3) shall be posted conspicuous places near the rig.
(5) Each person employed on a rig shall have an adequate understanding of the warning signs of a kick, the
standing orders mentioned in sub-regulation (3), the blowout preventer assembly and be able to operate the controls
forblowout preventer, and the blowout prevention drill shall be conducted for this purpose once in seven days.
(6) Suitable control valves shall be kept available near the well which can be used in case of emergency to control
the well.
(7) When running in or pulling out string, a suitable mechanism shall be kept readily available at the derrick floor
to prevent uncontrolled flow from the string.
58. Precautions after a blowout has occurred.-(1) On the appearance of signs indicating that a well is blowing
out, all persons other than those whose presence is deemed necessary for controlling blowout shall be immediately
withdrawn from the installation and suitable action shall be taken in accordance with the procedures formulated in the
emergency plan prepared.
(2) During the whole time that any work of controlling a blowout is in progress, the following precaution shall be
taken, namely : -
(a) competent person shall be present on the spot throughout;
(b) an area within five hundred meters of the well on the down wind direction shall be demarcated as
danger zone, and-
(i) all electrical installations within the danger zone shall be de-energised to prevent the
ignition;
(ii) flameproof or Intrinsically safe lamps or torches shall only be used within the danger
zone;
(iii) no naked lights or vehicular traffic shall be permitted within the danger zone;
(c) a competent person shall ascertain the condition of ventilation and presence of gases with a
flameproof or intrinsically safe instrument so far as safety of person is concerned;
(d) there shall be available at or near the place, adequate number of self-contained breathing apparatus or
any other apparatus of such make as per IS 10245 Part-2 or IS 10245 Part 1 of the Bureau of Indian Standards or
their revised versions for use in emergency;
(e) adequate fire-fighting facilities shall be kept readily available for immediate use.76 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
59. Drilling and work over operations.-(1) At the beginning of every shift, the instruments and controls at the
driller’s stand, draw-works, mud pumps, sensing and monitoring instruments, mud logging, casing line, catline and
blowout preventer assembly shall be examined by the person in- charge of the shift or a competent person and he shall
satisfy himself that they are in good working order.
(2) The manager of every mine shall ensure that a detail plan of operations relating to safety and geo-technical
matters is formulated before commencement of drilling operation or work over plan for work-over operations for the
individual well and the same shall be made available to installation managers, other concerned officials and competent
persons before commencement of the said operations.
(3) Before commencement of drilling or work over operation, a pre-spudding or pre-work over meeting shall be
carried out to examine and ensure safe operation of drilling or work-over and other related activities, and the finding shall
be recorded and signed by the members.
(4) The driller shall see that no person remains in a position of danger at or near the rotary table before the rotary
table is set in motion.
(5) The casing line shall not be in direct contact with any derrick member or foul with any material in the derrick
excepting the crown block and any travelling block sheaves, a line spooler, a line stabilizer or weight indicator.
(6) When cementing, no person shall be allowed on the rig floor near the wellhead or near the cementing line and
equipment except those actually engaged on the operation.
(7) All high-pressure pipes fitted with flexible points shall be suitably anchored and pressure tested before
cementing operations commence.
(8) After cementing operation and prior to perforation, casing shall be hermetically tested at a pressure at least
seventy per cent of the casing burst pressure.
60. Drill stem test.-(1) Prior to the commencement of drill stem test, -
(a) the blowout preventer assembly shall be subjected to pressure test and function test;
(b) fire-fighting equipment shall be kept readily available for immediate use;
(c) no person other than those required for the test shall be admitted on the drilling floor;
(d) the test line shall be securely anchored at each end and at each nine metres interval;
(e) the kelly hose shall not be used as part of the test line;
(f) the test line and valves shall be examined by a competent person and no test shall be taken if any
defect is discovered until such defect is rectified.
(2) Initial opening of drill stem test tools shall be restricted to daylight hours only.
(3) When petroleum or natural gas has been recovered during a drill stem test, the drill pipe shall not be pulled out
unless the well is properly killed and steps are taken to ensure that there is no possibility of petroleum or natural gas
being present in the drill pipe.
(4) Gas produced to the atmosphere during a drill stem test shall be burnt through a flare-line or burners.
Chapter – VI
PRODUCTION
61. Well completions by perforation.-(1) Well Perforation shall be carried out as per Oil Industry Safety
Directorate Standard, OISD-STD-191 or its revised version.
62. Well testing and activation.-(1) Before commencement of testing or activation of well, the christmas tree and
flow lines including the associated fittings shall be subjected to design pressure and the results of such tests shall be
recorded.
(2) Well testing and activation shall be done under the direct supervision of the installation manager or an official
competent for the purpose authorised in writing by owner, agent or manager or deputy manager and he shall ensure that -
(a) flow-lines are firmly anchored to the ground;
(b) the separator safety valve is in good working order and properly adjusted;
(c) hydro tested separator shall be used;
(d) adequate fire-fighting equipment is readily available for immediate use; and
(e) adequate facilities are provided to safely collect the well products in tanks.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 77
(3) Before commencement of well testing, the installation manager or competent person referred under sub-
regulation (1) shall ensure that well control procedures are made available to all concerned persons at the site and they
have understood the same, considering all eventualities.
(4) Well testing and activation shall not be carried out beyond day light hours or under conditions of lightning,
thunder, high winds and heavy rain, except with the permission of the manager based on job safety analysis and subject
to observance of the control measures and other conditions he may specify.
(5) A record of every permission referred to in sub-regulation (4) along with sufficient justification shall be
maintained.
63. Production facility.- (1) When it is intended to construct any new production facility or carry out material
alterations at existing production facility, which covers Quick Production System (QPS), Early Production System (EPS),
Oil Collecting Station (OCS), Group Gathering Stations (GGS), Gas Collection Station (GCS), Gas Compressor Plant
(GCP), Central Tank Farm (CTF), Intermediate Tank Farm (ITF), Water Injection Plant (WIP), Polymer Injection Plant
(PIP), In-situ Combustion Plant (ICP) or any other important facility in oilfield within any mine, the owner, agent and
manager shall ensure that-
(a) the name and location of any other production facility and all pipe lines connected with the
facility, the name of each well connected to the facility, the extent of the land over which right of use or right of
way has been established and any railway, public road, public works, building or any other surface features lying
within sixty metres of such facility, are shown on the surface plan and a copy thereof is kept at the facility;
(b) the documents, in compliance to all relevant statutory requirement, safety standards and safety
guidelines are made available at site;
(c) production facility where the quantity of petroleum gases or liquid stored or handled exceeds three
hundred tonnes and one lakh tonnes respectively, the Safety Report in the Form and method specified by the Chief
Inspector for the purpose are made available at site;
(d) detailed piping and instrumentation diagram of facility is maintained and kept updated and a copy
of the same is kept available at the facility.
(2) The production facilities shall be of sound construction and required strength; and shall be designed,
constructed, operated and maintained in accordance with the standard specified by the Chief Inspector for the purpose by
a general or special order.
64.Storage tank.-Every tank for the storage of petroleum in bulk shall be designed, constructed, operated and
maintained in accordance with Oil Industry Safety Directorate Standard, OISD-STD-118 or its revised version.
65. Dyked enclosures.-(1) Petroleum storage tanks shall be located in dyked enclosures with roads all around the
enclosure and all dyked enclosures shall be provided with proper discharge system to prevent accumulation of oil or
water in the enclosures.
(2) Layout and design of dyked enclosures for petroleum storage tanks shall be in accordance with Oil Industry
Safety Directorate Standard, OISD-STD-118.
66. General requirement for storage tank and dyked enclosures.-(1) The design practices for the tanks used
for storage of petroleum shall be as per of Oil Industry Safety Directorate Recommended Practices,OISD-RP-108 or its
revised version.
(2) The height of the storage tank shall not exceed one and half times its diameter or twelve metres, whichever is
less.
(3) Piping from and to any tank located in a dyked enclosure shall not pass through any other dyked enclosure and
the piping connected to tanks shall run directly to outside of dyke to the extent possible to minimise piping within the
enclosures.
(4) The minimum distance between a tank shell and the inside toe of the dyke wall shall not be less than half the
height of the tank.
(5) There shall be access on all four sides of each dyke area and roads shall be linked to minimize the effect if one
road is cut off during fire.
(6) An air space of not less than five per cent of the total capacity of the tank shall be kept in each tank.
(7) Every tank after being installed or reinstalled and before being put in use, shall be hydro tested as per Oil
Industry Safety Directorate Standard, OISD-STD-129 or its revised version by a competent person so as to ensure that it
is free from any leakage and is suitable for storage of petroleum.
(8) A report of such test shall be maintained in the mine.78 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(9) Every storage tank including its roof and all metal connections shall be electrically connected with very low
earth resistance in accordance with the standard and procedure mentioned in International Electrochemical Commission
Standard, IEC 62305-3 or its revised version.
(10) The effectiveness of earthing shall be tested once in twelve months and the results of every such test shall be
maintained,
(11) No person shall enter or be permitted to enter a tank for cleaning or maintenance unless work permit for
confined space entry has been obtained or issued and the tank has been examined by a competent person and found to be
gas-free.
(12) Walkway with handrail on the roof of the tank shall be provided to facilitate inspection, checking of vents
and flame arrestor etc. so that movement of personnel on roof is safer.
(13) Every tank shall be painted and its numbering, safe filling height and reference height shall be painted on the
tank to avoid operating errors.
(14) No gauging or sampling of tank shall be undertaken during thunder or hail storms.
67. Safety precautions in oil dispatch pump area.-(1) All moving parts in the pump shall be adequately
guarded.
(2) Discharge outlet of Safety Relief Valve shall be fixed with the suction end of the pump.
(3) Engine exhaust shall be fixed with spark arrestor.
68. Manifold area.-The manager of every mine shall ensure that pressure gauge of suitable range and non-return
valve are fitted on each inlet lines to the manifold.
69. Process area.-(1) In process area, the manager of every mine shall ensure that-
(a) discharge line of Safety Relieve Valve or Pressure Safety Valve of the Pressure Vessel is
connected to the flare through a common header.
(b) all bath heaters, indirect heaters and flare line are provided with remote ignition system;
(c) water level is always above the level of fire tube in operational bath heaters;
(d) flame arrestor is in place in air intake line of the burners;
(e) all vessels, equipment, bath heaters or indirect heaters handling petroleum are effectively earthed;
(g) insulating mat of IS 15652 of the Bureau of Indian Standards or its revised version shall be
provided near the electrical control panels;
(h) records of vessels and testing of Safety Relief Valve or Pressure Safety Valve are inscribed on the
vessels and Safety Relief Valve and Pressure Safety Valve.
(2) In gas fired heaters (Heater Treaters, Bath heaters and Indirect Heaters), Burner Management System shall be
provided in case of new fired heaters which will shut off gas supply to main and pilot burners in the event of pilot flame
out and necessary provision of audible alarm on pilot flame out shall also be provided.
(3) For existing fired heaters, regular monitoring of hydrocarbon gas shall be carried out and record maintained by
a competent person authorised in this behalf.
70. Generator area.-(1) The manager of every mine shall ensure that insulating mats are provided in the
following area, namely:-
(a) electrical control room;
(b) generator set and its control panel;
(c) transformer and its panel; and
(d) control panels near motors.
(2) Height of the exhaust of the engine shall be as per guidelines issued by the Central Government in the Ministry
of Environment, Forest and Climate Change from time to time.
71. Gas compressor shed or house.-(1) Gas compressors shed or house shall be located from heaters at safe
distance as per Oil Industry Safety Directorate Standard, OISD-STD-118 or its revised version and shall have roofing and
open from sides to avoid accumulation of heavier vapours or gases on the floor of compressor house.
(2) The Compressor shed or house shall be located near the battery limits to facilitate ease in maintenance and
operation.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 79
(3) Compressors in compressor shed or house shall be fitted with-
(a) pressure relief valves on inlet and all stages to prevent pressure build up above the pre-determined
set point;
(b) high discharge temperature shut down high cooling water temperature switch fitted to cooling
water return line to shut the compressor in the event of a fault;
(c) high, inlet, inter stage and discharge pressures shut down;
(d) low lube oil pressure shut down;
(e) low cooling water flow switch fitted to the cooling water return line to shut the compressor in the
event of fault;
(f) a remote isolation switch, wherever applicable, for emergency shutdown with manual reset at
control panel.
(4) The safety devices under sub-regulation (1) shall also be inter-coupled with automatically operated with hooter
or audio alarm for indication to the operator.
(5) Adequate number of hydrocarbon gas detectors shall be installed in gas compressor shed or house inter-
coupled with audio alarm system that gets triggered at twenty per cent of Lower Explosive Limit).
72. General safety for production facility and installations.- The manager of every mine shall ensure that-
(a) wind sock is provided in all the production facility or installations;
(b) facility of washing eyes is provided and Material Safety Data Sheets are displayed in the chemical
handling shed;
(c) an emergency vehicle is made available in all the time in every production facility or installation;
(d) all pipelines are painted as per colour code indicated in IS 2379 of the Bureau of Indian Standards
or its revised version and the said colour code are displayed in the installation;
(e) display boards are posted in strategic locations for prohibitory messages;
(f) all relevant documents pertaining to new production facility regarding construction and material
alterations are maintained and kept available at facility.
73. Precautions during acidising operations.-(1) Acidising operations at a well shall be carried out under the
direct personal supervision of an official authorised for the purpose.
(2) Prior to acidizing operations all pressure lines and associated equipment shall be tested to a pressure ten per
cent higher than the expected working pressure.
(3) A non-return valve shall be installed in the treating line as close to the wellhead as practicable.
(4) The official shall see that -
(a) no person other than those required for acidising operation remains in the vicinity of the well;
(b) Material Safety Data Sheet shall be displayed at the site of operation and the requirements of
Material Safety Data Sheet and Personal Protective Equipment and other protective facilities shall be
ensured by official or competent person.
74. Precautions during fracturing operations.-(1) Fracturing operations at a well shall be carried out under the
direct personal supervision of an official authorized for the purpose.
(2) Prior to fracturing operations, discharge pipeline up to the last valve on the wellhead shall be tested to a
pressure ten per cent higher than the expected fracturing pressure.
(3) A non-return valve shall be installed in each discharge line as close to the wellhead as practicable.
(4) All discharge and bleed-off lines shall be securely anchored and the bleed off lines shall discharge into open
tanks with proper precautions.
(5) The official shall see that in the vicinity of the well -
(a) no person other than those required for fracturing operation remains;
(b) no naked light or other source of ignition is permitted;
(c) all electrical equipment is de-energised; and
(d) adequate fire-fighting equipment is made available for immediate use.
(6) Pumping units shall be located cross wind at safe distance from the wellhead.
(7) All high pressure pipes should be anchored and secured.
75. Precautions during loading and unloading of petroleum tankers.-(1) Every tank shall be checked for its
fitness and safe condition, and the loading and unloading of tanker shall be supervised by a competent person authorised
for the purpose.80 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(2) Loading and unloading of tankers carrying petroleum shall not be carried out beyond day light hours or under
conditions of lightning, thunder, high winds and heavy rain, except with the permission of the manager based on job
safety analysis and subject to observance of the control measures and other conditions he may specify.
(3) A record of every permission referred to in sub-regulation (2) given along with sufficient justification shall be
maintained.
(4) In the loading and unloading area all pipe-lines, fittings and delivery hoses or metal pipes, metallic loading
arms, swivel joints, tanks, chassis of tankers shall be electrically continuous and be efficiently earthed.
(5) No tankers shall be loaded or unloaded until its engine has been stopped and battery isolated from electrical
circuit and the engine shall not be restarted and the battery shall not be connected to the electrical circuit until all tanks,
and valves have been securely closed.
(6) No smoking or open flame shall be permitted within thirty meters of the loading point and within the protected
area of the loading terminal.
(7) In the loading and unloading areas adequate arrangement for ventilation shall be made to prevent
accumulation of flammable vapour near ground level due to low ambient temperature.
(8) Adequate fire-fighting equipment shall be kept readily available during loading and unloading of tankers for
immediate use.
(9) There shall be provision for spill containment.
76. Treatment system (Effluent Treatment Plant) for water produced from wells.-(1) The treatment system
for water produced from wells shall be designed such that oil content in each discharge stream meets the stipulation as
fixed by the Central Government in the Ministry of Environment, Forest and Climate Change.
(2) The discharge point for water produced from the wells shall be placed in such a manner that such discharges
shall not cause harm to the environment.
77. Well servicing operations.-(1) The manager of every mine shall prepare and implement a well servicing plan
or work over plan for each well to be serviced, detailing all activities to be done during the operations and a copy of this
plan shall be kept at well site.
(2) Before commencement of well servicing operation, pre-workover conference shall be held to examine and
ensure safe operations and other related activities.
(3) Prior to perforation and before lowering completion assembly, casing shall be hermetically tested at a pressure
at least ten percent higher than the formation pressure.
(4) Well servicing operations shall be done under the direct supervision of a competent person authorised for the
purpose.
(5) Every person shall keep clear of the wire line between the drum and floor block.
(6) All persons shall remain at a safe distance from the bailing line during swabbing and scraping operations.
(7) A master gate valve and tubing hanger shall be pre-assembled and kept readily available at the well for
immediate use in case the well kicks during pulling out or running in tubings.
(8) No well servicing operation shall be carried out at any livewell unless proper blowout preventer assembly is
securely installed and maintained.
(9) Before commencement of well servicing operation, the blowout preventer assembly shall be pressure and
function tested.
(10) No tubing shall be pulled out of any well unless the well is properly killed.
78. Artificial lifting of oil.-(1) Unless a submersible pump is used for the purpose, a properly constructed
working platform shall be provided at the well where artificial lift equipment is to be used.
(2) No repairs, lubrication or pressing shall be done unless the pumping unit is stopped.
(3) All surface control valves for gas lift, intermittent gas lift or free plunger lift systems shall be clearly marked
for ready identification.
(4) The manager of every mine shall ensure that job safety analysis is conducted before carrying out artificial,
secondary or enhanced oil recovery operation and suitable technical and other control measures thereof formulated.
(5) Code of practice shall be framed by the manager and circulated to all persons engaged therein.
79. Temporary closure of producing well.-(1) When it is intended to temporarily close any producing well for a
period exceeding thirty days, it shall be filled with mud or water or oil or salt solution or any special chemical so that the
hydrostatic pressure of the fluid column over-balances the formation pressure to prevent leakage of petroleum at the
wellhead.
(2) The control valves of the christmas tree shall be completely closed and control wheels shall be removed.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 81
(3)The christmas tree shall be examined for leakage once in thirty days by a competent person authorised for the
purpose and in case any leakage is detected during such examination, the competent person shall take immediate steps to
stop it.
(4) A report of every such examination shall be recorded and maintained by the person who made the
examination.
(5) The well head should be preferably covered with suitably designed portable protective cover as a security
measure.
80. Plugging requirements of abandoned wells.-(1) When it is intended to abandon a well -
(a) all permeable formations shall be isolated with cement plug;
(b) a cement plug of minimum length of fifty meters shall be placed at the bottom of the well or proper bridge
plug;
(c) a cement plug of a minimum length of fifty meters shall be placed across the shoes of the surface casing or
bridge plug;
(d) the cellar or pit around the well shall be filled up and the land shall be restored to the original level; and
(e) cased wells may be abandoned by placing a bridge-plug above the top of perforations capped with a three
meter cement plug.
(2) Every abandoned well shall be clearly identified at site and on the plan.
CHAPTER –VII
TRANSPORT BY PIPELINE
81. Application.- The regulations in this Chapter shall apply to lay new petroleum pipelines or making any
significant alteration in the existing pipeline and transportation of petroleum by means of pipelines in oilfield within any
mine, as defined under regulation 12.
82. Procedure for laying of pipeline.-(1) Liquid and natural gas transmission pipeline and distribution of piping
system shall be laid as per applicable clauses of Oil Industry Safety Directorate Standards, OISD- STD-141 and OISD-
STD-226 or their revised versions.
(2) Whenever it is intended to lay a new pipeline or making any significant alteration in the existing pipeline in
oilfield within any mine, the owner, agent or manager shall ensure the following, namely:- .
(a) surface plan of the area where the pipeline is proposed to be laid showing the extent of land over which
right of use has been established and route of the pipeline clearly indicating the districts and states through which the
pipeline would pass is kept at the mine;
(b) where it is proposed to lay pipeline within forty-five metres of any railway or of any public work in
respect of which this regulation is applicable by reason of any general or special order of the Central Government or
of any public road or building or of other permanent structure not belonging to the owner of the mine, an intimation
accompanying plan is sent in the case of railway to the railway administration concerned; and in the case of any
public works as aforesaid, to such authority as the Central Government may by general or special order direct.
(3) When any pipeline has been commissioned, the owner, agent or manager shall forthwith submit self-
certification in support of meeting the above requirements and communicate the actual date of commissioning to the
Regional Inspector and a copy thereof be sent to the Chief Inspector and the District Magistrate.
(4) Details about all new pipelines laid and any significant alteration in the existing pipelines made during year in
mine shall be maintained and a copy of it shall also be sent to the Regional Inspector along with annual return.
83. Design of pipeline and fittings.-(1) The pipeline shall be designed in a manner that ensures adequate public
safety under all conditions likely to be encountered during installation, testing, commissioning and operating conditions.
(2) All materials and equipment shall be selected to ensure safety and suitability for the condition of use.
(3) All pipes, valves, flanges and other fitting shall conform to Oil Industry Safety Directorate Standards, OISD-
STD-141 and OISD-STD-226 or their revised versions.
(4) All underground pipes and their components shall be protected against corrosion using suitable external anti-
corrosion coating or painting and cathodic protection and all above ground pipes and their components shall be protected
against corrosion by providing suitable anti-corrosion coating.
(5) (a) Sectionalising valves shall be installed where required for operation and maintenance and control of
emergencies and factors such as topography of the location, ease of operation and maintenance including
requirements for section line fill shall be taken into consideration in deciding the location of the valves:82 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
Provided that the distance between two consecutive sectionalising valves shall not be more than fifty kilometres in
any case.
(b) Sectionalisation valve shall be provided based on risk assessment survey to limit the hazard and damage
from accidental discharge from pipeline and to facilitate repair and maintenance of pipeline.
(6) Pressure safety valves or other devices of sufficient capacity and sensitivity shall be installed to ensure the
normal operating pressure in the pipeline network.
(7) Adequate precautions shall be taken to protect the pipeline from washout, erosion, land slide, excessive load,
impact or other likely hazards, which may cause serious movement or damage to the pipeline.
(8) Where pipeline is laid across the railway or public road, casing pipe shall be extended as specified by the
concerned authorities.
84. Construction, laying and maintenance of pipeline.- (1) Pipelines shall be buried with minimum cover as
specified in Oil Industry Safety Directorate Standard, OISD-STD-141 or its revised version.
(2) Laying of pipelines shall be planned along a pre-identified surveyed route within Right of Way or Right of Use.
(3) Pipeline shall not be laid unless the land is under the sole control of the owner or Right of Use has been
obtained.
(4) All welding and weld inspection shall be done as per Oil Industry Safety Directorate Standard, OISD-STD-141
or its revised version.
(5) Back filling shall be carried out after the pipeline has been laid in the trench prior to commissioning of the
pipeline.
(6) (a) Pipeline markers to indicate presence of pipeline and chainage shall be provided all along the pipeline route.
(b) The markers shall also be provided on each side of national highways or state highways, major district roads,
railway crossings, turning points and water body crossings and at other crossings where third party activity is
expected and at entrance to stations one marker shall be provided.
(c) The following type of markers shall be installed along the pipeline in Right of Way or Right of Use, namely:-
(i) Kilometre markers;
(ii) Right of Way or Right of use boundary pillars on either side at a maximum of two hundred and
fifty metres interval;
(d) Warning Signboards: Markers at crossings shall display caution words “High Pressure Pipeline”, “name of
the operating company” and “emergency telephone contact nunbers.” in regional or Hindi and English languages .
(7) Permission from competent authority shall be obtained while crossing structures such as roads, railways or other
public works.
(8) The minimum hydraulic test pressure at any point along the pipeline shall be 1.25 times the internal design
pressure.
(9) The test pressure shall be maintained for a minimum period of twenty-four hours except where specifically
mentioned.
85. Preparatory works before commissioning of pipelines.- Before commencement of commissioning activities
of pipelines, the owner, agent and manager of a mine shall ensure that-
(a) commissioning Procedure is in place;
(b) pressure testing is completed for entire pipeline and associated station piping;
(c) pressure leak check of the above ground piping and flanged joints is completed;
(d) pipeline has been cleaned and debris etc. has been removed;
(e) mainline sectionalising valves are installed as per requirement;
(f) all Golden joints are inspected and accepted;
(g) geometric survey of pipeline section is carried out, if applicable;
(h) trained and experienced officials in adequate numbers are appointed for supervision of commissioning
work of pipelines.
86. Re-lay, renew or repair of pipeline.- Where the Chief Inspector is of the opinion that it is in the interest of
public safety so to do, he may by an order in writing, require the owner, agent or manager to relay, renew or repair such
pipeline in accordance with requirements as may be specified in such order.
87. Maintenance of Right of Way or Right of Use and inspection of crossings.-(1) The owner, agent or manager
shall maintain a periodic pipeline patrol program to observe surface conditions on and adjacent to the pipeline right of¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 83
way, indication of leaks, construction activity other than that performed by the company, and any other factors affecting
the safety and operation of the pipeline.
(2) Special attention shall be given to such activities as road building, erosions, excavations, and others like
encroachments, vegetation growth to the pipeline system.
(3) Encroachment, pilferage, theft and other miscreants’ activities shall immediately be brought to the notice of
District administration and other concerned authorities.
(4) Right of Way or Right of Use and access to various stations including valve location shall be maintained to
ensure reasonable access to maintenance crews and ensuring visibility or availability of pipeline markers.
88. Patrolling of Right of Way or Right of Use .-(1) Ground patrolling of Right of Way shall be carried out at
least once in a month to observe surface conditions, leakage, any construction activity, encroachments, washouts and any
other factors affecting the safety and operation of pipeline.
(2) Road and railway crossings shall be inspected at least once in three months.
(3) Water body crossings shall be inspected at least twice a year, prior to and after monsoon or flash flood for
exposure.
(4) Rail or road bridge, suspended crossings shall be inspected once in three months to check supports and
structures and anti-corrosion coatings where pipe exits or enters ground.
(5) Right of Way or Right of Use shall be inspected by the officials of the mine at least once in a year for the entire
length of the pipeline preferably to be done after monsoon.
(6) Villagers and public along the Right of Way or Right of Use shall be adequately made aware of the possible
consequence of leaks and this shall be included as a part of regular audit.
(7) Regular liaison shall be maintained with police stations, local panchayats and district authorities along the right
of way and right of use about the possible consequences of leaks and pilferage.
89. Maintenance Procedure or Manual of pipeline system.-(1) The manager of every mine shall formulate and
implement a detailed operation and maintenance procedure or manual for control system and safety interlocks for entire
pipeline system considering the recommendations given by the Original Equipment Manufacturer and the local
conditions.
(2) The manual shall include preventive maintenance schedule with periodicity, i.e. daily, weekly, monthly, half
yearly and yearly; and activities to be carried out during each schedule of maintenance.
(3) Maintenance schedule shall also include activities like detecting, isolating and repairing a leak in the pipe line in
a safe and efficient manner in accordance with code of practices developed and approved by the competent authority
within the organisation.
(4) Standard Operating Procedure shall be developed and maintained.
(5) Standard Operating Procedures for Integrity Assessment of Piggable and Non-Piggable Pipelines shall also
be followed.
(6) Job Safety Analysis to be carried out for any non-repetitive nature of job.
(7) Work permit system for repair and maintenance works shall be followed.
(8) Management of Change: The plans and procedures of operating practices may be modified from time to time as
the situation warrants in operating conditions through the Management of Change document, which shall be serially
numbered and maintained at the mine with copies at the locations.
(9) The Management of Change shall include the justifications requiring the change of operating conditions and the
benefit resulting thereof.
(10) Along with the completion of the changes, the Management of Change shall be closed with amending the “as
built” drawing and the changes made in the Standard Operating Procedures.
90. Pipeline replacement and revalidation policy.- Every mine shall have documented policy for repairing,
replacement, re-valuation of safe operating pressure and revalidation of residual life of all pipelines as per American
Society of Mechanical Engineer standards.
91. Abandonment or discontinuation of pipeline.- A pipeline system that is no longer required for transportation
shall be taken out of service with all hazardous fluids removed from the system and in case, owner, agent or manager of
the minedecides to abandon full or part of the pipeline system, it shall prepare a detailed plan considering-84 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(a) pipeline section and facilities shall be disconnected with positive isolation from all source of supply
prior to abandonment;
(b) pipeline system and facilities to be abandoned shall be purged with nitrogen gas or inert materials or
inhibited water and after purging the ends of the pipeline shall be positively isolated;
(c) in case of revival of abandoned or discontinuation of pipeline, integrity assurance plan shall be
developed and signed by manager or agent of the mine.
92. Documentation.- Records of design, construction, maps, maintenance, pipeline health monitoring and
operations as indicated in this Chapter shall be maintained in hard copies or in electronic form at the mine.
93. Emergency procedure for pipelines.–(1) The Manager of every mine in which any pipeline is laid for
transport of petroleum or natural gas shall submit to the Regional Inspector within sixty days of the coming into force of
these regulations or in the case of a new pipeline, within thirty days of the installation of pipeline, comprehensive
Emergency Procedures specifying the action to be taken in the event of fire, uncontrolled escape of petroleum or natural
gas from the pipeline, bursting or damage to the pipeline.
(2) The copies of the Emergency Procedures specific to the pipeline and the station shall be maintained at each
control room along with plans and sections and the following records, namely:-
(a) operational data
(b) pipeline patrolling records
(c) leak or tapping records
(d) routine or unusual inspection records; and
(e) pipeline repair records.
CHAPTER-VIII
PROTECTION AGAINST GASES AND FIRES
94. Storage and use of flammable material.-(1) Except for fuel in the tanks of the operation equipment, no
flammable material shall be stored within thirty metres of any well:
Provided that, where special conditions exist, the manager may permit such storage within the aforesaid limit in
writing based on risk assessment made and subject to observance of the control measures and other conditions he may
specify therein.
(2) A record of every permission referred to in sub-regulation (1) with sufficient justification shall be maintained.
(3) Safety cans shall be used for handling and use of flammable liquids.
(4) Drainage from any fuel storage shall be in a direction away from the well and equipment.
(5) Any flammable liquid having a flash point of less than sixty-five degree Celsius shall not be used for cleaning
purposes without prior permission in writing of the manager, deputy manager or an installation manager.
95. Precaution against noxious and flammable gases.-(1) No person shall enter or be permitted to enter any
cellar, sump, pit or any confined space or zone “0” hazardous area or the area where a flare has accidentally extinguished
unless it has been examined by a competent person and found to be gas free.
(2) Where any examination made under sub-regulation (1) shows the concentration of flammable gas in excess of
the limit specified for the purpose under the Central Electricity Authority (Measures Relating to Safety and Electric
Supply) Regulations, 2010, the supply of electric energy shall be cut off immediately from all cables and apparatus lying
within thirty meters of the installation and all sources of ignition shall also be removed from the said area and normal
work shall not be resumed unless the area is made gas-free.
(3) The fixed gas detection system for hydrocarbons and hydrogen sulphide gas, if present shall be provided at
suitable locations in Gas Collection Station and Gas Compression Plant where there is likelihood of hazard due to gas
leakage to continuously monitor the presence of flammable or toxic gases and to alert persons and initiate action
manually or automatically to minimize the probability of exposure of persons and consequences of fire.
(4) For production installations other than those specified under sub-regulation (3), provision of fixed gas detection
system shall be decided based on assessment of risk due to gas leakage and a record of every such decision along with
sufficient justification shall be maintained.
(5) Portable gas detectors for hydrocarbons and hydrogen sulphide gas, if present, shall be provided at the
installation to ascertain the presence of gases before issuing work permit and for use in areas not covered by fixed gas
detection system.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 85
(6) On detection of hydrogen sulphide gas, all persons on and near the well head, drill floor, shale shaker area, mud
pump and tank shall put on suitable escape breathing apparatus of standards, IS 10245 Part 1 or IS 10245 Part 2 of the
Bureau of Indian Standards.
(7) All persons other than those required for control measures shall be withdrawn to a safe area.
(8) Thorough checks with hydrogen sulphide gas detectors shall be made and normal operations shall not be
resumed unless the area has been examined and declared gas free by the installation manager.
(9) Particulars of every occurrence as to where and when the flammable gas was found, when it was removed, and
the percentage thereof shall be recorded and maintained at the installation by the person who had done the examination.
96. Safe distances.- (1) No person shall smoke or be permitted to smoke within thirty metres of any well,
separator, petroleum storage tank or other source of flammable gases.
(2) In every mine, no smoking areas shall be clearly demarcated.
(3) No naked light or open flame or spark shall be permitted within thirty metres of any well or any place where
petroleum is stored except with the permission of the manager as granted under sub-regulation (1) of regulation 94.
(4) No flame type treater, crude oil treater or other flame-type equipment shall be placed or located within thirty
metres of any well, separator, petroleum storage tank, except where such flame type equipment is fitted with a flame
arrestor.
(5) Separation distances between blocks or production facilities shall be maintained as per the OISD-STD-118 or its
revised version or any other standard specified by the Chief Inspector by a general or special order based on quantitative
risk assessment.
97. Precautions against fire.-(1) Dead leaves or dry vegetation shall not be allowed to accumulate or remain,
and combustible materials other than materials required for use within a period of twenty-four hours shall not be stored,
within a distance fifteen meters from any oil or gas well or fuel tank storage area.
(2) Where an internal combustion engine is located within thirty metres of any well, separator or storage tank, -
(a) its exhaust pipe shall be insulated or sufficiently cooled and the end of the exhaust pipe shall be
directed away from the well head; and
(b) its exhaust manifold shall be shielded to prevent its contact with liquids or gases which might otherwise
fall on it.
(3) Where a diesel engine is located within thirty metres of a well, it shall be provided with an air intake shut-off
valve with readily accessible remote control arrangement.
(4) Water bath treater and heater treater shall be provided with a suitable device for remote ignition of burners.
(5) All plant, machinery and derricks shall be effectively earthed for dissipation of any static electric charge.
98. Precautions during hot work such as welding, cutting or grinding .-(1) No person other than a competent
welder duly authorised by the manager shall carry out welding or cutting work requiring use of flame or electric welding
apparatus.
(2) No welding or cutting work shall be undertaken by any welder in any classified hazardous area unless
a written permit, called “hot work permit” in the in the Form and method specified by the Chief Inspector for the
purpose is issued to the supervisor of the welder(s) by the manager, deputy manager or installation manager and copies
of every such hot work permit shall be maintained and kept available at the installation.
(3) The person who has issued the permit shall explain the content of the hot work permit to the concerned
welder(s) and take his or their signature thereon to that effect before the commencement of hot work.
(4) No work such as welding or cutting or grinding shall be undertaken in hazardous area unless the area is duly
examined and found gas free by a competent person authorised for the purpose and a report of every such examination
shall be recorded and maintained.
(5) During any work, like operation of welding, cutting or grinding, the welder shall ensue that-
(a) all flammable material, oil grease, oil-soaked earth are removed from the area;
(b) no matches, lighters, or smoking apparatus or any other source capable of igniting flammable gas is
present at or around his place of work:
Provided that nothing in this clause shall be deemed to prohibit the use of any suitable apparatus for the
purpose of lighting or re-lighting the welding torch;
(c) adequate precautions are taken to prevent fires being started by sparks, slag or hot metal;
(d) adequate number of suitable type of fire extinguishers and other fire fighting arrangements are made
and kept readily available for immediate use;
(e) when operations are carried out in confined space, adequate ventilation by mechanical means is
constantly provided to prevent accumulation of flammable gas; and86 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(f) when operations are carried out on pipeline which contain flammable fluid, the pipe be disconnected
or blinded, the line be positively isolated, drained or purged with inert gas or water before hot work is
undertaken and adequate precaution taken against build-up of pressure in the line while hot work is in progress:
Provided that nothing in this clause shall be deemed to prohibit the use of hot-tapping machine on a
running pipeline with prior written permission of the manager, deputy manager or an installation manager.
(6) The installation manager or competent person shall ensure that where hot work permits are issued, welding and
cutting operations are carried out in accordance with the said permits.
99. Permit to work system for electrical installations.- All work on major electrical installations shall be carried out
under “Permit to Work System” as per IS 5216 (Part 1) of the Bureau of Indian Standards or its revised version.
100. Fire-fighting equipment.-(1) Fire-fighting facilities provided under this regulations shall conform to Oil Industry
Safety Directorate Standards, OISD-STD-116, OISD-STD-117, OISD-STD-189 or their revised versions.
(2) At every drilling and work over rig, the following fire fighting arrangements and equipment shall be provided,
namely :-
(a) adequate water storage, pumping facilities, hoses and nozzles; and
(b) adequate number of appropriate portable fire extinguishers at the derrick floor, main engine area, electrical
machinery, mud tank area, diesel storage area and other vulnerable places.
(3) At every production facility, fire fighting arrangements and equipment shall be provided as per the standards
specified under sub-regulation(1).
(4) At every petroleum storage tank,a water ring main with adequate storage of water at site, pump feeding
hydrants and water monitors shall be provided and maintained.
(5) Fixed-roof storage tanks shall be provided with fixed foam connections.
(6) All installations including well head area with christmas tree shall be easily accessible so as to allow for external
fire fighting assistance without any hindrance.
(7) Adequate number of fire tenders or equipment shall be kept readily available at convenient location for use
in emergency at all time.
(8) A fire officer shall once in every three months examine every fire extinguisher and shall discharge and refill it as
often as may be necessary to ensure that is in proper working order.
(9) A report of every such examination or refilling under this regulation shall be recorded and maintained by the fire
officer.
101. Use of fire-fighting equipment.- Every person employed at any drilling - rig, work-over rig, production
facility,well head installation, storage tank or on such other work where fire-fighting equipment may be required to be
used,shall be trained in the use of such equipment and regular fire drills shall be held for this purpose.
102. Emergency plan.-(1) The manager of every mine shall frame an emergency plan for implementation in the
event of an emergency and submit a copy thereof to the Regional Inspector and District Magistrate.
(2) The emergency plan shall be prepared after carrying out risk assessment of the activities in the mines in respect
to-
(a) fire;
(b) blowout, explosion, ignition, influx of inflammable or noxious gases;
(c) bursting of equipment, pipeline or uncontrolled escape of petroleum;
(d) failure of structures;
(e) chemical spillage;
(f) natural calamities;
(g) medical evacuation; and
(h) any other emergencies.
(3) The emergency plan shall contain -
(a) the action to be taken in the event of any major accident including when and how the said action is to be
taken;
(b) organisation plan clearly stating the line of command and the responsibilities of each person involved in
case of emergency situations;
(c) equipment plan such as the make, type, capacity, location, field of operation, and operating procedure in
respect of every equipment; and
(d) strategy plan specifying the number of steps to be taken in any particular case of emergency.
(4) The emergency plan shall clearly stipulate –¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 87
(a) alarm and communication system;
(b) system of notifying the authorities;
(c) the duties and responsibilities of each key personnel including measures to be adopted to avert or
minimise the consequences of the emergency;
(d) when and how the equipment shall be used and when and how the action shall be carried out;
(e) help or information that would be available from associated and external agencies including Government
agencies;
(f) guidelines for terminating the action; and
(g) plan for training of personnel and for mock-drills.
(5) The manager of every mine shall ensure that -
(a) all equipment on the installation provided for compliance with the emergency plan is maintained in a
reliable state under efficient working order and in good condition without repair;
(b) there is a written scheme prepared for the systematic examination of all emergency equipment by an
independent competent persons;
(6) The manager of every mine shall specify the nature and frequency of examination that may be carried out,
before first use of the equipment on the installation and also after any modification or repairs.
(7) The manager of every mine shall review and modify the emergency plan periodically and in particular before
any alteration is carried out and submit a copy thereof to the Regional Inspector.
CHAPTER- IX
MACHINERY, PLANT AND EQUIPMENT
103. Use of certain machinery and equipment.- (1) The owner, agent and manager of every mine shall ensure that
the appliances, equipment, machinery or other material that are used or may be used in the mine are of sound
construction and of a type and specifications conforming to an Indian or international standard identified for the purpose:
Provided that such appliances, equipment, machinery or other material shall not be used in the mine unless the same
has been tested and passed the tests as per the above applicable standards and the manager has kept a record of the type,
details of specification, reference of the particular standards, test criteria as per the standards and status of testing, place
of testing, copies of test report(s) and any other relevant details.
(2) Code of practices and standard operating procedures for appliances, equipment, machinery or other material
shall also be followed.
104. Use of mobile cranes.- (1) Mobile crane shall not be used in mines for lifting loads beyond its rated capacity.
(2) Mobile cranes used in mines shall be provided with-
(a) a safe load indicator to give warning when overload occurs.
(b) a load radius indicator to indicate appropriate safe working load and radius which is clearly visible to
the crane operator.
(c) motion limit devices to limit hoisting, swinging and boom extending; and
(d) effective audio visual alarm which shall get activated automatically whenever the crane is reversed.
(3) The crane operator shall have a clear view of the load being handled and where it is not practicable to do so,
suitable signaling system shall be provided for giving signals for safe operations.
(4) Slings as per IS 2762 of the Bureau of Indian Standards or its revised version shall only be used with the mobile
cranes.
(5) Only competent and trained crane operator shall be permitted to operate the mobile cranes in the mines.
(6) Mobile crane shall be examined by a competent person at such interval and in accordance with such procedure
as laid down by the manager or deputy manager and the results of such inspection shall be recorded by the person making
the inspection.
105. Lifting appliances and gears.-(1) Lifting appliances and gears system intended to be used in mines shall be
properly maintained and operated to ensure safety of the persons.
(2) The competent persons authorised to operate the lifting appliances and gears in mines shall ensure that -
(a) the design, construction and installation of lifting appliances, gears and ropes are in accordance with
standard specified by the Chief Inspector by a general or special order in writing; and88 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(b) selection of appliances and gears are suitable for the purpose for which they are intended for use and
shall also be load tested for its rated capacity.
(3) Before any person is engaged to operate the lifting appliances and gears in mines, he shall be imparted job
related training.
106. Classification of hazardous area.-(1) Hazardous area in oil mines shall be classified into different zones as
specified in the Schedule.
(2) The manager of every mine shall ensure that –
(a) a plan showing the same features as required under clause (b) of sub-regulation (1) of regulation 9 and
also the different classes of hazardous zones of the mine, as classified under sub-regulation (1), shown in distinct
colour wash, is maintained;
(b) different classes of zones are distinctly marked at actual places in the field by suitable notice boards or
other effective means; and
(c) all persons employed in the mine are made aware of the dangers associated and precautions to be taken
in case of different classified hazardous zones.
107. Use of electrical equipment in hazardous area.-(1) No electrical appliance, equipment or machinery
including lighting apparatus shall be used in zone “0” hazardous area.
(2) The owner, agent and manager of every mine shall ensure that the electrical appliances, equipment, machinery
or other material that are used or may be used in zone “1” or zone “2” hazardous areas of the mine are of a type and
specifications conforming to an Indian or international standard identified for the purpose:
Provided that such appliances, equipment, machinery or other material shall not be used in zone “1” and zone “2”
hazardous areas of the mine unless the same has been tested and passed the tests as per the above applicable standards
and the manager has kept a record of the type, details of specification, reference of the particular standards, test criteria as
per the standards and status of testing, place of testing, copies of test report(s) and any other relevant details.
108. General provisions about construction and maintenance of machinery.- All parts and working gear
whether fixed or moveable including the anchoring and apparatus used as or forming part of the equipment of a
mine and all foundations in or to which any such appliances are anchored or fixed shall be of good construction,
suitable material, adequate strength and free from visible defect and shall be properly maintained.
109. Maintenance system.-(1) All machinery and equipment in the mine shall be maintained in an efficient
working order and kept in good repair.
(2) The manager of every mine shall ensure that a procedure is established for the maintenance of machinery and
equipment.
(3) The procedure referred to in sub-regulation (2) shall -
(a) specify the nature and frequency of examination;
(b) provide for an examination to be carried out, where appropriate, before the machinery and
equipment is first used on the installation and also after major modification or repair.
(4) The examination referred to in sub-regulation (3) shall mean critical scrutiny of machinery and equipment, in
or out of service, using suitable techniques, including testing-
(a) to assess its suitability for the purpose for which these are to be used;
(b) to assess its actual condition; and
(c) to determine any remedial measures.
(5) The procedure established under this regulation shall include a plan for implementation of the remedial
measures identified.
(6) All measuring gadgets, meters and relief valves shall be calibrated at intervals specified by the manufacturers.
110. Internal combustion engines.-(1) Internal combustion engines of over thirty horse power shall be provided
with means, other than manual, for starting them:
Provided that nothing in this sub-regulation shall be deemed to prohibit manual starting in an emergency.
(2) Where compressed air is used for starting the engine, a non-return valve shall be provided in the compressed
airline as close to the engine as practicable.
(3) The exhaust system of the engine shall be provided with suitable device to prevent discharge of open flame
and sparks from the exhaust.
(4) Adequate precaution shall be taken to prevent accumulation of flammable vapour near the internal
combustion engine.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 89
(5) The electrical accessories of an internal combustion engine shall comply with the provisions of the Central
Electricity Authority (Measures Relating to Safety and Electric Supply) Regulations, 2010.
111. Apparatus under pressure.-(1) The manager of every mine shall ensure that Oil Industry Safety Directorate
Standard, OISD–STD-128 or its revised version is followed for operation and maintenance of apparatus under pressure.
(2) All apparatus used as or forming part of the equipment of a mine which contains or produces air, gas,
petroleum or steam at a pressure greater than atmospheric pressure shall be so constructed, installed and maintained as to
obviate any risk of fire, bursting, explosion or collapse or the production of noxious gases.
(3) Every air receiver or container or separator used for storage of petroleum or gas or steam under pressure shall
be fitted with a safety valve and pressure measuring device which shows pressure in excess of the atmospheric pressure.
(4) Before an air receiver or a container containing petroleum or gas or steam is cased in or put in commission, a
competent person shall subject it to a hydraulic test at a pressure at least one and half times of the maximum permissible
working pressure and similar test shall be made after every renewal or repair and in any case at intervals of not more
than five years or at such shorter intervals as may be required by the Regional Inspector, and the results of every such
test shall be recorded by the competent person carrying out the test and countersigned and dated by the manager, deputy
manager or installation manager.
(5) The discharge line of a pressure apparatus shall be provided with a pressure relieving safety device.
(6) There shall be no valve or fitting between the pressure apparatus and its pressure relieving safety device or
between the device and point of discharge, as would render the device ineffective.
(7) The pressure relieving safety device shall be set to open at a pressure not exceeding ten per cent above the
maximum allowable working pressure.
(8) The pressure relieving safety device shall be tested and calibrated at least once in a year and record of such test
shall be maintained at the mine.
(9) Every in-coming gas line connected to any compressor shall be provided with a shut-off valve at a distance
outside the compressor shed.
(10) No repairs shall be undertaken in respect of any gas compressor and pipelines and fittings connected to it
unless the control valves of the inlet and discharge lines are closed and securely locked.
112. Precautions regarding moving parts of machinery.-(1) Every winch shall be provided and used with a
stopper, pawl or other reliable holder.
(2) Every flywheel and every other dangerous exposed part of any machinery used as or forming part of the
equipment shall be adequately fenced by suitable guards of substantial construction to prevent danger and such
guards shall be kept in position while the parts of the machinery are in motion or in use but they may be removed for
carrying out any examination, adjustment or repairs if adequate precautions are taken.
(3) No person shall be allowed to repair, adjust, clean or lubricate machinery in motion where there is risk
of injury.
(4) No person shall be allowed to shift or adjust a driving belt, chain or rope while the machinery is in motion
unless a proper mechanical appliance is provided for the purpose.
(5) No person in close proximity to moving machinery shall wear or be permitted to wear loose outer clothing.
(6) No unauthorised person shall be permitted to enter in any engine room, including gas turbine, compressor, or
other machine area, or in any way interfere with the machinery.
113. Engine rooms and their exits.-(1) Every engine, motor, compressor, turbine and pump room, and every
room in which highly flammable materials are stored shall be kept clean, and be provided with at least two exits.
(2) Every exit shall be clearly marked, properly maintained and kept free from obstruction.
114. Working and examination of machinery.-(1) No machinery shall be operated by any person, otherwise
than by or under the constant supervision of a competent person.
(2) Every person in charge of any machinery, apparatus or appliance shall before commencing work ensure that
it is in proper working order and if he observes any defect therein, he shall immediately report the fact to the
installation manager or other competent person.
(3) Every person in-charge of an air-receiver shall see that no extra weight is added to the safety valves and that
the permissible pressure of the air is not exceeded.
(4) A competent person or persons appointed for the purpose shall, once at least in every seven days, make a
thorough inspection of all machinery and plant in use, and shall record the result thereof.
(5) In respect of electrical machinery and plant, the competent person shall be a person holding qualifications
specified in the Central Electricity Authority (Measures Relating to Safety and Electric Supply) Regulations, 2010.90 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
CHAPTER - X
GENERAL SAFETY PROVISION
115. Codes of practice.- (1) The manager of every mine shall, before introducing any machinery or new
operation connected with his mine, frame and enforce “codes of practice”, not being inconsistent with the Act or these
regulations, for each such machinery or operation, as the case may be.
(2) The codes of practice shall be framed with due regard to the type, size and capacity of the machinery or
operation in use and prevailing local conditions and a copy of the same shall be submitted to the Regional Inspector, who
may at any time, by an order in writing, require such modifications in the codes as he may specify therein:
Provided that in mines where such machinery are already in use or operation(s) in practice, the aforesaid codes of
practice shall be framed and enforced within ninety days from the date of coming into force of these regulations.
(3) The codes of practices, inter-alia shall provide for–
(a) safe operating procedures for the machinery or operation to which it relates to;
(b) examination and testing of the machinery before first use after installation, re-installation, modification,
alteration or repair;
(c) schedule and nature of examination and testing of the machine, including its sub-assemblies, so as to
ensure its safe operation;
(d) the manner in which the records of examination shall be kept.
(4) The owner, agent or manager of every mine shall hand over copies of such code of practices to concerned
officials and ensure effective enforcement thereof.
(5) A copy of the codes of practice framed under sub-regulation (3) shall always be kept in the office of the mine.
116. Housekeeping.- (1) Loose materials, which are not required for use, shall not be placed or left so as to
dangerously obstruct workplaces and passage-ways.
(2) All projecting nails and ends of railings shall be bent or covered with protection to prevent injury.
(3) Scrap, waste and rubbish shall not be allowed to accumulate in work places, access or egress.
(4) Workplaces and passage-ways that are slippery owing to oil, mud or other causes shall be cleaned up and
made safe.
(5) Portable equipment shall be returned after use to its designated storage place.
(6) Equipment, tools and small objects shall not be left lying about where they could cause an accident
either by falling or causing person to trip.
117. General lighting.- (1) Adequate general lighting arrangements shall be provided during working hours at the
following places, namely:-
(a) where the natural lighting is insufficient;
(b) derrick floor;
(c) driller’s stand and control panel;
(d) monkey board;
(e) every engine and pump house;
(f) derrick sub-structure near blowout preventer controls;
(g) every place where persons are to work;
(h) every means of escape, access or egress.
(2) The lighting provided in a mine shall as far as possible be so arranged as to prevent glare or eye strain.
118. Electric lighting.-(1) Every electrical lighting apparatus used in hazardous area of a mine shall be of such
type and specifications conforming to an Indian or international standard identified for the purpose:
Provided the such apparatus shall not be used in hazardous area of the mine unless the same has been tested and
passed the tests as per the above applicable standards and the manager has kept a record of the type, details of
specification, reference of the particular standards, test criteria as per the standards and status of testing, place of testing,
copies of test report(s) and any other relevant details.
(2) The lighting system installed in the mine shall comply with the provisions of the Central Electricity Authority
(Measures Relating to Safety and Electric Supply) Regulations, 2010.
119. Standards of lighting.- The standard of lighting to be provided in any specified area or places in a mine
shall be as per Oil Industry Safety Directorate Recommended Practices, OISD-RP -149 or its revised version.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 91
120. Emergency lighting.- Adequate number of self contained portable hand lamps of the standard specified by
the Chief Inspector, by a general or special order in writing shall be kept available for immediate use in emergency.
121. Supply and use of protective footwear.-(1) No person shall go into work or be allowed to go into work in a
mine unless he wears a protective footwear of a type and specifications conforming to an Indian or international standard
identified for the purpose:
Provided that such footwear shall not be used in the mine unless the same has been tested and passed the tests as
per the above applicable standards and the manager has kept a record of the type, details of specification, reference of the
particular standards, test criteria as per the standards and status of testing, place of testing, copies of test report(s) and any
other relevant details.
(2) Protective footwear referred to in sub-regulation(1) shall be supplied by the owner, agent or manager at
interval not exceeding one year or such other intervals as the Chief Inspector may specify by a general or special order in
writing:
Provided that where such footwear is damaged during its legitimate use it shall be immediately replaced free of
cost.
122. Supply and use of protective helmet.- (1) No person shall go into or work or be allowed to go into work in
a drilling rig or work-over rig or rig building or rig dismantling or at such other place of work where there is a hazard
from flying or falling objects unless he wears a helmet manufactured as per applicable Indian standard and the helmet of
a type and specifications conforming to an Indian or international standard identified for the purpose:
Provided that such helmets shall not be used in the mine unless the same has been tested and passed the tests as
per the above applicable standards and the manager has kept a record of the type, details of specification, reference of the
particular standards, test criteria as per the standards and status of testing, place of testing, copies of test report(s) and any
other relevant details.
(2) The helmet referred to in sub-regulation (1) shall be supplied at intervals not exceeding three years by the
owner, agent or manager who shall at all times maintain a sufficient stock of helmets in order to ensure immediate supply
as and when need for the same arise:
Provided that when a helmet is damaged during its legitimate use, it shall be immediately replaced.
(3) The owner, agent or manager shall provide protective footwear and helmet free of charge.
123. Protective equipment.-(1) Every person engaged in the operations and every other person who may be
exposed to the risk of injury, poisoning or disease arising from the operations shall be provided with -
(a) depending upon the risk, suitable protective equipment including respiratory protective equipment, eye
protectors, gloves, overalls and aprons; and
(b) suitable protective outer clothing for use in rain and extreme weather conditions.
(2) All the protective equipment under sub-regulation (1) shall be supplied free of charge.
(3) Every person provided with protective equipment shall use the same while at work.
124. Protection against noise.-(1) The owner, agent or manager shall take steps to reduce the noise level and to
reduce the exposure of work persons to noise.
(2) No person shall be allowed to work without appropriate ear protection in an area if he is exposed to an
equivalent continuous noise level exceeding 90 dB(A).
(3) No person shall enter or be allowed to enter an area in which the sound level is 140 dB(A) or more.
(4) The Chief Inspector may, from time to time, by notification in the Official Gazette, specify the permissible
noise exposure in any area or place in a mine.
125. Communication.-(1) Efficient means of communication shall be provided and maintained in good working
order between manned installations including the office of the manager and other places of work and wherever possible,
communication shall be by radio telephone and an alternative means of signaling shall also be provided.
(2) Equipment for external communication shall be chosen on the basis of operational needs, type of activity and
defined situations of hazard and accident.
(3) Communication equipment and associated power supply shall be designed and protected so as to remain
functional in situations of hazard and accident.
(4) The communication and signaling system installed in the mine shall comply with the provisions of the Central
Electricity Authority (Measures Relating to Safety and Electric Supply) Regulations, 2010.
126. Safety while working at height.- Where any person is working at more than 1.8 meters height and where
likelihood of fall hazard is there, the owner, agent or manager shall provide a safety belt with full body harness of
standard as per IS 3521 of the Bureau of Indian Standards or its revised version which shall be attached by means of a
lifeline to a fixed anchor.92 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
127. Precautions against toxic dusts, gases and ionizing radiations.-(1) The emission of toxic dusts, gases
fumes and ionising radiation shall be prevented or controlled at source as far as reasonably practicable.
(2) Every person liable to be exposed to toxic dusts, gases, fumes and ionising radiation shall be instructed about
the safe working methods and techniques by a competent person.
(3) The permissible limits of exposure to toxic dusts, gases fumes and ionising radiations shall be as per
guidelines of the Central Government in the Ministry of Environment, Forests and Climate Change.
128. Safety warning signs.-(1) Storage area and containers of toxic, corrosive, flammable, poisonous and
radioactive material shall be properly labelled and appropriately stored according to Material Safety Data Sheet content.
(2) Warning signs shall be posted to denote any hazardous situation.
(3) Warning signs shall be posted in areas where the use of personal protective equipment is required.
(4)Identification signs shall be clearly posted to locate emergency equipment and directions of escape route.
(5) Pipelines carrying steam or fluid at high pressure shall be clearly identified.
129. Protection against pollution of environment.-(1) Guidelines issued by the Central Government in the
Ministry of Environment, Forests and Climate Change shall be followed before any fluid is discharged into sea or fresh
water structure or any water body.
(2) Any oil discharged from a well during its completion, testing and repairs shall be collected in suitably
constructed and adequately fenced disposal pits or tanks suitably located.
(3) No disposal pits shall be constructed within forty-five metres of any railway, public road or of any public
works or of other permanent structure not belonging to the owner.
(4) Untreated sewage, formation water, oil, drilling fluid, waste, chemical substances or refuse from a well, tank
or other production installation shall not be permitted, -
(a) to create hazard to public health and safety;
(b) to run into or contaminate any fresh water structure or body of water or to remain in a place from
which it might contaminate any fresh water or body of water; and
(c) to run over or damage any land, highway or public road.
(5) Before any fluid is discharged into sea or fresh water structure or any body of water, it shall be treated and
samples of fluid at regular interval shall be obtained and analysed and the results of such analysis shall be maintained by
the person collecting the sample and analysing the same.
(6) No scrap, surplus or unused material shall be permitted to be dumped or disposed off in the sea or in the
vicinity of any installation.
(7) (a) Gas produced at any installation shall not be discharged to the atmosphere unless burnt in accordance with
clause (b).
(b) Gas to be burned, referred to in clause (a) shall be discharged from a flare line in the following
manners, namely:-
(i) flare-stack height and safe distance shall be based on heat radiation study and risk factor
considerations based on applicable Indian or International standards or guidelines issued by the Central
Government in the Ministry of Environment, Forests and Climate Change.
(ii) the flare-line shall be adequately anchored and provided with suitable means to prevent
extinction of the flame;
(iii) when the gas-flow is intermittent, the flare-line shall be provided with a remote
controlled electrical ignition device or any other suitable device to ensure continuous ignition of any
gases.
130. Fencings.-(1) The well on land shall be kept securely fenced with access gates securely locked.
(2) The protected area surrounding every drilling or work over rig shall be provided with fence of not less than 1.8
meters in height.
(3) Permanent installation shall be provided with protective wall of not less than 1.8 meters in height.
(4) Precaution shall be taken to prevent any unauthorised person from access to any place which has been duly
fenced.
(5) Every fence shall once in every fourteen days be examined by a competent person and a report of every such
inspection shall be maintained by the person who made the examination and made available at site.
131.Safety Management Plan.- (1) The owner, agent and manager of every mine shall prepare and implement
safety management plan in respect of all operations of the mine in line with the health, safety and environment policy
duly approved by the competent authority of the organization and the same should be made in such a manner that-
(a) the requirements of the Act and of these regulations, bye-laws and orders made thereunder are¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 93
complied with in relation to any activity or in connection therewith;
(b) the Safety Management Plan shall be prepared in English and in Hindi, if English is not
understood by the relevant employees.
(c) an organisational structure is in place with the aim of ensuring safety and health performance;
(d) the risks to safety and health are evaluated and measures are taken to reduce the risk to persons
and damage to machinery or equipment likely to be affected;
(e) appropriate controls are in place to ensure promotion of safety and health;
(f) it provides for safety manuals, rules and regulations;
(g) it provides for standard operating procedures for all critical activities;
(h) it provide for the identification of hazards and assessment of risks and measures to eliminate the
identified hazards risks;
(i) it provides for inspection, testing and maintenance of the equipment and machinery;
(j) it provide the detail procedures for – operational activities, pre-start up safety review
mechanisms, work permit system, statutory trainings, mechanical integrity program, inspection and testing,
incident investigation, off-the job safety, safety records, health hazard data;
(k) it provides for Management of Changes related to process and equipment as per Oil Industry
Safety Directorate Guidelines, OISD-GDN-178;
(l) it provides for written action plan to implement employees’ participation through safety
committees;
(m) it provides for emergency preparedness and response plan;
(n) it provides for adequate communication and safety displays ;
(o) it provides for any other matter that is necessary to ensure safety and occupational health of the
personnel working in the mine;
(p) it provides for bridging document for contractual works/services;
(q) it provides for inspection, monitoring, audit, review, training and continual sustainable
improvement as per applicable Indian or international standards and practices; and
(r) it provides for any other activity or operation which the Chief Inspector may specify in writing.
(2) The owner, agent or manager shall ensure that a copy of safety management plan shall be made available at all
the installations of the mine.
(3) A copy of the safety management plan referred to in sub-regulation (2) shall be submitted to Chief Inspector
and Regional Inspector within one hundred and eighty days from the date of coming into force of these regulations.
(4) The owner, agent or manager of every mine shall arrange to carry out internal safety audits for every
installation of the mine by duly appointed team at intervals specified for the purpose in the safety management plan:
Provided that first safety audit for every such installation shall be completed within one year of coming into
force of these regulations.
(5) Reports of every audit carried out under sub-regulation (4) shall be maintained.
CHAPTER - XI
MISCELLANEOUS
132. Contractors, designer and service providers.-While hiring contractor, designer and service provider, the
owner and the agent shall ensure that the contractors and the service providers as the case may be, are qualified to carry
out the requirements under the Act, or the rules, regulations, bye laws or orders made thereunder, and shall reasonably
ensure that such contractor, designer and service provider comply with the requirements or duties assigned to them at the
mine.
133. General safety.- No person shall negligently or willfully do anything likely to endanger life or limb in the
mine or negligently or willfully omit to do anything necessary for the safety of the mine or of the persons employed
therein.
134. Safety and health education and instructions.- In every mine, safety and health education and instruction
programs shall be organised regularly to make the workers safety conscious and instill an awareness of occupational
safety and health at every level.94 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
135. Place of accident not to be disturbed.- (1) Whenever there occurs in a mine an accident causing loss of life
or serious bodily injury to any person, the place of accident shall not be disturbed or altered before the arrival or without
the consent of the Chief Inspector or the Inspector to whom notice of the accident is required to be given under
subsection (1) of section 23 unless such disturbance or alteration is necessary to prevent any further accident, to remove
bodies of the decease or to rescue any person from danger, or unless discontinuance of work at the place of accident
would seriously impede the working of the mine:
Provided that where the Chief Inspector or the concerned Inspector fails to inspect the place of accident within
seventy-two hours of the time of the accident, work may be resumed at the place of accident.
(2) Before the place of accident involving a fatal or serious accident is disturbed or altered due to any reason
whatsoever, a sketch of the site illustrating the accident and all relevant details shall be prepared in duplicate and such
sketch shall be duly signed by the manager or assistant manager, safety officer and the workmen’s inspector or, where
there is no workmen’s inspector, by a work person nominated by the workers in this behalf, and such sketch shall also be
supported by the photographs of the place of accident:
Provided that if the place of accident is disturbed or altered to prevent further accident or to rescue persons from
danger before the sketch could be prepared, the same shall be prepared immediately thereafter, giving all relevant details
as existed before the place was disturbed or altered.
(3) One of the authenticated sketches shall be delivered or sent to the concerned Inspector.
136. Pointing out of contraventions detected during inspections.-(1) If the Chief Inspector or an Inspector
during his inspection of any mine, finds or comes to know of any contravention of any provisions of the Act or the
regulations, rules, bye-laws or orders made thereunder, he shall either himself intimate or cause the same to be intimated
to the owner, agent or manager of the mine, of such contravention for their rectification.
(2) The owner, agent or manager shall, within three days of the receipt of intimation under sub-regulation (1),
display the contents thereof on the notice board of the mine for a period of at least fifteen days.
(3) The owner, agent or manager of the mine shall, within a period not exceeding thirty days from the date of
receipt of the intimation under sub-regulation (1), intimate to the Regional Inspector the action taken to remedy each of
the contraventions and the manner in which such contraventions have been remedied.
(4) The agent or manager or in their absence the next senior most official of the mine shall accompany the Chief
Inspector or Inspector during his inspection and note down immediately the contraventions pointed out by him on the
spot.
(5) The owner, agent or manager of the mine, shall as soon as possible, intimate to the Chief Inspector or the
Inspector who made the inspection, details of action taken to remedy the contraventions, intimated under sub-
regulation(1).
137. Chief Inspector to exercise power of Regional Inspector.- Any power granted under these regulations to
the Regional Inspector may be exercised by the Chief Inspector or any other Inspector authorized in writing in that behalf
by the Chief Inspector.
138. Signing of Returns, Notices and Correspondence.- All returns and notices required under or
correspondence made in connection with the provisions of the Act and of the regulations or orders made thereunder shall
be signed by the owner, agent or manager of the mine:
Provided that in case of submission of the returns, notices and correspondences in electronic form, the owner,
agent and manager shall ensure that the same is digitally signed and not liable to alteration or tampering and secured in
such a manner as to facilitate retrieval by owner, agent, manager and the Chief Inspector or an Inspector:
Provided further that the owner, agent or manager may, by a power of attorney, delegate these function to any
other specified person:
Provided also that in respect of notice of accident, the manager may delegate this function by written authorisation
to any deputy manager or installation manager.
139. Reports, records and registers.- The reports, records and registers required to be maintained under these
regulations shall be maintained in interleaved bound paged registers kept for the respective purposes and signed by the
concerned competent person or official, as the case may be and countersigned by the manager:
Provided that in case of maintenance of reports, records and registers in electronic form, the owner, agent and
manager shall ensure that the same is digitally signed and not liable to alteration or tampering and secured in such a
manner as to facilitate retrieval by owner, agent, manager and the Chief Inspector or an Inspector:
Provided further that the manager may authorize a deputy manager or installation manger to countersign any
reports, records or register on his behalf, except in cases where the manager is specifically required under these
regulations to countersign a report or record or register.
140. Permissions, etc. granted by the manager.- Every manager on taking over charge of a mine shall review all
permissions granted in writing under these regulations by his predecessor(s); and if he finds them to his satisfaction, he¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 95
shall confirm the same by countersigning the permissions individually or issue fresh ones or cancel them, as the case may
be.
141. Publication of orders, forms and instructions .- Orders, forms and instructions under these regulations
shall be published in the Official Gazette and by other suitable means as specified by the Chief Inspector.
142. Power to relax.- Where in the opinion of the Chief Inspector, the conditions pertaining to a mine are such as
to render compliance with any conditions contained in these regulations which are not reasonably practicable, he may by
an order in writing and subject to such conditions as he may specify therein grant exemption from the said provisions.
143. Appeal to Chief Inspector.- An appeal may be preferred against an order made by the Regional Inspector
under any of these regulations, to the Chief Inspector who may confirm, modify or cancel the order and every such
appeal shall be preferred within fifteen days of the receipt of the order by appellant.
144. Appeal to Committee.-(1) An appeal may be preferred against any order of the Chief Inspector within
twenty days of the receipt of the order by the appellant to the Committee constituted under section 12 of the Act.
(2) Every order of the Chief Inspector against which an appeal is preferred under sub-regulation (1) shall be
complied with pending final decision of the Committee:
Provided that the Committee may, on application by the appellant, suspend the operation of the order appealed
against, pending disposal of the appeal.
SCHEDULE
(See regulation 106)
CLASSIFICATION OF HAZARDOUS AREA IN OIL MINE
(cid:1) Zone “0” : This is an area in which hazardous atmosphere is continuously present.
(cid:1) Zone “1” : Any area in which hazardous atmosphere is likely to occur under normal operating conditions.
(cid:1) Zone “2” : An area in which hazardous atmosphere is likely to be present under abnormal operating
conditions.
i. DRILLING AND WORKOVER OPERATIONS:-
(1) Well – head area:
(i) When the derrick is not enclosed and the sub-structures is open to ventilation, the area in all directions
from the base of rotary table extending up to 3.0 metres shall be zone “2” hazardous area. Any cellars,
trenches and pits below the ground level shall be zone “1” hazardous area; the area lying up to 3.0 metres
in horizontal direction from the edge of any cellars, trenches on pit and 0.5 metres vertically above the
cellars, trenches on pit shall be zone “2” hazardous area.
(ii) When the derrick floor and substructure are enclosed, the enclosed substructure below the derrick floor,
including collars, pits or sumps below the ground level, shall be zone “1” hazardous area; the enclosed
area above the derrick floor shall be zone “2” hazardous area.
(2) Mud Tank and Channel:
The free space above the level of mud in tank and channel shall be zone “1” hazardous area; the area in a radius
of 3.0 metres in all direction from the edge of mud tank and channel shall be zone “2” hazardous area.
(3) Shale Shaker:
(i) The area within a radius of 1.5 metres in all directions from the shale shaker in open air shall be zone “1”
hazardous area. The area beyond 1.5 metres and up to 3.0 metres in all directions from the shale shaker
shall be zone “2” hazardous area.
(ii) When the shale shaker is located in an enclosure, the enclosed area shall be zone “1” hazardous area to
the extent of the enclosure. The area outside the shale shaker and up to 1.5 metres in all directions from
the shale shaker shall be zone “2” hazardous area.
(4) Degasser:
The area within a radius of 1.5 metres from the open end of the vent extending in all directions shall be zone
“1”; the area beyond 1.5 metres and up to 3 metres in all directions from the open end of vent shall be zone “2”
hazardous area.
(5) Degasser and Desilter:
The area within a radius of 1.5 metres in all direction from the Desander and Desilter location in open air shall
be zone “2” hazardous area.96 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(6) Effluent Pit and Open sump:
The free space above the level of flammable liquid within the effluent pit on sump shall be zone “1” hazardous
area; the free space lying up to 3.0 metres in hazardous direction form the edge of any effluent pit or sump and 5.0
metres vertically above the effluent pit or open sump shall be zone “2” hazardous area.
B. OIL WELLS:
(1) Flowing Well:-
A well area below the ground level shall be zone “1” hazardous area; the area lying up to 3.0 metres in
horizontal direction from the edge of any cellars, trenches or pit and 0.5metres vertically above the callers
trenches on sump shall be zone “2” hazardous area.
(2) Artificially Lifted Well:-
i
( ) The area in wells equipped with sucker-rod pump to 3.0 metres above the ground level up to 3.0 metres
horizontal in all directions from the well head shall be zone – “2” hazardous area. In case of cellar, an
area below the ground level shall be zone “1” hazardous area; the area lying up to 3.0 metres in
horizontal direction from the edge of any cellars and 0.5 metres vertically above the cellars shall be zone
“2” hazardous area.
ii
( ) The area in wells equipped with submersible electric motor driven pump or hydraulic sub-surface pump
or gas lift wells shall be same as specified in clause B(1) when the well is provided with cellar or sump.
(3) Well Under Production Test:-
The area within a radius of 8.0 metres from an open discharge of petroleum bearing fluid from a well under
production test shall be zone “1” hazardous area. The area beyond zone 1 hazardous area for a future distance of
8 metres in all directions shall be zone “2” hazardous area.
(4) Well Servicing Operations:-
The area within a radius of 10.0 metres in all direction from a well-pulling and other such well servicing shall be
zone “2” hazardous area.
Provided that were cellar on sump is present; the area within the cellar on sump shall be zone “1” hazardous
area and the area up to 3.0 metres in horizontal direction from the edge of any cellars or sump and 0.5 metres
vertically above the cellars on sump shall be zone “2” hazardous area.
(5) Gas Vent:-
The area within a radius of 1.5 metres from open end of the vent extending in all direction shall be zone “1”
hazardous area and area lying within a radius beyond zone “1” hazardous area up to 3.0 metres of the vent shall
be zone “2” hazardous area.
C. OIL AND GAS PROCESSING AND STORAGE EQUIPMENT:-
(1) Oil – gas separation vessels, fire vessels, Dehydrator, stabilizer hydrocarbon recovery unit:-
i
( ) The area within a radius of 3.0 metres from any oil-gas separation vessel, fired vessel, dehydrator,
stabiliser and hydrocarbon recovery unit shall be zone “2” hazardous area.
ii
( ) Any trench or pit below the ground level shall be zone “1” hazardous area and the area lying up to 3.0
metres in horizontal direction from the edge of any trench or pit and 0.5 metres vertically above the
trench or pit shall be zone “2” hazardous area.
(2) Gas Vent:-
The area within a radius of 1.5 metres from open end of the vent extending in all direction shall be zone
“1” hazardous area and area lying within a radius beyond zone “1” hazardous area up to 3.0 metres of
the vent shall be zone “2” hazardous area.
(3) Relief Valve:-
The area within a radius of not less than 3.0 metres from discharge of a relief valve, extending in all
direction shall be zone “2” hazardous area subject to the conditions that there shall be no electrical
equipment in direct path of discharge from relief valve.
(4) Pig Trap:-
The area within a radius of 1.5 metres of pig launching/receiving trap extending in all direction shall be
zone “1” hazardous area. The area lying beyond zone “1” hazardous area and up to a radius of 3.0
metres in all directions pig launching/ receiving trap shall be zone “2” hazardous area.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 97
(5) Pump Or Gas Compressor:-
(i) Where a pump handling flammable liquid or a gas compressor located in open air or under
well ventilated shed without wells, the area lying up to 3.0 metres in all directions from the
pump or compressor shall be zone “2” hazardous area.
(ii) Where a pump or a compressor is located in an adequately ventilated building, the entire
interior of such building including an area within 1.5 metres of the vent shall be zone “2”
hazardous area.
(iii) Pits, sumps, trenches below the ground level shall be zone “1” hazardous area and the area
lying up to 3.0 metres in horizontal direction from the edge of any trench or pit and 0.5 metres
vertically above the pits, sumps or trenches shall be zone “2” hazardous area.
(6) Storage Tanks:-
(i) In case of floating roof tank, the space above the floating roof and inside the enclosures up to
top level of the enclosure wall shall be zone “1” hazardous area; the area beyond zone “1”
hazardous area and up to a radius of 4.5 metres in all directions from tank shall and shell top
shall be zone “2” hazardous area. In case of a dyke, zone “2” hazardous area shall extend
vertically up to the height of the dyke and horizontally up to the physical boundary of the
dyke.
(ii) In case of fixed roof tank, the area inside the tank and within a radius of 1.5 metres from all
opening including breather valve, dip hatch, thief hatch and safety valve shall be zone “1”
hazardous area; the area zone “1” beyond hazardous area and up to a radius of 3.0 metres in
all directions from tank shall and rood of the tank be zone “2” hazardous area. In case of a
dyke, the sump in the dyke shall be zone “1” hazardous area and an area extending vertically
up to a height of the dyke horizontally to the physical boundary of the dyke shall be zone “2”
hazardous area.
D. GENERAL:-
Wherever sampling clock or bleed off valve is fitted, the area up to 1.5 metres in all directions from the release
point shall be zone “2” hazardous area.
[F.No. S-66012/01/2008-ISH.II (VoI.III)]
PARTHA PRATIM MITRA, Principal Labour & Employment Advisor
Uploaded by the Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.